Recriticality analyses for CAPRA cores

International Nuclear Information System (INIS)

Maschek, W.; Thiem, D.

1995-01-01

The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

Recriticality analyses for CAPRA cores

Energy Technology Data Exchange (ETDEWEB)

Maschek, W.; Thiem, D.

1995-08-01

The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

Chloroplast phylogenomic analyses resolve deep-level relationships of an intractable bamboo tribe Arundinarieae (poaceae).

Science.gov (United States)

Ma, Peng-Fei; Zhang, Yu-Xiao; Zeng, Chun-Xia; Guo, Zhen-Hua; Li, De-Zhu

2014-11-01

The temperate woody bamboos constitute a distinct tribe Arundinarieae (Poaceae: Bambusoideae) with high species diversity. Estimating phylogenetic relationships among the 11 major lineages of Arundinarieae has been particularly difficult, owing to a possible rapid radiation and the extremely low rate of sequence divergence. Here, we explore the use of chloroplast genome sequencing for phylogenetic inference. We sampled 25 species (22 temperate bamboos and 3 outgroups) for the complete genome representing eight major lineages of Arundinarieae in an attempt to resolve backbone relationships. Phylogenetic analyses of coding versus noncoding sequences, and of different regions of the genome (large single copy and small single copy, and inverted repeat regions) yielded no well-supported contradicting topologies but potential incongruence was found between the coding and noncoding sequences. The use of various data partitioning schemes in analysis of the complete sequences resulted in nearly identical topologies and node support values, although the partitioning schemes were decisively different from each other as to the fit to the data. Our full genomic data set substantially increased resolution along the backbone and provided strong support for most relationships despite the very short internodes and long branches in the tree. The inferred relationships were also robust to potential confounding factors (e.g., long-branch attraction) and received support from independent indels in the genome. We then added taxa from the three Arundinarieae lineages that were not included in the full-genome data set; each of these were sampled for more than 50% genome sequences. The resulting trees not only corroborated the reconstructed deep-level relationships but also largely resolved the phylogenetic placements of these three additional lineages. Furthermore, adding 129 additional taxa sampled for only eight chloroplast loci to the combined data set yielded almost identical

GIS-based Approaches to Catchment Area Analyses of Mass Transit

DEFF Research Database (Denmark)

Andersen, Jonas Lohmann Elkjær; Landex, Alex

2009-01-01

Catchment area analyses of stops or stations are used to investigate potential number of travelers to public transportation. These analyses are considered a strong decision tool in the planning process of mass transit especially railroads. Catchment area analyses are GIS-based buffer and overlay...... analyses with different approaches depending on the desired level of detail. A simple but straightforward approach to implement is the Circular Buffer Approach where catchment areas are circular. A more detailed approach is the Service Area Approach where catchment areas are determined by a street network...... search to simulate the actual walking distances. A refinement of the Service Area Approach is to implement additional time resistance in the network search to simulate obstacles in the walking environment. This paper reviews and compares the different GIS-based catchment area approaches, their level...

DETERMINATION OF LEVEL OF FOOD ADDITIVES IN Labisia pumila (LP BEVERAGES CONSUMED IN KUANTAN, MALAYSIA

Directory of Open Access Journals (Sweden)

Ade Chandra Iwansyah

2013-03-01

Full Text Available The content levels of several food additives (gallic acid, benzoic acid and caffeine in commercial Labisia pumila (LP beverage samples in Kuantan, Malaysia were determined by high performances liquid chromatography (HPLC. These analytical measurements were undertaken primarily to assess the compliance of content levels of the investigated food additives and their daily intake doses with permissible levels. The results obtained from this study indicated that the average levels of GA, caffeine and benzoic acid in the analyzed beverages were 37.62-229.35 ppm, 43.46 -168.00 ppm and 98.10-241.13 ppm, respectively. In addition, the concentrations of these food additives have been converted into daily intake doses based on beverage consumption. It was estimated that the mean daily intake of GA, caffeine and benzoic acid  by the adult population of Kuantan through the consumption of the analyzed beverages  were 0.39 mg/kg body weight/day for GA, 0.59 mg/kg body weight/day for caffeine (19.6 % ADI and 0.43 mg/kg body weight/day for benzoic acid (8.6%ADI. None of the analyzed beverage sample was found to violate the current legal limits as stipulated in Malaysian food regulation.   Keywords: beverages, daily intake, food additives, Labisia pumila

Economic and social analyses at a regional level in the light of competitiveness

Directory of Open Access Journals (Sweden)

Nicoleta Maria Gogâltan

2014-12-01

Full Text Available In most economic studies, competitiveness is considered a key issue of the political success failure. A major element which contributes to regional inequalities is the level of competitiveness. This element has been the subject of numerous studies over the past years, even though more attention was given to the national level and less to the regional one. Moreover, the purpose of these regional analyses is the correlation of territorial objectives and problems with possible sources of financing, seeing to ensure optimal combinations between regional demand and supply, the optimal distribution of the income and of the results obtained, regional competitiveness, the location of clusters, etc.

Barriers to Uptake of Conservation Agriculture in southern Africa: Multi-level Analyses from Malawi

Science.gov (United States)

Dougill, Andrew; Stringer, Lindsay; Whitfield, Stephen; Wood, Ben; Chinseu, Edna

2015-04-01

Conservation agriculture is a key set of actions within the growing body of climate-smart agriculture activities being advocated and rolled out across much of the developing world. Conservation agriculture has purported benefits for environmental quality, food security and the sustained delivery of ecosystem services. In this paper, new multi-level analyses are presented, assessing the current barriers to adoption of conservation agriculture practices in Malawi. Despite significant donor initiatives that have targeted conservation agriculture projects, uptake rates remain low. This paper synthesises studies from across 3 levels in Malawi: i.) national level- drawing on policy analysis, interviews and a multi-stakeholder workshop; ii.) district level - via assessments of development plans and District Office and extension service support, and; iii) local level - through data gained during community / household level studies in Dedza District that have gained significant donor support for conservation agriculture as a component of climate smart agriculture initiatives. The national level multi-stakeholder Conservation Agriculture workshop identified three areas requiring collaborative research and outlined routes for the empowerment of the National Conservation Agriculture Task Force to advance uptake of conservation agriculture and deliver associated benefits in terms of agricultural development, climate adaptation and mitigation. District level analyses highlight that whilst District Development Plans are now checked against climate change adaptation and mitigation criteria, capacity and knowledge limitations exist at the District level, preventing project interventions from being successfully up-scaled. Community level assessments highlight the need for increased community participation at the project-design phase and identify a pressing requirement for conservation agriculture planning processes (in particular those driven by investments in climate

Supplemental Performance Analyses for Igneous Activity and Human Intrusion at the Potential High-Level Nuclear Waste Repository at Yucca Mountain

International Nuclear Information System (INIS)

Swift, P.; Gaither, K.; Freeze, G.; McCord, J.; Kalinich, D.; Saulnier, G.; Statham, W.

2002-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for the potential development of a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. Consequences of hypothetical disruption of the Yucca Mountain site by igneous activity or human intrusion have been evaluated in the Yucca Mountain Science and Engineering Report (S and ER) (1), which presents technical information supporting the consideration of the possible site recommendation. Since completion of the S and ER, supplemental analyses have examined possible impacts of new information and alternative assumptions on the estimates of the consequences of these events. Specifically, analyses of the consequences of igneous disruption address uncertainty regarding: (1) the impacts of changes in the repository footprint and waste package spacing on the probability of disruption; (2) impacts of alternative assumptions about the appropriate distribution of future wind speeds to use in the analysis; (3) effects of alternative assumptions about waste particle sizes; and (4) alternative assumptions about the number of waste packages damaged by igneous intrusion; and (5) alternative assumptions about the exposure pathways and the biosphere dose conversion factors used in the analysis. Additional supplemental analyses, supporting the Final Environmental Impact Statement (FEIS), have examined the results for both igneous disruption and human intrusion, recalculated for a receptor group located 18 kilometers (km) from the repository (the location specified in 40 CFR 197), rather than at the 20 km distance used in the S and ER analyses

Sampling and analyses of SRP high-level waste sludges

International Nuclear Information System (INIS)

Stone, J.A.; Kelley, J.A.; McMillan, T.S.

1976-08-01

Twelve 3-liter samples of high-heat waste sludges were collected from four Savannah River Plant waste tanks with a hydraulically operated sample collector of unique design. Ten of these samples were processed in Savannah River Laboratory shielded cell facilities, yielding 5.3 kg of washed, dried sludge products for waste solidification studies. After initial drying, each batch was washed by settling and decantation to remove the bulk of soluble salts and then was redried. Additional washes were by filtration, followed by final drying. Conclusions from analyses of samples taken during the processing steps were: (a) the raw sludges contained approximately 80 wt percent soluble salts, most of which were removed by the washes; (b) 90 Sr and 238 , 239 Pu remained in the sludges, but most of the 137 Cs was removed by washing; (c) small amounts of sodium, sulfate, and 137 Cs remained in the sludges after thorough washing; (d) no significant differences were found in sludge samples taken from different risers of one waste tank. Chemical and radiometric compositions of the sludge product from each tank were determined. The sludges had diverse compositions, but iron, manganese, aluminum, and uranium were principal elements in each sludge. 90 Sr was the predominant radionuclide in each sludge product

A chip-level modeling approach for rail span collapse and survivability analyses

International Nuclear Information System (INIS)

Marvis, D.G.; Alexander, D.R.; Dinger, G.L.

1989-01-01

A general semiautomated analysis technique has been developed for analyzing rail span collapse and survivability of VLSI microcircuits in high ionizing dose rate radiation environments. Hierarchical macrocell modeling permits analyses at the chip level and interactive graphical postprocessing provides a rapid visualization of voltage, current and power distributions over an entire VLSIC. The technique is demonstrated for a 16k C MOS/SOI SRAM and a CMOS/SOS 8-bit multiplier. The authors also present an efficient method to treat memory arrays as well as a three-dimensional integration technique to compute sapphire photoconduction from the design layout

Addition of Garlic Extract in Ration to Reduce Cholesterol Level of Broiler

Science.gov (United States)

Utami, M. M. D.; Pantaya, D.; Agus, A.

2018-01-01

The purpose of this research is to know the effect of garlic extract (GE) in reducing cholesterol level of broiler chicken by analyzing cholesterol level of broiler chicken blood. Two hundred one day broiler age were used in this study for 35 days. The chickens were randomly divided into four treatments, each treatment consist of five replications and each repetition consist of ten chickens. This research is used completely randomized design, such as: T0: 0% EBP, T1: 2%, T2: 4% and T3: 6%. Furthermore, at age 35 days each chicken was taken blood to be analyzed cholesterol levels, low density lipoprotein (LDL), high density lipoprotein (HDL) and calculated the ratio of LDL and HDL levels. The data obtained were analyzed using software from Statistical Product and Service Solution (SPSS 16.0). The results of significant analysis continued by Duncan’s New Multiple Range Test. Addition of GE from the 2% level decreases (P <0.05) of LDL and total cholesterol, and increases HDL and HDL-LDL ratio. The conclusions is obtained garlic extract plays an important role in lowering cholesterol levels of broiler meat.

Formulation of SYNROC-D additives for Savannah River Plant high-level radioactive waste

International Nuclear Information System (INIS)

Ryerson, F.J.; Burr, K.; Rozsa, R.

1981-12-01

SYNROC-D is a multiphase ceramic waste form consisting of nepheline, zirconolite, perovskite, and spinel. It has been formulated for the immobilization of high-level radioactive wastes now stored at Savannah River Plant (SRP) near Aiken, South Carolina. This report utilizes existing experimental data to develop a method for calculating additives to these waste products. This method calculates additions based on variations of mineral compositions as a function of sludge composition and radionuclide partitioning among the SYNROC phases. Based on these calculations, a FORTRAN program called ADSYN has been developed to determine the proper reagent proportions to be added to the SRP sludges

Development of SAGE, A computer code for safety assessment analyses for Korean Low-Level Radioactive Waste Disposal

International Nuclear Information System (INIS)

Zhou, W.; Kozak, Matthew W.; Park, Joowan; Kim, Changlak; Kang, Chulhyung

2002-01-01

This paper describes a computer code, called SAGE (Safety Assessment Groundwater Evaluation) to be used for evaluation of the concept for low-level waste disposal in the Republic of Korea (ROK). The conceptual model in the code is focused on releases from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. Doses can be calculated for several biosphere systems including drinking contaminated groundwater, and subsequent contamination of foods, rivers, lakes, or the ocean by that groundwater. The flexibility of the code will permit both generic analyses in support of design and site development activities, and straightforward modification to permit site-specific and design-specific safety assessments of a real facility as progress is made toward implementation of a disposal site. In addition, the code has been written to easily interface with more detailed codes for specific parts of the safety assessment. In this way, the code's capabilities can be significantly expanded as needed. The code has the capability to treat input parameters either deterministic ally or probabilistic ally. Parameter input is achieved through a user-friendly Graphical User Interface.

Assessment of Tools and Data for System-Level Dynamic Analyses

International Nuclear Information System (INIS)

Piet, Steven J.; Soelberg, Nick R.

2011-01-01

The only fuel cycle for which dynamic analyses and assessments are not needed is the null fuel cycle - no nuclear power. For every other concept, dynamic analyses are needed and can influence relative desirability of options. Dynamic analyses show how a fuel cycle might work during transitions from today's partial fuel cycle to something more complete, impact of technology deployments, location of choke points, the key time lags, when benefits can manifest, and how well parts of fuel cycles work together. This report summarizes the readiness of existing Fuel Cycle Technology (FCT) tools and data for conducting dynamic analyses on the range of options. VISION is the primary dynamic analysis tool. Not only does it model mass flows, as do other dynamic system analysis models, but it allows users to explore various potential constraints. The only fuel cycle for which constraints are not important are those in concept advocates PowerPoint presentations; in contrast, comparative analyses of fuel cycles must address what constraints exist and how they could impact performance. The most immediate tool need is extending VISION to the thorium/U233 fuel cycle. Depending on further clarification of waste management strategies in general and for specific fuel cycle candidates, waste management sub-models in VISION may need enhancement, e.g., more on 'co-flows' of non-fuel materials, constraints in waste streams, or automatic classification of waste streams on the basis of user-specified rules. VISION originally had an economic sub-model. The economic calculations were deemed unnecessary in later versions so it was retired. Eventually, the program will need to restore and improve the economics sub-model of VISION to at least the cash flow stage and possibly to incorporating cost constraints and feedbacks. There are multiple sources of data that dynamic analyses can draw on. In this report, 'data' means experimental data, data from more detailed theoretical or empirical

Assessment of Tools and Data for System-Level Dynamic Analyses

Energy Technology Data Exchange (ETDEWEB)

Steven J. Piet; Nick R. Soelberg

2011-06-01

The only fuel cycle for which dynamic analyses and assessments are not needed is the null fuel cycle - no nuclear power. For every other concept, dynamic analyses are needed and can influence relative desirability of options. Dynamic analyses show how a fuel cycle might work during transitions from today's partial fuel cycle to something more complete, impact of technology deployments, location of choke points, the key time lags, when benefits can manifest, and how well parts of fuel cycles work together. This report summarizes the readiness of existing Fuel Cycle Technology (FCT) tools and data for conducting dynamic analyses on the range of options. VISION is the primary dynamic analysis tool. Not only does it model mass flows, as do other dynamic system analysis models, but it allows users to explore various potential constraints. The only fuel cycle for which constraints are not important are those in concept advocates PowerPoint presentations; in contrast, comparative analyses of fuel cycles must address what constraints exist and how they could impact performance. The most immediate tool need is extending VISION to the thorium/U233 fuel cycle. Depending on further clarification of waste management strategies in general and for specific fuel cycle candidates, waste management sub-models in VISION may need enhancement, e.g., more on 'co-flows' of non-fuel materials, constraints in waste streams, or automatic classification of waste streams on the basis of user-specified rules. VISION originally had an economic sub-model. The economic calculations were deemed unnecessary in later versions so it was retired. Eventually, the program will need to restore and improve the economics sub-model of VISION to at least the cash flow stage and possibly to incorporating cost constraints and feedbacks. There are multiple sources of data that dynamic analyses can draw on. In this report, 'data' means experimental data, data from more detailed

Inequity in maternal health care service utilization in Gujarat: analyses of district-level health survey data.

Science.gov (United States)

Saxena, Deepak; Vangani, Ruchi; Mavalankar, Dileep V; Thomsen, Sarah

2013-03-06

Two decades after the launch of the Safe Motherhood campaign, India still accounts for at least a quarter of maternal death globally. Gujarat is one of the most economically developed states of India, but progress in the social sector has not been commensurate with economic growth. The purpose of this study was to use district-level data to gain a better understanding of equity in access to maternal health care and to draw the attention of the policy planers to monitor equity in maternal care. Secondary data analyses were performed among 7,534 ever-married women who delivered since January 2004 in the District Level Household and Facility Survey (DLHS-3) carried out during 2007-2008 in Gujarat, India. Based on the conceptual framework designed by the Commission on the Social Determinants of Health, associations were assessed between three outcomes - Institutional delivery, antenatal care (ANC), and use of modern contraception - and selected intermediary and structural determinants of health using multiple logistic regression. Inequities in maternal health care utilization persist in Gujarat. Structural determinants like caste group, wealth, and education were all significantly associated with access to the minimum three antenatal care visits, institutional deliveries, and use of any modern method of contraceptive. There is a significant relationship between being poor and access to less utilization of ANC services independent of caste category or residence. Poverty is the most important determinant of non-use of maternal health services in Gujarat. In addition, social position (i.e. caste) has a strong independent effect on maternal health service use. More focused and targeted efforts towards these disadvantaged groups needs to be taken at policy level in order to achieve targets and goals laid out as per the MDGs. In particular, the Government of Gujarat should invest more in basic education and infrastructural development to begin to remove the structural causes

Inequity in maternal health care service utilization in Gujarat: analyses of district-level health survey data

Directory of Open Access Journals (Sweden)

Dileep V. Mavalankar

2013-03-01

Full Text Available Background: Two decades after the launch of the Safe Motherhood campaign, India still accounts for at least a quarter of maternal death globally. Gujarat is one of the most economically developed states of India, but progress in the social sector has not been commensurate with economic growth. The purpose of this study was to use district-level data to gain a better understanding of equity in access to maternal health care and to draw the attention of the policy planers to monitor equity in maternal care. Methods: Secondary data analyses were performed among 7,534 ever-married women who delivered since January 2004 in the District Level Household and Facility Survey (DLHS-3 carried out during 2007–2008 in Gujarat, India. Based on the conceptual framework designed by the Commission on the Social Determinants of Health, associations were assessed between three outcomes – Institutional delivery, antenatal care (ANC, and use of modern contraception – and selected intermediary and structural determinants of health using multiple logistic regression. Results: Inequities in maternal health care utilization persist in Gujarat. Structural determinants like caste group, wealth, and education were all significantly associated with access to the minimum three antenatal care visits, institutional deliveries, and use of any modern method of contraceptive. There is a significant relationship between being poor and access to less utilization of ANC services independent of caste category or residence. Discussion and conclusions: Poverty is the most important determinant of non-use of maternal health services in Gujarat. In addition, social position (i.e. caste has a strong independent effect on maternal health service use. More focused and targeted efforts towards these disadvantaged groups needs to be taken at policy level in order to achieve targets and goals laid out as per the MDGs. In particular, the Government of Gujarat should invest more in basic

FY01 Supplemental Science and Performance Analyses, Volume 1: Scientific Bases and Analyses, Part 1 and 2

International Nuclear Information System (INIS)

Dobson, David

2001-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S and ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S and ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S and ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23 013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054] [DIRS 124754]). By making the large amount of information developed on Yucca Mountain available in stages, the DOE intends to provide the public and interested parties with time to review the available materials and to formulate

Analysing inequalities in Germany a structured additive distributional regression approach

CERN Document Server

Silbersdorff, Alexander

2017-01-01

This book seeks new perspectives on the growing inequalities that our societies face, putting forward Structured Additive Distributional Regression as a means of statistical analysis that circumvents the common problem of analytical reduction to simple point estimators. This new approach allows the observed discrepancy between the individuals’ realities and the abstract representation of those realities to be explicitly taken into consideration using the arithmetic mean alone. In turn, the method is applied to the question of economic inequality in Germany.

Fluctuations of Lake Orta water levels: preliminary analyses

Directory of Open Access Journals (Sweden)

Helmi Saidi

2016-04-01

Full Text Available While the effects of past industrial pollution on the chemistry and biology of Lake Orta have been well documented, annual and seasonal fluctuations of lake levels have not yet been studied. Considering their potential impacts on both the ecosystem and on human safety, fluctuations in lake levels are an important aspect of limnological research. In the enormous catchment of Lake Maggiore, there are many rivers and lakes, and the amount of annual precipitation is both high and concentrated in spring and autumn. This has produced major flood events, most recently in November 2014. Flood events are also frequent on Lake Orta, occurring roughly triennially since 1917. The 1926, 1951, 1976 and 2014 floods were severe, with lake levels raised from 2.30 m to 3.46 m above the hydrometric zero. The most important event occurred in 1976, with a maximum level equal to 292.31 m asl and a return period of 147 years. In 2014 the lake level reached 291.89 m asl and its return period was 54 years. In this study, we defined trends and temporal fluctuations in Lake Orta water levels from 1917 to 2014, focusing on extremes. We report both annual maximum and seasonal variations of the lake water levels over this period. Both Mann-Kendall trend tests and simple linear regression were utilized to detect monotonic trends in annual and seasonal extremes, and logistic regression was used to detect trends in the number of flood events. Lake level decreased during winter and summer seasons, and a small but statistically non-significant positive trend was found in the number of flood events over the period. We provide estimations of return period for lake levels, a metric which could be used in planning lake flood protection measures.

Mechanical analyses on the digital behaviour of the Tokay gecko (Gekko gecko) based on a multi-level directional adhesion model

OpenAIRE

Wu, Xuan; Wang, Xiaojie; Mei, Tao; Sun, Shaoming

2015-01-01

This paper proposes a multi-level hierarchical model for the Tokay gecko (Gekko gecko) adhesive system and analyses the digital behaviour of the G. gecko under macro/meso-level scale. The model describes the structures of G. gecko's adhesive system from the nano-level spatulae to the sub-millimetre-level lamella. The G. gecko's seta is modelled using inextensible fibril based on Euler's elastica theorem. Considering the side contact of the spatular pads of the seta on the flat and rigid subst...

Enhanced critical currents in (Gd,Y)Ba2Cu3Ox superconducting tapes with high levels of Zr addition

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, V; Chen, Y; Shi, T; Liu, Y; Khatri, ND; Liu, J; Yao, Y; Xiong, X; Lei, C; Soloveichik, S; Galstyan, E; Majkic, G

2013-01-21

The critical current and structural properties of (Gd,Y)BaCuO tapes made by metal organic chemical vapor deposition (MOCVD) with Zr addition levels up to 30 at.% have been investigated. The reduction in critical current beyond the previously optimized Zr addition level of 7.5 at.% was found to be due to structural deterioration of the (Gd,Y)Ba2Cu3Ox film. By a modified MOCVD process,enhanced critical current densities have been achieved with high levels of Zr addition,including 3.83 MA cm(-2) in 15 at.% Zr- added 1.1 mu m thick film at 77 K in zero magnetic field. Critical currents as high as 1072 A/ 12 mm have been reached in (Gd,Y) BaCuO tapes with 15 at.% Zr addition at 30 K in a field of 3 T applied perpendicular to the tape,corresponding to a pinning force value of 268 GN m(-3). The enhanced critical currents achievable with a high density of nanoscale defects by employing high levels of second- phase additions enable the performance targets needed for the use of HTS tapes in coil applications involving high magnetic fields at temperatures below 50 K to be met.

Enhanced critical currents in (Gd,Y)Ba2Cu3Ox superconducting tapes with high levels of Zr addition

International Nuclear Information System (INIS)

Selvamanickam, V; Shi, T; Liu, Y; Khatri, N D; Liu, J; Yao, Y; Galstyan, E; Majkic, G; Chen, Y; Xiong, X; Lei, C; Soloveichik, S

2013-01-01

The critical current and structural properties of (Gd,Y)BaCuO tapes made by metal organic chemical vapor deposition (MOCVD) with Zr addition levels up to 30 at.% have been investigated. The reduction in critical current beyond the previously optimized Zr addition level of 7.5 at.% was found to be due to structural deterioration of the (Gd,Y)Ba 2 Cu 3 O x film. By a modified MOCVD process, enhanced critical current densities have been achieved with high levels of Zr addition, including 3.83 MA cm −2 in 15 at.% Zr-added 1.1 μm thick film at 77 K in zero magnetic field. Critical currents as high as 1072 A/12 mm have been reached in (Gd,Y)BaCuO tapes with 15 at.% Zr addition at 30 K in a field of 3 T applied perpendicular to the tape, corresponding to a pinning force value of 268 GN m −3 . The enhanced critical currents achievable with a high density of nanoscale defects by employing high levels of second-phase additions enable the performance targets needed for the use of HTS tapes in coil applications involving high magnetic fields at temperatures below 50 K to be met. (paper)

Mind the level: problems with two recent nation-level analyses in psychology

OpenAIRE

Kuppens, Toon; Pollet, Thomas V.

2014-01-01

Two recent articles (both published in Psychological Science) rely on nation-level data to address questions about psychological processes: Oishi and Diener (2014), referred to here as “OD,” and Hershfield et al. (2014), referred to as “HBW.” In our opinion, both articles contain problems with regard to the use and interpretation of nation-level data. The problems are (1) the failure to account for the statistical dependence of countries within regions, (2) the use of nation-level data with q...

Clean Energy Policy Analyses: Analysis of the Status and Impact of Clean Energy Policies at the Local Level

Energy Technology Data Exchange (ETDEWEB)

Busche, S.

2010-12-01

This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

Clean Energy Policy Analyses. Analysis of the Status and Impact of Clean Energy Policies at the Local Level

Energy Technology Data Exchange (ETDEWEB)

Busche, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2010-12-01

This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

Ground-Level Ozone Following Astrophysical Ionizing Radiation Events: An Additional Biological Hazard?

Science.gov (United States)

Thomas, Brian C; Goracke, Byron D

2016-01-01

Astrophysical ionizing radiation events such as supernovae, gamma-ray bursts, and solar proton events have been recognized as a potential threat to life on Earth, primarily through depletion of stratospheric ozone and subsequent increase in solar UV radiation at Earth's surface and in the upper levels of the ocean. Other work has also considered the potential impact of nitric acid rainout, concluding that no significant threat is likely. Not yet studied to date is the potential impact of ozone produced in the lower atmosphere following an ionizing radiation event. Ozone is a known irritant to organisms on land and in water and therefore may be a significant additional hazard. Using previously completed atmospheric chemistry modeling, we examined the amount of ozone produced in the lower atmosphere for the case of a gamma-ray burst and found that the values are too small to pose a significant additional threat to the biosphere. These results may be extended to other ionizing radiation events, including supernovae and extreme solar proton events.

Additive effects of LPL, APOA5 and APOE variant combinations on triglyceride levels and hypertriglyceridemia: results of the ICARIA genetic sub-study

Directory of Open Access Journals (Sweden)

Valdivielso Pedro

2010-04-01

Full Text Available Abstract Background Hypertriglyceridemia (HTG is a well-established independent risk factor for cardiovascular disease and the influence of several genetic variants in genes related with triglyceride (TG metabolism has been described, including LPL, APOA5 and APOE. The combined analysis of these polymorphisms could produce clinically meaningful complementary information. Methods A subgroup of the ICARIA study comprising 1825 Spanish subjects (80% men, mean age 36 years was genotyped for the LPL-HindIII (rs320, S447X (rs328, D9N (rs1801177 and N291S (rs268 polymorphisms, the APOA5-S19W (rs3135506 and -1131T/C (rs662799 variants, and the APOE polymorphism (rs429358; rs7412 using PCR and restriction analysis and TaqMan assays. We used regression analyses to examine their combined effects on TG levels (with the log-transformed variable and the association of variant combinations with TG levels and hypertriglyceridemia (TG ≥ 1.69 mmol/L, including the covariates: gender, age, waist circumference, blood glucose, blood pressure, smoking and alcohol consumption. Results We found a significant lowering effect of the LPL-HindIII and S447X polymorphisms (p APOE-ε4 allele were significantly associated with an independent additive TG-raising effect (p p p p p p p = 0.042 and having one single raising polymorphism (OR = 1.20; 95% CI, 1.39-2.87; p p Conclusion Our results showed a significant independent additive effect on TG levels of the LPL polymorphisms HindIII, S447X, D9N and N291S; the S19W and -1131T/C variants of APOA5, and the ε4 allele of APOE in our study population. Moreover, some of the variant combinations studied were significantly associated with the absence or the presence of hypertriglyceridemia.

Early Versus Delayed Motion After Rotator Cuff Repair: A Systematic Review of Overlapping Meta-analyses.

Science.gov (United States)

Houck, Darby A; Kraeutler, Matthew J; Schuette, Hayden B; McCarty, Eric C; Bravman, Jonathan T

2017-10-01

Previous meta-analyses have been conducted to compare outcomes of early versus delayed motion after rotator cuff repair. To conduct a systematic review of overlapping meta-analyses comparing early versus delayed motion rehabilitation protocols after rotator cuff repair to determine which meta-analyses provide the best available evidence. Systematic review. A systematic review was performed by searching PubMed and Cochrane Library databases. Search terms included "rotator cuff repair," "early passive motion," "immobilization," "rehabilitation protocol," and "meta-analysis." Results were reviewed to determine study eligibility. Patient outcomes and structural healing were extracted from these meta-analyses. Meta-analysis quality was assessed using the Oxman-Guyatt and Quality of Reporting of Meta-analyses (QUOROM) systems. The Jadad decision algorithm was then used to determine which meta-analyses provided the best level of evidence. Seven meta-analyses containing a total of 5896 patients met the eligibility criteria (1 Level I evidence, 4 Level II evidence, 2 Level III evidence). None of these meta-analyses found immobilization to be superior to early motion; however, most studies suggested that early motion would increase range of motion (ROM), thereby reducing time of recovery. Three of these studies suggested that tear size contributed to the choice of rehabilitation to ensure proper healing of the shoulder. A study by Chan et al in 2014 received the highest QUOROM and Oxman-Guyatt scores, and therefore this meta-analysis appeared to have the highest level of evidence. Additionally, a study by Riboh and Garrigues in 2014 was selected as the highest quality study in this systematic review according to the Jadad decision algorithm. The current, best available evidence suggests that early motion improves ROM after rotator cuff repair but increases the risk of rotator cuff retear. Lower quality meta-analyses indicate that tear size may provide a better strategy in

Level 2 probabilistic event analyses and quantification

International Nuclear Information System (INIS)

Boneham, P.

2003-01-01

In this paper an example of quantification of a severe accident phenomenological event is given. The performed analysis for assessment of the probability that the debris released from the reactor vessel was in a coolable configuration in the lower drywell is presented. It is also analysed the assessment of the type of core/concrete attack that would occur. The coolability of the debris ex-vessel evaluation by an event in the Simplified Boiling Water Reactor (SBWR) Containment Event Tree (CET) and a detailed Decomposition Event Tree (DET) developed to aid in the quantification of this CET event are considered. The headings in the DET selected to represent plant physical states (e.g., reactor vessel pressure at the time of vessel failure) and the uncertainties associated with the occurrence of critical physical phenomena (e.g., debris configuration in the lower drywell) considered important to assessing whether the debris was coolable or not coolable ex-vessel are also discussed

Use of a scald additive to reduce levels of Salmonella typhimurium during poultry processing.

Science.gov (United States)

McKee, S R; Townsend, J C; Bilgili, S F

2008-08-01

This study was conducted to evaluate the efficacy of a scald additive, RP scald, to reduce Salmonella Typhimurium (ST) levels on inoculated poultry carcasses. The RP scald (contains sodium hydroxide) in a 1% solution has a pH of 11.0, which may reduce bacteria levels on carcasses. In this study, 600 broilers (Ross 708 straight run, 6 wk of age) with 300 broilers in each of 2 experimental trials were divided into 4 scald treatments (inoculated with ST) and 2 noninoculated groups. The treatment groups included 4 scald treatments (n = 50 per experimental group per trial): soft scald (SS; 50 degrees C for 90 s), soft scald with 1.0% added RP scald (SSRP), hard scald (56.6 degrees C for 45 s; HS), and hard scald with 1.0% added RP scald. The noninoculated groups (n = 50 per group per trial) are represented by SS0 and HS0. After defeathering, carcass rinses were collected for ST detection. Results indicated that inoculated broilers from hard scald with 1.0% added RP scald had the lowest Salmonella recovery, whereas carcasses from the SS treatment with no RP additive had the highest ST recovery. In trial 1, the SSRP was more effective in reducing ST than HS alone; however, this trend was not consistent. In trial 2, HS alone was more effective in ST reduction than SSRP. Within each scald temperature, the addition of RP scald increased ST reduction; therefore, RP scald may be effective in reducing ST on broiler carcasses in poultry scalder applications, particularly when hard scald temperatures are used.

Effect of culture levels, ultrafiltered retentate addition, total solid levels and heat treatments on quality improvement of buffalo milk plain set yoghurt.

Science.gov (United States)

Yadav, Vijesh; Gupta, Vijay Kumar; Meena, Ganga Sahay

2018-05-01

Studied the effect of culture (2, 2.5 and 3%), ultrafiltered (UF) retentate addition (0, 11, 18%), total milk solids (13, 13.50, 14%) and heat treatments (80 and 85 °C/30 min) on the change in pH and titratable acidity (TA), sensory scores and rheological parameters of yoghurt. With 3% culture levels, the required TA (0.90% LA) was achieved in minimum 6 h incubation. With an increase in UF retentate addition, there was observed a highly significant decrease in overall acceptability, body and texture and colour and appearance scores, but there was highly significant increase in rheological parameters of yoghurt samples. Yoghurt made from even 13.75% total solids containing nil UF retentate was observed to be sufficiently firm by the sensory panel. Most of the sensory attributes of yoghurt made with 13.50% total solids were significantly better than yoghurt prepared with either 13 or 14% total solids. Standardised milk heated to 85 °C/30 min resulted in significantly better overall acceptability in yoghurt. Overall acceptability of optimised yoghurt was significantly better than a branded market sample. UF retentate addition adversely affected yoghurt quality, whereas optimization of culture levels, totals milk solids and others process parameters noticeably improved the quality of plain set yoghurt with a shelf life of 15 days at 4 °C.

Revealing climate modes in steric sea levels: lessons learned from satellite geodesy, objective analyses and ocean reanalyses

Science.gov (United States)

Pfeffer, J.; Tregoning, P.; Purcell, A. P.

2017-12-01

Due to increased greenhouse gases emissions, the oceans are accumulating heat. In response to the ocean circulation and atmospheric forcing, the heat is irregularly redistributed within the oceans, causing sea level to rise at variable rates in space and time. These rates of steric expansion are extremely difficult to assess because of the sparsity of in-situ hydrographic observations available within the course of the 20th century. We compare here three methods to reconstruct the steric sea levels over the past 13, 25 and 58 years based on satellite geodesy, objective analyses and ocean reanalyses. The interannual to decadal variability of each dataset is explored with a model merging six climate indices representative of the natural variability of the ocean and climate system. Consistent regional patterns are identified for the Pacific Decadal Oscillation (PDO) and El Niño Southern Oscillation (ENSO) in all datasets at all timescales. Despite the short time coverage (13 years), the combination of satellite geodetic data (altimetry and GRACE) also reveals significant steric responses to the North Pacific Gyre Oscillation (NPGO), Indian Dipole (IOD) and Indian ocean basinwide (IOBM) mode. The richer information content in the ocean reanalyses allows us to recover the regional fingerprints of the PDO, ENSO, NPGO, IOD and IOBM, but also of the Atlantic Multidecadal Oscillation (AMO) acting over longer time scales (40 to 60 years). Therefore, ocean reanalyses, coupled with climate mode analyses, constitute innovative and promising tools to investigate the mechanisms triggering the variability of sea level rise over the past decades.

Effects of the addition of functional electrical stimulation to ground level gait training with body weight support after chronic stroke.

Science.gov (United States)

Prado-Medeiros, Christiane L; Sousa, Catarina O; Souza, Andréa S; Soares, Márcio R; Barela, Ana M F; Salvini, Tania F

2011-01-01

The addition of functional electrical stimulation (FES) to treadmill gait training with partial body weight support (BWS) has been proposed as a strategy to facilitate gait training in people with hemiparesis. However, there is a lack of studies that evaluate the effectiveness of FES addition on ground level gait training with BWS, which is the most common locomotion surface. To investigate the additional effects of commum peroneal nerve FES combined with gait training and BWS on ground level, on spatial-temporal gait parameters, segmental angles, and motor function. Twelve people with chronic hemiparesis participated in the study. An A1-B-A2 design was applied. A1 and A2 corresponded to ground level gait training using BWS, and B corresponded to the same training with the addition of FES. The assessments were performed using the Modified Ashworth Scale (MAS), Functional Ambulation Category (FAC), Rivermead Motor Assessment (RMA), and filming. The kinematics analyzed variables were mean walking speed of locomotion; step length; stride length, speed and duration; initial and final double support duration; single-limb support duration; swing period; range of motion (ROM), maximum and minimum angles of foot, leg, thigh, and trunk segments. There were not changes between phases for the functional assessment of RMA, for the spatial-temporal gait variables and segmental angles, no changes were observed after the addition of FES. The use of FES on ground level gait training with BWS did not provide additional benefits for all assessed parameters.

Meta-analysis on Methane Mitigating Properties of Saponin-rich Sources in the Rumen: Influence of Addition Levels and Plant Sources

Directory of Open Access Journals (Sweden)

Anuraga Jayanegara

2014-10-01

Full Text Available Saponins have been considered as promising natural substances for mitigating methane emissions from ruminants. However, studies reported that addition of saponin-rich sources often arrived at contrasting results, i.e. either it decreased methane or it did not. The aim of the present study was to assess ruminal methane emissions through a meta-analytical approach of integrating related studies from published papers which described various levels of different saponin-rich sources being added to ruminant feed. A database was constructed from published literature reporting the addition of saponin-rich sources at various levels and then monitoring ruminal methane emissions in vitro. Accordingly, levels of saponin-rich source additions as well as different saponin sources were specified in the database. Apart from methane, other related rumen fermentation parameters were also included in the database, i.e. organic matter digestibility, gas production, pH, ammonia concentration, short-chain fatty acid profiles and protozoal count. A total of 23 studies comprised of 89 data points met the inclusion criteria. The data obtained were subsequently subjected to a statistical meta-analysis based on mixed model methodology. Accordingly, different studies were treated as random effects whereas levels of saponin-rich source additions or different saponin sources were considered as fixed effects. Model statistics used were p-value and root mean square error. Results showed that an addition of increasing levels of a saponin-rich source decreased methane emission per unit of substrate incubated as well as per unit of total gas produced (ptea>quillaja, statistically they did not differ each other. It can be concluded that methane mitigating properties of saponins in the rumen are level- and source-dependent.

Marital and Family Satisfaction as a Function of Work-Family Demands and Community Resources: Individual- and Couple-Level Analyses

Science.gov (United States)

Hostetler, Andrew J.; Desrochers, Stephan; Kopko, Kimberly; Moen, Phyllis

2012-01-01

This study uses individual- and couple-level analyses to examine the influence of work-family demands and community resources on marital and family satisfaction within a sample of dual-earner parents with dependent children (N = 260 couples, 520 individuals). Total couple work hours were strongly negatively associated with marital satisfaction for…

Formation and reduction of carcinogenic furan in various model systems containing food additives.

Science.gov (United States)

Kim, Jin-Sil; Her, Jae-Young; Lee, Kwang-Geun

2015-12-15

The aim of this study was to analyse and reduce furan in various model systems. Furan model systems consisting of monosaccharides (0.5M glucose and ribose), amino acids (0.5M alanine and serine) and/or 1.0M ascorbic acid were heated at 121°C for 25 min. The effects of food additives (each 0.1M) such as metal ions (iron sulphate, magnesium sulphate, zinc sulphate and calcium sulphate), antioxidants (BHT and BHA), and sodium sulphite on the formation of furan were measured. The level of furan formed in the model systems was 6.8-527.3 ng/ml. The level of furan in the model systems of glucose/serine and glucose/alanine increased 7-674% when food additives were added. In contrast, the level of furan decreased by 18-51% in the Maillard reaction model systems that included ribose and alanine/serine with food additives except zinc sulphate. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Effectiveness of an Additional Stretching Exercise Program in Improving Flexibility Level among Preschool Boys

Science.gov (United States)

Lee, Wee Akina Sia Seng; Rengasamy, Shabeshan A/L; Raju, Subramaniam A/L

2014-01-01

This study was conducted to examine the effectiveness of a two minutes' additional stretching exercise program in a 30 minutes games teaching lesson in improving the flexibility level of 6 year old preschool boys (M = 5.92, SD = 0.27) in a preschool in Malaysia. Fifty (50) preschool boys were selected for the study based on the intact sampling…

Addition by Subtraction: The Relation Between Dropout Rates and School-Level Academic Achievement.

Science.gov (United States)

Glennie, Elizabeth; Bonneau, Kara; Vandellen, Michelle; Dodge, Kenneth A

2012-01-01

Efforts to improve student achievement should increase graduation rates. However, work investigating the effects of student-level accountability has consistently demonstrated that increases in the standards for high school graduation are correlated with increases in dropout rates. The most favored explanation for this finding is that high-stakes testing policies that mandate grade repetition and high school exit exams may be the tipping point for students who are already struggling academically. These extra demands may, in fact, push students out of school. This article examines two hypotheses regarding the relation between school-level accountability and dropout rates. The first posits that improvements in school performance lead to improved success for everyone. If school-level accountability systems improve a school for all students, then the proportion of students performing at grade level increases, and the dropout rate decreases. The second hypothesis posits that schools facing pressure to improve their overall accountability score may pursue this increase at the cost of other student outcomes, including dropout rate. Our approach focuses on the dynamic relation between school-level academic achievement and dropout rates over time-that is, between one year's achievement and the subsequent year's dropout rate, and vice versa. This article employs longitudinal data of records on all students in North Carolina public schools over an 8-year period. Analyses employ fixed-effects models clustering schools and districts within years and controls each year for school size, percentage of students who were free/reduced-price lunch eligible, percentage of students who are ethnic minorities, and locale. This study finds partial evidence that improvements in school-level academic performance will lead to improvements (i.e., decreases) in school-level dropout rates. Schools with improved performance saw decreased dropout rates following these successes. However, we find

Effect of Various Food Additives on the Levels of 4(5)-Methylimidazole in a Soy Sauce Model System.

Science.gov (United States)

Lee, Sumin; Lee, Jung-Bin; Hwang, Junho; Lee, Kwang-Geun

2016-01-01

In this study, the effect of food additives such as iron sulfate, magnesium sulfate, zinc sulfate, citric acid, gallic acid, and ascorbic acid on the reduction of 4(5)-methylimidazole (4(5)-MI) was investigated using a soy sauce model system. The concentration of 4(5)-MI in the soy sauce model system with 5% (v/v) caramel colorant III was 1404.13 μg/L. The reduction rate of 4(5)-MI level with the addition of 0.1M additives followed in order: iron sulfate (81%) > zinc sulfate (61%) > citric acid (40%) > gallic acid (38%) > ascorbic acid (24%) > magnesium sulfate (13%). Correlations between 4(5)-MI levels and the physicochemical properties of soy sauce, including the amount of caramel colorant, pH value, and color differences, were determined. The highest correlations were found between 4(5)-MI levels and the amount of caramel colorant and pH values (r(2) = 0.9712, r(2) = 0.9378). The concentration of caramel colorants in 8 commercial soy sauces were estimated, and ranged from 0.01 to 1.34% (v/v). © 2015 Institute of Food Technologists®

Estimating the prevalence of 26 health-related indicators at neighbourhood level in the Netherlands using structured additive regression.

Science.gov (United States)

van de Kassteele, Jan; Zwakhals, Laurens; Breugelmans, Oscar; Ameling, Caroline; van den Brink, Carolien

2017-07-01

Local policy makers increasingly need information on health-related indicators at smaller geographic levels like districts or neighbourhoods. Although more large data sources have become available, direct estimates of the prevalence of a health-related indicator cannot be produced for neighbourhoods for which only small samples or no samples are available. Small area estimation provides a solution, but unit-level models for binary-valued outcomes that can handle both non-linear effects of the predictors and spatially correlated random effects in a unified framework are rarely encountered. We used data on 26 binary-valued health-related indicators collected on 387,195 persons in the Netherlands. We associated the health-related indicators at the individual level with a set of 12 predictors obtained from national registry data. We formulated a structured additive regression model for small area estimation. The model captured potential non-linear relations between the predictors and the outcome through additive terms in a functional form using penalized splines and included a term that accounted for spatially correlated heterogeneity between neighbourhoods. The registry data were used to predict individual outcomes which in turn are aggregated into higher geographical levels, i.e. neighbourhoods. We validated our method by comparing the estimated prevalences with observed prevalences at the individual level and by comparing the estimated prevalences with direct estimates obtained by weighting methods at municipality level. We estimated the prevalence of the 26 health-related indicators for 415 municipalities, 2599 districts and 11,432 neighbourhoods in the Netherlands. We illustrate our method on overweight data and show that there are distinct geographic patterns in the overweight prevalence. Calibration plots show that the estimated prevalences agree very well with observed prevalences at the individual level. The estimated prevalences agree reasonably well with the

Addition by Subtraction: The Relation Between Dropout Rates and School-Level Academic Achievement

Science.gov (United States)

GLENNIE, ELIZABETH; BONNEAU, KARA; VANDELLEN, MICHELLE; DODGE, KENNETH A.

2013-01-01

Background/Context Efforts to improve student achievement should increase graduation rates. However, work investigating the effects of student-level accountability has consistently demonstrated that increases in the standards for high school graduation are correlated with increases in dropout rates. The most favored explanation for this finding is that high-stakes testing policies that mandate grade repetition and high school exit exams may be the tipping point for students who are already struggling academically. These extra demands may, in fact, push students out of school. Purpose/Objective/Focus This article examines two hypotheses regarding the relation between school-level accountability and dropout rates. The first posits that improvements in school performance lead to improved success for everyone. If school-level accountability systems improve a school for all students, then the proportion of students performing at grade level increases, and the dropout rate decreases. The second hypothesis posits that schools facing pressure to improve their overall accountability score may pursue this increase at the cost of other student outcomes, including dropout rate. Research Design Our approach focuses on the dynamic relation between school-level academic achievement and dropout rates over time—that is, between one year’s achievement and the subsequent year’s dropout rate, and vice versa. This article employs longitudinal data of records on all students in North Carolina public schools over an 8-year period. Analyses employ fixed-effects models clustering schools and districts within years and controls each year for school size, percentage of students who were free/reduced-price lunch eligible, percentage of students who are ethnic minorities, and locale. Findings/Results This study finds partial evidence that improvements in school-level academic performance will lead to improvements (i.e., decreases) in school-level dropout rates. Schools with improved

Progress Report on Computational Analyses of Water-Based NSTF

Energy Technology Data Exchange (ETDEWEB)

Lv, Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Kraus, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Bucknor, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lisowski, D. [Argonne National Lab. (ANL), Argonne, IL (United States); Nunez, D. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-01

CFD analysis has been focused on important component-level phenomena using STARCCM+ to supplement the system analysis of integral system behavior. A notable area of interest was the cavity region. This area is of particular interest for CFD analysis due to the multi-dimensional flow and complex heat transfer (thermal radiation heat transfer and natural convection), which are not simulated directly by RELAP5. CFD simulations allow for the estimation of the boundary heat flux distribution along the riser tubes, which is needed in the RELAP5 simulations. The CFD results can also provide additional data to help establish what level of modeling detail is necessary in RELAP5. It was found that the flow profiles in the cavity region are simpler for the water-based concept than for the air-cooled concept. The local heat flux noticeably increases axially, and is higher in the fins than in the riser tubes. These results were utilized in RELAP5 simulations as boundary conditions, to provide better temperature predictions in the system level analyses. It was also determined that temperatures were higher in the fins than the riser tubes, but within design limits for thermal stresses. Higher temperature predictions were identified in the edge fins, in part due to additional thermal radiation from the side cavity walls.

A policy hackathon for analysing impacts and solutions up to 20 metres sea-level rise

Science.gov (United States)

Haasnoot, Marjolijn; Bouwer, Laurens; Kwadijk, Jaap

2017-04-01

We organised a policy hackathon in order to quantify the impacts accelerated and high-end sea-level rise up to 20 metres on the coast of the Netherlands, and develop possible solutions. This was done during one day, with 20 experts that had a wide variety of disciplines, including hydrology, geology, coastal engineering, economics, and public policy. During the process the problem was divided up into several sub-sets of issues that were analysed and solved within small teams of between 4 to 8 people. Both a top-down impact analysis and bottom-up vulnerability analysis was done by answering the questions: What is the impact of sea level rise of x meter?; and How much sea level rise can be accommodated with before transformative actions are needed? Next, adaptation tipping points were identified that describe conditions under which the coastal system starts to perform unacceptably. Reasons for an adaptation tipping point can be technical (technically not possible), economic (cost-benefits are negative), or resources (available space, sand, energy production, financial). The results are presented in a summary document, and through an infographic displaying different adaptation tipping points and milestones that occur when the sea level rises up to 20 m. No technical limitations were found for adaptation, but many important decisions need to be taken. Although accelerated sea level rise seems far away it can have important consequences for short-term decisions that are required for transformative actions. Such extensive actions require more time for implementation. Also, other action may become ineffective before their design life. This hackathon exercise shows that it is possible to map within a short time frame the issues at hand, as well as potentially effective solutions. This can be replicated for other problems, and can be useful for several decision-makers that require quick but in-depth analysis of their long-term planning problems.

Relative level populations in S VI after beam-foil excitation, obtained from ANDC analyses of measured decay curves

International Nuclear Information System (INIS)

Engstroem, L.

1983-01-01

This paper reports the relative population of the levels 3p, 3d, 4d, 5d, 4f, 5g, 6g, 6h, 7h, 7i, 8i and 8k in Na-like sulfur, S VI, after beam-foil excitation at an energy of 3 MeV. For the first time the ANDC technique has been used to obtain the relative efficiency calibration of the detection system at discrete points in the wavelength interval 400-5000 A, from the analyses of measured decay curves. The advantages and limitations of this method are discussed. The populations obtained with this new technique are compared to previous measurements in multiply ionized atoms. The preferential population of the 3p and 3d levels observed in other Na-like ions is now accurately established. For the higher lying levels an almost constant population is observed. (Auth.)

Evaluation of geological documents available for provisional safety analyses of potential sites for nuclear waste repositories - Are additional geological investigations needed?

International Nuclear Information System (INIS)

2010-10-01

The procedure for selecting repository sites for all categories of radioactive waste in Switzerland is defined in the conceptual part of the Sectoral Plan for Deep Geological Repositories, which foresees a selection of sites in three stages. In Stage I, Nagra proposed geological siting regions based on criteria relating to safety and engineering feasibility. The Swiss Government (the Federal Council) is expected to decide on the siting proposals in 2011. The objective of Stage 2 is to prepare proposals for the location of the surface facilities within the planning perimeters defined by the Federal Council in its decision on Stage 1 and to identify potential sites. Nagra also has to carry out a provisional safety analysis for each site and a safety-based comparison of the sites. Based on this, and taking into account the results of the socio-economic-ecological impact studies, Nagra then has to propose at least two sites for each repository type to be carried through to Stage 3. The proposed sites will then be investigated in more detail in Stage 3 to ensure that the selection of the sites for the General Licence Applications is well founded. In order to realise the objectives of the upcoming Stage 2, the state of knowledge of the geological conditions at the sites has to be sufficient to perform the provisional safety analyses. Therefore, in preparation for Stage 2, the conceptual part of the Sectoral Plan requires Nagra to clarify the need for additional investigations aimed at providing input for the provisional safety analyses. The purpose of the present report is to document Nagra's technical-scientific assessment of this need. The focus is on evaluating the geological information based on processes and parameters that are relevant for safety and engineering feasibility. In evaluating the state of knowledge the key question is whether additional information could lead to a different decision regarding the selection of the sites to be carried through to Stage 3

Performance of an Additional Task During Level 2 Automated Driving: An On-Road Study Comparing Drivers With and Without Experience With Partial Automation.

Science.gov (United States)

Solís-Marcos, Ignacio; Ahlström, Christer; Kircher, Katja

2018-05-01

To investigate the influence of prior experience with Level 2 automation on additional task performance during manual and Level 2 partially automated driving. Level 2 automation is now on the market, but its effects on driver behavior remain unclear. Based on previous studies, we could expect an increase in drivers' engagement in secondary tasks during Level 2 automated driving, but it is yet unknown how drivers will integrate all the ongoing demands in such situations. Twenty-one drivers (12 without, 9 with Level 2 automation experience) drove on a highway manually and with Level 2 automation (exemplified by Volvo Pilot Assist generation 2; PA2) while performing an additional task. In half of the conditions, the task could be interrupted (self-paced), and in the other half, it could not (system-paced). Drivers' visual attention, additional task performance, and other compensatory strategies were analyzed. Driving with PA2 led to decreased scores in the additional task and more visual attention to the dashboard. In the self-paced condition, all drivers looked more to the task and perceived a lower mental demand. The drivers experienced with PA2 used the system and the task more than the novice group and performed more overtakings. The additional task interfered more with Level 2 automation than with manual driving. The drivers, particularly the automation novice drivers, used some compensatory strategies. Automation designers need to consider these potential effects in the development of future automated systems.

Validation analysis of probabilistic models of dietary exposure to food additives.

Science.gov (United States)

Gilsenan, M B; Thompson, R L; Lambe, J; Gibney, M J

2003-10-01

The validity of a range of simple conceptual models designed specifically for the estimation of food additive intakes using probabilistic analysis was assessed. Modelled intake estimates that fell below traditional conservative point estimates of intake and above 'true' additive intakes (calculated from a reference database at brand level) were considered to be in a valid region. Models were developed for 10 food additives by combining food intake data, the probability of an additive being present in a food group and additive concentration data. Food intake and additive concentration data were entered as raw data or as a lognormal distribution, and the probability of an additive being present was entered based on the per cent brands or the per cent eating occasions within a food group that contained an additive. Since the three model components assumed two possible modes of input, the validity of eight (2(3)) model combinations was assessed. All model inputs were derived from the reference database. An iterative approach was employed in which the validity of individual model components was assessed first, followed by validation of full conceptual models. While the distribution of intake estimates from models fell below conservative intakes, which assume that the additive is present at maximum permitted levels (MPLs) in all foods in which it is permitted, intake estimates were not consistently above 'true' intakes. These analyses indicate the need for more complex models for the estimation of food additive intakes using probabilistic analysis. Such models should incorporate information on market share and/or brand loyalty.

Learning Achievement and the Efficiency of Learning the Concept of Vector Addition at Three Different Grade Levels

Science.gov (United States)

Gubrud, Allan R.; Novak, Joseph D.

1973-01-01

Empirical data relate to Bruner's and Ausubel's theories of learning concepts at different age levels. The concept of vector addition was taught to eighth, ninth, and tenth grade students. The concept was learned and retained by high ability ninth and all tenth grade students. (PS)

Outcomes of 3-Year-Old Children With Hearing Loss and Different Types of Additional Disabilities

Science.gov (United States)

Cupples, Linda

2014-01-01

This research investigated the speech, language, and functional auditory outcomes of 119 3-year-old children with hearing loss and additional disabilities. Outcomes were evaluated using direct assessment and caregiver report. Multiple regressions revealed that type of additional disability and level of maternal education were significant predictors of language outcomes. Poorer outcomes were achieved in a combined group of children with autism, cerebral palsy, and/or developmental delay (DD) (Group A), compared with children with vision or speech output impairments, syndromes not entailing DD, or medical disorders (Group B). Better outcomes were associated with higher levels of maternal education. The association between better language outcomes and earlier cochlear implant switch-on approached significance. Further regression analyses were conducted separately for children with different types of additional disabilities. Level of maternal education was the only significant predictor of outcomes for Group A children, whereas degree of hearing loss was the strongest predictor for children in Group B. The findings highlight the variable impact that different types of additional disabilities can have on language development in children with hearing loss. PMID:24150488

State of Level 2 analyses and severe accident management in Spanish nuclear power plants

International Nuclear Information System (INIS)

Otero, R.

1998-01-01

The state of the PSA/IPE studies in the Spanish NPPs is presented in this report, as well as the plans to implement the severe accident management strategy both in the Spanish BWRs and PWRs. First, the Spanish LWRs are introduced, and the scope of the IPE analyses required by the Spanish Regulatory Commission (CSN) is given. The general overview is completed with the current degree of development for the IPE studies in each plant. In the second part the methods and tools are shown which are used by the Spanish plants to develop their Level 2 analysis. The different strategies for severe accident management adopted by the BWPs and PWRs in Spain are also outlined. The sources and implementation of the Severe Accident Guidelines (SAG) are described. More detail is given in the following chapters to the containment analysis of Trillo (PWR, KWU design) and Cofrentes (BWR/6, GE design) NPPs, whose development is being carried out by IBERDROLA. The analysis which has been performed up to date for Trillo is limited to the Plant Damage State (PDS) definition. However, the main phenomena challenging its containment performance have been identified, and they are summarized here. The Level 2 analysis for Cofrentes is comparatively more developed. The main phenomena and the key equipment affecting its containment behaviour are presented. Finally the conclusions of this report are elaborated. (author)

Gene and pathway level analyses of germline DNA-repair gene variants and prostate cancer susceptibility using the iCOGS-genotyping array

DEFF Research Database (Denmark)

Saunders, Edward J; Dadaev, Tokhir; Leongamornlert, Daniel A

2016-01-01

the SKAT-C test from the SNP-set (Sequence) Kernel Association Test (SKAT) identified a significant association with PrCa for MSH5. Pathway-level analyses suggested a possible role for the translesion synthesis pathway in PrCa risk and Homologous recombination/Fanconi Anaemia pathway for Pr...

Analysing the breakthrough of rock 'n' roll (1930-1970) Multi-regime interaction and reconfiguration in the multi-level perspective

OpenAIRE

Geels, Frank W.

2007-01-01

The breakthrough of rock 'n' roll was part of broader transformations in the American music industry, involving changes in music instruments, music recording technology, audiences, radio programming and music styles. These transformations will be analysed as sociotechnical transition, using the multi-level perspective. One characteristic of the case is interactions between multiple regimes: radio and recording. Another characteristic is the presence of strong cultural components, with rock 'n...

Relationship of blood lead levels and blood pressure in NHANES II: additional calculations

International Nuclear Information System (INIS)

Gartside, P.S.

1988-01-01

In performing research for associations and relationships among the data thus far published from the NHANES II survey, only the data for the 64 communities involved may be used. The simple omission of a few essential data makes impossible any valid analysis from the data for the 20,325 individual respondents. In this research for associations between blood lead levels and blood pressure in NHANES II, the method of forward stepwise regression was used. This avoids the problem of inflated error rates for blood lead, maximizes the number of data analyzed, and minimizes the number of independent variables entered into the regression model, thus avoiding the pitfalls that previous NHANES II research of blood lead and blood pressure has fallen into when using backward stepwise regression. The results of this research for white male adults, white female adults, and black adults were contradictory and lacked consistency and reliability. In addition, the overall average association between blood lead level and blood pressure was so minute that the only rational conclusion is that there is no evidence for this association to be found in the NHANES II data

Real-Time Soils Characterization and Analyses Systems Used at Ohio Closure Sites

International Nuclear Information System (INIS)

Roybal, Lyle Gene; Carpenter, Michael Vance; Giles, John Robert; Hartwell, John Kelvin; Danahy, R.

2003-01-01

The Idaho National Engineering and Environmental Laboratory (INEEL) and the Fernald Environmental Management Project (FEMP) have jointly developed a field-deployed analytical system to rapidly scan, characterize, and analyze surface soil contamination. The basic system consists of a sodium iodide (NaI) spectrometer and global positioning system (GPS) hardware. This hardware can be deployed from any of four different platforms depending on the scope of the survey at hand. These platforms range from a large tractor-based unit (the RTRAK) used to survey large, relatively flat areas to a hand-pushed unit where maneuverability is important, to an excavator mounted system used to scan pits and trenches. The mobile sodium iodide concept was initially developed by the FEMP to provide pre-screening analyses for soils contaminated with uranium, thorium, and radium. The initial study is documented in the RTRAK Applicability Study and provides analyses supporting the field usage of the concept. The RTRAK system produced data that required several days of post-processing and analyses to generate an estimation of field coverage and activity levels. The INEEL has provided integrated engineering, computer hardware and software support to greatly streamline the data acquisition and analysis process to the point where real-time activity and coverage maps are available to the field technicians. On-line analyses have been added to automatically convert GPS data to Ohio State-Plane coordinates, examine and correct collected spectra for energy calibration drifts common to NaI spectrometers, and strip spectra in regions of interest to provide moisture corrected activity levels for total uranium, thorium-232, and radium-226. Additionally, the software provides a number of checks and alarms to alert operators that a hand-examination of spectral data in a particular area may be required. The FEMP has estimated that this technology has produced projected site savings in excess of $34M

Children's patterns of reasoning about reading and addition concepts.

Science.gov (United States)

Farrington-Flint, Lee; Canobi, Katherine H; Wood, Clare; Faulkner, Dorothy

2010-06-01

Children's reasoning was examined within two educational contexts (word reading and addition) so as to understand the factors that contribute to relational reasoning in the two domains. Sixty-seven 5- to 7-year-olds were given a series of related words to read or single-digit addition items to solve (interspersed with unrelated items). The frequency, accuracy, and response times of children's self-reports on the conceptually related items provided a measure of relational reasoning, while performance on the unrelated addition and reading items provided a measure of procedural skill. The results indicated that the children's ability to use conceptual relations to solve both reading and addition problems enhanced speed and accuracy levels, increased with age, and was related to procedural skill. However, regression analyses revealed that domain-specific competencies can best explain the use of conceptual relations in both reading and addition. Moreover, a cluster analysis revealed that children differ according to the academic domain in which they first apply conceptual relations and these differences are related to individual variation in their procedural skills within these particular domains. These results highlight the developmental significance of relational reasoning in the context of reading and addition and underscore the importance of concept-procedure links in explaining children's literacy and arithmetical development.

Performance assessment analyses unique to Department of Energy spent nuclear fuel

International Nuclear Information System (INIS)

Loo, H.H.; Duguid, J.J.

2000-01-01

This paper describes the iterative process of grouping and performance assessment that has led to the current grouping of the U.S. Department of Energy (DOE) spent nuclear fuel (SNF). The unique sensitivity analyses that form the basis for incorporating DOE fuel into the total system performance assessment (TSPA) base case model are described. In addition, the chemistry that results from dissolution of DOE fuel and high level waste (HLW) glass in a failed co-disposal package, and the effects of disposal of selected DOE SNF in high integrity cans are presented

Uncertainty Analyses and Strategy

International Nuclear Information System (INIS)

Kevin Coppersmith

2001-01-01

The DOE identified a variety of uncertainties, arising from different sources, during its assessment of the performance of a potential geologic repository at the Yucca Mountain site. In general, the number and detail of process models developed for the Yucca Mountain site, and the complex coupling among those models, make the direct incorporation of all uncertainties difficult. The DOE has addressed these issues in a number of ways using an approach to uncertainties that is focused on producing a defensible evaluation of the performance of a potential repository. The treatment of uncertainties oriented toward defensible assessments has led to analyses and models with so-called ''conservative'' assumptions and parameter bounds, where conservative implies lower performance than might be demonstrated with a more realistic representation. The varying maturity of the analyses and models, and uneven level of data availability, result in total system level analyses with a mix of realistic and conservative estimates (for both probabilistic representations and single values). That is, some inputs have realistically represented uncertainties, and others are conservatively estimated or bounded. However, this approach is consistent with the ''reasonable assurance'' approach to compliance demonstration, which was called for in the U.S. Nuclear Regulatory Commission's (NRC) proposed 10 CFR Part 63 regulation (64 FR 8640 [DIRS 101680]). A risk analysis that includes conservatism in the inputs will result in conservative risk estimates. Therefore, the approach taken for the Total System Performance Assessment for the Site Recommendation (TSPA-SR) provides a reasonable representation of processes and conservatism for purposes of site recommendation. However, mixing unknown degrees of conservatism in models and parameter representations reduces the transparency of the analysis and makes the development of coherent and consistent probability statements about projected repository

Application of Natural Mineral Additives in Construction

Science.gov (United States)

Linek, Malgorzata; Nita, Piotr; Wolka, Paweł; Zebrowski, Wojciech

2017-12-01

The article concerns the idea of using selected mineral additives in the pavement quality concrete composition. The basis of the research paper was the modification of cement concrete intended for airfield pavements. The application of the additives: metakaolonite and natural zeolite was suggested. Analyses included the assessment of basic physical properties of modifiers. Screening analysis, assessment of micro structure and chemical microanalysis were conducted in case of these materials. The influence of the applied additives on the change of concrete mix parameters was also presented. The impact of zeolite and metakaolinite on the mix density, oxygen content and consistency class was analysed. The influence of modifiers on physical and mechanical changes of the hardened cement concrete was discussed (concrete density, compressive strength and bending strength during fracturing) in diversified research periods. The impact of the applied additives on the changes of internal structure of cement concrete was discussed. Observation of concrete micro structure was conducted using the scanning electron microscope. According to the obtained lab test results, parameters of the applied modifiers and their influence on changes of internal structure of cement concrete are reflected in the increase of mechanical properties of pavement quality concrete. The increase of compressive and bending strength in case of all analysed research periods was proved.

Associations between congenital cryptorchidism in newborn boys and levels of dioxins and PCBs in placenta

DEFF Research Database (Denmark)

Virtanen, H E; Koskenniemi, J J; Sundqvist, E

2012-01-01

In animal studies, exposure to dioxins has been associated with disrupted development of the male reproductive system, including testicular maldescent. Some polychlorinated biphenyls (PCBs) have also dioxin-like effects. In addition, one previous case-control study has reported an association...... between congenital cryptorchidism and colostrum PCB levels. We performed a case-control study to evaluate whether congenital cryptorchidism in boys was associated with increased levels of dioxins or PCBs in placenta reflecting foetal exposure. In addition, associations between placenta levels...... controls) and 168 Danish (39 cases, 129 controls)] were analysed for 17 toxic polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and 37 PCBs (including 12 dioxin-like PCBs). Infant serum samples taken at 3 months were analysed for reproductive hormones. No significant differences between cases...

Development of an on-line electrochemical analyser for trace level aluminium

International Nuclear Information System (INIS)

Chow, Christopher W.K.; Thomas, Shaun D.; Davey, David E.; Mulcahy, Dennis E.; Drikas, Mary

2003-01-01

An in-house designed computerised flow injection (FI) system for low-level aluminium analysis is examined. A simple, low cost electrochemical detection system has been implemented with computerised control and data acquisition system. The system consists of a commercial electrochemical analyser, FI components (manifold, pumps and valves) and an in-house designed control system to perform automated analysis. This system was developed to study aluminium speciation in water, particularly for drinking water. The analytical technique was based upon the complexation reaction between aluminium and a ligand--DASA (1,2-dihydroxy-anthraquinone-3-sulphonic acid). 'Labile' and total aluminium concentrations, Al labile and Al total , respectively, were determined by measuring the sample before and after UV irradiation by amperometry at +0.6 V. The limit of detection for this technique was 10 μg/l (0.37 μM) and the linear calibration range was up to 1.6 mg/l (60 μM) with r 2 value of 0.999. The Al labile /Al total ratios of the water treated by 40, 80 and 100 mg/l of alum using a laboratory scale pilot plant to simulate conventional drinking water treatment processes were found to be 0.4, 0.5 and 0.8, respectively. These results indicated that when higher alum dose was employed, the residual aluminium was present mostly as the 'labile' species. Whereas, if the treatment process was not running at its optimum condition (underdosing), a large portion of aluminium was present as natural organic matter (NOM) - aluminium complexes in the treated water. The system offers a practical and effective means of providing extended knowledge of residual aluminium in drinking water

Cost-benefit analyses of supplementary measles immunisation in the highly immunized population of New Zealand.

Science.gov (United States)

Hayman, D T S; Marshall, J C; French, N P; Carpenter, T E; Roberts, M G; Kiedrzynski, T

2017-09-05

As endemic measles is eliminated from countries through increased immunisation, the economic benefits of enhanced immunisation programs may come into question. New Zealand has suffered from outbreaks after measles introductions from abroad and we use it as a model system to understand the benefits of catch up immunisation in highly immunised populations. We provide cost-benefit analyses for measles supplementary immunisation in New Zealand. We model outbreaks based on estimates of the basic reproduction number in the vaccinated population (R v , the number of secondary infections in a partially immunised population), based on the number of immunologically-naïve people at district and national levels, considering both pre- and post-catch up vaccination scenarios. Our analyses suggest that measles R v often includes or exceeds one (0.18-3.92) despite high levels of population immunity. We calculate the cost of the first 187 confirmed and probable measles cases in 2014 to be over NZ$1 million (∼US$864,200) due to earnings lost, case management and hospitalization costs. The benefit-cost ratio analyses suggest additional vaccination beyond routine childhood immunisation is economically efficient. Supplemental vaccination-related costs are required to exceed approximately US$66 to US$1877 per person, depending on different scenarios, before supplemental vaccination is economically inefficient. Thus, our analysis suggests additional immunisation beyond childhood programs to target naïve individuals is economically beneficial even when childhood immunisation rates are high. Copyright © 2017 Elsevier Ltd. All rights reserved.

Carcass Characteristics of Growing Male Pig in Different Level of Clenbuterol Addition

Directory of Open Access Journals (Sweden)

Wayan Sukarya Dilaga

2013-10-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE Abstract - Nowadays, pig has becomes an important role in meat supply chain and demand in the world. However, in the intensive maintenance system, raising pig still has problems especially in feed supplements. The investigation on carcass characteristics of growing male pig in different level of clenbuterol addition in feed was conducted. CRD factorial 2 x 3 with 4 repetitions was used in the experiment. The first factor is the nation's pig (L = local pigs & pig off spring K=imports and the second factor is the level of clenbuterol (T0 = 0 mg/kg feed; T1 = 0.20 mg/kg feed & T2 = 0.40 mg/kg feed. The materials were 24 male grower pigs (12 local & 12 imported pigs with 52.5 ± 28.27 kg body weight. Pigs were reared in individual cages for 6 weeks consisting 2 weeks for adaptation and 4 weeks for data collection. The pigs were given the same feed consisting of rice bran 27.8%, 55.5% and 16.7% corn concentrate. Feeding pigs was given in appropriate growth phase as much as 2 times a day. Drink provided using ad-libitum method. At the end of the study, the pigs were slaughtered. The meat was then analyzed based on the weight of the cut meat, weight of hot carcass, carcass percentage and carcass components (meat, bones and fat. The data was analyzed in variety followed by various orthogonal polynomial tests. Results shown that there were a real interaction between carcass weight and weight cut with quadratic pattern. Clenbuterol also found out to give an reduction effect on carcass percentage in both local and imported pig. In fact the local pigs give the lower carcass percentage than the imported one. Key Words – clenbuterol; weight cut; carcass percentag; carcass component /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso

Galvanostatic bottom-up filling of TSV-like trenches: Choline-based leveler containing two quaternary ammoniums

International Nuclear Information System (INIS)

Kim, Myung Jun; Seo, Youngran; Kim, Hoe Chul; Lee, Yoonjae; Choe, Seunghoe; Kim, Young Gyu; Cho, Sung Ki; Kim, Jae Jeong

2015-01-01

Highlights: • The choline-based leveler having two quaternary ammoniums was synthesized. • The adsorption of this leveler with suppressor and accelerator was examined. • Galvanostatic Cu bottom-up filling was achieved with three-additive system. • The mechanism of gap-filling was elucidated based on the additive adsorption. - Abstract: Through Silicon Via (TSV) technology is essential to accomplish 3-dimensional packaging of electronics. Hence, more reliable and faster TSV filling by Cu electrodeposition is required. Our approach to improve Cu gap-filling in TSV is based on the development of new organic additives for feature filling. Here, we introduce our achievements from the synthesis of choline-based leveler to the feature filling using a synthesized leveler. The choline-based leveler, which includes two quaternary ammoniums at both ends of the molecule, is synthesized from glutaric acid. The characteristics of the choline-based additive are examined by the electrochemical analyses, and it is confirmed that the choline-based leveler shows a convection dependent adsorption behavior, which is essential for leveling. The interactions between the polymeric suppressor, accelerator, and the choline-based leveler are also investigated by changing the convection condition. Using the combination of suppressor, accelerator, and the choline-based leveler, the extreme bottom-up filling of Cu at trenches with dimensions similar to TSV are fulfilled. The mechanism of Cu gap-filling is demonstrated based on the results of electrochemical analyses and feature filling

High-level radioactive waste disposal type and theoretical analyses

International Nuclear Information System (INIS)

Lu Yingfa; Wu Yanchun; Luo Xianqi; Cui Yujun

2006-01-01

Study of high-level radioactive waste disposal is necessary for the nuclear electrical development; the determination of nuclear waste depository type is one of importance safety. Based on the high-level radioactive disposal type, the relative research subjects are proposed, then the fundamental research characteristics of nuclear waste disposition, for instance: mechanical and hydraulic properties of rock mass, saturated and unsaturated seepage, chemical behaviors, behavior of special soil, and gas behavior, etc. are introduced, the relative coupling equations are suggested, and a one dimensional result is proposed. (authors)

Consumer factors predicting level of treatment response to illness management and recovery.

Science.gov (United States)

White, Dominique A; McGuire, Alan B; Luther, Lauren; Anderson, Adrienne I; Phalen, Peter; McGrew, John H

2017-12-01

This study aims to identify consumer-level predictors of level of treatment response to illness management and recovery (IMR) to target the appropriate consumers and aid psychiatric rehabilitation settings in developing intervention adaptations. Secondary analyses from a multisite study of IMR were conducted. Self-report data from consumer participants of the parent study (n = 236) were analyzed for the current study. Consumers completed prepost surveys assessing illness management, coping, goal-related hope, social support, medication adherence, and working alliance. Correlations and multiple regression analyses were run to identify self-report variables that predicted level of treatment response to IMR. Analyses revealed that goal-related hope significantly predicted level of improved illness self-management, F(1, 164) = 10.93, p consumer-level predictors of level of treatment response have not been explored for IMR. Although 2 significant predictors were identified, study findings suggest more work is needed. Future research is needed to identify additional consumer-level factors predictive of IMR treatment response in order to identify who would benefit most from this treatment program. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Seismic fragility analyses

International Nuclear Information System (INIS)

Kostov, Marin

2000-01-01

In the last two decades there is increasing number of probabilistic seismic risk assessments performed. The basic ideas of the procedure for performing a Probabilistic Safety Analysis (PSA) of critical structures (NUREG/CR-2300, 1983) could be used also for normal industrial and residential buildings, dams or other structures. The general formulation of the risk assessment procedure applied in this investigation is presented in Franzini, et al., 1984. The probability of failure of a structure for an expected lifetime (for example 50 years) can be obtained from the annual frequency of failure, β E determined by the relation: β E ∫[d[β(x)]/dx]P(flx)dx. β(x) is the annual frequency of exceedance of load level x (for example, the variable x may be peak ground acceleration), P(fI x) is the conditional probability of structure failure at a given seismic load level x. The problem leads to the assessment of the seismic hazard β(x) and the fragility P(fl x). The seismic hazard curves are obtained by the probabilistic seismic hazard analysis. The fragility curves are obtained after the response of the structure is defined as probabilistic and its capacity and the associated uncertainties are assessed. Finally the fragility curves are combined with the seismic loading to estimate the frequency of failure for each critical scenario. The frequency of failure due to seismic event is presented by the scenario with the highest frequency. The tools usually applied for probabilistic safety analyses of critical structures could relatively easily be adopted to ordinary structures. The key problems are the seismic hazard definitions and the fragility analyses. The fragility could be derived either based on scaling procedures or on the base of generation. Both approaches have been presented in the paper. After the seismic risk (in terms of failure probability) is assessed there are several approaches for risk reduction. Generally the methods could be classified in two groups. The

The effect of aloe vera bioactive level as feed additive on the egg performances of laying hens

Directory of Open Access Journals (Sweden)

I.A.K Bintang

2005-06-01

Full Text Available A study on the use of aloe vera bioactives as feed additive in layer ration was conducted. One hundred and twenty pullets strain Isa Brown were allocated into 5 treatments with 6 replicates and 4 birds/replicate. The treatments were: control,control+antibiotic (50 ppm zinc bacitracin, and control+ aloe vera at three levels (0.25; 0.50 and 1.00 g/kg. The treatments were conducted in a completely randomized design. Parameter measured were first initial body weight, age at 1st lay, feed intake, egg weight, hen day (%HD and feed conversion ratio. The results showed that antibiotic and aloe vera used as additive for 9 months production did not significantly (P<0.05 affect all parameter measured, except feed intake of hens fed diet containing 0.5 g/kg aloe vera was significantly (P<0.05 higher than control. The addition of aloe vera at 1.0 g/kg significantly (P<0.05 reduced the feed intake as compared with the control, aloe vera 0.25 and 0.50 g/kg. The used of aloe vera (1.00 g/kg produced egg weight significantly (P<0.05 higher than the control, and feed conversion ratio was significantly (P<0.05 better than the control and aloe vera (0.25 g/kg. It is concluded that the best treatment was the diet with aloe vera level at 1.00 g/kg. This treatment improved feed efficiency 8.40%.

Regulatory support activities of JNES by thermal-hydraulic and safety analyses

International Nuclear Information System (INIS)

Kasahara, Fumio

2008-01-01

Current status and some related topics on regulatory support activities of Japan Nuclear Energy Safety Organization (JNES) by thermal-hydraulic and safety analyses are reported. The safety of nuclear facilities is secured primarily by plant owners and operators. However, the regulatory body NISA (Nuclear and Industrial Safety Agency) has conducted a strict regulation to confirm the adequacy of the site condition as well as the basic and detailed design. The JNES has been conducting independent analyses from applicants (audit analyses, etc.) by direction of NISA and supporting its review. In addition to the audit analysis, thermal-hydraulic and safety analyses are used in such areas as analytical evaluation for investigation of causes of accidents and troubles, level 2 PSA for risk informed regulation, etc. Recent activities of audit analyses are for the application of Tsuruga 3 and 4 (APWR), the spent fuel storage facility for the establishment, and the LMFBR Monju for the core change. For the trouble event evaluation, the criticality accident analysis of Sika1 was carried out and the evaluation of effectiveness of accident management (AM) measure for Tomari 3 (PWR) and Monju was performed. The analytical codes for these evaluations are continuously revised by reflecting the state-of-art technical information and validated using the information provided by the data from JAEA, OECD project, etc. (author)

Contamination Levels and Identification of Bacteria in Milk Sampled from Three Regions of Tanzania: Evidence from Literature and Laboratory Analyses

Directory of Open Access Journals (Sweden)

G. Msalya

2017-01-01

Full Text Available Milk in Tanzania has been reported to be contaminated with large number of bacteria. This is because (1 milk is obtained from animals with unknown health status, (2 good milking and handling practices are to a large extent not observed, and (3 marketing and distribution are done in informal channels. These factors are potential causes of milk-borne diseases and milk quality loss. The aim of this study was to assess nutritional risks in milk as reported in literature over a period of 20 years and through analyses of samples collected during the present study. The issues highlighted in literature were high bacteria and coliform counts exceeding standard levels in East Africa, prevalence of bacteria and drug residues in milk, and adulteration. Based on performed analyses, total bacterial count 1.0×107 colony forming units per millilitre (cfu/ml and total coliform count 1.1×107 cfu/ml, also greater than recommended levels, were found. Ten bacteria types were isolated from milk samples (five, Pseudomonas aeruginosa, Listeria monocytogenes, Listeria innocua, Listeria ivanovii, and Klebsiella spp. are reported in Tanzanian for the first time. Two drugs tetracycline and sulphur were detected. Therefore, it is worth noting that integrated research is needed to evaluate the situation and address these challenges.

FY01 Supplemental Science and Performance Analysis: Volume 1, Scientific Bases and Analyses

International Nuclear Information System (INIS)

Bodvarsson, G.S.; Dobson, David

2001-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S and ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S and ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S and ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054 [DIRS 124754

FY01 Supplemental Science and Performance Analysis: Volume 1,Scientific Bases and Analyses

Energy Technology Data Exchange (ETDEWEB)

Bodvarsson, G.S.; Dobson, David

2001-05-30

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S&ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S&ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S&ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054 [DIRS 124754

Socioeconomic issues and analyses for radioactive waste disposal facilities

International Nuclear Information System (INIS)

Ulland, L.

1988-01-01

Radioactive Waste facility siting and development can raise major social and economic issues in the host area. Initial site screening and analyses have been conducted for both potential high-level and low-level radioactive waste facilities; more detailed characterization and analyses are being planned. Results of these assessments are key to developing community plans that identify and implement measures to mitigate adverse socioeconomic impacts. Preliminary impact analyses conducted at high-level sites in Texas and Nevada, and site screening activities for low-level facilities in Illinois and California have identified a number of common socioeconomic issues and characteristics as well as issues and characteristics that differ between the sites and the type of facilities. Based on these comparisons, implications for selection of an appropriate methodology for impact assessment and elements of impact mitigation are identified

Choosing channel quantization levels and viterbi decoding for space diversity reception over the additive white Guassian noise channel

Science.gov (United States)

Kalson, S.

1986-01-01

Previous work in the area of choosing channel quantization levels for a additive white Gaussian noise channel composed of one receiver-demodulator is reviewed, and how this applies to the Deep Space Network composed of several receiver-demodulators (space diversity reception) is shown. Viterbi decoding for the resulting quantized channel is discussed.

Multi-element isotope dilution analyses using ICP-MS

International Nuclear Information System (INIS)

Volpe, A.M.

1996-01-01

Presently, 37 elements ranging from light (Li,B) through transition metals, noble, rare earth and heavy elements, to actinides and transuranics (Pu, Am, Cm) are measured by isotope dilution at Lawrence Livermore National Laboratory. Projects range from geological and hydrological to biological. The research goal is to measure accurately many elements present in diverse matrices at trace (ppb) levels using isotope dilution methods. Major advantages of isotope dilution methods are accuracy, elimination of ion intensity calibration, and quantitation for samples that require chemical separation. Accuracy depends on tracer isotope calibration, tracer-sample isotopic equilibration, and appropriate background, isobaric and mass bias corrections. Propagation of isotope ratio error due to improper tracer isotope addition is a major concern with multi-element analyses when abundances vary widely. 11 refs., 3 figs

Integrated tokamak modelling with the fast-ion Fokker–Planck solver adapted for transient analyses

International Nuclear Information System (INIS)

Toma, M; Hamamatsu, K; Hayashi, N; Honda, M; Ide, S

2015-01-01

Integrated tokamak modelling that enables the simulation of an entire discharge period is indispensable for designing advanced tokamak plasmas. For this purpose, we extend the integrated code TOPICS to make it more suitable for transient analyses in the fast-ion part. The fast-ion Fokker–Planck solver is integrated into TOPICS at the same level as the bulk transport solver so that the time evolutions of the fast ion and the bulk plasma are consistent with each other as well as with the equilibrium magnetic field. The fast-ion solver simultaneously handles neutral beam-injected ions and alpha particles. Parallelisation of the fast-ion solver in addition to its computational lightness owing to a dimensional reduction in the phase space enables transient analyses for long periods in the order of tens of seconds. The fast-ion Fokker–Planck calculation is compared and confirmed to be in good agreement with an orbit following a Monte Carlo calculation. The integrated code is applied to ramp-up simulations for JT-60SA and ITER to confirm its capability and effectiveness in transient analyses. In the integrated simulations, the coupled evolution of the fast ions, plasma profiles, and equilibrium magnetic fields are presented. In addition, the electric acceleration effect on fast ions is shown and discussed. (paper)

Anti-Vascular Endothelial Growth Factor Comparative Effectiveness Trial for Diabetic Macular Edema: Additional Efficacy Post Hoc Analyses of a Randomized Clinical Trial.

Science.gov (United States)

Jampol, Lee M; Glassman, Adam R; Bressler, Neil M; Wells, John A; Ayala, Allison R

2016-12-01

Post hoc analyses from the Diabetic Retinopathy Clinical Research Network randomized clinical trial comparing aflibercept, bevacizumab, and ranibizumab for diabetic macular edema (DME) might influence interpretation of study results. To provide additional outcomes comparing 3 anti-vascular endothelial growth factor (VEGF) agents for DME. Post hoc analyses performed from May 3, 2016, to June 21, 2016, of a randomized clinical trial performed from August 22, 2012, to September 23, 2015, of 660 participants comparing 3 anti-VEGF treatments in eyes with center-involved DME causing vision impairment. Randomization to intravitreous aflibercept (2.0 mg), bevacizumab (1.25 mg), or ranibizumab (0.3 mg) administered up to monthly based on a structured retreatment regimen. Focal/grid laser treatment was added after 6 months for the treatment of persistent DME. Change in visual acuity (VA) area under the curve and change in central subfield thickness (CST) within subgroups based on whether an eye received laser treatment for DME during the study. Post hoc analyses were performed for 660 participants (mean [SD] age, 61 [10] years; 47% female, 65% white, 16% black or African American, 16% Hispanic, and 3% other). For eyes with an initial VA of 20/50 or worse, VA improvement was greater with aflibercept than the other agents at 1 year but superior only to bevacizumab at 2 years. Mean (SD) letter change in VA over 2 years (area under curve) was greater with aflibercept (+17.1 [9.7]) than with bevacizumab (+12.1 [9.4]; 95% CI, +1.6 to +7.3; P grid laser treatment was performed for DME, the only participants to have a substantial reduction in mean CST between 1 and 2 years were those with a baseline VA of 20/50 or worse receiving bevacizumab and laser treatment (mean [SD], -55 [108] µm; 95% CI, -82 to -28 µm; P grid laser treatment, ceiling and floor effects, or both may account for mean thickness reductions noted only in bevacizumab-treated eyes between 1 and 2 years

Temporal scaling and spatial statistical analyses of groundwater level fluctuations

Science.gov (United States)

Sun, H.; Yuan, L., Sr.; Zhang, Y.

2017-12-01

Natural dynamics such as groundwater level fluctuations can exhibit multifractionality and/or multifractality due likely to multi-scale aquifer heterogeneity and controlling factors, whose statistics requires efficient quantification methods. This study explores multifractionality and non-Gaussian properties in groundwater dynamics expressed by time series of daily level fluctuation at three wells located in the lower Mississippi valley, after removing the seasonal cycle in the temporal scaling and spatial statistical analysis. First, using the time-scale multifractional analysis, a systematic statistical method is developed to analyze groundwater level fluctuations quantified by the time-scale local Hurst exponent (TS-LHE). Results show that the TS-LHE does not remain constant, implying the fractal-scaling behavior changing with time and location. Hence, we can distinguish the potentially location-dependent scaling feature, which may characterize the hydrology dynamic system. Second, spatial statistical analysis shows that the increment of groundwater level fluctuations exhibits a heavy tailed, non-Gaussian distribution, which can be better quantified by a Lévy stable distribution. Monte Carlo simulations of the fluctuation process also show that the linear fractional stable motion model can well depict the transient dynamics (i.e., fractal non-Gaussian property) of groundwater level, while fractional Brownian motion is inadequate to describe natural processes with anomalous dynamics. Analysis of temporal scaling and spatial statistics therefore may provide useful information and quantification to understand further the nature of complex dynamics in hydrology.

The behaviour of molybdenum dialkyldithiocarbamate friction modifier additives

International Nuclear Information System (INIS)

Graham, Jocelyn Claire Herries

2001-01-01

In recent years there has been growing concern to produce energy-efficient lubricated components and modem engine oil specifications require lubricants to demonstrate fuel efficiency in standardised engine tests. One important method of producing low friction and thus fuel-efficient lubricants is to use oil-soluble, molybdenum-containing, friction modifier additives. In optimal conditions these additives are able to produce very low friction coefficients, in the range 0.045 to 0.075 in boundary lubrication conditions. Very little is known about the chemical and physical mechanisms by which oil soluble molybdenum additives form low friction films in tribological contacts. Information about their activity could lead to optimal use of these additives in lubricants and, therefore, more efficient engine running. The work outlined in this thesis investigated the behaviour of oil-soluble molybdenum additives and showed that these additives were able to effectively reduce friction in the absence of other additives such as ZnDTP. Their activity was shown to be highly concentration and temperature dependent and was also found to be sensitive to the roughness of the contacting surfaces. Raman spectroscopy was used to analyse the chemical nature of molybdenum-containing reaction films and found that friction reduction indubitably arises from the local formation of platelets (diameter 30-50 nm) of MoS 2 . The formation of MoS 2 -rich films was found to occur only during direct asperity-asperity rubbing of the contacting surfaces (this type of contact being especially prevalent in pure sliding contacts). At elevated temperatures and in the presence of oxidising gases the consumption of MoDTC was monitored. MoDTC concentration dropped until the total value fell below a critical level to reduce friction. The study showed that decay rate of molybdenum-containing species was reduced by the addition of peroxide-decomposing antioxidants. (author)

Quail egg yield and quality of the Coturnix coturnix response to the addition level of agave inulin to the drinking water

Directory of Open Access Journals (Sweden)

Luis Jorge Pérez de la Mora

2014-05-01

Full Text Available To assess the effect of agave inulin addition to drinking water, one hundred (65 days old Coturnix coturnix japonica hens were divided randomly into four groups with five birds per cage. Twenty five birds were assigned to each of the following treatments: i control; addition of agave inulin in the drinking water at; ii 2.0% (w/w, iii 4.0%; and iv 6%. The feeding trial lasted for six weeks. Inulin increased (P0.05. The egg weight was similar among treatments (average 12.70 g and varied slightly with the inulin level (P=0.0537. The egg shell (percentage of the egg was not influenced by the inulin. But, the calcium concentration in the eggshell of the present trial varied with the level on the agave inulin in the drinking water (P0.05. Then, the agave inulin addition to the drinking water increases the egg yield of Japanese quails.

Parametric stress analyses for low-level liquid radwaste system piping of ITER subjected to seismic displacements

Energy Technology Data Exchange (ETDEWEB)

Chang, Yoon-Suk [Department of Nuclear Engineering, Kyung Hee University, Yongin (Korea, Republic of); Oh, Chang-Kyun [Materials Engineering Department, KEPCO E& C, Yongin (Korea, Republic of); Kim, Hyun-Su, E-mail: hyunsu@kepco-enc.com [Materials Engineering Department, KEPCO E& C, Yongin (Korea, Republic of)

2015-10-15

The ITER project is aimed at demonstrating the feasibility of fusion as one of the possible energy options. A layout optimization is one of the design concerns for maintaining safety and reliability of the piping, because some piping penetrating the buildings is subjected to large seismic displacements. The objective of this study is to determine an optimum layout for the radioactive liquid transfer piping to withstand a given seismic displacements combined with internal pressure and thermal expansion. To do this, a series of finite element analyses were performed for various layouts. In addition, the feasibility for utilizing the double-walled structure was investigated. Analysis result shows that effects of the internal pressure and thermal expansion on the total stress are very small compared to that of the seismic displacements. Also, the stress as well as the deformation of the double-walled piping is larger than that of the single-walled piping although the difference is not big. Based on this result, an optimum configuration, a spiral along with U shape, is suggested.

Extracting physics of life at the molecular level: A review of single-molecule data analyses.

Science.gov (United States)

Colomb, Warren; Sarkar, Susanta K

2015-06-01

Studying individual biomolecules at the single-molecule level has proved very insightful recently. Single-molecule experiments allow us to probe both the equilibrium and nonequilibrium properties as well as make quantitative connections with ensemble experiments and equilibrium thermodynamics. However, it is important to be careful about the analysis of single-molecule data because of the noise present and the lack of theoretical framework for processes far away from equilibrium. Biomolecular motion, whether it is free in solution, on a substrate, or under force, involves thermal fluctuations in varying degrees, which makes the motion noisy. In addition, the noise from the experimental setup makes it even more complex. The details of biologically relevant interactions, conformational dynamics, and activities are hidden in the noisy single-molecule data. As such, extracting biological insights from noisy data is still an active area of research. In this review, we will focus on analyzing both fluorescence-based and force-based single-molecule experiments and gaining biological insights at the single-molecule level. Inherently nonequilibrium nature of biological processes will be highlighted. Simulated trajectories of biomolecular diffusion will be used to compare and validate various analysis techniques. Copyright © 2015 Elsevier B.V. All rights reserved.

The Influence of Study-Level Inference Models and Study Set Size on Coordinate-Based fMRI Meta-Analyses

Directory of Open Access Journals (Sweden)

Han Bossier

2018-01-01

Full Text Available Given the increasing amount of neuroimaging studies, there is a growing need to summarize published results. Coordinate-based meta-analyses use the locations of statistically significant local maxima with possibly the associated effect sizes to aggregate studies. In this paper, we investigate the influence of key characteristics of a coordinate-based meta-analysis on (1 the balance between false and true positives and (2 the activation reliability of the outcome from a coordinate-based meta-analysis. More particularly, we consider the influence of the chosen group level model at the study level [fixed effects, ordinary least squares (OLS, or mixed effects models], the type of coordinate-based meta-analysis [Activation Likelihood Estimation (ALE that only uses peak locations, fixed effects, and random effects meta-analysis that take into account both peak location and height] and the amount of studies included in the analysis (from 10 to 35. To do this, we apply a resampling scheme on a large dataset (N = 1,400 to create a test condition and compare this with an independent evaluation condition. The test condition corresponds to subsampling participants into studies and combine these using meta-analyses. The evaluation condition corresponds to a high-powered group analysis. We observe the best performance when using mixed effects models in individual studies combined with a random effects meta-analysis. Moreover the performance increases with the number of studies included in the meta-analysis. When peak height is not taken into consideration, we show that the popular ALE procedure is a good alternative in terms of the balance between type I and II errors. However, it requires more studies compared to other procedures in terms of activation reliability. Finally, we discuss the differences, interpretations, and limitations of our results.

Publication bias in dermatology systematic reviews and meta-analyses.

Science.gov (United States)

Atakpo, Paul; Vassar, Matt

2016-05-01

Systematic reviews and meta-analyses in dermatology provide high-level evidence for clinicians and policy makers that influence clinical decision making and treatment guidelines. One methodological problem with systematic reviews is the under representation of unpublished studies. This problem is due in part to publication bias. Omission of statistically non-significant data from meta-analyses may result in overestimation of treatment effect sizes which may lead to clinical consequences. Our goal was to assess whether systematic reviewers in dermatology evaluate and report publication bias. Further, we wanted to conduct our own evaluation of publication bias on meta-analyses that failed to do so. Our study considered systematic reviews and meta-analyses from ten dermatology journals from 2006 to 2016. A PubMed search was conducted, and all full-text articles that met our inclusion criteria were retrieved and coded by the primary author. 293 articles were included in our analysis. Additionally, we formally evaluated publication bias in meta-analyses that failed to do so using trim and fill and cumulative meta-analysis by precision methods. Publication bias was mentioned in 107 articles (36.5%) and was formally evaluated in 64 articles (21.8%). Visual inspection of a funnel plot was the most common method of evaluating publication bias. Publication bias was present in 45 articles (15.3%), not present in 57 articles (19.5%) and not determined in 191 articles (65.2%). Using the trim and fill method, 7 meta-analyses (33.33%) showed evidence of publication bias. Although the trim and fill method only found evidence of publication bias in 7 meta-analyses, the cumulative meta-analysis by precision method found evidence of publication bias in 15 meta-analyses (71.4%). Many of the reviews in our study did not mention or evaluate publication bias. Further, of the 42 articles that stated following PRISMA reporting guidelines, 19 (45.2%) evaluated for publication bias. In

PCDD/F and PCB levels in Austrian cow's milk

Energy Technology Data Exchange (ETDEWEB)

Thanner, G.; Moche, W. [Umweltbundesamt Wien (Austria)

2004-09-15

In 2003 the Federal Environment Agency carried out a first Austrian wide milk monitoring study with the objective to get an overview of average PCDD/F levels in cow's milk, additionally dioxinlike PCBs, according to WHO, and indicator PCBs, as listed by national regulations, were analysed.

Between and beyond additivity and non-additivity : the statistical modelling of genotype by environment interaction in plant breeding

OpenAIRE

Eeuwijk, van, F.A.

1996-01-01

In plant breeding it is a common observation to see genotypes react differently to environmental changes. This phenomenon is called genotype by environment interaction. Many statistical approaches for analysing genotype by environment interaction rely heavily on the analysis of variance model. Genotype by environment interaction is then taken to be equivalent to non-additivity. This thesis criticizes the analysis of variance approach. Modelling genotype by environment interaction by non-addit...

The radiation analyses of ITER lower ports

International Nuclear Information System (INIS)

Petrizzi, L.; Brolatti, G.; Martin, A.; Loughlin, M.; Moro, F.; Villari, R.

2010-01-01

The ITER Vacuum Vessel has upper, equatorial, and lower ports used for equipment installation, diagnostics, heating and current drive systems, cryo-vacuum pumping, and access inside the vessel for maintenance. At the level of the divertor, the nine lower ports for remote handling, cryo-vacuum pumping and diagnostic are inclined downwards and toroidally located each every 40 o . The cryopump port has additionally a branch to allocate a second cryopump. The ports, as openings in the Vacuum Vessel, permit radiation streaming out of the vessel which affects the heating in the components in the outer regions of the machine inside and outside the ports. Safety concerns are also raised with respect to the dose after shutdown at the cryostat behind the ports: in such zones the radiation dose level must be kept below the regulatory limit to allow personnel access for maintenance purposes. Neutronic analyses have been required to qualify the ITER project related to the lower ports. A 3-D model was used to take into account full details of the ports and the lower machine surroundings. MCNP version 5 1.40 has been used with the FENDL 2.1 nuclear data library. The ITER 40 o model distributed by the ITER Organization was developed in the lower part to include the relevant details. The results of a first analysis, focused on cryopump system only, were recently published. In this paper more complete data on the cryopump port and analysis for the remote handling port and the diagnostic rack are presented; the results of both analyses give a complete map of the radiation loads in the outer divertor ports. Nuclear heating, dpa, tritium production, and dose rates after shutdown are provided and the implications for the design are discussed.

POEM: Identifying joint additive effects on regulatory circuits

Directory of Open Access Journals (Sweden)

Maya eBotzman

2016-04-01

Full Text Available Motivation: Expression Quantitative Trait Locus (eQTL mapping tackles the problem of identifying variation in DNA sequence that have an effect on the transcriptional regulatory network. Major computational efforts are aimed at characterizing the joint effects of several eQTLs acting in concert to govern the expression of the same genes. Yet, progress towards a comprehensive prediction of such joint effects is limited. For example, existing eQTL methods commonly discover interacting loci affecting the expression levels of a module of co-regulated genes. Such ‘modularization’ approaches, however, are focused on epistatic relations and thus have limited utility for the case of additive (non-epistatic effects.Results: Here we present POEM (Pairwise effect On Expression Modules, a methodology for identifying pairwise eQTL effects on gene modules. POEM is specifically designed to achieve high performance in the case of additive joint effects. We applied POEM to transcription profiles measured in bone marrow-derived dendritic cells across a population of genotyped mice. Our study reveals widespread additive, trans-acting pairwise effects on gene modules, characterizes their organizational principles, and highlights high-order interconnections between modules within the immune signaling network. These analyses elucidate the central role of additive pairwise effect in regulatory circuits, and provide computational tools for future investigations into the interplay between eQTLs.Availability: The software described in this article is available at csgi.tau.ac.il/POEM/.

Genetic evidence of a causal effect of insulin resistance on branched-chain amino acid levels.

Science.gov (United States)

Mahendran, Yuvaraj; Jonsson, Anna; Have, Christian T; Allin, Kristine H; Witte, Daniel R; Jørgensen, Marit E; Grarup, Niels; Pedersen, Oluf; Kilpeläinen, Tuomas O; Hansen, Torben

2017-05-01

Fasting plasma levels of branched-chain amino acids (BCAAs) are associated with insulin resistance, but it remains unclear whether there is a causal relation between the two. We aimed to disentangle the causal relations by performing a Mendelian randomisation study using genetic variants associated with circulating BCAA levels and insulin resistance as instrumental variables. We measured circulating BCAA levels in blood plasma by NMR spectroscopy in 1,321 individuals from the ADDITION-PRO cohort. We complemented our analyses by using previously published genome-wide association study (GWAS) results from the Meta-Analyses of Glucose and Insulin-related traits Consortium (MAGIC) (n = 46,186) and from a GWAS of serum BCAA levels (n = 24,925). We used a genetic risk score (GRS), calculated using ten established fasting serum insulin associated variants, as an instrumental variable for insulin resistance. A GRS of three variants increasing circulating BCAA levels was used as an instrumental variable for circulating BCAA levels. Fasting plasma BCAA levels were associated with higher HOMA-IR in ADDITION-PRO (β 0.137 [95% CI 0.08, 0.19] p = 6 × 10 -7 ). However, the GRS for circulating BCAA levels was not associated with fasting insulin levels or HOMA-IR in ADDITION-PRO (β -0.011 [95% CI -0.053, 0.032] p = 0.6 and β -0.011 [95% CI -0.054, 0.031] p = 0.6, respectively) or in GWAS results for HOMA-IR from MAGIC (β for valine-increasing GRS -0.012 [95% CI -0.069, 0.045] p = 0.7). By contrast, the insulin-resistance-increasing GRS was significantly associated with increased BCAA levels in ADDITION-PRO (β 0.027 [95% CI 0.005, 0.048] p = 0.01) and in GWAS results for serum BCAA levels (β 1.22 [95% CI 0.71, 1.73] p = 4 × 10 -6 , β 0.96 [95% CI 0.45, 1.47] p = 3 × 10 -4 , and β 0.67 [95% CI 0.16, 1.18] p = 0.01 for isoleucine, leucine and valine levels, respectively) and instrumental variable analyses in ADDITION

Septic tank additive impacts on microbial populations.

Science.gov (United States)

Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

2008-01-01

Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

Development of Brassica oleracea-nigra monosomic alien addition lines: genotypic, cytological and morphological analyses.

Science.gov (United States)

Tan, Chen; Cui, Cheng; Xiang, Yi; Ge, Xianhong; Li, Zaiyun

2017-12-01

We report the development and characterization of Brassica oleracea - nigra monosomic alien addition lines (MAALs) to dissect the Brassica B genome. Brassica nigra (2n = 16, BB) represents the diploid Brassica B genome which carries many useful genes and traits for breeding but received limited studies. To dissect the B genome from B. nigra, the triploid F 1 hybrid (2n = 26, CCB) obtained previously from the cross B. oleracea var. alboglabra (2n = 18, CC) × B. nigra was used as the maternal parent and backcrossed successively to parental B. oleracea. The progenies in BC 1 to BC 3 generations were analyzed by the methods of FISH and SSR markers to screen the monosomic alien addition lines (MAALs) with each of eight different B-genome chromosomes added to C genome (2n = 19, CC + 1B 1-8 ), and seven different MAALs were established, except for the one with chromosome B2 which existed in one triple addition. Most of these MAALs were distinguishable morphologically from each other, as they expressed the characters from B. nigra differently and at variable extents. The alien chromosome remained unpaired as a univalent in 86.24% pollen mother cells at diakinesis or metaphase I, and formed a trivalent with two C-genome chromosomes in 13.76% cells. Transmission frequency of all the added chromosomes was far higher through the ovules (averagely 14.40%) than the pollen (2.64%). The B1, B4 and B5 chromosomes were transmitted by female at much higher rates (22.38-30.00%) than the other four (B3, B6, B7, B8) (5.04-8.42%). The MAALs should be valuable for exploiting the genome structure and evolution of B. nigra.

Supplemental Performance Analyses for the Potential High-Level Nuclear Waste Repository at Yucca Mountain

International Nuclear Information System (INIS)

Sevougian, S. D.; McNeish, J. A.; Coppersmith, K.; Jenni, K. E.; Rickertsen, L. D.; Swift, P. N.; Wilson, M. L.

2002-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for the potential development of a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S and ER) (1), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. Based on internal reviews of the S and ER and its key supporting references, the Total System Performance Assessment for the Site Recommendation (TSPA-SR) (2) and the Analysis Model Reports and Process Model Reports cited therein, the DOE has recently identified and performed several types of analyses to supplement the treatment of uncertainty in support of the consideration of a possible site recommendation. The results of these new analyses are summarized in the two-volume report entitled FY01 Supplemental Science and Performance Analysis (SSPA) (3,4). The information in this report is intended to supplement, not supplant, the information contained in the S and ER. The DOE recognizes that important uncertainties will always remain in any assessment of the performance of a potential repository over thousands of years (1). One part of the DOE approach to recognizing and managing these uncertainties is a commitment to continued testing and analysis and to the continued evaluation of the technical basis supporting the possible recommendation of the site, such as the analysis contained in the SSPA. The goals of the work described here are to provide insights into the implications of newly quantified uncertainties, updated science, and evaluations of lower operating temperatures on the performance of a potential Yucca Mountain repository and to increase confidence in the results of the TSPA described

The effect of different levels of sunflower head pith addition on the properties of model system emulsions prepared from fresh and frozen beef.

Science.gov (United States)

Sariçoban, Cemalettin; Yilmaz, Mustafa Tahsin; Karakaya, Mustafa; Tiske, Sümeyra Sultan

2010-01-01

The effect of sunflower head pith on the functional properties of emulsions was studied by using a model system. Oil/water (O/W) model emulsion systems were prepared from fresh and frozen beef by the addition of the pith at five concentrations. Emulsion capacity (EC), stability (ES), viscosity (EV), colour and flow properties of the prepared model system emulsions were analyzed. The pith addition increased the EC and ES and the highest EC and ES values were reached when 5% of pith added; however, further increase in the pith concentration caused an inverse trend in these values. Fresh beef emulsions had higher EC and ES values than did frozen beef emulsions. One percent pith concentration was the critic level for the EV values of fresh beef emulsions. EV values of the emulsions reached a maximum level at 5% pith level, followed by a decrease at 7% pit level.

Does Polycystic Ovary Syndrome Itself Have Additional Effect on Apelin Levels?

Directory of Open Access Journals (Sweden)

Dilek Benk Silfeler

2014-01-01

Full Text Available Objective. The present study was designed to compare serum levels of apelin between lean PCOS women and healthy women with regular menses. Study Design. A total of 30 lean patients with PCOS and 30 healthy subjects were included in this study. Serum apelin levels were compared between groups. Results. Serum apelin levels in lean PCOS patients were not significantly different from the control subjects. Conclusion. Our findings indicate that PCOS itself does not seem to change apelin levels. Further investigation on a large number of subjects will need to be conducted to prove the consistent or variable association in PCOS.

Conventional and advanced exergetic analyses applied to a combined cycle power plant

International Nuclear Information System (INIS)

Petrakopoulou, Fontina; Tsatsaronis, George; Morosuk, Tatiana; Carassai, Anna

2012-01-01

Conventional exergy-based methods pinpoint components and processes with high irreversibilities. However, they lack certain insight. For a given advanced technological state, there is a minimum level of exergy destruction related to technological and/or economic constraints that is unavoidable. Furthermore, in any thermodynamic system, exergy destruction stems from both component interactions (exogenous) and component inefficiencies (endogenous). To overcome the limitations of the conventional analyses and to increase our knowledge about a plant, advanced exergy-based analyses have been developed. In this paper, a combined cycle power plant is analyzed using both conventional and advanced exergetic analyses. Except for the expander of the gas turbine system and the high-pressure steam turbine, most of the exergy destruction in the plant components is unavoidable. This unavoidable part is constrained by internal technological limitations, i.e. each component’s endogenous exergy destruction. High levels of endogenous exergy destruction show that component interactions do not contribute significantly to the thermodynamic inefficiencies. In addition, these inefficiencies are unavoidable to a large extent. With the advanced analysis, new improvement strategies are revealed that could not otherwise be found. -- Highlights: ► This is the first application of a complete advanced exergetic analysis to a complex power plant. ► In the three-pressure-level combined cycle power plant studied here, the improvement potential of the majority of the components is low, since most of the exergy destruction is unavoidable. ► Component interactions are generally of lower importance for the considered plant. ► Splitting the exogenous exergy destruction reveals one-to-one component interactions and improvement strategies. ► The advanced exergetic analysis is a necessary supplement to the conventional analysis in improving a complex system.

Protein Expression Analyses at the Single Cell Level

Directory of Open Access Journals (Sweden)

Masae Ohno

2014-09-01

Full Text Available The central dogma of molecular biology explains how genetic information is converted into its end product, proteins, which are responsible for the phenotypic state of the cell. Along with the protein type, the phenotypic state depends on the protein copy number. Therefore, quantification of the protein expression in a single cell is critical for quantitative characterization of the phenotypic states. Protein expression is typically a dynamic and stochastic phenomenon that cannot be well described by standard experimental methods. As an alternative, fluorescence imaging is being explored for the study of protein expression, because of its high sensitivity and high throughput. Here we review key recent progresses in fluorescence imaging-based methods and discuss their application to proteome analysis at the single cell level.

Analyse of Maintenance Cost in ST

CERN Document Server

Jenssen, B W

2001-01-01

An analyse has been carried out in ST concerning the total costs for the division. Even though the target was the maintenance costs in ST, the global budget over has been analysed. This has been done since there is close relation between investments & consolidation and the required level for maintenance. The purpose of the analyse was to focus on maintenance cost in ST as a ratio of total maintenance costs over the replacement value of the equipment, and to make some comparisons with other industries and laboratories. Families of equipment have been defined and their corresponding ratios calculated. This first approach gives us some "quantitative" measurements. This analyse should be combined with performance indicators (more "qualitative" measurements) that are telling us how well we are performing. This will help us in defending our budget, make better priorities, and we will satisfy the requirements from our external auditors.

Automated monosegmented flow analyser. Determination of glucose, creatinine and urea.

Science.gov (United States)

Raimundo Júnior, I M; Pasquini, C

1997-10-01

An automated monosegmented flow analyser containing a sampling valve and a reagent addition module and employing a laboratory-made photodiode array spectrophotometer as detection system is described. The instrument was controlled by a 386SX IBM compatible microcomputer through an IC8255 parallel port that communicates with the interface which controls the sampling valve and reagent addition module. The spectrophotometer was controlled by the same microcomputer through an RS232 serial standard interface. The software for the instrument was written in QuickBasic 4.5. Opto-switches were employed to detect the air bubbles limiting the monosegment, allowing precise sample localisation for reagent addition and signal reading. The main characteristics of the analyser are low reagent consumption and high sensitivity which is independent of the sample volume. The instrument was designed to determine glucose, creatinine or urea in blood plasma and serum without hardware modification. The results were compared against those obtained by the Clinical Hospital of UNICAMP using commercial analysers. Correlation coefficients among the methods were 0.997, 0.982 and 0.996 for glucose, creatinine and urea, respectively.

Mechanical analyses on the digital behaviour of the Tokay gecko (Gekko gecko) based on a multi-level directional adhesion model.

Science.gov (United States)

Wu, Xuan; Wang, Xiaojie; Mei, Tao; Sun, Shaoming

2015-07-08

This paper proposes a multi-level hierarchical model for the Tokay gecko ( Gekko gecko ) adhesive system and analyses the digital behaviour of the G. gecko under macro/meso-level scale. The model describes the structures of G. gecko 's adhesive system from the nano-level spatulae to the sub-millimetre-level lamella. The G. gecko 's seta is modelled using inextensible fibril based on Euler's elastica theorem. Considering the side contact of the spatular pads of the seta on the flat and rigid substrate, the directional adhesion behaviour of the seta has been investigated. The lamella-induced attachment and detachment have been modelled to simulate the active digital hyperextension (DH) and the digital gripping (DG) phenomena. The results suggest that a tiny angular displacement within 0.25° of the lamellar proximal end is necessary in which a fast transition from attachment to detachment or vice versa is induced. The active DH helps release the torque to induce setal non-sliding detachment, while the DG helps apply torque to make the setal adhesion stable. The lamella plays a key role in saving energy during detachment to adapt to its habitat and provides another adhesive function which differs from the friction-dependent setal adhesion system controlled by the dynamic of G. gecko 's body.

Using depleted uranium to shield vitrified high-level waste packages

International Nuclear Information System (INIS)

Yoshimura, H.R.; Gildea, P.D.; Bernard, E.A.

1995-01-01

The underlying report for this paper evaluates options for using depleted uranium as shielding materials for transport systems for disposal of vitrified high-level waste (VHLW). In addition, economic analyses are presented to compare costs associated with these options to costs, associated with existing and proposed storage, transport, and diposal capabilities. A more detailed evaluation is provided elsewhere. (Yoshimura et al. 1995.)

Far-Field Acoustic Power Level and Performance Analyses of F31/A31 Open Rotor Model at Simulated Scaled Takeoff, Nominal Takeoff, and Approach Conditions: Technical Report I

Science.gov (United States)

Sree, Dave

2015-01-01

Far-field acoustic power level and performance analyses of open rotor model F31/A31 have been performed to determine its noise characteristics at simulated scaled takeoff, nominal takeoff, and approach flight conditions. The nonproprietary parts of the data obtained from experiments in 9- by 15-Foot Low-Speed Wind Tunnel (9?15 LSWT) tests were provided by NASA Glenn Research Center to perform the analyses. The tone and broadband noise components have been separated from raw test data by using a new data analysis tool. Results in terms of sound pressure levels, acoustic power levels, and their variations with rotor speed, angle of attack, thrust, and input shaft power have been presented and discussed. The effect of an upstream pylon on the noise levels of the model has been addressed. Empirical equations relating model's acoustic power level, thrust, and input shaft power have been developed. The far-field acoustic efficiency of the model is also determined for various simulated flight conditions. It is intended that the results presented in this work will serve as a database for comparison and improvement of other open rotor blade designs and also for validating open rotor noise prediction codes.

A Scintillation Camera and 1600-Channel Analyser for the Diagnosis of Metastatic Cancer of the Liver

Energy Technology Data Exchange (ETDEWEB)

Jasinski, W. K.; Malinowska, J.; Mackiewicz, H.; Siwicki, H.; Tolwinski, J. [Institute of Oncology, Warsaw (Poland)

1969-05-15

A series of 59 consecutive cases of histologically proven breast cancer were admitted.for radiotherapy. The group was mostly composed of stage III/TNM. The patients were studied with a scintillation camera and a 1600-channel analyser after i. v. injection of 2mCi of colloidal {sup 99m}Tc. Up to 104 counts were accumulated in one of the elements of the analyser matrix and were then transferred to computer-compatible punched tape. The data could be presented immediately in a number of different ways: (a) as conventional scintigraphic pictures on the camera's oscilloscope; (b) as nine pictures from the analyser's oscilloscope with 10, 20, 30... 90% of the counts erased; and (c) as one picture with those four selected levels of erase which were considered best, for a given case. In addition, progressive increase of exposure and defocusing of each level was possible. Examination with colloidal {sup 99m}Tc was found to be a safe method for the detection of malignant secondaries in the liver because of the low irradiation dose to the patient. The high radioactivity accumulated in the liver means a short examination time and the elimination of statistical fluctuations. Furthermore, the stored information enables the time-consuming work to be done in the patient's absence. (author)

Ionizing radiation effects of Cobalt-60 on the physical-chemical, sensorial and microbiological of bread with addition of linseed (Linum usitatissimum)

International Nuclear Information System (INIS)

Moura, Neila Camargo de

2011-01-01

The incorporation of functional ingredients on breading products has grown very much lately, because of the preoccupation with the consumers' health. The linseed has awakened the interest by its high level of fiber, lignin, omega-3 and antioxidants compounds. The objective of the present work is evaluate the ionizing radiation effect of 60 Co on the physical-chemical, sensorial and microbiological characteristics of bread with addition of different concentration of brown linseed. There were elaborated 3 types of bread: French roll, form bread prepared with the mixture and form bread produced with conventional ingredients. It was added smashed brown linseed on the bread dough, with concentrations of 8% and 12%. After the preparation, the three kinds of bread packed with polypropylene packages and taken to the IPEN/USP (Institute of Nuclear Energetic Research/University of São Paulo) and irradiated with doses of 6, 8 and 10 kGy. Treatments were elaborated without the addition of linseed and without irradiation, for control, totalizing 12 distinct treatments, to each bread formula tested. Chemical analyses were made (centesimal composition, anti-nutritional compounds, anti-oxidant activity, glycemic index, fat acids, complex B vitamins and minerals); physical analyses (cooking index, volume, color and water activity); sensorial analyses (preference tests and Descriptive Quantitative Analysis - ADQ); microbiological analysis and a survey about irradiated products. It could be seen that the addition of linseed was efficient to increase the level of alimentary fiber and the level of lipids on the 3 bread formula. The three kinds of bread that received the linseed addition and that were not irradiated presented increase on the level of total phenolic; however, when the samples which received the linseed addition were submitted to the irradiation process, it could be noticed the decrease of the antioxidant capacity. There was an increase on the level of omega-3

Additive Interaction between Heterogeneous Environmental Quality Domains (Air, Water, Land, Sociodemographic, and Built Environment) on Preterm Birth.

Science.gov (United States)

Grabich, Shannon C; Rappazzo, Kristen M; Gray, Christine L; Jagai, Jyotsna S; Jian, Yun; Messer, Lynne C; Lobdell, Danelle T

2016-01-01

Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000 to 2005. The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built, and sociodemographic) using principal component analyses. County-level preterm birth rates ( n  = 3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PDs) and 95% confidence intervals (CIs) comparing worse environmental quality to the better quality for each model for (a) each individual domain main effect, (b) the interaction contrast, and (c) the two main effects plus interaction effect (i.e., the "net effect") to show departure from additivity for the all U.S. counties. Analyses were also performed for subgroupings by four urban/rural strata. We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interactions, between the sociodemographic/air domains [net effect (i.e., the association, including main effects and interaction effects) PD: -0.004 (95% CI: -0.007, 0.000), interaction contrast: -0.013 (95% CI: -0.020, -0.007)] and built/air domains [net effect PD: 0.008 (95% CI 0.004, 0.011), interaction contrast: -0.008 (95% CI: -0.015, -0.002)]. Most interactions were between the air domain and other respective domains. Interactions differed by urbanicity, with more interactions observed in non-metropolitan regions. Observed

Additive interaction between heterogeneous environmental quality domains (air, water, land, sociodemographic and built environment on preterm birth

Directory of Open Access Journals (Sweden)

Shannon Grabich

2016-10-01

Full Text Available BACKGROUND Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI domain indices on preterm birth in the Unites States from 2000-2005.METHODS: The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built and sociodemographic using principal component analyses. County-level preterm birth rates (n=3141 were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PD and 95% confidence intervals (CI comparing worse environmental quality to the better quality for each model for a each individual domain main effect b the interaction contrast and c the two main effects plus interaction effect (i.e., the net effect to show departure from additivity for the all U.S counties. Analyses were also performed for subgroupings by four urban/rural strata. RESULTS: We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction associations. In the non-stratified model, we observed antagonistic interactions, between the sociodemographic/air domains (net effect (i.e. the association including main effects and interaction effects PD: -0.004 (95% CI:-0.007, 0.000, interaction contrast: -0.013 (95% CI:-0.020, -0.007 and built/air domains (net effect PD: 0.008 (95% CI 0.004, 0.011, interaction contrast: -0.008 (95% CI:-0.015, -0.002. Most interactions were between the air domain and other respective domains. Interactions differed by urbanicity, with more interactions observed in non-metropolitan regions

Markov counting and reward processes for analysing the performance of a complex system subject to random inspections

International Nuclear Information System (INIS)

Ruiz-Castro, Juan Eloy

2016-01-01

In this paper, a discrete complex reliability system subject to internal failures and external shocks, is modelled algorithmically. Two types of internal failure are considered: repairable and non-repairable. When a repairable failure occurs, the unit goes to corrective repair. In addition, the unit is subject to external shocks that may produce an aggravation of the internal degradation level, cumulative damage or extreme failure. When a damage threshold is reached, the unit must be removed. When a non-repairable failure occurs, the device is replaced by a new, identical one. The internal performance and the external damage are partitioned in performance levels. Random inspections are carried out. When an inspection takes place, the internal performance of the system and the damage caused by external shocks are observed and if necessary the unit is sent to preventive maintenance. If the inspection observes minor state for the internal performance and/or external damage, then these states remain in memory when the unit goes to corrective or preventive maintenance. Transient and stationary analyses are performed. Markov counting and reward processes are developed in computational form to analyse the performance and profitability of the system with and without preventive maintenance. These aspects are implemented computationally with Matlab. - Highlights: • A multi-state device is modelled in an algorithmic and computational form. • The performance is partitioned in multi-states and degradation levels. • Several types of failures with repair times according to degradation levels. • Preventive maintenance as response to random inspection is introduced. • The performance-profitable is analysed through Markov counting and reward processes.

Multi-level analyses of spatial and temporal determinants for dengue infection.

Science.gov (United States)

Vanwambeke, Sophie O; van Benthem, Birgit H B; Khantikul, Nardlada; Burghoorn-Maas, Chantal; Panart, Kamolwan; Oskam, Linda; Lambin, Eric F; Somboon, Pradya

2006-01-18

Dengue is a mosquito-borne viral infection that is now endemic in most tropical countries. In Thailand, dengue fever/dengue hemorrhagic fever is a leading cause of hospitalization and death among children. A longitudinal study among 1750 people in two rural and one urban sites in northern Thailand from 2001 to 2003 studied spatial and temporal determinants for recent dengue infection at three levels (time, individual and household). Determinants for dengue infection were measured by questionnaire, land-cover maps and GIS. IgM antibodies against dengue were detected by ELISA. Three-level multi-level analysis was used to study the risk determinants of recent dengue infection. Rates of recent dengue infection varied substantially in time from 4 to 30%, peaking in 2002. Determinants for recent dengue infection differed per site. Spatial clustering was observed, demonstrating variation in local infection patterns. Most of the variation in recent dengue infection was explained at the time-period level. Location of a person and the environment around the house (including irrigated fields and orchards) were important determinants for recent dengue infection. We showed the focal nature of asymptomatic dengue infections. The great variation of determinants for recent dengue infection in space and time should be taken into account when designing local dengue control programs.

Analysing Protocol Stacks for Services

DEFF Research Database (Denmark)

Gao, Han; Nielson, Flemming; Nielson, Hanne Riis

2011-01-01

We show an approach, CaPiTo, to model service-oriented applications using process algebras such that, on the one hand, we can achieve a certain level of abstraction without being overwhelmed by the underlying implementation details and, on the other hand, we respect the concrete industrial...... standards used for implementing the service-oriented applications. By doing so, we will be able to not only reason about applications at different levels of abstractions, but also to build a bridge between the views of researchers on formal methods and developers in industry. We apply our approach...... to the financial case study taken from Chapter 0-3. Finally, we develop a static analysis to analyse the security properties as they emerge at the level of concrete industrial protocols....

Plasma Glucose Level Is Predictive of Serum Ammonia Level After Retrograde Occlusion of Portosystemic Shunts.

Science.gov (United States)

Ishikawa, Tsuyoshi; Aibe, Yuki; Matsuda, Takashi; Iwamoto, Takuya; Takami, Taro; Sakaida, Isao

2017-09-01

The purpose of this study was to evaluate predictors of reduction in ammonia levels by occlusion of portosystemic shunts (PSS) in patients with cirrhosis. Forty-eight patients with cirrhosis (21 women, 27 men; mean age, 67.8 years) with PSS underwent balloon-occluded retrograde transvenous obliteration (BRTO) at one institution between February 2008 and June 2014. The causes of cirrhosis were hepatitis B in one case, hepatitis C in 20 cases, alcohol in 15 cases, nonalcoholic steatohepatitis in eight cases, and other conditions in four cases. The Child-Pugh classes were A in 24 cases, B in 23 cases, and C in one case. The indication for BRTO was gastric varices in 40 cases and hepatic encephalopathy in eight cases. Testing was conducted before and 1 month after the procedure. Statistical analyses were performed to identify predictors of a clinically significant decline in ammonia levels after BRTO. Occlusion of PSS resulted in a clinically significant decrease in ammonia levels accompanied by increased portal venous flow and improved Child-Pugh score. Univariate analyses showed that a reduction in ammonia levels due to BRTO was significantly related to lower plasma glucose levels, higher RBC counts, and higher hemoglobin concentration before the treatment. Furthermore, multivariate logistic regression identified preoperative plasma glucose level as the strongest independent predictor of a significant ammonia reduction in response to BRTO. In addition, although BRTO resulted in significantly declined ammonia levels in patients with normal glucose tolerance before the procedure, ammonia levels were not significantly decreased after shunt occlusion in patients with diabetes mellitus or impaired glucose tolerance before BRTO, according to 75-g oral glucose tolerance test results. Preoperative plasma glucose level is a useful predictor of clinically significant ammonia reduction resulting from occlusion of PSS in patients with cirrhosis. Even if PSS are present, control

Advanced handbook for accident analyses of German nuclear power plants; Weiterentwicklung eines Handbuches fuer Stoerfallanalysen deutscher Kernkraftwerke

Energy Technology Data Exchange (ETDEWEB)

Kerner, Alexander; Broecker, Annette; Hartung, Juergen; Mayer, Gerhard; Pallas Moner, Guim

2014-09-15

The advanced handbook of safety analyses (HSA) comprises a comprehensive electronic collection of knowledge for the compilation and conduction of safety analyses in the area of reactor, plant and containment behaviour as well as results of existing safety analyses (performed by GRS in the past) with characteristic specifications and further background information. In addition, know-how from the analysis software development and validation process is presented and relevant rules and regulations with regard to safety demonstration are provided. The HSA comprehensively covers the topic thermo-hydraulic safety analyses (except natural hazards, man-made hazards and malicious acts) for German pressurized and boiling water reactors for power and non-power operational states. In principle, the structure of the HSA-content represents the analytical approach utilized by safety analyses and applying the knowledge from safety analyses to technical support services. On the basis of a multilevel preparation of information to the topics ''compilation of safety analyses'', ''compilation of data bases'', ''assessment of safety analyses'', ''performed safety analyses'', ''rules and regulation'' and ''ATHLET-validation'' the HSA addresses users with different background, allowing them to enter the HSA at different levels. Moreover, the HSA serves as a reference book, which is designed future-oriented, freely configurable related to the content, completely integrated into the GRS internal portal and prepared to be used by a growing user group.

Multi-level analyses of spatial and temporal determinants for dengue infection

Directory of Open Access Journals (Sweden)

Oskam Linda

2006-01-01

Full Text Available Abstract Background Dengue is a mosquito-borne viral infection that is now endemic in most tropical countries. In Thailand, dengue fever/dengue hemorrhagic fever is a leading cause of hospitalization and death among children. A longitudinal study among 1750 people in two rural and one urban sites in northern Thailand from 2001 to 2003 studied spatial and temporal determinants for recent dengue infection at three levels (time, individual and household. Methods Determinants for dengue infection were measured by questionnaire, land-cover maps and GIS. IgM antibodies against dengue were detected by ELISA. Three-level multi-level analysis was used to study the risk determinants of recent dengue infection. Results Rates of recent dengue infection varied substantially in time from 4 to 30%, peaking in 2002. Determinants for recent dengue infection differed per site. Spatial clustering was observed, demonstrating variation in local infection patterns. Most of the variation in recent dengue infection was explained at the time-period level. Location of a person and the environment around the house (including irrigated fields and orchards were important determinants for recent dengue infection. Conclusion We showed the focal nature of asymptomatic dengue infections. The great variation of determinants for recent dengue infection in space and time should be taken into account when designing local dengue control programs.

Item response theory analysis of the life orientation test-revised: age and gender differential item functioning analyses.

Science.gov (United States)

Steca, Patrizia; Monzani, Dario; Greco, Andrea; Chiesi, Francesca; Primi, Caterina

2015-06-01

This study is aimed at testing the measurement properties of the Life Orientation Test-Revised (LOT-R) for the assessment of dispositional optimism by employing item response theory (IRT) analyses. The LOT-R was administered to a large sample of 2,862 Italian adults. First, confirmatory factor analyses demonstrated the theoretical conceptualization of the construct measured by the LOT-R as a single bipolar dimension. Subsequently, IRT analyses for polytomous, ordered response category data were applied to investigate the items' properties. The equivalence of the items across gender and age was assessed by analyzing differential item functioning. Discrimination and severity parameters indicated that all items were able to distinguish people with different levels of optimism and adequately covered the spectrum of the latent trait. Additionally, the LOT-R appears to be gender invariant and, with minor exceptions, age invariant. Results provided evidence that the LOT-R is a reliable and valid measure of dispositional optimism. © The Author(s) 2014.

Genetic evidence of a causal effect of insulin resistance on branched-chain amino acid levels

DEFF Research Database (Denmark)

Mahendran, Yuvaraj; Jonsson, Anna; Have, Christian T

2017-01-01

variable for insulin resistance. A GRS of three variants increasing circulating BCAA levels was used as an instrumental variable for circulating BCAA levels. RESULTS: Fasting plasma BCAA levels were associated with higher HOMA-IR in ADDITION-PRO (β 0.137 [95% CI 0.08, 0.19] p = 6 × 10(-7)). However......, the GRS for circulating BCAA levels was not associated with fasting insulin levels or HOMA-IR in ADDITION-PRO (β -0.011 [95% CI -0.053, 0.032] p = 0.6 and β -0.011 [95% CI -0.054, 0.031] p = 0.6, respectively) or in GWAS results for HOMA-IR from MAGIC (β for valine-increasing GRS -0.012 [95% CI -0.069, 0......(-4), and β 0.67 [95% CI 0.16, 1.18] p = 0.01 for isoleucine, leucine and valine levels, respectively) and instrumental variable analyses in ADDITION-PRO indicated that HOMA-IR is causally related to higher circulating fasting BCAA levels (β 0.73 [95% CI 0.26, 1.19] p = 0.002). CONCLUSIONS/INTERPRETATION: Our...

Microcomputer-controlled thermoluminescent analyser IJS MR-200

International Nuclear Information System (INIS)

Mihelic, M.; Miklavzic, U.; Rupnik, Z.; Satalic, P.; Spreizer, F.; Zerovnik, I.

1985-01-01

Performances and concept of the multipurpose, microcomputer-controlled thermoluminescent analyser, designed for use in laboratory work TL dosemeters as well as for routine dose readings in the range from ecological to accident doses is described. The main features of the analyser are: time-linear sampling, digitalisation, storing, and subsequent displaying on the monitor time scale of the glow and and temperature curve of the TL material; digital stabilization, control and diagnostic of the analog unit; ability of storing 7 different 8-parametric heating programs; ability of storing 15 evaluation programs defined by 2 or 4 parameters and 3 different algorithms (altogether 5 types of evaluations). Analyser has several features intended for routine work: 9 function keys and possibilities of file forming on cassette or display disc, of dose calculation and averaging, of printing reports with names, and possibility of additional programming in Basic. (author)

Reprocessing of spent nuclear fuel, Annex 3: Chemical and radiometric control analyses

International Nuclear Information System (INIS)

Gal, I.

1964-01-01

Simple, fast and reliable control analyses are obligatory during reprocessing. The analyses performed covered measuring the contents of uranium in water and organic solutions, contents of plutonium in water and organic solutions as well as the free acid in both solutions. In addition temporary analyses were done to determine the density of water and organic solutions as well as content of TBP in kerosine

Safety and sensitivity analyses of a generic geologic disposal system for high-level radioactive waste

International Nuclear Information System (INIS)

Kimura, Hideo; Takahashi, Tomoyuki; Shima, Shigeki; Matsuzuru, Hideo

1994-11-01

This report describes safety and sensitivity analyses of a generic geologic disposal system for HLW, using a GSRW code and an automated sensitivity analysis methodology based on the Differential Algebra. An exposure scenario considered here is based on a normal evolution scenario which excludes events attributable to probabilistic alterations in the environment. The results of sensitivity analyses indicate that parameters related to a homogeneous rock surrounding a disposal facility have higher sensitivities to the output analyzed here than those of a fractured zone and engineered barriers. The sensitivity analysis methodology provides technical information which might be bases for the optimization of design of the disposal facility. Safety analyses were performed on the reference disposal system which involve HLW in amounts corresponding to 16,000 MTU of spent fuels. The individual dose equivalent due to the exposure pathway ingesting drinking water was calculated using both the conservative and realistic values of geochemical parameters. In both cases, the committed dose equivalent evaluated here is the order of 10 -7 Sv, and thus geologic disposal of HLW may be feasible if the disposal conditions assumed here remain unchanged throughout the periods assessed here. (author)

Large-scale association analyses identify new loci influencing glycemic traits and provide insight into the underlying biological pathways

Science.gov (United States)

Scott, Robert A; Lagou, Vasiliki; Welch, Ryan P; Wheeler, Eleanor; Montasser, May E; Luan, Jian’an; Mägi, Reedik; Strawbridge, Rona J; Rehnberg, Emil; Gustafsson, Stefan; Kanoni, Stavroula; Rasmussen-Torvik, Laura J; Yengo, Loïc; Lecoeur, Cecile; Shungin, Dmitry; Sanna, Serena; Sidore, Carlo; Johnson, Paul C D; Jukema, J Wouter; Johnson, Toby; Mahajan, Anubha; Verweij, Niek; Thorleifsson, Gudmar; Hottenga, Jouke-Jan; Shah, Sonia; Smith, Albert V; Sennblad, Bengt; Gieger, Christian; Salo, Perttu; Perola, Markus; Timpson, Nicholas J; Evans, David M; Pourcain, Beate St; Wu, Ying; Andrews, Jeanette S; Hui, Jennie; Bielak, Lawrence F; Zhao, Wei; Horikoshi, Momoko; Navarro, Pau; Isaacs, Aaron; O’Connell, Jeffrey R; Stirrups, Kathleen; Vitart, Veronique; Hayward, Caroline; Esko, Tönu; Mihailov, Evelin; Fraser, Ross M; Fall, Tove; Voight, Benjamin F; Raychaudhuri, Soumya; Chen, Han; Lindgren, Cecilia M; Morris, Andrew P; Rayner, Nigel W; Robertson, Neil; Rybin, Denis; Liu, Ching-Ti; Beckmann, Jacques S; Willems, Sara M; Chines, Peter S; Jackson, Anne U; Kang, Hyun Min; Stringham, Heather M; Song, Kijoung; Tanaka, Toshiko; Peden, John F; Goel, Anuj; Hicks, Andrew A; An, Ping; Müller-Nurasyid, Martina; Franco-Cereceda, Anders; Folkersen, Lasse; Marullo, Letizia; Jansen, Hanneke; Oldehinkel, Albertine J; Bruinenberg, Marcel; Pankow, James S; North, Kari E; Forouhi, Nita G; Loos, Ruth J F; Edkins, Sarah; Varga, Tibor V; Hallmans, Göran; Oksa, Heikki; Antonella, Mulas; Nagaraja, Ramaiah; Trompet, Stella; Ford, Ian; Bakker, Stephan J L; Kong, Augustine; Kumari, Meena; Gigante, Bruna; Herder, Christian; Munroe, Patricia B; Caulfield, Mark; Antti, Jula; Mangino, Massimo; Small, Kerrin; Miljkovic, Iva; Liu, Yongmei; Atalay, Mustafa; Kiess, Wieland; James, Alan L; Rivadeneira, Fernando; Uitterlinden, Andre G; Palmer, Colin N A; Doney, Alex S F; Willemsen, Gonneke; Smit, Johannes H; Campbell, Susan; Polasek, Ozren; Bonnycastle, Lori L; Hercberg, Serge; Dimitriou, Maria; Bolton, Jennifer L; Fowkes, Gerard R; Kovacs, Peter; Lindström, Jaana; Zemunik, Tatijana; Bandinelli, Stefania; Wild, Sarah H; Basart, Hanneke V; Rathmann, Wolfgang; Grallert, Harald; Maerz, Winfried; Kleber, Marcus E; Boehm, Bernhard O; Peters, Annette; Pramstaller, Peter P; Province, Michael A; Borecki, Ingrid B; Hastie, Nicholas D; Rudan, Igor; Campbell, Harry; Watkins, Hugh; Farrall, Martin; Stumvoll, Michael; Ferrucci, Luigi; Waterworth, Dawn M; Bergman, Richard N; Collins, Francis S; Tuomilehto, Jaakko; Watanabe, Richard M; de Geus, Eco J C; Penninx, Brenda W; Hofman, Albert; Oostra, Ben A; Psaty, Bruce M; Vollenweider, Peter; Wilson, James F; Wright, Alan F; Hovingh, G Kees; Metspalu, Andres; Uusitupa, Matti; Magnusson, Patrik K E; Kyvik, Kirsten O; Kaprio, Jaakko; Price, Jackie F; Dedoussis, George V; Deloukas, Panos; Meneton, Pierre; Lind, Lars; Boehnke, Michael; Shuldiner, Alan R; van Duijn, Cornelia M; Morris, Andrew D; Toenjes, Anke; Peyser, Patricia A; Beilby, John P; Körner, Antje; Kuusisto, Johanna; Laakso, Markku; Bornstein, Stefan R; Schwarz, Peter E H; Lakka, Timo A; Rauramaa, Rainer; Adair, Linda S; Smith, George Davey; Spector, Tim D; Illig, Thomas; de Faire, Ulf; Hamsten, Anders; Gudnason, Vilmundur; Kivimaki, Mika; Hingorani, Aroon; Keinanen-Kiukaanniemi, Sirkka M; Saaristo, Timo E; Boomsma, Dorret I; Stefansson, Kari; van der Harst, Pim; Dupuis, Josée; Pedersen, Nancy L; Sattar, Naveed; Harris, Tamara B; Cucca, Francesco; Ripatti, Samuli; Salomaa, Veikko; Mohlke, Karen L; Balkau, Beverley; Froguel, Philippe; Pouta, Anneli; Jarvelin, Marjo-Riitta; Wareham, Nicholas J; Bouatia-Naji, Nabila; McCarthy, Mark I; Franks, Paul W; Meigs, James B; Teslovich, Tanya M; Florez, Jose C; Langenberg, Claudia; Ingelsson, Erik; Prokopenko, Inga; Barroso, Inês

2012-01-01

Through genome-wide association meta-analyses of up to 133,010 individuals of European ancestry without diabetes, including individuals newly genotyped using the Metabochip, we have raised the number of confirmed loci influencing glycemic traits to 53, of which 33 also increase type 2 diabetes risk (q fasting insulin showed association with lipid levels and fat distribution, suggesting impact on insulin resistance. Gene-based analyses identified further biologically plausible loci, suggesting that additional loci beyond those reaching genome-wide significance are likely to represent real associations. This conclusion is supported by an excess of directionally consistent and nominally significant signals between discovery and follow-up studies. Functional follow-up of these newly discovered loci will further improve our understanding of glycemic control. PMID:22885924

ANALYSING THE LEVEL OF CORRELATION AMONG TURKEY AND EUROPEAN UNION MARKETS

Directory of Open Access Journals (Sweden)

HAKAN SARITAŞ

2013-06-01

Full Text Available International portfolio investments are growing rapidly as a result of the relaxation of capital controls in national markets. The most attractive aspect of international portfolio investments for investors is that investors are able to decrease the volatility of their investments through diversification. Although international portfolio investments provide tremendous diversification benefits, the level of correlation among the equity markets around the world has an important impact on diversification. If cross-country correlations are small, international diversification can provide investors with an attractive risk-return profile. However, investors may not be able to diversify away much domestic risk if the cross-country correlations are large. In this study, I analyzed the correlation between the Turkish equity market and equity markets of European Union (EU countries. The aim was to figure out the effects of developments emerged in the way of Turkey’s membership to EU on the level of correlation between the Turkish equity market and EU markets. The findings of the study indicate that mentioned developments increased the level of correlation between the Turkish equity market and EU markets.

Iran, the bomb and the pursuit of security. Structured conflict analyses

International Nuclear Information System (INIS)

Bock, Andreas M.; Henneberg, Ingo

2014-01-01

This volume introduces readers to the structured conflict analysis as a tool of social science research and uses this instrument exemplarily to analyze systematically and on a broad basis the various conflicts that are associated with Iran both domestically and in foreign policy - beyond popular stereotypes such as the ''bomb''. The 13 contributions draw a complex picture of the conflicts with and in Iran and reflect the various aspects of these conflicts from different perspectives and at a high methodological and theoretical level. The nuclear program is examined, inter alia through the eyes of four major theories of International Relations. In addition, the analyses are concerned with the regional security dimension, the relationship USA-Iran, the role of national preferences, and the effect of national processes to the Iranian foreign policy.

PWR plant transient analyses using TRAC-PF1

International Nuclear Information System (INIS)

Ireland, J.R.; Boyack, B.E.

1984-01-01

This paper describes some of the pressurized water reactor (PWR) transient analyses performed at Los Alamos for the US Nuclear Regulatory Commission using the Transient Reactor Analysis Code (TRAC-PF1). Many of the transient analyses performed directly address current PWR safety issues. Included in this paper are examples of two safety issues addressed by TRAC-PF1. These examples are pressurized thermal shock (PTS) and feed-and-bleed cooling for Oconee-1. The calculations performed were plant specific in that details of both the primary and secondary sides were modeled in addition to models of the plant integrated control systems. The results of these analyses show that for these two transients, the reactor cores remained covered and cooled at all times posing no real threat to the reactor system nor to the public

L-carnitine plasma levels in dogs and cats. A diagnostic parameter?

International Nuclear Information System (INIS)

Fischer, J.

1993-04-01

The relation between levels of carnitine in plasma and lesions of organs should be demonstrated. 52 dogs and 58 cats examined in veterinary clinics for several reasons and routinely screened for blood chemistry also were analysed for free plasma carnitine by a radiocarbon method. Increased carnitine levels were observed in both species in case of heart, liver and kidney disorders. Additionally the influence of food intake on carnitine levels in dogs was studied. Postprandial changes were insignificant. Because of lack of information about carnitine levels in cats and changes with age plasma carnitine was determined in cats and kittens. The range of normal values was 8.2 to 24.2 μmol/l without any significance of age

The Philosophical Consideration about Food Additives

OpenAIRE

Baoyu Ma

2015-01-01

This study mainly analyzes the essential features of food additives technology from the angle of philosophy, explaining the essential characteristics of food additives technology. As for the attitude towards the application of food additives, it is influenced by the public's gender, age, educational level, occupation and monthly expenditure for buying non-staple food and other variables, thus, the attitude towards food additives and green food, as well as the attitude towards using artificial...

Independent and supra-additive effects of alcohol consumption, cigarette smoking, and metabolic syndrome on the elevation of serum liver enzyme levels.

Directory of Open Access Journals (Sweden)

Eun Young Park

Full Text Available We investigated the independent and combined effects of alcohol consumption, cigarette smoking and metabolic syndrome on abnormal liver function, i.e., the elevation of serum liver enzyme levels. Participants of a Korean population-based prospective cohort aged ≥30 years without liver disease, diabetes, or cardiovascular diseases were included. Information on alcohol consumption, smoking status, and metabolic syndrome, defined as per the criteria of the Adult Treatment Panel III, were applied to evaluate their impact on serum levels of aspartate aminotransferase (AST, alanine aminotransferase (ALT, and gamma-glutamyl transferase (GGT. Alcohol consumption, cigarette smoking and metabolic syndrome were the significant individual factors that elevated serum liver enzyme levels. Supra-additive effects of metabolic syndrome and either alcohol consumption or cigarette smoking were also identified. The combination of heavy drinking (≥24 g/day and metabolic syndrome conferred an effect that was higher than the sum of the two individual effects (Synergic Index (SI: AST, 2.37 [1.20-4.67]; GGT, 1.91 [1.17-3.13]. Only GGT level (odds ratio 6.04 [3.68-9.94], SI 2.33 [1.24-4.41] was significantly elevated when the effect of moderate drinking (20 pack years, 1.80 for ≥24 g/day and ≤20 pack years, 2.03 for ≥24 g/day and >20 pack years, while only the combined effect of drinking ≥24 g/day and smoking >20 pack years elevated the AST level (SI 4.55 [3.12-6.61]. The combined effect of cigarette smoking and metabolic syndrome was not supra-additive. To prevent fatty liver disease and other related diseases, a multifactorial prevention strategy that includes limited alcohol consumption, smoking cessation and rectification of adverse metabolic profiles is required.

Three WRKY transcription factors additively repress abscisic acid and gibberellin signaling in aleurone cells.

Science.gov (United States)

Zhang, Liyuan; Gu, Lingkun; Ringler, Patricia; Smith, Stanley; Rushton, Paul J; Shen, Qingxi J

2015-07-01

Members of the WRKY transcription factor superfamily are essential for the regulation of many plant pathways. Functional redundancy due to duplications of WRKY transcription factors, however, complicates genetic analysis by allowing single-mutant plants to maintain wild-type phenotypes. Our analyses indicate that three group I WRKY genes, OsWRKY24, -53, and -70, act in a partially redundant manner. All three showed characteristics of typical WRKY transcription factors: each localized to nuclei and yeast one-hybrid assays indicated that they all bind to W-boxes, including those present in their own promoters. Quantitative real time-PCR (qRT-PCR) analyses indicated that the expression levels of the three WRKY genes varied in the different tissues tested. Particle bombardment-mediated transient expression analyses indicated that all three genes repress the GA and ABA signaling in a dosage-dependent manner. Combination of all three WRKY genes showed additive antagonism of ABA and GA signaling. These results suggest that these WRKY proteins function as negative transcriptional regulators of GA and ABA signaling. However, different combinations of these WRKY genes can lead to varied strengths in suppression of their targets. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The influences of sulphur and phosphorus additions on the creep cavitation characteristics in type 304 stainless steels

International Nuclear Information System (INIS)

Jun Hwa Hong; Soo Woo Nam; Sun Pil Choi

1986-01-01

The effects of impurities on creep cavitation characteristics in type 304 stainless steels with and without additions of sulphur and/or phosphorus have been studied using four experimental heats. Over a limited range of stress at 1000 K, the change in size distribution of creep cavities and carbide precipitates, and the level of impurity segregation with the amount of addition have been investigated. It is found that phosphorus accelerates the nucleation of creep cavities, but retards the growth of them. However, sulphur had little effect on both nucleation and growth of the cavities. It has also been found that ageing prior to testing inhibits creep cavitation. The effects of impurities on cavitation are analysed and discussed from the viewpoint of the change in the segregation of impurities and the precipitation of carbides due to impurity additions. (author)

Protocol for ADDITION-PRO

DEFF Research Database (Denmark)

Johansen, Nanna Borup; Hansen, Anne-Louise Smidt; Jensen, Troels M

2012-01-01

disease and microvascular diabetic complications. We also require a better understanding of the mechanisms that underlie and drive early changes in cardiometabolic physiology. The ADDITION-PRO study was designed to address these issues among individuals at different levels of diabetes risk recruited from...... Danish primary care. METHODS/DESIGN: ADDITION-PRO is a population-based, longitudinal cohort study of individuals at high risk for diabetes. 16,136 eligible individuals were identified at high risk following participation in a stepwise screening programme in Danish general practice between 2001 and 2006....... All individuals with impaired glucose regulation at screening, those who developed diabetes following screening, and a random sub-sample of those at lower levels of diabetes risk were invited to attend a follow-up health assessment in 2009-2011 (n=4,188), of whom 2,082 (50%) attended. The health...

Possible future HERA analyses

International Nuclear Information System (INIS)

Geiser, Achim

2015-12-01

A variety of possible future analyses of HERA data in the context of the HERA data preservation programme is collected, motivated, and commented. The focus is placed on possible future analyses of the existing ep collider data and their physics scope. Comparisons to the original scope of the HERA pro- gramme are made, and cross references to topics also covered by other participants of the workshop are given. This includes topics on QCD, proton structure, diffraction, jets, hadronic final states, heavy flavours, electroweak physics, and the application of related theory and phenomenology topics like NNLO QCD calculations, low-x related models, nonperturbative QCD aspects, and electroweak radiative corrections. Synergies with other collider programmes are also addressed. In summary, the range of physics topics which can still be uniquely covered using the existing data is very broad and of considerable physics interest, often matching the interest of results from colliders currently in operation. Due to well-established data and MC sets, calibrations, and analysis procedures the manpower and expertise needed for a particular analysis is often very much smaller than that needed for an ongoing experiment. Since centrally funded manpower to carry out such analyses is not available any longer, this contribution not only targets experienced self-funded experimentalists, but also theorists and master-level students who might wish to carry out such an analysis.

YY1 binding association with sex-biased transcription revealed through X-linked transcript levels and allelic binding analyses.

Science.gov (United States)

Chen, Chih-Yu; Shi, Wenqiang; Balaton, Bradley P; Matthews, Allison M; Li, Yifeng; Arenillas, David J; Mathelier, Anthony; Itoh, Masayoshi; Kawaji, Hideya; Lassmann, Timo; Hayashizaki, Yoshihide; Carninci, Piero; Forrest, Alistair R R; Brown, Carolyn J; Wasserman, Wyeth W

2016-11-18

Sex differences in susceptibility and progression have been reported in numerous diseases. Female cells have two copies of the X chromosome with X-chromosome inactivation imparting mono-allelic gene silencing for dosage compensation. However, a subset of genes, named escapees, escape silencing and are transcribed bi-allelically resulting in sexual dimorphism. Here we conducted in silico analyses of the sexes using human datasets to gain perspectives into such regulation. We identified transcription start sites of escapees (escTSSs) based on higher transcription levels in female cells using FANTOM5 CAGE data. Significant over-representations of YY1 transcription factor binding motif and ChIP-seq peaks around escTSSs highlighted its positive association with escapees. Furthermore, YY1 occupancy is significantly biased towards the inactive X (Xi) at long non-coding RNA loci that are frequent contacts of Xi-specific superloops. Our study suggests a role for YY1 in transcriptional activity on Xi in general through sequence-specific binding, and its involvement at superloop anchors.

The Presentation of Animals in English as an Additional Language Coursebooks

Science.gov (United States)

Jacobs, George M.; Jiexin, Teh; Michael, Joyce J.

2016-01-01

Education materials can be analysed in many ways. The current study analysed EAL (English as an Additional Language) coursebooks as to the presentation of nonhuman animals in the books. The study examined 22 EAL coursebooks. The research looked at the percentage of activities that contained animals in the coursebooks, what types of animals were…

Sectorial Group for Incident Analyses (GSAI)

International Nuclear Information System (INIS)

Galles, Q.; Gamo, J. M.; Jorda, M.; Sanchez-Garrido, P.; Lopez, F.; Asensio, L.; Reig, J.

2013-01-01

In 2008, the UNESA Nuclear Energy Committee (CEN) proposed the creation of a working group formed by experts from all Spanish NPPs with the purpose of jointly analyze relevant incidents occurred in each one of the plants. This initiative was a response to a historical situation in which the exchange of information on incidents between the Spanish NPP's was below the desired level. In june 2009, UNESA's Guide CEN-29 established the performance criteria for the so called Sectorial Group for Incident Analyses (GSAI), whose activity would be coordinated by the UNESA's Group for Incident Analyses (GSAI), whose activity would be coordinated by the UNESA's Group of Operating Experience, under the Operations Commission (COP). (Author)

HLA region excluded by linkage analyses of early onset periodontitis

Energy Technology Data Exchange (ETDEWEB)

Sun, C.; Wang, S.; Lopez, N.

1994-09-01

Previous studies suggested that HLA genes may influence susceptibility to early-onset periodontitis (EOP). Segregation analyses indicate that EOP may be due to a single major gene. We conducted linkage analyses to assess possible HLA effects on EOP. Fifty families with two or more close relatives affected by EOP were ascertained in Virginia and Chile. A microsatellite polymorphism within the HLA region (at the tumor necrosis factor beta locus) was typed using PCR. Linkage analyses used a donimant model most strongly supported by previous studies. Assuming locus homogeneity, our results exclude a susceptibility gene within 10 cM on either side of our marker locus. This encompasses all of the HLA region. Analyses assuming alternative models gave qualitatively similar results. Allowing for locus heterogeneity, our data still provide no support for HLA-region involvement. However, our data do not statistically exclude (LOD <-2.0) hypotheses of disease-locus heterogeneity, including models where up to half of our families could contain an EOP disease gene located in the HLA region. This is due to the limited power of even our relatively large collection of families and the inherent difficulties of mapping genes for disorders that have complex and heterogeneous etiologies. Additional statistical analyses, recruitment of families, and typing of flanking DNA markers are planned to more conclusively address these issues with respect to the HLA region and other candidate locations in the human genome. Additional results for markers covering most of the human genome will also be presented.

Calculations for Adjusting Endogenous Biomarker Levels During Analytical Recovery Assessments for Ligand-Binding Assay Bioanalytical Method Validation.

Science.gov (United States)

Marcelletti, John F; Evans, Cindy L; Saxena, Manju; Lopez, Adriana E

2015-07-01

It is often necessary to adjust for detectable endogenous biomarker levels in spiked validation samples (VS) and in selectivity determinations during bioanalytical method validation for ligand-binding assays (LBA) with a matrix like normal human serum (NHS). Described herein are case studies of biomarker analyses using multiplex LBA which highlight the challenges associated with such adjustments when calculating percent analytical recovery (%AR). The LBA test methods were the Meso Scale Discovery V-PLEX® proinflammatory and cytokine panels with NHS as test matrix. The NHS matrix blank exhibited varied endogenous content of the 20 individual cytokines before spiking, ranging from undetectable to readily quantifiable. Addition and subtraction methods for adjusting endogenous cytokine levels in %AR calculations are both used in the bioanalytical field. The two methods were compared in %AR calculations following spiking and analysis of VS for cytokines having detectable endogenous levels in NHS. Calculations for %AR obtained by subtracting quantifiable endogenous biomarker concentrations from the respective total analytical VS values yielded reproducible and credible conclusions. The addition method, in contrast, yielded %AR conclusions that were frequently unreliable and discordant with values obtained with the subtraction adjustment method. It is shown that subtraction of assay signal attributable to matrix is a feasible alternative when endogenous biomarkers levels are below the limit of quantitation, but above the limit of detection. These analyses confirm that the subtraction method is preferable over that using addition to adjust for detectable endogenous biomarker levels when calculating %AR for biomarker LBA.

Preferred Reporting Items for Systematic Review and Meta-Analyses of individual participant data: the PRISMA-IPD Statement.

Science.gov (United States)

Stewart, Lesley A; Clarke, Mike; Rovers, Maroeska; Riley, Richard D; Simmonds, Mark; Stewart, Gavin; Tierney, Jayne F

2015-04-28

Systematic reviews and meta-analyses of individual participant data (IPD) aim to collect, check, and reanalyze individual-level data from all studies addressing a particular research question and are therefore considered a gold standard approach to evidence synthesis. They are likely to be used with increasing frequency as current initiatives to share clinical trial data gain momentum and may be particularly important in reviewing controversial therapeutic areas. To develop PRISMA-IPD as a stand-alone extension to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) Statement, tailored to the specific requirements of reporting systematic reviews and meta-analyses of IPD. Although developed primarily for reviews of randomized trials, many items will apply in other contexts, including reviews of diagnosis and prognosis. Development of PRISMA-IPD followed the EQUATOR Network framework guidance and used the existing standard PRISMA Statement as a starting point to draft additional relevant material. A web-based survey informed discussion at an international workshop that included researchers, clinicians, methodologists experienced in conducting systematic reviews and meta-analyses of IPD, and journal editors. The statement was drafted and iterative refinements were made by the project, advisory, and development groups. The PRISMA-IPD Development Group reached agreement on the PRISMA-IPD checklist and flow diagram by consensus. Compared with standard PRISMA, the PRISMA-IPD checklist includes 3 new items that address (1) methods of checking the integrity of the IPD (such as pattern of randomization, data consistency, baseline imbalance, and missing data), (2) reporting any important issues that emerge, and (3) exploring variation (such as whether certain types of individual benefit more from the intervention than others). A further additional item was created by reorganization of standard PRISMA items relating to interpreting results. Wording

Influence of molasses additive and moisture level at ensiling on ...

African Journals Online (AJOL)

Compared to day 0 (control), silage pH dropped significantly at day 7 for molasses-treated silage regardless of initial moisture level. In the untreated silage a slightly lower pH was recorded for the unwilted silage. Molasses treatment resulted in a lower silage pH, higher lactic acid and lower acetic acid concentrations starting ...

INFLUENCE OF NATURAL ADDITIVES ON PROTEIN COMPLEX OF BREAD

Directory of Open Access Journals (Sweden)

Dana Urminská

2010-11-01

Full Text Available The study focuses on researching the influence of natural additives on certain technological characteristics of mixtures used for bread production, more particularly the influence of N substances in used raw material on selected qualitative parameters of bread. The blends for bread production to be analysed were prepared by mixing wheat flour with an addition of oat, buckwheat, lentil and chickpea wholegrain flour in different portions (10, 20, 30, 40 and 50 %. The experiment showed that the addition of natural additives worsened the protein complex of the blends used in bread production (worsening also qualitative parameters known as product volume. The loaves prepared with an addition of buckwheat, oat, lentil and chickpea were evaluated to be of a lesser quality from a technological viewpoint when compared with pure wheat loaves. The lower content of gluten forming proteins and the generally changed protein composition of blends due to additives caused a lower percentage of wet gluten content, its lower extensibility and swelling capacity. The sedimentation value (Zeleny index decreased proportionally with the increase of addition until the level was unsatisfactory for raw material intended for bakery purposes. The N content in experimental loaves was higher than in the reference loaves and it increased according to the selected additive and its portion in the blend (more with the addition of lentil and chickpea, less in case of buckwheat and oat which is considered as positive from a nutritional point of view. But from the technological point of view the additives did not show any positive influence and caused a lower loaf bread volume. The most significant decrease of the loaf bread volume was found with the addition of 50 % of buckwheat (- 45.6 %. Better results were obtained with a lower portion of the additive: loaf with an addition of 30 % of chickpea (volume decreased by 12.8 % > loaf with an addition of 30 % of lentil (volume

Radiometric analyses of floodplain sediments at the Savannah River Plant

International Nuclear Information System (INIS)

Lower, M.W.

1987-09-01

A Comprehensive Cooling Water Study to assess the effects of reactor cooling water discharges and related reactor area liquid releases to onsite streams and the nearby Savannah River has been completed at the US Department of Energy's Savannah River Plant (SRP). Extensive radiometric analyses of man-made and naturally occurring gamma-emitting radionuclides were measured in floodplain sediment cores extracted from onsite surface streams at SRP and from the Savannah River. Gamma spectrometric analyses indicate that reactor operations contribute to floodplain radioactivity levels slightly higher than levels associated with global fallout. In locations historically unaffected by radioactive releases from SRP operations, Cs-137 concentrations were found at background and fallout levels of about 1 pCi/g. In onsite streams that provided a receptor for liquid radioactive releases from production reactor areas, volume-weighted Cs-137 concentrations ranged by core from background levels to 55 pCi/g. Savannah River sediments contained background and atmospheric fallout levels of Cs-137 only. 2 refs., 5 figs

Deaf college students' mathematical skills relative to morphological knowledge, reading level, and language proficiency.

Science.gov (United States)

Kelly, Ronald R; Gaustad, Martha G

2007-01-01

This study of deaf college students examined specific relationships between their mathematics performance and their assessed skills in reading, language, and English morphology. Simple regression analyses showed that deaf college students' language proficiency scores, reading grade level, and morphological knowledge regarding word segmentation and meaning were all significantly correlated with both the ACT Mathematics Subtest and National Technical Institute for the Deaf (NTID) Mathematics Placement Test scores. Multiple regression analyses identified the best combination from among these potential independent predictors of students' performance on both the ACT and NTID mathematics tests. Additionally, the participating deaf students' grades in their college mathematics courses were significantly and positively associated with their reading grade level and their knowledge of morphological components of words.

Microstructural analysis of ceramic masses with waste kaolin addition for the red ceramic production

International Nuclear Information System (INIS)

Vida, Talita Almeida; Fagury Neto, Elias; Rabelo, Adriano Alves

2010-01-01

Incorporating reject industrial ceramic mixtures has proved viable in the reduction of environmental liabilities. In this study, we sought to study the potential use of ceramic formulations with the addition of tailings from the production of kaolin clay to the region of the city of Maraba-PA. Formulations were obtained with two clays of this region with the addition of up to 60% by weight of kaolin waste. The microstructural analyses were carried out from the preparation of specimens that were sintered at 1000 and 1200 °C with level 3 hours. The samples prepared were used to observe the microstructure by optical microscope, to determine the constituents of each formulation after burning. And later analysis was performed X-rays diffraction, to quantify the phases present. It was observed that increasing the content of the mixture of kaolin clay caused the reaction of kaolinite forming the primary mullite from 1000 ° C. For a firing temperature around 1200 ° C showed the presence of mullite even the addition of 20% kaolin, noting also the presence of secondary kaolinite. (author)

Uncertainty and sensitivity analyses for age-dependent unavailability model integrating test and maintenance

International Nuclear Information System (INIS)

Kančev, Duško; Čepin, Marko

2012-01-01

component ageing data set influences the performed unavailability calculations on system level, as well as they present sensitivity insights on the equipment. Sensitivity analyses were additionally conducted. The obtained results indicate sensitivity insights associated to the coded Monte Carlo simulation itself as well as component ageing effects sensitivity judgements related to the selected system unavailability calculation.

Romanian Consumers’ Willingness to Buy Foodstuffs Containing Food Additives: Results of a Conjoint Study

Directory of Open Access Journals (Sweden)

Viktória Szucs

2015-11-01

Full Text Available Results of the literature and the authors’ previous studies showed consumers’ high anxiety regarding food additives as well as their high demand for additive-free products in Romania, even at higher prices. Hence, the aim of our work was to analyse the willingness to buy and preference of foodstuffs containing natural and artificial food additives in Romania.A complex conjoint analysis (rating-based and choice-based was performed amongst Romanian consumers. Conjoint cards were created from two groups of food additives (‘preservatives’ and ‘packaging gases’, and consisting of two ‘model foodstuffs’ (pre-packed sliced cheese and chips. For the study, three factors were selected: ‘preservatives’ (artificial/natural, ‘packaging gases’ (contains/does not contain and ‘price’ (average+10%/average+20%. Results were collected via the internet and data were analysed with the help of SPSS Conjoint and XLSTAT softwares. ‘Preservatives’ have a dominant importance and ‘natural preservatives’ have a high utility in shopping decisions. ‘Natural’ compounds have higher importance in the example of foodstuffs thought to contain less food additives (pre-packed sliced cheese, while the presence of ‘packaging gases’ is acceptable to respondents in easy to handle and convenient foodstuffs. With the help of the cluster analysis, the promising target group (‘desire for natural’ characterising additive-free foodstuffs  that contain natural compounds was identified. Restricted comparison of the rating-based and the choice-based analysis showed that the choice-based method was easier to handle and understand for the participants. Regarding the results, a threefold conclusion was established: the ‘prominence effect’ is greater for the choice-based than the rating-based analysis; the effect of ‘level focusing’ is smaller in the rating-based than in the choice-based analysis; the ‘compatibility effect’ the rating

Analyses of containment structures with corrosion damage

International Nuclear Information System (INIS)

Cherry, J.L.

1997-01-01

Corrosion damage that has been found in a number of nuclear power plant containment structures can degrade the pressure capacity of the vessel. This has prompted concerns regarding the capacity of corroded containments to withstand accident loadings. To address these concerns, finite element analyses have been performed for a typical PWR Ice Condenser containment structure. Using ABAQUS, the pressure capacity was calculated for a typical vessel with no corrosion damage. Multiple analyses were then performed with the location of the corrosion and the amount of corrosion varied in each analysis. Using a strain-based failure criterion, a open-quotes lower boundclose quotes, open-quotes best estimateclose quotes, and open-quotes upper boundclose quotes failure level was predicted for each case. These limits were established by: determining the amount of variability that exists in material properties of typical containments, estimating the amount of uncertainty associated with the level of modeling detail and modeling assumptions, and estimating the effect of corrosion on the material properties

Fuel additive improves plant`s air quality

Energy Technology Data Exchange (ETDEWEB)

Kratch, K.

1995-07-01

Employees of a major pulp and paper manufacturer complained to the Michigan Department of Public Health that emissions from liquefied petroleum gas-powered fork-lifts used in one of the facility`s warehouses were making them ill. The new and tight building was locking in carbon monoxide emissions, according to the plant`s vehicle maintenance supervisor. Although LPG is a clean-burning fuel, it absorbs impurities from pipelines, resulting in emissions problems. After the company introduced a fuel additive to the LPG, employees` symptoms disappeared. According to the maintenance supervisor, there have been no complaints since the additive was introduced five years ago. A major US auto manufacturer also found the additive helpful in reducing carbon monoxide emissions from forklift trucks in a large parts warehouse to levels within OSHA limits. The carmaker conducted a test of 10 forklifts at its Toledo, Ohio, plant to determine the additive`s effectiveness. Trucks were equipped with new or rebuilt vaporizers, and their carburetors were adjusted for the lowest carbon monoxide and hydrocarbon emissions levels prior to the test. According to Advanced Technology, five trucks were filled with LPG and treated with CGX-4, and five used fuel from the same stock but without the additive. All were operated 16 hours a day, six days a week without further tuning or adjusting. Carbon monoxide and hydrocarbon emissions were measured at 30-, 45- and 65-day intervals. Test results show that all of the trucks using the additive maintained low levels of carbon monoxide and hydrocarbon emissions longer than trucks not using the additive.

Litter mixture interactions at the level of plant functional types are additive.

NARCIS (Netherlands)

Hoorens, B.; Stroetenga, M.J.; Aerts, R.

2010-01-01

It is very difficult to estimate litter decomposition rates in natural ecosystems because litters of many species are mixed and idiosyncratic interactions occur among those litters. A way to tackle this problem is to investigate litter mixing effects not at the species level but at the level of

Organic farming at the farm level

DEFF Research Database (Denmark)

Jacobsen, Brian H.; Madsen, Niels; Ørum, Jens Erik

as part of a larger project entitled “Economic analyses of the future development of organic farming – effects at the field, farm, sector and macroeconomic level”. The project links effects at the field-level with analyses at the farm level. These effects are then used in sector and macroeconomic analyses......, which are described in other reports from Food and Resource Economic Institute (Jacobsen, 2005 and Andersen et al., 2005). This gives coherent results from the field to the macroeconomic level regarding changes in technology and legislation.......The purpose of this report is to present possible impacts of new technology and changes in legislation on the profitability of different types of organic farms. The aim is also to look at both the current and future trends in the organic area in Denmark. The farm level analyses are carried out...

Development of uncertainty analyses for the transport of radionuclides from a repository for high-level radioactive waste. Stage one

International Nuclear Information System (INIS)

Sundstroem, B.

1986-10-01

The escape of radionuclides from a repository for high level waste is described by the near field model LCHCAL and the geosphere models GEO1/SU and NUCDIF. These models are used to calculate the radionuclide outflow to the biosphere. The uncertainties in the input parameters to the near field and geosphere models are handled by the uncertainty analysis models PARVAR and SYVAC/SU. The uncertainty analysis models have been tested on two nuclides, 14 C and 135 Cs, for cases with pure surface sorption and matrix diffusion. In the case of surface sorption five input parameters and for matrix diffusion six input parameters were varied. The results of the uncertainty analyses are presented in the form of histograms, scatter plots, isocontour plots and 3-dimensional plots of the radionuclide release to the biosphere. Also the ten highest maximum release rates and correlation coefficients are presented. (orig.)

Performance and Vibration Analyses of Lift-Offset Helicopters

Directory of Open Access Journals (Sweden)

Jeong-In Go

2017-01-01

Full Text Available A validation study on the performance and vibration analyses of the XH-59A compound helicopter is conducted to establish techniques for the comprehensive analysis of lift-offset compound helicopters. This study considers the XH-59A lift-offset compound helicopter using a rigid coaxial rotor system as a verification model. CAMRAD II (Comprehensive Analytical Method of Rotorcraft Aerodynamics and Dynamics II, a comprehensive analysis code, is used as a tool for the performance, vibration, and loads analyses. A general free wake model, which is a more sophisticated wake model than other wake models, is used to obtain good results for the comprehensive analysis. Performance analyses of the XH-59A helicopter with and without auxiliary propulsion are conducted in various flight conditions. In addition, vibration analyses of the XH-59A compound helicopter configuration are conducted in the forward flight condition. The present comprehensive analysis results are in good agreement with the flight test and previous analyses. Therefore, techniques for the comprehensive analysis of lift-offset compound helicopters are appropriately established. Furthermore, the rotor lifts are calculated for the XH-59A lift-offset compound helicopter in the forward flight condition to investigate the airloads characteristics of the ABC™ (Advancing Blade Concept rotor.

Analysing the effectiveness of renewable energy supporting policies in the European Union

Energy Technology Data Exchange (ETDEWEB)

Harmelink, Mirjam [Ecofys BV, P.O. Box 8404, NL-3503 RK Utrecht (Netherlands)] e-mail: m.harmelink@ecofys.nl; Voogt, Monique [Ecofys BV, P.O. Box 8404, NL-3503 RK Utrecht (Netherlands); Cremer, Clemens [Fraunhofer ISI, Breslauer Str. 48, 76139 Karlsruhe (Germany)] e-mail: Cremer@isi.fhg.de

2006-02-01

With several mid-term policies in place to support the development of renewables, the European Union (EU) seems on its way to increasing the share of renewable energy to the targeted 12% by the year 2010. It is however, yet unclear how effective these policies are, which technologies will see the largest growth and which countries will indeed be able to meet their targets. This article discusses a monitoring protocol that was developed to monitor this effectiveness and judge whether targets will be met. In a step-wise approach policy instruments are characterised and analysed, leading to a quantitative assessment of the likely growth in renewable energy production for each individual technology and country in case no policy changes occur. Applying this monitoring protocol at the EU-level we show that with the current policies in place renewable energy production will reach a share of 8-10% in 2010, and the share of electricity production will reach a level of 15-18% of total electricity consumption, whereas the target is 22.5%. Additional policies are clearly needed to achieve the ambitious targets set.

Analysing the effectiveness of renewable energy supporting policies in the European Union

International Nuclear Information System (INIS)

Harmelink, Mirjam; Voogt, Monique; Cremer, Clemens

2006-01-01

With several mid-term policies in place to support the development of renewables, the European Union (EU) seems on its way to increasing the share of renewable energy to the targeted 12% by the year 2010. It is however, yet unclear how effective these policies are, which technologies will see the largest growth and which countries will indeed be able to meet their targets. This article discusses a monitoring protocol that was developed to monitor this effectiveness and judge whether targets will be met. In a step-wise approach policy instruments are characterised and analysed, leading to a quantitative assessment of the likely growth in renewable energy production for each individual technology and country in case no policy changes occur. Applying this monitoring protocol at the EU-level we show that with the current policies in place renewable energy production will reach a share of 8-10% in 2010, and the share of electricity production will reach a level of 15-18% of total electricity consumption, whereas the target is 22.5%. Additional policies are clearly needed to achieve the ambitious targets set

Identification of Two Additional Susceptibility Loci for Inflammatory Bowel Disease in a Chinese Population

Directory of Open Access Journals (Sweden)

Xiucai Lan

2017-04-01

Full Text Available Background/Aims: To investigate the associations between the rs1250569 (zinc finger MIZ-type containing 1, ZMIZ1, rs1042522 (tumour protein p53, TP53, and rs10114470 (tumour necrosis factor-like cytokine 1A, TL1A polymorphisms and the development of inflammatory bowel disease (IBD in a Chinese (Han population. We analysed the expression of genes that predispose patients to Crohn’s disease (CD and ulcerative colitis (UC. Methods: A total of 381 IBD patients and 517 healthy controls were recruited into our study. Polymorphisms at the three loci were genotyped using polymerase chain reaction-ligation detection reactions (PCR-LDR. Genotype-phenotype correlations were analysed. Blood and gut samples were obtained and analysed using quantitative real-time PCR (qRT-PCR, western blot analysis, and immunohistochemistry to investigate the mRNA and protein levels and in situ expression of genes found to predispose patients to IBD. Furthermore, the expression of susceptible genes was further verified using a mouse dextran sulphate sodium (DSS-induced acute colitis model. Results: No significant association was detected between rs1250569 and rs1042522 genotypes and CD or UC susceptibility. However, the frequency of allele A of rs1250569 was much higher in CD patients than that in healthy controls (55.03% vs. 48.48%, respectively; p = 0.044. The mutation rates at rs10114470 were dramatically lower at both the genotype and allele level in patients than those in healthy controls (p = 0.002 at both the genotype and allele level. Additionally, increased ZMIZ1 and TL1A levels were detected in intestinal samples obtained from both IBD patients and DSS-treated mice. Conclusion: rs1250569 (ZMIZ1 and rs10114470 (TL1A are two novel loci that indicate susceptibility to IBD in Han-Chinese patients. Consistent with previous studies, TL1A expression levels were higher in Chinese Han IBD patients and DSS-treated mice. Most importantly, we found that ZMIZ1 expression was

Utilizing random forests imputation of forest plot data for landscape-level wildfire analyses

Science.gov (United States)

Karin L. Riley; Isaac C. Grenfell; Mark A. Finney; Nicholas L. Crookston

2014-01-01

Maps of the number, size, and species of trees in forests across the United States are desirable for a number of applications. For landscape-level fire and forest simulations that use the Forest Vegetation Simulator (FVS), a spatial tree-level dataset, or “tree list”, is a necessity. FVS is widely used at the stand level for simulating fire effects on tree mortality,...

Graphite analyser upgrade for the IRIS spectrometer at ISIS

International Nuclear Information System (INIS)

Campbell, S.I.; Telling, M.T.F.; Carlile, C.J.

1999-01-01

Complete text of publication follows. The pyrolytic graphite (PG) analyser bank on the IRIS high resolution inelastic spectrometer [1] at ISIS is to be upgraded. At present the analyser consists of 1350 graphite pieces (6 rows by 225 columns) cooled to 25K [2]. The new analyser array, however, will provide a three-fold increase in area and employ 4212 crystal pieces (18 rows by 234 columns). In addition, the graphite crystals will be cooled close to liquid helium temperature to further reduce thermal diffuse scattering (TDS) and improve the sensitivity of the spectrometer [2]. For an instrument such as IRIS, with its analyser in near back-scattering geometry, optical aberration and variation in the time-of-flight of the analysed neutrons is introduced as one moves out from the horizontal scattering plane. To minimise such effects, the profile of the analyser array has been redesigned. The concept behind the design of the new analyser bank and factors that effect the overall resolution of the instrument are discussed. Results of Monte Carlo simulations of the expected resolution and intensity of the complete instrument are presented and compared to the current instrument performance. (author) [1] C.J. Carlile et al, Physica B 182 (1992) 431-440.; [2] C.J. Carlile et al, Nuclear Instruments and Methods In Physics Research A 338 (1994) 78-82

Additive enhancement of wound healing in diabetic mice by low level light and topical CoQ10

Science.gov (United States)

Mao, Zhigang; Wu, Jeffrey H.; Dong, Tingting; Wu, Mei X.

2016-02-01

Diabetes, a highly prevalent disease that affects 9.3% of Americans, often leads to severe complications and slow wound healing. Preclinical studies have suggested that low level light therapy (LLLT) can accelerate wound healing in diabetic subjects, but significant improvements must be made to overcome the absence of persuasive evidence for its clinical use. We demonstrate here that LLLT can be combined with topical Coenzyme Q10 (CoQ10) to heal wounds in diabetic mice significantly faster than LLLT alone, CoQ10 alone, or controls. LLLT followed by topical CoQ10 enhanced wound healing by 68~103% in diabetic mice in the first week and more than 24% in the second week compared with untreated controls. All wounds were fully healed in two weeks following the dual treatment, in contrast to only 50% wounds or a fewer being fully healed for single or sham treatment. The accelerated healing was corroborated by at least 50% higher hydroxyproline levels, and tripling cell proliferation rates in LLLT and CoQ10 treated wounds over controls. The beneficial effects on wound healing were probably attributed to additive enhancement of ATP production by LLLT and CoQ10 treatment. The combination of LLLT and topical CoQ10 is safe and convenient, and merits further clinical study.

Additive enhancement of wound healing in diabetic mice by low level light and topical CoQ10.

Science.gov (United States)

Mao, Zhigang; Wu, Jeffrey H; Dong, Tingting; Wu, Mei X

2016-02-02

Diabetes, a highly prevalent disease that affects 9.3% of Americans, often leads to severe complications and slow wound healing. Preclinical studies have suggested that low level light therapy (LLLT) can accelerate wound healing in diabetic subjects, but significant improvements must be made to overcome the absence of persuasive evidence for its clinical use. We demonstrate here that LLLT can be combined with topical Coenzyme Q10 (CoQ10) to heal wounds in diabetic mice significantly faster than LLLT alone, CoQ10 alone, or controls. LLLT followed by topical CoQ10 enhanced wound healing by 68~103% in diabetic mice in the first week and more than 24% in the second week compared with untreated controls. All wounds were fully healed in two weeks following the dual treatment, in contrast to only 50% wounds or a fewer being fully healed for single or sham treatment. The accelerated healing was corroborated by at least 50% higher hydroxyproline levels, and tripling cell proliferation rates in LLLT and CoQ10 treated wounds over controls. The beneficial effects on wound healing were probably attributed to additive enhancement of ATP production by LLLT and CoQ10 treatment. The combination of LLLT and topical CoQ10 is safe and convenient, and merits further clinical study.

Systematic comparative and sensitivity analyses of additive and outranking techniques for supporting impact significance assessments

International Nuclear Information System (INIS)

Cloquell-Ballester, Vicente-Agustin; Monterde-Diaz, Rafael; Cloquell-Ballester, Victor-Andres; Santamarina-Siurana, Maria-Cristina

2007-01-01

Assessing the significance of environmental impacts is one of the most important and all together difficult processes of Environmental Impact Assessment. This is largely due to the multicriteria nature of the problem. To date, decision techniques used in the process suffer from two drawbacks, namely the problem of compensation and the problem of identification of the 'exact boundary' between sub-ranges. This article discusses these issues and proposes a methodology for determining the significance of environmental impacts based on comparative and sensitivity analyses using the Electre TRI technique. An application of the methodology for the environmental assessment of a Power Plant project within the Valencian Region (Spain) is presented, and its performance evaluated. It is concluded that contrary to other techniques, Electre TRI automatically identifies those cases where allocation of significance categories is most difficult and, when combined with sensitivity analysis, offers greatest robustness in the face of variation in weights of the significance attributes. Likewise, this research demonstrates the efficacy of systematic comparison between Electre TRI and sum-based techniques, in the solution of assignment problems. The proposed methodology can therefore be regarded as a successful aid to the decision-maker, who will ultimately take the final decision

DNA-energetics-based analyses suggest additional genes in ...

Indian Academy of Sciences (India)

2012-06-25

Jun 25, 2012 ... sequence with its homologs in the annotated databases using alignment ... in predictions and on the development of next-generation prediction servers ... sequences, but were not annotated in the organism studied. ...... Biopolymers 52 29–56 .... improvement for identifying translation initiation sites in micro-.

Summary of Fast Pyrolysis and Upgrading GHG Analyses

Energy Technology Data Exchange (ETDEWEB)

Snowden-Swan, Lesley J.; Male, Jonathan L.

2012-12-07

The Energy Independence and Security Act (EISA) of 2007 established new renewable fuel categories and eligibility requirements (EPA 2010). A significant aspect of the National Renewable Fuel Standard 2 (RFS2) program is the requirement that the life cycle greenhouse gas (GHG) emissions of a qualifying renewable fuel be less than the life cycle GHG emissions of the 2005 baseline average gasoline or diesel fuel that it replaces. Four levels of reduction are required for the four renewable fuel standards. Table 1 lists these life cycle performance improvement thresholds. Table 1. Life Cycle GHG Thresholds Specified in EISA Fuel Type Percent Reduction from 2005 Baseline Renewable fuel 20% Advanced biofuel 50% Biomass-based diesel 50% Cellulosic biofuel 60% Notably, there is a specialized subset of advanced biofuels that are the cellulosic biofuels. The cellulosic biofuels are incentivized by the Cellulosic Biofuel Producer Tax Credit (26 USC 40) to stimulate market adoption of these fuels. EISA defines a cellulosic biofuel as follows (42 USC 7545(o)(1)(E)): The term “cellulosic biofuel” means renewable fuel derived from any cellulose, hemicellulose, or lignin that is derived from renewable biomass and that has lifecycle greenhouse gas emissions, as determined by the Administrator, that are at least 60 percent less than the baseline lifecycle greenhouse gas emissions. As indicated, the Environmental Protection Agency (EPA) has sole responsibility for conducting the life cycle analysis (LCA) and making the final determination of whether a given fuel qualifies under these biofuel definitions. However, there appears to be a need within the LCA community to discuss and eventually reach consensus on discerning a 50–59 % GHG reduction from a ≥ 60% GHG reduction for policy, market, and technology development. The level of specificity and agreement will require additional development of capabilities and time for the sustainability and analysis community, as illustrated

Self-assembled two-dimensional gold nanoparticle film for sensitive nontargeted analysis of food additives with surface-enhanced Raman spectroscopy.

Science.gov (United States)

Wu, Yiping; Yu, Wenfang; Yang, Benhong; Li, Pan

2018-05-15

The use of different food additives and their active metabolites has been found to cause serious problems to human health. Thus, considering the potential effects on human health, developing a sensitive and credible analytical method for different foods is important. Herein, the application of solvent-driven self-assembled Au nanoparticles (Au NPs) for the rapid and sensitive detection of food additives in different commercial products is reported. The assembled substrates are highly sensitive and exhibit excellent uniformity and reproducibility because of uniformly distributed and high-density hot spots. The sensitive analyses of ciprofloxacin (CF), diethylhexyl phthalate (DEHP), tartrazine and azodicarbonamide at the 0.1 ppm level using this surface-enhanced Raman spectroscopy (SERS) substrate are given, and the results show that Au NP arrays can serve as efficient SERS substrates for the detection of food additives. More importantly, SERS spectra of several commercial liquors and sweet drinks are obtained to evaluate the addition of illegal additives. This SERS active platform can be used as an effective strategy in the detection of prohibited additives in food.

Potential effects of climate change on the water level, flora and macro-fauna of a large neotropical wetland.

Science.gov (United States)

Úbeda, Bárbara; Di Giacomo, Adrian S; Neiff, Juan José; Loiselle, Steven A; Poi, Alicia S Guadalupe; Gálvez, José Ángel; Casco, Silvina; Cózar, Andrés

2013-01-01

Possible consequences of climate change in one of the world's largest wetlands (Ibera, Argentina) were analysed using a multi-scale approach. Climate projections coupled to hydrological models were used to analyse variability in wetland water level throughout the current century. Two potential scenarios of greenhouse gas emissions were explored, both resulting in an increase in the inter-annual fluctuations of the water level. In the scenario with higher emissions, projections also showed a long-term negative trend in water-level. To explore the possible response of biota to such water-level changes, species-area relationships of flora and aerial censuses of macro-fauna were analysed during an extraordinary dry period. Plant species richness at the basin scale was found to be highly resistant to hydrological changes, as the large dimension of the wetland acts to buffer against the water-level variations. However, local diversity decreased significantly with low water levels, leading to the loss of ecosystem resilience to additional stressors. The analysis of macro-fauna populations suggested that wetland provides refuge, in low water periods, for the animals with high dispersal ability (aquatic and migratory birds). On the contrary, the abundance of animals with low dispersal ability (mainly herbivorous species) was negatively impacted in low water periods, probably because they are required to search for alternative resources beyond the wetland borders. This period of resource scarcity was also related to increased mortality of large mammals (e.g. marsh deer) around water bodies with high anthropogenic enrichment and cyanobacteria dominance. The synergy between recurrent climatic fluctuations and additional stressors (i.e. biological invasions, eutrophication) presents an important challenge to the conservation of neotropical wetlands in the coming decades.

Human Factors Risk Analyses of a Doffing Protocol for Ebola-Level Personal Protective Equipment: Mapping Errors to Contamination.

Science.gov (United States)

Mumma, Joel M; Durso, Francis T; Ferguson, Ashley N; Gipson, Christina L; Casanova, Lisa; Erukunuakpor, Kimberly; Kraft, Colleen S; Walsh, Victoria L; Zimring, Craig; DuBose, Jennifer; Jacob, Jesse T

2018-03-05

Doffing protocols for personal protective equipment (PPE) are critical for keeping healthcare workers (HCWs) safe during care of patients with Ebola virus disease. We assessed the relationship between errors and self-contamination during doffing. Eleven HCWs experienced with doffing Ebola-level PPE participated in simulations in which HCWs donned PPE marked with surrogate viruses (ɸ6 and MS2), completed a clinical task, and were assessed for contamination after doffing. Simulations were video recorded, and a failure modes and effects analysis and fault tree analyses were performed to identify errors during doffing, quantify their risk (risk index), and predict contamination data. Fifty-one types of errors were identified, many having the potential to spread contamination. Hand hygiene and removing the powered air purifying respirator (PAPR) hood had the highest total risk indexes (111 and 70, respectively) and number of types of errors (9 and 13, respectively). ɸ6 was detected on 10% of scrubs and the fault tree predicted a 10.4% contamination rate, likely occurring when the PAPR hood inadvertently contacted scrubs during removal. MS2 was detected on 10% of hands, 20% of scrubs, and 70% of inner gloves and the predicted rates were 7.3%, 19.4%, 73.4%, respectively. Fault trees for MS2 and ɸ6 contamination suggested similar pathways. Ebola-level PPE can both protect and put HCWs at risk for self-contamination throughout the doffing process, even among experienced HCWs doffing with a trained observer. Human factors methodologies can identify error-prone steps, delineate the relationship between errors and self-contamination, and suggest remediation strategies.

Neuronal network analyses: premises, promises and uncertainties

OpenAIRE

Parker, David

2010-01-01

Neuronal networks assemble the cellular components needed for sensory, motor and cognitive functions. Any rational intervention in the nervous system will thus require an understanding of network function. Obtaining this understanding is widely considered to be one of the major tasks facing neuroscience today. Network analyses have been performed for some years in relatively simple systems. In addition to the direct insights these systems have provided, they also illustrate some of the diffic...

"Analysing Genre: Language Use in Professional Settings." A Review.

Science.gov (United States)

Drury, Helen

1995-01-01

"Analysing Genre," by Vijay K. Bhatia, is a timely addition to the literature on genre analysis in English for specific purposes. It is divided into three parts: the first provides theoretical background; the second explains how genre analysis works in different academic and professional settings; and the third exemplifies the…

Mild performic acid oxidation enhances chromatographic and top down mass spectrometric analyses of histones.

Science.gov (United States)

Pesavento, James J; Garcia, Benjamin A; Streeky, James A; Kelleher, Neil L; Mizzen, Craig A

2007-09-01

Recent developments in top down mass spectrometry have enabled closely related histone variants and their modified forms to be identified and quantitated with unprecedented precision, facilitating efforts to better understand how histones contribute to the epigenetic regulation of gene transcription and other nuclear processes. It is therefore crucial that intact MS profiles accurately reflect the levels of variants and modified forms present in a given cell type or cell state for the full benefit of such efforts to be realized. Here we show that partial oxidation of Met and Cys residues in histone samples prepared by conventional methods, together with oxidation that can accrue during storage or during chip-based automated nanoflow electrospray ionization, confounds MS analysis by altering the intact MS profile as well as hindering posttranslational modification localization after MS/MS. We also describe an optimized performic acid oxidation procedure that circumvents these problems without catalyzing additional oxidations or altering the levels of posttranslational modifications common in histones. MS and MS/MS of HeLa cell core histones confirmed that Met and Cys were the only residues oxidized and that complete oxidation restored true intact abundance ratios and significantly enhanced MS/MS data quality. This allowed for the unequivocal detection, at the intact molecule level, of novel combinatorially modified forms of H4 that would have been missed otherwise. Oxidation also enhanced the separation of human core histones by reverse phase chromatography and decreased the levels of salt-adducted forms observed in ESI-FTMS. This method represents a simple and easily automated means for enhancing the accuracy and sensitivity of top down analyses of combinatorially modified forms of histones that may also be of benefit for top down or bottom up analyses of other proteins.

Recovery of a wild fish population from whole-lake additions of a synthetic estrogen.

Science.gov (United States)

Blanchfield, Paul J; Kidd, Karen A; Docker, Margaret F; Palace, Vince P; Park, Brad J; Postma, Lianne D

2015-03-03

Despite widespread recognition that municipal wastewaters contain natural and synthetic estrogens, which interfere with development and reproduction of fishes in freshwaters worldwide, there are limited data on the extent to which natural populations of fish can recover from exposure to these compounds. We conducted whole-lake additions of an active component of the birth control pill (17α-ethynylestradiol; EE2) that resulted in the collapse of the fathead minnow (Pimephales promelas) population. Here we quantify physiological, population, and genetic characteristics of this population over the 7 years after EE2 additions stopped to determine if complete recovery was possible. By 3 years post-treatment, whole-body vitellogenin concentrations in male fathead minnow had returned to baseline, and testicular abnormalities were absent. In the spring of the fourth year, adult size-frequency distribution and abundance had returned to pretreatment levels. Microsatellite analyses clearly showed that postrecovery fish were descendants of the original EE2-treated population. Results from this whole-lake experiment demonstrate that fish can recover from EE2 exposure at the biochemical through population levels, although the timelines to do so are long for multigenerational exposures. These results suggest that wastewater treatment facilities that reduce discharges of estrogens and their mimics can improve the health of resident fish populations in their receiving environments.

The phaco machine: analysing new technology.

Science.gov (United States)

Fishkind, William J

2013-01-01

The phaco machine is frequently overlooked as the crucial surgical instrument it is. Understanding how to set parameters is initiated by understanding fundamental concepts of machine function. This study analyses the critical concepts of partial occlusion phaco, occlusion phaco and pump technology. In addition, phaco energy categories as well as variations of phaco energy production are explored. Contemporary power modulations and pump controls allow for the enhancement of partial occlusion phacoemulsification. These significant changes in the anterior chamber dynamics produce a balanced environment for phaco; less complications; and improved patient outcomes.

Additive Manufacturing Cloud via Peer-Robot Collaboration

Directory of Open Access Journals (Sweden)

Yuan Yao

2016-05-01

Full Text Available When building a 3D printing cloud manufacturing platform, self-sensing and collaboration on manufacturing resources present challenging problems. This paper proposes a peer-robot collaboration framework to deal with these issues. Each robot combines heterogeneous additive manufacturing hardware and software, acting as an intelligent agent. Through collaboration with other robots, it forms a dynamic and scalable integration manufacturing system. The entire distributed system is managed by rules that employ an internal rule engine, which supports rule conversion and conflict resolution. Two additive manufacturing service scenarios are designed to analyse the efficiency and scalability of the framework. Experiments show that the presented method performs well in tasks requiring large-scale access to resources and collaboration.

Willingness to Pay Additional Water Rate and Irrigation Knowledge of Farmers in Dinar Karakuyu Irrigation Areas in Turkey

Directory of Open Access Journals (Sweden)

Mevlüt Gül

2017-08-01

Full Text Available Water which has become commodity product which is an important product today. Turkey is not a water rich country. In this study, agricultural enterprises in the field of Irrigation Project in Dinar Karakuyu which was implemented in 1992 by DSI. The study analysed which factors affect the willingness to pay additional irrigation water rate with the help of logit model and the irrigation knowledge of farmers was determined by Likert scale. Dinar Karakuyu irrigation network has begun to lose the function in the region. It was supposed 100% irrigation rate but decreased by approximately 9% today. In this context, DSI (General Directorate of State Hydraulic Works plans to rehabilitation work in the same area. The main material of this study was data obtained from 67 agricultural enterprises through a survey covered by the Irrigation Rehabilitation Project in the province of Afyonkarahisar Karakuyu Dinar. The data was gathered with the help of questionnaires which were answered by farmers in Karakuyu Dinar region. The results indicated that 74.6% of farmers were willingness to pay additional water charge. The data were statistically analysed with the use of the logit model. The model results show that agricultural income, farmers’ educational level, computer ownership, attendance of agricultural training activities, family size and agricultural experience were positive factors affect farmers’ willingness to pay additional water fee.

GSHR, a Web-Based Platform Provides Gene Set-Level Analyses of Hormone Responses in Arabidopsis

Directory of Open Access Journals (Sweden)

Xiaojuan Ran

2018-01-01

Full Text Available Phytohormones regulate diverse aspects of plant growth and environmental responses. Recent high-throughput technologies have promoted a more comprehensive profiling of genes regulated by different hormones. However, these omics data generally result in large gene lists that make it challenging to interpret the data and extract insights into biological significance. With the rapid accumulation of theses large-scale experiments, especially the transcriptomic data available in public databases, a means of using this information to explore the transcriptional networks is needed. Different platforms have different architectures and designs, and even similar studies using the same platform may obtain data with large variances because of the highly dynamic and flexible effects of plant hormones; this makes it difficult to make comparisons across different studies and platforms. Here, we present a web server providing gene set-level analyses of Arabidopsis thaliana hormone responses. GSHR collected 333 RNA-seq and 1,205 microarray datasets from the Gene Expression Omnibus, characterizing transcriptomic changes in Arabidopsis in response to phytohormones including abscisic acid, auxin, brassinosteroids, cytokinins, ethylene, gibberellins, jasmonic acid, salicylic acid, and strigolactones. These data were further processed and organized into 1,368 gene sets regulated by different hormones or hormone-related factors. By comparing input gene lists to these gene sets, GSHR helped to identify gene sets from the input gene list regulated by different phytohormones or related factors. Together, GSHR links prior information regarding transcriptomic changes induced by hormones and related factors to newly generated data and facilities cross-study and cross-platform comparisons; this helps facilitate the mining of biologically significant information from large-scale datasets. The GSHR is freely available at http://bioinfo.sibs.ac.cn/GSHR/.

Integration of remote sensing and geochemical data in the mineral evaluation of the Yucca Mountain Addition, Nevada

International Nuclear Information System (INIS)

Feldman, S.C.; Castor, S.B.; Tingley, J.V.

1996-01-01

In 1989 the U.S. Department of Energy filed an application with the U.S. Bureau of Land Management for an administrative land withdrawal of about 4,300 acres bordering the western edge of the Nevada Test Site (NTS) and the southern edge of the Nellis Air Force Range. This area, which is referred to as the Yucca Mountain Addition, includes approximately 400 acres that are being considered as part of a potential repository for high-level nuclear waste at Yucca Mountain. A study of the geology and mineral deposits is required for a land withdrawal request under federal law. The Yucca Mountain Addition mineral evaluation was accomplished in late 1989 by field examination, sample collection, geochemical analysis, the analysis of satellite remote sensing data, and the collection of rock spectra in the field. Data from the Yucca Mountain Addition and from mining districts in the area were collected and analyzed, and the two data sets were then compared. The evaluation was limited to surficial data both at the Yucca Mountain Addition and in the mining districts. Evidence from both geochemical and remote sensing analyses indicate that the potential for mineral deposits is low in the Yucca Mountain Addition

Fuel and Additive Characterization for HCCI Combustion

International Nuclear Information System (INIS)

Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

2003-01-01

This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included

Procedures for the external event core damage frequency analyses for NUREG-1150

International Nuclear Information System (INIS)

Bohn, M.P.; Lambright, J.A.

1990-11-01

This report presents methods which can be used to perform the assessment of risk due to external events at nuclear power plants. These methods were used to perform the external events risk assessments for the Surry and Peach Bottom nuclear power plants as part of the NRC-sponsored NUREG-1150 risk assessments. These methods apply to the full range of hazards such as earthquakes, fires, floods, etc. which are collectively known as external events. The methods described in this report have been developed under NRC sponsorship and represent, in many cases, both advancements and simplifications over techniques that have been used in past years. They also include the most up-to-date data bases on equipment seismic fragilities, fire occurrence frequencies and fire damageability thresholds. The methods described here are based on making full utilization of the power plant systems logic models developed in the internal events analyses. By making full use of the internal events models one obtains an external event analysis that is consistent both in nomenclature and in level of detail with the internal events analyses, and in addition, automatically includes all the appropriate random and tests/maintenance unavailabilities as appropriate. 50 refs., 9 figs., 11 tabs

Improved Dietary Guidelines for Vitamin D: Application of Individual Participant Data (IPD)-Level Meta-Regression Analyses

Science.gov (United States)

Cashman, Kevin D.; Ritz, Christian; Kiely, Mairead

2017-01-01

Dietary Reference Values (DRVs) for vitamin D have a key role in the prevention of vitamin D deficiency. However, despite adopting similar risk assessment protocols, estimates from authoritative agencies over the last 6 years have been diverse. This may have arisen from diverse approaches to data analysis. Modelling strategies for pooling of individual subject data from cognate vitamin D randomized controlled trials (RCTs) are likely to provide the most appropriate DRV estimates. Thus, the objective of the present work was to undertake the first-ever individual participant data (IPD)-level meta-regression, which is increasingly recognized as best practice, from seven winter-based RCTs (with 882 participants ranging in age from 4 to 90 years) of the vitamin D intake–serum 25-hydroxyvitamin D (25(OH)D) dose-response. Our IPD-derived estimates of vitamin D intakes required to maintain 97.5% of 25(OH)D concentrations >25, 30, and 50 nmol/L across the population are 10, 13, and 26 µg/day, respectively. In contrast, standard meta-regression analyses with aggregate data (as used by several agencies in recent years) from the same RCTs estimated that a vitamin D intake requirement of 14 µg/day would maintain 97.5% of 25(OH)D >50 nmol/L. These first IPD-derived estimates offer improved dietary recommendations for vitamin D because the underpinning modeling captures the between-person variability in response of serum 25(OH)D to vitamin D intake. PMID:28481259

Improved Dietary Guidelines for Vitamin D: Application of Individual Participant Data (IPD-Level Meta-Regression Analyses

Directory of Open Access Journals (Sweden)

Kevin D. Cashman

2017-05-01

Full Text Available Dietary Reference Values (DRVs for vitamin D have a key role in the prevention of vitamin D deficiency. However, despite adopting similar risk assessment protocols, estimates from authoritative agencies over the last 6 years have been diverse. This may have arisen from diverse approaches to data analysis. Modelling strategies for pooling of individual subject data from cognate vitamin D randomized controlled trials (RCTs are likely to provide the most appropriate DRV estimates. Thus, the objective of the present work was to undertake the first-ever individual participant data (IPD-level meta-regression, which is increasingly recognized as best practice, from seven winter-based RCTs (with 882 participants ranging in age from 4 to 90 years of the vitamin D intake–serum 25-hydroxyvitamin D (25(OHD dose-response. Our IPD-derived estimates of vitamin D intakes required to maintain 97.5% of 25(OHD concentrations >25, 30, and 50 nmol/L across the population are 10, 13, and 26 µg/day, respectively. In contrast, standard meta-regression analyses with aggregate data (as used by several agencies in recent years from the same RCTs estimated that a vitamin D intake requirement of 14 µg/day would maintain 97.5% of 25(OHD >50 nmol/L. These first IPD-derived estimates offer improved dietary recommendations for vitamin D because the underpinning modeling captures the between-person variability in response of serum 25(OHD to vitamin D intake.

Additive manufactured serialization

Science.gov (United States)

Bobbitt, III, John T.

2017-04-18

Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

Effects of stocking density of freshwater prawn Macrobrachium rosenbergii and addition of different levels of tilapia Oreochromis niloticus on production in C/N controlled periphyton based system

NARCIS (Netherlands)

Asaduzzaman, M.; Wahab, M.A.; Verdegem, M.C.J.; Mondal, M.N.; Azim, M.E.

2009-01-01

An on-station trial was conducted to evaluate the effect of stocking density of freshwater prawn and addition of different levels of tilapia on production in carbon/nitrogen (C/N) controlled periphyton based system. The experiment had a 2 × 3 factorial design, in which two levels of prawn stocking

On the Structure of Personality Disorder Traits: Conjoint Analyses of the CAT-PD, PID-5, and NEO-PI-3 Trait Models

Science.gov (United States)

Wright, Aidan G.C.; Simms, Leonard J.

2014-01-01

The current study examines the relations among contemporary models of pathological and normal range personality traits. Specifically, we report on (a) conjoint exploratory factor analyses of the Computerized Adaptive Test of Personality Disorder static form (CAT-PD-SF) with the Personality Inventory for the DSM-5 (PID-5; Krueger et al., 2012) and NEO Personality Inventory-3 First Half (NEI-PI-3FH; McCrae & Costa, 2007), and (b) unfolding hierarchical analyses of the three measures in a large general psychiatric outpatient sample (N = 628; 64% Female). A five-factor solution provided conceptually coherent alignment among the CAT-PD-SF, PID-5, and NEO-PI-3FH scales. Hierarchical solutions suggested that higher-order factors bear strong resemblance to dimensions that emerge from structural models of psychopathology (e.g., Internalizing and Externalizing spectra). These results demonstrate that the CAT-PD-SF adheres to the consensual structure of broad trait domains at the five-factor level. Additionally, patterns of scale loadings further inform questions of structure and bipolarity of facet and domain level constructs. Finally, hierarchical analyses strengthen the argument for using broad dimensions that span normative and pathological functioning to scaffold a quantitatively derived phenotypic structure of psychopathology to orient future research on explanatory, etiological, and maintenance mechanisms. PMID:24588061

Analyses to assess the level of boron dilution in the VVER-1000 primary circuit

International Nuclear Information System (INIS)

Kral, P.; Macek, J.; Krhounkova, J.

2000-12-01

Thermal hydraulic analyses of loss-of-coolant accidents which can result in volumes with a reduced boric acid concentration were performed by using the RELAP5/MOD3.1 code. Small LOCA were calculated (i) without high-pressure pumps (HPP), (ii) with 1/3 HPP, (iii) with 1/3 HPP and cooling via steam dump station to the atmosphere, and (iv) with 1/3 HPP, cooling via steam dump station to the atmosphere, and star of main coolant pump no. 1. (P.A.)

VESPA: Very large-scale Evolutionary and Selective Pressure Analyses

Directory of Open Access Journals (Sweden)

Andrew E. Webb

2017-06-01

Full Text Available Background Large-scale molecular evolutionary analyses of protein coding sequences requires a number of preparatory inter-related steps from finding gene families, to generating alignments and phylogenetic trees and assessing selective pressure variation. Each phase of these analyses can represent significant challenges, particularly when working with entire proteomes (all protein coding sequences in a genome from a large number of species. Methods We present VESPA, software capable of automating a selective pressure analysis using codeML in addition to the preparatory analyses and summary statistics. VESPA is written in python and Perl and is designed to run within a UNIX environment. Results We have benchmarked VESPA and our results show that the method is consistent, performs well on both large scale and smaller scale datasets, and produces results in line with previously published datasets. Discussion Large-scale gene family identification, sequence alignment, and phylogeny reconstruction are all important aspects of large-scale molecular evolutionary analyses. VESPA provides flexible software for simplifying these processes along with downstream selective pressure variation analyses. The software automatically interprets results from codeML and produces simplified summary files to assist the user in better understanding the results. VESPA may be found at the following website: http://www.mol-evol.org/VESPA.

Hemorrhagic stroke in the Stroke Prevention by Aggressive Reduction in Cholesterol Levels study

DEFF Research Database (Denmark)

Goldstein, L.B.; Amarenco, P.; Szarek, M.

2008-01-01

BACKGROUND: In the Stroke Prevention by Aggressive Reduction in Cholesterol Levels (SPARCL) study, atorvastatin 80 mg/day reduced the risk of stroke in patients with recent stroke or TIA. Post hoc analysis found this overall benefit included an increase in the numbers of treated patients having......: Of 4,731 patients, 67% had ischemic strokes, 31% TIAs, and 2% hemorrhagic strokes as entry events. In addition to atorvastatin treatment (HR 1.68, 95% CI 1.09 to 2.59, p = 0.02), Cox multivariable regression including baseline variables significant in univariable analyses showed that hemorrhagic stroke...... and treatment. Multivariable analyses also found that having Stage 2 (JNC-7) hypertension at the last study visit before a hemorrhagic stroke increased risk (HR 6.19, 95% CI 1.47 to 26.11, p = 0.01), but there was no effect of most recent LDL-cholesterol level in those treated with atorvastatin. CONCLUSIONS...

Effect of Some Local Additives on the Chemical Constituent of Palm Oil

African Journals Online (AJOL)

Different quantities of palm oil from NIFOR plantation were mixed with some local additives (carrot, paw paw, lime and red dye). The oil samples were analysed for their moisture content, saponification value, iodine value, acid value and free fatty acid value before and after the addition of known and constant amount of the ...

Potential effects of climate change on the water level, flora and macro-fauna of a large neotropical wetland.

Directory of Open Access Journals (Sweden)

Bárbara Úbeda

Full Text Available Possible consequences of climate change in one of the world's largest wetlands (Ibera, Argentina were analysed using a multi-scale approach. Climate projections coupled to hydrological models were used to analyse variability in wetland water level throughout the current century. Two potential scenarios of greenhouse gas emissions were explored, both resulting in an increase in the inter-annual fluctuations of the water level. In the scenario with higher emissions, projections also showed a long-term negative trend in water-level. To explore the possible response of biota to such water-level changes, species-area relationships of flora and aerial censuses of macro-fauna were analysed during an extraordinary dry period. Plant species richness at the basin scale was found to be highly resistant to hydrological changes, as the large dimension of the wetland acts to buffer against the water-level variations. However, local diversity decreased significantly with low water levels, leading to the loss of ecosystem resilience to additional stressors. The analysis of macro-fauna populations suggested that wetland provides refuge, in low water periods, for the animals with high dispersal ability (aquatic and migratory birds. On the contrary, the abundance of animals with low dispersal ability (mainly herbivorous species was negatively impacted in low water periods, probably because they are required to search for alternative resources beyond the wetland borders. This period of resource scarcity was also related to increased mortality of large mammals (e.g. marsh deer around water bodies with high anthropogenic enrichment and cyanobacteria dominance. The synergy between recurrent climatic fluctuations and additional stressors (i.e. biological invasions, eutrophication presents an important challenge to the conservation of neotropical wetlands in the coming decades.

Quantitative analyses of schizophrenia-associated metabolites in serum: serum D-lactate levels are negatively correlated with gamma-glutamylcysteine in medicated schizophrenia patients.

Directory of Open Access Journals (Sweden)

Takeshi Fukushima

Full Text Available The serum levels of several metabolites are significantly altered in schizophrenia patients. In this study, we performed a targeted analysis of 34 candidate metabolites in schizophrenia patients (n = 25 and compared them with those in age- and gender-matched healthy subjects (n = 27. Orthogonal partial least square-discriminant analysis revealed that complete separation between controls and patients was achieved based on these metabolites. We found that the levels of γ-glutamylcysteine (γ-GluCys, linoleic acid, arachidonic acid, D-serine, 3-hydroxybutyrate, glutathione (GSH, 5-hydroxytryptamine, threonine, and tyrosine were significantly lower, while D-lactate, tryptophan, kynurenine, and glutamate levels were significantly higher in schizophrenia patients compared to controls. Using receiver operating characteristics (ROC curve analysis, the sensitivity, specificity, and the area under curve of γ-GluCys, a precursor of GSH, and D-lactate, a terminal metabolite of methylglyoxal, were 88.00%, 81.48%, and 0.8874, and 88.00%, 77.78%, and 0.8415, respectively. In addition, serum levels of D-lactate were negatively correlated with γ-GluCys levels in patients, but not in controls. The present results suggest that oxidative stress-induced damage may be involved in the pathogenesis of schizophrenia.

Replacing Phosphorus-Containing Food Additives With Foods Without Additives Reduces Phosphatemia in End-Stage Renal Disease Patients: A Randomized Clinical Trial.

Science.gov (United States)

de Fornasari, Margareth Lage Leite; Dos Santos Sens, Yvoty Alves

2017-03-01

The purpose of the study was to verify the effects of replacing phosphorus-containing food additives with foods without additives on phosphatemia in end-stage renal disease (ESRD) patients. Randomized clinical trial. Adult patients on hemodialysis for ≥6 months at a single center. A total of 134 patients with phosphorus levels of >5.5 mg/dL were included and were randomized into an intervention group (n = 67) and a control group (n = 67). The IG received individual orientation to replace processed foods that have phosphorus additives with foods of similar nutritional value without these additives. The CG received only the nutritional orientation given before the study. Clinical laboratory data, nutritional status, energy and protein intake, and normalized protein nitrogen appearance (nPNA) were evaluated at the beginning of the study and after 90 days. There was no initial difference between the groups in terms of serum phosphorus levels, nutritional status, and energy intake. After 3 months, there was a decline in phosphorus levels in the IG (from 7.2 ± 1.4 to 5.0 ± 1.3 mg/dL, P food additives with foods without additives reduced serum phosphorus without interfering in the nutritional status of ESRD patients. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Response of Functional Structure of Soil Microbial Community to Multi-level Nitrogen Additions on the Central Tibetan Plateau

Science.gov (United States)

Zhang, G.; Yuan, Y.

2015-12-01

The use of fossil fuels and fertilizers has increased the amount of biologically reactive nitrogen in the atmosphere over the past century. Tibet is the one of the most threatened regions by nitrogen deposition, thus understanding how its microbial communities function maybe of high importance to predicting microbial responses to nitrogen deposition. Here we describe a short-time nitrogen addition conducted in an alpine steppe ecosystem to investigate the response of functional structure of soil microbial community to multi-level nitrogen addition. Using a GeoChip 4.0, we showed that functional diversities and richness of functional genes were unchanged at low level of nitrogen fertilizer inputs (=40 kg N ha-1 yr-1). Detrended correspondence analysis indicated that the functional structure of microbial communities was markedly different across the nitrogen gradients. Most C degradation genes whose abundances significantly increased under elevated N fertilizer were those involved in the degradation of relatively labile C (starch, hemicellulose, cellulose), whereas the abundance of certain genes involved in the degradation of recalcitrant C (i.e. lignin) was largely decreased (such as manganese peroxidase, mnp). The results suggest that the elevated N fertilization rates might significantly accelerate the labile C degradation, but might not spur recalcitrant C degradation. The combined effect of gdh and ureC genes involved in N cycling appeared to shift the balance between ammonia and organic N toward organic N ammonification and hence increased the N mineralization potential. Moreover, Urease directly involved in urea mineralization significantly increased. Lastly, Canonical correspondence analysis showed that soil (TOC+NH4++NO3-+NO2-+pH) and plant (Aboveground plant productivity + Shannon Diversity) variables could explain 38.9% of the variation of soil microbial community composition. On the basis of above observations, we predict that increasing of nitrogen

Ruminal degradation kinetic of Brachiaria decumbens silages with different nitrogen additives

Directory of Open Access Journals (Sweden)

Odimári Pricila Pires do Prado

2014-02-01

Full Text Available This study aimed to assess levels of nitrogen additive Silogen® pasto on ruminal in vitro degradability gas production in Brachiaria decumbens silages. The nitrogen additive contained bacterial strains (Bacillus subtilis, Lactobacillus curvatus, Lactobacillus plantarum and Pediococcus acidilactici and minimum nitrogen to 360 g/kg. The levels were: 0.0; 1.0; 1.5; 2.0 and 2.5%. In fractionation were calculated total carbohydrates (TC, non-fiber carbohydrates (NFC, soluble and rapidly degradable (A + B1, potentially degradable (B2 and degradable (C. The kinetic parameters of FC and NFC were estimated using the technique of in vitro gas production. Data were subjected to analysis of variance at 5%. The level additive did not influence the TC and fraction A + B1. The levels of nitrogen additive influenced the NFC, fractions B2 and C. For NFC content 2.0% showed the lowest (22.0 %. The lower levels of additive nitrogen (0, 1.0 and 1.5 % had higher fractions of B2 (average 40.2 % and lower values for the fraction C (average 20.0 % . There was no difference in the volume of gas CNF (average 86.73 mL and final volume of gas produced (average 195.79 mL. Was no influence of nitrogen additives for the time of colonization, the lowest time of 3.89 h to 1.0%. The volume of gas of FC was influenced by levels of nitrogen additives with higher values to 0 % from 1.0 %, and 114.74 and 115.09 mL, respectively. Degradation rates of FC and FNC were also affected by the concentrations of nitrogenous additives, which presented higher rates to the levels of 2.0 and 2.5%. It follows that the lower levels of additives to 1.5 % promoted the reduction of the C fraction and increased B2, and greater production of gas volume of the fiber in these silages, showing better nutritional value in these silages.

Chapter No.4. Safety analyses

International Nuclear Information System (INIS)

2002-01-01

In 2001 the activity in the field of safety analyses was focused on verification of the safety analyses reports for NPP V-2 Bohunice and NPP Mochovce concerning the new profiled fuel and probabilistic safety assessment study for NPP Mochovce. The calculation safety analyses were performed and expert reviews for the internal UJD needs were elaborated. An important part of work was performed also in solving of scientific and technical tasks appointed within bilateral projects of co-operation between UJD and its international partnership organisations as well as within international projects ordered and financed by the European Commission. All these activities served as an independent support for UJD in its deterministic and probabilistic safety assessment of nuclear installations. A special attention was paid to a review of probabilistic safety assessment study of level 1 for NPP Mochovce. The probabilistic safety analysis of NPP related to the full power operation was elaborated in the study and a contribution of the technical and operational improvements to the risk decreasing was quantified. A core damage frequency of the reactor was calculated and the dominant initiating events and accident sequences with the major contribution to the risk were determined. The target of the review was to determine the acceptance of the sources of input information, assumptions, models, data, analyses and obtained results, so that the probabilistic model could give a real picture of the NPP. The review of the study was performed in co-operation of UJD with the IAEA (IPSART mission) as well as with other external organisations, which were not involved in the elaboration of the reviewed document and probabilistic model of NPP. The review was made in accordance with the IAEA guidelines and methodical documents of UJD and US NRC. In the field of calculation safety analyses the UJD activity was focused on the analysis of an operational event, analyses of the selected accident scenarios

The role of a FADS1 polymorphism in the association of fatty acid blood levels, BMI and blood pressure in young children-Analyses based on path models.

Directory of Open Access Journals (Sweden)

Maike Wolters

Full Text Available The recent obesity epidemic in children also showed an increase in the prevalence of hypertension. As blood pressure (BP is associated with (long-chain polyunsaturated fatty acids (LC PUFA, genetic variation in desaturase enzymes being involved in the synthesis of LC PUFA may be associated with BP. This study aimed to investigate the direct effects (independent of mediating variables and indirect effects (mediated through intermediate variables of a common variant in the FADS1 gene, rs174546, known to affect delta-5 desaturase (D5D activity on PUFA level, body mass index (BMI and BP.A subsample of the IDEFICS (Identification and prevention of dietary- and lifestyle-induced health effects in children and infants baseline survey including 520 children aged 2 to <10 years from six European countries was included. The association between rs174546 (Tlevels (dihomo-gamma-linolenic acid, DGLA; arachidonic acid, ARA; eicosapentaenoic acid, EPA or estimated D5D activity (D5D index and BMI z-score were investigated through path model analyses, adjusting for sex, age, educational level of parents, family history of hypertension, lifestyle factors and blood levels of saturated and monounsaturated fatty acids, triglycerides and low density lipoprotein cholesterol. Whole blood fatty acids were measured by a validated gas chromatographic method and recorded as percentage of weight of all fatty acids detected.Minor allele carriers of the SNP rs174546 had significantly higher DGLA and lower ARA and EPA levels as well as a lower D5D index. Via ARA and BMI z-score, the polymorphism had an indirect lowering effect on systolic BP z-score for each additional T allele (standardized effect estimate -0.057, p = 0.007. For DGLA, EPA and D5D index, the indirect effects of rs174546 on systolic BP were also negative but did not reach significance. DGLA and EPA had an increasing indirect effect on

Shotgun pyrosequencing metagenomic analyses of dusts from swine confinement and grain facilities.

Science.gov (United States)

Boissy, Robert J; Romberger, Debra J; Roughead, William A; Weissenburger-Moser, Lisa; Poole, Jill A; LeVan, Tricia D

2014-01-01

Inhalation of agricultural dusts causes inflammatory reactions and symptoms such as headache, fever, and malaise, which can progress to chronic airway inflammation and associated diseases, e.g. asthma, chronic bronchitis, chronic obstructive pulmonary disease, and hypersensitivity pneumonitis. Although in many agricultural environments feed particles are the major constituent of these dusts, the inflammatory responses that they provoke are likely attributable to particle-associated bacteria, archaebacteria, fungi, and viruses. In this study, we performed shotgun pyrosequencing metagenomic analyses of DNA from dusts from swine confinement facilities or grain elevators, with comparisons to dusts from pet-free households. DNA sequence alignment showed that 19% or 62% of shotgun pyrosequencing metagenomic DNA sequence reads from swine facility or household dusts, respectively, were of swine or human origin, respectively. In contrast only 2% of such reads from grain elevator dust were of mammalian origin. These metagenomic shotgun reads of mammalian origin were excluded from our analyses of agricultural dust microbiota. The ten most prevalent bacterial taxa identified in swine facility compared to grain elevator or household dust were comprised of 75%, 16%, and 42% gram-positive organisms, respectively. Four of the top five swine facility dust genera were assignable (Clostridium, Lactobacillus, Ruminococcus, and Eubacterium, ranging from 4% to 19% relative abundance). The relative abundances of these four genera were lower in dust from grain elevators or pet-free households. These analyses also highlighted the predominance in swine facility dust of Firmicutes (70%) at the phylum level, Clostridia (44%) at the Class level, and Clostridiales at the Order level (41%). In summary, shotgun pyrosequencing metagenomic analyses of agricultural dusts show that they differ qualitatively and quantitatively at the level of microbial taxa present, and that the bioinformatic analyses

Shotgun pyrosequencing metagenomic analyses of dusts from swine confinement and grain facilities.

Directory of Open Access Journals (Sweden)

Robert J Boissy

Full Text Available Inhalation of agricultural dusts causes inflammatory reactions and symptoms such as headache, fever, and malaise, which can progress to chronic airway inflammation and associated diseases, e.g. asthma, chronic bronchitis, chronic obstructive pulmonary disease, and hypersensitivity pneumonitis. Although in many agricultural environments feed particles are the major constituent of these dusts, the inflammatory responses that they provoke are likely attributable to particle-associated bacteria, archaebacteria, fungi, and viruses. In this study, we performed shotgun pyrosequencing metagenomic analyses of DNA from dusts from swine confinement facilities or grain elevators, with comparisons to dusts from pet-free households. DNA sequence alignment showed that 19% or 62% of shotgun pyrosequencing metagenomic DNA sequence reads from swine facility or household dusts, respectively, were of swine or human origin, respectively. In contrast only 2% of such reads from grain elevator dust were of mammalian origin. These metagenomic shotgun reads of mammalian origin were excluded from our analyses of agricultural dust microbiota. The ten most prevalent bacterial taxa identified in swine facility compared to grain elevator or household dust were comprised of 75%, 16%, and 42% gram-positive organisms, respectively. Four of the top five swine facility dust genera were assignable (Clostridium, Lactobacillus, Ruminococcus, and Eubacterium, ranging from 4% to 19% relative abundance. The relative abundances of these four genera were lower in dust from grain elevators or pet-free households. These analyses also highlighted the predominance in swine facility dust of Firmicutes (70% at the phylum level, Clostridia (44% at the Class level, and Clostridiales at the Order level (41%. In summary, shotgun pyrosequencing metagenomic analyses of agricultural dusts show that they differ qualitatively and quantitatively at the level of microbial taxa present, and that the

Soil analyses by ICP-MS (Review)

International Nuclear Information System (INIS)

Yamasaki, Shin-ichi

2000-01-01

Soil analyses by inductively coupled plasma mass spectrometry (ICP-MS) are reviewed. The first half of the paper is devoted to the development of techniques applicable to soil analyses, where diverse analytical parameters are carefully evaluated. However, the choice of soil samples is somewhat arbitrary, and only a limited number of samples (mostly reference materials) are examined. In the second half, efforts are mostly concentrated on the introduction of reports, where a large number of samples and/or very precious samples have been analyzed. Although the analytical techniques used in these reports are not necessarily novel, valuable information concerning such topics as background levels of elements in soils, chemical forms of elements in soils and behavior of elements in soil ecosystems and the environment can be obtained. The major topics discussed are total elemental analysis, analysis of radionuclides with long half-lives, speciation, leaching techniques, and isotope ratio measurements. (author)

Global metabolic analyses identify key differences in metabolite levels between polymyxin-susceptible and polymyxin-resistant Acinetobacter baumannii.

Science.gov (United States)

Maifiah, Mohd Hafidz Mahamad; Cheah, Soon-Ee; Johnson, Matthew D; Han, Mei-Ling; Boyce, John D; Thamlikitkul, Visanu; Forrest, Alan; Kaye, Keith S; Hertzog, Paul; Purcell, Anthony W; Song, Jiangning; Velkov, Tony; Creek, Darren J; Li, Jian

2016-02-29

Multidrug-resistant Acinetobacter baumannii presents a global medical crisis and polymyxins are used as the last-line therapy. This study aimed to identify metabolic differences between polymyxin-susceptible and polymyxin-resistant A. baumannii using untargeted metabolomics. The metabolome of each A. baumannii strain was measured using liquid chromatography-mass spectrometry. Multivariate and univariate statistics and pathway analyses were employed to elucidate metabolic differences between the polymyxin-susceptible and -resistant A. baumannii strains. Significant differences were identified between the metabolic profiles of the polymyxin-susceptible and -resistant A. baumannii strains. The lipopolysaccharide (LPS) deficient, polymyxin-resistant 19606R showed perturbation in specific amino acid and carbohydrate metabolites, particularly pentose phosphate pathway (PPP) and tricarboxylic acid (TCA) cycle intermediates. Levels of nucleotides were lower in the LPS-deficient 19606R. Furthermore, 19606R exhibited a shift in its glycerophospholipid profile towards increased abundance of short-chain lipids compared to the parent polymyxin-susceptible ATCC 19606. In contrast, in a pair of clinical isolates 03-149.1 (polymyxin-susceptible) and 03-149.2 (polymyxin-resistant, due to modification of lipid A), minor metabolic differences were identified. Notably, peptidoglycan biosynthesis metabolites were significantly depleted in both of the aforementioned polymyxin-resistant strains. This is the first comparative untargeted metabolomics study to show substantial differences in the metabolic profiles of the polymyxin-susceptible and -resistant A. baumannii.

Criticality safety analyses in SKODA JS a.s

International Nuclear Information System (INIS)

Mikolas, P.; Svarny, J.

1999-01-01

This paper describes criticality safety analyses of spent fuel systems for storage and transport of spent fuel performed in SKODA JS s.r.o.. Analyses were performed for different systems both at NPP site including originally designed spent fuel pool with a large pitch between assemblies without any special absorbing material, high density spent fuel pool with an additional absorption by boron steel, depository rack for fresh fuel assemblies with a very large pitch between fuel assemblies, a container for transport of fresh fuel into the reactor pool and a cask for transport and storage of spent fuel and container for final storage depository. required subcriticality has been proven taking into account all possible unfavourable conditions, uncertainties etc. In two cases, burnup credit methodology is expected to be used. (Authors)

Risk assessment of PCDD/Fs levels in human tissues related to major food items based on chemical analyses and micro-EROD assay.

Science.gov (United States)

Tsang, H L; Wu, S C; Wong, C K C; Leung, C K M; Tao, S; Wong, M H

2009-10-01

Nine groups of food items (freshwater fish, marine fish, pork, chicken, chicken eggs, leafy, non-leafy vegetables, rice and flour) and three types of human samples (human milk, maternal serum and cord serum) were collected for the analysis of PCDD/Fs. Results of chemical analysis revealed PCDD/Fs concentrations (pg g(-1) fat) in the following ascending order: pork (0.289 pg g(-1) fat), grass carp (Ctenopharyngodon idellus) (freshwater fish) (0.407), golden thread (Nemipterus virgatus) (marine fish) (0.511), chicken (0.529), mandarin fish (Siniperca kneri) (marine fish) (0.535), chicken egg (0.552), and snubnose pompano (Trachinotus blochii) (marine fish) (1.219). The results of micro-EROD assay showed relatively higher PCDD/Fs levels in fish (2.65 pg g(-1) fat) when compared with pork (0.47), eggs (0.33), chicken (0.13), flour (0.07), vegetables (0.05 pg g(-1) wet wt) and rice (0.05). The estimated average daily intake of PCDD/Fs of 3.51 pg EROD-TEQ/kg bw/day was within the range of WHO Tolerable Daily Intake (1-4 pg WHO-TEQ/kg bw/day) and was higher than the Provisional Tolerable Daily Intake (PMTL) (70 pg for dioxins and dioxin-like PCBs) recommended by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) [Joint FAO/WHO Expert Committee on Food Additives (JECFA), Summary and conclusions of the fifty-seventh meeting, JECFA, 2001.]. Nevertheless, the current findings were significantly lower than the TDI (14 pg WHO-TEQ/kg/bw/day) recommended by the Scientific Committee on Food of the Europe Commission [European Scientific Committee on Food (EU SCF), Opinions on the SCF on the risk assessment of dioxins and dioxin-like PCBs in food, 2000.]. However, it should be noted that micro-EROD assay overestimates the PCDD/Fs levels by 2 to 7 folds which may also amplify the PCDD/Fs levels accordingly. Although the levels of PCDD/Fs obtained from micro-EROD assay were much higher than those obtained by chemical analysis by 2 to 7 folds, it provides a cost-effective and

Effect of Additional Structure on Effective Stack Height of Gas Dispersion in Atmosphere

OpenAIRE

Takenobu Michioka; Koichi Sada; Kazuki Okabayashi

2016-01-01

Wind-tunnel experiments were conducted to evaluate the effect of additional structure (building, sea wall and banking) on the effective stack height, which is usually used in safety analyses of nuclear power facilities in Japan. The effective stack heights were estimated with and without the additional structure in addition to the reactor building while varying several conditions such as the source height, the height of additional structure and the distance between the source position and the...

Review of radionuclide source terms used for performance-assessment analyses

International Nuclear Information System (INIS)

Barnard, R.W.

1993-06-01

Two aspects of the radionuclide source terms used for total-system performance assessment (TSPA) analyses have been reviewed. First, a detailed radionuclide inventory (i.e., one in which the reactor type, decay, and burnup are specified) is compared with the standard source-term inventory used in prior analyses. The latter assumes a fixed ratio of pressurized-water reactor (PWR) to boiling-water reactor (BWR) spent fuel, at specific amounts of burnup and at 10-year decay. TSPA analyses have been used to compare the simplified source term with the detailed one. The TSPA-91 analyses did not show a significant difference between the source terms. Second, the radionuclides used in source terms for TSPA aqueous-transport analyses have been reviewed to select ones that are representative of the entire inventory. It is recommended that two actinide decay chains be included (the 4n+2 ''uranium'' and 4n+3 ''actinium'' decay series), since these include several radionuclides that have potentially important release and dose characteristics. In addition, several fission products are recommended for the same reason. The choice of radionuclides should be influenced by other parameter assumptions, such as the solubility and retardation of the radionuclides

Pathway analyses implicate glial cells in schizophrenia.

Directory of Open Access Journals (Sweden)

Laramie E Duncan

Full Text Available The quest to understand the neurobiology of schizophrenia and bipolar disorder is ongoing with multiple lines of evidence indicating abnormalities of glia, mitochondria, and glutamate in both disorders. Despite high heritability estimates of 81% for schizophrenia and 75% for bipolar disorder, compelling links between findings from neurobiological studies, and findings from large-scale genetic analyses, are only beginning to emerge.Ten publically available gene sets (pathways related to glia, mitochondria, and glutamate were tested for association to schizophrenia and bipolar disorder using MAGENTA as the primary analysis method. To determine the robustness of associations, secondary analyses were performed with: ALIGATOR, INRICH, and Set Screen. Data from the Psychiatric Genomics Consortium (PGC were used for all analyses. There were 1,068,286 SNP-level p-values for schizophrenia (9,394 cases/12,462 controls, and 2,088,878 SNP-level p-values for bipolar disorder (7,481 cases/9,250 controls.The Glia-Oligodendrocyte pathway was associated with schizophrenia, after correction for multiple tests, according to primary analysis (MAGENTA p = 0.0005, 75% requirement for individual gene significance and also achieved nominal levels of significance with INRICH (p = 0.0057 and ALIGATOR (p = 0.022. For bipolar disorder, Set Screen yielded nominally and method-wide significant associations to all three glial pathways, with strongest association to the Glia-Astrocyte pathway (p = 0.002.Consistent with findings of white matter abnormalities in schizophrenia by other methods of study, the Glia-Oligodendrocyte pathway was associated with schizophrenia in our genomic study. These findings suggest that the abnormalities of myelination observed in schizophrenia are at least in part due to inherited factors, contrasted with the alternative of purely environmental causes (e.g. medication effects or lifestyle. While not the primary purpose of our study

[Total analysis of organic rubber additives].

Science.gov (United States)

He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

2010-03-01

In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

A comparison of cephalometric analyses for assessing sagittal jaw relationship

International Nuclear Information System (INIS)

Erum, G.; Fida, M.

2008-01-01

To compare the seven methods of cephalometric analysis for assessing sagittal jaw relationship and to determine the level of agreement between them. Seven methods, describing anteroposterior jaw relationships (A-B plane, ANB, Wits, AXB, AF-BF, FABA and Beta angle) were measured on the lateral cephalographs of 85 patients. Correlation analysis, using Cramer's V-test, was performed to determine the possible agreement between the pair of analyses. The mean age of the sample, comprising 35 males and 50 females was 15 years and 3 months. Statistically significant relationships were found among seven sagittal parameters with p-value <0.001. Very strong correlation was found between AXB and AF-BF distance (r=0.924); and weak correlation between ANB and Beta angle (r=0.377). Wits appraisal showed the greatest coefficient of variability. Despite varying strengths of association, statistically significant correlations were found among seven methods for assessing sagittal jaw relationship. FABA and A-B plane may be used to predict the skeletal class in addition to the established ANB angle. (author)

Defining Investment Additionality for CDM projects - practical approaches

International Nuclear Information System (INIS)

Greiner, Sandra; Michaelowa, Axel

2003-01-01

The environmental integrity of the CDM under the Kyoto Protocol depends on the possibility to avoid giving emission credits to projects that would have happened anyway. Whether and how 'Investment Additionality' of CDM projects has to be determined is currently a part of climate negotiations. We discuss the rationale of companies to invest in projects and analyse possible criteria to determine Investment Additionality from a theoretical point of view. Differences in the type of investment call for the application of different criteria. Although some criteria are better than others, no single criterion can outweigh the others in all respects. We therefore suggest a scheme for additionality testing that aims at matching types of investment and criteria in a sensible way. Criteria are evaluated on the grounds of robustness to manipulation, degree of coverage and appropriateness for testing the investment decision under consideration

Municipal Solid Waste Characterization according to Different Income Levels: A Case Study

Directory of Open Access Journals (Sweden)

Huseyin Kurtulus Ozcan

2016-10-01

Full Text Available Solid waste generation and characterization are some of the most important parameters which affect environmental sustainability. Municipal solid waste (MSW characterization depends on social structure and income levels. This study aims to determine the variations in waste components within MSW mass by income levels and seasonal conditions following the analysis conducted on the characterization of solid wastes produced in the Kartal district of the province of Istanbul, which is the research area of this study. To this end, 1.9 tons of solid waste samples were collected to represent four different lifestyles (high, medium, and low income levels, and downtown in the winter and summer periods, and characterization was made on these samples. In order to support waste characterization, humidity content and calorific value analyses were also conducted and various suggestions were brought towards waste management in line with the obtained findings. According to the results obtained in the study, organic waste had the highest rate of waste mass by 57.69%. Additionally, significant differences were found in municipal solid waste components (MSWC based on income level. Average moisture content (MC of solid waste samples was 71.1% in moisture analyses. The average of calorific (heating value (HHV was calculated as 2518.5 kcal·kg−1.

Validation of endogenous normalizing genes for expression analyses in adult human testis and germ cell neoplasms.

Science.gov (United States)

Svingen, T; Jørgensen, A; Rajpert-De Meyts, E

2014-08-01

The measurement of gene expression levels in cells and tissues typically depends on a suitable point of reference for inferring biological relevance. For quantitative (or real-time) RT-PCR assays, the method of choice is often to normalize gene expression data to an endogenous gene that is stably expressed across the samples analysed: a so-called normalizing or housekeeping gene. Although this is a valid strategy, the identification of stable normalizing genes has proved challenging and a gene showing stable expression across all cells or tissues is unlikely to exist. Therefore, it is necessary to define suitable normalizing genes for specific cells and tissues. Here, we report on the performance of a panel of nine commonly employed normalizing genes in adult human testis and testicular pathologies. Our analyses revealed significant variability in transcript abundance for commonly used normalizers, highlighting the importance of selecting appropriate normalizing genes as comparative measurements can yield variable results when different normalizing genes are employed. Based on our results, we recommend using RPS20, RPS29 or SRSF4 when analysing relative gene expression levels in human testis and associated testicular pathologies. OCT4 and SALL4 can be used with caution as second-tier normalizers when determining changes in gene expression in germ cells and germ cell tumour components, but the relative transcript abundance appears variable between different germ cell tumour types. We further recommend that such studies should be accompanied by additional assessment of histology and cellularity of each sample. © The Author 2014. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Ulex Europaeus Agglutinin-1 Is a Reliable Taste Bud Marker for In Situ Hybridization Analyses.

Science.gov (United States)

Yoshimoto, Joto; Okada, Shinji; Kishi, Mikiya; Misaka, Takumi

2016-03-01

Taste signals are received by taste buds. To better understand the taste reception system, expression patterns of taste-related molecules are determined by in situ hybridization (ISH) analyses at the histological level. Nevertheless, even though ISH is essential for determining mRNA expression, few taste bud markers can be applied together with ISH. Ulex europaeus agglutinin-1 (UEA-1) appears to be a reliable murine taste bud marker based on immunohistochemistry (IHC) analyses. However, there is no evidence as to whether UEA-1 can be used for ISH. Thus, the present study evaluated UEA-1 using various histochemical methods, especially ISH. When lectin staining was performed after ISH procedures, UEA-1 clearly labeled taste cellular membranes and distinctly indicated boundaries between taste buds and the surrounding epithelial cells. Additionally, UEA-1 was determined as a taste bud marker not only when used in single-colored ISH but also when employed with double-labeled ISH or during simultaneous detection using IHC and ISH methods. These results suggest that UEA-1 is a useful marker when conducting analyses based on ISH methods. To clarify UEA-1 staining details, multi-fluorescent IHC (together with UEA-1 staining) was examined, resulting in more than 99% of cells being labeled by UEA-1 and overlapping with KCNQ1-expressing cells. © 2016 The Histochemical Society.

Neutronics-processing interface analyses for the Accelerator Transmutation of Waste (ATW) aqueous-based blanket system

International Nuclear Information System (INIS)

Davidson, J.W.; Battat, M.E.

1993-01-01

Neutronics-processing interface parameters have large impacts on the neutron economy and transmutation performance of an aqueous-based Accelerator Transmutation of Waste (ATW) system. A detailed assessment of the interdependence of these blanket neutronic and chemical processing parameters has been performed. Neutronic performance analyses require that neutron transport calculations for the ATW blanket systems be fully coupled with the blanket processing and include all neutron absorptions in candidate waste nuclides as well as in fission and transmutation products. The effects of processing rates, flux levels, flux spectra, and external-to-blanket inventories on blanket neutronic performance were determined. In addition, the inventories and isotopics in the various subsystems were also calculated for various actinide and long-lived fission product transmutation strategies

Additional Development and Systems Analyses of Pneumatic Technology for High Speed Civil Transport Aircraft

Science.gov (United States)

Englar, Robert J.; Willie, F. Scott; Lee, Warren J.

1999-01-01

In the Task I portion of this NASA research grant, configuration development and experimental investigations have been conducted on a series of pneumatic high-lift and control surface devices applied to a generic High Speed Civil Transport (HSCT) model configuration to determine their potential for improved aerodynamic performance, plus stability and control of higher performance aircraft. These investigations were intended to optimize pneumatic lift and drag performance; provide adequate control and longitudinal stability; reduce separation flowfields at high angle of attack; increase takeoff/climbout lift-to-drag ratios; and reduce system complexity and weight. Experimental aerodynamic evaluations were performed on a semi-span HSCT generic model with improved fuselage fineness ratio and with interchangeable plain flaps, blown flaps, pneumatic Circulation Control Wing (CCW) high-lift configurations, plain and blown canards, a novel Circulation Control (CC) cylinder blown canard, and a clean cruise wing for reference. Conventional tail power was also investigated for longitudinal trim capability. Also evaluated was unsteady pulsed blowing of the wing high-lift system to determine if reduced pulsed mass flow rates and blowing requirements could be made to yield the same lift as that resulting from steady-state blowing. Depending on the pulsing frequency applied, reduced mass flow rates were indeed found able to provide lift augmentation at lesser blowing values than for the steady conditions. Significant improvements in the aerodynamic characteristics leading to improved performance and stability/control were identified, and the various components were compared to evaluate the pneumatic potential of each. Aerodynamic results were provided to the Georgia Tech Aerospace System Design Lab. to conduct the companion system analyses and feasibility study (Task 2) of theses concepts applied to an operational advanced HSCT aircraft. Results and conclusions from these

Sorption analyses in materials science: selected oxides

International Nuclear Information System (INIS)

Fuller, E.L. Jr.; Condon, J.B.; Eager, M.H.; Jones, L.L.

1981-01-01

Physical adsorption studies have been shown to be extremely valuable in studying the chemistry and structure of dispersed materials. Many processes rely on the access to the large amount of surface made available by the high degree of dispersion. Conversely, there are many applications where consolidation of the dispersed solids is required. Several systems (silica gel, alumina catalysts, mineralogic alumino-silicates, and yttrium oxide plasters) have been studied to show the type and amount of chemical and structural information that can be obtained. Some review of current theories is given and additional concepts are developed based on statistical and thermodynamic arguments. The results are applied to sorption data to show that detailed sorption analyses are extremely useful and can provide valuable information that is difficult to obtain by any other means. Considerable emphasis has been placed on data analyses and interpretation of a nonclassical nature to show the potential of such studies that is often not recognized nor utilized

Optimal choice: assessing the probability of additional damage to buildings caused by water level changes of larger areas

Science.gov (United States)

Bijnagte, J. L.; Luger, D.

2012-12-01

description of the method itself validation of the approach is described by applying the theory to an area in the North of The Netherlands, near a canal, where a water level change was considered. This area consists of soft soil overlying sandy deposits. It was found that the damage percentages as given by the theory are in the right order of magnitude when compared to the actual damage observed in this area. For study of a large area affected by subsidence, input parameters have been established based on a field inspection of the state of the buildings present in that area. Groundwater changes resulting from water level adaptations have been calculated based on measurements of the present situation for ten cross sections. Results of the analyses show that lowering of the water table by 0.1-0.15 m influences a relatively small zone next to the canal only. Use of the new damage assesment method shows that even within this influenced zone, which is mostly less than 10 m wide, effects on buildings are rather limited. Almost in all cases the increase of chance of building damage is negligible.

Radioactive Waste Management Complex low-level waste radiological performance assessment

Energy Technology Data Exchange (ETDEWEB)

Maheras, S.J.; Rood, A.S.; Magnuson, S.O.; Sussman, M.E.; Bhatt, R.N.

1994-04-01

This report documents the projected radiological dose impacts associated with the disposal of radioactive low-level waste at the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. This radiological performance assessment was conducted to evaluate compliance with applicable radiological criteria of the US Department of Energy and the US Environmental Protection Agency for protection of the public and the environment. The calculations involved modeling the transport of radionuclides from buried waste, to surface soil and subsurface media, and eventually to members of the public via air, groundwater, and food chain pathways. Projections of doses were made for both offsite receptors and individuals inadvertently intruding onto the site after closure. In addition, uncertainty and sensitivity analyses were performed. The results of the analyses indicate compliance with established radiological criteria and provide reasonable assurance that public health and safety will be protected.

Radioactive Waste Management Complex low-level waste radiological performance assessment

International Nuclear Information System (INIS)

Maheras, S.J.; Rood, A.S.; Magnuson, S.O.; Sussman, M.E.; Bhatt, R.N.

1994-04-01

This report documents the projected radiological dose impacts associated with the disposal of radioactive low-level waste at the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory. This radiological performance assessment was conducted to evaluate compliance with applicable radiological criteria of the US Department of Energy and the US Environmental Protection Agency for protection of the public and the environment. The calculations involved modeling the transport of radionuclides from buried waste, to surface soil and subsurface media, and eventually to members of the public via air, groundwater, and food chain pathways. Projections of doses were made for both offsite receptors and individuals inadvertently intruding onto the site after closure. In addition, uncertainty and sensitivity analyses were performed. The results of the analyses indicate compliance with established radiological criteria and provide reasonable assurance that public health and safety will be protected

Extraversion and psychopathology: A facet-level analysis.

Science.gov (United States)

Watson, David; Stasik, Sara M; Ellickson-Larew, Stephanie; Stanton, Kasey

2015-05-01

The goal of this study was to explicate how the lower order facets of extraversion are related to psychopathology. We used a "bottom-up" approach in which specific extraversion scales from 3 comprehensive personality inventories were used to model these facets as latent factors. We collected both self-report and interview measures of a broad range of psychopathology from a large community sample. Replicating previous findings using a similar approach (Naragon-Gainey & Watson, 2014; Naragon-Gainey, Watson, & Markon, 2009), structural analyses yielded four factors: Positive Emotionality, Sociability, Assertiveness, and Experience Seeking. Scores on these latent dimensions were related to psychopathology in correlational analyses and in two sets of regressions (the first series used the four facets as predictors; the second included composite scores on the other Big Five domains as additional predictors). These results revealed a striking level of specificity. As predicted, Positive Emotionality displayed especially strong negative links to depressive symptoms and diagnoses. Sociability also was negatively related to psychopathology, showing particularly strong associations with indicators of social dysfunction and the negative symptoms of schizotypy (i.e., social anxiety, social aloofness, and restricted affectivity). Assertiveness generally had weak associations at the bivariate level but was negatively related to social anxiety and was positively correlated with some forms of externalizing. Finally, Experience Seeking had substantial positive associations with a broad range of indicators related to externalizing and bipolar disorder; it also displayed negative links to agoraphobia. These differential correlates demonstrate the importance of examining personality-psychopathology relations at the specific facet level. (c) 2015 APA, all rights reserved).

[Cost-Effectiveness and Cost-Utility Analyses of Antireflux Medicine].

Science.gov (United States)

Gockel, Ines; Lange, Undine Gabriele; Schürmann, Olaf; Jansen-Winkeln, Boris; Sibbel, Rainer; Lyros, Orestis; von Dercks, Nikolaus

2018-04-12

Laparoscopic antireflux surgery and medical therapy with proton pump inhibitors are gold standards of gastroesophageal reflux treatment. On account of limited resources and increasing healthcare needs and costs, in this analysis, not only optimal medical results, but also superiority in health economics of these 2 methods are evaluated. We performed an electronic literature survey in MEDLINE, PubMed, Cochrane Library, ISRCTN (International Standard Randomization Controlled Trial Number) as well as in the NHS Economic Evaluation Database, including studies published until 1/2017. Only studies considering the effect size of QALY (Quality-Adjusted Life Years) (with respect to different quality of life-scores) as primary outcome comparing laparoscopic fundoplication and medical therapy were included. Criteria of comparison were ICER (Incremental Cost-Effectiveness Ratio) and ICUR (Incremental Cost-Utility Ratio). Superiority of the respective treatment option for each publication was worked out. In total, 18 comparative studies were identified in the current literature with respect to above-mentioned search terms, qualifying for the defined inclusion criteria. Six studies were finally selected for analyses. Out of 6 publications, 3 showed superiority of laparoscopic fundoplication over long-term medical management based on current cost-effectiveness data. Limitations were related to different time intervals, levels of evidence of studies and underlying resources/costs of analyses, healthcare systems and applied quality of life instruments. Future prospective, randomized trials should examine this comparison in greater detail. Additionally, there is a large potential for further research in the health economics assessment of early diagnosis and prevention measures of reflux disease and Barrett's esophagus/carcinoma. © Georg Thieme Verlag KG Stuttgart · New York.

Fracture Mechanics Analyses of Reinforced Carbon-Carbon Wing-Leading-Edge Panels

Science.gov (United States)

Raju, Ivatury S.; Phillips, Dawn R.; Knight, Norman F., Jr.; Song, Kyongchan

2010-01-01

Fracture mechanics analyses of subsurface defects within the joggle regions of the Space Shuttle wing-leading-edge RCC panels are performed. A 2D plane strain idealized joggle finite element model is developed to study the fracture behavior of the panels for three distinct loading conditions - lift-off and ascent, on-orbit, and entry. For lift-off and ascent, an estimated bounding aerodynamic pressure load is used for the analyses, while for on-orbit and entry, thermo-mechanical analyses are performed using the extreme cold and hot temperatures experienced by the panels. In addition, a best estimate for the material stress-free temperature is used in the thermo-mechanical analyses. In the finite element models, the substrate and coating are modeled separately as two distinct materials. Subsurface defects are introduced at the coating-substrate interface and within the substrate. The objective of the fracture mechanics analyses is to evaluate the defect driving forces, which are characterized by the strain energy release rates, and determine if defects can become unstable for each of the loading conditions.

BWR core melt progression phenomena: Experimental analyses

International Nuclear Information System (INIS)

Ott, L.J.

1992-01-01

In the BWR Core Melt in Progression Phenomena Program, experimental results concerning severe fuel damage and core melt progression in BWR core geometry are used to evaluate existing models of the governing phenomena. These include control blade eutectic liquefaction and the subsequent relocation and attack on the channel box structure; oxidation heating and hydrogen generation; Zircaloy melting and relocation; and the continuing oxidation of zirconium with metallic blockage formation. Integral data have been obtained from the BWR DF-4 experiment in the ACRR and from BWR tests in the German CORA exreactor fuel-damage test facility. Additional integral data will be obtained from new CORA BWR test, the full-length FLHT-6 BWR test in the NRU test reactor, and the new program of exreactor experiments at Sandia National Laboratories (SNL) on metallic melt relocation and blockage formation. an essential part of this activity is interpretation and use of the results of the BWR tests. The Oak Ridge National Laboratory (ORNL) has developed experiment-specific models for analysis of the BWR experiments; to date, these models have permitted far more precise analyses of the conditions in these experiments than has previously been available. These analyses have provided a basis for more accurate interpretation of the phenomena that the experiments are intended to investigate. The results of posttest analyses of BWR experiments are discussed and significant findings from these analyses are explained. The ORNL control blade/canister models with materials interaction, relocation and blockage models are currently being implemented in SCDAP/RELAP5 as an optional structural component

Improving Rural Women Income through Cocoyam Value Addition ...

African Journals Online (AJOL)

User

empowered rural women to become entrepreneurs at various levels. ... have showed that value added agriculture can be one way to preserve small farmers .... The results in Table 2 show the level of utilization of cocoyam value addition.

Reaffirmation of additional (supplementary payments in company law of Republic of Serbia

Directory of Open Access Journals (Sweden)

Šogorov Stevan

2012-01-01

Full Text Available Subject matter of this article is development of legal regulation if additional payments in Serbia, from 1937 Commercial Code of Kingdom of Yugoslavia till nowadays. In introductory part author underlines legal nature, commercial function and importance of additional payments in private companies, with downfalls in regulation, court and busyness practice. 1988 Enterprise Act and 2004 Company Act has no regulations at all regarding additional payments. 1996 Enterprise Act and 2011 Company Act have provisions on additional payments, but with numerous weaknesses and open questions. Though critical analyses author underlines basic characteristics of additional payments included critical issues which may be expected during application of new legislature.

A screening method based on UV-Visible spectroscopy and multivariate analysis to assess addition of filler juices and water to pomegranate juices.

Science.gov (United States)

Boggia, Raffaella; Casolino, Maria Chiara; Hysenaj, Vilma; Oliveri, Paolo; Zunin, Paola

2013-10-15

Consumer demand for pomegranate juice has considerably grown, during the last years, for its potential health benefits. Since it is an expensive functional food, cheaper fruit juices addition (i.e., grape and apple juices) or its simple dilution, or polyphenols subtraction are deceptively used. At present, time-consuming analyses are used to control the quality of this product. Furthermore these analyses are expensive and require well-trained analysts. Thus, the purpose of this study was to propose a high-speed and easy-to-use shortcut. Based on UV-VIS spectroscopy and chemometrics, a screening method is proposed to quickly screening some common fillers of pomegranate juice that could decrease the antiradical scavenging capacity of pure products. The analytical method was applied to laboratory prepared juices, to commercial juices and to representative experimental mixtures at different levels of water and filler juices. The outcomes were evaluated by means of multivariate exploratory analysis. The results indicate that the proposed strategy can be a useful screening tool to assess addition of filler juices and water to pomegranate juices. Copyright © 2012 Elsevier Ltd. All rights reserved.

Analysis of conservativity analysis for clearance levels. Final report

International Nuclear Information System (INIS)

Deckert, A.; Thierfeldt, S.

1997-07-01

When deriving clearance levels for material from nuclear installations it is necessary to proceed with a certain degree of conservativity. This can, however, differ between various sets of clearance levels leading to inconsistencies between clearance pathways. The aim of the work therefore is to compare levels of conservativity for the following two sets of clearance levels: clearance levels for disposal as conventional waste and for metallic materials for recycling/reuse. A method was developed to quantify the degree of conservativity and make it comparable. The actual and future situation for disposal of (conventional) wastes in Germany was analysed. In addition, the masses, nuclide vectors, geographical distribution etc. for slightly radioactive material being cleared for conventional disposal was analysed and modelled and the resulting dose distributions were calculated. The values for the clearance levels were taken from the 1995 recommendation by the German Commission on Radiation Protection (SSK). By using realistic scenarios, the exposure was calculated for the personnel on the landfills and for persons of the general public being exposed via groundwater pathways. It could be shown that the trivial dose range will not be exceeded even if the masses of cleared material per landfill site exceed 100 Mg/a. Because of the types and distribution of nuclear installations in Germany and because of the nuclide vectors it is therefore not necessary to limit the masses per landfill sites. Clearance levels that are determined by the exposure pathways external exposure to and the inhalation of dust by the landfill personnel show a similar level of conservativity as those for metal scrap. This means that the clearance levels for gamma emitting nuclides are not overly restrictive. Although radiologically justified, raising the clearance levels would not lead to an increase of the material quantities because other nuclides of the respective nuclide vectors are limiting. In

Yoghurts with addition of selected vegetables: acidity, antioxidant properties and sensory quality.

Science.gov (United States)

Najgebauer-Lejko, Dorota; Grega, Tadeusz; Tabaszewska, Małgorzata

2014-01-01

Yoghurt is a fermented milk of unique sensory, nutritive and dietetic value offered in a variety of types and in different flavours. Vegetables belong to the group of food products rich in antioxidant substances (e.g., vitamin C, carotenoids, tocopherols, polyphenols) which regular consumption lowers the risk of many diseases including cancers and cardiovascular disorders. The aim of the present work was to manufacture and assess the acidity, sensory quality and antioxidant capacity of yoghurts with addition of selected vegetables during 2-week refrigerated storage. The vegetable preparations (carrot, pumpkin, broccoli and red sweet pepper) were added to the cow's milk fermented using DVS type yoghurt culture after initial cooling to 15-20°C in the amount of 10% (w/w). The following analyses were performed: determination of pH, titratable acidity, antioxidant activity by ferric reducing antioxidant power (FRAP) and 2,2'-diphenyl-1-picrylhydrazyl (DPPH) method as well as sensory evaluation and were conducted after 1, 7 and 14 days of cold storage. The yoghurt supplementation with selected vegetables had no significant effect on the pH and titratable acidity level. The highest ability to scavenge DPPH radicals was stated for yoghurts with broccoli and red sweet pepper. The latter treatment gained the highest notes in sensory evaluation. All vegetable yoghurts were characterised by higher than the natural yoghurt FRAP values measured directly after production. However, the level of this parameter significantly decreased after storage. The red sweet pepper additive was the most beneficial regarding antioxidant properties and organoleptic acceptance of the studied yoghurts.

Kinetics of Hydrogen Abstraction and Addition Reactions of 3-Hexene by ȮH Radicals.

Science.gov (United States)

Yang, Feiyu; Deng, Fuquan; Pan, Youshun; Zhang, Yingjia; Tang, Chenglong; Huang, Zuohua

2017-03-09

Rate coefficients of H atom abstraction and H atom addition reactions of 3-hexene by the hydroxyl radicals were determined using both conventional transition-state theory and canonical variational transition-state theory, with the potential energy surface (PES) evaluated at the CCSD(T)/CBS//BHandHLYP/6-311G(d,p) level and quantum mechanical effect corrected by the compounded methods including one-dimensional Wigner method, multidimensional zero-curvature tunneling method, and small-curvature tunneling method. Results reveal that accounting for approximate 70% of the overall H atom abstractions occur in the allylic site via both direct and indirect channels. The indirect channel containing two van der Waals prereactive complexes exhibits two times larger rate coefficient relative to the direct one. The OH addition reaction also contains two van der Waals complexes, and its submerged barrier results in a negative temperature coefficient behavior at low temperatures. In contrast, The OH addition pathway dominates only at temperatures below 450 K whereas the H atom abstraction reactions dominate overwhelmingly at temperature over 1000 K. All of the rate coefficients calculated with an uncertainty of a factor of 5 were fitted in a quasi-Arrhenius formula. Analyses on the PES, minimum reaction path and activation free Gibbs energy were also performed in this study.

Dynamic systems approaches and levels of analysis in the nervous system

Science.gov (United States)

Parker, David; Srivastava, Vipin

2013-01-01

Various analyses are applied to physiological signals. While epistemological diversity is necessary to address effects at different levels, there is often a sense of competition between analyses rather than integration. This is evidenced by the differences in the criteria needed to claim understanding in different approaches. In the nervous system, neuronal analyses that attempt to explain network outputs in cellular and synaptic terms are rightly criticized as being insufficient to explain global effects, emergent or otherwise, while higher-level statistical and mathematical analyses can provide quantitative descriptions of outputs but can only hypothesize on their underlying mechanisms. The major gap in neuroscience is arguably our inability to translate what should be seen as complementary effects between levels. We thus ultimately need approaches that allow us to bridge between different spatial and temporal levels. Analytical approaches derived from critical phenomena in the physical sciences are increasingly being applied to physiological systems, including the nervous system, and claim to provide novel insight into physiological mechanisms and opportunities for their control. Analyses of criticality have suggested several important insights that should be considered in cellular analyses. However, there is a mismatch between lower-level neurophysiological approaches and statistical phenomenological analyses that assume that lower-level effects can be abstracted away, which means that these effects are unknown or inaccessible to experimentalists. As a result experimental designs often generate data that is insufficient for analyses of criticality. This review considers the relevance of insights from analyses of criticality to neuronal network analyses, and highlights that to move the analyses forward and close the gap between the theoretical and neurobiological levels, it is necessary to consider that effects at each level are complementary rather than in

USE OF THE SIMPLE LINEAR REGRESSION MODEL IN MACRO-ECONOMICAL ANALYSES

Directory of Open Access Journals (Sweden)

Constantin ANGHELACHE

2011-10-01

Full Text Available The article presents the fundamental aspects of the linear regression, as a toolbox which can be used in macroeconomic analyses. The article describes the estimation of the parameters, the statistical tests used, the homoscesasticity and heteroskedasticity. The use of econometrics instrument in macroeconomics is an important factor that guarantees the quality of the models, analyses, results and possible interpretation that can be drawn at this level.

Cloning, characterisation, and comparative quantitative expression analyses of receptor for advanced glycation end products (RAGE) transcript forms.

Science.gov (United States)

Sterenczak, Katharina A; Willenbrock, Saskia; Barann, Matthias; Klemke, Markus; Soller, Jan T; Eberle, Nina; Nolte, Ingo; Bullerdiek, Jörn; Murua Escobar, Hugo

2009-04-01

RAGE is a member of the immunoglobulin superfamily of cell surface molecules playing key roles in pathophysiological processes, e.g. immune/inflammatory disorders, Alzheimer's disease, diabetic arteriosclerosis and tumourigenesis. In humans 19 naturally occurring RAGE splicing variants resulting in either N-terminally or C-terminally truncated proteins were identified and are lately discussed as mechanisms for receptor regulation. Accordingly, deregulation of sRAGE levels has been associated with several diseases e.g. Alzheimer's disease, Type 1 diabetes, and rheumatoid arthritis. Administration of recombinant sRAGE to animal models of cancer blocked tumour growth successfully. In spite of its obvious relationship to cancer and metastasis data focusing sRAGE deregulation and tumours is rare. In this study we screened a set of tumours, healthy tissues and various cancer cell lines for RAGE splicing variants and analysed their structure. Additionally, we analysed the ratio of the mainly found transcript variants using quantitative Real-Time PCR. In total we characterised 24 previously not described canine and 4 human RAGE splicing variants, analysed their structure, classified their characteristics, and derived their respective protein forms. Interestingly, the healthy and the neoplastic tissue samples showed in majority RAGE transcripts coding for the complete receptor and transcripts showing insertions of intron 1.

WIND SPEED AND ENERGY POTENTIAL ANALYSES

Directory of Open Access Journals (Sweden)

A. TOKGÖZLÜ

2013-01-01

Full Text Available This paper provides a case study on application of wavelet techniques to analyze wind speed and energy (renewable and environmental friendly energy. Solar and wind are main sources of energy that allows farmers to have the potential for transferring kinetic energy captured by the wind mill for pumping water, drying crops, heating systems of green houses, rural electrification's or cooking. Larger wind turbines (over 1 MW can pump enough water for small-scale irrigation. This study tried to initiate data gathering process for wavelet analyses, different scale effects and their role on wind speed and direction variations. The wind data gathering system is mounted at latitudes: 37° 50" N; longitude 30° 33" E and height: 1200 m above mean sea level at a hill near Süleyman Demirel University campus. 10 minutes average values of two levels wind speed and direction (10m and 30m above ground level have been recorded by a data logger between July 2001 and February 2002. Wind speed values changed between the range of 0 m/s and 54 m/s. Annual mean speed value is 4.5 m/s at 10 m ground level. Prevalent wind

Additive effects of LPL, APOA5 and APOE variant combinations on triglyceride levels and hypertriglyceridemia: results of the ICARIA genetic sub-study

Science.gov (United States)

2010-01-01

Background Hypertriglyceridemia (HTG) is a well-established independent risk factor for cardiovascular disease and the influence of several genetic variants in genes related with triglyceride (TG) metabolism has been described, including LPL, APOA5 and APOE. The combined analysis of these polymorphisms could produce clinically meaningful complementary information. Methods A subgroup of the ICARIA study comprising 1825 Spanish subjects (80% men, mean age 36 years) was genotyped for the LPL-HindIII (rs320), S447X (rs328), D9N (rs1801177) and N291S (rs268) polymorphisms, the APOA5-S19W (rs3135506) and -1131T/C (rs662799) variants, and the APOE polymorphism (rs429358; rs7412) using PCR and restriction analysis and TaqMan assays. We used regression analyses to examine their combined effects on TG levels (with the log-transformed variable) and the association of variant combinations with TG levels and hypertriglyceridemia (TG ≥ 1.69 mmol/L), including the covariates: gender, age, waist circumference, blood glucose, blood pressure, smoking and alcohol consumption. Results We found a significant lowering effect of the LPL-HindIII and S447X polymorphisms (p hypertriglyceridemia. PMID:20429872

Physical characterization of biomass-based pyrolysis liquids. Application of standard fuel oil analyses

Energy Technology Data Exchange (ETDEWEB)

Oasmaa, A; Leppaemaeki, E; Koponen, P; Levander, J; Tapola, E [VTT Energy, Espoo (Finland). Energy Production Technologies

1998-12-31

The main purpose of the study was to test the applicability of standard fuel oil methods developed for petroleum-based fuels to pyrolysis liquids. In addition, research on sampling, homogeneity, stability, miscibility and corrosivity was carried out. The standard methods have been tested for several different pyrolysis liquids. Recommendations on sampling, sample size and small modifications of standard methods are presented. In general, most of the methods can be used as such but the accuracy of the analysis can be improved by minor modifications. Fuel oil analyses not suitable for pyrolysis liquids have been identified. Homogeneity of the liquids is the most critical factor in accurate analysis. The presence of air bubbles may disturb in several analyses. Sample preheating and prefiltration should be avoided when possible. The former may cause changes in the composition and structure of the pyrolysis liquid. The latter may remove part of organic material with particles. The size of the sample should be determined on the basis of the homogeneity and the water content of the liquid. The basic analyses of the Technical Research Centre of Finland (VTT) include water, pH, solids, ash, Conradson carbon residue, heating value, CHN, density, viscosity, pourpoint, flash point, and stability. Additional analyses are carried out when needed. (orig.) 53 refs.

Utilization of Large Scale Surface Models for Detailed Visibility Analyses

Science.gov (United States)

Caha, J.; Kačmařík, M.

2017-11-01

This article demonstrates utilization of large scale surface models with small spatial resolution and high accuracy, acquired from Unmanned Aerial Vehicle scanning, for visibility analyses. The importance of large scale data for visibility analyses on the local scale, where the detail of the surface model is the most defining factor, is described. The focus is not only the classic Boolean visibility, that is usually determined within GIS, but also on so called extended viewsheds that aims to provide more information about visibility. The case study with examples of visibility analyses was performed on river Opava, near the Ostrava city (Czech Republic). The multiple Boolean viewshed analysis and global horizon viewshed were calculated to determine most prominent features and visibility barriers of the surface. Besides that, the extended viewshed showing angle difference above the local horizon, which describes angular height of the target area above the barrier, is shown. The case study proved that large scale models are appropriate data source for visibility analyses on local level. The discussion summarizes possible future applications and further development directions of visibility analyses.

Post-facta Analyses of Fukushima Accident and Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Tanabe, Fumiya [Sociotechnical Systems Safety Research Institute, Ichige (Japan)

2014-08-15

Independent analyses have been performed of the core melt behavior of the Unit 1, Unit 2 and Unit 3 reactors of Fukushima Daiichi Nuclear Power Station on 11-15 March 2011. The analyses are based on a phenomenological methodology with measured data investigation and a simple physical model calculation. Estimated are time variation of core water level, core material temperature and hydrogen generation rate. The analyses have revealed characteristics of accident process of each reactor. In the case of Unit 2 reactor, the calculated result suggests little hydrogen generation because of no steam generation in the core for zirconium-steam reaction during fuel damage process. It could be the reason of no hydrogen explosion in the Unit 2 reactor building. Analyses have been performed also on the core material behavior in another chaotic period of 19-31 March 2011, and it resulted in a re-melt hypothesis that core material in each reactor should have melted again due to shortage of cooling water. The hypothesis is consistent with many observed features of radioactive materials dispersion into the environment.

The Barbados Sea Level Record

Science.gov (United States)

Fairbanks, R. G.; Mortlock, R. A.; Abdul, N. A.; Wright, J. D.; Cao, L.; Mey, J. L.

2013-12-01

Additional offshore drill cores, nearly 100 new radiometric dates, and more than 1000 kilometers of Multibeam mapping greatly enhance the Barbados Sea Level record. Extensive Multibeam mapping around the entire island covers approximately 2650 km2 of the sea bottom and now integrates the offshore reef topography and Barbados Sea Level Record with the unparalleled onshore core collection, digital elevation maps, and Pleistocene sea level record spanning the past one million years. The reef crest coral, Acropora palmata, remains the stalwart indicator of sea level for many reasons that are validated by our redundant sea level records and redundant dating via Th/U and Pa/U analyses. Microanalysis and densitometry studies better explain why Acropora palmata is so well preserved in the Pleistocene reef records and therefore why it is the species of choice for sea level reconstructions and radiometric dating. New drill cores into reefs that formed during Marine Isotope Stage 3 lead us to a model of diagenesis that allows us to better prospect for unaltered coral samples in older reefs that may be suitable for Th/U dating. Equally important, our diagenesis model reinforces our rigorous sample quality criteria in a more quantitative manner. The Barbados Sea Level record has a sampling resolution of better than 100 years throughout much of the last deglaciation showing unprecedented detail in redundant drill cores. The Melt Water Pulses (MWP1A and MWP1B) are well resolved and the intervening interval that includes the Younger Dryas reveals sea level changes in new detail that are consistent with the terrestrial records of ice margins (see Abdul et al., this section). More than 100 paired Th/U and radiocarbon ages place the Barbados Sea Level Record unambiguously on the radiocarbon time scale for direct comparisons with the terrestrial records of ice margin changes.

The effect of additives on red cell 2,3 diphosphoglycerate levels in CPDA preservatives.

Science.gov (United States)

Vora, S; West, C; Beutler, E

1989-01-01

Forty-two chemical substances, chosen because they might influence red cell metabolism, were screened for effect on red cell adenosine triphosphate and 2,3 diphosphoglycerate (2,3 DPG) levels during storage in CPD or CPDA-1 at 4 degrees C. Of these substances, six appeared on initial screening to increase 2,3 DPG levels during storage; on repeated examination, four compounds, i.e., oxalate, glyoxalate, ethyl oxaloacetate, and L-phenylalanyl-L-alanine, consistently increased 2,3 DPG levels during storage. It was shown that glyoxalate was converted rapidly to oxalate in blood, presumably through the lactate dehydrogenase reaction. Ethyl oxaloacetate is known to hydrolyze, giving rise to oxalate. Thus, the effect of both glyoxalate and ethyl oxaloacetate can be explained by the formation of oxalate, a compound already known to increase 2,3 DPG levels. The effect of L-phenylalanyl-L-alanine remains to be explained, but it may be hydrolyzed to L-alanine and L-phenylalanine, both of which are thought to have the capacity to increase red cell 2,3 DPG levels by inhibiting pyruvate kinase activity.

Statistical study of chemical additives effects in the waste cementation

International Nuclear Information System (INIS)

Tello, Cledola C.O. de; Diniz, Paula S.; Haucz, Maria J.A.

1997-01-01

This paper presents the statistical study, that was carried out to analyse the chemical additives effect in the waste cementation process. Three different additives from two industries were tested: set accelerator, set retarder and super plasticizers, in cemented pates with and without bentonite. The experiments were planned in accordance with the 2 3 factorial design, so that the effect of each type of additive, its quantity and manufacturer in cemented paste and specimens could be evaluated. The results showed that the use of these can improve the cementation process and the product. The admixture quantity and the association with bentonite were the most important factors affecting the process and product characteristics. (author). 4 refs., 9 figs., 4 tabs

Physical Activity Levels and Well-Being in Older Adults.

Science.gov (United States)

Bae, Wonyul; Ik Suh, Young; Ryu, Jungsu; Heo, Jinmoo

2017-04-01

The objective of this study was to identify the interconnectedness of different intensity levels of physical activity and psychological (life satisfaction and positive affect) and physical (physical health) well-being. Participants were from the National Study of Midlife in the United States with assessments in 2004 and aged 25 to 74 living in the United States were included in the analyses. We conducted bivariate correlations to examine significant relationships among the study variables. In addition, after multicollinearity among the independent variable was checked, a series of hierarchical regression analyses with physical health, positive affect, and life satisfaction as criterion variables were conducted. The results showed that light physical activities were positively associated with physical health and life satisfaction in summer, whereas light physical activities and all dependent variables were positively correlated in winter. Furthermore, engaging in moderate physical activities was positively related only with physical health. Meanwhile, vigorous physical activities were not associated with life satisfaction, physical health, and positive affect in summer and winter.

Increased serum levels of sortilin are associated with depression and correlated with BDNF and VEGF

DEFF Research Database (Denmark)

Buttenschøn, Henriette Nørmølle; Demontis, Ditte; Ollendorff, Mathias Kaas

2015-01-01

measured by immunoassay, and potential determinants of the serum sortilin level were assessed by generalized linear models. Serum levels of brain-derived neurotrophic factor (BDNF) and vascular endothelial growth factor (VEGF) were measured in previous studies. We identified a significant increase of serum...... sortilin levels in depressed individuals compared with controls (P = 0.0002) and significant positive correlation between serum sortilin levels and the corresponding levels of BDNF and VEGF. None of the genotyped SNPs were associated with depression. Additional analyses showed that the serum sortilin level...... was influenced by several other factors. Alcohol intake and body mass index, as well as depression, serum BDNF and serum VEGF were identified as predictors of serum sortilin levels in our final multivariate model. In conclusion, the results suggest a role of circulating sortilin in depression which may relate...

Stabilized zirconia with cerium and neodymium addition

International Nuclear Information System (INIS)

Andrade, I.M. de; Pessoa, R.C.; Nasar, M.C.; Nasar, R.S.; Rodriques, M.K.C.; Oliveira, J.F.

2006-01-01

Zr 0,9 Ce 0,05 Nd 0,05 O 1,975 system was synthesized with the use of the Pechini method. The polymeric resin was calcined at 350 deg C/3 h and analysed by FTIR that show bands relative to organic. Radicals esther type. The TGA curve indicated the polymeric decomposition occurring from 30 deg C to 740 deg C. DTA analysis show a exothermic peak in 100 deg C due to loss of water of material. From 500 deg C to 800 deg C was observed a intense peak due to polymer decomposition and the zirconia crystallization. The calcined powder from 350 deg C/3 h e 30 min to 900 deg/3 h were analysed by XRD that show the crystalline phase formation with the increase of temperature. The X-ray diffraction pattern show the presence of two phases, such as tetragonal and cubic of zirconia demonstrating that neodymium and cerium additions led to zirconia stabilization. (author)

Reduction of Saltiness and Acrylamide Levels in Palm Sugar-Like Flavouring through Buffer Modification and the Addition of Calcium Chloride

Directory of Open Access Journals (Sweden)

Wan Aida Wan Mustapha

2013-06-01

Full Text Available Palm sugar-like flavouring (PSLF is a type of flavour product that is formed by heating amino acids and sugar under specific heating conditions. Unfortunately, PSLF has a salty taste and contains high amounts of acrylamide. Hence, the objective of this research was to reduce saltiness and acrylamide without negatively affecting the aroma properties of PSLF. A decrease in the sodium phosphate (NaHPO4 buffer concentration from 0.20 to 0.02 M was found to reduce sodium to approximately 15% of the level found in original PSLF. A further decrease (~25% in the sodium content was achieved by removing monobasic sodium phosphate (NaH2PO4 from the buffer system. Meanwhile, the addition of CaCl2 at 20–40 mg/L reduced the acrylamide content in PSLF by as much as 58%. A CaCl2 concentration of 20 mg/mL was most favourable as it most efficiently suppressed acrylamide formation while providing an acceptably high flavour yield in PSLF. In view of the high acrylamide content in PSLF, additional work is necessary to further reduce the amount of acrylamide by controlling the asparagine concentration in the precursor mixture.

Reduction of saltiness and acrylamide levels in palm sugar-like flavouring through buffer modification and the addition of calcium chloride.

Science.gov (United States)

Tan, Phui Yee; Tan, Chin Ping; Abas, Faridah; Ho, Chun Wai; Mustapha, Wan Aida Wan

2013-06-10

Palm sugar-like flavouring (PSLF) is a type of flavour product that is formed by heating amino acids and sugar under specific heating conditions. Unfortunately, PSLF has a salty taste and contains high amounts of acrylamide. Hence, the objective of this research was to reduce saltiness and acrylamide without negatively affecting the aroma properties of PSLF. A decrease in the sodium phosphate (NaHPO₄) buffer concentration from 0.20 to 0.02 M was found to reduce sodium to approximately 15% of the level found in original PSLF. A further decrease (~25%) in the sodium content was achieved by removing monobasic sodium phosphate (NaH₂PO₄) from the buffer system. Meanwhile, the addition of CaCl₂ at 20-40 mg/L reduced the acrylamide content in PSLF by as much as 58%. A CaCl₂ concentration of 20 mg/mL was most favourable as it most efficiently suppressed acrylamide formation while providing an acceptably high flavour yield in PSLF. In view of the high acrylamide content in PSLF, additional work is necessary to further reduce the amount of acrylamide by controlling the asparagine concentration in the precursor mixture.

Feasibility of large volume casting cementation process for intermediate level radioactive waste

International Nuclear Information System (INIS)

Chen Zhuying; Chen Baisong; Zeng Jishu; Yu Chengze

1988-01-01

The recent tendency of radioactive waste treatment and disposal both in China and abroad is reviewed. The feasibility of the large volume casting cementation process for treating and disposing the intermediate level radioactive waste from spent fuel reprocessing plant in shallow land is assessed on the basis of the analyses of the experimental results (such as formulation study, solidified radioactive waste properties measurement ect.). It can be concluded large volume casting cementation process is a promising, safe and economic process. It is feasible to dispose the intermediate level radioactive waste from reprocessing plant it the disposal site chosen has resonable geological and geographical conditions and some additional effective protection means are taken

The SNS target station preliminary Title I shielding analyses

International Nuclear Information System (INIS)

Johnson, J.O.; Santoro, R.T.; Lillie, R.A.; Barnes, J.M.; McNeilly, G.S.

2000-01-01

The Department of Energy (DOE) has given the Spallation Neutron Source (SNS) project approval to begin Title I design of the proposed facility to be built at Oak Ridge National Laboratory (ORNL). During the conceptual design phase of the SNS project, the target station bulk-biological shield was characterized and the activation of the major targets station components was calculated. Shielding requirements were assessed with respect to weight, space, and dose-rate constraints for operating, shut-down, and accident conditions utilizing the SNS shield design criteria, DOE Order 5480.25, and requirements specified in 10 CFR 835. Since completion of the conceptual design phase, there have been major design changes to the target station as a result of the initial shielding and activation analyses, modifications brought about due to engineering concerns, and feedback from numerous external review committees. These design changes have impacted the results of the conceptual design analyses, and consequently, have required a re-investigation of the new design. Furthermore, the conceptual design shielding analysis did not address many of the details associated with the engineering design of the target station. In this paper, some of the proposed SNS target station preliminary Title I shielding design analyses will be presented. The SNS facility (with emphasis on the target station), shielding design requirements, calculational strategy, and source terms used in the analyses will be described. Preliminary results and conclusions, along with recommendations for additional analyses, will also be presented. (author)

Estimation of the additive and dominance variances in SA Landrace ...

African Journals Online (AJOL)

NORRIS

South African Journal of Animal Science 2006, 36 (4) ... Fuerst (1996) simulated a genetic model with different levels of additive, dominance and additive by additive genetic effects to .... However, a simulation study by Norris et al. (2002) ...

Flame Retardant Polyamide Fibres: The Challenge of Minimising Flame Retardant Additive Contents with Added Nanoclays

Directory of Open Access Journals (Sweden)

Richard Horrocks

2016-08-01

Full Text Available This work shows that halogen-free, flame retarded polyamide 6 (PA6, fabrics may be produced in which component fibres still have acceptable tensile properties and low levels (preferably ≤10 wt % of additives by incorporating a nanoclay along with two types of flame retardant formulations. The latter include (i aluminium diethyl phosphinate (AlPi at 10 wt %, known to work principally in the vapour phase and (ii ammonium sulphamate (AS/dipentaerythritol (DP system present at 2.5 and 1 wt % respectively, believed to be condense phase active. The nanoclay chosen is an organically modified montmorillonite clay, Cloisite 25A. The effect of each additive system is analysed in terms of its ability to maximise both filament tensile properties relative to 100% PA6 and flame retardant behaviour of knitted fabrics in a vertical orientation. None of the AlPi-containing formulations achieved self-extinguishability, although the presence of nanoclay promoted lower burning and melt dripping rates. The AS/DP-containing formulations with total flame retardant levels of 5.5 wt % or less showed far superior properties and with nanoclay, showed fabric extinction times ≤ 39 s and reduced melt dripping. The tensile and flammability results, supported by thermogravimetric analysis, have been interpreted in terms of the mechanism of action of each flame retardant/nanoclay type.

What is the level of evidence for the amnestic effects of sedatives in pediatric patients? A systematic review and meta-analyses.

Directory of Open Access Journals (Sweden)

Karolline Alves Viana

Full Text Available Studies have suggested that benzodiazepines are amnestic drug par excellence, but when taken together, what level of evidence do they generate? Are other sedatives as amnestic as benzodiazepines? The aim of this study was to assess the level of scientific evidence for the amnestic effect of sedatives in pediatric patients who undergo health procedures.The literature was searched to identify randomized controlled trials that evaluated anterograde and retrograde amnesia in 1-19-year-olds who received sedative drugs during health procedures. Electronic databases, including PubMed, Scopus and Cochrane Library besides clinical trial registries and grey literature were searched. Two independent reviewers performed data extraction and risk of bias assessment using the Cochrane Collaboration's Tool. The meta-analyses were performed by calculating relative risk (RR to 95% confidence intervals (CI. The quality of the evidence was assessed using Grading of Recommendations Assessment, Development and Evaluation approach.Fifty-four studies were included (4,168 participants. A higher occurrence of anterograde amnesia was observed when benzodiazepines, the most well-studied sedatives (n = 47, were used than when placebo was used (n = 12 (RR = 3.10; 95% CI: 2.30-4.19, P<0.001; I2 = 14%, with a moderate level of evidence. Higher doses of alpha2-adrenergic agonists (clonidine/dexmedetomidine produced more anterograde amnesia than lower doses (n = 2 (RR = 1.83; 95% CI: 1.03-3.25; P = 0.038; I2 = 0%, with a low level of evidence; benzodiazepines' amnestic effects were not dose-dependent (n = 3 (RR = 1.54; 95% CI: 0.96-2.49; P = 0.07; I2 = 12% but the evidence was low. A qualitative analysis showed that retrograde amnesia did not occur in 8 out of 10 studies.In children, moderate evidence support that benzodiazepines induce anterograde amnesia, whereas the evidence for other sedatives is weak and based on isolated and small studies. Further clinical trials focused

Towards interoperable and reproducible QSAR analyses: Exchange of datasets.

Science.gov (United States)

Spjuth, Ola; Willighagen, Egon L; Guha, Rajarshi; Eklund, Martin; Wikberg, Jarl Es

2010-06-30

QSAR is a widely used method to relate chemical structures to responses or properties based on experimental observations. Much effort has been made to evaluate and validate the statistical modeling in QSAR, but these analyses treat the dataset as fixed. An overlooked but highly important issue is the validation of the setup of the dataset, which comprises addition of chemical structures as well as selection of descriptors and software implementations prior to calculations. This process is hampered by the lack of standards and exchange formats in the field, making it virtually impossible to reproduce and validate analyses and drastically constrain collaborations and re-use of data. We present a step towards standardizing QSAR analyses by defining interoperable and reproducible QSAR datasets, consisting of an open XML format (QSAR-ML) which builds on an open and extensible descriptor ontology. The ontology provides an extensible way of uniquely defining descriptors for use in QSAR experiments, and the exchange format supports multiple versioned implementations of these descriptors. Hence, a dataset described by QSAR-ML makes its setup completely reproducible. We also provide a reference implementation as a set of plugins for Bioclipse which simplifies setup of QSAR datasets, and allows for exporting in QSAR-ML as well as old-fashioned CSV formats. The implementation facilitates addition of new descriptor implementations from locally installed software and remote Web services; the latter is demonstrated with REST and XMPP Web services. Standardized QSAR datasets open up new ways to store, query, and exchange data for subsequent analyses. QSAR-ML supports completely reproducible creation of datasets, solving the problems of defining which software components were used and their versions, and the descriptor ontology eliminates confusions regarding descriptors by defining them crisply. This makes is easy to join, extend, combine datasets and hence work collectively, but

Towards interoperable and reproducible QSAR analyses: Exchange of datasets

Directory of Open Access Journals (Sweden)

Spjuth Ola

2010-06-01

Full Text Available Abstract Background QSAR is a widely used method to relate chemical structures to responses or properties based on experimental observations. Much effort has been made to evaluate and validate the statistical modeling in QSAR, but these analyses treat the dataset as fixed. An overlooked but highly important issue is the validation of the setup of the dataset, which comprises addition of chemical structures as well as selection of descriptors and software implementations prior to calculations. This process is hampered by the lack of standards and exchange formats in the field, making it virtually impossible to reproduce and validate analyses and drastically constrain collaborations and re-use of data. Results We present a step towards standardizing QSAR analyses by defining interoperable and reproducible QSAR datasets, consisting of an open XML format (QSAR-ML which builds on an open and extensible descriptor ontology. The ontology provides an extensible way of uniquely defining descriptors for use in QSAR experiments, and the exchange format supports multiple versioned implementations of these descriptors. Hence, a dataset described by QSAR-ML makes its setup completely reproducible. We also provide a reference implementation as a set of plugins for Bioclipse which simplifies setup of QSAR datasets, and allows for exporting in QSAR-ML as well as old-fashioned CSV formats. The implementation facilitates addition of new descriptor implementations from locally installed software and remote Web services; the latter is demonstrated with REST and XMPP Web services. Conclusions Standardized QSAR datasets open up new ways to store, query, and exchange data for subsequent analyses. QSAR-ML supports completely reproducible creation of datasets, solving the problems of defining which software components were used and their versions, and the descriptor ontology eliminates confusions regarding descriptors by defining them crisply. This makes is easy to join

Comprehensive research synopsis and systematic meta-analyses in Parkinson's disease genetics: The PDGene database.

Directory of Open Access Journals (Sweden)

Christina M Lill

Full Text Available More than 800 published genetic association studies have implicated dozens of potential risk loci in Parkinson's disease (PD. To facilitate the interpretation of these findings, we have created a dedicated online resource, PDGene, that comprehensively collects and meta-analyzes all published studies in the field. A systematic literature screen of -27,000 articles yielded 828 eligible articles from which relevant data were extracted. In addition, individual-level data from three publicly available genome-wide association studies (GWAS were obtained and subjected to genotype imputation and analysis. Overall, we performed meta-analyses on more than seven million polymorphisms originating either from GWAS datasets and/or from smaller scale PD association studies. Meta-analyses on 147 SNPs were supplemented by unpublished GWAS data from up to 16,452 PD cases and 48,810 controls. Eleven loci showed genome-wide significant (P < 5 × 10(-8 association with disease risk: BST1, CCDC62/HIP1R, DGKQ/GAK, GBA, LRRK2, MAPT, MCCC1/LAMP3, PARK16, SNCA, STK39, and SYT11/RAB25. In addition, we identified novel evidence for genome-wide significant association with a polymorphism in ITGA8 (rs7077361, OR 0.88, P  =  1.3 × 10(-8. All meta-analysis results are freely available on a dedicated online database (www.pdgene.org, which is cross-linked with a customized track on the UCSC Genome Browser. Our study provides an exhaustive and up-to-date summary of the status of PD genetics research that can be readily scaled to include the results of future large-scale genetics projects, including next-generation sequencing studies.

The effect of the additive containing Artichoke extract (APC on growth performance, blood cholesterol level, carcass characteristics and immune system of broiler chickens

Directory of Open Access Journals (Sweden)

farang Rouzmehr

2014-05-01

Full Text Available In order to investigate the effect of different levels of the additive containing Artichoke premix concentrated (APC on growth performance, serum cholesterol level, carcass characteristics and immune responses of broilers two separate trials were conducted. In the first trial, APC was added at three levels of 0, 100 and 200 gr/ton diet during the first 21 days of growing period. One hundred and fifty unsexed day old broiler chickens of Ross strain were randomly divided in three groups with 5 replicate of 10 chicks in each cage, by a completely randomized design. At the end of each week, the birds were weighed individually and feed conversion ratios calculated. In order to determine serum cholesterol level, at day 21 blood sample was taken from 15 chickens per treatment. At the end of the 42nd day, 5 birds from each group were randomly selected and slaughtered for investigation of carcass characteristics. In the second trial, the effects of APC at 150gr/ton feed were studied on growth parameters and immune function of broiler chickens in a commercial farm. The results showed that application of APC in a level of 200 gr/ton diet significantly increased body weight of chickens at the first (p

Nonlinear analyses of spent-fuel racks for consolidated fuel loading

International Nuclear Information System (INIS)

Kabir, A.F.; Godha, P.C.; Malik, L.E.; Bolourchi, S.

1987-01-01

Storage racks for spent-fuel assemblies in nuclear power plants are designed to withstand various combinations of loads generated by gravity, seismic, thermal, and accidental fuel drops. Due to the need for storing increased amounts of spent fuel in the existing fuel pools, many nuclear power utilities are evaluating existing fuel racks to safely carry the additional loads. The current study presents the seismic analyses of existing fuel racks of Northeast Utility Company's Millstone Unit Number 1 (BWR Mark I) nuclear plant to accommodate a 2:1 fuel consolidation. This objective requires rigorous nonlinear analyses to establish the full available capacities of the racks and thereby avoid expensive modifications or minimize any needed upgrades

Analysing Trust Transitivity and The Effects of Unknown Dependence

Directory of Open Access Journals (Sweden)

Touhid Bhuiyan

2010-03-01

Full Text Available Trust can be used to improve online automated recommendation within a given domain. Trust transitivity is used to make it successful. But trust transitivity has different interpretations. Trust and trust transitivity; both are the human mental phenomenon and for this reason, there is no such thing as objective transitivity. Trust transitivity and trust fusion both are important elements in computational trust. This paper analyses the parameter dependence problem in trust transitivity and proposes some definitions considering the effects of base rate. In addition, it also proposes belief functions based on subjective logic to analyse trust transitivity of three specified cases with sensitive and insensitive based rate. Then it presents a quantitative analysis of the effects of unknown dependence problem in an interconnected network environment; such Internet.

Additional 5 kWe thermoelectric system temperature transients

International Nuclear Information System (INIS)

Halfen, F.J.

1972-01-01

Several additional system transients have been calculated for the 5 kW(e) TE system and are reported in this document. They include a startup transient with a reactivity rate of 0.005 cents/sec, several startup accidents, a step reactivity insertion at full power and a loss of electrical load. These data are intended for input to system design analyses and for possible use in the protected accident section of the safety report. (U.S.)

Reproduction of European eel jeopardised by high levels of dioxins and dioxin-like PCBs?

Science.gov (United States)

Geeraerts, C; Focant, J-F; Eppe, G; De Pauw, E; Belpaire, C

2011-09-01

Dioxins, furans and dioxin-like polychlorinated biphenyls (PCBs) were analysed in muscle tissue from yellow phased European eel (Anguilla anguilla) from 38 sites in Belgium. Dioxin concentrations in eel vary considerably between sampling locations, indicating that yellow eel is a good indicator of local pollution levels. Measured levels of dioxin-like PCBs are much higher than those of the dioxins and furans. In the majority of the sites, eel has levels considered to be detrimental for their reproduction. Field levels of dioxin and dioxin-like PCBs are therefore suggested as an additional causal factor contributing to the decline of the European eel. 42% of the sampling sites show especially dioxin-like PCB levels exceeding the European consumption level (with a factor 3 on average). Human consumption of eel, especially in these highly contaminated sites, seems unjustified. Copyright © 2011 Elsevier B.V. All rights reserved.

76 FR 24831 - Site-Specific Analyses for Demonstrating Compliance With Subpart C Performance Objectives

Science.gov (United States)

2011-05-03

...-level radioactive waste disposal facilities to conduct site-specific analyses to demonstrate compliance... public health and safety, these amendments would enhance the safe disposal of low-level radioactive waste... would be to enhance the safe disposal of low-level radioactive waste. The NRC is also proposing...

VALUE-ADDITION FOR EMPOWERMENT AND EMPLOYABILITY THROUGH INTERVENTION OF ODL MODE OF IGNOU

Directory of Open Access Journals (Sweden)

S. KISHORE,

2013-01-01

Full Text Available In the developing country like India, the output of graduates from higher educational institutions is high. But, the major concern is that majority of graduates are not employable, especially from rural areas for want of skills expected by the employer. The soft skills, communication skills and multidisciplinary knowledge are essential to become employable. In this context, the short-term six months courses of Indira Gandhi National Open University (IGNOU delivered through the ODL mode is an alternative intervention to the graduates towards empowerment. This article analyses the benefits of self-learning though ODL mode of IGNOU. The IGNOU Regional Centre, Madurai has made a pilot attempt in enrolling formal mode college going students in a few specific certificate programmes of IGNOU for enrichment and empowerment. The certificate level programmes of IGNOU which match the discipline of study at the graduation level as a value added course are also explored in this work. Self-study through ODL promotes the many skills and builds confidence to link learning to real-life situations and as well as ability to understand the changing demands in the world of work. Also, ability to manage information is a significant dimension of self-learning. Thus, the short-term programmes of IGNOU extend value-addition to the graduates in the form of transferable skills and the value-added outputs are expected to be employable or self-employable, thus contributing to the growth of the nation. Open learning; self-learning; skills; value-addition; empowerment; employability.

THE ANALYSE OF THE REGULATIONS AT THE EUROPEAN LEVEL REGARDING CARTELS. CASE SUDY: CARTEL BETWEEN THE COMPANIES CHIQUITA AND PACIFIC

Directory of Open Access Journals (Sweden)

Berinde Mihai

2012-07-01

Full Text Available The present paper tries to make an analyse of the policy in the field of competition, at the level of the European Union, more exactly the policy applied on cartels. It is important to know the regulations regarding cartels, especially the way in which procedures are done in the case of a cartel. Cartels have a negative impact on competition and consumers, and that’s why it is extremely important that they are discovered on time and after that, by using correction measures to try to recuperate the created damage. The used research method is the analyze of the legislation in force regarding cartels and the study of the existing literature in this field, and in order to give an example of the procedures in the case of a cartel, we analyzed the cartel between two companies Chiquita and Pacific. It is extremely important for these regulations to be known, and in order to discourage such practices, the European Committee has thought of a series of advantages for the companies that give information and evidence regarding the existence of a cartel. Among these advantages we could mention immunity to fine, that permits the company to be absolved of all its fines. The paper presents schematically the legislation that forbids anti-competitive practices, at the level of the European Union, and after that the applied procedure when a law violation is discovered. The modality in which the procedures are applied, in the case of suspecting a cartel, have been presented step by step, and after that, the case study does not exist only to give an example of procedures, but also to present the applied methods, in the case of success in proving the existence of a cartel. The importance of competition policy at a European level cannot be denied because of the fact that only by implementing of a proper policy in this field, an economy can develop further.

Radiation physics and shielding codes and analyses applied to design-assist and safety analyses of CANDUR and ACRTM reactors

International Nuclear Information System (INIS)

Aydogdu, K.; Boss, C. R.

2006-01-01

This paper discusses the radiation physics and shielding codes and analyses applied in the design of CANDU and ACR reactors. The focus is on the types of analyses undertaken rather than the inputs supplied to the engineering disciplines. Nevertheless, the discussion does show how these analyses contribute to the engineering design. Analyses in radiation physics and shielding can be categorized as either design-assist or safety and licensing (accident) analyses. Many of the analyses undertaken are designated 'design-assist' where the analyses are used to generate recommendations that directly influence plant design. These recommendations are directed at mitigating or reducing the radiation hazard of the nuclear power plant with engineered systems and components. Thus the analyses serve a primary safety function by ensuring the plant can be operated with acceptable radiation hazards to the workers and public. In addition to this role of design assist, radiation physics and shielding codes are also deployed in safety and licensing assessments of the consequences of radioactive releases of gaseous and liquid effluents during normal operation and gaseous effluents following accidents. In the latter category, the final consequences of accident sequences, expressed in terms of radiation dose to members of the public, and inputs to accident analysis, e.g., decay heat in fuel following a loss-of-coolant accident, are also calculated. Another role of the analyses is to demonstrate that the design of the plant satisfies the principle of ALARA (as low as reasonably achievable) radiation doses. This principle is applied throughout the design process to minimize worker and public doses. The principle of ALARA is an inherent part of all design-assist recommendations and safety and licensing assessments. The main focus of an ALARA exercise at the design stage is to minimize the radiation hazards at the source. This exploits material selection and impurity specifications and relies

Analysing Old Testament poetry: Basic issues in contemporary exegesis

Directory of Open Access Journals (Sweden)

G. T. M. Prinsloo

1991-08-01

Full Text Available The wealth of publications on matters relating to Old Testament poetry is witness to the fact that this subject has become a focal point in Old Testament studies. In this paper, an overview of contemporary publications is given. The basic issues, both on the level of poetic theory and practical application, are pointed out. A tendency towards a comprehensive literary approach is definitely present and should be encouraged. Only when a poem is analysed on all levels and by all means, will the richness of its meaning be appreciated.

Value added structures and coordination structures of the decentral power generation. An actor-centered and institution-centered analyses by means of selected case examples; Wertschoepfungs- und Koordinationsstrukturen der dezentralen Stromerzeugung. Eine akteur- und institutionenzentrierte Analyse anhand ausgewaehlter Fallbeispiele

Energy Technology Data Exchange (ETDEWEB)

Brocke, Tobias

2012-07-01

Against the background of energy policy and climate policy decisions, the decentralized power generation has gained in importance in Germany. Previous research activities on this topic mostly concerned with technical, legal, environmental and economic issues as well as potential analyses for certain forms of power generation. In contrast, the contribution under consideration deals with the organizational structures and governance structures of the decentralized power generation at local and regional level. In particular, it concerns the question to what extent the decentralized power generation results in the formation of localized production connections. In addition, it is about the importance of institutional framework as well as the role of regulatory, political and civil society actors who are affected by the distributed power generation.

Additive Construction with Mobile Emplacement (ACME)

Science.gov (United States)

Vickers, John

2015-01-01

The Additive Construction with Mobile Emplacement (ACME) project is developing technology to build structures on planetary surfaces using in-situ resources. The project focuses on the construction of both 2D (landing pads, roads, and structure foundations) and 3D (habitats, garages, radiation shelters, and other structures) infrastructure needs for planetary surface missions. The ACME project seeks to raise the Technology Readiness Level (TRL) of two components needed for planetary surface habitation and exploration: 3D additive construction (e.g., contour crafting), and excavation and handling technologies (to effectively and continuously produce in-situ feedstock). Additionally, the ACME project supports the research and development of new materials for planetary surface construction, with the goal of reducing the amount of material to be launched from Earth.

Proteomic and transcriptomic analyses of fecundity in the brown planthopper Nilaparvata lugens (Stål).

Science.gov (United States)

Zhai, Yifan; Zhang, Jianqing; Sun, Zhongxiang; Dong, Xiaolin; He, Yuan; Kang, Kui; Liu, Zhichao; Zhang, Wenqing

2013-11-01

As an r-strategy insect species, the brown planthopper (BPH) Nilaparvata lugens (Stål) is a serious pest of rice crops in the temperate and tropical regions of Asia and Australia, which may be due to its robust fecundity. Here we combined 2-DE comparative proteomic and RNA-seq transcriptomic analyses to identify fecundity-related proteins and genes. Using high- and low-fecundity populations as sample groups, a total of 54 and 75 proteins were significantly altered in the third and sixth day brachypterous female stages, respectively, and 39 and 54 of these proteins were identified by MALDI-TOF/TOF MS. In addition, 71,966 unigenes were quantified by Illumina sequencing. On the basis of the transcriptomic analysis, 7408 and 1639 unigenes demonstrated higher expression levels in the high-fecundity population in the second day brachypterous female adults and the second day fifth instar nymphs, respectively, and 411 unigenes were up-regulated in both groups. Of these dozens of proteins and thousands of unigenes, five were differentially expressed at both the protein and mRNA levels at all four time points, suggesting that these genes may regulate fecundity. Glutamine synthetase (GS) was chosen for further functional studies. RNAi knockdown of the GS gene reduced the fecundity of N. lugens by 64.6%, disrupted ovary development, and inhibited vitellogenin (Vg) expression. Our results show that a combination of proteomic and transcriptomic analyses provided five candidate proteins and genes for further study. The knowledge gained from this study may lead to a more fundamental understanding of the fecundity of this important agricultural insect pest.

A new Link for Geographic analyses of Inventory Data

Science.gov (United States)

David Reed; Kurt Pregitzer; Scott A. Pugh; Patrick D. Miles

2001-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA)data are widely used throughout the United States for analyses of forest status and trends, landscape-level forest composition, and other forest characteristics. A new software product, FIAMODEL, is available for analyzing FIA data within the ArcView? (ESRI, Inc.)geographic information system. The software...

ExSTA: External Standard Addition Method for Accurate High-Throughput Quantitation in Targeted Proteomics Experiments.

Science.gov (United States)

Mohammed, Yassene; Pan, Jingxi; Zhang, Suping; Han, Jun; Borchers, Christoph H

2018-03-01

Targeted proteomics using MRM with stable-isotope-labeled internal-standard (SIS) peptides is the current method of choice for protein quantitation in complex biological matrices. Better quantitation can be achieved with the internal standard-addition method, where successive increments of synthesized natural form (NAT) of the endogenous analyte are added to each sample, a response curve is generated, and the endogenous concentration is determined at the x-intercept. Internal NAT-addition, however, requires multiple analyses of each sample, resulting in increased sample consumption and analysis time. To compare the following three methods, an MRM assay for 34 high-to-moderate abundance human plasma proteins is used: classical internal SIS-addition, internal NAT-addition, and external NAT-addition-generated in buffer using NAT and SIS peptides. Using endogenous-free chicken plasma, the accuracy is also evaluated. The internal NAT-addition outperforms the other two in precision and accuracy. However, the curves derived by internal vs. external NAT-addition differ by only ≈3.8% in slope, providing comparable accuracies and precision with good CV values. While the internal NAT-addition method may be "ideal", this new external NAT-addition can be used to determine the concentration of high-to-moderate abundance endogenous plasma proteins, providing a robust and cost-effective alternative for clinical analyses or other high-throughput applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Europe at the frontline: analysing street-level motivations for the use of European Union migration law

NARCIS (Netherlands)

Dörrenbächer, N.

2017-01-01

This contribution investigates what motivates the use of European Union (EU) law at the street level of migration law implementation. The street level is a crucial venue for EU implementation because lower-level implementers critically influence the level of EU compliance eventually achieved.

Project W-320 SAR and process control thermal analyses

International Nuclear Information System (INIS)

Sathyanarayana, K.

1997-01-01

This report summarizes the results of thermal hydraulic computer modeling supporting Project W-320 for process control and SAR documentation. Parametric analyses were performed for the maximum steady state waste temperature. The parameters included heat load distribution, tank heat load, fluffing factor and thermal conductivity. Uncertainties in the fluffing factor and heat load distribution had the largest effect on maximum waste temperature. Safety analyses were performed for off normal events including loss of ventilation, loss of evaporation and loss of secondary chiller. The loss of both the primary and secondary ventilation was found to be the most limiting event with saturation temperature in the bottom waste reaching in just over 30 days. An evaluation was performed for the potential lowering of the supernatant level in tank 241-AY-102. The evaluation included a loss of ventilation and steam bump analysis. The reduced supernatant level decreased the time to reach saturation temperature in the waste for the loss of ventilation by about one week. However, the consequence of a steam bump were dramatically reduced

The Impact of Wine Style and Sugar Addition in liqueur d’expedition (dosage Solutions on Traditional Method Sparkling Wine Composition

Directory of Open Access Journals (Sweden)

Belinda Kemp

2017-01-01

Full Text Available The purpose of this study was to investigate the effect of wine style and cane sugar addition in the liqueur d’expedition (dosage solution on volatile aroma compounds (VOCs in traditional method sparkling wine. There were 24 bottles of each treatment produced. Treatments were sparkling wine zero dosage (ZD; NV sparkling wine + sugar (BS; unoaked still Chardonnay wine + sugar (UC; Pinot noir 2009 sparkling wine + sugar (PN; Niagara produced Brandy + sugar (B and Icewine (IW. The control treatment in the sensory analysis was an oaked still Chardonnay wine + sugar (OC because the zero-dosage wine was not suitable for a difference test that compared wines with sugar to one without. Standard wine chemical parameters were analysed before disgorging and after liqueur d’expedition was added and included; pH, titratable acidity (TA g/L, alcohol (v/v %, residual sugar (RS g/L, free and total SO2 and total phenolics (A.U.. Volatile aroma compounds (VOCs analysed by Headspace Solid- Phase Micro-Extraction Gas Chromatography-Mass Spectrometry (HS-SPME-GC-MS included two alcohols, and six ethyl esters. ZD wines had the highest foam height and highest dissolved oxygen level. Sugar affected VOC concentrations in all treatments at five weeks post-disgorging, but by 15 weeks after liqueur d’expedition addition, the wine with added sugar had similar VOC concentrations to the ZD wines. The type of wines used in the dosage solutions had more influence on VOC concentrations than sugar addition.

Levels, trends and determinants of organohalogen compounds in breast milk in the netherlands

Energy Technology Data Exchange (ETDEWEB)

Houweling, D. A.; Steentjes, G. M.; Van Dekken, A.; Baumann, R. A.; Hoogerbrugge, R.; Zeilmaker, M. J.

2002-07-01

Since 1968, human milk surveys have been performed in the Netherlands at five year intervals to study trends in human exposure to polychlorinated organic compounds (POCs). From 1988 onwards dioxin-like congeners were analysed. The most recent campaign was carried out in 1998. In the campaign of 1998, in addition to the levels and trends of POCs in breast milk, potential determinants of the levels of POXCs in breast milk (such as the age of the mother, body mass index (BMI) of the mother, smoking behaviour and dietary habits) were also studied. Previously we presented preliminary results of the analysis of 36 breast milk samples. here we present the results of the analysis of 193 breast milk samples and the analysis of potential determinants of POC levels in breast milk. (Author) 8 refs.

Analyses of systems availability and operator actions to support the development of severe accident procedures

International Nuclear Information System (INIS)

Lutz, R.J. Jr.; Scobel, J.H.

1989-01-01

This paper reports on traditional analyses of severe accidents, such as those presented in Probabilistic Risk Assessment (PRA) studies of nuclear power stations, that have generally been performed on the assumption that all means of cooling the reactor core are lost and that no operator actions to mitigate the consequences or progression of the severe accident are performed. The assumption to neglect the availability of safety systems and operator actions which do not prevent core melting can lead to erroneous conclusions regarding the plant severer accident profile. Recent work in severe accident management has identified the need to perform analyses which consider all systems availabilities and operator actions, irrespective of their contribution to the prevention of core melting. These new analyses indicate that the traditional analyses result in overfly pessimistic predictions of the time of core melting and the subsequent potential for recovery of core cooling prior to core melting. Additionally, since the traditional analyses do not model all of the operator actions which are prescribed, the impact of additional severe accident operator actions on the progression and consequences of the accident cannot be reliably identified. Further, the more detailed analysis can change the focus of the importance of various system to the prevention of core damage and the mitigation of severe accident consequences. Finally, the simplicity of the traditional analyses can have a considerable impact on severe accident decision making, particularly in the evaluation of alternate plant design features and the priorities for research studies

Immigration and Firm Performance: a city-level approach

Directory of Open Access Journals (Sweden)

Mercedes Teruel Carrizosa

2009-10-01

Full Text Available This article analyses the effect of immigration flows on the growthand efficiency of manufacturing firms in Spanish cities. While most studies werefocusing on the effect immigrants have on labour markets at an aggregate level,here, we argue that the impact of immigration on firm performance should not onlybe considered in terms of the labour market, but also in terms of how city’s amenitiescan affect the performance of firms. Implementing a panel data methodology,we show that the immigrants’ increasing pressure has a positive effect on labourproductivity and wages and a negative effect on the job evolution of these manufacturingfirms. In addition, both small and new firms are more sensitive to thepressures of immigrant inflow, while foreign market oriented firms report higherproductivity levels and a less marked impact of immigration than their counterparts.We also present a set of instruments to control for endogeneity. It allows us toconfirm the effect of local immigration flows on the performance of manufacturingfirms.

Safety analyses for high-temperature reactors

International Nuclear Information System (INIS)

Mueller, A.

1978-01-01

The safety evaluation of HTRs may be based on the three methods presented here: The licensing procedure, the probabilistic risk analysis, and the damage extent analysis. Thereby all safety aspects - from normal operation to the extreme (hypothetical) accidents - of the HTR are covered. The analyses within the licensing procedure of the HTR-1160 have shown that for normal operation and for the design basis accidents the radiation exposures remain clearly below the maximum permissible levels as prescribed by the radiation protection ordinance, so that no real hazard for the population will avise from them. (orig./RW) [de

Multidisciplinary Geo-scientific Hazard Analyses: Istanbul Microzonation Projects

Science.gov (United States)

Kara, Sema; Baş, Mahmut; Kılıç, Osman; Tarih, Ahmet; Yahya Menteşe, Emin; Duran, Kemal

2017-04-01

Istanbul (Turkey) is located on the west edge of North Anatolia Fault and hence is an earthquake prone city with a population that exceeds 15 million people. In addition, the city is still growing as center of commerce, tourism and culture that increases the exposure more and more. During the last decade, although Istanbul grew faster than ever in its history, precautions against a possible earthquake have also increased steadily. The two big earthquakes (in Kocaeli and Duzce Provinces) occurred in 1999 alongside Istanbul and these events became the trigger events that accelerated the disaster risk reduction activities in Istanbul. Following a loss estimation study carried out by Japanese International Cooperation Agency (JICA) in 2001 and Istanbul Earthquake Master Plan prepared by four major universities' researchers in 2003; it was evaluated that understanding and analyzing the geological structure in Istanbul was the main concern. Thereafter Istanbul Metropolitan Municipality's Directorate of Earthquake and Ground Research (DEGRE) carried out two major geo-scientific studies called "microzonation studies" covering 650 km2 of Istanbul's urbanized areas between 2006 and 2009. The studies were called "microzonation" because the analysis resolution was as dense as 250m grids and included various assessments on hazards such as ground shaking, liquefaction, karstification, landslide, flooding, and surface faulting. After the evaluation of geological, geotechnical and geophysical measurements; Earthquake and Tsunami Hazard Maps for all Istanbul, slope, engineering geology, ground water level, faulting, ground shaking, inundation, shear wave velocity and soil classification maps for the project areas were obtained. In the end "Land Suitability Maps" are derived from the combination of inputs using multi-hazard approach. As a result, microzonation is tool for risk oriented urban planning; consisting of interdisciplinary multi-hazard risk analyses. The outputs of

Relations of serum phosphorus and calcium levels to the incidence of cardiovascular disease in the community.

Science.gov (United States)

Dhingra, Ravi; Sullivan, Lisa M; Fox, Caroline S; Wang, Thomas J; D'Agostino, Ralph B; Gaziano, J Michael; Vasan, Ramachandran S

2007-05-14

Higher levels of serum phosphorus and the calcium-phosphorus product are associated with increased mortality from cardiovascular disease (CVD) in patients with chronic kidney disease (CKD) or prior CVD. However, it is unknown if serum phosphorus levels influence vascular risk in individuals without CKD or CVD. We prospectively evaluated 3368 Framingham Offspring study participants (mean age, 44 years; 51% were women) free of CVD and CKD. We used multivariable Cox models to relate serum phosphorus and calcium levels to CVD incidence. On follow-up (mean duration, 16.1 years), there were 524 incident CVD events (159 in women). In multivariable analyses and adjusting for established risk factors and additionally for glomerular filtration rate and for hemoglobin, serum albumin, proteinuria, and C-reactive protein levels, a higher level of serum phosphorus was associated with an increased CVD risk in a continuous fashion (adjusted hazard ratio per increment of milligrams per deciliter, 1.31; 95% confidence interval, 1.05-1.63; P=.02; P value for trend across quartiles = .004). Individuals in the highest serum phosphorus quartile experienced a multivariable-adjusted 1.55-fold CVD risk (95% confidence interval, 1.16%-2.07%; P=.004) compared with those in the lowest quartile. These findings remained robust in time-dependent models that updated CVD risk factors every 4 years and in analyses restricted to individuals without proteinuria and an estimated glomerular filtration rate greater than 90 mL/min per 1.73 m(2). Serum calcium was not related to CVD risk. Higher serum phosphorus levels are associated with an increased CVD risk in individuals free of CKD and CVD in the community. These observations emphasize the need for additional research to elucidate the potential link between phosphorus homeostasis and vascular risk.

Secondary scintillation yield of xenon with sub-percent levels of CO2 additive for rare-event detection

Science.gov (United States)

Henriques, C. A. O.; Freitas, E. D. C.; Azevedo, C. D. R.; González-Díaz, D.; Mano, R. D. P.; Jorge, M. R.; Fernandes, L. M. P.; Monteiro, C. M. B.; Gómez-Cadenas, J. J.; Álvarez, V.; Benlloch-Rodríguez, J. M.; Borges, F. I. G. M.; Botas, A.; Cárcel, S.; Carríon, J. V.; Cebrían, S.; Conde, C. A. N.; Díaz, J.; Diesburg, M.; Esteve, R.; Felkai, R.; Ferrario, P.; Ferreira, A. L.; Goldschmidt, A.; Gutiérrez, R. M.; Hauptman, J.; Hernandez, A. I.; Hernando Morata, J. A.; Herrero, V.; Jones, B. J. P.; Labarga, L.; Laing, A.; Lebrun, P.; Liubarsky, I.; López-March, N.; Losada, M.; Martín-Albo, J.; Martínez-Lema, G.; Martínez, A.; McDonald, A. D.; Monrabal, F.; Mora, F. J.; Moutinho, L. M.; Muñoz Vidal, J.; Musti, M.; Nebot-Guinot, M.; Novella, P.; Nygren, D. R.; Palmeiro, B.; Para, A.; Pérez, J.; Querol, M.; Renner, J.; Ripoll, L.; Rodríguez, J.; Rogers, L.; Santos, F. P.; dos Santos, J. M. F.; Simón, A.; Sofka, C.; Sorel, M.; Stiegler, T.; Toledo, J. F.; Torrent, J.; Tsamalaidze, Z.; Veloso, J. F. C. A.; Webb, R.; White, J. T.; Yahlali, N.; NEXT Collaboration

2017-10-01

Xe-CO2 mixtures are important alternatives to pure xenon in Time Projection Chambers (TPC) based on secondary scintillation (electroluminescence) signal amplification with applications in the important field of rare event detection such as directional dark matter, double electron capture and double beta decay detection. The addition of CO2 to pure xenon at the level of 0.05-0.1% can reduce significantly the scale of electron diffusion from 10 mm /√{m} to 2.5 mm /√{m}, with high impact on the discrimination efficiency of the events through pattern recognition of the topology of primary ionization trails. We have measured the electroluminescence (EL) yield of Xe-CO2 mixtures, with sub-percent CO2 concentrations. We demonstrate that the EL production is still high in these mixtures, 70% and 35% relative to that produced in pure xenon, for CO2 concentrations around 0.05% and 0.1%, respectively. The contribution of the statistical fluctuations in EL production to the energy resolution increases with increasing CO2 concentration, being smaller than the contribution of the Fano factor for concentrations below 0.1% CO2.

Food additives and preschool children.

Science.gov (United States)

Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

2013-02-01

Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

Using waste plastic bottles as additive for stone mastic asphalt

International Nuclear Information System (INIS)

Ahmadinia, Esmaeil; Zargar, Majid; Karim, Mohamed Rehan; Abdelaziz, Mahrez; Shafigh, Payam

2011-01-01

Highlights: → The PET increased the stiffness level of the mixture improving its resistance level against permanent deformation. → The effects of waste PET on Marshall Stability, air void and bulk specific gravity of the mixture are significant. → The appropriate amount of PET was found to be 6% by weight of bitumen. -- Abstract: Currently, polymer modified asphalt mixture is a relatively costly mixture for paving roads. One way to reduce the cost of such constructions and rendering them more convenient is by using inexpensive polymers, i.e. waste polymers. The main purpose of this research is to determine the effect of incorporating waste plastic bottles (Polyethylene Terephthalate (PET)) on the engineering properties of stone mastic asphalt (SMA) mixture. The volumetric and mechanical properties of asphalt mixes that include various percentages of PET (0%, 2%, 4%, 6%, 8% and 10%) were calculated and assessed with laboratory tests. The appropriate amount of PET was found to be 6% by weight of bitumen. The outcomes were statistically analysed and the determination of the significance at certain confidence limits was performed with the two factor variance analysis (ANOVA). Moreover, some studies conducted on polyethylene modified asphalt mixture have also been taken into consideration in this paper. The results show that the addition of PET has a significant positive effect on the properties of SMA and it can promote the re-use of waste material in industry in an environmentally friendly and economical way.

Impacts of representing sea-level rise uncertainty on future flood risks: An example from San Francisco Bay.

Science.gov (United States)

Ruckert, Kelsey L; Oddo, Perry C; Keller, Klaus

2017-01-01

Rising sea levels increase the probability of future coastal flooding. Many decision-makers use risk analyses to inform the design of sea-level rise (SLR) adaptation strategies. These analyses are often silent on potentially relevant uncertainties. For example, some previous risk analyses use the expected, best, or large quantile (i.e., 90%) estimate of future SLR. Here, we use a case study to quantify and illustrate how neglecting SLR uncertainties can bias risk projections. Specifically, we focus on the future 100-yr (1% annual exceedance probability) coastal flood height (storm surge including SLR) in the year 2100 in the San Francisco Bay area. We find that accounting for uncertainty in future SLR increases the return level (the height associated with a probability of occurrence) by half a meter from roughly 2.2 to 2.7 m, compared to using the mean sea-level projection. Accounting for this uncertainty also changes the shape of the relationship between the return period (the inverse probability that an event of interest will occur) and the return level. For instance, incorporating uncertainties shortens the return period associated with the 2.2 m return level from a 100-yr to roughly a 7-yr return period (∼15% probability). Additionally, accounting for this uncertainty doubles the area at risk of flooding (the area to be flooded under a certain height; e.g., the 100-yr flood height) in San Francisco. These results indicate that the method of accounting for future SLR can have considerable impacts on the design of flood risk management strategies.

Impacts of representing sea-level rise uncertainty on future flood risks: An example from San Francisco Bay.

Directory of Open Access Journals (Sweden)

Kelsey L Ruckert

Full Text Available Rising sea levels increase the probability of future coastal flooding. Many decision-makers use risk analyses to inform the design of sea-level rise (SLR adaptation strategies. These analyses are often silent on potentially relevant uncertainties. For example, some previous risk analyses use the expected, best, or large quantile (i.e., 90% estimate of future SLR. Here, we use a case study to quantify and illustrate how neglecting SLR uncertainties can bias risk projections. Specifically, we focus on the future 100-yr (1% annual exceedance probability coastal flood height (storm surge including SLR in the year 2100 in the San Francisco Bay area. We find that accounting for uncertainty in future SLR increases the return level (the height associated with a probability of occurrence by half a meter from roughly 2.2 to 2.7 m, compared to using the mean sea-level projection. Accounting for this uncertainty also changes the shape of the relationship between the return period (the inverse probability that an event of interest will occur and the return level. For instance, incorporating uncertainties shortens the return period associated with the 2.2 m return level from a 100-yr to roughly a 7-yr return period (∼15% probability. Additionally, accounting for this uncertainty doubles the area at risk of flooding (the area to be flooded under a certain height; e.g., the 100-yr flood height in San Francisco. These results indicate that the method of accounting for future SLR can have considerable impacts on the design of flood risk management strategies.

Influence of lead oxide addition on LnTiTaO6 (Ln = Ce, Pr and Nd ...

Indian Academy of Sciences (India)

The crystal structure of the materials was analysed using X-ray diffraction techniques and the sur- face morphology of the sintered samples was analysed using scanning electron microscopy. The dielectric constant at microwave frequency range decreases for higher PbO addition for all the samples but the quality factor ...

Contour plot assessment of existing meta-analyses confirms robust association of statin use and acute kidney injury risk.

Science.gov (United States)

Chevance, Aurélie; Schuster, Tibor; Steele, Russell; Ternès, Nils; Platt, Robert W

2015-10-01

Robustness of an existing meta-analysis can justify decisions on whether to conduct an additional study addressing the same research question. We illustrate the graphical assessment of the potential impact of an additional study on an existing meta-analysis using published data on statin use and the risk of acute kidney injury. A previously proposed graphical augmentation approach is used to assess the sensitivity of the current test and heterogeneity statistics extracted from existing meta-analysis data. In addition, we extended the graphical augmentation approach to assess potential changes in the pooled effect estimate after updating a current meta-analysis and applied the three graphical contour definitions to data from meta-analyses on statin use and acute kidney injury risk. In the considered example data, the pooled effect estimates and heterogeneity indices demonstrated to be considerably robust to the addition of a future study. Supportingly, for some previously inconclusive meta-analyses, a study update might yield statistically significant kidney injury risk increase associated with higher statin exposure. The illustrated contour approach should become a standard tool for the assessment of the robustness of meta-analyses. It can guide decisions on whether to conduct additional studies addressing a relevant research question. Copyright © 2015 Elsevier Inc. All rights reserved.

Analysing organic transistors based on interface approximation

International Nuclear Information System (INIS)

Akiyama, Yuto; Mori, Takehiko

2014-01-01

Temperature-dependent characteristics of organic transistors are analysed thoroughly using interface approximation. In contrast to amorphous silicon transistors, it is characteristic of organic transistors that the accumulation layer is concentrated on the first monolayer, and it is appropriate to consider interface charge rather than band bending. On the basis of this model, observed characteristics of hexamethylenetetrathiafulvalene (HMTTF) and dibenzotetrathiafulvalene (DBTTF) transistors with various surface treatments are analysed, and the trap distribution is extracted. In turn, starting from a simple exponential distribution, we can reproduce the temperature-dependent transistor characteristics as well as the gate voltage dependence of the activation energy, so we can investigate various aspects of organic transistors self-consistently under the interface approximation. Small deviation from such an ideal transistor operation is discussed assuming the presence of an energetically discrete trap level, which leads to a hump in the transfer characteristics. The contact resistance is estimated by measuring the transfer characteristics up to the linear region

Functional and community-level soil microbial responses to zinc addition may depend on test system biocomplexity.

Science.gov (United States)

Sverdrup, Line E; Linjordet, Roar; Strømman, Gjermund; Hagen, Snorre B; van Gestel, Cornelis A M; Frostegård, Sa; Sørheim, Roald

2006-12-01

The effect of zinc on soil nitrification and composition of the microbial community in soil was investigated using a full factorial experiment with five zinc concentrations and four levels of biological complexity (microbes only, microbes and earthworms (Eisenia fetida), microbes and Italian ryegrass (Lolium multiflorum var. Macho), and microbes, ryegrass and earthworms). After 6 weeks of exposure, the activity of soil nitrifying bacteria was measured and the microbial community structure was characterized by phospholipid fatty acid (PLFA) analysis. Soil nitrification and several PLFA markers were significantly influenced by either zinc addition and/or the presence of earthworms or ryegrass, and one of the most pronounced changes was the increase of fungi and decrease of bacteria with increasing concentrations of zinc. Of particular interest, however, was the potential interaction between the presence of plants and/or earthworms and the effect of zinc, which the factorial study design allowed us to explore. Such an effect was observed in two cases: Earthworms reduced the positive effect of zinc on the fungal biomass (ANOVA, p=0.03), and the effect of earthworms on the soil nitrification activity depended on zinc concentration (ANOVA, p<0.05). The effect of earthworm presence was not very large, but it does show that multispecies tests might give information about metal toxicity or bioavailability that cannot be predicted from single-species tests.

Methodology for Analysing Controllability and Observability of Bladed Disc Coupled Vibrations

DEFF Research Database (Denmark)

Christensen, Rene Hardam; Santos, Ilmar

2004-01-01

to place sensors and actuators so that all vibration levels can be monitored and controlled. Due to the special dynamic characteristics of rotating coupled bladed discs, where disc lateral motion is coupled to blade flexible motion, such analyses become quite complicated. The dynamics is described...... by a time-variant mathematical model, which presents parametric vibration modes and centrifugal stiffening effects resulting in increasing blade natural frequencies. In this framework the objective and contribution of this paper is to present a methodology for analysing the modal controllability...

Why weight? Modelling sample and observational level variability improves power in RNA-seq analyses.

Science.gov (United States)

Liu, Ruijie; Holik, Aliaksei Z; Su, Shian; Jansz, Natasha; Chen, Kelan; Leong, Huei San; Blewitt, Marnie E; Asselin-Labat, Marie-Liesse; Smyth, Gordon K; Ritchie, Matthew E

2015-09-03

Variations in sample quality are frequently encountered in small RNA-sequencing experiments, and pose a major challenge in a differential expression analysis. Removal of high variation samples reduces noise, but at a cost of reducing power, thus limiting our ability to detect biologically meaningful changes. Similarly, retaining these samples in the analysis may not reveal any statistically significant changes due to the higher noise level. A compromise is to use all available data, but to down-weight the observations from more variable samples. We describe a statistical approach that facilitates this by modelling heterogeneity at both the sample and observational levels as part of the differential expression analysis. At the sample level this is achieved by fitting a log-linear variance model that includes common sample-specific or group-specific parameters that are shared between genes. The estimated sample variance factors are then converted to weights and combined with observational level weights obtained from the mean-variance relationship of the log-counts-per-million using 'voom'. A comprehensive analysis involving both simulations and experimental RNA-sequencing data demonstrates that this strategy leads to a universally more powerful analysis and fewer false discoveries when compared to conventional approaches. This methodology has wide application and is implemented in the open-source 'limma' package. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Nuclear level density

International Nuclear Information System (INIS)

Cardoso Junior, J.L.

1982-10-01

Experimental data show that the number of nuclear states increases rapidly with increasing excitation energy. The properties of highly excited nuclei are important for many nuclear reactions, mainly those that go via processes of the compound nucleus type. In this case, it is sufficient to know the statistical properties of the nuclear levels. First of them is the function of nuclear levels density. Several theoretical models which describe the level density are presented. The statistical mechanics and a quantum mechanics formalisms as well as semi-empirical results are analysed and discussed. (Author) [pt

Rheological parameters of dough with inulin addition and its effect on bread quality

Science.gov (United States)

Bojnanska, T.; Tokar, M.; Vollmannova, A.

2015-04-01

The rheological properties of enriched flour prepared with an addition of inulin were studied. The addition of inulin caused changes of the rheological parameters of the recorder curve. 10% and more addition significantly extended development time and on the farinogram were two peaks of consistency, what is a non-standard shape. With increasing addition of inulin resistance to deformation grows and dough is difficult to process, over 15% addition make dough short and unsuitable for making bread. Bread volume, the most important parameter, significantly decreased with inulin addition. Our results suggest a level of 5% inulin to produce a functional bread of high sensory acceptance and a level of 10% inulin produce a bread of satisfactory sensory acceptance. Bread with a level over 10% of inulin was unsatisfactory.

Integrated Waste Treatment Unit (IWTU) Input Coal Analyses and Off-Gass Filter (OGF) Content Analyses

Energy Technology Data Exchange (ETDEWEB)

Jantzen, Carol M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Missimer, David M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Guenther, Chris P. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Shekhawat, Dushyant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); VanEssendelft, Dirk T. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Means, Nicholas C. [AECOM Technology Corp., Oak Ridge, TN (United States)

2015-04-23

in process piping and materials, in excessive off-gas absorbent loading, and in undesired process emissions. The ash content of the coal is important as the ash adds to the DMR and other vessel products which affect the final waste product mass and composition. The amount and composition of the ash also affects the reaction kinetics. Thus ash content and composition contributes to the mass balance. In addition, sodium, potassium, calcium, sulfur, and maybe silica and alumina in the ash may contribute to wall-scale formation. Sodium, potassium, and alumina in the ash will be overwhelmed by the sodium, potassium, and alumina from the feed but the impact from the other ash components needs to be quantified. A maximum coal particle size is specified so the feed system does not plug and a minimum particle size is specified to prevent excess elutriation from the DMR to the Process Gas Filter (PGF). A vendor specification was used to procure the calcined coal for IWTU processing. While the vendor supplied a composite analysis for the 22 tons of coal (Appendix A), this study compares independent analyses of the coal performed at the Savannah River National Laboratory (SRNL) and at the National Energy Technology Laboratory (NETL). Three supersacks a were sampled at three different heights within the sack in order to determine within bag variability and between bag variability of the coal. These analyses were also compared to the vendor’s composite analyses and to the coal specification. These analyses were also compared to historic data on Bestac coal analyses that had been performed at Hazen Research Inc. (HRI) between 2004-2011.

Finding phosphorus containing additives in manufactured foods

OpenAIRE

Lloyd, Lyn; Gillanders, Lyn

2012-01-01

Dietary phosphorous (P) intake is associated with an increased serum phosphate level which is a risk factor for cardiovascular disease and increased mortality for people with chronic kidney disease. Dietary restriction of P is an important nutrition intervention as about 50% of daily intake of P is from P–containing food additives. Educating patients on P additives can effectively reduce serum P values over standard care. Avoidance can be achieved by reading the ingredient list to check for o...

The addition of inulin and Lactobacillus casei 01 in sheep milk ice cream.

Science.gov (United States)

Balthazar, Celso F; Silva, Hugo L A; Esmerino, Erick A; Rocha, Ramon S; Moraes, Jeremias; Carmo, Mariana A V; Azevedo, Luciana; Camps, Ihosvany; K D Abud, Yuri; Sant'Anna, Celso; Franco, Robson M; Freitas, Mônica Q; Silva, Marcia C; Raices, Renata S L; Escher, Graziela B; Granato, Daniel; Senaka Ranadheera, C; Nazarro, Filomena; Cruz, Adriano G

2018-04-25

The effect of the Lactobacillus casei 01 and inulin addition on sheep milk ice cream during storage (-18 °C, 150 days) was investigated. Control, probiotic and synbiotic ice cream (10% w/w sheep milk cream; 10% w/w sheep milk cream, L. casei 01, 6 log CFU/mL; 10% w/w inulin, L. casei 01, 6 log CFU/mL, respectively) were manufactured. Microbiological counts (probiotic count, survival after in vitro gastrointestinal resistance, Caco-2 cell adhesion), bioactivity and microstructure were analysed. Physical and textural characteristics, colour parameters, thermal analysis and organic acids/volatile compounds were also evaluated. All formulations supported L. casei 01 viability and maintained above the minimum therapeutic level (>6 log CFU/mL) during storage. Inulin did not affect L. casei 01 survival after the passage through simulated gastrointestinal tract and adhesion to Caco-2 cells while improved the ACE-inhibitory and antioxidant activity. L. casei 01 addition produced several volatile compounds, such as carboxylic acids, alcohols, aldehydes and ketones. Also, scanning electron microscopy showed an interaction between probiotic bacteria and inulin fibre on synbiotic ice cream and the adhesion of L. casei to Caco-2 cells was observed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Graphite and Hybrid Nanomaterials as Lubricant Additives

Directory of Open Access Journals (Sweden)

Zhenyu J. Zhang

2014-04-01

Full Text Available Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great potential of hybrid nanoparticles as anti-wear and extreme-pressure additives with excellent levels of performance. The organic part in the hybrid materials improves their flexibility and stability, while the inorganic part is responsible for hardness. The relationship between the design parameters of the organic coatings, such as molecular architecture and the lubrication performance, however, remains to be fully elucidated. A survey of current understanding of hybrid nanoparticles as lubricant additives is presented in this review.

RNA-sequencing-based transcriptome and biochemical analyses of steroidal saponin pathway in a complete set of Allium fistulosum—A. cepa monosomic addition lines

Science.gov (United States)

Abdelrahman, Mostafa; El-Sayed, Magdi; Sato, Shusei; Hirakawa, Hideki; Ito, Shin-ichi; Tanaka, Keisuke; Mine, Yoko; Sugiyama, Nobuo; Suzuki, Minoru; Yamauchi, Naoki

2017-01-01

The genus Allium is a rich source of steroidal saponins, and its medicinal properties have been attributed to these bioactive compounds. The saponin compounds with diverse structures play a pivotal role in Allium’s defense mechanism. Despite numerous studies on the occurrence and chemical structure of steroidal saponins, their biosynthetic pathway in Allium species is poorly understood. The monosomic addition lines (MALs) of the Japanese bunching onion (A. fistulosum, FF) with an extra chromosome from the shallot (A. cepa Aggregatum group, AA) are powerful genetic resources that enable us to understand many physiological traits of Allium. In the present study, we were able to isolate and identify Alliospiroside A saponin compound in A. fistulosum with extra chromosome 2A from shallot (FF2A) and its role in the defense mechanism against Fusarium pathogens. Furthermore, to gain molecular insight into the Allium saponin biosynthesis pathway, high-throughput RNA-Seq of the root, bulb, and leaf of AA, MALs, and FF was carried out using Illumina's HiSeq 2500 platform. An open access Allium Transcript Database (Allium TDB, http://alliumtdb.kazusa.or.jp) was generated based on RNA-Seq data. The resulting assembled transcripts were functionally annotated, revealing 50 unigenes involved in saponin biosynthesis. Differential gene expression (DGE) analyses of AA and MALs as compared with FF (as a control) revealed a strong up-regulation of the saponin downstream pathway, including cytochrome P450, glycosyltransferase, and beta-glucosidase in chromosome 2A. An understanding of the saponin compounds and biosynthesis-related genes would facilitate the development of plants with unique saponin content and, subsequently, improved disease resistance. PMID:28800607

RNA-sequencing-based transcriptome and biochemical analyses of steroidal saponin pathway in a complete set of Allium fistulosum-A. cepa monosomic addition lines.

Science.gov (United States)

Abdelrahman, Mostafa; El-Sayed, Magdi; Sato, Shusei; Hirakawa, Hideki; Ito, Shin-Ichi; Tanaka, Keisuke; Mine, Yoko; Sugiyama, Nobuo; Suzuki, Yutaka; Yamauchi, Naoki; Shigyo, Masayoshi

2017-01-01

The genus Allium is a rich source of steroidal saponins, and its medicinal properties have been attributed to these bioactive compounds. The saponin compounds with diverse structures play a pivotal role in Allium's defense mechanism. Despite numerous studies on the occurrence and chemical structure of steroidal saponins, their biosynthetic pathway in Allium species is poorly understood. The monosomic addition lines (MALs) of the Japanese bunching onion (A. fistulosum, FF) with an extra chromosome from the shallot (A. cepa Aggregatum group, AA) are powerful genetic resources that enable us to understand many physiological traits of Allium. In the present study, we were able to isolate and identify Alliospiroside A saponin compound in A. fistulosum with extra chromosome 2A from shallot (FF2A) and its role in the defense mechanism against Fusarium pathogens. Furthermore, to gain molecular insight into the Allium saponin biosynthesis pathway, high-throughput RNA-Seq of the root, bulb, and leaf of AA, MALs, and FF was carried out using Illumina's HiSeq 2500 platform. An open access Allium Transcript Database (Allium TDB, http://alliumtdb.kazusa.or.jp) was generated based on RNA-Seq data. The resulting assembled transcripts were functionally annotated, revealing 50 unigenes involved in saponin biosynthesis. Differential gene expression (DGE) analyses of AA and MALs as compared with FF (as a control) revealed a strong up-regulation of the saponin downstream pathway, including cytochrome P450, glycosyltransferase, and beta-glucosidase in chromosome 2A. An understanding of the saponin compounds and biosynthesis-related genes would facilitate the development of plants with unique saponin content and, subsequently, improved disease resistance.

Coculture with astrocytes reduces the radiosensitivity of glioblastoma stem-like cells and identifies additional targets for radiosensitization

International Nuclear Information System (INIS)

Rath, Barbara H; Wahba, Amy; Camphausen, Kevin; Tofilon, Philip J

2015-01-01

Toward developing a model system for investigating the role of the microenvironment in the radioresistance of glioblastoma (GBM), human glioblastoma stem-like cells (GSCs) were grown in coculture with human astrocytes. Using a trans-well assay, survival analyses showed that astrocytes significantly decreased the radiosensitivity of GSCs compared to standard culture conditions. In addition, when irradiated in coculture, the initial level of radiation-induced γH2AX foci in GSCs was reduced and foci dispersal was enhanced suggesting that the presence of astrocytes influenced the induction and repair of DNA double-strand breaks. These data indicate that astrocytes can decrease the radiosensitivity of GSCs in vitro via a paracrine-based mechanism and further support a role for the microenvironment as a determinant of GBM radioresponse. Chemokine profiling of coculture media identified a number of bioactive molecules not present under standard culture conditions. The gene expression profiles of GSCs grown in coculture were significantly different as compared to GSCs grown alone. These analyses were consistent with an astrocyte-mediated modification in GSC phenotype and, moreover, suggested a number of potential targets for GSC radiosensitization that were unique to coculture conditions. Along these lines, STAT3 was activated in GSCs grown with astrocytes; the JAK/STAT3 inhibitor WP1066 enhanced the radiosensitivity of GSCs under coculture conditions and when grown as orthotopic xenografts. Further, this coculture system may also provide an approach for identifying additional targets for GBM radiosensitization

Trace element analyses of fluid inclusions using laser ablation ICP-MS

Directory of Open Access Journals (Sweden)

Cong-ying Li

2018-03-01

Full Text Available Fluid inclusions are records of the physico-chemical conditions of fluid–rock interactions during magmatism, mineralization and fluid percolation and mixing processes. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS is a powerful tool for in situ analyses of small samples at micrometer levels. Here we report in situ analyses of fluid inclusions using LA-ICP-MS method. NIST SRM glasses and 23Na are generally used as external and internal standards for LA-ICP-MS analysis of fluid inclusion, respectively, although the RSD of microthermometric estimation of 23Na is about 20% and even worse, the background signal of Na is high for most ICP-MS. Using well-characterized natural fluids inclusion, we show that RESOlution S-155 laser system analyze fluid inclusions in quartz and determine the trace element concentrations. Resonetics RESOlution S-155 laser has the advantage of the motorized Z stage can be used to accommodate variation of sample height or sample topography and height difference between samples, which is very important for analyzing the fluid inclusion in quartz. Our results suggest laser energy density is 25 J/cm2, laser pulse repetition rates are commonly between 6 and 10 Hz to avoid the fissuring of quartz and obtain adequate results. For this LA-ICP-MS analysis, uncertainty on 35Cl content is around 40% because of intensity of the 35Cl signal is three orders of magnitude less intense than the intensity of the 23Na signal. Nevertheless, it is still a useful reference for fluid inclusion analyses in addition to 23Na. This technique can be applied to a range of hydrothermal geology problems, including determining the origins of ore forming brines and ore deposition processes, mapping metamorphic and hydrothermal fluid provinces and pathways, and constraining the effects of fluid–rock reactions and fluid mixing.

The Frontiers of Additive Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-03-03

Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

Full in-vitro analyses of new-generation bulk fill dental composites cured by halogen light.

Science.gov (United States)

Tekin, Tuçe Hazal; Kantürk Figen, Aysel; Yılmaz Atalı, Pınar; Coşkuner Filiz, Bilge; Pişkin, Mehmet Burçin

2017-08-01

The objective of this study was to investigate the full in-vitro analyses of new-generation bulk-fill dental composites cured by halogen light (HLG). Two types' four composites were studied: Surefill SDR (SDR) and Xtra Base (XB) as bulk-fill flowable materials; QuixFill (QF) and XtraFill (XF) as packable bulk-fill materials. Samples were prepared for each analysis and test by applying the same procedure, but with different diameters and thicknesses appropriate to the analysis and test requirements. Thermal properties were determined by thermogravimetric analysis (TG/DTG) and differential scanning calorimetry (DSC) analysis; the Vickers microhardness (VHN) was measured after 1, 7, 15 and 30days of storage in water. The degree of conversion values for the materials (DC, %) were immediately measured using near-infrared spectroscopy (FT-IR). The surface morphology of the composites was investigated by scanning electron microscopes (SEM) and atomic-force microscopy (AFM) analyses. The sorption and solubility measurements were also performed after 1, 7, 15 and 30days of storage in water. In addition to his, the data were statistically analyzed using one-way analysis of variance, and both the Newman Keuls and Tukey multiple comparison tests. The statistical significance level was established at pfill, resin-based dental composites. Copyright © 2017 Elsevier B.V. All rights reserved.

Characterization of Metal Powders Used for Additive Manufacturing.

Science.gov (United States)

Slotwinski, J A; Garboczi, E J; Stutzman, P E; Ferraris, C F; Watson, S S; Peltz, M A

2014-01-01

Additive manufacturing (AM) techniques can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process.

Characterization of Metal Powders Used for Additive Manufacturing

Science.gov (United States)

Slotwinski, JA; Garboczi, EJ; Stutzman, PE; Ferraris, CF; Watson, SS; Peltz, MA

2014-01-01

Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process. PMID:26601040

Polyploidy in the Olive Complex (Olea europaea): Evidence from Flow Cytometry and Nuclear Microsatellite Analyses

Science.gov (United States)

Besnard, G.; Garcia-Verdugo, C.; Rubio De Casas, R.; Treier, U. A.; Galland, N.; Vargas, P.

2008-01-01

Background Phylogenetic and phylogeographic investigations have been previously performed to study the evolution of the olive tree complex (Olea europaea). A particularly high genomic diversity has been found in north-west Africa. However, to date no exhaustive study has been addressed to infer putative polyploidization events and their evolutionary significance in the diversification of the olive tree and its relatives. Methods Representatives of the six olive subspecies were investigated using (a) flow cytometry to estimate genome content, and (b) six highly variable nuclear microsatellites to assess the presence of multiple alleles at co-dominant loci. In addition, nine individuals from a controlled cross between two individuals of O. europaea subsp. maroccana were characterized with microsatellites to check for chromosome inheritance. Key Results Based on flow cytometry and genetic analyses, strong evidence for polyploidy was obtained in subspp. cerasiformis (tetraploid) and maroccana (hexaploid), whereas the other subspecies appeared to be diploids. Agreement between flow cytometry and genetic analyses gives an alternative approach to chromosome counting to determine ploidy level of trees. Lastly, abnormalities in chromosomes inheritance leading to aneuploid formation were revealed using microsatellite analyses in the offspring from the controlled cross in subsp. maroccana. Conclusions This study constitutes the first report for multiple polyploidy in olive tree relatives. Formation of tetraploids and hexaploids may have played a major role in the diversification of the olive complex in north-west Africa. The fact that polyploidy is found in narrow endemic subspecies from Madeira (subsp. cerasiformis) and the Agadir Mountains (subsp. maroccana) suggests that polyploidization has been favoured to overcome inbreeding depression. Lastly, based on previous phylogenetic analyses, we hypothesize that subsp. cerasiformis resulted from hybridization between ancestors

Comparative biochemical analyses of venous blood and peritoneal fluid from horses with colic using a portable analyser and an in-house analyser.

Science.gov (United States)

Saulez, M N; Cebra, C K; Dailey, M

2005-08-20

Fifty-six horses with colic were examined over a period of three months. The concentrations of glucose, lactate, sodium, potassium and chloride, and the pH of samples of blood and peritoneal fluid, were determined with a portable clinical analyser and with an in-house analyser and the results were compared. Compared with the in-house analyser, the portable analyser gave higher pH values for blood and peritoneal fluid with greater variability in the alkaline range, and lower pH values in the acidic range, lower concentrations of glucose in the range below 8.3 mmol/l, and lower concentrations of lactate in venous blood in the range below 5 mmol/l and in peritoneal fluid in the range below 2 mmol/l, with less variability. On average, the portable analyser underestimated the concentrations of lactate and glucose in peritoneal fluid in comparison with the in-house analyser. Its measurements of the concentrations of sodium and chloride in peritoneal fluid had a higher bias and were more variable than the measurements in venous blood, and its measurements of potassium in venous blood and peritoneal fluid had a smaller bias and less variability than the measurements made with the in-house analyser.

Approach to integrate current safeguards measures with additional protocol requirements at national level

International Nuclear Information System (INIS)

Ramirez, R.

2001-01-01

Peru adhered to the Additional Protocol in March 2000 which was also approved by the Congress in May 2001. After approval by law the obligations derived from this Additional Protocol will be in force after 180 days. After the signing of the Protocol an approach was designed to help better fulfill these requirements in an integrated way with the previous measures. As first stage, a review of the current state of safeguards was undertaken. Under the current agreement (an INFCIRC/153 type agreement) the reporting is less complicated and inexpensive to be carried out because these reports include only the declared nuclear material and the features of declared facilities where the nuclear material is used. No other related facility or material or activity needs to be declared. In Peru there are only two MBAs where low enriched uranium (LEU) is used and the record system includes general ledgers, inventory records and operational books. The results of national inspections and copies of reports and communications sent to the IAEA are also kept in this system. Under the agreement and subsidiary arrangements material balance reports (MBR), physical inventory listings (PIL) and inventory change reports (ICR) are prepared and submitted to the IAEA at scheduled periods. The MBR and PIL reports are sent after yearly regular inspections carried out by the IAEA. The ICR is sent just every time when an import or export of nuclear material is made. The time devoted to carry out all of these activities is not so extensive for both the State System for Accountability and Control (SSAC) and the users because of the limited nuclear activities in the country. Because of the characteristics and limited quantities of nuclear material the efforts for inspection and reporting activities are few. Another subject under review was the procedure for controlling the imports of nuclear material. Under the current agreement this subject was not a problem, as all of the radioactive and nuclear

On the assessment of shooting sounds : Loudness-level weightings versus A- and C-weighted sound exposure levels (L)

NARCIS (Netherlands)

Vos, J.; Geurtsen, F.W.M.

2003-01-01

As an alternative to the A-weighted sound exposure level (ASEL) Schomer et al. [J. Acoust. Soc. Am. 110, 2390-2397 (2001)] used the equal-loudness level contours as a dynamic filter to determine the loudness-level-weighted sound exposure level (LLSEL). From their analyses they concluded that the

Hybridization between two cryptic filamentous brown seaweeds along the shore: analysing pre- and postzygotic barriers in populations of individuals with varying ploidy levels.

Science.gov (United States)

Montecinos, Alejandro E; Guillemin, Marie-Laure; Couceiro, Lucia; Peters, Akira F; Stoeckel, Solenn; Valero, Myriam

2017-07-01

We aimed to study the importance of hybridization between two cryptic species of the genus Ectocarpus, a group of filamentous algae with haploid-diploid life cycles that include the principal genetic model organism for the brown algae. In haploid-diploid species, the genetic structure of the two phases of the life cycle can be analysed separately in natural populations. Such life cycles provide a unique opportunity to estimate the frequency of hybrid genotypes in diploid sporophytes and meiotic recombinant genotypes in haploid gametophytes allowing the effects of reproductive barriers preventing fertilization or preventing meiosis to be untangle. The level of hybridization between E. siliculosus and E. crouaniorum was quantified along the European coast. Clonal cultures (568 diploid, 336 haploid) isolated from field samples were genotyped using cytoplasmic and nuclear markers to estimate the frequency of hybrid genotypes in diploids and recombinant haploids. We identified admixed individuals using microsatellite loci, classical assignment methods and a newly developed Bayesian method (XPloidAssignment), which allows the analysis of populations that exhibit variations in ploidy level. Over all populations, the level of hybridization was estimated at 8.7%. Hybrids were exclusively observed in sympatric populations. More than 98% of hybrids were diploids (40% of which showed signs of aneuploidy) with a high frequency of rare alleles. The near absence of haploid recombinant hybrids demonstrates that the reproductive barriers are mostly postzygotic and suggests that abnormal chromosome segregation during meiosis following hybridization of species with different genome sizes could be a major cause of interspecific incompatibility in this system. © 2017 John Wiley & Sons Ltd.

Back-Analyses of Landfill Instability Induced by High Water Level: Case Study of Shenzhen Landfill

Directory of Open Access Journals (Sweden)

Ren Peng

2016-01-01

Full Text Available In June 2008, the Shenzhen landfill slope failed. This case is used as an example to study the deformation characteristics and failure mode of a slope induced by high water levels. An integrated monitoring system, including water level gauges, electronic total stations, and inclinometers, was used to monitor the slope failure process. The field measurements suggest that the landfill landslide was caused by a deep slip along the weak interface of the composite liner system at the base of the landfill. The high water level is considered to be the main factor that caused this failure. To calculate the relative interface shear displacements in the geosynthetic multilayer liner system, a series of numerical direct shear tests were carried out. Based on the numerical results, the composite lining system simplified and the centrifuge modeling technique was used to quantitatively evaluate the effect of water levels on landfill instability.

Back-Analyses of Landfill Instability Induced by High Water Level: Case Study of Shenzhen Landfill

Science.gov (United States)

Peng, Ren; Hou, Yujing; Zhan, Liangtong; Yao, Yangping

2016-01-01

In June 2008, the Shenzhen landfill slope failed. This case is used as an example to study the deformation characteristics and failure mode of a slope induced by high water levels. An integrated monitoring system, including water level gauges, electronic total stations, and inclinometers, was used to monitor the slope failure process. The field measurements suggest that the landfill landslide was caused by a deep slip along the weak interface of the composite liner system at the base of the landfill. The high water level is considered to be the main factor that caused this failure. To calculate the relative interface shear displacements in the geosynthetic multilayer liner system, a series of numerical direct shear tests were carried out. Based on the numerical results, the composite lining system simplified and the centrifuge modeling technique was used to quantitatively evaluate the effect of water levels on landfill instability. PMID:26771627

Plant dynamics analyses of fast reactor concept: RAPID-A without any control rod

International Nuclear Information System (INIS)

Kambe, Mitsuru

1996-01-01

Plant dynamics analyses of a fast reactor concept RAPID-A without any control rod have been demonstrated in case of reactor startup and sudden change of the primary flow rate. RAIP-A concept involves Lithium Expansion Module (LEM) for inherent reactivity feedback, Lithium Injection Module (LIM) for inherent ultimate shutdown and Lithium Release Module (LRM) for automated reactor startup. LEM consists of Quick-LEM and Slow-LEM. Slow-LEM provides with moderate reactivity addition as decreasing temperature. Quick-LEM assures quick negative reactivity feedback as increasing temperature. Plant dynamics analyses revealed that reactor power is nearly proportional to the primary flow rate even if the flow rate increases suddenly. Fully automated reactor startup from the subcritical condition has been attempted by inserting reactivity at a constant rate by LRM. Allowable rate of reactivity addition has been obtained in respect to Quick-LEM reactivity worth. (author)

Using the ICF in economic analyses of Assistive Technology systems: methodological implications of a user standpoint.

Science.gov (United States)

Schraner, Ingrid; De Jonge, Desleigh; Layton, Natasha; Bringolf, Jane; Molenda, Agata

2008-01-01

This paper identifies key methodological issues for economic analyses of costs and effectiveness of Assistive Technology (AT) systems based on the International Classification of Functioning, Disability and Health (ICF). Following the biopsychosocial model of the ICF, the paper explores the consequences for cost-effectiveness analyses of AT systems when a user centred approach is taken. In so doing, the paper questions the fiction of neutrality in economic analyses and discusses the distinction between weak and strong objectivity. Costs are measured as all resources used when providing a particular level of environmental facilitators and reducing environmental barriers for an AT user, while effectiveness is measured in terms of the resulting increase in activities and participation of the AT user. The ICF's fourth qualifier for activities and participation, which denotes performance without assistance is used to identify the additional performance achieved due to the particular environmental factors in the current situation (first qualifier). A fifth qualifier for activities and participation is introduced to denote performance with optimal assistance, and the fourth qualifier is then again used to identify the increase in activities and participation due to the environmental factors in the situation with optimal assistance. The effectiveness that an AT user achieves in his or her current situation can be compared with the effectiveness he or she could achieve when provided with what is considered an optimal AT system based on current technologies and user priorities. This comparison throws into sharp relief the role of AT systems as well as of universal design (UD) in reducing environmental barriers for AT users in a way that is cost-effective for society as a whole. Cost-effectiveness analysis based on the ICF can provide powerful economic evidence for how best to allocate existing funding for AT systems. We can identify three particular scenarios in which clear

SOCR Analyses: Implementation and Demonstration of a New Graphical Statistics Educational Toolkit

Directory of Open Access Journals (Sweden)

Annie Chu

2009-04-01

Full Text Available The web-based, Java-written SOCR (Statistical Online Computational Resource toolshave been utilized in many undergraduate and graduate level statistics courses for sevenyears now (Dinov 2006; Dinov et al. 2008b. It has been proven that these resourcescan successfully improve students' learning (Dinov et al. 2008b. Being rst publishedonline in 2005, SOCR Analyses is a somewhat new component and it concentrate on datamodeling for both parametric and non-parametric data analyses with graphical modeldiagnostics. One of the main purposes of SOCR Analyses is to facilitate statistical learn-ing for high school and undergraduate students. As we have already implemented SOCRDistributions and Experiments, SOCR Analyses and Charts fulll the rest of a standardstatistics curricula. Currently, there are four core components of SOCR Analyses. Linearmodels included in SOCR Analyses are simple linear regression, multiple linear regression,one-way and two-way ANOVA. Tests for sample comparisons include t-test in the para-metric category. Some examples of SOCR Analyses' in the non-parametric category areWilcoxon rank sum test, Kruskal-Wallis test, Friedman's test, Kolmogorov-Smirno testand Fligner-Killeen test. Hypothesis testing models include contingency table, Friedman'stest and Fisher's exact test. The last component of Analyses is a utility for computingsample sizes for normal distribution. In this article, we present the design framework,computational implementation and the utilization of SOCR Analyses.

Cross-sectional associations of active transport, employment status and objectively measured physical activity: analyses from the National Health and Nutrition Examination Survey.

Science.gov (United States)

Yang, Lin; Hu, Liang; Hipp, J Aaron; Imm, Kellie R; Schutte, Rudolph; Stubbs, Brendon; Colditz, Graham A; Smith, Lee

2018-05-05

To investigate associations between active transport, employment status and objectively measured moderate-to-vigorous physical activity (MVPA) in a representative sample of US adults. Cross-sectional analyses of data from the National Health and Nutrition Examination Survey. A total of 5180 adults (50.2 years old, 49.0% men) were classified by levels of active transportation and employment status. Outcome measure was weekly time spent in MVPA as recorded by the Actigraph accelerometer. Associations between active transport, employment status and objectively measured MVPA were examined using multivariable linear regression models adjusted for age, body mass index, race and ethnicity, education level, marital status, smoking status, working hour duration (among the employed only) and self-reported leisure time physical activity. Patterns of active transport were similar between the employed (n=2897) and unemployed (n=2283), such that 76.0% employed and 77.5% unemployed engaged in no active transport. For employed adults, those engaging in high levels of active transport (≥90 min/week) had higher amount of MVPA than those who did not engage in active transport. This translated to 40.8 (95% CI 15.7 to 65.9) additional minutes MVPA per week in men and 57.9 (95% CI 32.1 to 83.7) additional minutes MVPA per week in women. Among the unemployed adults, higher levels of active transport were associated with more MVPA among men (44.8 min/week MVPA, 95% CI 9.2 to 80.5) only. Findings from the present study support interventions to promote active transport to increase population level physical activity. Additional strategies are likely required to promote physical activity among unemployed women. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Alternatives Generation and Analysis for Phase 1 High-Level Waste Feed Tanks Selection

International Nuclear Information System (INIS)

CRAWFORD, T.W.

1999-01-01

A recent revision of the US Department of Energy privatization contract for the immobilization of high-level waste (HLW) at Hanford necessitates the investigation of alternative waste feed sources to meet contractual feed requirements. This analysis identifies wastes to be considered as HLW feeds and develops and conducts alternative analyses to comply with established criteria. A total of 12,426 cases involving 72 waste streams are evaluated and ranked in three cost-based alternative models. Additional programmatic criteria are assessed against leading alternative options to yield an optimum blended waste feed stream

Economic value addition, employment, and enterprise profiles of local authorities in the Free State, South Africa

Directory of Open Access Journals (Sweden)

Danie Francois Toerien

2015-12-01

Full Text Available A strong underlying structure in the economic, demographic, and entrepreneurial domains of local authorities (municipalities in the Free State, South Africa was detected through cluster and other analyses. The structure is indicative of a system in which economic value addition, population size, employment creation, and entrepreneurial domains are dynamically linked. The agriculture, mining, and fuel and chemicals sectors dominate the economic value addition in some municipalities, whereas others are without a single dominating economic sector (i.e. they have well-balanced economies. The agriculture and households sectors are significant sources of employment in all municipalities. Cluster sequence analyses of the municipalities revealed statistically significant recurring patterns of value addition, employment, and entrepreneurship, further strengthening the detection of orderliness, which can promote mutual learning. The Metsimaholo municipality with a significant manufacturing base is an atypical Free State municipality and provides an outstanding example of the economic, demographic, and entrepreneurial impacts of value addition to local or external primary products.

Multigene analyses resolve early diverging lineages in the Rhodymeniophycidae (Florideophyceae, Rhodophyta).

Science.gov (United States)

Saunders, Gary W; Filloramo, Gina; Dixon, Kyatt; Le Gall, Line; Maggs, Christine A; Kraft, Gerald T

2016-08-01

Multigene phylogenetic analyses were directed at resolving the earliest divergences in the red algal subclass Rhodymeniophycidae. The inclusion of key taxa (new to science and/or previously lacking molecular data), additional sequence data (SSU, LSU, EF2, rbcL, COI-5P), and phylogenetic analyses removing the most variable sites (site stripping) have provided resolution for the first time at these deep nodes. The earliest diverging lineage within the subclass was the enigmatic Catenellopsis oligarthra from New Zealand (Catenellopsidaceae), which is here placed in the Catenellopsidales ord. nov. In our analyses, Atractophora hypnoides was not allied with the other included Bonnemaisoniales, but resolved as sister to the Peyssonneliales, and is here assigned to Atractophoraceae fam. nov. in the Atractophorales ord. nov. Inclusion of Acrothesaurum gemellifilum gen. et sp. nov. from Tasmania has greatly improved our understanding of the Acrosymphytales, to which we assign three families, the Acrosymphytaceae, Acrothesauraceae fam. nov. and Schimmelmanniaceae fam. nov. © 2016 Phycological Society of America.

The additive hazards model with high-dimensional regressors

DEFF Research Database (Denmark)

Martinussen, Torben; Scheike, Thomas

2009-01-01

This paper considers estimation and prediction in the Aalen additive hazards model in the case where the covariate vector is high-dimensional such as gene expression measurements. Some form of dimension reduction of the covariate space is needed to obtain useful statistical analyses. We study...... model. A standard PLS algorithm can also be constructed, but it turns out that the resulting predictor can only be related to the original covariates via time-dependent coefficients. The methods are applied to a breast cancer data set with gene expression recordings and to the well known primary biliary...

High-Efficient Circuits for Ternary Addition

Directory of Open Access Journals (Sweden)

Reza Faghih Mirzaee

2014-01-01

Full Text Available New ternary adders, which are fundamental components of ternary addition, are presented in this paper. They are on the basis of a logic style which mostly generates binary signals. Therefore, static power dissipation reaches its minimum extent. Extensive different analyses are carried out to examine how efficient the new designs are. For instance, the ternary ripple adder constructed by the proposed ternary half and full adders consumes 2.33 μW less power than the one implemented by the previous adder cells. It is almost twice faster as well. Due to their unique superior characteristics for ternary circuitry, carbon nanotube field-effect transistors are used to form the novel circuits, which are entirely suitable for practical applications.

K-capture by Al-Si based Additives in an Entrained Flow Reactor

DEFF Research Database (Denmark)

Wang, Guoliang; Jensen, Peter Arendt; Wu, Hao

2016-01-01

A water slurry, consisting of KCl and Al-Si based additives (kaolin and coal fly ash) was fed into an entrained flow reactor (EFR) to study the K-capturing reaction of the additives at suspension-fired conditions. Solid products collected from the reactor were analysed with respect to total...... of KCl to K-aluminosilicate decreased. When reaction temperature increased from 1100 °C to 1450 °C, the conversion of KCl does not change significantly, which differs from the trend observed in fixed-bed reactor....

Indian Point 2 steam generator tube rupture analyses

International Nuclear Information System (INIS)

Dayan, A.

1985-01-01

Analyses were conducted with RETRAN-02 to study consequences of steam generator tube rupture (SGTR) events. The Indian Point, Unit 2, power plant (IP2, PWR) was modeled as a two asymmetric loops, consisting of 27 volumes and 37 junctions. The break section was modeled once, conservatively, as a 150% flow area opening at the wall of the steam generator cold leg plenum, and once as a 200% double-ended tube break. Results revealed 60% overprediction of breakflow rates by the traditional conservative model. Two SGTR transients were studied, one with low-pressure reactor trip and one with an earlier reactor trip via over temperature ΔT. The former is more typical to a plant with low reactor average temperature such as IP2. Transient analyses for a single tube break event over 500 seconds indicated continued primary subcooling and no need for steam line pressure relief. In addition, SGTR transients with reactor trip while the pressurizer still contains water were found to favorably reduce depressurization rates. Comparison of the conservative results with independent LOFTRAN predictions showed good agreement

Quantification of birefringence readily measures the level of muscle damage in zebrafish

Energy Technology Data Exchange (ETDEWEB)

Berger, Joachim, E-mail: Joachim.Berger@Monash.edu [Australian Regenerative Medicine Institute, EMBL Australia, Monash University, Clayton (Australia); Sztal, Tamar; Currie, Peter D. [Australian Regenerative Medicine Institute, EMBL Australia, Monash University, Clayton (Australia)

2012-07-13

Highlights: Black-Right-Pointing-Pointer Report of an unbiased quantification of the birefringence of muscle of fish larvae. Black-Right-Pointing-Pointer Quantification method readily identifies level of overall muscle damage. Black-Right-Pointing-Pointer Compare zebrafish muscle mutants for level of phenotype severity. Black-Right-Pointing-Pointer Proposed tool to survey treatments that aim to ameliorate muscular dystrophy. -- Abstract: Muscular dystrophies are a group of genetic disorders that progressively weaken and degenerate muscle. Many zebrafish models for human muscular dystrophies have been generated and analysed, including dystrophin-deficient zebrafish mutants dmd that model Duchenne Muscular Dystrophy. Under polarised light the zebrafish muscle can be detected as a bright area in an otherwise dark background. This light effect, called birefringence, results from the diffraction of polarised light through the pseudo-crystalline array of the muscle sarcomeres. Muscle damage, as seen in zebrafish models for muscular dystrophies, can readily be detected by a reduction in the birefringence. Therefore, birefringence is a very sensitive indicator of overall muscle integrity within larval zebrafish. Unbiased documentation of the birefringence followed by densitometric measurement enables the quantification of the birefringence of zebrafish larvae. Thereby, the overall level of muscle integrity can be detected, allowing the identification and categorisation of zebrafish muscle mutants. In addition, we propose that the establish protocol can be used to analyse treatments aimed at ameliorating dystrophic zebrafish models.

Quantification of birefringence readily measures the level of muscle damage in zebrafish

International Nuclear Information System (INIS)

Berger, Joachim; Sztal, Tamar; Currie, Peter D.

2012-01-01

Highlights: ► Report of an unbiased quantification of the birefringence of muscle of fish larvae. ► Quantification method readily identifies level of overall muscle damage. ► Compare zebrafish muscle mutants for level of phenotype severity. ► Proposed tool to survey treatments that aim to ameliorate muscular dystrophy. -- Abstract: Muscular dystrophies are a group of genetic disorders that progressively weaken and degenerate muscle. Many zebrafish models for human muscular dystrophies have been generated and analysed, including dystrophin-deficient zebrafish mutants dmd that model Duchenne Muscular Dystrophy. Under polarised light the zebrafish muscle can be detected as a bright area in an otherwise dark background. This light effect, called birefringence, results from the diffraction of polarised light through the pseudo-crystalline array of the muscle sarcomeres. Muscle damage, as seen in zebrafish models for muscular dystrophies, can readily be detected by a reduction in the birefringence. Therefore, birefringence is a very sensitive indicator of overall muscle integrity within larval zebrafish. Unbiased documentation of the birefringence followed by densitometric measurement enables the quantification of the birefringence of zebrafish larvae. Thereby, the overall level of muscle integrity can be detected, allowing the identification and categorisation of zebrafish muscle mutants. In addition, we propose that the establish protocol can be used to analyse treatments aimed at ameliorating dystrophic zebrafish models.

3D analyses of cavitation instabilities accounting for plastic anisotropy

DEFF Research Database (Denmark)

Legarth, Brian Nyvang; Tvergaard, Viggo

2010-01-01

Full three dimensional cell model analyses are carried out for a solid containing a single small void, in order to determine the critical stress levels for the occurrence of cavitation instabilities. The material models applied are elastic‐viscoplastic, with a small rate‐hardening exponent...... that the quasi‐static solution is well approximated. A special procedure is used to strongly reduce the loading rate a little before the instability occurs. It is found that plastic anisotropy has a significant effect on the level of the critical stress for cavitation instabilities....

The effect of alum addition on microbial communities in poultry litter.

Science.gov (United States)

Rothrock, M J; Cook, K L; Warren, J G; Sistani, K

2008-08-01

Alum [Al(2)(SO(4))(3).14H(2)O] is a common poultry litter amendment used to decrease water-soluble phosphorus or reduce ammonia volatilization, or both. Although the physiochemical effects of alum addition have been well researched, little attention has been given to the poultry litter microbial communities. The goal of this study was to use molecular biological methods [denaturing gradient gel electrophoresis (DGGE), community cloning, and quantitative real-time PCR] to characterize general, group-specific and pathogenic microbial communities in alum (10% wt/wt) and non-alum-treated litter. According to quantitative real-time PCR analyses, alum addition to the poultry litter resulted in significant reductions in both Campylobacter jejuni and Escherichia coli concentrations by the end of the first month of the experiment (3 log and 2 log, respectively). The concentrations of Salmonella spp. were below detection (Eubacterium and low %GC gram-positive groups in the alum-treated litters by the end of the first month, with no bands detectable for either group after 8 wk of incubation. Conversely, minimal effects of alum addition were observed in the Actinomycetes community. The most significant shift in the microbial community (based on DGGE analyses) occurred in the fungal population, with a large increase in diversity and abundance within 1 mo of alum addition (1 dominant band on d 0 to 9 dominant bands at 4 wk). Specifically, the incidence of Aspergillus spp. increased from 0 to 50% of the sequences in fungal clone libraries (n = 80) over the course of the experiment. This suggests that the addition of alum to poultry litter potentially shifts the microbial populations from bacterially dominated to dominated by fungi. The ramifications of this shift in dominance are still unknown, and future work will be aimed at characterizing these fungi and elucidating their role in the acidified litter environment.

Product analyses and kinetic studies on gas phase oxidation of the fuel additive ethyl tert-butyl ether and its products; Produktanalysen und Kinetikuntersuchungen der Gasphasenoxidation des Kraftstoffadditivs Ethyl-tert-butylether und seiner Produkte

Energy Technology Data Exchange (ETDEWEB)

Becker, K H; Thuener, L

1997-04-01

The widespread use of the additive ETBE in gasoline leads to an increased release of this compound into the atmosphere via evaporation or exhaust fumes. In order to determine the influence of this additive on trace gas cycles it is first necessary to carry out studies on the degradation mechanisms and pertinent kinetic properties of this substance. The aim of the present study was to examine the degradation mechanisms of the fuel additive t-butyl ethyl ether under atmospheric conditions. The reactions of the main degradation products (t-butyl formiate and t-butyl acetate, together ca. 80%) were also studied in order to obtain as complete a picture of the degradation paths as possible. This was to permit an assessment of the influence of ETBE and its products on tropospheric trace gas cycles and ozone formation. [Deutsch] Bei haeufigem Zusatz von ETBE in Benzin wird diese Verbindung durch Verdampfung oder als Abgas verstaerkt in die Atmosphaere abgegeben. Um den Einfluss des Additivs auf die Spurengas-Kreislaeufe zu bestimmen, sind daher Untersuchungen noetig, um die Abbau-Mechanismen und die zugehoerigen kinetischen Daten zu ermitteln. Das Ziel dieser Arbeit ist die Untersuchung der Abbaumechanismen des Kraftstoffadditivs t-Butylethylether unter atmosphaerischen Bedingungen. Fuer eine moeglichst vollstaendige Analyse des Abbauweges werden auch die Reaktionen der Hauptabbauprodukte (t-Butylformiat und t-Butylacetat, zusammen etwa 80%) untersucht. Dadurch soll der Einfluss auf troposphaerische Spurengas-Kreislaeufe und auf die Ozonbildung von ETBE und seinen Produkten abgeschaetzt werden. (orig./SR)

Uncertainty and Sensitivity Analyses Plan

International Nuclear Information System (INIS)

Simpson, J.C.; Ramsdell, J.V. Jr.

1993-04-01

Hanford Environmental Dose Reconstruction (HEDR) Project staff are developing mathematical models to be used to estimate the radiation dose that individuals may have received as a result of emissions since 1944 from the US Department of Energy's (DOE) Hanford Site near Richland, Washington. An uncertainty and sensitivity analyses plan is essential to understand and interpret the predictions from these mathematical models. This is especially true in the case of the HEDR models where the values of many parameters are unknown. This plan gives a thorough documentation of the uncertainty and hierarchical sensitivity analysis methods recommended for use on all HEDR mathematical models. The documentation includes both technical definitions and examples. In addition, an extensive demonstration of the uncertainty and sensitivity analysis process is provided using actual results from the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC). This demonstration shows how the approaches used in the recommended plan can be adapted for all dose predictions in the HEDR Project

Sensitivity and uncertainty analyses for performance assessment modeling

International Nuclear Information System (INIS)

Doctor, P.G.

1988-08-01

Sensitivity and uncertainty analyses methods for computer models are being applied in performance assessment modeling in the geologic high level radioactive waste repository program. The models used in performance assessment tend to be complex physical/chemical models with large numbers of input variables. There are two basic approaches to sensitivity and uncertainty analyses: deterministic and statistical. The deterministic approach to sensitivity analysis involves numerical calculation or employs the adjoint form of a partial differential equation to compute partial derivatives; the uncertainty analysis is based on Taylor series expansions of the input variables propagated through the model to compute means and variances of the output variable. The statistical approach to sensitivity analysis involves a response surface approximation to the model with the sensitivity coefficients calculated from the response surface parameters; the uncertainty analysis is based on simulation. The methods each have strengths and weaknesses. 44 refs

Meta-analyses of HFE variants in coronary heart disease.

Science.gov (United States)

Lian, Jiangfang; Xu, Limin; Huang, Yi; Le, Yanping; Jiang, Danjie; Yang, Xi; Xu, Weifeng; Huang, Xiaoyan; Dong, Changzheng; Ye, Meng; Zhou, Jianqing; Duan, Shiwei

2013-09-15

HFE gene variants can cause hereditary hemochromatosis (HH) that often comes along with an increased risk of coronary heart disease (CHD). The goal of our study is to assess the contribution of four HFE gene variants to the risk of CHD. We conducted four meta-analyses of the studies examining the association between four HFE gene variants and the risk of CHD. A systematic search was conducted using MEDLINE, EMBASE, Web of Science and China National Knowledge Infrastructure (CNKI), Wanfang Chinese Periodical. Meta-analyses showed that HFE rs1799945-G allele was associated with a 6% increased risk of CHD (P=0.02, odds ratio (OR)=1.06, 95% confidence interval (CI)=1.01-1.11). However, no association between the other three HFE gene variants (rs1800562, rs1800730, and rs9366637) and CHD risk was observed by the meta-analyses (all P values>0.05). In addition, the results of our case-control study indicated that rs1800562 and rs1800730 were monomorphic, and that rs1799945 and rs9366637 were not associated with CHD in Han Chinese. Our meta-analysis suggested that a significant association existed between rs1799945 mutation and CHD, although this mutation was rare in Han Chinese. Copyright © 2013 Elsevier B.V. All rights reserved.

Improving risk assessment of color additives in medical device polymers.

Science.gov (United States)

Chandrasekar, Vaishnavi; Janes, Dustin W; Forrey, Christopher; Saylor, David M; Bajaj, Akhil; Duncan, Timothy V; Zheng, Jiwen; Riaz Ahmed, Kausar B; Casey, Brendan J

2018-01-01

Many polymeric medical device materials contain color additives which could lead to adverse health effects. The potential health risk of color additives may be assessed by comparing the amount of color additive released over time to levels deemed to be safe based on available toxicity data. We propose a conservative model for exposure that requires only the diffusion coefficient of the additive in the polymer matrix, D, to be specified. The model is applied here using a model polymer (poly(ether-block-amide), PEBAX 2533) and color additive (quinizarin blue) system. Sorption experiments performed in an aqueous dispersion of quinizarin blue (QB) into neat PEBAX yielded a diffusivity D = 4.8 × 10 -10 cm 2  s -1 , and solubility S = 0.32 wt %. On the basis of these measurements, we validated the model by comparing predictions to the leaching profile of QB from a PEBAX matrix into physiologically representative media. Toxicity data are not available to estimate a safe level of exposure to QB, as a result, we used a Threshold of Toxicological Concern (TTC) value for QB of 90 µg/adult/day. Because only 30% of the QB is released in the first day of leaching for our film thickness and calculated D, we demonstrate that a device may contain significantly more color additive than the TTC value without giving rise to a toxicological concern. The findings suggest that an initial screening-level risk assessment of color additives and other potentially toxic compounds found in device polymers can be improved. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 310-319, 2018. © 2017 Wiley Periodicals, Inc.

Long-term uranium supply-demand analyses

International Nuclear Information System (INIS)

1986-12-01

It is the intention of this study to investigate the long-term uranium supply demand situation using a number of supply and demand related assumptions. For supply, these assumptions as used in the Resources and Production Projection (RAPP) model include country economic development status, and consequent lead times for exploration and development, uranium development status, country infrastructure, and uranium resources including the Reasonably Assured (RAR), Estimated Additional, Categories I and II, (EAR-I and II) and Speculative Resource categories. The demand assumptions were based on the ''pure'' reactor strategies developed by the NEA Working Party on Nuclear Fuel Cycle Requirements for the 1986 OECD (NEA)/IAEA reports ''Nuclear Energy and its Fuel Cycle: Prospects to 2025''. In addition for this study, a mixed strategy case was computed using the averages of the Plutonium (Pu) burning LWR high, and the improved LWR low cases. It is understandable that such a long-term analysis cannot present hard facts, but it can show which variables may in fact influence the long-term supply-demand situation. It is hoped that results of this study will provide valuable information for planners in the uranium supply and demand fields. Periodical re-analyses with updated data bases will be needed from time to time

Utilization of Bamboo Charcoal as Additives in Cakes

Directory of Open Access Journals (Sweden)

Ronald O. Ocampo

2015-12-01

Full Text Available Charcoal has been used for healing various diseases, as antidote to poisoning and as purifying agent to filtered water. This study is conducted to utilize charcoal as additives in making cakes. Specifically, it is intended to determine the acceptable level of charcoal when used as additives in the production of brownies, dark brown chocolate, and chiffon cakes. It can be concluded that an addition of 1 tablespoon of bamboo charcoal gave the highest sensory evaluation to brownies and 3 tablespoon to dark brown chocolate .The control ( no charcoal added is still the best treatment for chiffon cake.

Additive and Interactive Effects on Response Time Distributions in Visual Word Recognition

Science.gov (United States)

Yap, Melvin J.; Balota, David A.

2007-01-01

Across 3 different word recognition tasks, distributional analyses were used to examine the joint effects of stimulus quality and word frequency on underlying response time distributions. Consistent with the extant literature, stimulus quality and word frequency produced additive effects in lexical decision, not only in the means but also in the…

Sample heterogeneity in unipolar depression as assessed by functional connectivity analyses is dominated by general disease effects.

Science.gov (United States)

Feder, Stephan; Sundermann, Benedikt; Wersching, Heike; Teuber, Anja; Kugel, Harald; Teismann, Henning; Heindel, Walter; Berger, Klaus; Pfleiderer, Bettina

2017-11-01

Combinations of resting-state fMRI and machine-learning techniques are increasingly employed to develop diagnostic models for mental disorders. However, little is known about the neurobiological heterogeneity of depression and diagnostic machine learning has mainly been tested in homogeneous samples. Our main objective was to explore the inherent structure of a diverse unipolar depression sample. The secondary objective was to assess, if such information can improve diagnostic classification. We analyzed data from 360 patients with unipolar depression and 360 non-depressed population controls, who were subdivided into two independent subsets. Cluster analyses (unsupervised learning) of functional connectivity were used to generate hypotheses about potential patient subgroups from the first subset. The relationship of clusters with demographical and clinical measures was assessed. Subsequently, diagnostic classifiers (supervised learning), which incorporated information about these putative depression subgroups, were trained. Exploratory cluster analyses revealed two weakly separable subgroups of depressed patients. These subgroups differed in the average duration of depression and in the proportion of patients with concurrently severe depression and anxiety symptoms. The diagnostic classification models performed at chance level. It remains unresolved, if subgroups represent distinct biological subtypes, variability of continuous clinical variables or in part an overfitting of sparsely structured data. Functional connectivity in unipolar depression is associated with general disease effects. Cluster analyses provide hypotheses about potential depression subtypes. Diagnostic models did not benefit from this additional information regarding heterogeneity. Copyright © 2017 Elsevier B.V. All rights reserved.

The land-ice contribution to 21st-century dynamic sea level rise

Science.gov (United States)

Howard, T.; Ridley, J.; Pardaens, A. K.; Hurkmans, R. T. W. L.; Payne, A. J.; Giesen, R. H.; Lowe, J. A.; Bamber, J. L.; Edwards, T. L.; Oerlemans, J.

2014-06-01

Climate change has the potential to influence global mean sea level through a number of processes including (but not limited to) thermal expansion of the oceans and enhanced land ice melt. In addition to their contribution to global mean sea level change, these two processes (among others) lead to local departures from the global mean sea level change, through a number of mechanisms including the effect on spatial variations in the change of water density and transport, usually termed dynamic sea level changes. In this study, we focus on the component of dynamic sea level change that might be given by additional freshwater inflow to the ocean under scenarios of 21st-century land-based ice melt. We present regional patterns of dynamic sea level change given by a global-coupled atmosphere-ocean climate model forced by spatially and temporally varying projected ice-melt fluxes from three sources: the Antarctic ice sheet, the Greenland Ice Sheet and small glaciers and ice caps. The largest ice melt flux we consider is equivalent to almost 0.7 m of global mean sea level rise over the 21st century. The temporal evolution of the dynamic sea level changes, in the presence of considerable variations in the ice melt flux, is also analysed. We find that the dynamic sea level change associated with the ice melt is small, with the largest changes occurring in the North Atlantic amounting to 3 cm above the global mean rise. Furthermore, the dynamic sea level change associated with the ice melt is similar regardless of whether the simulated ice fluxes are applied to a simulation with fixed CO2 or under a business-as-usual greenhouse gas warming scenario of increasing CO2.

Investigating the Group-Level Impact of Advanced Dual-Echo fMRI Combinations

Directory of Open Access Journals (Sweden)

Adam Kettinger

2016-12-01

Full Text Available Multi-echo fMRI data acquisition has been widely investigated and suggested to optimize sensitivity for detecting the BOLD signal. Several methods have also been proposed for the combination of data with different echo times. The aim of the present study was to investigate how these advance echo combination methods provide advantages over the simple averaging of echoes when state-of-the-art group-level random-effect analyses are performed. Both resting-state and task-based dual-echo fMRI data were collected from 27 healthy adult individuals (14 male, mean age = 25.75 years using standard echo-planar acquisition methods at 3T. Both resting-state and task-based data were subjected to a standard image pre-processing pipeline. Subsequently the two echoes were combined as a weighted average, using four different strategies for calculating the weights: (1 simple arithmetic averaging, (2 BOLD sensitivity weighting, (3 temporal-signal-to-noise ratio weighting and (4 temporal BOLD sensitivity weighting. Our results clearly show that the simple averaging of data with the different echoes is sufficient. Advanced echo combination methods may provide advantages on a single-subject level but when considering random-effects group level statistics they provide no benefit regarding sensitivity (i.e. group-level t-values compared to the simple echo-averaging approach. One possible reason for the lack of clear advantages may be that apart from increasing the average BOLD sensitivity at the single-subject level, the advanced weighted averaging methods also inflate the inter-subject variance. As the echo combination methods provide very similar results, the recommendation is to choose between them depending on the availability of time for collecting additional resting-state data or whether subject-level or group-level analyses are planned.

Additional safety assessment of ITER - Addition safety investigation of the INB ITER

International Nuclear Information System (INIS)

2012-01-01

This assessment aims at re-assessing safety margins in the light of events which occurred in Fukushima Daiichi, i.e. extreme natural events challenging the safety of installations. After a presentation of some characteristics of the ITER installation (location, activities, buildings, premise detritiation systems, electric supply, handling means, radioactive materials, chemical products, nuclear risks, specific risks), the report addresses the installation robustness by identifying cliff-edge effect risks which can be related to a loss of confinement of radioactive materials, explosions, a significant increase of exposure level, a possible effect on water sheets, and so on. The next part addresses the various aspects related to a seismic risk: installation sizing (assessment methodology, seismic risk characterization in Cadarache), sizing protection measures, installation compliance, and margin assessment. External flooding is the next addressed risk: installation sizing with respect to this specific risk, protection measures, installation compliance, margin assessment, and studied additional measures. Other extreme natural phenomena are considered (meteorological conditions, earthquake and flood) which may have effects on other installations (dam, canal). Then, the report addresses technical risks like the loss of electric supplies and cooling systems, the way a crisis is managed in terms of technical and human means and organization in different typical accidental cases. Subcontracting practices are also discussed. A synthesis proposes an overview of this additional safety assessment and discusses the impact which could have additional measures which could be implemented

Language and speech outcomes of children with hearing loss and additional disabilities: Identifying the variables that influence performance at 5 years of age

Science.gov (United States)

Cupples, Linda; Ching, Teresa Y.C.; Button, Laura; Leigh, Greg; Marnane, Vivienne; Whitfield, Jessica; Gunnourie, Miriam; Martin, Louise

2016-01-01

Objective This study examined language and speech outcomes in young children with hearing loss and additional disabilities. Design Receptive and expressive language skills and speech output accuracy were evaluated using direct assessment and caregiver report. Results were analysed first for the entire participant cohort, and then to compare results for children with hearing aids (HAs) versus cochlear implants (CIs). Study sample A population-based cohort of 146 5-year-old children with hearing loss and additional disabilities took part. Results Across all participants, multiple regressions showed that better language outcomes were associated with milder hearing loss, use of oral communication, higher levels of cognitive ability and maternal education, and earlier device fitting. Speech output accuracy was associated with use of oral communication only. Average outcomes were similar for children with HAs versus CIs, but their associations with demographic variables differed. For HA users, results resembled those for the whole cohort. For CI users, only use of oral communication and higher cognitive ability levels were significantly associated with better language outcomes. Conclusions The results underscore the importance of early device fitting for children with additional disabilities. Strong conclusions cannot be drawn for CI users given the small number of participants with complete data. PMID:27630013

Coalescent-based genome analyses resolve the early branches of the euarchontoglires.

Directory of Open Access Journals (Sweden)

Vikas Kumar

Full Text Available Despite numerous large-scale phylogenomic studies, certain parts of the mammalian tree are extraordinarily difficult to resolve. We used the coding regions from 19 completely sequenced genomes to study the relationships within the super-clade Euarchontoglires (Primates, Rodentia, Lagomorpha, Dermoptera and Scandentia because the placement of Scandentia within this clade is controversial. The difficulty in resolving this issue is due to the short time spans between the early divergences of Euarchontoglires, which may cause incongruent gene trees. The conflict in the data can be depicted by network analyses and the contentious relationships are best reconstructed by coalescent-based analyses. This method is expected to be superior to analyses of concatenated data in reconstructing a species tree from numerous gene trees. The total concatenated dataset used to study the relationships in this group comprises 5,875 protein-coding genes (9,799,170 nucleotides from all orders except Dermoptera (flying lemurs. Reconstruction of the species tree from 1,006 gene trees using coalescent models placed Scandentia as sister group to the primates, which is in agreement with maximum likelihood analyses of concatenated nucleotide sequence data. Additionally, both analytical approaches favoured the Tarsier to be sister taxon to Anthropoidea, thus belonging to the Haplorrhine clade. When divergence times are short such as in radiations over periods of a few million years, even genome scale analyses struggle to resolve phylogenetic relationships. On these short branches processes such as incomplete lineage sorting and possibly hybridization occur and make it preferable to base phylogenomic analyses on coalescent methods.

Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing

Science.gov (United States)

Mahbooba, Zaynab; West, Harvey; Harrysson, Ola; Wojcieszynski, Andrzej; Dehoff, Ryan; Nandwana, Peeyush; Horn, Timothy

2017-03-01

In additive manufacturing, microstructural control is feasible via processing parameter alteration. However, the window for parameter variation for certain materials, such as Ti-6Al-4V, is limited, and alternative methods must be employed to customize microstructures. Grain refinement and homogenization in cast titanium alloys has been demonstrated through the addition of hypoeutectic concentrations of boron. This work explores the influence of 0.00 wt.%, 0.25 wt.%, 0.50 wt.%, and 1.0 wt.% boron additions on the microstructure and bulk mechanical properties of Ti-6Al-4V samples fabricated in an Arcam A2 electron beam melting (EBM) system with commercial processing parameters for Ti-6Al-4V. Analyses of EBM fabricated Ti-6Al-4V + B indicate that the addition of 0.25-1.0 wt.% boron progressively refines the grain structure, and it improves hardness and elastic modulus. Despite a reduction in size, the β grain structure remained columnar as a result of directional heat transfer during EBM fabrication.

Reactor water level control device

International Nuclear Information System (INIS)

Hiramatsu, Yohei.

1980-01-01

Purpose: To increase the rapid response of the waterlevel control converting a reactor water level signal into a non-linear type, when the water level is near to a set value, to stabilize the water level reducting correlatively the reactor water level variation signal to stabilize greatly from the set value, and increasing the variation signal. Constitution: A main vapor flow quality transmitter detects the vapor flow generated in a reactor and introduced into a turbine. A feed water flow transmitter detects the quantity of a feed water flow from the turbine to the reactor, this detected value is sent to an addition operating apparatus. On the other hand, the power signal of the reactor water level transmitter is sent to the addition operating apparatus through a non-linear water level signal converter. The addition operation apparatus generates a signal for requesting the feed water flow quantity from both signals. Upon this occasion, the reactor water level signal converter makes small the reactor water level variation when the reactor level is close the set value, and when the water level deviates greatly from the set value, the reactor water level variation is made large thereby to improve the rapid response of the reactor coater level control. (Yoshino, Y.)

Role of cerium, lanthanum, and strontium additions in an Al-Si-Mg (A356) alloy

Energy Technology Data Exchange (ETDEWEB)

Nabawy, Ahmed M.; Samuel, Agnes M.; Samuel, Fawzy H. [Universite du Quebec, Chicoutimi (Canada). Dept. des Sciences Appliquees; Alkahtani, Saleh A.; Abuhasel, Khaled A. [Salman Bin Abdulaziz Univ., Riyadh (Saudi Arabia). Mechanical Engineering Dept.

2016-05-15

The effects of individual and combined additions of cerium (Ce), lanthanum (La), and strontium (Sr) on the eutectic modification and solidification characteristics of an Al-Si-Mg (A356) aluminum alloy were investigated using optical microscopy and thermal analysis techniques. Addition of Ce, La, and Sr resulted in different depression levels of the eutectic nucleation temperature and eutectic growth undercooling, generating modified eutectic structures exhibiting different levels of modification. Microstructural results showed that the best modification levels using individual additions were achieved by Sr which produced a fine fibrous eutectic structure, followed by La, which produced a refined lamellar structure, with Ce providing the lowest level of modification. On the other hand, a combined addition of Ce and Sr provided the highest modification level, with the production of a very fine fibrous eutectic silicon structure. In general, the addition of Sr helped to further increase the refinement obtained in the alloys containing La or Ce + La additions. In the latter alloy, the main intermetallic phases observed were La(Al,Si){sub 2} and Al{sub 20}(La,Ce)Ti{sub 2}Si. The improved modification levels were found to be proportional to the depression in the eutectic nucleation temperature and the eutectic growth undercooling. A high cooling rate also improved the modification level by at least one level.

Spatial Analyses of Harappan Urban Settlements

Directory of Open Access Journals (Sweden)

Hirofumi Teramura

2006-12-01

Full Text Available The Harappan Civilization occupies a unique place among the early civilizations of the world with its well planned urban settlements, advanced handicraft and technology, religious and trade activities. Using a Geographical Information Systems (GIS, this study presents spatial analyses that locate urban settlements on a digital elevation model (DEM according to the three phases of early, mature and late. Understanding the relationship between the spatial distribution of Harappan sites and the change in some factors, such as topographic features, river passages or sea level changes, will lead to an understanding of the dynamism of this civilization. It will also afford a glimpse of the factors behind the formation, development, and decline of the Harappan Civilization.

Toxicological and biochemical investigations in rats administered “kaun” (trona a natural food additive used in Nigeria

Directory of Open Access Journals (Sweden)

K.E. Imafidon

2016-12-01

Full Text Available Trona, a geological mineral, is often used as a natural food additive in many parts of Nigeria. This work was done to evaluate trona for metal content, acute toxicity and biochemical effects on vital organs such as the liver and the kidney. Consequently, graded doses of 10, 100, 1000, 1500 and 5000 mg trona per kg body weight were administered to determine their effects on body weight changes, relative organ weight, acute toxicity, liver and renal function indices and oxidative status of rats. Elemental analyses revealed the presence of high levels of sodium and iron, the presence of heavy metals such as cadmium, zinc and lead were also detected. There were losses in weights only at the 5000 mg/kg dose levels; relative liver and kidney weights were not affected. Acute toxicity tests recorded no mortality and no visible sign of toxicity. There were significant increases in ALT, AST and ALP activities at all dose levels except at the 10 mg/kg dose level. Liver MDA levels were significantly increased while catalase and SOD activities were significantly reduced in all the test rats compared with control. Kidney MDA levels were only affected at dose levels 5000 mg/kg; kidney SOD and catalase activities were not significantly affected. Creatinine, sodium and potassium levels were also not affected. These results show that trona may elicit toxic effects on the liver on prolonged administration, however no toxic effect was observed on the kidney within the duration of this study.

Evaluation of alternative chemical additives for high-level waste vitrification feed preparation processing

International Nuclear Information System (INIS)

Seymour, R.G.

1995-01-01

During the development of the feed processing flowsheet for the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS), research had shown that use of formic acid (HCOOH) could accomplish several processing objectives with one chemical addition. These objectives included the decomposition of tetraphenylborate, chemical reduction of mercury, production of acceptable rheological properties in the feed slurry, and controlling the oxidation state of the glass melt pool. However, the DEPF research had not shown that some vitrification slurry feeds had a tendency to evolve hydrogen (H 2 ) and ammonia (NH 3 ) as the result of catalytic decomposition of CHOOH with noble metals (rhodium, ruthenium, palladium) in the feed. Testing conducted at Pacific Northwest Laboratory and later at the Savannah River Technical Center showed that the H 2 and NH 3 could evolve at appreciable rates and quantities. The explosive nature of H 2 and NH 3 (as ammonium nitrate) warranted significant mitigation control and redesign of both facilities. At the time the explosive gas evolution was discovered, the DWPF was already under construction and an immediate hardware fix in tandem with flowsheet changes was necessary. However, the Hanford Waste Vitrification Plant (HWVP) was in the design phase and could afford to take time to investigate flowsheet manipulations that could solve the problem, rather than a hardware fix. Thus, the HWVP began to investigate alternatives to using HCOOH in the vitrification process. This document describes the selection, evaluation criteria, and strategy used to evaluate the performance of the alternative chemical additives to CHOOH. The status of the evaluation is also discussed

Perceived Statistical Knowledge Level and Self-Reported Statistical Practice Among Academic Psychologists

Directory of Open Access Journals (Sweden)

Laura Badenes-Ribera

2018-06-01

Full Text Available Introduction: Publications arguing against the null hypothesis significance testing (NHST procedure and in favor of good statistical practices have increased. The most frequently mentioned alternatives to NHST are effect size statistics (ES, confidence intervals (CIs, and meta-analyses. A recent survey conducted in Spain found that academic psychologists have poor knowledge about effect size statistics, confidence intervals, and graphic displays for meta-analyses, which might lead to a misinterpretation of the results. In addition, it also found that, although the use of ES is becoming generalized, the same thing is not true for CIs. Finally, academics with greater knowledge about ES statistics presented a profile closer to good statistical practice and research design. Our main purpose was to analyze the extension of these results to a different geographical area through a replication study.Methods: For this purpose, we elaborated an on-line survey that included the same items as the original research, and we asked academic psychologists to indicate their level of knowledge about ES, their CIs, and meta-analyses, and how they use them. The sample consisted of 159 Italian academic psychologists (54.09% women, mean age of 47.65 years. The mean number of years in the position of professor was 12.90 (SD = 10.21.Results: As in the original research, the results showed that, although the use of effect size estimates is becoming generalized, an under-reporting of CIs for ES persists. The most frequent ES statistics mentioned were Cohen's d and R2/η2, which can have outliers or show non-normality or violate statistical assumptions. In addition, academics showed poor knowledge about meta-analytic displays (e.g., forest plot and funnel plot and quality checklists for studies. Finally, academics with higher-level knowledge about ES statistics seem to have a profile closer to good statistical practices.Conclusions: Changing statistical practice is not

Partial-wave analyses of hadron scattering below 2 GeV

International Nuclear Information System (INIS)

Arndt, R.A.; Roper, L.D.

1990-01-01

The Center for Analysis of Particle Scattering (CAPS) in the Department of Physics at Virginia Polytechnic Institute and State University has analyzed basic two-body hadron reactions below 2 GeV for the last two decades. Reactions studied were nucleon-nucleon, pion-nucleon, K + -nucleon and pion photoproduction systems. In addition to analyses of these systems, a computer graphics system (SAID) has been developed and disseminated to over 200 research institutions using VAX computers. 8 refs

Effect of Additional Structure on Effective Stack Height of Gas Dispersion in Atmosphere

Directory of Open Access Journals (Sweden)

Takenobu Michioka

2016-03-01

Full Text Available Wind-tunnel experiments were conducted to evaluate the effect of additional structure (building, sea wall and banking on the effective stack height, which is usually used in safety analyses of nuclear power facilities in Japan. The effective stack heights were estimated with and without the additional structure in addition to the reactor building while varying several conditions such as the source height, the height of additional structure and the distance between the source position and the additional structure. When the source height is equivalent to the reactor building height, the additional structure enhances both the vertical and horizontal gas dispersion widths and decreases the ground gas concentration, and it means that the additional structure does not decrease the effective stack height. When the source height is larger than the reactor height, the additional structures might affect the effective stack height. As the distance between the source and the additional structure decreases, or as the height of the additional structure increases, the structure has a larger effect on the effective stack height.

MILROY, Lesley. Observing and Analysing Natural Language: A Critical Account of Sociolinguistic Method. Oxford: Basil Blackwell, 1987. 230pp. MILROY, Lesley. Observing and Analysing Natural Language: A Critical Account of Sociolinguistic Method. Oxford: Basil Blackwell, 1987. 230pp.

Directory of Open Access Journals (Sweden)

Iria Werlang Garcia

2008-04-01

Full Text Available Lesley Milroy's Observing and Analysing Natural Language is a recent addition to an ever growing number of publications in the field of Sociolinguistics. It carries the weight of one of the experienced authors in the current days in the specified field and should offer basic information to both newcomers and established investigators in natural language. Lesley Milroy's Observing and Analysing Natural Language is a recent addition to an ever growing number of publications in the field of Sociolinguistics. It carries the weight of one of the experienced authors in the current days in the specified field and should offer basic information to both newcomers and established investigators in natural language.

Higher- and Lower-Order Factor Analyses of the Temperament in Middle Childhood Questionnaire

Science.gov (United States)

Kotelnikova, Yuliya; Olino, Thomas M.; Klein, Daniel N.; Mackrell, Sarah V.M.; Hayden, Elizabeth P.

2017-01-01

The Temperament in Middle Childhood Questionnaire (TMCQ; Simonds & Rothbart, 2004) is a widely used parent-report measure of temperament. However, neither its lower- nor higher-order structures have been tested via a bottom-up, empirically based approach. We conducted higher- and lower-order exploratory factor analyses (EFAs) of the TMCQ in a large (N = 654) sample of 9-year-olds. Item-level EFAs identified 92 items as suitable (i.e., with loadings ≥.40) for constructing lower-order factors, only half of which resembled a TMCQ scale posited by the measure’s authors. Higher-order EFAs of the lower-order factors showed that a three-factor structure (Impulsivity/Negative Affectivity, Negative Affectivity, and Openness/Assertiveness) was the only admissible solution. Overall, many TMCQ items did not load well onto a lower-order factor. In addition, only three factors, which did not show a clear resemblance to Rothbart’s four-factor model of temperament in middle childhood, were needed to account for the higher-order structure of the TMCQ. PMID:27002124

Analyses of transient plant response under emergency situations

Energy Technology Data Exchange (ETDEWEB)

Koyama, Kazuya [Advanced Reactor Technology, Co. Ltd., Engineering Department, Tokyo (Japan); Shimakawa, Yoshio; Hishida, Masahiko [Mitsubishi Heavy Industry, Ltd., Reactor Core Engineering and Safety Engineering Department, Tokyo (Japan)

1999-03-01

In order to support development of the dynamic reliability analysis program DYANA, analyses were made on the event sequences anticipated under emergency situations using the plant dynamics simulation computer code Super-COPD. The analytical models were developed for Super-COPD such as the guard vessel, the maintenance cooling system, the sodium overflow and makeup system, etc. in order to apply the code to the simulation of the emergency situations. The input data were prepared for the analyses. About 70 sequences were analyzed, which are categorized into the following events: (1) PLOHS (Protected Loss of Heat Sink), (2) LORL (Loss of Reactor Level)-J: failure of sodium makeup by the primary sodium overflow and makeup system, (3) LORL-G : failure of primary coolant pump trip, (4) LORL-I: failure of the argon cover gas isolation, and (5) heat removal only using the ventilation system of the primary cooling system rooms. The results were integrated into an input file for preparing the functions for the neural network simulation. (author)

Reported parental characteristics in relation to trait depression and anxiety levels in a non-clinical group.

Science.gov (United States)

Parker, G

1979-09-01

Care and overprotection appear to reflect the principal dimensions underlying parental behaviours and attitudes. In previous studies of neurotically depressed patients and of a non-clinical group, subjects who scored their parents as lacking in care and/or overprotective had the greater depressive experience. The present study of another non-clinical group (289 psychology students) replicated those findings in regard to trait depression levels. In addition, associations between those parental dimensions and trait anxiety scores were demonstrated. Multiple regression analyses established that 9-10% of the variance in mood scores was accounted for by scores on those parental dimensions. Low maternal care scores predicted higher levels of both anxiety and depression, while high maternal overprotection scores predicted higher levels of anxiety but not levels of depression. Maternal influences were clearly of greater relevance than paternal influences.

Stability issues in reconstitution by weapon addition

Energy Technology Data Exchange (ETDEWEB)

Canavan, G.H.

1997-08-01

Reconstitution of strategic forces by the unilateral uploading of additional weapons from initially symmetric modest force levels reduces first strike stability. These changes are quantified and traced to changes in first and second strike costs in a model of missile exchanges in which both strikes are optimized analytically.

Predictive modelling of noise level generated during sawing of rocks

Indian Academy of Sciences (India)

This paper presents an experimental and statistical study on noise level generated during of rock sawing by circular diamond sawblades. Influence of the operating variables and rock properties on the noise level are investigated and analysed. Statistical analyses are then employed and models are built for the prediction of ...

Nitrogen-deprivation elevates lipid levels in Symbiodinium spp. by lipid droplet accumulation: morphological and compositional analyses.

Directory of Open Access Journals (Sweden)

Pei-Luen Jiang

Full Text Available Stable cnidarian-dinoflagellate (genus Symbiodinium endosymbioses depend on the regulation of nutrient transport between Symbiodinium populations and their hosts. It has been previously shown that the host cytosol is a nitrogen-deficient environment for the intracellular Symbiodinium and may act to limit growth rates of symbionts during the symbiotic association. This study aimed to investigate the cell proliferation, as well as ultrastructural and lipid compositional changes, in free-living Symbiodinium spp. (clade B upon nitrogen (N-deprivation. The cell proliferation of the N-deprived cells decreased significantly. Furthermore, staining with a fluorescent probe, boron dipyrromethane 493/503 (BODIPY 493/503, indicated that lipid contents progressively accumulated in the N-deprived cells. Lipid analyses further showed that both triacylglycerol (TAG and cholesterol ester (CE were drastically enriched, with polyunsaturated fatty acids (PUFA; i.e., docosahexaenoic acid, heneicosapentaenoic acid, and oleic acid became more abundant. Ultrastructural examinations showed that the increase in concentration of these lipid species was due to the accumulation of lipid droplets (LDs, a cellular feature that have previously shown to be pivotal in the maintenance of intact endosymbioses. Integrity of these stable LDs was maintained via electronegative repulsion and steric hindrance possibly provided by their surface proteins. Proteomic analyses of these LDs identified proteins putatively involved in lipid metabolism, signaling, stress response and energy metabolism. These results suggest that LDs production may be an adaptive response that enables Symbiodinium to maintain sufficient cellular energy stores for survival under the N-deprived conditions in the host cytoplasm.

Stuttering, induced fluency, and natural fluency: a hierarchical series of activation likelihood estimation meta-analyses.

Science.gov (United States)

Budde, Kristin S; Barron, Daniel S; Fox, Peter T

2014-12-01

Developmental stuttering is a speech disorder most likely due to a heritable form of developmental dysmyelination impairing the function of the speech-motor system. Speech-induced brain-activation patterns in persons who stutter (PWS) are anomalous in various ways; the consistency of these aberrant patterns is a matter of ongoing debate. Here, we present a hierarchical series of coordinate-based meta-analyses addressing this issue. Two tiers of meta-analyses were performed on a 17-paper dataset (202 PWS; 167 fluent controls). Four large-scale (top-tier) meta-analyses were performed, two for each subject group (PWS and controls). These analyses robustly confirmed the regional effects previously postulated as "neural signatures of stuttering" (Brown, Ingham, Ingham, Laird, & Fox, 2005) and extended this designation to additional regions. Two smaller-scale (lower-tier) meta-analyses refined the interpretation of the large-scale analyses: (1) a between-group contrast targeting differences between PWS and controls (stuttering trait); and (2) a within-group contrast (PWS only) of stuttering with induced fluency (stuttering state). Copyright © 2014 Elsevier Inc. All rights reserved.

Evaluation of polymer micro parts produced by additive manufacturing processes using vat photopolymerization method

DEFF Research Database (Denmark)

Davoudinejad, Ali; Pedersen, David Bue; Tosello, Guido

2017-01-01

Micro manufacturing scale feature production by Additive Manufacturing (AM) processes for the direct production of miniaturized polymer components is analysed in this work. The study characterizes the AM processes for polymer micro parts productions using the vat photopolymerization method...

Childhood Socioeconomic Position and Objectively Measured Physical Capability Levels in Adulthood: A Systematic Review and Meta-Analysis

DEFF Research Database (Denmark)

Birnie, Kate; Cooper, Rachel; Martin, Richard M

2011-01-01

for 5s of 1.26 (1.02, 1.55). Adjustment for the potential mediating factors, adult SEP and body size attenuated associations greatly. However, despite this attenuation, for walking speed and chair rise time, there was still evidence of moderate associations. CONCLUSIONS: Policies targeting socioeconomic...... achieved in early adulthood, thereby affecting levels in later adulthood. We have undertaken a systematic review with meta-analyses to test the hypothesis that adverse childhood SEP is associated with lower levels of objectively measured physical capability in adulthood. METHODS AND FINDINGS: Relevant...... inequalities in childhood may have additional benefits in promoting the maintenance of independence in later life....

Effect of mode of addition of flaxseed oil on the quality characteristics of chicken sausage containing vitamin E and omega 3 fatty acids at levels to support a health claim.

Science.gov (United States)

Bolger, Zara; Brunton, Nigel P; Monahan, Frank J

2017-10-18

Vitamin E and omega-3 fatty acids can be incorporated into meat products at levels supporting health claims of "protecting against oxidative stress" and "maintaining normal blood cholesterol levels", respectively. Chicken sausages were formulated to contain vitamin E (12 mg per 100 g) and flaxseed oil (2 g per 100 g) using different oil incorporation methods. The formulations were: (1) control (no oil); (2) oil; (3) emulsified oil; (4) freeze-dried encapsulated oil; (5) freeze-dried encapsulated oil with cross-linker genipin; (6) spray-dried encapsulated oil. α-Linolenic acid and α-tocopherol were retained in all fortified formulations at levels to meet nutrient and health claims but emulsification or encapsulation had no additional benefit in retention following cooking or on product quality as measured by proximate composition, lipid oxidation, colour, microbial analysis, cook loss and texture profile analysis. While the addition of flaxseed oil had a negative effect on consumer acceptance of flavour (although not when emulsified), overall acceptance of the chicken sausages was only reduced significantly (p ≤ 0.05) when oil was encapsulated.

TG/FT-IR characterization of additives typically employed in EPDM formulations

Directory of Open Access Journals (Sweden)

Natália Beck Sanches

2015-06-01

Full Text Available AbstractThermogravimetric analysis coupled to Fourier transform infrared spectroscopy (TG/FT-IR is a very popular technique for rubbers characterization. It involves analyses of the base polymer and additives. Ethylene–propylene–diene (EPDM rubbers are frequently investigated by TG/FT-IR; however, the focus has been the degradation temperature range of the polymer. In this study, unvulcanized and vulcanized EPDM rubber and its additives were investigated by TG/FT-IR, without solvent extraction, and in a wide temperature range. Initially, the additives were individually characterized. TG/FT-IR identified the characteristic groups of all the additives analyzed and distinguished them from each other. Afterwards, unvulcanized and vulcanized EPDM rubbers were investigated without prior extraction.TG/FT-IR detected absorptions due to the additives tetramethylthiuram monosulfide and 2-mercaptobenzothiazole. Both of these sulfur-containing additives were present in the EPDM formulation at concentrations of 0.7 phr (0.63 wt %. The TG/FT-IR technique had some limitations, because not all the additives in EPDM rubber were detected. Paraffin oil, stearic acid and 2,2,4-trimethyl-1,2-dihydroquinoline functional groups were not observed in either the unvulcanized or vulcanized EPDM. Nevertheless, in addition to the ability of this method to detect sulfur-containing groups, the lack of a pre-extraction reduces the time and effort required for additive analysis in rubbers.

Item-level and subscale-level factoring of Biggs' Learning Process Questionnaire (LPQ) in a mainland Chinese sample.

Science.gov (United States)

Sachs, J; Gao, L

2000-09-01

The learning process questionnaire (LPQ) has been the source of intensive cross-cultural study. However, an item-level factor analysis of all the LPQ items simultaneously has never been reported. Rather, items within each subscale have been factor analysed to establish subscale unidimensionality and justify the use of composite subscale scores. It was of major interest to see if the six logically constructed items groups of the LPQ would be supported by empirical evidence. Additionally, it was of interest to compare the consistency of the reliability and correlational structure of the LPQ subscales in our study with those of previous cross-cultural studies. Confirmatory factor analysis was used to fit the six-factor item level model and to fit five representative subscale level factor models. A total of 1070 students between the ages of 15 to 18 years was drawn from a representative selection of 29 classes from within 15 secondary schools in Guangzhou, China. Males and females were almost equally represented. The six-factor item level model of the LPQ seemed to fit reasonably well, thus supporting the six dimensional structure of the LPQ and justifying the use of composite subscale scores for each LPQ dimension. However, the reliability of many of these subscales was low. Furthermore, only two subscale-level factor models showed marginally acceptable fit. Substantive considerations supported an oblique three-factor model. Because the LPQ subscales often show low internal consistency reliability, experimental and correlational studies that have used these subscales as dependent measures have been disappointing. It is suggested that some LPQ items should be revised and other items added to improve the inventory's overall psychometric properties.

Play Equipment, Physical Activity Opportunities, and Children's Activity Levels at Childcare

Directory of Open Access Journals (Sweden)

Jessica S. Gubbels

2012-01-01

Full Text Available This study investigated the association between physical activity facilities at childcare (e.g., play equipment and physical activity of 2- and 3-year olds. Observations of physical activity intensity were performed among 175 children at 9 childcare centers in The Netherlands, using the OSRAC-P. The physical activity facilities were assessed for indoors and outdoors separately, using the EPAO instrument. Regular (single-level multivariate and multilevel linear regression analyses examined the association of the facilities and child characteristics (age and sex with children's activity levels. Various physical activity facilities were available in all childcare centers (e.g., balls. Riding toys and a small playing area were associated with lower indoor physical activity levels. Outdoor physical activity levels were positively associated with the availability of portable jumping equipment and the presence of a structured track on the playground. Portable slides, fixed swinging equipment, and sandboxes were negatively associated with outdoor activity levels. In addition, the 3-year old children were more active outdoors than the 2-year olds. In conclusion, not all physical activity facilities at childcare were indeed positively associated with children's activity levels. The current findings provide concrete leads for childcare providers regarding which factors they can improve in the physical environment to facilitate children's physical activity.

Effect of Fuel Additives on Spray Performance of Alternative Jet Fuels

Science.gov (United States)

Kannaiyan, Kumaran; Sadr, Reza

2015-11-01

Role of alternative fuels on reducing the combustion pollutants is gaining momentum in both land and air transport. Recent studies have shown that addition of nanoscale metal particles as fuel additives to liquid fuels have a positive effect not only on their combustion performance but also in reducing the pollutant formation. However, most of those studies are still in the early stages of investigation with the addition of nanoparticles at low weight percentages. Such an addition can affect the hydrodynamic and thermo-physical properties of the fuel. In this study, the near nozzle spray performance of gas-to-liquid jet fuel with and without the addition of alumina nanoparticles are investigated at macro- and microscopic levels using optical diagnostic techniques. At macroscopic level, the addition of nanoparticles is seen to enhance the sheet breakup process when compared to that of the base fuel. Furthermore, the microscopic spray characteristics such as droplet size and velocity are also found to be affected. Although the addition of nanoscale metal particles at low weight percentages does not affect the bulk fluid properties, the atomization process is found to be affected in the near nozzle region. Funded by Qatar National Research Fund.

Correlation of analysis with high level vibration test results for primary coolant piping

International Nuclear Information System (INIS)

Park, Y.J.; Hofmayer, C.H.; Costello, J.F.

1992-01-01

Dynamic tests on a modified 1/2.5-scale model of pressurized water reactor (PWR) primary coolant piping were performed using a large shaking table at Tadotsu, Japan. The High Level Vibration Test (HLVT) program was part of a cooperative study between the United States (Nuclear Regulatory Commission/Brookhaven National Laboratory, NRC/BNL) and Japan (Ministry of International Trade and Industry/Nuclear Power Engineering Center). During the test program, the excitation level of each test run was gradually increased up to the limit of the shaking table and significant plastic strains, as well as cracking, were induced in the piping. To fully utilize the test results, NRC/BNL sponsored a project to develop corresponding analytical predictions for the nonlinear dynamic response of the piping for selected test runs. The analyses were performed using both simplified and detailed approaches. The simplified approaches utilize a linear solution and an approximate formulation for nonlinear dynamic effects such as the use of a deamplification factor. The detailed analyses were performed using available nonlinear finite element computer codes, including the MARC, ABAQUS, ADINA and WECAN codes. A comparison of various analysis techniques with the test results shows a higher prediction error in the detailed strain values in the overall response values. A summary of the correlation analyses was presented before the BNL. This paper presents a detailed description of the various analysis results and additional comparisons with test results

A first screening and risk assessment of pharmaceuticals and additives in personal care products in waste water, sludge, recipient water and sediment from Faroe Islands, Iceland and Greenland.

Science.gov (United States)

Huber, Sandra; Remberger, Mikael; Kaj, Lennart; Schlabach, Martin; Jörundsdóttir, Hrönn Ó; Vester, Jette; Arnórsson, Mímir; Mortensen, Inge; Schwartson, Richard; Dam, Maria

2016-08-15

A screening of a broad range of pharmaceuticals and additives in personal care products (PPCPs) in sub-arctic locations of the Faroe Islands (FO), Iceland (IS) and Greenland (GL) was conducted. In total 36 pharmaceuticals including some metabolites, and seven additives in personal care products were investigated in influent and effluent waters as well as sludge of waste water treatment plants (WWTPs) and in water and sediment of recipients. Concentrations and distribution patterns for PPCPs discharged via sewage lines (SLs) to the marine environment were assessed. Of the 36 pharmaceuticals or metabolites analysed 33 were found close to or above the limit of detection (LOD) in all or a part of the samples. All of the seven investigated additives in personal care products were detected above the LOD. Some of the analysed PPCPs occurred in every or almost every sample. Among these were diclofenac, ibuprofen, lidocaine, naproxen, metformin, citalopram, venlafaxine, amiloride, furosemide, metoprolol, sodium dodecyl sulphate (SDS) and cetrimonium salt (ATAC-C16). Additionally, the study encompasses ecotoxicological risk assessment of 2/3 of the analysed PPCPs in recipient and diluted effluent waters. For candesartan only a small margin to levels with inacceptable risks was observed in diluted effluent waters at two locations (FO). Chronical risks for aquatic organisms staying and/or living around WWTP effluent pipe-outlets were indicated for 17β-estradiol and estriol in the three countries. Additives in PCPs were found to pose the largest risk to the aquatic environment. The surfactants CAPB and ATAC-C16 were found in concentrations resulting in risk factors up to 375 for CAPB and 165 for ATAC-C16 in recipients for diluted effluents from Iggia, Nuuk (GL) and Torshavn (FO) respectively. These results demonstrates a potentially high ecological risk stemming from discharge of surfactants as used in household and industrial detergents as well as additives in personal care

Comparison of elastic and inelastic analyses

International Nuclear Information System (INIS)

Ammerman, D.J.; Heinstein, M.W.; Wellman, G.W.

1992-01-01

The use of inelastic analysis methods instead of the traditional elastic analysis methods in the design of radioactive material (RAM) transport packagings leads to a better understanding of the response of the package to mechanical loadings. Thus, better assessment of the containment, thermal protection, and shielding integrity of the package after a structure accident event can be made. A more accurate prediction of the package response can lead to enhanced safety and also allow for a more efficient use of materials, possibly leading to a package with higher capacity or lower weight. This paper discusses the advantages and disadvantages of using inelastic analysis in the design of RAM shipping packages. The use of inelastic analysis presents several problems to the package designer. When using inelastic analysis the entire nonlinear response of the material must be known, including the effects of temperature changes and strain rate. Another problem is that there currently is not an acceptance criteria for this type of analysis that is approved by regulatory agencies. Inelastic analysis acceptance criteria based on failure stress, failure strain , or plastic energy density could be developed. For both elastic and inelastic analyses it is also important to include other sources of stress in the analyses, such as fabrication stresses, thermal stresses, stresses from bolt preloading, and contact stresses at material interfaces. Offsetting these added difficulties is the improved knowledge of the package behavior. This allows for incorporation of a more uniform margin of safety, which can result in weight savings and a higher level of confidence in the post-accident configuration of the package. In this paper, comparisons between elastic and inelastic analyses are made for a simple ring structure and for a package to transport a large quantity of RAM by rail (rail cask) with lead gamma shielding to illustrate the differences in the two analysis techniques

Antiwear and antioxidant studies of cardanol phosphate ester additives

Energy Technology Data Exchange (ETDEWEB)

Mazzetto, S.E.; Oliveira, L.D.M.; Lomonaco, D.; Veloso, P.A., E-mail: selma@ufc.br [Lab. de Produtos e Tecnologia em Processos (LPT), Dept. de Quimica Organica e Inorganica, Universidade Federal do Ceara, Fortaleza, CE (Brazil)

2012-07-15

In the search for new applications and products derived from Cashew Nut Shell Liquid (CNSL), we report herein the synthesis and characterization (GC/MS and {sup 1}H, {sup 13}C, and {sup 31}P NMR) of four phosphate esters derived from hydrogenated cardanol, including their applications as antiwear additives for diesel (S500) and as antioxidant additives for mineral oils, evaluated through the HFRR test and oxidative stability analyses, respectively. The results obtained showed very good to excellent performances promoted by the bioadditives evaluated, especially for the thiophosphorylated derivative, which notably reduced the sludge residue and the acidity index of the oxidized oil (0.52 mg NaOH/g sample) and also improved the diesel lubricity, reducing the wear of metal parts by more than 50% (330 {Mu}m). Keywords: Cardanol; Antiwear; Antioxidant; Diesel; Mineral oil. (author)

Additional methodology development for statistical evaluation of reactor safety analyses

International Nuclear Information System (INIS)

Marshall, J.A.; Shore, R.W.; Chay, S.C.; Mazumdar, M.

1977-03-01

The project described is motivated by the desire for methods to quantify uncertainties and to identify conservatisms in nuclear power plant safety analysis. The report examines statistical methods useful for assessing the probability distribution of output response from complex nuclear computer codes, considers sensitivity analysis and several other topics, and also sets the path for using the developed methods for realistic assessment of the design basis accident

Additives for rapeseed oil fuel. Influence on the exhaust gas emissions

Energy Technology Data Exchange (ETDEWEB)

Kastl, Johannes; Remmele, Edgar; Thuneke, Klaus [Technologie- und Foerderzentrum, Straubing (Germany)

2013-06-01

In contrast to fossil diesel fuel, the use of additives is not common in rapeseed oil fuel. In a preceding research project the efficacy of several additives, that are commercially available for the use in fossil diesel or FAME, has been investigated for rapeseed oil fuel in the lab. Four additives could be identified, which have a significant influence on the ignition delay or the low temperature flow behaviour of rapeseed oil fuel. To investigate whether there are negative effects of the additives on other fuel-related properties in practical use, a test series on an agricultural tractor capable of running on vegetable oils has been conducted. Attention is focused on the operating parameters like power, torque or fuel consumption as well as on regulated emissions (CO, HC, particulate matter or NOx) and non-regulated emissions like polycyclic aromatic hydrocarbons. Additionally, the influence of the additives on the storage stability of rapeseed oil fuel is investigated in long term studies. No negative influence of the additives on the regulated emissions could be seen in the experiments, the data of the non-regulated emissions is still being analysed. This paper will focus on the emissions testing; results of the long term studies will be given in the presentation. (orig.)

Effects of arginine and phytogenic additive supplementation on performance and health of brown-egg layers

Directory of Open Access Journals (Sweden)

Vitor Barbosa Fascina

Full Text Available ABSTRACT This study was performed to evaluate the effects of the association of different digestible arginine and phytogenic additive dietary levels on performance and health status of brown-egg layers. In this study, a total of 504 33-week-old Hisex Brown layers were distributed into a completely randomized experimental design to a 4 × 3 factorial arrangement (dietary digestible arginine levels: 880, 968, 1056, or 1144 mg/kg of feed × phytogenic additive levels: 0, 100, and 200 mg/kg of feed with six replicate cages of seven birds per cage. The phytogenic additive was composed of extracts of Baccharis dracunculifolia (40%, Astragalus membranaceus lipopolysaccharides (20%, cinnamon, and grape seed (20%. Feed intake was reduced when diets containing 1056 mg of arginine were supplemented with 100 or 200 mg phytogenic additive per kg. Feed conversion ratio was improved when diets were supplemented with 100 mg of phytogenic additive or with 1056 mg of arginine per kg of feed. Egg mass was increased when diets were supplemented with 1056 mg arginine per kg of feed. Arginine supplementation quadratically increased albumen percentage and reduced yolk percentage. Higher arginine and phytogenic additive levels reduced heterophyl:lymphocyte ratio and blood uric acid, total cholesterol, very-low density lipoprotein, and triglyceride levels. Dietary supplementation of 100 mg of phytogenic additive associated with high arginine levels increased nitric oxide production by peritoneal macrophages and 1056 mg of arginine increased antibodies titers against Newcastle disease virus. Blood and intestinal malonaldehyde levels were reduced when 200 mg of the phytogenic additive was added. Dietary supplementation of 968 mg of arginine or 100 mg of a phytogenic additive (40% Baccharis dracunculifolia, 20% Astragalus membranaceus, 20% cinnamon, and 20% grape seed extracts per kilogram of diet improves the feed conversion ratio and associated inclusion of 1144 mg of

A case against bio markers as they are currently used in radioecological risk analyses: a problem of linkage

International Nuclear Information System (INIS)

Hinton, T.G.; Brechignac, F.

2005-01-01

Bio-markers are successfully used in human risk analyses as early indicators of contaminant exposure and predictors of deleterious effects. This has boosted the search for bio-markers in determining ecological risks to non-human biota, and particularly for assessments related to radioactive contaminants. There are difficulties, however, that prevent an easy transfer of the bio-marker concept from humans to non-human biota, as there are significant differences in endpoints of concern, units of observation and dose response relationships between human and ecological risk analyses. The use of bio-markers in ecological risk analyses currently lacks a linkage between molecular-level effects and quantifiable impacts observed in individuals and populations. This is important because ecological risk analyses generally target the population level of biological organisation. We highlight various examples that demonstrate the difficulties of linking individual responses to population-level impacts, such as indirect effects and compensatory interactions. Eco-toxicologists cope with such difficulties through the use of uncertainty or extrapolation factors. Extrapolation factors (EF) typically range from 1 to 1000 when linking effects observed in individuals to those predicted to occur in populations. We question what magnitude of EF will be required when going from a molecular level effect, measured by a bio-marker, all the way up to the population level of biological organisation. Particularly, we stress that a successful application of bio-markers to radioecological risk assessment can only be achieved once the connection has been made between changes in individual resource allocation-based life histories and population dynamics. This clearly emphasises the need to quantify the propagation of molecular and cellular level effects to higher levels of biological organisation, especially in the long-term via several generations of exposure. Finally, we identify pertinent research

Disagreements in meta-analyses using outcomes measured on continuous or rating scales: observer agreement study

DEFF Research Database (Denmark)

Tendal, Britta; Higgins, Julian P T; Jüni, Peter

2009-01-01

difference (SMD), the protocols for the reviews and the trial reports (n=45) were retrieved. DATA EXTRACTION: Five experienced methodologists and five PhD students independently extracted data from the trial reports for calculation of the first SMD result in each review. The observers did not have access...... to the reviews but to the protocols, where the relevant outcome was highlighted. The agreement was analysed at both trial and meta-analysis level, pairing the observers in all possible ways (45 pairs, yielding 2025 pairs of trials and 450 pairs of meta-analyses). Agreement was defined as SMDs that differed less...... than 0.1 in their point estimates or confidence intervals. RESULTS: The agreement was 53% at trial level and 31% at meta-analysis level. Including all pairs, the median disagreement was SMD=0.22 (interquartile range 0.07-0.61). The experts agreed somewhat more than the PhD students at trial level (61...

Swiss-Slovak cooperation program: a training strategy for safety analyses

International Nuclear Information System (INIS)

Husarcek, J.

2000-01-01

During the 1996-1999 period, a new training strategy for safety analyses was implemented at the Slovak Nuclear Regulatory Authority (UJD) within the Swiss-Slovak cooperation programme in nuclear safety (SWISSLOVAK). The SWISSLOVAK project involved the recruitment, training, and integration of the newly established team into UJD's organizational structure. The training strategy consisted primarily of the following two elements: a) Probabilistic Safety Analysis (PSA) applications (regulatory review and technical evaluation of Level-1/Level-2 PSAs; PSA-based operational events analysis, PSA applications to assessment of Technical Specifications; and PSA-based hardware and/or procedure modifications) and b) Deterministic accident analyses (analysis of accidents and regulatory review of licensee Safety Analysis Reports; analysis of severe accidents/radiological releases and the potential impact of the containment and engineered safety systems, including the development of technical bases for emergency response planning; and application of deterministic methods for evaluation of accident management strategies/procedure modifications). The paper discusses the specific aspects of the training strategy performed at UJD in both the probabilistic and deterministic areas. The integration of team into UJD's organizational structure is described and examples of contributions of the team to UJD's statutory responsibilities are provided. (author)

A comparative study of cold- and warm-adapted Endonucleases A using sequence analyses and molecular dynamics simulations.

Directory of Open Access Journals (Sweden)

Davide Michetti

Full Text Available The psychrophilic and mesophilic endonucleases A (EndA from Aliivibrio salmonicida (VsEndA and Vibrio cholera (VcEndA have been studied experimentally in terms of the biophysical properties related to thermal adaptation. The analyses of their static X-ray structures was no sufficient to rationalize the determinants of their adaptive traits at the molecular level. Thus, we used Molecular Dynamics (MD simulations to compare the two proteins and unveil their structural and dynamical differences. Our simulations did not show a substantial increase in flexibility in the cold-adapted variant on the nanosecond time scale. The only exception is a more rigid C-terminal region in VcEndA, which is ascribable to a cluster of electrostatic interactions and hydrogen bonds, as also supported by MD simulations of the VsEndA mutant variant where the cluster of interactions was introduced. Moreover, we identified three additional amino acidic substitutions through multiple sequence alignment and the analyses of MD-based protein structure networks. In particular, T120V occurs in the proximity of the catalytic residue H80 and alters the interaction with the residue Y43, which belongs to the second coordination sphere of the Mg2+ ion. This makes T120V an amenable candidate for future experimental mutagenesis.

Bit-level quantum color image encryption scheme with quantum cross-exchange operation and hyper-chaotic system

Science.gov (United States)

Zhou, Nanrun; Chen, Weiwei; Yan, Xinyu; Wang, Yunqian

2018-06-01

In order to obtain higher encryption efficiency, a bit-level quantum color image encryption scheme by exploiting quantum cross-exchange operation and a 5D hyper-chaotic system is designed. Additionally, to enhance the scrambling effect, the quantum channel swapping operation is employed to swap the gray values of corresponding pixels. The proposed color image encryption algorithm has larger key space and higher security since the 5D hyper-chaotic system has more complex dynamic behavior, better randomness and unpredictability than those based on low-dimensional hyper-chaotic systems. Simulations and theoretical analyses demonstrate that the presented bit-level quantum color image encryption scheme outperforms its classical counterparts in efficiency and security.

Precise Chemical Analyses of Planetary Surfaces

Science.gov (United States)

Kring, David; Schweitzer, Jeffrey; Meyer, Charles; Trombka, Jacob; Freund, Friedemann; Economou, Thanasis; Yen, Albert; Kim, Soon Sam; Treiman, Allan H.; Blake, David;

Effects of calcium hydroxide addition on the physical and chemical properties of a calcium silicate-based sealer.

Science.gov (United States)

Kuga, Milton Carlos; Duarte, Marco Antonio Hungaro; Sant'anna-Júnior, Arnaldo; Keine, Kátia Cristina; Faria, Gisele; Dantas, Andrea Abi Rached; Guiotti, Flávia Angélica

2014-06-01

Recently, various calcium silicate-based sealers have been introduced for use in root canal filling. The MTA Fillapex is one of these sealers, but some of its physicochemical properties are not in accordance with the ISO requirements. The aim of this study was to evaluate the flowability, pH level and calcium release of pure MTA Fillapex (MTAF) or containing 5% (MTAF5) or 10% (MTAF10) calcium hydroxide (CH), in weight, in comparison with AH Plus sealer. The flowability test was performed according to the ISO 6876:2001 requirements. For the pH level and calcium ion release analyses, the sealers were placed individually (n=10) in plastic tubes and immersed in deionized water. After 24 hours, 7 and 14 days, the water in which each specimen had been immersed was evaluated to determine the pH level changes and calcium released. Flowability, pH level and calcium release data were analyzed statistically by the ANOVA test (α=5%). In relation to flowability: MTAF>AH Plus>MTAF5>MTAF10. In relation to the pH level, for 24 h: MTAF5=MTAF10=MTAF>AH Plus; for 7 and 14 days: MTAF5=MTAF10>MTAF>AH Plus. For the calcium release, for all periods: MTAF>MTAF5=MTAF10>AH Plus. The addition of 5% CH to the MTA Fillapex (in weight) is an alternative to reduce the high flowability presented by the sealer, without interfering in its alkalization potential.

Multivariate differential analyses of adolescents' experiences of aggression in families

Directory of Open Access Journals (Sweden)

Chris Myburgh

2011-01-01

Full Text Available Aggression is part of South African society and has implications for the mental health of persons living in South Africa. If parents are aggressive adolescents are also likely to be aggressive and that will impact negatively on their mental health. In this article the nature and extent of adolescents' experiences of aggression and aggressive behaviour in the family are investigated. A deductive explorative quantitative approach was followed. Aggression is reasoned to be dependent on aspects such as self-concept, moral reasoning, communication, frustration tolerance and family relationships. To analyse the data from questionnaires of 101 families (95 adolescents, 95 mothers and 91 fathers Cronbach Alpha, various consecutive first and second order factor analyses, correlations, multiple regression, MANOVA, ANOVA and Scheffè/ Dunnett tests were used. It was found that aggression correlated negatively with the independent variables; and the correlations between adolescents and their parents were significant. Regression analyses indicated that different predictors predicted aggression. Furthermore, differences between adolescents and their parents indicated that the experienced levels of aggression between adolescents and their parents were small. Implications for education are given.

Towards a theoretical framework for analysing organisational processes

DEFF Research Database (Denmark)

Rocha, Robson Silva

2003-01-01

In this paper, I discuss how a theoretical framework can be build to analyse socialprocesses of transformation, making the link between macro and micro processes, inwhich this dichotomy can be overcome. The aim of this theoretical framework is toaccount for the transformation in societal...... characteristics and changes in actors' strategiesat micro level, in a way that links macro changes and micro processes - the cognitivestructures of the individual and social structures of the society. In order to build this framework, I draw from the figuration sociology of Norbert Elias, the praxeologia of...

Investigating Students’ Development of Learning Integer Concept and Integer Addition

Directory of Open Access Journals (Sweden)

Nenden Octavarulia Shanty

2016-09-01

Full Text Available This research aimed at investigating students’ development of learning integer concept and integer addition. The investigation was based on analyzing students’ works in solving the given mathematical problems in each instructional activity designed based on Realistic Mathematics Education (RME levels. Design research was chosen to achieve and to contribute in developing a local instruction theory for teaching and learning of integer concept and integer addition. In design research, the Hypothetical Learning Trajectory (HLT plays important role as a design and research instrument. It was designed in the phase of preliminary design and tested to three students of grade six OASIS International School, Ankara – Turkey. The result of the experiments showed that temperature in the thermometer context could stimulate students’ informal knowledge of integer concept. Furthermore, strategies and tools used by the students in comparing and relating two temperatures were gradually be developed into a more formal mathematics. The representation of line inside thermometer which then called the number line could bring the students to the last activity levels, namely rules for adding integer, and became the model for more formal reasoning. Based on these findings, it can be concluded that students’ learning integer concept and integer addition developed through RME levels.Keywords: integer concept, integer addition, Realistic Mathematics Education DOI: http://dx.doi.org/10.22342/jme.7.2.3538.57-72

Influence of lead oxide addition on LnTiTaO6 (Ln = Ce, Pr and Nd) microwave ceramics

International Nuclear Information System (INIS)

Padma Kumar, H.; Thomas, J.K.; John, Annamma; Solomon, Sam

2011-01-01

The effect of PbO addition on the structural, processing and microwave dielectric properties of LnTiTaO 6 (Ln = Ce, Pr and Nd) ceramics are reported. Conventional solid state ceramic route was used for the preparation of samples. Phase pure LnTiTaO 6 (Ln = Ce, Pr and Nd) ceramics are prepared at a calcination temperature of 1300 deg C. The samples are sintered at optimized temperatures. Addition of PbO reduces the sintering temperature. The crystal structure of the materials was analysed using X-ray diffraction techniques and the surface morphology of the sintered samples was analysed using scanning electron microscopy. The dielectric constant at microwave frequency range decreases for higher PbO addition for all the samples but the quality factor improves on small PbO addition. The thermal stability of resonant frequency was also improved with PbO addition on all the systems. A number of samples with improved microwave dielectric properties were obtained on all the systems suitable for practical applications. (author)

Analysing the breakthrough of rock 'n' roll (1930-1970) : multi-regime interaction and reconfiguration in the multi-level perspective

NARCIS (Netherlands)

Geels, F.W.

2007-01-01

The breakthrough of rock ‘n’ roll was part of broader transformations in the American music industry, involving changes in music instruments, music recording technology, audiences, radio programming and music styles. These transformations will be analysed as sociotechnical transition, using the

Single-Level and Multilevel Mediation Analysis

Science.gov (United States)

Tofighi, Davood; Thoemmes, Felix

2014-01-01

Mediation analysis is a statistical approach used to examine how the effect of an independent variable on an outcome is transmitted through an intervening variable (mediator). In this article, we provide a gentle introduction to single-level and multilevel mediation analyses. Using single-level data, we demonstrate an application of structural…

Job attitudes among workers with disabilities: The importance of family support in addition to organizational support.

Science.gov (United States)

Pérez, Vanesa; Alcover, Carlos-María; Chambel, Maria José

2015-01-01

In the case of workers with disabilities, family support is often essential to gain access to the labor market and achieve personal autonomy and financial independence, in addition to fostering job satisfaction and permanence in the organization. Moreover, the support offered by organizations is particularly valued by workers with disabilities, as the organizations that hire such people generally go to considerable lengths to ensure their adaptation and integration in the workplace, contributing to job satisfaction and permanence in the organization. The aim of this study is to investigate the relationships between organizational support and family support with job satisfaction and intention to quit the organization among workers with disabilities employed in ordinary firms. Our study surveyed 204 workers using a questionnaire, and we used Structural Equation Modeling (SEM) analyses to test these relationships. Our results show that organizational support is a significant explanatory factor in the levels of job satisfaction. Moreover, our results indicate that the participants perceived high levels of support from their families, facilitating the conciliation of work and family life. Our results have practical implications in order to improve full integration and normalization of workers with disabilities in ordinary jobs.

Capacity and reliability analyses with applications to power quality

Science.gov (United States)

Azam, Mohammad; Tu, Fang; Shlapak, Yuri; Kirubarajan, Thiagalingam; Pattipati, Krishna R.; Karanam, Rajaiah

2001-07-01

The deregulation of energy markets, the ongoing advances in communication networks, the proliferation of intelligent metering and protective power devices, and the standardization of software/hardware interfaces are creating a dramatic shift in the way facilities acquire and utilize information about their power usage. The currently available power management systems gather a vast amount of information in the form of power usage, voltages, currents, and their time-dependent waveforms from a variety of devices (for example, circuit breakers, transformers, energy and power quality meters, protective relays, programmable logic controllers, motor control centers). What is lacking is an information processing and decision support infrastructure to harness this voluminous information into usable operational and management knowledge to handle the health of their equipment and power quality, minimize downtime and outages, and to optimize operations to improve productivity. This paper considers the problem of evaluating the capacity and reliability analyses of power systems with very high availability requirements (e.g., systems providing energy to data centers and communication networks with desired availability of up to 0.9999999). The real-time capacity and margin analysis helps operators to plan for additional loads and to schedule repair/replacement activities. The reliability analysis, based on computationally efficient sum of disjoint products, enables analysts to decide the optimum levels of redundancy, aids operators in prioritizing the maintenance options for a given budget and monitoring the system for capacity margin. The resulting analytical and software tool is demonstrated on a sample data center.

Tolerance analyses of a quadrupole magnet for advanced photon source upgrade

Energy Technology Data Exchange (ETDEWEB)

Liu, J., E-mail: Jieliu@aps.anl.gov; Jaski, M., E-mail: jaski@aps.anl.gov; Borland, M., E-mail: borland@aps.anl.gov [Advanced Photon Source, Argonne National Laboratory, 9700 S. Cass Avenue, Lemont, IL60439 (United States); Jain, A., E-mail: jain@bnl.gov [Superconducting Magnet Division, Brookhaven National Laboratory, P.O. Box 5000. Upton, NY 11973-5000 (United States)

2016-07-27

Given physics requirements, the mechanical fabrication and assembly tolerances for storage ring magnets can be calculated using analytical methods [1, 2]. However, this method is not easy for complicated magnet designs [1]. In this paper, a novel method is proposed to determine fabrication and assembly tolerances consistent with physics requirements, through a combination of magnetic and mechanical tolerance analyses. In this study, finite element analysis using OPERA is conducted to estimate the effect of fabrication and assembly errors on the magnetic field of a quadrupole magnet and to determine the allowable tolerances to achieve the specified magnetic performances. Based on the study, allowable fabrication and assembly tolerances for the quadrupole assembly are specified for the mechanical design of the quadrupole magnet. Next, to achieve the required assembly level tolerances, mechanical tolerance stackup analyses using a 3D tolerance analysis package are carried out to determine the part and subassembly level fabrication tolerances. This method can be used to determine the tolerances for design of other individual magnets and of magnet strings.

Tolerance analyses of a quadrupole magnet for advanced photon source upgrade

International Nuclear Information System (INIS)

Liu, J.; Jaski, M.; Borland, M.; Jain, A.

2016-01-01

Given physics requirements, the mechanical fabrication and assembly tolerances for storage ring magnets can be calculated using analytical methods [1, 2]. However, this method is not easy for complicated magnet designs [1]. In this paper, a novel method is proposed to determine fabrication and assembly tolerances consistent with physics requirements, through a combination of magnetic and mechanical tolerance analyses. In this study, finite element analysis using OPERA is conducted to estimate the effect of fabrication and assembly errors on the magnetic field of a quadrupole magnet and to determine the allowable tolerances to achieve the specified magnetic performances. Based on the study, allowable fabrication and assembly tolerances for the quadrupole assembly are specified for the mechanical design of the quadrupole magnet. Next, to achieve the required assembly level tolerances, mechanical tolerance stackup analyses using a 3D tolerance analysis package are carried out to determine the part and subassembly level fabrication tolerances. This method can be used to determine the tolerances for design of other individual magnets and of magnet strings.

Microcomputer-controlled thermoluminescent analyser IJS MR-200; Mikroracunalniski termoluminescentni analizator IJS MR-200

Energy Technology Data Exchange (ETDEWEB)

Mihelic, M; Miklavzic, U; Rupnik, Z; Satalic, P; Spreizer, F; Zerovnik, I [Institut Jozef Stefan, Ljubljana (Yugoslavia)

1985-07-01

Performances and concept of the multipurpose, microcomputer-controlled thermoluminescent analyser, designed for use in laboratory work TL dosemeters as well as for routine dose readings in the range from ecological to accident doses is described. The main features of the analyser are: time-linear sampling, digitalisation, storing, and subsequent displaying on the monitor time scale of the glow and and temperature curve of the TL material; digital stabilization, control and diagnostic of the analog unit; ability of storing 7 different 8-parametric heating programs; ability of storing 15 evaluation programs defined by 2 or 4 parameters and 3 different algorithms (altogether 5 types of evaluations). Analyser has several features intended for routine work: 9 function keys and possibilities of file forming on cassette or display disc, of dose calculation and averaging, of printing reports with names, and possibility of additional programming in Basic. (author)

Graves' disease: an analysis of thyroid hormone levels and hyperthyroid signs and symptoms.

Science.gov (United States)

Trzepacz, P T; Klein, I; Roberts, M; Greenhouse, J; Levey, G S

1989-11-01

Assessment of disease severity for patients with hyperthyroidism involves clinical evaluation and laboratory testing. To determine if there is a correlation between symptoms and thyroid function test results, we prospectively studied hyperthyroid patients using a standardized symptom rating scale and serum thyroid function parameters. We examined 25 patients with untreated, newly diagnosed Graves' disease using the Hyperthyroid Symptom Scale (HSS) and serum levels of thyroxine (T4), triiodothyronine (T3) relative insulin area (RIA), and estimates of free thyroxine index (FTI). In addition, we compared thyroid hormone levels with standard measures of depression and anxiety in these patients. When regression analyses controlling for age were performed, none of these symptom ratings were associated with FTI or T3 RIA. The HSS was correlated with goiter size and anxiety ratings and was inversely correlated with age. The present study suggests that there is no relationship between the clinical assessment of disease severity and serum levels of thyroid hormone in untreated Graves' disease.

Level and characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans in feed and feed additives.

Science.gov (United States)

Wang, Lingyun; Ding, Gangdou; Zhou, Zhiguang; Liu, Xun; Wang, Yixiao; Xie, HeidQunhui; Xu, Tuan; Wang, Pu; Zhao, Bin

2017-01-01

Feed security is a prerequisite for safe animal food products. In this study, 13 groups of feed and feed ingredients, totaling 2067 samples, were collected in the period of 2011 to 2014 from China. The highest mean level of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) was found in fish meals and shell powders, with a concentration of 60.35ng/kg, followed by mineral origin materials. In terms of the toxicity equivalent concentration, the fish oil group showed the highest PCDD/F levels because of their bio-accumulation through the aquatic food chain, with an average concentration of 1.26ng WHO-TEQ/kg, while the lowest level was observed in compound feed for chickens and pigs, with an average value of 0.16ng WHO-TEQ/kg. OCDD and OCDF were the predominant congeners in all groups except fish oils, in which the primary congeners were 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF. For zinc chloride samples, different from other zinc-based compound samples, the main congeners were 1,2,3,4,6,7,8-HpCDF (17%), 1,2,3,4,7,8,9-HpCDF (15%), 1,2,3,4,7,8-HxCDF (12%) and OCDF (30%). Considering toxicity equivalency factors, the dominant congeners were 2,3,4,7,8-PeCDF, 1, 2,3,4,7,8-HxCDF, 2,3,7,8-TCDF and 1,2,3,7,8-PeCDD, and the contribution to the total TEQ was 29%, 16%, 14% and 12%, respectively. Overall, 2.1% (43 out of 2067) of all the analyzed samples exceeded the different individual 'European Union maximum limited levels for PCDD/Fs. This study is beneficial for the determination of the status of contamination levels of feed and feed ingredients. Copyright © 2016. Published by Elsevier B.V.

Investigation of students’ intermediate conceptual understanding levels: the case of direct current electricity concepts

International Nuclear Information System (INIS)

Aktan, D Cobanoglu

2013-01-01

Conceptual understanding is one of the main topics in science and physics education research. In the majority of conceptual understanding studies, students’ understanding levels were categorized dichotomously, either as alternative or scientific understanding. Although they are invaluable in many ways, namely developing new instructional materials and assessment instruments, students’ alternative understandings alone are not sufficient to describe students’ conceptual understanding in detail. This paper introduces an example of a study in which a method was developed to assess and describe students’ conceptual understanding beyond alternative and scientific understanding levels. In this study, six undergraduate students’ conceptual understanding levels of direct current electricity concepts were assessed and described in detail by using their answers to qualitative problems. In order to do this, conceptual understanding indicators are described based on science and mathematics education literature. The students’ understanding levels were analysed by assertion analysis based on the conceptual understanding indicators. The results indicated that the participants demonstrated three intermediate understanding levels in addition to alternative and scientific understanding. This paper presents the method and its application to direct current electricity concepts. (paper)

Molecular responses of genetically modified maize to abiotic stresses as determined through proteomic and metabolomic analyses.

Directory of Open Access Journals (Sweden)

Rafael Fonseca Benevenuto

Full Text Available Some genetically modified (GM plants have transgenes that confer tolerance to abiotic stressors. Meanwhile, other transgenes may interact with abiotic stressors, causing pleiotropic effects that will affect the plant physiology. Thus, physiological alteration might have an impact on the product safety. However, routine risk assessment (RA analyses do not evaluate the response of GM plants exposed to different environmental conditions. Therefore, we here present a proteome profile of herbicide-tolerant maize, including the levels of phytohormones and related compounds, compared to its near-isogenic non-GM variety under drought and herbicide stresses. Twenty differentially abundant proteins were detected between GM and non-GM hybrids under different water deficiency conditions and herbicide sprays. Pathway enrichment analysis showed that most of these proteins are assigned to energetic/carbohydrate metabolic processes. Among phytohormones and related compounds, different levels of ABA, CA, JA, MeJA and SA were detected in the maize varieties and stress conditions analysed. In pathway and proteome analyses, environment was found to be the major source of variation followed by the genetic transformation factor. Nonetheless, differences were detected in the levels of JA, MeJA and CA and in the abundance of 11 proteins when comparing the GM plant and its non-GM near-isogenic variety under the same environmental conditions. Thus, these findings do support molecular studies in GM plants Risk Assessment analyses.

Environmental radiation level, radiation anxiety, and psychological distress of non-evacuee residents in Fukushima five years after the Great East Japan Earthquake: Multilevel analyses

Directory of Open Access Journals (Sweden)

Maiko Fukasawa

2017-12-01

Full Text Available The present study aimed to clarify the associations among radiation exposure or psychological exposure to the Fukushima nuclear power plant accident (i.e., fear/anxiety immediately after the accident, current radiation anxiety, and psychological distress among non-evacuee community residents in Fukushima five years after the Great East Japan Earthquake, which occurred in March 2011. A questionnaire survey was administered to a random sample of non-evacuee community residents from 49 municipalities of Fukushima prefecture from February to April 2016, and data from 1684 respondents (34.4% were analyzed. Environmental radiation levels at the time of the accident were ascertained from survey meter data, while environmental radiation levels at the time of the survey were ascertained from monitoring post data. In the questionnaire, immediate fear/anxiety after the accident, current radiation anxiety, and psychological distress were measured using a single-item question, a 7-item scale, and K6, respectively. Multilevel linear or logistic regression models were applied to analyze the determinants of radiation anxiety and psychological distress. The findings showed that environmental radiation levels at the time of the survey were more strongly associated with radiation anxiety than radiation levels immediately after the accident. Disaster-related experiences, such as direct damage, disaster-related family stress, and fear/anxiety after the accident, and demographic characteristics (e.g., younger age, being married, low socioeconomic status were significantly associated with radiation anxiety. Environmental radiation levels at the time of the accident or survey were not significantly associated with psychological distress. Radiation anxiety largely mediated the association between fear/anxiety after the accident and psychological distress. In addition to environmental radiation levels, respondents’ radiation anxiety was affected by multiple factors

Media Use, Political Participation and the Level of Digitization. A Comparative Analysis of EU Countries

Directory of Open Access Journals (Sweden)

Sergio Splendore

2016-04-01

Full Text Available The paper analyses six rounds of the European Social Surveys (from 2000 to 2012 to explore how 1 media uses, 2 unconventional and 3 conventional (i.e. voting forms of political participation have changed in sixteen European countries. Additionally, the research considers one of the latest surveys to investigate the relation between media use and participation in the contemporary period characterized by open data and e-government. The level of digitization in each country is assessed according to its infrastructure, the legal framework (namely the Freedom of Information Act, the quality of the data available from the public administration, and e-government development in terms of online services. The research question is whether use of the Internet and the level of national digitization affect unconventional forms of political participation. The results demonstrate that both the country’s level of digitization at the macro level and the use of the Web at the individual level are co-determinants of the forms of political participation considered. However, the level of digitization does not affect voting.

The short-term effects of air pollutants on respiratory disease mortality in Wuhan, China: comparison of time-series and case-crossover analyses.

Science.gov (United States)

Ren, Meng; Li, Na; Wang, Zhan; Liu, Yisi; Chen, Xi; Chu, Yuanyuan; Li, Xiangyu; Zhu, Zhongmin; Tian, Liqiao; Xiang, Hao

2017-01-13

Few studies have compared different methods when exploring the short-term effects of air pollutants on respiratory disease mortality in Wuhan, China. This study assesses the association between air pollutants and respiratory disease mortality with both time-series and time-stratified-case-crossover designs. The generalized additive model (GAM) and the conditional logistic regression model were used to assess the short-term effects of air pollutants on respiratory disease mortality. Stratified analyses were performed by age, sex, and diseases. A 10 μg/m 3 increment in SO 2 level was associated with an increase in relative risk for all respiratory disease mortality of 2.4% and 1.9% in the case-crossover and time-series analyses in single pollutant models, respectively. Strong evidence of an association between NO 2 and daily respiratory disease mortality among men or people older than 65 years was found in the case-crossover study. There was a positive association between air pollutants and respiratory disease mortality in Wuhan, China. Both time-series and case-crossover analyses consistently reveal the association between three air pollutants and respiratory disease mortality. The estimates of association between air pollution and respiratory disease mortality from the case-crossover analysis displayed greater variation than that from the time-series analysis.

Additive Manufacturing (3D Printing) Aircraft Parts and Tooling at the Maintenance Group Level

Science.gov (United States)

The purpose of this research was to evaluate the effectiveness of additive manufacturing (AM) or 3D printing for the Air Force aircraft maintenance...case study of the 552d MXGs 3D printing operation explores their use of a Fused Deposition Modeling (FDM) thermoplastic material to manufacture parts...by applying the case study’s analysis toward a proof of concept, producing a C-130J Aft Cargo Door Rub Strip for 3D printing . The study concluded by

Multivariate analyses of crater parameters and the classification of craters

Science.gov (United States)

Siegal, B. S.; Griffiths, J. C.

1974-01-01

Multivariate analyses were performed on certain linear dimensions of six genetic types of craters. A total of 320 craters, consisting of laboratory fluidization craters, craters formed by chemical and nuclear explosives, terrestrial maars and other volcanic craters, and terrestrial meteorite impact craters, authenticated and probable, were analyzed in the first data set in terms of their mean rim crest diameter, mean interior relief, rim height, and mean exterior rim width. The second data set contained an additional 91 terrestrial craters of which 19 were of experimental percussive impact and 28 of volcanic collapse origin, and which was analyzed in terms of mean rim crest diameter, mean interior relief, and rim height. Principal component analyses were performed on the six genetic types of craters. Ninety per cent of the variation in the variables can be accounted for by two components. Ninety-nine per cent of the variation in the craters formed by chemical and nuclear explosives is explained by the first component alone.

Pasta quality as impacted by the type of flour and starch and the level of egg addition.

Science.gov (United States)

Saleh, Mohammed; Al-Ismail, Khalid; Ajo, Radwan

2017-10-01

This study investigated the effects of substituting wheat flour with fractions of different starch types and egg levels on pasta quality. First order mixture response surface model was used where the effects of various starch types and egg levels on pasta quality were evaluated. Coefficients of estimation were determined and fractional contribution of wheat, starch type and egg levels were evaluated. Egg levels negatively (p egg level from 33 to 0%. Flow behavior index of treatments solution with various fractions of starch types and egg level ranged from 0.34 to 1.42 and was significantly (p cooked pasta quality including firmness, stickiness, cooking loss, and water uptake, keeping with consumer acceptability through varying starch type and egg level. Results show that flour and starch type and egg level interaction play significant role in pasta blends formulation. Moreover, substitution of wheat flour with acorn, native or modified corn and potato starches fractions, as well as with lupine, rice, tapioca, and stabilized rice bran flours would have significant effects on the physical properties and acceptability of various cereal products. For instance, the use of rice bran in potentially developed products would enhance the consumption of whole grain foods, resulting in improved intake of fiber and other healthy components. © 2016 Wiley Periodicals, Inc.

Citrus pulp pellets as an additive for orange bagasse silage

Directory of Open Access Journals (Sweden)

R. K. Grizotto

2017-03-01

Full Text Available This study evaluated the fermentation profile of orange bagasse ensiled with three levels of dry matter (DM using citrus pulp pellets as a moisture-absorbing additive. Thirty experimental silos (3 treatments, 5 storage times, 2 replicates were prepared using 25-liter plastic buckets containing orange bagasse and three levels of pelleted citrus pulp (0, 6% and 20% as additive. A completely randomized design with repeated measures over time was used. The periods of anaerobic storage were 3, 7, 14, 28 and 56 days. Natural orange bagasse contained 13.9% DM, which increased to 19.1% and 25.5% with the inclusion of 6% and 20% citrus pulp pellets, respectively. The apparent density was inversely correlated with DM content and a higher level of compaction (982 kg/m3 was observed in the mass ensiled with the lowest DM level (13.9%. Additionally, lower compaction (910 kg/m3 was found in the mass ensiled with the additive. The chemical composition of the mass ensiled with or without citrus pulp pellets did not differ significantly in terms of protein, ether extract, neutral detergent fiber, lignin or in vitro DM digestibility (P≥0.05, as expected. Thus, it was possible to analyze only the effect of the inclusion of citrus pulp pellets on the increase in DM content. The inclusion of 20% of the additive reduced (P<0.01 losses due to effluent (98% less and gas production (81% less compared to the control treatment at the end of the anaerobic storage period. In this treatment, a higher (P≤0.05 log number of lactic acid bacteria (4.61 log CFU/g was also observed compared to the other treatments, indicating that the increase in DM favored the growth of these bacteria. In addition, the low yeast count (about 1 log CFU/g sample and the pH below 4.0, which were probably due to the production of lactic and acetic acids, show that the orange bagasse is rich in fermentable soluble carbohydrates and is indicated for ensiling. In conclusion, orange bagasse can be

The extraction of lifetimes of weakly-populated nuclear levels in recoil distance method experiments

International Nuclear Information System (INIS)

Kennedy, D.L.; Stuchbery, A.E.; Bolotin, H.H.

1979-01-01

Two analytic techniques are described which extend the conventional analysis of recoil-distance method (RDM) data. The first technique utilizes the enhanced counting statistics of the composite spectrum formed by the addition of all γ-ray spectra recorded at the different target-to-stopper distances employed, in order to extract the lifetimes of levels whose observed depopulating γ-ray transitions have insufficient statistics to permit conventional analysis. The second technique analyses peak centroids rather than peak areas to account for contamination by flight distance dependent background. The results from a recent study of the low-lying excited states in 196 198 Pt for those levels whose lifetimes could be extracted by conventional RDM analysis are shown to be in good agreement with those obtained using the new methods of analysis

Self-Cleaning Photocatalytic Polyurethane Coatings Containing Modified C60 Fullerene Additives

Directory of Open Access Journals (Sweden)

Jeffrey G. Lundin

2014-08-01

Full Text Available Surfaces are often coated with paint for improved aesthetics and protection; however, additional functionalities that impart continuous self-decontaminating and self-cleaning properties would be extremely advantageous. In this report, photochemical additives based on C60 fullerene were incorporated into polyurethane coatings to investigate their coating compatibility and ability to impart chemical decontaminating capability to the coating surface. C60 exhibits unique photophysical properties, including the capability to generate singlet oxygen upon exposure to visible light; however, C60 fullerene exhibits poor solubility in solvents commonly employed in coating applications. A modified C60 containing a hydrophilic moiety was synthesized to improve polyurethane compatibility and facilitate segregation to the polymer–air interface. Bulk properties of the polyurethane films were analyzed to investigate additive–coating compatibility. Coatings containing photoactive additives were subjected to self-decontamination challenges against representative chemical contaminants and the effects of additive loading concentration, light exposure, and time on chemical decontamination are reported. Covalent attachment of an ethylene glycol tail to C60 improved its solubility and dispersion in a hydrophobic polyurethane matrix. Decomposition products resulting from oxidation were observed in addition to a direct correlation between additive loading concentration and decomposition of surface-residing contaminants. The degradation pathways deduced from contaminant challenge byproduct analyses are detailed.

The complete plastome of macaw palm [Acrocomia aculeata (Jacq.) Lodd. ex Mart.] and extensive molecular analyses of the evolution of plastid genes in Arecaceae.

Science.gov (United States)

de Santana Lopes, Amanda; Gomes Pacheco, Túlio; Nimz, Tabea; do Nascimento Vieira, Leila; Guerra, Miguel P; Nodari, Rubens O; de Souza, Emanuel Maltempi; de Oliveira Pedrosa, Fábio; Rogalski, Marcelo

2018-04-01

The plastome of macaw palm was sequenced allowing analyses of evolution and molecular markers. Additionally, we demonstrated that more than half of plastid protein-coding genes in Arecaceae underwent positive selection. Macaw palm is a native species from tropical and subtropical Americas. It shows high production of oil per hectare reaching up to 70% of oil content in fruits and an interesting plasticity to grow in different ecosystems. Its domestication and breeding are still in the beginning, which makes the development of molecular markers essential to assess natural populations and germplasm collections. Therefore, we sequenced and characterized in detail the plastome of macaw palm. A total of 221 SSR loci were identified in the plastome of macaw palm. Additionally, eight polymorphism hotspots were characterized at level of subfamily and tribe. Moreover, several events of gain and loss of RNA editing sites were found within the subfamily Arecoideae. Aiming to uncover evolutionary events in Arecaceae, we also analyzed extensively the evolution of plastid genes. The analyses show that highly divergent genes seem to evolve in a species-specific manner, suggesting that gene degeneration events may be occurring within Arecaceae at the level of genus or species. Unexpectedly, we found that more than half of plastid protein-coding genes are under positive selection, including genes for photosynthesis, gene expression machinery and other essential plastid functions. Furthermore, we performed a phylogenomic analysis using whole plastomes of 40 taxa, representing all subfamilies of Arecaceae, which placed the macaw palm within the tribe Cocoseae. Finally, the data showed here are important for genetic studies in macaw palm and provide new insights into the evolution of plastid genes and environmental adaptation in Arecaceae.

Regulatory analyses for severe accident issues: an example

International Nuclear Information System (INIS)

Burke, R.P.; Strip, D.R.; Aldrich, D.C.

1984-09-01

This report presents the results of an effort to develop a regulatory analysis methodology and presentation format to provide information for regulatory decision-making related to severe accident issues. Insights and conclusions gained from an example analysis are presented. The example analysis draws upon information generated in several previous and current NRC research programs (the Severe Accident Risk Reduction Program (SARRP), Accident Sequence Evaluation Program (ASEP), Value-Impact Handbook, Economic Risk Analyses, and studies of Vented Containment Systems and Alternative Decay Heat Removal Systems) to perform preliminary value-impact analyses on the installation of either a vented containment system or an alternative decay heat removal system at the Peach Bottom No. 2 plant. The results presented in this report are first-cut estimates, and are presented only for illustrative purposes in the context of this document. This study should serve to focus discussion on issues relating to the type of information, the appropriate level of detail, and the presentation format which would make a regulatory analysis most useful in the decisionmaking process

Unconscious analyses of visual scenes based on feature conjunctions.

Science.gov (United States)

Tachibana, Ryosuke; Noguchi, Yasuki

2015-06-01

To efficiently process a cluttered scene, the visual system analyzes statistical properties or regularities of visual elements embedded in the scene. It is controversial, however, whether those scene analyses could also work for stimuli unconsciously perceived. Here we show that our brain performs the unconscious scene analyses not only using a single featural cue (e.g., orientation) but also based on conjunctions of multiple visual features (e.g., combinations of color and orientation information). Subjects foveally viewed a stimulus array (duration: 50 ms) where 4 types of bars (red-horizontal, red-vertical, green-horizontal, and green-vertical) were intermixed. Although a conscious perception of those bars was inhibited by a subsequent mask stimulus, the brain correctly analyzed the information about color, orientation, and color-orientation conjunctions of those invisible bars. The information of those features was then used for the unconscious configuration analysis (statistical processing) of the central bars, which induced a perceptual bias and illusory feature binding in visible stimuli at peripheral locations. While statistical analyses and feature binding are normally 2 key functions of the visual system to construct coherent percepts of visual scenes, our results show that a high-level analysis combining those 2 functions is correctly performed by unconscious computations in the brain. (c) 2015 APA, all rights reserved).

Modern Trends of Additional Professional Education Development for Mineral Resource Extracting

Science.gov (United States)

Borisova, Olga; Frolova, Victoria; Merzlikina, Elena

2017-11-01

The article contains the results of development of additional professional education research, including the field of mineral resource extracting in Russia. The paper describes the levels of education received in Russian Federation and determines the place and role of additional professional education among them. Key factors influencing the development of additional professional education are identified. As a result of the research, the authors proved the necessity of introducing additional professional education programs on educational Internet platforms for mineral resource extracting.

Influence of the gypsum dehydration temperature and alkali additives on the properties of anhydrite cement

Directory of Open Access Journals (Sweden)

Leskeviciene V.

2010-01-01

Full Text Available While dehydrating gypsum with additives at the temperatures of 800°C and 900°C the influence of alkali additives on both the crystalline structure of anhydrite and properties of anhydrite binder was investigated. The industrial and household wastes including other lowcost materials were used as additives. Having heated them with gypsum the anhydrite with alkali activation properties was obtained. The properties of such substances were evaluated using the methods of chemical, diffractive X-ray scanning and scanning electron microscopy (SEM analyses. Some additives, e.g. 5 % ground glass waste, were found to increase crystal agglomerate formation of anhydrite binder, accelerate the hydration process of anhydrite and double the compressive strength of hydrated samples compared to samples without additives.

Diagnostic Comparison of Meteorological Analyses during the 2002 Antarctic Winter

Science.gov (United States)

Manney, Gloria L.; Allen, Douglas R.; Kruger, Kirstin; Naujokat, Barbara; Santee, Michelle L.; Sabutis, Joseph L.; Pawson, Steven; Swinbank, Richard; Randall, Cora E.; Simmons, Adrian J.;

Analyses of demand response in Denmark

International Nuclear Information System (INIS)

Moeller Andersen, F.; Grenaa Jensen, S.; Larsen, Helge V.; Meibom, P.; Ravn, H.; Skytte, K.; Togeby, M.

2006-10-01

Due to characteristics of the power system, costs of producing electricity vary considerably over short time intervals. Yet, many consumers do not experience corresponding variations in the price they pay for consuming electricity. The topic of this report is: are consumers willing and able to respond to short-term variations in electricity prices, and if so, what is the social benefit of consumers doing so? Taking Denmark and the Nord Pool market as a case, the report focuses on what is known as short-term consumer flexibility or demand response in the electricity market. With focus on market efficiency, efficient allocation of resources and security of supply, the report describes demand response from a micro-economic perspective and provides empirical observations and case studies. The report aims at evaluating benefits from demand response. However, only elements contributing to an overall value are presented. In addition, the analyses are limited to benefits for society, and costs of obtaining demand response are not considered. (au)

Mixed Approach Retrospective Analyses of Suicide and Suicidal Ideation for Brand Compared with Generic Central Nervous System Drugs.

Science.gov (United States)

Cheng, Ning; Rahman, Md Motiur; Alatawi, Yasser; Qian, Jingjing; Peissig, Peggy L; Berg, Richard L; Page, C David; Hansen, Richard A

2018-04-01

Several different types of drugs acting on the central nervous system (CNS) have previously been associated with an increased risk of suicide and suicidal ideation (broadly referred to as suicide). However, a differential association between brand and generic CNS drugs and suicide has not been reported. This study compares suicide adverse event rates for brand versus generic CNS drugs using multiple sources of data. Selected examples of CNS drugs (sertraline, gabapentin, zolpidem, and methylphenidate) were evaluated via the US FDA Adverse Event Reporting System (FAERS) for a hypothesis-generating study, and then via administrative claims and electronic health record (EHR) data for a more rigorous retrospective cohort study. Disproportionality analyses with reporting odds ratios and 95% confidence intervals (CIs) were used in the FAERS analyses to quantify the association between each drug and reported suicide. For the cohort studies, Cox proportional hazards models were used, controlling for demographic and clinical characteristics as well as the background risk of suicide in the insured population. The FAERS analyses found significantly lower suicide reporting rates for brands compared with generics for all four studied products (Breslow-Day P brand CNS drugs in FAERS and adjusted retrospective cohort analyses remained significant only for sertraline. However, even for sertraline, temporal confounding related to the close proximity of black box warnings and generic availability is possible. Additional analyses in larger data sources with additional drugs are needed.

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 4: Uncertainty and sensitivity analyses for 40 CFR 191, Subpart B

Energy Technology Data Exchange (ETDEWEB)

1993-08-01

Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume of the 1992 PA contains results of uncertainty and sensitivity analyses with respect to the EPA`s Environmental Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Additional information about the 1992 PA is provided in other volumes. Results of the 1992 uncertainty and sensitivity analyses indicate that, conditional on the modeling assumptions, the choice of parameters selected for sampling, and the assigned parameter-value distributions, the most important parameters for which uncertainty has the potential to affect compliance with 40 CFR 191B are: drilling intensity, intrusion borehole permeability, halite and anhydrite permeabilities, radionuclide solubilities and distribution coefficients, fracture spacing in the Culebra Dolomite Member of the Rustler Formation, porosity of the Culebra, and spatial variability of Culebra transmissivity. Performance with respect to 40 CFR 191B is insensitive to uncertainty in other parameters; however, additional data are needed to confirm that reality lies within the assigned distributions.

Effects of different level addition of zeolite ZSM-5 additive on quality and composition of the dry gas, LPG (Liquefied Petroleum Gas) and gasoline, produced in FCC (Fluid Catalytic Cracking); Efeito dos diferentes niveis de adicao de aditivos de ZSM-5 na qualidade e composicao do gas combustivel, GLP e gasolina produzidos em FCC

Energy Technology Data Exchange (ETDEWEB)

Bastiani, Raquel; Pimenta, Ricardo D.M.; Almeida, Marlon B.B.; Lau, Lam Y. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2004-07-01

The effects of the addition of different level of ZSM-5 additives on different FCC catalysts formulations have been studied on laboratory scale FST (Fluidized Simulation Test). The main objective of the present work is to perform a qualitative identification of the main parameters of FCC catalyst which affect the ZSM-5 additives performance concerning quality and composition of Dry Gas, LPG and Gasoline. The product composition of each test was analyzed by PIANO groups separated by carbon number. The effect of ZSM-5 on products composition was evaluated. The results showed that the ZSM-5 additive cracks gasoline range olefins and isoparaffins into Dry Gas and LPG, favoring the formation of ethylene, propylene and butylenes, while the absolute yield of gasoline aromatics changes little. The aromatics fraction in gasoline, MON and RON numbers in gasoline increase. The ZSM-5 effectiveness is negatively affected by high levels of rare earth on FCC catalyst (RE-USY). Higher hydrogen transfer provides lower olefins (higher than C6) formation, which are the most reactive species for ZSM-5 cracking. (author)

The semi-empirical low-level background statistics

International Nuclear Information System (INIS)

Tran Manh Toan; Nguyen Trieu Tu

1992-01-01

A semi-empirical low-level background statistics was proposed. The one can be applied to evaluated the sensitivity of low background systems, and to analyse the statistical error, the 'Rejection' and 'Accordance' criteria for processing of low-level experimental data. (author). 5 refs, 1 figs

Levels of glyphosate in surface waters, sediments and soils associated with direct sowing soybean cultivation in north pampasic region of Argentina

Energy Technology Data Exchange (ETDEWEB)

Peruzzo, Pablo J. [Grupo Materiales Polimericos, INIFTA - Instituto de Investigaciones Fisicoquimicas Teoricas y Aplicadas (UNLP-CONICET), Diag. 113 y 64, CC 16 Suc 4, 1900 La Plata (Argentina); Porta, Atilio A. [CIMA - Centro de Investigaciones del Medio Ambiente, Facultad de Ciencias Exactas, Universidad Nacional de La Plata, 47 y 115, 1900 La Plata (Argentina); Division Quimica Analitica, Departamento de Quimica, Facultad de Ciencias Exactas, Universidad Nacional de La Plata, 47 y 115, 1900 La Plata (Argentina)], E-mail: aporta@quimica.unlp.edu.ar; Ronco, Alicia E. [CIMA - Centro de Investigaciones del Medio Ambiente, Facultad de Ciencias Exactas, Universidad Nacional de La Plata, 47 y 115, 1900 La Plata (Argentina)

2008-11-15

Levels of glyphosate were determined in water, soil and sediment samples from a transgenic soybean cultivation area located near to tributaries streams of the Pergamino-Arrecifes system in the north of the Province of Buenos Aires, Argentina. Field work took into account both the pesticide application and the rains occurring after applications. The pesticide was analysed by HPLC-UV detection, previous derivatization with 9-fluorenylmethylchloroformate (FMOC-Cl). In addition, SoilFug multimedia model was used to analyse the environmental distribution of the pesticides. In the field, levels of glyphosate in waters ranged from 0.10 to 0.70 mg/L, while in sediments and soils values were between 0.5 and 5.0 mg/Kg. Temporal variation of glyphosate levels depended directly on the time of application and the rain events. The results obtained from the application of the model are in accordance with the values found in the field. - Glyphosate concentrations in the environment from a region where little information exists about this and intensive cultivation activities predominate in large areas.

Levels of glyphosate in surface waters, sediments and soils associated with direct sowing soybean cultivation in north pampasic region of Argentina

International Nuclear Information System (INIS)

Peruzzo, Pablo J.; Porta, Atilio A.; Ronco, Alicia E.

2008-01-01

Levels of glyphosate were determined in water, soil and sediment samples from a transgenic soybean cultivation area located near to tributaries streams of the Pergamino-Arrecifes system in the north of the Province of Buenos Aires, Argentina. Field work took into account both the pesticide application and the rains occurring after applications. The pesticide was analysed by HPLC-UV detection, previous derivatization with 9-fluorenylmethylchloroformate (FMOC-Cl). In addition, SoilFug multimedia model was used to analyse the environmental distribution of the pesticides. In the field, levels of glyphosate in waters ranged from 0.10 to 0.70 mg/L, while in sediments and soils values were between 0.5 and 5.0 mg/Kg. Temporal variation of glyphosate levels depended directly on the time of application and the rain events. The results obtained from the application of the model are in accordance with the values found in the field. - Glyphosate concentrations in the environment from a region where little information exists about this and intensive cultivation activities predominate in large areas

Framing Trust at the Street-Level

DEFF Research Database (Denmark)

Perry, Kevin Anthony

and artefacts such as media and local authority reports. In addition to the empirical material, the study explores a key governmental policy to investigate how the (previous) government names and frames people with minority ethnic backgrounds. Analysing this policy helps to locate the fieldwork and interactants...

Integrated process analyses studies on mixed low level and transuranic wastes. Summary report

International Nuclear Information System (INIS)

1997-12-01

Options for integrated thermal and nonthermal treatment systems for mixed low-level waste (MLLW) are compared such as total life cycle cost (TLCC), cost sensitivities, risk, energy requirements, final waste volume, and aqueous and gaseous effluents. The comparisons were derived by requiring all conceptual systems to treat the same composition of waste with the same operating efficiency. Thus, results can be used as a general guideline for the selection of treatment and disposal concepts. However, specific applications of individual systems will require further analysis. The potential for cost saving options and the research and development opportunities are summarized

Integrated process analyses studies on mixed low level and transuranic wastes. Summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

Options for integrated thermal and nonthermal treatment systems for mixed low-level waste (MLLW) are compared such as total life cycle cost (TLCC), cost sensitivities, risk, energy requirements, final waste volume, and aqueous and gaseous effluents. The comparisons were derived by requiring all conceptual systems to treat the same composition of waste with the same operating efficiency. Thus, results can be used as a general guideline for the selection of treatment and disposal concepts. However, specific applications of individual systems will require further analysis. The potential for cost saving options and the research and development opportunities are summarized.

Addition of sucralose enhances the release of satiety hormones in combination with pea protein.

Science.gov (United States)

Geraedts, Maartje C P; Troost, Freddy J; Saris, Wim H M

2012-03-01

Exposing the intestine to proteins or tastants, particularly sweet, affects satiety hormone release. There are indications that each sweetener has different effects on this release, and that combining sweeteners with other nutrients might exert synergistic effects on hormone release. STC-1 cells were incubated with acesulfame-K, aspartame, saccharine, sucralose, sucrose, pea, and pea with each sweetener. After a 2-h incubation period, cholecystokinin(CCK) and glucagon-like peptide 1 (GLP-1) concentrations were measured. Using Ussing chamber technology, the mucosal side of human duodenal biopsies was exposed to sucrose, sucralose, pea, and pea with each sweetener. CCK and GLP-1 levels were measured in basolateral secretions. In STC-1 cells, exposure to aspartame, sucralose, sucrose, pea, and pea with sucralose increased CCK levels, whereas GLP-1 levels increased after addition of all test products. Addition of sucrose and sucralose to human duodenal biopsies did not affect CCK and GLP-1 release; addition of pea stimulated CCK and GLP-1 secretion. Combining pea with sucrose and sucralose induced even higher levels of CCK and GLP-1. Synchronous addition of pea and sucralose to enteroendocrine cells induced higher levels of CCK and GLP-1 than addition of each compound alone. This study shows that combinations of dietary compounds synergize to enhance satiety hormone release. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Seismic analyses of structures. 1st draft

International Nuclear Information System (INIS)

David, M.

1995-01-01

The dynamic analysis presented in this paper refers to the seismic analysis of the main building of Paks NPP. The aim of the analysis was to determine the floor response spectra as response to seismic input. This analysis was performed by the 3-dimensional calculation model and the floor response spectra were determined for a number levels from the floor response time histories and no other adjustments were applied. The following results of seismic analysis are presented: 3-dimensional finite element model; basic assumptions of dynamic analyses; table of frequencies and included factors; modal masses for all modes; floor response spectra in all the selected nodes with figures of indicated nodes and important nodes of free vibration

Seismic analyses of structures. 1st draft

Energy Technology Data Exchange (ETDEWEB)

David, M [David Consulting, Engineering and Design Office (Czech Republic)

1995-07-01

The dynamic analysis presented in this paper refers to the seismic analysis of the main building of Paks NPP. The aim of the analysis was to determine the floor response spectra as responseto seismic input. This analysis was performed by the 3-dimensional calculation model and the floor response spectra were determined for a number levels from the floor response time histories and no other adjustments were applied. The following results of seismic analysis are presented: 3-dimensional finite element model; basic assumptions of dynamic analyses; table of frequencies and included factors; modal masses for all modes; floor response spectra in all the selected nodes with figures of indicated nodes and important nodes of free vibration.

Search for new physics in $t\\bar{t}$ final states with additional heavy-flavor jets with the ATLAS detector

CERN Document Server

AUTHOR|(SzGeCERN)702756; Juste Rozas, Aurelio

2016-01-01

This dissertation presents searches in $t\\bar{t}$ final states with additional heavy-flavor jets using $20.3\\ {fb^{-1}}$ of $pp$ collision data at $\\sqrt{s} = 8\\ TeV$, recorded with the ATLAS experiment at the LHC. Exploiting this final state, three analyses are presented that address the instability of the Higgs boson mass from different perspectives. The main challenge for the presented analyses lies in the precise modeling of the background, in particular $t\\bar{t}+b\\bar{b}$. Since no measurements have been performed yet on the $t\\bar{t}$ production with additional heavy-flavor jets, the analyses have to rely on Monte Carlo (MC) simulation for the background. Recent developments in MC simulation have improved the description of the background, and a great effort is invested in porting the state-of-the-art predictions into the analyses. The systematic uncertainties on the modeling of the $t\\bar{t}+b\\bar{b}$ background constitute the main source of sensitivity degradation. In order to reduce the impact of ...

A Next Generation Digital Counting System For Low-Level Tritium Studies (Project Report)

International Nuclear Information System (INIS)

Bowman, P.

2016-01-01

Since the early seventies, SRNL has pioneered low-level tritium analysis using various nuclear counting technologies and techniques. Since 1999, SRNL has successfully performed routine low-level tritium analyses with counting systems based on digital signal processor (DSP) modules developed in the late 1990s. Each of these counting systems are complex, unique to SRNL, and fully dedicated to performing routine tritium analyses of low-level environmental samples. It is time to modernize these systems due to a variety of issues including (1) age, (2) lack of direct replacement electronics modules and (3) advances in digital signal processing and computer technology. There has been considerable development in many areas associated with the enterprise of performing low-level tritium analyses. The objective of this LDRD project was to design, build, and demonstrate a Next Generation Tritium Counting System (NGTCS), while not disrupting the routine low-level tritium analyses underway in the facility on the legacy counting systems. The work involved (1) developing a test bed for building and testing new counting system hardware that does not interfere with our routine analyses, (2) testing a new counting system based on a modern state of the art DSP module, and (3) evolving the low-level tritium counter design to reflect the state of the science.

Evaluation of PCDD/Fs characterization in animal feed and feed additives.

Science.gov (United States)

Kim, MeeKyung; Kim, Sooyeon; Yun, Seon Jong; Kwon, Jin-Wook; Son, Seong-Wan

2007-09-01

Safety control of feed and feed additives is necessary to have safe food of animal origin. Based on media reports, nine incidents regarding dioxins and/or PCBs contaminations occurred worldwide during the last decade. Korea is a country which imports feed and feed additives. In this study, various kinds of feed and feed additives were analyzed to monitor the contamination level of dioxins. The level of PCDD/Fs in fish oil was the highest with a concentration of 23.33ngkg(-1), which is equivalent to a toxicological concentration of 4.68ngWHO-TEQ/kg. Feed from animals origin such as chicken meal, animal fat, fish meal, fish oil, and shell powder showed relatively higher concentrations of PCDD/Fs. Feed from plants origin, minerals, and additives ranged from non-detects for bit pulp and ethoxyquin to 8.28ngkg(-1) for dl-methionine. From a toxicological point of view, the highest concentration in vitamins was 0.08ngWHO-TEQ/kg among the feed additives. 2,3,4,7,8-PeCDF was the dominant congener in samples of fish oil, fish meal, and shell powder. Animal fat showed that the pattern of PCDD/Fs depends on the sources of contamination. A sample of animal fat showed 1,2,3,4,7,8-HxCDF and the other sample showed 1,2,3,4,7,8-HxCDD as a primary congener. Generally, low levels of PCDDs were detected in feed additives. Patterns of PCDD/Fs in choline chloride were different with that in choline chloride from an incident in Europe in 2000.

Quantifying trade-offs between future yield levels, food availability and forest and woodland conservation in Benin.

Science.gov (United States)

Duku, Confidence; Zwart, Sander J; van Bussel, Lenny G J; Hein, Lars

2018-01-01

Meeting the dual objectives of food security and ecosystem protection is a major challenge in sub-Saharan Africa (SSA). To this end agricultural intensification is considered desirable, yet, there remain uncertainties regarding the impact of climate change on opportunities for agricultural intensification and the adequacy of intensification options given the rapid population growth. We quantify trade-offs between levels of yield gap closure, food availability and forest and woodland conservation under different scenarios. Each scenario is made up of a combination of variants of four parameters i.e. (1) climate change based on Representative Concentration Pathways (RCPs); (2) population growth based on Shared Socioeconomic Pathways (SSPs); (3) cropland expansion with varying degrees of deforestation; and (4) different degrees of yield gap closure. We carry out these analyses for three major food crops, i.e. maize, cassava and yam, in Benin. Our analyses show that in most of the scenarios, the required levels of yield gap closures required to maintain the current levels of food availability can be achieved by 2050 by maintaining the average rate of yield increases recorded over the past two and half decades in addition to the current cropping intensity. However, yields will have to increase at a faster rate than has been recorded over the past two and half decades in order to achieve the required levels of yield gap closures by 2100. Our analyses also show that without the stated levels of yield gap closure, the areas under maize, cassava and yam cultivation will have to increase by 95%, 102% and 250% respectively in order to maintain the current levels of per capita food availability. Our study shows that food security outcomes and forest and woodland conservation goals in Benin and likely the larger SSA region are inextricably linked together and require holistic management strategies that considers trade-offs and co-benefits. Copyright © 2017 Elsevier B.V. All

Graphical augmentations to the funnel plot assess the impact of additional evidence on a meta-analysis.

Science.gov (United States)

Langan, Dean; Higgins, Julian P T; Gregory, Walter; Sutton, Alexander J

2012-05-01

We aim to illustrate the potential impact of a new study on a meta-analysis, which gives an indication of the robustness of the meta-analysis. A number of augmentations are proposed to one of the most widely used of graphical displays, the funnel plot. Namely, 1) statistical significance contours, which define regions of the funnel plot in which a new study would have to be located to change the statistical significance of the meta-analysis; and 2) heterogeneity contours, which show how a new study would affect the extent of heterogeneity in a given meta-analysis. Several other features are also described, and the use of multiple features simultaneously is considered. The statistical significance contours suggest that one additional study, no matter how large, may have a very limited impact on the statistical significance of a meta-analysis. The heterogeneity contours illustrate that one outlying study can increase the level of heterogeneity dramatically. The additional features of the funnel plot have applications including 1) informing sample size calculations for the design of future studies eligible for inclusion in the meta-analysis; and 2) informing the updating prioritization of a portfolio of meta-analyses such as those prepared by the Cochrane Collaboration. Copyright © 2012 Elsevier Inc. All rights reserved.

Ionizing radiation effects of Cobalt-60 on the physical-chemical, sensorial and microbiological of bread with addition of linseed (Linum usitatissimum); Efeitos da radiacao ionizante de cobalto-60 nas caracteristicas fisico-quimicas sensoriais e microbiolgicas de paes com adicao de linhaca (Linum usitatissimum)

Energy Technology Data Exchange (ETDEWEB)

Moura, Neila Camargo de

2011-07-01

The incorporation of functional ingredients on breading products has grown very much lately, because of the preoccupation with the consumers' health. The linseed has awakened the interest by its high level of fiber, lignin, omega-3 and antioxidants compounds. The objective of the present work is evaluate the ionizing radiation effect of {sup 60}Co on the physical-chemical, sensorial and microbiological characteristics of bread with addition of different concentration of brown linseed. There were elaborated 3 types of bread: French roll, form bread prepared with the mixture and form bread produced with conventional ingredients. It was added smashed brown linseed on the bread dough, with concentrations of 8% and 12%. After the preparation, the three kinds of bread packed with polypropylene packages and taken to the IPEN/USP (Institute of Nuclear Energetic Research/University of São Paulo) and irradiated with doses of 6, 8 and 10 kGy. Treatments were elaborated without the addition of linseed and without irradiation, for control, totalizing 12 distinct treatments, to each bread formula tested. Chemical analyses were made (centesimal composition, anti-nutritional compounds, anti-oxidant activity, glycemic index, fat acids, complex B vitamins and minerals); physical analyses (cooking index, volume, color and water activity); sensorial analyses (preference tests and Descriptive Quantitative Analysis - ADQ); microbiological analysis and a survey about irradiated products. It could be seen that the addition of linseed was efficient to increase the level of alimentary fiber and the level of lipids on the 3 bread formula. The three kinds of bread that received the linseed addition and that were not irradiated presented increase on the level of total phenolic; however, when the samples which received the linseed addition were submitted to the irradiation process, it could be noticed the decrease of the antioxidant capacity. There was an increase on the level of omega-3

The teratology testing of food additives.

Science.gov (United States)

Barrow, Paul C; Spézia, François

2013-01-01

The developmental and reproductive toxicity testing (including teratogenicity) of new foods and food additives is performed worldwide according to the guidelines given in the FDA Redbook. These studies are not required for substances that are generally recognized as safe, according to the FDA inventory. The anticipated cumulated human exposure level above which developmental or reproduction studies are required depends on the structure-alert category. For food additives of concern, both developmental (prenatal) and reproduction (multigeneration) studies are required. The developmental studies are performed in two species, usually the rat and the rabbit. The reproduction study is generally performed in the rat. The two rat studies are preferably combined into a single experimental design, if possible. The test methods described in the FDA Redbook are similar to those specified by the OECD for the reproductive toxicity testing of chemicals.

An additive matrix preconditioning method with application for domain decomposition and two-level matrix partitionings

Czech Academy of Sciences Publication Activity Database

Axelsson, Owe

2010-01-01

Roč. 5910, - (2010), s. 76-83 ISSN 0302-9743. [International Conference on Large-Scale Scientific Computations, LSSC 2009 /7./. Sozopol, 04.06.2009-08.06.2009] R&D Projects: GA AV ČR 1ET400300415 Institutional research plan: CEZ:AV0Z30860518 Keywords : additive matrix * condition number * domain decomposition Subject RIV: BA - General Mathematics www.springerlink.com

Analysis and discussion on reports of additional safety assessment of nuclear installations with respect to the Fukushima accident

International Nuclear Information System (INIS)

Sene, Monique; Sene, Raymond

2011-11-01

This document proposes an analysis of the reports made by the different operators of nuclear installations within the frame of a safety audit of the French nuclear installations with respect to the Fukushima accident. Operators (mainly AREVA, the CEA and EDF) were asked to perform additional safety assessments. In a first part, the conclusions of EDF reports are analysed regarding the seismic risk, the flooding risk, the situation of some specific sites (Fessenheim, Tricastin), other phenomena (rains, winds), loss of electricity supplies and of cooling systems, severe accidents, hydrogen issue, chemical hazards, subcontractors, crisis management. Conclusions of AREVA reports are analysed for the different sites (Tricastin, La Hague, MELOX factory, Romans factory). Conclusions of CEA reports are analysed for the different concerned installations (ATPu, Masurca, Osiris, Phenix, Jules Horowitz reactor). A second part proposes a global analysis of EDF's additional safety assessment reports regarding earthquake, flooding, other extreme natural phenomena, loss of electricity supplies and cooling system, subcontracting conditions, crisis management, and radiation protection organisation. AREVA's and CEA's reports are then analysed in terms of report structure and content, and for the different concerned sites

Mate extract as feed additive for improvement of beef quality

DEFF Research Database (Denmark)

de Zawadzki, Andressa; Arrivetti, Leandro de O.R.; Vidal, Marília P.

2017-01-01

Mate (Ilex paraguariensis A.St.-Hil.) is generally recognized as safe (GRAS status) and has a high content of alkaloids, saponins, and phenolic acids. Addition of mate extract to broilers feed has been shown to increase the oxidative stability of chicken meat, however, its effect on beef quality...... from animals supplemented with mate extract has not been investigated so far. Addition of extract of mate to a standard maize/soy feed at a level of 0.5, 1.0 or 1.5% w/w to the diet of feedlot for cattle resulted in increased levels of inosine monophosphate, creatine and carnosine in the fresh meat....... The content of total conjugated linoleic acid increased in the meat as mate extract concentration was increased in the feed. The tendency to radical formation in meat slurries as quantified by EPR spin-trapping decreased as increasing mate extract addition to feed, especially after storage of the meat...

Self-esteem as a mediator between personality traits and body esteem: path analyses across gender and race/ethnicity.

Science.gov (United States)

Skorek, Małgorzata; Song, Anna V; Dunham, Yarrow

2014-01-01

Prior literature examines the direct relationship between personality traits and body esteem. This article explores the possibility that self-esteem mediates this relationship. 165 undergraduate women and 133 men (age 18-21; 42.6% Hispanic, 28.9% Asian, 28.5% Caucasian) completed items measuring personality traits (Big Five), self-esteem, and body esteem. Path analyses were used to test for mediation. The analyses confirmed that in both men and women self-esteem mediated the relationship between three personality traits and body esteem: higher levels of conscientiousness, emotional stability, and extraversion were associated with higher self-esteem and consequently higher body esteem. Once self-esteem was included in the model the relationships between personality traits and body esteem were not significant, suggesting full mediation. In addition, the analyses revealed several racial/ethnic differences. In Asian American participants, self-esteem mediated the relationship between conscientiousness and body esteem and between emotional stability and body esteem. In Hispanic Americans, self-esteem mediated the relationship between conscientiousness and body esteem and between extraversion and body esteem. And in Caucasian Americans, self-esteem mediated the relationship between emotional stability and body esteem and between extraversion and body esteem. The most important contribution of this study is evidence for an indirect relationship between personality traits and body esteem, with this relationship being mediated by self-esteem. This has important implications for the study of personality and eating disorders in young adults, most particularly implying a need for more emphasis on self-esteem as a predictor of body image problems.

Self-esteem as a mediator between personality traits and body esteem: path analyses across gender and race/ethnicity.

Directory of Open Access Journals (Sweden)

Małgorzata Skorek

Full Text Available Prior literature examines the direct relationship between personality traits and body esteem. This article explores the possibility that self-esteem mediates this relationship. 165 undergraduate women and 133 men (age 18-21; 42.6% Hispanic, 28.9% Asian, 28.5% Caucasian completed items measuring personality traits (Big Five, self-esteem, and body esteem. Path analyses were used to test for mediation. The analyses confirmed that in both men and women self-esteem mediated the relationship between three personality traits and body esteem: higher levels of conscientiousness, emotional stability, and extraversion were associated with higher self-esteem and consequently higher body esteem. Once self-esteem was included in the model the relationships between personality traits and body esteem were not significant, suggesting full mediation. In addition, the analyses revealed several racial/ethnic differences. In Asian American participants, self-esteem mediated the relationship between conscientiousness and body esteem and between emotional stability and body esteem. In Hispanic Americans, self-esteem mediated the relationship between conscientiousness and body esteem and between extraversion and body esteem. And in Caucasian Americans, self-esteem mediated the relationship between emotional stability and body esteem and between extraversion and body esteem. The most important contribution of this study is evidence for an indirect relationship between personality traits and body esteem, with this relationship being mediated by self-esteem. This has important implications for the study of personality and eating disorders in young adults, most particularly implying a need for more emphasis on self-esteem as a predictor of body image problems.

Self-Esteem as a Mediator between Personality Traits and Body Esteem: Path Analyses across Gender and Race/Ethnicity

Science.gov (United States)

Skorek, Małgorzata; Song, Anna V.; Dunham, Yarrow

2014-01-01

Prior literature examines the direct relationship between personality traits and body esteem. This article explores the possibility that self-esteem mediates this relationship. 165 undergraduate women and 133 men (age 18–21; 42.6% Hispanic, 28.9% Asian, 28.5% Caucasian) completed items measuring personality traits (Big Five), self-esteem, and body esteem. Path analyses were used to test for mediation. The analyses confirmed that in both men and women self-esteem mediated the relationship between three personality traits and body esteem: higher levels of conscientiousness, emotional stability, and extraversion were associated with higher self-esteem and consequently higher body esteem. Once self-esteem was included in the model the relationships between personality traits and body esteem were not significant, suggesting full mediation. In addition, the analyses revealed several racial/ethnic differences. In Asian American participants, self-esteem mediated the relationship between conscientiousness and body esteem and between emotional stability and body esteem. In Hispanic Americans, self-esteem mediated the relationship between conscientiousness and body esteem and between extraversion and body esteem. And in Caucasian Americans, self-esteem mediated the relationship between emotional stability and body esteem and between extraversion and body esteem. The most important contribution of this study is evidence for an indirect relationship between personality traits and body esteem, with this relationship being mediated by self-esteem. This has important implications for the study of personality and eating disorders in young adults, most particularly implying a need for more emphasis on self-esteem as a predictor of body image problems. PMID:25375238

Proceedings of the 2nd CSNI Specialist Meeting on Simulators and Plant Analysers

International Nuclear Information System (INIS)

Tiihonen, O.

1999-01-01

The safe utilisation of nuclear power plants requires the availability of different computerised tools for analysing the plant behaviour and training the plant personnel. These can be grouped into three categories: accident analysis codes, plant analysers and training simulators. The safety analysis of nuclear power plants has traditionally been limited to the worst accident cases expected for the specific plant design. Many accident analysis codes have been developed for different plant types. The scope of the analyses has continuously expanded. The plant analysers are now emerging tools intended for extensive analysis of the plant behaviour using a best estimate model for the whole plant including the reactor and full thermodynamic process, both combined with automation and electrical systems. The comprehensive model is also supported by good visualisation tools. Training simulators with real time plant model are tools for training the plant operators to run the plant. Modern training simulators have also features supporting visualisation of the important phenomena occurring in the plant during transients. The 2nd CSNI Specialist Meeting on Simulators and Plant Analysers in Espoo attracted some 90 participants from 17 countries. A total of 49 invited papers were presented in the meeting in addition to 7 simulator system demonstrations. Ample time was reserved for the presentations and informal discussions during the four meeting days. (orig.)

Total serum IgE level influences oral food challenge tests for IgE-mediated food allergies.

Science.gov (United States)

Horimukai, K; Hayashi, K; Tsumura, Y; Nomura, I; Narita, M; Ohya, Y; Saito, H; Matsumoto, K

2015-03-01

Probability curves predicting oral food challenge test (OFC) results based on specific IgE levels are widely used to prevent serious allergic reactions. Although several confounding factors are known to affect probability curves, the main factors that affect OFC outcomes are currently unclear. We hypothesized that an increased total IgE level would reduce allergic reactivity. Medical records of 337 and 266 patients who underwent OFCs for 3.5 g boiled hen's egg white and 3.1 ml raw cow's milk, respectively, were examined retrospectively. We subdivided the patients into three groups based on total IgE levels and age by percentile (75th percentiles), and logistic regression analyses were performed on each group. Patients with higher total IgE levels were significantly less responsive. In addition, age did not significantly affect the OFC results. Therefore, total IgE levels should be taken into account when predicting OFC results based on food-specific IgE levels. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A new support measure to quantify the impact of local optima in phylogenetic analyses.

KAUST Repository

Brammer, Grant; Sul, Seung-Jin; Williams, Tiffani L

2011-01-01

Phylogentic analyses are often incorrectly assumed to have stabilized to a single optimum. However, a set of trees from a phylogenetic analysis may contain multiple distinct local optima with each optimum providing different levels of support

Is the classical law of the addition of probabilities violated in quantum interference?

International Nuclear Information System (INIS)

Arsenovic, Dusan; Bozic, Mirjana; Vuskovic, Lepsa

2002-01-01

We analyse and compare the positive and negative arguments on whether quantum interference violates the classical law of the addition of probabilities. The analysis takes into account the results of recent interference experiments in neutron, electron and atom optics. Nonclassical behaviour of atoms was found in atomic experiments where the measurements included their time of arrival and space distribution. We determine probabilities of elementary events associated with the nonclassical behaviour of particles in interferometers. We show that the emergence of the interference pattern in the process of accumulation of such elementary events is consistent with the classical law of the addition of probabilities

Practical applications of probabilistic structural reliability analyses to primary pressure systems of nuclear power plants

International Nuclear Information System (INIS)

Witt, F.J.

1980-01-01

Primary pressure systems of nuclear power plants are built to exacting codes and standards with provisions for inservice inspection and repair if necessary. Analyses and experiments have demonstrated by deterministic means that very large margins exist on safety impacting failures under normal operating and upset conditions. Probabilistic structural reliability analyses provide additional support that failures of significance are very, very remote. They may range in degree of sophistication from very simple calculations to very complex computer analyses involving highly developed mathematical techniques. The end result however should be consistent with the desired usage. In this paper a probabilistic structural reliability analysis is performed as a supplement to in-depth deterministic evaluations with the primary objective to demonstrate an acceptably low probability of failure for the conditions considered. (author)

Analysis of Cyberbullying Sensitivity Levels of High School Students and Their Perceived Social Support Levels

Science.gov (United States)

Akturk, Ahmet Oguz

2015-01-01

Purpose: The purpose of this paper is to determine the cyberbullying sensitivity levels of high school students and their perceived social supports levels, and analyze the variables that predict cyberbullying sensitivity. In addition, whether cyberbullying sensitivity levels and social support levels differed according to gender was also…

The Use of Statistical Process Control Tools for Analysing Financial Statements

Directory of Open Access Journals (Sweden)

Niezgoda Janusz

2017-06-01

Full Text Available This article presents the proposed application of one type of the modified Shewhart control charts in the monitoring of changes in the aggregated level of financial ratios. The control chart x̅ has been used as a basis of analysis. The examined variable from the sample in the mentioned chart is the arithmetic mean. The author proposes to substitute it with a synthetic measure that is determined and based on the selected ratios. As the ratios mentioned above, are expressed in different units and characters, the author applies standardisation. The results of selected comparative analyses have been presented for both bankrupts and non-bankrupts. They indicate the possibility of using control charts as an auxiliary tool in financial analyses.

Bayesian Analysis of Individual Level Personality Dynamics

Directory of Open Access Journals (Sweden)

Edward Cripps

2016-07-01

Full Text Available A Bayesian technique with analyses of within-person processes at the level of the individual is presented. The approach is used to examine if the patterns of within-person responses on a 12 trial simulation task are consistent with the predictions of ITA theory (Dweck, 1999. ITA theory states that the performance of an individual with an entity theory of ability is more likely to spiral down following a failure experience than the performance of an individual with an incremental theory of ability. This is because entity theorists interpret failure experiences as evidence of a lack of ability, which they believe is largely innate and therefore relatively fixed; whilst incremental theorists believe in the malleability of abilities and interpret failure experiences as evidence of more controllable factors such as poor strategy or lack of effort. The results of our analyses support ITA theory at both the within- and between-person levels of analyses and demonstrate the benefits of Bayesian techniques for the analysis of within-person processes. These include more formal specification of the theory and the ability to draw inferences about each individual, which allows for more nuanced interpretations of individuals within a personality category, such as differences in the individual probabilities of spiralling. While Bayesian techniques have many potential advantages for the analyses of within-person processes at the individual level, ease of use is not one of them for psychologists trained in traditional frequentist statistical techniques.

Twenty years of meta-analyses in orthopaedic surgery: has quality kept up with quantity?

Science.gov (United States)

Dijkman, Bernadette G; Abouali, Jihad A K; Kooistra, Bauke W; Conter, Henry J; Poolman, Rudolf W; Kulkarni, Abhaya V; Tornetta, Paul; Bhandari, Mohit

2010-01-01

As the number of studies in the literature is increasing, orthopaedic surgeons highly depend on meta-analyses as their primary source of scientific evidence. The objectives of this review were to assess the scientific quality and number of published meta-analyses on orthopaedics-related topics over time. We conducted, in duplicate and independently, a systematic review of published meta-analyses in orthopaedics in the years 2005 and 2008 and compared them with a previous systematic review of meta-analyses from 1969 to 1999. A search of electronic databases (MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews) was performed to identify meta-analyses published in 2005 and 2008. We searched bibliographies and contacted content experts to identify additional relevant studies. Two investigators independently assessed the quality of the studies, using the Oxman and Guyatt index, and abstracted relevant data. We included forty-five and forty-four meta-analyses from 2005 and 2008, respectively. While the number of meta-analyses increased fivefold from 1999 to 2008, the mean quality score did not change significantly over time (p = 0.067). In the later years, a significantly lower proportion of meta-analyses had methodological flaws (56% in 2005 and 68% in 2008) compared with meta-analyses published prior to 2000 (88%) (p = 0.006). In 2005 and 2008, respectively, 18% and 30% of the meta-analyses had major to extensive flaws in their methodology. Studies from 2008 with positive conclusions used and described appropriate criteria for the validity assessment less often than did those with negative results. The use of random-effects and fixed-effects models as pooling methods became more popular toward 2008. Although the methodological quality of orthopaedic meta-analyses has increased in the past twenty years, a substantial proportion continues to show major to extensive flaws. As the number of published meta-analyses is increasing, a routine checklist for

Comparative proteomic analyses reveal that FlbA down-regulates gliT expression and SOD activity in Aspergillus fumigatus.

Science.gov (United States)

Shin, Kwang-Soo; Park, Hee-Soo; Kim, Young-Hwan; Yu, Jae-Hyuk

2013-07-11

FlbA is a regulator of G-protein signaling protein that plays a central role in attenuating heterotrimeric G-protein mediated vegetative growth signaling in Aspergillus. The deletion of flbA (∆flbA) in the opportunistic human pathogen Aspergillus fumigatus results in accelerated cell death and autolysis in submerged culture. To further investigate the effects of ∆flbA on intracellular protein levels we carried out 2-D proteome analyses of 2-day old submerged cultures of ∆flbA and wild type (WT) strains and observed 160 differentially expressed proteins. Via nano-LC-ESI-MS/MS analyses, we revealed the identity of 10 and 2 proteins exhibiting high and low level accumulation, respectively, in ∆flbA strain. Notably, the GliT protein is accumulated at about 1800-fold higher levels in ∆flbA than WT. Moreover, GliT is secreted at high levels from ∆flbA strain, whereas Sod1 (superoxide dismutase) is secreted at a higher level in WT. Northern blot analyses reveal that ∆flbA results in elevated accumulation of gliT mRNA. Consequently, ∆flbA strain exhibits enhanced tolerance to gliotoxin toxicity. Finally, ∆flbA strain displayed enhanced SOD activity and elevated resistance to menadione and paraquat. In summary, FlbA-mediated signaling control negatively affects cellular responses associated with detoxification of reactive oxygen species and of exogenous gliotoxin in A. fumigatus. Regulator of G protein Signaling (RGS) proteins play crucial roles in fundamental biological processes in filamentous fungi. FlbA is the first studied filamentous fungal RGS protein, yet much remains to be understood about its roles in the opportunistic human pathogen Aspergillus fumigatus. In the present study, we examined the effects of the deletion of flbA using comprehensive analyses of the intra- and extracellular proteomes of A. fumigatus wild type and the flbA deletion mutant. Via MS analyses, we identified 10 proteins exhibiting high level accumulation in the flbA deletion

Methodical treatment of dependent failures in risk analyses

International Nuclear Information System (INIS)

Hennings, W.; Mertens, J.

1987-06-01

In this report the state-of-the-art regarding dependent failures is compiled and commented on. Among others the following recommendations are infered: The term 'common mode failures' should be restricted to failures of redundant, similar components; the generic term is 'dependent failures' with the subsets 'causal failures' and 'common cause failures'. In risk studies, dependent failures should be covered as far as possible by 'explicit methods'. Nevertheless an uncovered rest remains, which should be accounted for by sensitivity analyses using 'implicit methods'. For this the homogeneous Marshall-Olkin model is recommended. Because the available reports on operating experiences only record 'common mode failures' systematically, it is recommended to additionally apply other methods, e.g. carry out a 'precursor study'. (orig.) [de

Low-level radioactive wastes. A bibliography of additions to the Energy Data Base in 1981

International Nuclear Information System (INIS)