Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

Science.gov (United States)

2008-09-01

Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

SciDAC visualization and analytics center for enabling technology

International Nuclear Information System (INIS)

Bethel, E Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci, Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

2007-01-01

The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management

Enabling MEMS technologies for communications systems

Science.gov (United States)

Lubecke, Victor M.; Barber, Bradley P.; Arney, Susanne

2001-11-01

Modern communications demands have been steadily growing not only in size, but sophistication. Phone calls over copper wires have evolved into high definition video conferencing over optical fibers, and wireless internet browsing. The technology used to meet these demands is under constant pressure to provide increased capacity, speed, and efficiency, all with reduced size and cost. Various MEMS technologies have shown great promise for meeting these challenges by extending the performance of conventional circuitry and introducing radical new systems approaches. A variety of strategic MEMS structures including various cost-effective free-space optics and high-Q RF components are described, along with related practical implementation issues. These components are rapidly becoming essential for enabling the development of progressive new communications systems technologies including all-optical networks, and low cost multi-system wireless terminals and basestations.

Radiation technology enabled market access to Indian mango

International Nuclear Information System (INIS)

Sharma, Arun

2009-01-01

International trade in agricultural produce is subject to quarantine barriers imposed by importing countries to limit the entry of exotic pests and pathogens. Radiation technology provides an effective alternative to fumigants which are being gradually phased out. The technology has enabled market access to Indian mangoes in the US market after a gap of 18 years. The technology provides opportunity for export of other fruits and vegetables as well to countries like US, Australia and New Zealand. (author)

Nano-enabled environmental products and technologies - opportunities and drawbacks

DEFF Research Database (Denmark)

Møller Christensen, Frans; Brinch, Anna; Kjølholt, Jesper

The project aims to investigate the benefits for health and environment that the use of nanomaterials in products and technologies may have. More specifically, the project provides an overview of the most relevant nano-enabled environmental technologies, different types of products and technologies...... on the (Danish) market, as well as products and technologies, which are still in R&D and it will provide a qualitative overview of health and environmental pros and cons of these technologies. The project has focused on technologies applied in: 1) purification of water and wastewater, 2) remediation of soil...

Enabling IP Header Compression in COTS Routers via Frame Relay on a Simplex Link

Science.gov (United States)

Nguyen, Sam P.; Pang, Jackson; Clare, Loren P.; Cheng, Michael K.

2010-01-01

NASA is moving toward a networkcentric communications architecture and, in particular, is building toward use of Internet Protocol (IP) in space. The use of IP is motivated by its ubiquitous application in many communications networks and in available commercial off-the-shelf (COTS) technology. The Constellation Program intends to fit two or more voice (over IP) channels on both the forward link to, and the return link from, the Orion Crew Exploration Vehicle (CEV) during all mission phases. Efficient bandwidth utilization of the links is key for voice applications. In Voice over IP (VoIP), the IP packets are limited to small sizes to keep voice latency at a minimum. The common voice codec used in VoIP is G.729. This new algorithm produces voice audio at 8 kbps and in packets of 10-milliseconds duration. Constellation has designed the VoIP communications stack to use the combination of IP/UDP/RTP protocols where IP carries a 20-byte header, UDP (User Datagram Protocol) carries an 8-byte header, and RTP (Real Time Transport Protocol) carries a 12-byte header. The protocol headers total 40 bytes and are equal in length to a 40-byte G.729 payload, doubling the VoIP latency. Since much of the IP/UDP/RTP header information does not change from IP packet to IP packet, IP/UDP/RTP header compression can avoid transmission of much redundant data as well as reduce VoIP latency. The benefits of IP header compression are more pronounced at low data rate links such as the forward and return links during CEV launch. IP/UDP/RTP header compression codecs are well supported by many COTS routers. A common interface to the COTS routers is through frame relay. However, enabling IP header compression over frame relay, according to industry standard (Frame Relay IP Header Compression Agreement FRF.20), requires a duplex link and negotiations between the compressor router and the decompressor router. In Constellation, each forward to and return link from the CEV in space is treated

Enabling Communication and Navigation Technologies for Future Near Earth Science Missions

Science.gov (United States)

Israel, David J.; Heckler, Gregory; Menrad, Robert; Hudiburg, John; Boroson, Don; Robinson, Bryan; Cornwell, Donald

2016-01-01

In 2015, the Earth Regimes Network Evolution Study (ERNESt) proposed an architectural concept and technologies that evolve to enable space science and exploration missions out to the 2040 timeframe. The architectural concept evolves the current instantiations of the Near Earth Network and Space Network with new technologies to provide a global communication and navigation network that provides communication and navigation services to a wide range of space users in the near Earth domain. The technologies included High Rate Optical Communications, Optical Multiple Access (OMA), Delay Tolerant Networking (DTN), User Initiated Services (UIS), and advanced Position, Navigation, and Timing technology. This paper describes the key technologies and their current technology readiness levels. Examples of science missions that could be enabled by the technologies and the projected operational benefits of the architecture concept to missions are also described.

Exploring How Usage-Focused Business Models Enable Circular Economy through Digital Technologies

Directory of Open Access Journals (Sweden)

Gianmarco Bressanelli

2018-02-01

Full Text Available Recent studies advocate that digital technologies are key enabling factors for the introduction of servitized business models. At the same time, these technologies support the implementation of the circular economy (CE paradigm into businesses. Despite this general agreement, the literature still overlooks how digital technologies enable such a CE transition. To fill the gap, this paper develops a conceptual framework, based on the literature and a case study of a company implementing a usage-focused servitized business model in the household appliance industry. This study focuses on the Internet of Things (IoT, Big Data, and analytics, and identifies eight specific functionalities enabled by such technologies (improving product design, attracting target customers, monitoring and tracking product activity, providing technical support, providing preventive and predictive maintenance, optimizing the product usage, upgrading the product, enhancing renovation and end-of-life activities. By investigating how these functionalities affect three CE value drivers (increasing resource efficiency, extending lifespan, and closing the loop, the conceptual framework developed in this paper advances knowledge about the role of digital technologies as an enabler of the CE within usage-focused business models. Finally, this study shows how digital technologies help overcome the drawback of usage-focused business models for the adoption of CE pointed out by previous literature.

Key enabling technologies (Kets) observatory. Second report December 2015

OpenAIRE

Velde, Els van de; Pieterjan, Debergh; Wydra, Sven; Som, Oliver; Heide, Marcel de

2015-01-01

Key Enabling Technologies (KETs) provide the basis for innovation in a wide range of products and processes across all industrial sectors (emerging and traditional) and are essential to solve Europe’s major societal challenges. Six KETs have been identified as important for Europe’s future competitiveness: Advanced Manufacturing Technology, Advanced Materials, Nanotechnology, Micro- and Nanoelectronics, Industrial Biotechnology, and Photonics.

Concept relation discovery and innovation enabling technology (CORDIET)

NARCIS (Netherlands)

Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

2011-01-01

Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

Health and aged care enabled by information technology.

Science.gov (United States)

Soar, Jeffrey; Seo, Youngjoon

2007-10-01

One of the challenges facing health and welfare policymakers as well as researchers in most developed countries is the increasing demand for aging services and aged care. Low birth rates and rapid increases in the percentages of elderly people make aging and aged care one of the top-priority issues among the national agenda of many countries. The responses of governments have included initiatives to extend productive working lives and promote self-funded retirement; to promote healthy, active aging; and to encourage more care to be delivered in home and community settings. Technology will be a major enabler of these strategies. People requiring health services are increasingly being offered more care in their own homes and community settings as an alternative to hospital admission and to delay or avoid moving into institutional care. Research is providing intelligent technology to enable care in the home as well as to monitor safety, security, and quality. Innovation will provide greater independence and better access to care in their own homes for the elderly, sufferers of chronic illness, and persons with disability and reduce the incidence of hospital admissions and the length of stay when admissions do occur. Technologies will support families and professional caregivers and are expected to reduce costs. This paper reports on developments in technology to support care for the aged in home and community settings.

Enabling Technologies for Ultra-Safe and Secure Modular Nuclear Energy

International Nuclear Information System (INIS)

Mendez Cruz, Carmen Margarita; Rochau, Gary E.; Middleton, Bobby; Rodriguez, Salvador B.; Rodriguez, Carmelo; Schleicher, Robert

2016-01-01

Sandia National Laboratories and General Atomics are pleased to respond to the Advanced Research Projects Agency-Energy (ARPA-e)'s request for information on innovative developments that may overcome various current reactor-technology limitations. The RFI is particularly interested in innovations that enable ultra-safe and secure modular nuclear energy systems. Our response addresses the specific features for reactor designs called out in the RFI, including a brief assessment of the current state of the technologies that would enable each feature and the methods by which they could be best incorporated into a reactor design.

Enabling Technologies for Ultra-Safe and Secure Modular Nuclear Energy

Energy Technology Data Exchange (ETDEWEB)

Mendez Cruz, Carmen Margarita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rochau, Gary E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Middleton, Bobby [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodriguez, Salvador B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodriguez, Carmelo [General Atomics, San Diego, CA (United States); Schleicher, Robert [General Atomics, San Diego, CA (United States)

2016-06-01

Sandia National Laboratories and General Atomics are pleased to respond to the Advanced Research Projects Agency-Energy (ARPA-e)’s request for information on innovative developments that may overcome various current reactor-technology limitations. The RFI is particularly interested in innovations that enable ultra-safe and secure modular nuclear energy systems. Our response addresses the specific features for reactor designs called out in the RFI, including a brief assessment of the current state of the technologies that would enable each feature and the methods by which they could be best incorporated into a reactor design.

A Classification Framework for Exploring Technology-Enabled Practice--Frame TEP

Science.gov (United States)

Prestridge, Sarah; de Aldama, Carlos

2016-01-01

This article theorizes the construction of a classification framework to explore teachers' beliefs and pedagogical practices for the use of digital technologies in the classroom. There are currently many individual schemas and models that represent both developmental and divergent concepts associated with technology-enabled practice. This article…

A conceptual framework for technology-enabled and technology-dependent user behavior toward device mesh and mesh app

Directory of Open Access Journals (Sweden)

Ming-Hsiung Hsiao

2018-06-01

Full Text Available The device mesh and mesh app revealed by Gartner as the future strategic technology trend are able to predict people's need from their historic data, then provides the needed services or service innovation to support their activity engagement. However, many theories have identified that it is the motivation, rather than technology, that drives people to engage in activities or tasks. For this reason, this study builds a conceptual framework by integrating the extant logic and theories to explore how future technology would generate benefits for people. It integrates task-technology fit (TTF model and motivation theory (mainly expectancy-value theory to explain such technology user behavior. It also points out the difference between technology-enabled and technology-dependent user behavior and concludes that too much emphasis on the role of technology with too little attention on motivation would distort technology user behavior, and the role of technology as well. Keywords: Device mesh, Mesh app, Expectancy-value theory, Task-technology fit (TTF, Technology-enabled user, Technology-dependent user

The effect of technology-enabled active learning on undergraduate students understanding of electromagnetism

International Nuclear Information System (INIS)

Dori, Y.J.

2005-01-01

Full Text:The Technology-Enabled Active Learning Project at the Massachusetts Institute of Technology (MIT) involves media-rich software for simulation and visualization in freshman physics carried out in a specially redesigned classroom to facilitate group interaction. These technology-based learning materials are especially useful in electromagnetism to help students conceptualize phenomena and processes. This study analyzes the effects of the unique learning environment of the Technology-Enabled Active Learning Project project on students cognitive and affective outcomes. The assessment of the project included examining students conceptual understanding before and after studying electromagnetism in a media-rich environment. We also investigated the effect of this environment on students preferences regarding the various teaching methods. As part of the project, we developed pre- and post-tests consisting of conceptual questions from standardized tests, as well as questions designed to assess the effect of visualizations and experiments. The research population consisted of 811 undergraduate students. It consisted of a small- and a large-scale experimental groups and a control group. Technology-Enabled Active Learning Project students improved their conceptual understanding concepts of the subject matter to a significantly higher extent than their control group peers. A majority of the students in the small-scale experiment noted that they would recommend the Technology-Enabled Active Learning Project course to fellow students, indicating the benefits of inter activity, visualization, and hands-on experiments, which the technology helped enable. In the large-scale implementation students expressed both positive and negative attitudes in the course survey

ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

Science.gov (United States)

Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

2017-01-01

Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

Distributed Collaborative Learning Communities Enabled by Information Communication Technology

NARCIS (Netherlands)

H.L. Alvarez (Heidi Lee)

2006-01-01

textabstractHow and why can Information Communication Technology (ICT) contribute to enhancing learning in distributed Collaborative Learning Communities (CLCs)? Drawing from relevant theories concerned with phenomenon of ICT enabled distributed collaborative learning, this book identifies gaps in

Enabling technologies for industrial energy demand management

International Nuclear Information System (INIS)

Dyer, Caroline H.; Hammond, Geoffrey P.; Jones, Craig I.; McKenna, Russell C.

2008-01-01

This state-of-science review sets out to provide an indicative assessment of enabling technologies for reducing UK industrial energy demand and carbon emissions to 2050. In the short term, i.e. the period that will rely on current or existing technologies, the road map and priorities are clear. A variety of available technologies will lead to energy demand reduction in industrial processes, boiler operation, compressed air usage, electric motor efficiency, heating and lighting, and ancillary uses such as transport. The prospects for the commercial exploitation of innovative technologies by the middle of the 21st century are more speculative. Emphasis is therefore placed on the range of technology assessment methods that are likely to provide policy makers with a guide to progress in the development of high-temperature processes, improved materials, process integration and intensification, and improved industrial process control and monitoring. Key among the appraisal methods applicable to the energy sector is thermodynamic analysis, making use of energy, exergy and 'exergoeconomic' techniques. Technical and economic barriers will limit the improvement potential to perhaps a 30% cut in industrial energy use, which would make a significant contribution to reducing energy demand and carbon emissions in UK industry. Non-technological drivers for, and barriers to, the take-up of innovative, low-carbon energy technologies for industry are also outlined

VACET: Proposed SciDAC2 Visualization and Analytics Center for Enabling Technologies

International Nuclear Information System (INIS)

Bethel, W; Johnson, C; Hansen, C; Parker, S; Sanderson, A; Silva, C; Tricoche, X; Pascucci, V; Childs, H; Cohen, J; Duchaineau, M; Laney, D; Lindstrom, P; Ahern, S; Meredith, J; Ostrouchov, G; Joy, K; Hamann, B

2006-01-01

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang',' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies

Designing Technology-Enabled Instruction to Utilize Learning Analytics

Science.gov (United States)

Davies, Randall; Nyland, Robert; Bodily, Robert; Chapman, John; Jones, Brian; Young, Jay

2017-01-01

A key notion conveyed by those who advocate for the use of data to enhance instruction is an awareness that learning analytics has the potential to improve instruction and learning but is not currently reaching that potential. Gibbons (2014) suggested that a lack of learning facilitated by current technology-enabled instructional systems may be…

The Role of Technology as an Enabler in Job Redesign

Directory of Open Access Journals (Sweden)

David M. Savino

2009-10-01

Full Text Available This paper is an acknowledgement of the role of technology as an enabler that encourages the constant need to evaluate, update and employ changing job descriptions and business processes that truly acknowledge job requirements as they are versus notions of what they have been or should be. Advancements in technology have brought about a significant amount of change in terms of how we go about doing our daily work. The evolution from being a manufacturing economy to being information and service based brought to the workplace new realities and responsibilities. As a result, workers can no longer expect to be given a specific listing of assigned duties and tasks that remain fixed over a long period of time. The new paradigm in the workplace relies on continuous demands for improvement and acquired knowledge in a dynamic environment. The catalyst that enables continuous improvement is technology.

Miniaturized Power Processing Unit Study: A Cubesat Electric Propulsion Technology Enabler Project

Science.gov (United States)

Ghassemieh, Shakib M.

2014-01-01

This study evaluates High Voltage Power Processing Unit (PPU) technology and driving requirements necessary to enable the Microfluidic Electric Propulsion technology research and development by NASA and university partners. This study provides an overview of the state of the art PPU technology with recommendations for technology demonstration projects and missions for NASA to pursue.

PACFEST 2004 : enabling technologies for maritime security in the Pacific region.

Energy Technology Data Exchange (ETDEWEB)

Moore, Judy Hennessey; Whitley, John B.; Chellis, Craig (Pacific Disaster Center, Kihei, HI)

2005-06-01

In October of 2003 experts involved in various aspects of homeland security from the Pacific region met to engage in a free-wheeling discussion and brainstorming (a 'fest') on the role that technology could play in winning the war on terrorism in the Pacific region. The result was a concise and relatively thorough definition of the terrorism problem in the Pacific region, emphasizing the issues unique to Island nations in the Pacific setting, along with an action plan for developing working demonstrations of advanced technological solutions to these issues. Since PacFest 2003, the maritime dimensions of the international security environment have garnered increased attention and interest. To this end, PacFest 2004 sought to identify gaps and enabling technologies for maritime domain awareness and responsive decision-making in the Asia-Pacific region. The PacFest 2004 participants concluded that the technologies and basic information building blocks exist to create a system that would enable the Pacific region government and private organizations to effectively collaborate and share their capabilities and information concerning maritime security. The proposed solution summarized in this report integrates national environments in real time, thereby enabling effective prevention and first response to natural and terrorist induced disasters through better use of national and regional investments in people, infrastructure, systems, processes and standards.

Missing Links: Gender Equity in Science and Technology for ...

International Development Research Centre (IDRC) Digital Library (Canada)

Missing Links: Gender Equity in Science and Technology for Development. Book cover ... Gender Working Group of the United Nations Commission on Science and Technology for Development. Publisher(s): ... Knowledge. Innovation.

Broadband integrated mid infrared light sources as enabling technology for point of care mid-infrared spectroscopy

Science.gov (United States)

2017-08-20

AFRL-AFOSR-JP-TR-2017-0061 Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy Alex...mid-infrared light sources as enabling technology for point-of-care mid-infrared spectroscopy 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-16-1-4037...Broadband integrated mid-infrared light sources as enabling technology for point-of-care mid- infrared spectroscopy ” Date: 16th August 2017 Name

Enabling fast charging – A battery technology gap assessment

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Shabbir; Bloom, Ira; Jansen, Andrew N.; Tanim, Tanvir; Dufek, Eric J.; Pesaran, Ahmad; Burnham, Andrew; Carlson, Richard B.; Dias, Fernando; Hardy, Keith; Keyser, Matthew; Kreuzer, Cory; Markel, Anthony; Meintz, Andrew; Michelbacher, Christopher; Mohanpurkar, Manish; Nelson, Paul A.; Robertson, David C.; Scoffield, Don; Shirk, Matthew; Stephens, Thomas; Vijayagopal, Ram; Zhang, Jiucai

2017-11-01

The battery technology literature is reviewed, with an emphasis on key elements that limit extreme fast charging. Key gaps in existing elements of the technology are presented as well as developmental needs. Among these needs are advanced models and methods to detect and prevent lithium plating; new positive-electrode materials which are less prone to stress-induced failure; better electrode designs to accommodate very rapid diffusion in and out of the electrode; measure temperature distributions during fast charge to enable / validate models; and develop thermal management and pack designs to accommodate the higher operating voltage.

Multi-dimensional technology-enabled social learning approach

DEFF Research Database (Denmark)

Petreski, Hristijan; Tsekeridou, Sofia; Prasad, Neeli R.

2013-01-01

’t respond to this systemic and structural changes and/or challenges and retains its status quo than it is jeopardizing its own existence or the existence of the education, as we know it. This paper aims to precede one step further by proposing a multi-dimensional approach for technology-enabled social...... in learning while socializing within their learning communities. However, their “educational” usage is still limited to facilitation of online learning communities and to collaborative authoring of learning material complementary to existing formal (e-) learning services. If the educational system doesn...

Health-enabling technologies for pervasive health care: on services and ICT architecture paradigms.

Science.gov (United States)

Haux, Reinhold; Howe, Jurgen; Marschollek, Michael; Plischke, Maik; Wolf, Klaus-Hendrik

2008-06-01

Progress in information and communication technologies (ICT) is providing new opportunities for pervasive health care services in aging societies. To identify starting points of health-enabling technologies for pervasive health care. To describe typical services of and contemporary ICT architecture paradigms for pervasive health care. Summarizing outcomes of literature analyses and results from own research projects in this field. Basic functions for pervasive health care with respect to home care comprise emergency detection and alarm, disease management, as well as health status feedback and advice. These functions are complemented by optional (non-health care) functions. Four major paradigms for contemporary ICT architectures are person-centered ICT architectures, home-centered ICT architectures, telehealth service-centered ICT architectures and health care institution-centered ICT architectures. Health-enabling technologies may lead to both new ways of living and new ways of health care. Both ways are interwoven. This has to be considered for appropriate ICT architectures of sensor-enhanced health information systems. IMIA, the International Medical Informatics Association, may be an appropriate forum for interdisciplinary research exchange on health-enabling technologies for pervasive health care.

Rule representation using linked data technologies

NARCIS (Netherlands)

Zhang, C.; Beetz, J.

2016-01-01

In this paper, we report a prototype rule checking system based on Semantic Web and Linked Data technologies. This research aims to find a method to represent rules outside of specific systems, and can be used to integrate and share them among different organizations. In this system we propose to

Heat Treatment Used to Strengthen Enabling Coating Technology for Oil-Free Turbomachinery

Science.gov (United States)

Edmonds, Brian J.; DellaCorte, Christopher

2002-01-01

The PS304 high-temperature solid lubricant coating is a key enabling technology for Oil- Free turbomachinery propulsion and power systems. Breakthroughs in the performance of advanced foil air bearings and improvements in computer-based finite element modeling techniques are the key technologies enabling the development of Oil-Free aircraft engines being pursued by the Oil-Free Turbomachinery team at the NASA Glenn Research Center. PS304 is a plasma spray coating applied to the surface of shafts operating against foil air bearings or in any other component requiring solid lubrication at high temperatures, where conventional materials such as graphite cannot function.

HTS machines as enabling technology for all-electric airborne vehicles

International Nuclear Information System (INIS)

Masson, P J; Brown, G V; Soban, D S; Luongo, C A

2007-01-01

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development

HTS machines as enabling technology for all-electric airborne vehicles

Energy Technology Data Exchange (ETDEWEB)

Masson, P J [FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, FL 32310 (United States); Brown, G V [NASA Glenn Research Center, Cleveland, OH (United States); Soban, D S [Aerospace System Design Laboratory/Georgia Tech, Atlanta, GA 32332 (United States); Luongo, C A [FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, FL 32310 (United States)

2007-08-15

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

Enabling Technologies for Characterizing Exoplanet Systems with Exo-C

Science.gov (United States)

Cahoy, Kerri Lynn; Belikov, Ruslan; Stapelfeldt, Karl R.; Chakrabarti, Supriya; Trauger, John T.; Serabyn, Eugene; McElwain, Michael W.; Pong, Christopher M.; Brugarolas, Paul

2015-01-01

The Exoplanet Science and Technology Definition Team's Internal Coronagraph mission design, called 'Exo-C', utilizes several technologies that have advanced over the past decade with support from the Exoplanet Exploration Program. Following the flow of photons through the telescope, the science measurement is enabled by (i) a precision pointing system to keep the target exoplanet system precisely positioned on the detector during the integration time, (ii) high-performance coronagraphs to block the parent star's light so that the planet's reflected light can be detected, (iii) a wavefront control system to compensate for any wavefront errors such as those due to thermal or mechanical deformations in the optical path, especially errors with high spatial frequencies that could cause contrast-reducing speckles, and (iv) an integral field spectrograph (IFS) that provides moderate resolution spectra of the target exoplanets, permitting their characterization and comparison with models and other data sets. Technologies such as the wavefront control system and coronagraphs will also benefit from other funded efforts in progress, such as the Wide Field Infrared Survey Telescope Astrophysics Focused Telescope Assets (WFIRST-AFTA) program. Similarly, the Exo-C IFS will benefit from the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) demonstration. We present specific examples for each of these technologies showing that the state of the art has advanced to levels that will meet the overall scientific, cost, and schedule requirements of the Exo-C mission. These capabilities have matured with testbed and/or ground-telescope demonstrations and have reached a technological readiness level (TRL) that supports their inclusion in the baseline design for potential flight at the end of this decade. While additional work remains to build and test flight-like components (that concurrently meet science as well as size, weight, power, and environmental

The Value of RFID Technology Enabled Information to Manage Perishables

NARCIS (Netherlands)

M.E. Ketzenberg (Michael); J.M. Bloemhof-Ruwaard (Jacqueline)

2009-01-01

textabstractWe address the value of RFID technology enabled information to manage perishables in the context of a supplier that sells a random lifetime product subject to stochastic demand and lost sales. The product's lifetime is largely determined by the time and temperature history in the supply

Enabling cross-disciplinary research by linking data to Open Access publications

Science.gov (United States)

Rettberg, N.

2012-04-01

OpenAIREplus focuses on the linking of research data to associated publications. The interlinking of research objects has implications for optimising the research process, allowing the sharing, enrichment and reuse of data, and ultimately serving to make open data an essential part of first class research. The growing call for more concrete data management and sharing plans, apparent at funder and national level, is complemented by the increasing support for a scientific infrastructure that supports the seamless access to a range of research materials. This paper will describe the recently launched OpenAIREplus and will detail how it plans to achieve its goals of developing an Open Access participatory infrastructure for scientific information. OpenAIREplus extends the current collaborative OpenAIRE project, which provides European researchers with a service network for the deposit of peer-reviewed FP7 grant-funded Open Access publications. This new project will focus on opening up the infrastructure to data sources from subject-specific communities to provide metadata about research data and publications, facilitating the linking between these objects. The ability to link within a publication out to a citable database, or other research data material, is fairly innovative and this project will enable users to search, browse, view, and create relationships between different information objects. In this regard, OpenAIREplus will build on prototypes of so-called "Enhanced Publications", originally conceived in the DRIVER-II project. OpenAIREplus recognizes the importance of representing the context of publications and datasets, thus linking to resources about the authors, their affiliation, location, project data and funding. The project will explore how links between text-based publications and research data are managed in different scientific fields. This complements a previous study in OpenAIRE on current disciplinary practices and future needs for infrastructural

Enabling Laser and Lidar Technologies for NASA's Science and Exploration Mission's Applications

Science.gov (United States)

Singh, Upendra N.; Kavaya, Michael J.

2005-01-01

NASA s Laser Risk Reduction Program, begun in 2002, has achieved many technology advances in only 3.5 years. The recent selection of several lidar proposals for Science and Exploration applications indicates that the LRRP goal of enabling future space-based missions by lowering the technology risk has already begun to be met.

Radio frequency identification enabled wireless sensing for intelligent food logistics.

Science.gov (United States)

Zou, Zhuo; Chen, Qiang; Chen, Qing; Uysal, Ismail; Zheng, Lirong

2014-06-13

Future technologies and applications for the Internet of Things (IoT) will evolve the process of the food supply chain and create added value of business. Radio frequency identifications (RFIDs) and wireless sensor networks (WSNs) have been considered as the key technological enablers. Intelligent tags, powered by autonomous energy, are attached on objects, networked by short-range wireless links, allowing the physical parameters such as temperatures and humidities as well as the location information to seamlessly integrate with the enterprise information system over the Internet. In this paper, challenges, considerations and design examples are reviewed from system, implementation and application perspectives, particularly with focus on intelligent packaging and logistics for the fresh food tracking and monitoring service. An IoT platform with a two-layer network architecture is introduced consisting of an asymmetric tag-reader link (RFID layer) and an ad-hoc link between readers (WSN layer), which are further connected to the Internet via cellular or Wi-Fi. Then, we provide insights into the enabling technology of RFID with sensing capabilities. Passive, semi-passive and active RFID solutions are discussed. In particular, we describe ultra-wideband radio RFID which has been considered as one of the most promising techniques for ultra-low-power and low-cost wireless sensing. Finally, an example is provided in the form of an application in fresh food tracking services and corresponding field testing results.

Methods & tools for publishing & reusing linked open statistical data

NARCIS (Netherlands)

Tambouris, Efthimios; Kalampokis, Evangelos; Janssen, M.F.W.H.A.; Krimmer, Robert; Tarabanis, Konstantinos

2017-01-01

The number of open data available for reuse is rapidly increasing. A large number of these data are numerical thus can be easily visualized. Linked open data technology enables easy reuse and linking of data residing in di.erent locations. In this workshop, we will present a number of

Advanced Exploration Technologies: Micro and Nano Technologies Enabling Space Missions in the 21st Century

Science.gov (United States)

Krabach, Timothy

1998-01-01

Some of the many new and advanced exploration technologies which will enable space missions in the 21st century and specifically the Manned Mars Mission are explored in this presentation. Some of these are the system on a chip, the Computed-Tomography imaging Spectrometer, the digital camera on a chip, and other Micro Electro Mechanical Systems (MEMS) technology for space. Some of these MEMS are the silicon micromachined microgyroscope, a subliming solid micro-thruster, a micro-ion thruster, a silicon seismometer, a dewpoint microhygrometer, a micro laser doppler anemometer, and tunable diode laser (TDL) sensors. The advanced technology insertion is critical for NASA to decrease mass, volume, power and mission costs, and increase functionality, science potential and robustness.

Integration of extracellular RNA profiling data using metadata, biomedical ontologies and Linked Data technologies

Directory of Open Access Journals (Sweden)

Sai Lakshmi Subramanian

2015-08-01

Full Text Available The large diversity and volume of extracellular RNA (exRNA data that will form the basis of the exRNA Atlas generated by the Extracellular RNA Communication Consortium pose a substantial data integration challenge. We here present the strategy that is being implemented by the exRNA Data Management and Resource Repository, which employs metadata, biomedical ontologies and Linked Data technologies, such as Resource Description Framework to integrate a diverse set of exRNA profiles into an exRNA Atlas and enable integrative exRNA analysis. We focus on the following three specific data integration tasks: (a selection of samples from a virtual biorepository for exRNA profiling and for inclusion in the exRNA Atlas; (b retrieval of a data slice from the exRNA Atlas for integrative analysis and (c interpretation of exRNA analysis results in the context of pathways and networks. As exRNA profiling gains wide adoption in the research community, we anticipate that the strategies discussed here will increasingly be required to enable data reuse and to facilitate integrative analysis of exRNA data.

Integration of extracellular RNA profiling data using metadata, biomedical ontologies and Linked Data technologies.

Science.gov (United States)

Subramanian, Sai Lakshmi; Kitchen, Robert R; Alexander, Roger; Carter, Bob S; Cheung, Kei-Hoi; Laurent, Louise C; Pico, Alexander; Roberts, Lewis R; Roth, Matthew E; Rozowsky, Joel S; Su, Andrew I; Gerstein, Mark B; Milosavljevic, Aleksandar

2015-01-01

The large diversity and volume of extracellular RNA (exRNA) data that will form the basis of the exRNA Atlas generated by the Extracellular RNA Communication Consortium pose a substantial data integration challenge. We here present the strategy that is being implemented by the exRNA Data Management and Resource Repository, which employs metadata, biomedical ontologies and Linked Data technologies, such as Resource Description Framework to integrate a diverse set of exRNA profiles into an exRNA Atlas and enable integrative exRNA analysis. We focus on the following three specific data integration tasks: (a) selection of samples from a virtual biorepository for exRNA profiling and for inclusion in the exRNA Atlas; (b) retrieval of a data slice from the exRNA Atlas for integrative analysis and (c) interpretation of exRNA analysis results in the context of pathways and networks. As exRNA profiling gains wide adoption in the research community, we anticipate that the strategies discussed here will increasingly be required to enable data reuse and to facilitate integrative analysis of exRNA data.

Organic electronics: materials, technology and circuit design developments enabling new applications

NARCIS (Netherlands)

Leeuw, de D.M.; Cantatore, E.

2009-01-01

Organic electronics is growing to become an important new field in the global electronics market. RFID labels, flexible displays, solar cells, OLED-based lighting and displays are only some of the innovative products enabled by technologies based on organic semiconductors. Starting from a short

Can Mobile Technology Enable Knowledge Communication in a Learning Environment?

DEFF Research Database (Denmark)

Kampf, Constance; Islas Sedano, Carolina

2008-01-01

this mobile phone game to help next years' students navigated the CampusNet system in order to study for the exam.  The CampusNet system can be seen as a knowledge management technology situated within the social context of the Project Management course, and so the examples offered, in effect, demonstrate...... To be effective, knowledge management systems need to encompass both social processes and technical components (McDermott 2000),   On the other hand, knowledge communication as a concept has emerged not from the inspiration of technology, but partly from the social-technical challenge of dealing...... with technology in knowledge management systems.  So, is knowledge communication a process that can be technologically enabled?  In this presentation, we explore the possibilities of socio-technical interaction for knowledge communication through the use of a mobile phone game as a knowledge communication tool...

Future research in technological enablers for knowledge management: A worldwide expert study

DEFF Research Database (Denmark)

Sarka, Peter; Caldwell, Nicholas H. M.; Ipsen, Christine

2014-01-01

Information Technology (IT) is widely considered as an important part of knowledge management (KM). However, failures of KM in organisational practice have been attributed to an overemphasis of IT in KM. An improved understanding of the role of IT within KM in organisations could help to improve...... key research themes articulated by the KM experts to enhance and develop KM in relation to technological enablers....

Research Data Reusability: Conceptual Foundations, Barriers and Enabling Technologies

Directory of Open Access Journals (Sweden)

Costantino Thanos

2017-01-01

Full Text Available High-throughput scientific instruments are generating massive amounts of data. Today, one of the main challenges faced by researchers is to make the best use of the world’s growing wealth of data. Data (reusability is becoming a distinct characteristic of modern scientific practice. By data (reusability, we mean the ease of using data for legitimate scientific research by one or more communities of research (consumer communities that is produced by other communities of research (producer communities. Data (reusability allows the reanalysis of evidence, reproduction and verification of results, minimizing duplication of effort, and building on the work of others. It has four main dimensions: policy, legal, economic and technological. The paper addresses the technological dimension of data reusability. The conceptual foundations of data reuse as well as the barriers that hamper data reuse are presented and discussed. The data publication process is proposed as a bridge between the data author and user and the relevant technologies enabling this process are presented.

A review of the Technologies Enabling Agile Manufacturing program

Energy Technology Data Exchange (ETDEWEB)

Gray, W.H.; Neal, R.E.; Cobb, C.K.

1996-10-01

Addressing a technical plan developed in consideration with major US manufacturers, software and hardware providers, and government representatives, the Technologies Enabling Agile Manufacturing (TEAM) program is leveraging the expertise and resources of industry, universities, and federal agencies to develop, integrate, and deploy leap-ahead manufacturing technologies. One of the TEAM program`s goals is to transition products from design to production faster, more efficiently, and at less cost. TEAM`s technology development strategy also provides all participants with early experience in establishing and working within an electronic enterprise that includes access to high-speed networks and high-performance computing and storage systems. The TEAM program uses the cross-cutting tools it collects, develops, and integrates to demonstrate and deploy agile manufacturing capabilities for three high-priority processes identified by industry: material removal, sheet metal forming, electro-mechanical assembly. This paper reviews the current status of the TEAM program with emphasis upon TEAM`s information infrastructure.

Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

Energy Technology Data Exchange (ETDEWEB)

Zipperer, A. [Colorado State Univ., Fort Collins, CO (United States); Aloise-Young, P. A. [Colorado State Univ., Fort Collins, CO (United States); Suryanarayanan, S. [Colorado State Univ., Fort Collins, CO (United States); Zimmerle, D. [Colorado State Univ., Fort Collins, CO (United States); Roche, R. [Univ. of Technology, Belfort-Montebeliard (France); Earle, L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bauleo, P. [Fort Collins Utilities, CO (United States)

2013-08-01

Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and trans-forming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electricity grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

Electric Energy Management in the Smart Home: Perspectives on Enabling Technologies and Consumer Behavior

Energy Technology Data Exchange (ETDEWEB)

Zipperer, Adam; Aloise-Young, Patricia A.; Suryanarayanan, Siddharth; Roche, Robin; Earle, Lieko; Christensen, Dane; Bauleo, Pablo; Zimmerle, Daniel

2013-11-01

Smart homes hold the potential for increasing energy efficiency, decreasing costs of energy use, decreasing the carbon footprint by including renewable resources, and transforming the role of the occupant. At the crux of the smart home is an efficient electric energy management system that is enabled by emerging technologies in the electric grid and consumer electronics. This article presents a discussion of the state-of-the-art in electricity management in smart homes, the various enabling technologies that will accelerate this concept, and topics around consumer behavior with respect to energy usage.

The Technology-Enabled Patient Advocate: A Valuable Emerging Healthcare Partner.

Science.gov (United States)

Kent, Susan M; Yellowlees, Peter

2015-12-01

The U.S. healthcare system is changing and is becoming more patient-centered and technology-supported, with greater emphasis on population health outcomes and team-based care. The roles of healthcare providers are changing, and new healthcare roles are developing such as that of the patient advocate. This article reviews the history of this type of role, the changes that have taken place over time, the technological innovations in service delivery that further enable the role, and how the role could increasingly be developed in the future. Logical future extensions of the current typical patient advocate are the appearance of a virtual or avatar-driven care navigator, using telemedicine and related information technologies, as healthcare provision moves increasingly in a hybrid direction, with care being given both in-person and online.

Feasibility assessment of optical technologies for reliable high capacity feeder links

Science.gov (United States)

Witternigg, Norbert; Schönhuber, Michael; Leitgeb, Erich; Plank, Thomas

2013-08-01

Space telecom scenarios like data relay satellite and broadband/broadcast service providers require reliable feeder links with high bandwidth/data rate for the communication between ground station and satellite. Free space optical communication (FSOC) is an attractive alternative to microwave links, improving performance by offering abundant bandwidth at small apertures of the optical terminals. At the same time Near-Earth communication by FSOC avoids interference with other services and is free of regulatory issues. The drawback however is the impairment by the laser propagation through the atmosphere at optical wavelengths. Also to be considered are questions of eye safety for ground personnel and aviation. In this paper we assess the user requirements for typical space telecom scenarios and compare these requirements with solutions using optical data links through the atmosphere. We suggest a site diversity scheme with a number of ground stations and a switching scheme using two optical terminals on-board the satellite. Considering the technology trade-offs between four different optical wavelengths we recommend the future use of 1.5 μm laser technology and calculate a link budget for an atmospheric condition of light haze on the optical path. By comparing link budgets we show an outlook to the future potential use of 10 μm laser technology.

Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

DEFF Research Database (Denmark)

Amin, Zubair; Boulet, John R; Cook, David A

2011-01-01

The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... and needs, the need for better evidence to support use of technologies in health profession education assessment, and a number of challenges, particularly validity threats, that need to be addressed while incorporating technology in assessment. Our recommendations are intended for all practitioners across...

Extending green technology innovations to enable greener fabs

Science.gov (United States)

Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

2015-03-01

Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

Enabling frameworks for low-carbon technology transfer to small emerging economies: Analysis of ten case studies in Chile

International Nuclear Information System (INIS)

Pueyo, Ana

2013-01-01

Technology transfer is crucial to reduce the carbon intensity of developing countries. Enabling frameworks need to be in place to allow foreign technologies to flow, to be absorbed and to bring about technological change in the recipient country. This paper contributes to identifying these enabling factors by analysing 10 case studies of low-carbon technology transfer processes based in Chile. Our findings show the importance of strong economic and institutional fundamentals, a sound knowledge base, a sizable and stable demand and a functioning local industry. Policy recommendations are derived to improve the penetration of foreign low-carbon technologies in developing countries, focusing on the particularities of small and medium emerging economies. - Highlights: ► We analyse 10 case studies of low carbon technology transfer to Chile. ► We identify enablers of technology transfer to developing countries. ► We provide policy recommendations focusing on small and medium economies.

Advanced excimer laser technologies enable green semiconductor manufacturing

Science.gov (United States)

Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

2014-03-01

"Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

Stratified Charge Rotary Engine Critical Technology Enablement, Volume 1

Science.gov (United States)

Irion, C. E.; Mount, R. E.

1992-01-01

This report summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation, and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems.

Cognitive Heterogeneous Reconfigurable Optical Networks (CHRON): Enabling Technologies and Techniques

DEFF Research Database (Denmark)

Tafur Monroy, Idelfonso; Zibar, Darko; Guerrero Gonzalez, Neil

2011-01-01

We present the approach of cognition applied to heterogeneous optical networks developed in the framework of the EU project CHRON: Cognitive Heterogeneous Reconfigurable Optical Network. We introduce and discuss in particular the technologies and techniques that will enable a cognitive optical...... network to observe, act, learn and optimizes its performance, taking into account its high degree of heterogeneity with respect to quality of service, transmission and switching techniques....

Enabling technologies built on a sonochemical platform: challenges and opportunities.

Science.gov (United States)

Cintas, Pedro; Tagliapietra, Silvia; Caporaso, Marina; Tabasso, Silvia; Cravotto, Giancarlo

2015-07-01

Scientific and technological progress now occurs at the interface between two or more scientific and technical disciplines while chemistry is intertwined with almost all scientific domains. Complementary and synergistic effects have been found in the overlay between sonochemistry and other enabling technologies such as mechanochemistry, microwave chemistry and flow-chemistry. Although their nature and effects are intrinsically different, these techniques share the ability to significantly activate most chemical processes and peculiar phenomena. These studies offer a comprehensive overview of sonochemistry, provide a better understanding of correlated phenomena (mechanochemical effects, hot spots, etc.), and pave the way for emerging applications which unite hybrid reactors. Copyright © 2014 Elsevier B.V. All rights reserved.

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in COAL IGCC Powerplants

Energy Technology Data Exchange (ETDEWEB)

Kenneth A. Yackly

2004-09-30

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, has been re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for Coal IGCC powerplants. The new program has been re-titled as ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants'' to better match the new scope. This technical progress report summarizes the work accomplished in the reporting period April 1, 2004 to August 31, 2004 on the revised Re-Directed and De-Scoped program activity. The program Tasks are: Task 1--IGCC Environmental Impact on high Temperature Materials: This first materials task has been refocused to address Coal IGCC environmental impacts on high temperature materials use in gas turbines and remains in the program. This task will screen material performance and quantify the effects of high temperature erosion and corrosion of hot gas path materials in Coal IGCC applications. The materials of interest will include those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: This second task develops and demonstrates new sensor technologies to determine the in-service health of advanced technology Coal IGCC powerplants, and remains in the program with a reduced scope. Its focus is now on only two critical sensor need areas for advanced Coal IGCC gas turbines: (1) Fuel Quality Sensor for detection of fuel impurities that could lead to rapid component degradation, and a Fuel Heating Value Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware.

A Systematic Review of Reviews Evaluating Technology-Enabled Diabetes Self-Management Education and Support.

Science.gov (United States)

Greenwood, Deborah A; Gee, Perry M; Fatkin, Kathy J; Peeples, Malinda

2017-09-01

Since the introduction of mobile phones, technology has been increasingly used to enable diabetes self-management education and support. This timely systematic review summarizes how currently available technology impacts outcomes for people living with diabetes. A systematic review of high quality review articles and meta analyses focused on utilizing technology in diabetes self-management education and support services was conducted. Articles were included if published between January 2013 and January 2017. Twenty-five studies were included for analysis. The majority evaluated the use of mobile phones and secure messaging. Most studies described healthy eating, being active and metabolic monitoring as the predominant self-care behaviors evaluated. Eighteen of 25 reviews reported significant reduction in A1c as an outcome measure. Four key elements emerged as essential for improved A1c: (1) communication, (2) patient-generated health data, (3) education, and (4) feedback. Technology-enabled diabetes self-management solutions significantly improve A1c. The most effective interventions incorporated all the components of a technology-enabled self-management feedback loop that connected people with diabetes and their health care team using 2-way communication, analyzed patient-generated health data, tailored education, and individualized feedback. The evidence from this systematic review indicates that organizations, policy makers and payers should consider integrating these solutions in the design of diabetes self-management education and support services for population health and value-based care models. With the widespread adoption of mobile phones, digital health solutions that incorporate evidence-based, behaviorally designed interventions can improve the reach and access to diabetes self-management education and ongoing support.

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants

Energy Technology Data Exchange (ETDEWEB)

Kenneth A. Yackly

2005-12-01

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas

New dynamic silicon photonic components enabled by MEMS technology

Science.gov (United States)

Errando-Herranz, Carlos; Edinger, Pierre; Colangelo, Marco; Björk, Joel; Ahmed, Samy; Stemme, Göran; Niklaus, Frank; Gylfason, Kristinn B.

2018-02-01

Silicon photonics is the study and application of integrated optical systems which use silicon as an optical medium, usually by confining light in optical waveguides etched into the surface of silicon-on-insulator (SOI) wafers. The term microelectromechanical systems (MEMS) refers to the technology of mechanics on the microscale actuated by electrostatic actuators. Due to the low power requirements of electrostatic actuation, MEMS components are very power efficient, making them well suited for dense integration and mobile operation. MEMS components are conventionally also implemented in silicon, and MEMS sensors such as accelerometers, gyros, and microphones are now standard in every smartphone. By combining these two successful technologies, new active photonic components with extremely low power consumption can be made. We discuss our recent experimental work on tunable filters, tunable fiber-to-chip couplers, and dynamic waveguide dispersion tuning, enabled by the marriage of silicon MEMS and silicon photonics.

Enabling Technologies for Smart Grid Integration and Interoperability of Electric Vehicles

DEFF Research Database (Denmark)

Martinenas, Sergejus

Conventional, centralized power plants are being replaced by intermittent, distributed renewable energy sources, thus raising the concern about the stability of the power grid in its current state. All the while, electrification of all forms of transportation is increasing the load...... for successful EV integration into the smart grid, as a smart, mobile distributed energy resource. The work is split into three key topics: enabling technologies, grid service applications and interoperability issues. The current state of e-mobility technologies is surveyed. Technologies and protocols...... EVs to not only mitigate their own effects on the grid, but also provide value to grid operators, locally as well as system wide. Finally, it is shown that active integration of EVs into the smart grid, is not only achievable, but is well on its way to becoming a reality....

Novel enabling technologies of gene isolation and plant transformation for improved crop protection

Energy Technology Data Exchange (ETDEWEB)

Torok, Tamas

2013-02-04

Meeting the needs of agricultural producers requires the continued development of improved transgenic crop protection products. The completed project focused on developing novel enabling technologies of gene discovery and plant transformation to facilitate the generation of such products.

Technology-enabled management of communication and swallowing disorders in Parkinson's disease: a systematic scoping review.

Science.gov (United States)

Theodoros, Deborah; Aldridge, Danielle; Hill, Anne J; Russell, Trevor

2018-06-19

Communication and swallowing disorders are highly prevalent in people with Parkinson's disease (PD). Maintenance of functional communication and swallowing over time is challenging for the person with PD and their families and may lead to social isolation and reduced quality of life if not addressed. Speech and language therapists (SLTs) face the conundrum of providing sustainable and flexible services to meet the changing needs of people with PD. Motor, cognitive and psychological issues associated with PD, medication regimens and dependency on others often impede attendance at a centre-based service. The access difficulties experienced by people with PD require a disruptive service approach to meet their needs. Technology-enabled management using information and telecommunications technologies to provide services at a distance has the potential to improve access, and enhance the quality of SLT services to people with PD. To report the status and scope of the evidence for the use of technology in the management of the communication and swallowing disorders associated with PD. Studies were retrieved from four major databases (PubMed, CINAHL, EMBASE and Medline via Web of Science). Data relating to the types of studies, level of evidence, context, nature of the management undertaken, participant perspectives and the types of technologies involved were extracted for the review. A total of 17 studies were included in the review, 15 of which related to the management of communication and swallowing disorders in PD with two studies devoted to participant perspectives. The majority of the studies reported on the treatment of the speech disorder in PD using Lee Silverman Voice Treatment (LSVT LOUD ® ). Synchronous and asynchronous technologies were used in the studies with a predominance of the former. There was a paucity of research in the management of cognitive-communication and swallowing disorders. Research evidence supporting technology-enabled management of the

Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

Science.gov (United States)

Cunningham, James; Ainsworth, John

2017-01-01

The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

BARRIERS AND MOTIVATORS IN ENGAGING WITH TECHNOLOGY-ENABLED CARDIAC REHABILITATION: A PATIENT AND HEALTH PROFESSIONAL PERSPECTIVE.

Directory of Open Access Journals (Sweden)

Deirdre Walsh

2015-10-01

This formative work has outlined key patient and stakeholder concerns regarding engagement with a technology enabled behavior change intervention in CR. Factors that inhibit and promote engagement have been explored using the COM-B framework. Motivational factors related to social interaction were deemed one of the integral aspects for engagement and adherence to PATHway. In terms of capability factors, technology ease- of-use was highlighted among patient and stakeholders as important for uptake and continued use. This project has received funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation Action under Grant Agreement no. 643491. PATHway: Technology enabled behavioural change as a pathway towards better self-management of CVD (www.pathway2health.eu

IM/DD vs. 4-PAM Using a 1550-nm VCSEL over Short-Range SMF/MMF Links for Optical Interconnects

DEFF Research Database (Denmark)

Karinou, Fotini; Rodes Lopez, Roberto; Prince, Kamau

2013-01-01

We experimentally compare the performance of 10.9-Gb/s IM/DD and 5-GBd 4-PAM modulation formats over 5-km SMF and 1-km MMF links, employing a commercially-available 1550-nm VCSEL as an enabling technology for use in optical interconnects.......We experimentally compare the performance of 10.9-Gb/s IM/DD and 5-GBd 4-PAM modulation formats over 5-km SMF and 1-km MMF links, employing a commercially-available 1550-nm VCSEL as an enabling technology for use in optical interconnects....

The role of electricity storage and hydrogen technologies in enabling global low-carbon energy transitions

OpenAIRE

McPherson, M.; Johnson, N.; Strubegger, M.

2018-01-01

Previous studies have noted the importance of electricity storage and hydrogen technologies for enabling large-scale variable renewable energy (VRE) deployment in long-term climate change mitigation scenarios. However, global studies, which typically use integrated assessment models, assume a fixed cost trajectory for storage and hydrogen technologies; thereby ignoring the sensitivity of VRE deployment and/or mitigation costs to uncertainties in future storage and hydrogen technology costs. Y...

Applications of Organic and Printed Electronics A Technology-Enabled Revolution

CERN Document Server

2013-01-01

Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain.  The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize organic and printed electronics will make possible applications that go far beyond the well-known displays made with large-area silicon electronics. Since organic electronics are still in their early stage, undergoing transition from lab-scale and prototype activities to production, this book serves as a valuable snapshot of the current landscape of the different devices enabled by this technology, reviewing all applications that are developing and those can be foreseen.   Provides a complete roadmap for organic and printed electronics research and development for the next several years; Includes an overview of the printing processes for organic electronics, along with state of the art applications, such as solar ...

The X-Factor of Cultivating Successful Entrepreneurial Technology-Enabled Start-Ups

Directory of Open Access Journals (Sweden)

Elsje Scott

2016-10-01

Full Text Available In the fast changing global economic landscape, the cultivation of sustainable entrepreneurial ventures is seen as a vital mechanism that will enable businesses to introduce new innovative products to the market faster and more effectively than their competitors. This research paper investigated phenomena that may play a significant role when entrepreneurs implement creative ideas resulting in successful technology enabled start-ups within the South African market place. Constant and significant changes in technology provide several challenges for entrepreneurship. Various themes such as innovation, work experience, idea generation, education and partnership formation have been explored to assess their impact on entrepreneurship. Reflection and a design thinking approach underpinned a rigorous analysis process to distill themes from the data gathered through semi structured interviews. From the findings it was evident that the primary success influencers include the formation of partnership, iterative cycles, and certain types of education. The secondary influencers included the origination of an idea, the use of innovation. and organizational culture as well as work experience. This research illustrates how Informing Science as a transdisicpline can provide a philosophical underpinning to communicate and synthesise ideas from constituent disciplines in an attempt to create a more cohesive whole. This diverse environment, comprising people, technology, and business, requires blending different elements from across diverse fields to yield better science. With this backdrop, this preliminary study provides an important foundation for further research in the context of a developing country where entrepreneurial ventures may have a socio-economical impact. The themes that emerged through this study could provide avenues for further research.

Enabling technologies and green processes in cyclodextrin chemistry

Directory of Open Access Journals (Sweden)

Giancarlo Cravotto

2016-02-01

Full Text Available The design of efficient synthetic green strategies for the selective modification of cyclodextrins (CDs is still a challenging task. Outstanding results have been achieved in recent years by means of so-called enabling technologies, such as microwaves, ultrasound and ball mills, that have become irreplaceable tools in the synthesis of CD derivatives. Several examples of sonochemical selective modification of native α-, β- and γ-CDs have been reported including heterogeneous phase Pd- and Cu-catalysed hydrogenations and couplings. Microwave irradiation has emerged as the technique of choice for the production of highly substituted CD derivatives, CD grafted materials and polymers. Mechanochemical methods have successfully furnished greener, solvent-free syntheses and efficient complexation, while flow microreactors may well improve the repeatability and optimization of critical synthetic protocols.

Enabling Campus Grids with Open Science Grid Technology

International Nuclear Information System (INIS)

Weitzel, Derek; Fraser, Dan; Pordes, Ruth; Bockelman, Brian; Swanson, David

2011-01-01

The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

Advanced light source technologies that enable high-volume manufacturing of DUV lithography extensions

Science.gov (United States)

Cacouris, Theodore; Rao, Rajasekhar; Rokitski, Rostislav; Jiang, Rui; Melchior, John; Burfeindt, Bernd; O'Brien, Kevin

2012-03-01

Deep UV (DUV) lithography is being applied to pattern increasingly finer geometries, leading to solutions like double- and multiple-patterning. Such process complexities lead to higher costs due to the increasing number of steps required to produce the desired results. One of the consequences is that the lithography equipment needs to provide higher operating efficiencies to minimize the cost increases, especially for producers of memory devices that experience a rapid decline in sales prices of these products over time. In addition to having introduced higher power 193nm light sources to enable higher throughput, we previously described technologies that also enable: higher tool availability via advanced discharge chamber gas management algorithms; improved process monitoring via enhanced on-board beam metrology; and increased depth of focus (DOF) via light source bandwidth modulation. In this paper we will report on the field performance of these technologies with data that supports the desired improvements in on-wafer performance and operational efficiencies.

New Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled by Magneto-Electric Ternary CAM

Science.gov (United States)

2017-12-11

AFRL-RY-WP-TR-2017-0198 NEW CONTENT ADDRESSABLE MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC...MEMORY (CAM) TECHNOLOGIES FOR BIG DATA AND INTELLIGENT ELECTRONICS ENABLED BY MAGNETO-ELECTRIC TERNARY CAM 5a. CONTRACT NUMBER FA8650-16-1-7655 5b... electronic applications, such as internet of things, big data, wireless sensors, and mobile devices, have begun to focus on the importance of energy

Exploring students’ uses of and dispositions towards learning technologies in an Australian enabling course

Directory of Open Access Journals (Sweden)

Rhian Morgan

2018-02-01

Full Text Available University progression is increasingly dependent upon students developing a range of digital literacies in conjunction with the skills associated with their disciplines. University enabling and pathway programs, in particular, have a key part to play in supporting students to interact with technologies for learning. Widening participation and increased student diversity result in highly variable levels of digital literacy in the classroom. As such, universities need to develop strategies to effectively respond to the differing abilities of students entering the sector. This paper contributes to the development of such responses through a case study exploring students’ use of and dispositions towards technologies in an open access enabling course. In this context ‘open access’ refers to the course admission requirements and the fact that the course enrollments are open to anyone over the age of eighteen, regardless of their prior schooling experience. The paper identifies trends in students’ uses of technology, such as preferences for mobile content and blended learning environments, before concluding with a discussion of how these findings can be mobilised in curriculum development.

Alliance group formation: enabling and constraining effects of embeddedness and social capital in strategic technology alliance networks

NARCIS (Netherlands)

Duysters, G.M.; Lemmens, C.E.A.V.

2003-01-01

The role of embeddedness and social capital in the process of alliance group formation in strategic technology alliance networks is examined. In particular, the social mechanisms that enable and enforce alliance group formation is studies. It is argued that the enabling effect of embeddedness during

Enabling campus grids with open science grid technology

Energy Technology Data Exchange (ETDEWEB)

Weitzel, Derek [Nebraska U.; Bockelman, Brian [Nebraska U.; Swanson, David [Nebraska U.; Fraser, Dan [Argonne; Pordes, Ruth [Fermilab

2011-01-01

The Open Science Grid is a recognized key component of the US national cyber-infrastructure enabling scientific discovery through advanced high throughput computing. The principles and techniques that underlie the Open Science Grid can also be applied to Campus Grids since many of the requirements are the same, even if the implementation technologies differ. We find five requirements for a campus grid: trust relationships, job submission, resource independence, accounting, and data management. The Holland Computing Center's campus grid at the University of Nebraska-Lincoln was designed to fulfill the requirements of a campus grid. A bridging daemon was designed to bring non-Condor clusters into a grid managed by Condor. Condor features which make it possible to bridge Condor sites into a multi-campus grid have been exploited at the Holland Computing Center as well.

Solution processed organic light-emitting diodes using the plasma cross-linking technology

Energy Technology Data Exchange (ETDEWEB)

He, Kongduo [Department of Light Sources and Illuminating Engineering, Fudan University, Shanghai 200433 (China); Liu, Yang [Department of Light Sources and Illuminating Engineering, Fudan University, Shanghai 200433 (China); Engineering Research Center of Advanced Lighting Technology, Ministry of Education, Shanghai 200433 (China); Gong, Junyi; Zeng, Pan; Kong, Xun; Yang, Xilu; Yang, Cheng; Yu, Yan [Department of Light Sources and Illuminating Engineering, Fudan University, Shanghai 200433 (China); Liang, Rongqing [Department of Light Sources and Illuminating Engineering, Fudan University, Shanghai 200433 (China); Engineering Research Center of Advanced Lighting Technology, Ministry of Education, Shanghai 200433 (China); Ou, Qiongrong, E-mail: qrou@fudan.edu.cn [Department of Light Sources and Illuminating Engineering, Fudan University, Shanghai 200433 (China); Engineering Research Center of Advanced Lighting Technology, Ministry of Education, Shanghai 200433 (China)

2016-09-30

Highlights: • Mixed acetylene and Ar plasma treatment makes the organic film surface cross-linked. • The plasma treatment for 30 s does not affect the performance of OLEDs. • Cross-linking surface can resist rinsing and corrosion of organic solvent. • The surface morphology is nearly unchanged after plasma treatment. • The plasma cross-linking method can realize solution processed multilayer OLEDs. - Abstract: Solution processed multilayer organic light-emitting diodes (OLEDs) present challenges, especially regarding dissolution of the first layer during deposition of a second layer. In this work, we first demonstrated a plasma cross-linking technology to produce a solution processed OLED. The surfaces of organic films can be cross-linked after mixed acetylene and Ar plasma treatment for several tens of seconds and resist corrosion of organic solvent. The film thickness and surface morphology of emissive layers (EMLs) with plasma treatment and subsequently spin-rinsed with chlorobenzene are nearly unchanged. The solution processed triple-layer OLED is successfully fabricated and the current efficiency increases 50% than that of the double-layer OLED. Fluorescent characteristics of EMLs are also observed to investigate factors influencing the efficiency of the triple-layer OLED. Plasma cross-linking technology may open up a new pathway towards fabrication of all-solution processed multilayer OLEDs and other soft electronic devices.

A Technology Enabled Journey

Science.gov (United States)

Devine, Pamela Albert

2012-01-01

This article features Point Road School, a pre-K-4 school in New Jersey that enhances student learning by integrating new and emerging technologies into the curriculum. Point Road School's technology story began in 1996 with a grant for a classroom modem so students could email their university literacy buddies. The New Jersey school has moved…

Integrating Technology into Instruction at a Public University in Kyrgyzstan: Barriers and Enablers

Science.gov (United States)

Muhametjanova, Gulshat; Cagiltay, Kursat

2016-01-01

The purpose of this study was to determine enablers and barriers to the technology integration into education based on the example of the situation at the Kyrgyz-Turkish Manas University as reported by students and instructors. The study employed the mixed-methods research design, combining data obtained from 477 student and 57 instructor…

Radiation-hard mid-power booster optical fiber amplifiers for high-speed digital and analogue satellite laser communication links

Science.gov (United States)

Stampoulidis, L.; Kehayas, E.; Stevens, G.; Henwood-Moroney, L.; Hosking, P.; Robertson, A.

2017-11-01

Optical laser communications (OLC) has been identified as the technology to enable high-data rate, secure links between and within satellites, as well as between satellites and ground stations with decreased mass, size, and electrical power compared to traditional RF technology.

Supporting Pre-Service Teachers' Technology-Enabled Learning Design Thinking through Whole of Programme Transformation

Science.gov (United States)

Bower, Matt; Highfield, Kate; Furney, Pam; Mowbray, Lee

2013-01-01

This paper explains a development and evaluation project aimed at transforming two pre-service teacher education programmes at Macquarie University to more effectively cultivate students' technology-enabled learning design thinking. The process of transformation was based upon an explicit and sustained focus on developing university academics'…

Consumer Connectivity in a Complex, Technology-enabled, and Mobile-oriented World with Smart Products

NARCIS (Netherlands)

Verhoef, Peter C.; Stephen, Andrew T.; Kannan, P. K.; Luo, Xueming; Abhishek, Vibhanshu; Andrews, Michelle; Bart, Yakov; Datta, Hannes; Fong, Nathan; Hoffman, Donna L.; Hu, Mandy Mantian; Novak, Tom; Rand, William; Zhang, Yuchi

2017-01-01

Today's consumers are immersed in a vast and complex array of networks. Each network features an interconnected mesh of people and firms, and now, with the rise of the Internet of Things (IoT), also objects. Technology (particularly mobile devices) enables such connections, and facilitates many

Consumer connectivity in a complex, technology-enabled, and mobile-oriented world with smart products

NARCIS (Netherlands)

Verhoef, Peter C.; Stephen, Andrew T.; Kannan, P.K.; Luo, Xueming; Abishek, Vibhanshu; Andrews, Michelle; Bart, Yakov; Datta, Hannes; Fong, Nathan M.; Hoffman, Donna L.; Hu, Mandy; Novak, Thomas P.; Rand, William; Zhang, Yuchi

2017-01-01

Today’s consumers are immersed in a vast and complex array of networks. Each network features an interconnected mesh of people and firms, and now, with the rise of the Internet of Things (IoT), also objects. Technology (particularly mobile devices) enables such connections, and facilitates many

DOE's SciDAC Visualization and Analytics Center for EnablingTechnologies -- Strategy for Petascale Visual Data Analysis Success

Energy Technology Data Exchange (ETDEWEB)

Bethel, E Wes; Johnson, Chris; Aragon, Cecilia; Rubel, Oliver; Weber, Gunther; Pascucci, Valerio; Childs, Hank; Bremer, Peer-Timo; Whitlock, Brad; Ahern, Sean; Meredith, Jeremey; Ostrouchov, George; Joy, Ken; Hamann, Bernd; Garth, Christoph; Cole, Martin; Hansen, Charles; Parker, Steven; Sanderson, Allen; Silva, Claudio; Tricoche, Xavier

2007-10-01

The focus of this article is on how one group of researchersthe DOE SciDAC Visualization and Analytics Center for EnablingTechnologies (VACET) is tackling the daunting task of enabling knowledgediscovery through visualization and analytics on some of the world slargest and most complex datasets and on some of the world's largestcomputational platforms. As a Center for Enabling Technology, VACET smission is the creation of usable, production-quality visualization andknowledge discovery software infrastructure that runs on large, parallelcomputer systems at DOE's Open Computing facilities and that providessolutions to challenging visual data exploration and knowledge discoveryneeds of modern science, particularly the DOE sciencecommunity.

Ultrafast disk technology enables next generation micromachining laser sources

Science.gov (United States)

Heckl, Oliver H.; Weiler, Sascha; Luzius, Severin; Zawischa, Ivo; Sutter, Dirk

2013-02-01

Ultrashort pulsed lasers based on thin disk technology have entered the 100 W regime and deliver several tens of MW peak power without chirped pulse amplification. Highest uptime and insensitivity to back reflections make them ideal tools for efficient and cost effective industrial micromachining. Frequency converted versions allow the processing of a large variety of materials. On one hand, thin disk oscillators deliver more than 30 MW peak power directly out of the resonator in laboratory setups. These peak power levels are made possible by recent progress in the scaling of the pulse energy in excess of 40 μJ. At the corresponding high peak intensity, thin disk technology profits from the limited amount of material and hence the manageable nonlinearity within the resonator. Using new broadband host materials like for example the sesquioxides will eventually reduce the pulse duration during high power operation and further increase the peak power. On the other hand industry grade amplifier systems deliver even higher peak power levels. At closed-loop controlled 100W, the TruMicro Series 5000 currently offers the highest average ultrafast power in an industry proven product, and enables efficient micromachining of almost any material, in particular of glasses, ceramics or sapphire. Conventional laser cutting of these materials often requires UV laser sources with pulse durations of several nanoseconds and an average power in the 10 W range. Material processing based on high peak power laser sources makes use of multi-photon absorption processes. This highly nonlinear absorption enables micromachining driven by the fundamental (1030 nm) or frequency doubled (515 nm) wavelength of Yb:YAG. Operation in the IR or green spectral range reduces the complexity and running costs of industrial systems initially based on UV light sources. Where UV wavelength is required, the TruMicro 5360 with a specified UV crystal life-time of more than 10 thousand hours of continues

Enabling technologies for demand management: Transport

International Nuclear Information System (INIS)

Smith, Roderick A.

2008-01-01

Rising transport demand is likely to be the biggest hurdle to reducing our greenhouse gas emissions. Globally and nationally, transport is consuming an ever increasing share of our total energy use. Furthermore, the bulk of energy used in transport comes from the burning of petroleum products. This brief paper summarises options arising from the two routes to reduce energy demand in transport: improved and more efficient use of existing and possible new transport modes, and the reduction of transport demand. In both areas, the prospects in the immediate and longer-term future are hedged with difficulties. Automobiles and aircraft have improved considerably in recent decades, but future improvements are likely to be incremental. The introduction of hydrogen as a fuel is appealing, but there are technical problems to be solved. Active reduction of demand for transport will require a decoupling of the link between demand and growth in gross domestic product. Globally, this will be very difficult to achieve. Various modes of public transport exist that are efficient in terms of their energy use per passenger kilometre. But they need large investments to make them more attractive than the automobile. However, population concentration in mega-cities, allied with congestion, will make such innovation essential. Policy measures can be assisted in their implementation by new technology, but will remain politically problematic

Evaluating the limits of solar photovoltaics (PV) in electric power systems utilizing energy storage and other enabling technologies

International Nuclear Information System (INIS)

Denholm, Paul; Margolis, Robert M.

2007-01-01

In this work, we evaluate technologies that will enable solar photovoltaics (PV) to overcome the limits of traditional electric power systems. We performed simulations of a large utility system using hourly solar insolation and load data and attempted to provide up to 50% of this system's energy from PV. We considered several methods to avoid the limits of unusable PV that result at high penetration due to the use of inflexible baseload generators. The enabling technologies considered in this work are increased system flexibility, load shifting via demand responsive appliances, and energy storage

The role of utilities in enabling technology innovation: The BC hydro alternative & emerging energy strategy

Energy Technology Data Exchange (ETDEWEB)

Tu, Alex; Leclair, Donna; Morrison, Allison

2010-09-15

In order for renewable energy to play a dominant role in the global electricity supply mix, emerging renewable energy technologies - such as wave, tidal, enhanced geothermal, and 3rd generation photovoltaic technologies - must prove their technical merits and achieve cost parity with conventional sources of supply. BC Hydro, a government-owned electric utility, launched an Alternative and Emerging Energy Strategy that describes its role as an enabler of technology innovation. This paper describes BC Hydro's goal, objectives and actions to accelerate the commercialization that will yield a diversity of supply options and a growing, local clean-tech cluster.

Underlay of low-rate machine-type D2D links on downlink cellular links

DEFF Research Database (Denmark)

Pratas, Nuno K.; Popovski, Petar

2014-01-01

Wireless cellular networks feature two emerging technological trends: direct Device-to-Device (D2D) communications and Machine-Type Communications (MTC). MTC devices (MTDs) pose new challenges to the cellular network, such as low transmission power and massive access that can lead to overload...... probability for the MTC link. The results show that SIC is an important enabler of low-power underlay D2D transmission for low-rate machine-type traffic; however, it may incur a significant rate penalty for the cellular users when trying to meet the outage requirements of the MTC link....... of the radio interface. In this paper we explore the opportunity opened by D2D links for supporting Low-rate Low-power MTDs that are connected to a nearby device, such as an on-body MTD connected to a mobile phone that acts as a relay towards the Base Station (BS). The low-rate requirement for this D2D...

INFORMATION TECHNOLOGY AND ROMANIAN HIGHER EDUCATION - EVIDENCE ON LINKED DYNAMIC

Directory of Open Access Journals (Sweden)

Bogdan Nichifor

2014-07-01

Full Text Available The link between education, in general, and information technologies is one that does not necessarily have to be demonstrated. But it is interesting to see the specific link that is established between these two components of modern society. In recent years, part-time education forms tend to occupy an increasingly important position in the Romanian higher education from the perspective of the total number of students opting for distance learning or traditional part-time learning. This development occurred amid expansion of information technology - more and more households have Internet access and frequency of its use is increasing from year to year – in the context in which forms of part – time learning require the use of this means of information and communication. On this background more and more people over 25 years become interested in further developing their studies, including employed persons opting for further studies, increasing the share of students over 25 years in total students and the share of employed population over 25 years with higher education in total in respective age group.

Visible quality aluminum and nickel superpolish polishing technology enabling new missions

Science.gov (United States)

Carrigan, Keith G.

2011-06-01

It is now well understood that with US Department of Defense (DoD) budgets shrinking and the Services and Agencies demanding new systems which can be fielded more quickly, cost and schedule are being emphasized more and more. At the same time, the US has ever growing needs for advanced capabilities to support evolving Intelligence, Surveillance and Reconnaissance objectives. In response to this market demand for ever more cost-effective, faster to market, single-channel, athermal optical systems, we have developed new metal polishing technologies which allow for short-lead, low-cost metal substrates to replace more costly, longer-lead material options. In parallel, the commercial marketplace is being driven continually to release better, faster and cheaper electronics. Growth according to Moore's law, enabled by advancements in photolithography, has produced denser memory, higher resolution displays and faster processors. While the quality of these products continues to increase, their price is falling. This seeming paradox is driven by industry advancements in manufacturing technology. The next steps on this curve can be realized via polishing technology which allows low-cost metal substrates to replace costly Silicon based optics for use in ultra-short wavelength systems.

Cognitive Spectrum Sharing: An Enabling Wireless Communication Technology for a Wide Use of Smart Systems

Directory of Open Access Journals (Sweden)

Romano Fantacci

2016-05-01

Full Text Available A smart city is an environment where a pervasive, multi-service network is employed to provide citizens improved living conditions as well as better public safety and security. Advanced communication technologies are essential to achieve this goal. In particular, an efficient and reliable communication network plays a crucial role in providing continue, ubiquitous, and reliable interconnections among users, smart devices, and applications. As a consequence, wireless networking appears as the principal enabling communication technology despite the necessity to face severe challenges to satisfy the needs arising from a smart environment, such as explosive data volume, heterogeneous data traffic, and support of quality of service constraints. An interesting approach for meeting the growing data demand due to smart city applications is to adopt suitable methodologies to improve the usage of all potential spectrum resources. Towards this goal, a very promising solution is represented by the Cognitive Radio technology that enables context-aware capability in order to pursue an efficient use of the available communication resources according to the surrounding environment conditions. In this paper we provide a review of the characteristics, challenges, and solutions of a smart city communication architecture, based on the Cognitive Radio technology, by focusing on two new network paradigms—namely, Heterogeneous Network and Machines-to-Machines communications—that are of special interest to efficiently support smart city applications and services.

Emission Control Research to Enable Fuel Efficiency: Department of Energy Heavy Vehicle Technologies

International Nuclear Information System (INIS)

Gurpreet Singh; Ronald L. Graves; John M. Storey; William P. Partridge; John F. Thomas; Bernie M. Penetrante; Raymond M. Brusasco; Bernard T. Merritt; George E. Vogtlin; Christopher L. Aardahl; Craig F. Habeger; M.L. Balmer

2000-01-01

The Office of Heavy Vehicle Technologies supports research to enable high-efficiency diesel engines to meet future emissions regulations, thus clearing the way for their use in light trucks as well as continuing as the most efficient powerplant for freight-haulers. Compliance with Tier 2 rules and expected heavy duty engine standards will require effective exhaust emission controls (after-treatment) for diesels in these applications. DOE laboratories are working with industry to improve emission control technologies in projects ranging from application of new diagnostics for elucidating key mechanisms, to development and tests of prototype devices. This paper provides an overview of these R and D efforts, with examples of key findings and developments

Cohesive subgroup formation : enabling and constraining effects of social capital in strategic technology alliance networks

NARCIS (Netherlands)

Duysters, G.M.; Lemmens, C.E.A.V.

2002-01-01

In this paper we will examine the role of embeddedness and social capital in the process of cohesive subgroup formation in strategic technology alliance networks. More in particular, we will investigate the social mechanisms that enable and enforce cohesive subgroup formation. We will argue that the

Stratified charge rotary engine critical technology enablement. Volume 2: Appendixes

Science.gov (United States)

Irion, C. E.; Mount, R. E.

1992-01-01

This second volume of appendixes is a companion to Volume 1 of this report which summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation; and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems. A family of four-stage third-order explicit Runge-Kutta schemes is derived that required only two locations and has desirable stability characteristics. Error control is achieved by embedding a second-order scheme within the four-stage procedure. Certain schemes are identified that are as efficient and accurate as conventional embedded schemes of comparable order and require fewer storage locations.

Mapping industrial systems - a supply network perspective on enabling technologies, processes and actors

OpenAIRE

Srai, Jagjit Singh

2016-01-01

This is the author accepted manuscript. The final version is available from InderScience Publishers via http://dx.doi.org/10.1504/IJMTM.2017.10002927 This paper develops a multi-layered multi-stage mapping approach to explore the characteristics of emerging industry supply networks (EI SNs), and how enabling production technologies and supply chain processes are supported by institutional, industrial and supply network actors. The mapping methodology involves the systematic capture of mate...

PEAC: A Power-Efficient Adaptive Computing Technology for Enabling Swarm of Small Spacecraft and Deployable Mini-Payloads

Data.gov (United States)

National Aeronautics and Space Administration — This task is to develop and demonstrate a path-to-flight and power-adaptive avionics technology PEAC (Power Efficient Adaptive Computing). PEAC will enable emerging...

China, the United States, and competition for resources that enable emerging technologies

Science.gov (United States)

Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

2018-01-01

Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

ECO TECH LINK: PT3 Grant Builds Technology Circles in the K-18 Community.

Science.gov (United States)

Klinger, Katie; Duckett, Jane; Medrano, Maria; Crow, Nedra; Stowers, Gwen

Through the vehicle of the PT3 grant program, ECO TECH LINK has built a strong consortium to support technology circles of government, education and business in order to raise student achievement scores, shorten the time it takes to earn a teaching credential, and enhance the quality of teacher credential courses. The ECO TECH LINK grant enables…

Evaluation of emerging parallel optical link technology for high energy physics

International Nuclear Information System (INIS)

Chramowicz, J; Kwan, S; Prosser, A; Winchell, M

2012-01-01

Modern particle detectors utilize optical fiber links to deliver event data to upstream trigger and data processing systems. Future detector systems can benefit from the development of dense arrangements of high speed optical links emerging from industry advancements in transceiver technology. Supporting data transfers of up to 120 Gbps in each direction, optical engines permit assembly of the optical transceivers in close proximity to ASICs and FPGAs. Test results of some of these parallel components will be presented including the development of pluggable FPGA Mezzanine Cards equipped with optical engines to provide to collaborators on the Versatile Link Common Project for the HI-LHC at CERN. This work was supported by the U.S. Department of Energy, operated by Fermi Research Alliance, LLC under contract No. DE-AC02-07CH11359 with the United States Department of Energy.

Semantic technologies and linked data for the Italian PA: the case of data.cnr.it

Directory of Open Access Journals (Sweden)

Aldo Gangemi

2013-01-01

Full Text Available Governmental data are being published in many countries, providing an unprecedented opportunity to create innovative services and to increase societal awareness about administration dynamics. In particular, semantic technologies for linked data production and exploitation prove to be ideal for managing identity and interoperability of administrative entities and data. This paper presents the current state of art, and evolution scenarios of these technologies, with reference to several case studies, including two of them from the Italian context: CNR's Semantic Scout, and DigitPA's Linked Open IPA.

A VGI data integration framework based on linked data model

Science.gov (United States)

Wan, Lin; Ren, Rongrong

2015-12-01

This paper aims at the geographic data integration and sharing method for multiple online VGI data sets. We propose a semantic-enabled framework for online VGI sources cooperative application environment to solve a target class of geospatial problems. Based on linked data technologies - which is one of core components of semantic web, we can construct the relationship link among geographic features distributed in diverse VGI platform by using linked data modeling methods, then deploy these semantic-enabled entities on the web, and eventually form an interconnected geographic data network to support geospatial information cooperative application across multiple VGI data sources. The mapping and transformation from VGI sources to RDF linked data model is presented to guarantee the unique data represent model among different online social geographic data sources. We propose a mixed strategy which combined spatial distance similarity and feature name attribute similarity as the measure standard to compare and match different geographic features in various VGI data sets. And our work focuses on how to apply Markov logic networks to achieve interlinks of the same linked data in different VGI-based linked data sets. In our method, the automatic generating method of co-reference object identification model according to geographic linked data is discussed in more detail. It finally built a huge geographic linked data network across loosely-coupled VGI web sites. The results of the experiment built on our framework and the evaluation of our method shows the framework is reasonable and practicable.

The linked medical data access control framework.

Science.gov (United States)

Kamateri, Eleni; Kalampokis, Evangelos; Tambouris, Efthimios; Tarabanis, Konstantinos

2014-08-01

The integration of medical data coming from multiple sources is important in clinical research. Amongst others, it enables the discovery of appropriate subjects in patient-oriented research and the identification of innovative results in epidemiological studies. At the same time, the integration of medical data faces significant ethical and legal challenges that impose access constraints. Some of these issues can be addressed by making available aggregated instead of raw record-level data. In many cases however, there is still a need for controlling access even to the resulting aggregated data, e.g., due to data provider's policies. In this paper we present the Linked Medical Data Access Control (LiMDAC) framework that capitalizes on Linked Data technologies to enable controlling access to medical data across distributed sources with diverse access constraints. The LiMDAC framework consists of three Linked Data models, namely the LiMDAC metadata model, the LiMDAC user profile model, and the LiMDAC access policy model. It also includes an architecture that exploits these models. Based on the framework, a proof-of-concept platform is developed and its performance and functionality are evaluated by employing two usage scenarios. Copyright © 2014 Elsevier Inc. All rights reserved.

Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC

CERN Document Server

Barth, C; Bloch, I.; Bögelspacher, F.; de Boer, W.; Daniels, M.; Dierlamm, A.; Eber, R.; Eckerlin, G.; Eckstein, D.; Eichhorn, T.; Erfle, J.; Feld, L.; Garutti, E.; Gregor, I. -M.; Guthoff, M.; Hartmann, F.; Hauser, M.; Husemann, U.; Jakobs, K.; Junkes, A.; Karpinski, W.; Klein, K.; Kuehn, S.; Lacker, H.; Mahboubi, K.; Müller, Th.; Mussgiller, A.; Nürnberg, A.; Parzefall, U.; Poehlsen, T.; Poley, L.; Preuten, M.; Rehnisch, L.; Sammet, J.; Schleper, P.; Schuwalow, S.; Sperlich, D.; Stanitzki, M.; Steinbrück, G.; Wlochal, M.

2016-01-01

While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative "Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was supported by the Helmholtz Alliance "Phys...

Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

DEFF Research Database (Denmark)

Amin, Zubair; Boulet, John R; Cook, David A

2011-01-01

health professional education. Recommendations include adhering to principles of good assessment, the need for developing coherent institutional policy, using technologies to broaden the competencies to be assessed, linking patient-outcome data to assessment of practitioner performance, and capitalizing...

Design and Implementation of Technology Enabled Affective Learning Using Fusion of Bio-Physical and Facial Expression

Science.gov (United States)

Ray, Arindam; Chakrabarti, Amlan

2016-01-01

Technology Enabled Learning is a cognitive, constructive, systematic, collaborative learning procedure, which transforms teaching-learning pedagogy where role of emotion is very often neglected. Emotion plays significant role in the cognitive process of human being, so the transformation is incomplete without capturing the learner's emotional…

Understanding access and use of technology among youth with first-episode psychosis to inform the development of technology-enabled therapeutic interventions.

Science.gov (United States)

Abdel-Baki, Amal; Lal, Shalini; D-Charron, Olivier; Stip, Emmanuel; Kara, Nadjia

2017-02-01

Computers, video games and technological devices are part of young people's everyday lives. However, their use in first-episode psychosis (FEP) treatment is rare. The purpose of this study was to better understand the access and use of technology among individuals with FEP, including gaming activities, to inform future development of technology-enabled therapeutic applications. Self-administered survey on use of technological tools in 71 FEP individuals. PCs/laptops were used by all participants; cellphones/smartphones by 92%, consoles by 83% (mainly male and younger participants). Women texted and used social networks more frequently; men played games (mainly action) more often. The younger individuals reported playing games frequently (32% daily) with less use of the Web and social networks (favourite: Facebook). These data will be useful for developing Web-based psychoeducation tools and cognitive remediation video games for youth with FEP. © 2015 Wiley Publishing Asia Pty Ltd.

Nuclear Energy Enabling Technologies (NEET) Reactor Materials: News for the Reactor Materials Crosscut, May 2016

Energy Technology Data Exchange (ETDEWEB)

Maloy, Stuart Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science in Radiation and Dynamics Extremes

2016-09-26

In this newsletter for Nuclear Energy Enabling Technologies (NEET) Reactor Materials, pages 1-3 cover highlights from the DOE-NE (Nuclear Energy) programs, pages 4-6 cover determining the stress-strain response of ion-irradiated metallic materials via spherical nanoindentation, and pages 7-8 cover theoretical approaches to understanding long-term materials behavior in light water reactors.

The CCSDS Next Generation Space Data Link Protocol (NGSLP)

Science.gov (United States)

Kazz, Greg J.; Greenberg, Edward

2014-01-01

The CCSDS space link protocols i.e., Telemetry (TM), Telecommand (TC), Advanced Orbiting Systems (AOS) were developed in the early growth period of the space program. They were designed to meet the needs of the early missions, be compatible with the available technology and focused on the specific link environments. Digital technology was in its infancy and spacecraft power and mass issues enforced severe constraints on flight implementations. Therefore the Telecommand protocol was designed around a simple Bose, Hocquenghem, Chaudhuri (BCH) code that provided little coding gain and limited error detection but was relatively simple to decode on board. The infusion of the concatenated Convolutional and Reed-Solomon codes5 for telemetry was a major milestone and transformed telemetry applications by providing them the ability to more efficiently utilize the telemetry link and its ability to deliver user data. The ability to significantly lower the error rates on the telemetry links enabled the use of packet telemetry and data compression. The infusion of the high performance codes for telemetry was enabled by the advent of digital processing, but it was limited to earth based systems supporting telemetry. The latest CCSDS space link protocol, Proximity-1 was developed in early 2000 to meet the needs of short-range, bi-directional, fixed or mobile radio links characterized by short time delays, moderate but not weak signals, and short independent sessions. Proximity-1 has been successfully deployed on both NASA and ESA missions at Mars and is planned to be utilized by all Mars missions in development. A new age has arisen, one that now provides the means to perform advanced digital processing in spacecraft systems enabling the use of improved transponders, digital correlators, and high performance forward error correcting codes for all communications links. Flight transponders utilizing digital technology have emerged and can efficiently provide the means to make the

Blending technological, cognitive and social enablers to develop an immersive virtual learning environment for construction engineering education

NARCIS (Netherlands)

Keenaghan, G.N.

2018-01-01

The conceptual framework of the proposed novel system was to provide a stimulating learning experience for dislocated digital learners, who are seen as individuals with different perceptions and expectations. In addition to functionally integrate technological, cognitive and social enablers, the

How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

Directory of Open Access Journals (Sweden)

Noël Crespi

2008-04-01

Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

How IMS Enables Converged Services for Cable and 3G Technologies: A Survey

Directory of Open Access Journals (Sweden)

Mani Mehdi

2008-01-01

Full Text Available The IP multimedia subsystem (IMS is a service control overlay standardized by the 3GPP. The IMS is based on session initiation protocol (SIP to establish, modify, and terminate the sessions. It provides a clean separation between services, signaling, and media with the potential to enable control and management of services over multiple transport technologies. In the scope of fixed-mobile convergence, this paper is dedicated to presenting a review of how cable networks can be integrated into IMS technology to achieve 3G-cable horizontal convergence. Cable networks, as one of the major fixed broadband access technologies with PacketCable architecture, are able to provide broadband internet access and VoIP in addition to cable TV. In this article, we review the evolution in PacketCable architecture to take up IMS. In this way, we consider the standardization and research activities to address this integration. We review some important challenges such as SIP protocol compatibility, defining unique user profile, required enhancement in authentication process, QoS and charging system.

Current status and future prospects for enabling chemistry technology in the drug discovery process.

Science.gov (United States)

Djuric, Stevan W; Hutchins, Charles W; Talaty, Nari N

2016-01-01

This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of "dangerous" reagents. Also featured are advances in the "computer-assisted drug design" area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities.

Carbon emissions linked to capital and technology transfer

International Nuclear Information System (INIS)

Smith, P.F.

1994-01-01

Reducing carbon dioxide emissions, and hence global warming, could be achieved by placing a carbon budget on buildings and light vehicles. In this scheme, a building or vehicle is allocated an annual carbon budget expressed as kg/carbon. The user of the building or vehicle is then taxed for every carbon unit used over its budget limit. The aim of this paper is to extend this carbon budget idea in order to set up a formula for achieving capital and technology transfer from industrialized countries to developing countries. In addition, the author proposes a mechanism for linking historic carbon emissions caused in the industrialized world with compensation strategies for the developing nations. (UK)

Semantic Web Technologies for the Adaptive Web

DEFF Research Database (Denmark)

Dolog, Peter; Nejdl, Wolfgang

2007-01-01

Ontologies and reasoning are the key terms brought into focus by the semantic web community. Formal representation of ontologies in a common data model on the web can be taken as a foundation for adaptive web technologies as well. This chapter describes how ontologies shared on the semantic web...... provide conceptualization for the links which are a main vehicle to access information on the web. The subject domain ontologies serve as constraints for generating only those links which are relevant for the domain a user is currently interested in. Furthermore, user model ontologies provide additional...... means for deciding which links to show, annotate, hide, generate, and reorder. The semantic web technologies provide means to formalize the domain ontologies and metadata created from them. The formalization enables reasoning for personalization decisions. This chapter describes which components...

Provenance Usage in the OceanLink Project

Science.gov (United States)

Narock, T.; Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Cheatham, M.; Fils, D.; Finin, T.; Hitzler, P.; Janowicz, K.; Jones, M.; Krisnadhi, A.; Lehnert, K. A.; Mickle, A.; Raymond, L. M.; Schildhauer, M.; Shepherd, A.; Wiebe, P. H.

2014-12-01

A wide spectrum of maturing methods and tools, collectively characterized as the Semantic Web, is helping to vastly improve thedissemination of scientific research. The OceanLink project, an NSF EarthCube Building Block, is utilizing semantic technologies tointegrate geoscience data repositories, library holdings, conference abstracts, and funded research awards. Provenance is a vital componentin meeting both the scientific and engineering requirements of OceanLink. Provenance plays a key role in justification and understanding when presenting users with results aggregated from multiple sources. In the engineering sense, provenance enables the identification of new data and the ability to determine which data sources to query. Additionally, OceanLink will leverage human and machine computation for crowdsourcing, text mining, and co-reference resolution. The results of these computations, and their associated provenance, will be folded back into the constituent systems to continually enhance precision and utility. We will touch on the various roles provenance is playing in OceanLink as well as present our use of the PROV Ontology and associated Ontology Design Patterns.

The future of drug discovery: enabling technologies for enhancing lead characterization and profiling therapeutic potential.

Science.gov (United States)

Janero, David R

2014-08-01

Technology often serves as a handmaiden and catalyst of invention. The discovery of safe, effective medications depends critically upon experimental approaches capable of providing high-impact information on the biological effects of drug candidates early in the discovery pipeline. This information can enable reliable lead identification, pharmacological compound differentiation and successful translation of research output into clinically useful therapeutics. The shallow preclinical profiling of candidate compounds promulgates a minimalistic understanding of their biological effects and undermines the level of value creation necessary for finding quality leads worth moving forward within the development pipeline with efficiency and prognostic reliability sufficient to help remediate the current pharma-industry productivity drought. Three specific technologies discussed herein, in addition to experimental areas intimately associated with contemporary drug discovery, appear to hold particular promise for strengthening the preclinical valuation of drug candidates by deepening lead characterization. These are: i) hydrogen-deuterium exchange mass spectrometry for characterizing structural and ligand-interaction dynamics of disease-relevant proteins; ii) activity-based chemoproteomics for profiling the functional diversity of mammalian proteomes; and iii) nuclease-mediated precision gene editing for developing more translatable cellular and in vivo models of human diseases. When applied in an informed manner congruent with the clinical understanding of disease processes, technologies such as these that span levels of biological organization can serve as valuable enablers of drug discovery and potentially contribute to reducing the current, unacceptably high rates of compound clinical failure.

Website Policies / Important Links | DOepatents

Science.gov (United States)

Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and first) Publication Date (oldest first) Close Clear All Find DOepatents Website Policies / Important Important Links Some links on this page may take you to non-federal websites. Their policies may differ from

Emerging issues and current trends in assistive technology use 2007-2010: practising, assisting and enabling learning for all.

Science.gov (United States)

Abbott, Chris; Brown, David; Evett, Lindsay; Standen, Penny

2014-11-01

Following an earlier review in 2007, a further review of the academic literature relating to the uses of assistive technology (AT) by children and young people was completed, covering the period 2007-2011. As in the earlier review, a tripartite taxonomy: technology uses to train or practise, technology uses to assist learning and technology uses to enable learning, was used in order to structure the findings. The key markers for research in this field and during these three years were user involvement, AT on mobile mainstream devices, the visibility of AT, technology for interaction and collaboration, new and developing interfaces and inclusive design principles. The paper concludes by locating these developments within the broader framework of the Digital Divide.

Current status and future prospects for enabling chemistry technology in the drug discovery process

Science.gov (United States)

Djuric, Stevan W.; Hutchins, Charles W.; Talaty, Nari N.

2016-01-01

This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities. PMID:27781094

A federated semantic metadata registry framework for enabling interoperability across clinical research and care domains.

Science.gov (United States)

Sinaci, A Anil; Laleci Erturkmen, Gokce B

2013-10-01

In order to enable secondary use of Electronic Health Records (EHRs) by bridging the interoperability gap between clinical care and research domains, in this paper, a unified methodology and the supporting framework is introduced which brings together the power of metadata registries (MDR) and semantic web technologies. We introduce a federated semantic metadata registry framework by extending the ISO/IEC 11179 standard, and enable integration of data element registries through Linked Open Data (LOD) principles where each Common Data Element (CDE) can be uniquely referenced, queried and processed to enable the syntactic and semantic interoperability. Each CDE and their components are maintained as LOD resources enabling semantic links with other CDEs, terminology systems and with implementation dependent content models; hence facilitating semantic search, much effective reuse and semantic interoperability across different application domains. There are several important efforts addressing the semantic interoperability in healthcare domain such as IHE DEX profile proposal, CDISC SHARE and CDISC2RDF. Our architecture complements these by providing a framework to interlink existing data element registries and repositories for multiplying their potential for semantic interoperability to a greater extent. Open source implementation of the federated semantic MDR framework presented in this paper is the core of the semantic interoperability layer of the SALUS project which enables the execution of the post marketing safety analysis studies on top of existing EHR systems. Copyright © 2013 Elsevier Inc. All rights reserved.

Enabling technologies for fiber optic sensing

Science.gov (United States)

Ibrahim, Selwan K.; Farnan, Martin; Karabacak, Devrez M.; Singer, Johannes M.

2016-04-01

In order for fiber optic sensors to compete with electrical sensors, several critical parameters need to be addressed such as performance, cost, size, reliability, etc. Relying on technologies developed in different industrial sectors helps to achieve this goal in a more efficient and cost effective way. FAZ Technology has developed a tunable laser based optical interrogator based on technologies developed in the telecommunication sector and optical transducer/sensors based on components sourced from the automotive market. Combining Fiber Bragg Grating (FBG) sensing technology with the above, high speed, high precision, reliable quasi distributed optical sensing systems for temperature, pressure, acoustics, acceleration, etc. has been developed. Careful design needs to be considered to filter out any sources of measurement drifts/errors due to different effects e.g. polarization and birefringence, coating imperfections, sensor packaging etc. Also to achieve high speed and high performance optical sensing systems, combining and synchronizing multiple optical interrogators similar to what has been used with computer/processors to deliver super computing power is an attractive solution. This path can be achieved by using photonic integrated circuit (PIC) technology which opens the doors to scaling up and delivering powerful optical sensing systems in an efficient and cost effective way.

Integration of public procurement data using linked data

Directory of Open Access Journals (Sweden)

Jindrich Mynarz

2014-10-01

Full Text Available Linked data is frequently casted as a technology for performing integration of distributed datasets on the Web. In this paper, we propose a generic workflow for data integration based on linked data and semantic web technologies. The workflow comes out of an analysis of the application of linked data to integration of public procurement data. It organizes common data integration tasks, including schema alignment, data translation, entity reconciliation, and data fusion, into a sequence of repeatable steps towards achieving a unified view of the combined datasets. We propose this workflow with the main goal of improving the usability of data and its value for data analyses. Specifically, we target the domain of public procurement and its characteristic challenges this application area poses to data integration. As the paper progresses through the individual steps of the integration workflow, it highlights the key concerns and proposes solutions based on linked data to address these concerns. The discussed data integration methods are illustrated and evaluated on a running example describing integration of public procurement data from the Czech Republic. Using a motivating example of an analytical query on public procurement data we demonstrate how data integration enables to reveal a likely case of clientelism between a contracting authority and its supplier, which is validated by previous coverage in the media.

Enabling Equal Access to Molecular Diagnostics: What Are the Implications for Policy and Health Technology Assessment?

Science.gov (United States)

Plun-Favreau, Juliette; Immonen-Charalambous, Kaisa; Steuten, Lotte; Strootker, Anja; Rouzier, Roman; Horgan, Denis; Lawler, Mark

2016-01-01

Molecular diagnostics can offer important benefits to patients and are a key enabler of the integration of personalised medicine into health care systems. However, despite their promise, few molecular diagnostics are embedded into clinical practice (especially in Europe) and access to these technologies remains unequal across countries and sometimes even within individual countries. If research translation and the regulatory environments have proven to be more challenging than expected, reimbursement and value assessment remain the main barriers to providing patients with equal access to molecular diagnostics. Unclear or non-existent reimbursement pathways, together with the lack of clear evidence requirements, have led to significant delays in the assessment of molecular diagnostics technologies in certain countries. Additionally, the lack of dedicated diagnostics budgets and the siloed nature of resource allocation within certain health care systems have significantly delayed diagnostics commissioning. This article will consider the perspectives of different stakeholders (patients, health care payers, health care professionals, and manufacturers) on the provision of a research-enabled, patient-focused molecular diagnostics platform that supports optimal patient care. Through the discussion of specific case studies, and building on the experience from countries that have successfully integrated molecular diagnostics into clinical practice, this article will discuss the necessary evolutions in policy and health technology assessment to ensure that patients can have equal access to appropriate molecular diagnostics. © 2016 S. Karger AG, Basel.

The Flipped Classroom, Disruptive Pedagogies, Enabling Technologies and Wicked Problems: Responding to "The Bomb in the Basement"

Science.gov (United States)

Hutchings, Maggie; Quinney, Anne

2015-01-01

The adoption of enabling technologies by universities provides unprecedented opportunities for flipping the classroom to achieve student-centred learning. While higher education policies focus on placing students at the heart of the education process, the propensity for student identities to shift from partners in learning to consumers of…

Self-management of hypertension using technology enabled interventions in primary care settings.

Science.gov (United States)

Chandak, Aastha; Joshi, Ashish

2015-01-01

Self-management of hypertension by controlling Blood Pressure (BP) through technology-based interventions can effectively reduce the burden of high BP, which affects one out of every three adults in the United States. The primary aim of this study is to explore the role of technology enabled interventions to improve or enhance self-management among individuals with hypertension. We conducted a systematic review of the literature published between July 2008 and June 2013 on the MEDLINE database (via PubMed interface) during July 2013. The search words were "hypertension" and "primary care" in combination with each of the terms of "technology", "internet", "computer" and "cell phone". Our inclusion criteria consisted of: (a) Randomized Controlled Trials (RCTs) (b) conducted on human subjects; (c) technology-based interventions (d) to improve self-management (e) of hypertension and if the (f) final results of the study were published in the study. Our exclusion criteria included (a) management of other conditions and (b) literature reviews. The initial search resulted in 108 results. After applying the inclusion and exclusion criteria, a total of 12 studies were analyzed. Various technologies implemented in the studies included internet-based telemonitoring and education, telephone-based telemonitoring and education, internet-based education, telemedicine via videoconferencing, telehealth kiosks and automated modem device. Some studies also involved a physician intervention, in addition to patient intervention. The outcomes of proportion of subjects with BP control and change in mean SBP and DBP were better for the group of subjects who received combined physician and patient interventions. Interventions to improve BP control for self-management of hypertension should be aimed at both physicians as well as the patients. More interventions should utilize the JNC-7 guidelines and cost-effectiveness of the intervention should also be assessed.

CMOS Enabled Microfluidic Systems for Healthcare Based Applications

KAUST Repository

Khan, Sherjeel M.; Gumus, Abdurrahman; Nassar, Joanna M.; Hussain, Muhammad Mustafa

2018-01-01

With the increased global population, it is more important than ever to expand accessibility to affordable personalized healthcare. In this context, a seamless integration of microfluidic technology for bioanalysis and drug delivery and complementary metal oxide semiconductor (CMOS) technology enabled data-management circuitry is critical. Therefore, here, the fundamentals, integration aspects, and applications of CMOS-enabled microfluidic systems for affordable personalized healthcare systems are presented. Critical components, like sensors, actuators, and their fabrication and packaging, are discussed and reviewed in detail. With the emergence of the Internet-of-Things and the upcoming Internet-of-Everything for a people-process-data-device connected world, now is the time to take CMOS-enabled microfluidics technology to as many people as possible. There is enormous potential for microfluidic technologies in affordable healthcare for everyone, and CMOS technology will play a major role in making that happen.

CMOS Enabled Microfluidic Systems for Healthcare Based Applications

KAUST Repository

Khan, Sherjeel M.

2018-02-27

With the increased global population, it is more important than ever to expand accessibility to affordable personalized healthcare. In this context, a seamless integration of microfluidic technology for bioanalysis and drug delivery and complementary metal oxide semiconductor (CMOS) technology enabled data-management circuitry is critical. Therefore, here, the fundamentals, integration aspects, and applications of CMOS-enabled microfluidic systems for affordable personalized healthcare systems are presented. Critical components, like sensors, actuators, and their fabrication and packaging, are discussed and reviewed in detail. With the emergence of the Internet-of-Things and the upcoming Internet-of-Everything for a people-process-data-device connected world, now is the time to take CMOS-enabled microfluidics technology to as many people as possible. There is enormous potential for microfluidic technologies in affordable healthcare for everyone, and CMOS technology will play a major role in making that happen.

A Brief Survey of Media Access Control, Data Link Layer, and Protocol Technologies for Lunar Surface Communications

Science.gov (United States)

Wallett, Thomas M.

2009-01-01

This paper surveys and describes some of the existing media access control and data link layer technologies for possible application in lunar surface communications and the advanced wideband Direct Sequence Code Division Multiple Access (DSCDMA) conceptual systems utilizing phased-array technology that will evolve in the next decade. Time Domain Multiple Access (TDMA) and Code Division Multiple Access (CDMA) are standard Media Access Control (MAC) techniques that can be incorporated into lunar surface communications architectures. Another novel hybrid technique that is recently being developed for use with smart antenna technology combines the advantages of CDMA with those of TDMA. The relatively new and sundry wireless LAN data link layer protocols that are continually under development offer distinct advantages for lunar surface applications over the legacy protocols which are not wireless. Also several communication transport and routing protocols can be chosen with characteristics commensurate with smart antenna systems to provide spacecraft communications for links exhibiting high capacity on the surface of the Moon. The proper choices depend on the specific communication requirements.

Radiation tolerance qualification for maintenance tasks in the future fusion reactors: from fibre-optic components to robust data links

International Nuclear Information System (INIS)

Uffelen, M. van; Fernandez, A. Fernandez; Brichard, B.; Berghmans, F.; Decreton, M.

2003-01-01

The future International Thermonuclear Experimental Reactor (ITER) requires remote handling tools for its maintenance that will operate in a harsh environment. The numerous instrumentation cables for this maintenance equipment call for (de)multiplexing solutions, in order to reduce the umbilical size. Fibre-optic data links, using commercial-off-the-shelf (COTS) components, are seriously considered as a radiation tolerant solution, offering wavelength encoded multiplexing possibilities. However, an adapted modus operandi for a reliable assessment of this evolving technology is needed, to enable their long-term implementation in a radiation environment. In this paper, we present a methodology towards qualification methods for these instrumentation data links, and illustrate it with results obtained for different individual components. These results should enable the future design of robust architectures for communication links

Multimode Communication Protocols Enabling Reconfigurable Radios

Directory of Open Access Journals (Sweden)

Berlemann Lars

2005-01-01

Full Text Available This paper focuses on the realization and application of a generic protocol stack for reconfigurable wireless communication systems. This focus extends the field of software-defined radios which usually concentrates on the physical layer. The generic protocol stack comprises common protocol functionality and behavior which are extended through specific parts of the targeted radio access technology. This paper considers parameterizable modules of basic protocol functions residing in the data link layer of the ISO/OSI model. System-specific functionality of the protocol software is realized through adequate parameterization and composition of the generic modules. The generic protocol stack allows an efficient realization of reconfigurable protocol software and enables a completely reconfigurable wireless communication system. It is a first step from side-by-side realized, preinstalled modes in a terminal towards a dynamic reconfigurable anymode terminal. The presented modules of the generic protocol stack can also be regarded as a toolbox for the accelerated and cost-efficient development of future communication protocols.

CMOS technology: a critical enabler for free-form electronics-based killer applications

Science.gov (United States)

Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

2016-05-01

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

Technological evaluation of gesture and speech interfaces for enabling dismounted soldier-robot dialogue

Science.gov (United States)

Kattoju, Ravi Kiran; Barber, Daniel J.; Abich, Julian; Harris, Jonathan

2016-05-01

With increasing necessity for intuitive Soldier-robot communication in military operations and advancements in interactive technologies, autonomous robots have transitioned from assistance tools to functional and operational teammates able to service an array of military operations. Despite improvements in gesture and speech recognition technologies, their effectiveness in supporting Soldier-robot communication is still uncertain. The purpose of the present study was to evaluate the performance of gesture and speech interface technologies to facilitate Soldier-robot communication during a spatial-navigation task with an autonomous robot. Gesture and speech semantically based spatial-navigation commands leveraged existing lexicons for visual and verbal communication from the U.S Army field manual for visual signaling and a previously established Squad Level Vocabulary (SLV). Speech commands were recorded by a Lapel microphone and Microsoft Kinect, and classified by commercial off-the-shelf automatic speech recognition (ASR) software. Visual signals were captured and classified using a custom wireless gesture glove and software. Participants in the experiment commanded a robot to complete a simulated ISR mission in a scaled down urban scenario by delivering a sequence of gesture and speech commands, both individually and simultaneously, to the robot. Performance and reliability of gesture and speech hardware interfaces and recognition tools were analyzed and reported. Analysis of experimental results demonstrated the employed gesture technology has significant potential for enabling bidirectional Soldier-robot team dialogue based on the high classification accuracy and minimal training required to perform gesture commands.

Quantifying the Impacts of Timebased Rates, Enabling Technology, and Other Treatments in Consumer Behavior Studies: Protocols and Guidelines

Energy Technology Data Exchange (ETDEWEB)

Cappers, Peter [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Todd, Annika [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Perry, Michael [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Neenan, Bernie [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Boisvert, Richard [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

2013-06-27

This report offers guidelines and protocols for measuring the effects of time-based rates, enabling technology, and various other treatments on customers’ levels and patterns of electricity usage. Although the focus is on evaluating consumer behavior studies (CBS) that involve field trials and pilots, the methods can be extended to assessing the large-scale programs that may follow. CBSs are undertaken to resolve uncertainties and ambiguities about how consumers respond to inducements to modify their electricity demand. Those inducements include price structures; feedback and information; and enabling technologies embedded in programs such as: critical peak, time-of use, real-time pricing; peak time rebate or critical peak rebate; home energy reports and in-home displays; and all manner of device controls for appliances and plug loads. Although the focus of this report is on consumer studies—where the subjects are households—the behavioral sciences principles discussed and many of the methods recommended apply equally to studying commercial and industrial customer electricity demand.

NREL Topic 1 Final Report: Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies

Energy Technology Data Exchange (ETDEWEB)

Hudgins, Andrew P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sparn, Bethany F. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jin, Xin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Seal, Brian [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States)

2018-02-21

This document is the final report of a two-year development, test, and demonstration project entitled 'Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies.' The project was part of the National Renewable Energy Laboratory's (NREL) Integrated Network Test-bed for Energy Grid Research and Technology (INTEGRATE) initiative. The Electric Power Research Institute (EPRI) and a team of partners were selected by NREL to carry out a project to develop and test how smart, connected consumer devices can act to enable the use of more clean energy technologies on the electric power grid. The project team includes a set of leading companies that produce key products in relation to achieving this vision: thermostats, water heaters, pool pumps, solar inverters, electric vehicle supply equipment, and battery storage systems. A key requirement of the project was open access at the device level - a feature seen as foundational to achieving a future of widespread distributed generation and storage. The internal intelligence, standard functionality and communication interfaces utilized in this project result in the ability to integrate devices at any level, to work collectively at the level of the home/business, microgrid, community, distribution circuit or other. Collectively, the set of products serve as a platform on which a wide range of control strategies may be developed and deployed.

How do digital platforms for ideas, technologies, and knowledge transfer act as enablers for digital transformation?

OpenAIRE

Hossain, Mokter; Lassen, Astrid Heidemann

2017-01-01

Digital platforms, along with their supporting tools and features, have emerged as important enablers for firms to leverage distributed knowledge (Sedera et al., 2016), because they offer new ways for organizations to collaborate with the external environment for ideas, technologies, and knowledge. Indeed, studies have explored efforts to promote such collaboration on digital platforms with various popular names, such as crowdsourcing platforms (Afuah & Tucci, 2012), open innovation platf...

Website Policies / Important Links | Data Explorer

Science.gov (United States)

Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important ) Publication Date (oldest first) Close Clear All Find DOE Data Explorer Website Policies / Important Links Science | Office of Scientific and Technical Information Website Policies / Important Links * Site Map

CMOS Enabled Microfluidic Systems for Healthcare Based Applications.

Science.gov (United States)

Khan, Sherjeel M; Gumus, Abdurrahman; Nassar, Joanna M; Hussain, Muhammad M

2018-04-01

With the increased global population, it is more important than ever to expand accessibility to affordable personalized healthcare. In this context, a seamless integration of microfluidic technology for bioanalysis and drug delivery and complementary metal oxide semiconductor (CMOS) technology enabled data-management circuitry is critical. Therefore, here, the fundamentals, integration aspects, and applications of CMOS-enabled microfluidic systems for affordable personalized healthcare systems are presented. Critical components, like sensors, actuators, and their fabrication and packaging, are discussed and reviewed in detail. With the emergence of the Internet-of-Things and the upcoming Internet-of-Everything for a people-process-data-device connected world, now is the time to take CMOS-enabled microfluidics technology to as many people as possible. There is enormous potential for microfluidic technologies in affordable healthcare for everyone, and CMOS technology will play a major role in making that happen. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

SLAE-CPS: Smart Lean Automation Engine Enabled by Cyber-Physical Systems Technologies.

Science.gov (United States)

Ma, Jing; Wang, Qiang; Zhao, Zhibiao

2017-06-28

In the context of Industry 4.0, the demand for the mass production of highly customized products will lead to complex products and an increasing demand for production system flexibility. Simply implementing lean production-based human-centered production or high automation to improve system flexibility is insufficient. Currently, lean automation (Jidoka) that utilizes cyber-physical systems (CPS) is considered a cost-efficient and effective approach for improving system flexibility under shrinking global economic conditions. Therefore, a smart lean automation engine enabled by CPS technologies (SLAE-CPS), which is based on an analysis of Jidoka functions and the smart capacity of CPS technologies, is proposed in this study to provide an integrated and standardized approach to design and implement a CPS-based smart Jidoka system. A set of comprehensive architecture and standardized key technologies should be presented to achieve the above-mentioned goal. Therefore, a distributed architecture that joins service-oriented architecture, agent, function block (FB), cloud, and Internet of things is proposed to support the flexible configuration, deployment, and performance of SLAE-CPS. Then, several standardized key techniques are proposed under this architecture. The first one is for converting heterogeneous physical data into uniform services for subsequent abnormality analysis and detection. The second one is a set of Jidoka scene rules, which is abstracted based on the analysis of the operator, machine, material, quality, and other factors in different time dimensions. These Jidoka rules can support executive FBs in performing different Jidoka functions. Finally, supported by the integrated and standardized approach of our proposed engine, a case study is conducted to verify the current research results. The proposed SLAE-CPS can serve as an important reference value for combining the benefits of innovative technology and proper methodology.

SLAE–CPS: Smart Lean Automation Engine Enabled by Cyber-Physical Systems Technologies

Science.gov (United States)

Ma, Jing; Wang, Qiang; Zhao, Zhibiao

2017-01-01

In the context of Industry 4.0, the demand for the mass production of highly customized products will lead to complex products and an increasing demand for production system flexibility. Simply implementing lean production-based human-centered production or high automation to improve system flexibility is insufficient. Currently, lean automation (Jidoka) that utilizes cyber-physical systems (CPS) is considered a cost-efficient and effective approach for improving system flexibility under shrinking global economic conditions. Therefore, a smart lean automation engine enabled by CPS technologies (SLAE–CPS), which is based on an analysis of Jidoka functions and the smart capacity of CPS technologies, is proposed in this study to provide an integrated and standardized approach to design and implement a CPS-based smart Jidoka system. A set of comprehensive architecture and standardized key technologies should be presented to achieve the above-mentioned goal. Therefore, a distributed architecture that joins service-oriented architecture, agent, function block (FB), cloud, and Internet of things is proposed to support the flexible configuration, deployment, and performance of SLAE–CPS. Then, several standardized key techniques are proposed under this architecture. The first one is for converting heterogeneous physical data into uniform services for subsequent abnormality analysis and detection. The second one is a set of Jidoka scene rules, which is abstracted based on the analysis of the operator, machine, material, quality, and other factors in different time dimensions. These Jidoka rules can support executive FBs in performing different Jidoka functions. Finally, supported by the integrated and standardized approach of our proposed engine, a case study is conducted to verify the current research results. The proposed SLAE–CPS can serve as an important reference value for combining the benefits of innovative technology and proper methodology. PMID:28657577

CMOS technology: a critical enabler for free-form electronics-based killer applications

KAUST Repository

Hussain, Muhammad Mustafa

2016-05-17

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today’s CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics – and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is

GeoPro: Technology to Enable Scientific Modeling

International Nuclear Information System (INIS)

C. Juan

2004-01-01

Development of the ground-water flow model for the Death Valley Regional Groundwater Flow System (DVRFS) required integration of numerous supporting hydrogeologic investigations. The results from recharge, discharge, hydraulic properties, water level, pumping, model boundaries, and geologic studies were integrated to develop the required conceptual and 3-D framework models, and the flow model itself. To support the complex modeling process and the needs of the multidisciplinary DVRFS team, a hardware and software system called GeoPro (Geoscience Knowledge Integration Protocol) was developed. A primary function of GeoPro is to manage the large volume of disparate data compiled for the 100,000-square-kilometer area of southern Nevada and California. The data are primarily from previous investigations and regional flow models developed for the Nevada Test Site and Yucca Mountain projects. GeoPro utilizes relational database technology (Microsoft SQL Server(trademark)) to store and manage these tabular point data, groundwater flow model ASCII data, 3-D hydrogeologic framework data, 2-D and 2.5-D GIS data, and text documents. Data management consists of versioning, tracking, and reporting data changes as multiple users access the centralized database. GeoPro also supports the modeling process by automating the routine data transformations required to integrate project software. This automation is also crucial to streamlining pre- and post-processing of model data during model calibration. Another function of GeoPro is to facilitate the dissemination and use of the model data and results through web-based documents by linking and allowing access to the underlying database and analysis tools. The intent is to convey to end-users the complex flow model product in a manner that is simple, flexible, and relevant to their needs. GeoPro is evolving from a prototype system to a production-level product. Currently the DVRFS pre- and post-processing modeling tools are being re

Enabling a systems biology knowledgebase with gaggle and firegoose

Energy Technology Data Exchange (ETDEWEB)

Baliga, Nitin S. [Institute for Systems Biology, Seattle, WA (United States)

2014-12-12

The overall goal of this project was to extend the existing Gaggle and Firegoose systems to develop an open-source technology that runs over the web and links desktop applications with many databases and software applications. This technology would enable researchers to incorporate workflows for data analysis that can be executed from this interface to other online applications. The four specific aims were to (1) provide one-click mapping of genes, proteins, and complexes across databases and species; (2) enable multiple simultaneous workflows; (3) expand sophisticated data analysis for online resources; and enhance open-source development of the Gaggle-Firegoose infrastructure. Gaggle is an open-source Java software system that integrates existing bioinformatics programs and data sources into a user-friendly, extensible environment to allow interactive exploration, visualization, and analysis of systems biology data. Firegoose is an extension to the Mozilla Firefox web browser that enables data transfer between websites and desktop tools including Gaggle. In the last phase of this funding period, we have made substantial progress on development and application of the Gaggle integration framework. We implemented the workspace to the Network Portal. Users can capture data from Firegoose and save them to the workspace. Users can create workflows to start multiple software components programmatically and pass data between them. Results of analysis can be saved to the cloud so that they can be easily restored on any machine. We also developed the Gaggle Chrome Goose, a plugin for the Google Chrome browser in tandem with an opencpu server in the Amazon EC2 cloud. This allows users to interactively perform data analysis on a single web page using the R packages deployed on the opencpu server. The cloud-based framework facilitates collaboration between researchers from multiple organizations. We have made a number of enhancements to the cmonkey2 application to enable and

Enabling technology for MEMS and nanodevices

CERN Document Server

Baltes, Henry; Fedder, Gary K; Hierold, Christofer; Korvink, Jan G; Tabata, Osamu

2013-01-01

This softcover edition of the eponymous volume from the successful ""Advanced Micro & Nanosystems"" series covers all aspects of fabrication of MEMS under CMOS-compatible conditions from design to implementation.It examines the various routes and methods to combine electronics generated by the CMOS technology with novel micromechanical parts into one-chip solutions. Various approaches, fundamental and technological aspects as well as strategies leading to different types of functionalities and presented in detail.For the practicing engineer as well as MSc and PhD students on MEMS cours

Make or buy of IT-enabled innovation

DEFF Research Database (Denmark)

Mahnke, Volker; Overby, Mikkel Lucas; Özcan, Serden

2004-01-01

, an analysis of three companies in the financial sector - Charles Schwab, Fidelity Investment, and Merrill Lynch - reveals that governance choices influence a company's ap-propriable learning curve advantage to slow down or speed up adoption and imitation of IT-enabled innovation. Moreover, we discuss...... the implications of governance choices in techno-logical environments characterised by either accumulation or disruption. Keywords: IT-enabled innovation, outsourcing, technological regime, strategic posture, first-mover advantages, financial services, online brokerage...

An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK.

Science.gov (United States)

Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E S; Adcock, Mike; Gregory-Smith, Diana

2013-02-06

The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics.

An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK

Science.gov (United States)

Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E. S.; Adcock, Mike; Gregory-Smith, Diana

2013-01-01

The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics. PMID:24427512

RFID technology and the EPC network as enablers of mobile business: a case study in a retail supply chain

NARCIS (Netherlands)

Wamba, S.F.; Bendavid, Y.; Lefebvre, L.A.; Lefebvre, E.

2006-01-01

The main objective of this study is to explore the impact of integrating Radio Frequency Identification (RFID) technology and the Electronic Product Code (EPC) network into one specific supply chain in the retail industry and investigate their potentials as enablers of Mobile Business (m-business).

Genetics Home Reference: X-linked creatine deficiency

Science.gov (United States)

... Health Conditions X-linked creatine deficiency X-linked creatine deficiency Printable PDF Open All Close All Enable ... view the expand/collapse boxes. Description X-linked creatine deficiency is an inherited disorder that primarily affects ...

Genetics Home Reference: X-linked sideroblastic anemia

Science.gov (United States)

... Conditions X-linked sideroblastic anemia X-linked sideroblastic anemia Printable PDF Open All Close All Enable Javascript ... the expand/collapse boxes. Description X-linked sideroblastic anemia is an inherited disorder that prevents developing red ...

Wind Energy: Trends And Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Devabhaktuni, Vijay; Alam, Mansoor; Boyapati, Premchand; Chandna, Pankaj; Kumar, Ashok; Lack, Lewis; Nims, Douglas; Wang, Lingfeng

2010-09-15

With attention now focused on the damaging impact of greenhouse gases, wind energy is rapidly emerging as a low carbon, resource efficient, cost-effective sustainable technology in many parts of the world. Despite higher economic costs, offshore appears to be the next big step in wind energy development alternative because of the space scarcity for installation of onshore wind turbine. This paper presents the importance of off-shore wind energy, the wind farm layout design, the off-shore wind turbine technological developments, the role of sensors and the smart grid, and the challenges and future trends of wind energy.

Enabling technologies for silicon microstrip tracking detectors at the HL-LHC

International Nuclear Information System (INIS)

Feld, L.; Karpinski, W.; Klein, K.

2016-04-01

While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative ''Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC'' (PETTL), which was supported by the Helmholtz Alliance ''Physics at the Terascale'' during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R and D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements.

Enabling technologies for silicon microstrip tracking detectors at the HL-LHC

Energy Technology Data Exchange (ETDEWEB)

Feld, L.; Karpinski, W.; Klein, K. [RWTH Aachen Univ. (Germany). 1. Physikalisches Institut B; Collaboration: The PETTL Collaboration; and others

2016-04-15

While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to exchange their tracking systems when the LHC is upgraded to the high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems need to operate in an environment in which both the hit densities and the radiation damage will be about an order of magnitude higher than today. In addition, the new trackers need to contribute to the first level trigger in order to maintain a high data-taking efficiency for the interesting processes. Novel detector technologies have to be developed to meet these very challenging goals. The German groups active in the upgrades of the ATLAS and CMS tracking systems have formed a collaborative ''Project on Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC'' (PETTL), which was supported by the Helmholtz Alliance ''Physics at the Terascale'' during the years 2013 and 2014. The aim of the project was to share experience and to work together on key areas of mutual interest during the R and D phase of these upgrades. The project concentrated on five areas, namely exchange of experience, radiation hardness of silicon sensors, low mass system design, automated precision assembly procedures, and irradiations. This report summarizes the main achievements.

Library Science Talk: "Linked Happily Ever After" - Ruben Verborgh, Ghent University, Belgium

CERN Multimedia

CERN. Geneva

2016-01-01

Ruben Verborgh will talk about "Linked Happily Ever After". Abstract: Linked Data has become an inevitable reality for many libraries. And that is a good thing, because it enables data integration at a scale that was not possible before. At the same time, it also comes with many challenges. What are the “good” ways of doing Linked Data? How can we do it efficiently, at a reasonable cost? And of course: how can we ensure that the efforts we do today pay off in the future? This last question is the main focus of this talk. I will explain what sustainability means in the context of Linked Data, and on which constants we can rely within an ever changing technological landscape. Expect a mix of vision and concrete advice, but mostly solid, down-to-earth discussions on what Linked Data will mean for libraries now and in the future. The talk will be followed by a panel discussion with: Beat Estermann, deputy head of the research unit Linked & Open Data at the E-Government Institute of the Bern University...

S-LINK, a data link interface specification for the LHC era

International Nuclear Information System (INIS)

Bij, H.C. van der; McLaren, R.A.; Boyle, O.

1996-01-01

In the Technical Proposals for ATLAS, CMS and ALICE there is a requirement for several thousand data links. Although there is an obvious need for standardization, this seems difficult to achieve as the links run at different speeds, over different distances and have various constraints of power consumption, size and radiation hardness. An additional complication is that today we cannot decide which will be the most cost effective technology for the implementation of the final links. Furthermore, we must allow designers of boards at each end of the link, for example readout electronics and input buffers, to work in parallel with the development of the links. The S-LINK is a new concept which should provide the benefits of standardization without the limitations. The S-LINK specification defines, at both ends of the link, a simple FIFO-like user interface which remains independent of the technology used to implement the physical link. The physical link provides transfer of event data and control words, error detection, optional flow control and test facilities. This paper describes the S-LINK specification and gives examples of the use of the S-LINK, the physical links being designed, and the test equipment that is being developed

Variable use of standards-based IOS enabling technologies in Australian SMEs : an examination of deliberate and emergent decision making processes

NARCIS (Netherlands)

Power, Damien; Gruner, Richard L.

Use of inter-organizational systems (IOS) is widely recognized as pivotal to organizational success. However, the nature of decision making processes regarding the adoption and use of IOS-enabling technologies has received little research attention. The authors explore approaches to decisionmaking

Enabling distributed collaborative science

DEFF Research Database (Denmark)

Hudson, T.; Sonnenwald, Diane H.; Maglaughlin, K.

2000-01-01

To enable collaboration over distance, a collaborative environment that uses a specialized scientific instrument called a nanoManipulator is evaluated. The nanoManipulator incorporates visualization and force feedback technology to allow scientists to see, feel, and modify biological samples bein...

The Role of Smart Meters in Enabling Real-Time Energy Services for Households: The Italian Case

Directory of Open Access Journals (Sweden)

Alessandro Pitì

2017-02-01

Full Text Available The Smart Meter (SM is an essential tool for successful balancing the demand-offer energy curve. It allows the linking of the consumption and production measurements with the time information and the customer’s identity, enabling the substitution of flat-price billing with smarter solutions, such as Time-of-Use or Real-Time Pricing. In addition to sending data to the energy operators for billing and monitoring purposes, Smart Meters must be able to send the same data to customer devices in near-real-time conditions, enabling new services such as instant energy awareness and home automation. In this article, we review the ongoing situation in Europe regarding real-time services for the final customers. Then, we review the architectural and technological options that have been considered for the roll-out phase of the Italian second generation of Smart Meters. Finally, we identify a collection of use cases, along with their functional and performance requirements, and discuss what architectures and communications technologies can meet these requirements.

Digital watermarking opportunities enabled by mobile media proliferation

Science.gov (United States)

Modro, Sierra; Sharma, Ravi K.

2009-02-01

Consumer usages of mobile devices and electronic media are changing. Mobile devices now include increased computational capabilities, mobile broadband access, better integrated sensors, and higher resolution screens. These enhanced features are driving increased consumption of media such as images, maps, e-books, audio, video, and games. As users become more accustomed to using mobile devices for media, opportunities arise for new digital watermarking usage models. For example, transient media, like images being displayed on screens, could be watermarked to provide a link between mobile devices. Applications based on these emerging usage models utilizing watermarking can provide richer user experiences and drive increased media consumption. We describe the enabling factors and highlight a few of the usage models and new opportunities. We also outline how the new opportunities are driving further innovation in watermarking technologies. We discuss challenges in market adoption of applications based on these usage models.

Charge initiation schemes for ensuring high-performance operation of cyclic-flow technology cyclic link

Directory of Open Access Journals (Sweden)

S. N. Zharikov

2017-09-01

Full Text Available The authors consider the issue of ensuring the quality of crushing rock mass by drilling and blasting method for high productivity of a cyclic link of a cyclic-flow technology complex. The article contains recommendations for calculating certain parameters of drilling and blasting operations, such as the width of the retaining wall Bp. s, the collapse with account for the retaining wall Вr, the width of the collapse of the rock mass Bf when blasting onto a free surface (for the first row of vertical wells and for the first series of inclined wells, the width of the collapse from the first series of wells B1, the deceleration time τ, the coefficient kβ that takes into account the incline angle of wells β to the horizon. The authors prove the expediency of using a retaining wall in explosions of technological blocks. The authors raise the question about the management of detonation characteristics of explosives produced in the field of application for the most rational impact of an explosion on a rock massif. Since the technological schemes for preparing the rock mass to the excavation, which ensure the high-performance operation of the cyclic link of the cyclic-flow technology, can be different, then the choice of a specific drilling and blasting circuit is depends on the geological conditions and elements of the development system. As a preliminary method of breaking, one can consider the explosion of charges along the diagonal (diagonal blasting schemes on the retaining wall. This method provides sufficient reliability of technological explosions, and with the development of modern means of blasting with decelerations between charges of more than 67 ms, there are nearly no back emissions.

CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications

KAUST Repository

Hussain, Aftab M.

2015-11-26

Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today\\'s digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Perception of Information Technology Enablers for Effective Supply Chain Management

NARCIS (Netherlands)

Fedor Brookman; Jakobus Smit; Gilbert Gilbert Silvius

2012-01-01

This paper reports a study on the importance of enablers in order for IT to support effective supply chain management, as perceived defined by different positions in the supply chain. In the study, a significant difference for the enabler “Funds for IT enablement” is found between the supplier

Health Technology-Enabled Interventions for Adherence Support and Retention in Care Among US HIV-Infected Adolescents and Young Adults: An Integrative Review.

Science.gov (United States)

Navarra, Ann-Margaret Dunn; Gwadz, Marya Viorst; Whittemore, Robin; Bakken, Suzanne R; Cleland, Charles M; Burleson, Winslow; Jacobs, Susan Kaplan; Melkus, Gail D'Eramo

2017-11-01

The objective of this integrative review was to describe current US trends for health technology-enabled adherence interventions among behaviorally HIV-infected youth (ages 13-29 years), and present the feasibility and efficacy of identified interventions. A comprehensive search was executed across five electronic databases (January 2005-March 2016). Of the 1911 identified studies, nine met the inclusion criteria of quantitative or mixed methods design, technology-enabled adherence and or retention intervention for US HIV-infected youth. The majority were small pilots. Intervention dose varied between studies applying similar technology platforms with more than half not informed by a theoretical framework. Retention in care was not a reported outcome, and operationalization of adherence was heterogeneous across studies. Despite these limitations, synthesized findings from this review demonstrate feasibility of computer-based interventions, and initial efficacy of SMS texting for adherence support among HIV-infected youth. Moving forward, there is a pressing need for the expansion of this evidence base.

A methodology to enable rapid evaluation of aviation environmental impacts and aircraft technologies

Science.gov (United States)

Becker, Keith Frederick

Commercial aviation has become an integral part of modern society and enables unprecedented global connectivity by increasing rapid business, cultural, and personal connectivity. In the decades following World War II, passenger travel through commercial aviation quickly grew at a rate of roughly 8% per year globally. The FAA's most recent Terminal Area Forecast predicts growth to continue at a rate of 2.5% domestically, and the market outlooks produced by Airbus and Boeing generally predict growth to continue at a rate of 5% per year globally over the next several decades, which translates into a need for up to 30,000 new aircraft produced by 2025. With such large numbers of new aircraft potentially entering service, any negative consequences of commercial aviation must undergo examination and mitigation by governing bodies so that growth may still be achieved. Options to simultaneously grow while reducing environmental impact include evolution of the commercial fleet through changes in operations, aircraft mix, and technology adoption. Methods to rapidly evaluate fleet environmental metrics are needed to enable decision makers to quickly compare the impact of different scenarios and weigh the impact of multiple policy options. As the fleet evolves, interdependencies may emerge in the form of tradeoffs between improvements in different environmental metrics as new technologies are brought into service. In order to include the impacts of these interdependencies on fleet evolution, physics-based modeling is required at the appropriate level of fidelity. Evaluation of environmental metrics in a physics-based manner can be done at the individual aircraft level, but will then not capture aggregate fleet metrics. Contrastingly, evaluation of environmental metrics at the fleet level is already being done for aircraft in the commercial fleet, but current tools and approaches require enhancement because they currently capture technology implementation through post

Mars Relay Satellite: Key to Enabling Low-Cost Exploration Missions

Science.gov (United States)

Hastrup, R.; Cesarone, R.; Miller, A.

1993-01-01

Recently, there has been increasing evidence of a renewed focus on Mars exploration both by NASA and the international community. The thrust of this renewed interest appears to be manifesting itself in numerous low-cost missions employing small, light weight elements, which utilize advanced technologies including integrated microelectronics. A formidable problem facing these low-cost missions is communications with Earth. Providing adequate direct-link performance has very significant impacts on spacecraft power, pointing, mass and overall complexity. Additionally, for elements at or near the surface of Mars, there are serious connectivity constraints, especially at higher latitudes, which lose view of Earth for up to many months at a time. This paper will discuss the role a Mars relay satellite can play in enabling and enhancing low-cost missions to Mars...

Electronic Communications Technologies and the Transition to College: Links to Parent-Child Attachment and Adjustment

Science.gov (United States)

Sarigiani, Pamela A.; Trumbell, Jill M.; Camarena, Phame M.

2013-01-01

Electronic communications technologies (ECTs) help college students and parents remain in contact. Because recent reports have emphasized a link between ECTs, helicopter parenting, and autonomy issues, this study focused on the significance of contact patterns for attachment and student adjustment. First-semester college students (199 female, 81…

Wireless Device-to-Device (D2D) Links for Machine-to-Machine (M2M) Communication

DEFF Research Database (Denmark)

Pratas, Nuno; Popovski, Petar

2017-01-01

Device-to-Device (D2D) communications will play an important role in the fifth generation (5G) cellular networks, by increasing the spatial reuse of spectrum resources and enabling communication links with low latency. D2D is composed of two fundamental building blocks: proximity discovery...... and direct communication between nearby users. Another emerging trend in wireless cellular systems is Machine-to-Machine (M2M) communications, often characterized by fixed, low transmission rates. In this chapter we motivate the synergy between D2D and M2M, and present technologies that enable M2M-via-D2D...

Bluetooth enables in-door mobile location services

DEFF Research Database (Denmark)

Thongthammachart, Saowanee; Olesen, Henning

2003-01-01

Several technologies can be applied to enable mobile location services, but most of them suffer from limited accuracy and availability. GPS can solve the problem of determining the location of users in most outdoor situations, but an end-user position inside a building cannot be pinpointed. Other...... mobile location techniques can also provide the user's position, but the accuracy is rather low. In order to improve the accuracy and make location-based services really attractive, existing approaches must be supplemented by new technologies. Wireless short-range technologies like Bluetooth could...... be candidates for solving these problems. This paper shows that Bluetooth can act as a key enabler of mobile location services in an in-door environment. The advantage of Bluetooth technology is, that it can provide rather precise location data inside a building or hotspot area, while the Bluetooth terminal...

Reactive electrospinning and biodegradation of cross-linked methacrylated polycarbonate nanofibers

Energy Technology Data Exchange (ETDEWEB)

Wu Ruizhi; Zhang Jianfeng; Fan Yuwei; Xu Xiaoming [Department of Comprehensive Dentistry and Biomaterials, Louisiana State University Health Sciences Center, 1100 Florida Avenue, Box 137, New Orleans, LA 70119 (United States); Stoute, Diana; Lallier, Thomas, E-mail: xxu@lsuhsc.edu [Department of Cell Biology and Anatomy, Louisiana State University Health Science Center, 1100 Florida Avenue, Box 137, New Orleans, LA 70119 (United States)

2011-06-15

The objectives of this study were to fabricate cross-linked biodegradable polycarbonate nanofibers and to investigate their biodegradability by different enzymes. Poly(2,3-dihydroxycarbonate) was synthesized from naturally occurring l-tartaric acid. The hydroxyl groups on the functional polycarbonate were converted to methacrylate groups to enable the polymer to cross-link under UV irradiation. Smooth cross-linked methacrylated polycarbonate nanofibers (300-1800 nm) were fabricated by a reactive electrospinning process with in situ UV radiation from a mixed solution of linear methacrylated polycarbonate (MPC) and poly(ethylene oxide) (PEO) (MPC:PEO = 9:1) in methanol/chloroform (50/50). These cross-linked nanofibers have shown excellent solvent resistance and their solubility decreases with increasing degree of cross-linking. The thermal properties of linear and cross-linked polycarbonate nanofibers were investigated by differential scanning calorimetry and thermogravimetric analysis. The cross-linked polycarbonate nanofibers show no melting point below 200 {sup 0}C and their decomposition temperature increases with increasing cross-linking degree. Their biodegradation products by five different enzymes were analyzed using liquid chromatography-mass spectrometry (LC-MS). The biodegradability of the polycarbonate nanofibers decreases with increasing cross-linking degree. These nanofibers were found to support human fibroblast survival and to promote cell attachment. This study demonstrates that cross-linked biodegradable polycarbonate nanofibers with different chemical properties and biodegradability can be fabricated using the novel reactive electrospinning technology to meet the needs of different biomedical applications.

Introducing a technology-enabled problem-based learning approach into a health informatics curriculum.

Science.gov (United States)

Green, Carolyn J; van Gyn, Geraldine H; Moehr, Jochen R; Lau, Francis Y; Coward, Patricia M

2004-03-18

To investigate the effect on learner satisfaction of introducing a technology-enabled problem-based learning (PBL) approach into a health informatics curriculum. Course redesign was undertaken to prepare students for three 4-month work terms and a rapidly changing professional environment upon graduation. Twenty-six Canadian undergraduate students of a redesigned course in biomedical fundamentals completed a midterm questionnaire in 2002. Eight of these students participated in a focus group. Students agreed that seven of nine functions provided by the web-based online course management system enhanced their learning: private email (92.3%), calendaring (88.5%), course notes (88.5%), discussion forums (84.5%), online grades (84.5%) assignment descriptions (80.8%) and online quizzes (80.8%). Although students agreed that two PBL activities enhanced learning (learning to present information) (84.5%) and learning to identify information needed (73.1%), the majority of students (69.2%) expressed a preference for the traditional lecture approach over the PBL approach. Students reported feeling uncertain of what was required of them and related anxiety accounted for most of the negative feedback. These findings give us clear goals for improvement in the course beginning with a comprehensive, carefully guided introduction to the processes of PBL. The positive trends are encouraging for the use of web-enabled courseware and for the further development of the PBL approach.

Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies

Science.gov (United States)

Jutte, Christine; Stanford, Bret K.

2014-01-01

This paper provides a brief overview of the state-of-the-art for aeroelastic tailoring of subsonic transport aircraft and offers additional resources on related research efforts. Emphasis is placed on aircraft having straight or aft swept wings. The literature covers computational synthesis tools developed for aeroelastic tailoring and numerous design studies focused on discovering new methods for passive aeroelastic control. Several new structural and material technologies are presented as potential enablers of aeroelastic tailoring, including selectively reinforced materials, functionally graded materials, fiber tow steered composite laminates, and various nonconventional structural designs. In addition, smart materials and structures whose properties or configurations change in response to external stimuli are presented as potential active approaches to aeroelastic tailoring.

Expedient preparation of nazlinine and a small library of indole alkaloids using flow electrochemistry as an enabling technology.

Science.gov (United States)

Kabeshov, Mikhail A; Musio, Biagia; Murray, Philip R D; Browne, Duncan L; Ley, Steven V

2014-09-05

An expedient synthesis of the indole alkaloid nazlinine is reported. Judicious choice of flow electrochemistry as an enabling technology has permitted the rapid generation of a small library of unnatural relatives of this biologically active molecule. Furthermore, by conducting the key electrochemical Shono oxidation in a flow cell, the loading of electrolyte can be significantly reduced to 20 mol % while maintaining a stable, broadly applicable process.

Born semantic: linking data from sensors to users and balancing hardware limitations with data standards

Science.gov (United States)

Buck, Justin; Leadbetter, Adam

2015-04-01

New users for the growing volume of ocean data for purposes such as 'big data' data products and operational data assimilation/ingestion require data to be readily ingestible. This can be achieved via the application of World Wide Web Consortium (W3C) Linked Data and Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE) standards to data management. As part of several Horizons 2020 European projects (SenseOCEAN, ODIP, AtlantOS) the British Oceanographic Data Centre (BODC) are working on combining existing data centre architecture and SWE software such as Sensor Observation Services with a Linked Data front end. The standards to enable data delivery are proven and well documented1,2 There are practical difficulties when SWE standards are applied to real time data because of internal hardware bandwidth restrictions and a requirement to constrain data transmission costs. A pragmatic approach is proposed where sensor metadata and data output in OGC standards are implemented "shore-side" with sensors and instruments transmitting unique resolvable web linkages to persistent OGC SensorML records published at the BODC. References: 1. World Wide Web Consortium. (2013). Linked Data. Available: http://www.w3.org/standards/semanticweb/data. Last accessed 8th October 2014. 2. Open Geospatial Consortium. (2014). Sensor Web Enablement (SWE). Available: http://www.opengeospatial.org/ogc/markets-technologies/swe. Last accessed 8th October 2014.

Reconfigurable Computing As an Enabling Technology for Single-Photon-Counting Laser Altimetry

Science.gov (United States)

Powell, Wesley; Hicks, Edward; Pinchinat, Maxime; Dabney, Philip; McGarry, Jan; Murray, Paul

2003-01-01

Single-photon-counting laser altimetry is a new measurement technique offering significant advantages in vertical resolution, reducing instrument size, mass, and power, and reducing laser complexity as compared to analog or threshold detection laser altimetry techniques. However, these improvements come at the cost of a dramatically increased requirement for onboard real-time data processing. Reconfigurable computing has been shown to offer considerable performance advantages in performing this processing. These advantages have been demonstrated on the Multi-KiloHertz Micro-Laser Altimeter (MMLA), an aircraft based single-photon-counting laser altimeter developed by NASA Goddard Space Flight Center with several potential spaceflight applications. This paper describes how reconfigurable computing technology was employed to perform MMLA data processing in real-time under realistic operating constraints, along with the results observed. This paper also expands on these prior results to identify concepts for using reconfigurable computing to enable spaceflight single-photon-counting laser altimeter instruments.

Why should we publish Linked Data?

Science.gov (United States)

Blower, Jon; Riechert, Maik; Koubarakis, Manolis; Pace, Nino

2016-04-01

publishing Linked Data will result in tangible user benefits. This presentation will address a number of these issues, using real-world experience gathered from four recent European projects: MELODIES (http://melodiesproject.eu), LEO (http://linkedeodata.eu), CHARMe (http://linkedeodata.eu) and TELEIOS (http://www.earthobservatory.eu). These projects have all applied Linked Data techniques in practical, real-world situations involving the use of diverse data (including earth science data) by both industrial and academic users. Specifically, we will: • Identify a set of practical and valuable uses for Linked Data, focusing on areas where Linked Data fills gaps left by other technologies. These uses include: enabling the discovery of earth science data using mass-market search engines, helping users to understand data and its uses, combining data from multiple sources and enabling the annotation of data by users. • Enumerate some common challenges faced by developers of data-driven services who wish to use Linked Data in their applications. • Describe a new suite of tools for managing, processing and visualising Linked Data in earth science applications (including geospatial Linked Data).

Technologically Reflective Individuals as Enablers of Social Innovation*

Science.gov (United States)

Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

2015-01-01

This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco‐challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy‐to‐administer multi‐item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co‐creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process. PMID:27134342

Technologically Reflective Individuals as Enablers of Social Innovation.

Science.gov (United States)

Schweitzer, Fiona; Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

2015-11-01

This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco-challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy-to-administer multi-item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co-creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process.

Prospective Technology Assessment of Synthetic Biology: Fundamental and Propaedeutic Reflections in Order to Enable an Early Assessment.

Science.gov (United States)

Schmidt, Jan Cornelius

2016-08-01

Synthetic biology is regarded as one of the key technosciences of the future. The goal of this paper is to present some fundamental considerations to enable procedures of a technology assessment (TA) of synthetic biology. To accomplish such an early "upstream" assessment of a not yet fully developed technology, a special type of TA will be considered: Prospective TA (ProTA). At the center of ProTA are the analysis and the framing of "synthetic biology," including a characterization and assessment of the technological core. The thesis is that if there is any differentia specifica giving substance to the umbrella term "synthetic biology," it is the idea of harnessing self-organization for engineering purposes. To underline that we are likely experiencing an epochal break in the ontology of technoscientific systems, this new type of technology is called "late-modern technology." -I start this paper by analyzing the three most common visions of synthetic biology. Then I argue that one particular vision deserves more attention because it underlies the others: the vision of self-organization. I discuss the inherent limits of this new type of late-modern technology in the attempt to control and monitor possible risk issues. I refer to Hans Jonas' ethics and his early anticipation of the risks of a novel type of technology. I end by drawing conclusions for the approach of ProTA towards an early societal shaping of synthetic biology.

The Nuclear Energy Advanced Modeling and Simulation Enabling Computational Technologies FY09 Report

Energy Technology Data Exchange (ETDEWEB)

Diachin, L F; Garaizar, F X; Henson, V E; Pope, G

2009-10-12

In this document we report on the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Enabling Computational Technologies (ECT) effort. In particular, we provide the context for ECT In the broader NEAMS program and describe the three pillars of the ECT effort, namely, (1) tools and libraries, (2) software quality assurance, and (3) computational facility (computers, storage, etc) needs. We report on our FY09 deliverables to determine the needs of the integrated performance and safety codes (IPSCs) in these three areas and lay out the general plan for software quality assurance to meet the requirements of DOE and the DOE Advanced Fuel Cycle Initiative (AFCI). We conclude with a brief description of our interactions with the Idaho National Laboratory computer center to determine what is needed to expand their role as a NEAMS user facility.

Introducing technology learning for energy technologies in a national CGE model through soft links to global and national energy models

International Nuclear Information System (INIS)

Martinsen, Thomas

2011-01-01

This paper describes a method to model the influence by global policy scenarios, particularly spillover of technology learning, on the energy service demand of the non-energy sectors of the national economy. It is exemplified by Norway. Spillover is obtained from the technology-rich global Energy Technology Perspective model operated by the International Energy Agency. It is provided to a national hybrid model where a national bottom-up Markal model carries forward spillover into a national top-down CGE model at a disaggregated demand category level. Spillover of technology learning from the global energy technology market will reduce national generation costs of energy carriers. This may in turn increase demand in the non-energy sectors of the economy because of the rebound effect. The influence of spillover on the Norwegian economy is most pronounced for the production level of industrial chemicals and for the demand for electricity for residential energy services. The influence is modest, however, because all existing electricity generating capacity is hydroelectric and thus compatible with the low emission policy scenario. In countries where most of the existing generating capacity must be replaced by nascent energy technologies or carbon captured and storage the influence on demand is expected to be more significant. - Highlights: → Spillover of global technology learning may be forwarded into a macroeconomic model. → The national electricity price differs significantly between the different global scenarios. → Soft-linking global and national models facilitate transparency in the technology learning effect chain.

Nordic Housing Enabler

DEFF Research Database (Denmark)

Helle, Tina; Brandt, Åse

Development and reliability testing of the Nordic Housing Enabler – an instrument for accessibility assessment of the physical housing. Tina Helle & Åse Brandt University of Lund, Health Sciences, Faculty of Medicine (SE) and University College Northern Jutland, Occupational Therapy department (DK......). Danish Centre for Assistive Technology. Abstract. For decades, accessibility to the physical housing environment for people with functional limitations has been of interest politically, professionally and for the users. Guidelines and norms on accessible housing design have gradually been developed......, however, the built environment shows serious deficits when it comes to accessibility. This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of inter-rater reliability, when used in occupational therapy practice. The instrument was translated from...

Operator overloading as an enabling technology for automatic differentiation

International Nuclear Information System (INIS)

Corliss, G.F.; Griewank, A.

1993-01-01

We present an example of the science that is enabled by object-oriented programming techniques. Scientific computation often needs derivatives for solving nonlinear systems such as those arising in many PDE algorithms, optimization, parameter identification, stiff ordinary differential equations, or sensitivity analysis. Automatic differentiation computes derivatives accurately and efficiently by applying the chain rule to each arithmetic operation or elementary function. Operator overloading enables the techniques of either the forward or the reverse mode of automatic differentiation to be applied to real-world scientific problems. We illustrate automatic differentiation with an example drawn from a model of unsaturated flow in a porous medium. The problem arises from planning for the long-term storage of radioactive waste

A Technology Plan for Enabling Commercial Space Business

Science.gov (United States)

Lyles, Garry M.

1997-01-01

The National Aeronautics and Space Administration's (NASA) Advanced Space Transportation Program is a customer driven, focused technology program that supports the NASA Strategic Plan and considers future commercial space business projections. The initial cycle of the Advanced Space Transportation Program implementation planning was conducted from December 1995 through February 1996 and represented increased NASA emphasis on broad base technology development with the goal of dramatic reductions in the cost of space transportation. The second planning cycle, conducted in January and February 1997, updated the program implementation plan based on changes in the external environment, increased maturity of advanced concept studies, and current technology assessments. The program has taken a business-like approach to technology development with a balanced portfolio of near, medium, and long-term strategic targets. Strategic targets are influenced by Earth science, space science, and exploration objectives as well as commercial space markets. Commercial space markets include those that would be enhanced by lower cost transportation as well as potential markets resulting in major increases in space business induced by reductions in transportation cost. The program plan addresses earth-to-orbit space launch, earth orbit operations and deep space systems. It also addresses all critical transportation system elements; including structures, thermal protection systems, propulsion, avionics, and operations. As these technologies are matured, integrated technology flight experiments such as the X-33 and X-34 flight demonstrator programs support near-term (one to five years) development or operational decisions. The Advanced Space Transportation Program and the flight demonstrator programs combine business planning, ground-based technology demonstrations and flight demonstrations that will permit industry and NASA to commit to revolutionary new space transportation systems

Analysis of a Moon outpost for Mars enabling technologies through a Virtual Reality environment

Science.gov (United States)

Casini, Andrea E. M.; Maggiore, Paolo; Viola, Nicole; Basso, Valter; Ferrino, Marinella; Hoffman, Jeffrey A.; Cowley, Aidan

2018-02-01

The Moon is now being considered as the starting point for human exploration of the Solar System beyond low-Earth orbit. Many national space agencies are actively advocating to build up a lunar surface habitat capability starting from 2030 or earlier: according to ESA Technology Roadmaps for Exploration this should be the result of a broad international cooperation. Taking into account an incremental approach to reduce risks and costs of space missions, a lunar outpost can be considered as a test bed towards Mars, allowing to validate enabling technologies, such as water processing, waste management, power generation and storage, automation, robotics and human factors. Our natural satellite is rich in resources that could be used to pursue such a goal through a necessary assessment of ISRU techniques. The aim of this research is the analysis of a Moon outpost dedicated to the validation of enabling technologies for human space exploration. The main building blocks of the outpost are identified and feasible evolutionary scenarios are depicted, to highlight the incremental steps to build up the outpost. Main aspects that are dealt with include outpost location and architecture, as well as ISRU facilities, which in a far term future can help reduce the mass at launch, by producing hydrogen and oxygen for consumables, ECLSS, and propellant for Earth-Moon sorties and Mars journeys. A test outpost is implemented in a Virtual Reality (VR) environment as a first proof-of-concepts, where the elements are computer-based mock-ups. The VR facility has a first-person interactive perspective, allowing for specific in-depth analyses of ergonomics and operations. The feedbacks of these analyses are crucial to highlight requirements that might otherwise be overlooked, while their general outputs are fundamental to write down procedures. Moreover, the mimic of astronauts' EVAs is useful for pre-flight training, but can also represent an additional tool for failures troubleshooting

An IT-enabled supply chain model: a simulation study

Science.gov (United States)

Cannella, Salvatore; Framinan, Jose M.; Barbosa-Póvoa, Ana

2014-11-01

During the last decades, supply chain collaboration practices and the underlying enabling technologies have evolved from the classical electronic data interchange (EDI) approach to a web-based and radio frequency identification (RFID)-enabled collaboration. In this field, most of the literature has focused on the study of optimal parameters for reducing the total cost of suppliers, by adopting operational research (OR) techniques. Herein we are interested in showing that the considered information technology (IT)-enabled structure is resilient, that is, it works well across a reasonably broad range of parameter settings. By adopting a methodological approach based on system dynamics, we study a multi-tier collaborative supply chain. Results show that the IT-enabled supply chain improves operational performance and customer service level. Nonetheless, benefits for geographically dispersed networks are of minor entity.

Life Saving Apps: Linking Cardiac Arrest Victims to Emergency Services and Volunteer Responders.

Science.gov (United States)

Lim Choi Keung, Sarah N; Khan, Mohammed O; Smith, Christopher; Perkins, Gavin; Murphy, Paddie; Arvanitis, Theodoros N

2016-01-01

In cases of emergency, such as out-of-hospital cardiac arrests, the first few minutes are crucial for victims to receive care and have a positive outcome. However, emergency services often arrive on scene after those first few minutes, making any bridging solutions key. Finding a defibrillator or accessing a trained volunteer responder are some of the technological solutions that are being developed to support the chain of survival. This paper looks at technologies, in particular those linked to mobile apps that have been used to locate defibrillators and responder apps that enable responders to attend to nearby emergencies. We review a selection of apps and also assess the challenges and considerations for such apps.

Linking the space shuttle and space stations early docking technologies from concept to implementation

CERN Document Server

Shayler, David J

2017-01-01

How could the newly authorized space shuttle help in the U.S. quest to build a large research station in Earth orbit? As a means of transporting goods, the shuttle could help supply the parts to the station. But how would the two entitles be physically linked? Docking technologies had to constantly evolve as the designs of the early space stations changed. It was hoped the shuttle would make missions to the Russian Salyut and American Skylab stations, but these were postponed until the Mir station became available, while plans for getting a new U. S. space station underway were stalled. In Linking the Space Shuttle and Space Stations, the author delves into the rich history of the Space Shuttle and its connection to these early space stations, culminating in the nine missions to dock the shuttle to Mir. By 1998, after nearly three decades of planning and operations, shuttle missions to Mir had resulted in: • A proven system to link up the space shuttle to a space station • Equipment and hands-on experienc...

Working conditions and health among employees at information technology--enabled services: a review of current evidence.

Science.gov (United States)

Kesavachandran, C; Rastogi, S K; Das, Mohan; Khan, Asif M

2006-07-01

Workers in information technology (IT)-enabled services like business process outsourcing and call centers working with visual display units are reported to have various health and psycho-social disorders. Evidence from previously published studies in peer- reviewed journals and internet sources were examined to explore health disorders and psycho-social problems among personnel employed in IT-based services, for a systematic review on the topic. In addition, authors executed a questionnaire- based pilot study. The available literature and the pilot study, both suggest health disorders and psychosocial problems among workers of business process outsourcing. The details are discussed in the review.

"LinkedIn" for Accounting and Business Students

Science.gov (United States)

Albrecht, W. David

2011-01-01

LinkedIn is a social media application that every accounting and business student should join and use. LinkedIn is a database of 90,000,000 business professionals that enables each to connect and interact with their business associates. Five reasons are offered for why accounting students should join LinkedIn followed by 11 hints for use.

Scientific Data Management Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Vouk, Mladen A.

2013-01-15

Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

Advanced technologies for encryption of satellite links

Science.gov (United States)

McMahan, Sherry S.

The use of encryption on satellite links is discussed. Advanced technology exists to provide transmission security for large earth station with data rates up to 50 megabits per second. One of the major concerns in the use of encryption equipment with very small aperture terminals (VSAT) is the key management issue and the related operational costs. The low cost requirement and the lack of physical protection of remote VSATs place severe constraints on the design of encryption equipment. Encryption may be accomplished by embedding a tamper proof encryption module into the baseband unit of each VSAT. VSAT networks are usually star networks where there is a single large earth station that serves as a hub and all satellite communications takes place between each VSAT and the hub earth station. The hub earth station has the secret master key of each VSAT. These master keys are used to downline load encrypted session keys to each VSAT. A more secure alternative is to use public key techniques where each embedded VSAT encryption module internally generates its own secret and public numbers. The secret number never leaves the module while the public number is sent to the hub at the time of initialization of the encryption module into the VSAT. Physical access control to encryption modules of VSAT systems can be implemented using passwords, smart cards or biometrics.

Launch Vehicles Based on Advanced Hybrid Rocket Motors: An Enabling Technology for the Commercial Small and Micro Satellite Planetary Science

Science.gov (United States)

Karabeyoglu, Arif; Tuncer, Onur; Inalhan, Gokhan

2016-07-01

Mankind is relient on chemical propulsion systems for space access. Nevertheless, this has been a stagnant area in terms of technological development and the technology base has not changed much almost for the past forty years. This poses a vicious circle for launch applications such that high launch costs constrain the demand and low launch freqencies drive costs higher. This also has been a key limiting factor for small and micro satellites that are geared towards planetary science. Rather this be because of the launch frequencies or the costs, the access of small and micro satellites to orbit has been limited. With today's technology it is not possible to escape this circle. However the emergence of cost effective and high performance propulsion systems such as advanced hybrid rockets can decrease launch costs by almost an order or magnitude. This paper briefly introduces the timeline and research challenges that were overcome during the development of advanced hybrid LOX/paraffin based rockets. Experimental studies demonstrated effectiveness of these advanced hybrid rockets which incorporate fast burning parafin based fuels, advanced yet simple internal balistic design and carbon composite winding/fuel casting technology that enables the rocket motor to be built from inside out. A feasibility scenario is studied using these rocket motors as building blocks for a modular launch vehicle capable of delivering micro satellites into low earth orbit. In addition, the building block rocket motor can be used further solar system missions providing the ability to do standalone small and micro satellite missions to planets within the solar system. This enabling technology therefore offers a viable alternative in order to escape the viscous that has plagued the space launch industry and that has limited the small and micro satellite delivery for planetary science.

Service Migration Protocol for NFC Links

DEFF Research Database (Denmark)

Nickelsen, Anders; Schwefel, Hans-Peter; Martin, Miquel

2010-01-01

of use while preserving state. This paper focuses on the scenario of migration between two devices in which the actual migration procedure is executed over near-field communication (NFC) ad-hoc links. The NFC link is interesting as it gives the user the perception of trust and enables service continuity...

NASA Program Office Technology Investments to Enable Future Missions

Science.gov (United States)

Thronson, Harley; Pham, Thai; Ganel, Opher

2018-01-01

The Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Program Offices (POs) reside at NASA GSFC and implement priorities for the NASA HQ Astrophysics Division (APD). One major aspect of the POs’ activities is managing our Strategic Astrophysics Technology (SAT) program to mature technologies for future strategic missions. The Programs follow APD guidance on which missions are strategic, currently informed by the NRC’s 2010 Decadal Survey report, as well as APD’s Implementation Plan and the Astrophysics Roadmap.In preparation for the upcoming 2020 Decadal Survey, the APD has established Science and Technology Definition Teams (STDTs) to study four large-mission concepts: the Origins Space Telescope (née, Far-IR Surveyor), Habitable Exoplanet Imaging Mission, Large UV/Optical/IR Surveyor, and Lynx (née, X-ray Surveyor). The STDTs will develop the science case and design reference mission, assess technology development needs, and estimate the cost of their concept. A fifth team, the L3 Study Team (L3ST), was charged to study potential US contributions to ESA’s planned Laser Interferometer Space Antenna (LISA) gravitational-wave observatory.The POs use a rigorous and transparent process to solicit technology gaps from the scientific and technical communities, and prioritize those entries based on strategic alignment, expected impact, cross-cutting applicability, and urgency. For the past two years, the technology-gap assessments of the four STDTs and the L3ST are included in our process. Until a study team submits its final report, community-proposed changes to gaps submitted or adopted by a study team are forwarded to that study team for consideration.We discuss our technology development process, with strategic prioritization informing calls for SAT proposals and informing investment decisions. We also present results of the 2017 technology gap prioritization and showcase our current portfolio of technology development projects. To date, 96 COR and 86

Enabling Sustainable Improvement in IT Entrepreneurship

Directory of Open Access Journals (Sweden)

Paul E. Renaud

2013-06-01

Full Text Available Firms must embrace processes that enable the information technology (IT function to become a strategic partner to the business functions it serves. Process ambidexterity is a way for processes to be augmented to improve alignment and adaptability to new markets and technologies. By applying the principles of process ambidexterity, the key elements required for sustainable change within the capabilities that comprise the IT function of the firm are identified. Furthermore, the scope and depth of the dysfunction that is widespread across large firms that depend upon IT are outlined to provide a contextual basis for presenting a solution framework to address sustainable change. This framework for sustainable change is of primary benefit to IT executives seeking to systematically transform the IT function and enable IT entrepreneurship.

Uptake and diffusion of medical technology innovation in Europe: what role for funding and procurement policies?

OpenAIRE

Torbica, Aleksandra; Cappellaro, Giulia

2010-01-01

The producers of medical technology constantly strive to innovate and to improve their products for the benefit of patients. With each new generation of devices enabling less invasive techniques, better clinical outcomes and reduced recovery times, patients are direct beneficiaries of this commitment to innovation. Innovation and patient access to technology are inseparably linked with each national health system's respective coverage, procurement and reimbursement policies. If a particular i...

Lithography for enabling advances in integrated circuits and devices.

Science.gov (United States)

Garner, C Michael

2012-08-28

Because the transistor was fabricated in volume, lithography has enabled the increase in density of devices and integrated circuits. With the invention of the integrated circuit, lithography enabled the integration of higher densities of field-effect transistors through evolutionary applications of optical lithography. In 1994, the semiconductor industry determined that continuing the increase in density transistors was increasingly difficult and required coordinated development of lithography and process capabilities. It established the US National Technology Roadmap for Semiconductors and this was expanded in 1999 to the International Technology Roadmap for Semiconductors to align multiple industries to provide the complex capabilities to continue increasing the density of integrated circuits to nanometre scales. Since the 1960s, lithography has become increasingly complex with the evolution from contact printers, to steppers, pattern reduction technology at i-line, 248 nm and 193 nm wavelengths, which required dramatic improvements of mask-making technology, photolithography printing and alignment capabilities and photoresist capabilities. At the same time, pattern transfer has evolved from wet etching of features, to plasma etch and more complex etching capabilities to fabricate features that are currently 32 nm in high-volume production. To continue increasing the density of devices and interconnects, new pattern transfer technologies will be needed with options for the future including extreme ultraviolet lithography, imprint technology and directed self-assembly. While complementary metal oxide semiconductors will continue to be extended for many years, these advanced pattern transfer technologies may enable development of novel memory and logic technologies based on different physical phenomena in the future to enhance and extend information processing.

Linking open vocabularies

CERN Document Server

Greifender, Elke; Seadle, Michael

2013-01-01

Linked Data (LD), Linked Open Data (LOD) and generating a web of data, present the new knowledge sharing frontier. In a philosophical context, LD is an evolving environment that reflects humankinds' desire to understand the world by drawing on the latest technologies and capabilities of the time. LD, while seemingly a new phenomenon did not emerge overnight; rather it represents the natural progression by which knowledge structures are developed, used, and shared. Linked Open Vocabularies is a significant trajectory of LD. Linked Open Vocabularies targets vocabularies that have traditionally b

Virtual Laboratory Enabling Collaborative Research in Applied Vehicle Technologies

Science.gov (United States)

Lamar, John E.; Cronin, Catherine K.; Scott, Laura E.

2005-01-01

The virtual laboratory is a new technology, based on the internet, that has had wide usage in a variety of technical fields because of its inherent ability to allow many users to participate simultaneously in instruction (education) or in the collaborative study of a common problem (real-world application). The leadership in the Applied Vehicle Technology panel has encouraged the utilization of this technology in its task groups for some time and its parent organization, the Research and Technology Agency, has done the same for its own administrative use. This paper outlines the application of the virtual laboratory to those fields important to applied vehicle technologies, gives the status of the effort, and identifies the benefit it can have on collaborative research. The latter is done, in part, through a specific example, i.e. the experience of one task group.

The Advanced Linked Extended Reconnaissance & Targeting Technology Demonstration project

Science.gov (United States)

Edwards, Mark

2008-04-01

The Advanced Linked Extended Reconnaissance & Targeting (ALERT) Technology Demonstration (TD) project is addressing many operational needs of the future Canadian Army's Surveillance and Reconnaissance forces. Using the surveillance system of the Coyote reconnaissance vehicle as an experimental platform, the ALERT TD project aims to significantly enhance situational awareness by fusing multi-sensor and tactical data, developing automated processes, and integrating beyond line-of-sight sensing. The project is exploiting important advances made in computer processing capability, displays technology, digital communications, and sensor technology since the design of the original surveillance system. As the major research area within the project, concepts are discussed for displaying and fusing multi-sensor and tactical data within an Enhanced Operator Control Station (EOCS). The sensor data can originate from the Coyote's own visible-band and IR cameras, laser rangefinder, and ground-surveillance radar, as well as from beyond line-of-sight systems such as mini-UAVs and unattended ground sensors. Video-rate image processing has been developed to assist the operator to detect poorly visible targets. As a second major area of research, automatic target cueing capabilities have been added to the system. These include scene change detection, automatic target detection and aided target recognition algorithms processing both IR and visible-band images to draw the operator's attention to possible targets. The merits of incorporating scene change detection algorithms are also discussed. In the area of multi-sensor data fusion, up to Joint Defence Labs level 2 has been demonstrated. The human factors engineering aspects of the user interface in this complex environment are presented, drawing upon multiple user group sessions with military surveillance system operators. The paper concludes with Lessons Learned from the project. The ALERT system has been used in a number of C4ISR

A qualitative study of the challenges related to the development of product enabled services in technology driven start-ups

OpenAIRE

Pedersen, Søren; Tanev, Stoyan; Ma, Zheng; Lin, Chih-Cheng

2012-01-01

Product-enabled service development has been identified as one of the potential sources for sustainable growth and competitiveness of firms in advanced economies. Many firms are in the process of shifting their focus from offering standalone products or services towards integrated offerings of products and services to meet specific customer demands, thus generating additional value. This paper examines technology-based start-ups’ attitude towards the development of hybrid offerings as part of...

Dupont Analysis of An Information Technology Enabled Competitive Advantage

OpenAIRE

Nustini, Yuni

2009-01-01

The transformation of business caused by e-business and e-commerce applications of the internet and related technologies demonstrates that information systems and information technologies are essential ingredients for business survival and success. The most often cited benefit of IT are integrating business process, increasing efficiency, sales, productivity, and competitiveness. This study is designed for determining where managers considering investment in information technology (IT) projec...

Dupont Analysis of an Information Technology Enabled Competitive Advantage

OpenAIRE

Nustini, Yuni

2003-01-01

The transformation of business caused by e-business and e-commerce applications of the internet and related technologies demonstrates that information systems and information technologies are essential ingredients for business survival and success. The most often cited benefit of IT are integrating business process, increasing efficiency, sales, productivity, and competitiveness. This study is designed for determining where managers considering investment in information technology (IT) projec...

Enabling inspection solutions for future mask technologies through the development of massively parallel E-Beam inspection

Science.gov (United States)

Malloy, Matt; Thiel, Brad; Bunday, Benjamin D.; Wurm, Stefan; Jindal, Vibhu; Mukhtar, Maseeh; Quoi, Kathy; Kemen, Thomas; Zeidler, Dirk; Eberle, Anna Lena; Garbowski, Tomasz; Dellemann, Gregor; Peters, Jan Hendrik

2015-09-01

The new device architectures and materials being introduced for sub-10nm manufacturing, combined with the complexity of multiple patterning and the need for improved hotspot detection strategies, have pushed current wafer inspection technologies to their limits. In parallel, gaps in mask inspection capability are growing as new generations of mask technologies are developed to support these sub-10nm wafer manufacturing requirements. In particular, the challenges associated with nanoimprint and extreme ultraviolet (EUV) mask inspection require new strategies that enable fast inspection at high sensitivity. The tradeoffs between sensitivity and throughput for optical and e-beam inspection are well understood. Optical inspection offers the highest throughput and is the current workhorse of the industry for both wafer and mask inspection. E-beam inspection offers the highest sensitivity but has historically lacked the throughput required for widespread adoption in the manufacturing environment. It is unlikely that continued incremental improvements to either technology will meet tomorrow's requirements, and therefore a new inspection technology approach is required; one that combines the high-throughput performance of optical with the high-sensitivity capabilities of e-beam inspection. To support the industry in meeting these challenges SUNY Poly SEMATECH has evaluated disruptive technologies that can meet the requirements for high volume manufacturing (HVM), for both the wafer fab [1] and the mask shop. Highspeed massively parallel e-beam defect inspection has been identified as the leading candidate for addressing the key gaps limiting today's patterned defect inspection techniques. As of late 2014 SUNY Poly SEMATECH completed a review, system analysis, and proof of concept evaluation of multiple e-beam technologies for defect inspection. A champion approach has been identified based on a multibeam technology from Carl Zeiss. This paper includes a discussion on the

Enabling Remote Activity: Using mobile technology for remote participation in geoscience fieldwork

Science.gov (United States)

Davies, Sarah; Collins, Trevor; Gaved, Mark; Bartlett, Jessica; Valentine, Chris; McCann, Lewis

2010-05-01

Field-based activities are regarded as essential to the development of a range of professional and personal skills within the geosciences. Students enjoy field activities, preferring these to learning with simulations (Spicer and Stratford 2001), and these improve deeper learning and understanding (Kern and Carpenter, 1984; Elkins and Elkins, 2007). However, some students find it difficult to access these field-based learning opportunities. Field sites may be remote and often require travel across uneven, challenging or potentially dangerous terrain. Mobility-impaired students are particularly limited in their opportunities to participate in field-based learning activities and, as higher education institutions have a responsibility to provide inclusive opportunities for students (UK Disability Discrimination Act 1995, UK Special Education Needs and Disability Rights Act 2001), the need for inclusive fieldwork learning is being increasingly recognised. The Enabling Remote Activity (ERA) project has been investigating how mobile communications technologies might allow field learning experiences to be brought to students who would otherwise find it difficult to participate, and also to enhance activities for all participants. It uses a rapidly deployable, battery-powered wireless network to transmit video, audio, and high resolution still images to connect participants at an accessible location with participants in the field. Crucially, the system uses a transient wireless network, allowing multiple locations to be explored during a field visit, and for plans to be changed dynamically if required. Central to the concept is the requirement for independent investigative learning: students are enabled to participate actively in the learning experience and to direct the investigations, as opposed to being simply remote viewers of the experience. Two ways of using the ERA system have been investigated: remote access and collaborative groupwork. In 2006 and 2008 remote

Linked data management

CERN Document Server

Hose, Katja; Schenkel, Ralf

2014-01-01

Linked Data Management presents techniques for querying and managing Linked Data that is available on today’s Web. The book shows how the abundance of Linked Data can serve as fertile ground for research and commercial applications. The text focuses on aspects of managing large-scale collections of Linked Data. It offers a detailed introduction to Linked Data and related standards, including the main principles distinguishing Linked Data from standard database technology. Chapters also describe how to generate links between datasets and explain the overall architecture of data integration systems based on Linked Data. A large part of the text is devoted to query processing in different setups. After presenting methods to publish relational data as Linked Data and efficient centralized processing, the book explores lookup-based, distributed, and parallel solutions. It then addresses advanced topics, such as reasoning, and discusses work related to read-write Linked Data for system interoperation. Desp...

Enabling Wind Power Nationwide

Energy Technology Data Exchange (ETDEWEB)

Jose Zayas, Michael Derby, Patrick Gilman and Shreyas Ananthan,

2015-05-01

Leveraging this experience, the U.S. Department of Energy’s (DOE’s) Wind and Water Power Technologies Office has evaluated the potential for wind power to generate electricity in all 50 states. This report analyzes and quantifies the geographic expansion that could be enabled by accessing higher above ground heights for wind turbines and considers the means by which this new potential could be responsibly developed.

Smart Grid enabled heat pumps

DEFF Research Database (Denmark)

Carmo, Carolina; Detlefsen, Nina; Nielsen, Mads Pagh

2014-01-01

The transition towards a 100 % fossil-free energy system, while achieving extreme penetration levels of intermittent wind and solar power in electricity generation, requires demand-side technologies that are smart (intermittency-friendly) and efficient. The integration of Smart Grid enabling...... with an empirical study in order to achieve a number of recommendations with respect to technology concepts and control strategies that would allow residential vapor-compression heat pumps to support large-scale integration of intermittent renewables. The analysis is based on data gathered over a period of up to 3...

Materializing the web of linked data

CERN Document Server

Konstantinou, Nikolaos

2015-01-01

This book explains the Linked Data domain by adopting a bottom-up approach: it introduces the fundamental Semantic Web technologies and building blocks, which are then combined into methodologies and end-to-end examples for publishing datasets as Linked Data, and use cases that harness scholarly information and sensor data. It presents how Linked Data is used for web-scale data integration, information management and search. Special emphasis is given to the publication of Linked Data from relational databases as well as from real-time sensor data streams. The authors also trace the transformation from the document-based World Wide Web into a Web of Data. Materializing the Web of Linked Data is addressed to researchers and professionals studying software technologies, tools and approaches that drive the Linked Data ecosystem, and the Web in general.

Let's "Downscale" Linked Data

NARCIS (Netherlands)

Gueret, C.D.M.; de Boer, V.; Schlobach, K.S.

2014-01-01

Open data policies and linked data publication are powerful tools for increasing transparency, participatory governance, and accountability. The linked data community proudly emphasizes the economic and societal impact such technology shows. But a closer look proves that the design and deployment of

Let's "Downscale" Linked Data

NARCIS (Netherlands)

Gueret, Christophe; de Boer, Victor; Schlobach, Stefan

2014-01-01

Open data policies and linked data publication are powerful tools for increasing transparency, participatory governance, and accountability. A closer look at linked data technologies, however, proves that their design and deployment exclude the majority of the world’s population. It will take small

Disbiome database: linking the microbiome to disease.

Science.gov (United States)

Janssens, Yorick; Nielandt, Joachim; Bronselaer, Antoon; Debunne, Nathan; Verbeke, Frederick; Wynendaele, Evelien; Van Immerseel, Filip; Vandewynckel, Yves-Paul; De Tré, Guy; De Spiegeleer, Bart

2018-06-04

Recent research has provided fascinating indications and evidence that the host health is linked to its microbial inhabitants. Due to the development of high-throughput sequencing technologies, more and more data covering microbial composition changes in different disease types are emerging. However, this information is dispersed over a wide variety of medical and biomedical disciplines. Disbiome is a database which collects and presents published microbiota-disease information in a standardized way. The diseases are classified using the MedDRA classification system and the micro-organisms are linked to their NCBI and SILVA taxonomy. Finally, each study included in the Disbiome database is assessed for its reporting quality using a standardized questionnaire. Disbiome is the first database giving a clear, concise and up-to-date overview of microbial composition differences in diseases, together with the relevant information of the studies published. The strength of this database lies within the combination of the presence of references to other databases, which enables both specific and diverse search strategies within the Disbiome database, and the human annotation which ensures a simple and structured presentation of the available data.

The use of science and technology to enable localisation

CSIR Research Space (South Africa)

Bhugwandin, A

2015-10-01

Full Text Available South Africa’s state-owned companies are planning to invest significantly in infrastructure over the next decade. This investment in infrastructure is linked to the Competitive Supplier Development Plan of the Department of Public Enterprises...

Current status and future prospects for enabling chemistry technology in the drug discovery process [version 1; referees: 2 approved

Directory of Open Access Journals (Sweden)

Stevan W. Djuric

2016-09-01

Full Text Available This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities.

Disabling and Enabling Technologies for Learning in Higher Education for All: Issues and Challenges for Whom?

Directory of Open Access Journals (Sweden)

Sangeeta Bagga-Gupta

2016-10-01

Full Text Available Integration, inclusion, and equity constitute fundamental dimensions of democracy in post-World War II societies and their institutions. The study presented here reports upon the ways in which individuals and institutions both use and account for the roles that technologies, including ICT, play in disabling and enabling access for learning in higher education for all. Technological innovations during the 20th and 21st centuries, including ICT, have been heralded as holding significant promise for revolutionizing issues of access in societal institutions like schools, healthcare services, etc. (at least in the global North. Taking a socially oriented perspective, the study presented in this paper focuses on an ethnographically framed analysis of two datasets that critically explores the role that technologies, including ICT, play in higher education for individuals who are “differently abled” and who constitute a variation on a continuum of capabilities. Functionality as a dimension of everyday life in higher education in the 21st century is explored through the analysis of (i case studies of two “differently abled” students in Sweden and (ii current support services at universities in Sweden. The findings make visible the work that institutions and their members do through analyses of the organization of time and space and the use of technologies in institutional settings against the backdrop of individuals’ accountings and life trajectories. This study also highlights the relevance of multi-scale data analyses for revisiting the ways in which identity positions become framed or understood within higher education.

Report on the Enabling Technology Programme Optomechatronics

NARCIS (Netherlands)

Sadeghian Marnani, H.; Nulkes-de Groot, N.

2014-01-01

The last four years the research Programme Optomechatronics focused on the development of new key technologies for manufacturing and testing equipment and scientific instrumentation. The challenge is to develop instruments with higher accuracy, less costs and higher throughput than we can achieve

Enabling Logistics With Portable and Wireless Technology Study. Volume 1

Science.gov (United States)

2004-08-06

Players41 Tag Vendors Reader Vendors Software Players Early Adopters Alien Technology Corporation Intermec Technologies Corp. Descartes Systems...e at pa ion rt s s /st be an co d m ar e ds s rene l availability of interopera le s e demands of EPC isc ot a bro f a er b labl as te is, c...Intermec Technologies Corp. Descartes Systems Boeing Intermec Technologies Corp. Matrics Inc. EXE Technologies CHEP Matrics Inc. Psion Teklogix Inc

Review of Enabling Technologies to Facilitate Secure Compute Customization

Energy Technology Data Exchange (ETDEWEB)

Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pelfrey, Daniel S [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

2014-12-01

High performance computing environments are often used for a wide variety of workloads ranging from simulation, data transformation and analysis, and complex workflows to name just a few. These systems may process data for a variety of users, often requiring strong separation between job allocations. There are many challenges to establishing these secure enclaves within the shared infrastructure of high-performance computing (HPC) environments. The isolation mechanisms in the system software are the basic building blocks for enabling secure compute enclaves. There are a variety of approaches and the focus of this report is to review the different virtualization technologies that facilitate the creation of secure compute enclaves. The report reviews current operating system (OS) protection mechanisms and modern virtualization technologies to better understand the performance/isolation properties. We also examine the feasibility of running ``virtualized'' computing resources as non-privileged users, and providing controlled administrative permissions for standard users running within a virtualized context. Our examination includes technologies such as Linux containers (LXC [32], Docker [15]) and full virtualization (KVM [26], Xen [5]). We categorize these different approaches to virtualization into two broad groups: OS-level virtualization and system-level virtualization. The OS-level virtualization uses containers to allow a single OS kernel to be partitioned to create Virtual Environments (VE), e.g., LXC. The resources within the host's kernel are only virtualized in the sense of separate namespaces. In contrast, system-level virtualization uses hypervisors to manage multiple OS kernels and virtualize the physical resources (hardware) to create Virtual Machines (VM), e.g., Xen, KVM. This terminology of VE and VM, detailed in Section 2, is used throughout the report to distinguish between the two different approaches to providing virtualized execution

Emerging technologies for enabling proangiogenic therapy

International Nuclear Information System (INIS)

Roy, Rituparna Sinha; Roy, Bhaskar; Sengupta, Shiladitya

2011-01-01

Ischemic disease causes a large number of deaths and significant clinical problems worldwide. Therapeutic angiogenesis, strengthened by advances in growth-factor-based therapies, is a promising solution to ischemic pathologies. Major challenges in therapeutic angiogenesis are the lack of stability of native angiogenic proteins and also providing sustained delivery of biologically active proteins at the ischemic sites. This paper will discuss various protein engineering strategies to develop stabilized proangiogenic proteins and several biomaterial technologies used to amplify the angiogenic outcome by delivering biologically active growth factors in a sustained manner.

Emerging technologies for enabling proangiogenic therapy

Science.gov (United States)

Sinha Roy, Rituparna; Roy, Bhaskar; Sengupta, Shiladitya

2011-12-01

Ischemic disease causes a large number of deaths and significant clinical problems worldwide. Therapeutic angiogenesis, strengthened by advances in growth-factor-based therapies, is a promising solution to ischemic pathologies. Major challenges in therapeutic angiogenesis are the lack of stability of native angiogenic proteins and also providing sustained delivery of biologically active proteins at the ischemic sites. This paper will discuss various protein engineering strategies to develop stabilized proangiogenic proteins and several biomaterial technologies used to amplify the angiogenic outcome by delivering biologically active growth factors in a sustained manner.

New links between Ecuador and CERN

CERN Document Server

CERN Bulletin

2011-01-01

A new protocol recently signed in Quito opens the way to stronger links between the Ecuadorian scientific community and CERN. The operational framework provided by the protocol will enable scientists from Ecuador to take part in CERN’s projects, supported by the Ecuadorian authorities.   Picture taken during the signing ceremony at SENESCYT (Quito, Ecuador) on 12 July 2011. From left to right: Guillermo Solórzano, Minister for Coordination of Knowledge and Human Talent, Rene Ramirez Gallegos, National Secretary for Higher Education, Science and Technology - SENECYT, Felicitas Pauss and Jose Salicio from CERN. Ecuador’s involvement with CERN dates back to 1999 when a first International Co-operation Agreement was signed. However, despite these early beginnings,   only a few scientists from Ecuador, affiliated to non-Ecuadorian institutes, have since been directly involved in CERN’s projects, in particular the CMS experiment a...

Using Vision System Technologies to Enable Operational Improvements for Low Visibility Approach and Landing Operations

Science.gov (United States)

Kramer, Lynda J.; Ellis, Kyle K. E.; Bailey, Randall E.; Williams, Steven P.; Severance, Kurt; Le Vie, Lisa R.; Comstock, James R.

2014-01-01

Flight deck-based vision systems, such as Synthetic and Enhanced Vision System (SEVS) technologies, have the potential to provide additional margins of safety for aircrew performance and enable the implementation of operational improvements for low visibility surface, arrival, and departure operations in the terminal environment with equivalent efficiency to visual operations. To achieve this potential, research is required for effective technology development and implementation based upon human factors design and regulatory guidance. This research supports the introduction and use of Synthetic Vision Systems and Enhanced Flight Vision Systems (SVS/EFVS) as advanced cockpit vision technologies in Next Generation Air Transportation System (NextGen) operations. Twelve air transport-rated crews participated in a motion-base simulation experiment to evaluate the use of SVS/EFVS in NextGen low visibility approach and landing operations. Three monochromatic, collimated head-up display (HUD) concepts (conventional HUD, SVS HUD, and EFVS HUD) and two color head-down primary flight display (PFD) concepts (conventional PFD, SVS PFD) were evaluated in a simulated NextGen Chicago O'Hare terminal environment. Additionally, the instrument approach type (no offset, 3 degree offset, 15 degree offset) was experimentally varied to test the efficacy of the HUD concepts for offset approach operations. The data showed that touchdown landing performance were excellent regardless of SEVS concept or type of offset instrument approach being flown. Subjective assessments of mental workload and situation awareness indicated that making offset approaches in low visibility conditions with an EFVS HUD or SVS HUD may be feasible.

Some Recent Technology Developments From The Uk's National Nuclear Laboratory To Enable Hazard Characterisation For Nuclear Decommissioning Applications

International Nuclear Information System (INIS)

Farfan, E.; Foley, T.

2010-01-01

Under its programme of self investment Internal Research and Development (IR and D), the UK's National Nuclear Laboratory (NNL) is addressing the requirement for development in technology to enable hazard characterisation for nuclear decommissioning applications. Three such examples are described here: (1) RadBall developed by the NNL (patent pending) is a deployable baseball-sized radiation mapping device which can, from a single location, locate and quantify radiation hazards. RadBall offers a means to collect information regarding the magnitude and distribution of radiation in a given cell, glovebox or room to support the development of a safe, cost effective decontamination strategy. RadBall requires no electrical supplies and is relatively small, making it easy to be deployed and used to map radiation hazards in hard to reach areas. Recent work conducted in partnership with the Savannah River National Laboratory (SRNL) is presented. (2) HiRAD (patent pending) has been developed by the NNL in partnership with Tracerco Ltd (UK). HiRAD is a real-time, remotely deployed, radiation detection device designed to operate in elevated levels of radiation (i.e. thousands and tens of thousands of Gray) as seen in parts of the nuclear industry. Like the RadBall technology, the HiRAD system does not require any electrical components, the small dimensions and flexibility of the device allow it to be positioned in difficult to access areas (such as pipe work). HiRAD can be deployed as a single detector, a chain, or as an array giving the ability to monitor large process areas. Results during the development and deployment of the technology are presented. (3) Wireless Sensor Network is a NNL supported development project led by the University of Manchester (UK) in partnership with Oxford University (UK). The project is concerned with the development of wireless sensor network technology to enable the underwater deployment and communication of miniaturised probes allowing pond

Provision of enabling technology in professional sports.

Science.gov (United States)

McBride, D K

2000-06-01

Multiple-round golf tournaments are designed intentionally to separate individuals' scores as play proceeds. Variance analyses and consideration of individual differences (vs group mean effects) for a sample of professional events confirm that 3-, 4-, and 5-round tournaments show significantly increased variability (though stable means) from first to last rounds. It is argued here that the dispersion of scores increases as play proceeds because the more physically or mentally fit players emerge and continue to perform best. Furthermore, a marginal income analysis indicates that the average gain in earnings from a one-shot improvement in score is approximately $8,000. An interpretation based on fatigue, competition, and stress supports the Professional Golf Association's claim that provision of enabling devices, like a golf cart for disabled players, is also an enhancement and is thus unfair.

Enabling Problem Based Learning through Web 2.0 Technologies

DEFF Research Database (Denmark)

Tambouris, Efthimios; Panopoulou, Eleni; Tarabanis, Konstantinos

2012-01-01

of modern educational systems. Established pedagogical strategies, such as Problem Based Learning (PBL), are being adapted for online use in conjunction with modern Web 2.0 technologies and tools. However, even though Web 2.0 and progressive social-networking technologies are automatically associated......Advances in Information and Communications Technology (ICT), particularly the so-called Web 2.0, are affecting all aspects of our life: how we communicate, how we shop, how we socialise, and how we learn. Facilitating learning through the use of ICT, also known as eLearning, is a vital part...... with ideals such as collaboration, sharing, and active learning, it is also possible to use them in a very conservative, teacher-centred way limiting thus their impact. In this paper, we present a PBL 2.0 framework, i.e., a framework combining PBL practices with Web 2.0 technologies. More specifically, we (a...

Overcoming technology - obsolescence: a case study in Heavy Water Plant

International Nuclear Information System (INIS)

Gupta, O.P.; Sonde, R.R.; Wechalekar, A.K.

2002-01-01

Ammonia based Heavy Water Plants in India are set up essentially in conjunction with fertiliser plants for the supply of feed synthesis gas. Earlier ammonia was being produced in fertiliser plants using high-pressure technology which was highly energy intensive. However with fast developments in the field of production of ammonia, fertiliser plants are switching over to low pressure technology. Ammonia based heavy water plants have to operate on pressures corresponding to that of fertiliser plants. Due to low pressures in production of ammonia, heavy water plants would also be required to operate at low pressures than the existing operating pressures. This problem was faced at Heavy Water Plant at Baroda where GSFC supplying synthesis gas switched over to low pressure technology making it imperative on the part of Heavy Water Board to carry out modification to the main plant for continued operation of Heavy Water Plant, Baroda. Anticipating similar problems due to production of ammonia at lower pressures in other fertiliser plants linked to existing Heavy Water Plants, it became necessary for HWB to develop water ammonia front end. The feed in such a case would be water instead of synthesis gas. This would enable HWB to dispense with dependence on fertiliser plants especially if grass-root ammonia based heavy water plants are to be set up. Incorporation of water ammonia front end would enable HWB to de link ammonia based heavy water plants with fertiliser plants. This paper discusses the advantage of de linking heavy water plant respective fertiliser plant by incorporating water ammonia front end and technical issues related to front end technology. A novel concept of ammonia absorption refrigeration (AAR) was considered for the process integration with the front end. The incorporation of AAR with water ammonia front-end configuration utilizes liquid ammonia refrigerant to generate refrigeration without additional energy input which otherwise would have been

The OceanLink Project

Science.gov (United States)

Narock, T.; Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Cheatham, M.; Finin, T.; Hitzler, P.; Krisnadhi, A.; Raymond, L. M.; Shepherd, A.; Wiebe, P. H.

2014-12-01

A wide spectrum of maturing methods and tools, collectively characterized as the Semantic Web, is helping to vastly improve the dissemination of scientific research. Creating semantic integration requires input from both domain and cyberinfrastructure scientists. OceanLink, an NSF EarthCube Building Block, is demonstrating semantic technologies through the integration of geoscience data repositories, library holdings, conference abstracts, and funded research awards. Meeting project objectives involves applying semantic technologies to support data representation, discovery, sharing and integration. Our semantic cyberinfrastructure components include ontology design patterns, Linked Data collections, semantic provenance, and associated services to enhance data and knowledge discovery, interoperation, and integration. We discuss how these components are integrated, the continued automated and semi-automated creation of semantic metadata, and techniques we have developed to integrate ontologies, link resources, and preserve provenance and attribution.

Baseline Assessment and Prioritization Framework for IVHM Integrity Assurance Enabling Capabilities

Science.gov (United States)

Cooper, Eric G.; DiVito, Benedetto L.; Jacklin, Stephen A.; Miner, Paul S.

2009-01-01

Fundamental to vehicle health management is the deployment of systems incorporating advanced technologies for predicting and detecting anomalous conditions in highly complex and integrated environments. Integrated structural integrity health monitoring, statistical algorithms for detection, estimation, prediction, and fusion, and diagnosis supporting adaptive control are examples of advanced technologies that present considerable verification and validation challenges. These systems necessitate interactions between physical and software-based systems that are highly networked with sensing and actuation subsystems, and incorporate technologies that are, in many respects, different from those employed in civil aviation today. A formidable barrier to deploying these advanced technologies in civil aviation is the lack of enabling verification and validation tools, methods, and technologies. The development of new verification and validation capabilities will not only enable the fielding of advanced vehicle health management systems, but will also provide new assurance capabilities for verification and validation of current generation aviation software which has been implicated in anomalous in-flight behavior. This paper describes the research focused on enabling capabilities for verification and validation underway within NASA s Integrated Vehicle Health Management project, discusses the state of the art of these capabilities, and includes a framework for prioritizing activities.

The use of technology in customer relationship management (CRM

Directory of Open Access Journals (Sweden)

M. Viljoen

2005-12-01

Full Text Available Relationships have increased in importance in the field of business and marketing in the recent past. This importance can be linked to the changing nature of competition and technological developments. In this context, the question that has been posed is how these two factors affect the development of relationships. In the case of competition, relationships can serve as the basis for competitive advantage, while technology serves as the enabler of relationship building. The focus of this article is a theoretical discussion of the technological developments and their application in the CRM context in the implementation of CRM strategy. The article examines the nature of CRM and the components of the various technological CRM systems as well as the specific types of systems that can be used in relationship building, concluding with a discussion of specific technological tools in the CRM context.

DrumNet : Building a GSM-enabled Information System for ...

International Development Research Centre (IDRC) Digital Library (Canada)

Gradual penetration of mobile telephony into rural Kenya offered a timely alternative. ... During Phase II, researchers will design and implement a global system for mobile communications (GSM)-enabled system that provides interactive links ... By cell phone, scientists assist African farmers facing effects of climate change ...

Factors Enabling the Use of Technology in Subject Teaching

Science.gov (United States)

Cubukcuoglu, Begum

2013-01-01

The importance of information and communication technologies in the teaching and learning process has been proven by many research studies to be an effective way of supporting teaching and learning. Although many teachers do not use new technologies as instructional tools, some are integrating information and communication technologies…

Comparison of 850-nm and 1550-nm VCSELs for low-cost short-reach IM/DD and OFDM SMF/MMF links

DEFF Research Database (Denmark)

Karinou, Fotini; Deng, Lei; Rodes Lopez, Roberto

2013-01-01

In this paper, we experimentally compare the suitability of two VCSEL designs of different wavelength and technology as inexpensive, off-the-shelf transmitter components to enable low-cost and energy-efficient optical interconnects employing conventional (NRZ IM/DD) and advanced (OFDM) modulation....... In particular, we assess the performance of a multimode (MM) 850-nm and a single-mode (SM) 1550-nm VCSEL over 100 m/1 km of 50.7-μm diameter OM-4 MMF links and 100 m/5 km SMF links. OFDM-QPSK is investigated in order to substitute IM/DD in order to increase the capacity in the aforementioned VCSEL-based, MMF...

The CYGNSS flight segment; A major NASA science mission enabled by micro-satellite technology

Science.gov (United States)

Rose, R.; Ruf, C.; Rose, D.; Brummitt, M.; Ridley, A.

While hurricane track forecasts have improved in accuracy by ~50% since 1990, there has been essentially no improvement in the accuracy of intensity prediction. This lack of progress is thought to be caused by inadequate observations and modeling of the inner core due to two causes: 1) much of the inner core ocean surface is obscured from conventional remote sensing instruments by intense precipitation in the inner rain bands and 2) the rapidly evolving stages of the tropical cyclone (TC) life cycle are poorly sampled in time by conventional polar-orbiting, wide-swath surface wind imagers. NASA's most recently awarded Earth science mission, the NASA EV-2 Cyclone Global Navigation Satellite System (CYGNSS) has been designed to address these deficiencies by combining the all-weather performance of GNSS bistatic ocean surface scatterometry with the sampling properties of a satellite constellation. This paper provides an overview of the CYGNSS flight segment requirements, implementation, and concept of operations for the CYGNSS constellation; consisting of 8 microsatellite-class spacecraft (historical TC track. The CYGNSS mission is enabled by modern electronic technology; it is an example of how nanosatellite technology can be applied to replace traditional "old school" solutions at significantly reduced cost while providing an increase in performance. This paper provides an overview of how we combined a reliable space-flight proven avionics design with selected microsatellite components to create an innovative, low-cost solution for a mainstream science investigation.

ArrayWiki: an enabling technology for sharing public microarray data repositories and meta-analyses

Science.gov (United States)

Stokes, Todd H; Torrance, JT; Li, Henry; Wang, May D

2008-01-01

Background A survey of microarray databases reveals that most of the repository contents and data models are heterogeneous (i.e., data obtained from different chip manufacturers), and that the repositories provide only basic biological keywords linking to PubMed. As a result, it is difficult to find datasets using research context or analysis parameters information beyond a few keywords. For example, to reduce the "curse-of-dimension" problem in microarray analysis, the number of samples is often increased by merging array data from different datasets. Knowing chip data parameters such as pre-processing steps (e.g., normalization, artefact removal, etc), and knowing any previous biological validation of the dataset is essential due to the heterogeneity of the data. However, most of the microarray repositories do not have meta-data information in the first place, and do not have a a mechanism to add or insert this information. Thus, there is a critical need to create "intelligent" microarray repositories that (1) enable update of meta-data with the raw array data, and (2) provide standardized archiving protocols to minimize bias from the raw data sources. Results To address the problems discussed, we have developed a community maintained system called ArrayWiki that unites disparate meta-data of microarray meta-experiments from multiple primary sources with four key features. First, ArrayWiki provides a user-friendly knowledge management interface in addition to a programmable interface using standards developed by Wikipedia. Second, ArrayWiki includes automated quality control processes (caCORRECT) and novel visualization methods (BioPNG, Gel Plots), which provide extra information about data quality unavailable in other microarray repositories. Third, it provides a user-curation capability through the familiar Wiki interface. Fourth, ArrayWiki provides users with simple text-based searches across all experiment meta-data, and exposes data to search engine crawlers

Nordic Energy Technologies : Enabling a sustainable Nordic energy future

Energy Technology Data Exchange (ETDEWEB)

Vik, Amund; Smith, Benjamin

2009-10-15

A high current Nordic competence in energy technology and an increased need for funding and international cooperation in the field are the main messages of the report. This report summarizes results from 7 different research projects relating to policies for energy technology, funded by Nordic Energy Research for the period 2007-2008, and provides an analysis of the Nordic innovation systems in the energy sector. The Nordic countries possess a high level of competence in the field of renewable energy technologies. Of the total installed capacity comprises a large share of renewable energy, and Nordic technology companies play an important role in the international market. Especially distinguished wind energy, both in view of the installed power and a global technology sales. Public funding for energy research has experienced a significant decline since the oil crisis of the 1970s, although the figures in recent years has increased a bit. According to the IEA, it will require a significant increase in funding to reduce greenhouse gas emissions and limit further climate change. The third point highlighted in the report is the importance of international cooperation in energy research. Nordic and international cooperation is necessary in order to reduce duplication and create the synergy needed if we are to achieve our ambitious policy objectives in the climate and energy issue. (AG)

Enhancing Enterprise 2.0 Ecosystems Using Semantic Web and Linked Data Technologies:The SemSLATES Approach

Science.gov (United States)

Passant, Alexandre; Laublet, Philippe; Breslin, John G.; Decker, Stefan

During the past few years, various organisations embraced the Enterprise 2.0 paradigms, providing their employees with new means to enhance collaboration and knowledge sharing in the workplace. However, while tools such as blogs, wikis, and principles like free-tagging or content syndication allow user-generated content to be more easily created and shared in the enterprise, in spite of some social issues, these new practices lead to various problems in terms of knowledge management. In this chapter, we provide an approach based on Semantic Web and Linked Data technologies for (1) integrating heterogeneous data from distinct Enterprise 2.0 applications, and (2) bridging the gap between raw text and machine-readable Linked Data. We discuss the theoretical background of our proposal as well as a practical case-study in enterprise, focusing on the various add-ons that have been provided to the original information system, as well as presenting how public Linked Open Data from the Web can be used to enhance existing Enterprise 2.0 ecosystems.

Use of eHealth technologies to enable the implementation of musculoskeletal Models of Care: Evidence and practice.

Science.gov (United States)

Slater, Helen; Dear, Blake F; Merolli, Mark A; Li, Linda C; Briggs, Andrew M

2016-06-01

Musculoskeletal (MSK) conditions are the second leading cause of morbidity-related burden of disease globally. EHealth is a potentially critical factor that enables the implementation of accessible, sustainable and more integrated MSK models of care (MoCs). MoCs serve as a vehicle to drive evidence into policy and practice through changes at a health system, clinician and patient level. The use of eHealth to implement MoCs is intuitive, given the capacity to scale technologies to deliver system and economic efficiencies, to contribute to sustainability, to adapt to low-resource settings and to mitigate access and care disparities. We follow a practice-oriented approach to describing the 'what' and 'how' to harness eHealth in the implementation of MSK MoCs. We focus on the practical application of eHealth technologies across care settings to those MSK conditions contributing most substantially to the burden of disease, including osteoarthritis and inflammatory arthritis, skeletal fragility-associated conditions and persistent MSK pain. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

malERA: An updated research agenda for basic science and enabling technologies in malaria elimination and eradication

Science.gov (United States)

2017-01-01

Basic science holds enormous power for revealing the biological mechanisms of disease and, in turn, paving the way toward new, effective interventions. Recognizing this power, the 2011 Research Agenda for Malaria Eradication included key priorities in fundamental research that, if attained, could help accelerate progress toward disease elimination and eradication. The Malaria Eradication Research Agenda (malERA) Consultative Panel on Basic Science and Enabling Technologies reviewed the progress, continuing challenges, and major opportunities for future research. The recommendations come from a literature of published and unpublished materials and the deliberations of the malERA Refresh Consultative Panel. These areas span multiple aspects of the Plasmodium life cycle in both the human host and the Anopheles vector and include critical, unanswered questions about parasite transmission, human infection in the liver, asexual-stage biology, and malaria persistence. We believe an integrated approach encompassing human immunology, parasitology, and entomology, and harnessing new and emerging biomedical technologies offers the best path toward addressing these questions and, ultimately, lowering the worldwide burden of malaria. PMID:29190277

Directory Enabled Policy Based Networking; TOPICAL

International Nuclear Information System (INIS)

KELIIAA, CURTIS M.

2001-01-01

This report presents a discussion of directory-enabled policy-based networking with an emphasis on its role as the foundation for securely scalable enterprise networks. A directory service provides the object-oriented logical environment for interactive cyber-policy implementation. Cyber-policy implementation includes security, network management, operational process and quality of service policies. The leading network-technology vendors have invested in these technologies for secure universal connectivity that transverses Internet, extranet and intranet boundaries. Industry standards are established that provide the fundamental guidelines for directory deployment scalable to global networks. The integration of policy-based networking with directory-service technologies provides for intelligent management of the enterprise network environment as an end-to-end system of related clients, services and resources. This architecture allows logical policies to protect data, manage security and provision critical network services permitting a proactive defense-in-depth cyber-security posture. Enterprise networking imposes the consideration of supporting multiple computing platforms, sites and business-operation models. An industry-standards based approach combined with principled systems engineering in the deployment of these technologies allows these issues to be successfully addressed. This discussion is focused on a directory-based policy architecture for the heterogeneous enterprise network-computing environment and does not propose specific vendor solutions. This document is written to present practical design methodology and provide an understanding of the risks, complexities and most important, the benefits of directory-enabled policy-based networking

OWLS as platform technology in OPTOS satellite

Science.gov (United States)

Rivas Abalo, J.; Martínez Oter, J.; Arruego Rodríguez, I.; Martín-Ortega Rico, A.; de Mingo Martín, J. R.; Jiménez Martín, J. J.; Martín Vodopivec, B.; Rodríguez Bustabad, S.; Guerrero Padrón, H.

2017-12-01

The aim of this work is to show the Optical Wireless Link to intraSpacecraft Communications (OWLS) technology as a platform technology for space missions, and more specifically its use within the On-Board Communication system of OPTOS satellite. OWLS technology was proposed by Instituto Nacional de Técnica Aeroespacial (INTA) at the end of the 1990s and developed along 10 years through a number of ground demonstrations, technological developments and in-orbit experiments. Its main benefits are: mass reduction, flexibility, and simplification of the Assembly, Integration and Tests phases. The final step was to go from an experimental technology to a platform one. This step was carried out in the OPTOS satellite, which makes use of optical wireless links in a distributed network based on an OLWS implementation of the CAN bus. OPTOS is the first fully wireless satellite. It is based on the triple configuration (3U) of the popular Cubesat standard, and was completely built at INTA. It was conceived to procure a fast development, low cost, and yet reliable platform to the Spanish scientific community, acting as a test bed for space born science and technology. OPTOS presents a distributed OBDH architecture in which all satellite's subsystems and payloads incorporate a small Distributed On-Board Computer (OBC) Terminal (DOT). All DOTs (7 in total) communicate between them by means of the OWLS-CAN that enables full data sharing capabilities. This collaboration allows them to perform all tasks that would normally be carried out by a centralized On-Board Computer.

Challenges as enablers for high quality Linked Data: insights from the Semantic Publishing Challenge

Directory of Open Access Journals (Sweden)

Anastasia Dimou

2017-01-01

Full Text Available While most challenges organized so far in the Semantic Web domain are focused on comparing tools with respect to different criteria such as their features and competencies, or exploiting semantically enriched data, the Semantic Web Evaluation Challenges series, co-located with the ESWC Semantic Web Conference, aims to compare them based on their output, namely the produced dataset. The Semantic Publishing Challenge is one of these challenges. Its goal is to involve participants in extracting data from heterogeneous sources on scholarly publications, and producing Linked Data that can be exploited by the community itself. This paper reviews lessons learned from both (i the overall organization of the Semantic Publishing Challenge, regarding the definition of the tasks, building the input dataset and forming the evaluation, and (ii the results produced by the participants, regarding the proposed approaches, the used tools, the preferred vocabularies and the results produced in the three editions of 2014, 2015 and 2016. We compared these lessons to other Semantic Web Evaluation Challenges. In this paper, we (i distill best practices for organizing such challenges that could be applied to similar events, and (ii report observations on Linked Data publishing derived from the submitted solutions. We conclude that higher quality may be achieved when Linked Data is produced as a result of a challenge, because the competition becomes an incentive, while solutions become better with respect to Linked Data publishing best practices when they are evaluated against the rules of the  challenge.

LinkED: A Novel Methodology for Publishing Linked Enterprise Data

Directory of Open Access Journals (Sweden)

Shreyas Suresh Rao

2017-01-01

Full Text Available Semantic Web technologies have redefined and strengthened the Enterprise-Web interoperability over the last decade. Linked Open Data (LOD refers to a set of best practices that empower enterprises to publish and interlink their data using existing ontologies on the World Wide Web. Current research in LOD focuses on expert search, the creation of unified information space and augmentation of core data from an enterprise context. However, existing approaches for publication of enterprise data as LOD are domain-specific, ad-hoc and suffer from lack of uniform representation across domains. The paper proposes a novel methodology called LinkED that contributes towards LOD literature in two ways: (a streamlines the publishing process through five stages of cleaning, triplification, interlinking, storage and visualization; (b addresses the latest challenges in LOD publication, namely: inadequate links, inconsistencies in the quality of the dataset and replicability of the LOD publication process. Further, the methodology is demonstrated via the publication of digital repository data as LOD in a university setting, which is evaluated based on two semantic standards: Five-Star model and data quality metrics. Overall, the paper provides a generic LOD publication process that is applicable across various domains such as healthcare, e-governance, banking, and tourism, to name a few.

Health-Enabled Smart Sensor Fusion Technology, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — It has been proven that the combination of smart sensors with embedded metadata and wireless technologies present real opportunities for significant improvements in...

How do digital platforms for ideas, technologies, and knowledge transfer act as enablers for digital transformation?

DEFF Research Database (Denmark)

Hossain, Mokter; Lassen, Astrid Heidemann

2017-01-01

Digital platforms, along with their supporting tools and features, have emerged as important enablers for firms to leverage distributed knowledge (Sedera et al., 2016), because they offer new ways for organizations to collaborate with the external environment for ideas, technologies, and knowledge...... for research and development (R&D), idea generation, prediction, freelance work, peer production, co-creation, product design, and public engagement, to name but a few. For example, Dell’s IdeaStorm (Hossain & Islam, 2015a) and Starbucks’ MyStarbucksIdea (Hossain & Islam, 2015b) are two digital crowdsourcing...... platforms that are used to engage crowds to solicit ideas from them (Bayus, 2013; Chua & Banerjee, 2013). Moreover, intermediary platforms, such as InnoCentive and IdeaConnection, are organizing online competitions to solve the problems of various organizations (Hossain, 2012). Although digital platforms...

Evolution of Cloud Computing and Enabling Technologies

OpenAIRE

Rabi Prasad Padhy; Manas Ranjan Patra

2012-01-01

We present an overview of the history of forecasting software over the past 25 years, concentrating especially on the interaction between computing and technologies from mainframe computing to cloud computing. The cloud computing is latest one. For delivering the vision of  various  of computing models, this paper lightly explains the architecture, characteristics, advantages, applications and issues of various computing models like PC computing, internet computing etc and related technologie...

Enabling science and technology for marine renewable energy

International Nuclear Information System (INIS)

Mueller, Markus; Wallace, Robin

2008-01-01

This paper describes some of the key challenges to be met in the development of marine renewable energy technology, from its present prototype form to being a widely deployed contributor to future energy supply. Since 2000, a number of large-scale wave and tidal current prototypes have been demonstrated around the world, but marine renewable energy technology is still 10-15 years behind that of wind energy. UK-based developers are leading the way, with Pelamis from Pelamis Wave Power demonstrated in the open sea, generating electricity into the UK network and securing orders from Portugal. However, having started later, the developing technology can make use of more advanced science and engineering, and it is therefore reasonable to expect rapid progress. Although progress is underway through deployment and testing, there are still key scientific challenges to be addressed in areas including resource assessment and predictability, engineering design and manufacturability, installation, operation and maintenance, survivability, reliability and cost reduction. The research priorities required to meet these challenges are suggested in this paper and have been drawn from current roadmaps and vision documents, including more recent consultations within the community by the UK Energy Research Centre Marine Research Network. Many scientific advances are required to meet these challenges, and their likelihood is explored based on current and future capabilities

Multi-target electrochemical biosensing enabled by integrated CMOS electronics

International Nuclear Information System (INIS)

Rothe, J; Lewandowska, M K; Heer, F; Frey, O; Hierlemann, A

2011-01-01

An integrated electrochemical measurement system, based on CMOS technology, is presented, which allows the detection of several analytes in parallel (multi-analyte) and enables simultaneous monitoring at different locations (multi-site). The system comprises a 576-electrode CMOS sensor chip, an FPGA module for chip control and data processing, and the measurement laptop. The advantages of the highly versatile system are demonstrated by two applications. First, a label-free, hybridization-based DNA sensor is enabled by the possibility of large-scale integration in CMOS technology. Second, the detection of the neurotransmitter choline is presented by assembling the chip with biosensor microprobe arrays. The low noise level enables a limit of detection of, e.g., 0.3 µM choline. The fully integrated system is self-contained: it features cleaning, functionalization and measurement functions without the need for additional electrical equipment. With the power supplied by the laptop, the system is very suitable for on-site measurements

SENSE IT: Student Enabled Network of Sensors for the Environment using Innovative Technology

Science.gov (United States)

Hotaling, L. A.; Stolkin, R.; Kirkey, W.; Bonner, J. S.; Lowes, S.; Lin, P.; Ojo, T.

2010-12-01

SENSE IT is a project funded by the National Science Foundation (NSF) which strives to enrich science, technology, engineering and mathematics (STEM) education by providing teacher professional development and classroom projects in which high school students build from first principles, program, test and deploy sensors for water quality monitoring. Sensor development is a broad and interdisciplinary area, providing motivating scenarios in which to teach a multitude of STEM subjects, from mathematics and physics to biology and environmental science, while engaging students with hands on problems that reinforce conventional classroom learning by re-presenting theory as practical tools for building real-life working devices. The SENSE IT program is currently developing and implementing a set of high school educational modules which teach environmental science and basic engineering through the lens of fundamental STEM principles, at the same time introducing students to a new set of technologies that are increasingly important in the world of environmental research. Specifically, the project provides students with the opportunity to learn the engineering design process through the design, construction, programming and testing of a student-implemented water monitoring network in the Hudson and St. Lawrence Rivers in New York. These educational modules are aligned to state and national technology and science content standards and are designed to be compatible with standard classroom curricula to support a variety of core science, technology and mathematics classroom material. For example, while designing, programming and calibrating the sensors, the students are led through a series of tasks in which they must use core mathematics and physics theory to solve the real problems of making their sensors work. In later modules, students can explore environmental science and environmental engineering curricula while deploying and monitoring their sensors in local rivers. This

Enabling physical teaching and learning environment for South African public schools

CSIR Research Space (South Africa)

Motsatsi, L

2012-04-01

Full Text Available This presentation investigates the typology of learning environments that enable effective school teaching and learning. According to the National Education Policy Act (27/1996),research show that there is a direct link between the physical...

Technology Enabling Ultra High Concentration Multi-Junction Cells. Final report

Energy Technology Data Exchange (ETDEWEB)

Bedair, S. M.; Colter, Peter

2016-03-30

The project goal is to enable multijunction cells to operate at greater than 2000× suns intensity with efficiency above forty percent. To achieve this goal the recipients have developed a robust high-bandgap tunnel junction, reduce series resistance, and integrated a practical heat dissipation scheme.

Applications of organic and printed electronics : a technology-enabled revolution

NARCIS (Netherlands)

Cantatore, E.

2013-01-01

Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain. The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize

Advanced Manufacturing Technologies

Science.gov (United States)

Fikes, John

2016-01-01

Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

Pharmacy on demand: New technologies to enable miniaturized and mobile drug manufacturing.

Science.gov (United States)

Lewin, John J; Choi, Eugene J; Ling, Geoffrey

2016-01-15

Developmental pharmaceutical manufacturing systems and techniques designed to overcome the shortcomings of traditional batch processing methods are described. Conventional pharmaceutical manufacturing processes do not adequately address the needs of military and civilian patient populations and healthcare providers. Recent advances within the Defense Advanced Research Projects Agency (DARPA) Battlefield Medicine program suggest that miniaturized, flexible platforms for end-to-end manufacturing of pharmaceuticals are possible. Advances in continuous-flow synthesis, chemistry, biological engineering, and downstream processing, coupled with online analytics, automation, and enhanced process control measures, pave the way for disruptive innovation to improve the pharmaceutical supply chain and drug manufacturing base. These new technologies, along with current and ongoing advances in regulatory science, have the future potential to (1) permit "on demand" drug manufacturing on the battlefield and in other austere environments, (2) enhance the level of preparedness for chemical, biological, radiological, and nuclear threats, (3) enhance health authorities' ability to respond to natural disasters and other catastrophic events, (4) minimize shortages of drugs, (5) address gaps in the orphan drug market, (6) support and enable the continued drive toward precision medicine, and (7) enhance access to needed medications in underserved areas across the globe. Modular platforms under development by DARPA's Battlefield Medicine program may one day improve the safety, efficiency, and timeliness of drug manufacturing. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Testing the Technology Acceptance Model: HIV case managers' intention to use a continuity of care record with context-specific links.

Science.gov (United States)

Schnall, Rebecca; Bakken, Suzanne

2011-09-01

To assess the applicability of the Technology Acceptance Model (TAM) constructs in explaining HIV case managers' behavioural intention to use a continuity of care record (CCR) with context-specific links designed to meet their information needs. Data were collected from 94 case managers who provide care to persons living with HIV (PLWH) using an online survey comprising three components: (1) demographic information: age, gender, ethnicity, race, Internet usage and computer experience; (2) mock-up of CCR with context-specific links; and items related to TAM constructs. Data analysis included: principal components factor analysis (PCA), assessment of internal consistency reliability and univariate and multivariate analysis. PCA extracted three factors (Perceived Ease of Use, Perceived Usefulness and Perceived Barriers to Use), explained variance = 84.9%, Cronbach's ά = 0.69-0.91. In a linear regression model, Perceived Ease of Use, Perceived Usefulness and Perceived Barriers to Use explained 43.6% (p Technology assessed.

Science for Energy Technology: Strengthening the Link Between Basic Research and Industry

Energy Technology Data Exchange (ETDEWEB)

None

2010-04-01

The nation faces two severe challenges that will determine our prosperity for decades to come: assuring clean, secure, and sustainable energy to power our world, and establishing a new foundation for enduring economic and jobs growth. These challenges are linked: the global demand for clean sustainable energy is an unprecedented economic opportunity for creating jobs and exporting energy technology to the developing and developed world. But achieving the tremendous potential of clean energy technology is not easy. In contrast to traditional fossil fuel-based technologies, clean energy technologies are in their infancy, operating far below their potential, with many scientific and technological challenges to overcome. Industry is ultimately the agent for commercializing clean energy technology and for reestablishing the foundation for our economic and jobs growth. For industry to succeed in these challenges, it must overcome many roadblocks and continuously innovate new generations of renewable, sustainable, and low-carbon energy technologies such as solar energy, carbon sequestration, nuclear energy, electricity delivery and efficiency, solid state lighting, batteries and biofuels. The roadblocks to higher performing clean energy technology are not just challenges of engineering design but are also limited by scientific understanding.Innovation relies on contributions from basic research to bridge major gaps in our understanding of the phenomena that limit efficiency, performance, or lifetime of the materials or chemistries of these sustainable energy technologies. Thus, efforts aimed at understanding the scientific issues behind performance limitations can have a real and immediate impact on cost, reliability, and performance of technology, and ultimately a transformative impact on our economy. With its broad research base and unique scientific user facilities, the DOE Office of Basic Energy Sciences (BES) is ideally positioned to address these needs. BES has laid

Integration of public procurement data using linked data

OpenAIRE

Jindrich Mynarz

2014-01-01

Linked data is frequently casted as a technology for performing integration of distributed datasets on the Web. In this paper, we propose a generic workflow for data integration based on linked data and semantic web technologies. The workflow comes out of an analysis of the application of linked data to integration of public procurement data. It organizes common data integration tasks, including schema alignment, data translation, entity reconciliation, and data fusion, into a sequence of rep...

grlc Makes GitHub Taste Like Linked Data APIs

NARCIS (Netherlands)

Meroño-Peñuela, A.; Hoekstra, Rinke; Sack, H; Rizzo, G; Steinmetz, N; Mladenić, D; Auer, S; Lange, C

2016-01-01

Building Web APIs on top of SPARQL endpoints is becoming a common practice to enable universal access to the integration favorable dataspace of Linked Data. However, the Linked Data community cannot expect users to learn SPARQL to query this dataspace, and Web APIs are the most extended way of

grlc Makes GitHub Taste Like Linked Data APIs

NARCIS (Netherlands)

Meroño-Peñuela, A.; Hoekstra, R.

2016-01-01

Building Web APIs on top of SPARQL endpoints is becoming a common practice to enable universal access to the integration favorable dataspace of Linked Data. However, the Linked Data community cannot expect users to learn SPARQL to query this dataspace, and Web APIs are the most common way of

Nanotechnologv Enabled Biological and Chemical Sensors

Science.gov (United States)

Koehne, Jessica; Meyyappan, M.

2011-01-01

Nanotechnology is an enabling technology that will impact almost all economic sectors: one of the most important and with great potential is the health/medical sector. - Nanomaterials for drug delivery - Early warning sensors - Implantable devices - Artificial parts with improved characteristics Carbon nanotubes and nanofibers show promise for use in sensor development, electrodes and other biomedical applications.

LINK2009 Phase 1: Development of 2. generation fuel cell vehicles and hydrogen refueling station. Final report; LINK2009 fase 1: Udvikling af 2. gen. braendselscelle koeretoejer og brinttankstation. Slutrapport

Energy Technology Data Exchange (ETDEWEB)

2010-03-15

LINK2009 project was to develop 2nd gen. technologies fuel cell systems for vehicles and 350bar hydrogen refueling stations. Also the LINK2009 project were to ensure a continuously positioning of Denmark and the Scandinavian Region within hydrogen for transport and continue to attract international car manufacturers to conduct demonstration and later market introduction in the region. The LINK2009 project is divided in two phases where this first phase only deals with the development of the 2nd generation technologies, whereas the following phase 2 will include the demonstration hereof as well as additional research activities. This Report describes the results of the phase 1 that was commenced in summer 2008 and ended in late 2009. Phase 1 has resulted in the development of new 2nd generation fuel cell technology for use in a city car and a service vehicle. Stated targets for price and efficiency have been reached and the following demonstration in Phase 2 is to confirm reaching of life time targets. The efficiency of the fuel cell system for the city car has been measured to be 42-48% at a power delivery of respectively 10kW and 2kW, which is significantly above the target of >40%. System simplifications and selection of new components have enabled a 50% reduction in the kW price for the fuel cell system, including 700bar hydrogen storage, now totalling Euro 4.500/kW. This creates sufficient basis for conducting demonstration of the system in vehicles. 9 vehicles are planned to be demonstrated in the following phase 2. Additional 8 vehicles were put in operation in Copenhagen in November 2009. Phase 1 has conducted development of 2nd gen. hydrogen refuelling technology that has resulted in concepts for both 350bar and 700bar refuelling as well as a concept for onsite hydrogen production at refuelling stations. In separate projects the developed 350bar technology has been brought to use in a newly established hydrogen station in Copenhagen, and the hydrogen

Enabling renewable energy and energy efficiency technologies. Opportunities in Eastern Europe, Caucasus, Central Asia, Southern and Eastern Mediterranean

Energy Technology Data Exchange (ETDEWEB)

Barnsley, Ingrid; Blank, Amanda; Brown, Adam

2015-06-01

The increased deployment of renewable energy and energy efficiency technologies (RE&EET) in the South Eastern Mediterranean (SEMED) region and in the Early Transition Countries (ETC) could bring a host of benefits, including enhanced energy security, increased national revenues and environmental gains. A new IEA Insights paper considers policy options for supporting the deployment of RE&EET, as well as the surrounding factors that can enable – or indeed impede – the successful implementation of such support policies in both regions. Drawing on a wealth of IEA analyses and policy experiences globally, the paper: provides a summary of the energy profiles of the ETC and SEMED regions; highlights overarching, ''enabling'' factors that can help to set the necessary foundations for the successful implementation of policy to support RE&EET deployment; analyses policy options for both RE and EE, drawing on practical examples and highlighting indicative policies that correspond with varying levels of market maturity; and provides a checklist for assessing the level of supportiveness of national policy frameworks for RE&EET. The paper concludes by pointing to the significant potential for energy efficiency and renewable energy gains in both regions.

Digital technology to enable aging in place.

Science.gov (United States)

Kim, Kwang-Il; Gollamudi, Shreya S; Steinhubl, Steven

2017-02-01

Aging, both of individuals and populations, presents challenges and opportunities. The multitude of morbidities and disabilities that are a too common component of aging represent significant challenges to individuals, their families and to healthcare systems. Aging in place is the ability to safely and comfortably maintain an independent and high quality of life in one's own home and community and is a highly desirable goal of most individuals with the additional benefit of significantly impacting the impending enormous healthcare burden. In order to make this possible, new care models that take advantage of novel technologies for tracking important physiologic and safety parameters need to be developed and implemented. By thoughtfully doing so, it can be possible to seamlessly provide preventative interventions when and as needed, detect the earliest signs of aggravation of chronic conditions, or identify and respond to any emergency situations, such as falls or cardiac arrest. In contrast to current approaches, caring for elderly individuals in their homes based on a digital technology infrastructure could be effective and cost-saving. In this review, we provide an overview of the characteristics of potential digital solutions applicable to creative aging along with the existing evidence supporting their ability to improve care, increase quality of life, and substantially decrease the emotional and financial costs associated with aging. Copyright © 2016 Elsevier Inc. All rights reserved.

Fluctuation mechanisms in superconductors nanowire single-photon counters, enabled by effective top-down manufacturing

CERN Document Server

Bartolf, Holger

2016-01-01

Holger Bartolf discusses state-of-the-art detection concepts based on superconducting nanotechnology as well as sophisticated analytical formulæ that model dissipative fluctuation-phenomena in superconducting nanowire single-photon detectors. Such knowledge is desirable for the development of advanced devices which are designed to possess an intrinsic robustness against vortex-fluctuations and it provides the perspective for honorable fundamental science in condensed matter physics. Especially the nanowire detector allows for ultra-low noise detection of signals with single-photon sensitivity and GHz repetition rates. Such devices have a huge potential for future technological impact and might enable unique applications (e.g. high rate interplanetary deep-space data links from Mars to Earth). Contents Superconducting Single-Photon Detectors Nanotechnological Manufacturing; Scale: 10 Nanometer Berezinskii-Kosterlitz Thouless (BKT) Transition, Edge-Barrier, Phase Slips Target Groups Researchers and students of...

Dually cross-linked single network poly(acrylic acid) hydrogels with superior mechanical properties and water absorbency.

Science.gov (United States)

Zhong, Ming; Liu, Yi-Tao; Liu, Xiao-Ying; Shi, Fu-Kuan; Zhang, Li-Qin; Zhu, Mei-Fang; Xie, Xu-Ming

2016-06-28

Poly(acrylic acid) (PAA) hydrogels with superior mechanical properties, based on a single network structure with dual cross-linking, are prepared by one-pot free radical polymerization. The network structure of the PAA hydrogels is composed of dual cross-linking: a dynamic and reversible ionic cross-linking among the PAA chains enabled by Fe(3+) ions, and a sparse covalent cross-linking enabled by a covalent cross-linker (Bis). Under deformation, the covalently cross-linked PAA chains remain intact to maintain their original configuration, while the Fe(3+)-enabled ionic cross-linking among the PAA chains is broken to dissipate energy and then recombined. It is found that the mechanical properties of the PAA hydrogels are significantly influenced by the contents of covalent cross-linkers, Fe(3+) ions and water, which can be adjusted within a substantial range and thus broaden the applications of the hydrogels. Meanwhile, the PAA hydrogels have excellent recoverability based on the dynamic and reversible ionic cross-linking enabled by Fe(3+) ions. Moreover, the swelling capacity of the PAA hydrogels is as high as 1800 times in deionized water due to the synergistic effects of ionic and covalent cross-linkings. The combination of balanced mechanical properties, efficient recoverability, high swelling capacity and facile preparation provides a new method to obtain high-performance hydrogels.

Beyond 100 Gbit/s wireless connectivity enabled by THz photonics

DEFF Research Database (Denmark)

Yu, Xianbin; Jia, Shi; Pang, Xiaodan

2017-01-01

Beyond 100Gbit/s wireless connectivity is appreciated in many scenarios, such as big data wireless cloud, ultrafast wireless download, large volume data transfer, etc. In this paper, we will present our recent achievements on beyond 100Gbit/s ultrafast terahertz (THz) wireless links enabled by TH...... photonics....

Unlocking the potential of smart grid technologies with behavioral science

Directory of Open Access Journals (Sweden)

Nicole eSintov

2015-04-01

Full Text Available Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are key players in these systems, they tend to be overlooked. Behavioral science is therefore key to engaging end-users and maximizing the impact of smart grid technologies. In this paper, we highlight several ways in which behavioral science can be applied to better understand and engage customers in smart grid systems.

Architectural Techniques to Enable Reliable and Scalable Memory Systems

OpenAIRE

Nair, Prashant J.

2017-01-01

High capacity and scalable memory systems play a vital role in enabling our desktops, smartphones, and pervasive technologies like Internet of Things (IoT). Unfortunately, memory systems are becoming increasingly prone to faults. This is because we rely on technology scaling to improve memory density, and at small feature sizes, memory cells tend to break easily. Today, memory reliability is seen as the key impediment towards using high-density devices, adopting new technologies, and even bui...

Enabling Dedicated, Affordable Space Access Through Aggressive Technology Maturation

Science.gov (United States)

Jones, Jonathan E.; Kibbey, Timothy P.; Cobb, C. Brent; Harris, Lawanna L.

2014-01-01

A launch vehicle at the scale and price point which allows developers to take reasonable risks with high payoff propulsion and avionics hardware solutions does not exist today. Establishing this service provides a ride through the proverbial technology "valley of death" that lies between demonstration in laboratory and flight environments. NASA's NanoLaunch effort will provide the framework to mature both earth-to-orbit and on-orbit propulsion and avionics technologies while also providing affordable, dedicated access to low earth orbit for cubesat class payloads.

grlc Makes GitHub Taste Like Linked Data APIs

NARCIS (Netherlands)

Merono Penuela, A.; Hoekstra, R.J.

2016-01-01

Building Web APIs on top of SPARQL endpoints is becoming common practice. It enables universal access to the integration favorable data space of Linked Data. In the majority of use cases, users cannot be expected to learn SPARQL to query this data space. Web APIs are the most common way to enable

An Integrated Conceptual Framework for RFID Enabled Healthcare

Directory of Open Access Journals (Sweden)

Gaurav Gupta

2015-12-01

Full Text Available Radio frequency identification (RFID technology is a wireless communication technology that facilitates automatic identification and data capture without human intervention. Since 2000s, RFID applications in the health care industry are increasing.  RFID has brought many improvements in areas like patient care, patient safety, equipment tracking, resource utilization, processing time reduction and so on. On the other hand, often deployment of RFID is questioned on the issues like high capital investment, technological complexity, and privacy concerns. Exploration of existing literature indicates the presence of works on the topics like asset management, patient management, staff management, institutional advantages, and organizational issues. However, most of the works are focused on a particular issue. Still now, scholarly attempts to integrate all the facades of RFID-enabled healthcare are limited. In this paper, we propose a conceptual framework that represents the scope for implementation of this technology and the various dimensions of RFID-enabled healthcare and demonstrate them in detail. Also, we have discussed the critical issues that can prove to be potential barriers to its successful implementation and current approaches to resolving these. We also discuss some of the regulatory initiatives encouraging its adoption in the healthcare industry. Also, we have highlighted the future research opportunities in this domain.

Linking information technology in education

Directory of Open Access Journals (Sweden)

Humberto Jaime Pérez Gutierrez

2014-02-01

Full Text Available It is attempted in this paper, show a clear and concise point involved the new technologies of computer science in education, and how these affect the preparation of teachers, overcoming the wide and deep stretch that separates computer specialists teachers of any subject, learners and the interaction between them.

Case study: development of a SANDF tactical data link network enabling capability

CSIR Research Space (South Africa)

Smith, CJ

2011-11-01

Full Text Available stream_source_info Smith4_2011.pdf.txt stream_content_type text/plain stream_size 24788 Content-Encoding ISO-8859-1 stream_name Smith4_2011.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Case Study: Development of a...Commander/Operational Personnel Operational Doctrine/Processes C2 and Platform applications Application 1 Application 2 Application 3 Data Data Data Communications Infrastructure DataData DataData Figure 1. TDL Capability Model In relation to Figure 1, Link...

Communication and collaboration technologies.

Science.gov (United States)

Cheeseman, Susan E

2012-01-01

This is the third in a series of columns exploring health information technology (HIT) in the neonatal intensive care unit (NICU). The first column provided background information on the implementation of information technology throughout the health care delivery system, as well as the requisite informatics competencies needed for nurses to fully engage in the digital era of health care. The second column focused on information and resources to master basic computer competencies described by the TIGER initiative (Technology Informatics Guiding Education Reform) as learning about computers, computer networks, and the transfer of data.1 This column will provide additional information related to basic computer competencies, focusing on communication and collaboration technologies. Computers and the Internet have transformed the way we communicate and collaborate. Electronic communication is the ability to exchange information through the use of computer equipment and software.2 Broadly defined, any technology that facilitates linking one or more individuals together is a collaborative tool. Collaboration using technology encompasses an extensive range of applications that enable groups of individuals to work together including e-mail, instant messaging (IM ), and several web applications collectively referred to as Web 2.0 technologies. The term Web 2.0 refers to web applications where users interact and collaborate with each other in a collective exchange of ideas generating content in a virtual community. Examples of Web 2.0 technologies include social networking sites, blogs, wikis, video sharing sites, and mashups. Many organizations are developing collaborative strategies and tools for employees to connect and interact using web-based social media technologies.3.

Unlocking the potential of smart grid technologies with behavioral science.

Science.gov (United States)

Sintov, Nicole D; Schultz, P Wesley

2015-01-01

Smart grid systems aim to provide a more stable and adaptable electricity infrastructure, and to maximize energy efficiency. Grid-linked technologies vary widely in form and function, but generally share common potentials: to reduce energy consumption via efficiency and/or curtailment, to shift use to off-peak times of day, and to enable distributed storage and generation options. Although end users are central players in these systems, they are sometimes not central considerations in technology or program design, and in some cases, their motivations for participating in such systems are not fully appreciated. Behavioral science can be instrumental in engaging end-users and maximizing the impact of smart grid technologies. In this paper, we present emerging technologies made possible by a smart grid infrastructure, and for each we highlight ways in which behavioral science can be applied to enhance their impact on energy savings.

Photonics in switching: enabling technologies and subsystem design

DEFF Research Database (Denmark)

Vlachos, K.; Raffaelli, C.; Aleksic, S.

2009-01-01

This paper describes recent research activities and results in the area of photonic switching carried out within the framework of the EU-funded e-Photon/ONe + network of excellence, Virtual Department on Optical Switching. Technology aspects of photonics in switching and, in particular, recent...

Can wireless technology enable new diabetes management tools?

Science.gov (United States)

Hedtke, Paul A

2008-01-01

Mobile computing and communications technology embodied in the modern cell phone device can be employed to improve the lives of diabetes patients by giving them better tools for self-management. Several companies are working on the development of diabetes management tools that leverage the ubiquitous cell phone to bring self-management tools to the hand of the diabetes patient. Integration of blood glucose monitoring (BGM) technology with the cell phone platform adds a level of convenience for the person with diabetes, but, more importantly, allows BGM data to be automatically captured, logged, and processed in near real time in order to provide the diabetes patient with assistance in managing their blood glucose levels. Other automatic measurements can estimate physical activity, and information regarding medication events and food intake can be captured and analyzed in order to provide the diabetes patient with continual assistance in managing their therapy and behaviors in order to improve glycemic control. The path to realization of such solutions is not, however, without obstacles.

The Social Construction of the Great Belt Fixed Link

DEFF Research Database (Denmark)

Munch, Birgitte

1994-01-01

Working paper in Technology Management. Actor Network theory (ANT) used upon the process of negotiating legislation and constructing the Great Belt fixed link.......Working paper in Technology Management. Actor Network theory (ANT) used upon the process of negotiating legislation and constructing the Great Belt fixed link....

Linked Health Data: how linked data can help provide better health decisions.

Science.gov (United States)

Farinelli, Fernanda; Barcellos de Almeida, Maurício; Linhares de Souza, Yóris

2015-01-01

This paper provides a brief survey about the use of linked data in healthcare to foster better health decisions and increase health knowledge. We present real cases from the Brazilian experience and emphasize some issues in research. This paper is not intending to be fully comprehensive, we discuss some open issues and research challenges in linked data and the technologies involved. We conclude that even though linked data has been adopted in many countries, some challenges have to be overcome, for example, interoperability between different standards. A defined solution able to foster the semantic interoperability between different standards must be developed. Benefits contributed through linked health data involve better decision making on diagnostics, assertive treatments, knowledge acquisition, improvements in quality healthcare service to citizens.

Use of AFIS for linking scenes of crime.

Science.gov (United States)

Hefetz, Ido; Liptz, Yakir; Vaturi, Shaul; Attias, David

2016-05-01

Forensic intelligence can provide critical information in criminal investigations - the linkage of crime scenes. The Automatic Fingerprint Identification System (AFIS) is an example of a technological improvement that has advanced the entire forensic identification field to strive for new goals and achievements. In one example using AFIS, a series of burglaries into private apartments enabled a fingerprint examiner to search latent prints from different burglary scenes against an unsolved latent print database. Latent finger and palm prints coming from the same source were associated with over than 20 cases. Then, by forensic intelligence and profile analysis the offender's behavior could be anticipated. He was caught, identified, and arrested. It is recommended to perform an AFIS search of LT/UL prints against current crimes automatically as part of laboratory protocol and not by an examiner's discretion. This approach may link different crime scenes. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Propagation engineering in radio links design

CERN Document Server

Ghasemi, Abdollah; Ghasemi, Farshid

2013-01-01

Propagation Engineering in Radio Link Design covers the basic principles of radiowaves propagation in a practical manner.  This fundamental understanding enables the readers to design radio links efficiently. This book elaborates on new achievements as well as recently developed propagation models.  This is in addition to a comprehensive overview of fundamentals of propagation in various scenarios. It examines theoretical calculations, approaches and applied procedures needed for radio links design. The authors study and analysis of the main propagation phenomena and its mechanisms based on the recommendations of International Telecommunications Union, (ITU). The book has been organized in 9 chapters and examines the role of antennas and passive reflectors in radio services, propagation mechanisms related to radar, satellite, short distance, broadcasting and trans-horizon radio links, with two chapters devoted to radio noise and main  parameters of radio link design. The book presents some 278 illustration...

SOME RECENT TECHNOLOGY DEVELOPMENTS FROM THE UK'S NATIONAL NUCLEAR LABORATORY TO ENABLE HAZARD CHARACTERISATION FOR NUCLEAR DECOMMISSIONING APPLICATIONS

Energy Technology Data Exchange (ETDEWEB)

Farfan, E.; Foley, T.

2010-02-11

Under its programme of self investment Internal Research and Development (IR&D), the UK's National Nuclear Laboratory (NNL) is addressing the requirement for development in technology to enable hazard characterisation for nuclear decommissioning applications. Three such examples are described here: (1) RadBall developed by the NNL (patent pending) is a deployable baseball-sized radiation mapping device which can, from a single location, locate and quantify radiation hazards. RadBall offers a means to collect information regarding the magnitude and distribution of radiation in a given cell, glovebox or room to support the development of a safe, cost effective decontamination strategy. RadBall requires no electrical supplies and is relatively small, making it easy to be deployed and used to map radiation hazards in hard to reach areas. Recent work conducted in partnership with the Savannah River National Laboratory (SRNL) is presented. (2) HiRAD (patent pending) has been developed by the NNL in partnership with Tracerco Ltd (UK). HiRAD is a real-time, remotely deployed, radiation detection device designed to operate in elevated levels of radiation (i.e. thousands and tens of thousands of Gray) as seen in parts of the nuclear industry. Like the RadBall technology, the HiRAD system does not require any electrical components, the small dimensions and flexibility of the device allow it to be positioned in difficult to access areas (such as pipe work). HiRAD can be deployed as a single detector, a chain, or as an array giving the ability to monitor large process areas. Results during the development and deployment of the technology are presented. (3) Wireless Sensor Network is a NNL supported development project led by the University of Manchester (UK) in partnership with Oxford University (UK). The project is concerned with the development of wireless sensor network technology to enable the underwater deployment and communication of miniaturised probes allowing pond

Recent advances in corneal collagen cross-linking

Directory of Open Access Journals (Sweden)

Gitansha Shreyas Sachdev

2017-01-01

Full Text Available Corneal collagen cross-linking has become the preferred modality of treatment for corneal ectasia since its inception in late 1990s. Numerous studies have demonstrated the safety and efficacy of the conventional protocol. Our understanding of the cross-linking process is ever evolving, with its wide implications in the form of accelerated and pulsed protocols. Newer advancements in technology include various riboflavin formulations and the ability to deliver higher fluence protocols with customised irradiation patterns. A greater degree of customisation is likely the path forward, which will aim at achieving refractive improvements along with disease stability. The use of cross-linking for myopic correction is another avenue under exploration. Combination of half fluence cross-linking with refractive correction for high errors to prevent post LASIK regression is gaining interest. This review aims to highlight the various advancements in the cross-linking technology and its clinical applications.

The emerging Web 2.0 social software: an enabling suite of sociable technologies in health and health care education.

Science.gov (United States)

Kamel Boulos, Maged N; Wheeler, Steve

2007-03-01

Web 2.0 sociable technologies and social software are presented as enablers in health and health care, for organizations, clinicians, patients and laypersons. They include social networking services, collaborative filtering, social bookmarking, folksonomies, social search engines, file sharing and tagging, mashups, instant messaging, and online multi-player games. The more popular Web 2.0 applications in education, namely wikis, blogs and podcasts, are but the tip of the social software iceberg. Web 2.0 technologies represent a quite revolutionary way of managing and repurposing/remixing online information and knowledge repositories, including clinical and research information, in comparison with the traditional Web 1.0 model. The paper also offers a glimpse of future software, touching on Web 3.0 (the Semantic Web) and how it could be combined with Web 2.0 to produce the ultimate architecture of participation. Although the tools presented in this review look very promising and potentially fit for purpose in many health care applications and scenarios, careful thinking, testing and evaluation research are still needed in order to establish 'best practice models' for leveraging these emerging technologies to boost our teaching and learning productivity, foster stronger 'communities of practice', and support continuing medical education/professional development (CME/CPD) and patient education.

Technology Mentors: Enablers of ICT Uptake in Australian Small Business

Science.gov (United States)

Woodley, Carolyn J.; Burgess, Stephen; Paguio, Rafael; Bingley, Scott

2015-01-01

Purpose: The purpose of this paper is to report on the innovative employment of students as technology mentors as part of a Blended Learning Program (BLP) that supported a group of owner-managers of small businesses to adopt appropriate information and communication technologies (ICT) to enhance their work practices. Design/methodology/approach:…

IT–Enabled Knowledge Management System for Nuclear R&D Organization

International Nuclear Information System (INIS)

Jehadeesan, R.

2016-01-01

Full text: A knowledge management (KM) system for codification, preservation and utilization of all multi-disciplinary knowledge assets accumulated over several decades of nuclear research, development and operation is essential for improved organizational productivity, new insights and high-levels of innovation. IGCAR’s Nuclear Knowledge Management System deployed with IT-as-enabler addresses various challenges related to people, process, technology and resources and provides a technology platform to leverage the collective knowledge of the organization. This paper describes the strategic action plan and structured approach followed for building IT-enabled knowledge management system to acquire, store, share and utilize the organizational knowledge assets in the explicit form of publications, technical reports, presentations, projects, activities, facilities etc., along with the tacit knowledge multi-media modules. It highlights the salient features of the in-house-developed advanced KM portal deployed for facilitating the creation, archival, retrieval, sharing and dissemination of knowledge assets originating from diverse domains, in an organized and secured way. The paper also underlines the application of semantic technologies, tools and standards in implementing a robust KM technology infrastructure with enhanced functionalities. (author

Forging the links: a technology policy for Canada

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

The Canadian economy is faced with a serious crisis which is manifest in high unemployment, persistent trade imbalances, and a falling currency. These immediate problems reflect a deeper crisis in the structure of Canadian industry, and in particular, manufacturing, which precedes the recent recession in the Western economies. High levels of technological and managerial truncation, and relative technological backwardness have placed Canadian industry at a particular disadvantage in light of the substantial changes taking place in world economies. The advanced industrial nations are moving into more technologically advanced forms of production - the new industrial revolution. This trend threatens to outpace the innovative capacity of Canadian industry to such an extent that its manufactured products will no longer be competitive with those of principal trading partners. Further, a number of developing countries with lower labour costs are moving into many of the conventional areas of industrial activity (e.g., assembly manufacturing operations), thus threatening to displace a significant number of Canada's traditional manufacturing activities through increased price competition. A rebuilding of Canada's industrial structure as well as improving its technological capability is required. Implementation of such an industrial strategy would require four initial policy objectives: 1) increase the demand for Canadian technology within the industrial system; 2) expand Canadian industry's potential to develop technology; 3) strengthen the capacity for the absorption of technology at the level of the firm; 4) increase the ability of Canadian firms to import technology under conditions favourable to Canada.

Displays enabling mobile multimedia

Science.gov (United States)

Kimmel, Jyrki

2007-02-01

With the rapid advances in telecommunications networks, mobile multimedia delivery to handsets is now a reality. While a truly immersive multimedia experience is still far ahead in the mobile world, significant advances have been made in the constituent audio-visual technologies to make this become possible. One of the critical components in multimedia delivery is the mobile handset display. While such alternatives as headset-style near-to-eye displays, autostereoscopic displays, mini-projectors, and roll-out flexible displays can deliver either a larger virtual screen size than the pocketable dimensions of the mobile device can offer, or an added degree of immersion by adding the illusion of the third dimension in the viewing experience, there are still challenges in the full deployment of such displays in real-life mobile communication terminals. Meanwhile, direct-view display technologies have developed steadily, and can provide a development platform for an even better viewing experience for multimedia in the near future. The paper presents an overview of the mobile display technology space with an emphasis on the advances and potential in developing direct-view displays further to meet the goal of enabling multimedia in the mobile domain.

Management as the enabling technology for space exploration

Science.gov (United States)

Mandell, Humboldt C., Jr.; Griffin, Michael D.

1992-01-01

This paper addresses the dilemma which NASA faces in starting a major new initiative within the constraints of the current national budget. It addressed the fact that unlike previous NASA programs, the major mission constraints come from management factors as opposed to technologies. An action plan is presented, along with some results from early management simplification processes.

77 FR 42738 - Request for Information on Quality Measurement Enabled by Health IT

Science.gov (United States)

2012-07-20

... Information on Quality Measurement Enabled by Health IT AGENCY: Agency for Healthcare Research and Quality... diversified stakeholders (health information technology (IT) system developers, including vendors; payers... strategies and challenges regarding quality measurement enabled by health IT. Quality measurement--the...

Systems architecture: a new model for sustainability and the built environment using nanotechnology, biotechnology, information technology, and cognitive science with living technology.

Science.gov (United States)

Armstrong, Rachel

2010-01-01

This report details a workshop held at the Bartlett School of Architecture, University College London, to initiate interdisciplinary collaborations for the practice of systems architecture, which is a new model for the generation of sustainable architecture that combines the discipline of the study of the built environment with the scientific study of complexity, or systems science, and adopts the perspective of systems theory. Systems architecture offers new perspectives on the organization of the built environment that enable architects to consider architecture as a series of interconnected networks with embedded links into natural systems. The public workshop brought together architects and scientists working with the convergence of nanotechnology, biotechnology, information technology, and cognitive science and with living technology to investigate the possibility of a new generation of smart materials that are implied by this approach.

How to Enable Employee Creativity in a Team Context

DEFF Research Database (Denmark)

Bai, Yuntao; Lin, Li; Li, Peter Ping

2016-01-01

. However, the issue of how to enhance employee creativity from the perspective of team leader in a team context is largely understudied. This study aims to explore the cross-level links between the transformational behavior of team leader and employee creativity in a team context. We propose a three....... This study highlights the critical role of transformational leadership as across-level enabler for employee creativity....

A Joint Link and Channel Assignment Routing Scheme for Cognitive Radio Networks

Directory of Open Access Journals (Sweden)

H.S.Zhao

2013-12-01

Full Text Available Cognitive radio (CR is a promising technology that enables opportunistic utilization of the temporarily vacant spectrum to mitigate the spectrum scarcity in wireless communications. Since secondary users (SUs should vacate the channel in use immediately after detecting the reappearances of primary users (PUs in cognitive radio networks (CRNs, the route reliability is a distinctive challenge for routing in CRNs. Furthermore, the throughput requirement of an SU session should be satisfied and it is always preferable to select a route with less negative influence on other current or latish sessions. To account for the route reliability challenge, we study the joint link and channel assignment routing problem for CRNs. It is formulated in a form of integer nonlinear programming (INLP, which is NP-hard, with the objective of minimizing the interference of a new route to other routes while providing route reliability and throughput guarantee. An on-demand route discovery algorithm is proposed to find reliable candidate paths, while a joint link and channel assignment routing algorithm with sequentially-connected-link coordination is proposed to choose the near-optimal route for improving the route reliability and minimizing negative influence. Simulation results demonstrate that the proposed algorithm achieves considerable improvement over existing schemes in both route reliability and throughput.

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

Science.gov (United States)

Grady, Joseph E.; Halbig, Michael C.; Singh, Mrityunjay

2015-01-01

In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

Learning by Example: Designing and Developing Linked Data Application

Science.gov (United States)

Tharani, Karim

2016-01-01

According to constructivist theory of learning, new knowledge is learned on the basis of what is already known by learners. Thus for an emerging and transformative technology such as Linked Data to be learned, the technology must be made relevant for learners and must be compatible with their skillset. Designing and developing Linked Data…

Evaluating Complex Interventions and Health Technologies Using Normalization Process Theory: Development of a Simplified Approach and Web-Enabled Toolkit

LENUS (Irish Health Repository)

May, Carl R

2011-09-30

Abstract Background Normalization Process Theory (NPT) can be used to explain implementation processes in health care relating to new technologies and complex interventions. This paper describes the processes by which we developed a simplified version of NPT for use by clinicians, managers, and policy makers, and which could be embedded in a web-enabled toolkit and on-line users manual. Methods Between 2006 and 2010 we undertook four tasks. (i) We presented NPT to potential and actual users in multiple workshops, seminars, and presentations. (ii) Using what we discovered from these meetings, we decided to create a simplified set of statements and explanations expressing core constructs of the theory (iii) We circulated these statements to a criterion sample of 60 researchers, clinicians and others, using SurveyMonkey to collect qualitative textual data about their criticisms of the statements. (iv) We then reconstructed the statements and explanations to meet users\\' criticisms, embedded them in a web-enabled toolkit, and beta tested this \\'in the wild\\'. Results On-line data collection was effective: over a four week period 50\\/60 participants responded using SurveyMonkey (40\\/60) or direct phone and email contact (10\\/60). An additional nine responses were received from people who had been sent the SurveyMonkey form by other respondents. Beta testing of the web enabled toolkit produced 13 responses, from 327 visits to http:\\/\\/www.normalizationprocess.org. Qualitative analysis of both sets of responses showed a high level of support for the statements but also showed that some statements poorly expressed their underlying constructs or overlapped with others. These were rewritten to take account of users\\' criticisms and then embedded in a web-enabled toolkit. As a result we were able translate the core constructs into a simplified set of statements that could be utilized by non-experts. Conclusion Normalization Process Theory has been developed through

Evaluating complex interventions and health technologies using normalization process theory: development of a simplified approach and web-enabled toolkit

Directory of Open Access Journals (Sweden)

Murray Elizabeth

2011-09-01

Full Text Available Abstract Background Normalization Process Theory (NPT can be used to explain implementation processes in health care relating to new technologies and complex interventions. This paper describes the processes by which we developed a simplified version of NPT for use by clinicians, managers, and policy makers, and which could be embedded in a web-enabled toolkit and on-line users manual. Methods Between 2006 and 2010 we undertook four tasks. (i We presented NPT to potential and actual users in multiple workshops, seminars, and presentations. (ii Using what we discovered from these meetings, we decided to create a simplified set of statements and explanations expressing core constructs of the theory (iii We circulated these statements to a criterion sample of 60 researchers, clinicians and others, using SurveyMonkey to collect qualitative textual data about their criticisms of the statements. (iv We then reconstructed the statements and explanations to meet users' criticisms, embedded them in a web-enabled toolkit, and beta tested this 'in the wild'. Results On-line data collection was effective: over a four week period 50/60 participants responded using SurveyMonkey (40/60 or direct phone and email contact (10/60. An additional nine responses were received from people who had been sent the SurveyMonkey form by other respondents. Beta testing of the web enabled toolkit produced 13 responses, from 327 visits to http://www.normalizationprocess.org. Qualitative analysis of both sets of responses showed a high level of support for the statements but also showed that some statements poorly expressed their underlying constructs or overlapped with others. These were rewritten to take account of users' criticisms and then embedded in a web-enabled toolkit. As a result we were able translate the core constructs into a simplified set of statements that could be utilized by non-experts. Conclusion Normalization Process Theory has been developed through

Enterprise Linked Data as Core Business Infrastructure

Science.gov (United States)

Harris, Steve; Ilube, Tom; Tuffield, Mischa

This chapter describes Garlik's motivation, interest, and experiences of using Linked Data technologies in its online services. It describes the methodologies and approaches that were taken in order to deploy online services to hundreds of thousands of users, and describes the trade-offs inherent in our choice of these technologies for our production systems. In order to help illustrate and aid the arguments for the adoption of SemanticWeb technologies this chapter will focus on two of our customer facing products, DataPatrol, a consumer-centric personal information protection product, and QDOS a Linked Data service that is used to measure peoples' online activity

The advanced linked extended reconnaissance and targeting technology demonstration project

Science.gov (United States)

Cruickshank, James; de Villers, Yves; Maheux, Jean; Edwards, Mark; Gains, David; Rea, Terry; Banbury, Simon; Gauthier, Michelle

2007-06-01

The Advanced Linked Extended Reconnaissance & Targeting (ALERT) Technology Demonstration (TD) project is addressing key operational needs of the future Canadian Army's Surveillance and Reconnaissance forces by fusing multi-sensor and tactical data, developing automated processes, and integrating beyond line-of-sight sensing. We discuss concepts for displaying and fusing multi-sensor and tactical data within an Enhanced Operator Control Station (EOCS). The sensor data can originate from the Coyote's own visible-band and IR cameras, laser rangefinder, and ground-surveillance radar, as well as beyond line-of-sight systems such as a mini-UAV and unattended ground sensors. The authors address technical issues associated with the use of fully digital IR and day video cameras and discuss video-rate image processing developed to assist the operator to recognize poorly visible targets. Automatic target detection and recognition algorithms processing both IR and visible-band images have been investigated to draw the operator's attention to possible targets. The machine generated information display requirements are presented with the human factors engineering aspects of the user interface in this complex environment, with a view to establishing user trust in the automation. The paper concludes with a summary of achievements to date and steps to project completion.

EarthCube GeoLink: Semantics and Linked Data for the Geosciences

Science.gov (United States)

Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Cheatham, M.; Fils, D.; Hitzler, P.; Janowicz, K.; Ji, P.; Jones, M. B.; Krisnadhi, A.; Lehnert, K. A.; Mickle, A.; Narock, T.; O'Brien, M.; Raymond, L. M.; Schildhauer, M.; Shepherd, A.; Wiebe, P. H.

2015-12-01

The NSF EarthCube initiative is building next-generation cyberinfrastructure to aid geoscientists in collecting, accessing, analyzing, sharing, and visualizing their data and knowledge. The EarthCube GeoLink Building Block project focuses on a specific set of software protocols and vocabularies, often characterized as the Semantic Web and "Linked Data", to publish data online in a way that is easily discoverable, accessible, and interoperable. GeoLink brings together specialists from the computer science, geoscience, and library science domains, and includes data from a network of NSF-funded repositories that support scientific studies in marine geology, marine ecosystems, biogeochemistry, and paleoclimatology. We are working collaboratively with closely-related Building Block projects including EarthCollab and CINERGI, and solicit feedback from RCN projects including Cyberinfrastructure for Paleogeosciences (C4P) and iSamples. GeoLink has developed a modular ontology that describes essential geoscience research concepts; published data from seven collections (to date) on the Web as geospatially-enabled Linked Data using this ontology; matched and mapped data between collections using shared identifiers for investigators, repositories, datasets, funding awards, platforms, research cruises, physical specimens, and gazetteer features; and aggregated the results in a shared knowledgebase that can be queried via a standard SPARQL endpoint. Client applications have been built around the knowledgebase, including a Web/map-based data browser using the Leaflet JavaScript library and a simple query service using the OpenSearch format. Future development will include extending and refining the GeoLink ontology, adding content from additional repositories, developing semi-automated algorithms to enhance metadata, and further work on client applications.

Information technology-enabled team-based, patient-centered care: The example of depression screening and management in cancer care.

Science.gov (United States)

Randhawa, Gurvaneet S; Ahern, David K; Hesse, Bradford W

2017-03-01

The existing healthcare delivery systems across the world need to be redesigned to ensure high-quality care is delivered to all patients. This redesign needs to ensure care is knowledge-based, patient-centered and systems-minded. The rapid advances in the capabilities of information and communication technology and its recent rapid adoption in healthcare delivery have ensured this technology will play a vital role in the redesign of the healthcare delivery system. This commentary highlights promising new developments in health information technology (IT) that can support patient engagement and self-management as well as team-based, patient-centered care. Collaborative care is an effective approach to screen and treat depression in cancer patients and it is a good example of the benefits of team-based and patient-centered care. However, this approach was developed prior to the widespread adoption and use of health IT. We provide examples to illustrate how health IT can improve prevention and treatment of depression in cancer patients. We found several knowledge gaps that limit our ability to realize the full potential of health IT in the context of cancer and comorbid depression care. These gaps need to be filled to improve patient engagement; enhance the reach and effectiveness of collaborative care and web-based programs to prevent and treat depression in cancer patients. We also identify knowledge gaps in health IT design and implementation. Filling these gaps will help shape policies that enable clinical teams to deliver high-quality cancer care globally.

East, West German gas pipeline grids linked

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that Ruhrgas AG, Essen, has started up the first large diameter gas pipeline linking the gas grids of former East and West Germany. Ruhrgas last month placed in service a 40 in., 70 km line at Vitzeroda, near Eisenach, linking a new Ruhrgas pipeline in Hesse state with a 330 km gas pipeline built last year in Thuringia and Saxony states by Erdgasversorgungs GmbH (EVG), Leipzig. The new link enables pipeline operator EVG to receive 70 bcf/year of western European gas via Ruhrgas, complementing the 35 bcf/year of gas coming from the Commonwealth of Independent States via Verbundnetz Gas AG (VNG), Leipzig

A SmallSat Approach for Global Imaging Spectroscopy of the Earth SYSTEM Enabled by Advanced Technology

Science.gov (United States)

Green, R. O.; Asner, G. P.; Thompson, D. R.; Mouroulis, P.; Eastwood, M. L.; Chien, S.

2017-12-01

Global coverage imaging spectroscopy in the solar reflected energy portion of the spectrum has been identified by the Earth Decadal Survey as an important measurement that enables a diverse set of new and time critical science objectives/targets for the Earth system. These science objectives include biodiversity; ecosystem function; ecosystem biogeochemistry; initialization and constraint of global ecosystem models; fire fuel, combustion, burn severity, and recovery; surface mineralogy, geochemistry, geologic processes, soils, and hazards; global mineral dust source composition; cryospheric albedo, energy balance, and melting; coastal and inland water habitats; coral reefs; point source gas emission; cloud thermodynamic phase; urban system properties; and more. Traceability of these science objectives to spectroscopic measurement in the visible to short wavelength infrared portion of the spectrum is summarized. New approaches, including satellite constellations, to acquire these global imaging spectroscopy measurements is presented drawing from recent advances in optical design, detector technology, instrument architecture, thermal control, on-board processing, data storage, and downlink.

Entity Linking Leveraging the GeoDeepDive Cyberinfrastructure and Managing Uncertainty with Provenance.

Science.gov (United States)

Maio, R.; Arko, R. A.; Lehnert, K.; Ji, P.

2017-12-01

Unlocking the full, rich, network of links between the scientific literature and the real world entities to which data correspond - such as field expeditions (cruises) on oceanographic research vessels and physical samples collected during those expeditions - remains a challenge for the geoscience community. Doing so would enable data reuse and integration on a broad scale; making it possible to inspect the network and discover, for example, all rock samples reported in the scientific literature found within 10 kilometers of an undersea volcano, and associated geochemical analyses. Such a capability could facilitate new scientific discoveries. The GeoDeepDive project provides negotiated access to 4.2+ million documents from scientific publishers, enabling text and document mining via a public API and cyberinfrastructure. We mined this corpus using entity linking techniques, which are inherently uncertain, and recorded provenance information about each link. This opens the entity linking methodology to scrutiny, and enables downstream applications to make informed assessments about the suitability of an entity link for consumption. A major challenge is how to model and disseminate the provenance information. We present results from entity linking between journal articles, research vessels and cruises, and physical samples from the Petrological Database (PetDB), and incorporate Linked Data resources such as cruises in the Rolling Deck to Repository (R2R) catalog where possible. Our work demonstrates the value and potential of the GeoDeepDive cyberinfrastructure in combination with Linked Data infrastructure provided by the EarthCube GeoLink project. We present a research workflow to capture provenance information that leverages the World Wide Web Consortium (W3C) recommendation PROV Ontology.

Linked Data Evolving the Web into a Global Data Space

CERN Document Server

Heath, Tom

2011-01-01

The World Wide Web has enabled the creation of a global information space comprising linked documents. As the Web becomes ever more enmeshed with our daily lives, there is a growing desire for direct access to raw data not currently available on the Web or bound up in hypertext documents. Linked Data provides a publishing paradigm in which not only documents, but also data, can be a first class citizen of the Web, thereby enabling the extension of the Web with a global data space based on open standards - the Web of Data. In this Synthesis lecture we provide readers with a detailed technical i

The anatomy of the grid : enabling scalable virtual organizations.

Energy Technology Data Exchange (ETDEWEB)

Foster, I.; Kesselman, C.; Tuecke, S.; Mathematics and Computer Science; Univ. of Chicago; Univ. of Southern California

2001-10-01

'Grid' computing has emerged as an important new field, distinguished from conventional distributed computing by its focus on large-scale resource sharing, innovative applications, and, in some cases, high performance orientation. In this article, the authors define this new field. First, they review the 'Grid problem,' which is defined as flexible, secure, coordinated resource sharing among dynamic collections of individuals, institutions, and resources -- what is referred to as virtual organizations. In such settings, unique authentication, authorization, resource access, resource discovery, and other challenges are encountered. It is this class of problem that is addressed by Grid technologies. Next, the authors present an extensible and open Grid architecture, in which protocols, services, application programming interfaces, and software development kits are categorized according to their roles in enabling resource sharing. The authors describe requirements that they believe any such mechanisms must satisfy and discuss the importance of defining a compact set of intergrid protocols to enable interoperability among different Grid systems. Finally, the authors discuss how Grid technologies relate to other contemporary technologies, including enterprise integration, application service provider, storage service provider, and peer-to-peer computing. They maintain that Grid concepts and technologies complement and have much to contribute to these other approaches.

Use of Dynamic Technologies for Web-enabled Database Management Systems

OpenAIRE

Bogdanova, Galina; Todorov, Todor; Blagoev, Dimitar; Todorova, Mirena

2007-01-01

In this paper we consider two computer systems and the dynamic Web technologies they are using. Different contemporary dynamic web technologies are described in details and their advantages and disadvantages have been shown. Specific applications are developed, clinic and studying systems, and their programming models are described. Finally we implement these two applications in the students education process: Online studying has been tested in the Technical University – Va...

Semantic Technologies for Nuclear Knowledge Modelling and Applications

International Nuclear Information System (INIS)

Beraha, D.; Gladyshev, M.

2016-01-01

Full text: The IAEA has been engaged in working with Member States to preserve and enhance nuclear knowledge, and in supporting wide dissemination of safety related technical and technological information enhancing nuclear safety. The knowledge organization systems (ontologies, taxonomies, thesauri, etc.) provide one of the means to model and structure a given knowledge domain. The significance of knowledge organization systems (KOS) has been greatly enhanced by the evolution of the semantic technologies, enabling machines to “understand” the concepts described in a KOS, and to use them in a variety of applications. Over recent years semantic technologies have emerged as efficient means to improve access to information and knowledge. The Semantic Web Standards play an important role in creating an infrastructure of interoperable data sources based on principles of Linked Data. The status of utilizing semantic technologies in the nuclear domain is shortly reviewed, noting that such technologies are in their early stage of adoption, and considering some aspects which are specific to nuclear knowledge management. Several areas are described where semantic technologies are already deployed, and other areas are indicated where applications based on semantic technologies will have a strong impact on nuclear knowledge management in the near future. (author

Bluetooth-enabled teleradiology: applications and complications.

Science.gov (United States)

Hura, Angela M

2002-01-01

Wireless personal area networks and local area networks are becoming increasingly more prevalent in the teleradiology and telemedicine industry. Although there has been much debate about the role that Bluetooth will play in the future of wireless technology, both promoters and doubters acknowledge that Bluetooth will have an impact on networking, even if only as a "niche" product. This article provides an overview of the Bluetooth standard and highlights current and future areas of inclusion for use in a teleradiology environment. The possibilities for Bluetooth in a teleradiology environment without wires are nearly boundless and an overview of current and proposed Bluetooth-enabled radiology equipment and vendors is provided. A comparison of Bluetooth and other wireless technologies is provided, including areas of similarity and potential conflict. Bluetooth and other wireless technologies can not only peacefully coexist but also complement each other and provide enhanced teleradiology services.

PMEL contributions to the collaboration: SCALING THE EARTH SYSTEM GRID TO PETASCALE DATA for the DOE SciDACs Earth System Grid Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Hankin, Steve

2012-06-01

Drawing to a close after five years of funding from DOE's ASCR and BER program offices, the SciDAC-2 project called the Earth System Grid (ESG) Center for Enabling Technologies has successfully established a new capability for serving data from distributed centers. The system enables users to access, analyze, and visualize data using a globally federated collection of networks, computers and software. The ESG software now known as the Earth System Grid Federation (ESGF) has attracted a broad developer base and has been widely adopted so that it is now being utilized in serving the most comprehensive multi-model climate data sets in the world. The system is used to support international climate model intercomparison activities as well as high profile U.S. DOE, NOAA, NASA, and NSF projects. It currently provides more than 25,000 users access to more than half a petabyte of climate data (from models and from observations) and has enabled over a 1,000 scientific publications.

Archetype-based data warehouse environment to enable the reuse of electronic health record data.

Science.gov (United States)

Marco-Ruiz, Luis; Moner, David; Maldonado, José A; Kolstrup, Nils; Bellika, Johan G

2015-09-01

The reuse of data captured during health care delivery is essential to satisfy the demands of clinical research and clinical decision support systems. A main barrier for the reuse is the existence of legacy formats of data and the high granularity of it when stored in an electronic health record (EHR) system. Thus, we need mechanisms to standardize, aggregate, and query data concealed in the EHRs, to allow their reuse whenever they are needed. To create a data warehouse infrastructure using archetype-based technologies, standards and query languages to enable the interoperability needed for data reuse. The work presented makes use of best of breed archetype-based data transformation and storage technologies to create a workflow for the modeling, extraction, transformation and load of EHR proprietary data into standardized data repositories. We converted legacy data and performed patient-centered aggregations via archetype-based transformations. Later, specific purpose aggregations were performed at a query level for particular use cases. Laboratory test results of a population of 230,000 patients belonging to Troms and Finnmark counties in Norway requested between January 2013 and November 2014 have been standardized. Test records normalization has been performed by defining transformation and aggregation functions between the laboratory records and an archetype. These mappings were used to automatically generate open EHR compliant data. These data were loaded into an archetype-based data warehouse. Once loaded, we defined indicators linked to the data in the warehouse to monitor test activity of Salmonella and Pertussis using the archetype query language. Archetype-based standards and technologies can be used to create a data warehouse environment that enables data from EHR systems to be reused in clinical research and decision support systems. With this approach, existing EHR data becomes available in a standardized and interoperable format, thus opening a world

A Mobile Communications Space Link Between the Space Shuttle Orbiter and the Advanced Communications Technology Satellite

Science.gov (United States)

Fink, Patrick; Arndt, G. D.; Bondyopadhyay, P.; Shaw, Roland

1994-01-01

A communications experiment is described as a link between the Space Shuttle Orbiter (SSO) and the Advanced Communications Technology Satellite (ACTS). Breadboarding for this experiment has led to two items with potential for commercial application: a 1-Watt Ka-band amplifier and a Ka-band, circularly polarized microstrip antenna. Results of the hybrid Ka-band amplifier show gain at 30 dB and a saturated output power of 28.5 dBm. A second version comprised of MMIC amplifiers is discussed. Test results of the microstrip antenna subarray show a gain of approximately 13 dB and excellent circular polarization.

Relay Placement for FSO Multihop DF Systems With Link Obstacles and Infeasible Regions

KAUST Repository

Zhu, Bingcheng; Cheng, Julian; Alouini, Mohamed-Slim; Wu, Lenan

2015-01-01

Optimal relay placement is studied for free-space optical multihop communication with link obstacles and infeasible regions. An optimal relay placement scheme is proposed to achieve the lowest outage probability, enable the links to bypass obstacles

Enabling Indoor Location-Based Services

DEFF Research Database (Denmark)

Radaelli, Laura

Indoor spaces have always attracted interest from different scientific disciplines. Relatively recent interest in indoor settings by computer scientists is driven in part by the increasing use of smartphones, which serve as a platform for service delivery and can generate extensive volumes...... of trajectory data that can be used to study how people actually use indoor spaces. In this dissertation, we contribute partial solutions that address challenges in indoor positioning and indoor trajectory management and analysis. The key enabler of indoor location-based services and indoor movement analysis...... is a well-functioning positioning system that can be easily deployed in most public places. Different technologies are able to provide indoor positioning with different accuracy and coverage, but it is difficult to find a technology that by itself can provide good positioning in the many different layouts...

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-08-23

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

Energy Technology Data Exchange (ETDEWEB)

Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

A new resource for characterizing X-linked genes in Drosophila melanogaster: systematic coverage and subdivision of the X chromosome with nested, Y-linked duplications.

Science.gov (United States)

Cook, R Kimberley; Deal, Megan E; Deal, Jennifer A; Garton, Russell D; Brown, C Adam; Ward, Megan E; Andrade, Rachel S; Spana, Eric P; Kaufman, Thomas C; Cook, Kevin R

2010-12-01

Interchromosomal duplications are especially important for the study of X-linked genes. Males inheriting a mutation in a vital X-linked gene cannot survive unless there is a wild-type copy of the gene duplicated elsewhere in the genome. Rescuing the lethality of an X-linked mutation with a duplication allows the mutation to be used experimentally in complementation tests and other genetic crosses and it maps the mutated gene to a defined chromosomal region. Duplications can also be used to screen for dosage-dependent enhancers and suppressors of mutant phenotypes as a way to identify genes involved in the same biological process. We describe an ongoing project in Drosophila melanogaster to generate comprehensive coverage and extensive breakpoint subdivision of the X chromosome with megabase-scale X segments borne on Y chromosomes. The in vivo method involves the creation of X inversions on attached-XY chromosomes by FLP-FRT site-specific recombination technology followed by irradiation to induce large internal X deletions. The resulting chromosomes consist of the X tip, a medial X segment placed near the tip by an inversion, and a full Y. A nested set of medial duplicated segments is derived from each inversion precursor. We have constructed a set of inversions on attached-XY chromosomes that enable us to isolate nested duplicated segments from all X regions. To date, our screens have provided a minimum of 78% X coverage with duplication breakpoints spaced a median of nine genes apart. These duplication chromosomes will be valuable resources for rescuing and mapping X-linked mutations and identifying dosage-dependent modifiers of mutant phenotypes.

From E-commerce to Social Commerce: A Framework to Guide Enabling Cloud Computing

OpenAIRE

Baghdadi, Youcef

2013-01-01

Social commerce is doing commerce in a collaborative and participative way, by using social media, through an enterprise interactive interface that enables social interactions. Technologies such as Web 2.0, Cloud Computing and Service Oriented Architecture (SOA) enable social commerce. Yet, a framework for social commerce, putting Enterprise Social Interactions as central entities, would provide a strong business justification for social commerce design and adoption with these enabling techno...

Low-Power Smart Imagers for Vision-Enabled Sensor Networks

CERN Document Server

Fernández-Berni, Jorge; Rodríguez-Vázquez, Ángel

2012-01-01

This book presents a comprehensive, systematic approach to the development of vision system architectures that employ sensory-processing concurrency and parallel processing to meet the autonomy challenges posed by a variety of safety and surveillance applications.  Coverage includes a thorough analysis of resistive diffusion networks embedded within an image sensor array. This analysis supports a systematic approach to the design of spatial image filters and their implementation as vision chips in CMOS technology. The book also addresses system-level considerations pertaining to the embedding of these vision chips into vision-enabled wireless sensor networks.  Describes a system-level approach for designing of vision devices and  embedding them into vision-enabled, wireless sensor networks; Surveys state-of-the-art, vision-enabled WSN nodes; Includes details of specifications and challenges of vision-enabled WSNs; Explains architectures for low-energy CMOS vision chips with embedded, programmable spatial f...

Advanced Mirror Technology Development for Very Large Space Telescopes

Science.gov (United States)

Stahl, H. P.

2014-01-01

Advanced Mirror Technology Development (AMTD) is a NASA Strategic Astrophysics Technology project to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. The developed mirror technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. Just as JWST’s architecture was driven by launch vehicle, a future UVOIR mission’s architectures (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, to provide the science community with options, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We derived engineering specifications for potential future monolithic or segmented space telescopes based on science needs and implement constraints. And we are maturing six inter-linked critical technologies to enable potential future large aperture UVOIR space telescope: 1) Large-Aperture, Low Areal Density, High Stiffness Mirrors, 2) Support Systems, 3) Mid/High Spatial Frequency Figure Error, 4) Segment Edges, 5) Segment-to-Segment Gap Phasing, and 6) Integrated Model Validation Science Advisory Team and a Systems Engineering Team. We are maturing all six technologies simultaneously because all are required to make a primary mirror assembly (PMA); and, it is the PMA’s on-orbit performance which determines science return. PMA stiffness depends on substrate and support stiffness. Ability to cost-effectively eliminate mid/high spatial figure errors and polishing edges depends on substrate stiffness. On-orbit thermal and mechanical performance depends on substrate stiffness, the coefficient of thermal expansion (CTE) and thermal mass. And, segment-to-segment phasing depends on substrate & structure stiffness

NREL's Advanced Atomic Layer Deposition Enables Lithium-Ion Battery

Science.gov (United States)

Battery Technology News Release: NREL's Advanced Atomic Layer Deposition Enables Lithium-Ion Battery increasingly demanding needs of any battery application. These lithium-ion batteries feature a hybrid solid further customized lithium-ion battery materials for high performance devices by utilizing our patented

Developing as an Academic Leader in a University of Technology in South Africa: Dealing with enabling and constraining teaching and learning environments

Directory of Open Access Journals (Sweden)

'Mabokang Liteboho Monnapula-Mapesela

2017-12-01

Full Text Available While the South African legislation is an enabler for equity, inclusiveness, social justice and the advancement of women for academic leadership roles, institutional cultures and structures are often debilitating. This paper presents the development trajectory of a Black woman as an academic development leader in a South African University of Technology. It examines structural and cultural factors acting as enablers or constraints to leadership development and career advancement for Black women. It analyses dominant structural frames and undertakings of different University stakeholders (agents, which cause stagnation and resistance to morphogenesis and government’s transformation agenda. Using Participatory Narrative Inquiry (PNI, I narrate personal experiences and insights as a participant researcher. I interrogate the experiences, observations and influence of various structural and cultural modalities within Margaret Archer’s (1995 social realist framework of structure, culture and agency. I highlight the implications of these for development of a Black female academic development leader.

BIM: enabling sustainability and asset management through knowledge management.

Science.gov (United States)

Kivits, Robbert Anton; Furneaux, Craig

2013-11-10

Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

Improving local clustering based top-L link prediction methods via asymmetric link clustering information

Science.gov (United States)

Wu, Zhihao; Lin, Youfang; Zhao, Yiji; Yan, Hongyan

2018-02-01

Networks can represent a wide range of complex systems, such as social, biological and technological systems. Link prediction is one of the most important problems in network analysis, and has attracted much research interest recently. Many link prediction methods have been proposed to solve this problem with various techniques. We can note that clustering information plays an important role in solving the link prediction problem. In previous literatures, we find node clustering coefficient appears frequently in many link prediction methods. However, node clustering coefficient is limited to describe the role of a common-neighbor in different local networks, because it cannot distinguish different clustering abilities of a node to different node pairs. In this paper, we shift our focus from nodes to links, and propose the concept of asymmetric link clustering (ALC) coefficient. Further, we improve three node clustering based link prediction methods via the concept of ALC. The experimental results demonstrate that ALC-based methods outperform node clustering based methods, especially achieving remarkable improvements on food web, hamster friendship and Internet networks. Besides, comparing with other methods, the performance of ALC-based methods are very stable in both globalized and personalized top-L link prediction tasks.

Enabling technologies for millimeter-wave radio-over-fiber systems in next generation heterogeneous mobile access networks

Science.gov (United States)

Zhang, Junwen; Yu, Jianjun; Wang, Jing; Xu, Mu; Cheng, Lin; Lu, Feng; Shen, Shuyi; Yan, Yan; Cho, Hyunwoo; Guidotti, Daniel; Chang, Gee-kung

2017-01-01

Fifth-generation (5G) wireless access network promises to support higher access data rate with more than 1,000 times capacity with respect to current long-term evolution (LTE) systems. New radio-access-technologies (RATs) based on higher carrier frequencies to millimeter-wave (MMW) radio-over-fiber, and carrier-aggregation (CA) using multi-band resources are intensively studied to support the high data rate access and effectively use of frequency resources in heterogeneous mobile network (Het-Net). In this paper, we investigate several enabling technologies for MMW RoF systems in 5G Het-Net. Efficient mobile fronthaul (MFH) solutions for 5G centralized radio access network (C-RAN) and beyond are proposed, analyzed and experimentally demonstrated based on the analog scheme. Digital predistortion based on memory polynomial for analog MFH linearization are presented with improved EVM performances and receiver sensitivity. We also propose and experimentally demonstrate a novel inter-/intra- RAT CA scheme for 5G Het- Net. The real-time standard 4G-LTE signal is carrier-aggregated with three broadband 60GHz MMW signals based on proposed optical-domain band-mapping method. RATs based on new waveforms have also been studied here to achieve higher spectral-efficiency (SE) in asynchronous environments. Full-duplex asynchronous quasi-gapless carrier aggregation scheme for MMW ROF inter-/intra-RAT based on the FBMC is also presented with 4G-LTE signals. Compared with OFDM-based signals with large guard-bands, FBMC achieves higher spectral-efficiency with better EVM performance at less received power and smaller guard-bands.

The ``Micro'' Aethalometer - an enabling technology for new applications in the measurement of Aerosol Black Carbon

Science.gov (United States)

Hansen, A. D.; Močnik, G.

2010-12-01

Aerosol Black Carbon (BC) is a tracer for combustion emissions; a primary indicator of adverse health effects; and the second leading contributor to Global Climate Change. The “Micro” Aethalometer is a recently-developed miniature instrument that makes a real-time measurement of BC on a very short timebase in a self-contained, battery-powered package that is lightweight and pocket sized. This technological development critically enables new areas of research: Measurements of the vertical profile of BC, by carrying the sampler aloft on a balloon (tethered or released) or aircraft (piloted or UAV); Estimates of the concentration of BC in the troposphere and lower stratosphere in the 8 - 12 km. altitude range, by measurements in the passenger cabin during commercial air travel; Epidemiological studies of personal exposure to BC, by carrying the sampler on a subject person in health studies; Measurements of the concentration of BC in rural and remote regions, by means of a small, battery-powered instrument that is convenient to deploy; measurements of high concentrations of “smoke” in indoor and outdoor environments in developing countries; Unobtrusive monitoring of BC infiltration into indoor environments, by means of a small, quiet instrument that can be placed in publicly-used spaces, school classrooms, museums, and other potentially-impacted locations; Adaptation of the technology to the direct source measurement of BC concentrations in emissions from diesel exhausts, combustion plumes, and other sources. We will show examples of data from various recent projects to illustrate the capabilities and applications of this new instrument.

Enabling Detailed Energy Analyses via the Technology Performance Exchange: Preprint

Energy Technology Data Exchange (ETDEWEB)

Studer, D.; Fleming, K.; Lee, E.; Livingood, W.

2014-08-01

One of the key tenets to increasing adoption of energy efficiency solutions in the built environment is improving confidence in energy performance. Current industry practices make extensive use of predictive modeling, often via the use of sophisticated hourly or sub-hourly energy simulation programs, to account for site-specific parameters (e.g., climate zone, hours of operation, and space type) and arrive at a performance estimate. While such methods are highly precise, they invariably provide less than ideal accuracy due to a lack of high-quality, foundational energy performance input data. The Technology Performance Exchange was constructed to allow the transparent sharing of foundational, product-specific energy performance data, and leverages significant, external engineering efforts and a modular architecture to efficiently identify and codify the minimum information necessary to accurately predict product energy performance. This strongly-typed database resource represents a novel solution to a difficult and established problem. One of the most exciting benefits is the way in which the Technology Performance Exchange's application programming interface has been leveraged to integrate contributed foundational data into the Building Component Library. Via a series of scripts, data is automatically translated and parsed into the Building Component Library in a format that is immediately usable to the energy modeling community. This paper (1) presents a high-level overview of the project drivers and the structure of the Technology Performance Exchange; (2) offers a detailed examination of how technologies are incorporated and translated into powerful energy modeling code snippets; and (3) examines several benefits of this robust workflow.

PEPSI-feed: linking PEPSI to the Vatican Advanced Technology Telescope using a 450m long fibre

Science.gov (United States)

Sablowski, D. P.; Weber, M.; Woche, M.; Ilyin, I.; Järvinen, A.; Strassmeier, K. G.; Gabor, P.

2016-07-01

Limited observing time at large telescopes equipped with the most powerful spectrographs makes it almost impossible to gain long and well-sampled time-series observations. Ditto, high-time-resolution observations of bright targets with high signal-to-noise are rare. By pulling an optical fibre of 450m length from the Vatican Advanced Technology Telescope (VATT) to the Large Binocular Telescope (LBT) to connect the Potsdam Echelle Polarimetric and Spectroscopic Instrument (PEPSI) to the VATT, allows for ultra-high resolution time-series measurements of bright targets. This article presents the fibre-link in detail from the technical point-of-view, demonstrates its performance from first observations, and sketches current applications.

Investigation of Advanced Propellants to Enable Single Stage to Orbit Launch Vehicles

Science.gov (United States)

2006-10-30

ERS-PAS-2006-205) 13. SUPPLEMENTARY NOTES Graduate work for California State University, Fresno 14. ABSTRACT Single-Stage-To-Orbit ( SSTO ...and maintained. Despite well-funded development efforts, no SSTO vehicles have been fielded to date. Existing chemical rocket and vehicle...technologies do not enable feasible SSTO designs. In the future, new propellants with advanced properties could enable SSTO launch vehicles. A parametric

Disruptive Technology: An Uncertain Future

Science.gov (United States)

2005-05-21

Technology that overturns market -- Military - Technology that causes a fundamental change in force structure, basing, and capability balance * Disruptive Technologies may arise from systems or enabling technology.

Technology-enhanced learning in transnational higher education.

Science.gov (United States)

Arunasalam, Nirmala

2016-11-24

Some university schools of nursing in Australia and the UK have developed collaborative links with Malaysia to deliver part-time Transnational Higher Education (TNHE) post-registration top-up nursing degree courses. It enables nurses trained to diploma level to upgrade to a degree qualification. The views of 18 Malaysian nurses who had studied with one Australian and two UK TNHE universities were explored using a hermeneutic phenomenological approach. Participants recruited via convenience and snowball sampling methods were interviewed in English and Bahasa Malaysia (Malaysian language). Thematic analysis were used to analyse data. Findings indicated nurses' frustration with technology-enhanced teaching and learning and a lack of support throughout the programme. Although nurses developed confidence in using computer technology, they remained disappointed with the level of academic support. The data and some useful strategies outlined provide important insights for TNHE providers, the Malaysian Nursing Board and private hospital employers to consider for enhancing nurses learning and experiences.

The Use of Collaboration, Authentic Learning, Linking Material to Personal Knowledge, and Technology in the Constructivist Classroom: Interviews with Community College Faculty Members

Science.gov (United States)

Zielinski, Dianne E.

2017-01-01

This study explored how faculty members implemented constructivist teaching methods after training. The student-centered teaching methods were interactions and collaborations, authentic learning and real-world experiences, linking material to previously learned information, and using technology in the classroom. Seven faculty members trained in…

Linked Registries: Connecting Rare Diseases Patient Registries through a Semantic Web Layer.

Science.gov (United States)

Sernadela, Pedro; González-Castro, Lorena; Carta, Claudio; van der Horst, Eelke; Lopes, Pedro; Kaliyaperumal, Rajaram; Thompson, Mark; Thompson, Rachel; Queralt-Rosinach, Núria; Lopez, Estrella; Wood, Libby; Robertson, Agata; Lamanna, Claudia; Gilling, Mette; Orth, Michael; Merino-Martinez, Roxana; Posada, Manuel; Taruscio, Domenica; Lochmüller, Hanns; Robinson, Peter; Roos, Marco; Oliveira, José Luís

2017-01-01

Patient registries are an essential tool to increase current knowledge regarding rare diseases. Understanding these data is a vital step to improve patient treatments and to create the most adequate tools for personalized medicine. However, the growing number of disease-specific patient registries brings also new technical challenges. Usually, these systems are developed as closed data silos, with independent formats and models, lacking comprehensive mechanisms to enable data sharing. To tackle these challenges, we developed a Semantic Web based solution that allows connecting distributed and heterogeneous registries, enabling the federation of knowledge between multiple independent environments. This semantic layer creates a holistic view over a set of anonymised registries, supporting semantic data representation, integrated access, and querying. The implemented system gave us the opportunity to answer challenging questions across disperse rare disease patient registries. The interconnection between those registries using Semantic Web technologies benefits our final solution in a way that we can query single or multiple instances according to our needs. The outcome is a unique semantic layer, connecting miscellaneous registries and delivering a lightweight holistic perspective over the wealth of knowledge stemming from linked rare disease patient registries.

Using Email to Enable E[superscript 3] (Effective, Efficient, and Engaging) Learning

Science.gov (United States)

Kim, ChanMin

2008-01-01

This article argues that technology that supports both noncognitive and cognitive aspects can make learning more effective, efficient, and engaging (e[superscript 3]-learning). The technology of interest in this article is email. The investigation focuses on characteristics of email that are likely to enable e[superscript 3]-learning. In addition,…

ESTABLISHING SUSTAINABLE US HEV/PHEV MANUFACTURING BASE: STABILIZED LITHIUM METAL POWDER, ENABLING MATERIAL AND REVOLUTIONARY TECHNOLOGY FOR HIGH ENERGY LI-ION BATTERIES

Energy Technology Data Exchange (ETDEWEB)

Yakovleva, Marina

2012-12-31

FMC Lithium Division has successfully completed the project “Establishing Sustainable US PHEV/EV Manufacturing Base: Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion Batteries”. The project included design, acquisition and process development for the production scale units to 1) produce stabilized lithium dispersions in oil medium, 2) to produce dry stabilized lithium metal powders, 3) to evaluate, design and acquire pilot-scale unit for alternative production technology to further decrease the cost, and 4) to demonstrate concepts for integrating SLMP technology into the Li- ion batteries to increase energy density. It is very difficult to satisfy safety, cost and performance requirements for the PHEV and EV applications. As the initial step in SLMP Technology introduction, industry can use commercially available LiMn2O4 or LiFePO4, for example, that are the only proven safer and cheaper lithium providing cathodes available on the market. Unfortunately, these cathodes alone are inferior to the energy density of the conventional LiCoO2 cathode and, even when paired with the advanced anode materials, such as silicon composite material, the resulting cell will still not meet the energy density requirements. We have demonstrated, however, if SLMP Technology is used to compensate for the irreversible capacity in the anode, the efficiency of the cathode utilization will be improved and the cost of the cell, based on the materials, will decrease.

How Information Technology Can Enable 21st Century Schools

Science.gov (United States)

Kolderie, Ted; McDonald; Tim

2009-01-01

In recent years, the information technology (IT) revolution has transformed American industry--leading to new types of work processes and business organizations, and increased productivity and consumer innovations--but by and large, this game-changer has bypassed America's schools. Virtually all K-12 schools in the country are connected to the…

A New Remote Communications Link to Reduce Residential PV Solar Costs

Energy Technology Data Exchange (ETDEWEB)

King, Randy [Operant Solar Corporation,CA (United States); Sugiyama, Rod [Operant Solar Corporation,CA (United States)

2017-12-11

Monitoring of PV/DER site production is expensive to install and unreliable. Among third party systems providers, lost communications links are a growing concern. Nearly 20% of links are failing, provisioning is complex, recovery is expensive, production data is lost, and access is fragmented. FleetLink is a new concept in DER system communications, purpose built for lowering the cost of maintaining active contact with residential end user sites and ensuring that production data is reliably available to third party systems providers. Systems providers require accurate, secure system monitoring and reporting of production data and system faults while driving down overall costs to compete effectively. This plug and play, independently operating communications solution lowers the cost of fleet contact from typically .08 dollars-$.12/W down to .02 dollars -.03/W including installation and maintenance expenses. FleetLink establishes a breakthrough in simplicity that facilitates rapid expansion of residential solar by reducing initial capital outlay and lowering installation labor time and skill levels. The solution also facilitates higher DER installation growth rates by driving down maintenance costs and eliminating communications trouble calls. This is accomplished by the FleetLink’s unique network technology that enables dynamic network configuration for fast changes, and active, self-healing DER site contact for uptime assurance. Using an open source network framework with proprietary, application specific enhancements, FleetLink independently manages connectivity, security, recovery, grid control communications, and fleet expansion while presenting a compliant SunSpec interface to the third party operations centers. The net system cost savings of at least .05 dollars/W supports the SunShot cost goals and the flexibility and scalability of the solution accelerates the velocity and ubiquitous adoption of solar.

Overview and Summary of the Advanced Mirror Technology Development Project

Science.gov (United States)

Stahl, H. P.

2014-01-01

Advanced Mirror Technology Development (AMTD) is a NASA Strategic Astrophysics Technology project to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. The developed mirror technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. Just as JWST’s architecture was driven by launch vehicle, a future UVOIR mission’s architectures (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, to provide the science community with options, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We derived engineering specifications for potential future monolithic or segmented space telescopes based on science needs and implement constraints. And we are maturing six inter-linked critical technologies to enable potential future large aperture UVOIR space telescope: 1) Large-Aperture, Low Areal Density, High Stiffness Mirrors, 2) Support Systems, 3) Mid/High Spatial Frequency Figure Error, 4) Segment Edges, 5) Segment-to-Segment Gap Phasing, and 6) Integrated Model Validation Science Advisory Team and a Systems Engineering Team. We are maturing all six technologies simultaneously because all are required to make a primary mirror assembly (PMA); and, it is the PMA’s on-orbit performance which determines science return. PMA stiffness depends on substrate and support stiffness. Ability to cost-effectively eliminate mid/high spatial figure errors and polishing edges depends on substrate stiffness. On-orbit thermal and mechanical performance depends on substrate stiffness, the coefficient of thermal expansion (CTE) and thermal mass. And, segment-to-segment phasing depends on substrate & structure stiffness

Context-Enabled Business Intelligence

Energy Technology Data Exchange (ETDEWEB)

Troy Hiltbrand

2012-04-01

To truly understand context and apply it in business intelligence, it is vital to understand what context is and how it can be applied in addressing organizational needs. Context describes the facets of the environment that impact the way that end users interact with the system. Context includes aspects of location, chronology, access method, demographics, social influence/ relationships, end-user attitude/ emotional state, behavior/ past behavior, and presence. To be successful in making Business Intelligence content enabled, it is important to be able to capture the context of use user. With advances in technology, there are a number of ways in which this user based information can be gathered and exposed to enhance the overall end user experience.

Power unit-cargo space link in transport

Directory of Open Access Journals (Sweden)

Radmilović Zoran R.

2005-01-01

Full Text Available This paper deals with transportation technology regarding links between power unit and cargo space. These links can be divided into two groups: rigid and flexible. Rigid link, established between power unit and cargo space, is dominant in maritime and road transport (sea ships and trucks, and occasionally in transport on inland waterways (self- propelled barges. Flexible link is used in the railroad transport (systems with trailers and semi trailers, and in inland waterway transport (push - towing and pulling systems, and combinations of the systems. The main goal of this research is determination of possible link types and organization of the means of transportation.

RFID-enabled healthcare applications, issues and benefits: an archival analysis (1997-2011).

Science.gov (United States)

Fosso Wamba, Samuel

2012-12-01

In this paper, a comprehensive review of articles published between 1997 and 2011 in the Journal of Medical Systems (JMS) on RFID technology is presented. A total of 22 papers are analyzed using a classification framework that has three dimensions: RFID-enabled healthcare applications, RFID-enabled healthcare issues, and RFID-enabled healthcare benefits. In addition, an invitation sent to all authors of the papers accepted for the special issue on RFID for the JMS allows them to position their various papers within the classification framework. Finally, a list of future research directions is presented.

Drugs + HIV, Learn the Link

Medline Plus

Full Text Available ... the Learn the Link message. Campaign messages and materials were tested among various groups of young people, guiding the use of technology, the discussion between friends, and the importance of family. For ...

BER and Availability Measured on FSO Link

Czech Academy of Sciences Publication Activity Database

Kvíčala, R.; Kvičera, V.; Grábner, M.; Fišer, Ondřej

2007-01-01

Roč. 16, č. 3 (2007), s. 7-12 ISSN 1210-2512 Grant - others:Ministry of research and technology(DE) 17050531 Institutional research plan: CEZ:AV0Z30420517 Keywords : free space optical links * quality of service * meteorological optical range * link unavailability * bit error rate Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

Linked data: un nuovo alfabeto del web semantico

Directory of Open Access Journals (Sweden)

Mauro Guerrini

2013-01-01

Full Text Available The paper defines the linked data as a set of best practices that are used to publish data on the web using a machine; the technology (or mode of realization of linked data is associated with the concept of the semantic web. It is the area of the semantic web, or web of data, as defined by Tim Berners-Lee "A web of things in the world, described by data on the web". The paper highlights the continuities and differences between semantic web and web traditional, or web documents. The analysis of linked data takes place within the world of libraries, archives and museums, traditionally committed to high standards for structuring and sharing of data. The data, in fact, assume the role of generating quality information for the network. The production of linked data requires compliance with rules and the use of specific technologies and languages, especially in the case of publication of linked data in open mode. The production cycle of linked data may be the track, or a guideline, for institutions that wish to join projects to publish their data. Data quality is assessed through a rating system designed by Tim Berners-Lee.

The technology management process at the European space agency

Science.gov (United States)

Guglielmi, M.; Williams, E.; Groepper, P.; Lascar, S.

2010-03-01

Technology is developed at the European Space Agency (ESA) under several programmes: corporate and domain specific, mandatory and optional, with different time horizons and covering different levels of the TRL scale. To improve the transparency and efficiency of the complete process, it was felt necessary to establish an agreed end to end process for the management of all technology R&D activity that could: Include all ESA programmes and consider the requirements of European users Lead to coordinated multi-year work plan and yearly procurement plans Prepare and enable future European space programmes Be harmonized with national initiatives in Europe Thereby establishing the basis for a product policy to reduce risks to technology users, reduce costs and delays, and enhance industrial competitiveness and non-dependence. In response to the above needs, ESA has developed a technology management process called the ESA End-to-End process (E2E), from establishment of the strategy to the monitoring and evaluation of R&D results. In this paper, the complete process will be described in detail including a discussion on its strengths and limitations, and its links to the wider European Harmonization process. The paper will be concluded with the introduction of the ESA Technology Tree: a basic tool to structure and facilitate communication about technology issues.

Enabling graphene nanoelectronics.

Energy Technology Data Exchange (ETDEWEB)

Pan, Wei; Ohta, Taisuke; Biedermann, Laura Butler; Gutierrez, Carlos; Nolen, C. M.; Howell, Stephen Wayne; Beechem Iii, Thomas Edwin; McCarty, Kevin F.; Ross, Anthony Joseph, III

2011-09-01

Recent work has shown that graphene, a 2D electronic material amenable to the planar semiconductor fabrication processing, possesses tunable electronic material properties potentially far superior to metals and other standard semiconductors. Despite its phenomenal electronic properties, focused research is still required to develop techniques for depositing and synthesizing graphene over large areas, thereby enabling the reproducible mass-fabrication of graphene-based devices. To address these issues, we combined an array of growth approaches and characterization resources to investigate several innovative and synergistic approaches for the synthesis of high quality graphene films on technologically relevant substrate (SiC and metals). Our work focused on developing the fundamental scientific understanding necessary to generate large-area graphene films that exhibit highly uniform electronic properties and record carrier mobility, as well as developing techniques to transfer graphene onto other substrates.

BIM: Enabling Sustainability and Asset Management through Knowledge Management

Directory of Open Access Journals (Sweden)

Robbert Anton Kivits

2013-01-01

Full Text Available Building Information Modeling (BIM is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

BIM: Enabling Sustainability and Asset Management through Knowledge Management

Science.gov (United States)

2013-01-01

Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry. PMID:24324392

Drugs + HIV, Learn the Link

Medline Plus

Full Text Available ... November 2017. How are Drug Misuse and HIV Related? Drug misuse and addiction have been linked with ... Campaign messages and materials were tested among various groups of young people, guiding the use of technology, ...

Massively parallel E-beam inspection: enabling next-generation patterned defect inspection for wafer and mask manufacturing

Science.gov (United States)

Malloy, Matt; Thiel, Brad; Bunday, Benjamin D.; Wurm, Stefan; Mukhtar, Maseeh; Quoi, Kathy; Kemen, Thomas; Zeidler, Dirk; Eberle, Anna Lena; Garbowski, Tomasz; Dellemann, Gregor; Peters, Jan Hendrik

2015-03-01

SEMATECH aims to identify and enable disruptive technologies to meet the ever-increasing demands of semiconductor high volume manufacturing (HVM). As such, a program was initiated in 2012 focused on high-speed e-beam defect inspection as a complement, and eventual successor, to bright field optical patterned defect inspection [1]. The primary goal is to enable a new technology to overcome the key gaps that are limiting modern day inspection in the fab; primarily, throughput and sensitivity to detect ultra-small critical defects. The program specifically targets revolutionary solutions based on massively parallel e-beam technologies, as opposed to incremental improvements to existing e-beam and optical inspection platforms. Wafer inspection is the primary target, but attention is also being paid to next generation mask inspection. During the first phase of the multi-year program multiple technologies were reviewed, a down-selection was made to the top candidates, and evaluations began on proof of concept systems. A champion technology has been selected and as of late 2014 the program has begun to move into the core technology maturation phase in order to enable eventual commercialization of an HVM system. Performance data from early proof of concept systems will be shown along with roadmaps to achieving HVM performance. SEMATECH's vision for moving from early-stage development to commercialization will be shown, including plans for development with industry leading technology providers.

Malaysian perspective on the contribution of nuclear science and technology to national development

Energy Technology Data Exchange (ETDEWEB)

Alang Md Rashid, Nahrul Khair [Unit Tenaga Nuklear, Bangi, Selangor (Malaysia)

1994-04-01

The development of nuclear science and technology in Malaysia began with the inception of The Nuclear Energy Unit (UTN) in 1972. In 1985, the Atomic Energy Licensing Board was set up as a regulatory body to enforce the Atomic Energy Licensing Act. Ten years after UTN`s establishment, the first of its major facilities, a one Megawatt TRIGA MkII nuclear research reactor (RTP), was commissioned. This is the first step of any type of nuclear reactor for Malaysia. The healthy development of peaceful uses of nuclear science and technology in malaysia has enabled UTN to acquire several other major facilities. These facilities support research and development, in line with UTN`s mission, viz, to enhance national development through the applications of nuclear science and technology. This paper describes selected activities at UTN and some of its successes in linking the results of research and development to real-world applications through services and/or technology transfers.

Malaysian perspective on the contribution of nuclear science and technology to national development

International Nuclear Information System (INIS)

Nahrul Khair Alang Md Rashid

1994-01-01

The development of nuclear science and technology in Malaysia began with the inception of The Nuclear Energy Unit (UTN) in 1972. In 1985, the Atomic Energy Licensing Board was set up as a regulatory body to enforce the Atomic Energy Licensing Act. Ten years after UTN's establishment, the first of its major facilities, a one Megawatt TRIGA MkII nuclear research reactor (RTP), was commissioned. This is the first step of any type of nuclear reactor for Malaysia. The healthy development of peaceful uses of nuclear science and technology in malaysia has enabled UTN to acquire several other major facilities. These facilities support research and development, in line with UTN's mission, viz, to enhance national development through the applications of nuclear science and technology. This paper describes selected activities at UTN and some of its successes in linking the results of research and development to real-world applications through services and/or technology transfers

Principles for enabling deep secondary design

DEFF Research Database (Denmark)

Pries-Heje, Jan; Hansen, Magnus Rotvit Perlt

2017-01-01

design by analyzing two cases where secondary designers fundamentally change functionality, content and technology complexity level. The first case redesigns a decision model for agile development in an insurance company; the second creates a contingency model for choosing project management tools...... and techniques in a hospital. Our analysis of the two cases leads to the identification of four principles of design implementation that primary designers can apply to enable secondary design and four corresponding design implementation principles that secondary designers themselves need to apply....

Enabling Chemistry Technologies and Parallel Synthesis-Accelerators of Drug Discovery Programmes.

Science.gov (United States)

Vasudevan, A; Bogdan, A R; Koolman, H F; Wang, Y; Djuric, S W

There is a pressing need to improve overall productivity in the pharmaceutical industry. Judicious investments in chemistry technologies can have a significant impact on cycle times, cost of goods and probability of technical success. This perspective describes some of these technologies developed and implemented at AbbVie, and their applications to the synthesis of novel scaffolds and to parallel synthesis. © 2017 Elsevier B.V. All rights reserved.

Value Co-creation and Co-innovation: Linking Networked Organisations and Customer Communities

Science.gov (United States)

Romero, David; Molina, Arturo

Strategic networks such as Collaborative Networked Organisations (CNOs) and Virtual Customer Communities (VCCs) show a high potential as drivers of value co-creation and collaborative innovation in today’s Networking Era. Both look at the network structures as a source of jointly value creation and open innovation through access to new skills, knowledge, markets and technologies by sharing risk and integrating complementary competencies. This collaborative endeavour has proven to be able to enhance the adaptability and flexibility of CNOs and VCCs value creating systems in order to react in response to external drivers such as collaborative (business) opportunities. This paper presents a reference framework for creating interface networks, also known as ‘experience-centric networks’, as enablers for linking networked organisations and customer communities in order to support the establishment of user-driven and collaborative innovation networks.

CMOS serial link for fully duplexed data communication

Science.gov (United States)

Lee, Kyeongho; Kim, Sungjoon; Ahn, Gijung; Jeong, Deog-Kyoon

1995-04-01

This paper describes a CMOS serial link allowing fully duplexed 500 Mbaud serial data communication. The CMOS serial link is a robust and low-cost solution to high data rate requirements. A central charge pump PLL for generating multiphase clocks for oversampling is shared by several serial link channels. Fully duplexed serial data communication is realized in the bidirectional bridge by separating incoming data from the mixed signal on the cable end. The digital PLL accomplishes process-independent data recovery by using a low-ratio oversampling, a majority voting, and a parallel data recovery scheme. Mostly, digital approach could extend its bandwidth further with scaled CMOS technology. A single channel serial link and a charge pump PLL are integrated in a test chip using 1.2 micron CMOS process technology. The test chip confirms upto 500 Mbaud unidirectional mode operation and 320 Mbaud fully duplexed mode operation with pseudo random data patterns.

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

International Nuclear Information System (INIS)

Moe, Wayne Leland

2015-01-01

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a ''critical path'' for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain ''minimum'' levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial ''first step'' in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by

Technology Transmission Across National Innovation Systems

DEFF Research Database (Denmark)

Haakonsson, Stine Jessen; Slepniov, Dmitrij

This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

Technology Transmission Across National Innovation Systems

DEFF Research Database (Denmark)

Haakonsson, Stine Jessen; Slepniov, Dmitrij

2018-01-01

This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

Measuring science–technology interactions using patent citations and author-inventor links: an exploration analysis from Chinese nanotechnology

International Nuclear Information System (INIS)

Wang Gangbo; Guan Jiancheng

2011-01-01

This article contributes to the growing study on the interactions between science and technology with China’s evidence in the field of nanotechnology, based on the database of United States Patent and Trademark Office. The analysis is focused during the period of 1991–2008, a rapid increasing period for the development of nanotechnology. Using the non-patent references cited by patents, we first investigate the science–technology connections in the context of Chinese nanotechnology, especially in institutional sectors and its application fields. Those patents, produced by academic researchers and directed towards basic scientific knowledge, generally cite more scientific references with a higher proportion of self-citations. It is interesting to find that patents contributed by collaborations between public organizations and corporations seldom contain scientific references. Following an interesting path on matching the data of publications and patents, we establish the author-inventor links in this emerging field. Author-inventors, who are co-active in publishing and patenting, are at the very top of the most prolific and highly cited researchers. Finally, we employ social network analysis to explore the characteristics of scientific and technological networks generated by co-authorship and co-invention data, to investigate the position and the role of patenting–publishing scientists in these research networks.

Technologies to Enable EDL of Smallsat Science and Exploration Payloads

Data.gov (United States)

National Aeronautics and Space Administration — The central objective of this research is to develop technologies for Entry, Descent, and Landing (EDL) of cubesat-sized vehicles. While current efforts tend toward...

Enabling Technology for Thermal Protection on HIAD and Other Hypersonic Missions, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — S. D. Miller and Associates proposes to investigate a new class of thermal insulations that will enable thermal protection systems (TPS) on ceramic matrix composite...

Innovative developments and managerial factors as key enablers of deepwater riser project delivery

OpenAIRE

Belik, Maxim

2016-01-01

Master's thesis in Offshore technology: industrial asset management The oil and gas industry is currently facing unprecedented challenges because of a negative impact from a declined commodity pricing trend. As the industry tackles deeper and more complex projects, the use of innovative technology to resolve technical challenges becomes an essential project enabler. Integrating proven designs and products with new technologies is a basic requirement in present business environment. Com...

Corrugated Two-dimensional Material Enabled Flexoelectricity for Cryogenic Actuator Technology

Data.gov (United States)

National Aeronautics and Space Administration — Next generation cryogenic actuator technology (CAT) calls for a wide range of operating temperatures from -296 °C (liquid He) to 116 °C (max on moon surface)....

Enabling Spacecraft Formation Flying through Position Determination, Control and Enhanced Automation Technologies

Science.gov (United States)

Bristow, John; Bauer, Frank; Hartman, Kate; How, Jonathan

2000-01-01

Formation Flying is revolutionizing the way the space community conducts science missions around the Earth and in deep space. This technological revolution will provide new, innovative ways for the community to gather scientific information, share that information between space vehicles and the ground, and expedite the human exploration of space. Once fully matured, formation flying will result in numerous sciencecraft acting as virtual platforms and sensor webs, gathering significantly more and better science data than call be collected today. To achieve this goal, key technologies must be developed including those that address the following basic questions posed by the spacecraft: Where am I? Where is the rest of the fleet? Where do I need to be? What do I have to do (and what am I able to do) to get there? The answers to these questions and the means to implement those answers will depend oil the specific mission needs and formation configuration. However, certain critical technologies are common to most formations. These technologies include high-precision position and relative-position knowledge including Global Positioning System (GPS) mid celestial navigation; high degrees of spacecraft autonomy inter-spacecraft communication capabilities; targeting and control including distributed control algorithms, and high precision control thrusters and actuators. This paper provides an overview of a selection of the current activities NASA/DoD/Industry/Academia are working to develop Formation Flying technologies as quickly as possible, the hurdles that need to be overcome to achieve our formation flying vision, and the team's approach to transfer this technology to space. It will also describe several of the formation flying testbeds, such as Orion and University Nanosatellites, that are being developed to demonstrate and validate many of these innovative sensing and formation control technologies.

Recommendation of standardized health learning contents using archetypes and semantic web technologies.

Science.gov (United States)

Legaz-García, María del Carmen; Martínez-Costa, Catalina; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás

2012-01-01

Linking Electronic Healthcare Records (EHR) content to educational materials has been considered a key international recommendation to enable clinical engagement and to promote patient safety. This would suggest citizens to access reliable information available on the web and to guide them properly. In this paper, we describe an approach in that direction, based on the use of dual model EHR standards and standardized educational contents. The recommendation method will be based on the semantic coverage of the learning content repository for a particular archetype, which will be calculated by applying semantic web technologies like ontologies and semantic annotations.

Accelerator mass spectrometry-enabled studies: current status and future prospects.

Science.gov (United States)

Arjomand, Ali

2010-03-01

Accelerator mass spectrometry is a detection platform with exceptional sensitivity compared with other bioanalytical platforms. Accelerator mass spectrometry (AMS) is widely used in archeology for radiocarbon dating applications. Early exploration of the biological and pharmaceutical applications of AMS began in the early 1990s. AMS has since demonstrated unique problem-solving ability in nutrition science, toxicology and pharmacology. AMS has also enabled the development of new applications, such as Phase 0 microdosing. Recent development of AMS-enabled applications has transformed this novelty research instrument to a valuable tool within the pharmaceutical industry. Although there is now greater awareness of AMS technology, recognition and appreciation of the range of AMS-enabled applications is still lacking, including study-design strategies. This review aims to provide further insight into the wide range of AMS-enabled applications. Examples of studies conducted over the past two decades will be presented, as well as prospects for the future of AMS.

Web-enabled video-feedback: a method to reflect on the communication skills of experienced physicians.

NARCIS (Netherlands)

Noordman, J.; Verhaak, P.; Dulmen, S. van

2011-01-01

OBJECTIVE: To describe our web-enabled video-feedback method designed to reflect on the communication skills of experienced physicians. METHODS: Participating physicians (n=28) received a 'personal web link' to two of their video-recorded consultations. After watching the consultations physicians

Stratified charge rotary aircraft engine technology enablement program

Science.gov (United States)

Badgley, P. R.; Irion, C. E.; Myers, D. M.

1985-01-01

The multifuel stratified charge rotary engine is discussed. A single rotor, 0.7L/40 cu in displacement, research rig engine was tested. The research rig engine was designed for operation at high speeds and pressures, combustion chamber peak pressure providing margin for speed and load excursions above the design requirement for a high is advanced aircraft engine. It is indicated that the single rotor research rig engine is capable of meeting the established design requirements of 120 kW, 8,000 RPM, 1,379 KPA BMEP. The research rig engine, when fully developed, will be a valuable tool for investigating, advanced and highly advanced technology components, and provide an understanding of the stratified charge rotary engine combustion process.

Interchip link system using an optical wiring method.

Science.gov (United States)

Cho, In-Kui; Ryu, Jin-Hwa; Jeong, Myung-Yung

2008-08-15

A chip-scale optical link system is presented with a transmitter/receiver and optical wire link. The interchip link system consists of a metal optical bench, a printed circuit board module, a driver/receiver integrated circuit, a vertical cavity surface-emitting laser/photodiode array, and an optical wire link composed of plastic optical fibers (POFs). We have developed a downsized POF and an optical wiring method that allows on-site installation with a simple annealing as optical wiring technologies for achieving high-density optical interchip interconnection within such devices. Successful data transfer measurements are presented.

Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education

Science.gov (United States)

Meletiou-Mavrotheris, Maria, Ed.; Mavrou, Katerina, Ed.; Paparistodemou, Efi, Ed.

2015-01-01

Despite increased interest in mobile devices as learning tools, the amount of available primary research studies on their integration into mathematics teaching and learning is still relatively small due to the novelty of these technologies. "Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education" presents…

Atomic layer deposition: an enabling technology for the growth of functional nanoscale semiconductors

Science.gov (United States)

Biyikli, Necmi; Haider, Ali

2017-09-01

In this paper, we present the progress in the growth of nanoscale semiconductors grown via atomic layer deposition (ALD). After the adoption by semiconductor chip industry, ALD became a widespread tool to grow functional films and conformal ultra-thin coatings for various applications. Based on self-limiting and ligand-exchange-based surface reactions, ALD enabled the low-temperature growth of nanoscale dielectric, metal, and semiconductor materials. Being able to deposit wafer-scale uniform semiconductor films at relatively low-temperatures, with sub-monolayer thickness control and ultimate conformality, makes ALD attractive for semiconductor device applications. Towards this end, precursors and low-temperature growth recipes are developed to deposit crystalline thin films for compound and elemental semiconductors. Conventional thermal ALD as well as plasma-assisted and radical-enhanced techniques have been exploited to achieve device-compatible film quality. Metal-oxides, III-nitrides, sulfides, and selenides are among the most popular semiconductor material families studied via ALD technology. Besides thin films, ALD can grow nanostructured semiconductors as well using either template-assisted growth methods or bottom-up controlled nucleation mechanisms. Among the demonstrated semiconductor nanostructures are nanoparticles, nano/quantum-dots, nanowires, nanotubes, nanofibers, nanopillars, hollow and core-shell versions of the afore-mentioned nanostructures, and 2D materials including transition metal dichalcogenides and graphene. ALD-grown nanoscale semiconductor materials find applications in a vast amount of applications including functional coatings, catalysis and photocatalysis, renewable energy conversion and storage, chemical sensing, opto-electronics, and flexible electronics. In this review, we give an overview of the current state-of-the-art in ALD-based nanoscale semiconductor research including the already demonstrated and future applications.

Bluetooth enables in-door mobile location services

OpenAIRE

Thongthammachart, Saowanee; Olesen, Henning

2003-01-01

Several technologies can be applied to enable mobile location services, but most of them suffer from limited accuracy and availability. GPS can solve the problem of determining the location of users in most outdoor situations, but an end-user position inside a building cannot be pinpointed. Other mobile location techniques can also provide the user's position, but the accuracy is rather low. In order to improve the accuracy and make location-based services really attractive, existing approach...

A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

Directory of Open Access Journals (Sweden)

Mahdi Iran-nejad-parizi

2013-01-01

Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

A Single-use Strategy to Enable Manufacturing of Affordable Biologics

Directory of Open Access Journals (Sweden)

Renaud Jacquemart

2016-01-01

Full Text Available The current processing paradigm of large manufacturing facilities dedicated to single product production is no longer an effective approach for best manufacturing practices. Increasing competition for new indications and the launch of biosimilars for the monoclonal antibody market have put pressure on manufacturers to produce at lower cost. Single-use technologies and continuous upstream processes have proven to be cost-efficient options to increase biomass production but as of today the adoption has been only minimal for the purification operations, partly due to concerns related to cost and scale-up. This review summarizes how a single-use holistic process and facility strategy can overcome scale limitations and enable cost-efficient manufacturing to support the growing demand for affordable biologics. Technologies enabling high productivity, right-sized, small footprint, continuous, and automated upstream and downstream operations are evaluated in order to propose a concept for the flexible facility of the future.

Investigation towards link-enriched video: user information needs for environmental opinion-forming and decision-making

NARCIS (Netherlands)

A.C. Palumbo

2012-01-01

htmlabstractLink-enriched video can support users in processes of environmental opinion-forming and decision-making. For this, audiovisual content must be represented and annotated to enable automatic link generation and computer manipulation. Given the time and budget constraints of

Down-conversion IM-DD RF photonic link utilizing MQW MZ modulator.

Science.gov (United States)

Xu, Longtao; Jin, Shilei; Li, Yifei

2016-04-18

We present the first down-conversion intensity modulated-direct detection (IM-DD) RF photonic link that achieves frequency down-conversion using the nonlinear optical phase modulation inside a Mach-Zehnder (MZ) modulator. The nonlinear phase modulation is very sensitive and it can enable high RF-to-IF conversion efficiency. Furthermore, the link linearity is enhanced by canceling the nonlinear distortions from the nonlinear phase modulation and the MZ interferometer. Proof-of-concept measurement was performed. The down-conversion IM-DD link demonstrated 28dB improvement in distortion levels over that of a conventional IM-DD link using a LiNbO3 MZ modulator.

Soft-linking energy systems and GIS models to investigate spatial hydrogen infrastructure development in a low-carbon UK energy system

International Nuclear Information System (INIS)

Strachan, Neil; Hughes, Nick; Balta-Ozkan, Nazmiye; McGeevor, Kate; Joffe, David

2009-01-01

This paper describes an innovative modelling approach focusing on linking spatial (GIS) modelling of hydrogen (H 2 ) supply, demands and infrastructures, anchored within a economy-wide energy systems model (MARKAL). The UK government is legislating a groundbreaking climate change mitigation target for a 60% CO 2 reduction by 2050, and has identified H 2 infrastructures and technologies as potentially playing a major role, notably in the transport sector. An exploratory set of linked GIS-MARKAL model scenarios generate a range of nuanced insights including spatial matching of supply and demand for optimal zero-carbon H 2 deployment, a crucial finding on successive clustering of demand centres to enable economies of scale in H 2 supply and distribution, the competitiveness of imported liquid H 2 and of liquid H 2 distribution, and sectoral competition for coal with carbon sequestration between electricity and H 2 production under economy-wide CO 2 constraints. (author)

Linking theory to practice in learning technology research

Directory of Open Access Journals (Sweden)

Cathy Gunn

2012-03-01

Full Text Available We present a case to reposition theory so that it plays a pivotal role in learning technology research and helps to build an ecology of learning. To support the case, we present a critique of current practice based on a review of articles published in two leading international journals from 2005 to 2010. Our study reveals that theory features only incidentally or not at all in many cases. We propose theory development as a unifying theme for learning technology research study design and reporting. The use of learning design as a strategy to develop and test theories in practice is integral to our argument. We conclude by supporting other researchers who recommend educational design research as a theory focused methodology to move the field forward in productive and consistent ways. The challenge of changing common practice will be involved. However, the potential to raise the profile of learning technology research and improve educational outcomes justifies the effort required.

A study of 60 Gigahertz intersatellite link applications

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

A study of 60 GHz intersatellite link applications

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

A study of 60 Gigahertz intersatellite link applications

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

1983-01-01

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

A study of 60 GHz intersatellite link applications

Science.gov (United States)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

1983-01-01

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

Linking theory to practice in learning technology research

OpenAIRE

Cathy Gunn; Caroline Steel

2012-01-01

We present a case to reposition theory so that it plays a pivotal role in learning technology research and helps to build an ecology of learning. To support the case, we present a critique of current practice based on a review of articles published in two leading international journals from 2005 to 2010. Our study reveals that theory features only incidentally or not at all in many cases. We propose theory development as a unifying theme for learning technology research study design and repor...

Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange

Science.gov (United States)

Haynes, Brian D.

2015-01-01

Technology Candidates for Air-to-Air and Air-to-Ground Data Exchange is a two-year research effort to visualize the U. S. aviation industry at a point 50 years in the future, and to define potential communication solutions to meet those future data exchange needs. The research team, led by XCELAR, was tasked with identifying future National Airspace System (NAS) scenarios, determining requirements and functions (including gaps), investigating technical and business issues for air, ground, & air-to-ground interactions, and reporting on the results. The project was conducted under technical direction from NASA and in collaboration with XCELAR's partner, National Institute of Aerospace, and NASA technical representatives. Parallel efforts were initiated to define the information exchange functional needs of the future NAS, and specific communication link technologies to potentially serve those needs. Those efforts converged with the mapping of each identified future NAS function to potential enabling communication solutions; those solutions were then compared with, and ranked relative to, each other on a technical basis in a structured analysis process. The technical solutions emerging from that process were then assessed from a business case perspective to determine their viability from a real-world adoption and deployment standpoint. The results of that analysis produced a proposed set of future solutions and most promising candidate technologies. Gap analyses were conducted at two points in the process, the first examining technical factors, and the second as part of the business case analysis. In each case, no gaps or unmet needs were identified in applying the solutions evaluated to the requirements identified. The future communication solutions identified in the research comprise both specific link technologies and two enabling technologies that apply to most or all specific links. As a result, the research resulted in a new analysis approach, viewing the

Increasing consumerism in healthcare through intelligent information technology.

Science.gov (United States)

Cohen, Seth B; Grote, Kurt D; Pietraszek, Wayne E; Laflamme, Francois

2010-12-01

In healthcare, consumerism is not a product or program. Instead, it is an orientation to new care delivery models that encourage and enable greater patient responsibility through the intelligent use of information technology. Despite the promise of consumerism, current approaches have not fully realized the potential benefits of improved outcomes and lower cost. We recommend 4 guiding principles to ensure that next-generation innovation yields the returns that providers, patients, and other stakeholders expect: (1) keep the consumer at the center of innovation, (2) keep it simple, (3) link products and services to a broader "ecosystem" of care, and (4) encourage health in addition to treating illness. Now may be a particularly compelling time to invest in a consumerist approach.

ESIM_DSN Web-Enabled Distributed Simulation Network

Science.gov (United States)

Bedrossian, Nazareth; Novotny, John

2002-01-01

In this paper, the eSim(sup DSN) approach to achieve distributed simulation capability using the Internet is presented. With this approach a complete simulation can be assembled from component subsystems that run on different computers. The subsystems interact with each other via the Internet The distributed simulation uses a hub-and-spoke type network topology. It provides the ability to dynamically link simulation subsystem models to different computers as well as the ability to assign a particular model to each computer. A proof-of-concept demonstrator is also presented. The eSim(sup DSN) demonstrator can be accessed at http://www.jsc.draper.com/esim which hosts various examples of Web enabled simulations.

Simulation enabled safeguards assessment methodology

International Nuclear Information System (INIS)

Bean, Robert; Bjornard, Trond; Larson, Tom

2007-01-01

It is expected that nuclear energy will be a significant component of future supplies. New facilities, operating under a strengthened international nonproliferation regime will be needed. There is good reason to believe virtual engineering applied to the facility design, as well as to the safeguards system design will reduce total project cost and improve efficiency in the design cycle. Simulation Enabled Safeguards Assessment MEthodology has been developed as a software package to provide this capability for nuclear reprocessing facilities. The software architecture is specifically designed for distributed computing, collaborative design efforts, and modular construction to allow step improvements in functionality. Drag and drop wire-frame construction allows the user to select the desired components from a component warehouse, render the system for 3D visualization, and, linked to a set of physics libraries and/or computational codes, conduct process evaluations of the system they have designed. (authors)

Simulation Enabled Safeguards Assessment Methodology

International Nuclear Information System (INIS)

Robert Bean; Trond Bjornard; Thomas Larson

2007-01-01

It is expected that nuclear energy will be a significant component of future supplies. New facilities, operating under a strengthened international nonproliferation regime will be needed. There is good reason to believe virtual engineering applied to the facility design, as well as to the safeguards system design will reduce total project cost and improve efficiency in the design cycle. Simulation Enabled Safeguards Assessment Methodology (SESAME) has been developed as a software package to provide this capability for nuclear reprocessing facilities. The software architecture is specifically designed for distributed computing, collaborative design efforts, and modular construction to allow step improvements in functionality. Drag and drop wireframe construction allows the user to select the desired components from a component warehouse, render the system for 3D visualization, and, linked to a set of physics libraries and/or computational codes, conduct process evaluations of the system they have designed

Remote communications technology redefines integrity verification and monitoring of low pressure isolation

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-01-15

In 2007, a ship collided with the southeast face of a satellite platform jacket in the North Sea, damaging the 12-inch export riser. Emergency shutdown valves immediately shut-in production from the platform, leaving the pressure in the pipeline at approximately 4 barg. The riser had to be repaired before production could resume. TDW Offshore Services (TDW) was hired to develop a low pressure solution to isolate the damaged section of the pipeline riser from the export pipeline gas inventory. TDW used its range of specialist pipeline pigging, pig tracking and remote communications technology to solve the problem. The solution consisted of a custom-designed TDW pig trap and pigging spread; a high friction pig train furnished with the SmartTrack remote tracking and pressure-monitoring system; a SmartTrack subsea remote tracking and pressure-monitoring system; a SmartTrack topside tracking and monitoring system with radio link to the dive support vessel; and a pipeline isolation ball valve. TDW was able to monitor the downstream pressure of each isolation pig continuously throughout the operation using its innovative technology that sends isolation integrity data by radio link to a dive support vessel through pipe wall communications. The use of remote tracking and pressure monitoring technology enabled TDW to make repairs to the damaged riser while maintaining a continuous flow throughout the duration of the operation. 4 figs.

Double-Loop Health Technology: Enabling Socio-technical Design of Personal Health Technology in Clinical Practice

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Frost, Mads

2018-01-01

present a case of designing personal health technology for mental health, which is integrated into hospital-based treatment. This system helps patients to manage their disease by tracking and correlation behavior and disease progression and provide feedback to them, while also deployed as part......Personal health technology is rapidly emerging as a response to the challenges associated with significant increase in chronic noncommunicable diseases. The overall design paradigm behind most of these applications is to manually and automatically sample data from sensors and smartphones and use...... this to provide patients with an awareness of their illness and give recommendation for treatment, care, and healthy living. Few of these systems are, however, designed to be part of a complex socio-technical care and treatment processes in existing healthcare systems and clinical pathways. In this chapter, we...

Thiol-linked alkylation of RNA to assess expression dynamics.

Science.gov (United States)

Herzog, Veronika A; Reichholf, Brian; Neumann, Tobias; Rescheneder, Philipp; Bhat, Pooja; Burkard, Thomas R; Wlotzka, Wiebke; von Haeseler, Arndt; Zuber, Johannes; Ameres, Stefan L

2017-12-01

Gene expression profiling by high-throughput sequencing reveals qualitative and quantitative changes in RNA species at steady state but obscures the intracellular dynamics of RNA transcription, processing and decay. We developed thiol(SH)-linked alkylation for the metabolic sequencing of RNA (SLAM seq), an orthogonal-chemistry-based RNA sequencing technology that detects 4-thiouridine (s 4 U) incorporation in RNA species at single-nucleotide resolution. In combination with well-established metabolic RNA labeling protocols and coupled to standard, low-input, high-throughput RNA sequencing methods, SLAM seq enabled rapid access to RNA-polymerase-II-dependent gene expression dynamics in the context of total RNA. We validated the method in mouse embryonic stem cells by showing that the RNA-polymerase-II-dependent transcriptional output scaled with Oct4/Sox2/Nanog-defined enhancer activity, and we provide quantitative and mechanistic evidence for transcript-specific RNA turnover mediated by post-transcriptional gene regulatory pathways initiated by microRNAs and N 6 -methyladenosine. SLAM seq facilitates the dissection of fundamental mechanisms that control gene expression in an accessible, cost-effective and scalable manner.

Grid Enabled Geospatial Catalogue Web Service

Science.gov (United States)

Chen, Ai-Jun; Di, Li-Ping; Wei, Ya-Xing; Liu, Yang; Bui, Yu-Qi; Hu, Chau-Min; Mehrotra, Piyush

2004-01-01

Geospatial Catalogue Web Service is a vital service for sharing and interoperating volumes of distributed heterogeneous geospatial resources, such as data, services, applications, and their replicas over the web. Based on the Grid technology and the Open Geospatial Consortium (0GC) s Catalogue Service - Web Information Model, this paper proposes a new information model for Geospatial Catalogue Web Service, named as GCWS which can securely provides Grid-based publishing, managing and querying geospatial data and services, and the transparent access to the replica data and related services under the Grid environment. This information model integrates the information model of the Grid Replica Location Service (RLS)/Monitoring & Discovery Service (MDS) with the information model of OGC Catalogue Service (CSW), and refers to the geospatial data metadata standards from IS0 19115, FGDC and NASA EOS Core System and service metadata standards from IS0 191 19 to extend itself for expressing geospatial resources. Using GCWS, any valid geospatial user, who belongs to an authorized Virtual Organization (VO), can securely publish and manage geospatial resources, especially query on-demand data in the virtual community and get back it through the data-related services which provide functions such as subsetting, reformatting, reprojection etc. This work facilitates the geospatial resources sharing and interoperating under the Grid environment, and implements geospatial resources Grid enabled and Grid technologies geospatial enabled. It 2!so makes researcher to focus on science, 2nd not cn issues with computing ability, data locztic, processir,g and management. GCWS also is a key component for workflow-based virtual geospatial data producing.

Collaborative Visualization Project: shared-technology learning environments for science learning

Science.gov (United States)

Pea, Roy D.; Gomez, Louis M.

1993-01-01

Project-enhanced science learning (PESL) provides students with opportunities for `cognitive apprenticeships' in authentic scientific inquiry using computers for data-collection and analysis. Student teams work on projects with teacher guidance to develop and apply their understanding of science concepts and skills. We are applying advanced computing and communications technologies to augment and transform PESL at-a-distance (beyond the boundaries of the individual school), which is limited today to asynchronous, text-only networking and unsuitable for collaborative science learning involving shared access to multimedia resources such as data, graphs, tables, pictures, and audio-video communication. Our work creates user technology (a Collaborative Science Workbench providing PESL design support and shared synchronous document views, program, and data access; a Science Learning Resource Directory for easy access to resources including two-way video links to collaborators, mentors, museum exhibits, media-rich resources such as scientific visualization graphics), and refine enabling technologies (audiovisual and shared-data telephony, networking) for this PESL niche. We characterize participation scenarios for using these resources and we discuss national networked access to science education expertise.

Linking Consumer Rights with Citizen Roles: An Opportunity for Consumer Educators.

Science.gov (United States)

Stevens, Georgia L.

1994-01-01

Consumer educators can help students develop consumer/citizen roles through curricula linking consumer rights with citizen responsibilities. Dialogue about issues, community needs assessment, and community volunteer service enable students to practice citizen roles. (SK)

Beam shaping as an enabler for new applications

Science.gov (United States)

Guertler, Yvonne; Kahmann, Max; Havrilla, David

2017-02-01

For many years, laser beam shaping has enabled users to achieve optimized process results as well as manage challenging applications. The latest advancements in industrial lasers and processing optics have taken this a step further as users are able to adapt the beam shape to meet specific application requirements in a very flexible way. TRUMPF has developed a wide range of experience in creating beam profiles at the work piece for optimized material processing. This technology is based on the physical model of wave optics and can be used with ultra short pulse lasers as well as multi-kW cw lasers. Basically, the beam shape can be adapted in all three dimensions in space, which allows maximum flexibility. Besides adaption of intensity profile, even multi-spot geometries can be produced. This approach is very cost efficient, because a standard laser source and (in the case of cw lasers) a standard fiber can be used without any special modifications. Based on this innovative beam shaping technology, TRUMPF has developed new and optimized processes. Two of the most recent application developments using these techniques are cutting glass and synthetic sapphire with ultra-short pulse lasers and enhanced brazing of hot dip zinc coated steel for automotive applications. Both developments lead to more efficient and flexible production processes, enabled by laser technology and open the door to new opportunities. They also indicate the potential of beam shaping techniques since they can be applied to both single-mode laser sources (TOP Cleave) and multi-mode laser sources (brazing).

Tongue-operated assistive technology with access to common smartphone applications via Bluetooth link.

Science.gov (United States)

Kim, Jeonghee; Park, Hangue; Ghovanloo, Maysam

2012-01-01

Tongue Drive System (TDS) is a wireless and wearable assistive technology (AT) that enables people with severe disabilities to control their computers, wheelchairs, and electronic gadgets using their tongue motion. We developed the TDS to control smartphone's (iPhone/iPod Touch) built-in and downloadable apps with a customized Bluetooth mouse module by emulating finger taps on the touchscreen. The TDS-iPhone Bluetooth mouse interface was evaluated by four able-bodied subjects to complete a scenario consisting of seven tasks, which were randomly ordered by using touch on the iPhone screen with index finger, a computer mouse on iPhone, and TDS-iPhone Bluetooth mouse interface with tongue motion. Preliminary results show that the average completion times of a scenario with touch, mouse, and TDS are 165.6 ± 14.50 s, 186.1 ± 15.37 s, and 651.6 ± 113.4 s, respectively, showing that the TDS is 84.37% and 81.16% slower than touch and mouse for speed of typing with negligible errors. Overall, considering the limited number of commands and unfamiliarity of the subjects with the TDS, we achieved acceptable results for hands-free functionality.

Synthetic Biology as an Enabling Technology for Space Exploration

Science.gov (United States)

Rothschild, Lynn J.

2016-01-01

Human exploration off planet is severely limited by the cost of launching materials into space and by re-supply. Thus materials brought from Earth must be light, stable and reliable at destination. Using traditional approaches, a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because life can replicate and repair itself, and perform a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology enhances and expands life's evolved repertoire. Using organisms as feedstock, additive manufacturing through bioprinting will make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. This new approach and the resulting novel products will enable human exploration and settlement on Mars, while providing new manufacturing approaches for life on Earth.

Linking Disparate Datasets of the Earth Sciences with the SemantEco Annotator

Science.gov (United States)

Seyed, P.; Chastain, K.; McGuinness, D. L.

2013-12-01

Use of Semantic Web technologies for data management in the Earth sciences (and beyond) has great potential but is still in its early stages, since the challenges of translating data into a more explicit or semantic form for immediate use within applications has not been fully addressed. In this abstract we help address this challenge by introducing the SemantEco Annotator, which enables anyone, regardless of expertise, to semantically annotate tabular Earth Science data and translate it into linked data format, while applying the logic inherent in community-standard vocabularies to guide the process. The Annotator was conceived under a desire to unify dataset content from a variety of sources under common vocabularies, for use in semantically-enabled web applications. Our current use case employs linked data generated by the Annotator for use in the SemantEco environment, which utilizes semantics to help users explore, search, and visualize water or air quality measurement and species occurrence data through a map-based interface. The generated data can also be used immediately to facilitate discovery and search capabilities within 'big data' environments. The Annotator provides a method for taking information about a dataset, that may only be known to its maintainers, and making it explicit, in a uniform and machine-readable fashion, such that a person or information system can more easily interpret the underlying structure and meaning. Its primary mechanism is to enable a user to formally describe how columns of a tabular dataset relate and/or describe entities. For example, if a user identifies columns for latitude and longitude coordinates, we can infer the data refers to a point that can be plotted on a map. Further, it can be made explicit that measurements of 'nitrate' and 'NO3-' are of the same entity through vocabulary assignments, thus more easily utilizing data sets that use different nomenclatures. The Annotator provides an extensive and searchable

Elckerlyc goes mobile: enabling technology for ECAs in mobile applications

NARCIS (Netherlands)

Klaassen, Randy; Hendrix, J.; Reidsma, Dennis; op den Akker, Hendrikus J.A.

2012-01-01

The fast growth of computational resources and speech technology available on mobile devices makes it pos- sible for users of these devices to interact with service sys- tems through natural dialogue. These systems are sometimes perceived as social agents and presented by means of an animated

Applications of Emerging Parallel Optical Link Technology to High Energy Physics Experiments

International Nuclear Information System (INIS)

Chramowicz, J.; Kwan, S.; Prosser, A.; Winchell, M.

2011-01-01

Modern particle detectors depend upon optical fiber links to deliver event data to upstream trigger and data processing systems. Future detector systems can benefit from the development of dense arrangements of high speed optical links emerging from the telecommunications and storage area network market segments. These links support data transfers in each direction at rates up to 120 Gbps in packages that minimize or even eliminate edge connector requirements. Emerging products include a class of devices known as optical engines which permit assembly of the optical transceivers in close proximity to the electrical interfaces of ASICs and FPGAs which handle the data in parallel electrical format. Such assemblies will reduce required printed circuit board area and minimize electromagnetic interference and susceptibility. We will present test results of some of these parallel components and report on the development of pluggable FPGA Mezzanine Cards equipped with optical engines to provide to collaborators on the Versatile Link Common Project for the HI-LHC at CERN.

Advanced Information Technology Investments at the NASA Earth Science Technology Office

Science.gov (United States)

Clune, T.; Seablom, M. S.; Moe, K.

2012-12-01

The NASA Earth Science Technology Office (ESTO) regularly makes investments for nurturing advanced concepts in information technology to enable rapid, low-cost acquisition, processing and visualization of Earth science data in support of future NASA missions and climate change research. In 2012, the National Research Council published a mid-term assessment of the 2007 decadal survey for future spacemissions supporting Earth science and applications [1]. The report stated, "Earth sciences have advanced significantly because of existing observational capabilities and the fruit of past investments, along with advances in data and information systems, computer science, and enabling technologies." The report found that NASA had responded favorably and aggressively to the decadal survey and noted the role of the recent ESTO solicitation for information systems technologies that partnered with the NASA Applied Sciences Program to support the transition into operations. NASA's future missions are key stakeholders for the ESTO technology investments. Also driving these investments is the need for the Agency to properly address questions regarding the prediction, adaptation, and eventual mitigation of climate change. The Earth Science Division has championed interdisciplinary research, recognizing that the Earth must be studied as a complete system in order toaddress key science questions [2]. Information technology investments in the low-mid technology readiness level (TRL) range play a key role in meeting these challenges. ESTO's Advanced Information Systems Technology (AIST) program invests in higher risk / higher reward technologies that solve the most challenging problems of the information processing chain. This includes the space segment, where the information pipeline begins, to the end user, where knowledge is ultimatelyadvanced. The objectives of the program are to reduce the risk, cost, size, and development time of Earth Science space-based and ground

Spreading the rooftop revolution: What policies enable solar-as-a-service?

International Nuclear Information System (INIS)

Overholm, Harald

2015-01-01

Firms using third-party-ownership (TPO) business models transform solar rooftop installations into a simple service. TPO firms sign long-term agreements with building owners or users to install, finance and manage locally sited solar panels. Customers simply buy solar electricity. The business model can increase total PV market demand by removing central barriers to PV adoption including technology risk, financing needs, and learning costs. TPO is now the dominant US model for residential solar and attempts to use the business model are underway in Europe and Asia. This study discusses how policy makers can enable emergence of solar TPO business models in new markets, a theme novel to extant literature. The paper is based on a comprehensive study of the US solar TPO ecosystem including 50 interviews with key market actors. A downside to the TPO model is potential lock-out of innovative solar technology. Crucial policy actions to enable TPO emergence in new markets are to ensure the legality of the TPO model and to facilitate solar self-consumption (the ability of customers to offset grid electricity costs by using locally generated solar electricity). -- Highlights: •Solar third-party ownership (TPO) firms can boost solar rooftop growth. •5 in-depth cases of US TPO firms and their ecosystem of partners are analyzed. •Policy options to enable solar TPO emergence in new markets are suggested. •Avoiding prohibitive rules and facilitating solar self-consumption are key measures. •Lock-out of new and innovative solar technology is a downside to the TPO model

Enabling information sharing in a port

DEFF Research Database (Denmark)

Olesen, Peter Bjerg; Hvolby, Hans-Henrik; Dukovska-Popovska, Iskra

2012-01-01

Ports are integral parts of many supply chains and are as such a contributing factor to the overall efficiency of the supply chain. Ports are also dynamic entities where things changes continuously. The dynamic nature of ports is also a problem when trying to optimise the utilisation of resources...... and ensure a low lead-time. Information sharing is a very important tool to reduce the effect of dynamism. This paper attempts to explain how information sharing is enabled in such an environment, and which considerations are relevant, both in regards to the information and required technology. The paper...

Enabling distributed petascale science

International Nuclear Information System (INIS)

Baranovski, Andrew; Bharathi, Shishir; Bresnahan, John

2007-01-01

Petascale science is an end-to-end endeavour, involving not only the creation of massive datasets at supercomputers or experimental facilities, but the subsequent analysis of that data by a user community that may be distributed across many laboratories and universities. The new SciDAC Center for Enabling Distributed Petascale Science (CEDPS) is developing tools to support this end-to-end process. These tools include data placement services for the reliable, high-performance, secure, and policy-driven placement of data within a distributed science environment; tools and techniques for the construction, operation, and provisioning of scalable science services; and tools for the detection and diagnosis of failures in end-to-end data placement and distributed application hosting configurations. In each area, we build on a strong base of existing technology and have made useful progress in the first year of the project. For example, we have recently achieved order-of-magnitude improvements in transfer times (for lots of small files) and implemented asynchronous data staging capabilities; demonstrated dynamic deployment of complex application stacks for the STAR experiment; and designed and deployed end-to-end troubleshooting services. We look forward to working with SciDAC application and technology projects to realize the promise of petascale science

Linked Data - the story so far

OpenAIRE

Bizer, Christian; Heath, Tom; Berners-Lee, Tim

2009-01-01

The term “Linked Data” refers to a set of best practices for publishing and connecting structured data on the Web. These best practices have been adopted by an increasing number of data providers over the last three years, leading to the creation of a global data space containing billions of assertions— the Web of Data. In this article, the authors present the concept and technical principles of Linked Data, and situate these within the broader context of related technological developments. T...

Photocrosslinker technology: An antimicrobial efficacy of cinnamaldehyde cross-linked low-density polyethylene (Cin-C-LDPE) as a novel food wrapper.

Science.gov (United States)

Manukumar, H M; Umesha, S

2017-12-01

In recent years much attention has been devoted to active packaging technologies that offer new opportunities for the food industry and food preservation. The spoilage of food products during post process handling leads to food contamination and causes life-threatening food-borne illness. The methicillin-resistant Staphylococcus aureus (MRSA) 090 is one of the food-borne pathogens associated with food poisoning that leads to an outbreak of perilous human infections worldwide. The development of resistance in bacteria and diffusion of coated synthetic preservatives into food are the major problem in food packaging industries. In the present work, we have developed a new food wrap method by cross-linking cinnamaldehyde on low-density polyethylene (Cin-C-LDPE) using novel photocrosslinker technology. The cinnamaldehyde showed potent antimicrobial activity (145mg/mL of MIC) against MRSA 090 and radical scavenging activity (RSA). The cinnamaldehyde was successfully cross-linked to LDPE and exhibited excellent antibiofilm properties against MRSA090 compared to bare LDPE. This positive interaction of developed Cin-C-LDPE against MRSA090 biofilm was confirmed by SEM and FT-IR studies, and results showed the damaged cell membrane architecture, inturn abridged adherence of MRSA090. The Cin-C-LDPE wrapped chicken, mutton, cheese, and grapes showed 2.5±0.15 log MRSA 090 reduction at the end of 10th day compared to the bare LDPE wrapped food samples. This clearly concludes that for the first time we have developed a novel Cin-C-LDPE food wrap technology effectively involved in biocidal activity against MRSA090. Applying this new strategy to develop food wrap containing nontoxic natural antimicrobial to target cell membrane components is the upcoming challenging and promising research gap remains in the food packaging industry for the future world. Copyright © 2017 Elsevier Ltd. All rights reserved.

Terrestrial Planet Finder: Coda to 10 Years of Technology Development

Science.gov (United States)

Lawson, Peter R.

2009-01-01

The Terrestrial Planet Finder (TPF) was proposed as a mission concept to the 2000 Decadal Survey, and received a very high ranking amongst the major initiatives that were then reviewed. As proposed, it was a formation flying array of four 3-m class mid-infrared telescopes, linked together as an interferometer. Its science goal was to survey 150 nearby stars for the presence of Earth-like planets, to detect signs of life or habitability, and to enable revolutionary advances in high angular resolution astrophysics. The Decadal Survey Committee recommended that $200M be invested to advance TPF technology development in the Decade of 2000-2010. This paper presents the results of NASA's investment.

Drugs + HIV, Learn the Link

Medline Plus

Full Text Available ... once can have serious health consequences. We also work to reach parents and teachers—influential figures in the lives of young people—with the Learn the Link message. Campaign messages and materials were tested among various groups of young people, guiding the use of technology, ...

Frontier In-Situ Resource Utilization for Enabling Sustained Human Presence on Mars

Science.gov (United States)

Moses, Robert W.; Bushnell, Dennis M.

2016-01-01

The currently known resources on Mars are massive, including extensive quantities of water and carbon dioxide and therefore carbon, hydrogen and oxygen for life support, fuels and plastics and much else. The regolith is replete with all manner of minerals. In Situ Resource Utilization (ISRU) applicable frontier technologies include robotics, machine intelligence, nanotechnology, synthetic biology, 3-D printing/additive manufacturing and autonomy. These technologies combined with the vast natural resources should enable serious, pre- and post-human arrival ISRU to greatly increase reliability and safety and reduce cost for human colonization of Mars. Various system-level transportation concepts employing Mars produced fuel would enable Mars resources to evolve into a primary center of trade for the inner solar system for eventually nearly everything required for space faring and colonization. Mars resources and their exploitation via extensive ISRU are the key to a viable, safe and affordable, human presence beyond Earth. The purpose of this paper is four-fold: 1) to highlight the latest discoveries of water, minerals, and other materials on Mars that reshape our thinking about the value and capabilities of Mars ISRU; 2) to summarize the previous literature on Mars ISRU processes, equipment, and approaches; 3) to point to frontier ISRU technologies and approaches that can lead to safe and affordable human missions to Mars; and 4) to suggest an implementation strategy whereby the ISRU elements are phased into the mission campaign over time to enable a sustainable and increasing human presence on Mars.

Technology assisted education: An overview of success factors

Directory of Open Access Journals (Sweden)

Mehdi Asgarkhani

Full Text Available This paper elaborates on the role of digital and web technologies in learning. It discusses that technology alone cannot deliver successful learning outcomes. In rolling out technology-enabled learning solutions a range of other factors must be taken into consideration. A model for technology-based learning values and pilot study of a group of technology-enabled digital learning initiatives in institutions are presented to highlight the importance of people and process related factors alongside technology. The outcome of this preliminary study is presented; it indicates no significant strategic gains were derived from the use of web-technologies.

Benchmarking Linked Open Data Management Systems

NARCIS (Netherlands)

R. Angles Rojas (Renzo); M.-D. Pham (Minh-Duc); P.A. Boncz (Peter)

2014-01-01

htmlabstractWith inherent support for storing and analysing highly interconnected data, graph and RDF databases appear as natural solutions for developing Linked Open Data applications. However, current benchmarks for these database technologies do not fully attain the desirable characteristics

Retracted: Innovative GIS technology for forest monitoring: ForestLink

African Journals Online (AJOL)

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs. Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link ...

Use of a charge reducing agent to enable intact mass analysis of cysteine-linked antibody-drug-conjugates by native mass spectrometry

Directory of Open Access Journals (Sweden)

Kamila J. Pacholarz

2016-06-01

Full Text Available Antibody-drug-conjugates (ADC are a growing class of anticancer biopharmaceuticals. Conjugation of cysteine linked ADCs, requires initial reduction of mAb inter-chain disulfide bonds, as the drugs are attached via thiol chemistry. This results in the active mAb moiety being transformed from a covalently linked tetramer to non-covalently linked complexes, which hinders precise determination of drug load with LC–MS. Here, we show how the addition of the charge reducing agent triethylammonium acetate (TEAA preserves the intact mAb structure, is well suited to the study of cysteine linked conjugates and facilitates easy drug load determination by direct infusion native MS.

Evaluation of Mixed-Mode Data-Link Communications for NextGen 4DT and Equivalent Visual Surface Operations

Science.gov (United States)

Prinzel, Lawrence J., III; Shelton, Kevin J.; Jones, Denise R.; Allamandola, Angela S.; Arthur, Jarvis, J., III; Bailey, Randall E.

2010-01-01

By 2025, U.S. air traffic is predicted to increase 3-fold and may strain the current air traffic management system, which may not be able to accommodate this growth. In response to this challenge, a revolutionary new concept has been proposed for U.S. aviation operations, termed the Next Generation Air Transportation System or NextGen. Many key capabilities are being identified to enable NextGen, including the use of data-link communications. Because NextGen represents a radically different approach to air traffic management and requires a dramatic shift in the tasks, roles, and responsibilities for the flight deck, there are numerous research issues and challenges that must be overcome to ensure a safe, sustainable air transportation system. Flight deck display and crew-vehicle interaction concepts are being developed that proactively investigate and overcome potential technology and safety barriers that might otherwise constrain the full realization of NextGen. The paper describes simulation research examining data-link communications during 4DT and equivalent visual surface operations.

Critical Technology Determination for Future Human Space Flight

Science.gov (United States)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

SMD Technology Development Story for NASA Annual Technology report

Science.gov (United States)

Seablom, Michael S.

2017-01-01

The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

Information and communication technology-enabled person-centered care for the "big five" chronic conditions: scoping review.

Science.gov (United States)

Wildevuur, Sabine E; Simonse, Lianne W L

2015-03-27

Person-centered information and communication technology (ICT) could encourage patients to take an active part in their health care and decision-making process, and make it possible for patients to interact directly with health care providers and services about their personal health concerns. Yet, little is known about which ICT interventions dedicated to person-centered care (PCC) and connected-care interactions have been studied, especially for shared care management of chronic diseases. The aim of this research is to investigate the extent, range, and nature of these research activities and identify research gaps in the evidence base of health studies regarding the "big 5" chronic diseases: diabetes mellitus, cardiovascular disease, chronic respiratory disease, cancer, and stroke. The objective of this paper was to review the literature and to scope the field with respect to 2 questions: (1) which ICT interventions have been used to support patients and health care professionals in PCC management of the big 5 chronic diseases? and (2) what is the impact of these interventions, such as on health-related quality of life and cost efficiency? This research adopted a scoping review method. Three electronic medical databases were accessed: PubMed, EMBASE, and Cochrane Library. The research reviewed studies published between January 1989 and December 2013. In 5 stages of systematic scanning and reviewing, relevant studies were identified, selected, and charted. Then we collated, summarized, and reported the results. From the initial 9380 search results, we identified 350 studies that qualified for inclusion: diabetes mellitus (n=103), cardiovascular disease (n=89), chronic respiratory disease (n=73), cancer (n=67), and stroke (n=18). Persons with one of these chronic conditions used ICT primarily for self-measurement of the body, when interacting with health care providers, with the highest rates of use seen in chronic respiratory (63%, 46/73) and cardiovascular (53

Semantically Enabling Knowledge Representation of Metamorphic Petrology Data

Science.gov (United States)

West, P.; Fox, P. A.; Spear, F. S.; Adali, S.; Nguyen, C.; Hallett, B. W.; Horkley, L. K.

2012-12-01

More and more metamorphic petrology data is being collected around the world, and is now being organized together into different virtual data portals by means of virtual organizations. For example, there is the virtual data portal Petrological Database (PetDB, http://www.petdb.org) of the Ocean Floor that is organizing scientific information about geochemical data of ocean floor igneous and metamorphic rocks; and also The Metamorphic Petrology Database (MetPetDB, http://metpetdb.rpi.edu) that is being created by a global community of metamorphic petrologists in collaboration with software engineers and data managers at Rensselaer Polytechnic Institute. The current focus is to provide the ability for scientists and researchers to register their data and search the databases for information regarding sample collections. What we present here is the next step in evolution of the MetPetDB portal, utilizing semantically enabled features such as discovery, data casting, faceted search, knowledge representation, and linked data as well as organizing information about the community and collaboration within the virtual community itself. We take the information that is currently represented in a relational database and make it available through web services, SPARQL endpoints, semantic and triple-stores where inferencing is enabled. We will be leveraging research that has taken place in virtual observatories, such as the Virtual Solar Terrestrial Observatory (VSTO) and the Biological and Chemical Oceanography Data Management Office (BCO-DMO); vocabulary work done in various communities such as Observations and Measurements (ISO 19156), FOAF (Friend of a Friend), Bibo (Bibliography Ontology), and domain specific ontologies; enabling provenance traces of samples and subsamples using the different provenance ontologies; and providing the much needed linking of data from the various research organizations into a common, collaborative virtual observatory. In addition to better

Using internet enabled mobile devices and social networking technologies to promote exercise as an intervention for young first episode psychosis patients

Directory of Open Access Journals (Sweden)

Sun Pamela

2011-05-01

Full Text Available Abstract Background Young people with first episode psychosis are at an increased risk for a range of poor health outcomes. In contrast to the growing body of evidence that suggests that exercise therapy may benefit the physical and mental health of people diagnosed with schizophrenia, there are no studies to date that have sought to extend the use of exercise therapy among patients with first episode psychosis. The aim of the study is to test the feasibility and acceptability of an exercise program that will be delivered via internet enabled mobile devices and social networking technologies among young people with first episode psychosis. Methods/Design This study is a qualitative pilot study being conducted at Orygen Youth Health Research Centre in Melbourne, Australia. Participants are young people aged 15-24 who are receiving clinical care at a specialist first episode psychosis treatment centre. Participants will also comprise young people from the general population. The exercise intervention is a 9-week running program, designed to gradually build a person's level of fitness to be able to run 5 kilometres (3 miles towards the end of the program. The program will be delivered via an internet enabled mobile device. Participants will be asked to post messages about their running experiences on the social networking website, and will also be asked to attend three face-to-face interviews. Discussion This paper describes the development of a qualitative study to pilot a running program coupled with the use of internet enabled mobile devices among young people with first episode psychosis. If the program is found to be feasible and acceptable to patients, it is hoped that further rigorous evaluations will ultimately lead to the introduction of exercise therapy as part of an evidence-based, multidisciplinary approach in routine clinical care.

Using internet enabled mobile devices and social networking technologies to promote exercise as an intervention for young first episode psychosis patients.

Science.gov (United States)

Killackey, Eoin; Anda, Anna Lee; Gibbs, Martin; Alvarez-Jimenez, Mario; Thompson, Andrew; Sun, Pamela; Baksheev, Gennady N

2011-05-12

Young people with first episode psychosis are at an increased risk for a range of poor health outcomes. In contrast to the growing body of evidence that suggests that exercise therapy may benefit the physical and mental health of people diagnosed with schizophrenia, there are no studies to date that have sought to extend the use of exercise therapy among patients with first episode psychosis. The aim of the study is to test the feasibility and acceptability of an exercise program that will be delivered via internet enabled mobile devices and social networking technologies among young people with first episode psychosis. This study is a qualitative pilot study being conducted at Orygen Youth Health Research Centre in Melbourne, Australia. Participants are young people aged 15-24 who are receiving clinical care at a specialist first episode psychosis treatment centre. Participants will also comprise young people from the general population. The exercise intervention is a 9-week running program, designed to gradually build a person's level of fitness to be able to run 5 kilometres (3 miles) towards the end of the program. The program will be delivered via an internet enabled mobile device. Participants will be asked to post messages about their running experiences on the social networking website, and will also be asked to attend three face-to-face interviews. This paper describes the development of a qualitative study to pilot a running program coupled with the use of internet enabled mobile devices among young people with first episode psychosis. If the program is found to be feasible and acceptable to patients, it is hoped that further rigorous evaluations will ultimately lead to the introduction of exercise therapy as part of an evidence-based, multidisciplinary approach in routine clinical care.

Linking unlearning with innovation through organizational memory and technology

OpenAIRE

Jiménez Jiménez, Daniel; Cepeda Carrión, Gabriel; Cegarra Navarro, Juan Gabriel

2010-01-01

While the information technologies provide organizational members with explicit concepts, such as writing instruction manuals, the ‘organizational memory’ provides individuals with tacit knowledge, such as systematic sets, routines and shared visions. This means that individuals within an organization learn by using both the organizational memory and the information technologies. They interact to reduce organizational information needs contributing to improve organizational innovativeness....

Photonic-Enabled RF Canceller with Tunable Time-Delay Taps

Science.gov (United States)

2016-12-05

Photonic -Enabled RF Canceller with Tunable Time-Delay Taps Kenneth E. Kolodziej, Sivasubramaniam Yegnanarayanan, Bradley T. Perry MIT Lincoln...canceller design that uses photonics and a vector modulator architecture to provide a high number of canceller taps with tunable time-delays, which allow...microwave photonics , RF cancellation. I. INTRODUCTION In-Band Full-Duplex (IBFD) technologies are being consid- ered for 5th generation (5G) wireless

Evaluation strategies for midwifery education linked to digital media and distance delivery technology.

Science.gov (United States)

Fullerton, Judith T; Ingle, Henry T

2003-01-01

The goal of the teaching and learning process for health professionals is the acquisition of a fundamental core of knowledge, the demonstration of critical thinking ability, and the demonstration of competency in the performance of clinical skills. Teaching and learning in distance education programs require that the administration, teachers, and students be creative in developing evaluation strategies that can be adapted to the challenges of the cyberspace on-line educational environment. Evaluation standards for distance education programs recently have been delineated by federal agencies, private organizations, and academic accreditation associations. These standards are linked to principles of sound education practice that promote program quality, high levels of student-faculty interaction, and support effective teaching and learning in the distance education context. A growing body of evidence supports the conclusion that technology-enhanced teaching is equivalent in effectiveness compared with traditional methods when student-learning outcomes are the focus of measurement. An allied body of literature offers model approaches that can be useful to educators who must also conduct the evaluation of clinical skills, provide feedback, and promote socialization to the nurse-midwifery/midwifery role for students being educated in whole or in part through instruction delivered at a distance.

New Mobile Technologies

DEFF Research Database (Denmark)

Tan, Su-En; Henten, Anders

2006-01-01

This paper takes a look at Clayton Christensen 's theory of disruptive technologies and how Christensen's theory relates to other innovation theories. It also proposes a new layer of analysis to this theory to better link the technology analysis to the market analysis of any given technology...... product. This layer suggests that complementarity and substitutability are important criteria for technologies to be market disruptions or sustaining changes....

The use of smart technologies in enabling construction components reuse: A viable method or a problem creating solution?

Science.gov (United States)

Iacovidou, Eleni; Purnell, Phil; Lim, Ming K

2018-06-15

The exploitation of Radio Frequency Identification (RFID) for tracking and archiving the properties of structural construction components could be a potentially innovative disruption for the construction sector. This is because RFID can stimulate the reuse of construction components and reduce their wastage, hence addressing sustainability issues in the construction sector. To test the plausibility of that idea, this study explores the potential pre-conditions for RFID to facilitate construction components reuse, and develops a guidance for promoting their redistribution back to the supply chain. It also looks at how integrating RFID with Building Information Modelling (BIM) can possibly be a valuable extension of its capabilities, providing the opportunity for tracked components to be incorporated into new structures in an informed, sound way. A preliminary assessment of the strengths, weaknesses, opportunities and threats of the RFID technology is presented in order to depict its current and future potential in promoting construction components' sustainable lifecycle management, while emphasis has been laid on capturing their technical, environmental, economic and social value. Findings suggest that the collection of the right amount of information at the design-construction-deconstruction-reuse-disposal stage is crucial for RFID to become a successful innovation in the construction sector. Although a number of limitations related to the technical operability and recycling of RFID tags seem to currently hinder its uptake for structural components' lifecycle management, future technological innovations could provide solutions that would enable it to become a mainstream practice. Taken together these proposals advocate that the use of RFID and its integration with BIM can create the right environment for the development of new business models focused on sustainable resource management. These models may then unlock multiple values that are otherwise dissipated in

Linking Technology Capabilities to Marketing Requirements: Case of Indonesian Aircraft Industry

Directory of Open Access Journals (Sweden)

Yulianto Suharto

2014-08-01

Full Text Available Abstract. The relationship between strategic technology planning and the overall business strategy has been one of the growing fields that attract much interest both from academics and industrials point of view. The increasingly important role that technology plays in today’s business success is well established.Strategic technology planning activities--within a corporate level--are often implemented by applying integrated planning instrument, which allow firms to consider both technology-oriented and product-oriented aspects. This paper is an attempt to explore the role of strategic planning in the high tech industry using a specific case of aerospace industry in Indonesia.  In order to compete effectively inthe open global marketplace, the company must learn to integrate technology managementwith strategic planning. In other words, all top managers have to linktheir technology capabilities to marketing requirements.Keywords:  technology planning; business strategy; technology capability; marketing requirement; strategic mix 

Space station as a vital focus for advancing the technologies of automation and robotics

Science.gov (United States)

Varsi, Giulio; Herman, Daniel H.

1988-01-01

A major guideline for the design of the U.S. Space Station is that the Space Station address a wide variety of functions. These functions include the servicing of unmanned assets in space, the support of commercial labs in space and the efficient management of the Space Station itself; the largest space asset. The technologies of Automation and Robotics have the promise to help in reducing Space Station operating costs and to achieve a highly efficient use of the human in space. The use of advanced automation and artificial intelligence techniques, such as expert systems, in Space Station subsystems for activity planning and failure mode management will enable us to reduce dependency on a mission control center and could ultimately result in breaking the umbilical link from Earth to the Space Station. The application of robotic technologies with advanced perception capability and hierarchical intelligent control to servicing system will enable the servicing of assets either in space or in situ with a high degree of human efficiency. The results of studies leading toward the formulation of an automation and robotics plan for Space Station development are presented.

Enabling instrumentation and technology for 21st century light sources

Energy Technology Data Exchange (ETDEWEB)

Byrd, J.M.; Shea, T.J.; Denes, P.; Siddons, P.; Attwood, D.; Kaertner, F.; Moog, L.; Li, Y.; Sakdinawat, A.; Schlueter, R.

2010-06-01

We present the summary from the Accelerator Instrumentation and Technology working group, one of the five working groups that participated in the BES-sponsored Workshop on Accelerator Physics of Future Light Sources held in Gaithersburg, MD September 15-17, 2009. We describe progress and potential in three areas: attosecond instrumentation, photon detectors for user experiments, and insertion devices.

Hardwiring patient blood management: harnessing information technology to optimize transfusion practice.

Science.gov (United States)

Dunbar, Nancy M; Szczepiorkowski, Zbigniew M

2014-11-01

This review will describe recent applications of computerized provider order entry (CPOE) with clinical decision support systems (CDSS) in transfusion medicine and other novel ways information technology is being applied to support patient blood management (PBM) efforts. CPOE with CDSS can be used to encourage appropriate transfusion practices as part of an institutional PBM program. The impact of CPOE with CDSS is enhanced when the laboratory information system (LIS) can be linked to the electronic medical record (EMR) to enable adaptive alerts that query transfusion orders against current laboratory and/or clinical data to ensure provider ordering practice is consistent with institutional guidelines. Additional current applications of healthcare information technology to transfusion medicine include creation of electronic reports to support order auditing, assessment of blood product utilization and compliance monitoring. Application of healthcare information technology to transfusion medicine will expand, as more institutions embrace PBM and utilize their EMR and LIS to 'hardwire' appropriate transfusion practice. The impact of implementation of CPOE with CDSS is variable and influenced by multiple factors including existing practice patterns, provider receptiveness and system configuration.

Technology advanced mini-eyesafe rangefinder (TAMER)

Science.gov (United States)

Abousleman, Glen P.; Smeed, Bill

1998-08-01

The Technology Advanced Mini-Eyesafe Rangefinder (TAMER) module is a portable, lightweight (7 lbs), hand-held, target determination system. This rapid prototype program involved the integration of a Motorola 68360 microprocessor, electronic compass, laser range finder, GPS, 4 PCMCIA expansion slots, 0.7-inch micro display, digital camera, floating point unit, and various communications interfaces. The CPU computes an absolute target position based on laser range to target, C/VAM azimuth and inclination inputs, and absolute GPS position. This target position is automatically formatted into a standard military surveillance report and stored in local non- volatile memory. The operator can attach to a SINCGARS radio or to any RS232 compatible system (e.g., cellular telephone). To facilitate the above functionality, the TAMER system utilizes various power saving strategies including software- geared power reduction, power supply configuration, external device integration, and incorporation of low-power ICs. Additionally, TAMER utilizes state-of-the-art digital image compression technology. This custom image coder is based on wavelet decomposition and trellis-coded quantization (TCQ). The algorithm enables TAMER to transmit useful imagery over its severely disadvantaged wireless link.

Enabling kinetic micro-penetrator technology for Solar System research

Science.gov (United States)

Gowen, R. A.

2008-09-01

Whilst the concept of high speed impacting penetrator probes is not new, recent highly successful ground test results have considerably improved the perception that these can be a viable and useful addition to the current toolbox of planetary probes. Previous developments only led to a single deployment (Deep Space-2 to Mars on the ill fated NASA Mars Polar Lander mission in 1999) where neither the soft lander nor penetrator was ever heard from, which is not a logical basis for dismissing penetrator technology. Other space penetrator programmes have included the Russian Mars'96 ~80m/s penetrators for which the whole mission was lost before the spacecraft left Earth orbit, and the Japanese Lunar-A program which was cancelled after a lengthy development program which however saw multiple successful ground trials. The Japanese penetrators were designed for ~300m/s impact. The current UK penetrator developments are actively working towards full space qualification for a Lunar penetrators (MoonLITE mission), which would also provide a significant technical demonstration towards the development of smaller, shorter lived penetrators for exploring other solar system objects. We are advocating delivered micro-penetrators in the mass range ~4-10Kg, (preceded by ~13Kg Lunar penetrator MoonLITE development program), impacting at around 100-500m/s and carrying a scientific payload of around 2Kg. Additional mass is required to deliver the probes from `orbit' to surface which is dependent upon the particular planetary body in question. The mass per descent module therefore involves and additional element which, for a descent through an atmosphere could be quite modest, while for a flyby deployment, can be substantial. For Europa we estimate a descent module mass of ~13 Kg, while for Enceladus the value is ~40Kg for Enceladus since a deceleration of ~3.8 kms-1 is needed from a Titan orbit. The delivery system could consist of a rocket deceleration motor and attitude control system

Visualization of Host-Polerovirus Interaction Topologies Using Protein Interaction Reporter Technology.

Science.gov (United States)

DeBlasio, Stacy L; Chavez, Juan D; Alexander, Mariko M; Ramsey, John; Eng, Jimmy K; Mahoney, Jaclyn; Gray, Stewart M; Bruce, James E; Cilia, Michelle

2016-02-15

Demonstrating direct interactions between host and virus proteins during infection is a major goal and challenge for the field of virology. Most protein interactions are not binary or easily amenable to structural determination. Using infectious preparations of a polerovirus (Potato leafroll virus [PLRV]) and protein interaction reporter (PIR), a revolutionary technology that couples a mass spectrometric-cleavable chemical cross-linker with high-resolution mass spectrometry, we provide the first report of a host-pathogen protein interaction network that includes data-derived, topological features for every cross-linked site that was identified. We show that PLRV virions have hot spots of protein interaction and multifunctional surface topologies, revealing how these plant viruses maximize their use of binding interfaces. Modeling data, guided by cross-linking constraints, suggest asymmetric packing of the major capsid protein in the virion, which supports previous epitope mapping studies. Protein interaction topologies are conserved with other species in the Luteoviridae and with unrelated viruses in the Herpesviridae and Adenoviridae. Functional analysis of three PLRV-interacting host proteins in planta using a reverse-genetics approach revealed a complex, molecular tug-of-war between host and virus. Structural mimicry and diversifying selection-hallmarks of host-pathogen interactions-were identified within host and viral binding interfaces predicted by our models. These results illuminate the functional diversity of the PLRV-host protein interaction network and demonstrate the usefulness of PIR technology for precision mapping of functional host-pathogen protein interaction topologies. The exterior shape of a plant virus and its interacting host and insect vector proteins determine whether a virus will be transmitted by an insect or infect a specific host. Gaining this information is difficult and requires years of experimentation. We used protein interaction

Enabling content distribution in vehicular ad hoc networks

CERN Document Server

Luan, Tom H; Bai, Fan

2014-01-01

This SpringerBrief presents key enabling technologies and state-of-the-art research on delivering efficient content distribution services to fast moving vehicles. It describes recent research developments and proposals towards the efficient, resilient and scalable content distribution to vehicles through both infrastructure-based and infrastructure-less vehicular networks. The authors focus on the rich multimedia services provided by vehicular environment content distribution including vehicular communications and media playback, giving passengers many infotainment applications. Common problem

High-aggregate-capacity visible light communication links using stacked multimode polymer waveguides and micro-pixelated LED arrays

Science.gov (United States)

Bamiedakis, N.; McKendry, J. J. D.; Xie, E.; Gu, E.; Dawson, M. D.; Penty, R. V.; White, I. H.

2018-02-01

In recent years, light emitting diodes (LEDs) have gained renewed interest for use in visible light communication links (VLC) owing to their potential use as both high-quality power-efficient illumination sources as well as low-cost optical transmitters in free-space and guided-wave links. Applications that can benefit from their use include optical wireless systems (LiFi and Internet of Things), in-home and automotive networks, optical USBs and short-reach low-cost optical interconnects. However, VLC links suffer from the limited LED bandwidth (typically 100 MHz). As a result, a combination of novel LED devices, advanced modulation formats and multiplexing methods are employed to overcome this limitation and achieve high-speed (>1 Gb/s) data transmission over such links. In this work, we present recent advances in the formation of high-aggregate-capacity low cost guided wave VLC links using stacked polymer multimode waveguides and matching micro-pixelated LED (μLED) arrays. μLEDs have been shown to exhibit larger bandwidths (>200 MHz) than conventional broad-area LEDs and can be formed in large array configurations, while multimode polymer waveguides enable the formation of low-cost optical links onto standard PCBs. Here, three- and four-layered stacks of multimode waveguides, as well as matching GaN μLED arrays, are fabricated in order to generate high-density yet low-cost optical interconnects. Different waveguide topologies are implemented and are investigated in terms of loss and crosstalk performance. The initial results presented herein demonstrate good intrinsic crosstalk performance and indicate the potential to achieve >= 0.5 Tb/s/mm2 aggregate interconnection capacity using this low-cost technology.

LinkImputeR: user-guided genotype calling and imputation for non-model organisms.

Science.gov (United States)

Money, Daniel; Migicovsky, Zoë; Gardner, Kyle; Myles, Sean

2017-07-10

NGS technologies. It enables the user to quickly and easily examine the effects of varying thresholds and filters on the number and quality of the resulting genotype calls. In this manner, users can decide on thresholds that are most suitable for their purposes. We show that LinkImputeR can significantly augment the value and utility of NGS data sets, especially in non-model organisms with poor genomic resources.

The GEOSS Science and Technology Stakeholder Network and Service Suite: Linking S&T Communities and GEOSS

Science.gov (United States)

Plag, Hans-Peter; Jules-Plag, Shelley

2015-04-01

The Global Earth Observation System of Systems (GEOSS) developed by the Group on Earth Observations (GEO) aims to provide practice-relevant knowledge in support of decision making in a wide range of societal benefit areas. Generating this practice-relevant knowledge based on Earth observations, socio-economic data and models often depends on research, and utilization of the societal benefits of EOs requires the involvement of science and research communities. Building a GEOSS responding to the needs of a wide range of users necessitates contributions from many science and technology (S&T) communities. In particular, a strong engagement of science and technology (S&T) communities in both the development and use of GEOSS is necessary to address the complex issues associated with the on-going transition out of the Holocene. S&T support is needed to improve interoperability between global observing, modeling, and information systems; to enable data integration across disciplinary boundaries; to facilitate data sharing, archiving, dissemination, and reanalysis; to optimize the recording of observations, assimilation of data into models, and generation of data products; to enhance the value of observations from individual observing systems through their integration in the SBAs; and to harmonize well-calibrated, highly accurate, stable, sustained in-situ and satellite observations of the same variable recorded by different sensors and different agencies. Consequently, the GEO Work Plan includes several Tasks focusing on outreach to S&T communities, and most of the GEO Community of Practice have a strong S&T component. The GEOSS S&T Stakeholder Network facilitates input from S&T communities to GEO. Infrastructure serving and linking S&T users communities and GEOSS has been developed and is integrated into a GEOSS S&T Service Suite (GSTSS). The GSTSS has several outreach components for the demonstration of GEOSS and its value for S&T communities, and for services supporting

Education Technology Success Stories

Science.gov (United States)

West, Darrell M.; Bleiberg, Joshua

2013-01-01

Advances in technology are enabling dramatic changes in education content, delivery, and accessibility. Throughout history, new technologies have facilitated the exponential growth of human knowledge. In the early twentieth century, the focus was on the use of radios in education. But since then, innovators have seen technology as a way to improve…

LRSim: A Linked-Reads Simulator Generating Insights for Better Genome Partitioning

Directory of Open Access Journals (Sweden)

Ruibang Luo

Full Text Available Linked-read sequencing, using highly-multiplexed genome partitioning and barcoding, can span hundreds of kilobases to improve de novo assembly, haplotype phasing, and other applications. Based on our analysis of 14 datasets, we introduce LRSim that simulates linked-reads by emulating the library preparation and sequencing process with fine control over variants, linked-read characteristics, and the short-read profile. We conclude from the phasing and assembly of multiple datasets, recommendations on coverage, fragment length, and partitioning when sequencing genomes of different sizes and complexities. These optimizations improve results by orders of magnitude, and enable the development of novel methods. LRSim is available at https://github.com/aquaskyline/LRSIM. Keywords: Linked-read, Molecular barcoding, Reads partitioning, Phasing, Reads simulation, Genome assembly, 10X Genomics

Informatics enables public health surveillance

Directory of Open Access Journals (Sweden)

Scott J. N McNabb

2017-01-01

Full Text Available Over the past decade, the world has radically changed. New advances in information and communication technologies (ICT connect the world in ways never imagined. Public health informatics (PHI leveraged for public health surveillance (PHS, can enable, enhance, and empower essential PHS functions (i.e., detection, reporting, confirmation, analyses, feedback, response. However, the tail doesn't wag the dog; as such, ICT cannot (should not drive public health surveillance strengthening. Rather, ICT can serve PHS to more effectively empower core functions. In this review, we explore promising ICT trends for prevention, detection, and response, laboratory reporting, push notification, analytics, predictive surveillance, and using new data sources, while recognizing that it is the people, politics, and policies that most challenge progress for implementation of solutions.

An asymmetric resonant coupling wireless power transmission link for Micro-Ball Endoscopy.

Science.gov (United States)

Sun, Tianjia; Xie, Xiang; Li, Guolin; Gu, Yingke; Deng, Yangdong; Wang, Ziqiang; Wang, Zhihua

2010-01-01

This paper investigates the design and optimization of a wireless power transmission link targeting Micro-Ball Endoscopy applications. A novel asymmetric resonant coupling structure is proposed to deliver power to an endoscopic Micro-Ball system for image read-out after it is excreted. Such a technology enables many key medical applications with stringent requirements for small system volume and high power delivery efficiency. A prototyping power transmission sub-system of the Micro-Ball system was implemented. It consists of primary coil, middle resonant coil, and cube-like full-direction secondary receiving coils. Our experimental results proved that 200mW of power can be successfully delivered. Such a wireless power transmission capability could satisfy the requirements of the Micro-Ball based endoscopy application. The transmission efficiency is in the range of 41% (worst working condition) to 53% (best working condition). Comparing to conventional structures, Asymmetric Resonant Coupling Structure improves power efficiency by 13%.

Route Network Construction with Location-Direction-Enabled Photographs

Science.gov (United States)

Fujita, Hideyuki; Sagara, Shota; Ohmori, Tadashi; Shintani, Takahiko

2018-05-01

We propose a method for constructing a geometric graph for generating routes that summarize a geographical area and also have visual continuity by using a set of location-direction-enabled photographs. A location- direction-enabled photograph is a photograph that has information about the location (position of the camera at the time of shooting) and the direction (direction of the camera at the time of shooting). Each nodes of the graph corresponds to a location-direction-enabled photograph. The location of each node is the location of the corresponding photograph, and a route on the graph corresponds to a route in the geographic area and a sequence of photographs. The proposed graph is constructed to represent characteristic spots and paths linking the spots, and it is assumed to be a kind of a spatial summarization of the area with the photographs. Therefore, we call the routes on the graph as spatial summary route. Each route on the proposed graph also has a visual continuity, which means that we can understand the spatial relationship among the continuous photographs on the route such as moving forward, backward, turning right, etc. In this study, when the changes in the shooting position and shooting direction satisfied a given threshold, the route was defined to have visual continuity. By presenting the photographs in order along the generated route, information can be presented sequentially, while maintaining visual continuity to a great extent.

Integrated and Intelligent Manufacturing: Perspectives and Enablers

Directory of Open Access Journals (Sweden)

Yubao Chen

2017-10-01

Full Text Available With ever-increasing market competition and advances in technology, more and more countries are prioritizing advanced manufacturing technology as their top priority for economic growth. Germany announced the Industry 4.0 strategy in 2013. The US government launched the Advanced Manufacturing Partnership (AMP in 2011 and the National Network for Manufacturing Innovation (NNMI in 2014. Most recently, the Manufacturing USA initiative was officially rolled out to further “leverage existing resources... to nurture manufacturing innovation and accelerate commercialization” by fostering close collaboration between industry, academia, and government partners. In 2015, the Chinese government officially published a 10-year plan and roadmap toward manufacturing: Made in China 2025. In all these national initiatives, the core technology development and implementation is in the area of advanced manufacturing systems. A new manufacturing paradigm is emerging, which can be characterized by two unique features: integrated manufacturing and intelligent manufacturing. This trend is in line with the progress of industrial revolutions, in which higher efficiency in production systems is being continuously pursued. To this end, 10 major technologies can be identified for the new manufacturing paradigm. This paper describes the rationales and needs for integrated and intelligent manufacturing (i2M systems. Related technologies from different fields are also described. In particular, key technological enablers, such as the Internet of Things and Services (IoTS, cyber-physical systems (CPSs, and cloud computing are discussed. Challenges are addressed with applications that are based on commercially available platforms such as General Electric (GE’s Predix and PTC’s ThingWorx.

Wireless link using on-chip photonic integrated millimeter-wave sources

NARCIS (Netherlands)

Guzmán, R. C.; Gordón, C.; Carpintero, G.; Leijtens, X.; Lawniczak, Katarzyna

2015-01-01

Over the last few years wireless link data traffic has drastically increased due to a change in the way today's society creates, shares, and consumes information. Millimeter-waves (30-300 GHz) have a great advantage due to the wide bandwidths available for carrying information, enabling broadband

260 Gbit/s photonic-wireless link in the THz band

DEFF Research Database (Denmark)

Pang, X.; Jia, S.; Ozolins, O.

2016-01-01

A single-transmitter/single-receiver THz link (0.3-0.5 THz) with a record net data rate of 260 Gbit/s is experimentally demonstrated. Spectrally efficient multi-channel signal transmission is enabled by a novel frequency-band-allocation scheme with pre-and post- digital equalization....

Consolidating drug data on a global scale using Linked Data.

Science.gov (United States)

Jovanovik, Milos; Trajanov, Dimitar

2017-01-21

Drug product data is available on the Web in a distributed fashion. The reasons lie within the regulatory domains, which exist on a national level. As a consequence, the drug data available on the Web are independently curated by national institutions from each country, leaving the data in varying languages, with a varying structure, granularity level and format, on different locations on the Web. Therefore, one of the main challenges in the realm of drug data is the consolidation and integration of large amounts of heterogeneous data into a comprehensive dataspace, for the purpose of developing data-driven applications. In recent years, the adoption of the Linked Data principles has enabled data publishers to provide structured data on the Web and contextually interlink them with other public datasets, effectively de-siloing them. Defining methodological guidelines and specialized tools for generating Linked Data in the drug domain, applicable on a global scale, is a crucial step to achieving the necessary levels of data consolidation and alignment needed for the development of a global dataset of drug product data. This dataset would then enable a myriad of new usage scenarios, which can, for instance, provide insight into the global availability of different drug categories in different parts of the world. We developed a methodology and a set of tools which support the process of generating Linked Data in the drug domain. Using them, we generated the LinkedDrugs dataset by seamlessly transforming, consolidating and publishing high-quality, 5-star Linked Drug Data from twenty-three countries, containing over 248,000 drug products, over 99,000,000 RDF triples and over 278,000 links to generic drugs from the LOD Cloud. Using the linked nature of the dataset, we demonstrate its ability to support advanced usage scenarios in the drug domain. The process of generating the LinkedDrugs dataset demonstrates the applicability of the methodological guidelines and the

Controlled Environments Enable Adaptive Management in Aquatic Ecosystems Under Altered Environments

Science.gov (United States)

Bubenheim, David L.

2016-01-01

Ecosystems worldwide are impacted by altered environment conditions resulting from climate, drought, and land use changes. Gaps in the science knowledge base regarding plant community response to these novel and rapid changes limit both science understanding and management of ecosystems. We describe how CE Technologies have enabled the rapid supply of gap-filling science, development of ecosystem simulation models, and remote sensing assessment tools to provide science-informed, adaptive management methods in the impacted aquatic ecosystem of the California Sacramento-San Joaquin River Delta. The Delta is the hub for California's water, supplying Southern California agriculture and urban communities as well as the San Francisco Bay area. The changes in environmental conditions including temperature, light, and water quality and associated expansion of invasive aquatic plants negatively impact water distribution and ecology of the San Francisco Bay/Delta complex. CE technologies define changes in resource use efficiencies, photosynthetic productivity, evapotranspiration, phenology, reproductive strategies, and spectral reflectance modifications in native and invasive species in response to altered conditions. We will discuss how the CE technologies play an enabling role in filling knowledge gaps regarding plant response to altered environments, parameterization and validation of ecosystem models, development of satellite-based, remote sensing tools, and operational management strategies.

Sharing and executing linked data queries in a collaborative environment.

Science.gov (United States)

García Godoy, María Jesús; López-Camacho, Esteban; Navas-Delgado, Ismael; Aldana-Montes, José F

2013-07-01

Life Sciences have emerged as a key domain in the Linked Data community because of the diversity of data semantics and formats available through a great variety of databases and web technologies. Thus, it has been used as the perfect domain for applications in the web of data. Unfortunately, bioinformaticians are not exploiting the full potential of this already available technology, and experts in Life Sciences have real problems to discover, understand and devise how to take advantage of these interlinked (integrated) data. In this article, we present Bioqueries, a wiki-based portal that is aimed at community building around biological Linked Data. This tool has been designed to aid bioinformaticians in developing SPARQL queries to access biological databases exposed as Linked Data, and also to help biologists gain a deeper insight into the potential use of this technology. This public space offers several services and a collaborative infrastructure to stimulate the consumption of biological Linked Data and, therefore, contribute to implementing the benefits of the web of data in this domain. Bioqueries currently contains 215 query entries grouped by database and theme, 230 registered users and 44 end points that contain biological Resource Description Framework information. The Bioqueries portal is freely accessible at http://bioqueries.uma.es. Supplementary data are available at Bioinformatics online.

Design of a deterministic link initialization mechanism for serial LVDS interconnects