Breathing Life into Engineering: A Lesson Study Life Science Lesson

Science.gov (United States)

Lawrence, Maria; Yang, Li-Ling; Briggs, May; Hession, Alicia; Koussa, Anita; Wagoner, Lisa

2016-01-01

A fifth grade life science lesson was implemented through a lesson study approach in two fifth grade classrooms. The research lesson was designed by a team of four elementary school teachers with the goal of emphasizing engineering practices consistent with the "Next Generation Science Standards" (NGSS) (Achieve Inc. 2013). The fifth…

The Knitting Lesson.

Science.gov (United States)

Smith, Pamela

1987-01-01

Based on Jean-Francois Millet's 1869 painting, "The Knitting Lesson," this lesson's goal is to introduce students in grades seven through nine to genre (everyday life) painting the nineteenth century. The lesson is also designed to show that some aspects of genre may be timeless. (BSR)

Designing and Operating for Safeguards: Lessons Learned From the Rokkasho Reprocessing Plant (RRP)

International Nuclear Information System (INIS)

Johnson, Shirley J.; Ehinger, Michael

2010-01-01

This paper will address the lessons learned during the implementation of International Atomic Energy Agency (IAEA) safeguards at the Rokkasho Reprocessing Plant (RRP) which are relevant to the issue of 'safeguards by design'. However, those lessons are a result of a cumulative history of international safeguards experiences starting with the West Valley reprocessing plant in 1969, continuing with the Barnwell plant, and then with the implementation of international safeguards at WAK in Germany and TRP in Japan. The design and implementation of safeguards at RRP in Japan is the latest and most challenging that the IAEA has faced. This paper will discuss the work leading up to the development of a safeguards approach, the design and operating features that were introduced to improve or aid in implementing the safeguards approach, and the resulting recommendations for future facilities. It will provide an overview of how 'safeguardability' was introduced into RRP.

Research-design model for professional development of teachers: Designing lessons with physics education research

Science.gov (United States)

Eylon, Bat-Sheva; Bagno, Esther

2006-12-01

How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER) and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6) developed during a year and a half (about 330h ), several lessons (minimodules) dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a) Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b) teachers’ knowledge of physics and physics pedagogy; (c) a systematic research-based approach to the design of lessons; (d) the formation of a community of practice; and (e) acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Research-design model for professional development of teachers: Designing lessons with physics education research

Directory of Open Access Journals (Sweden)

Esther Bagno

2006-09-01

Full Text Available How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6 developed during a year and a half (about 330 h , several lessons (minimodules dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b teachers’ knowledge of physics and physics pedagogy; (c a systematic research-based approach to the design of lessons; (d the formation of a community of practice; and (e acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Research-design model for professional development of teachers: Designing lessons with physics education research

Directory of Open Access Journals (Sweden)

Bat-Sheva Eylon

2006-09-01

Full Text Available How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6 developed during a year and a half (about 330h, several lessons (minimodules dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b teachers’ knowledge of physics and physics pedagogy; (c a systematic research-based approach to the design of lessons; (d the formation of a community of practice; and (e acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Lessons learned from MELOX plant operation and support to design of new MOX fuel fabrication plants

International Nuclear Information System (INIS)

Tourre, Joel; Gattegno, Robert; Guay, Philippe; Bariteau, Jean-Pierre

2005-01-01

AREVA is participating in the design of the US MOX Fuel Fabrication Facility (MFFF). To support this project and allow the U.S. Department of Energy (DOE) client to reap full benefit from the MELOX operating experience, AREVA, through COGEMA and its engineering subsidiary SGN have implemented a rigorous process to prudently apply MELOX Lessons Learned to the MFFF design. This paper describes the Lessons Learned process, how the process supports the advancement of fuel fabrication technology and, how the results of the process are benefiting the client. (author)

Lessons learned from the design and implementation of distributed post-WIMP user interfaces

OpenAIRE

Seifried, Thomas; Jetter, Hans-Christian; Haller, Michael; Reiterer, Harald

2011-01-01

Creating novel user interfaces that are “natural” and distributed is challenging for designers and developers. “Natural” interaction techniques are barely standardized and in combination with distributed UIs additional technical difficulties arise. In this paper we present the lessons we have learned in developing several natural and distributed user interfaces and propose design patterns to support development of such applications.

Safety Requirements / Design Criteria for SFR. Lessons Learned from the Fukushima Dai-ichi Accident

International Nuclear Information System (INIS)

Yllera, Javier

2013-01-01

After the Fukushima event (March 2011) the IAEA has started an action to review and revise, if necessary, all Safety Standards to take into consideration the lessons learned from the accident. The Safety Standards that need to be revised have been identified. A Prioritization Approach has been established: The first priority is to review safety guides applicable for NPPs and spent fuel storage with focus on the measures for the prevention and mitigation of severe accident due to external hazards - ● Regulatory framework, Safety assessment, Management system, Radiation protection and Emergency Preparedness and response; ● Sitting, Design, Operation of NPPs ● Decommissioning and Waste Management. Original sources for lessons learned: IAE fact Finding Mission, Japan´s report to the Ministerial Conference, INSAG Report, etc. Later, other lesson sources considered

Outsourced design services lessons learned from LHC civil engineering

CERN Document Server

Watson, T

2003-01-01

In April 1996 CERN awarded three contracts for the provision of civil engineering design and site supervision services associated with the LHC Project. These three contracts with an average value at signature of 12MCHF were placed using the “two envelope” award system. Eight firms from six member states were integrated into three Joint Ventures. For Projects prior to the LHC, CERN would have carried out the design and supervision using in-house staff. The change to out-sourced services represented a major step for CERN. After seven years, the contracts are now coming to their conclusion. This paper aims to discuss the reasons why these contracts were originally implemented, the lessons than have been learnt over the last seven years and conclusions on how CERN could approach the need for civil engineering design services in the future.

Designing and Operating for Safeguards: Lessons Learned From the Rokkasho Reprocessing Plant (RRP)

Energy Technology Data Exchange (ETDEWEB)

Johnson, Shirley J.; Ehinger, Michael

2010-08-07

This paper will address the lessons learned during the implementation of International Atomic Energy Agency (IAEA) safeguards at the Rokkasho Reprocessing Plant (RRP) which are relevant to the issue of ‘safeguards by design’. However, those lessons are a result of a cumulative history of international safeguards experiences starting with the West Valley reprocessing plant in 1969, continuing with the Barnwell plant, and then with the implementation of international safeguards at WAK in Germany and TRP in Japan. The design and implementation of safeguards at RRP in Japan is the latest and most challenging that the IAEA has faced. This paper will discuss the work leading up to the development of a safeguards approach, the design and operating features that were introduced to improve or aid in implementing the safeguards approach, and the resulting recommendations for future facilities. It will provide an overview of how ‘safeguardability’ was introduced into RRP.

Designing a database for performance assessment: Lessons learned from WIPP

International Nuclear Information System (INIS)

Martell, M.A.; Schenker, A.

1997-01-01

The Waste Isolation Pilot Plant (WIPP) Compliance Certification Application (CCA) Performance Assessment (PA) used a relational database that was originally designed only to supply the input parameters required for implementation of the PA codes. Reviewers used the database as a point of entry to audit quality assurance measures for control, traceability, and retrievability of input information used for analysis, and output/work products. During these audits it became apparent that modifications to the architecture and scope of the database would benefit the EPA regulator and other stakeholders when reviewing the recertification application. This paper contains a discussion of the WPP PA CCA database and lessons learned for designing a database

Designing Innovative Lessons Plans to Support the Next Generation Science Standards (NGSS)

Science.gov (United States)

Passow, M. J.

2013-12-01

The Next Generation Science Standards (NGSS) issued earlier in 2013 provide the opportunity to enhance pre-college curricula through a new focus on the ';Big Ideas' in Science, more attention to reading and writing skills needed for college and career readiness, and incorporation of engineering and technology. We introduce a set of lesson plans about scientific ocean drilling which can serve as a exemplars for developing curricula to meet NGSS approaches. Designed for middle and high school students, these can also be utilized in undergraduate courses. Development of these lessons was supported through a grant from the Deep Earth Academy of the Consortium for Ocean Leadership. They will be disseminated through websites of the Deep Earth Academy (http://www.oceanleadership.org/education/deep-earth-academy/) and Earth2Class Workshops for Teachers (http://www.earth2class.org), as well as through workshops at science education conferences sponsored by the National Earth Science Teachers Association (www.nestanet.org) and other organizations. Topics include 'Downhole Logging,' 'Age of the Ocean Floors,' 'Tales of the Resolution,' and 'Continental Shelf Sediments and Climate Change Patterns.' 'Downhole Logging' focuses on the engineering and technology utilized to obtain more information about sediments and rocks cored by the JOIDES Resolution scientific drilling vessel. 'Age of the Ocean Floor' incorporates the GeoMap App visualization tools (http://www.geomapapp.org/) to compare sea bottom materials in various parts of the world. 'Tales of the Resolution' is a series of ';graphic novels' created to describe the scientific discoveries, refitting of the JOIDES Resolution, and variety of careers available in the marine sciences (http://www.ldeo.columbia.edu/BRG/outreach/media/tales/). The fourth lesson focuses on discoveries made during Integrated Ocean Drilling Program Expedition 313, which investigated patterns in the sediments beneath the continental shelf off New

Experiences with effects specifications

DEFF Research Database (Denmark)

Simonsen, Jesper; Hertzum, Morten; Barlach, Anders

2011-01-01

We describe the effects-specification process from a project that was conducted during the fall 2010 and spring of 2011 in this chapter. The project configured and implemented an electronic patient record system at a maternity ward at a hospital located in a European region. The process comprised...... workshops with effects specification with management and end-users and an agile development process including prototypes configured from the effects specifications. We describe the project and the effects-specification process through which effects were related to the system design and instruments...... for measuring effects were designed. The project is analyzed and lessons learned are discussed....

Learning design Rashomon I – supporting the design of one lesson through different approaches

Directory of Open Access Journals (Sweden)

Donatella Persico

2013-08-01

Full Text Available This paper presents and compares a variety of approaches that have been developed to guide the decision-making process in learning design. Together with the companion Learning Design Rashomon II (Prieto et al., 2013, devoted to existing tools to support the same process, it aims to provide a view on relevant research results in this field. The common thread followed in these two contributions is inspired by Kurosawa's Rashomon film, which takes multiple perspectives on the same action. Similarly, in this paper, Rashomon I, a lesson on “Healthy Eating” is analysed according to five different approaches, while the Rashomon II paper is used to exemplify the affordances of different tools. For this reason, this paper does not follow the conventional structure of research papers (research question, method, results and discussion, but rather it moves from an introduction providing the rationale for the paper, to a description of the five different approaches to learning design (the 4SPPIces Model, the 4Ts, the e-Design Template, the Design Principles Database and the Design Narrative and then to a discussion of their similarities and differences to inform the choice of potential users.

Can lessons designed with Gestalt laws of visual perception improve students' understanding of the phases of the moon?

Science.gov (United States)

Wistisen, Michele

There has been limited success teaching elementary students about the phases of the moon using diagrams, personal observations, and manipulatives. One possible reason for this is that instruction has failed to apply Gestalt principles of perceptual organization to the lesson materials. To see if fourth grade students' understanding could be improved, four lessons were designed and taught using the Gestalt laws of Figure-Ground, Symmetry, and Similarity. Students (n = 54) who were taught lessons applying the Gestalt principles scored 12% higher on an assessment than students (n = 51) who only were taught lessons using the traditional methods. Though scores showed significant improvement, it is recommended to follow the American Association for the Advancement of Science guidelines and wait until 9th grade to instruct students about the phases.

Constellation Program Lessons Learned. Volume 2; Detailed Lessons Learned

Science.gov (United States)

Rhatigan, Jennifer; Neubek, Deborah J.; Thomas, L. Dale

2011-01-01

These lessons learned are part of a suite of hardware, software, test results, designs, knowledge base, and documentation that comprises the legacy of the Constellation Program. The context, summary information, and lessons learned are presented in a factual format, as known and described at the time. While our opinions might be discernable in the context, we have avoided all but factually sustainable statements. Statements should not be viewed as being either positive or negative; their value lies in what we did and what we learned that is worthy of passing on. The lessons include both "dos" and "don ts." In many cases, one person s "do" can be viewed as another person s "don t"; therefore, we have attempted to capture both perspectives when applicable and useful. While Volume I summarizes the views of those who managed the program, this Volume II encompasses the views at the working level, describing how the program challenges manifested in day-to-day activities. Here we see themes that were perhaps hinted at, but not completely addressed, in Volume I: unintended consequences of policies that worked well at higher levels but lacked proper implementation at the working level; long-term effects of the "generation gap" in human space flight development, the need to demonstrate early successes at the expense of thorough planning, and the consequences of problems and challenges not yet addressed because other problems and challenges were more immediate or manifest. Not all lessons learned have the benefit of being operationally vetted, since the program was cancelled shortly after Preliminary Design Review. We avoid making statements about operational consequences (with the exception of testing and test flights that did occur), but we do attempt to provide insight into how operational thinking influenced design and testing. The lessons have been formatted with a description, along with supporting information, a succinct statement of the lesson learned, and

"Frankenstein." [Lesson Plan].

Science.gov (United States)

Simon, Melanie

Based on Mary Shelley's novel "Frankenstein," this lesson plan presents activities designed to help students understand that active readers interpret a novel (its characters, plot, setting, and theme) in different ways; and the great literature can be and has been adapted in many ways over time. The main activity of the lesson involves students…

An Analysis of Lessons in Self-Management. The specific issue of contributions and resource distribution

Directory of Open Access Journals (Sweden)

Ana Inés Heras Monner Sans

2015-06-01

Full Text Available Results from a collaborative ethnographic and sociolinguistic study are presented to analyze lessons in self-managed organizations in contemporary Argentina. We build on Bleger´s (2007 classic definition of “learning” in order to construct an inter-disciplinary analytical frame to interpret the specific characteristics found in these groups, according to their general orientation towards autonomy as a human project (Castoriadis, 1997, 2007. Our analysis shows the complexities associated to this framework, as well as the specific abilities that are continually learned by participants within self-management as an organizational context.

Design and Evaluation of a Smart Device Science Lesson to Improve Students’ Inquiry Skills

NARCIS (Netherlands)

Siiman, Leo A.; Pedaste, Margus; Mäeots, Mario; Leijen, Äli; Rannikmäe, Miia; Zacharia, Zacharias C.; de Jong, Anthonius J.M.; Xie, Haoran; Popescu, Elvira; Hancke, Gerhard; Fernández Manjón, Baltasar

The prevalence of smart devices among young people is undeniably large, but concerns that they distract learning may be limiting their use in schools. In this study we demonstrate how tablet computers can be used effectively for teaching science. A digital biology lesson was designed in the Go-Lab

EOS MLS Lessons Learned: Design Ideas for Safer and Lower Cost Operations

Science.gov (United States)

Miller, Dominick

2012-01-01

The Earth Observing System (EOS) Microwave Limb Sounder (MLS) is a complex instrument with a front end computer and 32 subsystem computers. MLS is one of four instruments on NASA's EOS Aura spacecraft With almost 8 years in orbit, MLS has a few lessons learned which can be applied during the design phase of future instruments to effect better longevity, more robust operations and a significant cost benefit during operations phase.

Design and Implementation of a Self-Directed Stereochemistry Lesson Using Embedded Virtual Three-Dimensional Images in a Portable Document Format

Science.gov (United States)

Cody, Jeremy A.; Craig, Paul A.; Loudermilk, Adam D.; Yacci, Paul M.; Frisco, Sarah L.; Milillo, Jennifer R.

2012-01-01

A novel stereochemistry lesson was prepared that incorporated both handheld molecular models and embedded virtual three-dimensional (3D) images. The images are fully interactive and eye-catching for the students; methods for preparing 3D molecular images in Adobe Acrobat are included. The lesson was designed and implemented to showcase the 3D…

An Analysis of Lessons in Self-Management. The specific issue of contributions and resource distribution

OpenAIRE

Ana Inés Heras Monner Sans

2015-01-01

Results from a collaborative ethnographic and sociolinguistic study are presented to analyze lessons in self-managed organizations in contemporary Argentina. We build on Bleger´s (2007) classic definition of “learning” in order to construct an inter-disciplinary analytical frame to interpret the specific characteristics found in these groups, according to their general orientation towards autonomy as a human project (Castoriadis, 1997, 2007). Our analysis shows the complexities associated to ...

TMI-2 Lessons Learned Task Force. Final report

International Nuclear Information System (INIS)

1979-10-01

In its final report reviewing the Three Mile Island accident, the TMI-2 Lessons Learned Task Force has suggested change in several fundamental aspects of basic safety policy for nuclear power plants. Changes in nuclear power plant design and operations and in the regulatory process are discussed in terms of general goals. The appendix sets forth specific recommendations for reaching these goals

Lessons Learned from the Node 1 Atmosphere Control and Storage and Water Recovery and Management Subsystem Design

Science.gov (United States)

Williams, David E.

2011-01-01

Node 1 flew to the International Space Station (ISS) on Flight 2A during December 1998. To date the National Aeronautics and Space Administration (NASA) has learned a lot of lessons from this module based on its history of approximately two years of acceptance testing on the ground and currently its twelve years on-orbit. This paper will provide an overview of the ISS Environmental Control and Life Support (ECLS) design of the Node 1 Atmosphere Control and Storage (ACS) and Water Recovery and Management (WRM) subsystems and it will document some of the lessons that have been learned to date for these subsystems based on problems prelaunch, problems encountered on-orbit, and operational problems/concerns. It is hoped that documenting these lessons learned from ISS will help in preventing them in future Programs.

Lessons Learned from Design and Construction of New US Nuclear Facility

International Nuclear Information System (INIS)

Seamans, S. E.; Horvath, D. A.

2012-01-01

For reasons related to licensing uncertainty, economic slowdown, and questionable financial backing, no new nuclear facility projects have been undertaken in the United States since the Three Mile Island Incident in 1979; however, a need for such facilities (both nuclear power plants and nuclear fuel facilities) continues and various incentives leading to the start of a nuclear renaissance have occurred. One incentive is a complete overhaul by the US Nuclear Regulatory Commission of the earlier two step licensing process under 10 CFR 50. The earlier approach required first a construction permit and then an operating license, whereas the new approach allows a more streamlined (one step) combined license (COL) approach utilizing Standard Design Certifications via the regulatory framework created by 10 CFR 52. Other incentives include US Government backed loan guarantees as well as private company contributions. One aspect to the new process has been consideration and implementation of many new topic-specific regulations and industry standards which have continued to evolve during the past 30 years in spite of the lack of new plant design and construction activity. Therefore, an Owner attempting a new nuclear facility project under 10 CFR 52 needs to address a myriad of new requirements previously unconsidered. Several new projects including both power plants and fuel facilities have begun the new licensing process with its many new requirements to consider, but a uranium enrichment facility has run the gamut first. This paper will summarize many of the lessons learned from designing, constructing and testing this first new nuclear facility to be built in the US in over 30 years.(author).

Beautiful Beads: A Lesson in Making Beads with Friendly Clay. AMACO[R] Lesson.

Science.gov (United States)

Gamble, Harriet; Gamble, David

This lesson resource includes a brief summary of the history of bead making and historic fascination with beads as adornment. A focus on design elements, color theory, craftsmanship, and technical skill in bead making is encouraged. The plan includes lesson goals and objectives; background preparation; a glossary of terms; a list of supplies; and…

Design and Implementation of a Pilot Obesity Prevention Program in a Low-Resource School: Lessons Learned and Research Recommendations

Science.gov (United States)

Baskin, Monica L.; Zunker, Christie; Worley, Courtney B.; Dial, Brenda; Kimbrough, Linda

2009-01-01

Purpose: This paper seeks to describe the design, implementation, and lessons learned from an obesity prevention pilot program delivered in a low resource school in the USA. Design/methodology/approach: A planned program evaluation was conducted to: document explicitly the process of designing and implementing the program; and assess the…

Planning geometry lessons with learning platforms

DEFF Research Database (Denmark)

Tamborg, Andreas Lindenskov

mathematics teachers’ joint planning of a lesson in geometry with a learning platform called Meebook is analyzed using the instrumental approach. It is concluded that the interface in Meebook orients the teachers work toward what the students should do rather than what they should learn, although the latter......This paper investigates how mathematics teachers plan lessons with a recently implemented Danish learning platform designed to support teachers in planning lessons in line with a recent objective-oriented curriculum. Drawing on data from observations of and interviews with teachers, three...... is a key intention behind the implementation of the platform. It is also concluded that when the teachers succeed in using learning objectives actively in their planning, the objectives support the teachers in designing lessons that correspond with their intentions. The paper concludes with a discussion...

Analysing the Integration of Engineering in Science Lessons with the Engineering-Infused Lesson Rubric

Science.gov (United States)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-01-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons…

Specifications in early conceptual design work

DEFF Research Database (Denmark)

Hansen, Claus Thorp; Andreasen, Mogens Myrup

2007-01-01

In early conceptual design the design team is working in an uncertain situation, where the understanding of a need is limited and not much is known about the solution space. In this situation the design team has to both analyse need and explore solution space. Thus, the team has to formulate design...... specifications, which express attractive product goals, and has to synthesise the product idea. The authors of this paper see a challenge to enhance and improve our understanding of the nature of design specifications as a means to support the synthesis of a product idea. In this empirical study we analyse...... the structure and content of design specifications during early ideation activities, where initial design specifications are formulated and a product idea is synthesised. We have analysed specification documents of 19 teams of novice designers. Our analysis indicates that a productive product design...

Lessons Learned From Community-Based Approaches to Sodium Reduction

Science.gov (United States)

Kane, Heather; Strazza, Karen; Losby PhD, Jan L.; Lane, Rashon; Mugavero, Kristy; Anater, Andrea S.; Frost, Corey; Margolis, Marjorie; Hersey, James

2017-01-01

Purpose This article describes lessons from a Centers for Disease Control and Prevention initiative encompassing sodium reduction interventions in six communities. Design A multiple case study design was used. Setting This evaluation examined data from programs implemented in six communities located in New York (Broome County, Schenectady County, and New York City); California (Los Angeles County and Shasta County); and Kansas (Shawnee County). Subjects Participants (n = 80) included program staff, program directors, state-level staff, and partners. Measures Measures for this evaluation included challenges, facilitators, and lessons learned from implementing sodium reduction strategies. Analysis The project team conducted a document review of program materials and semi structured interviews 12 to 14 months after implementation. The team coded and analyzed data deductively and inductively. Results Five lessons for implementing community-based sodium reduction approaches emerged: (1) build relationships with partners to understand their concerns, (2) involve individuals knowledgeable about specific venues early, (3) incorporate sodium reduction efforts and messaging into broader nutrition efforts, (4) design the program to reduce sodium gradually to take into account consumer preferences and taste transitions, and (5) identify ways to address the cost of lower-sodium products. Conclusion The experiences of the six communities may assist practitioners in planning community-based sodium reduction interventions. Addressing sodium reduction using a community-based approach can foster meaningful change in dietary sodium consumption. PMID:24575726

Analysing the integration of engineering in science lessons with the Engineering-Infused Lesson Rubric

Science.gov (United States)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-09-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons were selected at random from three online repositories, and coded with the rubric. Overall results documented the strengths of existing lessons, as well as many components that teachers might strengthen. In addition, a subset of characteristics was found to distinguish lessons with the highest level of engineering infusion. Findings are discussed in relation to the potential of the rubric to help teachers use research evidence-informed practice generally, and in relation to the new content demands of the U.S. Next Generation Science Standards, in particular.

Lessons learned from AU PSO-missions in Africa

DEFF Research Database (Denmark)

Mandrup, Thomas

The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO.......The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO....

Small Satellite Mechanical Design Experience

OpenAIRE

Meyers, Stewart

1993-01-01

The design approach used and the experience gained in the building of four small satellite payloads is explained. Specific recommendations are made and the lessons learned on the SAMPEX program are detailed.

Design for Visual Arts.

Science.gov (United States)

Skeries, Larry

Experiences suggested within this visual arts packet provide high school students with awareness of visual expression in graphic design, product design, architecture, and crafts. The unit may be used in whole or in part and includes information about art careers and art-related jobs found in major occupational fields. Specific lesson topics…

US Department of Energy natural phenomena design/evaluation guidelines/lessons learned

International Nuclear Information System (INIS)

Conrads, T.J.

1991-08-01

In the spring of 1988, DOE Order 6430.1A, General Design Criteria [1], was issued for use. This document references UCRL-15910, Design and Evaluation Guidelines for DOE Facilities Subjected to Natural Phenomena Hazards [2], which is to be used as the basis for the design and evaluation of new and existing facilities to natural phenomena loading. Rather than use the historical deterministic methods for computing structural and component loading from potential natural phenomena, UCRL-15910 incorporated the years of hazards studies conducted throughout the US Department of Energy complex into probabilistic-based methods. This paper describes the process used to incorporate US Department of Energy natural phenomena design guidelines into the Hanford Plant Standards -- Standard Design Criteria for Architectural and Civil Standards [3]. It also addresses the subsequent use of these criteria during structural assessments of facilities, systems, and components of various vintage in support of updating safety analysis reports. The paper includes comparison of results using these most recent probabilistic-based natural phenomena loading criteria to those obtained from previous assessments, and it addresses the lessons learned from the many structural evaluations of 1940--1960 vintage buildings

St. Louis FUSRAP Lessons Learned

International Nuclear Information System (INIS)

Eberlin, J.; Williams, D.; Mueller, D.

2003-01-01

The purpose of this paper is to present lessons learned from fours years' experience conducting Remedial Investigation and Remedial Action activities at the St. Louis Downtown Site (SLDS) under the Formerly Utilized Sites Remedial Action Program (FUSRAP). Many FUSRAP sites are experiencing challenges conducting Remedial Actions within forecasted volume and budget estimates. The St. Louis FUSRAP lessons learned provide insight to options for cost effective remediation at FUSRAP sites. The lessons learned are focused on project planning (budget and schedule), investigation, design, and construction

Lessons learned from community-based approaches to sodium reduction.

Science.gov (United States)

Kane, Heather; Strazza, Karen; Losby, Jan L; Lane, Rashon; Mugavero, Kristy; Anater, Andrea S; Frost, Corey; Margolis, Marjorie; Hersey, James

2015-01-01

This article describes lessons from a Centers for Disease Control and Prevention initiative encompassing sodium reduction interventions in six communities. A multiple case study design was used. This evaluation examined data from programs implemented in six communities located in New York (Broome County, Schenectady County, and New York City); California (Los Angeles County and Shasta County); and Kansas (Shawnee County). Participants (n = 80) included program staff, program directors, state-level staff, and partners. Measures for this evaluation included challenges, facilitators, and lessons learned from implementing sodium reduction strategies. The project team conducted a document review of program materials and semistructured interviews 12 to 14 months after implementation. The team coded and analyzed data deductively and inductively. Five lessons for implementing community-based sodium reduction approaches emerged: (1) build relationships with partners to understand their concerns, (2) involve individuals knowledgeable about specific venues early, (3) incorporate sodium reduction efforts and messaging into broader nutrition efforts, (4) design the program to reduce sodium gradually to take into account consumer preferences and taste transitions, and (5) identify ways to address the cost of lower-sodium products. The experiences of the six communities may assist practitioners in planning community-based sodium reduction interventions. Addressing sodium reduction using a community-based approach can foster meaningful change in dietary sodium consumption.

Seismic-resistant design of nuclear power stations in Japan, earthquake country. Lessons learned from Chuetsu-oki earthquake

International Nuclear Information System (INIS)

Irikura, Kojiro

2008-01-01

The new assessment (back-check) of earthquake-proof safety was being conducted at Kashiwazaki-Kariwa Nuclear Power Plants, Tokyo Electric Co. in response to a request based on the guideline for reactor evaluation for seismic-resistant design code, revised in 2006, when the 2007 Chuetsu-oki Earthquake occurred and brought about an unexpectedly huge tremor in this area, although the magnitude of the earthquake was only 6.8 but the intensity of earthquake motion exceeded 2.5-fold more than supposed. This paper introduces how and why the guideline for seismic-resistant design of nuclear facilities was revised in 2006, the outline of the Chuetsu-oki Earthquake, and preliminary findings and lessons learned from the Earthquake. The paper specifically discusses on (1) how we may specify in advance geologic active faults as has been overlooked this time, (2) how we can make adequate models for seismic origin from which we can extract its characteristics, and (3) how the estimation of strong ground motion simulation may be possible for ground vibration level of a possibly overlooked fault. (S. Ohno)

Selected Lessons Learned through the ISS Design, Development, Assembly, and Operations: Applicability to International Cooperation for Standardization

Science.gov (United States)

Hirsch, David B.

2009-01-01

This slide presentation reviews selected lessons that were learned during the design, development, assembly and operation of the International Space Station. The critical importance of standards and common interfaces is emphasized to create a common operation environment that can lead to flexibility and adaptability.

Lessons learned from EU stress tests evaluations with regard to external hazards

International Nuclear Information System (INIS)

Misak, J.

2014-01-01

The presentation was oriented to critical review of the lessons learned from the European Union (EU) Stress Test focusing on NPP robustness against external hazards. These lessons addressed: - organization of the stress tests, - scope and objectives of the stress tests, - peer review findings, recommendations and implications on the design in the area of external hazards, - further studies recommended in the area of external hazards and PSA, - relevant research areas identified by the SNETP Task Group in response to Fukushima accident. Some important conclusions were made in the final part of the presentation: - Vulnerability to the Fukushima Dai-ichi reactor accidents caused by external hazards and including their secondary effects was underestimated, - Lessons learned from Fukushima Dai-ichi reactor accidents, from the EU Stress Test and from peer reviews are to be reflected in safety improvements of operating plants and considered in new designs, - while no completely new phenomena were revealed from the Fukushima Dai-ichi reactor accidents, improvements in specific research areas (including external hazards and use of PSA) should be considered with high priority

Development of short Indonesian lesson plan to improve teacher performance

Science.gov (United States)

Yulianto, B.; Kamidjan; Ahmadi, A.; Asteria, P. V.

2018-01-01

The developmental research was motivated by the results of preliminary study through interviews, which revealed almost all of the teachers did not create lesson plan themselves. As a result of this load, the performance of the real learning in the classroom becomes inadequate. Moreover, when lesson plan was not made by teachers themselves, the learning process becomes ineffective. Therefore, this study designed to develop a prototype of the short lesson plan, in particular, Indonesian language teaching, and to investigate its effectiveness. The participants in the study were teachers who were trained through lesson study group to design short model’s lesson plan. Questionnaires and open-ended questions were used, and the quantitative and qualitative data obtained were analyzed accordingly. The analysis of the quantitative data, aided with SPSS, were frequency, percentage, and means, whereas the qualitative data were analyzed descriptively. The results showed that the teachers liked the model, and they were willing to design their own lesson plan. The observation data revealed that the classroom learning process became more interactive, and classroom atmosphere was more engaging and natural because the teachers did not stick to the lesson plan made by other teachers.

Supporting teachers' technology integration in lesson plans

NARCIS (Netherlands)

Janssen, Noortje

2017-01-01

Lesson planning offers rich opportunities for teachers to consider and implement technology in the classroom. This dissertation investigated the design and effectiveness of supplementary information to assist pre-service teachers during the lesson planning process. Based on the Technological,

Phagocytosis: history's lessons.

Science.gov (United States)

Garg, Manish; Chandawarkar, Rajiv Y

2013-01-01

The assimilation of lessons from the past is an essential component of education for scientists of tomorrow. These lessons are not easy to find. History books on science are few and usually highly dramatized and biographies of scientists tend to exaggerate the pomp of scientific discovery. Both underplay the hard and laborious work that is integral to any scientific pursuit. Here we illustrate one such example. A century ago, the Nobel Prize in Medicine was awarded to two scientists: Ilya Metchnikoff, a Russian zoologist, for the discovery ofphagocytosis-a cell-mediated ingestion ofmicrobes; and Paul Ehrlich, a distinguished physician-scientist, for discovering a highly antigen-specific serum-derived antibody-based immune defense. These two diametrically opposing views of the host-pathogen interaction set the stage for a strife that led to seminal advancements in immunology. Mirrored in this journey are important lessons for scientists today--ubiquitously as applicable to modern scientific life as they were a century ago. This commentaryhighlights these lessons--a fitting centenary to a well-deserved recognition.

English language-in-education: A lesson planning model for subject ...

African Journals Online (AJOL)

English language-in-education: A lesson planning model for subject teachers. ... lack of critical academic language skills in English as the Language of Learning and ... process of lesson design and the 'forward' process of lesson presentation.

Keiko, Killer Whale. [Lesson Plan].

Science.gov (United States)

Discovery Communications, Inc., Bethesda, MD.

This lesson plan presents activities designed to help students understand that Keiko, the killer whale, lived for a long time in an aquarium and had to be taught to live independently; and that computer users can get updates on how Keiko is doing. The main activity of the lesson involves middle school students working in small groups to produce a…

Inductive & Deductive Science Thinking: A Model for Lesson Development

Science.gov (United States)

Bilica, Kim; Flores, Margaret

2009-01-01

Middle school students make great learning gains when they participate in lessons that invite them to practice their developing scientific reasoning skills; however, designing developmentally appropriate, clear, and structured lessons about scientific thinking and reasoning can be difficult. This challenge can be met through lessons that teach…

Design, Implementation, and Lessons Learned from a Digital Storytelling Project in an Undergraduate Health Promotion Theory Course

Science.gov (United States)

Rimando, Marylen; Smalley, K. Bryant; Warren, Jacob C.

2015-01-01

This article describes the design, implementation and lessons learned from a digital storytelling project in a health promotion theory course. From 2011-2012, 195 health promotion majors completed a digital storytelling project at a Midwestern university. The instructor observed students' understanding of theories and models. This article adds to…

Forum on specification and Design Languages

CERN Document Server

Maehne, Torsten

2015-01-01

This book brings together a selection of the best papers from the sixteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2013 in Paris, France. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. • Covers applications of formal methods for specification, verification and debug; • Includes embedded analog and mixed-signal system design; • Enables model-driven engineering for embedded systems design and development.

The individual teacher in lesson study collaboration

DEFF Research Database (Denmark)

Skott, Charlotte Krog; Møller, Hanne

2017-01-01

used in lesson study research. Design/methodology/approach The authors use collective case studies. By being participant observers the authors provide detailed descriptions of two selected teachers’ lived experiences of lesson study collaboration. In addition to gain first-hand insights, the authors...... in the participation of each of the two teachers during a two-year lesson study project. By comparing these shifts the authors identify significant conditions for their individual learning. Research limitations/implications Although the study is small scale, both the insights into the different ways in which teachers...... participated and the theoretical insights might be valuable for other lesson study research approaches. Practical implications This paper provides valuable insights into conditions that might influence teachers’ participation in lesson study activities, especially in cultures with little experience of lesson...

Design Specifications for Adaptive Real-Time Systems

Science.gov (United States)

1991-12-01

TICfl \\ E CT E Design Specifications for JAN’\\ 1992 Adaptive Real - Time Systems fl Randall W. Lichota U, Alice H. Muntz - December 1991 \\ \\\\/ 0 / r...268-2056 Technical Report CMU/SEI-91-TR-20 ESD-91-TR-20 December 1991 Design Specifications for Adaptive Real - Time Systems Randall W. Lichota Hughes...Design Specifications for Adaptive Real - Time Systems Abstract: The design specification method described in this report treats a software

A Qualitative Study on Primary School Mathematics Lesson Evaluation

Science.gov (United States)

Zhao, Dongchen; Ma, Yunpeng

2009-01-01

Through the qualitative interviews of five implementers of primary school mathematics curriculum, this study addresses the ways in which mathematics lessons are evaluated. Results show that each evaluator recognizes different aspects of a "good lesson," however, among all criteria, the design of the lesson plan, realization of the lesson…

Towards a theory of product design specifications

DEFF Research Database (Denmark)

Hansen, Claus Thorp; Andreasen, Mogens Myrup

2004-01-01

, which express the customers¿ need and perception of value. In this paper we will scrutinize this assumption. We outline the roles and tasks of the product design specification in order to identify the requirements on a theory of product design specifications and we identify existing theory elements....... In the design methodology literature we find guidelines and methods to compile a product design specification. The contributions are based on the common underlying assumption that it is meaningful and the only feasible approach to interpret the result of a need analysis into a set of technical specifications...... to build such a theory of product design specifications upon....

Engaging design materials, formats and Framings in specific, situated co-designing

DEFF Research Database (Denmark)

Agger Eriksen, Mette

Engaging co-designers in specific situations of co- designing often also means engaging tangible working materials. However, it can be challenging, so rather than seeing it as applying design methods, the paper propose applying what I call a micro-material perspective. The practical concept captu......-design situations" clustered in three quite well- known types of co-design situations framed for; Exploring Current Use(r) Practices, Mapping Networks and Co-Designing (Possible) Futures.......Engaging co-designers in specific situations of co- designing often also means engaging tangible working materials. However, it can be challenging, so rather than seeing it as applying design methods, the paper propose applying what I call a micro-material perspective. The practical concept...... captures both paying attention to the physical design materials, the formats of their exploration and the framings of focus when understanding and planning such specific co-design situations. To exemplify applying the perspective, the paper describes and discusses six specific examples of "co...

Lessons from sexual and reproductive health voucher program design and function: a comprehensive review

Science.gov (United States)

2014-01-01

Background Developing countries face challenges in financing healthcare; often the poor do not receive the most basic services. The past decade has seen a sharp increase in the number of voucher programs, which target output-based subsidies for specific services to poor and underserved groups. The dearth of literature that examines lessons learned risks the wheel being endlessly reinvented. This paper examines commonalities and differences in voucher design and implementation, highlighting lessons learned for the design of new voucher programmes. Methodology The methodology comprised: discussion among key experts to develop inclusion/exclusion criteria; up-dating the literature database used by the DFID systematic review of voucher programs; and networking with key contacts to identify new programs and obtain additional program documents. We identified 40 programs for review and extracted a dataset of more than 120 program characteristics for detailed analysis. Results All programs aimed to increase utilisation of healthcare, particularly maternal health services, overwhelmingly among low-income populations. The majority contract(ed) private providers, or public and private providers, and all facilitate(d) access to services that are well defined, time-limited and reflect the country’s stated health priorities. All voucher programs incorporate a governing body, management agency, contracted providers and target population, and all share the same incentive structure: the transfer of subsidies from consumers to service providers, resulting in a strong effect on both consumer and provider behaviour. Vouchers deliver subsidies to individuals, who in the absence of the subsidy would likely not have sought care, and in all programs a positive behavioural response is observed, with providers investing voucher revenue to attract more clients. A large majority of programs studied used targeting mechanisms. Conclusions While many programs remain too small to address

Lessons from sexual and reproductive health voucher program design and function: a comprehensive review.

Science.gov (United States)

Grainger, Corinne; Gorter, Anna; Okal, Jerry; Bellows, Ben

2014-04-29

Developing countries face challenges in financing healthcare; often the poor do not receive the most basic services. The past decade has seen a sharp increase in the number of voucher programs, which target output-based subsidies for specific services to poor and underserved groups. The dearth of literature that examines lessons learned risks the wheel being endlessly reinvented. This paper examines commonalities and differences in voucher design and implementation, highlighting lessons learned for the design of new voucher programmes. The methodology comprised: discussion among key experts to develop inclusion/exclusion criteria; up-dating the literature database used by the DFID systematic review of voucher programs; and networking with key contacts to identify new programs and obtain additional program documents. We identified 40 programs for review and extracted a dataset of more than 120 program characteristics for detailed analysis. All programs aimed to increase utilisation of healthcare, particularly maternal health services, overwhelmingly among low-income populations. The majority contract(ed) private providers, or public and private providers, and all facilitate(d) access to services that are well defined, time-limited and reflect the country's stated health priorities. All voucher programs incorporate a governing body, management agency, contracted providers and target population, and all share the same incentive structure: the transfer of subsidies from consumers to service providers, resulting in a strong effect on both consumer and provider behaviour. Vouchers deliver subsidies to individuals, who in the absence of the subsidy would likely not have sought care, and in all programs a positive behavioural response is observed, with providers investing voucher revenue to attract more clients. A large majority of programs studied used targeting mechanisms. While many programs remain too small to address national-level need among the poor, large programs

Design Evolution of the Wide Field Infrared Survey Telescope Using Astrophysics Focused Telescope Assets (WFIRST-AFTA) and Lessons Learned

Science.gov (United States)

Peabody, Hume L.; Peters, Carlton V.; Rodriguez-Ruiz, Juan E.; McDonald, Carson S.; Content, David A.; Jackson, Clifton E.

2015-01-01

The design of the Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA) continues to evolve as each design cycle is analyzed. In 2012, two Hubble sized (2.4 m diameter) telescopes were donated to NASA from elsewhere in the Federal Government. NASA began investigating potential uses for these telescopes and identified WFIRST as a mission to benefit from these assets. With an updated, deeper, and sharper field of view than previous design iterations with a smaller telescope, the optical designs of the WFIRST instruments were updated and the mechanical and thermal designs evolved around the new optical layout. Beginning with Design Cycle 3, significant analysis efforts yielded a design and model that could be evaluated for Structural-Thermal-Optical-Performance (STOP) purposes for the Wide Field Imager (WFI) and provided the basis for evaluating the high level observatory requirements. Development of the Cycle 3 thermal model provided some valuable analysis lessons learned and established best practices for future design cycles. However, the Cycle 3 design did include some major liens and evolving requirements which were addressed in the Cycle 4 Design. Some of the design changes are driven by requirements changes, while others are optimizations or solutions to liens from previous cycles. Again in Cycle 4, STOP analysis was performed and further insights into the overall design were gained leading to the Cycle 5 design effort currently underway. This paper seeks to capture the thermal design evolution, with focus on major design drivers, key decisions and their rationale, and lessons learned as the design evolved.

The Correction of Myopia Evaluation Trial: lessons from the study design.

Science.gov (United States)

Hyman, L; Gwiazda, J

2004-01-01

The Correction of Myopia Evaluation Trial (COMET), a multicentre clinical trial based in 4 schools of optometry in the United States, evaluated the effect of progressive addition lenses versus single vision lenses on myopia progression in an ethnically diverse group of 469 myopic children aged 6 to 11 years. Completion of the clinical trial phase of the study provides an opportunity to evaluate aspects of the study design that contribute to its success. This article describes aspects of the study design that were influential in ensuring the smooth conduct of COMET. These include a dedicated team of investigators, an organisational structure with strong leadership and an independent Co-ordinating Centre, regular communication among investigators, flexible and creative approaches to recruitment and retention, sensitivity to concerns for child safety and child participation, and methods for enhancing and monitoring data reliability. The experience with COMET has provided a number of valuable lessons for all aspects of the study design that should benefit the development and implementation of future clinical trials, particularly those done in similar populations of children. The use of a carefully designed protocol using standard methods by dedicated members of the study team is essential in ensuring achievement of the study aims.

Research Data Curation Pilots: Lessons Learned

Directory of Open Access Journals (Sweden)

David Minor

2014-07-01

Full Text Available In the spring of 2011, the UC San Diego Research Cyberinfrastructure (RCI Implementation Team invited researchers and research teams to participate in a research curation and data management pilot program. This invitation took the form of a campus-wide solicitation. More than two dozen applications were received and, after due deliberation, the RCI Oversight Committee selected five curation-intensive projects. These projects were chosen based on a number of criteria, including how they represented campus research, varieties of topics, researcher engagement, and the various services required. The pilot process began in September 2011, and will be completed in early 2014. Extensive lessons learned from the pilots are being compiled and are being used in the on-going design and implementation of the permanent Research Data Curation Program in the UC San Diego Library. In this paper, we present specific implementation details of these various services, as well as lessons learned. The program focused on many aspects of contemporary scholarship, including data creation and storage, description and metadata creation, citation and publication, and long term preservation and access. Based on the lessons learned in our processes, the Research Data Curation Program will provide a suite of services from which campus users can pick and choose, as necessary. The program will provide support for the data management requirements from national funding agencies.

Alternative routes for highway shipments of radioactive materials and lessons learned from state designations

International Nuclear Information System (INIS)

1990-07-01

Pursuant to the Hazardous Materials Transportation Act (HMTA), the Department of Transportation (DOT) has promulgated a comprehensive set of regulations regarding the highway transportation of high-level radioactive materials. These regulations, under docket numbers HM-164 and HM-164A, establish interstate highways as the preferred routes for the transportation of radioactive materials within and through the states. The regulations also provide a methodology by which a state may select altemative routes. First, the state must establish a ''state routing agency'', defined as an entity authorized to use the state legal process to impose routing requirements on carriers of radioactive material (49 CFR 171.8). Once identified, the state routing agency must select routes in accordance with DOTs Guidelines for Selecting Preferred Highway Routes for Large Quantity Shipments of Radioactive Materials or an equivalent routing analysis. Adjoining states and localities should be consulted on the impact of proposed alternative routes as a prerequisite of final route selection. Lastly, the states must provide written notice to DOT of any alternative route designation before the routes are deemed effective. The purpose of this report is to discuss the ''lessons learned'' by the five states within the southern region that have designated alternative or preferred routes under the regulations of the Department of Transportation (DOT) established for the transportation of radioactive materials. The document was prepared by reviewing applicable federal laws and regulations, examining state reports and documents and contacting state officials and routing agencies involved in making routing decisions. In undertaking this project, the Southern States Energy Board hopes to reveal the process used by states that have designated alternative routes and thereby share their experiences (i.e., lessons learned) with other southern states that have yet to make designations

Guiding the Design of Lessons by Using the MAPLET Framework: Matching Aims, Processes, Learner Expertise and Technologies

Science.gov (United States)

Ifenthaler, Dirk; Gosper, Maree

2014-01-01

This paper introduces the MAPLET framework that was developed to map and link teaching aims, learning processes, learner expertise and technologies. An experimental study with 65 participants is reported to test the effectiveness of the framework as a guide to the design of lessons embedded within larger units of study. The findings indicate the…

Implementing US Department of Energy lessons learned programs. Volume 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The DOE Lessons Learned Handbook is a two-volume publication developed to supplement the DOE Lessons Learned Standard (DOE-STD-7501-95) with information that will organizations in developing or improving their lessons learned programs. Volume 1 includes greater detail than the Standard in areas such as identification and documentation of lessons learned; it also contains sections on specific processes such as training and performance measurement. Volume 2 (this document) contains examples of program documents developed by existing lessons learned programs as well as communications material, functional categories, transmittal documents, sources of professional and industry lessons learned, and frequently asked questions about the Lessons Learned List Service.

Lessons learned from the design of chemical space networks and opportunities for new applications

Science.gov (United States)

Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M.; Bajorath, Jürgen

2016-03-01

The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer- Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

Lessons learned from the design of chemical space networks and opportunities for new applications.

Science.gov (United States)

Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M; Bajorath, Jürgen

2016-03-01

The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer-Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

Plant Identification Characteristics for Deciduous Trees & Shrubs. Lesson Plans.

Science.gov (United States)

Burkholder, Kathy

This manual contains a group of lesson plans designed for use with a slide series (not included here). Its purpose is to introduce students to the basic concepts and terminology used in the identification of deciduous trees and shrubs. The manual is composed of 12 lesson plans. The first lesson is an introduction to plant identification. The…

MDEP Design-Specific Common Position CP-APR1400WG-01. Common position addressing Fukushima Daiichi nuclear power plant accident

International Nuclear Information System (INIS)

2016-05-01

The MDEP APR1400 Working Group (APR1400WG) members consist of members from Republic of Korea, United Arab Emirates, and the United States. A main objectives of MDEP is to encourage convergence of code, standard and safety goals with exploring the opportunities for harmonization of regulatory practice and cooperation on safety review of APR-1400 specific designs. This common position addressing is aimed at sharing knowledge, information and experience on safety improvement related to lessons learned from the Fukushima Daiichi NPP Accident or Fukushima Daiichi NPP Accident-related issues amongst APR-1400 WG member states to achieve the MEDP goal. Because not all of these Regulators have completed the regulatory review of their APR1400 applications yet, this paper identifies common preliminary approaches to address potential safety improvements for APR1400 plants, as well as common general expectations for new nuclear power plants, as related to lessons learned from the Fukushima Daiichi NPP Accident or Fukushima Daiichi NPP Accident-related issues. While some asymmetry exists among those of three Regulators in terms of design, regulatory practice and licensing milestone sharing information and common understanding on post-Fukushima Daiichi NPP Accident enhancement would be promote resilient design for countering beyond design extreme external event like Fukushima Daiichi NPP nuclear disaster. This common position paper aims at identifying characteristics of post-Fukushima Daiichi NPP Accident enhancements putting in place by each country and setting common position to achieve balanced and harmonized APR-1400 design. After the safety reviews of the APR1400 design applications that are currently in review are completed, the regulators will update this paper to reflect their safety conclusions regarding the APR1400 design and how the design could be enhanced to address Fukushima Daiichi NPP Accident-related issues. The common preliminary approaches are organised into

Engineered waste-package-system design specification

International Nuclear Information System (INIS)

1983-05-01

This report documents the waste package performance requirements and geologic and waste form data bases used in developing the conceptual designs for waste packages for salt, tuff, and basalt geologies. The data base reflects the latest geotechnical information on the geologic media of interest. The parameters or characteristics specified primarily cover spent fuel, defense high-level waste, and commercial high-level waste forms. The specification documents the direction taken during the conceptual design activity. A separate design specification will be developed prior to the start of the preliminary design activity

Food Design Thinking: A Branch of Design Thinking Specific to Food Design

Science.gov (United States)

Zampollo, Francesca; Peacock, Matthew

2016-01-01

Is there a need for a set of methods within Design Thinking tailored specifically for the Food Design process? Is there a need for a branch of Design Thinking dedicated to Food Design alone? Chefs are not generally trained in Design or Design Thinking, and we are only just beginning to understand how they ideate and what recourses are available to…

Comparison of plant-specific probabilistic safety assessments and lessons learned

International Nuclear Information System (INIS)

Balfanz, H.P.; Berg, H.P.; Steininger, U.

2001-01-01

Probabilistic safety assessments (PSA) have been performed for all German nuclear power plants in operation. These assessments are mainly based on the recent German PSA guide and an earlier draft, respectively. However, comparison of these PSA show differences in the results which are discussed in this paper. Lessons learned from this comparison and further development of the PSA methodology are described. (orig.) [de

Summary of Planned Implementation for the HTGR Lessons Learned Applicable to the NGNP

International Nuclear Information System (INIS)

Mckirdy, Ian

2011-01-01

This document presents a reconciliation of the lessons learned during a 2010 comprehensive evaluation of pertinent lessons learned from past and present high temperature gas-cooled reactors that apply to the Next Generation Nuclear Plant Project along with current and planned activities. The data used are from the latest Idaho National Laboratory research and development plans, the conceptual design report from General Atomics, and the pebble bed reactor technology readiness study from AREVA. Only those lessons related to the structures, systems, and components of the Next Generation Nuclear Plant (NGNP), as documented in the recently updated lessons learned report are addressed. These reconciliations are ordered according to plant area, followed by the affected system, subsystem, or component; lesson learned; and finally an NGNP implementation statement. This report (1) provides cross references to the original lessons learned document, (2) describes the lesson learned, (3) provides the current NGNP implementation status with design data needs associated with the lesson learned, (4) identifies the research and development being performed related to the lesson learned, and (5) summarizes with a status of how the lesson learned has been addressed by the NGNP Project.

Lessons Learned From a Decade of Design, Construction, and Operations of the Environmental Management Waste Management Facility in Oak Ridge, Tennessee - 12062

Energy Technology Data Exchange (ETDEWEB)

Williams, Joe [Bechtel National, Inc., Oak Ridge, TN 37830 (United States)

2012-07-01

The Environmental Management Waste Management Facility (EMWMF) is the Department of Energy's on-site disposal facility for radioactive and hazardous waste generated by the CERCLA cleanup of the Oak Ridge Reservation (ORR). EMWMF recently completed building out to its maximum site capacity and is approaching a decade of operating experience. In meeting the challenges of design, construction, and operation of a mixed waste and low-level radioactive waste disposal facility within the framework of CERCLA, the Bechtel Jacobs Company LLC (BJC) project team learned valuable lessons that may be beneficial to other disposal facilities. Since project inception in 1998, the scope of the effort includes five regulator-approved designs, four phases of construction, and utilization of half of EMWMF's 1.63 M m{sup 3} of airspace during disposal of waste streams from across the ORR. Funding came from the broadest possible range of sources - privatization, American Recovery and Reinvestment Act, and two funding appropriation accounts. In the process of becoming the cost effective disposal outlet for the majority of the ORR cleanup waste, EMWMF overcame numerous challenges. Lessons learned were a key factor in achieving that success. Many of EMWMF's challenges are common to other disposal facilities. Sharing the successes and lessons learned will help other facilities optimize design, construction, and operations. (author)

Task-Specific Training and Job Design

OpenAIRE

Felipe Balmaceda

2006-01-01

This paper provides a simple theoretical framework based on a new type of human capital introduced by Gibbons and Waldman (2004), called task-specific training, to understand job design. Mainly, in the presence of task-specific training, promotions might result ex-post in the underutilization of human capital and thus firms at the time of designing jobs should attempt to diversify this risk.

Lessons Learned from the Crew Health Care System (CHeCS) Rack 1 Environmental Control and Life Support (ECLS) Design

Science.gov (United States)

Williams, David E.

2006-01-01

This paper will provide an overview of the International Space Station (ISS) Environmental Control and Life Support (ECLS) design of the Crew Health Care System (CHeCS) Rack 1 and it will document some of the lessons that have been learned to date for the ECLS equipment in this rack.

Solar adaptive optics: specificities, lessons learned, and open alternatives

Science.gov (United States)

Montilla, I.; Marino, J.; Asensio Ramos, A.; Collados, M.; Montoya, L.; Tallon, M.

2016-07-01

First on sky adaptive optics experiments were performed on the Dunn Solar Telescope on 1979, with a shearing interferometer and limited success. Those early solar adaptive optics efforts forced to custom-develop many components, such as Deformable Mirrors and WaveFront Sensors, which were not available at that time. Later on, the development of the correlation Shack-Hartmann marked a breakthrough in solar adaptive optics. Since then, successful Single Conjugate Adaptive Optics instruments have been developed for many solar telescopes, i.e. the National Solar Observatory, the Vacuum Tower Telescope and the Swedish Solar Telescope. Success with the Multi Conjugate Adaptive Optics systems for GREGOR and the New Solar Telescope has proved to be more difficult to attain. Such systems have a complexity not only related to the number of degrees of freedom, but also related to the specificities of the Sun, used as reference, and the sensing method. The wavefront sensing is performed using correlations on images with a field of view of 10", averaging wavefront information from different sky directions, affecting the sensing and sampling of high altitude turbulence. Also due to the low elevation at which solar observations are performed we have to include generalized fitting error and anisoplanatism, as described by Ragazzoni and Rigaut, as non-negligible error sources in the Multi Conjugate Adaptive Optics error budget. For the development of the next generation Multi Conjugate Adaptive Optics systems for the Daniel K. Inouye Solar Telescope and the European Solar Telescope we still need to study and understand these issues, to predict realistically the quality of the achievable reconstruction. To improve their designs other open issues have to be assessed, i.e. possible alternative sensing methods to avoid the intrinsic anisoplanatism of the wide field correlation Shack-Hartmann, new parameters to estimate the performance of an adaptive optics solar system, alternatives to

Moroccan Arabic Technical Lessons for Rehab./Special Ed.

Science.gov (United States)

Chtatou, Mohamed, Ed.

The instructional materials in Moroccan Arabic are designed to meet the language needs of Peace Corps volunteers working in rehabilitation and special education in Morocco. The lessons are almost entirely in Arabic, and include vocabulary lists with both technical and everyday language pertaining to disabilities. Lesson topics include singing, the…

PROMOTING ENGLISH TEACHERS’ PROFESSIONAL DEVELOPMENT (TPD THROUGH THE PRACTICE OF LESSON STUDY

Directory of Open Access Journals (Sweden)

Yanuarti Apsari

2017-12-01

Full Text Available This paper sheds some lights on the practice of lesson study conducted in higher education level in relations to teacher professional development. This study employed an explorative research design which involved a team of three English teachers of STKIP Siliwangi and one class of English Department. The team was involved in jointly designing, teaching, researching, refining a research lesson. The research was conducted in three cycles, in which each cycle was evaluated. The data were collected through two instruments: classroom observation and teachers’ reflective notes. The result revealed that the practice of lesson study can create multiple pathways for teaching improvement, especially in terms of collaborative activities done by teachers involved in the lesson study team. The result also revealed that the practice of lesson study the practice of lesson study can improve not only students’ academic skills, but also students’ social skills.

Designing an Earthquake-Proof Art Museum: An Arts- and Engineering-Integrated Science Lesson

Science.gov (United States)

Carignan, Anastasia; Hussain, Mahjabeen

2016-01-01

In this practical arts-integrated science and engineering lesson, an inquiry-based approach was adopted to teach a class of fourth graders in a Midwest elementary school about the scientific concepts of plate tectonics and earthquakes. Lessons were prepared following the 5 E instructional model. Next Generation Science Standards (4-ESS3-2) and the…

Feed-in Tariffs: Good Practices and Design Considerations

Energy Technology Data Exchange (ETDEWEB)

Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Esterly, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-01-02

In recent years, feed-in tariff (FIT) activity has focused primarily on revisions to current policies, underscoring the need for stable and predictable, yet flexible, policy environments. This policy brief provides a primer on key FIT design elements, lessons from country experience, and support resources to enable more detailed and country-specific FIT policy design.

Considerations on Fail Safe Design for Design Basis Accident (DBA) vs. Design Extension Condition (DEC): Lesson Learnt from the Fukushima Accident

International Nuclear Information System (INIS)

Ha, Jun Su; Kim, Sungyeop

2014-01-01

The fail safety design is referred to as an inherently safe design concept where the failure of an SSC (System, Structure or Component) leads directly to a safe condition. Usually the fail safe design has been devised based on the design basis accident (DBAs), because the nuclear safety has been assured by securing the capability to safely cope with DBAs. Currently regards have been paid to the DEC (Design Extension Condition) as an extended design consideration. Hence additional attention should be paid to the concept of the fail safe design in order to consider the DEC, accordingly. In this study, a case chosen from the Fukushima accident is studied to discuss the issue associated with the fail safe design in terms of DBA and DEC standpoints. For the fail safe design to be based both on the DBA and the DEC, a Mode Changeable Fail Safe Design (MCFSD) is proposed in this study. Additional discussions on what is needed for the MCFSD to be applied in the nuclear safety are addressed as well. One of the lessons learnt from the Fukushima accident should include considerations on the fail-safe design in a changing regulatory framework. Currently the design extension condition (DEC) including severe accidents should be considered during designing and licensing NPPs. Hence concepts on the fail safe design need to be changed to be based on not only the DBA but also the DEC. In this study, a case on a fail-safe design chosen from the Fukushima accident is studied to discuss the issue associated with the fail safe design in terms of DBA and DEC conditions. For the fail safe design to be based both on the DBA and the DEC, a Mode Changeable Fail Safe Design (MCFSD) is proposed in this study. Additional discussions on what is needed for the MCFSD to be applied in the nuclear safety are addressed as well

Higher Education ERP: Lessons Learned.

Science.gov (United States)

Swartz, Dave; Orgill, Ken

2001-01-01

Shares experiences and lessons learned by chief information officers of large universities about enterprise resource planning (ERP). Specifically, provides a framework for approaching an ERP that could save universities millions of dollars. (EV)

Satellite-instrument system engineering best practices and lessons

Science.gov (United States)

Schueler, Carl F.

2009-08-01

This paper focuses on system engineering development issues driving satellite remote sensing instrumentation cost and schedule. A key best practice is early assessment of mission and instrumentation requirements priorities driving performance trades among major instrumentation measurements: Radiometry, spatial field of view and image quality, and spectral performance. Key lessons include attention to technology availability and applicability to prioritized requirements, care in applying heritage, approaching fixed-price and cost-plus contracts with appropriate attention to risk, and assessing design options with attention to customer preference as well as design performance, and development cost and schedule. A key element of success either in contract competition or execution is team experience. Perhaps the most crucial aspect of success, however, is thorough requirements analysis and flowdown to specifications driving design performance with sufficient parameter margin to allow for mistakes or oversights - the province of system engineering from design inception to development, test and delivery.

Recycling Lesson Plan

Science.gov (United States)

Okaz, Abeer Ali

2013-01-01

This lesson plan designed for grade 2 students has the goal of teaching students about the environmental practice of recycling. Children will learn language words related to recycling such as: "we can recycle"/"we can't recycle" and how to avoid littering with such words as: "recycle paper" and/or "don't throw…

Integrating Patient-Reported Outcomes into Spine Surgical Care through Visual Dashboards: Lessons Learned from Human-Centered Design

Science.gov (United States)

Hartzler, Andrea L.; Chaudhuri, Shomir; Fey, Brett C.; Flum, David R.; Lavallee, Danielle

2015-01-01

Introduction: The collection of patient-reported outcomes (PROs) draws attention to issues of importance to patients—physical function and quality of life. The integration of PRO data into clinical decisions and discussions with patients requires thoughtful design of user-friendly interfaces that consider user experience and present data in personalized ways to enhance patient care. Whereas most prior work on PROs focuses on capturing data from patients, little research details how to design effective user interfaces that facilitate use of this data in clinical practice. We share lessons learned from engaging health care professionals to inform design of visual dashboards, an emerging type of health information technology (HIT). Methods: We employed human-centered design (HCD) methods to create visual displays of PROs to support patient care and quality improvement. HCD aims to optimize the design of interactive systems through iterative input from representative users who are likely to use the system in the future. Through three major steps, we engaged health care professionals in targeted, iterative design activities to inform the development of a PRO Dashboard that visually displays patient-reported pain and disability outcomes following spine surgery. Findings: Design activities to engage health care administrators, providers, and staff guided our work from design concept to specifications for dashboard implementation. Stakeholder feedback from these health care professionals shaped user interface design features, including predefined overviews that illustrate at-a-glance trends and quarterly snapshots, granular data filters that enable users to dive into detailed PRO analytics, and user-defined views to share and reuse. Feedback also revealed important considerations for quality indicators and privacy-preserving sharing and use of PROs. Conclusion: Our work illustrates a range of engagement methods guided by human-centered principles and design

Integrating Patient-Reported Outcomes into Spine Surgical Care through Visual Dashboards: Lessons Learned from Human-Centered Design.

Science.gov (United States)

Hartzler, Andrea L; Chaudhuri, Shomir; Fey, Brett C; Flum, David R; Lavallee, Danielle

2015-01-01

The collection of patient-reported outcomes (PROs) draws attention to issues of importance to patients-physical function and quality of life. The integration of PRO data into clinical decisions and discussions with patients requires thoughtful design of user-friendly interfaces that consider user experience and present data in personalized ways to enhance patient care. Whereas most prior work on PROs focuses on capturing data from patients, little research details how to design effective user interfaces that facilitate use of this data in clinical practice. We share lessons learned from engaging health care professionals to inform design of visual dashboards, an emerging type of health information technology (HIT). We employed human-centered design (HCD) methods to create visual displays of PROs to support patient care and quality improvement. HCD aims to optimize the design of interactive systems through iterative input from representative users who are likely to use the system in the future. Through three major steps, we engaged health care professionals in targeted, iterative design activities to inform the development of a PRO Dashboard that visually displays patient-reported pain and disability outcomes following spine surgery. Design activities to engage health care administrators, providers, and staff guided our work from design concept to specifications for dashboard implementation. Stakeholder feedback from these health care professionals shaped user interface design features, including predefined overviews that illustrate at-a-glance trends and quarterly snapshots, granular data filters that enable users to dive into detailed PRO analytics, and user-defined views to share and reuse. Feedback also revealed important considerations for quality indicators and privacy-preserving sharing and use of PROs. Our work illustrates a range of engagement methods guided by human-centered principles and design recommendations for optimizing PRO Dashboards for patient

The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

Science.gov (United States)

Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

2016-01-01

This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

Renewable Electricity Standards: Good Practices and Design Considerations

Energy Technology Data Exchange (ETDEWEB)

Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Esterly, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-01-02

In widespread use globally, renewable electricity standards (RES) are one of the most widely adopted renewable energy policies and a critical regulatory vehicle to accelerate renewable energy deployment. This policy brief provides an introduction to key RES design elements, lessons from country experience, and support resources to enable more detailed and country-specific RES policy design.

Developing Pre-Service Teachers' Technological Pedagogical Content Knowledge for Teaching Mathematics with the Geometer's Sketchpad through Lesson Study

Science.gov (United States)

Meng, Chew Cheng; Sam, Lim Chap

2013-01-01

The purpose of this study was to develop pre-service secondary teachers' technological pedagogical content knowledge (TPACK) for teaching mathematics with The Geometer's Sketchpad (GSP) through Lesson Study (LS). Specifically, a single-group pretest-posttest design was employed to examine whether there was a significant difference in the…

lessons from tuberous sclerosis complex

African Journals Online (AJOL)

intellectual disability, autism, specific learning disorders) and mental health disorders (e.g. depression, psychosis and anxiety disorders). The first lesson, therefore, is ... of an adolescent with TSC, facial angiofibromas and a presumed fat-poor ...

Brentwood Lessons Learned Project Report

Energy Technology Data Exchange (ETDEWEB)

Rivkin, Carl H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Caton, Melanie C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ainscough, Christopher D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcinkoski, Jason [Dept. of Energy (DOE), Washington DC (United States)

2017-09-26

The purpose of this report is to document lessons learned in the installation of the hydrogen fueling station at the National Park Service Brentwood site in Washington, D.C., to help further the deployment of hydrogen infrastructure required to support hydrogen and other fuel cell technologies. Hydrogen fueling is the most difficult infrastructure component to build and permit. Hydrogen fueling can include augmenting hydrogen fueling capability to existing conventional fuel fueling stations as well as building brand new hydrogen fueling stations. This report was produced as part of the Brentwood Lessons Learned project. The project consisted of transplanting an existing modular hydrogen fueling station from Connecticut to the National Park Service Brentwood site. This relocation required design and construction at the Brentwood site to accommodate the existing station design as well as installation and validation of the updated station. One of the most important lessons learned was that simply moving an existing modular station to an operating site was not necessarily straight-forward - performing the relocation required significant effort and cost. The station has to function at the selected operating site and this functionality requires a power supply, building supports connecting to an existing alarm system, electrical grounding and lighting, providing nitrogen for purging, and providing deionized water if an electrolyzer is part of the station package. Most importantly, the station has to fit into the existing site both spatially and operationally and not disrupt existing operations at the site. All of this coordination and integration requires logistical planning and project management. The idea that a hydrogen fueling station can be simply dropped onto a site and made immediately operational is generally not realistic. Other important lessons learned include that delineating the boundaries of the multiple jurisdictions that have authority over a project for

High Temperature Gas-Cooled Reactors Lessons Learned Applicable to the Next Generation Nuclear Plant

Energy Technology Data Exchange (ETDEWEB)

J. M. Beck; L. F. Pincock

2011-04-01

The purpose of this report is to identify possible issues highlighted by these lessons learned that could apply to the NGNP in reducing technical risks commensurate with the current phase of design. Some of the lessons learned have been applied to the NGNP and documented in the Preconceptual Design Report. These are addressed in the background section of this document and include, for example, the decision to use TRISO fuel rather than BISO fuel used in the Peach Bottom reactor; the use of a reactor pressure vessel rather than prestressed concrete found in Fort St. Vrain; and the use of helium as a primary coolant rather than CO2. Other lessons learned, 68 in total, are documented in Sections 2 through 6 and will be applied, as appropriate, in advancing phases of design. The lessons learned are derived from both negative and positive outcomes from prior HTGR experiences. Lessons learned are grouped according to the plant, areas, systems, subsystems, and components defined in the NGNP Preconceptual Design Report, and subsequent NGNP project documents.

Designing for movement quality in exergames: lessons learned from observing senior citizens playing stepping games.

Science.gov (United States)

Skjæret, Nina; Nawaz, Ather; Ystmark, Kristine; Dahl, Yngve; Helbostad, Jorunn L; Svanæs, Dag; Vereijken, Beatrix

2015-01-01

Exergames are increasingly used as an exercise intervention to reduce fall risk in elderly. However, few exergames have been designed specifically for elderly, and we lack knowledge about the characteristics of the movements elicited by exergames and thereby about their potential to train functions important for fall risk reduction. This study investigates game elements and older players' movement characteristics during stepping exergames in order to inform exergame design for movement quality in the context of fall preventive exercise. Fourteen senior citizens (mean age 73 years ± 5.7, range 65 - 85) played 3 stepping exergames in a laboratory. Each of the exergames was described with respect to 7 game elements (physical space, sensing hardware technology, game graphics and sound, model of user, avatar/mapping of movements, game mechanism and game narrative). Five movement characteristics (weight shift; variation in step length, speed, and movement direction; visual independency) were scored on a 5-point Likert scale based on video observations of each player and each game. Disagreement between raters was resolved by agreement. Differences in scores for the 3 exergames were analyzed with a multivariate one-way ANOVA. The Mole received the highest sum score and the best score on each of the 5 movement characteristics (all p values independency (p < 0.03 and p < 0.0005, respectively), and lower than The Mole on speed variation (p < 0.05). The physical space players used when exergaming and the on-screen representation of the player, affected movement quality positively as indexed by multiple weight shifts and variation in stepping size, direction, and speed. Furthermore, players' movements improved when playing speed-affected game progression and when the game narrative was related to a natural context. Comparing differences in game elements with associated differences in game movement requirements provides valuable insights about how to design for movement quality

From inventivity in Limerick to creativity in Aveiro: lessons learnt

CSIR Research Space (South Africa)

Wong, W

2009-01-01

Full Text Available This paper describes the key lessons from an earlier HCI Educators’ conference, held in Limerick in 2006, the outcomes of which led to the theme of HCIEd 2007 – Creativity: Experiencing to Educate and Design. The paper discusses the lessons leant...

The Construction of Biology Lessons: A Meta-Paradigmatic Approach.

Science.gov (United States)

Sanchez, Jaime

1991-01-01

The views of Piaget, Ausubel, and Bruner have been used to present an integrated view of biology lesson construction and to assist teachers in the design and development of tools and strategies to improve their teaching. The structure of an integrated model for biology lesson construction and an example of a biolesson using the metaparadigmatic…

Deburring: technical capabilities and cost-effective approaches, Lessons 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Gillespie, L.K.

1980-06-01

This ten lesson text on deburring is designed to provide engineers and production supervisors with an overall understanding of deburring economics and current capabilities. The material included describes economics, side effects, process selection techniques, product design influences, standards, plantwide approaches, burr formation, and prevention. Deburring methods described include barrel, centrifugal barrel, vibratory, spindle, manual, electrochemical, electropolish, brush, abrasive jet, abrasive flow, water jet, thermal energy, and mechanized mechanical. Lessons 3 and 4 describe product design influences and burr prevention and minimization respectively.

Additive Manufacturing Design Considerations for Liquid Engine Components

Science.gov (United States)

Whitten, Dave; Hissam, Andy; Baker, Kevin; Rice, Darron

2014-01-01

The Marshall Space Flight Center's Propulsion Systems Department has gained significant experience in the last year designing, building, and testing liquid engine components using additive manufacturing. The department has developed valve, duct, turbo-machinery, and combustion device components using this technology. Many valuable lessons were learned during this process. These lessons will be the focus of this presentation. We will present criteria for selecting part candidates for additive manufacturing. Some part characteristics are 'tailor made' for this process. Selecting the right parts for the process is the first step to maximizing productivity gains. We will also present specific lessons we learned about feature geometry that can and cannot be produced using additive manufacturing machines. Most liquid engine components were made using a two-step process. The base part was made using additive manufacturing and then traditional machining processes were used to produce the final part. The presentation will describe design accommodations needed to make the base part and lessons we learned about which features could be built directly and which require the final machine process. Tolerance capabilities, surface finish, and material thickness allowances will also be covered. Additive Manufacturing can produce internal passages that cannot be made using traditional approaches. It can also eliminate a significant amount of manpower by reducing part count and leveraging model-based design and analysis techniques. Information will be shared about performance enhancements and design efficiencies we experienced for certain categories of engine parts.

Evaluating a Chronic Disease Management Improvement Collaboration: Lessons in Design and Implementation Fundamentals.

Science.gov (United States)

Phillips, Kaye; Amar, Claudia; Elicksen-Jensen, Keesa

2016-01-01

For the Canadian Foundation for Healthcare Improvement (CFHI), the Atlantic Healthcare Collaboration (AHC) was a pivotal opportunity to build upon its experience and expertise in delivering regional change management training and to apply and refine its evaluation and performance measurement approach. This paper reports on its evaluation principles and approach, as well as the lessons learned as CFHI diligently coordinated and worked with improvement project (IP) teams and a network of stakeholders to design and undertake a suite of evaluative activities. The evaluation generated evidence and learnings about various elements of chronic disease prevention and management (CDPM) improvement processes, individual and team capacity building and the role and value of CFHI in facilitating tailored learning activities and networking among teams, coaches and other AHC stakeholders.

Site-specific design optimization of wind turbines

DEFF Research Database (Denmark)

Fuglsang, P.; Bak, C.; Schepers, J.G.

2002-01-01

This article reports results from a European project, where site characteristics were incorporated into the design process of wind turbines, to enable site-specific design. Two wind turbines of different concept were investigated at six different sites comprising normal flat terrain, offshore...... and complex terrain wind farms. Design tools based on numerical optimization and aeroelastic calculations were combined with a cost model to allow optimization for minimum cost of energy. Different scenarios were optimized ranging from modifications of selected individual components to the complete design...... of a new wind turbine. Both annual energy yield and design-determining loads depended on site characteristics, and this represented a potential for site-specific design. The maximum variation in annual energy yield was 37% and the maximum variation in blade root fatigue loads was 62%. Optimized site...

Development of a Web-Based Health Care Intervention for Patients With Heart Disease: Lessons Learned From a Participatory Design Study.

Science.gov (United States)

Noergaard, Birgitte; Sandvei, Marianne; Rottmann, Nina; Johannessen, Helle; Wiil, Uffe; Schmidt, Thomas; Pedersen, Susanne S

2017-05-17

The use of telemedicine technologies in health care has increased substantially, together with a growing interest in participatory design methods when developing telemedicine approaches. We present lessons learned from a case study involving patients with heart disease and health care professionals in the development of a personalized Web-based health care intervention. We used a participatory design approach inspired by the method for feasibility studies in software development. We collected qualitative data using multiple methods in 3 workshops and analyzed the data using thematic analysis. Participants were 7 patients with diagnosis of heart disease, 2 nurses, 1 physician, 2 systems architects, 3 moderators, and 3 observers. We present findings in 2 parts. (1) Outcomes of the participatory design process: users gave valuable feedback on ease of use of the platforms' tracking tools, platform design, terminology, and insights into patients' monitoring needs, information and communication technologies skills, and preferences for self-management tools. (2) Experiences from the participatory design process: patients and health care professionals contributed different perspectives, with the patients using an experience-based approach and the health care professionals using a more attitude-based approach. The essential lessons learned concern planning and organization of workshops, including the finding that patients engaged actively and willingly in a participatory design process, whereas it was more challenging to include and engage health care professionals. ©Birgitte Noergaard, Marianne Sandvei, Nina Rottmann, Helle Johannessen, Uffe Wiil, Thomas Schmidt, Susanne S Pedersen. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 17.05.2017.

Involving Customer Relations in Contextual Design

DEFF Research Database (Denmark)

Simonsen, Jesper

1996-01-01

This paper presents a case study in the form of a contextual design project, the aim of which was to design a system for a particular organization. The starting point in the case was a need in the organization for a specific system. The case involved an analysis of the organizations customer...... point of the design project, how the project was conducted, and which results it ended up with. This is followed by a discussion of the effects of, and lessons learned by, involving customer relations in contextual design....

The learning teacher in a collaborative lesson study team within the context of mathematics

NARCIS (Netherlands)

Goei, Sui Lin; Verhoef, Neeltje Cornelia

2015-01-01

This paper summarises results of two studies on teachers’ learning when participating in a collaborative Lesson Study team within the context of mathematics teaching. In study one, Lesson Study was used in the classic way of preparing, designing, executing and reflecting on the research lesson.

Reporting intellectual capital in health care organizations: specifics, lessons learned, and future research perspectives.

Science.gov (United States)

Veltri, Stefania; Bronzetti, Giovanni; Sicoli, Graziella

2011-01-01

This article analyzes the concept of intellectual capital (IC) in the health sector sphere by studying the case of a major nonprofit research organization in this sector, which has for some time been publishing IC reports. In the last few years, health care organizations have been the object of great attention in the implementation and transfer of managerial models and tools; however, there is still a lack of attention paid to the strategic management of IC as a fundamental resource for supporting and enhancing performance improvement dynamics. The main aim of this article is to examine the IC reporting model used by the Center of Molecular Medicine (CMM), a Swedish health organization which is an outstanding benchmark in reporting its IC. We also consider the specifics of IC reporting for health organizations, the lessons learned by analyzing CMM's IC reporting, and future perspectives for research.

Lessons of nuclear robot history

International Nuclear Information System (INIS)

Oomichi, Takeo

2014-01-01

Severe accidents occurred at Fukushima Daiichi Nuclear Power Station stirred up people's great expectation of nuclear robot's deployment. However unexpected nuclear disaster, especially rupture of reactor building caused by core meltdown and hydrogen explosion, made it quite difficult to introduce nuclear robot under high radiation environment to cease accidents and dispose damaged reactor. Robotics Society of Japan (RSJ) set up committee to look back upon lessons learned from 50 year's past experience of nuclear robot development and summarized 'Lessons of nuclear robot history', which was shown on the home page website of RSJ. This article outlined it with personal comment. History of nuclear robot developed for inspection and maintenance at normal operation and for specific required response at nuclear accidents was reviewed with many examples at home and abroad for TMI, Chernobyl and JCO accidents. Present state of Fukushima accident response robot's introduction and development was also described with some comments on nuclear robot development from academia based on lessons. (T. Tanaka)

Lessons learned applying CASE methods/tools to Ada software development projects

Science.gov (United States)

Blumberg, Maurice H.; Randall, Richard L.

1993-01-01

This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

Multi-unit Operations in Non-Nuclear Systems: Lessons Learned for Small Modular Reactors

Energy Technology Data Exchange (ETDEWEB)

OHara J. M.; Higgins, J.; DAgostino, A.

2012-01-17

The nuclear-power community has reached the stage of proposing advanced reactor designs to support power generation for decades to come. Small modular reactors (SMRs) are one approach to meet these energy needs. While the power output of individual reactor modules is relatively small, they can be grouped to produce reactor sites with different outputs. Also, they can be designed to generate hydrogen, or to process heat. Many characteristics of SMRs are quite different from those of current plants and may be operated quite differently. One difference is that multiple units may be operated by a single crew (or a single operator) from one control room. The U.S. Nuclear Regulatory Commission (NRC) is examining the human factors engineering (HFE) aspects of SMRs to support licensing reviews. While we reviewed information on SMR designs to obtain information, the designs are not completed and all of the design and operational information is not yet available. Nor is there information on multi-unit operations as envisioned for SMRs available in operating experience. Thus, to gain a better understanding of multi-unit operations we sought the lesson learned from non-nuclear systems that have experience in multi-unit operations, specifically refineries, unmanned aerial vehicles and tele-intensive care units. In this paper we report the lessons learned from these systems and the implications for SMRs.

TMI-2 Lessons Learned Task Force status report and short-term recommendations

International Nuclear Information System (INIS)

1979-07-01

Review of the Three Mile Island accident by the TMI-2 Lessons Learned Task Force has disclosed a number of actions in the areas of design and analysis and plant operations that the Task Force recommends be required in the short term to provide substantial additional protection which is required for the public health and safety. All nuclear power plants in operation or in various stages of construction or licensing action are affected to varying degrees by the specific recommendations. The Task Force is continuing work in areas of general safety criteria, systems design requirements, nuclear power plant operations, and nuclear power plant licensing

Brothers Grimm. [Lesson Plan].

Science.gov (United States)

Discovery Communications, Inc., Bethesda, MD.

Based on Grimm's fairy tales, this lesson plan presents activities designed to help students understand that fairy tales connect them to earlier generations, help them think about present situations, that magic figures prominently in fairy tales, and that fairy tales can inspire readers to create original works of art. The main activity in the…

Design of multi-specificity in protein interfaces.

Directory of Open Access Journals (Sweden)

Elisabeth L Humphris

2007-08-01

Full Text Available Interactions in protein networks may place constraints on protein interface sequences to maintain correct and avoid unwanted interactions. Here we describe a "multi-constraint" protein design protocol to predict sequences optimized for multiple criteria, such as maintaining sets of interactions, and apply it to characterize the mechanism and extent to which 20 multi-specific proteins are constrained by binding to multiple partners. We find that multi-specific binding is accommodated by at least two distinct patterns. In the simplest case, all partners share key interactions, and sequences optimized for binding to either single or multiple partners recover only a subset of native amino acid residues as optimal. More interestingly, for signaling interfaces functioning as network "hubs," we identify a different, "multi-faceted" mode, where each binding partner prefers its own subset of wild-type residues within the promiscuous binding site. Here, integration of preferences across all partners results in sequences much more "native-like" than seen in optimization for any single binding partner alone, suggesting these interfaces are substantially optimized for multi-specificity. The two strategies make distinct predictions for interface evolution and design. Shared interfaces may be better small molecule targets, whereas multi-faceted interactions may be more "designable" for altered specificity patterns. The computational methodology presented here is generalizable for examining how naturally occurring protein sequences have been selected to satisfy a variety of positive and negative constraints, as well as for rationally designing proteins to have desired patterns of altered specificity.

Supporting Pre-Service Teachers in Designing Technology-Infused Lesson Plans

Science.gov (United States)

Janssen, N.; Lazonder, A. W.

2016-01-01

The present study compared the effectiveness of two types of just-in-time support for lesson planning. Both types contained the same technological information but differed regarding pedagogical and content information. The first type presented this information separately (i.e., separate support); the second type presented this information in an…

Integrating UNESCO ICT-Based Instructional Materials in Chemistry Lessons

Directory of Open Access Journals (Sweden)

CHARLIE P. NACARIO

2014-08-01

Full Text Available This study determined the effectiveness of the lessons in Chemistry integrating UNESCO ICT-based instructional material on the achievement of Chemistry students at Central Bicol State University of Agriculture. It aimed to identify lessons that may be developed integrating UNESCO ICT-based instructional materials, determine the effect of the developed lessons using the material on: conceptual understanding; science process skills; and attitude towards chemistry and gather insights from the experiences of the students and teacher. The study used the single group pretest and posttest experimental design. Descriptive, quantitative and qualitative techniques were also utilized. Quantitative data were taken from the pretest-posttest results on the Test on Conceptual Understanding, Science Process Skills and Chemistry Attitudinaire. Qualitative data were drawn from the experts’ assessment of the developed lessons and research instruments, and the insights of students and teacher. The developed lessons integrating UNESCO ICT-based instructional materials were Atomic Model and Structure, Periodic Table of Elements, Chemical Bonding, and Balancing Chemical Equation. These lessons increased the conceptual understanding of the students by topic and skill from very low mastery to average mastery level. The students have slightly improved along the different science process skills. After teaching the lessons, the students’ attitude also improved. The students became more motivated and interested in Chemistry and the lessons were student centered and entailed teacher’s competence and flexibility in computer use.

Forum on Specifications and Design Languages 2012

CERN Document Server

2014-01-01

This book brings together a selection of the best papers from the fifteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2012 at Vienna University of Technology, Vienna, Austria.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.  ·         Covers Assertion Based Design, Verification & Debug; ·         Includes language-based modeling and design techniques for embedded systems; ·         Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; ·         Includes formal and semi-formal system level design methods fo...

IMPROVING LECTURERS’ PAEDAGOGIC COMPETENCE THROUGH THE IMPLEMENTATION OF LESSON STUDY IN FACULTY OF TEACHER TRAINING AND EDUCATION OF PAKUAN UNIVERSITY, INDONESIA

Directory of Open Access Journals (Sweden)

Eri Sarimanah

2017-03-01

Full Text Available This research is aimed at improving the lecturers of Faculty of Teacher Training and Education of Pakuan University paedagogic competence through the implementation of lesson study which covers learning management competence including developing chapter design and lesson design, media making, teaching and learning, evaluation, post evaluation follow-up and learning supervision. This research involves four study program. The method used in this research is qualitative descriptive. The data are collected through documentation, observation, interview and questionnaire. The data are analyzed descriptively to investigate the improvement of the lecturers’ paedagogic competence in teaching through the implementation of lesson study. Lesson study has been implemented for two years in Indonesian and Literature Education Study Program, English Education Study Program, Biology Education Study Program, and Primary Education Study Program. The findings show that there is an improvement of the lecturers paedagogic competence in developing chapter design and lesson design, developing material and designing media for learning (plan stage; running the lesson (do stage; and observing the lesson as well as evaluating and reflecting it (see stage. Besides, it is found the lecturers develop learning innovation to create students’ active learning. The colleagality among the lecturers is also develop well through the implementation of lesson study. The questionnaire result also shows that the implementation of lesson study can make the student become autonomous learners.

SEL/Project Language. Level II, Kindergarten, Volume II (Lessons 17-32).

Science.gov (United States)

Valladares, Ann E.; And Others

This curriculum guide contains the Southeastern Education Laboratory/Project Language Lessons 17-32 stressing listening, speaking, and reading readiness for disadvantaged kindergarten children. The lessons are designed to be used in the SEL's mobile preschool units or as readiness materials for kindergarten. The major emphasis of this intervention…

Reflections on Designing a MPA Service-Learning Component: Lessons Learned

Science.gov (United States)

Roman, Alexandru V.

2015-01-01

This article provides the "lessons learned" from the experience of redesigning two sections (face-to-face and online) of a core master of public administration class as a service-learning course. The suggestions made here can be traced to the entire process of the project, from the "seed idea" through its conceptualization and…

Computational network design from functional specifications

KAUST Repository

Peng, Chi Han

2016-07-11

Connectivity and layout of underlying networks largely determine agent behavior and usage in many environments. For example, transportation networks determine the flow of traffic in a neighborhood, whereas building floorplans determine the flow of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications. Such specifications can be in the form of network density, travel time versus network length, traffic type, destination location, etc. We propose an integer programming-based approach that guarantees that the resultant networks are valid by fulfilling all the specified hard constraints and that they score favorably in terms of the objective function. We evaluate our algorithm in two different design settings, street layout and floorplans to demonstrate that diverse networks can emerge purely from high-level functional specifications.

Lessons learned bulletin

International Nuclear Information System (INIS)

1994-05-01

During the past four years, the Department of Energy -- Savannah River Operations Office and the Westinghouse Savannah River Company (WSRC) Environmental Restoration (ER) Program completed various activities ranging from waste site investigations to closure and post closure projects. Critiques for lessons learned regarding project activities are performed at the completion of each project milestone, and this critique interval allows for frequent recognition of lessons learned. In addition to project related lessons learned, ER also performs lessons learned critiques. T'he Savannah River Site (SRS) also obtains lessons learned information from general industry, commercial nuclear industry, naval nuclear programs, and other DOE sites within the complex. Procedures are approved to administer the lessons learned program, and a database is available to catalog applicable lessons learned regarding environmental remediation, restoration, and administrative activities. ER will continue to use this database as a source of information available to SRS personnel

How to use Gagne's model of instructional design in teaching psychomotor skills.

Science.gov (United States)

Khadjooi, Kayvan; Rostami, Kamran; Ishaq, Sauid

2011-01-01

Gagne's model of instructional design is based on the information processing model of the mental events that occur when adults are presented with various stimuli and focuses on the learning outcomes and how to arrange specific instructional events to achieve those outcomes. Applying Gagne's nine-step model is an excellent way to ensure an effective and systematic learning program as it gives structure to the lesson plans and a holistic view to the teaching. In this paper, we have chosen a routine practical procedure that junior doctors need to learn: insertion of a peritoneal (ascitic) drain and we use Gagne's "events of instruction" to design a lesson plan for this subject.

Lessons learned in applying function analysis

International Nuclear Information System (INIS)

Mitchel, G.R.; Davey, E.; Basso, R.

2001-01-01

This paper summarizes the lessons learned in undertaking and applying function analysis based on the recent experience of utility, AECL and international design and assessment projects. Function analysis is an analytical technique that can be used to characterize and asses the functions of a system and is widely recognized as an essential component of a 'systematic' approach to design, on that integrated operational and user requirements into the standard design process. (author)

Lessons learned during Type A Packaging testing

International Nuclear Information System (INIS)

O'Brien, J.H.; Kelly, D.L.

1995-11-01

For the past 6 years, the US Department of Energy (DOE) Office of Facility Safety Analysis (EH-32) has contracted Westinghouse Hanford Company (WHC) to conduct compliance testing on DOE Type A packagings. The packagings are tested for compliance with the U.S. Department of Transportation (DOT) Specification 7A, general packaging, Type A requirements. The DOE has shared the Type A packaging information throughout the nuclear materials transportation community. During testing, there have been recurring areas of packaging design that resulted in testing delays and/or initial failure. The lessons learned during the testing are considered a valuable resource. DOE requested that WHC share this resource. By sharing what is and can be encountered during packaging testing, individuals will hopefully avoid past mistakes

Changing Work Practices in Design

DEFF Research Database (Denmark)

Bødker, Keld; Kensing, F.; Simonsen, Jesper

2000-01-01

The paper presents lessons learned in relation to changing work practices in design. We describe method dissemination activities in three IT-organisations in relation to introducing a method for design in an organisational context. From the activities a number of lessons are drawn....

Interior Design's Role in Educational Specifications.

Science.gov (United States)

Keller, Mary Ann

1986-01-01

An experienced interior designer, equipped with a well-written educational specification, will specify the best materials and coordinate colors, materials, and furnishings in line with the district's budget. (MLF)

Strategies for Successfully Teaching Students with ADD or ADHD in Instrumental Lessons

Science.gov (United States)

Melago, Kathleen A.

2014-01-01

Teachers can easily encounter students with Attention Deficit Disorder (ADD) or Attention Deficit Hyperactivity Disorder (ADHD) in the instrumental lesson setting. Applicable to instrumental lesson settings in the public or private schools, private studios, or college studios, this article focuses on specific strategies ranging from the…

Interpersonal Interactions in Instrumental Lessons: Teacher/Student Verbal and Non-Verbal Behaviours

Science.gov (United States)

Zhukov, Katie

2013-01-01

This study examined verbal and non-verbal teacher/student interpersonal interactions in higher education instrumental music lessons. Twenty-four lessons were videotaped and teacher/student behaviours were analysed using a researcher-designed instrument. The findings indicate predominance of student and teacher joke among the verbal behaviours with…

Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

Energy Technology Data Exchange (ETDEWEB)

Hoover, M.D.; Fencl, A.F.; Newton, G.J. [and others

1995-12-01

Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will {open_quotes}help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.{close_quotes} Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice on Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of {open_quotes}lessons learned{close_quotes} training materials for facility designers, managers, health protection professionals, line supervisors, and workers.

Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

International Nuclear Information System (INIS)

Hoover, M.D.; Fencl, A.F.; Newton, G.J.

1995-01-01

Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will open-quotes help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.close quotes Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice on Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of open-quotes lessons learnedclose quotes training materials for facility designers, managers, health protection professionals, line supervisors, and workers

Medical faculty members' attitude on lesson planning Semnan University of Medical Sciences

Directory of Open Access Journals (Sweden)

Masomeh Saberian

2003-01-01

Full Text Available Background: Lesson planning has a distinct role in enhancing education quality, as well as maintaining the friendly and dynamic atmosphere of the academic environment and increasing student's initiatives for achieving better educational attainments. Lesson planning is a process for defining the goals, understanding the needs, and specifying available tools and possible limitations. Lesson planning is a written description of this process, which shows the materials, the route, the time, and the place of instructions, as well as a method for evaluating students. Purpose: to identify the attitudes of Semnan University of Medical Sciences (SUMS on lesson planning. Methods: Fifty-three faculty members of the SUMS participated in this study. A questionnaire was used, which contained 8 demographic questions, and 24 r questions for identification the faculty members' attitude. Questionnaires were distributed among the faculty members in sealed envelopes, without denoting their names. The questionnaires were gathered after being completed. Results were analyzed by calculating the mean, standard deviation, absolute and relative frequencies, and using Chi-square and Fischer exact test at the level of 5%. Results: II was shown that 88% of faculty members favoured lesson planning before the beginning of the semester. But they found lesson planning a difficult task, because of their heavy workload. Of the faculty members, 60.4% organized their teaching classes according to a designed lesson plan, and believed that it did affect the quality of their teaching, but 49.1% disagreed with distributing the designed lesson plan among the students. Discussion: Although professor favoured lesson planning and find it necessary to work according to such a plan, workload and lack of knowledge are defined as two main obstacles in doing so. It is believed that by decreasing the professor's workload and provision of lesson planning workshops, these problems could be solved

Patient-specific hip prostheses designed by surgeons

Directory of Open Access Journals (Sweden)

Coigny Florian

2016-09-01

Full Text Available Patient-specific bone and joint replacement implants lead to better functional and aesthetic results than conventional methods [1], [2], [3]. But extracting 3D shape information from CT Data and designing individual implants is demanding and requires multiple surgeon-to-engineer interactions. For manufacturing purposes, Additive Manufacturing offers various advantages, especially for low volume manufacturing parts, such as patient specific implants. To ease these new approaches and to avoid surgeon-to-engineer interactions a new design software approach is needed which offers highly automated and user friendly planning steps.

The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students’ Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

OpenAIRE

Hilal Karakış; Ayşen Karamete; Aydın Okçu

2016-01-01

This study examined the effects that computer-assisted instruction had on students’ attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach fractions to fourth-grade students. The skill levels of these students were gauged before and after receiving the computer-assisted instruction. We str...

Machiavelli's "The Prince." [Lesson Plan].

Science.gov (United States)

Discovery Communications, Inc., Bethesda, MD.

Based on Machiavelli's book "The Prince," this lesson plan presents activities designed to help students understand that Machiavelli's enumeration of leadership qualities for a prince has always been controversial; and that leaders and followers may differ in what they identify as the qualities of a good leader. The main activity of the lesson…

"Pride and Prejudice". [Lesson Plan].

Science.gov (United States)

Soderquist, Alisa

Based on Jane Austen's novel "Pride and Prejudice," this lesson plan presents activities designed to help students understand that classics are those pieces of literature that continue to be popular long after they were written; classics tend to have universal themes; and Austen's writing has been updated and dramatized and, most likely, will…

Surgeon Design Interface for Patient-Specific Concentric Tube Robots.

Science.gov (United States)

Morimoto, Tania K; Greer, Joseph D; Hsieh, Michael H; Okamura, Allison M

2016-06-01

Concentric tube robots have potential for use in a wide variety of surgical procedures due to their small size, dexterity, and ability to move in highly curved paths. Unlike most existing clinical robots, the design of these robots can be developed and manufactured on a patient- and procedure-specific basis. The design of concentric tube robots typically requires significant computation and optimization, and it remains unclear how the surgeon should be involved. We propose to use a virtual reality-based design environment for surgeons to easily and intuitively visualize and design a set of concentric tube robots for a specific patient and procedure. In this paper, we describe a novel patient-specific design process in the context of the virtual reality interface. We also show a resulting concentric tube robot design, created by a pediatric urologist to access a kidney stone in a pediatric patient.

Turbine Control System Replacement at NPP NEK; System Specifics, Project Experience and Lessons Learned

International Nuclear Information System (INIS)

Mandic, D.; Zilavy, M. J.

2010-01-01

The main intention of this paper is to present feedback from the implementation of the new Turbine Control System (TCS) replacement project at Nuclear Power Plant (NPP) NEK - Krsko. From the plant construction time and the first plant start-up in 1981, the NPP NEK TG (Turbine-Generator) set was controlled and monitored by DEH (Digital Electro Hydraulic) Mod II Control System designed in 70's based on P2500 CPU and number of I/O controllers and modules. The P2500 CPU and associated controllers were built with discrete TTL components (TTL logic chips) and the P2500 CPU had 64k of 16 bit words of ferrite core memory. For that time, DEH Mod II had sophisticated MCR (Main Control Room) HMI (Human Machine Interface) based on digital functional keyboards, one alphanumeric black and white CRT monitor and printer. After twenty eight years of operation and because of several other reasons that are explained in the paper, NEK decided to replace the old DEH Mod II Control system with the new Emerson Ovation based DCS (Distributed Control System) on redundant platform for the control and monitoring of secondary plant systems in the NPP Krsko (NEK), and the new system was named PDEH (Programmable Digital Electro Hydraulic) TCS. In May 2007, NEK signed the turn-key contract with Westinghouse Electric Company (WEC) for the project of replacement of the TCS, Turbine Emergency Trip System (ETS), Moisture Separator Reheater (MSR) control and some other control and monitoring functions. WEC subcontracted a number of other companies for equipment delivery, AE (Architect Engineering Design) activities, specific software development tasks (changes of KFSS - Krsko Full Scope Simulator and PIS - Process Information System interface) and field installation activities. The subject project enveloped implementation of PDEH system on three application platforms: BG KFSS (Background KFSS), FG KFSS (Foreground KFSS) and PDEH system installed in the plant. The HMI for the BG KFSS platform

Some design lessons from market-based greenhouse gas regulation in the restructured Australian electricity industry

International Nuclear Information System (INIS)

MacGill, Iain; Outhred, Hugh; Nolles, Karel

2006-01-01

There is growing worldwide interest in the use of market-based policy instruments for climate change regulation in the electricity sector. These mechanisms would seem to offer some efficiency and flexibility advantages over more traditional regulatory approaches, while being highly compatible with competitive market-based electricity industries. Australia has been an early and enthusiastic adopter of both electricity industry restructuring and market-based environmental instruments. This paper first outlines some of these recent policy developments. In particular, we describe the objectives, design and outcomes to date of electricity industry restructuring, the Mandatory Renewable Energy Target, the NSW Greenhouse Benchmarks, the Queensland 13% Gas scheme and Government accredited Green Power. From this, we draw some key design lessons for such market-based instruments. These include the perils of abstraction in scheme design, the vital importance of setting appropriate baselines in 'baseline and credit' schemes, the possibility that such measures may interact in ways that reduce their environmental effectiveness, 'market for lemon' risks with tradable instruments that have measurement, verification or 'additionality' difficulties, and the challenges of creating transparent liquid markets for these mechanisms. The mixed performance of these Australian schemes to date illustrates the need for great care in designing such market-based approaches

Some design lessons from market-based greenhouse gas regulation in the restructured Australian electricity industry

Energy Technology Data Exchange (ETDEWEB)

MacGill, Iain [School of Electrical Engineering and Telecommunications, University of New South Wales, Sydney NSW 2052 (Australia)] e-mail: i.macgill@unsw.edu.au; Outhred, Hugh [School of Electrical Engineering and Telecommunications, University of New South Wales, Sydney NSW 2052 (Australia); Nolles, Karel [School of Electrical Engineering and Telecommunications, University of New South Wales, Sydney NSW 2052 (Australia)

2006-01-01

There is growing worldwide interest in the use of market-based policy instruments for climate change regulation in the electricity sector. These mechanisms would seem to offer some efficiency and flexibility advantages over more traditional regulatory approaches, while being highly compatible with competitive market-based electricity industries. Australia has been an early and enthusiastic adopter of both electricity industry restructuring and market-based environmental instruments. This paper first outlines some of these recent policy developments. In particular, we describe the objectives, design and outcomes to date of electricity industry restructuring, the Mandatory Renewable Energy Target, the NSW Greenhouse Benchmarks, the Queensland 13% Gas scheme and Government accredited Green Power. From this, we draw some key design lessons for such market-based instruments. These include the perils of abstraction in scheme design, the vital importance of setting appropriate baselines in 'baseline and credit' schemes, the possibility that such measures may interact in ways that reduce their environmental effectiveness, 'market for lemon' risks with tradable instruments that have measurement, verification or 'additionality' difficulties, and the challenges of creating transparent liquid markets for these mechanisms. The mixed performance of these Australian schemes to date illustrates the need for great care in designing such market-based approaches.

Some design lessons from market-based greenhouse gas regulation in the restructured Australian electricity industry

Energy Technology Data Exchange (ETDEWEB)

Iain MacGill; Hugh Outhred; Karel Nolles [University of New South Wales, Sydney, NSW (Australia). School of Electrical Engineering & Telecommunications

2006-01-01

There is growing worldwide interest in the use of market-based policy instruments for climate change regulation in the electricity sector. These mechanisms would seem to offer some efficiency and flexibility advantages over more traditional regulatory approaches, while being highly compatible with competitive market-based electricity industries. Australia has been an early and enthusiastic adopter of both electricity industry restructuring and market-based environmental instruments. This paper first outlines some of these recent policy developments. It then describes the objectives, design and outcomes to date of electricity industry restructuring, the Mandatory Renewable Energy Target, the NSW Greenhouse Benchmarks, the Queensland 13% Gas scheme and Government accredited Green Power. From this, some key design lessons are drawn for such market-based instruments. These include the perils of abstraction in scheme design, the vital importance of setting appropriate baselines in 'baseline and credit' schemes, the possibility that such measures may interact in ways that reduce their environmental effectiveness, 'market for lemon' risks with tradable instruments that have measurement, verification or 'additionality' difficulties, and the challenges of creating transparent liquid markets for these mechanisms. The mixed performance of these Australian schemes to date illustrates the need for great care in designing such market-based approaches. 36 refs., 2 figs.

Lessons Learned In Developing The VACIS Products

International Nuclear Information System (INIS)

Orphan, Victor J.

2011-01-01

SAIC's development of VACIS provides useful 'lessons learned' in bridging the gap from an idea to a security or contraband detection product. From a gamma densitometer idea for solving a specific Customs Service (CS) requirement (detection of drugs in near-empty tanker trucks) in mid-1990's, SAIC developed a broad line of vehicle and cargo inspections systems (over 500 systems deployed to date) based on a gamma-ray radiographic imaging technique. This paper analyzes the reasons for the successful development of VACIS and attempts to identify ''lessons learned'' useful for future security and contraband detection product developments.

Computational network design from functional specifications

KAUST Repository

Peng, Chi Han; Yang, Yong Liang; Bao, Fan; Fink, Daniel; Yan, Dongming; Wonka, Peter; Mitra, Niloy J.

2016-01-01

of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications

Integrating self-regulated learning and discovery learning into English lesson plan

Directory of Open Access Journals (Sweden)

Sayukti Ni Kadek Heny

2018-01-01

Full Text Available The notion of learner-centeredness has been embedded in the National Curriculum of Indonesia, 2013 Curriculum. However, most of the teachers seem to be hardly acquainted with the concept of Self-Regulated Learning (SRL and discovery learning in the lesson planning. Considering the phenomenon, this study intends to explore the concept of Self-Regulated Learning in the lesson plan of English subject for a tenth-grade level by employing a qualitative design with data obtained from a teacher-made lesson plan and a semi-structured interview. The researcher used content analysis to analyze the lesson plan. Meanwhile, the qualitative data from interview result were preceded through a coding sheet and transcribed modified figure. The findings revealed an integration of SRL cyclical phase and discovery learning in the teacher-made lesson plan. Based on the discussion, the results need to be applied in a considerably large context, in order to see thoroughly dynamic integration between Self-Regulated Learning model, lesson planning and the concept of learner autonomy.

Lesson Play Tasks as a Creative Venture for Teachers and Teacher Educators

Science.gov (United States)

Zazkis, Rina

2017-01-01

This study focuses on instances of creativity in the design of Lesson Play tasks and in prospective teachers' responses to the tasks. A Lesson Play task assumes a theatrical interpretation of the word "play" and requires teachers to write a script for an imaginary interaction between a teacher-character and student-characters, attending…

The Great Gatsby. [Lesson Plan].

Science.gov (United States)

Zelasko, Ken

Based on F. Scott Fitzgerald's novel "The Great Gatsby," this lesson plan presents activities designed to help students understand that adapting part of a novel into a dramatic reading makes students more intimate with the author's intentions and craft; and that a part of a novel may lend itself to various oral interpretations. The main activity…

International Space Station Passive Thermal Control System Analysis, Top Ten Lessons-Learned

Science.gov (United States)

Iovine, John

2011-01-01

The International Space Station (ISS) has been on-orbit for over 10 years, and there have been numerous technical challenges along the way from design to assembly to on-orbit anomalies and repairs. The Passive Thermal Control System (PTCS) management team has been a key player in successfully dealing with these challenges. The PTCS team performs thermal analysis in support of design and verification, launch and assembly constraints, integration, sustaining engineering, failure response, and model validation. This analysis is a significant body of work and provides a unique opportunity to compile a wealth of real world engineering and analysis knowledge and the corresponding lessons-learned. The analysis lessons encompass the full life cycle of flight hardware from design to on-orbit performance and sustaining engineering. These lessons can provide significant insight for new projects and programs. Key areas to be presented include thermal model fidelity, verification methods, analysis uncertainty, and operations support.

The Hierarchical Specification and Mechanical Verification of the SIFT Design

Science.gov (United States)

1983-01-01

The formal specification and proof methodology employed to demonstrate that the SIFT computer system meets its requirements are described. The hierarchy of design specifications is shown, from very abstract descriptions of system function down to the implementation. The most abstract design specifications are simple and easy to understand, almost all details of the realization were abstracted out, and are used to ensure that the system functions reliably and as intended. A succession of lower level specifications refines these specifications into more detailed, and more complex, views of the system design, culminating in the Pascal implementation. The section describes the rigorous mechanical proof that the abstract specifications are satisfied by the actual implementation.

The history of a lesson

DEFF Research Database (Denmark)

Rasmussen, Mikkel Vedby

2003-01-01

and emphasises the need to study the history of lessons rather than the lessons of history. This approach shows that Munich is the end point of a constitutive history that begins in the failure of the Versailles treaty to create a durable European order following the First World War. The Munich lesson is thus......The article investigates the concept of lessons in IR. By means of a constructivist critique of the 'lessons literature', the article analyses one of the most important of IR lessons: that of Munich. Examining how the Munich lesson came about, the article shows the praxeological nature of lessons...... one element of the lesson of Versailles, which is a praxeology that defines how the West is to make peace, and against whom peace must be defended. The lesson of Versailles has been, at least in part, constitutive of the outbreak of the Cold War, and it continues to define the Western conception...

A systematic design method for robust synthetic biology to satisfy design specifications.

Science.gov (United States)

Chen, Bor-Sen; Wu, Chih-Hung

2009-06-30

Synthetic biology is foreseen to have important applications in biotechnology and medicine, and is expected to contribute significantly to a better understanding of the functioning of complex biological systems. However, the development of synthetic gene networks is still difficult and most newly created gene networks are non-functioning due to intrinsic parameter uncertainties, external disturbances and functional variations of intra- and extra-cellular environments. The design method for a robust synthetic gene network that works properly in a host cell under these intrinsic parameter uncertainties and external disturbances is the most important topic in synthetic biology. In this study, we propose a stochastic model that includes parameter fluctuations and external disturbances to mimic the dynamic behaviors of a synthetic gene network in the host cell. Then, based on this stochastic model, four design specifications are introduced to guarantee that a synthetic gene network can achieve its desired steady state behavior in spite of parameter fluctuations, external disturbances and functional variations in the host cell. We propose a systematic method to select a set of appropriate design parameters for a synthetic gene network that will satisfy these design specifications so that the intrinsic parameter fluctuations can be tolerated, the external disturbances can be efficiently filtered, and most importantly, the desired steady states can be achieved. Thus the synthetic gene network can work properly in a host cell under intrinsic parameter uncertainties, external disturbances and functional variations. Finally, a design procedure for the robust synthetic gene network is developed and a design example is given in silico to confirm the performance of the proposed method. Based on four design specifications, a systematic design procedure is developed for designers to engineer a robust synthetic biology network that can achieve its desired steady state behavior

A summary of lessons learned activities conducted at the OECD Halden Reactor Project

International Nuclear Information System (INIS)

Hallbert, B.P.

1997-01-01

A series of lessons learned studies have been conducted at the OECD Halden Reactor Project. The purpose of these lessons learned reports are to summarize knowledge and experience gained across a number of research project. This paper presents a summary of main issues addressed in four of these lessons learned projects. These are concerned with software development and quality assurance, software reliability, methods for test and evaluation of developed systems, and the evaluation of system design features

Lesson Learning at JPL

Science.gov (United States)

Oberhettinger, David

2011-01-01

A lessons learned system is a hallmark of a mature engineering organization A formal lessons learned process can help assure that valuable lessons get written and published, that they are well-written, and that the essential information is "infused" into institutional practice. Requires high-level institutional commitment, and everyone's participation in gathering, disseminating, and using the lessons

Designing Conservation Corridors in Production Landscapes: Assessment Methods, Implementation Issues, and Lessons Learned

Directory of Open Access Journals (Sweden)

Amanda T. Lombard

2010-09-01

Full Text Available Designing broad-scale conservation corridors has become increasingly common as a way of conducting an assessment for achieving targets for the representation and persistence of nature. However, since many of these corridors must traverse agricultural and other production landscapes, planning and implementation are not trivial tasks. Most approaches to conservation assessments in the dynamic world of production landscapes are data-intensive and analytically complex. However, in the real world, donor and other external requirements impose time and budget constraints, and dictate strong stakeholder involvement in the entire planning process. In order to accommodate this, assessments must be rapid, cheap, and the approach and products must be comprehensible and acceptable to stakeholders. Here we describe such an assessment aimed at identifying and implementing a network of conservation corridors in the Gouritz Initiative project domain of South Africa's Cape Floristic Region hotspot. We used empirical data and expert knowledge to identify a corridor network hypothesized to sustain key ecological and evolutionary processes. We also consulted experts to provide a spatially explicit assessment of the opportunity costs of conservation associated with agriculture, the predominant land use in the region. We used these products to identify categories of land requiring different actions and instruments to achieve conservation goals, thereby moving from the "where" to the "how" of conservation. This information was then fed into the collaborative strategy development process for the Gouritz Initiative. Our discussion emphasizes the lessons that we learnt from undertaking this assessment, particularly lessons regarding the implementation of the planning products. We conclude that at the outset of any planning project, a consensus on the vision must be achieved, a detailed social assessment of appropriate institutions must be undertaken, and a learning

Lessons Learned from Past and Ongoing Construction Projects

International Nuclear Information System (INIS)

Tabatabai, Omid

2011-01-01

Full text of publication follows: The nuclear industry in the U.S. faced many construction quality and design issues in the 1970's and 1980's. In 1984, the NRC issued NUREG-1055, 'Improving Quality and the Assurance of Quality in the Design and Construction of Nuclear Power Plants,' to document the lessons learned from nuclear power plant (NPP) construction in the U.S. In recent years, several countries have begun either planning for or actually constructing new NPPs. For instance, in the U.S., the nuclear industry has submitted several combined license and design certification applications to the NRC for licensing reviews and approval to build 30+ new NPP units. Latest construction experience from countries that are currently building new NPPs indicate that these countries are dealing with challenges that are similar to those issues that caused major quality assurance problems, delays, or even termination of several projects in U.S. in the 70's and 80's. The U.S. NRC is pro-actively taking measures to improve its regulatory programs as well as construction oversight activities before new NPPs construction begin in the U.S. In late 2007, the U.S. NRC's Office of New Reactors established a construction experience program (ConE) to obtain and evaluate construction and operating experience events and to identify the lessons learned from these events. In March 2009, the NRC published an Office Instruction to provide a process for incorporating the lessons learned and insights from the design, construction, and operation of the international and domestic NPPs into the licensing reviews, inspections, and construction of new reactors in the U.S. Additionally, the ConE program staff developed a Web-enabled database to store, manage, and make construction experience information available to all NRC technical reviewers as well as inspectors. Because this database contains information from other countries' regulators that are considered

One size fits all? Designer-institutions: Lessons from two flawed attempts in Malawi

Directory of Open Access Journals (Sweden)

Tomas Moe Skjølsvold

2010-07-01

Full Text Available This article observes two examples of attempted institutional design in Malawi's central region, Kasungu. In both cases external development actors enter local communities, and establish infrastructure to exploit two common sources of water. One is the exploitation of a river for group irrigation, the other a borehole to facilitate appropriation from a source of ground water. In both cases the infrastructure is accompanied by elaborate schemes of governance, ignoring the pre-existing social and bio-physical traits of the area. The results are two non-robust systems, collapsing under the weight of latent conflicts fuelled by the areas pre-existing institutional and bio-physical configuration. Using the framework of robustness in Social-Ecological Systems as a practical-analytical tool, the entities of the two systems are identified and their failure illustrated. The particular lessons drawn from the two cases are transformed into five general points meant to stimulate both development practitioners and future research endeavors.

Designing Epigenome Editors: Considerations of Biochemical and Locus Specificities.

Science.gov (United States)

Sen, Dilara; Keung, Albert J

2018-01-01

The advent of locus-specific protein recruitment technologies has enabled a new class of studies in chromatin biology. Epigenome editors enable biochemical modifications of chromatin at almost any specific endogenous locus. Their locus specificity unlocks unique information including the functional roles of distinct modifications at specific genomic loci. Given the growing interest in using these tools for biological and translational studies, there are many specific design considerations depending on the scientific question or clinical need. Here we present and discuss important design considerations and challenges regarding the biochemical and locus specificities of epigenome editors. These include how to account for the complex biochemical diversity of chromatin; control for potential interdependency of epigenome editors and their resultant modifications; avoid sequestration effects; quantify the locus specificity of epigenome editors; and improve locus specificity by considering concentration, affinity, avidity, and sequestration effects.

Enhancing mathematics teachers' quality through Lesson Study.

Science.gov (United States)

Lomibao, Laila S

2016-01-01

The efficiency and effectivity of the learning experience is dependent on the teacher quality, thus, enhancing teacher's quality is vital in improving the students learning outcome. Since, the usual top-down one-shot cascading model practice for teachers' professional development in Philippines has been observed to have much information dilution, and the Southeast Asian Ministers of Education Organization demanded the need to develop mathematics teachers' quality standards through the Southeast Asia Regional Standards for Mathematics Teachers (SEARS-MT), thus, an intensive, ongoing professional development model should be provided to teachers. This study was undertaken to determine the impact of Lesson Study on Bulua National High School mathematics teachers' quality level in terms of SEARS-MT dimensions. A mixed method of quantitative-qualitative research design was employed. Results of the analysis revealed that Lesson Study effectively enhanced mathematics teachers' quality and promoted teachers professional development. Teachers positively perceived Lesson Study to be beneficial for them to become a better mathematics teacher.

Comparison of plant-specific probabilistic safety assessments and lessons learned

Energy Technology Data Exchange (ETDEWEB)

Balfanz, H.P. [TUeV Nord, Hamburg (Germany); Berg, H.P. [Bundesamt fuer Strahlenschutz, Salzgitter (Germany); Steininger, U. [TUeV Energie- und Systemtechnik GmbH, Unternehmensgruppe TUeV Sueddeutschland, Muenchen (Germany)

2001-11-01

Probabilistic safety assessments (PSA) have been performed for all German nuclear power plants in operation. These assessments are mainly based on the recent German PSA guide and an earlier draft, respectively. However, comparison of these PSA show differences in the results which are discussed in this paper. Lessons learned from this comparison and further development of the PSA methodology are described. (orig.) [German] Probabilistische Sicherheitsanalysen (PSA) sind fuer alle in Betrieb befindlichen deutschen Kernkraftwerke durchgefuehrt worden. Diese Analysen basierten in der Regel auf dem aktuellen deutschen PSA-Leitfaden bzw. einem frueheren Entwurf. Ein Vergleich dieser PSA zeigt Unterschiede in den Ergebnissen, die in diesem Beitrag diskutiert werden. Erfahrungen und Erkenntnisse, die aus diesem Vergleich abgeleitet werden koennen, und weitere Entwicklungen der PSA-Methoden werden beschrieben. (orig.)

Learning from Lessons: studying the structure and construction of mathematics teacher knowledge in Australia, China and Germany

Science.gov (United States)

Chan, Man Ching Esther; Clarke, David J.; Clarke, Doug M.; Roche, Anne; Cao, Yiming; Peter-Koop, Andrea

2018-03-01

The major premise of this project is that teachers learn from the act of teaching a lesson. Rather than asking "What must a teacher already know in order to practice effectively?", this project asks "What might a teacher learn through their activities in the classroom and how might this learning be optimised?" In this project, controlled conditions are created utilising purposefully designed and trialled lesson plans to investigate the process of teacher knowledge construction, with teacher selective attention proposed as a key mediating variable. In order to investigate teacher learning through classroom practice, the project addresses the following questions: To what classroom objects, actions and events do teachers attend and with what consequence for their learning? Do teachers in different countries attend to different classroom events and consequently derive different learning benefits from teaching a lesson? This international project combines focused case studies with an online survey of mathematics teachers' selective attention and consequent learning in Australia, China and Germany. Data include the teacher's adaptation of a pre-designed lesson, the teacher's actions during the lesson, the teacher's reflective thoughts about the lesson and, most importantly, the consequences for the planning and delivery of a second lesson. The combination of fine-grained, culturally situated case studies and large-scale online survey provides mutually informing benefits from each research approach. The research design, so constituted, offers the means to a new and scalable vision of teacher learning and its promotion.

Lessons Learned for the MICE Coupling Solenoid from the MICE Spectrometer Solenoids

International Nuclear Information System (INIS)

Green, Michael A.; Wang, Li; Pan, Heng; Wu, Hong; Guo, Xinglong; Li, S.Y.; Zheng, S.X.; Virostek, Steve P.; DeMello, Allen J.; Li, Derun; Trillaud, Frederick; Zisman, Michael S.

2010-01-01

Tests of the spectrometer solenoids have taught us some important lessons. The spectrometer magnet lessons learned fall into two broad categories that involve the two stages of the coolers that are used to cool the magnets. On the first spectrometer magnet, the problems were centered on the connection of the cooler 2nd-stage to the magnet cold mass. On the first test of the second spectrometer magnet, the problems were centered on the cooler 1st-stage temperature and its effect on the operation of the HTS leads. The second time the second spectrometer magnet was tested; the cooling to the cold mass was still not adequate. The cryogenic designs of the MICE and MuCOOL coupling magnets are quite different, but the lessons learned from the tests of the spectrometer magnets have affected the design of the coupling magnets.

The X-15 airplane - Lessons learned

Science.gov (United States)

Dana, William H.

1993-01-01

The X-15 rocket research airplane flew to an altitude of 354,000 ft and reached Mach 6.70. In almost 200 flights, this airplane was used to gather aerodynamic-heating, structural loads, stability and control, and atmospheric-reentry data. This paper describes the origins, design, and operation of the X-15 airplane. In addition, lessons learned from the X-15 airplane that are applicable to designing and testing the National Aero-Space Plane are discussed.

Flipped Learning, MOOCs and Learning Analytics: Lessons learnt from a Web Map Design course redesign

Science.gov (United States)

Treves, R.

2013-12-01

Five weeks content of a 12 week course in web map design were converted to 'flipped learning': Lecture sessions were replaced by online short video lectures and multiple choice questions to be completed outside class. Class time was taken up with activities and exercises linked to the online learning. Students use of the online content was carefully tracked and detailed student feedback gathered. The response from students was good, 90% of them completed all the out of class activities and their feedback was very positive. The format has the advantage of being easily repurposed as a MOOC or scaled up in other ways. Lessons learnt from the implementation of the materials and the analysis of the VLE logs will be discussed as will ongoing efforts to reuse the materials in a MOOC.

Automated Design of Application-Specific Smart Camera Architectures

NARCIS (Netherlands)

Caarls, W.

2008-01-01

Parallel heterogeneous multiprocessor systems are often shunned in embedded system design, not only because of their design complexity but because of the programming burden. Programs for such systems are architecture-dependent: the application developer needs architecture-specific knowledge to

Connecting polar research to NGSS STEM classroom lessons

Science.gov (United States)

Brinker, R.; Kast, D.

2016-12-01

Next Generation Science Standards (NGSS) are designed to bring consistent, rigorous science teaching across the United States. Topics are categorized as Performance Expectations (PE), Disciplinary Core Ideas (DCI), Cross-Cutting Concepts (CCC), and Science and Engineering Practices (SEP). NGSS includes a focus on environmental science and climate change across grade levels. Earth and planetary sciences are required at the high school level. Integrating polar science lessons into NGSS classrooms brings relevant, rigorous climate change curriculum across grade levels. Polar science provides opportunities for students to use current data during lessons, conduct their own field work, and collaborate with scientists. Polar science provides a framework of learning that is novel to most students. Inquiry and engagement are high with polar science lessons. Phenomenon related to polar science provide an excellent tool for science teachers to use to engage students in a lesson, stimulate inquiry, and promote critical thinking. When taught effectively, students see the connections between their community, polar regions and climate change, regardless of where on the planet students live. This presentation describes examples of how to effectively implement NGSS lessons by incorporating polar science lessons and field research. Examples of introductory phenomenon and aligned PEs, CCCs, DCIs, and SEPs are given. Suggested student activities, assessments, examples of student work, student research, labs, and PolarTREC fieldwork, use of current science data, and connections to scientists in the field are provided. The goals of the presentation are to give teachers a blueprint to follow when implementing NGSS lessons, and give scientists an understanding of the basics of NGSS so they may be better able to relate their work to U.S. science education and be more effective communicators of their science findings.

TMI-2: Lessons learned by the US Department of Energy: A programmatic perspective

International Nuclear Information System (INIS)

Schmitt, R.C.; Reno, H.W.; Bentley, K.J.; Owens, D.E.

1990-03-01

This report is a summary of the lessons learned by the US Department of Energy during its decade-long participation in the research and accident cleanup project at Three Mile Island Nuclear Power Station Unit 2 near Harrisburg, Pennsylvania. It is based on a review of a wide range of project documents and interviews with personnel from the many organizations involved. The lessons are organized into major subjects with a brief background section to orient the reader to that subject. The subjects are divided into sub-topics, each with a brief discussion and a series of lessons learned. The lessons are very brief and each is preceded with a keyword phrase to highlight its specific topic. References are given so that the details of the subject and the lesson can be further investigated. 99 refs., 24 figs

The key factors affecting students' individual interest in school science lessons

Science.gov (United States)

Cheung, Derek

2018-01-01

Individual interest in school science lessons can be defined as a relatively stable and enduring personal emotion comprising affective and behavioural reactions to events in the regular science lessons at school. Little research has compared the importance of different factors affecting students' individual interest in school science lessons. The present study aimed to address this gap, using a mixed methods design. Qualitative interview data were collected from 60 Hong Kong junior secondary school students, who were asked to describe the nature of their interest in science lessons and the factors to which they attribute this. Teacher interviews, parent interviews, and classroom observations were conducted to triangulate student interview data. Five factors affecting students' individual interest in school science lessons were identified: situational influences in science lessons, individual interest in science, science self-concept, grade level, and gender. Quantitative data were then collected from 591 students using a questionnaire. Structural equation modelling was applied to test a hypothesised model, which provided an acceptable fit to the student data. The strongest factor affecting students' individual interest in school science lessons was science self-concept, followed by individual interest in science and situational influences in science lessons. Grade level and gender were found to be nonsignificant factors. These findings suggest that teachers should pay special attention to the association between academic self-concept and interest if they want to motivate students to learn science at school.

Using a Before-During-After (BDA) Model to Plan Effective Secondary Mathematics Lessons

Science.gov (United States)

Wilburne, Jane Murphy; Peterson, Winnie

2007-01-01

Creating effective mathematics lessons can be a challenge for any teacher. One approach to design an effective lesson is using a before-during-after (BDA) format. This article describes what a BDA format is and provides two examples of how it is implemented in high school mathematics classes. (Contains 2 tables and 5 figures.)

Lessons drawn from serious accidents in nuclear power stations

International Nuclear Information System (INIS)

Kosciusko-Morizet, F.; Tanguy, P.

1981-01-01

Taking a number of serious accidents considered to be particularly representative (Windscale, Enrico Fermi, Lucens, Browns Ferry, Three Mile Island and Saint-Laurent-des-Eaux), the paper analyses the conclusions reached in subsequent enquiries and the lessons drawn from them by the responsible authorities. While design problems sometimes come to light, it is much more generally operational safety - problems related to instructions, the training of operators, the man/machine relationship - which appears to be inadequate. The organization of relations between the different partners - builders, operators and safety bodies - likewise gives rise to some observations. Certain measures should be pursued on a broader scale in order to improve our ability to prevent serious accidents: (i) incidents important from the standpoint of safety must be identified; (ii) these incidents must be brought to the knowledge of all partners concerned, in all interested countries; (iii) the lessons drawn from them must be exchanged and compared; and (iv) the lessons must be made generally available in a directly usable form (i.e. as design modifications, changes in instructions and so on). Particular attention must be given to the problems of countries which are embarking on nuclear programmes and which, with a small number of installations, need direct and permanent access to all the lessons drawn from the operation of a large power station park, and must be able to call upon the assistance of teams from outside in the event of an accident. (author)

China: The Exchange of Goods and Ideas along the Silk Road. A Lesson for 7th Grade World History.

Science.gov (United States)

Alton, Shelley; Bernstein-Potter, Gordon; Bohuchot, Aimee; Hott, Sheryl; Pisi, Frank

This lesson plan focuses on China's Silk Road (300 B.C.-1300 A.D.), specifically the exchange of goods and ideas along its route. The lesson consists of four activities: (1) "Geography"; (2) "Matrix"; (3) "Advertisement"; and (4) "Oral Presentation." The lesson presents goals, provides background, and…

Innovative ways of studying the effect of migration on obesity and diabetes beyond the common designs: lessons from the RODAM study.

Science.gov (United States)

Agyemang, Charles; Beune, Erik; Meeks, Karlijn; Addo, Juliet; Aikins, Ama de-Graft; Bahendeka, Silver; Danquah, Ina; Mockenhaupt, Frank P; Schulze, Matthias B; Klipstein-Grobusch, Kerstin; Smeeth, Liam; Stronks, Karien

2017-03-01

Type 2 diabetes and obesity are major global public health problems, with migrant populations in high-income countries being particularly affected. Type 2 diabetes and obesity are also major threats in low- and middle-income countries, from which most migrant populations originate. Transitioning of societies and the resulting changes in lifestyles are thought to be major driving forces, but the key specific factors within this broad category still need to be determined. Migrant studies provide a unique opportunity to understand the potential underlying causes of these conditions, but current research is mainly geared toward analyzing the differences between migrants and the host populations in the countries of settlement. For better understanding, there is a need to extend migrant health research across national boundaries. This review discusses innovative ways of studying the effect of migration on type 2 diabetes and obesity beyond the common designs and the relevance of extending migrant health studies across national boundaries in the current era of increasing global migration. Specifically, we describe the burden and different methods for conducting migrant studies. We use the Research on Obesity and Diabetes among African Migrants (RODAM) study as a case study, discussing the methods, some results, and lessons learned, including challenges and an essential recipe for success that may guide future migrant health research. © 2016 New York Academy of Sciences.

Specification styles in distributed systems design and verification

NARCIS (Netherlands)

Vissers, C.A.; Scollo, Giuseppe; van Sinderen, Marten J.; Brinksma, Hendrik

1991-01-01

Substantial experience with the use of formal specification languages in the design of distributed systems has shown that finding appropriate structures for formal specifications presents a serious, and often underestimated problem. Its solutions are of great importance for ensuring the quality of

Lessons Learned From Microkernel Verification — Specification is the New Bottleneck

Directory of Open Access Journals (Sweden)

Thorsten Bormer

2012-11-01

Full Text Available Software verification tools have become a lot more powerful in recent years. Even verification of large, complex systems is feasible, as demonstrated in the L4.verified and Verisoft XT projects. Still, functional verification of large software systems is rare – for reasons beyond the large scale of verification effort needed due to the size alone. In this paper we report on lessons learned for verification of large software systems based on the experience gained in microkernel verification in the Verisoft XT project. We discuss a number of issues that impede widespread introduction of formal verification in the software life-cycle process.

Applying Additive Manufacturing to a New Liquid Oxygen Turbopump Design

Science.gov (United States)

O’Neal, T. Derek

2016-01-01

A liquid oxygen turbopump has been designed at Marshall Space Flight Center as part of the in-house, Advanced Manufacturing Demonstrator Engine (AMDE) project. Additive manufacturing, specifically direct metal laser sintering (DMLS) of Inconel 718, is used for 77% of the parts by mass. These parts include the impeller, turbine components, and housings. This paper discusses the impacts of the DMLS fabrication technique on the design of the turbopump and lessons learned during DMLS hardware fabrication and material testing.

Material science lesson from the biological photosystem.

Science.gov (United States)

Kim, Younghye; Lee, Jun Ho; Ha, Heonjin; Im, Sang Won; Nam, Ki Tae

2016-01-01

Inspired by photosynthesis, artificial systems for a sustainable energy supply are being designed. Each sequential energy conversion process from light to biomass in natural photosynthesis is a valuable model for an energy collection, transport and conversion system. Notwithstanding the numerous lessons of nature that provide inspiration for new developments, the features of natural photosynthesis need to be reengineered to meet man's demands. This review describes recent strategies toward adapting key lessons from natural photosynthesis to artificial systems. We focus on the underlying material science in photosynthesis that combines photosystems as pivotal functional materials and a range of materials into an integrated system. Finally, a perspective on the future development of photosynthesis mimetic energy systems is proposed.

Operability design review of prototype large breeder reactor (PLBR) designs. Final report, September 1981

International Nuclear Information System (INIS)

Beakes, J.H.; Ehman, J.R.; Jones, H.M.; Kinne, B.V.T.; Price, C.M.; Shores, S.P.; Welch, J.K.

1981-09-01

Prototype Large Breeder Reactor (PLBR) designs were reviewed by personnel with extensive power plant operations experience. Fourteen normal and off-normal events, such as startup, shutdown, refueling, reactor scram and loss of feedwater, were evaluated using an operational evaluation methodology which is designed to facilitate talk-through sessions on operational events. Human factors engineers participated in the review and assisted in developing and refining the review methodologies. Operating experience at breeder reactor facilities such as Experimental Breeder Reactor-II (EBR-II), Enrico Fermi Atomic Power Plant - Unit 1, and the Fast Flux Test Facility (FFTF) was gathered, analyzed, and used to determine whether lessons learned from operational experience had been incorporated into the PLBR designs. This eighteen month effort resulted in approximately one hundred specific recommendations for improving the operability of PLBR designs

Safety design criteria for the next generation Sodium-cooled fast reactors based on lessons learned from the Fukushima NPS accident

International Nuclear Information System (INIS)

Sakai, Takaaki

2012-01-01

In this presentation, architecture of the safety design criteria as requirements for SFR system and the activities on safety research works to establish safety evaluation methods for the next generation SFRs are summarized with the basis on lessons learned from the Fukushima NPS accident. Nuclear safety is a grovel issue which should be achieved by the international cooperation. In respect of the development for the next generation reactor, it is necessary to build the harmonized safety criteria and evaluation methods to establish the next level of safety

Parental Involvement in Children's Independent Music Lessons

Science.gov (United States)

Upitis, Rena; Abrami, Philip C.; Brook, Julia; King, Matthew

2017-01-01

The purpose of the study was to examine types of parental involvement associated with independent music lessons. A self-report survey was designed to explore parent characteristics, parental goals, students' musical progress, the teacher-student relationship, the practice environment, and parent behaviours during practice sessions. The extent to…

Evaluation of World Wide Web-based Lessons for a First Year Dental Biochemistry Course

Directory of Open Access Journals (Sweden)

Dr. Alan E. Levine

2002-11-01

Full Text Available First year dental students at The University of Texas Dental Branch at Houston (Dental Branch are required to take a basic biochemistry course. To facilitate learning and allow student self-assessment of their progress, WWW-based lessons covering intermediary metabolism were developed as a supplement to traditional lectures. Lesson design combined text, graphics, and animations and included learner control, links to other learning resources, and practice exercises and exams with immediate feedback. Results from an on-line questionnaire completed by students in two different classes showed that they completed 50% of the lessons and spent an average of 4 hrs. on-line. A majority of the students either agreed or strongly agreed that practice exercises were helpful, that the ability to control the pace of the lessons was important, that the lesson structure and presentation was easy to follow, that the illustrations, animations, and hyperlinks were helpful, and that the lessons were effective as a review. The very positive response to the WWW-based lessons indicates the usefulness of this approach as a study aid for dental students.

Specification, Design, and Analysis of Advanced HUMS Architectures

Science.gov (United States)

Mukkamala, Ravi

2004-01-01

During the two-year project period, we have worked on several aspects of domain-specific architectures for HUMS. In particular, we looked at using scenario-based approach for the design and designed a language for describing such architectures. The language is now being used in all aspects of our HUMS design. In particular, we have made contributions in the following areas. 1) We have employed scenarios in the development of HUMS in three main areas. They are: (a) To improve reusability by using scenarios as a library indexing tool and as a domain analysis tool; (b) To improve maintainability by recording design rationales from two perspectives - problem domain and solution domain; (c) To evaluate the software architecture. 2) We have defined a new architectural language called HADL or HUMS Architectural Definition Language. It is a customized version of xArch/xADL. It is based on XML and, hence, is easily portable from domain to domain, application to application, and machine to machine. Specifications written in HADL can be easily read and parsed using the currently available XML parsers. Thus, there is no need to develop a plethora of software to support HADL. 3) We have developed an automated design process that involves two main techniques: (a) Selection of solutions from a large space of designs; (b) Synthesis of designs. However, the automation process is not an absolute Artificial Intelligence (AI) approach though it uses a knowledge-based system that epitomizes a specific HUMS domain. The process uses a database of solutions as an aid to solve the problems rather than creating a new design in the literal sense. Since searching is adopted as the main technique, the challenges involved are: (a) To minimize the effort in searching the database where a very large number of possibilities exist; (b) To develop representations that could conveniently allow us to depict design knowledge evolved over many years; (c) To capture the required information that aid the

Case Study of Lessons Learned from the Operation of the Fast Flux Test Facility

International Nuclear Information System (INIS)

Wootan, D.; Omberg, R.; Grandy, C.

2016-01-01

Full text: The lessons learned approach being followed at the Fast Flux Test Facility is to have domain experts in each subject area develop a short write-up or report on each lesson learned. Each lesson learned write-up is on the order of 4–6 pages. Longer reports can be developed as needed. Each lessons learned summary discusses the problem and the resolution method employed to address the problem, and also tries to capture the essential “tacit knowledge” associated with each topic in a focused manner. All lessons learned write-ups are supported by more detailed documents. For example, references of more detailed reports are generally included, where available. Topics are selected as those most likely to apply to future design or operating problems. This lessons learned approach has been successful in capturing essential tacit knowledge about key events in FFTF history and providing a context for interpreting the existing data and references. (author

Message in a Bottle: Basic Business Lessons for Entrepreneurs Using Only a Soft Drink

Science.gov (United States)

McCormick, Blaine; Gray, Van

2011-01-01

Coca-Cola is available in more than 200 countries and territories. As such, it stands as a readily available resource for teaching business lessons in developing countries. This article presents the use of a bottle of Coke to teach 12 basic business lessons. Designed for minimally educated entrepreneurs starting or running microenterprises, each…

Development of concept-based physiology lessons for biomedical engineering undergraduate students.

Science.gov (United States)

Nelson, Regina K; Chesler, Naomi C; Strang, Kevin T

2013-06-01

Physiology is a core requirement in the undergraduate biomedical engineering curriculum. In one or two introductory physiology courses, engineering students must learn physiology sufficiently to support learning in their subsequent engineering courses and careers. As preparation for future learning, physiology instruction centered on concepts may help engineering students to further develop their physiology and biomedical engineering knowledge. Following the Backward Design instructional model, a series of seven concept-based lessons was developed for undergraduate engineering students. These online lessons were created as prerequisite physiology training to prepare students to engage in a collaborative engineering challenge activity. This work is presented as an example of how to convert standard, organ system-based physiology content into concept-based content lessons.

PENGEMBANGAN MODEL PEMBINAAN KOMPETENSI CALON GURU MATEMATIKA MELALUI LESSON STUDY

Directory of Open Access Journals (Sweden)

Rahmad Bustanul Anwar

2014-06-01

Full Text Available Education has a very important role in improving the quality of human resources. Therefore, education is expected to be one of the ways to prepare generations of qualified human resources and has the ability to deal with the progress of time and technology development . In order to enhance the quality of student mastery of competencies in the development of prospective teachers in this study will be applied to the activities in the process of lesson study in lecture . Lesson study is a model of coaching to people who work as both teacher educators and lecturers through collaborative learning and assessment in building sustainable learning communities. The purpose of this research is to improve the competence of prospective mathematics teachers through lesson study . More specifically , this study aims to describe the efforts made to improve the pedagogical, professional competence , social competence and personal competence prospective mathematics teachers through lesson study . Subjects in this study were students who took the micro teaching courses totaling 15 students , divided into 3 group . This type of research is a qualitative descriptive study is to develop the competence of prospective mathematics teachers through lesson study . Lesson study conducted collaborated with Action Research activities ( Action Reseach. The results of this research activity is the implementation of lesson study to greater competence to prospective teachers teaching mathematics through the micro subjects namely: pedagogical competence categories were 80 % and 20 % lower, professional competence categories were 46.7 % and 53.3 % lower, personal competence 100 % category being and social competence categories were 86.7 % and 13.3 % lower .

Bottom-up design of a gas futures market in East Asia: Lessons from the Dojima rice exchange

Directory of Open Access Journals (Sweden)

Xunpeng Shi

2016-10-01

Full Text Available The natural gas market in East Asia remains fragmented without a functioning benchmark price to duly reflect the dynamics of demand and supply forces in the region. A functional regional gas futures market, which is highly dependent on the presence of well-developed physical spot trading, is yet to be established. Since the intra-regional pipeline connection is largely non-existent in East Asia, it is the LNG spot cargo trading that is likely to become the basis for the regional gas futures market. This paper offers a novel approach to understanding the development of such a market by analyzing the experience of a different commodity market – the Dojima Rice Exchange (DRE – and identifying potentially transferrable lessons in the market design and the role of government regulations. Based on the case study analysis, implications for the development of natural gas trading hubs in East Asia are offered and an LNG futures exchange design is put forward.

Lessons learned from standardized plant design and construction

International Nuclear Information System (INIS)

Roche, B.

1999-01-01

Following France's hydropower program, Electricite de France began producing electricity with nuclear power during the 60s with units that were all different. In the early 70s, EDF launched an extensive nuclear program which was fueled by the 1973 oil crisis. The particularity of this program is based on the standardization of the design which enables the cost of engineering studies, components and construction to be reduced. As all of the sites presented various conditions, a single design was possible except for the heat sink, connection to the grid and foundations. In order to follow technical progress, the program was divided into several homogeneous series: CP0, CP1 and CP2 for 900 MWe reactors, P4 and P'4 for 1300 MWe reactors and N4 for 1450 MWe reactors. EDF has managed to apply standardization throughout the service life of the plant: all units of the same series are modified in the same manner and with a same batch of modifications. The standardization of operations is also the EDF's rule: technical specifications, safety reports, and safety procedures are normally the same for units belonging to the same series. Nevertheless, when plant design and operations, and heavy maintenance are considered, it becomes increasingly difficult to maintain strict standardization across the board: when examined closely, variations are possible-as regards the chemical specifications of the secondary system, for instance. On the other hand, at the fabrication stage, it is difficult to maintain fabrication procedures and alloy compositions rigorously the same. Standardization offers a tremendous advantage representing 30-40% of construction costs. The main drawback is the risk of generic defects. On the other hand, the risk is rather small owing to the small differences among units. (author)

HCI Lessons From PlayStation VR

OpenAIRE

Habgood, Jacob; Wilson, David; Moore, David; Alapont, Sergio

2017-01-01

PlayStation VR has quickly built up a significant user-base of over a million headsets and its own ecosystem of games across a variety of genres. These games form part of a rapidly evolving testing ground for design solutions which can usefully inform HCI design for virtual reality. This paper reviews every PlayStation VR title released in the first three months of its lifecycle in order to identify emerging themes for locomotion. These themes are discussed with respect to the lessons learned...

Values Education in Ottoman Empire in the Second Constitutional Period: A Sample Lesson

Science.gov (United States)

Oruc, Sahin; Ilhan, Genc Osman

2015-01-01

Values education holds a significant place in an education environment and many studies are carried out about this new subject area. The aim of this study is to define how the subject of "values education" is handled in a sample lesson designed in the period of Constitution II in the Ottoman Empire. In this study, the lesson plan in the…

Design, Qualification and Lessons Learned of the Shutter Calibration Mechanism for EnMAP Mission

Science.gov (United States)

Schmidt, Tilo; Muller, Silvio; Bergander, Arvid; Zajac, Kai; Seifart, Klaus

2015-09-01

The Shutter Calibration Mechanism (SCM) Assembly is one of three mechanisms which are developed by HTS for the EnMAP instrument in subcontract to OHB System AG Munich. EnMAP is the Environmental Mapping and Analysis Program of the German Space Agency DLR.The binary rotary encoder of the SCM using hall-effect sensors was already presented during ESMATS 2011. This paper summarizes the main functions and design features of the Hardware and focuses on qualification testing which has finished successfully in 2014. Of particular interest is the functional testing of the main drive including the precise hall-effect position sensing system and the test of the fail safe mechanism. In addition to standard test campaign required for QM also a shock emission measurement of the fail safe mechanism activation was conducted.Test conduction and results will be presented with focus on deviations from the expected behaviour, mitigation measures and on lessons learned.

Refining MARGINS Mini-Lessons Using Classroom Observations

Science.gov (United States)

Iverson, E. A.; Manduca, C. A.; McDaris, J. R.; Lee, S.

2009-12-01

process instructive. Activity authors found the observations very helpful and the first mini-lessons have now been revised using feedback from testers. Initial results show that the tested mini-lessons give students hands-on experience with scientific data and help students make connections between geologic phenomena and data. Productive feedback ranged from suggestions for improving activity design, adaptations for other audiences, suggestions for clearer presentation, and tips for using the materials. The team plans to broaden the use of the protocol to test and refine all of the mini-lessons in the MARGINS collection.

SRS SLUDGE BATCH QUALIFICATION AND PROCESSING; HISTORICAL PERSPECTIVE AND LESSONS LEARNED

Energy Technology Data Exchange (ETDEWEB)

Cercy, M.; Peeler, D.; Stone, M.

2013-09-25

This report provides a historical overview and lessons learned associated with the SRS sludge batch (SB) qualification and processing programs. The report covers the framework of the requirements for waste form acceptance, the DWPF Glass Product Control Program (GPCP), waste feed acceptance, examples of how the program complies with the specifications, an overview of the Startup Program, and a summary of continuous improvements and lessons learned. The report includes a bibliography of previous reports and briefings on the topic.

Formative assessment in teacher talk during lesson studies

NARCIS (Netherlands)

van Halem, Nicolette; Goei, Sui Lin; Akkerman, Sanne F.

2016-01-01

Purpose: The purpose of this paper is to evaluate the extent of systematic examination of students’ educational (support) needs by teachers participating in lesson study (LS) meetings within a framework of formative assessment (FA). Design/methodology/approach: The study took place in the context of

Transit safety retrofit package development : architecture and design specifications.

Science.gov (United States)

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical : objectives stated in the TRP requirements document. : The document begins with an architectural overview that identifies and descr...

Research overview : design specifications for hybrid vehicles

NARCIS (Netherlands)

Hofman, T.; Druten, van R.M.

2004-01-01

In this paper a method is proposed for determination of the design specifications regarding the energy exchange systems for different chargesustaining hybrid vehicles of different vehicle classes. Hybrid drivetrains for vehicles combine multiple power sources in order to increase the driving

Functional requirements of cellular differentiation: lessons from Bacillus subtilis.

Science.gov (United States)

Narula, Jatin; Fujita, Masaya; Igoshin, Oleg A

2016-12-01

Successful execution of differentiation programs requires cells to assess multitudes of internal and external cues and respond with appropriate gene expression programs. Here, we review how Bacillus subtilis sporulation network deals with these tasks focusing on the lessons generalizable to other systems. With feedforward loops controlling both production and activation of downstream transcriptional regulators, cells achieve ultrasensitive threshold-like responses. The arrangement of sporulation network genes on the chromosome and transcriptional feedback loops allow coordination of sporulation decision with DNA-replication. Furthermore, to assess the starvation conditions without sensing specific metabolites, cells respond to changes in their growth rates with increased activity of sporulation master regulator. These design features of the sporulation network enable cells to robustly decide between vegetative growth and sporulation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Criticality Safety Lessons Learned in a Deactivation and Decommissioning Environment [A Guide for Facility and Project Managers

Energy Technology Data Exchange (ETDEWEB)

Nirider, L. Tom

2003-08-06

This document was designed as a reference and a primer for facility and project managers responsible for Deactivation and Decommissioning (D&D) processes in facilities containing significant inventories of fissionable materials. The document contains lessons learned and guidance for the development and management of criticality safety programs. It also contains information gleaned from occurrence reports, assessment reports, facility operations and management, NDA program reviews, criticality safety experts, and criticality safety evaluations. This information is designed to assist in the planning process and operational activities. Sufficient details are provided to allow the reader to understand the events, the lessons learned, and how to apply the information to present or planned D&D processes. Information is also provided on general lessons learned including criticality safety evaluations and criticality safety program requirements during D&D activities. The document also explores recent and past criticality accidents in operating facilities, and it extracts lessons learned pertinent to D&D activities. A reference section is included to provide additional information. This document does not address D&D lessons learned that are not pertinent to criticality safety.

Experience with chemicals regulation - Lessons from the Danish LAS case

DEFF Research Database (Denmark)

Lauridsen, Pia Vestergaard; Røpke, Inge

2006-01-01

the understanding of how chemicals regulation is being shaped through social and political processes, and which lessons can be drawn regarding the effectiveness of different regulatory measures. We outline briefly the history of the chemicals regulation as a background for the detailed discussion of the case study......Chemicals regulation is under pressure for change, and lessons from former experience are important to inform the process. This paper is based on a case study of the Danish measures towards regulating a specific substance, Linear Alkylbenzene Sulphonate (LAS), and the case is used to deepen...

The Employed Neurosurgeon: Essential Lessons.

Science.gov (United States)

Benzil, Deborah L; Zusman, Edie E

2017-04-01

Neurosurgeons are highly specialized surgeons whose pride is mastery of the complexity of form and function that is the nervous system and then knowing when and how these require surgical intervention. Following years of arduous postgraduate education, neurosurgeons enter the world of practice that is not only daunting in its intricacies of regulations, mandates, and unknown business practices, but also changing at a meteoric pace. Overwhelmingly, graduating residents and fellows are choosing to practice as employed physicians, a trend that is new in its magnitude and also changed because of the rapid evolution of large health systems. Case studies of challenges other employed surgical specialists have faced can provide critical and important education for any neurosurgeon in this arena. As with the lessons of all case studies, the teachings are remarkably universal, but how those lessons apply to an individual's specific situation will require personalized adaptation. Copyright © 2016 by the Congress of Neurological Surgeons.

Specification and Design of Electrical Flight System Architectures with SysML

Science.gov (United States)

McKelvin, Mark L., Jr.; Jimenez, Alejandro

2012-01-01

Modern space flight systems are required to perform more complex functions than previous generations to support space missions. This demand is driving the trend to deploy more electronics to realize system functionality. The traditional approach for the specification, design, and deployment of electrical system architectures in space flight systems includes the use of informal definitions and descriptions that are often embedded within loosely coupled but highly interdependent design documents. Traditional methods become inefficient to cope with increasing system complexity, evolving requirements, and the ability to meet project budget and time constraints. Thus, there is a need for more rigorous methods to capture the relevant information about the electrical system architecture as the design evolves. In this work, we propose a model-centric approach to support the specification and design of electrical flight system architectures using the System Modeling Language (SysML). In our approach, we develop a domain specific language for specifying electrical system architectures, and we propose a design flow for the specification and design of electrical interfaces. Our approach is applied to a practical flight system.

Knowledge into action: Some lessons from the histories of hazards

DEFF Research Database (Denmark)

Hansen, Steffen Foss; Gee, D.

fuels and nuclear power provide lessons for prudent actions on the potential hazards of emerging technologies such as from nanotechnology, GMO food, radio-frequency from mobile phones, and the new generation of nuclear plants (See “Late Lessons from Early Warnings” volume I and II from the European...... and engagement of the public. In this paper, we analyse these latter barriers to getting knowledge into action and illustrate some ways and means by which science and precautionary measures, including regulations, market based instruments, and increased awareness and engagement of the public, could be designed...

Serbian SNF Repatriation Operation. Issues, Solving, Lesson

Energy Technology Data Exchange (ETDEWEB)

Smirnov, A. [Research and Development Company ' Sosny' , Moscow (Russian Federation)

2011-07-01

For now the removal of SNF from RA reactor site (PC NFS, Serbia) is the most time-consuming and technically complicated operation under RRRFR Program. The most efficient techniques and lessons learned from other projects of the RRRFR Program as well as new unique technical decisions were used. Two big challenges were resolved during implementation of Serbian Project: (1) preparation of damaged fuel located in the packages unsuitable for transport, taking into account insufficient infrastructure of RA reactor site and (2) removal of large amount of fuel in one multimodal shipment through several transit countries. The main attention was paid to safety justification of all activities. All approvals were obtained in Russia, Serbia and transit countries. Special canisters were designed for transportation of specific RA reactor fuel (of small dimensions, unidentifiable, damaged due to corrosion). The canister design was selected to be untight - it was the most expedient decision for that case from safety perspective. The technology and a set of equipment were designed for remote removal of the fuel from the existing package (aluminum barrels and reactor channels) and placing of the fuel into the new canisters. After fabrication and assembling of the equipment theoretical and practical training of the personnel was performed. Fuel repackaging took about 5 months. SNF was transported in TUK-19 and SKODA VPVR/M casks. The baskets of large capacity were designed and fabricated for SKODA VPVR/M casks. Special requirements to drying the packages and composition of gaseous medium inside were justified to ensure fire and explosion safety. Specialized ISO-containers and transfer equipment designed under Romanian Project were used together with TUK-19 casks. A forklift and mobile rail system were used to handle SKODA VPVR/M casks under conditions of low capacity of the cranes at the facility. Due to the tight schedule of RRRFR Program as well as geographical peculiarities of RA

A Strategy for Material-specific e-Textile Interaction Design

DEFF Research Database (Denmark)

Gowrishankar, Ramyah; Bredies, Katharina; Ylirisku, Salu

2017-01-01

The interaction design of e-Textile products are often characterized by conventions adopted from electronic devices rather than developing interactions that can be specific to e-Textiles. We argue that textile materials feature a vast potential for the design of novel digital interactions....... Especially the shape-reformation capabilities of textiles may inform the design of expressive and aesthetically rewarding applications. In this chapter, we propose ways in which the textileness of e-Textiles can be better harnessed. We outline an e-Textile Interaction Design strategy that is based...... on defining the material-specificity of e-Textiles as its ability to deform in ways that match the expectations we have of textile materials. It embraces an open-ended exploration of textile-related interactions (for e.g. stretching, folding, turning-inside-out etc.) and their potential for electronic...

Consideration of a Learning Programming Process based on Software Design for Beginners

OpenAIRE

大村, 基将; 紅林, 秀治

2016-01-01

We considered a learning programming process based on software design for technology education. Lessons of computer program-aided measurement and control are for beginners to learn programming. These lessons are efficient to learn the step of programming, but the main of the lessons are works of typing the sample programming and debugging. Therefore, these lessons have a fundamental lack of the concept of design. Then we considered learning processes of programming and applied the process of ...

Advances in global development and deployment of small modular reactors and incorporating lessons learned from the Fukushima Daiichi accident into the designs of engineered safety features of advanced reactors

International Nuclear Information System (INIS)

Hadid Subki, M.; )

2014-01-01

The IAEA has been facilitating the Member States in incorporating the lessons-learned from the Fukushima Dai-ichi Accident into the designs of engineered safety features of advanced reactors, including small modular reactors. An extended assessment is required to address challenges for advancing reactor safety in the new evolving generation of SMR plants to preserve the historic lessons in safety, through: assuring the diversity in emergency core cooling systems following loss of onsite AC power; ensuring diversity in reactor depressurization following a transient or accident; confirming independence in reactor trip and safety systems for sensors, power supplies and actuation systems, and finally diversity in maintaining containment integrity following a severe accident

A Lesson about the Circular Flow. Active Learning Lessons. Economics International.

Science.gov (United States)

Landfried, Janet

This lesson plan was developed through "Economics International," an international program to help build economic education infrastructures in the emerging market economies. It provides a lesson description; appropriate grade level; economic concepts; content standards and benchmarks; related subjects; instructional objectives; time…

13th Forum for Specification and Design Languages (FDL) conference

CERN Document Server

Morawiec, Adam; System Specification and Design Languages : Selected Contributions from FDL 2010

2012-01-01

This book brings together a selection of the best papers from the thirteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in Southampton, UK in September 2010.  FDL is a well established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modelling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers design verification, automatic synthesis and mechanized debug aids; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven E...

Classroom Management and Lesson Planning(4)

Institute of Scientific and Technical Information of China (English)

2006-01-01

Lesson PlanningTask 1As teachers,we all need to plan our lessons before we teach.Make a list of things that you think need tobe included in a lesson plan.Then compare and discuss your list with another teacher.Also think about reasonswhy we need to plan our lessons.

Patient and Stakeholder Engagement in the PCORI Pilot Projects: Description and Lessons Learned.

Science.gov (United States)

Forsythe, Laura P; Ellis, Lauren E; Edmundson, Lauren; Sabharwal, Raj; Rein, Alison; Konopka, Kristen; Frank, Lori

2016-01-01

Patients and healthcare stakeholders are increasingly becoming engaged in the planning and conduct of biomedical research. However, limited research characterizes this process or its impact. We aimed to characterize patient and stakeholder engagement in the 50 Pilot Projects funded by the Patient-Centered Outcomes Research Institute (PCORI), and identify early contributions and lessons learned. A self-report instrument was completed by researchers between 6 and 12 months following project initiation. Forty-seven principal investigators or their designees (94 % response rate) participated in the study. MAIN MEASURES Self-report of types of stakeholders engaged, stages and levels of engagement, facilitators and barriers to engagement, lessons learned, and contributions from engagement were measured. Most (83 %) reported engaging more than one stakeholder in their project. Among those, the most commonly reported groups were patients (90 %), clinicians (87 %), health system representatives (44 %), caregivers (41 %), and advocacy organizations (41 %). Stakeholders were commonly involved in topic solicitation, question development, study design, and data collection. Many projects engaged stakeholders in data analysis, results interpretation, and dissemination. Commonly reported contributions included changes to project methods, outcomes or goals; improvement of measurement tools; and interpretation of qualitative data. Investigators often identified communication and shared leadership strategies as "critically important" facilitators (53 and 44 % respectively); lack of stakeholder time was the most commonly reported challenge (46 %). Most challenges were only partially resolved. Early lessons learned included the importance of continuous and genuine partnerships, strategic selection of stakeholders, and accommodation of stakeholders' practical needs. PCORI Pilot Projects investigators report engaging a variety of stakeholders across many stages of research, with specific

Moderate-to-vigorous physically active academic lessons and academic engagement in children with and without a social disadvantage: a within subject experimental design.

Science.gov (United States)

Mullender-Wijnsma, Marijke J; Hartman, Esther; de Greeff, Johannes W; Bosker, Roel J; Doolaard, Simone; Visscher, Chris

2015-04-19

Integration of physical active academic lessons in the school curriculum may be an innovative way to improve academic outcomes. This study examined the effect of physically active academic lessons (Fit en Vaardig op school) on academic engagement of socially disadvantaged children and children without this disadvantage. In addition, the relationship between lesson time spent in moderate to vigorous physical activity and academic engagement was examined. From four elementary schools, 86 children who participated in the 22-weeks intervention were recruited (23 socially disadvantaged children). Academic engagement was determined by observing time-on-task during three classroom observation moments (start, midway and end observation). Every moment consisted of lesson observations after intervention lessons (post-intervention) and after regular classroom lessons (post-control). Differences in time-on-task between socially disadvantaged children and children without this disadvantage were analyzed using independent samples t-test. Differences between post-intervention and post-control observations were analyzed using multilevel analysis. Heart rate monitors measured the lesson time spent in moderate to vigorous physical activity. The relationship between percentage of moderate to vigorous physical activity during the intervention lessons and time-on-task was analyzed by calculation of partial correlations. Time-on-task of socially disadvantaged children was lower than that of children without this disadvantage, differences were significant at the start post-control (t(65) = 2.39, p < 0.05) and post-intervention (t(71) = 2.75, p < 0.05) observation and at the midway post-control (t(68) = 2.45, p < 0.05) observation. Multilevel analysis showed that the time-on-task of all children was significantly higher during post-intervention in comparison with post-control lessons (ES = 0.41). No significant difference was found at the start observation, but

Classroom Management and Lesson Planning(4)

Institute of Scientific and Technical Information of China (English)

2006-01-01

@@ Lesson Planning Task 1 As teachers,we all need to plan our lessons before we teach.Make a list of things that you think need to be included in a lesson plan.Then compare and discuss your list with another teacher.Also think about reasons why we need to plan our lessons.

Lesson Planning the Kodaly Way.

Science.gov (United States)

Boshkoff, Ruth

1991-01-01

Discusses the contribution of Zoltan Kodaly to music lesson planning. Emphasizes preparation, presentation, and practice as the three important strategies in teaching concepts and skills to be included in a lesson plan. Includes a sample lesson plan covering a semester and advice on choosing song material. (DK)

Rainstorm Activities for Early Childhood Music Lessons Inspired by Teachable Moments

Science.gov (United States)

Poole, Harrison Grant

2016-01-01

Activities that focus on already familiar concepts are good starting points when designing early childhood music lessons. The author uses teachable moments, a spider in the classroom and a rainstorm, to design interdisciplinary preschool group activities that teach music, math, and science concepts. Dynamics and tempo are the music concepts that…

Remote Systems Design & Deployment

Energy Technology Data Exchange (ETDEWEB)

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

The effectiveness of Concept Mapping Content Representation Lesson Study (ComCoReLS) model to improve skills of Creating Physics Lesson Plan (CPLP) for pre-service physics teacher

Science.gov (United States)

Purwaningsih, E.; Suyatno; Wasis; Prahani, B. K.

2018-03-01

This research is aimed to analyse the effectiveness of ComCoReLS (Concept Mapping Content Representation Lesson Study) model towards the improvement skills of Creating Physics Lesson Plan (CPLP) for pre-service physics teacher. This research used one group pre-test and post-test design on 12 pre-service physics teacher at University of Malang State (Indonesia) in academic year 2016/2017. Data collection was conducted through test and interview. Skills of creating physics lesson plan for pre-service physics teacher measurement were conducted through Physics Lesson Plan Evaluation Sheet (PLPES). The data analysis technique was done by using paired t-test and n-gain. The CoMCoReLS model consists of 5 phases, including (1) Preparation, (2) Coaching, (3) Guided Practice, (4) Independent Practice, and (5) Evaluation. In the first, second, third and fifth phases are done at University of Malang State, while the fourth phase (Independent Practice) is done in SMAN 1 Singosari, SMAN 2 Malang, SMA Lab UM, MAN 3 Malang. The results showed that there was a significant increase in skills of creating physics lesson plan for pre-service physics teacher at α = 5% and n-gain average of high category. Thus, the ComCoReLS model is effective for improving skills of creating physics lesson plan for pre-service physics teacher.

TMI-2 lessons have been learned

International Nuclear Information System (INIS)

Long, R.L.

1994-01-01

This paper is an introduction to the more detailed papers which are presented in this session titled ''Advanced Light Water Reactors -- 15 Years After TMI.'' Many of the advances in the design, operation and maintenance of nuclear power plants are the direct result of applying lessons learned from the 1979 TMI-2 accident. The authors believe the ''reality awakening'' which occurred following the accident should never be forgotten. Thus, this paper briefly reviews the TMI-2 accident and identifies the broad lessons learned following the accident. Then it describes briefly some indicators which show the very impressive improvements in nuclear power plant performance that have occurred over the past 10-15 years. This sets the stage for Dr. Ransom's paper which shows the continuing need for nuclear power, Dr. Beckjord's paper which describes the ''final'' TMI-2 research project and the subsequent papers which focus on advanced light water reactor developments

Examining the Interactions between Mathematical Content and Pedagogical Form: Notes on the Structure of the Lesson

Science.gov (United States)

Karp, Alexander

2004-01-01

Research conducted during the Trends in International Mathematics and Science Study (TIMSS) and later (Stigler et al. 1999; Stigler and Hiebert 1999) undertook a thorough analysis of lessons in the United States, Japan, and Germany. This article focuses on certain aspects of mathematics lessons in Russia. Specifically, the attempt is made to…

Lessons learned while implementing a safety parameter display system at the Comanche Peak steam electric station

International Nuclear Information System (INIS)

Hagar, B.

1987-01-01

With the completion of site Verification and Validation tests, the Safety Parameter Display System (SPDS) will be fully operational at the Comanche Peak Steam Electric Station. Implementation of the SPDS, which began in 1982, included: modifying generic Safety Assessment System Software; developing site-specific displays and features; installing and integrating system equipment into the plant; modifying station heating, ventilation, and air conditioning systems to provide necessary cooling; installing an additional uninterruptible power supply system to provide necessary power; and training station personnel in the operation and use of the system. Lessons learned during this project can be discussed in terms of an ideal SPDS implementation project. Such a project would design and implement an SPDS for a plant that is already under construction or operating, and would progress through a sequence of activities that includes: (1) developing and documenting the system design bases, and including all major design influences; (2) developing a database description and system functional specifications to clarify specific system requirements; (3) developing detailed system hardware and software design specifications to fully describe the system, and to enable identification of necessary site design changes early in the project; (4) implementing the system design; (5) configuring and extensively testing the system prior to routine system operation; and (6) tuning the system after the completion of system installation. The ideal project would include future system users in design development and system testing, and would use Verification and Validation techniques throughout the project to ensure that each sequential step is appropriate and correct

PENINGKATAN KOMPETENSI PEDAGOGIK GURU DAN KEMAMPUAN AKADEMIK SISWA MELALUI LESSON STUDY

Directory of Open Access Journals (Sweden)

Eka Andriani

2016-11-01

Full Text Available This study aims to improve teachers' pedagogical competence and academic achievement of students through lesson study based learning. The design of this study is classroom action research method of observation and written tests. The data were analyzed by quantitative descriptive. The research was conducted on a geography teacher and students of class XI social science programe specialization courses in high school. The results showed an increase pedagogical competence of teachers of the first cycle to the second cycle. This can be seen from the ability of teachers prepare lesson plans and implementing learning. Based learning lesson study also impact on improving the academic skills of students in the form of activity and learning outcomes. Penelitian ini bertujuan untuk meningkatkan kompetensi pedagogik guru dan prestasi akademik siswa melalui pembelajaran berbasis lesson study. Rancangan penelitian ini adalah penelitian tindakan kelas dengan metode observasi dan tes tertulis. Data dianalisis secara deskriptif kuantitatif. Penelitian ini dilakukan pada guru Geografi dan siswa kelas XI program peminatan ilmu sosial di SMA. Hasil penelitian menunjukkan adanya peningkatan kompetensi pedagogik guru dari siklus I ke siklus II. Hal ini bisa dilihat dari kemampuan guru menyusun RPP dan melaksanakan pembelajaran. Pembelajaran berbasis lesson study juga berdampak pada peningkatan kemampuan akademis siswa berupa aktivitas dan hasil belajar.

Criticality Safety Lessons Learned in a Deactivation and Decommissioning Environment [A Guide for Facility and Project Managers

International Nuclear Information System (INIS)

NIRIDER, L.T.

2003-01-01

This document was designed as a reference and a primer for facility and project managers responsible for Deactivation and Decommissioning (D and D) processes in facilities containing significant inventories of fissionable materials. The document contains lessons learned and guidance for the development and management of criticality safety programs. It also contains information gleaned from occurrence reports, assessment reports, facility operations and management, NDA program reviews, criticality safety experts, and criticality safety evaluations. This information is designed to assist in the planning process and operational activities. Sufficient details are provided to allow the reader to understand the events, the lessons learned, and how to apply the information to present or planned D and D processes. Information is also provided on general lessons learned including criticality safety evaluations and criticality safety program requirements during D and D activities. The document also explores recent and past criticality accidents in operating facilities, and it extracts lessons learned pertinent to D and D activities. A reference section is included to provide additional information. This document does not address D and D lessons learned that are not pertinent to criticality safety

With Interest It Comes To...Unconscionable Clauses in Sales Contracts. A Student's Lesson Plan [and] A Teacher's Lesson Plan [and] A Lawyer's Lesson Plan.

Science.gov (United States)

Howard, Estelle; And Others

One of a series of secondary level teaching units presenting case studies with pro and con analysis of particular legal problems, the document presents a student's lesson plan, a teacher's lesson plan, and a lawyer's lesson plan on unconscionable clauses in sales contracts. The unit acquaints students with the operation of sales contracts and…

Lessons learned from the tokamak Advanced Reactor Innovation and Evaluation Study (ARIES)

International Nuclear Information System (INIS)

Krakowski, R.A.; Bathke, C.G.; Miller, R.L.; Werley, K.A.

1994-01-01

Lessons from the four-year ARIES (Advanced Reactor Innovation and Evaluation Study) investigation of a number of commercial magnetic-fusion-energy (MFE) power-plant embodiments of the tokamak are summarized. These lessons apply to physics, engineering and technology, and environmental, safety, and health (ES ampersand H) characteristics of projected tokamak power plants. Summarized herein are the composite conclusions and lessons developed in the course of four conceptual tokamak power-plant designs. A general conclusion from this extensive investigation of the commercial potential of tokamak power plants is the need for combined, symbiotic advances in both physics, engineering, and materials before economic competitiveness with developing advanced energy sources can be realized. Advances in materials are also needed for the exploitation of environmental advantages otherwise inherent in fusion power

Lessons learned related to packaging and transportation

International Nuclear Information System (INIS)

Wallen, C.

1995-01-01

The use of lessons learned as a tool for learning from past experiences is well established, especially by many organizations within the nuclear industry. Every person has, at some time, used the principles of lessons learned to adopt good work practices based on their own experiences or the experiences of others. Lessons learned can also help to avoid the recurrence of adverse practices, which is often an area that most lessons-learned programs tend to focus on. This paper will discuss how lessons learned relate to packaging and transportation issues and events experienced at Department of Energy (DOE) facilities. It will also discuss the role performed by the Office of Nuclear and Facility Safety's Office of Operating Experience Analysis and Feedback in disseminating lessons learned and operating experience feedback to the DOE complex. The central concept of lessons learned is that any organization should be able to learn from its own experiences and events. In addition, organizations should implement methodologies to scan external environments for lessons learned, to analyze and determine the relevance of lessons learned, and to bring about the necessary changes learned from these experiences. With increased concerns toward facility safety, the importance of utilizing the lessons-learned principles and the establishment of lessons-learned programs can not be overstated

Working in the Cafe: Lessons in Group Dialogue

Science.gov (United States)

Prewitt, Vana

2011-01-01

Purpose: The aim of this paper is to report on findings related to the use of a large group intervention method known as The World Cafe. Design/methodology/approach: The intervention method and its philosophical genesis are described along with lessons learned from observation, personal use, and interviews with cafe participants. Findings: While…

[Heritage Education Lesson Plans and Slide Presentations].

Science.gov (United States)

Van Buren, Maurie

Field tested in 27 schools and in grades four through twelve, this teaching unit stresses heritage education through the study of southern U.S. architectural styles for homes from the pioneer log structures to the 1950s ranch home. Each of the four lessons in this unit focuses around a slide presentation of 20 slides designed to fit into one…

Use of Automated Testing to Facilitate Affordable Design of Military Systems

Science.gov (United States)

2015-04-30

momentum across the Navy and DoD. This initiative is no new big bang /silver bullet; it simply focuses on lowering the cost and risk of government...University of Minnesota. He has developed several specification languages, software tools for computer-aided software design, and fundamental theory ...review of lessons learned and recommendations for further enhancements are discussed. Overview: The Testing Challenge Infinity Is a Big Place The

Adobe InDesign CS6 digital classroom

CERN Document Server

Smith, Christopher

2012-01-01

Expert book-and-video package helps you conquer Adobe InDesign CS6 Whether you want to create sophisticated page layouts for print or electronic books or produce dazzling brochures and other publications, chances are Adobe InDesign is the design and page layout tool you'll call upon. Now you can enhance your creativity and discover all the ways to use Adobe InDesign with this book-and-DVD training package. Thirteen self-paced lessons teach you how to design, produce, and develop streamlined workflows for page layout. Each lesson is accompanied by a video tutorial that clearly demonstrates

The impact of curricula and lesson planning in the teaching process

Directory of Open Access Journals (Sweden)

Majlinda Lika

2017-03-01

Full Text Available Lesson planning is at the core of teaching. It allows teachers to create an orientation path in the process of teaching, taking into consideration, many elements such as, students’ styles of learning, previous knowledge, types of intelligences, interests etc. Effective curricula plans are characterized by principles of coherence, flexibility, integration of knowledge etc. Effective lesson plans strongly rely on previous information gathered through different forms of assessment, and provide inclusive opportunities for every student. This paper will show how planning affects teaching and the quality of learning. First, a review of the literature will represent the importance of flexible planning and incorporation of differentiated elements of planning that ensure inclusive opportunities of learning for all students. Second, there will be a detailed analysis of findings taken by 25 full school inspections practices on the field of “lesson planning”. This part of the study will specify the planning difficulties the teachers face and how this affects the process of teaching and learning. Third, benefits of lesson plans that rely on good assessment practices and integrate differentiated instruction according to students' needs will be discussed as ways of helping teachers adjust lesson plans to overcome their planning difficulties. Findings indicate that teachers design lesson plans that do not rely on good assessment practices. Lesson plans are not flexible enough to respond and satisfy the needs of all categories of students, impacting that way the quality of instruction and learning. The paper will serve teachers to review their planning approaches and integrate elements of differentiated instruction as an organic part of the process, responding to traits and uniqueness students represent.

Lessons from design and manufacture of US LCT coils

International Nuclear Information System (INIS)

Kibbe, R.K.; Haubenreich, P.N.; Gerwig, C.H.; Hackley, D.S.; Sanger, P.A.; Young, J.L.

1981-01-01

In the international Large Coil Task (LCT), US industrial teams have finished one coil and are nearing completion of two others. Of the lessons learned, the ones that apply most widely to advanced technology development have to do with the difficulty of scheduling progress in a novel undertaking. Reasons for schedule stretch-out are discussed in this paper. The major factor in the LCT was the discovery by all participants of more technical problems than could have been foreseen. Also, the effort implicit in the demands for reliability and quality were greater than appreciated at first. Other factors were changes in requirements during the projects and restrictions on effort due to budget constraints. LCT experience should be particularly useful in scheduling development of superconducting coils for tokamak fusion reactors

Lessons from Fukushima for Improving the Safety of Nuclear Reactors

Science.gov (United States)

Lyman, Edwin

2012-02-01

The March 2011 accident at the Fukushima Daiichi nuclear power plant has revealed serious vulnerabilities in the design, operation and regulation of nuclear power plants. While some aspects of the accident were plant- and site-specific, others have implications that are broadly applicable to the current generation of nuclear plants in operation around the world. Although many of the details of the accident progression and public health consequences are still unclear, there are a number of lessons that can already be drawn. The accident demonstrated the need at nuclear plants for robust, highly reliable backup power sources capable of functioning for many days in the event of a complete loss of primary off-site and on-site electrical power. It highlighted the importance of detailed planning for severe accident management that realistically evaluates the capabilities of personnel to carry out mitigation operations under extremely hazardous conditions. It showed how emergency plans rooted in the assumption that only one reactor at a multi-unit site would be likely to experience a crisis fail miserably in the event of an accident affecting multiple reactor units simultaneously. It revealed that alternate water injection following a severe accident could be needed for weeks or months, generating large volumes of contaminated water that must be contained. And it reinforced the grim lesson of Chernobyl: that a nuclear reactor accident could lead to widespread radioactive contamination with profound implications for public health, the economy and the environment. While many nations have re-examined their policies regarding nuclear power safety in the months following the accident, it remains to be seen to what extent the world will take the lessons of Fukushima seriously and make meaningful changes in time to avert another, and potentially even worse, nuclear catastrophe.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Lessons for Teaching Art Criticism.

Science.gov (United States)

Barrett, Terry, Ed.; Clark, Gilbert, Ed.

This collection of lessons is meant to be a practical guide to help teachers engage children in art criticism. The lessons generally follow a similar format. Most suggest an age group but may be modified for use with younger or older students. Several authors suggest variations and extensions for lessons that include studio activities. A broad…

"1984": How Much Fact in Fiction? [Lesson Plan].

Science.gov (United States)

Hedberg, Betsy

Based on George Orwell's novel "1984," this lesson plan presents activities designed to help students understand that the historical context of the novel is based on the mood and political climate of 1949 Europe; the society Orwell created and modern society in the United States have similarities and differences; and modern privacy issues and the…

The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

Science.gov (United States)

Ryan, R. S.

1992-03-01

The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

Science.gov (United States)

Ryan, R. S.

1992-01-01

The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

Human factors engineering in Clinch River Breeder plant design

International Nuclear Information System (INIS)

Planchon, H.P. Jr.; Kaushal, N.N.; Snider, J.

1982-01-01

The Clinch River Breeder Reactor Plant (CRBRP) Project formed a Control Room Task Force to ensure that lessons learned from the Three Mile Island accident are incorporated into the design. The charter for the Control Room Task Force was to review plant operations from the control room. The focus was on the man-machine interface to ensure that the systems' designs and operator actions meshed to properly support plant operation during normal and off-normal conditions. Specific items included for review are described. This paper describes the methodology utilized to accomplish the Task Forces' objectives and the results of the review

Innovation in Deep Space Habitat Interior Design: Lessons Learned From Small Space Design in Terrestrial Architecture

Science.gov (United States)

Simon, Matthew A.; Toups, Larry

2014-01-01

Increased public awareness of carbon footprints, crowding in urban areas, and rising housing costs have spawned a 'small house movement' in the housing industry. Members of this movement desire small, yet highly functional residences which are both affordable and sensitive to consumer comfort standards. In order to create comfortable, minimum-volume interiors, recent advances have been made in furniture design and approaches to interior layout that improve both space utilization and encourage multi-functional design for small homes, apartments, naval, and recreational vehicles. Design efforts in this evolving niche of terrestrial architecture can provide useful insights leading to innovation and efficiency in the design of space habitats for future human space exploration missions. This paper highlights many of the cross-cutting architectural solutions used in small space design which are applicable to the spacecraft interior design problem. Specific solutions discussed include reconfigurable, multi-purpose spaces; collapsible or transformable furniture; multi-purpose accommodations; efficient, space saving appliances; stowable and mobile workstations; and the miniaturization of electronics and computing hardware. For each of these design features, descriptions of how they save interior volume or mitigate other small space issues such as confinement stress or crowding are discussed. Finally, recommendations are provided to provide guidance for future designs and identify potential collaborations with the small spaces design community.

Worldwide Overview of Lessons Learned from Decommissioning Projects

International Nuclear Information System (INIS)

Laraia, Michele

2008-01-01

With an increasing number of radioactive facilities and reactors now reaching the end of their useful life and being taken out of service, there is a growing emphasis worldwide on the safe and efficient decommissioning of such plants. There is a wealth of experience already gained in decommissioning projects for all kinds of nuclear facilities. It is now possible to compare and discuss progress and accomplishments worldwide. In particular, rather than on the factual descriptions of projects, technologies and case histories, it is important to focus on lessons learned: in this way, the return of experience is felt to effectively contribute to progress. Key issues - inevitably based on a subjective ranking - are presented in this paper. Through the exchange of lessons learned, it is possible to achieve full awareness of the need for resources for and constraints of safe and cost-effective decommissioning. What remains now is the identification of specific, remaining issues that may hinder or delay the smooth progress of decommissioning. To this end, lessons learned provide the necessary background information; this paper tries to make extensive use of practical experience gained by the international community

Lesson Exemplars in Electricity and Students’ Epistemological Beliefs

Directory of Open Access Journals (Sweden)

Vergel P. Mirana

2017-10-01

Full Text Available The study evaluated the effects of a developed lesson exemplars in electricity integrating computer simulations and constructivist approach on students' Epistemological Beliefs. Specifically, it sought to determine how computer simulations, constructivist approach and Formativ e Assessment Classroom Technique (FACT can be integrated in the lesson exemplars in electricity; and evaluate the effects of the developed lesson exemplars in the students’ Epistemological Beliefs. The investigation employed the pre - experimental single - gr oup pretest and posttest study using the Epistemological Beliefs Assessment in Physical Sciences (EBAPS questionnaire. The study was conducted among seventy - two (72 Grade 10 students of a laboratory high school from a state university in the Philippines. They were taught using Physics Educational Technology (PhET and other web - based simulations, constructivist approach, and formative assessment classroom technique. The results revealed that the over - all Epistemological Beliefs of the students did not cha nge significantly; only along Nature of Knowing and Learning and Real - Life Applicability. Generally, utilizing computer simulations and applying constructivist approach did not alter students' epistemological beliefs in its entirety. However, it can be en gaging and effective in promoting students’ understanding of Physics.

Lessons learned at Lower East Fork Poplar Creek, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Burch, K.L.; Page, D.G.

1996-01-01

The US Department of Energy (DOE) used several innovative strategies and technologies in conducting the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) activities for the Lower East Fork Poplar Creek (EFPC) Operable Unit (OU) in Oak Ridge, Tennessee. These innovations helped to cost-effectively characterize the 270-ha (670-acre), 23.3-km (14.5-mile) floodplain and to obtain a 400-parts per million (ppm) cleanup level for mercury in soil. Lessons learned during the project involve management, investigation, and risk assessment strategies and techniques. Management lessons learned include (a) how to handle the large OU, (b) how to effectively involve the community in decisions, and (c) how to select a remedy that incorporates the needs of many involved agencies. Investigation lessons learned include (a) how to design an effective sampling strategy for the site, (b) how to cost-effectively analyze a large number of samples, and (c) which of several treatment technologies is best-suited to the site. Risk assessment lessons learned include (a) how to determine an appropriate cleanup level for human health and the environment, (b) how to quantify uncertainty in the human health risk assessment, (c) how to reconcile different solubilities of different mercury species, and (d) how to best conduct the ecological risk assessment. Other CERCLA sites can benefit from lessons learned during this project whether still in the investigative stage or further along in the process. Applying these lessons can substantially reduce costs and make more efficient use of Superfund resources

Application software, domain-specific languages, and language design assistants

OpenAIRE

Heering, Jan

2000-01-01

textabstractWhile application software does the real work, domain-specific languages (DSLs) are tools to help produce it efficiently, and language design assistants in turn are meta-tools to help produce DSLs quickly. DSLs are already in wide use (HTML for web pages, Excel macros for spreadsheet applications, VHDL for hardware design, ...), but many more will be needed for both new as well as existing application domains. Language design assistants to help develop them currently exist only in...

Reactor helium system, design specification, operation and handling

International Nuclear Information System (INIS)

Badrljica, R.

1984-06-01

Apart from detailed design specification of the helium cover gas system of the Ra reactor, this document includes description of the operating regime, instructions for manipulations in the system with the aim of achieving and maintaining stationary gas circulation [sr

Can music lessons increase the performance of preschool children in IQ tests?

Science.gov (United States)

Kaviani, Hossein; Mirbaha, Hilda; Pournaseh, Mehrangiz; Sagan, Olivia

2014-02-01

The impact of music on human cognition has a distinguished history as a research topic in psychology. The focus of the present study was on investigating the effects of music instruction on the cognitive development of preschool children. From a sample of 154 preschool children of Tehran kindergartens, 60 children aged between 5 and 6 were randomly assigned to two groups, one receiving music lessons and the other (matched for sex, age and mother's educational level) not taking part in any music classes. Children were tested before the start of the course of music lessons and at its end with 4 subtests of the Tehran-Stanford-Binet Intelligence Scale (TSB). The experimental group participated in twelve 75-min weekly music lessons. Statistical analysis showed significant IQ increase in participants receiving music lessons, specifically on the TSB verbal reasoning and short-term memory subtests. The numerical and visual/abstract reasoning abilities did not differ for the two groups after lessons. These data support studies that found similar skills enhancements in preschool children, despite vast differences in the setting in which the instruction occurred. These findings appear to be consistent with some neuroimaging and neurological observations which are discussed in the paper.

Use of experience for the improvement of technical specifications for operation

International Nuclear Information System (INIS)

Schweitz, J.P.; Seveon, J.J.

1987-11-01

The lessons drawn from experience led EdF to define in 1980 a national specification standard, to be applied to the first standardized series of 900 MWe units and to be adapted to the later 1300 MWe units. This document is periodically revised, every two years or so, to take into account new trends in safety thinking and lessons learnt from operating experience. In this paper we present the main developments in the field of technical specifications, particularly: the definition of rules applicable in the event of unavailability of safety-related equipment, the integration of plant unit operating feedback for specifications optimization

Late lessons from early warnings: science, precaution, innovation

DEFF Research Database (Denmark)

Hansen, Steffen Foss

2013-01-01

of chemical and technological innovations, and highlight a number of systemic problems. The 'Late Lessons Project' illustrates how damaging and costly the misuse or neglect of the precautionary principle can be, using case studies and a synthesis of the lessons to be learned and applied to maximising...... rather than present specific estimates for these costs. Making the best use of environmental science and modelling helps to make environmental protection and precaution a priority. Producing cost estimates should not be left to economists alone, but should rather be seen as a starting point for a broader...... discussion, featuring also the relevant expertise in health, ecology, demography, modelling and science. Well researched estimates, based on interdisciplinary collaboration, can strengthen some of those scattered and diffuse interests, which during the ordinary processes of policy-making have difficulty...

The future of the IMS Learning Design specification: a critical look

NARCIS (Netherlands)

Sloep, Peter

2009-01-01

P. B. Sloep (2009). The future of the IMS Learning Design specification: a critical look. Presentation at the IMS Learning Design seminar 'The future of IMS Learning Design'. December, 10, 2009, Wollongong, Australia: University of Wollongong.

Design of the real time systems using temporal logic specifications: a case study

Directory of Open Access Journals (Sweden)

A. Ursu

1996-07-01

Full Text Available An implementation method for real time systems is proposed in this article. The implementation starts with the design of the functional specifications of the systems behaviour. The functional specifications are introduced as a set of rules describing the partial time ordering of the actions performed by the system. These rules are then written in terms of temporal logic formulae. The temporal logic formulae are checked using Z.Manna-P.Wolper satisfiability analysis procedure [1]. It is known that this procedure generates a state-graph which can be regarded as a state- based automaton of the system. The sate-based automaton is used then to generate the dual (inverted automaton of the system. The dual automaton is called action-based automaton and can be created using the procedure proposed by authors in [4,5]. Using the action-based automaton of the system the design method introduced in [5,6] is applied to implement the system driver in a systematic manner which can be computerised. The method proposed in this paper is an efficient complementation and generalisation of the results [4,5,6] mentioned above. The method is used for a case study. An elevator control system is designed using the proposed method. The design is carried out in a systematic manner which includes: a design of functional specifications, b design of temporal logic specifications, c satisfiability analysis of temporal logic specifications, d design of the state-based automaton of the specifications, e design of the action-based automaton of the system, f design of the transition activation conditions, g design of the action activation conditions, h design of the functional model of the elevator control system, i implementation of the elevator's actions, j design of the elevator control system driver.

Lessons learned enhancing EPICS CA for LANSCE timed and flavored data

International Nuclear Information System (INIS)

Hill, Jeffrey O.

2009-01-01

A previous paper described an upgrade to EPICS enabling client side tools at LANSCE to receive subscription updates filtered selectively to match a logical configuration of LANSCE beam gates, as configured by the control room. The upgrade required fundamental changes in the EPICS core components. First, the event queue in the EPICS server was upgraded to buffer record (function block) and device specific parameters accessed generically via software interfaces for introspection of 3rd party data. In contrast, event queues in previous versions of EPICS were strictly limited to buffering only value, timestamp, and alarm status tuples. Second, the Channel Access server is being upgraded to filter subscription updates. In this follow on paper some necessary design changes mid-project and the lessons learned during the software development will be described.

Analysis of owner design specifications for snubbers. Report 2

Energy Technology Data Exchange (ETDEWEB)

Butler, J.H.

1977-08-05

The report discusses and evaluates the adequacy of buyer specifications for snubbers. Technical specifications for snubbers (hydraulic and mechanical) were studied in detail in an effort to define the ''fundamental needs'' of the industry with respect to characteristics of snubbers during operation. In the course of this study, it was determined that there is insufficient consensus among users to make such a definition. Authorities in the fields of structural dynamics, structural systems design, and snubber design were also consulted for additional information. Information from these sources is incorporated to identify the fundamental areas of concern, areas where consensus is lacking, and problems to be resolved in order to establish meaningful standards for this equipment.

Analysis of owner design specifications for snubbers. Report 2

International Nuclear Information System (INIS)

Butler, J.H.

1977-01-01

The report discusses and evaluates the adequacy of buyer specifications for snubbers. Technical specifications for snubbers (hydraulic and mechanical) were studied in detail in an effort to define the ''fundamental needs'' of the industry with respect to characteristics of snubbers during operation. In the course of this study, it was determined that there is insufficient consensus among users to make such a definition. Authorities in the fields of structural dynamics, structural systems design, and snubber design were also consulted for additional information. Information from these sources is incorporated to identify the fundamental areas of concern, areas where consensus is lacking, and problems to be resolved in order to establish meaningful standards for this equipment

Control system design specification of advanced spent fuel management process units

Energy Technology Data Exchange (ETDEWEB)

Ahn, S. H.; Kim, S. H.; Yoon, J. S

2003-06-01

In this study, the design specifications of instrumentation and control system for advanced spent fuel management process units are presented. The advanced spent fuel management process consists of several process units such as slitting device, dry pulverizing/mixing device, metallizer, etc. In this study, the control and operation characteristics of the advanced spent fuel management mockup process devices and the process devices developed in 2001 and 2002 are analysed. Also, a integral processing system of the unit process control signals is proposed, which the operation efficiency is improved. And a redundant PLC control system is constructed which the reliability is improved. A control scheme is proposed for the time delayed systems compensating the control performance degradation caused by time delay. The control system design specification is presented for the advanced spent fuel management process units. This design specifications can be effectively used for the detail design of the advanced spent fuel management process.

Lesson study in prospective mathematics teacher education: didactic and paradidactic technology in the post-lesson reflection

DEFF Research Database (Denmark)

Rasmussen, Klaus

2016-01-01

This paper presents a detailed analysis of the post-lesson reflection, carried out in the context of eight cases of lesson study conducted by teams of Danish, lower secondaryprospective teachers and their supervisors. The participants, representing different institutions, were all new to the less...... and concern to the whole profession of mathematics teachers and the analysis adds to our insight into the potential of lesson study in prospective education as a meeting place where pertinent actors contribute to the expansion and dissemination of shared professional knowledge......This paper presents a detailed analysis of the post-lesson reflection, carried out in the context of eight cases of lesson study conducted by teams of Danish, lower secondaryprospective teachers and their supervisors. The participants, representing different institutions, were all new to the lesson...... study format. Nevertheless, it is demonstrated how their interaction shape the development of discourse about mathematical learning. The anthropological theory of the didactic is employed as the theoretical approach to analyse the mathematical and primarily didactical praxeologies developed...

"Split" Character Studies in "Crime and Punishment." [Lesson Plan].

Science.gov (United States)

O'Brien, Mary

Based on Fyodor Dostoevsky's novel "Crime and Punishment," this lesson plan presents activities designed to help students understand that: a close study of the characters of a literary classic will yield important clues to an understanding of the work as a whole; an effective analysis of stylistic devices depends upon selection and interpretation…

Writing Learning Outcomes for English Language Lessons in Multilingual Schools

Science.gov (United States)

Jones, Sally Ann

2016-01-01

This article proposes a pedagogic innovation in teacher education by articulating a method for writing learning outcomes for English language lessons in multilingual school contexts. The argument for this approach is founded on curriculum studies; however, the practice also draws specifically on applied psycholinguistic and sociolinguistic…

Killer "Killer Examples" for Design Patterns

DEFF Research Database (Denmark)

Caspersen, Michael Edelgaard; Alphonce, Carl; Decker, Adrienne

2007-01-01

Giving students an appreciation of the benefits of using design patterns and an ability to use them effectively in developing code presents several interesting pedagogical challenges. This paper discusses pedagogical lessons learned at the "Killer Examples" for Design Patterns and Objects First s...... series of workshops held at the Object Oriented Programming, Systems, Languages and Applications (OOPSLA) conference over the past four years. It also showcases three "killer examples" which can be used to support the teaching of design patterns.......Giving students an appreciation of the benefits of using design patterns and an ability to use them effectively in developing code presents several interesting pedagogical challenges. This paper discusses pedagogical lessons learned at the "Killer Examples" for Design Patterns and Objects First...

Miniature rectenna design

NARCIS (Netherlands)

Visser, Hubregt J.

2017-01-01

For powering small wireless IoT nodes, compact, efficient rectifying antennas have been realized. A first design for 868 and 915 MHz is described. Based on the lessons learned, a new design for 2.45 GHz is realized that is a factor 13 smaller in size.

The German energy transition. Design, implementeation, cost and lessons

Energy Technology Data Exchange (ETDEWEB)

Unnerstall, Thomas

2017-07-01

The book presents a comprehensive and systematic account of the concept, the current status and the costs of the German energy transition: the Energiewende. Written by an insider who has been working in the German energy industry for over 20 years, it follows a strictly non-political, neutral approach and clearly outlines the most relevant facts and figures. In particular, it describes the main impacts of the Energiewende on the German power system and Germany's national economy. Furthermore, it addresses questions that are of global interest with respect to energy transitions, such as the cost to the national economy, the financial burden on private households and companies and the actual effects on CO{sub 2} emissions. The book also discusses what could have been done better in terms of planning and implementing the Energiewende, and identifies important lessons for other countries that are considering a similar energy transition.

The German energy transition. Design, implementeation, cost and lessons

International Nuclear Information System (INIS)

Unnerstall, Thomas

2017-01-01

The book presents a comprehensive and systematic account of the concept, the current status and the costs of the German energy transition: the Energiewende. Written by an insider who has been working in the German energy industry for over 20 years, it follows a strictly non-political, neutral approach and clearly outlines the most relevant facts and figures. In particular, it describes the main impacts of the Energiewende on the German power system and Germany's national economy. Furthermore, it addresses questions that are of global interest with respect to energy transitions, such as the cost to the national economy, the financial burden on private households and companies and the actual effects on CO 2 emissions. The book also discusses what could have been done better in terms of planning and implementing the Energiewende, and identifies important lessons for other countries that are considering a similar energy transition.

Rights of the Accused: Criminal Amendments in the Bill of Rights. A Compilation of Lessons by Minnesota Teachers.

Science.gov (United States)

Bloom, Jennifer, Ed.

The 36 lessons collected in this publication are designed to introduce students to the rights of the accused and provide a scholarly study of these rights, exploring historical development as well as current application. Lessons are provided for all grade levels. The topics covered include the Bill of Rights, criminal rights amendments, juvenile…

Fit-for-purpose land administration : lessons from urban and rural Ethopia

NARCIS (Netherlands)

Bennett, R.M.; Alemie, B.K.

2016-01-01

Lessons for designing fit-for-purpose land administration and land management activities, where the stated purposes are poverty alleviation, food security, and good governance, are provided. Contemporary developments from urban and rural Ethiopia provide the empirical basis: data is synthesised from

Designs of goal-free problems for trigonometry learning

Science.gov (United States)

Retnowati, E.; Maulidya, S. R.

2018-03-01

This paper describes the designs of goal-free problems particularly for trigonometry, which may be considered a difficult topic for high school students.Goal-free problem is an instructional design developed based on a Cognitive load theory (CLT). Within the design, instead of asking students to solve a specific goal of a mathematics problem, the instruction is to solve as many Pythagoras as possible. It was assumed that for novice students, goal-free problems encourage students to pay attention more to the given information and the mathematical principles that can be applied to reveal the unknown variables. Hence, students develop more structured knowledge while solving the goal-free problems. The resulted design may be used in regular mathematics classroom with some adjustment on the difficulty level and the allocated lesson time.

Innovation by design lessons from post box design & development

CERN Document Server

Chakravarthy, Battula Kalyana

2013-01-01

The book provides an in-depth knowledge on how a product is designed and developed by Product Designers. This has been achieved through a case study of one product – the Post Box. This product was chosen for the study primarily due to its simple and non-technical nature as that would make it easy for the readers to comprehend the design process. At the same time the Post Box posed all the challenges a designer would face while creating a new product. Through a step by step process the book gradually takes the reader through the design and development journey – right from understanding the product, identifying the user need through market research, comprehending client’s brief, generating product ideas and concepts to development of prototype, manufacturing and final performance of the product. The book illustrates the stages in the design process that lead to innovation which is applicable to all types of products. To make the book more stimulating, interesting facts, figures and pictures on related iss...

Assessment of Understanding: Student Teachers' Preparation, Implementation and Reflection of a Lesson Plan for Science

Science.gov (United States)

Juhler, Martin Vogt

2017-05-01

Research finds that student teachers often fail to make observable instructional goals, without which a secure bridge between instruction and assessment is precluded. This is one reason that recent reports state that teacher education needs to become better at helping student teachers to develop their thinking about and skills in assessing pupils' learning. Currently in Europe, the Lesson Study method and the Content Representation tool, which both have a specific focus on assessment, have started to address this problem. This article describes and discusses an intervention in which Lesson Study was used in combination with Content Representation in student teachers' field practice. Empirical materials from one group of student teachers were analyzed to illustrate how the student teachers worked with assessment during the planning of a lesson, how they implemented it in a research lesson, and how they used the gathered observations to make claims about assessment aims. The findings suggest that the student teachers placed greater emphasis on assessment through the intervention. However, it is also found that more attention should have been dedicated to the planning phase and that the group did not manage to keep a research focus throughout the Lesson Study process. This suggests that it properly would be beneficial with several planning sessions prior to the research lesson, as well as having an expert teacher leading the Lesson Study.

Preservation and Implementation of Decommissioning Lessons Learned in the United States Nuclear Regulatory Commission

International Nuclear Information System (INIS)

Rodriguez, Rafael L.

2008-01-01

Over the past several years, the United States Nuclear Regulatory Commission (NRC) has actively worked to capture and preserve lessons learned from the decommissioning of nuclear facilities. More recently, NRC has involved industry groups, the Organization of Agreement States (OAS), and the Department of Energy (DOE) in the effort to develop approaches to capture, preserve and disseminate decommissioning lessons learned. This paper discusses the accomplishments of the working group, some lessons learned by the NRC in the recent past, and how NRC will incorporate these lessons learned into its regulatory framework. This should help ensure that the design and operation of current and future nuclear facilities will result in less environmental impact and more efficient decommissioning. In summary, the NRC will continue capturing today's experience in decommissioning so that future facilities can take advantage of lessons learned from today's decommissioning projects. NRC, both individually and collectively with industry groups, OAS, and DOE, is aggressively working on the preservation and implementation of decommissioning lessons learned. The joint effort has helped to ensure the lessons from the whole spectrum of decommissioning facilities (i.e., reactor, fuel cycle, and material facilities) are better understood, thus maximizing the amount of knowledge and best practices obtained from decommissioning activities. Anticipated regulatory activities at the NRC will make sure that the knowledge gained from today's decommissioning projects is preserved and implemented to benefit the nuclear facilities that will decommission in the future

Working Towards Unified Safety Design Criteria for Modular High Temperature Gas-cooled Reactor Designs

International Nuclear Information System (INIS)

Reitsma, Frederik; Silady, Fred; Kunitomi, Kazuhiko

2014-01-01

The Nuclear Power Development Section of the IAEA recently received approval for a Coordinated Research Project (CRP) to investigate and make proposals on modular High Temperature Gas-cooled Reactor (HTGR) Safety design criteria. It is expected that these criteria would consider past experience and existing safety standards in the light of modular HTGR material and design characteristics to propose safety design criteria. It will consider the deterministic and risk-informed safety design standards that apply to the wide spectrum of Off- normal events under development worldwide for existing and planned HTGRs. The CRP would also take into account lessons from the Fukushima Daiichi accident, clarifying the safety approach and safety evaluation criteria for design and beyond design basis events, including those events that can affect multiple reactor modules and/or are dependent on the application proximate to the plant site. (e. g., industrial process steam/heat). The logical flow of criteria is from the fundamental inherent safety characteristics of modular HTGRs and associated expected performance characteristics, to the safety functions required to ensure those characteristics during the wide spectrum of Off-normal events, and finally to specific criteria related to those functions. This is detailed in the paper with specific examples included of how it may be applied. The results of the CRP will be made available to the member states and HTGR community. (author)

Refining SCJ Mission Specifications into Parallel Handler Designs

Directory of Open Access Journals (Sweden)

Frank Zeyda

2013-05-01

Full Text Available Safety-Critical Java (SCJ is a recent technology that restricts the execution and memory model of Java in such a way that applications can be statically analysed and certified for their real-time properties and safe use of memory. Our interest is in the development of comprehensive and sound techniques for the formal specification, refinement, design, and implementation of SCJ programs, using a correct-by-construction approach. As part of this work, we present here an account of laws and patterns that are of general use for the refinement of SCJ mission specifications into designs of parallel handlers used in the SCJ programming paradigm. Our notation is a combination of languages from the Circus family, supporting state-rich reactive models with the addition of class objects and real-time properties. Our work is a first step to elicit laws of programming for SCJ and fits into a refinement strategy that we have developed previously to derive SCJ programs.

Practical Findings from Applying the PSD Model for Evaluating Software Design Specifications

Science.gov (United States)

Räisänen, Teppo; Lehto, Tuomas; Oinas-Kukkonen, Harri

This paper presents practical findings from applying the PSD model to evaluating the support for persuasive features in software design specifications for a mobile Internet device. On the one hand, our experiences suggest that the PSD model fits relatively well for evaluating design specifications. On the other hand, the model would benefit from more specific heuristics for evaluating each technique to avoid unnecessary subjectivity. Better distinction between the design principles in the social support category would also make the model easier to use. Practitioners who have no theoretical background can apply the PSD model to increase the persuasiveness of the systems they design. The greatest benefit of the PSD model for researchers designing new systems may be achieved when it is applied together with a sound theory, such as the Elaboration Likelihood Model. Using the ELM together with the PSD model, one may increase the chances for attitude change.

Learning with and about Advertising in Chemistry Education with a Lesson Plan on Natural Cosmetics--A Case Study

Science.gov (United States)

Belova, Nadja; Eilks, Ingo

2015-01-01

This paper describes a case study on the chemistry behind natural cosmetics in five chemistry learning groups (grades 7-11, age range 13-17) in a German comprehensive school. The lesson plan intends to promote critical media literacy in the chemistry classroom and specifically emphasizes learning with and about advertising. The lessons of four…

Design specifications for manufacturability of MCM-C multichip modules

Energy Technology Data Exchange (ETDEWEB)

Allen, C.; Blazek, R.; Desch, J.; Elarton, J.; Kautz, D.; Markley, D.; Morgenstern, H.; Stewart, R.; Warner, L.

1995-06-01

The scope of this document is to establish design guidelines for electronic circuitry packaged as multichip modules of the ceramic substrate variety, although many of these guidelines are applicable to other types of multichip modules. The guidelines begin with prerequisite information which must be developed between customer and designer of the multichip module. The core of the guidelines focuses on the many considerations that must be addressed during the multichip module design. The guidelines conclude with the resulting deliverables from the design which satisfy customer requirements and/or support the multichip module fabrication and testing processes. Considerable supporting information, checklists, and design constraints are captured in specific appendices and used as reference information in the main body text. Finally some real examples of multichip module design are presented.

Potentials for site-specific design of MW sized wind turbines

DEFF Research Database (Denmark)

Thomsen, K.; Fuglsang, P.; Schepers, G.

2001-01-01

The potential for site specific design of MW sized wind turbines is quantified by comparing design loads for wind turbines installed at a range of different sites. The sites comprise on-shore normal flat terrain stand-alone conditions and wind farm conditions together with offshore and mountainous...

Governing nanobiotechnology: lessons from agricultural biotechnology regulation

International Nuclear Information System (INIS)

Johnson, Robbin S.

2011-01-01

This article uses lessons from biotechnology to help inform the design of oversight for nanobiotechnology. Those lessons suggest the following: first, oversight needs to be broadly defined, encompassing not just regulatory findings around safety and efficacy, but also public understanding and acceptance of the technology and its products. Second, the intensity of scrutiny and review should reflect not just risks but also perceptions of risk. Finally, a global marketplace argues for uniform standards or commercially practical solutions to differences in standards. One way of designing oversight to achieve these purposes is to think about it in three phases—precaution, prudence, and promotion. Precaution comes early in the technology or product’s development and reflects real and perceived uncertainties. Prudence governs when risks and hazards have been identified, containment approaches established, and benefits broadly defined. Transparency and public participation rise to the fore. The promotional phase moves toward shaping public understanding and acceptance and involves marketing issues rather than safety ones. This flexible, three-phase approach to oversight would have avoided some of the early regulatory problems with agricultural biotechnology. It also would have led to a more risk-adjusted pathway to regulatory approval. Furthermore, it would avoid some of the arbitrary, disruptive marketing issues that have arisen.

Exploring Osmosis and Diffusion in Cells: A Guided-Inquiry Activity for Biology Classes, Developed through the Lesson-Study Process

Science.gov (United States)

Maguire, Lauren; Myerowitz, Lindsay; Sampson, Victor

2010-01-01

Guided inquiry is an instructional technique that requires students to answer a teacher-proposed research question, design an investigation, collect and analyze data, and then develop a conclusion (Bell, Smetana, and Binns 2005; NRC 2000). In this article, the authors describe a guided-inquiry lesson developed through the lesson-study process…

Low level waste shipment accident lessons learned

International Nuclear Information System (INIS)

Rast, D.M.; Rowe, J.G.; Reichel, C.W.

1995-01-01

On October 1, 1994 a shipment of low-level waste from the Fernald Environmental Management Project, Fernald, Ohio, was involved in an accident near Rolla, Missouri. The accident did not result in the release of any radioactive material. The accident did generate important lessons learned primarily in the areas of driver and emergency response communications. The shipment was comprised of an International Standards Organization (ISO) container on a standard flatbed trailer. The accident caused the low-level waste package to separate from the trailer and come to rest on its top in the median. The impact of the container with the pavement and median inflicted relatively minor damage to the container. The damage was not substantial enough to cause failure of container integrity. The success of the package is attributable to the container design and the packaging procedures used at the Fernald Environmental Management Project for low-level waste shipments. Although the container survived the initial wreck, is was nearly breached when the first responders attempted to open the ISO container. Even though the container was clearly marked and the shipment documentation was technically correct, this information did not identify that the ISO container was the primary containment for the waste. The lessons learned from this accident have DOE complex wide applicability. This paper is intended to describe the accident, subsequent emergency response operations, and the lessons learned from this incident

Snapshots of mathematics teacher noticing during task design

Science.gov (United States)

Choy, Ban Heng

2016-09-01

Designing a mathematically worthwhile task is critical for promoting students' reasoning. To improve task design skills, teachers often engage in collaborative lesson planning activities such as lesson study. However, to learn from the process of lesson study, it is important for teachers to notice productively the concepts, students' confusion and the design of the task. But what researchers mean by productive noticing varies. In this article, I present the FOCUS Framework which highlights two characteristics of productive noticing: having an explicit focus for noticing and focusing noticing through pedagogical reasoning. Using these two characteristics, I develop snapshots of noticing as a representation of practice to present a fine-grained analysis of teacher noticing. Through vignettes of teachers discussing the design of a task to teach fractions, I illustrate how two teachers' noticing can be analysed and represented using snapshots of noticing. To conclude, I highlight what snapshots of noticing tell us about a teacher's noticing and suggest ways to use these snapshots in future studies of noticing.

What Happens at the Lesson Start?

Science.gov (United States)

Saloviita, Timo

2016-01-01

Transitional periods, such as lesson starts, are necessary steps from one activity to another, but they also compete with time for actual learning. The aim of the present study was to replicate a previous pilot study on lesson starts and explore possible disturbances. In total, 130 lesson starts in Finnish basic education in grades 1-9 were…

Preparing people to make a difference: Transferable lessons from a first-year student leadership development programme in New Zealand. A Practice Report

Directory of Open Access Journals (Sweden)

Hesham Elnagar

2011-02-01

Full Text Available The transition from a secondary to a university education environment is one rife with opportunity and novelty. It can be a difficult time for students as they begin to participate and take part in a new culture. Lessons learned from a specific programme for first-year students, the Emerging Leaders Development Programme (ELDP, provide an example of an initiative that not only assists with the transition, but also offers leadership development opportunities. Data collected from ELDP participants suggests that there are valuable, relatable, and transferable ideas that can inform the design and implementation of other transition programmes generally, and leadership development programmes specifically.   

Molecular design of sequence specific DNA alkylating agents.

Science.gov (United States)

Minoshima, Masafumi; Bando, Toshikazu; Shinohara, Ken-ichi; Sugiyama, Hiroshi

2009-01-01

Sequence-specific DNA alkylating agents have great interest for novel approach to cancer chemotherapy. We designed the conjugates between pyrrole (Py)-imidazole (Im) polyamides and DNA alkylating chlorambucil moiety possessing at different positions. The sequence-specific DNA alkylation by conjugates was investigated by using high-resolution denaturing polyacrylamide gel electrophoresis (PAGE). The results showed that polyamide chlorambucil conjugates alkylate DNA at flanking adenines in recognition sequences of Py-Im polyamides, however, the reactivities and alkylation sites were influenced by the positions of conjugation. In addition, we synthesized conjugate between Py-Im polyamide and another alkylating agent, 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI). DNA alkylation reactivies by both alkylating polyamides were almost comparable. In contrast, cytotoxicities against cell lines differed greatly. These comparative studies would promote development of appropriate sequence-specific DNA alkylating polyamides against specific cancer cells.

Health communication: lessons from research.

Science.gov (United States)

Shanmugam, A V

1981-01-01

In discussing the lessons learned from research in the area of health communication, focus is on basic strategic issues; the scope of health communications in terms of audience, information, education and motivation approaces and India's satellite Instructional Television Experiment (SITE). Health communication is the process by which a health idea is transferred from a source, such as a primary health center, to a receiver, community, with the intention of changing the community's behavior. This involves the formulation of specific strategies for the conduct of health and family welfare communication. In the processs of health communication, it has been a common practice in India as well as in other developing countries to depend upon a plethora of communication media. Yet, despite maximum utilization of the mass media and interpersonal channels of communication, questions remain about the efficacy of the system in bringing about change. Thus, the need to draw upon lessons from research becomes obvious. Communication effectiveness researches have concentrated on 3 basic strategic issues: the question of physical reception of messages by the audience; interpretation or understanding of messages on the part of the audience in accordance with the intention of the communicator; and effectiveness of communication on the cognitive, affective and behavioral dimensions of the audience. Innumberable researches in communication have provided several lessons which have expanded the scope of health communication. This expansion can be observed in terms of audiences reached, information disseminated, education undertaken, and motivation provided. Research has identified several distinct groups to whom specific health messages have to be addressed. These include government and political elites, health and family welfare program administrators, and the medical profession and clinical staff. Information on health needs to include both the concept of health and the pertinent ideas

Deep water challenges for drilling rig design

Energy Technology Data Exchange (ETDEWEB)

Roth, M [Transocean Sedco Forex, Houston, TX (United States)

2001-07-01

Drilling rigs designed for deep water must meet specific design considerations for harsh environments. The early lessons for rig design came from experiences in the North Sea. Rig efficiency and safety considerations must include structural integrity, isolated/redundant ballast controls, triple redundant DP systems, enclosed heated work spaces, and automated equipment such as bridge cranes, pipe handling gear, offline capabilities, subsea tree handling, and computerized drill floors. All components must be designed to harmonize man and machine. Some challenges which are unique to Eastern Canada include frequent storms and fog, cold temperature, icebergs, rig ice, and difficult logistics. This power point presentation described station keeping and mooring issues in terms of dynamic positioning issues. The environmental influence on riser management during forced disconnects was also described. Design issues for connected deep water risers must insure elastic stability, and control deflected shape. The design must also keep stresses within acceptable limits. Codes and standards for stress limits, flex joints and tension were also presented. tabs., figs.

NASIS data base management system - IBM 360/370 OS MVT implementation. 4: Program design specifications

Science.gov (United States)

1973-01-01

The design specifications for the programs and modules within the NASA Aerospace Safety Information System (NASIS) are presented. The purpose of the design specifications is to standardize the preparation of the specifications and to guide the program design. Each major functional module within the system is a separate entity for documentation purposes. The design specifications contain a description of, and specifications for, all detail processing which occurs in the module. Sub-modules, reference tables, and data sets which are common to several modules are documented separately.

Negotiating and Designing Public Space. Experiences with a new M.Sc. in Urban Design Program in Hong Kong

Directory of Open Access Journals (Sweden)

Hendrik Tieben

2013-05-01

Full Text Available This contribution reflects on first experiences made with a newly launched Master of Science in Urban Design program at the Chinese University of Hong Kong. As an important part of this program, students have to develop their design proposal in response to feedback of different stakeholders and community members. Thus the program responds to the growing aspiration of Hong Kong’s citizens to shape the urban development of their city and a lack of a meaningful participation process in the region. With its high density, protected country parks, efficient public transport and large scale housing program, generally, Hong Kong offers important lessons for contemporary urbanism. However, since the end of the British colonial rule and in face of increasing property prices, pollution and the disappearance of local heritage, intensive debates started about the regions future. Another central point of the recent discussion in Hong Kong – and key theme of the new urban design program - is the demand for the rights and qualities of public space. The paper presents the set-up of the design studio, which was closely linked to a course on “urban processes”. During the semester, students had to organize community forums and street exhibitions in a specific district, invite stakeholders and residents and discuss with them their ideas. Their projects, then, had to respond on the various feedbacks and integrate them in their design and policy proposals. The text reflects on the student projects and the lessons learned in the process. It addresses general questions such as the challenges in communicating with a diverse community (e.g. language barriers and culturally different ideas of public space. It addresses the question of the intended and unintended effects of a participatory design studio in the community, and possible follow-ups. And it reflects on the general role of design and designers in shaping community spaces.

Lesson study i Danmark?

DEFF Research Database (Denmark)

Mogensen, Arne

2009-01-01

Der beskrives et japansk lesson study forløb, og det diskuteres i hvilket omfang, de gode japanske erfaringer kan overføres til dansk matematikundervisning.......Der beskrives et japansk lesson study forløb, og det diskuteres i hvilket omfang, de gode japanske erfaringer kan overføres til dansk matematikundervisning....

Using stakeholder analysis to support moves towards universal coverage: lessons from the SHIELD project.

Science.gov (United States)

Gilson, Lucy; Erasmus, Ermin; Borghi, Jo; Macha, Janet; Kamuzora, Peter; Mtei, Gemini

2012-03-01

Stakeholder analysis is widely recommended as a tool for gathering insights on policy actor interests in, positions on, and power to influence, health policy issues. Such information is recognized to be critical in developing viable health policy proposals, and is particularly important for new health care financing proposals that aim to secure universal coverage (UC). However, there remain surprisingly few published accounts of the use of stakeholder analysis in health policy development generally, and health financing specifically, and even fewer that draw lessons from experience about how to do and how to use such analysis. This paper, therefore, aims to support those developing or researching UC reforms to think both about how to conduct stakeholder analysis, and how to use it to support evidence-informed pro-poor health policy development. It presents practical lessons and ideas drawn from experience of doing stakeholder analysis around UC reforms in South Africa and Tanzania, combined with insights from other relevant material. The paper has two parts. The first presents lessons of experience for conducting a stakeholder analysis, and the second, ideas about how to use the analysis to support policy design and the development of actor and broader political management strategies. Comparison of experience across South Africa and Tanzania shows that there are some commonalities concerning which stakeholders have general interests in UC reform. However, differences in context and in reform proposals generate differences in the particular interests of stakeholders and their likely positioning on reform proposals, as well as in their relative balance of power. It is, therefore, difficult to draw cross-national policy comparisons around these specific issues. Nonetheless, the paper shows that cross-national policy learning is possible around the approach to analysis, the factors influencing judgements and the implications for, and possible approaches to, management

A Relevant Lesson: Hitler Goes to the Mall

Science.gov (United States)

Gerwin, David

2003-01-01

A "Motivation" eliciting the "Aim" of each lesson initiates each lesson in the orthodox "developmental lesson-plan" that has dominated classroom instruction in NYC public schools for at least the past half-century. An action-research study of 38 lesson-plans (over 5 each from 5 teachers) drawn from student-teaching…

Previous experience in manned space flight: A survey of human factors lessons learned

Science.gov (United States)

Chandlee, George O.; Woolford, Barbara

1993-01-01

Previous experience in manned space flight programs can be used to compile a data base of human factors lessons learned for the purpose of developing aids in the future design of inhabited spacecraft. The objectives are to gather information available from relevant sources, to develop a taxonomy of human factors data, and to produce a data base that can be used in the future for those people involved in the design of manned spacecraft operations. A study is currently underway at the Johnson Space Center with the objective of compiling, classifying, and summarizing relevant human factors data bearing on the lessons learned from previous manned space flights. The research reported defines sources of data, methods for collection, and proposes a classification for human factors data that may be a model for other human factors disciplines.

Worldwide market developments : lessons for Alberta

International Nuclear Information System (INIS)

Percival, J.F.

1998-01-01

A review of competitive retail electricity markets in Argentina, New Zealand, Australia and California were discussed, highlighting lessons for Alberta policy makers, market designers and electricity retailers. Some of the emerging strategies in the retail electricity marketplace such as horizontal integration, generation retailing, defensive retailing and virtual vertical integration were explored. Emphasis was on showing that electricity retailing is not an easy business. It is a business for large and existing players, and although horizontal and vertical integration have growth and profit potential, there are also risks

EC6 safety enhancement - including impact of Fukushima lessons learned

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Zemdegs, R.; Boyle, S.; Soulard, M., E-mail: stephen.yu@candu.com [Candu Energy Inc., Mississauga, Ontario (Canada)

2012-09-15

The Enhanced CANDU 6 (EC6) is the new Generation III CANDU reactor design that meets the most up to date regulatory requirements and customer expectations. EC6 builds on the proven high performance design inch as the Qinshan CANDU 6 units and has made improvements to safety and operational performance, and has incorporated extensive operational feedback including Fukushima. The Fukushima Dai-ichi March 11, 2011 event has demonstrated the importance of defence-in-depth considerations for beyond-design basis events, including severe accidents. The EC6 design is based on the defence-in-depth principles and provides further design features that address the lessons learned from Fukushima. (author)

Design Safety Considerations for Water Cooled Small Modular Reactors Incorporating Lessons Learned from the Fukushima Daiichi Accident

International Nuclear Information System (INIS)

2016-03-01

The global future deployment of advanced nuclear reactors for electricity generation depends primarily on the ability of nuclear industries, utilities and regulatory authorities to further enhance their reliability and economic competitiveness while satisfying stringent safety requirements. The IAEA has a project to help coordinate Member States efforts in the development and deployment of small and medium sized or small modular reactor (SMR) technology. This project aims simultaneously to facilitate SMR technology developers and potential SMR uses, particularly States embarking on a nuclear power programme, in identifying key enabling technologies and enhancing capacity building by resolving issues relevant to deployment, including nuclear reactor safety. The objective of this publication is to explore common practices for Member States, which will be an essential resource for future development and deployment of SMR technology. The accident at the Fukushima Daiichi nuclear power plant was caused by an unprecedented combination of natural events: a strong earthquake, beyond the design basis, followed by a series of tsunamis of heights exceeding the design basis tsunami considered in the flood analysis for the site. Consequently, all the operating nuclear power plants and advanced reactors under development, including SMRs, have been incorporating lessons learned from the accident to assure and enhance the performance of the engineered safety features in coping with such external events

Planning lessons with learning platforms - problem and prospects for mathematics education

DEFF Research Database (Denmark)

Tamborg, Andreas Lindenskov

2018-01-01

is a key intention behind the implementation of the platform. It is also concluded that when the teachers succeed in using learning objectives actively in their planning, the objectives support the teachers in designing lessons that correspond with their intentions. The paper concludes with a discussion...

Engineering Design for Engineering Design: Benefits, Models, and Examples from Practice

Science.gov (United States)

Turner, Ken L., Jr.; Kirby, Melissa; Bober, Sue

2016-01-01

Engineering design, a framework for studying and solving societal problems, is a key component of STEM education. It is also the area of greatest challenge within the Next Generation Science Standards, NGSS. Many teachers feel underprepared to teach or create activities that feature engineering design, and integrating a lesson plan of core content…

Simulation Data Management - Requirements and Design Specification

Energy Technology Data Exchange (ETDEWEB)

Clay, Robert L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Friedman-Hill, Ernest J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gibson, Marcus J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hoffman, Edward L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Olson, Kevin H. [Science Applications International Corporation (SAIC), Reston, VA (United States); Laney, Daniel [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-11-01

Simulation Data Management (SDM), the ability to securely organize, archive, and share analysis models and the artifacts used to create them, is a fundamental requirement for modern engineering analysis based on computational simulation. We have worked separately to provide secure, network SDM services to engineers and scientists at our respective laboratories for over a decade. We propose to leverage our experience and lessons learned to help develop and deploy a next-generation SDM service as part of a multi-laboratory team. This service will be portable across multiple sites and platforms, and will be accessible via a range of command-line tools and well-documented APIs. In this document, we’ll review our high-level and low-level requirements for such a system, review one existing system, and briefly discuss our proposed implementation.

Design and component specifications for high average power laser optical systems

Energy Technology Data Exchange (ETDEWEB)

O' Neil, R.W.; Sawicki, R.H.; Johnson, S.A.; Sweatt, W.C.

1987-01-01

Laser imaging and transport systems are considered in the regime where laser-induced damage and/or thermal distortion have significant design implications. System design and component specifications are discussed and quantified in terms of the net system transport efficiency and phase budget. Optical substrate materials, figure, surface roughness, coatings, and sizing are considered in the context of visible and near-ir optical systems that have been developed at Lawrence Livermore National Laboratory for laser isotope separation applications. In specific examples of general applicability, details of the bulk and/or surface absorption, peak and/or average power damage threshold, coating characteristics and function, substrate properties, or environmental factors will be shown to drive the component size, placement, and shape in high-power systems. To avoid overstressing commercial fabrication capabilities or component design specifications, procedures will be discussed for compensating for aberration buildup, using a few carefully placed adjustable mirrors. By coupling an aggressive measurements program on substrates and coatings to the design effort, an effective technique has been established to project high-power system performance realistically and, in the process, drive technology developments to improve performance or lower cost in large-scale laser optical systems. 13 refs.

Design and component specifications for high average power laser optical systems

International Nuclear Information System (INIS)

O'Neil, R.W.; Sawicki, R.H.; Johnson, S.A.; Sweatt, W.C.

1987-01-01

Laser imaging and transport systems are considered in the regime where laser-induced damage and/or thermal distortion have significant design implications. System design and component specifications are discussed and quantified in terms of the net system transport efficiency and phase budget. Optical substrate materials, figure, surface roughness, coatings, and sizing are considered in the context of visible and near-ir optical systems that have been developed at Lawrence Livermore National Laboratory for laser isotope separation applications. In specific examples of general applicability, details of the bulk and/or surface absorption, peak and/or average power damage threshold, coating characteristics and function, substrate properties, or environmental factors will be shown to drive the component size, placement, and shape in high-power systems. To avoid overstressing commercial fabrication capabilities or component design specifications, procedures will be discussed for compensating for aberration buildup, using a few carefully placed adjustable mirrors. By coupling an aggressive measurements program on substrates and coatings to the design effort, an effective technique has been established to project high-power system performance realistically and, in the process, drive technology developments to improve performance or lower cost in large-scale laser optical systems. 13 refs

18th edition of the Forum on specification and Design Languages Conference

CERN Document Server

Wille, Robert

2016-01-01

This book brings together a selection of the best papers from the eighteenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on September 14-16, 2015, in Barcelona, Spain. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers Assertion Based Design, Verification & Debug; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering...

17th edition of the Forum on specification and Design Languages Conference

CERN Document Server

Pasaje, Julio

2016-01-01

This book brings together a selection of the best papers from the seventeenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on October 14-16, 2014, in Munich, Germany.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.   •Covers Assertion Based Design, Verification & Debug; •Includes language-based modeling and design techniques for embedded systems; •Covers design, modeling and verification of mixed physical domain and mixed signal systems; •Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering (MDE); •Covers parallel architectures – both as platforms f...

Transforming Past Lessons to Mold the Future: A Case Study on Operation NICKEL GRASS

National Research Council Canada - National Science Library

Riney, Thomas J

2003-01-01

...?" In this case, the specific lessons from the 1973 airlift operation supporting Israel, Operation NICKEL GRASS, were analyzed and generalized using the Tenets of Operations described in U.S. Army field manuals...

Fostering sustainable small-scale investments: lessons from experience and ideas for intervention and innovation

International Nuclear Information System (INIS)

Lucia, R.J. de

2000-01-01

This article presents lessons from experience pertinent to implementing small-scale natural resource and related investment projects in developing countries. It outlines ideas for intervention and innovation to foster such investments. Particular emphasis is placed on private-sector participation in these investments. Following a brief presentation of the economic development and other arguments that support intervention and innovation in support of such small-scale natural resource investments, the article discusses many of the lessons learned from experience. These lessons reinforce those touched upon in the investment-specific discussions in the previous articles. The experience and associated lessons that are examined include experiences in both developing and developed countries and encompass nor just lessons from natural resource investments, but also small-scale investments in other sectors. Financing and other innovations which facilitate meeting the challenges are drawn from relevant experience where barriers to investment have been surmounted. Options for programme and project interventions to increase market penetration of small-scale investments and achieve the associated development linkages and synergies are suggested. These suggestions are aimed especially at governments and bilateral and multilateral development finance and development assistance entities. It is those players who might support such interventions in collaboration with local financial institutions and other market players. (author)

Transition and Closeout of the Former DOE Mound Plant Site: Lessons Learned

International Nuclear Information System (INIS)

Carpenter, C. P.; Marks, M. L.; Smiley, S.L.; Gallaher, D. M.

2006-01-01

The U.S. Department of Energy's (DOE's) Office of Environmental Management (EM) manages the Miamisburg Closure Project (MCP) by cleaning up the Mound site, located in Miamisburg, Ohio, to specific environmental standards, conveying all excess land parcels to the Miamisburg Mound Community Improvement Corporation, and transferring all continuing DOE post-closure responsibilities to the Office of Legacy Management (LM). Presently, the EM cleanup contract of the Mound site with CH2M Hill Mound Inc. is scheduled for completion on March 31, 2006. LM manages the Mound transition efforts and also post-closure responsibilities at other DOE sites via a contract with the S.M. Stoller Corporation. The programmatic transfer from EM to LM is scheduled to take place on October 1, 2006. The transition of the Mound site has required substantial integration and coordination between the EM and LM. Several project management principles have been implemented to help facilitate the transfer of programmatic responsibility. As a result, several lessons learned have been identified to help streamline and improve integration and coordination of the transfer process. Lessons learned from the Mound site transition project are considered a work in progress and have been summarized according to a work breakdown structure for specific functional areas in the transition schedule. The functional areas include program management, environmental, records management, information technology, property management, stakeholder and regulatory relations, procurement, worker pension and benefits, and project closeout. Specific improvements or best practices have been recognized and documented by the Mound transition team. The Mound site is one of three major cleanup sites within the EM organization scheduled for completion in 2006. EM, EM cleanup contractor, LM, and LM post-closure contractor have identified lessons learned during the transition and closure of the Mound site. The transition effort from

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

International Nuclear Information System (INIS)

G. L. Sharp; R. T. McCracken

2004-01-01

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzed in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR safety

Transforming Multidisciplinary Customer Requirements to Product Design Specifications

Science.gov (United States)

Ma, Xiao-Jie; Ding, Guo-Fu; Qin, Sheng-Feng; Li, Rong; Yan, Kai-Yin; Xiao, Shou-Ne; Yang, Guang-Wu

2017-09-01

With the increasing of complexity of complex mechatronic products, it is necessary to involve multidisciplinary design teams, thus, the traditional customer requirements modeling for a single discipline team becomes difficult to be applied in a multidisciplinary team and project since team members with various disciplinary backgrounds may have different interpretations of the customers' requirements. A new synthesized multidisciplinary customer requirements modeling method is provided for obtaining and describing the common understanding of customer requirements (CRs) and more importantly transferring them into a detailed and accurate product design specifications (PDS) to interact with different team members effectively. A case study of designing a high speed train verifies the rationality and feasibility of the proposed multidisciplinary requirement modeling method for complex mechatronic product development. This proposed research offersthe instruction to realize the customer-driven personalized customization of complex mechatronic product.

Sharing Lessons Learned Between Industries in EU

International Nuclear Information System (INIS)

Muehleisen, A.; Strucic, M.

2012-01-01

Recent events in nuclear industry remind us on importance of continuous sharing of the knowledge and experience gained through evaluations of incidents and accidents. We frequently use experience from our daily life activities to improve our performance and avoid some mistakes or unwanted events. In the similar way we can use other industries experience. These experiences can be applied to improve nuclear safety. For example, Safety Culture, which has a great influence on the level of nuclear power plants safety, is similarly presented in other industries. Mechanisms which led to accidents from weak safety culture in one branch of other industry could be comparable to those in nuclear industry. Some other industries have many more cumulative years of experience than nuclear industry. Aviation and Oil industries are typical representatives. Part of their experience can be used in nuclear industry too. Number of reports from nuclear power plants showed us that not only specific equipment related causes lay behind accidents; there are also other causes and contributors which are more common for all industries. Hence lessons learned in other industry should be assessed and used in nuclear industry too. In the European Union, a regional initiative has been set up in 2008 in support of EU Member State nuclear safety authorities, but also EU technical support organizations, international organizations and the broader nuclear community, to enhance nuclear safety through improvement of the use of lessons learned from operational experience of nuclear power plants (NPPs). The initiative, called ''the EU Clearinghouse on Operational Experience Feedback for NPP'', is organized as a network operated by a centralized office located at the Joint Research Centre of the European Commission. The reduction of occurrence and significance of events in NPPs and their safe operation is its ultimate goal. Among others EU Clearinghouse provides services such as technical and scientific

Defining a risk-informed framework for whole-of-government lessons learned: A Canadian perspective.

Science.gov (United States)

Friesen, Shaye K; Kelsey, Shelley; Legere, J A Jim

Lessons learned play an important role in emergency management (EM) and organizational agility. Virtually all aspects of EM can derive benefit from a lessons learned program. From major security events to exercises, exploiting and applying lessons learned and "best practices" is critical to organizational resilience and adaptiveness. A robust lessons learned process and methodology provides an evidence base with which to inform decisions, guide plans, strengthen mitigation strategies, and assist in developing tools for operations. The Canadian Safety and Security Program recently supported a project to define a comprehensive framework that would allow public safety and security partners to regularly share event response best practices, and prioritize recommendations originating from after action reviews. This framework consists of several inter-locking elements: a comprehensive literature review/environmental scan of international programs; a survey to collect data from end users and management; the development of a taxonomy for organizing and structuring information; a risk-informed methodology for selecting, prioritizing, and following through on recommendations; and standardized templates and tools for tracking recommendations and ensuring implementation. This article discusses the efforts of the project team, which provided "best practice" advice and analytical support to ensure that a systematic approach to lessons learned was taken by the federal community to improve prevention, preparedness, and response activities. It posits an approach by which one might design a systematic process for information sharing and event response coordination-an approach that will assist federal departments to institutionalize a cross-government lessons learned program.

Towards Cognitive Load Theory as Guideline for Instructional Design in Science Education

Science.gov (United States)

Meissner, Barbara; Bogner, Franz X.

2013-01-01

We applied cognitive load theory in an heuristic out-of-school science lesson. The lesson comprises experiments concerning major attributes of NaCl and was designed for 5th to 8th grade students. Our interest focused on whether cognitive load theory provides sufficient guidelines for instructional design in the field of heuristic science…

Lessons that Bear Repeating and Repeating that Bears Lessons: An Interdisciplinary Unit on Principles of Minimalism in Modern Music, Art, and Poetry (Grades 4-8)

Science.gov (United States)

Smigel, Eric; McDonald, Nan L.

2012-01-01

This theory-to-practice article focuses on interdisciplinary classroom activities based on principles of minimalism in modern music, art, and poetry. A lesson sequence was designed for an inner-city Grades 4 and 5 general classroom of English language learners, where the unit was taught, assessed, and documented by the authors. Included in the…

Lessons Learned in Designing and Implementing a Computer-Adaptive Test for English

Directory of Open Access Journals (Sweden)

Jack Burston

2014-09-01

Full Text Available This paper describes the lessons learned in designing and implementing a computer-adaptive test (CAT for English. The early identification of students with weak L2 English proficiency is of critical importance in university settings that have compulsory English language course graduation requirements. The most efficient means of diagnosing the L2 English ability of incoming students is by means of a computer-based test since such evaluation can be administered quickly, automatically corrected, and the outcome known as soon as the test is completed. While the option of using a commercial CAT is available to institutions with the ability to pay substantial annual fees, or the means of passing these expenses on to their students, language instructors without these resources can only avail themselves of the advantages of CAT evaluation by creating their own tests.  As is demonstrated by the E-CAT project described in this paper, this is a viable alternative even for those lacking any computer programing expertise.  However, language teaching experience and testing expertise are critical to such an undertaking, which requires considerable effort and, above all, collaborative teamwork to succeed. A number of practical skills are also required. Firstly, the operation of a CAT authoring programme must be learned. Once this is done, test makers must master the art of creating a question database and assigning difficulty levels to test items. Lastly, if multimedia resources are to be exploited in a CAT, test creators need to be able to locate suitable copyright-free resources and re-edit them as needed.

Moderate-to-vigorous physically active academic lessons and academic engagement in children with and without a social disadvantage : a within subject experimental design

NARCIS (Netherlands)

Mullender-Wijnsma, Marijke J.; Hartman, Esther; de Greeff, Johannes W.; Bosker, Roel J.; Doolaard, Simone; Visscher, Chris

2015-01-01

Background: Integration of physical active academic lessons in the school curriculum may be an innovative way to improve academic outcomes. This study examined the effect of physically active academic lessons (Fit en Vaardig op school) on academic engagement of socially disadvantaged children and

Importance of Students' Views and the Role of Self-Esteem in Lessons of Creative Dance in Physical Education

Science.gov (United States)

Steinberg, Claudia; Steinberg, Fabian

2016-01-01

The purpose of this study was to capture the student's views in lessons of creative dance. A qualitative empirical research design was carried out using video-stimulated recall interviews. The participants in this study were 88 children (63 female and 25 male) between the ages of 9 and 11 years (M = 10.5, SD = 1.2) in physical education lessons. A…

Exploring Students’ Reflections about Values inside the Implementation of Storied Lessons Based on Students’ Life Experiences

Directory of Open Access Journals (Sweden)

Mónica Castiblanco

2007-12-01

Full Text Available This article informs on students’ reflections about their life experiences and values based on the implementation of storied lessons compiled in a primer designed by the English teachers-researchers. Each storied lesson comes from some students’ life stories, the values promoted by the school such as respect, honesty, responsibility, and solidarity, and the English topic for each class in order to allow students to feel comfortable reflecting and giving opinions regarding the issues mentioned above.

Salt bridges: geometrically specific, designable interactions.

Science.gov (United States)

Donald, Jason E; Kulp, Daniel W; DeGrado, William F

2011-03-01

Salt bridges occur frequently in proteins, providing conformational specificity and contributing to molecular recognition and catalysis. We present a comprehensive analysis of these interactions in protein structures by surveying a large database of protein structures. Salt bridges between Asp or Glu and His, Arg, or Lys display extremely well-defined geometric preferences. Several previously observed preferences are confirmed, and others that were previously unrecognized are discovered. Salt bridges are explored for their preferences for different separations in sequence and in space, geometric preferences within proteins and at protein-protein interfaces, co-operativity in networked salt bridges, inclusion within metal-binding sites, preference for acidic electrons, apparent conformational side chain entropy reduction on formation, and degree of burial. Salt bridges occur far more frequently between residues at close than distant sequence separations, but, at close distances, there remain strong preferences for salt bridges at specific separations. Specific types of complex salt bridges, involving three or more members, are also discovered. As we observe a strong relationship between the propensity to form a salt bridge and the placement of salt-bridging residues in protein sequences, we discuss the role that salt bridges might play in kinetically influencing protein folding and thermodynamically stabilizing the native conformation. We also develop a quantitative method to select appropriate crystal structure resolution and B-factor cutoffs. Detailed knowledge of these geometric and sequence dependences should aid de novo design and prediction algorithms. Copyright © 2010 Wiley-Liss, Inc.

Scheduling lessons learned from the Autonomous Power System

Science.gov (United States)

Ringer, Mark J.

1992-01-01

The Autonomous Power System (APS) project at NASA LeRC is designed to demonstrate the applications of integrated intelligent diagnosis, control, and scheduling techniques to space power distribution systems. The project consists of three elements: the Autonomous Power Expert System (APEX) for Fault Diagnosis, Isolation, and Recovery (FDIR); the Autonomous Intelligent Power Scheduler (AIPS) to efficiently assign activities start times and resources; and power hardware (Brassboard) to emulate a space-based power system. The AIPS scheduler was tested within the APS system. This scheduler is able to efficiently assign available power to the requesting activities and share this information with other software agents within the APS system in order to implement the generated schedule. The AIPS scheduler is also able to cooperatively recover from fault situations by rescheduling the affected loads on the Brassboard in conjunction with the APEX FDIR system. AIPS served as a learning tool and an initial scheduling testbed for the integration of FDIR and automated scheduling systems. Many lessons were learned from the AIPS scheduler and are now being integrated into a new scheduler called SCRAP (Scheduler for Continuous Resource Allocation and Planning). This paper will service three purposes: an overview of the AIPS implementation, lessons learned from the AIPS scheduler, and a brief section on how these lessons are being applied to the new SCRAP scheduler.

Lessons drawn from the operation of EDF 900MW nuclear power plants to evaluate and improve safety

International Nuclear Information System (INIS)

Brisbois, J.; Dupuis, M.C.; Marcille, R.

1986-06-01

The lessons drawn from operation are used to detect the weak points not taken sufficiently into account by the design studies and to check that system availability remains at least equal to the level defined at the design stage. In both cases, they aim at deciding what remedial actions are to be taken. The latter may result in additional obligations (modification or addition of equipment or operating rules) and, in certain cases, may slacken obligations. This paper examines in turn: how are the events recorded and then analyzed, what lessons are drawn using concrete examples, what contribution is made by probabilistic risk studies using experience feedback in evaluating overall safety [fr

SEL/Project Language. Level II, Kindergarten, Volume I (Lessons 1-16).

Science.gov (United States)

Valladares, Ann E.; And Others

The document is an intervention curriculum guide designed to facilitate the initial adjustment of disadvantaged Southeastern children to kindergarten or first grade. The major emphasis is on the teaching of language skills in combination with subject matter learning using a language-experience approach. This volume contains Lessons 1-16 of a…

Effect of Pop Music on Students' Attitudes to Music Lessons

Science.gov (United States)

Özdemir, Gökhan; Çiftçibasi, M. Can

2017-01-01

This study aims to identify whether the use of popular music in teaching song creates a significant difference in attitudes of middle school students to music lessons. "Pretest-posttest design" from experimental models was used. The experimental and control groups consists of 8 classes of continuing education from four different middle…

Post accident training program design at Three Mile Island

International Nuclear Information System (INIS)

Lawyer, L.L.

1981-01-01

The TMI preaccident training staff typically consisted of 9 professional and 3 administrative support persons. Procedures were prepared and facilities designated for operator training. The thrust of the post accident effort was directed to expanding the training function to include all other personnel while modifying the operator training to address lessons learned. Significant experiences were encountered in part task simulation, job and task analysis, decision analysis and with various external committees. These experiences led to specific opinions on industry needs in the areas of staffing, regulation, importance of training and contractor assistance

Remarkable Computing - the Challenge of Designing for the Home

DEFF Research Database (Denmark)

Petersen, Marianne Graves

2004-01-01

The vision of ubiquitous computing is floating into the domain of the household, despite arguments that lessons from design of workplace artefacts cannot be blindly transferred into the domain of the household. This paper discusses why the ideal of unremarkable or ubiquitous computing is too narrow...... with respect to the household. It points out how understanding technology use, is a matter of looking into the process of use and on how the specific context of the home, in several ways, call for technology to be remarkable rather than unremarkable....

Lesson study: Professional development and its impact on science teacher self-efficacy

Science.gov (United States)

Roberts, Megan Rae

This study focuses on an analysis of a professional development program known as lesson study via data obtained during an in-service professional development program for secondary school science teachers. The purpose of this study was to examine the self-efficacy beliefs of one group of science teachers related to their experiences in a lesson study. Another purpose for this research, aligned with the first, included a theoretical analysis of the lesson study construct to see if its design promoted positive self-efficacy beliefs of its participants. The research is framed within the context of social constructivism and self-efficacy and is qualitative in nature and utilized descriptive analysis as a means of research. Case studies were conducted detailing two of the six participants. Data sources included researcher field notes and transcriptions of all planning and debriefing sessions; individual interviews with each participant and the schools' principal; a participant questionnaire, and the Science Teaching Efficacy Belief Instrument. Themes that emerged included the positive perceptions of lesson study as a collaborative and teacher-centered experience; the understanding that lesson study can instill a sense of professionalism to those who participate in the process; the sense that discussing student learning using objective observations from classroom is a powerful way to assess learning and uncover personal teacher beliefs; and the insight that the time commitment that lesson study requires can inhibit teachers and schools from sustaining it as a form of on-going professional development. Although these themes are consistent with the research on lesson study in Japan and elsewhere in the United States, they also extend the research on self-efficacy and science teacher professional development. In the end, this study supported some of the conclusions of the self-efficacy research as it relates to professional development while also adding that interpersonal

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

Science.gov (United States)

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

Design, Specification, and Synthesis of Aircraft Electric Power Systems Control Logic

Science.gov (United States)

Xu, Huan

Cyber-physical systems integrate computation, networking, and physical processes. Substantial research challenges exist in the design and verification of such large-scale, distributed sensing, actuation, and control systems. Rapidly improving technology and recent advances in control theory, networked systems, and computer science give us the opportunity to drastically improve our approach to integrated flow of information and cooperative behavior. Current systems rely on text-based specifications and manual design. Using new technology advances, we can create easier, more efficient, and cheaper ways of developing these control systems. This thesis will focus on design considerations for system topologies, ways to formally and automatically specify requirements, and methods to synthesize reactive control protocols, all within the context of an aircraft electric power system as a representative application area. This thesis consists of three complementary parts: synthesis, specification, and design. The first section focuses on the synthesis of central and distributed reactive controllers for an aircraft elec- tric power system. This approach incorporates methodologies from computer science and control. The resulting controllers are correct by construction with respect to system requirements, which are formulated using the specification language of linear temporal logic (LTL). The second section addresses how to formally specify requirements and introduces a domain-specific language for electric power systems. A software tool automatically converts high-level requirements into LTL and synthesizes a controller. The final sections focus on design space exploration. A design methodology is proposed that uses mixed-integer linear programming to obtain candidate topologies, which are then used to synthesize controllers. The discrete-time control logic is then verified in real-time by two methods: hardware and simulation. Finally, the problem of partial observability and

Application software, domain-specific languages, and language design assistants

NARCIS (Netherlands)

J. Heering (Jan)

2000-01-01

textabstractWhile application software does the real work, domain-specific languages (DSLs) are tools to help produce it efficiently, and language design assistants in turn are meta-tools to help produce DSLs quickly. DSLs are already in wide use (HTML for web pages, Excel macros for spreadsheet

Artefact specification, design, and production as a process of communication

DEFF Research Database (Denmark)

Galle, Per

1999-01-01

about communication as literal ‘transmission’ or ‘sharing’ of ideas. It is then explained how the initial artefact specification, the design representation, and ultimately the artefact itself can all be seen as symbolic expressions of ideas that are communicated, and it is shown how the conditions...... for the success of communication carry over to the artefact production process. The purpose of the analysis is to provide a conceptual background for the study of various aspects of artefact production, such as design, or the development of computer-based tools for collaborative design, product modelling...

The art of co-production of knowledge in environmental sciences and management: lessons from international practice

Science.gov (United States)

Djenontin, Ida Nadia S.; Meadow, Alison M.

2018-06-01

This review paper addresses the challenging question of "how to" design and implement co-production of knowledge in climate science and other environmental and agricultural sciences. Based on a grounded theory review of nine (9) published case studies of transdisciplinary and collaborative research projects, the paper offers a set of common themes regarding specific components and processes for the design, implementation, and achievement of co-production of knowledge work, which represent the "Modus Operandi" of knowledge co-production. The analysis focuses on practical methodological guidance based on lessons from how different research teams have approached the challenges of complex collaborative research. We begin by identifying broad factors or actions that inhibit or facilitate the process, then highlight specific practices associated with co-production of knowledge and necessary competencies for undertaking co-production. We provide insights on issues such as the integration of social and professional cultures, gender and social equity, and power dynamics, and illustrate the different ways in which researchers have addressed these issues. By exploring the specific practices involved in knowledge co-production, this paper provides guidance to researchers on how to navigate different possibilities of the process of conducting transdisciplinary and co-production of knowledge research projects that best fit their research context, stakeholder needs, and research team capacities.

Designs of precoding for LTE TDD using cell specific reference signals

DEFF Research Database (Denmark)

Sun, Fan; Lu, Lu; Sørensen, Troels Bundgaard

2010-01-01

We design non-codebook-based Multiple-Input Multiple-Output (MIMO) precoding schemes using multiple cell-specific reference signals patterns for the time division duplex (TDD) mode of LTE, where channel reciprocity can be exploited. Previously proposed non-codebookbased precoding schemes typically...... use UE specific reference signals for demodulation. Cell specific reference signals are however always allocated for the transmission of common control signalling, mobility measurements and downlink channel quality measurements. In order to save the resources occupied by UE specific reference signals...

Simple and Practical Efficiency Lessons

Science.gov (United States)

Kolpin, Van

2018-01-01

The derivation of conditions necessary for Pareto efficient production and exchange is a lesson frequently showcased in microeconomic theory textbooks. Traditional delivery of this lesson is, however, limited in its scope of application and can be unnecessarily convoluted. The author shows that the universe of application is greatly expanded and a…

Design Process of Flight Vehicle Structures for a Common Bulkhead and an MPCV Spacecraft Adapter

Science.gov (United States)

Aggarwal, Pravin; Hull, Patrick V.

2015-01-01

Design and manufacturing space flight vehicle structures is a skillset that has grown considerably at NASA during that last several years. Beginning with the Ares program and followed by the Space Launch System (SLS); in-house designs were produced for both the Upper Stage and the SLS Multipurpose crew vehicle (MPCV) spacecraft adapter. Specifically, critical design review (CDR) level analysis and flight production drawing were produced for the above mentioned hardware. In particular, the experience of this in-house design work led to increased manufacturing infrastructure for both Marshal Space Flight Center (MSFC) and Michoud Assembly Facility (MAF), improved skillsets in both analysis and design, and hands on experience in building and testing (MSA) full scale hardware. The hardware design and development processes from initiation to CDR and finally flight; resulted in many challenges and experiences that produced valuable lessons. This paper builds on these experiences of NASA in recent years on designing and fabricating flight hardware and examines the design/development processes used, as well as the challenges and lessons learned, i.e. from the initial design, loads estimation and mass constraints to structural optimization/affordability to release of production drawing to hardware manufacturing. While there are many documented design processes which a design engineer can follow, these unique experiences can offer insight into designing hardware in current program environments and present solutions to many of the challenges experienced by the engineering team.

Keep It Simple: A Lesson in Linking Teens to Health Care

Science.gov (United States)

Eisler, Alexandra; Avellino, Lia; Chilcoat, Deborah; Schlanger, Karen

2016-01-01

The "Keep It Simple" package, which includes a short animated film (available online for streaming or download), a lesson plan, and supporting materials, was designed to be used with adolescents ages 15-19 to empower them to seek sexual and reproductive health care, and emphasize the availability of long-acting reversible contraception…

Pollution prevention program for new projects -- Lessons learned

Energy Technology Data Exchange (ETDEWEB)

Lum, J. [Dept. of Energy, Washington, DC (United States)

1993-03-01

The purpose of this presentation is to relay the experience of the Office of New Production Reactors (NP) in developing and implementing its pollution prevention program. NP was established to plan, design, and construct a new safe and environmentally acceptable nuclear reactor capacity necessary to provide an assured supply of tritium to maintain the nation`s long-term deterrent capability. The Program offered the Department of Energy an opportunity to demonstrate its commitment to environmental protection via minimization of environmental releases; new design offers the best opportunity for pollution prevention. The NP pollution prevention program was never fully implemented because NP`s tritium production design activity was recovery terminated. The information in this paper represented lessons learned from the last three years of NP operation.

From customer needs to partners network specifications: (Design-Manufacturing-Supply) needs matrix

OpenAIRE

Zouggar , Salah; Zolghadri , Marc; Girard , P.

2008-01-01

New Product Design (NPD) projects consider sequentially various phases of new product design project: customer needs clarification, product specifications, design process, partners selection. Such sequencing ignores possible impacts of partners on the way that the product will be designed and realised. This paper explores early consideration of the partners network for building up relevant partnerships in NPD projects. We attempt to highlight the gain of visibility through suggested Design, M...

Photovoltaic balance-of-system designs and costs at PVUSA

Science.gov (United States)

Reyes, A. B.; Jennings, C.

1995-05-01

This report is one in a series of 1994-1995 PVUSA reports that document PVUSA lessons learned at demonstration sites in California and Texas. During the last 7 years (1988 to 1994), 16 PV systems ranging from 20 kW to 500 kW have been installed. Six 20-kW emerging module technology (EMT) arrays and three turnkey (i.e., vendor designed and integrated) utility-scale systems were procured and installed at PVUSA's main test site in Davis, California. PVUSA host utilities have installed a total of seven EMT arrays and utility-scale systems in their service areas. Additional systems at Davis and host utility sites are planned. One of PVUSA's key objectives is to evaluate the performance, reliability, and cost of PV balance-of-system (BOS). In the procurement stage PVUSA encouraged innovative design to improve upon present practice by reducing maintenance, improving reliability, or lowering manufacturing or construction costs. The project team worked closely with suppliers during the design stage not only to ensure designs met functional and safety specifications, but to provide suggestions for improvement. This report, intended for the photovoltaic (PV) industry and for utility project managers and engineers considering PV plant construction and ownership, documents PVUSA utility-scale system design and cost lessons learned. Complementary PVUSA topical reports document: construction and safety experience; five-year assessment of EMTs; validation of the Kerman 500-kW grid-support PV plant benefits; PVUSA instrumentation and data analysis techniques; procurement, acceptance, and rating practices for PV power plants; experience with power conditioning units and power quality.

Scientific collaborations on Living Labs: some lessons learnt from South Africa and Tanzania

CSIR Research Space (South Africa)

Herselman, M

2015-11-01

Full Text Available The purpose of this paper is to provide an overview of the specific lessons that were learnt when Tanzanian and South African Living Labs (LL) collaborated to support one another. It was a scientific collaboration which focussed on Living Labs...

Masterwork Art Lesson: Kandinsky Watercolors.

Science.gov (United States)

LiPira, Michael

2003-01-01

Presents an art lesson used with sixth-grade students which also can be used with other grade levels. Explains that the artwork of Wassily Kandinsky served as inspiration for this lesson. Explains that the students learned about abstract art and used watercolors to create their own paintings in the style of Kandinsky. (CMK)

Bead Game Simulation. Lesson Plan.

Science.gov (United States)

Ripp, Ken

This lesson plan offers students the opportunity to participate in the three basic economic systems (market, command, and tradition). By working in each of the systems, students will internalize the fundamental values present in each system and will gain insights into the basic advantages and disadvantages of each system. The lesson plan provides…

REDD+ Crossroads Post Paris: Politics, Lessons and Interplays

Directory of Open Access Journals (Sweden)

Esteve Corbera

2017-12-01

Full Text Available This article introduces the special issue “REDD+ crossroads post Paris: politics, lessons and interplays”. The contributions to the special issue demonstrate, first, that REDD+ design in the studied countries has generally lacked social legitimacy and sidelined key actors that have an important role in shaping land-use sector dynamics. Second, they show that REDD+ early actions have tended to oversimplify local realities and have been misaligned with other policy goals and local needs. Third, REDD+ efforts have remained constrained to the forestry or climate mitigation policy sectors and have thus suffered from a lack of harmonization across local, national and international concerns, specifically of contradictory policy. As REDD+ moves from its preparedness to its implementation phase, more research efforts should be aimed at analysing the power relations that underpin and determine the design and implementation of REDD+ policies and actions, the potential for and limits to the vertical and horizontal harmonization of land-use policies and management, and the processes of resistance to or accommodation of REDD+ practices on the ground. In doing so, we advocate for multi-and transdisciplinary research that does not take for granted the benefits of REDD+ and which critically scrutinizes the multiple goals of this ambitious international policy framework, and where it sits within the broader Paris Agreement implementation agenda.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Chinese Ed.)

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (French Ed.)

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Arabic Ed.)

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2012-01-01

This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Russian Edition)

International Nuclear Information System (INIS)

2012-01-01

This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Physically active academic lessons in elementary children.

Science.gov (United States)

Bartholomew, John B; Jowers, Esbelle M

2011-06-01

Although schools are an ideal location to conduct interventions that target children, the emphasis on standardized testing makes it difficult to implement interventions that do not directly support academic instruction. In response, physically active academic lessons have been developed as a strategy to increase physical activity while also addressing core educational goals. Texas I-CAN! is one incarnation of this approach. We will review the on-going research on the impact of these active lessons on: teacher implementation, child step count, child attention control, and academic performance. The collected studies support the impact of physically active academic lessons on each area of interest. If these data can be replicated, it suggests that teachers might find these lessons of benefit to their primary role as educators, which should ease dissemination of these and other physically active lessons in elementary schools. Copyright © 2011 Elsevier Inc. All rights reserved.

Space shuttle configuration accounting functional design specification

Science.gov (United States)

1974-01-01

An analysis is presented of the requirements for an on-line automated system which must be capable of tracking the status of requirements and engineering changes and of providing accurate and timely records. The functional design specification provides the definition, description, and character length of the required data elements and the interrelationship of data elements to adequately track, display, and report the status of active configuration changes. As changes to the space shuttle program levels II and III configuration are proposed, evaluated, and dispositioned, it is the function of the configuration management office to maintain records regarding changes to the baseline and to track and report the status of those changes. The configuration accounting system will consist of a combination of computers, computer terminals, software, and procedures, all of which are designed to store, retrieve, display, and process information required to track proposed and proved engineering changes to maintain baseline documentation of the space shuttle program levels II and III.

Lesson Study and History Education

Science.gov (United States)

Halvorsen, Anne-Lise; Kesler Lund, Alisa

2013-01-01

This article examines the experiences of a group of fifth-grade teachers who used lesson study, a teacher-driven form of professional development, to teach history in a project supported by a Teaching American History Grant. The project addressed the following questions: What does a lesson study cycle for history education look like? What…

Habitability and Human Factors: Lessons Learned in Long Duration Space Flight

Science.gov (United States)

Baggerman, Susan D.; Rando, Cynthia M.; Duvall, Laura E.

2006-01-01

This study documents the investigation of qualitative habitability and human factors feedback provided by scientists, engineers, and crewmembers on lessons learned from the ISS Program. A thorough review and understanding of this data is critical in charting NASA's future path in space exploration. NASA has been involved in ensuring that the needs of crewmembers to live and work safely and effectively in space have been met throughout the ISS Program. Human factors and habitability data has been collected from every U.S. crewmember that has resided on the ISS. The knowledge gained from both the developers and inhabitants of the ISS have provided a significant resource of information for NASA and will be used in future space exploration. The recurring issues have been tracked and documented; the top 5 most critical issues have been identified from this data. The top 5 identified problems were: excessive onsrbit stowage; environment; communication; procedures; and inadequate design of systems and equipment. Lessons learned from these issues will be used to aid in future improvements and developments to the space program. Full analysis of the habitability and human factors data has led to the following recommendations. It is critical for human factors to be involved early in the design of space vehicles and hardware. Human factors requirements need to be readdressed and redefined given the knowledge gained during previous ISS and long-duration space flight programs. These requirements must be integrated into vehicle and hardware technical documentation and consistently enforced. Lastly, space vehicles and hardware must be designed with primary focus on the user/operator to successfully complete missions and maintain a safe working environment. Implementation of these lessons learned will significantly improve NASA's likelihood of success in future space endeavors.

Value pricing pilot program : lessons learned

Science.gov (United States)

2008-08-01

This "Lessons Learned Report" provides a summary of projects sponsored by the Federal Highway Administration's (FHWA's) Congestion and Value Pricing Pilot Programs from 1991 through 2006 and draws lessons from a sample of projects with the richest an...

Students’ motivation in a disc golf-lesson and a soccer-lesson: An experimental study in the Physical Education setting

Directory of Open Access Journals (Sweden)

Kristian Vernegaard

2017-09-01

Full Text Available One of the purposes of physical education (PE in both Norway and Denmark is that PE should inspire to a lifelong active lifestyle. Based on the self-determination theory, the aim of the present study was to compare students’ intrinsic motivation, extrinsic motivation, and perceived competence in a lifestyle sport inspired PE-lesson (disc golf to a traditional PE-lesson (soccer and general PE. In addition, we aimed to investigate whether differences in motivation and perceived competence were conditional of the students’ relative attitude toward PE. The result of the study revealed that perceived competence was higher in the disc golf-lesson compared to the soccer-lesson and general PE. No overall differences in intrinsic motivation were found. However, when investigating differences in intrinsic motivation according to the students’ relative attitude toward PE, the results indicated that the students with a negative attitude toward PE was significantly more intrinsically motivated in disc golf-lesson compared to soccer-lesson and general PE. The findings may be seen as further recommendations to physical educators to vary the activity choices in physical education classes.

Engaging Gatekeepers, Optimizing Decision Making, and Mitigating Bias: Design Specifications for Systemic Diversity Interventions.

Science.gov (United States)

Vinkenburg, Claartje J

2017-06-01

In this contribution to the Journal of Applied Behavioral Science Special Issue on Understanding Diversity Dynamics in Systems: Social Equality as an Organization Change Issue, I develop and describe design specifications for systemic diversity interventions in upward mobility career systems, aimed at optimizing decision making through mitigating bias by engaging gatekeepers. These interventions address the paradox of meritocracy that underlies the surprising lack of diversity at the top of the career pyramid in these systems. I ground the design specifications in the limited empirical evidence on "what works" in systemic interventions. Specifically, I describe examples from interventions in academic settings, including a bias literacy program, participatory modeling, and participant observation. The design specifications, paired with inspirational examples of successful interventions, should assist diversity officers and consultants in designing and implementing interventions to promote the advancement to and representation of nondominant group members at the top of the organizational hierarchy.

BBN based Quantitative Assessment of Software Design Specification

International Nuclear Information System (INIS)

Eom, Heung-Seop; Park, Gee-Yong; Kang, Hyun-Gook; Kwon, Kee-Choon; Chang, Seung-Cheol

2007-01-01

Probabilistic Safety Assessment (PSA), which is one of the important methods in assessing the overall safety of a nuclear power plant (NPP), requires quantitative reliability information of safety-critical software, but the conventional reliability assessment methods can not provide enough information for PSA of a NPP. Therefore current PSA which includes safety-critical software does not usually consider the reliability of the software or uses arbitrary values for it. In order to solve this situation this paper proposes a method that can produce quantitative reliability information of safety-critical software for PSA by making use of Bayesian Belief Networks (BBN). BBN has generally been used to model an uncertain system in many research fields including the safety assessment of software. The proposed method was constructed by utilizing BBN which can combine the qualitative and the quantitative evidence relevant to the reliability of safety critical software. The constructed BBN model can infer a conclusion in a formal and a quantitative way. A case study was carried out with the proposed method to assess the quality of software design specification (SDS) of safety-critical software that will be embedded in a reactor protection system. The intermediate V and V results of the software design specification were used as inputs to the BBN model

An integrated in silico approach to design specific inhibitors targeting human poly(a-specific ribonuclease.

Directory of Open Access Journals (Sweden)

Dimitrios Vlachakis

Full Text Available Poly(A-specific ribonuclease (PARN is an exoribonuclease/deadenylase that degrades 3'-end poly(A tails in almost all eukaryotic organisms. Much of the biochemical and structural information on PARN comes from the human enzyme. However, the existence of PARN all along the eukaryotic evolutionary ladder requires further and thorough investigation. Although the complete structure of the full-length human PARN, as well as several aspects of the catalytic mechanism still remain elusive, many previous studies indicate that PARN can be used as potent and promising anti-cancer target. In the present study, we attempt to complement the existing structural information on PARN with in-depth bioinformatics analyses, in order to get a hologram of the molecular evolution of PARNs active site. In an effort to draw an outline, which allows specific drug design targeting PARN, an unequivocally specific platform was designed for the development of selective modulators focusing on the unique structural and catalytic features of the enzyme. Extensive phylogenetic analysis based on all the publicly available genomes indicated a broad distribution for PARN across eukaryotic species and revealed structurally important amino acids which could be assigned as potentially strong contributors to the regulation of the catalytic mechanism of PARN. Based on the above, we propose a comprehensive in silico model for the PARN's catalytic mechanism and moreover, we developed a 3D pharmacophore model, which was subsequently used for the introduction of DNP-poly(A amphipathic substrate analog as a potential inhibitor of PARN. Indeed, biochemical analysis revealed that DNP-poly(A inhibits PARN competitively. Our approach provides an efficient integrated platform for the rational design of pharmacophore models as well as novel modulators of PARN with therapeutic potential.

Job task analysis: lessons learned from application in course development

International Nuclear Information System (INIS)

Meredith, J.B.

1985-01-01

Those at Public Service Electric and Gas Company are committed to a systematic approach to training known as Instructional System Design. Our performance-based training emphasizes the ISD process to have trainees do or perform the task whenever and wherever it is possible for the jobs for which they are being trained. Included is a brief description of our process for conducting and validating job analyses. The major thrust of this paper is primarily on the lessons that we have learned in the design and development of training programs based upon job analysis results

Learning to observe mathematical learning in lesson studies

DEFF Research Database (Denmark)

Rasmussen, Klaus; Østergaard, Camilla Hellsten; Foss, Kristian Kildemoes

2016-01-01

This poster deals with lesson study (LS) in pre-service teacher education. In particular how to prepare for, carry out, and reflect upon, observations of pupil learning. Observation is of crucial importance to the lesson study process, and here we present a study of observation features which ena...... enable or hinder fruitful lesson study. While substantial research has been carried out in the general field of bserving pupils’ learning processes and teachers’ pedagogical practice, little is known about this in the particular setting of lesson study....

Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

Science.gov (United States)

Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

2008-05-01

Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

Licence renewal in the United States - enhancing the process through lessons learned

International Nuclear Information System (INIS)

Walters, D.J.

2000-01-01

The Nuclear Energy Institute (NEI) is the Washington based policy organisation representing the broad and varied interests of the diverse nuclear energy industry. It comprises nearly 300 corporate members in 15 countries with a budget last year of about USD 26.5 million. It has been working for 10 years with the Nuclear Regulatory Commission (NRC), colleagues in the industry and others to demonstrate that license renewal is a safe and workable process. The first renewed license was issued on 24 March to BGE for the the Calvert Cliffs plant. One month later the NRC issued the renewed license for the Ocoenne plant. By 'Enhancing the process through lessons learned', we mean reducing the uncertainty in the license renewal process. This is achieved through lessons learned from the net wave of applicants and the reviews of the Calvert Cliffs and Ocoenne applications. Three areas will be covered: - Incentive for minimising uncertainty as industry interest in license renewal is growing dramatically. - Rigorous reviews by Nuclear Regulatory Commission assure continued safety: process put in place by the Nuclear Regulatory Commission to assure safety throughout the license renewal term, specifically areas where the lessons learned suggest improvements can be made. - Lessons learned have identified enhancements to the process: numerous benefits associated with renewal of nuclear power plant licenses for consumers of electricity, the environment, the nuclear operating companies and the nation. (author)

Hydrogen Fuel Cell Analysis: Lessons Learned from Stationary Power Generation Final Report

Energy Technology Data Exchange (ETDEWEB)

Scott E. Grasman; John W. Sheffield; Fatih Dogan; Sunggyu Lee; Umit O. Koylu; Angie Rolufs

2010-04-30

This study considered opportunities for hydrogen in stationary applications in order to make recommendations related to RD&D strategies that incorporate lessons learned and best practices from relevant national and international stationary power efforts, as well as cost and environmental modeling of pathways. The study analyzed the different strategies utilized in power generation systems and identified the different challenges and opportunities for producing and using hydrogen as an energy carrier. Specific objectives included both a synopsis/critical analysis of lessons learned from previous stationary power programs and recommendations for a strategy for hydrogen infrastructure deployment. This strategy incorporates all hydrogen pathways and a combination of distributed power generating stations, and provides an overview of stationary power markets, benefits of hydrogen-based stationary power systems, and competitive and technological challenges. The motivation for this project was to identify the lessons learned from prior stationary power programs, including the most significant obstacles, how these obstacles have been approached, outcomes of the programs, and how this information can be used by the Hydrogen, Fuel Cells & Infrastructure Technologies Program to meet program objectives primarily related to hydrogen pathway technologies (production, storage, and delivery) and implementation of fuel cell technologies for distributed stationary power. In addition, the lessons learned address environmental and safety concerns, including codes and standards, and education of key stakeholders.

Climate change in the classroom: Reaching out to middle school students through science and math suitcase lessons

Science.gov (United States)

Jacobo, A. C.; Collay, R.; Harris, R. N.; de Silva, L.

2011-12-01

We have formed a link between the Increasing Diversity in Earth Sciences (IDES) program with the Science and Math Investigative Learning Experiences (SMILE) program, both at Oregon State University. The IDES mission is to strengthen the understanding of Earth Sciences and their relevance to society among broad and diverse segments of the population and the SMILE mission is to provide science and math enrichment for underrepresented and other educationally underserved students in grades 4-12. Traditionally, underserved schools do not have enough time or resources to spend on science and mathematics. Furthermore, numerous budget cuts in many Oregon school districts have negatively impacted math and science cirriculum. To combat this trend we have designed suitcase lessons in climate change that can be carried to a number of classrooms. These lesson plans are scientifically rich and economically attractive. These lessons are designed to engage students in math and science through climate change presentations, group discussions, and hands-on activities. Over the past year we have familiarized ourselves with the academic ability of sixth and seventh graders through in-class observation in Salem Oregon. One of the suit case lessons we developed focuses on climate change by exploring the plight of polar bears in the face of diminishing sea ice. Our presentation will report the results of this activity.

Space reactor safety, 1985--1995 lessons learned

International Nuclear Information System (INIS)

Marshall, A.C.

1995-01-01

Space reactor safety activities and decisions have evolved over the last decade. Important safety decisions have been made in the SP-100, Space Exploration Initiative, NEPSTP, SNTP, and Bimodal Space Reactor programs. In addition, international guidance on space reactor safety has been instituted. Space reactor safety decisions and practices have developed in the areas of inadvertent criticality, reentry, radiological release, orbital operation, programmatic, and policy. In general, the lessons learned point out the importance of carefully reviewing previous safety practices for appropriateness to space nuclear programs in general and to the specific mission under consideration

Space reactor safety, 1985--1995 lessons learned

Energy Technology Data Exchange (ETDEWEB)

Marshall, A.C.

1995-12-31

Space reactor safety activities and decisions have evolved over the last decade. Important safety decisions have been made in the SP-100, Space Exploration Initiative, NEPSTP, SNTP, and Bimodal Space Reactor programs. In addition, international guidance on space reactor safety has been instituted. Space reactor safety decisions and practices have developed in the areas of inadvertent criticality, reentry, radiological release, orbital operation, programmatic, and policy. In general, the lessons learned point out the importance of carefully reviewing previous safety practices for appropriateness to space nuclear programs in general and to the specific mission under consideration.

Specification of Behavioural Requirements within Compositional Multi-Agent System Design

OpenAIRE

Herlea, D.E.; Jonker, C.M.; Treur, J.; Wijngaards, N.J.E.

1999-01-01

In this paper it is shown how informal and formal specification of behavioural requirements and scenarios for agents and multi-agent systems can be integrated within multi-agent system design. In particular, it is addressed how a compositional

INTERCULTURAL FEATURES AND THE THEME OF TRAVELLING IN BILINGUAL MATHEMATICS LESSONS

Directory of Open Access Journals (Sweden)

Zuzana Naštická

2016-08-01

Full Text Available The present qualitative research is focused on bilingual mathematics education. The research presents findings of a case study of one bilingual Slovak and English mathematics 40-minute lesson within an after school elective bilingual mathematics course running weekly since October, 2015. The lesson took place in March, 2016, and was attended by nine learners aged 12-13, eight boys and one girl. The learners are cases of successive school additive bilingual education. The elective course as a whole is a case of immerse bilingual educational programme. In terms of sociolinguistic settings, the course lessons are cases of bilingual education with external second language. The researcher designed and realized the course lessons in terms of CLIL approach, i.e. Content and Language Integrated Learning. The main aim of the case study was to examine if bilingual mathematics instruction does or does not prevent learners from solving math word problems. Secondly, the analysis of transcription of the lesson audio-record served for identification of intercultural features which might hinder the learning process. The analysis of the transcribed audio-record indicates that the bilingual context did not prevent students from solving math word problems, although each of the students worked at their individual rate. On the other hand, some students were confused by the comma as a thousands-separator in multi-digit numbers, and this actually hindered their learning and problem solving process. This fact has been identified as an intercultural difference which had to be explicitly explained to the students. In order to lessen the possible negative influences of bilingual context on mathematics education, teachers need to predict students’ responses to various intercultural differences which students are unfamiliar with.

A Lesson Plan Incorporating Collaborative Strategic Reading

Institute of Scientific and Technical Information of China (English)

陈江萍

2017-01-01

This essay is going to have an in-depth analysis of the Collaborative Strategic Reading, a four-step reading comprehen-sion strategy popular in the Western classrooms. It will start with some brief introduction about this instructional approach in company with its theoretical rationale and research evidence for its effectiveness of improving learners 'reading competence. Fo-cused on the previewing skill, the first step of the reading instruction, a modified lesson plan is designed in the Chinese high school setting, followed by justification of the major elements of the plan, and some practical implications.

A Lesson Plan Incorporating Collaborative Strategic Reading

Institute of Scientific and Technical Information of China (English)

陈江萍

2017-01-01

This essay is going to have an in-depth analysis of the Collaborative Strategic Reading, a four-step reading comprehen?sion strategy popular in the Western classrooms. It will start with some brief introduction about this instructional approach in company with its theoretical rationale and research evidence for its effectiveness of improving learners 'reading competence. Fo?cused on the previewing skill, the first step of the reading instruction, a modified lesson plan is designed in the Chinese high school setting, followed by justification of the major elements of the plan, and some practical implications.

LESSONS OF SOCIAL CO-DESIGN FOR INCLUSIVE DESIGN

DEFF Research Database (Denmark)

Herriott, Richard

2015-01-01

This article concerns how designers sought to create improved social relations among severely disabled residents in a care home in Denmark. Rather than to rely on paid help, the care home management wanted to increase the number of voluntary friendships between the residents of the home and members...

Lessons learned from the Three Mile Island Unit 2 Advisory Panel

International Nuclear Information System (INIS)

Lach, D.; Bolton, P.; Durbin, N.; Harty, R.

1994-08-01

In response to public concern about the cleanup of the Three Mile Island, Unit 2 (TMI-2) facility after an accident on March 28, 1979 involving a loss of reactor coolant and subsequent damage to the reactor fuel, twelve citizens were asked to serve on an independent Advisory Panel to consult with the Nuclear Regulatory Commission (NRC) on the decontamination and cleanup of the facility. The panel met 78 times over a period of thirteen years, holding public meetings in the vicinity of TMI-2 and meeting regularly with NRC Commissioners in Washington, DC. This report describes the results of a project designed to identify and describe the lessons learned from the Advisory Panel and place those lessons in the context of what we generally know about citizen advisory groups. A summary of the empirical literature on citizen advisory panels is followed by a brief history of the TMI-2 Advisory Panel. The body of the report contains the analysis of the lessons learned, preliminary conclusions about the effectiveness of the Panel, and implications for the NRC in the use of advisory panels. Data for the report include meeting transcripts and interviews with past and present Panel participants

Enhancing pre-service physics teachers' creative thinking skills through HOT lab design

Science.gov (United States)

Malik, Adam; Setiawan, Agus; Suhandi, Andi; Permanasari, Anna

2017-08-01

A research on the implementation of HOT (Higher Order Thinking) Laboratory has been carried out. This research is aimed to compare increasing of creative thinking skills of pre-service physics teachers who receive physics lesson with HOT Lab and with verification lab for the topic of electric circuit. This research used a quasi-experiment methods with control group pretest-posttest design. The subject of the research is 40 Physics Education pre-service physics teachers of UIN Sunan Gunung Djati Bandung. Research samples were selected by class random sampling technique. Data on pre-service physics teachers' creative thinking skills were collected using test of creative thinking skills in the form of essay. The results of the research reveal that average of N-gain of creative thinking skills are for pre-service physics teachers who received lesson with HOT Lab design and for pre-service physics teachers who received lesson with verification lab, respectively. Therefore, we conclude that application of HOT Lab design is more effective to increase creative thinking skills in the lesson of electric circuit.

Lessons learned in over 100 zebra mussel control applications at industrial facilities

Energy Technology Data Exchange (ETDEWEB)

McGough, C.M.; Gilland, P.H.; Muia, R.A. [Calgon Corp., Pittsburgh, PA (United States)

1998-12-31

Since their introduction into US waterways, Zebra Mussels (Dreissena polymorphae) have spread rapidly throughout the Great Lakes and Mississippi regions. These mussels have continued to colonize the intake pipes of industrial water supplies and water distribution systems throughout the affected areas. Their colonization has compromised plant safety and production efficiency, and steadily increased costs to water users. The design of each industrial plant water distribution system is unique. A comprehensive zebra mussel control strategy using the best available options must be considered in each specific situation. This paper discusses the successful use of one strategy (a quaternary ammonia-based molluscicide) in the battle against zebra mussels. The commercial life cycle of an industrial molluscicide began with initial toxicity screening in the laboratory. The evaluation continued at plant sites through field trials and applications. Lessons learned from these experiences helped direct the efforts toward the development of a second generation program.

Engineering Encounters: Minding Design Missteps

Science.gov (United States)

Crismond, David; Gellert, Laura; Cain, Ryan; Wright, Shequana

2013-01-01

The "Next Generation Science Standards" (NGSS) (Achieve Inc. 2013) asks teachers to give engineering design equal standing with scientific inquiry in their science lessons. This article asks the following questions: What do engineering design practices look like, and how do you assess them? How similar and different is engineering design…

Design for Safety - The Ares Launch Vehicles Paradigm Change

Science.gov (United States)

Safie, Fayssal M.; Maggio, Gaspare

2010-01-01

The lessons learned from the S&MA early involvement in the Ares I launch vehicle design phases proved that performing an in-line function jointly with engineering is critical for S&MA to have an effective role in supporting the system, element, and component design. These lessons learned were used to effectively support the Ares V conceptual design phase and planning for post conceptual design phases. The Top level Conceptual LOM assessment for Ares V performed by the S&MA community jointly with the engineering Advanced Concept Office (ACO) was influential in the final selection of the Ares V system configuration. Post conceptual phase, extensive reliability effort should be planned to support future Heavy Lift Launch Vehicles (HLLV) design. In-depth reliability analysis involving the design, manufacturing, and system engineering communities is critical to understand design and process uncertainties and system integrated failures.

Mini-Lessons on Language (The Round Table).

Science.gov (United States)

English Journal, 1993

1993-01-01

Describes several successful lessons that provide students with new awareness of the English language. Includes lessons focusing on language change, onomatopoeia, slang, word origin, dialect, and language functions. (MM)

Kineto-dynamic design optimisation for vehicle-specific seat-suspension systems

Science.gov (United States)

Shangguan, Wen-Bin; Shui, Yijie; Rakheja, Subhash

2017-11-01

Designs and analyses of seat-suspension systems are invariably performed considering effective vertical spring rate and damping properties, while neglecting important contributions due to kinematics of the widely used cross-linkage mechanism. In this study, a kineto-dynamic model of a seat-suspension is formulated to obtain relations for effective vertical suspension stiffness and damping characteristics as functions of those of the air spring and the hydraulic damper, respectively. The proposed relations are verified through simulations of the multi-body dynamic model of the cross-linkage seat-suspension in the ADAMS platform. The validity of the kineto-dynamic model is also demonstrated through comparisons of its vibration transmission response with the experimental data. The model is used to identify optimal air spring coordinates to attain nearly constant natural frequency of the suspension, irrespective of the seated body mass and seated height. A methodology is further proposed to identify optimal damping requirements for vehicle-specific suspension designs to achieve minimal seat effective amplitude transmissibility (SEAT) and vibration dose value (VDV) considering vibration spectra of different classes of earthmoving vehicles. The shock and vibration isolation performance potentials of the optimal designs are evaluated under selected vehicle vibration superimposed with shock motions. Results show that the vehicle-specific optimal designs could provide substantial reductions in the SEAT and VDV values for the vehicle classes considered.

Breaking the deadlock: lessons from cross-border spatial projects in Flanders and the Netherlands

NARCIS (Netherlands)

de Vries, J.

2008-01-01

This paper explores the specific characteristics of decision-making in cross-border spatial projects and draws some lessons for European territorial cooperation. This is done by examining three major infrastructure projects between the Netherlands and Flanders: the construction of a high-speed rail

What Is a Scientific Experiment? The Impact of a Professional Development Course on Teachers' Ability to Design an Inquiry-Based Science Curriculum

Science.gov (United States)

Pérez, María del Carmen B.; Furman, Melina

2016-01-01

Designing inquiry-based science lessons can be a challenge for secondary school teachers. In this study we evaluated the development of in-service teachers' lesson plans as they took part in a 10-month professional development course in Peru which engaged teachers in the design of inquiry-based lessons. At the beginning, most teachers designed…

Informing General CSCW Product Development through Cooperative Design in Specific Work Domains

DEFF Research Database (Denmark)

Grønbæk, Kaj; Mogensen, Preben Holst

1997-01-01

sharing of materials in the engineering domain. In our project, a single engineering company (Great Belt Link Ltd.) was chosen as the user organization. The paper summarizes the process from observational studies, over a future workshop and cooperative prototyping activities, to a pilot installation. We...... describe how these activities informed the general hypermedia framework and application design. Use scenarios and prototypes with example data from the users‘ daily work were used as sources both to trigger design ideas and new insights regarding work practice. Common participants in specific activities...... and general development activities supported transfer of work domain knowledge into general features of the product being developed. Mutual challenging characterized the interaction between specific cooperative analysis and design activities and general development activities. Prototypes, scenarios, materials...

When innovative instructional designs are too innovative

DEFF Research Database (Denmark)

Kjærgaard, Thomas; Wahl, Christian

2015-01-01

and it was developed to include, motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students. The new instructional design utilized teacher-produced video-clips to qualify the students learning in the preparation...... for the lessons and new pedagogical activities during lessons to make the learning process more situated. The video-clips should also include more students through scaffolding the academic reading with video-clips. However, the outcome was not as planned. The students didn’t recognize the video......This paper presents a study of what happens when innovation of an instructional design is too innovative. The study investigates an implementation process of a new instructional design in nursing education. The new instructional design should be a step away for a functionalist approach to learning...

"The State of Chihuahua", Lesson Plan for "Cultural Unit: Focus on Mexico."

Science.gov (United States)

Llewellyn, Marianne

This lesson plan was designed for students in Montana schools. The objectives for this culture unit are having: (1) students recognize the similarities between their home stat of Montana and the Mexican state of Chihuahua; (2) students learn about features unique to Chihuahua; and (3) students create an advertising brochure marketing Chihuahua to…

Nutrition labelling is a trade policy issue: lessons from an analysis of specific trade concerns at the World Trade Organization.

Science.gov (United States)

Thow, Anne Marie; Jones, Alexandra; Hawkes, Corinna; Ali, Iqra; Labonté, Ronald

2017-01-12

Interpretive nutrition labels provide simplified nutrient-specific text and/or symbols on the front of pre-packaged foods, to encourage and enable consumers to make healthier choices. This type of labelling has been proposed as part of a comprehensive policy response to the global epidemic of non-communicable diseases. However, regulation of nutrition labelling falls under the remit of not just the health sector but also trade. Specific Trade Concerns have been raised at the World Trade Organization's Technical Barriers to Trade Committee regarding interpretive nutrition labelling initiatives in Thailand, Chile, Indonesia, Peru and Ecuador. This paper presents an analysis of the discussions of these concerns. Although nutrition labelling was identified as a legitimate policy objective, queries were raised regarding the justification of the specific labelling measures proposed, and the scientific evidence for effectiveness of such measures. Concerns were also raised regarding the consistency of the measures with international standards. Drawing on policy learning theory, we identified four lessons for public health policy makers, including: strategic framing of nutrition labelling policy objectives; pro-active policy engagement between trade and health to identify potential trade issues; identifying ways to minimize potential 'practical' trade concerns; and engagement with the Codex Alimentarius Commission to develop international guidance on interpretative labelling. This analysis indicates that while there is potential for trade sector concerns to stifle innovation in nutrition labelling policy, care in how interpretive nutrition labelling measures are crafted in light of trade commitments can minimize such a risk and help ensure that trade policy is coherent with nutrition action. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Pedagogical Content Knowledge-Guided Lesson Study: Effects on Teacher Competence and Students’ Achievement in Chemistry

Directory of Open Access Journals (Sweden)

John Lou S. Lucenario

2016-01-01

Full Text Available This study aimed to investigate the effectiveness of Pedagogical Content Knowledge-Guided Lesson Study (PCKLS as an intervention to develop PCK competencies among teachers and consequently enhance student achievement in terms of conceptual understanding and problem-solving skills. Using quasi-experimental design, teacher competencies and student achievement in the PCKLS group and the conventional group were compared. In the PCKLS group, the intervention involved planning the lesson by the research team, teaching the planned lesson while PCK observations were made by the researcher and another teacher from the group, including a feedback meeting, implementing the improvements in the reteach stage of the lesson study cycle by another teacher from the research team, and, finally, revising lesson plans based on the consolidated suggestions for improvement. Analyses of data showed that there was a significant difference in the science teacher competencies of the PCKLS group teacher respondents compared to those of the conventional group. Also, student respondents showed a significant increase on mean scores in terms of conceptual understanding and problem-solving skills. Therefore, it was concluded that PCKLS was an effective method to develop the teachers’ PCK competencies and student achievement in terms of conceptual understanding and problem solving. This study recommends that this intervention be used across chemistry topics and in other science classes such as Biology, Earth and Environmental Science, Physics, and Mathematics.

Improving Mathematics Teaching as Deliberate Practice through Chinese Lesson Study

Science.gov (United States)

Huang, Rongjin; Prince, Kyle M.; Barlow, Angela T.

2017-01-01

This study examined how a ninth grade teacher improved an Algebra I lesson through a lesson study approach. We used multiple data sources to investigate the improvement of the lesson towards student-centered mathematics instruction, perceived benefits of the teacher, and factors associated with the improvement of teaching. The lesson group…

Craft Lessons: Teaching Writing K-8. Second Edition

Science.gov (United States)

Fletcher, Ralph; Portalupi, JoAnn

2007-01-01

Since its publication in 1998 Craft Lessons has become a mainstay of writing teachers, both new and experienced. Practical lessons--each printed on one page--and the instructional language geared to three grade-level groupings: K-2, 3-4, and 5-8 are contained in this book. In the decade since Craft Lessons' publication the world has changed in…

Anticipating students' reasoning and planning prompts in structured problem-solving lessons

Science.gov (United States)

Vale, Colleen; Widjaja, Wanty; Doig, Brian; Groves, Susie

2018-02-01

Structured problem-solving lessons are used to explore mathematical concepts such as pattern and relationships in early algebra, and regularly used in Japanese Lesson Study research lessons. However, enactment of structured problem-solving lessons which involves detailed planning, anticipation of student solutions and orchestration of whole-class discussion of solutions is an ongoing challenge for many teachers. Moreover, primary teachers have limited experience in teaching early algebra or mathematical reasoning actions such as generalising. In this study, the critical factors of enacting the structured problem-solving lessons used in Japanese Lesson Study to elicit and develop primary students' capacity to generalise are explored. Teachers from three primary schools participated in two Japanese Lesson Study teams for this study. The lesson plans and video recordings of teaching and post-lesson discussion of the two research lessons along with students' responses and learning are compared to identify critical factors. The anticipation of students' reasoning together with preparation of supporting and challenging prompts was critical for scaffolding students' capacity to grasp and communicate generality.

Conceptual design of small-sized HTGR system (1). Major specifications and system designs

International Nuclear Information System (INIS)

Ohashi, Hirofumi; Sato, Hiroyuki; Tazawa, Yujiro; Yan, Xing L.; Tachibana, Yukio

2011-06-01

Japan Atomic Energy Agency (JAEA) has started a conceptual design of a 50MWt small-sized high temperature gas cooled reactor (HTGR) for steam supply and electricity generation (HTR50S), which is a first-of-kind of the commercial plant or a demonstration plant of a small-sized HTGR system for steam supply to the industries and district heating and electricity generation by a steam turbine, to deploy in developing countries in the 2030s. The design philosophy is that the HTR50S is a high advanced reactor, which is reducing the R and D risk based on the HTTR design, upgrading the performance and reducing the cost for commercialization by utilizing the knowledge obtained by the HTTR operation and the GTHTR300 design. The major specifications of the HTR50S were determined and targets of the technology demonstration using the HTR50S (e.g., the increasing the power density, reduction of the number of uranium enrichment in the fuel, increasing the burn up, side-by-side arrangement between the reactor pressure vessel and the steam generator) were identified. In addition, the system design of HTR50S, which offers the capability of electricity generation, cogeneration of electricity and steam for a district heating and industries, was performed. Furthermore, a market size of small-sized HTGR systems was investigated. (author)

The verification of DRAGON: progress and lessons learned

International Nuclear Information System (INIS)

Marleau, G.

2002-01-01

The general requirements for the verification of the legacy code DRAGON are somewhat different from those used for new codes. For example, the absence of a design manual for DRAGON makes it difficult to confirm that the each part of the code performs as required since these requirements are not explicitly spelled out for most of the DRAGON modules. In fact, this conformance of the code can only be assessed, in most cases, by making sure that the contents of the DRAGON data structures, which correspond to the output generated by a module of the code, contains the adequate information. It is also possible in some cases to use the self-verification options in DRAGON to perform additional verification or to evaluate, using an independent software, the performance of specific functions in the code. Here, we will describe the global verification process that was considered in order to bring DRAGON to an industry standard tool-set (IST) status. We will also discuss some of the lessons we learned in performing this verification and present some of the modification to DRAGON that were implemented as a consequence of this verification. (author)

International experience in the implementation of the lessons learned from the Three Mile Island incident

International Nuclear Information System (INIS)

1983-08-01

This document consists of two parts and an Appendix. Part I provides a summary of worldwide experiences and subsequent recommendations regarding the implementation of the Three Mile Island-Unit 2 incident lessons learned. Part II gives in a summary fashion, specific responses and actions of the mentioned countries and international organizations as categorized into ten (10) subject areas. The Appendix, on the other hand, contains examples of the experiences of Brazil, Germany (F.R.), Hungary, and the Philippines, on the implementation of TMI lessons learned. This document should be useful to countries with nuclear power development programmes in that it provides a means for comparison of their actions with others. For countries which are embarking on their first nuclear power project, the document should provide a useful reference for specific TMI-related issues that need to be considered in their nuclear programmes

Lessons Learned In Aerosol Monitoring With The RASA

International Nuclear Information System (INIS)

Forrester, Joel B.; Bowyer, Ted W.; Carty, Fitz; Comes, Laura; Eslinger, Paul W.; Greenwood, Lawrence R.; Haas, Derek A.; Hayes, James C.; Kirkham, Randy R.; Lepel, Elwood A.; Litke, Kevin E.; Miley, Harry S.; Morris, Scott J.; Schrom, Brian T.; Van Davelaar, Peter; Woods, Vincent T.

2011-01-01

The Radionuclide Aerosol Sampler/Analyzer (RASA) is an automated aerosol collection and analysis system designed by Pacific Northwest National Laboratory (PNNL) in the 1990's and is deployed in several locations around the world as part of the International Monitoring System (IMS) required under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The RASA operates unattended, save for regularly scheduled maintenance, iterating samples through a three-step process on a 24-hour interval. In its 15-year history, much has been learned from the operation and maintenance of the RASA that can benefit engineering updates or future aerosol systems. On 11 March 2011, a 9.0 magnitude earthquake and tsunami rocked the eastern coast of Japan, resulting in power loss and cooling failures at the Daiichi nuclear power plants in Fukushima Prefecture. Aerosol collections were conducted with the RASA in Richland, WA. We present a summary of the lessons learned over the history of the RASA, including lessons taken from the Fukushima incident, regarding the RASA IMS stations operated by the United States.

Design specifications for ASME B and PV Code Section III nuclear class 1 piping

International Nuclear Information System (INIS)

Richardson, J.A.

1978-01-01

ASME B and PV Code Section III code regulations for nuclear piping requires that a comprehensive Design Specification be developed for ensuring that the design and installation of the piping meets all code requirements. The intent of this paper is to describe the code requirements, discuss the implementation of these requirements in a typical Class 1 piping design specification, and to report on recent piping failures in operating light water nuclear power plants in the US. (author)

Designing Domain-Specific Heterogeneous Architectures from Dataflow Programs

Directory of Open Access Journals (Sweden)

Süleyman Savas

2018-04-01

Full Text Available The last ten years have seen performance and power requirements pushing computer architectures using only a single core towards so-called manycore systems with hundreds of cores on a single chip. To further increase performance and energy efficiency, we are now seeing the development of heterogeneous architectures with specialized and accelerated cores. However, designing these heterogeneous systems is a challenging task due to their inherent complexity. We proposed an approach for designing domain-specific heterogeneous architectures based on instruction augmentation through the integration of hardware accelerators into simple cores. These hardware accelerators were determined based on their common use among applications within a certain domain.The objective was to generate heterogeneous architectures by integrating many of these accelerated cores and connecting them with a network-on-chip. The proposed approach aimed to ease the design of heterogeneous manycore architectures—and, consequently, exploration of the design space—by automating the design steps. To evaluate our approach, we enhanced our software tool chain with a tool that can generate accelerated cores from dataflow programs. This new tool chain was evaluated with the aid of two use cases: radar signal processing and mobile baseband processing. We could achieve an approximately 4 × improvement in performance, while executing complete applications on the augmented cores with a small impact (2.5–13% on area usage. The generated accelerators are competitive, achieving more than 90% of the performance of hand-written implementations.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials.

Science.gov (United States)

Zadpoor, Amir A

2017-07-25

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

Directory of Open Access Journals (Sweden)

Amir A. Zadpoor

2017-07-01

Full Text Available Recent advances in additive manufacturing (AM techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

Professor's Page: Do Demonstration Lessons Work?

Science.gov (United States)

Clarke, Doug

2011-01-01

As part of a large research and professional development project funded by the Catholic Education Office Melbourne (CEOM), called "Contemporary Teaching and Learning of Mathematics," the ACU team has been leading demonstration lessons. There is certainly not universal agreement on the worth of demonstration lessons in the mathematics…

Design Thinking and the School Library

Science.gov (United States)

Coleman, Mary Catherine

2016-01-01

This past school year, the author set out to develop lessons that incorporated the design thinking process into her literature exploration curriculum in the school library. Design thinking is a term that the author has heard many times over the past few years in the context of education. Design thinking has been incorporated into the school…

Defense Language Institute Russian Basic Course. Volumes XXVIII, Lessons 131-140. Volume XXX, Lessons 151-159.

Science.gov (United States)

Defense Language Inst., Washington, DC.

The 19 lessons in these two volumes are intended for the advanced phase of a 159-lesson intensive audiolingual basic Russian course developed recently by the Defense Language Institute to train native speakers of English to a Level 3 second language proficiency. These third and fifth volumes contain such features as (1) texts on the Russian Civil…

Children's Satisfaction with Private Music Lessons.

Science.gov (United States)

Rife, Nora A.; Shnek, Zachary M.; Lauby, Jennifer L.; Lapidus, Leah Blumberg

2001-01-01

Determines the language children use to express their feelings of satisfaction with private music lessons. Offers a list of statements from children about private music lessons to be used to assess those feelings. Discusses the effects of age, gender, and musical instruments on satisfaction for music educators. Includes references. (DAJ)

Human Spaceflight Conjunction Assessment: Lessons Learned

Science.gov (United States)

Smith, Jason T.

2011-01-01

This viewgraph presentation reviews the process of a human space flight conjunction assessment and lessons learned from the more than twelve years of International Space Station (ISS) operations. Also, the application of these lessons learned to a recent ISS conjunction assessment with object 84180 on July 16, 2009 is also presented.

Home Kitchen Safety Lessons for Children and Adults

OpenAIRE

Wingfield, Amanda

2014-01-01

The purpose of this project was to design a series of lessons introducing food safety concepts and hand washing to children ages three to five, which is a group that is considered an ‘at risk’ population with food safety regards. There are other curriculum that reach this audience, but the intent of this one is to target stay-at-home mothers, whose children are not in preschool. The project goal is to teach the mother and child food safety concepts while simultaneously using hands on cooking ...

Free Trade and Tariffs: Level III, Unit 2, Lesson 1; Capitalism, Communism, Socialism: Lesson 2; Nationalism vs. Internationalism: Lesson 3. Advanced General Education Program. A High School Self-Study Program.

Science.gov (United States)

Manpower Administration (DOL), Washington, DC. Job Corps.

This self-study program for high-school level contains lessons on: Free Trade and Tariffs; Capitalism, Communism, Socialism; and Nationalism vs. Internationalism. Each of the lessons concludes with a Mastery Test to be completed by the student. (DB)

The Role of a Commander in Military Lessons Learned Systems

Directory of Open Access Journals (Sweden)

Zenon Waliński

2015-06-01

Full Text Available The aim of the paper is to investigate the role of a commander in military Lessons Learned systems. In order to achieve the aim, the paper presents (1 the architecture of the Lessons Learned capabilities in the U.S. Army, NATO and the Polish Armed Forces, (2 the commander’s role in the Lessons Learned process (3 the commander’s role in fostering Lessons Learned organisation culture. The paper is based on multiple case study analysis including Lessons Learned systems in NATO, the U.S. Army and the Polish Armed Forces.

The Johnson Space Center Management Information Systems (JSCMIS). 1: Requirements Definition and Design Specifications for Versions 2.1 and 2.1.1. 2: Documented Test Scenario Environments. 3: Security Design and Specifications

Science.gov (United States)

1986-01-01

The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at NASA Johnson which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. This issue gives requirements definition and design specifications for versions 2.1 and 2.1.1, along with documented test scenario environments, and security object design and specifications.

Bruce A restart (execution and lessons-learned)

International Nuclear Information System (INIS)

Soini, J.

2011-01-01

Lessons learned with the Bruce Units 3 and 4 restart have been incorporated into the current refurbishment of Units 1 and 2. In addition, lessons learned on the lead unit (U2) are aggressively applied on the lagging unit (U1) to maximize efficiency and productivity. There will be a discussion on how this internal OPEX, along with external lessons learned, are used to continuously improve all aspects of the Bruce A Restart project management cycle, from scope selection, through planning and scheduling, to execution.

METHODOLOGY OF ORGANIZATION OF INTEGRATED LESSONS OF NATURAL-SCIENCE CYCLE (ON THE EXAMPLE OF TEACHING SPE STUDENTS

Directory of Open Access Journals (Sweden)

Alsou Raufovna Kamaleeva

2015-09-01

Full Text Available In the process of transition of Russian organizations of secondary professional education to educational standards of the third generation educational process is reduced to formation of students’ competences. This article presents methodology of creating integrated lessons of natural-science cycle (for example, in physics and informatics. These lessons are constructed on the basis of interdisciplinary integration and focused on task solution. The main purpose is to teach students how to solve particular tasks in physics with the use of informatics, in particular on the basis of algorithmization and programming (Pascal language. Didactic conditions, which are the basis of the algorithm of designing corresponding tasks, are described in this article. Structural components of the integrated lessons created on the traditional principle are marked out. During the research we observed that realization of all stages of the corresponding lessons in practice allows the teacher to create educational process over the borders of disciplinary basis. This approach helps to form generalization of knowledge. Being one of the most optimal forms of education, an integrated lesson allows students to solve various educational and professional problems in non-standard situations and stimulates their cognitive activity and their involvement in the process of education and their responsibility for the result which promotes an intensification of educational process.

The physical education lesson in Turkish primary schools: Affective ...

African Journals Online (AJOL)

In the study students' affective entry characteristics related to Physical Education lessons were examined based on three dimensions: interest towards the lesson, level of motivation in the lesson and educational gains. The study further aimed to investigate how these three dimensions were affected by the gender factor.

77 FR 45282 - NRC Position on the Relationship Between General Design Criteria and Technical Specification...

Science.gov (United States)

2012-07-31

... Position on the Relationship Between General Design Criteria and Technical Specification Operability AGENCY... relationship between the general design criteria (GDC) for nuclear power plants and technical specification... Communications Branch, Division of Policy and Rulemaking, Office Nuclear Reactor Regulation, Mail Stop: OWFN-12-D...

Lessons learned in digital upgrade projects digital control system implementation at US nuclear power stations

International Nuclear Information System (INIS)

Kelley, S.; Bolian, T. W.

2006-01-01

AREVA NP has gained significant experience during the past five years in digital upgrades at operating nuclear power stations in the US. Plants are seeking modernization with digital technology to address obsolescence, spare parts availability, vendor support, increasing age-related failures and diminished reliability. New systems offer improved reliability and functionality, and decreased maintenance requirements. Significant lessons learned have been identified relating to the areas of licensing, equipment qualification, software quality assurance and other topics specific to digital controls. Digital control systems have been installed in non safety-related control applications at many utilities within the last 15 years. There have also been a few replacements of small safety-related systems with digital technology. Digital control systems are proving to be reliable, accurate, and easy to maintain. Digital technology is gaining acceptance and momentum with both utilities and regulatory agencies based upon the successes of these installations. Also, new plants are being designed with integrated digital control systems. To support plant life extension and address obsolescence of critical components, utilities are beginning to install digital technology for primary safety-system replacement. AREVA NP analyzed operating experience and lessons learned from its own digital upgrade projects as well as industry-wide experience to identify key issues that should be considered when implementing digital controls in nuclear power stations

Designing Interactive Electronic Module in Chemistry Lessons

Science.gov (United States)

Irwansyah, F. S.; Lubab, I.; Farida, I.; Ramdhani, M. A.

2017-09-01

This research aims to design electronic module (e-module) oriented to the development of students’ chemical literacy on the solution colligative properties material. This research undergoes some stages including concept analysis, discourse analysis, storyboard design, design development, product packaging, validation, and feasibility test. Overall, this research undertakes three main stages, namely, Define (in the form of preliminary studies); Design (designing e-module); Develop (including validation and model trial). The concept presentation and visualization used in this e-module is oriented to chemical literacy skills. The presentation order carries aspects of scientific context, process, content, and attitude. Chemists and multi media experts have done the validation to test the initial quality of the products and give a feedback for the product improvement. The feasibility test results stated that the content presentation and display are valid and feasible to be used with the value of 85.77% and 87.94%. These values indicate that this e-module oriented to students’ chemical literacy skills for the solution colligative properties material is feasible to be used.

Lessons Learned from Environmental Remediation Programmes

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-03-15

Several remediation projects have been developed to date, and experience with these projects has been accumulated. Lessons learned span from non-technical to technical aspects, and need to be shared with those who are beginning or are facing the challenge to implement environmental remediation works. This publication reviews some of these lessons. The key role of policy and strategies at the national level in framing the conditions in which remediation projects are to be developed and decisions made is emphasized. Following policy matters, this publication pays attention to the importance of social aspects and the requirement for fairness in decisions to be made, something that can only be achieved with the involvement of a broad range of interested parties in the decision making process. The publication also reviews the funding of remediation projects, planning, contracting, cost estimates and procurement, and issues related to long term stewardship. Lessons learned regarding technical aspects of remediation projects are reviewed. Techniques such as the application of cover systems and soil remediation (electrokinetics, phytoremediation, soil flushing, and solidification and stabilization techniques) are analysed with respect to performance and cost. After discussing soil remediation, the publication covers issues associated with water treatment, where techniques such as ‘pump and treat’ and the application of permeable barriers are reviewed. Subsequently, there is a section dedicated to reviewing briefly the lessons learned in the remediation of uranium mining and processing sites. Many of these sites throughout the world have become orphaned, and are waiting for remediation. The publication notes that little progress has been made in the management of some of these sites, particularly in the understanding of associated environmental and health risks, and the ability to apply prediction to future environmental and health standards. The publication concludes

Lessons Learned from Environmental Remediation Programmes

International Nuclear Information System (INIS)

2014-01-01

Several remediation projects have been developed to date, and experience with these projects has been accumulated. Lessons learned span from non-technical to technical aspects, and need to be shared with those who are beginning or are facing the challenge to implement environmental remediation works. This publication reviews some of these lessons. The key role of policy and strategies at the national level in framing the conditions in which remediation projects are to be developed and decisions made is emphasized. Following policy matters, this publication pays attention to the importance of social aspects and the requirement for fairness in decisions to be made, something that can only be achieved with the involvement of a broad range of interested parties in the decision making process. The publication also reviews the funding of remediation projects, planning, contracting, cost estimates and procurement, and issues related to long term stewardship. Lessons learned regarding technical aspects of remediation projects are reviewed. Techniques such as the application of cover systems and soil remediation (electrokinetics, phytoremediation, soil flushing, and solidification and stabilization techniques) are analysed with respect to performance and cost. After discussing soil remediation, the publication covers issues associated with water treatment, where techniques such as ‘pump and treat’ and the application of permeable barriers are reviewed. Subsequently, there is a section dedicated to reviewing briefly the lessons learned in the remediation of uranium mining and processing sites. Many of these sites throughout the world have become orphaned, and are waiting for remediation. The publication notes that little progress has been made in the management of some of these sites, particularly in the understanding of associated environmental and health risks, and the ability to apply prediction to future environmental and health standards. The publication concludes

Molecular Design of Antifouling Polymer Brushes Using Sequence-Specific Peptoids.

Science.gov (United States)

Lau, King Hang Aaron; Sileika, Tadas S; Park, Sung Hyun; Sousa, Ana Maria Leal; Burch, Patrick; Szleifer, Igal; Messersmith, Phillip B

2015-01-07

Material systems that can be used to flexibly and precisely define the chemical nature and molecular arrangement of a surface would be invaluable for the control of complex biointerfacial interactions. For example, progress in antifouling polymer biointerfaces that prevent non-specific protein adsorption and cell attachment, which can significantly improve the performance of an array of biomedical and industrial applications, is hampered by a lack of chemical models to identify the molecular features conferring their properties. Poly(N-substituted glycine) "peptoids" are peptidomimetic polymers that can be conveniently synthesized with specific monomer sequences and chain lengths, and are presented as a versatile platform for investigating the molecular design of antifouling polymer brushes. Zwitterionic antifouling polymer brushes have captured significant recent attention, and a targeted library of zwitterionic peptoid brushes with a different charge densities, hydration, separations between charged groups, chain lengths, and grafted chain densities, is quantitatively evaluated for their antifouling properties through a range of protein adsorption and cell attachment assays. Specific zwitterionic brush designs were found to give rise to distinct but subtle differences in properties. The results also point to the dominant roles of the grafted chain density and chain length in determining the performance of antifouling polymer brushes.

Evidence for the effectiveness of Alexander Technique lessons in medical and health-related conditions: a systematic review.

Science.gov (United States)

Woodman, J P; Moore, N R

2012-01-01

Complementary medicine and alternative approaches to chronic and intractable health conditions are increasingly being used, and require critical evaluation. The aim of this review was to systematically evaluate available evidence for the effectiveness and safety of instruction in the Alexander Technique in health-related conditions. PUBMED, EMBASE, PSYCHINFO, ISI Web-of-Knowledge, AMED, CINHAL-plus, Cochrane library and Evidence-based Medicine Reviews were searched to July 2011. Inclusion criteria were prospective studies evaluating Alexander Technique instruction (individual lessons or group delivery) as an intervention for any medical indication/health-related condition. Studies were categorised and data extracted on study population, randomisation method, nature of intervention and control, practitioner characteristics, validity and reliability of outcome measures, completeness of follow-up and statistical analyses.   Of 271 publications identified, 18 were selected: three randomised, controlled trials (RCTs), two controlled non-randomised studies, eight non-controlled studies, four qualitative analyses and one health economic analysis. One well-designed, well-conducted RCT demonstrated that, compared with usual GP care, Alexander Technique lessons led to significant long-term reductions in back pain and incapacity caused by chronic back pain. The results were broadly supported by a smaller, earlier RCT in chronic back pain. The third RCT, a small, well-designed, well-conducted study in individuals with Parkinson's disease, showed a sustained increased ability to carry out everyday activities following Alexander lessons, compared with usual care. The 15 non-RCT studies are also reviewed. Strong evidence exists for the effectiveness of Alexander Technique lessons for chronic back pain and moderate evidence in Parkinson's-associated disability. Preliminary evidence suggests that Alexander Technique lessons may lead to improvements in balance skills in the

The Value of the Operational Principle in Instructional Design

Science.gov (United States)

Gibbons, Andrew S.

2009-01-01

Formal design studies are increasing our insight into design processes, including those of instructional design. Lessons are being learned from other design fields, and new techniques and concepts can be imported as they are demonstrated effective. The purpose of this article is to introduce a design concept--the "operational principle"--for…

The Algebra Teacher's Guide to Reteaching Essential Concepts and Skills 150 Mini-Lessons for Correcting Common Mistakes

CERN Document Server

Muschla, Judith A; Muschla, Erin

2011-01-01

Easy to apply lessons for reteaching difficult algebra concepts Many students have trouble grasping algebra. In this book, bestselling authors Judith, Gary, and Erin Muschla offer help for math teachers who must instruct their students (even those who are struggling) about the complexities of algebra. In simple terms, the authors outline 150 classroom-tested lessons, focused on those concepts often most difficult to understand, in terms that are designed to help all students unravel the mysteries of algebra. Also included are reproducible worksheets that will assist teachers in reviewing and r

Teaching Norwegian to Beginners: Six Principles to Guide Lesson Planning

Directory of Open Access Journals (Sweden)

Anna Krulatz

2014-01-01

Full Text Available Teaching a foreign language is no simple task. There are several factors to consider, from curriculum design, to material selection and lesson implementation, to assessment. The challenge, however, is even greater, if you are teaching a less commonly taught language such as Norwegian – a language spoken by fewer than six million native speakers, used almost exclusively in one country, and with a limited number of available pedagogical materials. Under such circumstances, the task of preparing high quality communicative lessons is immense, even for an experienced language instructor. The goal of this article is to present how a successful language lesson can be developed even if one is using a textbook that does not foster communicative competence. As an example, I am using a unit from a Norwegian textbook for beginners: På vei, often used in Norwegian as a second language course for adults in Norway. The lesson focuses on routines and times of the day, and it concludes with the students comparing and contrasting their daily routines with a partner. Prior to this lesson, students have learned to provide basic information about themselves (where they come from, what languages they speak, what they do for work, expressions for greetings and goodbyes, basic verbs relating to daily activities such as ‘snakker’ (to speak, ‘kjører’ (to drive, ‘kjøpper’ (to buy, ‘jobber’ (to work, ‘leser’ (to read, ‘scriver’ (to write, ordinal numerals, meals, some food items, some basic prepositions and locations, words for family members, and subject and object pronouns for all persons. If you were to closely follow the textbook in teaching this unit, you would begin by teaching the students how to tell time, then briefly go over some verbs to express daily routines, listen to and read a text titled ‘Jeg står opp klokka seks,’ a narrative about Monica’s day (Monica is one of the characters in the book, and finally ask the students

Baseline design of an OTEC pilot plantship. Volume C. Specifications

Energy Technology Data Exchange (ETDEWEB)

Glosten, L. R.; Bringloe, Thomas; Soracco, Dave; Fenstermacher, Earl; Magura, Donald; Sander, Olof; Richards, Dennis; Seward, Jerry

1979-05-01

Volume C is part of a three-volume report that presents a baseline engineering design of an Ocean Thermal Energy Conversion (OTEC) plantship. This volume provides the specifications for the hull, cold-water pipe, ship outfitting and machinery, OTEC power system, electrical system, and folded-tube heat exchangers.

Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants

Science.gov (United States)

Shidid, Darpan; Leary, Martin; Choong, Peter; Brandt, Milan

Recent advances in medical imaging and manufacturing science have enabled the design and production of complex, patient-specific orthopaedic implants. Additive Manufacture (AM) generates three-dimensional structures layer by layer, and is not subject to the constraints associated with traditional manufacturing methods. AM provides significant opportunities for the design of novel geometries and complex lattice structures with enhanced functional performance. However, the design and manufacture of patient-specific AM implant structures requires unique expertise in handling various optimization platforms. Furthermore, the design process for complex structures is computationally intensive. The primary aim of this research is to enable the just-in-time customisation of AM prosthesis; whereby AM implant design and manufacture be completed within the time constraints of a single surgical procedure, while minimising prosthesis mass and optimising the lattice structure to match the stiffness of the surrounding bone tissue. In this research, a design approach using raw CT scan data is applied to the AM manufacture of femoral prosthesis. Using the proposed just-in-time concept, the mass of the prosthesis was rapidly designed and manufactured while satisfying the associated structural requirements. Compressive testing of lattice structures manufactured using proposed method shows that the load carrying capacity of the resected composite bone can be recovered by up to 85% and the compressive stiffness of the AM prosthesis is statistically indistinguishable from the stiffness of the initial bone.

"Elements of Astronomy": A Television Course of 30 Lessons

Science.gov (United States)

Perez, J. P. D.; Del Pozo, E. P. G.; Rodriguez, R. R. T.; Mendez, A. M. B.; Rodriguez, E. R. F.; Gamez, R. G. D.

2006-08-01

It was broadcasted to all Cuba from March to December 2005, one lesson per week, transmitting three times each lesson, this means 90 hours of broadcasting. It was one of the courses of the Program "University for All", that Educative Channel produced. The Thematic: Sky Coordinates and Constellations; Astronomical Instruments; Solar System; Planets and their Moons; Comets, Asteroids and Meteoroids; Sun; Cosmic Environment and Space Weather; Stars; Galaxy and Quasars; Observable Universe; Life, Intelligent Life and Civilizations in the Universe; and History of Astronomy in Cuba. The professor staff was a group of 5 researchers of the Astronomy Department. They did an effort that each lesson had the best information level with a minimum of mathematical expressions. And were used more than 60 slides and various astronomical films fragments per lesson. To make one lesson was analyzed several astronomical films, selected a group of fragments and pre-edited into various blocks with the TV specialists, later a power point presentation was conformed using all available information on-line and bibliography. Then the lesson was recorded by the TV specialist at the Educative Channel and latter reviewed and improved by one AVID edition. The Course groundwork began in April 2003, with the first list of 12 lessons, later in June was increased to18 lessons, and started the work of "Tabloide" making; it is a journal-type book of 32 pages, equivalent to about 120 normal pages including 64 illustrations. At December 2004 the Course was increased to 30 lessons and the "Tabloide" was send to editor, later 200,000 exemplars was published. Many people followed Course and "Tabloide" was shopped in some months.

Lessons learned from accidents investigations

Energy Technology Data Exchange (ETDEWEB)

Zuniga-Bello, P. [Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico City (Mexico); Croft, J. [National Radiological Protection Board (United Kingdom); Glenn, J

1997-12-31

Accidents from three main practices: medical applications, industrial radiography and industrial irradiators are used to illustrate some common causes of accidents and the main lessons to be learned. A brief description of some of these accidents is given. Lessons learned from the described accidents are approached by subjects covering: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

Lessons learned from accident investigations

International Nuclear Information System (INIS)

Zuniga-Bello, P.; Croft, J.R.; Glenn, J.

1998-01-01

Accidents in three main practices - medical applications, industrial radiography and industrial irradiators - are used to illustrate some common causes of accidents and the main lessons to be learned from them. A brief description of some of these accidents is given. Lessons learned from the accidents described are approached bearing in mind: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

Sustaining Lesson Study: Resources and Factors that Support and Constrain Mathematics Teachers' Ability to Continue After the Grant Ends

Science.gov (United States)

Druken, Bridget Kinsella

Lesson study, a teacher-led vehicle for inquiring into teacher practice through creating, enacting, and reflecting on collaboratively designed research lessons, has been shown to improve mathematics teacher practice in the United States, such as improving knowledge about mathematics, changing teacher practice, and developing communities of teachers. Though it has been described as a sustainable form of professional development, little research exists on what might support teachers in continuing to engage in lesson study after a grant ends. This qualitative and multi-case study investigates the sustainability of lesson study as mathematics teachers engage in a district scale-up lesson study professional experience after participating in a three-year California Mathematics Science Partnership (CaMSP) grant to improve algebraic instruction. To do so, I first provide a description of material (e.g. curricular materials and time), human (attending district trainings and interacting with mathematics coaches), and social (qualities like trust, shared values, common goals, and expectations developed through relationships with others) resources present in the context of two school districts as reported by participants. I then describe practices of lesson study reported to have continued. I also report on teachers' conceptions of what it means to engage in lesson study. I conclude by describing how these results suggest factors that supported and constrained teachers' in continuing lesson study. To accomplish this work, I used qualitative methods of grounded theory informed by a modified sustainability framework on interview, survey, and case study data about teachers, principals, and Teachers on Special Assignment (TOSAs). Four cases were selected to show the varying levels of lesson study practices that continued past the conclusion of the grant. Analyses reveal varying levels of integration, linkage, and synergy among both formally and informally arranged groups of

Providing Simulated Online and Mobile Learning Experiences in a Prison Education Setting: Lessons Learned from the PLEIADES Pilot Project

Science.gov (United States)

Farley, Helen; Murphy, Angela; Bedford, Tasman

2014-01-01

This article reports on the preliminary findings, design criteria and lessons learned while developing and piloting an alternative to traditional print-based education delivery within a prison environment. PLEIADES (Portable Learning Environments for Incarcerated Distance Education Students), was designed to provide incarcerated students with…

LESSONS LEARNED THROUGH OPTIMIZATION OF THE VOLUNTARY CORRECTIVE ACTION PROCESS

International Nuclear Information System (INIS)

Thacker, M. S.; Freshour, P.; McDonald, W.

2002-01-01

Valuable experience in environmental remediation was gained at Sandia National Laboratories/New Mexico (Sandia) by concurrently conducting Voluntary Corrective Actions (VCAs) at three Solid Waste Management Units (SWMUs). Sandia combined the planning, implementation, and reporting phases of three VCAs with the goal of realizing significant savings in both cost and schedule. The lessons learned through this process have been successfully implemented within the Sandia Environmental Restoration (ER) Project and could be utilized at other locations with multiple ER sites. All lessons learned resulted from successful teaming with the New Mexico Environment Department (NMED) Hazardous Waste Bureau (HWB), Sandia management, a Sandia risk assessment team, and Sandia waste management personnel. Specific lessons learned included the following: (1) potential efficiencies can be exploited by reprioritization and rescheduling of activities; (2) cost and schedule reductions can be realized by combining similar work at contiguous sites into a single effort; (3) working with regulators to develop preliminary remediation goals (PRGs) and gain regulatory acceptance for VCA planning prior to project initiation results in significant time savings throughout the remediation and permit modification processes; (4) effective and thoughtful contingency planning removes uncertainties and defrays costs so that projects can be completed without interruption; (5) timely collection of waste characterization samples allows efficient disposal of waste streams, and (6) concurrent reporting of VCA activities results in significant savings in time for the authors and reviewers

Regulating “big data education” in Europe: lessons learned from the US

Directory of Open Access Journals (Sweden)

Yoni Har Carmel

2016-03-01

Full Text Available European schools are increasingly relying on vendors to collect, process, analyse, and even make decisions based on a considerable amount of student data through big data tools and methods. Consequently, portions of school’s power are gradually shifting from traditional public schools to the hands of for-profit organisations. This article discusses the current and forthcoming European Union (EU data protection regime with respect to the protection of student rights from the potential risk of outsourcing student data utilisation in Kindergarten-12th grade (K-12 educational systems. The article identifies what lessons can be drawn from recent developments in the United States (US “student data affair”. These lessons can provide a new perspective for designing a balanced policy for regulating the shift in school’s power.

Experiences with the hydraulic design of the high specific speed Francis turbine

International Nuclear Information System (INIS)

Obrovsky, J; Zouhar, J

2014-01-01

The high specific speed Francis turbine is still suitable alternative for refurbishment of older hydro power plants with lower heads and worse cavitation conditions. In the paper the design process of such kind of turbine together with the results comparison of homological model tests performed in hydraulic laboratory of ČKD Blansko Engineering is introduced. The turbine runner was designed using the optimization algorithm and considering the high specific speed hydraulic profile. It means that hydraulic profiles of the spiral case, the distributor and the draft tube were used from a Kaplan turbine. The optimization was done as the automatic cycle and was based on a simplex optimization method as well as on a genetic algorithm. The number of blades is shown as the parameter which changes the resulting specific speed of the turbine between n s =425 to 455 together with the cavitation characteristics. Minimizing of cavitation on the blade surface as well as on the inlet edge of the runner blade was taken into account during the design process. The results of CFD analyses as well as the model tests are mentioned in the paper

Experiences with the hydraulic design of the high specific speed Francis turbine

Science.gov (United States)

Obrovsky, J.; Zouhar, J.

2014-03-01

The high specific speed Francis turbine is still suitable alternative for refurbishment of older hydro power plants with lower heads and worse cavitation conditions. In the paper the design process of such kind of turbine together with the results comparison of homological model tests performed in hydraulic laboratory of ČKD Blansko Engineering is introduced. The turbine runner was designed using the optimization algorithm and considering the high specific speed hydraulic profile. It means that hydraulic profiles of the spiral case, the distributor and the draft tube were used from a Kaplan turbine. The optimization was done as the automatic cycle and was based on a simplex optimization method as well as on a genetic algorithm. The number of blades is shown as the parameter which changes the resulting specific speed of the turbine between ns=425 to 455 together with the cavitation characteristics. Minimizing of cavitation on the blade surface as well as on the inlet edge of the runner blade was taken into account during the design process. The results of CFD analyses as well as the model tests are mentioned in the paper.

Sustainable Product Design, Engineering and Management Education for Industrial Design Engineering

OpenAIRE

Boks, C.; Diehl, J.C.; Wever, R.

2006-01-01

Developments in the field of sustainable product design are manifold, which means that education in this field is rapidly evolving as well. In this paper, the continuously evolving portfolio of courses offered at Delft University of Technology’s Industrial Design Engineering faculty is systematically discussed, with a focus on content, course formats, assignments and lessons learned from course evaluations in recent years. It is concluded that in particular integration in existing contexts (a...

Lessons Learned in Software Testing A Context-Driven Approach

CERN Document Server

Kaner, Cem; Pettichord, Bret

2008-01-01

Decades of software testing experience condensed into the most important lessons learned.The world's leading software testing experts lend you their wisdom and years of experience to help you avoid the most common mistakes in testing software. Each lesson is an assertion related to software testing, followed by an explanation or example that shows you the how, when, and why of the testing lesson. More than just tips, tricks, and pitfalls to avoid, Lessons Learned in Software Testing speeds you through the critical testing phase of the software development project without the extensive trial an

Lesson Planning with the Common Core

Science.gov (United States)

Estes, Linda A.; McDuffie, Amy Roth; Tate, Cathie

2014-01-01

Planning a lesson can be similar to planning a road trip--a metaphor the authors use to describe how they applied research and theory to their lesson planning process. A map and mode of transportation, the Common Core State Standards for Mathematics (CCSSM) and textbooks as resources, can lead to desired destinations, such as students engaging in…

[Economics] Introductory Lesson (Begin Day One). Lesson Plan.

Science.gov (United States)

Lewin, Roland

This introductory lesson on teaching economics concepts contains sections on the following: purpose; objectives; time; materials needed; and step-by-step classroom procedures. The focus is on the economic problem of scarcity and opportunity costs. Attached is an original skit, "There's no such thing as a free lunch," and a chart that…

Design Specification and Verification

DEFF Research Database (Denmark)

Staunstrup, Jørgen

1997-01-01

This is chapter 7 in an edited book that presents a number of issues of fundamental importance for the design of integrated hardware software products such as embedded, communication, and multimedia systems. This book is the result of a series of Ph.D. courses on hardware/software co-design held...

Feedback of safety - related operational experience: Lessons learned

Energy Technology Data Exchange (ETDEWEB)

Elias, D [Commonwealth Edison Co. (United States)

1997-09-01

The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues.

Feedback of safety - related operational experience: Lessons learned

International Nuclear Information System (INIS)

Elias, D.

1997-01-01

The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues

Driver. D530.2 – Tools for the Lessons Learned Framework

NARCIS (Netherlands)

Schaik, M.G. van; et al

2016-01-01

In this deliverable D530.2 “Tools for the Lessons Learned Framework” the overall lessons learned framework will be clarified based on the delivery D53.1 “Lessons Learned Framework Concept” and aligned with the deliverable D52.1 “Harmonized competence framework”. The Tools for the Lessons Learned

UNLEARNED LESSONS OF CONTEMPORARY HISTORY

Directory of Open Access Journals (Sweden)

А Н Данилов

2017-12-01

Full Text Available The article considers the complex geopolitical situation in the global world at the end of the second decade of the 21st century as determined by the consequences of the collapse of the Soviet Union and by the new world order. The author seeks to answer the questions who will define the current geopolitical situation, whose aims it will reflect, what will become the basis of new geopolitical realities, the basis of moral solidarity of humankind, and the spiritual basis of future civilizations. The new challenges give rise to a desperate struggle for different scenarios for building a happy life. Moreover, it is not clear which ideal of the future world will be widely supported as a development guideline. The recognition as such of the standard of living and development of the strongest ones becomes a real threat to the new civilization for it leads to the loss of national interests of sovereign states, and to the loss of an independent future. Today, there is an active search for new theories and concepts that will adequately explain con-temporary global processes. In this thematic context, the author identifies main lessons not learned by the world political elites. The first lesson: new states are not born in an empty place, their common history is a great advantage ensuring prospects for the further development of interstate cooperation. The second lesson: the widespread falsification of history has a negative impact on national, cultural and social-group identity in transforming societies. The third lesson: after the collapse of the Soviet Union, the post-war balance of power was destroyed together with the system of checks and balances in world politics (a bipolar model of the world. The fourth lesson: under radical social transformations, the moral system of the population devaluates with numerous crisis consequences.

The 2015 Nepal earthquake disaster: lessons learned one year on.

Science.gov (United States)

Hall, M L; Lee, A C K; Cartwright, C; Marahatta, S; Karki, J; Simkhada, P

2017-04-01

The 2015 earthquake in Nepal killed over 8000 people, injured more than 21,000 and displaced a further 2 million. One year later, a national workshop was organized with various Nepali stakeholders involved in the response to the earthquake. The workshop provided participants an opportunity to reflect on their experiences and sought to learn lessons from the disaster. One hundred and thirty-five participants took part and most had been directly involved in the earthquake response. They included representatives from the Ministry of Health, local and national government, the armed forces, non-governmental organizations, health practitioners, academics, and community representatives. Participants were divided into seven focus groups based around the following topics: water, sanitation and hygiene, hospital services, health and nutrition, education, shelter, policy and community. Facilitated group discussions were conducted in Nepalese and the key emerging themes are presented. Participants described a range of issues encountered, some specific to their area of expertize but also more general issues. These included logistics and supply chain challenges, leadership and coordination difficulties, impacts of the media as well as cultural beliefs on population behaviour post-disaster. Lessons identified included the need for community involvement at all stages of disaster response and preparedness, as well as the development of local leadership capabilities and community resilience. A 'disconnect' between disaster management policy and responses was observed, which may result in ineffective, poorly planned disaster response. Finding time and opportunity to reflect on and identify lessons from disaster response can be difficult but are fundamental to improving future disaster preparedness. The Nepal Earthquake National Workshop offered participants the space to do this. It garnered an overwhelming sense of wanting to do things better, of the need for a Nepal-centric approach

Graded territories: Towards the design, specification and simulation of materially graded bending active structures

DEFF Research Database (Denmark)

Nicholas, Paul; Tamke, Martin; Ramsgaard Thomsen, Mette

2012-01-01

these structures, the property of bending is activated and varied through bespoke material means so as to match a desired form. Within the architectural design process, formal control depends upon design approaches for material specification and simulation that consider behavior at the level of the material...... element as well as the structure. We describe an evolving approach to material specification and simulation, and highlight the digital and material considerations that frame the process.......The ability to make materials with bespoke behavior affords new perspectives on incorporating material properties within the design process not available through natural materials. This paper reports the design and assembly of two bending-active, fibre-reinforced composite structures. Within...

Lessons in Beauty: Art and Adult Education. Studies in Pedagogy, Andragogy, and Gerontagogy, Volume 35.

Science.gov (United States)

van Gent, Bastiaan

This book explores the connections between art and education and, specifically, the links among the art of painting, the training of artists, and the education of adults. Five chapters discuss moralization, professionalization, aestheticization, musealization, and indoctrination. "Instruction and Diversion: Moral Lessons in Dutch Art"…

The implementation of school-based lesson study at elementary school

Directory of Open Access Journals (Sweden)

Purnomo Purnomo

2017-07-01

Full Text Available This study aims to describe and interpret the implementation of school-based lesson study in SDN I Kretek. This study uses the qualitative research. The data were collected through in-depth interviews, participant observation, field notes, and documentation. The data validity was determined through sources and techniques triangulation. The data were analyzed using the Interactive Analysis Model from Miles and Huberman. The results show: (1 the planning of school-based lesson study program at SDN 1 Kretek has been implemented from the beginning of the school year 2014/2015 by establishing school-based lesson study team. This team is responsible for planning, managing, and evaluating school-based lesson study program at SDN 1 Kretek, (2 school-based lesson study at SDN 1 Kretek is implemented in three phases, namely planning, implementation, and reflection, and (3 The evaluation of lesson study is conducted by each teacher who has conducted the open class and conducted thoroughly with a meeting by a team of school-based lesson study SDN 1 Kretek at the end of the school year.

Development of Lesson Plans and Student Worksheets Based Socio-Scientific Issues on Pollution Environmental Topic

Science.gov (United States)

Rahayu, S.; Meyliana, M.; Arlingga, A.; Reny, R.; Siahaan, P.; Hernani, H.

2017-09-01

The aim of this study is to develop lesson plans and student worksheets based socio-scientific issues on pollution environmental topic for seventh-grade junior high school students. Environmental pollution topic split into several subtopics namely air pollution, water pollution and soil pollution. The composing of lesson plans were developed based on socio-scientific issues with five stages, namely (1) Motivate; (2) Challenge; (3) Collect scientific evidence; (4) Analyse the evidence; (5) Build knowledge and make connections; and (6) Use evidence. While student worksheets contain articles on socio-scientific issues, practice, and there are a few questions to determine students’ reasoning. The method that is used in this research is research and development (R & D method). Development model used in this study is a model of Plomp that consists of four stages, namely: (1) Initial Research; (2) Design; (3) Realization or Construction; (4) Testing, evaluation and revision; (5) Implementation, while the research was limited to the fourth stage. Lesson plans and student worksheets based on socio-scientific issues was validated through an expert validation. The result showed that lesson plans and student worksheets based socio-scientific issues on pollution theme have a very decent and be able to apply in science classroom.

Lessons learned from Gen II NPP staffing approaches applicable to new reactors - 15003

International Nuclear Information System (INIS)

Goodnight, C.

2015-01-01

This paper discusses lessons learned from the operation of the Gen II fleet of existing nuclear power plants (NPPs), in terms of staffing, that can be applied to the final design, deployment, and operation of new reactor designs. The most significant of these lessons is the need to appropriately staff the facility, having the right number of people with the required skills and experience. This begs the question of how to identify those personnel requirements. For NPPs, there are five key factors that ultimately will determine the effectiveness and costs of operating nuclear power plants (NPPs): 1) The Nuclear Steam Supply System (NSSS) and the layout of the plant site; 2) The processes which the operating organization applies; 3) The organizational structure of the operating organization; 4) The organizational culture of the operating organization, and 5) The regulatory framework under which the licensee must operate. In summary, this paper identifies opportunities to minimize staffing and costs learned from Gen II NPPs that may be applicable for new nuclear plants. (author)

PENGEMBANGAN PERANGKAT DAN MODEL PEMBELAJARAN BERBASIS KONSTRUKTIVIS MATAKULIAH STATISTIKA MELALUI PENDEKATAN LESSON STUDY

Directory of Open Access Journals (Sweden)

Nining Setyaningsih

2015-07-01

Full Text Available This research aims to produce instructional design and model-based constructivist learning course of Statistics Math through lesson study in an effort to improve the quality of learning. Besides, it is also to find the effect of the use of the device and the constructivist model of learning based on student results. This study uses the approach of research and development (research & development. Results of research and development are as follows: (1 The statistical learning mathematics, covering the syllabus, lecture and Quality Plans, and Teaching materials are ready to be validated through lesson study approach, planning, implementation, reflection, and follow-up. (2 Design-based constructivist learning model includes the stages of orientation, elicitasi, restructuring ideas, the application and review. (3 Based on the findings of the trial results and the model of learning, particularly in the development of student activity indicates that the use of constructivist-based learning model can increase the activity of students, as measured by indicators of the ability to answer questions, the ability to propose ideas, and the ability to submit allegations.

AECL's underground research laboratory: technical achievements and lessons learned

International Nuclear Information System (INIS)

Ohta, M.M.; Chandler, N.A.

1997-03-01

During the development of the research program for the Canadian Nuclear Fuel Waste Management Program in the 1970's, the need for an underground facility was recognized. AECL constructed an Underground Research Laboratory (URL) for large-scale testing and in situ engineering and performance-assessment-related experiments on key aspects of deep geological disposal in a representative geological environment. Ale URL is a unique geotechnical research and development facility because it was constructed in a previously undisturbed portion of a granitic pluton that was well characterized before construction began, and because most of the shaft and experimental areas are below the water table. The specific areas of research, development and demonstration include surface and underground characterization; groundwater and solute transport; in situ rock stress conditions; temperature and time-dependent deformation and failure characteristics of rock; excavation techniques to minimize damage to surrounding rock and to ensure safe working conditions; and the performance of seals and backfills. This report traces the evolution of the URL and summarizes the technical achievements and lessons learned during its siting, design and construction, and operating phases over the last 18 years. (author)

Considerations for implementing an organizational lessons learned process.

Energy Technology Data Exchange (ETDEWEB)

Fosshage, Erik D

2013-05-01

This report examines the lessons learned process by a review of the literature in a variety of disciplines, and is intended as a guidepost for organizations that are considering the implementation of their own closed-loop learning process. Lessons learned definitions are provided within the broader context of knowledge management and the framework of a learning organization. Shortcomings of existing practices are summarized in an attempt to identify common pitfalls that can be avoided by organizations with fledgling experiences of their own. Lessons learned are then examined through a dual construct of both process and mechanism, with emphasis on integrating into organizational processes and promoting lesson reuse through data attributes that contribute toward changed behaviors. The report concludes with recommended steps for follow-on efforts.

Towards a lessons learned system for critical software

International Nuclear Information System (INIS)

Andrade, J.; Ares, J.; Garcia, R.; Pazos, J.; Rodriguez, S.; Rodriguez-Paton, A.; Silva, A.

2007-01-01

Failure can be a major driver for the advance of any engineering discipline and Software Engineering is no exception. But failures are useful only if lessons are learned from them. In this article we aim to make a strong defence of, and set the requirements for, lessons learned systems for safety-critical software. We also present a prototype lessons learned system that includes many of the features discussed here. We emphasize that, apart from individual organizations, lessons learned systems should target industrial sectors and even the Software Engineering community. We would like to encourage the Software Engineering community to use this kind of systems as another tool in the toolbox, which complements or enhances other approaches like, for example, standards and checklists

Towards a lessons learned system for critical software

Energy Technology Data Exchange (ETDEWEB)

Andrade, J. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: jag@udc.es; Ares, J. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: juanar@udc.es; Garcia, R. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: rafael@udc.es; Pazos, J. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: jpazos@fi.upm.es; Rodriguez, S. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: santi@udc.es; Rodriguez-Paton, A. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: arpaton@fi.upm.es; Silva, A. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: asilva@fi.upm.es

2007-07-15

Failure can be a major driver for the advance of any engineering discipline and Software Engineering is no exception. But failures are useful only if lessons are learned from them. In this article we aim to make a strong defence of, and set the requirements for, lessons learned systems for safety-critical software. We also present a prototype lessons learned system that includes many of the features discussed here. We emphasize that, apart from individual organizations, lessons learned systems should target industrial sectors and even the Software Engineering community. We would like to encourage the Software Engineering community to use this kind of systems as another tool in the toolbox, which complements or enhances other approaches like, for example, standards and checklists.

Evolution of design considerations in complex craniofacial reconstruction using patient-specific implants.

Science.gov (United States)

Peel, Sean; Bhatia, Satyajeet; Eggbeer, Dominic; Morris, Daniel S; Hayhurst, Caroline

2017-06-01

Previously published evidence has established major clinical benefits from using computer-aided design, computer-aided manufacturing, and additive manufacturing to produce patient-specific devices. These include cutting guides, drilling guides, positioning guides, and implants. However, custom devices produced using these methods are still not in routine use, particularly by the UK National Health Service. Oft-cited reasons for this slow uptake include the following: a higher up-front cost than conventionally fabricated devices, material-choice uncertainty, and a lack of long-term follow-up due to their relatively recent introduction. This article identifies a further gap in current knowledge - that of design rules, or key specification considerations for complex computer-aided design/computer-aided manufacturing/additive manufacturing devices. This research begins to address the gap by combining a detailed review of the literature with first-hand experience of interdisciplinary collaboration on five craniofacial patient case studies. In each patient case, bony lesions in the orbito-temporal region were segmented, excised, and reconstructed in the virtual environment. Three cases translated these digital plans into theatre via polymer surgical guides. Four cases utilised additive manufacturing to fabricate titanium implants. One implant was machined from polyether ether ketone. From the literature, articles with relevant abstracts were analysed to extract design considerations. In all, 19 frequently recurring design considerations were extracted from previous publications. Nine new design considerations were extracted from the case studies - on the basis of subjective clinical evaluation. These were synthesised to produce a design considerations framework to assist clinicians with prescribing and design engineers with modelling. Promising avenues for further research are proposed.

Re-Greening Ethiopia: History, Challenges and Lessons

Directory of Open Access Journals (Sweden)

Mulugeta Lemenih

2014-07-01

Full Text Available In Ethiopia, deforestation rates remain high and the gap between demand and domestic supply of forest products is expanding, even though government-initiated re-greening efforts began over a century ago. Today, over 3 million hectares (ha of degraded forest land are under area exclosure; smallholder plantations cover 0.8 million ha; and state-owned industrial plantations stagnate at under 0.25 million ha. This review captures experiences related to re-greening practices in Ethiopia, specifically with regards to area exclosure and afforestation and reforestation, and distills lessons regarding processes, achievements and challenges. The findings show that farmers and non-governmental organizations (NGOs are the main players, and that the private sector has so far played only a small role. The role of the government was mixed: supportive in some cases and hindering in others. The challenges of state- and NGO-led re-greening practices are: inadequate involvement of communities; poorly defined rehabilitation objectives; lack of management plans; unclear responsibilities and benefit-sharing arrangements; and poor silvicultural practices. The lessons include: a more active role for non-state actors in re-greening initiatives; more attention to market signals; devolution of management responsibility; clear definition of responsibilities and benefit-sharing arrangements; and better tenure security, which are all major factors to success.

Lessons from Early Medicaid Expansions Under Health Reform..

Data.gov (United States)

U.S. Department of Health & Human Services — Lessons from Early Medicaid Expansions Under Health Reform, Interviews with Medicaid Officials In a new study entitled Lessons from Early Medicaid Expansions Under...

Lessons learned from women in leadership positions.

Science.gov (United States)

Elias, Eileen

2018-01-01

Eileen Elias has decades of experience in leadership positions within government and nongovernmental organizations. As the first female Commissioner for Mental Health in the Commonwealth of Massachusetts and the US in the early 1990s, Elias gained experience on navigating gender-based challenges to attain recognized performance outcomes. From lessons learned from women leaders, educate young women entering their careers on attaining leadership positions. Comprehensive research of literature from 2012 through 2017 and interviews with women leaders representing non-Fortune 500 companies including academia, research, non-profit, for-profit, and primary and secondary education. Interviewees included:1.Gail Bassin, Co-Chief Executive Officer and Treasurer, JBS International Inc.2.Jeri Epstein, Executive Director, The Ambit Foundation3.Valerie Fletcher, Executive Director, Institute for Human Centered Design4.Christine James-Brown, President and CEO, Child Welfare League of America5.Daria Mochly-Rosen, PhD, Professor and Fellow, Chemical and Systems Biology, Stanford University School of Medicine6.Eileen O'Keefe, MD, MPH, Clinical Associate Professor and Director, Boston University Health Sciences7.Jeri Shaw, President and Co-Chief Executive Officer, JBS International Inc. A comprehensive understanding of key women leaders' lessons learned and recommendations targeting young women as they assess leadership opportunities in the public or private sectors.

N Reactor Lessons Learned workshop

International Nuclear Information System (INIS)

Heaberlin, S.W.

1993-07-01

This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

Design thinking can deepen the collaboration between scientists and society: Lessons from the innovation economy

Science.gov (United States)

McEntee, C.; Zurbuchen, T.; Easterling, W. E.; Gallaudet, T.; Werkheiser, W. H.; McEntee, C.; Zurbuchen, T.; Pandya, R.; Manduca, C. A.; Graumlich, L. J.; Snover, A. K.; Klinger, T.

2017-12-01

Now, more than any time in recent memory, scientists are stepping forward, eager to bring science to bear on environmental issues. The time could not be more ripe; we have the best tool ever developed by human kind for understanding cause and consequence: science itself. And we have an impressive tool kit for communicating science honed through decades of engagement. Despite these advances, we face a head wind. Public trust in experts is on the decline. Society's deep polarization means that wading into societal issues brings us uncomfortably close to the deep end of politics. The expertise that is required to tackle the thorniest of environmental problems is not just technical but also requires addressing differing value systems and pervasive issues of inequity. If we have robust science, honorable intentions, and good communication strategies, what's missing? It's all about design thinking, especially 1) empathy with users, 2) a discipline of prototyping, and 3) a tolerance for failure. In this talk, we share lessons in design thinking from the University of Washington's Climate Impacts Group and Washington Ocean Acidification Center, cornerstones of our new environmental institute, EarthLab. Connecting deeply and authentically with the experiences of user communities is at the core of our work. Collaboration is an iterative process centered on prototyping adaptive strategies in partnership with users. Using this approach, the Climate Impacts Group informs decision making ranging from culvert design to the Endangered Species Act, building long-term capacity for adaptation at every stage of the process. In partnership with the shellfish industry, the Washington Ocean Acidification Center pioneers adaptive strategies to sustain shellfish production—and shellfish producers—in a rapidly changing ocean. Finally, we will open the messy can of worms that is tolerance for failure. How can we afford failure in the context of declining public trust and support for

Human Systems Integration in Practice: Constellation Lessons Learned

Science.gov (United States)

Zumbado, Jennifer Rochlis

2012-01-01

NASA's Constellation program provided a unique testbed for Human Systems Integration (HSI) as a fundamental element of the Systems Engineering process. Constellation was the first major program to have HSI mandated by NASA's Human Rating document. Proper HSI is critical to the success of any project that relies on humans to function as operators, maintainers, or controllers of a system. HSI improves mission, system and human performance, significantly reduces lifecycle costs, lowers risk and minimizes re-design. Successful HSI begins with sufficient project schedule dedicated to the generation of human systems requirements, but is by no means solely a requirements management process. A top-down systems engineering process that recognizes throughout the organization, human factors as a technical discipline equal to traditional engineering disciplines with authority for the overall system. This partners with a bottoms-up mechanism for human-centered design and technical issue resolution. The Constellation Human Systems Integration Group (HSIG) was a part of the Systems Engineering and Integration (SE&I) organization within the program office, and existed alongside similar groups such as Flight Performance, Environments & Constraints, and Integrated Loads, Structures and Mechanisms. While the HSIG successfully managed, via influence leadership, a down-and-in Community of Practice to facilitate technical integration and issue resolution, it lacked parallel top-down authority to drive integrated design. This presentation will discuss how HSI was applied to Constellation, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers. This presentation will discuss how Human Systems Integration (HSI) was applied to NASA's Constellation program, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers on how to accomplish this critical function.

Selected Lessons Learned over the ISS Design, Development, Assembly, and Operations: Applicability to International Cooperation for Standardization

Science.gov (United States)

Hirsch, David B.

2010-01-01

This slide presentation reviews some of the lessons learned in the sphere of international cooperation during the development, assembly and operation of the International Space Station. From the begining all Partners shared a common objective to build, operate and utilize a crewed laboratory in low orbit as an international partnership. The importance of standards is emphasized.

Safety in the Air: A Curriculum about Flight and Air Traffic Control Designed for Middle School Students.

Science.gov (United States)

Colton, Ted

This six-lesson unit is designed to familiarize sixth, seventh, and eighth grade students with air traffic safety and the individuals who make air traffic safety possible. Each lesson consists of a statement of the concept fostered, a list of objectives, a brief discussion on the focus of the unit, and instructional strategies for lesson topics…

Lessons from Goiania

International Nuclear Information System (INIS)

Nazari Alves, R.

2000-01-01

The lessons learned from the radiological accident of Goiania in 1987 derived from the observations from the Regulatory Agency which was in charge of the decontamination tasks may be consolidated into four classes: Preventive Actions, characterised as those that aim to minimise the probability of occurrence of a radiological accident; Minimisation of time between the moment of the accident occurrence and the beginning of intervention, in case a radiological accident does occur, despite all preventive measures; Intervention, which is correlated to the type of installation, its geographical location, the social classes involved and their contamination vectors; and Follow up, for which well established rules to allow continuing monitoring of the victims and rebuilding of homes are necessary. The greatest lesson of all was the need for integration of the professionals involved, from all organizations. (author)

Lessons learned on digital systems safety

International Nuclear Information System (INIS)

Sivertsen, Terje

2005-06-01

A decade ago, in 1994, lessons learned from Halden research activities on digital systems safety were summarized in the reports HWR-374 and HWR-375, under the title 'A Lessons Learned Report on Software Dependability'. The reports reviewed all activities made at the Halden Project in this field since 1977. As such, the reports provide a wealth of information on Halden research. At the same time, the lessons learned from the different activities are made more accessible to the reader by being summarized in terms of results, conclusions and recommendations. The present report provides a new lessons learned report, covering the Halden Project research activities in this area from 1994 to medio 2005. As before, the emphasis is on the results, conclusions and recommendations made from these activities, in particular how they can be utilized by different types of organisations, such as licensing authorities, safety assessors, power companies, and software developers. The contents of the report have been edited on the basis of input from a large number of Halden work reports, involving many different authors. Brief summaries of these reports are included in the last part of the report. (Author)