Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Rosenbaum, Ralph K.; Hauschild, Michael Zwicky; Boulay, Anne-Marie

2018-01-01

This chapter is dedicated to the third phase of an LCA study, the Life Cycle Impact Assessment (LCIA) where the life cycle inventory’s information on elementary flows is translated into environmental impact scores. In contrast to the three other LCA phases, LCIA is in practice largely automated...

A case study by life cycle assessment

Science.gov (United States)

Li, Shuyun

2017-05-01

This article aims to assess the potential environmental impact of an electrical grinder during its life cycle. The Life Cycle Inventory Analysis was conducted based on the Simplified Life Cycle Assessment (SLCA) Drivers that calculated from the Valuation of Social Cost and Simplified Life Cycle Assessment Model (VSSM). The detailed results for LCI can be found under Appendix II. The Life Cycle Impact Assessment was performed based on Eco-indicator 99 method. The analysis results indicated that the major contributor to the environmental impact as it accounts for over 60% overall SLCA output. In which, 60% of the emission resulted from the logistic required for the maintenance activities. This was measured by conducting the hotspot analysis. After performing sensitivity analysis, it is evidenced that changing fuel type results in significant decrease environmental footprint. The environmental benefit can also be seen from the negative output values of the recycling activities. By conducting Life Cycle Assessment analysis, the potential environmental impact of the electrical grinder was investigated.

Life stressors and social resources: an integrated assessment approach.

Science.gov (United States)

Moos, R H; Fenn, C B; Billings, A G

1988-01-01

The Life Stressors and Social Resources Inventory (LISRES) is described. The inventory provides an integrated assessment of an individual's life context. It taps both relatively stable and new aspects of life stressors and social resources in eight domains: physical health, home/neighborhood, financial, work, spouse/partner, children, extended family, and friends. The indices were developed on data obtained at two points in time from groups of depressed patients, alcoholic patients, arthritic patients, and healthy adults. The indices are internally consistent, moderately intercorrelated, and relatively stable over time. In addition, they are predictably related to changes in respondents' functioning. Although more developmental work is needed, the LISRES has some potential clinical and research applications and may be helpful in examining the process of stress and coping.

Incorporating time-corrected life cycle greenhouse gas emissions in vehicle regulations.

Science.gov (United States)

Kendall, Alissa; Price, Lindsay

2012-03-06

Beginning with model year 2012, light-duty vehicles sold in the U.S. are subject to new rules that regulate tailpipe greenhouse gas (GHG) emissions based on grams of CO(2)-equivalent per mile (gCO(2)e/mi). However, improvements in vehicle technology, lower-carbon fuels, and improvements in GHG accounting practices which account for distortions related to emissions timing all contribute to shifting a greater portion of life cycle emissions away from the vehicle use phase and toward the vehicle production phase. This article proposes methods for calculating time-corrected life cycle emissions intensity on a gCO(2)e/mi basis and explores whether regulating only tailpipe CO(2) could lead to an undesirable regulatory outcome, where technologies and vehicle architectures with higher life cycle GHGs are favored over technologies with lower life cycle emissions but with higher tailpipe GHG emissions. Two life cycle GHG assessments for future vehicles are presented in addition to time correction factors for production and end-of-life GHG emissions. Results demonstrate that, based on the vehicle designs considered here, there is a potential for favoring vehicles with higher life cycle emissions if only tailpipe emissions are regulated; moreover, the application of time correction factors amplifies the importance of production emissions and the potential for a perverse outcome.

Evaluation of environmental impacts of cellulosic ethanol using life cycle assessment with technological advances over time

International Nuclear Information System (INIS)

Pawelzik, Paul F.; Zhang, Qiong

2012-01-01

Life Cycle Assessment (LCA) has been used in quantifying the environmental impacts of materials, processes, products, or systems across their entire lifespan from creation to disposal. To evaluate the environmental impact of advancing technology, Life Cycle Assessment with Technological Advances over Time (LCA-TAT) incorporates technology improvements within the traditional LCA framework. In this paper, the LCA-TAT is applied to quantify the environmental impacts of ethanol production using cellulosic biomass as a feedstock through the simultaneous saccharification and co-fermentation (SSCF) process as it improves over time. The data for the SSCF process are taken from the Aspen Plus ® simulation developed by the National Renewable Energy Lab (NREL). The Environmental Fate and Risk Assessment Tool (EFRAT) is used to calculate the fugitive emissions and SimaPro 7.1 software is used to quantify the environmental impacts of processes. The impact indicators of the processes are calculated using the Eco-indicator 95 method; impact categories analyzed include ozone layer depletion, heavy metals, carcinogens, summer smog, winter smog, pesticides, greenhouse effect, acidification, and eutrophication. Based on the LCA-TAT results, it is found that removal of the continuous ion exchange step within the pretreatment area increases the environmental impact of the process. The main contributor to the increase in the environmental impact of the process is the heavy metal indicator. In addition, a sensitivity analysis is performed to identify major inputs and outputs that affect environmental impacts of the overall process. Based on this analysis it is observed that an increase in waste production and acid use have the greatest effect on the environmental impacts of the SSCF process. Comparing economic analysis with projected technological advances performed by NREL, the improvement in environmental impact was not matched by a concomitant improvement in economic performance. In

Preventive maintenance and life time assessment with respect to cyclic operation; Foerebyggande underhaall och livslaengdsbedoemning med avseende paa cyklisk drift

Energy Technology Data Exchange (ETDEWEB)

Storesund, Jan

2011-03-15

Procedures that may be used for the life time assessments and growth laws for failure mechanisms with respect to cyclic operation has been compiled. Experience and analyzes of the effects of cyclical operation of steam drums, steam boxes, steam accumulators and valves has been compiled. For the strain-induced corrosion cracking in steam drums a correlation between the voltage level and the crack growth rate has been developed.

Life cycle assessment : Past, present, and future

NARCIS (Netherlands)

Guinée, Jeroen B.; Heijungs, Reinout; Huppes, Gjalt; Zamagni, Alessandra; Masoni, Paolo; Buonamici, Roberto; Ekvall, Tomas; Rydberg, Tomas

2011-01-01

Environmental life cycle assessment (LCA) has developed fast over the last three decades. Whereas LCA developed from merely energy analysis to a comprehensive environmental burden analysis in the 1970s, full-fledged life cycle impact assessment and life cycle costing models were introduced in the

A time-lagged momentary assessment study on daily life physical activity and affect.

Science.gov (United States)

Wichers, Marieke; Peeters, Frenk; Rutten, Bart P F; Jacobs, Nele; Derom, Catherine; Thiery, Evert; Delespaul, Philippe; van Os, Jim

2012-03-01

Novel study designs using within-subject methodology and frequent and prospective measurements are required to unravel direction of causality and dynamic processes of behavior over time. The current study examined the effects of physical activity on affective state. A primary and within-study replication sample was derived from twin pairs. Female twins (n = 504) participated in an experience sampling method study at baseline. Positive and negative affective changes were examined before and following daily life increases in physical activity. Neuroticism was measured at baseline and depressive symptoms were assessed at baseline and at each of four follow-up assessments. Diagnoses, derived by Structured Clinical Interview for Diagnostic and Statistical Manual for Mental Health-IV axis I disorders, (A. P. A., 1994) were obtained at baseline. A significant increase in positive affect (PA) following the moment of increase in physical activity was replicated across both samples up to 180 min after physical activity. There was no effect of physical activity on negative affect (NA). Across the two samples, a history of fulfilling diagnostic criteria for depression at least once moderated the effect of physical activity on PA, in that the effect was lost more rapidly. The study supports a causal effect of physical activity on PA. However, people with past experience of clinical depression may benefit less from the PA-inducing effect of physical activity. These findings have implications for the use of physical exercise in clinical practice.

Recent developments in Life Cycle Assessment

NARCIS (Netherlands)

Finnveden, Göran; Hauschild, Michael Z.; Ekvall, Tomas; Guinée, Jeroen B.; Heijungs, Reinout; Hellweg, Stefanie; Koehler, Annette; Pennington, David; Suh, Sangwon

2009-01-01

Life Cycle Assessment is a tool to assess the environmental impacts and resources used throughout a product's life cycle, i.e., from raw material acquisition, via production and use phases, to waste management. The methodological development in LCA has been strong, and LCA is broadly applied in

Towards Life Cycle Sustainability Assessment

Directory of Open Access Journals (Sweden)

Marzia Traverso

2010-10-01

Full Text Available Sustainability is nowadays accepted by all stakeholders as a guiding principle for both public policy making and corporate strategies. However, the biggest challenge for most organizations remains in the real and substantial implementation of the sustainability concept. The core of the implementation challenge is the question, how sustainability performance can be measured, especially for products and processes. This paper explores the current status of Life Cycle Sustainability Assessment (LCSA for products and processes. For the environmental dimension well established tools like Life Cycle Assessment are available. For the economic and social dimension, there is still need for consistent and robust indicators and methods. In addition to measuring the individual sustainability dimensions, another challenge is a comprehensive, yet understandable presentation of the results. The “Life Cycle Sustainability Dashboard” and the “Life Cycle Sustainability Triangle” are presented as examples for communication tools for both experts and non expert stakeholders.

Usefulness of analytical CEA doubling time and half-life time for overlooked synchronous metastases in colorectal carcinoma.

Science.gov (United States)

Ito, Katsuki; Hibi, Kenji; Ando, Hideyuki; Hidemura, Kazuhiko; Yamazaki, Taiji; Akiyama, Seiji; Nakao, Akimasa

2002-02-01

Measurement of carcinoembryonic antigen (CEA) has been widely applied to detect recurrence, especially of colorectal carcinoma. The validity however, is still controversial. We investigated serial changes in CEA values to calculate whether the CEA doubling time and half-life time could predict metastatic progression or prognosis in colorectal carcinoma. Pre- and post-operative serial serum CEA contents were determined in 22 cases of colorectal cancer with or without metastasis. CEA values were determined by enzyme immunoassay (EIA). Patients were assigned depending upon survival time (within vs. more than 18 months after primary resection) for assessment of CEA doubling time. From the gradient of the semi-logarithmic CEA graph, the preoperative doubling time was calculated and the postoperative half-life time was estimated according to the diagnosis of metastases within 2 years after primary resection [metastasis (+) or (-)]. In spite of the effect of curative re-operation of metastatic lesions or of postoperative adjuvant chemotherapy, the CEA doubling time of the groups showed a relation with prognosis (p = 0.045, Student's t-test) when the patients were divided into >18 and time. The CEA half-life time of the groups without overlooked metastases was statistically longer than those with (mean +/- SD 8.01 +/- 2.07 and 4.33 +/- 1.11, respectively, p Clearance (k) showed a significant difference between the groups (p time appeared to be a less independent prognostic factor, whereas prolongation of the CEA half-life time might potentially suggest the existence of overlooked synchronous metastases from colorectal carcinoma.

Code boiler and pressure vessel life assessment

International Nuclear Information System (INIS)

Farr, J.R.

1992-01-01

In the United States of America and in Canada, laws and controls for determining life assessment for continued operation of equipment exist only for those pressure vessels built to Section III and evaluated according to Section XI. In this presentation, some of those considerations which are made in the USA and Canada for deciding on life or condition assessment of boilers and pressure vessels designed and constructed to other sections of the ASME Boiler and Pressure Vessel Code are reviewed. Life assessment or condition assesssment is essential in determining what is necessary for continued operation. With no ASME rules being adopted by laws or regulations, other than OSHA in the USA and similar environmental controls in Canada, to control life assessment for continued operation, the equipment owner must decide if assessment is to be done and how much to do. Some of those considerations are reviewed along with methods and procedures to make an assessment along with a discussion of where the ASME B and PV Code currently stands regarding continued operation. (orig.)

A creep life assessment method for boiler pipes using small punch creep test

International Nuclear Information System (INIS)

Izaki, Toru; Kobayashi, Toshimi; Kusumoto, Junichi; Kanaya, Akihiro

2009-01-01

The small punch creep (SPC) test is considered as a highly useful method for creep life assessment for high temperature plant components. SPC uses miniature-sized specimens and does not cause any serious sampling damages, and its assessment accuracy is at a high level. However, in applying the SPC test to the residual creep life assessment of the boiler in service, there are some issues to be studied. In order to apply SPC test to the residual creep life assessment of the 2.25Cr-1Mo steel boiler pipe, the relationship between uniaxial creep stress and the SPC test load has been studied. The virgin material, pre-crept, weldment and service aged samples of 2.25Cr-1Mo steel were tested. It was confirmed that the relationship between uniaxial creep stress and the SPC test load at the same rupture time can be described as a single straight line independent of test conditions and materials. Therefore a life assessment is possible by using SPC test in place of uniaxial creep tests. The creep life assessment using SPC was applied to actual thermal power plant components which are in service.

Life Cycle Assessment of Greenhouse Gas Emissions

NARCIS (Netherlands)

Reijnders, L.; Chen, W.Y.; Suzuki, T.; Lackner, M.

2015-01-01

Life cycle assessments of greenhouse gas emissions have been developed for analyzing products "from cradle to grave": from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production, and waste

Life time fatality risk assessment due to variation of indoor radon concentration in dwellings in western Haryana, India

International Nuclear Information System (INIS)

Kansal, Sandeep; Mehra, Rohit; Singh, N.P.

2012-01-01

Indoor radon measurements in 60 dwellings belonging to 12 villages of Sirsa, Fatehbad and Hisar districts of western Haryana, India, have been carried out, using LR-115 type II cellulose nitrate films in the bare mode. The annual average indoor radon value in the studied area varies from 76.00 to 115.46 Bq m −3 , which is well within the recommended action level 200–300 Bq m −3 (). The winter/summer ratio of indoor radon ranges from 0.78 to 2.99 with an average of 1.52. The values of annual average dose received by the residents and Life time fatality risk assessment due to variation of indoor radon concentration in dwellings of studied area suggests that there is no significance threat to the human beings due to the presence of natural radon in the dwellings. - Highlights: ► The radon concentration values in the dwellings are 2–3 times more than the world average of 40 Bq m −3 . ► These values are lower than the recommended action level of 200–300 Bq m −3 (). ► The annual effective dose is less than the recommended action level of 3–10 mSv per year (). ► The values of life time fatality risk determined for the studied area are within safe standards. ► There is no significant threat to the human beings due to the presence of natural radon in the dwellings.

Defining the baseline in social life cycle assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas; Finkbeiner, Matthias; Jørgensen, Michael Søgaard

2010-01-01

A relatively broad consensus has formed that the purpose of developing and using the social life cycle assessment (SLCA) is to improve the social conditions for the stakeholders affected by the assessed product's life cycle. To create this effect, the SLCA, among other things, needs to provide...... valid assessments of the consequence of the decision that it is to support. The consequence of a decision to implement a life cycle of a product can be seen as the difference between the decision being implemented and 'non-implemented' product life cycle. This difference can to some extent be found...... using the consequential environmental life cycle assessment (ELCA) methodology to identify the processes that change as a consequence of the decision. However, if social impacts are understood as certain changes in the lives of the stakeholders, then social impacts are not only related to product life...

Life cycle assessment of greenhouse gas emissions

NARCIS (Netherlands)

Reijnders, L.; Chen, W.Y.; Seiner, J.; Suzuki, T.; Lackner, M.

2012-01-01

Life cycle assessments of greenhouse gas emissions have been developed for analyzing products "from cradle to grave": from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production and to waste

Life cycle assessment of greenhouse gas emissions

NARCIS (Netherlands)

Reijnders, L.; Chen, W.-Y.; Suzuki, T.; Lackner, M.

2017-01-01

Life cycle assessments of greenhouse gas emissions have been developed for analyzing products “from cradle to grave”: from resource extraction to waste disposal. Life cycle assessment methodology has also been applied to economies, trade between countries, aspects of production, and waste

Quality-of-life assessment in advanced cancer.

LENUS (Irish Health Repository)

Donnelly, S

2000-07-01

In the past 5 years, quality-of-life (QOL) assessment measures such as the McGill, McMaster, Global Visual Analogue Scale, Assessment of QOL at the End of Life, Life Evaluation Questionnaire, and Hospice QOL Index have been devised specifically for patients with advanced cancer. The developers of these instruments have tried to respond to the changing needs of this specific population, taking into account characteristics including poor performance status, difficulty with longitudinal study, rapidly deteriorating physical condition, and change in relevant issues. Emphasis has been placed on patient report, ease and speed of completion, and the existential domain or meaning of life. Novel techniques in QOL measurement have also been adapted for palliative care, such as judgment analysis in the Schedule for the Evaluation of Individual Quality of Life. It is generally agreed that a single tool will not cover all QOL assessment needs.

Developing the Social Life Cycle Assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas

social audits. Through an interview with a social auditor it is suggested that the auditor varies the procedures for carrying out the audit in order to get the most valid result. For example, the auditor has to take into account the various tricks a company in a given context normally uses to cheat......This thesis seeks to add to the development of the Social Life Cycle Assessment (SLCA), which can be defined as an assessment method for assessing the social impacts connected to the life cycle of a product, service or system. In such development it is important to realise that the SLCA is only...... appealing to the extent that it does what it is supposed to do. In this thesis, this goal of SLCA is defined as to support improvements of the social conditions for the stakeholders throughout the life cycle of the assessed product, system or service. This effect should arise through decision makers...

Life Style Assessment: So What!

Science.gov (United States)

Aubry, William E.

The construct life style was used by Alfred Adler to describe the characteristic way in which individuals act and think. Followers of his theories are now collecting evidence to support or validate his contentions. The assessment of client life styles serves: (1) to make the client aware of his misconceptions, (2) as a reference point for therapy,…

Life Cycle Assessment of Wall Systems

Science.gov (United States)

Ramachandran, Sriranjani

Natural resource depletion and environmental degradation are the stark realities of the times we live in. As awareness about these issues increases globally, industries and businesses are becoming interested in understanding and minimizing the ecological footprints of their activities. Evaluating the environmental impacts of products and processes has become a key issue, and the first step towards addressing and eventually curbing climate change. Additionally, companies are finding it beneficial and are interested in going beyond compliance using pollution prevention strategies and environmental management systems to improve their environmental performance. Life-cycle Assessment (LCA) is an evaluative method to assess the environmental impacts associated with a products' life-cycle from cradle-to-grave (i.e. from raw material extraction through to material processing, manufacturing, distribution, use, repair and maintenance, and finally, disposal or recycling). This study focuses on evaluating building envelopes on the basis of their life-cycle analysis. In order to facilitate this analysis, a small-scale office building, the University Services Building (USB), with a built-up area of 148,101 ft2 situated on ASU campus in Tempe, Arizona was studied. The building's exterior envelope is the highlight of this study. The current exterior envelope is made of tilt-up concrete construction, a type of construction in which the concrete elements are constructed horizontally and tilted up, after they are cured, using cranes and are braced until other structural elements are secured. This building envelope is compared to five other building envelope systems (i.e. concrete block, insulated concrete form, cast-in-place concrete, steel studs and curtain wall constructions) evaluating them on the basis of least environmental impact. The research methodology involved developing energy models, simulating them and generating changes in energy consumption due to the above mentioned

Specification of life cycle assessment in nuclear power plants

International Nuclear Information System (INIS)

Abbaspour, M.; Kargari, N.; Mastouri, R.

2008-01-01

Life Cycle Assessment is an environmental management tool for assessing the environmental impacts of a product of a process. life cycle assessment involves the evaluation of environmental impacts through all stages of life cycle of a product or process. In other words life cycle assessment has a c radle to grave a pproach. Some results of life cycle assessment consist of pollution prevention, energy efficient system, material conservation, economic system and sustainable development. All power generation technologies affect the environment in one way or another. The main environmental impact does not always occur during operation of power plant. The life cycle assessment of nuclear power has entailed studying the entire fuel cycle from mine to deep repository, as well as the construction, operation and demolition of the power station. Nuclear power plays an important role in electricity production for several countries. even though the use of nuclear power remains controversial. But due to the shortage of fossil fuel energy resources many countries have started to try more alternation to their sources of energy production. A life cycle assessment could detect all environmental impacts of nuclear power from extracting resources, building facilities and transporting material through the final conversion to useful energy services

An integrated life cycle inventory for demolition processes in the context of life cycle sustainability assessment

DEFF Research Database (Denmark)

Bozhilova-Kisheva, Kossara Petrova; Hu, Mingming; van Roekel, Eric

2012-01-01

According to the Life Cycle Assessment in Building and Construction: State-of-the-Art Report (2003), the dismantling and demolition stage of the building life cycle is only sometimes included in the Life Cycle Inventory (LCI) when doing Life Cycle Assessments (LCA). The reason that it is less...... inventoried in a traditional LCA maybe because this stage is expected to have a negligible environmental impact comparing to other stages in the life cycle of the buildings. When doing a life cycle sustainability assessment considering not only environmental but also economic and social impacts, the impacts...

Music Listening and Stress in Daily Life-a Matter of Timing.

Science.gov (United States)

Linnemann, Alexandra; Wenzel, Mario; Grammes, Jennifer; Kubiak, Thomas; Nater, Urs M

2018-04-01

Despite increasing evidence suggesting that music listening in daily life has stress-reducing effects, studies mostly rely on subjective, retrospective data on music listening. Thus, the temporal dynamics underlying the stress-reducing effect of music listening remain unclear. Therefore, we aimed to examine the temporal dynamics of the associations between stress and music listening by assessing subjective and objective data on music in daily life. An exploratory Ambulatory Assessment study examining a total of 60 participants (37 women), aged 18 to 34 years (M = 22.4 years, SD = 3.5) was conducted. For 1 week, participants answered questions on music listening and stress six times per day via an electronic diary device, which additionally objectively sampled the exact time point of music listening and its duration. Self-reports on mere music listening were associated with lower stress reports, whereas objectively assessed data was not. However, concerning duration of music listening, both subjective and objective data on music listening showed associations between a minimum of 20 min of music listening and lower stress reports. Concerning the latency, objective data on music listening revealed that the association between stress reports and music listening occurs in a time-delayed manner. Although the study design does not allow for causal inferences, substantial associations among subjectively and objectively assessed data on music listening were found to differentially affect the experience of stress after music listening. In particular, when focusing on the temporal dynamics, objectively assessed data allowed for a more fine-grained analysis. In consequence, subjectively and objectively reported data on music listening should be assessed jointly when investigating effects of music listening on health. Experimental research with rigorous methodological control is required in order to corroborate our findings in a laboratory setting.

Assessment of quality of life in patients with post kalaazar dermal leishmaniasis.

Science.gov (United States)

Pal, Biplab; Murti, Krishna; Siddiqui, Niyamat Ali; Das, Pradeep; Lal, Chandra Shekhar; Babu, Rajendra; Rastogi, Manoj Kumar; Pandey, Krishna

2017-07-24

Post kala-azar dermal leishmaniasis (PKDL) is a dermatological disorder caused by protozoal parasite Leishmania donovani. PKDL cases are thought to be a reservoir of parasites and may increase cases of visceral leishmaniasis. The disease is not life threatening but cosmetic disfigurement associated with it may impair the patients' quality of life. This study aimed to assess the health related quality of life in patients with post kalaazar dermal leishmanasis for the first time. A total of 92 PKDL cases and 96 healthy participants filled out the questionnaires. The Dermatology Life Quality Index (DLQI) and SF 36 questionnaire were used to assess the quality of life. Data on socio-demographic and clinical features were also collected. The collected data were analyzed by using SPSS software (version 16), Student's t-test, analysis of variance (ANOVA) was applied for comparison of means. PKDL patients experienced very large impact on their quality of life. The mean score of DLQI was 11.41. Highest impact was found in symptoms and feelings and lowest impact was observed for personal relationship domain. Patients below 20 years age group found to have lower quality of life. There was a significant difference in mean DLQI scores with regard to age and severity of lesions (P  0.05). PKDL significantly impaired the patient's quality of life. Further studies to assess the impact of treatment on quality of life in these patients are recommended.

Complementary use of life cycle assessment and risk assessment for engineered nanomaterials: Lessons learned from chemicals?

DEFF Research Database (Denmark)

Grieger, Khara D.; Laurent, Alexis; Miseljic, Mirko

2013-01-01

Successful strategies to handle the potential health and environmental risks of engineered nanomaterials (ENM) often rely upon the well-established frameworks of life cycle assessment (LCA) and risk assessment (RA). However, current research and specific guidance on how to actually apply these two...... scientific research efforts have taken into account some key lessons learned from past experiences with chemicals at the same time that many key challenges remain to applying these frameworks to ENM. In that setting, two main proposed approaches to use LCA and RA together for ENM are identified: i) LC......-based RA, similar to traditional RA applied in a life cycle perspective, and ii) RA-complemented LCA, similar to conventional LCA supplemented by RA in specific life cycle steps. This study finds that these two approaches for using LCA and RA together for ENM are similar to those made for chemicals...

Life Cycle Thinking in Impact Assessment

DEFF Research Database (Denmark)

Bidstrup, Morten

2015-01-01

It has been advocated that life cycle thinking (LCT) should be applied in impact assessment (IA) to a greater extent, since some development proposals pose a risk of significant impacts throughout the interconnected activities of product systems. Multiple authors have proposed the usage of life...

Improved methods of creep-fatigue life assessment of components

Energy Technology Data Exchange (ETDEWEB)

Scholz, Alfred; Berger, Christina [Inst. fuer Werkstoffkunde (IfW), Technische Univ. Darmstadt (Germany)

2009-07-01

The improvement of life assessment methods contributes to a reduction of efforts at design and an effective long term operation of high temperature components, reduces technical risk and increases high economical advantages. Creep-fatigue at multi-stage loading, covering cold start, warm start and hot start cycles in typical loading sequences e.g. for medium loaded power plants, was investigated here. At hold times creep and stress relaxation, respectively, lead to an acceleration of crack initiation. Creep fatigue life time can be calculated by a modified damage accumulation rule, which considers the fatigue fraction rule for fatigue damage and the life fraction rule for creep damage. Mean stress effects, internal stress and interaction effects of creep and fatigue are considered. Along with the generation of advanced creep data, fatigue data and creep fatigue data as well scatter band analyses are necessary in order to generate design curves and lower bound properties inclusive. Besides, in order to improve lifing methods the enhancement of modelling activities for deformation and life time are important. For verification purposes, complex experiments at variable creep conditions as well as at creep fatigue interaction under multi-stage loading are of interest. Generally, the development of methods to transfer uniaxial material properties to multiaxial loading situations is a current challenge. For specific design purposes, a constitutive material model is introduced which is implemented as an user subroutine for Finite Element applications due to start-up and shut-down phases of components. Identification of material parameters have been performed by Neural Networks. (orig.)

Assessment of decisions in the context of life attitudes

Directory of Open Access Journals (Sweden)

Klamut Ryszard

2012-01-01

Full Text Available Presented article attempts to show sense of life perspective as a determinant of decision making. It is assumed that the sense of life perspective described as life attitudes is significant in assessment of decision problem defined in the predecision phase of the decision making process. The predicted dependence was analysed in three categories of decision: self-development, financial and voting. The research was conducted on two groups of 186 and 86 participants. Two methods were used in the research: the Life Attitude Profile -Revised (LAP-R and the Decision Assessment Questionnaire. In statistical analysis, the canonical correlation analysis was used. The scores show that the life attitudes (especially: Purpose, Coherence, Life Control and Existential Vacuum are correlated with the assessment factor (especially: Cognitive Analysis and Affective Assessment of each tested category of decision. However, the most significant relationship is found in the self-development decision.

Assessment of life interference in anxious children

DEFF Research Database (Denmark)

Rapee, Ronald; Thastum, Mikael; Chavira, Denise

associated with mental disorders arguably the key issue of relevance to both sufferers and therapists. Yet among both childhood and adult disorders the primary focus in terms of assessment and treatment is on symptoms, with far less attention paid to the impact of these symptoms on the sufferer's life....... This imbalance has particularly characterised research on child anxiety where few studies have examined either the impact of anxiety disorders on children's lives or the effects of treatments on life interference. To some extent this lack of attention has come from a lack of well developed measures to assess...... life interference derived from symptoms of anxiety. Broader and more general life interference measures tend to have minimal relevance for children with anxiety disorders. The current paper will describe two measures of life interference that have been developed at the Centre for Emotional Health...

Assessment of distress and quality of life of cancer patients over the course of chemotherapy

Directory of Open Access Journals (Sweden)

Cristiane Decat Bergerot

2014-07-01

Full Text Available Objective. Assess the prevalence of distress and quality of life of cancer patients over the course of chemotherapy. Methodology. Longitudinal prospective study addressing 200 patients. The Distress Thermometer (DT and Functional Assessment of Chronic Illness Therapy-General (FACT-G, as indicators of distress and quality of life, were applied at three points in time during chemotherapy: the first day (T1, half way through the treatment (T2, and last day of medication (T3. Results. The average age was 56.8 years old, and 70% were women while the most frequent types of cancer included breast (30% and hematological (22% cancers. The number of patients with a high level of distress statistically decreased over time (T1=41.5%, T2=8.0% and T3=2.5%; consequently, quality of life scores improved (T1=85.6%, T2=90.4% and T3=92.0%. Patients with moderate to severe distress experienced worse quality of life. Distress, type of cancer and disease stage significantly impacted quality of life. Conclusion. There was a reduction in the time of impact from the side effects of chemotherapy in the patients as a consequence of adapting to the diagnosis and treatment. Continuous assessment of the needs of patients is essential to ensuring integral and humanized care, contributing to improved oncological nursing.

Non-destructive testing for plant life assessment

International Nuclear Information System (INIS)

2005-01-01

The International Atomic Energy Agency (IAEA) is promoting industrial applications of nondestructive testing (NDT) technology, which includes radiography testing (RT) and related methods, to assure safety and reliability of operation of industrial facilities and processes. NDT technology is essentially needed for improvement of the quality of industrial products, safe performance of equipment and plants, including safety of metallic and concrete structures and constructions. The IAEA is playing an important role in promoting the NDT use and technology support to Member States, in harmonisation for training and certification of NDT personnel, and in establishing national accreditation and certifying bodies. All these efforts have led to a stage of maturity and self sufficiency in numerous countries especially in the field of training and certification of personnel, and in provision of services to industries. This has had a positive impact on the improvement of the quality of industrial goods and services. NDT methods are primarily used for detection, location and sizing of surface and internal defects (in welds, castings, forging, composite materials, concrete and many more). Various NDT methods are applied for preventive maintenance (aircraft, bridge), for the inspection of raw materials, half-finished and finished products, for in-service-inspection and for plant life assessment studies. NDT is essential for quality control of the facilities and products, and for fitness - for purpose assessment (so-called plant life assessment). NDT evaluates remaining operation life of plant components (processing lines, pipes, vessels) providing an accurate diagnosis that allows predicting extended life operation beyond design life. Status and trends on the NDT for plant life assessment have been discussed in many IAEA meetings related with NDT development, training and education. Experts have largely demonstrated that, using NDT methods, a comprehensive assessment of the life

Life cycle assessment of electricity generation in Mexico

International Nuclear Information System (INIS)

Santoyo-Castelazo, E.; Gujba, H.; Azapagic, A.

2011-01-01

This paper presents for the first time a Life Cycle Assessment (LCA) study of electricity generation in Mexico. The electricity mix in Mexico is dominated by fossil fuels, which contribute around 79% to the total primary energy; renewable energies contribute 16.5% (hydropower 13.5%, geothermal 3% and wind 0.02%) and the remaining 4.8% is from nuclear power. The LCA results show that 225 TWh of electricity generate about 129 million tonnes of CO 2 eq. per year, of which the majority (87%) is due to the combustion of fossil fuels. The renewables and nuclear contribute only 1.1% to the total CO 2 eq. Most of the other LCA impacts are also attributed to the fossil fuel options. The results have been compared with values reported for other countries with similar electricity mix, including Italy, Portugal and the UK, showing good agreement. -- Highlights: → This paper presents for the first time a Life Cycle Assessment (LCA) study of electricity generation in Mexico. → 129 million tonnes of CO 2 eq. per year are emitted from 225 TWh of electricity generated per year of which 87% is due to the combustion of fossil fuels. → Coal technologies generate 1094 g CO 2 eq./kWh, heavy fuel oil 964 g CO 2 eq./kWh, and gas 468 g CO 2 eq./kWh; by contrast, nuclear and hydro emit 12 g CO 2 eq./kWh. → Heavy fuel oil contributes most to the life cycle environmental impacts (59-97%). → The results show good agreement with values reported for other countries with similar electricity mix, including Italy, Portugal and the UK.

Experimental Creep Life Assessment for the Advanced Stirling Convertor Heater Head

Science.gov (United States)

Krause, David L.; Kalluri, Sreeramesh; Shah, Ashwin R.; Korovaichuk, Igor

2010-01-01

The United States Department of Energy is planning to develop the Advanced Stirling Radioisotope Generator (ASRG) for the National Aeronautics and Space Administration (NASA) for potential use on future space missions. The ASRG provides substantial efficiency and specific power improvements over radioisotope power systems of heritage designs. The ASRG would use General Purpose Heat Source modules as energy sources and the free-piston Advanced Stirling Convertor (ASC) to convert heat into electrical energy. Lockheed Martin Corporation of Valley Forge, Pennsylvania, is integrating the ASRG systems, and Sunpower, Inc., of Athens, Ohio, is designing and building the ASC. NASA Glenn Research Center of Cleveland, Ohio, manages the Sunpower contract and provides technology development in several areas for the ASC. One area is reliability assessment for the ASC heater head, a critical pressure vessel within which heat is converted into mechanical oscillation of a displacer piston. For high system efficiency, the ASC heater head operates at very high temperature (850 C) and therefore is fabricated from an advanced heat-resistant nickel-based superalloy Microcast MarM-247. Since use of MarM-247 in a thin-walled pressure vessel is atypical, much effort is required to assure that the system will operate reliably for its design life of 17 years. One life-limiting structural response for this application is creep; creep deformation is the accumulation of time-dependent inelastic strain under sustained loading over time. If allowed to progress, the deformation eventually results in creep rupture. Since creep material properties are not available in the open literature, a detailed creep life assessment of the ASC heater head effort is underway. This paper presents an overview of that creep life assessment approach, including the reliability-based creep criteria developed from coupon testing, and the associated heater head deterministic and probabilistic analyses. The approach also

Development of a support system to make economic and technical assessments for the issues relating to plant life extension

International Nuclear Information System (INIS)

Takao, T.; Soneda, N.; Sakai, T.

1994-01-01

To realize the life extension of nuclear power plants, overall evaluation for the plant is required, which covers technology, economy such as cost of repair or/and replacement of components, and regal regulations for licensing. A prototype of integrated assessment support system for life extension ''INPLEX'' have developed in order to evaluate the technical and economic issues relating to the plant life extension and to make a life extension scenario. Analysis procedure of INPLEX is as follows. A comparison of the cost between the life extension and the reconstruction is made to see whether the life extension is cost effective or not. Next, components required detailed assessments are selected, and the residual life assessment of these components are made. After those procedures life extension measures are selected and the implementation time schedule is set on the basis of the formulas for predicting the degradation of the components and the component reliability data. Finally the implementation time schedule is optimized from the viewpoint of economy, and the life extension scenario is proposed. INPLEX also has the data base ''PRINS'', in which information and data related to life extension are registered, such as component degradation experiences, degradation management methodologies, degradation mitigation measures, and so on. PRINS can be referred at any time during the operation of INPLEX

Towards a Life Cycle Based Chemical Alternative Assessment (LCAA)

DEFF Research Database (Denmark)

Jolliet, O.; Huang, L.; Overcash, Michael

2017-01-01

approach combines the following elements: a) The manufacturing phase chemical inventory is based on the environmental genome of industrial products database, ensuring mass and energy balance, b) near-field exposure to consumer products during the use phase is determined based on the mass of chemical......There is a need for an operational quantitative screening-level assessment of alternatives, that is life-cycle based and able to serve both Life cycle Assessment (LCA and chemical alternatives assessment (CAA). This presentation therefore aims to develop and illustrate a new approach called “Life...... Cycle Based Chemical Alternative Assessment (LCAA)” that will quantify exposure and life cycle impacts consistently and efficiently over the main life cycle stages. The new LCAA approach is illustrated though a proof-of-concept case study of alternative plasticizers in vinyl flooring. The proposed LCAA...

Methodologies for Social Life Cycle Assessment

DEFF Research Database (Denmark)

Jørgensen, Andreas; Le Bocq, Agathe; Nazakina, Liudmila

2008-01-01

Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several similarit......Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several...... similarities with other social assessment tools, but in order to limit the review, only claims to address social impacts from an LCA-like framework is considered. Main Features. The review is to a large extent based on conference proceedings and reports of which some are not easily accessible, since very...... stage in the product life cycle. Another very important difference among the proposals is their position towards the use of generic data. Several of the proposals argue that social impacts are connected to the conduct of the company leading to the conclusion that each individual company in the product...

Social Life Cycle Assessment: An Introduction

DEFF Research Database (Denmark)

Moltesen, Andreas; Bonou, Alexandra; Wangel, Arne

2018-01-01

An expansion of the LCA framework has been going on through the development of ‘social life cycle assessment’—S-LCA. The methodology, still in its infancy, has the goal of assessing social impacts related to a product’s life cycle. This chapter introduces S-LCA framework area and the related...

Antifreeze life cycle assessment (LCA

Directory of Open Access Journals (Sweden)

Kesić Jelena

2005-01-01

Full Text Available Antifreeze based on ethylene glycol is a commonly used commercial product The classification of ethylene glycol as a toxic material increased the disposal costs for used antifreeze and life cycle assessment became a necessity. Life Cycle Assessment (LCA considers the identification and quantification of raw materials and energy inputs and waste outputs during the whole life cycle of the analyzed product. The objectives of LCA are the evaluation of impacts on the environment and improvements of processes in order to reduce and/or eliminate waste. LCA is conducted through a mathematical model derived from mass and energy balances of all the processes included in the life cycle. In all energy processes the part of energy that can be transformed into some other kind of energy is called exergy. The concept of exergy considers the quality of different types of energy and the quality of different materials. It is also a connection between energy and mass transformations. The whole life cycle can be described by the value of the total loss of exergy. The physical meaning of this value is the loss of material and energy that can be used. The results of LCA are very useful for the analyzed products and processes and for the determined conditions under which the analysis was conducted. The results of this study indicate that recycling is the most satisfactory solution for the treatment of used antifreeze regarding material and energy consumption but the re-use of antifreeze should not be neglected as a solution.

Comparison of conventional Injection Mould Inserts to Additively Manufactured Inserts using Life Cycle Assessment

DEFF Research Database (Denmark)

Hofstätter, Thomas; Bey, Niki; Mischkot, Michael

2016-01-01

Polymer Additive Manufacturing can be used to produce soft tooling inserts for injection moulding. Compared to conventional tooling, the energy and time consumption during production are significantly lower. As the life time of such inserts is significantly shorter than the life time of traditional...... of their potential environmental impact and yield throughout the development and pilot phase. Insert geometry is particularly advantageous for pilot production and small production sizes. In this research, Life Cycle Assessment is used to compare the environmental impact of soft tooling by Additive Manufacturing...... (using Digital Light Processing) and three traditional methods for the manufacture of inserts (milling of brass, steel, and aluminium) for injection moulds during the pre-production phase....

Quality of life assessment of children with thalassemia

OpenAIRE

Masyitah Sri Wahyuni; Muhammad Ali; Nelly Rosdiana; Bidasari Lubis

2011-01-01

Background Thalassemia is a chronic disease that is becoming a major health problem in the world, including the Mediterranean, as well as Malaysia, Thailand and Indonesia. This condition clearly affects the patient's quality of life, because of the condition itself and the effects of treatment. Assessment is needed to detennine actions to be taken to improve the quality of life in thalassemic children. Objective To assess the differences in quality of life of thalassemic children comp...

Differential time preferences for money and quality of life

NARCIS (Netherlands)

Parouty, M. B. Y.; Le, Hoa; Krooshof, D.; Postma, M. J.

Background This study provides an empirical investigation into differential time preferences between money and quality of life. Thus far, time preference investigations in health have mostly involved life-years gained and lives saved. However, the quality-adjusted life-year, which is recommended by

Application of Life Cycle Assessment on Electronic Waste Management: A Review

Science.gov (United States)

Xue, Mianqiang; Xu, Zhenming

2017-04-01

Electronic waste is a rich source of both valuable materials and toxic substances. Management of electronic waste is one of the biggest challenges of current worldwide concern. As an effective and prevailing environmental management tool, life cycle assessment can evaluate the environmental performance of electronic waste management activities. Quite a few scientific literatures reporting life cycle assessment of electronic waste management with significant outcomes have been recently published. This paper reviewed the trends, characteristics, research gaps, and challenges of these studies providing detailed information for practitioners involved in electronic waste management. The results showed that life cycle assessment studies were most carried out in Europe, followed by Asia and North America. The research subject of the studies mainly includes monitors, waste printed circuit boards, mobile phones, computers, printers, batteries, toys, dishwashers, and light-emitting diodes. CML was the most widely used life cycle impact assessment method in life cycle assessment studies on electronic waste management, followed by EI99. Furthermore, 40% of the reviewed studies combined with other environmental tools, including life cycle cost, material flow analysis, multi-criteria decision analysis, emergy analysis, and hazard assessment which came to more comprehensive conclusions from different aspects. The research gaps and challenges including uneven distribution of life cycle assessment studies, life cycle impact assessment methods selection, comparison of the results, and uncertainty of the life cycle assessment studies were examined. Although life cycle assessment of electronic waste management facing challenges, their results will play more and more important role in electronic waste management practices.

Psychometric Analysis of the Work/Life Balance Self-Assessment Scale.

Science.gov (United States)

Smeltzer, Suzanne C; Cantrell, Mary Ann; Sharts-Hopko, Nancy C; Heverly, Mary Ann; Jenkinson, Amanda; Nthenge, Serah

2016-01-01

This study investigated the psychometric properties of the Work/Life Balance Self-Assessment scale among nurse faculty involved in doctoral education. A national random sample of 554 respondents completed the Work/Life Balance Self-Assessment scale, which addresses 3 factors: work interference with personal life (WIPL), personal life interference with work (PLIW), and work/personal life enhancement (WPLE). A principal components analysis with varimax rotation revealed 3 internally consistent aspects of work-life balance, explaining 40.5% of the variance. The Cronbach's alpha coefficients for reliability of the scale were .88 for the total scale and for the subscales, .93 (WIPL), .85 (PLIW), and .69 (WPLE). The Work/Life Balance Self-Assessment scale appears to be a reliable and valid instrument to examine work-life balance among nurse faculty.

Life through time and space

CERN Document Server

Arthur, Wallace

2017-01-01

All humans share three origins: the beginning of our individual lives, the appearance of life on Earth, and the formation of our planetary home. Life through Time and Space brings together the latest discoveries in both biology and astronomy to examine our deepest questions about where we came from, where we are going, and whether we are alone in the cosmos. A distinctive voice in the growing field of astrobiology, Wallace Arthur combines embryological, evolutionary, and cosmological perspectives to tell the story of life on Earth and its potential to exist elsewhere in the universe. He guides us on a journey through the myriad events that started with the big bang and led to the universe we inhabit today. Along the way, readers learn about the evolution of life from a primordial soup of organic molecules to complex plants and animals, about Earth's geological transformation from barren rock to diverse ecosystems, and about human development from embryo to infant to adult. Arthur looks closely at the history...

Early Life Factors and Adult Leisure Time Physical Inactivity Stability and Change.

Science.gov (United States)

Pinto Pereira, Snehal M; Li, Leah; Power, Chris

2015-09-01

Physical inactivity has a high prevalence and associated disease burden. A better understanding of influences on sustaining and changing inactive lifestyles is needed. We aimed to establish whether leisure time inactivity was stable in midadulthood and whether early life factors were associated with inactivity patterns. In the 1958 British birth cohort (n = 12,271), leisure time inactivity (frequency, less than once a week) assessed at 33 and 50 yr was categorized as "never inactive," "persistently inactive," "deteriorating," or "improving." Early life factors (birth to 16 yr) were categorized into three (physical, social, and behavioral) domains. Using multinomial logistic regression, we assessed associations with inactivity persistence and change of factors within each early life domain and the three domains combined with and without adjustment for adult factors. Inactivity prevalence was similar at 33 and 50 yr (approximately 31%), but 17% deteriorated and 18% improved with age. In models adjusted for all domains simultaneously, factors associated with inactivity persistence versus never inactive were prepubertal stature (8% lower risk/height SD), poor hand control/coordination (17% higher risk/increase on four-point scale), cognition (16% lower/SD in ability) (physical); parental divorce (25% higher), class at birth (7% higher/reduction on four-point scale), minimal parental education (16% higher), household amenities (2% higher/increase in 19-point score (high = poor)) (social); and inactivity (22% higher/reduction in activity on four-point scale), low sports aptitude (47% higher), smoking (30% higher) (behavioral). All except stature, parental education, sports aptitude, and smoking were associated also with inactivity deterioration. Poor hand control/coordination was the only factor associated with improved status (13% lower/increase on four-point scale) versus persistently inactive. Adult leisure time inactivity is moderately stable. Early life factors are

Life time income of men and women

DEFF Research Database (Denmark)

Bonke, Jens

1992-01-01

Life-time income is estimated here including the money value of household work. A modified opportunity principle is used, which means that non-employed women's price of time is found by calculating reservation wage rates. The overall results demonstrate that Danish women's ‘loss' of labour income...... during the child caring period is difficult for them to regain, and just to reach the same level of income as childless Danish women seems impossible; furthermore Danish men get a higher life-time income than Danish women even when we add the money value of household work...

Comparative life cycle assessment of disposable and reusable laryngeal mask airways.

Science.gov (United States)

Eckelman, Matthew; Mosher, Margo; Gonzalez, Andres; Sherman, Jodi

2012-05-01

Growing awareness of the negative impacts from the practice of health care on the environment and public health calls for the routine inclusion of life cycle criteria into the decision-making process of device selection. Here we present a life cycle assessment of 2 laryngeal mask airways (LMAs), a one-time-use disposable Unique™ LMA and a 40-time-use reusable Classic™ LMA. In life cycle assessment, the basis of comparison is called the "functional unit." For this report, the functional unit of the disposable and reusable LMAs was taken to be maintenance of airway patency by 40 disposable LMAs or 40 uses of 1 reusable LMA. This was a cradle-to-grave study that included inputs and outputs for the manufacture, transport, use, and waste phases of the LMAs. The environmental impacts of the 2 LMAs were estimated using SimaPro life cycle assessment software and the Building for Environmental and Economic Sustainability impact assessment method. Sensitivity and simple life cycle cost analyses were conducted to aid in interpretation of the results. The reusable LMA was found to have a more favorable environmental profile than the disposable LMA as used at Yale New Haven Hospital. The most important sources of impacts for the disposable LMA were the production of polymers, packaging, and waste management, whereas for the reusable LMA, washing and sterilization dominated for most impact categories. The differences in environmental impacts between these devices strongly favor reusable devices. These benefits must be weighed against concerns regarding transmission of infection. Health care facilities can decrease their environmental impacts by using reusable LMAs, to a lesser extent by selecting disposable LMA models that are not made of certain plastics, and by ordering in bulk from local distributors. Certain practices would further reduce the environmental impacts of reusable LMAs, such as increasing the number of devices autoclaved in a single cycle to 10 (-25% GHG

Shelf-life Assessment of Food Undergoing Oxidation-A Review.

Science.gov (United States)

Calligaris, Sonia; Manzocco, Lara; Anese, Monica; Nicoli, Maria Cristina

2016-08-17

Oxidation is the most common event leading to the end of shelf life of microbiologically stable foods. Thus, a reliable shelf-life assessment is crucial to verify how long the product will last before it becomes oxidized to an unacceptable level to the consumers. Shelf-life assessment strategies of foods and beverages suffering oxidation are critically discussed focusing on definition of the acceptability limit, as well as the choice of the proper oxidative indicators, and methodologies for shelf-life testing. Testing methodologies for shelf-life determination under actual and accelerated storage conditions are considered, highlighting possible uncertainties, pitfalls, and future research needs.

Life cycle assessment of electronic waste treatment

International Nuclear Information System (INIS)

Hong, Jinglan; Shi, Wenxiao; Wang, Yutao; Chen, Wei; Li, Xiangzhi

2015-01-01

Highlights: • Life cycle assessment of electronic waste recycling is quantified. • Key factors for reducing the overall environmental impact are indentified. • End-life disposal processes provide significant environmental benefits. • Efficiently reduce the improper disposal amount of e-waste is highly needed. • E-waste incineration can generate significant environmental burden. - Abstract: Life cycle assessment was conducted to estimate the environmental impact of electronic waste (e-waste) treatment. E-waste recycling with an end-life disposal scenario is environmentally beneficial because of the low environmental burden generated from human toxicity, terrestrial ecotoxicity, freshwater ecotoxicity, and marine ecotoxicity categories. Landfill and incineration technologies have a lower and higher environmental burden than the e-waste recycling with an end-life disposal scenario, respectively. The key factors in reducing the overall environmental impact of e-waste recycling are optimizing energy consumption efficiency, reducing wastewater and solid waste effluent, increasing proper e-waste treatment amount, avoiding e-waste disposal to landfill and incineration sites, and clearly defining the duties of all stakeholders (e.g., manufacturers, retailers, recycling companies, and consumers)

Life cycle assessment of electronic waste treatment

Energy Technology Data Exchange (ETDEWEB)

Hong, Jinglan, E-mail: hongjing@sdu.edu.cn [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Shandong University Climate Change and Health Center, Public Health School, Shandong University, Jinan 250012 (China); Shi, Wenxiao [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Wang, Yutao [School of Life Science, Shandong University, Shanda South Road 27, Jinan 250100 (China); Chen, Wei [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Li, Xiangzhi, E-mail: xiangzhi@sdu.edu.cn [School of Medicine, Shandong University, Jinan 250012 (China)

2015-04-15

Highlights: • Life cycle assessment of electronic waste recycling is quantified. • Key factors for reducing the overall environmental impact are indentified. • End-life disposal processes provide significant environmental benefits. • Efficiently reduce the improper disposal amount of e-waste is highly needed. • E-waste incineration can generate significant environmental burden. - Abstract: Life cycle assessment was conducted to estimate the environmental impact of electronic waste (e-waste) treatment. E-waste recycling with an end-life disposal scenario is environmentally beneficial because of the low environmental burden generated from human toxicity, terrestrial ecotoxicity, freshwater ecotoxicity, and marine ecotoxicity categories. Landfill and incineration technologies have a lower and higher environmental burden than the e-waste recycling with an end-life disposal scenario, respectively. The key factors in reducing the overall environmental impact of e-waste recycling are optimizing energy consumption efficiency, reducing wastewater and solid waste effluent, increasing proper e-waste treatment amount, avoiding e-waste disposal to landfill and incineration sites, and clearly defining the duties of all stakeholders (e.g., manufacturers, retailers, recycling companies, and consumers)

LIFE CYCLE ASSESSMENT FOR PC BLEND 2 AIRCRAFT RADOME DEPAINTER

Science.gov (United States)

This report describes the life cycle assessment on a potential replacement solvent blend for aircraft radome depainting at the Oklahoma City Air Logistics Center at Tinker Air Force Base. The life cycle assessment is composed of three separate but interrelated components: life cy...

Measuring work-life balance using time diary data

OpenAIRE

Kimberly Fisher; Richard Layte

2004-01-01

This paper examines how time diaries facilitate the study of work-life balance. We first compare aggregate time spent in paid work, unpaid work, attending to personal needs, and free time across seven countries using the Multinational Time Use Study. We then measure the overlap of work with other activities in two ways. First, we map the timing of episodes of work over the day, and overlay these maps onto maps of leisure time. A social group can be said to have a work-life balance if their pe...

Application of structural reliability and risk assessment to life prediction and life extension decision making

International Nuclear Information System (INIS)

Meyer, T.A.; Balkey, K.R.; Bishop, B.A.

1987-01-01

There can be numerous uncertainties involved in performing component life assessments. In addition, sufficient data may be unavailable to make a useful life prediction. Structural Reliability and Risk Assessment (SRRA) is primarily an analytical methodology or tool that quantifies the impact of uncertainties on the structural life of plant components and can address the lack of data in component life prediction. As a prelude to discussing the technical aspects of SRRA, a brief review of general component life prediction methods is first made so as to better develop an understanding of the role of SRRA in such evaluations. SRRA is then presented as it is applied in component life evaluations with example applications being discussed for both nuclear and non-nuclear components

Life cycle assessment of renewable energy sources

CERN Document Server

Singh, Anoop; Olsen, Stig Irving

2013-01-01

Governments are setting challenging targets to increase the production of energy and transport fuel from sustainable sources. The emphasis is increasingly on renewable sources including wind, solar, geothermal, biomass based biofuel, photovoltaics or energy recovery from waste. What are the environmental consequences of adopting these other sources? How do these various sources compare to each other? Life Cycle Assessment of Renewable Energy Sources tries to answer these questions based on the universally adopted method of Life Cycle Assessment (LCA). This book introduces the concept and impor

[Life satisfaction and self-esteem among women in the menopausal time].

Science.gov (United States)

Banaczek, Zbigniew; Saracen, Agnieszka

2016-01-01

The period of menopause is usually a long-lasting, running process, with strong hormone changes which are manifested with somatic disorders and the lability of the emotional state. The degree of severity of the occurence of these symptoms can be variously bolstered. These changes can affect the quality of life and ones self-esteem. To assess the level of self-esteem of biopsychosocial functioning women in the menopausal time and the impact of menopause on women's quality of life. A group of 90 women in perimenopausal aged 49-61 were enrolled in the study. Standardized psychological questionnaires (Kupperman Index, SES Rosenberg and WHOQoL-BREF) were used. Additional data was collected by using a questionnaire developed by the authors. In statistical analysis χ2, analysis of variance and Spearman's rank correlation models were used. A significant correlation relationship between level of education and the sphere of psychological evaluation (p life in the social (p 25 indicating the correct (in the normal or higher range) self-esteem. In the studied group, women believe that they have the correct (in the normal or higher range) self-esteem. The surveyed women found as good their quality of life, the highest rated was social and psychological sphere, the lowest score received sphere of physical functioning (somatic). A statistically significant correlations were achieved between home and professional activity, and the assessment of the quality of life in the social and environmental sphere. The analysis showed a significant association correlation between level of education of women and the sphere of psychological evaluation.

Addressing the effect of social life cycle assessments

DEFF Research Database (Denmark)

Jørgensen, Andreas; Dreyer, Louise Camilla; Wangel, Arne

2012-01-01

the validity of these hypotheses. Results: Three in some cases potentially overlapping SLCA approaches are presented, assumed to create a beneficial effect in the life cycle in different ways. However, empirical and theoretical findings show that the beneficial effects proposed to arise from the use of each......Purpose: In the recently published ‘Guidelines for social life cycle assessment of products’, it is stated that the ultimate objective of developing the social life cycle assessment (SLCA) is to promote improvements of social conditions for the stakeholders in the life cycle. This article addresses...... how the SLCA should be developed so that its use promotes these improvements. Methods: Hypotheses of how the use of SLCA can promote improvement of social conditions in the life cycle are formulated, after which theories and empirical findings from relevant fields of research are used to address...

A framework for social life cycle impact assessment

DEFF Research Database (Denmark)

Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

2006-01-01

Goal, Scope and Background. To enhance the use of life cycle assessment (LCA) as a tool in business decision-making, a methodology for Social life cycle impact assessment (LCIA) is being developed. Social LCA aims at facilitating companies to conduct business in a socially responsible manner...... by providing information about the potential social impacts on people caused by the activities in the life cycle of their product. The development of the methodology has been guided by a business perspective accepting that companies, on the one hand, have responsibility for the people affected...... in the life cycle rather than to the individual industrial processes, as is the case in Environmental LCA. Inventory analysis is therefore focused on the conduct of the companies engaged in the life cycle. A consequence of this view is that a key must be determined for relating the social profiles...

Spatial differentiated effect assessment for aquatic eutrophication in Life Cycle Assessment.

NARCIS (Netherlands)

Penailillo, Reinaldo

2005-01-01

The conventional evaluation of aquatic eutrophication in Life Cycle Assessment (LCA) expresses the contribution of nitrogen and/or phosphorus emissions to biomass production in terms of the equivalent emission of a reference substance. This assessment doe

Life cycle assessment (LCA) and exergetic life cycle assessment (ELCA) of the production of biodiesel from used cooking oil (UCO)

International Nuclear Information System (INIS)

Talens Peiro, L.; Lombardi, L.; Villalba Mendez, G.; Gabarrell i Durany, X.

2010-01-01

The paper assesses the life cycle of biodiesel from used cooking oil (UCO). Such life cycle involves 4 stages: 1) collection, 2) pre-treatment, 3) delivery and 4) transesterification of UCO. Generally, UCO is collected from restaurants, food industries and recycling centres by authorised companies. Then, UCO is pre-treated to remove solid particles and water to increase its quality. After that, it is charged in cistern trucks and delivered to the biodiesel facility to be then transesterified with methanol to biodiesel. The production of 1 ton of biodiesel is evaluated by a Life Cycle Assessment (LCA) to assess the environmental impact and by an Exergetic Life Cycle Assessment (ELCA) to account for the exergy input to the system. A detailed list of material and energy inputs is done using data from local companies and completed using Ecoinvent 1.2 database. The results show that the transesterification stage causes 68% of the total environmental impact. The major exergy inputs are uranium and natural gas. If targets set by the Spanish Renewable Energy Plan are achieved, the exergy input for producing biodiesel would be reduced by 8% in the present system and consequently environmental impacts and exergy input reduced up to 36% in 2010.

Use of dynamic Bayesian networks for life extension assessment of ageing systems

International Nuclear Information System (INIS)

Ramírez, Pedro A. Pérez; Utne, Ingrid Bouwer

2015-01-01

Extending the operating lifetime of ageing technical systems is of great interest for industrial applications. Life extension requires identifying and selecting decision alternatives which allow for a safe and economic operation of the system beyond its design lifetime. This article proposes a dynamic Bayesian network for assessing the life extension of ageing repairable systems. The main objective of the model is to provide decision support based on the system performance during a finite time horizon, which is defined by the life extension period. The model has three main applications: (i) assessing and selecting optimal decision alternatives for the life extension at present time, based on historical data; (ii) identifying and minimizing the factors that have a negative impact on the system performance; and (iii) reassessing and optimizing the decision alternatives during operation throughout the life extension period, based on updating the model with new operational data gathered. A case study illustrates the application of the model for life extension of a real firewater pump system in an oil and gas facility. The case study analyzes three decision alternatives, where preventive maintenance and functional test policies are optimized, and the uncertainty involved in each alternative is computed. - Highlights: • A dynamic Bayesian network is used for predicting the system performance. • The performance is measured with relevant variables: cost; unavailability; safety. • The model can be used when scarce data is available, no degradation data is needed. • The uncertainty associated to each alternative is computed in the model. • A detailed case study of a real safety system shows the applicability of the model

Life cycle assessment of peat utilisation in Finland

International Nuclear Information System (INIS)

Maelkki, H.

1997-01-01

Environmental issues related to the production of peat and its use in energy generation have been the subject of public debate and research over the past few years in Finland. Peat is both an indigenous and a locally utilised fuel. Finland has no fossil fuel resources, and the transportation distances of imported fuels into Finland are normally long. In Finland the large peat resources can be utilised locally and peat-burning power plants are situated near the peatlands. Peat production and energy conversion methods are being continuously developed to make use of the environmentally and technically best available technology. In Finland peat formation exceeds peat utilisation and an increase in peat utilisation is therefore sustainable. The life cycle assessment concept gives an opportunity to evaluate and improve the environmental quality of peat utilisation options. The study focuses on an inventory analysis, but some of the most common methods of impact assessment with valuation are also included. The study also includes a comparison of fossil fuels and a discussion part. All the calculated results are based on net emissions. The background emissions of natural peatland are subtracted from the emissions of the utilisation phases. Milled peat and sod peat are reported in this study. Horticultural peat is studied simultaneously, but it will be reported later. The Sod Wave, Haku and Tehoturve methods are studied for the production of peat. The power plants of the study are Kempele heating plant and Rauhalahti cogeneration plant. The functional unit is 1 MWh produced total energy. The temporal boundaries vary from 112 to 128 years, depending on the peat production methods used. The restoration time is 100 years in all options. The emissions of greenhouse gases are based on the reports of The Finnish Research Programme on Climate Change. The water emissions are based on control monitoring reports from 1994 and 1995. The water emissions of the restoration phase are

Health-related Quality of Life and Related Factors in Full-time and Part-time Workers.

Science.gov (United States)

Kim, Byungsung; Kim, Wonjoon; Choi, Hyunrim; Won, Changwon; Kim, Youngshin

2012-07-01

There has been a rapid increase in the number of part-time workers in Korea with little information available on associated changes in quality of life. This study was designed to compare part-time and full-time workers in terms of the quality of life and related factors. Data were extracted from the 4th Korea National Health and Nutrition Examination Survey, conducted in 2008. Of the 1,284 participants selected, 942 were females (range, 20 to 64 years). Based on the information provided by self-administered questionnaire, subjects were categorized according to the working pattern (full-time and part-time) and working hours (part-time group was associated with poorer quality of life (odds ratio [OR], 0.49; P = 0.028). For both sexes, the non-stress group was linked with superior quality of life in comparison to the stress group (OR, 2.64; P = 0.002; OR, 2.17; P < 0.001). Female employees engaged in non-manual labor had superior quality of life than those engaged in manual labor (OR, 1.40; P = 0.027). This study concludes that working less than 30 hours per week is related to lower quality of life in comparison to working 30 hours or more in male employees in Korea.

Assessing subjective quality of life domains after multiple sclerosis diagnosis disclosure.

Science.gov (United States)

Mattarozzi, Katia; Casini, Federica; Baldin, Elisa; Baldini, Martina; Lugaresi, Alessandra; Milani, Paola; Pietrolongo, Erika; Gajofatto, Alberto; Leone, Maurizio; Riise, Trond; Vignatelli, Luca; D'Alessandro, Roberto

2016-04-01

An investigation of the domains Italian patients with multiple sclerosis (MS) named as constituting their quality of life over time. We assessed, in 68 patients, QoL domains using the Schedule for the Evaluation of Individual QoL: (a) before MS diagnosis disclosure, (b) thirty days after disclosure, and (c) after one and (d) four years' follow-up. The life domains most frequently named by patients were as follows: Family, Work and Finance, Hobbies, Health, Relationship with Friends and Job Effectiveness. Only Health and Job Effectiveness domains varied with time. The Health domain became a critical dimension when MS diagnosis was revealed. In addition, patients tended to be more satisfied with their health after disclosure compared to pre-diagnosis. Job Effectiveness seemed to be an important aspect until 1 year after diagnosis disclosure, but it tended to become less crucial over time. Family seems to be the most important domain over time, and psychological adaptation to MS seems to be characterized by a reconceptualization of aspects that revolve around oneself, such as professional success, rather than relational or affective factors. Evaluating the most relevant life domains for patients and their alteration over time may provide practitioners with an important tool in making health-related decisions, thus improving health outcomes and QoL. © 2015 John Wiley & Sons Ltd.

An integrated life cycle sustainability assessment of electricity generation in Turkey

International Nuclear Information System (INIS)

Atilgan, Burcin; Azapagic, Adisa

2016-01-01

This paper presents for the first time an integrated life cycle sustainability assessment of the electricity sector in Turkey, considering environmental, economic and social aspects. Twenty life cycle sustainability indicators (11 environmental, three economic and six social) are used to evaluate the current electricity options. Geothermal power is the best option for six environmental impacts but it has the highest capital costs. Small reservoir and run-of-river power has the lowest global warming potential while large reservoir is best for the depletion of elements and fossil resources, and acidification. It also has the lowest levelised costs, worker injuries and fatalities but provides the lowest life cycle employment opportunities. Gas power has the lowest capital costs but it provides the lowest direct employment and has the highest levelised costs and ozone layer depletion. Given these trade-offs, a multi-criteria decision analysis has been carried out to identify the most sustainable options assuming different stakeholder preferences. For all the preferences considered, hydropower is the most sustainable option for Turkey, followed by geothermal and wind electricity. This work demonstrates the importance for energy policy of an integrated life cycle sustainability assessment and how tensions between different aspects can be reconciled to identify win-win solutions. - Highlights: •First integrated life cycle sustainability assessment of the electricity sector in Turkey. •11 environmental, three economic and six social sustainability indicators estimated. •Multi-criteria decision analysis carried out to identify most sustainable options. •Hydro is the most sustainable option for Turkey, followed by geothermal and wind. •This work demonstrates how tensions among sustainability aspects can be reconciled.

Life-cycle assessment of biodiesel versus petroleum diesel fuel

International Nuclear Information System (INIS)

Coulon, R.; Camobreco, V.; Sheehan, J.; Duffield, J.

1995-01-01

The US Department of Energy's Office of Transportation Technologies, DOE's National Renewable Energy Laboratory, the US Department of Agriculture's Office of Energy, and Ecobalance are carrying out a comprehensive Life-Cycle Assessment of soy-based diesel fuel (biodiesel) to quantify the environmental aspects of the cradle-to-grave production and use of biodiesel. The purpose of the project is to produce an analytical tool and database for use by industry and government decision makers involved in alternative fuel use and production. The study also includes a parallel effort to develop a life-cycle model for petroleum diesel fuel. The two models are used to compare the life-cycle energy and environmental implications of petroleum diesel and biodiesel derived from soybean. Several scenarios are studied, analyzing the influence of transportation distances, agricultural practice and allocation rules used. The project also includes effort to integrate spatial data into the inventory analysis and probabilistic uncertainty considerations into the impact assessment stage. Traditional life-cycle inventory analysis includes an aggregation process that eliminates spatial, temporal, and threshold information. This project will demonstrate an approach to life-cycle inventory analysis that retains spatial data for use in impact assessment. Explicit probabilistic treatment of uncertainty in impact assessment will take account of scientific uncertainties, and will attempt to identify the level of spatial detail that most efficiently reduces impact assessment uncertainties

Turbine casing bolts; a life assessment and bolt replacement strategy

Energy Technology Data Exchange (ETDEWEB)

Bulloch, J H [ESB, Power Generation, Dublin (Ireland)

1999-12-31

The present presentation describes a detailed study concerning the life assessment and replacement strategy of large turbine casing bolts in a 120 MW steam raising unit. After 122000 hours service, circa 1991/92, the Cr-Mo-V steel casing bolts, involving a total of 184 bolts, from two identical 120 MW units, termed Units 1 and 2, were examined to establish the extent of Reverse Temper Embrittlement, RTE, and creep damage suffered during service. The bolt replacement plans for the two units were as follows; Unit 1 bolts were completely replaced with new bolts while Unit 2 embrittled bolts were withdrawn from service and replaced with Non- Embrittled bolts from Unit 1; basically Unit 2 bolts were made up from a mixture of Unit 1 and 2 Non- Embrittled bolts which had been in service for 122000 hours. Remnant life assessments, concerning both embrittlement and creep damage aspects, were earned out on this series of easing bolts at service times 122000, 150000 and 200000 hours. These assessments involved the use of general embrittlement and creep damage laws which were empirically derived and concerned such parameters as microstructural grain size, bulk phosphorus content and accumulated service strain. (orig.) 7 refs.

Turbine casing bolts; a life assessment and bolt replacement strategy

Energy Technology Data Exchange (ETDEWEB)

Bulloch, J.H. [ESB, Power Generation, Dublin (Ireland)

1998-12-31

The present presentation describes a detailed study concerning the life assessment and replacement strategy of large turbine casing bolts in a 120 MW steam raising unit. After 122000 hours service, circa 1991/92, the Cr-Mo-V steel casing bolts, involving a total of 184 bolts, from two identical 120 MW units, termed Units 1 and 2, were examined to establish the extent of Reverse Temper Embrittlement, RTE, and creep damage suffered during service. The bolt replacement plans for the two units were as follows; Unit 1 bolts were completely replaced with new bolts while Unit 2 embrittled bolts were withdrawn from service and replaced with Non- Embrittled bolts from Unit 1; basically Unit 2 bolts were made up from a mixture of Unit 1 and 2 Non- Embrittled bolts which had been in service for 122000 hours. Remnant life assessments, concerning both embrittlement and creep damage aspects, were earned out on this series of easing bolts at service times 122000, 150000 and 200000 hours. These assessments involved the use of general embrittlement and creep damage laws which were empirically derived and concerned such parameters as microstructural grain size, bulk phosphorus content and accumulated service strain. (orig.) 7 refs.

Life cycle assessment of mobile phone housing.

Science.gov (United States)

Yang, Jian-xin; Wang, Ru-song; Fu, Hao; Liu, Jing-ru

2004-01-01

The life cycle assessment of the mobile phone housing in Motorola(China) Electronics Ltd. was carried out, in which materials flows and environmental emissions based on a basic production scheme were analyzed and assessed. In the manufacturing stage, such primary processes as polycarbonate molding and surface painting are included, whereas different surface finishing technologies like normal painting, electroplate, IMD and VDM etc. were assessed. The results showed that housing decoration plays a significant role within the housing life cycle. The most significant environmental impact from housing production is the photochemical ozone formation potential. Environmental impacts of different decoration techniques varied widely, for example, the electroplating technique is more environmentally friendly than VDM. VDM consumes much more energy and raw material. In addition, the results of two alternative scenarios of dematerialization showed that material flow analysis and assessment is very important and valuable in selecting an environmentally friendly process.

Life Cycle Impact Assessment Research Developments and Needs

Science.gov (United States)

Life Cycle Impact Assessment (LCIA) developments are explained along with key publications which record discussions which comprised ISO 14042 and SETAC document development, UNEP SETAC Life Cycle Initiative research, and research from public and private research institutions. It ...

Social Life Cycle Assessment Revisited

Directory of Open Access Journals (Sweden)

Ruqun Wu

2014-07-01

Full Text Available To promote the development of Social Life Cycle Assessment (SLCA, we conducted a comprehensive review of recently developed frameworks, methods, and characterization models for impact assessment for future method developers and SLCA practitioners. Two previous reviews served as our foundations for this review. We updated the review by including a comprehensive list of recently-developed SLCA frameworks, methods and characterization models. While a brief discussion from goal, data, and indicator perspectives is provided in Sections 2 to 4 for different frameworks/methods, the focus of this review is Section 5 where discussion on characterization models for impact assessment of different methods is provided. The characterization models are categorized into two types following the UNEP/SETAC guidelines: type I models without impact pathways and type II models with impact pathways. Different from methods incorporating type I/II characterization models, another LCA modeling approach, Life Cycle Attribute Assessment (LCAA, is also discussed in this review. We concluded that methods incorporating either type I or type II models have limitations. For type I models, the challenge lies in the systematic identification of relevant stakeholders and materiality issues; while for type II models, identification of impact pathways that most closely and accurately represent the real-world causal relationships is the key. LCAA may avoid these problems, but the ultimate questions differ from those asked by the methods using type I and II models.

Life cycle assessment of the transmission network in Great Britain

International Nuclear Information System (INIS)

Harrison, Gareth P.; Maclean, Edward J.; Karamanlis, Serafeim; Ochoa, Luis F.

2010-01-01

Analysis of lower carbon power systems has tended to focus on the operational carbon dioxide (CO 2 ) emissions from power stations. However, to achieve the large cuts required it is necessary to understand the whole-life contribution of all sectors of the electricity industry. Here, a preliminary assessment of the life cycle carbon emissions of the transmission network in Great Britain is presented. Using a 40-year period and assuming a static generation mix it shows that the carbon equivalent emissions (or global warming potential) of the transmission network are around 11 gCO 2-eq /kWh of electricity transmitted and that almost 19 times more energy is transmitted by the network than is used in its construction and operation. Operational emissions account for 96% of this with transmission losses alone totalling 85% and sulphur hexafluoride (SF 6 ) emissions featuring significantly. However, the CO 2 embodied within the raw materials of the network infrastructure itself represents a modest 3%. Transmission investment decisions informed by whole-life cycle carbon assessments of network design could balance higher financial and carbon 'capital' costs of larger conductors with lower transmission losses and CO 2 emissions over the network lifetime. This will, however, necessitate new regulatory approaches to properly incentivise transmission companies.

Life quality time allocation index-an equilibrium economy consistent version of the current life quality index

DEFF Research Database (Denmark)

Ditlevsen, Ove; Friis-Hansen, Peter

2005-01-01

The definition the Life Quality Index for a country as originally suggested by Nathwani, Lind and Pandey is based on the gross domestic product (GDP), the expected life in good health at birth, and the fraction of life time the anonymous citizen of the country is occupied with money making work...... a further development casting the definition into dimensionless quantities that make the index get a pure unit of time and not the somewhat obscure unit as a power product of a money unit and a time unit. To avoid confusion, this new variant of the LQI is called the Life Quality Time Allocation Index (LQTAI...... of the variables themselves, the relative increment of the LQI becomes defined as a convex combination of the two relative increments. The combination parameter is obtained by an optimality argument about the anonymous citizen’s distribution of his or her time between free time and work time. In the original...

Life cycle integrated thermoeconomic assessment method for energy conversion systems

International Nuclear Information System (INIS)

Kanbur, Baris Burak; Xiang, Liming; Dubey, Swapnil; Choo, Fook Hoong; Duan, Fei

2017-01-01

Highlights: • A new LCA integrated thermoeconomic approach is presented. • The new unit fuel cost is found 4.8 times higher than the classic method. • The new defined parameter increased the sustainability index by 67.1%. • The case studies are performed for countries with different CO 2 prices. - Abstract: Life cycle assessment (LCA) based thermoeconomic modelling has been applied for the evaluation of energy conversion systems since it provided more comprehensive and applicable assessment criteria. This study proposes an improved thermoeconomic method, named as life cycle integrated thermoeconomic assessment (LCiTA), which combines the LCA based enviroeconomic parameters in the production steps of the system components and fuel with the conventional thermoeconomic method for the energy conversion systems. A micro-cogeneration system is investigated and analyzed with the LCiTA method, the comparative studies show that the unit cost of fuel by using the LCiTA method is 3.8 times higher than the conventional thermoeconomic model. It is also realized that the enviroeconomic parameters during the operation of the system components do not have significant impacts on the system streams since the exergetic parameters are dominant in the thermoeconomic calculations. Moreover, the improved sustainability index is found roundly 67.2% higher than the previously defined sustainability index, suggesting that the enviroeconomic and thermoeconomic parameters decrease the impact of the exergy destruction in the sustainability index definition. To find the feasible operation conditions for the micro-cogeneration system, different assessment strategies are presented. Furthermore, a case study for Singapore is conducted to see the impact of the forecasted carbon dioxide prices on the thermoeconomic performance of the micro-cogeneration system.

Life-cycle assessment of Nebraska bridges.

Science.gov (United States)

2013-05-01

Life-cycle cost analysis (LCCA) is a necessary component in bridge management systems (BMSs) for : assessing investment decisions and identifying the most cost-effective improvement alternatives. The : LCCA helps to identify the lowest cost alternati...

Condition Assessment and End-of-Life Prediction System for Electric Machines and Their Loads

Science.gov (United States)

Parlos, Alexander G.; Toliyat, Hamid A.

2005-01-01

An end-of-life prediction system developed for electric machines and their loads could be used in integrated vehicle health monitoring at NASA and in other government agencies. This system will provide on-line, real-time condition assessment and end-of-life prediction of electric machines (e.g., motors, generators) and/or their loads of mechanically coupled machinery (e.g., pumps, fans, compressors, turbines, conveyor belts, magnetic levitation trains, and others). In long-duration space flight, the ability to predict the lifetime of machinery could spell the difference between mission success or failure. Therefore, the system described here may be of inestimable value to the U.S. space program. The system will provide continuous monitoring for on-line condition assessment and end-of-life prediction as opposed to the current off-line diagnoses.

[Development of "assessment guideline of family power for healthy life"].

Science.gov (United States)

Fukushima, M; Shimanouchi, S; Kamei, T; Takagai, E; Hoshino, Y; Sugiyama, I

1997-12-01

The purpose of this study is to develop "assessment guideline of family power for healthy life" aiming at expanding self-care power of family in community nursing practice. The subjects of this study covered those families in one hundred and fifty six instances that we had seized as subject for nursing care and study. The method of this study had constructed assessment guideline inductively out of each case, and modified it by applying to cases of families with health problems and others. As a result, we had formed nine items of "family power for healthy life" and three items of "conditions influencing family power for healthy life" for "assessment guideline of family power for healthy life".

Life cycle assessment of a wind farm and related externalities

DEFF Research Database (Denmark)

Schleisner, Liselotte

2000-01-01

This paper concentrates on the assessment of energy and emissions related to the production and manufacture of materials for an offshore wind farm as well as a wind farm on land based on a life cycle analysis (LCA) model. In Denmark a model has been developed for life cycle assessments of different...... materials. The model is able to assess the energy use related to the production, transportation and manufacture of 1 kg of material. The energy use is divided into fuels used in order to estimate the emissions through the life cycle. In the paper the model and the attached assumptions are described......, and the model is demonstrated for two wind farms. The externalities for the wind farms are reported, showing the importance of life cycle assessment for renewable energy technologies. (C) 2000 Elsevier Science Ltd. All rights reserved....

Techno-Economics & Life Cycle Assessment (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Dutta, A.; Davis, R.

2011-12-01

This presentation provides an overview of the techno-economic analysis (TEA) and life cycle assessment (LCA) capabilities at the National Renewable Energy Laboratory (NREL) and describes the value of working with NREL on TEA and LCA.

Implementing Life Cycle Assessment in systems development

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh; Hauschild, Michael Zwicky; McAloone, Timothy Charles

2003-01-01

and the rapid changes in markets for many products. The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems...... for the designer in evaluating the environmental benignity of the product from the outset and to provide the designer with a framework for decision support based on the performance evaluation at different stages of the design process. The overall aim of this paper is to produce an in-depth understanding...... of possibilities which can be introduced in the design stage compared to the other life cycle stages of the product system. The paper collects experiences and ideas around the state-of-the-art in eco-design, from literature and personal experience and further provides eco-design life cycle assessment strategies...

Quality of life of patients who underwent aesthetic rhinoplasty: 100 cases assessed with the Glascow Benefit Inventory.

Science.gov (United States)

Kotzampasakis, Dimitrios; Piniara, Anastasia; Themelis, Sotirios; Kotzampasakis, Stylianos; Gabriel, Eustratios; Maroudias, Nikos; Nikolopoulos, Thomas

2017-09-01

The aim of the present study is to assess the long-term effect of classic rhinoplasty on patients' quality of life. Outcomes research. The study included 100 operated patients; there were 34 males and 66 females. The ages ranged between 23 and 57 years old, with a mean of 36.4 years. A minimum of 3 years between the operation and the study was selected to assess the long-term effect of the operation on the patients' quality of life and exclude any short-term impressions. The time elapsed between surgery and the time of the study ranged from 3 to 13 years, with a mean of 6.8 years. Patients were assessed using the Glasgow Benefit Inventory, which has been proven valid and reliable in ear, nose, and throat interventions. From the 100 patients included in the study, 92 reported improvement in their quality of life due to the operation and only eight worsening. In the social support subscale, 97 patients reported better quality of life, and only three patients reported worse quality of life. The patients' overall life markedly improved, reaching a mean of 80% in the Glasgow Benefit Inventory. The present long-term study using a validated and reliable instrument concludes that rhinoplasty improves the quality of life of patients in all sectors. 2c Laryngoscope, 127:2017-2025, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

Waste-to-energy: A review of life cycle assessment and its extension methods.

Science.gov (United States)

Zhou, Zhaozhi; Tang, Yuanjun; Chi, Yong; Ni, Mingjiang; Buekens, Alfons

2018-01-01

This article proposes a comprehensive review of evaluation tools based on life cycle thinking, as applied to waste-to-energy. Habitually, life cycle assessment is adopted to assess environmental burdens associated with waste-to-energy initiatives. Based on this framework, several extension methods have been developed to focus on specific aspects: Exergetic life cycle assessment for reducing resource depletion, life cycle costing for evaluating its economic burden, and social life cycle assessment for recording its social impacts. Additionally, the environment-energy-economy model integrates both life cycle assessment and life cycle costing methods and judges simultaneously these three features for sustainable waste-to-energy conversion. Life cycle assessment is sufficiently developed on waste-to-energy with concrete data inventory and sensitivity analysis, although the data and model uncertainty are unavoidable. Compared with life cycle assessment, only a few evaluations are conducted to waste-to-energy techniques by using extension methods and its methodology and application need to be further developed. Finally, this article succinctly summarises some recommendations for further research.

Conceptual Framework To Extend Life Cycle Assessment ...

Science.gov (United States)

Life Cycle Assessment (LCA) is a decision-making tool that accounts for multiple impacts across the life cycle of a product or service. This paper presents a conceptual framework to integrate human health impact assessment with risk screening approaches to extend LCA to include near-field chemical sources (e.g., those originating from consumer products and building materials) that have traditionally been excluded from LCA. A new generation of rapid human exposure modeling and high-throughput toxicity testing is transforming chemical risk prioritization and provides an opportunity for integration of screening-level risk assessment (RA) with LCA. The combined LCA and RA approach considers environmental impacts of products alongside risks to human health, which is consistent with regulatory frameworks addressing RA within a sustainability mindset. A case study is presented to juxtapose LCA and risk screening approaches for a chemical used in a consumer product. The case study demonstrates how these new risk screening tools can be used to inform toxicity impact estimates in LCA and highlights needs for future research. The framework provides a basis for developing tools and methods to support decision making on the use of chemicals in products. This paper presents a conceptual framework for including near-field exposures into Life Cycle Assessment using advanced human exposure modeling and high-throughput tools

Perceptions of Life Changes: An Alternate Measure of Aging through Time.

Science.gov (United States)

Suggs, Patricia K.; Kivett, Vira R.

Retrospective strategies measuring perceived life changes over time can further the advancement of life span developmental research. Researchers have neglected the individual's perception of his/her life changes over time. This study attempts to determine discriminators of change over time as operationalized by perceptions of change. Subjects…

Assessing life stressors and social resources: applications to alcoholic patients.

Science.gov (United States)

Moos, R H; Fenn, C B; Billings, A G; Moos, B S

A growing body of evidence points to the importance of life stressors and social resources in the development and course of alcoholism and other substance abuse disorders. This article describes the Life Stressors and Social Resources Inventory (LISRES), which provides an integrated assessment of life stressors and social resources in eight domains: physical health, home/neighborhood, financial, work, spouse/partner, children, extended family, and friends. The indices were developed on data obtained at two points in time 18 months apart from four demographically comparable groups: alcoholic patients, depressed patients, arthritic patients, and non-problem-drinking adults. As expected, alcoholic patients reported more acute and chronic stressors and fewer social resources than did non-problem-drinking adults. More important, the indices were predictively related to changes in alcohol consumption, drinking problems, depression, and self-confidence. Procedures such as the LISRES have some potential clinical and research applications and may be helpful in examining the process of recovery and relapse in substance abuse disorders.

Remaining life assessment and plant life extension in high temperature components of power and petrochemical plant

International Nuclear Information System (INIS)

Fleming, A.

2003-01-01

This paper explains the reasons why plant life can so easily be extended beyond the original design life. It details the means by which plant life extension is normally achieved, a structured plan for achieving such plant life extension at reasonable cost and some of the key techniques used in assessing the remaining life and discusses the simple repair options available. (author)

Estimating pesticide emissions for life cycle assessment of agricultural products

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Røpke, Inge

2004-01-01

As the first country in Europe Denmark almost 2 years ago established an official center for Life Cycle Assessments and life cycle approaches as an element of the national IPP (Integrated Product Policy). The Danish EPA lends financial support to this important initiative, the aim of which is to: 1....... promote the use of Life Cycle Assessment and other product-oriented environmental tools in companies, 2. support companies and other in using environmental assessment of products and services, 3. ensure that the effort in the LCA area is based on a solid and scientific basis, and 4. maintain the well...... evaluation finished in September 2004. Important learnings for all who are engaged in dissemination of life cycle thinking in industry will be presented....

Implementing Life Cycle Assessment in Product development

DEFF Research Database (Denmark)

Bhander, Gurbakhash Singh

2003-01-01

The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating the envir......The overall aim of the paper is to provide an understanding of the environmental issues involved in the early stages of product development and the capacity of life cycle assessment techniques to address these issues. The paper aims to outline the problems for the designer in evaluating......, and of the opportunities for introducing environmental criteria in the design process through meeting the information requirements of the designer on the different life cycle stages, producing an in-depth understanding of the attitudes of practitioners among product developers to the subject area, and an understanding...... of possible future directions for product development. An Environmentally Conscious Design method is introduced and trade-offs are presented between design degrees of freedom and environmental solutions. Life cycle design frameworks and strategies are addressed. The paper collects experiences and ideas around...

e-Learning in Advanced Life Support-What factors influence assessment outcome?

Science.gov (United States)

Thorne, C J; Lockey, A S; Kimani, P K; Bullock, I; Hampshire, S; Begum-Ali, S; Perkins, G D

2017-05-01

To establish variables which are associated with favourable Advanced Life Support (ALS) course assessment outcomes, maximising learning effect. Between 1 January 2013 and 30 June 2014, 8218 individuals participated in a Resuscitation Council (UK) e-learning Advanced Life Support (e-ALS) course. Participants completed 5-8h of online e-learning prior to attending a one day face-to-face course. e-Learning access data were collected through the Learning Management System (LMS). All participants were assessed by a multiple choice questionnaire (MCQ) before and after the face-to-face aspect alongside a practical cardiac arrest simulation (CAS-Test). Participant demographics and assessment outcomes were analysed. The mean post e-learning MCQ score was 83.7 (SD 7.3) and the mean post-course MCQ score was 87.7 (SD 7.9). The first attempt CAS-Test pass rate was 84.6% and overall pass rate 96.6%. Participants with previous ALS experience, ILS experience, or who were a core member of the resuscitation team performed better in the post-course MCQ, CAS-Test and overall assessment. Median time spent on the e-learning was 5.2h (IQR 3.7-7.1). There was a large range in the degree of access to e-learning content. Increased time spent accessing e-learning had no effect on the overall result (OR 0.98, P=0.367) on simulated learning outcome. Clinical experience through membership of cardiac arrest teams and previous ILS or ALS training were independent predictors of performance on the ALS course whilst time spent accessing e-learning materials did not affect course outcomes. This supports the blended approach to e-ALS which allows participants to tailor their e-learning experience to their specific needs. Copyright © 2017 Elsevier B.V. All rights reserved.

Inservice inspection of heavy water plants - a tool in assessing damage to components and life extension

International Nuclear Information System (INIS)

Subramanian, C.V.; Thavasimuthu, M.; Bhattacharys, D.K.; Baldev Raj

1994-01-01

Any system and its components are expected to give trouble free service over a certain period of time known as life time. The life time is estimated during the design stage. To achieve the design life, certain level of quality are to be defined and this quality has to be worked into the components by proper fabrication processes and their compliance with quality are to be checked. In addition, one has to guard against initiation or propagation of defects which may occur due to normal and abnormal service conditions. Non-destructive test (NDT) techniques are widely used for finding the health of the component. The role of NDT extends from the production stage to the entire life period of the system. This paper highlights the periodic in-service inspection (ISI) carried out on various components of the Heavy Water Plants (HWP) in India in assessing the integrity of the components and predicting the life of the components. (author). 3 refs., 4 figs

Towards a life cycle sustainability assessment: making informed choices on products

Energy Technology Data Exchange (ETDEWEB)

Ciroth, Andreas [GreenDeltaTC, Berlin (Germany); Finkbeiner, Matthias; Traverso, Marzia [TU Berlin (Germany); Hildenbrand, Jutta [Chalmers University (United States); Kloepffer, Walter [Editor-in-Chief of the International Journal of Life Cycle Assessment (Germany); Mazijn, Bernard [Ghent University (Belgium); Prakash, Siddharth [Oeko-Institut (Germany); Sonnemann, Guido; Valdivia, Sonia [UNEP (France); Ugaya, Cassia Maria Lie [Technological Federal University of Parana, ACV (Brazil); Vickery-Niederman, Gina [University of Arkansas (United States)

2011-07-01

In this introduction to the concept of life cycle sustainability assessment (LCSA), we acknowledge the foundations laid by previous works and initiatives. One such initiative has been the ISO 14040 series (Environmental management -- Life cycle assessment -- Principles and framework), which in addition to the ISO 26000: Social Responsibility Guidance Standard, and the contribution of a number of international initiatives (Appendix A) have been essential for the development of this publication. The life cycle of a product involves flows of material, energy and money. Nonetheless, the picture is not complete unless we look also at the production and consumption impacts on all actors along the 'value chain' -- workers, local communities, consumers and society itself. Different life cycle assessment techniques allow individuals and enterprises to assess the impact of their purchasing decisions and production methods along different aspects of this value chain. An (Environmental) life cycle assessment (LCA) looks at potential impacts to the environment as a result of the extraction of resources, transportation, production, use, recycling and discarding of products; life cycle costing (LCC) is used to assess the cost implications of this life cycle; and social life cycle assessment (S-LCA) examines the social consequences. However, in order to get the 'whole picture', it is vital to extend current life cycle thinking to encompass all three pillars of sustainability: (i) environmental, (ii) economic and (iii) social. This means carrying out an assessment based on environmental, economic and social issues -- by conducting an overarching life cycle sustainability assessment (LCSA). This publication shows how all three techniques -- which all share similar methodological frameworks and aims -- can be combined to make the move towards an overarching LCSA possible. Because it is holistic, systemic and rigorous, (environmental) LCA is the preferred technique

Towards a life cycle sustainability assessment: making informed choices on products

Energy Technology Data Exchange (ETDEWEB)

Ciroth, Andreas [GreenDeltaTC, Berlin (Germany); Finkbeiner, Matthias; Traverso, Marzia [TU Berlin (Germany); Hildenbrand, Jutta [Chalmers University (United States); Kloepffer, Walter [Editor-in-Chief of the International Journal of Life Cycle Assessment (Germany); Mazijn, Bernard [Ghent University (Belgium); Prakash, Siddharth [Oeko-Institut (Germany); Sonnemann, Guido; Valdivia, Sonia [UNEP (France); Ugaya, Cassia Maria Lie [Technological Federal University of Parana, ACV (Brazil); Vickery-Niederman, Gina [University of Arkansas (United States)

2011-07-01

In this introduction to the concept of life cycle sustainability assessment (LCSA), we acknowledge the foundations laid by previous works and initiatives. One such initiative has been the ISO 14040 series (Environmental management -- Life cycle assessment -- Principles and framework), which in addition to the ISO 26000: Social Responsibility Guidance Standard, and the contribution of a number of international initiatives (Appendix A) have been essential for the development of this publication. The life cycle of a product involves flows of material, energy and money. Nonetheless, the picture is not complete unless we look also at the production and consumption impacts on all actors along the 'value chain' -- workers, local communities, consumers and society itself. Different life cycle assessment techniques allow individuals and enterprises to assess the impact of their purchasing decisions and production methods along different aspects of this value chain. An (Environmental) life cycle assessment (LCA) looks at potential impacts to the environment as a result of the extraction of resources, transportation, production, use, recycling and discarding of products; life cycle costing (LCC) is used to assess the cost implications of this life cycle; and social life cycle assessment (S-LCA) examines the social consequences. However, in order to get the 'whole picture', it is vital to extend current life cycle thinking to encompass all three pillars of sustainability: (i) environmental, (ii) economic and (iii) social. This means carrying out an assessment based on environmental, economic and social issues -- by conducting an overarching life cycle sustainability assessment (LCSA). This publication shows how all three techniques -- which all share similar methodological frameworks and aims -- can be combined to make the move towards an overarching LCSA possible. Because it is holistic, systemic and rigorous, (environmental) LCA is the preferred technique when it comes to

Working time, satisfaction and work life balance: A European perspective

OpenAIRE

Humpert, Stephan

2014-01-01

This paper analyses gender-specific differences in working time mismatches by using three different measures for representing satisfaction and work life balance. Results show that, while male satisfaction with life or work is in general not affected by working for more or less hours, over-time is found to significantly lower male work life balance. Women are more sensitive to the amount of working hours as they prefer part-time employment and they are dissatisfied with changes ...

Comparative environmental life cycle assessment of composite materials

International Nuclear Information System (INIS)

De Vegt, O.M.; Haije, W.G.

1997-12-01

The aim of the present study is to compare and quantify the environmental impact of three rotorblades made of different materials and to establish which stage in the life cycle contributes most. The life cycle of a product can be represented by the production phase, including depletion of raw materials (mining) and production (machining) of products, the utilisation phase, including use of energy, maintenance and cleaning, and the disposal phase, including landfill, incineration, recycling, etc. The environmental impact of a product is not only determined by the materials selected but also by the function of the product itself. E.g. when natural fibres are applied in vehicles as a substitution for metals the environmental impact in the use phase will be reduced due to a lower energy consumption caused by a lower car weight. The influence on the environmental impact of the production phase must also be taken into account. The material relation between the production phase and the use phase and the disposal phase is complicated. In general the lifetime of a product use phase can be extended (positive aspect), e.g. by application of a coating onto the surface. Due to the coating the product can not easily be recycled, which is a negative aspect. The three types of composites used in the rotorblade of the wind energy converter considered in this study are: flaxfibre reinforced epoxy, carbon fibre reinforced epoxy and glassfibre reinforced polyester. The assessment is performed using the computer program Simapro 3, which is based on the Dutch CML method for the environmental life-cycle assessment of products using the Eco-Indicator 95 evaluation method. The CML method defines five phases for an LCA: goal definition and scoping; inventory; classification; impact assessment; and improvement analysis. The improvement analysis is not part of this work. Performing an LCA is a time-consuming process due to the detailed information that is required. In chapter five some

Life cycle reliability assessment of new products—A Bayesian model updating approach

International Nuclear Information System (INIS)

Peng, Weiwen; Huang, Hong-Zhong; Li, Yanfeng; Zuo, Ming J.; Xie, Min

2013-01-01

The rapidly increasing pace and continuously evolving reliability requirements of new products have made life cycle reliability assessment of new products an imperative yet difficult work. While much work has been done to separately estimate reliability of new products in specific stages, a gap exists in carrying out life cycle reliability assessment throughout all life cycle stages. We present a Bayesian model updating approach (BMUA) for life cycle reliability assessment of new products. Novel features of this approach are the development of Bayesian information toolkits by separately including “reliability improvement factor” and “information fusion factor”, which allow the integration of subjective information in a specific life cycle stage and the transition of integrated information between adjacent life cycle stages. They lead to the unique characteristics of the BMUA in which information generated throughout life cycle stages are integrated coherently. To illustrate the approach, an application to the life cycle reliability assessment of a newly developed Gantry Machining Center is shown

Environmental impacts of lighting technologies - Life cycle assessment and sensitivity analysis

International Nuclear Information System (INIS)

Welz, Tobias; Hischier, Roland; Hilty, Lorenz M.

2011-01-01

With two regulations, 244/2009 and 245/2009, the European Commission recently put into practice the EuP Directive in the area of lighting devices, aiming to improve energy efficiency in the domestic lighting sector. This article presents a comprehensive life cycle assessment comparison of four different lighting technologies: the tungsten lamp, the halogen lamp, the conventional fluorescent lamp and the compact fluorescent lamp. Taking advantage of the most up-to-date life cycle inventory database available (ecoinvent data version 2.01), all life cycle phases were assessed and the sensitivity of the results for varying assumptions analysed: different qualities of compact fluorescent lamps (production phase), different electricity mixes (use phase), and end-of-life scenarios for WEEE recycling versus municipal solid waste incineration (disposal phase). A functional unit of 'one hour of lighting' was defined and the environmental burdens for the whole life cycle for all four lamp types were calculated, showing a clearly lower impact for the two gas-discharge lamps, i.e. the fluorescent and the compact fluorescent lamp. Differences in the product quality of the compact fluorescent lamps reveal to have only a very small effect on the overall environmental performance of this lamp type; a decline of the actual life time of this lamp type doesn't result in a change of the rank order of the results of the here examined four lamp types. It was also shown that the environmental break-even point of the gas-discharge lamps is reached long before the end of their expected life-span. All in all, it can be concluded that a change from today's tungsten lamp technology to a low-energy-consuming technology such as the compact fluorescent lamp results in a substantial environmental benefit.

Time course for memory dysfunction in early-life and late-life major depression: a longitudinal study from the Juntendo University Mood Disorder Project.

Science.gov (United States)

Maeshima, Hitoshi; Baba, Hajime; Nakano, Yoshiyuki; Satomura, Emi; Namekawa, Yuki; Takebayashi, Naoko; Nomoto, Hiroshi; Suzuki, Toshihito; Mimura, Masaru; Arai, Heii

2013-10-01

Previous studies have demonstrated that patients with depression also have memory dysfunctions during depressive episodes. These dysfunctions partially remain immediately after remission from a depressive state; however, it is unclear whether these residual memory dysfunctions may disappear through long-term remission from depression. The present study compared patients during early-life (agelife (age ≥ 60) depression while in their remitted stage with healthy controls to elucidate the impact of a long-term course on memory. Logical memory from the Wechsler Memory Scale-Revised was administered to 67 patients with major depressive disorder (MDD) (47 patients with early-life depression and residual 20 patients with late-life depression) and 50 healthy controls. MDD patients received memory assessments at the time of their initial remission and at a follow-up three years after remission. At the time of initial remission, scores for logical memory were significantly lower in both patient groups compared to matched controls. At follow-up, memory dysfunction for early-life MDD patients disappeared, whereas scores in the late-life MDD group remained significantly lower than those of matched controls. All patients in the present study were on antidepressant medications. Our findings suggested that the progress of memory performance in late-life MDD patients may be different from early-life MDD patients. © 2013 Elsevier B.V. All rights reserved.

Maintenance and life assessment of steam generators at Embalse Nuclear Station

International Nuclear Information System (INIS)

Luna, P.; Diaz, G.; Sveruga, H.; Sainz, R.

2006-01-01

hot leg side of the carbon steel Tube Support Plates is the main ageing issue at the point that SGs life extension could be compromised. During the LA-frame secondary side inspections of oct-nov 2005, many internals of SGs 2 and 4 were inspected for the first time and some important and minor degradation issues that are being to be assessed were found: possible crevice corrosion at the thermal plate-tube gap; incipient FAC at the steam separators and loose part/foreign object detection. The results of the 2005 inspections and the conclusions of the TSP-related studies which include structural studies for accidents (Seismic and Steam Line Brake) and feed water chemical improvement to reduce FAC rate, will allow to complete the Life Assessment and the recommendations needed for refurbishment and life extension (repair/replacement of subcomponents, specific inspections, modifications of the In Service Inspection and Maintenance programs, etc) The ENGS SGs shows a low percentage of exchange-surface area loss due to tube plugging, but they must be monitored continually and systematically if a life extension is intended. However, replacement-retubing options during the refurbishment outage should be being taken into consideration until the complete SG life prognosis is finished. (author)

Model of environmental life cycle assessment for coal mining operations.

Science.gov (United States)

Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

2016-08-15

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

Enquiring into the roots of bioenergy - epistemic uncertainties in life cycle assessments

DEFF Research Database (Denmark)

Saez de Bikuna Salinas, Koldo

global warming impacts than the respective fossil fuels they replace unless planted on abandoned lands. With Papers I-II, the selection of the land-use references and time horizons involved in LCA of biofuels was demonstrated to be crucial for the characterization of the resulting environmental impacts......The research for this Thesis was originally framed around the “sustainability assessment of full chain bioenergy”. However, it is known for some years that the critical impacts of dedicated bioenergy relate to induced land use changes (LUC). Their criticality derives from their potential...... to dominate environmental impacts from a life-cycle perspective and from the uncertainty that accompanies them. On the other hand, continued land use may be a concern for soil’s long-term sustainability (understood as fertility), which has recently received attention in environmental life-cycle assessments...

A comparative life cycle assessment of marine power systems

International Nuclear Information System (INIS)

Ling-Chin, Janie; Roskilly, Anthony P.

2016-01-01

(17.7–161.9%). Larger magnitude of increase was shown by the new-build system in ecotoxicity (90–93.9%) and fossil fuel depletion (391.3%) as a result of handling additional scrap. Relative contribution of significant components towards environmental impact remained profound for the retrofit system (i.e. more than 84% for all impact categories) and became more prominent for the new-build system (approximately 99% for 18 impacts). For retrofit and new-build systems respectively, changes in fuel consumption quantity by ±10% and ±20% varied (i) ecotoxicity and land use by no means, (ii) fossil fuel depletion by 0.95–1.50 and 4.81–5.01 times assessed by CML2001 (or 0.95–1.50 and 5.12–5.32 times assessed by Eco-Indicator99); and (iii) the remaining impact categories by 0.65–1.37 and 0.34–0.92 times. The new-build system showed the greatest mitigation potential in 18 impact categories. The retrofit system was more environmentally friendly than the reference system. Appropriate life cycle management was warrant to avoid burden shifting whilst alleviating the environmental burdens at the same time.

Assessment of quality of life of parents of children with osteogenesis imperfecta.

Science.gov (United States)

Szczepaniak-Kubat, Anna; Kurnatowska, Olga; Jakubowska-Pietkiewicz, Elzbieta; Chlebna-Sokół, Danuta

2012-01-01

The aim of the work was an objective assessment of the quality of life of parents of children with osteogenesis imperfecta (OI) and of its determinant factors. The survey answers of 25 parents were analyzed and contained demographic parameters, socioeconomic status information, quality of life of responses and type of support they have been receiving. In order to assess the effects of this children's disease on the quality of life of the parents, families were divided into two groups depending on the OI severity: group M--mild (type I and IV OI), group S--severe (type III OI). The objective of the work was carried out based on the WHOQOL-BREF quality of life questionnaire and measures of family status: education degree based on the International Standard Classification of Education (ISCED), a subjective assessment of the family's wealth (Perceived Family Wealth, PFW), and the family's financial resources (Family Affluence Scale, FAS). 56% of respondents assessed their global quality of life (Quality of Life, QL) as good, whereas 8% answered poor. Perception of general health status was similar. Life domains assessed in the WHOQOL-BREF questionnaire received the following mean values on a scale from 4 to 20 points: physical--12.2 +/- 1.2, psychological--15.04 +/- 2.2, environmental--13.32 +/- 2, social relationships--14.28 +/- 1.5. In the severe OI group, the environmental domain was assessed as worse than in the mild OI group and this assessment was statistically significant, despite the fact that the group of families with severe cases of OI received more support from the appropriate institutions. Indicators of socioeconomic status did not affect the respondents' assessment of their global quality of life. In the tested group of families, the child's disease did not affect either the global quality of life assessment or health of the respondents or their quality of life in terms of physical and mental status and social relationships. The parents of children with

Life assessment of gas turbine blades after long term service

Energy Technology Data Exchange (ETDEWEB)

Auerkari, Pertti; Salonen, Jorma [VTT, Espoo (Finland); Maekinen, Sari [Helsingin Energia, Helsinki (Finland); Karvonen, Ikka; Tanttari, Heikki [Lappeenrannan Laempoevoima, Lappeenranta (Finland); Kangas, Pekka [Neste Oil, Kilpilahti (Finland); Scholz, Alfred [Technische Univ. Darmstadt (Germany); Vacchieri, Erica [Ansaldo Richerche, Genoa (Italy)

2010-07-01

Turbine blade samples from three land based gas turbines have been subjected to systematic condition and life assessment after long term service (88000 - 109000 equivalent operating hours, eoh), when approaching the nominal or suggested life limits. The blades represent different machine types, materials and design generations, and uncooled blading outside the hottest front end of the turbine, i.e. blades with relatively large size and considerable expected life. For a reasonable assessment, a range of damage mechanisms need to be addressed and evaluated for the impact in the residual life. The results suggested significant additional safe life for all three blade sets. In some cases this could warrant yet another life cycle comparable to that of new blades, even after approaching the nominal end of life in terms of recommended equivalent operating hours. This is thought to be partly because of base load combined cycle operation and natural gas fuel, or modest operational loading if the design also accounted for more intensive cycling operation and more corrosive oil firing. In any case, long term life extension is only appropriate if not intervened by events of overloading, overheating or other sudden events such as foreign object damage (FOD), and if supported by the regular inspection and maintenance program to control in-service damage. Condition based assessment therefore remains an important part of the blade life management after the decision of accepted life extension. (orig.)

Exergetic life cycle assessment of hydrogen production from renewables

Science.gov (United States)

Granovskii, Mikhail; Dincer, Ibrahim; Rosen, Marc A.

Life cycle assessment is extended to exergetic life cycle assessment and used to evaluate the exergy efficiency, economic effectiveness and environmental impact of producing hydrogen using wind and solar energy in place of fossil fuels. The product hydrogen is considered a fuel for fuel cell vehicles and a substitute for gasoline. Fossil fuel technologies for producing hydrogen from natural gas and gasoline from crude oil are contrasted with options using renewable energy. Exergy efficiencies and greenhouse gas and air pollution emissions are evaluated for all process steps, including crude oil and natural gas pipeline transportation, crude oil distillation and natural gas reforming, wind and solar electricity generation, hydrogen production through water electrolysis, and gasoline and hydrogen distribution and utilization. The use of wind power to produce hydrogen via electrolysis, and its application in a fuel cell vehicle, exhibits the lowest fossil and mineral resource consumption rate. However, the economic attractiveness, as measured by a "capital investment effectiveness factor," of renewable technologies depends significantly on the ratio of costs for hydrogen and natural gas. At the present cost ratio of about 2 (per unit of lower heating value or exergy), capital investments are about five times lower to produce hydrogen via natural gas rather than wind energy. As a consequence, the cost of wind- and solar-based electricity and hydrogen is substantially higher than that of natural gas. The implementation of a hydrogen fuel cell instead of an internal combustion engine permits, theoretically, an increase in a vehicle's engine efficiency of about of two times. Depending on the ratio in engine efficiencies, the substitution of gasoline with "renewable" hydrogen leads to (a) greenhouse gas (GHG) emissions reductions of 12-23 times for hydrogen from wind and 5-8 times for hydrogen from solar energy, and (b) air pollution (AP) emissions reductions of 38

Meson life time in the anisotropic quark-gluon plasma

International Nuclear Information System (INIS)

Ali-Akbari, Mohammad; Allahbakhshi, Davood

2014-01-01

In the hot (an)isotropic plasma the meson life time τ is defined as a time scale after which the meson dissociates. According to the gauge/gravity duality, this time can be identified with the inverse of the imaginary part of the frequency of the quasinormal modes, ω_I, in the (an)isotropic black hole background. In the high temperature limit, we numerically show that at fixed temperature(entropy density) the life time of the mesons decreases(increases) as the anisotropy parameter raises. For general case, at fixed temperature we introduce a polynomial function for ω_I and observe that the meson life time decreases. Moreover, we realize that (s/T"3)"6, where s and T are entropy density and temperature of the plasma respectively, can be expressed as a function of anisotropy parameter over temperature. Interestingly, this function is a Padé approximant.

Radiation damage and life-time evaluation of RBMK graphite stack

Energy Technology Data Exchange (ETDEWEB)

Platonov, P A; Chugunov, O K; Manevsky, V N; Karpukhin, V I [Russian Research Centre Kurchatov Inst., Moscow (Russian Federation). Reactor Material Div.

1996-08-01

At the present time there are 11 NPP units with RBMK reactors in operation in Russia, with the oldest now in operation 22 years. Design life-time of the RBMK-1000 reactor is 30 years. This paper addresses the evaluation of RBMK graphite stack life-time. It is the practice in Russia to evaluate the reliability of the channel reactor graphite stack using at least three criteria: degradation of physical-mechanical properties of graphite, preservation of the graphite brick integrity, and degradation of the graphite stack as a structure. Stack life-time evaluation by different criteria indicates that the most realistic approach may be realized on the basis of the criteria of brick cracking and degradation of the graphite stack as a structure. The RBMK reactor graphite stack life-time depends on its temperature and for different units it may be different. (author). 2 refs, 10 figs.

Accounting for time-dependent effects in biofuel life cycle greenhouse gas emissions calculations.

Science.gov (United States)

Kendall, Alissa; Chang, Brenda; Sharpe, Benjamin

2009-09-15

This paper proposes a time correction factor (TCF) to properly account for the timing of land use change-derived greenhouse gas emissions in the biofuels life cycle. Land use change emissions occur at the outset of biofuel feedstock production, and are typically amortized over an assumed time horizon to assign the burdens of land use change to multiple generations of feedstock crops. Greenhouse gas intensity calculations amortize emissions by dividing them equally over a time horizon, overlooking the fact that the effect of a greenhouse gas increases with the time it remains in the atmosphere. The TCF is calculated based on the relative climate change effect of an emission occurring at the outset of biofuel feedstock cultivation versus one amortized over a time horizon. For time horizons between 10 and 50 years, the TCF varies between 1.7 and 1.8 for carbon dioxide emissions, indicating that the actual climate change effect of an emission is 70-80% higher than the effect of its amortized values. The TCF has broad relevance for correcting the treatment of emissions timing in other life cycle assessment applications, such as emissions from capital investments for production systems or manufacturing emissions for renewable energy technologies.

Comparative life cycle assessment and life cycle costing of lodging in the Himalaya

NARCIS (Netherlands)

Bhochhibhoya, Silu; Pizzol, Massimo; Achten, Wouter M.J.; Maskey, Ramesh Kumar; Zanetti, Michela; Cavalli, Raffaele

2017-01-01

Purpose: The main aim of the study is to assess the environmental and economic impacts of the lodging sector located in the Himalayan region of Nepal, from a life cycle perspective. The assessment should support decision making in technology and material selection for minimal environmental and

The value of the exergetic life cycle assessment besides the LCA

NARCIS (Netherlands)

Cornelissen, Rene; Hirs, Gerard

2002-01-01

In this paper the value of the exergetic life cycle assessment (ELCA) has been analysed. The ELCA uses the framework of the life cycle assessment (LCA) and can be seen as the exergy analysis of a complete life cycle. The value of the ELCA besides the LCA has been discussed. It is shown that the ELCA

Reevaluation of time spent indoors used for exposure dose assessment

International Nuclear Information System (INIS)

Hirose, Katsumi; Fujimoto, Kenzo

2016-01-01

A time spent indoors of sixteen hours per day (indoor occupancy factor: 0.67) has been used to assess the radiation dose of residents who spend daily life in the area contaminated due to the nuclear accident in Japan. However, much longer time is considered to be spent indoors for recent modern life. United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has been used an indoor occupancy factor of 0.8 since 1977 and a few reports suggested much higher indoor occupancy factors. Therefore it is important to reevaluate the indoor occupancy factor using current available survey data in Japan, such as 'NHK 2010 National Time Use Survey' and 'Survey on Time Use and Leisure Activities' of Statistics Bureau with certain assumption of time spent indoors in each daily activity. The total time spent indoors in a day is calculated to be 20.2 hours and its indoor occupancy factor is 0.84. Much lower indoor occupancy factors were derived from the survey data by Statistics Bureau for 10 to 14 and 15 to 19 years old groups and farmers who spend most of their time outdoors although present estimated indoor occupancy factor of 0.84 is still lower than those found in some of the relevant reports. A rounded indoor occupancy factor of 0.80 might be the appropriate conservative reference value to be used for the dose estimation of people who live in radioactively contaminated areas and for other relevant purposes of exposure assessment, taken into consideration the present results and values reported in United States Environmental Protection Agency (US EPA) and UNSCEAR. (author)

Impact of landfill liner time-temperature history on the service life of HDPE geomembranes.

Science.gov (United States)

Rowe, R Kerry; Islam, M Z

2009-10-01

The observed temperatures in different landfills are used to establish a number of idealized time-temperature histories for geomembrane liners in municipal solid waste (MSW) landfills. These are then used for estimating the service life of different HDPE geomembranes. The predicted antioxidant depletion times (Stage I) are between 7 and 750 years with the large variation depending on the specific HDPE geomembrane product, exposure conditions, and most importantly, the magnitude and duration of the peak liner temperature. The higher end of the range corresponds to data from geomembranes aged in simulated landfill liner tests and a maximum liner temperature of 37 degrees C. The lower end of the range corresponds to a testing condition where geomembranes were immersed in a synthetic leachate and a maximum liner temperature of 60 degrees C. The total service life of the geomembranes was estimated to be between 20 and 3300 years depending on the time-temperature history examined. The range illustrates the important role that time-temperature history could play in terms of geomembrane service life. The need for long-term monitoring of landfill liner temperature and for geomembrane ageing studies that will provide improved data for assessing the likely long-term performance of geomembranes in MSW landfills are highlighted.

Wealth in Middle and Later Life: Examining the Life Course Timing of Women's Health Limitations.

Science.gov (United States)

Wilkinson, Lindsay R; Ferraro, Kenneth F; Mustillo, Sarah A

2018-06-04

Guided by cumulative inequality theory, this study poses two main questions: (a) Does women's poor health compromise household financial assets? (b) If yes, is wealth sensitive to the timing of women's health limitations? In addressing these questions, we consider the effect of health limitations on wealth at older ages, as well as examine how health limitations influence wealth over particular segments of the life course, giving attention to both the onset and duration of health limitations. Using 36 years of data from the National Longitudinal Survey of Mature Women, piecewise growth curve and linear regression models were used to estimate the effects of life course timing and duration of health limitations on household wealth. The findings reveal that women who experienced health limitations accumulated substantially less wealth over time, especially if the health limitations were manifest during childhood or early adulthood. This study identifies how early-life health problems lead to less wealth in later life.

Life-course occupational social class and health in later life: the importance of frequency and timing of measures.

Science.gov (United States)

Stone, Juliet; Netuveli, Gopalakrishnan; Blane, David

2014-09-01

Research investigating associations between social class over the life-course and later health relies primarily on secondary analysis of existing data, limiting the number and timing of available measurements. This paper aims to examine the impact of these constraints on the measurement of life-course occupational social class and subsequent explanatory analyses predicting health in later life. Participants of the UK Boyd Orr Lifegrid Subsample ( n  = 294), aged an average of 68 years, provided retrospective information on their life-course occupational social class, coded at 6-month intervals. This was used to simulate two types of life-course data: (1) Theoretical: Life stage (four data-points at key life stages); (2) A-theoretical: Panel data (data-points at regular intervals of varying length). The percentage of life time in disadvantage and the predictive value for limiting longstanding illness (LLI) in later life using the full life-course and simulated data was compared. The presence of 'critical periods' of exposure and the role of trajectories of social class were also investigated. Compared with the full data, the life stage approach estimated a higher percentage of life time in disadvantage and emphasised 'transient' periods in disadvantage (e.g. labour market entry). With varying intervals using the a-theoretical approach, there was no clear pattern. Percentage of life time in manual class was a significant predictor of LLI only when using the four-point life stage approach. Occupational social class at labour market entry was a predictor of LLI in later life, suggesting a 'critical period'. Comparison of trajectories of social class further emphasised the importance of the sequence and timing of exposures to disadvantage in determining later health. We conclude that producing a valid summary of life-course occupational social class does not necessarily require a large number of data-points, particularly if guided by relevant theory, and that such

QUALITY OF LIFE ASSESSMENT IN CARDIAC TRANSPLANT RECIPIENTS

Directory of Open Access Journals (Sweden)

A. O. Shevchenko

2014-01-01

Full Text Available Background. Quality of life (QoL is an important criterion for the treatment effi cacy that provides an important data regarding patient’s personal estimation of social adaptation and ability to perform daily duties.Methods. The study was aimed to evaluate QoL in cardiac transplant recipients. We have enrolled 42 stage D heart failure patients aged 29–61 (mean 39,23 ± 12,31 y/o, 38 males and 4 females, survived cardiac transplant surgery between Jan 2008 and Jan 2013. QoL was evaluated using the SF-36 survey prior to the heart surgery and during the follow-up period up to the 5 years.Results. Pre-operative assessment revealed low QoL indices of physical activity as well as general health status. Follow-up showed dramatic improvement in all QoL measures during 1 year after the surgery which was consistent through the whole observation period. There was an increase in physical functioning index by 2,8 times (p < 0,01, physical status dependent role functioning by 14 times (р < 0,0001, emotional status dependent role functioning by 3 times (р = 0,02, social functioning by 4,8 times (p = 0,002, pain threshold by 3 times (p = 0,02, psychic health by 3,6 times (p = 0,001, life activity by 2,6 times(p = 0,003, and total health by 1,6 times (p = 0,03. Physical activity was restored in 90% of patients during the fi rst year.Conclusion. The study shows signifi cant improvement in all QoL variables after heart transplantation in stage D heart failure patients. Main indices of physical, psychical, and social activities rise at the fi rst year and remain high during the 5-year period. These data support heart transplantation as a radical and effective method of terminal heart failure treatment.

Development and Validation of the Life Sciences Assessment: A Measure of Preschool Children's Conceptions of Basic Life Sciences

Science.gov (United States)

Maherally, Uzma Nooreen

2014-01-01

The purpose of this study was to develop and validate a science assessment tool termed the Life Sciences Assessment (LSA) in order to assess preschool children's conceptions of basic life sciences. The hypothesis was that the four sub-constructs, each of which can be measured through a series of questions on the LSA, will make a significant…

Sensitivity analysis in life cycle assessment

NARCIS (Netherlands)

Groen, E.A.; Heijungs, R.; Bokkers, E.A.M.; Boer, de I.J.M.

2014-01-01

Life cycle assessments require many input parameters and many of these parameters are uncertain; therefore, a sensitivity analysis is an essential part of the final interpretation. The aim of this study is to compare seven sensitivity methods applied to three types of case stud-ies. Two

Teachers' assessments of children aged eight predict life satisfaction in adolescence.

Science.gov (United States)

Honkanen, Meri; Meri, Honkanen; Hurtig, Tuula; Tuula, Hurtig; Taanila, Anja; Anja, Taanila; Moilanen, Irma; Irma, Moilanen; Koponen, Hannu; Hannu, Koponen; Mäki, Pirjo; Pirjo, Mäki; Veijola, Juha; Juha, Veijola; Puustjärvi, Anita; Anita, Puustjärvi; Ebeling, Hanna; Hanna, Ebeling; Koivumaa-Honkanen, Heli; Heli, Koivumaa-Honkanen

2011-09-01

The objective was to investigate how teachers' assessments of children predict life satisfaction in adolescence. This is a prospective cohort study on the population-based Northern Finland Birth Cohort 1986 (n = 8,959). Information was gathered from parents, teachers and adolescents using questionnaires at the age of 7, 8 and 15. Response rates were 80-90%. Emotional and behavioural problems were assessed with Rutter Children's Behavioural Questionnaires for teachers (RB2) and parents (RA2) during the first grade at age 8. At adolescence, self-reported life satisfaction was measured with a question including five response alternatives. According to teachers' assessments, 13.9% of the children had high emotional or behavioural problems (RB2 ≥9). These assessments predicted life dissatisfaction in adolescence (OR(crude) = 1.77; 95% CI 1.43-2.20) in several models including also health behaviour and use of psychotropic medicine. However, introducing all the significant variables in the same model, RB2 lost its significance (OR = 1.28; 0.96-1.70), but good school achievement assessed by teachers was still a significant predictor. Life satisfaction in adolescence was associated with a variety of favourable concurrent factors. In conclusion teachers' assessments of children during the first school year predicted life satisfaction in adolescence. In mental health promotion, teachers' early assessments should be utilized for the benefit of children.

Life cycle assessment of onshore and offshore wind energy - from theory to application

DEFF Research Database (Denmark)

Bonou, Alexandra; Laurent, Alexis; Olsen, Stig Irving

2016-01-01

material requirements for capital infrastructure. In both markets the bigger turbines with more advanced direct drive generator technology is shown to perform better than the smaller geared ones. Capital infrastructure is the most impactful life cycle stage across impacts. It accounts for more than 79......This study aims to assess the environmental impacts related to the provision of 1 kWh to the grid from wind power in Europe and to suggest how life cycle assessment can inform technology development and system planning. Four representative power plants onshore (with 2.3 and 3.2 MW turbines......) and offshore (4.0 and 6.0 MW turbines) with 2015 state-of-the-art technology data provided by Siemens Wind Power were assessed. The energy payback time was found to be less than 1 year for all technologies. The emissions of greenhouse gases amounted to less than 7 g CO2-eq/kWh for onshore and 11 g CO2-eq...

An approach to incorporate risks into a product's life-cycle assessment

International Nuclear Information System (INIS)

Pirhonen, P.

1995-01-01

Life-cycle assessment is usually based on regular discharges that occur at a more or less constant rate. Nevertheless, the more factors that are taken into account in the LCA the better picture it gives on the environmental aspects of a product. In this study an approach to incorporate accidental releases into a products' life-cycle assessment was developed. In this approach accidental releases are divided into two categories. The first category consists of those unplanned releases which occur with a predicted level and frequency. Due to the high frequency and small release size at a time, these accidental releases can be compared to continuous emissions. Their global impacts are studied in this approach. Accidental releases of the second category are sudden, unplanned releases caused by exceptional situations, e.g. technical failure, action error or disturbances in process conditions. These releases have a singular character and local impacts are typical of them. As far as the accidental releases of the second category are concerned, the approach introduced in this study results in a risk value for every stage of a life-cycle, the sum of which is a risk value for the whole life-cycle. Risk value is based on occurrence frequencies of incidents and potential environmental damage caused by releases. Risk value illustrates the level of potential damage caused by accidental releases related to the system under study and is meant to be used for comparison of these levels of two different products. It can also be used to compare the risk levels of different stages of the life-cycle. An approach was illustrated using petrol as an example product. The whole life-cycle of petrol from crude oil production to the consumption of petrol was studied

Life time calculations for LCF loading combined with tensional hold periods

International Nuclear Information System (INIS)

Bocek, M.; Armas, A.; Piel, D.

1983-01-01

The life time in high amplitude strain cycling with tensional hold periods is analysed presuming that creep failure damage is life determining. The life fraction rule (LFR) is used to calculate the life time consumpted during the dwell period in strain controlled tests as well as during tensional hold time stress cycles. It follows from the present investigation that stress relaxation occurring during the strain hold periods plays the dominant influence upon the relationship between life and dwell time. For strong stress relaxation (e.g. high temperature) less damage is accumulated as compared to suppressed relaxation (low temperature). The damage in stress relaxation is calculated by means of the LFR and the results are compared to experiments conducted on Zircaloy-4 and the austenitic stainless stell Type AISI 304. From the very good agreement between both it is concluded that under the loading conditions considered, creep failure damage is the main life determining damage contribution. (orig.)

Environmental sustainability assessment of hydropower plant in Europe using life cycle assessment

Science.gov (United States)

Mahmud, M. A. P.; Huda, N.; Farjana, S. H.; Lang, C.

2018-05-01

Hydropower is the oldest and most common type of renewable source of electricity available on this planet. The end of life process of hydropower plant have significant environmental impacts, which needs to be identified and minimized to ensure an environment friendly power generation. However, identifying the environmental impacts and health hazards are very little explored in the hydropower processing routes despite a significant quantity of production worldwide. This paper highlight the life-cycle environmental impact assessment of the reservoir based hydropower generation system located in alpine and non-alpine region of Europe, addressing their ecological effects by the ReCiPe and CML methods under several impact-assessment categories such as human health, ecosystems, global warming potential, acidification potential, etc. The Australasian life-cycle inventory database and SimaPro software are utilized to accumulate life-cycle inventory dataset and to evaluate the impacts. The results reveal that plants of alpine region offer superior environmental performance for couple of considered categories: global warming and photochemical oxidation, whilst in the other cases the outcomes are almost similar. Results obtained from this study will take part an important role in promoting sustainable generation of hydropower, and thus towards environment friendly energy production.

Risk Assessment and Life Cycle Assessment, Environmental Strategies, Nordic Workshop, Vedbæk 1999

DEFF Research Database (Denmark)

Poll, Christian

At a Nordic workshop on Product-oriented Environmental Strategies the roles of risk and hazard assessment and life cycle assessment of products in the future regulation of chemicals were discussed by participants representing administration, academia and industry from the Nordic countries....... This report compiles the papers and presentations given at the workshop. The papers present and discuss the different assessment tools and procedures - for individual chemicals through hazard and risk assessments and for products, materials and services through life-cycle assessment. The report also contains......, consultants and private enterprises to consider these well-established tools as individually necessary for the future regulation of the chemical pressure on the environment and to accept them as complementary to each other. Together with other process- or chain oriented tools like Substance or Material Flow...

The work environment disability-adjusted life year for use with life cycle assessment: a methodological approach.

Science.gov (United States)

Scanlon, Kelly A; Gray, George M; Francis, Royce A; Lloyd, Shannon M; LaPuma, Peter

2013-03-06

Life cycle assessment (LCA) is a systems-based method used to determine potential impacts to the environment associated with a product throughout its life cycle. Conclusions from LCA studies can be applied to support decisions regarding product design or public policy, therefore, all relevant inputs (e.g., raw materials, energy) and outputs (e.g., emissions, waste) to the product system should be evaluated to estimate impacts. Currently, work-related impacts are not routinely considered in LCA. The objectives of this paper are: 1) introduce the work environment disability-adjusted life year (WE-DALY), one portion of a characterization factor used to express the magnitude of impacts to human health attributable to work-related exposures to workplace hazards; 2) outline the methods for calculating the WE-DALY; 3) demonstrate the calculation; and 4) highlight strengths and weaknesses of the methodological approach. The concept of the WE-DALY and the methodological approach to its calculation is grounded in the World Health Organization's disability-adjusted life year (DALY). Like the DALY, the WE-DALY equation considers the years of life lost due to premature mortality and the years of life lived with disability outcomes to estimate the total number of years of healthy life lost in a population. The equation requires input in the form of the number of fatal and nonfatal injuries and illnesses that occur in the industries relevant to the product system evaluated in the LCA study, the age of the worker at the time of the fatal or nonfatal injury or illness, the severity of the injury or illness, and the duration of time lived with the outcomes of the injury or illness. The methodological approach for the WE-DALY requires data from various sources, multi-step instructions to determine each variable used in the WE-DALY equation, and assumptions based on professional opinion. Results support the use of the WE-DALY in a characterization factor in LCA. Integrating

Safeguard assessment for life extension in nuclear power plants (NPPs) using a production function

International Nuclear Information System (INIS)

Woo, Tae-Ho; Lee, Un-Chul

2011-01-01

Research highlights: → The numerical value is constructed for the secure operation. → As the power increases, the NSEF increases. → Specific month could be indicated by the relative value of NSEF. → It is suggested for the better power in NPPs. → There is another possibility for the secure operation factors. - Abstract: Life extension is investigated as a safeguard assessment for the stability on the operation of the nuclear power plants (NPPs). The Cobb-Douglas function, one of the production functions, is modified for the nuclear safeguard in NPPs, which was developed for the life quality of the social and natural objects. Nuclear Safeguard Estimator Function (NSEF) is developed for the application in NPPs. The cases of NPPs are compared with each other in the aspect of the secure performance. The results are obtained by the standard productivity comparisons with the designed power operations. The range of secure life extension is between 1.008 and 5.353 in 2000 MW e and the range is between 0.302 and 0.994 in 600 MW e . So, the successfulness of the power operation increases about 5 times higher than that of the interested power in this study, which means that the safeguard assessment has been performed in the life extension of the NPPs. The technology assessment (TA) is suggested for the safe operation which is an advanced method comparing conventional probabilistic safety assessment (PSA).

Assessing the environmental impacts of soil compaction in Life Cycle Assessment.

Science.gov (United States)

Stoessel, Franziska; Sonderegger, Thomas; Bayer, Peter; Hellweg, Stefanie

2018-07-15

Maintaining biotic capacity is of key importance with regard to global food and biomass provision. One reason for productivity loss is soil compaction. In this paper, we use a statistical empirical model to assess long-term yield losses through soil compaction in a regionalized manner, with global coverage and for different agricultural production systems. To facilitate the application of the model, we provide an extensive dataset including crop production data (with 81 crops and corresponding production systems), related machinery application, as well as regionalized soil texture and soil moisture data. Yield loss is modeled for different levels of soil depth (0-25cm, 25-40cm and >40cm depth). This is of particular relevance since compaction in topsoil is classified as reversible in the short term (approximately four years), while recovery of subsoil layers takes much longer. We derive characterization factors quantifying the future average annual yield loss as a fraction of the current yield for 100years and applicable in Life Cycle Assessment studies of agricultural production. The results show that crops requiring enhanced machinery inputs, such as potatoes, have a major influence on soil compaction and yield losses, while differences between mechanized production systems (organic and integrated production) are small. The spatial variations of soil moisture and clay content are reflected in the results showing global hotspot regions especially susceptible to soil compaction, e.g. the South of Brazil, the Caribbean Islands, Central Africa, and the Maharashtra district of India. The impacts of soil compaction can be substantial, with highest annual yield losses in the range of 0.5% (95% percentile) due to one year of potato production (cumulated over 100y this corresponds to a one-time loss of 50% of the present yield). These modeling results demonstrate the necessity for including soil compaction effects in Life Cycle Impact Assessment. Copyright © 2018

Brief Self-Report Scales Assessing Life History Dimensions of Mating and Parenting Effort

Directory of Open Access Journals (Sweden)

Daniel J. Kruger

2017-02-01

Full Text Available Life history theory (LHT is a powerful evolutionary framework for understanding physiological, psychological, and behavioral variation both between and within species. Researchers and theorists are increasingly integrating LHT into evolutionary psychology, as it provides a strong foundation for research across many topical areas. Human life history variation has been represented in psychological and behavioral research in several ways, including indicators of conditions in the developmental environment, indicators of conditions in the current environment, and indicators of maturation and life milestones (e.g., menarche, initial sexual activity, first pregnancy, and in self-report survey scale measures. Survey scale measures have included constructs such as time perspective and future discounting, although the most widely used index is a constellation of indicators assessing the K-factor, thought to index general life history speed (from fast to slow. The current project examined the utility of two brief self-report survey measures assessing the life history dimensions of mating effort and parenting effort with a large undergraduate sample in the United States. Consistent with the theory, items reflected two inversely related dimensions. In regressions including the K-factor, the Mating Effort Scale proved to be a powerful predictor of other constructs and indicators related to life history variation. The Parenting Effort Scale had less predictive power overall, although it explained unique variance across several constructs and was the only unique predictor of the number of long-term (serious and committed relationships. These scales may be valuable additions to self-report survey research projects examining life history variation.

Creep-fatigue life assessment of cruciform weldments using the linear matching method

International Nuclear Information System (INIS)

Gorash, Yevgen; Chen, Haofeng

2013-01-01

This paper presents a creep-fatigue life assessment of a cruciform weldment made of the steel AISI type 316N(L) and subjected to reversed bending and cyclic dwells at 550 °C using the Linear Matching Method (LMM) and considering different weld zones. The design limits are estimated by the shakedown analysis using the LMM and elastic-perfectly-plastic material model. The creep-fatigue analysis is implemented using the following material models: 1) Ramberg–Osgood model for plastic strains under saturated cyclic conditions; 2) power-law model in “time hardening” form for creep strains during primary creep stage. The number of cycles to failure N ⋆ under creep-fatigue interaction is defined by: a) relation for cycles to fatigue failure N ∗ dependent on numerical total strain range Δε tot for the fatigue damage ω f ; b) long-term strength relation for the time to creep rupture t ∗ dependent on numerical average stress σ ¯ during dwell Δt for the creep damage ω cr ; c) non-linear creep-fatigue interaction diagram for the total damage. Numerically estimated N ⋆ for different Δt and Δε tot shows good quantitative agreement with experiments. A parametric study of different dwell times Δt is used to formulate the functions for N ⋆ and residual life L ⋆ dependent on Δt and normalised bending moment M -tilde , and the corresponding contour plot intended for design applications is created. -- Highlights: ► Ramberg–Osgood model is used for plastic strains under saturated cyclic conditions. ► Power-law model in time-hardening form is used for creep strains during dwells. ► Life assessment procedure is based on time fraction rule to evaluate creep damage. ► Function for cycles to failure is dependent on dwell period and normalised moment. ► Function for FSRF dependent on dwell period takes into account the effect of creep

Bridging Arctic environmental science and life cycle assessment

DEFF Research Database (Denmark)

Johnsen, Fredrik Moltu

2014-01-01

Current research aims to make the impact assessment module of life cycle assessment (LCA) less site-generic and thus more relevant to particular regions. The Arctic region attracts its share of interest when it comes to environmental issues, but little research has been performed with the explicit...

Life cycle assessment of asphalt pavement maintenance.

Science.gov (United States)

2014-01-01

This study aims at developing a life cycle assessment (LCA) model to quantify the impact of pavement preservation on energy consumption and greenhouse gas (GHG) emissions. The construction stage contains material, manufacture, transportation and plac...

Assessing environmental impacts in a life cycle perspective

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky

2005-01-01

is focused on the product system which comprises all the processes which the product and its components meet throughout their lives- from the extraction of raw materials via manufacture, use and waste management to final disposal, or in short from the cradle to the grave (see Figure 1). The focus......What are the environmental impacts from an armchairor a cellular phone or a steak, if you take into account all the activities needed to produce, maintain, use or consume and eventually dispose of it? Life cycle impact assessment is the part of life cycle assessment (LCA) where the inventory...... of material flows in the life cycle of a product are translated into environmental impacts and consumption of resources, and questions like these are given an answer. The environmental impacts may range from very local (e.g. land use) to global (like climate change). As an environmental analysis tool, LCA...

Life-Space Assessment questionnaire: Novel measurement properties for Brazilian community-dwelling older adults.

Science.gov (United States)

Simões, Maria do Socorro Mp; Garcia, Isabel Ff; Costa, Lucíola da Cm; Lunardi, Adriana C

2018-05-01

The Life-Space Assessment (LSA) assesses mobility from the spaces that older adults go, and how often and how independent they move. Despite its increased use, LSA measurement properties remain unclear. The aim of the present study was to analyze the content validity, reliability, construct validity and interpretability of the LSA for Brazilian community-dwelling older adults. In this clinimetric study we analyzed the measurement properties (content validity, reliability, construct validity and interpretability) of the LSA administered to 80 Brazilian community-dwelling older adults. Reliability was analyzed by Cronbach's alpha (internal consistency), intraclass correlation coefficients and 95% confidence interval (reproducibility), and standard error of measurement (measurement error). Construct validity was analyzed by Pearson's correlations between the LSA and accelerometry (time in inactivity and moderate-to-vigorous activities), and interpretability was analyzed by determination of the minimal detectable change, and floor and ceiling effects. The LSA met the criteria for content validity. The Cronbach's alpha was 0.92, intraclass correlation coefficient was 0.97 (95% confidence interval 0.95-0.98) and standard error of measurement was 4.12. The LSA showed convergence with accelerometry (negative correlation with time in inactivity and positive correlation with time in moderate to vigorous activities), the minimal detectable change was 0.36 and we observed no floor or ceiling effects. The LSA showed adequate reliability, validity and interpretability for life-space mobility assessment of Brazilian community-dwelling older adults. Geriatr Gerontol Int 2018; 18: 783-789. © 2018 Japan Geriatrics Society.

Environmental Performance of Kettle Production: Product Life Cycle Assessment

Science.gov (United States)

Marcinkowski, Andrzej; Zych, Krzysztof

2017-12-01

The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA) conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach) where the main function is boiling 3360 l of water during 4-year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g). The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste scenario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix) which determined final comparison results. Basing on LCA results, some improvements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

ENVIRONMENTAL PERFORMANCE OF KETTLE PRODUCTION: PRODUCT LIFE CYCLE ASSESSMENT

Directory of Open Access Journals (Sweden)

Andrzej MARCINKOWSKI

2017-10-01

Full Text Available The main objective of this paper is to compare the environmental impact caused by two different types of water boiling processes. The aim was achieved thanks to product life cycle assessment (LCA conducted for stovetop and electric kettles. A literature review was carried out. A research model was worked out on the basis of data available in literature as well as additional experiments. In order to have a better opportunity to compare LCA results with reviewed literature, eco-indicator 99 assessment method was chosen. The functional unit included production, usage and waste disposal of each product (according to from cradle to grave approach where the main function is boiling 3360 l of water during 4- year period of time. A very detailed life cycle inventory was carried out. The mass of components was determined with accuracy of three decimal places (0.001 g. The majority of environmental impact is caused by electricity or natural gas consumption during usage stage: 92% in case of the electric and kettle and 99% in case of stovetop one. Assembly stage contributed in 7% and 0.8% respectively. Uncertainty and sensitivity analyses took into consideration various waste sce-nario patterns as well as demand for transport. Environmental impact turned out to be strongly sensitive to a chosen pattern of energy delivery (electricity mix which determined final comparison results. Basing on LCA results, some im-provements of products were suggested. The boiling time optimization was pointed out for electric kettle's efficiency improvement. Obtained results can be used by manufacturers in order to improve their eco-effectiveness. Moreover, conclusions following the research part can influence the future choices of home appliances users.

Comparative life cycle cost assessment of painted and hot-dip galvanized bridges.

Science.gov (United States)

Rossi, B; Marquart, S; Rossi, G

2017-07-15

The study addresses the life cycle cost assessment (LCCA) of steel bridges, focusing on the maintenance activities and the maintenance scenario. Firstly, the unit costs of maintenance activities and their durability (i.e. the time between two activities) are evaluated. Pragmatic data are provided for the environment category C4 and for three activities: Patch Up, Overcoating and Remove & Replace. A comparative LCCA for a typical hypothetic steel girder bridge is carried out, either painted or hot-dip galvanized (HDG), in the environmental class C4. The LCC versus the cumulated life is provided for both options. The initial cost of the steel unpainted option is only 50.3% of the HDG option. It is shown that after 'Overcoating' occurring at 18.5 years, the total Net Present Value (NPV) of the painted option surpasses that of the HDG option. A sensitivity analysis of the NPV to the cost and service life parameters, the escalation and discount rates is then performed. The discount and escalation rates, considerably influences the total LCC, following a non-linear trend. The total LCC decreases with the discount rate increasing and, conversely, increases with the escalation rate increasing. Secondly, the influence of the maintenance scenario on the total LCC is assessed based on a probabilistic approach. A permutation of the three independent maintenance activities assumed to occur six times over the life of the bridge is considered and a probability of occurrence is associated to each unique scenario. The most probable scenarios are then classified according to their NPV or achieved service life. This approach leads to the definition of a cost-effective maintenance scenario i.e. the scenario, within all the considered permutations, that has the minimum LCC in a range of lifespan. Besides, the probabilistic analysis also shows that, whatever the scenario, the return on investment period ranges between 18.5 years and 24.2 years. After that period, the HDG option becomes

Safety Culture Monitoring: How to Assess Safety Culture in Real Time?

International Nuclear Information System (INIS)

Zronek, B.; Maryska, J.; Treslova, L.

2016-01-01

Do you know what is current level of safety culture in your company? Are you able to follow trend changes? Do you know what your recent issues are? Since safety culture is understood as vital part of nuclear industry daily life, it is crucial to know what the current level is. It is common to perform safety culture survey or ad hoc assessment. This contribution shares Temelin NPP, CEZ approach how to assess safety culture level permanently. Using behavioral related outputs of gap solving system, observation program, dedicated surveys, regulatory assessment, etc., allows creating real time safety culture monitoring without the need to perform any other activities. (author)

Health-related quality of life assessments in osteoarthritis during NSAID treatment.

Science.gov (United States)

de Bock, G H; Hermans, J; van Marwijk, H W; Kaptein, A A; Mulder, J D

1996-08-01

There is some evidence that nabumetone (1000 mg once daily) in comparison with piroxicam (20 mg once daily) in patients with OA in general practice is associated with a lower incidence and less severe occurrence of stomach pain but with more withdrawals due to lack of efficacy. The aim of this analysis was to investigate whether these differences are reflected in health-related quality of life assessments. Patients (n = 198) included in this study were selected in general practice according to a protocol. The patients were randomized and treated for a period of six weeks. Clinical assessments were performed by the general practitioner (CP) during treatment. The Sickness Impact Profile (SIP), the Activities of Daily Living (ADL), and a pain questionnaire were filled out by the patients before and after treatment. As measured with the SIP, the ADL and the pain questionnaire, there were no significant differences between nabumetone and piroxicam. The correlations between (changes in) patient assessments and (changes in) clinical assessments were low. The differences between the two drugs regarding withdrawals and adverse events were not reflected by patient health-related quality of life assessments. There was a low correlation between patient health-related quality of life assessment and clinical assessments. To get a complete picture of the efficacy and safety of a drug, patient health-related quality of life assessments should be a part of a clinical trial.

Life cycle and nano-products: end-of-life assessment

International Nuclear Information System (INIS)

Asmatulu, Eylem; Twomey, Janet; Overcash, Michael

2012-01-01

Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center’s Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http

Life cycle and nano-products: end-of-life assessment

Energy Technology Data Exchange (ETDEWEB)

Asmatulu, Eylem; Twomey, Janet; Overcash, Michael, E-mail: mrovercash@earthlink.net [Wichita State University, Department of Industrial and Manufacturing Engineering (United States)

2012-03-15

Understanding environmental impacts of nanomaterials necessitates analyzing the life cycle profile. The initial emphasis of nanomaterial life cycle studies has been on the environmental and health effects of nanoproducts during the production and usage stages. Analyzing the end-of-life (eol) stage of nanomaterials is also critical because significant impacts or benefits for the environment may arise at that particular stage. In this article, the Woodrow Wilson Center's Project on Emerging Nanotechnologies (PEN) Consumer Products Inventory (CPI) model was used, which contains a relatively large and complete nanoproduct list (1,014) as of 2010. The consumer products have wide range of applications, such as clothing, sports goods, personal care products, medicine, as well as contributing to faster cars and planes, more powerful computers and satellites, better micro and nanochips, and long-lasting batteries. In order to understand the eol cycle concept, we allocated 1,014 nanoproducts into the nine end-of-life categories (e.g., recyclability, ingestion, absorption by skin/public sewer, public sewer, burning/landfill, landfill, air release, air release/public sewer, and other) based on probable final destinations of the nanoproducts. This article highlights the results of this preliminary assessment of end-of-life stage of nanoproducts. The largest potential eol fate was found to be recyclability, however little literature appears to have evolved around nanoproduct recycling. At lower frequency is dermal and ingestion human uptake and then landfill. Release to water and air are much lower potential eol fates for current nanoproducts. In addition, an analysis of nano-product categories with the largest number of products listed indicated that clothes, followed by dermal-related products and then sports equipment were the most represented in the PEN CPI (http

Life Cycle Assessment of Slurry Management Technologies

DEFF Research Database (Denmark)

Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...... of technologies) having the largest potential for reducing the overall environmental impacts....

Life cycle impact assessment (LCIA) using the ecological scarcity ...

African Journals Online (AJOL)

After it is done, the inventory will be interpreted to the environmental impacts in life cycle impact assessment (LCIA). Two LCIA methods identified were “midpoint and endpoint” approaches. The ecological scarcity (ecopoints) is an LCIA method using “midpoint” approach. From the analysis to both life cycle stages, analysis ...

Semantic catalogs for life cycle assessment data

NARCIS (Netherlands)

Kuczenski, Brandon; Davis, Christopher B.; Rivela, Beatriz; Janowicz, Krzysztof

2016-01-01

Life cycle assessment (LCA) is a highly interdisciplinary field that requires knowledge from different domains to be gathered and interpreted together. Although there are relatively few major data sources for LCA, the data themselves are presented with highly heterogeneous formats, interfaces, and

Telecardiology application in jordan: its impact on diagnosis and disease management, patients' quality of life, and time- and cost-savings.

Science.gov (United States)

Khader, Yousef Saleh; Jarrah, Mohamad Ismail; Al-Shudifat, Abde-Ellah M; Shdaifat, Amjad; Aljanabi, Husham; Al-Fakeh, Shadwan Ismeil; Turk, Elias Emil; Zayed, Khaled Ali; Al Quran, Hanadi A; Ellauzi, Ziad Mohd; Al Tahan, Mohammad

2014-01-01

Objectives. To assess the impact of live interactive telecardiology on diagnosis and disease management, patients' quality of life, and time- and cost-savings. Methods. All consecutive patients who attended or were referred to the teleclinics for suspected cardiac problems in two hospitals in remote areas of Jordan during the study period were included in the study. Patients were interviewed for relevant information and their quality of life was assessed during the first visit and 8 weeks after the last visit. Results. A total of 76 patients were included in this study. Final diagnosis and treatment plan were established as part of the telecardiology consultations in 71.1% and 77.3% of patients, respectively. Patients' travel was avoided for 38 (50.0%) who were managed locally. The majority of patients perceived that the visit to the telecardiology clinic results in less travel time (96.1%), less waiting time (98.1%), and lower cost (100.0%). Telecardiology consultations resulted in an improvement in the quality of life after two months of the first visit. Conclusions. Telecardiology care in remote areas of Jordan would improve the access to health care, help to reach proper diagnosis and establish the treatment plan, and improve the quality of life.

Life cycle assessment perspectives on delivering an infant in the US

International Nuclear Information System (INIS)

Campion, Nicole; Thiel, Cassandra L.; DeBlois, Justin; Woods, Noe C.; Landis, Amy E.; Bilec, Melissa M.

2012-01-01

This study introduces life cycle assessment as a tool to analyze one aspect of sustainability in healthcare: the birth of a baby. The process life cycle assessment case study presented evaluates two common procedures in a hospital, a cesarean section and a vaginal birth. This case study was conducted at Magee-Womens Hospital of the University of Pittsburgh Medical Center, which delivers over 10,000 infants per year. The results show that heating, ventilation, and air conditioning (HVAC), waste disposal, and the production of the disposable custom packs comprise a large percentage of the environmental impacts. Applying the life cycle assessment tool to medical procedures allows hospital decision makers to target and guide efforts to reduce the environmental impacts of healthcare procedures. - Highlights: ► Life cycle assessment helps identify the environmental impacts of medical procedures. ► Disposable custom packs represent a large portion of environmental impacts of births. ► Electricity loading contributes to global warming potential and respiratory effects. ► Impact improvements should focus on heating, ventilation, and air conditioning and disposable custom packs.

Having the Time of Their Life: College Student Stress, Dating and Satisfaction with Life.

Science.gov (United States)

Coccia, Catherine; Darling, Carol A

2016-02-01

A cross-sectional design based on the family ecosystem framework was used to examine how students' time spent engaging in social interactions and personal behaviours was related to dating, stress and satisfaction with life. The data were extracted from the Parental Indulgence of Emerging Adults study and consisted of 534 students at a southeastern university. The findings indicated that the amount of time involved in non-verbal social interactions, such as texting and social networking, along with solitary activities, such as watching TV and studying, was negatively related to students' life satisfaction. In comparison, being in a relationship and talking to people on the phone were positively related to students' life satisfaction. These results have implications for family and health professionals along with university wellness centres that facilitate student health by incorporating preventative measures to help students deal with their stress. Copyright © 2014 John Wiley & Sons, Ltd.

Life cycle assessment of electronic waste treatment.

Science.gov (United States)

Hong, Jinglan; Shi, Wenxiao; Wang, Yutao; Chen, Wei; Li, Xiangzhi

2015-04-01

Life cycle assessment was conducted to estimate the environmental impact of electronic waste (e-waste) treatment. E-waste recycling with an end-life disposal scenario is environmentally beneficial because of the low environmental burden generated from human toxicity, terrestrial ecotoxicity, freshwater ecotoxicity, and marine ecotoxicity categories. Landfill and incineration technologies have a lower and higher environmental burden than the e-waste recycling with an end-life disposal scenario, respectively. The key factors in reducing the overall environmental impact of e-waste recycling are optimizing energy consumption efficiency, reducing wastewater and solid waste effluent, increasing proper e-waste treatment amount, avoiding e-waste disposal to landfill and incineration sites, and clearly defining the duties of all stakeholders (e.g., manufacturers, retailers, recycling companies, and consumers). Copyright © 2015 Elsevier Ltd. All rights reserved.

Gender Convergence in Housework Time: A Life Course and Cohort Perspective

Directory of Open Access Journals (Sweden)

Thomas Leopold

2018-05-01

Full Text Available Knowledge about gender convergence in housework time is confined to changes studied across repeated cross-sections of data. This study adds a dynamic view that links broader social shifts in men’s and women’s housework time to individual life-course profiles. Using panel data from the German Socio-Economic Panel Study (1985–2015, our analysis is the first to trace changes in housework time across the entire adult life course (ages 20–90 and across a large range of cohorts (1920–1990. The results revealed two types of gender convergence in housework time. First, the gender gap converged across the life course, narrowing by more than 50 percent from age 35 until age 70. Life-course profiles of housework time were strongly gendered, as women's housework time peaked in younger adulthood and declined thereafter, whereas men’s housework time remained stably low for decades and increased only in older age. Second, the gender gap converged across cohorts, narrowing by 40 percent from cohorts 1940 until 1960. Cohort profiles of housework time showed strong declines in women and moderate increases in men. Both cohort trends were linear and extended to the most recently born, supporting the notion of continued convergence in housework time.

Life Cycle Assessment of Polymers in Qatar

OpenAIRE

ÖZERKAN, Nesibe Gözde; ADEED, Mariam AIMa’; KAHRAMAN, Ramazan

2011-01-01

Life Cycle Assessment (LCA) is gaining wider acceptance as a method that evaluates the environmental burdens associated with a product, process or activity by identifying and quantifying energy and materials used and wastes released to the environment, and assesses the impact of those energy and material used and released to the environment. It is also considered as one of the best environmental management tools that can be used to compare alternative eco-performances of recycling or disposal...

Comparative Human Health Impact Assessment of Engineered Nanomaterials in the Framework of Life Cycle Assessment.

Science.gov (United States)

Fransman, Wouter; Buist, Harrie; Kuijpers, Eelco; Walser, Tobias; Meyer, David; Zondervan-van den Beuken, Esther; Westerhout, Joost; Klein Entink, Rinke H; Brouwer, Derk H

2017-07-01

For safe innovation, knowledge on potential human health impacts is essential. Ideally, these impacts are considered within a larger life-cycle-based context to support sustainable development of new applications and products. A methodological framework that accounts for human health impacts caused by inhalation of engineered nanomaterials (ENMs) in an indoor air environment has been previously developed. The objectives of this study are as follows: (i) evaluate the feasibility of applying the CF framework for NP exposure in the workplace based on currently available data; and (ii) supplement any resulting knowledge gaps with methods and data from the life cycle approach and human risk assessment (LICARA) project to develop a modified case-specific version of the framework that will enable near-term inclusion of NP human health impacts in life cycle assessment (LCA) using a case study involving nanoscale titanium dioxide (nanoTiO 2 ). The intent is to enhance typical LCA with elements of regulatory risk assessment, including its more detailed measure of uncertainty. The proof-of-principle demonstration of the framework highlighted the lack of available data for both the workplace emissions and human health effects of ENMs that is needed to calculate generalizable characterization factors using common human health impact assessment practices in LCA. The alternative approach of using intake fractions derived from workplace air concentration measurements and effect factors based on best-available toxicity data supported the current case-by-case approach for assessing the human health life cycle impacts of ENMs. Ultimately, the proposed framework and calculations demonstrate the potential utility of integrating elements of risk assessment with LCA for ENMs once the data are available. © 2016 Society for Risk Analysis.

Agreement in Quality of Life Assessment between Adolescents with Intellectual Disability and Their Parents

Science.gov (United States)

Golubovic, Spela; Skrbic, Renata

2013-01-01

Intellectual disability affects different aspects of functioning and quality of life, as well as the ability to independently assess the quality of life itself. The paper examines the agreement in the quality of life assessments made by adolescents with intellectual disability and their parents compared with assessments made by adolescents without…

Model of environmental life cycle assessment for coal mining operations

Energy Technology Data Exchange (ETDEWEB)

Burchart-Korol, Dorota, E-mail: dburchart@gig.eu; Fugiel, Agata, E-mail: afugiel@gig.eu; Czaplicka-Kolarz, Krystyna, E-mail: kczaplicka@gig.eu; Turek, Marian, E-mail: mturek@gig.eu

2016-08-15

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500 years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. - Highlights: • A computational LCA model for assessment of coal mining operations • Identification of

Model of environmental life cycle assessment for coal mining operations

International Nuclear Information System (INIS)

Burchart-Korol, Dorota; Fugiel, Agata; Czaplicka-Kolarz, Krystyna; Turek, Marian

2016-01-01

This paper presents a novel approach to environmental assessment of coal mining operations, which enables assessment of the factors that are both directly and indirectly affecting the environment and are associated with the production of raw materials and energy used in processes. The primary novelty of the paper is the development of a computational environmental life cycle assessment (LCA) model for coal mining operations and the application of the model for coal mining operations in Poland. The LCA model enables the assessment of environmental indicators for all identified unit processes in hard coal mines with the life cycle approach. The proposed model enables the assessment of greenhouse gas emissions (GHGs) based on the IPCC method and the assessment of damage categories, such as human health, ecosystems and resources based on the ReCiPe method. The model enables the assessment of GHGs for hard coal mining operations in three time frames: 20, 100 and 500 years. The model was used to evaluate the coal mines in Poland. It was demonstrated that the largest environmental impacts in damage categories were associated with the use of fossil fuels, methane emissions and the use of electricity, processing of wastes, heat, and steel supports. It was concluded that an environmental assessment of coal mining operations, apart from direct influence from processing waste, methane emissions and drainage water, should include the use of electricity, heat and steel, particularly for steel supports. Because the model allows the comparison of environmental impact assessment for various unit processes, it can be used for all hard coal mines, not only in Poland but also in the world. This development is an important step forward in the study of the impacts of fossil fuels on the environment with the potential to mitigate the impact of the coal industry on the environment. - Highlights: • A computational LCA model for assessment of coal mining operations • Identification of

Application of Life Cycle Assessment (LCA) in Sugar Industries

Science.gov (United States)

Astuti, Arieyanti Dwi; Astuti, Rahayu Siwi Dwi; Hadiyanto, Hadiyanto

2018-02-01

Sugar is one of the main commodities that are needed for human life. The demand of sugar is very high with the trend increase from year to year. This condition makes the sugar industry become a leading industry that must be maintained sustainability. The sustainability of the sugar industry is influenced by the use of energy and natural resources and the resulting environmental impacts. Therefore, an effort is needed to analyze the environmental aspects and potential environmental impacts resulting from a product (sugar), by using Life Cycle Assessment (LCA). LCA is a very important tool for the analysis of a process/system from its cradle to grave. This technique is very useful in the estimation of energy usage and environmental load of a product/system. This paper aims to describe the main elements of sugar industries using Life Cycle Assessment.

Life Cycle Impact Assessment in the Arctic: Challenges and Research Needs

Directory of Open Access Journals (Sweden)

Johan Berg Pettersen

2017-09-01

Full Text Available Life cycle assessment (LCA is increasingly used for environmental assessment of products and production processes to support environmental decision-making both worldwide and in the Arctic. However, there are several weaknesses in the impact assessment methodology in LCA, e.g., related to uncertainties of impact assessment results, absence of spatial differentiation in characterization modeling, and gaps in the coverage of impact pathways of different “archetypal” environments. Searching for a new resource base and areas for operation, marine and marine-based industries are continuously moving north, which underlines the need for better life cycle impact assessment in the Arctic, particularly to aid in industrial environmental management systems and stakeholder communications. This paper aims to investigate gaps and challenges in the application of the currently available impact assessment methods in the Arctic context. A simplified Arctic mining LCA case study was carried out to demonstrate the relevance of Arctic emissions at the midpoint and endpoint levels, as well as possible influences of the Arctic context on the impact assessment results. Results of this study showed that significant research gaps remain in Arctic-dependent life cycle impact assessment, particularly on: (i the possible influences of the Arctic-specific features on characterization factors for impact assessment (such as seasonality, cold climate, precipitation, and marine dependence; and (ii the coverage of impact pathways, especially on the under-addressed marine impacts and marine/near-shore dispersion processes. Addressing those identified research gaps and demand for future Arctic life cycle impact assessment could increase the credibility of LCA as an environmental decision-making support tool for Arctic industries and better support sustainable Arctic development.

Assessing the impact of care farms on quality of life and offending

NARCIS (Netherlands)

Elsey, Helen; Farragher, Tracey; Tubeuf, Sandy; Bragg, Rachel; Elings, Marjolein; Brennan, Cathy; Gold, Rochelle; Shickle, Darren; Wickramasekera, Nyantara; Richardson, Zoe; Cade, Janet; Murray, Jenni

2018-01-01

Objectives To assess the feasibility of conducting a cost-effectiveness study of using care farms (CFS) to improve quality of life and reduce reoffending among offenders undertaking community orders (COs). To pilot questionnaires to assess quality of life, connection to nature, lifestyle behaviours,

Developing IAM for Life Cycle Safety Assessment

NARCIS (Netherlands)

Toxopeus, Marten E.; Lutters, Diederick; Nee, Andrew Y.C.; Song, Bin; Ong, Soh-Khim

2013-01-01

This publication discusses aspects of the development of an impact assessment method (IAM) for safety. Compared to the many existing IAM’s for environmentally oriented LCA, this method should translate the impact of a product life cycle on the subject of safety. Moreover, the method should be

Assessment of Environmental and Economic Impacts of Vine-Growing Combining Life Cycle Assessment, Life Cycle Costing and Multicriterial Analysis

Directory of Open Access Journals (Sweden)

Giacomo Falcone

2016-08-01

Full Text Available The wine sector is going through a significant evolution dealing with the challenges of competition issues in international markets and with necessary commitments to sustainability improvement. In the wine supply chain, the agricultural phase represents a potential source of pollution and costs. From the farmers’ point of view, these contexts require them to be more attentive and find a compromise among environmental benefits, economic benefits, and costs linked to farming practices. This paper aims to make a sustainability assessment of different wine-growing scenarios located in Calabria (Southern Italy that combines conflicting insights, i.e., environmental and economic ones, by applying Life Cycle Assessment (LCA and Life Cycle Costing (LCC to identify the main hotspots and select the alternative scenarios closest to the ideal solution through the VIKOR multicriteria method. In particular, the latter allowed us to obtain synthetic indices for a two-dimensional sustainability assessment. Conventional practices associated to the espalier training system represent the best compromise from both environmental and economic points of view, due to the higher yield per hectare. The choices regarding Functional Unit (FU and indicators were shown to have a high influence on results.

Integrative Application of Life Cycle Assessment and Risk Assessment to Environmental Impacts of Anthropogenic Pollutants at a Watershed Scale.

Science.gov (United States)

Lin, Xiaodan; Yu, Shen; Ma, Hwongwen

2018-01-01

Intense human activities have led to increasing deterioration of the watershed environment via pollutant discharge, which threatens human health and ecosystem function. To meet a need of comprehensive environmental impact/risk assessment for sustainable watershed development, a biogeochemical process-based life cycle assessment and risk assessment (RA) integration for pollutants aided by geographic information system is proposed in this study. The integration is to frame a conceptual protocol of "watershed life cycle assessment (WLCA) for pollutants". The proposed WLCA protocol consists of (1) geographic and environmental characterization mapping; (2) life cycle inventory analysis; (3) integration of life-cycle impact assessment (LCIA) with RA via characterization factor of pollutant of interest; and (4) result analysis and interpretation. The WLCA protocol can visualize results of LCIA and RA spatially for the pollutants of interest, which might be useful for decision or policy makers for mitigating impacts of watershed development.

Extending Vulnerability Assessment to Include Life Stages Considerations.

Science.gov (United States)

Hodgson, Emma E; Essington, Timothy E; Kaplan, Isaac C

2016-01-01

Species are experiencing a suite of novel stressors from anthropogenic activities that have impacts at multiple scales. Vulnerability assessment is one tool to evaluate the likely impacts that these stressors pose to species so that high-vulnerability cases can be identified and prioritized for monitoring, protection, or mitigation. Commonly used semi-quantitative methods lack a framework to explicitly account for differences in exposure to stressors and organism responses across life stages. Here we propose a modification to commonly used spatial vulnerability assessment methods that includes such an approach, using ocean acidification in the California Current as an illustrative case study. Life stage considerations were included by assessing vulnerability of each life stage to ocean acidification and were used to estimate population vulnerability in two ways. We set population vulnerability equal to: (1) the maximum stage vulnerability and (2) a weighted mean across all stages, with weights calculated using Lefkovitch matrix models. Vulnerability was found to vary across life stages for the six species explored in this case study: two krill-Euphausia pacifica and Thysanoessa spinifera, pteropod-Limacina helicina, pink shrimp-Pandalus jordani, Dungeness crab-Metacarcinus magister and Pacific hake-Merluccius productus. The maximum vulnerability estimates ranged from larval to subadult and adult stages with no consistent stage having maximum vulnerability across species. Similarly, integrated vulnerability metrics varied greatly across species. A comparison showed that some species had vulnerabilities that were similar between the two metrics, while other species' vulnerabilities varied substantially between the two metrics. These differences primarily resulted from cases where the most vulnerable stage had a low relative weight. We compare these methods and explore circumstances where each method may be appropriate.

An examination of psychosocial variables moderating the relationship between life stress and injury time-loss among athletes of a high standard.

Science.gov (United States)

Ford, I W; Eklund, R C; Gordon, S

2000-05-01

Based on Williams and Andersen's model of stress and athletic injury, six psychosocial variables were assessed as possible moderators of the relationship between life stress and injury among 121 athletes (65 males, 56 females) competing in a variety of sports at state, national or international level. No significant effects of the sex of the participants were evident. Correlational analyses revealed moderator effects of several variables. Specifically, dispositional optimism and hardiness were related to decreased injury time-loss in athletes when positive life change increased, and global self-esteem was associated with decreased injury time-loss when both negative life change and total life change increased. The results indicate that athletes with more optimism, hardiness or global self-esteem may cope more effectively with life change stress, resulting in reduced injury vulnerability and recovery rates.

Longitudinal assessments of quality of life and late toxicities before and after definitive chemoradiation for esophageal cancer

International Nuclear Information System (INIS)

Yamashita, Hideomi; Omori, Mami; Okuma, Kae; Kobayashi, Reiko; Igaki, Hiroshi; Nakagawa, Keiichi

2014-01-01

Definitive chemoradiotherapy is often considered for locally advanced esophageal cancer. We studied the effect of chemoradiotherapy treatment on patients' quality of life and late toxicities. Patients undergoing definitive 5-fluorouracil and cis-diammine-glycolatoplatinum (nedaplatin) therapy concurrent with radiotherapy for esophageal cancer without operation adaptation completed standardized quality-of-life questionnaires before and after chemoradiotherapy and at regular times up to -5 years. We analyzed differences in a generic quality-of-life score questionnaire (Functional Assessment of Cancer Therapy-Esophageal scoring) over time by using a linear mixed-effects model. Longitudinal changes before the start of treatment were able to be evaluated in a total of 80 patients. The quality-of-life score before treatment was worse in patients with advanced stages than those with early stages. The quality-of-life score deteriorated once at the time of 2 or 3 months after starting chemoradiotherapy compared with pre-chemoradiotherapy and recovered and rose higher at 4 or 5 months than before starting chemoradiotherapy. After that, the recovery of quality of life was maintained up to the observation end. The score of physical functioning such as fatigue, nausea/vomiting, pain and dyspnea deteriorated at the time of 2 or 3 months after starting chemoradiotherapy compared with before chemoradiotherapy (80, 86, 94 and 89%). The quality-of-life score deteriorates once from before treatment due to acute complications by chemoradiotherapy, but recovers at 4 or 5 months and becomes better than before treatment. (author)

Life cycle assessment of construction and demolition waste management

DEFF Research Database (Denmark)

Butera, Stefania; Christensen, Thomas Højlund; Astrup, Thomas Fruergaard

2015-01-01

Life cycle assessment (LCA) modelling of construction and demolition waste (C&DW) management was carried out. The functional unit was management of 1 Mg mineral, source separated C&DW, which is either utilised in road construction as a substitute for natural aggregates, or landfilled. The assessed...... of the use of C&DW. Typical uncertainties related to contaminant leaching were addressed. For most impact categories, utilisation of C&DW in road construction was preferable to landfilling; however, for most categories, utilisation resulted in net environmental burdens. Transportation represented the most...... of the impact assessment was critical for modelling the leaching impacts. Compared with the overall life cycle of building and construction materials, leaching emissions were shown to be potentially significant for toxicity impacts, compared with contributions from production of the same materials, showing...

Assessment of the quality of life in cities. Environmental conditions and mobility

Directory of Open Access Journals (Sweden)

Sonja Forward

2006-01-01

Full Text Available The main objective of the paper is to provide knowledge about the practice of life quality assessment by different disciplines in connection with different types of public measures in the area of town planning and design, transportation and mobility. In this way we want to improve the understanding of responsible politicians and experts about assessment of quality of life. It is an introductory paper to a research about analysis of how mobility policies affect quality of life. The main product will be advice for improved assessment processes. The developed instruments will be tested in a pilot study.

Fracture mechanics based life assessment in petrochemical plants

International Nuclear Information System (INIS)

Norasiah Ab Kasim; Abd Nassir Ibrahim; Ab Razak Hamzah; Shukri Mohd

2004-01-01

The increasing use of thick walled pressure vessels in petrochemical plants operating at high pressure under severe service conditions could lead to catastrophic failure. In the Malaysian Institute for Nuclear Technology Research (MINT), initial efforts are underway to apply fracture mechanics approach for assessment of significance of defects detected during periodic in service inspection (ISI) of industrial plants. This paper outlines the integrity management strategy based on fracture mechanics and proposes a new procedure for life assessment of petrochemical plants based on ASME Boiler and Pressure Vessel Code, Section XI, BSI PD 6493:1991, BSI 6539:1994, BSI Standard 7910:1999 and API 579:2000. Essential relevant data required for the assessment is listed. Several methods available for determination of fracture toughness are reviewed with limitations in their application to petrochemical plants. A new non destructive method for determination of fracture toughness based on hardness testing and normalized key roughness curve is given. Results of fracture mechanics based life assessment conducted for 100 mm thick ammonia converter of Ni r o steel and 70 mm thick plat forming reactor vessel of ASTM A 38 7 grade B steel in operational fertilizer and petroleum refining plants are presented. (Author)

Assessment of HIV/AIDS and Life Skills Delivery in Primary Schools in Tanzania

Science.gov (United States)

Rushahu, Bernadetha Gabriel

2015-01-01

This study was conducted to assess the effectiveness of HIV/AIDS and the Life Skills Education delivery in primary schools in Tanzania. Specifically the study investigated pupils' views about the effect of HIV/AIDS and Life Skills teaching in primary schools in Tanzania; assessed pupils' knowledge related to HIV/AIDS and Life Skills education, and…

Time-dependent fatigue--phenomenology and life prediction

International Nuclear Information System (INIS)

Coffin, L.F.

1979-01-01

The time-dependent fatigue behavior of materials used or considered for use in present and advanced systems for power generation is outlined. A picture is first presented to show how basic mechanisms and phenomenological information relate to the performance of the component under consideration through the so-called local strain approach. By this means life prediction criteria and design rules can be formulated utilizing laboratory test information which is directly translated to predicting the performance of a component. The body of phenomenological information relative to time-dependent fatigue is reviewed. Included are effects of strain range, strain rate and frequency, environment and wave shape, all of which are shown to be important in developing both an understanding and design base for time dependent fatigue. Using this information, some of the current methods being considered for the life prediction of components are reviewed. These include the current ASME code case, frequency-modified fatigue equations, strain range partitioning, the damage function method, frequency separation and damage rate equations. From this review, it is hoped that a better perspective on future directions for basic material science at high temperature can be achieved

Life cycle assessment perspectives on delivering an infant in the US

Energy Technology Data Exchange (ETDEWEB)

Campion, Nicole [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States); Thiel, Cassandra L., E-mail: clt31@pitt.edu [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States); DeBlois, Justin [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States); Woods, Noe C. [Magee-Womens Hospital of UPMC, 300 Halket Street, Pittsburgh, PA 15235 (United States); Landis, Amy E. [Arizona State University, P.O. Box 875306, Tempe, AZ 85287-5306 (United States); Bilec, Melissa M. [University of Pittsburgh, 949 Benedum Hall, Pittsburgh, PA 15261 (United States)

2012-05-15

This study introduces life cycle assessment as a tool to analyze one aspect of sustainability in healthcare: the birth of a baby. The process life cycle assessment case study presented evaluates two common procedures in a hospital, a cesarean section and a vaginal birth. This case study was conducted at Magee-Womens Hospital of the University of Pittsburgh Medical Center, which delivers over 10,000 infants per year. The results show that heating, ventilation, and air conditioning (HVAC), waste disposal, and the production of the disposable custom packs comprise a large percentage of the environmental impacts. Applying the life cycle assessment tool to medical procedures allows hospital decision makers to target and guide efforts to reduce the environmental impacts of healthcare procedures. - Highlights: Black-Right-Pointing-Pointer Life cycle assessment helps identify the environmental impacts of medical procedures. Black-Right-Pointing-Pointer Disposable custom packs represent a large portion of environmental impacts of births. Black-Right-Pointing-Pointer Electricity loading contributes to global warming potential and respiratory effects. Black-Right-Pointing-Pointer Impact improvements should focus on heating, ventilation, and air conditioning and disposable custom packs.

Time to consider search strategies for complex life on exoplanets

Science.gov (United States)

Schulze-Makuch, Dirk; Bains, William

2018-05-01

Upcoming telescopes might be able to detect signatures of complex life on other worlds, but we need to involve physical, chemical and life scientists at the planning stage in order to interpret the findings when the time comes.

Total environmental impacts of biofuels from corn stover using a hybrid life cycle assessment model combining process life cycle assessment and economic input-output life cycle assessment.

Science.gov (United States)

Liu, Changqi; Huang, Yaji; Wang, Xinye; Tai, Yang; Liu, Lingqin; Liu, Hao

2018-01-01

Studies on the environmental analysis of biofuels by fast pyrolysis and hydroprocessing (BFPH) have so far focused only on the environmental impacts from direct emissions and have included few indirect emissions. The influence of ignoring some indirect emissions on the environmental performance of BFPH has not been well investigated and hence is not really understood. In addition, in order to avoid shifting environmental problems from one medium to another, a comprehensive assessment of environmental impacts caused by the processes must quantify the environmental emissions to all media (air, water, and land) in relation to each life cycle stage. A well-to-wheels assessment of the total environmental impacts resulting from direct emissions and indirect emissions of a BFPH system with corn stover is conducted using a hybrid life cycle assessment (LCA) model combining the economic input-output LCA and the process LCA. The Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) has been used to estimate the environmental impacts in terms of acidification, eutrophication, global climate change, ozone depletion, human health criteria, photochemical smog formation, ecotoxicity, human health cancer, and human health noncancer caused by 1 MJ biofuel production. Taking account of all the indirect greenhouse gas (GHG) emissions, the net GHG emissions (81.8 g CO 2 eq/MJ) of the biofuels are still less than those of petroleum-based fuels (94 g CO 2 eq/MJ). Maize production and pyrolysis and hydroprocessing make major contributions to all impact categories except the human health criteria. All impact categories resulting from indirect emissions except eutrophication and smog air make more than 24% contribution to the total environmental impacts. Therefore, the indirect emissions are important and cannot be ignored. Sensitivity analysis has shown that corn stover yield and bio-oil yield affect the total environmental impacts of the biofuels

Dealing with Emergy Algebra in the Life Cycle Assessment Framework

Science.gov (United States)

The Life Cycle Inventory (LCI) represents one of the four steps of the Life Cycle Assessment (LCA) methodology, which is a standardized procedure (ISO 14040:2006) to estimate the environmental impacts generated by the production, use and disposal of goods and services. In this co...

An attributional life cycle assessment for an Italian residential multifamily building.

Science.gov (United States)

Vitale, Pierluca; Arena, Umberto

2017-09-06

The study describes an attributional life cycle assessment carried out according to the ISO standards and focused on an Italian multifamily residential building. The aim was developing an exhaustive and reliable inventory of high-quality primary data, comparing the environmental impacts along the three stages of the building life cycle. The pre-use phase takes into account the production of all the construction materials, transportation, and on-site assembling. The use phase quantifies the resource consumptions for 50 years of the building utilization and ordinary maintenance. The end-of-life phase includes the building demolition and the management of generated wastes. The results quantify how the design criteria affect the environmental performances of the residential building along its life cycle. The role of the pre-use phase appears remarkable for global warming potential (GWP), due to the huge impacts of steel and concrete production processes. The use phase gives the largest contributions, which reach 77% and 84% of the total, for the categories of global warming and non-renewable energy. The end-of-life phase provides limited avoided impacts. A comparative analysis quantifies the improvements achievable with an alternative type of partitions and external walls. Acronyms: AC: air conditioning; C&DW: construction and demolition waste; CFL: compact fluorescent lamp; DHW: domestic hot water; EC: European Commission; EU: European Union; GDP: gross domestic product; GHG: greenhouse gases; GWP: global warming potential; LCA: life cycle assessment; LCI: life cycle inventory; LCIA: life cycle impact assessment; MFA: material flow analysis; NREP: non-renewable energy potential; RINP: respiratory inorganics potential; WFD: Waste Framework Directive.

Predicting the life-time benefit of school-based smoking prevention programmes.

Science.gov (United States)

Jit, Mark; Aveyard, Paul; Barton, Pelham; Meads, Catherine A

2010-06-01

School-based smoking prevention programmes may delay the age of smoking initiation, but do not appear to achieve lasting reductions in smoking prevalence beyond school-leaving age. We explored whether delaying the age at which someone initiates smoking may have life-time benefits by increasing the likelihood of quitting in later life. Data from the General Household Survey of Great Britain were used in a logistic regression model to examine the association between age at which someone initiates regular smoking and the probability that the person will quit smoking later in life. The effect of confounding variables (sex, ethnicity, socio-economic class, education and geographical location) was taken into account. The predicted relationship was used in a cohort model to estimate the life-time reduction in smoking prevalence and all-cause mortality of a school-based smoking prevention programme. Age of regular smoking initiation was associated strongly with the probability of quitting later in life (coefficient -0.103, P < 0.001). The strength of the association was slightly reduced but still significant when confounding variables were included (coefficient -0.075, P < 0.001). An intervention that delays smoking initiation without decreasing smoking prevalence at age 18 may reduce adult smoking prevalence by 0.13-0.32% (depending on age) and all-cause mortality by 0.09% over the life-time of the sample. School-based smoking prevention programmes have potential for a beneficial effect over the life-time of the participants even if they have no apparent effect at school-leaving age.

Life-cycle cost assessment of seismically base-isolated structures in nuclear power plants

International Nuclear Information System (INIS)

Wang, Hao; Weng, Dagen; Lu, Xilin; Lu, Liang

2013-01-01

Highlights: • The life-cycle cost of seismic base-isolated nuclear power plants is modeled. • The change law of life-cycle cost with seismic fortification intensity is studied. • The initial cost of laminated lead rubber bearings can be expressed as the function of volume. • The initial cost of a damper can be expressed as the function of its maximum displacement and tonnage. • The use of base-isolation can greatly reduce the expected damage cost, which leads to the reduction of the life-cycle cost. -- Abstract: Evaluation of seismically base-isolated structural life-cycle cost is the key problem in performance based seismic design. A method is being introduced to address the life-cycle cost of base-isolated reinforced concrete structures in nuclear power plants. Each composition of life-cycle cost is analyzed including the initial construction cost, the isolators cost and the excepted damage cost over life-cycle of the structure. The concept of seismic intensity is being used to estimate the expected damage cost, greatly simplifying the calculation. Moreover, French Cruas nuclear power plant is employed as an example to assess its life-cycle cost, compared to the cost of non-isolated plant at the same time. The results show that the proposed method is efficient and the expected damage cost is enormously reduced because of the application of isolators, which leads to the reduction of the life-cycle cost of nuclear power plants

Life cycle assessment for next generating vehicles. Feasibility study of alternative fuel vehicles and electric vehicles; Jisedai jidosha no life cycle assessment. Daitai nenryo jidosha oyobi denki jidosha no feasibility study

Energy Technology Data Exchange (ETDEWEB)

Hanyu, T; Iida, N [Keio University, Tokyo (Japan)

1997-10-01

To show environmental assessment of introduction of substitute fuel vehicles is important information to formulate the future vehicles policy. Life cycle assessment (LCA) is put forward to simulate such potential, allows us to state the reduction environmental impacts of substitute vehicles on their total life cycle. The purpose of this study is assessment and analysis of the life cycle CO2 emission for substitute fuel vehicles, such as, alternative fuel vehicles, electric vehicles, and hybrid electric vehicles. 8 refs., 9 figs., 3 tabs.

Assessing College Student-Athletes' Life Stress: Initial Measurement Development and Validation

Science.gov (United States)

Lu, Frank Jing-Horng; Hsu, Ya-Wen; Chan, Yuan-Shuo; Cheen, Jang-Rong; Kao, Kuei-Tsu

2012-01-01

College student-athletes have unique life stress that warrants close attention. The purpose of this study was to develop a reliable and valid measurement assessing college student-athletes' life stress. In Study 1, a focus group discussion and Delphi method produced a questionnaire draft, termed the College Student-Athletes' Life Stress Scale. In…

Seismic assessment of a site using the time series method

International Nuclear Information System (INIS)

Krutzik, N.J.; Rotaru, I.; Bobei, M.; Mingiuc, C.; Serban, V.; Androne, M.

1997-01-01

To increase the safety of a NPP located on a seismic site, the seismic acceleration level to which the NPP should be qualified must be as representative as possible for that site, with a conservative degree of safety but not too exaggerated. The consideration of the seismic events affecting the site as independent events and the use of statistic methods to define some safety levels with very low annual occurrence probability (10 -4 ) may lead to some exaggerations of the seismic safety level. The use of some very high value for the seismic acceleration imposed by the seismic safety levels required by the hazard analysis may lead to very costly technical solutions that can make the plant operation more difficult and increase maintenance costs. The considerations of seismic events as a time series with dependence among the events produced, may lead to a more representative assessment of a NPP site seismic activity and consequently to a prognosis on the seismic level values to which the NPP would be ensured throughout its life-span. That prognosis should consider the actual seismic activity (including small earthquakes in real time) of the focuses that affect the plant site. The paper proposes the applications of Autoregressive Time Series to issue a prognosis on the seismic activity of a focus and presents the analysis on Vrancea focus that affects NPP Cernavoda site, by this method. The paper also presents the manner to analyse the focus activity as per the new approach and it assesses the maximum seismic acceleration that may affect NPP Cernavoda throughout its life-span (∼ 30 years). Development and applications of new mathematical analysis method, both for long - and short - time intervals, may lead to important contributions in the process of foretelling the seismic events in the future. (authors)

Life cycle assessment of a multi-megawatt wind turbine

Energy Technology Data Exchange (ETDEWEB)

Martinez, E.; Pellegrini, S. [Grupo Eolicas Riojanas, R and D Division, Carretera de Laguardia, 91-93, 26006 Logrono, La Rioja (Spain); Sanz, F.; Blanco, J. [Department of Mechanical Engineering, University of La Rioja, Logrono, La Rioja (Spain); Jimenez, E. [Department of Electrical Engineering, University of La Rioja, Logrono, La Rioja (Spain)

2009-03-15

At the present moment in time, renewable energy sources have achieved great significance for modern day society. The main reason for this boom is the need to use alternative sources of energy to fossil fuels which are free of CO{sub 2} emissions and contamination. Among the current renewable energy sources, the growth of wind farms has been spectacular. Wind power uses the kinetic energy of the wind to produce a clean form of energy without producing contamination or emissions. The problem it raises is that of quantifying to what extent it is a totally clean form of energy. In this sense we have to consider not only the emissions produced while they are in operation, but also the contamination and environmental impact resulting from their manufacture and the future dismantling of the turbines when they come to the end of their working life. The aim of this study is to analyse the real impact that this technology has if we consider the whole life cycle. The application of the ISO 14040 standard [ISO. ISO 14040. Environmental management - life cycle assessment - principles and framework. Geneva, Switzerland: International Standard Organization; 1998.] allows us to make an LCA study quantifying the overall impact of a wind turbine and each of its components. Applying this methodology, the wind turbine is analysed during all the phases of its life cycle, from cradle to grave, with regard to the manufacture of its key components (through the incorporation of cut-off criteria), transport to the wind farm, subsequent installation, start-up, maintenance and final dismantling and stripping down into waste materials and their treatment. (author)

Impact assessment modelling of matter-less stressors in the context of Life Cycle Assessment

NARCIS (Netherlands)

Cucurachi, Stefano

2014-01-01

In the last three decades, the Life Cycle Assessment (LCA) framework has grown to establish itself as the leading tool for the assessment of the environmental impacts of product systems.LCA studies are now conducted globally both in and outside the academia and also used as a basis for policy

Assessment of quality of life among children with bronchial asthma ...

African Journals Online (AJOL)

Background: The global disease burden associated with bronchial asthma has continued to increase particularly among children. Asthma-related quality of life is a health related assessment of disease impact on patient and care givers. Aim: To determine the perceived quality of life (QOL) among children with bronchial ...

Relative likelihood for life as a function of cosmic time

Energy Technology Data Exchange (ETDEWEB)

Loeb, Abraham [Astronomy department, Harvard University, 60 Garden Street, Cambridge, MA 02138 (United States); Batista, Rafael A.; Sloan, David, E-mail: aloeb@cfa.harvard.edu, E-mail: rafael.alvesbatista@physics.ox.ac.uk, E-mail: david.sloan@physics.ox.ac.uk [Department of Physics - Astrophysics, University of Oxford, DWB, Keble Road, OX1 3RH, Oxford (United Kingdom)

2016-08-01

Is life most likely to emerge at the present cosmic time near a star like the Sun? We address this question by calculating the relative formation probability per unit time of habitable Earth-like planets within a fixed comoving volume of the Universe, dP ( t )/ dt , starting from the first stars and continuing to the distant cosmic future. We conservatively restrict our attention to the context of ''life as we know it'' and the standard cosmological model, ΛCDM . We find that unless habitability around low mass stars is suppressed, life is most likely to exist near ∼ 0.1 M {sub ⊙} stars ten trillion years from now. Spectroscopic searches for biosignatures in the atmospheres of transiting Earth-mass planets around low mass stars will determine whether present-day life is indeed premature or typical from a cosmic perspective.

Relative likelihood for life as a function of cosmic time

International Nuclear Information System (INIS)

Loeb, Abraham; Batista, Rafael A.; Sloan, David

2016-01-01

Is life most likely to emerge at the present cosmic time near a star like the Sun? We address this question by calculating the relative formation probability per unit time of habitable Earth-like planets within a fixed comoving volume of the Universe, dP ( t )/ dt , starting from the first stars and continuing to the distant cosmic future. We conservatively restrict our attention to the context of ''life as we know it'' and the standard cosmological model, ΛCDM . We find that unless habitability around low mass stars is suppressed, life is most likely to exist near ∼ 0.1 M ⊙ stars ten trillion years from now. Spectroscopic searches for biosignatures in the atmospheres of transiting Earth-mass planets around low mass stars will determine whether present-day life is indeed premature or typical from a cosmic perspective.

Time Perspective, Life Satisfaction and Social Comparison Orientation in University Students

OpenAIRE

Nazmiye ÇİVİTCİ; Hülya ŞAHİN BALTACI

2018-01-01

The aim of this study was to examine the predictive power of time perspective for the life satisfaction and social comparison in university students. The participants (n= 441; 321 female and 120 male) are undergraduate students at a state university. The data of the study were collected through the Zimbardo Time Perspective Inventory, The Satisfaction with Life Scale and IOWA-Netherlands Social Comparison Orientation Measure. In order to determine the prediction power of the time ...

Remaining life prediction of I and C cables for reliability assessment of NPP systems

International Nuclear Information System (INIS)

Santhosh, T.V.; Ghosh, A.K.; Fernandes, B.G.

2012-01-01

Highlights: ► A framework for time dependent reliability prediction of I and C cables for use in PSA of NPP has been developed using stress–strength interference theory. ► The proposed methodology has been illustrated with the accelerated thermal aging data on a typical XLPE cable. ► The behavior of insulation resistance when the degradation process is linear or exponential has also been modeled. ► The reliability index or probability of failure obtained from this approach can be used in system reliability evaluation to account for cable aging for PSA of NPP. - Abstract: Instrumentation and control (I and C) cables are one of the most important components in nuclear power plants (NPPs) because they provide power to safety-related equipment and also to transmit signals to and from various controllers to perform safety operations. I and C cables in NPP are subjected to a variety of aging and degradation stressors that can produce immediate degradation or aging-related mechanisms causing the degradation of cable components over time. Although, there exits several life estimation techniques, currently there is no any standard methodology or an approach toward estimating the time dependent reliability of I and C cables that can be directly used in probabilistic safety assessment (PSA) applications. Hence, the objective of this study is to develop an approach to estimate and confirm the continued acceptable margin in cable insulation life over time subjected to aging. This paper presents a framework based on the structural reliability theory to quantify the life time of I and C cable subjecting to thermal aging. Since cross-linked polyethylene (XLPE) cables are extensively being used in Indian NPPs, the remaining life time evaluations have been carried out for a typical XLPE cable. However, the methodology can be extended to other cables such as polyvinyl chloride (PVC), ethylene propylene rubber (EPR), etc.

Life cycle assessment: Existing building retrofit versus replacement

Science.gov (United States)

Darabi, Nura

The embodied energy in building materials constitutes a large part of the total energy required for any building (Thormark 2001, 429). In working to make buildings more energy efficient this needs to be considered. Integrating considerations about life cycle assessment for buildings and materials is one promising way to reduce the amount of energy consumption being used within the building sector and the environmental impacts associated with that energy. A life cycle assessment (LCA) model can be utilized to help evaluate the embodied energy in building materials in comparison to the buildings operational energy. This thesis takes into consideration the potential life cycle reductions in energy and CO2 emissions that can be made through an energy retrofit of an existing building verses demolition and replacement with a new energy efficient building. A 95,000 square foot institutional building built in the 1960`s was used as a case study for a building LCA, along with a calibrated energy model of the existing building created as part of a previous Masters of Building Science thesis. The chosen case study building was compared to 10 possible improvement options of either energy retrofit or replacement of the existing building with a higher energy performing building in order to see the life cycle relationship between embodied energy, operational energy, and C02 emissions. As a result of completing the LCA, it is shown under which scenarios building retrofit saves more energy over the lifespan of the building than replacement with new construction. It was calculated that energy retrofit of the chosen existing institutional building would reduce the amount of energy and C02 emissions associated with that building over its life span.

Karakteristik Life Time dan Efisiensi Modul Surya Berbasis Pewarna Menggunakan Interkoneksi Seri

Directory of Open Access Journals (Sweden)

Iqbal Febriana

2016-06-01

Full Text Available Sel surya berbasis pewarna atau yang dikenal dengan dye-sensitized solar cell (DSSC merupakan sel surya generasi baru yang bekerja berdasarkan photoelectrochemical. Proses absorpsi cahaya dilakukan oleh molekul pewarna (dye dan proses pemisahan muatan oleh bahan semikonduktor anorganik (dalam penelitian ini digunakan TiO2. Dalam penelitian ini dilakukan pabrikasi modul surya menggunakan lapisan partikel nano TiO2 (non-scattering dan menggunakan campuran lapisan partikel nano TiO2 dengan lapisan partikel sub-mikron TiO2 (scattering. Tujuan penelitian ini adalah untuk mengetahui waktu hidup (life time dan efisiensi modul surya dengan bahan yang berbeda. Pabrikasi modul surya ini menggunakan teknik screen printing. Karakteristik life time diperoleh dari hasil pengukuran I-V yang dilakukan secara manual menggunakan lampu LED 15 Watt dengan intensitas 40 mW/cm2 . Pengujian life time dilakukan selama 500 jam, dan hasilnya menunjukkan bahwa modul surya dengan lapisan scattering dapat mempengaruhi karakteristik life time namun efisiensi yang didapatkan kurang baik yaitu sebesar 0,31% sedangkan modul surya dengan lapisan non-scattering menunjukkan efisiensi yang baik yaitu sebesar 1,83% namun karakteristik life time yang kurang baik.

Site-dependent life-cycle impact assessment of acidification

DEFF Research Database (Denmark)

Potting, Josepha Maria Barbara; Schöpp, W.; Blok, Kornelis

1998-01-01

The lack of spatial differentiation in current life-cycle impact assessment (LCIA) affects the relevance of the assessed impact. This article first describes a framework for constructing factors relating the region of emission to the acidifying impact on its deposition areas. Next, these factors...... are established for 44 European regions with the help of the RAINS model, an integrated assessment model that combines information on regional emission levels with information on long-range atmospheric transport to estimate patterns of deposition and concentration for comparison with critical loads and thresholds...

Temporary Life Changes and the Timing of Divorce.

Science.gov (United States)

Fallesen, Peter; Breen, Richard

2016-10-01

Marriage is a risky undertaking that people enter with incomplete information about their partner and their future life circumstances. A large literature has shown how new information gained from unforeseen but long-lasting or permanent changes in life circumstances may trigger a divorce. We extend this literature by considering how information gained from a temporary change in life circumstances-in our case, a couple having a child with infantile colic-may affect divorce behavior. Although persistent life changes are known to induce divorce, we argue that a temporary stressful situation allows couples more quickly to discern the quality of their relationship, in some cases leading them to divorce sooner than they otherwise would have. We formalize this argument in a model of Bayesian updating and test it using data from Denmark. We find that the incidence of infantile colic shortens the time to divorce or disruption among couples who would have split up anyway.

The full size validation of remanent life assessment methods

International Nuclear Information System (INIS)

Hepworth, J.K.; Williams, J.A.

1988-03-01

A range of possible life assessment techniques for the remanent life appraisal of creeping structures is available in the published literature. However, due to the safety implications, the true conservatism of such methods cannot be assessed on operating plant. Consequently, the CEGB set up a four vessel programme in the Pressure Vessel Test Facility at the Marchwood Engineering Laboratories of the CEGB to underwrite and quantify the accuracy of these methods. The application of two non-destructive methods, namely strain monitoring and hardness measurement, to the data generated during about 12,000 hours of testing is examined. The current state of development of these methods is reviewed. Finally, the future CEGB programme relating to these vessels is discussed. (author)

ASSESSMENT OF QUALITY OF LIFE: PRESENT AND FUTURE METHODOLOGICAL CHALLENGES

Directory of Open Access Journals (Sweden)

Isabel Benítez

2016-01-01

Full Text Available The growing importance of quality of life in diverse domains, such as health, school performance and social participation, has led to the development of new conceptualisations and assessments of the construct. This diversity of perspectives brings about many benefits, but it also creates an obstacle for the formulation of a single unifying definition of the construct and, therefore, an agreed instrument or assessment framework. The aim of this study is to discuss the current methodological challenges in the measurement of quality of life. Firstly, we provide a brief description of the construct as defined in various areas, then we examine the new methodological developments and different applications. We also present an overview of the different possibilities for future developments in defining and measuring quality of life in national and international studies.

Pipeline integrity model-a formative approach towards reliability and life assessment

International Nuclear Information System (INIS)

Sayed, A.M.; Jaffery, M.A.

2005-01-01

Pipe forms an integral part of transmission medium in oil and gas industry. This holds true for both upstream and downstream segments of this global energy business. With the aging of this asset base, emphasis on its operational aspects has been under immense considerations from the operators and regulators sides. Moreover, the milieu of information area and enhancement in global trade has lifted the barriers on means to forge forward towards better utilization of resources. This has resulted in optimized solutions as priority for business and technical manager's world over. There is a paradigm shift from mere development of 'smart materials' to 'low life cycle cost material'. The force inducing this change is a rationale one: the recovery of development costs is no more a problem in a global community; rather it is the pay-off time which matters most to the materials end users. This means that decision makers are not evaluating just the price offered but are keen to judge the entire life cycle cost of a product. The integrity of pipe are affected by factors such as corrosion, fatigue-crack growth, stress-corrosion cracking, and mechanical damage. Extensive research in the area of reliability and life assessment has been carried out. A number of models concerning with the reliability issues of pipes have been developed and are being used by a number of pipeline operators worldwide. Yet, it is emphasised that there are no substitute for sound engineering judgment and allowance for factors of safety. The ability of a laid down pipe network to transport the intended fluid under pre-defined conditions for the entire project envisaged life, is referred to the reliability of system. The reliability is built into the product through extensive benchmarking against industry standard codes. The process of pipes construction for oil and gas service is regulated through American Petroleum Institute's Specification for Line Pipe. Subsequently, specific programs have been

Life cycle assessment of polysaccharide materials: a review

NARCIS (Netherlands)

Shen, L.|info:eu-repo/dai/nl/310872022; Patel, M.K.|info:eu-repo/dai/nl/18988097X

2008-01-01

Apart from conventional uses of polysaccharide materials, such as food, clothing, paper packaging and construction, new polysaccharide products and materials have been developed. This paper reviews life cycle assessment (LCA) studies in order to gain insight of the environmental profiles of

Transportation Life Cycle Assessment (LCA) Synthesis, Phase II

Science.gov (United States)

2018-04-24

The Transportation Life Cycle Assessment (LCA) Synthesis includes an LCA Learning Module Series, case studies, and analytics on the use of the modules. The module series is a set of narrated slideshows on topics related to environmental LCA. Phase I ...

Life cycle assessment in wastewater treatment: : Influence of site-oriented normalization factors, life cycle impact assessment methods, and weighting methods

NARCIS (Netherlands)

Bai, Shunwen; Wang, Xiuheng; Zhang, X.; Zhao, Xinyue; Ren, N

2017-01-01

This present study aims to analyze the differences in results of different site-directional life cycle assessment
(LCA) methods applied in the field of wastewater treatment. Site-generic methods were employed and
compared with China-specific methods on a full-scale wastewater treatment case.

What are the elements required to improve exposure estimates in life cycle assessments?

DEFF Research Database (Denmark)

Ernstoff, Alexi; Rosenbaum, Ralph K.; Margni, Manuele

2016-01-01

human toxicity and ecosystem toxicity of chemicals posed by different product life cycle stages are characterized in the life cycle impact assessment (LCIA) phase. Exposure and effect quantification as part of LCIA toxicity characterization faces numerous challenges related to inventory analysis (e.......g. number and quantity of chemicals emitted), substance-specific modelling (e.g. organics, inorganics, nano-materials) in various environments and time horizons, human and ecosystem exposure quantification (e.g. exposed organisms and exposure pathways), and toxicity end-points (e.g. carcinogenicity...... chemical exposure and harmful effects. Thereby, we structure this study of key elements identified as areas of elevated public, industrial, regulatory, and scientific concerns. We found the majority of missing elements are directly related to the definition of exposed populations (both ecosystems...

Symposium on extension of life time of atomic energy facilities

International Nuclear Information System (INIS)

1987-01-01

This symposium was held on November 18, 1987 in University of Tokyo under the sponsorship of Japan Welding Engineering Society. The papers were presented on the various problems on the examination of the extension of life time and the deterioration with the lapse of years of nuclear power plants, the data of corrosion fatigue strength in high temperature water and the controlling factors, the trend of the research on corrosion fatigue crack development in high temperature, high pressure water and future problems, long life corrosion fatigue characteristics and the method of estimating remaining life, the trend of the research on the neutron irradiation embrittlement of pressure vessels, the results of the property confirmation test on the strain aging of reactor pressure vessel materials, the evaluation of life time by probabilistic fracture mechanics, the radiation deterioration of electric wire coating and insulation materials, the deterioration of concrete structures with the lapse of years, and the detection of the deterioration with the lapse of years. (K.I.)

Differences between leisure-time physical activity, health-related quality of life and life satisfaction: Al Ritmo de las Comunidades, a natural experiment from Colombia.

Science.gov (United States)

Barradas, Susana C; Finck Barboza, Carolyn; Sarmiento, Olga L

2017-08-01

Physical inactivity is one of the major public health problems worldwide. Community-based interventions have been pointed out as a promising strategy to increase physical activity (PA) levels and impact population health. Recreovía is a community program with a potential to promote PA. There is growing evidence for two benefits derived from the practice of PA: an increased perception of health-related quality of life (HRQoL) and life satisfaction (LS). The purpose of this study was to assess differences between leisure-time PA and perceptions of both HRQoL and LS, as well as to assess differences between perceptions of both HRQoL and LS for Recreovía and non-Recreovía participants. Data were obtained using the baseline cross-sectional survey of 1533 participants (501 belonged to the intervention group) as part of the natural experiment Al Ritmo de las Comunidades. HRQoL was measured with the European Organization for Research and Treatment of Cancer 30-item questionnaire, LS was measured with Questions on Life Satisfaction Scale, and self-reported minutes of leisure-time PA were measured with the long version of the International Physical Activity Questionnaire. The mean age of participants was 41.7 years (standard deviation (SD) = 16.3). The participants had a good overall HRQoL and LS. The mean minutes of leisure-time PA were 158.1 min (SD = 230.2) a week. Results showed that those participants who reported higher leisure-time PA levels also reported a significantly higher LS (M = 41.9, SD = 35.0) relative to participants with lower levels (M = 37.6, SD = 34.2, t(1532) = -2.36, p < 0.01). There were no statistical differences in the perception of HRQoL and leisure-time PA ( t(1532) = -1.03, p = 0.30), although active people had higher scores. Both HRQoL and LS scores were higher in individuals who were participating in Recreovía ( p < 0.001). Higher LS scores were found in the group with higher leisure-time PA, while HRQoL showed no differences. Better

Work-life balance, time and money: identifying the work-life balance priorities of working class workers

OpenAIRE

Warren, Tracey

2017-01-01

This chapter provides an overview of the relative roles played by time and money in debates around work-life balance. It shows how time trumps money in dominant understandings of what ‘work-life’ means and in what parts of our lives are presumed to be in need of balance. Working ‘too many’ hours is seen to be the major challenge for achieving a work-life balance. This is an incomplete account. It is largely about the work-lives of the middle classes and it neglects the priorities of working c...

Integrated manure utilization system life-cycle value assessment

Energy Technology Data Exchange (ETDEWEB)

Row, J.; Neabel, D. [Pembina Inst. for Appropriate Development, Drayton Valley, AB (Canada)

2005-10-15

A life-cycle assessment of the Alberta Research Council (ARC) and Highmark Renewables' development of an integrated manure utilization system (IMUS) were presented. The assessment focused on an evaluation of factors of primary importance to government, investors and the livestock industry. IMUS technology uses manure as a resource to produce electricity, heat, bio-based fertilizer and reusable water. Results of the assessment indicated that IMUS plants have the potential to be financially viable if a power purchase of $90 MWh on average can be purchased from a 30,000 head livestock operation. A capital cost of under $11 million is necessary, and an established biofertilizer price of $50 per tonne should be established. An IMUS plant was estimated to reduce life-cycle greenhouse gas emissions by 70 to 80 per cent when compared to land spreading. Reductions are accomplished through displacing electricity from the provincial grid and reducing nitrous oxide (N{sub 2}O) emissions from spreading of manure The IMUS plants lessen environment impacts by reducing the extraction and consumption of non-renewable resources, and by displacing an estimated 11,700 GJ of coal and natural gas per 1000 head of cattle per year. In addition, various pathogens within manure are eliminated. The plants have the potential to eliminate the environmental hazards associated with the disposal of deadstock. The systems reduce manure odour, lessen truck traffic and are expected to contribute to rural economic diversification. Barriers to further implementation of IMUS were discussed, as well as emerging opportunities for IMUS developers. It was concluded that the initial assessments of the IMUS were positive. Further investigation is needed to determine actual life-cycle performance of the operations. 18 refs., 3 tabs., 3 figs.

Time, Interaction, and Design in Support of a Good Life

DEFF Research Database (Denmark)

Froes, Isabel Cristina G.; Laaksolahti, Jarmo Matti; Witzner Hansen, Dan

development. Our ongoing investigation of Interaction Design for a Good Life (http://itu.dk/IxDLab/) has uncovered a broad diversity of perspectives on how to unpack ‘a good life’ through research and design, and indeed what constitutes a good life to begin with. Through our investigations, time has surfaced...... as pivotal to our budding understanding of elements of a good life and a useful framing for future investigations. Time is also an important topic for interaction design, because it is at the core of interaction, the practice of design, and, in many ways, our use and relationships with technological......This position paper outlines a research program for the IxD Research Group at the IT University of Copenhagen. As such, it presents a range of questions addressing different corners of the question of time in IxD from the point of view of HCI, social interaction, material expressions, and software...

Spatially explicit characterization of acidifying and eutrophying air pollution in life-cycle assessment

NARCIS (Netherlands)

Huijbregts, Mark A J; Schöpp, Wolfgang; Verkuijlen, Evert; Heijungs, Reinout; Reijnders, Lucas

2001-01-01

Simple models are often used to assess the potential impact of acidifying and eutrophying substances released during the life cycle of products. As fate, background depositions, and ecosystem sensitivity are not included in these models, environmental life-cycle assessment of products (LCA) may

Life Cycle Assessment of Daugavgriva Waste Water Treatment Plant

OpenAIRE

Romagnoli, F; Fraga Sampaio, F; Blumberga, D

2009-01-01

This paper presents the assessment of the environmental impacts caused by the treatment of Riga’s waste water in the Daugavgriva plant with biogas energy cogeneration through the life cycle assessment (LCA). The LCA seems to be a good tool to assess and evaluate the most serious environmental impacts of a facility The results showed clearly that the impact category contributing the most to the total impact –eutrophicationcomes from the wastewater treatment stage. Cl...

Development and application of basis database for materials life cycle assessment in china

Science.gov (United States)

Li, Xiaoqing; Gong, Xianzheng; Liu, Yu

2017-03-01

As the data intensive method, high quality environmental burden data is an important premise of carrying out materials life cycle assessment (MLCA), and the reliability of data directly influences the reliability of the assessment results and its application performance. Therefore, building Chinese MLCA database is the basic data needs and technical supports for carrying out and improving LCA practice. Firstly, some new progress on database which related to materials life cycle assessment research and development are introduced. Secondly, according to requirement of ISO 14040 series standards, the database framework and main datasets of the materials life cycle assessment are studied. Thirdly, MLCA data platform based on big data is developed. Finally, the future research works were proposed and discussed.

Life cycle management and assessment: approaches and visions towards sustainable manufacturing

DEFF Research Database (Denmark)

Westkämper, Engelbert; Alting, Leo; Arndt, Günther

2000-01-01

. The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows the existing approaches of LCM and discusses their prospects and further development....... concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole and optimizes the interaction of product design, manufacturing and life cycle activities...

Assessing basic life support skills without an instructor: is it possible?

Directory of Open Access Journals (Sweden)

Mpotos Nicolas

2012-07-01

Full Text Available Abstract Background Current methods to assess Basic Life Support skills (BLS; chest compressions and ventilations require the presence of an instructor. This is time-consuming and comports instructor bias. Since BLS skills testing is a routine activity, it is potentially suitable for automation. We developed a fully automated BLS testing station without instructor by using innovative software linked to a training manikin. The goal of our study was to investigate the feasibility of adequate testing (effectiveness within the shortest period of time (efficiency. Methods As part of a randomised controlled trial investigating different compression depth training strategies, 184 medicine students received an individual appointment for a retention test six months after training. An interactive FlashTM (Adobe Systems Inc., USA user interface was developed, to guide the students through the testing procedure after login, while Skills StationTM software (Laerdal Medical, Norway automatically recorded compressions and ventilations and their duration (“time on task”. In a subgroup of 29 students the room entrance and exit time was registered to assess efficiency. To obtain a qualitative insight of the effectiveness, student’s perceptions about the instructional organisation and about the usability of the fully automated testing station were surveyed. Results During testing there was incomplete data registration in two students and one student performed compressions only. The average time on task for the remaining 181 students was three minutes (SD 0.5. In the subgroup, the average overall time spent in the testing station was 7.5 minutes (SD 1.4. Mean scores were 5.3/6 (SD 0.5, range 4.0-6.0 for instructional organisation and 5.0/6 (SD 0.61, range 3.1-6.0 for usability. Students highly appreciated the automated testing procedure. Conclusions Our automated testing station was an effective and efficient method to assess BLS skills in medicine students

Assessing Water Risks in the Mining Industry using Life Cycle Assessment Based Approaches

OpenAIRE

STEPHEN ALAN NORTHEY

2018-01-01

Recent advances life cycle assessment methodology provide an opportunity to gain a more holistic understanding of how the mining industry interacts with water resources. A detailed review of assessment methodology and water management in the mining industry was undertaken to identify research needs. Global datasets of water use statistics for mining operations were also developed, and an exhaustive analysis of how global mineral resources and production are spatially distributed across local ...

Life Cycle Assessment in the Cereal and Derived Products Sector

DEFF Research Database (Denmark)

Renzulli, Pietro A.; Bacenetti, Jacopo; Benedetto, Graziella

2015-01-01

environmental improvement in such systems. Following a brief introduction to the cereal sector and supply chain, this chapter reviews some of the current cereal-based life cycle thinking literature, with a particular emphasis on LCA. Next, an analysis of the LCA methodological issues emerging from......This chapter discusses the application of life cycle assessment methodologies to rice, wheat, corn and some of their derived products. Cereal product systems are vital for the production of commodities of worldwide importance that entail particular environmental hot spots originating from...... their widespread use and from their particular nature. It is thus important for tools such as life cycle assessment (LCA) to be tailored to such cereal systems in order to be used as a means of identifying the negative environmental effects of cereal products and highlighting possible pathways to overall...

Indicators for human toxicity in Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Krewitt, Wolfram; Pennington, David W.; Olsen, Stig Irving

2002-01-01

The main objectives of this task group under SETAC-Europe’s Second Working Group on Life Cycle Impact Assessment (LCIA-WIA2) were to identify and discuss the suitability of toxicological impact measures for human health for use in characterization in LCIA. The current state of the art of defining......, as well as potency. Quantitative severity-based indicators yield measures in terms of Years of Life Lost (YOLL), Disability Adjusted Life Years (DALY), Quality Adjusted Life Years (QALY) and other similar measures. DALYs and QALYs are examples of approaches that attempt to account for both years of life...... such as No Observed Effect Levels (NOEL). NOELs, and similar data, are determined in laboratory studies using rodents and are then extrapolated to more relevant human measures. Many examples also exist of measures and methods beyond potency-based indicators that attempt to account for differences in expected severity...

Material aging and degradation detection and remaining life assessment for plant life management

International Nuclear Information System (INIS)

Ramuhalli, P.; Henager, C.H. Jr.; Griffin, J.W.; Meyer, R.M.; Coble, J.B.; Pitman, S.G.; Bond, L.J.

2012-01-01

One of the major factors that may impact long-term operations is structural material degradation. Detecting materials degradation, estimating the remaining useful life (RUL) of the component, and determining approaches to mitigating the degradation are important from the perspective of long-term operations. In this study, multiple nondestructive measurement and monitoring methods were evaluated for their ability to assess the material degradation state. Metrics quantifying the level of damage from these measurements were defined and evaluated for their ability to provide estimates of remaining life of the component. An example of estimating the RUL from nondestructive measurements of material degradation condition is provided. (author)

Life Cycle Assessment of fresh dairy packaging at ELOPAK

OpenAIRE

Ruttenborg, Vegard

2017-01-01

Nearly all food and drink products require some packaging, and the impact from production and consumption is causing a strain on the environment. To counteract the bad effects, business is emphasizing the environmental performance of products and therefore utilising Life Cycle Assessment as a tool to quantify the environmental impacts from a products life cycle. Elopak, which is an International supplier of paper-based packaging for liquid food, is a such company. This thesis i...

Kozloduy NPP units 3 and 4 rest life time program execution

International Nuclear Information System (INIS)

Genov, S.

2005-01-01

In this paper the following tasks are considered: Kozloduy NPP units 3 and 4 life time evaluation; programme for the units life time assuring; units 3 and 4 renewals. The main activities for the programme implementation are described and the obtained results are presented. In conclusion, the executed activities of program for assuring the life time of units 3 and 4 of Kozloduy NPP, cogently prove that the lifetime of structures, systems and components, is assured duly and those structures, systems and components will be in service safely, economically effectively and mostly reliable till the end of the 30 years design lifetime. For some of them it has been proved even for 35 and 40 years. Program activities continue during 2005, although the early shutdown of units 3 and 4 is possible

TIMELY DELIVERY OF LASER INERTIAL FUSION ENERGY (LIFE)

Energy Technology Data Exchange (ETDEWEB)

Dunne, A M

2010-11-30

The National Ignition Facility (NIF), the world's largest and most energetic laser system, is now operational at Lawrence Livermore National Laboratory. A key goal of the NIF is to demonstrate fusion ignition for the first time in the laboratory. Its flexibility allows multiple target designs (both indirect and direct drive) to be fielded, offering substantial scope for optimization of a robust target design. In this paper we discuss an approach to generating gigawatt levels of electrical power from a laser-driven source of fusion neutrons based on these demonstration experiments. This 'LIFE' concept enables rapid time-to-market for a commercial power plant, assuming success with ignition and a technology demonstration program that links directly to a facility design and construction project. The LIFE design makes use of recent advances in diode-pumped, solid-state laser technology. It adopts the paradigm of Line Replaceable Units utilized on the NIF to provide high levels of availability and maintainability and mitigate the need for advanced materials development. A demonstration LIFE plant based on these design principles is described, along with the areas of technology development required prior to plant construction. A goal-oriented, evidence-based approach has been proposed to allow LIFE power plant rollout on a time scale that meets policy imperatives and is consistent with utility planning horizons. The system-level delivery builds from our prior national investment over many decades and makes full use of the distributed capability in laser technology, the ubiquity of semiconductor diodes, high volume manufacturing markets, and U.S. capability in fusion science and nuclear engineering. The LIFE approach is based on the ignition evidence emerging from NIF and adopts a line-replaceable unit approach to ensure high plant availability and to allow evolution from available technologies and materials. Utilization of a proven physics platform for the

Development of Comparative Toxicity Potentials of TiO2 Nanoparticles for Use in Life Cycle Assessment

DEFF Research Database (Denmark)

Ettrup, Kim; Kounina, Anna; Hansen, Steffen Foss

2017-01-01

for TiO2 nanoparticles (TiO2-NP) for use in LCA. We adapted the USEtox 2.0 consensus model to integrate the SimpleBox4Nano fate model, and we populated the resulting model with TiO2-NP specific data. We thus calculated CTP values for TiO2 nanoparticles for air, water, and soil emission compartments...... in earlier studies. Assumptions, which were performed in those previous studies because of lack of data and knowledge at the time they were made, primarily explain such discrepancies. For future assessment of potential toxic impacts of TiO2 nanoparticles in LCA studies, we therefore recommend the use of our......Studies have shown that releases of nanoparticles may take place through the life cycle of products embedding nanomaterials, thus resulting in potential impacts on ecosystems and human health. While several life cycle assessment (LCA) studies have assessed such products, only a few of them have...

Environmental Life Cycle Assessment of long-term organic rice production in a Subtropical area of China

DEFF Research Database (Denmark)

Xueqing, He; Qiao, Yuhui; Liang, Long

2018-01-01

a considerable environmental impact and changing from conventional to organic rice cultivation might therefore have a potentially great impact. Meanwhile, it takes time for the organic farming systems to reach a new steady state after conversion to organic. Thus, the environmental profile of the organic products...... will change over time and it is therefore important to examine whether the difference to conventional will be reduced (and disappear) or be increased over time. The aim of the present study was therefore to assess the environmental impact of organic rice production 5 (OR5), 10 (OR10) and 15 (OR15) years since...... conversion and compare it to conventional rice (CR) in subtropical China. The life cycle assessment (LCA) method was used to assess environmental impact of rice production systems with regard to nine environmental impact categories: Non-renewable Energy Depletion (NED), Water Depletion (WD), Land Occupation...

Self- and parental assessment of quality of life in child cochlear implant bearers.

Science.gov (United States)

Razafimahefa-Raoelina, T; Farinetti, A; Nicollas, R; Triglia, J-M; Roman, S; Anderson, L

2016-02-01

The aim of this study was to assess quality of life in children fitted with cochlear implants, using combined self- and parental assessment. Thirty-two children, aged 6 to 17 years, with prelingual hearing loss and receiving cochlear implants at a mean age of 22 months, were included along with their families. The KIDSCREEN-27 questionnaire was implemented, in face-to-face interview, in its parents and children-adolescents versions, with 27 items covering physical well-being ("physical activities and health"), psychological well-being ("general mood and feelings about yourself"), autonomy & parents ("family and free time"), peers & social support ("friends") and school environment ("school and learning"). Parent and child responses were compared with a general population database, and pairwise. Global scores were compared against the general population on Cohen d effect-size. For child self-assessment, the results were: physical well-being, 72.81 (d=0); psychological well-being, 78.13 (d=-0.4); autonomy & parents, 63.84 (d=-0.2); peers & social support, 61.72 (d=-0.4); and school environment 73.83 (d=0). For parent assessment, the respective results were 62.66 (d=-0.8), 74.89 (d=-0.3), 57.37 (d=-1.2), 51.56 (d=-0.8), and 68.95 (d=-0.4). Half of the children could not answer the questionnaire, mainly due to associated disability. Schooling and language performance were poorer in non-respondent than respondent children. Quality of life was comparable between implanted and non-implanted children: Cohen d, 0 to 0.4. Early cochlear implantation in children with pre-lingual hearting loss provides quality of life comparable to that of the general population. Copyright © 2015. Published by Elsevier Masson SAS.

Using questionnaires to assess the quality of life and multidimensionality of fibromyalgia patients.

Science.gov (United States)

Martins, Marielza Regina Ismael; Polvero, Letícia Oliveira; Rocha, Carlos Eduardo; Foss, Marcos Henrique; Santos Junior, Randolfo Dos

2012-01-01

Fibromyalgia syndrome (FMS) is a painful condition of unknown etiology, highly prevalent, and associated with other conditions, which causes great impact on daily life and quality of life. To assess, due to the multifactorial character of the FMS, the discriminating power of instruments used to identify good indicators of self-assessment and self-knowledge. This is a descriptive, exploratory, comparative, cross-sectional study with quantitative approach, and sample comprising a treatment group (T), diagnosed with FMS (n = 63) and a control group (C), undergoing interconsultation at the Pain Outpatient Clinic (n = 75). The following instruments were used: Fibromyalgia Impact Questionnaire (FIQ); visual analogue scale (VAS); McGill Pain Questionnaire; and the Post-Sleep Inventory (PSI). To evaluate the quality of life, Medical Outcomes Study 12-item Short-Form Health Survey (SF-12) was used. In the two groups, female gender predominated. The mean age of the sample was 42.3 ± 4.3 years, 45% were married, and the average schooling was 8 ± 3.5 years. The mean duration of pain was 3.2 years, and a mean time of two years were required for the clinical diagnosis of FMS in group T. Group T had higher levels of pain, anxiety, and depression, worse quality of sleep, less flexibility, and worse quality of life, although some of these symptoms were also present in group C. All instruments had good discriminating power (P < 0.05), especially FIQ, VAS and PSI, whose areas under the ROC curve were greater.

Life Cycle Assessment Of Hydrogen Production From Natural Gas Reforming Process

International Nuclear Information System (INIS)

Ozturk, M.

2010-01-01

Society has become concerned about the issues of natural resource depletion and environmental degradation. The environmental performance of products or processes has become a key issue, which is why ways to minimize the effects on the environment are investigated. The most effective tool for this purpose is called life cycle assessment (LCA). This concept considers the entire life cycle of product or process. The life cycle of a product begins with the extraction of raw materials from the earth to create the product and ends at the point when all materials are returned to the earth. LCA makes it possible to estimate the cumulative environmental impacts resulting from all stages in the product life cycle, often including impacts not considered in more traditional analyses. Therefore, LCA provides a comprehensive view of the environmental aspects of the product or process and a more accurate picture of the true environmental trade-offs in product selection. In the case of this study, life cycle assessments of hydrogen production via natural gas reforming process are investigated for environmental affect.

Assessment of anxiety and quality of life in fibromyalgia patients

Directory of Open Access Journals (Sweden)

Tathiana Pagano

Full Text Available CONTEXT: Fibromyalgia is a syndrome characterized by chronic, diffuse musculoskeletal pain, and by a low pain threshold at specific anatomical points. The syndrome is associated with other symptoms such as fatigue, sleep disturbance, morning stiffness and anxiety. Because of its chronic nature, it often has a negative impact on patients' quality of life. OBJECTIVE: To assess the quality of life and anxiety level of patients with fibromyalgia. TYPE Of STUDY: Cross-sectional. SETTING: Rheumatology outpatient service of Hospital das Clínicas (Medical School, Universidade de São Paulo. METHODS: This study evaluated 80 individuals, divided between test and control groups. The test group included 40 women with a confirmed diagnosis of fibromyalgia. The control group was composed of 40 healthy women. Three questionnaires were used: two to assess quality of life (FIQ and SF-36 and one to assess anxiety (STAI. They were applied to the individuals in both groups in a single face-to-face interview. The statistical analysis used Student's t test and Pearson's correlation test (r, with a significance level of 95%. Also, the Pearson chi-squared statistics test for homogeneity, with Yates correction, was used for comparing schooling between test and control groups. RESULTS: There was a statistically significant difference between the groups (p = 0.000, thus indicating that fibromyalgia patients have a worse quality of life and higher levels of anxiety. The correlations between the three questionnaires were high (r = 0.9. DISCUSSION: This study has confirmed the efficacy of FIQ for evaluating the impact of fibromyalgia on the quality of life. SF-36 is less specific than FIQ, although statistically significant values were obtained when analyzed separately, STAI showed lower efficacy for discriminating the test group from the control group. The test group showed worse quality of life than did the control group, which was demonstrated by both FIQ and SF-36. Even

Life cycle management and assessment: approaches and visions towards sustainable manufacturing

DEFF Research Database (Denmark)

Westkämper, Engelbert; Alting, Leo; Arndt, Günther

2001-01-01

and optimizes the interaction of product design, manufacturing and life cycle activities. The goal of this approach is to protect resources and maximize effectiveness by means of life cycle assessment, product data management, technical support and, last but not least, life cycle costing. This paper shows....... Economically successful business areas can also be explored. Whether new service concepts are required, new regulations have been passed or consumer values are changing, the differences between business areas are disappearing. Life cycle management (LCM) considers the product life cycle as a whole...... the existing approaches of LCM and discusses their prospects and further development....

Seed after-ripening and dormancy determine adult life history independently of germination timing.

Science.gov (United States)

de Casas, Rafael Rubio; Kovach, Katherine; Dittmar, Emily; Barua, Deepak; Barco, Brenden; Donohue, Kathleen

2012-05-01

• Seed dormancy can affect life history through its effects on germination time. Here, we investigate its influence on life history beyond the timing of germination. • We used the response of Arabidopsis thaliana to chilling at the germination and flowering stages to test the following: how seed dormancy affects germination responses to the environment; whether variation in dormancy affects adult phenology independently of germination time; and whether environmental cues experienced by dormant seeds have an effect on adult life history. • Dormancy conditioned the germination response to low temperatures, such that prolonged periods of chilling induced dormancy in nondormant seeds, but stimulated germination in dormant seeds. The alleviation of dormancy through after-ripening was associated with earlier flowering, independent of germination date. Experimental dormancy manipulations showed that prolonged chilling at the seed stage always induced earlier flowering, regardless of seed dormancy. Surprisingly, this effect of seed chilling on flowering time was observed even when low temperatures did not induce germination. • In summary, seed dormancy influences flowering time and hence life history independent of its effects on germination timing. We conclude that the seed stage has a pronounced effect on life history, the influence of which goes well beyond the timing of germination. © 2012 The Authors. New Phytologist © 2012 New Phytologist Trust.

Managing Time-Based Conflict Across Life Domains In Nigeria: A ...

African Journals Online (AJOL)

Managing Time-Based Conflict Across Life Domains In Nigeria: A Decision Making Perspective. ... which employees in a developing country attempt to resolve time-based conflict between work, family and other activities. A decision making ...

Assessment and Stability of Early Learning Abilities in Preterm and Full-Term Infants across the First Two Years of Life

Science.gov (United States)

Lobo, Michele A.; Galloway, James C.

2013-01-01

Infants born preterm have increased risk for learning disabilities yet we lack assessments to successfully detect these disabilities in early life. We followed 23 full-term and 29 preterm infants from birth through 24 months to assess for differences in and stability of learning abilities across time. Measures included the Bayley-III cognitive…

Life cycle assessment of construction and demolition waste management.

Science.gov (United States)

Butera, Stefania; Christensen, Thomas H; Astrup, Thomas F

2015-10-01

Life cycle assessment (LCA) modelling of construction and demolition waste (C&DW) management was carried out. The functional unit was management of 1 Mg mineral, source separated C&DW, which is either utilised in road construction as a substitute for natural aggregates, or landfilled. The assessed environmental impacts included both non-toxic and toxic impact categories. The scenarios comprised all stages of the end-of-life management of C&DW, until final disposal of all residues. Leaching of inorganic contaminants was included, as was the production of natural aggregates, which was avoided because of the use of C&DW. Typical uncertainties related to contaminant leaching were addressed. For most impact categories, utilisation of C&DW in road construction was preferable to landfilling; however, for most categories, utilisation resulted in net environmental burdens. Transportation represented the most important contribution for most nontoxic impacts, accounting for 60-95 per cent of these impacts. Capital goods contributed with negligible impacts. Leaching played a critical role for the toxic categories, where landfilling had lower impacts than utilisation because of the lower levels of leachate per ton of C&DW reaching the groundwater over a 100-year perspective. Leaching of oxyanions (As, V and Sb) was critical with respect to leaching. Typical experimental uncertainties in leaching data did not have a pivotal influence on the results; however, accounting for Cr immobilisation in soils as part of the impact assessment was critical for modelling the leaching impacts. Compared with the overall life cycle of building and construction materials, leaching emissions were shown to be potentially significant for toxicity impacts, compared with contributions from production of the same materials, showing that end-of-life impacts and leaching should not be disregarded when assessing environmental impacts from construction products and materials. CO2 uptake in the C

Associations of sedentary time and patterns of sedentary time accumulation with health-related quality of life in colorectal cancer survivors

Directory of Open Access Journals (Sweden)

Eline H. van Roekel

2016-12-01

Full Text Available Sedentary behavior (sitting/lying at low energy expenditure while awake is emerging as an important risk factor that may compromise the health-related quality of life (HRQoL of colorectal cancer (CRC survivors. We examined associations of sedentary time with HRQoL in CRC survivors, 2–10 years post-diagnosis. In a cross-sectional study, stage I–III CRC survivors (n = 145 diagnosed (2002−2010 at Maastricht University Medical Center+, the Netherlands, wore the thigh-mounted MOX activity monitor 24 h/day for seven consecutive days. HRQoL outcomes were assessed by validated questionnaires (EORTC QLQ-C30, WHODAS II, Checklist Individual Strength, and Hospital Anxiety and Depression Scale. Confounder-adjusted linear regression models were used to estimate associations with HRQoL outcomes of MOX-derived total and prolonged sedentary time (in prolonged sedentary bouts ≥30 min, and usual sedentary bout duration, corrected for waking wear time. On average, participants spent 10.2 h/day sedentary (SD, 1.6, and 4.5 h/day in prolonged sedentary time (2.3. Mean usual sedentary bout duration was 27.3 min (SD, 16.8. Greater total and prolonged sedentary time, and longer usual sedentary bout duration were associated with significantly (P < 0.05 lower physical functioning, and higher disability and fatigue scores. Greater prolonged sedentary time and longer usual sedentary bout duration also showed significant associations with lower global quality of life and role functioning. Associations with distress and social functioning were non-significant. Sedentary time was cross-sectionally associated with poorer HRQoL outcomes in CRC survivors. Prospective studies are needed to investigate whether sedentary time reduction is a potential target for lifestyle interventions aiming to improve the HRQoL of CRC survivors.

Challenges in implementing a Planetary Boundaries based Life-Cycle Impact Assessment methodology

DEFF Research Database (Denmark)

Ryberg, Morten; Owsianiak, Mikolaj; Richardson, Katherine

2016-01-01

of resolving the challenges and developing such methodology is discussed. The challenges are related to technical issues, i.e., modelling and including the Earth System processes and their control variables as impact categories in Life-Cycle Impact Assessment and to theoretical considerations with respect...... to the interpretation and use of Life-Cycle Assessment results in accordance with the Planetary Boundary framework. The identified challenges require additional research before a Planetary Boundaries based Life-Cycle Impact Assessment method can be developed. Research on modelling the impacts on Earth System processes......Impacts on the environment from human activities are now threatening to exceed thresholds for central Earth System processes, potentially moving the Earth System out of the Holocene state. To avoid such consequences, the concept of Planetary Boundaries was defined in 2009, and updated in 2015...

Developing and testing an operational framework for assessing quality of life

International Nuclear Information System (INIS)

Fahy, F.; O Cinneide, M.

2008-01-01

Difficulties with operationalising the concept of sustainable development have generated much debate, and have stimulated a good deal of research on the challenging task of assessing progress towards that goal. This paper focuses on quality of life, as one discourse in the sustainable development literature, and reports on the development and testing of an operational framework for the assessment of quality of life in an urban setting. Core principles of sustainable development are translated into a set of operational criteria for investigating quality of life. The process of formulating these criteria and the manner in which they may be linked to policy and practice are outlined. The application of the framework is demonstrated by reference to the experience of implementing it in an urban centre in Ireland

Life cycle assessment and the agri-food chain

DEFF Research Database (Denmark)

Hermansen, John Erik; Nguyen, T Lan T

2012-01-01

Our food consumption is responsible for a major part of the environmental impact related to our total consumption. Life cycle assessment (LCA) is a product-oriented tool that can be used efficiently to identify improvement options within the food chain covering a product’s life cycle from cradle...... to grave, which is very complex for many foods, and to support choices of consumption. The LCA methodology is supported by public standards and public policy measures and has proved its value in business development for more environmentally friendly products. It is an essential feature that the effects...... of resource use and emissions associated with a product’s life cycle can be aggregated into impact categories (e.g., nonrenewable energy use, land occupation, global warming, acidification, etc.) and further aggregated into overall damage impacts (e.g., impacts on biodiversity, human health, and resource...

Integrating Life-cycle Assessment into Transport Cost-benefit Analysis

DEFF Research Database (Denmark)

Manzo, Stefano; Salling, Kim Bang

2016-01-01

Traditional transport Cost-Benefit Analysis (CBA) commonly ignores the indirect environmental impacts of an infrastructure project deriving from the overall life-cycle of the different project components. Such indirect impacts are instead of key importance in order to assess the long......-term sustainability of a transport infrastructure project. In the present study we suggest to overcome this limit by combining a conventional life-cycle assessment approach with standard transport cost-benefit analysis. The suggested methodology is tested upon a case study project related to the construction of a new...... fixed link across the Roskilde fjord in Frederikssund (Denmark). The results are then compared with those from a standard CBA framework. The analysis shows that indirect environmental impacts represent a relevant share of the estimated costs of the project, clearly affecting the final project evaluation...

An assessment of corrosion life of copper overpack

International Nuclear Information System (INIS)

Honda, A.; Taniguchi, N.

1999-08-01

Corrosion life of copper overpack is estimated on the basis of current understandings of copper corrosion processes. The assessment is based on the mass balance. Oxygen and sulfide were taken into account as corrosive species. The sulfate existing in bentonite is assumed to be reduced to sulfide by sulfate reducing bacteria and corrodes copper overpacks. Pitting is involved in the assesment using two methods. One method is use of pitting factor acquired from analysis of archeological artifacts. The other is use of extreme value statistical technique. The time evolution of parameters for cumulative probability distribution function, Gumbel distribution, was estimated using the data from copper specimens buried in various soil and archeological artifacts of the bronze age. The pitting depth for 1000 years is estimated using the parameters for probability distribution function. The result of estimation shows 39-mm is the maximum penetration for 1000 years. Natural analogue data suggest the corrosion rate of 3 mm/1000 years. Therefore the estimation is considered to be conservative. (author)

Shelf Life of Food Products: From Open Labeling to Real-Time Measurements.

Science.gov (United States)

Corradini, Maria G

2018-03-25

The labels currently used on food and beverage products only provide consumers with a rough guide to their expected shelf lives because they assume that a product only experiences a limited range of predefined handling and storage conditions. These static labels do not take into consideration conditions that might shorten a product's shelf life (such as temperature abuse), which can lead to problems associated with food safety and waste. Advances in shelf-life estimation have the potential to improve the safety, reliability, and sustainability of the food supply. Selection of appropriate kinetic models and data-analysis techniques is essential to predict shelf life, to account for variability in environmental conditions, and to allow real-time monitoring. Novel analytical tools to determine safety and quality attributes in situ coupled with modern tracking technologies and appropriate predictive tools have the potential to provide accurate estimations of the remaining shelf life of a food product in real time. This review summarizes the necessary steps to attain a transition from open labeling to real-time shelf-life measurements.

Life cycle assessment of Mexican polymer and high-durability cotton paper banknotes.

Science.gov (United States)

Luján-Ornelas, Cristina; Mancebo Del C Sternenfels, Uriel; Güereca, Leonor Patricia

2018-02-23

This study compares the environmental performance of Mexican banknotes printed on high-durability cotton paper (HD paper) and thermoplastic polymer (polymer) through a life cycle assessment to appraise the environmental impacts from the extraction of raw materials to the final disposal of the banknotes. The functional unit was defined considering the next parameters: 1) lifespan of the banknotes, stablished in 31.5 and 54months for HD paper and polymer, respectively; 2) denomination, selecting $200 pesos banknotes; 3) a 5year time frame and 4) a defined amount of money, in this case stablished as the monthly cash supply of an average Mexican household, equaling $12,708 pesos. Accordingly, 121 pieces for the HD paper and 71 pieces for the polymer banknotes were analyzed. The results favor the banknotes printed on polymer substrate primarily because of the longer lifespan of this type of material; however, there is a considerable environmental impact in the stages of distribution, followed by the extraction of the raw materials (crude oil) during manufacturing. Regarding the HD cotton paper, the major impact corresponds to extraction of the raw materials, followed by the distribution of the banknotes. The inclusion of the automatic teller machines (ATMs) in the life cycle assessment of banknotes shows that the electricity required by these devices became the largest contributor to the environmental impacts. Additionally, the sensitivity analysis that the average lifetime of the banknotes is a determining factor for the environmental impacts associated with the whole life cycle of this product. The life cycle stages that refer to the extraction of the raw materials, combined with the average lifetime of the banknotes and the electricity required during the usage stage, are determining factors in the total environmental impact associated with Mexican banknotes. Copyright © 2018 Elsevier B.V. All rights reserved.

An integrated factor analysis model for product eco-design based on full life cycle assessment

Energy Technology Data Exchange (ETDEWEB)

Zhou, Z.; Xiao, T.; Li, D.

2016-07-01

Among the methods of comprehensive analysis for a product or an enterprise, there exist defects and deficiencies in traditional standard cost analyses and life cycle assessment methods. For example, some methods only emphasize one dimension (such as economic or environmental factors) while neglecting other relevant dimensions. This paper builds a factor analysis model of resource value flow, based on full life cycle assessment and eco-design theory, in order to expose the relevant internal logic between these two factors. The model considers the efficient multiplication of resources, economic efficiency, and environmental efficiency as its core objectives. The model studies the status of resource value flow during the entire life cycle of a product, and gives an in-depth analysis on the mutual logical relationship of product performance, value, resource consumption, and environmental load to reveal the symptoms and potentials in different dimensions. This provides comprehensive, accurate and timely decision-making information for enterprise managers regarding product eco-design, as well as production and management activities. To conclude, it verifies the availability of this evaluation and analysis model using a Chinese SUV manufacturer as an example. (Author)

Life cycle assessment of a packaging waste recycling system in Portugal

International Nuclear Information System (INIS)

Ferreira, S.; Cabral, M.; Cruz, N.F. da; Simões, P.; Marques, R.C.

2014-01-01

Highlights: • We modeled a real packaging waste recycling system. • The analysis was performed using the life cycle assessment methodology. • The 2010 situation was compared with scenarios where the materials were not recycled. • The “Baseline” scenario seems to be more beneficial to the environment. - Abstract: Life Cycle Assessment (LCA) has been used to assess the environmental impacts associated with an activity or product life cycle. It has also been applied to assess the environmental performance related to waste management activities. This study analyses the packaging waste management system of a local public authority in Portugal. The operations of selective and refuse collection, sorting, recycling, landfilling and incineration of packaging waste were considered. The packaging waste management system in operation in 2010, which we called “Baseline” scenario, was compared with two hypothetical scenarios where all the packaging waste that was selectively collected in 2010 would undergo the refuse collection system and would be sent directly to incineration (called “Incineration” scenario) or to landfill (“Landfill” scenario). Overall, the results show that the “Baseline” scenario is more environmentally sound than the hypothetical scenarios

Life cycle assessment of a packaging waste recycling system in Portugal

Energy Technology Data Exchange (ETDEWEB)

Ferreira, S.; Cabral, M. [CEG-IST, ULisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Cruz, N.F. da, E-mail: nunocruz@tecnico.ulisboa.pt [IST, ULisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Simões, P. [IST, ULisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Marques, R.C. [CESUR, IST, ULisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal)

2014-09-15

Highlights: • We modeled a real packaging waste recycling system. • The analysis was performed using the life cycle assessment methodology. • The 2010 situation was compared with scenarios where the materials were not recycled. • The “Baseline” scenario seems to be more beneficial to the environment. - Abstract: Life Cycle Assessment (LCA) has been used to assess the environmental impacts associated with an activity or product life cycle. It has also been applied to assess the environmental performance related to waste management activities. This study analyses the packaging waste management system of a local public authority in Portugal. The operations of selective and refuse collection, sorting, recycling, landfilling and incineration of packaging waste were considered. The packaging waste management system in operation in 2010, which we called “Baseline” scenario, was compared with two hypothetical scenarios where all the packaging waste that was selectively collected in 2010 would undergo the refuse collection system and would be sent directly to incineration (called “Incineration” scenario) or to landfill (“Landfill” scenario). Overall, the results show that the “Baseline” scenario is more environmentally sound than the hypothetical scenarios.

Control of selected VVER components life time SKODA JS a.s. experience

International Nuclear Information System (INIS)

Zdebor, J.; Pribulla, E.

2005-01-01

Experience from the operation of nuclear power plants with type VVER reactors has shown that the life time management of a number of nuclear reactor components is technically as well as with respect to safety substantiated even at the time which exceeds their originally designed life time. To accept such solution it was necessary to develop and implement a number of programs based on which it was possible to evaluate the actual condition of monitored equipment. It is a condition allowing to adopt solution concerning the possibility of their further operation. Experience from the manufacture of 21 sets of reactor equipment for VVER 440 and 3 sets VVER 1000 has been gathered in SKODA JS a.s. which have been completed by experience from service activities performed at operated nuclear power plants. Analyses of manufacturing data and in-service inspection results completed by a lot of laboratory tests have become the basis for the development of selected VVER components life time management programs. The paper focuses on the life time management of those VVER components which SKODA JS a.s. has most experience with. (authors)

ENVIRONMENTAL ASSESSMENT OF ROAD TRANSPORT IN A PASSENGER CAR USING THE LIFE CYCLE APPROACH

Directory of Open Access Journals (Sweden)

Piotr FOLĘGA

2017-06-01

Full Text Available Environmental issues are an increasingly important aspect of management in the transport sector; new methods have been developed for assessment of the environment in the transport sector using the life cycle approach. The paper presents the application of Well to Wheel (WTW and Life Cycle Assessment (LCA in the transport sector. The WTW method focuses on energy analysis and greenhouse gas emissions during the life cycle of fuels. WTW is used to support decision-making on the environmental aspects of transport, particularly with regard to fuel life cycle management, but this method omits important stages in the life cycle, particularly the ones regarding important circular economy guidelines such as reduction of natural resource consumption, impact on human health, etc. The LCA method provides a much broader approach to environmental assessment than WTW. LCA takes into consideration environmental impact in the whole life cycle of the vehicle, from the stage of production, through the period of exploitation, and finally its disposal.

Life quality assessment among patients with atopic eczema.

Science.gov (United States)

Holm, E A; Wulf, H C; Stegmann, H; Jemec, G B E

2006-04-01

Quantification of quality of life (QoL) related to disease severity is important in patients with atopic eczema (AE), because the assessment provides additional information to the traditional objective clinical scoring systems. To measure health-related QoL (HRQoL) in patients with AE; to analyse discriminant, divergent and convergent validity by examining the association between various QoL methods; and to examine the association between disease severity assessed by an objective Severity Scoring of Atopic Dermatitis (SCORAD) and QoL. HRQoL was assessed at two visits at a 6-monthly interval in 101 patients with AE and 30 controls with one dermatology-specific questionnaire [Dermatology Life Quality Index (DLQI) or Children's DLQI (CDLQI)], one generic instrument (SF-36) and three visual analogue scales (VASs) of severity and pruritus. Objective SCORAD was used to measure disease severity. Patients with AE had significantly lower QoL than healthy controls and the general population. DLQI /CDLQI, pruritus, and patient and investigator overall assessment of eczema severity were significantly (P mental component score of SF-36 (P = 0.019). AE has an impact on HRQoL. Patients' mental health, social functioning and role emotional functioning seem to be more affected than physical functioning. A simple VAS score of patients' assessment of disease severity showed the highest and most significant correlations with most of the HRQoL methods used. There is evidence to support the ability of patients with AE to make an accurate determination of their disease severity and QoL.

A new data architecture for advancing life cycle assessment

Science.gov (United States)

IntroductionLife cycle assessment (LCA) has a technical architecture that limits data interoperability, transparency, and automated integration of external data. More advanced information technologies offer promise for increasing the ease with which information can be synthesized...

Environmental impact assessment of different end-of-life LCD management strategies.

Science.gov (United States)

Amato, Alessia; Rocchetti, Laura; Beolchini, Francesca

2017-01-01

The strong growth of the electrical and electronic equipment production combined with its short lifespan are causing the production of a significant amount of waste to treat. In particular, the present paper focuses on end-of-life liquid crystal displays (LCDs) for their significant content of valuable materials, like plastic, glass and metals that could be recovered after dismantling. In the recent literature, traditional LCD recycling processes are combined with innovative treatments, which allow to recover critical raw materials, such as indium. In this context, we have evaluated the environmental impact of four different strategies of end-of-life LCD management: the disposal in landfilling sites, the incineration, the traditional recycling treatment and an innovative process also addressed to the recovery of indium. The traditional recycling treatment resulted to be the best scenario for the environment. Indeed, a life cycle assessment study gave following environmental burdens (if negative they are credits): 18, 81, -68, -60kg CO 2 -equiv. and 0.08, 0.01, -0.25, -0.18mol H + -equiv., for the four scenarios in the categories of global warming and acidification, respectively. The limit of the variability of LCD composition was overcome including additional literature data in the study. In order to improve the innovative process sustainability, a system of water recirculation was optimized with a consequent impact decrease of 35% in the global warming category. Nevertheless, this action should be combined with an increase of indium concentration in the panel because the low metal content represents the bottleneck of the overall approach. In this regard, a sensitivity analysis showed that an increase of at least five times in indium concentration in the waste is needed to observe an advantage of the innovative vs the traditional recycling process, when the impact category of climate change is considered. As a whole, the life cycle assessment was confirmed as a key

Analyzing Food-Related Life Satisfaction and other Predictors of Life Satisfaction in Central Chile.

Science.gov (United States)

Schnettler, Berta; Lobos, Germán; Orellana, Ligia; Grunert, Klaus; Sepúlveda, José; Mora, Marcos; Denegri, Marianela; Miranda, Horacio

2015-06-17

This study aimed to assess the effect of satisfaction with food-related life on life satisfaction among inhabitants of the main municipalities of central Chile. A survey was applied to a sample of 1,277 people, distributed proportionally by municipality. The questionnaire included the following scales: SWLS (Satisfaction with Life Scale), SWFL (Satisfaction with Food-related Life) and the Health-Related Quality of Life Index (HRQOL). Questions were asked regarding eating habits inside and outside the home, time available for meals at home, the assessment of five sources of happiness and the demographic characteristics of those surveyed. An ordered logit model was proposed, in which the dependent variable was satisfaction with life. Satisfaction with life was significantly related to the respondent's socioeconomic status, self-perception of health, degree of satisfaction with food-related life, monthly food expenditure, time available for supper with the family (p health problems, frequency of supper with the family, the degree of agreement with respect to family being an important source of happiness (p food consumption in fast food outlets (p health, family and eating, and the family interaction associated with eating may play an important role in overall satisfaction with life.

Life cycle assessment applied to nanomaterials in solid waste management

DEFF Research Database (Denmark)

Laurent, Alexis

While the generation of solid waste is globally increasing, much effort is concentrated to minimise the environmental impacts related to their management. With respect to nanoproducts (products containing nanomaterials), a growing amount of ‘nanowaste’ can be expected to enter the waste streams...... on specific waste types and waste management systems, all primarily reflecting situations in economicallydeveloped countries. At the same time, methodological practice was found in many studies not to be compliant with current reference guidance, such as the ISO standards and the ILCD Handbook. Likewise......, thus potentially posing problems on human health, e.g. through occupational exposure to engineered nanoparticles. In that setting, through its holistic quantification of environmental impacts, life cycle assessment (LCA) can be a useful decisionsupport tool for managing environmental sustainability...

Flexible friends? Flexible working time arrangements, blurred work-life boundaries and friendship

OpenAIRE

Pedersen, Vivi Bach; Lewis, Suzan

2012-01-01

The changing nature and demands of work raise concerns about how workers can find time for activities such as friendship and leisure, which are important for well-being. This article brings friendship into the work-life debate by exploring how individuals do friendship in a period characterised by time dilemmas, blurred work-life boundaries and increased employer- and employee-led flexible working. Interviews with employees selected according to their working time structures were supplemented...

Enriching psychological assessment using a person-specific analysis of interpersonal processes in daily life.

Science.gov (United States)

Roche, Michael J; Pincus, Aaron L; Rebar, Amanda L; Conroy, David E; Ram, Nilam

2014-10-01

We present a series of methods and approaches for clinicians interested in tracking their individual patients over time and in the natural settings of their daily lives. The application of person-specific analyses to intensive repeated measurement data can assess some aspects of persons that are distinct from the valuable results obtained from single-occasion assessments. Guided by interpersonal theory, we assess a psychotherapy patient's interpersonal processes as they unfold in his daily life. We highlight specific contexts that change these processes, use an informant report to examine discrepancies in his reported interpersonal processes, and examine how his interpersonal processes differ as a function of varying levels of self-esteem and anger. We advocate for this approach to complement existing psychological assessments and provide a scoring program to facilitate initial implementation. © The Author(s) 2014.

Life cycle assessment of waste paper management

DEFF Research Database (Denmark)

Merrild, Hanna Kristina; Damgaard, Anders; Christensen, Thomas Højlund

2008-01-01

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing oil global warming potentials. The consequence of choosing...... results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system...... a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate Was Studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved...

Life cycle assessment-driven selection of industrial ecology strategies.

Science.gov (United States)

Ardente, Fulvio; Cellura, Maurizio; Lo Brano, Valerio; Mistretta, Marina

2010-01-01

The paper presents an application of the Life-Cycle Assessment (LCA) to the planning and environmental management of an “eco-industrial cluster.” A feasibility study of industrial symbiosis in southern Italy is carried out, where interlinked companies share subproducts and scraps, services, structures, and plants to reduce the related environmental impact. In particular, the research focuses on new recycling solutions to create open recycling loops in which plastic subproducts and scraps are transferred to external production systems. The main environmental benefits are the reduction of resource depletion, air emissions, and landfilled wastes. The proposed strategies are also economically viable and they suggest cost abatement for the involved companies. This research shows the need for a multidisciplinary approach to data processing and to complexity managing of the investigated systems. In this context, life-cycle thinking is required to be promoted throughout the economy, as well to be as a part of all decisions on products and other criteria such as functionality, health, and safety. The Life-Cycle Assessment approach can be assumed as a methodology for influencing decision makers to make sustainable choices.

Life cycle assessment of products and technologies. LCA Symposium

Energy Technology Data Exchange (ETDEWEB)

Koukkari, H.; Nors, M. (eds.)

2009-12-15

VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

Life cycle assessments of energy from solid waste

Energy Technology Data Exchange (ETDEWEB)

Finnveden, Goeran; Johansson, Jessica; Lind, Per; Moberg, Aasa [Stockholm Univ. (Sweden). Dept. of Systems Ecology/Natural Resoruces Management Inst.]|[Defence Research Establishment, Stockholm (Sweden). Div. of Defence Analysis

2000-09-01

The overall aim of the present study is to evaluate different strategies for treatment of solid waste based on a life-cycle perspective. Important goals are to identify advantages and disadvantages of different methods for treatment of solid waste, and to identify critical factors in the systems, including the background systems, which may significantly influence the results. Included in the study are landfilling, incineration, recycling, digestion and composting. The waste fractions considered are the combustible and recyclable or compostable fractions of municipal solid waste. The methodology used is Life Cycle Assessment. The results can be used for policy decisions as well as strategic decisions on waste management systems.

Life cycle assessment of waste management systems: Assessing technical externalities

DEFF Research Database (Denmark)

Brogaard, Line Kai-Sørensen

The life cycle assessment (LCA) of a waste management system relies on many internal characteristics such as pollution control systems and recovery efficiencies. It also relies on technical externalities supporting the waste management system in terms of capital goods and energy and material...... for the primary and secondary production of materials, 366 datasets were gathered. The materials in focus were: paper, newsprint, cardboard, corrugated board, glass, aluminium, steel and plastics (HDPE, LDPE, LLDPE, PET, PS, PVC). Only one quarter of these data concerned secondary production, thus underlining...

Life Cycle Assessment - Theory and Practice

DEFF Research Database (Denmark)

This book is a uniquely pedagogical while still comprehensive state-of-the-art description of LCA-methodology and its broad range of applications. The five parts of the book conveniently provide: I) the history and context of Life Cycle Assessment (LCA) with its central role as quantitative and s...... needed to perform an LCA. V) An appendix with an LCA report template, a full example LCA report serving as inspiration for students who write their first LCA report, and a more detailed overview of existing LCIA methods and their similarities and differences....

Life cycle assessment of façade coating systems containing manufactured nanomaterials

Energy Technology Data Exchange (ETDEWEB)

Hischier, Roland, E-mail: roland.hischier@empa.ch; Nowack, Bernd [Swiss Federal Laboratories for Materials Science and Technology (Empa), Technology and Society Lab (TSL) (Switzerland); Gottschalk, Fadri [ETSS (Switzerland); Hincapie, Ingrid [Swiss Federal Laboratories for Materials Science and Technology (Empa), Technology and Society Lab (TSL) (Switzerland); Steinfeldt, Michael [University of Bremen FB 4/FG 10 Technological Design and Development (Germany); Som, Claudia [Swiss Federal Laboratories for Materials Science and Technology (Empa), Technology and Society Lab (TSL) (Switzerland)

2015-02-15

Nanotechnologies are expected to hold considerable potential for the development of new materials in the construction sector. Up to now the environmental benefits and risks of products containing manufactured nanomaterials (MNM) have been quantified only to a limited extent. This study aims to assess the potential environmental, health and safety impacts of coatings containing MNM using Life-cycle assessment: Do paints containing MNM result in a better environmental performance than paints not containing MNM? The study shows that the results depend on a number of factors: (i) The MNM have to substitute an (active) ingredient of the initial paint composition and not simply be an additional ingredient. (ii) The new composition has to extend the lifetime of the paint for such a time period that the consumption of paint along the life cycle of a building is reduced. (iii) Releases of MNM have to be reduced to the lowest level possible (in particular by dumping unused paint together with the packaging). Only when all these boundary conditions are fulfilled, which is the case only for one of the three paint systems examined, is an improved environmental performance of the MNM-containing paint possible for the paint compositions examined in this study.

Assessing quality of life in young adult cancer survivors: development of the Survivorship-Related Quality of Life scale.

Science.gov (United States)

Park, Crystal L; Wortmann, Jennifer H; Hale, Amy E; Cho, Dalnim; Blank, Thomas O

2014-10-01

Scientific advances in treatments and outcomes for those diagnosed with cancer in late adolescence and early adulthood depend, in part, on the availability of adequate assessment tools to measure health-related quality of life (HRQOL) for survivors in this age group. Domains especially relevant to late adolescence and young adulthood (LAYA; e.g., education and career, committed romantic relationships, worldview formation) are typically overlooked in studies assessing the impact of cancer, usually more appropriate for middle-aged or older survivors. Current HRQOL measures also tend to assess issues that are salient during or shortly after treatment rather than reflecting life years after treatment. To develop a new measure to better capture the experience of LAYA cancer survivors in longer-term survivorship (the LAYA Survivorship-Related Quality of Life measure, LAYA-SRQL), we completed an extensive measure development process. After a literature review and focus groups with LAYA cancer survivors, we generated items and ran confirmatory factor and reliability analyses using a sample of 292 LAYA cancer survivors. We then examined validity using existing measures of physical and mental health, quality of life, and impact of cancer. The final model consisted of two domains (satisfaction and impact), each consisting of ten factors: existential/spirituality, coping, relationship, dependence, vitality, health care, education/career, fertility, intimacy/sexuality, and cognition/memory. Confirmatory factor analysis and validity analyses indicated that the LAYA-SRQL is a psychometrically sound instrument with good validity. The LAYA-SRQL fills an important need in survivorship research, providing a way to assess HRQOL in LAYAs in a developmentally informed way.

Assessment of quality of life in patients with laryngeal cancer: A review of articles.

Science.gov (United States)

Kolator, Mateusz; Kolator, Patrycja; Zatoński, Tomasz

2018-04-19

This article presents a review of the medical literature published between 1994 and 2014 with the use of the PubMed database concerning quality-of-life instruments for head and neck cancer patients used to assess general well-being of patients with laryngeal cancer. The PubMed database was searched for articles containing the keywords "quality of life", "laryngeal neoplasm" and "questionnaires". The resulting articles were reviewed and analyzed. After the identification of questionnaires, an additional search was performed. The articles and questionnaires were described and analyzed. In 43 articles, the authors used questionnaires specific to the head and neck regions in order to assess the quality of life in patients with laryngeal cancer. Four different questionnaires were identified. The European Organization for Research and Treatment of Cancer (EORTC) questionnaire is most commonly used to assess the quality of life in patients with laryngeal cancer. Questionnaires are generally used in order to select from a range of different treatment methods. There are a few head and neck cancer-related quality-of-life instruments which are widely used to assess the quality of life in patients with laryngeal cancer, but they are not dedicated to that region of the body. Today, there is much more attention paid to the quality of life; therefore, there is a real need to develop specific scales for different types of cancer.

Life cycle assessment of the Danish electricity distribution network

DEFF Research Database (Denmark)

Turconi, Roberto; Simonsen, Christian G.; Byriel, Inger P.

2014-01-01

Purpose This article provides life cycle inventory data for electricity distribution networks and a life cycle assessment (LCA) of the Danish transmission and distribution networks. The aim of the study was to evaluate the potential importance of environmental impacts associated with distribution...... complexity and material consumption. Infrastructure provided important contributions to metal depletion and freshwater eutrophication (copper and aluminum for manufacturing of the cables and associated recycling being the most important). Underground 50-kV lines had larger impacts than overhead lines, and 0...

Life cycle based dynamic assessment coupled with multiple criteria decision analysis

DEFF Research Database (Denmark)

Sohn, Joshua; Kalbar, Pradip; Birkved, Morten

2017-01-01

the service life of the building. This case study uses both the established and the coupled MCDA assessment methods to quantify and assess the balance of impacts between the production of mineral wool insulation versus the production of space heat. The use of TOPSIS method for calculating single scores......This work looks at coupling Life cycle assessment (LCA) with a dynamic inventory and multiple criteria decision analysis (MCDA) to improve the validity and reliability of single score results for complex systems. This is done using the case study of a representative Danish single family home over...... not matter which impact assessment is applied. However, for the scenarios where other impact categories vary inversely or independently from the climate change impact indicator, such as with renewable energy production, there is need for a more unconventional method, such as the TOPSIS method...

Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

National Research Council Canada - National Science Library

Mandelbaum, Jay

2006-01-01

.... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

Designing life-time recycling loops for elastomer products

NARCIS (Netherlands)

Noordermeer, Jacques; Dierkes, Wilma; Blume, Anke; Dijkhuis, Kuno; van Hoek, Hans; Reuvekamp, Louis; Saiwari, Siti

2017-01-01

With depletion of natural resources and growing awareness of the limited capabilities of the globe to cope with pollution, the need to design life-time recycling loops for all types of products is steadily increasing. Rubber articles of all sorts and the need for a proper disposal of these at the

Quality of life and time perspective in inflammatory bowel disease patients.

Science.gov (United States)

Laguette, Vanessa; Apostolidis, Themis; Dany, Lionel; Bellon, Nelly; Grimaud, Jean-Charles; Lagouanelle-Simeoni, Marie-Claude

2013-12-01

Numerous studies have shown the impact of inflammatory bowel disease (IBD) on patient quality of life (QoL), but no research has yet examined the impact of time's experience in the assessment of QoL in IBD. Our goal is to explore the links between QoL and time perspective (TP) and the role of TP as a determinant of QoL. Data were collected from 156 patients who completed a questionnaire comprising a generic measure (SF-12) and a specific measure (Inflammatory Bowel Disease Questionnaire) of QoL, a measure of TP (ZTPI) and a collection of socio-demographic and medical data. Correlational analyses illustrated the links between TP and QoL. Regression analyses revealed that records of Past-negative and Present-hedonistic perspectives predicted QoL. Past-negative time perspective seemed to have a deleterious impact, while a Present-hedonistic time perspective predicted a better QoL, and this was irrespective of the level of severity of the disease. These results suggest the importance of considering TP as a determinant of psychological QoL. They corroborate earlier findings on the relationship between TP and QoL associated with other pathologies. The past-negative register, which indicates rumination, tells us about the importance of considering the psychological experience of time in order to improve the QoL of patients.

Methodology for the Life Cycle Assessment of a Car-sharing Service

OpenAIRE

Guyon, Olivier

2017-01-01

Nowadays, circular economy is becoming more relevant in society. In the context of the automotive industry, we no longer simply work on emissions emitted during the vehicle use phase but rather on the environmental impacts induced during all phases of the vehicle's life cycle (manufacturing, logistics, use, maintenance and end of life). For this purpose, many automakers, including the Group PSA, use life cycle assessment (LCA) to determine these environmental impacts. Also, the economy of sha...

Quality of life assessment of patients with schizophrenic spectrum disorders from Psychosocial Care Centers

Directory of Open Access Journals (Sweden)

Tatiana Fernandes Carpinteiro da Silva

2011-01-01

Full Text Available OBJECTIVE: Assessing the quality of life and the clinical and social-demographic factors associated in schizophrenic spectrum patients (ICD-10 F20-F29 attending CAPS at the programmatic area 3.0. METHODS: A cross-sectional study was carried out in a sample of schizophrenic spectrum patients who have been enrolled in 2008 in CAPS in programmatic area (AP 3 at Rio de Janeiro city, using MINIPLUS to assess schizophrenia spectrum disorder and use of psychoactive substances, Positive and Negative Symptoms Scale (PANSS to assess psychiatric symptoms and Quality of Life Scale (QLS-BR to assess the quality of life. RESULTS: Seventy nine patients were included, of whom 74 (93.7% presented some impairment in quality of life. The most frequently affected area was occupational performance. Variables that showed a significant association with severe impairment of quality of life were: marital status, race, occupation, who patients lived with, homelessness, having children, previous psychiatric hospitalization, negative symptoms and symptoms designated as not applicable (being characterized by a lack of typical positive and negative symptoms. CONCLUSION: The knowledge of these factors should be crucial to implement health policies and psychosocial rehabilitation programs focused on improving the quality of life of these patients.

Life cycle impact assessment of bio-based plastics from sugarcane ethanol

NARCIS (Netherlands)

Tsiropoulos, I.; Faaij, A. P C; Lundquist, L.; Schenker, U.; Briois, J. F.; Patel, M. K.

2015-01-01

The increasing production of bio-based plastics calls for thorough environmental assessments. Using life cycle assessment, this study compares European supply of fully bio-based high-density polyethylene and partially bio-based polyethylene terephthalate from Brazilian and Indian sugarcane ethanol

Prospective assessment of the quality of life in patients treated surgically for rectal cancer with lower anterior resection and abdominoperineal resection.

Science.gov (United States)

Monastyrska, E; Hagner, W; Jankowski, M; Głowacka, I; Zegarska, B; Zegarski, W

2016-11-01

Rectal cancer is the most common malignant neoplasm of the gastrointestinal tract. The aim of the study was to assess the quality of life in patients undergoing surgical treatment for the rectal cancer, either lower anterior or abdominoperineal resection. 100 patients suffering from rectal cancer were selected for a prospective study (50-APR, 50-LAR). The quality of life was assessed two times: at the admission to the Department and 6 months following surgery. For assessment of the quality of life, two standard questionnaires were used, EORT QLQ-C30 and EORTC QLQ-C29. The studied groups were not different with respect to demographic factors. The patients who underwent LAR spent less time in hospital (p = 0.00001). The patients undergoing APR scored less with respect to physical ability (p = 0.0434), cognitive (p = 0.0363) and emotional state (p = 0.0463) and on symptom scale (nausea and vomiting - p: 0.0199, diarrhea - p: 0.0000, constipation (p = 0.0018)); however, the patients who were treated with LAR scored less on pain scale (p = 0.0189). The QLQ-C29 questionnaire revealed impaired functioning of patients 6 months following APR in terms of life chances (p = 0.0000) and problems with body weight (p = 0.0212). In both groups, the quality of life improved 6 months after surgery. LAR is a chance for better quality of life for many patients. Six months after surgery, the quality of life of patients improves regardless of the operating method (APR, LAR). Copyright © 2016 Elsevier Ltd, BASO ~ the Association for Cancer Surgery, and the European Society of Surgical Oncology. All rights reserved.

Evaluation of Environmental Impacts for Rice Agroecosystems using Life Cycle Assessment (LCA)

OpenAIRE

S. Khoramdel; J. Shabahang; A. Amin Ghafouri

2017-01-01

In order to evaluate life cycle assessment (LCA) for rice agroecosystems based on mean of nitrogen fertilizer levels (less than 190, 190-200, 200-210, 210-220 and more than 220 kg N ha) during 1999-2012, an experiment was conducted. Four steps includung goal definition and scoping, inventory analysis, life cycle impact assessment and integration and interpretation were computed. Functional unit was considered as one tone paddy. Impact categories were acidification, eutrophication in aquatic a...

EPRI steam turbine and generator NDE, life assessment, and maintenance workshop

International Nuclear Information System (INIS)

Nottingham, L.D.; Sabourin, P.F.

1992-10-01

On July 16--19, 1991, the EPRI NDE Center hosted the second EPRI Steam Turbine and Generator NDE, Life Assessment and Maintenance Workshop. This workshop was co-sponsored by the Nuclear Power and the Generation and Storage Divisions of EPRI. Attendees represented all sectors of the industry including utilities, equipment manufacturers, forging suppliers, service organizations, government organizations, insurancecarriers, and consultants from the United States and abroad. Domestic utility presence was again strong, with 105 representatives from 44 utilities in attendance. Australia, Canada, England, Finland, France, Germany, Italy, Japan, Korea, New Zealand, Spain, Sweden and Switzerland were represented in the international contingent. A key and integral part of the workshop was a vendor equipment fair, in which some 23 organizations displayed and demonstrated equipment and services that they offer. Formal presentation of 53 technical papers made up the technical portion of the agenda, which also included two breakout discussion sessions on topical subjects. To provide optimum opportunity for participants to hear all presentations on closely related topics, the sessions were set such that a NDE session ran parallel to the life assessment session. The first NDE session included turbine related topics while the first life assessment session addressed generator issues. The last sessions of the workshop were just reversed with turbine topics being addressed in the life assessment session while generator issues were presented in the NDE session. Presentations on maintenance topics and on monitoring and diagnostics topics were also presented in parallel sessions. These proceedings contain the texts of the papers presented at the workshop. Individual papers in indexed separately

Viability of the World Health Organization quality of life measure to assess changes in quality of life following treatment for alcohol use disorder.

Science.gov (United States)

Kirouac, Megan; Stein, Elizabeth R; Pearson, Matthew R; Witkiewitz, Katie

2017-11-01

Quality of life is an outcome often examined in treatment research contexts such as biomedical trials, but has been studied less often in alcohol use disorder (AUD) treatment. The importance of considering QoL in substance use treatment research has recently been voiced, and measures of QoL have been administered in large AUD treatment trials. Yet, the viability of popular QoL measures has never been evaluated in AUD treatment samples. Accordingly, the present manuscript describes a psychometric examination of and prospective changes in the World Health Organization Quality of Life measure (WHOQOL-BREF) in a large sample (N = 1383) of patients with AUD recruited for the COMBINE Study. Specifically, we examined the construct validity (via confirmatory factor analyses), measurement invariance across time, internal consistency reliability, convergent validity, and effect sizes of post-treatment changes in the WHOQOL-BREF. Confirmatory factor analyses of the WHOQOL-BREF provided acceptable fit to the current data and this model was invariant across time. Internal consistency reliability was excellent (α > .9) for the full WHOQOL-BREF for each timepoint; the WHOQOL-BREF had good convergent validity, and medium effect size improvements were found in the full COMBINE sample across time. These findings suggest that the WHOQOL-BREF is an appropriate measure to use in samples with AUD, that the WHOQOL-BREF scores may be examined over time (e.g., from pre- to post-treatment), and the WHOQOL-BREF may be used to assess improvements in quality of life in AUD research.

Using Life Cycle Assessment to Inform Decision-Making for Sustainable Buildings

Directory of Open Access Journals (Sweden)

Mieke Vandenbroucke

2015-05-01

Full Text Available Because the student residences of the Vrije Universiteit Brussel built in 1973 are not adapted to current comfort standards, the university decided to construct new accommodation facilities at the border of the campus. However, besides demolition, there was no strategy on how to deal with the existing ones. In the search for a more sustainable strategy, the university’s administration assigned the TRANSFORM research team to define various design strategies and to assess the long-term environmental consequences in order to select the best strategy by the use of Life Cycle Environmental Assessment. Current Life Cycle Environmental Assessments generally include maintenance, repair, replacement and operational energy consumption during use, but do not include future refurbishments. However, it is likely that their impact cannot be neglected either. Therefore, this article offers a framework which takes future refurbishments into account, in addition to the standard use impacts: initial and end-of-life impact. We report on the construction assemblies, the results of the assessments conducted and the advice provided. The results confirm that the impact of future refurbishments cannot be neglected. In addition, we observed that there were significant environmental savings when transforming the residences compared to new construction, and long-term benefits of a design enabling the reuse of building elements.

Economic input-output life-cycle assessment of trade between Canada and the United States.

Science.gov (United States)

Norman, Jonathan; Charpentier, Alex D; MacLean, Heather L

2007-03-01

With increasing trade liberalization, attempts at accounting for environmental impacts and energy use across the manufacturing supply chain are complicated by the predominance of internationally supplied resources and products. This is particularly true for Canada and the United States, the world's largest trading partners. We use an economic input-output life-cycle assessment (EIO-LCA) technique to estimate the economy-wide energy intensity and greenhouse gas (GHG) emissions intensity for 45 manufacturing and resource sectors in Canada and the United States. Overall, we find that U.S. manufacturing and resource industries are about 1.15 times as energy-intensive and 1.3 times as GHG-intensive as Canadian industries, with significant sector-specific discrepancies in energy and GHG intensity. This trend is mainly due to a greater direct reliance on fossil fuels for many U.S. industries, in addition to a highly fossil-fuel based electricity mix in the U.S. To account for these differences, we develop a 76 sector binational EIO-LCA model that implicitly considers trade in goods between Canada and the U.S. Our findings show that accounting for trade can significantly alter the results of life-cycle assessment studies, particularly for many Canadian manufacturing sectors, and the production/consumption of goods in one country often exerts significant energy- and GHG-influences on the other.

Service life assessment of timber highway bridges in USA climate zones

Science.gov (United States)

James P. Wacker; Brian K. Brashaw; Thomas G. Williamson; P. David Jones; Matthew S. Smith; Travis K. Hosteng; David L. Strahl; Lola E. Coombe; V.J. Gopu

2014-01-01

As engineers begin to estimate life-cycle costs and sustainable design approaches for timber bridges, there is a need for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This...

Leisure time physical activity and health-related quality of life.

Science.gov (United States)

Vuillemin, Anne; Boini, Stéphanie; Bertrais, Sandrine; Tessier, Sabrina; Oppert, Jean-Michel; Hercberg, Serge; Guillemin, Francis; Briançon, Serge

2005-08-01

There are few data on the relationship between health-related quality of life (HRQoL) and leisure time physical activity (LTPA) in the general population. We investigated the relationships of meeting public health recommendations (PHR) for moderate and vigorous physical activity with HRQoL in French adult subjects. LTPA and HRQoL were assessed in 1998 in 2333 men and 3321 women from the SU.VI.MAX. cohort using the French versions of the Modifiable Activity Questionnaire (MAQ) and the SF-36 questionnaire, respectively. Relationship between LTPA and HRQoL was assessed using analysis of variance. Results from multivariate analysis showed that meeting physical activity recommended levels was associated with higher HRQoL scores (except in Bodily pain dimension for women): differences in mean HRQoL scores between subjects meeting or not PHR ranged from 2.4 (Mental health) to 4.5 (Vitality) and from 2.2 (Bodily pain) to 5.7 (Vitality) for women and men, respectively. Subjects meeting PHR for physical activity had better HRQoL than those who did not. Our data suggest that 30' of moderate LTPA per day on a regular basis may be beneficial on HRQoL. Higher intensity LTPA is associated with greater HRQoL. This emphasizes the importance to promote at least moderate physical activity.

One method for life time estimation of a bucket wheel machine for coal moving

Science.gov (United States)

Vîlceanu, Fl; Iancu, C.

2016-08-01

Rehabilitation of outdated equipment with lifetime expired, or in the ultimate life period, together with high cost investments for their replacement, makes rational the efforts made to extend their life. Rehabilitation involves checking operational safety based on relevant expertise of metal structures supporting effective resistance and assessing the residual lifetime. The bucket wheel machine for coal constitute basic machine within deposits of coal of power plants. The estimate of remaining life can be done by checking the loading on the most stressed subassembly by Finite Element Analysis on a welding detail. The paper presents step-by-step the method of calculus applied in order to establishing the residual lifetime of a bucket wheel machine for coal moving using non-destructive methods of study (fatigue cracking analysis + FEA). In order to establish the actual state of machine and areas subject to study, was done FEA of this mining equipment, performed on the geometric model of mechanical analyzed structures, with powerful CAD/FEA programs. By applying the method it can be calculated residual lifetime, by extending the results from the most stressed area of the equipment to the entire machine, and thus saving time and money from expensive replacements.

State of the Art in Life Assessment for High Temperature Components Using Replication Method

International Nuclear Information System (INIS)

Kim, Duck Hee; Choi, Hyun Sun

2010-01-01

The power generation and chemical industry have been subjected to further material degradation with long term operations and need to predict the remaining service life of components, such as reformer tube and turbine rotor, that have operated at elevated temperatures. As a non-destructive technique, replication method with reliable metallurgical life and microstructural soundness assessment has been recognized with strongly useful method until now. Developments of this method have variously accomplished by new quantitative approach, such as carbide analysis, with A-parameter and grain deformation method. An overview of replication, some new techniques for material degradation and life assessment were introduced in this paper. Also, on-site applications and its reasonableness were described. As a result of having analyzed microstructure by replication method, carbide approach was quantitatively useful to life assessment

Fatigue life assessment of free spanning pipelines containing corrosion defects

Energy Technology Data Exchange (ETDEWEB)

Lopes, Rita de Kassia D.; Campello, Georga C.; Matt, Cyntia G. da Costa; Benjamin, Adilson C.; Franciss, Ricardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

2009-12-19

The free spanning pipelines assessment is a highlighted issue to be considered during the project and maintenance of the submarine pipelines. It is required to evaluate the fatigue life and the maximum stress due to VIV (Vortex Induced Vibration) as well as wave forces when applicable in case of shallow water. The code DNV-RP-F105 (2006) presents a methodology to calculate the fatigue life for free spanning pipelines. Such methodology however considers the pipe with no kind of defects. Nevertheless, sometimes corrosion defects are detected in periodic inspections and therefore their effects need to be taken into account in the fatigue life evaluation. The purpose of this paper thus is to present a procedure to assess the influence of the corrosion defects in the fatigue life of free spanning pipelines. Some FE analyses were performed to determine the stress concentrate factor (SCF) of the corrosion defects, which were used as input in the methodology presented in the code DNV-RP-F105 (2006). Curves of damage and so lifetime have been generated as function of the span length and water depth. As a practical application, this methodology was applied to a sub sea pipeline with several corrosion defects, localized in shallow water offshore Brazil. (author)

Ageing and life-time management in nuclear power stations - concept and examples; Alterungs- und Lebensdauermanagement in Kernkraftwerken - Konzept und Beispiele

Energy Technology Data Exchange (ETDEWEB)

Erve, M.; Tenckhoff, E. [Siemens AG Unternehmensbereich KWU, Erlangen (Germany)

1999-07-01

Knowledge, assessment and understanding of phenomena caused by ageing, together with systematic utilization and extension of the technical life-time of components and systems, are of critical importance to the safety and economy of electricity generation in nuclear power stations. Economic use can be optimized by integrated ageing and life-time management; it can also be used to improve performance characteristics. (orig.) [Deutsch] Fuer die Sicherheit und Wirtschaftlichkeit der Stromerzeugung in Kernkraftwerken sind die Kenntnis, Bewertung und Beherrschung alterungsbedingter Phaenomene und systematische Ausnutzung bzw. Verlaengerung der technischen Lebensdauer der Komponenten und Systeme von zentraler Bedeutung. Durch ganzheitliches Alterungs- und Lebensdauermanagement, das auch auf die Verbesserung von Leistungsmerkmalen abzielt, kann der wirtschaftliche Nutzen optimiert werden. (orig.)

ASSESSMENT OF QUALITY OF LIFE OF PARENTS OF CHILDREN WITH CEREBRAL PALSY

Directory of Open Access Journals (Sweden)

Shiji Chalipat

2016-10-01

Full Text Available BACKGROUND Raising a child with chronic disability is stressful and demanding task which can affect the quality of life of the parent/caregiver adversely. The aim of this study was to assess the quality of life of parents of children aged between 2-12 years with cerebral palsy. MATERIALS AND METHODS This was a cross sectional descriptive questionnaire based study, which included 30 parents of children with cerebral palsy between 2-12 years of age attending Paediatric OPD or Rehabilitation services. Interviews were conducted using a semistructured questionnaire and quality of life was assessed using World Health Organization Quality of Life-BREF (WHOQOLBREF- Questionnaire-short version. Statistical analysis was done with descriptive statistics using SPSS version 10. RESULTS The mean score of the social domain of quality of life of caregivers was the lowest (9.33±1.49 SD followed by psychological (18.23±1.50 SD. Seventy percent of parents reported their overall quality of life as neither good nor poor and 66.67% of parents were satisfied with their own health. CONCLUSION Quality of life of parents of children with CP was affected in all domains, with predominant affection of social domain. More than half of parents were satisfied with their own general health and they reported overall quality of life was neither good nor poor.

Assessing the Environmental Impact of Flax Fibre Reinforced Polymer Composite from a Consequential Life Cycle Assessment Perspective

Directory of Open Access Journals (Sweden)

Yelin Deng

2015-08-01

Full Text Available The study implements the consequential life cycle assessment (CLCA to provide a market based perspective on how overall environmental impact will change when shifting glass fibres to flax fibres as reinforcements in composite fabrication. With certain assumptions, the marginal flax fibre supply is identified to be a combination of Chinese flax fibre (70% and French flax fibre (30%. Due to inferior cultivars and coal-fired electricity in Chinese flax cultivation, the CLCA study reveals that flax mat-PP has 0.8–2 times higher environmental impact values than the glass mat-PP in most environmental impact categories over the production and end-of-life (EoL phases. For purpose of providing potential trajectories of marginal flax fibre supply, additional scenarios: the “all French fibre”, and “all Chinese fibre” are evaluated formulating the lower and upper boundaries in terms of environmental impact change, respectively. A “the attributional fibre supply mix” scenario is supplied as well. All of these scenarios are useful for policy analysis.

Personal attitudes toward time: The relationship between temporal focus, space-time mappings and real life experiences.

Science.gov (United States)

Li, Heng; Cao, Yu

2017-06-01

What influences how people implicitly associate "past" and "future" with "front" and "back?" Whereas previous research has shown that cultural attitudes toward time play a role in modulating space-time mappings in people's mental models (de la Fuente, Santiago, Román, Dumitrache & Casasanto, 2014), we investigated real life experiences as potential additional influences on these implicit associations. Participants within the same single culture, who are engaged in different intermediate-term educational experiences (Study 1), long-term living experiences (Study 2), and short-term visiting experiences (Study 3), showed their distinct differences in temporal focus, thereby influencing their implicit spatializations of time. Results across samples suggest that personal attitudes toward time related to real life experiences may influence people's space-time mappings. The findings we report on shed further light on the high flexibility of human conceptualization system. While culture may exert an important influence on temporal focus, a person's conceptualization of time may be attributed to a culmination of factors. © 2017 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Promoting Prospective Elementary Teachers' Learning to Use Formative Assessment for Life Science Instruction

Science.gov (United States)

Sabel, Jaime L.; Forbes, Cory T.; Zangori, Laura

2015-06-01

To support elementary students' learning of core, standards-based life science concepts highlighted in the Next Generation Science Standards, prospective elementary teachers should develop an understanding of life science concepts and learn to apply their content knowledge in instructional practice to craft elementary science learning environments grounded in students' thinking. To do so, teachers must learn to use high-leverage instructional practices, such as formative assessment, to engage students in scientific practices and connect instruction to students' ideas. However, teachers may not understand formative assessment or possess sufficient science content knowledge to effectively engage in related instructional practices. To address these needs, we developed and conducted research within an innovative course for preservice elementary teachers built upon two pillars—life science concepts and formative assessment. An embedded mixed methods study was used to evaluate the effect of the intervention on preservice teachers' (n = 49) content knowledge and ability to engage in formative assessment practices for science. Findings showed that increased life content knowledge over the semester helped preservice teachers engage more productively in anticipating and evaluating students' ideas, but not in identifying effective instructional strategies to respond to those ideas.

Characterization factors for global warming in life cycle assessment based on damages to humans and ecosystems.

Science.gov (United States)

De Schryver, An M; Brakkee, Karin W; Goedkoop, Mark J; Huijbregts, Mark A J

2009-03-15

Human and ecosystem health damage due to greenhouse gas (GHG) emissions is generally poorly quantified in the life cycle assessment of products, preventing an integrated comparison of the importance of GHGs with other stressor types, such as ozone depletion and acidifying emissions. In this study, we derived new characterization factors for 63 GHGs that quantify the impact of an emission change on human and ecosystem health damage. For human health damage, the Disability Adjusted Life Years (DALYs) per unit emission related to malaria, diarrhea, malnutrition, drowning, and cardiovascular diseases were quantified. For ecosystem health damage, the Potentially Disappeared Fraction (PDF) over space and time of various species groups, including plants, butterflies, birds, and mammals, per unit emission was calculated. The influence of value choices in the modeling procedure was analyzed by defining three coherent scenarios, based on Cultural theory perspectives. It was found that the characterization factor for human health damage by carbon dioxide (CO2) ranges from 1.1 x 10(-2) to 1.8 x 10(+1) DALY per kton of emission, while the characterization factor for ecosystem damage by CO2 ranges from 5.4 x 10(-2) to 1.2 x 10(+1) disappeared fraction of species over space and time ((km2 x year)/kton), depending on the scenario chosen. The characterization factor of a GHG can change up to 4 orders of magnitude, depending on the scenario. The scenario-specific differences are mainly explained by the choice for a specific time horizon and stresses the importance of dealing with value choices in the life cycle impact assessment of GHG emissions.

[Assessment of daily quality of life in children surviving cancer].

Science.gov (United States)

Lemétayer, F; Lanfranchi, J-B; Chastagner, P

2016-05-01

The purpose of this study was to identify the daily problems experienced by school-age children in remission from cancer. It also sought to assess the predictive value of these problems on the mental health of these children 1 year after the first assessment. Against this background, 50 children in remission from cancer and in mainstream education, aged 8-12 years, completed two questionnaires: the Quality of Life Systemic Inventory for Children (QLSI-C) (Missotten et al., 2007) and the Child Depression Inventory (CDI). THE QLSI-C consists of 20 life areas: Sleep, Diet, Physical pain, Health, Clothing, Physical appearance, Bedroom, Grandparents, Mother, Father, Siblings, Friends, How my friends talk about me, School, School results, Sport, Non-sporting activities, Autonomy, Obedience to authority, and Tolerance of frustration. Each of these 20 life areas was evaluated by the child by reference on each occasion to an ideal situation, first in relation to their current situation and then in relation to their personal goals, in order to measure the gap between these two evaluations. This difference was then weighted by the importance given to each life area and the dynamic situation of approximation to or distance from the goals. All the children in this study were seen in person for two interviews 1 year apart (T1 and T2). The analyses conducted following the PLS-PM approach enabled eight of the 20 life areas evaluated to be identified as difficult to access by the children in this study. These analyses also showed that the difficulties perceived by children in remission from cancer have mainly proximal effects (i.e., short-term) on the discomfort experienced (direct effect of difficulties expressed in T1 on discomfort felt at T1; idem for T2). However, the areas perceived as difficult at T1 did not enable distal effects (i.e., effect over a year) on the discomfort expressed in T2 to be updated. Nonetheless, the conflicts at T1 fed the conflicts at T2�

Life Cycle Assessment to Municipal Wastewater Treatment Plant

International Nuclear Information System (INIS)

Garcia, J. s.; Herrera, I.; Rodriguez, A.

2011-01-01

The evaluation was done at a Municipal Wastewater Treatment Plant (MWTP), through the application of the methodology of Life Cycle Assessment (LCA) performed by using a commercial tool called SIMAPRO. The objective of this study was to apply Life Cycle Assessment (LCA) in two systems: municipal wastewater effluent without treatment and Wastewater Treatment Plant (WTP) that is operating in poor condition and has a direct discharge to a natural body, which is a threat to the environment. A LCA was done using SIMAPRO 7, in order to determine the environmental impact in each scenery was assessed, a comparison of the impacts and propose improvements to decrease, following the steps this methodology and according to the respective standardized normative (ISO 14040/ ISO 14044). In this study, most of used data have been reported by the plant from early 2010 and some data from literature. We identified the environmental impacts generated by the treatment, making emphasis on those related to the subsequent use of the water body receiving the discharge, such as eutrophication (near to 15% reduction). Likewise, a comparative analysis between the impacts in the two systems, with and without treatment by analyzing the variation in the impact categories studied. Finally within this work, alternatives of improvements, in order to reduce the identified and quantified impacts are proposed. (Author) 33 refs.

Life Cycle Assessment of Energy Systems: Closing the Ethical Loophole of Social Sustainability

OpenAIRE

Sakellariou, Nikolaos

2015-01-01

AbstractLife Cycle Assessment of Energy Systems: Closing the Ethical Loophole of Social SustainabilitybyNikolaos SakellariouDoctor of Philosophy in Environmental Science, Policy, and ManagementUniversity of California, BerkeleyProfessor Alastair T. Iles, ChairThis dissertation investigates the historical and normative bases of what contemporary engineers consider to be the embodiment of sustainability: Life Cycle Assessment (LCA). It explores the interplay among technology ethics, energy syst...

Characteristics of the activity-affect association in inactive people: an ambulatory assessment study in daily life.

Directory of Open Access Journals (Sweden)

Birte eVon Haaren

2013-04-01

Full Text Available Acute and regular exercise as well as physical activity is related to wellbeing and positive affect. Recent studies have shown that even daily, unstructured physical activities increase positive affect. However, the attempt to achieve adherence to physical activity or exercise in inactive people through public health interventions has often been unsuccessful. Most studies analyzing the activity-affect association in daily life, did not report participants´ habitual activity behavior. Thus, samples included active and inactive people, but they did not necessarily exhibit the same affective reactions to physical activity in daily life. Therefore the present study investigated whether the association between physical activity and subsequent affective state in daily life can also be observed in inactive individuals. We conducted a pilot study with 29 inactive university students (mean age 21.3 yrs ± 1.7 using the method of ambulatory assessment. Affect was assessed via electronic diary and physical activity was measured with accelerometers. Participants had to rate affect every two hours on a six item bipolar scale reflecting the three basic mood dimensions energetic arousal, valence and calmness. We calculated activity intensity level (mean Metabolic Equivalent (MET value and the amount of time spent in light activity over the last 15 minutes before every diary prompt and conducted within-subject correlations. We did not find significant associations between activity intensity and the three mood dimensions. Due to the high variability in within-subject correlations we conclude that not all inactive people show the same affective reactions to physical activity in daily life. Analyzing the physical activity-affect association of inactive people was difficult due to little variance and distribution of the assessed variables. Interactive assessment and randomized controlled trials might help solving these problems. Future studies should examine

The thematic plant life assessment network (PLAN)

Energy Technology Data Exchange (ETDEWEB)

Hurst, R C; McGarry, D [EC/JRC Institute for Advanced Materials, Petten (Netherlands); Pedersen, H H [Brite Euram DG XII, Brussels (Belgium)

1999-12-31

The Plant Life Assessment Network (PLAN) is a Brite Euram Type II Thematic Network, initiated by the European Commission to facilitate structured co-operation between all cost shared action projects already funded by the Commission which fall under this common technical theme. The projects involved address a multiplicity of problems associated with plant life assessment and are drawn from Brite-Euram, Standards, Measurement and Testing, Nuclear Fission Safety and Esprit EC programmes. The main aim of the Network is to initiate, maintain and monitor a fruitful co-operation process between completed, ongoing and future EC R and D projects, thereby promoting improved cross fertilization and enhanced industrial exploitation of R and D results. As the project is in its infancy, this presentation covers the background to the initiative in some detail. In particular two key aspects are highlighted, namely, the requirement of the EC to launch such a network in the area of plant life assessment including its evolution from two small Thematic Research Actions and, secondly, the mechanism for structuring the Network in an ordered and proven way along the lines of the EC/JRC European Networks, PISC, NESC, AMES, ENIQ, ENAIS and EPERC. The operating and financial structure of the Network is detailed with reference made to the role of the executive Steering Committee, The Network Project Leader and the Network Financial Co-ordinator. Each of the 58 projects involved in the Network, representing a wide range of industrial sectors and disciplines, is distributed in terms of their efforts between 4 disciplinary Clusters covering Inspection, Instrumentation and Monitoring, Structural Mechanics and Maintenance. For each of these Clusters, an expert has been appointed as a Project Technical Auditor to support the elected Cluster Co-ordinator to define Cluster Tasks, which contribute to the overall objectives of the project. From the Project Representatives, Cluster Task Leaders and

The thematic plant life assessment network (PLAN)

Energy Technology Data Exchange (ETDEWEB)

Hurst, R.C.; McGarry, D. [EC/JRC Institute for Advanced Materials, Petten (Netherlands); Pedersen, H.H. [Brite Euram DG XII, Brussels (Belgium)

1998-12-31

The Plant Life Assessment Network (PLAN) is a Brite Euram Type II Thematic Network, initiated by the European Commission to facilitate structured co-operation between all cost shared action projects already funded by the Commission which fall under this common technical theme. The projects involved address a multiplicity of problems associated with plant life assessment and are drawn from Brite-Euram, Standards, Measurement and Testing, Nuclear Fission Safety and Esprit EC programmes. The main aim of the Network is to initiate, maintain and monitor a fruitful co-operation process between completed, ongoing and future EC R and D projects, thereby promoting improved cross fertilization and enhanced industrial exploitation of R and D results. As the project is in its infancy, this presentation covers the background to the initiative in some detail. In particular two key aspects are highlighted, namely, the requirement of the EC to launch such a network in the area of plant life assessment including its evolution from two small Thematic Research Actions and, secondly, the mechanism for structuring the Network in an ordered and proven way along the lines of the EC/JRC European Networks, PISC, NESC, AMES, ENIQ, ENAIS and EPERC. The operating and financial structure of the Network is detailed with reference made to the role of the executive Steering Committee, The Network Project Leader and the Network Financial Co-ordinator. Each of the 58 projects involved in the Network, representing a wide range of industrial sectors and disciplines, is distributed in terms of their efforts between 4 disciplinary Clusters covering Inspection, Instrumentation and Monitoring, Structural Mechanics and Maintenance. For each of these Clusters, an expert has been appointed as a Project Technical Auditor to support the elected Cluster Co-ordinator to define Cluster Tasks, which contribute to the overall objectives of the project. From the Project Representatives, Cluster Task Leaders and

Monetary valuation in Life Cycle Assessment

DEFF Research Database (Denmark)

Pizzol, Massimo; Weidema, Bo Pedersen; Brandão, Miguel

2015-01-01

different impacts and/or with other economic costs and benefits. For this reason, monetary valuation has a great potential to be applied also in Life Cycle Assessment (LCA), especially in the weighting phase. However, several challenges limit its diffusion in the field, which resulted in only a few......Monetary valuation is the practice of converting measures of social and biophysical impacts into monetary units and is used to determine the economic value of non-market goods, i.e. goods for which no market exists. It is applied in cost benefit analysis to enable the cross-comparison between...

Quality of life assessment in patients treated for metastatic cutaneous squamous cell carcinoma of the head and neck.

Science.gov (United States)

Wang, A Y; Palme, C E; Wang, J T; Morgan, G J; Gebski, V; Gilchrist, J; Veness, M J

2013-07-01

Treatment for metastatic cutaneous head and neck squamous cell carcinoma is usually multimodal and associated with morbidity. This study aimed to evaluate the impact of treatment on patients' quality of life. Cross-sectional survey of 42 patients (35 men, 7 women) at least 6 months after metastatic cutaneous head and neck squamous cell carcinoma treatment, using two standardised quality of life questionnaires: the Functional Assessment of Cancer Therapy - Head and Neck questionnaire and the Facial Disability Index, with statistical analysis to identify potential predictors of outcome. Female gender correlated with significantly lower Facial Disability Index physical function scores (p = 0.017). Alcohol consumption correlated with significantly better scores for Functional Assessment social well-being (p = 0.016), general total score (p = 0.041) and overall total score (p = 0.033), and for Facial Disability Index physical function (p = 0.034). Marital status, education, employment, chemotherapy, time from last treatment, parotidectomy and facial nerve sacrifice did not affect quality of life. The commonest patient complaints were dry mouth (76 per cent), altered voice quality and strength (55 per cent), and physical appearance (45 per cent). Female gender predicts worse quality of life, while alcohol consumption (versus none) predicted for better quality of life.

Tesla the life and times of an electric messiah

CERN Document Server

Cawthorne, Nigel

2014-01-01

Despite being incredibly popular during his time, Nikola Tesla today remains largely overlooked among lists of the greatest inventors and scientists of the modern era.  Thomas Edison gets all the glory for discovering the light bulb, but it was his one time assistant and life long arch nemesis, Tesla, who made the breakthrough in alternating current technology.  Edison and Tesla carried on a bitter feud for years, but it was Tesla's AC generators that illuminated the 1893 World's Fair in Chicago; the first time that an event of such magnitude had ever taken place under artificial light.  Today, all homes and electrical appliances run on Tesla's AC current.Born in Croatia in 1856, Tesla spoke eight languages and as well as almost single handedly developing household electricity.  During his life, he patented more than 700 inventions.  He invented electrical generators, FM radio, remote control robots, spark plugs and fluorescent lights.  He had a photographic memory and did advanced calculus and physic...

Remaining life assessment of a high pressure turbine rotor

International Nuclear Information System (INIS)

Nguyen, Ninh; Little, Alfie

2012-01-01

This paper describes finite element and fracture mechanics based modelling work that provides a useful tool for evaluation of the remaining life of a high pressure (HP) steam turbine rotor that had experienced thermal fatigue cracking. An axis-symmetrical model of a HP rotor was constructed. Steam temperature, pressure and rotor speed data from start ups and shut downs were used for the thermal and stress analysis. Operating history and inspection records were used to benchmark the damage experienced by the rotor. Fracture mechanics crack growth analysis was carried out to evaluate the remaining life of the rotor under themal cyclic loading conditions. The work confirmed that the fracture mechanics approach in conjunction with finite element modelling provides a useful tool for assessing the remaining life of high temperature components in power plants.

Leisure-Time and Occupational Physical Activity in Early and Late Adulthood in Relation to Later Life Physical Functioning.

Science.gov (United States)

Kulmala, Jenni; Ngandu, Tiia; Pajala, Satu; Lehtisalo, Jenni; Levälahti, Esko; Antikainen, Riitta; Laatikainen, Tiina; Oksa, Heikki; Peltonen, Markku; Rauramaa, Rainer; Soininen, Hilkka; Strandberg, Timo; Tuomilehto, Jaakko; Kivipelto, Miia

2016-10-01

Physical activity (PA) has beneficial effects on older age physical functioning, but longitudinal studies with follow-ups extending up to decades are few. We investigated the association between leisure-time PA (LTPA) and occupational PA (OPA) from early to late adulthood in relation to later life performance-based physical functioning. The study involved 1260 people aged 60 to 79 years who took part in assessments of physical functioning (Short Physical Performance Battery [SPPB] test, 10-m maximal walking test, and grip strength test). Participants' data on earlier life LTPA/OPA (age range 25 to 74 years) were received from the previous studies (average follow-up 13.4 years). Logistic, linear, and censored regression models were used to assess the associations between LTPA/OPA earlier in life and subsequent physical functioning. A high level of LTPA earlier in life was associated with a lower risk of having difficulties on the SPPB test (odds ratio [OR]: 0.37; 95% confidence interval [CI], 0.24-0.58) and especially on the chair rise test (OR: 0.42; 95% CI, 0.27-0.64) in old age. Heavy manual work predicted difficulties on SPPB (OR: 1.91; 95% CI, 1.22-2.98) and the chair rise test (OR: 1.75; 95% CI, 1.14-2.69) and poorer walking speed (β = .10, P = .005). This study highlights the importance of LTPA on later life functioning, but also indicates the inverse effects that may be caused by heavy manual work.

Life cycle assessment of ocean energy technologies

OpenAIRE

UIHLEIN ANDREAS

2015-01-01

Purpose Oceans offer a vast amount of renewable energy. Tidal and wave energy devices are currently the most advanced conduits of ocean energy. To date, only a few life cycle assessments for ocean energy have been carried out for ocean energy. This study analyses ocean energy devices, including all technologies currently being proposed, in order to gain a better understanding of their environmental impacts and explore how they can contribute to a more sustainable energy supply. Methods...

Life time of an SPM electrolyser in a water detritiation system

International Nuclear Information System (INIS)

Cristescu, Ion

2006-01-01

The Combined Electrolysis Catalytic Exchange (CECE) method in combination with Cryogenic Distillation (CD) was chosen for tritium recovery from tritiated water which will be produced during ITER operation. One of the key components with impact to both the tritium inventory and safety is the electrolyser. The solid polymer electrolyser type is proposed but the main concern is the life time in tritium environment. On overview of main activities devoted to the life time of a SPM and carried out at Mound facility-US, TPL JAERI and TL Karlsruhe are presented in this paper. (author)

Scenario Development and Delphi Application in Life Cycle Assessment for Assessing Environmental Impact of New Technology Case Study: Removal of Wind Turbines Project

Directory of Open Access Journals (Sweden)

Devina Fitrika Dewi

2016-05-01

Full Text Available Certain technology is intended to create eco-efficient products or process or is developed as answer to the recent challenge. This kind of technology consequently can also create another impact therefore it shall be assessed and analyzed.The focus of the study is on assessment method namely Life Cycle Analysis (LCA, Scenario development and Delphi application. The objective is to understand benefits and drawbacks of the combined methodology and observe practicality of its implementation for assessing new technology. The distinctive feature comes from the combination of social and technological foresight (as Delphi application and future studies (as Scenario development which are applied in the environmental assessment of a product (by Life Cycle Analysis.The utilization of LCA-Scenario-Delphi case study as an explanatory example is presented in the Removal Wind Turbines Project by the Danish Energy Agency. The wind turbine is considered new technology with some of it phases are yet to occur, for example: removal of turbines after phase out stage. Technology Assessment by LCA-Scenario-Delphi is complicated procedure, but necessary to validate the results. The drawbacks of this procedure are extensive time it consumes and the dependency on public participation and/or expert willingness to participate. Nonetheless, its advantages are due to its interactive feature; integration of knowledge from different areas of expertise and its assessment’s characteristic which focuses on process.

Time-dependent reliability analysis and condition assessment of structures

International Nuclear Information System (INIS)

Ellingwood, B.R.

1997-01-01

Structures generally play a passive role in assurance of safety in nuclear plant operation, but are important if the plant is to withstand the effect of extreme environmental or abnormal events. Relative to mechanical and electrical components, structural systems and components would be difficult and costly to replace. While the performance of steel or reinforced concrete structures in service generally has been very good, their strengths may deteriorate during an extended service life as a result of changes brought on by an aggressive environment, excessive loading, or accidental loading. Quantitative tools for condition assessment of aging structures can be developed using time-dependent structural reliability analysis methods. Such methods provide a framework for addressing the uncertainties attendant to aging in the decision process

Influence of shelf life on the setting time of type IV gypsum

Science.gov (United States)

Hapsari, M. L.; Irawan, B.; Damiyanti, M.

2017-08-01

Although expired materials can exhibit a deterioration in their properties, expired type IV gypsum can still be found on the market. In order to evaluate the influence of the shelf life on its setting time, two groups of type IV gypsum (GC Fuji rock EP) with different expiration dates were used in this research. The setting time tests were done in a mold using a Vicat Needle apparatus. The results of the statistical analysis showed a significant difference (pshelf life did influence the setting time of the type IV gypsum.

Life Cycle Assessment and Costing Methods for Device Procurement: Comparing Reusable and Single-Use Disposable Laryngoscopes.

Science.gov (United States)

Sherman, Jodi D; Raibley, Lewis A; Eckelman, Matthew J

2018-01-09

Traditional medical device procurement criteria include efficacy and safety, ease of use and handling, and procurement costs. However, little information is available about life cycle environmental impacts of the production, use, and disposal of medical devices, or about costs incurred after purchase. Reusable and disposable laryngoscopes are of current interest to anesthesiologists. Facing mounting pressure to quickly meet or exceed conflicting infection prevention guidelines and oversight body recommendations, many institutions may be electively switching to single-use disposable (SUD) rigid laryngoscopes or overcleaning reusables, potentially increasing both costs and waste generation. This study provides quantitative comparisons of environmental impacts and total cost of ownership among laryngoscope options, which can aid procurement decision making to benefit facilities and public health. We describe cradle-to-grave life cycle assessment (LCA) and life cycle costing (LCC) methods and apply these to reusable and SUD metal and plastic laryngoscope handles and tongue blade alternatives at Yale-New Haven Hospital (YNHH). The US Environmental Protection Agency's Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI) life cycle impact assessment method was used to model environmental impacts of greenhouse gases and other pollutant emissions. The SUD plastic handle generates an estimated 16-18 times more life cycle carbon dioxide equivalents (CO2-eq) than traditional low-level disinfection of the reusable steel handle. The SUD plastic tongue blade generates an estimated 5-6 times more CO2-eq than the reusable steel blade treated with high-level disinfection. SUD metal components generated much higher emissions than all alternatives. Both the SUD handle and SUD blade increased life cycle costs compared to the various reusable cleaning scenarios at YNHH. When extrapolated over 1 year (60,000 intubations), estimated costs increased

Therapeutic Assessment of Complex Trauma: A Single-Case Time-Series Study.

Science.gov (United States)

Tarocchi, Anna; Aschieri, Filippo; Fantini, Francesca; Smith, Justin D

2013-06-01

The cumulative effect of repeated traumatic experiences in early childhood incrementally increases the risk of adjustment problems later in life. Surviving traumatic environments can lead to the development of an interrelated constellation of emotional and interpersonal symptoms termed complex posttraumatic stress disorder (CPTSD). Effective treatment of trauma begins with a multimethod psychological assessment and requires the use of several evidence-based therapeutic processes, including establishing a safe therapeutic environment, reprocessing the trauma, constructing a new narrative, and managing emotional dysregulation. Therapeutic Assessment (TA) is a semistructured, brief intervention that uses psychological testing to promote positive change. The case study of Kelly, a middle-aged woman with a history of repeated interpersonal trauma, illustrates delivery of the TA model for CPTSD. Results of this single-case time-series experiment indicate statistically significant symptom improvement as a result of participating in TA. We discuss the implications of these findings for assessing and treating trauma-related concerns, such as CPTSD.

The life cycle dimension of time transfers in Europe

Directory of Open Access Journals (Sweden)

Marina Zannella

2013-11-01

Full Text Available Background: Reallocation of economic resources between generations and genders has important consequences for economic growth and inequality. Unpaid work is a relevant component of intergenerational transfers, but is invisible to traditional accounts. Time use data can complement accounts of monetary transfers. Objective: The main goal of this article is to provide estimates of life cycle profiles of consumption and production of unpaid activities. These profiles can be used to evaluate transfers of time by age and sex. Methods: We use data from the Multinational Time Use Study (MTUS to estimate profiles of time allocated to unpaid productive activities, by age, sex and household structure, for selected European countries. The unpaid working time is then distributed, with a statistical model, to those age groups that benefit from it, in order to estimate age-specific consumption profiles of time. Results: We observe large transfers of time from females to males, and from adults to children. Life course trajectories are qualitatively similar across countries, but with significant variations in levels. Differences in profiles by household structure may be associated with incentives or disincentives for particular fertility choices in different social and institutional settings. Conclusions: This article quantifies household production and non-market transfers. It offers insight into the underestimation of the economic contribution of women. Comments: This article provides some descriptive findings that could be incorporated with other research pursued by scholars in the National Transfer Accounts (NTA project to monetize the value of time and include it in standard transfer accounts.

Life cycle assessment of the end-of-life phase of a residential building.

Science.gov (United States)

Vitale, Pierluca; Arena, Noemi; Di Gregorio, Fabrizio; Arena, Umberto

2017-02-01

The study investigates the potential environmental impacts related to the end-of-life phase of a residential building, identified in a multifamily dwelling of three levels, constructed in the South of Italy by utilizing conventional materials and up-to-date procedures. An attributional life cycle assessment has been utilised to quantify the contributions of each stage of the end-of-life phase, with a particular attention to the management of the demolition waste. The investigation takes into account the selective demolition, preliminary sorting and collection of main components of the building, together with the processes of sorting, recycling and/or disposal of main fractions of the demolition waste. It quantifies the connections between these on-site and off-site processes as well as the main streams of materials sent to recycling, energy recovery, and final disposal. A sensitivity analysis has been eventually carried out by comparing the overall environmental performances of some alternative scenarios, characterised by different criteria for the demolition of the reference building, management of demolition waste and assessment of avoided burdens of the main recycled materials. The results quantify the advantage of an appropriate technique of selective demolition, which could increase the quality and quantity of residues sent to the treatment of resource recovery and safe disposal. They also highlight the contributions to the positive or negative environmental impact of each stage of the investigated waste management system. The recycling of reinforcing steel appears to play a paramount role, accounting for 65% of the total avoided impacts related to respiratory inorganics, 89% of those for global warming and 73% of those for mineral extraction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Materials for Nuclear Plants From Safe Design to Residual Life Assessments

CERN Document Server

Hoffelner, Wolfgang

2013-01-01

The clamor for non-carbon dioxide emitting energy production has directly  impacted on the development of nuclear energy. As new nuclear plants are built, plans and designs are continually being developed to manage the range of challenging requirement and problems that nuclear plants face especially when managing the greatly increased operating temperatures, irradiation doses and extended design life spans. Materials for Nuclear Plants: From Safe Design to Residual Life Assessments  provides a comprehensive treatment of the structural materials for nuclear power plants with emphasis on advanced design concepts.   Materials for Nuclear Plants: From Safe Design to Residual Life Assessments approaches structural materials with a systemic approach. Important components and materials currently in use as well as those which can be considered in future designs are detailed, whilst the damage mechanisms responsible for plant ageing are discussed and explained. Methodologies for materials characterization, material...

Delay times between harvesting or collection of food products and consumption for use in radiological assessments

International Nuclear Information System (INIS)

Jones, A L; Sherwood, J C

2009-01-01

From a radiological protection point of view, the inclusion of delay times when carrying out assessments of dose from consumption of foods should be considered. A review of delay times has been carried out to update a report published in 1983, to take account of changes and modernisations in industrial food processes, together with changes in diet and popularity of different foods in the United Kingdom. The new review considered more foods and data for existing foods have been reconsidered to check whether manufacturing processes or procedures have changed the shelf-life of any products. For some foods there have been changes made to the recommended delay times because of changes in manufacture or handling of the fresh foodstuff. A discussion is also included on the appropriate use of delay times in dose assessments.

Morphology and life-time investigations of dry-lubricating MoS2 films deposited by RF-sputtering

International Nuclear Information System (INIS)

Menoud, C.; Kocher, H.; Hinterman, H.E.

1985-01-01

Morphology and life-time investigations in vacuum, dry and humid air, of thin, dry-lubricating MoS 2 -films, deposited by rf-sputtering, are reported, using scanning electron microscopical analysis (SEM) and pin on disc friction measurements. Beyond a certain relative humidity the life-time decreases rapidly by about two orders of magnitude, and the coefficient of friction increases from 0.02 to 0.04 in vacuum to 0.20 to 0.30 in humid air. Considering these changes, the useful life-time of a coating was defined as the number of revolutions at a given radius till the coefficient of friction reaches a value of 0.4. Life-time studies were also conducted with Rhodium interlayers and other substrate and pin materials. With the above life-time criterion and the selected pin-on-disc test conditions, the life-time does not show any significant change within an MoS 2 thickness range of 0.2 to 1.5 μm. Finally the life-time distribution of 160 depositions as well as some preliminary results on torque measurements with MoS 2 coated precision roller bearings are presented. (author)

Normalisation and weighting in life cycle assessment: quo vadis?

DEFF Research Database (Denmark)

Pizzol, Massimo; Laurent, Alexis; Sala, Serenella

2017-01-01

Purpose: Building on the rhetoric question “quo vadis?” (literally “Where are you going?”), this article critically investigates the state of the art of normalisation and weighting approaches within life cycle assessment. It aims at identifying purposes, current practises, pros and cons, as well...

Methods for global sensitivity analysis in life cycle assessment

NARCIS (Netherlands)

Groen, Evelyne A.; Bokkers, Eddy; Heijungs, Reinout; Boer, de Imke J.M.

2017-01-01

Purpose: Input parameters required to quantify environmental impact in life cycle assessment (LCA) can be uncertain due to e.g. temporal variability or unknowns about the true value of emission factors. Uncertainty of environmental impact can be analysed by means of a global sensitivity analysis to

The Struggle to be Recognized: The Life, Times and Work of Emily Carr

OpenAIRE

JANOŠŤÁKOVÁ, Iveta

2014-01-01

This diploma thesis concentrates on a Canadian artist, Emily Carr, namely on her life, times and work. It explores the reasons why her work had originally been rejected and accepted at the end of her life. The first part of this thesis deals with the time and province where she lived, British Columbia, and also with the Aboriginal culture and art in Canada. It describes the public attitude and awareness of the Aboriginal topic. The second part deals with Carr's life (studies and sketching tri...

Finite life time effects in the coherent exciton transfer

International Nuclear Information System (INIS)

Barvik, I.; Herman, P.

1992-04-01

The paper addresses a specific problem in the exciton transfer in molecular aggregates, namely the influence of the finite life time effects, on the memory functions entering the Generalized Master Equation (GME) which connect different sites of the system. 7 refs, 2 figs

Life Cycle Assessment of the wind farm alpha ventus

Directory of Open Access Journals (Sweden)

Wagner H.-J.

2013-06-01

Full Text Available Life Cycle Assessments (LCA is an important tool for industry and policy makers, used to determine the actual emissions of a product or technology throughout its whole life cycle. In case of energy production systems or power plants, analysis of energy required to produce the materials and processes; emissions resulting from various processes for materials production and processes resulting into their Cumulated Energy Demand (CED and Global Warming Potential (GWP become important parameters when making decisions on further research, development and deployment of any technology. The method of carrying out such analysis is explained through a case study.

The Subjective Health Horizon Questionnaire (SHH-Q): Assessing Future Time Perspectives for Facets of an Active Lifestyle.

Science.gov (United States)

Düzel, Sandra; Voelkle, Manuel C; Düzel, Emrah; Gerstorf, Denis; Drewelies, Johanna; Steinhagen-Thiessen, Elisabeth; Demuth, Ilja; Lindenberger, Ulman

2016-01-01

A wider subjective time horizon is assumed to be positively associated with longevity and vitality. In particular, a lifestyle with exposure to novel and varied information is considered beneficial for healthy cognitive aging. At present, measures that specifically assess individuals' perceived temporal extension to engage in active lifestyles in the future are not available. We introduce and validate a new self-report measure, the Subjective Health Horizon Questionnaire (SHH-Q). The SHH-Q assesses individuals' future time perspectives in relation to four interrelated but distinct lifestyle dimensions: (1) novelty-oriented exploration (Novelty), (2) bodily fitness (Body), (3) work goals (Work), and (4) goals in life (Life Goals). The present study aims at: (a) validating the hypothesized factor structure of the SHH-Q, according to which the SHH-Q consists of four interrelated but distinct subscales, and (b) testing the hypothesis that the Novelty and Body subscales of the SHH-Q show positive and selective associations with markers of cognition and somatic health, respectively. Using structural equation modeling, we analyzed data from 1,371 healthy individuals (51% women) with a mean age of 70.1 years (SD = 3.6) who participated in the Berlin Aging Study II (BASE-II) and completed the SHH-Q. As predicted, the SHH-Q formed four correlated but distinct subscales: (1) Novelty, (2) Body, (3) Work, and (4) Life Goals. Greater self-reported future novelty orientation was associated with higher current memory performance, and greater future expectations regarding bodily fitness with better current metabolic status. The SHH-Q reliably assesses individual differences in four distinct dimensions of future time perspective. Two of these dimensions, Novelty and Body, show differential associations with cognitive status and somatic health. The SHH-Q may serve as a tool to assess how different facets of future time perspective relate to somatic health, cognition, motivation, and

Risk assessment considerations for plant protection products and terrestrial life-stages of amphibians.

Science.gov (United States)

Weltje, Lennart; Ufer, Andreas; Hamer, Mick; Sowig, Peter; Demmig, Sandra; Dechet, Friedrich

2018-04-28

Some amphibians occur in agricultural landscapes during certain periods of their life cycle and consequently might be exposed to plant protection products (PPPs). While the sensitivity of aquatic life-stages is considered to be covered by the standard assessment for aquatic organisms (especially fish), the situation is less clear for terrestrial amphibian life-stages. In this paper, considerations are presented on how a risk assessment for PPPs and terrestrial life-stages of amphibians could be conducted. It discusses available information concerning the toxicity of PPPs to terrestrial amphibians, and their potential exposure to PPPs in consideration of aspects of amphibian biology. The emphasis is on avoiding additional vertebrate testing as much as possible by using exposure-driven approaches and by making use of existing vertebrate toxicity data, where appropriate. Options for toxicity testing and risk assessment are presented in a flowchart as a tiered approach, progressing from a non-testing approach, to simple worst-case laboratory testing, to extended laboratory testing, to semi-field enclosure tests and ultimately to full-scale field testing and monitoring. Suggestions are made for triggers to progress to higher tiers. Also, mitigation options to reduce the potential for exposure of terrestrial life-stages of amphibians to PPPs, if a risk were identified, are discussed. Finally, remaining uncertainties and research needs are considered by proposing a way forward (road map) for generating additional information to inform terrestrial amphibian risk assessment. Copyright © 2018 Elsevier B.V. All rights reserved.

The Environmental Impact of Industrial Bamboo Products : Life-cycle Assessment and Carbon Sequestration

NARCIS (Netherlands)

Vogtlander, J.G.; Van der Lugt, P.

2014-01-01

This report gives a Life-Cycle Assessment (LCA) and carbon footprint analysis on a selection of industrial bamboo products. The LCA is made for cradle-to-gate, plus the end-of-life stages of the bamboo products. For end-of-life it is assumed that 90% of the bamboo products are incinerated in an

Technological and life cycle assessment of organics processing odour control technologies

Energy Technology Data Exchange (ETDEWEB)

Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

2015-09-15

As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

PWR life time: the EDF project

International Nuclear Information System (INIS)

Noel, R.; Reynes, L.; Mercier, J.P.

1987-01-01

Operating a very large number of standardized PWR units which supply today 70% of French power generation, Electricite de France is highly interested in getting the best estimate of the safe and economical life of these plants. An extensive program of work has been undertaken in this respect. The studies have first to go through all available data on aging process, survey and maintenance of a limited number of major components. This review will lead to recommendation of complementary work in these fields. The first conclusions are that these units are able to perform a long service time, under provision of careful survey and maintenance [fr

Use of NDE and FM for the assessment of remaining life of steam turbines

Energy Technology Data Exchange (ETDEWEB)

Alley, T [Duke Power Co., Charlotte, NC (United States); Stone, R [Electric Power Research Inst., Charlotte, NC (United States). Nondestructive Evaluation Center

1988-12-31

Catastrophic failures of rotating turbine components, such as the Gallatin rotor burst in 1974 and the shrunk-on disk rupture at Hinkley Point in 1969, alerted the utility industry to the failure potential of these components. Such failures can cause severe financial loss; endanger personnel; and, in nuclear plants, damage safety related equipment. To adequately predict the remaining life of a turbine rotor requires accurate information about component flaws, material properties, future operating loads, relevant failure mechanisms, and an approach to combine this information to make an assessment of remaining life. EPRI has supported the development of improved ultrasonic test equipment for use from the rotor bore (bore-sonic examination) and a fracture mechanics based life assessment code called SAFER (Stress and Fracture Evaluation of Rotors). The EPRI NDE Center has supported the transfer of this technology to industry. This presentation deals with the NDE Center`s transfer of the NDE and life assessment technology to industry and discusses a particular application by Duke Power Company at their Allen Plant, Unit 1 to extend the operating life of an IP/LP turbine. (author).

Use of NDE and FM for the assessment of remaining life of steam turbines

International Nuclear Information System (INIS)

Alley, T.; Stone, R.

1988-01-01

Catastrophic failures of rotating turbine components, such as the Gallatin rotor burst in 1974 and the shrunk-on disk rupture at Hinkley Point in 1969, alerted the utility industry to the failure potential of these components. Such failures can cause severe financial loss; endanger personnel; and, in nuclear plants, damage safety related equipment. To adequately predict the remaining life of a turbine rotor requires accurate information about component flaws, material properties, future operating loads, relevant failure mechanisms, and an approach to combine this information to make an assessment of remaining life. EPRI has supported the development of improved ultrasonic test equipment for use from the rotor bore (bore-sonic examination) and a fracture mechanics based life assessment code called SAFER (Stress and Fracture Evaluation of Rotors). The EPRI NDE Center has supported the transfer of this technology to industry. This presentation deals with the NDE Center's transfer of the NDE and life assessment technology to industry and discusses a particular application by Duke Power Company at their Allen Plant, Unit 1 to extend the operating life of an IP/LP turbine. (author)

Developing Students' Understanding of Industrially Relevant Economic and Life Cycle Assessments

Science.gov (United States)

Bode, Claudia J.; Chapman, Clint; Pennybaker, Atherly; Subramaniam, Bala

2017-01-01

Training future leaders to understand life cycle assessment data is critical for effective research, business, and sociopolitical decision-making. However, the technical nature of these life cycle reports often makes them challenging for students and other nonexperts to comprehend. Therefore, we outline here the key takeaways from recent economic…

Assessing the Value of Real-life Brands in Virtual Worlds

DEFF Research Database (Denmark)

Mattsson, Jan; Barnes, Stuart; Hartley, Nicole

2015-01-01

World. A key finding is the difficulty in creating emotional brand value in Second Life which has serious implications for the sustainability of current real-life brands in Virtual Worlds. The paper rounds off with conclusions and implications for future research and practice in this very new area.......Virtual Worlds are a significant new market environment for brand-building through experiential customer service interactions. Using value theory, this paper aims to assess the experiential brand value of real-life brands that have moved to the Virtual World of Second Life. A key premise...... is that current brand offerings in Virtual Worlds do not offer consumers adequate experiential value. The results demonstrate both the validity of an axiological approach to examining brand value, and highlight significant problems in consumer perceptions of the experiential value of brands within the Virtual...

Aging management and life assessment of buried commodities in nuclear power plants

International Nuclear Information System (INIS)

Park, J. H.; Jung, I. S.; Jo, H. S.; Kim, M. G.; Kim, S. T.; Lee, S. S.

2000-01-01

General field survey, inspection and life assessment were performed to establish effective aging management program of buried commodities in nuclear power plant. Basic informations on material characteristics, aging degradation experiences and maintenance history were gathered. Considering their degradation effects on power operation or safety, buried commodities were screened for the aging management priority. Various inspection techniques were applied in field survey and inspection, and their results were incorporated in the life assessment of buried commodities. In the aspect of aging degradation, general status of buried commodities were considered still sound while some revealed local degradation

Trajectories of quality of life, life satisfaction, and psychological adjustment after prostate cancer.

Science.gov (United States)

Chambers, Suzanne K; Ng, Shu Kay; Baade, Peter; Aitken, Joanne F; Hyde, Melissa K; Wittert, Gary; Frydenberg, Mark; Dunn, Jeff

2017-10-01

To describe trajectories of health-related quality of life (QoL), life satisfaction, and psychological adjustment for men with prostate cancer over the medium to long term and identify predictors of poorer outcomes using growth mixture models. One-thousand sixty-four (82.4% response) men diagnosed with prostate cancer were recruited close to diagnosis and assessed over a 72-month (6-year) period with self-report assessment of health-related QoL, life satisfaction, cancer-related distress, and prostate specific antigen anxiety. Urinary, bowel, and sexual function were also assessed using validated questionnaires. Poorer physical QOL was predicted by older age, lower education, lower income, comorbidities, and receiving hormone therapy. Lower life satisfaction was related to younger age, lower income, not being partnered, and comorbidities. Poorer psychological trajectories were predicted by younger age, lower income, comorbidities, and receiving radical prostatectomy or brachytherapy. Better urinary, bowel, and sexual function were related to better global outcomes over time. Anxiety about prostate specific antigen testing was rare. Distinct trajectories exist for medium- to long-term QoL, life satisfaction, and psychological adjustment after prostate cancer; with age and socioeconomic deprivation playing a differential role in men's survivorship profile and the impact of functional status on outcomes increasing over time. These results reinforce the need for an appraisal of men's life course in addition to treatment side effects when planning survivorship care after cancer. © 2016 The Authors. Psycho-Oncology Published by John Wiley & Sons Ltd.

Assessment of Quality of Life in Patients With Skin Disorders Undergoing Ayurvedic Panchakarma (Biopurification) as Management.

Science.gov (United States)

Deshpande, Harish; Shivakumar; Kavita, M B; Tripathy, T B; Chaturvedi, Ashutosh

2016-07-01

Chronic skin conditions can have a negative impact on one's quality of life, affecting their physical, functional, and emotional well-being. Whereas biopurifactory measures (panchakarma) of Ayurveda claims to provide better quality of life after treatment. Hence current study is planned to provide evidence in patients with skin disorders, undergoing Ayurvedic treatment. Sixty patients with skin disorder, who underwent purification therapies like therapeutic emesis and therapeutic purgation, were randomly placed in 2 groups to assess quality of life. Quality of life assessment was done with the help of Skindex-29 among the patients before and after Ayurvedic purification therapy. Thereafter, the quality of life assessment was done on the first follow-up. A statistically significant improvement in the quality of life domains-emotions, functioning, and symptoms-after the Ayurvedic management was observed with P value Ayurveda purification therapies. © The Author(s) 2015.

Life cycle assessment of onshore and offshore wind energy-from theory to application

International Nuclear Information System (INIS)

Bonou, Alexandra; Laurent, Alexis; Olsen, Stig I.

2016-01-01

Highlights: • An LCA of 2 onshore and 2 offshore wind power plants was performed. • Onshore wind power performs better than offshore per kWh delivered to the grid. • Materials are responsible for more than 79% and 70% of climate change impacts onshore and offshore respectively. • The bigger, direct drive turbines perform better than the smaller geared ones. • Climate change is a good KPI for wind power plant hotspot identification. - Abstract: This study aims to assess the environmental impacts related to the provision of 1 kWh to the grid from wind power in Europe and to suggest how life cycle assessment can inform technology development and system planning. Four representative power plants onshore (with 2.3 and 3.2 MW turbines) and offshore (4.0 and 6.0 MW turbines) with 2015 state-of-the-art technology data provided by Siemens Wind Power were assessed. The energy payback time was found to be less than 1 year for all technologies. The emissions of greenhouse gases amounted to less than 7 g CO_2-eq/kWh for onshore and 11 g CO_2-eq/kWh for offshore. Climate change impacts were found to be a good indicator for overall hotspot identification however attention should also be drawn to human toxicity and impacts from respiratory inorganics. The overall higher impact of offshore plants, compared to onshore ones, is mainly due to larger high-impact material requirements for capital infrastructure. In both markets the bigger turbines with more advanced direct drive generator technology is shown to perform better than the smaller geared ones. Capital infrastructure is the most impactful life cycle stage across impacts. It accounts for more than 79% and 70% of climate change impacts onshore and offshore respectively. The end-of-life treatment could lead to significant savings due to recycling, ca. 20–30% for climate change. In the manufacturing stage the impacts due to operations at the case company do not exceed 1% of the total life cycle impacts. This finding

Environmental Impacts of Solar Thermal Systems with Life Cycle Assessment

OpenAIRE

De Laborderie , Alexis; Puech , Clément; Adra , Nadine; Blanc , Isabelle; Beloin-Saint-Pierre , Didier; Padey , Pierryves; Payet , Jérôme; Sie , Marion; Jacquin , Philippe

2011-01-01

Available on: http://www.ep.liu.se/ecp/057/vol14/002/ecp57vol14_002.pdf; International audience; Solar thermal systems are an ecological way of providing domestic hot water. They are experiencing a rapid growth since the beginning of the last decade. This study characterizes the environmental performances of such installations with a life-cycle approach. The methodology is based on the application of the international standards of Life Cycle Assessment. Two types of systems are presented. Fir...

Assessing social impacts in a life cycle perspective-Lessons learned

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Jørgensen, Andreas; Dreyer, Louise Camilla

2008-01-01

In our globalised economy, important stakeholder groups nowadays hold companies responsible for the social impacts they cause in their product chain through activities like child labour, corruption or discrimination of employees. Many companies thus see themselves in need of a tool which can help...... LCA methodology supplements the traditional environment-oriented LCA and the life cycle costing tools in support of sustainability management addressing all three pillars of sustainability: people, planet and profit....... them make informed decisions about their social impacts throughout the life cycle of their products. The paper presents lessons learned from four years of work with industry on development of a methodology for social Life Cycle Assessment and implementation in the industrial product chain. The Social...

The influences of patient's satisfaction with medical service delivery, assessment of medical service, and trust in health delivery system on patient's life satisfaction in China.

Science.gov (United States)

Tang, Liyang

2012-09-14

Patient's satisfaction with medical service delivery/assessment of medical service/trust in health delivery system may have significant influence on patient's life satisfaction in China's health delivery system/in various kinds of hospitals.The aim of this study was to test whether and to what extent patient's satisfaction with medical service delivery/patient's assessments of various major aspects of medical service/various major aspects of patient's trust in health delivery system influenced patient's life satisfaction in China's health delivery system/in various kinds of hospitals. This study collaborated with National Bureau of Statistics of China to carry out a 2008 national urban resident household survey in 17 provinces, autonomous regions, and municipalities directly under the central government (N = 3,386), and specified ordered probit models were established to analyze dataset from this household survey. The key considerations in generating patient's life satisfaction involved patient's overall satisfaction with medical service delivery, assessment of doctor-patient communication, assessment of medical cost, assessment of medical treatment process, assessment of medical facility and hospital environment, assessment of waiting time for medical service, trust in prescription, trust in doctor, and trust in recommended medical examination. But the major considerations in generating patient's life satisfaction were different among low level public hospital, high level public hospital, and private hospital. The promotion of patient's overall satisfaction with medical service delivery, the improvement of doctor-patient communication, the reduction of medical cost, the improvement of medical treatment process, the promotion of medical facility and hospital environment, the reduction of waiting time for medical service, the promotion of patient's trust in prescription, the promotion of patient's trust in doctor, and the promotion of patient's trust in

Quality-of-life assessment of family planning adopters through user perspectives in the district of Karimnagar

Directory of Open Access Journals (Sweden)

Kameswararao Avasarala

2009-01-01

Full Text Available Background: Small families adopting family planning are usually considered happy families. They are expected to lead a better qualitative life. Quality-of-life (QOL is routinely assessed for knowing patients′ health status. Recently, the QOL concept has become increasingly popular for evaluating the impact of public health interventions. Hitherto, QOL is usually assessed by means of program achievements or indicators, which may sometimes be misleading. Hence, the new culture of QOL assessment by means of user perspectives is now becoming popular. Research Questions: 1 Is the quality-of-life of family planning (FP adopters better than that of non-FP adopters? 2 Are the user perspectives helpful in QOL assessment? Materials and Methods: A cross-sectional descriptive study was carried out among 50 FP adopting families and 50 non-FP adopting families from the village of Vutoor and the city of Karimnagar in Andhra Pradesh. Sampling Methods: Random sampling, Proportions and Chi square test. Results: Program perspectives revealed a better standard of living for FP adopters because they have amenities like housing, television, and vehicles and less mortality and morbidity ( P < 0.001. However, they lack positive feelings towards life, general adaptation, personal relationships, and leisure opportunities. Finally, self-assessment by FP adopters themselves revealed no significant increase in their qualitative life after family planning ( P = 0.05. Conclusions: While assessing the impact of a health program on quality-of-life, multiple methods of assessments including user perspectives are better than program indicators alone.

Development of a pico-second life-time spectrometer for positron annihilation studies

International Nuclear Information System (INIS)

Pujari, P.K.; Datta, T.; Tomar, B.S.; Das, S.K.

1992-01-01

Positron annihilation technique is a sensitive probe to investigate various physico-chemical phenomena due to the ability to provide information about the electron momentum and density in any medium. While measurements on the Doppler broadening and angular correlation of annihilation photons provide information about the electron momentum, the electron density at the annihilation site is obtained, by the positron life-time measurement. This report describes the development, optimization and calibration of a high resolution life-time spectrometer (FWHM=230 ps), based on fast-fast coincidence technique, a relatively new concept in nuclear timing spectroscopy. (author). 4 refs., 9 figs., 1 tab

Joint association of screen time and physical activity on self-rated health and life satisfaction in children and adolescents: the CASPIAN-IV study.

Science.gov (United States)

Matin, Nassim; Kelishadi, Roya; Heshmat, Ramin; Motamed-Gorji, Nazgol; Djalalinia, Shirin; Motlagh, Mohammad Esmaeil; Ardalan, Gelayol; Arefirad, Tahereh; Mohammadi, Rasool; Safiri, Saeid; Qorbani, Mostafa

2017-01-01

Self-rated health and life satisfaction are two subjective measures for assessing overall health status. This study aims to investigate the association of self-rated health and life satisfaction with physical activity and screen time. As part of the fourth survey of a national surveillance program in Iran (CASPIAN-IV study), 14 880 students aged 6 to 18 years were selected via multi-stage cluster sampling from 30 provinces. Data were obtained from the WHO Global School-Based Student Health Survey questionnaire. A total of 13 486 students with mean age of 12.47 (SD 3.36) completed the study. In crude model both prolonged screen time and physical activity were associated with favorable life satisfaction and self-rated health. However, in multivariate analysis only high physical activity was associated with good self-rated health (OR 1.37) and life satisfaction (OR 1.39), while prolonged screen time was not associated with good self-rated health (OR 1.02) and life satisfaction (OR 0.94). For combined screen time-physical activity variable, low screen time-high physical activity combination had the highest OR for both good self-rated health (OR 1.37) and life satisfaction (OR 1.43) in multivariate analysis. Our findings suggest that increasing physical activity is more crucial than emphasizing reducing screen time in improving the well-being of children and adolescents. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Life cycle assessment of gasoline and diesel

International Nuclear Information System (INIS)

Furuholt, Edgar

1995-01-01

A life cycle assessment (LCA) has been carried out to compare production and use of three different fuel products: regular gasoline, gasoline with MTBE and diesel. The study quantifies energy consumption and emissions through the production chain and assesses the potential impacts to the environment. Some of the methodological problems performing the LCA are discussed. The study indicates that production of gasoline with MTBE has potentially larger environmental impacts than production of regular gasoline, caused by the extra facilities for production of MTBE. The study also shows that the results are highly sensitive to the actual product specifications and assumptions that are made. Different product specifications can therefore lead to other conclusions. The results also indicate that production of diesel leads to significantly lower potential impacts than the gasolines

Positron life time and annihilation Doppler broadening measurements on transition metal complexes

International Nuclear Information System (INIS)

Levay, B.; Burger, K.

1982-01-01

Positron life time and annihilation Doppler broadening measurements have been carried out on 44 solid coordination compounds. Several correlations have been found between the annihilation life time (tau 1 ) and line shape parameters (L) and the chemical structure of the compounds. Halide ligands were the most active towards positrons. This fact supports the assumption on the possible formation of [e + X - ] positron-halide bound state. The life time was decreasing and the annihilation energy spectra were broadening with the increasing negative character of the halides. The aromatic base ligands affected the positron-halide interaction according to their basicity and space requirement and thus they indirectly affected the annihilation parameters, too. In the planar and tetrahedral complexes the electron density on the central met--al ion affected directly the annihilation parameters, while in the octahedral mixed complexes it had only an ind--irect effect through the polarization of the halide ligands. (author)

Comparative life cycle assessment of wastewater treatment in Denmark including sensitivity and uncertainty analysis

DEFF Research Database (Denmark)

Niero, Monia; Pizzol, Massimo; Gundorph Bruun, Henrik

2014-01-01

Wastewater treatment has nowadays multiple functions and produces both clean effluents and sludge, which is increasingly seen as a resource rather than a waste product. Technological as well as management choices influence the performance of wastewater treatment plants (WWTPs) on the multiple...... functions. In this context, Life Cycle Assessment (LCA) can determine what choices provide the best environmental performance. However, the assessment is not straightforward due to the intrinsic space and time-related variability of the wastewater treatment process. These challenges were addressed...... in a comparative LCA of four types of WWTPs, representative of mainstream treatment options in Denmark. The four plant types differ regarding size and treatment technology: aerobic versus anaerobic, chemical vs. combined chemical and biological. Trade-offs in their environmental performance were identified...

On-Board Real-Time Optimization Control for Turbo-Fan Engine Life Extending

Science.gov (United States)

Zheng, Qiangang; Zhang, Haibo; Miao, Lizhen; Sun, Fengyong

2017-11-01

A real-time optimization control method is proposed to extend turbo-fan engine service life. This real-time optimization control is based on an on-board engine mode, which is devised by a MRR-LSSVR (multi-input multi-output recursive reduced least squares support vector regression method). To solve the optimization problem, a FSQP (feasible sequential quadratic programming) algorithm is utilized. The thermal mechanical fatigue is taken into account during the optimization process. Furthermore, to describe the engine life decaying, a thermal mechanical fatigue model of engine acceleration process is established. The optimization objective function not only contains the sub-item which can get fast response of the engine, but also concludes the sub-item of the total mechanical strain range which has positive relationship to engine fatigue life. Finally, the simulations of the conventional optimization control which just consider engine acceleration performance or the proposed optimization method have been conducted. The simulations demonstrate that the time of the two control methods from idle to 99.5 % of the maximum power are equal. However, the engine life using the proposed optimization method could be surprisingly increased by 36.17 % compared with that using conventional optimization control.

Life cycle assessment of construction and demolition waste management

International Nuclear Information System (INIS)

Butera, Stefania; Christensen, Thomas H.; Astrup, Thomas F.

2015-01-01

Highlights: • LCA of C&DW utilisation in road vs. C&DW landfilling. • C&DW utilisation in road better than landfilling for most categories. • Transportation is the most important process in non-toxic impact categories. • Leaching of oxyanions is the critical process in toxic impact categories. • Modelling of Cr fate in the subsoil is highly influential to the results. - Abstract: Life cycle assessment (LCA) modelling of construction and demolition waste (C&DW) management was carried out. The functional unit was management of 1 Mg mineral, source separated C&DW, which is either utilised in road construction as a substitute for natural aggregates, or landfilled. The assessed environmental impacts included both non-toxic and toxic impact categories. The scenarios comprised all stages of the end-of-life management of C&DW, until final disposal of all residues. Leaching of inorganic contaminants was included, as was the production of natural aggregates, which was avoided because of the use of C&DW. Typical uncertainties related to contaminant leaching were addressed. For most impact categories, utilisation of C&DW in road construction was preferable to landfilling; however, for most categories, utilisation resulted in net environmental burdens. Transportation represented the most important contribution for most nontoxic impacts, accounting for 60–95 per cent of these impacts. Capital goods contributed with negligible impacts. Leaching played a critical role for the toxic categories, where landfilling had lower impacts than utilisation because of the lower levels of leachate per ton of C&DW reaching the groundwater over a 100-year perspective. Leaching of oxyanions (As, V and Sb) was critical with respect to leaching. Typical experimental uncertainties in leaching data did not have a pivotal influence on the results; however, accounting for Cr immobilisation in soils as part of the impact assessment was critical for modelling the leaching impacts. Compared

Life cycle assessment of construction and demolition waste management

Energy Technology Data Exchange (ETDEWEB)

Butera, Stefania, E-mail: stbu@teknologisk.dk; Christensen, Thomas H.; Astrup, Thomas F.

2015-10-15

Highlights: • LCA of C&DW utilisation in road vs. C&DW landfilling. • C&DW utilisation in road better than landfilling for most categories. • Transportation is the most important process in non-toxic impact categories. • Leaching of oxyanions is the critical process in toxic impact categories. • Modelling of Cr fate in the subsoil is highly influential to the results. - Abstract: Life cycle assessment (LCA) modelling of construction and demolition waste (C&DW) management was carried out. The functional unit was management of 1 Mg mineral, source separated C&DW, which is either utilised in road construction as a substitute for natural aggregates, or landfilled. The assessed environmental impacts included both non-toxic and toxic impact categories. The scenarios comprised all stages of the end-of-life management of C&DW, until final disposal of all residues. Leaching of inorganic contaminants was included, as was the production of natural aggregates, which was avoided because of the use of C&DW. Typical uncertainties related to contaminant leaching were addressed. For most impact categories, utilisation of C&DW in road construction was preferable to landfilling; however, for most categories, utilisation resulted in net environmental burdens. Transportation represented the most important contribution for most nontoxic impacts, accounting for 60–95 per cent of these impacts. Capital goods contributed with negligible impacts. Leaching played a critical role for the toxic categories, where landfilling had lower impacts than utilisation because of the lower levels of leachate per ton of C&DW reaching the groundwater over a 100-year perspective. Leaching of oxyanions (As, V and Sb) was critical with respect to leaching. Typical experimental uncertainties in leaching data did not have a pivotal influence on the results; however, accounting for Cr immobilisation in soils as part of the impact assessment was critical for modelling the leaching impacts. Compared

Life cycle assessment study of a Chinese desktop personal computer.

Science.gov (United States)

Duan, Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li, Jinhui

2009-02-15

Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps--i.e. the end of life phase--lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study.

Life cycle assessment study of a Chinese desktop personal computer

International Nuclear Information System (INIS)

Duan Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li Jinhui

2009-01-01

Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps - i.e. the end of life phase - lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study

How to integrate proxy data from two informants in life event assessment in psychological autopsy.

Science.gov (United States)

Zhang, Jie; Wang, Youqing; Fang, Le

2018-04-27

Life event assessment is an important part in psychological autopsy, and how to integrate its proxy data from two informants is a major methodological issue which needs solving. Totally 416 living subjects and their two informants were interviewed by psychological autopsy, and life events were assessed with Paykel's Interview for Recent Life Events. Validities of integrated proxy data using six psychological autopsy information reconstruction methods were evaluated, with living subjects' self-reports used as gold-standard criteria. For all the life events, average value of Youden Indexes for proxy data by type C information reconstruction method (choosing positive value from two informants) was larger than other five methods'. For family life related events, proxy data by type 1st information reconstruction method were not significantly different from living subjects' self-reports (P = 0.828). For all other life events, proxy data by type C information reconstruction method were not significantly different from the gold-standard. Choosing positive value is a relatively better method for integrating dichotomous (positive vs. negative) proxy data from two informants in life event assessment in psychological autopsy, except for family life related events. In that case, using information provided by 1st informants (mainly family member) is recommended.

Life cycle assessment of the application of nanoclays in wire coating

International Nuclear Information System (INIS)

Tellaetxe, A; Blázquez, M; Unzueta, I; Arteche, A; Egizabal, A; Ermini, V; Rose, J; Chaurand, P

2012-01-01

A life cycle assessment (LCA) is carried out to compare nanoclay-reinforced polymer wire coatings with conventional ones. While the conventional wire coatings contain standard halogen free retardants, in reinforced coatings, montmorillonite (nanoclay) is incorporated into electric cable linings as a rheological agent for an increased resistance to fire. In addition, a reduced load of standard halogen free retardants is obtained. The synergistic effect of the montmorillonite on traditional flame retardant additives (by the formation of a three-dimensional char network) can lead to a revolution in wire production. The application of nanoclays contributes also to anti-dripping effect and flexibility increase. Some producers have already started commercializing wire with nanotechnology-based coating; in the short term the use of nanoclay in wire coating production will probably reach a significant market share replacing traditional formulations. The main aim of this study is to compare the environmental impacts along the life cycle of a traditional wire coating (mineral flame retardants like ATH or MDH in a polymer matrix) with the nanoclay-reinforced wire coating, where the montmorillonite replaces a low percentage of the mineral flame retardant. The system boundaries of the study include the following unit processes: nanoclay production, thermoplastic material and mineral flame retardants production, cable coating manufacturing by extrusion and different end of life scenarios (recycling, incineration and landfill disposal). Whereas nanoreinforced composites have shown and increased fire retardance, the addition of nanomaterials seems to have no significant relevance in the environmental assessment. However, the lack of nano-specific characterization factors for nanomaterials and emission rates associated to the different life cycle stages -mainly in the extrusion and use phase, where accidental combustions can take place- still remains a challenge for realistic life

Driven by the future : Future time perspective across life domains and cultures

NARCIS (Netherlands)

Andre, L.

2018-01-01

Contemplating about the future is inevitable for our life and goal strivings. Consequently, Future Time Perspective (FTP) – individuals’ attitudes towards the future as a motivator for attitudes and behaviors – has been researched across disciplines and life domains. However, little is known about

Towards prospective life cycle sustainability analysis: exploring complementarities between social and environmental life cycle assessments for the case of Luxembourg's energy system

International Nuclear Information System (INIS)

Rugani, B.; Benetto, E.; Igos, E.; Quinti, G.; Declich, A.; Feudo, F.

2014-01-01

Sustainability typically relies on the durable interaction between humans and the environment. Historically, modelling tools such as environmental-life cycle assessment (E-LCA) have been developed to address the mitigation of environmental impacts generated by human activities. More recently, social-life cycle assessment (S-LCA) methods have been proposed to investigate the social sustainability sphere, looking at the life cycle effects generated by positive or negative pressures on social endpoints (i.e. well-being of stakeholders). Despite this promising added value, however, S-LCA methods still show limitations and challenges to be faced, e.g. regarding the lack of high quality datasets and the implementation of consensual social impact assessment indicators. This paper discusses on the complementarity between S-LCA and E-LCA towards the definition of prospective life cycle sustainability analysis (LCSA) approaches. To this aim, a case study is presented comparing (i) E-LCA results of business-as-usual (BAU) scenarios of energy supply and demand technology changes in Luxembourg, up to 2025, based on economic equilibrium modeling and hybrid life cycle inventories, with (ii) a monetary-based input-output estimation of the related changes in the societal sphere. The results show that environmental and social issues do not follow the same impact trends. While E-LCA outputs highlight contrasting patterns, they do generally underlie a relatively low decrease in the aggregated environmental burdens curve (around 20% of decrease over the single-score impact trend over time). In contrast, social hotspots (identified in S-LCA by specific risk indicators of human rights, worker treatment, poverty, etc.) are typically increasing over time according to the growth of the final energy demand. Overall, the case study allowed identifying possible synergies and tradeoffs related to the impact of projected energy demands in Luxembourg. Despite the studied approach does not fully

Asphalt Concrete Mixtures: Requirements with regard to Life Cycle Assessment

Directory of Open Access Journals (Sweden)

Jan Mikolaj

2015-01-01

Full Text Available Design of asphalt concrete, required properties of constituent materials and their mixing ratios, is of tremendous significance and should be implemented with consideration given to the whole life cycle of those materials and the final construction. Conformity with requirements for long term performance of embedded materials is the general objective of the Life Cycle Assessment (LCA. Therefore, within the assessment, material properties need to be evaluated with consideration given to the whole service life—from the point of embedding in the construction until their disposal or recycling. The evaluation focuses on verification of conformity with criteria set for these materials and should guarantee serviceability and performance during their whole service life. Recycling and reuse of asphalt concrete should be preferred over disposal of the material. This paper presents methodology for LCA of asphalt concrete. It was created to ensure not only applicability of the materials in the initial stage, at the point of their embedding, but their suitability in terms of normatively prescribed service performance of the final construction. Methods described and results are presented in a case study for asphalt mixture AC 11; I design.

Spiritual issues and quality of life assessment in cancer care.

Science.gov (United States)

Efficace, Fabio; Marrone, Robert

2002-11-01

Being diagnosed with cancer forces most human beings to face their own death. The comfortable sense of both invulnerability and immortality is shattered, making the patient thoroughly aware that life is finite and limited. Approaching death, cancer patients commonly embark on an inner journey involving a search for meaning as well as a reordering of priorities involving physical, psychological, social, and spiritual needs. Although interest in the role of spirituality, relating to both adjustment to cancer and the overall quality of life of cancer patients, has increased in recent years, most of the commonly used quality of life (QOL) instruments in oncology typically do not include spiritual issues. In this article, it is argued that assessing QOL effectively should involve all aspects of the personality, including mind, body, and spirit as well. This article also reviews recent studies, which have shown that spiritual well-being, although a many-sided and difficult construct to define, is closely related to the QOL of cancer patients. It is also suggested that further research is needed to understand how the new focus on spirituality can contribute to a more comprehensive assessment of patient's QOL in cancer care.

DEVELOPMENT OF THE METHOD AND U.S. NORMALIZATION DATABASE FOR LIFE CYCLE IMPACT ASSESSMENT AND SUSTAINABILITY METRICS

Science.gov (United States)

Normalization is an optional step within Life Cycle Impact Assessment (LCIA) that may be used to assist in the interpretation of life cycle inventory data as well as, life cycle impact assessment results. Normalization transforms the magnitude of LCI and LCIA results into relati...

Assessment of residual life of fast breeder test reactor

International Nuclear Information System (INIS)

Srinivasan, G.

2016-01-01

The Fast Breeder Test Reactor (FBTR) is a loop type sodium cooled fast reactor and has been in operation since 1985. As a part of regulatory requirement for relicensing, residual life assessment had to be carried out. The systems are made of SS 316, and designed for creep and fatigue. The design life for creep is 100,000 h at 550°C. The design fatigue cycle for operation from shutdown to full power varies from component to component. In general, most of the components are designed for 2000 cycles. The reactor has operated mostly below the design temperatures. It is seen that enough creep-fatigue life is available for the non-replaceable, permanent components. The residual life was found to be governed by the residual ductility of the Grid Plate supporting the core after neutron irradiation. Fast flux measurements were carried out at the grid plate location. Samples were irradiated and tensile tested. Results indicate the allowable dpa for a 10% residual ductility criterion as 4.37. This gave a residual life of ~ 6 Effective Full Power Years for the reactor as of Feb 2012. Measures to reduce the neutron dose on the grid plate are being taken. (author)

Exploring and modelling impacts of third molar experience on quality of life: a real-time qualitative study using Twitter.

Science.gov (United States)

Hanna, Kamal; Sambrook, Paul; Armfield, Jason M; Brennan, David S

2017-10-01

This study had two objectives: (i) to explore and model domains describing the real-time impact of third molars (TMs) on quality of life (QoL); and (ii) to assess the percentage coverage, in some generic health-related quality of life (HRQoL) and oral health-related quality of life (OHRQoL) instruments, of the TM QoL domains identified in this study. A global cross-sectional sample of tweets containing 'wisdom tooth' over a 1-week period retrieved 3,537 tweets. After random quota sampling, classification and filtering, only 843 tweets were included in the thematic analysis. A TM QoL model was constructed based on the associations of the identified domains. Domains for the selected generic HRQoL and OHRQoL instruments were plotted against the domains identified in the study to calculate the percentage coverage for each. The QoL domains identified were pain (n = 348, 41%), mood (n = 173, 20%), anxiety and fear (n = 54, 7%), enjoying food (n = 41, 4%), coping (n = 37, 4%), daily activities (n = 34, 4%), sleep (n = 24, 2%), social life (n = 19, 2%), physical health (n = 17, 2%), ability to think (n = 9, 1%), self-care (n = 8, 1%) and sporting & recreation (n = 2, <1%). The Assessment Quality of Life instrument (AQoL-8D) covers 87% of the TM QoL domains, while the rest of the HRQoL and OHRQoL instruments cover 33-60%. This study shows how Twitter can be used to obtain real-time QoL data, which might be used to model how TMs impact on QoL. The TM QoL domains identified in the study were generally under-represented among the generic OHRQoL instruments assessed while, the HRQoL AQoL-8D covered most of the TM QoL domains. The QoL domains identified in the study might be used to develop a new OHRQoL measure for TMs. © 2017 FDI World Dental Federation.

Environmental life cycle assessment of water supply in South Africa ...

African Journals Online (AJOL)

The life cycle impact assessment (LCIA) phase of LCAs evaluates the ... considered where water is used in the manufacturing sector of South Africa, and to identify ... The boosting requirements attribute most to the electricity dependency of the ...

Life Cycle Assessment and resource analysis of all-solid-state batteries

International Nuclear Information System (INIS)

Troy, Stefanie; Schreiber, Andrea; Reppert, Thorsten; Gehrke, Hans-Gregor; Finsterbusch, Martin; Uhlenbruck, Sven; Stenzel, Peter

2016-01-01

Highlights: • Laboratory scale production of an all-solid-state battery cell is assessed using Life Cycle Assessment. • The foremost share of overall emissions results from electricity consumption on site. • Possible improvement potential when upscaling production processes is investigated. • LCA results prove: early research stage products are not comparable to competing technologies at commercial stage. • Additional resource analysis shows: lanthanum, lithium and zirconium are critical materials. - Abstract: In this investigation the environmental impacts of the manufacturing processes of a new all-solid-state battery (SSB) concept in a pouch bag housing were assessed using the Life Cycle Assessment (LCA) methodology for the first time. To do so, the different production steps were investigated in detail, based on actual laboratory scale production processes. All in- and outputs regarding material and energy flows were collected and assessed. As LCA investigations of products in an early state of research and development usually result in comparatively higher results than those of mature technologies in most impact categories, potential future improvements of production processes and efficiency were considered by adding two concepts to the investigation. Apart from the laboratory production which depicts the current workflow, an idealized laboratory production and a possible industrial production were portrayed as well. The results indicate that electricity consumption plays a big role due to a lot of high temperature production steps. It needs to be improved for future industrial production. Also enhanced battery performance can strongly influence the results. Overall the laboratory scale results indeed improve strongly when assuming a careful use of resources, which will likely be a predominant target for industrial production. These findings therefore highlight hotspots and give improvement targets for future developments. It can also be deducted

Life Cycle Assessment for the Production of Oil Palm Seeds.

Science.gov (United States)

Muhamad, Halimah; Ai, Tan Yew; Khairuddin, Nik Sasha Khatrina; Amiruddin, Mohd Din; May, Choo Yuen

2014-12-01

The oil palm seed production unit that generates germinated oil palm seeds is the first link in the palm oil supply chain, followed by the nursery to produce seedling, the plantation to produce fresh fruit bunches (FFB), the mill to produce crude palm oil (CPO) and palm kernel, the kernel crushers to produce crude palm kernel oil (CPKO), the refinery to produce refined palm oil (RPO) and finally the palm biodiesel plant to produce palm biodiesel. This assessment aims to investigate the life cycle assessment (LCA) of germinated oil palm seeds and the use of LCA to identify the stage/s in the production of germinated oil palm seeds that could contribute to the environmental load. The method for the life cycle impact assessment (LCIA) is modelled using SimaPro version 7, (System for Integrated environMental Assessment of PROducts), an internationally established tool used by LCA practitioners. This software contains European and US databases on a number of materials in addition to a variety of European- and US-developed impact assessment methodologies. LCA was successfully conducted for five seed production units and it was found that the environmental impact for the production of germinated oil palm was not significant. The characterised results of the LCIA for the production of 1000 germinated oil palm seeds showed that fossil fuel was the major impact category followed by respiratory inorganics and climate change.

Rethinking the area of protection "natural resources" in life cycle assessment.

Science.gov (United States)

Dewulf, Jo; Benini, Lorenzo; Mancini, Lucia; Sala, Serenella; Blengini, Gian Andrea; Ardente, Fulvio; Recchioni, Marco; Maes, Joachim; Pant, Rana; Pennington, David

2015-05-05

Life cycle impact assessment (LCIA) in classical life cycle assessment (LCA) aims at analyzing potential impacts of products and services typically on three so-called areas of protection (AoPs): Natural Environment, Human Health, and Natural Resources. This paper proposes an elaboration of the AoP Natural Resources. It starts with analyzing different perspectives on Natural Resources as they are somehow sandwiched in between the Natural Environment (their cradle) and the human-industrial environment (their application). Reflecting different viewpoints, five perspectives are developed with the suggestion to select three in function of classical LCA. They result in three safeguard subjects: the Asset of Natural Resources, their Provisioning Capacity, and their role in Global Functions. Whereas the Provisioning Capacity is fully in function of humans, the global functions go beyond provisioning as they include nonprovisioning functions for humans and regulating and maintenance services for the globe as a whole, following the ecosystem services framework. A fourth and fifth safeguard subject has been identified: recognizing the role Natural Resources for human welfare, either specifically as building block in supply chains of products and services as such, either with or without their functions beyond provisioning. But as these are far broader as they in principle should include characterization of mechanisms within the human industrial society, they are considered as subjects for an integrated sustainability assessment (LCSA: life cycle sustainability assessment), that is, incorporating social, economic and environmental issues.

Life Cycle Assessment of Concrete

Energy Technology Data Exchange (ETDEWEB)

Sjunnesson, Jeannette

2005-09-15

This is an environmental study on concrete that follows the standard protocol of life cycle assessment (LCA). The study is done for two types of concrete, ordinary and frost-resistant concrete, and has an extra focus on the superplasticizers used as admixtures. The utilization phase is not included in this study since the type of construction for which the concrete is used is not defined and the concrete is assumed to be inert during this phase. The results show that it is the production of the raw material and the transports involved in the life cycle of concrete that are the main contributors to the total environmental load. The one single step in the raw material production that has the highest impact is the production of cement. Within the transportation operations the transportation of concrete is the largest contributor, followed by the transportation of the cement. The environmental impact of frost-resistant concrete is between 24-41 % higher than that of ordinary concrete due to its higher content of cement. Superplasticizers contribute with approximately 0.4-10.4 % of the total environmental impact of concrete, the least to the global warming potential (GWP) and the most to the photochemical ozone creation potential (POCP). Also the toxicity of the superplasticizers is investigated and the conclusion is that the low amount of leakage of superplasticizers from concrete leads to a low risk for the environment and for humans.

Global guidance on environmental life cycle impact assessment indicators: Progress and case study

DEFF Research Database (Denmark)

Frischknecht, Rolf; Fantke, Peter; Tschümperlin, Laura

2016-01-01

Purpose The life cycle impact assessment (LCIA) guidance flagship project of the United Nations Environment Programme (UNEP)/Society of Environmental Toxicology and Chemistry (SETAC) Life Cycle Initiative aims at providing global guidance and building scientific consensus on environmental LCIA in...

Projected life expectancy of people with HIV according to timing of diagnosis

DEFF Research Database (Denmark)

Nakagawa, Fumiyo; Lodwick, Rebecca K; Smith, Colette J

2012-01-01

positive in 2010. The effect of altering the diagnosis rate was investigated. Results: Assuming a high rate of HIV diagnosis (median CD4 cell count at diagnosis, 432¿cells/µl), projected median age at death (life expectancy) was 75.0 years. This implies 7.0 years of life were lost on average due to HIV......Background and objectives: Effective antiretroviral therapy (ART) has contributed greatly toward survival for people with HIV, yet many remain undiagnosed until very late. Our aims were to estimate the life expectancy of an HIV-infected MSM living in a developed country with extensive access to ART...... and healthcare, and to assess the effect of late diagnosis on life expectancy. Methods: A stochastic computer simulation model of HIV infection and the effect of ART was used to estimate life expectancy and determine the distribution of potential lifetime outcomes of an MSM, aged 30 years, who becomes HIV...

EASETECH Energy: Life Cycle Assessment of current and future Danish power systems

DEFF Research Database (Denmark)

Turconi, Roberto; Damgaard, Anders; Bisinella, Valentina

A new life cycle assessment (LCA) model software has been developed by DTU Environment, to facilitate detailed LCA of energy technologies. The model, EASETECH Energy, is dedicated to the specific technologies needed to assess energy production and energy systems and provides an unprecedented...

Life Cycle Assessment Framework for Indoor Emissions of Synthetic Nanoparticles

Science.gov (United States)

Life-Cycle Assessment (LCA) is a well-established method to evaluate impacts of chemicals on the environment and human health along the lifespan of products. However, the increasingly produced and applied nanomaterials (defined as one dimension <100 nm) show particular characteri...

Comprehensive assessment of cancer patients' concerns and the association with quality of life.

Science.gov (United States)

Yokoo, Minori; Akechi, Tatsuo; Takayama, Tomoko; Karato, Atsuya; Kikuuchi, Yuki; Okamoto, Naoyuki; Katayama, Kayoko; Nakanotani, Takako; Ogawa, Asao

2014-07-01

Comprehensive assessment of perceived concerns can be used to guide supportive care appropriate to individual cancer patients. This study sought to determine the prevalence of cancer patients' concerns and the degree to which these concerns contribute to patients' quality of life. Participants were patients with all types of cancer, who completed an Internet survey questionnaire regarding comprehensive concerns about physical, psychological, psychosocial and economic aspects of having cancer. The questionnaire was based on the newly developed Comprehensive Concerns Assessment Tool and the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire. We obtained complete data from 807 patients. Factors related to 'self-management' concerns were the most common (61.2%), followed by concerns about 'psychological symptoms' (48.5%), 'medical information' (46.2%), 'daily living' (29.9%), 'pain' (17.6%), 'constipation' (15.6%) and other 'physical symptoms' (15.2%). Multiple regression analysis revealed that all concerns except those about 'medical information' significantly contributed to quality of life. Cancer patients' concerns were shown to be multidimensional and significantly associated with quality of life. Thus, assessment of patients' concerns should be multidimensional in nature, and a multidisciplinary care team should help patients improve their quality of life. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Alternative "global warming" metrics in life cycle assessment: a case study with existing transportation data.

Science.gov (United States)

Peters, Glen P; Aamaas, Borgar; T Lund, Marianne; Solli, Christian; Fuglestvedt, Jan S

2011-10-15

The Life Cycle Assessment (LCA) impact category "global warming" compares emissions of long-lived greenhouse gases (LLGHGs) using Global Warming Potential (GWP) with a 100-year time-horizon as specified in the Kyoto Protocol. Two weaknesses of this approach are (1) the exclusion of short-lived climate forcers (SLCFs) and biophysical factors despite their established importance, and (2) the use of a particular emission metric (GWP) with a choice of specific time-horizons (20, 100, and 500 years). The GWP and the three time-horizons were based on an illustrative example with value judgments and vague interpretations. Here we illustrate, using LCA data of the transportation sector, the importance of SLCFs relative to LLGHGs, different emission metrics, and different treatments of time. We find that both the inclusion of SLCFs and the choice of emission metric can alter results and thereby change mitigation priorities. The explicit inclusion of time, both for emissions and impacts, can remove value-laden assumptions and provide additional information for impact assessments. We believe that our results show that a debate is needed in the LCA community on the impact category "global warming" covering which emissions to include, the emission metric(s) to use, and the treatment of time.

Uncertainties in life cycle assessment of waste management systems

DEFF Research Database (Denmark)

Clavreul, Julie; Christensen, Thomas Højlund

2011-01-01

Life cycle assessment has been used to assess environmental performances of waste management systems in many studies. The uncertainties inherent to its results are often pointed out but not always quantified, which should be the case to ensure a good decisionmaking process. This paper proposes...... a method to assess all parameter uncertainties and quantify the overall uncertainty of the assessment. The method is exemplified in a case study, where the goal is to determine if anaerobic digestion of organic waste is more beneficial than incineration in Denmark, considering only the impact on global...... warming. The sensitivity analysis pointed out ten parameters particularly highly influencing the result of the study. In the uncertainty analysis, the distributions of these ten parameters were used in a Monte Carlo analysis, which concluded that incineration appeared more favourable than anaerobic...

Using Virtual Reality to Assess Ethical Decisions in Road Traffic Scenarios: Applicability of Value-of-Life-Based Models and Influences of Time Pressure

Directory of Open Access Journals (Sweden)

Leon R. Sütfeld

2017-07-01

Full Text Available Self-driving cars are posing a new challenge to our ethics. By using algorithms to make decisions in situations where harming humans is possible, probable, or even unavoidable, a self-driving car's ethical behavior comes pre-defined. Ad hoc decisions are made in milliseconds, but can be based on extensive research and debates. The same algorithms are also likely to be used in millions of cars at a time, increasing the impact of any inherent biases, and increasing the importance of getting it right. Previous research has shown that moral judgment and behavior are highly context-dependent, and comprehensive and nuanced models of the underlying cognitive processes are out of reach to date. Models of ethics for self-driving cars should thus aim to match human decisions made in the same context. We employed immersive virtual reality to assess ethical behavior in simulated road traffic scenarios, and used the collected data to train and evaluate a range of decision models. In the study, participants controlled a virtual car and had to choose which of two given obstacles they would sacrifice in order to spare the other. We randomly sampled obstacles from a variety of inanimate objects, animals and humans. Our model comparison shows that simple models based on one-dimensional value-of-life scales are suited to describe human ethical behavior in these situations. Furthermore, we examined the influence of severe time pressure on the decision-making process. We found that it decreases consistency in the decision patterns, thus providing an argument for algorithmic decision-making in road traffic. This study demonstrates the suitability of virtual reality for the assessment of ethical behavior in humans, delivering consistent results across subjects, while closely matching the experimental settings to the real world scenarios in question.

Using Virtual Reality to Assess Ethical Decisions in Road Traffic Scenarios: Applicability of Value-of-Life-Based Models and Influences of Time Pressure.

Science.gov (United States)

Sütfeld, Leon R; Gast, Richard; König, Peter; Pipa, Gordon

2017-01-01

Self-driving cars are posing a new challenge to our ethics. By using algorithms to make decisions in situations where harming humans is possible, probable, or even unavoidable, a self-driving car's ethical behavior comes pre-defined. Ad hoc decisions are made in milliseconds, but can be based on extensive research and debates. The same algorithms are also likely to be used in millions of cars at a time, increasing the impact of any inherent biases, and increasing the importance of getting it right. Previous research has shown that moral judgment and behavior are highly context-dependent, and comprehensive and nuanced models of the underlying cognitive processes are out of reach to date. Models of ethics for self-driving cars should thus aim to match human decisions made in the same context. We employed immersive virtual reality to assess ethical behavior in simulated road traffic scenarios, and used the collected data to train and evaluate a range of decision models. In the study, participants controlled a virtual car and had to choose which of two given obstacles they would sacrifice in order to spare the other. We randomly sampled obstacles from a variety of inanimate objects, animals and humans. Our model comparison shows that simple models based on one-dimensional value-of-life scales are suited to describe human ethical behavior in these situations. Furthermore, we examined the influence of severe time pressure on the decision-making process. We found that it decreases consistency in the decision patterns, thus providing an argument for algorithmic decision-making in road traffic. This study demonstrates the suitability of virtual reality for the assessment of ethical behavior in humans, delivering consistent results across subjects, while closely matching the experimental settings to the real world scenarios in question.

Validation of a Modified Life-Space Assessment in Multimorbid Older Persons With Cognitive Impairment.

Science.gov (United States)

Ullrich, Phoebe; Werner, Christian; Bongartz, Martin; Kiss, Rainer; Bauer, Jürgen; Hauer, Klaus

2018-01-31

To investigate the validity, reliability, sensitivity to change, and feasibility of a modified University of Alabama at Birmingham Study of Aging Life-Space Assessment (UAB-LSA) in older persons with cognitive impairment (CI). The UAB-LSA was modified for use in persons with CI Life-Space Assessment for Persons with Cognitive Impairment (LSA-CI). Measurement properties of the LSA-CI were investigated using data of 118 multimorbid older participants with CI [mean age (SD): 82.3 (6.0) years, mean Mini-Mental State Examination score: 23.3 (2.4) points] from a randomized controlled trial (RCT) to improve motor performance and physical activity. Construct validity was asessed by Spearman's rank (rs) and point-biseral correlations (rpb) with age, gender, motor, and cognitive status, psychosocial factors, and sensor-derived (outdoor) physical activity variables. Test-retest reliability was analyzed using intra-class correlation coefficients (ICCs). Sensitivity to change was determined by standardized response means (SRMs) calculated for the RCT intervention group. The LSA-CI demonstrated moderate to high construct validity, with significant correlations of the LSA-CI scores with (outdoor) physical activity (rs = .23-.63), motor status (rs = .27-.56), fear of falling-related psychosocial variables (rs = |.24-.44|), and demographic characteristics (rpb = |.27-.32|). Test-retest reliability was good to excellent (ICC = .65-.91). Sensitivity to change was excellent for the LSA-CI composite score (SRM = .80) and small to moderate for the LSA-CI subscores (SRM = .35-.60). A completion rate of 100% and a mean completion time of 4.1 min) documented good feasibility. The LSA-CI represents a valid, reliable, sensitive, and feasible interview-based life-space assessment tool in multimorbid older persons with CI. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Life Cycle Assessment of Sugar Production (VB)

DEFF Research Database (Denmark)

Teljigovic, Mehmed; Mengiardi, Jon; Factor, Gabriela

1999-01-01

The environmental organisation NOAH has proposed carrying out an environmental assessment of two different sugar productions (using sugar beet or sugar cane) in order to illustrate which of the systems has a higher environmental impact for sugar consumption in Denmark. Therefore a comparison...... will be made between sugar from sugar beet produced in Denmark versus sugar produces from sugar cane in a tropical country, Brazil, and transported afterwards to Denmark. To evaluate the environmental aspects of these two product systems a Life Cycle Assessement (LCA) will be carried out.From the results...... obtained in the present LCA of sugar produces from sugar canes or sugar beet it is difficult to make an immediate choice between the two possibilities. Indeed, Quantitative results from the EDIP (Environmental Design of Industrial Products) software are globally similar for both ways of producing sugar...

Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges

International Nuclear Information System (INIS)

Ghosh, Jayadipta; Sood, Piyush

2016-01-01

This paper presents a methodology to develop seismic fragility curves for deteriorating highway bridges by uniquely accounting for realistic pitting corrosion deterioration and time-dependent capacity distributions for reinforced concrete columns under chloride attacks. The proposed framework offers distinct improvements over state-of-the-art procedures for fragility assessment of degrading bridges which typically assume simplified uniform corrosion deterioration model and pristine limit state capacities. Depending on the time in service life and deterioration mechanism, this study finds that capacity limit states for deteriorating bridge columns follow either lognormal distribution or generalized extreme value distributions (particularly for pitting corrosion). Impact of column degradation mechanism on seismic response and fragility of bridge components and system is assessed using nonlinear time history analysis of three-dimensional finite element bridge models reflecting the uncertainties across structural modeling parameters, deterioration parameters and ground motion. Comparisons are drawn between the proposed methodology and traditional approaches to develop aging bridge fragility curves. Results indicate considerable underestimations of system level fragility across different damage states using the traditional approach compared to the proposed realistic pitting model for chloride induced corrosion. Time-dependent predictive functions are provided to interpolate logistic regression coefficients for continuous seismic reliability evaluation along the service life with reasonable accuracy. - Highlights: • Realistic modeling of chloride induced corrosion deterioration in the form of pitting. • Time-evolving capacity distribution for aging bridge columns under chloride attacks. • Time-dependent seismic fragility estimation of highway bridges at component and system level. • Mathematical functions for continuous tracking of seismic fragility along service

A Generic Life Cycle Assessment Tool for Chemical-biochemical Processes

DEFF Research Database (Denmark)

Kalakul, Sawitree; Malakul, Pomthong; Siemanond, Kitipat

2013-01-01

As environmental impacts and resource depletion are serious concerns for the modern society, they also provide the motivation and need to design processes that are not only economically and operationally feasible, but also environmentally friendly. In this respect, life cycle assessment (LCA......) is a tool for quantifying potential environmental impacts throughout the life cycle of the product or process. It can be used in conjunction with an economic tool to evaluate the design of any existing and/or new chemical-biochemical process and create improvement options in order to arrive at the best...

Life cycle assessment. Specific indicators for Italy in impact evaluation

International Nuclear Information System (INIS)

Masoni, P.

1999-01-01

After a brief recall and a short description of the LCA (life cycle assessment) methodology, the work is focused on the impact assessment step, discussing the state of the art and a critical identification of environmental indicators, of normalization and weighting principles for the different environmental categories specific for Italy. The application methodology to a case study concerning the production of butter by the Consorzio Granterre of Modena (Italy) is also described [it

Assessment of Psychopathology and Quality of Life in Children and Adolescents With Migraine.

Science.gov (United States)

Öztop, Didem Behice; Taşdelen, Bedia İnce; PoyrazoğLu, Hatıce Gamze; Ozsoy, Saliha; Yilmaz, Rabia; Şahın, Nilfer; Per, Hüseyin; Bozkurt, Selma

2016-06-01

The aims of this study were to investigate comorbid psychiatric disorders and to identify anxiety and depression levels and quality of life in children and adolescents with migraine; and to assess their relationship with migraine. 35 patients aged 9-16 years were followed in our neurology clinic and their parents were included into the study. 35 age- and sex-matched patients were employed as the control group. In the subjects included, psychiatric disorders were assessed by using the Schedule for Affective Disorders and Schizophrenia for School Age Children-Present and Lifetime Version. All children and adolescents were assessed by using the Children's Depression Inventory, the State-Trait Anxiety Inventory and the Pediatric Quality of Life Inventory. In addition, the Pediatric Migraine Disability Assessment Tool and visual analog scale were used to identify the degree of disability and pain severity in patients with migraine. In the psychiatric assessment of children and adolescents with migraine, it was found that a psychiatric diagnosis was made in 40% of patients; and depression scale scores were significantly higher than those of controls. Quality of life was found to be poorer in patients with migraine compared to controls. It was found that quality of life was negatively correlated with pain severity and degree of disability; while it was positively correlated with depression scores. In children and adolescents with migraine, treatment of psychiatric disorders in addition to migraine therapy can facilitate migraine management and may decrease the need for prophylactic therapy. © The Author(s) 2016.

Estimating the Value of Life, Injury, and Travel Time Saved Using a Stated Preference Framework.

Science.gov (United States)

Niroomand, Naghmeh; Jenkins, Glenn P

2016-06-01

The incidence of fatality over the period 2010-2014 from automobile accidents in North Cyprus is 2.75 times greater than the average for the EU. With the prospect of North Cyprus entering the EU, many investments will need to be undertaken to improve road safety in order to reach EU benchmarks. The objective of this study is to provide local estimates of the value of a statistical life and injury along with the value of time savings. These are among the parameter values needed for the evaluation of the change in the expected incidence of automotive accidents and time savings brought about by such projects. In this study we conducted a stated choice experiment to identify the preferences and tradeoffs of automobile drivers in North Cyprus for improved travel times, travel costs, and safety. The choice of route was examined using mixed logit models to obtain the marginal utilities associated with each attribute of the routes that consumers choose. These estimates were used to assess the individuals' willingness to pay (WTP) to avoid fatalities and injuries and to save travel time. We then used the results to obtain community-wide estimates of the value of a statistical life (VSL) saved, the value of injury (VI) prevented, and the value per hour of travel time saved. The estimates for the VSL range from €315,293 to €1,117,856 and the estimates of VI from € 5,603 to € 28,186. These values are consistent, after adjusting for differences in incomes, with the median results of similar studies done for EU countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of the environmental impacts deriving from the life cycle of a typical solar water heater

Directory of Open Access Journals (Sweden)

G. Gaidajis

2014-01-01

Full Text Available According to life cycle thinking, the environmental burden deriving from different life cycle stages of a product or a system, such as manufacturing, transportation, maintenance and landfilling should be taken into consideration while assessing its environmental performance. In that aspect, the environmental impacts deriving from the life cycle of a typical solar water heater (SWH in Greece are analyzed and assessed with the application of relative life cycle assessment (LCA software in this study. In order to examine various impact categories such as global warming, ozone layer depletion, ecotoxicity and so forth, the IMPACT2002+ method is applied. The aim of this study is to examine the life cycle stages, processes and materials that significantly affect the system under examination and to provide a discussion regarding the environmental friendliness of solar water heaters.

Health related quality of life assessment in metastatic disease of the spine: a systematic review.

Science.gov (United States)

Street, John; Berven, Sigurd; Fisher, Charles; Ryken, Timothy

2009-10-15

Systematic literature review. To examine the available literature on health related quality of life (HRQOL) assessment in metastatic disease of the spine and identify the optimal functional outcome scales to be used in developing a disease-specific tool. There is a lack of consensus in the use of HRQOL measures in patients with metastatic spine disease. A systematic review was conducted using MEDLINE, EMBASE, the Science Citation Index (ISI), the Cumulative Index to Nursing and Allied Health Literature, the PsycINFO, the Allied and Complementary Medicine (AMED), Cochrane Reviews and Global Health databases for clinical studies addressing metastatic spine disease from 1966 through 2008. The validity of outcome tools was established by linkage analysis with the International Classification of Functioning Disability and Health (ICF). One hundred forty-one clinical studies met inclusion criteria including 10,347 patients. Only 5 moderate grade and 1 high grade study were identified. Thirty- four studies used a patient self-assessment instrument to assess health status. None of the instruments were validated for metastatic spine patients. The most commonly used Pi-by-no tools were SF-36, SIP 5, and the ADL. None of the studies defined health related quality of life (HRQOL) or justified the choice of instrument. The most commonly used cancer-specific tools were ECOG, EORTC QCQ-C30, and EUROQOL 5D. Based on frequency of citation and on correlation with the International Classification of Functioning Disability and Health, the ECOG and SF36 were judged as most valid and reliable. A systematic review of the available evidence suggests that valid and reliable health related quality of life measures exist for the assessment of oncology patients; however, a disease-specific tool for metastatic spine disease awaits development. Until such time as a disease-specific tool is available, we recommend that the ECOG and SF-36 be considered for use in studies addressing the outcome

Prediction of material creep behaviour for strain based life assessment applications

Energy Technology Data Exchange (ETDEWEB)

Rantala, J H; Hurst, R C [EC JRC IAM, Petten (Netherlands); Bregani, F [ENEL, Milan (Italy)

1999-12-31

In this work the idea of using constant load uniaxial creep test results instead of constant stress results for developing a CDM creep model for the P92 material is demonstrated. Due to limited availability of creep test results this work is based on incomplete test data and a general stress rupture line. In spite of these limitations a material creep model was developed for use in a FE analysis. Using P91 material as an example, a method is proposed to account for differences in strain evolution as a function of stress which normally manifests itself as lower strain values at low stresses in a normalised time-strain plot. This allows the CDM model to be used both in FE analysis and in strain-based life assessment engineering calculations. (orig.) 3 refs.

Prediction of material creep behaviour for strain based life assessment applications

Energy Technology Data Exchange (ETDEWEB)

Rantala, J.H.; Hurst, R.C. [EC JRC IAM, Petten (Netherlands); Bregani, F. [ENEL, Milan (Italy)

1998-12-31

In this work the idea of using constant load uniaxial creep test results instead of constant stress results for developing a CDM creep model for the P92 material is demonstrated. Due to limited availability of creep test results this work is based on incomplete test data and a general stress rupture line. In spite of these limitations a material creep model was developed for use in a FE analysis. Using P91 material as an example, a method is proposed to account for differences in strain evolution as a function of stress which normally manifests itself as lower strain values at low stresses in a normalised time-strain plot. This allows the CDM model to be used both in FE analysis and in strain-based life assessment engineering calculations. (orig.) 3 refs.

Human and ecological life cycle tools for the integrated assessment of systems (HELIAS)

NARCIS (Netherlands)

Guinée, Jeroen B.; Heijungs, Reinout; Kleijn, René; Van Der Voet, Ester; De Koning, Arjan; Van Oers, Lauran; Elshkaki, Ayman; Huele, Ruben; Huppes, Gjalt; Suh, Sangwon; Sleeswijk, Anneke Wegener

Goal, Scope and Background. CML has contributed to the development of life cycle decision support tools, particularly Substance/Material Flow Analysis (SFA respectively MFA) and Life Cycle Assessment (LCA). Ever since these tools emerged there have been discussions on how these tools relate to each

Social impact assessment of sugar production operations in South Africa : a social life cycle assessment perspective

OpenAIRE

2013-01-01

M.Tech. (Quality and Operations Management) This paper focuses on the social impact of the sugar industry in South Africa. A social impact assessment is a method that aims to assess social features of the product and their positive and negative aspects in terms of its processing of raw material to the final stages of its disposal. The objectives of the study were guided by the guidelines on social life cycle assessment of products of the South African Sugar Industry developed by the United...

Scoping review of pediatric tonsillectomy quality of life assessment instruments.

Science.gov (United States)

Kao, Stephen Shih-Teng; Peters, Micah D J; Dharmawardana, Nuwan; Stew, Benjamin; Ooi, Eng Hooi

2017-10-01

Sleep-disordered breathing or recurrent tonsillitis have detrimental effects on the child's physical health and quality of life. Tonsillectomy is commonly performed to treat these common conditions and improve the child's quality of life. This scoping review aims to present a comprehensive and descriptive analysis of quality of life questionnaires as a resource for clinicians and researchers when deciding which tool to use when assessing the quality of life effects after tonsillectomy. A comprehensive search strategy was undertaken across MEDLINE (PubMed), CINAHL, Embase, and Cochrane CENTRAL. Quality of life questionnaires utilized in studies investigating pediatric patients undergoing tonsillectomy for chronic tonsillitis or sleep-disordered breathing were included. Methodological quality and data extraction were conducted as per Joanna Briggs Institute methodology. Ten questionnaires were identified, consisting of six generic and four disease-specific instruments. The Pediatric Quality of Life Inventory was the most commonly utilized generic questionnaire. The Obstructive Sleep Apnea-18 was the most commonly utilized disease-specific questionnaire. This review identified a range of generic and disease-specific quality of life questionnaires utilized in pediatric patients who have undergone tonsillectomy with or without adenoidectomy for sleep-disordered breathing or chronic tonsillitis. Important aspects of each questionnaire have been summarized to aid researchers and clinicians in choosing the appropriate questionnaire when evaluating the quality of life effects of tonsillectomy. NA Laryngoscope, 127:2399-2406, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

Inspection procedure of buildings for the purpose of subsequent assessment of their residual life

Directory of Open Access Journals (Sweden)

Zolina Tat’yana Vladimirovna

2014-12-01

Full Text Available This paper considers and asserts the need to obtain the results of inspection of a building at the stage of its commissioning in order to apply comprehensive methodology for assessing its residual life. The author proposes to build regression relationship by correlating the levels of the time series dynamics of stress at certain points of the object calculation scheme considering the results of subsequent surveys. It allows estimating the wear rate of structural elements. The assessment of the reliability and durability of the building frame in a deterministic form is based on the limit states method. The application of this method allows taking into account the random nature of not only the combination of existing loads, but also the strength properties of construction materials by creating a system of safety factors.

Life time evaluation of spectrum loaded machine parts

Energy Technology Data Exchange (ETDEWEB)

Rabb, R. [Waertsilae NSD Corporation, Vaasa (Finland)

1998-12-31

In a medium speed diesel engine there are some important components, such as the cylinder head, the piston and the cylinder liner, which are subjected to a specific load spectrum consisting of mainly two distinct parts. One is the low cycle part which is due to the temperature field that builds up after that the engine has been started. This low cycle part causes a big stress amplitude but consists of only a couple of thousand cycles during the engine life time. The other part of the load spectrum is the high cycle part due to the firing pressure. The high cycle part has a smaller amplitude but consists of billions of cycles during the engine life time. The cylinder head and the cylinder liner are made of cast iron. In this investigation the true extension into the high cycle domain of the S-N curve for grey cast iron grade 300/ISO 185 was established through fatigue tests with a load spectrum resembling the existing one. This testing resulted in much new and improved knowledge about the fatigue properties of grey cast iron and it was even possible to generalize the outcome of the spectrum fatigue tests into a simple design curve. (orig.) 11 refs.

Vacuum Drying for Extending Litchi Shelf-Life: Vitamin C, Total Phenolics, Texture and Shelf-Life Assessment.

Science.gov (United States)

Richter Reis, Felipe; de Oliveira, Aline Caroline; Gadelha, Gabriella Giani Pieretti; de Abreu, Marcela Breves; Soares, Hillary Isabelle

2017-06-01

In an attempt to obtain shelf-stable litchi fruit with preserved nutritional quality and good sensory features, quarters of peeled and pitted fruits were vacuum dried at 50, 60 and 70 °C at a constant pressure of 8.0 kPa. The product was assessed for its vitamin C, total phenolics and texture (hardness). In addition, the product with the best texture was assessed for its shelf-life by means of accelerated testing. Results suggest that vacuum dried litchi retained almost 70% of the vitamin C and total phenolics when compared to frozen fruits (control). Vitamin C and phenolic compounds content significantly decreased with drying, while no difference was found between different drying temperatures. Hardness increased with drying temperature. The sample dried at 70 °C presented crispness, which is a desired quality feature in dried fruit products. This sample was subjected to shelf-life evaluation, whose result suggests a shelf-life of eight months at 23 °C. Total color change (CIE ΔE 00 ) was the expiry criterion. Vacuum drying was a suitable technique for producing shelf-stable litchi fruit with good texture while preserving its desirable original nutrients. Consumption of vacuum dried litchi may be beneficial to health due to its remarkable content of phenolic compounds and vitamin C.

Is Time a creation of Life in response to Gravity? : This hypothesis suggests new ways for looking at extraterrestrial life

NARCIS (Netherlands)

Ockels, W.J.

2007-01-01

From his personal experience during a space flight (Challenger 1985) onward, the author has been struck repeatedly by the remarkable influence of Earth's environment on life, in particular by its most inevitable elements: time and gravity. Our life might be peculiar to the local Earth conditions,

A study on the environmental impact analysis with life cycle assessment of O and M in NPP

International Nuclear Information System (INIS)

Jeong, H. S.; Kim, S. S.; Yoon, S. W.; Yang, M. H.; Kim, H. Z.

2002-01-01

In the modern times, characterized by mass-consumption, technologies have to evaluated not only in terms of usefulness but also in the aspects of resources exhaustion and environmental destruction. This study quantified environmental burdens from the stage of operation and maintenance in selected nuclear power plants. Four factors are evaluated, such as green house gas, hydrosphere, atmosphere and resources exhaustion for the selected PWR and PHWR with life cycle assessment(LCA)

Representativeness of environmental impact assessment methods regarding Life Cycle Inventories.

Science.gov (United States)

Esnouf, Antoine; Latrille, Éric; Steyer, Jean-Philippe; Helias, Arnaud

2018-04-15

Life Cycle Assessment (LCA) characterises all the exchanges between human driven activities and the environment, thus representing a powerful approach for tackling the environmental impact of a production system. However, LCA practitioners must still choose the appropriate Life Cycle Impact Assessment (LCIA) method to use and are expected to justify this choice: impacts should be relevant facing the concerns of the study and misrepresentations should be avoided. This work aids practitioners in evaluating the adequacy between the assessed environmental issues and studied production system. Based on a geometrical standpoint of LCA framework, Life Cycle Inventories (LCIs) and LCIA methods were localized in the vector space spanned by elementary flows. A proximity measurement, the Representativeness Index (RI), is proposed to explore the relationship between those datasets (LCIs and LCIA methods) through an angular distance. RIs highlight LCIA methods that measure issues for which the LCI can be particularly harmful. A high RI indicates a close proximity between a LCI and a LCIA method, and highlights a better representation of the elementary flows by the LCIA method. To illustrate the benefits of the proposed approach, representativeness of LCIA methods regarding four electricity mix production LCIs from the ecoinvent database are presented. RIs for 18 LCIA methods (accounting for a total of 232 impact categories) were calculated on these LCIs and the relevance of the methods are discussed. RIs prove to be a criterion for distinguishing the different LCIA methods and could thus be employed by practitioners for deeper interpretations of LCIA results. Copyright © 2017 Elsevier B.V. All rights reserved.

Recommendations for Life Cycle Impact Assessment in the European context - based on existing environmental impact assessment models and factors (International Reference Life Cycle Data System - ILCD handbook)

OpenAIRE

HAUSCHILD Michael; GOEDKOOP Mark; GUINEE Jerome; HEIJUNGS Reinout; HUIJBREGTS Mark; JOLLIET Olivier; MARGNI Manuele; DE SCHRYVER An

2010-01-01

To achieve more sustainable production and consumption patterns, we must consider the environmental implications of the whole supply-chain of products, both goods and services, their use, and waste management, i.e. their entire life cycle from ¿cradle to grave¿. In the Communication on Integrated Product Policy (IPP), (EC, 2003), the European Commission committed to produce a handbook on best practice in Life Cycle Assessment (LCA). The Sustainable Consumption and Production (SCP) Action ...

Life cycle assessment of a commercial rainwater harvesting system compared with a municipal water supply system

Science.gov (United States)

Building upon previously published life cycle assessment (LCA) methodologies, we conducted an LCA of a commercial rainwater harvesting (RWH) system and compared it to a municipal water supply (MWS) system adapted to Washington, D.C. Eleven life cycle impact assessment (LCIA) indi...

Gate-to-Gate Life Cycle Assessment for Determining Carbon Footprint of Catalytic Converter Assembly Process

Directory of Open Access Journals (Sweden)

A. N. Mustfizul Karim

2017-03-01

Full Text Available With the pursuit of embracing the circular economy, having upward trend in vehicle sales and environmental concern, sustainability has become an imperative part of the global automotive manufacturing strategies. One of the tactics to achieve this sustainable goal is to conserve and enhance the resource base by salvaging the embedded values from end-of-life product and for which, the remanufacturing can be considered as one of the most prominent epitome. Even though many of the auto parts like engine, transmissions, starters, alternators and etc. have been assessed for remanufacturability since last few decades, being a major component of a car body the Catalytic Converter (CC still remains unfocused in literature. However, to examine the remanufacturability of CC, a comprehensive study for assessing its economic, social, and environmental impact is inevitable. Therefore, with an underlying aim of designing the remanufacturable CC, in this endeavour an attempt has made to evaluate the environmental impact of its welding operations by means of energy consumption through gate-to-gate life cycle assessment. Real life data are collected from a Local Malaysian CC manufacturer. The obtained results show that the welding section has a carbon footprint of 0.203 kgCO2e/unit with major emission coming from the plasma arc welding. In addition to that, it is also observed that the value of carbon footprint is not only sensitive to the emission factor and processing time, but also it is responsive to the nature of the processing operations. Certainly, this observation will motivate to change the product design from the prospect of remanufacturing.

Global life satisfaction predicts ambulatory affect, stress, and cortisol in daily life in working adults.

Science.gov (United States)

Smyth, Joshua M; Zawadzki, Matthew J; Juth, Vanessa; Sciamanna, Christopher N

2017-04-01

Global life satisfaction has been linked with long-term health advantages, yet how life satisfaction impacts the trajectory of long-term health is unclear. This paper examines one such possible mechanism-that greater life satisfaction confers momentary benefits in daily life that accumulate over time. A community sample of working adults (n = 115) completed a measure of life satisfaction and then three subsequent days of ecological momentary assessment surveys (6 times/day) measuring affect (i.e., emotional valence, arousal), and perceived stress, and also provided salivary cortisol samples. Multilevel models indicated that people with higher (vs. lower) levels of life satisfaction reported better momentary affect, less stress, marginally lower momentary levels and significantly altered diurnal slopes of cortisol. Findings suggest individuals with high global life satisfaction have advantageous daily experiences, providing initial evidence for potential mechanisms through which global life satisfaction may help explain long-term health benefits.

Accident risk-based life cycle assessment methodology for green and safe fuel selection

NARCIS (Netherlands)

Khakzad, Sina; Khan, Faisal; Abbassi, Rouzbeh; Khakzad Rostami, N.

2017-01-01

Using the emissions produced during the entire life-cycle of a fuel or a product, Life-cycle assessment (LCA) is an effective technique widely used to estimate environmental impacts. However, most of the conventional LCA methods consider the impacts of voluntary releases such as discharged toxic

Life cycle assessment of crystalline photovoltaics in the Swiss ecoinvent database

Energy Technology Data Exchange (ETDEWEB)

Jungbluth, Niels [ESU-services, Environmental Consultancy for Business and Authorities, Uster (Switzerland)

2005-07-01

This paper describes the life cycle assessment (LCA) for photovoltaic (PV) power plants in the new ecoinvent database. Twelve different, grid-connected photovoltaic systems were studied for the situation in Switzerland in the year 2000. They are manufactured as panels or laminates, from monocrystalline or polycrystalline silicon, installed on facades, slanted or flat roofs, and have 3 kW{sub p} capacity. The process data include quartz reduction, silicon purification, wafer, panel and laminate production, mounting structure, 30 years operation and dismantling. In contrast to existing LCA studies, country-specific electricity mixes have been considered in the life cycle inventory (LCI) in order to reflect the present market situation. The new approach for the allocation procedure in the inventory of silicon purification, as a critical issue of former studies, is discussed in detail. The LCI for photovoltaic electricity shows that each production stage is important for certain elementary flows. A life cycle impact assessment (LCIA) shows that there are important environmental impacts not directly related to the energy use (e.g., process emissions of NO{sub x} from wafer etching). The assumption for the used supply energy mixes is important for the overall LCIA results of different production stages. The presented life cycle inventories for photovoltaic power plants are representative for newly constructed plants and for the average photovoltaic mix in Switzerland in the year 2000. A scenario for a future technology (until 2010) helps to assess the relative influence of technology improvements for some processes. The very detailed ecoinvent database forms a good basis for similar studies in other European countries or for other types of solar cells. (Author)

Wind turbine blade life-time assessment model for preventive planning of operation and maintenance

DEFF Research Database (Denmark)

Florian, Mihai; Sørensen, John Dalsgaard

2014-01-01

Out of the total wind turbine failure events, blade damage accounts for a substantial part, with some studies estimating it at around 23%. Current operation and maintenance (O&M) practices typically make use of corrective type maintenance as the basic approach, implying high costs for repair...... of information on the blades structural health to the decision maker. Further, inspections of the blades are often performed in connection with service. In light of the obtained information, a preventive type of maintenance becomes feasible, with the potential of predicting the blades remaining life to support O......&M decisions for avoiding major failure events. The present paper presents a fracture mechanics based model for estimating the remaining life of a wind turbine blade, focusing on the crack propagation in the blades adhesive joints. A generic crack propagation model is built in Matlab based on a Paris law...

Wind Turbine Blade Life-Time Assessment Model for Preventive Planning of Operation and Maintenance

DEFF Research Database (Denmark)

Florian, Mihai; Sørensen, John Dalsgaard

2015-01-01

Out of the total wind turbine failure events, blade damage accounts for a substantial part, with some studies estimating it at around 23%. Current operation and maintenance (O&M) practices typically make use of corrective type maintenance as the basic approach, implying high costs for repair...... of information on the blades structural health to the decision maker. Further, inspections of the blades are often performed in connection with service. In light of the obtained information, a preventive type of maintenance becomes feasible, with the potential of predicting the blades remaining life to support O......&M decisions for avoiding major failure events. The present paper presents a fracture mechanics based model for estimating the remaining life of a wind turbine blade, focusing on the crack propagation in the blades adhesive joints. A generic crack propagation model is built in Matlab based on a Paris law...

Life-Cycle Assessment of Cookstove Fuels in India and China

Science.gov (United States)

A life cycle assessment (LCA) was conducted to compare the environmental footprint of current and possible fuels used for cooking within China and India. Current fuel mix profiles are compared to scenarios of projected differences in and/or cleaner cooking fuels. Results are repo...

Environmental assessment of waste incineration in a life-cycle-perspective (EASEWASTE).

Science.gov (United States)

Riber, Christian; Bhander, Gurbakhash S; Christensen, Thomas H

2008-02-01

A model for life-cycle assessment of waste incinerators is described and applied to a case study for illustrative purposes. As life-cycle thinking becomes more integrated into waste management, quantitative tools for assessing waste management technologies are needed. The presented model is a module in the life-cycle assessment model EASEWASTE. The module accounts for all uses of materials and energy and credits the incinerator for electricity and heat recovered. The energy recovered is defined by the user as a percentage of the energy produced, calculated on the lower heating value of the wet waste incinerated. Emissions are either process-specific (related to the amount of waste incinerated) or input-specific (related to the composition of the waste incinerated), while mass transfer to solid outputs are governed by transfer coefficients specified by the user. The waste input is defined by 48 material fractions and their chemical composition. The model was used to quantify the environmental performance of the incineration plant in Aarhus, Denmark before and after its upgrading in terms of improved flue gas cleaning and energy recovery. It demonstrated its usefulness in identifying the various processes and substances that contributed to environmental loadings as well as to environmental savings. The model was instrumental in demonstrating the importance of the energy recovery system not only for electricity but also heat from the incinerator.