Geeniuste tagasitulek : Louis Kahni päevad Kuressaares / Toivo Tammik

Index Scriptorium Estoniae

Tammik, Toivo

2006-01-01

6. X avatakse Louis Kahni portree Kuressaare raekojas ja näitus Kuressaare linnuses, Kuressaare Linnateatris linastub arhitekti poja Nathaniel Kahni film "My architect. Son's journey" (2003). 7. X toimuva rahvusvahelise arhitektuurikonverentsi kava. 1956. a. Philadelphias kohtunud Saaremaal sündinud Louis Isadore Kahnist ja Järvamaal sündinud August Eduard Komendandist

Louis Leakey and Mary Leakey

Indian Academy of Sciences (India)

Permanent link: https://www.ias.ac.in/article/fulltext/reso/020/08/0667-0679. Keywords. Palaeoanthropology; human evolution; Louis Leakey; Mary Leakey; Africa; Olduvai gorge; fossil hominids. Author Affiliations. Rajan Gaur1. Department of Anthropology, Panjab University, Sector 14, Chandigarh UT 160 014, India ...

76 FR 38357 - Reorganization of Foreign-Trade Zone 102, Under Alternative Site Framework; St. Louis, MO

Science.gov (United States)

2011-06-30

... Zone 102, Under Alternative Site Framework; St. Louis, MO Pursuant to its authority under the Foreign.../2010) as an option for the establishment or reorganization of general-purpose zones; Whereas, the St... the City of St. Louis and St. Louis County, Missouri, within and adjacent to the St. Louis Customs and...

Responsiveness summary for the engineering evaluation/cost analysis for decontamination at the St. Louis Downtown Site, St. Louis, Missouri

International Nuclear Information System (INIS)

Picel, M.H.; Peterson, J.M.; Williams, M.J.

1991-12-01

The US Department of Energy (DOE) is responsible for conducting remedial actions at the Mallinckrodt Chemical Plant, also referred to as the St. Louis Downtown Site (SLDS), located in the city of St. Louis, Missouri. Remedial activities at the SLDS are being carried out under DOE's Formerly Utilized Sites Remedial Action Program (FUSRAP) as part of the overall cleanup planned for three noncontiguous areas in St. Louis, which are collectively referred to as the St. Louis Site. Potential response action alternatives for managing the contaminated material generated at the SLDS have been evaluated in accordance with US Environmental Protection Agency (EPA) guidance for conducting interim actions under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. An engineering evaluation/cost analysis (EE/CA) report was prepared to document this process. On the basis of the analysis presented in the EE/CA, the preferred alternative for the management of contaminated wastes generated by DOE-supported plant activities is the provision of temporary storage capacity, which can be made available by modifying an existing building (i.e., Building 116) at SLDS. This alternative would enable DOE and Mallinckrodt to coordinate efforts to prevent the uncontrolled relocation of contamination and ensure that ultimate site cleanup objectives are not complicated by plant activities implemented by Mallinckrodt. The EE/CA, dated May 1991, was issued to the general public on June 7, 1991, and a public comment period was held from June 7 through July 10, 1991, in accordance with the public participation process identified in CERCLA. Comments on the proposed action were received in writing from the Missouri Department of Health, private citizen Kay Drey, and the EPA Region 7. This responsiveness summary has been prepared to respond to issues identified in these comment letters on the proposed action

Broglie, Prof. Louis Victor de

Indian Academy of Sciences (India)

Home; Fellowship. Fellow Profile. Elected: 1951 Honorary. Broglie, Prof. Louis Victor de. Nobel Laureate (Physics) - 1929. Date of birth: 15 August 1892. Date of death: 19 March 1987. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year ...

Tribute to Louis Leprince-Ringuet

CERN Document Server

2001-01-01

Louis Leprince-Ringuet, a great figure of French science, promoter of scientific cooperation in Europe and ardent supporter of CERN, passed away on 23 December 2000 at the age of 99. This multi-facetted scholar was at the same time a director of major laboratories, a renowned scientist, an outstanding teacher, instilling a passion for physics in all his pupils, a promoter of European construction, a populariser of science, a brilliant satirist, a painter and an accomplished sportsman. As a scientist, he pioneered the study of cosmic rays, establishing himself as a world authority in the field. His memory will be honoured at CERN on 3 May. After a tribute to his life by Maurice Jacob, Professor Livio Scarsi will give a lecture on the Extreme Universe Space Observatory (EUSO) programme, one of the most ambitious projects in the field of cosmic ray physics. Louis Leprince-Ringuet (right) with John B. Adams in 1961. Thursday 3 May Main Auditorium, bldg. 500 3.30 p.m Coffee 4.00 p.m. Welcome by CERN's Direc...

Louis Leprince-Ringuet 1901-2000 A Scientist in the service of Europe

CERN Multimedia

2001-01-01

The renowned French physicist, Louis Leprince-Ringuet, writer, painter and sportsman, who would have been 100 in the spring, died in Paris on 23 December 2000. A convinced European, Louis Leprince-Ringuet supported the creation of CERN. From 1956, he was Vice-Chairman of the Scientific Policy Committee, later becoming its Chairman from 1964 to 1966. After graduating from the Ecole Polytechnique, Louis Leprince-Ringuet began his career in telecommunications as an engineer working on submarine cables. His vocation as a physicist emerged in 1929 when he met Maurice de Broglie, director of a laboratory studying X-rays. For ten years Louis Leprince-Ringuet worked as de Broglie's assistant before moving into the field of cosmic ray research. As director of a research centre devoted to nuclear physics and cosmic rays at the Ecole Polytechnique, he took part in the 1930s in elucidating the nature of these rays, which had previously been unknown. His team pioneered the use of bubble chambers and the observation of hea...

Seeds of Knowledge: The Evolution of the Louis Bromfield Sustainable Agriculture Library.

Science.gov (United States)

Miraglia, Laurie L.

The Louis Bromfield Sustainable Agriculture Library is located in Lucas, Ohio, at Malabar Farm State Park. Established in 1992, the library is jointly maintained by the Ohio State University Sustainable Agriculture Program and the Ohio Department of Agriculture. The library's namesake, Louis Bromfield, was a Pulitzer Prize-winning author and noted…

Entomologic studies after a St. Louis encephalitis epidemic in Grand Junction, Colorado.

Science.gov (United States)

Tasi, T F; Smith, G C; Ndukwu, M; Jakob, W L; Happ, C M; Kirk, L J; Francy, D B; Lampert, K J

1988-08-01

In 1986, after a St. Louis encephalitis epidemic in Grand Junction, Colorado, in 1985, vector mosquitoes in the city were surveyed to correlate their bionomics and infection rates with the occurrence of human disease. No human cases were reported, but mosquito surveillance disclosed St. Louis encephalitis virus in Culex tarsalis and Culex pipiens pipiens. Mosquitoes were collected with gravid traps designed to attract Cx. p. pipiens and with Centers for Disease Control light traps. Culex p. pipiens was the predominant vector mosquito collected and was captured chiefly in gravid traps. The Culex tarsalis population emerged and expanded approximately one month earlier than did the Cx. p. pipiens population. Consequently, Cx. p. pipiens was the predominant vector species after August. Infection rates throughout the surveillance period (June to September) were severalfold higher in Cx. tarsalis than in Cx. p. pipiens; however, in late summer, diminished numbers of Cx. tarsalis and a persistent population of Cx. p. pipiens resulted in relatively larger numbers of infected Cx. p. pipiens. Thus, the participation of Cx. p. pipiens as a St. Louis encephalitis vector would have been underestimated in previous studies employing light traps alone. These studies provide further evidence that Cx. p. pipiens-associated urban St. Louis encephalitis and rural Cx. tarsalis-associated St. Louis encephalitis cycles may coexist in the West.

Eesti mees - arhitekt Louis Kahn / Toivo Tammik

Index Scriptorium Estoniae

Tammik, Toivo

2006-01-01

1901. aastal Saaremaal sündinud mehest, kelle elutee viis USA-sse ja koostöös eestlase August Komendantiga valmisid suurepärased projektid. Eestis, Saaremaal, valmistutakse Louis Kahni päevadeks 2006. aasta oktoobris

Biography of louis braille and invention of the braille alphabet.

Science.gov (United States)

Jiménez, Javier; Olea, Jesús; Torres, Jesús; Alonso, Inmaculada; Harder, Dirk; Fischer, Konstanze

2009-01-01

Louis Braille (1809-1852) was born in France. At the age of three, he wounded his right eye with a cobbler's tool while playing in his father's workshop. No medical knowledge could save his eyesight at that time. Louis's left eye became inflamed, apparently due to subsequent sympathetic ophthalmia, and he eventually lost the sight in that eye. At the age of five, Louis Braille was completely blind. He is considered to be the inventor of a writing system by touch that bears his name, the Braille system. This revolutionary system has allowed blind people to access written culture, and it can therefore be considered a major advance in the quality of life for the blind. The immediate precursor of the invention of the Braille system was the alphabet created by Charles Barbier de la Serre (1767-1841) who created a language by touch designed for military and secret use. Louis Braille modified this alphabet into the Braille alphabet, which is practically the same one that is currently used. It required time to be recognized and to be implemented as a reading and writing method for blind people throughout the world. In 1950, UNESCO effectively universalized the Braille alphabet, and in 2005 it recognized Braille system as a "vital language of communication, as legitimate as all other languages in the world."

Presence of selected chemicals of emerging concern in water and bottom sediment from the St. Louis River, St. Louis Bay, and Superior Bay, Minnesota and Wisconsin, 2010

Science.gov (United States)

Christensen, Victoria G.; Lee, Kathy E.; Kieta, Kristen A.; Elliott, Sarah M.

2012-01-01

The St. Louis Bay of Lake Superior receives substantial urban runoff, wastewater treatment plant effluent, and industrial effluent. In 1987, the International Joint Commission designated the St. Louis Bay portion of the lower St. Louis River as one of the Great Lakes Areas of Concern. Concerns exist about the potential effects of chemicals of emerging concern on aquatic biota because many of these chemicals, including endocrine active chemicals, have been shown to affect the endocrine systems of fish. To determine the occurrence of chemicals of emerging concern in the St. Louis River, the St. Louis Bay, and Superior Bay, the U.S. Geological Survey in cooperation with the Minnesota Pollution Control Agency and the Wisconsin Department of Natural Resources collected water and bottom-sediment samples from 40 sites from August through October 2010. The objectives of this study were to (1) identify the extent to which chemicals of emerging concern, including pharmaceuticals, hormones, and other organic chemicals, occur in the St. Louis River, St. Louis Bay, and Superior Bay, and (2) identify the extent to which the chemicals may have accumulated in bottom sediment of the study area. Samples were analyzed for selected wastewater indicators, hormones, sterols, bisphenol A, and human-health pharmaceuticals. During this study, 33 of 89 chemicals of emerging concern were detected among all water samples collected and 56 of 104 chemicals of emerging concern were detected in bottom-sediment samples. The chemical N,N-diethyl-meta-toluamide (DEET) was the most commonly detected chemical in water samples and 2,6-dimethylnaphthalene was the most commonly detected chemical in bottom-sediment samples. In general, chemicals of emerging concern were detected at a higher frequency in bottom-sediment samples than in water samples. Estrone (a steroid hormone) and hexahydrohexamethyl cyclopentabensopyran (a synthetic fragrance) were the most commonly detected endocrine active chemicals in

Louis Harold Gray (1905-1965)

International Nuclear Information System (INIS)

Tomljenovic, I.

2003-01-01

15th CGPM (Conference General de Poids et Mesures) conference of 1975 accepted gray (Gy) as the unit of absorbed dose in honour of British physicist and radiation biologist Louis Harold Gray. This unit is a part of the SI system for units and measures. The idea of the article is to give a closer look into the life and work of this great scientist. (author)

[Louis Ombrédanne (1871-1956) pediatric and plastic surgeon].

Science.gov (United States)

Glicenstein, J

2015-04-01

One of the fathers of pediatric surgery in France, Louis Ombrédanne (1871-1956) was a great plastic surgeon. During his residency he was initiated to plastic surgery by Charles Nélaton (1851-1911). Both wrote two books: "La rhinoplastie" and "Les autoplasties", taking stock of these techniques in the early 20th century. In 1906, he was the first to describe the pectoral muscle flap for immediate breast reconstruction after mastectomy. He used this flap in conjunction with an axillo thoracic flap. From 1908 to 1941, Louis Ombrédanne practised pediatric surgery, most of which was devoted in reconstruction of congenital and acquire anomalies. From 1924 to 1941, he was Professor of pediatric surgery at the hospital Enfants-Malades in Paris. In 1907, Louis Ombrédanne created a prototype of an ether inhaler as a safe anesthetic device. The device was successfully used for fifty years in Europe. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

St. Louis River water quality assessment 2012, 2013

Data.gov (United States)

U.S. Environmental Protection Agency — St. Louis River Area of Concern surface water nutrient (TP, TN, NOx-N, NH4-N), dissolved oxygen, and particulate (TSS, chlorophyll a) concentration data from 2012...

St. Louis Area Earthquake Hazards Mapping Project - A Progress Report-November 2008

Science.gov (United States)

Karadeniz, D.; Rogers, J.D.; Williams, R.A.; Cramer, C.H.; Bauer, R.A.; Hoffman, D.; Chung, J.; Hempen, G.L.; Steckel, P.H.; Boyd, O.L.; Watkins, C.M.; McCallister, N.S.; Schweig, E.

2009-01-01

St. Louis has experienced minor earthquake damage at least 12 times in the past 200 years. Because of this history and its proximity to known active earthquake zones, the St. Louis Area Earthquake Hazards Mapping Project (SLAEHMP) is producing digital maps that show variability of earthquake hazards, including liquefaction and ground shaking, in the St. Louis area. The maps will be available free via the internet. Although not site specific enough to indicate the hazard at a house-by-house resolution, they can be customized by the user to show specific areas of interest, such as neighborhoods or transportation routes. Earthquakes currently cannot be predicted, but scientists can estimate how strongly the ground is likely to shake as the result of an earthquake. Earthquake hazard maps provide one way of conveying such estimates. The U.S. Geological Survey (USGS), which produces earthquake hazard maps for the Nation, is working with local partners to develop detailed maps for urban areas vulnerable to strong ground shaking. These partners, which along with the USGS comprise the SLAEHMP, include the Missouri University of Science and Technology-Rolla (Missouri S&T), Missouri Department of Natural Resources (MDNR), Illinois State Geological Survey (ISGS), Saint Louis University, Missouri State Emergency Management Agency, and URS Corporation. Preliminary hazard maps covering a test portion of the 29-quadrangle St. Louis study area have been produced and are currently being evaluated by the SLAEHMP. A USGS Fact Sheet summarizing this project was produced and almost 1000 copies have been distributed at several public outreach meetings and field trips that have featured the SLAEHMP (Williams and others, 2007). In addition, a USGS website focusing on the SLAEHMP, which provides links to project results and relevant earthquake hazard information, can be found at: http://earthquake.usgs.gov/regional/ceus/urban_map/st_louis/index.php. This progress report summarizes the

Eli Fischer-Jørgensen, Eugeniu Coseriu et Louis Hjelmslev

DEFF Research Database (Denmark)

Jensen, Viggo Bank

2015-01-01

Based on a correspondence between Eugenio Coseriu (1921-2002) and Eli Fischer-Jørgensen (1911-2010), the article discusses the importance of Louis Hjelmslev (1899-1965) for the development of the theory of Coseriu. In a letter dated 1955, Fischer-Jørgensen agrees with Coseriu in his criticism of ...... to be a slight change in Coseriu’s view on content substance. This way, the article aims to show that Fischer-Jørgensen played an important role as a critical mediator between Hjelmslev and Coseriu.......Based on a correspondence between Eugenio Coseriu (1921-2002) and Eli Fischer-Jørgensen (1911-2010), the article discusses the importance of Louis Hjelmslev (1899-1965) for the development of the theory of Coseriu. In a letter dated 1955, Fischer-Jørgensen agrees with Coseriu in his criticism...

75 FR 13808 - Missouri & Valley Park Railroad Corporation-Discontinuance of Service Exemption-in St Louis...

Science.gov (United States)

2010-03-23

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB Docket No. AB-1057X] Missouri & Valley Park Railroad Corporation--Discontinuance of Service Exemption--in St Louis County, MO On March 3... Subdivision between milepost 18.36 and milepost 20.50, near West Valley Park, St. Louis County, MO.\\2\\ The...

An Archaeological Curation-Needs Assessment for Fort Irwin, Naval Air Station, North Island, Edwards Air Force Base, Marine Corps Air-Ground Combat Center, Twentynine Palms

National Research Council Canada - National Science Library

Trimble, Michael

1997-01-01

.... Louis District, conducted an investigation of all archaeological materials and associated records in the care of NAS North Island, Edwards Air Force Base, Fort Irwin, and MCAGCC Twentynine Palms...

Very Low Birth Weight and Perinatal Periods of Risk: Disparities in St. Louis

Directory of Open Access Journals (Sweden)

Pamela Xaverius

2014-01-01

Full Text Available Objective. Very low birth weight (VLBW is a significant issue in St. Louis, Missouri. Our study evaluated risk factors associated with VLBW in this predominantly urban community. Methods. From 2000 to 2009, birth and fetal death certificates were evaluated (n=160, 189, and mortality rates were calculated for perinatal periods of risk. The Kitagawa method was used to explore fetoinfant mortality rates (FIMR in terms of birth weight distribution and birthweight specific mortality. Multivariable logistic regression was used to assess the magnitude of association of selected risk factors with VLBW. Results. VLBW contributes to 50% of the excess FIMR in St. Louis City and County. The highest proportion of VLBW can be attributed to black maternal race (40.6% in St. Louis City, inadequate prenatal care (19.8%, and gestational hypertension (12.0% among black women. Medicaid was found to have a protective effect for VLBW among black women (population attributable risk (PAR = −14.5. Discussion. Interventions targeting the health of women before and during conception may be most successful at reducing the disparities in VLBW in this population. Interventions geared towards smoking cessation and improvements in Medicaid and prenatal care access for black mothers and St. Louis City residents can greatly reduce VLBW rates.

78 FR 53247 - Approval and Promulgation of Implementation Plans; State of Missouri; St. Louis Area...

Science.gov (United States)

2013-08-29

... include amendments to sections (1) through (4) of rule 10 CSR 10-5.480 St. Louis Area Transportation... approving the State's request to amend 10 CSR 10-5.480 St. Louis Area Transportation Conformity Requirements... action'' subject to review by the Office of Management and Budget under Executive Order 12866 (58 FR...

West Nile virus: North American experience

Science.gov (United States)

Hofmeister, Erik K.

2011-01-01

West Nile virus, a mosquito-vectored flavivirus of the Japanese encephalitis serogroup, was first detected in North America following an epizootic in the New York City area in 1999. In the intervening 11 years since the arrival of the virus in North America, it has crossed the contiguous USA, entered the Canadian provinces bordering the USA, and has been reported in the Caribbean islands, Mexico, Central America and, more recently, South America. West Nile virus has been reported in over 300 species of birds in the USA and has caused the deaths of thousands of birds, local population declines of some avian species, the clinical illness and deaths of thousands of domestic horses, and the clinical disease in over 30 000 Americans and the deaths of over 1000. Prior to the emergence of West Nile virus in North America, St. Louis encephalitis virus and Dengue virus were the only other known mosquito-transmitted flaviviruses in North America capable of causing human disease. This review will discuss the North American experience with mosquito-borne flavivirus prior to the arrival of West Nile virus, the entry and spread of West Nile virus in North America, effects on wild bird populations, genetic changes in the virus, and the current state of West Nile virus transmission.

Resources for Economic Educators from the Federal Reserve Bank of St. Louis

Science.gov (United States)

Suiter, Mary C.; Taylor, Keith G.

2016-01-01

The Federal Reserve Bank of St. Louis has a long history of providing economic and financial information to the public that continues today, although the format, delivery, and amount of information have changed over the years. Today, the St. Louis Fed provides Web-based data and information services, including FRED® and FRASER®, and publications,…

"Vältimatud nuhtlused" : August Komendant, Louis I. Kahn ja arhitektuuri ning insenerikunsti keerulised suhted / Thomas Leslie

Index Scriptorium Estoniae

Leslie, Thomas

2006-01-01

Artikkel põhineb Thomas Leslie Kuressaares Louis Kahni päevadel peetud ettekandel. Louis Kahni koostöös August Komendandiga projekteeritud hoonetest pikemalt Richardsi Meditsiiniliste Uuringute laboratooriumist, Salki bioloogianistituudist (1959-1965, La Jolla, Kalifornia) ja Kimbelli kunstimuuseumist (1966-1972, Texas, Fort Worth). Bibl. lk. 75

[Could phimosis have been the cause of sexual difficulties and delayed fertility of Louis XVI (1754-1793)?].

Science.gov (United States)

Androutsos, Georges

2002-02-01

The great majority of historians agree that the marriage of Louis XVI and Marie-Antoinette was only consumated seven years after the official ceremony. This delay could have been due to a genital malformation (phimosis) of Louis XVI, a strict religious education, a traumatic childhood and the young age of the two spouses, factors that may have inhibited their sexuality. In this article, the authors try to determine whether Louis XVI was able to overcome his sexual difficulties following an operation (circumcision) or as a result of spontaneous cure.

St. Louis River Estuary 2011 - 2013 Faucet snail location data

Data.gov (United States)

U.S. Environmental Protection Agency — The dataset consists of GPS coordinates for benthic invertebrate collections made in the St. Louis River Estuary in 2011 through 2013, and information on whether and...

Louis Isidore Kahni jäljed Saaremaal / Mark Soosaar

Index Scriptorium Estoniae

Soosaar, Mark, 1946-

2006-01-01

Eesti päritolu ameerika arhitektist Louis Kahnist, tema mälestuse jäädvustamisest. Le Corbusier'i ja Kahni loomingut meenutavatest majadest Kuressaares. Kuressaare elektrijaamast, mis ehitati töödejuhataja Aleksei Võrgu jooniste järgi. Kommentaar Mart Kalmult

Forces for Failure and Genocide: The Plantation Model of Urban Educational Policy Making in St. Louis

Science.gov (United States)

Jones, Bruce Anthony

2005-01-01

This article is about policy decision making and racial politics in the St. Louis, Missouri, school district. From a research standpoint, traditional policymaking models are inadequate for explaining the evolution of school reform events in St. Louis over the past year. Teachers, principals, school staff, and parents perceive themselves to be…

Mitochondrial DNA analysis on remains of a putative son of Louis XVI, King of France and Marie-Antoinette.

Science.gov (United States)

Jehaes, E; Decorte, R; Peneau, A; Petrie, J H; Boiry, P A; Gilissen, A; Moisan, J P; Van den Berghe, H; Pascal, O; Cassiman, J J

1998-01-01

Carl Wilhelm Naundorff was buried in 1845 in Delft as Louis Charles, Duc de Normandie, 'Louis XVII'. However, the son of Louis XVI and Marie-Antoinette-Louis XVII--officially died in the Temple of Paris in 1795. In order to resolve the identity of Naundorff, mitochondrial DNA (mtDNA) D-loop sequences of his remains were compared with the sequences obtained from the hairs of two sisters of Marie-Antoinette, Marie-Antoinette herself, and with the sequences obtained from DNA samples of two living maternal relatives. The mtDNA sequence of a bone sample from Naundorff showed two nucleotide differences from the sequences of the three sisters and four differences from the sequences of living maternal relatives. Based on this evidence it becomes very unlikely that Naundroff is the son of Marie-Antoinette.

Mapping ecosystem services in the St. Louis River Estuary

Science.gov (United States)

Sustainable management of ecosystems for the perpetual flow of services beneficial to human communities requires reliable data about from where in the ecosystem services flow. Our objective is to map ecosystem services in the St. Louis River with the overarching U.S. EPA goal of ...

St. Louis: Gateway to the West for Catholic Education.

Science.gov (United States)

James, John

2003-01-01

Give a historical background to those people that helped bring Catholic education from the eastern seaboard to the West Coast. Discusses the actions of Bishop Louis Dubourg, Father Jean Pierre De Smet, Father Quickenborne, the Jesuits at Saint Mary's Mission, and others. Contains 7 references. (MZ)

Range expansion by Passer montanus in North America

Science.gov (United States)

Burnett, J.L.; Roberts, C.P.; Allen, Craig R.; Brown, M.B.; Moulton, M.P.

2017-01-01

Passer montanus became established in a small area of central North America following its introduction in 1870. P. montanus underwent minimal range expansion in the first 100 years following introduction. However, the North American population of P. montanus is now growing in size and expanding in geographic distribution, having expanded approximately 125 km to the north by 1970. We quantify the distance of spread by P. montanus from its introduction site in the greater St. Louis, Missouri-Illinois, USA area, using distributional (presence) data from the National Audubon Society Christmas Bird Count surveys for the period of 1951 to 2014. Linear regressions of the average annual range center of P. montanus confirmed significant shifts to the north at a rate of 3.3 km/year (P Linear regressions of the linear and angular distance of range center indicates significant northern movement (change in angle of mean range center; P < 0.001) since 1951. Our results quantify the extent of a northward range expansion, and suggesting a probable spread of this species northward.

Louis Neel: an example to follow

International Nuclear Information System (INIS)

Nozieres, Ph.

2004-01-01

This article is a biography of Louis Neel, a great French scientist of the twentieth century. He got achievements in many fields of physics from magnetism to condensed matter. During the second world war he designed a technique to counter the German floating mines, about 500 ships were treated and could cross seas safely. In 1956, he convinced the French atomic energy board (Cea) to settle a nuclear research center in Grenoble. In 1970, L.Neel was awarded the Nobel prize of physics for discoveries concerning antiferromagnetism and ferrimagnetism

Mapping ecosystem services in the St. Louis River estuary (presentation)

Science.gov (United States)

Management of ecosystems for sustainable provision of services beneficial to human communities requires reliable data about from where in the ecosystem services flow. Our objective is to map ecosystem services in the St. Louis River with the overarching EPA goal of community sust...

School Food Environment of Charter Schools in St. Louis

Science.gov (United States)

Linsenmeyer, Whitney; Kelly, Patrick; Jenkins, Steve; Mattfeldt-Berman, Mildred

2013-01-01

Purpose/Objectives: The purpose of this study was to explore the school food environment of charter schools in Saint Louis, Missouri. The objectives were to: (1) describe the participation of charter schools in the National School Lunch Program and (2) describe the prevalence of competitive foods in charter schools. Methods: School administrators…

Intraurban Spatiotemporal Variability of Ambient Air Pollutants across Metropolitan St. Louis

Science.gov (United States)

Du, Li

Ambient air monitoring networks have been established in the United States since the 1970s to comply with the Clean Air Act. The monitoring networks are primarily used to determine compliance but also provide substantive support to air quality management and air quality research including studies on health effects of air pollutants. The Roxana Air Quality Study (RAQS) was conducted at the fenceline of a petroleum refinery in Roxana, Illinois. In addition to providing insights into air pollutant impacts from the refinery, these measurements increased the St. Louis area monitoring network density for gaseous air toxics and fine particulate matter (PM2.5) speciation and thus provided an opportunity to examine intraurban spatiotemporal variability for these air quality parameters. This dissertation focused on exploring and assessing aspects of ambient air pollutant spatiotemporal variability in the St. Louis area from three progressively expanded spatial scales using a suite of methods and metrics. RAQS data were used to characterize air quality conditions in the immediate vicinity of the petroleum refinery. For example, PM2.5 lanthanoids were used to track impacts from refinery fluidized bed catalytic cracker emissions. RAQS air toxics data were interpreted by comparing to network data from the Blair Street station in the City of St. Louis which is a National Air Toxics Trends Station. Species were classified as being spatially homogeneous (similar between sites) or heterogeneous (different between sites) and in the latter case these differences were interpreted using surface winds data. For PM 2.5 species, there were five concurrently operating sites in the St. Louis area - including the site in Roxana - which are either formally part of the national Chemical Speciation Network (CSN) or rigorously follow the CSN sampling and analytical protocols. This unusually large number of speciation sites for a region the size of St. Louis motivated a detailed examination of

Louis de Broglie: A Prince of Science

International Nuclear Information System (INIS)

Lochak, G.

1992-01-01

Louis de Broglie was one of the physicists that change our vision of the world, Nobel Prize in 1929 for the discovery of wave properties of matter he made a synthesis of the two theories corpuscular and undulatory of matter as well as light which seemed irreconcilable at that time. The book recalls its family origins and describes the writer, the humanist as well as the scientist. But above all the scientific work is explained in simple words. 114 refs

Louis Althusser, Leo Strauss, and Democratic Leadership

OpenAIRE

Tamulis, Bron Cohen

2014-01-01

In taking up the topic of political leadership, I seek to analyze the legacy of social science in light of the sobering political events of the twentieth century. This dissertation is a composite study of the work of two philosophers, and, specifically, what they endeavored to accomplish by thinking and writing on the subject of politics. I concentrated on the post-War landscape, and the philosophers Louis Althusser and Leo Strauss, in order to analyze the way in which the figure of Machiav...

Louis Kahni mateeria, valguse ja energia arhitektuur = Louis Kahn's Architecture of Matter, Light and Energy / Anne Griswold Tyng ; tõlk. Tiina Randus

Index Scriptorium Estoniae

Tyng, Anne Griswold

2007-01-01

Louis Kahni betoonarhitektuurist (Weissi maja, 1947-1949), Yale'i kunstigaleriist (1951-1953), City Toweri projektist (1952-1958), Trentoni supelmajast (1954-1956), Salki instituudist (1959-1965, La Jolla, California), Kimbelli kunstimuuseumist (1968-1974), pealinnakompleksist Dhakas (1965-1974). Anne Griswold Tyng hakkas L. Kahni juures tööle 1945. a., tema algkooli projektist (1949-50), oma Philadelphia maja juurdeehitusest (1965-1968)

Conceptualising Childhood: Robert Louis Stevenson's "A Child's Garden of Verses."

Science.gov (United States)

Webb, Jean

2002-01-01

Discusses the construct of childhood in Robert Louis Stevenson's collection of poems, "A Child's Garden of Verses," by employing notions of child development drawn from Jean Piaget and Lev Vygotsky. Finds, from a literary perspective, Stevenson's collection located on the boundaries of romanticism and modernism. (BT)

A Clinical Case of Louis-Bar Syndrome Associated with Epilepsy in an Adolescent

Directory of Open Access Journals (Sweden)

S.I. Ilchenko

2015-02-01

Full Text Available The article presents a case of our own long-term clinical observation of Louis-Bar syndrome (congenital ataxia-telangiectasia associated with epilepsy in 15-year-old girl. Peculiarities of the course and manifestation of clinical signs of Louis-Bar syndrome, a combination with epilepsy and multi-organ involvement in this patient were determined. This case demonstrates the complexity of early diagnosis of primary immunodeficiencies in children in combination with nervous system pathology. An early verification of the diagnosis requires a careful analysis of clinical and anamnestic data in conjunction with a differential search for the causes of recurrent infectious diseases in children with neurological disorders.

Louis Kahni Päevad Kuressaares / Ingrid Mald-Villand

Index Scriptorium Estoniae

Mald-Villand, Ingrid

2006-01-01

6.-7. oktoobril toimunud üritustest, millega tähistati arhitekt Louis Kahni 105. sünniaastapäeva ja eesti inseneri August Komendanti 100. sünniaastapäeva. 6. oktoobril alustati arhitekti portree avamisega, mille oli maalinud tütar Alexandra Tyng, sama päeva õhtul avati näitus Kahni loomingust Kuressaare lossis ja linnateatris esitleti Nathaniel Kahni dokumentaalfilmi "My architect". 7. oktoobril peeti rahvusvaheline arhitektuurikonverents

Uutmoodi akadeemiline. Arhitekt Louis Kahn ja tema dialoog Kuressaare lossiga / Heie Treier

Index Scriptorium Estoniae

Treier, Heie, 1963-

2016-01-01

Tallinna Ülikooli tutvustava lause "Uutmoodi akadeemiline" raames tehtud uurimistööst Saaremaal sündinud arhitekti Louis I. Kahni loomingu hüpoteetilisest seotusest Saaremaa keskaegse arhitektuurikoolkonna hoonetega

Jaques-Louis Reverdin (1842-1929): the surgeon and the needle.

Science.gov (United States)

Fariña-Pérez, Luis A

2010-05-01

With the development and rise of abdominal laparoscopic techniques, the old Reverdin needle has had a revival, because it proved to be useful for the endoscopic closure of laparoscopic access ports, in order to lower the incidence of incisional hernias. Several new modifications of the Reverdin needle, with different names, are in the market now. This new use of an old instrument, prompted a review of the life and work of Jaques-Louis Reverdin, the Swiss surgeon trained in Paris and founder of the modern Swiss surgery. Biographical and bibliographical review of Jaques-MLouis Reverdin and his contributions to surgery Jaques-Louis Reverdin (1842-1929), born in Geneva, completed his medical studies in Paris, where he practised in several well-known hospitals such as La Pitié (with Goselin), Saint Louis (with Guérin), Lariboisiére, and Necker (with Guyon). In 1869 he published and presented in several meetings, a pioneering experience of successful free skin graft procedure, that is still performed in some cases and constitutes the first organ transplantation. In 1870 he presented his doctoral thesis "Etude sur l'uréthrotomie interne" with the expeience of his master Guyon (63 operations), gaining the Civiale prize and the bronze medal of the Paris Faculty of Medicine. He returned back to Geneva in 1872 to begin a long surgical practice and Faculty teaching, and he made seminal contributions to the knowledge of thyroid diseases, in particular on the clinical presentation of function deficiency following exeresis of the thyroid gland ( postoperative myxoedema). His contributions paralleled that made by Theodor Kocher in Bern, the surgeon that received in solitary the Nobel prize for these studies in 1909. With Jean6hyphen;Louis Prevost and Constant Picot, they founded the "Revue medicale de la Suisse romande", the most important Swiss medical journal of the 20th century. He is remembered in the field of Urology for a special needle designed to pass through a suture

33 CFR 117.669 - St. Louis River (Duluth Superior Harbor).

Science.gov (United States)

2010-07-01

... SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Minnesota § 117.669 St. Louis River (Duluth Superior Harbor). (a) The draws of the Burlington Northern railroad bridge, mile 5.7, shall open... Missabe and Iron Range Railway bridge, mile 16.3, need not be opened for the passage of vessels. The owner...

33 CFR 117.1083 - Duluth-Superior Harbor (St. Louis River).

Science.gov (United States)

2010-07-01

... SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Wisconsin § 117.1083 Duluth-Superior Harbor (St. Louis River). (a) The draws of the Burlington Northern railroad bridge, mile 5.7 at... blasts. (c) The draw of the Duluth, Missabe and Iron Range Railway bridge, mile 16.3 at Duluth, need not...

Mercury bioaccumulation assessment for the St. Louis River Area of Concern

Science.gov (United States)

Both Minnesota and Wisconsin have posted fish consumption advisories within the St. Louis River Area of Concern (SLR AOC), in part because fish have elevated mercury concentrations. To assess mercury concentrations in fish tissue within the SLR AOC relative to reference condition...

A comparative analysis of heat waves and associated mortality in St. Louis, Missouri--1980 and 1995.

Science.gov (United States)

Smoyer, K E

1998-08-01

This research investigates heat-related mortality during the 1980 and 1995 heat waves in St. Louis, Missouri. St. Louis has a long history of extreme summer weather, and heat-related mortality is a public health concern. Heat waves are defined as days with apparent temperatures exceeding 40.6 degrees C (105 degrees F). The study uses a multivariate analysis to investigate the relationship between mortality and heat wave intensity, duration, and timing within the summer season. The heat wave of 1980 was more severe and had higher associated mortality than that of 1995. To learn if changing population characteristics, in addition to weather conditions, contributed to this difference, changes in population vulnerability between 1980 and 1995 are evaluated under simulated heat wave conditions. The findings show that St. Louis remains at risk of heat wave mortality. In addition, there is evidence that vulnerability has increased despite increased air-conditioning penetration and public health interventions.

Louis L'Amour's American West. A Sound Filmstrip Program. Study Guide.

Science.gov (United States)

Peters, John; Peters, Frances

Adapted from the motion picture based on two of Louis L'Amour's novels of the American West, "The Daybreakers" and "Sackett," this filmstrip program will help secondary students interpret the meaning of the frontier experience in American history. In the first three filmstrips--"Heading West,""Staking…

Mercury bioaccumulation assessment for the St. Louis River Area of Concern (poster)

Science.gov (United States)

Elevated mercury concentrations have been documented in fish and invertebrates within the St. Louis River Area of Concern (AOC). Mercury bioavailability is affected by multiple factors, including mercury sources, sediment and water geochemistry, food web structure, individual fis...

Intensi Berwirausaha Pada Pelajar Kelas Ekstrakurikuler Kewirausahaan SMAK St. Louis 1 Di Surabaya [The Entrepreneurship Intentions of Entrepreneurship Students in Extracurricular Classes at SMAK St. Louis 1 in Surabaya

Directory of Open Access Journals (Sweden)

Gregorius Romaryo Tanubun

2016-10-01

Full Text Available The purpose of this research is to understand: (1 the influence of family on entrepreneur intention; (2 the impact of entrepreneurial study on entrepreneur intention; and (3 the difference in entrepreneurial intention among an entrepreneurial class of students at SMAK St. Louis 1 in Surabaya. The population of this research is students of an entrepreneurial class at SMAK St. Louis 1 in  Surabaya. The sampling technique used is census with 40 respondents as samples. This research is a quantitative research with multiple regression method and independent samples t-test with SPSS 23 as analysis tool. The findings of this research indicate that: (1 family variable (K reacts significantly negative towards entrepreneurial intention (IB, (2 entrepreneurial education variable (PK reacts significantly towards entrepreneurial intention (IB, and (3 no difference is found between men and women.

The mossy north

DEFF Research Database (Denmark)

Mateo, Ruben G.; Broennimann, Olivier; Normand, Signe

2016-01-01

, as predicted by theory, and whether the assembly mechanisms differ among taxonomic groups. SR increases towards the south in spermatophytes, but towards the north in ferns and bryophytes. SR patterns in spermatophytes are consistent with their patterns of beta diversity, with high levels of nestedness...... and turnover in the north and in the south, respectively, indicating species exclusion towards the north and increased opportunities for speciation in the south. Liverworts exhibit the highest levels of nestedness, suggesting that they represent the most sensitive group to the impact of past climate change...

Acceptance of the Theory of Evolution in America: Louis Agassiz vs. Asa Gray

Science.gov (United States)

Wolfe, Elaine Claire Daughetee

1975-01-01

Provides some background information on the contributions of Louis Agassiz and Asa Gray to the history of American science as these two men disagreed concerning the ideas in Darwin's "The Orgin of Species." (PB)

Louis Vivet, un cas paradigmatique des personnalités multiples et de la méthode cathartique

Directory of Open Access Journals (Sweden)

Stéphane Laurens

2006-01-01

Full Text Available A clinical case of Louis Vivet, described by Bourru and Burot (1888, contributed to elaborate the concepts of multiple personality and cathartic method. The authors present this clinical case, the cultural context of this mental illness, and the relevant theories. The genetic analysis of Louis Vivet's iatrogenic disorder or transient mental illness (Hacking, 2002 shows how the dominant theories on identity and memory contributed to construct the symptoms observed by Bourru and Burot (1888 and validated the therapeutic methods.

Formerly utilized MED/AEC sites Remedial Action Program. Radiological survey of the St. Louis Airport Storage Site, St. Louis, Missouri. Final report. [U, Ra-bearing wastes stored in 1940-60's

Energy Technology Data Exchange (ETDEWEB)

None

1979-09-01

Results of two radiological surveys of the St. Louis-Lambert Airport property, formerly known as the Airport Storage Site, St. Louis, Missouri, are presented. Uranium- and radium-bearing waste materials were stored from the 1940's to the late 1960's in this area. The surveys included direct measurements of beta-gamma radiation; determination of uranium, actinium, and radium concentrations in soil samples and from bore holes; determination of radionuclide concentrations in groundwater and surface water; measurement of radon flux from the ground surface; and measurements of /sup 222/Rn in air near the site. Results indicate that some offsite drainage pathways are becoming contaminated, probably by runoff from the site; no migration of /sup 222/Rn from the site was observed.

Mounting a Curricular Revolution: An Interview with Henry Louis Gates, Jr.

Science.gov (United States)

von Zastrow, Claus

2009-01-01

This article presents an interview with Henry Louis Gates, Jr., Harvard professor and cultural critic who has captured 25 million viewers with his PBS documentary series, African American Lives (WNET). Using genealogical research and DNA science, Gates traces the family history of 19 famous African Americans. What results is a rich and moving…

GENOTOXICITY OF BIOREMEDIATED SOILS FROM THE REILLY TARSITE, ST. LOUIS PARK, MINNESOTA

Science.gov (United States)

An in vitro approach was used to measure the genotoxicity of creosote-contaminated soil before and after four bioremediation processes. The soil was taken from the Reilly Tar site, a closed Superfund site in Saint Louis Park, Minnesota. The creosote soil was bioremediated in bios...

Louis Aragon: (Re writing the Nazi-Soviet Pact

Directory of Open Access Journals (Sweden)

Angela KIMYONGÜR

2006-10-01

Full Text Available At the time of the Nazi-Soviet non-aggression pact of 1939, Louis Aragon was a member of the French Communist Party (PCF, a well known novelist and poet and a journalist. Whilst his writing career had undergone several notable transformations, not least that from surrealist to socialist realist, his political commitment to the left and, from 1927 to the PCF, remained steadfast for much of his life. Indeed, unlike the PCF’s interpretation of the Second World War, which underwent a number of s...

[The disgrace of Antoine Daquin, first physician of Louis XIV (1693)].

Science.gov (United States)

Peumery, J J

1996-12-01

Antoine Daquin, Principal Physician of Louis XIV and Earl of Jouy-en-Josas, was born in Paris. He was the son of Louis-Henri Daquin, Physician to Queen Marie de Médicis; his paternal grandfather, born in the Jewish religion, became converted to catholicism at Aquino, in Italy, whence his name d'Aquin, then Daquin. A. Daquin studied to be a doctor at Montpellier and graduated on 18 May 1648. He married Marguerite Gayant, Antoine Vallot's niece, Antoine Vallot being the Principal Physician of Louis XIV. This relationship permitted him to get the position of Principal Physician of the Queen, then, after Vallot's death, to succeed him, on 18 April 1672, as Principal Physician of the King. The kindliness of the King's mistress, Mme de Montespan, helped him in that appointment. Daquin was a good doctor, he turned out awkward: "great courtier, but rich, miser, grasping, wanting to establish his family anyway" said the Duc de Saint-Simon. He dared ask the King for the Archbishopric of Tours for his son: "it was the rock on which he broke up" said again Saint-Simon. On 2 November 1693, the comte de Pontchartrain came to his home by order of the King, to tell him, he was ordered to retire from Court without delay. It was forbidden him to come back or to write to the King. Guy-Crescent Fagon was designated "Premier Médecin" instead of him; but Fagon had worked at the undoing of Daquin, with a view to robbing him of his position, with the complicity of the King's new mistress, Mme de Maintenon. After his disgrace, Daquin retired probably to Moulins; he died obscurely in Vichy, on 17 May 1696. Today, Daquin is regarded as a victim of intrigues of Court, which explains his celebrity.

Current status of non-native fish species in the St. Louis River estuary

Science.gov (United States)

The fish community of the St. Louis River estuary is well characterized, thanks to fishery assessment and invasive species early detection monitoring by federal, state, and tribal agencies. This sampling includes long-standing adult/juvenile fish surveys, larval fish surveys beg...

Study of secondhand smoke exposure in St. Louis City and County suggests need for comprehensive smoke-free Missouri law adoption.

Science.gov (United States)

Moreland-Russell, Sarah; Cyr, Julianne; Benson, Peter; Colditz, Graham; Pulley, Deren; Barnoya, Joaquin

2012-01-01

This cross-sectional study provides information about secondhand smoke exposure across the St. Louis metro area and perceptions and attitudes about tobacco and health within the local hospitality industry. Results from this study support the need for passage and implementation of comprehensive smoke-free laws throughout Missouri, particularly in St. Louis City and County where efforts to pass comprehensive smoke-free laws have been unsuccessful.

Influence of Sex and Age on Natural Resistance to St. Louis Encephalitis Virus Infection in Mice

Science.gov (United States)

Andersen, Arthur A.; Hanson, Robert P.

1974-01-01

A difference was observed in susceptibility of adult male and female mice to St. Louis encephalitis (SLE) virus as measured by the death rate after intravenous challenge. Female mice that had susceptibility similar to that of males at 2 months of age had increased resistance to SLE virus at 3 and 4 months of age. The increased resistance occurred after sexual maturity, indicating that the resistance factor possibly was related to an aging process in the female. The susceptibility of male mice remained unchanged over the 2- to 4-month period. Neither pregnancy nor castration had any effect on resistance of adult mice to St. Louis encephalitis virus. PMID:4857422

Evaluation of variable speed limits on I-270/I-255 in St. Louis.

Science.gov (United States)

2010-10-01

In May of 2008, MoDOT installed a Variable Speed Limit (VSL) system along the I270/I255 corridor in St. Louis. This project evaluated the VSL system and its potential impacts and benefits to the transportation users. The technical system ...

Investigating phenology of larval fishes in St. Louis River estuary shallow water habitats

Science.gov (United States)

As part of the development of an early detection monitoring strategy for non-native fishes, larval fish surveys have been conducted since 2012 in the St. Louis River estuary. Survey data demonstrates there is considerable variability in fish abundance and species assemblages acro...

Socioeconomic factors affecting infant sleep-related deaths in St. Louis.

Science.gov (United States)

Hogan, Cathy

2014-01-01

Though the Back to Sleep Campaign that began in 1994 caused an overall decrease in sudden infant death syndrome (SIDS) rates, racial disparity has continued to increase in St. Louis. Though researchers have analyzed and described various sociodemographic characteristics of SIDS and infant deaths by unintentional suffocation in St. Louis, they have not simultaneously controlled for contributory risk factors to racial disparity such as race, poverty, maternal education, and number of children born to each mother (parity). To determine whether there is a relationship between maternal socioeconomic factors and sleep-related infant death. This quantitative case-control study used secondary data collected by the Missouri Department of Health and Senior Services between 2005 and 2009. The sample includes matched birth/death certificates and living birth certificates of infants who were born/died within time frame. Descriptive analysis, Chi-square, and logistic regression. The controls were birth records of infants who lived more than 1 year. Chi-square and logistic regression analyses confirmed that race and poverty have significant relationships with infant sleep-related deaths. The social significance of this study is that the results may lead to population-specific modifications of prevention messages that will reduce infant sleep-related deaths. © 2013 Wiley Periodicals, Inc.

Jean-Louis Brachet (1789-1858). A forgotten contributor to early 19th century neurology.

Science.gov (United States)

Walusinski, O

2015-10-01

Specialists of the history of hysteria know the name of Jean-Louis Brachet (1789-1858), but few realise the influence of this physician and surgeon from Lyon, a city in the southeastern part of France. Not only a clinician, he was also a neurophysiology researcher in the early 19th century. Along with his descriptions of meningoencephalitis, including hydrocephalus and meningoencephalitis, he elucidated the functioning of the vegetative nervous system and described its activity during emotional states. He also helped describe the different forms of epilepsy and sought to understand their aetiologies, working at the same time as the better-known Louis-Florentin Calmeil (1798-1895). We present a biography of this forgotten physician, a prolific writer, keen clinical observer and staunch devotee of a rigorous scientific approach. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Prague, September 1st, 1816: Premiere of Louis Spohr’s Faust 223. A documentary study

Czech Academy of Sciences Publication Activity Database

Freemanová, Michaela

2016-01-01

Roč. 53, 2/3 (2016), s. 223-234 ISSN 0018-7003 Institutional support: RVO:68378076 Keywords : Louis Spohr’s Faust * theatre performance * Prague’s Estates Theatre Subject RIV: AL - Art, Architecture, Cultural Heritage

Histoire d’un non-objet historiographique : le cas Louis xvi

Directory of Open Access Journals (Sweden)

Aurore Chery

2011-03-01

Full Text Available Bien que la Révolution française ait suscité l’intérêt des chercheurs du monde entier, Louis xvi fait figure de parent pauvre des études universitaires. Même si c’est à son corps défendant, il en est tout de même l’un des principaux protagonistes et la Révolution s’est aussi construite en interrogeant le rôle et la place du roi. Cette situation a eu pour conséquence de conserver vivace la légende dorée que le roi s’est construite en exerçant un contrôle sur son image dès le début de son règne. Elle l’assimile à un nouvel Henri iv, profondément concerné par les maux de ses sujets. Malgré les attaques de la Révolution, cette image continue à exercer une influence considérable sur les biographes de Louis xvi et les historiens de la Révolution.Si la Restauration en a fait un usage sans surprise, elle a, de manière plus étonnante, séduit jusqu’à Jaurès avant de souffrir du discrédit dans lequel sombre le royalisme en choisissant l’antisémitisme au xxe siècle. Néanmoins, c’est aujourd’hui par le détour de l’historiographie anglo-saxonne qu’elle fait sa réapparition et commence seulement à être questionnée.Although the French Revolution has aroused interest of international researchers, Louis xvi is widely neglected by the academic studies. Even if reluctantly, he is yet one of the main protagonists and it is also by questioning the role and the place of the king that the Revolution took its shape.This led to the consequence that the golden legend the king constructed by controlling his image from the beginning of his reign is still very lively today. In it, he is presented as a new Henri iv, deeply concerned by the misfortunes of his subjects. In spite of the attacks of the Revolution, this image still considerably influences Louis xvi’s biographers and the historians of the Revolution.If the Restoration made a not surprising good use of it, it more astonishingly seduced Jaur

Appendices : evaluation of variable speed limits on I-270/I-255 in St. Louis.

Science.gov (United States)

2010-10-01

In May of 2008, MoDOT installed a Variable Speed Limit (VSL) system along the I-270/I-255 corridor in : St. Louis. This project evaluated the VSL system and its potential impacts and benefits to the : transportation users. The technical system ...

The parody defense against trademark bullies: analysis of the Louis Vuitton vs. Mob Case

Directory of Open Access Journals (Sweden)

Daniela Molano Lozano

2017-12-01

Full Text Available The present note aims to give a better understanding of parody as an exception to the exclusive rights provided to copyright holders and trademark owners. With this purpose, the note uses the Louis Vuitton vs. MOB case as a reference.

Louis Boutet de Monvel, selected works

CERN Document Server

Sjöstrand, Johannes

2017-01-01

This book features a selection of articles by Louis Boutet de Monvel and presents his contributions to the theory of partial differential equations and analysis. The works selected here reveal his central role in the development of his field, including three cornerstones: firstly, analytic pseudodifferential operators, which have become a fundamental aspect of analytic microlocal analysis, and secondly the Boutet de Monvel calculus for boundary problems for elliptic partial differential operators, which is still an important tool also in index theory. Thirdly, Boutet de Monvel was one of the first people to recognize the importance of the existence of generalized functions, whose singularities are concentrated on a single ray in phase space, which led him to make essential contributions to hypoelliptic operators and to a very successful and influential calculus of Toeplitz operators with applications to spectral and index theory. Other topics treated here include microlocal analysis, star products and deforma...

Centro Federal de Comunidad Saint Louis - EE.UU.

Directory of Open Access Journals (Sweden)

Hellmuth, George

1980-04-01

Full Text Available The Community Federal Center lies in the outskirts of the town of Saint Louis. It was conceived and designed by the project authors — in a style characteristic of them — as a suburban architectonic complex for office use. The work, standing out over an open stretch of land, has an ample base, with a volume that is neither the actual tower of the city centre nor the classic low rural construction. The building's architectonic language permits an integration, by sympathy, in the context of the neighbouring uni-family housing zone, without naturally being assimilated in them, due to the disparity of functions. It is achieved through a fracture of scaled volumes, breaking the classic coldness of the big office building, whilst at the same time thanks to its robustness, it indicates the activity housed inside.

El Community Federal Center está emplazado en las afueras de la ciudad de Saint Louis. Fue concebido y diseñado por los autores del proyecto —en un estilo que les es característico—, como un complejo arquitectónico suburbano destinado a oficinas. La obra, que se eleva sobre un terreno despejado, es amplía de base, presentando un volumen que no es ni la torre propia del centro urbano ni la clásica construcción rural de baja altura. El lenguaje arquitectónico del edificio permite una integración, por simpatía, en el contexto de la zona de viviendas unifamiliares cercana, sin llegar, naturalmente, a asimilarse a ellas dada la disparidad de funciones. Se lleva a cabo por medio de una fractura de volúmenes, escalonados, que rompen la frialdad clásica del gran edificio de oficinas, sin dejar de indicar, por su robustez, la actividad que alberga en su interior.

The North Korean Economy: Background and Policy Analysis

Science.gov (United States)

2005-02-09

and Hong Kong, as well as rapid growth and trade liberalization to China, Thailand, Malaysia and other countries of Asia. The “Stalinist” North Korean...contract processing (assembly, sewing, or other processing done under contract) by North Koreans.62 The companies included Daewoo (jackets, bags), Samsung

Relation between the St. Louis urban precipitation anomaly and synoptic weather factors

International Nuclear Information System (INIS)

Vogel, J.L.; Huff, F.A.

1978-01-01

The summer (June--August) rainfall distribution on the METROMEX network was analyzed to determine the synoptic conditions during which the urban-industrial regions of St. Louis affect the precipitation process. The rainfall patterns were stratified by direction of movement of convective entities in storm systems, surface wind direction, and basic synoptic weather types. The results provide support for enhancement of rainfall downstorm from the urban-industrial region. Although only 23% of the 330 storms moved from the west-southwest, the storms produced 42% of the network rainfall and were strong contributors to the rainfall anomaly that maximizes 25--30 km northeast of St. Louis. Cold front conditions with the major convective entities moving from the southwest, and squall lines with any storm motion were associated with the most intense rainstorms over the raingage network, and these storms were also largely responsible for the rainfall anomaly. The rainfall pattern based on air mass storms did not indicate any The rainfall pattern based on air mass storms did not indicate any significant urban enhancement of rainfall and study of squall zone storms suggested possible reduction of rainfall in the urban region

76 FR 54801 - Healthlink, a Wellpoint, Inc. Company, Accounts Receivable and Collections Division, St. Louis...

Science.gov (United States)

2011-09-02

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-80,213] Healthlink, a Wellpoint, Inc. Company, Accounts Receivable and Collections Division, St. Louis, MO; Notice of Negative... Globalization Adjustment Assistance Act of 2009 (Trade Act of 2009) was satisfied. Specifically, the Department...

Avec Lipse dans la tourmente : Louis du Gardin traducteur de la Diva Virgo Hallensis

NARCIS (Netherlands)

Meerhoff, K.

2017-01-01

The acts and writings of Louis du Gardin (1572-1633), town physician of Douay and professor of medicine at its Catholic University founded in 1560 by King Philip II of Spain, are considered in the context of what is called nowadays the process of “confessionalisation”. Like Saint-Omer, Lille,

Short biography of Louis Daniel Beauperthuy (1807-71): pioneer of microbiology and medical science in Venezuela.

Science.gov (United States)

Godoy, Gerardo A; Tarradath, Ewart

2010-02-01

Louis Daniel Beauperthuy was a pioneer of microbiology in Venezuela where he developed microscopic and clinical research together with academic and scientific observation related to leprosy and the role of insects in the transmission of febrile illnesses.

75 FR 56991 - Grant of Authority for Subzone Status Michelin North America, Inc. (Tire Distribution and Wheel...

Science.gov (United States)

2010-09-17

... Status Michelin North America, Inc. (Tire Distribution and Wheel Assembly) Baltimore, MD Pursuant to its...; Now, therefore, the Board hereby grants authority for subzone status for activity related to tire and tire accessories warehousing and distribution and wheel assembly at the facility of Michelin North...

An evaluation of public school district tobacco policies in St. Louis County, Missouri.

Science.gov (United States)

Barbero, Colleen; Moreland-Russell, Sarah; Bach, Laura E; Cyr, Julianne

2013-08-01

One way to address tobacco use by youth is for primary and secondary schools to adopt and implement comprehensive tobacco policies. The purpose of this study was to evaluate the comprehensiveness of tobacco policies in St. Louis County, Missouri public school districts. We evaluated the strength of tobacco policies from all 23 public school districts located in the county using the Center for Tobacco Policy Research's School Tobacco Policy Index, a standardized tool for rating school tobacco policies. The districts averaged a score of 24.4 of 40 possible points on the Index. Policies scored highest on the Tobacco-Free Environment domain and lowest on the Enforcement domain. Policies averaged about half of the total possible points for the Prevention and Treatment Services and Policy Organization domains. Despite more than a decade of efforts by the Centers for Disease Control and Prevention to improve school tobacco policies, this study shows that policies in St. Louis County districts have yet to meet the standard of comprehensiveness. It is recommended that schools adopt policies that are comprehensive and that address all domains of the School Tobacco Policy Index. © 2013, American School Health Association.

On the formula of Jacques-Louis Lions for reproducing kernels of harmonic and other functions

Czech Academy of Sciences Publication Activity Database

Engliš, Miroslav; Lukkassen, D.; Peetre, J.; Persson, L. E.

2004-01-01

Roč. 570, - (2004), s. 89-129 ISSN 0075-4102 R&D Projects: GA AV ČR IAA1019005 Institutional research plan: CEZ:AV0Z1019905 Keywords : formula of Jacques-Louis Lions * Sobolev space * Hilber space Subject RIV: BA - General Mathematics Impact factor: 0.885, year: 2004

Louis de Broglie a solitary physicist and the everyday life

International Nuclear Information System (INIS)

Lochak, G.

1988-01-01

This article, written in memory of the late Louis de Broglie, begins with the short portrayal of a man of many secrets whose precise knowledge of a number of technical subjects was paralleled by a vast learning which ranged from scientific to literary and historical fields. Most of his life however was devoted to a single problem, namely the coexistence of waves and particles. The greater part of the article then deals with the practical applications of wave mechanics and more generally with different phenomena of technical processes which demonstrate under various guises the wave properties of matter [fr

François Louis (1928-2010)

CERN Multimedia

CERN Bulletin

2010-01-01

François Louis, who was a CERN mathematician from 1957 to 1988, passed away on 23 March 2010.   Everyone who was at CERN in the early years will remember the important role he played before the advent of computers, as well as his skills as a teacher when it became imperative for us all to make use of them. His lessons, at all levels, were remarkable for their precision and clarity. François loved to share his gifts of intelligence and culture with his friends and colleagues. Never turning down a request for help, he imparted his wisdom to the many who sought it with unfailing modesty and wit. We recall with affection his wonderful conversation, where mathematics merged with literature, cinema and his other great passion, music. Indeed he will also be remembered as a gifted pianist. His critical spirit and impeccable manners, born of a bygone era, left an indelible mark on us all. We are deeply saddened by his death. His friends      

Preliminary evaluation of ground-water contamination by coal-tar derivatives, St. Louis Park area, Minnesota

Science.gov (United States)

Hult, Marc F.; Schoenberg, Michael E.

1984-01-01

Operation of a coal-tar distillation and wood-preserving plant from 1918 to 1972 in St. Louis Park, a suburb of Minneapolis, Minn., resulted in ground-water contamination. This preliminary evaluation presents an overview of the problem based on the results of the first year (1979) of an ongoing study.

Assessment of the St. Louis River AOC fish tumors and other deformities beneficial use impairment

Science.gov (United States)

The Fish Tumors and Other Deformities Beneficial Use Impairment (BUI) was listed as one of nine BUIs at the time the St. Louis River AOC was designated in 1987. At the time, no formal studies had been conducted to estimate the prevalence of either fish tumors or deformities. To a...

Computers and School Nurses in a Financially Stressed School System: The Case of St. Louis

Science.gov (United States)

Cummings, Scott

2013-01-01

This article describes the incorporation of computer technology into the professional lives of school nurses. St. Louis, Missouri, a major urban school system, is the site of the study. The research describes several major impacts computer technology has on the professional responsibilities of school nurses. Computer technology not only affects…

Single- and Multi-Prime Contracting in North Carolina Public Construction.

Science.gov (United States)

Bluestein, Frayda S.

1995-01-01

The North Carolina General Assembly directed the State Building Commission to study the comparative costs of multi- and single-prime contracting and report the results to the 1995 General Assembly. Describes the analysis of data collected from governmental units that had awarded construction contracts. Identifies some alternative contracting…

Louis Vuitton: El alma del viaje. El viaje como concepto idealista de una marca a través de la publicidad

OpenAIRE

González Revuelta, Paula

2014-01-01

La publicidad del sector de la moda y concretamente de Louis Vuitton presenta en la actualidad un nivel de sofisticación y notoriedad elevado porque introduce un lenguaje onírico, simbólico y emocional en sus relatos. La investigación sitúa y da significado a la simbología del concepto del viaje presente en las campañas publicitarias y en la esencia de la marca Louis Vuitton, y su constante evocación al pasado. Tomando como objeto de análisis las campañas gráficas realizadas desde los inicios...

Diagnosis of Fatal Human Case of St. Louis Encephalitis Virus Infection by Metagenomic Sequencing, California, 2016.

Science.gov (United States)

Chiu, Charles Y; Coffey, Lark L; Murkey, Jamie; Symmes, Kelly; Sample, Hannah A; Wilson, Michael R; Naccache, Samia N; Arevalo, Shaun; Somasekar, Sneha; Federman, Scot; Stryke, Doug; Vespa, Paul; Schiller, Gary; Messenger, Sharon; Humphries, Romney; Miller, Steve; Klausner, Jeffrey D

2017-10-01

We used unbiased metagenomic next-generation sequencing to diagnose a fatal case of meningoencephalitis caused by St. Louis encephalitis virus in a patient from California in September 2016. This case is associated with the recent 2015-2016 reemergence of this virus in the southwestern United States.

Assessing the Bicycle Network in St. Louis: A PlaceBased User-Centered Approach

Directory of Open Access Journals (Sweden)

Bram Boettge

2017-02-01

Full Text Available To transition towards sustainability and increase low-impact transportation, city planners are integrating bicycle infrastructure in urban landscapes. Yet, this infrastructure only promotes cycling according to how well it is sited within a specific city. How to best site bicycle facilities is essential for sustainability planning. We review approaches to assessing and siting new bicycle facilities. Following sustainability science, we argue that active cyclists should be consulted to incorporate users’ site-specific knowledge into bicycle infrastructure assessments. We then pilot an approach that surveys cyclists concerning level of stress along routes ridden in St. Louis, MO, USA. Among the active cyclists surveyed (n = 89, we found stress correlates with speed limit, roadway classification, and number of lanes. Although cyclists surveyed in St. Louis prefer roads with bike lanes over roads with sharrows or no infrastructure, the presence of bicycle infrastructure had no correlation with reported levels of stress. The piloted survey and spatial analytic tool are transferable to other localities. For planners, the maps generated by this participant data approach identify high-stress routes as targets of new infrastructure or information to direct cyclists to safer routes. For bicyclists, the maps generated identify low-stress routes for recreation and commuting.

Secretaris der natuur : de Franse conservatieve denker Louis de Bonald en zijn Theorie van de Macht

NARCIS (Netherlands)

Audenaerde, Rolandus Franciscus Cornelis

2009-01-01

A reconstruction of the Théorie du Pouvoir, the first and major work of the French philosopher Louis de Bonald, shows that this work is best being read along the lines of political classicism: its syllogistic structure consists of a philosophical (deductive) maior, a historical (empirical) minor,

[Louis Braille (1809-1852)--inventor of raised dots system].

Science.gov (United States)

Maciejewicz, Piotr; Kopacz, Dorota

2005-01-01

Louis Braille was born on January 4th 1809 in Coupvray, France. An injury to his eye at the age of three, resulted in total loss of vision. In 1819 he entered the Institute for Blind Youth in Paris. There he would live, study, and later teach. When he was fifteen, he developed system of reading and writing by means of raised dots, which is known today as Braille. The basis of the Braille system is known as a Braille cell. The cell is comprised of six dots numbered in a specific order. Each dot or combination of dots represents a letter of the alphabet. This Braille system has established itself internationally and formed the basic Braille for all languages.

Louis J. Battan 1923”1986

Science.gov (United States)

Atlas, David

Dr. Louis J. Battan died on October 29, 1986, after a short illness. Although he had been a professor of atmospheric sciences at the University of Arizon a since 1958 and director of the Institute of Atmospheric Physics there from 1973 to 1982 (and associate director from 1958 to 1973), his activities on the national and international scenes were so varied that he was known in different ways by the numerous communities with which he was involved. However, all who knew him shared his uncommonly good humor, took pride in his friendship, and respected his wisdom and good judgment. Lou is survived by his wife Jeanette, daughter Suzette, and son Paul.Battan was born in New York City on February 9, 1923. He was the second of four sons born to Annibale and Luisa Battan, immigrants to the United States from the village of Vigo in the Tyrolean Alps of Austria. He grew up in Brooklyn, N.Y., in a family environment that encouraged the highest moral standards and a devotion to hard work and self-reliance, qualities that remained with him throughout his life.

Forensic microanalysis of Manhattan Project legacy radioactive wastes in St. Louis, MO.

Science.gov (United States)

Kaltofen, Marco; Alvarez, Robert; Hixson, Lucas W

2018-06-01

Radioactive particulate matter (RPM) in St Louis, MO, area surface soils, house dusts and sediments was examined by scanning electron microscopy with energy dispersive X-ray analysis. Analyses found RPM containing 238 U and decay products (up to 46 wt%), and a distinct second form of RPM containing 230 Th and decay products (up to 15.6 wt%). The SEM-EDS analyses found similar RPM in Manhattan Project-era radioactive wastes and indoor dusts in surrounding homes. Copyright © 2018 Elsevier Ltd. All rights reserved.

77 FR 68073 - Prevailing Rate Systems; Redefinition of the St. Louis, MO; Southern Missouri; Cleveland, OH; and...

Science.gov (United States)

2012-11-15

... 3206-AM70 Prevailing Rate Systems; Redefinition of the St. Louis, MO; Southern Missouri; Cleveland, OH... Cleveland wage area. These changes are based on recent consensus recommendations of the Federal Prevailing... proposing the changes described below. The Federal Prevailing Rate Advisory Committee (FPRAC), the national...

Louis Blajan, DVM, 1924-2010: The dynamic veterinarian who brought the World Organisation for Animal Health (Office International des Épizooties: OIE into the modern age

Directory of Open Access Journals (Sweden)

Anon.

2010-03-01

Full Text Available Chevalier de la Légion d’honneurCroix du Combattant volontaire 1939-1945Officier du Mérite agricoleOfficier de l'Ordre national de la Côte d'Ivoire Louis Blajan was born in Lahage (Haute-Garonne, France on 10 April 1924 and passed away in Mont-de-Marsan on 10 February 2010. After studying at the Pierre de Fermat Lycée in Toulouse, Louis graduated from the Toulouse Veterinary School in 1948. He received the Institut d’élevage et de médecine vétérinaire des pays tropicaux (IEMVT diploma in 1949 and was posted in the French Overseas Territory of Mali from 1949 to 1952. Upon his return to France, Louis was appointed to the position of State Veterinarian in the Ministry of Agriculture from 1953 to 1968; there he was responsible for foot and mouth disease, swine fever and Newcastle disease. He also headed the consultative committee on infectious diseases. Subsequently, he was appointed Veterinary Inspector-in-Chief and Head of Border Controls Policy.Louis married Janine in 1952. She was extremely supportive of him throughout his career. She died in an accident a month before Louis retired in 1990.He was the technical director of Cofranimex (Compagnie française pour l’importation et l’exportation des animaux reproducteurs et leur semence from 1968 to 1977 and Director of the Association pour le développement des techniques de l’élevage français (ADETEF from 1977 to 1978.Louis moved to the Office International des Épizooties (now known as the World Organisation for Animal Health or ‘OIE’ where he was Head of the Technical Department from 1978 to 1980. Two years later, he was elected to the most prestigious of positions for a veterinarian, Director General, in 1980. He was re-elected in 1985 and retired in 1990.Louis succeeded in modernising the rather old-fashioned OIE and transformed it into a modern and efficient international organisation. He was instrumental in developing the International zoo-sanitary code (now the

Reflections on the Action Assembly ANADP

OpenAIRE

Farquhar, Adam

2014-01-01

Aligning National Approaches to Digital Preservation: An Action Assembly Biblioteca de Catalunya (National Library of Catalonia) November 18-20, 2013, Barcelona, Spain Auburn University Council on Library and Information Resources (CLIR) Digital Curation Centre (DCC) Digital Preservation Network (DPN) Joint Information Systems Committee (JISC) University of North Texas Virginia Tech Interuniversity Consortium for Political and Social Research (ICPSR) Innovative Inte...

St. Louis demonstration final report: refuse processing plant equipment, facilities, and environmental evaluations

Energy Technology Data Exchange (ETDEWEB)

Fiscus, D.E.; Gorman, P.G.; Schrag, M.P.; Shannon, L.J.

1977-09-01

The results are presented of processing plant evaluations of the St. Louis-Union Electric Refuse Fuel Project, including equipment and facilities as well as assessment of environmental emissions at both the processing and the power plants. Data on plant material flows and operating parameters, plant operating costs, characteristics of plant material flows, and emissions from various processing operations were obtained during a testing program encompassing 53 calendar weeks. Refuse derived fuel (RDF) is the major product (80.6% by weight) of the refuse processing plant, the other being ferrous metal scrap, a marketable by-product. Average operating costs for the entire evaluation period were $8.26/Mg ($7.49/ton). The average overall processing rate for the period was 168 Mg/8-h day (185.5 tons/8-h day) at 31.0 Mg/h (34.2 tons/h). Future plants using an air classification system of the type used at the St. Louis demonstration plant will need an emissions control device for particulates from the large de-entrainment cyclone. Also in the air exhaust from the cyclone were total counts of bacteria and viruses several times higher than those of suburban ambient air. No water effluent or noise exposure problems were encountered, although landfill leachate mixed with ground water could result in contamination, given low dilution rates.

Urban growth and cultural identity; fractures and imbalances in heritage values: A case study of the island of Saint-Louis, Senegal

Directory of Open Access Journals (Sweden)

Lucía Martínez-Quintana

2016-05-01

Full Text Available The island of Saint-Louis of Senegal was awarded the status of world heritage site by UNESCO in 2000 as an “outstanding example” of urban heritage. This island city comes with a unique heritage: development planning that combines a strong historical French influence with a gridiron urban morphology and building typology. The island must be interpreted within its total territorial context that includes both the island of Sor (on the mainland and La Langue de la Barberie, a sandy barrier that separates the mouth of the river from the sea. The city of Saint-Louis itself has grown enormously and haphazardly from the latter part of the 20th century: it is now the fourth most populous city in Senegal. At present, the city is undergoing a serious period of decline and recession due, in part, to the overriding influence of the capital, Dakar, and the centralized political forces in the country. This article looks at the key morphological and functional reasons behind the development and evolution of the island of Saint-Louis and that persist in the present context, with justifications for the deep-rooted heritage values that maintain its prestige as a World Heritage Site.

[About two unpublished autographs of Louis Pasteur belonging to the Academie national de pharmacie].

Science.gov (United States)

Storck, J

1997-01-01

Two unpublished autographs of Louis Pasteur, dated respectively november 26th 1853 and december 22nd 1853 in Strasbourg, were found in unclassified archives of the Academie nationale de pharmacie - Paris. They are described in the paper. They are related to the prize of F 1500 given to him by the Societe de pharmacie, the previous name of the Academy. This award concerned his famous studies on the racemic or paratartric acid.

78 FR 27864 - Cold Treatment for Fresh Fruits and Vegetables; MidAmerica St. Louis Airport, Mascoutah, IL

Science.gov (United States)

2013-05-13

... Service 7 CFR Part 305 [Docket No. APHIS-2012-0089] Cold Treatment for Fresh Fruits and Vegetables; Mid... fruits and vegetables upon arrival at the MidAmerica St. Louis Airport, Mascoutah, IL. We have determined... escape from shipments of fruits or vegetables before the fruits or vegetables undergo cold treatment...

Streamflow distribution maps for the Cannon River drainage basin, southeast Minnesota, and the St. Louis River drainage basin, northeast Minnesota

Science.gov (United States)

Smith, Erik A.; Sanocki, Chris A.; Lorenz, David L.; Jacobsen, Katrin E.

2017-12-27

Streamflow distribution maps for the Cannon River and St. Louis River drainage basins were developed by the U.S. Geological Survey, in cooperation with the Legislative-Citizen Commission on Minnesota Resources, to illustrate relative and cumulative streamflow distributions. The Cannon River was selected to provide baseline data to assess the effects of potential surficial sand mining, and the St. Louis River was selected to determine the effects of ongoing Mesabi Iron Range mining. Each drainage basin (Cannon, St. Louis) was subdivided into nested drainage basins: the Cannon River was subdivided into 152 nested drainage basins, and the St. Louis River was subdivided into 353 nested drainage basins. For each smaller drainage basin, the estimated volumes of groundwater discharge (as base flow) and surface runoff flowing into all surface-water features were displayed under the following conditions: (1) extreme low-flow conditions, comparable to an exceedance-probability quantile of 0.95; (2) low-flow conditions, comparable to an exceedance-probability quantile of 0.90; (3) a median condition, comparable to an exceedance-probability quantile of 0.50; and (4) a high-flow condition, comparable to an exceedance-probability quantile of 0.02.Streamflow distribution maps were developed using flow-duration curve exceedance-probability quantiles in conjunction with Soil-Water-Balance model outputs; both the flow-duration curve and Soil-Water-Balance models were built upon previously published U.S. Geological Survey reports. The selected streamflow distribution maps provide a proactive water management tool for State cooperators by illustrating flow rates during a range of hydraulic conditions. Furthermore, after the nested drainage basins are highlighted in terms of surface-water flows, the streamflows can be evaluated in the context of meeting specific ecological flows under different flow regimes and potentially assist with decisions regarding groundwater and surface

Los juegos antropologicos de Saint-Louis

Directory of Open Access Journals (Sweden)

Fabrice Delsahut

2011-12-01

Full Text Available En 1904, en medio de la feria de la exposición universal de Saint-Louis, los Juegos olimpicos no pudieron escapar a la ascención de ideologías racistas del principios del siglo XX y contibuyeron a la discusión del mérito atlético de diferentes razas. Los organisadores prepararon competiciones especiales que llamaron en esta ocasión «Jornadas antropológicas» reservadas a los que la América segregacionista del momento consideraba como primitivos. El impacto de los estudios sobre las razas, sobre la manera de pensar en el deporte no fue, al contrario de lo que se esforzaron hacer creer los diferentes presidentes del C.O.I en el curso de las siguientes decadas, un simple avatar del movimiento olimpico. Veremos la influencía de este espectáculo atletico interracial en los Estados Unidos pero tambien en el mundo, particularmente a través del papel de la prensa. Las jornadas antropológicas permitieron indudablemente elaborar una cierta percepción de la otricidad y limitaran la integración de los pueblos autóctonas en la maquina deportiva mundial.

Introduction to Louis Michel's lattice geometry through group action

CERN Document Server

Zhilinskii, Boris

2015-01-01

Group action analysis developed and applied mainly by Louis Michel to the study of N-dimensional periodic lattices is the central subject of the book. Different basic mathematical tools currently used for the description of lattice geometry are introduced and illustrated through applications to crystal structures in two- and three-dimensional space, to abstract multi-dimensional lattices and to lattices associated with integrable dynamical systems. Starting from general Delone sets the authors turn to different symmetry and topological classifications including explicit construction of orbifolds for two- and three-dimensional point and space groups. Voronoï and Delone cells together with positive quadratic forms and lattice description by root systems are introduced to demonstrate alternative approaches to lattice geometry study. Zonotopes and zonohedral families of 2-, 3-, 4-, 5-dimensional lattices are explicitly visualized using graph theory approach. Along with crystallographic applications, qualitative ...

Negotiating Primitivist Modernisms: Louis Armstrong, Robert Goffin, and the Transatlantic Jazz Debate

Directory of Open Access Journals (Sweden)

Daniel Stein

2011-10-01

Full Text Available “Dear Pal Goffin,” Louis Armstrong wrote to his Belgian acquaintance, the lawyer, hobby journalist, and jazz historian Robert Goffin, on July 19, 1944. “‘Man—I’ve been trying to get in touch with you […]. Here’s another hundred dollars toward the five hundred. […] So accept this hundred and I’ll send the other before a ‘Black Cat can ‘Lick his ‘Bu‘hind’ ….. haw haw haw…” (80. Sending Goffin a batch of money along with this playfully worded missive, Armstrong was hoping for quick results. He ...

Target Population Involvement in Urban Ciclovias: A Preliminary Evaluation of St. Louis Open Streets

OpenAIRE

Hipp, J. Aaron; Eyler, Amy A.; Kuhlberg, Jill A.

2012-01-01

Ciclovias are active street events when roads are open to walkers, cyclists, and families and closed to automobiles. Over 70 cities in the USA have implemented ciclovias to promote physical activity. The authors evaluated four events during 2010 to determine what activities participants perform and who is attending. For two ciclovia events in St. Louis, Missouri, observation reports of activities, gender, and age of 1,452 participants were collected, and 82 adults were interviewed via direct ...

Louis Massignon l'amour mystique ou l'extase dans l'abandon

OpenAIRE

Jacques Keryell

2008-01-01

Parler de Massignon et de son Amour de Dieu n'est pas chose aisée. En effet, si les mystiques musulmans des premiers siècles de l'hégire ont été les hérauts de cet Amour : Al-Hallâj, Râbia al-Adawiyya, Al-Niffâri, Ibn Arabi, Ansâri, Al-Ghazâli, l'Amour de Dieu comme tel, n'est pas au cœur du "ilm al kalâm", de la théologie musulmane traditionnelle. Pour Massignon, langue et spiritualité étaient intimement liées. Si je devais me placer dans une perspective musulmane, je dirais que Louis Massig...

Louis Aragon y el quotidien merveilleux surrealista

Directory of Open Access Journals (Sweden)

Camilo Hoyos Gómez

2013-01-01

Full Text Available El artículo propone un análisis de la mirada y de la imaginación en el paseo urbano por el parisino Pasaje de la Ópera narrado en El campesino de París , de Louis Aragon. En este texto se propone un conocimiento sensible del mundo que parte de la experiencia de lo concreto. De esta manera, el conocimiento de lo concreto y un nuevo acercamiento sobre el mundo circundante le permiten a Aragon desarrollar la teoría del quotidien merveilleux , que consiste en la posibilidad de contemplar imágenes provenientes de la imaginación e impulsadas por el contacto con lo real. A partir de la importancia de la mirada en la ciudad, Aragon establece una nueva epistemología de la mirada, puesto que determina la “lluvia de imágenes” que provienen de un espacio interior de quien camina la ciudad. Este texto, uno de los primeros y fundamentales libros del surrealismo, es una apología de la ciudad y del conocimiento sensorial del mundo y parte de la experienc ia en la ciudad como lugar mágico y cotidiano.

El legado de Louis Pasteur The legacy of Lous Pasteur

Directory of Open Access Journals (Sweden)

Carlos Aguirre Muñoz

1996-01-01

Full Text Available

En este artículo se destacan cualidades de Louis Pasteur como la precocidad de su aptitud artística, la capacidad de concentración y reflexión y la perseverancia en sus empeños para lograr lo deseado; luego se hace una síntesis de su vida a través de sus logros científicos: sentar las bases de la estereoquímica, demostrar que las fermentaciones se deben a la acción de organismos vivos, probar que no existe la generación espontánea, aclarar la etiología de varias enfermedades humanas y animales y proponer soluciones para ellas, incluyendo la producción de vacunas, que culminó con el éxito de la vacunación antirrábica. Pasteur había nacido en una época en que predominaba la insalubridad y se corría grave riesgo de fallecer de enfermedades infectocontagiosas; a su muerte había contribuido inmensamente a mejorar esa situación.

Several qualities of Louis Pasteur are emphasized in this paper, namely: his artistic gift, his capacity for concentration and reflection and his perseverance in working to achieve his goals; a sinthesis of his life is presented through his scientific achievements: to establish the bases of stereochemistry, to prove that fermentations are due to the action of living organisms and that no spontaneous generation exists, to elucidate the etiology of several human and animal diseases and to propose solutions for them including the production of vaccines that culminated with the success of rabies vaccination. Pasteur had been born at a time of great unhealthiness and high risk of death due to infectious diseases; through his life-Iong research he considerably improved such situation.

Reducing Nutrients and Nutrient Impacts Priority Issue Team - St. Louis Bay Project: Implementing Nutrients PIT Action Step 1.1

Science.gov (United States)

Mason, Ted

2011-01-01

The NASA Applied Science & Technology Project Office at Stennis Space Center(SSC) used satellites, in-situ measurements and computational modeling to study relationships between water quality in St. Louis Bay, Mississippi and the watershed characteristics of the Jourdan and Wolf rivers from 2000-2010.

An Analysis of Seacions Ozonesonde Measurements from St. Louis MO: Providing Insight into How Cross Country Wildfires and Descending Stratospheric Air over the Great Plains Impact Regional Air Quality

Science.gov (United States)

Wilkins, J. L.; Morris, G.; de Foy, B.; Fishman, J.

2014-12-01

As part of the SouthEast American Consortium for Intensive Ozone Network Study (SEACIONS) mission, 32 ozonesondes were launched from Forest Park in mid-town St. Louis between 8 Aug and 23 Sept 2013. These launches were supported by concurrent co-located continuous ground level ozone measurements at Saint Louis University's St. Louis Ozone Garden. During the operation of this site, wildfires from both Idaho's Beaver Creek (~115K acres) and California's RIM fire (~258k acres) generated copious amounts of pollution. In addition, widespread agricultural fires in the Midwest were also taking place. To interpret our observations over St. Louis, we used multiple satellite-derived products and retrievals in conjunction with trajectory calculations from the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. We examined a blocking high pressure event [Aug 26-30] which led to ozonesonde profile changes resulting from Stratospheric-Troposphere Exchange (STE) in addition to the smoke from the fires. This case study involved two mixed layer O3 enhancements, which could be spotted at multiple sites within the SEACIONS ozonesonde network. Our findings illustrate how satellite measurements can be used to assess the contribution of the transport of pollution from various sources to local air quality.

Mississippi River streamflow measurement techniques at St. Louis, Missouri

Science.gov (United States)

Wastson, Chester C.; Holmes, Robert R.; Biedenham, David S.

2013-01-01

Streamflow measurement techniques of the Mississippi River at St. Louis have changed through time (1866–present). In addition to different methods used for discrete streamflow measurements, the density and range of discrete measurements used to define the rating curve (stage versus streamflow) have also changed. Several authors have utilized published water surface elevation (stage) and streamflow data to assess changes in the rating curve, which may be attributed to be caused by flood control and/or navigation structures. The purpose of this paper is to provide a thorough review of the available flow measurement data and techniques and to assess how a strict awareness of the limitations of the data may affect previous analyses. It is concluded that the pre-1930s discrete streamflow measurement data are not of sufficient accuracy to be compared with modern streamflow values in establishing long-term trends of river behavior.

The influences of wildfires and stratospheric-tropospheric exchange on ozone during seacions mission over St. Louis

Science.gov (United States)

Wilkins, Joseph L.

The influence of wildfire biomass burning and stratospheric air mass transport on tropospheric ozone (O3) concentrations in St. Louis during the SEAC4RS and SEACIONS-2013 measurement campaigns has been investigated. The Lagrangian particle dispersion model FLEXPART-WRF analysis reveals that 55% of ozonesonde profiles during SEACIONS were effected by biomass burning. Comparing ozonesonde profiles with numerical simulations show that as biomass burning plumes age there is O3 production aloft. A new plume injection height technique was developed based on the Naval Research Laboratory's (NRL) detection algorithm for pyro-convection. The NRL method identified 29 pyro-cumulonimbus events that occurred during the summer of 2013, of which 13 (44%) impacted the SEACIONS study area, and 4 (14%) impacted the St. Louis area. In this study, we investigate wildfire plume injection heights using model simulations and the FLAMBE emissions inventory using 2 different algorithms. In the first case, wildfire emissions are injected at the surface and allowed to mix within the boundary layer simulated by the meteorological model. In the second case, the injection height of wildfire emissions is determined by a guided deep-convective pyroCb run using the NRL detection algorithm. Results show that simulations using surface emissions were able to represent the transport of carbon monoxide plumes from wildfires when the plumes remained below 5 km or occurred during large convective systems, but that the surface effects were over predicted. The pyroCb cases simulated the long-range transport of elevated plumes above 5 km 68% of the time. In addition analysis of potential vorticity suggests that stratospheric intrusions or tropopause folds affected 13 days (48%) when there were sonde launches and 27 days (44%) during the entire study period. The largest impact occurred on September 12, 2013 when ozone-rich air impacted the nocturnal boundary layer. By analyzing ozonesonde profiles with

Linking biotic homogenization to habitat type, invasiveness and growth form of naturalized alien plants in North America

Science.gov (United States)

Hong Qian; Qinfeng. Guo

2010-01-01

Aim Biotic homogenization is a growing phenomenon and has recently attracted much attention. Here, we analyse a large dataset of native and alien plants in North America to examine whether biotic homogenization is related to several ecological and biological attributes. Location North America (north of Mexico). Methods We assembled...

Louis I. Kahn ja Aldo van Eyck : paralleelid moodsa arhitektuuri teises traditsioonis / Robert McCarter ; tõlk. Tiina Randus

Index Scriptorium Estoniae

McCarter, Robert

2007-01-01

Vaadeldakse Louis I. Kahni ja Aldo van Eycki esinemist 1959. a. CIAMi (Congres Internatinaux d'Architecture Moderne) XI kongressil Otterlos, ajaloolistes paikades saadud kogemuste mõju nende loomingule, suhteid kaasaja kunstnikega ja kunstnike loomingu mõju neile, hoonete kavandamist, linnaarhitektuuri ja -planeerimist. Bibliograafia lk.101-102

Assessment of ground-water contamination by coal-tar derivatives, St. Louis Park area, Minnesota

Science.gov (United States)

Hult, M.F.

1984-01-01

Operation of a coal-tar distillation and wood-preserving facility in St. Louis Park, Minnesota, during 1918-72 contaminated ground water with coal-tar derivatives and inorganic chemicals. Coal-tar derivatives entered the groundwater system through three major paths: (1) Spills and drippings that percolated to the water table, (2) surface runoff and plant process water that was discharged to wetlands south of the former plant site, and (3) movement of coal tar directly into bedrock aquifers through a multiaquifer well on the site.

André-Louis Cholesky mathematician, topographer and army officer

CERN Document Server

Brezinski, Claude

2014-01-01

Outside the professional circles of topography and applied mathematics, the life and work of André-Louis Cholesky (1875–1918) are still relatively unknown to the scientific community. This new book appreciably widens the exposure of his remarkable personal achievements in topography and mathematics to a much larger international audience.   Cholesky is also interesting to historians because he is a perfect representative of the "scientists engineers" that, since the early 19th century, had issued from the French scientific high schools. Because they had received a high level of mathematical education, they were able to innovate in their practice of engineering. In the case of Cholesky, this resulted in original contributions in artillery, topography, numerical analysis and graphical calculation. In addition, the book places his education and works within the history of several European countries through the 17th to 19th centuries.   The book begins with Cholesky's biography, followed by his family’s hi...

Symmetries in nature the scientific heritage of Louis Michel

CERN Document Server

Todorov, Ivan; Zhilinskii, Boris

2014-01-01

Reflecting the oeuvre of “a man of two cultures: the culture of pure mathematics and the culture of theoretical physics” (in the words of his long time friend and co-author, Kameshwar Wali), this volume is centred around the notion of symmetry and its breaking. Starting with particle physics, the content proceeds to symmetries of matter, defects, and crystals. The mathematics of group extensions, non-linear group action, critical orbits and phase transitions is developed along the way. The symmetry principles and general mathematical tools provide unity in the treatment of different topics. The papers and lecture notes are preceded by a lively biography of Louis Michel and a commentary that relates his selected works both to the physics of his time and to contemporary trends. This book should be of interest to theoretical physicists, chemists, applied mathematicians and historians of science, and is accessible to graduate (and advanced undergraduate) students.

[Prevalence survey of cardiovascular risk factors in the general population in St. Louis (Senegal)].

Science.gov (United States)

Pessinaba, S; Mbaye, A; Yabéta, G A D; Harouna, H; Sib, A E; Kane, A D; Bodian, M; Ndiaye, M B; Mbaye-Ndour, M; Niang, K; Diagne-Sow, D; Diack, B; Kane, M; Diao, M; Mathieu, J-B S; Kane, A

2013-08-01

Cardiovascular diseases are becoming with their risk factors a real health problem in Africa. The objectives of this study were to assess the prevalence of risk factors for cardiovascular diseases in the general population in Saint-Louis, Senegal. This is a cross-sectional, descriptive and analytical made in May 2010, in the Senegalese aged 15, residing in the city of Saint-Louis, Senegal. A systematic random sampling and stratified cluster has been achieved. Cardiovascular risk factors for research were: hypertension, diabetes, dyslipidemia, smoking, obesity, physical inactivity and metabolic syndrome. The survey involved 1424 individuals with 983 women (69%). The average age was 43.4±17.8years. The prevalence of risk factors was: hypertension (46%), diabetes (10.4%), total cholesterol (36.3%), hyperLDLcholesterol (20.6%), obesity (body mass index≥30kg/m(2)) (23%), abdominal obesity (48.7% according to International Diabetes Federation and 33.2% according to National Cholesterol Education Program) physical inactivity (64.7%), smoking (5.8%) and metabolic syndrome (15.7%). There was predominance in women of risk factors except for smoking and diabetes. The overall cardiovascular risk was high in 24.9% according to the Framingham model, 28.8% (European Society of Hypertension) and 6.1% (SCORE). This survey found a high prevalence of cardiovascular risk factors in a general population in Senegal, predominant in women. This should lead to better develop a strategy to prevent cardiovascular diseases. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

St. Louis area earthquake hazards mapping project; seismic and liquefaction hazard maps

Science.gov (United States)

Cramer, Chris H.; Bauer, Robert A.; Chung, Jae-won; Rogers, David; Pierce, Larry; Voigt, Vicki; Mitchell, Brad; Gaunt, David; Williams, Robert; Hoffman, David; Hempen, Gregory L.; Steckel, Phyllis; Boyd, Oliver; Watkins, Connor M.; Tucker, Kathleen; McCallister, Natasha

2016-01-01

We present probabilistic and deterministic seismic and liquefaction hazard maps for the densely populated St. Louis metropolitan area that account for the expected effects of surficial geology on earthquake ground shaking. Hazard calculations were based on a map grid of 0.005°, or about every 500 m, and are thus higher in resolution than any earlier studies. To estimate ground motions at the surface of the model (e.g., site amplification), we used a new detailed near‐surface shear‐wave velocity model in a 1D equivalent‐linear response analysis. When compared with the 2014 U.S. Geological Survey (USGS) National Seismic Hazard Model, which uses a uniform firm‐rock‐site condition, the new probabilistic seismic‐hazard estimates document much more variability. Hazard levels for upland sites (consisting of bedrock and weathered bedrock overlain by loess‐covered till and drift deposits), show up to twice the ground‐motion values for peak ground acceleration (PGA), and similar ground‐motion values for 1.0 s spectral acceleration (SA). Probabilistic ground‐motion levels for lowland alluvial floodplain sites (generally the 20–40‐m‐thick modern Mississippi and Missouri River floodplain deposits overlying bedrock) exhibit up to twice the ground‐motion levels for PGA, and up to three times the ground‐motion levels for 1.0 s SA. Liquefaction probability curves were developed from available standard penetration test data assuming typical lowland and upland water table levels. A simplified liquefaction hazard map was created from the 5%‐in‐50‐year probabilistic ground‐shaking model. The liquefaction hazard ranges from low (60% of area expected to liquefy) in the lowlands. Because many transportation routes, power and gas transmission lines, and population centers exist in or on the highly susceptible lowland alluvium, these areas in the St. Louis region are at significant potential risk from seismically induced liquefaction and associated

“State of the Estuary” - Developing a long term monitoring, assessment and reporting framework for the lower Saint Louis River

Science.gov (United States)

As the lower Saint Louis River moves closer and closer to delisting as an Area of Concern, it is incumbent that we measure, assess and report on our success. Going forward, It’s equally important that we continue monitoring to protect and sustain the healthy ecosystems we&...

What we do | Page 151 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Analysis of the Structure of Labour Supply and Demand in Four Target Sectors in Saint-Louis and Louga (Sénégal). In November 2004, the Paul Gérin-Lajoie Foundation began an in-depth investigation of the labour supply and demand in Saint-Louis and Louga (Sénégal) with funding from IDRC (102844). Senegal, North ...

How will climate change affect the potential distribution of Eurasian Tree Sparrows Passer montanus in North America?

Science.gov (United States)

Graham, Jim; Jarnevich, Catherine; Young, Nick; Newman, Greg; Stohlgren, Thomas

2011-01-01

Habitat suitability models have been used to predict the present and future potential distribution of a variety of species. Eurasian tree sparrows Passer montanus, native to Eurasia, have established populations in other parts of the world. In North America, their current distribution is limited to a relatively small region around its original introduction to St. Louis, Missouri. We combined data from the Global Biodiversity Information Facility with current and future climate data to create habitat suitability models using Maxent for this species. Under projected climate change scenarios, our models show that the distribution and range of the Eurasian tree sparrow could increase as far as the Pacific Northwest and Newfoundland. This is potentially important information for prioritizing the management and control of this non-native species.

Tracking legacy radionuclides in St. Louis, Missouri, via unsupported "2"1"0Pb

International Nuclear Information System (INIS)

Kaltofen, Marco P.J.; Alvarez, Robert; Hixson, Lucas

2016-01-01

Analysis of 287 soil, sediment and house dust samples collected in a 200 km"2-zone in northern St. Louis County, Missouri, establish that offsite migration of radiological contaminants from Manhattan Project-era uranium processing wastes has occurred in this populated area. Specifically, 48% of samples (111 of a subset of 229 soils and sediments tested) had "2"1"0Pb concentrations above the risk-based soil cleanup limits for residential farming established by the US Department of Energy at the Fernald, OH, uranium plant, which handled and stored the same concentrated Manhattan Project-era wastes; the geographical distribution of the exceedances are consistent with water and radon gas releases from a landfill and related sites used to store and dispose of legacy uranium wastes; and offsite soil and house dust samples proximal to the landfill showed distinctive secular disequilibrium among uranium and its progeny indicative of uranium ore processing wastes. The secular disequilibrium of uranium progeny in the environment provides an important method for distinguishing natural uranium from industrial uranium wastes. In this study, the detection of unsupported "2"1"0Pb beyond expected atmospheric deposition rates is examined as a possible indicator of excessive radon emissions from buried uranium and radium-containing wastes. - Highlights: • We sampled and analyzed 287 urban soils and sediments for uranium processing wastes. • Radium and unsupported "2"1"0Pb were the primary tracers for wastes. • The goal was to track Manhattan Project wastes around St. Louis, MO. • Activity levels in the environment peaked around land disposal sites. • Unsupported "2"1"0Pb and isotopic uranium & thorium were also found in house dusts.

VNIR Multispectral Observations of Rocks at Spirit of St. Louis Crater and Marathon Valley on Th Rim of Endeavour Crater Made by the Opportunity Rover Pancam

Science.gov (United States)

Farrand, W. H.; Johnson, J. R.; Bell, J. F., III; Mittlefehldt, D.W.

2016-01-01

The Mars Exploration Rover Opportunity has been exploring the western rim of the 22 km diameter Endeavour crater since August, 2011. Recently, Opportunity has reached a break in the Endeavour rim that the rover team has named Mara-thon Valley. This is the site where orbital observations from the MRO CRISM imaging spectrometer indicated the presence of iron smectites. On the outer western portion of Marathon Valley, Opportunity explored the crater-form feature dubbed Spirit of St. Louis (SoSL) crater. This presentation describes the 430 to 1009 nm (VNIR) reflectance, measured by the rover's Pancam, of rock units present both at Spirit of St. Louis and within Marathon Valley.

Jean-Louis Déotte, Walter Benjamin et la forme plastique. Architecture, technique, lieux

OpenAIRE

Brabant, Dominik

2014-01-01

Une longue fréquentation de Walter Benjamin a permis à Jean-Louis Déotte de construire, progressivement, par touches successives et motifs récurrents sans cesse repris et retravaillés, une figure de l’œuvre qui n’en soit pas la simple exégèse toujours recommencée, mais bien la reconfiguration constante de son lieu, du site de son avoir-lieu, si l’on considère l’œuvre-Benjamin à l’image d’un événement. Walter Benjamin et la forme plastique constitue à cet égard une étape importante, sans postu...

Secretaris der natuur: de Franse conservatieve denker Louis de Bonald en zijn Theorie van de Macht

OpenAIRE

Audenaerde, Rolandus Franciscus Cornelis

2009-01-01

A reconstruction of the Théorie du Pouvoir, the first and major work of the French philosopher Louis de Bonald, shows that this work is best being read along the lines of political classicism: its syllogistic structure consists of a philosophical (deductive) maior, a historical (empirical) minor, and the political conclusion that the aristocratic authority and corporative forms characteristic of the preabsolutist era rather than ancien régime monarchy should be restored. As much as a frontal ...

The Matrix Regained: Reflections on the Use of the Grid in the Architectural Theories of Nicolaus Goldmann and Jean-Nicolas-Louis Durand

NARCIS (Netherlands)

Goudeau, J.J.W.

2015-01-01

In addition to the superficial visual similarities between the architectural theories of the Silesian-born, seventeenth-century Dutch mathematician Nicolaus Goldmann and the early nineteenth-century French architect Jean-Nicolas-Louis Durand, there is a more profound interconnection: their use of

Anatole Louis Garraux e o comércio de livros franceses em São Paulo (1860-1890 Anatole Louis Garraux and the trade of French books in São Paulo (1860-1890

Directory of Open Access Journals (Sweden)

Marisa Midori Deaecto

2008-06-01

Full Text Available O presente artigo busca recuperar o papel de Anatole Louis Garraux na promoção do comércio de livros franceses em São Paulo. Negociante natural de Paris, instalou-se na capital paulistana em 1860, vindo a se tornar o maior livreiro da cidade nas últimas décadas do século. Entre o processo de instalação da Casa Garraux e sua consagração no meio intelectual citadino, descobrimos que foram variados os seus empreendimentos e suas relações com o comércio franco-brasileiro. Todas, porém, situam-se no período de expansão do comércio de bens de consumo importados. Nesse sentido, o problema da circulação do livro será abordado na perspectiva de expansão do capitalismo editorial francês e das condições de consumo de livros existentes na capital.This article approaches some aspects of the bookseller Anatole Louis Garraux and the environment of the French publishing market in São Paulo. A French businessmen that came to this city in 1860, he became its biggest bookseller in the end of 19th century. Between the foundation of Casa Garraux and his recognition by city's intellectuals, we have found out his business had been become diversified in French-Brazilian trade. All of them, however, are located in time of international trade expansion of consumer goods. On this way, book will be approached by the point of view of Publishing Capitalism expansion and the consumption potential observed in the city.

Louis H. Bauer and the origins of civil aviation medicine.

Science.gov (United States)

Kraus, Theresa L

2012-12-01

With the passage of the Air Commerce Act in May 1926, civil aviation safety became a federal responsibility under the Department of Commerce (DoC). In November of that year, Louis Hopewell Bauer (1888-1964) became the DoC's first Aviation Medical Director. After earning his medical degree at the Harvard School of Medicine in 1912, Bauer joined the U.S. Army Medical Corps, where he helped develop the role of the military flight surgeon and then served as director of the Army's School of Aviation Medicine. Upon taking the federal position, he undertook to define medical standards and examination frequencies for civilian pilots and identifiy disqualifying conditions that could compromise a pilot's ability to operate an aircraft safely. Bauer also personally selected 57 private physicians (soon to be known as Aviation Medical Examiners) distributed across the country to give medical examinations for pilot licenses. Bauer subsequently played a leading role in organizing the Aviation Medical Association in 1929.

Louis-Eugène Varlin e a Comuna de Paris (1871

Directory of Open Access Journals (Sweden)

João Alberto da Costa Pinto

2011-03-01

Full Text Available O artigo propõe uma breve notícia sobre a trajetória política de Louis-Eugène Varlin (1839 - 1871, operário francês (encadernador de livros radicado em Paris (1852 - 1871, intelectual autodidata, um dos principais organizadores da seção francesa da AIT (Associação Internacional dos Trabalhadores a partir de 1865. Personagem emblemático nas lutas sociais acontecidas no período de setembro de 1870 a maio de 1871, quando do cerco à cidade pelas tropas prussianas e depois pelas tropas do governo Thiers, motivos que o levaram à participação no Comitê Central da Guarda Nacional, assim como à organização dos comitês distritais da Comuna (março a maio de 1871.     

Pouvoir et religion à la chapelle royale de Versailles sous Louis XIV Power and religion at the royal chapel of Versailles under Louis XIV

Directory of Open Access Journals (Sweden)

Alexandre Maral

2007-12-01

Full Text Available D’une manière peut‑être plus sensible que partout ailleurs, les objets et les insignes du pouvoir prennent une importance particulière dans le contexte du cérémonial liturgique de la religion catholique. À la chapelle royale de Versailles, la présence régulière du monarque et de sa cour complique encore la situation, d’autant que la desserte est assurée par deux corps distincts d’ecclésiastiques. Dépassant le simple cadre des préséances, Louis XIV a défini autour de sa personne royale un système rituel susceptible d’en manifester le caractère épiscopal dérivé du sacre. De même, l’enjeu juridictionnel représenté par la Chapelle royale se traduit par un jeu subtil d’attitudes, de gestes et de rites, chorégraphie sacrée qui accompagne et exprime les revendications des partisans et des adversaires de l’exemption du lieu de culte royal au regard du diocèse de Paris. Ce discours trouve un écho partiel dans le programme décoratif de la chapelle définitive du palais, achevée en 1710.Objects and symbols of power take on a particular importance in the liturgical ceremony of the Catholic Church, perhaps more so than in any other context. At the royal chapel of Versailles, the regular presence of the king and his court complicated the situation further, all the more so in that religious ceremony was administered by two distinct ecclesiastic bodies. Beyond the rules of precedence, Louis XIV had introduced around his royal persona a system of ritual that would manifest the episcopal identity conferred upon him by his coronation. Similarly, the jurisdictional authority represented by the royal chapel was conveyed in a subtle play of attitudes, gestures and rites, a symbolic choreography that accompanied and expressed the claims of the partisans and adversaries of the exemption of the royal place of worship with regard to the diocese of Paris. This stance was reflected in the decorative scheme of the palace�

2010 Critical Success Factors for the North Carolina Community College System. Twenty First Annual Report

Science.gov (United States)

North Carolina Community College System (NJ1), 2010

2010-01-01

First mandated by the North Carolina General Assembly in 1989 (S.L. 1989; C. 752; S. 80), the Critical Success Factors report has evolved into the major accountability document for the North Carolina Community College System. This twenty first annual report on the critical success factors is the result of a process undertaken to streamline and…

Les nouvelles frontières des Jeux Anthropologiques de Saint-Louis The new frontiers of the St. Louis Anthropological Games: sport and the racialization of the American nation at the onset of the twentieth century

Directory of Open Access Journals (Sweden)

Fabrice Delsahut

2012-06-01

Full Text Available En 1904, à Saint-Louis, les compétitions olympiques furent perdues dans le chaos d’une exposition universelle, la Louisiana Purchase Exposition. Les Jeux olympiques ne purent échapper à la montée des idéologies racistes du début du xxe siècle et ils contribuèrent à discuter du mérite athlétique des différentes races. Malgré l’esprit universel qu’on voulait y voir présider, Saint-Louis refléta longtemps les préjugés raciaux de leurs organisateurs. Ces derniers mirent aussi sur pied des compétitions spéciales, appelées pour l’occasion « journées anthropologiques », réservées à ceux que l’Amérique ségrégationniste du moment considérait comme des sous-hommes. À partir de ces faits, nous essaierons de montrer comment les sciences du sport et l’anthropologie naissante se mirent ensemble au service de causes aussi discutables que la hiérarchisation raciale et le droit à la colonisation et contribuèrent grandement à la naissance d’une nation américaine mettant le sport au cœur de sa constitution. L’impact des race studies sur les façons de penser le sport ne furent pas, contrairement à ce que s’efforcèrent de faire croire les différents présidents du C.I.O. au cours des décennies suivantes, qu’un simple avatar du mouvement olympique. Enfin, nous verrons l’influence de ce spectacle athlétique interracial en dehors des États-Unis qui a assurément permis d’élaborer une certaine perception de l’altérité et limiter l’insertion des peuples autochtones dans le tissu sportif mondial.In 1904, in St. Louis, the Olympic competitions were lost in the chaos of a World Fair called the Louisiana Purchase Exposition. The Olympic Games could not escape the rise in the racist ideologies of the 20th century and they contributed to the discussing of the athletic merit of the different races. In spite of the universal spirit that was expected to prevail, the Games of St. Louis showed the racial

Obituary: John Louis Africano III, 1951-2006

Science.gov (United States)

Barker, Edwin, S.

2007-12-01

The orbital debris, space surveillance, and astronomical communities lost a valued and beloved friend when John L. Africano passed away on July 27, 2006, at the young age of 55. John passed away in Honolulu, Hawaii, from complications following a heart attack suffered while playing racquetball, which was his avocation in life. Born on February 8, 1951, in Saint Louis, Missouri, John graduated with a B.S. in Physics from the University of Missouri at Saint Louis in 1973, and received a Master's degree in Astronomy from Vanderbilt University in 1974. John had a real love for astronomical observing and for conveying his many years of experience to others. He encouraged many young astronomers and mentored them in the basics of photometry and astronomical instrumentation. John was author or co-author on nearly one-hundred refereed publications ranging from analyses of cool stars to the timing of occultations to space surveillance. He was honored for his contributions to minor planet research when the Jet Propulsion Laboratory named Minor Planet 6391 (Africano) after him. John held operational staff positions at several major observatories including McDonald Observatory in Texas, Kitt Peak National Observatory in Arizona, and the Cloudcroft Telescope Facility in New Mexico. He observed at numerous observatories worldwide, including Cerro Tololo Inter-American Observatory (CTIO) in Chile, developing a world-wide network of friends and colleagues. John's ability to build diverse teams through his managerial and technical skills, not to mention his smiling personality, resulted in numerous successes in the observational astronomy and space surveillance arenas. As an astronomer for Boeing LTS Inc., he worked for many years at the Advanced Maui Optical and Space Surveillance site (AMOS) on Maui, Hawaii, where he contributed his operational and instrumental expertise to both the astronomy and space surveillance communities. He was also the co-organizer of the annual AMOS

Louis Blajan, Dottore in Medicina Veterinaria: Il dinamico veterinario che seppe traghettare l’Organizzazione Mondiale per la Sanità Animale (Office International des Épizooties: OIE nel mondo moderno

Directory of Open Access Journals (Sweden)

Anon.

2010-03-01

Full Text Available Nato il 10 aprile 1924 a Lahage (nell’Alta Garonna, in Francia, Louis Blajan si è spento lo scorso 10 febbraio 2010 a Mont-de-Marsan.Dopo aver frequentato il Lycée Pierre de Fermat di Tolosa, nel 1948 Louis completa gli studi presso la Scuola di Veterinaria di Tolosa. Nel 1949, si diploma all’Institut d’élevage et de médecine vétérinaire des pays tropicaux (IEMVT e dal 1949 al 1952 è nel territorio d’oltremare francese del Mali. Tornato in Francia, dal 1953 al 1968 Louis esercita come veterinario di Stato presso il Ministero dell’Agricoltura, responsabile per l’afta epizootica, la peste suina e la malattia di Newcastle, nonché come Presidente del Comitato consultivo per le malattie infettive. In seguito, viene nominato Ispettore capo veterinario e Responsabile per la politica di controllo delle frontiere.Nel 1952, Louis sposa Janine, moglie affezionata che lo appoggia con ardore in ogni fase della sua carriera e perde la vita in un incidente un mese prima che il marito vada in pensione nel 1990.Dal 1968 al 1977, Louis è Direttore tecnico di Cofranimex (Compagnie Française pour l’importation et l’exportation des animaux reproducteurs et leur semence e dal 1977 al 1978 riveste il ruolo di Direttore dell’Association pour le développement des techniques de l’élevage français (ADETEF.Louis entra a lavorare nell’Office International des Épizooties (oggi noto come Organizzazione Mondiale per la Sanità Animale o ‘OIE’ dove, dal 1978 al 1980, occupa la posizione di Direttore del Dipartimento tecnico. Due anni più tardi, nel 1980, viene eletto Direttore Generale, coronando il sogno di ogni professionista della medicina veterinaria e raggiungendo l’apice della propria carriera. Rieletto nel 1985, si ritira dalla vita lavorativa nel 1990.Durante gli anni in cui fu a capo dell’OIE, Louis seppe trasformare quella che all’epoca era una struttura antiquata in un’organizzazione internazionale moderna ed

"To serve the community best": reconsidering Black politics in the struggle to save Homer G. Phillips Hospital in St. Louis, 1976-1984.

Science.gov (United States)

Kirouac-Fram, Jaclyn

2010-01-01

The move to consolidate, and eventually to close, Homer G. Phillips Hospital sparked a major uprising in St. Louis, Missouri, during the years 1976 through 1984. This article explores the struggle in St. Louis’s black community to keep open, and later to reopen, Homer G. Phillips Hospital from a vantage point that demonstrates the diversity of opinion surrounding the struggle. For many black St. Louis residents, the physical space of Homer G. Phillips Hospital was a metaphor for identity, a manifestation of citizenship rights, and a means of delineating a territory of shared histories, understandings, and values. For others, it was a relic of segregation and racism. In seeking to understand the diversity of public reaction, this article addresses class antagonism, examines the varied and divergent motivations for eliminating or maintaining services at the hospital, and reconsiders the discourse of "black politics." It is a decisive illustration of how the national twin crises of deindustrialization and privatization affected a heterogeneous black community.

Perceptions of Medicinal Plant Use Amongst the Hispanic Population in the St. Louis Metropolitan Area

Directory of Open Access Journals (Sweden)

Kim M. Grafford

2016-10-01

Full Text Available Introduction: Medicinal plant use in the United States has increased as reported by the National Center of Complementary and Integrative Health and U.S. Census Bureau.However, little is known about how many minority groups in the United States use medicinal plants.There is a rise in the Hispanic population; a community with a steep tradition of medicinal plant use, in the U.S., so understanding the perceptions of medicinal plant use is useful to healthcare providers. Methods: A survey was designed to gauge a better understanding of the perceptions of medicinal plant use amongst Latino patients with varying education levels who reside in the St. Louis Metropolitan Area. Survey questions highlighted the perceptions of medicinal plants use, patient communication regarding medicinal plant use with healthcare providers (pharmacists and doctors, and the impact the education level has on medicinal plant use. Results: Surveys were distributed to six different investigational sites around the St. Louis Metropolitan Area from August 2015 to December 2015. Survey respondents identified 45 different plants/herbs that they currently use or had used at some point in their life. Those with higher levels of education had varying opinions on medicinal plant use with their current practices. Conclusion: The participants’ high interest in the use of medicinal plants exemplifies the need for enhanced communication between patients and healthcare professionals about medicinal plant use. However, it was hard to determine whether the participants’ level of education had any direct relationship to this use. Conflict of Interest None   Type: Original Research

Le règne de Louis XIV, ou la rupture définitive entre la société française et la monarchie

OpenAIRE

Bouveresse, Jacques

2018-01-01

Le règne de Louis XIV, comme Janus, présente deux faces. La première de ces faces qui correspond au vingt-cinq premières années du règne est brillante et lumineuse. Tout s’ordonne autour du roi dans un bel ordonnancement classique. Louis XIV est le maître de la guerre et de la paix. Il est entouré d’une cour brillante où il n’y a pas que des courtisans mais aussi beaucoup d’hommes capables et compétents. À partir des années 1680 – et à cet égard la révocation de l’Édit de Nantes en 1685 est u...

Solar heating and hot water system installed at Saint Louis, Missouri

Science.gov (United States)

1980-01-01

The solar heating and hot water system installed at the William Tao & Associates, Inc., office building in St. Louis, Missouri is described, including maintenance and construction problems, final drawings, system requirements, and manufacturer's component data. The solar system was designed to provide 50 percent of the hot water requirements and 45 percent of the space heating needs for a 900 sq ft office space and drafting room. The solar facility has 252 sq ft of glass tube concentrator collectors and a 1000 gallon steel storage tank buried below a concrete slab floor. Freeze protection is provided by a propylene glycol/water mixture in the collector loop. The collectors are roof mounted on a variable tilt array which is adjusted seasonally and is connected to the solar thermal storage tank by a tube-in-shell heat exchanger. Incoming city water is preheated through the solar energy thermal storage tank.

Center for Molecular Electronics, University of Missouri, St. Louis. Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

1994-06-01

The Department of Energy (DOE) proposes to authorize the University of Missouri, St. Louis to proceed with the detailed design and construction of the proposed Center for Molecular Electronics. The proposed Center would consist of laboratories and offices housed in a three-story building on the University campus. The proposed modular laboratories would be adaptable for research activities principally related to physics, chemistry, and electrical engineering. Proposed research would include the development and application of thin-film materials, semi-conductors, electronic sensors and devices, and high-performance polymers. Specific research for the proposed Center has not yet been formulated, therefore, specific procedures for any particular process or study cannot be described at this time. The proposed construction site is an uncontaminated panel of land located on the University campus. This report contains information about the environmental assessment that was performed in accordance with this project.

The mitochondrial genomes of Atlas Geckos (Quedenfeldtia): mitogenome assembly from transcriptomes and anchored hybrid enrichment datasets

OpenAIRE

Lyra, Mariana L.; Joger, Ulrich; Schulte, Ulrich; Slimani, Tahar; El Mouden, El Hassan; Bouazza, Abdellah; Künzel, Sven; Lemmon, Alan R.; Moriarty Lemmon, Emily; Vences, Miguel

2017-01-01

The nearly complete mitogenomes of the two species of North African Atlas geckos, Quedenfeldtia moerens and Q. trachyblepharus were assembled from anchored hybrid enrichment data and RNAseq data. Congruent assemblies were obtained for four samples included in both datasets. We recovered the 13 protein-coding genes, 22 tRNA genes, and two rRNA genes for both species, including partial control region. The order of genes agrees with that of other geckos.

Evaluating the Implementation of a Twitter-Based Foodborne Illness Reporting Tool in the City of St. Louis Department of Health

Directory of Open Access Journals (Sweden)

Jenine K. Harris

2018-04-01

Full Text Available Foodborne illness is a serious and preventable public health problem affecting 1 in 6 Americans with cost estimates over $50 billion annually. Local health departments license and inspect restaurants to ensure food safety and respond to reports of suspected foodborne illness. The City of St. Louis Department of Health adopted the HealthMap Foodborne Dashboard (Dashboard, a tool that monitors Twitter for tweets about food poisoning in a geographic area and allows the health department to respond. We evaluated the implementation by interviewing employees of the City of St. Louis Department of Health involved in food safety. We interviewed epidemiologists, environmental health specialists, health services specialists, food inspectors, and public information officers. Participants viewed engaging innovation participants and executing the innovation as challenges while they felt the Dashboard had relative advantage over existing reporting methods and was not complex once in place. This study is the first to examine practitioner perceptions of the implementation of a new technology in a local health department. Similar implementation projects should focus more on process by developing clear and comprehensive plans to educate and involve stakeholders prior to implementation.

National-Louis University: When a Pair of Dreamers Gets Together, the Result Is a $30-Million Gift--And a New International University.

Science.gov (United States)

Currents, 1993

1993-01-01

Through $33 million in gifts, Michael W. Louis has helped convert century-old National College of Education (Illinois) into a multicampus, nationwide university pioneering ways to make education available to working adults. The process began with a friendship between a college president with a vision and an industrial heir who appreciated it. (MSE)

Louis Massignon l'amour mystique ou l'extase dans l'abandon

Directory of Open Access Journals (Sweden)

Jacques Keryell

2008-09-01

Full Text Available Parler de Massignon et de son Amour de Dieu n'est pas chose aisée. En effet, si les mystiques musulmans des premiers siècles de l'hégire ont été les hérauts de cet Amour : Al-Hallâj, Râbia al-Adawiyya, Al-Niffâri, Ibn Arabi, Ansâri, Al-Ghazâli, l'Amour de Dieu comme tel, n'est pas au cœur du "ilm al kalâm", de la théologie musulmane traditionnelle. Pour Massignon, langue et spiritualité étaient intimement liées. Si je devais me placer dans une perspective musulmane, je dirais que Louis Massignon se situe dans la ligne de la "wahdat al shuhûd", celle de "l'unicité du témoignage" ou Dieu se témoigne Lui-même en son mystère dans le cœur du soufi.

75 FR 20382 - Chrysler LLC, St. Louis North Assembly Plant, Including On-Site Leased Workers From HAAS TCM, Inc...

Science.gov (United States)

2010-04-19

...., Diversified Contract Service, Inc. 639, and Logistics Management Services, Inc., Fenton, MO; Amended... Logistics Management Services, Inc. worked on-site at the Chrysler LLC, Fenton, Missouri plant (Logistics... Department is amending this certification to include workers leased from Logistics Management Services, Inc...

75 FR 20384 - Chrysler LLC, St. Louis North Assembly Plant, Including On-Site Leased Workers From Haas TCM, Inc...

Science.gov (United States)

2010-04-19

.... Diversified Contract Service, Inc. 639, and Logistics Management Services, Inc. Fenton, MO; Amended... Logistics Management Services, Inc. worked on-site at the Chrysler LLC, Fenton, Missouri plant (Logistics... Department is amending this certification to include workers leased from Logistics Management Services, Inc...

North American forest disturbance mapped from a decadal Landsat record

Science.gov (United States)

Jeffrey G. Masek; Chengquan Huang; Robert Wolfe; Warren Cohen; Forrest Hall; Jonathan Kutler; Peder. Nelson

2008-01-01

Forest disturbance and recovery are critical ecosystem processes, but the spatial pattern of disturbance has never been mapped across North America. The LEDAPS (Landsat Ecosystem Disturbance Adaptive Processing System) project has assembled a wall-to-wall record of stand-clearing disturbance (clearcut harvest, fire) for the United States and Canada for the period 1990-...

De Novo Genome and Transcriptome Assembly of the Canadian Beaver (Castor canadensis

Directory of Open Access Journals (Sweden)

Si Lok

2017-02-01

Full Text Available The Canadian beaver (Castor canadensis is the largest indigenous rodent in North America. We report a draft annotated assembly of the beaver genome, the first for a large rodent and the first mammalian genome assembled directly from uncorrected and moderate coverage (< 30 × long reads generated by single-molecule sequencing. The genome size is 2.7 Gb estimated by k-mer analysis. We assembled the beaver genome using the new Canu assembler optimized for noisy reads. The resulting assembly was refined using Pilon supported by short reads (80 × and checked for accuracy by congruency against an independent short read assembly. We scaffolded the assembly using the exon–gene models derived from 9805 full-length open reading frames (FL-ORFs constructed from the beaver leukocyte and muscle transcriptomes. The final assembly comprised 22,515 contigs with an N50 of 278,680 bp and an N50-scaffold of 317,558 bp. Maximum contig and scaffold lengths were 3.3 and 4.2 Mb, respectively, with a combined scaffold length representing 92% of the estimated genome size. The completeness and accuracy of the scaffold assembly was demonstrated by the precise exon placement for 91.1% of the 9805 assembled FL-ORFs and 83.1% of the BUSCO (Benchmarking Universal Single-Copy Orthologs gene set used to assess the quality of genome assemblies. Well-represented were genes involved in dentition and enamel deposition, defining characteristics of rodents with which the beaver is well-endowed. The study provides insights for genome assembly and an important genomics resource for Castoridae and rodent evolutionary biology.

Uranium characterization at the St. Louis Airport Site

International Nuclear Information System (INIS)

Schilk, A.J.; Hubbard, C.W.; Bowyer, T.W.; Reiman, R.T.

1995-05-01

In support of the Department of Energy/Office of Technology Development's Expedited Site Characterization (ESC) project (coordinated by Ames Laboratory), the Pacific Northwest Laboratory demonstrated two complementary technologies at the St. Louis Airport (SLAP) site that have been designed and optimized for the rapid, in situ quantification of radionuclide contamination in surface soils. The sensors are optimized for the detection of high-energy beta particles or gamma rays emitted from the decay of specific radionuclides of interest. These technologies were demonstrated by measuring the beta and gamma fluxes at several locations within the SLAP site. Measurements were converted to average contamination levels, using detector calibrations performed with spiked samples (beta) or sealed sources (gamma). Additionally, subsurface activity levels were derived from discrete soil samples (provided by the ESC field crew) via gamma-ray spectrometry in a controlled laboratory setting. Since the beta and gamma sensor technologies are intrinsically sensitive to different types of radiation and activity distributions (i.e., surface and shallow subsurface, respectively), the data obtained from the two detectors provide complementary information about the distribution of the contamination. The results reported here suggest that a number of locations within the SLAP site have elevated levels of 211 U, and the differences between the beta and gamma activities indicate that the contamination is largely located near the surface of the soil

Risky business: focus-group analysis of sexual behaviors, drug use and victimization among incarcerated women in St. Louis.

Science.gov (United States)

Millay, Tamara A; Satyanarayana, Veena A; O'Leary, Catina C; Crecelius, Robert; Cottler, Linda B

2009-09-01

Incarcerated women report multiple vulnerabilities and, yet, are under-represented in research. This study used focus-group methodology to explore high-risk sexual behaviors, drug use, and victimization among female offenders in St. Louis. Inmates of the St. Louis Medium Security Institution (MSI) were invited to participate in one of five focus groups between May and September 2005 in preparation for an NIH/NINR HIV-prevention intervention study among female offenders in Drug Court. The focus group sample of 30 women was 70% African-American, with a mean age of 36 years. Results indicated that oral sex was the most common sex trade activity. Consistent with the literature, condom usage was described as irregular. In terms of drug use, participants reported that crack was most commonly used, with binges often lasting for several days. Regarding victimization, women frequently reported sexual abuse in childhood, and some described abusive relationships as adults. Participants also reported being beaten and raped by customers, which led to their concealing knives in purses and razors under the tongue. Consequently, perpetrated violence, including murder, was reported as protection against further violence. These findings confirm the vulnerability of this population of women who are at high risk for HIV. Effective HIV-prevention interventions are needed to assist these incarcerated women in making lifestyle changes during incarceration and sustaining them after release.

Cowboys et Indiens. Masculinités, métissage et queeritude chez Tomson Highway et Louis Hamelin

Directory of Open Access Journals (Sweden)

Corrie Scott

2013-12-01

Full Text Available Corrie Scott analyse tour à tour les masculinités autochtones construites par le romancier québécois Louis Hamelin dans Cowboy (1992 et celles proposées par l’écrivain cri Tomson Highway dans Champion et Ooneemeetoo [Kiss of the Fur Queen] (1998. Scott démontre que les deux auteurs jouent différemment du métissage et de son rapport avec le colonialisme : tandis que Hamelin met en scène des personnages autochtones dévirilisés et en perte d’authenticité, Highway s’appuie sur la notion amérindienne de bispiritualité pour créer des personnages queer qui transcendent les constructions binaires sur lesquelles se base la masculinité hégémonique. Corrie Scott examines the notion of métissage in the representation of Indigenous masculinities in Cowboy by Québécois novelist Louis Hamelin (1992 and in Kiss of the Fur Queen by Cree novelist Tomson Highway (1998. Scott shows the different ways in which the two authors approach the notion of métissage and its relationship with colonialism: while Hamelin depicts hybrid Indigenous characters as less authentic and virile, Highway embraces a queer poetics that questions hegemonic masculinities and gendered colonial stereotypes through hybrid fictional male identities. An intersectional theoretical framework proves essential to the analysis of hegemonic masculinities which function hand in hand with colonialism.

Hydrogeology and ground-water flow of the drift and Platteville aquifer system, St Louis Park, Minnesota

Science.gov (United States)

Lindgren, R.J.

1995-01-01

Three aquifers and two confining units have been delineated within the drift underlying the area near the site of a former coal-tar distillation and wood-preserving plant in St. Louis Park, Minnesota. The hydrogeologic units of the drift, in descending order, are the upper drift aquifer, the upper drift confining unit, the middle drift aquifer, the lower drift confining unit. and the lower drift aquifer. A contamination plume consisting of coal-tar derivatives exists in the drift aquifers and in the Platteville aquifer underlying the southern part of the plant site and areas to the south and east of the plant site.

100TH T-38C Delivery Ceremony (Defense Acquisition Review Journal)

National Research Council Canada - National Science Library

Ott, David D; Davis, James B

2002-01-01

... using a mass/craft assembly stationary dock approach, For a successful transition from conventional to Lean production, program management support is critical, The T-38 Program Office in St, Louis...

Correlations between the North China Craton and the Indian Shield: Constraints from regional metallogeny

Directory of Open Access Journals (Sweden)

Caifeng Li

2015-11-01

Full Text Available The correlation between the North China Craton (NCC and the Indian Shield (IND has been a hot topic in recent years. On the basis of ore deposit databases, the NCC and IND have shown broad similarity in metallogenesis from the middle Archaean to the Mesoproterozoic. The two blocks both have three major metallogenic systems: (1 the Archaean BIF metallogenic system; (2 the Paleoproterozoic Cu-Pb-Zn metallogenic system; and (3 the Mesoproterozoic Fe-Pb-Zn system. In the north margin of the NCC and the west margin of the IND, the Archaean BIF-Au-Cu-Pb-Zn deposits had the same petrogenesis and host rocks, the Paleoproterozoic Cu-Pb-Zn deposits were controlled by active belts, and the Mesoproterozoic Fe-Pb-Zn deposits were mainly related to multi-stage rifting. Matching regional mineralization patterns and geological features has established the continental assembly referred to as “NCWI”, an acronym for the north margin of the NCC (NC and the west margin of the IND (WI during the middle Archaean to the Mesoproterozoic. In this assembly, the available geological and metallogenic data from the Eastern Block and active belts of NC fit those from the Dharwar craton and the Aravalli–Delhi–Vindhyan belt of WI, respectively. Moreover, the depositional model and environment of Paleoproterozoic metasedimentary manganese deposits in NCWI implied that the assembly may be located at low latitudes, where the conditions were favorable for dissolving ice and precipitating manganese deposits.

De Louis Delluc à Caligari... L'introduction du cinéma allemand en France

Directory of Open Access Journals (Sweden)

Marc Lavastrou

2011-12-01

Full Text Available Dès 1919, le boycott du cinéma allemand interdit toute confrontation avec les réalisations de l'ennemi héréditaire. Cette négation inquiète Louis Delluc qui réagit en publiant deux articles sur la situation du cinéma allemand. Ces chroniques proposent un premier état des lieux mais, sans film distribué, ces analyses restent lettre morte et ne font que souligner ce manque. Il faut attendre 1921 et la création de la revue Cinéa pour que Delluc organise la première projection du Cabinet du docteur Caligari. Cet événement prend vite une ampleur nationale. Le succès mondial de ce film démontre la possibilité d'un équilibre entre industrie mondialisée et spécificité nationale. Dès lors, le cinéma allemand peut servir de modèle pour la recherche d'une telle unité au sein du cinéma français dont la crise structurelle démontre son incapacité à s'adapter aux nouvelles exigences du marché global. Louis Delluc parvient donc à imposer les productions allemandes en France, mais il ne réussit cependant pas à effectuer la transition entre artisanat anarchique et industrie cinématographique rationalisée. Ainsi, une autre unité voit-elle le jour, dépassant les cadres nationaux pour s'inscrire sur le vaste espace européen ouvrant ainsi la voie à des échanges culturels et techniques franco-allemands.Seit 1919 verhindert das Verbot des deutschen Kinos in Frankreich jegliche Konfrontation mit den Produktionen des Erzfeindes. Diese Ablehnung des deutschen Films beschäftigt und beunruhigt Louis Delluc, der daraufhin zwei Artikel über die Situation des deutschen Films veröffentlicht. Seine Artikel zeigen einen ersten Stand der Dinge auf, der aber in Anbetracht fehlender deutscher Filmvorführungen keine weitere Beachtung findet. Erst im Jahr 1921 wird mit der Revue Cinéa, deren Gründer Delluc ist, eine erste Aufführung des Kabinett des Dr. Caligari organisiert. Dieses Ereignis nimmt schnell nationale Dimensionen an. Der

Exploration and development of offshore oil and gas fields. [North Sea

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

In the last 9 years, the British companies, based on their rich engineering and commercial experience, have directed a considerable part of their material and manpower resources at developing oil and gas fields in the North Sea. The technological innovations used by British industry are: aero- and marine surveys to prospect for oil, underwater laying of pipelines, arrangement of platforms, etc.; exploratory drilling in the open sea and on dry land; design of platforms with regard for the depth of the water and unique weather conditions of the North Sea, their assembly and development; use of auxiliary ships and helicopters, and diving equipment.

Approach to Assessing the Long-term Performance of Wall Assemblies – Durability of Low-rise Wood-frame walls

DEFF Research Database (Denmark)

Lacasse, Michael A.; Morelli, Martin

2017-01-01

a limit-states design (LSD) approach to the performance assessment of the assembly. In this paper emphasis is placed on a further development of the LSD approach within the context of requirements set out in ISO 13823 “General principles on the design of structures for durability”. An example is presented...... in which the LSD approach is applied to low-rise wood-frame walls, as are built in North America, and that incorporate drainage components, such components forming part of a rain screen wall assembly. The use of this approach permits determining whether wall assemblies incorporating novel components...

Transcripts of Regional Hearings, St. Louis, Missouri. Annex L to Adjusting to the Drawdown. Report of the Defense Conversion Commission

Science.gov (United States)

1992-08-01

entrepreneurship courses for laid-off McDonnell Douglas employees. Over 500 have participated in the classes. • McDonnell Douglas donated its lease-hold...international programs and organizations • Analysis of regional financing programs The St. Louis World Trade Center franchise was acquired for the region...averaged over the 1970’s, the defense cutbacks are likely contribute only a small part of that objective. 2 38 7 Figure 5.3 REAL GDP BASE VS

La Maison du Roi sous Louis XIV, une troupe d’élite. Étude tactique

OpenAIRE

Chauviré, Frédéric

2009-01-01

La Maison du roi constitue le corps le plus prestigieux de l’armée royale. Mais c’est aussi une troupe d’élite, redoutée sur tous les champs de bataille. Sa supériorité tactique trouve son origine dans la singularité de sa doctrine de combat. Beaucoup plus manœuvrière que les régiments ordinaires, elle s’en distingue également par sa conduite de la charge : choix de l’arme blanche, adoption d’une allure élevée et recherche du choc. Les qualités de cette troupe expliquent que Louis XIV ait vou...

Saint Louis Center for Sustainment of Trauma and Readiness Skills: A Collaborative Air Force-Civilian Trauma Skills Training Program

Science.gov (United States)

2016-05-19

NUMBER 6. AUTHOR(S) Jason W. Grimm , Karen Johnson 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION...ABSTRACT SAR 18. NUMBER OF PAGES 5 19a. NAME OF RESPONSIBLE PERSON Jason Grimm a. REPORT U b. ABSTRACT U c. THIS PAGE U 19b... Grimm Karen Johns For correspo Vista at Gra J Emerg Nu 0099-1767 Published b http://dx.do ■ ■ • ■SAINT LOUIS CENTER FOR SUSTAINMENT OF TRAUMA AND

De novo transcriptome assembly of the calanoid copepod Neocalanus flemingeri: A new resource for emergence from diapause.

Science.gov (United States)

Roncalli, Vittoria; Cieslak, Matthew C; Sommer, Stephanie A; Hopcroft, Russell R; Lenz, Petra H

2018-02-01

Copepods, small planktonic crustaceans, are key links between primary producers and upper trophic levels, including many economically important fishes. In the subarctic North Pacific, the life cycle of copepods like Neocalanus flemingeri includes an ontogenetic migration to depth followed by a period of diapause (a type of dormancy) characterized by arrested development and low metabolic activity. The end of diapause is marked by the production of the first brood of eggs. Recent temperature anomalies in the North Pacific have raised concerns about potential negative effects on N. flemingeri. Since diapause is a developmental program, its progress can be tracked using through global gene expression. Thus, a reference transcriptome was developed as a first step towards physiological profiling of diapausing females using high-throughput Illumina sequencing. The de novo transcriptome, the first for this species was designed to investigate the diapause period. RNA-Seq reads were obtained for dormant to reproductive N. flemingeri females. A high quality de novo transcriptome was obtained by first assembling reads from each individual using Trinity software followed by clustering with CAP3 Assembly Program. This assembly consisted of 140,841transcripts (contigs). Bench-marking universal single-copy orthologs analysis identified 85% of core eukaryotic genes, with 79% predicted to be complete. Comparison with other calanoid transcriptomes confirmed its quality and degree of completeness. Trinity assembly of reads originating from multiple individuals led to fragmentation. Thus, the workflow applied here differed from the one recommended by Trinity, but was required to obtain a good assembly. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Thermal load histories for North American roof assembles using various cladding materials including wood-thermoplastic composite shingles

Science.gov (United States)

J. E. Winandy

2006-01-01

Since 1991, thermal load histories for various roof cladding types have been monitored in outdoor attic structures that simulate classic North American light-framed construction. In this paper, the 2005 thermal loads for wood-based composite roof sheathing, wood rafters, and attics under wood-plastic composite shingles are compared to common North American roof...

The Emperor Jones de Louis Gruenberg : le long voyage au cœur/corps de l’Autre race Louis Gruenberg’s Emperor Jones: The Long Journey into the Heart of the Other Race

Directory of Open Access Journals (Sweden)

Benoît Depardieu

2009-11-01

Full Text Available On January 7, 1933, two years before Gershwin’s Porgy and Bess, The Emperor Jones, composed by Louis Gruenberg in 1931, had its world premiere at the Metropolitan Opera of New York. Although Gruenberg’s opera looks like a mere musical adaptation of O’Neill’s acclaimed play, first performed in 1920, some alterations made by the composer allow to question its ambivalent reception by the audience and the critics. Apart from the singular choice of O’Neill’s play and Gruenberg’s special interest in African American music and vocal traditions, this paper analyses the influence of the Harlem Renaissance period and the fantasmatics of race, present in both the play and the opera, albeit exacerbated in the latter through the scopic enjoyment of the body of the black Other.

Ecosystem Management Decision Support (EMDS) Applied to Watershed Assessment on California's North Coast

Science.gov (United States)

Rich Walker; Chris Keithley; Russ Henly; Scott Downie; Steve Cannata

2007-01-01

In 2001, the state of California initiated the North Coast Watershed Assessment Program (2003a) to assemble information on the status of coastal watersheds that have historically supported anadromous fish. The five-agency consortium explored the use of Ecosystem Management Decision Support (EMDS) (Reynolds and others 1996) as a means to help assess overall watershed...

Science and the applications of science from Louis Pasteur to Jacques Monod.

Science.gov (United States)

Schwartz, Maxime

2015-06-01

Jacques Monod's ideas on the applications of science came within the scope of a long tradition at the Institut Pasteur. Louis Pasteur, whose scientific career was characterized by a permanent come and go between science and its applications, long opposed the idea of getting any income from his research, until the financial needs of the Institut Pasteur made him change his mind. As for Jacques Monod, he remained a fervent supporter of basic science during his whole scientific career. However, once he became director of the Institut Pasteur, he realized that the applications of research had to be developed to support the institute from a financial point of view. Thus, he reorganized the valorization of research in the institute, through an incitation of scientists to develop projects with possible applications, and by creating a company, Institut Pasteur Production, for which he had a factory built, and which was in charge of producing and commercializing the vaccines and reagents stemming from the research at the Institut Pasteur. Copyright © 2015 Académie des sciences. Published by Elsevier SAS. All rights reserved.

Espíritos cheios de bichos: A fauna nas viagens de Louis Agassiz e Richard Francis Burton pelo Brasil oitocentista

Directory of Open Access Journals (Sweden)

Janaina Zito Losada

2015-04-01

Full Text Available O Brasil do século XIX foi alvo de inúmeras viagens realizadas por cientistas estrangeiros. O objetivo deste artigo é analisar as impressões sobre a fauna brasileira presentes nos relatos das viagens realizadas pelo naturalista suíço Louis Agassiz, em 1865, e pelo explorador inglês Richard Francis Burton, em 1868. Destes relatos privilegiam-se as descrições do meio natural de diferentes regiões brasileiras e das particularidades da fauna silvestre por eles encontrada.

Louis Figuier translated in Brazil: science popularizers in the last quarter of 19th century

Directory of Open Access Journals (Sweden)

Kaori Kodama

2017-06-01

Full Text Available This article aims to address aspects of the history of the divulgation of sciences in Brazil in the nineteenth century, through the analysis of the circulation of some translations into Portuguese of the works of French popularizer of science, Louis Figuier. His works, which were translated to different languages, received editions in Brazil and Portugal since late 1860. During this period, a model of popularization of science for non-specialists - working class, women and youth - with emphasis on applied science was gaining terrain. However, this model was also marked by limitations and discontinuities that reflect social issues in the passage to the twentieth century. This paper attempts to highlight the role of translators and editors, understood as mediators of science, whose projects of social reform was primarily focused in popular instruction.

[The apothecaries of the Saint-Honoré district of Paris in the 17th century. The apothecaries Antoine and Jacques Grégoire and Louis XIII’s first painter, Simon Vouet].

Science.gov (United States)

Warolin, Christian

2016-12-01

This article presents the biographies of the apothecaries who lived in the Rue Saint-Honoré in Paris in the 17th century. Two major facts emerge from this study. The first concerns the formation of a family network involving the apothecaries and the royal artists. The apothecaries Antoine and Jacques Grégoire became allied with Simon Vouet, the first painter of Louis XIII . Links were also made between Antoine Grégoire and Jacques Sarazin, the King’s sculptor, and then with Michel Corneille, painter to the King. The famous painting by Simon Vouet hanging in the assembly hall of the Faculty of Pharmacy in Paris is probably the fruit of his collaboration with Jacques Grégoire, his brother-in-law and an erudite botanist. The other notable fact concerns the relations between Anne de Furnes, widow of Antoine Brulon, the rich apothecary to the King Antoine Brulon, and Molière, both in Paris and in the village of Auteuil. The other notable fact concerns the relations between Anne de Furnes, widow of Antoine Brulon, the rich apothecary to the King Antoine Brulon, and Molière, both in Paris and in the village of Auteuil.

Robotically Assembled Aerospace Structures: Digital Material Assembly using a Gantry-Type Assembler

Science.gov (United States)

Trinh, Greenfield; Copplestone, Grace; O'Connor, Molly; Hu, Steven; Nowak, Sebastian; Cheung, Kenneth; Jenett, Benjamin; Cellucci, Daniel

2017-01-01

This paper evaluates the development of automated assembly techniques for discrete lattice structures using a multi-axis gantry type CNC machine. These lattices are made of discrete components called "digital materials." We present the development of a specialized end effector that works in conjunction with the CNC machine to assemble these lattices. With this configuration we are able to place voxels at a rate of 1.5 per minute. The scalability of digital material structures due to the incremental modular assembly is one of its key traits and an important metric of interest. We investigate the build times of a 5x5 beam structure on the scale of 1 meter (325 parts), 10 meters (3,250 parts), and 30 meters (9,750 parts). Utilizing the current configuration with a single end effector, performing serial assembly with a globally fixed feed station at the edge of the build volume, the build time increases according to a scaling law of n4, where n is the build scale. Build times can be reduced significantly by integrating feed systems into the gantry itself, resulting in a scaling law of n3. A completely serial assembly process will encounter time limitations as build scale increases. Automated assembly for digital materials can assemble high performance structures from discrete parts, and techniques such as built in feed systems, parallelization, and optimization of the fastening process will yield much higher throughput.

Prevalence of Cigarette Advertising and Other Promotional Strategies at the Point of Sale in St Louis, Missouri: Analysis by Store Type and Distance From a School

Science.gov (United States)

Colditz, Graham; Moreland-Russell, Sarah; Cyr, Julianne; Snider, Doneisha; Schootman, Mario

2014-01-01

Introduction Point-of-sale advertising provides an opportunity for the tobacco industry to communicate with current and potential smokers. The US Family Smoking Prevention and Tobacco Control Act allows states to implement policies requiring that tobacco products be placed out of sight, and the Food and Drug Administration is considering banning point-of-sale advertising within 1,000 feet of schools. Our objective was to compare cigarette point-of-sale advertising near schools with grades prekindergarten through 12 and by store type. Methods All registered cigarette retailers (n = 1,229) and schools (n = 581) in the city of St Louis and St Louis County were geocoded and mapped by using ArcGIS. Retailers were divided into 2 groups, those within 1,000 feet and those within 1,001 to 2,000 feet of a school; 200 retailers from each group were randomly selected. We assessed tobacco interior and exterior advertising, brands advertised, discounts, gifts with purchase, “no sales to minors” signage, and cigarette functional items (eg, advertising on shopping baskets). Analyses were done by distance from a school and store type. Results We analyzed 340 retailers. Most retailers within 1,000 feet (91.2%) and from 1,001 to 2,000 feet (94.2%) of a school displayed cigarette advertising (P = .20). Convenience stores had the highest number of interior ads. In multivariable models, distance from school explained 0.2% of the variance in total advertising. Conclusion Cigarette point-of-sale advertising is highly prevalent in St Louis within 1,000 feet of schools. A ban based on distance from a school might decrease advertising exposure, but its effect on smoking prevalence is yet to be determined because advertising farther from schools would still prevail. PMID:24742394

Prevalence of cigarette advertising and other promotional strategies at the point of sale in St Louis, Missouri: analysis by store type and distance from a school.

Science.gov (United States)

Barnoya, Joaquin; Colditz, Graham; Moreland-Russell, Sarah; Cyr, Julianne; Snider, Doneisha; Schootman, Mario

2014-04-17

Point-of-sale advertising provides an opportunity for the tobacco industry to communicate with current and potential smokers. The US Family Smoking Prevention and Tobacco Control Act allows states to implement policies requiring that tobacco products be placed out of sight, and the Food and Drug Administration is considering banning point-of-sale advertising within 1,000 feet of schools. Our objective was to compare cigarette point-of-sale advertising near schools with grades prekindergarten through 12 and by store type. All registered cigarette retailers (n = 1,229) and schools (n = 581) in the city of St Louis and St Louis County were geocoded and mapped by using ArcGIS. Retailers were divided into 2 groups, those within 1,000 feet and those within 1,001 to 2,000 feet of a school; 200 retailers from each group were randomly selected. We assessed tobacco interior and exterior advertising, brands advertised, discounts, gifts with purchase, "no sales to minors" signage, and cigarette functional items (eg, advertising on shopping baskets). Analyses were done by distance from a school and store type. We analyzed 340 retailers. Most retailers within 1,000 feet (91.2%) and from 1,001 to 2,000 feet (94.2%) of a school displayed cigarette advertising (P = .20). Convenience stores had the highest number of interior ads. In multivariable models, distance from school explained 0.2% of the variance in total advertising. Cigarette point-of-sale advertising is highly prevalent in St Louis within 1,000 feet of schools. A ban based on distance from a school might decrease advertising exposure, but its effect on smoking prevalence is yet to be determined because advertising farther from schools would still prevail.

Sequence assembly

DEFF Research Database (Denmark)

Scheibye-Alsing, Karsten; Hoffmann, S.; Frankel, Annett Maria

2009-01-01

Despite the rapidly increasing number of sequenced and re-sequenced genomes, many issues regarding the computational assembly of large-scale sequencing data have remain unresolved. Computational assembly is crucial in large genome projects as well for the evolving high-throughput technologies and...... in genomic DNA, highly expressed genes and alternative transcripts in EST sequences. We summarize existing comparisons of different assemblers and provide a detailed descriptions and directions for download of assembly programs at: http://genome.ku.dk/resources/assembly/methods.html....

XVI 'Jacques-Louis Lions' Spanish-French School on Numerical Simulation in Physics and Engineering

CERN Document Server

Roldán, Teo; Torrens, Juan

2016-01-01

This book presents lecture notes from the XVI ‘Jacques-Louis Lions’ Spanish-French School on Numerical Simulation in Physics and Engineering, held in Pamplona (Navarra, Spain) in September 2014. The subjects covered include: numerical analysis of isogeometric methods, convolution quadrature for wave simulations, mathematical methods in image processing and computer vision, modeling and optimization techniques in food processes, bio-processes and bio-systems, and GPU computing for numerical simulation. The book is highly recommended to graduate students in Engineering or Science who want to focus on numerical simulation, either as a research topic or in the field of industrial applications. It can also benefit senior researchers and technicians working in industry who are interested in the use of state-of-the-art numerical techniques in the fields addressed here. Moreover, the book can be used as a textbook for master courses in Mathematics, Physics, or Engineering.

Bacteriophage Assembly

Directory of Open Access Journals (Sweden)

Anastasia A. Aksyuk

2011-02-01

Full Text Available Bacteriophages have been a model system to study assembly processes for over half a century. Formation of infectious phage particles involves specific protein-protein and protein-nucleic acid interactions, as well as large conformational changes of assembly precursors. The sequence and molecular mechanisms of phage assembly have been elucidated by a variety of methods. Differences and similarities of assembly processes in several different groups of bacteriophages are discussed in this review. The general principles of phage assembly are applicable to many macromolecular complexes.

Jean-Louis Guereña (éd.), La sexualidad en la España contemporánea (1808-1950)

OpenAIRE

Heras, Beatriz de las

2013-01-01

Interesante compilación de artículos que incluye la edición a cargo de Jean-Louis Guereña y el servicio de publicaciones de la Universidad de Cádiz. Un volumen que, partiendo de la historia social y cultural (el editor señala que «esta historia social de la sexualidad ha de ser al mismo tiempo una historia cultural de la sexualidad»), se acerca a un tema tradicionalmente olvidado por los historiadores españoles, que no por la academia francesa o anglosajona: la sexualidad en los siglos xix y ...

Optimizing Transcriptome Assemblies for Eleusine indica Leaf and Seedling by Combining Multiple Assemblies from Three De Novo Assemblers

Directory of Open Access Journals (Sweden)

Shu Chen

2015-03-01

Full Text Available Due to rapid advances in sequencing technology, increasing amounts of genomic and transcriptomic data are available for plant species, presenting enormous challenges for biocomputing analysis. A crucial first step for a successful transcriptomics-based study is the building of a high-quality assembly. Here, we utilized three different de novo assemblers (Trinity, Velvet, and CLC and the EvidentialGene pipeline tr2aacds to assemble two optimized transcript sets for the notorious weed species, . Two RNA sequencing (RNA-seq datasets from leaf and aboveground seedlings were processed using three assemblers, which resulted in 20 assemblies for each dataset. The contig numbers and N50 values of each assembly were compared to study the effect of read number, k-mer size, and in silico normalization on assembly output. The 20 assemblies were then processed through the tr2aacds pipeline to remove redundant transcripts and to select the transcript set with the best coding potential. Each assembly contributed a considerable proportion to the final transcript combination with the exception of the CLC-k14. Thus each assembler and parameter set did assemble better contigs for certain transcripts. The redundancy, total contig number, N50, fully assembled contig number, and transcripts related to target-site herbicide resistance were evaluated for the EvidentialGene and Trinity assemblies. Comparing the EvidentialGene set with the Trinity assembly revealed improved quality and reduced redundancy in both leaf and seedling EvidentialGene sets. The optimized transcriptome references will be useful for studying herbicide resistance in and the evolutionary process in the three allotetraploid offspring.

Signatures of self-assembly in size distributions of wood members in dam structures of Castor canadensis

Directory of Open Access Journals (Sweden)

David M. Blersch

2014-12-01

Full Text Available Beavers (Castor canadensis construct dams on rivers throughout most of their historical range in North America, and their impact on water patterns in the landscape is considerable. Dam formation by beavers involves two processes: (1 intentional construction through the selection and placement of wood and sediment, which facilitates (2 the passive capture and accretion of suspended wood and sediment. The second process is a self-assembly mechanism that the beavers leverage by utilizing energy subsidies of watershed transport processes. The relative proportion of beaver activity to self-assembly processes in dam construction, however, is unknown. Here we show that lotic self-assembly processes account for a substantial portion of the work expended in beaver dam construction. We found through comprehensive measurement of the stick dimensions that the distributions for diameter, length, and volume are log-normal. By noting evidence of teeth markings, we determined that size distributions skewed significantly larger for wood handled by beavers compared to those that were not. Subsequent mass calculations suggest that beavers perform 50%–70% of the work of wood member placement for dam assembly, with riparian self-assembly processes contributing the remainder. Additionally, our results establish a benchmark for assessing the proportion of self-assembly work in similar riparian structures. Keywords: Beaver dam, Construction, Castor canadensis, Self-assembly, Distribution, Wood

The editing of Louis Adamic's book The Eagle and the Roots

Directory of Open Access Journals (Sweden)

Janja Žitnik Serafin

1989-12-01

Full Text Available The Eagle and the Roots is Louis Adamic's last book and, in his own opinion, his most important one. The printed version of that work is an expurgated version of the author's typescript which is preserved in several incomplete copies, kept in various public and private archives in Yugoslavia and in the United States. The work was written on the basis of the author's personal impressions during his second visit to his native land in 1949. The published version of The Eagle and the Roots discusses the political and economic conditions in Yugoslavia in 1949, the moods of the Yugoslav people, their top politicians and intellectuals at the time of the first five-year plan (Book One, including a biography of Josip Broz Tito until 1945 with an outline of the most important events in the country before and during World War II (Book Two. In various passages scattered in both books, it describes the selfsacrifice and the resistance of the Yugoslav people during the Liberation War. An important subject is the dissention between Tito and Stalin which had its germs in the prewar period. The author follows its development through the war and during the first years after the liberation until the Cominform resolution in June 1948.

North Slope Decision Support for Water Resource Planning and Management

Energy Technology Data Exchange (ETDEWEB)

Schnabel, William; Brumbelow, Kelly

2013-03-31

The objective of this project was to enhance the water resource decision-making process with respect to oil and gas exploration/production activities on Alaska’s North Slope. To this end, a web-based software tool was developed to allow stakeholders to assemble, evaluate, and communicate relevant information between and amongst themselves. The software, termed North Slope Decision Support System (NSDSS), is a visually-referenced database that provides a platform for running complex natural system, planning, and optimization models. The NSDSS design was based upon community input garnered during a series of stakeholder workshops, and the end product software is freely available to all stakeholders via the project website. The tool now resides on servers hosted by the UAF Water and Environmental Research Center, and will remain accessible and free-of-charge for all interested stakeholders. The development of the tool fostered new advances in the area of data evaluation and decision support technologies, and the finished product is envisioned to enhance water resource planning activities on Alaska’s North Slope.

Fuel assemblies

International Nuclear Information System (INIS)

Nakatsuka, Masafumi.

1979-01-01

Purpose: To prevent scattering of gaseous fission products released from fuel assemblies stored in an fbr type reactor. Constitution; A cap provided with means capable of storing gas is adapted to amount to the assembly handling head, for example, by way of threading in a storage rack of spent fuel assemblies consisting of a bottom plate, a top plate and an assembly support mechanism. By previously eliminating the gas inside of the assembly and the cap in the storage rack, gaseous fission products upon loading, if released from fuel rods during storage, are stored in the cap and do not scatter in the storage rack. (Horiuchi, T.)

Louis Essen and the Velocity of Light: From Wartime Radar to Unit of Length

Science.gov (United States)

Essen, Ray

2010-03-01

Louis Essen (1908-1997), working at the National Physical Laboratory in Teddington, England, was the first scientist to realize that the value for the velocity of light used widely during World War II was incorrect. In 1947 he published his first determination of it, which was 16 kilometers per second higher than the accepted value, causing a great deal of controversy in the scientific community. His new value was not accepted for several years, until it was shown that it improved the precision of range-finding by radar. Essen’s result has remained as the internationally accepted value despite a number of attempts to improve on it. I discuss Essen’s work and also examine other optical and nonoptical determinations that were made in the United States, and their limits of accuracy. I also identify the reasons why it took so long for Essen’s new value to be accepted, and how it led to changes in the definition of the units of length and time.

Effects of virus dose and extrinsic incubation temperature on vector competence of Culex nigripalpus (Diptera: Culicidae) for St. Louis encephalitis virus.

Science.gov (United States)

Richards, Stephanie L; Anderson, Sheri L; Lord, Cynthia C; Tabachnick, Walter J

2012-11-01

Culex nigripalpus Theobald is a primary vector of St. Louis encephalitis virus in the southeastern United States. Cx. nigripalpus females were fed blood containing a low (4.0 +/- 0.01 log10 plaque-forming unit equivalents (PFUeq) /ml) or high (4.7 +/- 0.1 log10 PFUeq/ml) St. Louis encephalitis virus dose and maintained at extrinsic incubation temperatures (EIT) of 25 or 28 degrees C for 12 d. Vector competence was measured via quantitative real-time reverse transcriptase polymerase chain reaction to estimate PFUeq using rates of infection, dissemination, and transmission. There were no differences in infection rates between the two EITs at either dose. The low dose had higher infection rates at both EITs. Dissemination rates were significantly higher at 28 degrees C compared with 25 degrees C at both doses. Virus transmission was observed (<7%) only at 28 degrees C for both doses. The virus titer in body tissues was greater at 28 degrees C compared with 25 degrees C at both doses. The difference between the EITs was greater at the low dose, resulting in a higher titer for the low dose than the high dose at 28 degrees C. Virus titers in leg tissues were greater in mosquitoes fed the high versus low dose, but were not influenced by EIT. Further investigations using a variety of environmental and biological factors would be useful in exploring the complexity of vector competence.

1950s Athens as Palimpsest: A BBC Radio Play by Louis MacNeice

Directory of Open Access Journals (Sweden)

Konstantina Georganta

2015-11-01

Full Text Available Louis MacNeice’s Portrait of Athens, a radio play broadcast by the BBC in November 1951, came at a time of reconstruction throughout Europe but also at a time when the world was on the verge of yet another war. In it we find the city’s bones, Athens of Thucydides, Demosthenes, Pericles and Socrates, but also a modern city where you could hear street cries, radio tunes and trams and visit both Kolonaki and the district of New Smyrna where Asia Minor refugees had settled almost thirty years earlier. Twenty-four centuries were transposed to twenty-four hours and twenty-four hours squeezed into the space of one with the play focusing on questions of memory, identity, and lived or remembered traumas. What the audience got as a result was a representation of the varied layers that made up modern Athens, a portrait of the city as palimpsest in contrast to other accounts of the same period where the past dominated over the present making the latter non visible.

Descending into the swamp. An analysis of the relationship between Louis and Lestat in Anne Rice's “Interview with the vampire” and the consequences of their unspoken love.

OpenAIRE

Haukås, Hege

2017-01-01

My thesis explores the relationship of Anne Rice's characters Louis de Pointe du Lac and Lestat Lioncourt, with emphasis on the consequences of their unspoken love. Focusing on the several emotional bonds that tie them together through transformation of becoming a vampire, of their vampire family and the consequences of their unrealised love.

Seeds of Failure in Colbert's Baltic Policy.

Science.gov (United States)

Mackey, Richard William

1984-01-01

This investigation of French mercantilist initiatives and policies in the seventeenth century focuses on the attempts of Colbert, the controller general of finance to Louis XIV, to stimulate French trade with the Baltic by establishing a Company of the North. (RM)

Sensor mount assemblies and sensor assemblies

Science.gov (United States)

Miller, David H [Redondo Beach, CA

2012-04-10

Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

Bathymetric surveys at highway bridges crossing the Missouri and Mississippi Rivers near St. Louis, Missouri, 2010

Science.gov (United States)

Huizinga, Richard J.

2011-01-01

Bathymetric surveys were conducted by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, on the Missouri and Mississippi Rivers in the vicinity of 12 bridges at 7 highway crossings near St. Louis, Missouri, in October 2010. A multibeam echo sounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 3,280 to 4,590 feet long and extending across the active channel of the Missouri and Mississippi Rivers. These bathymetric scans provide a snapshot of the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be used by the Missouri Department of Transportation to assess the bridges for stability and integrity issues with respect to bridge scour.

Macroinvertebrate community assembly in pools created during peatland restoration

Energy Technology Data Exchange (ETDEWEB)

Brown, Lee E., E-mail: l.brown@leeds.ac.uk; Ramchunder, Sorain J.; Beadle, Jeannie M.; Holden, Joseph

2016-11-01

Many degraded ecosystems are subject to restoration attempts, providing new opportunities to unravel the processes of ecological community assembly. Restoration of previously drained northern peatlands, primarily to promote peat and carbon accumulation, has created hundreds of thousands of new open water pools. We assessed the potential benefits of this wetland restoration for aquatic biodiversity, and how communities reassemble, by comparing pool ecosystems in regions of the UK Pennines on intact (never drained) versus restored (blocked drainage-ditches) peatland. We also evaluated the conceptual idea that comparing reference ecosystems in terms of their compositional similarity to null assemblages (and thus the relative importance of stochastic versus deterministic assembly) can guide evaluations of restoration success better than analyses of community composition or diversity. Community composition data highlighted some differences in the macroinvertebrate composition of restored pools compared to undisturbed peatland pools, which could be used to suggest that alternative end-points to restoration were influenced by stochastic processes. However, widely used diversity metrics indicated no differences between undisturbed and restored pools. Novel evaluations of restoration using null models confirmed the similarity of deterministic assembly processes from the national species pool across all pools. Stochastic elements were important drivers of between-pool differences at the regional-scale but the scale of these effects was also similar across most of the pools studied. The amalgamation of assembly theory into ecosystem restoration monitoring allows us to conclude with more certainty that restoration has been successful from an ecological perspective in these systems. Evaluation of these UK findings compared to those from peatlands across Europe and North America further suggests that restoring peatland pools delivers significant benefits for aquatic fauna by

Macroinvertebrate community assembly in pools created during peatland restoration

International Nuclear Information System (INIS)

Brown, Lee E.; Ramchunder, Sorain J.; Beadle, Jeannie M.; Holden, Joseph

2016-01-01

Many degraded ecosystems are subject to restoration attempts, providing new opportunities to unravel the processes of ecological community assembly. Restoration of previously drained northern peatlands, primarily to promote peat and carbon accumulation, has created hundreds of thousands of new open water pools. We assessed the potential benefits of this wetland restoration for aquatic biodiversity, and how communities reassemble, by comparing pool ecosystems in regions of the UK Pennines on intact (never drained) versus restored (blocked drainage-ditches) peatland. We also evaluated the conceptual idea that comparing reference ecosystems in terms of their compositional similarity to null assemblages (and thus the relative importance of stochastic versus deterministic assembly) can guide evaluations of restoration success better than analyses of community composition or diversity. Community composition data highlighted some differences in the macroinvertebrate composition of restored pools compared to undisturbed peatland pools, which could be used to suggest that alternative end-points to restoration were influenced by stochastic processes. However, widely used diversity metrics indicated no differences between undisturbed and restored pools. Novel evaluations of restoration using null models confirmed the similarity of deterministic assembly processes from the national species pool across all pools. Stochastic elements were important drivers of between-pool differences at the regional-scale but the scale of these effects was also similar across most of the pools studied. The amalgamation of assembly theory into ecosystem restoration monitoring allows us to conclude with more certainty that restoration has been successful from an ecological perspective in these systems. Evaluation of these UK findings compared to those from peatlands across Europe and North America further suggests that restoring peatland pools delivers significant benefits for aquatic fauna by

Macroinvertebrate community assembly in pools created during peatland restoration.

Science.gov (United States)

Brown, Lee E; Ramchunder, Sorain J; Beadle, Jeannie M; Holden, Joseph

2016-11-01

Many degraded ecosystems are subject to restoration attempts, providing new opportunities to unravel the processes of ecological community assembly. Restoration of previously drained northern peatlands, primarily to promote peat and carbon accumulation, has created hundreds of thousands of new open water pools. We assessed the potential benefits of this wetland restoration for aquatic biodiversity, and how communities reassemble, by comparing pool ecosystems in regions of the UK Pennines on intact (never drained) versus restored (blocked drainage-ditches) peatland. We also evaluated the conceptual idea that comparing reference ecosystems in terms of their compositional similarity to null assemblages (and thus the relative importance of stochastic versus deterministic assembly) can guide evaluations of restoration success better than analyses of community composition or diversity. Community composition data highlighted some differences in the macroinvertebrate composition of restored pools compared to undisturbed peatland pools, which could be used to suggest that alternative end-points to restoration were influenced by stochastic processes. However, widely used diversity metrics indicated no differences between undisturbed and restored pools. Novel evaluations of restoration using null models confirmed the similarity of deterministic assembly processes from the national species pool across all pools. Stochastic elements were important drivers of between-pool differences at the regional-scale but the scale of these effects was also similar across most of the pools studied. The amalgamation of assembly theory into ecosystem restoration monitoring allows us to conclude with more certainty that restoration has been successful from an ecological perspective in these systems. Evaluation of these UK findings compared to those from peatlands across Europe and North America further suggests that restoring peatland pools delivers significant benefits for aquatic fauna by

Mobius Assembly: A versatile Golden-Gate framework towards universal DNA assembly.

Directory of Open Access Journals (Sweden)

Andreas I Andreou

Full Text Available Synthetic biology builds upon the foundation of engineering principles, prompting innovation and improvement in biotechnology via a design-build-test-learn cycle. A community-wide standard in DNA assembly would enable bio-molecular engineering at the levels of predictivity and universality in design and construction that are comparable to other engineering fields. Golden Gate Assembly technology, with its robust capability to unidirectionally assemble numerous DNA fragments in a one-tube reaction, has the potential to deliver a universal standard framework for DNA assembly. While current Golden Gate Assembly frameworks (e.g. MoClo and Golden Braid render either high cloning capacity or vector toolkit simplicity, the technology can be made more versatile-simple, streamlined, and cost/labor-efficient, without compromising capacity. Here we report the development of a new Golden Gate Assembly framework named Mobius Assembly, which combines vector toolkit simplicity with high cloning capacity. It is based on a two-level, hierarchical approach and utilizes a low-frequency cutter to reduce domestication requirements. Mobius Assembly embraces the standard overhang designs designated by MoClo, Golden Braid, and Phytobricks and is largely compatible with already available Golden Gate part libraries. In addition, dropout cassettes encoding chromogenic proteins were implemented for cost-free visible cloning screening that color-code different cloning levels. As proofs of concept, we have successfully assembled up to 16 transcriptional units of various pigmentation genes in both operon and multigene arrangements. Taken together, Mobius Assembly delivers enhanced versatility and efficiency in DNA assembly, facilitating improved standardization and automation.

A new era in science at Washington University, St. Louis: Viktor Hamburger's zoology department in the 1940's.

Science.gov (United States)

Carson, H L

2001-04-01

In the early 1940s, the administration of the College of Arts and Sciences at Washington University, St. Louis was firmly in the hands of classical scholars who were not inclined to promote the development of modern research on scientific subjects. Funds supporting research in biology favored the School of Medicine and the Missouri Botanical Garden. Viktor Hamburger arrived at Washington University in 1935. At about the time he became the Acting Chairman of Zoology in 1942, research work in the biological departments began a dramatic surge that has continued to this day. For 65 years under his counsel and leadership, basic biology has thrived at this fine institution. As an early faculty recruit, I recount here a few personal recollections from those formative years.

Geostatistical three-dimensional modeling of oolite shoals, St. Louis Limestone, southwest Kansas

Science.gov (United States)

Qi, L.; Carr, T.R.; Goldstein, R.H.

2007-01-01

In the Hugoton embayment of southwestern Kansas, reservoirs composed of relatively thin (Big Bow and Sand Arroyo Creek fields. Lithofacies in uncored wells were predicted from digital logs using a neural network. The tilting effect from the Laramide orogeny was removed to construct restored structural surfaces at the time of deposition. Well data and structural maps were integrated to build 3-D models of oolitic reservoirs using stochastic simulations with geometry data. Three-dimensional models provide insights into the distribution, the external and internal geometry of oolitic deposits, and the sedimentologic processes that generated reservoir intervals. The structural highs and general structural trend had a significant impact on the distribution and orientation of the oolitic complexes. The depositional pattern and connectivity analysis suggest an overall aggradation of shallow-marine deposits during pulses of relative sea level rise followed by deepening near the top of the St. Louis Limestone. Cemented oolitic deposits were modeled as barriers and baffles and tend to concentrate at the edge of oolitic complexes. Spatial distribution of porous oolitic deposits controls the internal geometry of rock properties. Integrated geostatistical modeling methods can be applicable to other complex carbonate or siliciclastic reservoirs in shallow-marine settings. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

Collaboration of Art and Science in Albert Edelfelt's Portrait of Louis Pasteur: The Making of an Enduring Medical Icon.

Science.gov (United States)

Weisberg, Richard E; Hansen, Bert

2015-01-01

Historians of medicine--and even Louis Pasteur's biographers--have paid little attention to his close relationship with the Finnish artist Albert Edelfelt. A new look at Edelfelt's letters to his mother, written in Swedish and never quoted at length in English, reveals important aspects of Pasteur's working habits and personality. By understanding the active collaboration through which this very famous portrait was made, we also discover unnoticed things in the painting itself, gain a new appreciation of its original impact on the French public's image of science, and better understand its enduring influence on the portrayal of medicine in the art and the popular culture of many countries even to the present day.

Programmed Nanomaterial Assemblies in Large Scales: Applications of Synthetic and Genetically- Engineered Peptides to Bridge Nano-Assemblies and Macro-Assemblies

Energy Technology Data Exchange (ETDEWEB)

Matsui, Hiroshi

2014-09-09

Work is reported in these areas: Large-scale & reconfigurable 3D structures of precise nanoparticle assemblies in self-assembled collagen peptide grids; Binary QD-Au NP 3D superlattices assembled with collagen-like peptides and energy transfer between QD and Au NP in 3D peptide frameworks; Catalytic peptides discovered by new hydrogel-based combinatorial phage display approach and their enzyme-mimicking 2D assembly; New autonomous motors of metal-organic frameworks (MOFs) powered by reorganization of self-assembled peptides at interfaces; Biomimetic assembly of proteins into microcapsules on oil-in-water droplets with structural reinforcement via biomolecular recognition-based cross-linking of surface peptides; and Biomimetic fabrication of strong freestanding genetically-engineered collagen peptide films reinforced by quantum dot joints. We gained the broad knowledge about biomimetic material assembly from nanoscale to microscale ranges by coassembling peptides and NPs via biomolecular recognition. We discovered: Genetically-engineered collagen-like peptides can be self-assembled with Au NPs to generate 3D superlattices in large volumes (> μm{sup 3}); The assembly of the 3D peptide-Au NP superstructures is dynamic and the interparticle distance changes with assembly time as the reconfiguration of structure is triggered by pH change; QDs/NPs can be assembled with the peptide frameworks to generate 3D superlattices and these QDs/NPs can be electronically coupled for the efficient energy transfer; The controlled assembly of catalytic peptides mimicking the catalytic pocket of enzymes can catalyze chemical reactions with high selectivity; and, For the bacteria-mimicking swimmer fabrication, peptide-MOF superlattices can power translational and propellant motions by the reconfiguration of peptide assembly at the MOF-liquid interface.

Politica e censura nella Francia di Louis XIV: Chavigny de La Bretonnière

Directory of Open Access Journals (Sweden)

Chiara Mainardi

2012-06-01

Full Text Available During the reign of Louis XIV French libertines were expressing their intellectual dissent by opposing absolutism and criticising historical and religious conflicts. While in France, before abrogating the Edict of Nantes, any opposition was suppressed, Chavigny de La Bretonnière supported a revolt against the Church and political power. The prominent role of clandestine literature in Old Regime France will be analysed in this paper by considering critical studies about libertinage. In particular, the political and antireligious discourse carried on by this author will be highlighted by taking into account his ‘lardons’, satirical articles against French government, his erotic novel La Religieuse en chemise and his ecclesiastic pamphlet Le Cochon mitré. In a true editorial campaign, Chavigny de La Bretonnière attaches French royal power, through the use of satire he depicts corrupted prelates as obscene creatures and he reforms libertine dialogue by enhancing broad political purposes. As a response to his critics and claims, Chavigny was kidnapped, tortured and imprisoned for life. His name disappeared from history.

Aerial radiometric and magnetic survey: St. Louis national topographic map, Illinois/Missouri. Final report

International Nuclear Information System (INIS)

1981-01-01

The results of analyses of the airborne gamma radiation and total magnetic field survey flown for the region identified as the St. Louis National Topographic Map NJ15-6 is presented in this report. The airborne data gathered is reduced by ground computer facilities to yield profile plots of the basic uranium, thorium and potassium equivalent gamma radiation intensities, ratios of these intensities, aircraft altitude above the earth's surface, total gamma ray and earth's magnetic field intensity, correlated as a function of geologic units. The distribution of data within each geologic unit, for all surveying map lines and tie lines, has been calculated and is included. Two sets of profiled data for each line are included, with one set displaying the above-cited data. The second set includes only flight line magnetic field, temperature, pressure, altitude data plus magnetic field data as measured at a base station. A general description of the area, including descriptions of the various geologic units and the corresponding airborne data, is included also

H.R. 4533: A Bill to require that remediation of certain defense-related radioactive wastes currently located in the city and county of St. Louis, Missouri, be conducted in a nonurban area. Introduced in the House of Representatives, One Hundredth First Congress, Second Session, April 18, 1990

International Nuclear Information System (INIS)

Anon.

1990-01-01

The Department of Energy is directed to remove all radioactive wastes generated by the Manhattan Engineer District and the Atomic Energy Commission, as a result of the processing of uranium and thorium for use in nuclear weapons production, from St. Louis and St. Louis County, Missouri. The US DOE is further directed to transport the wastes to a nonurban site in Missouri for remediation and processing and to restore the properties from which the wastes have been removed to a condition capable of supporting industrial, commercial, recreational, or other appropriate uses

North Anna Power Station - Unit 1: Overview of steam generator replacement project activities

International Nuclear Information System (INIS)

Gettler, M.W.; Bayer, R.K.; Lippard, D.W.

1993-01-01

The original steam generators at Virginia Electric and Power Company's (Virginia Power) North Anna Power Station (NAPS) Unit 1 have experienced corrosion-related degradation that require periodic inspection and plugging of steam generator tubes to ensure their continued safe and reliable operation. Despite improvements in secondary water chemistry, continued tube degradation in the steam generators necessitated the removal from service of approximately 20.3 percent of the tubes by plugging, (18.6, 17.3, and 25.1 for steam generators A, B, and C, respectively). Additionally, the unit power was limited to 95 % during, its last cycle of operation. Projections of industry and Virginia Power experience indicated the possibility of mid-cycle inspections and reductions in unit power. Therefore, economic considerations led to the decision to repair the steam generators (i.e., replace the steam generator lower assemblies). Three new Model 51F Steam Generator lower assembly units were ordered from Westinghouse. Virginia Power contracted Bechtel Power Corporation to provide the engineering and construction support to repair the Unit 1 steam generators. On January 4, 1993, after an extended coastdown period, North Anna Unit 1 was brought off-line and the 110 day (breaker-to-breaker) Steam Generator Replacement Project (SGRP) outage began. As of this paper, the outage is still in progress

Radiological survey of the Mallinckrodt Chemical Works, St. Louis, Missouri

International Nuclear Information System (INIS)

Goldsmith, W.A.; Leggett, R.W.; Haywood, F.F.

1981-12-01

The results of a radiological survey of part of the Mallinckrodt Chemical Works (former Destrehan and Broadway Street plants), St. Louis, Missouri, are presented. During the period 1942 through 1957, this site was used for various projects involving the production of purified uranium from pitchblende concentrates. The survey included measurements of the following: residual alpha and beta-gamma contamination levels in the existing buildings that were used in the uranium projects; external gamma radiation levels at 1 m above the surface in these buildings and outdoors around these buildings; radon and radon daughter concentrations in the air in these buildings; uranium, radium, actinium, and thorium concentrations in surface and subsurface soil on the site; concentrations of radionuclides in water and sediment found in drains both inside and outside the buildings; and concentrations of radionuclides in ground and surface water on the site and in river water taken near the site. Alpha and beta-gamma contamination levels inside and outside some of the buildings were above limits set by current federal guidelines concerning the release of property for unrestricted use. Elevated external gamma radiation levels were measured at some outdoor locations and in some of the buildings. Licensable concentrations of uranium were found in soil at some places, and the concentration of uranium in a water sample taken from a core hole between Buildings 100 and 101 was in excess of limits set by current federal standards. Radon and radon daughter concentrations in three buildings were in excess of current federal guidelines for nonoccupational radiation exposure

Radiological survey of the Mallinckrodt Chemical Works, St. Louis, Missouri

Energy Technology Data Exchange (ETDEWEB)

Goldsmith, W A; Leggett, R W; Haywood, F F

1981-12-01

The results of a radiological survey of part of the Mallinckrodt Chemical Works (former Destrehan and Broadway Street plants), St. Louis, Missouri, are presented. During the period 1942 through 1957, this site was used for various projects involving the production of purified uranium from pitchblende concentrates. The survey included measurements of the following: residual alpha and beta-gamma contamination levels in the existing buildings that were used in the uranium projects; external gamma radiation levels at 1 m above the surface in these buildings and outdoors around these buildings; radon and radon daughter concentrations in the air in these buildings; uranium, radium, actinium, and thorium concentrations in surface and subsurface soil on the site; concentrations of radionuclides in water and sediment found in drains both inside and outside the buildings; and concentrations of radionuclides in ground and surface water on the site and in river water taken near the site. Alpha and beta-gamma contamination levels inside and outside some of the buildings were above limits set by current federal guidelines concerning the release of property for unrestricted use. Elevated external gamma radiation levels were measured at some outdoor locations and in some of the buildings. Licensable concentrations of uranium were found in soil at some places, and the concentration of uranium in a water sample taken from a core hole between Buildings 100 and 101 was in excess of limits set by current federal standards. Radon and radon daughter concentrations in three buildings were in excess of current federal guidelines for nonoccupational radiation exposure.

Louis Pasteur, language, and molecular chirality. I. Background and dissymmetry.

Science.gov (United States)

Gal, Joseph

2011-01-01

Louis Pasteur resolved sodium ammonium (±)-tartrate in 1848, thereby discovering molecular chirality. Although hindered by the primitive state of organic chemistry, he introduced new terminology and nomenclature for his new science of molecular and crystal chirality. He was well prepared for this task by his rigorous education and innate abilities, and his linguistic achievements eventually earned him membership in the supreme institution for the French language, the Académie française. Dissymmetry had been in use in French from the early 1820s for disruption or absence of symmetry or for dissimilarity or difference in appearance between two objects, and Pasteur initially used it in the latter connotation, without any reference to handedness or enantiomorphism. Soon, however, he adopted it in the meaning of chirality. Asymmetry had been in use in French since 1691 but Pasteur ignored it in favor of dissymmetry. The two terms are not synonymous but it is not clear whether Pasteur recognized this difference in choosing the former over the latter. However, much of the literature mistranslates his dissymmetry as asymmetry. Twenty years before Pasteur the British polymath John Herschel proposed that optical rotation in the noncrystalline state is due to the "unsymmetrical" [his term] nature of the molecules and later used dissymmetrical for handed. Chirality, coined by Lord Kelvin in 1894 and introduced into chemistry by Mislow in 1962, has nearly completely replaced dissymmetry in the meaning of handedness, but the use of dissymmetry continues today in other contexts for lack of symmetry, reduction of symmetry, or dissimilarity. Copyright © 2010 Wiley-Liss, Inc.

Self-assembly of self-assembled molecular triangles

Indian Academy of Sciences (India)

While the solution state structure of 1 can be best described as a trinuclear complex, in the solidstate well-fashioned intermolecular - and CH- interactions are observed. Thus, in the solid-state further self-assembly of already self-assembled molecular triangle is witnessed. The triangular panels are arranged in a linear ...

[The chief surgeon Claude Louis Sommé (1772-1855) French military physician, surgeon of Antwerp hospital].

Science.gov (United States)

Tricot, Jean-pierre

2015-01-01

Claude Louis Sommé was born in Paris in 1772. After surgical studies between 1790 and 1792, he successfully embraced a military career in the armies of Napoleon at different fronts and in several hospitals. In 1806 he submitted his doctoral thesis at the Special Medical School of Strasburg, Dissertation upon Pain. The same year he presented his dismissal from he imperial armies and became chief-surgeon at the St Elisabeth hospital of Antwerp where he stayed on duty until his death in 1855. Sommé wrote a lot of medical books: surgical, anatomical and physiological. After the battle of Waterloo one third of the injured soldiers were transferred to Antwerp and were attended in his department. He also played an important role as a professor at the Primary Medical School of Antwerp. Sommé also created the botanical garden of Antwerp, close to the hospital.

Evaluation of nine popular de novo assemblers in microbial genome assembly.

Science.gov (United States)

Forouzan, Esmaeil; Maleki, Masoumeh Sadat Mousavi; Karkhane, Ali Asghar; Yakhchali, Bagher

2017-12-01

Next generation sequencing (NGS) technologies are revolutionizing biology, with Illumina being the most popular NGS platform. Short read assembly is a critical part of most genome studies using NGS. Hence, in this study, the performance of nine well-known assemblers was evaluated in the assembly of seven different microbial genomes. Effect of different read coverage and k-mer parameters on the quality of the assembly were also evaluated on both simulated and actual read datasets. Our results show that the performance of assemblers on real and simulated datasets could be significantly different, mainly because of coverage bias. According to outputs on actual read datasets, for all studied read coverages (of 7×, 25× and 100×), SPAdes and IDBA-UD clearly outperformed other assemblers based on NGA50 and accuracy metrics. Velvet is the most conservative assembler with the lowest NGA50 and error rate. Copyright © 2017. Published by Elsevier B.V.

Élites intellectuelles françaises, élites intellectuelles grecques et la « question de la langue » en Grèce dans les années 1920 et 1930 : le cas de Louis Roussel

OpenAIRE

Calvié, Julien

2016-01-01

Louis Roussel a tenu dans l’histoire du néo-hellénisme en France un rôle de pionnier. Son journal, Libre, qui parut régulièrement de décembre 1922 à juillet 1936, nous fournit une vision très riche et très vivante de la vie intellectuelle athénienne dans les années 1920 et 1930.Nous étudierons successivement la représentation des partisans de la langue savante et la représentation des démoticistes dans Libre. Nous conclurons en constatant que Louis Roussel a, sur « la question de la langue » ...

A conceptual design of assembly strategy and dedicated tools for assembly of 40o sector

International Nuclear Information System (INIS)

Park, H.K.; Nam, K.O.; Kim, D.J.; Ahn, H.J.; Lee, J.H.; Im, K.; Shaw, R.

2010-01-01

The International Thermanuclear Experimental Reactor (ITER) tokamak device is composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40 o sectors. Each VV/TFCs/VVTS 40 o sector is made up of one 40 o VV, two 20 o TFCs and associated VVTS segments. The 40 o sectors are sub-assembled at assembly hall respectively and then nine 40 o sectors sub-assembled at assembly hall are finally assembled at tokamak in-pit hall. The assembly strategy and tools for the 40 o sector sub-assembly and final assembly should be developed to satisfy the basic assembly requirements of the ITER tokamak device. Accordingly, the purpose-built assembly tools should be designed and manufactured considering assembly plan, available space, cost, safety, easy operation, efficient maintenance, and so on. The 40 o sector assembly tools are classified into 2 groups. One group is the sub-assembly tools including upending tool, lifting tool, sub-assembly tool, VV supports and bracing tools used at assembly hall and the other group is the in-pit assembly tools including lifting tool, central column, radial beams and their supports. This paper describes the current status of the assembly strategy and major tools for the VV/TFCs/VVTS 40 o sector assembly at in-pit hall and assembly hall. The conceptual design of the major assembly tools and assembly process at assembly hall and tokamak in-pit hall are presented also.

SERINGUE LOUIS JUBÉ POUR LA TRANSFUSION DU SANG PUR

Directory of Open Access Journals (Sweden)

Academia Nacional de Medicina

2011-01-01

Full Text Available

DENOMINACIÓN:  

Fabricante: Duffaud & Cie

Año: 1924

Medidas: 19,5 x 6 cm

Volumen: 5 cc

Materiales: Acero, vidrio y caucho 

Esta jeringa para transfusión de sangre fue diseñada en Paris por el médico francés, Louis Jubé. Fue desarrollada en 1923, aunque la publicación de la patente sólo se registra hasta el 1 de julio de 1924. 

Este sistema de transfusión de sangre fue el más utilizado en Europa durante la década de los años veinte. La jeringa está compuesta por un cilindro de vidrio y dispone de dos conexiones laterales que, por medio de agujas de diverso calibre, permitían la punción del donante y el receptor. La jeringa más utilizada fue de 5 cc. Para su uso, se debía punzar primero al receptor y una vez canalizada la vena se conectaba al donante. La sangre llenaba el émbolo y luego de varias aspiraciones se trasmitía la sangre al receptor a un ritmo de 5cc cada 3-4 segundos. Este tipo de jeringa podía llegar a permitir transfusiones de 200cc hasta 500cc en algunos casos. Sin embargo, a medida que pasaba el tiempo, la transfusión se dificultaba debido a la coagulación de la sangre y era necesario iniciar el proceso nuevamente. 

[Louis Vincelet, medical historian, chronicler of the work of de Maupassant, a Normand passionate about the sea and a dreamer of becoming a white clown].

Science.gov (United States)

Vincelet, Patrick

2015-01-01

Son, grandson, great grandson, grandnephew of a medical doctor on both sides, Louis Vincelet dreamt of becoming a white clown, and ultimately his medical uniform in the merchant navy was not so different, during his long career with the Transatlantic General Company up to the age of 55. The sea has been his great source of inspiration, even when he had settled in Paris, taking care of the "forts des halles" and of artists in the main Parisian circuses.

Fuel injection assembly for use in turbine engines and method of assembling same

Science.gov (United States)

Berry, Jonathan Dwight; Johnson, Thomas Edward; York, William David; Uhm, Jong Ho

2015-12-15

A fuel injection assembly for use in a turbine engine is provided. The fuel injection assembly includes an end cover, an endcap assembly, a fluid supply chamber, and a plurality of tube assemblies positioned at the endcap assembly. Each of the tube assemblies includes housing having a fuel plenum and a cooling fluid plenum. The cooling fluid plenum is positioned downstream from the fuel plenum and separated from the fuel plenum by an intermediate wall. The plurality of tube assemblies also include a plurality of tubes that extends through the housing. Each of the plurality of tubes is coupled in flow communication with the fluid supply chamber and a combustion chamber positioned downstream from the tube assembly. The plurality of tube assemblies further includes an aft plate at a downstream end of the cooling fluid plenum. The plate includes at least one aperture.

AutoAssemblyD: a graphical user interface system for several genome assemblers.

Science.gov (United States)

Veras, Adonney Allan de Oliveira; de Sá, Pablo Henrique Caracciolo Gomes; Azevedo, Vasco; Silva, Artur; Ramos, Rommel Thiago Jucá

2013-01-01

Next-generation sequencing technologies have increased the amount of biological data generated. Thus, bioinformatics has become important because new methods and algorithms are necessary to manipulate and process such data. However, certain challenges have emerged, such as genome assembly using short reads and high-throughput platforms. In this context, several algorithms have been developed, such as Velvet, Abyss, Euler-SR, Mira, Edna, Maq, SHRiMP, Newbler, ALLPATHS, Bowtie and BWA. However, most such assemblers do not have a graphical interface, which makes their use difficult for users without computing experience given the complexity of the assembler syntax. Thus, to make the operation of such assemblers accessible to users without a computing background, we developed AutoAssemblyD, which is a graphical tool for genome assembly submission and remote management by multiple assemblers through XML templates. AssemblyD is freely available at https://sourceforge.net/projects/autoassemblyd. It requires Sun jdk 6 or higher.

Xenophobic attacks on foreign shop owners and street vendors in Louis Trichardt Central Business District, Limpopo Province

Directory of Open Access Journals (Sweden)

Kholofelo Mothibi

2015-12-01

Full Text Available Xenophobic attacks in South Africa in 2008 and 2015 sent shockwaves through the country and the world. In these events, around 70 people were killed while thousands were displaced; and, property and products of street vendors and shop owners were destroyed. This phenomenological research project is confined to Louis Trichardt in Limpopo Province wherefrom a cohort of foreign street vendors and shop owners were interviewed. The lived experiences of being verbally and physically abused as well as of some acquaintances being killed, has clearly left them traumatised and living in fear. The article finds that contributory factors to xenophobic attacks experienced by foreign shop owners and street vendors range from competition over scarce resources, stereotypes and inter-group anxiety. Finally, it offers some recommendations about education for South Africans and measured police action.

Assembly, alignment and test of the Transiting Exoplanet Survey Satellite (TESS) optical assemblies

Science.gov (United States)

Balonek, Gregory; Brown, Joshua J.; Andre, James E.; Chesbrough, Christian D.; Chrisp, Michael P.; Dalpiaz, Michael; Lennon, Joseph; Richards, B. C.; Clark, Kristin E.

2017-08-01

The Transiting Exoplanet Survey Satellite (TESS) will carry four visible waveband, seven-element, refractive F/1.4 lenses, each with a 34 degree diagonal field of view. This paper describes the methods used for the assembly, alignment and test of the four flight optical assemblies. Prior to commencing the build of the four flight optical assemblies, a Risk Reduction Unit (RRU) was successfully assembled and tested [1]. The lessons learned from the RRU were applied to the build of the flight assemblies. The main modifications to the flight assemblies include the inking of the third lens element stray light mitigation, tighter alignment tolerances, and diamond turning for critical mechanical surfaces. Each of the optical assemblies was tested interferometrically and measured with a low coherence distance measuring interferometer (DMI) to predict the optimal shim thickness between the lens assembly and detector before -75°C environmental testing. In addition to individual test data, environmental test results from prior assemblies allow for the exploration of marginal performance differences between each of the optical assemblies.

SWAP-Assembler: scalable and efficient genome assembly towards thousands of cores.

Science.gov (United States)

Meng, Jintao; Wang, Bingqiang; Wei, Yanjie; Feng, Shengzhong; Balaji, Pavan

2014-01-01

There is a widening gap between the throughput of massive parallel sequencing machines and the ability to analyze these sequencing data. Traditional assembly methods requiring long execution time and large amount of memory on a single workstation limit their use on these massive data. This paper presents a highly scalable assembler named as SWAP-Assembler for processing massive sequencing data using thousands of cores, where SWAP is an acronym for Small World Asynchronous Parallel model. In the paper, a mathematical description of multi-step bi-directed graph (MSG) is provided to resolve the computational interdependence on merging edges, and a highly scalable computational framework for SWAP is developed to automatically preform the parallel computation of all operations. Graph cleaning and contig extension are also included for generating contigs with high quality. Experimental results show that SWAP-Assembler scales up to 2048 cores on Yanhuang dataset using only 26 minutes, which is better than several other parallel assemblers, such as ABySS, Ray, and PASHA. Results also show that SWAP-Assembler can generate high quality contigs with good N50 size and low error rate, especially it generated the longest N50 contig sizes for Fish and Yanhuang datasets. In this paper, we presented a highly scalable and efficient genome assembly software, SWAP-Assembler. Compared with several other assemblers, it showed very good performance in terms of scalability and contig quality. This software is available at: https://sourceforge.net/projects/swapassembler.

Assembly tool design

International Nuclear Information System (INIS)

Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

1996-06-01

The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

Drive piston assembly for a valve actuator assembly

Science.gov (United States)

Sun, Zongxuan

2010-02-23

A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

Outcomes, Approaches, and Challenges to Developing and Passing a Countywide Mandatory Vaccination Policy: St. Louis County's Experience with Hepatitis A Vaccine for Food Service Personnel.

Science.gov (United States)

Rebmann, Terri; Wilson, Kristin D; Loux, Travis; Iqbal, Ayesha Z; Peters, Eleanor B; Peavler, Olivia

2016-01-01

In the early 1990s, St. Louis County had multiple foodservice worker-related hepatitis A outbreaks uncontrolled by standard outbreak interventions. Restaurant interest groups and the general public applied political pressure to local public health officials for more stringent interventions, including a mandatory vaccination policy. Local health departments can enact mandatory vaccination policies, but this has rarely been done. The study objectives were to describe the approach used to pass a mandatory vaccination policy at the local jurisdiction level and illustrate the outcome from this ordinance 15 years later. A case study design was used. In-depth, semi-structured interviews using guided questions were conducted in spring, 2015, with six key informants who had direct knowledge of the mandatory vaccination policy process. Meeting minutes and/or reports were also analyzed. A Poisson distribution analysis was used to calculate the rate of outbreaks before and after mandatory vaccination policy implementation. The policy appears to have reduced the number of hepatitis A outbreaks, lowering the morbidity and economic burden in St. Louis County. The lessons learned by local public health officials in passing a mandatory hepatitis A vaccination policy are important and relevant in today's environment. The experience and lessons learned may assist other local health departments when faced with the potential need for mandatory policies for any vaccine preventable disease.

77 FR 43354 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Science.gov (United States)

2012-07-24

...., Joplin, 12000473 St. Louis County North Taylor Avenue Historic District, (Kirkwood MPS) Roughly bounded by Manchester Rd., E. Adams, & N. Taylor Aves., Kirkwood, 12000474 NEW YORK Erie County American..., 12000482 OREGON Coos County Marshfield I.O.O.F. Cemetery, 750 Ingersoll Rd., Coos Bay, 12000483 Morrow...

Test Area North Pool Stabilization Project: Environmental assessment

International Nuclear Information System (INIS)

1996-05-01

The Test Area North (TAN) Pool is located within the fenced TAN facility boundaries on the Idaho National Engineering Laboratory (INEL). The TAN pool stores 344 canisters of core debris from the March, 1979, Three Mile Island (TMI) Unit 2 reactor accident; fuel assemblies from Loss-of-Fluid Tests (LOFT); and Government-owned commercial fuel rods and assemblies. The LOFT and government owned commercial fuel rods and assemblies are hereafter referred to collectively as open-quotes commercial fuelsclose quotes except where distinction between the two is important to the analysis. DOE proposes to remove the canisters of TMI core debris and commercial fuels from the TAN Pool and transfer them to the Idaho Chemical Processing Plant (ICPP) for interim dry storage until an alternate storage location other than at the INEL, or a permanent federal spent nuclear fuel (SNF) repository is available. The TAN Pool would be drained and placed in an industrially and radiologically safe condition for refurbishment or eventual decommissioning. This environmental assessment (EA) identifies and evaluates environmental impacts associated with (1) constructing an Interim Storage System (ISS) at ICPP; (2) removing the TMI and commercial fuels from the pool and transporting them to ICPP for placement in an ISS, and (3) draining and stabilizing the TAN Pool. Miscellaneous hardware would be removed and decontaminated or disposed of in the INEL Radioactive Waste Management Complex (RWMC). This EA also describes the environmental consequences of the no action alternative

Self-assembled nanostructures

CERN Document Server

Zhang, Jin Z; Liu, Jun; Chen, Shaowei; Liu, Gang-yu

2003-01-01

Nanostructures refer to materials that have relevant dimensions on the nanometer length scales and reside in the mesoscopic regime between isolated atoms and molecules in bulk matter. These materials have unique physical properties that are distinctly different from bulk materials. Self-Assembled Nanostructures provides systematic coverage of basic nanomaterials science including materials assembly and synthesis, characterization, and application. Suitable for both beginners and experts, it balances the chemistry aspects of nanomaterials with physical principles. It also highlights nanomaterial-based architectures including assembled or self-assembled systems. Filled with in-depth discussion of important applications of nano-architectures as well as potential applications ranging from physical to chemical and biological systems, Self-Assembled Nanostructures is the essential reference or text for scientists involved with nanostructures.

Predictors of Size for Gestational Age in St. Louis City and County

Directory of Open Access Journals (Sweden)

Pamela K. Xaverius

2014-01-01

Full Text Available Objective. To identify social, behavioral, and physiological risk factors associated with small for gestational age (SGA by gestational age category in St. Louis City and County. Methods. A retrospective cohort study was conducted using birth certificate and fetal death records from 2000 to 2009 (n = 142,017. Adjusted associations of risk factors with SGA were explored using bivariate logistic regression. Four separate multivariable logistic regression analyses, stratified by gestational age, were conducted to estimate adjusted odds ratios. Results. Preeclampsia and inadequate weight gain contributed significantly to increased odds for SGA across all gestational age categories. The point estimates ranged from a 3.41 increased odds among women with preeclampsia and 1.76 for women with inadequate weight gain at 24–28 weeks’ gestational age to 2.19 and 2.11 for full-term infants, respectively. Among full-term infants, smoking (aOR = 2.08, chronic hypertension (aOR = 1.46, and inadequate prenatal care (aOR = 1.25 had the next most robust and significant impact on SGA. Conclusion. Preeclampsia and inadequate weight gain are significant risk factors for SGA, regardless of gestational age. Education on the importance of nutrition and adequate weight gain during pregnancy is vital. In this community, disparities in SGA and smoking rates are important considerations for interventions designed to improve birth outcomes.

SAINT LOUIS ENCEPHALITIS VIRUS IN MATO GROSSO, CENTRAL-WESTERN BRAZIL.

Science.gov (United States)

Heinen, Letícia Borges da Silva; Zuchi, Nayara; Serra, Otacília Pereira; Cardoso, Belgath Fernandes; Gondim, Breno Herman Ferreira; Dos Santos, Marcelo Adriano Mendes; Souto, Francisco José Dutra; Paula, Daphine Ariadne Jesus de; Dutra, Valéria; Dezengrini-Slhessarenko, Renata

2015-01-01

The dengue virus (DENV), which is frequently involved in large epidemics, and the yellow fever virus (YFV), which is responsible for sporadic sylvatic outbreaks, are considered the most important flaviviruses circulating in Brazil. Because of that, laboratorial diagnosis of acute undifferentiated febrile illness during epidemic periods is frequently directed towards these viruses, which may eventually hinder the detection of other circulating flaviviruses, including the Saint Louis encephalitis virus (SLEV), which is widely dispersed across the Americas. The aim of this study was to conduct a molecular investigation of 11 flaviviruses using 604 serum samples obtained from patients during a large dengue fever outbreak in the state of Mato Grosso (MT) between 2011 and 2012. Simultaneously, 3,433 female Culex spp. collected with Nasci aspirators in the city of Cuiabá, MT, in 2013, and allocated to 409 pools containing 1-10 mosquitoes, were also tested by multiplex semi-nested reverse transcription PCR for the same flaviviruses. SLEV was detected in three patients co-infected with DENV-4 from the cities of Cuiabá and Várzea Grande. One of them was a triple co-infection with DENV-1. None of them mentioned recent travel or access to sylvatic/rural regions, indicating that transmission might have occurred within the metropolitan area. Regarding mosquito samples, one pool containing one Culex quinquefasciatus female was positive for SLEV, with a minimum infection rate (MIR) of 0.29 per 1000 specimens of this species. Phylogenetic analysis indicates both human and mosquito SLEV cluster, with isolates from genotype V-A obtained from animals in the Amazon region, in the state of Pará. This is the first report of SLEV molecular identification in MT.

Finestre e finestrini: sguardi plurimi e incrociati sul “pays-temps” di Louis-Philippe Dalembert

Directory of Open Access Journals (Sweden)

Emanuela Cacchioli

2015-01-01

Full Text Available The article focuses on the presence and the absence of windows, and specifically windows with shutters, car windows and rear-view mirrors in the novels by Haitian writer Louis-Philippe Dalembert. In his work, we can identify three tendencies. First of all, windows with shutters allow the passage from childhood to adulthood. Secondly, the absence of openings projects the character in heterotopias, which cause a language breakdown. Thirdly, the use of literary windows is linked with vagabondage and pays-temps. An image of the landscape is selected through a frame and we have the perception of a fragmentary vision. According to Dalembert, this world vision becomes a narrative element and a creative technique. This partial image which emerges from the symbolic space of the window allows us to talk about the childhood of the narrator from different perspectives: we can identify a geographical and temporal landscape (pays-temps thanks to a reflection on the surface of the window and the possibility of remembering and imaging the past. Fiction is able to complete omissions, gaps, lapses.

Application of the vector modulation method to the north finder capability gyroscope as a directional sensor

International Nuclear Information System (INIS)

Celikel, Oguz

2011-01-01

This paper presents the application of the vector modulation method (VMM) to an open-loop interferometric fiber optic gyroscope, called the north finder capability gyroscope (NFCG), designed and assembled in TUBITAK UME (National Metrology Institute of Turkey). The method contains a secondary modulation/demodulation circuit with an AD630 chip, depending on the periodic variation of the orientation of the sensing coil sensitive surface vector with respect to geographic north at a laboratory latitude and collection of dc voltage at the secondary demodulation circuit output in the time domain. The resultant dc voltage proportional to the first-kind Bessel function based on Sagnac phase shift for the first order is obtained as a result of vector modulation together with the Earth's rotation. A new model function is developed and introduced to evaluate the angular errors of the NFCG with VMM in finding geographic north

Newnes electronics assembly handbook

CERN Document Server

Brindley, Keith

2013-01-01

Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

Obituary: John Louis Perdrix, 1926-2005

Science.gov (United States)

Orchiston, D. Wayne

2006-12-01

John Perdrix, astronomical historian and co-founder of the Journal of Astronomical History and Heritage, died on 27 June 2005. John Louis Perdrix was born in Adelaide, Australia, on 30 June 1926. After studying chemistry at Melbourne Technical College and working in industry, he joined the Commonwealth Scientific and Industrial Research Organisation's Division of Minerals and Geochemistry. In 1974 the Division relocated to the Western Australian capital, Perth, and John spent the rest of his working life there involved in geochemical research. From his teenage years John had a passion for astronomy, which he fine-tuned through the Astronomical Society of Victoria and the Victorian Branch of the British Astronomical Association. He was very active in both groups, serving as President of the former and Secretary/Treasurer of the latter. He was also an FRAS, and a member of the AAS, the BAA parent body, and the IAU (Commission 41)?no mean feat for an Australian amateur astronomer. Throughout his life, he was a strong advocate of close amateur-professional relations. John's main research interest was history of astronomy, and over the years he wrote a succession of research papers, mainly about aspects of Australian astronomy. His well-researched and neatly-illustrated papers on the Melbourne Observatory and the Great Melbourne Telescope are classics, and when the Observatory's future was in the balance they played a key role in the State Government's decision to convert this unique facility into a museum precinct. To support his research activities, John built up an amazing library that developed its own distinctive personality and quickly took over his house and garage before invading commercial storage facilities! Apart from writing papers, John had an even greater passion for editing and publishing. From 1985 to 1997 he produced the Australian Journal of Astronomy, and in 1998 this was replaced by the Journal of Astronomical History and Heritage (JAH2). Both

Seroconversion for west Nile and St. Louis encephalitis viruses among sentinel horses in Colombia

Directory of Open Access Journals (Sweden)

Salim Mattar

2011-12-01

Full Text Available We prospectively sampled flavivirus-naïve horses in northern Colombia to detect West Nile virus (WNV and St. Louis encephalitis virus (SLEV seroconversion events, which would indicate the current circulation of these viruses. Overall, 331 (34.1% of the 971 horses screened were positive for past infection with flaviviruses upon initial sampling in July 2006. During the 12-month study from July 2006-June 2007, 33 WNV seroconversions and 14 SLEV seroconversions were detected, most of which occurred in the department of Bolivar. The seroconversion rates of horses in Bolivar for the period of March-June 2007 reached 12.4% for WNV and 6.7% for SLEV. These results comprise the first serologic evidence of SLEV circulation in Colombia. None of the horses sampled developed symptoms of encephalitis within three years of initial sampling. Using seroconversions in sentinel horses, we demonstrated an active circulation of WNV and SLEV in northern Colombia, particularly in the department of Bolivar. The absence of WNV-attributed equine or human disease in Colombia and elsewhere in the Caribbean Basin remains a topic of debate and speculation.

Target population involvement in urban ciclovias: a preliminary evaluation of St. Louis open streets.

Science.gov (United States)

Hipp, J Aaron; Eyler, Amy A; Kuhlberg, Jill A

2013-12-01

Ciclovias are active street events when roads are open to walkers, cyclists, and families and closed to automobiles. Over 70 cities in the USA have implemented ciclovias to promote physical activity. The authors evaluated four events during 2010 to determine what activities participants perform and who is attending. For two ciclovia events in St. Louis, Missouri, observation reports of activities, gender, and age of 1,452 participants were collected, and 82 adults were interviewed via direct approach. The survey covered six domains: physical activity, travel to event, sense of community, marketing, economic impact, and demographics. Each event occurred within the city, along multiple streets. Domains were selected from Ciclovia Recreativa developed by Ciclovia Bogota, Pan American Health Organization, and CDC. Additional questions addressed city-specific goals and matched similar evaluations in other cities. Over 50 % of participants met CDC-defined weekly minute thresholds for physical activity. Participants, primarily (>80 %) middle class, college educated, and white, were not representative of the majority minority city population, which has high rates of poverty, and low percentage of college graduates. Cities must work with residents to increase low-income minority population participation in ciclovia-based physical activity.

Outcomes, Approaches, and Challenges to Developing and Passing a Countywide Mandatory Vaccination Policy: St. Louis County’s Experience with Hepatitis A Vaccine for Food Service Personnel

Directory of Open Access Journals (Sweden)

Kristin D. Wilson

2016-03-01

Full Text Available In the early 1990s, St. Louis County had multiple foodservice worker-related hepatitis A outbreaks uncontrolled by standard outbreak interventions. Restaurant interest groups and the general public applied political pressure to local public health officials for more stringent interventions, including a mandatory vaccination policy. Local health departments can enact mandatory vaccination policies, but this has rarely been done. The study objectives were to describe the approach used to pass a mandatory vaccination policy at the local jurisdiction level and illustrate the outcome from this ordinance 15 years later. A case study design was used. In-depth, semi-structured interviews using guided questions were conducted in spring, 2015, with six key informants who had direct knowledge of the mandatory vaccination policy process. Meeting minutes and/or reports were also analyzed. A Poisson distribution analysis was used to calculate the rate of outbreaks before and after mandatory vaccination policy implementation. The policy appears to have reduced the number of hepatitis A outbreaks, lowering the morbidity and economic burden in St. Louis County. The lessons learned by local public health officials in passing a mandatory hepatitis A vaccination policy are important and relevant in today’s environment. The experience and lessons learned may assist other local health departments when faced with the potential need for mandatory policies for any vaccine preventable disease.

Fuel Assembly Damping Summary

Energy Technology Data Exchange (ETDEWEB)

Lee, Kanghee; Kang, Heungseok; Oh, Dongseok; Yoon, Kyungho; Kim, Hyungkyu; Kim, Jaeyong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

This paper summary the fuel assembly damping data in air/in still water/under flow, released from foreign fuel vendors, compared our data with the published data. Some technical issues in fuel assembly damping measurement testing are also briefly discussed. Understanding of each fuel assembly damping mechanisms according to the surrounding medium and flow velocity can support the fuel design improvement in fuel assembly dynamics and structural integrity aspect. Because the upgraded requirements of the newly-developed advanced reactor system will demands to minimize fuel design margin in integrity evaluation, reduction in conservatism of fuel assembly damping can contribute to alleviate the fuel design margin for sure. Damping is an energy dissipation mechanism in a vibrating mechanical structure and prevents a resonant structure from having infinite vibration amplitudes. The sources of fuel assembly damping are various from support friction to flow contribution, and it can be increased by the viscosity or drag of surrounding fluid medium or the average velocity of water flowing. Fuel licensing requires fuel design evaluation in transient or accidental condition. Dynamic response analysis of fuel assembly is to show fuel integrity and requires information on assembly-wise damping in dry condition and under wet or water flowing condition. However, damping measurement test for the full-scale fuel assembly prototype is not easy to carry out because of the scale (fuel prototype, test facility), unsteadiness of test data (scattering, random sampling and processing), instrumentation under water flowing (water-proof response measurement), and noise. LWR fuel technology division in KAERI is preparing the infra structure for damping measurement test of full-scale fuel assembly, to support fuel industries and related research activities. Here is a preliminary summary of fuel assembly damping, published in the literature. Some technical issues in fuel assembly damping

Environmental and biological factors influencing Culex pipiens quinquefasciatus Say (Diptera: Culicidae) vector competence for Saint Louis encephalitis virus.

Science.gov (United States)

Richards, Stephanie L; Lord, Cynthia C; Pesko, Kendra; Tabachnick, Walter J

2009-08-01

Complex interactions between environmental and biological factors influence the susceptibility of Culex pipiens quinquefasciatus to St. Louis encephalitis virus and could affect the epidemiology of virus transmission. Similar interactions could have epidemiologic implications for other vector-virus systems. We conducted an experiment to examine four such factors in combination: mosquito age, extrinsic incubation temperature (EIT), virus dose, and colony. The proportion of mosquitoes with body infections or disseminated infections varied between colonies, and was dependant on age, EIT, and dose. We also show that the probability of a body or leg infection interacted in complex ways between colonies, ages, EITs, and doses. The complex interactive effects of environmental and biological factors must be taken into account for studies of vector competence and epidemiology, especially when laboratory studies are used to generalize to natural transmission dynamics where the extent of variation is largely unknown.

Fuel assembly

International Nuclear Information System (INIS)

Abe, Hideaki; Sakai, Takao; Ishida, Tomio; Yokota, Norikatsu.

1992-01-01

The lower ends of a plurality of plate-like shape memory alloys are secured at the periphery of the upper inside of the handling head of a fuel assembly. As the shape memory alloy, a Cu-Zn alloy, a Ti-Pd alloy or a Fe-Ni alloy is used. When high temperature coolants flow out to the handling head, the shape memory alloy deforms by warping to the outer side more greatly toward the upper portion thereof with the temperature increase of the coolants. As the result, the shape of the flow channel of the coolants is changed so as to enlarge at the exit of the upper end of the fuel assembly. Then, the pressure loss of the coolants in the fuel assembly is decreased by the enlargement. Accordingly, the flow rate of the coolants in the fuel assembly is increased to lower the temperature of the coolants. Further, high temperature coolants and low temperature coolants are mixed sufficiently just above the fuel assembly. This can suppress the temperature fluctuation of the mixed coolants in the upper portion of the reactor core, thereby enabling to decrease a fatigue and failures of the structural components in the upper portion of the reactor core. (I.N.)

Soldering in electronics assembly

CERN Document Server

Judd, Mike

2013-01-01

Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

Multivalent protein assembly using monovalent self-assembling building blocks

NARCIS (Netherlands)

Petkau - Milroy, K.; Sonntag, M.H.; Colditz, A.; Brunsveld, L.

2013-01-01

Discotic molecules, which self-assemble in water into columnar supramolecular polymers, emerged as an alternative platform for the organization of proteins. Here, a monovalent discotic decorated with one single biotin was synthesized to study the self-assembling multivalency of this system in regard

Bearing assemblies, apparatuses, and motor assemblies using the same

Science.gov (United States)

Sexton, Timothy N.; Cooley, Craig H.; Knuteson, Cody W.

2015-12-29

Various embodiments of the invention relate to bearing assemblies, apparatuses and motor assemblies that include geometric features configured to impart a selected amount of heat transfer and/or hydrodynamic film formation. In an embodiment, a bearing assembly may include a plurality of superhard bearing pads distributed circumferentially about an axis. At least some of the plurality of superhard bearing pads may include a plurality of sub-superhard bearing elements defining a bearing surface. At least some of the plurality of sub-superhard bearing elements may be spaced from one another by one or more voids to impart a selected amount of heat transfer and hydrodynamic film formation thereon during operation. The bearing assembly may also include a support ring that carries the plurality of superhard bearing pads. In addition, at least a portion of the sub-superhard bearing elements may extend beyond the support ring.

Magmatism at different crustal levels in the ancient North Cascades magmatic arc

Science.gov (United States)

Shea, E. K.; Bowring, S. A.; Miller, R. B.; Miller, J. S.

2013-12-01

The mechanisms of magma ascent and emplacement inferred from study of intrusive complexes have long been the subject of intense debate. Current models favor incremental construction based on integration of field, geochemical, geochronologic, and modeling studies. Much of this work has been focused on a single crustal level. However, study of magmatism throughout the crust is critical for understanding how magma ascends through and intrudes surrounding crustal material. Here, we present new geochronologic and geochemical work from intrusive complexes emplaced at a range of crustal depths in the Cretaceous North Cascades magmatic arc. These complexes were intruded between 92 and 87 Ma at depths of at ≤5 -10 km, ~20 km, and ~25 km during this time. U-Pb CA-TIMS geochronology in zircon can resolve Jack-Entiat intrusive complex, a highly elongate amalgamation of intrusions recording two episodes of magmatism between~92-88 Ma and ~80-77 Ma. Each of these complexes provides a window into crustal processes that occur at different depths. Our data suggest assembly of the Black Peak intrusive complex occurred via a series of small (0.5-2 km2) magmatic increments from ~92 Ma to ~87 Ma. Field relations and zircon trace element geochemistry indicate each of these increments were emplaced and crystallized as closed systems-we find no evidence for mixing between magmas in the complex. However, zircon inheritance becomes more common in younger intrusions, indicating assimilation of older plutonic material, possibly during magma production or transport. The Seven-Fingered Jack intrusive complex, emplaced around 15-20 km, preserves a much more discontinuous record of intrusion than the Black Peak. Our data indicate major magmatism in the complex occurred between ~92.1-91.1 Ma. Inheritance in the Seven-Fingered Jack is common, particularly along contacts between intrusions. The Tenpeak intrusive complex, assembled between ~92 Ma and 89 Ma, represents one of the deepest exhumed

Fuel assembly

International Nuclear Information System (INIS)

Gjertsen, R.K.; Bassler, E.A.; Huckestein, E.A.; Salton, R.B.; Tower, S.N.

1988-01-01

A fuel assembly adapted for use with a pressurized water nuclear reactor having capabilities for fluid moderator spectral shift control is described comprising: parallel arranged elongated nuclear fuel elements; means for providing for axial support of the fuel elements and for arranging the fuel elements in a spaced array; thimbles interspersed among the fuel elements adapted for insertion of a rod control cluster therewithin; means for structurally joining the fuel elements and the guide thimbles; fluid moderator control means for providing a volume of low neutron absorbing fluid within the fuel assembly and for removing a substantially equivalent volume of reactor coolant water therefrom, a first flow manifold at one end of the fuel assembly sealingly connected to a first end of the moderator control tubes whereby the first ends are commonly flow connected; and a second flow manifold, having an inlet passage and an outlet passage therein, sealingly connected to a second end of the moderator control tubes at a second end of the fuel assembly

Self assembly of organic nanostructures and dielectrophoretic assembly of inorganic nanowires.

Science.gov (United States)

Dholakia, Geetha; Kuo, Steven; Allen, E. L.

2007-03-01

Self assembly techniques enable the organization of organic molecules into nanostructures. Currently engineering strategies for efficient assembly and routine integration of inorganic nanoscale objects into functional devices is very limited. AC Dielectrophoresis is an efficient technique to manipulate inorganic nanomaterials into higher dimensional structures. We used an alumina template based sol-gel synthesis method for the growth of various metal oxide nanowires with typical diameters of 100-150 nm, ranging in length from 3-10 μm. Here we report the dielectrophoretic assembly of TiO2 nanowires, an important material for photocatalysis and photovoltaics, onto interdigitated devices. Self assembly in organic nanostructures and its dependence on structure and stereochemistry of the molecule and dielectrophoretic field dependence in the assembly of inorganic nanowires will be compared and contrasted. Tunneling spectroscopy and DOS of these nanoscale systems will also be discussed.

Formes, fonctions et catégories linguistiques: Les principes de grammaire générale de Louis Hjelmslev

Directory of Open Access Journals (Sweden)

Pierre Swiggers

2005-12-01

Full Text Available Quand, en 1928, Louis Hjelmslev publie ses Principes de grammaire générale, il s'inscrit dans un vaste processus d'élaboration d'une linguistique generale, qui per­ met de rattacher ces prémices d'une ceuvre qu'on associe aujourd'hui avec une école structuraliste spécifique - la glossématique -, aux travaux fondateurs de Saussure, de Jespersen, de Sapir. On pourrait parler de "insertion dans l'histoire des théories linguistiques", car, comme Saussure, Hjelmslev a senti la nécessité de for­ muler, pour la premiere fois, une theorie cohérente du langage et de repartir de zéro, tout en acceptant les acquis "matériels" du passé.

Fire resistant PV shingle assembly

Science.gov (United States)

Lenox, Carl J.

2012-10-02

A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

Nuclear reactor fuel assembly

International Nuclear Information System (INIS)

Marmonier, Pierre; Mesnage, Bernard; Nervi, J.C.

1975-01-01

This invention refers to fuel assemblies for a liquid metal cooled fast neutron reactor. Each assembly is composed of a hollow vertical casing, of regular polygonal section, containing a bundle of clad pins filled with a fissile or fertile substance. The casing is open at its upper end and has a cylindrical foot at its lower end for positioning the assembly in a housing provided in the horizontal diagrid, on which the core assembly rests. A set of flat bars located on the external surface of the casing enables it to be correctly orientated in its housing among the other core assemblies [fr

SAINT LOUIS ENCEPHALITIS VIRUS IN MATO GROSSO, CENTRAL-WESTERN BRAZIL

Directory of Open Access Journals (Sweden)

Letícia Borges da Silva HEINEN

2015-06-01

Full Text Available The dengue virus (DENV, which is frequently involved in large epidemics, and the yellow fever virus (YFV, which is responsible for sporadic sylvatic outbreaks, are considered the most important flaviviruses circulating in Brazil. Because of that, laboratorial diagnosis of acute undifferentiated febrile illness during epidemic periods is frequently directed towards these viruses, which may eventually hinder the detection of other circulating flaviviruses, including the Saint Louis encephalitis virus (SLEV, which is widely dispersed across the Americas. The aim of this study was to conduct a molecular investigation of 11 flaviviruses using 604 serum samples obtained from patients during a large dengue fever outbreak in the state of Mato Grosso (MT between 2011 and 2012. Simultaneously, 3,433 female Culex spp. collected with Nasci aspirators in the city of Cuiabá, MT, in 2013, and allocated to 409 pools containing 1-10 mosquitoes, were also tested by multiplex semi-nested reverse transcription PCR for the same flaviviruses. SLEV was detected in three patients co-infected with DENV-4 from the cities of Cuiabá and Várzea Grande. One of them was a triple co-infection with DENV-1. None of them mentioned recent travel or access to sylvatic/rural regions, indicating that transmission might have occurred within the metropolitan area. Regarding mosquito samples, one pool containing one Culex quinquefasciatus female was positive for SLEV, with a minimum infection rate (MIR of 0.29 per 1000 specimens of this species. Phylogenetic analysis indicates both human and mosquito SLEV cluster, with isolates from genotype V-A obtained from animals in the Amazon region, in the state of Pará. This is the first report of SLEV molecular identification in MT.

Self assembly of rectangular shapes on concentration programming and probabilistic tile assembly models.

Science.gov (United States)

Kundeti, Vamsi; Rajasekaran, Sanguthevar

2012-06-01

Efficient tile sets for self assembling rectilinear shapes is of critical importance in algorithmic self assembly. A lower bound on the tile complexity of any deterministic self assembly system for an n × n square is [Formula: see text] (inferred from the Kolmogrov complexity). Deterministic self assembly systems with an optimal tile complexity have been designed for squares and related shapes in the past. However designing [Formula: see text] unique tiles specific to a shape is still an intensive task in the laboratory. On the other hand copies of a tile can be made rapidly using PCR (polymerase chain reaction) experiments. This led to the study of self assembly on tile concentration programming models. We present two major results in this paper on the concentration programming model. First we show how to self assemble rectangles with a fixed aspect ratio ( α:β ), with high probability, using Θ( α + β ) tiles. This result is much stronger than the existing results by Kao et al. (Randomized self-assembly for approximate shapes, LNCS, vol 5125. Springer, Heidelberg, 2008) and Doty (Randomized self-assembly for exact shapes. In: proceedings of the 50th annual IEEE symposium on foundations of computer science (FOCS), IEEE, Atlanta. pp 85-94, 2009)-which can only self assembly squares and rely on tiles which perform binary arithmetic. On the other hand, our result is based on a technique called staircase sampling . This technique eliminates the need for sub-tiles which perform binary arithmetic, reduces the constant in the asymptotic bound, and eliminates the need for approximate frames (Kao et al. Randomized self-assembly for approximate shapes, LNCS, vol 5125. Springer, Heidelberg, 2008). Our second result applies staircase sampling on the equimolar concentration programming model (The tile complexity of linear assemblies. In: proceedings of the 36th international colloquium automata, languages and programming: Part I on ICALP '09, Springer-Verlag, pp 235

Assembling large, complex environmental metagenomes

Energy Technology Data Exchange (ETDEWEB)

Howe, A. C. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Jansson, J. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Earth Sciences Division; Malfatti, S. A. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tringe, S. G. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tiedje, J. M. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Brown, C. T. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Computer Science and Engineering

2012-12-28

The large volumes of sequencing data required to sample complex environments deeply pose new challenges to sequence analysis approaches. De novo metagenomic assembly effectively reduces the total amount of data to be analyzed but requires significant computational resources. We apply two pre-assembly filtering approaches, digital normalization and partitioning, to make large metagenome assemblies more computationaly tractable. Using a human gut mock community dataset, we demonstrate that these methods result in assemblies nearly identical to assemblies from unprocessed data. We then assemble two large soil metagenomes from matched Iowa corn and native prairie soils. The predicted functional content and phylogenetic origin of the assembled contigs indicate significant taxonomic differences despite similar function. The assembly strategies presented are generic and can be extended to any metagenome; full source code is freely available under a BSD license.

[Louis-Marie Rousseau and the "Chocolat rationnel des pharmaciens français" (Rational Chocolate of French pharmacists)].

Science.gov (United States)

Raynal, Cécile

2015-03-01

In 1883, the chemist Louis-Marie Rousseau (1849-1930) creats the "Compagnie hygiénique française" (French Hygienic Company). The company manufactures and sells the "Poudre de viande Rousseau" (Rousseau meat powder) and the "Chocolat Rousseau" (Rousseau Chocolate) by methods developed and patented by the pharmacist. Ten years after a successful collaboration, L.-M. Rousseau separates from his associates and founds the "Chocolaterie spéciale d'Ermont" (Special Chocolate factory of Ermont) in the village of Ermont near Paris. Here is manufactured the "Chocolat Rationnel des pharmaciens français" (Rational Chocolate of French pharmacists), hygienic chocolate sold only in pharmacies. The factory is also a pharmaceutical laboratory where is extracted theobromine from waste vegetable substances of cocoa. It then produces the "Théobromine Rousseau cristallisée" (crystallized Rousseau's Theobromine) sold as tablets, then the "Théosol" that will be commercialized until the middle of 1930s.

De novo assembly of a transcriptome for Calanus finmarchicus (Crustacea, Copepoda--the dominant zooplankter of the North Atlantic Ocean.

Directory of Open Access Journals (Sweden)

Petra H Lenz

Full Text Available Assessing the impact of global warming on the food web of the North Atlantic will require difficult-to-obtain physiological data on a key copepod crustacean, Calanus finmarchicus. The de novo transcriptome presented here represents a new resource for acquiring such data. It was produced from multiplexed gene libraries using RNA collected from six developmental stages: embryo, early nauplius (NI-II, late nauplius (NV-VI, early copepodite (CI-II, late copepodite (CV and adult (CVI female. Over 400,000,000 paired-end reads (100 base-pairs long were sequenced on an Illumina instrument, and assembled into 206,041 contigs using Trinity software. Coverage was estimated to be at least 65%. A reference transcriptome comprising 96,090 unique components ("comps" was annotated using Blast2GO. 40% of the comps had significant blast hits. 11% of the comps were successfully annotated with gene ontology (GO terms. Expression of many comps was found to be near zero in one or more developmental stages suggesting that 35 to 48% of the transcriptome is "silent" at any given life stage. Transcripts involved in lipid biosynthesis pathways, critical for the C. finmarchicus life cycle, were identified and their expression pattern during development was examined. Relative expression of three transcripts suggests wax ester biosynthesis in late copepodites, but triacylglyceride biosynthesis in adult females. Two of these transcripts may be involved in the preparatory phase of diapause. A key environmental challenge for C. finmarchicus is the seasonal exposure to the dinoflagellate Alexandrium fundyense with high concentrations of saxitoxins, neurotoxins that block voltage-gated sodium channels. Multiple contigs encoding putative voltage-gated sodium channels were identified. They appeared to be the result of both alternate splicing and gene duplication. This is the first report of multiple NaV1 genes in a protostome. These data provide new insights into the transcriptome

Nuclear fuel string assembly

International Nuclear Information System (INIS)

Ip, A.K.; Koyanagi, K.; Tarasuk, W.R.

1976-01-01

A method of fabricating rodded fuels suitable for use in pressure tube type reactors and in pressure vessel type reactors is described. Fuel rods are secured as an inner and an outer sub-assembly, each rod attached between mounting rings secured to the rod ends. The two sub-assemblies are telescoped together and positioned by spaced thimbles located between them to provide precise positioning while permittng differential axial movement between the sub-assemblies. Such sub-assemblies are particularly suited for mounting as bundle strings. The method provides particular advantages in the assembly of annular-section fuel pins, which includes booster fuel containing enriched fuel material. (LL)

Fuel assembly reconstitution

International Nuclear Information System (INIS)

Morgado, Mario M.; Oliveira, Monica G.N.; Ferreira Junior, Decio B.M.; Santos, Barbara O. dos; Santos, Jorge E. dos

2009-01-01

Fuel failures have been happened in Nuclear Power Plants worldwide, without lost of integrity and safety, mainly for the public, environment and power plants workers. The most common causes of these events are corrosion (CRUD), fretting and pellet cladding interaction. These failures are identified by increasing the activity of fission products, verified by chemical analyses of reactor coolant. Through these analyses, during the fourth operation cycle of Angra 2 Nuclear Power Plant, was possible to observe fuel failure indication. This indication was confirmed in the end of the cycle during the unloading of reactor core through leakage tests of fuel assembly, using the equipment called 'In Mast Sipping' and 'Box Sipping'. After confirmed, the fuel assembly reconstitution was scheduled, and happened in April, 2007, where was identified the cause and the fuel rod failure, which was substitute by dummy rods (zircaloy). The cause was fretting by 'debris'. The actions to avoid and prevent fuel assemblies failures are important. The goals of this work are to describe the methodology of fuel assembly reconstitution using the FARE (Fuel Assembly Reconstitution Equipment) system, to describe the results of this task in economic and security factors of the company and show how the fuel assembly failures are identified during operation and during the outage. (author)

Analysis of GRI North American Regional Gas Supply-Demand Model

International Nuclear Information System (INIS)

Nesbitt, D.M.; Singh, J.; Pine, G.D.; Kline, D.; Barron, M.; Cheung, P.D.

1989-01-01

This paper summarizes the results from the GRI North American Regional Gas Supply-Demand Model using the four scenarios defined for the Energy Modeling Forum Number 9 (EMF-9) described in EMF-9 Working Paper 9.4 (1987). The analysis is designed both to showcase the GRI North American Regional model as well as to infer meaningful results about the North American natural gas system. The focus of the analysis is not R ampersand D per se; R ampersand D analysis using the model is conducted regularly by GRI and described elsewhere. Rather, the objective is to analyze some of the major uncertainties in the North American gas market, uncertainties that potentially affect all players including GRI. In particular, the authors seek to quantify the overall economic environment in which production, transmission, distribution, consumption, and R ampersand D decisions will be made and how different that overall environment might be under alternative assumptions. An attendant objective of this analysis has been to enlist economists from a range of organizations (producers, regulators, GRI, and consultants) to carefully scrutinize the GRI North American Regional model and results. In particular, the coauthors were assembled from diverse organizations to review and evaluate model outputs, applying their particular experience and perspective. The four EMF-9 scenarios upon which this paper is based are described in detail later in this document. Briefly, scenario one represents a world with a surfeit of gas and a relatively high oil price projection; scenario two considers a lower oil price forecast; scenario three assumes a pessimistic outlook for the gas resource base with the same oil prices as scenario one; and scenario four examines a higher level of demand for gas in the North American gas market. An important objective of this analysis is to illustrate the predictive power of multi-scenario comparisons (as contrasted with detailed analysis of any individual scenario)

Aerosol composition of urban plumes passing over a rural monitoring site

International Nuclear Information System (INIS)

Ellestad, T.G.

1980-01-01

A field study conducted at a ground site 100 km north of St. Louis, Mo., to measure the aerosol composition and gaseous concentrations of urban plumes passing the site is discussed. Coarse and fine aerosol elemental concentrations, height scattering, meteorological data and concentrations of SO 2 , CO, O 3 , and NO-NO/sub x/ were measured and then analyzed together with data from associate investigators on fluorocarbon-11, total hydrocarbons, and size distributions. The results show that: (1) gaseous and elemental aerosol concentrations at the ground site 100 km from the St. Louis urban area were clearly influenced by the St. Louis urban plume, (2) the urban plumes of Chicago and Indianapolis, 350 km from the ground site, may have been detected, (3) sulfur compounds, presumably sulfates, accounted for 30-40% of the mass loading within the St. Louis urban plume, and resided almost entirely within the size range below 2.5 microns, (4) the most reliable urban-plume tracers in this study were fine Pb, fluorocarbon-11, total nonmethane hydrocarbons, and CO, and (5) over a period of several days, there may have been a regional buildup of fine S, light scattering, aerosol mass, O 3 , and NO/sub x/ and, to a lesser extent, CO and fluorocarbon-11

The Veterans Affairs Saint Louis University mental status exam (SLUMS exam) and the Mini-mental status exam as predictors of mortality and institutionalization.

Science.gov (United States)

Cruz-Oliver, D M; Malmstrom, T K; Allen, C M; Tumosa, N; Morley, J E

2012-07-01

To evaluate predictive validity of cognitive dysfunction of the Saint Louis University mental status (SLUMS) exam or mini-mental state exam (MMSE) for institutionalization and mortality after 7.5-years. Longitudinal study. Geriatric Research, Education and Clinical Center Veterans Affairs Hospital St. Louis, MO. Patients (N=705) were screened for cognitive dysfunction in 2003 using the SLUMS exam and MMSE, and mortality and institutionalization up to 7.5-years later were evaluated as outcome measures. The associations between outcome measures and MMSE and SLUMS exam total scores, and cognitive status were examined using Kaplan-Meier curves and Cox proportional-hazards regression. Five hundred thirty-three charts were reviewed, 176/533(33%) patients had died and 31/526 (6%) were institutionalized during 7.5-year follow-up period. All subjects were male with a mean age of 75 years and most had high school education or greater (71%). MMSE dementia, SLUMS dementia (ps<.001) and MCI (p<.05) groups had significantly lower survival rates than normal cognition group in the Kaplan-Meier curves. Scores classified as dementia on SLUMS (HR=2.4, 95% CI 1.6-3.7; p <.001) or MMSE (HR=2.3, 95% CI 1.5-3.6; p <.001) both predicted mortality and, also, institutionalization (SLUMS: HR=3.5, 95% CI 1.3-9.1; p <.01; MMSE: HR=3.8, 95% CI 1.6-9.0; p <.001) after adjustment for covariates. Unadjusted SLUMS exam MCI predicted morality (HR=1.5, 95% CI 1.1-2.2; p <.019) but not institutionalization. The SLUMS exam and MMSE both predict mortality and institutionalization for male patients screened as positive for dementia.

Moisture Management for High R-Value Walls

Energy Technology Data Exchange (ETDEWEB)

Lepage, R. [Building Science Corporation, Somerville, MA (United States); Schumacher, C. [Building Science Corporation, Somerville, MA (United States); Lukachko, A. [Building Science Corporation, Somerville, MA (United States)

2013-11-01

This report explains the moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study. In this project, hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones. The modeling program assessed the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage; the report presents results of the study.

Reflector-moderated critical assemblies

International Nuclear Information System (INIS)

Paxton, H.C.; Jarvis, G.A.; Byers, C.C.

1975-07-01

Experiments with reflector-moderated critical assemblies were part of the Rover Program at the Los Alamos Scientific Laboratory (LASL). These assemblies were characterized by thick D 2 O or beryllium reflectors surrounding large cavities that contained highly enriched uranium at low average densities. Because interest in this type of system has been revived by LASL Plasma Cavity Assembly studies, more detailed descriptions of the early assemblies than had been available in the unclassified literature are provided. (U.S.)

SWAP-Assembler 2: Optimization of De Novo Genome Assembler at Large Scale

Energy Technology Data Exchange (ETDEWEB)

Meng, Jintao; Seo, Sangmin; Balaji, Pavan; Wei, Yanjie; Wang, Bingqiang; Feng, Shengzhong

2016-08-16

In this paper, we analyze and optimize the most time-consuming steps of the SWAP-Assembler, a parallel genome assembler, so that it can scale to a large number of cores for huge genomes with the size of sequencing data ranging from terabyes to petabytes. According to the performance analysis results, the most time-consuming steps are input parallelization, k-mer graph construction, and graph simplification (edge merging). For the input parallelization, the input data is divided into virtual fragments with nearly equal size, and the start position and end position of each fragment are automatically separated at the beginning of the reads. In k-mer graph construction, in order to improve the communication efficiency, the message size is kept constant between any two processes by proportionally increasing the number of nucleotides to the number of processes in the input parallelization step for each round. The memory usage is also decreased because only a small part of the input data is processed in each round. With graph simplification, the communication protocol reduces the number of communication loops from four to two loops and decreases the idle communication time. The optimized assembler is denoted as SWAP-Assembler 2 (SWAP2). In our experiments using a 1000 Genomes project dataset of 4 terabytes (the largest dataset ever used for assembling) on the supercomputer Mira, the results show that SWAP2 scales to 131,072 cores with an efficiency of 40%. We also compared our work with both the HipMER assembler and the SWAP-Assembler. On the Yanhuang dataset of 300 gigabytes, SWAP2 shows a 3X speedup and 4X better scalability compared with the HipMer assembler and is 45 times faster than the SWAP-Assembler. The SWAP2 software is available at https://sourceforge.net/projects/swapassembler.

The effects of regional economic integration in Europe of the pattern north-north and north-south

Directory of Open Access Journals (Sweden)

Antevski Miroslav

2007-01-01

Full Text Available This paper examines the effects of regional economic integration in Europe, especially the North-North and North-South integration patterns, and how the benefits and costs of integration are divided between countries. Outcomes depend on: comparative advantages, factor endowments, factor intensities, competitive advantages, FDI flows, transfers of technology, knowledge spillovers, economies of scale, transport costs, industry/GDP ratios, and agglomeration forces. The North-North integration between high income countries tends to lead to convergence of country incomes. Contrary, the South-South integration between low income countries causes divergence. Low income countries are likely to be better served by the North-South integration.

Polymer Directed Protein Assemblies

NARCIS (Netherlands)

van Rijn, Patrick

2013-01-01

Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e. g., virus particles. Viruses are a multi-protein assembly of which the morphology is

Core/coil assembly for use in superconducting magnets and method for assembling the same

Science.gov (United States)

Kassner, David A.

1979-01-01

A core/coil assembly for use in a superconducting magnet of the focusing or bending type used in syncronous particle accelerators comprising a coil assembly contained within an axial bore of the stacked, washer type, carbon steel laminations which comprise the magnet core assembly, and forming an interference fit with said laminations at the operating temperature of said magnet. Also a method for making such core/coil assemblies comprising the steps of cooling the coil assembly to cryogenic temperatures and drawing it rapidly upwards into the bore of said stacked laminations.

Entomologic investigations of an epidemic of St. Louis encephalitis in Pine Bluff, Arkansas, 1991.

Science.gov (United States)

Savage, H M; Smith, G C; Moore, C G; Mitchell, C J; Townsend, M; Marfin, A A

1993-07-01

An epidemic of St. Louis encephalitis (SLE) occurred in Jefferson County, Arkansas during July-August 1991. At least 26 human cases were involved, with 25 cases in the town of Pine Bluff. Twelve isolates of SLE virus were obtained from mosquitoes collected in Pine Bluff between August 13 and 24: 11 from pools of Culex pipiens quinquefasciatus, resulting in a minimum infection rate of 1.6 per 1,000 (n = 6,768) for this subspecies, and one isolate from a pool of 22 mosquitoes identified as Cx. (Culex) spp. Three of the SLE-positive pools, two from Cx. p. quinquefasciatus and one from Cx. (Cux.) spp., also yielded isolates of Flanders virus. Larval surveys resulted in the collection of seven species in four genera from 28 larva-positive habitats and the identification of one significant site of Cx. p. quinquefasciatus production. Ecologic assessments conducted at 12 randomly selected residences resulted in the identification of 17 larva-positive habitats, for an average mosquito-positive habitat rate of 1.4 per residence, and a Cx. p. quinquefasciatus larva-positive habitat rate of 0.6 per residence. Aedes albopictus and Cx. p. quinquefasciatus were the species most frequently encountered in larval surveys in residential neighborhoods.

Nuclear fuel assemblies and fuel pins usable in such assemblies

International Nuclear Information System (INIS)

Jolly, R.

1982-01-01

A novel end cap for a nuclear fuel assembly is described in detail. It consists of a trisection arrangement which is received within a cell of a cellular grid. The cell contains abutment means with which the trisection comes into abutment. The grid also contains an abutment means for preventing the trisections from being inserted into the cell in an incorrect orientation. The present design allows fuel pins to be securely held in a hold-down grid of a sub-assembly. The design also allows easier dis-assembly of the swollen and embrittled fuel pins prior to reprocessing. (U.K.)

Self-assembly of coiled coil peptides into nanoparticles vs 2-d plates: effects of assembly pathway

Science.gov (United States)

Kim, Kyunghee; Pochan, Darrin

Molecular solution assembly, or self-assembly, is a process by which ordered nanostructures or patterns are formed by non-covalent interactions during assembly. Biomimicry, the use of bioinspired molecules or biologically relevant materials, is an important area of self-assembly research with peptides serving a critical role as molecular tools. The morphology of peptide assemblies can be controlled by adjusting solution conditions such as the concentration of peptides, the temperature, and pH. Herein, spherical nanostructures, which have potential for creating an encapsulation system, are formed by self-assembly when coiled coil peptides are combined in solution. These peptides are homotrimeric and heterodimeric coiled-coil bundles and the homotrimer is connected with each of heterodimer through their external surfaces via disulfide bonds. The resultant covalent constructs could co-assemble into complementary trimeric hubs, respectively. The two peptide constructs are directly mixed and assembled in solution in order to produce either spherical particles or 2-d plates depending on the solution conditions and kinetic pathway of assembly. In particular, structural changes of the self-assembled peptides are explored by control of the thermal history of the assembly solution.

Rapid centriole assembly in Naegleria reveals conserved roles for both de novo and mentored assembly.

Science.gov (United States)

Fritz-Laylin, Lillian K; Levy, Yaron Y; Levitan, Edward; Chen, Sean; Cande, W Zacheus; Lai, Elaine Y; Fulton, Chandler

2016-03-01

Centrioles are eukaryotic organelles whose number and position are critical for cilia formation and mitosis. Many cell types assemble new centrioles next to existing ones ("templated" or mentored assembly). Under certain conditions, centrioles also form without pre-existing centrioles (de novo). The synchronous differentiation of Naegleria amoebae to flagellates represents a unique opportunity to study centriole assembly, as nearly 100% of the population transitions from having no centrioles to having two within minutes. Here, we find that Naegleria forms its first centriole de novo, immediately followed by mentored assembly of the second. We also find both de novo and mentored assembly distributed among all major eukaryote lineages. We therefore propose that both modes are ancestral and have been conserved because they serve complementary roles, with de novo assembly as the default when no pre-existing centriole is available, and mentored assembly allowing precise regulation of number, timing, and location of centriole assembly. © 2016 Wiley Periodicals, Inc.

[The epidemiological study of work-related musculoskeletal disorders and related factors among automobile assembly workers].

Science.gov (United States)

Wang, Zhong-Xu; Qin, Ru-Li; Li, Yu-Zhen; Zhang, Xue-Yan; Jia, Ning; Zhang, Qiu-Ling; Li, Gang; Zhao, Jie; Li, Huan-Huan; Jiang, Hai-Qiang

2011-08-01

To investigate the work-related musculoskeletal disorders among automobile assembly workers, to discusses the related risk factors and their relationship. The selected 1508 automobile assembly workers from a north car manufacturing company were regarded as the study object. The hazard zone jobs checklist, Nordic musculoskeletal symptom questionnaire (NMQ) and pain questionnaire were used to perform the epidemiological cross-sectional and retrospective survey and study for the General status, awkward ergonomics factors and related influencing factors, and musculoskeletal disorders of workers. The predominant body sites of occurring WMSDs among automobile assembly workers were mainly low back, wrist, neck and shoulders, the predominant workshop section of occurring WMSDs were mostly concentrated in engine compartment, interior ornament, door cover, chassis and debugging section. The predominant body site of WMSDs among engine compartment and chassis section workers was low back, interior ornament workers were low back and wrist, door cover workers was wrist, chassis workers was low back, debugging workers were neck and low back. Neck musculoskeletal disorders had the trend with the increase of a body height; Smoking may increase the occurrence of musculoskeletal disorders. The WMSDs appears to be a serious ergonomic proble assem among automobile assembly workers, predominant occurring site of WMSDs is with different workshop section, its characteristics is quite obvious, probably related to its existing awkward work position or activities. The worker height and smoking habits may be important factors which affect musculoskeletal disorders happen.

Next-generation transcriptome assembly

Energy Technology Data Exchange (ETDEWEB)

Martin, Jeffrey A.; Wang, Zhong

2011-09-01

Transcriptomics studies often rely on partial reference transcriptomes that fail to capture the full catalog of transcripts and their variations. Recent advances in sequencing technologies and assembly algorithms have facilitated the reconstruction of the entire transcriptome by deep RNA sequencing (RNA-seq), even without a reference genome. However, transcriptome assembly from billions of RNA-seq reads, which are often very short, poses a significant informatics challenge. This Review summarizes the recent developments in transcriptome assembly approaches - reference-based, de novo and combined strategies-along with some perspectives on transcriptome assembly in the near future.

Human Assisted Assembly Processes

Energy Technology Data Exchange (ETDEWEB)

CALTON,TERRI L.; PETERS,RALPH R.

2000-01-01

Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be a perfectly valid operations, but in reality the operations cannot physically be carried out by a human. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications; however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem HFFMs must be integrated with automated assembly planning to allow engineers to verify that assembly operations are possible and to see ways to make the designs even better. Factories will very likely put humans and robots together in cooperative environments to meet the demands for customized products, for purposes including robotic and automated assembly. For robots to work harmoniously within an integrated environment with humans the robots must have cooperative operational skills. For example, in a human only environment, humans may tolerate collisions with one another if they did not cause much pain. This level of tolerance may or may not apply to robot-human environments. Humans expect that robots will be able to operate and navigate in their environments without collisions or interference. The ability to accomplish this is linked to the sensing capabilities available. Current work in the field of cooperative

Self-Assembly of Infinite Structures

Directory of Open Access Journals (Sweden)

Scott M. Summers

2009-06-01

Full Text Available We review some recent results related to the self-assembly of infinite structures in the Tile Assembly Model. These results include impossibility results, as well as novel tile assembly systems in which shapes and patterns that represent various notions of computation self-assemble. Several open questions are also presented and motivated.

Nuclear fuel assembly

International Nuclear Information System (INIS)

Anthony, A.J.

1980-01-01

A bimetallic spacer means is cooperatively associated with a nuclear fuel assembly and operative to resist the occurrence of in-reactor bowing of the nuclear fuel assembly. The bimetallic spacer means in one embodiment of the invention includes a space grid formed, at least principally, of zircaloy to the external surface of which are attached a plurality of stainless steel strips. In another embodiment the strips are attached to fuel pins. In each of the embodiments, the stainless steel strips during power production expand outwardly to a greater extent than do the members to which the stainless steel strips are attached, thereby forming stiff springs which abut against like bimetallic spacer means with which the other nuclear fuel assemblies are provided in a given nuclear reactor core to thus prevent the occurrence of in-reactor bowing of the nuclear fuel assemblies. (author)

Nuclear fuel assembly

International Nuclear Information System (INIS)

Betten, P.R.

1976-01-01

Under the invention the fuel assembly is particularly suitable for liquid metal cooled fast neutron breeder reactors. Hence, according to the invention a fuel assembly cladding includes inward corrugations with respect to the remainder of the cladding according to a recurring pattern determined by the pitch of the metal wire helically wound round the fuel rods of the assembly. The parts of the cladding pressed inwards correspond to the areas in which the wire encircling the peripheral fuel rods is generally located apart from the cladding, thereby reducing the play between the cladding and the peripheral fuel rods situated in these areas. The reduction in the play in turn improves the coolant flow in the internal secondary channels of the fuel assembly to the detriment of the flow in the peripheral secondary channels and thereby establishes a better coolant fluid temperature profile [fr

Occurrence and sources of Escherichia coli in metropolitan St. Louis streams, October 2004 through September 2007

Science.gov (United States)

Wilkison, Donald H.; Davis, Jerri V.

2010-01-01

The occurrence and sources of Escherichia coli (E. coli), one of several fecal indicator bacteria, in metropolitan St. Louis streams known to receive nonpoint source runoff, occasional discharges from combined and sanitary sewers, and treated wastewater effluent were investigated from October 2004 through September 2007. Three Missouri River sites, five Mississippi River sites, and six small basin tributary stream sites were sampled during base flow and storm events for the presence of E. coli and their sources. E. coli host-source determinations were conducted using local library based genotypic methods. Human fecal contamination in stream samples was additionally confirmed by the presence of Bacteroides thetaiotaomicron, an anaerobic, enteric bacterium with a high occurrence in, and specificity to, humans. Missouri River E. coli densities and loads during base flow were approximately 10 times greater than those in the Mississippi River above its confluence with the Missouri River. Although substantial amounts of E. coli originated from within the study area during base flow and storm events, considerable amounts of E. coli in the Missouri River, as well as in the middle Mississippi River sections downstream from its confluence with the Missouri River, originated in Missouri River reaches upstream from the study area. In lower Mississippi River reaches, bacteria contributions from the numerous combined and sanitary sewer overflows within the study area, as well as contributions from nonpoint source runoff, greatly increased instream E. coli densities. Although other urban factors cannot be discounted, average E. coli densities in streams were strongly correlated with the number of upstream combined and sanitary sewer overflow points, and the percentage of upstream impervious cover. Small basin sites with the greatest number of combined and sanitary sewer overflows (Maline Creek and the River des Peres) had larger E. coli densities, larger loads, and a greater

Method and apparatus for assembling a permanent magnet pole assembly

Science.gov (United States)

Carl, Jr., Ralph James; Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee [Scotia, NY; Dawson, Richard Nils [Voorheesville, NY; Qu, Ronghai [Clifton Park, NY; Avanesov, Mikhail Avramovich [Moscow, RU

2009-08-11

A pole assembly for a rotor, the pole assembly includes a permanent magnet pole including at least one permanent magnet block, a plurality of laminations including a pole cap mechanically coupled to the pole, and a plurality of laminations including a base plate mechanically coupled to the pole.

TPX assembly plan

International Nuclear Information System (INIS)

Knutson, D.

1993-01-01

The TPX machine will be assembled in the TFTR Test Cell at the Plasma Physics Laboratory, utilizing the existing TFTR machine foundation. Preparation of the area for assembly will begin after completion of the decontamination and decommissioning phase on TFTR and certification that the radiation levels remaining, if any, are consistent with the types of operations planned. Assembly operations begin with the arrival of the first components, and conclude, approximately 24 months later, with the successful completion of the integrated systems tests and the achievement of a first plasma

Paleomagnetism and the assembly of the Mexican subcontinent.

Science.gov (United States)

Molina-Garza, R. S.

2008-05-01

The paleomagnetic database for Mexico is still small, but using available data and new results paleomagnetic data can be used to support the following hypothesis: (1) Jurassic anticlockwise rotation of the Chiapas massif and the Yucatan peninsula from a position in the northwest interior of the Golf of Mexico; (2) apparent stability of the Tampico and Coahuila blocks respect to North America for Late Triassic and Jurassic time, allowing for local vertical axis rotations attributed to Cenozoic deformation; (3) clockwise rotation of the Caborca block and the adjacent Jurassic continental arc, without significant north to south latitudinal displacement, between Middle Jurassic and Early Cretaceous time (which argues against the Mojave-Sonora megashear model); and, (4) the apparent accretion of the Guerrero terrane to mainland Mexico after clockwise rotation and transport from a more southern latitude. Paleomagnetic data for the southern Mexico block (SMB) are still difficult to incorporate in reconstructions of western equatorial Pangea. Paleomagnetic data for remagnetized Lower Permian strata and primary directions in igneous rocks of the SMB (crystalline terranes of Oaxaca and Acatlan) suggest stability with respect to North America, which is not consistent with reconstruction of South America closing the Golf region. Alternative explanations require a position for the SMB similar to its present location but at more westerly longitudes. We propose that terranes of the SMB reach their Mesozoic position through mechanisms of extrusion tectonics. Interpretation of Jurassic data for southern Mexico is hindered by incomplete knowledge of the North American APWP and rapid northward drift of the continent. Nonetheless, any model for the evolution of southern Mexico must consider that paleomagnetic data indicate internal deformation of Oaxaquia in pre-Cretaceous time. Paleomagnetic directions reported for Jurassic strata of the Tlaxiaco basin in Oaxaca are interpreted as

Assembly Modulated by Particle Position and Shape: A New Concept in Self-Assembly

DEFF Research Database (Denmark)

Tavacoli, Joe W; Heuvingh, Julien; Du Roure, Olivia

2017-01-01

In this communication we outline how the bespoke arrangements and design of micron-sized superparamagnetic shapes provide levers to modulate their assembly under homogeneous magnetic fields. We label this new approach, 'assembly modulated by particle position and shape' (APPS). Specifically, using...... rectangular lattices of superparamagnetic micron-sized cuboids, we construct distinct microstructures by adjusting lattice pitch and angle of array with respect to a magnetic field. Broadly, we find two modes of assembly: (1) immediate 2D jamming of the cuboids as they rotate to align with the applied field...... (rotation-induced jamming) and (2) aggregation via translation after their full alignment (dipole-dipole assembly). The boundary between these two assembly pathways is independent on field strength being solely a function of the cuboid's dimensions, lattice pitch, and array angle with respect to field...

Corporate realignments in the natural gas industry: does the North American experience foretell the future for the European Union?

Energy Technology Data Exchange (ETDEWEB)

Rutledge, I.; Wright, Ph. [Sheffield Univ., Energy Studies Programme (United Kingdom); Wright, Ph. [Montpellier-1 Univ., CREDEN-LASER, 34 (France)

2000-09-01

This paper seeks to explore the extent to which the corporate realignments which have occurred in the North American Natural Gas Industry during a now relatively lengthy experience with liberalization involving a large number of players, will be imitated in the future by European Union countries other than the UK (which is of course already long-embarked along the path of Anglo-Saxon liberalization). The paper first of all catalogues the North American experience, drawing on company performance data assembled by the authors over the last decade (Rutledge and Wright, 1993, 1995, 1997, 1999, 2000). Secondly, this empirical exploration gives way to theoretical speculation: are there elements of the North American experience for which explanatory generalizations are possible? Thirdly, these empirical and theoretical insights are employed to identify and explore actual and potential differences in the corporate evolution of the European Union natural gas industry. (authors)

Son Excellence Monsieur Pierre-Louis Lorenz Ambassadeur extraordinaire et plénipotentiaire Représentant permanent du Grand-Duché de Luxembourg auprès de l’Office des Nations Unies et des autres organisations internationales à Genève

CERN Multimedia

Ordan, Julien Marius

2017-01-01

Signature de Son Excellence Monsieur Pierre-Louis Lorenz Ambassadeur extraordinaire et plénipotentiaire Représentant permanent du Grand-Duché de Luxembourg auprès de l’Office des Nations Unies et des autres organisations internationales à Genève

Dynamic behaviour of diagnostic assemblies

International Nuclear Information System (INIS)

Pecinka, L.

1980-01-01

The methodology is shown of calculating the frequency spectrum of a diagnostic assembly. The oscillations of the assembly as a whole, of a fuel rod bundle, the assembly jacket and of the individual rods in the bundle were considered. The manufacture is suggested of a model assembly which would be used for testing forced vibrations using an experimental water loop. (M.S.)

Selecting Operations for Assembler Encoding

Directory of Open Access Journals (Sweden)

Tomasz Praczyk

2010-04-01

Full Text Available Assembler Encoding is a neuro-evolutionary method in which a neural network is represented in the form of a simple program called Assembler Encoding Program. The task of the program is to create the so-called Network Definition Matrix which maintains all the information necessary to construct the network. To generate Assembler Encoding Programs and the subsequent neural networks evolutionary techniques are used.
The performance of Assembler Encoding strongly depends on operations used in Assembler Encoding Programs. To select the most effective operations, experiments in the optimization and the predator-prey problem were carried out. In the experiments, Assembler Encoding Programs equipped with different types of operations were tested. The results of the tests are presented at the end of the paper.

Flashback resistant pre-mixer assembly

Science.gov (United States)

Laster, Walter R [Oviedo, FL; Gambacorta, Domenico [Oviedo, FL

2012-02-14

A pre-mixer assembly associated with a fuel supply system for mixing of air and fuel upstream from a main combustion zone in a gas turbine engine. The pre-mixer assembly includes a swirler assembly disposed about a fuel injector of the fuel supply system and a pre-mixer transition member. The swirler assembly includes a forward end defining an air inlet and an opposed aft end. The pre-mixer transition member has a forward end affixed to the aft end of the swirler assembly and an opposed aft end defining an outlet of the pre-mixer assembly. The aft end of the pre-mixer transition member is spaced from a base plate such that a gap is formed between the aft end of the pre-mixer transition member and the base plate for permitting a flow of purge air therethrough to increase a velocity of the air/fuel mixture exiting the pre-mixer assembly.

"Comets, Origins, and Life:” Promoting Interdisciplinary Science in Secondary and Middle Schools in the Washington, DC and Saint Louis, MO Metro Areas

Science.gov (United States)

Bonev, Boncho; Gibb, E. L.; Brewer, G.; Novak, R.; Mandell, A. M.; Seaton, P.; Price, J.; Long, T.; Bahar, S.; Edwards, S. S.

2010-10-01

Developing a full-year program to support secondary and middle school science education is a key part of the "broader impact” component of NSF Grant AST- 0807939 (PI/Co-PI Bonev/Gibb). This program is realized at two stages: (1) a professional development course for teachers is offered during the summer; (2) during the subsequent academic year we collaborate with educators in lessons planning or curriculum development as demanded in their particular schools. We successfully offered the course “ Comets, Origins, and Life: Interdisciplinary Science in the Secondary Classroom ” (45 contact hours; 3 credits) in the summers of 2009 and 2010 at the Catholic University of America. This class demonstrates how a complex hypothesis - for the delivery of water and prebiotic organic matter to early Earth - is being tested by integrating astronomy, physics, chemistry, biology, and Earth and planetary science. Collaborations with participants from the 2009 class include curriculum development within the Earth Science program in Prince Georges county, MD and strengthening science in Washington DC public schools. Our next step is to offer our class in the Saint Louis, MO area. The main challenge in our work with educators is not to present them with "interesting information", but to fit what we offer within the very particular curriculum expectations of their school districts. These curriculum expectations often vary from district to district and sometimes from year to year. We gratefully acknowledge the support by the NSF, allowing to fully integrate our research area into education. We also gratefully acknowledge our collaborations with the Goddard Center for Astrobiology and the Howard B. Owens Science Center (both in MD) in developing our class curriculum. Educators interested in this program can contact Boncho Bonev (bonev@cua.edu; for the Washington DC and Baltimore, MD areas) and Erika Gibb (gibbe@umsl.edu; for the Saint Louis, MO area).

La couleur à Lille au xviie siècle, de Philippe IV à Louis XIV The colour of Lille in the seventeenth century, from Philippe IV to Louis XIV

Directory of Open Access Journals (Sweden)

Étienne Poncelet

2007-06-01

Full Text Available Pays polychrome, de pierres blanches ou bleues et de briques roses, jaunes ou noires, la Flandre manie depuis le Moyen Âge les jeux colorés de matériaux. Sa capitale wallonne, Lille, est la ville méridionale des Pays‑Bas catholiques où s’acclimatent les plantes de la compagnie des Indes néerlandaises et où se déroulent les « joyeuses entrées » des comtes, ducs de Bourgogne, archiducs et autres rois d’Espagne. Cette tradition de luxuriance se traduit à l’âge d'or bourguignon par une efflorescence de couleurs sur les édifices qui durera jusqu’à la prise de Lille par Louis XIV en 1667. Les portes « espagnoles » affichent leurs briques émaillées de couleur. L’hospice Comtesse placarde son retable de pierres peintes sur sa façade d’entrée. La Vieille Bourse colore ses façades au modèle d’un cabinet d’ébénisterie avec ses incrustations de pierres nacrées et de brique luisantes comme les écailles de tortue. Le style franco‑lillois transmettra ce goût pour la couleur à travers la reconstitution du centre ville au xviie siècle, ce dont témoigne le plan-relief de 1743. Les restaurations depuis une dizaine d’années retrouvent cette tradition de joie urbaine dans les autres « grand-places » des villes du Nord.A polychromatic land of white and blue stone and pink, yellow and black brick, Flanders has sought colour combinations in building materials since the Middle Ages. Its French-speaking capital, Lille, was the city in the south of the Catholic Netherlands where plants imported by the Dutch East Indies Company acclimatized and where the ‘Joyous Entry’ celebrations of the counts, Dukes of Burgundy, archdukes and kings of Spain took place. During the golden age of Burgundy, this tradition of luxuriance was reflected in the increasing use of colours on buildings, a trend that would endure until the siege of Lille by Louis XIV in 1667. The ‘Spanish’ gates display brickwork enamelled in

Nuclear reactor fuel assembly

International Nuclear Information System (INIS)

Sasaki, Y.; Tashima, J.

1975-01-01

A description is given of nuclear reactor fuel assemblies arranged in the form of a lattice wherein there is attached to the interface of one of two adjacent fuel assemblies a plate spring having a concave portion curved toward said interface and to the interface of the other fuel assembly a plate spring having a convex portion curved away from said interface

Bouguer images of the North American craton and its structural evolution

Science.gov (United States)

Arvidson, R. E.; Bowring, S.; Eddy, M.; Guinness, E.; Leff, C.; Bindschadler, D.

1984-01-01

Digital image processing techniques have been used to generate Bouguer images of the North American craton that diplay more of the granularity inherent in the data as compared with existing contour maps. A dominant NW-SE linear trend of highs and lows can be seen extending from South Dakota, through Nebraska, and into Missouri. The structural trend cuts across the major Precambrian boundary in Missouri, separating younger granites and rhyolites from older sheared granites and gneisses. This trend is probably related to features created during an early and perhaps initial episode of crustal assembly by collisional processes. The younger granitic materials are probably a thin cover over an older crust.

Design of the ITER Tokamak Assembly Tools

International Nuclear Information System (INIS)

Park, Hyunki; Her, Namil; Kim, Byungchul; Im, Kihak; Jung, Kijung; Lee, Jaehyuk; Im, Kisuk

2006-01-01

ITER (International Thermonuclear Experimental Reactor) Procurement allocation among the seven Parties, EU, JA, CN, IN , KO, RF and US had been decided in Dec. 2005. ITER Tokamak assembly tools is one of the nine components allocated to Korea for the construction of the ITER. Assembly tools except measurement and common tools are supplied to assemble the ITER Tokamak and classified into 9 groups according to components to be assembled. Among the 9 groups of assembly tools, large-sized Sector Sub-assembly Tools and Sector Assembly Tools are used at the first stage of ITER Tokamak construction and need to be designed faster than seven other assembly tools. ITER IT (International Team) proposed Korea to accomplish ITA (ITER Transitional Arrangements) Task on detailed design, manufacturing feasibility and contract specification of specific, large sized tools such as Upending Tool, Lifting Tool, Sector Sub-assembly Tool and Sector Assembly Tool in Oct. 2004. Based on the concept design by ITER IT, Korea carried out ITA Task on detailed design of large-sized and specific Sector Sub-assembly and Sector Assembly Tools until Mar. 2006. The Sector Sub-assembly Tools mainly consist of the Upending, Lifting, Vacuum Vessel Support and Bracing, and Sector Sub-assembly Tool, among which the design of three tools are herein. The Sector Assembly Tools mainly consist of the Toroidal Field (TF) Gravity Support Assembly, Sector In-pit Assembly, TF Coil Assembly, Vacuum Vessel (VV) Welding and Vacuum Vessel Thermal Shield (TS) Assembly Tool, among which the design of Sector In-pit Assembly Tool is described herein

Judgement on the data for fuel assembly outlet temperatures of WWER fuel assemblies in power reactors based on measurements with experimental fuel assemblies

International Nuclear Information System (INIS)

Krause, F.

1986-01-01

In the period from 1980 to 1985, in the Rheinsberg nuclear power plant experimental fuel assemblies were used on lattices at the periphery of the core. These particular fuel assemblies dispose of an extensive in-core instrumentation with different sensors. Besides this, they are fit out with a device to systematically thottle the coolant flow. The large power gradient present at the core position of the experimental fuel assembly causes a temperature profile along the fuel assemblies which is well provable at the measuring points of the outlet temperature. Along the direction of flow this temperature profile in the coolant degrades only slowly. This effect is to be taken into account when measuring the fuel assembly outlet temperature of WWER fuel assemblies. Besides this, the results of the measurements hinted both at a γ-heating of the temperature measuring points and at tolerances in the calculation of the micro power density distribution. (author)

Fuel assemblies

International Nuclear Information System (INIS)

Nagano, Mamoru; Yoshioka, Ritsuo

1983-01-01

Purpose: To effectively utilize nuclear fuels by increasing the reactivity of a fuel assembly and reduce the concentration at the central region thereof upon completion of the burning. Constitution: A fuel assembly is bisected into a central region and a peripheral region by disposing an inner channel box within a channel box. The flow rate of coolants passing through the central region is made greater than that in the peripheral region. The concentration of uranium 235 of the fuel rods in the central region is made higher. In such a structure, since the moderating effect in the central region is improved, the reactivity of the fuel assembly is increased and the uranium concentration in the central region upon completion of the burning can be reduced, fuel economy and effective utilization of uranium can be attained. (Kamimura, M.)

Fuel assembly

International Nuclear Information System (INIS)

Nakatsuka, Masafumi; Matsuzuka, Ryuji.

1976-01-01

Object: To provide a fuel assembly which can decrease pressure loss of coolant to uniform temperature. Structure: A sectional area of a flow passage in the vicinity of an inner peripheral surface of a wrapper tube is limited over the entire length to prevent the temperature of a fuel element in the outermost peripheral portion from being excessively decreased to thereby flatten temperature distribution. To this end, a plurality of pincture-frame-like sheet metals constituting a spacer for supporting a fuel assembly, which has a plurality of fuel elements planted lengthwise and in given spaced relation within the wrapper tube, is disposed in longitudinal grooves and in stacked fashion to form a substantially honeycomb-like space in cross section. The fuel elements are inserted and supported in the space to form a fuel assembly. (Kamimura, M.)

Welding facilities for NPP assembling

International Nuclear Information System (INIS)

Rojtenberg, S.S.

1987-01-01

Recommendations concerning the choice of equipment for welding in pre-assembling work shops, in the enlarging assembling shops and at the assembling site, are given. Advanced production automatic welders and semiautomatic machines, applied during the NPP equipment assembling as well as automatic machines specially produced for welding the main reactor components and pipelines are described. Automatic and semiautomatic machine and manual welding post supply sources are considered

Composite turbine bucket assembly

Science.gov (United States)

Liotta, Gary Charles; Garcia-Crespo, Andres

2014-05-20

A composite turbine blade assembly includes a ceramic blade including an airfoil portion, a shank portion and an attachment portion; and a transition assembly adapted to attach the ceramic blade to a turbine disk or rotor, the transition assembly including first and second transition components clamped together, trapping said ceramic airfoil therebetween. Interior surfaces of the first and second transition portions are formed to mate with the shank portion and the attachment portion of the ceramic blade, and exterior surfaces of said first and second transition components are formed to include an attachment feature enabling the transition assembly to be attached to the turbine rotor or disk.

How neuroscience is taught to North American dental students: results of the Basic Science Survey Series.

Science.gov (United States)

Gould, Douglas J; Clarkson, Mackenzie J; Hutchins, Bob; Lambert, H Wayne

2014-03-01

The purpose of this study was to determine how North American dental students are taught neuroscience during their preclinical dental education. This survey represents one part of a larger research project, the Basic Science Survey Series for Dentistry, which covers all of the biomedical science coursework required of preclinical students in North American dental schools. Members of the Section on Anatomical Sciences of the American Dental Education Association assembled, distributed, and analyzed the neuroscience survey, which had a 98.5 percent response from course directors of the sixty-seven North American dental schools. The eighteen-item instrument collected demographic data on the course directors, information on the content in each course, and information on how neuroscience content is presented. Findings indicate that 1) most neuroscience instruction is conducted by non-dental school faculty members; 2) large content variability exists between programs; and 3) an increase in didactic instruction, integrated curricula, and use of computer-aided instruction is occurring. It is anticipated that the information derived from the survey will help guide neuroscience curricula in dental schools and aid in identifying appropriate content.

TOOL ASSEMBLY WITH BI-DIRECTIONAL BEARING

Science.gov (United States)

Longhurst, G.E.

1961-07-11

A two-direction motion bearing which is incorporated in a refueling nuclear fuel element trsnsfer tool assembly is described. A plurality of bi- directional bearing assembliesare fixed equi-distantly about the circumference of the transfer tool assembly to provide the tool assembly with a bearing surface- for both axial and rotational motion. Each bi-directional bearing assembly contains a plurality of circumferentially bulged rollers mounted in a unique arrangement which will provide a bearing surface for rotational movement of the tool assembly within a bore. The bi-direc tional bearing assembly itself is capable of rational motion and thus provides for longitudinal movement of the tool assembly.

Fuel assembly spacer

International Nuclear Information System (INIS)

Shirakawa, Ken-etsu.

1988-01-01

Purpose: To reduce the pressure loss of coolants by fuel assembly spacers. Constitution: Spacers for supporting a fuel assembly are attached by means of a plurality of wires to an outer frame. The outer frame is made of shape memory alloy such that the wires are caused to slacken at normal temperature and the slacking of the wires is eliminated in excess of the transition temperature. Since the wires slacken at the normal temperature, fuel rods can be inserted easily. After the insertion of the fuel rods, when the entire portion or the outer frame is heated by water or gas at a predetermined temperature, the outer frame resumes its previously memorized shape to tighten the wires and, accordingly, the fuel rods can be supported firmly. In this way, since the fuel rods are inserted in the slacken state of the wires and, after the assembling, the outer frame resumes its memorized shape, the assembling work can be conducted efficiently. (Kamimura, M.)

Ordinary General Assembly

CERN Multimedia

Staff Association

2011-01-01

Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation et and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly ma...

Ordinary General Assembly

CERN Multimedia

Staff Association

2011-01-01

Tuesday 12 April at 14.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 20 April 2010 Presentation and approval of the Activity Report 2010 Presentation and approval of the Financial Report 2010 Presentation and approval of the Auditors Report 2010 Programme for 2011 Presentation and approval of the draft budget and subscription rate 2012 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may r...

Ordinary General Assembly

CERN Multimedia

Staff Association

2010-01-01

Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may require t...

Interannual variability of western North Pacific SST anomalies and its impact on North Pacific and North America

Science.gov (United States)

Park, Jae-Heung; An, Soon-Il; Kug, Jong-Seong

2017-12-01

In this study, the interannual variability of sea surface temperature (SST) and its atmospheric teleconnection over the western North Pacific (WNP) toward the North Pacific/North America during boreal winter are investigated. First, we defined the WNP mode as the first empirical orthogonal function (EOF) mode of SST anomalies over the WNP region (100-165°E, 0-35°N), of which the principle component time-series are significantly correlated with several well-known climate modes such as the warm pool mode which is the second EOF mode of the tropical to North Pacific SST anomalies, North Pacific oscillation (NPO), North Pacific gyre oscillation (NPGO), and central Pacific (CP)-El Niño at 95% confidence level, but not correlated with the eastern Pacific (EP)-El Niño. The warm phase of the WNP mode (sea surface warming) is initiated by anomalous southerly winds through reduction of wind speed with the background of northerly mean winds over the WNP during boreal winter, i.e., reduced evaporative cooling. Meanwhile, the atmospheric response to the SST warming pattern and its diabatic heating further enhance the southerly wind anomaly, referred to the wind-evaporation-SST (WES) feedback. Thus, the WNP mode is developed and maintained through winter until spring, when the northerly mean wind disappears. Furthermore, it is also known that anomalous upper-level divergence associated with WNP mode leads to the NPO-like structure over the North Pacific and the east-west pressure contrast pattern over the North America through Rossby wave propagation, impacting the climate over the North Pacific and North America.

Preliminary High-Throughput Metagenome Assembly

Energy Technology Data Exchange (ETDEWEB)

Dusheyko, Serge; Furman, Craig; Pangilinan, Jasmyn; Shapiro, Harris; Tu, Hank

2007-03-26

Metagenome data sets present a qualitatively different assembly problem than traditional single-organism whole-genome shotgun (WGS) assembly. The unique aspects of such projects include the presence of a potentially large number of distinct organisms and their representation in the data set at widely different fractions. In addition, multiple closely related strains could be present, which would be difficult to assemble separately. Failure to take these issues into account can result in poor assemblies that either jumble together different strains or which fail to yield useful results. The DOE Joint Genome Institute has sequenced a number of metagenomic projects and plans to considerably increase this number in the coming year. As a result, the JGI has a need for high-throughput tools and techniques for handling metagenome projects. We present the techniques developed to handle metagenome assemblies in a high-throughput environment. This includes a streamlined assembly wrapper, based on the JGI?s in-house WGS assembler, Jazz. It also includes the selection of sensible defaults targeted for metagenome data sets, as well as quality control automation for cleaning up the raw results. While analysis is ongoing, we will discuss preliminary assessments of the quality of the assembly results (http://fames.jgi-psf.org).

Assembling Transgender Moments

Science.gov (United States)

Greteman, Adam J.

2017-01-01

In this article, the author seeks to assemble moments--scholarly, popular, and aesthetic--in order to explore the possibilities that emerge as moments collect in education's encounters with the needs, struggles, and possibilities of transgender lives and practices. Assembling moments, the author argues, illustrates the value of "moments"…

Evaluation of sensitivity to desertification by a modified ESAs method in two sub-Saharan peri-urban areas: Ouagadougou (Burkina Faso) and Saint Louis (Senegal)

Science.gov (United States)

Topa, Maria Elena; Iavazzo, Pietro; Terracciano, Stefano; Adamo, Paola; Coly, Adrien; De Paola, Francesco; Giordano, Simonetta; Giugni, Maurizio; Traoré, Seydou Eric

2013-04-01

Desertification is regarded as one of the major global environmental problems of the 21st century. The African sub-Sahara is often quoted as the most seriously affected region with a significant loss of biological and economic productivity of the land due to climate characteristics and fluctuations, unsustainable land uses, overgrazing and inappropriate agricultural practices. Due to its complexity, dynamism and extent, desertification is complicated to check and assess. The absence of an agreed methodology for the identification of affected areas is a critical point in desertification monitoring and assessment. An integrated approach which uses both qualitative and quantitative measures is crucial to reach the aim of sustainable resource use and has to be reflected in application of sets of indicators. The selection of appropriate indicators and their integration and interpretation should be conducted by the objectives to be achieved and the questions to be answered. This study, carried out within the FP7-ENV-2010 CLUVA project (Climate change and Urban Vulnerability in Africa), aimed to assess the sensitivity to desertification in peri-urban areas of both Ouagadougou (Burkina Faso) and Saint Louis (Senegal) cities. The approach was based on the implementation and adaptation to the local conditions of the modeling methodology developed within the MEDALUS project (Mediterranean Desertification And Land Use). The model is characterized by a multi-factor approach based on the assessment of both environmental quality indicators (vegetation, soil, climate) and anthropogenic factors (land management). All local data, arranged in a GIS environment, allowed the generation of maps identifying Environmentally Sensitive Areas (ESAs) and an Index of Environmentally Sensitive Areas (ESAI). Changes and integrations to the original methodology have been set taking into account the environmental and social features of the whole sub-Saharan west Africa in order to allow the use of

Centrioles: some self-assembly required.

Science.gov (United States)

Song, Mi Hye; Miliaras, Nicholas B; Peel, Nina; O'Connell, Kevin F

2008-12-01

Centrioles play an important role in organizing microtubules and are precisely duplicated once per cell cycle. New (daughter) centrioles typically arise in association with existing (mother) centrioles (canonical assembly), suggesting that mother centrioles direct the formation of daughter centrioles. However, under certain circumstances, centrioles can also selfassemble free of an existing centriole (de novo assembly). Recent work indicates that the canonical and de novo pathways utilize a common mechanism and that a mother centriole spatially constrains the self-assembly process to occur within its immediate vicinity. Other recently identified mechanisms further regulate canonical assembly so that during each cell cycle, one and only one daughter centriole is assembled per mother centriole.

Fuel assembly storage pool

International Nuclear Information System (INIS)

Hiranuma, Hiroshi.

1976-01-01

Object: To remove limitation of the number of storage of fuel assemblies to increase the number of storage thereof so as to relatively reduce the water depth required for shielding radioactive rays. Structure: Fuel assembly storage rack containers for receiving a plurality of spent fuel assembly racks are stacked in multi-layer fashion within a storage pool filled with water for shielding radioactive rays and removing heat. (Furukawa, Y.)

Dissolved inorganic carbon, alkalinity, temperature, salinity and other variables collected from discrete sample and profile observations using CTD, bottle and other instruments from the LOUIS S. ST. LAURENT in the Baffin Bay, Davis Strait and others from 1997-08-03 to 1997-08-18 (NODC Accession 0114432)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0114432 includes chemical, discrete sample, physical and profile data collected from LOUIS S. ST. LAURENT in the Baffin Bay, Davis Strait, Hudson...

Dissolved inorganic carbon, alkalinity, temperature, salinity and other variables collected from discrete sample and profile observations using CTD, bottle and other instruments from the LOUIS S. ST. LAURENT in the Beaufort Sea and Northwest Passage from 1997-08-31 to 1997-09-16 (NODC Accession 0116061)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0116061 includes chemical, discrete sample, physical and profile data collected from LOUIS S. ST. LAURENT in the Beaufort Sea and Northwest Passage...

Polymer Directed Protein Assemblies

Directory of Open Access Journals (Sweden)

Patrick van Rijn

2013-05-01

Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

Multi-scale coarse-graining for the study of assembly pathways in DNA-brick self-assembly

Science.gov (United States)

Fonseca, Pedro; Romano, Flavio; Schreck, John S.; Ouldridge, Thomas E.; Doye, Jonathan P. K.; Louis, Ard A.

2018-04-01

Inspired by recent successes using single-stranded DNA tiles to produce complex structures, we develop a two-step coarse-graining approach that uses detailed thermodynamic calculations with oxDNA, a nucleotide-based model of DNA, to parametrize a coarser kinetic model that can reach the time and length scales needed to study the assembly mechanisms of these structures. We test the model by performing a detailed study of the assembly pathways for a two-dimensional target structure made up of 334 unique strands each of which are 42 nucleotides long. Without adjustable parameters, the model reproduces a critical temperature for the formation of the assembly that is close to the temperature at which assembly first occurs in experiments. Furthermore, the model allows us to investigate in detail the nucleation barriers and the distribution of critical nucleus shapes for the assembly of a single target structure. The assembly intermediates are compact and highly connected (although not maximally so), and classical nucleation theory provides a good fit to the height and shape of the nucleation barrier at temperatures close to where assembly first occurs.

Growth Comparison of Red Jabon in North Bolaang Mongondow and North Minahasa

Directory of Open Access Journals (Sweden)

arif irawan

2016-04-01

Full Text Available Red Jabon is priority species that projected to be developed in plantation forests of North Minahasa Regency. Red Jabon is can adapt well various environmental conditions. The natural habitat of the red Jabon in North Sulawesi region was known in North Bolaang Mongondow. This study aimed to compare the growth of red jabon at the age of 1 year in North Minahasa Regency and North Bolaang Mongondow. The experiment was conducted in two (2 locations i.e. in Talawaan Village (North Minahasa Regency and Nunuka Village (North Bolaang Mongondow. Two independent samples t test was conducted to determine the differences in height and diameter growth parameters at two test sites.The results showed that there was no difference in the growth of red Jabon between North Minahasa and North Bolaang Mongondow. The average height and diameter of red Jabon in North Minahasa Regency is at 215.84 cm and 4.34 cm, while the same parameters of North Bolaang Mongondow amounted to 231.79 cm and 4.14 cm. The development efforts on the plantations of red Jabon North Minahasa Regency need to be improved because of the environmental conditions in this region is very suitable for the growth of red Jabon.

Dynamic Multi-Component Hemiaminal Assembly

Science.gov (United States)

You, Lei; Long, S. Reid; Lynch, Vincent M.

2012-01-01

A simple approach to generating in situ metal templated tris-(2-picolyl)amine-like multi-component assemblies with potential applications in molecular recognition and sensing is reported. The assembly is based on the reversible covalent association between di-(2-picolyl)amine and aldehydes. Zinc ion is the best for inducing assembly among the metal salts investigated, while 2-picolinaldehyde is the best among the heterocyclic aldehydes studied. Although an equilibrium constant of 6.6 * 103 M-1 was measured for the assembly formed by 2-picolinaldehdye, di-(2-picolyl)amine, and zinc triflate, the equilibrium constants for other systems are in the 102 M-1 range. X-ray structural analysis revealed that zinc adopts a trigonal bipyramidal geometry within the assembled ligand. The diversity and equilibrium of the assemblies are readily altered by simply changing concentrations, varying components, or adding counter anions. PMID:21919095

Advanced gray rod control assembly

Science.gov (United States)

Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

2013-09-17

An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

Multi-Robot Assembly Strategies and Metrics

Science.gov (United States)

MARVEL, JEREMY A.; BOSTELMAN, ROGER; FALCO, JOE

2018-01-01

We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies. PMID:29497234

Multi-Robot Assembly Strategies and Metrics.

Science.gov (United States)

Marvel, Jeremy A; Bostelman, Roger; Falco, Joe

2018-02-01

We present a survey of multi-robot assembly applications and methods and describe trends and general insights into the multi-robot assembly problem for industrial applications. We focus on fixtureless assembly strategies featuring two or more robotic systems. Such robotic systems include industrial robot arms, dexterous robotic hands, and autonomous mobile platforms, such as automated guided vehicles. In this survey, we identify the types of assemblies that are enabled by utilizing multiple robots, the algorithms that synchronize the motions of the robots to complete the assembly operations, and the metrics used to assess the quality and performance of the assemblies.

Dissolved inorganic carbon, alkalinity, temperature, salinity and other variables collected from discrete sample and profile observations using CTD, bottle and other instruments from the LOUIS S. ST. LAURENT in the Arctic Ocean and Beaufort Sea from 1997-09-24 to 1997-10-15 (NODC Accession 0113984)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0113984 includes chemical, discrete sample, physical and profile data collected from LOUIS S. ST. LAURENT in the Arctic Ocean and Beaufort Sea from...

PAGES-Powell North America 2k database

Science.gov (United States)

McKay, N.

2014-12-01

Syntheses of paleoclimate data in North America are essential for understanding long-term spatiotemporal variability in climate and for properly assessing risk on decadal and longer timescales. Existing reconstructions of the past 2,000 years rely almost exclusively on tree-ring records, which can underestimate low-frequency variability and rarely extend beyond the last millennium. Meanwhile, many records from the full spectrum of paleoclimate archives are available and hold the potential of enhancing our understanding of past climate across North America over the past 2000 years. The second phase of the Past Global Changes (PAGES) North America 2k project began in 2014, with a primary goal of assembling these disparate paleoclimate records into a unified database. This effort is currently supported by the USGS Powell Center together with PAGES. Its success requires grassroots support from the community of researchers developing and interpreting paleoclimatic evidence relevant to the past 2000 years. Most likely, fewer than half of the published records appropriate for this database are publicly archived, and far fewer include the data needed to quantify geochronologic uncertainty, or to concisely describe how best to interpret the data in context of a large-scale paleoclimatic synthesis. The current version of the database includes records that (1) have been published in a peer-reviewed journal (including evidence of the record's relationship to climate), (2) cover a substantial portion of the past 2000 yr (>300 yr for annual records, >500 yr for lower frequency records) at relatively high resolution (<50 yr/observation), and (3) have reasonably small and quantifiable age uncertainty. Presently, the database includes records from boreholes, ice cores, lake and marine sediments, speleothems, and tree rings. This poster presentation will display the site locations and basic metadata of the records currently in the database. We invite anyone with interest in

ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

Gorpani, B.

2000-01-01

The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and dry handling areas are controlled by the control and tracking system. The system operating sequence begins with moving transportation casks to the cask preparation area. The cask preparation operations consist of cask cavity gas sampling, cask venting, cask cool-down, outer lid removal, and inner shield plug lifting fixture attachment. Casks containing bare SNF (no DPC) are filled with water and placed in the cask unloading pool. The inner shield plugs are removed underwater. For casks containing a DPC, the cask lid(s) is removed, and the DPC is penetrated, sampled, vented, and cooled. A DPC lifting fixture is attached and the cask is placed

Reconciling competing priorities in commissioning: the future of bone densitometry service for North Wales

Directory of Open Access Journals (Sweden)

Russell Ian

2007-01-01

Full Text Available Abstract Background Osteoporosis creates brittle bones susceptible to fracture, with resulting high levels of morbidity and mortality. Poor access to bone densitometry services for the residents of North Wales led to the Welsh Assembly Government offering capital to purchase a dual-energy X-ray absorptiometry (DXA scanner, used to diagnose osteoporosis, for the region. The commissioning question for the six Local Health Boards across North Wales was where to site the new scanner. This decision needed to reflect current inequalities in access to services and concerns over inappropriate prescribing relative to Welsh norms. Methods Epidemiological, corporate and comparative healthcare needs assessments were performed. In addition, two cross-sectional surveys were conducted to determine the views of general practices and users of bone densitometry services resident in North Wales. An option appraisal and sensitivity analysis of 13 costed options for DXA scanning was conducted. Results We estimated that only 31% of the people in North Wales who met national guidelines were receiving DXA scans. There was definite inequity of access to the current service provided by area of residence. There was also evidence of inequity of access by age and sex. The most suitable option identified in the option appraisal was a bone densitometry service based in the central location of Llandudno. Conclusion The assessment identified significant unmet need for DXA scanning. A recommendation was made to improve access through the introduction of a new bone densitometry service based at Llandudno. This would double scanning provision provided and reduce travel costs and time for many North Wales residents. This recommendation was adopted by a joint commissioning group established by the six Local Health Boards in North Wales at the end of 2004 – evidence based commissioning in practice.

Storage method for spent fuel assembly

International Nuclear Information System (INIS)

Tajiri, Hiroshi.

1992-01-01

In the present invention, spent fuel assemblies are arranged at a dense pitch in a storage rack by suppressing the reactivity of the assemblies, to increase storage capacity for the spent fuel assemblies. That is, neutron absorbers are filled in the cladding tube of an absorbing rod, and the diameter thereof is substantially equal with that of a fuel rod. A great amount of the absorbing rods are arranged at the outer circumference of the fuel assembly. Then, they are fixed integrally to the fuel assembly and stored in a storage rack. In this case, the storage rack may be constituted only with angle materials which are inexpensive and installed simply. With such a constitution, in the fuel assembly having absorbing rods wound therearound, neutrons are absorbed by absorbing rods and the reactivity is lowered. Accordingly, the assembly arrangement pitch in the storage rack can be made dense. As a result, the storage capacity for the assemblies is increased. (I.S.)

Nuclear reactor fuel assembly

International Nuclear Information System (INIS)

Vikhorev, Yu.V.; Biryukov, G.I.; Kirilyuk, N.A.; Lobanov, V.N.

1977-01-01

A fuel assembly is proposed for nuclear reactors allowing remote replacement of control rod bundles or their shifting from one assembly to another, i.e., their multipurpose use. This leads to a significant increase in fuel assembly usability. In the fuel assembly the control rod bundle is placed in guide tube channels to which baffles are attached for fuel element spacing. The remote handling of control rods is provided by a hollow cylinder with openings in its lower bottom through which the control rods pass. All control rods in a bundle are mounted to a cross beam which in turn is mounted in the cylinder and is designed for grasping the whole rod bundle by a remotely controlled telescopic mechanism in bundle replacement or shifting. (Z.M.)

Nuclear fuel assembly

International Nuclear Information System (INIS)

Delafosse, Jacques.

1977-01-01

This invention relates to a nuclear fuel assembly for a light or heavy water reactor, or for a fast reactor of the kind with a bundle of cladded pins, maintained parallel to each other in a regular network by an assembly of separate supporting grids, fitted with elastic bearing surfaces on these pins [fr

Blade attachment assembly

Science.gov (United States)

Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

2016-05-03

An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

Magnetic nanoparticle assemblies

CERN Document Server

Trohidou, Kalliopi N

2014-01-01

Magnetic nanoparticles with diameters in the range of a few nanometers are today at the cutting edge of modern technology and innovation because of their use in numerous applications ranging from engineering to biomedicine. A great deal of scientific interest has been focused on the functionalization of magnetic nanoparticle assemblies. The understanding of interparticle interactions is necessary to clarify the physics of these assemblies and their use in the development of high-performance magnetic materials. This book reviews prominent research studies on the static and dynamic magnetic properties of nanoparticle assemblies, gathering together experimental and computational techniques in an effort to reveal their optimized magnetic properties for biomedical use and as ultra-high magnetic recording media.

Nuclear fuel assembly

International Nuclear Information System (INIS)

Hayashi, Hiroshi; Watari, Yoshio; Hizahara, Hiroshi; Masuoka, Ryuzo.

1970-01-01

When exchanging nuclear fuel assemblies during the operation of a nuclear reactor, melting of fuel bodies, and severence of tubular claddings is halted at the time of insertion by furnishing a neutron absorbing material such as B 10 , Cd, Gd or the like at the forward end of the fuel assembly to thereby lower the power peak at the forward ends of the fuel elements to within tolerable levels and thus prevent both fuel liquification and excessive expansion. The neutron absorbing material may be attached in the form of a plate to the fuel assembly forward tie plate, or may be inserted as a pellet into the front end of the tubular cladding. (Owens, K.J.)

Reactor fuel assembly

International Nuclear Information System (INIS)

Anthony, A.J.; Groves, M.D.

1980-01-01

A nuclear reactor fuel assembly having a lower end fitting and actuating means interacting therewith for holding the assembly down on the core support stand against the upward flow of coolant. Locking means for interacting with projections on the support stand are carried by the lower end fitting and are actuated by the movement of an actuating rod operated from above the top of the assembly. In one embodiment of the invention the downward movement of the actuating rod forces a latched spring to move outward into locking engagement with a shoulder on the support stand projections. In another embodiment, the actuating rod is rotated to effect the locking between the end fitting and the projection. (author)

Fuel assembly inspection device

International Nuclear Information System (INIS)

Yaginuma, Yoshitaka

1998-01-01

The present invention provides a device suitable to inspect appearance of fuel assemblies by photographing the appearance of fuel assemblies. Namely, the inspection device of the present invention measures bowing of fuel assembly or each of fuel rods or both of them based on the partially photographed images of fuel assembly. In this case, there is disposed a means which flashily projects images in the form of horizontal line from a direction intersecting obliquely relative to a horizontal cross section of the fuel assembly. A first image processing means separates the projected image pictures including projected images and calculates bowing. A second image processing means replaces the projected image pictures of the projected images based on projected images just before and after the photographing. Then, images for the measurement of bowing and images for inspection can be obtained simultaneously. As a result, the time required for the photographing can be shortened, the time for inspection can be shortened and an effect of preventing deterioration of photographing means by radiation rays can be provided. (I.S.)

Vertical pump assembly

International Nuclear Information System (INIS)

Dohnal, M.; Rosel, J.; Skarka, V.

1988-01-01

The mounting is described of the drive assembly of a vertical pump for nuclear power plants in areas with seismic risk. The assembly is attached to the building floor using flexible and damping elements. The design allows producing seismically resistant pumps without major design changes in the existing types of vertical pumps. (E.S.). 1 fig

Technology for assembling and welding of top and bottom nozzles in fuel assembly

International Nuclear Information System (INIS)

Xia Chenglie; Wan Longfu

1989-10-01

The construction character, technology and sequence of assembling and welding, assembling jig used for preventing from deformation, and acceptance test of welding technology for top and bottom nozzles are presented

X-Ray Assembler Data

Data.gov (United States)

U.S. Department of Health & Human Services — Federal regulations require that an assembler who installs one or more certified components of a diagnostic x-ray system submit a report of assembly. This database...

Nuclear fuel assembly seismic amplitude limiter

International Nuclear Information System (INIS)

Anthony, A.J.

1977-01-01

The ability of a nuclear reactor to withstand high seismic loading is enhanced by including, on each fuel assembly, at least one seismic grid which reduces the magnitude of the possible lateral deflection of the individual fuel elements and the entire fuel assembly. The reduction in possible deflection minimizes the possibility of impact of the spacer grids of one fuel assembly on those of an adjacent fuel assembly and reduces the magnitude of forces associated with any such impact thereby minimizing the possibility of fuel assembly damage as a result of high seismic loading. The seismic grid is mounted from the fuel assembly guide tubes, has greater external dimensions when compared to the fuel assembly spacer grids and normally does not support or otherwise contact the fuel elements. The reduction in possible deflection is achieved through reduction of the clearance between adjacent fuel assemblies made possible by the use in the seismic grid of a high strength material characterized by favorable thermal expansion characteristics and minimal irradiation induced expansion

Chemical reactions directed Peptide self-assembly.

Science.gov (United States)

Rasale, Dnyaneshwar B; Das, Apurba K

2015-05-13

Fabrication of self-assembled nanostructures is one of the important aspects in nanoscience and nanotechnology. The study of self-assembled soft materials remains an area of interest due to their potential applications in biomedicine. The versatile properties of soft materials can be tuned using a bottom up approach of small molecules. Peptide based self-assembly has significant impact in biology because of its unique features such as biocompatibility, straight peptide chain and the presence of different side chain functionality. These unique features explore peptides in various self-assembly process. In this review, we briefly introduce chemical reaction-mediated peptide self-assembly. Herein, we have emphasised enzymes, native chemical ligation and photochemical reactions in the exploration of peptide self-assembly.

Benchmark assemblies of the Los Alamos critical assemblies facility

International Nuclear Information System (INIS)

Dowdy, E.J.

1986-01-01

Several critical assemblies of precisely known materials composition and easily calculated and reproducible geometries have been constructed at the Los Alamos National Laboratory. Some of these machines, notably Jezebel, Flattop, Big Ten, and Godiva, have been used as benchmark assemblies for the comparison of the results of experimental measurements and computation of certain nuclear reaction parameters. These experiments are used to validate both the input nuclear data and the computational methods. The machines and the applications of these machines for integral nuclear data checks are described. (author)

Benchmark assemblies of the Los Alamos Critical Assemblies Facility

International Nuclear Information System (INIS)

Dowdy, E.J.

1985-01-01

Several critical assemblies of precisely known materials composition and easily calculated and reproducible geometries have been constructed at the Los Alamos National Laboratory. Some of these machines, notably Jezebel, Flattop, Big Ten, and Godiva, have been used as benchmark assemblies for the comparison of the results of experimental measurements and computation of certain nuclear reaction parameters. These experiments are used to validate both the input nuclear data and the computational methods. The machines and the applications of these machines for integral nuclear data checks are described

Benchmark assemblies of the Los Alamos critical assemblies facility

International Nuclear Information System (INIS)

Dowdy, E.J.

1985-01-01

Several critical assemblies of precisely known materials composition and easily calculated and reproducible geometries have been constructed at the Los Alamos National Laboratory. Some of these machines, notably Jezebel, Flattop, Big Ten, and Godiva, have been used as benchmark assemblies for the comparison of the results of experimental measurements and computation of certain nuclear reaction parameters. These experiments are used to validate both the input nuclear data and the computational methods. The machines and the applications of these machines for integral nuclear data checks are described

Molecular self-assembly advances and applications

CERN Document Server

Dequan, Alex Li

2012-01-01

In the past several decades, molecular self-assembly has emerged as one of the main themes in chemistry, biology, and materials science. This book compiles and details cutting-edge research in molecular assemblies ranging from self-organized peptide nanostructures and DNA-chromophore foldamers to supramolecular systems and metal-directed assemblies, even to nanocrystal superparticles and self-assembled microdevices

SP-100 nuclear assembly test: Test assembly functional requirements and system arrangement

International Nuclear Information System (INIS)

Fallas, T.T.; Gluck, R.; Motwani, K.; Clay, H.; O'Neill, G.

1991-01-01

This paper describes the functional requirements and the system that will be tested to validate the reactor, flight shield, and flight controller of the SP-100 Generic Flight System (GFS). The Nuclear Assembly Test (NAT) consists of the test article (SP-100 reactor with control devices and the flight shield) and its supporting systems. The NAT test assembly is being designed by GE. Westinghouse Hanford Company (WHC) is designing the test cell and vacuum vessel system that will contain the NAT test assembly (Renkey et al. 1989). Preliminary design reviews have been completed and the final design is under way

Fuel assembly guide tube

International Nuclear Information System (INIS)

Jabsen, F.S.

1979-01-01

This invention is directed toward a nuclear fuel assembly guide tube arrangement which restrains spacer grid movement due to coolant flow and which offers secondary means for supporting a fuel assembly during handling and transfer operations

Magnetic self-assembly of small parts

Science.gov (United States)

Shetye, Sheetal B.

Modern society's propensity for miniaturized end-user products is compelling electronic manufacturers to assemble and package different micro-scale, multi-technology components in more efficient and cost-effective manners. As the size of the components gets smaller, issues such as part sticking and alignment precision create challenges that slow the throughput of conventional robotic pick-n-place systems. As an alternative, various self-assembly approaches have been proposed to manipulate micro to millimeter scale components in a parallel fashion without human or robotic intervention. In this dissertation, magnetic self-assembly (MSA) is demonstrated as a highly efficient, completely parallel process for assembly of millimeter scale components. MSA is achieved by integrating permanent micromagnets onto component bonding surfaces using wafer-level microfabrication processes. Embedded bonded powder methods are used for fabrication of the magnets. The magnets are then magnetized using pulse magnetization methods, and the wafers are then singulated to form individual components. When the components are randomly mixed together, self-assembly occurs when the intermagnetic forces overcome the mixing forces. Analytical and finite element methods (FEM) are used to study the force interactions between the micromagnets. The multifunctional aspects of MSA are presented through demonstration of part-to-part and part-to-substrate assembly of 1 mm x 1mm x 0.5 mm silicon components. Part-to-part assembly is demonstrated by batch assembly of free-floating parts in a liquid environment with the assembly yield of different magnetic patterns varying from 88% to 90% in 20 s. Part-to-substrate assembly is demonstrated by assembling an ordered array onto a fixed substrate in a dry environment with the assembly yield varying from 86% to 99%. In both cases, diverse magnetic shapes/patterns are used to control the alignment and angular orientation of the components. A mathematical model is

Mechanical Self-Assembly Science and Applications

CERN Document Server

2013-01-01

Mechanical Self-Assembly: Science and Applications introduces a novel category of self-assembly driven by mechanical forces. This book discusses self-assembly in various types of small material structures including thin films, surfaces, and micro- and nano-wires, as well as the practice's potential application in micro and nanoelectronics, MEMS/NEMS, and biomedical engineering. The mechanical self-assembly process is inherently quick, simple, and cost-effective, as well as accessible to a large number of materials, such as curved surfaces for forming three-dimensional small structures. Mechanical self-assembly is complementary to, and sometimes offer advantages over, the traditional micro- and nano-fabrication. This book also: Presents a highly original aspect of the science of self-assembly Describes the novel methods of mechanical assembly used to fabricate a variety of new three-dimensional material structures in simple and cost-effective ways Provides simple insights to a number of biological systems and ...

Directed Self-Assembly of Nanodispersions

Energy Technology Data Exchange (ETDEWEB)

Furst, Eric M [University of Delaware

2013-11-15

Directed self-assembly promises to be the technologically and economically optimal approach to industrial-scale nanotechnology, and will enable the realization of inexpensive, reproducible and active nanostructured materials with tailored photonic, transport and mechanical properties. These new nanomaterials will play a critical role in meeting the 21st century grand challenges of the US, including energy diversity and sustainability, national security and economic competitiveness. The goal of this work was to develop and fundamentally validate methods of directed selfassembly of nanomaterials and nanodispersion processing. The specific aims were: 1. Nanocolloid self-assembly and interactions in AC electric fields. In an effort to reduce the particle sizes used in AC electric field self-assembly to lengthscales, we propose detailed characterizations of field-driven structures and studies of the fundamental underlying particle interactions. We will utilize microscopy and light scattering to assess order-disorder transitions and self-assembled structures under a variety of field and physicochemical conditions. Optical trapping will be used to measure particle interactions. These experiments will be synergetic with calculations of the particle polarizability, enabling us to both validate interactions and predict the order-disorder transition for nanocolloids. 2. Assembly of anisotropic nanocolloids. Particle shape has profound effects on structure and flow behavior of dispersions, and greatly complicates their processing and self-assembly. The methods developed to study the self-assembled structures and underlying particle interactions for dispersions of isotropic nanocolloids will be extended to systems composed of anisotropic particles. This report reviews several key advances that have been made during this project, including, (1) advances in the measurement of particle polarization mechanisms underlying field-directed self-assembly, and (2) progress in the

Inverse Problem in Self-assembly

Science.gov (United States)

Tkachenko, Alexei

2012-02-01

By decorating colloids and nanoparticles with DNA, one can introduce highly selective key-lock interactions between them. This leads to a new class of systems and problems in soft condensed matter physics. In particular, this opens a possibility to solve inverse problem in self-assembly: how to build an arbitrary desired structure with the bottom-up approach? I will present a theoretical and computational analysis of the hierarchical strategy in attacking this problem. It involves self-assembly of particular building blocks (``octopus particles''), that in turn would assemble into the target structure. On a conceptual level, our approach combines elements of three different brands of programmable self assembly: DNA nanotechnology, nanoparticle-DNA assemblies and patchy colloids. I will discuss the general design principles, theoretical and practical limitations of this approach, and illustrate them with our simulation results. Our crucial result is that not only it is possible to design a system that has a given nanostructure as a ground state, but one can also program and optimize the kinetic pathway for its self-assembly.

Robust, directed assembly of fluorescent nanodiamonds.

Science.gov (United States)

Kianinia, Mehran; Shimoni, Olga; Bendavid, Avi; Schell, Andreas W; Randolph, Steven J; Toth, Milos; Aharonovich, Igor; Lobo, Charlene J

2016-10-27

Arrays of fluorescent nanoparticles are highly sought after for applications in sensing, nanophotonics and quantum communications. Here we present a simple and robust method of assembling fluorescent nanodiamonds into macroscopic arrays. Remarkably, the yield of this directed assembly process is greater than 90% and the assembled patterns withstand ultra-sonication for more than three hours. The assembly process is based on covalent bonding of carboxyl to amine functional carbon seeds and is applicable to any material, and to non-planar surfaces. Our results pave the way to directed assembly of sensors and nanophotonics devices.

WHO: World Health Assembly.

Science.gov (United States)

McGregor, A

1992-05-23

1200 delegates from 175 member countries attended the 45th World Health Assembly in Geneva. Everyone at the Assembly ratified measures to prevent and control AIDS. 12 countries intended to do long term planning for community based care for AIDS patients. Further the Assembly denounced instances where countries and individuals denied the gravity of the AIDS pandemic. In fact, it expressed the importance for urgent and intensive action against HIV/AIDS. The assembly backed proposals to prevent and control sexually transmitted diseases that affect AIDS patients, especially hepatitis B. For example, in countries with hepatitis B prevalence 8% (many countries in Sub-Sahara Africa, Asia, the Pacific region, and South America), health officials should introduce hepatitis B vaccine into their existing immunization programs by 1995. By 1997, this vaccine should be part of all immunization programs. The Assembly was aware of the obstacles of establishing reliable cold chains for nationwide distribution, however. Delegates in Committee A objected to the fact that 50% of the populations of developing countries continued to have limited access to essential drugs. They also expressed disapproval in implementation of WHO's 1988 ethical criteria for promotion of drugs which WHO entrusted to the Council for International Organisations of Medical Sciences (CIOMS). CIOMS lacked WHO's status and thus could not effectively monitor drug advertising. In fact, the pharmaceutical industry as well as WHO provided the funds for a meeting of 25 experts to discuss principles included in the ethical criteria. At least 4 countries insisted that WHO have the ultimate authority in monitoring drug advertising. Delegates did adopt a compromise resolution on this topic which required that industry promotion methods be reported to the 1994 Assembly via the Executive Board. The Assembly requested WHO to establish an international advisory committee on nursing and midwifery and to improve the network of

Urban exports to the nonurban troposphere: Results from project MISTT

International Nuclear Information System (INIS)

White, W.H.; Patterson, D.E.; Wilson, W.E. Jr.

1983-01-01

An identifiable plume of contaminated air forms downwind of metropolitan St. Louis under certain conditions. The contribution of this urban plume to tropospheric ozone and aerosol loadings is calculated from concentration and wind fields measured during Project MISTT. On all three summer days selected for study, net ozone exports reached 2-3 x 10 6 g mol/h, or about 3/2 mole per mole of emitted nitrogen, within hours of emission. Conversion of sulfur dioxide to sulfate aerosol was incomplete at the distances sampled: it is estimated that haze exports ultimately reached 500--600 km 2 /h, or 8--9 m 2 per gram of emitted sulfur. Simple extrapolation of the yields observed at St. Louis indicates that anthropogenic inputs overwhelm natural contributions to ozone and aerosols over eastern North America

General Assembly

CERN Multimedia

Staff Association

2016-01-01

5th April, 2016 – Ordinary General Assembly of the Staff Association! In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, April 5th 2016 from 11:00 to 12:00 in BE Auditorium, Meyrin (6-2-024). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its financial management, and an opportunity to express one’s opinion, including taking part in the votes. Other points are listed on the agenda, as proposed by the Staff Council. Who can vote? Only “ordinary” members (MPE) of the SA can vote. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give his/her opinion? The Ordinary General Asse...

Nuclear reactor control assembly

International Nuclear Information System (INIS)

Negron, S.B.

1991-01-01

This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other

Apparatus for lifting spent fuel assembly

International Nuclear Information System (INIS)

Hirasawa, Yoshinari; Sato, Isao; Yoneda, Yoshiyuki.

1976-01-01

Object: To increase the efficiency of cooling of a used fuel assembly being moved within a guide tube in the axial direction thereof by directly cooling the assembly with cooling gas fed into the guide tube, thus facilitating the handling of the spent fuel assembly. Structure: An end of a lock portion is inserted into the top portion of a spent fuel assembly, the assembly being hooked on the lock portion. The lock portion is provided on its outer periphery with a seal member and a centering member and at its tip with a pawl capable of being projected and retracted in the radial direction. Thus, when the lock portion is moved along the guide tube, the used fuel assembly can be moved along the guide tube by maintaining the concentric relation thereto. Meanwhile, when cooling gas is fed into the guide tube, it is blown into the used fuel assembly to directly cool the same. Thus, the cooling efficiency can be increased. (Moriyama, M.)

Cooperative effects of fibronectin matrix assembly and initial cell-substrate adhesion strength in cellular self-assembly.

Science.gov (United States)

Brennan, James R; Hocking, Denise C

2016-03-01

The cell-dependent polymerization of intercellular fibronectin fibrils can stimulate cells to self-assemble into multicellular structures. The local physical cues that support fibronectin-mediated cellular self-assembly are largely unknown. Here, fibronectin matrix analogs were used as synthetic adhesive substrates to model cell-matrix fibronectin fibrils having different integrin-binding specificity, affinity, and/or density. We utilized this model to quantitatively assess the relationship between adhesive forces derived from cell-substrate interactions and the ability of fibronectin fibril assembly to induce cellular self-assembly. Results indicate that the strength of initial, rather than mature, cell-substrate attachments correlates with the ability of substrates to support fibronectin-mediated cellular self-assembly. The cellular response to soluble fibronectin was bimodal and independent of the integrin-binding specificity of the substrate; increasing soluble fibronectin levels above a critical threshold increased aggregate cohesion on permissive substrates. Once aggregates formed, continuous fibronectin polymerization was necessary to maintain cohesion. During self-assembly, soluble fibronectin decreased cell-substrate adhesion strength and induced aggregate cohesion via a Rho-dependent mechanism, suggesting that the balance of contractile forces derived from fibronectin fibrils within cell-cell versus cell-substrate adhesions controls self-assembly and aggregate cohesion. Thus, initial cell-substrate attachment strength may provide a quantitative basis with which to build predictive models of fibronectin-mediated microtissue fabrication on a variety of substrates. Cellular self-assembly is a process by which cells and extracellular matrix (ECM) proteins spontaneously organize into three-dimensional (3D) tissues in the absence of external forces. Cellular self-assembly can be initiated in vitro, and represents a potential tool for tissue engineers to

Biologic Constraints on Modelling Virus Assembly

Directory of Open Access Journals (Sweden)

Robert L. Garcea

2008-01-01

Full Text Available The mathematic modelling of icosahedral virus assembly has drawn increasing interest because of the symmetric geometry of the outer shell structures. Many models involve equilibrium expressions of subunit binding, with reversible subunit additions forming various intermediate structures. The underlying assumption is that a final lowest energy state drives the equilibrium toward assembly. In their simplest forms, these models have explained why high subunit protein concentrations and strong subunit association constants can result in kinetic traps forming off pathway partial and aberrant structures. However, the cell biology of virus assembly is exceedingly complex. The biochemistry and biology of polyoma and papillomavirus assembly described here illustrates many of these specific issues. Variables include the use of cellular ‘chaperone’ proteins as mediators of assembly fidelity, the coupling of assembly to encapsidation of a specific nucleic acid genome, the use of cellular structures as ‘workbenches’ upon which assembly occurs, and the underlying problem of making a capsid structure that is metastable and capable of rapid disassembly upon infection. Although formidable to model, incorporating these considerations could advance the relevance of mathematical models of virus assembly to the real world.

Self-assembled nanomaterials for photoacoustic imaging

Science.gov (United States)

Wang, Lei; Yang, Pei-Pei; Zhao, Xiao-Xiao; Wang, Hao

2016-01-01

In recent years, extensive endeavors have been paid to construct functional self-assembled nanomaterials for various applications such as catalysis, separation, energy and biomedicines. To date, different strategies have been developed for preparing nanomaterials with diversified structures and functionalities via fine tuning of self-assembled building blocks. In terms of biomedical applications, bioimaging technologies are urgently calling for high-efficient probes/contrast agents for high-performance bioimaging. Photoacoustic (PA) imaging is an emerging whole-body imaging modality offering high spatial resolution, deep penetration and high contrast in vivo. The self-assembled nanomaterials show high stability in vivo, specific tolerance to sterilization and prolonged half-life stability and desirable targeting properties, which is a kind of promising PA contrast agents for biomedical imaging. Herein, we focus on summarizing recent advances in smart self-assembled nanomaterials with NIR absorption as PA contrast agents for biomedical imaging. According to the preparation strategy of the contrast agents, the self-assembled nanomaterials are categorized into two groups, i.e., the ex situ and in situ self-assembled nanomaterials. The driving forces, assembly modes and regulation of PA properties of self-assembled nanomaterials and their applications for long-term imaging, enzyme activity detection and aggregation-induced retention (AIR) effect for diagnosis and therapy are emphasized. Finally, we conclude with an outlook towards future developments of self-assembled nanomaterials for PA imaging.

Self-assembled nanomaterials for photoacoustic imaging.

Science.gov (United States)

Wang, Lei; Yang, Pei-Pei; Zhao, Xiao-Xiao; Wang, Hao

2016-02-07

In recent years, extensive endeavors have been paid to construct functional self-assembled nanomaterials for various applications such as catalysis, separation, energy and biomedicines. To date, different strategies have been developed for preparing nanomaterials with diversified structures and functionalities via fine tuning of self-assembled building blocks. In terms of biomedical applications, bioimaging technologies are urgently calling for high-efficient probes/contrast agents for high-performance bioimaging. Photoacoustic (PA) imaging is an emerging whole-body imaging modality offering high spatial resolution, deep penetration and high contrast in vivo. The self-assembled nanomaterials show high stability in vivo, specific tolerance to sterilization and prolonged half-life stability and desirable targeting properties, which is a kind of promising PA contrast agents for biomedical imaging. Herein, we focus on summarizing recent advances in smart self-assembled nanomaterials with NIR absorption as PA contrast agents for biomedical imaging. According to the preparation strategy of the contrast agents, the self-assembled nanomaterials are categorized into two groups, i.e., the ex situ and in situ self-assembled nanomaterials. The driving forces, assembly modes and regulation of PA properties of self-assembled nanomaterials and their applications for long-term imaging, enzyme activity detection and aggregation-induced retention (AIR) effect for diagnosis and therapy are emphasized. Finally, we conclude with an outlook towards future developments of self-assembled nanomaterials for PA imaging.

Fuel cell sub-assembly

Science.gov (United States)

Chi, Chang V.

1983-01-01

A fuel cell sub-assembly comprising a plurality of fuel cells, a first section of a cooling means disposed at an end of the assembly and means for connecting the fuel cells and first section together to form a unitary structure.

Stochastic modeling of virus capsid assembly pathways

Science.gov (United States)

Schwartz, Russell

2009-03-01

Virus capsids have become a key model system for understanding self-assembly due to their high complexity, robust and efficient assembly processes, and experimental tractability. Our ability to directly examine and manipulate capsid assembly kinetics in detail nonetheless remains limited, creating a need for computer models that can infer experimentally inaccessible features of the assembly process and explore the effects of hypothetical manipulations on assembly trajectories. We have developed novel algorithms for stochastic simulation of capsid assembly [1,2] that allow us to model capsid assembly over broad parameter spaces [3]. We apply these methods to study the nature of assembly pathway control in virus capsids as well as their sensitivity to assembly conditions and possible experimental interventions. [4pt] [1] F. Jamalyaria, R. Rohlfs, and R. Schwartz. J Comp Phys 204, 100 (2005). [0pt] [2] N. Misra and R. Schwartz. J Chem Phys 129, in press (2008). [0pt] [3] B. Sweeney, T. Zhang, and R. Schwartz. Biophys J 94, 772 (2008).

Faucet: streaming de novo assembly graph construction.

Science.gov (United States)

Rozov, Roye; Goldshlager, Gil; Halperin, Eran; Shamir, Ron

2018-01-01

We present Faucet, a two-pass streaming algorithm for assembly graph construction. Faucet builds an assembly graph incrementally as each read is processed. Thus, reads need not be stored locally, as they can be processed while downloading data and then discarded. We demonstrate this functionality by performing streaming graph assembly of publicly available data, and observe that the ratio of disk use to raw data size decreases as coverage is increased. Faucet pairs the de Bruijn graph obtained from the reads with additional meta-data derived from them. We show these metadata-coverage counts collected at junction k-mers and connections bridging between junction pairs-contain most salient information needed for assembly, and demonstrate they enable cleaning of metagenome assembly graphs, greatly improving contiguity while maintaining accuracy. We compared Fauceted resource use and assembly quality to state of the art metagenome assemblers, as well as leading resource-efficient genome assemblers. Faucet used orders of magnitude less time and disk space than the specialized metagenome assemblers MetaSPAdes and Megahit, while also improving on their memory use; this broadly matched performance of other assemblers optimizing resource efficiency-namely, Minia and LightAssembler. However, on metagenomes tested, Faucet,o outputs had 14-110% higher mean NGA50 lengths compared with Minia, and 2- to 11-fold higher mean NGA50 lengths compared with LightAssembler, the only other streaming assembler available. Faucet is available at https://github.com/Shamir-Lab/Faucet. rshamir@tau.ac.il or eranhalperin@gmail.com. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press.

Nuclear reactor fuel assembly

International Nuclear Information System (INIS)

Sakurai, Shungo; Ogiya, Shunsuke.

1990-01-01

In a fuel assembly, if the entire fuels comprise mixed oxide fuels, reactivity change in cold temperature-power operation is increased to worsen the reactor shutdown margin. The reactor shutdown margin has been improved by increasing the burnable poison concentration thereby reducing the reactivity of the fuel assembly. However, since unburnt poisons are present at the completion of the reactor operation, the reactivity can not be utilized effectively to bring about economical disadvantage. In view of the above, the reactivity change between lower temperature-power operations is reduced by providing a non-boiling range with more than 9.1% of cross sectional area at the inside of a channel at the central portion of the fuel assembly. As a result, the amount of the unburnt burnable poisons is decreased, the economy of fuel assembly is improved and the reactor shutdown margin can be increase. (N.H.)

Liquid-liquid interfacial nanoparticle assemblies

Science.gov (United States)

Emrick, Todd S [South Deerfield, MA; Russell, Thomas P [Amherst, MA; Dinsmore, Anthony [Amherst, MA; Skaff, Habib [Amherst, MA; Lin, Yao [Amherst, MA

2008-12-30

Self-assembly of nanoparticles at the interface between two fluids, and methods to control such self-assembly process, e.g., the surface density of particles assembling at the interface; to utilize the assembled nanoparticles and their ligands in fabrication of capsules, where the elastic properties of the capsules can be varied from soft to tough; to develop capsules with well-defined porosities for ultimate use as delivery systems; and to develop chemistries whereby multiple ligands or ligands with multiple functionalities can be attached to the nanoparticles to promote the interfacial segregation and assembly of the nanoparticles. Certain embodiments use cadmium selenide (CdSe) nanoparticles, since the photoluminescence of the particles provides a convenient means by which the spatial location and organization of the particles can be probed. However, the systems and methodologies presented here are general and can, with suitable modification of the chemistries, be adapted to any type of nanoparticle.

SolidWorks 2011 Assemblies Bible

CERN Document Server

Lombard, Matt

2011-01-01

A fan of the SolidWorks Bible, but want more detail on assemblies? Here you go. SolidWorks fans have long sought more detail on SolidWorks topics, and now you have it. We took our popular SolidWorks Bible, divided it into two books (SolidWorks 2011 Assemblies Bible and SolidWorks 2011 Parts Bible) and packed each new book with a host of items from your wish lists, such as more extensive coverage of the basics, additional tutorials, and expanded coverage of topics largely ignored by other books. This SolidWorks 2011 Assemblies Bible shows you how to organize parts data to create assemblies or s

Seismic behaviour of fuel assembly

Energy Technology Data Exchange (ETDEWEB)

Song, Heuy Gap; Jhung, Myung Jo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1993-11-01

A general approach for the dynamic time-history analysis of the reactor core is presented in this paper as a part of the fuel assembly qualification program. Several detailed core models are set up to reflect the placement of the fuel assemblies within the core shroud. Peak horizontal responses are obtained for each model for the motions induced from earthquake. The dynamic responses such as fuel assembly shear force, bending moment and displacement, and spacer grid impact loads are carefully investigated. Also, the sensitivity responses are obtained for the earthquake motions and the fuel assembly non-linear response characteristics are discussed. (Author) 9 refs., 24 figs., 1 tab.

Airfoil nozzle and shroud assembly

Science.gov (United States)

Shaffer, J.E.; Norton, P.F.

1997-06-03

An airfoil and nozzle assembly are disclosed including an outer shroud having a plurality of vane members attached to an inner surface and having a cantilevered end. The assembly further includes a inner shroud being formed by a plurality of segments. Each of the segments having a first end and a second end and having a recess positioned in each of the ends. The cantilevered end of the vane member being positioned in the recess. The airfoil and nozzle assembly being made from a material having a lower rate of thermal expansion than that of the components to which the airfoil and nozzle assembly is attached. 5 figs.

Perceived Benefits of Participation and Risks of Soil Contamination in St. Louis Urban Community Gardens.

Science.gov (United States)

Wong, Roger; Gable, Leah; Rivera-Núñez, Zorimar

2018-06-01

Community gardens are credited for promoting health within neighborhoods, by increasing healthy food intake and exercise frequency. These benefits, however, are potentially undermined as urban soils are often contaminated from industrial legacies. The purpose of this study was to examine the perceived benefits of participation and risks of soil contamination within urban community gardens, and factors associated with soil contamination concerns. Ninety-three gardeners were interviewed across 20 community gardens in St. Louis, Missouri between June and August 2015. Surveys included questions on demographics, gardening practices, and perceptions of community gardening. Multilevel logistic models assessed how gardener demographics, gardening practices, and garden characteristics were associated with soil contamination concerns. Common perceived benefits of community gardening were community building (68.8%), healthy and fresh food (35.5%), and gardening education (18.3%). Most gardeners (62.4%) were not concerned about soil contamination, but nearly half (48.4%) stated concerns about heavy metals. Black race was significantly associated with soil contamination concerns (OR 5.47, 95% CI 1.00-30.15, p = .04). Community gardens offer numerous social and health benefits. Although most gardeners were not concerned about soil contamination, black gardeners were more likely to have concerns. Garden leaders should provide resources to gardeners to learn about soil contamination and methods to manage their risk, particularly in minority neighborhoods.

Capacitor assembly and related method of forming

Science.gov (United States)

Zhang, Lili; Tan, Daniel Qi; Sullivan, Jeffrey S.

2017-12-19

A capacitor assembly is disclosed. The capacitor assembly includes a housing. The capacitor assembly further includes a plurality of capacitors disposed within the housing. Furthermore, the capacitor assembly includes a thermally conductive article disposed about at least a portion of a capacitor body of the capacitors, and in thermal contact with the capacitor body. Moreover, the capacitor assembly also includes a heat sink disposed within the housing and in thermal contact with at least a portion of the housing and the thermally conductive article such that the heat sink is configured to remove heat from the capacitor in a radial direction of the capacitor assembly. Further, a method of forming the capacitor assembly is also presented.

Gas separation membrane module assembly

Science.gov (United States)

Wynn, Nicholas P [Palo Alto, CA; Fulton, Donald A [Fairfield, CA

2009-03-31

A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

Comparing de novo assemblers for 454 transcriptome data.

Science.gov (United States)

Kumar, Sujai; Blaxter, Mark L

2010-10-16

Roche 454 pyrosequencing has become a method of choice for generating transcriptome data from non-model organisms. Once the tens to hundreds of thousands of short (250-450 base) reads have been produced, it is important to correctly assemble these to estimate the sequence of all the transcripts. Most transcriptome assembly projects use only one program for assembling 454 pyrosequencing reads, but there is no evidence that the programs used to date are optimal. We have carried out a systematic comparison of five assemblers (CAP3, MIRA, Newbler, SeqMan and CLC) to establish best practices for transcriptome assemblies, using a new dataset from the parasitic nematode Litomosoides sigmodontis. Although no single assembler performed best on all our criteria, Newbler 2.5 gave longer contigs, better alignments to some reference sequences, and was fast and easy to use. SeqMan assemblies performed best on the criterion of recapitulating known transcripts, and had more novel sequence than the other assemblers, but generated an excess of small, redundant contigs. The remaining assemblers all performed almost as well, with the exception of Newbler 2.3 (the version currently used by most assembly projects), which generated assemblies that had significantly lower total length. As different assemblers use different underlying algorithms to generate contigs, we also explored merging of assemblies and found that the merged datasets not only aligned better to reference sequences than individual assemblies, but were also more consistent in the number and size of contigs. Transcriptome assemblies are smaller than genome assemblies and thus should be more computationally tractable, but are often harder because individual contigs can have highly variable read coverage. Comparing single assemblers, Newbler 2.5 performed best on our trial data set, but other assemblers were closely comparable. Combining differently optimal assemblies from different programs however gave a more credible

3D Programmable Micro Self Assembly

National Research Council Canada - National Science Library

Bohringer, Karl F; Parviz, Babak A; Klavins, Eric

2005-01-01

.... We have developed a "self assembly tool box" consisting of a range of methods for micro-scale self-assembly in 2D and 3D We have shown physical demonstrations of simple 3D self-assemblies which lead...

A comparative evaluation of genome assembly reconciliation tools.

Science.gov (United States)

Alhakami, Hind; Mirebrahim, Hamid; Lonardi, Stefano

2017-05-18

The majority of eukaryotic genomes are unfinished due to the algorithmic challenges of assembling them. A variety of assembly and scaffolding tools are available, but it is not always obvious which tool or parameters to use for a specific genome size and complexity. It is, therefore, common practice to produce multiple assemblies using different assemblers and parameters, then select the best one for public release. A more compelling approach would allow one to merge multiple assemblies with the intent of producing a higher quality consensus assembly, which is the objective of assembly reconciliation. Several assembly reconciliation tools have been proposed in the literature, but their strengths and weaknesses have never been compared on a common dataset. We fill this need with this work, in which we report on an extensive comparative evaluation of several tools. Specifically, we evaluate contiguity, correctness, coverage, and the duplication ratio of the merged assembly compared to the individual assemblies provided as input. None of the tools we tested consistently improved the quality of the input GAGE and synthetic assemblies. Our experiments show an increase in contiguity in the consensus assembly when the original assemblies already have high quality. In terms of correctness, the quality of the results depends on the specific tool, as well as on the quality and the ranking of the input assemblies. In general, the number of misassemblies ranges from being comparable to the best of the input assembly to being comparable to the worst of the input assembly.

Magnetic scanning of LWR fuel assemblies

International Nuclear Information System (INIS)

Fiarman, S.; Moodenbaugh, A.

1980-01-01

Nondestructive assay (NDA) techniques are available both for fresh and spent fuel, but generally are too time consuming and do not uniquely identify an assembly. A new method is reported to obtain a signature from a magnetic scan of each assembly. This scan is an NDA technique that detects magnetic inclusions. It is potentially fast (5 min/assembly), and may provide a unique signature from the magnetic properties of each fuel assembly

QUAST: quality assessment tool for genome assemblies.

Science.gov (United States)

Gurevich, Alexey; Saveliev, Vladislav; Vyahhi, Nikolay; Tesler, Glenn

2013-04-15

Limitations of genome sequencing techniques have led to dozens of assembly algorithms, none of which is perfect. A number of methods for comparing assemblers have been developed, but none is yet a recognized benchmark. Further, most existing methods for comparing assemblies are only applicable to new assemblies of finished genomes; the problem of evaluating assemblies of previously unsequenced species has not been adequately considered. Here, we present QUAST-a quality assessment tool for evaluating and comparing genome assemblies. This tool improves on leading assembly comparison software with new ideas and quality metrics. QUAST can evaluate assemblies both with a reference genome, as well as without a reference. QUAST produces many reports, summary tables and plots to help scientists in their research and in their publications. In this study, we used QUAST to compare several genome assemblers on three datasets. QUAST tables and plots for all of them are available in the Supplementary Material, and interactive versions of these reports are on the QUAST website. http://bioinf.spbau.ru/quast . Supplementary data are available at Bioinformatics online.

Power module assembly

Science.gov (United States)

Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

2011-11-15

A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

Where is North?

OpenAIRE

Macmillan, Susan; Shanahan, Tom

2010-01-01

To find your way using a magnetic compass with a map, you need to know the difference between magnetic north and map north. This difference is called ‘grid magnetic angle’, and in the UK it is derived from a model of the Earth’s magnetic field, which is updated every year. The variation To go north, you just follow your compass towards magnetic north, right? Not quite. Geophysicists have to work hard so we can continue to navigate with map and compass. Susan Macm...

Method of transporting fuel assemblies

International Nuclear Information System (INIS)

Okada, Katsutoshi.

1979-01-01

Purpose: To enable safety transportation of fuel assemblies for FBR type reactors by surrounding each of fuel elements in a wrapper tube by a rubbery, hollow cylindrical container and by sealing medium such as air to the inside of the container. Method: A fuel element is contained in a hollow cylindrical rubber-like tube. The fuel element has an upper end plug, a lower end plug and a wire spirally wound around the outer periphery. Upon transportation of the fuel assemblies, each of the fuel elements is covered with the container and arranged in the wrapper tube and then the fuel assemblies are assembled. Then, medium such as air is sealed for each of the fuel elements by way of an opening and then the opening is tightly closed. Before loading the transported fuel assemblies in the reactor, the medium is discharged through the opening and the container is completely extracted and removed from the inside of the wrapper tube. (Seki, T.)

Modular fuel-cell stack assembly

Science.gov (United States)

Patel, Pinakin

2010-07-13

A fuel cell assembly having a plurality of fuel cells arranged in a stack. An end plate assembly abuts the fuel cell at an end of said stack. The end plate assembly has an inlet area adapted to receive an exhaust gas from the stack, an outlet area and a passage connecting the inlet area and outlet area and adapted to carry the exhaust gas received at the inlet area from the inlet area to the outlet area. A further end plate assembly abuts the fuel cell at a further opposing end of the stack. The further end plate assembly has a further inlet area adapted to receive a further exhaust gas from the stack, a further outlet area and a further passage connecting the further inlet area and further outlet area and adapted to carry the further exhaust gas received at the further inlet area from the further inlet area to the further outlet area.

Nuclear reactor spacer assembly

International Nuclear Information System (INIS)

Anthony, A.J.; Groves, M.D.

1979-01-01

A fuel assembly for a nuclear reactor is disclosed wherein the fuel element receiving and supporting grid is comprised of a first metal, the guide tubes which pass through the grid assembly are comprised of a second metal and the grid is supported on the guide tubes by means of expanded sleeves located intermediate the grid and guide tubes. The fuel assembly is fabricated by inserting the sleeves, of initial outer diameter commensurate with the guide tube outer diameters, through the holes in the grid assembly provided for the guide tubes and thereafter expanding the sleeves radially outwardly along their entire length such that the guide tubes can subsequently be passed through the sleeves. The step of radial expansion, as a result of windows provided in the sleeves having dimensions commensurate with the geometry of the grid, mechanically captures the grid and simultaneously preloads the sleeve against the grid whereby relative motion between the grid and guide tube will be precluded

Automated ensemble assembly and validation of microbial genomes

Science.gov (United States)

2014-01-01

Background The continued democratization of DNA sequencing has sparked a new wave of development of genome assembly and assembly validation methods. As individual research labs, rather than centralized centers, begin to sequence the majority of new genomes, it is important to establish best practices for genome assembly. However, recent evaluations such as GAGE and the Assemblathon have concluded that there is no single best approach to genome assembly. Instead, it is preferable to generate multiple assemblies and validate them to determine which is most useful for the desired analysis; this is a labor-intensive process that is often impossible or unfeasible. Results To encourage best practices supported by the community, we present iMetAMOS, an automated ensemble assembly pipeline; iMetAMOS encapsulates the process of running, validating, and selecting a single assembly from multiple assemblies. iMetAMOS packages several leading open-source tools into a single binary that automates parameter selection and execution of multiple assemblers, scores the resulting assemblies based on multiple validation metrics, and annotates the assemblies for genes and contaminants. We demonstrate the utility of the ensemble process on 225 previously unassembled Mycobacterium tuberculosis genomes as well as a Rhodobacter sphaeroides benchmark dataset. On these real data, iMetAMOS reliably produces validated assemblies and identifies potential contamination without user intervention. In addition, intelligent parameter selection produces assemblies of R. sphaeroides comparable to or exceeding the quality of those from the GAGE-B evaluation, affecting the relative ranking of some assemblers. Conclusions Ensemble assembly with iMetAMOS provides users with multiple, validated assemblies for each genome. Although computationally limited to small or mid-sized genomes, this approach is the most effective and reproducible means for generating high-quality assemblies and enables users to

Storage arrangement for nuclear reactor fuel assemblies

International Nuclear Information System (INIS)

Wade, E.E.

1977-01-01

Said invention is intended for providing an arrangement of spent fuel assembly storage inside which the space is efficiently used without accumulating a critical mass. The storage is provided for long fuel assemblies having along their longitudinal axis an active part containing the fuel and an inactive part empty of fuel. Said storage arrangement comprises a framework constituting some long-shaped cells designed so as each of them can receive a fuel assembly. Means of axial positioning of said assembly in a cell make it possible to support the fuel assemblies inside the framework according to a spacing ratio, along the cell axis, such as the active part of an assembly is adjacent to the inactive part of the adjacent assemblies [fr

Integral nuclear fuel element assembly

International Nuclear Information System (INIS)

Schluderberg, D. C.

1985-01-01

An integral nuclear fuel element assembly utilizes longitudinally finned fuel pins. The continuous or interrupted fins of the fuel pins are brazed to fins of juxtaposed fuel pins or directly to the juxtaposed fuel pins or both. The integrally brazed fuel assembly is designed to satisfy the thermal and hydraulic requirements of a fuel assembly lattice having moderator to fuel atom ratios required to achieve high conversion and breeding ratios

Centrioles: Some Self-Assembly Required

OpenAIRE

Song, Mi Hye; Miliaras, Nicholas B.; Peel, Nina; O'Connell, Kevin F.

2008-01-01

Centrioles play an important role in organizing microtubules and are precisely duplicated once per cell cycle. New (daughter) centrioles typically arise in association with existing (mother) centrioles (canonical assembly), suggesting that mother centrioles direct the formation of daughter centrioles. However, under certain circumstances, centrioles can also self-assemble free of an existing centriole (de novo assembly). Recent work indicates that the canonical and de novo pathways utilize a ...

Occupational Contact Dermatitis in North American Production Workers Referred for Patch Testing: Retrospective Analysis of Cross-Sectional Data From the North American Contact Dermatitis Group 1998 to 2014.

Science.gov (United States)

Warshaw, Erin M; Hagen, Solveig L; DeKoven, Joel G; Zug, Kathryn A; Sasseville, Denis; Belsito, Donald V; Zirwas, Matthew J; Fowler, Joseph F; Taylor, James S; Fransway, Anthony F; DeLeo, Vincent A; Marks, James G; Pratt, Melanie D; Maibach, Howard I; Mathias, C G Toby

Little is known about the epidemiology of contact dermatitis in production workers (PWs). The aims of this study were to estimate the prevalence of contact dermatitis and characterize clinically relevant and occupationally related allergens among North American PWs undergoing patch testing. This was a retrospective cross-sectional analysis of North American Contact Dermatitis Group data from 1998 to 2014. Of 39,332 patch-tested patients, 2732 (7.0%) were PWs. Among PWs, most were men (62.4%) and white (83.9%). A history of childhood eczema was uncommon (11.3%). Prevalent occupations included machine operators (27.3%); fabricators, assemblers, and hand-working occupations (16.8%); and precision metalworking occupations (16.1%). The most frequent sites of dermatitis were the hands (53.8%) and arms (29.4%), which were significantly more commonly affected compared with non-PWs (P contact dermatitis, and irritant contact dermatitis were also significantly more common in PWs (49.9% vs 10.6%, 58.9% vs 53.7%, and 32.7% vs 25.7%, respectively; all Ps contact dermatitis. Involvement of exposed body areas was common. Frequently identified allergens included adhesives/glues, rubber accelerators, metals, and preservatives.

Assembly of the PLT device

International Nuclear Information System (INIS)

Marino, R.

1975-11-01

The assembly of the PLT device began in June 1974 with a preassembly of the mechanical structure at a remote site. The preassembly sequence incorporated final fabrication procedures with an initial staging operation. This successful staging/fabrication procedure proved to be an invaluable asset when the final assembly was started in August 1974. The assembly continued with the initial reassembly of the previously tested structural components at the final machine site. Construction was interrupted at several points to allow for toroidal field coil, vacuum vessel, and poloidal coil installation. Two phases of toroidal field coil power tests were included in the assembly sequence prior to, and just after the vacuum vessel insertion

PAVE: Program for assembling and viewing ESTs

Directory of Open Access Journals (Sweden)

Bomhoff Matthew

2009-08-01

Full Text Available Abstract Background New sequencing technologies are rapidly emerging. Many laboratories are simultaneously working with the traditional Sanger ESTs and experimenting with ESTs generated by the 454 Life Science sequencers. Though Sanger ESTs have been used to generate contigs for many years, no program takes full advantage of the 5' and 3' mate-pair information, hence, many tentative transcripts are assembled into two separate contigs. The new 454 technology has the benefit of high-throughput expression profiling, but introduces time and space problems for assembling large contigs. Results The PAVE (Program for Assembling and Viewing ESTs assembler takes advantage of the 5' and 3' mate-pair information by requiring that the mate-pairs be assembled into the same contig and joined by n's if the two sub-contigs do not overlap. It handles the depth of 454 data sets by "burying" similar ESTs during assembly, which retains the expression level information while circumventing time and space problems. PAVE uses MegaBLAST for the clustering step and CAP3 for assembly, however it assembles incrementally to enforce the mate-pair constraint, bury ESTs, and reduce incorrect joins and splits. The PAVE data management system uses a MySQL database to store multiple libraries of ESTs along with their metadata; the management system allows multiple assemblies with variations on libraries and parameters. Analysis routines provide standard annotation for the contigs including a measure of differentially expressed genes across the libraries. A Java viewer program is provided for display and analysis of the results. Our results clearly show the benefit of using the PAVE assembler to explicitly use mate-pair information and bury ESTs for large contigs. Conclusion The PAVE assembler provides a software package for assembling Sanger and/or 454 ESTs. The assembly software, data management software, Java viewer and user's guide are freely available.

PAVE: program for assembling and viewing ESTs.

Science.gov (United States)

Soderlund, Carol; Johnson, Eric; Bomhoff, Matthew; Descour, Anne

2009-08-26

New sequencing technologies are rapidly emerging. Many laboratories are simultaneously working with the traditional Sanger ESTs and experimenting with ESTs generated by the 454 Life Science sequencers. Though Sanger ESTs have been used to generate contigs for many years, no program takes full advantage of the 5' and 3' mate-pair information, hence, many tentative transcripts are assembled into two separate contigs. The new 454 technology has the benefit of high-throughput expression profiling, but introduces time and space problems for assembling large contigs. The PAVE (Program for Assembling and Viewing ESTs) assembler takes advantage of the 5' and 3' mate-pair information by requiring that the mate-pairs be assembled into the same contig and joined by n's if the two sub-contigs do not overlap. It handles the depth of 454 data sets by "burying" similar ESTs during assembly, which retains the expression level information while circumventing time and space problems. PAVE uses MegaBLAST for the clustering step and CAP3 for assembly, however it assembles incrementally to enforce the mate-pair constraint, bury ESTs, and reduce incorrect joins and splits. The PAVE data management system uses a MySQL database to store multiple libraries of ESTs along with their metadata; the management system allows multiple assemblies with variations on libraries and parameters. Analysis routines provide standard annotation for the contigs including a measure of differentially expressed genes across the libraries. A Java viewer program is provided for display and analysis of the results. Our results clearly show the benefit of using the PAVE assembler to explicitly use mate-pair information and bury ESTs for large contigs. The PAVE assembler provides a software package for assembling Sanger and/or 454 ESTs. The assembly software, data management software, Java viewer and user's guide are freely available.

Technical operations procedure for assembly and emplacement of the soil temperature test--test assembly

International Nuclear Information System (INIS)

Weber, A.P.

1978-01-01

A description is given of the plan for assembly, instrumentation, emplacement, and operational checkout of the soil temperature test assembly and dry well liner. The activities described cover all operations necessary to accomplish the receiving inspection, instrumentation and pre-construction handling of the dry well liner, plus all operations performed with the test article. Actual details of construction work are not covered by this procedure. Each part and/or section of this procedure is a separate function to be accomplished as required by the nature of the operation. The organization of the procedure is not intended to imply a special operational sequence or schedular requirement. Specific procedure operational sections include: receiving inspection; liner assembly operations; construction operations (by others); prepare shield plug; test article assembly and installation; and operational checkout

Comparing de novo assemblers for 454 transcriptome data

Directory of Open Access Journals (Sweden)

Blaxter Mark L

2010-10-01

Full Text Available Abstract Background Roche 454 pyrosequencing has become a method of choice for generating transcriptome data from non-model organisms. Once the tens to hundreds of thousands of short (250-450 base reads have been produced, it is important to correctly assemble these to estimate the sequence of all the transcripts. Most transcriptome assembly projects use only one program for assembling 454 pyrosequencing reads, but there is no evidence that the programs used to date are optimal. We have carried out a systematic comparison of five assemblers (CAP3, MIRA, Newbler, SeqMan and CLC to establish best practices for transcriptome assemblies, using a new dataset from the parasitic nematode Litomosoides sigmodontis. Results Although no single assembler performed best on all our criteria, Newbler 2.5 gave longer contigs, better alignments to some reference sequences, and was fast and easy to use. SeqMan assemblies performed best on the criterion of recapitulating known transcripts, and had more novel sequence than the other assemblers, but generated an excess of small, redundant contigs. The remaining assemblers all performed almost as well, with the exception of Newbler 2.3 (the version currently used by most assembly projects, which generated assemblies that had significantly lower total length. As different assemblers use different underlying algorithms to generate contigs, we also explored merging of assemblies and found that the merged datasets not only aligned better to reference sequences than individual assemblies, but were also more consistent in the number and size of contigs. Conclusions Transcriptome assemblies are smaller than genome assemblies and thus should be more computationally tractable, but are often harder because individual contigs can have highly variable read coverage. Comparing single assemblers, Newbler 2.5 performed best on our trial data set, but other assemblers were closely comparable. Combining differently optimal assemblies

Transfer of fuel assemblies

International Nuclear Information System (INIS)

Vuckovich, M.; Burkett, J. P.; Sallustio, J.

1984-01-01

Fuel assemblies of a nuclear reactor are transferred during fueling or refueling or the like by a crane. The work-engaging fixture of the crane picks up an assembly, removes it from this slot, transfers it to the deposit site and deposits it in its slot at the deposit site. The control for the crane includes a strain gauge connected to the crane line which raises and lowers the load. The strain gauge senses the load on the crane. The signal from the strain gauge is compared with setpoints; a high-level setpoint, a low-level setpoint and a slack-line setpoint. If the strain gauge signal exceeds the high-level setpoint, the line drive is disabled. This event may occur during raising of a fuel assembly which encounters resistance. The high-level setpoint may be overridden under proper precautions. The line drive is also disabled if the strain gauge signal is less than the low-level setpoint. This event occurs when a fuel assembly being deposited contacts the bottom of its slot or an obstruction in, or at the entry to the slot. To preclude lateral movement and possible damage to a fuel assembly suspended from the crane line, the traverse drive of the crane is disabled once the strain-gauge exceets the lov-level setpoint. The traverse drive can only be enabled after the strain-gauge signal is less than the slack-line set-point. This occurs when the lines has been set in slack-line setting. When the line is tensioned after slack-li ne setting, the traverse drive remains enabled only if the line has been disconnected from the fuel assembly

Improvements in nuclear fuel assembly sleeves

International Nuclear Information System (INIS)

Eaton, C.W.; Seeley, T.A.; Ince, G.; Speakman, W.T.

1986-01-01

The graphite sleeve of a nuclear fuel assembly or reflector element for a stringer mounts a number of grids via mounting assemblies installed in grooves formed in the interior wall surface of the sleeve. The bore of the sleeve is of reduced cross-section between two successive grooves such that the internal diameter of the sleeve is substantially the same as the inner diameter of the radially innermost extremity of the mounting assemblies whereby the coolant pressure loss at each transition between the reduced diameter bore section and the mounting assemblies is reduced. Each mounting assembly may be of radially contractable split ring construction to permit its placement in the groove and may carry burnable poison material. (author)

Improvements in nuclear fuel assembly sleeves

Energy Technology Data Exchange (ETDEWEB)

Eaton, C.W.; Seeley, T.A.; Ince, G.; Speakman, W.T.

1986-02-26

The graphite sleeve of a nuclear fuel assembly or reflector element for a stringer mounts a number of grids via mounting assemblies installed in grooves formed in the interior wall surface of the sleeve. The bore of the sleeve is of reduced cross-section between two successive grooves such that the internal diameter of the sleeve is substantially the same as the inner diameter of the radially innermost extremity of the mounting assemblies whereby the coolant pressure loss at each transition between the reduced diameter bore section and the mounting assemblies is reduced. Each mounting assembly may be of radially contractable split ring construction to permit its placement in the groove and may carry burnable poison material.

Physical principles for DNA tile self-assembly.

Science.gov (United States)

Evans, Constantine G; Winfree, Erik

2017-06-19

DNA tiles provide a promising technique for assembling structures with nanoscale resolution through self-assembly by basic interactions rather than top-down assembly of individual structures. Tile systems can be programmed to grow based on logical rules, allowing for a small number of tile types to assemble large, complex assemblies that can retain nanoscale resolution. Such algorithmic systems can even assemble different structures using the same tiles, based on inputs that seed the growth. While programming and theoretical analysis of tile self-assembly often makes use of abstract logical models of growth, experimentally implemented systems are governed by nanoscale physical processes that can lead to very different behavior, more accurately modeled by taking into account the thermodynamics and kinetics of tile attachment and detachment in solution. This review discusses the relationships between more abstract and more physically realistic tile assembly models. A central concern is how consideration of model differences enables the design of tile systems that robustly exhibit the desired abstract behavior in realistic physical models and in experimental implementations. Conversely, we identify situations where self-assembly in abstract models can not be well-approximated by physically realistic models, putting constraints on physical relevance of the abstract models. To facilitate the discussion, we introduce a unified model of tile self-assembly that clarifies the relationships between several well-studied models in the literature. Throughout, we highlight open questions regarding the physical principles for DNA tile self-assembly.

System for assembling nuclear fuel elements

International Nuclear Information System (INIS)

1980-01-01

An automatic system is described for assembling nuclear fuel elements, in particular those employing mixed oxide fuels. The system includes a sealing mechanism which allows movement during the assembling of the fuel element along the assembly stations without excessive release of contaminants. (U.K.)

Assembly study for JT-60SA tokamak

Energy Technology Data Exchange (ETDEWEB)

Shibanuma, K., E-mail: shibanuma.kiyoshi@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Arai, T.; Hasegawa, K.; Hoshi, R.; Kamiya, K.; Kawashima, H.; Kubo, H.; Masaki, K.; Saeki, H.; Sakurai, S.; Sakata, S.; Sakasai, A.; Sawai, H.; Shibama, Y.K.; Tsuchiya, K.; Tsukao, N.; Yagyu, J.; Yoshida, K.; Kamada, Y. [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Mizumaki, S. [Toshiba Corporation, Minato-ku, Tokyo 105-8001 (Japan); and others

2013-10-15

The assembly scenarios and assembly tools of the major tokamak components for JT-60SA are studied in the following. (1) The assembly frame (with a dedicated 30-tonne crane), which is located around the JT-60SA tokamak, is adopted for effective assembly works in the torus hall and the temporary support of the components during assembly. (2) Metrology for precise positioning of the components is also studied by defining the metrology points on the components. (3) The sector segmentation for weld joints and positioning of the vacuum vessel (VV), the assembly scenario and tools for VV thermal shield (TS), the connection of the outer intercoil structure (OIS) and the installation of the final toroidal field coil (TFC) are studied, as typical examples of the assembly scenarios and tools for JT-60SA.

Assemble-to-order systems: a review

NARCIS (Netherlands)

Atan, Z.; Ahmadi, T.; Stegehuis, C.; de Kok, A.G.; Adan, I.J.B.F.

2017-01-01

In this paper, we review the recent literature on assemble-to-order systems. Each assemble-to-order system consists of multiple components and end-products. The components are assembled into the end-products after information on customer demand is received but the decision on what components to

A conceptual design and structural stabilities of in-pit assembly tools for the completion of final sector assembly at tokamak hall

International Nuclear Information System (INIS)

Nam, K.O.; Park, H.K.; Kim, D.J.; Ahn, H.J.; Kim, K.K.; Im, K.; Shaw, R.

2010-01-01

The final assembly of main components of the International Thermonuclear Experimental Reactor (ITER) tokamak, Vacuum Vessel (VV) and Toroidal Field Coils (TFCs), is achieved by the sequential assembly of the nine sub-assembled 40 o sectors in tokamak pit. Each sub-assembled 40 o sector is composed of one VV 40 o sector, two TFCs, and in-between Vacuum Vessel Thermal Shield (VVTS) segments. Sub-assembly is carried out in the assembly building and then the sub-assembled sectors are transferred into tokamak pit, in sequence, to complete sector assembly. The role of in-pit assembly tool is to support and align the sub-assembled sectors in tokamak pit. It also plays the role of reference datum during assembly until the completion of main components assembly. Korea Domestic Agency (KO DA) has developed the conceptual design of most ITER purpose-built assembly tools under the collaboration with the ITER Organization. Among the conceptual designs carried out, this paper describes the function, the structure, the selected material and the design results of the in-pit assembly tools comprising central column, radial beams and their supports, TF inner supports and in-pit working floor. The results of structural analysis using ANSYS for the various loading cases are given as well. The resultant stresses and deflections turned out to fall within the allowable ranges.

Quantifying quality in DNA self-assembly

Science.gov (United States)

Wagenbauer, Klaus F.; Wachauf, Christian H.; Dietz, Hendrik

2014-01-01

Molecular self-assembly with DNA is an attractive route for building nanoscale devices. The development of sophisticated and precise objects with this technique requires detailed experimental feedback on the structure and composition of assembled objects. Here we report a sensitive assay for the quality of assembly. The method relies on measuring the content of unpaired DNA bases in self-assembled DNA objects using a fluorescent de-Bruijn probe for three-base ‘codons’, which enables a comparison with the designed content of unpaired DNA. We use the assay to measure the quality of assembly of several multilayer DNA origami objects and illustrate the use of the assay for the rational refinement of assembly protocols. Our data suggests that large and complex objects like multilayer DNA origami can be made with high strand integration quality up to 99%. Beyond DNA nanotechnology, we speculate that the ability to discriminate unpaired from paired nucleic acids in the same macromolecule may also be useful for analysing cellular nucleic acids. PMID:24751596

The MARVEL assembly for neutron multiplication

Energy Technology Data Exchange (ETDEWEB)

David L. Chichester; Mathew T. Kinlaw

2013-10-01

A new multiplying test assembly is under development at Idaho National Laboratory to support research, validation, evaluation, and learning. The item is comprised of three stacked, highly-enriched uranium (HEU) cylinders, each 11.4 cm in diameter and having a combined height of up to 11.7 cm. The combined mass of all three cylinders is 20.3 kg of HEU. Calculations for the bare configuration of the assembly indicate a multiplication level of >3.5 (keff=0.72). Reflected configurations of the assembly, using either polyethylene or tungsten, are possible and have the capability of raising the assembly's multiplication level to greater than 10. This paper describes simulations performed to assess the assembly's multiplication level under different conditions and describes the resources available at INL to support the use of these materials. We also describe some preliminary calculations and test activities using the assembly to study neutron multiplication.

The MARVEL assembly for neutron multiplication.

Science.gov (United States)

Chichester, David L; Kinlaw, Mathew T

2013-10-01

A new multiplying test assembly is under development at Idaho National Laboratory to support research, validation, evaluation, and learning. The item is comprised of three stacked, highly-enriched uranium (HEU) cylinders, each 11.4 cm in diameter and having a combined height of up to 11.7 cm. The combined mass of all three cylinders is 20.3 kg of HEU. Calculations for the bare configuration of the assembly indicate a multiplication level of >3.5 (k(eff)=0.72). Reflected configurations of the assembly, using either polyethylene or tungsten, are possible and have the capability of raising the assembly's multiplication level to greater than 10. This paper describes simulations performed to assess the assembly's multiplication level under different conditions and describes the resources available at INL to support the use of these materials. We also describe some preliminary calculations and test activities using the assembly to study neutron multiplication. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Economic Contribution of North Dakota Cooperatives to the North Dakota State Economy

OpenAIRE

McKee, Gregory J.

2011-01-01

Cooperatives are a vital component of the North Dakota economy. Owned by their customers or by privately-held firms, cooperatives provide a variety of goods and services to North Dakota. Based on data provided by the North Dakota Secretary of State, 332 businesses operating in North Dakota identified themselves as cooperatives in 2010; 256 are headquartered in the state. The economic contribution of the North Dakota cooperatives reaches beyond the local communities where they are headquartere...

School Assemblies: The Lost Art.

Science.gov (United States)

Beach, Daniel R.

1979-01-01

Guidelines and suggestions are offered for successful school assemblies. The school assembly should be a positive event; an occasion for developing unity, group loyalty, and desirable audience habits. (Author/MLF)

Analysis of PWR assembly bow

International Nuclear Information System (INIS)

Fetterman, Robert J.; Franceschini, Fausto

2008-01-01

Excessive out of core assembly bow has been observed during refueling outages of certain PWRs. Assembly bow can take on a rather complex S-shape, and in other cases C-shape bow is prevalent. Concerns have been raised regarding the impact of the observed assembly bow on the in-core power distribution and the safety analyses supporting the plant operations. In response to these concerns, Westinghouse has developed a comprehensive analysis process for determining the effects of assembly bow on core power distributions and plant operating margins. This methodology has been applied to a particular reactor as part of an overall safety reanalysis completed in support of plant modifications. This paper provides a brief description of the methods used and a summary of the pertinent results. (authors)

Analysis of PWR assembly bow

Energy Technology Data Exchange (ETDEWEB)

Fetterman, Robert J.; Franceschini, Fausto [Westinghouse Electric Company LLC, Pittsburgh, PA (United States)

2008-07-01

Excessive out of core assembly bow has been observed during refueling outages of certain PWRs. Assembly bow can take on a rather complex S-shape, and in other cases C-shape bow is prevalent. Concerns have been raised regarding the impact of the observed assembly bow on the in-core power distribution and the safety analyses supporting the plant operations. In response to these concerns, Westinghouse has developed a comprehensive analysis process for determining the effects of assembly bow on core power distributions and plant operating margins. This methodology has been applied to a particular reactor as part of an overall safety reanalysis completed in support of plant modifications. This paper provides a brief description of the methods used and a summary of the pertinent results. (authors)

Impact analysis of spent fuel jacket assemblies

International Nuclear Information System (INIS)

Aramayo, G.A.

1994-01-01

As part of the analyses performed in support of the reracking of the High Flux Isotope Reactor pool, it became necessary to prove the structural integrity of the spent fuel jacket assemblies subjected to gravity drop that result from postulated accidents associated with the handling of these assemblies while submerged in the pool. The spent fuel jacket assemblies are an integral part of the reracking project, and serve to house fuel assemblies. The structure integrity of the jacket assemblies from loads that result from impact from a height of 10 feet onto specified targets has been performed analytically using the computer program LS-DYNA3D. Nine attitudes of the assembly at the time of impact have been considered. Results of the analyses show that there is no failure of the assemblies as a result of the impact scenarios considered

Genome Sequence Databases (Overview): Sequencing and Assembly

Energy Technology Data Exchange (ETDEWEB)

Lapidus, Alla L.

2009-01-01

From the date its role in heredity was discovered, DNA has been generating interest among scientists from different fields of knowledge: physicists have studied the three dimensional structure of the DNA molecule, biologists tried to decode the secrets of life hidden within these long molecules, and technologists invent and improve methods of DNA analysis. The analysis of the nucleotide sequence of DNA occupies a special place among the methods developed. Thanks to the variety of sequencing technologies available, the process of decoding the sequence of genomic DNA (or whole genome sequencing) has become robust and inexpensive. Meanwhile the assembly of whole genome sequences remains a challenging task. In addition to the need to assemble millions of DNA fragments of different length (from 35 bp (Solexa) to 800 bp (Sanger)), great interest in analysis of microbial communities (metagenomes) of different complexities raises new problems and pushes some new requirements for sequence assembly tools to the forefront. The genome assembly process can be divided into two steps: draft assembly and assembly improvement (finishing). Despite the fact that automatically performed assembly (or draft assembly) is capable of covering up to 98% of the genome, in most cases, it still contains incorrectly assembled reads. The error rate of the consensus sequence produced at this stage is about 1/2000 bp. A finished genome represents the genome assembly of much higher accuracy (with no gaps or incorrectly assembled areas) and quality ({approx}1 error/10,000 bp), validated through a number of computer and laboratory experiments.

Human Contamination in Public Genome Assemblies.

Science.gov (United States)

Kryukov, Kirill; Imanishi, Tadashi

2016-01-01

Contamination in genome assembly can lead to wrong or confusing results when using such genome as reference in sequence comparison. Although bacterial contamination is well known, the problem of human-originated contamination received little attention. In this study we surveyed 45,735 available genome assemblies for evidence of human contamination. We used lineage specificity to distinguish between contamination and conservation. We found that 154 genome assemblies contain fragments that with high confidence originate as contamination from human DNA. Majority of contaminating human sequences were present in the reference human genome assembly for over a decade. We recommend that existing contaminated genomes should be revised to remove contaminated sequence, and that new assemblies should be thoroughly checked for presence of human DNA before submitting them to public databases.

A divide-and-conquer algorithm for large-scale de novo transcriptome assembly through combining small assemblies from existing algorithms.

Science.gov (United States)

Sze, Sing-Hoi; Parrott, Jonathan J; Tarone, Aaron M

2017-12-06

While the continued development of high-throughput sequencing has facilitated studies of entire transcriptomes in non-model organisms, the incorporation of an increasing amount of RNA-Seq libraries has made de novo transcriptome assembly difficult. Although algorithms that can assemble a large amount of RNA-Seq data are available, they are generally very memory-intensive and can only be used to construct small assemblies. We develop a divide-and-conquer strategy that allows these algorithms to be utilized, by subdividing a large RNA-Seq data set into small libraries. Each individual library is assembled independently by an existing algorithm, and a merging algorithm is developed to combine these assemblies by picking a subset of high quality transcripts to form a large transcriptome. When compared to existing algorithms that return a single assembly directly, this strategy achieves comparable or increased accuracy as memory-efficient algorithms that can be used to process a large amount of RNA-Seq data, and comparable or decreased accuracy as memory-intensive algorithms that can only be used to construct small assemblies. Our divide-and-conquer strategy allows memory-intensive de novo transcriptome assembly algorithms to be utilized to construct large assemblies.

Fuel assembly and reactor core

International Nuclear Information System (INIS)

Aoyama, Motoo; Koyama, Jun-ichi; Uchikawa, Sadao; Bessho, Yasunori; Nakajima, Akiyoshi; Maruyama, Hiromi; Ozawa, Michihiro; Nakamura, Mitsuya.

1990-01-01

The present invention concerns fuel assemblies charged in a BWR type reactor and the reactor core. The fuel assembly comprises fuel rods containing burnable poisons and fuel rods not containing burnable poisons. Both of the highest and the lowest gadolinia concentrations of the fuel rods containing gadolinia as burnable poisons are present in the lower region of the fuel assembly. This can increase the spectral shift effect without increasing the maximum linear power density. (I.N.)

North Korean nuclear negotiation drama

International Nuclear Information System (INIS)

Kim, Jai Bok

1995-06-01

This book reports negotiation on North Korean nuclear among South Korea, North Korea and U. S. It includes an account about international issues on North Korean nuclear activities, a new aspect on the problems of North Korean nuclear, pressure on North Korea and startup for dialogue trying to solve problems by communication, investigation by IAEA, IAEA resolution and high tension on Korean peninsula with North Korean nuclear.

North Korean nuclear negotiation drama

Energy Technology Data Exchange (ETDEWEB)

Kim, Jai Bok

1995-06-15

This book reports negotiation on North Korean nuclear among South Korea, North Korea and U. S. It includes an account about international issues on North Korean nuclear activities, a new aspect on the problems of North Korean nuclear, pressure on North Korea and startup for dialogue trying to solve problems by communication, investigation by IAEA, IAEA resolution and high tension on Korean peninsula with North Korean nuclear.

Cleaning device for fuel assemblies

International Nuclear Information System (INIS)

Kita, Kaoru.

1986-01-01

Purpose: To completely remove obstacles deposited to the lower sides of supporting lattices for fuel assemblies by utilizing water within a pit before reloading of the fuel assemblies. Constitution: A cylindrical can, to which a fuel assembly is inserted through the upper end opening thereof, is vertically disposed within water of a pit and the bottom of the can is communicated with a pump by way of a suction pipe and a filter device disposed out of the pit. While on the other hand, a fuel assembly is suspended downwardly by a crane and inserted to the inside of the can through the upper end of the opening thereof and supported therein followed by starting the pump. As a result, water in the pit is circulated through the inside of the can, suction pipe, filtering device, pump, discharge pipe and to the inside of the pit thereby enabling to completely eliminate obstacles deposited to the lower surface, etc. of supporting lattices for the fuel assembly supported within the can. (Takahashi, M.)

Inverse design of multicomponent assemblies

Science.gov (United States)

Piñeros, William D.; Lindquist, Beth A.; Jadrich, Ryan B.; Truskett, Thomas M.

2018-03-01

Inverse design can be a useful strategy for discovering interactions that drive particles to spontaneously self-assemble into a desired structure. Here, we extend an inverse design methodology—relative entropy optimization—to determine isotropic interactions that promote assembly of targeted multicomponent phases, and we apply this extension to design interactions for a variety of binary crystals ranging from compact triangular and square architectures to highly open structures with dodecagonal and octadecagonal motifs. We compare the resulting optimized (self- and cross) interactions for the binary assemblies to those obtained from optimization of analogous single-component systems. This comparison reveals that self-interactions act as a "primer" to position particles at approximately correct coordination shell distances, while cross interactions act as the "binder" that refines and locks the system into the desired configuration. For simpler binary targets, it is possible to successfully design self-assembling systems while restricting one of these interaction types to be a hard-core-like potential. However, optimization of both self- and cross interaction types appears necessary to design for assembly of more complex or open structures.

Achieving health for a lifetime: a community engagement assessment focusing on school-age children to decrease obesity in Durham, North Carolina.

Science.gov (United States)

Corsino, Leonor; McDuffie, Jennifer R; Kotch, Jonathan; Coeytaux, Remy; Fuemmeler, Bernard F; Murphy, Gwen; Miranda, Marie Lynn; Poirier, Brenda; Morton, Janet; Reese, David; Baker, Sharon; Carter, Heidi; Freeman, Rebecca; Blue, Colleen; Yancy, William S

2013-01-01

Obesity is a prominent problem in the United States and in North Carolina. One way of combating it is with community-engaged interventions that foster collaboration between health-oriented organizations and community residents. Our purpose was to assemble a multifaceted group in Durham, North Carolina, to identify factors affecting obesity-related lifestyle behaviors; assess policies, resources, and the population's perception of the problem of obesity; and develop plans to improve health outcomes related to obesity. A team consisting of more than 2 dozen partners was assembled to form Achieving Health for a Lifetime (AHL) in order to study and address obesity in the community, initially focusing on elementary school-age children. The team developed a resource guide by collecting information by telephone interviews of provider organizations; geospatial resource maps were created using high-resolution geographic information systems, Duke's Data Support Repository, and county and city records; and focus groups were conducted using the nominal group technique. The AHL team, in collaboration with 2 other teams focused on diabetes and cardiovascular disease, identified 32 resources for diabetes, 20 for obesity, and 13 for cardiovascular disease. Using Geographic Information Systems (GIS), the team identified an area of Durham that had only 1 supermarket, but 34 fast-food restaurants and 84 convenience stores. The focus on particular neighborhoods means that the information obtained might not pertain to all neighborhoods. The AHL team was able to assemble a large community partnership in Durham that will allow the members of the community to continue to work toward making residents healthier. Communities facing similar challenges can learn from this experience.

Structural analysis of ITER sub-assembly tools

International Nuclear Information System (INIS)

Nam, K.O.; Park, H.K.; Kim, D.J.; Ahn, H.J.; Lee, J.H.; Kim, K.K.; Im, K.; Shaw, R.

2011-01-01

The ITER Tokamak assembly tools are purpose-built assembly tools to complete the ITER Tokamak machine which includes the cryostat and the components contained therein. The sector sub-assembly tools descried in this paper are main assembly tools to assemble vacuum vessel, thermal shield and toroidal filed coils into a complete 40 o sector. The 40 o sector sub-assembly tools are composed of sector sub-assembly tool, including radial beam, vacuum vessel supports and mid-plane brace tools. These tools shall have sufficient strength to transport and handle heavy weight of the ITER Tokamak machine reached several hundred tons. Therefore these tools should be designed and analyzed to confirm both the strength and structural stability even in the case of conservative assumptions. To verify structural stabilities of the sector sub-assembly tools in terms of strength and deflection, ANSYS code was used for linear static analysis. The results of the analysis show that these tools are designed with sufficient strength and stiffness. The conceptual designs of these tools are briefly described in this paper also.

Shock buffer for nuclear control assembly

International Nuclear Information System (INIS)

Bevilacqua, F.

1977-01-01

A shock buffer is provided for the gradual deceleration of a rapidly descending control element assembly in a nuclear reactor. The interactive buffer components are associated respectively with the movable control element assembly and part of the upper guide structure independent of and spaced from the fuel assemblies of the reactor

Bola-amphiphile self-assembly

DEFF Research Database (Denmark)

Svaneborg, Carsten

2012-01-01

Bola-amphiphiles are rod-like molecules where both ends of the molecule likes contact with water, while the central part of the molecule dislikes contact with water. What do such molecules do when they are dissolved in water? They self-assemble into micelles. This is a Dissipartive particle...... dynamics simulation of this self-assembly behaviour....

Assembling RNA Nanoparticles.

Science.gov (United States)

Xiao, Shou-Jun

2017-01-01

RNA nanoparticles are designed and self-assembled according to noncanonical interactions of naturally conserved RNA motifs and/or canonical Watson-Crick base-pairing interactions, which have potential applications in gene therapy and nanomedicine. These artificially engineered nanoparticles are mainly synthesized from in vitro transcribed RNAs, purified by denaturing and native polyacrylamide gel electrophoresis (PAGE), and characterized with native PAGE, AFM, and TEM technologies. The protocols of in vitro transcription, denaturing and native PAGE, and RNA nanoparticle self-assembly are described in detail.

A consensus approach to vertebrate de novo transcriptome assembly from RNA-seq data: Assembly of the duck (Anas platyrhynchos transcriptome.

Directory of Open Access Journals (Sweden)

Joanna eMoreton

2014-06-01

Full Text Available For vertebrate organisms where a reference genome is not available, de novo transcriptome assembly enables a cost effective insight into the identification of tissue specific or differentially expressed genes and variation of the coding part of the genome. However, since there are a number of different tools and parameters that can be used to reconstruct transcripts, it is difficult to determine an optimal method. Here we suggest a pipeline based on (1 assessing the performance of three different assembly tools (2 using both single and multiple k-mer approaches (3 examining the influence of the number of reads used in the assembly (4 merging assemblies from different tools. We use an example dataset from the vertebrate Anas platyrhynchos domestica (Pekin duck. We find that taking a subset of data enables a robust assembly to be produced by multiple methods without the need for very high memory capacity. The use of reads mapped back to transcripts (RMBT and CEGMA (Core Eukaryotic Genes Mapping Approach provides useful metrics to determine the completeness of assembly obtained. For this dataset the use of multiple k-mers in the assembly generated a more complete assembly as measured by greater number of RMBT and CEGMA score. Merged single k-mer assemblies are generally smaller but consist of longer transcripts, suggesting an assembly consisting of fewer fragmented transcripts. We suggest that the use of a subset of reads during assembly allows the relatively rapid investigation of assembly characteristics and can guide the user to the most appropriate transcriptome for particular downstream use. Transcriptomes generated by the compared assembly methods and the final merged assembly are freely available for download at http://dx.doi.org/10.6084/m9.figshare.1032613.

Design of the ITER tokamak assembly tools

Energy Technology Data Exchange (ETDEWEB)

Park, Hyunki [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of)], E-mail: hkpark@nfri.re.kr; Lee, Jaehyuk; Kim, Taehyung [SFA Engineering Corp., 42-7 Palyong-dong, Changwon-si, Gyeongsangnam-do 641-847 (Korea, Republic of); Song, Yunju [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of); Im, Kihak [ITER Organization, CEA Cadarasche, 13108 Saint Paul-lez-Durance (France); Kim, Byungchul; Lee, Hyeongon; Jung, Ki-Jung [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of)

2008-12-15

ITER tokamak assembly is mainly composed of lower cryostat activities, sector sub-assembly, sector assembly, in-vessel activities and ex-vessel activities. The main tools for sector sub-assembly procedures consists of upending tool, sector lifting tool, vacuum vessel support and bracing tool and sector sub-assembly tool. Conceptual design of assembly tools for sector sub-assembly procedures is described herein. The basic structure for upending tool has been developed under the assumption that upending is performed with crane which will be installed in Tokamak building. Sector lifting tool is designed to adjust the position of a sector to minimize the difference between the center of the tokamak building crane and the center of gravity of the sector. Sector sub-assembly tool is composed of special frame for the fine adjustment of position control with 6 degrees of freedom. The design of VV support and bracing tool for four kinds of VV 40 deg. sectors has been developed. Also, structural analysis for upending tool, sector sub-assembly tool has been studied using ANSYS for the situation of an applied load with the same dead weight multiplied by 3/4. The results of structural analyses for these tools were below the allowable values.

Fuel assembly for a nuclear reactor

International Nuclear Information System (INIS)

Gjertsen, R.K.

1982-01-01

A fuel assembly in a nuclear reactor comprises a locking mechanism that is capable of locking the fuel assembly to the core plate of a nuclear reactor to prevent inadvertent movement of the fuel assembly. The locking mechanism comprises a ratchet mechanism 108 that allows the fuel assembly to be easily locked to the core plate but prevents unlocking except when the ratchet is disengaged. The ratchet mechanism is coupled to the locking mechanism by a rotatable guide tube for a control rod or water displacer rod. (author)

Design configuration of GCFR core assemblies

International Nuclear Information System (INIS)

LaBar, M.P.; Lee, G.E.; Meyer, R.J.

1980-05-01

The current design configurations of the core assemblies for the gas-cooled fast reactor (GCFR) demonstration plant reactor core conceptual design are described. Primary emphasis is placed upon the design innovations that have been incorporated in the design of the core assemblies since the establishment of the initial design of an upflow GCFR core. A major feature of the design configurations is that they are prototypical of core assemblies for use in commercial plants; a larger number of the same assemblies would be used in a commercial plant

Deterministic nanoparticle assemblies: from substrate to solution

International Nuclear Information System (INIS)

Barcelo, Steven J; Gibson, Gary A; Yamakawa, Mineo; Li, Zhiyong; Kim, Ansoon; Norris, Kate J

2014-01-01

The deterministic assembly of metallic nanoparticles is an exciting field with many potential benefits. Many promising techniques have been developed, but challenges remain, particularly for the assembly of larger nanoparticles which often have more interesting plasmonic properties. Here we present a scalable process combining the strengths of top down and bottom up fabrication to generate deterministic 2D assemblies of metallic nanoparticles and demonstrate their stable transfer to solution. Scanning electron and high-resolution transmission electron microscopy studies of these assemblies suggested the formation of nanobridges between touching nanoparticles that hold them together so as to maintain the integrity of the assembly throughout the transfer process. The application of these nanoparticle assemblies as solution-based surface-enhanced Raman scattering (SERS) materials is demonstrated by trapping analyte molecules in the nanoparticle gaps during assembly, yielding uniformly high enhancement factors at all stages of the fabrication process. (paper)

SAGE: String-overlap Assembly of GEnomes.

Science.gov (United States)

Ilie, Lucian; Haider, Bahlul; Molnar, Michael; Solis-Oba, Roberto

2014-09-15

De novo genome assembly of next-generation sequencing data is one of the most important current problems in bioinformatics, essential in many biological applications. In spite of significant amount of work in this area, better solutions are still very much needed. We present a new program, SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers. SAGE benefits from innovations in almost every aspect of the assembly process: error correction of input reads, string-overlap graph construction, read copy counts estimation, overlap graph analysis and reduction, contig extraction, and scaffolding. We hope that these new ideas will help advance the current state-of-the-art in an essential area of research in genomics.

Research on Outfitting Virtual Assembly based on Ergonomics

Directory of Open Access Journals (Sweden)

Jiang Zuhua

2018-01-01

Full Text Available To improve the present situation where the assembly work of ship outfitting depends on manual experiential operation, the thesis, taking outfitting assembly operation as the research object and optimal assembly path as the target, puts forward the simulation method and procedure of outfitting virtual assembly considering operational posture, operational load, reachability and visibility and other ergonomic factors, taking pipe assembly operation of ship section as the application example. The results show that the method can obtain better assembly operation path, avoid interference of workers’ operation process and improve the efficiency of assembly operation.

Ordinary General Assembly

CERN Multimedia

Association du personnel

2010-01-01

Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Modifications to the statutes of the association Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda...

Fuel assembly

International Nuclear Information System (INIS)

Ueda, Sei; Ando, Ryohei; Mitsutake, Toru.

1995-01-01

The present invention concerns a fuel assembly suitable to a BWR-type reactor and improved especially with the nuclear characteristic, heat performance, hydraulic performance, dismantling or assembling performance and economical property. A part of poison rods are formed as a large-diameter/multi-region poison rods having a larger diameter than a fuel rod. A large number of fuel rods are disposed surrounding a large diameter water rod and a group of the large-diameter/multi-region poison rods in adjacent with the water rod. The large-diameter water rod has a burnable poison at the tube wall portion. At least a portion of the large-diameter poison rods has a coolant circulation portion allowing coolants to circulate therethrough. Since the large-diameter poison rods are disposed at a position of high neutron fluxes, a large neutron multiplication factor suppression effect can be provided, thereby enabling to reduce the number of burnable poison rods relative to fuels. As a result, power peaking in the fuel assembly is moderated and a greater amount of plutonium can be loaded. In addition the flow of cooling water which tends to gather around the large diameter water rod can be controlled to improve cooling performance of fuels. (N.H.)

Self-assembled biomimetic nanoreactors I: Polymeric template

Science.gov (United States)

McTaggart, Matt; Malardier-Jugroot, Cecile; Jugroot, Manish

2015-09-01

The variety of nanoarchitectures made feasible by the self-assembly of alternating copolymers opens new avenues for biomimicry. Indeed, self-assembled structures allow the development of nanoreactors which combine the efficiency of high surface area metal active centres to the effect of confinement due to the very small cavities generated by the self-assembly process. A novel self-assembly of high molecular weight alternating copolymers is characterized in the present study. The self-assembly is shown to organize into nanosheets, providing a 2 nm hydrophobic cavity with a 1D confinement.

Self-Controlling Rig for Jaw Crusher Assembly

OpenAIRE

Saurabh Jadhav; Anup Pawar

2017-01-01

The aim of the work is to develop a method for easy assembly of the bearing in the housing by standardized way. The assembly of bearing should take place on the atomized set up. Based on this method a assembly setup was constructed which enables to assembly of the shaft with bearing of different models of jaw crusher. First tests were done with manual alignment and it shows that with proper alignment shaft assembly is very easy operation and also safe. Results of those tests show that the dev...

Gigadalton-scale shape-programmable DNA assemblies

Science.gov (United States)

Wagenbauer, Klaus F.; Sigl, Christian; Dietz, Hendrik

2017-12-01

Natural biomolecular assemblies such as molecular motors, enzymes, viruses and subcellular structures often form by self-limiting hierarchical oligomerization of multiple subunits. Large structures can also assemble efficiently from a few components by combining hierarchical assembly and symmetry, a strategy exemplified by viral capsids. De novo protein design and RNA and DNA nanotechnology aim to mimic these capabilities, but the bottom-up construction of artificial structures with the dimensions and complexity of viruses and other subcellular components remains challenging. Here we show that natural assembly principles can be combined with the methods of DNA origami to produce gigadalton-scale structures with controlled sizes. DNA sequence information is used to encode the shapes of individual DNA origami building blocks, and the geometry and details of the interactions between these building blocks then control their copy numbers, positions and orientations within higher-order assemblies. We illustrate this strategy by creating planar rings of up to 350 nanometres in diameter and with atomic masses of up to 330 megadaltons, micrometre-long, thick tubes commensurate in size to some bacilli, and three-dimensional polyhedral assemblies with sizes of up to 1.2 gigadaltons and 450 nanometres in diameter. We achieve efficient assembly, with yields of up to 90 per cent, by using building blocks with validated structure and sufficient rigidity, and an accurate design with interaction motifs that ensure that hierarchical assembly is self-limiting and able to proceed in equilibrium to allow for error correction. We expect that our method, which enables the self-assembly of structures with sizes approaching that of viruses and cellular organelles, can readily be used to create a range of other complex structures with well defined sizes, by exploiting the modularity and high degree of addressability of the DNA origami building blocks used.

Three-dimensional assemblies of graphene prepared by a novel chemical reduction-induced self-assembly method

KAUST Repository

Zhang, Lianbin

2012-01-01

In this study, three-dimensional (3D) graphene assemblies are prepared from graphene oxide (GO) by a facile in situ reduction-assembly method, using a novel, low-cost, and environment-friendly reducing medium which is a combination of oxalic acid (OA) and sodium iodide (NaI). It is demonstrated that the combination of a reducing acid, OA, and NaI is indispensable for effective reduction of GO in the current study and this unique combination (1) allows for tunable control over the volume of the thus-prepared graphene assemblies and (2) enables 3D graphene assemblies to be prepared from the GO suspension with a wide range of concentrations (0.1 to 4.5 mg mL-1). To the best of our knowledge, the GO concentration of 0.1 mg mL-1 is the lowest GO concentration ever reported for preparation of 3D graphene assemblies. The thus-prepared 3D graphene assemblies exhibit low density, highly porous structures, and electrically conducting properties. As a proof of concept, we show that by infiltrating a responsive polymer of polydimethylsiloxane (PDMS) into the as-resulted 3D conducting network of graphene, a conducting composite is obtained, which can be used as a sensing device for differentiating organic solvents with different polarity. © 2012 The Royal Society of Chemistry.

Spontaneous Assembly of Exopolymers from Phytoplankton

Directory of Open Access Journals (Sweden)

Yong-Xue Ding

2009-01-01

Full Text Available Phytoplankton exopolymeric substances (EPS contribute significantly to the dissolved organic car bon (DOC pool in the ocean, playing crucial roles in the surface ocean car bon cycle. Recent studies have demonstrated that ~10% of marine DOC can self-assemble as microgels through electro static Ca bonds providing hotspots of enriched microbial substrate. How ever, the question whether EPS can self-assemble and the formation mechanisms for EPS microgels have not been examined. Here were port that EPS from three representative phytoplankton species, Synechococcus, Emiliania huxleyi, and Skeletonema costatum can spontaneously self assemble in artificial sea water (ASW, forming microscopic gels of ~ 3 - 4 __m in diameter. Different from the marine DOC polymers assembly, these EPS samples can self-assemble in Ca2+-free ASW. Further experiments from fluorescence enhancement and chemical composition analysis confirmed the existence of fair amounts of hydrophobic domains in these EPS samples. These results suggest that hydrophobic interactions play a key role in the assembly of EPS from these three species of marine phytoplankton.

Compte rendu de Juan Carlos Garrot, Jean-Louis Guereña, Mónica Zapata (dir., Figures de la censure dans les mondes hispanique et hispano-américain

Directory of Open Access Journals (Sweden)

Emilie Mendonça

2009-07-01

Full Text Available Publicada en el 2009, esta compilación prolonga el trabajo llevado a cabo por el grupo de investigación francés CIREMIA (Centre Interuniversitaire de Recherche sur l’Education et la Culture dans le Monde Ibérique et Ibéro-Américain en su colección «Études hispaniques», cuyos últimos volúmenes analizaban texto e imagen en el ámbito escolar, literario y cultural. Bajo la coordinación de Juan Carlos Garrot, Jean-Louis Guereña y Mónica Zapata, estas Figures de la censure dans les mondes hispaniq...

Subcritical assemblies, use and their feasibility assessment

International Nuclear Information System (INIS)

Haroon, M.R.

1982-03-01

In developing countries, subcritical assemblies can be a useful tool for training and research in the field of nuclear technology with minimum cost. The historical development of subcritical assemblies and the reactor physics experiments which can be carried out using this facility are outlined. The different types of subcritical assemblies have been described and material requirements for each assembly have been pointed out. (author)

Virtual Reality and Haptics for Product Assembly

Directory of Open Access Journals (Sweden)

Maria Teresa Restivo

2012-01-01

Full Text Available Haptics can significantly enhance the user's sense of immersion and interactivity. An industrial application of virtual reality and haptics for product assembly is described in this paper, which provides a new and low-cost approach for product assembly design, assembly task planning and assembly operation training. A demonstration of the system with haptics device interaction was available at the session of exp.at'11.

Electrode assembly for a lithium ion battery, process for the production of such electrode assembly, and lithium ion battery comprising such electrode assemblies

NARCIS (Netherlands)

Mulder, F.M.; Wagemaker, M.

2013-01-01

The invention provides an electrode assembly for a lithium ion battery, the electrode assembly comprising a lithium storage electrode layer on a current collector, wherein the lithium storage electrode layer is a porous layer having a porosity in the range of -35 %, with pores having pore widths in

Effect of assembled time on the corrosion behaviors of SAMs film on the AM60B alloy and its assembled mechanism

Energy Technology Data Exchange (ETDEWEB)

Liu, Xianbin, E-mail: xbliu@imr.ac.cn; Shan, Dayong; Song, Yingwei; Han, En-hou

2015-01-15

The influence of assembled time on the corrosion behaviors of SAMs film on the AM60B alloy and its assembled mechanism have been investigated by electrochemical measurements, scanning electron microscopy (SEM) observation and X-ray photoelectron spectroscopy (XPS) analysis. The self-assembled experiment on the AM60B magnesium alloy indicates that the corrosion susceptibility decreases with increasing assembled time until 24 h on cast AM60B alloy and then increases with increase of the assembled time proved by EIS measurement and potentiodynamic curves. The self-assembled experiments on pure magnesium and various heat treated cast AM60B magnesium alloy illuminate that the dissolved aluminum in magnesium solid solution is the key factor for assembled efficiency and is hard to self-assemble on the pure magnesium without aluminum. The corrosion resistance of self-assembled film on AM60B magnesium alloy is monotonically increasing with the dissolved aluminum. The results of XPS analysis reveal the assembled mechanism on AM60B and corroborate the function of Al element. - Highlights: • It is hard to self-assemble on the pure magnesium. • 24 h assembled film has the low corrosion susceptibility by EIS and polarization. • The corrosion susceptibility of SAMs film lie on the Al atom state in AM60B. • The corrosion susceptibility of SAMs film is decreasing with the dissolved Al.

Effect of assembled time on the corrosion behaviors of SAMs film on the AM60B alloy and its assembled mechanism

International Nuclear Information System (INIS)

Liu, Xianbin; Shan, Dayong; Song, Yingwei; Han, En-hou

2015-01-01

The influence of assembled time on the corrosion behaviors of SAMs film on the AM60B alloy and its assembled mechanism have been investigated by electrochemical measurements, scanning electron microscopy (SEM) observation and X-ray photoelectron spectroscopy (XPS) analysis. The self-assembled experiment on the AM60B magnesium alloy indicates that the corrosion susceptibility decreases with increasing assembled time until 24 h on cast AM60B alloy and then increases with increase of the assembled time proved by EIS measurement and potentiodynamic curves. The self-assembled experiments on pure magnesium and various heat treated cast AM60B magnesium alloy illuminate that the dissolved aluminum in magnesium solid solution is the key factor for assembled efficiency and is hard to self-assemble on the pure magnesium without aluminum. The corrosion resistance of self-assembled film on AM60B magnesium alloy is monotonically increasing with the dissolved aluminum. The results of XPS analysis reveal the assembled mechanism on AM60B and corroborate the function of Al element. - Highlights: • It is hard to self-assemble on the pure magnesium. • 24 h assembled film has the low corrosion susceptibility by EIS and polarization. • The corrosion susceptibility of SAMs film lie on the Al atom state in AM60B. • The corrosion susceptibility of SAMs film is decreasing with the dissolved Al

TracWorks - global fuel assembly data management

International Nuclear Information System (INIS)

Cooney, B.F.

1997-01-01

The TracWorks Data Management System is a workstation-based software product that provides a utility with a single, broadly available, regularly updated source for virtually every data item available for a fuel assembly or core component. TracWorks is designed to collect, maintain and provide information about assembly and component locations and movements during the refuelling process and operation, assembly burnup and isotopic inventory (both in-core and out-of-core), pin burnup and isotopics for pins that have been removed from their original assemblies, assembly and component inspection results (including video) and manufacturing data provided by the fabrication plant. (UK)

Network spandrels reflect ecological assembly.

Science.gov (United States)

Maynard, Daniel S; Serván, Carlos A; Allesina, Stefano

2018-03-01

Ecological networks that exhibit stable dynamics should theoretically persist longer than those that fluctuate wildly. Thus, network structures which are over-represented in natural systems are often hypothesised to be either a cause or consequence of ecological stability. Rarely considered, however, is that these network structures can also be by-products of the processes that determine how new species attempt to join the community. Using a simulation approach in tandem with key results from random matrix theory, we illustrate how historical assembly mechanisms alter the structure of ecological networks. We demonstrate that different community assembly scenarios can lead to the emergence of structures that are often interpreted as evidence of 'selection for stability'. However, by controlling for the underlying selection pressures, we show that these assembly artefacts-or spandrels-are completely unrelated to stability or selection, and are instead by-products of how new species are introduced into the system. We propose that these network-assembly spandrels are critically overlooked aspects of network theory and stability analysis, and we illustrate how a failure to adequately account for historical assembly can lead to incorrect inference about the causes and consequences of ecological stability. © 2018 John Wiley & Sons Ltd/CNRS.

Probabilistic reasoning for assembly-based 3D modeling

KAUST Repository

Chaudhuri, Siddhartha; Kalogerakis, Evangelos; Guibas, Leonidas; Koltun, Vladlen

2011-01-01

Assembly-based modeling is a promising approach to broadening the accessibility of 3D modeling. In assembly-based modeling, new models are assembled from shape components extracted from a database. A key challenge in assembly-based modeling

NEDDylation promotes stress granule assembly.

Science.gov (United States)

Jayabalan, Aravinth Kumar; Sanchez, Anthony; Park, Ra Young; Yoon, Sang Pil; Kang, Gum-Yong; Baek, Je-Hyun; Anderson, Paul; Kee, Younghoon; Ohn, Takbum

2016-07-06

Stress granules (SGs) harbour translationally stalled messenger ribonucleoproteins and play important roles in regulating gene expression and cell fate. Here we show that neddylation promotes SG assembly in response to arsenite-induced oxidative stress. Inhibition or depletion of key components of the neddylation machinery concomitantly inhibits stress-induced polysome disassembly and SG assembly. Affinity purification and subsequent mass-spectrometric analysis of Nedd8-conjugated proteins from translationally stalled ribosomal fractions identified ribosomal proteins, translation factors and RNA-binding proteins (RBPs), including SRSF3, a previously known SG regulator. We show that SRSF3 is selectively neddylated at Lys85 in response to arsenite. A non-neddylatable SRSF3 (K85R) mutant do not prevent arsenite-induced polysome disassembly, but fails to support the SG assembly, suggesting that the neddylation pathway plays an important role in SG assembly.

Lateral loadings on snubber assemblies

International Nuclear Information System (INIS)

Raphael, L.S.

1981-01-01

This paper examines the installation of snubber assemblies in power plants with respect to transverse or lateral loads as well as axial loads. Evaluation of the effects of low level, lateral loads was performed by analytical means. At higher loadings, the snubber assembly could no longer be treated as a column; therefore, the effects of lateral loadings was determined by test. The test consisted of applying both lateral and axial loads simultaneously. Results of both the analysis and the test showed that the application of lateral loads had a considerable effect on the snubber assemblies

Directed Assembly of Gold Nanoparticles

DEFF Research Database (Denmark)

Westerlund, Axel Rune Fredrik; Bjørnholm, Thomas

2009-01-01

As a complement to common "top-down" lithography techniques, "bottom-up" assembly techniques are emerging as promising tools to build nanoscale structures in a predictable way. Gold nanoparticles that are stable and relatively easy to synthesize are important building blocks in many such structures...... due to their useful optical and electronic properties. Programmed assembly of gold nanoparticles in one, two, and three dimensions is therefore of large interest. This review focuses on the progress from the last three years in the field of directed gold nanoparticle and nanorod assembly using...

The immitigable nature of assembly bias: the impact of halo definition on assembly bias

Science.gov (United States)

Villarreal, Antonio S.; Zentner, Andrew R.; Mao, Yao-Yuan; Purcell, Chris W.; van den Bosch, Frank C.; Diemer, Benedikt; Lange, Johannes U.; Wang, Kuan; Campbell, Duncan

2017-11-01

Dark matter halo clustering depends not only on halo mass, but also on other properties such as concentration and shape. This phenomenon is known broadly as assembly bias. We explore the dependence of assembly bias on halo definition, parametrized by spherical overdensity parameter, Δ. We summarize the strength of concentration-, shape-, and spin-dependent halo clustering as a function of halo mass and halo definition. Concentration-dependent clustering depends strongly on mass at all Δ. For conventional halo definitions (Δ ∼ 200 - 600 m), concentration-dependent clustering at low mass is driven by a population of haloes that is altered through interactions with neighbouring haloes. Concentration-dependent clustering can be greatly reduced through a mass-dependent halo definition with Δ ∼ 20 - 40 m for haloes with M200 m ≲ 1012 h-1M⊙. Smaller Δ implies larger radii and mitigates assembly bias at low mass by subsuming altered, so-called backsplash haloes into now larger host haloes. At higher masses (M200 m ≳ 1013 h-1M⊙) larger overdensities, Δ ≳ 600 m, are necessary. Shape- and spin-dependent clustering are significant for all halo definitions that we explore and exhibit a relatively weaker mass dependence. Generally, both the strength and the sense of assembly bias depend on halo definition, varying significantly even among common definitions. We identify no halo definition that mitigates all manifestations of assembly bias. A halo definition that mitigates assembly bias based on one halo property (e.g. concentration) must be mass dependent. The halo definitions that best mitigate concentration-dependent halo clustering do not coincide with the expected average splashback radii at fixed halo mass.

Self-assembled DNA Structures for Nanoconstruction

Science.gov (United States)

Yan, Hao; Yin, Peng; Park, Sung Ha; Li, Hanying; Feng, Liping; Guan, Xiaoju; Liu, Dage; Reif, John H.; LaBean, Thomas H.

2004-09-01

In recent years, a number of research groups have begun developing nanofabrication methods based on DNA self-assembly. Here we review our recent experimental progress to utilize novel DNA nanostructures for self-assembly as well as for templates in the fabrication of functional nano-patterned materials. We have prototyped a new DNA nanostructure known as a cross structure. This nanostructure has a 4-fold symmetry which promotes its self-assembly into tetragonal 2D lattices. We have utilized the tetragonal 2D lattices as templates for highly conductive metallic nanowires and periodic 2D protein nano-arrays. We have constructed and characterized a DNA nanotube, a new self-assembling superstructure composed of DNA tiles. We have also demonstrated an aperiodic DNA lattice composed of DNA tiles assembled around a long scaffold strand; the system translates information encoded in the scaffold strand into a specific and reprogrammable barcode pattern. We have achieved metallic nanoparticle linear arrays templated on self-assembled 1D DNA arrays. We have designed and demonstrated a 2-state DNA lattice, which displays expand/contract motion switched by DNA nanoactuators. We have also achieved an autonomous DNA motor executing unidirectional motion along a linear DNA track.

Improvements in nuclear fuel assembly cages

Energy Technology Data Exchange (ETDEWEB)

Eaton, C.W.; Seeley, T.A.; Ince, G.; Speakman, W.T.

1986-03-12

The fuel pin/guide tube supporting grids of an assembly cage for a multi pin fuel element or a reflector element for a stringer are mounted in the moderator sleeve by way of mounting assemblies engaged in grooves machined into the interior surface of the sleeve, each mounting assembly including a split ring which is assembled into its groove by being radially contracted, pushed along the sleeve into registry with the groove and allowed to radially expand. The split ring may carry burnable neutron absorber. The region of the sleeve between two adjacent grids may be of smaller internal diameter than the remainder of the sleeve.

Coherent changes of wintertime surface air temperatures over North Asia and North America.

Science.gov (United States)

Yu, Bin; Lin, Hai

2018-03-29

The surface temperature variance and its potential change with global warming are most prominent in winter over Northern Hemisphere mid-high latitudes. Consistent wintertime surface temperature variability has been observed over large areas in Eurasia and North America on a broad range of time scales. However, it remains a challenge to quantify where and how the coherent change of temperature anomalies occur over the two continents. Here we demonstrate the coherent change of wintertime surface temperature anomalies over North Asia and the central-eastern parts of North America for the period from 1951 to 2015. This is supported by the results from the empirical orthogonal function analysis of surface temperature and temperature trend anomalies over the Northern Hemisphere extratropical lands and the timeseries analysis of the regional averaged temperature anomalies over North Asia and the Great Plains and Great Lakes. The Asian-Bering-North American (ABNA) teleconnection provides a pathway to connect the regional temperature anomalies over the two continents. The ABNA is also responsible for the decadal variation of the temperature relationship between North Asia and North America.

Peripheral pin alignment system for fuel assemblies

International Nuclear Information System (INIS)

Anthony, A.J.

1981-01-01

An alignment system is provided for nuclear fuel assemblies in a nuclear core. The core support structure of the nuclear reactor includes upwardly pointing alignment pins arranged in a square grid and engage peripheral depressions formed in the lateral periphery of the lower ends of each of the fuel assemblies of the core. In a preferred embodiment, the depressions are located at the corners of the fuel assemblies so that each depression includes one-quarter of a cylindrical void. Accordingly, each fuel assembly is positioned and aligned by one-quarter of four separate alignment pins which engage the fuel assemblies at their lower exterior corners. (author)

CAD Parts-Based Assembly Modeling by Probabilistic Reasoning

KAUST Repository

Zhang, Kai-Ke

2016-04-11

Nowadays, increasing amount of parts and sub-assemblies are publicly available, which can be used directly for product development instead of creating from scratch. In this paper, we propose an interactive design framework for efficient and smart assembly modeling, in order to improve the design efficiency. Our approach is based on a probabilistic reasoning. Given a collection of industrial assemblies, we learn a probabilistic graphical model from the relationships between the parts of assemblies. Then in the modeling stage, this probabilistic model is used to suggest the most likely used parts compatible with the current assembly. Finally, the parts are assembled under certain geometric constraints. We demonstrate the effectiveness of our framework through a variety of assembly models produced by our prototype system. © 2015 IEEE.

CAD Parts-Based Assembly Modeling by Probabilistic Reasoning

KAUST Repository

Zhang, Kai-Ke; Hu, Kai-Mo; Yin, Li-Cheng; Yan, Dongming; Wang, Bin

2016-01-01

Nowadays, increasing amount of parts and sub-assemblies are publicly available, which can be used directly for product development instead of creating from scratch. In this paper, we propose an interactive design framework for efficient and smart assembly modeling, in order to improve the design efficiency. Our approach is based on a probabilistic reasoning. Given a collection of industrial assemblies, we learn a probabilistic graphical model from the relationships between the parts of assemblies. Then in the modeling stage, this probabilistic model is used to suggest the most likely used parts compatible with the current assembly. Finally, the parts are assembled under certain geometric constraints. We demonstrate the effectiveness of our framework through a variety of assembly models produced by our prototype system. © 2015 IEEE.

De novo transcriptome assembly of drought tolerant CAM plants, Agave deserti and Agave tequilana.

Science.gov (United States)

Gross, Stephen M; Martin, Jeffrey A; Simpson, June; Abraham-Juarez, María Jazmín; Wang, Zhong; Visel, Axel

2013-08-19

Agaves are succulent monocotyledonous plants native to xeric environments of North America. Because of their adaptations to their environment, including crassulacean acid metabolism (CAM, a water-efficient form of photosynthesis), and existing technologies for ethanol production, agaves have gained attention both as potential lignocellulosic bioenergy feedstocks and models for exploring plant responses to abiotic stress. However, the lack of comprehensive Agave sequence datasets limits the scope of investigations into the molecular-genetic basis of Agave traits. Here, we present comprehensive, high quality de novo transcriptome assemblies of two Agave species, A. tequilana and A. deserti, built from short-read RNA-seq data. Our analyses support completeness and accuracy of the de novo transcriptome assemblies, with each species having a minimum of approximately 35,000 protein-coding genes. Comparison of agave proteomes to those of additional plant species identifies biological functions of gene families displaying sequence divergence in agave species. Additionally, a focus on the transcriptomics of the A. deserti juvenile leaf confirms evolutionary conservation of monocotyledonous leaf physiology and development along the proximal-distal axis. Our work presents a comprehensive transcriptome resource for two Agave species and provides insight into their biology and physiology. These resources are a foundation for further investigation of agave biology and their improvement for bioenergy development.

Shaft seal assembly and method

Science.gov (United States)

Keba, John E. (Inventor)

2007-01-01

A pressure-actuated shaft seal assembly and associated method for controlling the flow of fluid adjacent a rotatable shaft are provided. The seal assembly includes one or more seal members that can be adjusted between open and closed positions, for example, according to the rotational speed of the shaft. For example, the seal member can be configured to be adjusted according to a radial pressure differential in a fluid that varies with the rotational speed of the shaft. In addition, in the closed position, each seal member can contact a rotatable member connected to the shaft to form a seal with the rotatable member and prevent fluid from flowing through the assembly. Thus, the seal can be closed at low speeds of operation and opened at high speeds of operation, thereby reducing the heat and wear in the seal assembly while maintaining a sufficient seal during all speeds of operation.

Three-dimensional assemblies of graphene prepared by a novel chemical reduction-induced self-assembly method

KAUST Repository

Zhang, Lianbin; Chen, Guoying; Hedhili, Mohamed N.; Zhang, Hongnan; Wang, Peng

2012-01-01

In this study, three-dimensional (3D) graphene assemblies are prepared from graphene oxide (GO) by a facile in situ reduction-assembly method, using a novel, low-cost, and environment-friendly reducing medium which is a combination of oxalic acid

Self-assembling peptide semiconductors

Science.gov (United States)

Tao, Kai; Makam, Pandeeswar; Aizen, Ruth; Gazit, Ehud

2017-01-01

Semiconductors are central to the modern electronics and optics industries. Conventional semiconductive materials bear inherent limitations, especially in emerging fields such as interfacing with biological systems and bottom-up fabrication. A promising candidate for bioinspired and durable nanoscale semiconductors is the family of self-assembled nanostructures comprising short peptides. The highly ordered and directional intermolecular π-π interactions and hydrogen-bonding network allow the formation of quantum confined structures within the peptide self-assemblies, thus decreasing the band gaps of the superstructures into semiconductor regions. As a result of the diverse architectures and ease of modification of peptide self-assemblies, their semiconductivity can be readily tuned, doped, and functionalized. Therefore, this family of electroactive supramolecular materials may bridge the gap between the inorganic semiconductor world and biological systems. PMID:29146781

Integrated magnetic transformer assembly

DEFF Research Database (Denmark)

2014-01-01

The present invention relates to an integrated magnetics transformer assembly comprising a first magnetically permeable core forming a first substantially closed magnetic flux path and a second magnetically permeable core forming a second substantially closed magnetic flux path. A first input...... inductor winding is wound around a first predetermined segment of the first magnetically permeable core and a second input inductor winding is wound around a first predetermined segment of the second magnetically permeable core. The integrated magnetics transformer assembly further comprises a first output......-winding of the first output inductor winding and the first half-winding of the second output inductor winding are configured to produce aligned, i.e. in the same direction, magnetic fluxes through the first substantially closed magnetic flux path. The integrated magnetics transformer assembly is well- suited for use...

Targeted assembly of short sequence reads.

Directory of Open Access Journals (Sweden)

René L Warren

Full Text Available As next-generation sequence (NGS production continues to increase, analysis is becoming a significant bottleneck. However, in situations where information is required only for specific sequence variants, it is not necessary to assemble or align whole genome data sets in their entirety. Rather, NGS data sets can be mined for the presence of sequence variants of interest by localized assembly, which is a faster, easier, and more accurate approach. We present TASR, a streamlined assembler that interrogates very large NGS data sets for the presence of specific variants by only considering reads within the sequence space of input target sequences provided by the user. The NGS data set is searched for reads with an exact match to all possible short words within the target sequence, and these reads are then assembled stringently to generate a consensus of the target and flanking sequence. Typically, variants of a particular locus are provided as different target sequences, and the presence of the variant in the data set being interrogated is revealed by a successful assembly outcome. However, TASR can also be used to find unknown sequences that flank a given target. We demonstrate that TASR has utility in finding or confirming genomic mutations, polymorphisms, fusions and integration events. Targeted assembly is a powerful method for interrogating large data sets for the presence of sequence variants of interest. TASR is a fast, flexible and easy to use tool for targeted assembly.

Moisture Research - Optimizing Wall Assemblies

Energy Technology Data Exchange (ETDEWEB)

Arena, L.; Mantha, P.

2013-05-01

The Consortium for Advanced Residential Buildings (CARB) evaluated several different configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies. WUFI and THERM were used to model the hygrothermal and heat transfer characteristics of these walls.

Equilibrium polymerization models of re-entrant self-assembly

Science.gov (United States)

Dudowicz, Jacek; Douglas, Jack F.; Freed, Karl F.

2009-04-01

As is well known, liquid-liquid phase separation can occur either upon heating or cooling, corresponding to lower and upper critical solution phase boundaries, respectively. Likewise, self-assembly transitions from a monomeric state to an organized polymeric state can proceed either upon increasing or decreasing temperature, and the concentration dependent ordering temperature is correspondingly called the "floor" or "ceiling" temperature. Motivated by the fact that some phase separating systems exhibit closed loop phase boundaries with two critical points, the present paper analyzes self-assembly analogs of re-entrant phase separation, i.e., re-entrant self-assembly. In particular, re-entrant self-assembly transitions are demonstrated to arise in thermally activated equilibrium self-assembling systems, when thermal activation is more favorable than chain propagation, and in equilibrium self-assembly near an adsorbing boundary where strong competition exists between adsorption and self-assembly. Apparently, the competition between interactions or equilibria generally underlies re-entrant behavior in both liquid-liquid phase separation and self-assembly transitions.

Illustrating how mechanical assemblies work

KAUST Repository

Mitra, Niloy J.; Yang, Yongliang; Yan, Dongming; Li, Wilmot; Agrawala, Maneesh

2010-01-01

How things work visualizations use a variety of visual techniques to depict the operation of complex mechanical assemblies. We present an automated approach for generating such visualizations. Starting with a 3D CAD model of an assembly, we first infer the motions of individual parts and the interactions between parts based on their geometry and a few user specified constraints. We then use this information to generate visualizations that incorporate motion arrows, frame sequences and animation to convey the causal chain of motions and mechanical interactions between parts. We present results for a wide variety of assemblies. © 2010 ACM.

Fuel assembly in a reactor

International Nuclear Information System (INIS)

Saito, Shozo; Kawahara, Akira.

1975-01-01

Object: To provide a fuel assembly in a reactor which can effectively prevent damage of the clad tube caused by mutual interference between pellets and the clad tube. Structure: A clad tube for a fuel element, which is located in the outer peripheral portion, among the fuel elements constituting fuel assemblies arranged in assembled and lattice fashion within a channel box, is increased in thickness by reducing the inside diameter thereof to be smaller than that of fuel elements internally located, thereby preventing damage of the clad tube resulting from rapid rise in output produced when control rods are removed. (Kamimura, M.)

Illustrating how mechanical assemblies work

KAUST Repository

Mitra, Niloy J.

2010-07-26

How things work visualizations use a variety of visual techniques to depict the operation of complex mechanical assemblies. We present an automated approach for generating such visualizations. Starting with a 3D CAD model of an assembly, we first infer the motions of individual parts and the interactions between parts based on their geometry and a few user specified constraints. We then use this information to generate visualizations that incorporate motion arrows, frame sequences and animation to convey the causal chain of motions and mechanical interactions between parts. We present results for a wide variety of assemblies. © 2010 ACM.

Assembly considerations for large reflectors

Science.gov (United States)

Bush, H.

1988-01-01

The technologies developed at LaRC in the area of erectable instructures are discussed. The information is of direct value to the Large Deployable Reflector (LDR) because an option for the LDR backup structure is to assemble it in space. The efforts in this area, which include development of joints, underwater assembly simulation tests, flight assembly/disassembly tests, and fabrication of 5-meter trusses, led to the use of the LaRC concept as the baseline configuration for the Space Station Structure. The Space Station joint is linear in the load and displacement range of interest to Space Station; the ability to manually assemble and disassemble a 45-foot truss structure was demonstrated by astronauts in space as part of the ACCESS Shuttle Flight Experiment. The structure was built in 26 minutes 46 seconds, and involved a total of 500 manipulations of untethered hardware. Also, the correlation of the space experience with the neutral buoyancy simulation was very good. Sections of the proposed 5-meter bay Space Station truss have been built on the ground. Activities at LaRC have included the development of mobile remote manipulator systems (which can traverse the Space Station 5-meter structure), preliminary LDR sun shield concepts, LDR construction scenarios, and activities in robotic assembly of truss-type structures.

Hierarchical Self Assembly of Patterns from the Robinson Tilings: DNA Tile Design in an Enhanced Tile Assembly Model.

Science.gov (United States)

Padilla, Jennifer E; Liu, Wenyan; Seeman, Nadrian C

2012-06-01

We introduce a hierarchical self assembly algorithm that produces the quasiperiodic patterns found in the Robinson tilings and suggest a practical implementation of this algorithm using DNA origami tiles. We modify the abstract Tile Assembly Model, (aTAM), to include active signaling and glue activation in response to signals to coordinate the hierarchical assembly of Robinson patterns of arbitrary size from a small set of tiles according to the tile substitution algorithm that generates them. Enabling coordinated hierarchical assembly in the aTAM makes possible the efficient encoding of the recursive process of tile substitution.

Viral capsid assembly as a model for protein aggregation diseases: Active processes catalyzed by cellular assembly machines comprising novel drug targets.

Science.gov (United States)

Marreiros, Rita; Müller-Schiffmann, Andreas; Bader, Verian; Selvarajah, Suganya; Dey, Debendranath; Lingappa, Vishwanath R; Korth, Carsten

2015-09-02

Viruses can be conceptualized as self-replicating multiprotein assemblies, containing coding nucleic acids. Viruses have evolved to exploit host cellular components including enzymes to ensure their replicative life cycle. New findings indicate that also viral capsid proteins recruit host factors to accelerate their assembly. These assembly machines are RNA-containing multiprotein complexes whose composition is governed by allosteric sites. In the event of viral infection, the assembly machines are recruited to support the virus over the host and are modified to achieve that goal. Stress granules and processing bodies may represent collections of such assembly machines, readily visible by microscopy but biochemically labile and difficult to isolate by fractionation. We hypothesize that the assembly of protein multimers such as encountered in neurodegenerative or other protein conformational diseases, is also catalyzed by assembly machines. In the case of viral infection, the assembly machines have been modified by the virus to meet the virus' need for rapid capsid assembly rather than host homeostasis. In the case of the neurodegenerative diseases, it is the monomers and/or low n oligomers of the so-called aggregated proteins that are substrates of assembly machines. Examples for substrates are amyloid β peptide (Aβ) and tau in Alzheimer's disease, α-synuclein in Parkinson's disease, prions in the prion diseases, Disrupted-in-schizophrenia 1 (DISC1) in subsets of chronic mental illnesses, and others. A likely continuum between virus capsid assembly and cell-to-cell transmissibility of aggregated proteins is remarkable. Protein aggregation diseases may represent dysfunction and dysregulation of these assembly machines analogous to the aberrations induced by viral infection in which cellular homeostasis is pathologically reprogrammed. In this view, as for viral infection, reset of assembly machines to normal homeostasis should be the goal of protein aggregation

Handling apparatus for a nuclear reactor fuel assembly

International Nuclear Information System (INIS)

Shallenberger, J.M.; Hornak, L.P.; Desmarchais, W.E.

1978-01-01

An apparatus is disclosed for handling radioactive fuel assembly during transfer operations. The radioactive fuel assembly is drawn up into a shielding sleeve which substantially reduces the level of radioactivity immediately surrounding the sleeve thereby permitting direct access by operating personnel. The lifting assembly which draws the fuel assembly up within the shielding sleeve is mounted to and forms an integral part of the handling apparatus. The shielding sleeve accompanies the fuel assembly during all of the transfer operations

Neutron detector assembly

International Nuclear Information System (INIS)

Hanai, Koi; Shirayama, Shinpei.

1978-01-01

Purpose: To prevent gamma-ray from leaking externally passing through the inside of a neutron detector assembly. Constitution: In a neutron detector assembly having a protection pipe formed with an enlarged diameter portion which serves also as a spacer, partition plates with predetermined width are disposed at the upper and the lower portions in this expanded portion. A lot of metal particles are filled into spaces formed by the partition plates. In such a structure, the metal particles well-absorb the gamma-rays from above and convert them into heat to provide shielding for the gamma-rays. (Horiuchi, T.)

Synthetic Self-Assembled Materials in Biological Environments

NARCIS (Netherlands)

Versluis, F.; van Esch, J.H.; Eelkema, R.

2016-01-01

Synthetic self-assembly has long been recognized as an excellent approach for the formation of ordered structures on the nanoscale. Although the development of synthetic self-assembling materials has often been inspired by principles observed in nature (e.g., the assembly of lipids, DNA,

Precision lens assembly with alignment turning system

Science.gov (United States)

Ho, Cheng-Fang; Huang, Chien-Yao; Lin, Yi-Hao; Kuo, Hui-Jean; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Chen, Fong-Zhi

2017-10-01

The poker chip assembly with high precision lens barrels is widely applied to ultra-high performance optical system. ITRC applies the poker chip assembly technology to the high numerical aperture objective lenses and lithography projection lenses because of its high efficiency assembly process. In order to achieve high precision lens cell for poker chip assembly, an alignment turning system (ATS) is developed. The ATS includes measurement, alignment and turning modules. The measurement module is equipped with a non-contact displacement sensor (NCDS) and an autocollimator (ACM). The NCDS and ACM are used to measure centration errors of the top and the bottom surface of a lens respectively; then the amount of adjustment of displacement and tilt with respect to the rotational axis of the turning machine for the alignment module can be determined. After measurement, alignment and turning processes on the ATS, the centration error of a lens cell with 200 mm in diameter can be controlled within 10 arcsec. Furthermore, a poker chip assembly lens cell with three sub-cells is demonstrated, each sub-cells are measured and accomplished with alignment and turning processes. The lens assembly test for five times by each three technicians; the average transmission centration error of assembly lens is 12.45 arcsec. The results show that ATS can achieve high assembly efficiency for precision optical systems.

Extreme-Scale De Novo Genome Assembly

Energy Technology Data Exchange (ETDEWEB)

Georganas, Evangelos [Intel Corporation, Santa Clara, CA (United States); Hofmeyr, Steven [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint Genome Inst.; Egan, Rob [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Computational Research Division; Buluc, Aydin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint Genome Inst.; Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint Genome Inst.; Rokhsar, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Computational Research Division; Yelick, Katherine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint Genome Inst.

2017-09-26

De novo whole genome assembly reconstructs genomic sequence from short, overlapping, and potentially erroneous DNA segments and is one of the most important computations in modern genomics. This work presents HipMER, a high-quality end-to-end de novo assembler designed for extreme scale analysis, via efficient parallelization of the Meraculous code. Genome assembly software has many components, each of which stresses different components of a computer system. This chapter explains the computational challenges involved in each step of the HipMer pipeline, the key distributed data structures, and communication costs in detail. We present performance results of assembling the human genome and the large hexaploid wheat genome on large supercomputers up to tens of thousands of cores.

Identification of Factors Promoting HBV Capsid Self-Assembly by Assembly-Promoting Antivirals.

Science.gov (United States)

Rath, Soumya Lipsa; Liu, Huihui; Okazaki, Susumu; Shinoda, Wataru

2018-02-26

Around 270 million individuals currently live with hepatitis B virus (HBV) infection. Heteroaryldihydropyrimidines (HAPs) are a family of antivirals that target the HBV capsid protein and induce aberrant self-assembly. The capsids formed resemble the native capsid structure but are unable to propagate the virus progeny because of a lack of RNA/DNA. Under normal conditions, self-assembly is initiated by the viral genome. The mode of action of HAPs, however, remains largely unknown. In this work, using molecular dynamics simulations, we attempted to understand the action of HAP by comparing the dynamics of capsid proteins with and without HAPs. We found that the inhibitor is more stable in higher oligomers. It retains its stability in the hexamer throughout 1 μs of simulation. Our results also show that the inhibitor might help in stabilizing the C-terminus, the HBc 149-183 arginine-rich domain of the capsid protein. The C-termini of dimers interact with each other, assisted by the HAP inhibitor. During capsid assembly, the termini are supposed to directly interact with the viral genome, thereby suggesting that the viral genome might work in a similar way to stabilize the capsid protein. Our results may help in understanding the underlying molecular mechanism of HBV capsid self-assembly, which should be crucial for exploring new drug targets and structure-based drug design.

Newnes electronics assembly pocket book

CERN Document Server

Brindley, Keith

2013-01-01

Produced in association with the Engineering Training Authority with contributions from dozens of people in the electronics industry. The material covers common skills in electrical and electronic engineering and concentrates mainly on wiring and assembly. 'Newnes Electronics Assembly Pocket Book' is for electronics technicians, students and apprentices.

System and method for controlling a combustor assembly

Science.gov (United States)

York, William David; Ziminsky, Willy Steve; Johnson, Thomas Edward; Stevenson, Christian Xavier

2013-03-05

A system and method for controlling a combustor assembly are disclosed. The system includes a combustor assembly. The combustor assembly includes a combustor and a fuel nozzle assembly. The combustor includes a casing. The fuel nozzle assembly is positioned at least partially within the casing and includes a fuel nozzle. The fuel nozzle assembly further defines a head end. The system further includes a viewing device configured for capturing an image of at least a portion of the head end, and a processor communicatively coupled to the viewing device, the processor configured to compare the image to a standard image for the head end.

A classification scheme for LWR fuel assemblies

Energy Technology Data Exchange (ETDEWEB)

Moore, R.S.; Williamson, D.A.; Notz, K.J.

1988-11-01

With over 100 light water nuclear reactors operating nationwide, representing designs by four primary vendors, and with reload fuel manufactured by these vendors and additional suppliers, a wide variety of fuel assembly types are in existence. At Oak Ridge National Laboratory, both the Systems Integration Program and the Characteristics Data Base project required a classification scheme for these fuels. This scheme can be applied to other areas and is expected to be of value to many Office of Civilian Radioactive Waste Management programs. To develop the classification scheme, extensive information on the fuel assemblies that have been and are being manufactured by the various nuclear fuel vendors was compiled, reviewed, and evaluated. It was determined that it is possible to characterize assemblies in a systematic manner, using a combination of physical factors. A two-stage scheme was developed consisting of 79 assembly types, which are grouped into 22 assembly classes. The assembly classes are determined by the general design of the reactor cores in which the assemblies are, or were, used. The general BWR and PWR classes are divided differently but both are based on reactor core configuration. 2 refs., 15 tabs.

NUPEC proves reliability of LWR fuel assemblies

International Nuclear Information System (INIS)

Anon.

1987-01-01

It is very important in assuring the safety of nuclear reactors to confirm the reliability of fuel assemblies. The test program of the Nuclear Power Engineering Center on the reliability of fuel assemblies has verified the high performance and reliability of Japanese LWR fuels, and confirmed the propriety of their design and fabrication. This claim is based on the data obtained from the fuel assemblies irradiated in commercial reactors. The NUPEC program includes irradiation test which has been conducted for 11 years since fiscal 1976, and the maximum thermal loading test using the out of pile test facilities simulating a real reactor which has been continued since fiscal 1978. The irradiation test on BWR fuel assemblies in No.3 reactor in Fukushima No.1 Nuclear Power Station, Tokyo Electric Power Co., Inc., and on PWR fuel assemblies in No.3 reactor in Mihama Power Station, Kansai Electric Power Co., Inc., and the maximum thermal loading test on BWR and PWR fuel assemblies are reported. The series of postirradiation examination of the fuel assemblies used for commercial reactors was conducted for the first time in Japan, and the highly systematic data on 27 items were obtained. (Kako, I.)

A classification scheme for LWR fuel assemblies

International Nuclear Information System (INIS)

Moore, R.S.; Williamson, D.A.; Notz, K.J.

1988-11-01

With over 100 light water nuclear reactors operating nationwide, representing designs by four primary vendors, and with reload fuel manufactured by these vendors and additional suppliers, a wide variety of fuel assembly types are in existence. At Oak Ridge National Laboratory, both the Systems Integration Program and the Characteristics Data Base project required a classification scheme for these fuels. This scheme can be applied to other areas and is expected to be of value to many Office of Civilian Radioactive Waste Management programs. To develop the classification scheme, extensive information on the fuel assemblies that have been and are being manufactured by the various nuclear fuel vendors was compiled, reviewed, and evaluated. It was determined that it is possible to characterize assemblies in a systematic manner, using a combination of physical factors. A two-stage scheme was developed consisting of 79 assembly types, which are grouped into 22 assembly classes. The assembly classes are determined by the general design of the reactor cores in which the assemblies are, or were, used. The general BWR and PWR classes are divided differently but both are based on reactor core configuration. 2 refs., 15 tabs

Gravity in the Century of Light: The Gravitation Theory of Georges-Louis Le Sage

Science.gov (United States)

Evans, James

2006-05-01

Each generation of physicists, or natural philosophers, has sought to place universal gravitation in the context of its own worldview. Often this has entailed an effort to reduce gravitation to something more fundamental. But what is deemed fundamental has, of course, changed with time. Each generation attacked the problem of universal gravitation with the tools of its day and brought to bear the concepts of its own standard model. The most successful eighteenth-century attempt to provide a mechanical explanation of gravity was that of Georges-Louis Le Sage (1724-1803) of Geneva. Le Sage postulated a sea of ultramundane corpuscles, streaming in all directions and characterized by minute mass, great velocity, and complete inelasticity. Mostly these corpuscles just pass through gross bodies such as apples or planets, but a few are absorbed, leading to all the phenomena of attraction. In a voluminous correspondence with nearly all the savants of the day, Le Sage constantly reshaped his arguments for his system in order to appeal to metaphysicians, mechanicians and Newtonians of several varieties. Le Sage's theory is an especially interesting one, for several reasons. First, it serves as the prototype of a dynamical explanation of Newtonian gravity. Second, the theory came quite close to accomplishing its aim. Third, the theory had a long life and attracted comment by the leading physical thinkers of several successive generations, including Laplace, Kelvin, Maxwell and Feynman. Le Sage's theory therefore provides an excellent opportunity for the study of the evolution of attitudes toward physical explanation. The effects of national style in science and generational change take on a new clarity.

Shock absorbing structure for nuclear fuel assemblies

International Nuclear Information System (INIS)

Jabsen, F.S.

1981-01-01

A hydraulic apparatus is described that absorbs shocks that may be applied to fuel assemblies. Spring pads mounted on the upper end fittings of the fuel assemblies have plungers that move within hollow guide posts attached to the upper grids of the fuel assemblies. (L.L.)

Parameters calculation of fuel assembly with complex geometry

International Nuclear Information System (INIS)

Wu Hongchun; Ju Haitao; Yao Dong

2006-01-01

The code DRAGON was developed for CANDU reactor by Ecole Polytechnique de Montreal of Canada. In order to validate the DRAGON code's applicability for complex geometry fuel assembly calculation, the rod shape fuel assembly of PWR benchmark problem and the plate shape fuel assembly of MTR benchmark problem were analyzed by DRAGON code. Some other shape fuel assemblies were also discussed simply. Calculation results show that the DRAGON code can be used to calculate variform fuel assembly and the precision is high. (authors)

Fuel assemblies for use in nuclear reactors

International Nuclear Information System (INIS)

Mochida, Takaaki.

1987-01-01

Purpose: To increase the plutonium utilization amount and improve the uranium-saving effect in the fuel assemblies of PWR type reactor using mixed uranium-plutonium oxides. Constitution: MOX fuel rods comprising mixed plutonium-uranium oxides are disposed to the outer circumference of a fuel assembly and uranium fuel rods only composed of uranium oxides are disposed to the central portion thereof. In such a fuel assembly, since the uranium fuel rods are present at the periphery of the control rod, the control rod worth is the same as that of the uranium fuel assembly in the prior art. Further, since about 25 % of the entire fuel rods is composed of the MOX fuel rods, the plutonium utilization amount is increased. Further, since the MOX fuel rods at low enrichment degree are present at the outer circumferential portion, mismatching at the boundary to the adjacent MOX fuel assembly is reduced and the problem of local power peaking increase in the MOX fuel assembly is neither present. (Kamimura, M.)

3D Assembly Group Analysis for Cognitive Automation

Directory of Open Access Journals (Sweden)

Christian Brecher

2012-01-01

Full Text Available A concept that allows the cognitive automation of robotic assembly processes is introduced. An assembly cell comprised of two robots was designed to verify the concept. For the purpose of validation a customer-defined part group consisting of Hubelino bricks is assembled. One of the key aspects for this process is the verification of the assembly group. Hence a software component was designed that utilizes the Microsoft Kinect to perceive both depth and color data in the assembly area. This information is used to determine the current state of the assembly group and is compared to a CAD model for validation purposes. In order to efficiently resolve erroneous situations, the results are interactively accessible to a human expert. The implications for an industrial application are demonstrated by transferring the developed concepts to an assembly scenario for switch-cabinet systems.

Onset of self-assembly

International Nuclear Information System (INIS)

Chitanvis, S.M.

1998-01-01

We have formulated a theory of self-assembly based on the notion of local gauge invariance at the mesoscale. Local gauge invariance at the mesoscale generates the required long-range entropic forces responsible for self-assembly in binary systems. Our theory was applied to study the onset of mesostructure formation above a critical temperature in estane, a diblock copolymer. We used diagrammatic methods to transcend the Gaussian approximation and obtain a correlation length ξ∼(c-c * ) -γ , where c * is the minimum concentration below which self-assembly is impossible, c is the current concentration, and γ was found numerically to be fairly close to 2/3. The renormalized diffusion constant vanishes as the critical concentration is approached, indicating the occurrence of critical slowing down, while the correlation function remains finite at the transition point. copyright 1998 The American Physical Society

Assembling draft genomes using contiBAIT

OpenAIRE

O'Neill, Kieran; Hills, Mark; Gottlieb, Mike; Borkowski, Matthew; Karsan, Aly; Lansdorp, Peter M.

2017-01-01

A Summary: Massively parallel sequencing is now widely used, but data interpretation is only as good as the reference assembly to which it is aligned. While the number of reference assemblies has rapidly expanded, most of these remain at intermediate stages of completion, either as scaffold builds, or as chromosome builds (consisting of correctly ordered, but not necessarily correctly oriented scaffolds separated by gaps). Completion of de novo assemblies remains difficult, as regions that ar...

31 CFR 500.554 - Gifts of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin.

Science.gov (United States)

2010-07-01

... Vietnamese, Cambodian, or South Vietnamese origin. 500.554 Section 500.554 Money and Finance: Treasury... § 500.554 Gifts of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin. (a) Except as... importation of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin goods sent as gifts to...

In-Pile Section(IPS) Inner Assembly Manufacturing Report

International Nuclear Information System (INIS)

Lee, Jong Min; Shim, Bong Sik; Lee, Chung Yong

2009-12-01

The objective of this report is to present the manufacturing, assembling and testing process of IPS Inner Assembly used in Fuel Test Loop(FTL) pre-operation test. The majority of the manufactured components are test fuels, inner assembly structures and subsidiary tools that is needed during the assembly process. In addition, Mock-up test for the welding and brazing is included at this stage. Lower structure, such as test fuels, fuel carrier legs are assembled and following structures, such as fuel carrier stem in the middle structure, top flange in the top structure are assembled together each other. To Verify the Reactor Coolant Pressure Boundary(RCPB) function in IPS Inner Assembly helium leak test and hydraulic test is performed with its acceptance criteria. According to the ASME III code Authorized Nuclear Inspector(ANI) is required during the hydraulic test. As-built measurement and insulation resistance test are performed to the structures and instrumentations after the test process. All requirements are satisfied and the IPS Inner Assembly was loaded in HANARO IR-1 hole in September 25, 2009

Wide-range light-harvesting donor-acceptor assemblies through specific intergelator interactions via self-assembly.

Science.gov (United States)

Samanta, Suman K; Bhattacharya, Santanu

2012-12-03

We have synthesized two new low-molecular-mass organogelators based on tri-p-phenylene vinylene derivatives, one of which could be designated as the donor whereas the other one is an acceptor. These were prepared specifically to show the intergelator interactions at the molecular level by using donor-acceptor self-assembly to achieve appropriate control over their macroscopic properties. Intermolecular hydrogen-bonding, π-stacking, and van der Waals interactions operate for both the individual components and the mixtures, leading to the formation of gels in the chosen organic solvents. Evidence for intergelator interactions was acquired from various spectroscopic, microscopic, thermal, and mechanical investigations. Due to the photochromic nature of these molecules, interesting photophysical properties, such as solvatochromism and J-type aggregation, were clearly observed. An efficient energy transfer was exhibited by the mixture of donor-acceptor assemblies. An array of four chromophores was built up by inclusion of two known dyes (anthracene and rhodamine 6G) for the energy-transfer studies. Interestingly, an energy-transfer cascade was observed in the assembly of four chromophores in a particular order (anthracene-donor-acceptor-rhodamine 6G), and if one of the components was removed from the assembly the energy transfer process was discontinued. This allowed the build up of a light-harvesting process with a wide range. Excitation at one end produces an emission at the other end of the assembly. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Real-time visualization of perforin nanopore assembly

Science.gov (United States)

Leung, Carl; Hodel, Adrian W.; Brennan, Amelia J.; Lukoyanova, Natalya; Tran, Sharon; House, Colin M.; Kondos, Stephanie C.; Whisstock, James C.; Dunstone, Michelle A.; Trapani, Joseph A.; Voskoboinik, Ilia; Saibil, Helen R.; Hoogenboom, Bart W.

2017-05-01

Perforin is a key protein of the vertebrate immune system. Secreted by cytotoxic lymphocytes as soluble monomers, perforin can self-assemble into oligomeric pores of 10-20 nm inner diameter in the membranes of virus-infected and cancerous cells. These large pores facilitate the entry of pro-apoptotic granzymes, thereby rapidly killing the target cell. To elucidate the pathways of perforin pore assembly, we carried out real-time atomic force microscopy and electron microscopy studies. Our experiments reveal that the pore assembly proceeds via a membrane-bound prepore intermediate state, typically consisting of up to approximately eight loosely but irreversibly assembled monomeric subunits. These short oligomers convert to more closely packed membrane nanopore assemblies, which can subsequently recruit additional prepore oligomers to grow the pore size.

Method and apparatus for assembling permanent magnet rotors

Science.gov (United States)

Hsu, J.S.; Adams, D.J.

1999-06-22

A permanent magnet assembly for assembly in large permanent magnet motors and generators includes a two-piece carrier that can be slid into a slot in the rotor and then secured in place using a set screw. The invention also provides an auxiliary carrier device with guide rails that line up with the teeth of the rotor, so that a permanent magnet assembly can be pushed first into a slot, and then down the slot to its proper location. An auxiliary tool is provided to move the permanent magnet assembly into position in the slot before it is secured in place. Methods of assembling and disassembling the magnet assemblies in the rotor are also disclosed. 2 figs.

Illustrating how mechanical assemblies work

KAUST Repository

Mitra, Niloy J.; Yang, Yongliang; Yan, Dongming; Li, Wilmot; Agrawala, Maneesh

2013-01-01

How-things-work visualizations use a variety of visual techniques to depict the operation of complex mechanical assemblies. We present an automated approach for generating such visualizations. Starting with a 3D CAD model of an assembly, we first infer the motions of the individual parts and the interactions across the parts based on their geometry and a few user-specified constraints. We then use this information to generate visualizations that incorporate motion arrows, frame sequences, and animation to convey the causal chain of motions and mechanical interactions across parts. We demonstrate our system on a wide variety of assemblies. © 2013 ACM 0001-0782/13/01.

Modular nuclear fuel assembly rack

International Nuclear Information System (INIS)

Davis, C.J.

1982-01-01

A modular nuclear fuel assembly rack constructed of an array of identical cells, each cell constructed of a plurality of identical flanged plates. The unique assembly of the plates into a rigid rack provides a cellular compartment for nuclear fuel assemblies and a cavity between the cells for accepting neutron absorbing materials thus allowing a closely spaced array. The modular rack size can be easily adapted to conform with available storage space. U-shaped flanges at the edges of the plates are nested together at the intersection of four cells in the array. A bar is placed at the intersection to lock the cells together

Assembly line performance and modeling

Science.gov (United States)

Rane, Arun B.; Sunnapwar, Vivek K.

2017-09-01

Automobile sector forms the backbone of manufacturing sector. Vehicle assembly line is important section in automobile plant where repetitive tasks are performed one after another at different workstations. In this thesis, a methodology is proposed to reduce cycle time and time loss due to important factors like equipment failure, shortage of inventory, absenteeism, set-up, material handling, rejection and fatigue to improve output within given cost constraints. Various relationships between these factors, corresponding cost and output are established by scientific approach. This methodology is validated in three different vehicle assembly plants. Proposed methodology may help practitioners to optimize the assembly line using lean techniques.

Control rod guide tube assemblies

International Nuclear Information System (INIS)

Jabsen, F.S.

1979-01-01

A nuclear fuel assembly including sleeves telescoped over end portions of control rod guide tubes which bear against internal shoulders of the sleeves. Upper ends of the sleeves protrude beyond a control rod guide tube spider and are locked in place by means of a resilient cellular lattice or lock that is seated in mating grooves in the outer surfaces of the sleeves. A grapple is provided for disengaging the entire lock structure spider and associated washers, springs and a grill from the end of the fuel assembly in order to enable these components to be removed and subsequently replaced on the fuel assembly after inspection and repair. (UK)