WorldWideScience

Sample records for lemna gibba electronic

  1. Bio-accumulation and toxicity of lead (Pb) in Lemna gibba L (duckweed).

    Science.gov (United States)

    Sobrino, Alma S; Miranda, Maria G; Alvarez, Carlos; Quiroz, Agustin

    2010-01-01

    The vascular aquatic plant Lemna gibba (duckweed) was exposed during seven days to lead (Pb) at concentrations ranging from 50 to 300 mg/L in a greenhouse with controlled photoperiod and temperature. The effects of Pb on growth of Lemna gibba were examined during 13 days in the same experimental design. The maximum accumulation of lead by Lemna gibba occurs during the third day in the 50 mg/L test, and at the sixth day, lead in all test concentrations produces approximately a 100% inhibitory effect on duckweed growth. In all tests, the maximum relative growth rates were achieved on the third day and then, the toxicity effects were: 59.3% total soluble starch reduction; 94.7% total soluble proteins reduction; 246% increase in total soluble amino acids; 50% increase in total soluble sugars and an 18.2% increase in total phenols. This experiment showed that the transfers of Pb from nutritive solution to plants were fast. Nevertheless, Pb produced toxic effects on Lemna gibba; however duckweed was able to remove Pb at the experimental concentrations used.

  2. Functional analysis of a Lemna gibba rbcS promoter regulated by ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Genetics; Volume 92; Issue 1. Functional analysis of a Lemna gibba rbcS ... Photosynthesis-associated nuclear genes (PhANGs) are able to respond to multiple environmental and developmental signals, including light, sugar and abscisic acid (ABA). PhANGs have been extensively studied at the ...

  3. Toxic Effects of Nickel Oxide Bulk and Nanoparticles on the Aquatic Plant Lemna gibba L.

    Directory of Open Access Journals (Sweden)

    Abdallah Oukarroum

    2015-01-01

    Full Text Available The aquatic plant Lemna gibba L. was used to investigate and compare the toxicity induced by 30 nm nickel oxide nanoparticles (NiO-NPs and nickel(II oxide as bulk (NiO-Bulk. Plants were exposed during 24 h to 0–1000 mg/L of NiO-NPs or NiO-Bulk. Analysis of physicochemical characteristics of nanoparticles in solution indicated agglomerations of NiO-NPs in culture medium and a wide size distribution was observed. Both NiO-NPs and NiO-Bulk caused a strong increase in reactive oxygen species (ROS formation, especially at high concentration (1000 mg/L. These results showed a strong evidence of a cellular oxidative stress induction caused by the exposure to NiO. Under this condition, NiO-NPs and NiO-Bulk induced a strong inhibitory effect on the PSII quantum yield, indicating an alteration of the photosynthetic electron transport performance. Under the experimental conditions used, it is clear that the observed toxicity impact was mainly due to NiO particles effect. Therefore, results of this study permitted determining the use of ROS production as an early biomarker of NiO exposure on the aquatic plant model L. gibba used in toxicity testing.

  4. Growth Recovery of Lemna gibba and Lemna minor Following a 7-Day Exposure to the Herbicide Diuron.

    Science.gov (United States)

    Burns, Mitchell; Hanson, Mark L; Prosser, Ryan S; Crossan, Angus N; Kennedy, Ivan R

    2015-08-01

    In agricultural catchments, aquatic ecosystems can experience a pulse exposure to pesticides. Following such exposure, non-target organisms that are not extirpated may recover. This paper investigates the potential of two duckweed species (Lemna minor and Lemna gibba) to recover from a 7-day exposure to different concentrations (0.4-208 µg L(-1)) of the herbicide diuron. There was significant inhibition in the growth and biomass after the initial 7-day exposure (e.g. frond number EC50=59.2 and 52.2 µg L(-1) for L. minor and L. gibba, respectively). Following transfer to clean media, recovery (the highest concentration yielding no significant difference in the effect endpoint from the control) was observed for all effects endpoints at concentrations ranging 60-111 µg L(-1) for L. minor and 60-208 µg L(-1) for L. gibba. These results suggest that recovery is possible for primary producers at environmentally relevant concentrations considered significant in ecological risk assessment.

  5. Removal of {sup 99m}Tc and {sup 201}Tl by means of Lemna Gibba; Remocion de {sup 99m}Tc y {sup 201}Tl mediante Lemna Gibba

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez R, E.; Carreno de L, M. C.; Cuevas S, J. C.; Hernadez T, U. O. [Instituto Tecnologico de Toluca, Av. Tecnologico s/n, Fraccionamiento La Virgen, 52149 Metepec, Estado de Mexico (Mexico); Monroy G, F., E-mail: edelmiraf@yahoo.com [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2012-10-15

    In this work the capacity of the water macrophyte Lemna gibba coming from San Pedro Tultepec in the Mexico State was studied to remove the radioisotopes {sup 99m}Tc and {sup 201}Tl, in order to show the capacity of this macrophyte for to treat some radioactive waste flowing that could contain this radioisotopes type. The removal capacity of {sup 99m}Tc and {sup 201}Tl of the macrophyte Lemna gibba was determined using the batch method. In accordance with the values of the obtained K{sub d}, the Lemna gibba with a size of particle diameter among 1mm - 300 {mu}m presents a better adsorption of {sup 99m}Tc. The {sup 201}Tl is adsorbed better in the bioadsorbent when it has a size of particle diameter <150{mu}m. (Author)

  6. Exogenous salicylate application affects the lead and copper accumulation characteristics of Lemna gibba L.

    Energy Technology Data Exchange (ETDEWEB)

    Duman, Fatih; Aksoy, Ahmet; Ozturk, Fatma; Ceylan, Ahmet [Erciyes Univ., Kayseri (Turkey). Dept. of Biology

    2010-11-15

    Previous studies have shown that salicylates can change the ion permeability of root cells. Therefore the possible effects of exogenous salicylate application on lead (Pb) and copper (Cu) accumulation and its protective role against DNA damage due to metal exposure in Lemna gibba were studied. L. gibba was exposed to 5, 10, and 25 {mu}M Pb and Cu for six days in the presence and absence of sodium salicylate (SA) (0.1, 0.5, and 1 mM). At all concentrations tested, SA application decreased Pb accumulation. On the other hand, application of 0.5 mM SA increased Cu accumulation. SA did not reduce DNA damage resulting from Pb and Cu toxicity. In summary, SA may be useful for reducing Pb accumulation, and application of SA at 0.5 mM may be useful for the phytoextraction of Cu. (orig.)

  7. Evaluation of the effects of diuron and its derivatives on Lemna gibba using a fluorescence toxicity index.

    Science.gov (United States)

    Dewez, David; Marchand, Mathieu; Eullaffroy, Philippe; Popovic, Radovan

    2002-10-01

    The herbicide diuron (DCMU) [3-(3,4-dichlorophenyl)-1,1-dimethylurea] is largely used in agricultural practices which contribute to water pollution in large areas. Its degradation induced by light or microbial activity is known to be a slow process, and may result in the accumulation of DCMU derivatives in the environment. In this report we used the yield of PSII variable fluorescence of Lemna gibba affected by the DCMU derivatives DCPMU [1-(3,4-dichlorophenyl)-3-methylurea], DCPU [1-(3,4-dichlorophenyl)urea], and DCA [3,4-dichloroaniline] to calculate the fluorescence toxicity index. We found the fluorescence toxicity index to be a useful parameter to evaluate the inhibitory effect on PSII electron transport in L. gibba exposed to DCMU and its derivatives. The variations observed for the inhibitory effect between DCMU and its derivatives seem to be caused by the modification of the dimethylurea group within the DCMU molecule. The fluorescence toxicity index demonstrated a strong quantitative dependency between the inhibitory effect of PSII electron transport and pollutant concentrations. We propose the fluorescence toxicity index to be a useful tool for future bioassays in evaluating the quality of water polluted with herbicides that induce an inhibition to PSII photochemistry. Copyright 2002 Wiley Periodicals, Inc.

  8. Effect of soluble copper released from copper oxide nanoparticles solubilisation on growth and photosynthetic processes of Lemna gibba L.

    Science.gov (United States)

    Perreault, François; Samadani, Mahshid; Dewez, David

    2014-06-01

    Copper oxide nanoparticles (CuO NPs) are used as a biocide in paints, textiles and plastics. Their application may lead to the contamination of aquatic ecosystems, where potential environmental effects remain to be determined. Toxic effects may be related to interactions of NPs with cellular systems or to particles' solubilisation releasing metal ions. In this report, we evaluated CuO NPs and soluble copper effects on photosynthesis of the aquatic macrophyte Lemna gibba L to determine the role of particle solubility in NPs toxicity. When L. gibba plants were exposed 48 h to CuO NPs or soluble copper, inhibition of photosynthetic activity was found, indicated by the inactivation of Photosystem II reaction centers, a decrease in electron transport and an increase of thermal energy dissipation. Toxicity of CuO NPs was mainly driven by copper ions released from particles. However, the bioaccumulation of CuO NPs in plant was shown, indicating the need to evaluate organisms of higher trophic level.

  9. Aquatic microcosm assessment of the effects of tylosin on Lemna gibba and Myriophyllum spicatum

    Energy Technology Data Exchange (ETDEWEB)

    Brain, Richard A. [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Bestari, Ketut [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Sanderson, Hans [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Hanson, Mark L. [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Wilson, Christian J. [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Johnson, David J. [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Sibley, Paul K. [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada); Solomon, Keith R. [Centre for Toxicology, Department of Environmental Biology, University of Guelph, Guelph, ON, N1G 2W1 (Canada)]. E-mail: ksolomon@uoguelph.ca

    2005-02-01

    Tylosin is a macrolide antibiotic commonly used for therapeutic treatment and prophylaxis in livestock. As part of a larger ecotoxicological study, the potential phytotoxic effects of tylosin on the rooted macrophyte Myriophyllum spicatum and the floating macrophyte Lemna gibba were assessed under semi-field conditions using 15 12000-L microcosms. Concentrations of 0, 10, 30, 300 {mu}g/L (n = 3), and 600, 1000, and 3000 {mu}g/L (n = 1) were evaluated as part of separate ANOVA and regression analyses over an exposure period of 35 days. Fate of tylosin was monitored over time in the highest three treatments, where dissipation followed pseudo-first order kinetics with associated half-lives ranging from 9 to 10 days. For both M. spicatum and L. gibba, tylosin was found to cause no biologically significant changes to any endpoint assessed compared to controls at a Type I error rate of 0.1. However, subsequent power analyses revealed that there was generally insufficient power to declare that there were no significant differences at a Type II error rate of 0.2. Conclusions concerning biologically significant impacts were therefore further assessed based on other statistical criteria including comparisons of percent differences between replicated treatments and controls, minimum significant and minimum detectable differences, and coefficients of variation. Based on these criteria, at an ecological effect size of >20% change, tylosin was concluded to elicit no biologically or ecologically significant toxicity to M. spicatum or L. gibba. A hazard quotient assessment indicated that tylosin poses little risk to either species of macrophyte, with an HQ value calculated to be nearly three orders of magnitude below 1 (0.002). - Tylosin is not expected to have ecologically significant effects on Ontario freshwater macrophytes.

  10. Oxygen and hydrogen isotope fractionation during cellulose metabolism in Lemna gibba L

    International Nuclear Information System (INIS)

    Yakir, D.; DeNiro, M.J.

    1990-01-01

    Lemna gibba L. B3 was grown under heterotrophic, photoheterotrophic, and autotrophic conditions in water having a variety of hydrogen and oxygen isotopic compositions. The slopes of the linear regression lines between the isotopic composition of water and leaf cellulose indicated that under the three growth conditions about 40, 70, and 100% of oxygens and carbon-bound hydrogens of cellulose exchanged with those of water prior to cellulose formation. Using the equations of the linear relationships, we estimated the overall fractionation factors between water and the exchanged oxygen and carbon bound-hydrogen of cellulose. At least two very different isotope effects must determine the hydrogen isotopic composition of Lemna cellulose. One reflects the photosynthetic reduction of NADP, while the second reflects exchange reactions that occur subsequent to NADP reduction. Oxygen isotopic composition of cellulose apparently is determined by a single type of exchange reaction with water. Under different growth conditions, variations in metabolic fluxes affect the hydrogen isotopic composition of cellulose by influencing the extent to which the two isotope effects mentioned above are recorded. The oxygen isotopic composition of cellulose is not affected by such changes in growth conditions

  11. Potentiation of aquatic pollution by ethylene glycol with regard to the aquatic angiosperm, Lemna gibba

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, D.A.; Barber, J.T.; Yatsu, L.Y.; Ensley, H.E. [Tulane Univ., New Orleans, LA (United States). Dept. of Ecology, Evolution and Organismal Biology

    1995-12-31

    Ethylene glycol is usually thought of as a benign component of urban runoff. Thus, its EC50 value, with regard to the vegetative growth of axenically grown Lemna gibba, is relatively high, viz. 164 mM. Ethylene glycol is not metabolized by Lemna but growth is demonstrably stimulated at concentrations below 75 mM. In the presence of ethylene glycol, the fronds of duckweed are dark green, translucent and the growth medium contains gas bubbles of carbon dioxide which result from an enhanced uptake of sucrose from the growth medium and its subsequent respiration. The uptake is a non-specific effect since the uptake of various other compounds, including water, is enhanced when duckweed is grown in the presence of ethylene glycol. The increased uptake of water, sucrose, inorganic ions and organic compounds results from an increased permeability due to the creation of intercellular holes in the aerenchymatous tissues of the ethylene glycol-treated plants. The mechanism by which ethylene glycol causes the holes is unknown but may involve a disruption in lipid metabolism since the hydrophobicity of the fronds is altered and their lipid composition is changed. The significance of this phenomenon is that toxicants, just like innocuous substances, are taken up in increased amounts by treated plants and as a result their toxicities are increased with regard to duckweed as evidenced by a decrease in their effective concentrations, often of more than 3-fold. These results suggest that although ethylene glycol itself may be benign, its presence in polluted waters containing other toxicants may potentiate the effects of those pollutants.

  12. Toxicity of 14 photooxidized anthracene derivatives to Lemna gibba L.G-3

    Energy Technology Data Exchange (ETDEWEB)

    Mallakin, A.; MacConkey, B.J.; McKibbenyen, B.; Sniekusyen, V.; Dixon, D.G.; Greenberg, B.M. [Univ. of Waterloo, Ontario (Canada)

    1995-12-31

    Phototoxicity of PAHs is known to occur via photosensitization reactions and potentially by photomodification of chemicals to more toxic species. The hazards enhancement of polycyclic aromatic hydrocarbon (PAHs) toxicity to plants by artificial light source and natural solar radiation has been recently demonstrated. Growth and chlorosis were used as end points to assess the photoinduced toxicity to 14 oxygenated anthracene derivatives to Lemna gibba. Reversed-phase liquid chromatography (HPLC) equipped with diode array detector was used as analytical technique for measurement of polycyclic aromatic hydrocarbons photomodification products and to study the modification kinetics. The toxicity bioassays were performed both under visible light and simulated solar radiation (SSR), which mimicked the relative load of UV + visible light in solar radiation. Comparative studies with visible and SSR showed that the phototoxicity of these chemicals was activated, with UV radiation being the most influenced spectral region in enhancing the harmful effects of the chemicals. Photomodified PAHs exhibited toxicity in visible light and increased toxicity in simulate solar radiation. The rates of photomodification of chemicals were quite different but rapid enough to contribute to toxicity. There was increase in inhibition of growth of plants, relative to control, with increasing in rate of photomodification of the oxygenated PAHs.

  13. Boron removal by the duckweed Lemna gibba: a potential method for the remediation of boron-polluted waters.

    Science.gov (United States)

    Del-Campo Marín, Claudia M; Oron, Gideon

    2007-12-01

    Boron (B) is often found in polluted and desalinated waters. Despite its potentially environmental damaging effects, efficient treatments are lacking. The duckweed Lemna gibba has been shown to remove toxic elements from water; however, its applicability to B removal is unknown. In this study, L. gibba was examined for its tolerance to B in water and its B removal efficiency. Duckweed plants were grown in outdoor 12-day batch experiments in nutrient solution containing 0.3-10 mg B L(-1). Plant biomass production was not affected by B over the tested concentrations during the 12-day cultivation period. Boron removal and the bioconcentration factor of B in L. gibba were highest at initial B concentrations below 2 mg L(-1), and decreased as the initial B concentration increased. Boron content in the plants at the end of the experiment ranged between 930 and 1900 mg kg(-1) dry weight, and was comparable to that of wetland plants reported to be good B accumulators. Boron removal by L. gibba may therefore be a suitable option for the treatment of water containing B concentrations below 2 mg L(-1).

  14. Toxicity and metabolism of 2,4-dichlorophenol by the aquatic angiosperm Lemna gibba

    Energy Technology Data Exchange (ETDEWEB)

    Ensley, H.E. (Tulane Univ., New Orleans, LA (United States). Dept. of Chemistry); Barber, J.T.; Polito, M.A.; Oliver, A.I. (Tulane Univ., New Orleans, LA (United States). Dept. of Ecology, Evolution, and Organismal Biology)

    1994-02-01

    The toxicity and metabolism of 2,4-dichlorophenol with regard to the aquatic macrophyte Lemna gibba (duckweed), have been studied. Toxicity is described in terms of the effect of 2,4-dichlorophenol (2,4-DCP) on the vegetative reproduction of duckweed over a 10-d growth period; the EC10 and EC50 were 2.5 and 9.2 [mu]M, respectively. Metabolism of 2,4-dichlorophenol was monitored by incubation of the plants with radiolabeled substrate, and periodic sampling and analysis by reversed-phase HPLC of the plant growth medium. Depending on the growth conditions, up to 95% of the 2,4-DCP was metabolized over a 6-d growth period. To analyze the metabolites, the plants were grown in the presence of sublethal concentrations of [U-[sup 14]C]-2,4-DCP. The growth medium was lyophilized and then mixed with the plants, extracted, and analyzed using reversed-phase HPLC, followed by scintillation counting of the fractions. The major metabolite was isolated and identified as 2,4-dichlorophenol-[beta]-D-glucopyranoside by high-field NMR and MS. The structure of the metabolite was confirmed by synthesis and by enzymatic cleavage of the [beta]-glucosidic linkage to afford 2,4-DCP. An important consequence of conjugate formation is the masking of the presence of 2,4-DCP to the usual analytical techniques used for its detection and quantitation. This finding is probably applicable to other contaminants and organisms.

  15. Bioaccumulation and toxicity assessment of irrigation water contaminated with boron (B) using duckweed (Lemna gibba L.) in a batch reactor system.

    Science.gov (United States)

    Türker, Onur Can; Yakar, Anıl; Gür, Nurcan

    2017-02-15

    The present study assesses ability of Lemna gibba L. using a batch reactor approach to bioaccumulation boron (B) from irrigation waters which were collected from a stream in largest borax reserve all over the world. The important note that bioaccumulation of B from irrigation water was first analyzed for first time in a risk assessment study using a Lemna species exposed to various B concentrations. Boron toxicity was evaluated through plant growth and biomass production during phytoremediation process. The result from the present experiment indicated that L. gibba was capable of removing 19-63% B from irrigation water depending upon contaminated level or initial concentration. We also found that B was removed from aqueous solution following pseudo second order kinetic model and Langmuir isotherm model better fitted equilibrium obtained for B phytoremediation. Maximum B accumulation in L. gibba was determined as 2088mgkg -1 at average inflow B concentration 17.39mgL -1 at the end of the experiment. Conversely, maximum bioconcentration factor obtained at lowest inflow B concentrations were 232 for L. gibba. The present study suggested that L. gibba was very useful B accumulator, and thus L. gibba-based techniques could be a reasonable phytoremediation option to remove B directly from water sources contaminated with B. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Influence of pH, light cycle, and temperature on ecotoxicity of four sulfonylurea herbicides towards Lemna gibba

    DEFF Research Database (Denmark)

    Rosenkrantz, Rikke Tjørnhøj; Cedergreen, Nina; Baun, Anders

    2013-01-01

    In chemical regulation, e.g. the EU Water Framework Directive, REACH, or the Pesticide Directive, standardized ecotoxicological tests are applied to evaluate and rank the hazard of compounds and for deriving environmental quality standards (EQS). Standardized test methods prescribe fixed testing...... conditions e.g. specific temperature, pH, light intensity etc. However, environmental conditions under which the organisms live are rarely identical to the standard conditions. Thus, the ecotoxicity of compounds found in standard test is not only a function of the compounds inherent physico...... test conditions on the toxicity of four sulfonylurea herbicides (SUs). The toxicity of the four SUs towards Lemna gibba was investigated at three pH levels (6, 7.5 and 9), at two temperatures (15 and 24 °C) and two light regimes (continuous and 12:12 h light:dark cycle) The EC50 increased twofold...

  17. A combination method based on chitosan adsorption and duckweed (Lemna gibba L.) phytoremediation for boron (B) removal from drinking water.

    Science.gov (United States)

    Türker, Onur Can; Baran, Talat

    2018-01-28

    The metalloid boron (B) and its compounds widely exist in the environment, and boron can have hazardous effects on plants, animals, and human beings when it is found in high concentrations in water bodies. It is difficult and costly to remove B with conventional treatment methods from drinking water. Therefore, alternative and cost-effective treatment techniques are necessary. In this study, for the first time, a novel and environmentally friendly method based on the phytoremediation ability of chitosan and duckweed (Lemna gibba L.) combination was evaluated for B removal from drinking water. Our results from batch adsorption experiment indicated that the highest B uptake capacity of chitosan bead was found as 3.18 mg/g, and we determined the optimal B sorption occurs at pH value of 7. The Langmuir isotherm and pseudo-second-order kinetic model better fitted the equilibrium obtained for B removal. B in drinking water could be reduced to less than 2.4 mg L -1 when 0.05 g of plant-based chitosan beads and 12 L. gibba fronds were used in the 4-day treatment period.

  18. Evaluation and application of an innovative method based on various chitosan composites and Lemna gibba for boron removal from drinking water.

    Science.gov (United States)

    Türker, Onur Can; Baran, Talat

    2017-06-15

    Boron exists in various types of water environments, and it is difficult and costly to remove B with conventional treatment methods from drinking water. Clearly, alternative and cost effective treatment techniques are imperative. In the present study, an innovative and environment friendly method based on hybrid systems consisting of various chitosan composite beads and Lemna gibba were evaluated for removal of B from drinking water. Our results from batch adsorption experiment indicated that a plant-based chitosan composite bead has a higher capacity of B removal than mineral-based chitosan composite beads. Almost 50% of total B removal was achieved using the hybrid system based on dried Lemna-chitosan composite beads and Lemna gibba combination in 4 days. Even at the high B concentration (8mgBL -1 ), B in drinking water could be reduced to less than 2.4mgL -1 when 0.05g plant-based chitosan composite beads and 12 Lemna fronds were used for 50mL test solution. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Efecto del fotoperiodo en la remoción de plomo por Lemna gibba L. (Lemnaceae

    Directory of Open Access Journals (Sweden)

    Guadalupe Miranda

    2015-08-01

    Full Text Available El plomo llega a las aguas provenientes de las industrias de baterías, soldaduras, pinturas, etc. causando daños a los seres vivos, por lo que es necesario promover el desarrollo de tecnologías que ayuden a mejorar la calidad de los efluentes y que al mismo tiempo sean adecuadas al contexto socioeconómico del país. En este trabajo se plantea el uso de una angiosperma acuática, la especieLemna gibbade la familia Lemnaceae que tiene un crecimiento exponencial y su cultivo es fácil en laboratorio. Para absorber el plomo (PbNO32 se prepararon cinco concentraciones, a nivel de bioensayo en el laboratorio y bajo el efecto de dos diferentes condiciones de fotoperiodo (luz continua y 12 h luz/12 h oscuridad durante cuatro días, ya que a partir de este día libera el Pb al medio. Los resultados indican que en las dos concentraciones de Pb más bajas (30 y 50 mgl-1, el fotoperiodo 12/12 es más favorable para su absorción (9405 µgl-1más y 18,895 µgl-1 más respectivamente mientras que en las tres restantes (100, 200 y 300 mgl-1 lo fue la condición de luz continua. (6600 µgl-1, 1949 µgl-1, 5587 µgl-1 más respectivamente. Los conocimientos que se derivan de este estudio, permiten optimizar el uso deL. gibbaen el tratamiento terciario de aguas residuales.

  20. Comparison of salicylic acid, benzoic acid and p-hydroxybenzoic acid for their ability to induce flowering in Lemna Gibba G3

    International Nuclear Information System (INIS)

    Cleland, F.C.; Kang, B.G.; Khurana, J.P.

    1986-01-01

    The long-day plant Lemna gibba G3 fails to flower under continuous light on NH 4 + -free 0.5 H medium. This inhibition is completely reversed by 10 μM salicyclic acid (SA) or 32 μM benzoic acid (BA). By contrast, p-hydroxybenzoic acid (p-OH-BA) has virtually no effect on flowering at levels as high as 320 μM. Uptake rates for the three compounds are comparable. Competition studies using 14 C-SA indicate that, compared to SA, BA is about 10-fold less effective and p-OH-BA is nearly 100-fold less effective in competing against 14 C-SA uptake. Both the effectiveness of SA for inducing flowering and the uptake of 14 C-SA are substantially increased as the pH of the medium is lowered from 8 to 4.5. Under a nitrogen atmosphere the uptake of 14 C-SA is partially inhibited above pH 5. Phosphate metabolism may be important for flowering since increasing the phosphate level in the medium 10-15 fold results in substantial flowering, and suboptimal levels of Sa and phosphate interact synergistically to stimulate flowering. The interaction of phosphate with BA and p-OH-BA will be presented

  1. Effects of Homeopathic Arsenicum Album, Nosode, and Gibberellic Acid Preparations on the Growth Rate of Arsenic-Impaired Duckweed (Lemna gibba L.

    Directory of Open Access Journals (Sweden)

    Tim Jäger

    2010-01-01

    Full Text Available This study evaluated the effects of homeopathically potentized Arsenicum album, nosode, and gibberellic acid in a bioassay with arsenic-stressed duckweed (Lemna gibba L.. The test substances were applied in nine potency levels (17x, 18x, 21x–24x, 28x, 30x, 33x and compared with controls (unsuccussed and succussed water regarding their influence on the plant’s growth rate. Duckweed was stressed with arsenic(V for 48 h. Afterwards, plants grew in either potentized substances or water controls for 6 days. Growth rates of frond (leaf area and frond number were determined with a computerized image analysis system for different time intervals (days 0–2, 2–6, 0–6. Five independent experiments were evaluated for each test substance. Additionally, five water control experiments were analyzed to investigate the stability of the experimental setup (systematic negative control experiments. All experiments were randomized and blinded. The test system exhibited a low coefficient of variation (≈1%. Unsuccussed and succussed water did not result in any significant differences in duckweed growth rate. Data from the control and treatment groups were pooled to increase statistical power. Growth rates for days 0–2 were not influenced by any homeopathic preparation. Growth rates for days 2–6 increased after application of potentized Arsenicum album regarding both frond area (p < 0.001 and frond number (p < 0.001, and by application of potentized nosode (frond area growth rate only, p < 0.01. Potencies of gibberellic acid did not influence duckweed growth rate. The systematic negative control experiments did not yield any significant effects. Thus, false-positive results can be excluded with high certainty. To conclude, the test system with L. gibba impaired by arsenic(V was stable and reliable. It yielded evidence for specific effects of homeopathic Arsenicum album preparations and it will provide a valuable tool for future experiments that aim at

  2. Comparing the acute sensitivity of growth and photosynthetic endpoints in three Lemna species exposed to four herbicides.

    Science.gov (United States)

    Park, Jihae; Brown, Murray T; Depuydt, Stephen; Kim, Jang K; Won, Dam-Soo; Han, Taejun

    2017-01-01

    An ecological impact assessment of four herbicides (atrazine, diuron, paraquat and simazine) was assessed using the aquatic floating vascular plants, Lemna gibba, Lemna minor and Lemna paucicostata as test organisms. The sensitivity of several ecologically relevant parameters (increase in frond area, root length after regrowth, maximum and effective quantum yield of PSII and maximum electron transport rate (ETR max ), were compared after a 72 h exposure to herbicides. The present test methods require relatively small sample volume (3 mL), shorter exposure times (72 h), simple and quick analytical procedures as compared with standard Lemna assays. Sensitivity ranking of endpoints, based on EC 50 values, differed depending on the herbicide. The most toxic herbicides were diuron and paraquat and the most sensitive endpoints were root length (6.0-12.3 μg L -1 ) and ETR max (4.7-10.3 μg L -1 ) for paraquat and effective quantum yield (6.8-10.4 μg L -1 ) for diuron. Growth and chlorophyll a fluorescence parameters in all three Lemna species were sensitive enough to detect toxic levels of diuron and paraquat in water samples in excess of allowable concentrations set by international standards. CV values of all EC 50 s obtained from the Lemna tests were in the range of 2.8-24.33%, indicating a high level of repeatability comparable to the desirable level of herbicides in aquatic ecosystems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Response of Lemna minor L. to short-term cobalt exposure: The effect on photosynthetic electron transport chain and induction of oxidative damage

    Energy Technology Data Exchange (ETDEWEB)

    Begović, Lidija, E-mail: lbegovic@biologija.unios.hr [Josip Juraj Strossmayer University of Osijek, Department of Biology, Ulica cara Hadrijana 8/A, H R -31000 Osijek (Croatia); Mlinarić, Selma, E-mail: smlinaric@biologija.unios.hr [Josip Juraj Strossmayer University of Osijek, Department of Biology, Ulica cara Hadrijana 8/A, H R -31000 Osijek (Croatia); Antunović Dunić, Jasenka, E-mail: jantunovic@biologija.unios.hr [Josip Juraj Strossmayer University of Osijek, Department of Biology, Ulica cara Hadrijana 8/A, H R -31000 Osijek (Croatia); Katanić, Zorana, E-mail: zkatanic@biologija.unios.hr [Josip Juraj Strossmayer University of Osijek, Department of Biology, Ulica cara Hadrijana 8/A, H R -31000 Osijek (Croatia); Lončarić, Zdenko, E-mail: zdenko.loncaric@pfos.hr [Faculty of Agriculture, Josip Juraj Strossmayer University of Osijek, Ulica kralja Petra Svačića 1d, H R -31000 Osijek (Croatia); Lepeduš, Hrvoje, E-mail: hlepedus@yahoo.com [Faculty of Humanities and Social Sciences, Josip Juraj Strossmayer University of Osijek, Lorenza Jägera 9, HR-31000 Osijek (Croatia); Cesar, Vera, E-mail: vcesarus@yahoo.com [Josip Juraj Strossmayer University of Osijek, Department of Biology, Ulica cara Hadrijana 8/A, H R -31000 Osijek (Croatia)

    2016-06-15

    Highlights: • Cobalt (Co{sup 2+}) impaired the function of oxygen evolving complex (OEC) in L. minor L. • Electron transport through PSII components varied depending on Co{sup 2+} concentration. • K-band was proven to be suitable parameter for investigation of Co{sup 2+} toxicity. • Increased lipid peroxidation level showed early oxidative damage induced by Co{sup 2+}. - Abstract: The effect of two concentrations of cobalt (Co{sup 2+}) on photosynthetic activity and antioxidative response in Lemna minor L. were assessed 24, 48 and 72 h after the start of the exposure. Higher concentration of cobalt (1 mM) induced growth inhibition while lower concentration (0.01 mM) increased photosynthetic pigments content. Analysis of chlorophyll a fluorescence transients revealed high sensitivity of photosystem II primary photochemistry to excess of Co{sup 2+} especially at the higher concentration where decreased electron transport beyond primary quinone acceptor Q{sub A}{sup −} and impaired function of oxygen evolving complex (OEC) was observed. Due to impairment of OEC, oxygen production was decreased at higher Co{sup 2+} concentration. Activity of superoxide dismutase was mainly inhibited while lipid peroxidation increased, at both concentrations, indicating that cobalt-induced oxidative damage after short exposure and moreover, susceptibility of the membranes in the cell to cobalt toxicity. Results obtained in this study suggest possible application of used parameters as tools in assessment of early damage caused by metals.

  4. Growth inhibition and recovery of Lemna gibba after pulse exposure to sulfonylurea herbicides

    DEFF Research Database (Denmark)

    Rosenkrantz, Rikke Tjørnhøj; Baun, Anders; Kusk, Kresten Ole

    2013-01-01

    The exposure of non-target aquatic organisms to pesticides often happens as short-term, high exposure events (pulses) and effects of these must be addressed in the current regulation in the EU. It is, however, questionable whether the effects of pulse exposures are adequately covered by the stand......The exposure of non-target aquatic organisms to pesticides often happens as short-term, high exposure events (pulses) and effects of these must be addressed in the current regulation in the EU. It is, however, questionable whether the effects of pulse exposures are adequately covered...... by the standardized ecotoxicological tests used in environmental effect assessments, since these aim at maintaining constant exposure concentrations during the incubation. Therefore, we investigated the effects of four sulfonylurea herbicides (flupyrsulfuron-methyl, metsulfuron-methyl, rimsulfuron, and thifensulfuron...... tests. The approach of this study enables experimentally based comparisons between observations of effects between the two exposure regimes. We propose that results obtained in this way be applied in effect assessments for intermittent releases....

  5. Functional analysis of a Lemna gibba rbcS promoter regulated by ...

    Indian Academy of Sciences (India)

    2013-04-12

    Apr 12, 2013 ... controlled expression of a foreign gene using the chalcone syn- thase promoter in tobacco BY-2 cells. J. Ferment. Bioeng. 86,. 317–323. Laby R. J., Kincaid M. S., Kim D. and Gibson S. I. 2000. The Arabidopsis sugar-insensitive mutants sis4 and sis5 are defective in abscisic acid synthesis and response.

  6. Rhizobium lemnae sp. nov., a bacterial endophyte of Lemna aequinoctialis.

    Science.gov (United States)

    Kittiwongwattana, Chokchai; Thawai, Chitti

    2014-07-01

    Bacterial strain L6-16(T) was isolated from Lemna aequinoctialis. Cells were Gram-stain-negative, rod-shaped and motile with monopolar flagella. The phylogenetic analysis of its nearly complete 16S rRNA gene sequence revealed that strain L6-16(T) was a member of the genus Rhizobium. Its closest relative was Rhizobium tarimense PL-41(T) with a 16S rRNA gene sequence similarity value of 98.3%. Sequence similarity analysis of the housekeeping recA and atpD genes showed low levels of sequence similarity (Rhizobium. Strain L6-16(T) was able to grow between pH 5 and 11 (optimum 7.0) and at temperatures ranging from 20 to 41 °C (optimum 30 °C). It tolerated NaCl up to 1 % (w/v) (optimum 0.5%). C18 : 1ω7c and/or C18 :  1ω6c (summed feature 8; 79.5%) were found as predominant cellular fatty acids. The DNA G+C content of strain L6-16(T) was 58.1 mol% (Tm). Based on low levels of DNA-DNA relatedness, strain L6-16(T) was distinct from members of phylogenetically related species including R. tarimense PL-41(T) (38.3 ± 0.8%), Rhizobium rosettiformans W3(T) (6.9 ± 0.4%) and Rhizobium pseudoryzae J3-A127(T) (12.3 ± 0.6 %). Strain L6-16(T) was unable to nodulate the roots of Phaseolus vulgaris, and nodC and nifH genes were not detected. The results obtained from phylogenetic analyses, phenotypic characterization and DNA-DNA hybridization indicated that strain L6-16(T) represents a novel species of the genus Rhizobium, for which the name Rhizobium lemnae sp. nov. is proposed. The type strain is L6-16(T) ( = NBRC 109339(T) = BCC 55143(T)). © 2014 IUMS.

  7. Genome-wide analysis of adaptive molecular evolution in the carnivorous plant Utricularia gibba.

    Science.gov (United States)

    Carretero-Paulet, Lorenzo; Chang, Tien-Hao; Librado, Pablo; Ibarra-Laclette, Enrique; Herrera-Estrella, Luis; Rozas, Julio; Albert, Victor A

    2015-01-09

    The genome of the bladderwort Utricularia gibba provides an unparalleled opportunity to uncover the adaptive landscape of an aquatic carnivorous plant with unique phenotypic features such as absence of roots, development of water-filled suction bladders, and a highly ramified branching pattern. Despite its tiny size, the U. gibba genome accommodates approximately as many genes as other plant genomes. To examine the relationship between the compactness of its genome and gene turnover, we compared the U. gibba genome with that of four other eudicot species, defining a total of 17,324 gene families (orthogroups). These families were further classified as either 1) lineage-specific expanded/contracted or 2) stable in size. The U. gibba-expanded families are generically related to three main phenotypic features: 1) trap physiology, 2) key plant morphogenetic/developmental pathways, and 3) response to environmental stimuli, including adaptations to life in aquatic environments. Further scans for signatures of protein functional specialization permitted identification of seven candidate genes with amino acid changes putatively fixed by positive Darwinian selection in the U. gibba lineage. The Arabidopsis orthologs of these genes (AXR, UMAMIT41, IGS, TAR2, SOL1, DEG9, and DEG10) are involved in diverse plant biological functions potentially relevant for U. gibba phenotypic diversification, including 1) auxin metabolism and signal transduction, 2) flowering induction and floral meristem transition, 3) root development, and 4) peptidases. Taken together, our results suggest numerous candidate genes and gene families as interesting targets for further experimental confirmation of their functional and adaptive roles in the U. gibba's unique lifestyle and highly specialized body plan. © The Author(s) 2015. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

  8. High Gene Family Turnover Rates and Gene Space Adaptation in the Compact Genome of the Carnivorous Plant Utricularia gibba.

    Science.gov (United States)

    Carretero-Paulet, Lorenzo; Librado, Pablo; Chang, Tien-Hao; Ibarra-Laclette, Enrique; Herrera-Estrella, Luis; Rozas, Julio; Albert, Victor A

    2015-05-01

    Utricularia gibba is an aquatic carnivorous plant with highly specialized morphology, featuring fibrous floating networks of branches and leaf-like organs, no recognizable roots, and bladder traps that capture and digest prey. We recently described the compressed genome of U. gibba as sufficient to control the development and reproduction of a complex organism. We hypothesized intense deletion pressure as a mechanism whereby most noncoding DNA was deleted, despite evidence for three independent whole-genome duplications (WGDs). Here, we explore the impact of intense genome fractionation in the evolutionary dynamics of U. gibba's functional gene space. We analyze U. gibba gene family turnover by modeling gene gain/death rates under a maximum-likelihood statistical framework. In accord with our deletion pressure hypothesis, we show that the U. gibba gene death rate is significantly higher than those of four other eudicot species. Interestingly, the gene gain rate is also significantly higher, likely reflecting the occurrence of multiple WGDs and possibly also small-scale genome duplications. Gene ontology enrichment analyses of U. gibba-specific two-gene orthogroups, multigene orthogroups, and singletons highlight functions that may represent adaptations in an aquatic carnivorous plant. We further discuss two homeodomain transcription factor gene families (WOX and HDG/HDZIP-IV) showing conspicuous differential expansions and contractions in U. gibba. Our results 1) reconcile the compactness of the U. gibba genome with its accommodation of a typical number of genes for a plant genome, and 2) highlight the role of high gene family turnover in the evolutionary diversification of U. gibba's functional gene space and adaptations to its unique lifestyle and highly specialized body plan. © The Author 2015. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. The Metagenome of Utricularia gibba's Traps: Into the Microbial Input to a Carnivorous Plant

    Science.gov (United States)

    Alcaraz, Luis David; Martínez-Sánchez, Shamayim; Torres, Ignacio; Ibarra-Laclette, Enrique; Herrera-Estrella, Luis

    2016-01-01

    The genome and transcriptome sequences of the aquatic, rootless, and carnivorous plant Utricularia gibba L. (Lentibulariaceae), were recently determined. Traps are necessary for U. gibba because they help the plant to survive in nutrient-deprived environments. The U. gibba's traps (Ugt) are specialized structures that have been proposed to selectively filter microbial inhabitants. To determine whether the traps indeed have a microbiome that differs, in composition or abundance, from the microbiome in the surrounding environment, we used whole-genome shotgun (WGS) metagenomics to describe both the taxonomic and functional diversity of the Ugt microbiome. We collected U. gibba plants from their natural habitat and directly sequenced the metagenome of the Ugt microbiome and its surrounding water. The total predicted number of species in the Ugt was more than 1,100. Using pan-genome fragment recruitment analysis, we were able to identify to the species level of some key Ugt players, such as Pseudomonas monteilii. Functional analysis of the Ugt metagenome suggests that the trap microbiome plays an important role in nutrient scavenging and assimilation while complementing the hydrolytic functions of the plant. PMID:26859489

  10. The Metagenome of Utricularia gibba's Traps: Into the Microbial Input to a Carnivorous Plant.

    Directory of Open Access Journals (Sweden)

    Luis David Alcaraz

    Full Text Available The genome and transcriptome sequences of the aquatic, rootless, and carnivorous plant Utricularia gibba L. (Lentibulariaceae, were recently determined. Traps are necessary for U. gibba because they help the plant to survive in nutrient-deprived environments. The U. gibba's traps (Ugt are specialized structures that have been proposed to selectively filter microbial inhabitants. To determine whether the traps indeed have a microbiome that differs, in composition or abundance, from the microbiome in the surrounding environment, we used whole-genome shotgun (WGS metagenomics to describe both the taxonomic and functional diversity of the Ugt microbiome. We collected U. gibba plants from their natural habitat and directly sequenced the metagenome of the Ugt microbiome and its surrounding water. The total predicted number of species in the Ugt was more than 1,100. Using pan-genome fragment recruitment analysis, we were able to identify to the species level of some key Ugt players, such as Pseudomonas monteilii. Functional analysis of the Ugt metagenome suggests that the trap microbiome plays an important role in nutrient scavenging and assimilation while complementing the hydrolytic functions of the plant.

  11. Production and characterization of Lemna minor bio-char and its catalytic application for biogas reforming

    International Nuclear Information System (INIS)

    Muradov, Nazim; Fidalgo, Beatriz; Gujar, Amit C.; Garceau, Nathaniel; T-Raissi, Ali

    2012-01-01

    Pyrolysis of fast-growing aquatic biomass - Lemna minor (commonly known as duckweed) with the emphasis on production, characterization and catalytic application of bio-char is reported in this paper. The yield of bio-char was determined as a function of L. minor pyrolysis temperature and sweep gas flow rate. It was found that the pore development during L. minor pyrolysis was not significant and the changes in the reaction conditions (temperature and sweep gas flow rate) did not alter markedly the textural characteristics and BET surface area of the bio-char produced. Thermogravimetric/differential thermogravimetric (TG/DTG) analyses of L. minor and different bio-char samples in inert (helium) and oxidative (air) media showed substantial differences in their TG/DTG patterns. A comparison of scanning electron micrographs (SEM) of L. minor, bio-char and ash indicated that the basic structural features of L. minor remained intact and were not affected by thermolysis. The inorganic ash content of L. minor derived bio-char is significantly higher than that of typical terrestrial (plant) biomass. The energy dispersive spectroscopic (EDS) analysis of L. minor ash showed that it mostly consisted of silica, and small quantities of Na, K and Ca compounds. The treatment of bio-char with CO 2 at 800 °C increased its BET surface area. It was found that CO 2 -treated bio-char exhibited appreciable initial catalytic activity in biogas reforming. -- Highlights: ► New data on characterization of bio-chars derived from Lemna minor are presented. ► Effect of pyrolysis operational parameters on bio-char properties is determined. ► Basic skeletal structure of Lemna minor leaflets does not change during pyrolysis. ► Bio-chars show an appreciable initial catalytic activity for biogas reforming.

  12. Phenolic compounds of ethanol extracts of Lemna minor L., Lemna trisulca L. and Lemna polyrrhiza L. Schleid and their immunomodulating activity

    Directory of Open Access Journals (Sweden)

    Sergazy M. Adekenov

    2017-01-01

    Full Text Available The purpose of the study is to determine the composition of the phenolic compounds of ethanol extracts isolated from three species of duckweed: Lemna minor L., Lemna trisulca L. and Lemna polyrrhiza L. (the synonym is Spirodella polyrrhiza Schleid. and to study its effect on immune system activation.Materials and methods. The objects of the study are: air-dried grass samples of Lemna minor L., Lemna trisuica L. and Lemna polyrrhiza L. collected during their growing season in 2010–2011 in low-flow and stagnant ponds of Kozhevnikovsky and Tomsk districts of Tomsk region. Isolation of polyphenolic complexes (PFC was carried out by extraction of air-dried raw material with ethyl alcohol. In qualitative and quantitative analysis of the samples studied the method of reversed-phase high-performance liquid chromatography on an Agilent 1100 Series instrument (USA was used in isocratic mode. In the experiments, 200 male C57BL / 6 and BALB / C mice aged 8–12 weeks were used to determine immunomodulatory activity. Cell proliferation was assessed by a colorimetric method. The absorption of the obtained solutions was measured with a multi-channel spectrophotometer at the wavelength of 540 nm. The determination of antibody-forming cells in the spleen was performed by local hemolysis. The titer of antibodies in serum was evaluated in the hemagglutination reaction. The local hypersensitivity reaction of immediate type was assessed by the author’s modification.Results. For the first time the study of the qualitative composition and quantitative content of PFC of Lemna minor L. (LM , Lemna trisulca L. (LT trisulkas, and Lemna polyrrhiza L. (LP : (4,7 ± 0,4%, (3,3 ± 0,3%, (12,8 ± 0,7% was carried out. The highest content of phenolic acids (10,76% and the sum of flavonoids, isoflavonoids and coumarins (14,7% were found in the LP sample. The content of chlorogenic and 3,5-dihydroxybenzoic acids was 2–9 times higher in LP than in other species of duckweed

  13. Analyzing shell size variability in the opportunistic bivalve Corbula gibba: comparing Recent and fossil data

    Science.gov (United States)

    Tomášových, Adam; Fuksi, Tomáš; Zuschin, Martin

    2017-04-01

    Corbula gibba is a first-order opportunistic bivalve species presently inhabiting the Eastern Atlantic and Mediterranean. This species is abundant in fossil benthic assemblages in Middle Miocene sediments of the Central Paratethys (Vienna and Danube Basins). Its indicator value for interpretation of past environmental conditions remains poorly explored and requires studies combining paleoecological, taphonomic, sclerochronological, and allometric approaches. First, meta-analysis of published abundance and body size patterns in living assemblages collected in the Adriatic Sea revealed that in spite of the westward increase in primary productivity in the northern Adriatic Sea, size structure of living assemblages of C. gibba during the 20th century does not differ between the northeastern (mesotrophic) and northwestern (eutrophic) coasts Adriatic Sea, with size-frequency distributions showing minimal differences in maximum shell size. Second, samples from cores from the northern Adriatic that span the past centuries to few millennia show that past populations of C. gibba inhabiting northeastern Adriatic had significantly smaller sizes than today, suggesting that the lack of size differences in the 20th century is a relatively young phenonemon triggered by recent eutrophication events. However, population densities are still significantly higher on the western side of the Adriatic Sea and in the Gulf of Trieste. Third, a broad-scale macroecological comparison of size-frequency distributions of molluscan assemblages with dominant C. gibba from the eastern Mediterranean (Israel) shows significantly smaller shells, relative to larger shells from the Adriatic Sea. This increase in shell size correlates positively with an increase in chlorophyll concentrations. We observed a size gradient of similar magnitude in Middle Miocene assemblages with C. gibba between the Vienna and Danube basins. Fossil C. gibba shells size from the northeastern margin of the Danube Basin

  14. C_14 Oxylipin glucosides isolated from Lemna paucicostata

    OpenAIRE

    Kai, Kenji; Akaike, Ryota; Iida, Kanae; Yokoyama, Mineyuki; Watanabe, Naoharu

    2010-01-01

    Oxylipin glucosides (2−4) were isolated from Lemna paucicostata, with their structuresand absolute configurations elucidated by spectroscopic and chemical methods.Compounds 2−4 were glucosides of C14-oxylipin which were synthesized fromα-linolenic acid via the 9-lipoxygenase pathway.

  15. C14-oxylipin glucosides isolated from Lemna paucicostata.

    Science.gov (United States)

    Kai, Kenji; Akaike, Ryota; Iida, Kanae; Yokoyama, Mineyuki; Watanabe, Naoharu

    2010-07-01

    Oxylipin glucosides (2-4) were isolated from Lemna paucicostata with their structures and absolute configurations elucidated by spectroscopic and chemical methods. Compounds 2-4 were glucosides of C14 oxylipin which were synthesized from alpha-linolenic acid via the 9-lipoxygenase pathway. 2010 Elsevier Ltd. All rights reserved.

  16. Remediation of eutrophic water using Lemna minor in a controlled ...

    African Journals Online (AJOL)

    The growth response of common duckweed Lemna minor was studied at various temperature and pH levels for its possible application for remediating eutrophic waters. The dry weight, chlorophyll a, nitrogen, phosphorus, potassium, peroxidase (POD), catalase (CAT) and malondialdehyde (MDA) levels were determined.

  17. A new taxon in the Infundibulicybe gibba complex (Basidiomycota, Agaricales, Tricholomataceae) from Sardinia (Italy).

    Science.gov (United States)

    Vizzini, Alfredo; Contu, Marco; Musumeci, Enzo; Ercole, Enrico

    2011-01-01

    A new species of Infundibulicybe (viz. I. mediterranea sp. nov.) is described from Sardinia based both on morphological and molecular ITS data. The species, a close ally of I. gibba, differs from the latter in the darker tinges of the basidiomata, the stipe, which is nearly concolorous with the pileus, and smaller basidiospores. Drawings of the main micro-morphological features as well as a color photograph of fresh basidiomata in situ are provided.

  18. Potential for chromium (VI) bioremediation by the aquatic carnivorous plant Utricularia gibba L. (Lentibulariaceae).

    Science.gov (United States)

    Augustynowicz, Joanna; Łukowicz, Krzysztof; Tokarz, Krzysztof; Płachno, Bartosz Jan

    2015-07-01

    The aquatic carnivorous plant Utricularia gibba has one of the smallest known genomes among flowering plants, and therefore, it is an excellent model organism for physiological and developmental studies. The main aim of our work was to check whether the ubiquitous U. gibba might be useful for the phytoremediation of the highly toxic and mobile hexavalent chromium in waters. Plants were incubated for 1 week in a 50 μM (2.6 mg dm(-3)) Cr(VI) solution in laboratory conditions. Our results revealed that the plant exhibits a very high accumulation capacity for Cr. The accumulation level was higher than 780 mg kg(-1) and a bioconcentration factor >300. On the other hand, the plants showed a low tolerance to the elevated Cr concentration, which was expressed in a significant decrease of the photosystem II activity. However, the most pronounced negative influence of chromate was found on the morphology and activity of the traps. Due to its high accumulation capacity, we suggest that U. gibba may be efficient in the removal of chromate over a short time scale. It can also provide a new molecular resource for studying the mechanisms of Cr(VI) detoxification.

  19. Effect of thermal pre-treatment on co-digestion of duckweed (Lemna gibba) and waste activated sludge on biogas production.

    Science.gov (United States)

    Gaur, Rubia Zahid; Khan, Abid Ali; Suthar, Surindra

    2017-05-01

    The duckweeds (DW) are considered as a major problem in tropical aquatic system as they grow very fast and produce enormous rich-biomass, which can be harvested for renewable energy operations. But complex lignocellulosic compounds limit their utility in process like anaerobic digestion. This batch study aimed to analyse characteristics (proximate, ultimate and physico-chemical) and possible utility of DW for anaerobic co-digestion with waste activated sludge (WAS) under mesophilic conditions for 35 d. Two sets of experiment were tested: substrate with and without thermal pre-treatment. Five combinations of DW: WAS (70:20, 60:20, 50:20, 40:20 and 30:20%) were established and biomethanation along with changes in pH, volatile solids (VS), volatile fatty acids (VFAs), and soluble chemical oxygen demand (sCOD) of digestate were recorded. The total CH 4 yield (mL CH 4 g -1 VS) ranged between 60 and 468 for pre-treated, and 9 and 76 for non-pre-treated. The maximum CH 4 yield was 468 mL CH 4 g -1 VS in DW: WAS (50:20). Thermally treated setups, showed about 13-, 24.1-, 21.1-, 1.4-, and 2.3-fold higher CH 4 than non-treated setups. The treated mixtures showed high reduction of S COD (>41-96) and VS (>59-98%) in co-digesters. The high degree of Gompertz curve fitting (R 2  > 0.99) has suggested pre-treatment of substrate for optimal outputs of co-digester. Based on results obtained, it is suggested that DW (50-60% in digester) can be used as renewable energy resource for biomethanation process after thermal pre-treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Prey composition in the carnivorous plants Utricularia inflata and U. gibba (Lentibulariaceae) from Paria Peninsula, Venezuela

    OpenAIRE

    Elizabeth Gordon; Sergio Pacheco

    2007-01-01

    Las plantas carnívoras acuáticas del género Utricularia (Lentibulariaceae), capturan pequeños organismos acuáticos, como rotíferos, copépodos, y cladóceros, por medio de estructuras anatómicas semejantes a vesículas. Este estudio tuvo como objetivo determinar el tamaño y tipo de presas de U. gibba y U. inflata, recolectados en un pequeño lago y en un pastizal inundado, respectivamente, en la localidad de la Península de Paria (Estado Sucre, Venezuela). La acidez, conductividad, cantidad de ox...

  1. Prey composition in the carnivorous plants Utricularia inflata and U. gibba (Lentibulariaceae) from Paria Peninsula, Venezuela.

    Science.gov (United States)

    Gordon, Elizabeth; Pacheco, Sergio

    2007-01-01

    Carnivorous aquatic plants, genus Utricularia (Lentibulariaceae), capture small aquatic organisms, such as rotifers, copepods, and cladocerans, by means of anatomical structures named bladders. The present study aimed to determine prey size and composition in U. gibba and U inflata, which were collected from a small lake and an herbaceous wetland, respectively, located in Paria Peninsula (Sucre State, Venezuela). Water pH, conductivity, dissolved oxygen, and salinity were measured in situ at each sampling location, and water samples were collected to determine N-Kjeldahl, total-P, Na+, K+, Ca++, Mg++, and Cl-. Fifty bladders from each plant species were measured and their contents were analyzed. N-Kjeldahl and total-P values were similar in both sites, and were also similar to values reported for eutrophic ecosystems, although Na+, K+, Ca++, Mg++ concentrations and in situ water parameter values were higher in the herbaceous wetland. Bladder content showed the following zooplankton groups: rotifers, cladocerans, copepods, annelids, rhizopodeans, and insects; and the following phytoplankton divisions: Bacillariophyta, Chlorophyta, Cyanophyta, and Euglenophyta. U. inflata presented smaller and fewer bladders, but higher abundance and total algal and animal morphospecies richness than U. gibba. Prey composition similarity at the taxon level between the two carnivorous species was low.

  2. Possible ecological risk of two pharmaceuticals diclofenac andparacetamol demonstrated on a model plant Lemna minor

    Czech Academy of Sciences Publication Activity Database

    Kummerová, M.; Zezulka, Š.; Babula, P.; Tříska, Jan

    2016-01-01

    Roč. 302, jan (2016), s. 351-361 ISSN 0304-3894 Institutional support: RVO:67179843 Keywords : Antioxidant mechanism * Diclofenac * Lemna minor * Oxidative stress * Paracetamol Subject RIV: EH - Ecology, Behaviour Impact factor: 6.065, year: 2016

  3. EKOGENOTOKSISITAS LIMBAH CAIR BATIK DAN EFEK ANTIMUTAGENIK Lemna minor TERHADAP ERITROSIT IKAN NILA (Oreochromis niloticus

    Directory of Open Access Journals (Sweden)

    Erma Musbita Tyastuti

    2016-09-01

    Full Text Available Limbah cair batik di Solo sebagian besar dibuang langsung ke perairan tanpa diolah terlebih dahulu dan menyebabkan pencemaran air. Kandungan logam berat di dalam limbah cair batik dapat memicu efek genotoksik seperti pembentukan mikronukleus. Lemna minor berpotensi sebagai antimutagen dan mencegah pembentukan mikronukleus karena mengandung senyawa aktif seperti karoten dan asam amino. Penelitian ini bertujuan untuk mengetahui ekogenotoksisitas limbah cair batik dan efek antimutagenik Lemna minor terhadap eritrosit ikan nila. Penelitian dilakukan di Laboratorium Biologi UMS dengan pemaparan limbah cair batik 0ppm/L, 2500 ppm/L, 5000 ppm/L dan 7500 ppm/L terhadap 2 kelompok ikan nila dengan diet pelet dan Lemna minor. Hasil penelitian menunjukkan bahwa paparan limbah cair batik memicu pembentukan mikronukleus dengan frekwensi tertinggi pada konsentrasi paparan 7500 ppm/L. Lemna minor juga terbukti memiliki potensi antimutagenik karena mampu menekan frekwensi mikronukleus lebih rendah dibandingkan diet pelet.

  4. Prey composition in the carnivorous plants Utricularia inflata and U. gibba (Lentibulariaceae from Paria Peninsula, Venezuela

    Directory of Open Access Journals (Sweden)

    Elizabeth Gordon

    2007-12-01

    Full Text Available Las plantas carnívoras acuáticas del género Utricularia (Lentibulariaceae, capturan pequeños organismos acuáticos, como rotíferos, copépodos, y cladóceros, por medio de estructuras anatómicas semejantes a vesículas. Este estudio tuvo como objetivo determinar el tamaño y tipo de presas de U. gibba y U. inflata, recolectados en un pequeño lago y en un pastizal inundado, respectivamente, en la localidad de la Península de Paria (Estado Sucre, Venezuela. La acidez, conductividad, cantidad de oxígeno disuelto y la salinidad del agua se midieron in situ para cada sitio de muestreo; también se tomaron muestras de agua para determinar niveles de N-Kjeldahl, P-total, Na+, K+, Ca++, Mg++ y Cl-. Se midieron cincuenta vesículas de cada especie y se analizaron sus contenidos. Los valores de N-Kjeldahl y P-total fueron similares en ambos sitios, y semejantes a los conocidos para ecosistemas eutróficos; sin embargo, las concentraciones de Na+, K+, Ca++, Mg++ y los valores in situ de los parámetros del agua fueron más altos en el pastizal inundado. Las vesículas contenían los siguientes grupos de zooplancton: rotíferos, cladóceros, copépodos, anélidos, rizópodos, e insectos; y las siguientes divisiones de fitoplancton: Bacillariophyta, Chlorophyta, Cyanophyta y Euglenophyta. Las vesículas presentadas por U. inflata fueron menores en tamaño y en cantidad, pero mayores en abundancia y riqueza total de morfoespecies algales y animales en comparación con U. gibba. La similitud en cuanto a composición de presas a nivel taxonómico, entre las dos especies de plantas carnívoras, fue baja.

  5. The cyanobacterial endosymbiont of the unicellular algae Rhopalodia gibba shows reductive genome evolution

    Directory of Open Access Journals (Sweden)

    Lockhart Peter J

    2008-01-01

    Full Text Available Abstract Background Bacteria occur in facultative association and intracellular symbiosis with a diversity of eukaryotic hosts. Recently, we have helped to characterise an intracellular nitrogen fixing bacterium, the so-called spheroid body, located within the diatom Rhopalodia gibba. Spheroid bodies are of cyanobacterial origin and exhibit features that suggest physiological adaptation to their intracellular life style. To investigate the genome modifications that have accompanied the process of endosymbiosis, here we compare gene structure, content and organisation in spheroid body and cyanobacterial genomes. Results Comparison of the spheroid body's genome sequence with corresponding regions of near free-living relatives indicates that multiple modifications have occurred in the endosymbiont's genome. These include localised changes that have led to elimination of some genes. This gene loss has been accompanied either by deletion of the respective DNA region or replacement with non-coding DNA that is AT rich in composition. In addition, genome modifications have led to the fusion and truncation of genes. We also report that in the spheroid body's genome there is an accumulation of deleterious mutations in genes for cell wall biosynthesis and processes controlled by transposases. Interestingly, the formation of pseudogenes in the spheroid body has occurred in the presence of intact, and presumably functional, recA and recF genes. This is in contrast to the situation in most investigated obligate intracellular bacterium-eukaryote symbioses, where at least either recA or recF has been eliminated. Conclusion Our analyses suggest highly specific targeting/loss of individual genes during the process of genome reduction and establishment of a cyanobacterial endosymbiont inside a eukaryotic cell. Our findings confirm, at the genome level, earlier speculation on the obligate intracellular status of the spheroid body in Rhopalodia gibba. This

  6. EVALUACIÓN DE LA PLANTA Lemna minor COMO BIORREMEDIADORA DE AGUAS CONTAMINADAS CON MERCURIO

    Directory of Open Access Journals (Sweden)

    Adolfo D. Arenas

    2011-01-01

    Full Text Available Se evaluó la capacidad biorremediadora de Lemna minor en función del tiempo en aguas contaminadas con mercurio mediante un diseño experimental de 3 bloques al azar con cinco réplicas: un grupo experimental con 100 g de Lemna, 7,5 L de agua contaminada con Hg (0,13 mgL-1 y solución nutritiva; un grupo Testigo con 100 g de Lemna, 7,5 L de agua y solución nutritiva y un grupo control con mercurio al nivel de 0,13 mgL-1 en agua destilada sin plantas. La eficiencia de remoción de mercurio de la Lemna minor, en 22 días, fue de 30%. Las variables peso fresco, peso seco, y nitrógeno y fósforo foliares no presentaron diferencias significativas entre los dos tratamientos. La absorción de potasio, fue afectada por los niveles de mercurio. La planta Lemna minor representa una alternativa para la remoción de mercurio en aguas contaminadas hasta un nivel de 0,13 mg/L.

  7. Hydroxycinnamoylmalated flavone C-glycosides from Lemna japonica.

    Science.gov (United States)

    Bai, Huan-Huan; Wang, Ni-Ni; Mi, Jiao; Yang, Tao; Fang, Dong-Mei; Wu, Lin-Wei; Zhao, Hai; Li, Guo-You

    2018-01-01

    Three previously undescribed flavone C-glycosides (1-3), along with seven known ones (4-10), were isolated and characterized from the smallest flowering aquatic plant, Lemna japonica. On the basis of spectroscopic analysis and alkaline hydrolysis, compounds 1-3 were identified to be luteolin 6-C-(2″-O-trans-caffeoyl-d-malate)-β-glucoside (1), apigenin 6-C-(2″-O-trans-caffeoyl-d-malate)-β-glucoside (2), and luteolin 6-C-(2″-O-trans-coumaroyl-d-malate)-β-glucoside (3). Compounds 1-3 are characteristic of a trans-coumaroyl-d-malate or trans-caffeoyl-d-malate linked to C-2″ of the glucose, which was reported for the first time. Compounds 1-3 exhibited weak cytotoxicity against HepG-2, SW-620, and A-549 cell lines, with IC 50 values between 42.5 and 19.2μg/ml, and moderate antioxidant activity. Meanwhile compound 3 displayed moderate nematocidal activity with an EC 50 value of 1.56mg/ml. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Toxicological evaluation of bacterial decolourised anaerobically treated distillery effluent with common duckweed (Lemna minor).

    Science.gov (United States)

    Chandra, Ram; Srivastava, Archana

    2004-01-01

    Duckweed (Lemna minor) a small vascular plant, grows rapidly, is sensitive to a wide variety of toxicants and is easy to culture. A method is described that measures duckweed frond growth, chlorophyll, protein and biomass content as indicator of growth inhibition. The physico-chemical analysis of anaerobically treated distillery effluent revealed high BOD (28,000 mg/l), COD (52,400 mg/l) and dark brown colour (180,000 Co. Pt.). This effluent showed high toxicity to Lemna minor after 96 h of exposure in laboratory condition. EC50 of the fronds for chlorophyll, protein and biomass was found to be 25%, however, the bacterial decolourised effluent showed reduction of BOD (87.50%), COD (84.50%) and colour (76%). Further the toxicity evaluation with Lemna minor showed toxicity reduction up to 63% for all tested parameters. The EC50 noted for chlorophyll, protein and biomass was 100% concentration of decolourised effluent.

  9. Caracterización molecular por patrones electroforéticos de isoenzimas esterasas en Lemna aequinoctialis y Lemna valdiviana (lemnaceae de Costa Rica (ING

    Directory of Open Access Journals (Sweden)

    Sharon Jiménez Delgado

    2016-03-01

    Full Text Available The Lemnaceae family lacks morphologic and anatomical characteristics with comparative aims and for that reason the molecular studies has been necessary a differentiation. In Costa Rica there are two species of Lemna: Lemna aequinoctialis and Lemna valdiviana. With the objective of a molecular characterization and differentiation of both species were extracted isoenzymes esterases. The study was carried out in the Molecular Genetics Laboratory of the School of Biological Sciences at Universidad Nacional, Heredia, Costa Rica. The technical electrophoresis in gel of polyacrylamida SDS-PAGE was used. It was difference in the pattern of isoenzymes between both species. According to previous molecular studies based on morphology and anatomy, flavonoides, isoenzymes, and DNA sequences of certain genes both species are very different; in addition they belong to different monophyletics groups. On the other hand, the importance of this molecular characterization is its possible use in water treatment, because the esterases have had important in the bioremediation. Also, species of the Lemnaceae family are used in the water treatment like bioremediation.

  10. GROWTH RESPONSE OF THE DUCKWEED LEMNA MINOR TO HEAVY METAL POLLUTION

    Directory of Open Access Journals (Sweden)

    N. Khellaf ، M. Zerdaoui

    2009-07-01

    Full Text Available To assess the tolerance and effect of heavy metals pollution on the duckweed Lemna minor, the aquatic plants were exposed to different concentrations of copper (Cu, nickel (Ni, cadmium (Cd and zinc (Zn in a quarter Coïc and Lessaint solution at pH = 6.1 (± 0.1 and under a daily regime of 16 h light (101 μmol/m2.s1. Copper at 0.2 mg/L and nickel at 0.5 mg/L promoted the growth of Lemna fronds. At higher concentrations, Cu and Ni inhibited the growth of duckweed; the EC50 (concentration causing 50% inhibition were 0.47 mg/L for Cu and 1.29 mg/L for Ni. Cadmium and zinc decreased by 50% the growth of fronds when the medium contained respectively 0.64 and 5.64 mg/L (EC50. Duckweed tolerated Cu, Ni, Cd and Zn at concentrations of 0.4, 3.0, 0.4 and 15.0 mg/L respectively without showing any visible signs of toxicity (chlorosis, frond disconnection and necrosis. On the basis of visible symptoms and the EC50 values, the toxicity of the metals on Lemna. minor was in decreasing order of damage: Cu > Cd > Ni > Zn. It was concluded that the duckweed Lemna. minor is very sensitive to copper and cadmium pollution.

  11. Effects of light and phytochrome in heterotrophic growth of Lemna minor L.

    NARCIS (Netherlands)

    Rombach, J.

    1976-01-01

    Axenic cultures of Lemna minor L. were grown on a medium containing sugars and amino acids. In continuous darkness the growth rate was one-tenth of the maximum in continuous light. In darkness early death revealed a thiamine deficiency; this

  12. Trophic transfer of cadmium from duckweed (Lemna Minor L.) to Tilapia (Oreochromis mossambicus)

    NARCIS (Netherlands)

    Xue, Yan; Peijnenburg, Willie J G M; Huang, Jin; Wang, Dengjun; Jin, Yan

    2018-01-01

    The transfer of the toxic heavy metal Cd from duckweed (Lemna minor L.) to the freshwater fish tilapia (Oreochromis mossambicus) was investigated. Concentrations of Cd in different chemical forms in duckweed and in different tissues (gut, edible muscle, and remnants) of tilapia, i.e.,

  13. Removal mechanisms of benzotriazoles in duckweed Lemna minor wastewater treatment systems.

    Science.gov (United States)

    Gatidou, Georgia; Oursouzidou, Maria; Stefanatou, Aimilia; Stasinakis, Athanasios S

    2017-10-15

    The fate of five benzotriazoles (1H-benzotriazole, BTR; 4-methyl-1H-benzotriazole, 4TTR; 5-methyl-1H-benzotriazole, 5TTR; xylytriazole, XTR and 5-chlorobenzotriazole, CBTR) was studied in batch and continuous-flow Lemna minor systems and the role of different mechanisms on their removal was evaluated. Single and joint toxicity experiments were initially conducted using the Organization for Economic Co-operation and Development (OECD) protocol 221 and no inhibition on specific growth rate of Lemna minor was observed for concentrations up to 200μgL -1 . All tested substances were significantly removed in batch experiments with Lemna minor. Excepting 4TTR, full elimination of CBTR, XTR, 5TTR and BTR was observed up to the end of these experiments (36d), while the half-life values ranged between 1.6±0.3d (CBTR) and 25±3.6d (4-TTR). Calculation of kinetic constants for hydrolysis, photodegradation, and plant uptake revealed that for all BTRs the kinetic constants of plant uptake were by far higher comparing to those of the other mechanisms, reaching 0.394±0.161d -1 for CBTR. The operation of a continuous-flow Lemna minor system consisted of three mini ponds and a total hydraulic residence time of 8.3d showed sufficient removal for most target substances, ranging between 26% (4TTR) and 72% (CBTR). Application of a model for describing micropollutants removal in the examined system showed that plant uptake was the major mechanism governing BTRs removal in Lemna minor systems. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Rhizobium paknamense sp. nov., isolated from lesser duckweeds (Lemna aequinoctialis).

    Science.gov (United States)

    Kittiwongwattana, Chokchai; Thawai, Chitti

    2013-10-01

    A Gram-stain-negative, rod-shaped bacterium was isolated and designated strain L6-8(T) during a study of endophytic bacterial communities in lesser duckweed (Lemna aequinoctialis). Cells of strain L6-8(T) were motile with peritrichous flagella. The analysis of the nearly complete 16S rRNA gene sequence indicated that strain L6-8(T) was phylogenetically related to species of the genus Rhizobium. Its closest relatives were Rhizobium borbori DN316(T) (97.6 %), Rhizobium oryzae Alt 505(T) (97.3 %) and Rhizobium pseudoryzae J3-A127(T) (97.0 %). The sequence similarity analysis of housekeeping genes recA, glnII, atpD and gyrB showed low levels of sequence similarity (Rhizobium with validly published names. The pH range for growth was 4.0-9.0 (optimum 6.0-7.0), and the temperature range for growth was 20-45 °C (optimum 30 °C). Strain L6-8(T) tolerated NaCl up to 2 % (w/v) (optimum 1 % NaCl). The predominant components of cellular fatty acids were C19 : 0 cyclo ω8c (31.32 %), summed feature 8 (C18 : 1ω7c and/or C18 : 1ω6c; 25.39 %) and C16 : 0 (12.03 %). The DNA G+C content of strain L6-8(T) was 60.4 mol% (Tm). nodC and nifH were not amplified in strain L6-8(T). DNA-DNA relatedness between strain L6-8(T) and R. borbori DN316(T), R. oryzae Alt505(T) and R. pseudoryzae J3-A127(T) was between 11.2 and 18.3 %. Based on the sequence similarity analyses, phenotypic, biochemical and physiological characteristics and DNA-DNA hybridization, strain L6-8(T) could be readily distinguished from its closest relatives and represents a novel species of the genus Rhizobium, for which the name Rhizobium paknamense sp. nov. is proposed. The type strain is L6-8(T) ( = NBRC 109338(T) = BCC 55142(T)).

  15. Effects of CuO nanoparticles on Lemna minor.

    Science.gov (United States)

    Song, Guanling; Hou, Wenhua; Gao, Yuan; Wang, Yan; Lin, Lin; Zhang, Zhiwei; Niu, Qiang; Ma, Rulin; Mu, Lati; Wang, Haixia

    2016-12-01

    Copper dioxide nanoparticles (NPs), which is a kind of important and widely used metal oxide NP, eventually reaches a water body through wastewater and urban runoff. Ecotoxicological studies of this kind of NPs effects on hydrophyte are very limited at present. Lemna minor was exposed to media with different concentrations of CuO NPs, bulk CuO, and two times concentration of Cu 2+ released from CuO NPs in culture media. The changes in plant growth, chlorophyll content, antioxidant defense enzyme activities [i.e., peroxidase (POD), catalase (CAT), superoxide dismutase (SOD) activities], and malondialdehyde (MDA) content were measured in the present study. The particle size of CuO NPs and the zeta potential of CuO NPs and bulk CuO in the culture media were also analyzed to complementally evaluate their toxicity on duckweed. Results showed that CuO NPs inhibited the plant growth at lower concentration than bulk CuO. L. minor roots were easily broken in CuO NPs media under the experimental condition, and the inhibition occurred only partly because CuO NPs released Cu 2+ in the culture media. The POD, SOD, and CAT activities of L. minor increased when the plants were exposed to CuO NPs, bulk CuO NPs and two times the concentration of Cu 2+ released from CuO NPs in culture media, but the increase of these enzymes were the highest in CuO NPs media among the three kinds of materials. The MDA content was significantly increased compared with that of the control from 50 mg L -1 CuO NP concentration in culture media. CuO NPs has more toxicity on L. minor compared with that of bulk CuO, and the inhibition occurred only partly because released Cu 2+ in the culture media. The plant accumulated more reactive oxygen species in the CuO NP media than in the same concentration of bulk CuO. The plant cell encountered serious damage when the CuO NP concentration reached 50 mg L -1 in culture media. The toxicology of CuO NP on hydrophytes must be considered because that hydrophytes

  16. The enzymatic and antioxidative stress response of Lemna minor to copper and a chloroacetamide herbicide.

    Science.gov (United States)

    Obermeier, Michael; Schröder, Christian A; Helmreich, Brigitte; Schröder, Peter

    2015-12-01

    Lemna minor L., a widely used model plant for toxicity tests has raised interest for its application to phytoremediation due to its rapid growth and ubiquitous occurrence. In rural areas, the pollution of water bodies with heavy metals and agrochemicals poses a problem to surface water quality. Among problematic compounds, heavy metals (copper) and pesticides are frequently found in water bodies. To establish duckweed as a potential plant for phytoremediation, enzymatic and antioxidative stress responses of Lemna minor during exposure to copper and a chloroacetamide herbicide were investigated in laboratory studies. The present study aimed at evaluating growth and the antioxidative and glutathione-dependent enzyme activity of Lemna plants and its performance in a scenario for phytoremediation of copper and a chloroacetamide herbicide. Lemna minor was grown in Steinberg medium under controlled conditions. Plants were treated with CuSO4 (ion conc. 50 and 100 μg/L) and pethoxamide (1.25 and 2.5 μg/L). Measurements following published methods focused on plant growth, oxidative stress, and basic detoxification enzymes. Duckweed proved to survive treatment with the respective concentrations of both pollutants very well. Its growth was inhibited scarcely, and no visible symptoms occurred. On the cellular basis, accumulation of O2(-) and H2O2 were detected, as well as stress reactions of antioxidative enzymes. Duckweed detoxification potential for organic pollutants was high and increased significantly with incubation. Pethoxamide was found to be conjugated with glutathione. Copper was accumulated in the fronds at high levels, and transient oxidative defense reactions were triggered. This work confirms the significance of L. minor for the removal of copper from water and the conjugation of the selective herbicide pethoxamide. Both organic and inorganic xenobiotics induced different trends of enzymatic and antioxidative stress response. The strong increase of stress

  17. Comparative sensitivity of Selenastrum capricornutum and Lemna minor to sixteen herbicides

    Science.gov (United States)

    Fairchild, J.F.; Ruessler, D.S.; Haverland, P.S.; Carlson, A.R.

    1997-01-01

    Aquatic plant toxicity tests are frequently conducted in environmental risk assessments to determine the potential impacts of contaminants on primary producers. An examination of published plant toxicity data demonstrates that wide differences in sensitivity can occur across phylogenetic groups of plants. Yet relatively few studies have been conducted with the specific intent to compare the relative sensitivity of various aquatic plant species to contaminants. We compared the relative sensitivity of the algae Selenestrum capricornutum and the floating vascular plant Lemna minor to 16 herbicides (atrazine, metribuzin, simazine, cyanazine, alachlor, metolachlor, chlorsulfuron, metsulfuron, triallate, EPTC, trifluralin, diquat, paraquat, dicamba, bromoxynil, and 2,4-D). The herbicides studied represented nine chemical classes and several modes of action and were chosen to represent major current uses in the United States. Both plant species were generally sensitive to the triazines (atrazine, metribuzin, simazine, and cyanazine), sulfonureas (metsulfuron and chlorsulfuron), pyridines (diquat and paraquat), dinitroaniline (trifluralin), and acetanilide (alachlor and metolachlor) herbicides. Neither plant species was uniformly more sensitive than the other across the broad range of herbicides tested. Lemna was more sensitive to the sulfonureas (metsulfuron and chlorsulfuron) and the pyridines (diquat and parequat) than Selenastrum. However Selenastrum was more sensitive than Lemna to one of two thiocarbamates (triallate) and one of the triazines (cyanazine). Neither species was sensitive to selective broadleaf herbicides including bromoxynil, EPTC, dicamba, or 2,4-D. Results were not always predictable in spite of obvious differences in herbicide modes of action and plant phylogeny. Major departures in sensitivity of Selenastrum occurred between chemicals within individual classes of the triazine, acetanilide, and thiocarbamate herbicides. Results indicate that neither

  18. LA LENTEJA DE AGUA (LEMNA MINOR L.: UNA PLANTA ACUÁTICA PROMISORIA*

    Directory of Open Access Journals (Sweden)

    María del Pilar Arroyave

    Full Text Available Se describen las principales características morfológicas y ecológicas de la planta acuática Lemna minor L., al igual que la utilización que tiene como complemento alimenticio para animales domésticos y en labores de fitorremediación, por su capacidad de absorber nutrientes y contaminantes de los ecosistemas acuáticos. Asimismo se discute su potencial como una especie adecuada para realizar ensayos de fitotoxicidad.

  19. Ecotoxicological assessments show sucralose and fluoxetine affect the aquatic plant, Lemna minor

    International Nuclear Information System (INIS)

    Amy-Sagers, Cherisse; Reinhardt, Keith; Larson, Danelle M.

    2017-01-01

    Highlights: • Sucralose increased leaf area and photosynthetic capacity of Lemna minor. • Sucralose increased δ 13 C of Lemna, indicating substantial uptake and assimilation. • 100 μg/L-fluoxetine decreased Lemna minor growth and asexual reproduction. - Abstract: Pharmaceuticals and personal care products (PPCP) are prevalent in aquatic systems, yet the fate and impacts on aquatic plants needs quantification for many compounds. We measured and detected sucralose (an artificial sweetener), fluoxetine (an antidepressant), and other PPCP in the Portneuf River in Idaho, USA, where Lemna minor (an aquatic plant in the environment and used in ecotoxicology studies) naturally occurs. Sucralose was hypothesized to negatively affect photosynthesis and growth of L. minor because sucralose is a chlorinated molecule that may be toxic or unusable for plant metabolism. A priori hypotheses were not created for fluoxetine due to lack of previous studies examining its impacts on plants. We conducted laboratory ecotoxicological assessments for a large range of concentrations of sucralose and fluoxetine on L. minor physiology and photosynthetic function. Frond green leaf area, root length, growth rate, photosynthetic capacity, and plant carbon isotopic composition (discrimination relative to a standard; δ 13 C) were measured among treatments ranging from 0 to 15000 nmol/L-sucralose and 0–323 nmol/L-fluoxetine. Contrary to our predictions, sucralose significantly increased green leaf area, photosynthetic capacity, and δ 13 C of L. minor at environmentally relevant concentrations. The increase of δ 13 C from sucralose amendments and an isotope-mixing model indicated substantial sucralose uptake and assimilation within the plant. Unlike humans who cannot break down and utilize sucralose, we documented that L. minor—a mixotrophic plant—can use sucralose as a sugar substitute to increase its green leaf area and photosynthetic capacity. Fluoxetine significantly decreased L

  20. Ecotoxicological assessments show sucralose and fluoxetine affect the aquatic plant, Lemna minor

    Energy Technology Data Exchange (ETDEWEB)

    Amy-Sagers, Cherisse; Reinhardt, Keith; Larson, Danelle M., E-mail: danellelarson77@gmail.com

    2017-04-15

    Highlights: • Sucralose increased leaf area and photosynthetic capacity of Lemna minor. • Sucralose increased δ {sup 13}C of Lemna, indicating substantial uptake and assimilation. • 100 μg/L-fluoxetine decreased Lemna minor growth and asexual reproduction. - Abstract: Pharmaceuticals and personal care products (PPCP) are prevalent in aquatic systems, yet the fate and impacts on aquatic plants needs quantification for many compounds. We measured and detected sucralose (an artificial sweetener), fluoxetine (an antidepressant), and other PPCP in the Portneuf River in Idaho, USA, where Lemna minor (an aquatic plant in the environment and used in ecotoxicology studies) naturally occurs. Sucralose was hypothesized to negatively affect photosynthesis and growth of L. minor because sucralose is a chlorinated molecule that may be toxic or unusable for plant metabolism. A priori hypotheses were not created for fluoxetine due to lack of previous studies examining its impacts on plants. We conducted laboratory ecotoxicological assessments for a large range of concentrations of sucralose and fluoxetine on L. minor physiology and photosynthetic function. Frond green leaf area, root length, growth rate, photosynthetic capacity, and plant carbon isotopic composition (discrimination relative to a standard; δ{sup 13}C) were measured among treatments ranging from 0 to 15000 nmol/L-sucralose and 0–323 nmol/L-fluoxetine. Contrary to our predictions, sucralose significantly increased green leaf area, photosynthetic capacity, and δ {sup 13}C of L. minor at environmentally relevant concentrations. The increase of δ {sup 13}C from sucralose amendments and an isotope-mixing model indicated substantial sucralose uptake and assimilation within the plant. Unlike humans who cannot break down and utilize sucralose, we documented that L. minor—a mixotrophic plant—can use sucralose as a sugar substitute to increase its green leaf area and photosynthetic capacity. Fluoxetine

  1. Diversidade e estrutura da comunidade bacteriana associada às armadilhas da planta carnívora Utricularia gibba (Lentibulariaceae) e ao ambiente aquático.

    OpenAIRE

    Almir José Ferreira

    2011-01-01

    A diversidade microbiana em ambientes aquáticos e sua associação com plantas carnívoras ainda é pouco estudada. Assim, a comunidade bacteriana da planta carnívora Utricularia gibba e do seu meio aquático foi avaliada por meio do seqüenciamento em larga escala (454 Roche) de uma biblioteca do gene 16S rRNA. Os resultados indicaram que a comunidade bacteriana na água é significativamente diferente da comunidade dos utrículos. Além disso, a comunidade bacteriana da água é composta principalmente...

  2. Wastewater pollution remediation: an experimental investigation with aquatic macrophyte Lemna minor.

    Science.gov (United States)

    Kuraishi, M A; Sharma, Sunil

    2011-04-01

    The freshwater resources are shrinking rapidly due to rise in population and discharge of untreated wastewater into fresh water bodies making them unfit for public use in many developing countries. Effective and affordable wastewater treatment has become a challenge, hence various alternatives are being investigated by researchers to tackle the problem. In this study, laboratory scale experiments on duckweed covered domestic sewage were carried out to evaluate the removal efficiency of duckweed species Lemna minor as a domestic wastewater stripper. The outdoor experiments were conducted in 4 mini ponds at Jodhpur, popularly known as Sun City of India. The physico-chemical properties of domestic wastewater were evaluated before and after inoculation of culture for wastewater quality improvement. Various parameters, namely pH, DO, TSS, TDS, Turbidity, BOD, COD, Total Nitrogen and Total Phosphorus were analysed for varying detention periods. The result indicated that the treated effluent can be used for irrigation.

  3. Temperature-dependent toxicity of artemisinin toward the macrophyte Lemna minor and the algae Pseudokirchneriella subcapitata

    DEFF Research Database (Denmark)

    Jessing, Karina Knudsmark; Andresen, Marianne; Cedergreen, Nina

    2014-01-01

    - and groundwater. To make better risk assessments of A. annua which is cultivated under varying climatic conditions, the temperature-dependent toxicity of artemisinin toward the green algae Pseudokirchneriella subcapitata and the macrophyte Lemna minor was evaluated at temperatures ranging from 10 to 30°C....... To include a possible effect of temperature on the degradation rate of artemisinin, artemisinin concentrations were measured during the experiment and toxicity was related to the time-weighted averages of exposure concentrations. The toxicity of artemisinin toward the macrophyte L. minor and the algae P......Artemisinin, an antimalarial compound derivated from the cultivated plant Artemisia annua L., is produced in situ through cultivation of A. annua under different climatic conditions. The bioactive compound artemisinin has been observed to spread to the surroundings as well as to leach to surface...

  4. Biodiesel production from Jatropha curcas L. oil using Lemna perpusilla Torrey ash as heterogeneous catalyst

    International Nuclear Information System (INIS)

    Chouhan, Ashish Pratap Singh; Sarma, Anil Kumar

    2013-01-01

    Refined Jatropha curcas L. oil (JCO) and methanol were used as the reactants for the transesterification reactions in a Radleys reactor in the presence of a heterogeneous ash catalyst derived from the waste aquatic plant Lemna perpusilla Torrey. Physical characterization of the catalyst showed partly crystalline behaviour and a moderate surface area 9.622 m 2 g −1 . The L. perpusilla Torrey ashes obtained from traditional combustion method were further calcined at 550 ± 5 °C before use. In addition to other non-metal and metallic constitutes the ash contains 11.3% potassium which attributed to its catalytic behaviour. The cumulative mass fraction of 89.43% of the oil was converted to biodiesel at 65 ± 5 °C in 5 h at 1:9 M ratio of oil to alcohol with 5% of the ash as catalyst. The biodiesel (FAME) so obtained were characterized using appropriate ASTM methods and found within the defined standard limits. The catalyst could be reused upto 3-times but there is a reduction of efficacy by about 25% for 3rd consecutive batch reaction. The activation energy was calculated for FAME and found to be 29.49 kJ mol −1 . -- Highlights: ► Lemna perpusilla Torrey ash is a potential heterogeneous catalyst. ► The catalyst has moderately good surface area and pores. ► The ash contain 11.3% potassium which is attributed to its catalytic behaviour. ► 89.43% of the refined Jatropha curcas oil could be converted to FAME in a Radleys reactor. ► The activation energy for FAME was calculated and found to be 29.49 kJ mol −1

  5. Sustainable biodegradation of phenol by Acinetobacter calcoaceticus P23 isolated from the rhizosphere of duckweed Lemna aoukikusa.

    Science.gov (United States)

    Yamaga, Fumiko; Washio, Kenji; Morikawa, Masaaki

    2010-08-15

    Phenol-degrading bacteria were isolated from the rhizosphere of duckweed (Lemna aoukikusa) using an enrichment culture method. One of the isolates, P23, exhibited an excellent ability to degrade phenol and attach to a solid surface under laboratory conditions. Phylogenetic analysis revealed that P23 belongs to the genera Acinetobacter and has the highest similarity to Acinetobacter calcoaceticus. P23 rapidly colonized on the surface of sterilized duckweed roots and formed biofilms, indicating that the conditions provided by the root system of duckweed are favorable to P23. A long-term performance test (160 h) showed that continuous removal of phenol can be attributed to the beneficial symbiotic interaction between duckweed and P23. P23 is the first growth-promoting bacterium identified from Lemna aoukikusa. The results in this study suggest the potential usefulness of dominating a particular bacterium in the rhizosphere of duckweeds to achieve efficient and sustainable bioremediation of polluted water.

  6. A Nanopore-Structured Nitrogen-Doped Biocarbon Electrocatalyst for Oxygen Reduction from Two-Step Carbonization of Lemna minor Biomass

    Science.gov (United States)

    Guo, Chaozhong; Li, Zhongbin; Niu, Lidan; Liao, Wenli; Sun, Lingtao; Wen, Bixia; Nie, Yunqing; Cheng, Jing; Chen, Changguo

    2016-05-01

    So far, the development of highly active and stable carbon-based electrocatalysts for oxygen reduction reaction (ORR) to replace commercial Pt/C catalyst is a hot topic. In this study, a new nanoporous nitrogen-doped carbon material was facilely designed by two-step pyrolysis of the renewable Lemna minor enriched in crude protein under a nitrogen atmosphere. Electrochemical measurements show that the onset potential for ORR on this carbon material is around 0.93 V (versus reversible hydrogen electrode), slightly lower than that on the Pt/C catalyst, but its cycling stability is higher compared to the Pt/C catalyst in an alkaline medium. Besides, the ORR at this catalyst approaches to a four-electron transfer pathway. The obtained ORR performance can be basically attributed to the formation of high contents of pyridinic and graphitic nitrogen atoms inside this catalyst. Thus, this work opens up the path in the ORR catalysis for the design of nitrogen-doped carbon materials utilizing aquatic plants as starting precursors.

  7. Effects of coronatine elicitation on growth and metabolic profiles of Lemna paucicostata culture.

    Directory of Open Access Journals (Sweden)

    Jin-Young Kim

    Full Text Available In this study, the effects of coronatine treatment on the growth, comprehensive metabolic profiles, and productivity of bioactive compounds, including phenolics and phytosterols, in whole plant cultures of Lemna paucicostata were investigated using gas chromatography-mass spectrometry (GC-MS coupled with multivariate statistical analysis. To determine the optimal timing of coronatine elicitation, coronatine was added on days 0, 23, and 28 after inoculation. The total growth of L. paucicostata was not significantly different between the coronatine treated groups and the control. The coronatine treatment in L. paucicostata induced increases in the content of hydroxycinnamic acids, such as caffeic acid, isoferulic acid, ρ-coumaric acid, sinapic acid, and phytosterols, such as campesterol and β-sitosterol. The productivity of these useful metabolites was highest when coronatine was added on day 0 and harvested on day 32. These results suggest that coronatine treatment on day 0 activates the phenolic and phytosterol biosynthetic pathways in L. paucicostata to a greater extent than in the control. To the best of our knowledge, this is the first report to investigate the effects of coronatine on the alteration of metabolism in L. paucicostata based on GC-MS profiling. The results of this research provide a foundation for designing strategies for enhanced production of useful metabolites for pharmaceutical and nutraceutical industries by cultivation of L. paucicostata.

  8. Differential oxidative and antioxidative response of duckweed Lemna minor toward plant growth promoting/inhibiting bacteria.

    Science.gov (United States)

    Ishizawa, Hidehiro; Kuroda, Masashi; Morikawa, Masaaki; Ike, Michihiko

    2017-09-01

    Bacteria colonizing the plant rhizosphere are believed to positively or negatively affect the host plant productivity. This feature has inspired researchers to engineer such interactions to enhance crop production. However, it remains to be elucidated whether rhizobacteria influences plant oxidative stress vis-a-vis other environmental stressors, and whether such influence is associated with their growth promoting/inhibiting ability. In this study, two plant growth-promoting bacteria (PGPB) and two plant growth-inhibiting bacteria (PGIB) were separately inoculated into axenic duckweed (Lemna minor) culture under laboratory conditions for 4 and 8 days in order to investigate their effects on plant oxidative stress and antioxidant activities. As previously characterized, the inoculation of PGPB and PGIB strains accelerated and reduced the growth of L. minor, respectively. After 4 and 8 days of cultivation, compared to the PGPB strains, the PGIB strains induced larger amounts of O 2 •- , H 2 O 2 , and malondialdehyde (MDA) in duckweed, although all bacterial strains consistently increased O 2 •- content by two times more than that in the aseptic control plants. Activities of five antioxidant enzymes were also elevated by the inoculation of PGIB, confirming the severe oxidative stress condition in plants. These results suggest that the surface attached bacteria affect differently on host oxidative stress and its response, which degree correlates negatively to their effects on plant growth. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  9. Possible ecological risk of two pharmaceuticals diclofenac and paracetamol demonstrated on a model plant Lemna minor.

    Science.gov (United States)

    Kummerová, Marie; Zezulka, Štěpán; Babula, Petr; Tříska, Jan

    2016-01-25

    Lemna minor is often used in environmental risk assessment and it can be supposed that usually evaluated parameters will be reliable even for assessing the risk of pharmaceuticals. Subtle changes in duckweed plant number, biomass production, and leaf area size induced by 10-day-exposure to diclofenac (DCF) and paracetamol (PCT) (0.1, 10, and 100 μg/L), excepting 100 μg/L DCF, are in contrast with considerable changes on biochemical and histochemical level. Both drugs caused a decrease in content of photosynthetic pigments (by up to 50%), an increase in non-photochemical quenching (by 65%) and decrease in relative chlorophyll fluorescence decay values (by up to 90% with DCF). Both DCF and especially PCT increased amount of reactive nitrogen and oxygen species in roots. DCF-induced effects included mainly increased lipid peroxidation (by 78%), disturbation in membrane integrity and lowering both oxidoreductase and dehydrogenase activities (by 30%). PCT increased the content of soluble proteins and phenolics. Higher concentrations of both DCF and PCT increased the levels of oxidised ascorbate (by 30%) and oxidised thiols (by up to 84% with DCF). Glutathion-reductase activity was elevated by both pharmaceuticals (nearly by 90%), glutathion-S-transferase activity increased mainly with PCT (by 22%). The early and sensitive indicators of DCF and PCT phytotoxicity stress in duckweed are mainly the changes in biochemical processes, connected with activation of defense mechanisms against oxidative stress. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Capacidad de las macrofitas Lemna minor y Eichhornia crassipes para eliminar el niquel

    Directory of Open Access Journals (Sweden)

    BRES, P

    2012-04-01

    Full Text Available El objetivo de este trabajo fue estudiar la capacidad de dos especies de macrofitas, Lemna minor y Eichhornia crassipes, para eliminar el níquel. Se realizaron cuatro tratamientos durante dos semanas para cada una de las especies. Las plantas fueron incubadas con 0, 1, 3 y 6 mg l-1 de Ni. Ambas especies mostraron, en todos los tratamientos con Ni, una reducción en la concentración a lo largo del tiempo. L. minor mostró ser más eficiente para remover este ión a la más baja concentración. Sin embargo, en concentraciones más elevadas no se observaron diferencias entre ambas especies. El análisis del tejido de las plantas mostró que las mismas acumulaban el metal, en los tres casos evaluados con concentraciones diferentes.Palabras clave: fitorremediación, metales pesados, plantas acuáticas, acumulación.

  11. Diferenciación molecular de Lemna aequinoctialis y L. Valdiviana (lemnaceae por patrones proteicos

    Directory of Open Access Journals (Sweden)

    Mª del Milagro Montero Rojas

    2016-03-01

    Full Text Available El estudio se llevó a cabo en el Laboratorio de Genética Molecular de la Universidad Nacional, Heredia, Costa Rica. Se utilizaron plantas acuáticas macrófitas de Lemna valdiviana y L. aequinoctialis previamente identificadas. Estas especies habitan en aguas ricas en sales disueltas y aguas servidas. Recientemente se les consideró como un indicador de la contaminación ocasionada por pesticidas y herbicidas en el agua. La composición proteica llega a niveles entre 38 y 43% de materia seca, importante para diversos usos. La extracción de proteínas totales, por medio de electroforesis discontinua en gel de poliacrilamida, se realizó en condiciones reductoras con SDS (SDS-PAGE. Los geles separadores empleados fueron al 8 y 10%, gel espaciador al 4% y la tinción se efectuó con azul commassie. Los diversos patrones proteicos reflejaron diferencias genéticas entre ambas especies que se pueden deber a las diferencias de hábitat y de reproducción.

  12. Uptake of Cadmium by Lemna minor, a (hyper?- accumulator plant involved in phytoremediation applications

    Directory of Open Access Journals (Sweden)

    Bianconi D.

    2013-04-01

    Full Text Available Metal pollution in waters and soils is a major environmental and human health problem. Cadmium (Cd2+ is a heavy metal displaying toxic effects in plants. In this work we studied the potentiality of Lemna minor, a monocotyledonous aquatic macrophyte, to phytoremediate cadmium-polluted waters. The plants were exposed to different cadmium concentrations 0, 13, 22 and 46μM CdSO4 for a period of 24, 48 and 72 hours. Relative growth rates (RGR, bioconcentration factor (BCF, tolerance index (Ti, cadmium uptake in whole plant and maximum efficiency of PSII (Fv/Fm were measured under controlled climate conditions. RGR, Ti and Fv/Fm declined with increasing exposure time and cadmium concentrations, while the BCF and cadmium uptake showed an opposite behavior. Data analysis of RGR, BCF, Tiand FV/FM indicates that L. minor maintains a good capacity of growth, metal bioconcentration, tolerance and efficiency of PSII up to 48h in plants exposed to 13 and 22μM CdSO4. Our results exhibited that L. minor is a good cadmium accumulator and is able to remediate Cd-polluted waters, especially at low Cd concentrations.

  13. Catalytic production of levulinic acid and ethyl levulinate from uniconazole-induced duckweed (Lemna minor).

    Science.gov (United States)

    Liu, Chunguang; Feng, Qingna; Yang, Jirui; Qi, Xinhua

    2018-05-01

    Duckweed (Lemna minor) with a high starch content of 50.4% was cultivated by uniconazole-induction method. The cultivated duckweed was used to produce value-added chemicals such as glucose, levulinic acid and formic acid in diluted HCl aqueous solution. A high glucose yield of 93.4% (471 g/kg based on loading duckweed mass) could be achieved at 180 °C in short reaction time, and the generated glucose was converted into levulinic acid and formic acid with yields of 52.0% and 34.1%, respectively, for 150 min, corresponding to 262 g/kg levulinic acid yield and 171 g/kg formic acid yield based on the mass of loading duckweed, respectively. Moreover, the duckweed was efficiently converted to ethyl levulinate with 55.2% yield (400.6 g/kg) at 200 °C in ethanol. This work provides a promising strategy for the production of value-added chemicals from phytoplankton that is able to purify the wastewater containing high content of P and N. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Thorough removal of inorganic and organic mercury from aqueous solutions by adsorption on Lemna minor powder

    International Nuclear Information System (INIS)

    Li Shunxing; Zheng Fengying; Huang Yang; Ni Jiancong

    2011-01-01

    The adsorption ability of duckweed (Lemna minor) powders for removing inorganic and organic mercury (methyl and ethyl mercury) has been studied using cold vapour atomic absorption spectrometry. The optimal adsorption conditions were: (a) the pH value of the solution 7.0 for inorganic and ethyl mercury, 9.0 for methyl mercury, and (b) equilibrium adsorption time 10, 20, and 40 min for inorganic mercury, methyl mercury, and ethyl mercury, respectively. After adsorption by L. minor powder for 40 min, when the initial concentrations of inorganic and organic mercury were under 12.0 μg L -1 and 50.0 μg L -1 , respectively, the residual concentrations of mercury could meet the criterion of drinking water (1.0 μg L -1 ) and the permitted discharge limit of wastewater (10.0 μg L -1 ) set by China and USEPA, respectively. Thorough removal of both inorganic and organic mercury from aqueous solutions was reported for the first time. The significant adsorption sites were C-O-P and phosphate groups by the surface electrostatic interactions with aqueous inorganic and organic mercury cations, and then the selective adsorption was resulted from the strong chelating interaction between amine groups and mercury on the surface of L. minor cells.

  15. Apport du traitement d'images dans le suivi de l'influence des teneurs en nutriments sur la croissance des lentilles d'eau (Lemna minor

    Directory of Open Access Journals (Sweden)

    Tangou, TT.

    2014-01-01

    Full Text Available Contribution of image processing in monitoring the influence of nutrients on the growth of duckweed (Lemna minor. The growth of duckweed (Lemna minor is an important component in the treatment process in wastewater floating macrophyte ponds. An excess or shortage of this biomass may be responsible for the dysfunction of such ponds. Modeling these duckweed ponds through mass balances based on Petersen's matrix may be helpful in facilitating the optimal management of such facilities. This study sought to assess the efficiency of digital image processing in the growth monitoring of Lemna minor under different concentrations of nitrogen and phosphorus. The experiments were carried out in a growth chamber (phytotron using an experimental pilot involving initial fresh Lemna minor biomass (1 g, nitrogen and phosphorus concentrations varying between 5 and 64 mg N-NH4+·l-1, and 1 and 24 mg P-PO43-·-1, respectively. Digital image processing was achieved in addition to gravimetric methods (fresh weight and/or dry weight. Our results showed that the image processing method allowed a continuous and non-destructive monitoring of duckweed biomass. The growth of Lemna minor progressively decreased when nitrogen and phosphorus concentrations were greater than 16 mg N-NH4+·l-1 and 6 mg P-PO43-·-1. The maximum growth rates μmax were of the order of 0.07 d-1. The kinetic constants KS and KI were respectively 3.83 mg·l-1 and 204 mg·l-1 for nitrogen, and 1.26 mg·l-1 and 13.3 mg·l-1 for phosphorus. Such results are interesting as they could contribute to the optimal management of Lemna minor and the modeling of biological reactors.

  16. Characterization of indole acetic acid endophyte producers in ...

    African Journals Online (AJOL)

    Valued Acer Customer

    2015-02-18

    academicjournals.org/AJB. African Journal of Biotechnology. Full Length Research Paper. Characterization of indole acetic acid endophyte producers in authoctonus Lemna gibba plants from. Xochimilco Lake. Orlando Ortega-Acosta.

  17. Micro-scale elemental partition in tissues of the aquatic plant Lemna minor L. exposed to highway drainage water

    Energy Technology Data Exchange (ETDEWEB)

    Mendes Godinho, R., E-mail: rmgodinho@yahoo.com [IST/ITN, Instituto Superior Técnico, Universidade Técnica de Lisboa, EN 10, 2686-953 Sacavém (Portugal); IPMA Instituto Português do Mar e da Atmosfera, Lisboa 1449-006 (Portugal); Raimundo, J.; Vale, C.; Anes, B.; Brito, P. [IPMA Instituto Português do Mar e da Atmosfera, Lisboa 1449-006 (Portugal); Alves, L.C.; Pinheiro, T. [IST/ITN, Instituto Superior Técnico, Universidade Técnica de Lisboa, EN 10, 2686-953 Sacavém (Portugal); CFNUL – Centro de Física Nuclear da Universidade de Lisboa (Portugal)

    2013-07-01

    In the scope of a monitoring program to assess the environmental impact of automobile traffic over one main bridge in Lisbon, both water and duckweed (Lemna minor L.) were sampled from the road drainage tanks and analyzed for chemical elements. Plants uptake Cr, Mn, Cu, and Zn metals from rain water draining the bridge road. Nuclear microprobe elemental maps of cryosections of L. minor tissues showed that incorporated elements were internalized in fronds of the plant. This approach at micrometer level allows a better knowledge of the elemental tissue partitioning in this biomonitor organism.

  18. Modeling the interaction of light intensity, nutrient concentration and uranium toxicity in Lemna minor

    Energy Technology Data Exchange (ETDEWEB)

    Zimmer, E.; Horemans, N.; Vandenhove, H. [Belgian Nuclear Research Centre SCK-CEN (Belgium); Cedergreen, N. [University of Copenhagen (Denmark); Jager, T. [Vrije Universiteit Amsterdam (Netherlands)

    2014-07-01

    Radioecology aims at assessing the effect of radionuclides and radiation on the environment. Since we cannot test every possible environmental situation in the laboratory, we need modeling approaches to extrapolate the results of toxicity assays to environmentally relevant scenarios. Therefore, it is of crucial importance to understand the effect of relevant environmental factors, such as nutrients, temperature and light on the toxicity of the test. Radionuclides are often found to induce the production of reactive oxygen species (ROS). In plants, an overload of ROS can lead to disturbances of the photosynthetic system. Since the light intensity determines the efficiency of the photo-systems in plants, it can be expected to interact with the effect of radionuclides. The nutrient concentration of the test medium determines the physiological state of the plant, affecting in turn the plant's capability of dealing with stress and hence influences the toxicity of the contaminant. To study the interaction of stressors with environmental conditions, mechanistic effect modeling is promoted widely in ecotoxicology. In principle, the modelling aims at a mechanistic understanding of the different processes causing the stress individually, and integrating them in one framework to study their joint effect and possible interaction. We here present a mechanistic effect model for Lemna minor (common duckweed), which is based on Dynamic Energy Budget (DEB) theory. Models based on DEB have been used widely to study the effects of compounds on animals. Due to its general applicability to all types of organisms, it holds potential to be used for comparison of species and compounds in a broad context. Energy uptake from the environment is modeled explicitly, and metabolic rates are set to depend on temperature in DEB models. Therefore, they can be used to extrapolate effects to a wide range of environmentally relevant scenarios. Until now, the DEB research in ecotoxicology has

  19. Duckweed (Lemna minor as a model plant system for the study of human microbial pathogenesis.

    Directory of Open Access Journals (Sweden)

    Yong Zhang

    Full Text Available BACKGROUND: Plant infection models provide certain advantages over animal models in the study of pathogenesis. However, current plant models face some limitations, e.g., plant and pathogen cannot co-culture in a contained environment. Development of such a plant model is needed to better illustrate host-pathogen interactions. METHODOLOGY/PRINCIPAL FINDINGS: We describe a novel model plant system for the study of human pathogenic bacterial infection on a large scale. This system was initiated by co-cultivation of axenic duckweed (Lemna minor plants with pathogenic bacteria in 24-well polystyrene cell culture plate. Pathogenesis of bacteria to duckweed was demonstrated with Pseudomonas aeruginosa and Staphylococcus aureus as two model pathogens. P. aeruginosa PAO1 caused severe detriment to duckweed as judged from inhibition to frond multiplication and chlorophyll formation. Using a GFP-marked PAO1 strain, we demonstrated that bacteria colonized on both fronds and roots and formed biofilms. Virulence of PAO1 to duckweed was attenuated in its quorum sensing (QS mutants and in recombinant strains overexpressing the QS quenching enzymes. RN4220, a virulent strain of S. aureus, caused severe toxicity to duckweed while an avirulent strain showed little effect. Using this system for antimicrobial chemical selection, green tea polyphenols exhibited inhibitory activity against S. aureus virulence. This system was further confirmed to be effective as a pathogenesis model using a number of pathogenic bacterial species. CONCLUSIONS/SIGNIFICANCE: Our results demonstrate that duckweed can be used as a fast, inexpensive and reproducible model plant system for the study of host-pathogen interactions, could serve as an alternative choice for the study of some virulence factors, and could also potentially be used in large-scale screening for the discovery of antimicrobial chemicals.

  20. Listeria weihenstephanensis sp. nov., isolated from the water plant Lemna trisulca taken from a freshwater pond.

    Science.gov (United States)

    Lang Halter, Evi; Neuhaus, Klaus; Scherer, Siegfried

    2013-02-01

    The phylogenetic position and phenotypic characteristics of two non-spore-forming bacilli similar to members of the genus Listeria were studied. The gram-reaction-positive, slightly motile, facultatively anaerobic strains were isolated from the water plant Lemna trisulca sampled from a freshwater pond in Bavaria, Germany. Although no identification was possible employing the API Listeria test (bioMérieux), 16S rRNA sequence analysis confirmed a close phylogenetic similarity to Listeria rocourtiae DSM 22097(T) (99.0 % sequence similarity) and a more distant relationship to other Listeria species (96.0 % to Listeria monocytogenes DSM 20600(T) and 95.0 % similarity to Listeria grayi DSM 20601(T)). DNA-DNA hybridization analysis between the isolates and Listeria rocourtiae DSM 22097(T) yielded a similarity of 22.5 %. Analysis of partial sequences of sigB, prs, recA and HSP60 were studied and compared with those of other members of the genus Listeria and Brochothrix thermosphacta DSM 20171(T) supporting the relationships indicated by 16S rRNA gene sequences. The studied isolates were non-haemolytic and were not associated with cases of human or animal disease. While the results demonstrate that the strains belong to the genus Listeria, phenotypic and genotypic differences from Listeria rocourtiae DSM 22097(T) suggest that the strains represent a novel species for which the name Listeria weihenstephanensis sp. nov. is proposed; the type strain is WS 4560(T) ( = DSM 24698(T) = LMG 26374(T)), with WS 4615 ( = DSM 24699 = LMG 26375) as a second strain of the species.

  1. A simple method for analysing the effects of algae on the growth of Lemna and preventing algal growth in duckweed bioassays

    NARCIS (Netherlands)

    Szabo, S.; Roijackers, R.M.M.; Scheffer, M.

    2003-01-01

    A simple novel method for indoor culture experiments with small floating water plants, such as Lemnaceae, is described. Experiments demonstrate that the method allows for longer lasting culture experiments with Lemna, avoiding algal growth and self-shading of fronds by overcrowding. This is achieved

  2. The influence of barley straw extract addition on the growth of duckweed (Lemna valdiviana Phil. under laboratory conditions

    Directory of Open Access Journals (Sweden)

    Pęczuła W.

    2014-01-01

    Full Text Available Due to its ability to forming dense mats in small waterbodies, duckweeds are often considered as nuisance plants in some freshwaters. Up to now, few techniques had been tested aiming towards managing duckweeds, but all of them had appeared to have some disadvantages. As an attempt to find a new effective management tool, a laboratory experiment assessing the influence of barley straw (BS extract addition – a substance used in algal bloom control, upon the growth of the duckweed Lemna valdiviana, was performed. Reaction on two various concentrations of BS extract were quantified by measurements of changes in duckweed biomass and root length. The results showed that plants which have received the extract increased their biomass slower than that of the control, however only those with the addition of smaller amounts of BS differed significantly from the controls. Furthermore, BS addition stimulated the root growth in both experimental tanks. This implies that the mean roots length was higher, although the statistical differences were insignificant. As possible explanation for the observed changes we suggest that: (1 the growth inhibition of Lemna valvidiana under exposition to BS extract might be induced by an uptake of organic compounds from which some (phenolic substances are (probably toxic; (2 competitive interactions with the microbial communities developed upon the duckweed roots might play a role as well.

  3. ANALISIS PENGARUH VARIASI SUHU dan WAKTU PADA PROSES HIDROLISIS TERHADAP KADAR GLUKOSA DALAM PEMANFAATAN Lemna minor SEBAGAI BIOETANOL

    Directory of Open Access Journals (Sweden)

    Vivi Mayangsari

    2014-10-01

    Full Text Available Energi terbarukan sangatlah diperlukan karena semakin meluasnya krisis energi sehingga memerlukan alternatif selain penggunaan bahan bakar fosil, penggunaan bioethanol merupakan alternatif yang baik karena banyak kelebihanya. Lemna minor merupakan salah satu tumbuhan yang berpotensi sebagai bioethanol, hal ini dapat dilihat dari kandungan glukosanya yang tinggi. Tujuan penelitian ini adalah untuk mengetahui hubungan waktu dan suhu pada proses hidrolisis terhadap nilai kadar glukosa serta mengetahui hubungan densitas terhadap kadar etanol. Proses ekstrasi glukosa menggunakan perbandingan volume HCl dengan kosentrasi 0,1 N, berat serbuk Lemna minor dan volume aquades yaitu 1:10:100 dengan variasi waktu ekstrasi 60, 90, dan 120 menit pada variasi suhu 60, 70, 80 °C dengan ukuran serbuk 60 mesh. Hasil penelitian ekstrasi hidrolisis terbaik pada menit ke-90 didapatkan panjang gelombang tertinggi 415 nm. Semua glukosa pada ekstrasi 90 menit difermentasi menggunakan bakteri Saccharomiches cerevisiae sebanyak 10% dari volume glukosa dengan waktu 144 jam, setelah fermentasi selesai sampel didestilasi untuk menghilangkan kadar air dan dihasilkan kadar ethanol terbaik 0,47% dengan densitas 0,9345 gr/ml3pada panjang gelombang larutan glukosa 316 nm.

  4. ANALISIS PENGARUH VARIASI PERSENTASE RAGI (Saccharomyces cerevisiae DAN WAKTU PADA PROSES FERMENTASI DALAM PEMANFAATAN DUCKWEED (Lemna minor SEBAGAI BIOETANOL

    Directory of Open Access Journals (Sweden)

    Siti Khodijah

    2015-04-01

    Full Text Available Salah satu alternatif dalam mendukung ketersediaan sumber daya energi terbarukan adalah dengan memanfaatkan sumber dari non fosil seperti bioetanol. Bioetanol merupakan etanol yang dibuat dari biomass yang mengandung komponen pati (karbohidrat atau selulosa yang selanjutnya di fermentasi menggunakan bantuan mikroorganisme (Sacharomyces cerevisiae. Karbohidrat yang digunakan pada penelitian ini berasal dari Lemna minor (Duckweed. Penelitian ini bertujuan membuat bioetanol dari Lemna minor dengan variasi penambahan ragi dan lamanya waktu fermentasi terhadap nilai kadar etanol dan nilai densitas, serta mengetahui hubungan densitas dengan kadar etanol. Produksi bioetanol dari tanaman yang mengandung pati (karbohidrat, dilakukan melalui proses konversi karbohidrat menjadi gula (glukosa dengan hidrolisis asam (HCl, hidrolisat yang diperoleh selanjutnya dilakukan fermentasi dengan menambahkan yeast atau ragi sehingga diperoleh bioetanol. Variabel yang digunakan adalah perubahan massa ragi 5%,15%, dan 25% serta lama fermentasi 5, 6, dan 7 hari . Hasil penelitian menunjukkan lama fermentasi dan persentase ragi mempengaruhi kadar etanol. Nilai kadar etanol optimum diperoleh presentase ragi 25% dengan lama fermentasi 7 hari sebesar 3.81% dengan density optimum sebesar 0.9438 gr/cm3, Hubungan nilai densitas berbanding terbalik dengan peningkatan kadar etanol.

  5. Fate, toxicity and bioconcentration of cadmium on Pseudokirchneriella subcapitata and Lemna minor in mid-term single tests.

    Science.gov (United States)

    Clément, Bernard; Lamonica, Dominique

    2018-03-01

    In the frame of a project which consists in modeling a laboratory microcosm under cadmium pressure, we initiated this study on the fate and effects of cadmium in the presence of either the microalga Pseudokirchneriella subcapitata or the duckweed Lemna minor, two organisms of the microcosm. For each organism, growth inhibition tests on a duration of 2-3 weeks were carried out with the objective of linking effects with total dissolved, ionic and internalized forms of cadmium. Numbers of organisms (algal cells or duckweed fronds) in 2-L beakers filled with synthetic nutritive medium containing EDTA were counted during the course of assays, while cadmium concentrations in the water and in the organisms were measured. Free cadmium fraction was calculated using PHREEQC, a computer program for chemical speciation. Results showed that cadmium toxicity to microalgae could be correlated to the free divalent fraction of this metal, limited by the presence of EDTA, and to its concentration in the organisms. Bioconcentration factors for our medium were suggested for P. subcapitata (111,000 on the basis of free cadmium concentration) and L. minor (17,812 on the basis of total dissolved concentration). No effect concentrations were roughly estimated around 400 µg/g for Pseudokirchneriella subcapitata and 200-300 µg/g for Lemna minor. This study is a first step towards a fate model based on chemical speciation for a better understanding of microcosm results.

  6. Genetic programming-based mathematical modeling of influence of weather parameters in BOD5removal by Lemna minor.

    Science.gov (United States)

    Chandrasekaran, Sivapragasam; Sankararajan, Vanitha; Neelakandhan, Nampoothiri; Ram Kumar, Mahalakshmi

    2017-11-04

    This study, through extensive experiments and mathematical modeling, reveals that other than retention time and wastewater temperature (T w ), atmospheric parameters also play important role in the effective functioning of aquatic macrophyte-based treatment system. Duckweed species Lemna minor is considered in this study. It is observed that the combined effect of atmospheric temperature (T atm ), wind speed (U w ), and relative humidity (RH) can be reflected through one parameter, namely the "apparent temperature" (T a ). A total of eight different models are considered based on the combination of input parameters and the best mathematical model is arrived at which is validated through a new experimental set-up outside the modeling period. The validation results are highly encouraging. Genetic programming (GP)-based models are found to reveal deeper understandings of the wetland process.

  7. Diversidad genética entre especies del género lemna (lemnaceae utilizando fragmentos polimórficos de ADN amplificados al azar (rapds

    Directory of Open Access Journals (Sweden)

    Frank Solano Campos

    2016-03-01

    Full Text Available Lemna aequinoctialis and Lemna valdiviana were tested genetic similarity by random amplified polymorphic DNA (RAPD fingerprinting. Of 60 primers (10-mer tested, 26 generated polymorphic products. 143 bands were found from 200bp up to 1500bp, 109 were polymorphic (76,2%, with an average of 4,19. Of these, only 18 were specific of L. aequinoctialis, while 91 bands were specific for L. valdiviana. Data were used to generate Jaccard’s similarity coefficients and to construct a dendrogram using UPGMA method in the BiodiversityPro statistical package. It is concluded from this study that there were clear differences (high genetic diversity between L. aequinoctialis and L. valdiviana and that RAPD sesults are comparable with those obtained from studies on morphology, It is a practical method to assess the relationships between these species.

  8. Plant growth-promoting bacterium Acinetobacter calcoaceticus P23 increases the chlorophyll content of the monocot Lemna minor (duckweed) and the dicot Lactuca sativa (lettuce).

    Science.gov (United States)

    Suzuki, Wakako; Sugawara, Masayuki; Miwa, Kyoko; Morikawa, Masaaki

    2014-07-01

    Acinetobacter calcoaceticus P23 is a plant growth-promoting bacterium that was isolated from the surface of duckweed (Lemna aoukikusa). The bacterium was observed to colonize on the plant surfaces and increase the chlorophyll content of not only the monocotyledon Lemna minor but also the dicotyledon Lactuca sativa in a hydroponic culture. This effect on the Lactuca sativa was significant in nutrient-poor (×1/100 dilution of H2 medium) and not nutrient-rich (×1 or ×1/10 dilutions of H2 medium) conditions. Strain P23 has the potential to play a part in the future development of fertilizers and energy-saving hydroponic agricultural technologies. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  9. Synthesis of the (9R,13R)-isomer of LDS1, a flower-inducing oxylipin isolated from Lemna paucicostata.

    Science.gov (United States)

    Takayasu, Yuki; Ogura, Yusuke; Towada, Ryo; Kuwahara, Shigefumi

    2016-08-01

    The first synthesis of the (9R,13R)-stereoisomer of LDS1, a flower-inducing oxylipin isolated from Lemna paucicostata, has been achieved from a known allylic alcohol by a seven-step sequence that involves the Horner-Wadsworth-Emmons olefination to construct its full carbon framework and an enzymatic hydrolysis of a penultimate methyl ester intermediate to provide the target molecule.

  10. Performance of the macrophyte Lemna valdiviana in tertiary pig waste treatment and its contribution to the sustainability of swine production

    Directory of Open Access Journals (Sweden)

    Flávio R. Lapolli

    2008-03-01

    Full Text Available The present study aims to contribute to the sustainability of swine production by evaluating usage of the aquatic macrophyte Lemna valdiviana in the tertiary treatment of pig waste. Five assays (1 to 5 in triplicate were conducted using swine effluent with different COD (Chemical Oxygen Demand concentrations: 400, 550, 700, 850 and 1,000mg.L-1, respectively. The trial lasted for 21 days and the evaluated variables were: (a pollutant removal efficiency, (b biomass production and (c plant protein content under the different detention times of 7, 14 and 21 days. In general, assays 1 and 2 (CODs of 400 and 550mg.L-1 presented the best removal efficiencies under a detention time of 21 days. Regarding the purpose of both nutrient removal and production of high protein biomass, assay 3 (COD of 700mg.L-1 showed the best results under 14 days’ detention time (36.81% crude protein. It was established that the use of duckweeds in the tertiary swine waste treatment was able to provide a sustainable alternative regarding its advantages such as effluent polishing, minimization of environmental impact, and production of high protein feed.

  11. Effects of exposure to nano and bulk sized TiO2and CuO in Lemna minor.

    Science.gov (United States)

    Dolenc Koce, Jasna

    2017-10-01

    Nanoparticles of TiO 2 and CuO are among most commonly used nanoparticles, and elevated concentrations of them are expected to be found in all environments, including aquatic. A standard growth inhibition test ISO/CD 20079 was used to determine the toxicity of nano sized and larger micro sized (bulk) particles in the concentrations of 0.1, 1, 10, 100 and 1000 μM CuO and TiO 2 on common duckweed (Lemna minor L.). Both nano and bulk CuO particles caused changes in the structure and function of treated plants. The number of fronds and colonies decreased by as much as 78%, the length of roots and fronds decreased by 99% and 14%, respectively. Furthermore, photochemical efficiency was reduced by up to 35%, and the activities of antioxidative enzymes guaiacol peroxidase, ascorbate peroxidase and glutathione reductase increased by more than 240%. The altered physiological state of the CuO exposed plants was also reflected in the elevated occurrence of necrosis and bleaching in the duckweed colonies. Nano sized particles of CuO proved more phytotoxic than bulk particles, and the effects of both studied CuO sizes were concentration dependent. On the other hand, both bulk and nano sized particles of TiO 2 caused no severe phytotoxic effects, there was no concentration dependence and they could be considered as non-harmful to common duckweed. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  12. Influence of nutrient medium composition on uranium toxicity and choice of the most sensitive growth related endpoint in Lemna minor.

    Science.gov (United States)

    Horemans, Nele; Van Hees, May; Saenen, Eline; Van Hoeck, Arne; Smolders, Valérie; Blust, Ronny; Vandenhove, Hildegarde

    2016-01-01

    Uranium (U) toxicity is known to be highly dependent on U speciation and bioavailability. To assess the impact of uranium on plants, a growth inhibition test was set up in the freshwater macrophyte Lemna minor. First growth media with different compositions were tested in order to find a medium fit for testing U toxicity in L. minor. Following arguments were used for medium selection: the ability to sustain L. minor growth, a high solubility of U in the medium and a high percentage of the more toxic U-species namely UO2(2+). Based on these selection criteria a with a low phosphate concentration of 0.5 mg L(-1) and supplemented with 5 mM MES (2-(N-morpholino)ethanesulfonic acid) to ensure pH stability was chosen. This medium also showed highest U toxicity compared to the other tested media. Subsequently a full dose response curve for U was established by exposing L. minor plants to U concentrations ranging from 0.05 μM up to 150 μM for 7 days. Uranium was shown to adversely affect growth of L. minor in a dose dependent manner with EC10, EC30 and EC50 values ranging between 1.6 and 4.8 μM, 7.7-16.4 μM and 19.4-37.2 μM U, respectively, depending on the growth endpoint. Four different growth related endpoints were tested: frond area, frond number, fresh weight and dry weight. Although differences in relative growth rates and associated ECx-values calculated on different endpoints are small (maximal twofold difference), frond area is recommended to be used to measure U-induced growth effects as it is a sensitive growth endpoint and easy to measure in vivo allowing for measurements over time. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Ecotoxicological evaluation of propranolol hydrochloride and losartan potassium to Lemna minor L. (1753) individually and in binary mixtures.

    Science.gov (United States)

    Godoy, Aline A; Kummrow, Fábio; Pamplin, Paulo Augusto Z

    2015-07-01

    Antihypertensive pharmaceuticals, including the beta-blockers, are one of the most detected therapeutic classes in the environment. The ecotoxicity of propranolol hydrochloride and losartan potassium was evaluated, both individually and combined in a binary mixture, by using the Lemna minor growth inhibition test. The endpoints evaluated in the single-pharmaceutical tests were frond number, total frond area and fresh weight. For the evaluation of the mixture toxicity, the selected endpoint was frond number. Water quality criteria values (WQC) were derived for the protection of freshwater and saltwater pelagic communities regarding the effects induced by propranolol and losartan using ecotoxicological data from the literature, including our data. The risks associated with both pharmaceutical effects on non-target organisms were quantified through the measured environmental concentration (MEC)/predicted-no-effect concentration (PNEC) ratios. For propranolol, the total frond area was the most sensitive endpoint (EC50 = 77.3 mg L(-1)), while for losartan there was no statistically significant difference between the endpoints. Losartan is only slightly more toxic than propranolol. Both concentration addition and independent action models overestimated the mixture toxicity of the pharmaceuticals at all the effect concentration levels evaluated. The joint action of both pharmaceuticals showed an antagonistic interaction to L. minor. Derived WQC assumed lower values for propranolol than for losartan. The MEC/PNEC ratios showed that propranolol may pose a risk for the most sensitive aquatic species, while acceptable risks posed by losartan were estimated for most of aquatic matrices. To the authors knowledge these are the first data about losartan toxicity for L. minor.

  14. Getting More Ecologically Relevant Information from Laboratory Tests: Recovery of Lemna minor After Exposure to Herbicides and Their Mixtures.

    Science.gov (United States)

    Knežević, Varja; Tunić, Tanja; Gajić, Pero; Marjan, Patricija; Savić, Danko; Tenji, Dina; Teodorović, Ivana

    2016-11-01

    Recovery after exposure to herbicides-atrazine, isoproturon, and trifluralin-their binary and ternary mixtures, was studied under laboratory conditions using a slightly adapted standard protocol for Lemna minor. The objectives of the present study were (1) to compare empirical to predicted toxicity of selected herbicide mixtures; (2) to assess L. minor recovery potential after exposure to selected individual herbicides and their mixtures; and (3) to suggest an appropriate recovery potential assessment approach and endpoint in a modified laboratory growth inhibition test. The deviation of empirical from predicted toxicity was highest in binary mixtures of dissimilarly acting herbicides. The concentration addition model slightly underestimated mixture effects, indicating potential synergistic interactions between photosynthetic inhibitors (atrazine and isoproturon) and a cell mitosis inhibitor (trifluralin). Recovery after exposure to the binary mixture of atrazine and isoproturon was fast and concentration-independent: no significant differences between relative growth rates (RGRs) in any of the mixtures (IC10 Mix , 25 Mix , and 50 Mix ) versus control level were recorded in the last interval of the recovery phase. The recovery of the plants exposed to binary and ternary mixtures of dissimilarly acting herbicides was strictly concentration-dependent. Only plants exposed to IC10 Mix , regardless of the herbicides, recovered RGRs close to control level in the last interval of the recovery phase. The inhibition of the RGRs in the last interval of the recovery phase compared with the control level is a proposed endpoint that could inform on reversibility of the effects and indicate possible mixture effects on plant population recovery potential.

  15. Citric acid enhanced the antioxidant defense system and chromium uptake by Lemna minor L. grown in hydroponics under Cr stress.

    Science.gov (United States)

    Sallah-Ud-Din, Rasham; Farid, Mujahid; Saeed, Rashid; Ali, Shafaqat; Rizwan, Muhammad; Tauqeer, Hafiz Muhammad; Bukhari, Syed Asad Hussain

    2017-07-01

    Phytoextraction is a cost-effective and eco-friendly technique for the removal of pollutants, mainly heavy metal(loids) especially from polluted water and metal-contaminated soils. The phytoextraction of heavy metals is, in general, limited due to the low availability of heavy metals in the growth medium. Organic chelators can help to improve the phytoextraction by increasing metal mobility and solubility in the growth medium. The present research was carried out to examine the possibility of citric acid (CA) in improving chromium (Cr) phytoextraction by Lemna minor (duckweed). For this purpose, healthy plants were collected from nearby marsh and grown in hydroponics under controlled conditions. Initial metal contents of both marsh water and plant were measured along with physico-chemical properties of the marsh water. Different concentrations of Cr and CA were applied in the hydroponics in different combinations after defined intervals. Continuous aeration was supplied and pH maintained at 6.5 ± 0.1. Results showed that increasing concentration of Cr significantly decreased the plant biomass, photosynthetic pigments, leaf area, and antioxidant enzyme activities (like catalase, ascorbate peroxidase, superoxide dismutase, peroxidase). Furthermore, Cr stress increased the Cr concentrations, electrolyte leakage, hydrogen peroxide, and malondialdehyde contents in plants. The addition of CA alleviated the Cr-induced toxicity in plants and further enhanced the Cr uptake and its accumulation in L. minor. The addition of CA enhanced the Cr concentration in L. minor by 6.10, 26.5, 20.5, and 20.2% at 0, 10, 100, and 200 μM Cr treatments, respectively, compared to the respective Cr treatments without CA. Overall, the results of the present study showed that CA addition may enhance the Cr accumulation and tolerance in L. minor by enhancing the plant growth and activities of antioxidant enzymes.

  16. A marriage of convenience; a simple food chain comprised of Lemna minor (L.) and Gammarus pulex (L.) to study the dietary transfer of zinc.

    Science.gov (United States)

    Lahive, E; O'Halloran, J; Jansen, M A K

    2015-01-01

    Macrophytes contribute significantly to the cycling of metals in aquatic systems, through accumulation during growth and release during herbivory or decomposition. Accumulation of high levels of metals has been extensively documented in Lemnaceae (duckweeds). However, the degree of trophic transfer of metals from Lemnaceae to secondary consumers remains poorly understood. This study demonstrates that zinc accumulated in Lemna minor is bioavailable to the herbivore consumer Gammarus pulex. Overall, the higher the zinc content of L. minor, the more zinc accumulated in G. pulex. Accumulation in G. pulex was such that mortality occurred when they were fed high zinc-containing L. minor. Yet, the percentage of consumed zinc retained by G. pulex actually decreased with higher zinc concentrations in L. minor. We hypothesise that this decrease reflects internal zinc metabolism, including a shift from soluble to covalently bound zinc in high zinc-containing L. minor. Consistently, relatively more zinc is lost through depuration when G. pulex is fed L. minor with high zinc content. The developed Lemna-Gammarus system is simple, easily manipulated, and sensitive enough for changes in plant zinc metabolism to be reflected in metal accumulation by the herbivore, and therefore suitable to study ecologically relevant metal cycling in aquatic ecosystems. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

  17. Salt and cadmium stress tolerance caused by overexpression of the Glycine Max Na+/H+ Antiporter (GmNHX1) gene in duckweed (Lemna turionifera 5511).

    Science.gov (United States)

    Yang, Lin; Han, Yujie; Wu, Di; Yong, Wang; Liu, Miaomiao; Wang, Sutong; Liu, Wenxin; Lu, Meiyi; Wei, Ying; Sun, Jinsheng

    2017-11-01

    Cadmium (Cd) pollution has aroused increasing attention due to its toxicity. It has been proved that Na + /H + Antiporter (NHX1) encodes a well-documented protein in Na + /H + trafficking, which leads to salt tolerance. This study showed that Glycine max Na + /H + Antiporter (GmNHX1) improved short-term cadmium and salt resistance in Lemna turionifera 5511. Expression of GmNHX1 prevented root from abscission and cell membrane damage, which also can enhance antioxidant system, inhibited of reactive oxygen species (ROS) accumulation and cause a less absorption of Cd under cadmium and salt stress. The cadmium tolerance suggested that NHX1 was involved under the cadmium stress. Copyright © 2017. Published by Elsevier B.V.

  18. Combined effects of elevated CO{sub 2} and Cd-contaminated water on growth, photosynthetic response, Cd accumulation and thiolic components status in Lemna minor L

    Energy Technology Data Exchange (ETDEWEB)

    Pietrini, F.; Bianconi, D.; Massacci, A. [Institute of Agro-Environmental and Forest Biology, National Research Council of Italy, Via Salaria Km 29,300, 00015 Monterotondo Scalo, Roma (Italy); Iannelli, M.A., E-mail: adelaide.iannelli@ibba.cnr.it [Institute of Agricultural Biology and Biotechnology, National Research Council of Italy, Via Salaria Km 29,300, 00015 Monterotondo Scalo, Roma (Italy)

    2016-05-15

    Highlights: • Elevated CO{sub 2} did not affect the ability of L. minor plants to accumulate Cd in their tissues. • Elevated CO{sub 2} decreased Cd toxicity in L. minor plants by increasing photosynthesis. • Elevated CO{sub 2} reduced Cd toxicity in duckweed by enhancing antioxidant system. - Abstract: The objective of this study was to investigate the combined effects of elevated CO{sub 2} and cadmium (Cd) treatments on growth, photosynthetic efficiency and phytoremediation ability in Lemna minor L. Plants of L. minor were exposed to different Cd concentrations (0, 1.5, 2.5 and 5 mg L{sup −1} Cd) for periods of 24, 48 and 72 h at ambient (AC) and at elevated (EC) CO{sub 2} (350 and 700 ppm, respectively). Cadmium concentration, bioconcentration factor, enzyme activities and thiols content enhanced in plants with the increase of Cd treatments, time of exposure and at both CO{sub 2} levels. Glutathione levels increased only at AC. Growth, photosynthetic and chlorophyll fluorescence parameters, and the reduced glutathione to oxidized glutathione ratio declined in plants with increasing exposure time, Cd treatments and at both CO{sub 2} levels. Our results suggested that the alleviation of toxicity, at low Cd doses, observed in L. minor grown at EC is dependent on both increased photosynthesis and an enhanced antioxidant capacity.

  19. Microbial Detoxification of Deoxynivalenol (DON), Assessed via a Lemna minor L. Bioassay, through Biotransformation to 3-epi-DON and 3-epi-DOM-1.

    Science.gov (United States)

    Vanhoutte, Ilse; De Mets, Laura; De Boevre, Marthe; Uka, Valdet; Di Mavungu, José Diana; De Saeger, Sarah; De Gelder, Leen; Audenaert, Kris

    2017-02-13

    Mycotoxins are toxic metabolites produced by fungi. To mitigate mycotoxins in food or feed, biotransformation is an emerging technology in which microorganisms degrade toxins into non-toxic metabolites. To monitor deoxynivalenol (DON) biotransformation, analytical tools such as ELISA and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) are typically used. However, these techniques do not give a decisive answer about the remaining toxicity of possible biotransformation products. Hence, a bioassay using Lemna minor L. was developed. A dose-response analysis revealed significant inhibition in the growth of L. minor exposed to DON concentrations of 0.25 mg/L and higher. Concentrations above 1 mg/L were lethal for the plant. This bioassay is far more sensitive than previously described systems. The bioassay was implemented to screen microbial enrichment cultures, originating from rumen fluid, soil, digestate and activated sludge, on their biotransformation and detoxification capability of DON. The enrichment cultures originating from soil and activated sludge were capable of detoxifying and degrading 5 and 50 mg/L DON. In addition, the metabolites 3-epi-DON and the epimer of de-epoxy-DON (3-epi-DOM-1) were found as biotransformation products of both consortia. Our work provides a new valuable tool to screen microbial cultures for their detoxification capacity.

  20. ACCUMULATION OF RECOMBINANT FUSION PROTEIN – SECRETORY ANALOG OF Ag85B AND ESAT6 MYCOBACTERIUM TUBERCULOSIS PROTEINS – IN TRANSGENIC Lemna minor L. PLANTS

    Directory of Open Access Journals (Sweden)

    A.A.Peterson

    2015-10-01

    Full Text Available Determination of the presence of the recombinant fusion protein (ESAT6-Ag85B(ΔTMD-6His and its accumulation level in duckweed plants (Lemna minor L. was the aim of the research. ESAT6 and Ag85B are secretory proteins of Mycobacterium tuberculosis and are considered as potential candidates for development of new vaccine against tuberculosis (TB. Transgenic duckweed plants were obtained previously by Agrobacterium rhizogenes-mediated transformation and possessed fusion gene sequence esxA-fbpBΔTMD. Specific polyclonal antibodies were produced in immunized mice to identify levels of accumulation of TB antigens in plants. Recombinant antigen used for mice immunization was obtained in our laboratory by expression in E. coli. Western blot analysis revealed the recombinant tuberculosis antigen ESAT6-Ag85B(ΔTMD-6His in extracts from transgenic L. minor plants. The level of accumulation of the protein corresponds to 0.4-0.5 µg protein per 1 g of fresh weight of plant. Additionally, the accumulation of recombinant protein was investigated in lyophilized transgenic plants after 1.5 year storage. Duckweed plants accumulating a recombinant analogue of M. tuberculosis secretory proteins can be used for development of plant-based edible vaccines.

  1. Biodiversity and Importance of Floating Weeds of Dara Ismail, Khan ...

    African Journals Online (AJOL)

    These plants include Bryophytes: 1 species, Ricciocarpus natans (L.) Corda; Pteridophytes: 2 species, Azolla pinnata R.Br. and Marselia quadrifolia L., and Spermatophytes: 8 species, Lemna aequinoctialis Welw., L. gibba L., Marselia quadrifoliata L. Nelumbo nucifera Gaerth., Nymphoides cristata (Roxb.) O. Ketze.

  2. Experimental analysis of the competition between algae and duckweed

    NARCIS (Netherlands)

    Roijackers, R.M.M.; Szabo, S.; Scheffer, M.

    2004-01-01

    We performed indoor competition experiments between algae and Lemna gibba L. in order to unravel mechanisms of competition. To separate effects of shading and physical interference from nutrient competition we grew the two groups physically separated while sharing the same water. A multifactorial

  3. The strength of limiting factors for duckweed during algal competition

    NARCIS (Netherlands)

    Szabo, S.; Roijackers, R.M.M.; Scheffer, M.; Borics, G.

    2005-01-01

    Duckweed (Lemna gibba) growth was found to be strongly reduced by unicellular green algae (Scenedesmus conspicua, Chlorella sp., Chlamydomonas sp.) in indoor experiments. These algae reduced N, P, Fe and Mn concentrations of the medium drastically, moreover they increased the pH beyond 10.

  4. Fitorremediación mediante el uso de dos especies vegetales Lemna minor (Lenteja de agua), y Eichornia crassipes (Jacinto de agua) en aguas residuales producto de la actividad minera

    OpenAIRE

    Jaramillo Jumbo, Mariuxi Del Cisne; Flores Campoverde, Edison Darío

    2012-01-01

    La contaminación del agua con metales pesados es un problema de gran importancia, aunque existen varios métodos convencionales para su remoción estos son muy costosos por lo que la fitorremediación es una alternativa que utiliza plantas para reducir la concentración de dichos contaminantes. En este trabajo se determinó la capacidad de absorción del mercurio mediante el uso de las macrófitas acuáticas Eichornia crassipes y Lemna minor en diferentes condiciones experimentales. A las macrófit...

  5. Assessment of Lemna minor (duckweed) and Corbicula fluminea (freshwater clam) as potential indicators of contaminated aquatic ecosystems: responses to presence of psychoactive drug mixtures.

    Science.gov (United States)

    Mohamed, Bourioug; Jean-Yves, Mazzitelli; Pierre, Marty; Hélène, Budzinski; Aleya, Lotfi; Elsa, Bonnafé; Florence, Geret

    2017-01-31

    The pharmaceutical products are emerging pollutants continuously released into the environment, because they cannot be effectively removed by the wastewater treatment plants. In recent years, questions have been raised concerning the environmental risks related to these pollutants. The goal of this research was to evaluate the responses in Lemna minor after 7 days and in Corbicula fluminea after differing durations (1, 3, 7, and 19 days) of exposure to the psychoactive drug mixture (valproic acid, citalopram, carbamazepine, cyamemazine, hydroxyzine, oxazepam, norfluoxetine, lorazepam, fluoxetine, and sertraline) in different concentrations (0, 0 + ethanol, drug concentration (DC) 1 = river water concentration, DC2 = effluent concentration, and DC3 = 10× effluent concentration). In this aim, growth parameters of L. minor, gluthathione S-transferase (GSTs), catalase (CAT), ethoxyresorufin-O-deethylase (EROD) and/or gene expressions (pi-gst, cat, cytochrome P450 4 (cyp4), multidrug resistant 1 (mdr1), and superoxide dismutase (sod)) were measured. GST activities increased significantly in L. minor exposed to DC3, but no changes were found in CAT activity. In C. fluminea, EROD activity was induced significantly in both gill and digestive gland tissues after 3 days' exposure to DC3, while a GST increase was observed only in digestive gland tissues, suggesting that these pharmaceuticals induced an oxidative effect. Gene expression analysis revealed transient transcriptomic responses of cyp4, sod, and mdr1 under drug concentrations 2 or 3 and no change of expression for the other genes (cat and pi-gst) or condition (environmental drug concentration) tested. Finally, the data reported in this study represent important ecotoxicological information, confirming that this enzyme family (cyp4, sod, and mdr1) may be considered as a sensible and early indicator of exposure to drugs and emphasizing the involvement of selected genes in detoxification pathways.

  6. Effect of zinc and lead on the physiological and biochemical properties of aquatic plant Lemna minor: its potential role in phytoremediation

    Science.gov (United States)

    Jayasri, M. A.; Suthindhiran, K.

    2017-06-01

    Plants have gained importance in situ bioremediation of heavy metals. In the present study, different concentrations of zinc (Zn2+) (0.5, 5, 10, 15, 20 mg/l) and lead (Pb2+) (1, 2, 4, 6, 8 mg/l) were used to evaluate metal tolerance level of Lemna minor. L.minor were exposed to metals for 4 days and tested for its dry to fresh weight ratio (DW/FW), photosynthetic pigments production and protein content. The oxidative damage was detected by measuring catalase activity. L.minor showed tolerance against Zn2+ and Pb2+ at a concentration of 10 and 4 mg/l, respectively. Among the metals, Pb2+ showed a significant toxicity at 8 mg/l. High concentration (20 mg/l of Zn2+ and 8 mg/l of Pb2+) of the metals displayed a considerable negative effect on soluble proteins (13 fold decrease with Zn2+ and 4 fold decrease with Pb2+) and photosynthetic pigments (twofold decrease with Zn2+ and onefold decrease with Pb2+) and lead to a consequent reduction in number of fronds. Further, the catalase was greatly increased (twofold decrease with Zn2+ and sixfold decrease with Pb2+) under metal stress. The results indicate that L.minor withstands Zn2+ and Pb2+ toxicity up to the concentration of 10 and 4 mg/l, respectively. Hence, the metal tolerant property of this plant shall be exploited for bioremediation of Zinc and Lead in polluted water. Further, the detailed and wide range of heavy metal toxicity studies should be done to reveal the possible use of this plant on large scale bioremediation purpose.

  7. Toxicidade aguda e risco ambiental do antibiótico oxitetraciclina para tilápia ( Oreochromis niloticus , Daphnia magna e Lemna minor

    Directory of Open Access Journals (Sweden)

    A.A. Machado

    Full Text Available RESUMO O objetivo deste estudo foi classificar o antibiótico Terramicina(r de acordo com a toxicidade aguda e o risco de intoxicação ambiental para Oreochromis niloticus, Daphnia magna e Lemna minor, com base no seu ingrediente ativo oxitetraciclina (OTC. Além disso, observou-se a ocorrência de sinais de intoxicação aguda em peixes e o efeito da diluição do antibiótico sobre as variáveis de qualidade de água. Alevinos, neonatos e frondes foram expostos a concentrações de OTC. De acordo com os resultados dos testes de toxicidade aguda, a Terramicina(r foi classificada pela toxicidade aguda e pelo risco de intoxicação ambiental. Para O. niloticus, a CL(I50; 48h calculada foi de 6,92 mg L-1, para D. magna a CE(I50; 48h foi de 0,17mg.L-1, enquanto para L. minor a CI(I50;7d foi de 0,68 mg L-1. A Terramicina(r foi classificada como muito tóxica para O. niloticus e extremamente tóxica para D. magna e L. minor e causa risco de intoxicação ambiental para os três organismos testados. Concentrações de 7,5 e 8,0 mg L-1 de OTC reduziram a concentração de oxigênio dissolvido na água. De acordo com este estudo, a Terramicina(r não deve ser utilizada na aquicultura, pois é altamente tóxica e causa risco de intoxicação ambiental aos organismos teste.

  8. Competition between Free-Floating Plants Is Strongly Driven by Previously Experienced Phosphorus Concentrations in the Water Column.

    Directory of Open Access Journals (Sweden)

    Edwin T H M Peeters

    Full Text Available Nutrients can determine the outcome of the competition between different floating plant species. The response of floating plants to current phosphorus levels may be affected by previously experienced phosphorus concentrations because some species have the ability to store excess phosphorus for later use. This might have an impact on their competition. Here, we investigate the effect of previous and actual phosphorus concentrations on the growth rate of free-floating plant species (Azolla filiculoides, Lemna minor/gibba and Ricciocarpus natansand the effect of phosphorus history on the competition between L. minor/gibba and A. filiculoides and between L. minor/gibba and R. natans. As expected, plant growth was lower when previously kept at low instead of high phosphorus concentrations. Growth of L. minor/gibba and A. filiculoides with a phosphorus rich history was comparable for low and high actual phosphorus concentrations, however, internal phosphorus concentrations were significantly lower with low actual phosphorus concentration. This indicates that both species perform luxury phosphorus uptake. Furthermore, internal P concentration in Azolla and Lemna increased within two weeks after a period of P deficit without a strong increase in growth. A. filiculoides in a mixture with L. minor/gibba grew faster than its monoculture. Morphological differences may explain why A. filiculoides outcompeted L. minor/gibba and these differences may be induced by phosphorus concentrations in the past. Growth of L. minor/gibba was only reduced by the presence of A. filiculoides with a high phosphorus history. Growth of L. minor/gibba and R. natans in mixtures was positively affected only when they had a high phosphorus history themselves and their competitor a low phosphorus history. These observations clearly indicate that phosphorus history of competing plants is important for understanding the outcome of the competition. Therefore, actual and previously

  9. Mineralization of 14C-labelled plant material by Porcellio scaber (Crustacea, Isopoda)

    International Nuclear Information System (INIS)

    Griffiths, B.S.; Wood, S.; Cheshire, M.V.

    1989-01-01

    Leaf litter was incubated in a mineral soil in the presence or absence of mature Porcellio scaber. The invertebrate caused an increase in the numbers of bacteria, ammonifying bacteria, actinomycetes and protozoa in the soil. The decomposition of 14 C-labelled Lemna gibba was significantly increased by the presence of P. scaber as determined by the total label remaining in the soil and the changes in sugars. 14 C-labelled faeces derived from L. gibba decomposed at a slower rate than the plant tissue from which it originated. (author)

  10. Electronics and electronic systems

    CERN Document Server

    Olsen, George H

    1987-01-01

    Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

  11. PRODUCCIÓN DE LA MACRÓFITA ACUÁTICA Lemna perpusilla UTILIZANDO AGUA RESIDUAL DE UNA INSTALACIÓN PORCINA, CON PROPÓSITOS PARA PRODUCCIÓN DE BIOMASA PARA ACUACULTURA

    Directory of Open Access Journals (Sweden)

    Pablos Reyes DP

    2011-01-01

    Full Text Available Una problemática ambiental impor- tante en instalaciones porcinas es la producción de excretas con alta concentración de nutrientes y su deposición en el ecosistema. Una alternativa para la biorremediación de dicha problemática es utilizar las excretas para la producción de plantas acuáticas que tengan una alta tasa de captación de nutrientes, tal como Lemna perpusilla. En el presente estudio se desarrollaron dos experimentos con el objetivo de estudiar el efecto de la época del año y el tiempo de cosecha sobre la biomasa, composición química y el rendimiento de nutrientes. En el experimento I (enero a abril se utilizó una dosis de fertilización de 20 Lm-2 por cada 20 días y se manejó una densidad de siembra de 200 gm-2, realizando cosechas cada 10 días. Mientras que en el experimento II (mayo a ju- nio se utilizó la misma dosis de fertilización y densidad de siembra, pero cosechando cada seis días. Durante el desarrollo experimental (enero-junio Lemna perpusilla presentó bajo contenido de materia seca (6.87 a 8.87% y fi- bra (11.67 a 12.89%, pero alto contenido de proteína (26.02 a 27.41%. Se determinó que la época y tiempo de cosecha afectan significati- vamente la cosecha total, composición química y rendimiento de nutrientes. Las variables cli- máticas que más influyeron sobre la cosecha total fueron las horas luz y precipitación. Mien- tras que el rendimiento en nutrientes es princi- palmente afectada por la temperatura, hume- dad relativa, horas luz y precipitación.

  12. Electronic Cigarettes

    Science.gov (United States)

    ... New FDA Regulations Text Size: A A A Electronic Cigarettes Electronic cigarettes (e-cigarettes) are battery operated products designed to ... more about: The latest news and events about electronic cigarettes on this FDA page Electronic cigarette basics on ...

  13. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  14. The Electron

    Energy Technology Data Exchange (ETDEWEB)

    Thomson, George

    1972-01-01

    Electrons are elementary particles of atoms that revolve around and outside the nucleus and have a negative charge. This booklet discusses how electrons relate to electricity, some applications of electrons, electrons as waves, electrons in atoms and solids, the electron microscope, among other things.

  15. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  16. Electron radiography

    Science.gov (United States)

    Merrill, Frank E.; Morris, Christopher

    2005-05-17

    A system capable of performing radiography using a beam of electrons. Diffuser means receive a beam of electrons and diffuse the electrons before they enter first matching quadrupoles where the diffused electrons are focused prior to the diffused electrons entering an object. First imaging quadrupoles receive the focused diffused electrons after the focused diffused electrons have been scattered by the object for focusing the scattered electrons. Collimator means receive the scattered electrons and remove scattered electrons that have scattered to large angles. Second imaging quadrupoles receive the collimated scattered electrons and refocus the collimated scattered electrons and map the focused collimated scattered electrons to transverse locations on an image plane representative of the electrons' positions in the object.

  17. The fate of the herbicide propanil in plants of the littoral zone of the Three Gorges Reservoir (TGR), China.

    Science.gov (United States)

    Chen, Zhongli; Schäffer, Andreas

    2016-10-01

    The anti-seasonal hydrology with 30m water fluctuations in the Three Gorges Reservoir (TGR) of China attracts growing environmental and ecological concerns. We investigated the biotransformation of the herbicide propanil in plants dominating in the littoral zone of the TGR by applying the 14 C-ring-labeled herbicide into non-aseptic hydroponic plant systems (Cynodon dactylon, Nelumbo nucifera and Bidens pilosa), aseptic plants (Lemna minor and Lemna gibba) and cell suspension cultures (C. dactylon and L. minor). (1) Propanil absorbed in plants of the hydroponic systems was (12.46±1.63)% of applied radioactivity (AR) (C. dactylon), (52.36±6.38)% (N. nucifera) and (76.55±6.07)% (B. pilosa), respectively. The 14 C-residues in the plant extractable fractions and the corresponding media were confirmed by radio-Thin Layer Chromatography (TLC), radio-High Performance Liquid Chromatography (HPLC) and Gas Chromatography-Electron Ionization Mass Spectrometry (GC-EIMS) as propanil, 3,4-dichloroaniline (DCA) and N-(3,4-dichlorophenyl)-β-d-glucopyranosylamine (Glu-DCA). (2) About 8% of AR was taken up by both aseptic plants, from which 7.0% of AR was extracted and identified also as propanil, DCA and Glu-DCA. (3) Concerning cell suspension cultures, (39.22±9.39)% of AR was absorbed by C. dactylon after 72hr, whereas the accumulated 14 C-propanil by L. minor cell suspension culture amounted to (65.04±1.72)% after 7days. The identified compounds in cell cultures are consistent with those in the tested plants. Most of the pesticide residues in the intact plants were un-extractable, which are recognized as the end of the detoxification process. We therefore consider these plants as suitable for the phytoremediation of the herbicide propanil in the TGR region. Copyright © 2016. Published by Elsevier B.V.

  18. Electron detector

    International Nuclear Information System (INIS)

    Hashimoto, H.; Mogami, A.

    1975-01-01

    A device for measuring electron densities at a given energy level in an electron beam or the like having strong background noise, for example, in the detection of Auger electric energy spectrums is described. An electron analyzer passes electrons at the given energy level and at the same time electrons of at least one adjacent energy level. Detecting means associated therewith produce signals indicative of the densities of the electrons at each energy level and combine these signals to produce a signal indicative of the density of the electrons of the given energy level absent background noise

  19. Electron/electron acoustic instability

    International Nuclear Information System (INIS)

    Gary, S.P.

    1987-01-01

    The electron acoustic wave becomes a normal mode of an unmagnetized collisionless plasma in the presence of two electron components with similar densities, but strongly disparate temperatures. The characteristic frequency of this mode is the plasma frequency of the cooler electron component. If these two electron components have a relative drift speed several times the thermal speed of the cooler component, the electron/electron acoustic instability may arise. This paper describes the parametric dependences of the threshold drift speed and maximum growth rate of this instability, and compares these with the same properties of the electron/ion acoustic instability. Under the condition of zero current, the electron/ion acoustic instability typically has the lower threshold drift speed, so that observation of the electron/electron acoustic instability is a strong indication of the presence of an electrical current in the plasma

  20. Electron Microscopy.

    Science.gov (United States)

    Beer, Michael

    1980-01-01

    Reviews technical aspects of structure determination in biological electron microscopy (EM). Discusses low dose EM, low temperature microscopy, electron energy loss spectra, determination of mass or molecular weight, and EM of labeled systems. Cites 34 references. (CS)

  1. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  2. Understand electronics

    CERN Document Server

    Bishop, Owen

    2013-01-01

    Understand Electronics provides a readable introduction to the exciting world of electronics for the student or enthusiast with little previous knowledge. The subject is treated with the minimum of mathematics and the book is extensively illustrated.This is an essential guide for the newcomer to electronics, and replaces the author's best-selling Beginner's Guide to Electronics.The step-by-step approach makes this book ideal for introductory courses such as the Intermediate GNVQ.

  3. Vacuum electronics

    CERN Document Server

    Eichmeier, Joseph A

    2008-01-01

    Nineteen experts from the electronics industry, research institutes and universities have joined forces to prepare this book. ""Vacuum Electronics"" covers the electrophysical fundamentals, the present state of the art and applications, as well as the future prospects of microwave tubes and systems, optoelectronics vacuum devices, electron and ion beam devices, light and X-ray emitters, particle accelerators and vacuum interrupters. These topics are supplemented by useful information about the materials and technologies of vacuum electronics and vacuum technology.

  4. Electronic Commerce

    OpenAIRE

    Slavko Đerić

    2016-01-01

    Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks...

  5. Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1989-01-01

    Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

  6. ELECTRONIC SIGNATURES

    African Journals Online (AJOL)

    10332324

    (a) facilitate ecommerce;2. (b) remove and prevent barriers to electronic communications in South Africa;3. (c) ensure that electronic transactions in the Republic conform to the highest international standards;4. (d) promote the development of electronic transactions services which are responsive to the needs of users and ...

  7. Basic electronics

    CERN Document Server

    Holbrook, Harold D

    1971-01-01

    Basic Electronics is an elementary text designed for basic instruction in electricity and electronics. It gives emphasis on electronic emission and the vacuum tube and shows transistor circuits in parallel with electron tube circuits. This book also demonstrates how the transistor merely replaces the tube, with proper change of circuit constants as required. Many problems are presented at the end of each chapter. This book is comprised of 17 chapters and opens with an overview of electron theory, followed by a discussion on resistance, inductance, and capacitance, along with their effects on t

  8. Sticker electronics

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-09-08

    Electronic stickers may be manufactured on flexible substrates (110, 120, 130) as layers and packaged together. The package may then have an adhesive applied to one side to provide capability for sticking the electronic devices to surfaces. The stickers can be wrappable, placed on surfaces, glued on walls or mirrors or wood or stone, and have electronics (112, 122, 132) which may or may not be ultrathin. Packaging for the electronic sticker can use polymer on cellulose manufacturing and/or three dimensional (3-D) printing. The electronic stickers may provide lighting capability, sensing capability, and/or recharging capabilities.

  9. Electron Tree

    DEFF Research Database (Denmark)

    Appelt, Ane L; Rønde, Heidi S

    2013-01-01

    The photo shows a close-up of a Lichtenberg figure – popularly called an “electron tree” – produced in a cylinder of polymethyl methacrylate (PMMA). Electron trees are created by irradiating a suitable insulating material, in this case PMMA, with an intense high energy electron beam. Upon discharge......, during dielectric breakdown in the material, the electrons generate branching chains of fractures on leaving the PMMA, producing the tree pattern seen. To be able to create electron trees with a clinical linear accelerator, one needs to access the primary electron beam used for photon treatments. We...... appropriated a linac that was being decommissioned in our department and dismantled the head to circumvent the target and ion chambers. This is one of 24 electron trees produced before we had to stop the fun and allow the rest of the accelerator to be disassembled....

  10. The electron and the electronics

    International Nuclear Information System (INIS)

    Sanchez Balmaseda, M.

    1997-01-01

    The aim of this work is to present a brief report of those historical events that originated and contributed to the scientific area of Electronics. The main discovering and investigations in both Vacuum Electronics and Semiconductor Electronics are reviewed. (Author) 12 refs

  11. Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Slavko Đerić

    2016-12-01

    Full Text Available Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks, including the Internet. Electronic commerce is not limited just to buying and selling, but it also includes all pre-sales and after-sales ongoing activities along the supply chain. Introducing electronic commerce, using the Internet and Web services in business, realizes the way to a completely new type of economy - internet economy.

  12. Electron spectroscopy

    International Nuclear Information System (INIS)

    Hegde, M.S.

    1979-01-01

    An introduction to the various techniques in electron spectroscopy is presented. These techniques include: (1) UV Photoelectron spectroscopy, (2) X-ray Photoelectron spectroscopy, (3) Auger electron spectroscopy, (4) Electron energy loss spectroscopy, (5) Penning ionization spectroscopy and (6) Ion neutralization spectroscopy. The radiations used in each technique, the basis of the technique and the special information obtained in structure determination in atoms and molecules by each technique are summarised. (A.K.)

  13. Polymer electronics

    CERN Document Server

    Hsin-Fei, Meng

    2013-01-01

    Polymer semiconductor is the only semiconductor that can be processed in solution. Electronics made by these flexible materials have many advantages such as large-area solution process, low cost, and high performance. Researchers and companies are increasingly dedicating time and money in polymer electronics. This book focuses on the fundamental materials and device physics of polymer electronics. It describes polymer light-emitting diodes, polymer field-effect transistors, organic vertical transistors, polymer solar cells, and many applications based on polymer electronics. The book also disc

  14. Electron Bifurcation

    Energy Technology Data Exchange (ETDEWEB)

    Peters, John W.; Miller, Anne-Frances; Jones, Anne K.; King, Paul W.; Adams, Michael W. W.

    2016-04-01

    Electron bifurcation is the recently recognized third mechanism of biological energy conservation. It simultaneously couples exergonic and endergonic oxidation-reduction reactions to circumvent thermodynamic barriers and minimize free energy loss. Little is known about the details of how electron bifurcating enzymes function, but specifics are beginning to emerge for several bifurcating enzymes. To date, those characterized contain a collection of redox cofactors including flavins and iron-sulfur clusters. Here we discuss the current understanding of bifurcating enzymes and the mechanistic features required to reversibly partition multiple electrons from a single redox site into exergonic and endergonic electron transfer paths.

  15. Microfluidic electronics.

    Science.gov (United States)

    Cheng, Shi; Wu, Zhigang

    2012-08-21

    Microfluidics, a field that has been well-established for several decades, has seen extensive applications in the areas of biology, chemistry, and medicine. However, it might be very hard to imagine how such soft microfluidic devices would be used in other areas, such as electronics, in which stiff, solid metals, insulators, and semiconductors have previously dominated. Very recently, things have radically changed. Taking advantage of native properties of microfluidics, advances in microfluidics-based electronics have shown great potential in numerous new appealing applications, e.g. bio-inspired devices, body-worn healthcare and medical sensing systems, and ergonomic units, in which conventional rigid, bulky electronics are facing insurmountable obstacles to fulfil the demand on comfortable user experience. Not only would the birth of microfluidic electronics contribute to both the microfluidics and electronics fields, but it may also shape the future of our daily life. Nevertheless, microfluidic electronics are still at a very early stage, and significant efforts in research and development are needed to advance this emerging field. The intention of this article is to review recent research outcomes in the field of microfluidic electronics, and address current technical challenges and issues. The outlook of future development in microfluidic electronic devices and systems, as well as new fabrication techniques, is also discussed. Moreover, the authors would like to inspire both the microfluidics and electronics communities to further exploit this newly-established field.

  16. Electronics Industry

    National Research Council Canada - National Science Library

    Bell, Robert; Carroll-Garrison, Martina; Donovan, Daniel; Fisher, John; Guemmer, Paul; Harms, Robert; Kelly, Timothy; Love, Mattie; McReynolds, James; Ward, Ralph

    2006-01-01

    .... Government action to preserve strategic access to semiconductor producers is clearly needed to ensure DoD electronic systems can be built without compromising sensitive technology, though every...

  17. Isolated electrons

    Energy Technology Data Exchange (ETDEWEB)

    Ekstrom, Ph.; Winwland, D.

    1981-08-01

    The problem of electron g-factor measurement by means of an isolated electron is considered. The technique of the experiment performed at the Washington university is described. A single electron is enclosed in a homogeneous magnetic field which is superimposed by an electric field. The electric field configuration represents a Penning trap. The trap together with the enclosed electron forms an ''atom'' of macroscopic dimensions. The electron trajectory in the trap consists of three components. The electron quickly rotates over small loops (cyclotron motion), the centre of these loops slowly moves over a large circle (magistron motion). Meanwhile the electron oscillates back and forth along the trap axis. The electron motion in the atom field is quantized and the transitions between various types of motions correspond to definite radiation frequencies. At the anomal frequency the transition with spin flip is registered and the electron g-factor is measured. The value g=2.0023193044 is obtained with a probable error less than a unit of the last decimal digit.

  18. The electron

    International Nuclear Information System (INIS)

    Hestenes, David; Weingartshofer, Antonio

    1991-01-01

    The stupendous successes of the Dirac equation and quantum electro-dynamics have established the electron as the best understood of the fundamental constituents of matter. Nevertheless, physicists agree that the electron still has secrets to reveal. Moreover, powerful new theoretical and experimental tools for probing those secrets have been sharpened during the last decade. This workshop was organized to bring theorists and experimentalists together to discuss their common goal of knowing the electron. Present state and future prospects for progress toward that goal are here described. The theoretical papers encompass a wide range of views on the electron. Several argue that the 'Zitter-bewegung' is more than a mathematical peculiarity of the Dirac equation, that it may well be a real physical phenomenon and worthy of serious study, theoretically and experimentally. Besides generating the electron spin and magnetic moment, the 'Zitterbewegung' may be a vital clue to electron structure and self-interaction. Some of the papers employ a radical new formulation of the Dirac theory which reveals a hidden geo-metric structure in the theory that supports a 'Zitterbewegung' inter-pretation. For the last half century the properties of electrons have been probed primarily by scattering experiments at ever higher energies. Recently, however, two powerful new experimental techniques have emerged capable of giving alternative experimental views of the electron. First, techniques for confining single electrons for long term study have led to the most accurate measurements of the electron magnetic moment. Second, the interaction of high intensity laser fields with atoms and electrons have revealed striking new phenomena such as multiphoton ionization. refs.; figs.; tabs

  19. Electronic marketplaces

    OpenAIRE

    TALAFOUSOVÁ, Jana

    2011-01-01

    This thesis describes the principles of electronic and Internet marketplaces. For analyzing the status of the use of electronic marketplaces and online polling was done with the actual marketplace and society, which is a member of the marketplace. Proposal that trade through the market is prepared for a particular company, which previously traded through the marketplace.

  20. Printed Electronics

    Science.gov (United States)

    Crain, John M. (Inventor); Lettow, John S. (Inventor); Aksay, Ilhan A. (Inventor); Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2016-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  1. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    reference material for power electronics engineers, students and academicians. We thank the editors of Sadhana for inviting us to guest-edit this special issue on power electronics. July 2017. KISHORE CHATTERJEE. Department of Electrical Engineering,. Indian Institute of Technology,. Bombay, Powai, Mumbai 400076, ...

  2. Electronic Commerce and Electronic Business

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    This special issue is motivated by the recent upsurge of research activity in the areas of electronic commerce and electronic business both in India and all over the world. The current research activity is quite intensive in the use of mathematical tools such as cryptography, game theory, mechanism design, optimization, ...

  3. Electronic identity

    CERN Document Server

    de Andrade, Norberto Nuno Gomes; Argles, David

    2014-01-01

    With the increasing availability of electronic services, security and a reliable means by which identity is verified is essential.Written by Norberto Andrade the first chapter of this book provides an overview of the main legal and regulatory aspects regarding electronic identity in Europe and assesses the importance of electronic identity for administration (public), business (private) and, above all, citizens. It also highlights the role of eID as a key enabler of the economy.In the second chapter Lisha Chen-Wilson, David Argles, Michele Schiano di Zenise and Gary Wills discuss the user-cent

  4. Electronic diagrams

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Diagrams is a ready reference and general guide to systems and circuit planning and in the preparation of diagrams for both newcomers and the more experienced. This book presents guidelines and logical procedures that the reader can follow and then be equipped to tackle large complex diagrams by recognition of characteristic 'building blocks' or 'black boxes'. The goal is to break down many of the barriers that often seem to deter students and laymen in learning the art of electronics, especially when they take up electronics as a spare time occupation. This text is comprised of nin

  5. Digital electronics

    CERN Document Server

    Morris, John

    2013-01-01

    An essential companion to John C Morris's 'Analogue Electronics', this clear and accessible text is designed for electronics students, teachers and enthusiasts who already have a basic understanding of electronics, and who wish to develop their knowledge of digital techniques and applications. Employing a discovery-based approach, the author covers fundamental theory before going on to develop an appreciation of logic networks, integrated circuit applications and analogue-digital conversion. A section on digital fault finding and useful ic data sheets completes th

  6. Starting electronics

    CERN Document Server

    Brindley, Keith

    2005-01-01

    Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

  7. Polymer electronics

    CERN Document Server

    Geoghegan, Mark

    2013-01-01

    Polymer electronics is the science behind many important new developments in technology, such as the flexible electronic display (e-ink) and many new developments in transistor technology. Solar cells, light-emitting diodes, and transistors are all areas where plastic electronics is likely to, or is already having, a serious impact on our daily lives. With polymer transistors and light-emitting diodes now being commercialised, there is a clear need for a pedagogic text thatdiscusses the subject in a clear and concise fashion suitable for senior undergraduate and graduate students. The content

  8. Stretchable electronics

    CERN Document Server

    Someya, Takao

    2012-01-01

    With its comprehensive coverage this handbook and ready reference brings together some of the most outstanding scientists in the field to lay down the undisputed knowledge on how to make electronics stretchable.As such, it focuses on gathering and evaluating the materials, designs, models and technologies that enable the fabrication of fully elastic electronic devices which can sustain high strain. Furthermore, it provides a review of those specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices and sensors. In addition to stre

  9. Electronic Elections

    DEFF Research Database (Denmark)

    Schürmann, Carsten

    2009-01-01

    Electronic voting technology is a two edged sword. It comes with many risks but brings also many benefits. Instead of flat out rejecting the technology as uncontrollably dangerous, we advocate in this paper a different technological angle that renders electronic elections trustworthy beyond...... the usual levels of doubt. We exploit the trust that voters currently have into the democratic process and model our techniques around that observation accordingly. In particular, we propose a technique of trace emitting computations to record the individual steps of an electronic voting machine...... for a posteriori validation on an acceptably small trusted computing base. Our technology enables us to prove that an electronic elections preserves the voter’s intent, assuming that the voting machine and the trace verifier are independent....

  10. Electron Scattering

    International Nuclear Information System (INIS)

    Li, Xiaodong; Lee, Kyong Sei; Shaw, J.J.; Bahri, C.

    1990-01-01

    Electron scattering is one of the best probes available to us to probe the nucleus. It has revealed to us, with unprecedented accuracy, the charge and current distributions of nuclei. It has provided us with positive evidence for meson exchange currents. It was used to 'discover' the quark and it revealed to us that nucleons may be modified in the nuclear environment (EMC Effect). In short, electron scattering has revolutionized the study of nuclear physics. Several recent developments will insure that electron beams which will soon become availabe at CEBAF, Bates and elsewhere will make high-precision coincidence experiments possible. As the technology is becoming available, we are just beginning to exploit polarization degrees of freedom in our experiments. In this paper, we will introduce the formalism of electron scattering, review what we have learned in the past and look ahead toward the future

  11. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  12. Paper electronics.

    Science.gov (United States)

    Tobjörk, Daniel; Österbacka, Ronald

    2011-05-03

    Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Electronic plants

    Science.gov (United States)

    Stavrinidou, Eleni; Gabrielsson, Roger; Gomez, Eliot; Crispin, Xavier; Nilsson, Ove; Simon, Daniel T.; Berggren, Magnus

    2015-01-01

    The roots, stems, leaves, and vascular circuitry of higher plants are responsible for conveying the chemical signals that regulate growth and functions. From a certain perspective, these features are analogous to the contacts, interconnections, devices, and wires of discrete and integrated electronic circuits. Although many attempts have been made to augment plant function with electroactive materials, plants’ “circuitry” has never been directly merged with electronics. We report analog and digital organic electronic circuits and devices manufactured in living plants. The four key components of a circuit have been achieved using the xylem, leaves, veins, and signals of the plant as the template and integral part of the circuit elements and functions. With integrated and distributed electronics in plants, one can envisage a range of applications including precision recording and regulation of physiology, energy harvesting from photosynthesis, and alternatives to genetic modification for plant optimization. PMID:26702448

  14. Electron Emitters

    National Research Council Canada - National Science Library

    Tzeng, Yonhua

    2002-01-01

    When two carbon-nanotube coated electrodes are placed at a small distance from each other, electron emission from carbon nanotubes allows a DC or AC electrical current to flow between these two electrodes...

  15. Electron Microprobe

    Data.gov (United States)

    Federal Laboratory Consortium — The JEOL JXA-8600 is a conventional hairpin filament thermal emission electron microprobe that is more than 20 years old. It is capable of performing qualitative and...

  16. Electronic spectroscopies

    OpenAIRE

    Weckhuysen, B.M.; Schoonheydt, R.A.

    2000-01-01

    Diffuse reflectance spectroscopy (DRS) in the ultraviolet, visible and near-infrared region is a versatile spectroscopic technique, as both d-d and charge transfer transitions of supported TMI can be probed. One of the advantages of electronic spectroscopy is that the obtained information is directly chemical since the outer shell electrons of the TMI are probed and provide information about the oxidation state and coordination environment of TMI on surfaces. Furthermore, the DRS technique ca...

  17. Electronic commerce

    OpenAIRE

    Zvolánková, Pavla

    2010-01-01

    The thesis deals with a description of electronic commerce from its beginning up to present situation in this area. It explains basic terms connected with electronic commerce and it summarizes the relevant legislation. Moreover it describes e-contracts and rights and duties of both contractual parties. The main view is the view of Internet retailer, which is reflected in the practical part focused on concrete problems of retailers.

  18. Spin Electronics

    Science.gov (United States)

    2003-08-01

    applications, a ferromagnetic metal may be used as a source of spin-polarized electronics to be injected into a semiconductor, a superconductor or a...physical phenomena in II-VI and III-V semiconductors. In II-VI systems, the Mn2+ ions act to boost the electron spin precession up to terahertz ...conductors, proximity effect between ferromagnets and superconductors , and the effects of spin injection on the physical properties of the

  19. Spin electronics

    CERN Document Server

    Buhrman, Robert; Daughton, James; Molnár, Stephan; Roukes, Michael

    2004-01-01

    This report is a comparative review of spin electronics ("spintronics") research and development activities in the United States, Japan, and Western Europe conducted by a panel of leading U.S. experts in the field. It covers materials, fabrication and characterization of magnetic nanostructures, magnetism and spin control in magnetic nanostructures, magneto-optical properties of semiconductors, and magnetoelectronics and devices. The panel's conclusions are based on a literature review and a series of site visits to leading spin electronics research centers in Japan and Western Europe. The panel found that Japan is clearly the world leader in new material synthesis and characterization; it is also a leader in magneto-optical properties of semiconductor devices. Europe is strong in theory pertaining to spin electronics, including injection device structures such as tunneling devices, and band structure predictions of materials properties, and in development of magnetic semiconductors and semiconductor heterost...

  20. Electronic Commerce

    Energy Technology Data Exchange (ETDEWEB)

    Laird, N. [NRG Information Services Inc., Calgary, AB (Canada)

    1995-11-01

    The concept of electronic commerce in the gas industry was discussed. It was defined as the integration of communication technology, advanced information processing capability and business standards, to improve effectiveness of the business process. Examples of electronic data interchange from the automotive, airline, and banking industry were given. The objective of using this technology in the gas industry was described as the provision of one electronic facility to make seamless contractual and operational arrangements for moving natural gas across participating pipelines. The benefit of seamless integration - one readily available standard system used by several companies - was highlighted. A list of value-added services such as the free movement of bulletins, directories, nominations,and other documents was provided.

  1. Electronic spectroscopies

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Schoonheydt, R.A.

    2000-01-01

    Diffuse reflectance spectroscopy (DRS) in the ultraviolet, visible and near-infrared region is a versatile spectroscopic technique, as both d-d and charge transfer transitions of supported TMI can be probed. One of the advantages of electronic spectroscopy is that the obtained information is

  2. Greening Electronics

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Søes Kokborg, Morten; Thomsen, Marianne

    Based on a literature review with focus on hazardous substances in waste electric and electronic equipment (WEEE) and numbers from a Danish treatment facility a flow analysis for specific substances has been conducted. Further, the accessible knowledge on human and environmental effects due to po...

  3. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e...

  4. Electronic Commerce

    Indian Academy of Sciences (India)

    2000-11-30

    Nov 30, 2000 ... applications of internet are exchange of electronic mail, ex- change of files (text as well as multimedia), storing information in a form which allows other computers connected to the internet to access it and remote logging into a computer and using it to run programs. For two computers in different locations to.

  5. Electronic Commerce

    Indian Academy of Sciences (India)

    Electronic commerce usually uses a public switched telephone network (PSTN) and is often between entities which are not known to one another. Ensuring security of communication between the entities participating in e-commerce is hence an important requirement. Apart from ensuring the security of messages on the ...

  6. Nuclear electronics

    International Nuclear Information System (INIS)

    Friese, T.

    1981-09-01

    A short survey is given on nuclear radiation detectors and nuclear electronics. It is written for newcomers and those, who are not very familiar with this technique. Some additional information is given on typical failures in nuclear measurement systems. (orig.) [de

  7. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    Power electronics plays an important role in the processing, conditioning and utilization of electric power. From ubiquitous ... An induction motor drive based on a modular multilevel converter (MMC) is presented ... dynamic voltage restorer and the control of an induction motor drive having an active front end converter.

  8. Electronic Money.

    Science.gov (United States)

    Schilling, Tim

    Thirty years ago a cashless society was predicted for the near future; paper currency and checks would be an antiquated symbol of the past. Consumers would embrace a new alternative for making payments: electronic money. But currency is still used for 87% of payments, mainly for "nickel and dime" purchases. And checks are the payment…

  9. Electronics department

    International Nuclear Information System (INIS)

    1979-01-01

    This report summarizes the activities in 1978 of some of the groups within the Electronics Department. The work covered includes plant protection and operator studies, reliability techniques, application of nuclear techniques to mineral exploration, applied laser physics, computing and, lastly, research instrumentation. (author)

  10. Electronic Commerce

    Indian Academy of Sciences (India)

    nance, Vol.6, No.2, 6-13, 2001. SERIES I ARTICLE. Electronic Commerce. 5. Cash Transactions. V Rajaraman. In this article we will discuss payment by cash for e-com- merce transactions and micro payments for services re- ceived via the internet. Introduction. In the previous part, we discussed payment by credit cards and.

  11. Cryogenic electronics

    Energy Technology Data Exchange (ETDEWEB)

    Fourches, N.; Abbon, P.; Delagnes, E.; Le Meur, L.P.

    1995-04-01

    This study presents the cryogenic electronics, which is used in high energy physics with appropriate device. It discuss their ability to hardening against ionization radiation and neutrons. Some partial results on the operation of microelectronics devices at cryogenic temperature are given. (TEC). 33 refs., 13 figs.

  12. Electronic Commerce

    Indian Academy of Sciences (India)

    2000-11-30

    Nov 30, 2000 ... Electronic Commerce. 2. E-Commerce System Architecture. V Rajaraman is with the. J awaharlal Nehru Centre for Advanced Scientific. Research and the Indian. Institute of Science,. Bangalore. Several generations of scientists and engineers in India have learnt computer science using his lucidly.

  13. Electronic Commerce

    Indian Academy of Sciences (India)

    In the first part of this series we stated that in business to business e-commerce, electronic documents are exchanged be- tween business partners by using either a private network or a public switched network. We also stated that in order to inter- pret them correctly we need a standard notation which is agreed to by both ...

  14. Electronic detectors for electron microscopy.

    Science.gov (United States)

    Faruqi, A R; McMullan, G

    2011-08-01

    Electron microscopy (EM) is an important tool for high-resolution structure determination in applications ranging from condensed matter to biology. Electronic detectors are now used in most applications in EM as they offer convenience and immediate feedback that is not possible with film or image plates. The earliest forms of electronic detector used routinely in transmission electron microscopy (TEM) were charge coupled devices (CCDs) and for many applications these remain perfectly adequate. There are however applications, such as the study of radiation-sensitive biological samples, where film is still used and improved detectors would be of great value. The emphasis in this review is therefore on detectors for use in such applications. Two of the most promising candidates for improved detection are: monolithic active pixel sensors (MAPS) and hybrid pixel detectors (of which Medipix2 was chosen for this study). From the studies described in this review, a back-thinned MAPS detector appears well suited to replace film in for the study of radiation-sensitive samples at 300 keV, while Medipix2 is suited to use at lower energies and especially in situations with very low count rates. The performance of a detector depends on the energy of electrons to be recorded, which in turn is dependent on the application it is being used for; results are described for a wide range of electron energies ranging from 40 to 300 keV. The basic properties of detectors are discussed in terms of their modulation transfer function (MTF) and detective quantum efficiency (DQE) as a function of spatial frequency.

  15. Molecular Electronics

    DEFF Research Database (Denmark)

    Jennum, Karsten Stein

    This thesis includes the synthesis and characterisation of organic compounds designed for molecular electronics. The synthesised organic molecules are mainly based on two motifs, the obigo(phenyleneethynylenes) (OPE)s and tetrathiafulvalene (TTF) as shown below. These two scaffolds (OPE and TTF......) are chemically merged together to form cruciform-like structures that are an essential part of the thesis. The cruciform molecules were subjected to molecular conductance measurements to explore their capability towards single-crystal field-effect transistors (Part 1), molecular wires, and single electron...... transistors (Part 2). The synthetic protocols rely on stepwise Sonogashira coupling reactions. Conductivity studies on various OPE-based molecular wires reveal that mere OPE compounds have a higher electrical resistance compared to the cruciform based wires (up to 9 times higher). The most spectacular result...

  16. Automotive electronics

    Energy Technology Data Exchange (ETDEWEB)

    Basshuysen, R. van [ed.; Baun, R. [comp.

    2000-10-01

    Electronic equipment is indispensable in modern motor cars for active and passive safety, exhaust and consumption monitoring or comfort. Electric and electronic systems today account for nearly 20 percent of the production cost of a normal passenger car, with an upward trend. Infotainment equipment is a growing market, which gets center stage in this issue. Further subjects discussed are current electronic and mechatronic applications as well as new developments in data transmission, development tools and constructional elements. [German] Ohne Elektronik sind moderne Automobile nicht mehr vorstellbar. Ob aktive oder passive Sicherheit, Abgas, Verbrauch oder Komfort - der Fortschritt im Autombil ist eng verknuepft mit der Einfuehrung neuer elektronischer Systeme und Komponenten. Obwohl meist nicht sehr auffaellig in einer Black-box verpackt, liegen die anteiligen Herstellungskosten fuer die Elektrik und Elektronik bei einem Mittelklassefahrzeug schon bei knapp 20 Prozent. Tendenz: Weiter steigend. Waehrend die Segnungen von ABS, ESP oder Motormanagement fuer den Kunden unsichtbar bleiben, tritt die Elektronik mit den Infotainment-Systemen ins Rampenlicht. Hochwertige Audio-Anlagen im Doppel-DIN-Format und grosse Farbbildschirme sitzen an prominenter Stelle im Armaturenbrett. Elektronische Systeme werden damit fuer den Kunden sichtbar, greifbar und erlebbar. Doch je mehr Funktionen integriert werden, desto wichtiger wird eine einfache Bedienung, die den Fahrer moeglichst wenig vom Verkehrsgeschehen ablenkt. Das ist leider keine Selbstverstaendlichkeit: Eine klare, einfache Bedienung wurde in der Vergangenheit schon bei so manchem simplen Cassetten-Radio schmerzlich vermisst. Infotainment im Automobil ist ein Wachstumsmarkt - und das Schwerpunkt-Thema der vorliegenden zweiten Ausgabe von 'Automotive Electronics'. Darueber hinaus beschaeftigt sich auch diese Ausgabe mit aktuellen Elektronik- und Mechatronik-Anwendungen und berichtet ueber neue Entwicklungen

  17. Electronic Aggression

    Centers for Disease Control (CDC) Podcasts

    2007-11-20

    Aggression is no longer limited to the school yard. New forms of electronic media, such as blogs, instant messaging, chat rooms, email, text messaging, and the internet are providing new arenas for youth violence to occur.  Created: 11/20/2007 by National Center for Injury Prevention and Control, Division of Violence Prevention.   Date Released: 11/28/2007.

  18. ELECTRON GUN

    Science.gov (United States)

    Christofilos, N.C.; Ehlers, K.W.

    1960-04-01

    A pulsed electron gun capable of delivering pulses at voltages of the order of 1 mv and currents of the order of 100 amperes is described. The principal novelty resides in a transformer construction which is disposed in the same vacuum housing as the electron source and accelerating electrode structure of the gun to supply the accelerating potential thereto. The transformer is provided by a plurality of magnetic cores disposed in circumferentially spaced relation and having a plurality of primary windings each inductively coupled to a different one of the cores, and a helical secondary winding which is disposed coaxially of the cores and passes therethrough in circumferential succession. Additional novelty resides in the disposition of the electron source cathode filament input leads interiorly of the transformer secondary winding which is hollow, as well as in the employment of a half-wave filament supply which is synchronously operated with the transformer supply such that the transformer is pulsed during the zero current portions of the half-wave cycle.

  19. Detectors - Electronics

    International Nuclear Information System (INIS)

    Bregeault, J.; Gabriel, J.L.; Hierle, G.; Lebotlan, P.; Leconte, A.; Lelandais, J.; Mosrin, P.; Munsch, P.; Saur, H.; Tillier, J.

    1998-01-01

    The reports presents the main results obtained in the fields of radiation detectors and associated electronics. In the domain of X-ray gas detectors for the keV range efforts were undertaken to rise the detector efficiency. Multiple gap parallel plate chambers of different types as well as different types of X → e - converters were tested to improve the efficiency (values of 2.4% at 60 KeV were reached). In the field of scintillators a study of new crystals has been carried out (among which Lutetium orthosilicate). CdTe diode strips for obtaining X-ray imaging were studied. The complete study of a linear array of 8 CdTe pixels has been performed and certified. The results are encouraging and point to this method as a satisfying solution. Also, a large dimension programmable chamber was used to study the influence of temperature on the inorganic scintillators in an interval from -40 deg. C to +150 deg. C. Temperature effects on other detectors and electronic circuits were also investigated. In the report mentioned is also the work carried out for the realization of the DEMON neutron multidetector. For neutron halo experiments different large area Si detectors associated with solid and gas position detectors were realized. In the frame of a contract with COGEMA a systematic study of Li doped glasses was undertaken aiming at replacing with a neutron probe the 3 He counters presently utilized in pollution monitoring. An industrial prototype has been realised. Other studies were related to integrated analog chains, materials for Cherenkov detectors, scintillation probes for experiments on fundamental processes, gas position sensitive detectors, etc. In the field of associated electronics there are mentioned the works related to the multidetector INDRA, data acquisition, software gamma spectrometry, automatic gas pressure regulation in detectors, etc

  20. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  1. Nuclear electronics

    International Nuclear Information System (INIS)

    Lucero B, E.

    1989-01-01

    The rapid technical development of Colombia over the past years, resulted among others, a considerable increase in the number of measuring instrumentation and testing laboratories, scientific research and metrology centers, in industry, agriculture, public health, education on the nuclear field, etc. IAN is a well organized institution with qualified management, trained staff and reasonably equipped laboratories to carry out tasks as: Metrology, standardization, quality control and maintenance and repair of nuclear instruments. The government of Colombia has adopted a policy to establish and operate through the country maintenance and repair facilities for nuclear instrumentation. This policy is reflected in the organization of electronic laboratories in Bogota-IAN

  2. Basic electronics

    CERN Document Server

    Tayal, DC

    2010-01-01

    The second edition of this book incorporates the comments and suggestions of my friends and students who have critically studied the first edition. In this edition the changes and additions have been made and subject matter has been rearranged at some places. The purpose of this text is to provide a comprehensive and up-to-date study of the principles of operation of solid state devices, their basic circuits and application of these circuits to various electronic systems, so that it can serve as a standard text not only for universities and colleges but also for technical institutes. This book

  3. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  4. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    The global electrical energy consumption is still rising and there is an urgent demand to increase the power capacity. It is expected that the power capacity has to be doubled within 20 years. The production, distribution and use of energy should be as efficient as possible and incentives to save...... energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources will be high in the near future. Two major technologies will play important roles to solve the future problems. One...... is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...

  5. A Comparison of growth on mercuric chloride for three Lemnaceae species reveals differences in growth dynamics that effect their suitability for use in either monitoring or remediating ecosystems contaminated with mercury.

    Science.gov (United States)

    Yang, Jingjing; Li, Gaojie; Bishopp, Anthony; Heenatigala, P. P. M.; Hu, Shiqi; Chen, Yan; Wu, Zhigang; Kumar, Sunjeet; Duan, Pengfei; Yao, Lunguang; Hou, Hongwei

    2018-04-01

    Mercury (Hg) is a toxic heavy metal that can alter the ecological balance when it contaminates aquatic ecosystems. Previously, researchers have used various Lemnaceae species either to monitor and/or remove heavy metals from freshwater systems. As Hg contamination is a pressing issue for aquatic systems worldwide, we assessed its impact on the growth of three commonly species of Lemnaceae - Lemna gibba 6745, Lemna minor 6580 and Spirodela polyrhiza 5543. We exposed plants to different concentrations of mercuric chloride (HgCl2) and monitored their growth, including relative growth rate, frond number, and fresh weight. These data were coupled with measurements of starch content, levels of photosynthetic pigment and the activities of antioxidant substances. The growth of all three lines showed significant negative correlations with Hg concentrations, and starch content, photosynthetic pigment, soluble protein and antioxidant enzymes levels were all clearly affected. Our results indicate that the L. gibba line used in this study was the most suitable of the three for biomonitoring of water contaminated with Hg. Accumulation of Hg was highest in the S. polyrhiza line with a bioconcentration factor over 1000, making this line the most suitable of the three tested for use in an Hg bioremediation system.

  6. Sustainable Management of Electronics

    Science.gov (United States)

    To provide information on EPAs strategy for electronics stewardship, certified electronics recyclers and the Challenge; as well as where to donate unwanted electronics, how to calculate benefits, and what's going on with electronics mgmt in their states.

  7. EDITORIAL: Synaptic electronics Synaptic electronics

    Science.gov (United States)

    Demming, Anna; Gimzewski, James K.; Vuillaume, Dominique

    2013-09-01

    Conventional computers excel in logic and accurate scientific calculations but make hard work of open ended problems that human brains handle easily. Even von Neumann—the mathematician and polymath who first developed the programming architecture that forms the basis of today's computers—was already looking to the brain for future developments before his death in 1957 [1]. Neuromorphic computing uses approaches that better mimic the working of the human brain. Recent developments in nanotechnology are now providing structures with very accommodating properties for neuromorphic approaches. This special issue, with guest editors James K Gimzewski and Dominique Vuillaume, is devoted to research at the serendipitous interface between the two disciplines. 'Synaptic electronics', looks at artificial devices with connections that demonstrate behaviour similar to synapses in the nervous system allowing a new and more powerful approach to computing. Synapses and connecting neurons respond differently to incident signals depending on the history of signals previously experienced, ultimately leading to short term and long term memory behaviour. The basic characteristics of a synapse can be replicated with around ten simple transistors. However with the human brain having around 1011 neurons and 1015 synapses, artificial neurons and synapses from basic transistors are unlikely to accommodate the scalability required. The discovery of nanoscale elements that function as 'memristors' has provided a key tool for the implementation of synaptic connections [2]. Leon Chua first developed the concept of the 'The memristor—the missing circuit element' in 1971 [3]. In this special issue he presents a tutorial describing how memristor research has fed into our understanding of synaptic behaviour and how they can be applied in information processing [4]. He also describes, 'The new principle of local activity, which uncovers a minuscule life-enabling "Goldilocks zone", dubbed the

  8. Scanning transmission electron microscope

    NARCIS (Netherlands)

    Kruit, P.

    2006-01-01

    The invention relates to a scanning transmission electron microscope comprising an electron source, an electron accelerator and deflection means for directing electrons emitted by the electron source at an object to be examined, and in addition a detector for detecting electrons coming from the

  9. Carbon Nanotube Electron Gun

    Science.gov (United States)

    Nguyen, Cattien V. (Inventor); Ribaya, Bryan P. (Inventor)

    2013-01-01

    An electron gun, an electron source for an electron gun, an extractor for an electron gun, and a respective method for producing the electron gun, the electron source and the extractor are disclosed. Embodiments provide an electron source utilizing a carbon nanotube (CNT) bonded to a substrate for increased stability, reliability, and durability. An extractor with an aperture in a conductive material is used to extract electrons from the electron source, where the aperture may substantially align with the CNT of the electron source when the extractor and electron source are mated to form the electron gun. The electron source and extractor may have alignment features for aligning the electron source and the extractor, thereby bringing the aperture and CNT into substantial alignment when assembled. The alignment features may provide and maintain this alignment during operation to improve the field emission characteristics and overall system stability of the electron gun.

  10. Electron Beam Generation in Tevatron Electron Lenses

    International Nuclear Information System (INIS)

    Kamerdzhiev, V.; Kuznetsov, G.; Shiltsev, V.; Solyak, N.; Tiunov, M.

    2006-01-01

    New type of high perveance electron guns with convex cathode has been developed. Three guns described in this article are built to provide transverse electron current density distributions needed for Electron Lenses for beam-beam compensation in the Tevatron collider. The current distribution can be controlled either by the gun geometry or by voltage on a special control electrode located near cathode. We present the designs of the guns and report results of beam measurements on the test bench. Because of their high current density and low transverse temperature of electrons, electron guns of this type can be used in electron cooling and beam-beam compensation devices

  11. Electron beam generation in Tevatron electron lenses

    International Nuclear Information System (INIS)

    Kamerdzhiev, V.; Kuznetsov, G.; Shiltsev, V.; Solyak, N.; Tiunov, M.

    2006-01-01

    New type of high perveance electron guns with convex cathode has been developed. Three guns described in this article are built to provide transverse electron current density distributions needed for Electron Lenses for beam-beam compensation in the Tevatron collider. The current distribution can be controlled either by the gun geometry or by voltage on a special control electrode located near cathode. We present the designs of the guns and report results of beam measurements on the test bench. Because of their high current density and low transverse temperature of electrons, electron guns of this type can be used in electron cooling and beam-beam compensation devices

  12. Mobile electrons in electron-attaching liquids

    International Nuclear Information System (INIS)

    Nyikos, L.

    1981-01-01

    Based on recent observations of mobile electrons in electron-attaching liquids some ideas are presented concerning the nature of the fas carrier. To explain the observed phenomena quantum chemical calculations and modified percolation theory are applied. (author)

  13. Electronics for LHC Experiments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This document gathers the abstracts of most presentations made at this workshop on electronics for the large hadron collider (LHC) experiments. The presentations were arranged into 6 sessions: 1) electronics for tracker, 2) trigger electronics, 3) detector control systems, 4) data acquisition, 5) electronics for calorimeters and electronics for muons, and 6) links, power systems, grounding and shielding, testing and quality assurance.

  14. Electronics for LHC Experiments

    International Nuclear Information System (INIS)

    2004-01-01

    This document gathers the abstracts of most presentations made at this workshop on electronics for the large hadron collider (LHC) experiments. The presentations were arranged into 6 sessions: 1) electronics for tracker, 2) trigger electronics, 3) detector control systems, 4) data acquisition, 5) electronics for calorimeters and electronics for muons, and 6) links, power systems, grounding and shielding, testing and quality assurance

  15. Electronic Design Automation Using Object Oriented Electronics

    OpenAIRE

    Walid M. Aly; Mohamed S. Abuelnasr

    2010-01-01

    Problem statement: Electronic design automation is the usage of computer technology and software tools for designing integrated electronic system and creating electrical schematics. Approach: An approach is presented for modeling of various electronic and electric devices using object oriented design, aiming on building a library of devices (classes) which can be used for electronic design automation. Results: The presented library was implemented using Java programming language to form an El...

  16. Electron Microscopy Center (EMC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Electron Microscopy Center (EMC) at Argonne National Laboratory develops and maintains unique capabilities for electron beam characterization and applies those...

  17. Introduction to Electronics course

    CERN Multimedia

    CERN. Geneva HR-RFA

    2006-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  18. Introduction to electronics

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  19. Seeing with Electrons

    Indian Academy of Sciences (India)

    Seeing with Electrons. A K Raychaudhuri. In this article we briefly review the application of electrons in the field of microscopy. Two types of microscopes are discussed, the electron microscope and the tunneling microscope. It is emphasized that in both the applications the electron behaves as a quantum mechanical object.

  20. Introduction to Electronic Marketing.

    Science.gov (United States)

    Dilbeck, Lettie

    These materials for a five-unit course were developed to introduce secondary and postsecondary students to the use of electronic equipment in marketing. The units cover the following topics: electronic marketing as a valid marketing approach; telemarketing; radio electronic media marketing; television electronic media marketing; and cable TV…

  1. In Situ Transmission Electron Microscopy for Electronics

    OpenAIRE

    Arita, Masashi; Hamada, Kouichi; Takahashi, Yasuo; Sueoka, Kazuhisa; Shibayama, Tamaki

    2015-01-01

    Electronic devices are strongly influenced by their microstructures. In situ transmission electron microscopy (in situ TEM) with capability to measure electrical properties is an effective method to dynamically correlate electric properties with microstructures. We have developed tools and in situ TEM experimental procedures for measuring electronic devices, including TEM sample holders and sample preparation methods. The method was used to study metallic nanowire by electromigration, magn...

  2. Electronics engineer's reference book

    CERN Document Server

    Mazda, F F

    1989-01-01

    Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

  3. Electron transfer reactions

    CERN Document Server

    Cannon, R D

    2013-01-01

    Electron Transfer Reactions deals with the mechanisms of electron transfer reactions between metal ions in solution, as well as the electron exchange between atoms or molecules in either the gaseous or solid state. The book is divided into three parts. Part 1 covers the electron transfer between atoms and molecules in the gas state. Part 2 tackles the reaction paths of oxidation states and binuclear intermediates, as well as the mechanisms of electron transfer. Part 3 discusses the theories and models of the electron transfer process; theories and experiments involving bridged electron transfe

  4. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  5. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  6. Electron-electron interactions in disordered systems

    CERN Document Server

    Efros, AL

    1985-01-01

    ``Electron-Electron Interactions in Disordered Systems'' deals with the interplay of disorder and the Coulomb interaction. Prominent experts give state-of-the-art reviews of the theoretical and experimental work in this field and make it clear that the interplay of the two effects is essential, especially in low-dimensional systems.

  7. Energy electron analyzers raster electron microscope

    International Nuclear Information System (INIS)

    Dremova, N.N.; Raj, Eh.I.; Robinson, V.N.

    1995-01-01

    Spectrometers of back-scattered and secondary electrons used in a raster electron microscope designed to study multilayer structures and potential relief at the solid-state body surface, are described. Their possible applications are demonstrated using microelectronics devices as an example

  8. Single electron-ics with carbon nanotubes

    NARCIS (Netherlands)

    Götz, G.T.J.

    2010-01-01

    We experimentally investigate Quantum Dots, formed in Carbon Nanotubes. The first part of this thesis deals with charge sensing on such quantum dots. The charge sensor is a metallic Single-electron-transistor, sensitive to the charge of a single electron on the quantum dot. We use this technique for

  9. VIRTUAL ELECTRONIC COMPONENTS OF THE ELECTRONIC EQUIPMENT

    Directory of Open Access Journals (Sweden)

    E. Lazarevich

    2013-01-01

    Full Text Available The article is present new idea of the creation, developments and improvements of the electronic equipment of complex systems by means of the virtual electronic components. The idea of the virtual electronic components is a presentation and perception of the creation and developments of the equipment on two forming: real – in the manner of standard marketed block of the intellectual property and image – in the manner of virtual component. The real component in most cases slows the development of the electronic equipment. The imaginary component is the «locomotive» of development of the electronic equipment. The Imaginary component contains the scientific has brushed against developer. The scientific has brushed against developer reveals of itself in the manner of virtual component on the modern level of the design rates of microelectronics.

  10. Potential of macrophyte for removing arsenic from aqueous solution Potencial de remoção de arsênio de solução aquosa por macrofita

    Directory of Open Access Journals (Sweden)

    F.P. Guimaraes

    2012-12-01

    Full Text Available The potential of three aquatic macrophytes, Azoll caroliniana, Salvinia minima and Lemna gibba, was evaluated in this work aimed at selection of plants to be used in remediation of environments contaminated by arsenic (As. The experiments were carried out in a greenhouse during six days in pots containing Hoagland solution (¼ ionic strength at As concentrations of 0.5; 2.5 and 5.0 mg L-1. The three species showed greater As accumulation as the concentration of the metalloid in solution increased. However, a reduction was detected in fresh and dry mass gain when the plants were exposed to high As concentrations. The macrophytes showed differences in efficiency of removal of As in solution. A. caroliniana, S. minima and L. gibba accumulated, on average, 0.130; 0.200; and 1.397 mg mDM-1, respectively, when exposed to 5.0 mg L-1 of As. The macrophytes absorbed a greater quantity of As in solution with low phosphate content. The greater As concentration in L. gibba tissues lowered the chlorophyll and carotenoid contents as shown by the high chlorosis incidence. Lemna gibba also exhibited a decrease in leaf size, with the total chlorophyll and carotenoid synthesis not being affected by As in A. caroliniana. This species exhibited purplish leaves with high concentration of anthocyanin, whose presence suggested association to phosphate deficiency. Marginal necrosis occurred on S. minima floating leaves, with the released daughter-plants not showing any visual symptoms during the treatment. The percentage of As removed from the solution decreased when the plants were exposed to high concentrations of the pollutant. Among the three species studied, only L. gibba could be considered an As hyper-accumulator. The use of this plant species for remediation of aquatic environments was shown to be limited and requires further investigation.O potencial de três macrófitas aquáticas - Azolla caroliniana, Salvinia mínima e Lemna gibba - foi avaliado neste

  11. Electronics for dummies

    CERN Document Server

    Shamieh

    2015-01-01

    Explore the basic concepts of electronics, build your electronics workbench, and begin creating fun electronics projects right away! Electronics For Dummies, 3rd Edition is your guide to the world of electronics. Spanning circuitry, wiring, robotics, transmitters, amplifiers, and more, this book demystifies electricity basics and beyond. The third edition offers new content revised to reflect the latest advancements in the electronics field, and it offers full color project examples to spark your creativity and inspire you to put your new skills to use! Packed with projects that can be comple

  12. RHIC electron lenses upgrades

    Energy Technology Data Exchange (ETDEWEB)

    Gu, X. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Altinbas, Z. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Bruno, D. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Binello, S. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Costanzo, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Drees, A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Fischer, W. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Gassner, D. M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Hock, J. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Hock, K. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Harvey, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Luo, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Marusic, A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Mi, C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Mernick, K. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Minty, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Michnoff, R. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Miller, T. A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Pikin, A. I. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Robert-Demolaize, G. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Samms, T. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Shrey, T. C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Schoefer, V. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Tan, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Than, R. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Thieberger, P. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; White, S. M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2015-05-03

    In the Relativistic Heavy Ion Collider (RHIC) 100 GeV polarized proton run in 2015, two electron lenses were used to partially compensate for the head-on beam-beam effect for the first time. Here, we describe the design of the current electron lens, detailing the hardware modifications made after the 2014 commissioning run with heavy ions. A new electron gun with 15-mm diameter cathode is characterized. The electron beam transverse profile was measured using a YAG screen and fitted with a Gaussian distribution. During operation, the overlap of the electron and proton beams was achieved using the electron backscattering detector in conjunction with an automated orbit control program.

  13. Electron scattering from pyrimidine

    International Nuclear Information System (INIS)

    Colmenares, Rafael; Fuss, Martina C; García, Gustavo; Oller, Juan C; Muñoz, Antonio; Blanco, Francisco; Almeida, Diogo; Limão-Vieira, Paulo

    2014-01-01

    Electron scattering from pyrimidine (C 4 H 4 N 2 ) was investigated over a wide range of energies. Following different experimental and theoretical approaches, total, elastic and ionization cross sections as well as electron energy loss distributions were obtained.

  14. ELSA electron stretcher devices

    International Nuclear Information System (INIS)

    1979-10-01

    The use of an electron stretcher ring at the Bonn electron synchrotron is discussed. The construction of the proposed ring is described, and the costs are estimated. Possible experiments using this ring are discussed. (HSI)

  15. Chapter 9: Electronics

    International Nuclear Information System (INIS)

    Grupen, Claus; Shwartz, Boris A.

    2006-01-01

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

  16. Electron Paramagnetic Resonance Spectroscopy

    Indian Academy of Sciences (India)

    IAS Admin

    ARTICLE. Electron Paramagnetic Resonance Spectroscopy. Biological Applications. B G Hegde. Recently, electron paramagnetic resonance (EPR) spectros- copy has emerged as a powerful tool to study the structure and dynamics of biological macromolecules such as proteins, protein aggregates ... research interests are.

  17. Electronic Health Records

    Science.gov (United States)

    ... Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Electronic Health Records KidsHealth / For Teens / Electronic Health Records ...

  18. Electron microscopy for Engineers

    International Nuclear Information System (INIS)

    Jones, I P

    2009-01-01

    This paper reviews the application of (mainly) Transmission Electron Microscopy (TEM) in an engineering context. The first two sections are TEM and chemical in nature; the final three sections are more general and include aspects of Scanning Electron Microscopy (SEM).

  19. Certified Electronics Recyclers

    Science.gov (United States)

    Learn how EPA encourages all electronics recyclers become certified by demonstrating to an accredited, independent third-party auditor and that they meet specific standards to safely recycle and manage electronics.

  20. Laboratory Handbook Electronics

    CERN Multimedia

    1966-01-01

    Laboratory manual 1966 format A3 with the list of equipment cables, electronic tubes, chassis, diodes transistors etc. One of CERN's first material catalogue for construction components for mechanical and electronic chassis.

  1. Electronic Science Seminar

    Directory of Open Access Journals (Sweden)

    Geidarov P.Sh.

    2015-09-01

    Full Text Available The structure of electronic scientific seminar, which provides a high level of quality of the objectivity in the evaluation of scientific papers, including dissertations, is described. Conditions for the implementation of electronic scientific seminar are also considered.

  2. Paleoclassical electron heat transport

    International Nuclear Information System (INIS)

    Callen, J.D.

    2005-01-01

    Radial electron heat transport in low collisionality, magnetically-confined toroidal plasmas is shown to result from paleoclassical Coulomb collision processes (parallel electron heat conduction and magnetic field diffusion). In such plasmas the electron temperature equilibrates along magnetic field lines a long length L, which is the minimum of the electron collision length and a maximum effective half length of helical field lines. Thus, the diffusing field lines induce a radial electron heat diffusivity M ≅ L/(πR 0q ) ∼ 10 >> 1 times the magnetic field diffusivity η/μ 0 ≅ ν e (c/ω p ) 2 . The paleoclassical electron heat flux model provides interpretations for many features of 'anomalous' electron heat transport: magnitude and radial profile of electron heat diffusivity (in tokamaks, STs, and RFPs), Alcator scaling in high density plasmas, transport barriers around low order rational surfaces and near a separatrix, and a natural heat pinch (or minimum temperature gradient) heat flux form. (author)

  3. Electronic Submission of Labels

    Science.gov (United States)

    Pesticide registrants can provide draft and final labels to EPA electronically for our review as part of the pesticide registration process. The electronic submission of labels by registrants is voluntary but strongly encouraged.

  4. Joint Services Electronics Program.

    Science.gov (United States)

    1983-09-30

    Compound Semiconductors." 4 ......... I-*. Univesity of California. Berkeley Electronics Research Laboratory Joint Services Electronics Program August 15...reduction techniques [SCH-66,MCG- 73,HAM-75], for essentially i educing the proportionality constant. A significant portion of the probabilistic literature

  5. Handbook on electronic commerce

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

    2000-07-01

    The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

  6. Electronics and computer acronyms

    CERN Document Server

    Brown, Phil

    1988-01-01

    Electronics and Computer Acronyms presents a list of almost 2,500 acronyms related to electronics and computers. The material for this book is drawn from a number of subject areas, including electrical, electronics, computers, telecommunications, fiber optics, microcomputers/microprocessors, audio, video, and information technology. The acronyms also encompass avionics, military, data processing, instrumentation, units, measurement, standards, services, organizations, associations, and companies. This dictionary offers a comprehensive and broad view of electronics and all that is associated wi

  7. Extreme environment electronics

    CERN Document Server

    Cressler, John D

    2012-01-01

    Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world's foremost exp

  8. Electron-attachment processes

    International Nuclear Information System (INIS)

    Christophorou, L.G.; McCorkle, D.L.; Christodoulides, A.A.

    1982-01-01

    Topics covered include: (1) modes of production of negative ions, (2) techniques for the study of electron attachment processes, (3) dissociative electron attachment to ground-state molecules, (4) dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), (5) molecular parent negative ions, and (6) negative ions formed by ion-pair processes and by collisions of molecules with ground state and Rydberg atoms

  9. Electron Cyclotron Resonances in Electron Cloud Dynamics

    International Nuclear Information System (INIS)

    Celata, Christine; Celata, C.M.; Furman, Miguel A.; Vay, J.-L.; Yu, Jennifer W.

    2008-01-01

    We report a previously unknown resonance for electron cloud dynamics. The 2D simulation code 'POSINST' was used to study the electron cloud buildup at different z positions in the International Linear Collider positron damping ring wiggler. An electron equilibrium density enhancement of up to a factor of 3 was found at magnetic field values for which the bunch frequency is an integral multiple of the electron cyclotron frequency. At low magnetic fields the effects of the resonance are prominent, but when B exceeds ∼(2 pi mec/(elb)), with lb = bunch length, effects of the resonance disappear. Thus short bunches and low B fields are required for observing the effect. The reason for the B field dependence, an explanation of the dynamics, and the results of the 2D simulations and of a single-particle tracking code used to elucidate details of the dynamics are discussed

  10. Arduino electronics blueprints

    CERN Document Server

    Wilcher, Don

    2015-01-01

    This book is intended for those who want to learn about electronics and coding by building amazing devices and gadgets with Arduino. If you are an experienced developer who understands the basics of electronics, then you can quickly learn how to build smart devices using Arduino. The only experience needed is a desire to learn about electronics, circuit breadboarding, and coding.

  11. Electron Induction Linacs

    Science.gov (United States)

    Caporaso, George J.; Chen, Yu-Jiuan

    Electron induction linacs have been used for over four decades for a variety of applications. As discussed in Chap. 8, these include basic studies in magnetically confined fusion, transport of intense electron beams in various gases, the generation of electromagnetic radiation from free electron lasers, radiation processing of materials and food, and flash X-ray radiography sources.

  12. Electronic recordkeeping: An introduction

    Energy Technology Data Exchange (ETDEWEB)

    Deken, J.M.

    2000-01-19

    This paper begins with a brief overview of records and archival management before the advent of the electronic era; then describe the ways in which the definitions and constructs of archives and records management have been altered in the electronic environment; and outlines the various approaches to the challenges of electronic recordkeeping that are currently being investigated and applied.

  13. Syringe-injectable electronics.

    Science.gov (United States)

    Liu, Jia; Fu, Tian-Ming; Cheng, Zengguang; Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M

    2015-07-01

    Seamless and minimally invasive three-dimensional interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating the syringe injection (and subsequent unfolding) of sub-micrometre-thick, centimetre-scale macroporous mesh electronics through needles with a diameter as small as 100 μm. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with >90% device yield. We demonstrate several applications of syringe-injectable electronics as a general approach for interpenetrating flexible electronics with three-dimensional structures, including (1) monitoring internal mechanical strains in polymer cavities, (2) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (3) in vivo multiplexed neural recording. Moreover, syringe injection enables the delivery of flexible electronics through a rigid shell, the delivery of large-volume flexible electronics that can fill internal cavities, and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics.

  14. Syringe injectable electronics

    Science.gov (United States)

    Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

    2015-01-01

    Seamless and minimally-invasive three-dimensional (3D) interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating syringe injection and subsequent unfolding of submicrometer-thick, centimeter-scale macroporous mesh electronics through needles with a diameter as small as 100 micrometers. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with > 90% device yield. We demonstrate several applications of syringe injectable electronics as a general approach for interpenetrating flexible electronics with 3D structures, including (i) monitoring of internal mechanical strains in polymer cavities, (ii) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (iii) in vivo multiplexed neural recording. Moreover, syringe injection enables delivery of flexible electronics through a rigid shell, delivery of large volume flexible electronics that can fill internal cavities and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics. PMID:26053995

  15. EFFECTIVE ELECTRONIC TUTORIAL

    Directory of Open Access Journals (Sweden)

    Andrei A. Fedoseev

    2014-01-01

    Full Text Available The article analyzes effective electronic tutorials creation and application based on the theory of pedagogy. Herewith the issues of necessary electronic tutorial functional, ways of the educational process organization with the use of information and communication technologies and the logistics of electronic educational resources are touched upon. 

  16. ELECTRONS IN NONPOLAR LIQUIDS.

    Energy Technology Data Exchange (ETDEWEB)

    HOLROYD,R.A.

    2002-10-22

    Excess electrons can be introduced into liquids by absorption of high energy radiation, by photoionization, or by photoinjection from metal surfaces. The electron's chemical and physical properties can then be measured, but this requires that the electrons remain free. That is, the liquid must be sufficiently free of electron attaching impurities for these studies. The drift mobility as well as other transport properties of the electron are discussed here as well as electron reactions, free-ion yields and energy levels, Ionization processes typically produce electrons with excess kinetic energy. In liquids during thermalization, where this excess energy is lost to bath molecules, the electrons travel some distance from their geminate positive ions. In general the electrons at this point are still within the coulombic field of their geminate ions and a large fraction of the electrons recombine. However, some electrons escape recombination and the yield that escapes to become free electrons and ions is termed G{sub fi}. Reported values of G{sub fi} for molecular liquids range from 0.05 to 1.1 per 100 eV of energy absorbed. The reasons for this 20-fold range of yields are discussed here.

  17. comparative study on the efficiency of Lemna minor L.

    African Journals Online (AJOL)

    from kaduna refinery and Petro-chemical Company. Water samples were collected from Kaduna ... use in the phytoremediation of water from Kaduna. Refining and Petro-chemical Company since it shows the ..... Wolverton, B.C. and McDonald, R.C. (1979): The Water. Hyacinth: From Prolific Pest to Potential Provider.,Ambio ...

  18. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  19. High brightness electron accelerator

    International Nuclear Information System (INIS)

    Sheffield, R.L.; Carlsten, B.E.; Young, L.M.

    1994-01-01

    A compact high brightness linear accelerator is provided for use, e.g., in a free electron laser. The accelerator has a first plurality of accelerating cavities having end walls with four coupling slots for accelerating electrons to high velocities in the absence of quadrupole fields. A second plurality of cavities receives the high velocity electrons for further acceleration, where each of the second cavities has end walls with two coupling slots for acceleration in the absence of dipole fields. The accelerator also includes a first cavity with an extended length to provide for phase matching the electron beam along the accelerating cavities. A solenoid is provided about the photocathode that emits the electrons, where the solenoid is configured to provide a substantially uniform magnetic field over the photocathode surface to minimize emittance of the electrons as the electrons enter the first cavity. 5 figs

  20. Electron reconstruction in CMS

    CERN Document Server

    Baffioni, Stephanie; Ferri, Federico; Futyan, David; Meridiani, Paolo; Puljak, Ivica; Rovelli, Chiara; Salerno, Roberto; Sirois, Yves

    2006-01-01

    The reconstruction of the energy and momentum of isolated electrons in CMS combining tracking and electromagnetic calorimetry information is described. The emphasis is put on primary electrons with transverse momentum below 50 GeV/c. The energy deposited in the electromagnetic calorimeter is measured in superclusters which collect bremsstrahlung photons emitted along the electron trajectory in the tracker volume. The electron tracks are built from seeds in the pixel detector found via a cluster-driven pixel hit matching algorithm, followed by a reconstruction of trajectories in the silicon strip tracker with a Gaussian Sum Filter. Electrons are classified using observables sensitive to the pattern of bremsstrahlung emission and electromagnetic showering in the tracker material. Energy scale corrections depending on the electron class are applied to the supercluster and estimates of associated errors are obtained. The electron energy is deduced from a weighted combination of the corrected supercluster energy a...

  1. Electron crystallography and aquaporins.

    Science.gov (United States)

    Schenk, Andreas D; Hite, Richard K; Engel, Andreas; Fujiyoshi, Yoshinori; Walz, Thomas

    2010-01-01

    Electron crystallography of two-dimensional (2D) crystals can provide information on the structure of membrane proteins at near-atomic resolution. Originally developed and used to determine the structure of bacteriorhodopsin (bR), electron crystallography has recently been applied to elucidate the structure of aquaporins (AQPs), a family of membrane proteins that form pores mostly for water but also other solutes. While electron crystallography has made major contributions to our understanding of the structure and function of AQPs, structural studies on AQPs, in turn, have fostered a number of technical developments in electron crystallography. In this contribution, we summarize the insights electron crystallography has provided into the biology of AQPs, and describe technical advancements in electron crystallography that were driven by structural studies on AQP 2D crystals. In addition, we discuss some of the lessons that were learned from electron crystallographic work on AQPs. Copyright © 2010 Elsevier Inc. All rights reserved.

  2. Seeing with electrons

    International Nuclear Information System (INIS)

    Nellist, P.

    2006-01-01

    Commercially available lens correctors are extending the reach of electron microscopes to unprecedented atomic scales, as Peter Nellist describes. The electron microscope was invented in 1933 and is based on the principle that electrons have a wavelength that is inversely proportional to their momentum. There are two basic types: transmission electron microscopes and scanning electron microscopes, plus a hybrid of the two. The lenses in an electron microscope are provided by electromagnetic fields, but they suffer from spherical aberration. The addition of octupole and quadrupole corrector fields has improved the resolution of the electron microscope to better than 0.1 nm in the last decade. The next step is to correct for chromatic aberration, after which the resolution of the microscope will probably be limited by the size of the atom itself. (U.K.)

  3. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  4. Advanced adhesives in electronics

    CERN Document Server

    Bailey, C

    2011-01-01

    Adhesives are widely used in the manufacture of electronic devices to act as passive and active components. Recently there has been considerable interest in the use of conductive adhesives. This book reviews key types of conductive adhesives, processing methods, properties and the way they can be modelled as well as potential applications.$bAdhesives for electronic applications serve important functional and structural purposes in electronic components and packaging, and have developed significantly over the last few decades. Advanced adhesives in electronics reviews recent developments in adhesive joining technology, processing and properties. The book opens with an introduction to adhesive joining technology for electronics. Part one goes on to cover different types of adhesive used in electronic systems, including thermally conductive adhesives, isotropic and anisotropic conductive adhesives and underfill adhesives for flip-chip applications. Part two focuses on the properties and processing of electronic ...

  5. Automotive electronics design fundamentals

    CERN Document Server

    Zaman, Najamuz

    2015-01-01

    This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs.  A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.

  6. ELECTRON COOLING OF RHIC.

    Energy Technology Data Exchange (ETDEWEB)

    BEN-ZVI, I.; LITVINENKO, V.; BARTON, D.; ET AL.

    2005-05-16

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV.

  7. Scanning ultrafast electron microscopy.

    Science.gov (United States)

    Yang, Ding-Shyue; Mohammed, Omar F; Zewail, Ahmed H

    2010-08-24

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability.

  8. Engineered phages for electronics.

    Science.gov (United States)

    Cui, Yue

    2016-11-15

    Phages are traditionally widely studied in biology and chemistry. In recent years, engineered phages have attracted significant attentions for functionalization or construction of electronic devices, due to their specific binding, catalytic, nucleating or electronic properties. To apply the engineered phages in electronics, these are a number of interesting questions: how to engineer phages for electronics? How are the engineered phages characterized? How to assemble materials with engineered phages? How are the engineered phages micro or nanopatterned? What are the strategies to construct electronics devices with engineered phages? This review will highlight the early attempts to address these questions and explore the fundamental and practical aspects of engineered phages in electronics, including the approaches for selection or expression of specific peptides on phage coat proteins, characterization of engineered phages in electronics, assembly of electronic materials, patterning of engineered phages, and construction of electronic devices. It provides the methodologies and opens up ex-cit-ing op-por-tu-ni-ties for the development of a variety of new electronic materials and devices based on engineered phages for future applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Electronic Publishing or Electronic Information Handling?

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

  10. Field emission electron source

    Science.gov (United States)

    Zettl, Alexander Karlwalter; Cohen, Marvin Lou

    2000-01-01

    A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

  11. Interoperability for electronic ID

    OpenAIRE

    Zygadlo, Zuzanna

    2009-01-01

    Electronic Business, including eBanking, eCommerce and eGovernmental services, is today based on a large variety of security solutions, comprising electronic IDs provided by a broad community of Public Key Infrastructure (PKI) vendors. Significant differences in implementations of those solutions introduce a problem of lack of interoperability in electronic business, which have not yet been resolved by standardization and interoperability initiatives based on existing PKI trust models. It i...

  12. Introduction to electronics

    CERN Document Server

    Korneff, Theodore

    1966-01-01

    Introduction to Electronics focuses on the study of electronics and electronic devices. Composed of 14 chapters, the book starts with discussions on dc circuits, including resistance, voltmeter, ammeter, galvanometer, internal resistance, and positive and negative currents. This topic is followed by discussions on ac circuits, particularly addressing voltage and current, average power, resistive load, complex plane, and parallel circuits. Discussions also focus on filters and tuned circuits, diodes, and power supplies. Particularly given attention are the processes, diagrams, and analyses

  13. Modern electronic materials

    CERN Document Server

    Watkins, John B

    2013-01-01

    Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

  14. Electronic collection management

    CERN Document Server

    Mcginnis, Suzan D

    2013-01-01

    Build and manage your collection of digital resources with these successful strategies! This comprehensive volume is a practical guide to the art and science of acquiring and organizing electronic resources. The collections discussed here range in size from small college libraries to large research libraries, but all are facing similar problems: shrinking budgets, increasing demands, and rapidly shifting formats. Electronic Collection Management offers new ideas for coping with these issues. Bringing together diverse aspects of collection development, Electronic Collection

  15. Electron microscopy of surfaces

    International Nuclear Information System (INIS)

    Venables, J.A.

    1981-01-01

    Electron beam techniques used to study clean surfaces and surface processes on a microscopic scale are reviewed. Recent experimental examples and possible future developments are discussed. Special emphasis is given to (i) transmission diffraction and microscopy techniques, including atomic imaging; (ii) Auger microscopy on bulk and thin film samples; (iii) secondary electron microscopy, especially low energy secondaries for work-function imaging and photoelectron imaging; and (iv) reflection electron microscopy and diffraction. (orig.)

  16. Introduction to printed electronics

    CERN Document Server

    Suganuma, Katsuaki

    2014-01-01

    This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large, and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.

  17. Electron microscopy and diffraction

    International Nuclear Information System (INIS)

    Gjoennes, J.; Olsen, A.

    1986-01-01

    This report is a description of research activities and plans at the electron microscopy laboratorium, Physics Department, University of Oslo. Since the first electron microscope was installed in 1968, the research has covered inorganic structures, physical metallurgy, as well as theory of electron scattering and the development of methods in this field. The current plans involve efforts in the development of crystallographic and spectroscopic methods

  18. New electronics stuff chemistry

    International Nuclear Information System (INIS)

    Byeon, Su Il

    2003-04-01

    The first part of this book is about equilibrium electrochemistry on electric thermo dynamic equilibrium state of electrochemistry, crystal defect of solid, thermodynamics on defect electron and election in semiconductor, Gawani potential, volta potential and equilibrium potential and thermodynamics application in Gawani battery. The second part deals with dynamic electrochemistry electrode reaction kinetics and corrosion potential in normal state, diffusion and transport of ion and electron and current impedance spectroscopy. It also mentions industrial electrochemistry and laboratory works in electronics chemistry course.

  19. Physical foundations of electron microscopy

    International Nuclear Information System (INIS)

    Alexander, H.

    1997-01-01

    The following topics were dealt with: Physical foundations, dynamic theory of diffraction contrasts, dynamic theory of electron diffraction, electron diffraction on crystals with defects, high-resolution electron microscopy, analytical electron microscopy

  20. Stationary Electron Atomic Model

    Science.gov (United States)

    Pressler, David E.

    1998-04-01

    I will present a novel theory concerning the position and nature of the electron inside the atom. This new concept is consistant with present experimental evidence and adheres strictly to the valence-shell electron-pair repulsion (VSEPR) model presently used in chemistry for predicting the shapes of molecules and ions. In addition, I will discuss the atomic model concept as being a true harmonic oscillator, periodic motion at resonant frequency which produces radiation at discrete frequencies or line spectra is possible because the electron is under the action of two restoring forces, electrostatic attraction and superconducting respulsion of the electron's magnetic field by the nucleus.

  1. Electronic signal conditioning

    CERN Document Server

    NEWBY, BRUCE

    1994-01-01

    At technician level, brief references to signal conditioning crop up in a fragmented way in various textbooks, but there has been no single textbook, until now!More advanced texts do exist but they are more mathematical and presuppose a higher level of understanding of electronics and statistics. Electronic Signal Conditioning is designed for HNC/D students and City & Guilds Electronics Servicing 2240 Parts 2 & 3. It will also be useful for BTEC National, Advanced GNVQ, A-level electronics and introductory courses at degree level.

  2. Electron correlation in molecules

    CERN Document Server

    Wilson, S

    2007-01-01

    Electron correlation effects are of vital significance to the calculation of potential energy curves and surfaces, the study of molecular excitation processes, and in the theory of electron-molecule scattering. This text describes methods for addressing one of theoretical chemistry's central problems, the study of electron correlation effects in molecules.Although the energy associated with electron correlation is a small fraction of the total energy of an atom or molecule, it is of the same order of magnitude as most energies of chemical interest. If the solution of quantum mechanical equatio

  3. The auroral electron accelerator

    International Nuclear Information System (INIS)

    Bryant, D.A.; Hall, D.S.

    1989-01-01

    A model of the auroral electron acceleration process is presented in which the electrons are accelerated resonantly by lower-hybrid waves. The essentially stochastic acceleration process is approximated for the purposes of computation by a deterministic model involving an empirically derived energy transfer function. The empirical function, which is consistent with all that is known of electron energization by lower-hybrid waves, allows many, possibly all, observed features of the electron distribution to be reproduced. It is suggested that the process occurs widely in both space and laboratory plasmas. (author)

  4. Electronics circuits and systems

    CERN Document Server

    Bishop, Owen

    2011-01-01

    The material in Electronics - Circuits and Systems is a truly up-to-date textbook, with coverage carefully matched to the electronics units of the 2007 BTEC National Engineering and the latest AS and A Level specifications in Electronics from AQA, OCR and WJEC. The material has been organized with a logical learning progression, making it ideal for a wide range of pre-degree courses in electronics. The approach is student-centred and includes: numerous examples and activities; web research topics; Self Test features, highlighted key facts, formulae and definitions. Ea

  5. Electronics circuits and systems

    CERN Document Server

    Bishop, Owen

    2007-01-01

    The material in Electronics - Circuits and Systems is a truly up-to-date textbook, with coverage carefully matched to the electronics units of the 2007 BTEC National Engineering and the latest AS and A Level specifications in Electronics from AQA, OCR and WJEC. The material has been organized with a logical learning progression, making it ideal for a wide range of pre-degree courses in electronics. The approach is student-centred and includes: numerous examples and activities; web research topics; Self Test features, highlighted key facts, formulae and definitions. Each chapter ends with a set

  6. Electronics Environmental Benefits Calculator

    Science.gov (United States)

    The Electronics Environmental Benefits Calculator (EEBC) was developed to assist organizations in estimating the environmental benefits of greening their purchase, use and disposal of electronics.The EEBC estimates the environmental and economic benefits of: Purchasing Electronic Product Environmental Assessment Tool (EPEAT)-registered products; Enabling power management features on computers and monitors above default percentages; Extending the life of equipment beyond baseline values; Reusing computers, monitors and cell phones; and Recycling computers, monitors, cell phones and loads of mixed electronic products.The EEBC may be downloaded as a Microsoft Excel spreadsheet.See https://www.federalelectronicschallenge.net/resources/bencalc.htm for more details.

  7. Analytical Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — The Titan 80-300 is a transmission electron microscope (TEM) equipped with spectroscopic detectors to allow chemical, elemental, and other analytical measurements to...

  8. Electron caustic lithography

    Directory of Open Access Journals (Sweden)

    S. M. Kennedy

    2012-06-01

    Full Text Available A maskless method of electron beam lithography is described which uses the reflection of an electron beam from an electrostatic mirror to produce caustics in the demagnified image projected onto a resist–coated wafer. By varying the electron optics, e.g. via objective lens defocus, both the morphology and dimensions of the caustic features may be controlled, producing a range of bright and tightly focused projected features. The method is illustrated for line and fold caustics and is complementary to other methods of reflective electron beam lithography.

  9. High-power electronics

    CERN Document Server

    Kapitsa, Petr Leonidovich

    1966-01-01

    High-Power Electronics, Volume 2 presents the electronic processes in devices of the magnetron type and electromagnetic oscillations in different systems. This book explores the problems of electronic energetics.Organized into 11 chapters, this volume begins with an overview of the motion of electrons in a flat model of the magnetron, taking into account the in-phase wave and the reverse wave. This text then examines the processes of transmission of electromagnetic waves of various polarization and the wave reflection from grids made of periodically distributed infinite metal conductors. Other

  10. Flying Electronic Warfare Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides NP-3D aircraft host platforms for Effectiveness of Navy Electronic Warfare Systems (ENEWS) Program antiship missile (ASM) seeker simulators used...

  11. Electronics pocket book

    CERN Document Server

    Parr, E A

    1981-01-01

    Electronics Pocket Book, Fourth Edition is a nonmathematical presentation of the many varied topics covered by electronics. The book tackles electron physics, electronic components (i.e. resistors, capacitors, and conductors), integrated circuits, and the principles of a.c. and d.c. amplifiers. The text also discusses oscillators, digital circuits, digital computers, and optoelectronics (i.e., sensors, emitters, and devices that utilize light). Communications (such as line and radio communications, transmitters, receivers, and digital techniques); the principles and examples of servosystems; a

  12. Fundamentals of electronics

    CERN Document Server

    Schubert, Thomas F

    2015-01-01

    This book, Electronic Devices and Circuit Application, is the first of four books of a larger work, Fundamentals of Electronics. It is comprised of four chapters describing the basic operation of each of the four fundamental building blocks of modern electronics: operational amplifiers, semiconductor diodes, bipolar junction transistors, and field effect transistors. Attention is focused on the reader obtaining a clear understanding of each of the devices when it is operated in equilibrium. Ideas fundamental to the study of electronic circuits are also developed in the book at a basic level to

  13. Electronic circuits fundamentals & applications

    CERN Document Server

    Tooley, Mike

    2015-01-01

    Electronics explained in one volume, using both theoretical and practical applications.New chapter on Raspberry PiCompanion website contains free electronic tools to aid learning for students and a question bank for lecturersPractical investigations and questions within each chapter help reinforce learning Mike Tooley provides all the information required to get to grips with the fundamentals of electronics, detailing the underpinning knowledge necessary to appreciate the operation of a wide range of electronic circuits, including amplifiers, logic circuits, power supplies and oscillators. The

  14. Electronics Environmental Benefits Calculator

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Electronics Environmental Benefits Calculator (EEBC) was developed to assist organizations in estimating the environmental benefits of greening their purchase,...

  15. Electron Beam Lithography

    Science.gov (United States)

    Harriott, Lloyd R.

    1997-04-01

    Electron beams have played a significant role in semiconductor technology for more than twenty years. Early electron beam machines used a raster scanned beam spot to write patterns in electron-sensitive polymer resist materials. The main application of electron beam lithography has been in mask making. Despite the inherently high spatial resolution and wide process margins of electron beam lithography, the writing rate for semiconductor wafers has been too slow to be economically viable on a large scale. In the late 1970's, variable shape electron beam writing was developed, projecting a rectangular beam whose size can be varied for each "shot" exposure of a particular pattern, allowing some integrated circuits to be made economically where a variety of "customized" patterns are desired. In the cell or block projection electron beam exposure technique, a unit cell of a repetitive pattern is projected repeatedly to increase the level of parallelism. This can work well for highly repetitive patterns such as memory chips but is not well suited to complex varying patterns such as microprocessors. The rapid progress in the performance of integrated circuits has been largely driven by progress in optical lithography, through improvements in lens design and fabrication as well as the use of shorter wavelengths for the exposure radiation. Due to limitations from the opacity of lens and mask materials, it is unlikely that conventional optical printing methods can be used at wavelengths below 193 nm or feature sizes much below 180 nm. One candidate technology for a post-optical era is the Scattering with Angular Limitation Projection Electron-beam Lithography (SCALPEL) approach, which combines the high resolution and wide process latitude inherent in electron beam lithography with the throughput of a parallel projection system. A mask consisting of a low atomic number membrane and a high atomic number pattern layer is uniformly illuminated with high energy (100 ke

  16. Electron scattering from tetrahydrofuran

    International Nuclear Information System (INIS)

    Fuss, M C; Sanz, A G; García, G; Muñoz, A; Oller, J C; Blanco, F; Do, T P T; Brunger, M J; Almeida, D; Limão-Vieira, P

    2012-01-01

    Electron scattering from Tetrahydrofuran (C 4 H 8 O) was investigated over a wide range of energies. Following a mixed experimental and theoretical approach, total scattering, elastic scattering and ionization cross sections as well as electron energy loss distributions were obtained.

  17. Electronically Controlled Resistor Bank

    Science.gov (United States)

    Ross, Walter L.

    1987-01-01

    Resistance quickly varied in small steps over wide range. Device with no moving parts provides variable electrical resistance. Used with analog or digital circuity to provide electronic selection of large number of resistance values for testing, simulation, control, or other purposes. Nearest electromechanical equivalent of all-electronic device is potentiometer driven by servomotor.

  18. Advances in Opto Electronics

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Advances in Opto Electronics. Optoelectronics is where electronics was 15 years back. All Optical Amplifiers and Semiconductor Amplifiers. Fastest Semiconductor (InP) switch is at 170GHz- where is terrabit ? MEMS based switches that route traffic at wavelength level ...

  19. Radiative electron capture

    International Nuclear Information System (INIS)

    Biggerstaff, J.A.; Appleton, B.R.; Datz, S.; Moak, C.D.; Neelavathi, V.N.; Noggle, T.S.; Ritchie, R.H.; VerBeek, H.

    1975-01-01

    Some data are presented for radiative electron capture by fast moving ions. The radiative electron capture spectrum is shown for O 8+ in Ag, along with the energy dependence of the capture cross-section. A discrepancy between earlier data, theoretical prediction, and the present data is pointed out. (3 figs) (U.S.)

  20. Physics and Electronics

    Science.gov (United States)

    2012-03-05

    Optoelectronics, Nanoelectronics, Terahertz Light Sources • Dr. Gernot Pomrenke •Multi-Modal Sensing • Dr. Kitt Reinhardt • GHz-THz Speed Electronics...systems & non-linear dynamics for counter DEW Complex electronics and fundamental quantum processes •new superconductors for power •non-linear

  1. Basic Electronics I.

    Science.gov (United States)

    Robertson, L. Paul

    Designed for use in basic electronics programs, this curriculum guide is comprised of twenty-nine units of instruction in five major content areas: Orientation, Basic Principles of Electricity/Electronics, Fundamentals of Direct Current, Fundamentals of Alternating Current, and Applying for a Job. Each instructional unit includes some or all of…

  2. Electron pairing without superconductivity

    Science.gov (United States)

    Levy, Jeremy

    Strontium titanate (SrTiO3) is the first and best known superconducting semiconductor. It exhibits an extremely low carrier density threshold for superconductivity, and possesses a phase diagram similar to that of high-temperature superconductors--two factors that suggest an unconventional pairing mechanism. Despite sustained interest for 50 years, direct experimental insight into the nature of electron pairing in SrTiO3 has remained elusive. Here we perform transport experiments with nanowire-based single-electron transistors at the interface between SrTiO3 and a thin layer of lanthanum aluminate, LaAlO3. Electrostatic gating reveals a series of two-electron conductance resonances--paired electron states--that bifurcate above a critical pairing field Bp of about 1-4 tesla, an order of magnitude larger than the superconducting critical magnetic field. For magnetic fields below Bp, these resonances are insensitive to the applied magnetic field; for fields in excess of Bp, the resonances exhibit a linear Zeeman-like energy splitting. Electron pairing is stable at temperatures as high as 900 millikelvin, well above the superconducting transition temperature (about 300 millikelvin). These experiments demonstrate the existence of a robust electronic phase in which electrons pair without forming a superconducting state. Key experimental signatures are captured by a model involving an attractive Hubbard interaction that describes real-space electron pairing as a precursor to superconductivity. Support from AFOSR, ONR, ARO, NSF, DOE and NSSEFF is gratefully acknowledged.

  3. Electron transfer in proteins

    DEFF Research Database (Denmark)

    Farver, O; Pecht, I

    1991-01-01

    Electron migration between and within proteins is one of the most prevalent forms of biological energy conversion processes. Electron transfer reactions take place between active centers such as transition metal ions or organic cofactors over considerable distances at fast rates and with remarkable...

  4. Electron tunneling in chemistry

    International Nuclear Information System (INIS)

    Zamaraev, K.I.; Khajrutdinov, R.F.; Zhdanov, V.P.; Molin, Yu.N.

    1985-01-01

    Results of experimental and theoretical investigations are outlined systematically on electron tunnelling in chemical reactions. Mechanism of electron transport to great distances is shown to be characteristic to chemical compounds of a wide range. The function of tunnel reactions is discussed for various fields of chemistry, including radiation chemistry, electrochemistry, chemistry of solids, chemistry of surface and catalysis

  5. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  6. Recycling of electronic scrap

    DEFF Research Database (Denmark)

    Legarth, Jens Brøbech

    This Ph.D. thesis deals with the growingly important field of electronics recycling with special attention to the problem of printed circuit board recycling. A literature survey of contemporary electronics recycling and printed circuit board recycling is presented.Further, an analysis of the role...

  7. Managing electronic records

    CERN Document Server

    McLeod, Julie

    2005-01-01

    For records management courses, this book covers the theory and practice of managing electronic records as business and information assets. It focuses on the strategies, systems and procedures necessary to ensure that electronic records are appropriately created, captured, organized and retained over time to meet business and legal requirements.

  8. Electron scattering violates parity

    CERN Multimedia

    2004-01-01

    Parity violation has been observed in collisions between electrons at the Stanford Linear Accelerator Center (SLAC) in the US. The resuls, which are in agreement with the Stanford Model of particle physics, also provide a new measurement of the weak charge of the electron (½ page)

  9. Electrons in Molecules

    Indian Academy of Sciences (India)

    “What are electrons doing in molecules?” This is a deceptively simple question that scientists have been trying to answer for more than eighty years. With the advent of quantum mechanics in 1926, it became clear that we must understand the dynamics of electronic motion in atoms, molecules and solids in order to explain ...

  10. INDRA. Electronic Architecture

    International Nuclear Information System (INIS)

    Ganil Team.

    1993-01-01

    The INDRA multidetector electronics is described. The system is a set of 17 rings consisting of 96 ionization chambers and 180 silicon detectors plus 324 cesium iodide and 12 Phoswich scintillators. Their integrated electronic lines, the trigger modules, the control and data acquisition units are presented briefly. (R.P.) 6 figs

  11. Practical electronics for inventors

    CERN Document Server

    Scherz, Paul

    2013-01-01

    Spark your creativity and gain the electronics skills required to transform your innovative ideas into functioning gadgets. This hands-on, updated guide outlines electrical principles and provides thorough, easy-to-follow instructions, schematics, and illustrations. Findout how to select components, safely assemble circuits, perform error tests, and build plug-and-play prototypes. Practical Electronics for Inventors, Third Edition, features all-new chapters on sensors, microcontrollers, modular electronics, and the latest software tools. Coverage includes: Resistors, capacitors, inductors, and transformers Diodes, transistors, and integrated circuits Optoelectronics, solar cells, and phototransistors Sensors, GPS modules, and touch screens Op amps, regulators, and power supplies Digital electronics, LCD displays, and logic gates Microcontrollers and prototyping platforms, including Arduino DC motors, RC servos, and stepper motors Microphones, audio amps, and speakers Modular electronics and prototyping.

  12. The Hydrated Electron

    Science.gov (United States)

    Herbert, John M.; Coons, Marc P.

    2017-05-01

    Existence of a hydrated electron as a byproduct of water radiolysis was established more than 50 years ago, yet this species continues to attract significant attention due to its role in radiation chemistry, including DNA damage, and because questions persist regarding its detailed structure. This work provides an overview of what is known in regards to the structure and spectroscopy of the hydrated electron, both in liquid water and in clusters [Formula: see text], the latter of which provide model systems for how water networks accommodate an excess electron. In clusters, the existence of both surface-bound and internally bound states of the excess electron has elicited much debate, whereas in bulk water there are questions regarding how best to understand the structure of the excess electron's spin density. The energetics of the equilibrium species e-(aq) and its excited states, in bulk water and at the air/water interface, are also addressed.

  13. Electronically cloaked nanoparticles

    Science.gov (United States)

    Shen, Wenqing

    The concept of electronic cloaking is to design objects invisible to conduction electrons. The approach of electronic cloaking has been recently suggested to design invisible nanoparticle dopants with electronic scattering cross section smaller than 1% of the physical cross section (pi a2), and therefore to enhance the carrier mobility of bulk materials. The proposed nanoparticles have core-shell structures. The dopants are incorporated inside the core, while the shell layer serves both as a spacer to separate the charge carriers from their parent atoms and as a cloaking shell to minimize the scattering cross section of the electrons from the ionized nanoparticles. Thermoelectric materials are usually highly doped to have enough carrier density. Using invisible dopants could achieve larger thermoelectric power factors by enhancing the electronic mobility. Core-shell nanoparticles show an advantage over one-layer nanoparticles, which are proposed in three-dimensional modulation doping. However designing such nanoparticles is not easy as there are too many parameters to be considered. This thesis first shows an approach to design hollow nanoparticles by applying constrains on variables. In the second part, a simple mapping approach is introduced where one can identify possible core-shell particles by comparing the dimensionless parameters of chosen materials with provided maps. In both parts of this work, several designs with realistic materials were made and proven to achieve electronic cloaking. Improvement in the thermoelectric power factor compared to the traditional impurity doping method was demonstrated in several cases.

  14. Coherent electron cooling

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko,V.

    2009-05-04

    Cooling intense high-energy hadron beams remains a major challenge in modern accelerator physics. Synchrotron radiation is still too feeble, while the efficiency of two other cooling methods, stochastic and electron, falls rapidly either at high bunch intensities (i.e. stochastic of protons) or at high energies (e-cooling). In this talk a specific scheme of a unique cooling technique, Coherent Electron Cooling, will be discussed. The idea of coherent electron cooling using electron beam instabilities was suggested by Derbenev in the early 1980s, but the scheme presented in this talk, with cooling times under an hour for 7 TeV protons in the LHC, would be possible only with present-day accelerator technology. This talk will discuss the principles and the main limitations of the Coherent Electron Cooling process. The talk will describe the main system components, based on a high-gain free electron laser driven by an energy recovery linac, and will present some numerical examples for ions and protons in RHIC and the LHC and for electron-hadron options for these colliders. BNL plans a demonstration of the idea in the near future.

  15. Dose calculation for electrons

    International Nuclear Information System (INIS)

    Hirayama, Hideo

    1995-01-01

    The joint working group of ICRP/ICRU is advancing the works of reviewing the ICRP publication 51 by investigating the data related to radiation protection. In order to introduce the 1990 recommendation, it has been demanded to carry out calculation for neutrons, photons and electrons. As for electrons, EURADOS WG4 (Numerical Dosimetry) rearranged the data to be calculated at the meeting held in PTB Braunschweig in June, 1992, and the question and request were presented by Dr. J.L. Chartier, the responsible person, to the researchers who are likely to undertake electron transport Monte Carlo calculation. The author also has carried out the requested calculation as it was the good chance to do the mutual comparison among various computation codes regarding electron transport calculation. The content that the WG requested to calculate was the absorbed dose at depth d mm when parallel electron beam enters at angle α into flat plate phantoms of PMMA, water and ICRU4-element tissue, which were placed in vacuum. The calculation was carried out by the versatile electron-photon shower computation Monte Carlo code, EGS4. As the results, depth dose curves and the dependence of absorbed dose on electron energy, incident angle and material are reported. The subjects to be investigated are pointed out. (K.I.)

  16. Electron Cooling of RHIC

    International Nuclear Information System (INIS)

    Ben-Zvi, I.; Barton, D.S.; Beavis, D.B.; Blaskiewicz, M.; Brennan, J.M.; Burrill, A.; Calaga, R.; Cameron, P.; Chang, X.Y.; Connolly, R.; Eidelman, Yu.I.; Fedotov, A.V.; Fischer, W.; Gassner, D.M.; Hahn, H.; Harrison, M.; Hershcovitch, A.; Hseuh, H.-C.; Jain, A.K.; Johnson, P.D.J.; Kayran, D.; Kewisch, J.; Lambiase, R.F.; Litvinenko, V.; MacKay, W.W.; Mahler, G.J.; Malitsky, N.; McIntyre, G.T.; Meng, W.; Mirabella, K.A.M.; Montag, C.; Nehring, T.C.N.; Nicoletti, T.; Oerter, B.; Parzen, G.; Pate, D.; Rank, J.; Rao, T.; Roser, T.; Russo, T.; Scaduto, J.; Smith, K.; Trbojevic, D.; Wang, G.; Wei, J.; Williams, N.W.W.; Wu, K.-C.; Yakimenko, V.; Zaltsman, A.; Zhao, Y.; Abell, D.T.; Bruhwiler, D.L.; Bluem, H.; Burger, A.; Cole, M.D.; Favale, A.J.; Holmes, D.; Rathke, J.; Schultheiss, T.; Todd, A.M.M.; Burov, A.V.; Nagaitsev, S.; Delayen, J.R.; Derbenev, Y.S.; Funk, L. W.; Kneisel, P.; Merminga, L.; Phillips, H.L.; Preble, J.P.; Koop, I.; Parkhomchuk, V.V.; Shatunov, Y.M.; Skrinsky, A.N.; Koop, I.; Parkhomchuk, V.V.; Shatunov, Y.M.; Skrinsky, A.N.; Sekutowicz, J.S.

    2005-01-01

    We report progress on the R and D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R and D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/

  17. Electron Cooling of RHIC

    Energy Technology Data Exchange (ETDEWEB)

    I. Ben-Zvi; D.S. Barton; D.B. Beavis; M. Blaskiewicz; J.M. Brennan; A. Burrill; R. Calaga; P. Cameron; X.Y. Chang; R. Connolly; Yu.I. Eidelman; A.V. Fedotov; W. Fischer; D.M. Gassner; H. Hahn; M. Harrison; A. Hershcovitch; H.-C. Hseuh; A.K. Jain; P.D.J. Johnson; D. Kayran; J. Kewisch; R.F. Lambiase; V. Litvinenko; W.W. MacKay; G.J. Mahler; N. Malitsky; G.T. McIntyre; W. Meng; K.A.M. Mirabella; C. Montag; T.C.N. Nehring; T. Nicoletti; B. Oerter; G. Parzen; D. Pate; J. Rank; T. Rao; T. Roser; T. Russo; J. Scaduto; K. Smith; D. Trbojevic; G. Wang; J. Wei; N.W.W. Williams; K.-C. Wu; V. Yakimenko; A. Zaltsman; Y. Zhao; D.T. Abell; D.L. Bruhwiler; H. Bluem; A. Burger; M.D. Cole; A.J. Favale; D. Holmes; J. Rathke; T. Schultheiss; A.M.M. Todd; A.V. Burov; S. Nagaitsev; J.R. Delayen; Y.S. Derbenev; L. W. Funk; P. Kneisel; L. Merminga; H.L. Phillips; J.P. Preble; I. Koop; V.V. Parkhomchuk; Y.M. Shatunov; A.N. Skrinsky; I. Koop; V.V. Parkhomchuk; Y.M. Shatunov; A.N. Skrinsky; J.S. Sekutowicz

    2005-05-16

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/.

  18. Electron Cooling of RHIC

    CERN Document Server

    Ben-Zvi, Ilan; Barton, Donald; Beavis, Dana; Blaskiewicz, Michael; Bluem, Hans; Brennan, Joseph M; Bruhwiler, David L; Burger, Al; Burov, Alexey; Burrill, Andrew; Calaga, Rama; Cameron, Peter; Chang, Xiangyun; Cole, Michael; Connolly, Roger; Delayen, Jean R; Derbenev, Yaroslav S; Eidelman, Yury I; Favale, Anthony; Fedotov, Alexei V; Fischer, Wolfram; Funk, L W; Gassner, David M; Hahn, Harald; Harrison, Michael; Hershcovitch, Ady; Holmes, Douglas; Hseuh Hsiao Chaun; Johnson, Peter; Kayran, Dmitry; Kewisch, Jorg; Kneisel, Peter; Koop, Ivan; Lambiase, Robert; Litvinenko, Vladimir N; MacKay, William W; Mahler, George; Malitsky, Nikolay; McIntyre, Gary; Meng, Wuzheng; Merminga, Lia; Meshkov, Igor; Mirabella, Kerry; Montag, Christoph; Nagaitsev, Sergei; Nehring, Thomas; Nicoletti, Tony; Oerter, Brian; Parkhomchuk, Vasily; Parzen, George; Pate, David; Phillips, Larry; Preble, Joseph P; Rank, Jim; Rao, Triveni; Rathke, John; Roser, Thomas; Russo, Thomas; Scaduto, Joseph; Schultheiss, Tom; Sekutowicz, Jacek; Shatunov, Yuri; Sidorin, Anatoly O; Skrinsky, Aleksander Nikolayevich; Smirnov, Alexander V; Smith, Kevin T; Todd, Alan M M; Trbojevic, Dejan; Troubnikov, Grigory; Wang, Gang; Wei, Jie; Williams, Neville; Wu, Kuo-Chen; Yakimenko, Vitaly; Zaltsman, Alex; Zhao, Yongxiang; ain, Animesh K

    2005-01-01

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.ags...

  19. Effectiveness of Vegetated Drainage Ditches for Domestic Sewage Effluent Mitigation.

    Science.gov (United States)

    Kumwimba, Mathieu Nsenga; Zhu, Bo

    2017-05-01

    Plant species have an important role in eco-ditches; however, the Michaelis-Menten kinetic parameters of nutrient uptake, growth rate and purification efficiency of ditch plants and their influences on domestic sewage treatment efficiency are still unclear. Growth rates of all nine species, but especially Lemna gibba, Cladophora and Myriophyllum verticillatum were best in undiluted domestic sewage as opposed to a mixture of domestic sewage. Performance of species to accumulate nutrients was not only species-specific, but was also affected by both sewage treatments. Removal efficiency of nutrients was dependent on both plant species and treatment. Uptake kinetic parameters were significantly affected by both nutrient form and plant species. The maximum uptake rate (Vmax) of NH 4 -N was higher than NO 3 -N. Similarly, Km values for NH 4 -N were greater than NO 3 -N. These results could be used to identify plants for sewage treatment efficiency and enhance water quality in eco-ditch treatment systems.

  20. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1968-01-01

    Electronic Devices and Circuits, Volume 1 deals with the design and applications of electronic devices and circuits such as passive components, diodes, triodes and transistors, rectification and power supplies, amplifying circuits, electronic instruments, and oscillators. These topics are supported with introductory network theory and physics. This volume is comprised of nine chapters and begins by explaining the operation of resistive, inductive, and capacitive elements in direct and alternating current circuits. The theory for some of the expressions quoted in later chapters is presented. Th

  1. Microscopy with slow electrons

    International Nuclear Information System (INIS)

    Frank, L.; Muellerova, I.; Delong, A.

    1994-01-01

    Low energy microscopy is treated as the low energy limit of electron microscopy as a whole in all its basic branches, i.e., the emission, transmission and scanning microscopy. The instrumental and methodological aspects are briefly discussed. They include the interaction of electrons with a solid, the contrast formation mechanisms, the instrumentation problems, and actual progress achieved in all three types of microscopy from the point of view of lowering the energy of electrons, impacting or leaving the specimen, down to the low energy range below 5 keV and the very low energy range below 50 eV. (author) 62 refs., 27 figs., 3 tabs

  2. Semiconductor opto-electronics

    CERN Document Server

    Moss, TS; Ellis, B

    1972-01-01

    Semiconductor Opto-Electronics focuses on opto-electronics, covering the basic physical phenomena and device behavior that arise from the interaction between electromagnetic radiation and electrons in a solid. The first nine chapters of this book are devoted to theoretical topics, discussing the interaction of electromagnetic waves with solids, dispersion theory and absorption processes, magneto-optical effects, and non-linear phenomena. Theories of photo-effects and photo-detectors are treated in detail, including the theories of radiation generation and the behavior of semiconductor lasers a

  3. Free-electron lasers

    International Nuclear Information System (INIS)

    Brau, C.A.

    1990-01-01

    Free-electron lasers represent an altogether new and exciting class of coherent optical sources. Making use of a simple and elegant gain medium - an electron beam in a magnetic field - they have already demonstrated broad wavelength tunability and excellent optical-beam quality. For the future they offer the possibility of generating the greatest focused power ever achieved by a laser. But even before this is achieved, the unique advantages of free-electron lasers, especially their tunability, will make them useful for a variety of important applications in science, medicine, and industry. (author)

  4. Consulting in Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Florentina Loredana Tache

    2010-10-01

    Full Text Available Economic development of electronic services provide advice and many agents of existingreferral systems to recommend and provide products, information and customized views of thecommunity through a personalized interaction in real time. Distributed systems of autonomous agentsare becoming increasingly important in electronic comet because the basic decisions of agents adviceon trust and reputation are taken in a similar way human society. If these decisions will be as a realconsumer protection, when new aspects of online consumer legislation will become usefulinformation in advice and consulting of electronic commerce.

  5. Electronic components and systems

    CERN Document Server

    Dennis, W H

    2013-01-01

    Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to kn

  6. Principles of quantum electronics

    CERN Document Server

    Marcuse, Dietrich

    1980-01-01

    Principles of Quantum Electronics focuses on the concept of quantum electronics as the application of quantum theory to engineering problems. It examines the principles that govern specific quantum electronics devices and presents their theoretical applications to typical problems. Comprised of 10 chapters, this book starts with an overview of the Dirac formulation of quantum mechanics. This text then considers the derivation of the formalism of field quantization and discusses the properties of photons and phonons. Other chapters examine the interaction between the electromagnetic field and c

  7. Electron paramagnetic resonance

    CERN Document Server

    Al'tshuler, S A

    2013-01-01

    Electron Paramagnetic Resonance is a comprehensive text on the field of electron paramagnetic resonance, covering both the theoretical background and the results of experiment. This book is composed of eight chapters that cover theoretical materials and experimental data on ionic crystals, since these are the materials that have been most extensively studied by the methods of paramagnetic resonance. The opening chapters provide an introduction to the basic principles of electron paramagnetic resonance and the methods of its measurement. The next chapters are devoted to the theory of spectra an

  8. Polarized electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Prepost, R. [Univ. of Wisconsin, Madison, WI (United States)

    1994-12-01

    The fundamentals of polarized electron sources are described with particular application to the Stanford Linear Accelerator Center. The SLAC polarized electron source is based on the principle of polarized photoemission from Gallium Arsenide. Recent developments using epitaxially grown, strained Gallium Arsenide cathodes have made it possible to obtain electron polarization significantly in excess of the conventional 50% polarization limit. The basic principles for Gallium and Arsenide polarized photoemitters are reviewed, and the extension of the basic technique to strained cathode structures is described. Results from laboratory measurements of strained photocathodes as well as operational results from the SLAC polarized source are presented.

  9. VLSI electronics microstructure science

    CERN Document Server

    1982-01-01

    VLSI Electronics: Microstructure Science, Volume 4 reviews trends for the future of very large scale integration (VLSI) electronics and the scientific base that supports its development.This book discusses the silicon-on-insulator for VLSI and VHSIC, X-ray lithography, and transient response of electron transport in GaAs using the Monte Carlo method. The technology and manufacturing of high-density magnetic-bubble memories, metallic superlattices, challenge of education for VLSI, and impact of VLSI on medical signal processing are also elaborated. This text likewise covers the impact of VLSI t

  10. Field emission electronics

    CERN Document Server

    Egorov, Nikolay

    2017-01-01

    This book is dedicated to field emission electronics, a promising field at the interface between “classic” vacuum electronics and nanotechnology. In addition to theoretical models, it includes detailed descriptions of experimental and research techniques and production technologies for different types of field emitters based on various construction principles. It particularly focuses on research into and production of field cathodes and electron guns using recently developed nanomaterials and carbon nanotubes. Further, it discusses the applications of field emission cathodes in new technologies such as light sources, flat screens, microwave and X-ray devices.

  11. Modern dictionary of electronics

    CERN Document Server

    Graf, Rudolf F

    1999-01-01

    Included in this fully revised classic are well over 28,000 terms, phrases, acronyms, and abbreviations from the ever-expanding worlds of consumer electronics, optics, microelectronics, computers, communications, and medical electronics. From the basic elements of theory to the most cutting-edge circuit technology, this book explains it all in both words and pictures.For easy reference, the author has provided definitions for standard abbreviations and equations as well as tables of SI (International System of Units) units, measurements, and schematic symbolsModern Dictionary of Electronics is

  12. Single Electron Tunneling

    International Nuclear Information System (INIS)

    Ruggiero, Steven T.

    2005-01-01

    Financial support for this project has led to advances in the science of single-electron phenomena. Our group reported the first observation of the so-called ''Coulomb Staircase'', which was produced by tunneling into ultra-small metal particles. This work showed well-defined tunneling voltage steps of width e/C and height e/RC, demonstrating tunneling quantized on the single-electron level. This work was published in a now well-cited Physical Review Letter. Single-electron physics is now a major sub-field of condensed-matter physics, and fundamental work in the area continues to be conducted by tunneling in ultra-small metal particles. In addition, there are now single-electron transistors that add a controlling gate to modulate the charge on ultra-small photolithographically defined capacitive elements. Single-electron transistors are now at the heart of at least one experimental quantum-computer element, and single-electron transistor pumps may soon be used to define fundamental quantities such as the farad (capacitance) and the ampere (current). Novel computer technology based on single-electron quantum dots is also being developed. In related work, our group played the leading role in the explanation of experimental results observed during the initial phases of tunneling experiments with the high-temperature superconductors. When so-called ''multiple-gap'' tunneling was reported, the phenomenon was correctly identified by our group as single-electron tunneling in small grains in the material. The main focus throughout this project has been to explore single electron phenomena both in traditional tunneling formats of the type metal/insulator/particles/insulator/metal and using scanning tunneling microscopy to probe few-particle systems. This has been done under varying conditions of temperature, applied magnetic field, and with different materials systems. These have included metals, semi-metals, and superconductors. Amongst a number of results, we have

  13. Electron collisions with biomolecules

    International Nuclear Information System (INIS)

    McKoy, V; Winstead, C

    2008-01-01

    We report on results of recent studies of collisions of low-energy electrons with nucleobases and other DNA constituents. A particular focus of these studies has been the identification and characterization of resonances that play a role in electron attachment leading to strand breaks in DNA. Comparison of the calculated resonance positions with results of electron transmission measurements is quite encouraging. However, the higher-lying π* resonances of the nucleobases appear to be of mixed elastic and core-excited character. Such resonant channel coupling raises the interesting possibility that the higher π*resonances in the nucleobases may promote dissociation of DNA by providing doorway states to triplet excited states.

  14. Quantum electronics basic theory

    CERN Document Server

    Fain, V M; Sanders, J H

    1969-01-01

    Quantum Electronics, Volume 1: Basic Theory is a condensed and generalized description of the many research and rapid progress done on the subject. It is translated from the Russian language. The volume describes the basic theory of quantum electronics, and shows how the concepts and equations followed in quantum electronics arise from the basic principles of theoretical physics. The book then briefly discusses the interaction of an electromagnetic field with matter. The text also covers the quantum theory of relaxation process when a quantum system approaches an equilibrium state, and explai

  15. Coding for Electronic Mail

    Science.gov (United States)

    Rice, R. F.; Lee, J. J.

    1986-01-01

    Scheme for coding facsimile messages promises to reduce data transmission requirements to one-tenth current level. Coding scheme paves way for true electronic mail in which handwritten, typed, or printed messages or diagrams sent virtually instantaneously - between buildings or between continents. Scheme, called Universal System for Efficient Electronic Mail (USEEM), uses unsupervised character recognition and adaptive noiseless coding of text. Image quality of resulting delivered messages improved over messages transmitted by conventional coding. Coding scheme compatible with direct-entry electronic mail as well as facsimile reproduction. Text transmitted in this scheme automatically translated to word-processor form.

  16. Potential of macrophytes for removing atrazine from aqueous solution Potencial de macrófitas para remoção de atrazine de solução aquosa

    Directory of Open Access Journals (Sweden)

    F.P Guimarães

    2011-01-01

    Full Text Available The potential of three macrophytes, Azolla caroliniana, Salvinia minima, and Lemna gibba was assessed in this study to select plants for use in environmental remediation contaminated with atrazine. Experiments were carried out in a greenhouse over six days in pots containing Hoagland 0.25 strength nutritive solution at the following atrazine concentrations: 0; 0.01; 0.1; 1.0; 10.0 mg L-1. Decrease in biomass accumulation was observed in the three macrophytes, as well as toxic effects evidenced by the symptomatology developed by the plants which caused their deaths. The chlorosis and necrosis allowed to observe in the plants the high sensitivity of the three species to the herbicide. Plants presented low potential for removal of atrazine in solution when exposed to low concentrations of the herbicide. However, at the 10.0 mg L-1 atrazine concentration, L. gibba and A. caroliniana showed potential to remove the herbicide from the solution (0.016 and 0.018 mg atrazine per fresh mass gram, respectively. This fact likely resulted from the processes of atrazine adsorption by the dead material. The percentage of atrazine removed from the solution by the plants decreased when the plants were exposed to high concentrations of the pollutant. Azolla caroliniana, S. minima, and L. gibba were not effective in removing the herbicide from solution. The use of these species to remedy aquatic environments was shown to be limited.Avaliou-se, neste estudo, o potencial de três macrófitas - Azolla caroliniana, Salvinia minima e Lemna gibba - com vistas à seleção de plantas para remediação de ambientes contaminados por atrazine. Foram realizados experimentos em casa de vegetação durante seis dias, em vasos contendo solução nutritiva Hoagland (0,25 de força iônica, nas seguintes concentrações de atrazine: 0; 0,01; 0,1; 1,0; e 10,0 mg L-1. A redução da biomassa acumulada pelas macrófitas foi observada, bem como os efeitos de toxidez evidenciados pela

  17. The art of electronics

    CERN Document Server

    Horowitz, Paul

    2015-01-01

    At long last, here is the thoroughly revised and updated third edition of the hugely successful Art of Electronics. It is widely accepted as the best single authoritative book on electronic circuit design. In addition to new or enhanced coverage of many topics, the Third Edition includes: 90 oscilloscope screenshots illustrating the behavior of working circuits; dozens of graphs giving highly useful measured data of the sort that's often buried or omitted in datasheets but which you need when designing circuits; 80 tables (listing some 1650 active components), enabling intelligent choice of circuit components by listing essential characteristics (both specified and measured) of available parts. The new Art of Electronics ​​retains the feeling of informality and easy access that helped make the earlier editions so successful and popular. It is an indispensable reference and the gold standard​​ for anyone, student or researcher, professional or amateur, who works with electronic circuits.

  18. Electron capture and loss

    International Nuclear Information System (INIS)

    Horsdal Pedersen, E.

    1978-01-01

    Two limiting cases of electron capture leading to the formation of heavy ions with inner-shell vacancies are discussed. The first case is electron capture by fast (v>v 0 ) light ions in heavy targets. This process results, with a large probability, in the formation of inner-shell vacancies in the target. The second case is electron capture by, highly heavy charged ions in light targets, resulting in fast beam particles with K-shell vacancies which decay by means of polarised x rays. It is possible to get a quantitative understanding of the importance of capture from inner shells of the target in fast collisions between light projectiles and heavy targets and of the polarisation of x rays following electron capture by heavy, highly charged particles in light targets by a consideration of the matrix element in the Brinkman-Kramers approximation. (JIW)

  19. Electronics Modernization Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Current electronic packaging designs used in our most recent spacecraft are comprised of technologies from the 1980’s and 1990’s. The current approach...

  20. High brightness electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, R.L.

    1995-07-01

    High energy physics accelerators and free electron lasers put increased demands on the electron beam sources. This paper describes the present research on attaining intense bright electron beams using photoinjectors. Recent results from the experimental programs will be given. The performance advantages and difficulties presently faced by researchers will be discussed, and the following topics will be covered. Progress has been made in photocathode materials, both in lifetime and quantum efficiency. Cesium telluride has demonstrated significantly longer lifetimes than cesium antimonide at 10{sup {minus}8} torr. However, the laser system is more difficult because cesium telluride requires quadrupled YLF instead of the doubled YLF required for cesium antimonide. The difficulty in using photoinjectors is primarily the drive laser, in particular the amplitude stability. Finally, emittance measurements of photoinjector systems can be complicated by the non-thermal nature of the electron beam. An example of the difficulty in measuring beam emittance is given.

  1. Electron beam curing paint

    International Nuclear Information System (INIS)

    Maruyama, Tsutomu

    1991-04-01

    Electron beam curing (EBC) type paint is paint that is specially prepared so that it can be cured and dried by electron beam irradiation. Electron beam irradiation achieves hardly any curing and drying of ordinary normal-temperature drying type paint or heat-drying type paint. The main type of paint in which an electron beam produces a curing reaction is one in which a radical polymerization reaction takes place under irradiation. The use of this EBC painting - drying system has been considered for a variety of fields since it has a number of special features such as the fact that the paint dries instantaneously, no heat is applied and no solvent is used. (Author)

  2. Electronics for guitarists

    CERN Document Server

    Dailey, Denton J

    2014-01-01

    Electronics for Guitarists focuses on analog circuitry, and is written for the guitarist interested in transistor and vacuum tube-based amplifiers. Topics include discrete transistors and diodes, classical filter circuits, and vacuum tube-based amplifiers.

  3. Advances in electron dosimetry

    International Nuclear Information System (INIS)

    Harder, D.

    1980-04-01

    Starting from the two most important interactions of electrons with matter, energy loss and scattering, a review is given of a number of effects which are important in electron dosimetry. For determining the absorbed dose in a phantom by means of ionization chambers, imformation is required on the electron spectrum at the location of the measurement, on the stopping powers of different materials and on disturbances such as the displacement of the effective point of measurements from the centre of the chamber. By means of figures and photographs of electron traces in bubble chambers, the origin of the formation of the absorbed dose maximum in a phantom is explained. It is shown, how by multiple scattering, the similarity of dose distributions in different media can be explained and how by Monte-Carlo calculations absorbed dose distributions in the surroundings of inhomogeneities (e.g. cavities) in a phantom can be determined. (orig.) [de

  4. Electron linac injector developments

    International Nuclear Information System (INIS)

    Fraser, J.S.

    1986-01-01

    There is a continuing demand for improved injectors for electron linacs. Free-electron laser (FEL) oscillators require pulse trains of high brightness and, in some applications, high average power at the same time. Wakefield-accelerator and laser-acceleration experiments require isolated bunches of high peak brightness. Experiments with alkali-halide photoemissive and thermionic electron sources in rf cavities for injector applications are described. For isolated pulses, metal photocathodes (illuminated by intense laser pulses) are being employed. Reduced emittance growth in high-peak-current electron injectors may be achieved by linearizing the cavity electric field's radial component and by using high field strengths at the expense of lower shunt impedance. Harmonically excited cavities have been proposed for enlarging the phase acceptance of linac cavities and thereby reducing the energy spread produced in the acceleration process. Operation of injector linacs at a subharmonic of the main linac frequency is also proposed for enlarging the phase acceptance

  5. Introduction to electron crystallography.

    Science.gov (United States)

    Kühlbrandt, Werner

    2013-01-01

    From the earliest work on regular arrays in negative stain, electron crystallography has contributed greatly to our understanding of the structure and function of biological macromolecules. The development of electron cryo-microscopy (cryo-EM) then lead to the first groundbreaking atomic models of the membrane proteins bacteriorhodopsin and light harvesting complex II within lipid bilayers. Key contributions towards cryo-EM and electron crystallography methods included specimen preparation and vitrification, liquid-helium cooling, data collection, and image processing. These methods are now applied almost routinely to both membrane and soluble proteins. Here we outline the advances and the breakthroughs that paved the way towards high-resolution structures by electron crystallography, both in terms of methods development and biological milestones.

  6. Magnetic electron scattering

    International Nuclear Information System (INIS)

    Peterson, G.A.

    1989-01-01

    We briefly review some of the motivations, early results, and techniques of magnetic elastic and inelastic electron-nucleus scattering. We then discuss recent results, especially those acquired at high momentum transfers. 50 refs., 19 figs

  7. Elastic magnetic electron scattering

    International Nuclear Information System (INIS)

    Sick, I.

    1985-01-01

    The paper surveys the field of elastic magnetic electron scattering. Magnetic scattering as a configuration analyzer; magnetic form factors of high multipole order; absolute spectroscopic factors; and non-nucleonic constituents; are all discussed. (U.K.)

  8. Electronic personal dosemeters

    International Nuclear Information System (INIS)

    Marshall, T.O.; Bartlett, D.T.; Burgess, P.H.; Cranston, C.S.; Higginbottom, D.J.; Sutton, K.W.

    1990-01-01

    Personal dosimetry services approved by their national authorities for category A workers, invariably use passive dosemeters incorporating photographic film or thermoluminescent detectors. However, the performance characteristics of electronic dosemeters has improved substantially over the past decade to such an extent that in the opening lecture of the Solid State Dosimetry Conference at Oxford in 1986 the development of an electronic 'smart card' based on a silicon detector was briefly discussed. This idea has been taken up and at least one development programme is in progress aimed at the production of an electronic dosemeter suitable for use as a legal device. The more important performance requirements of personal dosemeters for this purpose are discussed and the earlier electronic dosemeter designs and the latest devices under development to meet this specification are compared. (author)

  9. ORELA electron guns

    International Nuclear Information System (INIS)

    Christian, O.W.; Lewis, T.A.

    1981-09-01

    The most recent information concerning the production and performance of ORELA electron guns is presented. Included are descriptions of procedures for gun fabrication, cathode conditioning and high voltage processing. Highlights of the performance characteristics are also included

  10. Scanning Auger Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — A JEOL model 7830F field emission source, scanning Auger microscope.Specifications / Capabilities:Ultra-high vacuum (UHV), electron gun range from 0.1 kV to 25 kV,...

  11. Electronic Falling Body Simulator

    Science.gov (United States)

    Goodman, John M.

    1975-01-01

    Describes an analog electronic simulator for the motion of an object projected horizontally in a vertical acceleration field. The device features adjustable values for the horizontal speeds and "gravity." Trajectories are displayed on an oscilloscope. (Author/CP)

  12. PNC - Electron linac concept

    International Nuclear Information System (INIS)

    Tani, S.; Nakamura, H.

    1997-01-01

    The possibility of using an electron accelerator for the transmutation of fission products, particularly Cs-137 and Sr-90, through photonuclear reactions is studied at the Power Reactor and Nuclear Fuel Development Corporation (PNC)

  13. Electron and Photon ID

    CERN Document Server

    Hryn'ova, Tetiana; The ATLAS collaboration

    2017-01-01

    The identification of prompt photons and the rejection of background coming mostly from photons from hadron decays relies on the high granularity of the ATLAS calorimeter. The electron identification used in ATLAS for run 2 is based on a likelihood discrimination to separate isolated electron candidates from candidates originating from photon conversions, hadron misidentification and heavy flavor decays. In addition, isolation variables are used as further handles to separate signal and background. Several methods are used to measure with data the efficiency of the photon identification requirements, to cover a broad energy spectrum. At low energy, photons from radiative Z decays are used. In the medium energy range, similarities between electrons and photon showers are exploited using Z->ee decays. At high energy, inclusive photon samples are used. The measurement of the efficiencies of the electron identification and isolation cuts are performed with the data using tag and probe techniques with large statis...

  14. Improved electron transport layer

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention provides: a method of preparing a coating ink for forming a zinc oxide electron transport layer, comprising mixing zinc acetate and a wetting agent in water or methanol; a coating ink comprising zinc acetate and a wetting agent in aqueous solution or methanolic solution......; a method of preparing a zinc oxide electron transporting layer, which method comprises: i) coating a substrate with the coating ink of the present invention to form a film; ii) drying the film; and iii) heating the dry film to convert the zinc acetate substantially to ZnO; a method of preparing an organic...... photovoltaic device or an organic LED having a zinc oxide electron transport layer, the method comprising, in this order: a) providing a substrate bearing a first electrode layer; b) forming an electron transport layer according to the following method: i) coating a coating ink comprising an ink according...

  15. Electronic Universal Vote

    Directory of Open Access Journals (Sweden)

    Cristian USCATU

    2008-01-01

    Full Text Available In the days of informational society everything is going online. Most aspects of our lives have online components. Since democracy is a big issue, it could not escape this trend. Governments themselves are moving to the online environment for the purpose of improving their internal efficiency and their availability to the citizens, businesses and other parties interested. Since governments are the result of elections, elections have also been touched by the electronic fever. New electronic voting solutions arise and each one brings new debates with many arguments in their favor and against them. Accessibility and ease of use leads the arguments in favor of electronic voting over the internet, while fear of fraud is the main reason people are avoiding electronics and clinging on classic paper ballots.

  16. PREFACE: Spin Electronics

    Science.gov (United States)

    Dieny, B.; Sousa, R.; Prejbeanu, L.

    2007-04-01

    Conventional electronics has in the past ignored the spin on the electron, however things began to change in 1988 with the discovery of giant magnetoresistance in metallic thin film stacks which led to the development of a new research area, so called spin-electronics. In the last 10 years, spin-electronics has achieved a number of breakthroughs from the point of view of both basic science and application. Materials research has led to several major discoveries: very large tunnel magnetoresistance effects in tunnel junctions with crystalline barriers due to a new spin-filtering mechanism associated with the spin-dependent symmetry of the electron wave functions new magnetic tunnelling barriers leading to spin-dependent tunnelling barrier heights and acting as spin-filters magnetic semiconductors with increasingly high ordering temperature. New phenomena have been predicted and observed: the possibility of acting on the magnetization of a magnetic nanostructure with a spin-polarized current. This effect, due to a transfer of angular momentum between the spin polarized conduction electrons and the local magnetization, can be viewed as the reciprocal of giant or tunnel magnetoresistance. It can be used to switch the magnetization of a magnetic nanostructure or to generate steady magnetic excitations in the system. the possibility of generating and manipulating spin current without charge current by creating non-equilibrium local accumulation of spin up or spin down electrons. The range of applications of spin electronics materials and phenomena is expanding: the first devices based on giant magnetoresistance were the magnetoresistive read-heads for computer disk drives. These heads, introduced in 1998 with current-in plane spin-valves, have evolved towards low resistance tunnel magnetoresistice heads in 2005. Besides magnetic recording technology, these very sensitive magnetoresistive sensors are finding applications in other areas, in particular in biology. magnetic

  17. Thermionics basic principles of electronics

    CERN Document Server

    Jenkins, J; Ashhurst, W

    2013-01-01

    Basic Principles of Electronics, Volume I : Thermionics serves as a textbook for students in physics. It focuses on thermionic devices. The book covers topics on electron dynamics, electron emission, and the themionic vacuum diode and triode. Power amplifiers, oscillators, and electronic measuring equipment are studied as well. The text will be of great use to physics and electronics students, and inventors.

  18. Electron attachment cross sections obtained from electron attachment spectroscopy

    International Nuclear Information System (INIS)

    Popp, P.; Baumbach, J.I.; Leonhardt, J.W.; Mothes, S.

    1988-01-01

    Electron capture detectors have a high sensitivity for substances with high thermal electron attachment cross sections. The electron attachment spectroscopy makes it possible to change the mean electron energy in such a way that the maximum for dissociative electron attachment is reached. Thus, best operation modes of the detection system as well as significant dependencies of electron attachment coefficients are available. Cross sections for electron attachment as a function of the electron energy are obtained with the knowledge of electron energy distribution functions from Boltzmann equation analysis by a special computer code. A disadvantage of this electron attachment spectroscopy is the superposition of space charge effects due to the decrease of the electron drift velocity with increasing mean electron energy. These influences are discussed. (author)

  19. ELECTRONIC BANKING AND ELECTRONIC COMMERCE IN SERBIA

    Directory of Open Access Journals (Sweden)

    Ivana B. Petrevska

    2014-10-01

    Full Text Available Nowadays, we may witness to dramatic and visible changes in our life environment. Business ambient for companies is different every day, and it is very hard to predict a direction of future changes. There is an environment characterized by sharp competition and increasing number of competitors, fast technological improvements and highly sophisticated and informed costumers. Technological process influences the humanity strongly, changing the way that people live, work and spend. Electronic commerce and electronic banking has become incontinent, and makes a great part of today's total transactions. There are an increasing number of companies that perform their business that way and make profit. Social networks are proven to be the least expensive way of information exchange, and they are present in almost every part of the world. The globalization has reached the most distant parts of the Earth. Every resistance to new technologies is dangerous and may lead to bankruptcy. Due to the EU expansion, Internet users are to be expected, and prosperity of the e-commerce business models at the same time. In Serbia, electronic commerce is present, but not as developed as in EU countries. E-commerce, however it might be successful throughout the world, it is somewhat slow in its growth in Serbia. The reasons are numerous, and main obstacles are the lack of trust, still limited usage of banking cards, avoiding of e-payments by older population etc. Also, the recent scandals over the misuse of personal data, and e-crime are discouraging factors for the growth of e-trade and ebanking. The younger generations are ever more ready to use e-commerce, since they are open to new technologies and do not have the defensive attitude towards it. E-commerce and e-banking has growing potential even among older population, if the society prevents them from fear and mistrust.

  20. ELECTRONIC BUSINESS IN BUSINESS

    OpenAIRE

    Lucian Constantin Gabriel Budacia; Elisabeta Andreea Budacia

    2008-01-01

    The management of a business in the digital economy is based on a management process called digital management. Business in the digital economy integrates information technologies and communications within its activities and may be partially or totally electronic. Management of the business is carried out using information systems that support for the substantiation and decisions. Business electronic involve a complete change in how the customer is viewed in relation to the organization; requ...

  1. Newnes electronics toolkit

    CERN Document Server

    Phillips, Geoff

    2013-01-01

    Newnes Electronics Toolkit brings together fundamental facts, concepts, and applications of electronic components and circuits, and presents them in a clear, concise, and unambiguous format, to provide a reference book for engineers. The book contains 10 chapters that discuss the following concepts: resistors, capacitors, inductors, semiconductors, circuit concepts, electromagnetic compatibility, sound, light, heat, and connections. The engineer's job does not end when the circuit diagram is completed; the design for the manufacturing process is just as important if volume production is to be

  2. Electrical and electronic principles

    CERN Document Server

    Knight, SA

    1988-01-01

    Electrical and Electronic Principles, 3 focuses on the principles involved in electrical and electronic circuits, including impedance, inductance, capacitance, and resistance.The book first deals with circuit elements and theorems, D.C. transients, and the series circuits of alternating current. Discussions focus on inductance and resistance in series, resistance and capacitance in series, power factor, impedance, circuit magnification, equation of charge, discharge of a capacitor, transfer of power, and decibels and attenuation. The manuscript then examines the parallel circuits of alternatin

  3. Electricity electron measurement

    International Nuclear Information System (INIS)

    Kim, Sang Jin; Sung, Rak Jin

    1985-11-01

    This book deals with measurement of electricity and electron. It is divided into fourteen chapters, which depicts basic of electricity measurement, unit and standard, important electron circuit for measurement, instrument of electricity, impedance measurement, power and power amount measurement, frequency and time measurement, waveform measurement, record instrument and direct viewing instrument, super high frequency measurement, digital measurement on analog-digital convert, magnetic measurement on classification by principle of measurement, measurement of electricity application with principle sensors and systematization of measurement.

  4. The Recycler Electron Cooler

    Energy Technology Data Exchange (ETDEWEB)

    Shemyakin, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Prost, L. R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-03-19

    The Recycler Electron cooler was the first (and so far, the only) cooler working at a relativistic energy (γ = 9.5). It was successfully developed in 1995-2004 and was in operation at Fermilab in 2005-2011, providing cooling of antiprotons in the Recycler ring. This paper describes the cooler, difficulties in achieving the required electron beam parameters and the ways to overcome them, cooling measurements, and details of operation.

  5. Weakly oval electron lense

    International Nuclear Information System (INIS)

    Daumenov, T.D.; Alizarovskaya, I.M.; Khizirova, M.A.

    2001-01-01

    The method of the weakly oval electrical field getting generated by the axially-symmetrical field is shown. Such system may be designed with help of the cylindric form coaxial electrodes with the built-in quadrupole duplet. The singularity of the indicated weakly oval lense consists of that it provides the conducting both mechanical and electronic adjustment. Such lense can be useful for elimination of the near-axis astigmatism in the electron-optical system

  6. Mathematics for electronic technology

    CERN Document Server

    Howson, D P

    1975-01-01

    Mathematics for Electronic Technology is a nine-chapter book that begins with the elucidation of the introductory concepts related to use of mathematics in electronic engineering, including differentiation, integration, partial differentiation, infinite series, vectors, vector algebra, and surface, volume and line integrals. Subsequent chapters explore the determinants, differential equations, matrix analysis, complex variable, topography, graph theory, and numerical analysis used in this field. The use of Fourier method for harmonic analysis and the Laplace transform is also described. The ma

  7. Joint Services Electronics Program.

    Science.gov (United States)

    1986-09-30

    electronic multi-dimensional signal processing, (3) electronic time-variant signal processing, and (4) digital time series analysis with applications to...Variant Signal Processing ............... 19 Res. Unit IE85-3 Digital Time Series Analysis with Applications to Nonlinear Wave Phenomena...Boewering, Physics Scott Levinson, ECE T.L. Boyd, Physics Bin-Wah Lin, ECE Robert Brecha , Physics Jorge Castro Luengo, Physics Mike Bruce, Physics * Henry

  8. Electronic states of myricetin

    DEFF Research Database (Denmark)

    Vojta, Danijela; Karlsen, Eva; Spanget-Larsen, Jens

    2017-01-01

    Myricetin (3,3',4',5,5',7'-hexahydroxyflavone) was investigated by linear dichroism spectroscopy on molecular samples partially aligned in stretched poly(vinyl alcohol) (PVA). At least five electronic transitions in the range 40000 – 20000 cm–1 were characterized with respect to their wavenumbers......, relative intensities, and transition moment directions. The observed bands were assigned to electronic transitions predicted with TD-B3LYP/6-31+G(d,p)....

  9. Electronics 3 checkbook

    CERN Document Server

    Knight, S A; May, A J C

    2013-01-01

    Electronics 3 Checkbook provides a concise coverage of the theories and definitions of concepts in electronics. The book provides problems and worked examples to supplement fuller textbooks of the same subject. The coverage of the text includes decibel measurement, operational amplifiers, DA and AD converters, controlled rectifiers, triggering devices, optoelectronic devices, fiber optics, and power amplifiers. The text will be of great use to electrical engineering students who wish to enhance their understanding of the basics of mechanical and electrical science.

  10. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  11. Netiquette in Electronic Communication

    Directory of Open Access Journals (Sweden)

    Tomáš Kozík

    2014-06-01

    Full Text Available Electronic mail and electronic communications systems are considered significant and effective tools of communication. One of the most widespread electronic communication tools is e - mail communication. In order to avoid misinterpretation of the report on the side of the recipient, it is need to pay attention to the writing of e - mail messages as well as to their content. With the continuous expansion of the use of electronic communication there have gradually developed certain rules of etiquette in electronic communications. The existing rules of the propriety ones are expressed in the term " etiqutte " and are not automatically applied in the new communications environment - media. For electronic communication, the new rules of etiquette have been stabilised into a term NETIQUETTE. The word netiquette was created by combining words NET (net and ETIKETA (a set of rules of social behavior and habits. Netiquette constitutes the rules of the behavior of users on a network. Although the netiquette is merely "an unwritten set of rules", their not using can be understood as a type of disrespect. Analysis of knowledge of domestic and foreign sources as well as results of a survey confirmed the justification of paying attention to the education of individuals in NETIQUETTE, irrespective of the degree of education.

  12. Nuclear electronics laboratory manual

    International Nuclear Information System (INIS)

    1984-05-01

    The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

  13. Electron-electron attraction in an engineered electromechanical system

    Science.gov (United States)

    Széchenyi, Gábor; Pályi, András; Droth, Matthias

    2017-12-01

    Two electrons in a quantum dot repel each other: their interaction can be characterized by a positive interaction energy. From the theory of superconductivity, we also know that mechanical vibrations of the crystal lattice can make the electron-electron interaction attractive. Analogously, if a quantum dot interacts with a mechanical degree of freedom, the effective interaction energy can be negative; that is, the electron-electron interaction might be attractive. In this work, we propose and theoretically study an engineered electromechanical system that exhibits electron-electron attraction: a quantum dot suspended on a nonlinear mechanical resonator, tuned by a bottom and a top gate electrode. We focus on the example of a dot embedded in a suspended graphene ribbon, for which we identify conditions for electron-electron attraction. Our results suggest the possibility of electronic transport via tunneling of packets of multiple electrons in such devices, similar to that in superconducting nanostructures, but without the use of any superconducting elements.

  14. Beginning analog electronics through projects

    CERN Document Server

    Singmin, Andrew

    2001-01-01

    Analog electronics is the simplest way to start a fun, informative, learning program. Beginning Analog Electronics Through Projects, Second Edition was written with the needs of beginning hobbyists and students in mind. This revision of Andrew Singmin's popular Beginning Electronics Through Projects provides practical exercises, building techniques, and ideas for useful electronics projects. Additionally, it features new material on analog and digital electronics, and new projects for troubleshooting test equipment.Published in the tradition of Beginning Electronics Through Projects an

  15. Analytics on Transmission Electron Microscopy

    International Nuclear Information System (INIS)

    Keum, Dong Hwa; Kim, Geung Ho; Lee, Hwak Ju and others

    1996-06-01

    This book gives descriptions of transmission electron microscopy, which deals with electron microscopy and materials science, history of electron microscopy, application of analytics on transmission electron microscopy, machine requirement of transmission electron microscopy like electron gun and TEM image and function, crystal diffraction, electron diffraction, Kikuchi's diffraction figure, analysis of diffraction figure, contrast of TEM image like absorption contrast, and phase contrast, Fresnel's diffraction and TEM contrast, thickness fringe, column approximation, analysis of diffraction contrast, image simulation, and electron energy loss spectrometry.

  16. Electronic Submissions of Pesticide Applications

    Science.gov (United States)

    Applications for pesticide registration can be submitted electronically, including forms, studies, and draft product labeling. Applicants need not submit multiple electronic copies of any pieces of their applications.

  17. Electron Accumulative Molecules.

    Science.gov (United States)

    Buades, Ana B; Sanchez Arderiu, Víctor; Olid-Britos, David; Viñas, Clara; Sillanpää, Reijo; Haukka, Matti; Fontrodona, Xavier; Paradinas, Markos; Ocal, Carmen; Teixidor, Francesc

    2018-02-28

    With the goal to produce molecules with high electron accepting capacity and low reorganization energy upon gaining one or more electrons, a synthesis procedure leading to the formation of a B-N(aromatic) bond in a cluster has been developed. The research was focused on the development of a molecular structure able to accept and release a specific number of electrons without decomposing or change in its structural arrangement. The synthetic procedure consists of a parallel decomposition reaction to generate a reactive electrophile and a synthesis reaction to generate the B-N(aromatic) bond. This procedure has paved the way to produce the metallacarboranylviologen [M(C 2 B 9 H 11 )(C 2 B 9 H 10 )-NC 5 H 4 -C 5 H 4 N-M'(C 2 B 9 H 11 )(C 2 B 9 H 10 )] (M = M' = Co, Fe and M = Co and M' = Fe) and semi(metallacarboranyl)viologen [3,3'-M(8-(NC 5 H 4 -C 5 H 4 N-1,2-C 2 B 9 H 10 )(1',2'-C 2 B 9 H 11 )] (M = Co, Fe) electron cumulative molecules. These molecules are able to accept up to five electrons and to donate one in single electron steps at accessible potentials and in a reversible way. By targeted synthesis and corresponding electrochemical tests each electron transfer (ET) step has been assigned to specific fragments of the molecules. The molecules have been carefully characterized, and the electronic communication between both metal centers (when this situation applies) has been definitely observed through the coplanarity of both pyridine fragments. The structural characteristics of these molecules imply a low reorganization energy that is a necessary requirement for low energy ET processes. This makes them electronically comparable to fullerenes, but on their side, they have a wide range of possible solvents. The ET from one molecule to another has been clearly demonstrated as well as their self-organizing capacity. We consider that these molecules, thanks to their easy synthesis, ET, self-organizing capacity, wide range of solubility, and easy processability, can

  18. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  19. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  20. Electron Interactions in Graphene

    Science.gov (United States)

    Kim, Philip

    2011-03-01

    Electrons confined in two dimensions (2D) can exhibit strongly correlated states. Recent experimental discovery of integer and fractional quantum Hall effect in graphene amplified interest in correlated 2D electronic systems, owning to presence of the unusual topological phase associated with zero effective mass of charge carriers. In this talk, we will discuss the role of the many-body effects due to the electron-electron interaction in graphene manifested in electron transport phenomena. In particular, we will discuss the nature unusual spontaneous symmetry breaking Landau levels graphene under the extreme quantum condition, the appearance of unique low density insulating states and fractional quantum Hall states. Employing extremely high quality samples obtained by suspending graphene and graphene on atomically flat defect free insulating substrate such as hexa-bron nitride, we now investigate various broken symmetry states under high magnetic field. The nature of these broken symmetry state can be explained generally considering underlying SU(4) symmetry in the single particle level of the Landau levels.

  1. Politics Under Electronic Simultaneity

    Directory of Open Access Journals (Sweden)

    Valery P. Terin

    2014-01-01

    Full Text Available In contradistinction to the book and the other typographic products, the electronic media operates on a 24-hour-a-day basis evoking simultaneity as the guiding mode of perception and thinking for all those under its influence. The discovery of this fact manifested itself in the formation and development of the managerial technologies operating by means of the electronic information environment and following the principle of simultaneity in the first place. Thus, at the end of the 1960s already the election campaigns in the U.S.A. began to operate on the basis of the final cause as the guiding principle of the country's mass consciousness motivating to carry out each particular event as if already rejoicing at the victory. With this in mind, there emerged a problem of applying this approach with its enormous managerial potential elsewhere. To add, simultaneity as a norm of perception and thinking turned out to be increasingly important with the advent of the electrical telegraph and the press relying on its short disconnected messages instantaneously arriving from all parts of the world. All the other media, which emerged in the wake of this development, has served to fortify this mode of thought as governing in the electronic information environment. The potential of the electronically operating global managerial technologies is quickly growing. The article also deals with the information overload and pattern recognition problem understood in managerial terms as well as mythologization and demythologization processes as they are necessitated by the electronic media coverage worldwide.

  2. Microfluidic stretchable RF electronics.

    Science.gov (United States)

    Cheng, Shi; Wu, Zhigang

    2010-12-07

    Stretchable electronics is a revolutionary technology that will potentially create a world of radically different electronic devices and systems that open up an entirely new spectrum of possibilities. This article proposes a microfluidic based solution for stretchable radio frequency (RF) electronics, using hybrid integration of active circuits assembled on flex foils and liquid alloy passive structures embedded in elastic substrates, e.g. polydimethylsiloxane (PDMS). This concept was employed to implement a 900 MHz stretchable RF radiation sensor, consisting of a large area elastic antenna and a cluster of conventional rigid components for RF power detection. The integrated radiation sensor except the power supply was fully embedded in a thin elastomeric substrate. Good electrical performance of the standalone stretchable antenna as well as the RF power detection sub-module was verified by experiments. The sensor successfully detected the RF radiation over 5 m distance in the system demonstration. Experiments on two-dimensional (2D) stretching up to 15%, folding and twisting of the demonstrated sensor were also carried out. Despite the integrated device was severely deformed, no failure in RF radiation sensing was observed in the tests. This technique illuminates a promising route of realizing stretchable and foldable large area integrated RF electronics that are of great interest to a variety of applications like wearable computing, health monitoring, medical diagnostics, and curvilinear electronics.

  3. Electron microscope phase enhancement

    Science.gov (United States)

    Jin, Jian; Glaeser, Robert M.

    2010-06-15

    A microfabricated electron phase shift element is used for modifying the phase characteristics of an electron beam passing though its center aperture, while not affecting the more divergent portion of an incident beam to selectively provide a ninety-degree phase shift to the unscattered beam in the back focal plan of the objective lens, in order to realize Zernike-type, in-focus phase contrast in an electron microscope. One application of the element is to increase the contrast of an electron microscope for viewing weakly scattering samples while in focus. Typical weakly scattering samples include biological samples such as macromolecules, or perhaps cells. Preliminary experimental images demonstrate that these devices do apply a ninety degree phase shift as expected. Electrostatic calculations have been used to determine that fringing fields in the region of the scattered electron beams will cause a negligible phase shift as long as the ratio of electrode length to the transverse feature-size aperture is about 5:1. Calculations are underway to determine the feasibility of aspect smaller aspect ratios of about 3:1 and about 2:1.

  4. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-05-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent. While maintaining large-scale production and prototyping rapidity, this flexible and translucent scheme demonstrates the potential to transform conventionally stiff electronic devices into thin and foldable ones without compromising long-term performance and reliability. In this work, we report on the fabrication and characterization of reversibly bistable flexible electronic switches that utilize flexible n-channel metal-oxide-semiconductor field-effect transistors. The transistors are fabricated initially on rigid (100) silicon substrates before they are peeled off. They can be used to control flexible batches of light-emitting diodes, demonstrating both the relative ease of scaling at minimum cost and maximum reliability and the feasibility of integration. The peeled-off silicon fabric is about 25 µm thick. The fabricated devices are transferred to a reversibly bistable flexible platform through which, for example, a flexible smartphone can be wrapped around a user’s wrist and can also be set back to its original mechanical position. Buckling and cyclic bending of such host platforms brings a completely new dimension to the development of flexible electronics, especially rollable displays.

  5. Wireless Biological Electronic Sensors.

    Science.gov (United States)

    Cui, Yue

    2017-10-09

    The development of wireless biological electronic sensors could open up significant advances for both fundamental studies and practical applications in a variety of areas, including medical diagnosis, environmental monitoring, and defense applications. One of the major challenges in the development of wireless bioelectronic sensors is the successful integration of biosensing units and wireless signal transducers. In recent years, there are a few types of wireless communication systems that have been integrated with biosensing systems to construct wireless bioelectronic sensors. To successfully construct wireless biological electronic sensors, there are several interesting questions: What types of biosensing transducers can be used in wireless bioelectronic sensors? What types of wireless systems can be integrated with biosensing transducers to construct wireless bioelectronic sensors? How are the electrical sensing signals generated and transmitted? This review will highlight the early attempts to address these questions in the development of wireless biological electronic sensors.

  6. Phasor power electronics

    CERN Document Server

    Rim, Chun T

    2016-01-01

    This book presents a comprehensive introduction to the principles of power electronics, focusing on the switched transformer concept and phasor transformation techniques as employed in the analysis and design of power electronic circuits. Phasor transformations, as introduced in this book, make the time-varying nature of a switching converter simple and easy to handle, transforming it into an equivalent time-invariant circuit. The book starts with an introduction to the philosophy and fundamental principles of power electronics. The switched transformer concept, which is applicable to any switching converter, is introduced, and it is shown how DC-DC converters analyses are then so straightforward that very little equational manipulation is needed. Then the phasor transformation techniques are comprehensively explained over three parts. Single phase and multi-phase AC systems are dealt with through the single phase phasor transformation and circuit DQ transformation, respectively. A general unified phasor tran...

  7. Foil Electron Multiplier

    Science.gov (United States)

    Funsten, Herbert O.; Baldonado, Juan R.; Dors, Eric E.; Harper, Ronnie W.; Skoug, Ruth M.

    2006-03-28

    An apparatus for electron multiplication by transmission that is designed with at least one foil having a front side for receiving incident particles and a back side for transmitting secondary electrons that are produced from the incident particles transiting through the foil. The foil thickness enables the incident particles to travel through the foil and continue on to an anode or to a next foil in series with the first foil. The foil, or foils, and anode are contained within a supporting structure that is attached within an evacuated enclosure. An electrical power supply is connected to the foil, or foils, and the anode to provide an electrical field gradient effective to accelerate negatively charged incident particles and the generated secondary electrons through the foil, or foils, to the anode for collection.

  8. ELECTRON EMISSION REGULATING MEANS

    Science.gov (United States)

    Brenholdt, I.R.

    1957-11-19

    >An electronic regulating system is described for controlling the electron emission of a cathode, for example, the cathode in a mass spectrometer. The system incorporates a transformer having a first secondary winding for the above-mentioned cathode and a second secondary winding for the above-mentioned cathode and a second secondary winding load by grid controlled vacuum tubes. A portion of the electron current emitted by the cathode is passed through a network which develops a feedback signal. The system arrangement is completed by using the feedback signal to control the vacuum tubes in the second secondary winding through a regulator tube. When a change in cathode emission occurs, the feedback signal acts to correct this change by adjusting the load on the transformer.

  9. Electronics a systems approach

    CERN Document Server

    Storey, Neil

    2017-01-01

    Electronics plays a central role in our everyday lives. It is at the heart of almost all of today's essential technology, from mobile phones to computers and from cars to power stations. As such, all engineers, scientists and technologists need to have a fundamental understanding of this exciting subject, and for many this will just be the beginning. Now in its sixth edition, Electronics: A Systems Approach provides an outstanding introduction to this fast-moving and important field. Comprehensively revised and updated to cover the latest developments in the world of electronics, the text continues to use Neil Storey's established and well-respected systems approach. It introduces the basic concepts first before progressing to a more advanced analysis, enabling you to contextualise what a system is designed to achieve before tackling the intricacies of designing or analysing its various components with confidence. This book is accompanied by a website which contains over 100 video tutorials to help explain ke...

  10. Modern electronic maintenance principles

    CERN Document Server

    Garland, DJ

    2013-01-01

    Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai

  11. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    1988-01-01

    Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

  12. Electronics for technicians

    CERN Document Server

    Crane, P W

    2013-01-01

    Electronics for Technicians covers the basic fundamentals of electronics, including the operation of devices and circuits. The book is meant to help the technician to obtain numerical answers to actual circuit problems. This volume consists of seven chapters, the first of which introduces the reader to the basic rules for circuits containing resistive and reactive elements. Charge and discharge of a capacitor through a resistor is discussed, along with charge and discharge of an inductance through a resistance, application of sinusoidal voltages to simple networks, and series and parallel LCR

  13. VLSI electronics microstructure science

    CERN Document Server

    1981-01-01

    VLSI Electronics: Microstructure Science, Volume 3 evaluates trends for the future of very large scale integration (VLSI) electronics and the scientific base that supports its development.This book discusses the impact of VLSI on computer architectures; VLSI design and design aid requirements; and design, fabrication, and performance of CCD imagers. The approaches, potential, and progress of ultra-high-speed GaAs VLSI; computer modeling of MOSFETs; and numerical physics of micron-length and submicron-length semiconductor devices are also elaborated. This text likewise covers the optical linewi

  14. Advances in electronic materials

    CERN Document Server

    Kasper, Erich; Grimmeiss, Hermann G

    2008-01-01

    This special-topic volume, Advances in Electronic Materials, covers various fields of materials research such as silicon, silicon-germanium hetero-structures, high-k materials, III-V semiconductor alloys and organic materials, as well as nano-structures for spintronics and photovoltaics. It begins with a brief summary of the formative years of microelectronics; now the keystone of information technology. The latter remains one of the most important global technologies, and is an extremely complex subject-area. Although electronic materials are primarily associated with computers, the internet

  15. Auroral electron acceleration

    International Nuclear Information System (INIS)

    Bryant, D.A.

    1989-10-01

    Two theories of auroral electron acceleration are discussed. Part 1 examines the currently widely held view that the acceleration is an ordered process in a quasi-static electric field. It is suggested that, although there are many factors seeming to support this theory, the major qualifications and uncertainties that have been identified combine to cast serious doubt over its validity. Part 2 is devoted to a relatively new interpretation in terms of stochastic acceleration in turbulent electric fields. This second theory, which appears to account readily for most known features of the electron distribution function, is considered to provide a more promising approach to this central question in magnetospheric plasma physics. (author)

  16. Electronic logic circuits

    CERN Document Server

    Gibson, J

    2013-01-01

    Most branches of organizing utilize digital electronic systems. This book introduces the design of such systems using basic logic elements as the components. The material is presented in a straightforward manner suitable for students of electronic engineering and computer science. The book is also of use to engineers in related disciplines who require a clear introduction to logic circuits. This third edition has been revised to encompass the most recent advances in technology as well as the latest trends in components and notation. It includes a wide coverage of application specific integrate

  17. Electronics 2 checkbook

    CERN Document Server

    Knight, S A

    2013-01-01

    Electronics 2 Checkbook is an 11-chapter text that presents problems and worked examples to establish and exemplify the theory contained in technical syllabuses, with a particular emphasis on electronics.The introductory chapters review the elementary theory of semiconductors and the p-n junction diode. The subsequent chapters deal with the applications of diode, the characteristics of bipolar transistors, and the mode of operation of small signal amplifiers. These topics are followed by discussions of the function of the field-effect transistor and power supplies. The concluding chapters expl

  18. Electronic health record

    DEFF Research Database (Denmark)

    Kierkegaard, Patrick

    2011-01-01

    that a centralised European health record system will become a reality even before 2020. However, the concept of a centralised supranational central server raises concern about storing electronic medical records in a central location. The privacy threat posed by a supranational network is a key concern. Cross border...... and Interoperable electronic health record systems make confidential data more easily and rapidly accessible to a wider audience and increases the risk that personal data concerning health could be accidentally exposed or easily distributed to unauthorised parties by enabling greater access to a compilation...

  19. Electronic health records

    DEFF Research Database (Denmark)

    Kierkegaard, Patrick

    2011-01-01

    that a centralised European health record system will become a reality even before 2020. However, the concept of a centralised supranational central server raises concern about storing electronic medical records in a central location. The privacy threat posed by a supranational network is a key concern. Cross......-border and Interoperable electronic health record systems make confidential data more easily and rapidly accessible to a wider audience and increase the risk that personal data concerning health could be accidentally exposed or easily distributed to unauthorised parties by enabling greater access to a compilation...

  20. Innovations in electronic services

    Directory of Open Access Journals (Sweden)

    Dagmara Wach

    2011-12-01

    Full Text Available Summarry Existence in electronic business has become increasingly difficult. High competition and considerable financial resources needed to enter electronic market are the problems of most micro and small sized enterprises, starting or developing their business. Nevertheless, there is a market niche for them, which can ensure success and grant partial financing of the business. This niche are small web projects, providing the customer with personalized service, hitting his tastes and meeting immediate needs. A projects that large websites are unable to perform. Financial sourcing of those projects comes from EU subsidies, in the framework of the Działanie 8.1. PO IG, 2007-2013.

  1. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1972-01-01

    Electronic Devices and Circuits, Volume 3 provides a comprehensive account on electronic devices and circuits and includes introductory network theory and physics. The physics of semiconductor devices is described, along with field effect transistors, small-signal equivalent circuits of bipolar transistors, and integrated circuits. Linear and non-linear circuits as well as logic circuits are also considered. This volume is comprised of 12 chapters and begins with an analysis of the use of Laplace transforms for analysis of filter networks, followed by a discussion on the physical properties of

  2. Precision electron polarimetry

    International Nuclear Information System (INIS)

    Chudakov, E.

    2013-01-01

    A new generation of precise Parity-Violating experiments will require a sub-percent accuracy of electron beam polarimetry. Compton polarimetry can provide such accuracy at high energies, but at a few hundred MeV the small analyzing power limits the sensitivity. Mo/ller polarimetry provides a high analyzing power independent on the beam energy, but is limited by the properties of the polarized targets commonly used. Options for precision polarimetry at 300 MeV will be discussed, in particular a proposal to use ultra-cold atomic hydrogen traps to provide a 100%-polarized electron target for Mo/ller polarimetry

  3. Corrosion in Electronics

    DEFF Research Database (Denmark)

    Ambat, Rajan; Gudla, Helene Virginie Conseil; Verdingovas, Vadimas

    2017-01-01

    and high density packing combined with the use of several materials, which can undergo electrochemical corrosion in the presence of water film formed due to humidity exposure and bias conditions on the PCBA surface. This article provides a short review of the corrosion reliability issues of electronics due...... to the use of electronics under varying humidity conditions. Important PCBA aspects, which are fundamental to the corrosion cell formation under humid conditions, are discussed. Effect of hygroscopic residues from the process and service and their role in assisting water film build up and corrosion...... is presented. Various failure modes resulting from the corrosion and influence factors are discussed including humid and gaseous conditions....

  4. Precision electron polarimetry

    Energy Technology Data Exchange (ETDEWEB)

    Chudakov, Eugene A. [JLAB

    2013-11-01

    A new generation of precise Parity-Violating experiments will require a sub-percent accuracy of electron beam polarimetry. Compton polarimetry can provide such accuracy at high energies, but at a few hundred MeV the small analyzing power limits the sensitivity. M{\\o}ller polarimetry provides a high analyzing power independent on the beam energy, but is limited by the properties of the polarized targets commonly used. Options for precision polarimetry at ~300 MeV will be discussed, in particular a proposal to use ultra-cold atomic hydrogen traps to provide a 100\\%-polarized electron target for M{\\o}ller polarimetry.

  5. The ATLAS TRT electronics

    Science.gov (United States)

    ATLAS TRT Collaboration; Abat, E.; Addy, T. N.; Åkesson, T. P. A.; Alison, J.; Anghinolfi, F.; Arik, E.; Arik, M.; Atoian, G.; Auerbach, B.; Baker, O. K.; Banas, E.; Baron, S.; Bault, C.; Becerici, N.; Beddall, A.; Beddall, A. J.; Bendotti, J.; Benjamin, D. P.; Bertelsen, H.; Bingul, A.; Blampey, H.; Bocci, A.; Bochenek, M.; Bondarenko, V. G.; Bychkov, V.; Callahan, J.; Capeáns Garrido, M.; Cardiel Sas, L.; Catinaccio, A.; Cetin, S. A.; Chandler, T.; Chritin, R.; Cwetanski, P.; Dam, M.; Danielsson, H.; Danilevich, E.; David, E.; Degenhardt, J.; Di Girolamo, B.; Dittus, F.; Dixon, N.; Dogan, O. B.; Dolgoshein, B. A.; Dressnandt, N.; Driouchi, C.; Ebenstein, W. L.; Eerola, P.; Egede, U.; Egorov, K.; Evans, H.; Farthouat, P.; Fedin, O. L.; Fowler, A. J.; Fratina, S.; Froidevaux, D.; Fry, A.; Gagnon, P.; Gavrilenko, I. L.; Gay, C.; Ghodbane, N.; Godlewski, J.; Goulette, M.; Gousakov, I.; Grigalashvili, N.; Grishkevich, Y.; Grognuz, J.; Hajduk, Z.; Hance, M.; Hansen, F.; Hansen, J. B.; Hansen, P. H.; Hare, G. A.; Harvey, A., Jr.; Hauviller, C.; High, A.; Hulsbergen, W.; Huta, W.; Issakov, V.; Istin, S.; Jain, V.; Jarlskog, G.; Jeanty, L.; Kantserov, V. A.; Kaplan, B.; Kapliy, A. S.; Katounin, S.; Kayumov, F.; Keener, P. T.; Kekelidze, G. D.; Khabarova, E.; Khristachev, A.; Kisielewski, B.; Kittelmann, T. H.; Kline, C.; Klinkby, E. B.; Klopov, N. V.; Ko, B. R.; Koffas, T.; Kondratieva, N. V.; Konovalov, S. P.; Koperny, S.; Korsmo, H.; Kovalenko, S.; Kowalski, T. Z.; Krüger, K.; Kramarenko, V.; Kudin, L. G.; LeBihan, A.-C.; LeGeyt, B. C.; Levterov, K.; Lichard, P.; Lindahl, A.; Lisan, V.; Lobastov, S.; Loginov, A.; Loh, C. W.; Lokwitz, S.; Long, M. C.; Lucas, S.; Lucotte, A.; Luehring, F.; Lundberg, B.; Mackeprang, R.; Maleev, V. P.; Manara, A.; Mandl, M.; Martin, A. J.; Martin, F. F.; Mashinistov, R.; Mayers, G. M.; McFarlane, K. W.; Mialkovski, V.; Mills, B. M.; Mindur, B.; Mitsou, V. A.; Mjörnmark, J. U.; Morozov, S. V.; Morris, E.; Mouraviev, S. V.; Muir, A. M.; Munar, A.; Nadtochi, A. V.; Nesterov, S. Y.; Newcomer, F. M.; Nikitin, N.; Novgorodova, O.; Novodvorski, E. G.; Ogren, H.; Oh, S. H.; Oleshko, S. B.; Olivito, D.; Olszowska, J.; Ostrowicz, W.; Passmore, M. S.; Patrichev, S.; Penwell, J.; Perez-Gomez, F.; Peshekhonov, V. D.; Petersen, T. C.; Petti, R.; Placci, A.; Poblaguev, A.; Pons, X.; Price, M. J.; Røhne, O.; Reece, R. D.; Reilly, M. B.; Rembser, C.; Romaniouk, A.; Rousseau, D.; Rust, D.; Ryabov, Y. F.; Ryjov, V.; Söderberg, M.; Savenkov, A.; Saxon, J.; Scandurra, M.; Schegelsky, V. A.; Scherzer, M. I.; Schmidt, M. P.; Schmitt, C.; Sedykh, E.; Seliverstov, D. M.; Shin, T.; Shmeleva, A.; Sivoklokov, S.; Smirnov, S. Yu; Smirnova, L.; Smirnova, O.; Smith, P.; Sosnovtsev, V. V.; Sprachmann, G.; Subramania, S.; Suchkov, S. I.; Sulin, V. V.; Szczygiel, R. R.; Tartarelli, G.; Thomson, E.; Tikhomirov, V. O.; Tipton, P.; Valls Ferrer, J. A.; Van Berg, R.; Vassilakopoulos, V. I.; Vassilieva, L.; Wagner, P.; Wall, R.; Wang, C.; Whittington, D.; Williams, H. H.; Zhelezko, A.; Zhukov, K.

    2008-06-01

    The ATLAS inner detector consists of three sub-systems: the pixel detector spanning the radius range 4cm-20cm, the semiconductor tracker at radii from 30 to 52 cm, and the transition radiation tracker (TRT), tracking from 56 to 107 cm. The TRT provides a combination of continuous tracking with many projective measurements based on individual drift tubes (or straws) and of electron identification based on transition radiation from fibres or foils interleaved between the straws themselves. This paper describes the on and off detector electronics for the TRT as well as the TRT portion of the data acquisition (DAQ) system.

  6. Newnes electronics assembly pocket book

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Produced in association with the Engineering Training Authority with contributions from dozens of people in the electronics industry. The material covers common skills in electrical and electronic engineering and concentrates mainly on wiring and assembly. 'Newnes Electronics Assembly Pocket Book' is for electronics technicians, students and apprentices.

  7. Electron localization in water clusters

    International Nuclear Information System (INIS)

    Landman, U.; Barnett, R.N.; Cleveland, C.L.; Jortner, J.

    1987-01-01

    Electron attachment to water clusters was explored by the quantum path integral molecular dynamics method, demonstrating that the energetically favored localization mode involves a surface state of the excess electron, rather than the precursor of the hydrated electron. The cluster size dependence, the energetics and the charge distribution of these novel electron-cluster surface states are explored. 20 refs., 2 figs., 1 tab

  8. TRANSIENT ELECTRONICS CATEGORIZATION

    Science.gov (United States)

    2017-08-24

    building transience into critical electronic systems is not new. Anyone who watched the 1970’s television series Mission Impossible is familiar with the...Madou, “MEMS fabrication”, in The MEMS Handbook , CRC Press, New York, NY, Ch. 16, pp1-183, (2002). 20 K. R. Williams, K. Gupta, and M. Wasilik

  9. Electron-Cyclotron Waves

    NARCIS (Netherlands)

    Westerhof, E.

    1994-01-01

    The essential elements of the theory of electron cyclotron waves are reviewed, The two main electro-magnetic modes of propagation are identified and their dispersion and absorption properties are discussed. The importance of the use of the relativistic resonance condition is stressed.

  10. Electronics Book II.

    Science.gov (United States)

    Johnson, Dennis; And Others

    This manual, the second of three curriculum guides for an electronics course, is intended for use in a program combining vocational English as a second language (VESL) with bilingual vocational education. Ten units cover the electrical team, Ohm's law, Watt's law, series resistive circuits, parallel resistive circuits, series parallel circuits,…

  11. Joint Services Electronics Program.

    Science.gov (United States)

    1987-12-31

    Graduate Students: R. J. Brecha, M. G. Raizen, Min Xiao, L. A. Orozco, L. A. Wu, W. David Lee, Heung Choo , Silvania Pereira A. RESEARCH OBJECTIVES: The...P.O. Box 12211 Dr. Donn V. Campbell % Research Triangle Park, NC 27709-2211 U.S. Army Communications-Electronics Command Dr. Jimmie R. Suttle ATTN

  12. electronic and structural investigations

    Indian Academy of Sciences (India)

    2018-03-30

    Mar 30, 2018 ... Indian Academy of Sciences https://doi.org/10.1007/s12034-018-1572-8. Milling effect on the photo-activated properties of TiO2 nanoparticles: electronic and structural investigations. YOUCEF MESSAI1,2, BERTRAND VILENO2,4, DAVID MARTEL3, PHILIPPE TUREK2,4 and. DJAMEL EDDINE MEKKI1,∗.

  13. Electrons in Condensed Matter

    Indian Academy of Sciences (India)

    help conduct electrical current, as described below, and the high electrical conductivity of metals such as aluminium is ascribed to their having a high density of ..... electron interactions and some disorder are essential to the observation of these unique quantum phenomena. Laughlin predicted that the lowest stable excited ...

  14. Japan's electronic packaging technologies

    Science.gov (United States)

    Tummala, Rao R.; Pecht, Michael

    1995-01-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  15. Electron Paramagnetic Resonance Imaging

    Indian Academy of Sciences (India)

    Twentieth century bore witness to remarkable scientists whohave advanced our understanding of the brain. Among them,EPR (Electron Paramagnetic Resonance) imaging is particularlyuseful in monitoring hypoxic zones in tumors which arehighly resistant to radiation and chemotherapeutic treatment.This first part of the ...

  16. Electronic Load Bank

    Science.gov (United States)

    Huston, Steven W.

    1992-01-01

    Electronic load-bank circuit provides pulsed or continuous low-resistance load to imitate effect of short circuit on Ni/H2 or other electrochemical power cells. Includes safety/warning feature and taps for measurement of cell-output voltage and current.

  17. Electron injection in microtron

    International Nuclear Information System (INIS)

    Axinescu, S.

    1977-01-01

    A review of the methods of injecting electrons in the microtron is presented. A special attention is paid to efficient injection systems developed by Wernholm and Kapitza. A comparison of advantages and disadvantages of both systems is made in relation to the purpose of the microtron. (author)

  18. Electronic waste recycling techniques

    CERN Document Server

    Bernardes, Andréa

    2015-01-01

    This book presents an overview of the characterization of electronic waste. In addition, processing techniques for the recovery of metals, polymers and ceramics are described. This book serves as a source of information and as an educational technical reference for practicing scientists and engineers, as well as for students.

  19. Electron Device Contact Studies.

    Science.gov (United States)

    1980-08-01

    including foreign nations. This technical report has been reviewed and is approved for publication. MILLARD C. # IyR , PrFoject Engineer Electronic...potential ED - Ec = TD = donor potential (for Sn in GaAs nD = 5.82 meV [351 Given values for Cs and T, the computer programs find the simultaneous

  20. Electronic document interchange

    Science.gov (United States)

    Erwin, Jim

    1993-01-01

    The operational impact of various storage formats related to electronic publishing of documents in the NASA Scientific and Technical Information (STI) Program is discussed. Questions are raised about the development of full text, surrogate, and hybrid storage formats. It appears that the eventual configuration will contain a mix of storage formats based on user demand.

  1. Electron beam processing system

    International Nuclear Information System (INIS)

    Kashiwagi, Masayuki

    2004-01-01

    Electron beam Processing Systems (EPS) are used as useful and powerful tools in many industrial application fields such as the production of cross-linked wire, rubber tire, heat shrinkable film and tubing, curing, degradation of polymers, sterilization and environmental application. In this paper, the feature and application fields, the selection of machine ratings and safety measures of EPS will be described. (author)

  2. Electron hopping through proteins

    Czech Academy of Sciences Publication Activity Database

    Warren, J. J.; Ener, M. E.; Vlček, Antonín; Winkler, J. R.; Gray, H. B.

    2012-01-01

    Roč. 256, 21-22 (2012), s. 2478-2487 ISSN 0010-8545 R&D Projects: GA MŠk(CZ) ME10124 Institutional support: RVO:61388955 Keywords : electron transfer * multistep tunneling * hopping maps Subject RIV: CG - Electrochemistry Impact factor: 11.016, year: 2012

  3. Basic Electronics II.

    Science.gov (United States)

    Willison, Neal A.; Shelton, James K.

    Designed for use in basic electronics programs, this curriculum guide is comprised of 15 units of instruction. Unit titles are Review of the Nature of Matter and the P-N Junction, Rectifiers, Filters, Special Semiconductor Diodes, Bipolar-Junction Diodes, Bipolar Transistor Circuits, Transistor Amplifiers, Operational Amplifiers, Logic Devices,…

  4. The electronic neighbourhood

    DEFF Research Database (Denmark)

    Rüdiger, Bjarne; Tournay, Bruno

    2004-01-01

    This paper presents the results of a 3-year research project. The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban...

  5. Electron Paramagnetic Resonance Spectroscopy

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 11. Electron Paramagnetic Resonance Spectroscopy: Biological Applications. B G Hegde. General Article Volume 20 Issue 11 November 2015 pp 1017-1032. Fulltext. Click here to view fulltext PDF. Permanent link:

  6. The electronic stethoscope.

    Science.gov (United States)

    Leng, Shuang; Tan, Ru San; Chai, Kevin Tshun Chuan; Wang, Chao; Ghista, Dhanjoo; Zhong, Liang

    2015-07-10

    Most heart diseases are associated with and reflected by the sounds that the heart produces. Heart auscultation, defined as listening to the heart sound, has been a very important method for the early diagnosis of cardiac dysfunction. Traditional auscultation requires substantial clinical experience and good listening skills. The emergence of the electronic stethoscope has paved the way for a new field of computer-aided auscultation. This article provides an in-depth study of (1) the electronic stethoscope technology, and (2) the methodology for diagnosis of cardiac disorders based on computer-aided auscultation. The paper is based on a comprehensive review of (1) literature articles, (2) market (state-of-the-art) products, and (3) smartphone stethoscope apps. It covers in depth every key component of the computer-aided system with electronic stethoscope, from sensor design, front-end circuitry, denoising algorithm, heart sound segmentation, to the final machine learning techniques. Our intent is to provide an informative and illustrative presentation of the electronic stethoscope, which is valuable and beneficial to academics, researchers and engineers in the technical field, as well as to medical professionals to facilitate its use clinically. The paper provides the technological and medical basis for the development and commercialization of a real-time integrated heart sound detection, acquisition and quantification system.

  7. Electron Cyclotron Waves

    International Nuclear Information System (INIS)

    Hoekzema, J.A.

    2004-01-01

    An introduction is given to plasma heating and current drive with electromagnetic waves in the electron cyclotron range of frequencies, with emphasis on application in tokamak plasmas. Propagation and absorption of these waves is generally well described by linear theory, a short overview of which is given. Electron cyclotron absorption is limited to regions of the plasma where the gyromotion of electrons is in resonance with the wave frequency and can be well localised, even in smaller experiments. Apart from being able to provide global heating and non-inductive current drive, ECRH and ECCD are therefore important tools to study and manipulate locally instabilities in the plasma which are electron temperature gradient or current driven. Important potential control applications in a reactor grade plasma include mode stabilisation to prevent disruptions, transport manipulation (e.g. to maintain burn) and correction of the bootstrap current profile. The use of EC waves in major tokamak experiments has in the past been restricted due to the lack of suitable sources. These sources are, however, now rapidly becoming available

  8. Power Electronics Thermal Management

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Gilberto [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-07

    Thermal modeling was conducted to evaluate and develop thermal management strategies for high-temperature wide-bandgap (WBG)-based power electronics systems. WBG device temperatures of 175 degrees C to 250 degrees C were modeled under various under-hood temperature environments. Modeling result were used to identify the most effective capacitor cooling strategies under high device temperature conditions.

  9. International Competitiveness in Electronics.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Office of Technology Assessment.

    This assessment continues the Office of Technology Assessment's (OTA) exploration of the meaning of industrial policy in the United States context, while also examining the industrial policies of several U.S. economic rivals. The major focus is on electronics, an area which virtually defines "high technology" of the 1980's. The…

  10. Quantitative Electron Nanodiffraction.

    Energy Technology Data Exchange (ETDEWEB)

    Spence, John [Arizona State Univ., Mesa, AZ (United States)

    2015-01-30

    This Final report summarizes progress under this award for the final reporting period 2002 - 2013 in our development of quantitive electron nanodiffraction to materials problems, especially devoted to atomistic processes in semiconductors and electronic oxides such as the new artificial oxide multilayers, where our microdiffraction is complemented with energy-loss spectroscopy (ELNES) and aberration-corrected STEM imaging (9). The method has also been used to map out the chemical bonds in the important GaN semiconductor (1) used for solid state lighting, and to understand the effects of stacking sequence variations and interfaces in digital oxide superlattices (8). Other projects include the development of a laser-beam Zernike phase plate for cryo-electron microscopy (5) (based on the Kapitza-Dirac effect), work on reconstruction of molecular images using the scattering from many identical molecules lying in random orientations (4), a review article on space-group determination for the International Tables on Crystallography (10), the observation of energy-loss spectra with millivolt energy resolution and sub-nanometer spatial resolution from individual point defects in an alkali halide, a review article for the Centenary of X-ray Diffration (17) and the development of a new method of electron-beam lithography (12). We briefly summarize here the work on GaN, on oxide superlattice ELNES, and on lithography by STEM.

  11. Chemistry of fast electrons.

    Science.gov (United States)

    Maximoff, Sergey N; Head-Gordon, Martin P

    2009-07-14

    A chemicurrent is a flux of fast (kinetic energy approximately > 0.5-1.3 eV) metal electrons caused by moderately exothermic (1-3 eV) chemical reactions over high work function (4-6 eV) metal surfaces. In this report, the relation between chemicurrent and surface chemistry is elucidated with a combination of top-down phenomenology and bottom-up atomic-scale modeling. Examination of catalytic CO oxidation, an example which exhibits a chemicurrent, reveals 3 constituents of this relation: The localization of some conduction electrons to the surface via a reduction reaction, 0.5 O(2) + deltae(-) --> O(delta(-)) (Red); the delocalization of some surface electrons into a conduction band in an oxidation reaction, O(delta(-)) + CO --> CO(2)(delta-) --> CO(2) + deltae(-) (Ox); and relaxation without charge transfer (Rel). Juxtaposition of Red, Ox, and Rel produces a daunting variety of metal electronic excitations, but only those that originate from CO(2) reactive desorption are long-range and fast enough to dominate the chemicurrent. The chemicurrent yield depends on the universality class of the desorption process and the distribution of the desorption thresholds. This analysis implies a power-law relation with exponent 2.66 between the chemicurrent and the heat of adsorption, which is consistent with experimental findings for a range of systems. This picture also applies to other oxidation-reduction reactions over high work function metal surfaces.

  12. Electronic Battlefield Facility

    NARCIS (Netherlands)

    Kuijpers, N.H.L.; Elias, R.J.D.; Gouweleeuw, R.G.W.

    1996-01-01

    The changing role and organisation of the armed forces requires new methods for development, evaluation and operation of military equipment, and for the training of personnel. Simulation is an acceptable solution to reduce costs and protect the environment. TNO Physics and Electronics Laboratory

  13. Japan's electronic packaging technologies

    Science.gov (United States)

    Tummala, Rao R.; Pecht, Michael

    1995-02-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  14. Electrons in Condensed Matter

    Indian Academy of Sciences (India)

    Electrons in Condensed Matter. T V Ramakrishnan. Introduction. A hundred years ago, J J Thomson tore light negatively charged particles out of many different kinds of atoms by subjecting them to strong electric fields in discharge tubes. He showed that the same particle (with identical charge e and charge to mass ratio ...

  15. Forensic Scanning Electron Microscope

    Science.gov (United States)

    Keeley, R. H.

    1983-03-01

    The scanning electron microscope equipped with an x-ray spectrometer is a versatile instrument which has many uses in the investigation of crime and preparation of scientific evidence for the courts. Major applications include microscopy and analysis of very small fragments of paint, glass and other materials which may link an individual with a scene of crime, identification of firearms residues and examination of questioned documents. Although simultaneous observation and chemical analysis of the sample is the most important feature of the instrument, other modes of operation such as cathodoluminescence spectrometry, backscattered electron imaging and direct x-ray excitation are also exploited. Marks on two bullets or cartridge cases can be compared directly by sequential scanning with a single beam or electronic linkage of two instruments. Particles of primer residue deposited on the skin and clothing when a gun is fired can be collected on adhesive tape and identified by their morphology and elemental composition. It is also possible to differentiate between the primer residues of different types of ammunition. Bullets may be identified from the small fragments left behind as they pass through the body tissues. In the examination of questioned documents the scanning electron microscope is used to establish the order in which two intersecting ink lines were written and to detect traces of chemical markers added to the security inks on official documents.

  16. Electronic transport properties

    International Nuclear Information System (INIS)

    Young, W.H.

    1985-01-01

    The theory of the electron transport properties of liquid alkali metals is described. Conductivity coefficients, Boltzmann theory, Ziman theory, alkali form factors, Ziman theory and alkalis, Faber-Ziman alloy theory, Faber-Ziman theory and alkali-alkali methods, status of Ziman theory, and other transport properties, are all discussed. (UK)

  17. Electron energies in metals

    Energy Technology Data Exchange (ETDEWEB)

    Mahan, G.D. (Oak Ridge National Lab., TN (United States) Tennessee Univ., Knoxville, TN (United States). Dept. of Physics and Astronomy)

    1991-07-10

    The modern era of electron-electron interactions began a decade ago. Plummer's group initiated a program of using angular resolved photoemission to examine the band structure of the simple metals. Beginning with aluminum, and carrying on to sodium and potassium, they always found that the occupied energy bands were much narrower than expected. For example, the compressed energy bands for metallic potassium suggest a band effective mass of m* = 1.33m{sub e}. This should be compared to the band mass found from optical conductivity m*/m{sub e} = 1.01 {plus minus} 0.01. The discrepancy between these results is startling. It was this great difference which started my group doing calculations. Our program was two-fold. On one hand, we reanalyzed the experimental data, in order to see if Plummer's result was an experimental artifact. On the other hand, we completely redid the electron-electron self-energy calculations for simple metals, using the most modern choices of local-field corrections and vertex corrections. Our results will be reported in these lectures. They can be summarized as following: Our calculations give the same effective masses as the older calculations, so the theory is relatively unchanged; Our analysis of the experiments suggests that the recent measurements of band narrowing are an experimental artifact. 38 refs., 9 figs.

  18. Electron microscope studies

    International Nuclear Information System (INIS)

    Crewe, A.V.; Kapp, O.H.

    1990-01-01

    Our laboratory has made significant progress this year in devising improved electron-optical systems, in studying invertebrate hemoglobins with the STEM, and in achieving a workable sub-angstrom STEM. Our goal in electron optics is to improve resolution by producing spherical and chromatic aberration coefficients with signs opposite those of magnetic lenses. We have progressed toward this goal through calculations that explore the addition of electrodes to electron mirrors to reduce these two geometric aberrations and by devising a beam separation system that won't introduce asymmetrical aberrations. Some promising new designs of magnetic lenses for SEM applications have also been investigated. We have continued our exploration of the quaternary structure of the invertebrate hemoglobins and are now among the top laboratories in this area of expertise. In addition, we have overcome many of our electronic difficulties on the sub-angstrom STEM and have made significant progress toward achieving an operational system. The addition of an IBM RISC-6000 workstation to our lab has significantly increased our image processing capabilities

  19. Electron beams in radiation therapy

    International Nuclear Information System (INIS)

    Bruinvis, I.A.D.

    1987-01-01

    Clinical electron beams in interaction with beam flattening and collimating devices are studied, in order to obtain the means for adequate electron therapy. A treatment planning method for arbitrary field shapes is developed that takes the properties of the collimated electron beams into account. An electron multiple-scattering model is extended to incorporate a model for the loss of electrons with depth, in order to improve electron beam dose planning. A study of ionisation measurements in two different phantom materials yields correction factors for electron beam dosimetry. (Auth.)

  20. The electronic structures of solids

    CERN Document Server

    Coles, B R

    2013-01-01

    The Electronic Structures of Solids aims to provide students of solid state physics with the essential concepts they will need in considering properties of solids that depend on their electronic structures and idea of the electronic character of particular materials and groups of materials. The book first discusses the electronic structure of atoms, including hydrogen atom and many-electron atom. The text also underscores bonding between atoms and electrons in metals. Discussions focus on bonding energies and structures in the solid elements, eigenstates of free-electron gas, and electrical co

  1. Radiative electron capture [REC

    International Nuclear Information System (INIS)

    Vane, C.R.; Datz, S.; Dittner, P.; Giese, J.; Gomez del Campo, J.; Jones, N.; Krause, H.; Miller, P.D.; Schoere, H.; Schulz, M.

    1989-01-01

    This paper contains experimental data on ion channeling in solids. The x-ray spectrum for 160 MeV sulfur ions passing through a silicon target is given. Peaks are due to target and projectile K x-rays and from L- and L-radiative electron capture (REC) processes in which a target electron is transfered to the L- or K-shell, respectively, of a bare- or one-electron sulfur projectile ion moving in the solid and a photon is emitted which carries away the excess energy.lso given is (1) the x-ray spectrum for 160 MeV bare sulfur ions axially channeled through silicon, (2) charge state distributions of sulfur ions exiting a silicon crystal in channeling and random orientations, (3) schematic representations of the REC process, (4) cross sections for radiative recombination and REC, (5) REC portions of x-ray spectra for bare sulfur ions channeled axially through a silicon crystal, (6) measured and calculated K-REC peak positions for bare- and one-electron sulfur ions channeled through silicon crystals, (7) measured and calculated widths of the K-REC peaks for bare sulfur ions channeled in silicon crystals, (8) K-REC peak centroid position results for 120 to 130 MeV sulfur 16+, (9) yield of K-REC x-rays from bare sulfur ions channeled through silicon crystals, (10) x-ray spectra generated by bare oxygen ions traversing a hydrogen gas, and (11) comparison between x-ray data and a computer generated simulation based on radiative electron capture from an atomic hydrogen target

  2. Electronics for LHC experiments

    International Nuclear Information System (INIS)

    Bourgeois, Francois

    1995-01-01

    Full text: A major effort is being mounted to prepare the way handling the high interaction rates expected from CERN's new LHC proton-proton collider (see, for example, November, page 6). September saw the First Workshop on Electronics for LHC Experiments, organized by Lisbon's Particle Physics Instrumentation Laboratory (LIP) on behalf of CERN's LHC Electronics Review Board (LERB - March, page 2). Its purpose was not only for the LERB to have a thorough review of ongoing activities, but also to promote cross fertilization in the engineering community involved in electronics design for LHC experiments. The Workshop gathered 187 physicists and engineers from 20 countries including USA and Japan. The meeting comprised six sessions and 82 talks, with special focus on radiation-hard microelectronic processes, electronics for tracking, calorimetry and muon detectors, optoelectronics, trigger and data acquisition systems. Each topic was introduced by an invited speaker who reviewed the requirements set by the particular detector technology at LHC. At the end of each session, panel discussions were chaired by each invited speaker. Representatives from four major integrated circuit manufacturers covered advanced radiation hard processes. Two talks highlighted the importance of obsolescence and quality systems in the long-lived and demanding environment of LHC. The Workshop identified areas and encouraged efforts for rationalization and common developments within and between the different detector groups. As a result, it will also help ensure the reliability and the long term maintainability of installed equipment. The proceedings of the Workshop are available from LIP Lisbon*. The LERB Workshop on Electronics for LHC Experiments will become a regular event, with the second taking place in Hungary, by Lake Balaton, from 23-27 September 1996. The Hungarian institutes KFKIRMKI have taken up the challenge of being as successful as LIP Lisbon in the organization

  3. Decal electronics for printed high performance cmos electronic systems

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-11-23

    High performance complementary metal oxide semiconductor (CMOS) electronics are critical for any full-fledged electronic system. However, state-of-the-art CMOS electronics are rigid and bulky making them unusable for flexible electronic applications. While there exist bulk material reduction methods to flex them, such thinned CMOS electronics are fragile and vulnerable to handling for high throughput manufacturing. Here, we show a fusion of a CMOS technology compatible fabrication process for flexible CMOS electronics, with inkjet and conductive cellulose based interconnects, followed by additive manufacturing (i.e. 3D printing based packaging) and finally roll-to-roll printing of packaged decal electronics (thin film transistors based circuit components and sensors) focusing on printed high performance flexible electronic systems. This work provides the most pragmatic route for packaged flexible electronic systems for wide ranging applications.

  4. Determination of the electron-electron collisional frequency by means of plasma electron spectroscopy

    International Nuclear Information System (INIS)

    Kolokolov, N.B.; Kudryavtsev, A.A.; Romanenko, V.A.

    1989-01-01

    Methods of controlling fast part of electron distribution function (DF) in nonlocal regime of current-free plasma are suggested and realized. Artificially created step in DF fast part has a simple link with frequencies of electron-electron and elastic electron-atom collisions that may be defined in the corresponding experiments

  5. PREFACE: Correlated Electrons (Japan)

    Science.gov (United States)

    Miyake, Kazumasa

    2007-03-01

    This issue of Journal of Physics: Condensed Matter is dedicated to results in the field of strongly correlated electron systems under multiple-environment. The physics of strongly correlated electron systems (SCES) has attracted much attention since the discovery of superconductivity in CeCu_2 Si_2 by Steglich and his co-workers a quater-century ago. Its interest has been intensified by the discovery of high-Tc superconductivity in a series of cuprates with layered perovskite structure which are still under active debate. The present issue of Journal of Physics: Condensed Matter present some aspects of SCES physics on the basis of activities of a late project "Centre-Of-Excellence" supported by MEXT (Ministry of Education, Sports, Science, Culture and Technology of the Japanese Government). This project has been performed by a condensed matter physics group in the faculties of science and engineering science of Osaka University. Although this project also covers correlated phenomena in optics and nano-scale systems, we focus here on the issues of SCES related to superconductivity, mainly unconventional. The present issue covers the discussions on a new mechanism of superconductivity with electronic origin (critical valence fluctuation mechanism), interplay and unification of magnetism and superconductivity in SCES based on a systematic study of NQR under pressure, varieties of Fermi surface of Ce- and U-based SCES probed by the de Haas-van Alphen effect, electronic states probed by a bulk sensitive photoemission spectroscopy with soft X-ray, pressure induced superconductivity of heavy electron materials, pressure dependence of superconducting transition temperature based on a first-principle calculation, and new superconductors under very high-pressure. Some papers offer readers' reviews of the relevant fields and/or include new developments of this intriguing research field of SCES. Altogether, the papers within this issue outline some aspects of electronic states

  6. Basics of RF electronics

    CERN Document Server

    Gallo, A

    2011-01-01

    RF electronics deals with the generation, acquisition and manipulation of high-frequency signals. In particle accelerators signals of this kind are abundant, especially in the RF and beam diagnostics systems. In modern machines the complexity of the electronics assemblies dedicated to RF manipulation, beam diagnostics, and feedbacks is continuously increasing, following the demands for improvement of accelerator performance. However, these systems, and in particular their front-ends and back-ends, still rely on well-established basic hardware components and techniques, while down-converted and acquired signals are digitally processed exploiting the rapidly growing computational capability offered by the available technology. This lecture reviews the operational principles of the basic building blocks used for the treatment of high-frequency signals. Devices such as mixers, phase and amplitude detectors, modulators, filters, switches, directional couplers, oscillators, amplifiers, attenuators, and others are d...

  7. Electron Beam Ion Sources

    CERN Document Server

    Zschornacka, G.; Thorn, A.

    2013-12-16

    Electron beam ion sources (EBISs) are ion sources that work based on the principle of electron impact ionization, allowing the production of very highly charged ions. The ions produced can be extracted as a DC ion beam as well as ion pulses of different time structures. In comparison to most of the other known ion sources, EBISs feature ion beams with very good beam emittances and a low energy spread. Furthermore, EBISs are excellent sources of photons (X-rays, ultraviolet, extreme ultraviolet, visible light) from highly charged ions. This chapter gives an overview of EBIS physics, the principle of operation, and the known technical solutions. Using examples, the performance of EBISs as well as their applications in various fields of basic research, technology and medicine are discussed.

  8. Semiconductor Physical Electronics

    CERN Document Server

    Li, Sheng

    2006-01-01

    Semiconductor Physical Electronics, Second Edition, provides comprehensive coverage of fundamental semiconductor physics that is essential to an understanding of the physical and operational principles of a wide variety of semiconductor electronic and optoelectronic devices. This text presents a unified and balanced treatment of the physics, characterization, and applications of semiconductor materials and devices for physicists and material scientists who need further exposure to semiconductor and photonic devices, and for device engineers who need additional background on the underlying physical principles. This updated and revised second edition reflects advances in semicondutor technologies over the past decade, including many new semiconductor devices that have emerged and entered into the marketplace. It is suitable for graduate students in electrical engineering, materials science, physics, and chemical engineering, and as a general reference for processing and device engineers working in the semicondi...

  9. Keeping electronic records secure.

    Science.gov (United States)

    Easton, David

    2013-10-01

    Are electronic engineering maintenance records relating to the hospital estate or a medical device as important as electronic patient records? Computer maintenance management systems (CMMS) are increasingly being used to manage all-round maintenance activities. However, the accuracy of the data held on them, and a level of security that prevents tampering with records, or other unauthorised changes to them to 'cover' poor practice, are both essential, so that, should an individual be injured or killed on hospital grounds, and a law suit follow, the estates team can be confident that it has accurate data to prove it has fulfilled its duty of care. Here David Easton MSc CEng FIHEEM MIET, director of Zener Engineering Services, and chair of IHEEM's Medical Devices Advisory Group, discusses the issues around maintenance databases, and the security and integrity of maintenance data.

  10. Engineering limitations with electrons

    CERN Document Server

    Gröbner, Oswald

    1992-01-01

    The vacuum required for electron machines is determined by the beam lifetime and must be in the ultrahigh vacuum range. Since the emission of intense synchrotron radiation by the electron beam produces strong dynamic outgassing from the vacuum chamber, this gas load must be removed by a powerful, distributed pumping system. To achieve good beam lifetimes an extended in-situ cleaning (beam conditioning) by synchrotron radiation must be applied. High pumping speeds can be obtained using a distributed pumping system, e.g. based on linear, non-evaporable getter pumps. The absorption of the synchrotron radiation power, either by the vacuum chamber directly or on local aborbers,is closely linked to the design of the global system and to the choice of the vacuum chamber material.

  11. Pursuing prosthetic electronic skin

    Science.gov (United States)

    Chortos, Alex; Liu, Jia; Bao, Zhenan

    2016-09-01

    Skin plays an important role in mediating our interactions with the world. Recreating the properties of skin using electronic devices could have profound implications for prosthetics and medicine. The pursuit of artificial skin has inspired innovations in materials to imitate skin's unique characteristics, including mechanical durability and stretchability, biodegradability, and the ability to measure a diversity of complex sensations over large areas. New materials and fabrication strategies are being developed to make mechanically compliant and multifunctional skin-like electronics, and improve brain/machine interfaces that enable transmission of the skin's signals into the body. This Review will cover materials and devices designed for mimicking the skin's ability to sense and generate biomimetic signals.

  12. Applications for electronic documents

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1995-01-01

    This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

  13. Electron-molecule collisions

    CERN Document Server

    Takayanagi, Kazuo

    1984-01-01

    Scattering phenomena play an important role in modern physics. Many significant discoveries have been made through collision experiments. Amongst diverse kinds of collision systems, this book sheds light on the collision of an electron with a molecule. The electron-molecule collision provides a basic scattering problem. It is scattering by a nonspherical, multicentered composite particle with its centers having degrees of freedom of motion. The molecule can even disintegrate, Le., dissociate or ionize into fragments, some or all of which may also be molecules. Although it is a difficult problem, the recent theoretical, experimental, and computational progress has been so significant as to warrant publication of a book that specializes in this field. The progress owes partly to technical develop­ ments in measurements and computations. No less important has been the great and continuing stimulus from such fields of application as astrophysics, the physics of the earth's upper atmosphere, laser physics, radiat...

  14. Electrical and electronic principles

    CERN Document Server

    Knight, S A

    1991-01-01

    Electrical and Electronic Principles, 2, Second Edition covers the syllabus requirements of BTEC Unit U86/329, including the principles of control systems and elements of data transmission. The book first tackles series and parallel circuits, electrical networks, and capacitors and capacitance. Discussions focus on flux density, electric force, permittivity, Kirchhoff's laws, superposition theorem, arrangement of resistors, internal resistance, and powers in a circuit. The text then takes a look at capacitors in circuit, magnetism and magnetization, electromagnetic induction, and alternating v

  15. FRAUD IN ELECTRONIC COMMERCE

    OpenAIRE

    Valentin-Stelian Badescu

    2013-01-01

    Electronic commerce is experiencing a great extent, and about the same extent fraud seeks - and sometimes is the place to impressive levels. Moreover, computer fraud and, the actors' they do not seem to suffer from the global economic recession and get as sophisticated as a legitimate business model and one of the most important dimensions of the work of modern organizations is the manipulation of information (collection, processing, storage, distribution, etc.). This component informational ...

  16. FRAUD IN ELECTRONIC COMMERCE

    OpenAIRE

    Valentin – Stelian Bădescu

    2013-01-01

    Electronic commerce is experiencing a great extent, and about the same extent fraud seeks - and sometimes is the place to impressive levels. Moreover, computer fraud and, the actors' they do not seem to suffer from the global economic recession and get as sophisticated as a legitimate business model and one of the most important dimensions of the work of modern organizations is the manipulation of information (collection, processing, storage, distribution, etc.). This component in...

  17. ELECTRONIC COMMERCE PORTAL

    OpenAIRE

    Georgeta Soava

    2011-01-01

    Today companies are faced with the need to exploit technology changing computer environments, in order to improve customer satisfaction and reduce costs. A successful approach to electronic portals is an effective demonstration of the new ways of relating to the client. The objectives that we have considered for the realization of e-commerce portal can be summarized as follows: structured communication, effective collaboration, complet and closed circuit of orders and deliveries, inventory op...

  18. Electronic Packaging Techniques

    Science.gov (United States)

    1979-01-01

    A characteristic of aerospace system design is that equipment size and weight must always be kept to a minimum, even in small components such as electronic packages. The dictates of spacecraft design have spawned a number of high-density packaging techniques, among them methods of connecting circuits in printed wiring boards by processes called stitchbond welding and parallel gap welding. These processes help designers compress more components into less space; they also afford weight savings and lower production costs.

  19. Xyce parallel electronic simulator.

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Rankin, Eric Lamont; Schiek, Richard Louis; Thornquist, Heidi K.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Santarelli, Keith R.

    2010-05-01

    This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide.

  20. Relativistic electron beam device

    Science.gov (United States)

    Freeman, J.R.; Poukey, J.W.; Shope, S.L.; Yonas, G.

    1975-07-01

    A design is given for an electron beam device for irradiating spherical hydrogen isotope bearing targets. The accelerator, which includes hollow cathodes facing each other, injects an anode plasma between the cathodes and produces an approximately 10 nanosecond, megajoule pulse between the anode plasma and the cathodes. Targets may be repetitively positioned within the plasma between the cathodes, and accelerator diode arrangement permits materials to survive operation in a fusion power source. (auth)

  1. Implantable electronic medical devices

    CERN Document Server

    Fitzpatrick, Dennis

    2014-01-01

    Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

  2. Electrons in Nanostructures

    DEFF Research Database (Denmark)

    Flindt, Christian

    2007-01-01

    This thesis concerns theoretical aspects of electrons in man-made nanostruc- tures. Advances in nanofabrication technology during recent decades have made it possible to produce electrical devices on the nano-scale, whose func- tionality is determined by the quantum mechanical nature of a single ...... is illustrated with applications to two nano-electromechanical systems and is ¯nally ex- tended such that it also takes into account possible memory e®ects in the transport....

  3. Graphene for future electronics

    International Nuclear Information System (INIS)

    Pasanen, Pirjo; Voutilainen, Martti; Helle, Meri; Song Xuefeng; Hakonen, Pertti J

    2012-01-01

    We discuss some aspects of how graphene could be used in mainstream electronic devices. The main focus is on signal processing applications in high-volume, industrially manufactured battery-powered devices, e.g. mobile phones and laptop computers, but we will also discuss applicability to other components like interconnects, wireless communication antennae and camera sensors, as well as novel types of signal processing devices, based on the unique physical properties of graphene.

  4. Computational Electronics and Electromagnetics

    Energy Technology Data Exchange (ETDEWEB)

    DeFord, J.F.

    1993-03-01

    The Computational Electronics and Electromagnetics thrust area is a focal point for computer modeling activities in electronics and electromagnetics in the Electronics Engineering Department of Lawrence Livermore National Laboratory (LLNL). Traditionally, they have focused their efforts in technical areas of importance to existing and developing LLNL programs, and this continues to form the basis for much of their research. A relatively new and increasingly important emphasis for the thrust area is the formation of partnerships with industry and the application of their simulation technology and expertise to the solution of problems faced by industry. The activities of the thrust area fall into three broad categories: (1) the development of theoretical and computational models of electronic and electromagnetic phenomena, (2) the development of useful and robust software tools based on these models, and (3) the application of these tools to programmatic and industrial problems. In FY-92, they worked on projects in all of the areas outlined above. The object of their work on numerical electromagnetic algorithms continues to be the improvement of time-domain algorithms for electromagnetic simulation on unstructured conforming grids. The thrust area is also investigating various technologies for conforming-grid mesh generation to simplify the application of their advanced field solvers to design problems involving complicated geometries. They are developing a major code suite based on the three-dimensional (3-D), conforming-grid, time-domain code DSI3D. They continue to maintain and distribute the 3-D, finite-difference time-domain (FDTD) code TSAR, which is installed at several dozen university, government, and industry sites.

  5. Electron attachment in tetrafluoromethane

    International Nuclear Information System (INIS)

    Dutton, J.; Lucas, A.K.; Williams, A.W.; Goodings, A.

    1987-01-01

    A pulsed drift-tube technique has been employed to measure electron attachment coefficients in CF 4 . Previous measurements have been extended from approx. 45 Td to approx. 20 Td [1 Td = 10 -21 Vm 2 ] showing a decrease in the reduced attachment coefficient of approx. 2 orders of magnitude through this range of E/N [electric field/gas number density]. Absolute attachment coefficients as low as 1 x 10 -4 cm -1 have been determined. (author)

  6. Electronic healthcare information security

    CERN Document Server

    Dube, Kudakwashe; Shoniregun, Charles A

    2010-01-01

    The ever-increasing healthcare expenditure and pressing demand for improved quality and efficiency of patient care services are driving innovation in healthcare information management. The domain of healthcare has become a challenging testing ground for information security due to the complex nature of healthcare information and individual privacy. ""Electronic Healthcare Information Security"" explores the challenges of e-healthcare information and security policy technologies. It evaluates the effectiveness of security and privacy implementation systems for anonymization methods and techniqu

  7. ELECTRONIC HUMAN RESOURCE MANAGEMENT

    OpenAIRE

    Dr. M. Panneerselvam

    2017-01-01

    Electronic Human Resource Management is an essence the revolution of human resource functions to management and employees. These functions are typically used via intranet and web technology. This helps the organization to improve their standards where they can able to review and forward. All those documents can be viewed within a fraction of second with help of client and server links. The phenomenon of E- HRM deserves closer and more fundamental roots to HR activity. The E-HRM develops and b...

  8. CERN Electronics Pool presentations

    CERN Multimedia

    2011-01-01

    The CERN Electronics Pool has organised a series of presentations in collaboration with oscilloscope manufacturers. The last one will take place according to the schedule below.   Time will be available at the end of the presentation to discuss your personal needs. The Agilent presentation had to be postponed and will be organised later. -     Lecroy: Thursday, 24 November 2011, in 530-R-030, 14:00 to 16:30.

  9. Superconducting rotating electronic machine

    International Nuclear Information System (INIS)

    Cheon, Hui Yeong

    1989-04-01

    This book is divided into ten chapters, which handles summary of superconducting electronic machine, aspect of using of superconductor, superconducting direct current : Homopolar D. C. Machines, Drum machines, segmented slip-ring principle and carbon fibre brushes, superconducting alternating current turbine generator, design of superconducting alternating current machine, performance of superconducting alternating current machine, superconducting turbo generator by new rotor design, basic design of superconducting current generator, generator and power model, design of rotor and information of material property.

  10. Dealing with electronics

    CERN Document Server

    Drosg, Manfred

    2014-01-01

    By using a holistic approach in the understanding of the various circuits and by taking ample advantage of the duality between the electrical quantities voltage and current the understanding of the properties of electronic circuits is made easier. This approach reduces the amount of mathematics needed for a deeper understanding. This graduate textbook aims at completeness regarding the construction of possible circuits and their classification.

  11. Electronic Collaboration Logbook

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    At FNAL, we developed an Electronic Collaboration Logbook (ECL) application which is used by about 20 different collaborations, experiments and groups at FNAL. ECL is the latest iteration of the project formerly known as Control Room Logbook (CRL). We have been working on mobile (IOS and Android) clients for ECL. We will present history, current status and future plans of the project, as well as design, implementation and support solutions made by the project.

  12. Graphene Electronic Tattoo Sensors.

    Science.gov (United States)

    Kabiri Ameri, Shideh; Ho, Rebecca; Jang, Hongwoo; Tao, Li; Wang, Youhua; Wang, Liu; Schnyer, David M; Akinwande, Deji; Lu, Nanshu

    2017-08-22

    Tattoo-like epidermal sensors are an emerging class of truly wearable electronics, owing to their thinness and softness. While most of them are based on thin metal films, a silicon membrane, or nanoparticle-based printable inks, we report sub-micrometer thick, multimodal electronic tattoo sensors that are made of graphene. The graphene electronic tattoo (GET) is designed as filamentary serpentines and fabricated by a cost- and time-effective "wet transfer, dry patterning" method. It has a total thickness of 463 ± 30 nm, an optical transparency of ∼85%, and a stretchability of more than 40%. The GET can be directly laminated on human skin just like a temporary tattoo and can fully conform to the microscopic morphology of the surface of skin via just van der Waals forces. The open-mesh structure of the GET makes it breathable and its stiffness negligible. A bare GET is able to stay attached to skin for several hours without fracture or delamination. With liquid bandage coverage, a GET may stay functional on the skin for up to several days. As a dry electrode, GET-skin interface impedance is on par with medically used silver/silver-chloride (Ag/AgCl) gel electrodes, while offering superior comfort, mobility, and reliability. GET has been successfully applied to measure electrocardiogram (ECG), electromyogram (EMG), electroencephalogram (EEG), skin temperature, and skin hydration.

  13. The SPEDE electron spectrometer

    CERN Document Server

    O'Neill, George

    This thesis presents SPEDE (SPectrometer for Electron DEtection) and documents its construction, testing and performance during commissioning at Jyvaskyla, Finland, before deployment at the HIE-ISOLDE facility at CERN coupled with the MINIBALL array to perform in-beam electron-gamma spectroscopy using post-accelerated radioactive ion beams. Commissioning experiments took place in two two-day stints during spring 2015, coupled with several JUROGAMII gamma-detectors. This spectrometer will help aid in fully understanding exotic regions of the nuclear chart such as regions with a high degree of octupole deformation, and in those nuclei exhibiting shape coexistence. For the rst time, electron spectroscopy has been performed at the target position from states populated in accelerated nuclei via Coulomb excitation. The FWHM of SPEDE is approximately 7 keV at 320 keV, and Doppler correction was possible to improve Doppler broadened peaks. The results are intended to give the reader a full understanding of the dete...

  14. Electronic Noses and Applications

    Directory of Open Access Journals (Sweden)

    Martine LUMBRERAS

    2014-05-01

    Full Text Available Electronic noses are customized devices employed to detect and to identify gaseous mixtures, even to give the concentration of the atmosphere components. Nowadays, the research in this domain is more and more growing, in Europe and other countries in the world, for many applications, such as environmental protection, food industries, perfumery, public safety, medicine, and pharmacy. Electronic noses allow to detect many organic volatile compounds, for which there is no specific detector. They constitute an alternative to complex, long, and too expensive existing methods, unable to ensure continuous monitoring. Their conception deals with many related areas (metrology, chemistry, physics, electronics, informatics, statistics, modelisation as well as areas related to the molecules to be detected. The system training is a primary step: during a measurement under a gaseous atmosphere, we must record the sensor time-responses in a treatment system, while specifying the name of the concerned odor. This process must be repeated many times for each studied atmosphere, and for all the chosen atmospheres. So a learning data base can be created, made from representative parameters of all the realized measures. After this training stage, clustering software will classify the data analysis in “concentration” or “nature” groups. Using the group separation rules given by this supervised classification, the system will be able to find itself the name of an odor or a concentration.

  15. Electron beam transport

    International Nuclear Information System (INIS)

    Rudjak, Yu.V.; Vladyko, V.B.

    1993-01-01

    The electron beam transport in ion channel has been investigated. The influence of the external longitudinal magnetic field and self beam magnetic field on the charge neutralization process was defined. Beam head erosion under channel is curved or the availability of transverse external magnetic field was numerically simulated. The numerical investigation of the ion-hose instability was performed. The conditions, when as a result of ion-hose instability development may be coming out of the channel by beam tail, were founded. It was shown, that supplementary creation of plasma by electron beam and ions did not lead to the reduction of ion-hose instability. Sufficient slowing down of ion-hose instability development could be achieved if betatron length increased to impulse tail. In the case of a weak initial nonsymmetrical perturbation, sausage instability was investigated. Numerical simulation showed that this instability could lead to beam radius increasing in order. The electron beam guiding by low conductive plasma channel was considered. The attractive force of beam to this channel under nonsymmetrical injection was defined analytically

  16. Neutron induced electron radiography

    International Nuclear Information System (INIS)

    Andrade, Marcos Leandro Garcia

    2008-01-01

    In the present paper a new radiography technique, the 'Neutron Induced Electron Radiography' - NIER, to inspect low thickness samples on the order of micra, has been developed. This technique makes use of low energy electrons as penetrating radiation generated from metallic gadolinium screens when irradiated by thermal neutrons. The conditions to obtain the best image for the conventional X-ray film Kodak-AA were determined by using a digital system to quantify the darkening level of the film. The irradiations have been performed at a radiography equipment installed at the beam-hole no. 8 of the 5 MW IEA-R1 nuclear research reactor of IPEN-CNEN/SP. The irradiation time to obtain the best radiography was 100 seconds and for such condition the technique was able to discern 1 μm in 24 μm of aluminum at a resolution of 32 μm. By visual comparison the images obtained by the NIER shown a higher quality when compared with the ones from other usual techniques the make use of electrons a penetrating radiation and films for image registration. Furthermore the use of the digital system has provided a smaller time for data acquisition and data analysis as well as an improvement in the image visualization. (author)

  17. Electrons in Flatland

    Science.gov (United States)

    MacDonald, Allan

    2007-04-01

    Like the classical squares and triangles in Edwin Abbott's 19th century social satire and science fiction novel Flatland, electrons and other quantum particles behave differently when confined to a two-dimensional world. Condensed matter physicists have been intrigued and regularly suprised by two-dimensional electron systems since they were first studied in semiconductor field-effect-transistor devices over forty years ago. I will discuss some important milestones in the study of two-dimensional electrn systems, from the discoveries of the integer and fractional quantum Hall effects in the 1980's to recent quantum Hall effect work on quasiparticles with non-Abelian quantum statistics. Special attention will be given to a new electronic Flatland that has risen to prominence recently, graphene, which consists of a single sheet of carbon atoms in a honeycomb lattice arrangement. Graphene provides a realization of two-dimensional massless Dirac fermions which interact via nearly instantaneous Coulomb interactions. Early research on graphene has demonstrated yet again that Flatland exceeds expectations.

  18. Transformational silicon electronics

    KAUST Repository

    Rojas, Jhonathan Prieto

    2014-02-25

    In today\\'s traditional electronics such as in computers or in mobile phones, billions of high-performance, ultra-low-power devices are neatly integrated in extremely compact areas on rigid and brittle but low-cost bulk monocrystalline silicon (100) wafers. Ninety percent of global electronics are made up of silicon. Therefore, we have developed a generic low-cost regenerative batch fabrication process to transform such wafers full of devices into thin (5 μm), mechanically flexible, optically semitransparent silicon fabric with devices, then recycling the remaining wafer to generate multiple silicon fabric with chips and devices, ensuring low-cost and optimal utilization of the whole substrate. We show monocrystalline, amorphous, and polycrystalline silicon and silicon dioxide fabric, all from low-cost bulk silicon (100) wafers with the semiconductor industry\\'s most advanced high-κ/metal gate stack based high-performance, ultra-low-power capacitors, field effect transistors, energy harvesters, and storage to emphasize the effectiveness and versatility of this process to transform traditional electronics into flexible and semitransparent ones for multipurpose applications. © 2014 American Chemical Society.

  19. Electronic Health Object

    Science.gov (United States)

    Almunawar, Mohammad Nabil; Anshari, Muhammad; Younis, Mustafa Z.; Kisa, Adnan

    2015-01-01

    Electronic health records (EHRs) store health-related patient information in an electronic format, improving the quality of health care management and increasing efficiency of health care processes. However, in existing information systems, health-related records are generated, managed, and controlled by health care organizations. Patients are perceived as recipients of care and normally cannot directly interact with the system that stores their health-related records; their participation in enriching this information is not possible. Many businesses now allow customers to participate in generating information for their systems, strengthening customer relationships. This trend is supported by Web 2.0, which enables interactivity through various means, including social networks. Health care systems should be able to take advantage of this development. This article proposes a novel framework in addressing the emerging need for interactivity while preserving and extending existing electronic medical data. The framework has 3 dimensions of patient health record: personal, social, and medical dimensions. The framework is designed to empower patients, changing their roles from static recipient of health care services to dynamic and active partners in health care processes. PMID:26660486

  20. Electronic Recruitment at CERN

    CERN Multimedia

    2004-01-01

    The Human Resources Department switches to electronic recruitment. From now on whenever you are involved in a recruitment action you will receive an e-mail giving you access to a Web folder. Inside you will find a shortlist of applications drawn up by the Human Resources Department. This will allow you to consult the folder, at the same time as everyone else involved in the recruitment process, for the vacancy you are interested in. This new electronic recruitment system, known as e-RT, will be introduced in a presentation given at 10 a.m. on 11 February in the Main Auditorium. Implemented by AIS (Administrative Information Services) and the Human Resources Department, e-RT will cover vacancies open in all of CERN's recruitment programmes. The electronic application system was initially made available to technical students in July 2003. By December it was extended to summer students, fellows, associates and Local Staff. Geraldine Ballet from the Recruitment Service prefers e-RT to mountains of paper! The Hu...

  1. Electron Holography: phases matter.

    Science.gov (United States)

    Lichte, Hannes

    2013-06-01

    Essentially, all optics is wave optics, be it with light, X-rays, neutrons or electrons. The information transfer from the object to the image can only be understood in terms of waves given by amplitude and phase. However, phases are difficult to measure: for slowly oscillating waves such as sound or low-frequency electromagnetic waves, phases can be measured directly; for high frequencies this has to be done by heterodyne detection, i.e. superposition with a reference and averaging over time. In optics, this is called interferometry. Because interference is mostly very difficult to achieve, phases have often been considered 'hidden variables' seemingly pulling the strings from backstage, only visible by their action on the image intensity. This was almost the case in conventional Electron Microscopy with the phase differences introduced by an object. However, in the face of the urgent questions from solid state physics and materials science, these phases have to be determined precisely, because they encode the most dominant object properties, such as charge distributions and electromagnetic fields. After more than six decades of very patient advancement, electron interferometry and holography offer unprecedented analytical facilities down to an atomic scale. Akira Tonomura has prominently contributed to the present state.

  2. Nanotechnology in paper electronics

    Science.gov (United States)

    Demming, Anna; Österbacka, Professor Ronald; Han, Jin-Woo, Dr

    2014-03-01

    The ability to put cutting edge technology on paper—not in words but in a working physical form—has been attracting an increasing number of researchers over the past decade. Paper has many advantages that make it attractive for flexible electronics: it is relatively environmentally benign; it is renewable; it can be recycled; it is light weight; production processes for paper are well advanced; and it is inexpensive. This special issue, with guest editors Ronald Österbacka from Åbo Akademi University in Finland and Jin-Woo Han from the NASA AMES Research Center, features some of the latest in paper electronics research, including developments towards applications in displays, sensing and alternative energy sources, as well as fundamental studies to further our understanding of how paper can be most effectively used in electronics. As Andrew Steckl and colleagues in the US point out, 'Cellulose-based paper substrates were implemented as an electronic substrate as early as 1969, with most advancement occurring in the past decade largely due to technology improvements in thin film deposition and organic materials' [1, 2]. They report a detailed comparison between paper, standard liquid crystal display rigid glass and flexible glass for hosting pentacene organic thin film transistors, and obtain promising results for future paper-based devices. As most meaningful electronic devices rely on transistors to function, transistors feature quite prominently in this special issue. Rodrigo Martins and colleagues in France and Portugal study the effect of fibre type, structure and dimension on paper-based transistors and reveal further insights into how paper properties affect device performance [3]. Qing Wan and colleagues in China bring the state of the art in transistor technology to paper substrates [4], fabricating indium-zinc-oxide (IZO)-based protonic/electronic hybrid thin film transistors on paper and showing that they can be used as artificial synapses. Like the

  3. Good Security Practices for Electronic Commerce, Including Electronic Data Interchange

    National Research Council Canada - National Science Library

    Saltman, Roy

    1993-01-01

    Electronic commerce (EC) is the use of documents in electronic form, rather than paper, for carrying out functions of business or government that require interchange of information, obligations, or monetary value between organizations...

  4. Evaporator line for special electron tubes, in particular electron multipliers

    International Nuclear Information System (INIS)

    Richter, M.

    1984-01-01

    The invention has been aimed at reducing the effort for preventing short circuits in achieving certain material-dependent effects e.g. secondary emission, by deposition through evaporation in the production of electron tubes, in particular electron multipliers

  5. Understand electrical and electronics maths

    CERN Document Server

    Bishop, Owen

    1993-01-01

    Understand Electrical and Electronics Maths covers elementary maths and the aspects of electronics. The book discusses basic maths including quotients, algebraic fractions, logarithms, types of equations and balancing of equations. The text also describes the main features and functions of graphs and the solutions to simpler types of electronics problems. The book then tackles the applications of polar coordinates in electronics, limits, differentiation and integration, and the applications of maths of rates of change in electronics. The activities of an electronic circuit; techniques of math

  6. Advances in electron transfer chemistry

    CERN Document Server

    Mariano, Patrick S

    1993-01-01

    Advances in Electron Transfer Chemistry, Volume 3 presents studies that discuss findings in the various aspects of electron chemistry. The book is comprised of four chapters; each chapter reviews a work that tackles an issue in electron transfer chemistry. Chapter 1 discusses the photoinduced electron transfer in flexible biaryl donor-acceptor molecules. Chapter 2 tackles light-induced electron transfer in inorganic systems in homogeneous and heterogeneous phases. The book also covers internal geometry relaxation effects on electron transfer rates of amino-centered systems. The sequential elec

  7. Electron Cooling Study for MEIC

    International Nuclear Information System (INIS)

    Electron cooling of the ion beams is one critical R&D to achieve high luminosities in JLab's MEIC proposal. In the present MEIC design, a multi-staged cooling scheme is adapted, which includes DC electron cooling in the booster ring and bunched beam electron cooling in the collider ring at both the injection energy and the collision energy. We explored the feasibility of using both magnetized and non-magnetized electron beam for cooling, and concluded that a magnetized electron beam is necessary. Electron cooling simulation results for the newly updated MEIC design is also presented.

  8. Practical analog electronics for technicians

    CERN Document Server

    Kimber, W A

    2013-01-01

    'Practical Analog Electronics for Technicians' not only provides an accessible introduction to electronics, but also supplies all the problems and practical activities needed to gain hands-on knowledge and experience. This emphasis on practice is surprisingly unusual in electronics texts, and has already gained Will Kimber popularity through the companion volume, 'Practical Digital Electronics for Technicians'. Written to cover the Advanced GNVQ optional unit in electronics, this book is also ideal for BTEC National, A-level electronics and City & Guilds courses. Together with 'Practical Digit

  9. SIZINTI SUYUNUN ARITIMI İÇİN SU MERCİMEKLERİ KARIŞIMININ KULLANILMASI: I. NUTRİENTLER

    Directory of Open Access Journals (Sweden)

    Murat Topal

    2012-08-01

    Full Text Available Bu çalışmada, sızıntı suyu arıtımı için Lemna gibba L., Lemna minor L., Spirodela polyrrhiza ve Wolffia arrhiza’dan oluşan su mercimekleri karışımı kullanılmış ve bitkili kesikli sistemde nutrientlerin değişimleri araştırılmıştır. Çalışmada, NH4+-N, NO2--N, NO3—N ve O-PO43- konsantrasyonları tespit edilmiştir. Deneysel çalışmalar 2 farklı derinlikte (5 ve 10 cm ve farklı hidrolik bekletme sürelerinde gerçekleştirilmiştir. En yüksek NH4+-N giderim verimi (%75,3, 5 cm derinlikteki reaktörde 9. günde tespit edilmiştir. NO2- -N ve NO3- -N konsantrasyonlarında herhangi bir giderim olmadığı gözlenmiştir. En yüksek O-PO43- giderim verimi 5 cm derinlikteki reaktörde %44,6 olarak tespit edilmiştir.

  10. SIZINTI SUYUNUN ARITIMI İÇİN SU MERCİMEKLERİ KARIŞIMININ KULLANILMASI: II. DİĞER PARAMETRELER

    Directory of Open Access Journals (Sweden)

    Murat Topal

    2012-08-01

    Full Text Available Bu çalışmada, sızıntı suyu arıtımı için Lemna gibba L., Lemna minor L., Spirodela polyrrhiza ve Wolffia arrhiza’dan oluşan su mercimekleri karışımı kullanılmış ve bitkili kesikli sistemde KOİ, pH ve elektriksel iletkenlik değişimleri araştırılmıştır. Deneysel çalışmalar, 4 adet reaktörde oda sıcaklığında gerçekleştirilmiştir. En yüksek KOİ giderim verimi, 5 ve 10 cm derinlikteki reaktörlerde sırasıyla %62,2 ve %60,1 olarak tespit edilmiştir. Başlangıçta 7,91 değerinde olan pH, farklı hidrolik bekletme sürelerinde 7,91-8,49 arasında olmuştur. Başlangıçta 5,59 mS/cm değerinde olan elektriksel iletkenlik, en yüksek 9,46 mS/cm değerine ulaşmıştır.

  11. Spectroscopy of electron irradiated polymers in electron microscope

    International Nuclear Information System (INIS)

    Faraj, S.H.; Salih, S.M.

    1981-01-01

    The damage induced by energetic electrons in the course of irradiation of polymers in a transmission electron microscope was investigated spectroscopically. Damage on the molecular level has been detected at very low exposure doses. These effects have been induced by electron doses less than that received by the specimen when it is situated at its usual place of the specimen stage in the electron microscope by a factor of 1,000. (author)

  12. Electron-excited molecule interactions

    International Nuclear Information System (INIS)

    Christophorou, L.G.; Tennessee Univ., Knoxville, TN

    1991-01-01

    In this paper the limited but significant knowledge to date on electron scattering from vibrationally/rotationally excited molecules and electron scattering from and electron impact ionization of electronically excited molecules is briefly summarized and discussed. The profound effects of the internal energy content of a molecule on its electron attachment properties are highlighted focusing in particular on electron attachment to vibrationally/rotationally and to electronically excited molecules. The limited knowledge to date on electron-excited molecule interactions clearly shows that the cross sections for certain electron-molecule collision processes can be very different from those involving ground state molecules. For example, optically enhanced electron attachment studies have shown that electron attachment to electronically excited molecules can occur with cross sections 10 6 to 10 7 times larger compared to ground state molecules. The study of electron-excited molecule interactions offers many experimental and theoretical challenges and opportunities and is both of fundamental and technological significance. 54 refs., 15 figs

  13. Electron-cyclotron-resonant-heated electron distribution functions

    International Nuclear Information System (INIS)

    Matsuda, Y.; Nevins, W.M.; Cohen, R.H.

    1981-01-01

    Recent studies at Lawrence Livermore National Laboratory (LLNL) with a bounce-averaged Fokker-Planck code indicate that the energetic electron tail formed by electron-cyclotron resonant heating (ECRH) at the second harmonic is not Maxwellian. We present the results of our bounce-averaged Fokker-Planck code along with some simple analytic models of hot-electron distribution functions

  14. Characterization of an Electron Gun for Hollow Electron Beam Collimation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Siqi [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Stancari, Giulio [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2012-08-01

    Hollow electron beam collimation (HEBC) is a new technique developed to complement conventional beam collimation system to remove beam halo in a controlled fashion. We study the characteristics of the electron gun that produces the hollow electron beam. Cathode yield and beam profile measurements are used to extract information on gun performance. Results of characteristic measurements are presented.

  15. Collection of secondary electrons in scanning electron microscopes

    Czech Academy of Sciences Publication Activity Database

    Müllerová, Ilona; Konvalina, Ivo

    2009-01-01

    Roč. 236, č. 3 (2009), s. 203-210 ISSN 0022-2720 R&D Projects: GA MŠk OE08012; GA AV ČR IAA100650803 Institutional research plan: CEZ:AV0Z20650511 Keywords : detection of electrons * magnetic lenses * secondary electrons * SEM Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.612, year: 2009

  16. Attainment of Electron Beam Suitable for Medium Energy Electron Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Seletskiy, Sergei M. [Univ. of Rochester, NY (United States)

    2005-01-01

    Electron cooling of charged particle beams is a well-established technique at electron energies of up to 300 keV. However, up to the present time the advance of electron cooling to the MeV-range energies has remained a purely theoretical possibility. The electron cooling project at Fermilab has recently demonstrated the ¯rst cooling of 8.9 GeV/c antiprotons in the Recycler ring, and therefore, has proved the validity of the idea of relativistic electron cool- ing. The Recycler Electron Cooler (REC) is the key component of the Teva- tron Run II luminosity upgrade project. Its performance depends critically on the quality of electron beam. A stable electron beam of 4.3 MeV car- rying 0.5 A of DC current is required. The beam suitable for the Recycler Electron Cooler must have an angular spread not exceeding 200 ¹rad. The full-scale prototype of the REC was designed, built and tested at Fermilab in the Wideband laboratory to study the feasibility of attaining the high-quality electron beam. In this thesis I describe various aspects of development of the Fermilab electron cooling system, and the techniques used to obtain the electron beam suitable for the cooling process. In particular I emphasize those aspects of the work for which I was principally responsible.

  17. Electronic excitation of Na atom by electron impact

    International Nuclear Information System (INIS)

    Bielschowsky, C.E.; Souza, G.G.B. de; Lucas, C.A.; Nogueira, J.C.

    1988-01-01

    Electronic excitation of the 3s-3p transition in the Na atom was studied by intermediate energy electron impact spectroscopy. Differential Cross Sections (DCS) and Generalized Oscillator Strenghts (GOS) were determined experimentally for 1 KeV electrons. Theoretical results within the First Born Approximation as well as Glauber theory, were also performed. (A.C.A.S.) [pt

  18. Effect of electron temperature on small-amplitude electron acoustic ...

    Indian Academy of Sciences (India)

    Sona Bansal

    2018-03-14

    Mar 14, 2018 ... Abstract. Effects of electron temperature on the propagation of electron acoustic solitary waves in plasma with stationary ions, cold and superthermal hot electrons is investigated in non-planar geometry employing reductive perturbation method. Modified Korteweg–de Vries equation is derived in the small ...

  19. Contribution of backscattered electrons to the total electron yield ...

    Indian Academy of Sciences (India)

    It is shown experimentally that under energetic electron bombardment the backscattered electrons from solid targets contribute significantly (∼ 80%) to the observed total electron yield, even for targets of high backscattering coefficients. It is further found that for tungsten ( = 74) with a backscattering coefficient of about 0.50 ...

  20. Getting started with electronic projects

    CERN Document Server

    Pretty, Bill

    2015-01-01

    This book is aimed at hobbyists with basic knowledge of electronics circuits. Whether you are a novice electronics project builder, a ham radio enthusiast, or a BeagleBone tinkerer, you will love this book.

  1. Workflow Management in Electronic Commerce

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Spaccapietra, S.; March, S.T.; Kambayashi, Y.

    In electronic commerce scenarios, effectiveness and efficiency of business process execution are of paramount importance for business success. Even more than in traditional commerce scenarios, they determine the chances of survival of organizations in fast moving, highly competitive electronic

  2. The development of electron crystallography

    International Nuclear Information System (INIS)

    Mackay, A.L.

    2001-01-01

    By the materials of the lecture delivered in the School on Electron Crystallography, Erice, Sicily, 1997 and published in Proceedings of NATO Advanced Study Institute on Electron Crystallography, Erice, Sicily, 1997, Series E, vol. 347, p. 1

  3. 35 years of electron scattering

    International Nuclear Information System (INIS)

    Walecka, J.D.

    1986-01-01

    Historical aspects of electron reaction physics are presented. The presently understood picture of nuclear structure and the electron-nucleus interactions are discussed within the framework of the standard model

  4. Radiation Dose from Reentrant Electrons

    Science.gov (United States)

    Badhwar, G.D.; Cleghorn, T. E.; Watts, J.

    2003-01-01

    In estimating the crew exposures during an EVA, the contribution of reentrant electrons has always been neglected. Although the flux of these electrons is small compared to the flux of trapped electrons, their energy spectrum extends to several GeV compared to about 7 MeV for trapped electrons. This is also true of splash electrons. Using the measured reentrant electron energy spectra, it is shown that the dose contribution of these electrons to the blood forming organs (BFO) is more than 10 times greater than that from the trapped electrons. The calculations also show that the dose-depth response is a very slowly changing function of depth, and thus adding reasonable amounts of additional shielding would not significantly lower the dose to BFO.

  5. Electronics with carbon nanotubes

    International Nuclear Information System (INIS)

    Avouris, P.

    2007-01-01

    From mobile phones and laptops to Xboxes and iPods, it is difficult to think of any aspect of modern life that has not been touched by developments in electronics, computing and communications over the last few decades. Many of these technological advances have arisen from our ability to create ever smaller electronic devices, in particular silicon-based field effect transistors (FETs), which has led to denser, faster and less power-hungry circuits. The problem is that this device miniaturization, or 'scaling', cannot continue forever. Fundamental scientific and technological limitations exist that will make it impossible to build better performing silicon devices below a certain size. This potential show-stopper has inspired a worldwide effort to develop alternative device technologies based on 1D materials or those that exploit the spin, as well as the charge, of electrons. One promising and, in principle, simpler approach is to maintain the operating concept of today's silicon-based FETs but to replace a key component of the device - the semiconducting silicon channel - with 1D nanostructures that have much more versatile electrical-transport properties. Among the different 1D materials that have been developed, those with the most desirable properties are 'single-walled' carbon nanotubes, which were first created in 1993 by Sumio Ijima at the NEC Fundamental Research Laboratory in Tsukuba, Japan, and by Donald Bethune of IBM's Almaden Research Center in California. These materials are hollow tubes made from rolled up sheets of carbon just one atom thick, otherwise known as graphene. In the March issue of Physics World, Phaedon Avouris discusses some of the many properties and applications of carbon nanotubes, which he describes as an 'engineer's dream' because of their exceptionally high strength and heat conduction. (U.K.)

  6. Detectors - Electronics; Detecteurs - Electronique

    Energy Technology Data Exchange (ETDEWEB)

    Bregeault, J.; Gabriel, J.L.; Hierle, G.; Lebotlan, P.; Leconte, A.; Lelandais, J.; Mosrin, P.; Munsch, P.; Saur, H.; Tillier, J. [Lab. de Physique Corpusculaire, Caen Univ., 14 (France)

    1998-04-01

    The reports presents the main results obtained in the fields of radiation detectors and associated electronics. In the domain of X-ray gas detectors for the keV range efforts were undertaken to rise the detector efficiency. Multiple gap parallel plate chambers of different types as well as different types of X {yields} e{sup -} converters were tested to improve the efficiency (values of 2.4% at 60 KeV were reached). In the field of scintillators a study of new crystals has been carried out (among which Lutetium orthosilicate). CdTe diode strips for obtaining X-ray imaging were studied. The complete study of a linear array of 8 CdTe pixels has been performed and certified. The results are encouraging and point to this method as a satisfying solution. Also, a large dimension programmable chamber was used to study the influence of temperature on the inorganic scintillators in an interval from -40 deg. C to +150 deg. C. Temperature effects on other detectors and electronic circuits were also investigated. In the report mentioned is also the work carried out for the realization of the DEMON neutron multidetector. For neutron halo experiments different large area Si detectors associated with solid and gas position detectors were realized. In the frame of a contract with COGEMA a systematic study of Li doped glasses was undertaken aiming at replacing with a neutron probe the {sup 3}He counters presently utilized in pollution monitoring. An industrial prototype has been realised. Other studies were related to integrated analog chains, materials for Cherenkov detectors, scintillation probes for experiments on fundamental processes, gas position sensitive detectors, etc. In the field of associated electronics there are mentioned the works related to the multidetector INDRA, data acquisition, software gamma spectrometry, automatic gas pressure regulation in detectors, etc

  7. Diamond bio electronics.

    Science.gov (United States)

    Linares, Robert; Doering, Patrick; Linares, Bryant

    2009-01-01

    The use of diamond for advanced applications has been the dream of mankind for centuries. Until recently this dream has been realized only in the use of diamond for gemstones and abrasive applications where tons of diamonds are used on an annual basis. Diamond is the material system of choice for many applications, but its use has historically been limited due to the small size, high cost, and inconsistent (and typically poor) quality of available diamond materials until recently. The recent development of high quality, single crystal diamond crystal growth via the Chemical Vapor Deposition (CVD) process has allowed physcists and increasingly scientists in the life science area to think beyond these limitations and envision how diamond may be used in advanced applications ranging from quantum computing, to power generation and molecular imaging, and eventually even diamond nano-bots. Because of diamond's unique properties as a bio-compatible material, better understanding of diamond's quantum effects and a convergence of mass production, semiconductor-like fabrication process, diamond now promises a unique and powerful key to the realization of the bio-electronic devices being envisioned for the new era of medical science. The combination of robust in-the-body diamond based sensors, coupled with smart bio-functionalized diamond devices may lead to diamond being the platform of choice for bio-electronics. This generation of diamond based bio-electronic devices would contribute substantially to ushering in a paradigm shift for medical science, leading to vastly improved patient diagnosis, decrease of drug development costs and risks, and improved effectiveness of drug delivery and gene therapy programs through better timed and more customized solutions.

  8. Quantum electronics research

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Efficiency measurements in the rare gas excimers show that up to 50 percent of the energy deposited in a high-pressure rare gas by an electron beam can be converted to excimer fluorescence. The production kinetics and radiative properties of rare gas oxide excimers have been explored and show that short pulse lasers near 1 percent efficiency with energy storage of 10 J/liter can be constructed. The rare gas-halogen and dihalogen systems have been explored as a class of efficient radiators to complement the rare gas excimers. A Br 2 laser at 292 nm has been demonstrated, and XeBr fluorescence efficiency of 11 percent has been measured. An XeBr excimer-pumped atomic iodine laser has been demonstrated, and the systems considerations involved in scaling atomic iodine lasers to large sizes have been identified and are discussed. Oxygen, sulfur, and selenium have been analyzed as candidates for an optically pumped, visible energy storage laser. The physical and radiative properties of gaseous rare earth compounds, which may be suitable for energy storage lasers, have been measured and are discussed. Scaling considerations have been identified for drivers for large, electron-beam-pumped lasers. Theoretical studies bearing on an understanding of the basic atomic and molecular physics which must be understood for laser development and isotope separation projects have been carried out. These include efforts to develop a theoretical understanding rare-gas halogen structure and kinetics, copper vapor laser kinetics, electron interactions such as dissociative attachment, and other areas

  9. Rf Feedback free electron laser

    Science.gov (United States)

    Brau, Charles A.; Swenson, Donald A.; Boyd, Jr., Thomas J.

    1981-01-01

    A free electron laser system and electron beam system for a free electron laser which use rf feedback to enhance efficiency. Rf energy is extracted from an electron beam by decelerating cavities and returned to accelerating cavities using rf returns such as rf waveguides, rf feedthroughs, etc. This rf energy is added to rf klystron energy to lower the required input energy and thereby enhance energy efficiency of the system.

  10. Unbalanced field RF electron gun

    Science.gov (United States)

    Hofler, Alicia

    2013-11-12

    A design for an RF electron gun having a gun cavity utilizing an unbalanced electric field arrangement. Essentially, the electric field in the first (partial) cell has higher field strength than the electric field in the second (full) cell of the electron gun. The accompanying method discloses the use of the unbalanced field arrangement in the operation of an RF electron gun in order to accelerate an electron beam.

  11. Electron backscattering for process control in electron beam welding

    International Nuclear Information System (INIS)

    Ardenne, T. von; Panzer, S.

    1983-01-01

    A number of solutions to the automation of electron beam welding is presented. On the basis of electron backscattering a complex system of process control has been developed. It allows an enlarged imaging of the material's surface, improved adjustment of the beam focusing and definite focus positioning. Furthermore, both manual and automated positioning of the electron beam before and during the welding process has become possible. Monitoring of the welding process for meeting standard welding requirements can be achieved with the aid of a control quantity derived from the results of electronic evaluation of the high-frequency electron backscattering

  12. Characteristics of trapped electrons and electron traps in single crystals

    International Nuclear Information System (INIS)

    Budzinski, E.E.; Potter, W.R.; Potienko, G.; Box, H.C.

    1979-01-01

    Two additional carbohydrates are reported whose crystal structures trap electrons intermolecularly in single crystals x irradiated at low temperature, namely sucrose and rhamnose. Five carbohydrate and polyhydroxy compounds are now known which exhibit this phenomenon. The following characteristics of the phenomenon were investigated: (1) the hyperfine couplings of the electron with protons of the polarized hydroxy groups forming the trap; (2) the distances between these protons and the trapped electron; (3) the spin density of the electron at the protons and (4) the relative stabilities of the electron trapped in various crystal structures

  13. Owl: electronic datasheet generator.

    Science.gov (United States)

    Appleton, Evan; Tao, Jenhan; Wheatley, F Carter; Desai, Devina H; Lozanoski, Thomas M; Shah, Pooja D; Awtry, Jake A; Jin, Shawn S; Haddock, Traci L; Densmore, Douglas M

    2014-12-19

    Owl ( www.owlcad.org ) is a biodesign automation tool that generates electronic datasheets for synthetic biological parts using common formatting. Data can be retrieved automatically from existing repositories and modified in the Owl user interface (UI). Owl uses the data to generate an HTML page with standard typesetting that can be saved as a PDF file. Here we present the Owl software tool in its alpha version, its current UI, its description of input data for generating a datasheet, its example datasheets, and the vision of the tool's role in biodesign automation.

  14. Electron microscope studies

    Energy Technology Data Exchange (ETDEWEB)

    Crewe, A.V.; Kapp, O.H.

    1992-07-01

    This is a report covering the research performed in the Crewe laboratory between 1964 and 1992. Because of limitations of space we have provided relatively brief summaries of the major research directions of the facility during these years. A complete bibliography has been included and we have referenced groups of pertinent publications at the beginning of each section. This report summarizes our efforts to develop better electron microscopes and chronicles many of the experimental programs, in materials science and biology, that acted both as a stimulus to better microscope design and also as a testing ground for many instrumental innovations.

  15. Hermeticity of electronic packages

    CERN Document Server

    Greenhouse, Hal

    2000-01-01

    This is a book about the integrity of sealed packages to resist foreign gases and liquids penetrating the seal or an opening (crack) in the package-especially critical to the reliability and longevity of electronics. The author explains how to predict the reliability and the longevity of the packages based on leak rate measurements and the assumptions of impurities. Non-specialists in particular will benefit from the author's long involvement in the technology. Hermeticity is a subject that demands practical experience, and solving one problem does not necessarily give one the background to so

  16. EMC in power electronics

    CERN Document Server

    Tihanyi, Laszlo

    1995-01-01

    Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions.The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis technique

  17. Electronic Word of Behavior

    DEFF Research Database (Denmark)

    Kunst, Katrine

    that recent years have seen a social media-facilitated move from opinion-centric eWOM (e.g. reviews) to behavior-centric (e.g. information about friends’ music consumption on Spotify). A review of the concepts of WOM and eWOM and a netnographic study reveal that the current definitions and understandings...... of the concepts do not capture this new kind of consumer-to-consumer information transfer about products and services. Consequently, we suggest an extension of those concepts: Electronic Word of Behavior....

  18. Water-cooled electronics

    CERN Document Server

    Dumont, G; Righini, B

    2000-01-01

    LHC experiments demand on cooling of electronic instrumentation will be extremely high. A large number of racks will be located in underground caverns and counting rooms, where cooling by conventional climatisation would be prohibitively expensive. A series of tests on the direct water cooling of VMEbus units and of their standard power supplies is reported. A maximum dissipation of 60 W for each module and more than 1000 W delivered by the power supply to the crate have been reached. These values comply with the VMEbus specifications. (3 refs).

  19. Electronic health records

    DEFF Research Database (Denmark)

    Kierkegaard, Patrick

    2011-01-01

    The European Commission wants to boost the digital economy by enabling all Europeans to have access to online medical records anywhere in Europe by 2020. With the newly enacted Directive 2011/24/EU on patients’ rights in cross-border healthcare due for implementation by 2013, it is inevitable...... that a centralised European health record system will become a reality even before 2020. However, the concept of a centralised supranational central server raises concern about storing electronic medical records in a central location. The privacy threat posed by a supranational network is a key concern. Cross...

  20. Electron-atom scattering

    International Nuclear Information System (INIS)

    McCarthy, I.E.

    1991-07-01

    The coupled-channels-optical method has been implemented using two different approximations to the optical potential. The half-on-shell optical potential involves drastic approximations for numerical feasibility but still gives a good semiquantitative description of the effect of uncoupled channels on electron scattering from hydrogen, helium and sodium. The distorted-wave optical potential makes no approximations other than the weak coupling approximation for uncoupled channels. In applications to hydrogen and sodium it shows promise of describing scattering phenomena excellently at all energies. 27 refs., 5 figs