WorldWideScience

Sample records for level set equation

  1. Transport equations, Level Set and Eulerian mechanics. Application to fluid-structure coupling

    International Nuclear Information System (INIS)

    Maitre, E.

    2008-11-01

    My works were devoted to numerical analysis of non-linear elliptic-parabolic equations, to neutron transport equation and to the simulation of fabrics draping. More recently I developed an Eulerian method based on a level set formulation of the immersed boundary method to deal with fluid-structure coupling problems arising in bio-mechanics. Some of the more efficient algorithms to solve the neutron transport equation make use of the splitting of the transport operator taking into account its characteristics. In the present work we introduced a new algorithm based on this splitting and an adaptation of minimal residual methods to infinite dimensional case. We present the case where the velocity space is of dimension 1 (slab geometry) and 2 (plane geometry) because the splitting is simpler in the former

  2. An accurate anisotropic adaptation method for solving the level set advection equation

    International Nuclear Information System (INIS)

    Bui, C.; Dapogny, C.; Frey, P.

    2012-01-01

    In the present paper, a mesh adaptation process for solving the advection equation on a fully unstructured computational mesh is introduced, with a particular interest in the case it implicitly describes an evolving surface. This process mainly relies on a numerical scheme based on the method of characteristics. However, low order, this scheme lends itself to a thorough analysis on the theoretical side. It gives rise to an anisotropic error estimate which enjoys a very natural interpretation in terms of the Hausdorff distance between the exact and approximated surfaces. The computational mesh is then adapted according to the metric supplied by this estimate. The whole process enjoys a good accuracy as far as the interface resolution is concerned. Some numerical features are discussed and several classical examples are presented and commented in two or three dimensions. (authors)

  3. STRICT STABILITY OF IMPULSIVE SET VALUED DIFFERENTIAL EQUATIONS

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    In this paper, we develop strict stability concepts of ODE to impulsive hybrid set valued differential equations. By Lyapunov’s original method, we get some basic strict stability criteria of impulsive hybrid set valued equations.

  4. On reinitializing level set functions

    Science.gov (United States)

    Min, Chohong

    2010-04-01

    In this paper, we consider reinitializing level functions through equation ϕt+sgn(ϕ0)(‖∇ϕ‖-1)=0[16]. The method of Russo and Smereka [11] is taken in the spatial discretization of the equation. The spatial discretization is, simply speaking, the second order ENO finite difference with subcell resolution near the interface. Our main interest is on the temporal discretization of the equation. We compare the three temporal discretizations: the second order Runge-Kutta method, the forward Euler method, and a Gauss-Seidel iteration of the forward Euler method. The fact that the time in the equation is fictitious makes a hypothesis that all the temporal discretizations result in the same result in their stationary states. The fact that the absolute stability region of the forward Euler method is not wide enough to include all the eigenvalues of the linearized semi-discrete system of the second order ENO spatial discretization makes another hypothesis that the forward Euler temporal discretization should invoke numerical instability. Our results in this paper contradict both the hypotheses. The Runge-Kutta and Gauss-Seidel methods obtain the second order accuracy, and the forward Euler method converges with order between one and two. Examining all their properties, we conclude that the Gauss-Seidel method is the best among the three. Compared to the Runge-Kutta, it is twice faster and requires memory two times less with the same accuracy.

  5. Sigma set scattering equations in nuclear reaction theory

    International Nuclear Information System (INIS)

    Kowalski, K.L.; Picklesimer, A.

    1982-01-01

    The practical applications of partially summed versions of the Rosenberg equations involving only special subsets (sigma sets) of the physical amplitudes are investigated with special attention to the Pauli principle. The requisite properties of the transformations from the pair labels to the set of partitions labeling the sigma set of asymptotic channels are established. New, well-defined, scattering integral equations for the antisymmetrized transition operators are found which possess much less coupling among the physically distinct channels than hitherto expected for equations with kernels of equal complexity. In several cases of physical interest in nuclear physics, a single connected-kernel equation is obtained for the relevant antisymmetrized elastic scattering amplitude

  6. Comparison of Fully-Compressible Equation Sets for Atmospheric Dynamics

    Science.gov (United States)

    Ahmad, Nashat N.

    2016-01-01

    Traditionally, the equation for the conservation of energy used in atmospheric models is based on potential temperature and is used in place of the total energy conservation. This paper compares the application of the two equations sets for both the Euler and the Navier-Stokes solutions using several benchmark test cases. A high-resolution wave-propagation method which accurately takes into account the source term due to gravity is used for computing the non-hydrostatic atmospheric flows. It is demonstrated that there is little to no difference between the results obtained using the two different equation sets for Euler as well as Navier-Stokes solutions.

  7. Set-Valued Stochastic Equation with Set-Valued Square Integrable Martingale

    Directory of Open Access Journals (Sweden)

    Li Jun-Gang

    2017-01-01

    Full Text Available In this paper, we shall introduce the stochastic integral of a stochastic process with respect to set-valued square integrable martingale. Then we shall give the Aumann integral measurable theorem, and give the set-valued stochastic Lebesgue integral and set-valued square integrable martingale integral equation. The existence and uniqueness of solution to set-valued stochastic integral equation are proved. The discussion will be useful in optimal control and mathematical finance in psychological factors.

  8. A Level Set Discontinuous Galerkin Method for Free Surface Flows

    DEFF Research Database (Denmark)

    Grooss, Jesper; Hesthaven, Jan

    2006-01-01

    We present a discontinuous Galerkin method on a fully unstructured grid for the modeling of unsteady incompressible fluid flows with free surfaces. The surface is modeled by embedding and represented by a levelset. We discuss the discretization of the flow equations and the level set equation...

  9. Impact of a proposed revision of the IESTI equation on the acute risk assessment conducted when setting maximum residue levels (MRLs) in the European Union (EU): A case study.

    Science.gov (United States)

    Breysse, Nicolas; Vial, Gaelle; Pattingre, Lauriane; Ossendorp, Bernadette C; Mahieu, Karin; Reich, Hermine; Rietveld, Anton; Sieke, Christian; van der Velde-Koerts, Trijntje; Sarda, Xavier

    2018-06-03

    Proposals to update the methodology for the international estimated short-term intake (IESTI) equations were made during an international workshop held in Geneva in 2015. Changes to several parameters of the current four IESTI equations (cases 1, 2a, 2b, and 3) were proposed. In this study, the overall impact of these proposed changes on estimates of short-term exposure was studied using the large portion data available in the European Food Safety Authority PRIMo model and the residue data submitted in the framework of the European Maximum Residue Levels (MRL) review under Article 12 of Regulation (EC) No 396/2005. Evaluation of consumer exposure using the current and proposed equations resulted in substantial differences in the exposure estimates; however, there were no significant changes regarding the number of accepted MRLs. For the different IESTI cases, the median ratio of the new versus the current equation is 1.1 for case 1, 1.4 for case 2a, 0.75 for case 2b, and 1 for case 3. The impact, expressed as a shift in the IESTI distribution profile, indicated that the 95th percentile IESTI shifted from 50% of the acute reference dose (ARfD) with the current equations to 65% of the ARfD with the proposed equations. This IESTI increase resulted in the loss of 1.2% of the MRLs (37 out of 3110) tested within this study. At the same time, the proposed equations would have allowed 0.4% of the MRLs (14 out of 3110) that were rejected with the current equations to be accepted. The commodity groups that were most impacted by these modifications are solanacea (e.g., potato, eggplant), lettuces, pulses (dry), leafy brassica (e.g., kale, Chinese cabbage), and pome fruits. The active substances that were most affected were fluazifop-p-butyl, deltamethrin, and lambda-cyhalothrin.

  10. Fast Sparse Level Sets on Graphics Hardware

    NARCIS (Netherlands)

    Jalba, Andrei C.; Laan, Wladimir J. van der; Roerdink, Jos B.T.M.

    The level-set method is one of the most popular techniques for capturing and tracking deformable interfaces. Although level sets have demonstrated great potential in visualization and computer graphics applications, such as surface editing and physically based modeling, their use for interactive

  11. Exploring the level sets of quantum control landscapes

    International Nuclear Information System (INIS)

    Rothman, Adam; Ho, Tak-San; Rabitz, Herschel

    2006-01-01

    A quantum control landscape is defined by the value of a physical observable as a functional of the time-dependent control field E(t) for a given quantum-mechanical system. Level sets through this landscape are prescribed by a particular value of the target observable at the final dynamical time T, regardless of the intervening dynamics. We present a technique for exploring a landscape level set, where a scalar variable s is introduced to characterize trajectories along these level sets. The control fields E(s,t) accomplishing this exploration (i.e., that produce the same value of the target observable for a given system) are determined by solving a differential equation over s in conjunction with the time-dependent Schroedinger equation. There is full freedom to traverse a level set, and a particular trajectory is realized by making an a priori choice for a continuous function f(s,t) that appears in the differential equation for the control field. The continuous function f(s,t) can assume an arbitrary form, and thus a level set generally contains a family of controls, where each control takes the quantum system to the same final target value, but produces a distinct control mechanism. In addition, although the observable value remains invariant over the level set, other dynamical properties (e.g., the degree of robustness to control noise) are not specifically preserved and can vary greatly. Examples are presented to illustrate the continuous nature of level-set controls and their associated induced dynamical features, including continuously morphing mechanisms for population control in model quantum systems

  12. Differential geometry techniques for sets of nonlinear partial differential equations

    Science.gov (United States)

    Estabrook, Frank B.

    1990-01-01

    An attempt is made to show that the Cartan theory of partial differential equations can be a useful technique for applied mathematics. Techniques for finding consistent subfamilies of solutions that are generically rich and well-posed and for introducing potentials or other usefully consistent auxiliary fields are introduced. An extended sample calculation involving the Korteweg-de Vries equation is given.

  13. Generalized Freud's equation and level densities with polynomial

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 81; Issue 2. Generalized Freud's equation and level densities with polynomial potential. Akshat Boobna Saugata Ghosh. Research Articles Volume 81 ... Keywords. Orthogonal polynomial; Freud's equation; Dyson–Mehta method; methods of resolvents; level density.

  14. Maxwell’s Equations on Cantor Sets: A Local Fractional Approach

    Directory of Open Access Journals (Sweden)

    Yang Zhao

    2013-01-01

    Full Text Available Maxwell’s equations on Cantor sets are derived from the local fractional vector calculus. It is shown that Maxwell’s equations on Cantor sets in a fractal bounded domain give efficiency and accuracy for describing the fractal electric and magnetic fields. Local fractional differential forms of Maxwell’s equations on Cantor sets in the Cantorian and Cantor-type cylindrical coordinates are obtained. Maxwell's equations on Cantor set with local fractional operators are the first step towards a unified theory of Maxwell’s equations for the dynamics of cold dark matter.

  15. Function spaces and partial differential equations 2 volume set

    CERN Document Server

    Taheri, Ali

    2015-01-01

    This is a book written primarily for graduate students and early researchers in the fields of Analysis and Partial Differential Equations (PDEs). Coverage of the material is essentially self-contained, extensive and novel with great attention to details and rigour.

  16. Application of Local Fractional Series Expansion Method to Solve Klein-Gordon Equations on Cantor Sets

    Directory of Open Access Journals (Sweden)

    Ai-Min Yang

    2014-01-01

    Full Text Available We use the local fractional series expansion method to solve the Klein-Gordon equations on Cantor sets within the local fractional derivatives. The analytical solutions within the nondifferential terms are discussed. The obtained results show the simplicity and efficiency of the present technique with application to the problems of the liner differential equations on Cantor sets.

  17. Solving Fokker-Planck Equations on Cantor Sets Using Local Fractional Decomposition Method

    Directory of Open Access Journals (Sweden)

    Shao-Hong Yan

    2014-01-01

    Full Text Available The local fractional decomposition method is applied to approximate the solutions for Fokker-Planck equations on Cantor sets with local fractional derivative. The obtained results give the present method that is very effective and simple for solving the differential equations on Cantor set.

  18. 3-D resistive MHD calculations for tokamak plasmas: beyond the simple reduced set of equations

    International Nuclear Information System (INIS)

    Carreras, B.A.; Garcia, L.; Hender, T.C.; Hicks, H.R.; Holmes, J.A.; Lynch, V.E.; Masden, B.F.

    1983-01-01

    Numerical studies of the resistive stability of tokamak plasmas in cylindrical geometry have been performed using: (1) the full set of resistive Magnetohydrodynamic (MHD) equations and (2) an extended version of the reduced set of resistive MHD equations including diamagnetic and electron temperature effects. In particular, the nonlinear interaction of tearing modes of many helicities has been investigated. The numerical results confirm many of the features uncovered previously using the simple reduced equations. (author)

  19. Set of difference spitting schemes for solving the Navier-Stokes incompressible equations in natural variables

    International Nuclear Information System (INIS)

    Koleshko, S.B.

    1989-01-01

    A three-parametric set of difference schemes is suggested to solve Navier-Stokes equations with the use of the relaxation form of the continuity equation. The initial equations are stated for time increments. Use is made of splitting the operator into one-dimensional forms that reduce calculations to scalar factorizations. Calculated results for steady- and unsteady-state flows in a cavity are presented

  20. Set-valued and fuzzy stochastic integral equations driven by semimartingales under Osgood condition

    Directory of Open Access Journals (Sweden)

    Malinowski Marek T.

    2015-01-01

    Full Text Available We analyze the set-valued stochastic integral equations driven by continuous semimartingales and prove the existence and uniqueness of solutions to such equations in the framework of the hyperspace of nonempty, bounded, convex and closed subsets of the Hilbert space L2 (consisting of square integrable random vectors. The coefficients of the equations are assumed to satisfy the Osgood type condition that is a generalization of the Lipschitz condition. Continuous dependence of solutions with respect to data of the equation is also presented. We consider equations driven by semimartingale Z and equations driven by processes A;M from decomposition of Z, where A is a process of finite variation and M is a local martingale. These equations are not equivalent. Finally, we show that the analysis of the set-valued stochastic integral equations can be extended to a case of fuzzy stochastic integral equations driven by semimartingales under Osgood type condition. To obtain our results we use the set-valued and fuzzy Maruyama type approximations and Bihari’s inequality.

  1. Local Fractional Series Expansion Method for Solving Wave and Diffusion Equations on Cantor Sets

    Directory of Open Access Journals (Sweden)

    Ai-Min Yang

    2013-01-01

    Full Text Available We proposed a local fractional series expansion method to solve the wave and diffusion equations on Cantor sets. Some examples are given to illustrate the efficiency and accuracy of the proposed method to obtain analytical solutions to differential equations within the local fractional derivatives.

  2. Level Set Approach to Anisotropic Wet Etching of Silicon

    Directory of Open Access Journals (Sweden)

    Branislav Radjenović

    2010-05-01

    Full Text Available In this paper a methodology for the three dimensional (3D modeling and simulation of the profile evolution during anisotropic wet etching of silicon based on the level set method is presented. Etching rate anisotropy in silicon is modeled taking into account full silicon symmetry properties, by means of the interpolation technique using experimentally obtained values for the etching rates along thirteen principal and high index directions in KOH solutions. The resulting level set equations are solved using an open source implementation of the sparse field method (ITK library, developed in medical image processing community, extended for the case of non-convex Hamiltonians. Simulation results for some interesting initial 3D shapes, as well as some more practical examples illustrating anisotropic etching simulation in the presence of masks (simple square aperture mask, convex corner undercutting and convex corner compensation, formation of suspended structures are shown also. The obtained results show that level set method can be used as an effective tool for wet etching process modeling, and that is a viable alternative to the Cellular Automata method which now prevails in the simulations of the wet etching process.

  3. Transport and diffusion of material quantities on propagating interfaces via level set methods

    CERN Document Server

    Adalsteinsson, D

    2003-01-01

    We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies.

  4. Transport and diffusion of material quantities on propagating interfaces via level set methods

    International Nuclear Information System (INIS)

    Adalsteinsson, David; Sethian, J.A.

    2003-01-01

    We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies

  5. Generalized Freud's equation and level densities with polynomial potential

    Science.gov (United States)

    Boobna, Akshat; Ghosh, Saugata

    2013-08-01

    We study orthogonal polynomials with weight $\\exp[-NV(x)]$, where $V(x)=\\sum_{k=1}^{d}a_{2k}x^{2k}/2k$ is a polynomial of order 2d. We derive the generalised Freud's equations for $d=3$, 4 and 5 and using this obtain $R_{\\mu}=h_{\\mu}/h_{\\mu -1}$, where $h_{\\mu}$ is the normalization constant for the corresponding orthogonal polynomials. Moments of the density functions, expressed in terms of $R_{\\mu}$, are obtained using Freud's equation and using this, explicit results of level densities as $N\\rightarrow\\infty$ are derived.

  6. Gradient augmented level set method for phase change simulations

    Science.gov (United States)

    Anumolu, Lakshman; Trujillo, Mario F.

    2018-01-01

    A numerical method for the simulation of two-phase flow with phase change based on the Gradient-Augmented-Level-set (GALS) strategy is presented. Sharp capturing of the vaporization process is enabled by: i) identification of the vapor-liquid interface, Γ (t), at the subgrid level, ii) discontinuous treatment of thermal physical properties (except for μ), and iii) enforcement of mass, momentum, and energy jump conditions, where the gradients of the dependent variables are obtained at Γ (t) and are consistent with their analytical expression, i.e. no local averaging is applied. Treatment of the jump in velocity and pressure at Γ (t) is achieved using the Ghost Fluid Method. The solution of the energy equation employs the sub-grid knowledge of Γ (t) to discretize the temperature Laplacian using second-order one-sided differences, i.e. the numerical stencil completely resides within each respective phase. To carefully evaluate the benefits or disadvantages of the GALS approach, the standard level set method is implemented and compared against the GALS predictions. The results show the expected trend that interface identification and transport are predicted noticeably better with GALS over the standard level set. This benefit carries over to the prediction of the Laplacian and temperature gradients in the neighborhood of the interface, which are directly linked to the calculation of the vaporization rate. However, when combining the calculation of interface transport and reinitialization with two-phase momentum and energy, the benefits of GALS are to some extent neutralized, and the causes for this behavior are identified and analyzed. Overall the additional computational costs associated with GALS are almost the same as those using the standard level set technique.

  7. Level-set techniques for facies identification in reservoir modeling

    Science.gov (United States)

    Iglesias, Marco A.; McLaughlin, Dennis

    2011-03-01

    In this paper we investigate the application of level-set techniques for facies identification in reservoir models. The identification of facies is a geometrical inverse ill-posed problem that we formulate in terms of shape optimization. The goal is to find a region (a geologic facies) that minimizes the misfit between predicted and measured data from an oil-water reservoir. In order to address the shape optimization problem, we present a novel application of the level-set iterative framework developed by Burger in (2002 Interfaces Free Bound. 5 301-29 2004 Inverse Problems 20 259-82) for inverse obstacle problems. The optimization is constrained by (the reservoir model) a nonlinear large-scale system of PDEs that describes the reservoir dynamics. We reformulate this reservoir model in a weak (integral) form whose shape derivative can be formally computed from standard results of shape calculus. At each iteration of the scheme, the current estimate of the shape derivative is utilized to define a velocity in the level-set equation. The proper selection of this velocity ensures that the new shape decreases the cost functional. We present results of facies identification where the velocity is computed with the gradient-based (GB) approach of Burger (2002) and the Levenberg-Marquardt (LM) technique of Burger (2004). While an adjoint formulation allows the straightforward application of the GB approach, the LM technique requires the computation of the large-scale Karush-Kuhn-Tucker system that arises at each iteration of the scheme. We efficiently solve this system by means of the representer method. We present some synthetic experiments to show and compare the capabilities and limitations of the proposed implementations of level-set techniques for the identification of geologic facies.

  8. Level-set techniques for facies identification in reservoir modeling

    International Nuclear Information System (INIS)

    Iglesias, Marco A; McLaughlin, Dennis

    2011-01-01

    In this paper we investigate the application of level-set techniques for facies identification in reservoir models. The identification of facies is a geometrical inverse ill-posed problem that we formulate in terms of shape optimization. The goal is to find a region (a geologic facies) that minimizes the misfit between predicted and measured data from an oil–water reservoir. In order to address the shape optimization problem, we present a novel application of the level-set iterative framework developed by Burger in (2002 Interfaces Free Bound. 5 301–29; 2004 Inverse Problems 20 259–82) for inverse obstacle problems. The optimization is constrained by (the reservoir model) a nonlinear large-scale system of PDEs that describes the reservoir dynamics. We reformulate this reservoir model in a weak (integral) form whose shape derivative can be formally computed from standard results of shape calculus. At each iteration of the scheme, the current estimate of the shape derivative is utilized to define a velocity in the level-set equation. The proper selection of this velocity ensures that the new shape decreases the cost functional. We present results of facies identification where the velocity is computed with the gradient-based (GB) approach of Burger (2002) and the Levenberg–Marquardt (LM) technique of Burger (2004). While an adjoint formulation allows the straightforward application of the GB approach, the LM technique requires the computation of the large-scale Karush–Kuhn–Tucker system that arises at each iteration of the scheme. We efficiently solve this system by means of the representer method. We present some synthetic experiments to show and compare the capabilities and limitations of the proposed implementations of level-set techniques for the identification of geologic facies

  9. Two-level schemes for the advection equation

    Science.gov (United States)

    Vabishchevich, Petr N.

    2018-06-01

    The advection equation is the basis for mathematical models of continuum mechanics. In the approximate solution of nonstationary problems it is necessary to inherit main properties of the conservatism and monotonicity of the solution. In this paper, the advection equation is written in the symmetric form, where the advection operator is the half-sum of advection operators in conservative (divergent) and non-conservative (characteristic) forms. The advection operator is skew-symmetric. Standard finite element approximations in space are used. The standard explicit two-level scheme for the advection equation is absolutely unstable. New conditionally stable regularized schemes are constructed, on the basis of the general theory of stability (well-posedness) of operator-difference schemes, the stability conditions of the explicit Lax-Wendroff scheme are established. Unconditionally stable and conservative schemes are implicit schemes of the second (Crank-Nicolson scheme) and fourth order. The conditionally stable implicit Lax-Wendroff scheme is constructed. The accuracy of the investigated explicit and implicit two-level schemes for an approximate solution of the advection equation is illustrated by the numerical results of a model two-dimensional problem.

  10. Infinite sets of conservation laws for linear and nonlinear field equations

    International Nuclear Information System (INIS)

    Mickelsson, J.

    1984-01-01

    The relation between an infinite set of conservation laws of a linear field equation and the enveloping algebra of the space-time symmetry group is established. It is shown that each symmetric element of the enveloping algebra of the space-time symmetry group of a linear field equation generates a one-parameter group of symmetries of the field equation. The cases of the Maxwell and Dirac equations are studied in detail. Then it is shown that (at least in the sense of a power series in the 'coupling constant') the conservation laws of the linear case can be deformed to conservation laws of a nonlinear field equation which is obtained from the linear one by adding a nonlinear term invariant under the group of space-time symmetries. As an example, our method is applied to the Korteweg-de Vries equation and to the massless Thirring model. (orig.)

  11. Using of Structural Equation Modeling Techniques in Cognitive Levels Validation

    Directory of Open Access Journals (Sweden)

    Natalija Curkovic

    2012-10-01

    Full Text Available When constructing knowledge tests, cognitive level is usually one of the dimensions comprising the test specifications with each item assigned to measure a particular level. Recently used taxonomies of the cognitive levels most often represent some modification of the original Bloom’s taxonomy. There are many concerns in current literature about existence of predefined cognitive levels. The aim of this article is to investigate can structural equation modeling techniques confirm existence of different cognitive levels. For the purpose of the research, a Croatian final high-school Mathematics exam was used (N = 9626. Confirmatory factor analysis and structural regression modeling were used to test three different models. Structural equation modeling techniques did not support existence of different cognitive levels in this case. There is more than one possible explanation for that finding. Some other techniques that take into account nonlinear behaviour of the items as well as qualitative techniques might be more useful for the purpose of the cognitive levels validation. Furthermore, it seems that cognitive levels were not efficient descriptors of the items and so improvements are needed in describing the cognitive skills measured by items.

  12. Level crossing analysis of Burgers equation in 1 + 1 dimensions

    International Nuclear Information System (INIS)

    Movahed, M Sadegh; Bahraminasab, A; Rezazadeh, H; Masoudi, A A

    2006-01-01

    We investigate the average frequency of positive slope ν + α , crossing the velocity field u(x) - u-bar = α in the Burgers equation. The level crossing analysis in the inviscid limit and the total number of positive crossings of the velocity field before the creation of singularities are given. The main goal of this paper is to show that this quantity, ν + α , is a good measure for the fluctuations of velocity fields in the Burgers turbulence

  13. A set of exact two soliton wave solutions to Einstein field equations

    International Nuclear Information System (INIS)

    Wang Youtang; He Zhixian

    1991-09-01

    A set of exact solutions of Einstein equations in vacuum is obtained. Taking this set of solutions as seed solutions and making use of the Belinsky-Zakharov generation technique a set of generated solutions is constructed. Both set of exact solutions and a set of generated solutions describe two solition waves, which propagate in opposite directions and collide with each other, and then recover their original shapes. The singularities of the two set of solutions are analyzed. The relationship between our solutions and other solutions is also discussed. (author). 11 refs, 4 figs

  14. On Models with Uncountable Set of Spin Values on a Cayley Tree: Integral Equations

    International Nuclear Information System (INIS)

    Rozikov, Utkir A.; Eshkobilov, Yusup Kh.

    2010-01-01

    We consider models with nearest-neighbor interactions and with the set [0, 1] of spin values, on a Cayley tree of order k ≥ 1. We reduce the problem of describing the 'splitting Gibbs measures' of the model to the description of the solutions of some nonlinear integral equation. For k = 1 we show that the integral equation has a unique solution. In case k ≥ 2 some models (with the set [0, 1] of spin values) which have a unique splitting Gibbs measure are constructed. Also for the Potts model with uncountable set of spin values it is proven that there is unique splitting Gibbs measure.

  15. Solving large sets of coupled equations iteratively by vector processing on the CYBER 205 computer

    International Nuclear Information System (INIS)

    Tolsma, L.D.

    1985-01-01

    The set of coupled linear second-order differential equations which has to be solved for the quantum-mechanical description of inelastic scattering of atomic and nuclear particles can be rewritten as an equivalent set of coupled integral equations. When some type of functions is used as piecewise analytic reference solutions, the integrals that arise in this set can be evaluated analytically. The set of integral equations can be solved iteratively. For the results mentioned an inward-outward iteration scheme has been applied. A concept of vectorization of coupled-channel Fortran programs, based on this integral method, is presented for the use on the Cyber 205 computer. It turns out that, for two heavy ion nuclear scattering test cases, this vector algorithm gives an overall speed-up of about a factor of 2 to 3 compared to a highly optimized scalar algorithm for a one vector pipeline computer

  16. Infinite sets of conservation laws for linear and non-linear field equations

    International Nuclear Information System (INIS)

    Niederle, J.

    1984-01-01

    The work was motivated by a desire to understand group theoretically the existence of an infinite set of conservation laws for non-interacting fields and to carry over these conservation laws to the case of interacting fields. The relation between an infinite set of conservation laws of a linear field equation and the enveloping algebra of its space-time symmetry group was established. It is shown that in the case of the Korteweg-de Vries (KdV) equation to each symmetry of the corresponding linear equation delta sub(o)uxxx=u sub() determined by an element of the enveloping algebra of the space translation algebra, there corresponds a symmetry of the full KdV equation

  17. A reduced set of gyrofluid equations for plasma flow in a diverging magnetic field

    International Nuclear Information System (INIS)

    Robertson, Scott

    2016-01-01

    Plasmas are often generated in a small diameter source with a strong magnetic field and subsequently flow into a region with greater diameter and smaller field. The magnetic mirror force that accelerates plasma in a diverging magnetic field appears in the gyrofluid equations developed for applications to toroidal devices, but this force is often absent from fluid equations. A set of gyrofluid equations with reduced complexity is developed in which drifts are assumed negligible and the mirror force is retained. The Chew–Goldberger–Low equations of state are used for a simple closure. These reduced gyrofluid equations are applied to plasma equilibrium in a magnetic mirror, to acceleration of plasma in a magnetic nozzle, and to space charge neutralization of an ion beam by electrons in a diverging magnetic field. The results from gyrofluid theory are compared with results from drift kinetic theory to find the accuracy of the gyrofluid approximation in these applications.

  18. New Approaches for Solving Fokker Planck Equation on Cantor Sets within Local Fractional Operators

    Directory of Open Access Journals (Sweden)

    Hassan Kamil Jassim

    2015-01-01

    Full Text Available We discuss new approaches to handling Fokker Planck equation on Cantor sets within local fractional operators by using the local fractional Laplace decomposition and Laplace variational iteration methods based on the local fractional calculus. The new approaches maintain the efficiency and accuracy of the analytical methods for solving local fractional differential equations. Illustrative examples are given to show the accuracy and reliable results.

  19. Setting the stage for master's level success

    Science.gov (United States)

    Roberts, Donna

    Comprehensive reading, writing, research, and study skills play a critical role in a graduate student's success and ability to contribute to a field of study effectively. The literature indicated a need to support graduate student success in the areas of mentoring, navigation, as well as research and writing. The purpose of this two-phased mixed methods explanatory study was to examine factors that characterize student success at the Master's level in the fields of education, sociology and social work. The study was grounded in a transformational learning framework which focused on three levels of learning: technical knowledge, practical or communicative knowledge, and emancipatory knowledge. The study included two data collection points. Phase one consisted of a Master's Level Success questionnaire that was sent via Qualtrics to graduate level students at three colleges and universities in the Central Valley of California: a California State University campus, a University of California campus, and a private college campus. The results of the chi-square indicated that seven questionnaire items were significant with p values less than .05. Phase two in the data collection included semi-structured interview questions that resulted in three themes emerged using Dedoose software: (1) the need for more language and writing support at the Master's level, (2) the need for mentoring, especially for second-language learners, and (3) utilizing the strong influence of faculty in student success. It is recommended that institutions continually assess and strengthen their programs to meet the full range of learners and to support students to degree completion.

  20. Multi-phase flow monitoring with electrical impedance tomography using level set based method

    International Nuclear Information System (INIS)

    Liu, Dong; Khambampati, Anil Kumar; Kim, Sin; Kim, Kyung Youn

    2015-01-01

    Highlights: • LSM has been used for shape reconstruction to monitor multi-phase flow using EIT. • Multi-phase level set model for conductivity is represented by two level set functions. • LSM handles topological merging and breaking naturally during evolution process. • To reduce the computational time, a narrowband technique was applied. • Use of narrowband and optimization approach results in efficient and fast method. - Abstract: In this paper, a level set-based reconstruction scheme is applied to multi-phase flow monitoring using electrical impedance tomography (EIT). The proposed scheme involves applying a narrowband level set method to solve the inverse problem of finding the interface between the regions having different conductivity values. The multi-phase level set model for the conductivity distribution inside the domain is represented by two level set functions. The key principle of the level set-based method is to implicitly represent the shape of interface as the zero level set of higher dimensional function and then solve a set of partial differential equations. The level set-based scheme handles topological merging and breaking naturally during the evolution process. It also offers several advantages compared to traditional pixel-based approach. Level set-based method for multi-phase flow is tested with numerical and experimental data. It is found that level set-based method has better reconstruction performance when compared to pixel-based method

  1. Development of a set of benchmark problems to verify numerical methods for solving burnup equations

    International Nuclear Information System (INIS)

    Lago, Daniel; Rahnema, Farzad

    2017-01-01

    Highlights: • Description transmutation chain benchmark problems. • Problems for validating numerical methods for solving burnup equations. • Analytical solutions for the burnup equations. • Numerical solutions for the burnup equations. - Abstract: A comprehensive set of transmutation chain benchmark problems for numerically validating methods for solving burnup equations was created. These benchmark problems were designed to challenge both traditional and modern numerical methods used to solve the complex set of ordinary differential equations used for tracking the change in nuclide concentrations over time due to nuclear phenomena. Given the development of most burnup solvers is done for the purpose of coupling with an established transport solution method, these problems provide a useful resource in testing and validating the burnup equation solver before coupling for use in a lattice or core depletion code. All the relevant parameters for each benchmark problem are described. Results are also provided in the form of reference solutions generated by the Mathematica tool, as well as additional numerical results from MATLAB.

  2. The geometric approach to sets of ordinary differential equations and Hamiltonian dynamics

    Science.gov (United States)

    Estabrook, F. B.; Wahlquist, H. D.

    1975-01-01

    The calculus of differential forms is used to discuss the local integration theory of a general set of autonomous first order ordinary differential equations. Geometrically, such a set is a vector field V in the space of dependent variables. Integration consists of seeking associated geometric structures invariant along V: scalar fields, forms, vectors, and integrals over subspaces. It is shown that to any field V can be associated a Hamiltonian structure of forms if, when dealing with an odd number of dependent variables, an arbitrary equation of constraint is also added. Families of integral invariants are an immediate consequence. Poisson brackets are isomorphic to Lie products of associated CT-generating vector fields. Hamilton's variational principle follows from the fact that the maximal regular integral manifolds of a closed set of forms must include the characteristics of the set.

  3. Multicomponent fluid flow analysis using a new set of conservation equations

    International Nuclear Information System (INIS)

    Kamali, Reza; Emdad, Homayoon; Alishahi, Mohammad M

    2008-01-01

    In this work hydrodynamics of multicomponent ideal gas mixtures have been studied. Starting from the kinetic equations, the Eulerian approach is used to derive a new set of conservation equations for the multicomponent system where each component may have different velocity and kinetic temperature. The equations are based on the Grad's method of moment derived from the kinetic model in a relaxation time approximation (RTA). Based on this model which contains separate equation sets for each component of the system, a computer code has been developed for numerical computation of compressible flows of binary gas mixture in generalized curvilinear boundary conforming coordinates. Since these equations are similar to the Navier-Stokes equations for the single fluid systems, the same numerical methods are applied to these new equations. The Roe's numerical scheme is used to discretize the convective terms of governing fluid flow equations. The prepared algorithm and the computer code are capable of computing and presenting flow fields of each component of the system separately as well as the average flow field of the multicomponent gas system as a whole. Comparison of the present code results with those of a more common algorithm based on the mixture theory in a supersonic converging-diverging nozzle provides the validation of the present formulation. Afterwards, a more involved nozzle cooling problem with a binary ideal gas (helium-xenon) is chosen to compare the present results with those of the ordinary mixture theory. The present model provides the details of the flow fields of each component separately which is not available otherwise. It is also shown that the separate fluids treatment, such as the present study, is crucial when considering time scales on the order of (or shorter than) the intercollisions relaxation times.

  4. A local level set method based on a finite element method for unstructured meshes

    International Nuclear Information System (INIS)

    Ngo, Long Cu; Choi, Hyoung Gwon

    2016-01-01

    A local level set method for unstructured meshes has been implemented by using a finite element method. A least-square weighted residual method was employed for implicit discretization to solve the level set advection equation. By contrast, a direct re-initialization method, which is directly applicable to the local level set method for unstructured meshes, was adopted to re-correct the level set function to become a signed distance function after advection. The proposed algorithm was constructed such that the advection and direct reinitialization steps were conducted only for nodes inside the narrow band around the interface. Therefore, in the advection step, the Gauss–Seidel method was used to update the level set function using a node-by-node solution method. Some benchmark problems were solved by using the present local level set method. Numerical results have shown that the proposed algorithm is accurate and efficient in terms of computational time

  5. A local level set method based on a finite element method for unstructured meshes

    Energy Technology Data Exchange (ETDEWEB)

    Ngo, Long Cu; Choi, Hyoung Gwon [School of Mechanical Engineering, Seoul National University of Science and Technology, Seoul (Korea, Republic of)

    2016-12-15

    A local level set method for unstructured meshes has been implemented by using a finite element method. A least-square weighted residual method was employed for implicit discretization to solve the level set advection equation. By contrast, a direct re-initialization method, which is directly applicable to the local level set method for unstructured meshes, was adopted to re-correct the level set function to become a signed distance function after advection. The proposed algorithm was constructed such that the advection and direct reinitialization steps were conducted only for nodes inside the narrow band around the interface. Therefore, in the advection step, the Gauss–Seidel method was used to update the level set function using a node-by-node solution method. Some benchmark problems were solved by using the present local level set method. Numerical results have shown that the proposed algorithm is accurate and efficient in terms of computational time.

  6. On the solution set for a class of sequential fractional differential equations

    International Nuclear Information System (INIS)

    Baleanu, Dumitru; Mustafa, Octavian G; Agarwal, Ravi P

    2010-01-01

    We establish here that under some simple restrictions on the functional coefficient a(t) the solution set of the fractional differential equation ( 0 D α t x)' + a(t)x = 0 splits between eventually small and eventually large solutions as t → +∞, where 0 D α t designates the Riemann-Liouville derivative of the order α in (0, 1).

  7. Compact invariant sets of the static spherically symmetric Einstein-Yang-Mills equations

    International Nuclear Information System (INIS)

    Starkov, Konstantin E.

    2010-01-01

    In this Letter we obtain results concerning compact invariant sets of the static spherically symmetric Einstein-Yang-Mills (EYM) equations with help of studies of its localization. Let a be a cosmological constant and s be another parameter entering into these equations which is used for considering the physical time as a temporal variable, with s=1, while s=-1 is used for considering the physical time as a spatial variable. We show that in case s=1; a 0 the set of all compact invariant sets consists of two equilibrium points only. Further, we state that in cases s=-1; a 0 there are only two equilibrium points and there are no periodic orbits. In addition, we prove that in the last two cases there are neither homoclinic orbits nor heteroclinic orbits as well.

  8. A simple mass-conserved level set method for simulation of multiphase flows

    Science.gov (United States)

    Yuan, H.-Z.; Shu, C.; Wang, Y.; Shu, S.

    2018-04-01

    In this paper, a modified level set method is proposed for simulation of multiphase flows with large density ratio and high Reynolds number. The present method simply introduces a source or sink term into the level set equation to compensate the mass loss or offset the mass increase. The source or sink term is derived analytically by applying the mass conservation principle with the level set equation and the continuity equation of flow field. Since only a source term is introduced, the application of the present method is as simple as the original level set method, but it can guarantee the overall mass conservation. To validate the present method, the vortex flow problem is first considered. The simulation results are compared with those from the original level set method, which demonstrates that the modified level set method has the capability of accurately capturing the interface and keeping the mass conservation. Then, the proposed method is further validated by simulating the Laplace law, the merging of two bubbles, a bubble rising with high density ratio, and Rayleigh-Taylor instability with high Reynolds number. Numerical results show that the mass is a well-conserved by the present method.

  9. Spinless Salpeter equation: Laguerre bounds on energy levels

    International Nuclear Information System (INIS)

    Lucha, W.; Schoeberl, F.F.

    1996-08-01

    The spinless Salpeter equation may be considered either as a standard approximation to the Bethe-Salpeter formalism, designed for the description of bound states within a relativistic quantum field theory, or as the most simple, to a certain extent relativistic generalization of the customary non relativistic Schroedinger formalism. Because of the presence of the rather difficult-to-handle square-root operator of the relativistic kinetic energy in the corresponding Hamiltonian, very frequently the corresponding (discrete) spectrum of energy eigenvalues cannot be determined analytically. Therefore, we show how to calculate, by some clever choice of basis vectors in the Hilbert space of solutions, for the rather large class of power-law potentials, at least (sometimes excellent) upper bounds on these energy eigenvalues, for the lowest-lying levels this even analytically. (author)

  10. Validity of a population-specific BMR predictive equation for adults from an urban tropical setting.

    Science.gov (United States)

    Wahrlich, Vivian; Teixeira, Tatiana Miliante; Anjos, Luiz Antonio Dos

    2018-02-01

    Basal metabolic rate (BMR) is an important physiologic measure in nutrition research. In many instances it is not measured but estimated by predictive equations. The purpose of this study was to compare measured BMR (BMRm) with estimated BMR (BMRe) obtained by different equations. A convenient sample of 148 (89 women) 20-60 year-old subjects from the metropolitan area of Rio de Janeiro, Brazil participated in the study. BMRm values were measured by an indirect calorimeter and predicted by different equations (Schofield, Henry and Rees, Mifflin-St. Jeor and Anjos. All subjects had their body composition and anthropometric variables also measured. Accuracy of the estimations was established by the percentage of BMRe falling within ±10% of BMRm and bias when the 95% CI of the difference of BMRe and BMRm means did not include zero. Mean BMRm values were 4833.5 (SD 583.3) and 6278.8 (SD 724.0) kJ*day -1 for women and men, respectively. BMRe values were both biased and inaccurate except for values predicted by the Anjos equation. BMR overestimation was approximately 20% for the Schofield equation which was higher comparatively to the Henry and Rees (14.5% and 9.6% for women and men, respectively) and the Mifflin-St. Jeor (approximately 14.0%) equations. BMR estimated by the Anjos equation was unbiased (95% CI = -78.1; 96.3 kJ day -1 for women and -282.6; 30.7 kJ*day -1 for men). Population-specific BMR predictive equations yield unbiased and accurate BMR values in adults from an urban tropical setting. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  11. A comparative study of diffraction of shallow-water waves by high-level IGN and GN equations

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, B.B. [College of Shipbuilding Engineering, Harbin Engineering University, 150001 Harbin (China); Ertekin, R.C. [Department of Ocean and Resources Engineering, University of Hawai' i, Honolulu, HI 96822 (United States); College of Shipbuilding Engineering, Harbin Engineering University, 150001 Harbin (China); Duan, W.Y., E-mail: duanwenyangheu@hotmail.com [College of Shipbuilding Engineering, Harbin Engineering University, 150001 Harbin (China)

    2015-02-15

    This work is on the nonlinear diffraction analysis of shallow-water waves, impinging on submerged obstacles, by two related theories, namely the classical Green–Naghdi (GN) equations and the Irrotational Green–Naghdi (IGN) equations, both sets of equations being at high levels and derived for incompressible and inviscid flows. Recently, the high-level Green–Naghdi equations have been applied to some wave transformation problems. The high-level IGN equations have also been used in the last decade to study certain wave propagation problems. However, past works on these theories used different numerical methods to solve these nonlinear and unsteady sets of differential equations and at different levels. Moreover, different physical problems have been solved in the past. Therefore, it has not been possible to understand the differences produced by these two sets of theories and their range of applicability so far. We are thus motivated to make a direct comparison of the results produced by these theories by use of the same numerical method to solve physically the same wave diffraction problems. We focus on comparing these two theories by using similar codes; only the equations used are different but other parts of the codes, such as the wave-maker, damping zone, discretion method, matrix solver, etc., are exactly the same. This way, we eliminate many potential sources of differences that could be produced by the solution of different equations. The physical problems include the presence of various submerged obstacles that can be used for example as breakwaters or to represent the continental shelf. A numerical wave tank is created by placing a wavemaker on one end and a wave absorbing beach on the other. The nonlinear and unsteady sets of differential equations are solved by the finite-difference method. The results are compared with different equations as well as with the available experimental data.

  12. An algorithm for computing the hull of the solution set of interval linear equations

    Czech Academy of Sciences Publication Activity Database

    Rohn, Jiří

    2011-01-01

    Roč. 435, č. 2 (2011), s. 193-201 ISSN 0024-3795 R&D Projects: GA ČR GA201/09/1957; GA ČR GC201/08/J020 Institutional research plan: CEZ:AV0Z10300504 Keywords : interval linear equations * solution set * interval hull * algorithm * absolute value inequality Subject RIV: BA - General Mathematics Impact factor: 0.974, year: 2011

  13. A level-set method for two-phase flows with soluble surfactant

    Science.gov (United States)

    Xu, Jian-Jun; Shi, Weidong; Lai, Ming-Chih

    2018-01-01

    A level-set method is presented for solving two-phase flows with soluble surfactant. The Navier-Stokes equations are solved along with the bulk surfactant and the interfacial surfactant equations. In particular, the convection-diffusion equation for the bulk surfactant on the irregular moving domain is solved by using a level-set based diffusive-domain method. A conservation law for the total surfactant mass is derived, and a re-scaling procedure for the surfactant concentrations is proposed to compensate for the surfactant mass loss due to numerical diffusion. The whole numerical algorithm is easy for implementation. Several numerical simulations in 2D and 3D show the effects of surfactant solubility on drop dynamics under shear flow.

  14. A parametric level-set method for partially discrete tomography

    NARCIS (Netherlands)

    A. Kadu (Ajinkya); T. van Leeuwen (Tristan); K.J. Batenburg (Joost)

    2017-01-01

    textabstractThis paper introduces a parametric level-set method for tomographic reconstruction of partially discrete images. Such images consist of a continuously varying background and an anomaly with a constant (known) grey-value. We express the geometry of the anomaly using a level-set function,

  15. Identifying Heterogeneities in Subsurface Environment using the Level Set Method

    Energy Technology Data Exchange (ETDEWEB)

    Lei, Hongzhuan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lu, Zhiming [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vesselinov, Velimir Valentinov [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-25

    These are slides from a presentation on identifying heterogeneities in subsurface environment using the level set method. The slides start with the motivation, then explain Level Set Method (LSM), the algorithms, some examples are given, and finally future work is explained.

  16. A new level set model for multimaterial flows

    Energy Technology Data Exchange (ETDEWEB)

    Starinshak, David P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Karni, Smadar [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of Mathematics; Roe, Philip L. [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of AerospaceEngineering

    2014-01-08

    We present a new level set model for representing multimaterial flows in multiple space dimensions. Instead of associating a level set function with a specific fluid material, the function is associated with a pair of materials and the interface that separates them. A voting algorithm collects sign information from all level sets and determines material designations. M(M ₋1)/2 level set functions might be needed to represent a general M-material configuration; problems of practical interest use far fewer functions, since not all pairs of materials share an interface. The new model is less prone to producing indeterminate material states, i.e. regions claimed by more than one material (overlaps) or no material at all (vacuums). It outperforms existing material-based level set models without the need for reinitialization schemes, thereby avoiding additional computational costs and preventing excessive numerical diffusion.

  17. Compact invariant sets of the static spherically symmetric Einstein-Yang-Mills equations

    Energy Technology Data Exchange (ETDEWEB)

    Starkov, Konstantin E., E-mail: konst@citedi.m [CITEDI-IPN, Av. del Parque 1310, Mesa de Otay, Tijuana, BC (Mexico)

    2010-04-05

    In this Letter we obtain results concerning compact invariant sets of the static spherically symmetric Einstein-Yang-Mills (EYM) equations with help of studies of its localization. Let a be a cosmological constant and s be another parameter entering into these equations which is used for considering the physical time as a temporal variable, with s=1, while s=-1 is used for considering the physical time as a spatial variable. We show that in case s=1; a<0 the location of any compact invariant set is described by some system of linear inequalities. Then we prove that in case s=1; a>0 the set of all compact invariant sets consists of two equilibrium points only. Further, we state that in cases s=-1; a<0 and s=-1; a>0 there are only two equilibrium points and there are no periodic orbits. In addition, we prove that in the last two cases there are neither homoclinic orbits nor heteroclinic orbits as well.

  18. Novel gene sets improve set-level classification of prokaryotic gene expression data.

    Science.gov (United States)

    Holec, Matěj; Kuželka, Ondřej; Železný, Filip

    2015-10-28

    Set-level classification of gene expression data has received significant attention recently. In this setting, high-dimensional vectors of features corresponding to genes are converted into lower-dimensional vectors of features corresponding to biologically interpretable gene sets. The dimensionality reduction brings the promise of a decreased risk of overfitting, potentially resulting in improved accuracy of the learned classifiers. However, recent empirical research has not confirmed this expectation. Here we hypothesize that the reported unfavorable classification results in the set-level framework were due to the adoption of unsuitable gene sets defined typically on the basis of the Gene ontology and the KEGG database of metabolic networks. We explore an alternative approach to defining gene sets, based on regulatory interactions, which we expect to collect genes with more correlated expression. We hypothesize that such more correlated gene sets will enable to learn more accurate classifiers. We define two families of gene sets using information on regulatory interactions, and evaluate them on phenotype-classification tasks using public prokaryotic gene expression data sets. From each of the two gene-set families, we first select the best-performing subtype. The two selected subtypes are then evaluated on independent (testing) data sets against state-of-the-art gene sets and against the conventional gene-level approach. The novel gene sets are indeed more correlated than the conventional ones, and lead to significantly more accurate classifiers. The novel gene sets are indeed more correlated than the conventional ones, and lead to significantly more accurate classifiers. Novel gene sets defined on the basis of regulatory interactions improve set-level classification of gene expression data. The experimental scripts and other material needed to reproduce the experiments are available at http://ida.felk.cvut.cz/novelgenesets.tar.gz.

  19. EXTRA: a digital computer program for the solution of stiff sets of ordinary initial value, first order differential equations

    International Nuclear Information System (INIS)

    Sidell, J.

    1976-08-01

    EXTRA is a program written for the Winfrith KDF9 enabling the user to solve first order initial value differential equations. In this report general numerical integration methods are discussed with emphasis on their application to the solution of stiff sets of equations. A method of particular applicability to stiff sets of equations is described. This method is incorporated in the program EXTRA and full instructions for its use are given. A comparison with other methods of computation is included. (author)

  20. Matched pairs approach to set theoretic solutions of the Yang-Baxter equation

    International Nuclear Information System (INIS)

    Gateva-Ivanova, T.; Majid, S.

    2005-08-01

    We study set-theoretic solutions (X,r) of the Yang-Baxter equations on a set X in terms of the induced left and right actions of X on itself. We give a characterization of involutive square-free solutions in terms of cyclicity conditions. We characterise general solutions in terms of an induced matched pair of unital semigroups S(X,r) and construct (S,r S ) from the matched pair. Finally, we study extensions of solutions in terms of matched pairs of their associated semigroups. We also prove several general results about matched pairs of unital semigroups of the required type, including iterated products S bowtie S bowtie S underlying the proof that r S is a solution, and extensions (S bowtie T, r Sb owtie T ). Examples include a general 'double' construction (S bowtie S,r Sb owtie S ) and some concrete extensions, their actions and graphs based on small sets. (author)

  1. Volume Sculpting Using the Level-Set Method

    DEFF Research Database (Denmark)

    Bærentzen, Jakob Andreas; Christensen, Niels Jørgen

    2002-01-01

    In this paper, we propose the use of the Level--Set Method as the underlying technology of a volume sculpting system. The main motivation is that this leads to a very generic technique for deformation of volumetric solids. In addition, our method preserves a distance field volume representation....... A scaling window is used to adapt the Level--Set Method to local deformations and to allow the user to control the intensity of the tool. Level--Set based tools have been implemented in an interactive sculpting system, and we show sculptures created using the system....

  2. The Dirac Equation in the algebraic approximation. VII. A comparison of molecular finite difference and finite basis set calculations using distributed Gaussian basis sets

    NARCIS (Netherlands)

    Quiney, H. M.; Glushkov, V. N.; Wilson, S.; Sabin,; Brandas, E

    2001-01-01

    A comparison is made of the accuracy achieved in finite difference and finite basis set approximations to the Dirac equation for the ground state of the hydrogen molecular ion. The finite basis set calculations are carried out using a distributed basis set of Gaussian functions the exponents and

  3. Comparison of different methods for the solution of sets of linear equations

    International Nuclear Information System (INIS)

    Bilfinger, T.; Schmidt, F.

    1978-06-01

    The application of the conjugate-gradient methods as novel general iterative methods for the solution of sets of linear equations with symmetrical systems matrices led to this paper, where a comparison of these methods with the conventional differently accelerated Gauss-Seidel iteration was carried out. In additon, the direct Cholesky method was also included in the comparison. The studies referred mainly to memory requirement, computing time, speed of convergence, and accuracy of different conditions of the systems matrices, by which also the sensibility of the methods with respect to the influence of truncation errors may be recognized. (orig.) 891 RW [de

  4. A level set method for multiple sclerosis lesion segmentation.

    Science.gov (United States)

    Zhao, Yue; Guo, Shuxu; Luo, Min; Shi, Xue; Bilello, Michel; Zhang, Shaoxiang; Li, Chunming

    2018-06-01

    In this paper, we present a level set method for multiple sclerosis (MS) lesion segmentation from FLAIR images in the presence of intensity inhomogeneities. We use a three-phase level set formulation of segmentation and bias field estimation to segment MS lesions and normal tissue region (including GM and WM) and CSF and the background from FLAIR images. To save computational load, we derive a two-phase formulation from the original multi-phase level set formulation to segment the MS lesions and normal tissue regions. The derived method inherits the desirable ability to precisely locate object boundaries of the original level set method, which simultaneously performs segmentation and estimation of the bias field to deal with intensity inhomogeneity. Experimental results demonstrate the advantages of our method over other state-of-the-art methods in terms of segmentation accuracy. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Some numerical studies of interface advection properties of level set ...

    Indian Academy of Sciences (India)

    explicit computational elements moving through an Eulerian grid. ... location. The interface is implicitly defined (captured) as the location of the discontinuity in the ... This level set function is advected with the background flow field and thus ...

  6. An accurate conservative level set/ghost fluid method for simulating turbulent atomization

    International Nuclear Information System (INIS)

    Desjardins, Olivier; Moureau, Vincent; Pitsch, Heinz

    2008-01-01

    This paper presents a novel methodology for simulating incompressible two-phase flows by combining an improved version of the conservative level set technique introduced in [E. Olsson, G. Kreiss, A conservative level set method for two phase flow, J. Comput. Phys. 210 (2005) 225-246] with a ghost fluid approach. By employing a hyperbolic tangent level set function that is transported and re-initialized using fully conservative numerical schemes, mass conservation issues that are known to affect level set methods are greatly reduced. In order to improve the accuracy of the conservative level set method, high order numerical schemes are used. The overall robustness of the numerical approach is increased by computing the interface normals from a signed distance function reconstructed from the hyperbolic tangent level set by a fast marching method. The convergence of the curvature calculation is ensured by using a least squares reconstruction. The ghost fluid technique provides a way of handling the interfacial forces and large density jumps associated with two-phase flows with good accuracy, while avoiding artificial spreading of the interface. Since the proposed approach relies on partial differential equations, its implementation is straightforward in all coordinate systems, and it benefits from high parallel efficiency. The robustness and efficiency of the approach is further improved by using implicit schemes for the interface transport and re-initialization equations, as well as for the momentum solver. The performance of the method is assessed through both classical level set transport tests and simple two-phase flow examples including topology changes. It is then applied to simulate turbulent atomization of a liquid Diesel jet at Re=3000. The conservation errors associated with the accurate conservative level set technique are shown to remain small even for this complex case

  7. An efficient, scalable, and adaptable framework for solving generic systems of level-set PDEs

    Directory of Open Access Journals (Sweden)

    Kishore R. Mosaliganti

    2013-12-01

    Full Text Available In the last decade, level-set methods have been actively developed for applications in image registration, segmentation, tracking, and reconstruction. However, the development of a wide variety of level-set PDEs and their numerical discretization schemes, coupled with hybrid combinations of PDE terms, stopping criteria, and reinitialization strategies, has created a software logistics problem. In the absence of an integrative design, current toolkits support only specific types of level-set implementations which restrict future algorithm development since extensions require significant code duplication and effort. In the new NIH/NLM Insight Toolkit (ITK v4 architecture, we implemented a level-set software design that is flexible to different numerical (continuous, discrete, and sparse and grid representations (point, mesh, and image-based. Given that a generic PDE is a summation of different terms, we used a set of linked containers to which level-set terms can be added or deleted at any point in the evolution process. This container-based approach allows the user to explore and customize terms in the level-set equation at compile-time in a flexible manner. The framework is optimized so that repeated computations of common intensity functions (e.g. gradient and Hessians across multiple terms is eliminated. The framework further enables the evolution of multiple level-sets for multi-object segmentation and processing of large datasets. For doing so, we restrict level-set domains to subsets of the image domain and use multithreading strategies to process groups of subdomains or level-set functions. Users can also select from a variety of reinitialization policies and stopping criteria. Finally, we developed a visualization framework that shows the evolution of a level-set in real-time to help guide algorithm development and parameter optimization. We demonstrate the power of our new framework using confocal microscopy images of cells in a

  8. Field theoretical construction of an infinite set of quantum commuting operators related with soliton equations

    International Nuclear Information System (INIS)

    Sasaki, Ryu; Yamanaka, Itaru

    1987-01-01

    The quantum version of an infinite set of polynomial conserved quantities of a class of soliton equations is discussed from the point of view of naive continuum field theory. By using techniques of two dimensional field theories, we show that an infinite set of quantum commuting operators can be constructed explicitly from the knowledge of its classical counterparts. The quantum operators are so constructed as to coincide with the classical ones in the ℎ → 0 limit (ℎ; Planck's constant divided by 2π). It is expected that the explicit forms of these operators would shed some light on the structure of the infinite dimensional Lie algebras which underlie a certain class of quantum integrable systems. (orig.)

  9. Field theoretical construction of an infinite set of quantum commuting operators related with soliton equations

    International Nuclear Information System (INIS)

    Sasaki, Ryu; Yamanaka, Itaru.

    1986-08-01

    The quantum version of an infinite set of polynomial conserved quantities of a class of soliton equations is discussed from the point of view of naive continuum field theory. By using techniques of two dimensional field theories, we show that an infinite set of quantum commuting operators can be constructed explicitly from the knowledge of its classical counterparts. The quantum operators are so constructed as to coincide with the classical ones in the ℎ → 0 limit (ℎ; Planck's constant divided by 2π). It is expected that the explicit forms of these operators would shed some light on the structure of the infinite dimensional Lie algebras which underlie certain class of quantum integrable systems. (author)

  10. A level set approach for shock-induced α-γ phase transition of RDX

    Science.gov (United States)

    Josyula, Kartik; Rahul; De, Suvranu

    2018-02-01

    We present a thermodynamically consistent level sets approach based on regularization energy functional which can be directly incorporated into a Galerkin finite element framework to model interface motion. The regularization energy leads to a diffusive form of flux that is embedded within the level sets evolution equation which maintains the signed distance property of the level set function. The scheme is shown to compare well with the velocity extension method in capturing the interface position. The proposed level sets approach is employed to study the α-γphase transformation in RDX single crystal shocked along the (100) plane. Example problems in one and three dimensions are presented. We observe smooth evolution of the phase interface along the shock direction in both models. There is no diffusion of the interface during the zero level set evolution in the three dimensional model. The level sets approach is shown to capture the characteristics of the shock-induced α-γ phase transformation such as stress relaxation behind the phase interface and the finite time required for the phase transformation to complete. The regularization energy based level sets approach is efficient, robust, and easy to implement.

  11. On multiple level-set regularization methods for inverse problems

    International Nuclear Information System (INIS)

    DeCezaro, A; Leitão, A; Tai, X-C

    2009-01-01

    We analyze a multiple level-set method for solving inverse problems with piecewise constant solutions. This method corresponds to an iterated Tikhonov method for a particular Tikhonov functional G α based on TV–H 1 penalization. We define generalized minimizers for our Tikhonov functional and establish an existence result. Moreover, we prove convergence and stability results of the proposed Tikhonov method. A multiple level-set algorithm is derived from the first-order optimality conditions for the Tikhonov functional G α , similarly as the iterated Tikhonov method. The proposed multiple level-set method is tested on an inverse potential problem. Numerical experiments show that the method is able to recover multiple objects as well as multiple contrast levels

  12. Local Fractional Variational Iteration and Decomposition Methods for Wave Equation on Cantor Sets within Local Fractional Operators

    Directory of Open Access Journals (Sweden)

    Dumitru Baleanu

    2014-01-01

    Full Text Available We perform a comparison between the fractional iteration and decomposition methods applied to the wave equation on Cantor set. The operators are taken in the local sense. The results illustrate the significant features of the two methods which are both very effective and straightforward for solving the differential equations with local fractional derivative.

  13. Level-Set Topology Optimization with Aeroelastic Constraints

    Science.gov (United States)

    Dunning, Peter D.; Stanford, Bret K.; Kim, H. Alicia

    2015-01-01

    Level-set topology optimization is used to design a wing considering skin buckling under static aeroelastic trim loading, as well as dynamic aeroelastic stability (flutter). The level-set function is defined over the entire 3D volume of a transport aircraft wing box. Therefore, the approach is not limited by any predefined structure and can explore novel configurations. The Sequential Linear Programming (SLP) level-set method is used to solve the constrained optimization problems. The proposed method is demonstrated using three problems with mass, linear buckling and flutter objective and/or constraints. A constraint aggregation method is used to handle multiple buckling constraints in the wing skins. A continuous flutter constraint formulation is used to handle difficulties arising from discontinuities in the design space caused by a switching of the critical flutter mode.

  14. Level Set Structure of an Integrable Cellular Automaton

    Directory of Open Access Journals (Sweden)

    Taichiro Takagi

    2010-03-01

    Full Text Available Based on a group theoretical setting a sort of discrete dynamical system is constructed and applied to a combinatorial dynamical system defined on the set of certain Bethe ansatz related objects known as the rigged configurations. This system is then used to study a one-dimensional periodic cellular automaton related to discrete Toda lattice. It is shown for the first time that the level set of this cellular automaton is decomposed into connected components and every such component is a torus.

  15. Laplace transform series expansion method for solving the local fractional heat-transfer equation defined on Cantor sets

    Directory of Open Access Journals (Sweden)

    Sun Huan

    2016-01-01

    Full Text Available In this paper, we use the Laplace transform series expansion method to find the analytical solution for the local fractional heat-transfer equation defined on Cantor sets via local fractional calculus.

  16. The approximate inverse in action: IV. Semi-discrete equations in a Banach space setting

    International Nuclear Information System (INIS)

    Schuster, T; Schöpfer, F; Rieder, A

    2012-01-01

    This article concerns the method of approximate inverse to solve semi-discrete, linear operator equations in Banach spaces. Semi-discrete means that we search for a solution in an infinite-dimensional Banach space having only a finite number of data available. In this sense the situation is applicable to a large variety of applications where a measurement process delivers a discretization of an infinite-dimensional data space. The method of approximate inverse computes scalar products of the data with pre-computed reconstruction kernels which are associated with mollifiers and the dual of the model operator. The convergence, approximation power and regularization property of this method when applied to semi-discrete operator equations in Hilbert spaces has been investigated in three prequels to this paper. Here we extend these results to a Banach space setting. We prove convergence and stability for general Banach spaces and reproduce the results specifically for the integration operator acting on the space of continuous functions. (paper)

  17. Some free boundary problems in potential flow regime usinga based level set method

    Energy Technology Data Exchange (ETDEWEB)

    Garzon, M.; Bobillo-Ares, N.; Sethian, J.A.

    2008-12-09

    Recent advances in the field of fluid mechanics with moving fronts are linked to the use of Level Set Methods, a versatile mathematical technique to follow free boundaries which undergo topological changes. A challenging class of problems in this context are those related to the solution of a partial differential equation posed on a moving domain, in which the boundary condition for the PDE solver has to be obtained from a partial differential equation defined on the front. This is the case of potential flow models with moving boundaries. Moreover the fluid front will possibly be carrying some material substance which will diffuse in the front and be advected by the front velocity, as for example the use of surfactants to lower surface tension. We present a Level Set based methodology to embed this partial differential equations defined on the front in a complete Eulerian framework, fully avoiding the tracking of fluid particles and its known limitations. To show the advantages of this approach in the field of Fluid Mechanics we present in this work one particular application: the numerical approximation of a potential flow model to simulate the evolution and breaking of a solitary wave propagating over a slopping bottom and compare the level set based algorithm with previous front tracking models.

  18. NEWLIN: A digital computer program for the linearisation of sets of algebraic and first order differential equations

    International Nuclear Information System (INIS)

    Hopkinson, A.

    1969-05-01

    The techniques normally used for linearisation of equations are not amenable to general treatment by digital computation. This report describes a computer program for linearising sets of equations by numerical evaluations of partial derivatives. The program is written so that the specification of the non-linear equations is the same as for the digital simulation program, FIFI, and the linearised equations can be punched out in form suitable for input to the frequency response program FRP2 and the poles and zeros program ZIP. Full instructions for the use of the program are given and a sample problem input and output are shown. (author)

  19. High Frequency Acoustic Propagation using Level Set Methods

    Science.gov (United States)

    2007-01-01

    solution of the high frequency approximation to the wave equation. Traditional solutions to the Eikonal equation in high frequency acoustics are...the Eikonal equation derived from the high frequency approximation to the wave equation, ucuH ∇±=∇ )(),( xx , with the nonnegative function c(x...For simplicity, we only consider the case ucuH ∇+=∇ )(),( xx . Two difficulties must be addressed when solving the Eikonal equation in a fixed

  20. A deep level set method for image segmentation

    OpenAIRE

    Tang, Min; Valipour, Sepehr; Zhang, Zichen Vincent; Cobzas, Dana; MartinJagersand

    2017-01-01

    This paper proposes a novel image segmentation approachthat integrates fully convolutional networks (FCNs) with a level setmodel. Compared with a FCN, the integrated method can incorporatesmoothing and prior information to achieve an accurate segmentation.Furthermore, different than using the level set model as a post-processingtool, we integrate it into the training phase to fine-tune the FCN. Thisallows the use of unlabeled data during training in a semi-supervisedsetting. Using two types o...

  1. Level Sets and Voronoi based Feature Extraction from any Imagery

    DEFF Research Database (Denmark)

    Sharma, O.; Anton, François; Mioc, Darka

    2012-01-01

    Polygon features are of interest in many GEOProcessing applications like shoreline mapping, boundary delineation, change detection, etc. This paper presents a unique new GPU-based methodology to automate feature extraction combining level sets, or mean shift based segmentation together with Voron...

  2. Level set methods for inverse scattering—some recent developments

    International Nuclear Information System (INIS)

    Dorn, Oliver; Lesselier, Dominique

    2009-01-01

    We give an update on recent techniques which use a level set representation of shapes for solving inverse scattering problems, completing in that matter the exposition made in (Dorn and Lesselier 2006 Inverse Problems 22 R67) and (Dorn and Lesselier 2007 Deformable Models (New York: Springer) pp 61–90), and bringing it closer to the current state of the art

  3. Structural level set inversion for microwave breast screening

    International Nuclear Information System (INIS)

    Irishina, Natalia; Álvarez, Diego; Dorn, Oliver; Moscoso, Miguel

    2010-01-01

    We present a new inversion strategy for the early detection of breast cancer from microwave data which is based on a new multiphase level set technique. This novel structural inversion method uses a modification of the color level set technique adapted to the specific situation of structural breast imaging taking into account the high complexity of the breast tissue. We only use data of a few microwave frequencies for detecting the tumors hidden in this complex structure. Three level set functions are employed for describing four different types of breast tissue, where each of these four regions is allowed to have a complicated topology and to have an interior structure which needs to be estimated from the data simultaneously with the region interfaces. The algorithm consists of several stages of increasing complexity. In each stage more details about the anatomical structure of the breast interior is incorporated into the inversion model. The synthetic breast models which are used for creating simulated data are based on real MRI images of the breast and are therefore quite realistic. Our results demonstrate the potential and feasibility of the proposed level set technique for detecting, locating and characterizing a small tumor in its early stage of development embedded in such a realistic breast model. Both the data acquisition simulation and the inversion are carried out in 2D

  4. Level-Set Methodology on Adaptive Octree Grids

    Science.gov (United States)

    Gibou, Frederic; Guittet, Arthur; Mirzadeh, Mohammad; Theillard, Maxime

    2017-11-01

    Numerical simulations of interfacial problems in fluids require a methodology capable of tracking surfaces that can undergo changes in topology and capable to imposing jump boundary conditions in a sharp manner. In this talk, we will discuss recent advances in the level-set framework, in particular one that is based on adaptive grids.

  5. A Memory and Computation Efficient Sparse Level-Set Method

    NARCIS (Netherlands)

    Laan, Wladimir J. van der; Jalba, Andrei C.; Roerdink, Jos B.T.M.

    Since its introduction, the level set method has become the favorite technique for capturing and tracking moving interfaces, and found applications in a wide variety of scientific fields. In this paper we present efficient data structures and algorithms for tracking dynamic interfaces through the

  6. Integrodifference equations in patchy landscapes : II: population level consequences.

    Science.gov (United States)

    Musgrave, Jeffrey; Lutscher, Frithjof

    2014-09-01

    We analyze integrodifference equations (IDEs) in patchy landscapes. Movement is described by a dispersal kernel that arises from a random walk model with patch dependent diffusion, settling, and mortality rates, and it incorporates individual behavior at an interface between two patch types. Growth follows a simple Beverton-Holt growth or linear decay. We obtain explicit formulae for the critical domain-size problem, and we illustrate how different individual behavior at the boundary between two patch types affects this quantity. We also study persistence conditions on an infinite, periodic, patchy landscape. We observe that if the population can persist on the landscape, the spatial profile of the invasion evolves into a discontinuous traveling periodic wave that moves with constant speed. Assuming linear determinacy, we calculate the dispersion relation and illustrate how movement behavior affects invasion speed. Numerical simulations justify our approach by showing a close correspondence between the spread rate obtained from the dispersion relation and from numerical simulations.

  7. Discretisation Schemes for Level Sets of Planar Gaussian Fields

    Science.gov (United States)

    Beliaev, D.; Muirhead, S.

    2018-01-01

    Smooth random Gaussian functions play an important role in mathematical physics, a main example being the random plane wave model conjectured by Berry to give a universal description of high-energy eigenfunctions of the Laplacian on generic compact manifolds. Our work is motivated by questions about the geometry of such random functions, in particular relating to the structure of their nodal and level sets. We study four discretisation schemes that extract information about level sets of planar Gaussian fields. Each scheme recovers information up to a different level of precision, and each requires a maximum mesh-size in order to be valid with high probability. The first two schemes are generalisations and enhancements of similar schemes that have appeared in the literature (Beffara and Gayet in Publ Math IHES, 2017. https://doi.org/10.1007/s10240-017-0093-0; Mischaikow and Wanner in Ann Appl Probab 17:980-1018, 2007); these give complete topological information about the level sets on either a local or global scale. As an application, we improve the results in Beffara and Gayet (2017) on Russo-Seymour-Welsh estimates for the nodal set of positively-correlated planar Gaussian fields. The third and fourth schemes are, to the best of our knowledge, completely new. The third scheme is specific to the nodal set of the random plane wave, and provides global topological information about the nodal set up to `visible ambiguities'. The fourth scheme gives a way to approximate the mean number of excursion domains of planar Gaussian fields.

  8. A one-dimensional analysis of real and complex turbulence and the Maxwell set for the stochastic Burgers equation

    International Nuclear Information System (INIS)

    Neate, A D; Truman, A

    2005-01-01

    The inviscid limit of the Burgers equation, with body forces white noise in time, is discussed in terms of the level surfaces of the minimizing Hamilton-Jacobi function and the classical mechanical caustic and their algebraic pre-images under the classical mechanical flow map. The problem is analysed in terms of a reduced (one-dimensional) action function using a circle of ideas due to Arnol'd, Cayley and Klein. We characterize those parts of the caustic which are singular, and give an explicit expression for the cusp density on caustics and level surfaces. By considering the double points of level surfaces we find an explicit formula for the Maxwell set in the two-dimensional polynomial case, and we extend this to higher dimensions using a double discriminant of the reduced action, solving a long-standing problem for Hamiltonian dynamical systems. When the pre-level surface touches the pre-caustic, the geometry (number of cusps) on the level surface changes infinitely rapidly causing 'real turbulence'. Using an idea of Klein, it is shown that the geometry (number of swallowtails) on the caustic also changes infinitely rapidly when the real part of the pre-caustic touches its complex counterpart, causing 'complex turbulence'. These are both inherently stochastic in nature, and we determine their intermittence in terms of the recurrent behaviour of two processes

  9. Level sets and extrema of random processes and fields

    CERN Document Server

    Azais, Jean-Marc

    2009-01-01

    A timely and comprehensive treatment of random field theory with applications across diverse areas of study Level Sets and Extrema of Random Processes and Fields discusses how to understand the properties of the level sets of paths as well as how to compute the probability distribution of its extremal values, which are two general classes of problems that arise in the study of random processes and fields and in related applications. This book provides a unified and accessible approach to these two topics and their relationship to classical theory and Gaussian processes and fields, and the most modern research findings are also discussed. The authors begin with an introduction to the basic concepts of stochastic processes, including a modern review of Gaussian fields and their classical inequalities. Subsequent chapters are devoted to Rice formulas, regularity properties, and recent results on the tails of the distribution of the maximum. Finally, applications of random fields to various areas of mathematics a...

  10. Skull defect reconstruction based on a new hybrid level set.

    Science.gov (United States)

    Zhang, Ziqun; Zhang, Ran; Song, Zhijian

    2014-01-01

    Skull defect reconstruction is an important aspect of surgical repair. Historically, a skull defect prosthesis was created by the mirroring technique, surface fitting, or formed templates. These methods are not based on the anatomy of the individual patient's skull, and therefore, the prosthesis cannot precisely correct the defect. This study presented a new hybrid level set model, taking into account both the global optimization region information and the local accuracy edge information, while avoiding re-initialization during the evolution of the level set function. Based on the new method, a skull defect was reconstructed, and the skull prosthesis was produced by rapid prototyping technology. This resulted in a skull defect prosthesis that well matched the skull defect with excellent individual adaptation.

  11. A new level set model for cell image segmentation

    Science.gov (United States)

    Ma, Jing-Feng; Hou, Kai; Bao, Shang-Lian; Chen, Chun

    2011-02-01

    In this paper we first determine three phases of cell images: background, cytoplasm and nucleolus according to the general physical characteristics of cell images, and then develop a variational model, based on these characteristics, to segment nucleolus and cytoplasm from their relatively complicated backgrounds. In the meantime, the preprocessing obtained information of cell images using the OTSU algorithm is used to initialize the level set function in the model, which can speed up the segmentation and present satisfactory results in cell image processing.

  12. ABOUT SOME APPROXIMATIONS TO THE CLOSED SET OF NOT TRIVIAL SOLUTIONS OF THE EQUATIONS OF GINZBURG - LANDAU

    Directory of Open Access Journals (Sweden)

    A. A. Fonarev

    2014-01-01

    Full Text Available Possibility of use of a projective iterative method for search of approximations to the closed set of not trivial generalised solutions of a boundary value problem for Ginzburg - Landau's equations of the phenomenological theory of superconduction is investigated. The projective iterative method combines a projective method and iterative process. The generalised solutions of a boundary value problem for Ginzburg - Landau's equations are critical points of a functional of a superconductor free energy.

  13. Reevaluation of steam generator level trip set point

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Yoon Sub; Soh, Dong Sub; Kim, Sung Oh; Jung, Se Won; Sung, Kang Sik; Lee, Joon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-06-01

    The reactor trip by the low level of steam generator water accounts for a substantial portion of reactor scrams in a nuclear plant and the feasibility of modification of the steam generator water level trip system of YGN 1/2 was evaluated in this study. The study revealed removal of the reactor trip function from the SG water level trip system is not possible because of plant safety but relaxation of the trip set point by 9 % is feasible. The set point relaxation requires drilling of new holes for level measurement to operating steam generators. Characteristics of negative neutron flux rate trip and reactor trip were also reviewed as an additional work. Since the purpose of the trip system modification for reduction of a reactor scram frequency is not to satisfy legal requirements but to improve plant performance and the modification yields positive and negative aspects, the decision of actual modification needs to be made based on the results of this study and also the policy of a plant owner. 37 figs, 6 tabs, 14 refs. (Author).

  14. Tokamak m = 1 magnetohydrodynamic calculations in toroidal geometry using a full set of nonlinear resistive magnetohydrodynamic equations

    International Nuclear Information System (INIS)

    Charlton, L.A.; Carreras, B.A.; Holmes, J.A.; Lynch, V.E.

    1988-01-01

    The linear stability and nonlinear evolution of the resistive m = 1 mode in tokamaks is studied using a full set of resistive magnetohydrodynamic (MHD) equations in toroidal geometry. The modification of the linear and nonlinear properties of the mode by a combination of strong toroidal effects and low resistivity is the focus of this work. Linearly there is a transition from resistive kink to resistive tearing behavior as the aspect ratio and resistivity are reduced, and there is a corresponding modification of the nonlinear behavior, including a slowing of the island growth and development of a Rutherford regime, as the tearing regime is approached. In order to study the sensitivity of the stability and evolution to assumptions concerning the equation of state, two sets of full nonlinear resistive MHD equations (a pressure convection set and an incompressible set) are used. Both sets give more stable nonlinear behavior as the aspect ratio is reduced. The pressure convection set shows a transition from a Kadomtsev reconnection at large aspect ratio to a saturation at small aspect ratio. The incompressible set yields Kadomtsev reconnection for all aspect ratios, but with a significant lengthening of the reconnection time and development of a Rutherford regime at an aspect ratio approaching the transition from a resistive kink mode to a tearing mode. The pressure convection set gives an incomplete reconnection similar to that sometimes seen experimentally. The pressure convection set is, however, strictly justified only at high beta

  15. Level set method for image segmentation based on moment competition

    Science.gov (United States)

    Min, Hai; Wang, Xiao-Feng; Huang, De-Shuang; Jin, Jing; Wang, Hong-Zhi; Li, Hai

    2015-05-01

    We propose a level set method for image segmentation which introduces the moment competition and weakly supervised information into the energy functional construction. Different from the region-based level set methods which use force competition, the moment competition is adopted to drive the contour evolution. Here, a so-called three-point labeling scheme is proposed to manually label three independent points (weakly supervised information) on the image. Then the intensity differences between the three points and the unlabeled pixels are used to construct the force arms for each image pixel. The corresponding force is generated from the global statistical information of a region-based method and weighted by the force arm. As a result, the moment can be constructed and incorporated into the energy functional to drive the evolving contour to approach the object boundary. In our method, the force arm can take full advantage of the three-point labeling scheme to constrain the moment competition. Additionally, the global statistical information and weakly supervised information are successfully integrated, which makes the proposed method more robust than traditional methods for initial contour placement and parameter setting. Experimental results with performance analysis also show the superiority of the proposed method on segmenting different types of complicated images, such as noisy images, three-phase images, images with intensity inhomogeneity, and texture images.

  16. Evolution in time of an N-atom system. I. A physical basis set for the projection of the master equation

    International Nuclear Information System (INIS)

    Freedhoff, Helen

    2004-01-01

    We study an aggregate of N identical two-level atoms (TLA's) coupled by the retarded interatomic interaction, using the Lehmberg-Agarwal master equation. First, we calculate the entangled eigenstates of the system; then, we use these eigenstates as a basis set for the projection of the master equation. We demonstrate that in this basis the equations of motion for the level populations, as well as the expressions for the emission and absorption spectra, assume a simple mathematical structure and allow for a transparent physical interpretation. To illustrate the use of the general theory in emission processes, we study an isosceles triangle of atoms, and present in the long wavelength limit the (cascade) emission spectrum for a hexagon of atoms fully excited at t=0. To illustrate its use for absorption processes, we tabulate (in the same limit) the biexciton absorption frequencies, linewidths, and relative intensities for polygons consisting of N=2,...,9 TLA's

  17. A new level set model for cell image segmentation

    International Nuclear Information System (INIS)

    Ma Jing-Feng; Chen Chun; Hou Kai; Bao Shang-Lian

    2011-01-01

    In this paper we first determine three phases of cell images: background, cytoplasm and nucleolus according to the general physical characteristics of cell images, and then develop a variational model, based on these characteristics, to segment nucleolus and cytoplasm from their relatively complicated backgrounds. In the meantime, the preprocessing obtained information of cell images using the OTSU algorithm is used to initialize the level set function in the model, which can speed up the segmentation and present satisfactory results in cell image processing. (cross-disciplinary physics and related areas of science and technology)

  18. Development of a set of equations for incorporating disk flexibility effects in rotordynamical analyses

    Science.gov (United States)

    Flowers, George T.; Ryan, Stephen G.

    1991-01-01

    Rotordynamical equations that account for disk flexibility are developed. These equations employ free-free rotor modes to model the rotor system. Only transverse vibrations of the disks are considered, with the shaft/disk system considered to be torsionally rigid. Second order elastic foreshortening effects that couple with the rotor speed to produce first order terms in the equations of motion are included. The approach developed in this study is readily adaptable for usage in many of the codes that are current used in rotordynamical simulations. The equations are similar to those used in standard rigid disk analyses but with additional terms that include the effects of disk flexibility. An example case is presented to demonstrate the use of the equations and to show the influence of disk flexibility on the rotordynamical behavior of a sample system.

  19. Level Set Projection Method for Incompressible Navier-Stokes on Arbitrary Boundaries

    KAUST Repository

    Williams-Rioux, Bertrand

    2012-01-12

    Second order level set projection method for incompressible Navier-Stokes equations is proposed to solve flow around arbitrary geometries. We used rectilinear grid with collocated cell centered velocity and pressure. An explicit Godunov procedure is used to address the nonlinear advection terms, and an implicit Crank-Nicholson method to update viscous effects. An approximate pressure projection is implemented at the end of the time stepping using multigrid as a conventional fast iterative method. The level set method developed by Osher and Sethian [17] is implemented to address real momentum and pressure boundary conditions by the advection of a distance function, as proposed by Aslam [3]. Numerical results for the Strouhal number and drag coefficients validated the model with good accuracy for flow over a cylinder in the parallel shedding regime (47 < Re < 180). Simulations for an array of cylinders and an oscillating cylinder were performed, with the latter demonstrating our methods ability to handle dynamic boundary conditions.

  20. Embedded Real-Time Architecture for Level-Set-Based Active Contours

    Directory of Open Access Journals (Sweden)

    Dejnožková Eva

    2005-01-01

    Full Text Available Methods described by partial differential equations have gained a considerable interest because of undoubtful advantages such as an easy mathematical description of the underlying physics phenomena, subpixel precision, isotropy, or direct extension to higher dimensions. Though their implementation within the level set framework offers other interesting advantages, their vast industrial deployment on embedded systems is slowed down by their considerable computational effort. This paper exploits the high parallelization potential of the operators from the level set framework and proposes a scalable, asynchronous, multiprocessor platform suitable for system-on-chip solutions. We concentrate on obtaining real-time execution capabilities. The performance is evaluated on a continuous watershed and an object-tracking application based on a simple gradient-based attraction force driving the active countour. The proposed architecture can be realized on commercially available FPGAs. It is built around general-purpose processor cores, and can run code developed with usual tools.

  1. Two Surface-Tension Formulations For The Level Set Interface-Tracking Method

    International Nuclear Information System (INIS)

    Shepel, S.V.; Smith, B.L.

    2005-01-01

    The paper describes a comparative study of two surface-tension models for the Level Set interface tracking method. In both models, the surface tension is represented as a body force, concentrated near the interface, but the technical implementation of the two options is different. The first is based on a traditional Level Set approach, in which the surface tension is distributed over a narrow band around the interface using a smoothed Delta function. In the second model, which is based on the integral form of the fluid-flow equations, the force is imposed only in those computational cells through which the interface passes. Both models have been incorporated into the Finite-Element/Finite-Volume Level Set method, previously implemented into the commercial Computational Fluid Dynamics (CFD) code CFX-4. A critical evaluation of the two models, undertaken in the context of four standard Level Set benchmark problems, shows that the first model, based on the smoothed Delta function approach, is the more general, and more robust, of the two. (author)

  2. Stochastic level-set variational implicit-solvent approach to solute-solvent interfacial fluctuations

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shenggao, E-mail: sgzhou@suda.edu.cn, E-mail: bli@math.ucsd.edu [Department of Mathematics and Mathematical Center for Interdiscipline Research, Soochow University, 1 Shizi Street, Jiangsu, Suzhou 215006 (China); Sun, Hui; Cheng, Li-Tien [Department of Mathematics, University of California, San Diego, La Jolla, California 92093-0112 (United States); Dzubiella, Joachim [Soft Matter and Functional Materials, Helmholtz-Zentrum Berlin, 14109 Berlin, Germany and Institut für Physik, Humboldt-Universität zu Berlin, 12489 Berlin (Germany); Li, Bo, E-mail: sgzhou@suda.edu.cn, E-mail: bli@math.ucsd.edu [Department of Mathematics and Quantitative Biology Graduate Program, University of California, San Diego, La Jolla, California 92093-0112 (United States); McCammon, J. Andrew [Department of Chemistry and Biochemistry, Department of Pharmacology, Howard Hughes Medical Institute, University of California, San Diego, La Jolla, California 92093-0365 (United States)

    2016-08-07

    Recent years have seen the initial success of a variational implicit-solvent model (VISM), implemented with a robust level-set method, in capturing efficiently different hydration states and providing quantitatively good estimation of solvation free energies of biomolecules. The level-set minimization of the VISM solvation free-energy functional of all possible solute-solvent interfaces or dielectric boundaries predicts an equilibrium biomolecular conformation that is often close to an initial guess. In this work, we develop a theory in the form of Langevin geometrical flow to incorporate solute-solvent interfacial fluctuations into the VISM. Such fluctuations are crucial to biomolecular conformational changes and binding process. We also develop a stochastic level-set method to numerically implement such a theory. We describe the interfacial fluctuation through the “normal velocity” that is the solute-solvent interfacial force, derive the corresponding stochastic level-set equation in the sense of Stratonovich so that the surface representation is independent of the choice of implicit function, and develop numerical techniques for solving such an equation and processing the numerical data. We apply our computational method to study the dewetting transition in the system of two hydrophobic plates and a hydrophobic cavity of a synthetic host molecule cucurbit[7]uril. Numerical simulations demonstrate that our approach can describe an underlying system jumping out of a local minimum of the free-energy functional and can capture dewetting transitions of hydrophobic systems. In the case of two hydrophobic plates, we find that the wavelength of interfacial fluctuations has a strong influence to the dewetting transition. In addition, we find that the estimated energy barrier of the dewetting transition scales quadratically with the inter-plate distance, agreeing well with existing studies of molecular dynamics simulations. Our work is a first step toward the

  3. Iterative methods for nonlinear set-valued operators of the monotone type with applications to operator equations

    International Nuclear Information System (INIS)

    Chidume, C.E.

    1989-06-01

    The fixed points of set-valued operators satisfying a condition of monotonicity type in real Banach spaces with uniformly convex dual spaces are approximated by recursive averaging processes. Applications to important classes of linear and nonlinear operator equations are also presented. (author). 33 refs

  4. Surface-to-surface registration using level sets

    DEFF Research Database (Denmark)

    Hansen, Mads Fogtmann; Erbou, Søren G.; Vester-Christensen, Martin

    2007-01-01

    This paper presents a general approach for surface-to-surface registration (S2SR) with the Euclidean metric using signed distance maps. In addition, the method is symmetric such that the registration of a shape A to a shape B is identical to the registration of the shape B to the shape A. The S2SR...... problem can be approximated by the image registration (IR) problem of the signed distance maps (SDMs) of the surfaces confined to some narrow band. By shrinking the narrow bands around the zero level sets the solution to the IR problem converges towards the S2SR problem. It is our hypothesis...... that this approach is more robust and less prone to fall into local minima than ordinary surface-to-surface registration. The IR problem is solved using the inverse compositional algorithm. In this paper, a set of 40 pelvic bones of Duroc pigs are registered to each other w.r.t. the Euclidean transformation...

  5. A generic validation methodology and its application to a set of multi-axial creep damage constitutive equations

    International Nuclear Information System (INIS)

    Xu Qiang

    2005-01-01

    A generic validation methodology for a set of multi-axial creep damage constitutive equations is proposed and its use is illustrated with 0.5Cr0.5Mo0.25V ferritic steel which is featured as brittle or intergranular rupture. The objective of this research is to develop a methodology to guide systematically assess the quality of a set of multi-axial creep damage constitutive equations in order to ensure its general applicability. This work adopted a total quality assurance approach and expanded as a Four Stages procedure (Theories and Fundamentals, Parameter Identification, Proportional Load, and Non-proportional load). Its use is illustrated with 0.5Cr0.5Mo0.25V ferritic steel and this material is chosen due to its industry importance, the popular use of KRH type of constitutive equations, and the available qualitative experimental data including damage distribution from notched bar test. The validation exercise clearly revealed the deficiencies existed in the KRH formulation (in terms of mathematics and physics of damage mechanics) and its incapability to predict creep deformation accurately. Consequently, its use should be warned, which is particularly important due to its wide use as indicated in literature. This work contributes to understand the rational for formulation and the quality assurance of a set of constitutive equations in creep damage mechanics as well as in general damage mechanics. (authors)

  6. On the fluid-dynamical approximation to the Boltzmann equation at the level of the Navier-Stokes equation

    International Nuclear Information System (INIS)

    Kawashima, S.; Matsumara, A.; Nishida, T.

    1979-01-01

    The compressible and heat-conductive Navier-Stokes equation obtained as the second approximation of the formal Chapman-Enskog expansion is investigated on its relations to the original nonlinear Boltzmann equation and also to the incompressible Navier-Stokes equation. The solutions of the Boltzmann equation and the incompressible Navier-Stokes equation for small initial data are proved to be asymptotically equivalent (mod decay rate tsup(-5/4)) as t → + infinitely to that of the compressible Navier-Stokes equation for the corresponding initial data. (orig.) 891 HJ/orig. 892 MKO

  7. The PLUS family: A set of computer programs to evaluate analytical solutions of the diffusion equation and thermoelasticity

    International Nuclear Information System (INIS)

    Montan, D.N.

    1987-02-01

    This report is intended to describe, document and provide instructions for the use of new versions of a set of computer programs commonly referred to as the PLUS family. These programs were originally designed to numerically evaluate simple analytical solutions of the diffusion equation. The new versions include linear thermo-elastic effects from thermal fields calculated by the diffusion equation. After the older versions of the PLUS family were documented a year ago, it was realized that the techniques employed in the programs were well suited to the addition of linear thermo-elastic phenomena. This has been implemented and this report describes the additions. 3 refs., 14 figs

  8. An Explicit Enclosure of the Solution Set of Overdetermined Interval Linear Equations

    Czech Academy of Sciences Publication Activity Database

    Rohn, Jiří

    2017-01-01

    Roč. 24, February (2017), s. 1-10 ISSN 1573-1340 Institutional support: RVO:67985807 Keywords : interval linear equations * interval hull * unit midpoint * enclosure Subject RIV: BA - General Mathematics OBOR OECD: Applied mathematics http://interval.louisiana.edu/ reliable -computing-journal/volume-24/ reliable -computing-24-pp-001-010.pdf

  9. Interrelation of alternative sets of Lax-pairs for a generalized nonlinear Schroedinger equation

    International Nuclear Information System (INIS)

    Iino, Kazuhiro; Ichikawa, Yoshihiko; Wadati, Miki.

    1982-05-01

    Examination of the inverse scattering transformation schemes for a generalized nonlinear Schroedinger equation reveals the fact that the algorithm of Chen-Lee-Liu gives rise to the Lax-pairs for the squared eigenfunctions of the Wadati-Konno-Ichikawa scheme, which has been formulated as superposition of the Ablowitz-Kaup-Newell-Segur scheme and the Kaup-Newell scheme. (author)

  10. Fluoroscopy in paediatric fractures - Setting a local diagnostic reference level

    International Nuclear Information System (INIS)

    Pillai, A.; McAuley, A.; McMurray, K.; Jain, M.

    2006-01-01

    Background: The ionizing radiations (Medical Exposure) Regulation 2000 has made it mandatory to establish diagnostic reference levels (DRLs) for all typical radiological examinations. Objectives: We attempt to provide dose data for some common fluoroscopic procedures used in orthopaedic trauma that may be used as the basis for setting DRLs for paediatric patients. Materials and methods: The dose area product (DAP) in 865 paediatric trauma examinations was analysed. Median DAP values and screening times for each procedure type along with quartile values for each range are presented. Results: In the upper limb, elbow examinations had maximum exposure with a median DAP value of 1.21 cGy cm 2 . Median DAP values for forearm and wrist examinations were 0.708 and 0.538 cGy cm 2 , respectively. In lower limb, tibia and fibula examinations had a median DAP value of 3.23 cGy cm 2 followed by ankle examinations with a median DAP of 3.10 cGy cm 2 . The rounded third quartile DAP value for each distribution can be used as a provisional DRL for the specific procedure type. (authors)

  11. Numerical simulation of interface movement in gas-liquid two-phase flows with Level Set method

    International Nuclear Information System (INIS)

    Li Huixiong; Chinese Academy of Sciences, Beijing; Deng Sheng; Chen Tingkuan; Zhao Jianfu; Wang Fei

    2005-01-01

    Numerical simulation of gas-liquid two-phase flow and heat transfer has been an attractive work for a quite long time, but still remains as a knotty difficulty due to the inherent complexities of the gas-liquid two-phase flow resulted from the existence of moving interfaces with topology changes. This paper reports the effort and the latest advances that have been made by the authors, with special emphasis on the methods for computing solutions to the advection equation of the Level set function, which is utilized to capture the moving interfaces in gas-liquid two-phase flows. Three different schemes, i.e. the simple finite difference scheme, the Superbee-TVD scheme and the 5-order WENO scheme in combination with the Runge-Kutta method are respectively applied to solve the advection equation of the Level Set. A numerical procedure based on the well-verified SIMPLER method is employed to numerically calculate the momentum equations of the two-phase flow. The above-mentioned three schemes are employed to simulate the movement of four typical interfaces under 5 typical flowing conditions. Analysis of the numerical results shows that the 5-order WENO scheme and the Superbee-TVD scheme are much better than the simple finite difference scheme, and the 5-order WENO scheme is the best to compute solutions to the advection equation of the Level Set. The 5-order WENO scheme will be employed as the main scheme to get solutions to the advection equations of the Level Set when gas-liquid two-phase flows are numerically studied in the future. (authors)

  12. Topology optimization of hyperelastic structures using a level set method

    Science.gov (United States)

    Chen, Feifei; Wang, Yiqiang; Wang, Michael Yu; Zhang, Y. F.

    2017-12-01

    Soft rubberlike materials, due to their inherent compliance, are finding widespread implementation in a variety of applications ranging from assistive wearable technologies to soft material robots. Structural design of such soft and rubbery materials necessitates the consideration of large nonlinear deformations and hyperelastic material models to accurately predict their mechanical behaviour. In this paper, we present an effective level set-based topology optimization method for the design of hyperelastic structures that undergo large deformations. The method incorporates both geometric and material nonlinearities where the strain and stress measures are defined within the total Lagrange framework and the hyperelasticity is characterized by the widely-adopted Mooney-Rivlin material model. A shape sensitivity analysis is carried out, in the strict sense of the material derivative, where the high-order terms involving the displacement gradient are retained to ensure the descent direction. As the design velocity enters into the shape derivative in terms of its gradient and divergence terms, we develop a discrete velocity selection strategy. The whole optimization implementation undergoes a two-step process, where the linear optimization is first performed and its optimized solution serves as the initial design for the subsequent nonlinear optimization. It turns out that this operation could efficiently alleviate the numerical instability and facilitate the optimization process. To demonstrate the validity and effectiveness of the proposed method, three compliance minimization problems are studied and their optimized solutions present significant mechanical benefits of incorporating the nonlinearities, in terms of remarkable enhancement in not only the structural stiffness but also the critical buckling load.

  13. Segmenting the Parotid Gland using Registration and Level Set Methods

    DEFF Research Database (Denmark)

    Hollensen, Christian; Hansen, Mads Fogtmann; Højgaard, Liselotte

    . The method was evaluated on a test set consisting of 8 corresponding data sets. The attained total volume Dice coefficient and mean Haussdorff distance were 0.61 ± 0.20 and 15.6 ± 7.4 mm respectively. The method has improvement potential which could be exploited in order for clinical introduction....

  14. Energy level broadening effect on the equation of state of hot dense Al and Au plasma

    International Nuclear Information System (INIS)

    Hou Yong; Jin Fengtao; Yuan Jianmin

    2007-01-01

    In the hot dense matter regime, the isothermal equation of state (EOS) of Al and Au is calculated using an average-atom (AA) model in which the broadening of energy levels of atoms and ions are accounted for by using with a Gaussian distribution of the density of states. The distribution of bound electrons in the energy bands is determined by the continuum Fermi-Dirac distribution. With a self-consistent field average atoms scheme, it is shown that the energy-level broadening has a significant effect on the isothermal equation of state (EOS) of Al and Au in the hot dense matter regime. The jumps in the equation of state (EOS) induced by pressure ionization of the one-electron orbital with the increase in density, which often occur in the normal average-atom model and have been avoided by generally introducing the pseudo-shape resonance states, disappear naturally

  15. Testing strong factorial invariance using three-level structural equation modeling

    Directory of Open Access Journals (Sweden)

    Suzanne eJak

    2014-07-01

    Full Text Available Within structural equation modeling, the most prevalent model to investigate measurement bias is the multigroup model. Equal factor loadings and intercepts across groups in a multigroup model represent strong factorial invariance (absence of measurement bias across groups. Although this approach is possible in principle, it is hardly practical when the number of groups is large or when the group size is relatively small. Jak, Oort and Dolan (2013 showed how strong factorial invariance across large numbers of groups can be tested in a multilevel structural equation modeling framework, by treating group as a random instead of a fixed variable. In the present study, this model is extended for use with three-level data. The proposed method is illustrated with an investigation of strong factorial invariance across 156 school classes and 50 schools in a Dutch dyscalculia test, using three-level structural equation modeling.

  16. Symmetry in an elliptic problem and the blow-up set of a quasilinear heat equation

    Energy Technology Data Exchange (ETDEWEB)

    Cortazar, C.; Elgueta, M. [Universidad Catolica, Santiago (Chile); Felmer, P. [Universidad de Chile, Santiago (Chile)

    1996-12-31

    We will consider in this paper a semilinear elliptic equation {triangle}u + f(u) = 0 in {Omega}, (1.5) where the function f is locally Lipschitz in (0,{infinity}) and continuous in (0,{infinity}). We study symmetry properties of nonnegative solutions of this equation in two different situations: first we assume {Omega} = IR{sup N}, and second we consider {Omega} {ne} IR{sup N} and we provide (1.5) with overdetermined boundary conditions. Next we describe our results in the first case, that is, when {Omega} = IR{sup N}. We will consider the following hypothesis on the nonlinear function f (F) f(0) {le} 0, f continuous in (0,+{infinity}), locally Lipschitz in (0,+{infinity}) and there exists {alpha} > 0 so that f is strictly decreasing in [0,{alpha}]. We note that the support of a solution of (1.5) is not known a priori and so we have in fact a free boundary involved. Our goal is to determine the shape of this support and the symmetry properties of the solution.

  17. Numerical Modelling of Three-Fluid Flow Using The Level-set Method

    Science.gov (United States)

    Li, Hongying; Lou, Jing; Shang, Zhi

    2014-11-01

    This work presents a numerical model for simulation of three-fluid flow involving two different moving interfaces. These interfaces are captured using the level-set method via two different level-set functions. A combined formulation with only one set of conservation equations for the whole physical domain, consisting of the three different immiscible fluids, is employed. Numerical solution is performed on a fixed mesh using the finite volume method. Surface tension effect is incorporated using the Continuum Surface Force model. Validation of the present model is made against available results for stratified flow and rising bubble in a container with a free surface. Applications of the present model are demonstrated by a variety of three-fluid flow systems including (1) three-fluid stratified flow, (2) two-fluid stratified flow carrying the third fluid in the form of drops and (3) simultaneous rising and settling of two drops in a stationary third fluid. The work is supported by a Thematic and Strategic Research from A*STAR, Singapore (Ref. #: 1021640075).

  18. Equation level matching: An extension of the method of matched asymptotic expansion for problems of wave propagation

    Science.gov (United States)

    Faria, Luiz; Rosales, Rodolfo

    2017-11-01

    We introduce an alternative to the method of matched asymptotic expansions. In the ``traditional'' implementation, approximate solutions, valid in different (but overlapping) regions are matched by using ``intermediate'' variables. Here we propose to match at the level of the equations involved, via a ``uniform expansion'' whose equations enfold those of the approximations to be matched. This has the advantage that one does not need to explicitly solve the asymptotic equations to do the matching, which can be quite impossible for some problems. In addition, it allows matching to proceed in certain wave situations where the traditional approach fails because the time behaviors differ (e.g., one of the expansions does not include dissipation). On the other hand, this approach does not provide the fairly explicit approximations resulting from standard matching. In fact, this is not even its aim, which to produce the ``simplest'' set of equations that capture the behavior. Ruben Rosales work was partially supported by NSF Grants DMS-1614043 and DMS-1719637.

  19. Adaptable Value-Set Analysis for Low-Level Code

    OpenAIRE

    Brauer, Jörg; Hansen, René Rydhof; Kowalewski, Stefan; Larsen, Kim G.; Olesen, Mads Chr.

    2012-01-01

    This paper presents a framework for binary code analysis that uses only SAT-based algorithms. Within the framework, incremental SAT solving is used to perform a form of weakly relational value-set analysis in a novel way, connecting the expressiveness of the value sets to computational complexity. Another key feature of our framework is that it translates the semantics of binary code into an intermediate representation. This allows for a straightforward translation of the program semantics in...

  20. Goal oriented Mathematics Survey at Preparatory Level- Revised set ...

    African Journals Online (AJOL)

    This cross sectional study design on mathematical syllabi at preparatory levels of the high schools was to investigate the efficiency of the subject at preparatory level education serving as a basis for several streams, like Natural science, Technology, Computer Science, Health Science and Agriculture found at tertiary levels.

  1. A combined single-multiphase flow formulation of the premixing phase using the level set method

    International Nuclear Information System (INIS)

    Leskovar, M.; Marn, J.

    1999-01-01

    The premixing phase of a steam explosion covers the interaction of the melt jet or droplets with the water prior to any steam explosion occurring. To get a better insight of the hydrodynamic processes during the premixing phase beside hot premixing experiments, where the water evaporation is significant, also cold isothermal premixing experiments are performed. The specialty of isothermal premixing experiments is that three phases are involved: the water, the air and the spheres phase, but only the spheres phase mixes with the other two phases whereas the water and air phases do not mix and remain separated by a free surface. Our idea therefore was to treat the isothermal premixing process with a combined single-multiphase flow model. In this combined model the water and air phase are treated as a single phase with discontinuous phase properties at the water air interface, whereas the spheres are treated as usually with a multiphase flow model, where the spheres represent the dispersed phase and the common water-air phase represents the continuous phase. The common water-air phase was described with the front capturing method based on the level set formulation. In the level set formulation, the boundary of two-fluid interfaces is modeled as the zero set of a smooth signed normal distance function defined on the entire physical domain. The boundary is then updated by solving a nonlinear equation of the Hamilton-Jacobi type on the whole domain. With this single-multiphase flow model the Queos isothermal premixing Q08 has been simulated. A numerical analysis using different treatments of the water-air interface (level set, high-resolution and upwind) has been performed for the incompressible and compressible case and the results were compared to experimental measurements.(author)

  2. Combinatorial Integer Labeling Thorems on Finite Sets with an Application to Discrete Systems of Nonlinear Equations

    NARCIS (Netherlands)

    van der Laan, G.; Talman, A.J.J.; Yang, Z.F.

    2007-01-01

    Tucker's well-known combinatorial lemma states that for any given symmetric triangulation of the n-dimensional unit cube and for any integer labeling that assigns to each vertex of the triangulation a label from the set f§1;§2; ¢ ¢ ¢ ;§ng with the property that antipodal vertices on the boundary of

  3. Numerical simulation of overflow at vertical weirs using a hybrid level set/VOF method

    Science.gov (United States)

    Lv, Xin; Zou, Qingping; Reeve, Dominic

    2011-10-01

    This paper presents the applications of a newly developed free surface flow model to the practical, while challenging overflow problems for weirs. Since the model takes advantage of the strengths of both the level set and volume of fluid methods and solves the Navier-Stokes equations on an unstructured mesh, it is capable of resolving the time evolution of very complex vortical motions, air entrainment and pressure variations due to violent deformations following overflow of the weir crest. In the present study, two different types of vertical weir, namely broad-crested and sharp-crested, are considered for validation purposes. The calculated overflow parameters such as pressure head distributions, velocity distributions, and water surface profiles are compared against experimental data as well as numerical results available in literature. A very good quantitative agreement has been obtained. The numerical model, thus, offers a good alternative to traditional experimental methods in the study of weir problems.

  4. Level set method for optimal shape design of MRAM core. Micromagnetic approach

    International Nuclear Information System (INIS)

    Melicher, Valdemar; Cimrak, Ivan; Keer, Roger van

    2008-01-01

    We aim at optimizing the shape of the magnetic core in MRAM memories. The evolution of the magnetization during the writing process is described by the Landau-Lifshitz equation (LLE). The actual shape of the core in one cell is characterized by the coefficient γ. Cost functional f=f(γ) expresses the quality of the writing process having in mind the competition between the full-select and the half-select element. We derive an explicit form of the derivative F=∂f/∂γ which allows for the use of gradient-type methods for the actual computation of the optimized shape (e.g., steepest descend method). The level set method (LSM) is employed for the representation of the piecewise constant coefficient γ

  5. On piecewise constant level-set (PCLS) methods for the identification of discontinuous parameters in ill-posed problems

    International Nuclear Information System (INIS)

    De Cezaro, A; Leitão, A; Tai, X-C

    2013-01-01

    We investigate level-set-type methods for solving ill-posed problems with discontinuous (piecewise constant) coefficients. The goal is to identify the level sets as well as the level values of an unknown parameter function on a model described by a nonlinear ill-posed operator equation. The PCLS approach is used here to parametrize the solution of a given operator equation in terms of a L 2 level-set function, i.e. the level-set function itself is assumed to be a piecewise constant function. Two distinct methods are proposed for computing stable solutions of the resulting ill-posed problem: the first is based on Tikhonov regularization, while the second is based on the augmented Lagrangian approach with total variation penalization. Classical regularization results (Engl H W et al 1996 Mathematics and its Applications (Dordrecht: Kluwer)) are derived for the Tikhonov method. On the other hand, for the augmented Lagrangian method, we succeed in proving the existence of (generalized) Lagrangian multipliers in the sense of (Rockafellar R T and Wets R J-B 1998 Grundlehren der Mathematischen Wissenschaften (Berlin: Springer)). Numerical experiments are performed for a 2D inverse potential problem (Hettlich F and Rundell W 1996 Inverse Problems 12 251–66), demonstrating the capabilities of both methods for solving this ill-posed problem in a stable way (complicated inclusions are recovered without any a priori geometrical information on the unknown parameter). (paper)

  6. HPC in Basin Modeling: Simulating Mechanical Compaction through Vertical Effective Stress using Level Sets

    Science.gov (United States)

    McGovern, S.; Kollet, S. J.; Buerger, C. M.; Schwede, R. L.; Podlaha, O. G.

    2017-12-01

    In the context of sedimentary basins, we present a model for the simulation of the movement of ageological formation (layers) during the evolution of the basin through sedimentation and compactionprocesses. Assuming a single phase saturated porous medium for the sedimentary layers, the modelfocuses on the tracking of the layer interfaces, through the use of the level set method, as sedimentationdrives fluid-flow and reduction of pore space by compaction. On the assumption of Terzaghi's effectivestress concept, the coupling of the pore fluid pressure to the motion of interfaces in 1-D is presented inMcGovern, et.al (2017) [1] .The current work extends the spatial domain to 3-D, though we maintain the assumption ofvertical effective stress to drive the compaction. The idealized geological evolution is conceptualized asthe motion of interfaces between rock layers, whose paths are determined by the magnitude of a speedfunction in the direction normal to the evolving layer interface. The speeds normal to the interface aredependent on the change in porosity, determined through an effective stress-based compaction law,such as the exponential Athy's law. Provided with the speeds normal to the interface, the level setmethod uses an advection equation to evolve a potential function, whose zero level set defines theinterface. Thus, the moving layer geometry influences the pore pressure distribution which couplesback to the interface speeds. The flexible construction of the speed function allows extension, in thefuture, to other terms to represent different physical processes, analogous to how the compaction rulerepresents material deformation.The 3-D model is implemented using the generic finite element method framework Deal II,which provides tools, building on p4est and interfacing to PETSc, for the massively parallel distributedsolution to the model equations [2]. Experiments are being run on the Juelich Supercomputing Center'sJureca cluster. [1] McGovern, et.al. (2017

  7. Topological Hausdorff dimension and level sets of generic continuous functions on fractals

    International Nuclear Information System (INIS)

    Balka, Richárd; Buczolich, Zoltán; Elekes, Márton

    2012-01-01

    Highlights: ► We examine a new fractal dimension, the so called topological Hausdorff dimension. ► The generic continuous function has a level set of maximal Hausdorff dimension. ► This maximal dimension is the topological Hausdorff dimension minus one. ► Homogeneity implies that “most” level sets are of this dimension. ► We calculate the various dimensions of the graph of the generic function. - Abstract: In an earlier paper we introduced a new concept of dimension for metric spaces, the so called topological Hausdorff dimension. For a compact metric space K let dim H K and dim tH K denote its Hausdorff and topological Hausdorff dimension, respectively. We proved that this new dimension describes the Hausdorff dimension of the level sets of the generic continuous function on K, namely sup{ dim H f -1 (y):y∈R} =dim tH K-1 for the generic f ∈ C(K), provided that K is not totally disconnected, otherwise every non-empty level set is a singleton. We also proved that if K is not totally disconnected and sufficiently homogeneous then dim H f −1 (y) = dim tH K − 1 for the generic f ∈ C(K) and the generic y ∈ f(K). The most important goal of this paper is to make these theorems more precise. As for the first result, we prove that the supremum is actually attained on the left hand side of the first equation above, and also show that there may only be a unique level set of maximal Hausdorff dimension. As for the second result, we characterize those compact metric spaces for which for the generic f ∈ C(K) and the generic y ∈ f(K) we have dim H f −1 (y) = dim tH K − 1. We also generalize a result of B. Kirchheim by showing that if K is self-similar then for the generic f ∈ C(K) for every y∈intf(K) we have dim H f −1 (y) = dim tH K − 1. Finally, we prove that the graph of the generic f ∈ C(K) has the same Hausdorff and topological Hausdorff dimension as K.

  8. Continuous evolution of equations and inclusions involving set-valued contraction mappings with applications to generalized fractal transforms

    Directory of Open Access Journals (Sweden)

    Herb Kunze

    2014-06-01

    Full Text Available Let T be a set-valued contraction mapping on a general Banach space $\\mathcal{B}$. In the first part of this paper we introduce the evolution inclusion $\\dot x + x \\in Tx$ and study the convergence of solutions to this inclusion toward fixed points of T. Two cases are examined: (i T has a fixed point $\\bar y \\in \\mathcal{B}$ in the usual sense, i.e., $\\bar y = T \\bar y$ and (ii T has a fixed point in the sense of inclusions, i.e., $\\bar y \\in T \\bar y$. In the second part we extend this analysis to the case of set-valued evolution equations taking the form $\\dot x + x = Tx$. We also provide some applications to generalized fractal transforms.

  9. Effective Hamiltonians, two level systems, and generalized Maxwell-Bloch equations

    International Nuclear Information System (INIS)

    Sczaniecki, L.

    1981-02-01

    A new method is proposed involving a canonical transformation leading to the non-secular part of time-independent perturbation calculus. The method is used to derive expressions for effective Shen-Walls Hamiltonians which, taken in the two-level approximation and on the inclusion of non-Hamiltonian terms into the dynamics of the system, lead to generalized Maxwell-Bloch equations. The rotating wave approximation is written anew within the framework of our formalism. (author)

  10. Comprehensive solutions to the Bloch equations and dynamical models for open two-level systems

    Science.gov (United States)

    Skinner, Thomas E.

    2018-01-01

    The Bloch equation and its variants constitute the fundamental dynamical model for arbitrary two-level systems. Many important processes, including those in more complicated systems, can be modeled and understood through the two-level approximation. It is therefore of widespread relevance, especially as it relates to understanding dissipative processes in current cutting-edge applications of quantum mechanics. Although the Bloch equation has been the subject of considerable analysis in the 70 years since its inception, there is still, perhaps surprisingly, significant work that can be done. This paper extends the scope of previous analyses. It provides a framework for more fully understanding the dynamics of dissipative two-level systems. A solution is derived that is compact, tractable, and completely general, in contrast to previous results. Any solution of the Bloch equation depends on three roots of a cubic polynomial that are crucial to the time dependence of the system. The roots are typically only sketched out qualitatively, with no indication of their dependence on the physical parameters of the problem. Degenerate roots, which modify the solutions, have been ignored altogether. Here the roots are obtained explicitly in terms of a single real-valued root that is expressed as a simple function of the system parameters. For the conventional Bloch equation, a simple graphical representation of this root is presented that makes evident the explicit time dependence of the system for each point in the parameter space. Several intuitive, visual models of system dynamics are developed. A Euclidean coordinate system is identified in which any generalized Bloch equation is separable, i.e., the sum of commuting rotation and relaxation operators. The time evolution in this frame is simply a rotation followed by relaxation at modified rates that play a role similar to the standard longitudinal and transverse rates. These rates are functions of the applied field, which

  11. Trusting Politicians and Institutions in a Multi-Level Setting

    DEFF Research Database (Denmark)

    Hansen, Sune Welling; Kjær, Ulrik

    Trust in government and in politicians is a very crucial prerequisite for democratic processes. This goes not only for the national level of government but also for the regional and local. We make use of a large scale survey among citizens in Denmark to evaluate trust in politicians at different...... formation processes can negatively influence trust in the mayor and the councilors. Reaching out for the local power by being disloyal to one’s own party or by breaking deals already made can sometimes secure the mayoralty but it comes with a prize: lower trust among the electorate....

  12. Analysis of factors affecting satisfaction level on problem based learning approach using structural equation modeling

    Science.gov (United States)

    Hussain, Nur Farahin Mee; Zahid, Zalina

    2014-12-01

    Nowadays, in the job market demand, graduates are expected not only to have higher performance in academic but they must also be excellent in soft skill. Problem-Based Learning (PBL) has a number of distinct advantages as a learning method as it can deliver graduates that will be highly prized by industry. This study attempts to determine the satisfaction level of engineering students on the PBL Approach and to evaluate their determinant factors. The Structural Equation Modeling (SEM) was used to investigate how the factors of Good Teaching Scale, Clear Goals, Student Assessment and Levels of Workload affected the student satisfaction towards PBL approach.

  13. A finite element/level set model of polyurethane foam expansion and polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Rekha R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Long, Kevin Nicholas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roberts, Christine Cardinal [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Celina, Mathias C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brunini, Victor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Soehnel, Melissa Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Noble, David R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tinsley, James [Honeywell Federal Manufacturing & Technologies, Kansas City, MO (United States); Mondy, Lisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-12-01

    Polyurethane foams are used widely for encapsulation and structural purposes because they are inexpensive, straightforward to process, amenable to a wide range of density variations (1 lb/ft3 - 50 lb/ft3), and able to fill complex molds quickly and effectively. Computational model of the filling and curing process are needed to reduce defects such as voids, out-of-specification density, density gradients, foam decomposition from high temperatures due to exotherms, and incomplete filling. This paper details the development of a computational fluid dynamics model of a moderate density PMDI structural foam, PMDI-10. PMDI is an isocyanate-based polyurethane foam, which is chemically blown with water. The polyol reacts with isocyanate to produces the polymer. PMDI- 10 is catalyzed giving it a short pot life: it foams and polymerizes to a solid within 5 minutes during normal processing. To achieve a higher density, the foam is over-packed to twice or more of its free rise density of 10 lb/ft3. The goal for modeling is to represent the expansion, filling of molds, and the polymerization of the foam. This will be used to reduce defects, optimize the mold design, troubleshoot the processed, and predict the final foam properties. A homogenized continuum model foaming and curing was developed based on reaction kinetics, documented in a recent paper; it uses a simplified mathematical formalism that decouples these two reactions. The chemo-rheology of PMDI is measured experimentally and fit to a generalized- Newtonian viscosity model that is dependent on the extent of cure, gas fraction, and temperature. The conservation equations, including the equations of motion, an energy balance, and three rate equations are solved via a stabilized finite element method. The equations are combined with a level set method to determine the location of the foam-gas interface as it evolves to fill the mold. Understanding the thermal history and loads on the foam due to exothermicity and oven

  14. High-level waste tank farm set point document

    International Nuclear Information System (INIS)

    Anthony, J.A. III.

    1995-01-01

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope

  15. High-level waste tank farm set point document

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, J.A. III

    1995-01-15

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.

  16. Solving the Sea-Level Equation in an Explicit Time Differencing Scheme

    Science.gov (United States)

    Klemann, V.; Hagedoorn, J. M.; Thomas, M.

    2016-12-01

    In preparation of coupling the solid-earth to an ice-sheet compartment in an earth-system model, the dependency of initial topography on the ice-sheet history and viscosity structure has to be analysed. In this study, we discuss this dependency and how it influences the reconstruction of former sea level during a glacial cycle. The modelling is based on the VILMA code in which the field equations are solved in the time domain applying an explicit time-differencing scheme. The sea-level equation is solved simultaneously in the same explicit scheme as the viscoleastic field equations (Hagedoorn et al., 2007). With the assumption of only small changes, we neglect the iterative solution at each time step as suggested by e.g. Kendall et al. (2005). Nevertheless, the prediction of the initial paleo topography in case of moving coastlines remains to be iterated by repeated integration of the whole load history. The sensitivity study sketched at the beginning is accordingly motivated by the question if the iteration of the paleo topography can be replaced by a predefined one. This study is part of the German paleoclimate modelling initiative PalMod. Lit:Hagedoorn JM, Wolf D, Martinec Z, 2007. An estimate of global mean sea-level rise inferred from tide-gauge measurements using glacial-isostatic models consistent with the relative sea-level record. Pure appl. Geophys. 164: 791-818, doi:10.1007/s00024-007-0186-7Kendall RA, Mitrovica JX, Milne GA, 2005. On post-glacial sea level - II. Numerical formulation and comparative reesults on spherically symmetric models. Geophys. J. Int., 161: 679-706, doi:10.1111/j.365-246.X.2005.02553.x

  17. Joint level-set and spatio-temporal motion detection for cell segmentation.

    Science.gov (United States)

    Boukari, Fatima; Makrogiannis, Sokratis

    2016-08-10

    Cell segmentation is a critical step for quantification and monitoring of cell cycle progression, cell migration, and growth control to investigate cellular immune response, embryonic development, tumorigenesis, and drug effects on live cells in time-lapse microscopy images. In this study, we propose a joint spatio-temporal diffusion and region-based level-set optimization approach for moving cell segmentation. Moving regions are initially detected in each set of three consecutive sequence images by numerically solving a system of coupled spatio-temporal partial differential equations. In order to standardize intensities of each frame, we apply a histogram transformation approach to match the pixel intensities of each processed frame with an intensity distribution model learned from all frames of the sequence during the training stage. After the spatio-temporal diffusion stage is completed, we compute the edge map by nonparametric density estimation using Parzen kernels. This process is followed by watershed-based segmentation and moving cell detection. We use this result as an initial level-set function to evolve the cell boundaries, refine the delineation, and optimize the final segmentation result. We applied this method to several datasets of fluorescence microscopy images with varying levels of difficulty with respect to cell density, resolution, contrast, and signal-to-noise ratio. We compared the results with those produced by Chan and Vese segmentation, a temporally linked level-set technique, and nonlinear diffusion-based segmentation. We validated all segmentation techniques against reference masks provided by the international Cell Tracking Challenge consortium. The proposed approach delineated cells with an average Dice similarity coefficient of 89 % over a variety of simulated and real fluorescent image sequences. It yielded average improvements of 11 % in segmentation accuracy compared to both strictly spatial and temporally linked Chan

  18. Mind-sets, low-level exposures, and research

    International Nuclear Information System (INIS)

    Sagan, L.A.

    1993-01-01

    Much of our environmental policy is based on the notion that carcinogenic agents are harmful at even minuscule doses. From where does this thinking come? What is the scientific evidence that supports such policy? Moreover, why is the public willing to buy into this? Or is it the other way around: Has the scientific community bought into a paradigm that has its origins in public imagery? Or, most likely, are there interactions between the two? It is essential that we find out whether or not there are risks associated with low-level exposures to radiation. The author can see three obvious areas where the future depends on better information: The increasing radiation exposures resulting from the use of medical diagnostic and therapeutic practices need to be properly evaluated for safety; Environmental policies, which direct enormous resources to the reduction of small radiation exposures, needs to be put on a firmer scientific basis; The future of nuclear energy, dependent as it is on public acceptance, may well rely upon a better understanding of low-dose effects. Nuclear energy could provide an important solution of global warming and other possible environmental hazards, but will probably not be implemented as long as fear of low-dose radiation persists. Although an established paradigm has great resilience, it cannot resist the onslaught of inconsistent scientific observations or of the social value system that supports it. Only new research will enable us to determine if a paradigm shift is in order here

  19. A variational approach to multi-phase motion of gas, liquid and solid based on the level set method

    Science.gov (United States)

    Yokoi, Kensuke

    2009-07-01

    We propose a simple and robust numerical algorithm to deal with multi-phase motion of gas, liquid and solid based on the level set method [S. Osher, J.A. Sethian, Front propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulation, J. Comput. Phys. 79 (1988) 12; M. Sussman, P. Smereka, S. Osher, A level set approach for capturing solution to incompressible two-phase flow, J. Comput. Phys. 114 (1994) 146; J.A. Sethian, Level Set Methods and Fast Marching Methods, Cambridge University Press, 1999; S. Osher, R. Fedkiw, Level Set Methods and Dynamics Implicit Surface, Applied Mathematical Sciences, vol. 153, Springer, 2003]. In Eulerian framework, to simulate interaction between a moving solid object and an interfacial flow, we need to define at least two functions (level set functions) to distinguish three materials. In such simulations, in general two functions overlap and/or disagree due to numerical errors such as numerical diffusion. In this paper, we resolved the problem using the idea of the active contour model [M. Kass, A. Witkin, D. Terzopoulos, Snakes: active contour models, International Journal of Computer Vision 1 (1988) 321; V. Caselles, R. Kimmel, G. Sapiro, Geodesic active contours, International Journal of Computer Vision 22 (1997) 61; G. Sapiro, Geometric Partial Differential Equations and Image Analysis, Cambridge University Press, 2001; R. Kimmel, Numerical Geometry of Images: Theory, Algorithms, and Applications, Springer-Verlag, 2003] introduced in the field of image processing.

  20. DIFFUSION - WRS system module number 7539 for solving a set of multigroup diffusion equations in one dimension

    International Nuclear Information System (INIS)

    Grimstone, M.J.

    1978-06-01

    The WRS Modular Programming System has been developed as a means by which programmes may be more efficiently constructed, maintained and modified. In this system a module is a self-contained unit typically composed of one or more Fortran routines, and a programme is constructed from a number of such modules. This report describes one WRS module, the function of which is to solve a set of multigroup diffusion equations for a system represented in one-dimensional plane, cylindrical or spherical geometry. The information given in this manual is of use both to the programmer wishing to incorporate the module in a programme, and to the user of such a programme. (author)

  1. Two-Level Iteration Penalty Methods for the Navier-Stokes Equations with Friction Boundary Conditions

    Directory of Open Access Journals (Sweden)

    Yuan Li

    2013-01-01

    Full Text Available This paper presents two-level iteration penalty finite element methods to approximate the solution of the Navier-Stokes equations with friction boundary conditions. The basic idea is to solve the Navier-Stokes type variational inequality problem on a coarse mesh with mesh size H in combining with solving a Stokes, Oseen, or linearized Navier-Stokes type variational inequality problem for Stokes, Oseen, or Newton iteration on a fine mesh with mesh size h. The error estimate obtained in this paper shows that if H, h, and ε can be chosen appropriately, then these two-level iteration penalty methods are of the same convergence orders as the usual one-level iteration penalty method.

  2. Multilevel structural equation models for assessing moderation within and across levels of analysis.

    Science.gov (United States)

    Preacher, Kristopher J; Zhang, Zhen; Zyphur, Michael J

    2016-06-01

    Social scientists are increasingly interested in multilevel hypotheses, data, and statistical models as well as moderation or interactions among predictors. The result is a focus on hypotheses and tests of multilevel moderation within and across levels of analysis. Unfortunately, existing approaches to multilevel moderation have a variety of shortcomings, including conflated effects across levels of analysis and bias due to using observed cluster averages instead of latent variables (i.e., "random intercepts") to represent higher-level constructs. To overcome these problems and elucidate the nature of multilevel moderation effects, we introduce a multilevel structural equation modeling (MSEM) logic that clarifies the nature of the problems with existing practices and remedies them with latent variable interactions. This remedy uses random coefficients and/or latent moderated structural equations (LMS) for unbiased tests of multilevel moderation. We describe our approach and provide an example using the publicly available High School and Beyond data with Mplus syntax in Appendix. Our MSEM method eliminates problems of conflated multilevel effects and reduces bias in parameter estimates while offering a coherent framework for conceptualizing and testing multilevel moderation effects. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  3. Four-level conservative finite-difference schemes for Boussinesq paradigm equation

    Science.gov (United States)

    Kolkovska, N.

    2013-10-01

    In this paper a two-parametric family of four level conservative finite difference schemes is constructed for the multidimensional Boussinesq paradigm equation. The schemes are explicit in the sense that no inner iterations are needed for evaluation of the numerical solution. The preservation of the discrete energy with this method is proved. The schemes have been numerically tested on one soliton propagation model and two solitons interaction model. The numerical experiments demonstrate that the proposed family of schemes has second order of convergence in space and time steps in the discrete maximal norm.

  4. Letter: Modeling reactive shock waves in heterogeneous solids at the continuum level with stochastic differential equations

    Science.gov (United States)

    Kittell, D. E.; Yarrington, C. D.; Lechman, J. B.; Baer, M. R.

    2018-05-01

    A new paradigm is introduced for modeling reactive shock waves in heterogeneous solids at the continuum level. Inspired by the probability density function methods from turbulent reactive flows, it is hypothesized that the unreacted material microstructures lead to a distribution of heat release rates from chemical reaction. Fluctuations in heat release, rather than velocity, are coupled to the reactive Euler equations which are then solved via the Riemann problem. A numerically efficient, one-dimensional hydrocode is used to demonstrate this new approach, and simulation results of a representative impact calculation (inert flyer into explosive target) are discussed.

  5. Factors Affecting Differential Equation Problem Solving Ability of Students at Pre-University Level: A Conceptual Model

    Science.gov (United States)

    Aisha, Bibi; Zamri, Sharifa NorulAkmar Syed; Abdallah, Nabeel; Abedalaziz, Mohammad; Ahmad, Mushtaq; Satti, Umbreen

    2017-01-01

    In this study, different factors affecting students' differential equations (DEs) solving abilities were explored at pre university level. To explore main factors affecting students' differential equations problem solving ability, articles for a 19-year period, from 1996 to 2015, were critically reviewed and analyzed. It was revealed that…

  6. An integrated extended Kalman filter–implicit level set algorithm for monitoring planar hydraulic fractures

    International Nuclear Information System (INIS)

    Peirce, A; Rochinha, F

    2012-01-01

    We describe a novel approach to the inversion of elasto-static tiltmeter measurements to monitor planar hydraulic fractures propagating within three-dimensional elastic media. The technique combines the extended Kalman filter (EKF), which predicts and updates state estimates using tiltmeter measurement time-series, with a novel implicit level set algorithm (ILSA), which solves the coupled elasto-hydrodynamic equations. The EKF and ILSA are integrated to produce an algorithm to locate the unknown fracture-free boundary. A scaling argument is used to derive a strategy to tune the algorithm parameters to enable measurement information to compensate for unmodeled dynamics. Synthetic tiltmeter data for three numerical experiments are generated by introducing significant changes to the fracture geometry by altering the confining geological stress field. Even though there is no confining stress field in the dynamic model used by the new EKF-ILSA scheme, it is able to use synthetic data to arrive at remarkably accurate predictions of the fracture widths and footprints. These experiments also explore the robustness of the algorithm to noise and to placement of tiltmeter arrays operating in the near-field and far-field regimes. In these experiments, the appropriate parameter choices and strategies to improve the robustness of the algorithm to significant measurement noise are explored. (paper)

  7. Modeling of Two-Phase Flow in Rough-Walled Fracture Using Level Set Method

    Directory of Open Access Journals (Sweden)

    Yunfeng Dai

    2017-01-01

    Full Text Available To describe accurately the flow characteristic of fracture scale displacements of immiscible fluids, an incompressible two-phase (crude oil and water flow model incorporating interfacial forces and nonzero contact angles is developed. The roughness of the two-dimensional synthetic rough-walled fractures is controlled with different fractal dimension parameters. Described by the Navier–Stokes equations, the moving interface between crude oil and water is tracked using level set method. The method accounts for differences in densities and viscosities of crude oil and water and includes the effect of interfacial force. The wettability of the rough fracture wall is taken into account by defining the contact angle and slip length. The curve of the invasion pressure-water volume fraction is generated by modeling two-phase flow during a sudden drainage. The volume fraction of water restricted in the rough-walled fracture is calculated by integrating the water volume and dividing by the total cavity volume of the fracture while the two-phase flow is quasistatic. The effect of invasion pressure of crude oil, roughness of fracture wall, and wettability of the wall on two-phase flow in rough-walled fracture is evaluated.

  8. An Accurate Fire-Spread Algorithm in the Weather Research and Forecasting Model Using the Level-Set Method

    Science.gov (United States)

    Muñoz-Esparza, Domingo; Kosović, Branko; Jiménez, Pedro A.; Coen, Janice L.

    2018-04-01

    The level-set method is typically used to track and propagate the fire perimeter in wildland fire models. Herein, a high-order level-set method using fifth-order WENO scheme for the discretization of spatial derivatives and third-order explicit Runge-Kutta temporal integration is implemented within the Weather Research and Forecasting model wildland fire physics package, WRF-Fire. The algorithm includes solution of an additional partial differential equation for level-set reinitialization. The accuracy of the fire-front shape and rate of spread in uncoupled simulations is systematically analyzed. It is demonstrated that the common implementation used by level-set-based wildfire models yields to rate-of-spread errors in the range 10-35% for typical grid sizes (Δ = 12.5-100 m) and considerably underestimates fire area. Moreover, the amplitude of fire-front gradients in the presence of explicitly resolved turbulence features is systematically underestimated. In contrast, the new WRF-Fire algorithm results in rate-of-spread errors that are lower than 1% and that become nearly grid independent. Also, the underestimation of fire area at the sharp transition between the fire front and the lateral flanks is found to be reduced by a factor of ≈7. A hybrid-order level-set method with locally reduced artificial viscosity is proposed, which substantially alleviates the computational cost associated with high-order discretizations while preserving accuracy. Simulations of the Last Chance wildfire demonstrate additional benefits of high-order accurate level-set algorithms when dealing with complex fuel heterogeneities, enabling propagation across narrow fuel gaps and more accurate fire backing over the lee side of no fuel clusters.

  9. EGSIEM combination service: combination of GRACE monthly K-band solutions on normal equation level

    Science.gov (United States)

    Meyer, Ulrich; Jean, Yoomin; Arnold, Daniel; Jäggi, Adrian

    2017-04-01

    The European Gravity Service for Improved Emergency Management (EGSIEM) project offers a scientific combination service, combining for the first time monthly GRACE gravity fields of different analysis centers (ACs) on normal equation (NEQ) level and thus taking all correlations between the gravity field coefficients and pre-eliminated orbit and instrument parameters correctly into account. Optimal weights for the individual NEQs are commonly derived by variance component estimation (VCE), as is the case for the products of the International VLBI Service (IVS) or the DTRF2008 reference frame realisation that are also derived by combination on NEQ-level. But variance factors are based on post-fit residuals and strongly depend on observation sampling and noise modeling, which both are very diverse in case of the individual EGSIEM ACs. These variance factors do not necessarily represent the true error levels of the estimated gravity field parameters that are still governed by analysis noise. We present a combination approach where weights are derived on solution level, thereby taking the analysis noise into account.

  10. A LEVEL SET BASED SHAPE OPTIMIZATION METHOD FOR AN ELLIPTIC OBSTACLE PROBLEM

    KAUST Repository

    Burger, Martin; Matevosyan, Norayr; Wolfram, Marie-Therese

    2011-01-01

    analysis of the level set method in terms of viscosity solutions. To our knowledge this is the first complete analysis of a level set method for a nonlocal shape optimization problem. Finally, we discuss the implementation of the methods and illustrate its

  11. A three operator split-step method covering a larger set of non-linear partial differential equations

    Science.gov (United States)

    Zia, Haider

    2017-06-01

    This paper describes an updated exponential Fourier based split-step method that can be applied to a greater class of partial differential equations than previous methods would allow. These equations arise in physics and engineering, a notable example being the generalized derivative non-linear Schrödinger equation that arises in non-linear optics with self-steepening terms. These differential equations feature terms that were previously inaccessible to model accurately with low computational resources. The new method maintains a 3rd order error even with these additional terms and models the equation in all three spatial dimensions and time. The class of non-linear differential equations that this method applies to is shown. The method is fully derived and implementation of the method in the split-step architecture is shown. This paper lays the mathematical ground work for an upcoming paper employing this method in white-light generation simulations in bulk material.

  12. Combining region- and network-level brain-behavior relationships in a structural equation model.

    Science.gov (United States)

    Bolt, Taylor; Prince, Emily B; Nomi, Jason S; Messinger, Daniel; Llabre, Maria M; Uddin, Lucina Q

    2018-01-15

    Brain-behavior associations in fMRI studies are typically restricted to a single level of analysis: either a circumscribed brain region-of-interest (ROI) or a larger network of brain regions. However, this common practice may not always account for the interdependencies among ROIs of the same network or potentially unique information at the ROI-level, respectively. To account for both sources of information, we combined measurement and structural components of structural equation modeling (SEM) approaches to empirically derive networks from ROI activity, and to assess the association of both individual ROIs and their respective whole-brain activation networks with task performance using three large task-fMRI datasets and two separate brain parcellation schemes. The results for working memory and relational tasks revealed that well-known ROI-performance associations are either non-significant or reversed when accounting for the ROI's common association with its corresponding network, and that the network as a whole is instead robustly associated with task performance. The results for the arithmetic task revealed that in certain cases, an ROI can be robustly associated with task performance, even when accounting for its associated network. The SEM framework described in this study provides researchers additional flexibility in testing brain-behavior relationships, as well as a principled way to combine ROI- and network-levels of analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Effect of a uniform magnetic field on dielectric two-phase bubbly flows using the level set method

    International Nuclear Information System (INIS)

    Ansari, M.R.; Hadidi, A.; Nimvari, M.E.

    2012-01-01

    In this study, the behavior of a single bubble in a dielectric viscous fluid under a uniform magnetic field has been simulated numerically using the Level Set method in two-phase bubbly flow. The two-phase bubbly flow was considered to be laminar and homogeneous. Deformation of the bubble was considered to be due to buoyancy and magnetic forces induced from the external applied magnetic field. A computer code was developed to solve the problem using the flow field, the interface of two phases, and the magnetic field. The Finite Volume method was applied using the SIMPLE algorithm to discretize the governing equations. Using this algorithm enables us to calculate the pressure parameter, which has been eliminated by previous researchers because of the complexity of the two-phase flow. The finite difference method was used to solve the magnetic field equation. The results outlined in the present study agree well with the existing experimental data and numerical results. These results show that the magnetic field affects and controls the shape, size, velocity, and location of the bubble. - Highlights: ►A bubble behavior was simulated numerically. ► A single bubble behavior was considered in a dielectric viscous fluid. ► A uniform magnetic field is used to study a bubble behavior. ► Deformation of the bubble was considered using the Level Set method. ► The magnetic field affects the shape, size, velocity, and location of the bubble.

  14. New formulae for solutions of quantum Knizhnik-Zamolodchikov equations on level-4

    International Nuclear Information System (INIS)

    Boos, Hermann; Korepin, Vladimir; Smirnov, Feodor

    2004-01-01

    We present a new form of solution to the quantum Knizhnik-Zamolodchikov equation [qKZ] on level-4 in a special case corresponding to the Heisenberg XXX spin chain. Our form is equivalent to the integral representation obtained by Jimbo and Miwa in 1996 [7]. An advantage of our form is that it is reduced to the product of single integrals. This fact is deeply related to a cohomological nature of our formulae. Our approach is also based on the deformation of hyper-elliptic integrals and their main property-deformed Riemann bilinear relation. Jimbo and Miwa also suggested a nice conjecture which relates solution of the qKZ on level-4 to any correlation function of the XXX model. This conjecture, together with our form of solution to the qKZ, makes it possible to prove a conjecture that any correlation function of the XXX model can be expressed in terms of the Riemann zeta-function at odd arguments and rational coefficients. This issue will be discussed in our next publication

  15. Two-level method for unsteady Navier-Stokes equations based on a new projection

    International Nuclear Information System (INIS)

    Hou Yanren; Li Kaitai

    2004-12-01

    A two-level algorithm for the two dimensional unsteady Navier-Stokes equations based on a new projection is proposed and investigated. The approximate solution is solved as a sum of a large eddy component and a small eddy component, which are in the sense of the new projection, constructed in this paper. These two terms advance in time explicitly. Actually, the new algorithm proposed here can be regarded as a sort of postprocessing algorithm for the standard Galerkin method (SGM). The large eddy part is solved by SGM in the usual L 2 -based large eddy subspace while the small eddy part (the correction part) is obtained in its complement subspace in the sense of the new projection. The stability analysis indicates the improvement of the stability comparing with SGM of the same scale, and the L 2 -error estimate shows that the scheme can improve the accuracy of SGM approximation for half order. We also propose a numerical implementation based on Lagrange multiplier for this two-level algorithm. (author)

  16. Hybrid approach for detection of dental caries based on the methods FCM and level sets

    Science.gov (United States)

    Chaabene, Marwa; Ben Ali, Ramzi; Ejbali, Ridha; Zaied, Mourad

    2017-03-01

    This paper presents a new technique for detection of dental caries that is a bacterial disease that destroys the tooth structure. In our approach, we have achieved a new segmentation method that combines the advantages of fuzzy C mean algorithm and level set method. The results obtained by the FCM algorithm will be used by Level sets algorithm to reduce the influence of the noise effect on the working of each of these algorithms, to facilitate level sets manipulation and to lead to more robust segmentation. The sensitivity and specificity confirm the effectiveness of proposed method for caries detection.

  17. Out-of-Core Computations of High-Resolution Level Sets by Means of Code Transformation

    DEFF Research Database (Denmark)

    Christensen, Brian Bunch; Nielsen, Michael Bang; Museth, Ken

    2012-01-01

    We propose a storage efficient, fast and parallelizable out-of-core framework for streaming computations of high resolution level sets. The fundamental techniques are skewing and tiling transformations of streamed level set computations which allow for the combination of interface propagation, re...... computations are now CPU bound and consequently the overall performance is unaffected by disk latency and bandwidth limitations. We demonstrate this with several benchmark tests that show sustained out-of-core throughputs close to that of in-core level set simulations....

  18. GPU accelerated edge-region based level set evolution constrained by 2D gray-scale histogram.

    Science.gov (United States)

    Balla-Arabé, Souleymane; Gao, Xinbo; Wang, Bin

    2013-07-01

    Due to its intrinsic nature which allows to easily handle complex shapes and topological changes, the level set method (LSM) has been widely used in image segmentation. Nevertheless, LSM is computationally expensive, which limits its applications in real-time systems. For this purpose, we propose a new level set algorithm, which uses simultaneously edge, region, and 2D histogram information in order to efficiently segment objects of interest in a given scene. The computational complexity of the proposed LSM is greatly reduced by using the highly parallelizable lattice Boltzmann method (LBM) with a body force to solve the level set equation (LSE). The body force is the link with image data and is defined from the proposed LSE. The proposed LSM is then implemented using an NVIDIA graphics processing units to fully take advantage of the LBM local nature. The new algorithm is effective, robust against noise, independent to the initial contour, fast, and highly parallelizable. The edge and region information enable to detect objects with and without edges, and the 2D histogram information enable the effectiveness of the method in a noisy environment. Experimental results on synthetic and real images demonstrate subjectively and objectively the performance of the proposed method.

  19. Balancing Chemical Equations: The Role of Developmental Level and Mental Capacity.

    Science.gov (United States)

    Niaz, Mansoor; Lawson, Anton E.

    1985-01-01

    Tested two hypotheses: (1) formal reasoning is required to balance simple one-step equations; and (2) formal reasoning plus sufficient mental capacity are required to balance many-step equations. Independent variables included intellectual development, mental capacity, and degree of field dependence/independence. With 25 subjects, significance was…

  20. Mediation in dyadic data at the level of the dyads: a Structural Equation Modeling approach.

    Science.gov (United States)

    Ledermann, Thomas; Macho, Siegfried

    2009-10-01

    An extended version of the Common Fate Model (CFM) is presented to estimate and test mediation in dyadic data. The model can be used for distinguishable dyad members (e.g., heterosexual couples) or indistinguishable dyad members (e.g., homosexual couples) if (a) the variables measure characteristics of the dyadic relationship or shared external influences that affect both partners; if (b) the causal associations between the variables should be analyzed at the dyadic level; and if (c) the measured variables are reliable indicators of the latent variables. To assess mediation using Structural Equation Modeling, a general three-step procedure is suggested. The first is a selection of a good fitting model, the second a test of the direct effects, and the third a test of the mediating effect by means of bootstrapping. The application of the model along with the procedure for assessing mediation is illustrated using data from 184 couples on marital problems, communication, and marital quality. Differences with the Actor-Partner Interdependence Model and the analysis of longitudinal mediation by using the CFM are discussed.

  1. Exact calculation of the time convolutionless master equation generator: Application to the nonequilibrium resonant level model

    Science.gov (United States)

    Kidon, Lyran; Wilner, Eli Y.; Rabani, Eran

    2015-12-01

    The generalized quantum master equation provides a powerful tool to describe the dynamics in quantum impurity models driven away from equilibrium. Two complementary approaches, one based on Nakajima-Zwanzig-Mori time-convolution (TC) and the other on the Tokuyama-Mori time-convolutionless (TCL) formulations provide a starting point to describe the time-evolution of the reduced density matrix. A key in both approaches is to obtain the so called "memory kernel" or "generator," going beyond second or fourth order perturbation techniques. While numerically converged techniques are available for the TC memory kernel, the canonical approach to obtain the TCL generator is based on inverting a super-operator in the full Hilbert space, which is difficult to perform and thus, nearly all applications of the TCL approach rely on a perturbative scheme of some sort. Here, the TCL generator is expressed using a reduced system propagator which can be obtained from system observables alone and requires the calculation of super-operators and their inverse in the reduced Hilbert space rather than the full one. This makes the formulation amenable to quantum impurity solvers or to diagrammatic techniques, such as the nonequilibrium Green's function. We implement the TCL approach for the resonant level model driven away from equilibrium and compare the time scales for the decay of the generator with that of the memory kernel in the TC approach. Furthermore, the effects of temperature, source-drain bias, and gate potential on the TCL/TC generators are discussed.

  2. Level set segmentation of medical images based on local region statistics and maximum a posteriori probability.

    Science.gov (United States)

    Cui, Wenchao; Wang, Yi; Lei, Tao; Fan, Yangyu; Feng, Yan

    2013-01-01

    This paper presents a variational level set method for simultaneous segmentation and bias field estimation of medical images with intensity inhomogeneity. In our model, the statistics of image intensities belonging to each different tissue in local regions are characterized by Gaussian distributions with different means and variances. According to maximum a posteriori probability (MAP) and Bayes' rule, we first derive a local objective function for image intensities in a neighborhood around each pixel. Then this local objective function is integrated with respect to the neighborhood center over the entire image domain to give a global criterion. In level set framework, this global criterion defines an energy in terms of the level set functions that represent a partition of the image domain and a bias field that accounts for the intensity inhomogeneity of the image. Therefore, image segmentation and bias field estimation are simultaneously achieved via a level set evolution process. Experimental results for synthetic and real images show desirable performances of our method.

  3. A LEVEL SET BASED SHAPE OPTIMIZATION METHOD FOR AN ELLIPTIC OBSTACLE PROBLEM

    KAUST Repository

    Burger, Martin

    2011-04-01

    In this paper, we construct a level set method for an elliptic obstacle problem, which can be reformulated as a shape optimization problem. We provide a detailed shape sensitivity analysis for this reformulation and a stability result for the shape Hessian at the optimal shape. Using the shape sensitivities, we construct a geometric gradient flow, which can be realized in the context of level set methods. We prove the convergence of the gradient flow to an optimal shape and provide a complete analysis of the level set method in terms of viscosity solutions. To our knowledge this is the first complete analysis of a level set method for a nonlocal shape optimization problem. Finally, we discuss the implementation of the methods and illustrate its behavior through several computational experiments. © 2011 World Scientific Publishing Company.

  4. Optimal level of continuous positive airway pressure: auto-adjusting titration versus titration with a predictive equation.

    Science.gov (United States)

    Choi, Ji Ho; Jun, Young Joon; Oh, Jeong In; Jung, Jong Yoon; Hwang, Gyu Ho; Kwon, Soon Young; Lee, Heung Man; Kim, Tae Hoon; Lee, Sang Hag; Lee, Seung Hoon

    2013-05-01

    The aims of the present study were twofold. We sought to compare two methods of titrating the level of continuous positive airway pressure (CPAP) - auto-adjusting titration and titration using a predictive equation - with full-night manual titration used as the benchmark. We also investigated the reliability of the two methods in patients with obstructive sleep apnea syndrome (OSAS). Twenty consecutive adult patients with OSAS who had successful, full-night manual and auto-adjusting CPAP titration participated in this study. The titration pressure level was calculated with a previously developed predictive equation based on body mass index and apnea-hypopnea index. The mean titration pressure levels obtained with the manual, auto-adjusting, and predictive equation methods were 9.0 +/- 3.6, 9.4 +/- 3.0, and 8.1 +/- 1.6 cm H2O,respectively. There was a significant difference in the concordance within the range of +/- 2 cm H2O (p = 0.019) between both the auto-adjusting titration and the titration using the predictive equation compared to the full-night manual titration. However, there was no significant difference in the concordance within the range of +/- 1 cm H2O (p > 0.999). When compared to full-night manual titration as the standard method, auto-adjusting titration appears to be more reliable than using a predictive equation for determining the optimal CPAP level in patients with OSAS.

  5. Evaluating healthcare priority setting at the meso level: A thematic review of empirical literature

    Science.gov (United States)

    Waithaka, Dennis; Tsofa, Benjamin; Barasa, Edwine

    2018-01-01

    Background: Decentralization of health systems has made sub-national/regional healthcare systems the backbone of healthcare delivery. These regions are tasked with the difficult responsibility of determining healthcare priorities and resource allocation amidst scarce resources. We aimed to review empirical literature that evaluated priority setting practice at the meso (sub-national) level of health systems. Methods: We systematically searched PubMed, ScienceDirect and Google scholar databases and supplemented these with manual searching for relevant studies, based on the reference list of selected papers. We only included empirical studies that described and evaluated, or those that only evaluated priority setting practice at the meso-level. A total of 16 papers were identified from LMICs and HICs. We analyzed data from the selected papers by thematic review. Results: Few studies used systematic priority setting processes, and all but one were from HICs. Both formal and informal criteria are used in priority-setting, however, informal criteria appear to be more perverse in LMICs compared to HICs. The priority setting process at the meso-level is a top-down approach with minimal involvement of the community. Accountability for reasonableness was the most common evaluative framework as it was used in 12 of the 16 studies. Efficiency, reallocation of resources and options for service delivery redesign were the most common outcome measures used to evaluate priority setting. Limitations: Our study was limited by the fact that there are very few empirical studies that have evaluated priority setting at the meso-level and there is likelihood that we did not capture all the studies. Conclusions: Improving priority setting practices at the meso level is crucial to strengthening health systems. This can be achieved through incorporating and adapting systematic priority setting processes and frameworks to the context where used, and making considerations of both process

  6. Mapping topographic structure in white matter pathways with level set trees.

    Directory of Open Access Journals (Sweden)

    Brian P Kent

    Full Text Available Fiber tractography on diffusion imaging data offers rich potential for describing white matter pathways in the human brain, but characterizing the spatial organization in these large and complex data sets remains a challenge. We show that level set trees--which provide a concise representation of the hierarchical mode structure of probability density functions--offer a statistically-principled framework for visualizing and analyzing topography in fiber streamlines. Using diffusion spectrum imaging data collected on neurologically healthy controls (N = 30, we mapped white matter pathways from the cortex into the striatum using a deterministic tractography algorithm that estimates fiber bundles as dimensionless streamlines. Level set trees were used for interactive exploration of patterns in the endpoint distributions of the mapped fiber pathways and an efficient segmentation of the pathways that had empirical accuracy comparable to standard nonparametric clustering techniques. We show that level set trees can also be generalized to model pseudo-density functions in order to analyze a broader array of data types, including entire fiber streamlines. Finally, resampling methods show the reliability of the level set tree as a descriptive measure of topographic structure, illustrating its potential as a statistical descriptor in brain imaging analysis. These results highlight the broad applicability of level set trees for visualizing and analyzing high-dimensional data like fiber tractography output.

  7. Setting Healthcare Priorities at the Macro and Meso Levels: A Framework for Evaluation.

    Science.gov (United States)

    Barasa, Edwine W; Molyneux, Sassy; English, Mike; Cleary, Susan

    2015-09-16

    Priority setting in healthcare is a key determinant of health system performance. However, there is no widely accepted priority setting evaluation framework. We reviewed literature with the aim of developing and proposing a framework for the evaluation of macro and meso level healthcare priority setting practices. We systematically searched Econlit, PubMed, CINAHL, and EBSCOhost databases and supplemented this with searches in Google Scholar, relevant websites and reference lists of relevant papers. A total of 31 papers on evaluation of priority setting were identified. These were supplemented by broader theoretical literature related to evaluation of priority setting. A conceptual review of selected papers was undertaken. Based on a synthesis of the selected literature, we propose an evaluative framework that requires that priority setting practices at the macro and meso levels of the health system meet the following conditions: (1) Priority setting decisions should incorporate both efficiency and equity considerations as well as the following outcomes; (a) Stakeholder satisfaction, (b) Stakeholder understanding, (c) Shifted priorities (reallocation of resources), and (d) Implementation of decisions. (2) Priority setting processes should also meet the procedural conditions of (a) Stakeholder engagement, (b) Stakeholder empowerment, (c) Transparency, (d) Use of evidence, (e) Revisions, (f) Enforcement, and (g) Being grounded on community values. Available frameworks for the evaluation of priority setting are mostly grounded on procedural requirements, while few have included outcome requirements. There is, however, increasing recognition of the need to incorporate both consequential and procedural considerations in priority setting practices. In this review, we adapt an integrative approach to develop and propose a framework for the evaluation of priority setting practices at the macro and meso levels that draws from these complementary schools of thought. © 2015

  8. Setting Healthcare Priorities at the Macro and Meso Levels: A Framework for Evaluation

    Science.gov (United States)

    Barasa, Edwine W.; Molyneux, Sassy; English, Mike; Cleary, Susan

    2015-01-01

    Background: Priority setting in healthcare is a key determinant of health system performance. However, there is no widely accepted priority setting evaluation framework. We reviewed literature with the aim of developing and proposing a framework for the evaluation of macro and meso level healthcare priority setting practices. Methods: We systematically searched Econlit, PubMed, CINAHL, and EBSCOhost databases and supplemented this with searches in Google Scholar, relevant websites and reference lists of relevant papers. A total of 31 papers on evaluation of priority setting were identified. These were supplemented by broader theoretical literature related to evaluation of priority setting. A conceptual review of selected papers was undertaken. Results: Based on a synthesis of the selected literature, we propose an evaluative framework that requires that priority setting practices at the macro and meso levels of the health system meet the following conditions: (1) Priority setting decisions should incorporate both efficiency and equity considerations as well as the following outcomes; (a) Stakeholder satisfaction, (b) Stakeholder understanding, (c) Shifted priorities (reallocation of resources), and (d) Implementation of decisions. (2) Priority setting processes should also meet the procedural conditions of (a) Stakeholder engagement, (b) Stakeholder empowerment, (c) Transparency, (d) Use of evidence, (e) Revisions, (f) Enforcement, and (g) Being grounded on community values. Conclusion: Available frameworks for the evaluation of priority setting are mostly grounded on procedural requirements, while few have included outcome requirements. There is, however, increasing recognition of the need to incorporate both consequential and procedural considerations in priority setting practices. In this review, we adapt an integrative approach to develop and propose a framework for the evaluation of priority setting practices at the macro and meso levels that draws from these

  9. Setting Healthcare Priorities at the Macro and Meso Levels: A Framework for Evaluation

    Directory of Open Access Journals (Sweden)

    Edwine W. Barasa

    2015-11-01

    Full Text Available Background Priority setting in healthcare is a key determinant of health system performance. However, there is no widely accepted priority setting evaluation framework. We reviewed literature with the aim of developing and proposing a framework for the evaluation of macro and meso level healthcare priority setting practices. Methods We systematically searched Econlit, PubMed, CINAHL, and EBSCOhost databases and supplemented this with searches in Google Scholar, relevant websites and reference lists of relevant papers. A total of 31 papers on evaluation of priority setting were identified. These were supplemented by broader theoretical literature related to evaluation of priority setting. A conceptual review of selected papers was undertaken. Results Based on a synthesis of the selected literature, we propose an evaluative framework that requires that priority setting practices at the macro and meso levels of the health system meet the following conditions: (1 Priority setting decisions should incorporate both efficiency and equity considerations as well as the following outcomes; (a Stakeholder satisfaction, (b Stakeholder understanding, (c Shifted priorities (reallocation of resources, and (d Implementation of decisions. (2 Priority setting processes should also meet the procedural conditions of (a Stakeholder engagement, (b Stakeholder empowerment, (c Transparency, (d Use of evidence, (e Revisions, (f Enforcement, and (g Being grounded on community values. Conclusion Available frameworks for the evaluation of priority setting are mostly grounded on procedural requirements, while few have included outcome requirements. There is, however, increasing recognition of the need to incorporate both consequential and procedural considerations in priority setting practices. In this review, we adapt an integrative approach to develop and propose a framework for the evaluation of priority setting practices at the macro and meso levels that draws from

  10. Exact calculation of the time convolutionless master equation generator: Application to the nonequilibrium resonant level model

    Energy Technology Data Exchange (ETDEWEB)

    Kidon, Lyran [School of Chemistry, The Sackler Faculty of Exact Sciences, Tel Aviv University, Tel Aviv 69978 (Israel); The Sackler Center for Computational Molecular and Materials Science, Tel Aviv University, Tel Aviv 69978 (Israel); Wilner, Eli Y. [School of Physics and Astronomy, The Sackler Faculty of Exact Sciences, Tel Aviv University, Tel Aviv 69978 (Israel); Rabani, Eran [The Sackler Center for Computational Molecular and Materials Science, Tel Aviv University, Tel Aviv 69978 (Israel); Department of Chemistry, University of California and Lawrence Berkeley National Laboratory, Berkeley California 94720-1460 (United States)

    2015-12-21

    The generalized quantum master equation provides a powerful tool to describe the dynamics in quantum impurity models driven away from equilibrium. Two complementary approaches, one based on Nakajima–Zwanzig–Mori time-convolution (TC) and the other on the Tokuyama–Mori time-convolutionless (TCL) formulations provide a starting point to describe the time-evolution of the reduced density matrix. A key in both approaches is to obtain the so called “memory kernel” or “generator,” going beyond second or fourth order perturbation techniques. While numerically converged techniques are available for the TC memory kernel, the canonical approach to obtain the TCL generator is based on inverting a super-operator in the full Hilbert space, which is difficult to perform and thus, nearly all applications of the TCL approach rely on a perturbative scheme of some sort. Here, the TCL generator is expressed using a reduced system propagator which can be obtained from system observables alone and requires the calculation of super-operators and their inverse in the reduced Hilbert space rather than the full one. This makes the formulation amenable to quantum impurity solvers or to diagrammatic techniques, such as the nonequilibrium Green’s function. We implement the TCL approach for the resonant level model driven away from equilibrium and compare the time scales for the decay of the generator with that of the memory kernel in the TC approach. Furthermore, the effects of temperature, source-drain bias, and gate potential on the TCL/TC generators are discussed.

  11. 76 FR 9004 - Public Comment on Setting Achievement Levels in Writing

    Science.gov (United States)

    2011-02-16

    ... DEPARTMENT OF EDUCATION Public Comment on Setting Achievement Levels in Writing AGENCY: U.S... Achievement Levels in Writing. SUMMARY: The National Assessment Governing Board (Governing Board) is... for NAEP in writing. This notice provides opportunity for public comment and submitting...

  12. Application of physiologically based pharmacokinetic modeling in setting acute exposure guideline levels for methylene chloride.

    NARCIS (Netherlands)

    Bos, Peter Martinus Jozef; Zeilmaker, Marco Jacob; Eijkeren, Jan Cornelis Henri van

    2006-01-01

    Acute exposure guideline levels (AEGLs) are derived to protect the human population from adverse health effects in case of single exposure due to an accidental release of chemicals into the atmosphere. AEGLs are set at three different levels of increasing toxicity for exposure durations ranging from

  13. Accurate prediction of complex free surface flow around a high speed craft using a single-phase level set method

    Science.gov (United States)

    Broglia, Riccardo; Durante, Danilo

    2017-11-01

    This paper focuses on the analysis of a challenging free surface flow problem involving a surface vessel moving at high speeds, or planing. The investigation is performed using a general purpose high Reynolds free surface solver developed at CNR-INSEAN. The methodology is based on a second order finite volume discretization of the unsteady Reynolds-averaged Navier-Stokes equations (Di Mascio et al. in A second order Godunov—type scheme for naval hydrodynamics, Kluwer Academic/Plenum Publishers, Dordrecht, pp 253-261, 2001; Proceedings of 16th international offshore and polar engineering conference, San Francisco, CA, USA, 2006; J Mar Sci Technol 14:19-29, 2009); air/water interface dynamics is accurately modeled by a non standard level set approach (Di Mascio et al. in Comput Fluids 36(5):868-886, 2007a), known as the single-phase level set method. In this algorithm the governing equations are solved only in the water phase, whereas the numerical domain in the air phase is used for a suitable extension of the fluid dynamic variables. The level set function is used to track the free surface evolution; dynamic boundary conditions are enforced directly on the interface. This approach allows to accurately predict the evolution of the free surface even in the presence of violent breaking waves phenomena, maintaining the interface sharp, without any need to smear out the fluid properties across the two phases. This paper is aimed at the prediction of the complex free-surface flow field generated by a deep-V planing boat at medium and high Froude numbers (from 0.6 up to 1.2). In the present work, the planing hull is treated as a two-degree-of-freedom rigid object. Flow field is characterized by the presence of thin water sheets, several energetic breaking waves and plungings. The computational results include convergence of the trim angle, sinkage and resistance under grid refinement; high-quality experimental data are used for the purposes of validation, allowing to

  14. Variational Level Set Method for Two-Stage Image Segmentation Based on Morphological Gradients

    Directory of Open Access Journals (Sweden)

    Zemin Ren

    2014-01-01

    Full Text Available We use variational level set method and transition region extraction techniques to achieve image segmentation task. The proposed scheme is done by two steps. We first develop a novel algorithm to extract transition region based on the morphological gradient. After this, we integrate the transition region into a variational level set framework and develop a novel geometric active contour model, which include an external energy based on transition region and fractional order edge indicator function. The external energy is used to drive the zero level set toward the desired image features, such as object boundaries. Due to this external energy, the proposed model allows for more flexible initialization. The fractional order edge indicator function is incorporated into the length regularization term to diminish the influence of noise. Moreover, internal energy is added into the proposed model to penalize the deviation of the level set function from a signed distance function. The results evolution of the level set function is the gradient flow that minimizes the overall energy functional. The proposed model has been applied to both synthetic and real images with promising results.

  15. Appropriate criteria set for personnel promotion across organizational levels using analytic hierarchy process (AHP

    Directory of Open Access Journals (Sweden)

    Charles Noven Castillo

    2017-01-01

    Full Text Available Currently, there has been limited established specific set of criteria for personnel promotion to each level of the organization. This study is conducted in order to develop a personnel promotion strategy by identifying specific sets of criteria for each level of the organization. The complexity of identifying the criteria set along with the subjectivity of these criteria require the use of multi-criteria decision-making approach particularly the analytic hierarchy process (AHP. Results show different sets of criteria for each management level which are consistent with several frameworks in literature. These criteria sets would help avoid mismatch of employee skills and competencies and their job, and at the same time eliminate the issues in personnel promotion such as favouritism, glass ceiling, and gender and physical attractiveness preference. This work also shows that personality and traits, job satisfaction and experience and skills are more critical rather than social capital across different organizational levels. The contribution of this work is in identifying relevant criteria in developing a personnel promotion strategy across organizational levels.

  16. Regression Levels of Selected Affective Factors on Science Achievement: A Structural Equation Model with TIMSS 2011 Data

    Science.gov (United States)

    Akilli, Mustafa

    2015-01-01

    The aim of this study is to demonstrate the science success regression levels of chosen emotional features of 8th grade students using Structural Equation Model. The study was conducted by the analysis of students' questionnaires and science success in TIMSS 2011 data using SEM. Initially, the factors that are thought to have an effect on science…

  17. Priority setting at the micro-, meso- and macro-levels in Canada, Norway and Uganda.

    Science.gov (United States)

    Kapiriri, Lydia; Norheim, Ole Frithjof; Martin, Douglas K

    2007-06-01

    The objectives of this study were (1) to describe the process of healthcare priority setting in Ontario-Canada, Norway and Uganda at the three levels of decision-making; (2) to evaluate the description using the framework for fair priority setting, accountability for reasonableness; so as to identify lessons of good practices. We carried out case studies involving key informant interviews, with 184 health practitioners and health planners from the macro-level, meso-level and micro-level from Canada-Ontario, Norway and Uganda (selected by virtue of their varying experiences in priority setting). Interviews were audio-recorded, transcribed and analyzed using a modified thematic approach. The descriptions were evaluated against the four conditions of "accountability for reasonableness", relevance, publicity, revisions and enforcement. Areas of adherence to these conditions were identified as lessons of good practices; areas of non-adherence were identified as opportunities for improvement. (i) at the macro-level, in all three countries, cabinet makes most of the macro-level resource allocation decisions and they are influenced by politics, public pressure, and advocacy. Decisions within the ministries of health are based on objective formulae and evidence. International priorities influenced decisions in Uganda. Some priority-setting reasons are publicized through circulars, printed documents and the Internet in Canada and Norway. At the meso-level, hospital priority-setting decisions were made by the hospital managers and were based on national priorities, guidelines, and evidence. Hospital departments that handle emergencies, such as surgery, were prioritized. Some of the reasons are available on the hospital intranet or presented at meetings. Micro-level practitioners considered medical and social worth criteria. These reasons are not publicized. Many practitioners lacked knowledge of the macro- and meso-level priority-setting processes. (ii) Evaluation

  18. Reconstruction of thin electromagnetic inclusions by a level-set method

    International Nuclear Information System (INIS)

    Park, Won-Kwang; Lesselier, Dominique

    2009-01-01

    In this contribution, we consider a technique of electromagnetic imaging (at a single, non-zero frequency) which uses the level-set evolution method for reconstructing a thin inclusion (possibly made of disconnected parts) with either dielectric or magnetic contrast with respect to the embedding homogeneous medium. Emphasis is on the proof of the concept, the scattering problem at hand being so far based on a two-dimensional scalar model. To do so, two level-set functions are employed; the first one describes location and shape, and the other one describes connectivity and length. Speeds of evolution of the level-set functions are calculated via the introduction of Fréchet derivatives of a least-square cost functional. Several numerical experiments on noiseless and noisy data as well illustrate how the proposed method behaves

  19. Aerostructural Level Set Topology Optimization for a Common Research Model Wing

    Science.gov (United States)

    Dunning, Peter D.; Stanford, Bret K.; Kim, H. Alicia

    2014-01-01

    The purpose of this work is to use level set topology optimization to improve the design of a representative wing box structure for the NASA common research model. The objective is to minimize the total compliance of the structure under aerodynamic and body force loading, where the aerodynamic loading is coupled to the structural deformation. A taxi bump case was also considered, where only body force loads were applied. The trim condition that aerodynamic lift must balance the total weight of the aircraft is enforced by allowing the root angle of attack to change. The level set optimization method is implemented on an unstructured three-dimensional grid, so that the method can optimize a wing box with arbitrary geometry. Fast matching and upwind schemes are developed for an unstructured grid, which make the level set method robust and efficient. The adjoint method is used to obtain the coupled shape sensitivities required to perform aerostructural optimization of the wing box structure.

  20. Multi person detection and tracking based on hierarchical level-set method

    Science.gov (United States)

    Khraief, Chadia; Benzarti, Faouzi; Amiri, Hamid

    2018-04-01

    In this paper, we propose an efficient unsupervised method for mutli-person tracking based on hierarchical level-set approach. The proposed method uses both edge and region information in order to effectively detect objects. The persons are tracked on each frame of the sequence by minimizing an energy functional that combines color, texture and shape information. These features are enrolled in covariance matrix as region descriptor. The present method is fully automated without the need to manually specify the initial contour of Level-set. It is based on combined person detection and background subtraction methods. The edge-based is employed to maintain a stable evolution, guide the segmentation towards apparent boundaries and inhibit regions fusion. The computational cost of level-set is reduced by using narrow band technique. Many experimental results are performed on challenging video sequences and show the effectiveness of the proposed method.

  1. Level set methods for detonation shock dynamics using high-order finite elements

    Energy Technology Data Exchange (ETDEWEB)

    Dobrev, V. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Grogan, F. C. [Univ. of California, San Diego, CA (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kolev, T. V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rieben, R [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tomov, V. Z. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-05-26

    Level set methods are a popular approach to modeling evolving interfaces. We present a level set ad- vection solver in two and three dimensions using the discontinuous Galerkin method with high-order nite elements. During evolution, the level set function is reinitialized to a signed distance function to maintain ac- curacy. Our approach leads to stable front propagation and convergence on high-order, curved, unstructured meshes. The ability of the solver to implicitly track moving fronts lends itself to a number of applications; in particular, we highlight applications to high-explosive (HE) burn and detonation shock dynamics (DSD). We provide results for two- and three-dimensional benchmark problems as well as applications to DSD.

  2. A parametric level-set approach for topology optimization of flow domains

    DEFF Research Database (Denmark)

    Pingen, Georg; Waidmann, Matthias; Evgrafov, Anton

    2010-01-01

    of the design variables in the traditional approaches is seen as a possible cause for the slow convergence. Non-smooth material distributions are suspected to trigger premature onset of instationary flows which cannot be treated by steady-state flow models. In the present work, we study whether the convergence...... and the versatility of topology optimization methods for fluidic systems can be improved by employing a parametric level-set description. In general, level-set methods allow controlling the smoothness of boundaries, yield a non-local influence of design variables, and decouple the material description from the flow...... field discretization. The parametric level-set method used in this study utilizes a material distribution approach to represent flow boundaries, resulting in a non-trivial mapping between design variables and local material properties. Using a hydrodynamic lattice Boltzmann method, we study...

  3. Setting-level influences on implementation of the responsive classroom approach.

    Science.gov (United States)

    Wanless, Shannon B; Patton, Christine L; Rimm-Kaufman, Sara E; Deutsch, Nancy L

    2013-02-01

    We used mixed methods to examine the association between setting-level factors and observed implementation of a social and emotional learning intervention (Responsive Classroom® approach; RC). In study 1 (N = 33 3rd grade teachers after the first year of RC implementation), we identified relevant setting-level factors and uncovered the mechanisms through which they related to implementation. In study 2 (N = 50 4th grade teachers after the second year of RC implementation), we validated our most salient Study 1 finding across multiple informants. Findings suggested that teachers perceived setting-level factors, particularly principal buy-in to the intervention and individualized coaching, as influential to their degree of implementation. Further, we found that intervention coaches' perspectives of principal buy-in were more related to implementation than principals' or teachers' perspectives. Findings extend the application of setting theory to the field of implementation science and suggest that interventionists may want to consider particular accounts of school setting factors before determining the likelihood of schools achieving high levels of implementation.

  4. Robust boundary detection of left ventricles on ultrasound images using ASM-level set method.

    Science.gov (United States)

    Zhang, Yaonan; Gao, Yuan; Li, Hong; Teng, Yueyang; Kang, Yan

    2015-01-01

    Level set method has been widely used in medical image analysis, but it has difficulties when being used in the segmentation of left ventricular (LV) boundaries on echocardiography images because the boundaries are not very distinguish, and the signal-to-noise ratio of echocardiography images is not very high. In this paper, we introduce the Active Shape Model (ASM) into the traditional level set method to enforce shape constraints. It improves the accuracy of boundary detection and makes the evolution more efficient. The experiments conducted on the real cardiac ultrasound image sequences show a positive and promising result.

  5. Testing strong factorial invariance using three-level structural equation modeling

    NARCIS (Netherlands)

    Jak, Suzanne

    Within structural equation modeling, the most prevalent model to investigate measurement bias is the multigroup model. Equal factor loadings and intercepts across groups in a multigroup model represent strong factorial invariance (absence of measurement bias) across groups. Although this approach is

  6. A comparative study of reinitialization approaches of the level set method for simulating free-surface flows

    Energy Technology Data Exchange (ETDEWEB)

    Sufyan, Muhammad; Ngo, Long Cu; Choi, Hyoung Gwon [Seoul National University, Seoul (Korea, Republic of)

    2016-04-15

    Unstructured grids were used to compare the performance of a direct reinitialization scheme with those of two reinitialization approaches based on the solution of a hyperbolic Partial differential equation (PDE). The problems of moving interface were solved in the context of a finite element method. A least-square weighted residual method was used to discretize the advection equation of the level set method. The benchmark problems of rotating Zalesak's disk, time-reversed single vortex, and two-dimensional sloshing were examined. Numerical results showed that the direct reinitialization scheme performed better than the PDE-based reinitialization approaches in terms of mass conservation, dissipation and dispersion error, and computational time. In the case of sloshing, numerical results were found to be in good agreement with existing experimental data. The direct reinitialization approach consumed considerably less CPU time than the PDE-based simulations for 20 time periods of sloshing. This approach was stable, accurate, and efficient for all the problems considered in this study.

  7. Individual-and Setting-Level Correlates of Secondary Traumatic Stress in Rape Crisis Center Staff.

    Science.gov (United States)

    Dworkin, Emily R; Sorell, Nicole R; Allen, Nicole E

    2016-02-01

    Secondary traumatic stress (STS) is an issue of significant concern among providers who work with survivors of sexual assault. Although STS has been studied in relation to individual-level characteristics of a variety of types of trauma responders, less research has focused specifically on rape crisis centers as environments that might convey risk or protection from STS, and no research to knowledge has modeled setting-level variation in correlates of STS. The current study uses a sample of 164 staff members representing 40 rape crisis centers across a single Midwestern state to investigate the staff member-and agency-level correlates of STS. Results suggest that correlates exist at both levels of analysis. Younger age and greater severity of sexual assault history were statistically significant individual-level predictors of increased STS. Greater frequency of supervision was more strongly related to secondary stress for non-advocates than for advocates. At the setting level, lower levels of supervision and higher client loads agency-wide accounted for unique variance in staff members' STS. These findings suggest that characteristics of both providers and their settings are important to consider when understanding their STS. © The Author(s) 2014.

  8. A Variational Level Set Model Combined with FCMS for Image Clustering Segmentation

    Directory of Open Access Journals (Sweden)

    Liming Tang

    2014-01-01

    Full Text Available The fuzzy C means clustering algorithm with spatial constraint (FCMS is effective for image segmentation. However, it lacks essential smoothing constraints to the cluster boundaries and enough robustness to the noise. Samson et al. proposed a variational level set model for image clustering segmentation, which can get the smooth cluster boundaries and closed cluster regions due to the use of level set scheme. However it is very sensitive to the noise since it is actually a hard C means clustering model. In this paper, based on Samson’s work, we propose a new variational level set model combined with FCMS for image clustering segmentation. Compared with FCMS clustering, the proposed model can get smooth cluster boundaries and closed cluster regions due to the use of level set scheme. In addition, a block-based energy is incorporated into the energy functional, which enables the proposed model to be more robust to the noise than FCMS clustering and Samson’s model. Some experiments on the synthetic and real images are performed to assess the performance of the proposed model. Compared with some classical image segmentation models, the proposed model has a better performance for the images contaminated by different noise levels.

  9. Demons versus level-set motion registration for coronary 18F-sodium fluoride PET

    Science.gov (United States)

    Rubeaux, Mathieu; Joshi, Nikhil; Dweck, Marc R.; Fletcher, Alison; Motwani, Manish; Thomson, Louise E.; Germano, Guido; Dey, Damini; Berman, Daniel S.; Newby, David E.; Slomka, Piotr J.

    2016-03-01

    Ruptured coronary atherosclerotic plaques commonly cause acute myocardial infarction. It has been recently shown that active microcalcification in the coronary arteries, one of the features that characterizes vulnerable plaques at risk of rupture, can be imaged using cardiac gated 18F-sodium fluoride (18F-NaF) PET. We have shown in previous work that a motion correction technique applied to cardiac-gated 18F-NaF PET images can enhance image quality and improve uptake estimates. In this study, we further investigated the applicability of different algorithms for registration of the coronary artery PET images. In particular, we aimed to compare demons vs. level-set nonlinear registration techniques applied for the correction of cardiac motion in coronary 18F-NaF PET. To this end, fifteen patients underwent 18F-NaF PET and prospective coronary CT angiography (CCTA). PET data were reconstructed in 10 ECG gated bins; subsequently these gated bins were registered using demons and level-set methods guided by the extracted coronary arteries from CCTA, to eliminate the effect of cardiac motion on PET images. Noise levels, target-to-background ratios (TBR) and global motion were compared to assess image quality. Compared to the reference standard of using only diastolic PET image (25% of the counts from PET acquisition), cardiac motion registration using either level-set or demons techniques almost halved image noise due to the use of counts from the full PET acquisition and increased TBR difference between 18F-NaF positive and negative lesions. The demons method produces smoother deformation fields, exhibiting no singularities (which reflects how physically plausible the registration deformation is), as compared to the level-set method, which presents between 4 and 8% of singularities, depending on the coronary artery considered. In conclusion, the demons method produces smoother motion fields as compared to the level-set method, with a motion that is physiologically

  10. Analysis of Forensic Autopsy in 120 Cases of Medical Disputes Among Different Levels of Institutional Settings.

    Science.gov (United States)

    Yu, Lin-Sheng; Ye, Guang-Hua; Fan, Yan-Yan; Li, Xing-Biao; Feng, Xiang-Ping; Han, Jun-Ge; Lin, Ke-Zhi; Deng, Miao-Wu; Li, Feng

    2015-09-01

    Despite advances in medical science, the causes of death can sometimes only be determined by pathologists after a complete autopsy. Few studies have investigated the importance of forensic autopsy in medically disputed cases among different levels of institutional settings. Our study aimed to analyze forensic autopsy in 120 cases of medical disputes among five levels of institutional settings between 2001 and 2012 in Wenzhou, China. The results showed an overall concordance rate of 55%. Of the 39% of clinically missed diagnosis, cardiovascular pathology comprises 55.32%, while respiratory pathology accounts for the remaining 44. 68%. Factors that increase the likelihood of missed diagnoses were private clinics, community settings, and county hospitals. These results support that autopsy remains an important tool in establishing causes of death in medically disputed case, which may directly determine or exclude the fault of medical care and therefore in helping in resolving these cases. © 2015 American Academy of Forensic Sciences.

  11. An investigation of children's levels of inquiry in an informal science setting

    Science.gov (United States)

    Clark-Thomas, Beth Anne

    Elementary school students' understanding of both science content and processes are enhanced by the higher level thinking associated with inquiry-based science investigations. Informal science setting personnel, elementary school teachers, and curriculum specialists charged with designing inquiry-based investigations would be well served by an understanding of the varying influence of certain present factors upon the students' willingness and ability to delve into such higher level inquiries. This study examined young children's use of inquiry-based materials and factors which may influence the level of inquiry they engaged in during informal science activities. An informal science setting was selected as the context for the examination of student inquiry behaviors because of the rich inquiry-based environment present at the site and the benefits previously noted in the research regarding the impact of informal science settings upon the construction of knowledge in science. The study revealed several patterns of behavior among children when they are engaged in inquiry-based activities at informal science exhibits. These repeated behaviors varied in the children's apparent purposeful use of the materials at the exhibits. These levels of inquiry behavior were taxonomically defined as high/medium/low within this study utilizing a researcher-developed tool. Furthermore, in this study adult interventions, questions, or prompting were found to impact the level of inquiry engaged in by the children. This study revealed that higher levels of inquiry were preceded by task directed and physical feature prompts. Moreover, the levels of inquiry behaviors were haltered, even lowered, when preceded by a prompt that focused on a science content or concept question. Results of this study have implications for the enhancement of inquiry-based science activities in elementary schools as well as in informal science settings. These findings have significance for all science educators

  12. Education level inequalities and transportation injury mortality in the middle aged and elderly in European settings

    NARCIS (Netherlands)

    Borrell, C.; Plasència, A.; Huisman, M.; Costa, G.; Kunst, A.; Andersen, O.; Bopp, M.; Borgan, J.-K.; Deboosere, P.; Glickman, M.; Gadeyne, S.; Minder, C.; Regidor, E.; Spadea, T.; Valkonen, T.; Mackenbach, J. P.

    2005-01-01

    OBJECTIVE: To study the differential distribution of transportation injury mortality by educational level in nine European settings, among people older than 30 years, during the 1990s. METHODS: Deaths of men and women older than 30 years from transportation injuries were studied. Rate differences

  13. A thick level set interface model for simulating fatigue-drive delamination in composites

    NARCIS (Netherlands)

    Latifi, M.; Van der Meer, F.P.; Sluys, L.J.

    2015-01-01

    This paper presents a new damage model for simulating fatigue-driven delamination in composite laminates. This model is developed based on the Thick Level Set approach (TLS) and provides a favorable link between damage mechanics and fracture mechanics through the non-local evaluation of the energy

  14. Level of health care and services in a tertiary health setting in Nigeria

    African Journals Online (AJOL)

    Level of health care and services in a tertiary health setting in Nigeria. ... Background: There is a growing awareness and demand for quality health care across the world; hence the ... Doctors and nurses formed 64.3% of the study population.

  15. Fast Streaming 3D Level set Segmentation on the GPU for Smooth Multi-phase Segmentation

    DEFF Research Database (Denmark)

    Sharma, Ojaswa; Zhang, Qin; Anton, François

    2011-01-01

    Level set method based segmentation provides an efficient tool for topological and geometrical shape handling, but it is slow due to high computational burden. In this work, we provide a framework for streaming computations on large volumetric images on the GPU. A streaming computational model...

  16. Multi-domain, higher order level set scheme for 3D image segmentation on the GPU

    DEFF Research Database (Denmark)

    Sharma, Ojaswa; Zhang, Qin; Anton, François

    2010-01-01

    to evaluate level set surfaces that are $C^2$ continuous, but are slow due to high computational burden. In this paper, we provide a higher order GPU based solver for fast and efficient segmentation of large volumetric images. We also extend the higher order method to multi-domain segmentation. Our streaming...

  17. An Optimized, Grid Independent, Narrow Band Data Structure for High Resolution Level Sets

    DEFF Research Database (Denmark)

    Nielsen, Michael Bang; Museth, Ken

    2004-01-01

    enforced by the convex boundaries of an underlying cartesian computational grid. Here we present a novel very memory efficient narrow band data structure, dubbed the Sparse Grid, that enables the representation of grid independent high resolution level sets. The key features our new data structure are...

  18. Scope of physician procedures independently billed by mid-level providers in the office setting.

    Science.gov (United States)

    Coldiron, Brett; Ratnarathorn, Mondhipa

    2014-11-01

    Mid-level providers (nurse practitioners and physician assistants) were originally envisioned to provide primary care services in underserved areas. This study details the current scope of independent procedural billing to Medicare of difficult, invasive, and surgical procedures by medical mid-level providers. To understand the scope of independent billing to Medicare for procedures performed by mid-level providers in an outpatient office setting for a calendar year. Analyses of the 2012 Medicare Physician/Supplier Procedure Summary Master File, which reflects fee-for-service claims that were paid by Medicare, for Current Procedural Terminology procedures independently billed by mid-level providers. Outpatient office setting among health care providers. The scope of independent billing to Medicare for procedures performed by mid-level providers. In 2012, nurse practitioners and physician assistants billed independently for more than 4 million procedures at our cutoff of 5000 paid claims per procedure. Most (54.8%) of these procedures were performed in the specialty area of dermatology. The findings of this study are relevant to safety and quality of care. Recently, the shortage of primary care clinicians has prompted discussion of widening the scope of practice for mid-level providers. It would be prudent to temper widening the scope of practice of mid-level providers by recognizing that mid-level providers are not solely limited to primary care, and may involve procedures for which they may not have formal training.

  19. Online monitoring of oil film using electrical capacitance tomography and level set method

    International Nuclear Information System (INIS)

    Xue, Q.; Ma, M.; Sun, B. Y.; Cui, Z. Q.; Wang, H. X.

    2015-01-01

    In the application of oil-air lubrication system, electrical capacitance tomography (ECT) provides a promising way for monitoring oil film in the pipelines by reconstructing cross sectional oil distributions in real time. While in the case of small diameter pipe and thin oil film, the thickness of the oil film is hard to be observed visually since the interface of oil and air is not obvious in the reconstructed images. And the existence of artifacts in the reconstructions has seriously influenced the effectiveness of image segmentation techniques such as level set method. Besides, level set method is also unavailable for online monitoring due to its low computation speed. To address these problems, a modified level set method is developed: a distance regularized level set evolution formulation is extended to image two-phase flow online using an ECT system, a narrowband image filter is defined to eliminate the influence of artifacts, and considering the continuity of the oil distribution variation, the detected oil-air interface of a former image can be used as the initial contour for the detection of the subsequent frame; thus, the propagation from the initial contour to the boundary can be greatly accelerated, making it possible for real time tracking. To testify the feasibility of the proposed method, an oil-air lubrication facility with 4 mm inner diameter pipe is measured in normal operation using an 8-electrode ECT system. Both simulation and experiment results indicate that the modified level set method is capable of visualizing the oil-air interface accurately online

  20. INTEGRATED SFM TECHNIQUES USING DATA SET FROM GOOGLE EARTH 3D MODEL AND FROM STREET LEVEL

    Directory of Open Access Journals (Sweden)

    L. Inzerillo

    2017-08-01

    Full Text Available Structure from motion (SfM represents a widespread photogrammetric method that uses the photogrammetric rules to carry out a 3D model from a photo data set collection. Some complex ancient buildings, such as Cathedrals, or Theatres, or Castles, etc. need to implement the data set (realized from street level with the UAV one in order to have the 3D roof reconstruction. Nevertheless, the use of UAV is strong limited from the government rules. In these last years, Google Earth (GE has been enriched with the 3D models of the earth sites. For this reason, it seemed convenient to start to test the potentiality offered by GE in order to extract from it a data set that replace the UAV function, to close the aerial building data set, using screen images of high resolution 3D models. Users can take unlimited “aerial photos” of a scene while flying around in GE at any viewing angle and altitude. The challenge is to verify the metric reliability of the SfM model carried out with an integrated data set (the one from street level and the one from GE aimed at replace the UAV use in urban contest. This model is called integrated GE SfM model (i-GESfM. In this paper will be present a case study: the Cathedral of Palermo.

  1. Second level semi-degenerate fields in W{sub 3} Toda theory: matrix element and differential equation

    Energy Technology Data Exchange (ETDEWEB)

    Belavin, Vladimir [I.E. Tamm Department of Theoretical Physics, P.N. Lebedev Physical Institute,Leninsky Avenue 53, 119991 Moscow (Russian Federation); Department of Quantum Physics, Institute for Information Transmission Problems,Bolshoy Karetny per. 19, 127994 Moscow (Russian Federation); Moscow Institute of Physics and Technology,Dolgoprudnyi, 141700 Moscow region (Russian Federation); Cao, Xiangyu [LPTMS, CNRS (UMR 8626), Université Paris-Saclay,15 rue Georges Clémenceau, 91405 Orsay (France); Estienne, Benoit [LPTHE, CNRS and Université Pierre et Marie Curie, Sorbonne Universités,4 Place Jussieu, 75252 Paris Cedex 05 (France); Santachiara, Raoul [LPTMS, CNRS (UMR 8626), Université Paris-Saclay,15 rue Georges Clémenceau, 91405 Orsay (France)

    2017-03-02

    In a recent study we considered W{sub 3} Toda 4-point functions that involve matrix elements of a primary field with the highest-weight in the adjoint representation of sl{sub 3}. We generalize this result by considering a semi-degenerate primary field, which has one null vector at level two. We obtain a sixth-order Fuchsian differential equation for the conformal blocks. We discuss the presence of multiplicities, the matrix elements and the fusion rules.

  2. Setting the stage for the review of the international estimate of short-term intake (IESTI) equation.

    NARCIS (Netherlands)

    Richter, Anke; Sieke, Christian; Reich, Hermine; Ossendorp, Bernadette C; Breysse, Nicolas; Lutze, Jason; Mahieu, Karin; Margerison, Sam; Rietveld, Anton; Sarda, Xavier; Vial, Gaelle; van der Velde-Koerts, Trijntje

    2018-01-01

    In the framework of setting Maximum Residue Limits (MRLs) for pesticides, both chronic and acute health risks to consumers arising from the long-term and short-term dietary exposure to pesticide residues have to be assessed. The current internationally harmonized approach for assessing the acute

  3. Numerical Boundary Conditions for Specular Reflection in a Level-Sets-Based Wavefront Propagation Method

    Science.gov (United States)

    2012-12-01

    acoustics One begins with Eikonal equation for the acoustic phase function S(t,x) as derived from the geometric acoustics (high frequency) approximation to...zb(x) is smooth and reasonably approximated as piecewise linear. The time domain ray (characteristic) equations for the Eikonal equation are ẋ(t)= c...travel time is affected, which is more physically relevant than global error in φ since it provides the phase information for the Eikonal equation (2.1

  4. Level set segmentation of bovine corpora lutea in ex situ ovarian ultrasound images

    Directory of Open Access Journals (Sweden)

    Adams Gregg P

    2008-08-01

    Full Text Available Abstract Background The objective of this study was to investigate the viability of level set image segmentation methods for the detection of corpora lutea (corpus luteum, CL boundaries in ultrasonographic ovarian images. It was hypothesized that bovine CL boundaries could be located within 1–2 mm by a level set image segmentation methodology. Methods Level set methods embed a 2D contour in a 3D surface and evolve that surface over time according to an image-dependent speed function. A speed function suitable for segmentation of CL's in ovarian ultrasound images was developed. An initial contour was manually placed and contour evolution was allowed to proceed until the rate of change of the area was sufficiently small. The method was tested on ovarian ultrasonographic images (n = 8 obtained ex situ. A expert in ovarian ultrasound interpretation delineated CL boundaries manually to serve as a "ground truth". Accuracy of the level set segmentation algorithm was determined by comparing semi-automatically determined contours with ground truth contours using the mean absolute difference (MAD, root mean squared difference (RMSD, Hausdorff distance (HD, sensitivity, and specificity metrics. Results and discussion The mean MAD was 0.87 mm (sigma = 0.36 mm, RMSD was 1.1 mm (sigma = 0.47 mm, and HD was 3.4 mm (sigma = 2.0 mm indicating that, on average, boundaries were accurate within 1–2 mm, however, deviations in excess of 3 mm from the ground truth were observed indicating under- or over-expansion of the contour. Mean sensitivity and specificity were 0.814 (sigma = 0.171 and 0.990 (sigma = 0.00786, respectively, indicating that CLs were consistently undersegmented but rarely did the contour interior include pixels that were judged by the human expert not to be part of the CL. It was observed that in localities where gradient magnitudes within the CL were strong due to high contrast speckle, contour expansion stopped too early. Conclusion The

  5. Image-guided regularization level set evolution for MR image segmentation and bias field correction.

    Science.gov (United States)

    Wang, Lingfeng; Pan, Chunhong

    2014-01-01

    Magnetic resonance (MR) image segmentation is a crucial step in surgical and treatment planning. In this paper, we propose a level-set-based segmentation method for MR images with intensity inhomogeneous problem. To tackle the initialization sensitivity problem, we propose a new image-guided regularization to restrict the level set function. The maximum a posteriori inference is adopted to unify segmentation and bias field correction within a single framework. Under this framework, both the contour prior and the bias field prior are fully used. As a result, the image intensity inhomogeneity can be well solved. Extensive experiments are provided to evaluate the proposed method, showing significant improvements in both segmentation and bias field correction accuracies as compared with other state-of-the-art approaches. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Automatic segmentation of Leishmania parasite in microscopic images using a modified CV level set method

    Science.gov (United States)

    Farahi, Maria; Rabbani, Hossein; Talebi, Ardeshir; Sarrafzadeh, Omid; Ensafi, Shahab

    2015-12-01

    Visceral Leishmaniasis is a parasitic disease that affects liver, spleen and bone marrow. According to World Health Organization report, definitive diagnosis is possible just by direct observation of the Leishman body in the microscopic image taken from bone marrow samples. We utilize morphological and CV level set method to segment Leishman bodies in digital color microscopic images captured from bone marrow samples. Linear contrast stretching method is used for image enhancement and morphological method is applied to determine the parasite regions and wipe up unwanted objects. Modified global and local CV level set methods are proposed for segmentation and a shape based stopping factor is used to hasten the algorithm. Manual segmentation is considered as ground truth to evaluate the proposed method. This method is tested on 28 samples and achieved 10.90% mean of segmentation error for global model and 9.76% for local model.

  7. A Cartesian Adaptive Level Set Method for Two-Phase Flows

    Science.gov (United States)

    Ham, F.; Young, Y.-N.

    2003-01-01

    In the present contribution we develop a level set method based on local anisotropic Cartesian adaptation as described in Ham et al. (2002). Such an approach should allow for the smallest possible Cartesian grid capable of resolving a given flow. The remainder of the paper is organized as follows. In section 2 the level set formulation for free surface calculations is presented and its strengths and weaknesses relative to the other free surface methods reviewed. In section 3 the collocated numerical method is described. In section 4 the method is validated by solving the 2D and 3D drop oscilation problem. In section 5 we present some results from more complex cases including the 3D drop breakup in an impulsively accelerated free stream, and the 3D immiscible Rayleigh-Taylor instability. Conclusions are given in section 6.

  8. Application of the level set method for multi-phase flow computation in fusion engineering

    International Nuclear Information System (INIS)

    Luo, X-Y.; Ni, M-J.; Ying, A.; Abdou, M.

    2006-01-01

    Numerical simulation of multi-phase flow is essential to evaluate the feasibility of a liquid protection scheme for the power plant chamber. The level set method is one of the best methods for computing and analyzing the motion of interface among the multi-phase flow. This paper presents a general formula for the second-order projection method combined with the level set method to simulate unsteady incompressible multi-phase flow with/out phase change flow encountered in fusion science and engineering. The third-order ENO scheme and second-order semi-implicit Crank-Nicholson scheme is used to update the convective and diffusion term. The numerical results show this method can handle the complex deformation of the interface and the effect of liquid-vapor phase change will be included in the future work

  9. Level-set-based reconstruction algorithm for EIT lung images: first clinical results.

    Science.gov (United States)

    Rahmati, Peyman; Soleimani, Manuchehr; Pulletz, Sven; Frerichs, Inéz; Adler, Andy

    2012-05-01

    We show the first clinical results using the level-set-based reconstruction algorithm for electrical impedance tomography (EIT) data. The level-set-based reconstruction method (LSRM) allows the reconstruction of non-smooth interfaces between image regions, which are typically smoothed by traditional voxel-based reconstruction methods (VBRMs). We develop a time difference formulation of the LSRM for 2D images. The proposed reconstruction method is applied to reconstruct clinical EIT data of a slow flow inflation pressure-volume manoeuvre in lung-healthy and adult lung-injury patients. Images from the LSRM and the VBRM are compared. The results show comparable reconstructed images, but with an improved ability to reconstruct sharp conductivity changes in the distribution of lung ventilation using the LSRM.

  10. Level-set-based reconstruction algorithm for EIT lung images: first clinical results

    International Nuclear Information System (INIS)

    Rahmati, Peyman; Adler, Andy; Soleimani, Manuchehr; Pulletz, Sven; Frerichs, Inéz

    2012-01-01

    We show the first clinical results using the level-set-based reconstruction algorithm for electrical impedance tomography (EIT) data. The level-set-based reconstruction method (LSRM) allows the reconstruction of non-smooth interfaces between image regions, which are typically smoothed by traditional voxel-based reconstruction methods (VBRMs). We develop a time difference formulation of the LSRM for 2D images. The proposed reconstruction method is applied to reconstruct clinical EIT data of a slow flow inflation pressure–volume manoeuvre in lung-healthy and adult lung-injury patients. Images from the LSRM and the VBRM are compared. The results show comparable reconstructed images, but with an improved ability to reconstruct sharp conductivity changes in the distribution of lung ventilation using the LSRM. (paper)

  11. Kir2.1 channels set two levels of resting membrane potential with inward rectification.

    Science.gov (United States)

    Chen, Kuihao; Zuo, Dongchuan; Liu, Zheng; Chen, Haijun

    2018-04-01

    Strong inward rectifier K + channels (Kir2.1) mediate background K + currents primarily responsible for maintenance of resting membrane potential. Multiple types of cells exhibit two levels of resting membrane potential. Kir2.1 and K2P1 currents counterbalance, partially accounting for the phenomenon of human cardiomyocytes in subphysiological extracellular K + concentrations or pathological hypokalemic conditions. The mechanism of how Kir2.1 channels contribute to the two levels of resting membrane potential in different types of cells is not well understood. Here we test the hypothesis that Kir2.1 channels set two levels of resting membrane potential with inward rectification. Under hypokalemic conditions, Kir2.1 currents counterbalance HCN2 or HCN4 cation currents in CHO cells that heterologously express both channels, generating N-shaped current-voltage relationships that cross the voltage axis three times and reconstituting two levels of resting membrane potential. Blockade of HCN channels eliminated the phenomenon in K2P1-deficient Kir2.1-expressing human cardiomyocytes derived from induced pluripotent stem cells or CHO cells expressing both Kir2.1 and HCN2 channels. Weakly inward rectifier Kir4.1 or inward rectification-deficient Kir2.1•E224G mutant channels do not set such two levels of resting membrane potential when co-expressed with HCN2 channels in CHO cells or when overexpressed in human cardiomyocytes derived from induced pluripotent stem cells. These findings demonstrate a common mechanism that Kir2.1 channels set two levels of resting membrane potential with inward rectification by balancing inward currents through different cation channels such as hyperpolarization-activated HCN channels or hypokalemia-induced K2P1 leak channels.

  12. Reconstruction of incomplete cell paths through a 3D-2D level set segmentation

    Science.gov (United States)

    Hariri, Maia; Wan, Justin W. L.

    2012-02-01

    Segmentation of fluorescent cell images has been a popular technique for tracking live cells. One challenge of segmenting cells from fluorescence microscopy is that cells in fluorescent images frequently disappear. When the images are stacked together to form a 3D image volume, the disappearance of the cells leads to broken cell paths. In this paper, we present a segmentation method that can reconstruct incomplete cell paths. The key idea of this model is to perform 2D segmentation in a 3D framework. The 2D segmentation captures the cells that appear in the image slices while the 3D segmentation connects the broken cell paths. The formulation is similar to the Chan-Vese level set segmentation which detects edges by comparing the intensity value at each voxel with the mean intensity values inside and outside of the level set surface. Our model, however, performs the comparison on each 2D slice with the means calculated by the 2D projected contour. The resulting effect is to segment the cells on each image slice. Unlike segmentation on each image frame individually, these 2D contours together form the 3D level set function. By enforcing minimum mean curvature on the level set surface, our segmentation model is able to extend the cell contours right before (and after) the cell disappears (and reappears) into the gaps, eventually connecting the broken paths. We will present segmentation results of C2C12 cells in fluorescent images to illustrate the effectiveness of our model qualitatively and quantitatively by different numerical examples.

  13. Computing the dynamics of biomembranes by combining conservative level set and adaptive finite element methods

    OpenAIRE

    Laadhari , Aymen; Saramito , Pierre; Misbah , Chaouqi

    2014-01-01

    International audience; The numerical simulation of the deformation of vesicle membranes under simple shear external fluid flow is considered in this paper. A new saddle-point approach is proposed for the imposition of the fluid incompressibility and the membrane inextensibility constraints, through Lagrange multipliers defined in the fluid and on the membrane respectively. Using a level set formulation, the problem is approximated by mixed finite elements combined with an automatic adaptive ...

  14. A level set method for cupping artifact correction in cone-beam CT

    International Nuclear Information System (INIS)

    Xie, Shipeng; Li, Haibo; Ge, Qi; Li, Chunming

    2015-01-01

    Purpose: To reduce cupping artifacts and improve the contrast-to-noise ratio in cone-beam computed tomography (CBCT). Methods: A level set method is proposed to reduce cupping artifacts in the reconstructed image of CBCT. The authors derive a local intensity clustering property of the CBCT image and define a local clustering criterion function of the image intensities in a neighborhood of each point. This criterion function defines an energy in terms of the level set functions, which represent a segmentation result and the cupping artifacts. The cupping artifacts are estimated as a result of minimizing this energy. Results: The cupping artifacts in CBCT are reduced by an average of 90%. The results indicate that the level set-based algorithm is practical and effective for reducing the cupping artifacts and preserving the quality of the reconstructed image. Conclusions: The proposed method focuses on the reconstructed image without requiring any additional physical equipment, is easily implemented, and provides cupping correction through a single-scan acquisition. The experimental results demonstrate that the proposed method successfully reduces the cupping artifacts

  15. Level-set simulations of buoyancy-driven motion of single and multiple bubbles

    International Nuclear Information System (INIS)

    Balcázar, Néstor; Lehmkuhl, Oriol; Jofre, Lluís; Oliva, Assensi

    2015-01-01

    Highlights: • A conservative level-set method is validated and verified. • An extensive study of buoyancy-driven motion of single bubbles is performed. • The interactions of two spherical and ellipsoidal bubbles is studied. • The interaction of multiple bubbles is simulated in a vertical channel. - Abstract: This paper presents a numerical study of buoyancy-driven motion of single and multiple bubbles by means of the conservative level-set method. First, an extensive study of the hydrodynamics of single bubbles rising in a quiescent liquid is performed, including its shape, terminal velocity, drag coefficients and wake patterns. These results are validated against experimental and numerical data well established in the scientific literature. Then, a further study on the interaction of two spherical and ellipsoidal bubbles is performed for different orientation angles. Finally, the interaction of multiple bubbles is explored in a periodic vertical channel. The results show that the conservative level-set approach can be used for accurate modelling of bubble dynamics. Moreover, it is demonstrated that the present method is numerically stable for a wide range of Morton and Reynolds numbers.

  16. Stabilized Conservative Level Set Method with Adaptive Wavelet-based Mesh Refinement

    Science.gov (United States)

    Shervani-Tabar, Navid; Vasilyev, Oleg V.

    2016-11-01

    This paper addresses one of the main challenges of the conservative level set method, namely the ill-conditioned behavior of the normal vector away from the interface. An alternative formulation for reconstruction of the interface is proposed. Unlike the commonly used methods which rely on the unit normal vector, Stabilized Conservative Level Set (SCLS) uses a modified renormalization vector with diminishing magnitude away from the interface. With the new formulation, in the vicinity of the interface the reinitialization procedure utilizes compressive flux and diffusive terms only in the normal direction to the interface, thus, preserving the conservative level set properties, while away from the interfaces the directional diffusion mechanism automatically switches to homogeneous diffusion. The proposed formulation is robust and general. It is especially well suited for use with adaptive mesh refinement (AMR) approaches due to need for a finer resolution in the vicinity of the interface in comparison with the rest of the domain. All of the results were obtained using the Adaptive Wavelet Collocation Method, a general AMR-type method, which utilizes wavelet decomposition to adapt on steep gradients in the solution while retaining a predetermined order of accuracy.

  17. Considering Actionability at the Participant's Research Setting Level for Anticipatable Incidental Findings from Clinical Research.

    Science.gov (United States)

    Ortiz-Osorno, Alberto Betto; Ehler, Linda A; Brooks, Judith

    2015-01-01

    Determining what constitutes an anticipatable incidental finding (IF) from clinical research and defining whether, and when, this IF should be returned to the participant have been topics of discussion in the field of human subject protections for the last 10 years. It has been debated that implementing a comprehensive IF-approach that addresses both the responsibility of researchers to return IFs and the expectation of participants to receive them can be logistically challenging. IFs have been debated at different levels, such as the ethical reasoning for considering their disclosure or the need for planning for them during the development of the research study. Some authors have discussed the methods for re-contacting participants for disclosing IFs, as well as the relevance of considering the clinical importance of the IFs. Similarly, other authors have debated about when IFs should be disclosed to participants. However, no author has addressed how the "actionability" of the IFs should be considered, evaluated, or characterized at the participant's research setting level. This paper defines the concept of "Actionability at the Participant's Research Setting Level" (APRSL) for anticipatable IFs from clinical research, discusses some related ethical concepts to justify the APRSL concept, proposes a strategy to incorporate APRSL into the planning and management of IFs, and suggests a strategy for integrating APRSL at each local research setting. © 2015 American Society of Law, Medicine & Ethics, Inc.

  18. Records for radioactive waste management up to repository closure: Managing the primary level information (PLI) set

    International Nuclear Information System (INIS)

    2004-07-01

    The objective of this publication is to highlight the importance of the early establishment of a comprehensive records system to manage primary level information (PLI) as an integrated set of information, not merely as a collection of information, throughout all the phases of radioactive waste management. Early establishment of a comprehensive records system to manage Primary Level Information as an integrated set of information throughout all phases of radioactive waste management is important. In addition to the information described in the waste inventory record keeping system (WIRKS), the PLI of a radioactive waste repository consists of the entire universe of information, data and records related to any aspect of the repository's life cycle. It is essential to establish PLI requirements based on integrated set of needs from Regulators and Waste Managers involved in the waste management chain and to update these requirements as needs change over time. Information flow for radioactive waste management should be back-end driven. Identification of an Authority that will oversee the management of PLI throughout all phases of the radioactive waste management life cycle would guarantee the information flow to future generations. The long term protection of information essential to future generations can only be assured by the timely establishment of a comprehensive and effective RMS capable of capturing, indexing and evaluating all PLI. The loss of intellectual control over the PLI will make it very difficult to subsequently identify the ILI and HLI information sets. At all times prior to the closure of a radioactive waste repository, there should be an identifiable entity with a legally enforceable financial and management responsibility for the continued operation of a PLI Records Management System. The information presented in this publication will assist Member States in ensuring that waste and repository records, relevant for retention after repository closure

  19. FIFI 3: A digital computer code for the solution of sets of first order differential equations and the analysis of process plant dynamics

    International Nuclear Information System (INIS)

    Sumner, H.M.

    1965-11-01

    FIFI 3 is a FORTRAN Code embodying a technique for the analysis of process plant dynamics. As such, it is essentially a tool for the integration of sets of first order ordinary differential equations, either linear or non-linear; special provision is made for the inclusion of time-delayed variables in the mathematical model of the plant. The method of integration is new and is centred on a stable multistep predictor-corrector algorithm devised by the late Mr. F.G. Chapman, of the UKAEA, Winfrith. The theory on which the Code is based and detailed rules for using it are described in Parts I and II respectively. (author)

  20. Extended rate equations

    International Nuclear Information System (INIS)

    Shore, B.W.

    1981-01-01

    The equations of motion are discussed which describe time dependent population flows in an N-level system, reviewing the relationship between incoherent (rate) equations, coherent (Schrodinger) equations, and more general partially coherent (Bloch) equations. Approximations are discussed which replace the elaborate Bloch equations by simpler rate equations whose coefficients incorporate long-time consequences of coherence

  1. Improved inhalation technology for setting safe exposure levels for workplace chemicals

    Science.gov (United States)

    Stuart, Bruce O.

    1993-01-01

    Threshold Limit Values recommended as allowable air concentrations of a chemical in the workplace are often based upon a no-observable-effect-level (NOEL) determined by experimental inhalation studies using rodents. A 'safe level' for human exposure must then be estimated by the use of generalized safety factors in attempts to extrapolate from experimental rodents to man. The recent development of chemical-specific physiologically-based toxicokinetics makes use of measured physiological, biochemical, and metabolic parameters to construct a validated model that is able to 'scale-up' rodent response data to predict the behavior of the chemical in man. This procedure is made possible by recent advances in personal computer software and the emergence of appropriate biological data, and provides an analytical tool for much more reliable risk evaluation and airborne chemical exposure level setting for humans.

  2. Integral equations

    CERN Document Server

    Moiseiwitsch, B L

    2005-01-01

    Two distinct but related approaches hold the solutions to many mathematical problems--the forms of expression known as differential and integral equations. The method employed by the integral equation approach specifically includes the boundary conditions, which confers a valuable advantage. In addition, the integral equation approach leads naturally to the solution of the problem--under suitable conditions--in the form of an infinite series.Geared toward upper-level undergraduate students, this text focuses chiefly upon linear integral equations. It begins with a straightforward account, acco

  3. Setting ozone critical levels for protecting horticultural Mediterranean crops: Case study of tomato

    International Nuclear Information System (INIS)

    González-Fernández, I.; Calvo, E.; Gerosa, G.; Bermejo, V.; Marzuoli, R.; Calatayud, V.; Alonso, R.

    2014-01-01

    Seven experiments carried out in Italy and Spain have been used to parameterising a stomatal conductance model and establishing exposure– and dose–response relationships for yield and quality of tomato with the main goal of setting O 3 critical levels (CLe). CLe with confidence intervals, between brackets, were set at an accumulated hourly O 3 exposure over 40 nl l −1 , AOT40 = 8.4 (1.2, 15.6) ppm h and a phytotoxic ozone dose above a threshold of 6 nmol m −2 s −1 , POD6 = 2.7 (0.8, 4.6) mmol m −2 for yield and AOT40 = 18.7 (8.5, 28.8) ppm h and POD6 = 4.1 (2.0, 6.2) mmol m −2 for quality, both indices performing equally well. CLe confidence intervals provide information on the quality of the dataset and should be included in future calculations of O 3 CLe for improving current methodologies. These CLe, derived for sensitive tomato cultivars, should not be applied for quantifying O 3 -induced losses at the risk of making important overestimations of the economical losses associated with O 3 pollution. -- Highlights: • Seven independent experiments from Italy and Spain were analysed. • O 3 critical levels are proposed for the protection of summer horticultural crops. • Exposure- and flux-based O 3 indices performed equally well. • Confidence intervals of the new O 3 critical levels are calculated. • A new method to estimate the degree risk of O 3 damage is proposed. -- Critical levels for tomato yield were set at AOT40 = 8.4 ppm h and POD6 = 2.7 mmol m −2 and confidence intervals should be used for improving O 3 risk assessment

  4. On existence solutions and solution sets of differential equations and differential inclusions with delay in Banach spaces

    Directory of Open Access Journals (Sweden)

    A.M. Gomaa

    2012-07-01

    (Qx·(t∈A(tx(t+Fd(t,θtx,t∈[0,T],x=C,on[-d,0], where Fd : [0,T] × CE([−d,0] → Pfc(E, Pfc(E is the set of all nonempty closed convex subsets of E while θt : CE([−d,t] → CE([−d,0] defined by θtx(s = x(t + s ∀ x ∈ CE([−d,t], ∀s ∈ [−d,0] and {A(t : 0 ⩽ t ⩽ b} is a family of densely defined closed linear operators generating a continuous evolution operator S(t,s.

  5. Nurses' comfort level with spiritual assessment: a study among nurses working in diverse healthcare settings.

    Science.gov (United States)

    Cone, Pamela H; Giske, Tove

    2017-10-01

    To gain knowledge about nurses' comfort level in assessing spiritual matters and to learn what questions nurses use in practice related to spiritual assessment. Spirituality is important in holistic nursing care; however, nurses report feeling uncomfortable and ill-prepared to address this domain with patients. Education is reported to impact nurses' ability to engage in spiritual care. This cross-sectional exploratory survey reports on a mixed-method study examining how comfortable nurses are with spiritual assessment. In 2014, a 21-item survey with 10 demographic variables and three open-ended questions were distributed to Norwegian nurses working in diverse care settings with 172 nurse responses (72 % response rate). SPSS was used to analyse quantitative data; thematic analysis examined the open-ended questions. Norwegian nurses reported a high level of comfort with most questions even though spirituality is seen as private. Nurses with some preparation or experience in spiritual care were most comfortable assessing spirituality. Statistically significant correlations were found between the nurses' comfort level with spiritual assessment and their preparedness and sense of the importance of spiritual assessment. How well-prepared nurses felt was related to years of experience, degree of spirituality and religiosity, and importance of spiritual assessment. Many nurses are poorly prepared for spiritual assessment and care among patients in diverse care settings; educational preparation increases their comfort level with facilitating such care. Nurses who feel well prepared with spirituality feel more comfortable with the spiritual domain. By fostering a culture where patients' spirituality is discussed and reflected upon in everyday practice and in continued education, nurses' sense of preparedness, and thus their level of comfort, can increase. Clinical supervision and interprofessional collaboration with hospital chaplains and/or other spiritual leaders can

  6. Segmentation of teeth in CT volumetric dataset by panoramic projection and variational level set

    International Nuclear Information System (INIS)

    Hosntalab, Mohammad; Aghaeizadeh Zoroofi, Reza; Abbaspour Tehrani-Fard, Ali; Shirani, Gholamreza

    2008-01-01

    Quantification of teeth is of clinical importance for various computer assisted procedures such as dental implant, orthodontic planning, face, jaw and cosmetic surgeries. In this regard, segmentation is a major step. In this paper, we propose a method for segmentation of teeth in volumetric computed tomography (CT) data using panoramic re-sampling of the dataset in the coronal view and variational level set. The proposed method consists of five steps as follows: first, we extract a mask in a CT images using Otsu thresholding. Second, the teeth are segmented from other bony tissues by utilizing anatomical knowledge of teeth in the jaws. Third, the proposed method is followed by estimating the arc of the upper and lower jaws and panoramic re-sampling of the dataset. Separation of upper and lower jaws and initial segmentation of teeth are performed by employing the horizontal and vertical projections of the panoramic dataset, respectively. Based the above mentioned procedures an initial mask for each tooth is obtained. Finally, we utilize the initial mask of teeth and apply a Variational level set to refine initial teeth boundaries to final contours. The proposed algorithm was evaluated in the presence of 30 multi-slice CT datasets including 3,600 images. Experimental results reveal the effectiveness of the proposed method. In the proposed algorithm, the variational level set technique was utilized to trace the contour of the teeth. In view of the fact that, this technique is based on the characteristic of the overall region of the teeth image, it is possible to extract a very smooth and accurate tooth contour using this technique. In the presence of the available datasets, the proposed technique was successful in teeth segmentation compared to previous techniques. (orig.)

  7. Segmentation of teeth in CT volumetric dataset by panoramic projection and variational level set

    Energy Technology Data Exchange (ETDEWEB)

    Hosntalab, Mohammad [Islamic Azad University, Faculty of Engineering, Science and Research Branch, Tehran (Iran); Aghaeizadeh Zoroofi, Reza [University of Tehran, Control and Intelligent Processing Center of Excellence, School of Electrical and Computer Engineering, College of Engineering, Tehran (Iran); Abbaspour Tehrani-Fard, Ali [Islamic Azad University, Faculty of Engineering, Science and Research Branch, Tehran (Iran); Sharif University of Technology, Department of Electrical Engineering, Tehran (Iran); Shirani, Gholamreza [Faculty of Dentistry Medical Science of Tehran University, Oral and Maxillofacial Surgery Department, Tehran (Iran)

    2008-09-15

    Quantification of teeth is of clinical importance for various computer assisted procedures such as dental implant, orthodontic planning, face, jaw and cosmetic surgeries. In this regard, segmentation is a major step. In this paper, we propose a method for segmentation of teeth in volumetric computed tomography (CT) data using panoramic re-sampling of the dataset in the coronal view and variational level set. The proposed method consists of five steps as follows: first, we extract a mask in a CT images using Otsu thresholding. Second, the teeth are segmented from other bony tissues by utilizing anatomical knowledge of teeth in the jaws. Third, the proposed method is followed by estimating the arc of the upper and lower jaws and panoramic re-sampling of the dataset. Separation of upper and lower jaws and initial segmentation of teeth are performed by employing the horizontal and vertical projections of the panoramic dataset, respectively. Based the above mentioned procedures an initial mask for each tooth is obtained. Finally, we utilize the initial mask of teeth and apply a Variational level set to refine initial teeth boundaries to final contours. The proposed algorithm was evaluated in the presence of 30 multi-slice CT datasets including 3,600 images. Experimental results reveal the effectiveness of the proposed method. In the proposed algorithm, the variational level set technique was utilized to trace the contour of the teeth. In view of the fact that, this technique is based on the characteristic of the overall region of the teeth image, it is possible to extract a very smooth and accurate tooth contour using this technique. In the presence of the available datasets, the proposed technique was successful in teeth segmentation compared to previous techniques. (orig.)

  8. Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material

    DEFF Research Database (Denmark)

    Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders

    2013-01-01

    . A level set-based topology optimization method incorporating a fictitious interface energy is used to find optimized configurations of the ferrite material. The numerical results demonstrate that the optimization successfully found an appropriate ferrite configuration that functions as an electromagnetic......This paper presents a structural optimization method for the design of an electromagnetic cloak made of ferrite material. Ferrite materials exhibit a frequency-dependent degree of permeability, due to a magnetic resonance phenomenon that can be altered by changing the magnitude of an externally...

  9. A multilevel, level-set method for optimizing eigenvalues in shape design problems

    International Nuclear Information System (INIS)

    Haber, E.

    2004-01-01

    In this paper, we consider optimal design problems that involve shape optimization. The goal is to determine the shape of a certain structure such that it is either as rigid or as soft as possible. To achieve this goal we combine two new ideas for an efficient solution of the problem. First, we replace the eigenvalue problem with an approximation by using inverse iteration. Second, we use a level set method but rather than propagating the front we use constrained optimization methods combined with multilevel continuation techniques. Combining these two ideas we obtain a robust and rapid method for the solution of the optimal design problem

  10. Modeling Restrained Shrinkage Induced Cracking in Concrete Rings Using the Thick Level Set Approach

    Directory of Open Access Journals (Sweden)

    Rebecca Nakhoul

    2018-03-01

    Full Text Available Modeling restrained shrinkage-induced damage and cracking in concrete is addressed herein. The novel Thick Level Set (TLS damage growth and crack propagation model is used and adapted by introducing shrinkage contribution into the formulation. The TLS capacity to predict damage evolution, crack initiation and growth triggered by restrained shrinkage in absence of external loads is evaluated. A study dealing with shrinkage-induced cracking in elliptical concrete rings is presented herein. Key results such as the effect of rings oblateness on stress distribution and critical shrinkage strain needed to initiate damage are highlighted. In addition, crack positions are compared to those observed in experiments and are found satisfactory.

  11. Microwave imaging of dielectric cylinder using level set method and conjugate gradient algorithm

    International Nuclear Information System (INIS)

    Grayaa, K.; Bouzidi, A.; Aguili, T.

    2011-01-01

    In this paper, we propose a computational method for microwave imaging cylinder and dielectric object, based on combining level set technique and the conjugate gradient algorithm. By measuring the scattered field, we tried to retrieve the shape, localisation and the permittivity of the object. The forward problem is solved by the moment method, while the inverse problem is reformulate in an optimization one and is solved by the proposed scheme. It found that the proposed method is able to give good reconstruction quality in terms of the reconstructed shape and permittivity.

  12. A Variational Level Set Approach Based on Local Entropy for Image Segmentation and Bias Field Correction.

    Science.gov (United States)

    Tang, Jian; Jiang, Xiaoliang

    2017-01-01

    Image segmentation has always been a considerable challenge in image analysis and understanding due to the intensity inhomogeneity, which is also commonly known as bias field. In this paper, we present a novel region-based approach based on local entropy for segmenting images and estimating the bias field simultaneously. Firstly, a local Gaussian distribution fitting (LGDF) energy function is defined as a weighted energy integral, where the weight is local entropy derived from a grey level distribution of local image. The means of this objective function have a multiplicative factor that estimates the bias field in the transformed domain. Then, the bias field prior is fully used. Therefore, our model can estimate the bias field more accurately. Finally, minimization of this energy function with a level set regularization term, image segmentation, and bias field estimation can be achieved. Experiments on images of various modalities demonstrated the superior performance of the proposed method when compared with other state-of-the-art approaches.

  13. Implications of sea-level rise in a modern carbonate ramp setting

    Science.gov (United States)

    Lokier, Stephen W.; Court, Wesley M.; Onuma, Takumi; Paul, Andreas

    2018-03-01

    This study addresses a gap in our understanding of the effects of sea-level rise on the sedimentary systems and morphological development of recent and ancient carbonate ramp settings. Many ancient carbonate sequences are interpreted as having been deposited in carbonate ramp settings. These settings are poorly-represented in the Recent. The study documents the present-day transgressive flooding of the Abu Dhabi coastline at the southern shoreline of the Arabian/Persian Gulf, a carbonate ramp depositional system that is widely employed as a Recent analogue for numerous ancient carbonate systems. Fourteen years of field-based observations are integrated with historical and recent high-resolution satellite imagery in order to document and assess the onset of flooding. Predicted rates of transgression (i.e. landward movement of the shoreline) of 2.5 m yr- 1 (± 0.2 m yr- 1) based on global sea-level rise alone were far exceeded by the flooding rate calculated from the back-stepping of coastal features (10-29 m yr- 1). This discrepancy results from the dynamic nature of the flooding with increased water depth exposing the coastline to increased erosion and, thereby, enhancing back-stepping. A non-accretionary transgressive shoreline trajectory results from relatively rapid sea-level rise coupled with a low-angle ramp geometry and a paucity of sediments. The flooding is represented by the landward migration of facies belts, a range of erosive features and the onset of bioturbation. Employing Intergovernmental Panel on Climate Change (Church et al., 2013) predictions for 21st century sea-level rise, and allowing for the post-flooding lag time that is typical for the start-up of carbonate factories, it is calculated that the coastline will continue to retrograde for the foreseeable future. Total passive flooding (without considering feedback in the modification of the shoreline) by the year 2100 is calculated to likely be between 340 and 571 m with a flooding rate of 3

  14. Robust space-time extraction of ventricular surface evolution using multiphase level sets

    Science.gov (United States)

    Drapaca, Corina S.; Cardenas, Valerie; Studholme, Colin

    2004-05-01

    This paper focuses on the problem of accurately extracting the CSF-tissue boundary, particularly around the ventricular surface, from serial structural MRI of the brain acquired in imaging studies of aging and dementia. This is a challenging problem because of the common occurrence of peri-ventricular lesions which locally alter the appearance of white matter. We examine a level set approach which evolves a four dimensional description of the ventricular surface over time. This has the advantage of allowing constraints on the contour in the temporal dimension, improving the consistency of the extracted object over time. We follow the approach proposed by Chan and Vese which is based on the Mumford and Shah model and implemented using the Osher and Sethian level set method. We have extended this to the 4 dimensional case to propagate a 4D contour toward the tissue boundaries through the evolution of a 5D implicit function. For convergence we use region-based information provided by the image rather than the gradient of the image. This is adapted to allow intensity contrast changes between time frames in the MRI sequence. Results on time sequences of 3D brain MR images are presented and discussed.

  15. An improved level set method for brain MR images segmentation and bias correction.

    Science.gov (United States)

    Chen, Yunjie; Zhang, Jianwei; Macione, Jim

    2009-10-01

    Intensity inhomogeneities cause considerable difficulty in the quantitative analysis of magnetic resonance (MR) images. Thus, bias field estimation is a necessary step before quantitative analysis of MR data can be undertaken. This paper presents a variational level set approach to bias correction and segmentation for images with intensity inhomogeneities. Our method is based on an observation that intensities in a relatively small local region are separable, despite of the inseparability of the intensities in the whole image caused by the overall intensity inhomogeneity. We first define a localized K-means-type clustering objective function for image intensities in a neighborhood around each point. The cluster centers in this objective function have a multiplicative factor that estimates the bias within the neighborhood. The objective function is then integrated over the entire domain to define the data term into the level set framework. Our method is able to capture bias of quite general profiles. Moreover, it is robust to initialization, and thereby allows fully automated applications. The proposed method has been used for images of various modalities with promising results.

  16. Topology optimization in acoustics and elasto-acoustics via a level-set method

    Science.gov (United States)

    Desai, J.; Faure, A.; Michailidis, G.; Parry, G.; Estevez, R.

    2018-04-01

    Optimizing the shape and topology (S&T) of structures to improve their acoustic performance is quite challenging. The exact position of the structural boundary is usually of critical importance, which dictates the use of geometric methods for topology optimization instead of standard density approaches. The goal of the present work is to investigate different possibilities for handling topology optimization problems in acoustics and elasto-acoustics via a level-set method. From a theoretical point of view, we detail two equivalent ways to perform the derivation of surface-dependent terms and propose a smoothing technique for treating problems of boundary conditions optimization. In the numerical part, we examine the importance of the surface-dependent term in the shape derivative, neglected in previous studies found in the literature, on the optimal designs. Moreover, we test different mesh adaptation choices, as well as technical details related to the implicit surface definition in the level-set approach. We present results in two and three-space dimensions.

  17. A mass conserving level set method for detailed numerical simulation of liquid atomization

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Kun; Shao, Changxiao [State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027 (China); Yang, Yue [State Key Laboratory of Turbulence and Complex Systems, Peking University, Beijing 100871 (China); Fan, Jianren, E-mail: fanjr@zju.edu.cn [State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027 (China)

    2015-10-01

    An improved mass conserving level set method for detailed numerical simulations of liquid atomization is developed to address the issue of mass loss in the existing level set method. This method introduces a mass remedy procedure based on the local curvature at the interface, and in principle, can ensure the absolute mass conservation of the liquid phase in the computational domain. Three benchmark cases, including Zalesak's disk, a drop deforming in a vortex field, and the binary drop head-on collision, are simulated to validate the present method, and the excellent agreement with exact solutions or experimental results is achieved. It is shown that the present method is able to capture the complex interface with second-order accuracy and negligible additional computational cost. The present method is then applied to study more complex flows, such as a drop impacting on a liquid film and the swirling liquid sheet atomization, which again, demonstrates the advantages of mass conservation and the capability to represent the interface accurately.

  18. On the Relationship between Variational Level Set-Based and SOM-Based Active Contours

    Science.gov (United States)

    Abdelsamea, Mohammed M.; Gnecco, Giorgio; Gaber, Mohamed Medhat; Elyan, Eyad

    2015-01-01

    Most Active Contour Models (ACMs) deal with the image segmentation problem as a functional optimization problem, as they work on dividing an image into several regions by optimizing a suitable functional. Among ACMs, variational level set methods have been used to build an active contour with the aim of modeling arbitrarily complex shapes. Moreover, they can handle also topological changes of the contours. Self-Organizing Maps (SOMs) have attracted the attention of many computer vision scientists, particularly in modeling an active contour based on the idea of utilizing the prototypes (weights) of a SOM to control the evolution of the contour. SOM-based models have been proposed in general with the aim of exploiting the specific ability of SOMs to learn the edge-map information via their topology preservation property and overcoming some drawbacks of other ACMs, such as trapping into local minima of the image energy functional to be minimized in such models. In this survey, we illustrate the main concepts of variational level set-based ACMs, SOM-based ACMs, and their relationship and review in a comprehensive fashion the development of their state-of-the-art models from a machine learning perspective, with a focus on their strengths and weaknesses. PMID:25960736

  19. Emotional Intelligence, Motivational Climate and Levels of Anxiety in Athletes from Different Categories of Sports: Analysis through Structural Equations

    Science.gov (United States)

    López-Gutiérrez, Carlos Javier; Zafra-Santos, Edson

    2018-01-01

    (1) Background: Psychological factors can strongly affect the athletes’ performance. Therefore, currently the role of the sports psychologist is particularly relevant, being in charge of training the athlete’s psychological factors. This study aims at analysing the connections between motivational climate in sport, anxiety and emotional intelligence depending on the type of sport practised (individual/team) by means of a multigroup structural equations analysis. (2) 372 semi-professional Spanish athletes took part in this investigation, analysing motivational climate (PMCSQ-2), emotional intelligence (SSRI) and levels of anxiety (STAI). A model of multigroup structural equations was carried out which fitted accordingly (χ2 = 586.77; df = 6.37; p sports. The most influential indicator in ego oriented climate is intra-group rivalry, exerting greater influence in individual sports. For task-oriented climate the strongest indicator is having an important role in individual sports, while in team sports it is cooperative learning. Emotional intelligence dimensions correlate more strongly in team sports than in individual sports. In addition, there was a negative and indirect relation between task oriented climate and trait-anxiety in both categories of sports. (4) Conclusions: This study shows how the task-oriented motivational climate or certain levels of emotional intelligence can act preventively in the face of anxiety states in athletes. Therefore, the development of these psychological factors could prevent anxiety states and improve performance in athletes. PMID:29724008

  20. Determination of a basic set of Eigen-functions and of the corresponding norm in the case of the one-velocity integral differential Boltzmann equation in spherical geometry

    International Nuclear Information System (INIS)

    Lafore, P.

    1965-01-01

    The object of the present work is to draw up a basic set of orthogonal eigenfunctions; resolution of the one-velocity integral-differential Boltzmann equation; this in the case of a spherical geometry system. (author) [fr

  1. Reservoir characterisation by a binary level set method and adaptive multiscale estimation

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Lars Kristian

    2006-01-15

    The main focus of this work is on estimation of the absolute permeability as a solution of an inverse problem. We have both considered a single-phase and a two-phase flow model. Two novel approaches have been introduced and tested numerical for solving the inverse problems. The first approach is a multi scale zonation technique which is treated in Paper A. The purpose of the work in this paper is to find a coarse scale solution based on production data from wells. In the suggested approach, the robustness of an already developed method, the adaptive multi scale estimation (AME), has been improved by utilising information from several candidate solutions generated by a stochastic optimizer. The new approach also suggests a way of combining a stochastic and a gradient search method, which in general is a problematic issue. The second approach is a piecewise constant level set approach and is applied in Paper B, C, D and E. Paper B considers the stationary single-phase problem, while Paper C, D and E use a two-phase flow model. In the two-phase flow problem we have utilised information from both production data in wells and spatially distributed data gathered from seismic surveys. Due to the higher content of information provided by the spatially distributed data, we search solutions on a slightly finer scale than one typically does with only production data included. The applied level set method is suitable for reconstruction of fields with a supposed known facies-type of solution. That is, the solution should be close to piecewise constant. This information is utilised through a strong restriction of the number of constant levels in the estimate. On the other hand, the flexibility in the geometries of the zones is much larger for this method than in a typical zonation approach, for example the multi scale approach applied in Paper A. In all these papers, the numerical studies are done on synthetic data sets. An advantage of synthetic data studies is that the true

  2. CT Findings of Disease with Elevated Serum D-Dimer Levels in an Emergency Room Setting

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Ji Youn; Kwon, Woo Cheol; Kim, Young Ju [Dept. of Radiology, Wonju Christian Hospital, Yensei University Wonju College of Medicine, Wonju (Korea, Republic of)

    2012-01-15

    Pulmonary embolism and deep vein thrombosis are the leading causes of elevated serum D-dimer levels in the emergency room. Although D-dimer is a useful screening test because of its high sensitivity and negative predictive value, it has a low specificity. In addition, D-dimer can be elevated in various diseases. Therefore, information on the various diseases with elevated D-dimer levels and their radiologic findings may allow for accurate diagnosis and proper management. Herein, we report the CT findings of various diseases with elevated D-dimer levels in an emergency room setting, including an intravascular contrast filling defect with associated findings in a venous thromboembolism, fracture with soft tissue swelling and hematoma formation in a trauma patient, enlargement with contrast enhancement in the infected organ of a patient, coronary artery stenosis with a perfusion defect of the myocardium in a patient with acute myocardial infarction, high density of acute thrombus in a cerebral vessel with a low density of affected brain parenchyma in an acute cerebral infarction, intimal flap with two separated lumens in a case of aortic dissection, organ involvement of malignancy in a cancer patient, and atrophy of a liver with a dilated portal vein and associated findings.

  3. Glycated albumin is set lower in relation to plasma glucose levels in patients with Cushing's syndrome.

    Science.gov (United States)

    Kitamura, Tetsuhiro; Otsuki, Michio; Tamada, Daisuke; Tabuchi, Yukiko; Mukai, Kosuke; Morita, Shinya; Kasayama, Soji; Shimomura, Iichiro; Koga, Masafumi

    2013-09-23

    Glycated albumin (GA) is an indicator of glycemic control, which has some specific characters in comparison with HbA1c. Since glucocorticoids (GC) promote protein catabolism including serum albumin, GC excess state would influence GA levels. We therefore investigated GA levels in patients with Cushing's syndrome. We studied 16 patients with Cushing's syndrome (8 patients had diabetes mellitus and the remaining 8 patients were non-diabetic). Thirty-two patients with type 2 diabetes mellitus and 32 non-diabetic subjects matched for age, sex and BMI were used as controls. In the patients with Cushing's syndrome, GA was significantly correlated with HbA1c, but the regression line shifted downwards as compared with the controls. The GA/HbA1c ratio in the patients with Cushing's syndrome was also significantly lower than the controls. HbA1c in the non-diabetic patients with Cushing's syndrome was not different from the non-diabetic controls, whereas GA was significantly lower. In 7 patients with Cushing's syndrome who performed self-monitoring of blood glucose, the measured HbA1c was matched with HbA1c estimated from mean blood glucose, whereas the measured GA was significantly lower than the estimated GA. We clarified that GA is set lower in relation to plasma glucose levels in patients with Cushing's syndrome. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. CT Findings of Disease with Elevated Serum D-Dimer Levels in an Emergency Room Setting

    International Nuclear Information System (INIS)

    Choi, Ji Youn; Kwon, Woo Cheol; Kim, Young Ju

    2012-01-01

    Pulmonary embolism and deep vein thrombosis are the leading causes of elevated serum D-dimer levels in the emergency room. Although D-dimer is a useful screening test because of its high sensitivity and negative predictive value, it has a low specificity. In addition, D-dimer can be elevated in various diseases. Therefore, information on the various diseases with elevated D-dimer levels and their radiologic findings may allow for accurate diagnosis and proper management. Herein, we report the CT findings of various diseases with elevated D-dimer levels in an emergency room setting, including an intravascular contrast filling defect with associated findings in a venous thromboembolism, fracture with soft tissue swelling and hematoma formation in a trauma patient, enlargement with contrast enhancement in the infected organ of a patient, coronary artery stenosis with a perfusion defect of the myocardium in a patient with acute myocardial infarction, high density of acute thrombus in a cerebral vessel with a low density of affected brain parenchyma in an acute cerebral infarction, intimal flap with two separated lumens in a case of aortic dissection, organ involvement of malignancy in a cancer patient, and atrophy of a liver with a dilated portal vein and associated findings.

  5. Predictive Control of the Blood Glucose Level in Type I Diabetic Patient Using Delay Differential Equation Wang Model.

    Science.gov (United States)

    Esna-Ashari, Mojgan; Zekri, Maryam; Askari, Masood; Khalili, Noushin

    2017-01-01

    Because of increasing risk of diabetes, the measurement along with control of blood sugar has been of great importance in recent decades. In type I diabetes, because of the lack of insulin secretion, the cells cannot absorb glucose leading to low level of glucose. To control blood glucose (BG), the insulin must be injected to the body. This paper proposes a method for BG level regulation in type I diabetes. The control strategy is based on nonlinear model predictive control. The aim of the proposed controller optimized with genetics algorithms is to measure BG level each time and predict it for the next time interval. This merit causes a less amount of control effort, which is the rate of insulin delivered to the patient body. Consequently, this method can decrease the risk of hypoglycemia, a lethal phenomenon in regulating BG level in diabetes caused by a low BG level. Two delay differential equation models, namely Wang model and Enhanced Wang model, are applied as controller model and plant, respectively. The simulation results exhibit an acceptable performance of the proposed controller in meal disturbance rejection and robustness against parameter changes. As a result, if the nutrition of the person decreases instantly, the hypoglycemia will not happen. Furthermore, comparing this method with other works, it was shown that the new method outperforms previous studies.

  6. Calculating the true level of predictors significance when carrying out the procedure of regression equation specification

    Directory of Open Access Journals (Sweden)

    Nikita A. Moiseev

    2017-01-01

    Full Text Available The paper is devoted to a new randomization method that yields unbiased adjustments of p-values for linear regression models predictors by incorporating the number of potential explanatory variables, their variance-covariance matrix and its uncertainty, based on the number of observations. This adjustment helps to control type I errors in scientific studies, significantly decreasing the number of publications that report false relations to be authentic ones. Comparative analysis with such existing methods as Bonferroni correction and Shehata and White adjustments explicitly shows their imperfections, especially in case when the number of observations and the number of potential explanatory variables are approximately equal. Also during the comparative analysis it was shown that when the variance-covariance matrix of a set of potential predictors is diagonal, i.e. the data are independent, the proposed simple correction is the best and easiest way to implement the method to obtain unbiased corrections of traditional p-values. However, in the case of the presence of strongly correlated data, a simple correction overestimates the true pvalues, which can lead to type II errors. It was also found that the corrected p-values depend on the number of observations, the number of potential explanatory variables and the sample variance-covariance matrix. For example, if there are only two potential explanatory variables competing for one position in the regression model, then if they are weakly correlated, the corrected p-value will be lower than when the number of observations is smaller and vice versa; if the data are highly correlated, the case with a larger number of observations will show a lower corrected p-value. With increasing correlation, all corrections, regardless of the number of observations, tend to the original p-value. This phenomenon is easy to explain: as correlation coefficient tends to one, two variables almost linearly depend on each

  7. Level-set segmentation of pulmonary nodules in megavolt electronic portal images using a CT prior

    International Nuclear Information System (INIS)

    Schildkraut, J. S.; Prosser, N.; Savakis, A.; Gomez, J.; Nazareth, D.; Singh, A. K.; Malhotra, H. K.

    2010-01-01

    Purpose: Pulmonary nodules present unique problems during radiation treatment due to nodule position uncertainty that is caused by respiration. The radiation field has to be enlarged to account for nodule motion during treatment. The purpose of this work is to provide a method of locating a pulmonary nodule in a megavolt portal image that can be used to reduce the internal target volume (ITV) during radiation therapy. A reduction in the ITV would result in a decrease in radiation toxicity to healthy tissue. Methods: Eight patients with nonsmall cell lung cancer were used in this study. CT scans that include the pulmonary nodule were captured with a GE Healthcare LightSpeed RT 16 scanner. Megavolt portal images were acquired with a Varian Trilogy unit equipped with an AS1000 electronic portal imaging device. The nodule localization method uses grayscale morphological filtering and level-set segmentation with a prior. The treatment-time portion of the algorithm is implemented on a graphical processing unit. Results: The method was retrospectively tested on eight cases that include a total of 151 megavolt portal image frames. The method reduced the nodule position uncertainty by an average of 40% for seven out of the eight cases. The treatment phase portion of the method has a subsecond execution time that makes it suitable for near-real-time nodule localization. Conclusions: A method was developed to localize a pulmonary nodule in a megavolt portal image. The method uses the characteristics of the nodule in a prior CT scan to enhance the nodule in the portal image and to identify the nodule region by level-set segmentation. In a retrospective study, the method reduced the nodule position uncertainty by an average of 40% for seven out of the eight cases studied.

  8. Level-set dynamics and mixing efficiency of passive and active scalars in DNS and LES of turbulent mixing layers

    NARCIS (Netherlands)

    Geurts, Bernard J.; Vreman, Bert; Kuerten, Hans; Luo, Kai H.

    2001-01-01

    The mixing efficiency in a turbulent mixing layer is quantified by monitoring the surface-area of level-sets of scalar fields. The Laplace transform is applied to numerically calculate integrals over arbitrary level-sets. The analysis includes both direct and large-eddy simulation and is used to

  9. Characterization of mammographic masses based on level set segmentation with new image features and patient information

    International Nuclear Information System (INIS)

    Shi Jiazheng; Sahiner, Berkman; Chan Heangping; Ge Jun; Hadjiiski, Lubomir; Helvie, Mark A.; Nees, Alexis; Wu Yita; Wei Jun; Zhou Chuan; Zhang Yiheng; Cui Jing

    2008-01-01

    Computer-aided diagnosis (CAD) for characterization of mammographic masses as malignant or benign has the potential to assist radiologists in reducing the biopsy rate without increasing false negatives. The purpose of this study was to develop an automated method for mammographic mass segmentation and explore new image based features in combination with patient information in order to improve the performance of mass characterization. The authors' previous CAD system, which used the active contour segmentation, and morphological, textural, and spiculation features, has achieved promising results in mass characterization. The new CAD system is based on the level set method and includes two new types of image features related to the presence of microcalcifications with the mass and abruptness of the mass margin, and patient age. A linear discriminant analysis (LDA) classifier with stepwise feature selection was used to merge the extracted features into a classification score. The classification accuracy was evaluated using the area under the receiver operating characteristic curve. The authors' primary data set consisted of 427 biopsy-proven masses (200 malignant and 227 benign) in 909 regions of interest (ROIs) (451 malignant and 458 benign) from multiple mammographic views. Leave-one-case-out resampling was used for training and testing. The new CAD system based on the level set segmentation and the new mammographic feature space achieved a view-based A z value of 0.83±0.01. The improvement compared to the previous CAD system was statistically significant (p=0.02). When patient age was included in the new CAD system, view-based and case-based A z values were 0.85±0.01 and 0.87±0.02, respectively. The study also demonstrated the consistency of the newly developed CAD system by evaluating the statistics of the weights of the LDA classifiers in leave-one-case-out classification. Finally, an independent test on the publicly available digital database for screening

  10. Cooperative Fuzzy Games Approach to Setting Target Levels of ECs in Quality Function Deployment

    Directory of Open Access Journals (Sweden)

    Zhihui Yang

    2014-01-01

    Full Text Available Quality function deployment (QFD can provide a means of translating customer requirements (CRs into engineering characteristics (ECs for each stage of product development and production. The main objective of QFD-based product planning is to determine the target levels of ECs for a new product or service. QFD is a breakthrough tool which can effectively reduce the gap between CRs and a new product/service. Even though there are conflicts among some ECs, the objective of developing new product is to maximize the overall customer satisfaction. Therefore, there may be room for cooperation among ECs. A cooperative game framework combined with fuzzy set theory is developed to determine the target levels of the ECs in QFD. The key to develop the model is the formulation of the bargaining function. In the proposed methodology, the players are viewed as the membership functions of ECs to formulate the bargaining function. The solution for the proposed model is Pareto-optimal. An illustrated example is cited to demonstrate the application and performance of the proposed approach.

  11. A hybrid interface tracking - level set technique for multiphase flow with soluble surfactant

    Science.gov (United States)

    Shin, Seungwon; Chergui, Jalel; Juric, Damir; Kahouadji, Lyes; Matar, Omar K.; Craster, Richard V.

    2018-04-01

    A formulation for soluble surfactant transport in multiphase flows recently presented by Muradoglu and Tryggvason (JCP 274 (2014) 737-757) [17] is adapted to the context of the Level Contour Reconstruction Method, LCRM, (Shin et al. IJNMF 60 (2009) 753-778, [8]) which is a hybrid method that combines the advantages of the Front-tracking and Level Set methods. Particularly close attention is paid to the formulation and numerical implementation of the surface gradients of surfactant concentration and surface tension. Various benchmark tests are performed to demonstrate the accuracy of different elements of the algorithm. To verify surfactant mass conservation, values for surfactant diffusion along the interface are compared with the exact solution for the problem of uniform expansion of a sphere. The numerical implementation of the discontinuous boundary condition for the source term in the bulk concentration is compared with the approximate solution. Surface tension forces are tested for Marangoni drop translation. Our numerical results for drop deformation in simple shear are compared with experiments and results from previous simulations. All benchmarking tests compare well with existing data thus providing confidence that the adapted LCRM formulation for surfactant advection and diffusion is accurate and effective in three-dimensional multiphase flows with a structured mesh. We also demonstrate that this approach applies easily to massively parallel simulations.

  12. Natural setting of Japanese islands and geologic disposal of high-level waste

    International Nuclear Information System (INIS)

    Koide, Hitoshi

    1991-01-01

    The Japanese islands are a combination of arcuate islands along boundaries between four major plates: Eurasia, North America, Pacific and Philippine Sea plates. The interaction among the four plates formed complex geological structures which are basically patchworks of small blocks of land and sea-floor sediments piled up by the subduction of oceanic plates along the margin of the Eurasia continent. Although frequent earthquakes and volcanic eruptions clearly indicate active crustal deformation, the distribution of active faults and volcanoes is localized regionally in the Japanese islands. Crustal displacement faster than 1 mm/year takes place only in restricted regions near plate boundaries or close to major active faults. Volcanic activity is absent in the region between the volcanic front and the subduction zone. The site selection is especially important in Japan. The scenarios for the long-term performance assessment of high-level waste disposal are discussed with special reference to the geological setting of Japan. The long-term prediction of tectonic disturbance, evaluation of faults and fractures in rocks and estimation of long-term water-rock interaction are key issues in the performance assessment of the high-level waste disposal in the Japanese islands. (author)

  13. Cooperative fuzzy games approach to setting target levels of ECs in quality function deployment.

    Science.gov (United States)

    Yang, Zhihui; Chen, Yizeng; Yin, Yunqiang

    2014-01-01

    Quality function deployment (QFD) can provide a means of translating customer requirements (CRs) into engineering characteristics (ECs) for each stage of product development and production. The main objective of QFD-based product planning is to determine the target levels of ECs for a new product or service. QFD is a breakthrough tool which can effectively reduce the gap between CRs and a new product/service. Even though there are conflicts among some ECs, the objective of developing new product is to maximize the overall customer satisfaction. Therefore, there may be room for cooperation among ECs. A cooperative game framework combined with fuzzy set theory is developed to determine the target levels of the ECs in QFD. The key to develop the model is the formulation of the bargaining function. In the proposed methodology, the players are viewed as the membership functions of ECs to formulate the bargaining function. The solution for the proposed model is Pareto-optimal. An illustrated example is cited to demonstrate the application and performance of the proposed approach.

  14. Electric Conductivity of Hot and Dense Quark Matter in a Magnetic Field with Landau Level Resummation via Kinetic Equations

    Science.gov (United States)

    Fukushima, Kenji; Hidaka, Yoshimasa

    2018-04-01

    We compute the electric conductivity of quark matter at finite temperature T and a quark chemical potential μ under a magnetic field B beyond the lowest Landau level approximation. The electric conductivity transverse to B is dominated by the Hall conductivity σH. For the longitudinal conductivity σ∥, we need to solve kinetic equations. Then, we numerically find that σ∥ has only a mild dependence on μ and the quark mass mq. Moreover, σ∥ first decreases and then linearly increases as a function of B , leading to an intermediate B region that looks consistent with the experimental signature for the chiral magnetic effect. We also point out that σ∥ at a nonzero B remains within the range of the lattice-QCD estimate at B =0 .

  15. Relationships between college settings and student alcohol use before, during and after events: a multi-level study.

    Science.gov (United States)

    Paschall, Mallie J; Saltz, Robert F

    2007-11-01

    We examined how alcohol risk is distributed based on college students' drinking before, during and after they go to certain settings. Students attending 14 California public universities (N=10,152) completed a web-based or mailed survey in the fall 2003 semester, which included questions about how many drinks they consumed before, during and after the last time they went to six settings/events: fraternity or sorority party, residence hall party, campus event (e.g. football game), off-campus party, bar/restaurant and outdoor setting (referent). Multi-level analyses were conducted in hierarchical linear modeling (HLM) to examine relationships between type of setting and level of alcohol use before, during and after going to the setting, and possible age and gender differences in these relationships. Drinking episodes (N=24,207) were level 1 units, students were level 2 units and colleges were level 3 units. The highest drinking levels were observed during all settings/events except campus events, with the highest number of drinks being consumed at off-campus parties, followed by residence hall and fraternity/sorority parties. The number of drinks consumed before a fraternity/sorority party was higher than other settings/events. Age group and gender differences in relationships between type of setting/event and 'before,''during' and 'after' drinking levels also were observed. For example, going to a bar/restaurant (relative to an outdoor setting) was positively associated with 'during' drinks among students of legal drinking age while no relationship was observed for underage students. Findings of this study indicate differences in the extent to which college settings are associated with student drinking levels before, during and after related events, and may have implications for intervention strategies targeting different types of settings.

  16. Generalized cost-effectiveness analysis for national-level priority-setting in the health sector

    Directory of Open Access Journals (Sweden)

    Edejer Tessa

    2003-12-01

    Full Text Available Abstract Cost-effectiveness analysis (CEA is potentially an important aid to public health decision-making but, with some notable exceptions, its use and impact at the level of individual countries is limited. A number of potential reasons may account for this, among them technical shortcomings associated with the generation of current economic evidence, political expediency, social preferences and systemic barriers to implementation. As a form of sectoral CEA, Generalized CEA sets out to overcome a number of these barriers to the appropriate use of cost-effectiveness information at the regional and country level. Its application via WHO-CHOICE provides a new economic evidence base, as well as underlying methodological developments, concerning the cost-effectiveness of a range of health interventions for leading causes of, and risk factors for, disease. The estimated sub-regional costs and effects of different interventions provided by WHO-CHOICE can readily be tailored to the specific context of individual countries, for example by adjustment to the quantity and unit prices of intervention inputs (costs or the coverage, efficacy and adherence rates of interventions (effectiveness. The potential usefulness of this information for health policy and planning is in assessing if current intervention strategies represent an efficient use of scarce resources, and which of the potential additional interventions that are not yet implemented, or not implemented fully, should be given priority on the grounds of cost-effectiveness. Health policy-makers and programme managers can use results from WHO-CHOICE as a valuable input into the planning and prioritization of services at national level, as well as a starting point for additional analyses of the trade-off between the efficiency of interventions in producing health and their impact on other key outcomes such as reducing inequalities and improving the health of the poor.

  17. Developments in functional equations and related topics

    CERN Document Server

    Ciepliński, Krzysztof; Rassias, Themistocles

    2017-01-01

    This book presents current research on Ulam stability for functional equations and inequalities. Contributions from renowned scientists emphasize fundamental and new results, methods and techniques. Detailed examples are given to theories to further understanding at the graduate level for students in mathematics, physics, and engineering. Key topics covered in this book include: Quasi means Approximate isometries Functional equations in hypergroups Stability of functional equations Fischer-Muszély equation Haar meager sets and Haar null sets Dynamical systems Functional equations in probability theory Stochastic convex ordering Dhombres functional equation Nonstandard analysis and Ulam stability This book is dedicated in memory of Staniłsaw Marcin Ulam, who posed the fundamental problem concerning approximate homomorphisms of groups in 1940; which has provided the stimulus for studies in the stability of functional equations and inequalities.

  18. Emotional Intelligence, Motivational Climate and Levels of Anxiety in Athletes from Different Categories of Sports: Analysis through Structural Equations

    Directory of Open Access Journals (Sweden)

    Manuel Castro-Sánchez

    2018-05-01

    Full Text Available (1 Background: Psychological factors can strongly affect the athletes’ performance. Therefore, currently the role of the sports psychologist is particularly relevant, being in charge of training the athlete’s psychological factors. This study aims at analysing the connections between motivational climate in sport, anxiety and emotional intelligence depending on the type of sport practised (individual/team by means of a multigroup structural equations analysis. (2 372 semi-professional Spanish athletes took part in this investigation, analysing motivational climate (PMCSQ-2, emotional intelligence (SSRI and levels of anxiety (STAI. A model of multigroup structural equations was carried out which fitted accordingly (χ2 = 586.77; df = 6.37; p < 0.001; Comparative Fit Index (CFI = 0.951; Normed Fit Index (NFI = 0.938; Incremental Fit Index (IFI = 0.947; Root Mean Square Error of Approximation (RMSEA = 0.069. (3 Results: A negative and direct connection has been found between ego oriented climate and task oriented climate, which is stronger and more differentiated in team sports. The most influential indicator in ego oriented climate is intra-group rivalry, exerting greater influence in individual sports. For task-oriented climate the strongest indicator is having an important role in individual sports, while in team sports it is cooperative learning. Emotional intelligence dimensions correlate more strongly in team sports than in individual sports. In addition, there was a negative and indirect relation between task oriented climate and trait-anxiety in both categories of sports. (4 Conclusions: This study shows how the task-oriented motivational climate or certain levels of emotional intelligence can act preventively in the face of anxiety states in athletes. Therefore, the development of these psychological factors could prevent anxiety states and improve performance in athletes.

  19. Transport coefficients and cross sections for electrons in water vapour: Comparison of cross section sets using an improved Boltzmann equation solution

    Science.gov (United States)

    Ness, K. F.; Robson, R. E.; Brunger, M. J.; White, R. D.

    2012-01-01

    This paper revisits the issues surrounding computation of electron transport properties in water vapour as a function of E/n0 (the ratio of the applied electric field to the water vapour number density) up to 1200 Td. We solve the Boltzmann equation using an improved version of the code of Ness and Robson [Phys. Rev. A 38, 1446 (1988)], facilitating the calculation of transport coefficients to a considerably higher degree of accuracy. This allows a correspondingly more discriminating test of the various electron-water vapour cross section sets proposed by a number of authors, which has become an important issue as such sets are now being applied to study electron driven processes in atmospheric phenomena [P. Thorn, L. Campbell, and M. Brunger, PMC Physics B 2, 1 (2009)] and in modeling charged particle tracks in matter [A. Munoz, F. Blanco, G. Garcia, P. A. Thorn, M. J. Brunger, J. P. Sullivan, and S. J. Buckman, Int. J. Mass Spectrom. 277, 175 (2008)].

  20. Home advantage in high-level volleyball varies according to set number.

    Science.gov (United States)

    Marcelino, Rui; Mesquita, Isabel; Palao Andrés, José Manuel; Sampaio, Jaime

    2009-01-01

    The aim of the present study was to identify the probability of winning each Volleyball set according to game location (home, away). Archival data was obtained from 275 sets in the 2005 Men's Senior World League and 65,949 actions were analysed. Set result (win, loss), game location (home, away), set number (first, second, third, fourth and fifth) and performance indicators (serve, reception, set, attack, dig and block) were the variables considered in this study. In a first moment, performance indicators were used in a logistic model of set result, by binary logistic regression analysis. After finding the adjusted logistic model, the log-odds of winning the set were analysed according to game location and set number. The results showed that winning a set is significantly related to performance indicators (Chisquare(18)=660.97, padvantage at the beginning of the game (first set) and in the two last sets of the game (fourth and fifth sets), probably due to facilities familiarity and crowd effects. Different game actions explain these advantages and showed that to win the first set is more important to take risk, through a better performance in the attack and block, and to win the final set is important to manage the risk through a better performance on the reception. These results may suggest intra-game variation in home advantage and can be most useful to better prepare and direct the competition. Key pointsHome teams always have more probability of winning the game than away teams.Home teams have higher performance in reception, set and attack in the total of the sets.The advantage of home teams is more pronounced at the beginning of the game (first set) and in two last sets of the game (fourth and fifth sets) suggesting intra-game variation in home advantage.Analysis by sets showed that home teams have a better performance in the attack and block in the first set and in the reception in the third and fifth sets.

  1. On the modeling of bubble evolution and transport using coupled level-set/CFD method

    International Nuclear Information System (INIS)

    Bartlomiej Wierzbicki; Steven P Antal; Michael Z Podowski

    2005-01-01

    Full text of publication follows: The ability to predict the shape of the gas/liquid/solid interfaces is important for various multiphase flow and heat transfer applications. Specific issues of interest to nuclear reactor thermal-hydraulics, include the evolution of the shape of bubbles attached to solid surfaces during nucleation, bubble surface interactions in complex geometries, etc. Additional problems, making the overall task even more complicated, are associated with the effect of material properties that may be significantly altered by the addition of minute amounts of impurities, such as surfactants or nano-particles. The present paper is concerned with the development of an innovative approach to model time-dependent shape of gas/liquid interfaces in the presence of solid walls. The proposed approach combines a modified level-set method with an advanced CFD code, NPHASE. The coupled numerical solver can be used to simulate the evolution of gas/liquid interfaces in two-phase flows for a variety of geometries and flow conditions, from individual bubbles to free surfaces (stratified flows). The issues discussed in the full paper will include: a description of the novel aspects of the proposed level-set concept based method, an overview of the NPHASE code modeling framework and a description of the coupling method between these two elements of the overall model. A particular attention will be give to the consistency and completeness of model formulation for the interfacial phenomena near the liquid/gas/solid triple line, and to the impact of the proposed numerical approach on the accuracy and consistency of predictions. The accuracy will be measured in terms of both the calculated shape of the interfaces and the gas and liquid velocity fields around the interfaces and in the entire computational domain. The results of model testing and validation will also be shown in the full paper. The situations analyzed will include: bubbles of different sizes and varying

  2. Fluoroscopy-guided insertion of nasojejunal tubes in children - setting local diagnostic reference levels

    International Nuclear Information System (INIS)

    Vitta, Lavanya; Raghavan, Ashok; Sprigg, Alan; Morrell, Rachel

    2009-01-01

    Little is known about the radiation burden from fluoroscopy-guided insertions of nasojejunal tubes (NJTs) in children. There are no recommended or published standards of diagnostic reference levels (DRLs) available. To establish reference dose area product (DAP) levels for the fluoroscopy-guided insertion of nasojejunal tubes as a basis for setting DRLs for children. In addition, we wanted to assess our local practice and determine the success and complication rates associated with this procedure. Children who had NJT insertion procedures were identified retrospectively from the fluoroscopy database. The age of the child at the time of the procedure, DAP, screening time, outcome of the procedure, and any complications were recorded for each procedure. As the radiation dose depends on the size of the child, the children were assigned to three different age groups. The sample size, mean, median and third-quartile DAPs were calculated for each group. The third-quartile values were used to establish the DRLs. Of 186 procedures performed, 172 were successful on the first attempt. These were performed in a total of 43 children with 60% having multiple insertions over time. The third-quartile DAPs were as follows for each age group: 0-12 months, 2.6 cGy cm 2 ; 1-7 years, 2.45 cGy cm 2 ; >8 years, 14.6 cGy cm 2 . High DAP readings were obtained in the 0-12 months (n = 4) and >8 years (n = 2) age groups. No immediate complications were recorded. Fluoroscopy-guided insertion of NJTs is a highly successful procedure in a selected population of children and is associated with a low complication rate. The radiation dose per procedure is relatively low. (orig.)

  3. Evaluation of two-phase flow solvers using Level Set and Volume of Fluid methods

    Science.gov (United States)

    Bilger, C.; Aboukhedr, M.; Vogiatzaki, K.; Cant, R. S.

    2017-09-01

    Two principal methods have been used to simulate the evolution of two-phase immiscible flows of liquid and gas separated by an interface. These are the Level-Set (LS) method and the Volume of Fluid (VoF) method. Both methods attempt to represent the very sharp interface between the phases and to deal with the large jumps in physical properties associated with it. Both methods have their own strengths and weaknesses. For example, the VoF method is known to be prone to excessive numerical diffusion, while the basic LS method has some difficulty in conserving mass. Major progress has been made in remedying these deficiencies, and both methods have now reached a high level of physical accuracy. Nevertheless, there remains an issue, in that each of these methods has been developed by different research groups, using different codes and most importantly the implementations have been fine tuned to tackle different applications. Thus, it remains unclear what are the remaining advantages and drawbacks of each method relative to the other, and what might be the optimal way to unify them. In this paper, we address this gap by performing a direct comparison of two current state-of-the-art variations of these methods (LS: RCLSFoam and VoF: interPore) and implemented in the same code (OpenFoam). We subject both methods to a pair of benchmark test cases while using the same numerical meshes to examine a) the accuracy of curvature representation, b) the effect of tuning parameters, c) the ability to minimise spurious velocities and d) the ability to tackle fluids with very different densities. For each method, one of the test cases is chosen to be fairly benign while the other test case is expected to present a greater challenge. The results indicate that both methods can be made to work well on both test cases, while displaying different sensitivity to the relevant parameters.

  4. Numerical simulations of natural or mixed convection in vertical channels: comparisons of level-set numerical schemes for the modeling of immiscible incompressible fluid flows

    International Nuclear Information System (INIS)

    Li, R.

    2012-01-01

    The aim of this research dissertation is at studying natural and mixed convections of fluid flows, and to develop and validate numerical schemes for interface tracking in order to treat incompressible and immiscible fluid flows, later. In a first step, an original numerical method, based on Finite Volume discretizations, is developed for modeling low Mach number flows with large temperature gaps. Three physical applications on air flowing through vertical heated parallel plates were investigated. We showed that the optimum spacing corresponding to the peak heat flux transferred from an array of isothermal parallel plates cooled by mixed convection is smaller than those for natural or forced convections when the pressure drop at the outlet keeps constant. We also proved that mixed convection flows resulting from an imposed flow rate may exhibit unexpected physical solutions; alternative model based on prescribed total pressure at inlet and fixed pressure at outlet sections gives more realistic results. For channels heated by heat flux on one wall only, surface radiation tends to suppress the onset of re-circulations at the outlet and to unify the walls temperature. In a second step, the mathematical model coupling the incompressible Navier-Stokes equations and the Level-Set method for interface tracking is derived. Improvements in fluid volume conservation by using high order discretization (ENO-WENO) schemes for the transport equation and variants of the signed distance equation are discussed. (author)

  5. [Cardiac Synchronization Function Estimation Based on ASM Level Set Segmentation Method].

    Science.gov (United States)

    Zhang, Yaonan; Gao, Yuan; Tang, Liang; He, Ying; Zhang, Huie

    At present, there is no accurate and quantitative methods for the determination of cardiac mechanical synchronism, and quantitative determination of the synchronization function of the four cardiac cavities with medical images has a great clinical value. This paper uses the whole heart ultrasound image sequence, and segments the left & right atriums and left & right ventricles of each frame. After the segmentation, the number of pixels in each cavity and in each frame is recorded, and the areas of the four cavities of the image sequence are therefore obtained. The area change curves of the four cavities are further extracted, and the synchronous information of the four cavities is obtained. Because of the low SNR of Ultrasound images, the boundary lines of cardiac cavities are vague, so the extraction of cardiac contours is still a challenging problem. Therefore, the ASM model information is added to the traditional level set method to force the curve evolution process. According to the experimental results, the improved method improves the accuracy of the segmentation. Furthermore, based on the ventricular segmentation, the right and left ventricular systolic functions are evaluated, mainly according to the area changes. The synchronization of the four cavities of the heart is estimated based on the area changes and the volume changes.

  6. Automatic Fontanel Extraction from Newborns' CT Images Using Variational Level Set

    Science.gov (United States)

    Kazemi, Kamran; Ghadimi, Sona; Lyaghat, Alireza; Tarighati, Alla; Golshaeyan, Narjes; Abrishami-Moghaddam, Hamid; Grebe, Reinhard; Gondary-Jouet, Catherine; Wallois, Fabrice

    A realistic head model is needed for source localization methods used for the study of epilepsy in neonates applying Electroencephalographic (EEG) measurements from the scalp. The earliest models consider the head as a series of concentric spheres, each layer corresponding to a different tissue whose conductivity is assumed to be homogeneous. The results of the source reconstruction depend highly on the electric conductivities of the tissues forming the head.The most used model is constituted of three layers (scalp, skull, and intracranial). Most of the major bones of the neonates’ skull are ossified at birth but can slightly move relative to each other. This is due to the sutures, fibrous membranes that at this stage of development connect the already ossified flat bones of the neurocranium. These weak parts of the neurocranium are called fontanels. Thus it is important to enter the exact geometry of fontaneles and flat bone in a source reconstruction because they show pronounced in conductivity. Computer Tomography (CT) imaging provides an excellent tool for non-invasive investigation of the skull which expresses itself in high contrast to all other tissues while the fontanels only can be identified as absence of bone, gaps in the skull formed by flat bone. Therefore, the aim of this paper is to extract the fontanels from CT images applying a variational level set method. We applied the proposed method to CT-images of five different subjects. The automatically extracted fontanels show good agreement with the manually extracted ones.

  7. Two-phase electro-hydrodynamic flow modeling by a conservative level set model.

    Science.gov (United States)

    Lin, Yuan

    2013-03-01

    The principles of electro-hydrodynamic (EHD) flow have been known for more than a century and have been adopted for various industrial applications, for example, fluid mixing and demixing. Analytical solutions of such EHD flow only exist in a limited number of scenarios, for example, predicting a small deformation of a single droplet in a uniform electric field. Numerical modeling of such phenomena can provide significant insights about EHDs multiphase flows. During the last decade, many numerical results have been reported to provide novel and useful tools of studying the multiphase EHD flow. Based on a conservative level set method, the proposed model is able to simulate large deformations of a droplet by a steady electric field, which is beyond the region of theoretic prediction. The model is validated for both leaky dielectrics and perfect dielectrics, and is found to be in excellent agreement with existing analytical solutions and numerical studies in the literature. Furthermore, simulations of the deformation of a water droplet in decyl alcohol in a steady electric field match better with published experimental data than the theoretical prediction for large deformations. Therefore the proposed model can serve as a practical and accurate tool for simulating two-phase EHD flow. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Tokunaga and Horton self-similarity for level set trees of Markov chains

    International Nuclear Information System (INIS)

    Zaliapin, Ilia; Kovchegov, Yevgeniy

    2012-01-01

    Highlights: ► Self-similar properties of the level set trees for Markov chains are studied. ► Tokunaga and Horton self-similarity are established for symmetric Markov chains and regular Brownian motion. ► Strong, distributional self-similarity is established for symmetric Markov chains with exponential jumps. ► It is conjectured that fractional Brownian motions are Tokunaga self-similar. - Abstract: The Horton and Tokunaga branching laws provide a convenient framework for studying self-similarity in random trees. The Horton self-similarity is a weaker property that addresses the principal branching in a tree; it is a counterpart of the power-law size distribution for elements of a branching system. The stronger Tokunaga self-similarity addresses so-called side branching. The Horton and Tokunaga self-similarity have been empirically established in numerous observed and modeled systems, and proven for two paradigmatic models: the critical Galton–Watson branching process with finite progeny and the finite-tree representation of a regular Brownian excursion. This study establishes the Tokunaga and Horton self-similarity for a tree representation of a finite symmetric homogeneous Markov chain. We also extend the concept of Horton and Tokunaga self-similarity to infinite trees and establish self-similarity for an infinite-tree representation of a regular Brownian motion. We conjecture that fractional Brownian motions are also Tokunaga and Horton self-similar, with self-similarity parameters depending on the Hurst exponent.

  9. Delineating Facies Spatial Distribution by Integrating Ensemble Data Assimilation and Indicator Geostatistics with Level Set Transformation.

    Energy Technology Data Exchange (ETDEWEB)

    Hammond, Glenn Edward; Song, Xuehang; Ye, Ming; Dai, Zhenxue; Zachara, John; Chen, Xingyuan

    2017-03-01

    A new approach is developed to delineate the spatial distribution of discrete facies (geological units that have unique distributions of hydraulic, physical, and/or chemical properties) conditioned not only on direct data (measurements directly related to facies properties, e.g., grain size distribution obtained from borehole samples) but also on indirect data (observations indirectly related to facies distribution, e.g., hydraulic head and tracer concentration). Our method integrates for the first time ensemble data assimilation with traditional transition probability-based geostatistics. The concept of level set is introduced to build shape parameterization that allows transformation between discrete facies indicators and continuous random variables. The spatial structure of different facies is simulated by indicator models using conditioning points selected adaptively during the iterative process of data assimilation. To evaluate the new method, a two-dimensional semi-synthetic example is designed to estimate the spatial distribution and permeability of two distinct facies from transient head data induced by pumping tests. The example demonstrates that our new method adequately captures the spatial pattern of facies distribution by imposing spatial continuity through conditioning points. The new method also reproduces the overall response in hydraulic head field with better accuracy compared to data assimilation with no constraints on spatial continuity on facies.

  10. Measurement of thermally ablated lesions in sonoelastographic images using level set methods

    Science.gov (United States)

    Castaneda, Benjamin; Tamez-Pena, Jose Gerardo; Zhang, Man; Hoyt, Kenneth; Bylund, Kevin; Christensen, Jared; Saad, Wael; Strang, John; Rubens, Deborah J.; Parker, Kevin J.

    2008-03-01

    The capability of sonoelastography to detect lesions based on elasticity contrast can be applied to monitor the creation of thermally ablated lesion. Currently, segmentation of lesions depicted in sonoelastographic images is performed manually which can be a time consuming process and prone to significant intra- and inter-observer variability. This work presents a semi-automated segmentation algorithm for sonoelastographic data. The user starts by planting a seed in the perceived center of the lesion. Fast marching methods use this information to create an initial estimate of the lesion. Subsequently, level set methods refine its final shape by attaching the segmented contour to edges in the image while maintaining smoothness. The algorithm is applied to in vivo sonoelastographic images from twenty five thermal ablated lesions created in porcine livers. The estimated area is compared to results from manual segmentation and gross pathology images. Results show that the algorithm outperforms manual segmentation in accuracy, inter- and intra-observer variability. The processing time per image is significantly reduced.

  11. Flipping for success: evaluating the effectiveness of a novel teaching approach in a graduate level setting.

    Science.gov (United States)

    Moraros, John; Islam, Adiba; Yu, Stan; Banow, Ryan; Schindelka, Barbara

    2015-02-28

    opportunities based on problem-solving activities and offer timely feedback/guidance to students. Yet in our study, this teaching style had its fair share of challenges, which were largely dependent on the use and management of technology. Despite these challenges, the Flipped Classroom proved to be a novel and effective teaching approach at the graduate level setting.

  12. DESIRE FOR LEVELS. Background study for the policy document "Setting Environmental Quality Standards for Water and Soil"

    NARCIS (Netherlands)

    van de Meent D; Aldenberg T; Canton JH; van Gestel CAM; Slooff W

    1990-01-01

    The report provides scientific support for setting environmental quality objectives for water, sediment and soil. Quality criteria are not set in this report. Only options for decisions are given. The report is restricted to the derivation of the 'maximally acceptable risk' levels (MAR)

  13. Comparative performance of the CKD Epidemiology Collaboration (CKD-EPI) and the Modification of Diet in Renal Disease (MDRD) Study equations for estimating GFR levels above 60 mL/min/1.73 m2.

    Science.gov (United States)

    Stevens, Lesley A; Schmid, Christopher H; Greene, Tom; Zhang, Yaping Lucy; Beck, Gerald J; Froissart, Marc; Hamm, Lee L; Lewis, Julia B; Mauer, Michael; Navis, Gerjan J; Steffes, Michael W; Eggers, Paul W; Coresh, Josef; Levey, Andrew S

    2010-09-01

    The Modification of Diet in Renal Disease (MDRD) Study equation underestimates measured glomerular filtration rate (GFR) at levels>60 mL/min/1.73 m2, with variable accuracy among subgroups; consequently, estimated GFR (eGFR)>or=60 mL/min/1.73 m2 is not reported by clinical laboratories. Here, performance of a more accurate GFR-estimating equation, the Chronic Kidney Disease Epidemiology Collaboration (CKD-EPI) equation, is reported by level of GFR and clinical characteristics. Test of diagnostic accuracy. Pooled data set of 3,896 people from 16 studies with measured GFR (not used for the development of either equation). Subgroups were defined by eGFR, age, sex, race, diabetes, prior solid-organ transplant, and body mass index. eGFR from the CKD-EPI and MDRD Study equations and standardized serum creatinine. Measured GFR using urinary or plasma clearance of exogenous filtration markers. Mean measured GFR was 68+/-36 (SD) mL/min/1.73 m2. For eGFR73 m2, both equations have similar bias (median difference compared with measured GFR). For eGFR of 30-59 mL/min/1.73 m2, bias was decreased from 4.9 to 2.1 mL/min/1.73 m2 (57% improvement). For eGFR of 60-89 mL/min/1.73 m2, bias was decreased from 11.9 to 4.2 mL/min/1.73 m2 (61% improvement). For eGFR of 90-119 mL/min/1.73 m2, bias was decreased from 10.0 to 1.9 mL/min/1.73 m2 (75% improvement). Similar or improved performance was noted for most subgroups with eGFR73 m2, other than body mass indexor=90 mL/min/1.73 m2. Limited number of elderly people and racial and ethnic minorities with measured GFR. The CKD-EPI equation is more accurate than the MDRD Study equation overall and across most subgroups. In contrast to the MDRD Study equation, eGFR>or=60 mL/min/1.73 m2 can be reported using the CKD-EPI equation. Copyright (c) 2010 National Kidney Foundation, Inc. All rights reserved.

  14. Toward accurate tooth segmentation from computed tomography images using a hybrid level set model

    Energy Technology Data Exchange (ETDEWEB)

    Gan, Yangzhou; Zhao, Qunfei [Department of Automation, Shanghai Jiao Tong University, and Key Laboratory of System Control and Information Processing, Ministry of Education of China, Shanghai 200240 (China); Xia, Zeyang, E-mail: zy.xia@siat.ac.cn, E-mail: jing.xiong@siat.ac.cn; Hu, Ying [Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, and The Chinese University of Hong Kong, Shenzhen 518055 (China); Xiong, Jing, E-mail: zy.xia@siat.ac.cn, E-mail: jing.xiong@siat.ac.cn [Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 510855 (China); Zhang, Jianwei [TAMS, Department of Informatics, University of Hamburg, Hamburg 22527 (Germany)

    2015-01-15

    Purpose: A three-dimensional (3D) model of the teeth provides important information for orthodontic diagnosis and treatment planning. Tooth segmentation is an essential step in generating the 3D digital model from computed tomography (CT) images. The aim of this study is to develop an accurate and efficient tooth segmentation method from CT images. Methods: The 3D dental CT volumetric images are segmented slice by slice in a two-dimensional (2D) transverse plane. The 2D segmentation is composed of a manual initialization step and an automatic slice by slice segmentation step. In the manual initialization step, the user manually picks a starting slice and selects a seed point for each tooth in this slice. In the automatic slice segmentation step, a developed hybrid level set model is applied to segment tooth contours from each slice. Tooth contour propagation strategy is employed to initialize the level set function automatically. Cone beam CT (CBCT) images of two subjects were used to tune the parameters. Images of 16 additional subjects were used to validate the performance of the method. Volume overlap metrics and surface distance metrics were adopted to assess the segmentation accuracy quantitatively. The volume overlap metrics were volume difference (VD, mm{sup 3}) and Dice similarity coefficient (DSC, %). The surface distance metrics were average symmetric surface distance (ASSD, mm), RMS (root mean square) symmetric surface distance (RMSSSD, mm), and maximum symmetric surface distance (MSSD, mm). Computation time was recorded to assess the efficiency. The performance of the proposed method has been compared with two state-of-the-art methods. Results: For the tested CBCT images, the VD, DSC, ASSD, RMSSSD, and MSSD for the incisor were 38.16 ± 12.94 mm{sup 3}, 88.82 ± 2.14%, 0.29 ± 0.03 mm, 0.32 ± 0.08 mm, and 1.25 ± 0.58 mm, respectively; the VD, DSC, ASSD, RMSSSD, and MSSD for the canine were 49.12 ± 9.33 mm{sup 3}, 91.57 ± 0.82%, 0.27 ± 0.02 mm, 0

  15. Toward accurate tooth segmentation from computed tomography images using a hybrid level set model

    International Nuclear Information System (INIS)

    Gan, Yangzhou; Zhao, Qunfei; Xia, Zeyang; Hu, Ying; Xiong, Jing; Zhang, Jianwei

    2015-01-01

    Purpose: A three-dimensional (3D) model of the teeth provides important information for orthodontic diagnosis and treatment planning. Tooth segmentation is an essential step in generating the 3D digital model from computed tomography (CT) images. The aim of this study is to develop an accurate and efficient tooth segmentation method from CT images. Methods: The 3D dental CT volumetric images are segmented slice by slice in a two-dimensional (2D) transverse plane. The 2D segmentation is composed of a manual initialization step and an automatic slice by slice segmentation step. In the manual initialization step, the user manually picks a starting slice and selects a seed point for each tooth in this slice. In the automatic slice segmentation step, a developed hybrid level set model is applied to segment tooth contours from each slice. Tooth contour propagation strategy is employed to initialize the level set function automatically. Cone beam CT (CBCT) images of two subjects were used to tune the parameters. Images of 16 additional subjects were used to validate the performance of the method. Volume overlap metrics and surface distance metrics were adopted to assess the segmentation accuracy quantitatively. The volume overlap metrics were volume difference (VD, mm 3 ) and Dice similarity coefficient (DSC, %). The surface distance metrics were average symmetric surface distance (ASSD, mm), RMS (root mean square) symmetric surface distance (RMSSSD, mm), and maximum symmetric surface distance (MSSD, mm). Computation time was recorded to assess the efficiency. The performance of the proposed method has been compared with two state-of-the-art methods. Results: For the tested CBCT images, the VD, DSC, ASSD, RMSSSD, and MSSD for the incisor were 38.16 ± 12.94 mm 3 , 88.82 ± 2.14%, 0.29 ± 0.03 mm, 0.32 ± 0.08 mm, and 1.25 ± 0.58 mm, respectively; the VD, DSC, ASSD, RMSSSD, and MSSD for the canine were 49.12 ± 9.33 mm 3 , 91.57 ± 0.82%, 0.27 ± 0.02 mm, 0.28 ± 0.03 mm

  16. Multiatlas segmentation of thoracic and abdominal anatomy with level set-based local search.

    Science.gov (United States)

    Schreibmann, Eduard; Marcus, David M; Fox, Tim

    2014-07-08

    Segmentation of organs at risk (OARs) remains one of the most time-consuming tasks in radiotherapy treatment planning. Atlas-based segmentation methods using single templates have emerged as a practical approach to automate the process for brain or head and neck anatomy, but pose significant challenges in regions where large interpatient variations are present. We show that significant changes are needed to autosegment thoracic and abdominal datasets by combining multi-atlas deformable registration with a level set-based local search. Segmentation is hierarchical, with a first stage detecting bulk organ location, and a second step adapting the segmentation to fine details present in the patient scan. The first stage is based on warping multiple presegmented templates to the new patient anatomy using a multimodality deformable registration algorithm able to cope with changes in scanning conditions and artifacts. These segmentations are compacted in a probabilistic map of organ shape using the STAPLE algorithm. Final segmentation is obtained by adjusting the probability map for each organ type, using customized combinations of delineation filters exploiting prior knowledge of organ characteristics. Validation is performed by comparing automated and manual segmentation using the Dice coefficient, measured at an average of 0.971 for the aorta, 0.869 for the trachea, 0.958 for the lungs, 0.788 for the heart, 0.912 for the liver, 0.884 for the kidneys, 0.888 for the vertebrae, 0.863 for the spleen, and 0.740 for the spinal cord. Accurate atlas segmentation for abdominal and thoracic regions can be achieved with the usage of a multi-atlas and perstructure refinement strategy. To improve clinical workflow and efficiency, the algorithm was embedded in a software service, applying the algorithm automatically on acquired scans without any user interaction.

  17. Sensitivity Analysis of features in tolerancing based on constraint function level sets

    International Nuclear Information System (INIS)

    Ziegler, Philipp; Wartzack, Sandro

    2015-01-01

    Usually, the geometry of the manufactured product inherently varies from the nominal geometry. This may negatively affect the product functions and properties (such as quality and reliability), as well as the assemblability of the single components. In order to avoid this, the geometric variation of these component surfaces and associated geometry elements (like hole axes) are restricted by tolerances. Since tighter tolerances lead to significant higher manufacturing costs, tolerances should be specified carefully. Therefore, the impact of deviating component surfaces on functions, properties and assemblability of the product has to be analyzed. As physical experiments are expensive, methods of statistical tolerance analysis tools are widely used in engineering design. Current tolerance simulation tools lack of an appropriate indicator for the impact of deviating component surfaces. In the adoption of Sensitivity Analysis methods, there are several challenges, which arise from the specific framework in tolerancing. This paper presents an approach to adopt Sensitivity Analysis methods on current tolerance simulations with an interface module, which bases on level sets of constraint functions for parameters of the simulation model. The paper is an extension and generalization of Ziegler and Wartzack [1]. Mathematical properties of the constraint functions (convexity, homogeneity), which are important for the computational costs of the Sensitivity Analysis, are shown. The practical use of the method is illustrated in a case study of a plain bearing. - Highlights: • Alternative definition of Deviation Domains. • Proof of mathematical properties of the Deviation Domains. • Definition of the interface between Deviation Domains and Sensitivity Analysis. • Sensitivity analysis of a gearbox to show the methods practical use

  18. CT liver volumetry using geodesic active contour segmentation with a level-set algorithm

    Science.gov (United States)

    Suzuki, Kenji; Epstein, Mark L.; Kohlbrenner, Ryan; Obajuluwa, Ademola; Xu, Jianwu; Hori, Masatoshi; Baron, Richard

    2010-03-01

    Automatic liver segmentation on CT images is challenging because the liver often abuts other organs of a similar density. Our purpose was to develop an accurate automated liver segmentation scheme for measuring liver volumes. We developed an automated volumetry scheme for the liver in CT based on a 5 step schema. First, an anisotropic smoothing filter was applied to portal-venous phase CT images to remove noise while preserving the liver structure, followed by an edge enhancer to enhance the liver boundary. By using the boundary-enhanced image as a speed function, a fastmarching algorithm generated an initial surface that roughly estimated the liver shape. A geodesic-active-contour segmentation algorithm coupled with level-set contour-evolution refined the initial surface so as to more precisely fit the liver boundary. The liver volume was calculated based on the refined liver surface. Hepatic CT scans of eighteen prospective liver donors were obtained under a liver transplant protocol with a multi-detector CT system. Automated liver volumes obtained were compared with those manually traced by a radiologist, used as "gold standard." The mean liver volume obtained with our scheme was 1,520 cc, whereas the mean manual volume was 1,486 cc, with the mean absolute difference of 104 cc (7.0%). CT liver volumetrics based on an automated scheme agreed excellently with "goldstandard" manual volumetrics (intra-class correlation coefficient was 0.95) with no statistically significant difference (p(F<=f)=0.32), and required substantially less completion time. Our automated scheme provides an efficient and accurate way of measuring liver volumes.

  19. Shape Reconstruction of Thin Electromagnetic Inclusions via Boundary Measurements: Level-Set Method Combined with the Topological Derivative

    Directory of Open Access Journals (Sweden)

    Won-Kwang Park

    2013-01-01

    Full Text Available An inverse problem for reconstructing arbitrary-shaped thin penetrable electromagnetic inclusions concealed in a homogeneous material is considered in this paper. For this purpose, the level-set evolution method is adopted. The topological derivative concept is incorporated in order to evaluate the evolution speed of the level-set functions. The results of the corresponding numerical simulations with and without noise are presented in this paper.

  20. Joint inversion of geophysical data using petrophysical clustering and facies deformation wth the level set technique

    Science.gov (United States)

    Revil, A.

    2015-12-01

    Geological expertise and petrophysical relationships can be brought together to provide prior information while inverting multiple geophysical datasets. The merging of such information can result in more realistic solution in the distribution of the model parameters, reducing ipse facto the non-uniqueness of the inverse problem. We consider two level of heterogeneities: facies, described by facies boundaries and heteroegenities inside each facies determined by a correlogram. In this presentation, we pose the geophysical inverse problem in terms of Gaussian random fields with mean functions controlled by petrophysical relationships and covariance functions controlled by a prior geological cross-section, including the definition of spatial boundaries for the geological facies. The petrophysical relationship problem is formulated as a regression problem upon each facies. The inversion of the geophysical data is performed in a Bayesian framework. We demonstrate the usefulness of this strategy using a first synthetic case for which we perform a joint inversion of gravity and galvanometric resistivity data with the stations located at the ground surface. The joint inversion is used to recover the density and resistivity distributions of the subsurface. In a second step, we consider the possibility that the facies boundaries are deformable and their shapes are inverted as well. We use the level set approach to perform such deformation preserving prior topological properties of the facies throughout the inversion. With the help of prior facies petrophysical relationships and topological characteristic of each facies, we make posterior inference about multiple geophysical tomograms based on their corresponding geophysical data misfits. The method is applied to a second synthetic case showing that we can recover the heterogeneities inside the facies, the mean values for the petrophysical properties, and, to some extent, the facies boundaries using the 2D joint inversion of

  1. Improving district level health planning and priority setting in Tanzania through implementing accountability for reasonableness framework

    DEFF Research Database (Denmark)

    Maluka, Stephen; Kamuzora, Peter; Sebastián, Miguel San

    2010-01-01

    In 2006, researchers and decision-makers launched a five-year project - Response to Accountable Priority Setting for Trust in Health Systems (REACT) - to improve planning and priority-setting through implementing the Accountability for Reasonableness framework in Mbarali District, Tanzania...

  2. MO-AB-BRA-01: A Global Level Set Based Formulation for Volumetric Modulated Arc Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, D; Lyu, Q; Ruan, D; O’Connor, D; Low, D; Sheng, K [Department of Radiation Oncology, University of California Los Angeles, Los Angeles, CA (United States)

    2016-06-15

    Purpose: The current clinical Volumetric Modulated Arc Therapy (VMAT) optimization is formulated as a non-convex problem and various greedy heuristics have been employed for an empirical solution, jeopardizing plan consistency and quality. We introduce a novel global direct aperture optimization method for VMAT to overcome these limitations. Methods: The global VMAT (gVMAT) planning was formulated as an optimization problem with an L2-norm fidelity term and an anisotropic total variation term. A level set function was used to describe the aperture shapes and adjacent aperture shapes were penalized to control MLC motion range. An alternating optimization strategy was implemented to solve the fluence intensity and aperture shapes simultaneously. Single arc gVMAT plans, utilizing 180 beams with 2° angular resolution, were generated for a glioblastoma multiforme (GBM), lung (LNG), and 2 head and neck cases—one with 3 PTVs (H&N3PTV) and one with 4 PTVs (H&N4PTV). The plans were compared against the clinical VMAT (cVMAT) plans utilizing two overlapping coplanar arcs. Results: The optimization of the gVMAT plans had converged within 600 iterations. gVMAT reduced the average max and mean OAR dose by 6.59% and 7.45% of the prescription dose. Reductions in max dose and mean dose were as high as 14.5 Gy in the LNG case and 15.3 Gy in the H&N3PTV case. PTV coverages (D95, D98, D99) were within 0.25% of the prescription dose. By globally considering all beams, the gVMAT optimizer allowed some beams to deliver higher intensities, yielding a dose distribution that resembles a static beam IMRT plan with beam orientation optimization. Conclusions: The novel VMAT approach allows for the search of an optimal plan in the global solution space and generates deliverable apertures directly. The single arc VMAT approach fully utilizes the digital linacs’ capability in dose rate and gantry rotation speed modulation. Varian Medical Systems, NIH grant R01CA188300, NIH grant R43CA183390.

  3. Strengthening fairness, transparency and accountability in health care priority setting at district level in Tanzania

    Directory of Open Access Journals (Sweden)

    Stephen Maluka

    2011-11-01

    Full Text Available Health care systems are faced with the challenge of resource scarcity and have insufficient resources to respond to all health problems and target groups simultaneously. Hence, priority setting is an inevitable aspect of every health system. However, priority setting is complex and difficult because the process is frequently influenced by political, institutional and managerial factors that are not considered by conventional priority-setting tools. In a five-year EU-supported project, which started in 2006, ways of strengthening fairness and accountability in priority setting in district health management were studied. This review is based on a PhD thesis that aimed to analyse health care organisation and management systems, and explore the potential and challenges of implementing Accountability for Reasonableness (A4R approach to priority setting in Tanzania. A qualitative case study in Mbarali district formed the basis of exploring the sociopolitical and institutional contexts within which health care decision making takes place. The study also explores how the A4R intervention was shaped, enabled and constrained by the contexts. Key informant interviews were conducted. Relevant documents were also gathered and group priority-setting processes in the district were observed. The study revealed that, despite the obvious national rhetoric on decentralisation, actual practice in the district involved little community participation. The assumption that devolution to local government promotes transparency, accountability and community participation, is far from reality. The study also found that while the A4R approach was perceived to be helpful in strengthening transparency, accountability and stakeholder engagement, integrating the innovation into the district health system was challenging. This study underscores the idea that greater involvement and accountability among local actors may increase the legitimacy and fairness of priority-setting

  4. Investigating the Relationships among Stressors, Stress Level, and Mental Symptoms for Infertile Patients: A Structural Equation Modeling Approach.

    Directory of Open Access Journals (Sweden)

    Jong-Yi Wang

    Full Text Available Patients with infertility are a high risk group in depression and anxiety. However, an existing theoretically and empirically validated model of stressors, stress, and mental symptoms specific for infertile patients is still a void. This study aimed to determine the related factors and their relational structures that affect the level of depressive and anxiety symptoms among infertile patients.A cross-sectional sample of 400 infertility outpatients seeking reproduction treatments in three teaching hospitals across Taiwan participated in the structured questionnaire survey in 2011. The hypothesized model comprising 10 latent variables was tested by Structural Equation Modeling using AMOS 17.Goodness-of-fit indexes, including χ2/DF = 1.871, PGFI = 0.746, PNFI = 0.764, and others, confirmed the modified model fit the data well. Marital stressor, importance of children, guilt-and-blame, and social stressor showed a direct effect on perceived stress. Instead of being a factor of stress, social support was directly and positively related to self-esteem. Perceived stress and self-esteem were the two major mediators for the relationships between stressors and mental symptoms. Increase in social support and self-esteem led to decrease in mental symptoms among the infertile patients.The relational structures were identified and named as the Stressors Stress Symptoms Model, clinically applied to predict anxiety and depression from various stressors. Assessing sources and level of infertility-related stress and implementing culturally-sensitive counseling with an emphasis on positive personal value may assist in preventing the severity of depression and anxiety.

  5. Investigating the Relationships among Stressors, Stress Level, and Mental Symptoms for Infertile Patients: A Structural Equation Modeling Approach.

    Science.gov (United States)

    Wang, Jong-Yi; Li, Yi-Shan; Chen, Jen-De; Liang, Wen-Miin; Yang, Tung-Chuan; Lee, Young-Chang; Wang, Chia-Woei

    2015-01-01

    Patients with infertility are a high risk group in depression and anxiety. However, an existing theoretically and empirically validated model of stressors, stress, and mental symptoms specific for infertile patients is still a void. This study aimed to determine the related factors and their relational structures that affect the level of depressive and anxiety symptoms among infertile patients. A cross-sectional sample of 400 infertility outpatients seeking reproduction treatments in three teaching hospitals across Taiwan participated in the structured questionnaire survey in 2011. The hypothesized model comprising 10 latent variables was tested by Structural Equation Modeling using AMOS 17. Goodness-of-fit indexes, including χ2/DF = 1.871, PGFI = 0.746, PNFI = 0.764, and others, confirmed the modified model fit the data well. Marital stressor, importance of children, guilt-and-blame, and social stressor showed a direct effect on perceived stress. Instead of being a factor of stress, social support was directly and positively related to self-esteem. Perceived stress and self-esteem were the two major mediators for the relationships between stressors and mental symptoms. Increase in social support and self-esteem led to decrease in mental symptoms among the infertile patients. The relational structures were identified and named as the Stressors Stress Symptoms Model, clinically applied to predict anxiety and depression from various stressors. Assessing sources and level of infertility-related stress and implementing culturally-sensitive counseling with an emphasis on positive personal value may assist in preventing the severity of depression and anxiety.

  6. A two-level strategy to realize life-cycle production optimization in an operational setting

    NARCIS (Netherlands)

    Essen, van G.M.; Hof, Van den P.M.J.; Jansen, J.D.

    2012-01-01

    We present a two-level strategy to improve robustness against uncertainty and model errors in life-cycle flooding optimization. At the upper level, a physics-based large-scale reservoir model is used to determine optimal life-cycle injection and production profiles. At the lower level these profiles

  7. A two-level strategy to realize life-cycle production optimization in an operational setting

    NARCIS (Netherlands)

    Essen, van G.M.; Hof, Van den P.M.J.; Jansen, J.D.

    2013-01-01

    We present a two-level strategy to improve robustness against uncertainty and model errors in life-cycle flooding optimization. At the upper level, a physics-based large-scale reservoir model is used to determine optimal life-cycle injection and production profiles. At the lower level these profiles

  8. SET overexpression in HEK293 cells regulates mitochondrial uncoupling proteins levels within a mitochondrial fission/reduced autophagic flux scenario

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Luciana O.; Goto, Renata N. [Department of Clinical Analyses, Toxicology and Food Sciences, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Neto, Marinaldo P.C. [Department of Physics and Chemistry, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Sousa, Lucas O. [Department of Clinical Analyses, Toxicology and Food Sciences, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Curti, Carlos [Department of Physics and Chemistry, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Leopoldino, Andréia M., E-mail: andreiaml@usp.br [Department of Clinical Analyses, Toxicology and Food Sciences, School of Pharmaceutical Sciences of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil)

    2015-03-06

    We hypothesized that SET, a protein accumulated in some cancer types and Alzheimer disease, is involved in cell death through mitochondrial mechanisms. We addressed the mRNA and protein levels of the mitochondrial uncoupling proteins UCP1, UCP2 and UCP3 (S and L isoforms) by quantitative real-time PCR and immunofluorescence as well as other mitochondrial involvements, in HEK293 cells overexpressing the SET protein (HEK293/SET), either in the presence or absence of oxidative stress induced by the pro-oxidant t-butyl hydroperoxide (t-BHP). SET overexpression in HEK293 cells decreased UCP1 and increased UCP2 and UCP3 (S/L) mRNA and protein levels, whilst also preventing lipid peroxidation and decreasing the content of cellular ATP. SET overexpression also (i) decreased the area of mitochondria and increased the number of organelles and lysosomes, (ii) increased mitochondrial fission, as demonstrated by increased FIS1 mRNA and FIS-1 protein levels, an apparent accumulation of DRP-1 protein, and an increase in the VDAC protein level, and (iii) reduced autophagic flux, as demonstrated by a decrease in LC3B lipidation (LC3B-II) in the presence of chloroquine. Therefore, SET overexpression in HEK293 cells promotes mitochondrial fission and reduces autophagic flux in apparent association with up-regulation of UCP2 and UCP3; this implies a potential involvement in cellular processes that are deregulated such as in Alzheimer's disease and cancer. - Highlights: • SET, UCPs and autophagy prevention are correlated. • SET action has mitochondrial involvement. • UCP2/3 may reduce ROS and prevent autophagy. • SET protects cell from ROS via UCP2/3.

  9. On the structure of the master equation for a two-level system coupled to a thermal bath

    International Nuclear Information System (INIS)

    Vega, Inés de

    2015-01-01

    We derive a master equation from the exact stochastic Liouville–von-Neumann (SLN) equation (Stockburger and Grabert 2002 Phys. Rev. Lett. 88 170407). The latter depends on two correlated noises and describes exactly the dynamics of an oscillator (which can be either harmonic or present an anharmonicity) coupled to an environment at thermal equilibrium. The newly derived master equation is obtained by performing analytically the average over different noise trajectories. It is found to have a complex hierarchical structure that might be helpful to explain the convergence problems occurring when performing numerically the stochastic average of trajectories given by the SLN equation (Koch et al 2008 Phys. Rev. Lett. 100 230402, Koch 2010 PhD thesis Fakultät Mathematik und Naturwissenschaften der Technischen Universitat Dresden). (paper)

  10. On the structure of the master equation for a two-level system coupled to a thermal bath

    Science.gov (United States)

    de Vega, Inés

    2015-04-01

    We derive a master equation from the exact stochastic Liouville-von-Neumann (SLN) equation (Stockburger and Grabert 2002 Phys. Rev. Lett. 88 170407). The latter depends on two correlated noises and describes exactly the dynamics of an oscillator (which can be either harmonic or present an anharmonicity) coupled to an environment at thermal equilibrium. The newly derived master equation is obtained by performing analytically the average over different noise trajectories. It is found to have a complex hierarchical structure that might be helpful to explain the convergence problems occurring when performing numerically the stochastic average of trajectories given by the SLN equation (Koch et al 2008 Phys. Rev. Lett. 100 230402, Koch 2010 PhD thesis Fakultät Mathematik und Naturwissenschaften der Technischen Universitat Dresden).

  11. Computerized detection of multiple sclerosis candidate regions based on a level set method using an artificial neural network

    International Nuclear Information System (INIS)

    Kuwazuru, Junpei; Magome, Taiki; Arimura, Hidetaka; Yamashita, Yasuo; Oki, Masafumi; Toyofuku, Fukai; Kakeda, Shingo; Yamamoto, Daisuke

    2010-01-01

    Yamamoto et al. developed the system for computer-aided detection of multiple sclerosis (MS) candidate regions. In a level set method in their proposed method, they employed the constant threshold value for the edge indicator function related to a speed function of the level set method. However, it would be appropriate to adjust the threshold value to each MS candidate region, because the edge magnitudes in MS candidates differ from each other. Our purpose of this study was to develop a computerized detection of MS candidate regions in MR images based on a level set method using an artificial neural network (ANN). To adjust the threshold value for the edge indicator function in the level set method to each true positive (TP) and false positive (FP) region, we constructed the ANN. The ANN could provide the suitable threshold value for each candidate region in the proposed level set method so that TP regions can be segmented and FP regions can be removed. Our proposed method detected MS regions at a sensitivity of 82.1% with 0.204 FPs per slice and similarity index of MS candidate regions was 0.717 on average. (author)

  12. Comparing Panelists' Understanding of Standard Setting across Multiple Levels of an Alternate Science Assessment

    Science.gov (United States)

    Hansen, Mary A.; Lyon, Steven R.; Heh, Peter; Zigmond, Naomi

    2013-01-01

    Large-scale assessment programs, including alternate assessments based on alternate achievement standards (AA-AAS), must provide evidence of technical quality and validity. This study provides information about the technical quality of one AA-AAS by evaluating the standard setting for the science component. The assessment was designed to have…

  13. Averaged RMHD equations

    International Nuclear Information System (INIS)

    Ichiguchi, Katsuji

    1998-01-01

    A new reduced set of resistive MHD equations is derived by averaging the full MHD equations on specified flux coordinates, which is consistent with 3D equilibria. It is confirmed that the total energy is conserved and the linearized equations for ideal modes are self-adjoint. (author)

  14. Organizational factors related to low levels of sickness absence in a representative set of Swedish companies.

    Science.gov (United States)

    Stoetzer, Ulrich; Bergman, Peter; Aborg, Carl; Johansson, Gun; Ahlberg, Gunnel; Parmsund, Marianne; Svartengren, Magnus

    2014-01-01

    The aim of this qualitative study was to identify manageable organizational factors that could explain why some companies have low levels of sickness absence. There may be factors at company level that can be managed to influence levels of sickness absence, and promote health and a prosperous organization. 38 representative Swedish companies. The study included a total of 204 semi-structured interviews at 38 representative Swedish companies. Qualitative thematic analysis was applied to the interviews, primarily with managers, to indicate the organizational factors that characterize companies with low levels of sickness absence. The factors that were found to characterize companies with low levels of sickness absence concerned strategies and procedures for managing leadership, employee development, communication, employee participation and involvement, corporate values and visions, and employee health. The results may be useful in finding strategies and procedures to reduce levels of sickness absence and promote health. There is research at individual level on the reasons for sickness absence. This study tries to elevate the issue to an organizational level. The findings suggest that explicit strategies for managing certain organizational factors can reduce sickness absence and help companies to develop more health-promoting strategies.

  15. Dynamic-thresholding level set: a novel computer-aided volumetry method for liver tumors in hepatic CT images

    Science.gov (United States)

    Cai, Wenli; Yoshida, Hiroyuki; Harris, Gordon J.

    2007-03-01

    Measurement of the volume of focal liver tumors, called liver tumor volumetry, is indispensable for assessing the growth of tumors and for monitoring the response of tumors to oncology treatments. Traditional edge models, such as the maximum gradient and zero-crossing methods, often fail to detect the accurate boundary of a fuzzy object such as a liver tumor. As a result, the computerized volumetry based on these edge models tends to differ from manual segmentation results performed by physicians. In this study, we developed a novel computerized volumetry method for fuzzy objects, called dynamic-thresholding level set (DT level set). An optimal threshold value computed from a histogram tends to shift, relative to the theoretical threshold value obtained from a normal distribution model, toward a smaller region in the histogram. We thus designed a mobile shell structure, called a propagating shell, which is a thick region encompassing the level set front. The optimal threshold calculated from the histogram of the shell drives the level set front toward the boundary of a liver tumor. When the volume ratio between the object and the background in the shell approaches one, the optimal threshold value best fits the theoretical threshold value and the shell stops propagating. Application of the DT level set to 26 hepatic CT cases with 63 biopsy-confirmed hepatocellular carcinomas (HCCs) and metastases showed that the computer measured volumes were highly correlated with those of tumors measured manually by physicians. Our preliminary results showed that DT level set was effective and accurate in estimating the volumes of liver tumors detected in hepatic CT images.

  16. Area-level risk factors for adverse birth outcomes: trends in urban and rural settings

    OpenAIRE

    Kent, Shia T; McClure, Leslie A; Zaitchik, Ben F; Gohlke, Julia M

    2013-01-01

    Background Significant and persistent racial and income disparities in birth outcomes exist in the US. The analyses in this manuscript examine whether adverse birth outcome time trends and associations between area-level variables and adverse birth outcomes differ by urban?rural status. Methods Alabama births records were merged with ZIP code-level census measures of race, poverty, and rurality. B-splines were used to determine long-term preterm birth (PTB) and low birth weight (LBW) trends b...

  17. Representing the Fuzzy improved risk graph for determination of optimized safety integrity level in industrial setting

    Directory of Open Access Journals (Sweden)

    Z. Qorbali

    2013-12-01

    .Conclusion: as a result of establishing the presented method, identical levels in conventional risk graph table are replaced with different sublevels that not only increases the accuracy in determining the SIL, but also elucidates the effective factor in improving the safety level and consequently saves time and cost significantly. The proposed technique has been employed to develop the SIL of Tehran Refinery ISOMAX Center. IRG and FIRG results have been compared to clarify the efficacy and importance of the proposed method

  18. A Comparison of Methods of Vertical Equating.

    Science.gov (United States)

    Loyd, Brenda H.; Hoover, H. D.

    Rasch model vertical equating procedures were applied to three mathematics computation tests for grades six, seven, and eight. Each level of the test was composed of 45 items in three sets of 15 items, arranged in such a way that tests for adjacent grades had two sets (30 items) in common, and the sixth and eighth grades had 15 items in common. In…

  19. Long-Term Impact of Valid Case Criterion on Capturing Population-Level Growth under Item Response Theory Equating. Research Report. ETS RR-17-17

    Science.gov (United States)

    Deng, Weiling; Monfils, Lora

    2017-01-01

    Using simulated data, this study examined the impact of different levels of stringency of the valid case inclusion criterion on item response theory (IRT)-based true score equating over 5 years in the context of K-12 assessment when growth in student achievement is expected. Findings indicate that the use of the most stringent inclusion criterion…

  20. On the Level Set of a Function with Degenerate Minimum Point

    Directory of Open Access Journals (Sweden)

    Yasuhiko Kamiyama

    2015-01-01

    Full Text Available For n≥2, let M be an n-dimensional smooth closed manifold and f:M→R a smooth function. We set minf(M=m and assume that m is attained by unique point p∈M such that p is a nondegenerate critical point. Then the Morse lemma tells us that if a is slightly bigger than m, f-1(a is diffeomorphic to Sn-1. In this paper, we relax the condition on p from being nondegenerate to being an isolated critical point and obtain the same consequence. Some application to the topology of polygon spaces is also included.

  1. CUDA based Level Set Method for 3D Reconstruction of Fishes from Large Acoustic Data

    DEFF Research Database (Denmark)

    Sharma, Ojaswa; Anton, François

    2009-01-01

    Acoustic images present views of underwater dynamics, even in high depths. With multi-beam echo sounders (SONARs), it is possible to capture series of 2D high resolution acoustic images. 3D reconstruction of the water column and subsequent estimation of fish abundance and fish species identificat...... of suppressing threshold and show its convergence as the evolution proceeds. We also present a GPU based streaming computation of the method using NVIDIA's CUDA framework to handle large volume data-sets. Our implementation is optimised for memory usage to handle large volumes....

  2. Wave energy level and geographic setting correlate with Florida beach water quality.

    Science.gov (United States)

    Feng, Zhixuan; Reniers, Ad; Haus, Brian K; Solo-Gabriele, Helena M; Kelly, Elizabeth A

    2016-03-15

    Many recreational beaches suffer from elevated levels of microorganisms, resulting in beach advisories and closures due to lack of compliance with Environmental Protection Agency guidelines. We conducted the first statewide beach water quality assessment by analyzing decadal records of fecal indicator bacteria (enterococci and fecal coliform) levels at 262 Florida beaches. The objectives were to depict synoptic patterns of beach water quality exceedance along the entire Florida shoreline and to evaluate their relationships with wave condition and geographic location. Percent exceedances based on enterococci and fecal coliform were negatively correlated with both long-term mean wave energy and beach slope. Also, Gulf of Mexico beaches exceeded the thresholds significantly more than Atlantic Ocean ones, perhaps partially due to the lower wave energy. A possible linkage between wave energy level and water quality is beach sand, a pervasive nonpoint source that tends to harbor more bacteria in the low-wave-energy environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Area-level risk factors for adverse birth outcomes: trends in urban and rural settings.

    Science.gov (United States)

    Kent, Shia T; McClure, Leslie A; Zaitchik, Ben F; Gohlke, Julia M

    2013-06-10

    Significant and persistent racial and income disparities in birth outcomes exist in the US. The analyses in this manuscript examine whether adverse birth outcome time trends and associations between area-level variables and adverse birth outcomes differ by urban-rural status. Alabama births records were merged with ZIP code-level census measures of race, poverty, and rurality. B-splines were used to determine long-term preterm birth (PTB) and low birth weight (LBW) trends by rurality. Logistic regression models were used to examine differences in the relationships between ZIP code-level percent poverty or percent African-American with either PTB or LBW. Interactions with rurality were examined. Population dense areas had higher adverse birth outcome rates compared to other regions. For LBW, the disparity between population dense and other regions increased during the 1991-2005 time period, and the magnitude of the disparity was maintained through 2010. Overall PTB and LBW rates have decreased since 2006, except within isolated rural regions. The addition of individual-level socioeconomic or race risk factors greatly attenuated these geographical disparities, but isolated rural regions maintained increased odds of adverse birth outcomes. ZIP code-level percent poverty and percent African American both had significant relationships with adverse birth outcomes. Poverty associations remained significant in the most population-dense regions when models were adjusted for individual-level risk factors. Population dense urban areas have heightened rates of adverse birth outcomes. High-poverty African American areas have higher odds of adverse birth outcomes in urban versus rural regions. These results suggest there are urban-specific social or environmental factors increasing risk for adverse birth outcomes in underserved communities. On the other hand, trends in PTBs and LBWs suggest interventions that have decreased adverse birth outcomes elsewhere may not be reaching

  4. County-Level Poverty Is Equally Associated with Unmet Health Care Needs in Rural and Urban Settings

    Science.gov (United States)

    Peterson, Lars E.; Litaker, David G.

    2010-01-01

    Context: Regional poverty is associated with reduced access to health care. Whether this relationship is equally strong in both rural and urban settings or is affected by the contextual and individual-level characteristics that distinguish these areas, is unclear. Purpose: Compare the association between regional poverty with self-reported unmet…

  5. The Daily Events and Emotions of Master's-Level Family Therapy Trainees in Off-Campus Practicum Settings

    Science.gov (United States)

    Edwards, Todd M.; Patterson, Jo Ellen

    2012-01-01

    The Day Reconstruction Method (DRM) was used to assess the daily events and emotions of one program's master's-level family therapy trainees in off-campus practicum settings. This study examines the DRM reports of 35 family therapy trainees in the second year of their master's program in marriage and family therapy. Four themes emerged from the…

  6. Activity Sets in Multi-Organizational Ecologies : A Project-Level Perspective on Sustainable Energy Innovations

    NARCIS (Netherlands)

    Gerrit Willem Ziggers; Kristina Manser; Bas Hillebrand; Paul Driessen; Josée Bloemer

    2014-01-01

    Complex innovations involve multi-organizational ecologies consisting of a myriad of different actors. This study investigates how innovation activities can be interpreted in the context of multi-organizational ecologies. Taking a project-level perspective, this study proposes a typology of four

  7. Supporting Diverse Young Adolescents: Cooperative Grouping in Inclusive Middle-Level Settings

    Science.gov (United States)

    Miller, Nicole C.; McKissick, Bethany R.; Ivy, Jessica T.; Moser, Kelly

    2017-01-01

    The middle level classroom presents unique challenges to educators who strive to provide opportunities that acknowledge learner diversity in terms of social, cognitive, physical, and emotional development. This is confounded even further within inclusive middle-school classrooms where the responsibility to differentiate instruction is even more…

  8. Flipping for success: evaluating the effectiveness of a novel teaching approach in a graduate level setting

    OpenAIRE

    Moraros, John; Islam, Adiba; Yu, Stan; Banow, Ryan; Schindelka, Barbara

    2015-01-01

    Background Flipped Classroom is a model that?s quickly gaining recognition as a novel teaching approach among health science curricula. The purpose of this study was four-fold and aimed to compare Flipped Classroom effectiveness ratings with: 1) student socio-demographic characteristics, 2) student final grades, 3) student overall course satisfaction, and 4) course pre-Flipped Classroom effectiveness ratings. Methods The participants in the study consisted of 67 Masters-level graduate student...

  9. A highly efficient 3D level-set grain growth algorithm tailored for ccNUMA architecture

    Science.gov (United States)

    Mießen, C.; Velinov, N.; Gottstein, G.; Barrales-Mora, L. A.

    2017-12-01

    A highly efficient simulation model for 2D and 3D grain growth was developed based on the level-set method. The model introduces modern computational concepts to achieve excellent performance on parallel computer architectures. Strong scalability was measured on cache-coherent non-uniform memory access (ccNUMA) architectures. To achieve this, the proposed approach considers the application of local level-set functions at the grain level. Ideal and non-ideal grain growth was simulated in 3D with the objective to study the evolution of statistical representative volume elements in polycrystals. In addition, microstructure evolution in an anisotropic magnetic material affected by an external magnetic field was simulated.

  10. Implementing and measuring the level of laboratory service integration in a program setting in Nigeria.

    Directory of Open Access Journals (Sweden)

    Henry Mbah

    Full Text Available The surge of donor funds to fight HIV&AIDS epidemic inadvertently resulted in the setup of laboratories as parallel structures to rapidly respond to the identified need. However these parallel structures are a threat to the existing fragile laboratory systems. Laboratory service integration is critical to remedy this situation. This paper describes an approach to quantitatively measure and track integration of HIV-related laboratory services into the mainstream laboratory services and highlight some key intervention steps taken, to enhance service integration.A quantitative before-and-after study conducted in 122 Family Health International (FHI360 supported health facilities across Nigeria. A minimum service package was identified including management structure; trainings; equipment utilization and maintenance; information, commodity and quality management for laboratory integration. A check list was used to assess facilities at baseline and 3 months follow-up. Level of integration was assessed on an ordinal scale (0 = no integration, 1 = partial integration, 2 = full integration for each service package. A composite score grading expressed as a percentage of total obtainable score of 14 was defined and used to classify facilities (≤ 80% FULL, 25% to 79% PARTIAL and <25% NO integration. Weaknesses were noted and addressed.We analyzed 9 (7.4% primary, 104 (85.2% secondary and 9 (7.4% tertiary level facilities. There were statistically significant differences in integration levels between baseline and 3 months follow-up period (p<0.01. Baseline median total integration score was 4 (IQR 3 to 5 compared to 7 (IQR 4 to 9 at 3 months follow-up (p = 0.000. Partial and fully integrated laboratory systems were 64 (52.5% and 0 (0.0% at baseline, compared to 100 (82.0% and 3 (2.4% respectively at 3 months follow-up (p = 0.000.This project showcases our novel approach to measure the status of each laboratory on the integration continuum.

  11. Job satisfaction in nurses working in tertiary level health care settings of Islamabad, Pakistan.

    Science.gov (United States)

    Bahalkani, Habib Akhtar; Kumar, Ramesh; Lakho, Abdul Rehman; Mahar, Benazir; Mazhar, Syeda Batool; Majeed, Abdul

    2011-01-01

    Job satisfaction greatly determines the productivity and efficiency of human resource for health. It literally means: 'the extent to which Health Professionals like or dislike their jobs'. Job satisfaction is said to be linked with employee's work environment, job responsibilities, and powers; and time pressure among various health professionals. As such it affects employee's organizational commitment and consequently the quality of health services. Objective of this study was to determine the level of job satisfaction and factors influencing it among nurses in a public sector hospital of Islamabad. A cross sectional study with self-administered structured questionnaire was conducted in the federal capital of Pakistan, Islamabad. Sample included 56 qualified nurses working in a tertiary care hospital. Overall 86% respondents were dissatisfied with about 26% highly dissatisfied with their job. The work environments, poor fringe benefits, dignity, responsibility given at workplace and time pressure were reason for dissatisfaction. Poor work environment, low salaries, lack of training opportunities, proper supervision, time pressure and financial rewards reported by the respondents. Our findings state a low level of overall satisfaction among workers in a public sector tertiary care health organization in Islamabad. Most of this dissatisfaction is caused by poor salaries, not given the due respect, poor work environment, unbalanced responsibilities with little overall control, time pressure, patient care and lack of opportunities for professional development.

  12. County-level poverty is equally associated with unmet health care needs in rural and urban settings.

    Science.gov (United States)

    Peterson, Lars E; Litaker, David G

    2010-01-01

    Regional poverty is associated with reduced access to health care. Whether this relationship is equally strong in both rural and urban settings or is affected by the contextual and individual-level characteristics that distinguish these areas, is unclear. Compare the association between regional poverty with self-reported unmet need, a marker of health care access, by rural/urban setting. Multilevel, cross-sectional analysis of a state-representative sample of 39,953 adults stratified by rural/urban status, linked at the county level to data describing contextual characteristics. Weighted random intercept models examined the independent association of regional poverty with unmet needs, controlling for a range of contextual and individual-level characteristics. The unadjusted association between regional poverty levels and unmet needs was similar in both rural (OR = 1.06 [95% CI, 1.04-1.08]) and urban (OR = 1.03 [1.02-1.05]) settings. Adjusting for other contextual characteristics increased the size of the association in both rural (OR = 1.11 [1.04-1.19]) and urban (OR = 1.11 [1.05-1.18]) settings. Further adjustment for individual characteristics had little additional effect in rural (OR = 1.10 [1.00-1.20]) or urban (OR = 1.11 [1.01-1.22]) settings. To better meet the health care needs of all Americans, health care systems in areas with high regional poverty should acknowledge the relationship between poverty and unmet health care needs. Investments, or other interventions, that reduce regional poverty may be useful strategies for improving health through better access to health care. © 2010 National Rural Health Association.

  13. Comparing of goal setting strategy with group education method to increase physical activity level: A randomized trial.

    Science.gov (United States)

    Jiryaee, Nasrin; Siadat, Zahra Dana; Zamani, Ahmadreza; Taleban, Roya

    2015-10-01

    Designing an intervention to increase physical activity is important to be based on the health care settings resources and be acceptable by the subject group. This study was designed to assess and compare the effect of the goal setting strategy with a group education method on increasing the physical activity of mothers of children aged 1 to 5. Mothers who had at least one child of 1-5 years were randomized into two groups. The effect of 1) goal-setting strategy and 2) group education method on increasing physical activity was assessed and compared 1 month and 3 months after the intervention. Also, the weight, height, body mass index (BMI), waist and hip circumference, and well-being were compared between the two groups before and after the intervention. Physical activity level increased significantly after the intervention in the goal-setting group and it was significantly different between the two groups after intervention (P goal-setting group after the intervention. In the group education method, only the well-being score improved significantly (P goal-setting strategy to boost physical activity, improving the state of well-being and decreasing BMI, waist, and hip circumference.

  14. Comparing of goal setting strategy with group education method to increase physical activity level: A randomized trial

    Directory of Open Access Journals (Sweden)

    Nasrin Jiryaee

    2015-01-01

    Full Text Available Background: Designing an intervention to increase physical activity is important to be based on the health care settings resources and be acceptable by the subject group. This study was designed to assess and compare the effect of the goal setting strategy with a group education method on increasing the physical activity of mothers of children aged 1 to 5. Materials and Methods: Mothers who had at least one child of 1-5 years were randomized into two groups. The effect of 1 goal-setting strategy and 2 group education method on increasing physical activity was assessed and compared 1 month and 3 months after the intervention. Also, the weight, height, body mass index (BMI, waist and hip circumference, and well-being were compared between the two groups before and after the intervention. Results: Physical activity level increased significantly after the intervention in the goal-setting group and it was significantly different between the two groups after intervention (P < 0.05. BMI, waist circumference, hip circumference, and well-being score were significantly different in the goal-setting group after the intervention. In the group education method, only the well-being score improved significantly (P < 0.05. Conclusion: Our study presented the effects of using the goal-setting strategy to boost physical activity, improving the state of well-being and decreasing BMI, waist, and hip circumference.

  15. Mixed-Format Test Score Equating: Effect of Item-Type Multidimensionality, Length and Composition of Common-Item Set, and Group Ability Difference

    Science.gov (United States)

    Wang, Wei

    2013-01-01

    Mixed-format tests containing both multiple-choice (MC) items and constructed-response (CR) items are now widely used in many testing programs. Mixed-format tests often are considered to be superior to tests containing only MC items although the use of multiple item formats leads to measurement challenges in the context of equating conducted under…

  16. A possible methodological approach to setting up control level of radiation factors

    International Nuclear Information System (INIS)

    Devyatajkin, E.V.; Abramov, Yu.V.

    1986-01-01

    The mathematical formalization of the concept of control levels (CL) which enables one to obtain CL numerical values of controllable parameters required for rapid control purposes is described. The initial data for the assessment of environmental radioactivity are the controllable parameter values that is practical characteristic of controllable radiation factor showing technically measurable or calculation value. The controllable parameters can be divided into two classes depending on the degree of radiation effect on a man: possessing additivity properties (dosimetric class) and non-possessing (radiation class, which comprises the results of control of medium alteration dynamics, equipment operation safety, completeness of protection measures performance). The CL calculation formulas with account for requirements of radiation safety standards (RSS-76) are presented

  17. High Levels of Post-Abortion Complication in a Setting Where Abortion Service Is Not Legalized

    Science.gov (United States)

    Melese, Tadele; Habte, Dereje; Tsima, Billy M.; Mogobe, Keitshokile Dintle; Chabaesele, Kesegofetse; Rankgoane, Goabaone; Keakabetse, Tshiamo R.; Masweu, Mabole; Mokotedi, Mosidi; Motana, Mpho; Moreri-Ntshabele, Badani

    2017-01-01

    Background Maternal mortality due to abortion complications stands among the three leading causes of maternal death in Botswana where there is a restrictive abortion law. This study aimed at assessing the patterns and determinants of post-abortion complications. Methods A retrospective institution based cross-sectional study was conducted at four hospitals from January to August 2014. Data were extracted from patients’ records with regards to their socio-demographic variables, abortion complications and length of hospital stay. Descriptive statistics and bivariate analysis were employed. Result A total of 619 patients’ records were reviewed with a mean (SD) age of 27.12 (5.97) years. The majority of abortions (95.5%) were reported to be spontaneous and 3.9% of the abortions were induced by the patient. Two thirds of the patients were admitted as their first visit to the hospitals and one third were referrals from other health facilities. Two thirds of the patients were admitted as a result of incomplete abortion followed by inevitable abortion (16.8%). Offensive vaginal discharge (17.9%), tender uterus (11.3%), septic shock (3.9%) and pelvic peritonitis (2.4%) were among the physical findings recorded on admission. Clinically detectable anaemia evidenced by pallor was found to be the leading major complication in 193 (31.2%) of the cases followed by hypovolemic and septic shock 65 (10.5%). There were a total of 9 abortion related deaths with a case fatality rate of 1.5%. Self-induced abortion and delayed uterine evacuation of more than six hours were found to have significant association with post-abortion complications (p-values of 0.018 and 0.035 respectively). Conclusion Abortion related complications and deaths are high in our setting where abortion is illegal. Mechanisms need to be devised in the health facilities to evacuate the uterus in good time whenever it is indicated and to be equipped to handle the fatal complications. There is an indication for

  18. High Levels of Post-Abortion Complication in a Setting Where Abortion Service Is Not Legalized.

    Directory of Open Access Journals (Sweden)

    Tadele Melese

    Full Text Available Maternal mortality due to abortion complications stands among the three leading causes of maternal death in Botswana where there is a restrictive abortion law. This study aimed at assessing the patterns and determinants of post-abortion complications.A retrospective institution based cross-sectional study was conducted at four hospitals from January to August 2014. Data were extracted from patients' records with regards to their socio-demographic variables, abortion complications and length of hospital stay. Descriptive statistics and bivariate analysis were employed.A total of 619 patients' records were reviewed with a mean (SD age of 27.12 (5.97 years. The majority of abortions (95.5% were reported to be spontaneous and 3.9% of the abortions were induced by the patient. Two thirds of the patients were admitted as their first visit to the hospitals and one third were referrals from other health facilities. Two thirds of the patients were admitted as a result of incomplete abortion followed by inevitable abortion (16.8%. Offensive vaginal discharge (17.9%, tender uterus (11.3%, septic shock (3.9% and pelvic peritonitis (2.4% were among the physical findings recorded on admission. Clinically detectable anaemia evidenced by pallor was found to be the leading major complication in 193 (31.2% of the cases followed by hypovolemic and septic shock 65 (10.5%. There were a total of 9 abortion related deaths with a case fatality rate of 1.5%. Self-induced abortion and delayed uterine evacuation of more than six hours were found to have significant association with post-abortion complications (p-values of 0.018 and 0.035 respectively.Abortion related complications and deaths are high in our setting where abortion is illegal. Mechanisms need to be devised in the health facilities to evacuate the uterus in good time whenever it is indicated and to be equipped to handle the fatal complications. There is an indication for clinical audit on post-abortion care

  19. Setting up experimental incineration system for low-level radioactive samples and combustion experiments

    International Nuclear Information System (INIS)

    Yumoto, Yasuhiro; Hanafusa, Tadashi; Nagamatsu, Tomohiro; Okada, Shigeru

    1997-01-01

    An incineration system was constructed which were composed of a combustion furnace (AP-150R), a cyclone dust collector, radioisotope trapping and measurement apparatus and a radioisotope storage room built in the first basement of the Radioisotope Center. Low level radioactive samples (LLRS) used for the combustion experiment were composed of combustible material or semi-combustible material containing 500 kBq of 99m TcO 4 or 23.25 kBq of 131 INa. The distribution of radioisotopes both in the inside and outside of combustion furnace were estimated. We measured radioactivity of a smoke duct gas in terminal exit of the exhaust port. In case of combustion of LLRS containing 99m TcO 4 or 131 INa, concentration of radioisotopes at the exhaust port showed less than legal concentration limit of these radioisotopes. In cases of combustion of LLRS containing 99m TcO 4 or 131 INa, decontamination factors of the incineration system were 120 and 1.1, respectively. (author)

  20. Implementing and measuring the level of laboratory service integration in a program setting in Nigeria.

    Science.gov (United States)

    Mbah, Henry; Negedu-Momoh, Olubunmi Ruth; Adedokun, Oluwasanmi; Ikani, Patrick Anibbe; Balogun, Oluseyi; Sanwo, Olusola; Ochei, Kingsley; Ekanem, Maurice; Torpey, Kwasi

    2014-01-01

    The surge of donor funds to fight HIV&AIDS epidemic inadvertently resulted in the setup of laboratories as parallel structures to rapidly respond to the identified need. However these parallel structures are a threat to the existing fragile laboratory systems. Laboratory service integration is critical to remedy this situation. This paper describes an approach to quantitatively measure and track integration of HIV-related laboratory services into the mainstream laboratory services and highlight some key intervention steps taken, to enhance service integration. A quantitative before-and-after study conducted in 122 Family Health International (FHI360) supported health facilities across Nigeria. A minimum service package was identified including management structure; trainings; equipment utilization and maintenance; information, commodity and quality management for laboratory integration. A check list was used to assess facilities at baseline and 3 months follow-up. Level of integration was assessed on an ordinal scale (0 = no integration, 1 = partial integration, 2 = full integration) for each service package. A composite score grading expressed as a percentage of total obtainable score of 14 was defined and used to classify facilities (≤ 80% FULL, 25% to 79% PARTIAL and laboratory systems were 64 (52.5%) and 0 (0.0%) at baseline, compared to 100 (82.0%) and 3 (2.4%) respectively at 3 months follow-up (p = 0.000). This project showcases our novel approach to measure the status of each laboratory on the integration continuum.

  1. SETS reference manual

    International Nuclear Information System (INIS)

    Worrell, R.B.

    1985-05-01

    The Set Equation Transformation System (SETS) is used to achieve the symbolic manipulation of Boolean equations. Symbolic manipulation involves changing equations from their original forms into more useful forms - particularly by applying Boolean identities. The SETS program is an interpreter which reads, interprets, and executes SETS user programs. The user writes a SETS user program specifying the processing to be achieved and submits it, along with the required data, for execution by SETS. Because of the general nature of SETS, i.e., the capability to manipulate Boolean equations regardless of their origin, the program has been used for many different kinds of analysis

  2. Three-Dimensional Simulation of DRIE Process Based on the Narrow Band Level Set and Monte Carlo Method

    Directory of Open Access Journals (Sweden)

    Jia-Cheng Yu

    2018-02-01

    Full Text Available A three-dimensional topography simulation of deep reactive ion etching (DRIE is developed based on the narrow band level set method for surface evolution and Monte Carlo method for flux distribution. The advanced level set method is implemented to simulate the time-related movements of etched surface. In the meanwhile, accelerated by ray tracing algorithm, the Monte Carlo method incorporates all dominant physical and chemical mechanisms such as ion-enhanced etching, ballistic transport, ion scattering, and sidewall passivation. The modified models of charged particles and neutral particles are epitomized to determine the contributions of etching rate. The effects such as scalloping effect and lag effect are investigated in simulations and experiments. Besides, the quantitative analyses are conducted to measure the simulation error. Finally, this simulator will be served as an accurate prediction tool for some MEMS fabrications.

  3. A topology optimization method based on the level set method for the design of negative permeability dielectric metamaterials

    DEFF Research Database (Denmark)

    Otomori, Masaki; Yamada, Takayuki; Izui, Kazuhiro

    2012-01-01

    This paper presents a level set-based topology optimization method for the design of negative permeability dielectric metamaterials. Metamaterials are artificial materials that display extraordinary physical properties that are unavailable with natural materials. The aim of the formulated...... optimization problem is to find optimized layouts of a dielectric material that achieve negative permeability. The presence of grayscale areas in the optimized configurations critically affects the performance of metamaterials, positively as well as negatively, but configurations that contain grayscale areas...... are highly impractical from an engineering and manufacturing point of view. Therefore, a topology optimization method that can obtain clear optimized configurations is desirable. Here, a level set-based topology optimization method incorporating a fictitious interface energy is applied to a negative...

  4. Quasi-min-max Fuzzy MPC of UTSG Water Level Based on Off-Line Invariant Set

    Science.gov (United States)

    Liu, Xiangjie; Jiang, Di; Lee, Kwang Y.

    2015-10-01

    In a nuclear power plant, the water level of the U-tube steam generator (UTSG) must be maintained within a safe range. Traditional control methods encounter difficulties due to the complexity, strong nonlinearity and “swell and shrink” effects, especially at low power levels. A properly designed robust model predictive control can well solve this problem. In this paper, a quasi-min-max fuzzy model predictive controller is developed for controlling the constrained UTSG system. While the online computational burden could be quite large for the real-time control, a bank of ellipsoid invariant sets together with the corresponding feedback control laws are obtained by off-line solving linear matrix inequalities (LMIs). Based on the UTSG states, the online optimization is simplified as a constrained optimization problem with a bisection search for the corresponding ellipsoid invariant set. Simulation results are given to show the effectiveness of the proposed controller.

  5. Individual and setting level predictors of the implementation of a skin cancer prevention program: a multilevel analysis

    Directory of Open Access Journals (Sweden)

    Brownson Ross C

    2010-05-01

    Full Text Available Abstract Background To achieve widespread cancer control, a better understanding is needed of the factors that contribute to successful implementation of effective skin cancer prevention interventions. This study assessed the relative contributions of individual- and setting-level characteristics to implementation of a widely disseminated skin cancer prevention program. Methods A multilevel analysis was conducted using data from the Pool Cool Diffusion Trial from 2004 and replicated with data from 2005. Implementation of Pool Cool by lifeguards was measured using a composite score (implementation variable, range 0 to 10 that assessed whether the lifeguard performed different components of the intervention. Predictors included lifeguard background characteristics, lifeguard sun protection-related attitudes and behaviors, pool characteristics, and enhanced (i.e., more technical assistance, tailored materials, and incentives are provided versus basic treatment group. Results The mean value of the implementation variable was 4 in both years (2004 and 2005; SD = 2 in 2004 and SD = 3 in 2005 indicating a moderate implementation for most lifeguards. Several individual-level (lifeguard characteristics and setting-level (pool characteristics and treatment group factors were found to be significantly associated with implementation of Pool Cool by lifeguards. All three lifeguard-level domains (lifeguard background characteristics, lifeguard sun protection-related attitudes and behaviors and six pool-level predictors (number of weekly pool visitors, intervention intensity, geographic latitude, pool location, sun safety and/or skin cancer prevention programs, and sun safety programs and policies were included in the final model. The most important predictors of implementation were the number of weekly pool visitors (inverse association and enhanced treatment group (positive association. That is, pools with fewer weekly visitors and pools in the enhanced

  6. Prediction of atherosclerotic cardiovascular disease mortality in a nationally representative cohort using a set of risk factors from pooled cohort risk equations.

    Directory of Open Access Journals (Sweden)

    Zefeng Zhang

    Full Text Available The American College of Cardiology/American Heart Association developed Pooled Cohort equations to estimate atherosclerotic cardiovascular disease (ASCVD risk. It is unclear how well the equations predict ASCVD mortality in a nationally representative cohort. We used the National Health and Nutrition Examination Survey (NHANES 1988-1994 and Linked Mortality through 2006 (n = 6,644. Among participants aged 40-79 years without ASCVD at baseline, we used Cox proportional hazard models to estimate the 10-year probability of ASCVD death by sex and race-ethnicity (non-Hispanic white (NHW, non-Hispanic black (NHB and Mexican American (MA. We estimated the discrimination and calibration for each sex-race-ethnicity model. We documented 288 ASCVD deaths during 62,335 person years. The Pooled Cohort equations demonstrated moderate to good discrimination for ASCVD mortality, with modified C-statistics of 0.716 (95% CI 0.663-0.770, 0.794 (0.734-0.854, and 0.733 (0.654-0.811 for NHW, NHB and MA men, respectively. The corresponding C-statistics for women were 0.781 (0.718-0.844, 0.702 (0.633-0.771, and 0.789 (CI 0.721-0.857. Modified Hosmer-Lemeshow χ2 suggested adequate calibration for NHW, NHB and MA men, and MA women (p-values: 0.128, 0.295, 0.104 and 0.163 respectively. The calibration was inadequate for NHW and NHB women (p<0.05. In this nationally representative cohort, the Pooled Cohort equations performed adequately to predict 10-year ASCVD mortality for NHW and NHB men, and MA population, but not for NHW and NHB women.

  7. Classification of Normal and Apoptotic Cells from Fluorescence Microscopy Images Using Generalized Polynomial Chaos and Level Set Function.

    Science.gov (United States)

    Du, Yuncheng; Budman, Hector M; Duever, Thomas A

    2016-06-01

    Accurate automated quantitative analysis of living cells based on fluorescence microscopy images can be very useful for fast evaluation of experimental outcomes and cell culture protocols. In this work, an algorithm is developed for fast differentiation of normal and apoptotic viable Chinese hamster ovary (CHO) cells. For effective segmentation of cell images, a stochastic segmentation algorithm is developed by combining a generalized polynomial chaos expansion with a level set function-based segmentation algorithm. This approach provides a probabilistic description of the segmented cellular regions along the boundary, from which it is possible to calculate morphological changes related to apoptosis, i.e., the curvature and length of a cell's boundary. These features are then used as inputs to a support vector machine (SVM) classifier that is trained to distinguish between normal and apoptotic viable states of CHO cell images. The use of morphological features obtained from the stochastic level set segmentation of cell images in combination with the trained SVM classifier is more efficient in terms of differentiation accuracy as compared with the original deterministic level set method.

  8. Comparison of different statistical methods for estimation of extreme sea levels with wave set-up contribution

    Science.gov (United States)

    Kergadallan, Xavier; Bernardara, Pietro; Benoit, Michel; Andreewsky, Marc; Weiss, Jérôme

    2013-04-01

    Estimating the probability of occurrence of extreme sea levels is a central issue for the protection of the coast. Return periods of sea level with wave set-up contribution are estimated here in one site : Cherbourg in France in the English Channel. The methodology follows two steps : the first one is computation of joint probability of simultaneous wave height and still sea level, the second one is interpretation of that joint probabilities to assess a sea level for a given return period. Two different approaches were evaluated to compute joint probability of simultaneous wave height and still sea level : the first one is multivariate extreme values distributions of logistic type in which all components of the variables become large simultaneously, the second one is conditional approach for multivariate extreme values in which only one component of the variables have to be large. Two different methods were applied to estimate sea level with wave set-up contribution for a given return period : Monte-Carlo simulation in which estimation is more accurate but needs higher calculation time and classical ocean engineering design contours of type inverse-FORM in which the method is simpler and allows more complex estimation of wave setup part (wave propagation to the coast for example). We compare results from the two different approaches with the two different methods. To be able to use both Monte-Carlo simulation and design contours methods, wave setup is estimated with an simple empirical formula. We show advantages of the conditional approach compared to the multivariate extreme values approach when extreme sea-level occurs when either surge or wave height is large. We discuss the validity of the ocean engineering design contours method which is an alternative when computation of sea levels is too complex to use Monte-Carlo simulation method.

  9. Equating, or Correction for Between-Block Effects with Application to Body Fluid LC-MS and NMR Metabolomics Data Sets

    NARCIS (Netherlands)

    Draisma, H.H.M.; Reijmers, Th.H.; van der Kloet, F.; Bobeldijk-Pastorova, I; Spies-Faber, E.; Vogels, J.; Meulman, J.J.; Boomsma, D.I.; van der Greef, J.; Hankemeier, T.

    2010-01-01

    Combination of data sets from different objects (for example, from two groups of healthy volunteers from the same population) that were measured on a common set of variables (for example, metabolites or peptides) is desirable for statistical analysis in "omics" studies because it increases power.

  10. Single-step reinitialization and extending algorithms for level-set based multi-phase flow simulations

    Science.gov (United States)

    Fu, Lin; Hu, Xiangyu Y.; Adams, Nikolaus A.

    2017-12-01

    We propose efficient single-step formulations for reinitialization and extending algorithms, which are critical components of level-set based interface-tracking methods. The level-set field is reinitialized with a single-step (non iterative) "forward tracing" algorithm. A minimum set of cells is defined that describes the interface, and reinitialization employs only data from these cells. Fluid states are extrapolated or extended across the interface by a single-step "backward tracing" algorithm. Both algorithms, which are motivated by analogy to ray-tracing, avoid multiple block-boundary data exchanges that are inevitable for iterative reinitialization and extending approaches within a parallel-computing environment. The single-step algorithms are combined with a multi-resolution conservative sharp-interface method and validated by a wide range of benchmark test cases. We demonstrate that the proposed reinitialization method achieves second-order accuracy in conserving the volume of each phase. The interface location is invariant to reapplication of the single-step reinitialization. Generally, we observe smaller absolute errors than for standard iterative reinitialization on the same grid. The computational efficiency is higher than for the standard and typical high-order iterative reinitialization methods. We observe a 2- to 6-times efficiency improvement over the standard method for serial execution. The proposed single-step extending algorithm, which is commonly employed for assigning data to ghost cells with ghost-fluid or conservative interface interaction methods, shows about 10-times efficiency improvement over the standard method while maintaining same accuracy. Despite their simplicity, the proposed algorithms offer an efficient and robust alternative to iterative reinitialization and extending methods for level-set based multi-phase simulations.

  11. Ionization equilibrium and equation of state in the solar interior

    International Nuclear Information System (INIS)

    Rogers, F.J.

    1984-01-01

    Many-body formulations of the equations of state are restated as a set of Saha-like equations. It is shown that the resulting equations are unique and convergent. These equations are similar to the usual Saha equations to the order of the Debye-Huckel theory. Higher order corrections, however, require a more general formulation. It is demonstrated that the positive free energy resulting from the interaction of unscreened particles in high orbits depletes the occupation of these states, without the introduction of shifted energy levels

  12. Gaussian Plume Model Parameters for Ground-Level and Elevated Sources Derived from the Atmospheric Diffusion Equation in the Neutral and Stable Conditions

    International Nuclear Information System (INIS)

    Essa, K.S.M.

    2009-01-01

    The analytical solution of the atmospheric diffusion equation for a point source gives the ground-level concentration profiles. It depends on the wind speed ua nd vertical dispersion coefficient σ z expressed by Pasquill power laws. Both σ z and u are functions of downwind distance, stability and source elevation, while for the ground-level emission u is constant. In the neutral and stable conditions, the Gaussian plume model and finite difference numerical methods with wind speed in power law and the vertical dispersion coefficient in exponential law are estimated. This work shows that the estimated ground-level concentrations of the Gaussian model for high-level source and numerical finite difference method are very match fit to the observed ground-level concentrations of the Gaussian model

  13. Bud development, flowering and fruit set of Moringa oleifera Lam. (Horseradish Tree as affected by various irrigation levels

    Directory of Open Access Journals (Sweden)

    Quintin Ernst Muhl

    2013-12-01

    Full Text Available Moringa oleifera is becoming increasingly popular as an industrial crop due to its multitude of useful attributes as water purifier, nutritional supplement and biofuel feedstock. Given its tolerance to sub-optimal growing conditions, most of the current and anticipated cultivation areas are in medium to low rainfall areas. This study aimed to assess the effect of various irrigation levels on floral initiation, flowering and fruit set. Three treatments namely, a 900 mm (900IT, 600 mm (600IT and 300 mm (300IT per annum irrigation treatment were administered through drip irrigation, simulating three total annual rainfall amounts. Individual inflorescences from each treatment were tagged during floral initiation and monitored throughout until fruit set. Flower bud initiation was highest at the 300IT and lowest at the 900IT for two consecutive growing seasons. Fruit set on the other hand, decreased with the decrease in irrigation treatment. Floral abortion, reduced pollen viability as well as moisture stress in the style were contributing factors to the reduction in fruiting/yield observed at the 300IT. Moderate water stress prior to floral initiation could stimulate flower initiation, however, this should be followed by sufficient irrigation to ensure good pollination, fruit set and yield.

  14. Improving district level health planning and priority setting in Tanzania through implementing accountability for reasonableness framework: Perceptions of stakeholders.

    Science.gov (United States)

    Maluka, Stephen; Kamuzora, Peter; San Sebastián, Miguel; Byskov, Jens; Ndawi, Benedict; Hurtig, Anna-Karin

    2010-12-01

    In 2006, researchers and decision-makers launched a five-year project - Response to Accountable Priority Setting for Trust in Health Systems (REACT) - to improve planning and priority-setting through implementing the Accountability for Reasonableness framework in Mbarali District, Tanzania. The objective of this paper is to explore the acceptability of Accountability for Reasonableness from the perspectives of the Council Health Management Team, local government officials, health workforce and members of user boards and committees. Individual interviews were carried out with different categories of actors and stakeholders in the district. The interview guide consisted of a series of questions, asking respondents to describe their perceptions regarding each condition of the Accountability for Reasonableness framework in terms of priority setting. Interviews were analysed using thematic framework analysis. Documentary data were used to support, verify and highlight the key issues that emerged. Almost all stakeholders viewed Accountability for Reasonableness as an important and feasible approach for improving priority-setting and health service delivery in their context. However, a few aspects of Accountability for Reasonableness were seen as too difficult to implement given the socio-political conditions and traditions in Tanzania. Respondents mentioned: budget ceilings and guidelines, low level of public awareness, unreliable and untimely funding, as well as the limited capacity of the district to generate local resources as the major contextual factors that hampered the full implementation of the framework in their context. This study was one of the first assessments of the applicability of Accountability for Reasonableness in health care priority-setting in Tanzania. The analysis, overall, suggests that the Accountability for Reasonableness framework could be an important tool for improving priority-setting processes in the contexts of resource-poor settings

  15. Volume integral equation for electromagnetic scattering: Rigorous derivation and analysis for a set of multilayered particles with piecewise-smooth boundaries in a passive host medium

    Science.gov (United States)

    Yurkin, Maxim A.; Mishchenko, Michael I.

    2018-04-01

    We present a general derivation of the frequency-domain volume integral equation (VIE) for the electric field inside a nonmagnetic scattering object from the differential Maxwell equations, transmission boundary conditions, radiation condition at infinity, and locally-finite-energy condition. The derivation applies to an arbitrary spatially finite group of particles made of isotropic materials and embedded in a passive host medium, including those with edges, corners, and intersecting internal interfaces. This is a substantially more general type of scatterer than in all previous derivations. We explicitly treat the strong singularity of the integral kernel, but keep the entire discussion accessible to the applied scattering community. We also consider the known results on the existence and uniqueness of VIE solution and conjecture a general sufficient condition for that. Finally, we discuss an alternative way of deriving the VIE for an arbitrary object by means of a continuous transformation of the everywhere smooth refractive-index function into a discontinuous one. Overall, the paper examines and pushes forward the state-of-the-art understanding of various analytical aspects of the VIE.

  16. Reduced Braginskii equations

    Energy Technology Data Exchange (ETDEWEB)

    Yagi, M. [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Horton, W. [Texas Univ., Austin, TX (United States). Inst. for Fusion Studies

    1993-11-01

    A set of reduced Braginskii equations is derived without assuming flute ordering and the Boussinesq approximation. These model equations conserve the physical energy. It is crucial at finite {beta} that we solve the perpendicular component of Ohm`s law to conserve the physical energy while ensuring the relation {del} {center_dot} j = 0.

  17. Reduced Braginskii equations

    International Nuclear Information System (INIS)

    Yagi, M.; Horton, W.

    1993-11-01

    A set of reduced Braginskii equations is derived without assuming flute ordering and the Boussinesq approximation. These model equations conserve the physical energy. It is crucial at finite β that we solve the perpendicular component of Ohm's law to conserve the physical energy while ensuring the relation ∇ · j = 0

  18. Reduced Braginskii equations

    International Nuclear Information System (INIS)

    Yagi, M.; Horton, W.

    1994-01-01

    A set of reduced Braginskii equations is derived without assuming flute ordering and the Boussinesq approximation. These model equations conserve the physical energy. It is crucial at finite β that the perpendicular component of Ohm's law be solved to ensure ∇·j=0 for energy conservation

  19. Model Compaction Equation

    African Journals Online (AJOL)

    The currently proposed model compaction equation was derived from data sourced from the. Niger Delta and it relates porosity to depth for sandstones under hydrostatic pressure condition. The equation is useful in predicting porosity and compaction trend in hydrostatic sands of the. Niger Delta. GEOLOGICAL SETTING OF ...

  20. Introduction to the level-set full field modeling of laths spheroidization phenomenon in α/β titanium alloys

    Directory of Open Access Journals (Sweden)

    Polychronopoulou D.

    2016-01-01

    Full Text Available Fragmentation of α lamellae and subsequent spheroidization of α laths in α/β titanium alloys occurring during and after deformation are well known phenomena. We will illustrate the development of a new finite element methodology to model them. This new methodology is based on a level set framework to model the deformation and the ad hoc simultaneous and/or subsequent interfaces kinetics. We will focus, at yet, on the modeling of the surface diffusion at the α/β phase interfaces and the motion by mean curvature at the α/α grain interfaces.

  1. Novel room-temperature-setting phosphate ceramics for stabilizing combustion products and low-level mixed wastes

    International Nuclear Information System (INIS)

    Wagh, A.S.; Singh, D.

    1994-01-01

    Argonne National Laboratory, with support from the Office of Technology in the US Department of Energy (DOE), has developed a new process employing novel, chemically bonded ceramic materials to stabilize secondary waste streams. Such waste streams result from the thermal processes used to stabilize low-level, mixed wastes. The process will help the electric power industry treat its combustion and low-level mixed wastes. The ceramic materials are strong, dense, leach-resistant, and inexpensive to fabricate. The room-temperature-setting process allows stabilization of volatile components containing lead, mercury, cadmium, chromium, and nickel. The process also provides effective stabilization of fossil fuel combustion products. It is most suitable for treating fly and bottom ashes

  2. Automated volume analysis of head and neck lesions on CT scans using 3D level set segmentation

    International Nuclear Information System (INIS)

    Street, Ethan; Hadjiiski, Lubomir; Sahiner, Berkman; Gujar, Sachin; Ibrahim, Mohannad; Mukherji, Suresh K.; Chan, Heang-Ping

    2007-01-01

    The authors have developed a semiautomatic system for segmentation of a diverse set of lesions in head and neck CT scans. The system takes as input an approximate bounding box, and uses a multistage level set to perform the final segmentation. A data set consisting of 69 lesions marked on 33 scans from 23 patients was used to evaluate the performance of the system. The contours from automatic segmentation were compared to both 2D and 3D gold standard contours manually drawn by three experienced radiologists. Three performance metric measures were used for the comparison. In addition, a radiologist provided quality ratings on a 1 to 10 scale for all of the automatic segmentations. For this pilot study, the authors observed that the differences between the automatic and gold standard contours were larger than the interobserver differences. However, the system performed comparably to the radiologists, achieving an average area intersection ratio of 85.4% compared to an average of 91.2% between two radiologists. The average absolute area error was 21.1% compared to 10.8%, and the average 2D distance was 1.38 mm compared to 0.84 mm between the radiologists. In addition, the quality rating data showed that, despite the very lax assumptions made on the lesion characteristics in designing the system, the automatic contours approximated many of the lesions very well

  3. Simulation to aid in interpreting biological relevance and setting of population-level protection goals for risk assessment of pesticides.

    Science.gov (United States)

    Topping, Christopher John; Luttik, Robert

    2017-10-01

    Specific protection goals (SPGs) comprise an explicit expression of the environmental components that need protection and the maximum impacts that can be tolerated. SPGs are set by risk managers and are typically based on protecting populations or functions. However, the measurable endpoints available to risk managers, at least for vertebrates, are typically laboratory tests. We demonstrate, using the example of eggshell thinning in skylarks, how simulation can be used to place laboratory endpoints in context of population-level effects as an aid to setting the SPGs. We develop explanatory scenarios investigating the impact of different assumptions of eggshell thinning on skylark population size, density and distribution in 10 Danish landscapes, chosen to represent the range of typical Danish agricultural conditions. Landscape and timing of application of the pesticide were found to be the most critical factors to consider in the impact assessment. Consequently, a regulatory scenario of monoculture spring barley with an early spray treatment eliciting the eggshell thinning effect was applied using concentrations eliciting effects of zero to 100% in steps of 5%. Setting the SPGs requires balancing scientific, social and political realities. However, the provision of clear and detailed options such as those from comprehensive simulation results can inform the decision process by improving transparency and by putting the more abstract testing data into the context of real-world impacts. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Level-set reconstruction algorithm for ultrafast limited-angle X-ray computed tomography of two-phase flows.

    Science.gov (United States)

    Bieberle, M; Hampel, U

    2015-06-13

    Tomographic image reconstruction is based on recovering an object distribution from its projections, which have been acquired from all angular views around the object. If the angular range is limited to less than 180° of parallel projections, typical reconstruction artefacts arise when using standard algorithms. To compensate for this, specialized algorithms using a priori information about the object need to be applied. The application behind this work is ultrafast limited-angle X-ray computed tomography of two-phase flows. Here, only a binary distribution of the two phases needs to be reconstructed, which reduces the complexity of the inverse problem. To solve it, a new reconstruction algorithm (LSR) based on the level-set method is proposed. It includes one force function term accounting for matching the projection data and one incorporating a curvature-dependent smoothing of the phase boundary. The algorithm has been validated using simulated as well as measured projections of known structures, and its performance has been compared to the algebraic reconstruction technique and a binary derivative of it. The validation as well as the application of the level-set reconstruction on a dynamic two-phase flow demonstrated its applicability and its advantages over other reconstruction algorithms. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  5. Identification of Arbitrary Zonation in Groundwater Parameters using the Level Set Method and a Parallel Genetic Algorithm

    Science.gov (United States)

    Lei, H.; Lu, Z.; Vesselinov, V. V.; Ye, M.

    2017-12-01

    Simultaneous identification of both the zonation structure of aquifer heterogeneity and the hydrogeological parameters associated with these zones is challenging, especially for complex subsurface heterogeneity fields. In this study, a new approach, based on the combination of the level set method and a parallel genetic algorithm is proposed. Starting with an initial guess for the zonation field (including both zonation structure and the hydraulic properties of each zone), the level set method ensures that material interfaces are evolved through the inverse process such that the total residual between the simulated and observed state variables (hydraulic head) always decreases, which means that the inversion result depends on the initial guess field and the minimization process might fail if it encounters a local minimum. To find the global minimum, the genetic algorithm (GA) is utilized to explore the parameters that define initial guess fields, and the minimal total residual corresponding to each initial guess field is considered as the fitness function value in the GA. Due to the expensive evaluation of the fitness function, a parallel GA is adapted in combination with a simulated annealing algorithm. The new approach has been applied to several synthetic cases in both steady-state and transient flow fields, including a case with real flow conditions at the chromium contaminant site at the Los Alamos National Laboratory. The results show that this approach is capable of identifying the arbitrary zonation structures of aquifer heterogeneity and the hydrogeological parameters associated with these zones effectively.

  6. GSHR, a Web-Based Platform Provides Gene Set-Level Analyses of Hormone Responses in Arabidopsis

    Directory of Open Access Journals (Sweden)

    Xiaojuan Ran

    2018-01-01

    Full Text Available Phytohormones regulate diverse aspects of plant growth and environmental responses. Recent high-throughput technologies have promoted a more comprehensive profiling of genes regulated by different hormones. However, these omics data generally result in large gene lists that make it challenging to interpret the data and extract insights into biological significance. With the rapid accumulation of theses large-scale experiments, especially the transcriptomic data available in public databases, a means of using this information to explore the transcriptional networks is needed. Different platforms have different architectures and designs, and even similar studies using the same platform may obtain data with large variances because of the highly dynamic and flexible effects of plant hormones; this makes it difficult to make comparisons across different studies and platforms. Here, we present a web server providing gene set-level analyses of Arabidopsis thaliana hormone responses. GSHR collected 333 RNA-seq and 1,205 microarray datasets from the Gene Expression Omnibus, characterizing transcriptomic changes in Arabidopsis in response to phytohormones including abscisic acid, auxin, brassinosteroids, cytokinins, ethylene, gibberellins, jasmonic acid, salicylic acid, and strigolactones. These data were further processed and organized into 1,368 gene sets regulated by different hormones or hormone-related factors. By comparing input gene lists to these gene sets, GSHR helped to identify gene sets from the input gene list regulated by different phytohormones or related factors. Together, GSHR links prior information regarding transcriptomic changes induced by hormones and related factors to newly generated data and facilities cross-study and cross-platform comparisons; this helps facilitate the mining of biologically significant information from large-scale datasets. The GSHR is freely available at http://bioinfo.sibs.ac.cn/GSHR/.

  7. Does Vitamin D Sufficiency Equate to a Single Serum 25-Hydroxyvitamin D Level or Are Different Levels Required for Non-Skeletal Diseases?

    Directory of Open Access Journals (Sweden)

    Simon Spedding

    2013-12-01

    Full Text Available Objective: Clarify the concept of vitamin D sufficiency, the relationship between efficacy and vitamin D status and the role of Vitamin D supplementation in the management of non-skeletal diseases. We outline reasons for anticipating different serum vitamin D levels are required for different diseases. Method: Review the literature for evidence of efficacy of supplementation and minimum effective 25-hydroxyvitamin D (25-OHD levels in non-skeletal disease. Results: Evidence of efficacy of vitamin supplementation is graded according to levels of evidence. Minimum effective serum 25-OHD levels are lower for skeletal disease, e.g., rickets (25 nmol/L, osteoporosis and fractures (50 nmol/L, than for premature mortality (75 nmol/L or non-skeletal diseases, e.g., depression (75 nmol/L, diabetes and cardiovascular disease (80 nmol/L, falls and respiratory infections (95 nmol/L and cancer (100 nmol/L. Conclusions: Evidence for the efficacy of vitamin D supplementation at serum 25-OHD levels ranging from 25 to 100 nmol/L has been obtained from trials with vitamin D interventions that change vitamin D status by increasing serum 25-OHD to a level consistent with sufficiency for that disease. This evidence supports the hypothesis that just as vitamin D metabolism is tissue dependent, so the serum levels of 25-OHD signifying deficiency or sufficiency are disease dependent.

  8. ZIP MK 2 : A Fortran code for calculating the eigenvalues (poles and zeros and frequency responses of large sets of linear equations representing complex dynamic systems)

    International Nuclear Information System (INIS)

    Sumner, H.M.

    1969-03-01

    The KDF9/EGDON program ZIP MK 2 is the third of a series of programs for off-line digital computer analysis of dynamic systems: it has been designed specifically to cater for the needs of the design or control engineer in having an input scheme which is minimally computer-oriented. It uses numerical algorithms which are as near fool-proof as the author could discover or devise, and has comprehensive diagnostic sections to help the user in the event of faulty data or machine execution. ZIP MK 2 accepts mathematical models comprising first order linear differential and linear algebraic equations, and from these computes and factorises the transfer functions between specified pairs of output and input variables; if desired, the frequency response may be computed from the computed transfer function. The model input scheme is fully compatible with the frequency response programs FRP MK 1 and MK 2, except that, for ZIP MK 2, transport, or time-delays must be converted by the user to Pade or Bode approximations prior to input. ZIP provides the pole-zero plot, (or complex plane analysis), while FRP provides the frequency response and FIFI the time domain analyses. The pole-zero method of analysis has been little used in the past for complex models, especially where transport delays occur, and one of its primary purposes is as a research tool to investigate the usefulness of this method, for process plant, whether nuclear, chemical or other continuous processes. (author)

  9. Patient- and population-level health consequences of discontinuing antiretroviral therapy in settings with inadequate HIV treatment availability

    Directory of Open Access Journals (Sweden)

    Kimmel April D

    2012-09-01

    Full Text Available Abstract Background In resource-limited settings, HIV budgets are flattening or decreasing. A policy of discontinuing antiretroviral therapy (ART after HIV treatment failure was modeled to highlight trade-offs among competing policy goals of optimizing individual and population health outcomes. Methods In settings with two available ART regimens, we assessed two strategies: (1 continue ART after second-line failure (Status Quo and (2 discontinue ART after second-line failure (Alternative. A computer model simulated outcomes for a single cohort of newly detected, HIV-infected individuals. Projections were fed into a population-level model allowing multiple cohorts to compete for ART with constraints on treatment capacity. In the Alternative strategy, discontinuation of second-line ART occurred upon detection of antiretroviral failure, specified by WHO guidelines. Those discontinuing failed ART experienced an increased risk of AIDS-related mortality compared to those continuing ART. Results At the population level, the Alternative strategy increased the mean number initiating ART annually by 1,100 individuals (+18.7% to 6,980 compared to the Status Quo. More individuals initiating ART under the Alternative strategy increased total life-years by 15,000 (+2.8% to 555,000, compared to the Status Quo. Although more individuals received treatment under the Alternative strategy, life expectancy for those treated decreased by 0.7 years (−8.0% to 8.1 years compared to the Status Quo. In a cohort of treated patients only, 600 more individuals (+27.1% died by 5 years under the Alternative strategy compared to the Status Quo. Results were sensitive to the timing of detection of ART failure, number of ART regimens, and treatment capacity. Although we believe the results robust in the short-term, this analysis reflects settings where HIV case detection occurs late in the disease course and treatment capacity and the incidence of newly detected patients are

  10. An approach for maximizing the smallest eigenfrequency of structure vibration based on piecewise constant level set method

    Science.gov (United States)

    Zhang, Zhengfang; Chen, Weifeng

    2018-05-01

    Maximization of the smallest eigenfrequency of the linearized elasticity system with area constraint is investigated. The elasticity system is extended into a large background domain, but the void is vacuum and not filled with ersatz material. The piecewise constant level set (PCLS) method is applied to present two regions, the original material region and the void region. A quadratic PCLS function is proposed to represent the characteristic function. Consequently, the functional derivative of the smallest eigenfrequency with respect to PCLS function takes nonzero value in the original material region and zero in the void region. A penalty gradient algorithm is proposed, which initializes the whole background domain with the original material and decreases the area of original material region till the area constraint is satisfied. 2D and 3D numerical examples are presented, illustrating the validity of the proposed algorithm.

  11. Efficient globally optimal segmentation of cells in fluorescence microscopy images using level sets and convex energy functionals.

    Science.gov (United States)

    Bergeest, Jan-Philip; Rohr, Karl

    2012-10-01

    In high-throughput applications, accurate and efficient segmentation of cells in fluorescence microscopy images is of central importance for the quantification of protein expression and the understanding of cell function. We propose an approach for segmenting cell nuclei which is based on active contours using level sets and convex energy functionals. Compared to previous work, our approach determines the global solution. Thus, the approach does not suffer from local minima and the segmentation result does not depend on the initialization. We consider three different well-known energy functionals for active contour-based segmentation and introduce convex formulations of these functionals. We also suggest a numeric approach for efficiently computing the solution. The performance of our approach has been evaluated using fluorescence microscopy images from different experiments comprising different cell types. We have also performed a quantitative comparison with previous segmentation approaches. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Computational Fluid Dynamics Analysis of Cold Plasma Plume Mixing with Blood Using Level Set Method Coupled with Heat Transfer

    Directory of Open Access Journals (Sweden)

    Mehrdad Shahmohammadi Beni

    2017-06-01

    Full Text Available Cold plasmas were proposed for treatment of leukemia. In the present work, conceptual designs of mixing chambers that increased the contact between the two fluids (plasma and blood through addition of obstacles within rectangular-block-shaped chambers were proposed and the dynamic mixing between the plasma and blood were studied using the level set method coupled with heat transfer. Enhancement of mixing between blood and plasma in the presence of obstacles was demonstrated. Continuous tracking of fluid mixing with determination of temperature distributions was enabled by the present model, which would be a useful tool for future development of cold plasma devices for treatment of blood-related diseases such as leukemia.

  13. Lectures on partial differential equations

    CERN Document Server

    Petrovsky, I G

    1992-01-01

    Graduate-level exposition by noted Russian mathematician offers rigorous, transparent, highly readable coverage of classification of equations, hyperbolic equations, elliptic equations and parabolic equations. Wealth of commentary and insight invaluable for deepening understanding of problems considered in text. Translated from the Russian by A. Shenitzer.

  14. Effect of culture levels, ultrafiltered retentate addition, total solid levels and heat treatments on quality improvement of buffalo milk plain set yoghurt.

    Science.gov (United States)

    Yadav, Vijesh; Gupta, Vijay Kumar; Meena, Ganga Sahay

    2018-05-01

    Studied the effect of culture (2, 2.5 and 3%), ultrafiltered (UF) retentate addition (0, 11, 18%), total milk solids (13, 13.50, 14%) and heat treatments (80 and 85 °C/30 min) on the change in pH and titratable acidity (TA), sensory scores and rheological parameters of yoghurt. With 3% culture levels, the required TA (0.90% LA) was achieved in minimum 6 h incubation. With an increase in UF retentate addition, there was observed a highly significant decrease in overall acceptability, body and texture and colour and appearance scores, but there was highly significant increase in rheological parameters of yoghurt samples. Yoghurt made from even 13.75% total solids containing nil UF retentate was observed to be sufficiently firm by the sensory panel. Most of the sensory attributes of yoghurt made with 13.50% total solids were significantly better than yoghurt prepared with either 13 or 14% total solids. Standardised milk heated to 85 °C/30 min resulted in significantly better overall acceptability in yoghurt. Overall acceptability of optimised yoghurt was significantly better than a branded market sample. UF retentate addition adversely affected yoghurt quality, whereas optimization of culture levels, totals milk solids and others process parameters noticeably improved the quality of plain set yoghurt with a shelf life of 15 days at 4 °C.

  15. Relationships between structure, process and outcome to assess quality of integrated chronic disease management in a rural South African setting: applying a structural equation model.

    Science.gov (United States)

    Ameh, Soter; Gómez-Olivé, Francesc Xavier; Kahn, Kathleen; Tollman, Stephen M; Klipstein-Grobusch, Kerstin

    2017-03-23

    South Africa faces a complex dual burden of chronic communicable and non-communicable diseases (NCDs). In response, the Integrated Chronic Disease Management (ICDM) model was initiated in primary health care (PHC) facilities in 2011 to leverage the HIV/ART programme to scale-up services for NCDs, achieve optimal patient health outcomes and improve the quality of medical care. However, little is known about the quality of care in the ICDM model. The objectives of this study were to: i) assess patients' and operational managers' satisfaction with the dimensions of ICDM services; and ii) evaluate the quality of care in the ICDM model using Avedis Donabedian's theory of relationships between structure (resources), process (clinical activities) and outcome (desired result of healthcare) constructs as a measure of quality of care. A cross-sectional study was conducted in 2013 in seven PHC facilities in the Bushbuckridge municipality of Mpumalanga Province, north-east South Africa - an area underpinned by a robust Health and Demographic Surveillance System (HDSS). The patient satisfaction questionnaire (PSQ-18), with measures reflecting structure/process/outcome (SPO) constructs, was adapted and administered to 435 chronic disease patients and the operational managers of all seven PHC facilities. The adapted questionnaire contained 17 dimensions of care, including eight dimensions identified as priority areas in the ICDM model - critical drugs, equipment, referral, defaulter tracing, prepacking of medicines, clinic appointments, waiting time, and coherence. A structural equation model was fit to operationalise Donabedian's theory, using unidirectional, mediation, and reciprocal pathways. The mediation pathway showed that the relationships between structure, process and outcome represented quality systems in the ICDM model. Structure correlated with process (0.40) and outcome (0.75). Given structure, process correlated with outcome (0.88). Of the 17 dimensions of care in

  16. The general setting for the zero-flux condition: The lagrangian and zero-flux conditions that give the heisenberg equation of motion.

    Science.gov (United States)

    Anderson, James S M; Ayers, Paul W

    2018-06-30

    Generalizing our recent work on relativistic generalizations of the quantum theory of atoms in molecules, we present the general setting under which the principle of stationary action for a region leads to open quantum subsystems. The approach presented here is general and works for any Hamiltonian, and when a reasonable Lagrangian is selected, it often leads to the integral of the Laplacian of the electron density on the region vanishing as a necessary condition for the zero-flux surface. Alternatively, with this method, one can design a Lagrangian that leads to a surface of interest (though this Lagrangian may not be, and indeed probably will not be, "reasonable"). For any reasonable Lagrangian for the electronic wave function and any two-component method (related by integration by parts to the Hamiltonian) considered, the Bader definition of an atom is recaptured. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.

  17. Evaluating Equating Results: Percent Relative Error for Chained Kernel Equating

    Science.gov (United States)

    Jiang, Yanlin; von Davier, Alina A.; Chen, Haiwen

    2012-01-01

    This article presents a method for evaluating equating results. Within the kernel equating framework, the percent relative error (PRE) for chained equipercentile equating was computed under the nonequivalent groups with anchor test (NEAT) design. The method was applied to two data sets to obtain the PRE, which can be used to measure equating…

  18. Set-up and first operation of a plasma oven for treatment of low level radioactive wastes

    Directory of Open Access Journals (Sweden)

    Nachtrodt Frederik

    2014-01-01

    Full Text Available An experimental device for plasma treatment of low and intermediate level radioactive waste was built and tested in several design variations. The laboratory device is designed with the intention to study the general effects and difficulties in a plasma incineration set-up for the further future development of a larger scale pilot plant. The key part of the device consists of a novel microwave plasma torch driven by 200 W electric power, and operating at atmospheric pressure. It is a specific design characteristic of the torch that a high peak temperature can be reached with a low power input compared to other plasma torches. Experiments have been carried out to analyze the effect of the plasma on materials typical for operational low-level wastes. In some preliminary cold tests the behavior of stable volatile species e. g., caesium was investigated by TXRF measurements of material collected from the oven walls and the filtered off-gas. The results help in improving and scaling up the existing design and in understanding the effects for a pilot plant, especially for the off-gas collection and treatment.

  19. Roothaan’s approach to solve the Hartree-Fock equations for atoms confined by soft walls: Basis set with correct asymptotic behavior

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Bautista, Mariano; Díaz-García, Cecilia; Navarrete-López, Alejandra M.; Vargas, Rubicelia; Garza, Jorge, E-mail: jgo@xanum.uam.mx [Departamento de Química, División de Ciencias Básicas e Ingeniería, Universidad Autónoma Metropolitana-Iztapalapa, San Rafael Atlixco 186, Col. Vicentina, Iztapalapa C. P. 09340, México D. F., México (Mexico)

    2015-07-21

    In this report, we use a new basis set for Hartree-Fock calculations related to many-electron atoms confined by soft walls. One- and two-electron integrals were programmed in a code based in parallel programming techniques. The results obtained with this proposal for hydrogen and helium atoms were contrasted with other proposals to study just one and two electron confined atoms, where we have reproduced or improved the results previously reported. Usually, an atom enclosed by hard walls has been used as a model to study confinement effects on orbital energies, the main conclusion reached by this model is that orbital energies always go up when the confinement radius is reduced. However, such an observation is not necessarily valid for atoms confined by penetrable walls. The main reason behind this result is that for atoms with large polarizability, like beryllium or potassium, external orbitals are delocalized when the confinement is imposed and consequently, the internal orbitals behave as if they were in an ionized atom. Naturally, the shell structure of these atoms is modified drastically when they are confined. The delocalization was an argument proposed for atoms confined by hard walls, but it was never verified. In this work, the confinement imposed by soft walls allows to analyze the delocalization concept in many-electron atoms.

  20. Roothaan's approach to solve the Hartree-Fock equations for atoms confined by soft walls: Basis set with correct asymptotic behavior.

    Science.gov (United States)

    Rodriguez-Bautista, Mariano; Díaz-García, Cecilia; Navarrete-López, Alejandra M; Vargas, Rubicelia; Garza, Jorge

    2015-07-21

    In this report, we use a new basis set for Hartree-Fock calculations related to many-electron atoms confined by soft walls. One- and two-electron integrals were programmed in a code based in parallel programming techniques. The results obtained with this proposal for hydrogen and helium atoms were contrasted with other proposals to study just one and two electron confined atoms, where we have reproduced or improved the results previously reported. Usually, an atom enclosed by hard walls has been used as a model to study confinement effects on orbital energies, the main conclusion reached by this model is that orbital energies always go up when the confinement radius is reduced. However, such an observation is not necessarily valid for atoms confined by penetrable walls. The main reason behind this result is that for atoms with large polarizability, like beryllium or potassium, external orbitals are delocalized when the confinement is imposed and consequently, the internal orbitals behave as if they were in an ionized atom. Naturally, the shell structure of these atoms is modified drastically when they are confined. The delocalization was an argument proposed for atoms confined by hard walls, but it was never verified. In this work, the confinement imposed by soft walls allows to analyze the delocalization concept in many-electron atoms.

  1. An optimized process flow for rapid segmentation of cortical bones of the craniofacial skeleton using the level-set method.

    Science.gov (United States)

    Szwedowski, T D; Fialkov, J; Pakdel, A; Whyne, C M

    2013-01-01

    Accurate representation of skeletal structures is essential for quantifying structural integrity, for developing accurate models, for improving patient-specific implant design and in image-guided surgery applications. The complex morphology of thin cortical structures of the craniofacial skeleton (CFS) represents a significant challenge with respect to accurate bony segmentation. This technical study presents optimized processing steps to segment the three-dimensional (3D) geometry of thin cortical bone structures from CT images. In this procedure, anoisotropic filtering and a connected components scheme were utilized to isolate and enhance the internal boundaries between craniofacial cortical and trabecular bone. Subsequently, the shell-like nature of cortical bone was exploited using boundary-tracking level-set methods with optimized parameters determined from large-scale sensitivity analysis. The process was applied to clinical CT images acquired from two cadaveric CFSs. The accuracy of the automated segmentations was determined based on their volumetric concurrencies with visually optimized manual segmentations, without statistical appraisal. The full CFSs demonstrated volumetric concurrencies of 0.904 and 0.719; accuracy increased to concurrencies of 0.936 and 0.846 when considering only the maxillary region. The highly automated approach presented here is able to segment the cortical shell and trabecular boundaries of the CFS in clinical CT images. The results indicate that initial scan resolution and cortical-trabecular bone contrast may impact performance. Future application of these steps to larger data sets will enable the determination of the method's sensitivity to differences in image quality and CFS morphology.

  2. An analysis on the level changing of UET and SET in blood and urine in early stage of kidney disease caused by diabetes

    International Nuclear Information System (INIS)

    Liu Juzhen; Yang Wenying; Cai Tietie

    2001-01-01

    Objective: To study the relationship between UET and SET variation and early changes of diabetic nephropathy. Methods: UET and SET were measured in 24 patients with diabetes, 19 with early stage diabetic nephropathy, 21 with advanced diabetic nephropathy and 30 normal as contrast. Results: Apparent uprise of UET and SET was observed in all patients when compared to normal contrasts (P 2 -macroglobulin was revealed (P<0.05). Conclusion: UET and SET levels uprose as long as diabetic nephropathy deteriorated. As a result, UET and SET may act as sensitive indices in diagnosing early stage diabetic nephropathy

  3. Robust nuclei segmentation in cyto-histopathological images using statistical level set approach with topology preserving constraint

    Science.gov (United States)

    Taheri, Shaghayegh; Fevens, Thomas; Bui, Tien D.

    2017-02-01

    Computerized assessments for diagnosis or malignancy grading of cyto-histopathological specimens have drawn increased attention in the field of digital pathology. Automatic segmentation of cell nuclei is a fundamental step in such automated systems. Despite considerable research, nuclei segmentation is still a challenging task due noise, nonuniform illumination, and most importantly, in 2D projection images, overlapping and touching nuclei. In most published approaches, nuclei refinement is a post-processing step after segmentation, which usually refers to the task of detaching the aggregated nuclei or merging the over-segmented nuclei. In this work, we present a novel segmentation technique which effectively addresses the problem of individually segmenting touching or overlapping cell nuclei during the segmentation process. The proposed framework is a region-based segmentation method, which consists of three major modules: i) the image is passed through a color deconvolution step to extract the desired stains; ii) then the generalized fast radial symmetry transform is applied to the image followed by non-maxima suppression to specify the initial seed points for nuclei, and their corresponding GFRS ellipses which are interpreted as the initial nuclei borders for segmentation; iii) finally, these nuclei border initial curves are evolved through the use of a statistical level-set approach along with topology preserving criteria for segmentation and separation of nuclei at the same time. The proposed method is evaluated using Hematoxylin and Eosin, and fluorescent stained images, performing qualitative and quantitative analysis, showing that the method outperforms thresholding and watershed segmentation approaches.

  4. Leveling the field: The role of training, safety programs, and knowledge management systems in fostering inclusive field settings

    Science.gov (United States)

    Starkweather, S.; Crain, R.; Derry, K. R.

    2017-12-01

    Knowledge is empowering in all settings, but plays an elevated role in empowering under-represented groups in field research. Field research, particularly polar field research, has deep roots in masculinized and colonial traditions, which can lead to high barriers for women and minorities (e.g. Carey et al., 2016). While recruitment of underrepresented groups into polar field research has improved through the efforts of organizations like the Association of Polar Early Career Scientists (APECS), the experiences and successes of these participants is often contingent on the availability of specialized training opportunities or the quality of explicitly documented information about how to survive Arctic conditions or how to establish successful measurement protocols in harsh environments. In Arctic field research, knowledge is often not explicitly documented or conveyed, but learned through "experience" or informally through ad hoc advice. The advancement of field training programs and knowledge management systems suggest two means for unleashing more explicit forms of knowledge about field work. Examples will be presented along with a case for how they level the playing field and improve the experience of field work for all participants.

  5. Developmental screening tools: feasibility of use at primary healthcare level in low- and middle-income settings.

    Science.gov (United States)

    Fischer, Vinicius Jobim; Morris, Jodi; Martines, José

    2014-06-01

    An estimated 150 million children have a disability. Early identification of developmental disabilities is a high priority for the World Health Organization to allow action to reduce impairments through Gap Action Program on mental health. The study identified the feasibility of using the developmental screening and monitoring tools for children aged 0-3 year(s) by non-specialist primary healthcare providers in low-resource settings. A systematic review of the literature was conducted to identify the tools, assess their psychometric properties, and feasibility of use in low- and middle-income countries (LMICs). Key indicators to examine feasibility in LMICs were derived from a consultation with 23 international experts. We identified 426 studies from which 14 tools used in LMICs were extracted for further examination. Three tools reported adequate psychometric properties and met most of the feasibility criteria. Three tools appear promising for use in identifying and monitoring young children with disabilities at primary healthcare level in LMICs. Further research and development are needed to optimize these tools.

  6. Automatic optimal filament segmentation with sub-pixel accuracy using generalized linear models and B-spline level-sets.

    Science.gov (United States)

    Xiao, Xun; Geyer, Veikko F; Bowne-Anderson, Hugo; Howard, Jonathon; Sbalzarini, Ivo F

    2016-08-01

    Biological filaments, such as actin filaments, microtubules, and cilia, are often imaged using different light-microscopy techniques. Reconstructing the filament curve from the acquired images constitutes the filament segmentation problem. Since filaments have lower dimensionality than the image itself, there is an inherent trade-off between tracing the filament with sub-pixel accuracy and avoiding noise artifacts. Here, we present a globally optimal filament segmentation method based on B-spline vector level-sets and a generalized linear model for the pixel intensity statistics. We show that the resulting optimization problem is convex and can hence be solved with global optimality. We introduce a simple and efficient algorithm to compute such optimal filament segmentations, and provide an open-source implementation as an ImageJ/Fiji plugin. We further derive an information-theoretic lower bound on the filament segmentation error, quantifying how well an algorithm could possibly do given the information in the image. We show that our algorithm asymptotically reaches this bound in the spline coefficients. We validate our method in comprehensive benchmarks, compare with other methods, and show applications from fluorescence, phase-contrast, and dark-field microscopy. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  7. A quantitative evaluation of pleural effusion on computed tomography scans using B-spline and local clustering level set.

    Science.gov (United States)

    Song, Lei; Gao, Jungang; Wang, Sheng; Hu, Huasi; Guo, Youmin

    2017-01-01

    Estimation of the pleural effusion's volume is an important clinical issue. The existing methods cannot assess it accurately when there is large volume of liquid in the pleural cavity and/or the patient has some other disease (e.g. pneumonia). In order to help solve this issue, the objective of this study is to develop and test a novel algorithm using B-spline and local clustering level set method jointly, namely BLL. The BLL algorithm was applied to a dataset involving 27 pleural effusions detected on chest CT examination of 18 adult patients with the presence of free pleural effusion. Study results showed that average volumes of pleural effusion computed using the BLL algorithm and assessed manually by the physicians were 586 ml±339 ml and 604±352 ml, respectively. For the same patient, the volume of the pleural effusion, segmented semi-automatically, was 101.8% ±4.6% of that was segmented manually. Dice similarity was found to be 0.917±0.031. The study demonstrated feasibility of applying the new BLL algorithm to accurately measure the volume of pleural effusion.

  8. SparCLeS: dynamic l₁ sparse classifiers with level sets for robust beard/moustache detection and segmentation.

    Science.gov (United States)

    Le, T Hoang Ngan; Luu, Khoa; Savvides, Marios

    2013-08-01

    Robust facial hair detection and segmentation is a highly valued soft biometric attribute for carrying out forensic facial analysis. In this paper, we propose a novel and fully automatic system, called SparCLeS, for beard/moustache detection and segmentation in challenging facial images. SparCLeS uses the multiscale self-quotient (MSQ) algorithm to preprocess facial images and deal with illumination variation. Histogram of oriented gradients (HOG) features are extracted from the preprocessed images and a dynamic sparse classifier is built using these features to classify a facial region as either containing skin or facial hair. A level set based approach, which makes use of the advantages of both global and local information, is then used to segment the regions of a face containing facial hair. Experimental results demonstrate the effectiveness of our proposed system in detecting and segmenting facial hair regions in images drawn from three databases, i.e., the NIST Multiple Biometric Grand Challenge (MBGC) still face database, the NIST Color Facial Recognition Technology FERET database, and the Labeled Faces in the Wild (LFW) database.

  9. Loosely coupled level sets for retinal layers and drusen segmentation in subjects with dry age-related macular degeneration

    Science.gov (United States)

    Novosel, Jelena; Wang, Ziyuan; de Jong, Henk; Vermeer, Koenraad A.; van Vliet, Lucas J.

    2016-03-01

    Optical coherence tomography (OCT) is used to produce high-resolution three-dimensional images of the retina, which permit the investigation of retinal irregularities. In dry age-related macular degeneration (AMD), a chronic eye disease that causes central vision loss, disruptions such as drusen and changes in retinal layer thicknesses occur which could be used as biomarkers for disease monitoring and diagnosis. Due to the topology disrupting pathology, existing segmentation methods often fail. Here, we present a solution for the segmentation of retinal layers in dry AMD subjects by extending our previously presented loosely coupled level sets framework which operates on attenuation coefficients. In eyes affected by AMD, Bruch's membrane becomes visible only below the drusen and our segmentation framework is adapted to delineate such a partially discernible interface. Furthermore, the initialization stage, which tentatively segments five interfaces, is modified to accommodate the appearance of drusen. This stage is based on Dijkstra's algorithm and combines prior knowledge on the shape of the interface, gradient and attenuation coefficient in the newly proposed cost function. This prior knowledge is incorporated by varying the weights for horizontal, diagonal and vertical edges. Finally, quantitative evaluation of the accuracy shows a good agreement between manual and automated segmentation.

  10. A first course in structural equation modeling

    CERN Document Server

    Raykov, Tenko

    2012-01-01

    In this book, authors Tenko Raykov and George A. Marcoulides introduce students to the basics of structural equation modeling (SEM) through a conceptual, nonmathematical approach. For ease of understanding, the few mathematical formulas presented are used in a conceptual or illustrative nature, rather than a computational one.Featuring examples from EQS, LISREL, and Mplus, A First Course in Structural Equation Modeling is an excellent beginner's guide to learning how to set up input files to fit the most commonly used types of structural equation models with these programs. The basic ideas and methods for conducting SEM are independent of any particular software.Highlights of the Second Edition include: Review of latent change (growth) analysis models at an introductory level Coverage of the popular Mplus program Updated examples of LISREL and EQS A CD that contains all of the text's LISREL, EQS, and Mplus examples.A First Course in Structural Equation Modeling is intended as an introductory book for students...

  11. Automatic abdominal multi-organ segmentation using deep convolutional neural network and time-implicit level sets.

    Science.gov (United States)

    Hu, Peijun; Wu, Fa; Peng, Jialin; Bao, Yuanyuan; Chen, Feng; Kong, Dexing

    2017-03-01

    Multi-organ segmentation from CT images is an essential step for computer-aided diagnosis and surgery planning. However, manual delineation of the organs by radiologists is tedious, time-consuming and poorly reproducible. Therefore, we propose a fully automatic method for the segmentation of multiple organs from three-dimensional abdominal CT images. The proposed method employs deep fully convolutional neural networks (CNNs) for organ detection and segmentation, which is further refined by a time-implicit multi-phase evolution method. Firstly, a 3D CNN is trained to automatically localize and delineate the organs of interest with a probability prediction map. The learned probability map provides both subject-specific spatial priors and initialization for subsequent fine segmentation. Then, for the refinement of the multi-organ segmentation, image intensity models, probability priors as well as a disjoint region constraint are incorporated into an unified energy functional. Finally, a novel time-implicit multi-phase level-set algorithm is utilized to efficiently optimize the proposed energy functional model. Our method has been evaluated on 140 abdominal CT scans for the segmentation of four organs (liver, spleen and both kidneys). With respect to the ground truth, average Dice overlap ratios for the liver, spleen and both kidneys are 96.0, 94.2 and 95.4%, respectively, and average symmetric surface distance is less than 1.3 mm for all the segmented organs. The computation time for a CT volume is 125 s in average. The achieved accuracy compares well to state-of-the-art methods with much higher efficiency. A fully automatic method for multi-organ segmentation from abdominal CT images was developed and evaluated. The results demonstrated its potential in clinical usage with high effectiveness, robustness and efficiency.

  12. Differential equations

    CERN Document Server

    Tricomi, FG

    2013-01-01

    Based on his extensive experience as an educator, F. G. Tricomi wrote this practical and concise teaching text to offer a clear idea of the problems and methods of the theory of differential equations. The treatment is geared toward advanced undergraduates and graduate students and addresses only questions that can be resolved with rigor and simplicity.Starting with a consideration of the existence and uniqueness theorem, the text advances to the behavior of the characteristics of a first-order equation, boundary problems for second-order linear equations, asymptotic methods, and diff

  13. Differential equations

    CERN Document Server

    Barbu, Viorel

    2016-01-01

    This textbook is a comprehensive treatment of ordinary differential equations, concisely presenting basic and essential results in a rigorous manner. Including various examples from physics, mechanics, natural sciences, engineering and automatic theory, Differential Equations is a bridge between the abstract theory of differential equations and applied systems theory. Particular attention is given to the existence and uniqueness of the Cauchy problem, linear differential systems, stability theory and applications to first-order partial differential equations. Upper undergraduate students and researchers in applied mathematics and systems theory with a background in advanced calculus will find this book particularly useful. Supplementary topics are covered in an appendix enabling the book to be completely self-contained.

  14. Study of three-dimensional Rayleigh--Taylor instability in compressible fluids through level set method and parallel computation

    International Nuclear Information System (INIS)

    Li, X.L.

    1993-01-01

    Computation of three-dimensional (3-D) Rayleigh--Taylor instability in compressible fluids is performed on a MIMD computer. A second-order TVD scheme is applied with a fully parallelized algorithm to the 3-D Euler equations. The computational program is implemented for a 3-D study of bubble evolution in the Rayleigh--Taylor instability with varying bubble aspect ratio and for large-scale simulation of a 3-D random fluid interface. The numerical solution is compared with the experimental results by Taylor

  15. Structural Equation Modelling with Three Schemes Estimation of Score Factors on Partial Least Square (Case Study: The Quality Of Education Level SMA/MA in Sumenep Regency)

    Science.gov (United States)

    Anekawati, Anik; Widjanarko Otok, Bambang; Purhadi; Sutikno

    2017-06-01

    Research in education often involves a latent variable. Statistical analysis technique that has the ability to analyze the pattern of relationship among latent variables as well as between latent variables and their indicators is Structural Equation Modeling (SEM). SEM partial least square (PLS) was developed as an alternative if these conditions are met: the theory that underlying the design of the model is weak, does not assume a certain scale measurement, the sample size should not be large and the data does not have the multivariate normal distribution. The purpose of this paper is to compare the results of modeling of the educational quality in high school level (SMA/MA) in Sumenep Regency with structural equation modeling approach partial least square with three schemes estimation of score factors. This paper is a result of explanatory research using secondary data from Sumenep Education Department and Badan Pusat Statistik (BPS) Sumenep which was data of Sumenep in the Figures and the District of Sumenep in the Figures for the year 2015. The unit of observation in this study were districts in Sumenep that consists of 18 districts on the mainland and 9 districts in the islands. There were two endogenous variables and one exogenous variable. Endogenous variables are the quality of education level of SMA/MA (Y1) and school infrastructure (Y2), whereas exogenous variable is socio-economic condition (X1). In this study, There is one improved model which represented by model from path scheme because this model is a consistent, all of its indicators are valid and its the value of R-square increased which is: Y1=0.651Y2. In this model, the quality of education influenced only by the school infrastructure (0.651). The socio-economic condition did not affect neither the school infrastructure nor the quality of education. If the school infrastructure increased 1 point, then the quality of education increased 0.651 point. The quality of education had an R2 of 0

  16. Reduction of infinite dimensional equations

    Directory of Open Access Journals (Sweden)

    Zhongding Li

    2006-02-01

    Full Text Available In this paper, we use the general Legendre transformation to show the infinite dimensional integrable equations can be reduced to a finite dimensional integrable Hamiltonian system on an invariant set under the flow of the integrable equations. Then we obtain the periodic or quasi-periodic solution of the equation. This generalizes the results of Lax and Novikov regarding the periodic or quasi-periodic solution of the KdV equation to the general case of isospectral Hamiltonian integrable equation. And finally, we discuss the AKNS hierarchy as a special example.

  17. The effect of goal setting on fruit and vegetable consumption and physical activity level in a Web-based intervention.

    Science.gov (United States)

    O'Donnell, Stephanie; Greene, Geoffrey W; Blissmer, Bryan

    2014-01-01

    To explore the relationship between goal setting and fruit and vegetable (FV) consumption and physical activity (PA) in an intervention for college students. Secondary data analysis of intervention group participants from a 10-week online intervention with complete weekly data (n = 724). Outcomes (cups of FV per day and minutes of PA per week) and goals for both behaviors were reported online each week. Weekly differences between goals and behaviors were calculated, as well as the proportion meeting individual goals and meeting recommendations for behaviors. There were significant (P goal setting on both behaviors and of goal group (tertile of meeting weekly goals) on behavior, as well as meeting recommendations for both behaviors. There was an increase in FV consumption (P Goal setting as part of a Web-based intervention for college students was effective, but results differed for FV and PA. Goal setting for maintaining behavior may need to differ from goal setting for changing behavior. Copyright © 2014 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  18. Methodology for setting the reference levels in the measurements of the dose rate absorbed in air due to the environmental gamma radiation

    International Nuclear Information System (INIS)

    Dominguez Ley, Orlando; Capote Ferrera, Eduardo; Caveda Ramos, Celia; Alonso Abad, Dolores

    2008-01-01

    Full text: The methodology for setting the reference levels of the measurements of the gamma dose rate absorbed in the air is described. The registration level was obtained using statistical methods. To set the alarm levels, it was necessary to begin with certain affectation level, which activates the investigation operation mode when being reached. It is was necessary to transform this affectation level into values of the indicators selected to set the appearance of an alarm in the network, allowing its direct comparison and at the same time a bigger operability of this one. The affectation level was assumed as an effective dose of 1 mSv/y, which is the international dose limit for public. The conversion factor obtained in a practical way as a consequence of the Chernobyl accident was assumed, converting the value of annual effective dose into values of effective dose rate in air. These factors are the most important in our work, since the main task of the National Network of Environmental Radiological Surveillance of the Republic of Cuba is detecting accidents with a situations regional affectation, and this accident is precisely an example of pollution at this scale. The alarm level setting was based on the results obtained in the first year of the Chernobyl accident. For this purpose, some transformations were achieved. In the final results, a correction factor was introduced depending on the year season the measurement was made. It was taken into account the influence of different meteorological events on the measurement of this indicator. (author)

  19. A web-based study of the relationship of duration of insulin pump infusion set use and fasting blood glucose level in adults with type 1 diabetes.

    Science.gov (United States)

    Sampson Perrin, Alysa J; Guzzetta, Russell C; Miller, Kellee M; Foster, Nicole C; Lee, Anna; Lee, Joyce M; Block, Jennifer M; Beck, Roy W

    2015-05-01

    To evaluate the impact of infusion set use duration on glycemic control, we conducted an Internet-based study using the T1D Exchange's online patient community, Glu ( myGlu.org ). For 14 days, 243 electronically consented adults with type 1 diabetes (T1D) entered online that day's fasting blood glucose (FBG) level, the prior day's total daily insulin (TDI) dose, and whether the infusion set was changed. Mean duration of infusion set use was 3.0 days. Mean FBG level was higher with each successive day of infusion set use, increasing from 126 mg/dL on Day 1 to 133 mg/dL on Day 3 to 147 mg/dL on Day 5 (P<0.001). TDI dose did not vary with increased duration of infusion set use. Internet-based data collection was used to rapidly conduct the study at low cost. The results indicate that FBG levels increase with each additional day of insulin pump infusion set use.

  20. Continuous soil maps - a fuzzy set approach to bridge the gap between aggregation levels of process and distribution models

    NARCIS (Netherlands)

    Gruijter, de J.J.; Walvoort, D.J.J.; Gaans, van P.F.M.

    1997-01-01

    Soil maps as multi-purpose models of spatial soil distribution have a much higher level of aggregation (map units) than the models of soil processes and land-use effects that need input from soil maps. This mismatch between aggregation levels is particularly detrimental in the context of precision

  1. The Level of Vision Necessary for Competitive Performance in Rifle Shooting: Setting the Standards for Paralympic Shooting with Vision Impairment

    NARCIS (Netherlands)

    Allen, P.M.; Latham, K.; Mann, D.L.; Ravensbergen, H.J.C.; Myint, J.

    2016-01-01

    The aim of this study was to investigate the level of vision impairment (VI) that would reduce performance in shooting; to guide development of entry criteria to visually impaired (VI) shooting. Nineteen international-level shooters without VI took part in the study. Participants shot an air rifle,

  2. Bernoulli's Equation

    Indian Academy of Sciences (India)

    regarding nature of forces hold equally for liquids, even though the ... particle. Figure A. A fluid particle is a very small imaginary blob of fluid, here shown sche- matically in .... picture gives important information about the flow field. ... Bernoulli's equation is derived assuming ideal flow, .... weight acting in the flow direction S is.

  3. Relativistic equations

    International Nuclear Information System (INIS)

    Gross, F.

    1986-01-01

    Relativistic equations for two and three body scattering are discussed. Particular attention is paid to relativistic three body kinetics because of recent form factor measurements of the Helium 3 - Hydrogen 3 system recently completed at Saclay and Bates and the accompanying speculation that relativistic effects are important for understanding the three nucleon system. 16 refs., 4 figs

  4. Economic comparison of food, non food crops, set-aside at a regional level with a linear programming model

    International Nuclear Information System (INIS)

    Sourie, J.C.; Hautcolas, J.C.; Blanchet, J.

    1992-01-01

    This paper is concerned with a regional linear programming model. Its purpose is a simulation of the European Economic Community supply of non-food crops at the farm gate according to different sets of European Common Agriculture Policy (CAP) measures. The methodology is first described with a special emphasis on the aggregation problem. The model allows the simultaneous calculation of the impact of non food crops on the farmer's income and on the agricultural budget. The model is then applied to an intensive agricultural region (400 000 ha of arable land). In this region, sugar beet and rape seem the less costly resources, both for the farmers and the CAP taxpayers. An improvement of the economic situation of the two previous agents can be obtained only if a tax exemption on ethanol and rape oil and a subsidy per hactare are allowed. This subsidy can be lower than the set aside premium. (author)

  5. Developmental Screening Tools: Feasibility of Use at Primary Healthcare Level in Low- and Middle-income Settings

    OpenAIRE

    Fischer, Vinicius Jobim; Morris, Jodi; Martines, José

    2014-01-01

    ABSTRACT An estimated 150 million children have a disability. Early identification of developmental disabilities is a high priority for the World Health Organization to allow action to reduce impairments through Gap Action Program on mental health. The study identified the feasibility of using the developmental screening and monitoring tools for children aged 0-3 year(s) by non-specialist primary healthcare providers in low-resource settings. A systematic review of the literature was conducte...

  6. The RISC-V Instruction Set Manual. Volume 1: User-Level ISA, Version 2.0

    Science.gov (United States)

    2014-05-06

    RV128I Base Integer Instruction Set 81 18 Calling Convention 83 18.1 C Datatypes and Alignment...FCVT.D.S, are encoded in the OP-FP major opcode space and both the source and destination are floating-point registers. The rs2 field encodes the datatype ...of the source, and the fmt field encodes the datatype of the destination. FCVT.S.D rounds according to the RM field; FCVT.D.S will never round. 31 27

  7. Singularities of Type-Q ABS Equations

    Directory of Open Access Journals (Sweden)

    James Atkinson

    2011-07-01

    Full Text Available The type-Q equations lie on the top level of the hierarchy introduced by Adler, Bobenko and Suris (ABS in their classification of discrete counterparts of KdV-type integrable partial differential equations. We ask what singularities are possible in the solutions of these equations, and examine the relationship between the singularities and the principal integrability feature of multidimensional consistency. These questions are considered in the global setting and therefore extend previous considerations of singularities which have been local. What emerges are some simple geometric criteria that determine the allowed singularities, and the interesting discovery that generically the presence of singularities leads to a breakdown in the global consistency of such systems despite their local consistency property. This failure to be globally consistent is quantified by introducing a natural notion of monodromy for isolated singularities.

  8. Systematic Equation Formulation

    DEFF Research Database (Denmark)

    Lindberg, Erik

    2007-01-01

    A tutorial giving a very simple introduction to the set-up of the equations used as a model for an electrical/electronic circuit. The aim is to find a method which is as simple and general as possible with respect to implementation in a computer program. The “Modified Nodal Approach”, MNA, and th......, and the “Controlled Source Approach”, CSA, for systematic equation formulation are investigated. It is suggested that the kernel of the P Spice program based on MNA is reprogrammed....

  9. Time-delay equation governing electron motion

    International Nuclear Information System (INIS)

    Cohn, J.

    1976-01-01

    A previously proposed differential-difference equation governing the motion of the classical radiating electron is considered further. A set of three assumptions is offered, under which the proposed equation yields asymptotically stable acceleration

  10. "Notice the Similarities between the Two Sets …": Imperative Usage in a Corpus of Upper-Level Student Papers

    Science.gov (United States)

    Neiderhiser, Justine A.; Kelley, Patrick; Kennedy, Kohlee M.; Swales, John M.; Vergaro, Carla

    2016-01-01

    The sparse literature on the use of imperatives in research papers suggests that they are relatively common in a small number of disciplines, but rare, if used at all, in others. The present study addresses the use of imperatives in a corpus of upper-level A-graded student papers from 16 disciplines. A total of 822 papers collected within the past…

  11. Tails from previous exposures: a general problem in setting reference levels for the assessment of internal contamination

    International Nuclear Information System (INIS)

    Breuer, F.; Frittelli, L.

    1988-01-01

    Reference levels for retention and excretion are evaluated for routine and special monitoring following the intake of a fraction of ICRP annual limits (ALIs) or of a unit activity. Methodologies are also suggested for taking into account the contribution by previous intakes to excretion or retention

  12. The Level of Vision Necessary for Competitive Performance in Rifle Shooting: Setting the Standards for Paralympic Shooting with Vision Impairment.

    Science.gov (United States)

    Allen, Peter M; Latham, Keziah; Mann, David L; Ravensbergen, Rianne H J C; Myint, Joy

    2016-01-01

    The aim of this study was to investigate the level of vision impairment (VI) that would reduce performance in shooting; to guide development of entry criteria to visually impaired (VI) shooting. Nineteen international-level shooters without VI took part in the study. Participants shot an air rifle, while standing, toward a regulation target placed at the end of a 10 m shooting range. Cambridge simulation glasses were used to simulate six different levels of VI. Visual acuity (VA) and contrast sensitivity (CS) were assessed along with shooting performance in each of seven conditions of simulated impairment and compared to that with habitual vision. Shooting performance was evaluated by calculating each individual's average score in every level of simulated VI and normalizing this score by expressing it as a percentage of the baseline performance achieved with habitual vision. Receiver Operating Characteristic curves were constructed to evaluate the ability of different VA and CS cut-off criteria to appropriately classify these athletes as achieving 'expected' or 'below expected' shooting results based on their performance with different levels of VA and CS. Shooting performance remained relatively unaffected by mild decreases in VA and CS, but quickly deteriorated with more moderate losses. The ability of visual function measurements to classify shooting performance was good, with 78% of performances appropriately classified using a cut-off of 0.53 logMAR and 74% appropriately classified using a cut-off of 0.83 logCS. The current inclusion criteria for VI shooting (1.0 logMAR) is conservative, maximizing the chance of including only those with an impairment that does impact performance, but potentially excluding some who do have a genuine impairment in the sport. A lower level of impairment would include more athletes who do have a genuine impairment but would potentially include those who do not actually have an impairment that impacts performance in the sport. An

  13. The Level of Vision Necessary for Competitive Performance in Rifle Shooting: Setting the Standards for Paralympic Shooting With Vision Impairment

    Directory of Open Access Journals (Sweden)

    Peter M Allen

    2016-11-01

    Full Text Available The aim of this study was to investigate the level of vision impairment that would reduce performance in shooting; to guide development of entry criteria to visually impaired (VI shooting. Nineteen international-level shooters without vision impairment took part in the study. Participants shot an air rifle, while standing, towards a regulation target placed at the end of a 10m shooting range. Cambridge simulation glasses were used to simulate six different levels of vision impairment. Visual acuity (VA and contrast sensitivity (CS were assessed along with shooting performance in each of seven conditions of simulated impairment and compared to that with habitual vision. Shooting performance was evaluated by calculating each individual’s average score in every level of simulated vision impairment and normalising this score by expressing it as a percentage of the baseline performance achieved with habitual vision. Receiver Operating Characteristic (ROC curves were constructed to evaluate the ability of different VA and CS cut-off criteria to appropriately classify these athletes as achieving ‘expected’ or ‘below expected’ shooting results based on their performance with different levels of VA and CS. Shooting performance remained relatively unaffected by mild decreases in VA and CS, but quickly deteriorated with more moderate losses. The ability of visual function measurements to classify shooting performance was good, with 78% of performances appropriately classified using a cut-off of 0.53 logMAR and 74% appropriately classified using a cut-off of 0.83 logCS. The current inclusion criteria for VI shooting (1.0 logMAR is conservative, maximising the chance of including only those with an impairment that does impact performance, but potentially excluding some who do have a genuine impairment in the sport. A lower level of impairment would include more athletes who do have a genuine impairment but would potentially include those who do not

  14. Serum cystatin C levels in preterm newborns in our setting: Correlation with serum creatinine and preterm pathologies.

    Science.gov (United States)

    Bardallo Cruzado, Leonor; Pérez González, Elena; Martínez Martos, Zoraima; Bermudo Guitarte, Carmen; Granero Asencio, Mercedes; Luna Lagares, Salud; Marín Patón, Mariano; Polo Padilla, Juan

    2015-01-01

    Cystatin C (CysC) is a renal function marker that is not as influenced as creatinine (Cr) by endogenous or exogenous agents, so it is therefore proposed as a marker in preterm infants. To determine serum CysC values in preterm infants during the first week of life, compared to Cr. To analyze alterations caused by prematurity diseases. The design involved a longitudinal, observational study of prospective cohorts. Groups were based on gestational age (GA): Group A (24-27 weeks), Group B (28-33 weeks), Group C (34-36 weeks). Blood samples were collected at birth, within 48-72hours and after 7 days of life. SPSS v.20 software was used. The statistical methods applied included chi-squared test and ANOVA. A total of 109 preterm infants were included in the study. CysC levels were: 1.54mg/L (±0.28) at birth; 1.38mg/L (±0.36) within 48-72hours of life; 1.50mg/L (±0.31) after 7 days (p<0.05). Cr levels were: 0.64mg/dL (±0.17) at birth; 0.64mg/dL (±0.28) within 48-72hours; 0.56mg/dL (±0.19) after 7 days (P<.05). CysC values were lower in hypotensive patients and those with a respiratory disease (P<.05), and no alterations associated with other diseases were observed. There were no differences in Cr levels associated with any disease. Creatinine levels were higher in patients ≤1.500g (P<.05). Serum CysC decreased within 48-72hours of life, and this decline showed significance (P<.05). The levels increased after 7 days in all 3 GA groups, and there was no difference in CysC levels among the groups. More studies in preterm infants with hypotension and respiratory disease are required. CysC is a better glomerular filtration (GF) marker in ≤1.500g preterm infants. Copyright © 2015 The Authors. Published by Elsevier España, S.L.U. All rights reserved.

  15. Development of a working set of waste package performance criteria for deepsea disposal of low-level radioactive waste. Final report

    International Nuclear Information System (INIS)

    Columbo, P.; Fuhrmann, M.; Neilson, R.M. Jr; Sailor, V.L.

    1982-11-01

    The United States ocean dumping regulations developed pursuant to PL92-532, the Marine Protection, Research, and Sanctuaries Act of 1972, as amended, provide for a general policy of isolation and containment of low-level radioactive waste after disposal into the ocean. In order to determine whether any particular waste packaging system is adequate to meet this general requirement, it is necessary to establish a set of performance criteria against which to evaluate a particular packaging system. These performance criteria must present requirements for the behavior of the waste in combination with its immobilization agent and outer container in a deepsea environment. This report presents a working set of waste package performance criteria, and includes a glossary of terms, characteristics of low-level radioactive waste, radioisotopes of importance in low-level radioactive waste, and a summary of domestic and international regulations which control the ocean disposal of these wastes

  16. The politics of agenda setting at the global level: key informant interviews regarding the International Labour Organization Decent Work Agenda.

    Science.gov (United States)

    Di Ruggiero, Erica; Cohen, Joanna E; Cole, Donald C

    2014-07-01

    Global labour markets continue to undergo significant transformations resulting from socio-political instability combined with rises in structural inequality, employment insecurity, and poor working conditions. Confronted by these challenges, global institutions are providing policy guidance to protect and promote the health and well-being of workers. This article provides an account of how the International Labour Organization's Decent Work Agenda contributes to the work policy agendas of the World Health Organization and the World Bank. This qualitative study involved semi-structured interviews with representatives from three global institutions--the International Labour Organization (ILO), the World Health Organization and the World Bank. Of the 25 key informants invited to participate, 16 took part in the study. Analysis for key themes was followed by interpretation using selected agenda setting theories. Interviews indicated that through the Decent Work Agenda, the International Labour Organization is shaping the global policy narrative about work among UN agencies, and that the pursuit of decent work and the Agenda were perceived as important goals with the potential to promote just policies. The Agenda was closely linked to the World Health Organization's conception of health as a human right. However, decent work was consistently identified by World Bank informants as ILO terminology in contrast to terms such as job creation and job access. The limited evidence base and its conceptual nature were offered as partial explanations for why the Agenda has yet to fully influence other global institutions. Catalytic events such as the economic crisis were identified as creating the enabling conditions to influence global work policy agendas. Our evidence aids our understanding of how an issue like decent work enters and stays on the policy agendas of global institutions, using the Decent Work Agenda as an illustrative example. Catalytic events and policy

  17. The politics of agenda setting at the global level: key informant interviews regarding the International Labour Organization Decent Work Agenda

    Science.gov (United States)

    2014-01-01

    Background Global labour markets continue to undergo significant transformations resulting from socio-political instability combined with rises in structural inequality, employment insecurity, and poor working conditions. Confronted by these challenges, global institutions are providing policy guidance to protect and promote the health and well-being of workers. This article provides an account of how the International Labour Organization’s Decent Work Agenda contributes to the work policy agendas of the World Health Organization and the World Bank. Methods This qualitative study involved semi-structured interviews with representatives from three global institutions – the International Labour Organization (ILO), the World Health Organization and the World Bank. Of the 25 key informants invited to participate, 16 took part in the study. Analysis for key themes was followed by interpretation using selected agenda setting theories. Results Interviews indicated that through the Decent Work Agenda, the International Labour Organization is shaping the global policy narrative about work among UN agencies, and that the pursuit of decent work and the Agenda were perceived as important goals with the potential to promote just policies. The Agenda was closely linked to the World Health Organization’s conception of health as a human right. However, decent work was consistently identified by World Bank informants as ILO terminology in contrast to terms such as job creation and job access. The limited evidence base and its conceptual nature were offered as partial explanations for why the Agenda has yet to fully influence other global institutions. Catalytic events such as the economic crisis were identified as creating the enabling conditions to influence global work policy agendas. Conclusions Our evidence aids our understanding of how an issue like decent work enters and stays on the policy agendas of global institutions, using the Decent Work Agenda as an illustrative

  18. Leveling up: enabling diverse users to locate and effectively use unfamiliar data sets through NCAR's Research Data Archive

    Science.gov (United States)

    Peng, G. S.

    2016-12-01

    Research necessarily expands upon the volume and variety of data used in prior work. Increasingly, investigators look outside their primary areas of expertise for data to incorporate into their research. Locating and using the data that they need, which may be described in terminology from other fields of science or be encoded in unfamiliar data formats, present often insurmountable barriers for potential users. As a data provider of a diverse collection of over 600 atmospheric and oceanic data sets (DS) (http://rda.ucar.edu), we seek to reduce or remove those barriers. Serving a broadening and increasing user base with fixed and finite resources requires automation. Our software harvests metadata descriptors about the data from the data files themselves. Data curators/subject matter experts augment the machine-generated metadata as needed. Metadata powers our data search tools. Users may search for data in a myriad of ways ranging from free text queries to GCMD keywords to faceted searches capable of narrowing down selections by specific criteria. Users are offered customized lists of DSs fitting their criteria with links to DS main information pages that provide detailed information about each DS. Where appropriate, they link to the NCAR Climate Data Guide for expert guidance about strengths and weaknesses of that particular DS. Once users find the data sets they need, we provide modular lessons for common data tasks. The lessons may be data tool install guides, data recipes, blog posts, or short YouTube videos. Rather than overloading users with reams of information, we provide targeted lessons when the user is most receptive, e.g. when they want to use data in an unfamiliar format. We add new material when we discover common points of confusion. Each educational resource is tagged with DS ID numbers so that they are automatically linked with the relevant DSs. How can data providers leverage the work of other data providers? Can a common tagging scheme for data

  19. Generalized Lorentz-Force equations

    International Nuclear Information System (INIS)

    Yamaleev, R.M.

    2001-01-01

    Guided by Nambu (n+1)-dimensional phase space formalism we build a new system of dynamic equations. These equations describe a dynamic state of the corporeal system composed of n subsystems. The dynamic equations are formulated in terms of dynamic variables of the subsystems as well as in terms of dynamic variables of the corporeal system. These two sets of variables are related respectively as roots and coefficients of the n-degree polynomial equation. In the special n=2 case, this formalism reproduces relativistic dynamics for the charged spinning particles

  20. Systems-Level Annotation of a Metabolomics Data Set Reduces 25 000 Features to Fewer than 1000 Unique Metabolites.

    Science.gov (United States)

    Mahieu, Nathaniel G; Patti, Gary J

    2017-10-03

    When using liquid chromatography/mass spectrometry (LC/MS) to perform untargeted metabolomics, it is now routine to detect tens of thousands of features from biological samples. Poor understanding of the data, however, has complicated interpretation and masked the number of unique metabolites actually being measured in an experiment. Here we place an upper bound on the number of unique metabolites detected in Escherichia coli samples analyzed with one untargeted metabolomics method. We first group multiple features arising from the same analyte, which we call "degenerate features", using a context-driven annotation approach. Surprisingly, this analysis revealed thousands of previously unreported degeneracies that reduced the number of unique analytes to ∼2961. We then applied an orthogonal approach to remove nonbiological features from the data using the 13 C-based credentialing technology. This further reduced the number of unique analytes to less than 1000. Our 90% reduction in data is 5-fold greater than previously published studies. On the basis of the results, we propose an alternative approach to untargeted metabolomics that relies on thoroughly annotated reference data sets. To this end, we introduce the creDBle database ( http://creDBle.wustl.edu ), which contains accurate mass, retention time, and MS/MS fragmentation data as well as annotations of all credentialed features.

  1. The Impact of Video Length on Learning in a Middle-Level Flipped Science Setting: Implications for Diversity Inclusion

    Science.gov (United States)

    Slemmons, Krista; Anyanwu, Kele; Hames, Josh; Grabski, Dave; Mlsna, Jeffery; Simkins, Eric; Cook, Perry

    2018-05-01

    Popularity of videos for classroom instruction has increased over the years due to affordability and user-friendliness of today's digital video cameras. This prevalence has led to an increase in flipped, K-12 classrooms countrywide. However, quantitative data establishing the appropriate video length to foster authentic learning is limited, particularly in middle-level classrooms. We focus on this aspect of video technology in two flipped science classrooms at the middle school level to determine the optimal video length to enable learning, increase retention and support student motivation. Our results indicate that while assessments directly following short videos were slightly higher, these findings were not significantly different from scores following longer videos. While short-term retention of material did not seem to be influenced by video length, longer-term retention for males and students with learning disabilities was higher following short videos compared to long as assessed on summative assessments. Students self-report that they were more engaged, had enhanced focus, and had a perceived higher retention of content following shorter videos. This study has important implications for student learning, application of content, and the development of critical thinking skills. This is particularly paramount in an era where content knowledge is just a search engine away.

  2. Global solution branches for a nonlocal Allen-Cahn equation

    Science.gov (United States)

    Kuto, Kousuke; Mori, Tatsuki; Tsujikawa, Tohru; Yotsutani, Shoji

    2018-05-01

    We consider the Neumann problem of a 1D stationary Allen-Cahn equation with nonlocal term. Our previous paper [4] obtained a local branch of asymmetric solutions which bifurcates from a point on the branch of odd-symmetric solutions. This paper derives the global behavior of the branch of asymmetric solutions, and moreover, determines the set of all solutions to the nonlocal Allen-Cahn equation. Our proof is based on a level set analysis for an integral map associated with the nonlocal term.

  3. A browser-based 3D Visualization Tool designed for comparing CERES/CALIOP/CloudSAT level-2 data sets.

    Science.gov (United States)

    Chu, C.; Sun-Mack, S.; Chen, Y.; Heckert, E.; Doelling, D. R.

    2017-12-01

    In Langley NASA, Clouds and the Earth's Radiant Energy System (CERES) and Moderate Resolution Imaging Spectroradiometer (MODIS) are merged with Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) and CloudSat Cloud Profiling Radar (CPR). The CERES merged product (C3M) matches up to three CALIPSO footprints with each MODIS pixel along its ground track. It then assigns the nearest CloudSat footprint to each of those MODIS pixels. The cloud properties from MODIS, retrieved using the CERES algorithms, are included in C3M with the matched CALIPSO and CloudSat products along with radiances from 18 MODIS channels. The dataset is used to validate the CERES retrieved MODIS cloud properties and the computed TOA and surface flux difference using MODIS or CALIOP/CloudSAT retrieved clouds. This information is then used to tune the computed fluxes to match the CERES observed TOA flux. A visualization tool will be invaluable to determine the cause of these large cloud and flux differences in order to improve the methodology. This effort is part of larger effort to allow users to order the CERES C3M product sub-setted by time and parameter as well as the previously mentioned visualization capabilities. This presentation will show a new graphical 3D-interface, 3D-CERESVis, that allows users to view both passive remote sensing satellites (MODIS and CERES) and active satellites (CALIPSO and CloudSat), such that the detailed vertical structures of cloud properties from CALIPSO and CloudSat are displayed side by side with horizontally retrieved cloud properties from MODIS and CERES. Similarly, the CERES computed profile fluxes whether using MODIS or CALIPSO and CloudSat clouds can also be compared. 3D-CERESVis is a browser-based visualization tool that makes uses of techniques such as multiple synchronized cursors, COLLADA format data and Cesium.

  4. Economic evaluation and the Jordan Rational Drug List: an exploratory study of national-level priority setting.

    Science.gov (United States)

    Lafi, Rania; Robinson, Suzanne; Williams, Iestyn

    2012-01-01

    To explore the extent of and barriers to the use of economic evaluation in compiling the Jordan Rational Drug List in the health care system of Jordan. The research reported in this article involved a case study of the Jordan Rational Drug List. Data collection methods included semi-structured interviews with decision makers and analysis of secondary documentary sources. The case study was supplemented by additional interviews with a small number of Jordanian academics involved in the production of economic evaluation. The research found that there was no formal requirement for cost-effectiveness information submitted as part of the decision-making process for the inclusion of new technologies on the Jordan Rational Drug List. Both decision makers and academics suggested that economic evidence was not influential in formulary decisions. This is unusual for national formulary bodies. The study identified a number of barriers that prevent substantive and routine use of economic evaluation. While some of these echo findings of previous studies, others-notably the extent to which the sectional interests of clinical groups and commercial (pharmaceutical) industry exert undue influence over decision making-more obviously result from the specific Jordanian context. Economic evaluation was not found to be influential in the Jordan Rational Drug List. Recommendations for improvement include enhancing capacity in relation to generating, accessing, and/or applying health economic analysis to priority setting decisions. There is a further need to incentivize the use of economic evaluation, and this requires that organizational and structural impediments be removed. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  5. The Influence of Cognitive Reasoning Level, Cognitive Restructuring Ability, Disembedding Ability, Working Memory Capacity, and Prior Knowledge On Students' Performance On Balancing Equations by Inspection.

    Science.gov (United States)

    Staver, John R.; Jacks, Tom

    1988-01-01

    Investigates the influence of five cognitive variables on high school students' performance on balancing chemical equations by inspection. Reports that reasoning, restructuring, and disembedding variables could be a single variable, and that working memory capacity does not influence overall performance. Results of hierarchical regression analysis…

  6. Does industry take the susceptible subpopulation of asthmatic individuals into consideration when setting derived no‐effect levels?

    Science.gov (United States)

    Johansson, Mia K. V.; Johanson, Gunnar; Öberg, Mattias

    2016-01-01

    Abstract Asthma, a chronic respiratory disease, can be aggravated by exposure to certain chemical irritants. The objectives were first to investigate the extent to which experimental observations on asthmatic subjects are taken into consideration in connection with the registration process under the EU REACH regulation, and second, to determine whether asthmatics are provided adequate protection by the derived no‐effect levels (DNELs) for acute inhalation exposure. We identified substances for which experimental data on the pulmonary functions of asthmatics exposed to chemicals under controlled conditions are available. The effect concentrations were then compared with DNELs and other guideline and limit values. As of April 2015, only 2.6% of 269 classified irritants had available experimental data on asthmatics. Fourteen of the 22 identified substances with available data were fully registered under REACH and we retrieved 114 reliable studies related to these. Sixty‐three of these studies, involving nine of the 14 substances, were cited by the REACH registrants. However, only 17 of the 114 studies, involving four substances, were regarded as key studies. Furthermore, many of the DNELs for acute inhalation were higher than estimated effect levels for asthmatics, i.e., lowest observed adverse effect concentrations or no‐observed adverse effect concentrations, indicating low or no safety margin. We conclude that REACH registrants tend to disregard findings on asthmatics when deriving these DNELs. In addition, we found examples of DNELs, particularly among those derived for workers, which likely do not provide adequate protection for asthmatics. Copyright © 2016 The Authors Journal of Applied Toxicology Published by John Wiley & Sons Ltd. PMID:27283874

  7. Electroweak evolution equations

    International Nuclear Information System (INIS)

    Ciafaloni, Paolo; Comelli, Denis

    2005-01-01

    Enlarging a previous analysis, where only fermions and transverse gauge bosons were taken into account, we write down infrared-collinear evolution equations for the Standard Model of electroweak interactions computing the full set of splitting functions. Due to the presence of double logs which are characteristic of electroweak interactions (Bloch-Nordsieck violation), new infrared singular splitting functions have to be introduced. We also include corrections related to the third generation Yukawa couplings

  8. Balancing Chemical Equations.

    Science.gov (United States)

    Savoy, L. G.

    1988-01-01

    Describes a study of students' ability to balance equations. Answers to a test on this topic were analyzed to determine the level of understanding and processes used by the students. Presented is a method to teach this skill to high school chemistry students. (CW)

  9. Equating Multidimensional Tests under a Random Groups Design: A Comparison of Various Equating Procedures

    Science.gov (United States)

    Lee, Eunjung

    2013-01-01

    The purpose of this research was to compare the equating performance of various equating procedures for the multidimensional tests. To examine the various equating procedures, simulated data sets were used that were generated based on a multidimensional item response theory (MIRT) framework. Various equating procedures were examined, including…

  10. Differential Equations Compatible with KZ Equations

    International Nuclear Information System (INIS)

    Felder, G.; Markov, Y.; Tarasov, V.; Varchenko, A.

    2000-01-01

    We define a system of 'dynamical' differential equations compatible with the KZ differential equations. The KZ differential equations are associated to a complex simple Lie algebra g. These are equations on a function of n complex variables z i taking values in the tensor product of n finite dimensional g-modules. The KZ equations depend on the 'dual' variable in the Cartan subalgebra of g. The dynamical differential equations are differential equations with respect to the dual variable. We prove that the standard hypergeometric solutions of the KZ equations also satisfy the dynamical equations. As an application we give a new determinant formula for the coordinates of a basis of hypergeometric solutions

  11. A comparative study on seismic response of two unstable rock slopes within same tectonic setting but different activity level

    Science.gov (United States)

    Kleinbrod, Ulrike; Burjánek, Jan; Hugentobler, Marc; Amann, Florian; Fäh, Donat

    2017-12-01

    In this study, the seismic response of two slope instabilities is investigated with seismic ambient vibration analysis. Two similar sites have been chosen: an active deep-seated slope instability at Cuolm da Vi and the geologically, structurally and morphologically similar, but presently not moving Alp Caschlè slope. Both slopes are located at the upper Vorderrheintal (Canton Graubünden, Switzerland). Ambient vibrations were recorded on both slopes and processed by time-frequency polarization and site-to-reference spectral ratio analysis. The data interpretation shows correlations between degree of disintegration of the rock mass and amplification. However, the ambient vibration analysis conducted, does not allow retrieving a resonance frequency that can be related to the total depth of the instability of Cuolm da Vi. Even though seismic waves can be hardly traced in rock instabilities containing open fractures, it was possible to retrieve a dispersion curve and a velocity profile from the array measurement at Cuolm da Vi due to the high level of disintegration of the rock material down to a depth of about 100 m. From the similar amplification pattern at the two sites, we expect a similar structure, indicating that also the slope at Alp Caschlè was active in the past in a similar manner as Cuolm da Vi. However, a smoother increase of amplification with frequency is observed at Alp Caschlè, which might indicate less disintegration of the rock mass in a particular depth range at this site, when comparing to Cuolm da Vi where a high level of disintegration is observed, resulting from the high activity at the slope. From the frequency-dependent amplification, we can distinguish between two parts within both instabilities, one part showing decreasing disintegration of the rock mass with increasing depth, for the other parts less-fractured blocks are observed. Since the block structures are found in the lower part of the instabilities, they might contribute to the

  12. Level of data quality from Health Management Information Systems in a resources limited setting and its associated factors, eastern Ethiopia

    Directory of Open Access Journals (Sweden)

    Kidist Teklegiorgis

    2016-08-01

    Methods: A cross-sectional study was conducted by using structured questionnaires in Dire Dawa Administration health facilities. All unit and/or department heads from all government health facilities were selected. The data was analysed using STATA version 11. Frequency and percentages were computed to present the descriptive findings. Association between variables was computed using binary logistic regression. Results: Over all data quality was found to be 75.3% in unit and/or departments. Trained staff to fill format, decision based on supervisor directives and department heads seek feedback were significantly associated with data quality and their magnitudes were (AOR = 2.253, 95% CI [1.082, 4.692], (AOR = 2.131, 95% CI [1.073, 4.233] and (AOR = 2.481, 95% CI [1.262, 4.876], respectively. Conclusion: Overall data quality was found to be below the national expectation level. Low data quality was found at health posts compared to health centres and hospitals. There was also a shortage of assigned HIS personnel, separate HIS offices, and assigned budgets for HIS across all units and/or departments.

  13. Partial differential equations

    CERN Document Server

    Sloan, D; Süli, E

    2001-01-01

    /homepage/sac/cam/na2000/index.html7-Volume Set now available at special set price ! Over the second half of the 20th century the subject area loosely referred to as numerical analysis of partial differential equations (PDEs) has undergone unprecedented development. At its practical end, the vigorous growth and steady diversification of the field were stimulated by the demand for accurate and reliable tools for computational modelling in physical sciences and engineering, and by the rapid development of computer hardware and architecture. At the more theoretical end, the analytical insight in

  14. The influence of power and actor relations on priority setting and resource allocation practices at the hospital level in Kenya: a case study.

    Science.gov (United States)

    Barasa, Edwine W; Cleary, Susan; English, Mike; Molyneux, Sassy

    2016-09-30

    Priority setting and resource allocation in healthcare organizations often involves the balancing of competing interests and values in the context of hierarchical and politically complex settings with multiple interacting actor relationships. Despite this, few studies have examined the influence of actor and power dynamics on priority setting practices in healthcare organizations. This paper examines the influence of power relations among different actors on the implementation of priority setting and resource allocation processes in public hospitals in Kenya. We used a qualitative case study approach to examine priority setting and resource allocation practices in two public hospitals in coastal Kenya. We collected data by a combination of in-depth interviews of national level policy makers, hospital managers, and frontline practitioners in the case study hospitals (n = 72), review of documents such as hospital plans and budgets, minutes of meetings and accounting records, and non-participant observations in case study hospitals over a period of 7 months. We applied a combination of two frameworks, Norman Long's actor interface analysis and VeneKlasen and Miller's expressions of power framework to examine and interpret our findings RESULTS: The interactions of actors in the case study hospitals resulted in socially constructed interfaces between: 1) senior managers and middle level managers 2) non-clinical managers and clinicians, and 3) hospital managers and the community. Power imbalances resulted in the exclusion of middle level managers (in one of the hospitals) and clinicians and the community (in both hospitals) from decision making processes. This resulted in, amongst others, perceptions of unfairness, and reduced motivation in hospital staff. It also puts to question the legitimacy of priority setting processes in these hospitals. Designing hospital decision making structures to strengthen participation and inclusion of relevant stakeholders could

  15. Estimation of community-level influenza-associated illness in a low resource rural setting in India.

    Science.gov (United States)

    Saha, Siddhartha; Gupta, Vivek; Dawood, Fatimah S; Broor, Shobha; Lafond, Kathryn E; Chadha, Mandeep S; Rai, Sanjay K; Krishnan, Anand

    2018-01-01

    To estimate rates of community-level influenza-like-illness (ILI) and influenza-associated ILI in rural north India. During 2011, we conducted household-based healthcare utilization surveys (HUS) for any acute medical illness (AMI) in preceding 14days among residents of 28villages of Ballabgarh, in north India. Concurrently, we conducted clinic-based surveillance (CBS) in the area for AMI episodes with illness onset ≤3days and collected nasal and throat swabs for influenza virus testing using real-time polymerase chain reaction. Retrospectively, we applied ILI case definition (measured/reported fever and cough) to HUS and CBS data. We attributed 14days of risk-time per person surveyed in HUS and estimated community ILI rate by dividing the number of ILI cases in HUS by total risk-time. We used CBS data on influenza positivity and applied it to HUS-based community ILI rates by age, month, and clinic type, to estimate the community influenza-associated ILI rates. The HUS of 69,369 residents during the year generated risk-time of 3945 person-years (p-y) and identified 150 (5%, 95%CI: 4-6) ILI episodes (38 ILI episodes/1,000 p-y; 95% CI 32-44). Among 1,372 ILI cases enrolled from clinics, 126 (9%; 95% CI 8-11) had laboratory-confirmed influenza (A (H3N2) = 72; B = 54). After adjusting for age, month, and clinic type, overall influenza-associated ILI rate was 4.8/1,000 p-y; rates were highest among children value of influenza vaccination among target groups.

  16. Diagnostic Cut-Off Levels of Plasma Brain Natriuretic Peptide to Distinguish Left Ventricular Failure in Emergency Setting

    International Nuclear Information System (INIS)

    Hussain, A.; Afridi, F. I.; Lutfi, I. A.

    2014-01-01

    Objective: To determine the diagnostic cut-off values of brain natriuretic (BNP) peptide to establish left ventricular failure in patients presenting with dyspnoea in emergency department. Study Design: Descriptive study. Place and Duration of Study: Ziauddin University Hospital, Karachi, from July to December 2011. Methodology: BNP estimation was done on Axysm analyzer with kit provided by Abbott diagnostics, while the Doppler echocardiography was done on Toshiba style (UICW-660A) using 2.5 MHz and 5.0 MHz probes. Log transformation was done to normalize the original BNP values. A receiver operating curve was plotted to determine the diagnostic cut-off value of BNP which can be used to distinguish CHF from other causes of dyspnoea. Statistical analysis was performed by SPSS version 17. Results: A total of 92 patients presenting with dyspnoea in the emergency department were studied. There were 38/92 (41.3%) males and 54/92 (58.7%) females, and the average age of the study population was 64 A +- 14.1 years. These patients had BNP levels and Doppler echocardiography done. The average BNP was found to be 1117.78 A +- 1445.74 pg/ml. In log transformation, the average was found to be 2.72 A +- 0.58. BNP value of 531 pg/ml was found to be the cut off to distinguish between cardiogenic and non-cardiogenic causes of dyspnoea. Conclusion: BNP value of 531 pg/ml can distinguish CHF from other conditions as a cause of dyspnoea in emergency. (author)

  17. Can we avoid high levels of dose escalation for high-risk prostate cancer in the setting of androgen deprivation?

    Science.gov (United States)

    Shakespeare, Thomas P; Wilcox, Shea W; Aherne, Noel J

    2016-01-01

    Both dose-escalated external beam radiotherapy (DE-EBRT) and androgen deprivation therapy (ADT) improve outcomes in patients with high-risk prostate cancer. However, there is little evidence specifically evaluating DE-EBRT for patients with high-risk prostate cancer receiving ADT, particularly for EBRT doses >74 Gy. We aimed to determine whether DE-EBRT >74 Gy improves outcomes for patients with high-risk prostate cancer receiving long-term ADT. Patients with high-risk prostate cancer were treated on an institutional protocol prescribing 3-6 months neoadjuvant ADT and DE-EBRT, followed by 2 years of adjuvant ADT. Between 2006 and 2012, EBRT doses were escalated from 74 Gy to 76 Gy and then to 78 Gy. We interrogated our electronic medical record to identify these patients and analyzed our results by comparing dose levels. In all, 479 patients were treated with a 68-month median follow-up. The 5-year biochemical disease-free survivals for the 74 Gy, 76 Gy, and 78 Gy groups were 87.8%, 86.9%, and 91.6%, respectively. The metastasis-free survivals were 95.5%, 94.5%, and 93.9%, respectively, and the prostate cancer-specific survivals were 100%, 94.4%, and 98.1%, respectively. Dose escalation had no impact on any outcome in either univariate or multivariate analysis. There was no benefit of DE-EBRT >74 Gy in our cohort of high-risk prostate patients treated with long-term ADT. As dose escalation has higher risks of radiotherapy-induced toxicity, it may be feasible to omit dose escalation beyond 74 Gy in this group of patients. Randomized studies evaluating dose escalation for high-risk patients receiving ADT should be considered.

  18. Quantitative characterization of metastatic disease in the spine. Part I. Semiautomated segmentation using atlas-based deformable registration and the level set method

    International Nuclear Information System (INIS)

    Hardisty, M.; Gordon, L.; Agarwal, P.; Skrinskas, T.; Whyne, C.

    2007-01-01

    Quantitative assessment of metastatic disease in bone is often considered immeasurable and, as such, patients with skeletal metastases are often excluded from clinical trials. In order to effectively quantify the impact of metastatic tumor involvement in the spine, accurate segmentation of the vertebra is required. Manual segmentation can be accurate but involves extensive and time-consuming user interaction. Potential solutions to automating segmentation of metastatically involved vertebrae are demons deformable image registration and level set methods. The purpose of this study was to develop a semiautomated method to accurately segment tumor-bearing vertebrae using the aforementioned techniques. By maintaining morphology of an atlas, the demons-level set composite algorithm was able to accurately differentiate between trans-cortical tumors and surrounding soft tissue of identical intensity. The algorithm successfully segmented both the vertebral body and trabecular centrum of tumor-involved and healthy vertebrae. This work validates our approach as equivalent in accuracy to an experienced user

  19. Equations of mathematical physics

    CERN Document Server

    Tikhonov, A N

    2011-01-01

    Mathematical physics plays an important role in the study of many physical processes - hydrodynamics, elasticity, and electrodynamics, to name just a few. Because of the enormous range and variety of problems dealt with by mathematical physics, this thorough advanced-undergraduate or graduate-level text considers only those problems leading to partial differential equations. The authors - two well-known Russian mathematicians - have focused on typical physical processes and the principal types of equations deailing with them. Special attention is paid throughout to mathematical formulation, ri

  20. Estimation of community-level influenza-associated illness in a low resource rural setting in India.

    Directory of Open Access Journals (Sweden)

    Siddhartha Saha

    Full Text Available To estimate rates of community-level influenza-like-illness (ILI and influenza-associated ILI in rural north India.During 2011, we conducted household-based healthcare utilization surveys (HUS for any acute medical illness (AMI in preceding 14days among residents of 28villages of Ballabgarh, in north India. Concurrently, we conducted clinic-based surveillance (CBS in the area for AMI episodes with illness onset ≤3days and collected nasal and throat swabs for influenza virus testing using real-time polymerase chain reaction. Retrospectively, we applied ILI case definition (measured/reported fever and cough to HUS and CBS data. We attributed 14days of risk-time per person surveyed in HUS and estimated community ILI rate by dividing the number of ILI cases in HUS by total risk-time. We used CBS data on influenza positivity and applied it to HUS-based community ILI rates by age, month, and clinic type, to estimate the community influenza-associated ILI rates.The HUS of 69,369 residents during the year generated risk-time of 3945 person-years (p-y and identified 150 (5%, 95%CI: 4-6 ILI episodes (38 ILI episodes/1,000 p-y; 95% CI 32-44. Among 1,372 ILI cases enrolled from clinics, 126 (9%; 95% CI 8-11 had laboratory-confirmed influenza (A (H3N2 = 72; B = 54. After adjusting for age, month, and clinic type, overall influenza-associated ILI rate was 4.8/1,000 p-y; rates were highest among children <5 years (13; 95% CI: 4-29 and persons≥60 years (11; 95%CI: 2-30.We present a novel way to use HUS and CBS data to generate estimates of community burden of influenza. Although the confidence intervals overlapped considerably, higher point estimates for burden among young children and older adults shows the utility for exploring the value of influenza vaccination among target groups.

  1. Can we avoid high levels of dose escalation for high-risk prostate cancer in the setting of androgen deprivation?

    Directory of Open Access Journals (Sweden)

    Shakespeare TP

    2016-05-01

    Full Text Available Thomas P Shakespeare,1,2 Shea W Wilcox,1 Noel J Aherne1,2 1Department of Radiation Oncology, North Coast Cancer Institute, 2Rural Clinical School, Faculty of Medicine, University of New South Wales, Coffs Harbour, NSW, Australia Aim: Both dose-escalated external beam radiotherapy (DE-EBRT and androgen deprivation therapy (ADT improve outcomes in patients with high-risk prostate cancer. However, there is little evidence specifically evaluating DE-EBRT for patients with high-risk prostate cancer receiving ADT, particularly for EBRT doses >74 Gy. We aimed to determine whether DE-EBRT >74 Gy improves outcomes for patients with high-risk prostate cancer receiving long-term ADT. Patients and methods: Patients with high-risk prostate cancer were treated on an institutional protocol prescribing 3–6 months neoadjuvant ADT and DE-EBRT, followed by 2 years of adjuvant ADT. Between 2006 and 2012, EBRT doses were escalated from 74 Gy to 76 Gy and then to 78 Gy. We interrogated our electronic medical record to identify these patients and analyzed our results by comparing dose levels. Results: In all, 479 patients were treated with a 68-month median follow-up. The 5-year biochemical disease-free survivals for the 74 Gy, 76 Gy, and 78 Gy groups were 87.8%, 86.9%, and 91.6%, respectively. The metastasis-free survivals were 95.5%, 94.5%, and 93.9%, respectively, and the prostate cancer-specific survivals were 100%, 94.4%, and 98.1%, respectively. Dose escalation had no impact on any outcome in either univariate or multivariate analysis. Conclusion: There was no benefit of DE-EBRT >74 Gy in our cohort of high-risk prostate patients treated with long-term ADT. As dose escalation has higher risks of radiotherapy-induced toxicity, it may be feasible to omit dose escalation beyond 74 Gy in this group of patients. Randomized studies evaluating dose escalation for high-risk patients receiving ADT should be considered. Keywords: radiotherapy, IMRT, dose

  2. [Dot1 and Set2 Histone Methylases Control the Spontaneous and UV-Induced Mutagenesis Levels in the Saccharomyces cerevisiae Yeasts].

    Science.gov (United States)

    Kozhina, T N; Evstiukhina, T A; Peshekhonov, V T; Chernenkov, A Yu; Korolev, V G

    2016-03-01

    In the Saccharomyces cerevisiae yeasts, the DOT1 gene product provides methylation of lysine 79 (K79) of hi- stone H3 and the SET2 gene product provides the methylation of lysine 36 (K36) of the same histone. We determined that the dot1 and set2 mutants suppress the UV-induced mutagenesis to an equally high degree. The dot1 mutation demonstrated statistically higher sensitivity to the low doses of MMC than the wild type strain. The analysis of the interaction between the dot1 and rad52 mutations revealed a considerable level of spontaneous cell death in the double dot1 rad52 mutant. We observed strong suppression of the gamma-in- duced mutagenesis in the set2 mutant. We determined that the dot1 and set2 mutations decrease the sponta- neous mutagenesis rate in both single and d ouble mutants. The epistatic interaction between the dot1 and set2 mutations and almost similar sensitivity of the corresponding mutants to the different types of DNA damage allow one to conclude that both genes are involved in the control of the same DNA repair pathways, the ho- mologous-recombination-based and the postreplicative DNA repair.

  3. Inelastic electron scattering and radiative pion capture to the lowest 1+ and 2+ isovector levels in A=12 nuclei. Continuity-equation effects

    International Nuclear Information System (INIS)

    Eramzhyan, R.A.; Gmitro, M.; Kaipov, T.D.; Kamalov, S.S.; Mach, R.

    1983-01-01

    Continuity equation for the nuclear electric charge and convection current has been used in an analysis of nuclear transition densities in 12 C. The results differ considerably from the former derivations. Standard M1 and calculated E2 nuclear transition densities are fixed which provide an accurate description of the electron scattering data. Such a nuclear structure imput is used in the radiative pion capture calculations

  4. Low-level HIV-1 replication and the dynamics of the resting CD4+ T cell reservoir for HIV-1 in the setting of HAART

    Directory of Open Access Journals (Sweden)

    Wilke Claus O

    2008-01-01

    Full Text Available Abstract Background In the setting of highly active antiretroviral therapy (HAART, plasma levels of human immunodeficiency type-1 (HIV-1 rapidly decay to below the limit of detection of standard clinical assays. However, reactivation of remaining latently infected memory CD4+ T cells is a source of continued virus production, forcing patients to remain on HAART despite clinically undetectable viral loads. Unfortunately, the latent reservoir decays slowly, with a half-life of up to 44 months, making it the major known obstacle to the eradication of HIV-1 infection. However, the mechanism underlying the long half-life of the latent reservoir is unknown. The most likely potential mechanisms are low-level viral replication and the intrinsic stability of latently infected cells. Methods Here we use a mathematical model of T cell dynamics in the setting of HIV-1 infection to probe the decay characteristics of the latent reservoir upon initiation of HAART. We compare the behavior of this model to patient derived data in order to gain insight into the role of low-level viral replication in the setting of HAART. Results By comparing the behavior of our model to patient derived data, we find that the viral dynamics observed in patients on HAART could be consistent with low-level viral replication but that this replication would not significantly affect the decay rate of the latent reservoir. Rather than low-level replication, the intrinsic stability of latently infected cells and the rate at which they are reactivated primarily determine the observed reservoir decay rate according to the predictions of our model. Conclusion The intrinsic stability of the latent reservoir has important implications for efforts to eradicate HIV-1 infection and suggests that intensified HAART would not accelerate the decay of the latent reservoir.

  5. Low-level HIV-1 replication and the dynamics of the resting CD4+ T cell reservoir for HIV-1 in the setting of HAART

    Science.gov (United States)

    Sedaghat, Ahmad R; Siliciano, Robert F; Wilke, Claus O

    2008-01-01

    Background In the setting of highly active antiretroviral therapy (HAART), plasma levels of human immunodeficiency type-1 (HIV-1) rapidly decay to below the limit of detection of standard clinical assays. However, reactivation of remaining latently infected memory CD4+ T cells is a source of continued virus production, forcing patients to remain on HAART despite clinically undetectable viral loads. Unfortunately, the latent reservoir decays slowly, with a half-life of up to 44 months, making it the major known obstacle to the eradication of HIV-1 infection. However, the mechanism underlying the long half-life of the latent reservoir is unknown. The most likely potential mechanisms are low-level viral replication and the intrinsic stability of latently infected cells. Methods Here we use a mathematical model of T cell dynamics in the setting of HIV-1 infection to probe the decay characteristics of the latent reservoir upon initiation of HAART. We compare the behavior of this model to patient derived data in order to gain insight into the role of low-level viral replication in the setting of HAART. Results By comparing the behavior of our model to patient derived data, we find that the viral dynamics observed in patients on HAART could be consistent with low-level viral replication but that this replication would not significantly affect the decay rate of the latent reservoir. Rather than low-level replication, the intrinsic stability of latently infected cells and the rate at which they are reactivated primarily determine the observed reservoir decay rate according to the predictions of our model. Conclusion The intrinsic stability of the latent reservoir has important implications for efforts to eradicate HIV-1 infection and suggests that intensified HAART would not accelerate the decay of the latent reservoir. PMID:18171475

  6. Weak solutions of magma equations

    International Nuclear Information System (INIS)

    Krishnan, E.V.

    1999-01-01

    Periodic solutions in terms of Jacobian cosine elliptic functions have been obtained for a set of values of two physical parameters for the magma equation which do not reduce to solitary-wave solutions. It was also obtained solitary-wave solutions for another set of these parameters as an infinite period limit of periodic solutions in terms of Weierstrass and Jacobian elliptic functions

  7. Effect of liner design, pulsator setting, and vacuum level on bovine teat tissue changes and milking characteristics as measured by ultrasonography

    Directory of Open Access Journals (Sweden)

    Gleeson David E

    2004-05-01

    Full Text Available Friesian-type dairy cows were milked with different machine settings to determine the effect of these settings on teat tissue reaction and on milking characteristics. Three teat-cup liner designs were used with varying upper barrel dimensions (wide-bore WB = 31.6 mm; narrow-bore NB = 21.0 mm; narrow-bore NB1 = 25.0 mm. These liners were tested with alternate and simultaneous pulsation patterns, pulsator ratios (60:40 and 67:33 and three system vacuum levels (40, 44 and 50 kPa. Teat tissue was measured using ultrasonography, before milking and directly after milking. The measurements recorded were teat canal length (TCL, teat diameter (TD, cistern diameter (CD and teat wall thickness (TWT. Teat tissue changes were similar with a system vacuum level of either 50 kPa (mid-level or 40 kPa (low-level. Widening the liner upper barrel bore dimension from 21.0 mm (P

  8. Teamwork skills in actual, in situ, and in-center pediatric emergencies: performance levels across settings and perceptions of comparative educational impact.

    Science.gov (United States)

    Couto, Thomaz Bittencourt; Kerrey, Benjamin T; Taylor, Regina G; FitzGerald, Michael; Geis, Gary L

    2015-04-01

    Pediatric emergencies require effective teamwork. These skills are developed and demonstrated in actual emergencies and in simulated environments, including simulation centers (in center) and the real care environment (in situ). Our aims were to compare teamwork performance across these settings and to identify perceived educational strengths and weaknesses between simulated settings. We hypothesized that teamwork performance in actual emergencies and in situ simulations would be higher than for in-center simulations. A retrospective, video-based assessment of teamwork was performed in an academic, pediatric level 1 trauma center, using the Team Emergency Assessment Measure (TEAM) tool (range, 0-44) among emergency department providers (physicians, nurses, respiratory therapists, paramedics, patient care assistants, and pharmacists). A survey-based, cross-sectional assessment was conducted to determine provider perceptions regarding simulation training. One hundred thirty-two videos, 44 from each setting, were reviewed. Mean total TEAM scores were similar and high in all settings (31.2 actual, 31.1 in situ, and 32.3 in-center, P = 0.39). Of 236 providers, 154 (65%) responded to the survey. For teamwork training, in situ simulation was considered more realistic (59% vs. 10%) and more effective (45% vs. 15%) than in-center simulation. In a video-based study in an academic pediatric institution, ratings of teamwork were relatively high among actual resuscitations and 2 simulation settings, substantiating the influence of simulation-based training on instilling a culture of communication and teamwork. On the basis of survey results, providers favored the in situ setting for teamwork training and suggested an expansion of our existing in situ program.

  9. Modification of diet in renal disease (MDRD study and CKD epidemiology collaboration (CKD-EPI equations for Taiwanese adults.

    Directory of Open Access Journals (Sweden)

    Ling-I Chen

    Full Text Available Estimated glomerular filtration rate (eGFR using the Modification of Diet in Renal Disease (MDRD study or the Chronic Kidney Disease Epidemiology Collaboration (CKD-EPI equations may not be accurate for Asians; thus, we developed modified eGFR equations for Taiwanese adults.This cross-sectional study compared the Taiwanese eGFR equations, the MDRD study, and the CKD-EPI equations with inulin clearance (Cin. A total of 695 adults including 259 healthy volunteers and 436 CKD patients were recruited. Participants from the Kaohsiung Medical University Hospital were used as the development set (N = 556 to develop the Taiwanese eGFR equations, whereas participants from the National Taiwan University Hospital were used as the validation set (N = 139 for external validation.The Taiwanese eGFR equations were developed by using the extended Bland-Altman plot in the development set. The Taiwanese MDRD equation was 1.309 × MDRD0.912, Taiwanese CKD-EPI was 1.262×CKD-EPI0.914 and Taiwanese four-level CKD-EPI was 1.205 × four-level CKD-EPI0.914. In the validation set, the Taiwanese equations had the lowest bias, the Taiwanese equations and the Japanese CKD-EPI equation had the lowest RMSE, whereas the Taiwanese and the Japanese equations had the best precision and the highest P30 among all equations. However, the Taiwanese MDRD equation had higher concordance correlation than did the Taiwanese CKD-EPI, the Taiwanese four-level CKD-EPI and the Japanese equations. Moreover, only the Taiwanese equations had no proportional bias among all of the equations. Finally, the Taiwanese MDRD equation had the best diagnostic performance in terms of ordinal logistic regression among all of the equations.The Taiwanese MDRD equation is better than the MDRD, CKD-EPI, Japanese, Asian, Thai, Taiwanese CKD-EPI, and Taiwanese four-level CKD-EPI equations for Taiwanese adults.

  10. Settings for Physical Activity – Developing a Site-specific Physical Activity Behavior Model based on Multi-level Intervention Studies

    DEFF Research Database (Denmark)

    Troelsen, Jens; Klinker, Charlotte Demant; Breum, Lars

    Settings for Physical Activity – Developing a Site-specific Physical Activity Behavior Model based on Multi-level Intervention Studies Introduction: Ecological models of health behavior have potential as theoretical framework to comprehend the multiple levels of factors influencing physical...... to be taken into consideration. A theoretical implication of this finding is to develop a site-specific physical activity behavior model adding a layered structure to the ecological model representing the determinants related to the specific site. Support: This study was supported by TrygFonden, Realdania...... activity (PA). The potential is shown by the fact that there has been a dramatic increase in application of ecological models in research and practice. One proposed core principle is that an ecological model is most powerful if the model is behavior-specific. However, based on multi-level interventions...

  11. A conditioned level-set method with block-division strategy to flame front extraction based on OH-PLIF measurements

    International Nuclear Information System (INIS)

    Han Yue; Cai Guo-Biao; Xu Xu; Bruno Renou; Abdelkrim Boukhalfa

    2014-01-01

    A novel approach to extract flame fronts, which is called the conditioned level-set method with block division (CLSB), has been developed. Based on a two-phase level-set formulation, the conditioned initialization and region-lock optimization appear to be beneficial to improve the efficiency and accuracy of the flame contour identification. The original block-division strategy enables the approach to be unsupervised by calculating local self-adaptive threshold values autonomously before binarization. The CLSB approach has been applied to deal with a large set of experimental data involving swirl-stabilized premixed combustion in diluted regimes operating at atmospheric pressures. The OH-PLIF measurements have been carried out in this framework. The resulting images are, thus, featured by lower signal-to-noise ratios (SNRs) than the ideal image; relatively complex flame structures lead to significant non-uniformity in the OH signal intensity; and, the magnitude of the maximum OH gradient observed along the flame front can also vary depending on flow or local stoichiometry. Compared with other conventional edge detection operators, the CLSB method demonstrates a good ability to deal with the OH-PLIF images at low SNR and with the presence of a multiple scales of both OH intensity and OH gradient. The robustness to noise sensitivity and intensity inhomogeneity has been evaluated throughout a range of experimental images of diluted flames, as well as against a circle test as Ground Truth (GT). (interdisciplinary physics and related areas of science and technology)

  12. Change in Vitamin D Levels Occurs Early after Antiretroviral Therapy Initiation and Depends on Treatment Regimen in Resource-Limited Settings

    Science.gov (United States)

    Havers, Fiona P.; Detrick, Barbara; Cardoso, Sandra W.; Berendes, Sima; Lama, Javier R.; Sugandhavesa, Patcharaphan; Mwelase, Noluthando H.; Campbell, Thomas B.; Gupta, Amita

    2014-01-01

    Study Background Vitamin D has wide-ranging effects on the immune system, and studies suggest that low serum vitamin D levels are associated with worse clinical outcomes in HIV. Recent studies have identified an interaction between antiretrovirals used to treat HIV and reduced serum vitamin D levels, but these studies have been done in North American and European populations. Methods Using a prospective cohort study design nested in a multinational clinical trial, we examined the effect of three combination antiretroviral (cART) regimens on serum vitamin D levels in 270 cART-naïve, HIV-infected adults in nine diverse countries, (Brazil, Haiti, Peru, Thailand, India, Malawi, South Africa, Zimbabwe and the United States). We evaluated the change between baseline serum vitamin D levels and vitamin D levels 24 and 48 weeks after cART initiation. Results Serum vitamin D levels decreased significantly from baseline to 24 weeks among those randomized to efavirenz/lamivudine/zidovudine (mean change: −7.94 [95% Confidence Interval (CI) −10.42, −5.54] ng/ml) and efavirenz/emtricitabine/tenofovir-DF (mean change: −6.66 [95% CI −9.40, −3.92] ng/ml) when compared to those randomized to atazanavir/emtricitabine/didanosine-EC (mean change: −2.29 [95% CI –4.83, 0.25] ng/ml). Vitamin D levels did not change significantly between week 24 and 48. Other factors that significantly affected serum vitamin D change included country (p<0.001), season (p<0.001) and baseline vitamin D level (p<0.001). Conclusion Efavirenz-containing cART regimens adversely affected vitamin D levels in patients from economically, geographically and racially diverse resource-limited settings. This effect was most pronounced early after cART initiation. Research is needed to define the role of Vitamin D supplementation in HIV care. PMID:24752177

  13. Equational theories of tropical sernirings

    DEFF Research Database (Denmark)

    Aceto, Luca; Esik, Zoltan; Ingolfsdottir, Anna

    2003-01-01

    examples of such structures are the (max,+) semiring and the tropical semiring. It is shown that none of the exotic semirings commonly considered in the literature has a finite basis for its equations, and that similar results hold for the commutative idempotent weak semirings that underlie them. For each......This paper studies the equational theories of various exotic semirings presented in the literature. Exotic semirings are semirings whose underlying carrier set is some subset of the set of real numbers equipped with binary operations of minimum or maximum as sum, and addition as product. Two prime...... of these commutative idempotent weak semirings, the paper offers characterizations of the equations that hold in them, decidability results for their equational theories, explicit descriptions of the free algebras in the varieties they generate, and relative axiomatization results. Udgivelsesdato: APR 11...

  14. An Empirical Comparison of Five Linear Equating Methods for the NEAT Design

    Science.gov (United States)

    Suh, Youngsuk; Mroch, Andrew A.; Kane, Michael T.; Ripkey, Douglas R.

    2009-01-01

    In this study, a data base containing the responses of 40,000 candidates to 90 multiple-choice questions was used to mimic data sets for 50-item tests under the "nonequivalent groups with anchor test" (NEAT) design. Using these smaller data sets, we evaluated the performance of five linear equating methods for the NEAT design with five levels of…

  15. Glycated haemoglobin (HbA1c ) and fasting plasma glucose relationships in sea-level and high-altitude settings.

    Science.gov (United States)

    Bazo-Alvarez, J C; Quispe, R; Pillay, T D; Bernabé-Ortiz, A; Smeeth, L; Checkley, W; Gilman, R H; Málaga, G; Miranda, J J

    2017-06-01

    Higher haemoglobin levels and differences in glucose metabolism have been reported among high-altitude residents, which may influence the diagnostic performance of HbA 1c . This study explores the relationship between HbA 1c and fasting plasma glucose (FPG) in populations living at sea level and at an altitude of > 3000 m. Data from 3613 Peruvian adults without a known diagnosis of diabetes from sea-level and high-altitude settings were evaluated. Linear, quadratic and cubic regression models were performed adjusting for potential confounders. Receiver operating characteristic (ROC) curves were constructed and concordance between HbA 1c and FPG was assessed using a Kappa index. At sea level and high altitude, means were 13.5 and 16.7 g/dl (P > 0.05) for haemoglobin level; 41 and 40 mmol/mol (5.9% and 5.8%; P < 0.01) for HbA 1c ; and 5.8 and 5.1 mmol/l (105 and 91.3 mg/dl; P < 0.001) for FPG, respectively. The adjusted relationship between HbA 1c and FPG was quadratic at sea level and linear at high altitude. Adjusted models showed that, to predict an HbA 1c value of 48 mmol/mol (6.5%), the corresponding mean FPG values at sea level and high altitude were 6.6 and 14.8 mmol/l (120 and 266 mg/dl), respectively. An HbA 1c cut-off of 48 mmol/mol (6.5%) had a sensitivity for high FPG of 87.3% (95% confidence interval (95% CI) 76.5 to 94.4) at sea level and 40.9% (95% CI 20.7 to 63.6) at high altitude. The relationship between HbA 1c and FPG is less clear at high altitude than at sea level. Caution is warranted when using HbA 1c to diagnose diabetes mellitus in this setting. © 2017 The Authors. Diabetic Medicine published by John Wiley & Sons Ltd on behalf of Diabetes UK.

  16. Partial differential equations of mathematical physics

    CERN Document Server

    Sobolev, S L

    1964-01-01

    Partial Differential Equations of Mathematical Physics emphasizes the study of second-order partial differential equations of mathematical physics, which is deemed as the foundation of investigations into waves, heat conduction, hydrodynamics, and other physical problems. The book discusses in detail a wide spectrum of topics related to partial differential equations, such as the theories of sets and of Lebesgue integration, integral equations, Green's function, and the proof of the Fourier method. Theoretical physicists, experimental physicists, mathematicians engaged in pure and applied math

  17. A systematic review on the relationship between the nursing shortage and nurses' job satisfaction, stress and burnout levels in oncology/haematology settings.

    Science.gov (United States)

    Gi, Toh Shir; Devi, Kamala M; Neo Kim, Emily Ang

    2011-01-01

    Nursing shortage is a global issue that which affects oncology nursing. Oncology nurses are more prone to experience job dissatisfaction, stress and burnout when they work in units with poor staffing. There is thus a need for greater understanding of the relationship between the nursing shortage and nursing outcomes in oncology/haematology settings. This review aimed to establish the best available evidence concerning the relationship between the nursing shortage and nurses' job satisfaction, stress and burnout levels in oncology/haematology settings; and to make recommendations for practice and future research. Types of participants: This review considered studies that included oncology registered nurses (RNs) who were more than 18 years of age and worked in either inpatient or outpatient oncology/haematology wards or units for the adult or paediatric patients.Types of intervention: This review considered studies that evaluated the relationship between the nursing shortage and nurses' job satisfaction, stress and burnout levels in oncology/haematology settings.Types of outcomes: This review included studies that measured job satisfaction, stress and burnout levels using different outcomes measures. Job satisfaction was determined by the Measure of Job Satisfaction scale, the Misener Nurse Practitioner Job Satisfaction Scale and the Likert scale, stress by the Pediatric Oncology Nurse Stressor Questionnaire and burnout by the Maslash Burnout Inventory scale.Types of studies: This review included descriptive/descriptive-correlational studies which were published in English. The search strategy sought to identify published and unpublished studies conducted between 1990 and 2010. Using a three-step search strategy, the following databases were accessed: CINAHL, Medline, Scopus, ScienceDirect, PsycInfo, PsycArticles, Web of Science, The Cochrane Library, Proquest and Mednar. Two independent reviewers assessed each paper for methodological validity prior to inclusion in

  18. Ultrasonic scalpel causes greater depth of soft tissue necrosis compared to monopolar electrocautery at standard power level settings in a pig model.

    Science.gov (United States)

    Homayounfar, Kia; Meis, Johanna; Jung, Klaus; Klosterhalfen, Bernd; Sprenger, Thilo; Conradi, Lena-Christin; Langer, Claus; Becker, Heinz

    2012-02-23

    Ultrasonic scalpel (UC) and monopolar electrocautery (ME) are common tools for soft tissue dissection. However, morphological data on the related tissue alteration are discordant. We developed an automatic device for standardized sample excision and compared quality and depth of morphological changes caused by UC and ME in a pig model. 100 tissue samples (5 × 3 cm) of the abdominal wall were excised in 16 pigs. Excisions were randomly performed manually or by using the self-constructed automatic device at standard power levels (60 W cutting in ME, level 5 in UC) for abdominal surgery. Quality of tissue alteration and depth of coagulation necrosis were examined histopathologically. Device (UC vs. ME) and mode (manually vs. automatic) effects were studied by two-way analysis of variance at a significance level of 5%. At the investigated power level settings UC and ME induced qualitatively similar coagulation necroses. Mean depth of necrosis was 450.4 ± 457.8 μm for manual UC and 553.5 ± 326.9 μm for automatic UC versus 149.0 ± 74.3 μm for manual ME and 257.6 ± 119.4 μm for automatic ME. Coagulation necrosis was significantly deeper (p power levels.

  19. APPLICATION OF ROUGH SET THEORY TO MAINTENANCE LEVEL DECISION-MAKING FOR AERO-ENGINE MODULES BASED ON INCREMENTAL KNOWLEDGE LEARNING

    Institute of Scientific and Technical Information of China (English)

    陆晓华; 左洪福; 蔡景

    2013-01-01

    The maintenance of an aero-engine usually includes three levels ,and the maintenance cost and period greatly differ depending on the different maintenance levels .To plan a reasonable maintenance budget program , airlines would like to predict the maintenance level of aero-engine before repairing in terms of performance parame-ters ,which can provide more economic benefits .The maintenance level decision rules are mined using the histori-cal maintenance data of a civil aero-engine based on the rough set theory ,and a variety of possible models of upda-ting rules produced by newly increased maintenance cases added to the historical maintenance case database are in-vestigated by the means of incremental machine learning .The continuously updated rules can provide reasonable guidance suggestions for engineers and decision support for planning a maintenance budget program before repai-ring .The results of an example show that the decision rules become more typical and robust ,and they are more accurate to predict the maintenance level of an aero-engine module as the maintenance data increase ,which illus-trates the feasibility of the represented method .

  20. Coastal lagoon systems as indicator of Holocene sea-level development in a periglacial soft-sediment setting: Samsø, Denmark

    DEFF Research Database (Denmark)

    Sander, Lasse; Fruergaard, Mikkel; Johannessen, Peter N.

    2014-01-01

    . Stratigraphy, grain-size distribution, fossil and organic matter content of cores retrieved from the lagoons were analyzed and compared. Age control was established using radiocarbon and optically stimulated luminescence dating. Our data produced a surprisingly consistent pattern for the sedimentary......Confined shallow-water environments are encountered many places along the coast of the inner Danish waters. Despite their common occurrence, these environments have rarely been studied as sedimentary archives. In this study we set out to trace back changes in relative sea-level and associated...... geomorphological responses in sediment cores retrieved from coastal lagoon systems on the island of Samsø, central Denmark. In the mid-Atlantic period, the post-glacial sea-level rise reached what is today the southern Kattegat Sea. Waves, currents and tides began to erode the unconsolidated moraine material...

  1. Differential equations, associators, and recurrences for amplitudes

    Directory of Open Access Journals (Sweden)

    Georg Puhlfürst

    2016-01-01

    Full Text Available We provide new methods to straightforwardly obtain compact and analytic expressions for ϵ-expansions of functions appearing in both field and string theory amplitudes. An algebraic method is presented to explicitly solve for recurrence relations connecting different ϵ-orders of a power series solution in ϵ of a differential equation. This strategy generalizes the usual iteration by Picard's method. Our tools are demonstrated for generalized hypergeometric functions. Furthermore, we match the ϵ-expansion of specific generalized hypergeometric functions with the underlying Drinfeld associator with proper Lie algebra and monodromy representations. We also apply our tools for computing ϵ-expansions for solutions to generic first-order Fuchsian equations (Schlesinger system. Finally, we set up our methods to systematically get compact and explicit α′-expansions of tree-level superstring amplitudes to any order in α′.

  2. Imaging disturbance zones ahead of a tunnel by elastic full-waveform inversion: Adjoint gradient based inversion vs. parameter space reduction using a level-set method

    Directory of Open Access Journals (Sweden)

    Andre Lamert

    2018-03-01

    Full Text Available We present and compare two flexible and effective methodologies to predict disturbance zones ahead of underground tunnels by using elastic full-waveform inversion. One methodology uses a linearized, iterative approach based on misfit gradients computed with the adjoint method while the other uses iterative, gradient-free unscented Kalman filtering in conjunction with a level-set representation. Whereas the former does not involve a priori assumptions on the distribution of elastic properties ahead of the tunnel, the latter introduces a massive reduction in the number of explicit model parameters to be inverted for by focusing on the geometric form of potential disturbances and their average elastic properties. Both imaging methodologies are validated through successful reconstructions of simple disturbances. As an application, we consider an elastic multiple disturbance scenario. By using identical synthetic time-domain seismograms as test data, we obtain satisfactory, albeit different, reconstruction results from the two inversion methodologies. The computational costs of both approaches are of the same order of magnitude, with the gradient-based approach showing a slight advantage. The model parameter space reduction approach compensates for this by additionally providing a posteriori estimates of model parameter uncertainty. Keywords: Tunnel seismics, Full waveform inversion, Seismic waves, Level-set method, Adjoint method, Kalman filter

  3. Differential equations a dynamical systems approach ordinary differential equations

    CERN Document Server

    Hubbard, John H

    1991-01-01

    This is a corrected third printing of the first part of the text Differential Equations: A Dynamical Systems Approach written by John Hubbard and Beverly West. The authors' main emphasis in this book is on ordinary differential equations. The book is most appropriate for upper level undergraduate and graduate students in the fields of mathematics, engineering, and applied mathematics, as well as the life sciences, physics and economics. Traditional courses on differential equations focus on techniques leading to solutions. Yet most differential equations do not admit solutions which can be written in elementary terms. The authors have taken the view that a differential equations defines functions; the object of the theory is to understand the behavior of these functions. The tools the authors use include qualitative and numerical methods besides the traditional analytic methods. The companion software, MacMath, is designed to bring these notions to life.

  4. Scaling of differential equations

    CERN Document Server

    Langtangen, Hans Petter

    2016-01-01

    The book serves both as a reference for various scaled models with corresponding dimensionless numbers, and as a resource for learning the art of scaling. A special feature of the book is the emphasis on how to create software for scaled models, based on existing software for unscaled models. Scaling (or non-dimensionalization) is a mathematical technique that greatly simplifies the setting of input parameters in numerical simulations. Moreover, scaling enhances the understanding of how different physical processes interact in a differential equation model. Compared to the existing literature, where the topic of scaling is frequently encountered, but very often in only a brief and shallow setting, the present book gives much more thorough explanations of how to reason about finding the right scales. This process is highly problem dependent, and therefore the book features a lot of worked examples, from very simple ODEs to systems of PDEs, especially from fluid mechanics. The text is easily accessible and exam...

  5. A Photon Free Method to Solve Radiation Transport Equations

    International Nuclear Information System (INIS)

    Chang, B

    2006-01-01

    The multi-group discrete-ordinate equations of radiation transfer is solved for the first time by Newton's method. It is a photon free method because the photon variables are eliminated from the radiation equations to yield a N group XN direction smaller but equivalent system of equations. The smaller set of equations can be solved more efficiently than the original set of equations. Newton's method is more stable than the Semi-implicit Linear method currently used by conventional radiation codes

  6. Elevated gamma glutamyl transferase levels are associated with the location of acute pulmonary embolism. Cross-sectional evaluation in hospital setting

    Directory of Open Access Journals (Sweden)

    Ozge Korkmaz

    Full Text Available ABSTRACT CONTEXT AND OBJECTIVE: The location of embolism is associated with clinical findings and disease severity in cases of acute pulmonary embolism. The level of gamma-glutamyl transferase increases under oxidative stress-related conditions. In this study, we investigated whether gamma-glutamyl transferase levels could predict the location of pulmonary embolism. DESIGN AND SETTING: Hospital-based cross-sectional study at Cumhuriyet University, Sivas, Turkey. METHODS : 120 patients who were diagnosed with acute pulmonary embolism through computed tomography-assisted pulmonary angiography were evaluated. They were divided into two main groups (proximally and distally located, and subsequently into subgroups according to thrombus localization as follows: first group (thrombus in main pulmonary artery; n = 9; second group (thrombus in main pulmonary artery branches; n = 71; third group (thrombus in pulmonary artery segmental branches; n = 34; and fourth group (thrombus in pulmonary artery subsegmental branches; n = 8. RESULTS : Gamma-glutamyl transferase levels on admission, heart rate, oxygen saturation, right ventricular dilatation/hypokinesia, pulmonary artery systolic pressure and cardiopulmonary resuscitation requirement showed prognostic significance in univariate analysis. The multivariate logistic regression model showed that gamma-glutamyl transferase level on admission (odds ratio, OR = 1.044; 95% confidence interval, CI: 1.011-1.079; P = 0.009 and pulmonary artery systolic pressure (OR = 1.063; 95% CI: 1.005-1.124; P = 0.033 remained independently associated with proximally localized thrombus in pulmonary artery. CONCLUSIONS : The findings revealed a significant association between increased existing embolism load in the pulmonary artery and increased serum gamma-glutamyl transferase levels.

  7. Ultrasonic scalpel causes greater depth of soft tissue necrosis compared to monopolar electrocautery at standard power level settings in a pig model

    Science.gov (United States)

    2012-01-01

    Background Ultrasonic scalpel (UC) and monopolar electrocautery (ME) are common tools for soft tissue dissection. However, morphological data on the related tissue alteration are discordant. We developed an automatic device for standardized sample excision and compared quality and depth of morphological changes caused by UC and ME in a pig model. Methods 100 tissue samples (5 × 3 cm) of the abdominal wall were excised in 16 pigs. Excisions were randomly performed manually or by using the self-constructed automatic device at standard power levels (60 W cutting in ME, level 5 in UC) for abdominal surgery. Quality of tissue alteration and depth of coagulation necrosis were examined histopathologically. Device (UC vs. ME) and mode (manually vs. automatic) effects were studied by two-way analysis of variance at a significance level of 5%. Results At the investigated power level settings UC and ME induced qualitatively similar coagulation necroses. Mean depth of necrosis was 450.4 ± 457.8 μm for manual UC and 553.5 ± 326.9 μm for automatic UC versus 149.0 ± 74.3 μm for manual ME and 257.6 ± 119.4 μm for automatic ME. Coagulation necrosis was significantly deeper (p < 0.01) when UC was used compared to ME. The mode of excision (manual versus automatic) did not influence the depth of necrosis (p = 0.85). There was no significant interaction between dissection tool and mode of excision (p = 0.93). Conclusions Thermal injury caused by UC and ME results in qualitatively similar coagulation necrosis. The depth of necrosis is significantly greater in UC compared to ME at investigated standard power levels. PMID:22361346

  8. Developing a generalized allometric equation for aboveground biomass estimation

    Science.gov (United States)

    Xu, Q.; Balamuta, J. J.; Greenberg, J. A.; Li, B.; Man, A.; Xu, Z.

    2015-12-01

    A key potential uncertainty in estimating carbon stocks across multiple scales stems from the use of empirically calibrated allometric equations, which estimate aboveground biomass (AGB) from plant characteristics such as diameter at breast height (DBH) and/or height (H). The equations themselves contain significant and, at times, poorly characterized errors. Species-specific equations may be missing. Plant responses to their local biophysical environment may lead to spatially varying allometric relationships. The structural predictor may be difficult or impossible to measure accurately, particularly when derived from remote sensing data. All of these issues may lead to significant and spatially varying uncertainties in the estimation of AGB that are unexplored in the literature. We sought to quantify the errors in predicting AGB at the tree and plot level for vegetation plots in California. To accomplish this, we derived a generalized allometric equation (GAE) which we used to model the AGB on a full set of tree information such as DBH, H, taxonomy, and biophysical environment. The GAE was derived using published allometric equations in the GlobAllomeTree database. The equations were sparse in details about the error since authors provide the coefficient of determination (R2) and the sample size. A more realistic simulation of tree AGB should also contain the noise that was not captured by the allometric equation. We derived an empirically corrected variance estimate for the amount of noise to represent the errors in the real biomass. Also, we accounted for the hierarchical relationship between different species by treating each taxonomic level as a covariate nested within a higher taxonomic level (e.g. species contribution of each different covariate in estimating the AGB of trees. Lastly, we applied the GAE to an existing vegetation plot database - Forest Inventory and Analysis database - to derive per-tree and per-plot AGB estimations, their errors, and how

  9. Computer-aided measurement of liver volumes in CT by means of geodesic active contour segmentation coupled with level-set algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Kenji; Kohlbrenner, Ryan; Epstein, Mark L.; Obajuluwa, Ademola M.; Xu Jianwu; Hori, Masatoshi [Department of Radiology, University of Chicago, 5841 South Maryland Avenue, Chicago, Illinois 60637 (United States)

    2010-05-15

    Purpose: Computerized liver extraction from hepatic CT images is challenging because the liver often abuts other organs of a similar density. The purpose of this study was to develop a computer-aided measurement of liver volumes in hepatic CT. Methods: The authors developed a computerized liver extraction scheme based on geodesic active contour segmentation coupled with level-set contour evolution. First, an anisotropic diffusion filter was applied to portal-venous-phase CT images for noise reduction while preserving the liver structure, followed by a scale-specific gradient magnitude filter to enhance the liver boundaries. Then, a nonlinear grayscale converter enhanced the contrast of the liver parenchyma. By using the liver-parenchyma-enhanced image as a speed function, a fast-marching level-set algorithm generated an initial contour that roughly estimated the liver shape. A geodesic active contour segmentation algorithm coupled with level-set contour evolution refined the initial contour to define the liver boundaries more precisely. The liver volume was then calculated using these refined boundaries. Hepatic CT scans of 15 prospective liver donors were obtained under a liver transplant protocol with a multidetector CT system. The liver volumes extracted by the computerized scheme were compared to those traced manually by a radiologist, used as ''gold standard.''Results: The mean liver volume obtained with our scheme was 1504 cc, whereas the mean gold standard manual volume was 1457 cc, resulting in a mean absolute difference of 105 cc (7.2%). The computer-estimated liver volumetrics agreed excellently with the gold-standard manual volumetrics (intraclass correlation coefficient was 0.95) with no statistically significant difference (F=0.77; p(F{<=}f)=0.32). The average accuracy, sensitivity, specificity, and percent volume error were 98.4%, 91.1%, 99.1%, and 7.2%, respectively. Computerized CT liver volumetry would require substantially less

  10. Computer-aided measurement of liver volumes in CT by means of geodesic active contour segmentation coupled with level-set algorithms

    International Nuclear Information System (INIS)

    Suzuki, Kenji; Kohlbrenner, Ryan; Epstein, Mark L.; Obajuluwa, Ademola M.; Xu Jianwu; Hori, Masatoshi

    2010-01-01

    Purpose: Computerized liver extraction from hepatic CT images is challenging because the liver often abuts other organs of a similar density. The purpose of this study was to develop a computer-aided measurement of liver volumes in hepatic CT. Methods: The authors developed a computerized liver extraction scheme based on geodesic active contour segmentation coupled with level-set contour evolution. First, an anisotropic diffusion filter was applied to portal-venous-phase CT images for noise reduction while preserving the liver structure, followed by a scale-specific gradient magnitude filter to enhance the liver boundaries. Then, a nonlinear grayscale converter enhanced the contrast of the liver parenchyma. By using the liver-parenchyma-enhanced image as a speed function, a fast-marching level-set algorithm generated an initial contour that roughly estimated the liver shape. A geodesic active contour segmentation algorithm coupled with level-set contour evolution refined the initial contour to define the liver boundaries more precisely. The liver volume was then calculated using these refined boundaries. Hepatic CT scans of 15 prospective liver donors were obtained under a liver transplant protocol with a multidetector CT system. The liver volumes extracted by the computerized scheme were compared to those traced manually by a radiologist, used as ''gold standard.''Results: The mean liver volume obtained with our scheme was 1504 cc, whereas the mean gold standard manual volume was 1457 cc, resulting in a mean absolute difference of 105 cc (7.2%). The computer-estimated liver volumetrics agreed excellently with the gold-standard manual volumetrics (intraclass correlation coefficient was 0.95) with no statistically significant difference (F=0.77; p(F≤f)=0.32). The average accuracy, sensitivity, specificity, and percent volume error were 98.4%, 91.1%, 99.1%, and 7.2%, respectively. Computerized CT liver volumetry would require substantially less completion time

  11. District health manager and mid-level provider perceptions of practice environments in acute obstetric settings in Tanzania: a mixed-method study.

    Science.gov (United States)

    Ng'ang'a, Njoki; Byrne, Mary Woods; Kruk, Margaret E; Shemdoe, Aloisia; de Pinho, Helen

    2016-08-08

    and mid-level providers points to deficient HRH management practices, which contribute to poor practice environments in acute obstetric settings in Tanzania. Our findings indicate that members of CHMTs require additional support to adequately fulfill their HRH management role. Further research conducted in low-income countries is necessary to determine the appropriate package of interventions required to strengthen the capacity of members of CHMTs.

  12. Partial Differential Equations

    CERN Document Server

    1988-01-01

    The volume contains a selection of papers presented at the 7th Symposium on differential geometry and differential equations (DD7) held at the Nankai Institute of Mathematics, Tianjin, China, in 1986. Most of the contributions are original research papers on topics including elliptic equations, hyperbolic equations, evolution equations, non-linear equations from differential geometry and mechanics, micro-local analysis.

  13. Equating error in observed-score equating

    NARCIS (Netherlands)

    van der Linden, Willem J.

    2006-01-01

    Traditionally, error in equating observed scores on two versions of a test is defined as the difference between the transformations that equate the quantiles of their distributions in the sample and population of test takers. But it is argued that if the goal of equating is to adjust the scores of

  14. What happens to linear properties as we move from the Klein-Gordon equation to the sine-Gordon equation

    International Nuclear Information System (INIS)

    Kovalyov, Mikhail

    2010-01-01

    In this article the sets of solutions of the sine-Gordon equation and its linearization the Klein-Gordon equation are discussed and compared. It is shown that the set of solutions of the sine-Gordon equation possesses a richer structure which partly disappears during linearization. Just like the solutions of the Klein-Gordon equation satisfy the linear superposition principle, the solutions of the sine-Gordon equation satisfy a nonlinear superposition principle.

  15. A segmentation and classification scheme for single tooth in MicroCT images based on 3D level set and k-means+.

    Science.gov (United States)

    Wang, Liansheng; Li, Shusheng; Chen, Rongzhen; Liu, Sze-Yu; Chen, Jyh-Cheng

    2017-04-01

    Accurate classification of different anatomical structures of teeth from medical images provides crucial information for the stress analysis in dentistry. Usually, the anatomical structures of teeth are manually labeled by experienced clinical doctors, which is time consuming. However, automatic segmentation and classification is a challenging task because the anatomical structures and surroundings of the tooth in medical images are rather complex. Therefore, in this paper, we propose an effective framework which is designed to segment the tooth with a Selective Binary and Gaussian Filtering Regularized Level Set (GFRLS) method improved by fully utilizing 3 dimensional (3D) information, and classify the tooth by employing unsupervised learning i.e., k-means++ method. In order to evaluate the proposed method, the experiments are conducted on the sufficient and extensive datasets of mandibular molars. The experimental results show that our method can achieve higher accuracy and robustness compared to other three clustering methods. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Evaluation of Parallel Level Sets and Bowsher's Method as Segmentation-Free Anatomical Priors for Time-of-Flight PET Reconstruction.

    Science.gov (United States)

    Schramm, Georg; Holler, Martin; Rezaei, Ahmadreza; Vunckx, Kathleen; Knoll, Florian; Bredies, Kristian; Boada, Fernando; Nuyts, Johan

    2018-02-01

    In this article, we evaluate Parallel Level Sets (PLS) and Bowsher's method as segmentation-free anatomical priors for regularized brain positron emission tomography (PET) reconstruction. We derive the proximity operators for two PLS priors and use the EM-TV algorithm in combination with the first order primal-dual algorithm by Chambolle and Pock to solve the non-smooth optimization problem for PET reconstruction with PLS regularization. In addition, we compare the performance of two PLS versions against the symmetric and asymmetric Bowsher priors with quadratic and relative difference penalty function. For this aim, we first evaluate reconstructions of 30 noise realizations of simulated PET data derived from a real hybrid positron emission tomography/magnetic resonance imaging (PET/MR) acquisition in terms of regional bias and noise. Second, we evaluate reconstructions of a real brain PET/MR data set acquired on a GE Signa time-of-flight PET/MR in a similar way. The reconstructions of simulated and real 3D PET/MR data show that all priors were superior to post-smoothed maximum likelihood expectation maximization with ordered subsets (OSEM) in terms of bias-noise characteristics in different regions of interest where the PET uptake follows anatomical boundaries. Our implementation of the asymmetric Bowsher prior showed slightly superior performance compared with the two versions of PLS and the symmetric Bowsher prior. At very high regularization weights, all investigated anatomical priors suffer from the transfer of non-shared gradients.

  17. Gay-Straight Alliances vary on dimensions of youth socializing and advocacy: factors accounting for individual and setting-level differences.

    Science.gov (United States)

    Poteat, V Paul; Scheer, Jillian R; Marx, Robert A; Calzo, Jerel P; Yoshikawa, Hirokazu

    2015-06-01

    Gay-Straight Alliances (GSAs) are school-based youth settings that could promote health. Yet, GSAs have been treated as homogenous without attention to variability in how they operate or to how youth are involved in different capacities. Using a systems perspective, we considered two primary dimensions along which GSAs function to promote health: providing socializing and advocacy opportunities. Among 448 students in 48 GSAs who attended six regional conferences in Massachusetts (59.8 % LGBQ; 69.9 % White; 70.1 % cisgender female), we found substantial variation among GSAs and youth in levels of socializing and advocacy. GSAs were more distinct from one another on advocacy than socializing. Using multilevel modeling, we identified group and individual factors accounting for this variability. In the socializing model, youth and GSAs that did more socializing activities did more advocacy. In the advocacy model, youth who were more actively engaged in the GSA as well as GSAs whose youth collectively perceived greater school hostility and reported greater social justice efficacy did more advocacy. Findings suggest potential reasons why GSAs vary in how they function in ways ranging from internal provisions of support, to visibility raising, to collective social change. The findings are further relevant for settings supporting youth from other marginalized backgrounds and that include advocacy in their mission.

  18. Systematic review on the relationship between the nursing shortage and job satisfaction, stress and burnout levels among nurses in oncology/haematology settings.

    Science.gov (United States)

    Toh, Shir Gi; Ang, Emily; Devi, M Kamala

    2012-06-01

    To establish the best available evidence regarding the relationship between the nursing shortage and nurses' job satisfaction, stress and burnout levels in oncology/haematology settings. Electronic databases (CINAHL, Medline, Scopus, ScienceDirect, PsycInfo, PsycArticles, Web of Science, The Cochrane Library, Proquest and Mednar) were searched using a three-step strategy in order to identify published and unpublished studies conducted between 1990 and 2010. Grey literature was excluded in the review. The identified studies were evaluated using standardised critical appraisal instruments from the Joanna Briggs Institute-Meta Analysis of Statistics Assessment and Review Instrument (JBI-MAStARI). A total of seven descriptive and descriptive-correlational studies published in English were included and data were presented in a narrative summary. Findings revealed a positive bidirectional relationship between the nursing shortage and oncology registered nurses' (RNs') job dissatisfaction, stress and burnout. The extent of the job dissatisfaction, stress and burnout experienced by the oncology RNs and their perception of staffing inadequacy differed according to their demography and work settings. Particularly, nurses who had higher qualifications and positions, who worked full-time and who worked in inpatient settings and non-Magnet hospitals were more likely to attribute staffing inadequacy as one of the main contributing factors for their job dissatisfaction, stress and burnout. This led to a rise in the number of oncology RNs leaving the speciality. Within the constraints of the study and the few quality papers available, it appears that oncology RNs who worked in substandard staffing units often express job dissatisfaction, stress and burnout, which prompt them to seek new employment out of the oncology specialty. This entails a pressing need for organisations to ensure sufficient staffing in oncology/haematology settings, in order to ensure that quality patient care

  19. A level-set method for pathology segmentation in fluorescein angiograms and en face retinal images of patients with age-related macular degeneration

    Science.gov (United States)

    Mohammad, Fatimah; Ansari, Rashid; Shahidi, Mahnaz

    2013-03-01

    The visibility and continuity of the inner segment outer segment (ISOS) junction layer of the photoreceptors on spectral domain optical coherence tomography images is known to be related to visual acuity in patients with age-related macular degeneration (AMD). Automatic detection and segmentation of lesions and pathologies in retinal images is crucial for the screening, diagnosis, and follow-up of patients with retinal diseases. One of the challenges of using the classical level-set algorithms for segmentation involves the placement of the initial contour. Manually defining the contour or randomly placing it in the image may lead to segmentation of erroneous structures. It is important to be able to automatically define the contour by using information provided by image features. We explored a level-set method which is based on the classical Chan-Vese model and which utilizes image feature information for automatic contour placement for the segmentation of pathologies in fluorescein angiograms and en face retinal images of the ISOS layer. This was accomplished by exploiting a priori knowledge of the shape and intensity distribution allowing the use of projection profiles to detect the presence of pathologies that are characterized by intensity differences with surrounding areas in retinal images. We first tested our method by applying it to fluorescein angiograms. We then applied our method to en face retinal images of patients with AMD. The experimental results included demonstrate that the proposed method provided a quick and improved outcome as compared to the classical Chan-Vese method in which the initial contour is randomly placed, thus indicating the potential to provide a more accurate and detailed view of changes in pathologies due to disease progression and treatment.

  20. Monitoring Street-Level Spatial-Temporal Variations of Carbon Monoxide in Urban Settings Using a Wireless Sensor Network (WSN Framework

    Directory of Open Access Journals (Sweden)

    Tzai-Hung Wen

    2013-11-01

    Full Text Available Air pollution has become a severe environmental problem due to urbanization and heavy traffic. Monitoring street-level air quality is an important issue, but most official monitoring stations are installed to monitor large-scale air quality conditions, and their limited spatial resolution cannot reflect the detailed variations in air quality that may be induced by traffic jams. By deploying wireless sensors on crossroads and main roads, this study established a pilot framework for a wireless sensor network (WSN-based real-time monitoring system to understand street-level spatial-temporal changes of carbon monoxide (CO in urban settings. The system consists of two major components. The first component is the deployment of wireless sensors. We deployed 44 sensor nodes, 40 transmitter nodes and four gateway nodes in this study. Each sensor node includes a signal processing module, a CO sensor and a wireless communication module. In order to capture realistic human exposure to traffic pollutants, all sensors were deployed at a height of 1.5 m on lampposts and traffic signs. The study area covers a total length of 1.5 km of Keelung Road in Taipei City. The other component is a map-based monitoring platform for sensor data visualization and manipulation in time and space. Using intensive real-time street-level monitoring framework, we compared the spatial-temporal patterns of air pollution in different time periods. Our results capture four CO concentration peaks throughout the day at the location, which was located along an arterial and nearby traffic sign. The hourly average could reach 5.3 ppm from 5:00 pm to 7:00 pm due to the traffic congestion. The proposed WSN-based framework captures detailed ground information and potential risk of human exposure to traffic-related air pollution. It also provides street-level insights into real-time monitoring for further early warning of air pollution and urban environmental management.

  1. Monitoring street-level spatial-temporal variations of carbon monoxide in urban settings using a wireless sensor network (WSN) framework.

    Science.gov (United States)

    Wen, Tzai-Hung; Jiang, Joe-Air; Sun, Chih-Hong; Juang, Jehn-Yih; Lin, Tzu-Shiang

    2013-11-27

    Air pollution has become a severe environmental problem due to urbanization and heavy traffic. Monitoring street-level air quality is an important issue, but most official monitoring stations are installed to monitor large-scale air quality conditions, and their limited spatial resolution cannot reflect the detailed variations in air quality that may be induced by traffic jams. By deploying wireless sensors on crossroads and main roads, this study established a pilot framework for a wireless sensor network (WSN)-based real-time monitoring system to understand street-level spatial-temporal changes of carbon monoxide (CO) in urban settings. The system consists of two major components. The first component is the deployment of wireless sensors. We deployed 44 sensor nodes, 40 transmitter nodes and four gateway nodes in this study. Each sensor node includes a signal processing module, a CO sensor and a wireless communication module. In order to capture realistic human exposure to traffic pollutants, all sensors were deployed at a height of 1.5 m on lampposts and traffic signs. The study area covers a total length of 1.5 km of Keelung Road in Taipei City. The other component is a map-based monitoring platform for sensor data visualization and manipulation in time and space. Using intensive real-time street-level monitoring framework, we compared the spatial-temporal patterns of air pollution in different time periods. Our results capture four CO concentration peaks throughout the day at the location, which was located along an arterial and nearby traffic sign. The hourly average could reach 5.3 ppm from 5:00 pm to 7:00 pm due to the traffic congestion. The proposed WSN-based framework captures detailed ground information and potential risk of human exposure to traffic-related air pollution. It also provides street-level insights into real-time monitoring for further early warning of air pollution and urban environmental management.

  2. Monitoring Street-Level Spatial-Temporal Variations of Carbon Monoxide in Urban Settings Using a Wireless Sensor Network (WSN) Framework

    Science.gov (United States)

    Wen, Tzai-Hung; Jiang, Joe-Air; Sun, Chih-Hong; Juang, Jehn-Yih; Lin, Tzu-Shiang

    2013-01-01

    Air pollution has become a severe environmental problem due to urbanization and heavy traffic. Monitoring street-level air quality is an important issue, but most official monitoring stations are installed to monitor large-scale air quality conditions, and their limited spatial resolution cannot reflect the detailed variations in air quality that may be induced by traffic jams. By deploying wireless sensors on crossroads and main roads, this study established a pilot framework for a wireless sensor network (WSN)-based real-time monitoring system to understand street-level spatial-temporal changes of carbon monoxide (CO) in urban settings. The system consists of two major components. The first component is the deployment of wireless sensors. We deployed 44 sensor nodes, 40 transmitter nodes and four gateway nodes in this study. Each sensor node includes a signal processing module, a CO sensor and a wireless communication module. In order to capture realistic human exposure to traffic pollutants, all sensors were deployed at a height of 1.5 m on lampposts and traffic signs. The study area covers a total length of 1.5 km of Keelung Road in Taipei City. The other component is a map-based monitoring platform for sensor data visualization and manipulation in time and space. Using intensive real-time street-level monitoring framework, we compared the spatial-temporal patterns of air pollution in different time periods. Our results capture four CO concentration peaks throughout the day at the location, which was located along an arterial and nearby traffic sign. The hourly average could reach 5.3 ppm from 5:00 pm to 7:00 pm due to the traffic congestion. The proposed WSN-based framework captures detailed ground information and potential risk of human exposure to traffic-related air pollution. It also provides street-level insights into real-time monitoring for further early warning of air pollution and urban environmental management. PMID:24287859

  3. Equating accelerometer estimates among youth

    DEFF Research Database (Denmark)

    Brazendale, Keith; Beets, Michael W; Bornstein, Daniel B

    2016-01-01

    from one set of cutpoints into another. Bland Altman plots illustrate the agreement between actual MVPA and predicted MVPA values. RESULTS: Across the total sample, mean MVPA ranged from 29.7MVPAmind(-1) (Puyau) to 126.1MVPAmind(-1) (Freedson 3 METs). Across conversion equations, median absolute...

  4. Structural equations in language learning

    NARCIS (Netherlands)

    Moortgat, M.J.

    In categorial systems with a fixed structural component, the learning problem comes down to finding the solution for a set of typeassignment equations. A hard-wired structural component is problematic if one want to address issues of structural variation. Our starting point is a type-logical

  5. Semiautomated hybrid algorithm for estimation of three-dimensional liver surface in CT using dynamic cellular automata and level-sets.

    Science.gov (United States)

    Dakua, Sarada Prasad; Abinahed, Julien; Al-Ansari, Abdulla

    2015-04-01

    Liver segmentation continues to remain a major challenge, largely due to its intense complexity with surrounding anatomical structures (stomach, kidney, and heart), high noise level and lack of contrast in pathological computed tomography (CT) data. We present an approach to reconstructing the liver surface in low contrast CT. The main contributions are: (1) a stochastic resonance-based methodology in discrete cosine transform domain is developed to enhance the contrast of pathological liver images, (2) a new formulation is proposed to prevent the object boundary, resulting from the cellular automata method, from leaking into the surrounding areas of similar intensity, and (3) a level-set method is suggested to generate intermediate segmentation contours from two segmented slices distantly located in a subject sequence. We have tested the algorithm on real datasets obtained from two sources, Hamad General Hospital and medical image computing and computer-assisted interventions grand challenge workshop. Various parameters in the algorithm, such as [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], and [Formula: see text], play imperative roles, thus their values are precisely selected. Both qualitative and quantitative evaluation performed on liver data show promising segmentation accuracy when compared with ground truth data reflecting the potential of the proposed method.

  6. Exact solutions of generalized Zakharov and Ginzburg-Landau equations

    International Nuclear Information System (INIS)

    Zhang Jinliang; Wang Mingliang; Gao Kequan

    2007-01-01

    By using the homogeneous balance principle, the exact solutions of the generalized Zakharov equations and generalized Ginzburg-Landau equation are obtained with the aid of a set of subsidiary higher-order ordinary differential equations (sub-equations for short)

  7. Elliptic partial differential equations

    CERN Document Server

    Han, Qing

    2011-01-01

    Elliptic Partial Differential Equations by Qing Han and FangHua Lin is one of the best textbooks I know. It is the perfect introduction to PDE. In 150 pages or so it covers an amazing amount of wonderful and extraordinary useful material. I have used it as a textbook at both graduate and undergraduate levels which is possible since it only requires very little background material yet it covers an enormous amount of material. In my opinion it is a must read for all interested in analysis and geometry, and for all of my own PhD students it is indeed just that. I cannot say enough good things abo

  8. Clinical Diagnostic Utility of IP-10 and LAM Antigen Levels for the Diagnosis of Tuberculous Pleural Effusions in a High Burden Setting

    Science.gov (United States)

    Dheda, Keertan; Van-Zyl Smit, Richard N.; Sechi, Leonardo A.; Badri, Motasim; Meldau, Richard; Symons, Gregory; Khalfey, Hoosein; Carr, Igshaan; Maredza, Alice; Dawson, Rodney; Wainright, Helen; Whitelaw, Andrew; Bateman, Eric D.; Zumla, Alimuddin

    2009-01-01

    Background Current tools for the diagnosis of tuberculosis pleural effusions are sub-optimal. Data about the value of new diagnostic technologies are limited, particularly, in high burden settings. Preliminary case control studies have identified IFN-γ-inducible-10kDa protein (IP-10) as a promising diagnostic marker; however, its diagnostic utility in a day-to-day clinical setting is unclear. Detection of LAM antigen has not previously been evaluated in pleural fluid. Methods We investigated the comparative diagnostic utility of established (adenosine deaminase [ADA]), more recent (standardized nucleic-acid-amplification-test [NAAT]) and newer technologies (a standardized LAM mycobacterial antigen-detection assay and IP-10 levels) for the evaluation of pleural effusions in 78 consecutively recruited South African tuberculosis suspects. All consenting participants underwent pleural biopsy unless contra-indicated or refused. The reference standard comprised culture positivity for M. tuberculosis or histology suggestive of tuberculosis. Principal Findings Of 74 evaluable subjects 48, 7 and 19 had definite, probable and non-TB, respectively. IP-10 levels were significantly higher in TB vs non-TB participants (p<0.0001). The respective outcomes [sensitivity, specificity, PPV, NPV %] for the different diagnostic modalities were: ADA at the 30 IU/L cut-point [96; 69; 90; 85], NAAT [6; 93; 67; 28], IP-10 at the 28,170 pg/ml ROC-derived cut-point [80; 82; 91; 64], and IP-10 at the 4035 pg/ml cut-point [100; 53; 83; 100]. Thus IP-10, using the ROC-derived cut-point, missed ∼20% of TB cases and mis-diagnosed ∼20% of non-TB cases. By contrast, when a lower cut-point was used a negative test excluded TB. The NAAT had a poor sensitivity but high specificity. LAM antigen-detection was not diagnostically useful. Conclusion Although IP-10, like ADA, has sub-optimal specificity, it may be a clinically useful rule-out test for tuberculous pleural effusions. Larger multi

  9. Chemical Equation Balancing.

    Science.gov (United States)

    Blakley, G. R.

    1982-01-01

    Reviews mathematical techniques for solving systems of homogeneous linear equations and demonstrates that the algebraic method of balancing chemical equations is a matter of solving a system of homogeneous linear equations. FORTRAN programs using this matrix method to chemical equation balancing are available from the author. (JN)

  10. Handbook of integral equations

    CERN Document Server

    Polyanin, Andrei D

    2008-01-01

    This handbook contains over 2,500 integral equations with solutions as well as analytical and numerical methods for solving linear and nonlinear equations. It explores Volterra, Fredholm, WienerHopf, Hammerstein, Uryson, and other equations that arise in mathematics, physics, engineering, the sciences, and economics. This second edition includes new chapters on mixed multidimensional equations and methods of integral equations for ODEs and PDEs, along with over 400 new equations with exact solutions. With many examples added for illustrative purposes, it presents new material on Volterra, Fredholm, singular, hypersingular, dual, and nonlinear integral equations, integral transforms, and special functions.

  11. Increased levels of NOTCH1, NF-kappaB, and other interconnected transcription factors characterize primitive sets of hematopoietic stem cells.

    Science.gov (United States)

    Panepucci, Rodrigo Alexandre; Oliveira, Lucila Habib B; Zanette, Dalila Luciola; Viu Carrara, Rita de Cassia; Araujo, Amélia Goes; Orellana, Maristela Delgado; Bonini de Palma, Patrícia Vianna; Menezes, Camila C B O; Covas, Dimas Tadeu; Zago, Marco Antonio

    2010-03-01

    As previously shown, higher levels of NOTCH1 and increased NF-kappaB signaling is a distinctive feature of the more primitive umbilical cord blood (UCB) CD34+ hematopoietic stem cells (HSCs), as compared to bone marrow (BM). Differences between BM and UCB cell composition also account for this finding. The CD133 marker defines a more primitive cell subset among CD34+ HSC with a proposed hemangioblast potential. To further evaluate the molecular basis related to the more primitive characteristics of UCB and CD133+ HSC, immunomagnetically purified human CD34+ and CD133+ cells from BM and UCB were used on gene expression microarrays studies. UCB CD34+ cells contained a significantly higher proportion of CD133+ cells than BM (70% and 40%, respectively). Cluster analysis showed that BM CD133+ cells grouped with the UCB cells (CD133+ and CD34+) rather than to BM CD34+ cells. Compared with CD34+ cells, CD133+ had a higher expression of many transcription factors (TFs). Promoter analysis on all these TF genes revealed a significantly higher frequency (than expected by chance) of NF-kappaB-binding sites (BS), including potentially novel NF-kappaB targets such as RUNX1, GATA3, and USF1. Selected transcripts of TF related to primitive hematopoiesis and self-renewal, such as RUNX1, GATA3, USF1, TAL1, HOXA9, HOXB4, NOTCH1, RELB, and NFKB2 were evaluated by real-time PCR and were all significantly positively correlated. Taken together, our data indicate the existence of an interconnected transcriptional network characterized by higher levels of NOTCH1, NF-kappaB, and other important TFs on more primitive HSC sets.

  12. Setting Quality Improvement Priorities for Women Receiving Systemic Therapy for Early-Stage Breast Cancer by Using Population-Level Administrative Data.

    Science.gov (United States)

    Enright, Katherine A; Taback, Nathan; Powis, Melanie Lynn; Gonzalez, Alejandro; Yun, Lingsong; Sutradhar, Rinku; Trudeau, Maureen E; Booth, Christopher M; Krzyzanowska, Monika K

    2017-10-01

    Purpose Routine evaluation of quality measures (QMs) can drive improvement in cancer systems by highlighting gaps in care. Targeting quality improvement at QMs that demonstrate substantial variation has the potential to make the largest impact at the population level. We developed an approach that uses both variation in performance and number of patients affected by the QM to set priorities for improving the quality of systemic therapy for women with early-stage breast cancer (EBC). Patients and Methods Patients with EBC diagnosed from 2006 to 2010 in Ontario, Canada, were identified in the Ontario Cancer Registry and linked deterministically to multiple health care databases. Individual QMs within a panel of 15 QMs previously developed to assess the quality of systemic therapy across four domains (access, treatment delivery, toxicity, and safety) were ranked on interinstitutional variation in performance (using interquartile range) and the number of patients who were affected; then the two rankings were averaged for a summative priority ranking. Results We identified 28,427 patients with EBC who were treated at 84 institutions. The use of computerized physician electronic order entry for chemotherapy, emergency room visits or hospitalizations during chemotherapy, and timely receipt of chemotherapy were identified as the QMs that had the largest potential to improve quality of care at a system level within this cohort. Conclusion A simple ranking system based on interinstitutional variation in performance and patient volume can be used to identify high-priority areas for quality improvement from a population perspective. This approach is generalizable to other health care systems that use QMs to drive improvement.

  13. Laboratory Performance of Five Selected Soil Moisture Sensors Applying Factory and Own Calibration Equations for Two Soil Media of Different Bulk Density and Salinity Levels

    Science.gov (United States)

    Matula, Svatopluk; Báťková, Kamila; Legese, Wossenu Lemma

    2016-01-01

    Non-destructive soil water content determination is a fundamental component for many agricultural and environmental applications. The accuracy and costs of the sensors define the measurement scheme and the ability to fit the natural heterogeneous conditions. The aim of this study was to evaluate five commercially available and relatively cheap sensors usually grouped with impedance and FDR sensors. ThetaProbe ML2x (impedance) and ECH2O EC-10, ECH2O EC-20, ECH2O EC-5, and ECH2O TE (all FDR) were tested on silica sand and loess of defined characteristics under controlled laboratory conditions. The calibrations were carried out in nine consecutive soil water contents from dry to saturated conditions (pure water and saline water). The gravimetric method was used as a reference method for the statistical evaluation (ANOVA with significance level 0.05). Generally, the results showed that our own calibrations led to more accurate soil moisture estimates. Variance component analysis arranged the factors contributing to the total variation as follows: calibration (contributed 42%), sensor type (contributed 29%), material (contributed 18%), and dry bulk density (contributed 11%). All the tested sensors performed very well within the whole range of water content, especially the sensors ECH2O EC-5 and ECH2O TE, which also performed surprisingly well in saline conditions. PMID:27854263

  14. A level set methodology for predicting the effect of mask wear on surface evolution of features in abrasive jet micro-machining

    International Nuclear Information System (INIS)

    Burzynski, T; Papini, M

    2012-01-01

    A previous implementation of narrow-band level set methodology developed by the authors was extended to allow for the modelling of mask erosive wear in abrasive jet micro-machining (AJM). The model permits the prediction of the surface evolution of both the mask and the target simultaneously, by representing them as a hybrid and continuous mask–target surface. The model also accounts for the change in abrasive mass flux incident to both the target surface and, for the first time, the eroding mask edge, that is brought about by the presence of the mask edge itself. The predictions of the channel surface and eroded mask profiles were compared with measurements on channels machined in both glass and poly-methyl-methacrylate (PMMA) targets at both normal and oblique incidence, using tempered steel and elastomeric masks. A much better agreement between the predicted and measured profiles was found when mask wear was taken into account. Mask wear generally resulted in wider and deeper glass target profiles and wider PMMA target profiles, respectively, when compared to cases where no mask wear was present. This work has important implications for the AJM of complex MEMS and microfluidic devices that require longer machining times. (paper)

  15. Analysis of Fundus Fluorescein Angiogram Based on the Hessian Matrix of Directional Curvelet Sub-bands and Distance Regularized Level Set Evolution.

    Science.gov (United States)

    Soltanipour, Asieh; Sadri, Saeed; Rabbani, Hossein; Akhlaghi, Mohammad Reza

    2015-01-01

    This paper presents a new procedure for automatic extraction of the blood vessels and optic disk (OD) in fundus fluorescein angiogram (FFA). In order to extract blood vessel centerlines, the algorithm of vessel extraction starts with the analysis of directional images resulting from sub-bands of fast discrete curvelet transform (FDCT) in the similar directions and different scales. For this purpose, each directional image is processed by using information of the first order derivative and eigenvalues obtained from the Hessian matrix. The final vessel segmentation is obtained using a simple region growing algorithm iteratively, which merges centerline images with the contents of images resulting from modified top-hat transform followed by bit plane slicing. After extracting blood vessels from FFA image, candidates regions for OD are enhanced by removing blood vessels from the FFA image, using multi-structure elements morphology, and modification of FDCT coefficients. Then, canny edge detector and Hough transform are applied to the reconstructed image to extract the boundary of candidate regions. At the next step, the information of the main arc of the retinal vessels surrounding the OD region is used to extract the actual location of the OD. Finally, the OD boundary is detected by applying distance regularized level set evolution. The proposed method was tested on the FFA images from angiography unit of Isfahan Feiz Hospital, containing 70 FFA images from different diabetic retinopathy stages. The experimental results show the accuracy more than 93% for vessel segmentation and more than 87% for OD boundary extraction.

  16. Low- and intermediate level radioactive waste from Risoe, Denmark. Location studies for potential disposal areas. Report no. 3. Geological setting and tectonic framework in Denmark

    International Nuclear Information System (INIS)

    Schack Pedersen, S.A.; Gravesen, P.

    2011-01-01

    The low and intermediate level radioactive waste from Risoe (the nuclear reactor buildings plus different types of material from the research periods) and radioactive waste from hospitals and research institutes have to be stored in a final disposal in Denmark for at least 300 years. The Minister for Health and Prevention presented the background and decision plan for the Danish Parliament in January 2009. All political parties agreed on the plan. The task for the Geological Survey of Denmark and Greenland (GEUS) is to find approximately 20 areas potentially useful for a waste disposal. These 20 areas are afterwards reduced to 2-3 most optimal locations. At these 2-3 locations, detailed field investigations of the geological, hydrogeological - hydrochemical and technical conditions will be performed. This report provides an introduction to the geological setting of Denmark with the focus on providing an overview of the distribution of various tectonic and structural features. These are considered important in the context of choosing suitable areas for the location of a disposal for radioactive waste. The geological structures, deep and shallow are important for the selection of potential disposals basically because the structures describes the geometry of the areas. Additionally, the structures provides the information about the risk of unwanted movements of the geological layers around the disposal that have to be investigated and evaluated as a part of the selection process. (LN)

  17. Development of a human live attenuated West Nile infectious DNA vaccine: Identification of a minimal mutation set conferring the attenuation level acceptable for a human vaccine

    Energy Technology Data Exchange (ETDEWEB)

    Yamshchikov, Vladimir, E-mail: yaximik@gmail.com; Manuvakhova, Marina; Rodriguez, Efrain; Hébert, Charles

    2017-01-15

    ABSTRACT: For the development of a human West Nile (WN) infectious DNA (iDNA) vaccine, we created highly attenuated chimeric virus W1806 with the serological identity of highly virulent WN-NY99. Earlier, we attempted to utilize mutations found in the E protein of the SA14-14-2 vaccine to bring safety of W1806 to the level acceptable for human use (). Here, we analyzed effects of the SA14-14-2 changes on growth properties and neurovirulence of W1806. A set including the E138K, K279M, K439R and G447D changes was identified as the perspective subset for satisfying the target safety profile without compromising immunogenicity of the vaccine candidate. The genetic stability of the attenuated phenotype was found to be unsatisfactory being dependent on a subset of attenuating changes incorporated in W1806. Elucidation of underlying mechanisms influencing selection of pathways for restoration of the envelope protein functionality will facilitate resolution of the emerged genetic stability issue. - Highlights: •Effect of mutations in E on properties of WN1806 is determined. •A subset of attenuating mutations suitable for a human vaccine is defined. •Mechanism of attenuation is proposed and illustrated. •Underlying mechanisms of neurovirulence reversion are suggested.

  18. A Household Level Analysis of Water Sanitation Associated with Gastrointestinal Disease in an Urban Slum Setting of South Okkalapa Township, Myanmar

    Directory of Open Access Journals (Sweden)

    Zar Ni Hlaing

    2016-07-01

    Full Text Available This research analyzed the prevalence of water sanitation at the household level against gastrointestinal disease occurrence in the urban slum setting of South Okkalapa Township, Myanmar, using cross-sectional study design techniques. A total of 364 household respondents were interviewed face to face by well-trained research assistants using structured questionnaires. Chi-square tests and multiple logistic regression analyses were used to determine the association between independent and dependent variables. Results showed that the source of household water (OR: 13.58, 95% CI: 6.90-26.74, and the types of drinking water (OR: 1.85, 95% CI: 0.92-3.71, were significantly associated with gastrointestinal diseases (p-value<0.05. After adjustment for confounding factors, this study found that occupation (AOR: 2.63, 95% CI: 1.25-5.54, employment status (AOR: 2.25, 95% CI: 1.01-5.01, type of household toilet (AOR: 8.66, 95% CI: 4.03-18.60, sources of household water (AOR: 6.56, 95% CI: 2.86-15.08, and the method of vector control (AOR: 3.12, 95% CI: 1.37-7.30 were all significantly associated with gastrointestinal diseases (p-value<0.05. Health education and appropriate technology for household water, sanitary latrines, environmental sanitation and waste disposal, and the implementation of policies focusing on systematic water management are therefore urgently required to control the spread of waterborne diseases.

  19. Low- and intermediate level radioactive waste from Risoe, Denmark. Location studies for potential disposal areas. Report no. 3. Geological setting and tectonic framework in Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Schack Pedersen, S.A.; Gravesen, P.

    2011-07-01

    The low and intermediate level radioactive waste from Risoe (the nuclear reactor buildings plus different types of material from the research periods) and radioactive waste from hospitals and research institutes have to be stored in a final disposal in Denmark for at least 300 years. The Minister for Health and Prevention presented the background and decision plan for the Danish Parliament in January 2009. All political parties agreed on the plan. The task for the Geological Survey of Denmark and Greenland (GEUS) is to find approximately 20 areas potentially useful for a waste disposal. These 20 areas are afterwards reduced to 2-3 most optimal locations. At these 2-3 locations, detailed field investigations of the geological, hydrogeological - hydrochemical and technical conditions will be performed. This report provides an introduction to the geological setting of Denmark with the focus on providing an overview of the distribution of various tectonic and structural features. These are considered important in the context of choosing suitable areas for the location of a disposal for radioactive waste. The geological structures, deep and shallow are important for the selection of potential disposals basically because the structures describes the geometry of the areas. Additionally, the structures provides the information about the risk of unwanted movements of the geological layers around the disposal that have to be investigated and evaluated as a part of the selection process. (LN)

  20. Random walk and the heat equation

    CERN Document Server

    Lawler, Gregory F

    2010-01-01

    The heat equation can be derived by averaging over a very large number of particles. Traditionally, the resulting PDE is studied as a deterministic equation, an approach that has brought many significant results and a deep understanding of the equation and its solutions. By studying the heat equation by considering the individual random particles, however, one gains further intuition into the problem. While this is now standard for many researchers, this approach is generally not presented at the undergraduate level. In this book, Lawler introduces the heat equation and the closely related notion of harmonic functions from a probabilistic perspective. The theme of the first two chapters of the book is the relationship between random walks and the heat equation. The first chapter discusses the discrete case, random walk and the heat equation on the integer lattice; and the second chapter discusses the continuous case, Brownian motion and the usual heat equation. Relationships are shown between the two. For exa...

  1. Quantum qubit measurement by a quantum point contact with a quantum Langevin equation approach

    International Nuclear Information System (INIS)

    Dong, Bing; Lei, X.L.; Horing, N.J.M.; Cui, H.L.

    2007-01-01

    We employ a microscopic quantum Heisenberg-Langevin equation approach to establish a set of quantum Bloch equations for a two-level system (coupled quantum dots) capacitively coupled to a quantum point contact (QPC). The resulting Bloch equations facilitate our analysis of qubit relaxation and decoherence in coupled quantum dots induced by measurement processes at arbitrary bias-voltage and temperature. We also examine the noise spectrum of the meter output current for a symmetric qubit. These results help resolve a recent debate about a quantum oscillation peak in the noise spectrum. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  2. MO-D-211-01: Medical Physics Practice Guidelines - The Minimum Level of Medical Physics Support in Clinical Practice Settings.

    Science.gov (United States)

    Chan, M; Fontenot, J; Halvorsen, P

    2012-06-01

    The American Association of Physicists in Medicine (AAPM) has long advocated a consistent level of medical physics practice, and has published many guidelines and position statements toward that goal, such as Science Council Task Group reports related to calibration and quality assurance, Education Council and Professional Council Task Group reports related to education, training, and peer review, and Board-approved Position Statements related to the Scope of Practice, physicist qualifications, and other aspects of medical physicspractice. Despite these concerted and enduring efforts, the profession does not have a clear and concise statement of the acceptable practice guidelines for routine clinical medical physics. As accreditation of clinical practices becomes more common, Medical Physics Practice Guidelines (MPPGs) will be crucial to ensuring a consistent benchmark for accreditation programs. The AAPM will lead the development of MPPGs in collaboration with other professional societies. The MPPGs will be freely available to the general public. Accrediting organizations, regulatory agencies and legislators will be encouraged to reference these MPPGs when defining their respective requirements. MPPGs are intended to provide the medical community with a clear description of the minimum level of medical physics support that the AAPM would consider to be prudent in all clinical practice settings. Support includes but is not limited to staffing, equipment, machine access, and training. These MPPGs are not designed to replace extensive Task Group reports or review articles, but rather to describe the recommended minimum level of medical physics support for specific clinical services. This course will describe the purpose and scope of MPPGs, the procedure for the development of a MPPG, as well as the progress of Therapy MPPG TG #1 on "Evaluation and quality assurance of x-ray based image guided radiotherapy systems" and Diagnostic MPPG TG #2 on "CT Protocol management

  3. Multiple-level stakeholder engagement in malaria clinical trials: addressing the challenges of conducting clinical research in resource-limited settings.

    Science.gov (United States)

    Mtove, George; Kimani, Joshua; Kisinza, William; Makenga, Geofrey; Mangesho, Peter; Duparc, Stephan; Nakalembe, Miriam; Phiri, Kamija S; Orrico, Russell; Rojo, Ricardo; Vandenbroucke, Pol

    2018-03-22

    Multinational clinical trials are logistically complex and require close coordination between various stakeholders. They must comply with global clinical standards and are accountable to multiple regulatory and ethical bodies. In resource-limited settings, it is challenging to understand how to apply global clinical standards to international, national, and local factors in clinical trials, making multiple-level stakeholder engagement an important element in the successful conduct of these clinical trials. During the planning and implementation of a large multinational clinical trial for intermittent preventive treatment of malaria in pregnancy in resource-limited areas of sub-Saharan Africa, we encountered numerous challenges, which required implementation of a range of engagement measures to ensure compliance with global clinical and regulatory standards. These challenges included coordination with ongoing global malaria efforts, heterogeneity in national regulatory structures, sub-optimal healthcare infrastructure, local practices and beliefs, and perspectives that view healthcare providers with undue trust or suspicion. In addition to engagement with international bodies, such as the World Health Organization, the Malaria in Pregnancy Consortium, the Steve Biko Centre for Bioethics, and the London School of Hygiene and Tropical Medicine, in order to address the challenges just described, Pfizer Inc. and Medicines for Malaria Venture (the "Sponsoring Entities" for these studies) and investigators liaised with national- and district-level stakeholders such as health ministers and regional/local community health workers. Community engagement measures undertaken by investigators included local meetings with community leaders to explain the research aims and answer questions and concerns voiced by the community. The investigators also engaged with family members of prospective trial participants in order to be sensitive to local practices and beliefs. Engagement

  4. P-adic Schroedinger type equation

    International Nuclear Information System (INIS)

    Vladimirov, V.S.; Volovich, I.V.

    1988-12-01

    In p-adic quantum mechanics a Schroedinger type equation is considered. We discuss the appropriate notion of differential operators. A solution of the Schroedinger type equation is given. A new set of vacuum states for the p-adic quantum harmonic oscillator is presented. The correspondence principle with the standard quantum mechanics is discussed. (orig.)

  5. Basic linear partial differential equations

    CERN Document Server

    Treves, Francois

    1975-01-01

    Focusing on the archetypes of linear partial differential equations, this text for upper-level undergraduates and graduate students features most of the basic classical results. The methods, however, are decidedly nontraditional: in practically every instance, they tend toward a high level of abstraction. This approach recalls classical material to contemporary analysts in a language they can understand, as well as exploiting the field's wealth of examples as an introduction to modern theories.The four-part treatment covers the basic examples of linear partial differential equations and their

  6. Counting equations in algebraic attacks on block ciphers

    DEFF Research Database (Denmark)

    Knudsen, Lars Ramkilde; Miolane, Charlotte Vikkelsø

    2010-01-01

    This paper is about counting linearly independent equations for so-called algebraic attacks on block ciphers. The basic idea behind many of these approaches, e.g., XL, is to generate a large set of equations from an initial set of equations by multiplication of existing equations by the variables...... in the system. One of the most difficult tasks is to determine the exact number of linearly independent equations one obtain in the attacks. In this paper, it is shown that by splitting the equations defined over a block cipher (an SP-network) into two sets, one can determine the exact number of linearly...... independent equations which can be generated in algebraic attacks within each of these sets of a certain degree. While this does not give us a direct formula for the success of algebraic attacks on block ciphers, it gives some interesting bounds on the number of equations one can obtain from a given block...

  7. ALMOST PERIODIC SOLUTIONS TO SOME NONLINEAR DELAY DIFFERENTIAL EQUATION

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The existence of an almost periodic solutions to a nonlinear delay diffierential equation is considered in this paper. A set of sufficient conditions for the existence and uniqueness of almost periodic solutions to some delay diffierential equations is obtained.

  8. Generalized Callan-Symanzik equations and the Renormalization Group

    International Nuclear Information System (INIS)

    MacDowell, S.W.

    1975-01-01

    A set of generalized Callan-Symanzik equations derived by Symanzik, relating Green's functions with arbitrary number of mass insertions, is shown be equivalent to the new Renormalization Group equation proposed by S. Weinberg

  9. Convergence order vs. parallelism in the numerical simulation of the bidomain equations

    International Nuclear Information System (INIS)

    Sharomi, Oluwaseun; Spiteri, Raymond J

    2012-01-01

    The propagation of electrical activity in the human heart can be modelled mathematically by the bidomain equations. The bidomain equations represent a multi-scale reaction-diffusion model that consists of a set of ordinary differential equations governing the dynamics at the cellular level coupled with a set of partial differential equations governing the dynamics at the tissue level. Significant computation is generally required to generate clinically useful data from the bidomain equations. Contemporary developments in computer architecture, in particular multi- and many-core computers and graphics processing units, have made such computations feasible. However, the zeal to take advantage to parallel architectures has typically caused another important aspect of numerical methods for the solution of differential equations to be overlooked, namely the convergence order. It is well known that higher-order methods are generally more efficient than lower-order ones when solutions are smooth and relatively high accuracy is desired. In these situations, serial implementations of high-order methods may remain surprisingly competitive with parallel implementations of low-order methods. In this paper, we examine the effect of order on the numerical solution of the bidomain equations in parallel. We find that high-order methods, in particular high-order time-integration methods with relatively better stability properties, tend to outperform their low-order counterparts, even when the latter are run in parallel. In other words, increasing integration order often trumps increasing available computational resources, especially when relatively high accuracy is desired.

  10. Implicit methods for equation-free analysis: convergence results and analysis of emergent waves in microscopic traffic models

    DEFF Research Database (Denmark)

    Marschler, Christian; Sieber, Jan; Berkemer, Rainer

    2014-01-01

    We introduce a general formulation for an implicit equation-free method in the setting of slow-fast systems. First, we give a rigorous convergence result for equation-free analysis showing that the implicitly defined coarse-level time stepper converges to the true dynamics on the slow manifold...... against the direction of traffic. Equation-free analysis enables us to investigate the behavior of the microscopic traffic model on a macroscopic level. The standard deviation of cars' headways is chosen as the macroscopic measure of the underlying dynamics such that traveling wave solutions correspond...... to equilibria on the macroscopic level in the equation-free setup. The collapse of the traffic jam to the free flow then corresponds to a saddle-node bifurcation of this macroscopic equilibrium. We continue this bifurcation in two parameters using equation-free analysis....

  11. A consistent hierarchy of generalized kinetic equation approximations to the master equation applied to surface catalysis.

    Science.gov (United States)

    Herschlag, Gregory J; Mitran, Sorin; Lin, Guang

    2015-06-21

    We develop a hierarchy of approximations to the master equation for systems that exhibit translational invariance and finite-range spatial correlation. Each approximation within the hierarchy is a set of ordinary differential equations that considers spatial correlations of varying lattice distance; the assumption is that the full system will have finite spatial correlations and thus the behavior of the models within the hierarchy will approach that of the full system. We provide evidence of this convergence in the context of one- and two-dimensional numerical examples. Lower levels within the hierarchy that consider shorter spatial correlations are shown to be up to three orders of magnitude faster than traditional kinetic Monte Carlo methods (KMC) for one-dimensional systems, while predicting similar system dynamics and steady states as KMC methods. We then test the hierarchy on a two-dimensional model for the oxidation of CO on RuO2(110), showing that low-order truncations of the hierarchy efficiently capture the essential system dynamics. By considering sequences of models in the hierarchy that account for longer spatial correlations, successive model predictions may be used to establish empirical approximation of error estimates. The hierarchy may be thought of as a class of generalized phenomenological kinetic models since each element of the hierarchy approximates the master equation and the lowest level in the hierarchy is identical to a simple existing phenomenological kinetic models.

  12. The incidence of severe hypoglycaemia in pregnant women with type 1 diabetes mellitus can be reduced with unchanged HbA1c levels and pregnancy outcomes in a routine care setting

    DEFF Research Database (Denmark)

    Ringholm, Lene; Secher, A L; Pedersen-Bjergaard, U

    2013-01-01

    To investigate whether the incidence of severe hypoglycaemia in pregnant women with type 1 diabetes can be reduced without deteriorating HbA1c levels or pregnancy outcomes in a routine care setting....

  13. Evolution equations for Killing fields

    International Nuclear Information System (INIS)

    Coll, B.

    1977-01-01

    The problem of finding necessary and sufficient conditions on the Cauchy data for Einstein equations which insure the existence of Killing fields in a neighborhood of an initial hypersurface has been considered recently by Berezdivin, Coll, and Moncrief. Nevertheless, it can be shown that the evolution equations obtained in all these cases are of nonstrictly hyperbolic type, and, thus, the Cauchy data must belong to a special class of functions. We prove here that, for the vacuum and Einstein--Maxwell space--times and in a coordinate independent way, one can always choose, as evolution equations for the Killing fields, a strictly hyperbolic system: The above theorems can be thus extended to all Cauchy data for which the Einstein evolution problem has been proved to be well set

  14. Clinical course and outcome of patients with high-level microsatellite instability cancers in a real-life setting: a retrospective analysis

    Directory of Open Access Journals (Sweden)

    Halpern N

    2017-03-01

    Full Text Available Naama Halpern,1 Yael Goldberg,2 Luna Kadouri,2 Morasha Duvdevani,2 Tamar Hamburger,2 Tamar Peretz,2 Ayala Hubert2 1Institute of Oncology, The Chaim Sheba Medical Center, Tel Hashomer, Israel; 2Sharett Institute of Oncology, Hadassah Medical Center, Hebrew University, Jerusalem, Israel Background: The prognostic and predictive significance of the high-level microsatellite instability (MSI-H phenotype in various malignancies is unclear. We describe the characteristics, clinical course, and outcomes of patients with MSI-H malignancies treated in a real-life hospital setting.Patients and methods: A retrospective analysis of MSI-H cancer patient files was conducted. We analyzed the genetic data, clinical characteristics, and oncological treatments, including chemotherapy and surgical interventions.Results: Clinical data of 73 MSI-H cancer patients were available. Mean age at diagnosis of first malignancy was 52.3 years. Eight patients (11% had more than four malignancies each. Most patients (76% had colorectal cancer (CRC. Seventeen patients (23% had only extracolonic malignancies. Eighteen women (36% had gynecological malignancy. Nine women (18% had breast cancer. Mean follow-up was 8.5 years. Five-year overall survival and disease-free survival of all MSI-H cancer patients from first malignancy were 86% and 74.6%, respectively. Five-year overall survival rates of stage 2, 3, and 4 MSI-H CRC patients were 89.5%, 58.4%, and 22.9%, respectively.Conclusion: Although the overall prognosis of MSI-H cancer patients is favorable, this advantage may not be maintained in advanced MSI-H CRC patients. Keywords: microsatellite instability, malignancy, treatment, outcome

  15. Analysis of carotid artery plaque and wall boundaries on CT images by using a semi-automatic method based on level set model

    International Nuclear Information System (INIS)

    Saba, Luca; Sannia, Stefano; Ledda, Giuseppe; Gao, Hao; Acharya, U.R.; Suri, Jasjit S.

    2012-01-01

    The purpose of this study was to evaluate the potentialities of a semi-automated technique in the detection and measurement of the carotid artery plaque. Twenty-two consecutive patients (18 males, 4 females; mean age 62 years) examined with MDCTA from January 2011 to March 2011 were included in this retrospective study. Carotid arteries are examined with a 16-multi-detector-row CT system, and for each patient, the most diseased carotid was selected. In the first phase, the carotid plaque was identified and one experienced radiologist manually traced the inner and outer boundaries by using polyline and radial distance method (PDM and RDM, respectively). In the second phase, the carotid inner and outer boundaries were traced with an automated algorithm: level-set-method (LSM). Data were compared by using Pearson rho correlation, Bland-Altman, and regression. A total of 715 slices were analyzed. The mean thickness of the plaque using the reference PDM was 1.86 mm whereas using the LSM-PDM was 1.96 mm; using the reference RDM was 2.06 mm whereas using the LSM-RDM was 2.03 mm. The correlation values between the references, the LSM, the PDM and the RDM were 0.8428, 0.9921, 0.745 and 0.6425. Bland-Altman demonstrated a very good agreement in particular with the RDM method. Results of our study indicate that LSM method can automatically measure the thickness of the plaque and that the best results are obtained with the RDM. Our results suggest that advanced computer-based algorithms can identify and trace the plaque boundaries like an experienced human reader. (orig.)

  16. Analysis of carotid artery plaque and wall boundaries on CT images by using a semi-automatic method based on level set model

    Energy Technology Data Exchange (ETDEWEB)

    Saba, Luca; Sannia, Stefano; Ledda, Giuseppe [University of Cagliari - Azienda Ospedaliero Universitaria di Cagliari, Department of Radiology, Monserrato, Cagliari (Italy); Gao, Hao [University of Strathclyde, Signal Processing Centre for Excellence in Signal and Image Processing, Department of Electronic and Electrical Engineering, Glasgow (United Kingdom); Acharya, U.R. [Ngee Ann Polytechnic University, Department of Electronics and Computer Engineering, Clementi (Singapore); Suri, Jasjit S. [Biomedical Technologies Inc., Denver, CO (United States); Idaho State University (Aff.), Pocatello, ID (United States)

    2012-11-15

    The purpose of this study was to evaluate the potentialities of a semi-automated technique in the detection and measurement of the carotid artery plaque. Twenty-two consecutive patients (18 males, 4 females; mean age 62 years) examined with MDCTA from January 2011 to March 2011 were included in this retrospective study. Carotid arteries are examined with a 16-multi-detector-row CT system, and for each patient, the most diseased carotid was selected. In the first phase, the carotid plaque was identified and one experienced radiologist manually traced the inner and outer boundaries by using polyline and radial distance method (PDM and RDM, respectively). In the second phase, the carotid inner and outer boundaries were traced with an automated algorithm: level-set-method (LSM). Data were compared by using Pearson rho correlation, Bland-Altman, and regression. A total of 715 slices were analyzed. The mean thickness of the plaque using the reference PDM was 1.86 mm whereas using the LSM-PDM was 1.96 mm; using the reference RDM was 2.06 mm whereas using the LSM-RDM was 2.03 mm. The correlation values between the references, the LSM, the PDM and the RDM were 0.8428, 0.9921, 0.745 and 0.6425. Bland-Altman demonstrated a very good agreement in particular with the RDM method. Results of our study indicate that LSM method can automatically measure the thickness of the plaque and that the best results are obtained with the RDM. Our results suggest that advanced computer-based algorithms can identify and trace the plaque boundaries like an experienced human reader. (orig.)

  17. Application de X-FEM et des level-sets à l'homogénéisation de matériaux aléatoires caractérisés par imagerie numérique

    OpenAIRE

    Ionescu , Irina; Moës , Nicolas; Cartraud , Patrice; Béringhier , Marianne

    2007-01-01

    International audience; The advances of material characterization by means of imaging techniques require powerful computational methods for numerical analyses. This paper focuses on the advantages of coupling the X-FEM and level sets to solve microstructures with complex geometry. The level set information is obtained from a digital image and then used within a X-FEM computation, where the mesh does not need to conform to the material interface. An example of homogeniza-tion is presented.; La...

  18. The Moderating Effect of Health-Improving Workplace Environment on Promoting Physical Activity in White-Collar Employees: A Multi-Site Longitudinal Study Using Multi-Level Structural Equation Modeling.

    Science.gov (United States)

    Watanabe, Kazuhiro; Otsuka, Yasumasa; Shimazu, Akihito; Kawakami, Norito

    2016-02-01

    This longitudinal study aimed to investigate the moderating effect of health-improving workplace environment on relationships between physical activity, self-efficacy, and psychological distress. Data were collected from 16 worksites and 129 employees at two time-points. Health-improving workplace environment was measured using the Japanese version of the Environmental Assessment Tool. Physical activity, self-efficacy, and psychological distress were also measured. Multi-level structural equation modeling was used to investigate the moderating effect of health-improving workplace environment on relationships between psychological distress, self-efficacy, and physical activity. Psychological distress was negatively associated with physical activity via low self-efficacy. Physical activity was negatively related to psychological distress. Physical activity/fitness facilities in the work environment exaggerated the positive relationship between self-efficacy and physical activity. Physical activity/fitness facilities in the workplace may promote employees' physical activity.

  19. Introduction to differential equations

    CERN Document Server

    Taylor, Michael E

    2011-01-01

    The mathematical formulations of problems in physics, economics, biology, and other sciences are usually embodied in differential equations. The analysis of the resulting equations then provides new insight into the original problems. This book describes the tools for performing that analysis. The first chapter treats single differential equations, emphasizing linear and nonlinear first order equations, linear second order equations, and a class of nonlinear second order equations arising from Newton's laws. The first order linear theory starts with a self-contained presentation of the exponen

  20. Nonlinear evolution equations

    CERN Document Server

    Uraltseva, N N

    1995-01-01

    This collection focuses on nonlinear problems in partial differential equations. Most of the papers are based on lectures presented at the seminar on partial differential equations and mathematical physics at St. Petersburg University. Among the topics explored are the existence and properties of solutions of various classes of nonlinear evolution equations, nonlinear imbedding theorems, bifurcations of solutions, and equations of mathematical physics (Navier-Stokes type equations and the nonlinear Schrödinger equation). The book will be useful to researchers and graduate students working in p