WorldWideScience

Sample records for leas implementing measures

  1. Measurement of the vertical infiltration parameters and water redistribution in LRd and LEa soils by gamma-ray transmission technique

    International Nuclear Information System (INIS)

    Souza, A.D.B. de; Saito, H.; Appoloni, C.R.; Coimbra, M.M.; Parreira, P.S.

    1991-01-01

    The properties of soil water diffusivity and soil hydraulic conductivity of two horizons (0-20 cm and 20-40 cm) from Latossolo Roxo distrofico (LRd) and Latossolo Vermelho escuro (LEa) soil samples, have been measured in laboratory through the vertical infiltration and redistribution of water in soil columns. The moisture profile as a function of time for each position in the soil column were obtained with the gamma-ray transmission technique, using a sup(241)Am gamma-ray source, a Na (I) T1 scintillation detector and gamma spectrometry standard electronic. (author)

  2. Developing and Implementing Effective Communications Systems: Improving SEA Communication with LEAs, Partners/Vendors, and the Public. Benchmark. No. 2

    Science.gov (United States)

    Brasiel, S.; Nafziger, D.

    2013-01-01

    State education agencies (SEAs) are central players in initiating and leading new reform efforts and in supporting and implementing Federal initiatives. Traditional approaches to providing public information are not adequate for producing public awareness and support and in supporting program implementation at the local level. With limited…

  3. Tekstiilikonverents Hispaanias / Lea Pruuli

    Index Scriptorium Estoniae

    Pruuli, Lea

    1998-01-01

    8. - 16. märtsini Barcelonas ja Madridis European Textile Networki konverentsist. Eesti tekstiilikunstnike delegatsiooni kuulusid Katrin Pere, Signe Kivi, Lylian Meister, Merike Männi, Aune Taamal, Aet Ollisaar, Anne Tootma ja Lea Pruuli. Eesti tekstiilikunstist kõnelesid Signe Kivi, Katrin Pere. K. Pere valiti ETN juhatuse vaatlejaliikmeks.

  4. 34 CFR 200.52 - LEA improvement.

    Science.gov (United States)

    2010-07-01

    ....50(d), the LEA must develop or revise an LEA improvement plan. (2) The LEA must consult with parents... through 200.20; (v) Address— (A) The fundamental teaching and learning needs in the schools of the LEA... section 1120A of the ESEA; and (viii) Include strategies to promote effective parental involvement in the...

  5. Meditsiinidoktor Lea Pehme / Alan Altraja

    Index Scriptorium Estoniae

    Altraja, Alan, 1965-

    2008-01-01

    7. sept. 2007 kaitses Tartu Ülikooli arstiteaduskonna nõukogu ees doktoriväitekirja "Tuberkuloosi epidemioloogiline olukord Eestis 1991-2003 rõhuasetusega kopsuvälisele tuberkuloosile ja kopsutuberkuloosi diagnoosimise viivitust mõjutavatele teguritele" Lea Pehme

  6. 34 CFR 200.53 - LEA corrective action.

    Science.gov (United States)

    2010-07-01

    ... operated by the LEA to a higher-performing public school operated by another LEA in accordance with § 200... Programs Operated by Local Educational Agencies Lea and School Improvement § 200.53 LEA corrective action... SEA to identify an LEA for corrective action; and (ii) Any underlying staffing, curriculum, or other...

  7. 34 CFR 200.71 - LEA eligibility.

    Science.gov (United States)

    2010-07-01

    ... least five percent of the LEA's total population ages 5 to 17 years, inclusive. (d) Education finance... 34 Education 1 2010-07-01 2010-07-01 false LEA eligibility. 200.71 Section 200.71 Education Regulations of the Offices of the Department of Education OFFICE OF ELEMENTARY AND SECONDARY EDUCATION...

  8. The continuing conundrum of the LEA proteins.

    Science.gov (United States)

    Tunnacliffe, Alan; Wise, Michael J

    2007-10-01

    Research into late embryogenesis abundant (LEA) proteins has been ongoing for more than 20 years but, although there is a strong association of LEA proteins with abiotic stress tolerance particularly dehydration and cold stress, for most of that time, their function has been entirely obscure. After their initial discovery in plant seeds, three major groups (numbered 1, 2 and 3) of LEA proteins have been described in a range of different plants and plant tissues. Homologues of groups 1 and 3 proteins have also been found in bacteria and in certain invertebrates. In this review, we present some new data, survey the biochemistry, biophysics and bioinformatics of the LEA proteins and highlight several possible functions. These include roles as antioxidants and as membrane and protein stabilisers during water stress, either by direct interaction or by acting as molecular shields. Along with other hydrophilic proteins and compatible solutes, LEA proteins might also serve as "space fillers" to prevent cellular collapse at low water activities. This multifunctional capacity of the LEA proteins is probably attributable in part to their structural plasticity, as they are largely lacking in secondary structure in the fully hydrated state, but can become more folded during water stress and/or through association with membrane surfaces. The challenge now facing researchers investigating these enigmatic proteins is to make sense of the various in vitro defined functions in the living cell: Are the LEA proteins truly multi-talented, or are they still just misunderstood?

  9. Lea blood group antigen on human platelets

    International Nuclear Information System (INIS)

    Dunstan, R.A.; Simpson, M.B.; Rosse, W.F.

    1985-01-01

    One- and two-stage radioligand assays were used to determine if human platelets possess the Lea antigen. Goat IgG anti-Lea antibody was purified by multiple adsorptions with Le(a-b-) human red blood cells, followed by affinity chromatography with synthetic Lea substance and labeling with 125 I. Human IgG anti-Lea antibody was used either in a two stage radioassay with 125 I-labeled mouse monoclonal IgG anti-human IgG as the second antibody or, alternatively, purified by Staph protein A chromatography, labeled with 125 I, and used in a one-stage radioassay. Platelets from donors of appropriate red blood cell phenotypes were incubated with the antisera, centrifuged through phthalate esters, and assayed in a gamma scintillation counter. Dose response and saturation curve analysis demonstrate the presence of Lewis a antigen on platelets from Lea+ donors. Furthermore, platelets from an Le(a-b-) donor incubated in Le (a+b-) plasma adsorb Lea antigen in a similar manner to red blood cells. The clinical significance of these antigens in platelet transfusion remains undefined

  10. INVARIANTS OF GENERALIZED RAPOPORT-LEAS EQUATIONS

    Directory of Open Access Journals (Sweden)

    Elena N. Kushner

    2018-01-01

    Full Text Available For the generalized Rapoport-Leas equations, algebra of differential invariants is constructed with respect to point transformations, that is, transformations of independent and dependent variables. The finding of a general transformation of this type reduces to solving an extremely complicated functional equation. Therefore, following the approach of Sophus Lie, we restrict ourselves to the search for infinitesimal transformations which are generated by translations along the trajectories of vector fields. The problem of finding these vector fields reduces to the redefined system decision of linear differential equations with respect to their coefficients. The Rapoport-Leas equations arise in the study of nonlinear filtration processes in porous media, as well as in other areas of natural science: for example, these equations describe various physical phenomena: two-phase filtration in a porous medium, filtration of a polytropic gas, and propagation of heat at nuclear explosion. They are vital topic for research: in recent works of Bibikov, Lychagin, and others, the analysis of the symmetries of the generalized Rapoport-Leas equations has been carried out; finite-dimensional dynamics and conditions of attractors existence have been found. Since the generalized RapoportLeas equations are nonlinear partial differential equations of the second order with two independent variables; the methods of the geometric theory of differential equations are used to study them in this paper. According to this theory differential equations generate subvarieties in the space of jets. This makes it possible to use the apparatus of modern differential geometry to study differential equations. We introduce the concept of admissible transformations, that is, replacements of variables that do not derive equations outside the class of the Rapoport-Leas equations. Such transformations form a Lie group. For this Lie group there are differential invariants that separate

  11. Identification and characterization of a LEA family gene CarLEA4 from chickpea (Cicer arietinum L.).

    Science.gov (United States)

    Gu, Hanyan; Jia, Yuying; Wang, Xiansheng; Chen, Quanjia; Shi, Shubing; Ma, Lin; Zhang, Jusong; Zhang, Hua; Ma, Hao

    2012-04-01

    Late-embryogenesis abundant (LEA) proteins have been reported to be closely correlated with the acquisition of desiccation tolerance during seed development and response of plant to drought, salinity, and freezing, etc. In this study, a LEA gene, CarLEA4 (GenBank accession no. GU247511), was isolated from chickpea based on a cDNA library constructed with chickpea seedling leaves treated by polyethylene glycol (PEG). CarLEA4 contained two exons and one intron within genomic DNA sequence and encoded a putative polypeptide of 152 amino acids. CarLEA4 had a conserved pfam domain, and showed high similarity to the group 4 LEA proteins in secondary structure. It was localized in the nucleus. The transcripts of CarLEA4 were detected in many chickpea organs including seedling leaves, stems, roots, flowers, young pods, and young seeds. CarLEA4 was inhibited by leaf age and showed expression changes in expression during seed development, pod development and germination. Furthermore, the expression of CarLEA4 was strongly induced by drought, salt, heat, cold, ABA, IAA, GA(3) and MeJA. Our results suggest that CarLEA4 encodes a protein of LEA group 4 and may be involved in various plant developmental processes and abiotic stress responses.

  12. The meaning and measurement of implementation climate

    Science.gov (United States)

    2011-01-01

    Background Climate has a long history in organizational studies, but few theoretical models integrate the complex effects of climate during innovation implementation. In 1996, a theoretical model was proposed that organizations could develop a positive climate for implementation by making use of various policies and practices that promote organizational members' means, motives, and opportunities for innovation use. The model proposes that implementation climate--or the extent to which organizational members perceive that innovation use is expected, supported, and rewarded--is positively associated with implementation effectiveness. The implementation climate construct holds significant promise for advancing scientific knowledge about the organizational determinants of innovation implementation. However, the construct has not received sufficient scholarly attention, despite numerous citations in the scientific literature. In this article, we clarify the meaning of implementation climate, discuss several measurement issues, and propose guidelines for empirical study. Discussion Implementation climate differs from constructs such as organizational climate, culture, or context in two important respects: first, it has a strategic focus (implementation), and second, it is innovation-specific. Measuring implementation climate is challenging because the construct operates at the organizational level, but requires the collection of multi-dimensional perceptual data from many expected innovation users within an organization. In order to avoid problems with construct validity, assessments of within-group agreement of implementation climate measures must be carefully considered. Implementation climate implies a high degree of within-group agreement in climate perceptions. However, researchers might find it useful to distinguish implementation climate level (the average of implementation climate perceptions) from implementation climate strength (the variability of

  13. The meaning and measurement of implementation climate

    Directory of Open Access Journals (Sweden)

    Bergmire Dawn M

    2011-07-01

    Full Text Available Abstract Background Climate has a long history in organizational studies, but few theoretical models integrate the complex effects of climate during innovation implementation. In 1996, a theoretical model was proposed that organizations could develop a positive climate for implementation by making use of various policies and practices that promote organizational members' means, motives, and opportunities for innovation use. The model proposes that implementation climate--or the extent to which organizational members perceive that innovation use is expected, supported, and rewarded--is positively associated with implementation effectiveness. The implementation climate construct holds significant promise for advancing scientific knowledge about the organizational determinants of innovation implementation. However, the construct has not received sufficient scholarly attention, despite numerous citations in the scientific literature. In this article, we clarify the meaning of implementation climate, discuss several measurement issues, and propose guidelines for empirical study. Discussion Implementation climate differs from constructs such as organizational climate, culture, or context in two important respects: first, it has a strategic focus (implementation, and second, it is innovation-specific. Measuring implementation climate is challenging because the construct operates at the organizational level, but requires the collection of multi-dimensional perceptual data from many expected innovation users within an organization. In order to avoid problems with construct validity, assessments of within-group agreement of implementation climate measures must be carefully considered. Implementation climate implies a high degree of within-group agreement in climate perceptions. However, researchers might find it useful to distinguish implementation climate level (the average of implementation climate perceptions from implementation climate strength (the

  14. A non-LEA sofic group

    Indian Academy of Sciences (India)

    ADITI KAR

    show that the class of LEA groups is not closed under taking free products with infinite cyclic amalgamations. c Indian ... Note that Yi/Z is a divisible group and so Yi = (Yi ∩ H )Z giving that [Y1 : (Y1 ∩ H)] = [Z: (Z ∩ H)] = [Y2 : (Y2 ∩ H)] = a, say. The integer a is coprime to p and H ∩ Yi = fi ◦ y(aZ[ 1 p ]). Define βi = fi(y(a p. )) ...

  15. Isolation and expression analysis of LEA genes in peanut (Arachis ...

    Indian Academy of Sciences (India)

    with 16 members, accounting for 32% of all the 50 Arabidopsis LEA genes. Aligning ... suggest that they play roles different from those of other LEA proteins. .... [Glycine max]; AAD53078, water stress-induced ER5 protein [Capsicum annuum]; ...

  16. 34 CFR 200.50 - SEA review of LEA progress.

    Science.gov (United States)

    2010-07-01

    ... LEA believes that the proposed identification is in error for statistical or other substantive reasons... circumstances, such as a natural disaster or a precipitous and unforeseen decline in the LEA's financial... corrective action for the succeeding school year. (Approved by the Office of Management and Budget under...

  17. Measuring lean implementation for maintenance service companies

    NARCIS (Netherlands)

    de Jong, Stephan J.; Beelaerts van Blokland, W.W.A.

    2016-01-01

    Purpose – Implementation of lean manufacturing is currently performed in the production industry; however, for the airline maintenance service industry, it is still in its infancy. Indicators such as work in process, cycle time, on-time performance and inventory are useful indicators to measure

  18. External Innovation Implementation Determinants and Performance Measurement

    DEFF Research Database (Denmark)

    Coates, Matthew; Bals, Lydia

    2013-01-01

    for innovation implementation based on a case study in the pharmaceutical industry. The results of 25 expert interviews and a survey with 67 respondents led to the resulting framework and a corresponding performance measurement system. The results reveal the importance of supporting systems and show differences...

  19. Implementing spatial segregation measures in R.

    Directory of Open Access Journals (Sweden)

    Seong-Yun Hong

    Full Text Available Reliable and accurate estimation of residential segregation between population groups is important for understanding the extent of social cohesion and integration in our society. Although there have been considerable methodological advances in the measurement of segregation over the last several decades, the recently developed measures have not been widely used in the literature, in part due to their complex calculation. To address this problem, we have implemented several newly proposed segregation indices in R, an open source software environment for statistical computing and graphics, as a package called seg. Although there are already a few standalone applications and add-on packages that provide access to similar methods, our implementation has a number of advantages over the existing tools. First, our implementation is flexible in the sense that it provides detailed control over the calculation process with a wide range of input parameters. Most of the parameters have carefully chosen defaults, which perform acceptably in many situations, so less experienced users can also use the implemented functions without too much difficulty. Second, there is no need to export results to other software programs for further analysis. We provide coercion methods that enable the transformation of our output classes into general R classes, so the user can use thousands of standard and modern statistical techniques, which are already available in R, for the post-processing of the results. Third, our implementation does not require commercial software to operate, so it is accessible to a wider group of people.

  20. Radiation protection measurement. Philosophy and implementation

    International Nuclear Information System (INIS)

    Recht, P.; Lakey, J.R.A.

    1975-01-01

    A selection from the proceedings of the International Symposium held by the U.K. Society for radiological protection in June 1974 was presented. The central theme was the philosophy of radiation protection measurement and its interpretation although some specific areas of good health physics practice were included. The 28 papers selected were chosen to be either representative of the central theme or of wider interest. The papers have been grouped in 6 main sections: philosophy of measurements; interpretation of measurements; implementation by legislation and monitoring; radiation exposure and control; reactor safety and siting; accidents

  1. Measures to implement the Chemical Weapons Convention

    Energy Technology Data Exchange (ETDEWEB)

    Tanzman, E.; Kellman, B.

    1999-11-05

    This seminar is another excellent opportunity for those involved in preventing chemical weapons production and use to learn from each other about how the Chemical Weapons Convention (CWC) can become a foundation of arms control in Africa and around the world. The author is grateful to the staff of the Organization for the Prohibition of Chemical Weapons (OPCW) for inviting him to address this distinguished seminar. The views expressed in this paper are those of the authors alone, and do not represent the position of the government of the US nor or of any other institution. In 1993, as the process of CWC ratification was beginning, concerns arose that the complexity of integrating the treaty with national law would cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States Parties in how the Convention would be carried out. As a result the Manual for National Implementation of the Chemical Weapons Convention was prepared and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Manual was reviewed by the Committee of Legal Experts on National Implementation of the Chemical Weapons Convention, a group of distinguished international jurists, law professors, legally-trained diplomats, government officials, and Parliamentarians from every region of the world, including Mica. In February 1998, the second edition of the Manual was published in order to update it in light of developments since the CWC entered into force on 29 April 1997. The second edition 1998 clarified the national implementation options to reflect post-entry-into-force thinking, added extensive references to national implementing measures that had been enacted by various States Parties, and included a prototype national implementing statute developed by the authors to provide a starting point for those whose national implementing

  2. Measures to implement the Chemical Weapons Convention

    International Nuclear Information System (INIS)

    Tanzman, E.; Kellman, B.

    1999-01-01

    This seminar is another excellent opportunity for those involved in preventing chemical weapons production and use to learn from each other about how the Chemical Weapons Convention (CWC) can become a foundation of arms control in Africa and around the world. The author is grateful to the staff of the Organization for the Prohibition of Chemical Weapons (OPCW) for inviting him to address this distinguished seminar. The views expressed in this paper are those of the authors alone, and do not represent the position of the government of the US nor or of any other institution. In 1993, as the process of CWC ratification was beginning, concerns arose that the complexity of integrating the treaty with national law would cause each nation to implement the Convention without regard to what other nations were doing, thereby causing inconsistencies among States Parties in how the Convention would be carried out. As a result the Manual for National Implementation of the Chemical Weapons Convention was prepared and presented it to each national delegation at the December 1993 meeting of the Preparatory Commission in The Hague. During its preparation, the Manual was reviewed by the Committee of Legal Experts on National Implementation of the Chemical Weapons Convention, a group of distinguished international jurists, law professors, legally-trained diplomats, government officials, and Parliamentarians from every region of the world, including Mica. In February 1998, the second edition of the Manual was published in order to update it in light of developments since the CWC entered into force on 29 April 1997. The second edition 1998 clarified the national implementation options to reflect post-entry-into-force thinking, added extensive references to national implementing measures that had been enacted by various States Parties, and included a prototype national implementing statute developed by the authors to provide a starting point for those whose national implementing

  3. Implementing and Characterizing Precise Multiqubit Measurements

    Directory of Open Access Journals (Sweden)

    J. Z. Blumoff

    2016-09-01

    Full Text Available There are two general requirements to harness the computational power of quantum mechanics: the ability to manipulate the evolution of an isolated system and the ability to faithfully extract information from it. Quantum error correction and simulation often make a more exacting demand: the ability to perform nondestructive measurements of specific correlations within that system. We realize such measurements by employing a protocol adapted from Nigg and Girvin [Phys. Rev. Lett. 110, 243604 (2013], enabling real-time selection of arbitrary register-wide Pauli operators. Our implementation consists of a simple circuit quantum electrodynamics module of four highly coherent 3D transmon qubits, collectively coupled to a high-Q superconducting microwave cavity. As a demonstration, we enact all seven nontrivial subset-parity measurements on our three-qubit register. For each, we fully characterize the realized measurement by analyzing the detector (observable operators via quantum detector tomography and by analyzing the quantum backaction via conditioned process tomography. No single quantity completely encapsulates the performance of a measurement, and standard figures of merit have not yet emerged. Accordingly, we consider several new fidelity measures for both the detector and the complete measurement process. We measure all of these quantities and report high fidelities, indicating that we are measuring the desired quantities precisely and that the measurements are highly nondemolition. We further show that both results are improved significantly by an additional error-heralding measurement. The analyses we present here form a useful basis for the future characterization and validation of quantum measurements, anticipating the demands of emerging quantum technologies.

  4. Missugune tuleb X Academica? / Lea Kivi, Lauri Randveer

    Index Scriptorium Estoniae

    Kivi, Lea

    2006-01-01

    Vastavad Lea Kivi ja Lauri Randveer välissuhete osakonnast 23. - 27. septembrini toimuvast Saksa-Eesti akadeemilisest nädalast teemal "Viimane aastakümme Eestis ja Saksamaal: kuhu me oleme jõudnud?"

  5. Genome-wide identification and comparative expression analysis of LEA genes in watermelon and melon genomes

    OpenAIRE

    Celik Altunoglu, Yasemin; Baloglu, Mehmet Cengiz; Baloglu, Pinar; Yer, Esra Nurten; Kara, Sibel

    2017-01-01

    Late embryogenesis abundant (LEA) proteins are large and diverse group of polypeptides which were first identified during seed dehydration and then in vegetative plant tissues during different stress responses. Now, gene family members of LEA proteins have been detected in various organisms. However, there is no report for this protein family in watermelon and melon until this study. A total of 73 LEA genes from watermelon (ClLEA) and 61 LEA genes from melon (CmLEA) were identified in this co...

  6. Design, implementation and licensing of improvement measures

    International Nuclear Information System (INIS)

    Rousset, P.

    2000-01-01

    Modifications are designed to contribute to improve the level of safety, and the level of performance of the plants. The successful implementation of a modification depends on the quality of the design and particularly the good fitting of the modification in the existing design, on the perfect consistency of the licensing approach and on the good management of the project constraints and interfaces. Over the last ten years, FRAMATOME has accumulated a large and varied experience in these activities, as shown in the few examples briefly described in the presentation. Within the Mochovce completion project, FRAMATOME has been in charge of the basic design or implementation of about twenty safety measures. This involved establishing efficient partnerships with design organizations and suppliers in the Slovak Republic, Czech Republic, and Russia. A similar approach is used in the frame of the Kozloduy 5-6 modernization program, where the basic engineering contract is conducted since 1998 and the main contract under discussion. From the very beginning of the TACIS program FRAMATOME has been involved in projects dealing with the design of reactor safety systems. For example, an extensive work aiming at developing a methodology for accident analysis in VVER reactor was initiated in 1993, in collaboration with Siemens, Kurchatov Institute and OKB Gidropress. This methodology was recently used successfully in a new project with the objective to evaluate the possible modification of reactor protection signals of some Russian reactors. Within the PHARE program, a complete analysis of the primary to secondary leakage risk was conducted for Paks nuclear power plant. This involved the writing and validation of the relevant emergency procedure, specification of the leak detection system, study of an improved design of the collector cover, and recommendation of some systems modifications. A last example is the study of the modifications of main steam lines performed in the frame

  7. Molecular cloning and characterization of a group 3 LEA gene from ...

    African Journals Online (AJOL)

    Late embryogenesis-abundant (LEA) protein is one of the components involved in desiccation tolerance (DT) by maintaining cellular structures in the dry state. In this study, a member of the group 3 LEA, MwLEA1, was cloned from Mongolian wheatgrass (Agropyron mongolium Keng) based on a homologous sequence from ...

  8. 34 CFR 200.70 - Allocation of funds to LEAs in general.

    Science.gov (United States)

    2010-07-01

    ... Improving Basic Programs Operated by Local Educational Agencies Allocations to Leas § 200.70 Allocation of funds to LEAs in general. (a) The Secretary allocates basic grants, concentration grants, targeted grants, and education finance incentive grants, through SEAs, to each eligible LEA for which the Bureau...

  9. Genome-wide identification and comparative expression analysis of LEA genes in watermelon and melon genomes.

    Science.gov (United States)

    Celik Altunoglu, Yasemin; Baloglu, Mehmet Cengiz; Baloglu, Pinar; Yer, Esra Nurten; Kara, Sibel

    2017-01-01

    Late embryogenesis abundant (LEA) proteins are large and diverse group of polypeptides which were first identified during seed dehydration and then in vegetative plant tissues during different stress responses. Now, gene family members of LEA proteins have been detected in various organisms. However, there is no report for this protein family in watermelon and melon until this study. A total of 73 LEA genes from watermelon ( ClLEA ) and 61 LEA genes from melon ( CmLEA ) were identified in this comprehensive study. They were classified into four and three distinct clusters in watermelon and melon, respectively. There was a correlation between gene structure and motif composition among each LEA groups. Segmental duplication played an important role for LEA gene expansion in watermelon. Maximum gene ontology of LEA genes was observed with poplar LEA genes. For evaluation of tissue specific expression patterns of ClLEA and CmLEA genes, publicly available RNA-seq data were analyzed. The expression analysis of selected LEA genes in root and leaf tissues of drought-stressed watermelon and melon were examined using qRT-PCR. Among them, ClLEA - 12 - 17 - 46 genes were quickly induced after drought application. Therefore, they might be considered as early response genes for water limitation conditions in watermelon. In addition, CmLEA - 42 - 43 genes were found to be up-regulated in both tissues of melon under drought stress. Our results can open up new frontiers about understanding of functions of these important family members under normal developmental stages and stress conditions by bioinformatics and transcriptomic approaches.

  10. Isolation and expression analysis of LEA genes in peanut

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... Late embryogenesis abundant (LEA) protein family is a large protein family that includes proteins accumulated at late stages of seed development or in vegetative tissues in response to drought, salinity, cold stress and exogenous application of abscisic acid. In order to isolate peanut genes, an expressed ...

  11. Quantum market games: implementing tactics via measurements

    International Nuclear Information System (INIS)

    Pakula, I; Piotrowski, E W; Sladkowski, J

    2006-01-01

    A major development in applying quantum mechanical formalism to various fields has been made during the last few years. Quantum counterparts of Game Theory, Economy, as well as diverse approaches to Quantum Information Theory have been found and currently are being explored. Using connections between Quantum Game Theory and Quantum Computations, an application of the universality of a measurement based computation in Quantum Market Theory is presented

  12. Decoding the Divergent Subcellular Location of Two Highly Similar Paralogous LEA Proteins

    Directory of Open Access Journals (Sweden)

    Marie-Hélène Avelange-Macherel

    2018-05-01

    Full Text Available Many mitochondrial proteins are synthesized as precursors in the cytosol with an N-terminal mitochondrial targeting sequence (MTS which is cleaved off upon import. Although much is known about import mechanisms and MTS structural features, the variability of MTS still hampers robust sub-cellular software predictions. Here, we took advantage of two paralogous late embryogenesis abundant proteins (LEA from Arabidopsis with different subcellular locations to investigate structural determinants of mitochondrial import and gain insight into the evolution of the LEA genes. LEA38 and LEA2 are short proteins of the LEA_3 family, which are very similar along their whole sequence, but LEA38 is targeted to mitochondria while LEA2 is cytosolic. Differences in the N-terminal protein sequences were used to generate a series of mutated LEA2 which were expressed as GFP-fusion proteins in leaf protoplasts. By combining three types of mutation (substitution, charge inversion, and segment replacement, we were able to redirect the mutated LEA2 to mitochondria. Analysis of the effect of the mutations and determination of the LEA38 MTS cleavage site highlighted important structural features within and beyond the MTS. Overall, these results provide an explanation for the likely loss of mitochondrial location after duplication of the ancestral gene.

  13. Lea Endrikson - läheksin Venemaale tagasi, kui tööle kutsuks Gazprom või Lukoil / Lea Endrikson ; interv. Aive Antsov

    Index Scriptorium Estoniae

    Endrikson, Lea, 1964-

    2007-01-01

    Ilukaupluste keti TKM Beauty juht ning endine Venemaa Stockmanni kaubamajade turundusjuht Lea Endrikson vastab juhitööd, oma karjääri ning tööpakkumisi puudutavatele küsimustele. Lisa: TKM Beauty; Lea Endrikson

  14. Implementation and rejection of industrial steam system energy efficiency measures

    International Nuclear Information System (INIS)

    Therkelsen, Peter; McKane, Aimee

    2013-01-01

    Steam systems consume approximately one third of energy applied at US industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of 5 years through the Energy Savings Assessment (ESA) program administered by the US Department of Energy (US DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well. - Highlights: ► We examine uptake/rejection of industrial steam system energy efficiency measures. ► We examine metrics that correspond to uptake/rejection of recommended measures. ► We examine barriers hindering steam system energy efficiency measure implementation. ► Uptake/rejection of steam measures is linked to potential cost metrics. ► Increased uptake of measures and uptake of more costly measures increases with time

  15. Implementation and Rejection of Industrial Steam System Energy Efficiency Measures

    Energy Technology Data Exchange (ETDEWEB)

    Therkelesen, Peter [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); McKane, Aimee [Environmental Energy Technologies Division Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

    2013-05-01

    Steam systems consume approximately one third of energy applied at U.S. industrial facilities. To reduce energy consumption, steam system energy assessments have been conducted on a wide range of industry types over the course of five years through the Energy Savings Assessment (ESA) program administered by the U.S. Department of Energy (U.S. DOE). ESA energy assessments result in energy efficiency measure recommendations that are given potential energy and energy cost savings and potential implementation cost values. Saving and cost metrics that measure the impact recommended measures will have at facilities, described as percentages of facility baseline energy and energy cost, are developed from ESA data and used in analyses. Developed savings and cost metrics are examined along with implementation and rejection rates of recommended steam system energy efficiency measures. Based on analyses, implementation of steam system energy efficiency measures is driven primarily by cost metrics: payback period and measure implementation cost as a percentage of facility baseline energy cost (implementation cost percentage). Stated reasons for rejecting recommended measures are primarily based upon economic concerns. Additionally, implementation rates of measures are not only functions of savings and cost metrics, but time as well.

  16. The Implementation Leadership Scale (ILS): development of a brief measure of unit level implementation leadership.

    Science.gov (United States)

    Aarons, Gregory A; Ehrhart, Mark G; Farahnak, Lauren R

    2014-04-14

    In healthcare and allied healthcare settings, leadership that supports effective implementation of evidenced-based practices (EBPs) is a critical concern. However, there are no empirically validated measures to assess implementation leadership. This paper describes the development, factor structure, and initial reliability and convergent and discriminant validity of a very brief measure of implementation leadership: the Implementation Leadership Scale (ILS). Participants were 459 mental health clinicians working in 93 different outpatient mental health programs in Southern California, USA. Initial item development was supported as part of a two United States National Institutes of Health (NIH) studies focused on developing implementation leadership training and implementation measure development. Clinician work group/team-level data were randomly assigned to be utilized for an exploratory factor analysis (n = 229; k = 46 teams) or for a confirmatory factor analysis (n = 230; k = 47 teams). The confirmatory factor analysis controlled for the multilevel, nested data structure. Reliability and validity analyses were then conducted with the full sample. The exploratory factor analysis resulted in a 12-item scale with four subscales representing proactive leadership, knowledgeable leadership, supportive leadership, and perseverant leadership. Confirmatory factor analysis supported an a priori higher order factor structure with subscales contributing to a single higher order implementation leadership factor. The scale demonstrated excellent internal consistency reliability as well as convergent and discriminant validity. The ILS is a brief and efficient measure of unit level leadership for EBP implementation. The availability of the ILS will allow researchers to assess strategic leadership for implementation in order to advance understanding of leadership as a predictor of organizational context for implementation. The ILS also holds promise as a tool for

  17. The implementation leadership scale (ILS): development of a brief measure of unit level implementation leadership

    Science.gov (United States)

    2014-01-01

    Background In healthcare and allied healthcare settings, leadership that supports effective implementation of evidenced-based practices (EBPs) is a critical concern. However, there are no empirically validated measures to assess implementation leadership. This paper describes the development, factor structure, and initial reliability and convergent and discriminant validity of a very brief measure of implementation leadership: the Implementation Leadership Scale (ILS). Methods Participants were 459 mental health clinicians working in 93 different outpatient mental health programs in Southern California, USA. Initial item development was supported as part of a two United States National Institutes of Health (NIH) studies focused on developing implementation leadership training and implementation measure development. Clinician work group/team-level data were randomly assigned to be utilized for an exploratory factor analysis (n = 229; k = 46 teams) or for a confirmatory factor analysis (n = 230; k = 47 teams). The confirmatory factor analysis controlled for the multilevel, nested data structure. Reliability and validity analyses were then conducted with the full sample. Results The exploratory factor analysis resulted in a 12-item scale with four subscales representing proactive leadership, knowledgeable leadership, supportive leadership, and perseverant leadership. Confirmatory factor analysis supported an a priori higher order factor structure with subscales contributing to a single higher order implementation leadership factor. The scale demonstrated excellent internal consistency reliability as well as convergent and discriminant validity. Conclusions The ILS is a brief and efficient measure of unit level leadership for EBP implementation. The availability of the ILS will allow researchers to assess strategic leadership for implementation in order to advance understanding of leadership as a predictor of organizational context for implementation

  18. Influence of Signal Stationarity on Digital Stochastic Measurement Implementation

    Directory of Open Access Journals (Sweden)

    Ivan Župunski

    2013-06-01

    Full Text Available The paper presents the influence of signal stationarity on digital stochastic measurement method implementation. The implementation method is based on stochastic voltage generators, analog adders, low resolution A/D converter, and multipliers and accumulators implemented by Field-Programmable Gate Array (FPGA. The characteristic of first implementations of digital stochastic measurement was the measurement of stationary signal harmonics over the constant measurement period. Later, digital stochastic measurement was extended and used also when it was necessary to measure timeseries of non-stationary signal over the variable measurement time. The result of measurement is the set of harmonics, which is, in the case of non-stationary signals, the input for calculating digital values of signal in time domain. A theoretical approach to determine measurement uncertainty is presented and the accuracy trends with varying signal-to-noise ratio (SNR are analyzed. Noisy brain potentials (spontaneous and nonspontaneous are selected as an example of real non-stationary signal and its digital stochastic measurement is tested by simulations and experiments. Tests were performed without noise and with adding noise with SNR values of 10dB, 0dB and - 10dB. The results of simulations and experiments are compared versus theory calculations, and comparasion confirms the theory.

  19. 34 CFR 200.72 - Procedures for adjusting allocations determined by the Secretary to account for eligible LEAs not...

    Science.gov (United States)

    2010-07-01

    ..., DEPARTMENT OF EDUCATION TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE DISADVANTAGED Improving Basic...) Determining LEA eligibility. An SEA must determine basic grant, concentration grant, targeted grant, and education finance incentive grant eligibility for each new LEA and re-determine eligibility for the LEAs on...

  20. MLU and IPSyn measuring absolute complexity / Lea Nieminen

    Index Scriptorium Estoniae

    Nieminen, Lea

    2009-01-01

    Mõõdetakse soome laste spontaanseid lauseid struktuurilise keerukuse mõõtmiseks kasutatavate vahenditega, nagu VKP (väljendite keskmine pikkus) ja produktiivse süntaksi indeks IPSyn, et kindlaks teha, milliseid aspekte kumbki mõõdik näitab

  1. Developing and Implementing an Assessment Technique to Measure Linked Concepts

    Science.gov (United States)

    Ye, Li; Oueini, Razanne; Lewis, Scott E.

    2015-01-01

    The links students make among chemistry content is considered essential for a robust, enduring understanding in multiple learning theories. This article describes the development and implementation of an assessment technique, termed a Measure of Linked Concepts, designed to inform instructors on students' understanding of linking content…

  2. The passage and initial implementation of Oregon's Measure 44

    Science.gov (United States)

    Goldman, L.; Glantz, S.

    1999-01-01

    OBJECTIVE—To prepare a history of the passage and early implementation of Ballot Measure 44, "An Act to Support the Oregon Health Plan", and tobacco control policymaking in Oregon. Measure 44 raised cigarette taxes in Oregon by US$0.30 per pack, and dedicated 10% of the revenues to tobacco control.
METHODS—Data were gathered from interviews with members of the Committee to Support the Oregon Health Plan, Measure 44's campaign committee, as well as with state and local officials, and tobacco control advocates. Additional information was obtained from public documents, internal memoranda, and news reports.
RESULTS—Although the tobacco industry outspent Measure 44's supporters 7 to 1, the initiative passed with 56% of the vote. Even before the election, tobacco control advocates were working to develop an implementation plan for the tobacco control programme. They mounted a successful lobbying campaign to see that the legislature did not divert tobacco control funds to other uses. They also stopped industry efforts to limit the scope of the programme. The one shortcoming of the tobacco control forces was not getting involved in planning the initiative early enough to influence the amount of money that was devoted to tobacco control. Although public health groups provided 37% of the money it cost to pass Measure 44, only 10% of revenues were devoted to tobacco control.
CONCLUSIONS—Proactive planning and aggressive implementation can secure passage of tobacco control initiatives and see that the associated implementing legislation follows good public health practice.


Keywords: advocacy; legislation; implementation; tobacco tax PMID:10599577

  3. Implementation of severe accident management measures - Summary and conclusions

    International Nuclear Information System (INIS)

    2002-01-01

    The objectives of the meeting were: 1) to exchange information on activities in the area of SAM implementation and on the rationale for such actions, 2) to monitor progress made, 3) to identify cases of agreement or disagreement, 4) to discuss future orientations of work, 5) to make recommendations to the CSNI. Session summaries prepared by the Chairpersons and discussed by the whole writing group are given in Annex. During the first session, 'SAM Programmes Implementation', papers from one regulator and several utilities and national research institutes were presented to outline the status of implementation of SAM programmes in countries like Switzerland, Russia, Spain, Finland, Belgium and Korea. Also, the contribution of SAM to the safety of Japanese plants (in terms of core damage frequency) was quantified in a paper. One paper gave an overview on the situation regarding SAM implementation in Europe. The second session, 'SAM Approach', provided background and bases for Severe Accident Management in countries like Sweden, Japan, Germany and Switzerland, as well as for hardware features in advanced light water reactor designs, such as the European Pressurised Reactor (EPR), regarding Severe Accident Management. The third session, 'SAM Mitigation Measures', was about hardware measures, in particular those oriented towards hydrogen mitigation where fundamentally different approaches have been taken in Scandinavian countries, France, Germany and Korea. Three papers addressed specific contributions from research to provide a broader basis for the assumptions made in certain computer codes used for the assessment of plant risk arising from beyond-design accident sequences. The fourth session, 'Implementation of SAM Measures on VVER-1000 Reactors', was about the status of work on Severe Accident Management implementation in VVER reactors of existing design and in a new plant currently under construction. The overall picture is that Severe Accident Management has been

  4. The Relationship Between Alexithymia and Emotional Awareness: A Meta-Analytic Review of the Correlation Between TAS-20 and LEAS

    Directory of Open Access Journals (Sweden)

    Daniel Maroti

    2018-04-01

    Full Text Available Background: Alexithymia and emotional awareness may be considered overlapping constructs and both have been shown to be related to psychological and emotional well-being. However, it is not clear how the constructs relate to each other empirically or if they may overlap more or less in different populations. The aim of this review was therefore to conduct a meta-analysis of correlations between the most commonly used measures of alexithymia (i.e., the self-report instrument Toronto Alexithymia Scale; TAS-20 and emotional awareness (i.e., the observer-rated instrument Level of Emotional Awareness Scale; LEAS and to explore potential moderators of their relationship.Methods: Electronic databases were searched for studies published until the end of February 2018. Study samples were coded as medical conditions, psychiatric disorders and/or healthy controls and sample mean age and gender distribution were extracted. Correlations between the TAS-20 and the LEAS were subjected to a random effect of meta-analysis and moderators were explored in subgroup analyses and meta-regressions. Publication bias was considered.Results: 21 studies reporting on 28 independent samples on correlation analysis were included, encompassing a total of 2857 subjects (57% women. The aggregated correlation between TAS-20 and LEAS was r = −0.122 (95% CI [−0.180, −0.064]; Z = −4.092; p < 0.001, indicating a significant, but weak, negative relationship between the measures. Heterogeneity was moderate, but we found no indication of significant differences between patients with medical conditions, psychiatric disorders or healthy controls, nor that mean age or percentage of female subjects moderated the relationship. The overall estimate became somewhat weaker after adjusting for possible publication bias.Conclusions: Our results indicate that TAS-20 and LEAS measure different aspects of emotional functioning. The small overlap suggests that alexithymia and emotional

  5. University building safety index measurement using risk and implementation matrix

    Science.gov (United States)

    Rahman, A.; Arumsari, F.; Maryani, A.

    2018-04-01

    Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

  6. Implementation of Moderator Circulation Test Temperature Measurement System

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Yeong Muk; Hong, Seok Boong; Kim, Min Seok; Choi, Hwa Rim [KAERI, Daejeon (Korea, Republic of); Kim, Hyung Shin [Chungnam University, Daejeon (Korea, Republic of)

    2016-05-15

    Moderator Circulation Test(MCT) facility is 1/4 scale facility designed to reproduce the important characteristics of moderator circulation in a CANDU6 calandria under a range of operating conditions. MCT is an equipment with 380 acrylic pipes instead of the heater rods and a preliminary measurement of velocity field using PIV(Particle Image Velocimetry) is performed under the iso-thermal test conditions. The Korea Atomic Energy Research Institute (KAERI) started implementation of MCT Temperature Measurement System (TMS) using multiple infrared sensors. To control multiple infrared sensors, MCT TMS is implemented using National Instruments (NI) LabVIEW programming language. The MCT TMS is implemented to measure sensor data of multiple infrared sensors using the LabVIEW. The 35 sensor pipes of MCT TMS are divided into 2 ports to meet the minimum measurement time of 0.2 seconds. The software of MCT TMS is designed using collection function and processing function. The MCT TMS has the function of monitoring the states of multiple infrared sensors. The GUI screen of MCT TMS is composed of sensor pipe categories for user.

  7. Implementation of Moderator Circulation Test Temperature Measurement System

    International Nuclear Information System (INIS)

    Lim, Yeong Muk; Hong, Seok Boong; Kim, Min Seok; Choi, Hwa Rim; Kim, Hyung Shin

    2016-01-01

    Moderator Circulation Test(MCT) facility is 1/4 scale facility designed to reproduce the important characteristics of moderator circulation in a CANDU6 calandria under a range of operating conditions. MCT is an equipment with 380 acrylic pipes instead of the heater rods and a preliminary measurement of velocity field using PIV(Particle Image Velocimetry) is performed under the iso-thermal test conditions. The Korea Atomic Energy Research Institute (KAERI) started implementation of MCT Temperature Measurement System (TMS) using multiple infrared sensors. To control multiple infrared sensors, MCT TMS is implemented using National Instruments (NI) LabVIEW programming language. The MCT TMS is implemented to measure sensor data of multiple infrared sensors using the LabVIEW. The 35 sensor pipes of MCT TMS are divided into 2 ports to meet the minimum measurement time of 0.2 seconds. The software of MCT TMS is designed using collection function and processing function. The MCT TMS has the function of monitoring the states of multiple infrared sensors. The GUI screen of MCT TMS is composed of sensor pipe categories for user

  8. Implementing unsteady friction in pressure-time measurements

    OpenAIRE

    Jonsson, Pontus; Ramdal, Jorgen; Cervantes, Michel; Nielsen, Torbjørn Kristian

    2012-01-01

    Laboratory measurements using the pressure‐time method showed a velocity or Reynolds number dependent error of the flow estimate. It was suspected that the quasi steady friction formulation of the method was the cause. This was investigated, and it was proved that implementing a model for unsteady friction into the calculations improved the result. This paper presents the process of this investigation, and proposes a new method for treatment of the friction term in the pressure‐time method.

  9. How best to measure implementation of school health curricula: a comparison of three measures.

    Science.gov (United States)

    Resnicow, K; Davis, M; Smith, M; Lazarus-Yaroch, A; Baranowski, T; Baranowski, J; Doyle, C; Wang, D T

    1998-06-01

    The impact of school health education programs is often attenuated by inadequate teacher implementation. Using data from a school-based nutrition education program delivered in a sample of fifth graders, this study examines the discriminant and predictive validity of three measures of curriculum implementation: class-room observation of fidelity, and two measures of completeness, teacher self-report questionnaire and post-implementation interview. A fourth measure, obtained during teacher observations, that assessed student and teacher interaction and student receptivity to the curriculum (labeled Rapport) was also obtained. Predictive validity was determined by examining the association of implementation measures with three study outcomes; health knowledge, asking behaviors related to fruit and vegetables, and fruit and vegetable intake, assessed by 7-day diary. Of the 37 teachers observed, 21 were observed for two sessions and 16 were observed once. Implementation measures were moderately correlated, an indication of discriminant validity. Predictive validity analyses indicated that the observed fidelity, Rapport and interview measures were significantly correlated with post-test student knowledge. The association between health knowledge and observed fidelity (based on dual observation only), Rapport and interview measures remained significant after adjustment for pre-test knowledge values. None of the implementation variables were significantly associated with student fruit and vegetable intake or asking behaviors controlling for pre-test values. These results indicate that the teacher self-report questionnaire was not a valid measure of implementation completeness in this study. Post-implementation completeness interviews and dual observations of fidelity and Rapport appear to be more valid, and largely independent methods of implementation assessment.

  10. Fidelity of implementation: development and testing of a measure

    Directory of Open Access Journals (Sweden)

    Wiitala Wyndy

    2010-12-01

    Full Text Available Abstract Background Along with the increasing prevalence of chronic illness has been an increase in interventions, such as nurse case management programs, to improve outcomes for patients with chronic illness. Evidence supports the effectiveness of such interventions in reducing patient morbidity, mortality, and resource utilization, but other studies have produced equivocal results. Often, little is known about how implementation of an intervention actually occurs in clinical practice. While studies often assume that interventions are used in clinical practice exactly as originally designed, this may not be the case. Thus, fidelity of an intervention's implementation reflects how an intervention is, or is not, used in clinical practice and is an important factor in understanding intervention effectiveness and in replicating the intervention in dissemination efforts. The purpose of this paper is to contribute to the understanding of implementation science by (a proposing a methodology for measuring fidelity of implementation (FOI and (b testing the measure by examining the association between FOI and intervention effectiveness. Methods We define and measure FOI based on organizational members' level of commitment to using the distinct components that make up an intervention as they were designed. Semistructured interviews were conducted among 18 organizational members in four medical centers, and the interviews were analyzed qualitatively to assess three dimensions of commitment to use--satisfaction, consistency, and quality--and to develop an overall rating of FOI. Mixed methods were used to explore the association between FOI and intervention effectiveness (inpatient resource utilization and mortality. Results Predictive validity of the FOI measure was supported based on the statistical significance of FOI as a predictor of intervention effectiveness. The strongest relationship between FOI and intervention effectiveness was found when an

  11. Fidelity of implementation: development and testing of a measure.

    Science.gov (United States)

    Keith, Rosalind E; Hopp, Faith P; Subramanian, Usha; Wiitala, Wyndy; Lowery, Julie C

    2010-12-30

    Along with the increasing prevalence of chronic illness has been an increase in interventions, such as nurse case management programs, to improve outcomes for patients with chronic illness. Evidence supports the effectiveness of such interventions in reducing patient morbidity, mortality, and resource utilization, but other studies have produced equivocal results. Often, little is known about how implementation of an intervention actually occurs in clinical practice. While studies often assume that interventions are used in clinical practice exactly as originally designed, this may not be the case. Thus, fidelity of an intervention's implementation reflects how an intervention is, or is not, used in clinical practice and is an important factor in understanding intervention effectiveness and in replicating the intervention in dissemination efforts. The purpose of this paper is to contribute to the understanding of implementation science by (a) proposing a methodology for measuring fidelity of implementation (FOI) and (b) testing the measure by examining the association between FOI and intervention effectiveness. We define and measure FOI based on organizational members' level of commitment to using the distinct components that make up an intervention as they were designed. Semistructured interviews were conducted among 18 organizational members in four medical centers, and the interviews were analyzed qualitatively to assess three dimensions of commitment to use--satisfaction, consistency, and quality--and to develop an overall rating of FOI. Mixed methods were used to explore the association between FOI and intervention effectiveness (inpatient resource utilization and mortality). Predictive validity of the FOI measure was supported based on the statistical significance of FOI as a predictor of intervention effectiveness. The strongest relationship between FOI and intervention effectiveness was found when an alternative measure of FOI was utilized based on

  12. Toetuse saab äpardujalt tagasi nõuda / Kairi Oja ; kommenteerinud Lea Orro

    Index Scriptorium Estoniae

    Oja, Kairi

    2011-01-01

    PRIA peadirektor Jaan Kallas, SA Archimedes struktuuriüksuste juhataja Alice Liblik, Keskkonnainvesteeringute Keskuse kommunikatsioonijuht Kristiina Pennar, SA Innove juhatuse liige Lea Orro ning Kredexi juhataja Andrus Treier eurotoetuste tagasinõudmise põhjustest

  13. Trahv? Herned klassinurgas? Või hoopis ihunuhtlus? / Pilme, Lea; Kivistik, Ly; Sirgmets, Raili; Part, Aivar

    Index Scriptorium Estoniae

    2008-01-01

    Suhtumisest koolijuhtidele trahvimisõiguse andmise ideesse vestlevad Rakvere Põhikooli direktor Lea Pilme, Uhtna Põhikooli direktor Ly Kivistik, Väike-Maarja Gümnaasiumi direktor Raili Sirgmets ja Rakvere Gümnaasiumi direktor Aivar Part

  14. TT detector description and implementation of the survey measurements

    CERN Document Server

    Salzmann, C

    2008-01-01

    The TT geometry in the software has been updated to comply with the latest technical drawings. The main difference is in the description of the beam pipe insulation, where the amount of material has increased from $7.5\\%$ to $15.4\\%$ of $X_0$. Mother volumes are added to decrease the CPU consumption and finally several scans are made to compare the material budget between the DC06 geometry and the new 2008 geometry. In addition, the survey measurements of the TT detector have been analysed. These measurements can be subdivided into surveys of the detector box, photogrammetry of the balconies and metrology of the half-modules. The offsets with the nominal geometry are implemented in the alignment condition database.

  15. Implementing planetary protection measures on the Mars Science Laboratory.

    Science.gov (United States)

    Benardini, James N; La Duc, Myron T; Beaudet, Robert A; Koukol, Robert

    2014-01-01

    The Mars Science Laboratory (MSL), comprising a cruise stage; an aeroshell; an entry, descent, and landing system; and the radioisotope thermoelectric generator-powered Curiosity rover, made history with its unprecedented sky crane landing on Mars on August 6, 2012. The mission's primary science objective has been to explore the area surrounding Gale Crater and assess its habitability for past life. Because microbial contamination could profoundly impact the integrity of the mission and compliance with international treaty was required, planetary protection measures were implemented on MSL hardware to verify that bioburden levels complied with NASA regulations. By applying the proper antimicrobial countermeasures throughout all phases of assembly, the total bacterial endospore burden of MSL at the time of launch was kept to 2.78×10⁵ spores, well within the required specification of less than 5.0×10⁵ spores. The total spore burden of the exposed surfaces of the landed MSL hardware was 5.64×10⁴, well below the allowed limit of 3.0×10⁵ spores. At the time of launch, the MSL spacecraft was burdened with an average of 22 spores/m², which included both planned landed and planned impacted hardware. Here, we report the results of a campaign to implement and verify planetary protection measures on the MSL flight system.

  16. CpLEA5, the Late Embryogenesis Abundant Protein Gene from Chimonanthus praecox, Possesses Low Temperature and Osmotic Resistances in Prokaryote and Eukaryotes

    Directory of Open Access Journals (Sweden)

    Yiling Liu

    2015-11-01

    Full Text Available Plants synthesize and accumulate a series of stress-resistance proteins to protect normal physiological activities under adverse conditions. Chimonanthus praecox which blooms in freezing weather accumulates late embryogenesis abundant proteins (LEAs in flowers, but C. praecox LEAs are little reported. Here, we report a group of five LEA genes of C. praecox (CpLEA5, KT727031. Prokaryotic-expressed CpLEA5 was employed in Escherichia coli to investigate bioactivities and membrane permeability at low-temperature. In comparison with the vacant strains, CpLEA5-containing strains survived in a 20% higher rate; and the degree of cell membrane damage in CpLEA5-containing strains was 55% of that of the vacant strains according to a conductivity test, revealing the low-temperature resistance of CpLEA5 in bacteria. CpLEA5 was also expressed in Pichia pastoris. Interestingly, besides low-temperature resistance, CpLEA5 conferred high resistance to salt and alkali in CpLEA5 overexpressing yeast. The CpLEA5 gene was transferred into Arabidopsis thaliana to also demonstrate CpLEA5 actions in plants. As expected, the transgenic lines were more resistant against low-temperature and drought while compared with the wild type. Taken together, CpLEA5-conferred resistances to several conditions in prokaryote and eukaryotes could have great value as a genetic technology to enhance osmotic stress and low-temperature tolerance.

  17. Kinematic analysis for the implementation of landslide mitigation measures

    Science.gov (United States)

    Delmonaco, Giuseppe; Margottini, Claudio; Spizzichino, Daniele

    2010-05-01

    The present work is finalised at the implementation of a landslide risk mitigation master plan of the ancient citadel of Machu Picchu. After the warning launched in March 2001, by the scientific community on potential collapse of the citadel from a near-disastrous landslide event different studies have been promoted to reconstruct landslide activity and suggest landslide risk mitigation measures for the protection and conservation of Machu Picchu cultural heritage. A site-scale analysis has been implemented following the application and integration of geomechanical classifications, ambient noise measurements and structural and kinematical analysis. The geology of the area is characterized by granitoid bodies that had been emplaced in the axial zones of the main rift system that are now exposed at the highest altitudes, together with country rocks (Precambrian and Lower Paleozoic metamorphics) originally constituting the rift ‘roots'. The bedrock of the Inca citadel of Machu Picchu is mainly composed by granite and subordinately granodiorite. This is mainly located in the lower part of the slopes. Superficially, the granite is jointed in blocks with variable dimensions, promoted by local structural setting. Single blocks vary from 10-1 to about 200 m3. Soil cover, widely outcropping in the area, is mainly composed by individual blocks and subordinately by coarse materials originated by chemical and physical weathering of minerals. Regional tectonic uplift and structural setting rule the general morphological features of the area and as a consequence, landslide type and evolution. Rock falls, rock slides, debris flows and debris slides are the main landslide typologies affecting the citadel slopes. In the last mission in May 2009, elastic and deformation rock parameters have been collected using a passive seismic innovative technique based on natural microtremor measurements and geostructural scan lines elaboration. A landslide zoning of the citadel has been

  18. Design and implementation of a virtual laboratory of radiation measurement

    International Nuclear Information System (INIS)

    Alvarez T, J. R.; Morales S, J. B.

    2009-10-01

    The work involves the implementation of a virtual laboratory, this project is conducted in the Faculty of Engineering of National Autonomous University of Mexico with the name of LANUVI. It is intended that the laboratory can be used by students who have interest in the nuclear radiation knowledge as well as in its detection and attenuation, in addition serve as and introduction to nuclear systems. In the first part of project will conduct a source that can simulate the particle radiation of Alfa, beta, neutrons and gamma rays. The project will take sources used in class laboratories and elements that are dangerous but are used in different practical applications. After taking the source analyzing the particles behaviour in different media like air, animal tissue, aluminium, lead, etc. The analysis is done in different ways in order to know with which material can stop or mitigate the different types of radiation. Finally shall be measure radioactivity with different types of detectors. At this point, has the behaviour of ionization chamber but in the future is expected to make the simulation of some other radiation detectors. The mathematical models we represent the behaviour of these cases were implemented in free software. The program will be used to implement the virtual laboratory with radiation sources, detectors and different types of shields will be Blender which is a free software that is used by many users for the embodiment of games but try to use as a tool to help visualize the different equipment that is widely used in a radioactive materials laboratory. (Author)

  19. International conventions on air pollution abatement. Implementation measures

    International Nuclear Information System (INIS)

    Adler, S.; Groza, L.

    1996-01-01

    The environmental protection, the pollution reduction, their positive direct and indirect effects, the energy efficiency increase in using fossil fuels have an important role on the environmental and energy policies, as well as on the long-term planning. The report presents, under the new legislative context, the general frame from the implementation of concrete actions to fulfill the commitments contained in different environmental conventions, in which Romania is or intends to be a part. In this context it is presented the national approach for the implementation of two conventions: the United Nations Framework Convention on Climate Change and the Long-Range Transboundary Air Pollution, this under the United Nations Economic Commission for Europe. The report presents the necessary measures to reduce the emissions of carbon, sulfur and nitrogen oxides taking into account the process of the Romanian integration in the European structure as well as the dynamic of the economic reform. Romania is aware that the necessary environmental activities (research, design, environmental investments etc.) must be financed from internal resources, the own resources of the polluting economic units, the central and local budgets. (author). 7 refs

  20. Implementation of organizational measures in radiation protection in the Netherlands

    International Nuclear Information System (INIS)

    Freerk Boersma, H.

    2004-01-01

    The Regulation Administrative and Organizational Measures in Radiation Protection is an important part of new legislation concerning radiation protection in the Netherlands. In this contribution we pay attention to the implementation of two obligations resulting from this regulation, being the creation of a radiation protection organization, and the realization of a system of internal permits. These obligations apply to holders of comprehensive licenses. Relevant aspects of the regulation will be explained in some detail. The first draft of a guideline, initiated by the Dutch Radiation Protection Society and meant to facilitate putting up a system for internal permits, is discussed. We also describe the radiation protection organization and the system of internal permits at Groningen University, and focus on the major successes and flaws of both. (Author) 7 refs

  1. Contact sponge water absorption test implemented for in situ measures

    Science.gov (United States)

    Gaggero, Laura; Scrivano, Simona

    2016-04-01

    The contact sponge method is a non-destructive in-situ methodology used to estimate a water uptake coefficient. The procedure, unlike other in-situ measurement was proven to be directly comparable to the water uptake laboratory measurements, and was registered as UNI 11432:2011. The UNI Normal procedure requires to use a sponge with known density, soaked in water, weighed, placed on the material for 1 minute (UNI 11432, 2011; Pardini & Tiano, 2004), then weighed again. Difficulties arise in operating on test samples or on materials with porosity varied for decay. While carrying on the test, fluctuations in the bearing of the environmental parameters were negligible, but not the pressure applied to the surface, that induced the release of different water amounts towards the material. For this reason we designed a metal piece of the same diameter of the plate carrying the sponge, to be screwed at the tip of a pocket penetrometer. With this instrument the sponge was kept in contact with the surface for 1 minute applying two different loads, at first pushed with 0.3 kg/cm2 in order to press the sponge, but not its holder, against the surface. Then, a load of 1.1 kg/ cm2 was applied, still avoiding deviating the load to the sponge holder. We applied both the current and our implemented method to determine the water absorption by contact sponge on 5 fresh rock types (4 limestones: Fine - and Coarse grained Pietra di Vicenza, Rosso Verona, Breccia Aurora, and the silicoclastic Macigno sandstone). The results show that 1) the current methodology imply manual skill and experience to produce a coherent set of data; the variable involved are in fact not only the imposed pressure but also the compression mechanics. 2) The control on the applied pressure allowed reproducible measurements. Moreover, 3) the use of a thicker sponge enabled to apply the method even on rougher surfaces, as the device holding the sponge is not in contact with the tested object. Finally, 4) the

  2. The Levels of Emotional Awareness Scale: a cognitive-developmental measure of emotion.

    Science.gov (United States)

    Lane, R D; Quinlan, D M; Schwartz, G E; Walker, P A; Zeitlin, S B

    1990-01-01

    The Levels of Emotional Awareness Scale (LEAS) is based on a new cognitive-developmental model of emotional experience. The scale poses evocative interpersonal situations and elicits descriptions of the emotional responses of self and others which are scored using specific structural criteria. Forty undergraduates (20 of each sex) were tested. Interrater reliability and intratest homogeneity of the LEAS were strong. The LEAS was significantly correlated with two measures of maturity: the Washington University Sentence Completion Test (SCT) of Ego Development, and the Parental Descriptions Scale-a cognitive-developmental measure of object representation. In addition, the LEAS correlated positively with openness to experience and emotional range but not with measures of specific emotions, repression or the number of words used in the LEAS responses. These findings suggest that it is the level of emotion, not the specific quality of emotion, that is tapped by the LEAS.

  3. Development and implementation of radon daughter measurement in Egypt

    International Nuclear Information System (INIS)

    Hussein, A.Z.; Mohamed, I.H.

    2005-01-01

    During the last decade, a programme was developed to study radon daughter risks and to carry out field and experimental measurements. The Egyptian Atomic Energy Authority lead the implementation of this programme in cooperation with the International Atomic Energy Agency through the coordination project EGY/9/020 and EGY/9/030. Several national authorities participated also in this study such as Nuclear Materials Corporation. This work involved the preparation and calibration of equipment, establishment of measuring techniques, survey in some cities and mines countrywide, and preparation of regulations for radiation safety of the workers who may be exposed to high levels of radon daughters. The study shows that there is no major environmental problem for the public due to exposure to radon daughter. Occupational problem may be probable in some underground mines with bad ventilation. Reported values for radon daughter levels in units of working level ranged from 0-0.26 in some buildings and ruins in the Egyptian cities and from 0-3 working level in underground phosphate and uranium mine in the Egyptian Eastern Desert

  4. LEA Detection and Tracking Method for Color-Independent Visual-MIMO

    Directory of Open Access Journals (Sweden)

    Jai-Eun Kim

    2016-07-01

    Full Text Available Communication performance in the color-independent visual-multiple input multiple output (visual-MIMO technique is deteriorated by light emitting array (LEA detection and tracking errors in the received image because the image sensor included in the camera must be used as the receiver in the visual-MIMO system. In this paper, in order to improve detection reliability, we first set up the color-space-based region of interest (ROI in which an LEA is likely to be placed, and then use the Harris corner detection method. Next, we use Kalman filtering for robust tracking by predicting the most probable location of the LEA when the relative position between the camera and the LEA varies. In the last step of our proposed method, the perspective projection is used to correct the distorted image, which can improve the symbol decision accuracy. Finally, through numerical simulation, we show the possibility of robust detection and tracking of the LEA, which results in a symbol error rate (SER performance improvement.

  5. Toward the Effective and Efficient Measurement of Implementation Fidelity

    OpenAIRE

    Schoenwald, Sonja K.; Garland, Ann F.; Chapman, Jason E.; Frazier, Stacy L.; Sheidow, Ashli J.; Southam-Gerow, Michael A.

    2011-01-01

    Implementation science in mental health is informed by other academic disciplines and industries. Conceptual and methodological territory charted in psychotherapy research is pertinent to two elements of the conceptual model of implementation posited by Aarons and colleagues (2010)—implementation fidelity and innovation feedback systems. Key characteristics of scientifically validated fidelity instruments, and of the feasibility of their use in routine care, are presented. The challenges of e...

  6. Reducing Uncertainty: Implementation of Heisenberg Principle to Measure Company Performance

    Directory of Open Access Journals (Sweden)

    Anna Svirina

    2015-08-01

    Full Text Available The paper addresses the problem of uncertainty reduction in estimation of future company performance, which is a result of wide range of enterprise's intangible assets probable efficiency. To reduce this problem, the paper suggests to use quantum economy principles, i.e. implementation of Heisenberg principle to measure efficiency and potential of intangible assets of the company. It is proposed that for intangibles it is not possible to estimate both potential and efficiency at a certain time point. To provide a proof for these thesis, the data on resources potential and efficiency from mid-Russian companies was evaluated within deterministic approach, which did not allow to evaluate probability of achieving certain resource efficiency, and quantum approach, which allowed to estimate the central point around which the probable efficiency of resources in concentrated. Visualization of these approaches was performed by means of LabView software. It was proven that for tangible assets performance estimation a deterministic approach should be used; while for intangible assets the quantum approach allows better quality of future performance prediction. On the basis of these findings we proposed the holistic approach towards estimation of company resource efficiency in order to reduce uncertainty in modeling company performance.

  7. Comparison of the Lea Symbols and HOTV charts for preschool vision screening from age 3 to 4.5 years old

    Directory of Open Access Journals (Sweden)

    Ya-Hui Zhang

    2014-12-01

    Full Text Available AIM: To evaluate the applicability and the development of the normal visual acuity from age 3 to 3.5 years using Lea Symbols and HOTV charts.METHODS: It was a survey research study. Totally, 133 preschoolers(266 eyesbetween 3 to 4.5 years old recruited from two kid-gardens in Guangzhou were tested with both the Lea Symbols chart and the HOTV chart. Outcome measures were monocular logarithm of the minimum angle of resolution(logMARvisual acuity and inter-eye acuity difference in logMAR units for each test. RESULTS: The testability rates of the two charts were high(96.24% vs 92.48%, respectively, but difference was not statistically significant(P>0.05. The difference between the two kind of monocular vision was not statistically significant(the right eye: t=0.517, P=0.606; the left eye: t=-0.618, P=0.538. There was no significant difference between different eye(Lea Symbols chart: t=0.638, P=0.525; HOTV chart: t=-0.897, P=0.372. The visual acuities of the boys were better than those of the girls, but the difference was not statistically significant(P>0.05. The results which came from visual acuities with the two charts for the corresponding age groups(3-year-old group, 3.5-year-old group, 4-year-old group, 4.5-year-old groupindicated that the visual acuities of the preschoolers were improving with increasing age, but the difference among the visual acuities with the Lea Symbols chart was not statistically significant(the right eye: F=2.662, P=0.052; the left eye: F=1.850, P=0.143. However the difference among the visual acuities with the HOTV chart was statistically significant(the right eye: F=4.518, P=0.005; the left eye: F=3.893, P=0.011.CONCLUSION: Both Lea Symbols and HOTV chars are accepted and appropriate for preschool vision screening from 3 to 4.5 years old. The monocular visual acuity of preschoolers from age 3 to 4.5 years could be assessed was similar using the two charts. There is no correlation between visual acuity and different eye

  8. Challenges to the implementation of fiscal sustainability measures

    NARCIS (Netherlands)

    Ehrenhard, Michel Léon; Muntslag, Dennis R.; Wilderom, Celeste P.M.

    2012-01-01

    Purpose: Fiscal sustainability is high on the global political agenda. Yet, implementing the needed performance-orientation throughout public-sector organizations remains problematic. Such implementation seems to run counter to deep-seated social structures. In this paper the aim is to shed light

  9. Measuring up: Implementing a dental quality measure in the electronic health record context.

    Science.gov (United States)

    Bhardwaj, Aarti; Ramoni, Rachel; Kalenderian, Elsbeth; Neumann, Ana; Hebballi, Nutan B; White, Joel M; McClellan, Lyle; Walji, Muhammad F

    2016-01-01

    Quality improvement requires using quality measures that can be implemented in a valid manner. Using guidelines set forth by the Meaningful Use portion of the Health Information Technology for Economic and Clinical Health Act, the authors assessed the feasibility and performance of an automated electronic Meaningful Use dental clinical quality measure to determine the percentage of children who received fluoride varnish. The authors defined how to implement the automated measure queries in a dental electronic health record. Within records identified through automated query, the authors manually reviewed a subsample to assess the performance of the query. The automated query results revealed that 71.0% of patients had fluoride varnish compared with the manual chart review results that indicated 77.6% of patients had fluoride varnish. The automated quality measure performance results indicated 90.5% sensitivity, 90.8% specificity, 96.9% positive predictive value, and 75.2% negative predictive value. The authors' findings support the feasibility of using automated dental quality measure queries in the context of sufficient structured data. Information noted only in free text rather than in structured data would require using natural language processing approaches to effectively query electronic health records. To participate in self-directed quality improvement, dental clinicians must embrace the accountability era. Commitment to quality will require enhanced documentation to support near-term automated calculation of quality measures. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

  10. Characterization of the late embryogenesis abundant (LEA) proteins family and their role in drought stress tolerance in upland cotton.

    Science.gov (United States)

    Magwanga, Richard Odongo; Lu, Pu; Kirungu, Joy Nyangasi; Lu, Hejun; Wang, Xingxing; Cai, Xiaoyan; Zhou, Zhongli; Zhang, Zhenmei; Salih, Haron; Wang, Kunbo; Liu, Fang

    2018-01-15

    Late embryogenesis abundant (LEA) proteins are large groups of hydrophilic proteins with major role in drought and other abiotic stresses tolerance in plants. In-depth study and characterization of LEA protein families have been carried out in other plants, but not in upland cotton. The main aim of this research work was to characterize the late embryogenesis abundant (LEA) protein families and to carry out gene expression analysis to determine their potential role in drought stress tolerance in upland cotton. Increased cotton production in the face of declining precipitation and availability of fresh water for agriculture use is the focus for breeders, cotton being the backbone of textile industries and a cash crop for many countries globally. In this work, a total of 242, 136 and 142 LEA genes were identified in G. hirsutum, G. arboreum and G. raimondii respectively. The identified genes were classified into eight groups based on their conserved domain and phylogenetic tree analysis. LEA 2 were the most abundant, this could be attributed to their hydrophobic character. Upland cotton LEA genes have fewer introns and are distributed in all chromosomes. Majority of the duplicated LEA genes were segmental. Syntenic analysis showed that greater percentages of LEA genes are conserved. Segmental gene duplication played a key role in the expansion of LEA genes. Sixty three miRNAs were found to target 89 genes, such as miR164, ghr-miR394 among others. Gene ontology analysis revealed that LEA genes are involved in desiccation and defense responses. Almost all the LEA genes in their promoters contained ABRE, MBS, W-Box and TAC-elements, functionally known to be involved in drought stress and other stress responses. Majority of the LEA genes were involved in secretory pathways. Expression profile analysis indicated that most of the LEA genes were highly expressed in drought tolerant cultivars Gossypium tomentosum as opposed to drought susceptible, G. hirsutum. The tolerant

  11. Late Embryogenesis Abundant (LEA Constitutes a Large and Diverse Family of Proteins Involved in Development and Abiotic Stress Responses in Sweet Orange (Citrus sinensis L. Osb..

    Directory of Open Access Journals (Sweden)

    Andresa Muniz Pedrosa

    Full Text Available Late Embryogenesis Abundant (LEA proteins are an ubiquitous group of polypeptides that were first described to accumulate during plant seed dehydration, at the later stages of embryogenesis. Since then they have also been recorded in vegetative plant tissues experiencing water limitation and in anhydrobiotic bacteria and invertebrates and, thereby, correlated with the acquisition of desiccation tolerance. This study provides the first comprehensive study about the LEA gene family in sweet orange (Citrus sinensis L. Osb., the most important and widely grown fruit crop around the world. A surprisingly high number (72 of genes encoding C. sinensis LEAs (CsLEAs were identified and classified into seven groups (LEA_1, LEA_2, LEA_3 and LEA_4, LEA_5, DEHYDRIN and SMP based on their predicted amino acid sequences and also on their phylogenetic relationships with the complete set of Arabidopsis thaliana LEA proteins (AtLEAs. Approximately 60% of the CsLEAs identified in this study belongs to the unusual LEA_2 group of more hydrophobic LEA proteins, while the other LEA groups contained a relatively small number of members typically hydrophilic. A correlation between gene structure and motif composition was observed within each LEA group. Investigation of their chromosomal localizations revealed that the CsLEAs were non-randomly distributed across all nine chromosomes and that 33% of all CsLEAs are segmentally or tandemly duplicated genes. Analysis of the upstream sequences required for transcription revealed the presence of various stress-responsive cis-acting regulatory elements in the promoter regions of CsLEAs, including ABRE, DRE/CRT, MYBS and LTRE. Expression analysis using both RNA-seq data and quantitative real-time RT-PCR (qPCR revealed that the CsLEA genes are widely expressed in various tissues, and that many genes containing the ABRE promoter sequence are induced by drought, salt and PEG. These results provide a useful reference for further

  12. Late Embryogenesis Abundant (LEA) Constitutes a Large and Diverse Family of Proteins Involved in Development and Abiotic Stress Responses in Sweet Orange (Citrus sinensis L. Osb.).

    Science.gov (United States)

    Pedrosa, Andresa Muniz; Martins, Cristina de Paula Santos; Gonçalves, Luana Pereira; Costa, Marcio Gilberto Cardoso

    2015-01-01

    Late Embryogenesis Abundant (LEA) proteins are an ubiquitous group of polypeptides that were first described to accumulate during plant seed dehydration, at the later stages of embryogenesis. Since then they have also been recorded in vegetative plant tissues experiencing water limitation and in anhydrobiotic bacteria and invertebrates and, thereby, correlated with the acquisition of desiccation tolerance. This study provides the first comprehensive study about the LEA gene family in sweet orange (Citrus sinensis L. Osb.), the most important and widely grown fruit crop around the world. A surprisingly high number (72) of genes encoding C. sinensis LEAs (CsLEAs) were identified and classified into seven groups (LEA_1, LEA_2, LEA_3 and LEA_4, LEA_5, DEHYDRIN and SMP) based on their predicted amino acid sequences and also on their phylogenetic relationships with the complete set of Arabidopsis thaliana LEA proteins (AtLEAs). Approximately 60% of the CsLEAs identified in this study belongs to the unusual LEA_2 group of more hydrophobic LEA proteins, while the other LEA groups contained a relatively small number of members typically hydrophilic. A correlation between gene structure and motif composition was observed within each LEA group. Investigation of their chromosomal localizations revealed that the CsLEAs were non-randomly distributed across all nine chromosomes and that 33% of all CsLEAs are segmentally or tandemly duplicated genes. Analysis of the upstream sequences required for transcription revealed the presence of various stress-responsive cis-acting regulatory elements in the promoter regions of CsLEAs, including ABRE, DRE/CRT, MYBS and LTRE. Expression analysis using both RNA-seq data and quantitative real-time RT-PCR (qPCR) revealed that the CsLEA genes are widely expressed in various tissues, and that many genes containing the ABRE promoter sequence are induced by drought, salt and PEG. These results provide a useful reference for further exploration of

  13. Framework for measuring the sustainability performance of ecodesign implementation

    DEFF Research Database (Denmark)

    Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    Companies and academic studies are consistently reporting several potential business benefits gained fromecodesign implementation, such as increased innovation potential, development of new markets and business models, reduction in environmental liability, risks and costs, improvement of organiza......Companies and academic studies are consistently reporting several potential business benefits gained fromecodesign implementation, such as increased innovation potential, development of new markets and business models, reduction in environmental liability, risks and costs, improvement......, in alignment with corporate sustainability strategy and main drivers....

  14. Assessing organizational implementation context in the education sector: confirmatory factor analysis of measures of implementation leadership, climate, and citizenship.

    Science.gov (United States)

    Lyon, Aaron R; Cook, Clayton R; Brown, Eric C; Locke, Jill; Davis, Chayna; Ehrhart, Mark; Aarons, Gregory A

    2018-01-08

    A substantial literature has established the role of the inner organizational setting on the implementation of evidence-based practices in community contexts, but very little of this research has been extended to the education sector, one of the most common settings for the delivery of mental and behavioral health services to children and adolescents. The current study examined the factor structure, psychometric properties, and interrelations of an adapted set of pragmatic organizational instruments measuring key aspects of the organizational implementation context in schools: (1) strategic implementation leadership, (2) strategic implementation climate, and (3) implementation citizenship behavior. The Implementation Leadership Scale (ILS), Implementation Climate Scale (ICS), and Implementation Citizenship Behavior Scale (ICBS) were adapted by a research team that included the original scale authors and experts in the implementation of evidence-based practices in schools. These instruments were then administered to a geographically representative sample (n = 196) of school-based mental/behavioral health consultants to assess the reliability and structural validity via a series of confirmatory factor analyses. Overall, the original factor structures for the ILS, ICS, and ICBS were confirmed in the current sample. The one exception was poor functioning of the Rewards subscale of the ICS, which was removed in the final ICS model. Correlations among the revised measures, evaluated as part of an overarching model of the organizational implementation context, indicated both unique and shared variance. The current analyses suggest strong applicability of the revised instruments to implementation of evidence-based mental and behavioral practices in the education sector. The one poorly functioning subscale (Rewards on the ICS) was attributed to typical educational policies that do not allow for individual financial incentives to personnel. Potential directions for

  15. Phenotypic Characterization of LEA Rat: A New Rat Model of Nonobese Type 2 Diabetes

    Directory of Open Access Journals (Sweden)

    Tadashi Okamura

    2013-01-01

    Full Text Available Animal models have provided important information for the genetics and pathophysiology of diabetes. Here we have established a novel, nonobese rat strain with spontaneous diabetes, Long-Evans Agouti (LEA rat derived from Long-Evans (LE strain. The incidence of diabetes in the males was 10% at 6 months of age and 86% at 14 months, while none of the females developed diabetes. The blood glucose level in LEA male rats was between 200 and 300 mg/dl at 120 min according to OGTT. The glucose intolerance in correspondence with the impairment of insulin secretion was observed in male rats, which was the main cause of diabetes in LEA rats. Histological examination revealed that the reduction of β-cell mass was caused by progressive fibrosis in pancreatic islets in age-dependent manner. The intracytoplasmic hyaline droplet accumulation and the disappearance of tubular epithelial cell layer associated with thickening of basement membrane were evident in renal proximal tubules. The body mass index and glycaemic response to exogenous insulin were comparable to those of control rats. The unique characteristics of LEA rat are a great advantage not only to analyze the progression of diabetes, but also to disclose the genes involved in type 2 diabetes mellitus.

  16. Effects of increasing use of trifluralin and glyphosate on the microbial activity of a lea soil

    International Nuclear Information System (INIS)

    Barros, Edna Santos de; Monteiro, Regina Teresa Rosim; Peixoto, Maria de Fatima da Silva Pinto; Fay, Elizabeth Francisconi

    1997-01-01

    This work considers the importance of the glyphosate and trifluralin, which are the most used herbicides by the brazilian plantations, applying approximately fifteen and nine millions of liters by crop, respectively, for the evaluation of the increasing use of these herbicides effects on the microbial activity of a lea soil which are used for beans cultivation

  17. [Lea Kõiv. Paul Johansen und das Stadtarchiv Reval/Tallinn] / Paul Kaegbein

    Index Scriptorium Estoniae

    Kaegbein, Paul

    2008-01-01

    Arvustus: Lea Kõiv. Paul Johansen und das Stadtarchiv Reval/Tallinn. - Nordosteuropa als Geschichtsregion. Helsinki : Aue-Stiftung; Lübeck : Schmict-Röhmild, 2006. Lk. 45-59. Artiklis on kasutatud seni avalikkusele vähetuntud materjale ja osaliselt käsitletud avalikke vaidlusi, kuhu olid segatud nii Paul Johansen kui järgmine linnaarhivaar Rudolf Kenkmaa

  18. 28 CFR 54.420 - Access to schools operated by LEAs.

    Science.gov (United States)

    2010-07-01

    ....420 Section 54.420 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) NONDISCRIMINATION ON THE... operated by LEAs. A recipient that is a local educational agency shall not, on the basis of sex, exclude...; or (b) Any other school or educational unit operated by such recipient, unless such recipient...

  19. Implementation of quality management and quality measurements in education

    DEFF Research Database (Denmark)

    Madsen, Ole Nørgaard; Carlsson, Ricci

    Gennemgang af program for implementering af kvalitetsledelse på en uddannelsesinstitution. I 7 faser præsenteres en fremgangsmåde baseret på den danske/europæiske model for selvevaluering som grundlag for kvalitetsbeskrivelse af virksomheden, prioritering af kvalitetsindsats, planlægning af kvali...

  20. KvLEA, a New Isolated Late Embryogenesis Abundant Protein Gene from Kosteletzkya virginica Responding to Multiabiotic Stresses

    Directory of Open Access Journals (Sweden)

    Xiaoli Tang

    2016-01-01

    Full Text Available The LEA proteins are a kind of hydrophilic proteins, playing main functions in desiccation tolerance. However, their importance as a kind of stress proteins in abiotic stress is being clarified little by little. In this study we isolated, cloned, and identified the first KvLEA gene in Kosteletzkya virginica. Bioinformatic analysis showed that the protein encoded by this gene had common properties of LEA proteins and the multiple sequences alignment and phylogenetic analysis further showed that this protein had high homology with two Arabidopsis LEA proteins. Gene expression analysis revealed that this gene had a higher expression in root and it was induced obviously by salt stress. Moreover, the transcripts of KvLEA were also induced by other abiotic stresses including drought, high temperature, chilling, and ABA treatment. Among these abiotic stresses, ABA treatment brought about the biggest changes to this gene. Collectively, our research discovered a novel LEA gene and uncovered its involvement in multiabiotic stresses in K. virginica. This research not only enriched studies on LEA gene in plant but also would accelerate more studies on K. virginica in the future.

  1. Sustained Implementation Support Scale: Validation of a Measure of Program Characteristics and Workplace Functioning for Sustained Program Implementation.

    Science.gov (United States)

    Hodge, Lauren M; Turner, Karen M T; Sanders, Matthew R; Filus, Ania

    2017-07-01

    An evaluation measure of enablers and inhibitors to sustained evidence-based program (EBP) implementation may provide a useful tool to enhance organizations' capacity. This paper outlines preliminary validation of such a measure. An expert informant and consumer feedback approach was used to tailor constructs from two existing measures assessing key domains associated with sustained implementation. Validity and reliability were evaluated for an inventory composed of five subscales: Program benefits, Program burden, Workplace support, Workplace cohesion, and Leadership style. Exploratory and confirmatory factor analysis with a sample of 593 Triple P-Positive Parenting Program-practitioners led to a 28-item scale with good reliability and good convergent, discriminant, and predictive validity. Practitioners sustaining implementation at least 3 years post-training were more likely to have supervision/peer support, reported higher levels of program benefit, workplace support, and positive leadership style, and lower program burden compared to practitioners who were non-sustainers.

  2. Implementation of emergency department transfer communication measures in Minnesota critical access hospitals.

    Science.gov (United States)

    Klingner, Jill; Moscovice, Ira; Casey, Michelle; McEllistrem Evenson, Alex

    2015-01-01

    Previously published findings based on field tests indicated that emergency department patient transfer communication measures are feasible and worthwhile to implement in rural hospitals. This study aims to expand those findings by focusing on the wide-scale implementation of these measures in the 79 Critical Access Hospitals (CAHs) in Minnesota from 2011 to 2013. Information was obtained from interviews with key informants involved in implementing the emergency department patient transfer communication measures in Minnesota as part of required statewide quality reporting. The first set of interviews targeted state-level organizations regarding their experiences working with providers. A second set of interviews targeted quality and administrative staff from CAHs regarding their experiences implementing measures. Implementing the measures in Minnesota CAHs proved to be successful in a number of respects, but informants also faced new challenges. Our recommendations, addressed to those seeking to successfully implement these measures in other states, take these challenges into account. Field-testing new quality measure implementations with volunteers may not be indicative of a full-scale implementation that requires facilities to participate. The implementation team's composition, communication efforts, prior relationships with facilities and providers, and experience with data collection and abstraction tools are critical factors in successfully implementing required reporting of quality measures on a wide scale. © 2014 National Rural Health Association.

  3. Design and Implementation of High Precision Temperature Measurement Unit

    Science.gov (United States)

    Zeng, Xianzhen; Yu, Weiyu; Zhang, Zhijian; Liu, Hancheng

    2018-03-01

    Large-scale neutrino detector requires calibration of photomultiplier tubes (PMT) and electronic system in the detector, performed by plotting the calibration source with a group of designated coordinates in the acrylic sphere. Where the calibration source positioning is based on the principle of ultrasonic ranging, the transmission speed of ultrasonic in liquid scintillator of acrylic sphere is related to temperature. This paper presents a temperature measurement unit based on STM32L031 and single-line bus digital temperature sensor TSic506. The measurement data of the temperature measurement unit can help the ultrasonic ranging to be more accurate. The test results show that the temperature measurement error is within ±0.1°C, which satisfies the requirement of calibration source positioning. Take energy-saving measures, with 3.7V/50mAH lithium battery-powered, the temperature measurement unit can work continuously more than 24 hours.

  4. France: Improvement measures implemented at the Centre de la Manche

    International Nuclear Information System (INIS)

    2005-01-01

    was constructed to divert rainwater away from the repository. Corrective actions taken before the institutional control period. ANDRA filed an application in September 1994 for authorization to begin the institutional control period. The safety authority felt that the application for authorization to begin the institutional control period should be submitted to a public inquiry. The inquiry commission gathered the opinions of the population and, in February 1996, issued a favourable opinion on the transition of the Centre de la Manche to the institutional control period. Subsequently, after complaints were filed against ANDRA by ecological associations for water pollution and violations of the regulations, the Government decided to set up a second evaluation commission in February 1996. This commission was asked to evaluate the situation concerning the Centre de la Manche disposal facility and to express its opinion on the impact of the Centre on the environment. The Government made the commission's conclusions public in July 1996. The commission concluded that if the intended measures were taken, the Centre would present no significant health risk for the local population. In June 1998, ANDRA sent the supervisory ministries a new preliminary report concerning the transition to the institutional control period, taking into account the commission's conclusions. The review of the inventory was completed, including the provision of information about missing data, and the impact of the facility was reassessed from the radiological and chemical standpoint. ANDRA then proposed phased institutional control divided into three periods. The first period would be one of highly active surveillance, to last about five years and intended in particular to assess the satisfactory operation of the present cap. The second period would be one of active surveillance, to last between 50 and 100 years. ANDRA's presence at the centre is necessary to ensure monitoring and maintenance, as

  5. Implementation of a consolidated, standardized database of environmental measurements data

    International Nuclear Information System (INIS)

    James, T.L.

    1996-10-01

    This report discusses the benefits of a consolidated and standardized database; reasons for resistance to the consolidation of data; implementing a consolidated database, including attempts at standardization, deciding what to include in the consolidated database, establishing lists of valid values, and addressing quality assurance/quality control (QA/QC) issues; and the evolution of a consolidated database, which includes developing and training a user community, resolving configuration control issues, incorporating historical data, identifying emerging standards, and developing pointers to other data. OREIS is used to illustrate these topics

  6. Implementation of an Experimental Method for Coupled Subchannel Mixing Measurement

    International Nuclear Information System (INIS)

    Silin, Nicolas; Juanico, Luis; Delmastro, Dario

    2003-01-01

    In this work the application of a thermal tracing technique to the measurement of thermal turbulent mixing between coupled subchannels is presented.The experiment was carried out on a real scale model with geometry similar to nuclear fuel element rod bundles.Thermal mixing rates were measured for water flows at different Reynolds numbers

  7. Ergonomic measures in construction work: enhancing evidence-based implementation

    NARCIS (Netherlands)

    Visser, S.

    2015-01-01

    Despite the development and availability of ergonomic measures in the construction industry, the number of construction workers reporting high physical work demands remains high. A reduction of the high physical work demands can be achieved by using ergonomic measures. However, these ergonomic

  8. Implementation schemes for unsharp measurements with trapped ions

    CSIR Research Space (South Africa)

    Choudhary, SK

    2013-01-01

    Full Text Available trapped ion. The schemes rely on introducing weak entanglement between the state of a target ion and that of an auxiliary ion, using standard ion-trap quantum logic operations, and then realizing an unsharp measurement through projective measurement...

  9. Listening to the customer: implementing a patient satisfaction measurement system.

    Science.gov (United States)

    Cohen, L; Delaney, P; Boston, P

    1994-01-01

    Patient satisfaction is an important issue in positioning ambulatory medical services. An effective patient satisfaction measurement program not only helps hospital managers improve the quality of clinical and administrative activities, but also helps the hospital remain viable in increasingly competitive markets. A method for the design and measurement of patient satisfaction with outpatient Endoscopy Lab services is described in this article. The survey focuses on the sequence of events experienced by the patient. Outcome measures of primary interest include global patient satisfaction and the likelihood of using the service again if given a choice. Analysis of patient responses shows that global satisfaction with the outpatient experience is positively associated with service return intention. Additional analysis shows that facility cleanliness, privacy and nurse attention are most strongly associated with global patient satisfaction. Results underscore the importance of various service attributes on patient satisfaction and return intention and of the need to further expand the uses of patient satisfaction measurement in the outpatient Endoscopy Lab.

  10. Measurements and controls implementation for the WEST project

    International Nuclear Information System (INIS)

    Daniel, Raju; Bhandarkar, Manisha; Moreau, P.

    2015-01-01

    This paper provides an overview of the diagnostics implemented on WEST and gives more details on the infra-red system which is one of the main systems used to analyze the heat loads and ensure the machine protection. The modification of the CODAC and communications networks is also discussed. The new functionalities and architecture of the WEST PCS are detailed; especially it ensures the orchestration of many subsystems such as diagnostics, actuators and allows handling asynchronous off-normal events during the plasma discharge. In correlation the plasma discharge is now seen as a set of elementary pieces (called segments) joints together. Development of new plasma controllers will be addressed. An overview of the first wall monitoring activity and development is provided. Finally preparing the plasma restart requires control oriented modelling and simulations devoted to the control of the plasma shape will be presented

  11. Experience measuring performance improvement in multiphase picture archiving and communications systems implementations

    OpenAIRE

    Reed, Gary; Reed, Deborah Hobe

    1999-01-01

    When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial dat...

  12. The design and implementation of the AVNG measurement system

    Energy Technology Data Exchange (ETDEWEB)

    Macarthur, Duncan W [Los Alamos National Laboratory; Thron, Jonathan [Los Alamos National Laboratory; Razinkov, Sergey [RFNC-VNIIEF; Livke, Alexander [RFNC-VNIIEF; Kondratov, Sergey [RFNC-VNIIEF

    2010-01-01

    An attribute measurement system (AMS) measures a number of unclassified attributes of potentially classified material. By displaying these unclassified results only as red or green lights, the AMS protects potentially classified information while still generating confidence in the measurement result. The AVNG that we describe is an AMS built by RFNC-VNIIEF in Sarov, Russia. The AVNG detects neutron and gamma radiation signatures and displays the three unclassified attributes of 'plutonium presence,' 'plutonium mass >2 kg,' and 'plutonium isotopic ratio ({sup 240}Pu to {sup 239}Pu) < 0.1.' In this presentation, we will describe the design of the AVNG neutron and gamma detector subsystems, as well as the design of the entire AMS incorporating these detectors. We will also describe the construction of the AVNG and the final design that was demonstrated in June 2009.

  13. Study On Safeguard Measures for Implementing Overall Planning of Land Use

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Based on minutely analysing the main problems existing in safeguard measures for implementing a new round of overall planning of land use,this paper constructs implementation security system of overall planning of land use,and puts forward the principles and basis of formulating safeguard measures for implementing overall planning of land use.Finally,this paper establishes the content system of safeguard measures:effectively strengthen social supervision;strengthen administrative management of land use planning;strengthen economic management of land use planning;reinforce the legal status of planning;establish incentive and constraint mechanism for reinforcing implementation;improve support system of planning.

  14. Implementation of post-Chernobyl first-priority safety improvement measures at the Leningrad NPP

    International Nuclear Information System (INIS)

    Eperin, A.P.

    1996-01-01

    After the severe accident at Chernobyl Unit 4 and in order to ensure RBMK-1000 safe operation, a set of measures was worked out aimed at preclusion of such an accident recurrence. Implementation of these measures is described

  15. Implementation of Energy Strategies in Communities (Annex 63) Volume 2: Development of strategic measures

    DEFF Research Database (Denmark)

    Kellenberger, Daniel; Schmid, Christian; Quitzau, Maj-Britt

    This report describes the further development of the analysed measures from Volume 1 into strategic measures. As with the term measure, a strategic measure refers to an essential measure in concept that can be used to develop individual implementation strategies on a local level for part...... or the whole life cycle of a project (from the first vision to monitoring of the implemented solution). The developed strategic measures deal with the following topics: Setting Vision and Targets Developing Renewable Energy Strategies Making Full use of Legal Frameworks Designing an Urban Competition Processes...... a summary of each strategic measure supported by nine appendices, each a detailed description of each strategic measure....

  16. Toward criteria for pragmatic measurement in implementation research and practice: a stakeholder-driven approach using concept mapping

    NARCIS (Netherlands)

    Powell, B.J.; Stanick, C.F.; Halko, H.M.; Dorsey, C.N.; Weiner, B.J.; Barwick, M.A.; Damschroder, L.J.; Wensing, M.; Wolfenden, L.; Lewis, C.C.

    2017-01-01

    BACKGROUND: Advancing implementation research and practice requires valid and reliable measures of implementation determinants, mechanisms, processes, strategies, and outcomes. However, researchers and implementation stakeholders are unlikely to use measures if they are not also pragmatic. The

  17. The prevalence of implementation of mental health measures in companies and its association with sickness absence.

    Science.gov (United States)

    Pas, L Willemijn; Boot, Cécile R L; van der Beek, Allard J; Proper, Karin I

    2016-03-01

    The main objective was to determine the prevalence of implementation of mental health measures aimed at the prevention of high workload (workload measures) and the promotion of work engagement (engagement measures) in companies and sectors. Additionally, its associations with sickness absence was explored. Cross-sectional survey. An internet-based survey among 12,894 company representatives in the Netherlands. Descriptive analyses were performed to determine the prevalence, and differences between sectors were tested using Chi-squared tests. ANOVA was performed to examine the association between companies with or without mental health measures and sickness absence rates. 32.8% and 21.7% of the companies reported to have implemented 'continuously or often' workload measures and engagement measures, respectively. The sectors 'health care and welfare' and 'education' reported to have implemented measures most often. Having implemented engagement measures was significantly associated with lower sickness absence (4.1% vs 4.5%). Overall, workload measures were more often implemented than engagement measures. Future research is recommended to determine reasons for implementation as well as causality in the association between mental health measures and sickness absence. Copyright © 2015. Published by Elsevier Ltd.

  18. Metrics for measuring net-centric data strategy implementation

    Science.gov (United States)

    Kroculick, Joseph B.

    2010-04-01

    An enterprise data strategy outlines an organization's vision and objectives for improved collection and use of data. We propose generic metrics and quantifiable measures for each of the DoD Net-Centric Data Strategy (NCDS) data goals. Data strategy metrics can be adapted to the business processes of an enterprise and the needs of stakeholders in leveraging the organization's data assets to provide for more effective decision making. Generic metrics are applied to a specific application where logistics supply and transportation data is integrated across multiple functional groups. A dashboard presents a multidimensional view of the current progress to a state where logistics data shared in a timely and seamless manner among users, applications, and systems.

  19. LEA: An Algorithm to Estimate the Level of Location Exposure in Infrastructure-Based Wireless Networks

    Directory of Open Access Journals (Sweden)

    Francisco Garcia

    2017-01-01

    Full Text Available Location privacy in wireless networks is nowadays a major concern. This is due to the fact that the mere fact of transmitting may allow a network to pinpoint a mobile node. We consider that a first step to protect a mobile node in this situation is to provide it with the means to quantify how accurately a network establishes its position. To achieve this end, we introduce the location-exposure algorithm (LEA, which runs on the mobile terminal only and whose operation consists of two steps. In the first step, LEA discovers the positions of nearby network nodes and uses this information to emulate how they estimate the position of the mobile node. In the second step, it quantifies the level of exposure by computing the distance between the position estimated in the first step and its true position. We refer to these steps as a location-exposure problem. We tested our proposal with simulations and testbed experiments. These results show the ability of LEA to reproduce the location of the mobile node, as seen by the network, and to quantify the level of exposure. This knowledge can help the mobile user decide which actions should be performed before transmitting.

  20. Enhanced water stress tolerance of transgenic maize plants over-expressing LEA Rab28 gene.

    Science.gov (United States)

    Amara, Imen; Capellades, Montserrat; Ludevid, M Dolors; Pagès, Montserrat; Goday, Adela

    2013-06-15

    Late Embryogenesis Abundant (LEA) proteins participate in plant stress responses and contribute to the acquisition of desiccation tolerance. In this report Rab28 LEA gene has been over-expressed in maize plants under a constitutive maize promoter. The expression of Rab28 transcripts led to the accumulation and stability of Rab28 protein in the transgenic plants. Native Rab28 protein is localized to nucleoli in wild type maize embryo cells; here we find by whole-mount immunocytochemistry that in root cells of Rab28 transgenic and wild-type plants the protein is also associated to nucleolar structures. Transgenic plants were tested for stress tolerance and resulted in sustained growth under polyethyleneglycol (PEG)-mediated dehydration compared to wild-type controls. Under osmotic stress transgenic seedlings showed increased leaf and root areas, higher relative water content (RWC), reduced chlorophyll loss and lower Malondialdehyde (MDA) production in relation to wild-type plants. Moreover, transgenic seeds exhibited higher germination rates than wild-type seeds under water deficit. Overall, our results highlight the presence of transgenic Rab28 protein in nucleolar structures and point to the potential of group 5 LEA Rab28 gene as candidate to enhance stress tolerance in maize plants. Copyright © 2013 Elsevier GmbH. All rights reserved.

  1. Advancing nursing leadership: a model for program implementation and measurement.

    Science.gov (United States)

    Omoike, Osei; Stratton, Karen M; Brooks, Beth A; Ohlson, Susan; Storfjell, Judy Lloyd

    2011-01-01

    Despite the abundant literature documenting the need for nurse management education and career development, only recently have professional standards been targeted for this group. Competency standards for nurse leaders repeatedly identify systems-level concepts including finance and budget, communication skills, strategic management, human resources management, change management, and computer technology skills. However, educational initiatives to meet these standards are still at the early stages and most nurse leaders continue to acquire knowledge and experience through "on-the-job" training. This article will illustrate the need for partnerships and collaboration between academia and hospitals to advance nursing leadership to the next century. In addition, a tool to measure the impact of a graduate certificate program in nursing administration on nurse leader competencies is presented. Overall, the certificate program has been successful in multiple ways; it has "graduated" almost 80 nurse leaders, improved participant competence in their role at the systems level, as well as providing an impetus for completion of a graduate degree post program.

  2. Measure Guideline. Five Steps to Implement the Public Housing Authority Energy-Efficient Unit Turnover Checklist

    Energy Technology Data Exchange (ETDEWEB)

    Liaukus, Christine [Building American Research Alliance, Kent, WA (United States)

    2015-07-09

    Five Steps to Implementing the PHA Energy Efficient Unit Turnover Package (ARIES, 2014) is a guide to prepare for the installation of energy efficient measures during a typical public housing authority unit turnover. While a PHA is cleaning, painting and readying a unit for a new resident, there is an opportunity to incorporate energy efficiency measures to further improve the unit's performance. The measures on the list are simple enough to be implemented by in-house maintenance personnel, inexpensive enough to be folded into operating expenses without needing capital budget, and fast enough to implement without substantially changing the number of days between occupancies, a critical factor for organizations where the demand for dwelling units far outweighs the supply. The following guide lays out a five step plan to implement the EE Unit Turnover Package in your PHA, from an initial Self-Assessment through to Package Implementation.

  3. Implementation Measurement for Evidence-Based Violence Prevention Programs in Communities.

    Science.gov (United States)

    Massetti, Greta M; Holland, Kristin M; Gorman-Smith, Deborah

    2016-08-01

    Increasing attention to the evaluation, dissemination, and implementation of evidence-based programs (EBPs) has led to significant advancements in the science of community-based violence prevention. One of the prevailing challenges in moving from science to community involves implementing EBPs and strategies with quality. The CDC-funded National Centers of Excellence in Youth Violence Prevention (YVPCs) partner with communities to implement a comprehensive community-based strategy to prevent violence and to evaluate that strategy for impact on community-wide rates of violence. As part of their implementation approach, YVPCs document implementation of and fidelity to the components of the comprehensive youth violence prevention strategy. We describe the strategies and methods used by the six YVPCs to assess implementation and to use implementation data to inform program improvement efforts. The information presented describes the approach and measurement strategies employed by each center and for each program implemented in the partner communities. YVPCs employ both established and innovative strategies for measurement and tracking of implementation across a broad range of programs, practices, and strategies. The work of the YVPCs highlights the need to use data to understand the relationship between implementation of EBPs and youth violence outcomes.

  4. Law Enforcement Agency Defibrillation (LEA-D): proceedings of the National Center for Early Defibrillation Police AED Issues Forum.

    Science.gov (United States)

    Mosesso, Vincent N; Newman, Mary M; Ornato, Joseph P; Paris, Paul M; Andersen, Leon; Brinsfield, Kathryn; Dunnavant, Gregory R; Frederick, Jay; Groh, William J; Johnston, Steven; Lerner, E Brooke; Murphy, George P; Myerburg, Robert J; Rosenberg, Donald G; Savino, Mitchell; Sayre, Michael R; Sciammarella, Joseph; Schoen, Valerie; Vargo, Philip; van Alem, Anouk; White, Roger D

    2002-01-01

    Why does LEA-D intervention seem to work in some systems but not others? Panelists agreed that some factors that delay rapid access to treatment, such as long travel distances in rural areas, may represent insurmountable barriers. Other factors, however, may be addressed more readily. These include: absence of a medical response culture, discomfort with the role of medical intervention, insecurity with the use of medical devices, a lack of proactive medical direction, infrequent refresher training, and dependence on EMS intervention. Panelists agreed that successful LEA-D programs possess ten key attributes (Table 6). In the end, the goal remains "early" defibrillation, not "police" defibrillation. It does not matter whether the rescuer wears a blue uniform--or any uniform, for that matter--so long as the defibrillator reaches the victim quickly. If LEA personnel routinely arrive at medical emergencies after other emergency responders or after 8 minutes have elapsed from the time of collapse, an LEA-D program will be unlikely to provide added value. Similarly, if police frequently arrive first, but the department is unwilling or unable to cultivate the attributes of successful LEA-D programs, efforts to improve survival may not be realized. In most communities, however, LEA-D programs have tremendous lifesaving potential and are well worth the investment of time and resources. Law enforcement agencies considering adoption of AED programs should review the frequency with which police arrive first at medical emergencies and LEA response intervals to determine whether AED programs might help improve survival in their communities. It is time for law enforcement agency defibrillation to become the rule, not the exception.

  5. Implementation of generalized measurements with minimal disturbance on a quantum computer

    International Nuclear Information System (INIS)

    Decker, T.; Grassl, M.

    2006-01-01

    We consider the problem of efficiently implementing a generalized measurement on a quantum computer. Using methods from representation theory, we exploit symmetries of the states we want to identify respectively symmetries of the measurement operators. In order to allow the information to be extracted sequentially, the disturbance of the quantum state due to the measurement should be minimal. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  6. Measuring Costs to Community-Based Agencies for Implementation of an Evidence-Based Practice.

    Science.gov (United States)

    Lang, Jason M; Connell, Christian M

    2017-01-01

    Healthcare reform has led to an increase in dissemination of evidence-based practices. Cost is frequently cited as a significant yet rarely studied barrier to dissemination of evidence-based practices and the associated improvements in quality of care. This study describes an approach to measuring the incremental, unreimbursed costs in staff time and direct costs to community-based clinics implementing an evidence-based practice through participating in a learning collaborative. Initial implementation costs exceeding those for providing "treatment as usual" were collected for ten clinics implementing trauma-focused cognitive behavioral therapy through participation in 10-month learning collaboratives. Incremental implementation costs of these ten community-based clinic teams averaged the equivalent of US$89,575 (US$ 2012). The most costly activities were training, supervision, preparation time, and implementation team meetings. Recommendations are made for further research on implementation costs, dissemination of evidence-based practices, and implications for researchers and policy makers.

  7. Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

    Science.gov (United States)

    Reed, G; Reed, D H

    1999-05-01

    When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

  8. Updated action plan for the implementation of measures as a consequence of the Fukushima reactor accident

    International Nuclear Information System (INIS)

    2014-01-01

    The action plan of the German government concerning the measures following the Fukushima reactor accident include the decision on the future of nuclear power in Germany, safety analyses, investigations and measures for nuclear power plants in a national frame, investigations in an international frame, planning for the implementation of CNS (Convention on nuclear safety) topics 1-3, i.e. measures to increase the robustness in German nuclear power plants, and the planning of implementation of further measures (CNS topics 4-6).

  9. Advancing implementation science through measure development and evaluation: a study protocol.

    Science.gov (United States)

    Lewis, Cara C; Weiner, Bryan J; Stanick, Cameo; Fischer, Sarah M

    2015-07-22

    Significant gaps related to measurement issues are among the most critical barriers to advancing implementation science. Three issues motivated the study aims: (a) the lack of stakeholder involvement in defining pragmatic measure qualities; (b) the dearth of measures, particularly for implementation outcomes; and (c) unknown psychometric and pragmatic strength of existing measures. Aim 1: Establish a stakeholder-driven operationalization of pragmatic measures and develop reliable, valid rating criteria for assessing the construct. Aim 2: Develop reliable, valid, and pragmatic measures of three critical implementation outcomes, acceptability, appropriateness, and feasibility. Aim 3: Identify Consolidated Framework for Implementation Research and Implementation Outcome Framework-linked measures that demonstrate both psychometric and pragmatic strength. For Aim 1, we will conduct (a) interviews with stakeholder panelists (N = 7) and complete a literature review to populate pragmatic measure construct criteria, (b) Q-sort activities (N = 20) to clarify the internal structure of the definition, (c) Delphi activities (N = 20) to achieve consensus on the dimension priorities, (d) test-retest and inter-rater reliability assessments of the emergent rating system, and (e) known-groups validity testing of the top three prioritized pragmatic criteria. For Aim 2, our systematic development process involves domain delineation, item generation, substantive validity assessment, structural validity assessment, reliability assessment, and predictive validity assessment. We will also assess discriminant validity, known-groups validity, structural invariance, sensitivity to change, and other pragmatic features. For Aim 3, we will refine our established evidence-based assessment (EBA) criteria, extract the relevant data from the literature, rate each measure using the EBA criteria, and summarize the data. The study outputs of each aim are expected to have a positive impact

  10. The Implementation of Performance Measurement System (PMS: Malaysian Facilities Management (FM Industry

    Directory of Open Access Journals (Sweden)

    Myeda N.E.

    2014-01-01

    Full Text Available Performance Measurement System (PMS is an effective performance measurement tool and technique that is being widely implemented in the global industries. Literature has suggested the significant contributions of its implementation in enhancing the strategic service delivery and performance. However, there is little study undertaken to explore the PMS implementation in Facilities Management (FM industry, particularly focusing on Malaysia. This study explores the PMS practice among FM practitioners and their knowledge in Performance Measurement (PM generally. Findings from this study also proposed the 20 contributing factors that the FM practitioners believed are the barriers in implementing PMS. This research also suggests the future research opportunities in developing a PMS framework that can be used as guidance for FM service delivery in Malaysia.

  11. Safeguard Measures for Implementation of New Round of Land Consolidation Planning

    Institute of Scientific and Technical Information of China (English)

    LI Chen; LIU Xin-feng; PENG Zhe; SI Tao

    2012-01-01

    We conduct a comprehensive analysis of the current situation of security system for implementation of China’s land consolidation planning. The prominent problems in the process of implementing safeguard measures for planning are summarized as follows: the guiding ideology for planning formulation is imperfect; the legal basis is weak, and administrative means are not sound; the economic security mechanism is not brought into full play, and the social security measures still need to be further deepened; the technical safeguard measures are short. From laws and regulations, administrative management, economic security, social supervision, technology management and other aspects, we establish the scientific security system for implementation of land consolidation planning; put forth the recommendations for guaranteeing the implementation of planning in China.

  12. The first record of the Chinese pond mussel Sinanodonta woodiana (Lea, 1834 in Montenegro

    Directory of Open Access Journals (Sweden)

    Tomović Jelena

    2013-01-01

    Full Text Available Sinanodonta woodiana (Lea, 1834, Chinese pond mussel (Bivalvia: Unionoida: Unionidae is one of the most invasive aquatic macroinvertebrate species found in Europe. We report the Chinese pond mussel for the first time in Montenegro, in August 2012, in Lake Šasko (Adriatic part of the Central Mediterranean subarea. One specimen of the Chinese pond mussel was observed in a habitat with a predominantly silt-clay substrate. The main pathway of species introduction was evaluated to be via fish stocking. [Projekat Ministarstva nauke Republike Srbije, br. III 43002 i br. ON 173025

  13. Nuclear Security Systems and Measures for Major Public Events. Implementing Guide (French Edition)

    International Nuclear Information System (INIS)

    2017-01-01

    This publication provides an overview, based on practical experience and lessons learned, for establishing nuclear security systems and measures for major public events. It covers technical and administrative nuclear security measures for developing the necessary organizational structure, developing plans, strategies and concepts of operations, and making arrangements for implementing the developed plans, strategies and concepts.

  14. Healthcare workers' challenges in the implementation of tuberculosis infection prevention and control measures in Mozambique

    NARCIS (Netherlands)

    Brouwer, Miranda; Coelho, Eliana; Mosse, Carla das Dores; Brondi, Luciana; Winterton, Laura; van Leth, Frank

    2014-01-01

    Healthcare Workers (HCWs) have a higher frequency of TB exposure than the general population and have therefore an occupational TB risk that infection prevention and control (IPC) measures aim to reduce. HCWs are crucial in the implementation of these measures. The objective of the study was to

  15. OsLEA3-2, an abiotic stress induced gene of rice plays a key role in salt and drought tolerance.

    Directory of Open Access Journals (Sweden)

    Jianli Duan

    Full Text Available Late embryogenesis abundant (LEA proteins are involved in tolerance to drought, cold and high salinity in many different organisms. In this report, a LEA protein producing full-length gene OsLEA3-2 was identified in rice (Oryza sativa using the Rapid Amplification of cDNA Ends (RACE method. OsLEA3-2 was found to be only expressed in the embryo and can be induced by abiotic stresses. The coding protein localizes to the nucleus and overexpression of OsLEA3-2 in yeast improved growth performance compared with control under salt- and osmotic-stress conditions. OsLEA3-2 was also inserted into pHB vector and overexpressed in Arabidopsis and rice. The transgenic Arabidopsis seedlings showed better growth on MS media supplemented with 150 mM mannitol or 100 mM NaCl as compared with wild type plants. The transgenic rice also showed significantly stronger growth performance than control under salinity or osmotic stress conditions and were able to recover after 20 days of drought stress. In vitro analysis showed that OsLEA3-2 was able to protect LDH from aggregation on freezing and inactivation on desiccation. These results indicated that OsLEA3-2 plays an important role in tolerance to abiotic stresses.

  16. Fock-state view of weak-value measurements and implementation with photons and atomic ensembles

    International Nuclear Information System (INIS)

    Simon, Christoph; Polzik, Eugene S.

    2011-01-01

    Weak measurements in combination with postselection can give rise to a striking amplification effect (related to a large ''weak value''). We show that this effect can be understood by viewing the initial state of the pointer as the ground state of a fictional harmonic oscillator. This perspective clarifies the relationship between the weak-value regime and other measurement techniques and inspires a proposal to implement fully quantum weak-value measurements combining photons and atomic ensembles.

  17. Implementing nonprojective measurements via linear optics: An approach based on optimal quantum-state discrimination

    International Nuclear Information System (INIS)

    Loock, Peter van; Nemoto, Kae; Munro, William J.; Raynal, Philippe; Luetkenhaus, Norbert

    2006-01-01

    We discuss the problem of implementing generalized measurements [positive operator-valued measures (POVMs)] with linear optics, either based upon a static linear array or including conditional dynamics. In our approach, a given POVM shall be identified as a solution to an optimization problem for a chosen cost function. We formulate a general principle: the implementation is only possible if a linear-optics circuit exists for which the quantum mechanical optimum (minimum) is still attainable after dephasing the corresponding quantum states. The general principle enables us, for instance, to derive a set of necessary conditions for the linear-optics implementation of the POVM that realizes the quantum mechanically optimal unambiguous discrimination of two pure nonorthogonal states. This extends our previous results on projection measurements and the exact discrimination of orthogonal states

  18. Lea protein expression during cold-induced dehydration in the Arctic collembola Megaphorura arctica

    Directory of Open Access Journals (Sweden)

    Popović Ž.D.

    2011-01-01

    Full Text Available The Arctic springtail Megaphorura arctica (Tullberg, 1876 employs a strategy known as cryoprotective dehydration to survive winter temperatures as low as -25°C. During cryoprotective dehydration, water is lost from the animal to ice in its surroundings as a result of the difference in vapour pressure between the animal’s supercooled body fluids and ice (Worland et al., 1998; Holmstrup and Somme, 1998. This mechanism ensures that as the habitat temperature falls, the concentration of solutes remains high enough to prevent freezing (Holmstrup et al., 2002. In M. arctica, accumulation of trehalose, a cryo/anhydro protectant, occurs in parallel with dehydration. Recent studies have identified a number of genes and cellular processes involved in cryoprotective dehydration in M. arctica (Clark et al., 2007; Clark et al., 2009; Purać et al., 2011. One of them includes late embryogenesis abundant (LEA proteins. This study, together with that of Bahrndorff et al. (2008, suggests that LEA proteins may be involved in protective dehydration in this species.

  19. Hypergol Maintenance Facility Hazardous Waste South Staging Areas, SWMU 070 Corrective Measures Implementation

    Science.gov (United States)

    Miller, Ralinda R.

    2016-01-01

    This document presents the Corrective Measures Implementation (CMI) Year 10 Annual Report for implementation of corrective measures at the Hypergol Maintenance Facility (HMF) Hazardous Waste South Staging Areas at Kennedy Space Center, Florida. The work is being performed by Tetra Tech, Inc., for the National Aeronautics and Space Administration (NASA) under Indefinite Delivery Indefinite Quantity (IDIQ) NNK12CA15B, Task Order (TO) 07. Mr. Harry Plaza, P.E., of NASA's Environmental Assurance Branch is the Remediation Project Manager for John F. Kennedy Space Center. The Tetra Tech Program Manager is Mr. Mark Speranza, P.E., and the Tetra Tech Project Manager is Robert Simcik, P.E.

  20. Kozloduy NPP units 5 and 6 modernization program. Measures implementation in outages

    International Nuclear Information System (INIS)

    Naydenov, N.; Mignone, O.

    2004-01-01

    The units 5 and 6 modernization program is a highly demanding program composed by many plant modifications and studies about plant conditions. The program measures implementation during the units outages represents a challenge by the need to compromise shut down duration with the workload related to measures installation. The units shutdown duration should be kept to the planned duration. In parallel, contractors work has to be organized, planned and performed to allow successful measures completion. In accordance with the contract requirements, contractors prepare installation documents which comprise all activities to be performed during the installation and testing of the measures. The subcontractors complement these installation documents with the project organization and execution documents, which include the manpower skills, qualifications, work orders, and other important installation instructions and information. Contractors prepared detailed installation schedules, and these were integrated by Parsons E and C in the Integrated installation schedule. The integrated schedule proved to be useful to identify possible area usage conflicts and manpower overlapping, with appropriate results for electrical, instrumentation and control work, and for the utilization of the polar crane in the containment building. Contractors installation schedules were updated on a weekly basis, showing variances versus the target, and manpower histograms for the resource loading. Organization of contractors work was supported by KNPP plant outage meetings, in which status and problems were addressed, and solution and/or corrective actions defined for further implementation. KNPP meetings were planned on a daily basis for most relevant or critical measures, or on a weekly basis for less intensive measures. KNPP meetings proved to be an excellent communication tool for keeping the measures under control and monitoring KNPP defined personnel responsible for authorizing changes, in

  1. Evaluation on the implementation of respiratory protection measures in old age homes

    Directory of Open Access Journals (Sweden)

    Lee DT

    2017-09-01

    Full Text Available Diana TF Lee,1 Doris Yu,1 Margaret Ip,2 Jennifer YM Tang3 1The Nethersole School of Nursing, The Chinese University of Hong Kong, 2Department of Microbiology, The Chinese University of Hong Kong, Prince of Wales Hospital, Sha Tin, 3Sau Po Centre on Ageing, The University of Hong Kong, Pok Fu Lam, Hong Kong Purpose: Old age homes (OAHs represent a vulnerable community for influenza outbreaks. Effective implementation of respiratory protection measures has been identified as an effective prevention measure to reduce mortality and morbidity caused by such outbreaks. Yet, relatively little is known about this aspect in these homes. This study evaluated the implementation of respiratory protection measures among infection control officers (ICOs and health care workers (HCWs in these homes in Hong Kong.Patients and methods: A territory-wide, cross-sectional survey was conducted in 87 OAHs. A total of 87 ICOs and 1,763 HCWs (including nurses, health workers, care workers, allied HCWs and assistants completed the questionnaires that evaluated the implementation at the organizational level and individual level, respectively. Generalized estimating equations with unstructured working correlation matrix were used to analyze the simultaneous influence of organizational and individual factors on the implementation.Results: At the organizational level, all homes had a policy on respiratory protection and implementation of such measures was generally adequate. Basic resources such as paper towels/hand dryers and equipment disinfectants, however, were rated as most inadequate by HCWs. Training opportunities were also identified as grossly inadequate. Only less than half of the ICOs and HCWs participated in training on infection control either at the initiation of employment or on a regular basis. Twenty-five percent of HCWs even indicated that they had never participated in any infection control training. At the individual level, hand hygiene, among other

  2. Dose measurement aboard biosatellite BION-M no. 1 (AutoCAD implementation into MCNPX)

    Energy Technology Data Exchange (ETDEWEB)

    Dolloso, P.; Miller, A.; Machrafi, R. [University of Ontario Institute of Technology, Faculty of Energy Systems and Nuclear Science, Oshawa, ON (Canada); Shurshakov, V.; Khulapko, S.; Ivanova, O. [Institute of Biomedical Problems, Moscow (Russian Federation)

    2015-07-01

    This work outlines the first AutoCAD implementation of the BION-M no. 1 space craft in MCNPX using a simplified model. The MCNPX data obtained from the simulation can be compared with measurements taken from different radiation detectors immediately after the vehicle landing. (author)

  3. 75 FR 28673 - Bureau of Verification, Compliance, and Implementation; Termination of Measures Against a Russian...

    Science.gov (United States)

    2010-05-21

    ... Implementation, Department of State, Telephone (202) 647-1192. For U.S. Government procurement ban issues: Kimberly Triplett, Office of the Procurement Executive, Department of State, Telephone: (703) 875-4079...; Termination of Measures Against a Russian Entity AGENCY: Department of State. ACTION: Notice. SUMMARY: A...

  4. Measuring Collaboration and Communication to Increase Implementation of Evidence-Based Practices: The Cultural Exchange Inventory

    Science.gov (United States)

    Palinkas, Lawrence A.; Garcia, Antonio; Aarons, Gregory; Finno-Velasquez, Megan; Fuentes, Dahlia; Holloway, Ian; Chamberlain, Patricia

    2018-01-01

    The Cultural Exchange Inventory (CEI) is a 15-item instrument designed to measure the process (7 items) and outcomes (8 items) of exchanges of knowledge, attitudes and practices between members of different organisations collaborating in implementing evidence-based practice. We conducted principal axis factor analyses and parallel analyses of data…

  5. Farmers' intentions to implement foot and mouth disease control measures in Ethiopia

    NARCIS (Netherlands)

    Jemberu, Wudu T.; Mourits, M. C M; Hogeveen, H.

    2015-01-01

    The objectives of this study were to explore farmers' intentions to implement foot and mouth disease (FMD) control in Ethiopia, and to identify perceptions about the disease and its control measures that influence these intentions using the Health Belief Model (HBM) framework. Data were collected

  6. 78 FR 37741 - Approval and Promulgation of Implementation Plans; California; South Coast; Contingency Measures...

    Science.gov (United States)

    2013-06-24

    ... deliver: Marty Robin, Office of Air Planning (AIR- 2), U.S. Environmental Protection Agency Region 9, 75... INFORMATION CONTACT: Doris Lo, Air Planning Office (AIR-2), U.S. Environmental Protection Agency, Region 9... statute precludes a State from implementing such measures before they are triggered. See, e.g., LEAN v...

  7. Dose measurement aboard biosatellite BION-M no. 1 (AutoCAD implementation into MCNPX)

    International Nuclear Information System (INIS)

    Dolloso, P.; Miller, A.; Machrafi, R.; Shurshakov, V.; Khulapko, S.; Ivanova, O.

    2015-01-01

    This work outlines the first AutoCAD implementation of the BION-M no. 1 space craft in MCNPX using a simplified model. The MCNPX data obtained from the simulation can be compared with measurements taken from different radiation detectors immediately after the vehicle landing. (author)

  8. Critical report of current fisheries management measures implemented for the North Sea mixed demersal fisheries

    DEFF Research Database (Denmark)

    Nielsen, J. Rasmus; Ulrich, Clara; Hegland, Troels J.

    The present report is an EU-FP7-SOCIOEC Report giving an overview and critical evaluation of the current management measures implemented for the North Sea mixed demersal fisheries and the fish stocks involved in this. Also, this involves review and critical evaluation of the scientific advice...

  9. Implementation and effectiveness of sound mitigation measures on Texas highways (HB 790) : final report.

    Science.gov (United States)

    2016-10-01

    The 84th Texas Legislature passed House Bill (HB) 790 directing the Texas A&M Transportation Institute (TTI) to perform a study on the implementation and effectiveness of sound mitigation measures on the state highway system and certain toll roads an...

  10. Implementation of a lock-in amplifier for optical spectroscopy measurement

    International Nuclear Information System (INIS)

    Homs, R.; Puron, E.

    2012-01-01

    The experimental set-up of an optical spectroscopy measurement based on virtual instrumentation is presented. A lock-in amplifier has been implemented by applying digital signal processing techniques to a PC-based data acquisition board. The application was developed in C++, on top of open source Qt/Qwt graphical framework. The emission spectral of reference light sources were measured in order to calibrate and validate the system. (Author)

  11. Farmers' Intentions to Implement Foot and Mouth Disease Control Measures in Ethiopia.

    Science.gov (United States)

    Jemberu, Wudu T; Mourits, M C M; Hogeveen, H

    2015-01-01

    The objectives of this study were to explore farmers' intentions to implement foot and mouth disease (FMD) control in Ethiopia, and to identify perceptions about the disease and its control measures that influence these intentions using the Health Belief Model (HBM) framework. Data were collected using questionnaires from 293 farmers in three different production systems. The influence of perceptions on the intentions to implement control measures were analyzed using binary logistic regression. The effect of socio-demographic and husbandry variables on perceptions that were found to significantly influence the intentions were analyzed using ordinal logistic regression. Almost all farmers (99%) intended to implement FMD vaccination free of charge. The majority of farmers in the pastoral (94%) and market oriented (92%) systems also had the intention to implement vaccination with charge but only 42% of the crop-livestock mixed farmers had the intention to do so. Only 2% of pastoral and 18% of crop-livestock mixed farmers had the intention to implement herd isolation and animal movement restriction continuously. These proportions increased to 11% for pastoral and 50% for crop-livestock mixed farmers when the measure is applied only during an outbreak. The majority of farmers in the market oriented system (>80%) had the intention to implement herd isolation and animal movement restriction measure, both continuously and during an outbreak. Among the HBM perception constructs, perceived barrier was found to be the only significant predictor of the intention to implement vaccination. Perceived susceptibility, perceived benefit and perceived barrier were the significant predictors of the intention for herd isolation and animal movement restriction measure. In turn, the predicting perceived barrier on vaccination control varied significantly with the production system and the age of farmers. The significant HBM perception predictors on herd isolation and animal movement

  12. Farmers’ Intentions to Implement Foot and Mouth Disease Control Measures in Ethiopia

    Science.gov (United States)

    Jemberu, Wudu T.; Mourits, M. C. M.; Hogeveen, H.

    2015-01-01

    The objectives of this study were to explore farmers’ intentions to implement foot and mouth disease (FMD) control in Ethiopia, and to identify perceptions about the disease and its control measures that influence these intentions using the Health Belief Model (HBM) framework. Data were collected using questionnaires from 293 farmers in three different production systems. The influence of perceptions on the intentions to implement control measures were analyzed using binary logistic regression. The effect of socio-demographic and husbandry variables on perceptions that were found to significantly influence the intentions were analyzed using ordinal logistic regression. Almost all farmers (99%) intended to implement FMD vaccination free of charge. The majority of farmers in the pastoral (94%) and market oriented (92%) systems also had the intention to implement vaccination with charge but only 42% of the crop-livestock mixed farmers had the intention to do so. Only 2% of pastoral and 18% of crop-livestock mixed farmers had the intention to implement herd isolation and animal movement restriction continuously. These proportions increased to 11% for pastoral and 50% for crop-livestock mixed farmers when the measure is applied only during an outbreak. The majority of farmers in the market oriented system (>80%) had the intention to implement herd isolation and animal movement restriction measure, both continuously and during an outbreak. Among the HBM perception constructs, perceived barrier was found to be the only significant predictor of the intention to implement vaccination. Perceived susceptibility, perceived benefit and perceived barrier were the significant predictors of the intention for herd isolation and animal movement restriction measure. In turn, the predicting perceived barrier on vaccination control varied significantly with the production system and the age of farmers. The significant HBM perception predictors on herd isolation and animal movement

  13. 75 FR 20390 - La-Z-Boy Casegoods, Inc.-LEA Also Known as American Drew Wilkesboro, NC; Amended Certification...

    Science.gov (United States)

    2010-04-19

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,319] La-Z-Boy Casegoods, Inc... Worker Adjustment Assistance on March 19th, 2010 applicable to workers of La-Z-Boy Casegoods, Inc.- LEA... assistance was issued for all workers of La-Z-Boy Greensboro, Inc., North Wilkesboro, North Carolina...

  14. Feng shui väärtus on vaimujõus / Marika Tomberg ; komment. Lea Eermann, komment. Rein Weber

    Index Scriptorium Estoniae

    Tomberg, Marika

    1999-01-01

    Feng shui järgi korraldatud Lea Eermanni kodust Nõmmel. Feng shui- ja geobioloogia-alase nõustamisega tegelev arhitekt Rein Weber keskkonna mõjust tervisele, magamistoast. Enda ja maja kaitsmisest halbade mõjude eest. 10 illustratsiooni

  15. 77 FR 71814 - Oil, Gas, and Potash Leasing and Development Within the Designated Potash Area of Eddy and Lea...

    Science.gov (United States)

    2012-12-04

    ... Potash Leasing and Development Within the Designated Potash Area of Eddy and Lea Counties, NM AGENCY... and supersedes the Order of the Secretary of the Interior, dated October 28, 1986 (51 FR 39425), and...-development of oil and gas and potash deposits owned by the United States within the Designated Potash Area...

  16. 76 FR 71417 - Privacy Act of 1974, as Amended; Computer Matching Program (SSA/Law Enforcement Agencies (LEA...

    Science.gov (United States)

    2011-11-17

    ...; Computer Matching Program (SSA/ Law Enforcement Agencies (LEA)) Match Number 5001 AGENCY: Social Security... protections for such persons. The Privacy Act, as amended, regulates the use of computer matching by Federal... accordance with the Privacy Act of 1974, as amended by the Computer Matching and Privacy Protection Act of...

  17. Healthcare workers' challenges in the implementation of tuberculosis infection prevention and control measures in Mozambique.

    Science.gov (United States)

    Brouwer, Miranda; Coelho, Eliana; Mosse, Carla das Dores; Brondi, Luciana; Winterton, Laura; van Leth, Frank

    2014-01-01

    Healthcare Workers (HCWs) have a higher frequency of TB exposure than the general population and have therefore an occupational TB risk that infection prevention and control (IPC) measures aim to reduce. HCWs are crucial in the implementation of these measures. The objective of the study was to investigate Mozambican HCWs' perceptions of their occupational TB risk and the measures they report using to reduce this risk. In addition, we explored the challenges HCWs encounter while using these TBIPC measures. Focus group discussion. Analysis according content method. Four categories of HCWs: auxiliary workers, medical (doctors and clinical officers), nurses and TB program staff. HCWs are aware of their occupational TB risk and use various measures to reduce their risk of infection. HCWs find it challenging to employ measures that minimize such risks and a lack of clear guidelines contributes to these challenges. HCWs' and patient behavior further complicate the use of TBIPC measures. HCWs in Mozambique perceive a high occupational risk of TB infection. They report several challenges using measures to reduce this risk such as shortage of material, lack of clear guidelines, insufficient motivation and inadequate training. Robust training with motivational approaches, alongside supervision and support for HCWs could improve implementation of TBIPC measures. Healthcare management should address the areas for improvement that are beyond the individual HCW's control.

  18. Isolation and characterization of an atypical LEA protein coding cDNA and its promoter from drought-tolerant plant Prosopis juliflora.

    Science.gov (United States)

    George, Suja; Usha, B; Parida, Ajay

    2009-05-01

    Plant growth and productivity are adversely affected by various abiotic and biotic stress factors. Despite the wealth of information on abiotic stress and stress tolerance in plants, many aspects still remain unclear. Prosopis juliflora is a hardy plant reported to be tolerant to drought, salinity, extremes of soil pH, and heavy metal stress. In this paper, we report the isolation and characterization of the complementary DNA clone for an atypical late embryogenesis abundant (LEA) protein (Pj LEA3) and its putative promoter sequence from P. juliflora. Unlike typical LEA proteins, rich in glycine, Pj LEA3 has alanine as the most abundant amino acid followed by serine and shows an average negative hydropathy. Pj LEA3 is significantly different from other LEA proteins in the NCBI database and shows high similarity to indole-3 acetic-acid-induced protein ARG2 from Vigna radiata. Northern analysis for Pj LEA3 in P. juliflora leaves under 90 mM H2O2 stress revealed up-regulation of transcript at 24 and 48 h. A 1.5-kb fragment upstream the 5' UTR of this gene (putative promoter) was isolated and analyzed in silico. The possible reasons for changes in gene expression during stress in relation to the host plant's stress tolerance mechanisms are discussed.

  19. Facilitators and Barriers of Implementing a Measurement Feedback System in Public Youth Mental Health.

    Science.gov (United States)

    Kotte, Amelia; Hill, Kaitlin A; Mah, Albert C; Korathu-Larson, Priya A; Au, Janelle R; Izmirian, Sonia; Keir, Scott S; Nakamura, Brad J; Higa-McMillan, Charmaine K

    2016-11-01

    This study examines implementation facilitators and barriers of a statewide roll-out of a measurement feedback system (MFS) in a youth public mental health system. 76 % of all state care coordinators (N = 47) completed interviews, which were coded via content analysis until saturation. Facilitators (e.g., recognition of the MFS's clinical utility) and barriers (e.g., MFS's reliability and validity) emerged paralleling the Exploration, Adoption/Preparation, Implementation, and Sustainment framework outlined by Aarons et al. (Adm Policy Mental Health Mental Health Serv Res, 38:4-23, 2011). Sustainment efforts may leverage innovation fit, individual adopter, and system related facilitators.

  20. Implementation of energy efficiency measures by municipal utilities; Umsetzung von Energieeffizienzmassnahmen durch Stadtwerke

    Energy Technology Data Exchange (ETDEWEB)

    Horst, Juri; Droeschel, Barbara [Institut fuer ZukunftsEnergieSysteme (IZES), Saarbruecken (Germany)

    2012-04-15

    Local players have a very special role to fill in the implementation of the German federal government's ambitious energy efficiency goals. In the past the contributions made by municipal utilities in the way of special offers or measures to develop efficiency potentials were only modest. Moreover there were specific impediments that discouraged a significant competition-driven efficiency services market from developing. However, there are other instruments available that could encourage municipal utilities to implement efficiency goals. A recent research project has shown how standardised efficiency programmes can be used to tap into existing efficiency potentials at a sufficient level of intensity and with macroeconomic benefit.

  1. Systems Antecedents for Dissemination and Implementation: A Review and Analysis of Measures

    Science.gov (United States)

    Emmons, Karen M.; Weiner, Bryan; Fernandez, Maria; Tu, Shin-Ping

    2011-01-01

    There is a growing emphasis on the role of organizations as settings for dissemination and implementation. Only recently has the field begun to consider features of organizations that impact on dissemination and implementation of evidence-based interventions. This manuscript identifies and evaluates available measures for 5 key organizational-level constructs: (1) leadership; (2) vision; (3) managerial relations; (4) climate; and (5) absorptive capacity. Overall the picture was the same across the five constructs—no measure was used in more than one study, many studies did not report the psychometric properties of the measures, some assessments were based on a single response per unit, and the level of the instrument and analysis did not always match. We must seriously consider the development and evaluation of a robust set of measures that will serve as the basis of building the field, allow for comparisons across organizational types and intervention topics, and allow a robust area of dissemination and implementation research to develop. PMID:21724933

  2. Effects of performance measure implementation on clinical manager and provider motivation.

    Science.gov (United States)

    Damschroder, Laura J; Robinson, Claire H; Francis, Joseph; Bentley, Douglas R; Krein, Sarah L; Rosland, Ann-Marie; Hofer, Timothy P; Kerr, Eve A

    2014-12-01

    Clinical performance measurement has been a key element of efforts to transform the Veterans Health Administration (VHA). However, there are a number of signs that current performance measurement systems used within and outside the VHA may be reaching the point of maximum benefit to care and in some settings, may be resulting in negative consequences to care, including overtreatment and diminished attention to patient needs and preferences. Our research group has been involved in a long-standing partnership with the office responsible for clinical performance measurement in the VHA to understand and develop potential strategies to mitigate the unintended consequences of measurement. Our aim was to understand how the implementation of diabetes performance measures (PMs) influences management actions and day-to-day clinical practice. This is a mixed methods study design based on quantitative administrative data to select study facilities and quantitative data from semi-structured interviews. Sixty-two network-level and facility-level executives, managers, front-line providers and staff participated in the study. Qualitative content analyses were guided by a team-based consensus approach using verbatim interview transcripts. A published interpretive motivation theory framework is used to describe potential contributions of local implementation strategies to unintended consequences of PMs. Implementation strategies used by management affect providers' response to PMs, which in turn potentially undermines provision of high-quality patient-centered care. These include: 1) feedback reports to providers that are dissociated from a realistic capability to address performance gaps; 2) evaluative criteria set by managers that are at odds with patient-centered care; and 3) pressure created by managers' narrow focus on gaps in PMs that is viewed as more punitive than motivating. Next steps include working with VHA leaders to develop and test implementation approaches to help

  3. Key Performance Indicators to Measure Improvement After Implementation of Total Laboratory Automation Abbott Accelerator a3600.

    Science.gov (United States)

    Miler, Marijana; Nikolac Gabaj, Nora; Dukic, Lora; Simundic, Ana-Maria

    2017-12-27

    The aim of the study was to estimate improvement of work efficiency in the laboratory after implementation of total laboratory automation (TLA) by Abbott Accelerator a3600 in the laboratory with measuring different key performance indicators (KPIs) before and after TLA implementation. The objective was also to recommend steps for defining KPIs in other laboratories. For evaluation of improvement 10 organizational and/or technical KPIs were defined for all phases of laboratory work and measured before (November 2013) and after (from 2015 to 2017) TLA implementation. Out of 10 defined KPIs, 9 were successfully measured and significantly improved. Waiting time for registration of samples in the LIS was significantly reduced from 16 (9-28) to 9 (6-16) minutes after TLA (P performed at core biochemistry analyzers which significantly reduced walking distance for sample management (for more than 800 m per worker) and number of tube touches (for almost 50%). Analyzers downtime and engagement time for analyzers maintenance was reduced for 50 h and 28 h per month, respectively. TLA eliminated manual dilution of samples with extreme results with sigma values increment from 3.4 to >6 after TLA. Although median turnaround time TAT for potassium and troponin was higher (for approximately 20 min), number of outliers with TAT >60 min expressed as sigma values were satisfying (>3). Implementation of the TLA improved the most of the processes in our laboratory with 9 out of 10 properly defined and measured KPIs. With proper planning and defining of KPIs, every laboratory could measure changes in daily workflow.

  4. Factors associated with an evidence-based measure of implementation for the Adolescent Community Reinforcement Approach.

    Science.gov (United States)

    Garner, Bryan R; Hunter, Sarah B; Slaughter, Mary E; Han, Bing; Godley, Susan H

    2017-11-01

    An evidence-based measure of implementation (EBMI) is an implementation outcome measure shown to have predictive validity with one or more future-measured constructs of importance. The current study sought to identify correlates and predictors of an EBMI called procedure exposure. Garner et al. (2016) found procedure exposure to be an EBMI for the Adolescent Community Reinforcement Approach (A-CRA). The dataset included 76 community-based substance use treatment organizations located across the United States. Organizational-level regression analyses, which were framed within the context of Chaudoir et al. (2013) framework for predicting implementation outcomes, were used to examine predictors of A-CRA procedure exposure RESULTS: The Washington Circle's treatment initiation performance measure (B=5.05 [SE=1.60], p=0.002), as well as session exposure (B=0.18 [SE=0.06], p=0.003), were significant predictors of A-CRA procedure exposure in the backward stepwise regression analysis (Adjusted R-square=0.55). The Washington Circle's treatment engagement performance measure (B=7.93 [SE=0.77], pCRA procedure exposure but were not retained in the final model. Organizations implementing A-CRA are encouraged to make the following high priorities: (a) scheduling and completing a subsequent treatment session within 14days of their index session (treatment initiation) and (b) providing a targeted number of treatment sessions to each client (session exposure). To the extent organizations do this, they may be more likely to achieve higher levels of A-CRA procedure exposure. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Implementing and using quality measures for children's health care: perspectives on the state of the practice.

    Science.gov (United States)

    Shaller, Dale

    2004-01-01

    The objective of this study was to identify issues, obstacles, and priorities related to implementing and using child health care quality measures from the perspectives of 4 groups: 1) funders of quality-measurement development and implementation; 2) developers of quality measures; 3) users of quality measures (including Medicaid and the State Children's Health Insurance Program, employer coalitions, and consumer groups); and 4) health plans and providers (in their role as both subjects and users of quality measures). A series of semistructured interviews was conducted with approximately 40 opinion leaders drawn from these 4 groups. The interviews were conducted by telephone between September and December of 2001. Major topic areas covered in the interviews were similar across the groups. Topic areas included 1) strategic vision and/or objectives for funding, developing, or using quality measures for children's health care; 2) a brief summary of the specific quality measures funded, developed, or used; 3) issues and challenges facing funders and developers of measures; 4) major successes achieved; 5) obstacles to implementation and use of measures; and 6) priority needs for future funding. Leaders from all 4 groups acknowledge the importance of developing a robust set of quality measures that can serve multiple objectives and multiple audiences. Standardization of measures is viewed as a critical feature related to all objectives. An assessment of specific quality measures funded, developed, or used by strategic objective shows a high correlation between the uses intended by funders and developers and the actual applications of the various users. The most commonly cited measures across all groups are the Consumer Assessment of Health Plans Survey and Health Plan Employer Data and Information Set, followed by the Child and Adolescent Health Measurement Initiative and special topic studies to support quality-improvement applications (eg, asthma, diabetes, etc). The

  6. Bell’s measure and implementing quantum Fourier transform with orbital angular momentum of classical light

    Science.gov (United States)

    Song, Xinbing; Sun, Yifan; Li, Pengyun; Qin, Hongwei; Zhang, Xiangdong

    2015-01-01

    We perform Bell’s measurement for the non-separable correlation between polarization and orbital angular momentum from the same classical vortex beam. The violation of Bell’s inequality for such a non-separable classical correlation has been demonstrated experimentally. Based on the classical vortex beam and non-quantum entanglement between the polarization and the orbital angular momentum, the Hadamard gates and conditional phase gates have been designed. Furthermore, a quantum Fourier transform has been implemented experimentally. PMID:26369424

  7. Introduction to the special issue: toward implementing physiological measures in clinical child and adolescent assessments.

    Science.gov (United States)

    De Los Reyes, Andres; Aldao, Amelia

    2015-01-01

    The National Institute of Mental Health recently launched the Research Domain Criteria (RDoC). The RDoC is an initiative to improve classification of mental health concerns by promoting research on the brain mechanisms underlying these concerns, with the ultimate goal of developing interventions that target these brain mechanisms. A key focus of RDoC involves opening new lines of research examining patients' responses on biological measures. The RDoC presents unique challenges to mental health professionals who work with children and adolescents. Indeed, mental health professionals rarely integrate biological measures into clinical assessments. Thus, RDoC's ability to improve patient care rests, in part, on the development of strategies for implementing biological measures within mental health assessments. Further, mental health professionals already carry out comprehensive assessments that frequently yield inconsistent findings. These inconsistencies have historically posed challenges to interpreting research findings as well as assessment outcomes in practice settings. In this introductory article, we review key issues that informed the development of a special issue of articles demonstrating methods for implementing low-cost measures of physiological functioning in clinical child and adolescent assessments. We also outline a conceptual framework, informed by theoretical work on using and interpreting multiple informants' clinical reports (De Los Reyes, Thomas, Goodman, & Kundey, 2013 ), to guide hypothesis testing when using physiological measures within clinical child and adolescent assessments. This special issue and the conceptual model described in this article may open up new lines of research testing paradigms for implementing clinically feasible physiological measures in clinical child and adolescent assessments.

  8. Contractors Road Heavy Equipment Area SWMU 055 Corrective Measures Implementation Progress Report

    Science.gov (United States)

    Dorman, Lane

    2015-01-01

    This Corrective Measures Implementation (CMI) Progress Report, Revision 1, for Contractor's Road Heavy Equipment (CRHE) Area Solid Waste Management Unit (SWMU) Number 055 was prepared by Geosyntec Consultants (Geosyntec) for the National Aeronautics and Space Administration (NASA) under contract number NNK09CA02B, Delivery Order NNK09CA62D and Project Number PCN ENV-2324. This CMI Progress Report documents: (i) activities conducted as part of supplemental assessment activities completed from June 2009 through November 2014; (ii) Engineering Evaluation (EE) Advanced Data Packages (ADPs); and (iii) recommendations for future activities related to corrective measures at the Site.

  9. Method and apparatus for implementing material thermal property measurement by flash thermal imaging

    Science.gov (United States)

    Sun, Jiangang

    2017-11-14

    A method and apparatus are provided for implementing measurement of material thermal properties including measurement of thermal effusivity of a coating and/or film or a bulk material of uniform property. The test apparatus includes an infrared camera, a data acquisition and processing computer coupled to the infrared camera for acquiring and processing thermal image data, a flash lamp providing an input of heat onto the surface of a two-layer sample with an enhanced optical filter covering the flash lamp attenuating an entire infrared wavelength range with a series of thermal images is taken of the surface of the two-layer sample.

  10. Experiences with the implementation of measures and tools for road safety improvement

    Energy Technology Data Exchange (ETDEWEB)

    Mikusova, M.

    2016-07-01

    The paper presents an overview on the road safety measures implemented in the framework of the “SOL – Save our lives” project. It contains summarization of general knowledge regarding the efficiency of the measures applied and conclusions from the analyses of developed strategies and action plans, including common issues, strengths and weaknesses of developed tools and puts these in the context of wider European Road Safety strategies. The purpose of the paper is to provide recommendations for an effective professional development of road safety programs at community level in the context of sustainable mobility. (Author)

  11. The Modern Concept of Measuring Efficiency - Implementation and Attitudes of BSC

    Directory of Open Access Journals (Sweden)

    Tomić Slavica

    2017-08-01

    Full Text Available In modern information environment it is not enough that companies measure their results only using data from the past. BSC (Balanced Scorecard can be considered superior to previous approaches of strategic performance management that focus only on financial measures. Balanced Scorecard includes both financial and non-financial measures that drive future financial organization performances. The research questions, which this work provides answers to, is concerned by the level of awareness of 37 surveyed managers of small, medium and large companies in the Republic of Serbia with the BSC, then identifying the degree of BSC implementation in these companies, as well as the reasons for not adopting the BSC and tests which use similar performance measures.

  12. Design and implementation of a low-cost multichannel seismic noise recorder for array measurements

    Science.gov (United States)

    Soler-Llorens, Juan Luis; Juan Giner-Caturla, Jose; Molina-Palacios, Sergio; Galiana-Merino, Juan Jose; Rosa-Herranz, Julio; Agea-Medina, Noelia

    2017-04-01

    Soil characterization is the starting point for seismic hazard studies. Currently, the methods based on ambient noise measurements are very used because they are non-invasive methods and relatively easy to implement in urban areas. Among these methods, the analysis of array measurements provides the dispersion curve and subsequently the shear-wave velocity profile associated to the site under study. In this case, we need several sensors recording simultaneously and a data acquisition system with one channel by sensor, what can become the complete equipment unaffordable for small research groups. In this work, we have designed and implemented a low-cost multichannel ambient noise recorder for array measurements. The complete system is based on Arduino, an open source electronic development platform, which allows recording 12 differential input channels simultaneously. Besides, it is complemented with a conditioning circuit that includes an anti-aliasing filter and a selectable gain between 0 and 40dB. The data acquisition is set up through a user-friendly graphical user interface. It is important to note that the electronic scheme as well as the programming code are open hardware and software, respectively, so it allows other researchers to suite the system to their particular requirements. The developed equipment has been tested at several sites around the province of Alicante (southeast of Spain), where the soil characteristics are well-known from previous studies. Array measurements have been taken and after that, the recorded data have been analysed using the frequency-wavenumber (f-k) and the extended spatial autocorrelation (ESAC) methods. The comparison of the obtained dispersion curves with the ones obtained in previous studies shows the suitability of the implemented low-cost system for array measurements.

  13. Improving MC and A Oversight in Russia by Implementing Measurement and Training Programs

    International Nuclear Information System (INIS)

    Bokov, Dmitry; Byers, Kenneth R.

    2004-01-01

    As the Russian State regulatory agency responsible for oversight of nuclear material control and accounting (MC and A), Gosatomnadzor of Russia (GAN) determines the status of the MC and A programs at Russian facilities. Last year, GAN developed and implemented their Nuclear Material Measurement Program Plan which documents current non-destructive assay (NDA) measurement capability in all regions of GAN; provides justification for upgrades to equipment, procedures and training; and defines the inspector-facility operator interface as it relates to NDA measurement equipment use. This Program Plan has helped to give the GAN inspection measurements more legal and official status as an oversight tool, and has also helped to improve other GAN MC and A oversight activities. These improvements include developing a tamper-indicating device program, conducting NDA workshops at specific Russian nuclear facilities to better train MC and A inspectors, and developing training evaluation programs. The Program is an important tool to address the GAN role in oversight of the Russian Federal Information System nuclear material database. This paper describes the feedback received from the GAN regional offices on the implementation of the Program Plan during its first year in operation and how the Program Plan has affected other GAN inspection activities to improve MC and A oversight.

  14. Implementing for Sustainability: Promoting Use of a Measurement Feedback System for Innovation and Quality Improvement.

    Science.gov (United States)

    Douglas, Susan; Button, Suzanne; Casey, Susan E

    2016-05-01

    Measurement feedback systems (MFSs) are increasingly recognized as evidence-based treatments for improving mental health outcomes, in addition to being a useful administrative tool for service planning and reporting. Promising research findings have driven practice administrators and policymakers to emphasize the incorporation of outcomes monitoring into electronic health systems. To promote MFS integrity and protect against potentially negative outcomes, it is vital that adoption and implementation be guided by scientifically rigorous yet practical principles. In this point of view, the authors discuss and provide examples of three user-centered and theory-based principles: emphasizing integration with clinical values and workflow, promoting administrative leadership with the 'golden thread' of data-informed decision-making, and facilitating sustainability by encouraging innovation. In our experience, enacting these principles serves to promote sustainable implementation of MFSs in the community while also allowing innovation to occur, which can inform improvements to guide future MFS research.

  15. Proposed Performance Measures and Strategies for Implementation of the Fatigue Risk Management Guidelines for Emergency Medical Services

    Science.gov (United States)

    2018-01-11

    Background: Performance measures are a key component of implementation, dissemination, and evaluation of evidence-based guidelines (EBGs). We developed performance measures for Emergency Medical Services (EMS) stakeholders to enable the implementatio...

  16. Start of operation of the barrel measuring facility II-01. Implementation into operational processes

    International Nuclear Information System (INIS)

    Buesing, B.; Escher, M.

    2013-01-01

    For the operation of the barrel measuring facility (FAME) II-01 a variety requirements to the measuring techniques were defined and tested in the frame of start-up. The used mechanical engineering and measuring technique complies with the state-of-the-art. Using the barrel measuring facility quality assured determinations of the dose rate and the nuclide-specific activity inventory were performed. For the evaluation of the gamma spectrometric measurements of FAME II-01 appropriately qualified personnel is available. The implementation of the facility in combination with the connection to the data base system PIK-AS and AVK it guaranteed that important data are available in real-time for the measuring process and the subsequent work steps. Besides this it is guaranteed that using the import/export functions relevant data are reviewed, supplemented and exchanged between the systems without transfer errors. The determined data of the dose rate and gamma spectrometric measurements allow an activity determination of the waste package with quality assurance and close to reality. Conservative assumptions in the frame of activity calculations for the later final disposal can be reduced. The automated operation of FAME allows also the reduction of radiation exposure of the personnel.

  17. Measuring the food service environment: development and implementation of assessment tools.

    Science.gov (United States)

    Minaker, Leia M; Raine, Kim D; Cash, Sean B

    2009-01-01

    The food environment is increasingly being implicated in the obesity epidemic, though few reported measures of it exist. In order to assess the impact of the food environment on food intake, valid measures must be developed and tested. The current study describes the development of a food service environment assessment tool and its implementation in a community setting. A descriptive study with mixed qualitative and quantitative methods at a large, North American university campus was undertaken. Measures were developed on the basis of a conceptual model of nutrition environments. Measures of community nutrition environment were the number, type and hours of operation of each food service outlet on campus. Measures of consumer nutrition environment were food availability, food affordability, food promotion and nutrition information availability. Seventy-five food service outlets within the geographic boundaries were assessed. Assessment tools could be implemented in a reasonable amount of time and showed good face and content validity. The food environments were described and measures were grouped so that food service outlet types could be compared in terms of purchasing convenience, cost/value, healthy food promotion and health. Food service outlet types that scored higher in purchasing convenience and cost/value tended to score lower in healthy food promotion and health. This study adds evidence that food service outlet types that are convenient to consumers and supply high value (in terms of calories per dollar) tend to be less health-promoting. Results from this study also suggest the possibility of characterizing the food environment according to the type of food service outlet observed.

  18. The implementation of nuclear methods for density measurements on Romanian roads

    International Nuclear Information System (INIS)

    Tripadus, V.; Craciun, L.; Peticila, M.; Florea, N.

    2000-01-01

    The implementation of nuclear methods in field measurements presumes steps concerning the fulfillment of the many requirements to be undertaken. First of all the owner of the nuclear equipment must obtain all the documents imposed by the Romanian laws. The second step is connected with the recalibration of the equipment in order to obtain an improved precision of the measurements. In the last few years National Administration of Roads, Research Institute of Roads together with National Institute of Physics and Nuclear Engineering, made many efforts in order to implement nuclear methods destined to determine both the density and the moisture content either on asphalt or on compact soils. The American companies CPN and Troxler produced the equipment. On the basis of the comparison between nuclear and core density measurements the correction factor of the equipment was established. A special attention was paid to the definitions of different physical quantities occurring in Romanian Standards in order to connect them properly with the American ones. (authors)

  19. Implementation of learning outcome attainment measurement system in aviation engineering higher education

    Science.gov (United States)

    Salleh, I. Mohd; Mat Rani, M.

    2017-12-01

    This paper aims to discuss the effectiveness of the Learning Outcome Attainment Measurement System in assisting Outcome Based Education (OBE) for Aviation Engineering Higher Education in Malaysia. Direct assessments are discussed to show the implementation processes that become a key role in the successful outcome measurement system. A case study presented in this paper involves investigation on the implementation of the system in Aircraft Structure course for Bachelor in Aircraft Engineering Technology program in UniKL-MIAT. The data has been collected for five semesters, starting from July 2014 until July 2016. The study instruments used include the report generated in Learning Outcomes Measurements System (LOAMS) that contains information on the course learning outcomes (CLO) individual and course average performance reports. The report derived from LOAMS is analyzed and the data analysis has revealed that there is a positive significant correlation between the individual performance and the average performance reports. The results for analysis of variance has further revealed that there is a significant difference in OBE grade score among the report. Independent samples F-test results, on the other hand, indicate that the variances of the two populations are unequal.

  20. Contractors Road Heavy Equipment Area SWMU 055 Corrective Measures Implementation Progress Report Kennedy Space Center, Florida

    Science.gov (United States)

    Johnson, Jill W. (Compiler)

    2015-01-01

    This Corrective Measures Implementation (CMI) Progress Report documents: (i) activities conducted as part of supplemental assessment activities completed from June 2009 through November 2014; (ii) Engineering Evaluation (EE) Advanced Data Packages (ADPs); and (iii) recommendations for future activities related to corrective measures at the Site. Applicable meeting minutes are provided as Appendix A. The following EE ADPs for CRHE are included with this CMI Progress Report: center dot Supplemental Site Characterization ADP (Step 1 EE) (Appendix B) center dot Site Characterization ADP (Step 1 EE) for Hot Spot 1 (HS1) (Appendix C) center dot Remedial Alternatives Evaluation (Step 2 EE) ADP for HS1 (Appendix D) center dot Interim Measures Work Plan (Step 3 EE) ADP for HS1 (Appendix E) center dot Site Characterization ADP (Step 1 EE) ADP for Hot Spot 2 (HS2), High Concentration Plume (HCP), and Low Concentration Plume (LCP) (Appendix F) A summary of direct-push technology (DPT) and groundwater monitoring well sampling results are provided in Appendices G and H, respectively. The Interim Land Use Control Implementation Plan (LUCIP) is provided as Appendix I. Monitoring well completion reports, other applicable field forms, survey data, and analytical laboratory reports are provided as Appendices J through M, respectively, in the electronic copy of this document. Selected Site photographs are provided in Appendix N. The interim groundwater monitoring plan and document revision log are included as Appendices O and P, respectively. KSC Electronic Data Deliverable (KEDD) files are provided on the attached compact disk.

  1. Experiments to Evaluate and Implement Passive Tracer Gas Methods to Measure Ventilation Rates in Homes

    Energy Technology Data Exchange (ETDEWEB)

    Lunden, Melissa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Faulkner, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Heredia, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cohn, Sebastian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dickerhoff, Darryl [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Noris, Federico [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Logue, Jennifer [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Brett [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sherman, Max H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-10-01

    This report documents experiments performed in three homes to assess the methodology used to determine air exchange rates using passive tracer techniques. The experiments used four different tracer gases emitted simultaneously but implemented with different spatial coverage in the home. Two different tracer gas sampling methods were used. The results characterize the factors of the execution and analysis of the passive tracer technique that affect the uncertainty in the calculated air exchange rates. These factors include uncertainties in tracer gas emission rates, differences in measured concentrations for different tracer gases, temporal and spatial variability of the concentrations, the comparison between different gas sampling methods, and the effect of different ventilation conditions.

  2. Maximum entropy algorithm and its implementation for the neutral beam profile measurement

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Wook; Cho, Gyu Seong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Cho, Yong Sub [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    A tomography algorithm to maximize the entropy of image using Lagrangian multiplier technique and conjugate gradient method has been designed for the measurement of 2D spatial distribution of intense neutral beams of KSTAR NBI (Korea Superconducting Tokamak Advanced Research Neutral Beam Injector), which is now being designed. A possible detection system was assumed and a numerical simulation has been implemented to test the reconstruction quality of given beam profiles. This algorithm has the good applicability for sparse projection data and thus, can be used for the neutral beam tomography. 8 refs., 3 figs. (Author)

  3. Maximum entropy algorithm and its implementation for the neutral beam profile measurement

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Wook; Cho, Gyu Seong [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Cho, Yong Sub [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    A tomography algorithm to maximize the entropy of image using Lagrangian multiplier technique and conjugate gradient method has been designed for the measurement of 2D spatial distribution of intense neutral beams of KSTAR NBI (Korea Superconducting Tokamak Advanced Research Neutral Beam Injector), which is now being designed. A possible detection system was assumed and a numerical simulation has been implemented to test the reconstruction quality of given beam profiles. This algorithm has the good applicability for sparse projection data and thus, can be used for the neutral beam tomography. 8 refs., 3 figs. (Author)

  4. The implementing of high resolution time measuring circuit based on FPGA

    International Nuclear Information System (INIS)

    Zhang Ji; Zeng Yun; Wang Zheng; Li Quiju; Lu Jifang; Wu Jinyuan

    2011-01-01

    It presents the implementing of TDC based on FPGA. The fine timing function part is accomplished through the time interpolators that are composed of the carry chain of intrinsic adders in FPGA. This architecture dates back to the latest technology-WUTDC (Wave Union TDC) that is developed to sub-divide the ultra-wide bins and improve the measure resolution. The board and the online test have been proved that the linearity of converters is satisfying and the time resolution is better than 40 ps. (authors)

  5. Variation Analysis of Physiological Traits in Betula platyphylla Overexpressing TaLEA-ThbZIP Gene under Salt Stress.

    Directory of Open Access Journals (Sweden)

    Xiyang Zhao

    Full Text Available The aim of this study was to determine whether transgenic birch (Betula platyphylla ectopic overexpressing a late embryogenesis abundant (LEA gene and a basic leucine zipper (bZIP gene from the salt-tolerant genus Tamarix (salt cedar show increased tolerance to salt (NaCl stress. Co-transfer of TaLEA and ThbZIP in birch under the control of two independent CaMV 35S promoters significantly enhanced salt stress. PCR and northern blot analyses indicated that the two genes were ectopically overexpressed in several dual-gene transgenic birch lines. We compared the effects of salt stress among three transgenic birch lines (L-4, L-5, and L-8 and wild type (WT. In all lines, the net photosynthesis values were higher before salt stress treatment than afterwards. After the salt stress treatment, the transgenic lines L-4 and L-8 showed higher values for photosynthetic traits, chlorophyll fluorescence, peroxidase and superoxide dismutase activities, and lower malondialdehyde and Na+ contents, compared with those in WT and L-5. These different responses to salt stress suggested that the transcriptional level of the TaLEA and ThbZIP genes differed among the transgenic lines, resulting in a variety of genetic and phenotypic effects. The results of this research can provide a theoretical basis for the genetic engineering of salt-tolerant trees.

  6. The implementation of depth measurement and related algorithms based on binocular vision in embedded AM5728

    Science.gov (United States)

    Deng, Zhiwei; Li, Xicai; Shi, Junsheng; Huang, Xiaoqiao; Li, Feiyan

    2018-01-01

    Depth measurement is the most basic measurement in various machine vision, such as automatic driving, unmanned aerial vehicle (UAV), robot and so on. And it has a wide range of use. With the development of image processing technology and the improvement of hardware miniaturization and processing speed, real-time depth measurement using dual cameras has become a reality. In this paper, an embedded AM5728 and the ordinary low-cost dual camera is used as the hardware platform. The related algorithms of dual camera calibration, image matching and depth calculation have been studied and implemented on the hardware platform, and hardware design and the rationality of the related algorithms of the system are tested. The experimental results show that the system can realize simultaneous acquisition of binocular images, switching of left and right video sources, display of depth image and depth range. For images with a resolution of 640 × 480, the processing speed of the system can be up to 25 fps. The experimental results show that the optimal measurement range of the system is from 0.5 to 1.5 meter, and the relative error of the distance measurement is less than 5%. Compared with the PC, ARM11 and DMCU hardware platforms, the embedded AM5728 hardware is good at meeting real-time depth measurement requirements in ensuring the image resolution.

  7. The design and implementation of a windowing interface pinch force measurement system

    Science.gov (United States)

    Ho, Tze-Yee; Chen, Yuanu-Joan; Chung, Chin-Teng; Hsiao, Ming-Heng

    2010-02-01

    This paper presents a novel windowing interface pinch force measurement system that is basically based on an USB (Universal Series Bus) microcontroller which mainly processes the sensing data from the force sensing resistance sensors mounted on five digits. It possesses several friendly functions, such as the value and curve trace of the applied force by a hand injured patient displayed in real time on a monitoring screen, consequently, not only the physician can easily evaluate the effect of hand injury rehabilitation, but also the patients get more progressive during the hand physical therapy by interacting with the screen of pinch force measurement. In order to facilitate the pinch force measurement system and make it friendly, the detail hardware design and software programming flowchart are described in this paper. Through a series of carefully and detailed experimental tests, first of all, the relationship between the applying force and the FSR sensors are measured and verified. Later, the different type of pinch force measurements are verified by the oscilloscope and compared with the corresponding values and waveform traces in the window interface display panel to obtain the consistency. Finally, a windowing interface pinch force measurement system based on the USB microcontroller is implemented and demonstrated. The experimental results show the verification and feasibility of the designed system.

  8. Implementation of Positive Operator-Valued Measure in Passive Faraday Mirror Attack

    International Nuclear Information System (INIS)

    Wang Wei-Long; Gao Ming; Ma Zhi

    2015-01-01

    Passive Faraday-mirror (PFM) attack is based on imperfect Faraday mirrors in practical quantum cryptography systems and a set of three-dimensional Positive Operator-Valued Measure (POVM) operators plays an important role in this attack. In this paper, we propose a simple scheme to implement the POVM in PFM attack on an Faraday–Michelson quantum cryptography system. Since the POVM can not be implemented directly with previous methods, in this scheme it needs to expand the states sent by Alice and the POVM operators in the attack into four-dimensional Hilbert space first, without changing the attacking effect by calculation. Based on the methods proposed by Ahnert and Payne, the linear-optical setup for implementing the POVM operators is derived. At last, the complete setup for realizing the PFM attack is presented with all parameters. Furthermore, our scheme can also be applied to realize PFM attack on a plug-and-play system by changing the parameters in the setup. (paper)

  9. Organizational readiness for implementing change: a psychometric assessment of a new measure.

    Science.gov (United States)

    Shea, Christopher M; Jacobs, Sara R; Esserman, Denise A; Bruce, Kerry; Weiner, Bryan J

    2014-01-10

    Organizational readiness for change in healthcare settings is an important factor in successful implementation of new policies, programs, and practices. However, research on the topic is hindered by the absence of a brief, reliable, and valid measure. Until such a measure is developed, we cannot advance scientific knowledge about readiness or provide evidence-based guidance to organizational leaders about how to increase readiness. This article presents results of a psychometric assessment of a new measure called Organizational Readiness for Implementing Change (ORIC), which we developed based on Weiner's theory of organizational readiness for change. We conducted four studies to assess the psychometric properties of ORIC. In study one, we assessed the content adequacy of the new measure using quantitative methods. In study two, we examined the measure's factor structure and reliability in a laboratory simulation. In study three, we assessed the reliability and validity of an organization-level measure of readiness based on aggregated individual-level data from study two. In study four, we conducted a small field study utilizing the same analytic methods as in study three. Content adequacy assessment indicated that the items developed to measure change commitment and change efficacy reflected the theoretical content of these two facets of organizational readiness and distinguished the facets from hypothesized determinants of readiness. Exploratory and confirmatory factor analysis in the lab and field studies revealed two correlated factors, as expected, with good model fit and high item loadings. Reliability analysis in the lab and field studies showed high inter-item consistency for the resulting individual-level scales for change commitment and change efficacy. Inter-rater reliability and inter-rater agreement statistics supported the aggregation of individual level readiness perceptions to the organizational level of analysis. This article provides evidence in

  10. Implementation of the Electronics Chain for the Bunch by Bunch Intensity Measurement Devices for the LHC

    CERN Document Server

    Belohrad, D; Ludwig, M; Savioz, J J; Thoulet, S

    2009-01-01

    The fast beam intensity measurements for the LHC are provided by eight Fast Beam Current Transformers (FBCT). Four FBCTs installed in the LHC rings are capable of providing both bunch-by-bunch and total turn-by-turn beam intensity information. A further four FBCTs, two in each of the LHC dump lines, are used to measure the total extracted beam intensity. In addition to providing intensity information the ring FBCTs also send signals to the machine protection system. This increases the complexity of both the RF front-end and the digital acquisition parts of the signal processing chain. The aim of this paper is to discuss the implemented hardware solution for the FBCT system, in particular with respect to the signal distribution, FPGA signal processing, calibration, and interaction of the FBCTs with the machine protection chain.

  11. Sound quality measures for speech in noise through a commercial hearing aid implementing digital noise reduction.

    Science.gov (United States)

    Ricketts, Todd A; Hornsby, Benjamin W Y

    2005-05-01

    This brief report discusses the affect of digital noise reduction (DNR) processing on aided speech recognition and sound quality measures in 14 adults fitted with a commercial hearing aid. Measures of speech recognition and sound quality were obtained in two different speech-in-noise conditions (71 dBA speech, +6 dB SNR and 75 dBA speech, +1 dB SNR). The results revealed that the presence or absence of DNR processing did not impact speech recognition in noise (either positively or negatively). Paired comparisons of sound quality for the same speech in noise signals, however, revealed a strong preference for DNR processing. These data suggest that at least one implementation of DNR processing is capable of providing improved sound quality, for speech in noise, in the absence of improved speech recognition.

  12. Implementing health management information systems: measuring success in Korea's health centers.

    Science.gov (United States)

    Chae, Y M; Kim, S I; Lee, B H; Choi, S H; Kim, I S

    1994-01-01

    This article analyses the effects that the introduction and adoption of a health management information system (HMIS) can have on both the productivity of health center staff as well as on user-satisfaction. The focus is upon the service provided by the Kwonsun Health Center located in Suwon City, Korea. Two surveys were conducted to measure the changes in productivity and adoption (knowledge, persuasion, decision, implementation and confirmation) of health center staff over time. In addition, a third survey was conducted to measure the effects of HMIS on the level of satisfaction perceived by the visitors, by comparing the satisfaction level between the study health center and a similar health center identified as a control. The results suggest that HMIS increased the productivity and satisfaction of the staff but did not increase their persuasion and decision levels; and, that is also succeeded in increasing the levels of visitors' satisfaction with the services provided.

  13. Robust Design Impact Metrics: Measuring the effect of implementing and using Robust Design

    DEFF Research Database (Denmark)

    Ebro, Martin; Olesen, Jesper; Howard, Thomas J.

    2014-01-01

    Measuring the performance of an organisation’s product development process can be challenging due to the limited use of metrics in R&D. An organisation considering whether to use Robust Design as an integrated part of their development process may find it difficult to define whether it is relevant......, and afterwards measure the effect of having implemented it. This publication identifies and evaluates Robust Design-related metrics and finds that 2 metrics are especially useful: 1) Relative amount of R&D Resources spent after Design Verification and 2) Number of ‘change notes’ after Design Verification....... The metrics have been applied in a case company to test the assumptions made during the evaluation. It is concluded that the metrics are useful and relevant, but further work is necessary to make a proper overview and categorisation of different types of robustness related metrics....

  14. Effects of policy measures implemented in Denmark on nitrogen pollution of the aquatic environment

    DEFF Research Database (Denmark)

    Kronvang, Brian; Andersen, Hans Estrup; Børgesen, Christen Duus

    2008-01-01

    Since 1985, seven national Action Plans (AP) have been implemented in Denmark to reduce nitrogen discharges from point sources and nitrogen losses from agriculture. The instruments applied include regulations on point source discharges from waste water treatment plants, area-related measures, e.g...... to delays in travel time in groundwater. Until now, the regulation has been performed on a national scale. A more regional or local approach is believed to be necessary in future to meet the demands of the EU Water Framework Directive......Since 1985, seven national Action Plans (AP) have been implemented in Denmark to reduce nitrogen discharges from point sources and nitrogen losses from agriculture. The instruments applied include regulations on point source discharges from waste water treatment plants, area-related measures, e...... indicators were defined: nitrogen discharges from point sources, nitrogen surplus in agriculture, nitrogen leaching from agricultural land and nitrogen concentrations and loads in surface waters. Since the introduction of mitigation programmes, discharges of nitrogen from point sources have been reduced...

  15. Providers' perceptions of the implementation of a performance measurement system for substance abuse treatment: A process evaluation of the Service Quality Measures initiative.

    Science.gov (United States)

    Myers, Bronwyn; Williams, Petal Petersen; Johnson, Kim; Govender, Rajen; Manderscheid, Ron; Koch, J Randy

    2016-02-22

    In South Africa, concerns exist about the quality of substance abuse treatment. We developed a performance measurement system, known as the Service Quality Measures (SQM) initiative, to monitor the quality of treatment and assess efforts to improve quality of care. In 2014, the SQM system was implemented at six treatment sites to evaluate how implementation protocols could be improved in preparation for wider roll-out. To describe providers' perceptions of the feasibility and acceptability of implementing the SQM system, including barriers to and facilitators of implementation. We conducted 15 in-depth interviews (IDIs) with treatment providers from six treatment sites (two sites in KwaZulu-Natal and four in the Western Cape). Providers were asked about their experiences in implementing the system, the perceived feasibility of the system, and barriers to implementation. All IDIs were audio-recorded and transcribed verbatim. A framework approach was used to analyse the data. Providers reported that the SQM system was feasible to implement and acceptable to patients and providers. Issues identified through the IDIs included a perceived lack of clarity about sequencing of key elements in the implementation of the SQM system, questions on integration of the system into clinical care pathways, difficulties in tracking patients through the system, and concerns about maximising patient participation in the process. Findings suggest that the SQM system is feasible to implement and acceptable to providers, but that some refinements to the implementation protocols are needed to maximise patient participation and the likelihood of sustained implementation.

  16. Salt deposits of Los Medanos Area, Eddy and Lea counties, New Mexico

    International Nuclear Information System (INIS)

    Jones, C.L.; Cooley, M.E.; Bachman, G.O.

    1973-01-01

    The salt deposits of Los Medanos area, in Eddy and Lea Counties, southeastern New Mexico, are being considered for possible use as a receptacle for radioactive wastes in a pilot-plant repository. The salt deposits of the area are in three evaporite formations: the Castile, Salado, and Rustler formations, in ascending order. The three formations are dominantly anhydrite and rock salt; but some gypsum, potassium ores, carbonate rock, and fine-grained clastic rocks are present. They have combined thicknesses of slightly more than 4000 feet, of which roughly one-half belongs to the Salado. Both the Castile and the Rustler are richer in anhydrite and poorer in rock salt than the Salado, and they provide this salt-rich formation with considerable protection from any fluids which might be present in underlying or overlying rocks. The Salado Formation contains many thick seams of rock salt at moderate depths below the surface. The rock salt has a substantial cover of well-consolidated rocks, and it is very little deformed structurally. 37 refs., 48 figs., 4 tabs

  17. A survey on existing challenges of BSC implementation for performance measurement

    Directory of Open Access Journals (Sweden)

    Behdad Gitinejad

    2014-04-01

    Full Text Available The balanced scorecard (BSC is a strategic oriented tool used comprehensively in profit and nonprofit organizations all over the world to synchronize routine processes of organizations to the mission and strategy, improve inner and outter communications, control organization performance toward strategic targets. BSC has emerged from a simple performance measurement framework to a comprehensive strategic management system. It changes an organization’s strategic plan from a passive document to an active guideline for the organization on a daily basis and provides a helpful assistance that not only enables performance measurements, but also helps planners identify what should be accomplished and measured. This study focuses on how BSC is adopted as a tool for measuring effectiveness of strategy implementation in these organizations. This study adapts the BSC as a powerful tool for reaching an organization’s performance in four significant areas: Financial perspective, Customer-Market perspective, Internal Processes perspective and Learning & Growth perspective. The results suggest that governmental organizations are somehow successful in achieving their objectives in various degrees.

  18. Non-Contact Surface Roughness Measurement by Implementation of a Spatial Light Modulator

    Directory of Open Access Journals (Sweden)

    Laura Aulbach

    2017-03-01

    Full Text Available The surface structure, especially the roughness, has a significant influence on numerous parameters, such as friction and wear, and therefore estimates the quality of technical systems. In the last decades, a broad variety of surface roughness measurement methods were developed. A destructive measurement procedure or the lack of feasibility of online monitoring are the crucial drawbacks of most of these methods. This article proposes a new non-contact method for measuring the surface roughness that is straightforward to implement and easy to extend to online monitoring processes. The key element is a liquid-crystal-based spatial light modulator, integrated in an interferometric setup. By varying the imprinted phase of the modulator, a correlation between the imprinted phase and the fringe visibility of an interferogram is measured, and the surface roughness can be derived. This paper presents the theoretical approach of the method and first simulation and experimental results for a set of surface roughnesses. The experimental results are compared with values obtained by an atomic force microscope and a stylus profiler.

  19. Overexpression of TaLEA gene from Tamarix androssowii improves salt and drought tolerance in transgenic poplar (Populus simonii × P. nigra.

    Directory of Open Access Journals (Sweden)

    Weidong Gao

    Full Text Available Late embryogenesis abundant (LEA genes were confirmed to confer resistance to drought and water deficiency. An LEA gene from Tamarixandrossowii (named TaLEA was transformed into Xiaohei poplar (Populussimonii × P. nigra via Agrobacterium. Twenty-five independent transgenic lines were obtained that were resistant to kanamycin, and 11 transgenic lines were randomly selected for further analysis. The polymerase chain reaction (PCR and ribonucleic acid (RNA gel blot indicated that the TaLEA gene had been integrated into the poplar genome. The height growth rate, malondialdehyde (MDA content, relative electrolyte leakage and damages due to salt or drought to transgenic and non-transgenic plants were compared under salt and drought stress conditions. The results showed that the constitutive expression of the TaLEA gene in transgenic poplars could induce an increase in height growth rate and a decrease in number and severity of wilted leaves under the salt and drought stresses. The MDA content and relative electrolyte leakage in transgenic lines under salt and drought stresses were significantly lower compared to those in non-transgenic plants, indicating that the TaLEA gene may enhance salt and drought tolerance by protecting cell membranes from damage. Moreover, amongst the lines analyzed for stress tolerance, the transgenic line 11 (T11 showed the highest tolerance levels under both salinity and drought stress conditions. These results indicated that the TaLEA gene could be a salt and drought tolerance candidate gene and could confer a broad spectrum of tolerance under abiotic stresses in poplars.

  20. Overexpression of TaLEA gene from Tamarix androssowii improves salt and drought tolerance in transgenic poplar (Populus simonii × P. nigra).

    Science.gov (United States)

    Gao, Weidong; Bai, Shuang; Li, Qingmei; Gao, Caiqiu; Liu, Guifeng; Li, Guangde; Tan, Feili

    2013-01-01

    Late embryogenesis abundant (LEA) genes were confirmed to confer resistance to drought and water deficiency. An LEA gene from Tamarixandrossowii (named TaLEA) was transformed into Xiaohei poplar (Populussimonii × P. nigra) via Agrobacterium. Twenty-five independent transgenic lines were obtained that were resistant to kanamycin, and 11 transgenic lines were randomly selected for further analysis. The polymerase chain reaction (PCR) and ribonucleic acid (RNA) gel blot indicated that the TaLEA gene had been integrated into the poplar genome. The height growth rate, malondialdehyde (MDA) content, relative electrolyte leakage and damages due to salt or drought to transgenic and non-transgenic plants were compared under salt and drought stress conditions. The results showed that the constitutive expression of the TaLEA gene in transgenic poplars could induce an increase in height growth rate and a decrease in number and severity of wilted leaves under the salt and drought stresses. The MDA content and relative electrolyte leakage in transgenic lines under salt and drought stresses were significantly lower compared to those in non-transgenic plants, indicating that the TaLEA gene may enhance salt and drought tolerance by protecting cell membranes from damage. Moreover, amongst the lines analyzed for stress tolerance, the transgenic line 11 (T11) showed the highest tolerance levels under both salinity and drought stress conditions. These results indicated that the TaLEA gene could be a salt and drought tolerance candidate gene and could confer a broad spectrum of tolerance under abiotic stresses in poplars.

  1. A comparison of Lea Symbol vs ETDRS letter distance visual acuity in a population of young children with a high prevalence of astigmatism.

    Science.gov (United States)

    Dobson, Velma; Clifford-Donaldson, Candice E; Miller, Joseph M; Garvey, Katherine A; Harvey, Erin M

    2009-06-01

    To compare visual acuity results obtained by use of the Lea Symbols chart with results obtained with Early Treatment Diabetic Retinopathy Study (ETDRS) charts in young children who are members of a population with a high prevalence of astigmatism. Subjects were 438 children ages 5 through 7 years who were enrolled in kindergarten or first grade on the Tohono O'odham Reservation: 241 (55%) had astigmatism >or=1.00 D in one or both eyes (range, 0.00-6.75 D). While wearing best correction, each child had right eye visual acuity tested with the 62 cm by 65 cm Lea Symbols chart at 3 m and with the 62 cm by 65 cm ETDRS chart at 4 m. Visual acuity was scored as the smallest optotype size at which the child correctly identified 3 of a maximum of 5 optotypes. ETDRS visual acuity also was scored based on the total number of letters that the child correctly identified. Correlation between Lea Symbols visual acuity and ETDRS visual acuity was 0.78 (p < 0.001). Mean Lea Symbols visual acuity was one-half line (0.04-0.06 logMAR) better than mean ETDRS visual acuity (p < 0.001). The difference between Lea Symbols and ETDRS visual acuity was not correlated with the mean of the Lea Symbols and ETDRS visual acuity scores, which ranged from -0.3 logMAR (20/10) to 0.74 logMAR (20/110). In this population of young children, in whom the primary source of reduced visual acuity is astigmatism-related amblyopia, the Lea Symbols chart produced visual acuity scores that were about 0.5 line better than visual acuity scores obtained with ETDRS charts.

  2. Implementing the water framework directive in Denmark - Lessons on agricultural measures from a legal and regulatory perspective

    DEFF Research Database (Denmark)

    Jacobsen, Brian H.; Anker, Helle Tegner; Baaner, Lasse

    2017-01-01

    One of the major challenges in the implementation of the Water Framework Directive (WFD) is how to address diffuse agricultural pollution of the aquatic environment. In Denmark the implementation of agricultural measures has been fraught with difficulty in the form of delays and legal proceedings...... and a policy failure. It is argued that the adoption of more flexible measures to be implemented at the local level could have resulted in fewer difficulties from an economic and legal point of view as measures could have been applied where there was a clear environmental benefit, and possibly also at a lower...

  3. Implementation of an Enhanced Measurement Control Program for handling nuclear safety samples at WSRC

    International Nuclear Information System (INIS)

    Boler-Melton, C.; Holland, M.K.

    1991-01-01

    In the separation and purification of nuclear material, nuclear criticality safety (NCS) is of primary concern. The primary nuclear criticality safety controls utilized by the Savannah River Site (SRS) Separations Facilities involve administrative and process equipment controls. Additional assurance of NCS is obtained by identifying key process hold points where sampling is used to independently verify the effectiveness of production control. Nuclear safety measurements of samples from these key process locations provide a high degree of assurance that processing conditions are within administrative and procedural nuclear safety controls. An enhanced procedure management system aimed at making improvements in the quality, safety, and conduct of operation was implemented for Nuclear Safety Sample (NSS) receipt, analysis, and reporting. All procedures with nuclear safety implications were reviewed for accuracy and adequate detail to perform the analytical measurements safely, efficiently, and with the utmost quality. Laboratory personnel worked in a ''Deliberate Operating'' mode (a systematic process requiring continuous expert oversight during all phases of training, testing, and implementation) to initiate the upgrades. Thus, the effort to revise and review nuclear safety sample procedures involved a team comprised of a supervisor, chemist, and two technicians for each procedure. Each NSS procedure was upgraded to a ''Use Every Time'' (UET) procedure with sign-off steps to ensure compliance with each step for every nuclear safety sample analyzed. The upgrade program met and exceeded both the long and short term customer needs by improving measurement reliability, providing objective evidence of rigid adherence to program principles and requirements, and enhancing the system for independent verification of representative sampling from designated NCS points

  4. The EU Vs. Russia: Legal Nature and Implementation of the Union’s Restrictive Measures

    Directory of Open Access Journals (Sweden)

    Voinikov Vadim

    2015-03-01

    Full Text Available The author proposes his take on the EU sanctions against Russia. He aims to understand the legal nature of the EU restrictions, the exact procedure of their implementation, revision, and repeal, as well as their judicial review. To this end, he proposes a system of sanction classification, analyses current EU legislation on the imposition and implementation of sanctions, as well as the case law on the sanction policy. The author also examines EU sanctions imposed on other countries and compares them to the Russian ones. He thus comes up with the following classification of sanctions against Russia: individual sanctions, those targeted at Crimea and Sevastopol, and anti-Russian economic sanctions. He concludes that the EU sanctions against Russia are inconsistent with the legal nature of restrictive measures, since they are a punishment rather than a policy tool. The author believes that in the current political conditions it may be difficult for the European Union to reach a unanimous agreement to repeal or prolong the sanctions. This article is inspired by the discussions that took place during the international conference “Russia and the EU: the Question of Trust” held in Luxembourg on November, 28—29 (2014.

  5. Interdisciplinary Priorities for Dissemination, Implementation, and Improvement Science: Frameworks, Mechanics, and Measures.

    Science.gov (United States)

    Brunner, Julian W; Sankaré, Ibrahima C; Kahn, Katherine L

    2015-12-01

    Much of dissemination, implementation, and improvement (DII) science is conducted by social scientists, healthcare practitioners, and biomedical researchers. While each of these groups has its own venues for sharing methods and findings, forums that bring together the diverse DII science workforce provide important opportunities for cross-disciplinary collaboration and learning. In particular, such forums are uniquely positioned to foster the sharing of three important components of research. First: they allow the sharing of conceptual frameworks for DII science that focus on the use and spread of innovations. Second: they provide an opportunity to share strategies for initiating and governing DII research, including approaches for eliciting and incorporating the research priorities of patients, study participants, and healthcare practitioners, and decision-makers. Third: they allow the sharing of outcome measures well-suited to the goals of DII science, thereby helping to validate these outcomes in diverse contexts, improving the comparability of findings across settings, and elevating the study of the implementation process itself. © 2015 Wiley Periodicals, Inc.

  6. Evaluation of the implementation of radiation protection measures for aircrew in EU member states

    International Nuclear Information System (INIS)

    Thierfeldt, S.; Haider, C.; Hans, P.; Kaleve, M.; Neuenfeldt, F.

    2009-01-01

    An evaluation of the implementation of radiation protection measures for aircrew in EU Member States has recently been performed in a study sponsored by the European Commission. A comprehensive database has been gathered using questionnaires for civil aviation authorities, aircraft operators and radiation protection authorities in each country. The study has revealed the following results: all countries within the scope of this study where aircrew might receive annual doses >1 mSv have implemented appropriate legislation. The treatment of limits or constraints (action levels) for annual doses of 1, 6, 20 mSv could be an area where clear guidance by the European Commission might be needed. The way in which doses are determined might also be treated in a more harmonised way in the EU, including the transfer of dose data of freelancers or crew members working for other airlines. The establishment of the European Aviation Safety Agency leads to a gradual shift in responsibilities from the national civil aviation authorities towards this centralised European agency. Currently, however, tracking of doses for aircrew still lies with national bodies. (authors)

  7. Implementation of generalized quantum measurements: Superadditive quantum coding, accessible information extraction, and classical capacity limit

    International Nuclear Information System (INIS)

    Takeoka, Masahiro; Fujiwara, Mikio; Mizuno, Jun; Sasaki, Masahide

    2004-01-01

    Quantum-information theory predicts that when the transmission resource is doubled in quantum channels, the amount of information transmitted can be increased more than twice by quantum-channel coding technique, whereas the increase is at most twice in classical information theory. This remarkable feature, the superadditive quantum-coding gain, can be implemented by appropriate choices of code words and corresponding quantum decoding which requires a collective quantum measurement. Recently, an experimental demonstration was reported [M. Fujiwara et al., Phys. Rev. Lett. 90, 167906 (2003)]. The purpose of this paper is to describe our experiment in detail. Particularly, a design strategy of quantum-collective decoding in physical quantum circuits is emphasized. We also address the practical implication of the gain on communication performance by introducing the quantum-classical hybrid coding scheme. We show how the superadditive quantum-coding gain, even in a small code length, can boost the communication performance of conventional coding techniques

  8. Problems in implementing some of the new measurement unit definitions of the SI

    Science.gov (United States)

    Pavese, Franco

    2013-09-01

    The paper illustrates and discusses some problems that should be taken into account, should the proposed use of fundamental constants in the definition of measurement units of the SI be implemented: (a) more base units being multi-dimensional, instead of fixing the present problems in this respect; (b) the multidimensionality in the definitions; (c) the use of CODATA adjusted values of the constants for this specific purpose; (d) formal issues in stipulating algebraic expressions of the definitions, and in respect to the rounding or truncation of the numerical values in their transformation from uncertain to exact values; (e) formal issues with the use of the integer number NA; (f) limitations that can arise from the stipulation of the values of several constants for the CODATA Task Group to continue performing in future meaningful least squares adjustments of the fundamental constants taking into account future data.

  9. [IMPLEMENTATION OF MEASURES FOR OCCUPATIONAL HYGIENE AT ENTERPRISES OF BREWING INDUSTRY].

    Science.gov (United States)

    Agafonov, G V; Novikova, L V; Chusova, A E

    2015-01-01

    In the paper there are considered the legal basics of the occupational hygiene of brewing production: acts, bylaws and normative legal acts. There are characterized types of supervision and control (state, departmental, public) implementing the abidance of the sanitary legislation at the enterprises of the brewing industry. There are presented sanitary and hygienic requirements to the enterprises of the brewing industry. There are designated measures of occupational hygiene of brewing production: a sink, cleaning--removal of various pollutions, and also disinfection--process of the decline in quantity of microorganisms to safe level. There are considered some characteristics of pollutions which are subject to removal at various stages ofproduction of beer and stages of sanitary processing of brewing systems according to chemical properties of substances.

  10. [Implementation of functional autonomy measurement system: barriers and facilitators in PISE-Dordogne project].

    Science.gov (United States)

    Gervais, Pauline; Hébert, Réjean; Lamontagne, Julie; Tousignant, Michel

    2011-12-01

    The objectives of the study were to identify the adjustments made during the implantation and the conditions favouring or limiting the SMAF utilisation. A multiqualitative quote was developed. The Functional autonomy measurement system (SMAF) was implanted in 11 French medico-social establishments. Analyses were made with the mixed type thematic method from Miles and Huberman. Principal adjustments that have been made during implantation concern the informatics assistance and clinical support. Strategic, organizational and individual factors explained adhesion level of actors and the subsequent flow of implantation. Establishment of SMAF and of the software eSMAF® in the medico-social establishments rests on a certain number of conditions which could be identified during the study. These conditions made it possible to work out structured recommendations for future implementations.

  11. Problems in implementing some of the new measurement unit definitions of the SI

    International Nuclear Information System (INIS)

    Pavese, Franco

    2013-01-01

    The paper illustrates and discusses some problems that should be taken into account, should the proposed use of fundamental constants in the definition of measurement units of the SI be implemented: (a) more base units being multi-dimensional, instead of fixing the present problems in this respect; (b) the multidimensionality in the definitions; (c) the use of CODATA adjusted values of the constants for this specific purpose; (d) formal issues in stipulating algebraic expressions of the definitions, and in respect to the rounding or truncation of the numerical values in their transformation from uncertain to exact values; (e) formal issues with the use of the integer number N A ; (f) limitations that can arise from the stipulation of the values of several constants for the CODATA Task Group to continue performing in future meaningful least squares adjustments of the fundamental constants taking into account future data

  12. Design and implementation of a device for measuring radiation energy of an electron accelerator

    International Nuclear Information System (INIS)

    Salhi, Heythem; Selmi, Samir

    2010-01-01

    Our work is part of a graduation project at the School of Technology and Computing, to obtain a master's degree in electrical engineering specialty industrial computer. Throughout the four-month internship at the National Center for Nuclear Science and Technology (CNSTN), we have learned to practice the knowledge acquired during the formative years and to manage our working time. Our job was to design and implementation of a device for measuring the energy of radiation. Our project meets the needs of users in the radio treatment Unit, which amount to automate measurement of radiation energy from the electron accelerator. This project has been beneficial on several levels: it was an opportunity to achieve better control of printed circuits, especially when they are dual layer and learning a new programming language that is actually BASIC. In human terms, this work has given us the opportunity to learn to manage our time, and learn teamwork. However, we are convinced that this project can be enhanced on various levels. It can be considered as a starting point of a contribution to the real-time measurement of the energy of radiation.

  13. The trend on legislation of physical protection law and the effective measures for its implementation

    International Nuclear Information System (INIS)

    Lee, J. W.

    2002-01-01

    As a part of strengthening the international regime of physical protection, the 'Legal and Technical Experts Meeting' to prepare a draft amendment of the Convention on the Physical Protection of Nuclear Material(INFCIRC/274/Rev.1) has been held under the auspices of IAEA Secretariat, based on the results of about two-year discussion related to its amendment among the Member States. In addition, terrorism of last September in the United States has made the amendment work of the Convention speed up to quickly cope with the real threat of nuclear facility, and the Diplomatic Conference for its amendment would be held at the end of this year. In order to meet these international strengthening trends and to prepare the measures against radiological emergency with the re-establishment of domestic protection system, Korean government has currently pursued to establish a comprehensive 'law for Physical Protection and Measures against Radiological Emergency' This paper suggests the consideration on domestic status of the legal system, the trend of its legislation and the effective measures for its implementation, to efficiently maintain domestic system of physical protection

  14. Presentation of a quality organisation pattern for the design, manufacturing and implementation of complex measuring chains

    International Nuclear Information System (INIS)

    Hervault, V.; Piguet, M.

    1995-01-01

    The EFMT (Experience Feedback, Measures-Tests) branch of EDF Research and Development Division designs and installs instrumentation systems for power generation sites. These systems include either testing (thermal and mechanical operation surveys) or process control instruments. The context in which instrumentation is developed and used has much varied during the past few years from both technical and organisational viewpoint. An instrumentation system consists of a set of measuring chains associated to communication supports and an acquisition software; the technical knowledge involved are highly diversified: measurement, field bus, computing, data processing... Customers now include quality requirements in their specifications and often make reference to standards of the EN 29000 series. The EFMT Branch has defined a quality approach applicable to instrumentation field which aims at ensuring the technical success (namely to attain the expected characteristics) and meeting customers' quality requirements. This approach based upon project management techniques defines the design implementation and operating process phases. It emphasizes a global approach to instrumentation while promoting the communication between the partners in a project. This paper presents the whole approach and underlines its critical phases: users' requirements, testing and acceptance procedures. (authors). 5 refs., 2 figs., 1 tab

  15. Structural observation of long-span suspension bridges for safety assessment: implementation of an optical displacement measurement system

    International Nuclear Information System (INIS)

    Martins, L Lages; Ribeiro, A Silva; Rebordão, J M

    2015-01-01

    This paper addresses the implementation of an optical displacement measurement system in the observation scenario of a long-span suspension bridge and its contribution for structural safety assessment. The metrological background required for quality assurance of the measurements is described, namely, the system's intrinsic parameterization and integration in the SI dimensional traceability chain by calibration, including its measurement uncertainty assessment

  16. Measuring organizational flexibility in community pharmacy: Building the capacity to implement cognitive pharmaceutical services.

    Science.gov (United States)

    Feletto, Eleonora; Wilson, Laura Kate; Roberts, Alison Sarah; Benrimoj, Shalom Isaac

    2011-03-01

    Community pharmacy is undergoing transformation with increasing pressure to build its capacity to deliver cognitive pharmaceutical services ("services"). The theoretical framework of organizational flexibility (OF) may be used to assess the capacity of community pharmacy to implement change programs and guide capacity-building initiatives. To test the applicability of an existing scale measuring OF to the industry of community pharmacy in Australia. A mail survey was used to test a preexisting scale measuring OF amended from 28 items to 20 items testing 3 underlying factors of operational, structural, and strategic flexibility in the Australian community pharmacy context. The sample was 2006 randomly-stratified community pharmacies. A confirmatory factor analysis was conducted to assess the validity and reliability of the 1-factor models for each underlying construct and the full measurement model. Responses were received from a total of 395 (19.7%) community pharmacies. The 1-factor models of operational, structural, and strategic flexibility fit the data with appropriate respecification. Overall, the favorable fit of the individual factor constructs suggested that the multiple-factor measurement model should be tested. However, this model did not yield an interpretable response. Operational flexibility covaried negatively to the other factors, whereas structural and strategic flexibility shared covariance. Despite this, the results highlighting the individual factor fit suggest the constructs have application to pharmacy. The individual OF constructs were useful in the development and initial testing of a scale adapted for community pharmacy. When further developed and validated, the scale could be used to identify group of pharmacies that require individualized assistance to build capacity and integrate services and other new endeavors. Copyright © 2011 Elsevier Inc. All rights reserved.

  17. Implementation outcome assessment instruments used in physical healthcare settings and their measurement properties: a systematic review protocol

    Science.gov (United States)

    Vitoratou, Silia; Sevdalis, Nick; Hull, Louise

    2017-01-01

    Introduction Over the past 10 years, research into methods that promote the uptake, implementation and sustainability of evidence-based interventions has gathered pace. However, implementation outcomes are defined in different ways and assessed by different measures; the extent to which these measures are valid and reliable is unknown. The aim of this systematic review is to identify and appraise studies that assess the measurement properties of quantitative implementation outcome instruments used in physical healthcare settings, to advance the use of precise and accurate measures. Methods and analysis The following databases will be searched from inception to March 2017: MEDLINE, EMBASE, PsycINFO, CINAHL and the Cochrane Library. Grey literature will be sought via HMIC, OpenGrey, ProQuest for theses and Web of Science Conference Proceedings Citation Index-Science. Reference lists of included studies and relevant reviews will be hand searched. Three search strings will be combined to identify eligible studies: (1) implementation literature, (2) implementation outcomes and (3) measurement properties. Screening of titles, abstracts and full papers will be assessed for eligibility by two reviewers independently and any discrepancies resolved via consensus with the wider team. The methodological quality of the studies will be assessed using the COnsensus-based Standards for the selection of health Measurement INstruments checklist. A set of bespoke criteria to determine the quality of the instruments will be used, and the relationship between instrument usability and quality will be explored. Ethics and dissemination Ethical approval is not necessary for systematic review protocols. Researchers and healthcare professionals can use the findings of this systematic review to guide the selection of implementation outcomes instruments, based on their psychometric quality, to assess the impact of their implementation efforts. The findings will also provide a useful guide for

  18. Implementation of Energy Strategies in Communities (Annex 63) Volume 3: Application of Strategic Measures

    DEFF Research Database (Denmark)

    Quitzau, Maj-Britt; Hoffmann, Birgitte; Petersen, Jens-Phillip

    This report describes, for different scales (city, district and project level) and for 29 conceptualised case studies, how implementation champions can apply the strategic measues from Volume 2. Implementation champions are hereby understood as stakeholders in the city who take the initiative...... to lead and facilitate implementation processes....

  19. Nuclear Security Systems and Measures for Major Public Events. Implementing Guide

    International Nuclear Information System (INIS)

    2012-01-01

    severe consequences, depending upon the nature and quantity of the specific material involved, the mode of dispersal (violent or non-violent), the location and the population impacted. Implementing nuclear security systems and measures is, therefore, of paramount importance. This Implementing Guide may be useful to the organizers of major public events. It represents a sound basis, drawn from experience, for raising awareness about nuclear security systems and the measures to be applied for such events.

  20. Nuclear Security Systems and Measures for Major Public Events. Implementing Guide (Russian Edition)

    International Nuclear Information System (INIS)

    2014-01-01

    severe consequences, depending upon the nature and quantity of the specific material involved, the mode of dispersal (violent or non-violent), the location and the population impacted. Implementing nuclear security systems and measures is, therefore, of paramount importance. This Implementing Guide may be useful to the organizers of major public events. It represents a sound basis, drawn from experience, for raising awareness about nuclear security systems and the measures to be applied for such events

  1. Natural Water Retention Measures (NWRM): from Design to Implementation through European Projects

    International Nuclear Information System (INIS)

    Magdaleno Mas, F.; Dalacamara Andres, G.

    2015-01-01

    The Centre for Applied Technique Studies (CETA) of CEDEX has been working over the last few years in different European projects related with the design and development of natural water retention measures (NWRM). These are a number of measures, boosted by the Water Unit of the Environment Directorate-General of the European Commission. with close links to green infrastructures, which try to integrate, from a multifunctional approach, different legal and technical requirements aimed at a better adaptation to extreme hydro meteorological events, environmental protection and conservation, and maintenance of ecosystem services. This paper reviews the underpinning foundations of the concept and the mechanisms for designing and implementing NWRM. It also shows the way they can be applied, by presenting different initiatives developed by CETA since 2008 in Navarra (Arga-Aragon rivers system). For fulfilling those works, CETA has collaborated with environmental and hydraulic authorities of Navarra. It has also actively cooperated with research centres, such as the Institute IMDEA Water. specifically in a European project devoted to the diffusion, assessment, and presentation of NWRM within the context of the EU River Basin Districts. (Author)

  2. Design and implementation of an x-ray strain measurement capability using a rotating anode machine

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, J.A.; Rangaswamy, P.; Lujan, M. Jr.; Bourke, M.A.M.

    1998-12-31

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Residual stresses close to the surface can improve the reliability and lifetime of parts for technological applications. X-ray diffraction plays a significant role in gaining an exact knowledge of the stresses at the surface and their depth distribution. An x-ray capability at Los Alamos is key to developing and maintaining industrial collaborations in strain effects. To achieve this goal, the authors implemented a residual strain measuring station on the rotating anode x-ray instrument at the Lujan Center. This capability has been used to investigate residual strains in heat treated automotive components, machining effects on titanium alloys, resistance welded steel joints, titanium matrix fiber reinforced composites, ceramic matrix composites, thin films, and ceramic coatings. The overall objective is to combine both x-ray and neutron diffraction measurements with numerical models (e.g., finite element calculations).

  3. Risk Informed Approach for Nuclear Security Measures for Nuclear and Other Radioactive Material out of Regulatory Control. Implementing Guide

    International Nuclear Information System (INIS)

    2015-01-01

    This publication provides guidance to States for developing a risk informed approach and for conducting threat and risk assessments as the basis for the design and implementation of sustainable nuclear security systems and measures for prevention of, detection of, and response to criminal and intentional unauthorised acts involving nuclear and other radioactive material out of regulatory control. It describes concepts and methodologies for a risk informed approach, including identification and assessment of threats, targets, and potential consequences; threat and risk assessment methodologies, and the use of risk informed approaches as the basis for informing the development and implementation of nuclear security systems and measures. The publication is an Implementing Guide within the IAEA Nuclear Security Series and is intended for use by national policy makers, law enforcement agencies and experts from competent authorities and other relevant organizations involved in the establishment, implementation, maintenance or sustainability of nuclear security systems and measures related to nuclear and other radioactive material out of regulatory control

  4. Toward criteria for pragmatic measurement in implementation research and practice: a stakeholder-driven approach using concept mapping.

    Science.gov (United States)

    Powell, Byron J; Stanick, Cameo F; Halko, Heather M; Dorsey, Caitlin N; Weiner, Bryan J; Barwick, Melanie A; Damschroder, Laura J; Wensing, Michel; Wolfenden, Luke; Lewis, Cara C

    2017-10-03

    Advancing implementation research and practice requires valid and reliable measures of implementation determinants, mechanisms, processes, strategies, and outcomes. However, researchers and implementation stakeholders are unlikely to use measures if they are not also pragmatic. The purpose of this study was to establish a stakeholder-driven conceptualization of the domains that comprise the pragmatic measure construct. It built upon a systematic review of the literature and semi-structured stakeholder interviews that generated 47 criteria for pragmatic measures, and aimed to further refine that set of criteria by identifying conceptually distinct categories of the pragmatic measure construct and providing quantitative ratings of the criteria's clarity and importance. Twenty-four stakeholders with expertise in implementation practice completed a concept mapping activity wherein they organized the initial list of 47 criteria into conceptually distinct categories and rated their clarity and importance. Multidimensional scaling, hierarchical cluster analysis, and descriptive statistics were used to analyze the data. The 47 criteria were meaningfully grouped into four distinct categories: (1) acceptable, (2) compatible, (3) easy, and (4) useful. Average ratings of clarity and importance at the category and individual criteria level will be presented. This study advances the field of implementation science and practice by providing clear and conceptually distinct domains of the pragmatic measure construct. Next steps will include a Delphi process to develop consensus on the most important criteria and the development of quantifiable pragmatic rating criteria that can be used to assess measures.

  5. Implementing patient-reported outcome measures in palliative care clinical practice: a systematic review of facilitators and barriers.

    Science.gov (United States)

    Antunes, Bárbara; Harding, Richard; Higginson, Irene J

    2014-02-01

    Many patient-reported outcome measures have been developed in the past two decades, playing an increasingly important role in palliative care. However, their routine use in practice has been slow and difficult to implement. To systematically identify facilitators and barriers to the implementation of patient-reported outcome measures in different palliative care settings for routine practice, and to generate evidence-based recommendations, to inform the implementation process in clinical practice. Systematic literature review and narrative synthesis. Medline, PsycInfo, Cumulative Index to Nursing and Allied Health Literature, Embase and British Nursing Index were systematically searched from 1985. Hand searching of reference lists for all included articles and relevant review articles was performed. A total of 3863 articles were screened. Of these, 31 articles met the inclusion criteria. First, data were integrated in the main themes: facilitators, barriers and lessons learned. Second, each main theme was grouped into either five or six categories. Finally, recommendations for implementation on outcome measures at management, health-care professional and patient levels were generated for three different points in time: preparation, implementation and assessment/improvement. Successful implementation of patient-reported outcome measures should be tailored by identifying and addressing potential barriers according to setting. Having a coordinator throughout the implementation process seems to be key. Ongoing cognitive and emotional processes of each individual should be taken into consideration during changes. The educational component prior to the implementation is crucial. This could promote ownership and correct use of the measure by clinicians, potentially improving practice and the quality of care provided through patient-reported outcome measure data use in clinical decision-making.

  6. Analysis of policy options and implementation measures promoting electricity from renewable biomass in the EU

    International Nuclear Information System (INIS)

    Kautto, N.

    2005-04-01

    Biomass as a renewable energy source holds a great potential in responding to energy challenges of the future as well as meeting renewable energy targets set by the European Union. The objective of this study was to analyse various policy options and implementation measures promoting electricity from renewable biomass in the European Union, including new Member States (EU-25). The main political driving force behind this investigation was the RES-E Directive (2001/77/EC). The effectiveness of policy instruments regarding the development of electricity from biomass and biogas in the period of 1990-2002, and the framework conditions, i.e. success and risk factors, for this progress were assessed though a 'five-step approach'. Past development in terms of bioelectricity production and generating capacity was assessed based on statistics of Eurostat and the IEA. Policy instruments promoting bioelectricity and the framework factors on the national level in each EU Member State (excluding Cyprus and Malta) were investigated using the EU and governmental documents, independent evaluations and expert contacts as information sources. It became clear that determination of the effectiveness of policy instruments cannot be separated from the environment these mechanisms are applied to: mapping of the frame conditions for development is essential. Instead of selecting distinct policy instruments, successful Member State/bioelectricity combinations were chosen. The most successful combinations were found to be Germany, United Kingdom, Spain and Finland, whereas examples of unsuccessful measures were found in Greece, Luxembourg and the new Member States. Bioelectricity has clearly benefited from feed-in tariff system in countries like Germany but the use of biomass has essentially increased even without this measure in Sweden and Finland, where favourable taxation and strong links between forestry and power industries are defining factors for positive development. This study

  7. Lean Six-Sigma in Aviation Safety: An implementation guide for measuring aviation system’s safety performance

    OpenAIRE

    Panagopoulos, I.; Atkin, C.J.; Sikora, I.

    2016-01-01

    The paper introduces a conceptual framework that could improve the safety performance measurement process and ultimately the aviation system safety performance. The framework provides an implementation guide on how organisations could design and develop a proactive, measurement tool for assessing and measuring the Acceptable Level of Safety Performance (ALoSP) at sigma (σ) level, a statistical measurement unit. In fact, the methodology adapts and combines quality management tools, a leading i...

  8. Measuring sustainable development: the promise and difficulties of implementing Inclusive Wealth in the Goulburn-Broken Catchment, Australia

    OpenAIRE

    Leonie J. Pearson; Reinette Biggs; Michael Harris; Brian Walker

    2013-01-01

    A difficulty in measuring sustainable development is integrating measures of its key components (environment, economic, and social) in a way that allows comparison and assessment of tradeoffs and communication of results. This article presents a trial implementation of a sustainability measure called Inclusive Wealth. We do this by constructing an experimental model to estimate sustainable development through the measurement of capital stocks (built, human, natural, and resilience) in the Gou...

  9. Evaluating 90Sr and 137Cs accumulation by structural elements of exclusion zone's vegetative communities of meadow and lea land

    International Nuclear Information System (INIS)

    Paskevich, S.A.; Petrov, M.F.

    2003-01-01

    Biogenic carry-over of 90 Sr and 137 Cs by structural elements of exclusion zone's meadows and lea land phytocenosis is considered. Quantitative parameters of radionuclide accumulation are evaluated in substrate and live biomass of communities growing under various ecological conditions. It was stated that accumulation levels for ground biomass of communities depends, at a significant rate, on landscape growing conditions. These values fluctuate within the range of around 100 times. For 90 Sr, significantly lower difference in carry-over values was observed totaling up to 5 times, although for single community, this radionuclide carry-over exceeds essentially 137 Cs carry-over

  10. HENRY CHARLES LEA Y SU RED DE COLABORADORES LATINOAMERICANOS: RAZONES PARA ESTUDIAR EL SANTO OFICIO EN LA SEGUNDA MITAD DEL SIGLO XIX

    Directory of Open Access Journals (Sweden)

    Doris Moreno

    2013-12-01

    Full Text Available Se aborda en este artículo la vida y pensamiento de Henry Charles Lea en relación a sus estudios sobre la historia de la Inquisición española. Se esboza brevemente la red de colaboradores que Lea estableció en toda Latinoamérica así como su perfil político e intelectual, subrayando su importancia para la escritura de la obra The Inquisition in the Spanish Dependencies (1908. Finalmente, se plantean los motivos que llevaron a estos intelectuales a colaborar intensamente con el historiador norteamericano en el marco de los procesos de construcción de identidades sociales y políticas en Latinoamérica en la segunda mitad del siglo XIX. Se toma como eje conductor de este planteamiento la correspondencia de Juan María Gutiérrez con Henry Charles Lea.

  11. Workshop proceedings of ISAMM 2009: Implementation of severe accident management measures

    International Nuclear Information System (INIS)

    Guentay, S.

    2010-10-01

    This comprehensive report published by the Paul Scherrer Institute (PSI) in Switzerland reports on a conference and workshop held in Switzerland in October 2009 dealing with Severe Accidents Management (SAM) in nuclear power stations. The workshop provided an update on the status of severe accident management measures and their implications since the OECD/CSNI workshop held in 2001 at the PSI in Switzerland. Since the 2001 workshop, additional work has been performed to integrate emergency procedures and SAM measures into risk assessments in order to better reflect operator responses to recover a plant from a damaged state. The major focus of the workshop was to address SAM measures for both operational plants and new plant designs. Also, the integration of SAM measures into contemporary/future probabilistic risk assessments was discussed. 41 papers were presented in 8 sessions. The papers addressed the following areas: 1) Current status and insights of SAM (2 sessions); 2) Probabilistic Safety Assessment (PSA) modelling issues; 3) code analysis for supporting Serious Accident Management Guidance (SAMG, 2 sessions); 4) decision making, tools, training, risk-targets and entrance to SAM; 5) design modifications for implementation of SAM; 6) physical phenomena. The last part of the workshop was devoted to the presentation of the most striking highlights of the papers in the above areas, followed by two panellists giving presentations on human and organisational aspects of SAM, their importance in relation to technical issues and the effectiveness of current SAMG implementation. The question of how consequence analyses can be used to improve the effectiveness of SAM is discussed. The contributions were presented by representatives from Austria, Germany, Japan, France, the USA, Korea, Switzerland, Finland, Hungary, Belgium, Canada, Sweden, the Czech republic, the United kingdom, the Netherlands, Spain, Slovenia and Russia. The authors state that the overall picture

  12. Workshop proceedings of ISAMM 2009: Implementation of severe accident management measures

    Energy Technology Data Exchange (ETDEWEB)

    Guentay, S. (ed.) [Paul Scherrer Institute (PSI), Nuclear Energy and Safety Research Department, Laboratory for Thermal Hydraulics, ViIligen (Switzerland)

    2010-10-15

    This comprehensive report published by the Paul Scherrer Institute (PSI) in Switzerland reports on a conference and workshop held in Switzerland in October 2009 dealing with Severe Accidents Management (SAM) in nuclear power stations. The workshop provided an update on the status of severe accident management measures and their implications since the OECD/CSNI workshop held in 2001 at the PSI in Switzerland. Since the 2001 workshop, additional work has been performed to integrate emergency procedures and SAM measures into risk assessments in order to better reflect operator responses to recover a plant from a damaged state. The major focus of the workshop was to address SAM measures for both operational plants and new plant designs. Also, the integration of SAM measures into contemporary/future probabilistic risk assessments was discussed. 41 papers were presented in 8 sessions. The papers addressed the following areas: 1) Current status and insights of SAM (2 sessions); 2) Probabilistic Safety Assessment (PSA) modelling issues; 3) code analysis for supporting Serious Accident Management Guidance (SAMG, 2 sessions); 4) decision making, tools, training, risk-targets and entrance to SAM; 5) design modifications for implementation of SAM; 6) physical phenomena. The last part of the workshop was devoted to the presentation of the most striking highlights of the papers in the above areas, followed by two panellists giving presentations on human and organisational aspects of SAM, their importance in relation to technical issues and the effectiveness of current SAMG implementation. The question of how consequence analyses can be used to improve the effectiveness of SAM is discussed. The contributions were presented by representatives from Austria, Germany, Japan, France, the USA, Korea, Switzerland, Finland, Hungary, Belgium, Canada, Sweden, the Czech republic, the United kingdom, the Netherlands, Spain, Slovenia and Russia. The authors state that the overall picture

  13. Alternative Student Growth Measures for Teacher Evaluation: Implementation Experiences of Early-Adopting Districts. REL 2015-093

    Science.gov (United States)

    McCullough, Moira; English, Brittany; Angus, Megan Hague; Gill, Brian

    2015-01-01

    Alternative student growth measures for teacher evaluation: Implementation experiences of early-adopting districts: State requirements to include student achievement growth in teacher evaluations are prompting the development of alternative ways to measure growth in grades and subjects not covered by state assessments. These alternative growth…

  14. Problems in the implementation of energy conservation measures. II. Consumer motivation

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, P. H.

    1977-10-15

    During the course of 1975 a national survey of household attitudes to energy use and conservation was undertaken. The study suggested that while the public are generally in favor of energy conservation, they do not practice it. The study highlighted the need to do more than merely raise the level of awareness of the need for energy conservation. The energy intensive nature of our life-style was identified as a critical constraint on the implementations of effective voluntary energy conservation programs. It was suggested that our pattern of energy use is so deeply embedded in our everyday behaviors that it would take more than the presentation of information to produce the necessary changes in behavior. Some of the problems involved in attempting to motivate the consumer to conserve energy using either an extrinsic or instrinsic motivational approach are explored. A general model of the energy system is employed to illustrate that changes in the informational environment must be accompanied by changes in the institutional environment if pro-conservation attitudes are to be converted into conserving behavior. The case of personal transportation is used to indicate the need for a comprehensive package of measures which not only motivate the consumer but also facilitate and reinforce positive behavior if the dual goals of satisfying personal mobility needs and energy conservation are to be satisfied.

  15. Implementation of new legislative measures on industrial risks prevention and control in urban areas

    International Nuclear Information System (INIS)

    Cahen, Bruno

    2006-01-01

    Incompatible at first sight, but vital to each other, the industry and the city have been developing a complex relationship for decades. From 1810 on in France, risk prevention and control in and around major industrial sites evolves step-by-step, learning from accidents. Land-use planning in the vicinity of SEVESO establishments becomes one of the key policies in the prevention of major industrial accident hazard on European level in 1996, focussing on historical situation of concern [M.D. Christou, S. Porter, Guidance on Land-use Planning as required by the Council Directive 96/82/EC. Joint Research Centre, European Commission, 1999]. The Toulouse (F) accidents, on 21 September 2001 evidenced the need for new tools to reinforce protective action and ease the situation of clusters of factories engulfed in the urban setting. In France, new legislative measures adopted on 30 July 2003 deeply modified the approach to land-use planning around the main dangerous facilities (622 establishments). The implementation of technological risk prevention plans [Fr. 'PPRT'] will limit the exposition of the population to the consequences of accidents. These plans, derived from the risk assessment (safety reports) produced by the operators of the hazardous facilities, will delineate areas within which requirements can be imposed on existing and future buildings and within which future building rights may be restricted. On the grounds of extremely serious danger that threatens human life, pre-existing constructions may be progressively expropriated. The financing of the corresponding measures, estimated a rough -bar 2-4 billions, will be defined by agreements among the Central Government, the industrial company and the local and regional bodies

  16. The measurement and effect of implementation fidelity in the multi component smoking intervention: The X:IT study

    DEFF Research Database (Denmark)

    Bast, Lotus Sofie

    2016-01-01

    -based smoking prevention programs have been launched over the past three decades, and generally multi component initiatives are recommended. The effects have been inconclusive, though, which may partly be due to lack of implementation, but little evidence exists on the implementation of school-based smoking....... Methods: My three papers were based on the school-randomized X:IT study, which tested a multi component intervention to prevent smoking among adolescents in 94 Danish elementary schools (51 intervention and 43 control schools). Participants were grade 7 pupils (mean age: 12.5 years). We collected data......Title: The measurement and effect of implementation fidelity in the multi component smoking intervention: The X:IT study Background: Careful measurement of implementation fidelity is crucial in the examination of whether an intervention worked as intended or not. A large number of school...

  17. Distributed Leadership and Organizational Change: Implementation of a Teaching Performance Measure

    Science.gov (United States)

    Sloan, Tine

    2013-01-01

    This article explores leadership practice and change as evidenced in multiple data sources gathered during a self-study implementation of a teaching performance assessment. It offers promising models of distributed leadership and organizational change that can inform future program implementers and the field in general. Our experiences suggest…

  18. Evaluation of Low-Cost Mitigation Measures Implemented to Improve Air Quality in Nursery and Primary Schools

    Directory of Open Access Journals (Sweden)

    Juliana P. Sá

    2017-05-01

    Full Text Available Indoor air pollution mitigation measures are highly important due to the associated health impacts, especially on children, a risk group that spends significant time indoors. Thus, the main goal of the work here reported was the evaluation of mitigation measures implemented in nursery and primary schools to improve air quality. Continuous measurements of CO2, CO, NO2, O3, CH2O, total volatile organic compounds (VOC, PM1, PM2.5, PM10, Total Suspended Particles (TSP and radon, as well as temperature and relative humidity were performed in two campaigns, before and after the implementation of low-cost mitigation measures. Evaluation of those mitigation measures was performed through the comparison of the concentrations measured in both campaigns. Exceedances to the values set by the national legislation and World Health Organization (WHO were found for PM2.5, PM10, CO2 and CH2O during both indoor air quality campaigns. Temperature and relative humidity values were also above the ranges recommended by American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE. In general, pollutant concentrations measured after the implementation of low-cost mitigation measures were significantly lower, mainly for CO2. However, mitigation measures were not always sufficient to decrease the pollutants’ concentrations till values considered safe to protect human health.

  19. Evaluation of Low-Cost Mitigation Measures Implemented to Improve Air Quality in Nursery and Primary Schools.

    Science.gov (United States)

    Sá, Juliana P; Branco, Pedro T B S; Alvim-Ferraz, Maria C M; Martins, Fernando G; Sousa, Sofia I V

    2017-05-31

    Indoor air pollution mitigation measures are highly important due to the associated health impacts, especially on children, a risk group that spends significant time indoors. Thus, the main goal of the work here reported was the evaluation of mitigation measures implemented in nursery and primary schools to improve air quality. Continuous measurements of CO₂, CO, NO₂, O₃, CH₂O, total volatile organic compounds (VOC), PM₁, PM 2.5 , PM 10 , Total Suspended Particles (TSP) and radon, as well as temperature and relative humidity were performed in two campaigns, before and after the implementation of low-cost mitigation measures. Evaluation of those mitigation measures was performed through the comparison of the concentrations measured in both campaigns. Exceedances to the values set by the national legislation and World Health Organization (WHO) were found for PM 2.5 , PM 10 , CO₂ and CH₂O during both indoor air quality campaigns. Temperature and relative humidity values were also above the ranges recommended by American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). In general, pollutant concentrations measured after the implementation of low-cost mitigation measures were significantly lower, mainly for CO₂. However, mitigation measures were not always sufficient to decrease the pollutants' concentrations till values considered safe to protect human health.

  20. Feasibility to implement the radioisotopic method of nasal mucociliary transport measurement getting reliable results

    International Nuclear Information System (INIS)

    Troncoso, M.; Opazo, C.; Quilodran, C.; Lizama, V.

    2002-01-01

    Aim: Our goal was to implement the radioisotopic method to measure the nasal mucociliary velocity of transport (NMVT) in a feasible way in order to make it easily available as well as to validate the accuracy of the results. Such a method is needed when primary ciliary dyskinesia (PCD) is suspected, a disorder characterized for low NMVT, non-specific chronic respiratory symptoms that needs to be confirmed by electronic microscopic cilia biopsy. Methods: We performed one hundred studies from February 2000 until February 2002. Patients aged 2 months to 39 years, mean 9 years. All of them were referred from the Respiratory Disease Department. Ninety had upper or lower respiratory symptoms, ten were healthy controls. The procedure, done be the Nuclear Medicine Technologist, consists to put a 20 μl drop of 99mTc-MAA (0,1 mCi, 4 MBq) behind the head of the inferior turbinate in one nostril using a frontal light, a nasal speculum and a teflon catheter attached to a tuberculin syringe. The drop movement was acquired in a gamma camera-computer system and the velocity was expressed in mm/min. As there is need for the patient not to move during the procedure, sedation has to be used in non-cooperative children. Abnormal NMVT values cases were referred for nasal biopsy. Patients were classified in three groups. Normal controls (NC), PCD confirmed by biopsy (PCDB) and cases with respiratory symptoms without biopsy (RSNB). In all patients with NMVT less than 2.4 mm/min PCD was confirmed by biopsy. There was a clear-cut separation between normal and abnormal values and interestingly even the highest NMVT in PCDB cases was lower than the lowest NMVT in NC. The procedure is not as easy as is generally described in the literature because the operator has to get some skill as well as for the need of sedation in some cases. Conclusion: The procedure gives reliable, reproducible and objective results. It is safe, not expensive and quick in cooperative patients. Although, sometimes

  1. Protocol Implementation for Radon Concentration Measurements in Houses in Croatia - Baranja Case

    International Nuclear Information System (INIS)

    Radolic, V.; Miklavcic, I.; Poje, M.; Stanic, D.; Varga Pajtler, M.; Vukovic, B.

    2011-01-01

    The newly established protocol for radon measurements in homes was implemented on the radon survey in houses of Baranja region which was carried out from July 2009 until July 2010. The radon measurements were performed with passive track etched detectors. The method consists of cylindrical plastic vessel and two strippable LR-115 films type II (Kodak-Path, France). This method with two detector films enables the estimation of equilibrium factor as well.Croatian territory is divided in 10 x 10 km 2 cells which were part of a reference grid map which is used in a preparation of European radon concentration map. Detector locations were randomly chosen inside each grid and their number was determined by the number of inhabitants inside (one locations per 350 inhabitants). Radon detectors were exposed for a year in a living room or a bedroom away from strong ventilation and 30 cm from side walls (usually on closet at height of 2 m). After the exposure, detectors were collected and etched in 10 % NaOH aqueous solution at 50 degrees of C for 180 minutes. The tracks were automatically counted using spark counter AIST-2V. The obtained results were in the range from 6 to 355 Bq m -3 with arithmetic mean of 88 Bq m -3 and standard deviation of 69.0 Bq m -3 . The geometric mean was 67.2 Bq m -3 while the geometric standard deviation was 2.1 Bq m -3 . The statistical χ2 -test showed that the empirical frequency distribution for radon in houses of Baranja region belonged to the log-normal distribution. The percentage of houses with radon concentrations between 200 and 400 Bq m -3 was 6.7% and 1.0% of houses have radon concentration above 400 Bq m -3 . The annual effective dose from the indoor radon and its short-lived progenies for the inhabitants of Baranja region (for the average equilibrium factor of 0.53 and occupancy factor of 0.6) was 1.5 mSv. (author)

  2. An Evaluation and Implementation Guide for Current Groundwater Mass Flux Measurement Practices

    National Research Council Canada - National Science Library

    Wheeldon, III, Jack G

    2008-01-01

    ... capabilities, limitations, and costs. This study provides such information on each of the methods by reviewing implementation practices and comparing the costs of applying the methods at 16 standardized "template" sites...

  3. Implementing a Measurement Feedback System in Community Mental Health Clinics: A Case Study of Multilevel Barriers and Facilitators.

    Science.gov (United States)

    Gleacher, Alissa A; Olin, Serene S; Nadeem, Erum; Pollock, Michele; Ringle, Vanesa; Bickman, Leonard; Douglas, Susan; Hoagwood, Kimberly

    2016-05-01

    Measurement feedback systems (MFSs) have been proposed as a means of improving practice. The present study examined the implementation of a MFS, the Contextualized Feedback System (CFS), in two community-based clinic sites. Significant implementation differences across sites provided a basis for examining factors that influenced clinician uptake of CFS. Following the theoretical implementation framework of Aarons et al. (Adm Policy Mental Health Mental Health Serv Res 38(1):4-23, 2011), we coded qualitative data collected from eighteen clinicians (13 from Clinic U and 5 from Clinic R) who participated in semi-structured interviews about their experience with CFS implementation. Results suggest that clinicians at both clinics perceived more barriers than facilitators to CFS implementation. Interestingly, clinicians at the higher implementing clinic reported a higher proportion of barriers to facilitators (3:1 vs. 2:1); however, these clinicians also reported a significantly higher level of organizational and leadership supports for CFS implementation. Implications of these findings are discussed.

  4. Development and implementation of a PV performance monitoring system based on inverter measurements

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Gavriluta, Anamaria Florina; Maaløe, Lars

    2016-01-01

    Performance monitoring and fault detection systems have become necessary for decreasing operation and maintenance cost in large photovoltaic (PV) plants, as well for maximizing plan yield and lifetime. We expect a similar development for residential and commercial PV system applications, where...... the inverter’s own monitoring and communication capabilities. We also aim to lower the implementation cost, by using a simple, but accurate performance monitoring approach, and show the practical issues that can arise when implementing such a system....

  5. Implementation outcome assessment instruments used in physical healthcare settings and their measurement properties: a systematic review protocol.

    Science.gov (United States)

    Khadjesari, Zarnie; Vitoratou, Silia; Sevdalis, Nick; Hull, Louise

    2017-10-08

    Over the past 10 years, research into methods that promote the uptake, implementation and sustainability of evidence-based interventions has gathered pace. However, implementation outcomes are defined in different ways and assessed by different measures; the extent to which these measures are valid and reliable is unknown. The aim of this systematic review is to identify and appraise studies that assess the measurement properties of quantitative implementation outcome instruments used in physical healthcare settings, to advance the use of precise and accurate measures. The following databases will be searched from inception to March 2017: MEDLINE, EMBASE, PsycINFO, CINAHL and the Cochrane Library. Grey literature will be sought via HMIC, OpenGrey, ProQuest for theses and Web of Science Conference Proceedings Citation Index-Science. Reference lists of included studies and relevant reviews will be hand searched. Three search strings will be combined to identify eligible studies: (1) implementation literature, (2) implementation outcomes and (3) measurement properties. Screening of titles, abstracts and full papers will be assessed for eligibility by two reviewers independently and any discrepancies resolved via consensus with the wider team. The methodological quality of the studies will be assessed using the COnsensus-based Standards for the selection of health Measurement INstruments checklist. A set of bespoke criteria to determine the quality of the instruments will be used, and the relationship between instrument usability and quality will be explored. Ethical approval is not necessary for systematic review protocols. Researchers and healthcare professionals can use the findings of this systematic review to guide the selection of implementation outcomes instruments, based on their psychometric quality, to assess the impact of their implementation efforts. The findings will also provide a useful guide for reviewers of papers and grants to determine the

  6. What prevents organisations from implementing energy saving measures? Case studies of Norwegian public and commercial companies

    Energy Technology Data Exchange (ETDEWEB)

    Saele, Hanne; Naesje, Paal; Hagen, Oeivind [SINTEF Energy Research, Trondheim (Norway); Nordvik, Haavard [E-CO Tech, Oslo (Norway)

    2005-07-01

    The background for this project is analyses conducted in an industrial area with a capacity problem concerning electricity supply. To cope with the problem the network operator, in cooperation with the Norwegian Research Council, executed a project focusing on how to reduce peak loads and energy consumption. Technical and economical analyses of energy efficiency actions were offered to 40 companies and 20 out of these decided to implement the proposed actions. Two years later, 7 out of these 20 companies had not implemented the suggested actions or the starts were delayed. These cases were analysed based on personal interviews. The goal was to study the reasons for not implementing actions or for the delay. Most analyses of this kind analyse successful implementations. Here, however, the research issue is why organizations choose not to implement solutions that make sense, both economically and technically? Results suggest that information overload, bad timing, lack of personal address and formal responsibility for the report hindered companies from using the report as a basis for decision-making. Different aspects of financial management systems, such as rigid routines not allowing means for investments and aversion of less predictable costs, also hindered implementation. Despite these findings several organisations do have interest in energy saving and consumption, personnel that takes responsibility and financial incentives for reducing energy costs. Although the study is based on only a few cases to draw sound conclusions there are indications that, targeting the right organisations, energy efficiency is an interesting alternative to increasing power capacity.

  7. Prótesis total. Una innovación para el registro de trayectorias condíleas en la fase de plancha base y rodetes

    OpenAIRE

    Salsench Cabré, Juan; Samsó Manzanedo, Jorge; Nogueras Bayona, Joaquim

    1993-01-01

    Se hace una revisión bibliográfica del registro de trayectorias condíleas en la construcción de prótesis totales. Se presenta un nuevo método sencillo y eficaz, para su registro en la fase de planchas base y rodetes.

  8. 34 CFR 200.74 - Use of an alternative method to distribute grants to LEAs with fewer than 20,000 total residents.

    Science.gov (United States)

    2010-07-01

    ... LEAs for basic grants, concentration grants, targeted grants, and education finance incentive grants in... TITLE I-IMPROVING THE ACADEMIC ACHIEVEMENT OF THE DISADVANTAGED Improving Basic Programs Operated by... to the Secretary to use an alternative method to distribute basic grant, concentration grant...

  9. Reconciling water harvesting and soil erosion control by thoughtful implementation of SWC measures

    Science.gov (United States)

    Bellin, N.; Vanacker, V.; van Wesemael, B.

    2012-04-01

    Soil and water conservation (SWC) structures are largely present in Southeast Spain. Traditionally, SWC structures such as step terraces and earthen check dams were implemented in agricultural fields. They are usually found in semi-arid traditional rainfed agricultural systems that heavily rely on SWC structures to supplement the sparse rainfall. The on-site SWC measures favor water infiltration and reduce water runoff and soil erosion. In the river system (off site), large concrete/gabion check dams have been constructed since the 70's. The analysis of orthophotographs and field survey observations indicate a severe decay of on-site SWC structures in the agricultural area. This has been observed for the Cárcavo catchment (Murcia). The density of step terraces and check dams decreased by 25% between 1956 and 2005. Changes in the agricultural area can be summarized as: (i) rapid expansion of rainfed crops in marginal areas and (ii) mechanization of agriculture associated with frequent tillage operations. It became evident that the high density of SWC structures has now become a nuisance in rainfed orchards that are maintained by regular shallow tillage. We constrained the effects of SWC structures on hydrological connectivity by assessing their functioning during a heavy storm (return period 8.2 yrs in 2006). The percentage of cropland draining directly on the river system without interference of a check dam has increased from 9% in 1956 to 31% in 2005 and 40 % after the storm in November 2006. While there is a strong decrease of traditional SWC structures, several hundred large check dams have been constructed during the last decades in ephemeral streams (Almeria). 36 of them have been investigated in selected Sierras. The volume of sediment retained was found low (mean: 1.4 t ha-1 yr-1). 67% of the variability has been explained by topographical, land use and agricultural activities. After a field survey in 2009, a large majority of check dams located in non

  10. Implementation of a high precision multi-measurement time-to-digital convertor on a Kintex-7 FPGA

    Science.gov (United States)

    Kuang, Jie; Wang, Yonggang; Cao, Qiang; Liu, Chong

    2018-05-01

    Time-to-digital convertors (TDCs) based on field programmable gate array (FPGA) are becoming more and more popular. Multi-measurement is an effective method to improve TDC precision beyond the cell delay limitation. However, the implementation of TDC with multi-measurement on FPGAs manufactured with 28 nm and more advanced process is facing new challenges. Benefiting from the ones-counter encoding scheme, which was developed in our previous work, we implement a ring oscillator multi-measurement TDC on a Xilinx Kintex-7 FPGA. Using the two TDC channels to measure time-intervals in the range (0 ns-30 ns), the average RMS precision can be improved to 5.76 ps, meanwhile the logic resource usage remains the same with the one-measurement TDC, and the TDC dead time is only 22 ns. The investigation demonstrates that the multi-measurement methods are still available for current main-stream FPGAs. Furthermore, the new implementation in this paper could make the trade-off among the time precision, resource usage and TDC dead time better than ever before.

  11. A quality control circle process to improve implementation effect of prevention measures for high-risk patients.

    Science.gov (United States)

    Feng, Haixia; Li, Guohong; Xu, Cuirong; Ju, Changping; Suo, Peiheng

    2017-12-01

    The aim of the study was to analyse the influence of prevention measures on pressure injuries for high-risk patients and to establish the most appropriate methods of implementation. Nurses assessed patients using a checklist and factors influencing the prevention of a pressure injury determined by brain storming. A specific series of measures was drawn up and an estimate of risk of pressure injury determined using the Braden Scale, analysis of nursing documents, implementation of prevention measures for pressure sores and awareness of the system both before and after carrying out a quality control circle (QCC) process. The overall scores of implementation of prevention measures ranged from 74.86 ± 14.24 to 87.06 ± 17.04, a result that was statistically significant (P prevention measure scores ranged from 11.48 ± 4.18 to 13.96 ± 3.92. Differences in all of the above results are statistically significant (P prevention measures for patients who are vulnerable to pressure sores and is of practical importance to their prevention and control. © 2017 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  12. Mars 2001 Lander Mission: Measurement Synergy Through Coordinated Operations Planning And Implementation

    Science.gov (United States)

    Arvidson, R.; Bell, J. F., III; Kaplan, D.; Marshall, J.; Mishkin, A.; Saunders, S.; Smith, P.; Squyres, S.

    1999-09-01

    The 2001 Mars Surveyor Program Mission includes an orbiter with a gamma ray spectrometer and a multispectral thermal imager, and a lander with an extensive set of instrumentation, a robotic arm, and the Marie Curie Rover. The Mars 2001 Science Operations Working Group (SOWG) is a subgroup of the Project Science Group that has been formed to provide coordinated planning and implementation of scientific observations, particularly for the landed portion of the mission. The SOWG will be responsible for delivery of a science plan and, during operations, generation and delivery of conflict-free sequences. This group will also develop an archive plan that is compliant with Planetary Data System (PDS) standards, and will oversee generation, validation, and delivery of integrated archives to the PDS. In this report we cover one element of the SOWG planning activities, the development of a plan that maximizes the scientific return from lander-based observations by treating the instrument packages as an integrated payload. Scientific objectives for the lander mission have been defined. They include observations focused on determining the bedrock geology of the site through analyses of rocks and also local materials found in the soils, and the surficial geology of the site, including windblown deposits and the nature and history of formation of indurated sediments such as duricrust. Of particular interest is the identification and quantification of processes related to early warm, wet conditions and the presence of hydrologic or hydrothermal cycles. Determining the nature and origin of duricrust and associated salts is -very important in this regard. Specifically, did these deposits form in the vadose zone as pore water evaporated from soils or did they form by other processes, such as deposition of volcanic aerosols? Basic information needed to address these questions includes the morphology, topography, and geologic context of landforms and materials exposed at the site

  13. Mars 2001 Lander Mission: Measurement Synergy Through Coordinated Operations Planning And Implementation

    Science.gov (United States)

    Arvidson, R.; Bell, J. F., III; Kaplan, D.; Marshall, J.; Mishkin, A.; Saunders, S.; Smith, P.; Squyres, S.

    1999-01-01

    The 2001 Mars Surveyor Program Mission includes an orbiter with a gamma ray spectrometer and a multispectral thermal imager, and a lander with an extensive set of instrumentation, a robotic arm, and the Marie Curie Rover. The Mars 2001 Science Operations Working Group (SOWG) is a subgroup of the Project Science Group that has been formed to provide coordinated planning and implementation of scientific observations, particularly for the landed portion of the mission. The SOWG will be responsible for delivery of a science plan and, during operations, generation and delivery of conflict-free sequences. This group will also develop an archive plan that is compliant with Planetary Data System (PDS) standards, and will oversee generation, validation, and delivery of integrated archives to the PDS. In this report we cover one element of the SOWG planning activities, the development of a plan that maximizes the scientific return from lander-based observations by treating the instrument packages as an integrated payload. Scientific objectives for the lander mission have been defined. They include observations focused on determining the bedrock geology of the site through analyses of rocks and also local materials found in the soils, and the surficial geology of the site, including windblown deposits and the nature and history of formation of indurated sediments such as duricrust. Of particular interest is the identification and quantification of processes related to early warm, wet conditions and the presence of hydrologic or hydrothermal cycles. Determining the nature and origin of duricrust and associated salts is -very important in this regard. Specifically, did these deposits form in the vadose zone as pore water evaporated from soils or did they form by other processes, such as deposition of volcanic aerosols? Basic information needed to address these questions includes the morphology, topography, and geologic context of landforms and materials exposed at the site

  14. Synthesis of disialyl Lewis a (Le(a)) structure in colon cancer cell lines by a sialyltransferase, ST6GalNAc VI, responsible for the synthesis of alpha-series gangliosides.

    Science.gov (United States)

    Tsuchida, Akiko; Okajima, Tetsuya; Furukawa, Keiko; Ando, Takayuki; Ishida, Hideharu; Yoshida, Aruto; Nakamura, Yoko; Kannagi, Reiji; Kiso, Makoto; Furukawa, Koichi

    2003-06-20

    Biosynthesis of disialyl Lewis a (Lea) was analyzed using previously cloned ST6GalNAc V and ST6GalNAc VI, which were responsible for the synthesis of alpha-series gangliosides. Among lactotetraosylceramide (Lc4), neolactotetraosylceramide, and their sialyl forms, only sialyl Lc4 was sialylated with ST6GalNAc V and ST6GalNAc VI. The products were confirmed to be disialyl Lea in TLC-immunostaining. Compared with the original substrate GM1b, the synthetic rates of disialyl Lea were 22 and 38% with ST6GalNAc V and ST6GalNAc VI, respectively. Since sialyl Lea could not be converted to disialyl Lea, disialyl Lea was produced only from disialyl Lc4. Therefore, it appears that ST6GalNAc V/VI and fucosyltransferase III (FUT-3) compete for sialyl Lc4, their common substrate. The results of either one transfection or co-transfection of two genes into COS1 cells revealed that both ST6GalNAc VI and FUT-3 contributed in the synthesis of disialyl Lea but partly compete with each other. Many colon cancer cell lines expressed the ST6GalNAc VI gene more or less, and some of them actually expressed disialyl Lea. None of them expressed ST6GalNAc V. These results suggested the novel substrate specificity of ST6GalNAc VI, which is responsible for the synthesis of disialyl Lea but not for alpha-series gangliosides in human colon tissues.

  15. Implementing large scale fast track diagnostics in a comprehensive cancer center, pre- and post-measurement data.

    Science.gov (United States)

    van Harten, W H; Goedbloed, N; Boekhout, A H; Heintzbergen, S

    2018-02-07

    In general, patients with a cancer suspicion visit the hospital multiple times before diagnosis is completed. Using various "operations management" techniques a few fast track diagnostic services were implemented in the Netherlands Cancer Institute (NKI) in 2006. Growing patient numbers and increasing process complexity, led to diminished service levels. To decrease the amount of patient visits and to extend these services beyond the (obvious) breast cancer services, fast track diagnostics is now implemented for all 18 cancer types that present with a frequency of minimally one per week. The throughput time (first visit to diagnosis conversation) was measured before, and after implementation of fast track diagnostics. The process was redesigned closely involving the multidisciplinary teams. In an eclectic approach elements from lean management, theory of constraints and mathematical analysis were used to organize slots per tumor type for MRI, CT, PET and echography. A post measurement was performed after 3 and 6 months. In pre measurement access time was calculated to be 10 to 15 workdays, mean throughput time was 6.0 workdays. It proved possible to design the process of 18 tumors as a fast track, of which 7 as "one stop shop" (diagnosis completed in one visit). Involvement of clinical- and board leadership, massive communication efforts and commitment of physicians to reschedule their work proved decisive. After 3 and 6 months of implementation, the mean access time was 8.2 and 8.7 workdays respectively and mean throughput time was 3.4 and 3.3 workdays respectively. Throughput- and access time were considerably shortened after implementation of fast track diagnostics for 18 cancer types. The involvement of physicians in reorganizing their work and rapid responding to their needs during the implementation phase were a crucial success factor.

  16. Implementing a Process to Measure Return on Investment for Nursing Professional Development.

    Science.gov (United States)

    Garrison, Elisabeth; Beverage, Jodie

    Return on investment (ROI) is one way to quantify the value that nursing professional development brings to the organization. This article describes a process to begin tracking ROI for nursing professional development. Implementing a process of tracking nursing professional development practitioners' ROI increased awareness of the financial impact and effectiveness of the department.

  17. Factors which influence Nova Scotia farmers in implementing energy efficiency and renewable energy measures

    International Nuclear Information System (INIS)

    Bailey, J.A.; Gordon, R.; Burton, D.; Yiridoe, E.K.

    2008-01-01

    Improvements in energy efficiency and renewable energy use can reduce farm operating costs and reduce greenhouse gas (GHG) emissions. Responses (n=224, representing a 32% response rate) from a mail survey were used to assess use and interest in energy efficient and renewable energy options on farms in Nova Scotia, Canada. Energy efficiency options used the most were behavior, insulation, and lighting. Few farms used renewable energy options. Approximately 78% of farmers indicated an interest in implementing energy efficiency and renewable energy options. Interest varied by farm type and size. Interest increased with farm size. The two main efficiency options of interest were lighting (60.8%) and insulation (43.7%), while wind power development (55.5%) and solar water heating (24.5%) were the main renewable options of interest. Farmers concerned about power and equipment reliability were less likely to be interested in implementing options. Farmers concerned about the environment were more likely to be interested in implementing options. Current use of certain energy efficiency technologies, such as efficient lighting, influenced implementation interest

  18. Measurement of a model of implementation for health care : toward a testable theory

    NARCIS (Netherlands)

    Cook, Joan M.; O'Donnell, Casey; Dinnen, Stephanie; Coyne, James C.; Ruzek, Josef I.; Schnurr, Paula P.

    2012-01-01

    Background: Greenhalgh et al. used a considerable evidence-base to develop a comprehensive model of implementation of innovations in healthcare organizations [1]. However, these authors did not fully operationalize their model, making it difficult to test formally. The present paper represents a

  19. The Implementation of Balance Score Card for Performance Measurement in Small and Medium Enterprises: Evidence from Malaysian Health Care Services

    Directory of Open Access Journals (Sweden)

    Budi Suprapto

    2012-01-01

    Full Text Available The needs for SMEs to measure their performance is to improve their service to customers, employees, societies and stakeholders. The purpose of the study was to investigate the implementation of Balance Score Card as the performance measurement system in SMEs. In this study, 1000 mailed questionnaires were sent to health care services in Malaysia. Out of this, only 105 responded and data collected were analyzed. Using factor analysis with varimax rotation technique, the study found four factors with eigenvalue value more than 1.0. Those factors that explained total variance of 69.346 percent, indicated the four components of BSC implemented by SMEs in Malaysian Health Care Services. Those components are as follows: learning and growth, mission and vision, customer and internal business perspective.Key words: Balance Score Card, Performance Measurement, Small and Medium Enterprise

  20. KPIs for measuring the sustainability performance of ecodesign implementation into product development and related processes: a systematic literature review

    DEFF Research Database (Denmark)

    Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    , many difficulties still surround the implementation and management of ecodesign. The main challenges in embedding ecodesign into PDRP are: (i) the lack of support to select key performance indicators (KPI) to measure how well a company is being successful in ecodesign integration from a product......’s impact on the overall corporate behaviour.This research aims at presenting a comprehensive set of sustainability KPI to measure the ecodesign implementation into the PDRP by systematically reviewing the relevant literature regarding sustainability KPIs (social, economic and environmental dimensions......). The underlying research question is “which arethe KPIs for measuring sustainability of ecodesign integration into the product development and related processes?” This research excludes the indicators dealing directly and exclusively with product’s attributes and properties, such as energy and material...

  1. The Colour Treatment: A Convergence of Art and Medicine at the Red Cross Russell Lea Nerve Home.

    Science.gov (United States)

    Berryman, Jim

    2016-01-01

    When the Red Cross opened its new convalescent home at Russell Lea in Sydney in 1919, it contained a coloured room designed for treating ‘nerve cases’. This room was painted by Roy de Maistre, a young artist, and was modelled on the Kemp Prossor colour scheme trialled at the McCaul Convalescent Hospital in London for the treatment of shell shock. Dubbed the ‘colour cure’ by the popular press, this unconventional treatment was ignored by the Australian medical profession. The story of de Maistre's colour experiment is not widely known outside the specialist field of Australian art history. Focusing on the colour room as a point of convergence between art and medicine in the context of the First World War, this article investigates Red Cross activities and the care of soldiers suffering from nervous conditions.

  2. Climate change and its influence on human health, implementation of preventative measures in Europe

    OpenAIRE

    Kuznetsova V. P.; Pogonysheva I. A.

    2018-01-01

    Many European countries are implementing long-term programmes for health protection from climate change. These programmes are based on World Health Assembly Resolution. European office of World Health Organisation studies the data and supports capacity building initiatives in order to strengthen healthcare system response to climate change and to ensure that health issues are considered when decisions are made in other sectors related to health – power industry and transportation. The article...

  3. How to measure the unsecured money market? The Eurosystem's implementation and validation using TARGET2 data

    OpenAIRE

    Luca Arciero; Ronald Heijmans; Richard Heuver; Marco Massarenti; Cristina Picillo; Francesco Vacirca

    2013-01-01

    This paper develops a methodology, based on Furfine (1999), to identify unsecured interbank money market loans from transaction data of the most important euro processing payment system, TARGET2, for maturity ranging from one day (overnight) up to three months. The implementation has been verified with (i) interbank money market transactions executed on the Italian trading platform e-MID and (ii) aggregated reporting by the EONIA panel banks. The Type 2 (false negative) error for the best per...

  4. Measurement properties and implementation of a checklist to assess leadership skills during interdisciplinary rounds in the intensive care unit.

    Science.gov (United States)

    Ten Have, Elsbeth C M; Nap, Raoul E; Tulleken, Jaap E

    2015-01-01

    The implementation of interdisciplinary teams in the intensive care unit (ICU) has focused attention on leadership behavior. A daily recurrent situation in ICUs in which both leadership behavior and interdisciplinary teamwork are integrated concerns the interdisciplinary rounds (IDRs). Although IDRs are recommended to provide optimal interdisciplinary and patient-centered care, there are no checklists available for leading physicians. We tested the measurement properties and implementation of a checklist to assess the quality of leadership skills in interdisciplinary rounds. The measurement properties of the checklist, which included 10 essential quality indicators, were tested for interrater reliability and internal consistency and by factor analysis. The interrater reliability among 3 raters was good (κ, 0.85) and the internal consistency was acceptable (α, 0.74). Factor analysis showed all factor loadings on 1 domain (>0.65). The checklist was further implemented during videotaped IDRs which were led by senior physicians and in which 99 patients were discussed. Implementation of the checklist showed a wide range of "no" and "yes" scores among the senior physicians. These results may underline the need for such a checklist to ensure tasks are synchronized within the team.

  5. Implementation of 252Cf-source-driven power spectrum density measurement system

    International Nuclear Information System (INIS)

    Ren Yong; Wei Biao; Feng Peng; Li Jiansheng; Ye Cenming

    2012-01-01

    The principle of 252 Cf-source-driven power spectrum density measurement method is introduced. A measurement system and platform is realized accordingly, which is a combination of hardware and software, for measuring nuclear parameters. The detection method of neutron pulses based on an ultra-high-speed data acquisition card (three channels, 1 GHz sampling rate, 1 ns synchronization) is described, and the data processing process and the power spectrum density algorithm on PC are designed. This 252 Cf-source-driven power spectrum density measurement system can effectively obtain the nuclear tag parameters of nuclear random processes, such as correlation function and power spectrum density. (authors)

  6. Implementation of a metrology programme to provide traceability for radionuclides activity measurements in the CNEN Radiopharmaceuticals Producers Centers

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Erica A.L. de; Braghirolli, Ana M.S.; Tauhata, Luiz; Gomes, Regio S.; Silva, Carlos J., E-mail: erica@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Delgado, Jose U.; Oliveira, Antonio E.; Iwahara, Akira, E-mail: ealima@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    The commercialization and use of radiopharmaceuticals in Brazil are regulated by Agencia Nacional de Vigilancia Sanitaria (ANVISA) which require Good Manufacturing Practices (GMP) certification for Radiopharmaceuticals Producer Centers. Quality Assurance Program should implement the GMP standards to ensure radiopharmaceuticals have requirements quality to proving its efficiency. Several aspects should be controlled within the Quality Assurance Programs, and one of them is the traceability of the Radionuclides Activity Measurement in radiopharmaceuticals doses. The quality assurance of activity measurements is fundamental to maintain both the efficiency of the nuclear medicine procedures and patient and exposed occupationally individuals safety. The radiation doses received by patients, during the nuclear medicine procedures, is estimated according to administered radiopharmaceuticals quantity. Therefore it is very important either the activity measurements performed in radiopharmaceuticals producer centers (RPC) as the measurements performed in nuclear medicine services are traceable to national standards. This paper aims to present an implementation program to provide traceability to radionuclides activity measurements performed in the dose calibrators(well type ionization chambers) used in Radiopharmaceuticals Producer Center placed in different states in Brazil. The proposed program is based on the principles of GM Pand ISO 17025 standards. According to dose calibrator performance, the RPC will be able to provide consistent, safe and effective radioactivity measurement to the nuclear medicine services. (author)

  7. Measuring implementation behaviour of menu guidelines in the childcare setting: confirmatory factor analysis of a theoretical domains framework questionnaire (TDFQ).

    Science.gov (United States)

    Seward, Kirsty; Wolfenden, Luke; Wiggers, John; Finch, Meghan; Wyse, Rebecca; Oldmeadow, Christopher; Presseau, Justin; Clinton-McHarg, Tara; Yoong, Sze Lin

    2017-04-04

    While there are number of frameworks which focus on supporting the implementation of evidence based approaches, few psychometrically valid measures exist to assess constructs within these frameworks. This study aimed to develop and psychometrically assess a scale measuring each domain of the Theoretical Domains Framework for use in assessing the implementation of dietary guidelines within a non-health care setting (childcare services). A 75 item 14-domain Theoretical Domains Framework Questionnaire (TDFQ) was developed and administered via telephone interview to 202 centre based childcare service cooks who had a role in planning the service menu. Confirmatory factor analysis (CFA) was undertaken to assess the reliability, discriminant validity and goodness of fit of the 14-domain theoretical domain framework measure. For the CFA, five iterative processes of adjustment were undertaken where 14 items were removed, resulting in a final measure consisting of 14 domains and 61 items. For the final measure: the Chi-Square goodness of fit statistic was 3447.19; the Standardized Root Mean Square Residual (SRMR) was 0.070; the Root Mean Square Error of Approximation (RMSEA) was 0.072; and the Comparative Fit Index (CFI) had a value of 0.78. While only one of the three indices support goodness of fit of the measurement model tested, a 14-domain model with 61 items showed good discriminant validity and internally consistent items. Future research should aim to assess the psychometric properties of the developed TDFQ in other community-based settings.

  8. Comparing Food Provided and Wasted before and after Implementing Measures against Food Waste in Three Healthcare Food Service Facilities

    Directory of Open Access Journals (Sweden)

    Christina Strotmann

    2017-08-01

    Full Text Available The aim of the study was to reduce food waste in a hospital, a hospital cafeteria, and a residential home by applying a participatory approach in which the employees were integrated into the process of developing and implementing measures. Initially, a process analysis was undertaken to identify the processes and structures existing in each institution. This included a 2-week measurement of the quantities of food produced and wasted. After implementing the measures, a second measurement was conducted and the results of the two measurements were compared. The average waste rate in the residential home was significantly reduced from 21.4% to 13.4% and from 19.8% to 12.8% in the cafeteria. In the hospital, the average waste rate remained constant (25.6% and 26.3% during the reference and control measurements. However, quantities of average daily food provided and wasted per person in the hospital declined. Minimizing overproduction, i.e., aligning the quantity of meals produced to that required, is essential to reducing serving losses. Compliance of meal quality and quantity with customer expectations, needs, and preferences, i.e., the individualization of food supply, reduces plate waste. Moreover, establishing an efficient communication structure involving all actors along the food supply chain contributes to decreasing food waste.

  9. Danish farmers' perception of water quality, nutrient reduction measures and their implementation strategy

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni; Andersen, Laura Mørch; Pedersen, Søren Marcus

    2015-01-01

    Implementation of voluntary nutrient reduction technologies among Danish farms is relatively low despite the introduction of a number of incentives on such technologies. With data from 267 farmers, this study analyzed the level of uptake of these technologies and the farmers’ perception of water...... and procedures of financial, technical and institutional support for the existing and future incentives. Ultimately, tailor-made incentives could be designed based on farm structure and physical characteristics so as to improve the pace of adoption of the technologies thereby reducing water pollution from farms...

  10. Measuring the implementation of ecodesign management practices: a review and consolidation of process-oriented performance indicators

    DEFF Research Database (Denmark)

    Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2017-01-01

    Ecodesign plays an important role in manufacturing companies’ quest for improved sustainability performance. However, many ecodesign efforts are geared towards tackling single-issue discrete improvements, in contrast to operationalizing, measuring and acting upon the consistent improvement...... towards enhanced sustainability performance. In face of this challenge, this paper aims at providing organizations with a set of process-oriented indicators to supporting and enhancing ecodesign implementation and management. This research was grounded on a 2-phase approach to (i) cross...

  11. Reliability and efficiency upgrades of power systems operation by implementing intelligent electronic devices with synchrophasor measurement technology support

    Directory of Open Access Journals (Sweden)

    Mokeev Alexey

    2017-01-01

    Full Text Available This paper reviews issues of reliability and efficiency upgrades of power systems functions by means of a widespread implementation of intelligent electronic devices (IED in various purposes supporting synchrophasor measurement technology. Thus, such issues as IED’s operational analysis in the conditions of electromagnetic and electromechanical transient processes and synthesis of digital filters that improve static and dynamic responses of these devices play an important role in their development.

  12. Reliability and efficiency upgrades of power systems operation by implementing intelligent electronic devices with synchrophasor measurement technology support

    OpenAIRE

    Mokeev Alexey

    2017-01-01

    This paper reviews issues of reliability and efficiency upgrades of power systems functions by means of a widespread implementation of intelligent electronic devices (IED) in various purposes supporting synchrophasor measurement technology. Thus, such issues as IED’s operational analysis in the conditions of electromagnetic and electromechanical transient processes and synthesis of digital filters that improve static and dynamic responses of these devices play an important role in their devel...

  13. Ground-water investigations of the Project Gnome area, Eddy and Lea Counties, New Mexico

    Science.gov (United States)

    Cooper, J.B.

    1962-01-01

    The U.S. Atomic Energy Commission, through the Office of Test Operations, Albuquerque Operations Office, plans to detonate a nuclear device in a massive salt bed 1,200 feet beneath the land surface. The project, known as Project Gnome, is an element of the Plowshare program--a study of peacetime applications of nuclear fission. The location of the proposed underground shot is in a sparsely-populated area in southeastern Eddy County, N. Mex., east of the Pecos River and about 25 miles southeast of the city of Carlsbad. The area is arid to Semiarid and ground water is a vital factor in the economic utilization of the land, which is primarily used for stock raising. An investigation of the Project Gnome site and surrounding area for the purposes of evaluating the ground-water resources and the possible effect upon them from the detonation of the nuclear shot was desired by the Commission. This report describes work done by the U.S. Geological Survey on behalf of the Commission and presents results of the investigation of the ground-water resources and geology of the area. The most intensive investigations were made within a 15-mile radius of the site of Project Gnome and mainly on the east side of the Pecos River. The total area of study of over 1,200 square miles includes parts of Eddy and Lea Counties, N. Mex. The Project Gnome site is in the sedimentary Delaware Basin. It is underlain by about 18,000 feet of sedimentary rocks ranging in age from Ordovician to Recent. Upper Permian evaporitic rocks, which contain the principal source of potash available in the United States, are worked in nearby mines. The potash minerals are found in a massive salt bed about 1,400 feet thick in the Salado Formation of Permian age. The land surface of the area is covered mostly by a wind-blown sand and caliche; however, rocks of the Rustler Formation of Permian age and younger rocks of Permian, Triassic, Pleistocene(?) and Recent age crop out at several localities. Solution by

  14. Essential Measures for Student Success: Implementing Cooperation, Collaboration, and Coordination between Schools and Parents

    Science.gov (United States)

    Kirby, Edwena

    2012-01-01

    This book unveils "essential measures" that create a revitalized educational system of which educators and parents can use to promote student success. When these measures are applied properly, the benefits include, eradicating student fear, elevating student motivation, improving school attendance, and reducing student dropout rates. These…

  15. Morphological features of different polyploids for adaptation and molecular characterization of CC-NBS-LRR and LEA gene families in Agave L.

    Science.gov (United States)

    Tamayo-Ordóñez, M C; Rodriguez-Zapata, L C; Narváez-Zapata, J A; Tamayo-Ordóñez, Y J; Ayil-Gutiérrez, B A; Barredo-Pool, F; Sánchez-Teyer, L F

    2016-05-20

    Polyploidy has been widely described in many Agave L. species, but its influence on environmental response to stress is still unknown. With the objective of knowing the morphological adaptations and regulation responses of genes related to biotic (LEA) and abiotic (NBS-LRR) stress in species of Agave with different levels of ploidy, and how these factors contribute to major response of Agave against environmental stresses, we analyzed 16 morphological trials on five accessions of three species (Agave tequilana Weber, Agave angustifolia Haw. and Agave fourcroydes Lem.) with different ploidy levels (2n=2x=60 2n=3x=90, 2n=5x=150, 2n=6x=180) and evaluated the expression of NBS-LRR and LEA genes regulated by biotic and abiotic stress. It was possible to associate some morphological traits (spines, nuclei, and stomata) to ploidy level. The genetic characterization of stress-related genes NBS-LRR induced by pathogenic infection and LEA by heat or saline stresses indicated that amino acid sequence analysis in these genes showed more substitutions in higher ploidy level accessions of A. fourcroydes Lem. 'Sac Ki' (2n=5x=150) and A. angustifolia Haw. 'Chelem Ki' (2n=6x=180), and a higher LEA and NBS-LRR representativeness when compared to their diploid and triploid counterparts. In all studied Agave accessions expression of LEA and NBS-LRR genes was induced by saline or heat stresses or by infection with Erwinia carotovora, respectively. The transcriptional activation was also higher in A. angustifolia Haw. 'Chelem Ki' (2n=6x=180) and A. fourcroydes 'Sac Ki' (2n=5x=150) than in their diploid and triploid counterparts, which suggests higher adaptation to stress. Finally, the diploid accession A. tequilana Weber 'Azul' showed a differentiated genetic profile relative to other Agave accessions. The differences include similar or higher genetic representativeness and transcript accumulation of LEA and NBS-LRR genes than in polyploid (2n=5x=150 and 2n=6x=180) Agave accessions

  16. [Designing and implementation of a web-based quality monitoring system for plasma glucose measurement in multicenter population study].

    Science.gov (United States)

    Liu, Yong; Wang, Limin; Pang, Richard; Mo, Nanxun; Hu, Yan; Deng, Qian; Hu, Zhaohui

    2015-05-01

    The aim of this paper is to describe the designing and implementation of a web-based plasma glucose measurement quality monitoring system to assess the analytical quality of plasma glucose measurements in multicenter population study and provide evidence for the future studies. In the chronic non-communicable disease and related factor surveillance in China, a web based quality monitoring system for plasma glucose measurement was established to conduct evaluation on plasma glucose monitoring quality and effectiveness in 302 surveillance centers, including quality control data entry, transmission and feedback. The majority of the surveillance centers met the quality requirements and passed the evaluation of reproducibility and precision of plasma glucose measurement, only a few centers required intensive training and re-assessment. In order to ensure the completeness and reliability of plasma glucose measurement in the surveillance centers, the establishment of web-based plasma glucose measurement quality control system can facilitate the identification of the qualified surveillance centers and evaluation of plasma glucose measurement quality in different regions. Communication and training are important in ensuring plasma glucose measurement quality. It is necessary to further improve this web-based plasma glucose measurement quality monitoring system in the future to reduce the method specific plasma glucose measurement bias.

  17. Multi-Hydro: a multi module physically based model to evaluate effect of implementation of the flood resilience measure.

    Science.gov (United States)

    Giangola-Murzyn, A.; Gires, A.; Richard, J.; Tchiguirinskaia, I.; Schertzer, D.

    2012-04-01

    Nowadays cities are rapidly growing, gradually transforming the nearby rural area into peri-urban area where the urbanization rate increases again and again. Many of these areas are located in the floodplain. In this context and to facilitate the choice of the protection measure of the building of these areas, the European SMARTeST project (Smart Resilient Technologies and System Tools) aims to create a guideline regrouping the different existing system and their conditions of use for different situations. In this context, the Multi-Hydro model was improved and tested to evaluate the effect of the implementation of the flood resilience measures. This model consists of a coupling between different modules relying on existing and validated hydrological and physically based models for runoff processes, sewer system discharge and subsurface processes. The basic data are rainfall and GIS data of elevation, land use or soil description. However, the data necessary to perform this type of model can be difficult to access. These missing data, which can be evaluated by average values, can cause inaccuracies in the simulated water levels. But if the water level cannot yet able to be connected to survey measurements, the location of this water is very useful to understand the hydrological behavior of the study area. The ability to circle the missing data enables the portability of the model, which is a major advantage for the SMARTeST project. Multi-Hydro can be thus a tool useable by all project partners. The model was implemented on a case study of the Paris area, the city of Villecresnes. Various scenarios in terms of implementation of protection measures are tested under a fixed rainfall scenario. The results of these simulations, analyzed as series of risk maps and by an advanced statistical analysis, show that depending on the selected measures (single barrier or perimeter), the behavior of the watershed is modified. Indeed, the modifications of the land use of the

  18. FLEXIBILITY OF INDUSTRIAL “PRODUCT-SERVICE” SYSTEM: IMPLEMENTATION AND MEANS OF MEASUREMENT

    Directory of Open Access Journals (Sweden)

    S. Panteleev

    2016-01-01

    Full Text Available Article is devoted to the analysis of the flexibility of industrial “product-service” systems (hereafter IPSS, meaning provision of adaptability to the changing needs of users along the life-cycle of IPSS. Flexibility of the system gives company-producer of the industrial equipment competitive advantages on the b-to-b market. Due to this reason development and improvement of the means of valuation of flexibility is an important field of study. Aim of the article is IPSS flexibility analysis and development of efficient means of flexibility valuation.Article tasks. Research the advantages of the IPSS flexibility; analyze problems that arise as the result of flexibility implementation; propose ways to solve these problems.Methodology. Methodological base of the article are the following scientific methods: deduction, comparative and individual analysis, methods of systematization and generalization of theoretical materials.Results. Conclusions / importance. Article proposes to use IPSS concept model that takes into consideration IPSS resources, actions and functions. With the help of this model switching options, that reflect the flexibility of IPSS, can be defi ned. Economic and technological aspects of changes should be taken into consideration with the help of integrated, iterative approach, that compares supplier costs on flexibility implementation and the clients desire to pay for it. At the same time supplier can calculate the potential profi t from provision of fl exibility. Thus, the basis for efficient decision making when the IPSS is structures is made.

  19. Countywide implementation of crisis intervention teams: Multiple methods, measures and sustained outcomes.

    Science.gov (United States)

    Kubiak, Sheryl; Comartin, Erin; Milanovic, Edita; Bybee, Deborah; Tillander, Elizabeth; Rabaut, Celeste; Bisson, Heidi; Dunn, Lisa M; Bouchard, Michael J; Hill, Todd; Schneider, Steven

    2017-09-01

    The crisis intervention team (CIT) is a tool that can be used to foster pre-booking diversion of individuals with mental illness from the criminal justice system and into community treatment services. Although CIT is often implemented solely as the training of law enforcement officers, the model stipulates that CIT is a vehicle for collaboration with community stakeholders who share a similar philosophy, as well as expanded mental health services offering a 24 hour-seven days per week drop-off option for law enforcement officers. This case study presents the countywide implementation of CIT and expands previous findings on the prevalence of officer interaction with persons with mental health issues and CIT training outcomes, including changes in officer perception of individuals with mental health issues. Furthermore, analysis of the disposition of calls for officer assistance coded as mental health or suicide found significant increases in officer drop-offs to the mental health crisis center post-CIT training. Interrupted time series analysis determined that this change has been sustained over time, perhaps owing to the unique communication between county law enforcement and mental health staff. Implications for policy and practice are discussed. Copyright © 2017 John Wiley & Sons, Ltd.

  20. FORMATION AND IMPLEMENTATION OF PUBLIC NEEDS AS A MEASURE OF IMPROVEMENT OF SOCIETY TERRITORIAL ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Larysa Bogush

    2015-11-01

    Full Text Available The purpose of the paper is to study the relationship of the formation and implementation of the range of social needs with the evolution and activity is focused on the improvement of the territorial organization of society. Methodology of research involves: the substantiation of the origin, factors for the development, approaches to classification, functions of public needs in the development of state and society; the study of the socio-humanitarian space of formation and realization of the needs of individuals, functional and territorial communities, as well as a mechanism of their satisfaction at the national and spatial scales (on the example of Ukraine – a country with a developing economy, wherein the decentralization of powers in the field social welfare and consolidation of local communities are implemented at present. Results. Summarized and proved the patterns and trends of development, evolution, transformation of needs of social groups, functional and territorial communities of the population, as well as the relationship of these processes with the economic and institutional capacities and mechanisms of satisfaction of the spectrum of social needs in consideration of peculiarities, achieved and desired parameters of development of productive forces, human and other components of the social and humanitarian potential, cultural features of the society. The development of the institutional, functional and territorial organization of society, in fact, is a process of formation and implementation in the range of human needs (individual and collective, which is estimated with the factors, conditions and mechanisms of their satisfaction, including through the dynamics of the positions of the spectrum of social groups and subjects concerning the required amount of vital goods consumption. Practical implications. Social and political transformation stimulates the establishment of the multidirectional formation in the Ukrainian economy of

  1. Performance Measurement Implementation Of Minimum Service Standards For Basic Education Based On The Balanced Scorecard

    Directory of Open Access Journals (Sweden)

    Budiman Rusli

    2015-08-01

    Full Text Available Policies Minimum Service Standards for Basic Education has rolled out since 2002 by the minister in accordance with the Decree No. 129a U 2004 About Minimum Service Standards Education is continually updated and lastly Regulation of the Minister of Education and Culture No. 23 of 2013. All of the district government town should achieve the target of achieving 100 per cent in each of the indicators listed in the minimum service standards for the end of 2014. achievement pad on each indicator is just one measure of the performance of the local government department of education. Unfortunately from the announced target for 27 indicators that exist almost all regions including local governments do not reach Tangerang Regency. It is necessary for measuring the performance of local authorities particularly the education department. One performance measure modern enough that measurements can be done that The Balance Scorecard BSc. In the Balanced Scorecard is a management tool contemporare complete measure company performance not only of the financial perspective but also non-financial performance such as Customer Perspective Internal Business Processes and Learning and Growth. This approach is actually ideally suited for multinational companies because this approach requires very expensive but can be used to measure the profit performance of the company in addition to the combination of a long-term strategic and short-strategic. Balanced Scorecard it can also be done in measuring the performance of public sector services as well by modifying a few things so it can be used to measure the performance of the public sector including the Performance Measurement Minimum Service Standards for Basic Education.

  2. Implementation of a Particle Image Velocimetry System for Wind Tunnel Flowfield Measurements

    Science.gov (United States)

    2014-12-01

    Instrumentation Wind tunnel speed was measured by two pitot probes mounted on opposite tunnel walls upstream of the model and above the ground...board. The pitot probes were connected differentially to Scanivalve 1-psi transducers. A secondary measurement of wind tunnel speed was made with the...Manf. Model Range 1 Tunnel Vel (south pitot ) Transducer Scanivalve CR24D 1 psi 2 Tunnel Vel (north pitot ) Transducer Scanivalve CR24D 1 psi 3

  3. Implementation of an Ultra-Bright Thermographic Phosphor for Gas Turbine Engine Temperature Measurements

    Science.gov (United States)

    Eldridge, Jeffrey I.; Bencic, Timothy J.; Zhu, Dongming; Cuy, Michael D.; Wolfe, Douglas E.; Allison, Stephen W.; Beshears, David L.; Jenkins, Thomas P.; Heeg, Bauke; Howard, Robert P.; hide

    2014-01-01

    The overall goal of the Aeronautics Research Mission Directorate (ARMD) Seedling Phase II effort was to build on the promising temperature-sensing characteristics of the ultrabright thermographic phosphor Cr-doped gadolinium aluminum perovskite (Cr:GAP) demonstrated in Phase I by transitioning towards an engine environment implementation. The strategy adopted was to take advantage of the unprecedented retention of ultra-bright luminescence from Cr:GAP at temperatures over 1000 C to enable fast 2D temperature mapping of actual component surfaces as well as to utilize inexpensive low-power laser-diode excitation suitable for on-wing diagnostics. A special emphasis was placed on establishing Cr:GAP luminescence-based surface temperature mapping as a new tool for evaluating engine component surface cooling effectiveness.

  4. An Improved Fuzzy C-Means Algorithm for the Implementation of Demand Side Management Measures

    Directory of Open Access Journals (Sweden)

    Ioannis Panapakidis

    2017-09-01

    Full Text Available Load profiling refers to a procedure that leads to the formulation of daily load curves and consumer classes regarding the similarity of the curve shapes. This procedure incorporates a set of unsupervised machine learning algorithms. While many crisp clustering algorithms have been proposed for grouping load curves into clusters, only one soft clustering algorithm is utilized for the aforementioned purpose, namely the Fuzzy C-Means (FCM algorithm. Since the benefits of soft clustering are demonstrated in a variety of applications, the potential of introducing a novel modification of the FCM in the electricity consumer clustering process is examined. Additionally, this paper proposes a novel Demand Side Management (DSM strategy for load management of consumers that are eligible for the implementation of Real-Time Pricing (RTP schemes. The DSM strategy is formulated as a constrained optimization problem that can be easily solved and therefore, making it a useful tool for retailers’ decision-making framework in competitive electricity markets.

  5. Design and implementation of VUV-CD and LD measurements using an ac modulated polarizing undulator

    International Nuclear Information System (INIS)

    Yagi-Watanabe, K.; Yamada, T.; Tanaka, M.; Kaneko, F.; Kitada, T.; Ohta, Y.; Nakagawa, K.

    2005-01-01

    VUV circular dichroism (CD) and linear dichroism (LD) have been successfully measured at wavelengths beyond the conventional limit by using an ac modulated polarizing undulator. We have developed CD and LD measuring technique by polarization modulation at the source, without using transmission type polarizing modulator, to extend to the coverage to wavelengths shorter than 140-bar nm. AIST developed in 1986 ac polarizing undulator by using a electron storage ring 'TERAS' based on an original concept. The undulator which can produce any desired polarization of vertical- and horizontal-linear polarization (VLP and HLP) and right- and left-handed circular polarization (RCP and LCP) is specially well suited to both measurements of CD and LD. With this undulator, the polarization alternate in the order of VLP-RCP-HLP-RCP-VLP-LCP-HLP-LCP-VLP-, i.e. when circular polarization is modulated in f Hz, linear polarization alters in 2f Hz. This allows us simultaneous measurements of CD and LD. Since the TERAS can produce ac-modulated polarized radiation of wavelength as short as 40-bar nm, it is expected to have CD and LD measurement extended to 40-bar nm

  6. Design and implementation of a versatile and variable-frequency piezoelectric coefficient measurement system.

    Science.gov (United States)

    Wu, J S; Huang, Y K; Wu, F L; Lin, D Y

    2012-08-01

    We present a simple but versatile piezoelectric coefficient measurement system, which can measure the longitudinal and transverse piezoelectric coefficients in the pressing and bending modes, respectively, at different applied forces and a wide range of frequencies. The functionality of this measurement system has been demonstrated on three samples, including a PbZr(0.52)Ti(0.48)O(3) (PZT) piezoelectric ceramic bulk, a ZnO thin film, and a laminated piezoelectric film sensor. The static longitudinal piezoelectric coefficients of the PZT bulk and the ZnO film are estimated to be around 210 and 8.1 pC/N, respectively. The static transverse piezoelectric coefficients of the ZnO film and the piezoelectric film sensor are determined to be, respectively, -0.284 and -0.031 C/m(2).

  7. Implementation of a stroke registry is associated with an improvement in stroke performance measures in a tertiary hospital in Mexico.

    Science.gov (United States)

    Herrera, Ana Lucia; Góngora-Rivera, Fernando; Muruet, Walter; Villarreal, Héctor Jorge; Gutiérrez-Herrera, Mildred; Huerta, Lena; Carrasco, Diana; Soto-García, Anally; Espinosa-Ortega, Meztli

    2015-04-01

    Stroke registries provide a simple way for improving patient care, and its use has been associated with a better adherence to the published guidelines. Few Latin American countries had established stroke registries. Our study is the first in Mexico to report the effects of implementing a stroke registry. To determine if the implementation of a systematized registry is associated with an improved adherence to the performance measures. We compared prospective data (August 2008-November 2010) against historical controls (February 2005-July 2008). Our stroke registry (i-Registro Neurovascular) consists of a standardized clinical form that includes demographic and clinical variables (risk factors, medications, neuroimaging, etiology, acute and outpatient treatments, and neurologic scores [National Institutes of Health Stroke Scale and modified Rankin Scale]). We evaluated 9 performance measures suggested by the American Heart Association and the Joint Commission. We analyzed the data from 574 patients, 260 from the prospective phase and 314 from historical controls. No significant statistical differences in demographic characteristics or stroke risk factors were found. The implementation of the stroke registry was associated with a statistically significant (P cost and readily achievable and a viable option for encouraging an increased report of guidelines adherence of other hospitals in Latin America. Copyright © 2015 National Stroke Association. Published by Elsevier Inc. All rights reserved.

  8. An evaluation of security measures implemented to address physical threats to water infrastructure in the state of Mississippi.

    Science.gov (United States)

    Barrett, Jason R; French, P Edward

    2013-01-01

    The events of September 11, 2001, increased and intensified domestic preparedness efforts in the United States against terrorism and other threats. The heightened focus on protecting this nation's critical infrastructure included legislation requiring implementation of extensive new security measures to better defend water supply systems against physical, chemical/biological, and cyber attacks. In response, municipal officials have implemented numerous safeguards to reduce the vulnerability of these systems to purposeful intrusions including ongoing vulnerability assessments, extensive personnel training, and highly detailed emergency response and communication plans. This study evaluates fiscal year 2010 annual compliance assessments of public water systems with security measures that were implemented by Mississippi's Department of Health as a response to federal requirements to address these potential terrorist threats to water distribution systems. The results show that 20 percent of the water systems in this state had at least one security violation on their 2010 Capacity Development Assessment, and continued perseverance from local governments is needed to enhance the resiliency and robustness of these systems against physical threats.

  9. From pioneering to implementing automated blood pressure measurement in clinical practice: Thomas Pickering's legacy

    DEFF Research Database (Denmark)

    Stolarz-Skrzypek, Katarzyna; Thijs, Lutgarde; Wizner, Barbara

    2010-01-01

    Thomas G. Pickering spent most of his scientific career in carrying out research on clinical hypertension and blood pressure (BP) measurement. In our review of Pickering's seminal work, we first focused on white-coat hypertension and masked hypertension, two terms that he had introduced. Next, we...... highlighted the early publications of Pickering on diurnal BP variability and on the clinical application of self-measured BP. Pickering's work inspired many investigators worldwide and constituted a solid basis for further research. Pickering's original ideas led to algorithms for risk stratification...

  10. Burnup verification tests with the FORK measurement system-implementation for burnup credit

    International Nuclear Information System (INIS)

    Ewing, R.I.

    1994-01-01

    Verification measurements may be used to help ensure nuclear criticality safety when burnup credit is applied to spent fuel transport and storage systems. The FORK system measures the passive neutron and gamma-ray emission from spent fuel assemblies while in the storage pool. It was designed at Los Alamos National Laboratory for the International Atomic Energy Agency safeguards program and is well suited to verify burnup and cooling time records at commercial Pressurized Water Reactor (PWR) sites. This report deals with the application of the FORK system to burnup credit operations

  11. From pioneering to implementing automated blood pressure measurement in clinical practice: Thomas Pickering's legacy

    DEFF Research Database (Denmark)

    Stolarz-Skrzypek, Katarzyna; Thijs, Lutgarde; Wizner, Barbara

    2010-01-01

    Thomas G. Pickering spent most of his scientific career in carrying out research on clinical hypertension and blood pressure (BP) measurement. In our review of Pickering's seminal work, we first focused on white-coat hypertension and masked hypertension, two terms that he had introduced. Next, we...

  12. The CMS Beam Halo Monitor at LHC implementation and first measurements

    CERN Document Server

    Tosi, Nicolo

    2017-01-01

    A Cherenkov based detector system has been installed at the Large Hadron Collider (LHC), in order to measure the Machine Induced Background (MIB) for the Compact Muon Solenoid (CMS) experiment.The system is composed of forty identical detector units formed by a cylindrical Quartz radiator directly coupled to a Photomultiplier. These units are installed at a radius of 1.8m and a distance of 20.6 m from the CMS interaction point.The fast and direction-sensitive signal allows to measure incoming MIB particles while suppressing the much more abundant collision products and albedo particles, which reach the detector at a different time and from a different direction.The system readout electronics is based on the QIE10 ASIC and a uTCA based back-end, and it allows a continuous online measurement of the background rate separately per each bunch.The detector has been installed in 2015 and is now fully commissioned. Measurements demonstrating the capability of detecting anomalous beam conditions will be presented.

  13. Design measures to facilitate implementation of safeguards at future water cooled nuclear power plants

    International Nuclear Information System (INIS)

    1999-01-01

    The report is intended to present guidelines to the State authorities, designers and prospective purchasers of future water cooled power reactors which, if taken into account, will minimize the impact of IAEA safeguards on plant operation and ensure efficient and effective acquisition of safeguards data to the mutual benefit of the Member State, the plant operator and the IAEA. These guidelines incorporate the IAEA's experience in establishing and carrying out safeguards at currently operating nuclear power plants, the ongoing development of safeguards techniques and feedback of experience from plant operators and designers on the impact of IAEA safeguards on plant operation. The following main subjects are included: The IAEA's safeguards function for current and future nuclear power plants; summary of the political and legal foundations of the IAEA's safeguards system; the technical objective of safeguards and the supply and use of required design information; safeguards approaches for nuclear power plants; design implications of experience in safeguarding nuclear power plants and guidelines for future water cooled reactors to facilitate the implementation of safeguards

  14. Conceptual provisions of the implementation of energy saving measures in the residential facilities

    Directory of Open Access Journals (Sweden)

    Meshcheryakova Tatiana

    2017-01-01

    Full Text Available Research purpose is identification of sales problems of energy saving actions for residential sector of economy, including with use of the power service contract. The choice of the object of the study is related to the general issues on energy saving of residential facilities and increasing the number of unresolved problems. Unfortunately, the efficiency of energy consumption of housing stock is extremely low that directly leads to an increase in citizens’ payments for public utilities (housing and communal services. There are many problems associated with the aging of fixed assets: it becomes especially evident in winter seasons. The level of quality of delivery, distribution and consumption of expensive heat resources that has the greatest impact on a residence comfort and sometimes human life and health, is very low. Our population faces to year overheating or freezing, to leakages through worn pipes and the subsequent disconnection of water and heat. Despite the public declaration of the of the active processes of modernization of the housing municipal economy in the Russian Federation, the implementation of the necessary energy-saving elements in the housing sector is evolving very slowly. The article presents conceptual positions, which will bring the issues related to energy saving and efficiency to a new level.

  15. Low flow measurement for infusion pumps: implementation and uncertainty determination of the normalized method

    International Nuclear Information System (INIS)

    Cebeiro, J; Musacchio, A; Sardá, E Fernández

    2011-01-01

    Intravenous drug delivery is a standard practice in hospitalized patients. As the blood concentration reached depends directly on infusion rate, it is important to use safe devices that guarantee output accuracy. In pediatric intensive care units, low infusion rates (i.e. lower than 10.0 ml/h) are frequently used. Thus, it would be necessary to use control programs to search for deviations at this flow range. We describe the implementation of a gravimetric method to test infusion pumps in low flow delivery. The procedure recommended by the ISO/IEC 60601-2-24 standard was used being a reasonable option among the methods frequently used in hospitals, such as infusion pumps analyzers and volumetric cylinders. The main uncertainty sources affecting this method are revised and a numeric and graphic uncertainty analysis is presented in order to show its dependence on flow. Additionally, the obtained uncertainties are compared to those presented by an automatic flow analyzer. Finally, the results of a series of tests performed on a syringe infusion pump operating at low rates are shown.

  16. Grant request: to implement energy conservation measures as part of the state original and supplemental energy conservation plans

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-16

    The program measures described in this document comprise a grant request to DOE under the Energy Policy and Conservation Act of 1975 and the Energy Conservation and Production Act of 1976. The amount requested, $5,555,000, will allow the extension, acceleration, and implementation of energy conservation activities already in progress in California. Accomplishments to date have included the adoption of residential standards, and the implementation of an energy survey program for public buildings. Efficiency standards have been established for refrigerators and room and central air conditioners, appliances which utilize a significant amount of residential energy. Before the end of 1977, efficiency standards will be established for clothes dryers, washers, and water heaters. Program elements are: technical/financial assistance; public awareness; standards setting; solar element; research/analysis/evaluation; and coordination and management.

  17. SU-F-18C-10: Clinical Implementation of Radiochromic Film Based CTDI Measurements

    International Nuclear Information System (INIS)

    Quintero, C; Seuntjens, J; Devic, S; Tomic, N; DeBlois, F

    2014-01-01

    Purpose: To evaluate accuracy and reproducibility of a radiochromic film-based protocol to measure computer tomography dose index (CTDI) as a part of annual QA on CT scanners and kV CBCT systems attached to linear accelerators. Methods: Energy dependence of Gafchromic XR-QA2(R) film model was tested over imaging beam qualities (50 – 140 kVp). Film pieces were irradiated in air to known values of air kerma in air (up to 10 cGy). Change in film reflectance was determined with an in-house written code using images produced by a flatbed document scanner. Calibration curves for each beam quality were created, and film responses for same air-kerma values were compared.Sets of film strips were placed into holes of a CTDI phantom and irradiated for several clinical scanning protocols on CT-simulators and CBCT systems. Film reflectance change was converted into dose to water and used to calculate CTDIvol values. Measured CTDIvol values were compared to tabulated CTDIvol values. Results: Average variations of ±5.2% in the mean film reflectance change were observed in the energy range of 80 to 140 keV, and 11.1% between 50 and 140 keV. The averaged measured CTDI values presented a mean variation for the same machine and protocol of 2.6%. However, measured CTDI values were in average 10% lower than tabulated CTDI values for CT-simulators, and 44% higher for CBCT systems. Conclusion: We found that in relatively broad range of beam qualities used in diagnostic radiology variation of film response is within ±5% resulting in ±15% systematic error in dose estimates if a single calibration curve is used. Relatively large discrepancy between measured and tabulated CTDI values for different protocols and imaging systems used within radiotherapy department strongly support the trend towards replacing CTDI value with equilibrium dose measurement in the center of cylindrical phantom as suggested by TG-111. This work was supported by the Natural Sciences and Engineering Research

  18. Review of transmission routes of 24 infectious diseases preventable by biosecurity measures and comparison of the implementation of these measures in pig herds in six European countries

    DEFF Research Database (Denmark)

    Filippitzi, M. E.; Kruse, Amanda Brinch; Postma, M.

    2018-01-01

    This study aimed to review the transmission routes of important infectious pig diseases and to translate these into biosecurity measures preventing or reducing the transmission between and within pig herds. Furthermore, it aimed to identify the level of implementation of these measures in different...... European countries and discuss the observed variations to identify potentials for improvement. First, a literature review was performed to show which direct and indirect transmission routes of 24 infectious pig diseases can be prevented through different biosecurity measures. Second, a quantitative...... on biosecurity since 1971 in Denmark. However, the observed pattern may also be attributed to differences in data collection methods. The qualitative analysis identified differences in applied policies, legislation, disease status, pig farm density, farming culture and habits between countries that can be used...

  19. Nuclear Measurement Technologies and Solutions Implemented during Nuclear Accident at Fukushima

    International Nuclear Information System (INIS)

    Morichi, M.; Toubon, H.; Bronson, Frazier; Venkataraman, Ram; Beaujoin, J.; Dubart, P.

    2013-06-01

    Fukushima accident imposed a stretch to nuclear measurement operational approach requiring in such emergency situation: fast concept development, fast system integration, deployment and start-up in a very short time frame. This paper is describing the Nuclear Measurement that AREVA-BUNM (CANBERRA) has realized and foresight at Fukushima accident site describing the technical solution conceived developed and deployed at Fukushima NPP for the process control of the treatment system of contaminated water. A detailed description of all levels design choices, from detection technologies to system architecture is offer in the paper as well as the read-out and global data management system. This paper describes also the technical choices executed and put in place to overcome the challenges related to the high radiological contamination on site. (authors)

  20. Current use and barriers and facilitators for implementation of standardised measures in physical therapy in the Netherlands

    Directory of Open Access Journals (Sweden)

    Wittink Harriet

    2011-05-01

    Full Text Available Abstract Background In many countries, the need for physical therapists to use standardised measures has been recognised and is recommended in clinical practice guidelines. Research has shown a lack of clinimetric knowledge and clinical application of measurement instruments in daily practice may hamper implementation of these guidelines. Objectives The aims of our study were a to investigate the current use of measurement instruments by Dutch physical therapists; b to investigate the facilitators and barriers in using measurement instruments. Methods To get a complete and valid overview of relevant barriers and facilitators, different methods of data collection were used. We conducted a literature search, semi-structured interviews with 20 physical therapists and an online survey. Results Facilitators are the fact that most therapists indicated a positive attitude and were convinced of the advantages of the use of measurement instruments. The most important barriers to the use of measurement instruments included physical therapists' competence and problems in changing behaviour, practice organisation (no room; no time and the unavailability and feasibility of measurement instruments. Furthermore, physical therapists indicated the need to have a core set of measurement instruments with a short user's instruction on application, scoring and interpretation. Conclusions The main barriers are on the level of the physical therapist (lack of knowledge; not focusing on the use of outcome measures and organisation (lack of time; availability; lack of management support. There seems to be a disparity between what physical therapists say and what they do. The majority of participating physical therapists indicated a positive attitude and were convinced of the advantages of the use of measurement instruments. However, the main problem for physical therapists is when to use which instrument for what patient (lack of knowledge. Furthermore, physical

  1. Research on the Implementation of Technological Measures for Controlling Indoor Environmental Quality in Green Residential Buildings

    Science.gov (United States)

    Wang, Ruozhu; Liu, Pengda; Qian, Yongmei

    2018-02-01

    This paper analyzes the design technology of controlling indoor quality in engineering practice, it is proposed that, in framework system of green residential building design, how to realize the design idea of controlling the indoor environment quality, and the design technology with feasibility, including the sunshine and lighting, indoor air quality and thermal environment, sound insulation and noise reduction measures, etc.. The results of all will provide a good theoretical supportting for the design of green residential building.

  2. Circuit Design and Implementation of Micro-Displacement Measurement System of Laser Self-Mixing Interference

    Directory of Open Access Journals (Sweden)

    Guang Ya LIU

    2014-02-01

    Full Text Available In this paper we put forward the basic structure of a micro-displacement measuring system based on the basic theory of laser feedback, and designed a hardware circuit of the system, including the LD driver and modulation circuit, photoelectric signal amplifier and filter circuit, which meet the requirements of the follow-up experimental study by theoretical analysis and Multisim simulation to the circuit.

  3. A Performance Measurement and Implementation Methodology in a Department of Defense CIM (Computer Integrated Manufacturing) Environment

    Science.gov (United States)

    1988-01-24

    vanes.-The new facility is currently being called the Engine Blade/ Vape Facility (EB/VF). There are three primary goals in automating this proc..e...earlier, the search led primarily into the areas of CIM Justification, Automation Strategies , Performance Measurement, and Integration issues. Of...of living, has been steadily eroding. One dangerous trend that has developed in keenly competitive world markets , says Rohan [33], has been for U.S

  4. Realization of the Zone Length Measurement during Zone Refining Process via Implementation of an Infrared Camera

    Directory of Open Access Journals (Sweden)

    Danilo C. Curtolo

    2018-05-01

    Full Text Available Zone refining, as the currently most common industrial process to attain ultrapure metals, is influenced by a variety of factors. One of these parameters, the so-called “zone length”, affects not only the ultimate concentration distribution of impurities, but also the rate at which this distribution is approached. This important parameter has however neither been investigated experimentally, nor ever varied for the purpose of optimization. This lack of detections may be due to the difficult temperature measurement of a moving molten area in a vacuum system, of which the zone refining methodology is comprised. Up to now, numerical simulation as a combination of complex mathematical calculations, as well as many assumptions has been the only way to reveal it. This paper aims to propose an experimental method to accurately measure the molten zone length and to extract helpful information on the thermal gradient, temperature profile and real growth rate in the zone refining of an exemplary metal, in this case aluminum. This thermographic method is based on the measurement of the molten surface temperature via an infrared camera, as well as further data analysis through the mathematical software MATLAB. The obtained results show great correlation with the visual observations of zone length and provide helpful information to determine the thermal gradient and real growth rate during the whole process. The investigations in this paper approved the application of an infrared camera for this purpose as a promising technique to automatically control the zone length during a zone refining process.

  5. The Hazardous Drinking Games Measure (HDGM): A multi-site implementation

    Science.gov (United States)

    Borsari, Brian; Peterson, Colleen; Zamboanga, Byron L.; Correia, Christopher J.; Olthuis, Janine V.; Ham, Lindsay S.; Grossbard, Joel

    2014-01-01

    Background Drinking game participation has been associated with increased frequency and quantity of alcohol use, as well as alcohol-related problems, in college students. To date, the assessment of drinking games typically entails the use of self-developed measures of frequency of participation and amount of alcohol consumed while playing. Objectives The Hazardous Drinking Games Measure (HDGM) is the first effort to create a comprehensive yet concise method of assessing drinking game participation. The HDGM assesses drinking during games, the specific types of drinking games played, and negative consequences experienced as a result of playing drinking games. Method Data from three samples of college students (n = 1002) who completed the HDGM and other self-report questionnaires of drinking behaviors were used for exploratory analyses. Results Exploratory analyses suggest that the HDGM adequately captures the nuances of drinking game participation in this population and demonstrates initial evidence of good content and criterion-related validity and test-retest reliability. However, the HDGM did not predict risky drinking above and beyond standard measures of drinks per week and alcohol-related problems in any samples. Conclusion The HDGM may be useful for campus-wide assessment of drinking games and as a source of game-specific feedback when integrated into campus prevention and intervention efforts. PMID:25192208

  6. Implementation of dynamic cross-talk correction (DCTC) for MOX holdup assay measurements among multiple gloveboxes

    International Nuclear Information System (INIS)

    Nakamichi, Hideo; Nakamura, Hironobu; Mukai, Yasunobu; Kurita, Tsutomu; Beddingfield, David H.

    2012-01-01

    Plutonium holdup in gloveboxes (GBs) are measured by (passive neutron based NDA (HBAS) for the material control and accountancy (MC and A) at Plutonium Conversion Development Facility (PCDF). In the case that the GBs are installed close to one another, the cross-talk which means neutron double counting among GBs should be corrected properly. Though we used to use predetermined constants as the cross-talk correction, a new correction methodology for neutron cross-talk among the GBs with inventory changes is required for the improvement of MC and A. In order to address the issue of variable cross-talk contributions to holdup assay values, we applied a dynamic cross-talk correction (DCTC) method, based on the distributed source-term analysis approach, to obtain the actual doubles derived from the cross-talk between multiple GBs. As a result of introduction of DCTC for HBAS measurement, we could reduce source biases from the assay result by estimating the reliable doubles-counting derived from the cross-talk. Therefore, we could improve HBAS measurement uncertainty to a half of conventional system, and we are going to confirm the result. Since the DCTC methodology can be used to determine the cross-correlation among multiple inventories in small areas, it is expected that this methodology can be extended to the knowledge of safeguards by design. (author)

  7. Binding properties of a blood group Le(a+) active sialoglycoprotein, purified from human ovarian cyst, with applied lectins.

    Science.gov (United States)

    Wu, A M; WU, J H; Watkins, W M; Chen, C P; Tsai, M C

    1996-06-07

    Studies on the structures and binding properties of the glycoproteins, purified from human ovarian cyst fluids, will aid the understanding of the carbohydrate alterations occurring during the biosynthesis of blood group antigens and neoplasm formation. These glycoproteins can also serve as important biological materials to study blood group A, B, H, Le(a), Le(b), Le(x), Le(y), T and Tn determinants, precursor type I and II sequences and cold agglutinin I and i epitopes. In this study, the binding property of a cyst glycoprotein from a human blood group Le(a+) nonsecretor individual, that contains an unusually high amount (18%) of sialic acid (HOC 350) was characterized by quantitative precipitin assay with a panel of lectins exhibiting a broad range of carbohydrate-binding specificities. Native HOC 350 reacted well only with three out of nineteen lectins tested. It precipitated about 80% of Ricinus communis (RCA1), 50% of Triticum vulgaris (WGA) and 37% of Bauhinia purpurea aba (BPA) agglutinins, respectively. However, its asialo product had dramatically enhanced reactivity and reacted well with many I/II (Gal beta1 --> 3/4GcNAc), T(Gal beta1 --> 3GalNAc) and Tn(GaNIAc alphaI --> Ser/Thr) active lectins. It bound best to Jacalin, BPA, and abrin-a and completely precipitated all the lectins added. Asialo-HOC 350 also reacted strongly with Wistaria floribunda, Abrus precatorius agglutinin, ricin and RCA1 and precipitated over 75% of the lectin nitrogen added, and moderately with Arachis hypogaea, Maclura pomifera, WGA, Vicia viosa-B4, Codium fragile tomentosoides and Ulex europaeus-II. But native HOC 350 and its asialo product reacted not at all or poorly with Dolichos biflorus, Helix pomatia, Lotus tetra-gonolobus, Ulex europaeus-I, Lens culinaris lectins and Con A. The lectin-glycoform interactions through bioactive sugars were confirmed by precipitin inhibition assay. Mapping the precipitation profiles of the interactions have led to the conclusion that HOC 350

  8. National measures required by the implementation of the climate convention and the Kyoto Protocol in Finland. Report by the Committee on National Climate Policy Measures

    International Nuclear Information System (INIS)

    2002-12-01

    The task of the Committee was to develop the administrative framework for the national measures that the UN Climate Convention and the implementation of the Kyoto Protocol require in Finland. The Committee proposes that a ministerial working group should continue to act in the Government to draft and implement the climate policy, assisted by a contact network representing the central ministries. The Committee recommends that Finland should have a national climate strategy that would be updated at two or three year's intervals. The drafting, implementation and monitoring of the Climate Strategy should be under the steering of the ministerial working group. In drafting and implementation of the strategy, the responsible ministry would be the one whose minister is the Chairman of the ministerial working group. The evaluation reports on the impacts of policy measures reducing greenhouse gases would be drawn up as part of the strategy's implementation. The Ministry of Trade and Industry would coordinate the scenarios that examine greenhouse gas emissions and that are required by the climate policy in practice. The drafting of the scenarios would be steered by the ministerial working group assisted by a contact network Expert institutions would participate both in the drafting and implementation of the strategy and in the follow-up of the implementation by producing the necessary surveys. In the Committee's opinion, international climate negotiations should still be under the drafting responsibility of the Ministry of the Environment. The Committee suggests that Statistics Finland should be appointed as the inventory entity of greenhouse gases and that a temporary steering group chaired by the Ministry of the Environment, representing all the central ministries and expert institutes, should be set up to assist and steer the national system calculating greenhouse gas emissions. The initial distribution according to the proposal for an EC Directive on emissions trading

  9. Peripheral dose measurement in high-energy photon radiotherapy with the implementation of MOSFET.

    Science.gov (United States)

    Vlachopoulou, Vassiliki; Malatara, Georgia; Delis, Harry; Theodorou, Kiki; Kardamakis, Dimitrios; Panayiotakis, George

    2010-11-28

    To study the peripheral dose (PD) from high-energy photon beams in radiotherapy using the metal oxide semiconductor field effect transistor (MOSFET) dose verification system. The radiation dose absorbed by the MOSFET detector was calculated taking into account the manufacturer's Correction Factor, the Calibration Factor and the threshold voltage shift. PD measurements were carried out for three different field sizes (5 cm × 5 cm, 10 cm × 10 cm and 15 cm × 15 cm) and for various depths with the source to surface distance set at 100 cm. Dose measurements were realized on the central axis and then at distances (1 to 18 cm) parallel to the edge of the field, and were expressed as the percentage PD (% PD) with respect to the maximum dose (d(max)). The accuracy of the results was evaluated with respect to a calibrated 0.3 cm(3) ionization chamber. The reproducibility was expressed in terms of standard deviation (s) and coefficient of variation. % PD is higher near the phantom surface and drops to a minimum at the depth of d(max), and then tends to become constant with depth. Internal scatter radiation is the predominant source of PD and the depth dependence is determined by the attenuation of the primary photons. Closer to the field edge, where internal scatter from the phantom dominates, the % PD increases with depth because the ratio of the scatter to primary increases with depth. A few centimeters away from the field, where collimator scatter and leakage dominate, the % PD decreases with depth, due to attenuation by the water. The % PD decreases almost exponentially with the increase of distance from the field edge. The decrease of the % PD is more than 60% and can reach up to 90% as the measurement point departs from the edge of the field. For a given distance, the % PD is significantly higher for larger field sizes, due to the increase of the scattering volume. Finally, the measured PD obtained with MOSFET is higher than that obtained with an ionization chamber

  10. THE USE OF MARKETING INDICATORS TO MEASURE AND MONITOR THE EFFECTS OF IMPLEMENTING THE CONCEPT OF USER-DRIVEN INNOVATION

    Directory of Open Access Journals (Sweden)

    Marzena Krawczyk

    2014-04-01

    Full Text Available The importance of users as a source of information for company innovation activity was raised in the 1980s by von Hippel. Today, a concept of a similar basis is known and developed in Europe under the name of User-Driven Innovation (UDI. The UDI is based on the belief that enterprises which are able to create, often in close cooperation with customers, products and services with features desired by users will survive in the market. In order to achieve the above, companies are trying to identify the hidden, often unconscious, needs of users, in order to try to meet these needs (UDI - Consumer Voice or implement ready-made innovative solutions attributed to consumers (UDI - Consumer Leadership (Warzybok, et al., 2008; NORDEN, 2006. Due to the growing significance of users as a source of information for innovation activities it is important to find measures which could assess the impact of this source on company innovativeness (Krawczyk, 2013b. The aim of this paper is to show that marketing indicators focused on measuring the relationship with customers can be used to measure the effects of implementation of UDI in innovative companies.

  11. Radiological Protection Measurements Implemented during the 16. Pan American and 4. ParaPan American Games: Guadalajara, Mexico, 2011

    International Nuclear Information System (INIS)

    2014-02-01

    Terrorism remains a threat to international stability and security. Often national and international high level public events are the subject of much public interest and receive extensive coverage in the media. In this sense, it is well known that there is a real threat of a terrorist attack in important public events, such as major economic summits, high level political meetings or sporting events. In 1955 and 1975, the 2nd and 7th Pan American Games were organized by the City of Mexico. In 2011, the Pan American Games was the third event of its kind held in Guadalajara, Jalisco. At the national level, the implementation of nuclear security measures in the Pan American Games laid the foundations for a sustainable national nuclear security framework that will continue long after the event. The political decision, the existing legal basis and structure, agency coordination facilitated the incorporation of nuclear security measures. It was also a challenge to integrate all the relevant organizations, provide focus to the threat of terrorism linked to weapons of mass destruction for security games, plan resources and execute the project on time, among other details. For this reason, information and lessons learned that are reported in this document, received in Mexico during the 16th edition of the Pan American Games will be useful for the implementation of nuclear security measures in States with similar situations

  12. An Implementation of Error Minimization Position Estimate in Wireless Inertial Measurement Unit using Modification ZUPT

    Directory of Open Access Journals (Sweden)

    Adytia Darmawan

    2016-12-01

    Full Text Available Position estimation using WIMU (Wireless Inertial Measurement Unit is one of emerging technology in the field of indoor positioning systems. WIMU can detect movement and does not depend on GPS signals. The position is then estimated using a modified ZUPT (Zero Velocity Update method that was using Filter Magnitude Acceleration (FMA, Variance Magnitude Acceleration (VMA and Angular Rate (AR estimation. Performance of this method was justified on a six-legged robot navigation system. Experimental result shows that the combination of VMA-AR gives the best position estimation.

  13. Measuring efficiency of lean six sigma project implementation using data envelopment analysis at Nasa

    Directory of Open Access Journals (Sweden)

    David Meza

    2013-06-01

    Full Text Available Purpose: This study aims to review the implementation of the Lean Six Sigma project methodology in the Johnson Space Center (JSC business environment of National Aeronautics and Space Administration (NASA with an objective of evaluating performance of individual projects and to develop recommendation for strategies to improve operational efficiencies based on Data Envelopment Analysis (DEA.Design/methodology/approach: In this study, authors propose the Lean Six Sigma project performance evaluation model (LSS-PPEM based on Data DEA where Critical Success Factors (CSFs and Total Team Hours serve as inputs while Process Sigma and Cost avoidance are used as outputs. The CSFs are factors that critically affect the performance of LSS at JSC. Six of those are identified by the Black Belts through Analytical Hierarchical Process, and the values of those are decided by project leaders and Green Belts through survey. Eighteen LSS projects are evaluated, and their results are analyzed.Findings and Originality/value: Eventually, four out of the six CSFs are adopted for this study based upon Pearson correlation analysis, and those four include Project execution and follow up of results; Top management’s commitment and participation; The use of data analysis with easily obtainable data; Attention given to both long and short term targets. Using data between the years 2009 and 2011, seven of the eighteen projects are found to be efficient. The benchmark analysis and slack analysis are conducted to provide further recommendation for JSC managers. Three out of those seven efficient projects are most frequently used as an efficient peer.Practical implications: Traditionally, DEA has been considered as a data-driven approach. In this study, authors incorporate the survey-based CSFs into the DEA frame. Since many organizations may have different CSFs, the framework presented in this study can be easily applied to other organizations.Originality/value: This study

  14. Implementing and measuring the level of laboratory service integration in a program setting in Nigeria.

    Science.gov (United States)

    Mbah, Henry; Negedu-Momoh, Olubunmi Ruth; Adedokun, Oluwasanmi; Ikani, Patrick Anibbe; Balogun, Oluseyi; Sanwo, Olusola; Ochei, Kingsley; Ekanem, Maurice; Torpey, Kwasi

    2014-01-01

    The surge of donor funds to fight HIV&AIDS epidemic inadvertently resulted in the setup of laboratories as parallel structures to rapidly respond to the identified need. However these parallel structures are a threat to the existing fragile laboratory systems. Laboratory service integration is critical to remedy this situation. This paper describes an approach to quantitatively measure and track integration of HIV-related laboratory services into the mainstream laboratory services and highlight some key intervention steps taken, to enhance service integration. A quantitative before-and-after study conducted in 122 Family Health International (FHI360) supported health facilities across Nigeria. A minimum service package was identified including management structure; trainings; equipment utilization and maintenance; information, commodity and quality management for laboratory integration. A check list was used to assess facilities at baseline and 3 months follow-up. Level of integration was assessed on an ordinal scale (0 = no integration, 1 = partial integration, 2 = full integration) for each service package. A composite score grading expressed as a percentage of total obtainable score of 14 was defined and used to classify facilities (≤ 80% FULL, 25% to 79% PARTIAL and laboratory systems were 64 (52.5%) and 0 (0.0%) at baseline, compared to 100 (82.0%) and 3 (2.4%) respectively at 3 months follow-up (p = 0.000). This project showcases our novel approach to measure the status of each laboratory on the integration continuum.

  15. Implementation of an Educational Cartoon ("the Patchbook") and Other Compliance-Enhancing Measures by Orthoptists in Occlusion Treatment of Amblyopia.

    Science.gov (United States)

    Tjiam, A M; Asjes-Tydeman, W L; Holtslag, G; Vukovic, E; Sinoo, M M; Loudon, S E; Passchier, J; de Koning, H J; Simonsz, H J

    2016-09-01

    This implementation study evaluated orthoptists' use of an educational cartoon ("the Patchbook") and other measures to improve compliance with occlusion therapy for amblyopia. Participating orthoptists provided standard orthoptic care for one year, adding the Patchbook in the second year. They attended courses on compliance and intercultural communication by communication skills training. Many other compliance-enhancing measures were initiated. Orthoptists' awareness, attitude, and activities regarding noncompliance were assessed through interviews, questionnaires, and observations. Their use of the Patchbook was measured. The study was performed in low socio-economic status (SES) areas and in other areas in the Netherlands. It was attempted to integrate education on compliance into basic and continuing orthoptic training. The Patchbook was used by all 9 orthoptists who participated in low-SES areas and 17 of 23 orthoptists in other areas. Courses changed awareness and attitude about compliance, but this was not sustained. Although orthoptists estimated compliance during patching at 70%, three-quarters never suspected noncompliance during a full day of observation in any of their patients. Explanations to parents who spoke Dutch poorly were short. In the second year, explanations to children were longer. Implementation of all 7 additional compliance-enhancing measures failed. Education on compliance was not integrated into orthoptists' training. Almost all orthoptists used the Patchbook and, as another study demonstrated, it proved to be very effective, especially in low-SES areas. Duration of explanation was inversely proportional to parents' fluency in Dutch. Noncompliance was rarely suspected by orthoptists. Although 7 additional compliance-enhancing measures had been conceived and planned with the best intentions, they were not realized. These required extra, unpaid time from the orthoptists, which is especially scarce in hospitals in low-SES areas where the

  16. Critical report of current fisheries management measures implemented for the North Sea mixed demersal fisheries

    DEFF Research Database (Denmark)

    Nielsen, J. Rasmus; Ulrich, Clara; Hegland, Troels J.

    the scientific advice, the development in recent years has been towards this gap being reduced. Management of the fisheries has undergone a number of structural and behavioral changes, and these have already yielded some positive results as the state of the demersal stocks in the North Sea have globally improved......, at least in the prosperous countries around the North Sea, provides only few jobs. Despite the above trends indicating positive effects of the most recent fisheries management of the North Sea mixed demersal fisheries there are a row of general problems in the present management. Population dynamics...... states’ ministers in the Council have exercised strong control over the fisheries management measures which have been developed and adopted on the background of proposals from the Commission and the Parliament, though since the ratification of the Lisbon Treaty the Parliament has assumed a role of co...

  17. FPGA-based real-time phase measuring profilometry algorithm design and implementation

    Science.gov (United States)

    Zhan, Guomin; Tang, Hongwei; Zhong, Kai; Li, Zhongwei; Shi, Yusheng

    2016-11-01

    Phase measuring profilometry (PMP) has been widely used in many fields, like Computer Aided Verification (CAV), Flexible Manufacturing System (FMS) et al. High frame-rate (HFR) real-time vision-based feedback control will be a common demands in near future. However, the instruction time delay in the computer caused by numerous repetitive operations greatly limit the efficiency of data processing. FPGA has the advantages of pipeline architecture and parallel execution, and it fit for handling PMP algorithm. In this paper, we design a fully pipelined hardware architecture for PMP. The functions of hardware architecture includes rectification, phase calculation, phase shifting, and stereo matching. The experiment verified the performance of this method, and the factors that may influence the computation accuracy was analyzed.

  18. Implementing the ban on smoking in Israeli pubs: measuring airborne nicotine and enforcement by local authorities.

    Science.gov (United States)

    Satran, Carmit; Drach-Zahavy, Anat; Hammond, S Katharine; Baron-Epel, Orna

    2014-06-01

    In 2007 an amendment to the law restricting smoking in pubs and bars (P&Bs) was enacted in Israel. However, a year after the ban only slight decreases in airborne smoke in P&Bs in one city have been reported. We aimed to assess levels of airborne nicotine in Israeli P&Bs and to measure ifself-reported enforcement of the law by local officials was associated with levels of airborne nicotine in P&Bs. Airborne nicotine levels were measured in 72 P&Bs in 29 towns in Israel; this consisted of 90% of eligible towns. In addition, 73 local authority officials were interviewed in 25 of these towns. The officials were asked to assess the local authority's level of enforcement of the law banning smoking in P&Bs. The association of levels of airborne nicotine with the levels of enforcement of the law was calculated. Data were collected during 2009-2010 and analyzed in 2010-2011. Levels of airborne nicotine were comparatively high in P&Bs. No association was detected between levels of nicotine and the P&Bs' characteristics. In the larger towns, levels of airborne nicotine were higher. In 16% of towns the local authority officials reported high levels of law enforcement. Generally, levels of reported enforcement by local authorities were low and did not predict levels of airborne nicotine in the P&Bs. Self-reported local authorities' law enforcement was not associated with levels of airborne nicotine in P&Bs in these towns. There is a need to develop ways to increase law enforcement by the local authorities or other agencies.

  19. Political factors in the development and implementation of technology-based confidence-building measures

    International Nuclear Information System (INIS)

    Steinberg, G.M.

    1989-01-01

    The second half of the 20th century has been characterized by the continuous development and improvement of weapons of mass destruction, including strategic bombers, missiles, chemical and biological agents, and of course, a variety of nuclear weapons. In contrast to the massive change in military capabilities brought about by the rapid development of science and technology, international relations is still dominated by relations between sovereign nation states and characterized by distrust and narrow interests. At the same time that scientific developments created the foundation for the nuclear arms race, however the scientific and technical community has also sought some antidotes. Technology-based confidence building measures (TBCBMS), designed to reduce international conflict and to prevent nuclear war, have been proposed by scientists from the US and the USSR. These TBCBMS have taken a number of forms such as cooperative research and development programs, joint panels and meetings of professional societies, and specially dedicated international forums. These have provided a meeting ground for the exchange of views among scientists from many different countries. In addition, a number of more direct forms of TBCBMS, such as satellite-based observation systems and IAEA nuclear safeguards, have national technical means of verification. More recently, there have been a number of proposals to apply many of these technologies to verification of conventional force reduction, arms control, and other confidence-building measures in context of regional conflicts in the Third World. An International Satellite Monitoring Agency has bee proposed to develop space-based technologies such as observation satellites to increase stability and prevent the outbreak of accidental war in regional contexts such as the Middle East

  20. Implementing and measuring the level of laboratory service integration in a program setting in Nigeria.

    Directory of Open Access Journals (Sweden)

    Henry Mbah

    Full Text Available The surge of donor funds to fight HIV&AIDS epidemic inadvertently resulted in the setup of laboratories as parallel structures to rapidly respond to the identified need. However these parallel structures are a threat to the existing fragile laboratory systems. Laboratory service integration is critical to remedy this situation. This paper describes an approach to quantitatively measure and track integration of HIV-related laboratory services into the mainstream laboratory services and highlight some key intervention steps taken, to enhance service integration.A quantitative before-and-after study conducted in 122 Family Health International (FHI360 supported health facilities across Nigeria. A minimum service package was identified including management structure; trainings; equipment utilization and maintenance; information, commodity and quality management for laboratory integration. A check list was used to assess facilities at baseline and 3 months follow-up. Level of integration was assessed on an ordinal scale (0 = no integration, 1 = partial integration, 2 = full integration for each service package. A composite score grading expressed as a percentage of total obtainable score of 14 was defined and used to classify facilities (≤ 80% FULL, 25% to 79% PARTIAL and <25% NO integration. Weaknesses were noted and addressed.We analyzed 9 (7.4% primary, 104 (85.2% secondary and 9 (7.4% tertiary level facilities. There were statistically significant differences in integration levels between baseline and 3 months follow-up period (p<0.01. Baseline median total integration score was 4 (IQR 3 to 5 compared to 7 (IQR 4 to 9 at 3 months follow-up (p = 0.000. Partial and fully integrated laboratory systems were 64 (52.5% and 0 (0.0% at baseline, compared to 100 (82.0% and 3 (2.4% respectively at 3 months follow-up (p = 0.000.This project showcases our novel approach to measure the status of each laboratory on the integration continuum.

  1. Genome-Wide Analysis of a TaLEA-Introduced Transgenic Populus simonii × Populus nigra Dwarf Mutant

    Directory of Open Access Journals (Sweden)

    Jing Jiang

    2012-03-01

    Full Text Available A dwarf mutant (dwf1 was obtained among 15 transgenic lines, when TaLEA (Tamarix androssowii late embryogenesis abundant gene was introduced into Populus simonii × Populus nigra by Agrobacterium tumefaciens-mediated transformation. Under the same growth conditions, dwf1 height was significantly reduced compared with the wild type and the other transgenic lines. Because only one transgenic line (dwf1 displayed the dwarf phenotype, we considered that T-DNA insertion sites may play a role in the mutant formation. The mechanisms underlying this effect were investigated using TAIL-PCR (thermal asymmetric interlaced PCR and microarrays methods. According to the TAIL-PCR results, two flanking sequences located on chromosome IV and VIII respectively, were cloned. The results indicated the integration of two independent T-DNA copies. We searched for the potential genes near to the T-DNA insertions. The nearest gene was a putative poplar AP2 transcription factor (GI: 224073210. Expression analysis showed that AP2 was up-regulated in dwf1 compared with the wild type and the other transgenic lines. According to the microarrays results, a total of 537 genes involved in hydrolase, kinase and transcription factor activities, as well as protein and nucleotide binding, showed significant alterations in gene expression. These genes were expressed in more than 60 metabolic pathways, including starch, sucrose, galactose and glycerolipid metabolism and phenylpropanoids and flavonoid biosyntheses. Our transcriptome and T-DNA insertion sites analyses might provide some useful insights into the dwarf mutant formation.

  2. Potential for improved radiation thermometry measurement uncertainty through implementing a primary scale in an industrial laboratory

    Science.gov (United States)

    Willmott, Jon R.; Lowe, David; Broughton, Mick; White, Ben S.; Machin, Graham

    2016-09-01

    A primary temperature scale requires realising a unit in terms of its definition. For high temperature radiation thermometry in terms of the International Temperature Scale of 1990 this means extrapolating from the signal measured at the freezing temperature of gold, silver or copper using Planck’s radiation law. The difficulty in doing this means that primary scales above 1000 °C require specialist equipment and careful characterisation in order to achieve the extrapolation with sufficient accuracy. As such, maintenance of the scale at high temperatures is usually only practicable for National Metrology Institutes, and calibration laboratories have to rely on a scale calibrated against transfer standards. At lower temperatures it is practicable for an industrial calibration laboratory to have its own primary temperature scale, which reduces the number of steps between the primary scale and end user. Proposed changes to the SI that will introduce internationally accepted high temperature reference standards might make it practicable to have a primary high temperature scale in a calibration laboratory. In this study such a scale was established by calibrating radiation thermometers directly to high temperature reference standards. The possible reduction in uncertainty to an end user as a result of the reduced calibration chain was evaluated.

  3. Outcome-centered antiepileptic therapy: Rate, rhythm and relief.: Implementing AAN Epilepsy Quality Measures in clinical practice.

    Science.gov (United States)

    D'Cruz, O'Neill

    2015-12-01

    Clinicians who manage patients with epilepsy are expected to assess the relevance of clinical trial results to their practice, integrate new treatments into the care algorithm, and implement epilepsy quality measures, with the overall goal of improving patient outcomes. A disease-based clinical framework that helps with choice and combinations of interventions facilitates provision of efficient, cost-effective, and high-quality care. This article addresses the current conceptual framework that informs clinical evaluation of epilepsy, explores gaps between development of treatment options, quality measures and clinical goals, and proposes an outcome-centered approach that bridges these gaps with the aim of improving patient and population-level clinical outcomes in epilepsy. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

  4. Implementation of electron beam position measurement algorithm and embedded web server using MCS-51 microcontroller for Booster Synchrotron

    International Nuclear Information System (INIS)

    Shrivastava, B.B.; Chouhan, Manish; Puntambekar, T.A.; Tiwari, A.N.

    2015-01-01

    The Booster Synchrotron at RRCAT caters as Injector Machine for Indus-1 and Indus-2 with the repetition rate of 1Hz. In Booster Synchrotron, energy of electron bunches are increased from 20 MeV to 450 MeV (in ∼ 280 ms) and 550 MeV (in ∼ 340 ms ) for Indus-1 and Indus-2 respectively. An algorithm for microcontroller based beam position measurement system has been developed for the Booster Synchrotron to measure the fast changes in the beam position of electron bunches during energy ramping. In this paper, software implementation in microcontroller and its optimization to achieve beam position update rate of 1 kHz is discussed. (author)

  5. Resilience of Infrastructure Systems to Sea-Level Rise in Coastal Areas: Impacts, Adaptation Measures, and Implementation Challenges

    Directory of Open Access Journals (Sweden)

    Beatriz Azevedo de Almeida

    2016-11-01

    Full Text Available Expansive areas of low elevation in many densely populated coastal areas are at elevated risk of storm surges and flooding due to torrential precipitation, as a result of sea level rise. These phenomena could have catastrophic impacts on coastal communities and result in the destruction of critical infrastructure, disruption of economic activities and salt water contamination of the water supply. The objective of the study presented in this paper was to identify various impacts of sea level rise on civil infrastructures in coastal areas and examine the adaptation measures suggested in the existing literature. To this end, a systemic review of the existing literature was conducted in order to identify a repository of studies addressing sea level rise impacts and adaptation measures in the context of infrastructure systems. The study focused on three infrastructure sectors: water and wastewater, energy, and road transportation. The collected information was then analyzed in order to identify different categories of sea level rise impacts and corresponding adaptation measures. The findings of the study are threefold: (1 the major categories of sea level rise impacts on different infrastructure systems; (2 measures for protection, accommodation, and retreat in response to sea level rise impacts; and (3 challenges related to implementing adaptation measures.

  6. Review of transmission routes of 24 infectious diseases preventable by biosecurity measures and comparison of the implementation of these measures in pig herds in six European countries.

    Science.gov (United States)

    Filippitzi, M E; Brinch Kruse, A; Postma, M; Sarrazin, S; Maes, D; Alban, L; Nielsen, L R; Dewulf, J

    2018-04-01

    This study aimed to review the transmission routes of important infectious pig diseases and to translate these into biosecurity measures preventing or reducing the transmission between and within pig herds. Furthermore, it aimed to identify the level of implementation of these measures in different European countries and discuss the observed variations to identify potentials for improvement. First, a literature review was performed to show which direct and indirect transmission routes of 24 infectious pig diseases can be prevented through different biosecurity measures. Second, a quantitative analysis was performed using the Biocheck.UGent™, a risk-based scoring system to evaluate biosecurity in pig herds, to obtain an insight into the implementation of these biosecurity measures. The database contained farm-specific biosecurity data from 574 pig farms in Belgium, Denmark, France, Germany, the Netherlands and Sweden, entered between January 2014 and January 2016. Third, a qualitative analysis based on a review of literature and other relevant information resources was performed for every subcategory of internal and external biosecurity in the Biocheck.UGent™ questionnaire. The quantitative analysis indicated that at the level of internal, external and overall biosecurity, Denmark had a significantly distinct profile with higher external biosecurity scores and less variation than the rest of the countries. This is likely due to a widely used specific pathogen-free (SPF) system with extensive focus on biosecurity since 1971 in Denmark. However, the observed pattern may also be attributed to differences in data collection methods. The qualitative analysis identified differences in applied policies, legislation, disease status, pig farm density, farming culture and habits between countries that can be used for shaping country-specific biosecurity advice to attain improved prevention and control of important pig diseases in European pig farms. © 2017 Blackwell

  7. The Relationship Between Implementation of School-Wide Positive Behavior Intervention and Supports and Performance on State Accountability Measures

    Directory of Open Access Journals (Sweden)

    Adriana M. Marin

    2013-10-01

    Full Text Available This study examined data from 96 schools in a Southeastern U.S. state participating in training and/or coaching on School-Wide Positive Behavioral Interventions and Supports (SWPBIS provided by the State Personnel Development Grant (SPDG in their state. Schools studied either received training only (“non-intensive” sites or training and on-site coaching (“intensive” sites. Fidelity of implementation was self-evaluated by both types of schools using the Benchmarks of Quality (BOQ. Some schools were also externally evaluated using the School-Wide Evaluation Tool (SET, with those scoring 80% or higher determined “model sites.” Using an independent sample t-test, analyses revealed statistically significant differences between intensive and nonintensive schools’ Quality of Distribution Index (QDI scores and between model sites and nonmodel sites on QDI scores. Correlations were performed to determine whether the fidelity of implementation of SWPBIS as measured by the BOQ was related to any of the state’s accountability measures: performance classification, QDI, or growth.

  8. Implementation and Development of the Incremental Hole Drilling Method for the Measurement of Residual Stress in Thermal Spray Coatings

    Science.gov (United States)

    Valente, T.; Bartuli, C.; Sebastiani, M.; Loreto, A.

    2005-12-01

    The experimental measurement of residual stresses originating within thick coatings deposited by thermal spray on solid substrates plays a role of fundamental relevance in the preliminary stages of coating design and process parameters optimization. The hole-drilling method is a versatile and widely used technique for the experimental determination of residual stress in the most superficial layers of a solid body. The consolidated procedure, however, can only be implemented for metallic bulk materials or for homogeneous, linear elastic, and isotropic materials. The main objective of the present investigation was to adapt the experimental method to the measurement of stress fields built up in ceramic coatings/metallic bonding layers structures manufactured by plasma spray deposition. A finite element calculation procedure was implemented to identify the calibration coefficients necessary to take into account the elastic modulus discontinuities that characterize the layered structure through its thickness. Experimental adjustments were then proposed to overcome problems related to the low thermal conductivity of the coatings. The number of calculation steps and experimental drilling steps were finally optimized.

  9. Design and Implementation Content Validity Study: Development of an instrument for measuring Patient-Centered Communication

    Directory of Open Access Journals (Sweden)

    Vahid Zamanzadeh

    2015-06-01

    Full Text Available ABSTRACT Introduction: The importance of content validity in the instrument psychometric and its relevance with reliability, have made it an essential step in the instrument development. This article attempts to give an overview of the content validity process and to explain the complexity of this process by introducing an example. Methods: We carried out a methodological study conducted to examine the content validity of the patient-centered communication instrument through a two-step process (development and judgment. At the first step, domain determination, sampling (item generation and instrument formation and at the second step, content validity ratio, content validity index and modified kappa statistic was performed. Suggestions of expert panel and item impact scores are used to examine the instrument face validity. Results: From a set of 188 items, content validity process identified seven dimensions includes trust building (eight items, informational support (seven items, emotional support (five items, problem solving (seven items, patient activation (10 items, intimacy/friendship (six items and spirituality strengthening (14 items. Content validity study revealed that this instrument enjoys an appropriate level of content validity. The overall content validity index of the instrument using universal agreement approach was low; however, it can be advocated with respect to the high number of content experts that makes consensus difficult and high value of the S-CVI with the average approach, which was equal to 0.93. Conclusion: This article illustrates acceptable quantities indices for content validity a new instrument and outlines them during design and psychometrics of patient-centered communication measuring instrument.

  10. Influenza A (H1N1-2009) pandemic in Singapore--public health control measures implemented and lessons learnt.

    Science.gov (United States)

    Tay, Joanne; Ng, Yeuk Fan; Cutter, Jeffery L; James, Lyn

    2010-04-01

    We describe the public health control measures implemented in Singapore to limit the spread of influenza A (H1N1-2009) and mitigate its social effects. We also discuss the key learning points from this experience. Singapore's public health control measures were broadly divided into 2 phases: containment and mitigation. Containment strategies included the triage of febrile patients at frontline healthcare settings, admission and isolation of confirmed cases, mandatory Quarantine Orders (QO) for close contacts, and temperature screening at border entry points. After sustained community transmission became established, containment shifted to mitigation. Hospitals only admitted H1N1-2009 cases based on clinical indications, not for isolation. Mild cases were managed in the community. Contact tracing and QOs tapered off, and border temperature screening ended. The 5 key lessons learnt were: (1) Be prepared, but retain flexibility in implementing control measures; (2) Surveillance, good scientific information and operational research can increase a system's ability to manage risk during a public health crisis; (3) Integrated systems-level responses are essential for a coherent public health response; (4) Effective handling of manpower surges requires creative strategies; and (5) Communication must be strategic, timely, concise and clear. Singapore's effective response to the H1N1-2009 pandemic, founded on experience in managing the 2003 SARS epidemic, was a whole-of-government approach towards pandemic preparedness planning. Documenting the measures taken and lessons learnt provides a learning opportunity for both doctors and policy makers, and can help fortify Singapore's ability to respond to future major disease outbreaks.

  11. Reducing health care-associated infections by implementing separated environmental cleaning management measures by using disposable wipes of four colors.

    Science.gov (United States)

    Wong, Swee Siang; Huang, Cheng Hua; Yang, Chiu Chu; Hsieh, Yi Pei; Kuo, Chen Ni; Chen, Yi Ru; Chen, Li Ching

    2018-01-01

    Environmental cleaning is a fundamental principle of infection control in health care settings. We determined whether implementing separated environmental cleaning management measures in MICU reduced the density of HAI. We performed a 4-month prospective cohort intervention study between August and December 2013, at the MICU of Cathay General hospital. We arranged a training program for all the cleaning staff regarding separated environmental cleaning management measures by using disposable wipes of four colors to clean the patients' bedside areas, areas at a high risk of contamination, paperwork areas, and public areas. Fifteen high-touch surfaces were selected for cleanliness evaluation by using the adenosine triphosphate (ATP) bioluminescence test. Then data regarding HAI densities in the MICU were collected during the baseline, intervention, and late periods. A total of 120 ATP readings were obtained. The total number of clean high-touch surfaces increased from 13% to 53%, whereas that of unclean high-touch surface decreased from 47% to 20%. The densities of HAI were 14.32‰ and 14.90‰ during the baseline and intervention periods, respectively. The HAI density did not decrease after the intervention period, but it decreased to 9.07‰ during the late period. Implementing separated environmental cleaning management measures by using disposable wipes of four colors effectively improves cleanliness in MICU environments. However, no decrease in HAI density was observed within the study period. Considering that achieving high levels of hand-hygiene adherence is difficult, improving environmental cleaning is a crucial adjunctive measure for reducing the incidence of HAIs.

  12. Implementation of Ray Safe i2 System for staff dose measuring in interventional radiology

    International Nuclear Information System (INIS)

    Gershan, Vesna; Atsovska, Violeta

    2013-01-01

    Interventional radiology procedures usually delivered the highest radiation dose to the patients as well as to medical personal. Beside another factors like patient size, fluoroscopy time, machine calibration etc., a good clinical practice has strong effects to staff and patient’s radiation dose. Materials and methods: In August 2012, a Ray Safe i2 system was installed in a private hospital in Skopje. The main purpose of this dosimetry system is to provide real time indication for the current exposure level of the medical personal. Knowing that, the staff has prerequisites to adjust their behavior to minimize unnecessary exposure like changing distance from exposed volume, C-ram angulations, field of view etc. and on this way to develop a good clinical practice. The Ray Safe i2 system is consisted by ten digital dosimeters, two dock stations, real time display, dose viewer and dose manager software. During interventional procedures, each involved staff wears dosimeter which measures and records X-Ray exposure every second and transfer the data wirelessly to the real time display. Color indication bars (green, yellow, red) represents the intensity of the currently received exposure, whereas green zone indicates < 0.2 mSv/h, yellow zone from 0.2 to 2 mSv/h and red zone indications from 2 to 20 mSv/h. Additionally, accumulated dose per individual is displayed next to the color indication bars. By using the software, information about personal dose history, such as annual dose, dose per particular session, hour, day or week, can be viewed and analyzed. Results: In this work it was found that staff accumulated doses were constantly increased over time, but reported number of procedures does not correspond to this tendency. Our assumption is that there is a misleading between reported number and actual performed procedures. Doctor1 received 55 times more dose than Doctor2 and Nurse1 received 11 to 3 times more dose than another Nurses. It was found a correlation of R2

  13. High and Low Reynolds number Measurements in a Room with an Impinging Isothermal Jet

    DEFF Research Database (Denmark)

    Skovgaard, M.; Hyldgaard, C. E.; Nielsen, Peter V.

    The present paper, which is within the work of the lEA - annex 20, presents a series of full-scale velocity measurements in a room with isothermal mixing ventilation. The measurements are in the Reynolds number range 1000 - 7000 based on inlet dimensions. This means that a transition from laminar...

  14. Community Readiness Within Systems of Care: The Validity and Reliability of the System of Care Readiness and Implementation Measurement Scale (SOC-RIMS).

    Science.gov (United States)

    Rosas, Scott R; Behar, Lenore B; Hydaker, William M

    2016-01-01

    Establishing a system of care requires communities to identify ways to successfully implement strategies and support positive outcomes for children and their families. Such community transformation is complex and communities vary in terms of their readiness for implementing sustainable community interventions. Assessing community readiness and guiding implementation, specifically for the funded communities implementing a system of care, requires a well-designed tool with sound psychometric properties. This scale development study used the results of a previously published concept mapping study to create, administer, and assess the psychometric characteristics of the System of Care Readiness and Implementation Measurement Scale (SOC-RIMS). The results indicate the SOC-RIMS possesses excellent internal consistency characteristics, measures clearly discernible dimensions of community readiness, and demonstrates the target constructs exist within a broad network of content. The SOC-RIMS can be a useful part of a comprehensive assessment in communities where system of care practices, principles, and philosophies are implemented and evaluated.

  15. Development and evaluation of a questionnaire to measure the perceived implementation of the mission statement of a competency based curriculum.

    Science.gov (United States)

    Rotthoff, Thomas; Ostapczuk, Martin Stefan; de Bruin, Judith; Kröncke, Klaus-Dietrich; Decking, Ulrich; Schneider, Matthias; Ritz-Timme, Stefanie

    2012-11-07

    A mission statement (MS) sets out the long-term goals of an institution and is supposed to be suited for studying learning environments. Yet, hardly any study has tested this issue so far. The aim of the present study was the development and psychometric evaluation of an MS-Questionnaire (MSQ) focusing on explicit competencies. We investigated to what extent the MSQ captures the construct of learning environment and how well a faculty is following--in its perception--a competency orientation in a competency-based curriculum. A questionnaire was derived from the MS "teaching" (Medical Faculty, Heinrich-Heine University Düsseldorf) which was based on (inter-) nationally accepted goals and recommendations for a competency based medical education. The MSQ was administered together with the Dundee Ready Education Environment Measure (DREEM) to 1119 students and 258 teachers. Cronbach's alpha was used to analyze the internal consistency of the items. Explorative factor analyses were performed to analyze homogeneity of the items within subscales and factorial validity of the MSQ. Item discrimination was assessed by means of part-whole corrected discrimination indices, and convergent validity was analyzed with respect to DREEM. Demographic variations of the respondents were used to analyze the inter-group variations in their responses. Students and teachers perceived the MS implementation as "moderate" and on average, students differed significantly in their perception of the MS. They thought implementation of the MS was less successful than faculty did. Women had a more positive perception of educational climate than their male colleagues and clinical students perceived the implementation of the MS on all dimensions significantly worse than preclinical students. The psychometric properties of the MSQ were very satisfactory: Item discrimination was high. Similarly to DREEM, the MSQ was highly reliable among students (α = 0.92) and teachers (α = 0.93). In both groups

  16. Nuclear Security Systems and Measures for the Detection of Nuclear and Other Radioactive Material out of Regulatory Control. Implementing Guide

    International Nuclear Information System (INIS)

    2013-01-01

    Nuclear terrorism and the illicit trafficking of nuclear and other radioactive material threaten the security of all States. There are large quantities of diverse radioactive material in existence, which are used in areas such as health, the environment, agriculture and industry. The possibility that nuclear and other radioactive material may be used for terrorist acts cannot be ruled out in the current global situation. States have responded to this risk by engaging in a collective commitment to strengthen the protection and control of such material, and to establish capabilities for detection and response to nuclear and other radioactive material out of regulatory control. Through its nuclear security programme, the IAEA supports States to establish, maintain and sustain an effective nuclear security regime. The IAEA has adopted a comprehensive approach to nuclear security. This approach recognizes that an effective national nuclear security regime builds on: the implementation of relevant international legal instruments; information protection; physical protection; material accounting and control; detection of and response to trafficking in nuclear and other radioactive material; national response plans; and contingency measures. Within its nuclear security programme, the IAEA aims to assist States in implementing and sustaining such a regime in a coherent and integrated manner. Each State carries the full responsibility for nuclear security, specifically: to provide for the security of nuclear and other radioactive material and associated facilities and activities; to ensure the security of such material in use, storage or in transport; to combat illicit trafficking; and to detect and respond to nuclear security events. This is an Implementing Guide on nuclear security systems and measures for the detection of nuclear and other radioactive material out of regulatory control. The objective of the publication is to provide guidance to Member States for the

  17. ROLUL NEGUSTORILOR ALOGENI ÎN PROCESUL DE CONSTITUIRE A BURGHEZIEI COMERCIALE DIN PRINCIPATUL MOLDOVA (sfârşitul sec. al XVIII-lea – începutul sec. al XIX-lea

    Directory of Open Access Journals (Sweden)

    Irina CEREŞ

    2015-11-01

    Full Text Available În articol este a investigat rolul comercianţilor străini în crearea burgheziei comerciale în Principatul Moldova (de la sfârşitul secolului al XVIII – începutul secolului al XIX-lea. La sfârşitul secolul al XVIII-lea – începutul secolului al XIX-lea burghezia comercială a Principatului Moldova a fost o categorie ce se afla într-o stare de formare. Astfel, se poate considera că negustorii străini au fost un element im-portant în formarea lentă a burgheziei din zona carpatică. Negustorii străini stabiliţi în Moldova s-au dovedit a fi un factor de progres în ceea ce priveşte evoluţia economiei locale, au contribuit la diversificarea activităţilor economice, la dezvoltarea comerţului interior şi exterior, precum şi la consolidarea rolului burgheziei în formarea categoriilor profesionale productive şi dinamice – de meşteşugari şi meseriaşi.LE RÔLE DES MARCHANDS ALLOGÉNIQUES DANS LE PROCESSUS DE FORMATION DE LA BOURGEOISIE COMMERCIALE DE LA PRINCIPAUTÉ DE MOLDAVIE (À LA FIN DU XVIIIÈME SIÈCLE – DÉBUT DU XIX ÈME SIÈCLE  La Bourgeoisie commerciale de la Principauté de Moldavie existante à la fin du XVIIIème siècle – début du XIXème siècle constitue une catégorie sociale en phase embryonnaire. Ses représentants sont généralement des éléments allogènes, avec peu d’autochtones. On sait qu’en effet toute bourgeoisie a commencé son développement à l’aide des étrangers. La séparation de ceux-ci s’est produite uniquement après une certaine période de temps, après avoir fait leur éducation économique dans le pays d’origine. On rencontre le même processus au cas des Principautés Roumains. Les commerçants étrangers ont constitué l’un des éléments les plus importants dans le processus lent de cristallisation de la bourgeoisie autochtone. Par leurs activités commerciales et par leurs propres intérêts ils on contribué à faire évoluer les activités de commerce de

  18. Indoor particulate matter measurement as a tool in the process of the implementation of smoke-free hospitals.

    Science.gov (United States)

    Nardini, S; Cagnin, R; Invernizzi, G; Ruprecht, A; Boffi, R; Formentini, S

    2004-01-01

    There are International and National standards that requires hospitals and health premises to be smoke-free. According to recent data from Italy and other European Countries, smoking is a widespread habit in hospitals. To get smoke-free hospitals in an Italian region, we have adopted the European Code for smoke-free hospitals, which sets standards and provides instruments for its implementation. According to the Code, whenever possible, each step towards a smoke-free hospital, should be shared by all staff. As a mean for achieving this goal, in our region the certification of single units as smoke-free units has been chosen. For getting the certification, besides implementing the Code, we planned to use ETS (Environmental Tobacco Smoke) monitoring, as ETS should not be present in hospitals. As a marker of ETS we have chosen Particulate Matter (PM), as it can easily be measured in real-time with a portable instrument and, when other even outdoor--sources of combustion can be ruled out, it is an accurate detector of cigarette smoke. Here the first experience of measuring PM in hospitals for monitoring ETS and certificating smoke-free health premises, is described. PM measurements were carried out without any previous notification in different areas of two Network hospitals of the Veneto Region, during a single working day. A real time laser-operated aerosol mass analyser was used. Several classes of PM (PM1, PM2.5, PM7, PM10, TSP Total Suspended Particles) were measured. Outdoor PM levels were found to be repeatedly lower than the annual official limits of 65 mcg/m3 and around the 24 hour official limits of 15 mcg/m3 [15 to 20 mcg/m3, with an overall mean (+/-SD) of 17.8 (1.9)] throughout the whole day. Very good indoor air quality was found in the operating theaters and isolation department, where PM2.5 concentrations were much lower than outdoor levels [1.6 (0.9) and 5.9 (0.6) mcg/m3, respectively]. No increase in PM pollution was found in the surveyed medical

  19. The Multilateral Convention to Implement Tax Treaty Related Measures to Prevent BEPS—Some Thoughts on Complexity and Uncertainty

    Directory of Open Access Journals (Sweden)

    Kleist David

    2018-04-01

    Full Text Available The Multilateral Convention to Implement Tax Treaty Related Measures to Prevent Base Erosion and Profit Shifting (MLI, which was signed in June 2017, raises a multitude of questions relating not only to the text of the treaty provisions but also to the way the MLI will interact with tax treaties, for instance, and what it will mean for the future development of tax treaty law and international cooperation in tax matters. This article focuses on two aspects of the MLI. First, it deals with the substance of the MLI by providing an overview of its background and content, including the many options available to the contracting states under the MLI. Second, some thoughts are presented on the effects of the MLI in terms of complexity and uncertainty.

  20. Development and implementation of a novel measure for quantifying training loads in rowing: the T2minute method.

    Science.gov (United States)

    Tran, Jacqueline; Rice, Anthony J; Main, Luana C; Gastin, Paul B

    2014-04-01

    The systematic management of training requires accurate training load measurement. However, quantifying the training of elite Australian rowers is challenging because of (a) the multicenter, multistate structure of the national program; (b) the variety of training undertaken; and (c) the limitations of existing methods for quantifying the loads accumulated from varied training formats. Therefore, the purpose of this project was to develop a new measure for quantifying training loads in rowing (the T2minute method). Sport scientists and senior coaches at the National Rowing Center of Excellence collaborated to develop the measure, which incorporates training duration, intensity, and mode to quantify a single index of training load. To account for training at different intensities, the method uses standardized intensity zones (T zones) established at the Australian Institute of Sport. Each zone was assigned a weighting factor according to the curvilinear relationship between power output and blood lactate response. Each training mode was assigned a weighting factor based on whether coaches perceived it to be "harder" or "easier" than on-water rowing. A common measurement unit, the T2minute, was defined to normalize sessions in different modes to a single index of load; one T2minute is equivalent to 1 minute of on-water single scull rowing at T2 intensity (approximately 60-72% VO2max). The T2minute method was successfully implemented to support national training strategies in Australian high performance rowing. By incorporating duration, intensity, and mode, the T2minute method extends the concepts that underpin current load measures, providing 1 consistent system to quantify loads from varied training formats.

  1. National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources: Industrial, Commercial, and Institutional Boilers - Guidance for Calculating Emission Credits Resulting from Implementation of Energy Conservation Measures

    Science.gov (United States)

    The purpose of this July 2012 document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule.

  2. Measuring implementation of a school-based violence prevention program : Fidelity and teachers' responsiveness as predictors of proximal outcomes

    NARCIS (Netherlands)

    Schultes, Marie Therese; Stefanek, Elisabeth; van de Schoot, Rens; Strohmeier, Dagmar; Spiel, Christiane

    2014-01-01

    When school-based prevention programs are put into practice, evaluation studies commonly only consider one indicator of program implementation. The present study investigates how two different aspects of program implementation - fidelity and participant responsiveness - jointly influence proximal

  3. Updated action plan for the implementation of measures as a consequence of the Fukushima reactor accident; Fortgeschriebener Aktionsplan zur Umsetzung von Massnahmen nach dem Reaktorunfall in Fukushima

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-01-15

    The action plan of the German government concerning the measures following the Fukushima reactor accident include the decision on the future of nuclear power in Germany, safety analyses, investigations and measures for nuclear power plants in a national frame, investigations in an international frame, planning for the implementation of CNS (Convention on nuclear safety) topics 1-3, i.e. measures to increase the robustness in German nuclear power plants, and the planning of implementation of further measures (CNS topics 4-6).

  4. Implementing and measuring safety goals and safety culture. 3. Shifting to a Coaching Culture Through a 360-Degree Assessment Process

    International Nuclear Information System (INIS)

    Snow, Bruce A.; Maciuska, Frank

    2001-01-01

    Error-free operation is the ultimate objective of any safety culture. Ginna Training and Operations has embarked on an approach directed at further developing coaching skills, attitudes, and values. To accomplish this, a 360-deg assessment process designed to enhance coaching skills, attitudes, and values has been implemented. The process includes measuring participants based on a set of values and an individual self-development plan based on the feedback from the 360-deg assessment. The skills and experience of the people who make up that culture are irreplaceable. As nuclear organizations mature and generations retire, knowledge and skills must be transferred to the incoming generations without a loss in performance. The application of a 360- deg assessment process can shift the culture to include coaching in a strong command and control environment. It is a process of change management strengthened by experience while meeting the challenge to improve human performance by changing workplace attitudes. At Ginna, training programs and new processes were initiated to pursue the ultimate objective: error-free operation. The overall objective of the programs is to create a common knowledge base and the skill required to consistently incorporate ownership of 'coach and collaborate' responsibility into a strong existing 'command and control' culture. This involves the role of coach; the role of communications; and concept integration, which includes communications, coaching, and team dimensional training (TDT). The overall objective of the processes, TDT and shifting to a coaching culture through the application of a 360-deg assessment process, is to provide guidance for applying the skills learned in the programs. As depicted in Fig. 1, the TDT (a process that identifies 'strengths and challenges') can be greatly improved by applying good communications and coaching practices. As the training programs were implemented, the participants were observed and coached in

  5. HISTORIOSOPHICAL MYTH IN THE STORY OF I.S. TURGENEV "BEZHIN LEA"

    Directory of Open Access Journals (Sweden)

    Guzel Mrtazovna Ibatullina

    2014-05-01

    Full Text Available A Historiosophical problematic of the cycle of I.S. Turgenev “A Sportsman's Sketches " is one of the least studied aspects of the writer's work. The main purpose of this article is to research mithopoetic forms of the embodiment of Turgenev’s philosophy of the history in the literally system of the story “Bezhin Lea”, which is the key for the cycle. Scientific relevance and novelty of the work is determined by the new possibilities of interpretation of Turgenev’s textbook. The analysis of symbolic overtones of the story finds here the artistic encoded concept of the historical fates of Russia and of humanity as a whole; empirically observed development of the human society is explained by Turgenev through the logic of sacred metahistory.The author concludes that Turgenev’s history model is implemented in the system works as a myth through a series of associative and symbolic images and motives. However, the mythologized view of the world does not destroy the essay and factual nature of the story. Myth and reality live here in the dialogue, opening each other both for themselves and for the reader. In the context of this dialogue, the national historical myth is inextricably linked with the myth of the Fall and with the eschatological myth, and in the processes of dialogue mutual reflections each of them not only plays its traditional content, but also substantially enriches it.DOI: http://dx.doi.org/10.12731/2218-7405-2014-3-3

  6. Progress of rust and coffee plant cercosporiose mixed with grevílea, with ingazeiro and in the full sunshine in Lavras - MG

    OpenAIRE

    Salgado, Bruno Grandi; Macedo, Renato Luiz Grisi; Carvalho, Vicente Luiz de; Salgado, Mirian; Venturin, Nelson

    2007-01-01

    Com o presente trabalho, objetivou-se avaliar a incidência da ferrugem e da cercosporiose do cafeeiro em diferentes sistemas de cultivo, agroflorestais e a pleno sol, através da curva de progresso dessas doenças. Utilizou-se o delineamento inteiramente casualizado, com três tratamentos e sete repetições. Os tratamentos foram compostos por cafeeiros consorciados com ingazeiro, cafeeiros consorciados com grevílea e cafeeiros cultivados convencionalmente a pleno sol. As avaliações foram realizad...

  7. Implementation of gas concentration measurement systems using mass spectrometry in containment thermal-hydraulics test facilities: different approaches for calibration and measurement with steam/air/helium mixtures

    International Nuclear Information System (INIS)

    Auban, O.; Malet, J.; Brun, P.; Brinster, J.; Quillico, J. J.; Studer, E.

    2003-01-01

    Thermal-hydraulic test facilities are used to investigate various containment phenomena such as, for example, mixing and stratification of gases or steam condensation in the presence of noncondensable. Experiments are also required for validation of codes possessing capabilities for modelling such three-dimensional effects. The need for advanced instrumentation allowing to measure gas concentration in such conditions (typically: 100-180 .deg. C; 1-10 bar) and to get sufficiently refined information about spatial distribution of the different gas species has become apparent. This paper deals with the implementation of gas analysis systems using some commercial Quadrupole Mass Spectrometers (QMS) that have been recently added to the basic instrumentation in three thermal-hydraulics test facilities namely MISTRA (CEA, France), TOSQAN (IRSN, France) and PANDA (PSI, Switzerland). In recent years, QMS have increasingly been selected for various applications because of attractive metrological characteristics (sensibility, span of concentration range, response time, stability, etc.), relatively compact size and low cost. Although commercial QMS are sold as 'turnkey' systems, these instruments are delicate to bring into operation. As QMS are not absolute instruments, reliable calibration procedures are required for quantitative measurements. A mass spectrometer can be regarded as an ionisation gauge with subsequent separation system for the different ion species. The calculation of gas concentrations considers the partial pressure of a particular gas species to be proportional to the ion current it generates. Anyway, one must know the QMS sensitivity to the gases of interest and the only practical method is to use calibration gases. Calibration must be carried out using mixtures whose compositions are close to any possible sample compositions and the procedure selected should duplicate as closely as possible the measurement conditions established during the real experiment

  8. Behavioural change phases of different stakeholders involved in the implementation process of ergonomics measures in bricklaying (vol 36, pg 449, 2005)

    NARCIS (Netherlands)

    van der Molen, H. F.; Sluiter, J. K.; Frings-Dresen, M. H. W.

    2005-01-01

    The objective of this qualitative study was to assess whether a hypothesised sequential order of behavioural change phases would be fulfilled in different groups of stakeholders involved at the start of a process to implement ergonomic measures in bricklaying teams. The measures include trestles,

  9. Peak and Valley TOU One Effective DSM Measure Being Implemented Now%峰谷分时电价:一种现行有效的DSM措施

    Institute of Scientific and Technical Information of China (English)

    王治华; 唐为民; 李扬; 李军红; 张长沪

    2002-01-01

    TOU tariff is one of the measures for implementing the DSM. This paper introduces the appearance of DSMand its measures and main contents. TOU tariff's principle、structure and strategy of price-setting are also expounded. Finallythe effectiveness of TOU tariff is illustrated through the example of Nanjing.

  10. Enterprise resource planning system implementation and success measurement : case study of a small to medium sized enterprise

    OpenAIRE

    Shaikh, N.

    2014-01-01

    It is widely believed that major financial benefits can be achieved by organisations implementing Enterprise Resource Planning software. It is also believed that such systems are a time consuming and a costly endeavour which can result in loss of resource and eventually failure of implementation. Furthermore not all companies have the technical competence or financial stability to take such a risk. Alternatively companies can be more modular in their approach in implementing...

  11. Combining Geoelectrical Measurements and CO2 Analyses to Monitor the Enhanced Bioremediation of Hydrocarbon-Contaminated Soils: A Field Implementation

    Directory of Open Access Journals (Sweden)

    Cécile Noel

    2016-01-01

    Full Text Available Hydrocarbon-contaminated aquifers can be successfully remediated through enhanced biodegradation. However, in situ monitoring of the treatment by piezometers is expensive and invasive and might be insufficient as the information provided is restricted to vertical profiles at discrete locations. An alternative method was tested in order to improve the robustness of the monitoring. Geophysical methods, electrical resistivity (ER and induced polarization (IP, were combined with gas analyses, CO2 concentration, and its carbon isotopic ratio, to develop a less invasive methodology for monitoring enhanced biodegradation of hydrocarbons. The field implementation of this monitoring methodology, which lasted from February 2014 until June 2015, was carried out at a BTEX-polluted site under aerobic biotreatment. Geophysical monitoring shows a more conductive and chargeable area which corresponds to the contaminated zone. In this area, high CO2 emissions have been measured with an isotopic signature demonstrating that the main source of CO2 on this site is the biodegradation of hydrocarbon fuels. Besides, the evolution of geochemical and geophysical data over a year seems to show the seasonal variation of bacterial activity. Combining geophysics with gas analyses is thus promising to provide a new methodology for in situ monitoring.

  12. Implementation of multiple measures to improve reactor recirculation pump sealing performance in nuclear boiling water reactor service

    Energy Technology Data Exchange (ETDEWEB)

    Loenhout, Gerard van [Flowserve B.V., Etten-Leur (Netherlands). Nuclear Services and Solutions Engineering; Hurni, Juerg

    2015-05-15

    A modern reactor recirculation pump circulates a large volume of high temperature, very pure water from the reactor pressure vessel back to the core by feeding into multiple stationary jet pumps inside the vessel. Together with the jet pumps, they allow station operators to vary coolant flow and variable pump speed provides the best and most stable reactor power control. A crucial technical problem with a recirculation pump, such as a mechanical seal indicating loss of sealing pressure, may result in a power station having to shut down for repair. This article describes the sudden increase in stray current phenomenon leading to rapid and severe deterioration of the mechanical end face shaft seal in a reactor recirculation pump. This occurred after the installation of a variable frequency converter replacing the original motor-generator set. This article will also discuss the 2,500 hour laboratory test results conducted under reactor recirculation pump sealing conditions using a newly developed seal face technology recently implemented to overcome challenges when sealing neutral, ultra-pure water. In addition, the article will describe the elaborate shaft grounding arrangement and the preliminary measurement results achieved in order to eliminate potential damages to both pump and mechanical seal.

  13. Guidance for the Implementation and Follow-up of Identified Energy and Water Efficiency Measures in Covered Facilities

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-09-01

    This document provides specific guidance to agencies on the implementation and follow-up of energy and water efficiency measures identified and undertaken per Section 432 of the Energy Independence and Security Act of 2007 (EISA) (42 U.S.C. 8253(f)(4) and (5)) This guidance also provides context for how these activities fit into the comprehensive approach to facility energy and water management outlined by the statute and incorporates by reference previous DOE guidance released for Section 432 of EISA and other related documents. 42 U.S.C. 8253(f)(7)(A) specifies that facility energy managers shall certify compliance for each covered facility with the 42 U.S.C. 8253(f)(2)-(5) requirements via a web-based tracking system and make it publicly available. This document also describes the role of the tracking system that has been developed for the collection and reporting of data needed for the demonstration of compliance and progress toward meeting all energy and water efficiency requirements outlined in the statute.

  14. Strategies for Optimal Implementation of Simulated Clients for Measuring Quality of Care in Low- and Middle-Income Countries.

    Science.gov (United States)

    Fitzpatrick, Anne; Tumlinson, Katherine

    2017-03-24

    The use of simulated clients or "mystery clients" is a data collection approach in which a study team member presents at a health care facility or outlet pretending to be a real customer, patient, or client. Following the visit, the shopper records her observations. The use of mystery clients can overcome challenges of obtaining accurate measures of health care quality and improve the validity of quality assessments, particularly in low- and middle-income countries. However, mystery client studies should be carefully designed and monitored to avoid problems inherent to this data collection approach. In this article, we discuss our experiences with the mystery client methodology in studies conducted in public- and private-sector health facilities in Kenya and in private-sector facilities in Uganda. We identify both the benefits and the challenges in using this methodology to guide other researchers interested in using this technique. Recruitment of appropriate mystery clients who accurately represent the facility's clientele, have strong recall of recent events, and are comfortable in their role as undercover data collectors are key to successful implementation of this methodology. Additionally, developing detailed training protocols can help ensure mystery clients behave identically and mimic real patrons accurately while short checklists can help ensure mystery client responses are standardized. Strict confidentiality and protocols to avoid unnecessary exams or procedures should also be stressed during training and monitored carefully throughout the study. Despite these challenges, researchers should consider mystery client designs to measure actual provider behavior and to supplement self-reported provider behavior. Data from mystery client studies can provide critical insight into the quality of service provision unavailable from other data collection methods. The unique information available from the mystery client approach far outweighs the cost.

  15. Co-transforming bar and CsLEA enhanced tolerance to drought and salt stress in transgenic alfalfa (Medicago sativa L.).

    Science.gov (United States)

    Zhang, Jiyu; Duan, Zhen; Zhang, Daiyu; Zhang, Jianquan; Di, Hongyan; Wu, Fan; Wang, Yanrong

    2016-03-25

    Drought and high salinity are two major abiotic factors that restrict alfalfa productivity. A dehydrin protein, CsLEA, from the desert grass Cleistogenes songorica was transformed into alfalfa (Medicago sativa L.) via Agrobacterium-mediated transformation using the bar gene as a selectable marker, and the drought and salt stress tolerances of the transgenic plants were assessed. Thirty-nine of 119 transformants were positive, as screened by Basta, and further molecularly authenticated using PCR and RT-PCR. Phenotype observations revealed that the transgenic plants grew better than the wild-type (WT) plants after 15d of drought stress and 10d of salt stress: the leaves of WT alfalfa turned yellow, whereas the transgenic alfalfa leaves only wilted; after rewatering, the transgenic plants returned to a normal state, though the WT plants could not be restored. Evaluation of physiologic and biochemical indices during drought and salt stresses showed a relatively lower Na(+) content in the leaves of the transgenic plants, which would reduce toxic ion effects. In addition, the transgenic plants were able to maintain a higher relative water content (RWC), higher shoot biomass, fewer photosystem changes, decreased membrane injury, and a lower level of osmotic stress injury. These results demonstrate that overexpression of the CsLEA gene can enhance the drought and salt tolerance of transgenic alfalfa; in addition, carrying the bar gene in the genome may increase herbicide resistance. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Computional algorithm for lifetime exposure to antimicrobials in pigs using register data-The LEA algorithm.

    Science.gov (United States)

    Birkegård, Anna Camilla; Andersen, Vibe Dalhoff; Halasa, Tariq; Jensen, Vibeke Frøkjær; Toft, Nils; Vigre, Håkan

    2017-10-01

    obtained. The algorithm provides a systematic and repeatable approach to estimating the antimicrobial exposure throughout the rearing period, independent of rearing site for finisher batches, as a lifetime exposure measurement. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Developing a common framework for evaluating the implementation of genomic medicine interventions in clinical care: the IGNITE Network's Common Measures Working Group.

    Science.gov (United States)

    Orlando, Lori A; Sperber, Nina R; Voils, Corrine; Nichols, Marshall; Myers, Rachel A; Wu, R Ryanne; Rakhra-Burris, Tejinder; Levy, Kenneth D; Levy, Mia; Pollin, Toni I; Guan, Yue; Horowitz, Carol R; Ramos, Michelle; Kimmel, Stephen E; McDonough, Caitrin W; Madden, Ebony B; Damschroder, Laura J

    2018-06-01

    PurposeImplementation research provides a structure for evaluating the clinical integration of genomic medicine interventions. This paper describes the Implementing Genomics in Practice (IGNITE) Network's efforts to promote (i) a broader understanding of genomic medicine implementation research and (ii) the sharing of knowledge generated in the network.MethodsTo facilitate this goal, the IGNITE Network Common Measures Working Group (CMG) members adopted the Consolidated Framework for Implementation Research (CFIR) to guide its approach to identifying constructs and measures relevant to evaluating genomic medicine as a whole, standardizing data collection across projects, and combining data in a centralized resource for cross-network analyses.ResultsCMG identified 10 high-priority CFIR constructs as important for genomic medicine. Of those, eight did not have standardized measurement instruments. Therefore, we developed four survey tools to address this gap. In addition, we identified seven high-priority constructs related to patients, families, and communities that did not map to CFIR constructs. Both sets of constructs were combined to create a draft genomic medicine implementation model.ConclusionWe developed processes to identify constructs deemed valuable for genomic medicine implementation and codified them in a model. These resources are freely available to facilitate knowledge generation and sharing across the field.

  18. Nuclear Security Systems and Measures for the Detection of Nuclear and Other Radioactive Material out of Regulatory Control. Implementing Guide (Arabic Edition)

    International Nuclear Information System (INIS)

    2015-01-01

    This publication provides guidance to Member States for the development, or improvement of nuclear security systems and measures for the detection of criminal or unauthorized acts with nuclear security implications involving nuclear and other radioactive material out of regulatory control. It describes the elements of an effective nuclear security detection architecture which is composed of an integrated set of nuclear security systems and measures, and is based on an appropriate legal and regulatory framework for the implementation of the national detection strategy. The publication is an implementing guide within the IAEA Nuclear Security Series and is intended for use by national policy makers, legislative bodies, competent authorities, institutions, and individuals involved in the establishment, implementation, maintenance or sustainability of nuclear security systems and measures for the detection of nuclear and other radioactive material out of regulatory control

  19. Measuring, understanding and implementing (or at least trying) soil and water conservation in agricultural areas in Mediterranean conditions

    Science.gov (United States)

    Gómez, Jose Alfonso; Burguet, María; Castillo, Carlos; de Luna, Elena; Guzmán, Gema; Lora, Ángel; Lorite, Ignacio; Mora, José; Pérez, Rafael; Soriano, María A.; Taguas, Encarnación V.

    2015-04-01

    Understanding soil erosion processes is the first step for designing and implementing effective soil conservation strategies. In agricultural areas, spatially in arid and semiarid conditions, water conservation is interlinked with soil conservation, and usually need to be addressed simultaneously to achieve success in their use by farmers. This is so for different reasons, but usually because some reduction in runoff is required to prevent soil erosion or to the need to design soil conservation systems that do maintain a favourable water balance for the crop to prevent yield reductions. The team presenting this communication works around both issues in Southern Spain, interconnecting several lines of research with the final objective of contribute to reverse some severe issues relating soil conservation in agricultural areas, mostly on tree crops (olives and vineyards). One of these lines is long-term experiments measuring, runoff and sediment losses at plot and small catchment scale. In these experiments we test the effect of different soil management alternatives on soil and water conservation. We also measured the evolution of soil properties and, in some cases, the evolution of soil moisture as well as nutrient and carbon losses with runoff and sediment. We also tests in these experiments new cover crops, from species better adapted to the rainfall regime of the region to mixes with several species to increase biodiversity. We complement these studies with surveys of soil properties in commercial farms. I some of these farms we follow the introduction by farmers of the cover crop strategies previously developed in our experimental fields. These data are invaluable to elaborate, calibrate and validate different runoff generation, water balance, and water erosion models and hillslope and small catchment scale. This allows us to elaborate regional analysis of the effect of different strategies to soil and water conservation in olive growing areas, and to refine

  20. National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Schiller Consulting, Inc.; Schiller, Steven R.; Goldman, Charles A.; Galawish, Elsia

    2011-02-04

    This report is a scoping study that identifies issues associated with developing a national evaluation, measurement and verification (EM&V) standard for end-use, non-transportation, energy efficiency activities. The objectives of this study are to identify the scope of such a standard and define EM&V requirements and issues that will need to be addressed in a standard. To explore these issues, we provide and discuss: (1) a set of definitions applicable to an EM&V standard; (2) a literature review of existing guidelines, standards, and 'initiatives' relating to EM&V standards as well as a review of 'bottom-up' versus 'top-down' evaluation approaches; (3) a summary of EM&V related provisions of two recent federal legislative proposals (Congressman Waxman's and Markey's American Clean Energy and Security Act of 2009 and Senator Bingaman's American Clean Energy Leadership Act of 2009) that include national efficiency resource requirements; (4) an annotated list of issues that that are likely to be central to, and need to be considered when, developing a national EM&V standard; and (5) a discussion of the implications of such issues. There are three primary reasons for developing a national efficiency EM&V standard. First, some policy makers, regulators and practitioners believe that a national standard would streamline EM&V implementation, reduce costs and complexity, and improve comparability of results across jurisdictions; although there are benefits associated with each jurisdiction setting its own EM&V requirements based on their specific portfolio and evaluation budgets and objectives. Secondly, if energy efficiency is determined by the US Environmental Protection Agency to be a Best Available Control Technology (BACT) for avoiding criteria pollutant and/or greenhouse gas emissions, then a standard can be required for documenting the emission reductions resulting from efficiency actions. The third reason for a national

  1. Cross-sectional study on factors hampering implementation of measles pre- and postexposure measures in Dutch hospitals during the 2013-2014 measles outbreak.

    Science.gov (United States)

    Fievez, L C R; Wong, A; Ruijs, W L M; Meerstadt-Rombach, F S; Timen, A

    2017-07-01

    This study examined adherence to national recommendations on measles pre- and postexposure measures, including immunization of health care workers (HCWs) in Dutch hospitals, during a national outbreak of measles in The Netherlands. This study also investigated which hospital characteristics and organizational issues hamper implementation. This was a cross-sectional survey among all general and academic hospitals in The Netherlands. An online structured questionnaire (48 questions) was administered. Analysis was performed using descriptive statistics and logistic regression. Of 88 hospitals, 70 (79.5%) were included. Of 68 hospitals, 48 (70.6%) assessed susceptibility to measles in HCWs. Of 70 hospitals, 61 (87.1%) offered vaccination to susceptible HCWs. Of 63 hospitals, 42 (66.7%) had postexposure policies consistent with national recommendations. Of 62 hospitals, 30 (48.4%) implemented all these measures, which is the minimum set of measures considered necessary to adequately prevent measles in HCWs. Logistic regression suggests that hospitals with several locations, hospitals with more employees, and hospitals where infectious disease experts designed infection prevention policies while occupational health experts implemented the policy less often implemented this minimum set of measures (P measles outbreak, most hospitals took measures to prevent measles in HCWs, but less than half implemented the minimum set of measures required. Implementation strategies in hospitals need to be improved, especially in large-sized hospitals and hospitals with several locations, and with respect to the assignment of responsibilities for infection prevention policies. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  2. Developing and testing an instrument to measure the presence of conditions for successful implementation of quality improvement collaboratives.

    Science.gov (United States)

    Dückers, Michel L A; Wagner, Cordula; Groenewegen, Peter P

    2008-08-11

    In quality improvement collaboratives (QICs) teams of practitioners from different health care organizations are brought together to systematically improve an aspect of patient care. Teams take part in a series of meetings to learn about relevant best practices, quality methods and change ideas, and share experiences in making changes in their own local setting. The purpose of this study was to develop an instrument for measuring team organization, external change agent support and support from the team's home institution in a Dutch national improvement and dissemination programme for hospitals based on several QICs. The exploratory methodological design included two phases: a) content development and assessment, resulting in an instrument with 15 items, and b) field testing (N = 165). Internal consistency reliability was tested via Cronbach's alpha coefficient. Principal component analyses were used to identify underlying constructs. Tests of scaling assumptions according to the multi trait/multi-item matrix, were used to confirm the component structure. Three components were revealed, explaining 65% of the variability. The components were labelled 'organizational support', 'team organization' and 'external change agent support'. One item not meeting item-scale criteria was removed. This resulted in a 14 item instrument. Scale reliability ranged from 0.77 to 0.91. Internal item consistency and divergent validity were satisfactory. On the whole, the instrument appears to be a promising tool for assessing team organization and internal and external support during QIC implementation. The psychometric properties were good and warrant application of the instrument for the evaluation of the national programme and similar improvement programmes.

  3. Developing and testing an instrument to measure the presence of conditions for successful implementation of quality improvement collaboratives

    Directory of Open Access Journals (Sweden)

    Wagner Cordula

    2008-08-01

    Full Text Available Abstract Background In quality improvement collaboratives (QICs teams of practitioners from different health care organizations are brought together to systematically improve an aspect of patient care. Teams take part in a series of meetings to learn about relevant best practices, quality methods and change ideas, and share experiences in making changes in their own local setting. The purpose of this study was to develop an instrument for measuring team organization, external change agent support and support from the team's home institution in a Dutch national improvement and dissemination programme for hospitals based on several QICs. Methods The exploratory methodological design included two phases: a content development and assessment, resulting in an instrument with 15 items, and b field testing (N = 165. Internal consistency reliability was tested via Cronbach's alpha coefficient. Principal component analyses were used to identify underlying constructs. Tests of scaling assumptions according to the multi trait/multi-item matrix, were used to confirm the component structure. Results Three components were revealed, explaining 65% of the variability. The components were labelled 'organizational support', 'team organization' and 'external change agent support'. One item not meeting item-scale criteria was removed. This resulted in a 14 item instrument. Scale reliability ranged from 0.77 to 0.91. Internal item consistency and divergent validity were satisfactory. Conclusion On the whole, the instrument appears to be a promising tool for assessing team organization and internal and external support during QIC implementation. The psychometric properties were good and warrant application of the instrument for the evaluation of the national programme and similar improvement programmes.

  4. Measuring the impact and costs of a universal group based parenting programme: protocol and implementation of a trial

    Directory of Open Access Journals (Sweden)

    Winstanley Sarah

    2010-06-01

    new UK research governance procedures. Discussion Whilst there are strong theoretical arguments to support universal provision of parenting programmes, few universal programmes have been subjected to randomised controlled trials. In this paper we describe a RCT protocol with quantitative and qualitative outcome measures and an economic evaluation designed to provide clear evidence with regard to effectiveness and costs. We describe challenges implementing the protocol and how we are addressing these. Trial Registration Current Controlled Trials ISRCTN13919732

  5. Saatuslikud kohtumised / Lea Arme

    Index Scriptorium Estoniae

    Arme, Lea

    2001-01-01

    Laive Poskast, Eesti Eriolümpia rahvuslikust direktorist, vaimupuudega laste ja noorte treenerist. Tema õpilasest Andrei Kolovanist, kes 1995. a. võitis Connecticutis paraolümpiamängudel kahevõistluses tõstmises hõbemedali

  6. Measurement properties and implementation of a checklist to assess leadership skills during interdisciplinary rounds in the intensive care unit

    NARCIS (Netherlands)

    Ten Have, Elsbeth C M; Nap, Raoul E; Tulleken, Jaap E

    2015-01-01

    The implementation of interdisciplinary teams in the intensive care unit (ICU) has focused attention on leadership behavior. A daily recurrent situation in ICUs in which both leadership behavior and interdisciplinary teamwork are integrated concerns the interdisciplinary rounds (IDRs). Although IDRs

  7. Effects of increasing use of trifluralin and glyphosate on the microbial activity of a lea soil; Efeito de doses crescentes dos herbicidas trifluralina e glifosato sobre a atividade microbiana de um solo de varzea

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Edna Santos de; Monteiro, Regina Teresa Rosim [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil); Peixoto, Maria de Fatima da Silva Pinto [Sao Paulo Univ., Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz. Dept. de Quimica. E-mail: mfsppeix@carpa.ciagri.usp.br; Fay, Elizabeth Francisconi [Empresa Brasileira de Pesquisa Agropecuaria, Jaguariuna, SP (Brazil). Centro Nacional de Pesquisa de Defesa da Agricultura. E-mail: bethfay@cnpma.embrapa.com.br

    1997-07-01

    This work considers the importance of the glyphosate and trifluralin, which are the most used herbicides by the brazilian plantations, applying approximately fifteen and nine millions of liters by crop, respectively, for the evaluation of the increasing use of these herbicides effects on the microbial activity of a lea soil which are used for beans cultivation.

  8. Stakeholder Engagement in a Patient-Reported Outcomes (PRO) Measure Implementation: A Report from the SAFTINet Practice-based Research Network (PBRN).

    Science.gov (United States)

    Kwan, Bethany M; Sills, Marion R; Graham, Deborah; Hamer, Mika K; Fairclough, Diane L; Hammermeister, K E; Kaiser, Alicyn; de Jesus Diaz-Perez, Maria; Schilling, Lisa M

    2016-01-01

    Patient-reported outcome (PRO) measures offer value for clinicians and researchers, although priorities and value propositions can conflict. PRO implementation in clinical practice may benefit from stakeholder engagement methods to align research and clinical practice stakeholder perspectives. The objective is to demonstrate the use of stakeholder engagement in PRO implementation. Engaged stakeholders represented researchers and clinical practice representatives from the SAFTINet practice-based research network (PBRN). A stakeholder engagement process involving iterative analysis, deliberation, and decision making guided implementation of a medication adherence PRO measure (the Medication Adherence Survey [MAS]) for patients with hypertension and/or hyperlipidemia. Over 9 months, 40 of 45 practices (89%) implemented the MAS, collecting 3,247 surveys (mean = 72, median = 30, range: 0 - 416). Facilitators included: an electronic health record (EHR) with readily modifiable templates; existing staff, tools and workflows in which the MAS could be integrated (e.g., health risk appraisals, hypertension-specific visits, care coordinators); and engaged leadership and quality improvement teams. Stakeholder engagement appeared useful for promoting PRO measure implementation in clinical practice, in a way that met the needs of both researchers and clinical practice stakeholders. Limitations of this approach and opportunities for improving the PRO data collection infrastructure in PBRNs are discussed. © Copyright 2016 by the American Board of Family Medicine.

  9. Progresso da ferrugem e da cercosporiose do cafeeiro consorciado com grevílea, com ingazeiro e a pleno sol em Lavras - MG Progress of rust and coffee plant cercosporiose mixed with grevílea, with ingazeiro and in the full sunshine in Lavras - MG

    Directory of Open Access Journals (Sweden)

    Bruno Grandi Salgado

    2007-08-01

    Full Text Available Com o presente trabalho, objetivou-se avaliar a incidência da ferrugem e da cercosporiose do cafeeiro em diferentes sistemas de cultivo, agroflorestais e a pleno sol, através da curva de progresso dessas doenças. Utilizou-se o delineamento inteiramente casualizado, com três tratamentos e sete repetições. Os tratamentos foram compostos por cafeeiros consorciados com ingazeiro, cafeeiros consorciados com grevílea e cafeeiros cultivados convencionalmente a pleno sol. As avaliações foram realizadas mensalmente no período de abril de 2001 a março de 2003. Realizou-se o cálculo da área abaixo da curva de progresso da doença (AACPD, a qual foi submetida à análise de variância. Para a incidência da ferrugem do cafeeiro o consórcio cafeeiro x ingazeiro mostrou-se com maiores índices da doença, sendo que os tratamentos consórcio cafeeiro x grevílea e cafeeiro a pleno sol não diferiram entre si e apresentaram menores incidências da doença. Diminuição na luz solar direta e maior umidade podem ter favorecido a ferrugem no sistema cafeeiro x ingazeiro. Para a incidência de cercosporiose, os cafeeiros a pleno sol obtiveram maiores valores de incidência da doença, seguidos por cafeeiros x grevílea, e menores taxas da doença foram observadas no consórcio cafeeiros x ingazeiro. A incidência de radiação solar direta pode ter favorecido a maior incidência de cercosporiose nos cafeeiros a pleno sol.The present work aimed to evaluate the incidence of rust and coffee plant cercosporiose in different systems of agroforest cultivation and in the full sunshine through the progress curve of those diseases. The completely randomized design with three treatments and seven replicates was utilized. The treatments were made up of coffee plants mixed with ingazeiro, coffee plants mixed with grevílea and coffee plants cultivated conventionally in the full sunshine. The evaluations were performed monthly during the period of April 2001 to

  10. Development of an instrument measuring the perceived attributes of implementing a healthy diet innovation in the Lower Mississippi Delta

    Science.gov (United States)

    The purpose of this research was to develop a valid and reliable instrument to assess individuals' perceived attributes of implementing a healthy diet. Using the Diffusion of Innovations (DOI) theory as a conceptual framework, this descriptive study consisted of three phases. Phase 1 included group ...

  11. Implementation of recommended measures in patients with stable coronary artery disease: the data from 2014 Russian registry

    Directory of Open Access Journals (Sweden)

    Korotin A.S.

    2015-03-01

    Full Text Available A report presents the data on assessment of recommended treatment implementation in patients with stable coronary artery disease (CAD. The source of the data of the year 2014 was multicenter Russian registry of hypertension, CAD and chronic heart failure.

  12. Measuring the implementation of codes of conduct. An assessment method based on a process approach of the responsible organisation

    NARCIS (Netherlands)

    Nijhof, A.H.J.; Cludts, Stephan; Fisscher, O.A.M.; Laan, Albertus

    2003-01-01

    More and more organisations formulate a code of conduct in order to stimulate responsible behaviour among their members. Much time and energy is usually spent fixing the content of the code but many organisations get stuck in the challenge of implementing and maintaining the code. The code then

  13. National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers; Guidance for Calculating Efficiency Credits Resulting from Implementation of Energy Conservation Measures

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Daryl [ORNL; Papar, Riyaz [Hudson Technologies; Wright, Dr. Anthony [ALW Consulting

    2013-02-01

    The purpose of this document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule (i.e., subpart DDDDD of CFR part 63). This document divides Boiler System conservation opportunities into four functional areas: 1) the boiler itself, 2) the condensate recovery system, 3) the distribution system, and 4) the end uses of the steam. This document provides technical information for documenting emissions credits proposed in the Implementation Plan for functional areas 2) though 4). This document does not include efficiency improvements related to the Boiler tune-ups.

  14. Design and implementation of a Smart Measurement System for AMI in the microgrid of the University of Nariño

    Directory of Open Access Journals (Sweden)

    Andrés F. Arciniegas M.

    2017-02-01

    Full Text Available This project describes a proposed Measure Management System, from the design stage to the implementation of a prototype smart meter, adapted to operate in the microgrid at the University of Nariño. This device features a constant record of measures, with resolution of 24 bits, sufficient to perform power quality analysis. In addition, it is integrated into the SCADA system through the open protocols MODBUS, DNP3 and IEC 61850, with scheduled cybersecurity techniques. Likewise, several management platforms for the monitoring of electrical variables and control over the current flow to the loads is designed. Finally, two study cases show the application of the implemented measure management system in the microgrid.

  15. Modernization of Kozloduy nuclear plant unit 5 and 6, implementation of measures to improve the reliability of the main generator system

    International Nuclear Information System (INIS)

    Stinshoff, H.

    2003-01-01

    To improve the reliability of Kozloduy Nuclear power plant several modernization measures will be implemented during the outages in the years 2003 to 2005. In the area of the main generator the following measures will be performed in unit 6 during 2003 outage: - Replacement of main generator circuit breaker by new SF6 cooled breaker type - Replacement of main generator excitation system by new two channel digital system - Replacement of main generator protection by new digital multi-purpose protections including digital fault recorders - Installation of radio frequency monitoring system of main generator circuit Starting from the present situation the new concept is explained. The project organization under consideration of large Bulgarian participation as well as the sequence and schedule of the implementation during the short outage time window is shown. These modernization measures lead to an increase of reliability and availability for the operation of the power plant and with this to increase power plant safety

  16. Implementing and measuring safety goals and safety culture. 2. Extensive Efforts to Learn Lessons from Overseas Nuclear Power Plants

    International Nuclear Information System (INIS)

    Maki, Nobuo

    2001-01-01

    The transfer of nuclear power plant (NPP) operating experiences is one of the important measures for the safe operation of NPPs. The Institute of Nuclear Power Operations (INPO),World Association of Nuclear Operators (WANO), and Nuclear Information Center of Central Research Institute of Electric Power Industry are the organizations providing Japanese utilities with useful information on incidents and accidents that have occurred at foreign NPPs. The Kansai Electric Power Company (KEPCO) has established two organizations to make extensive efforts to learn lessons from overseas NPPs: One is the Nuclear Power Plant Maintenance Training Center (MTC), and the other is the Institute of Nuclear Safety System (INSS). This paper describes the function of these organizations in transferring knowledge and expertise to ensure the safe operation of Japanese NPPs as well as recent outcomes. MTC was set up in October 1983. Before its establishment, expertise on NPP maintenance was mainly transferred on an on-the-job basis through daily maintenance work. However, after various NPP incidents and accidents, the importance of off-site training for maintenance personnel was emphasized. MTC possesses full-sized or nearly full sized mockups of Mihama NPP Unit 3 and Takahama NPP Unit 3. Furthermore, many kinds of mechanical, electrical, and instrumental equipment are furnished for training. In 1999, more than 2400 (man/day) maintenance personnel in total had training at MTC. In the tube rupture accident of a steam generator of KEPCO's Mihama Unit 2 on February 9, 1991, the emergency core cooling system actuated for the first time in the history of NPP operation in Japan. The cause of the accident was a fault in the manufacturing process of the steam generator, which was not detected until the accident. After an in-depth evaluation of the accident, many corrective actions were taken to prevent the recurrence of a similar accident. As a part of the actions, KEPCO established INSS in March

  17. Implementing and measuring safety goals and safety culture. 4. Utility's Activities for Better Safety Culture After the JCO Accident

    International Nuclear Information System (INIS)

    Omoto, Akira

    2001-01-01

    three activities described below. As a part of self-diagnosis of organizational behavior and an individual's factors influencing safety, measurement was carried out by asking questions to every employee at the station, i.e., 21 questions asking if we are appropriately implementing safety culture 'standards' as set forth in INSAG-4 (Ref. 2). The purpose was twofold: to educate about INSAG-4 and to find areas for improvement. The results indicated that employees want to learn more about (a) the background for the specific actions required/prescribed in the procedures/guidelines and (b) how things go wrong if they do not strictly follow the procedures/guidelines. These were important findings, which led to the reconstruction of the on-site education and training. Considering that employees should be well informed on safety culture; management's policy; and lessons learned from incidents, domestic or international, we started the bimonthly magazine Safety Culture. The first publication included articles on 'Lessons Learned from JCO', 'The Results from the Self- Diagnosis', 'Lessons from an Incident at Hunterston NPS (LOOP Followed by Operator Actions for Safe Shutdown)', and others. The on-site training system has two elements: on-the-job training and off-the-job study with classroom and hands-on training. Most of the employees are trained at the On-Site Training Center with equipment and are qualified for specific job categories. Training of operators has its own lengthy program. Given the foregoing findings, we (a) started lectures on JCO lessons learned, (b) modified the educational system at the On-Site Training Center to nurture the employees with well-balanced knowledge and thinking (Fig. 1), and (c) prepared documents that describe the background and reasons for the actions required/prescribed in the procedures/guidelines for use in on-the-job training. The important point to be remembered about the JCO accident is that the criticality safety at this facility

  18. Bearer Plants: Stakeholders’ View on the Appropriate Measurement Model

    OpenAIRE

    Maria Ionela Damian; Sorana Mihaela Manoiu; Carmen Giorgiana Bonaci; Jiri Strouhal

    2014-01-01

    While the importance of agriculture to the global economy seems to be generally acknowledged, financial reporting in the agricultural sector still generates intense debates. Our paper contributes to the debate on fair value measurement of biological assets by focusing on the proposed amendments to IAS 16 and IAS 41 (through the Exposure Draft Agriculture: Bearer Plants – International Accounting Standards Board (IASB) (2013)). The IASB is faced with analyzing whether applying IAS 16 would lea...

  19. Design and implementation of practical bidirectional texture function measurement devices focusing on the developments at the University of Bonn.

    Science.gov (United States)

    Schwartz, Christopher; Sarlette, Ralf; Weinmann, Michael; Rump, Martin; Klein, Reinhard

    2014-04-28

    Understanding as well as realistic reproduction of the appearance of materials play an important role in computer graphics, computer vision and industry. They enable applications such as digital material design, virtual prototyping and faithful virtual surrogates for entertainment, marketing, education or cultural heritage documentation. A particularly fruitful way to obtain the digital appearance is the acquisition of reflectance from real-world material samples. Therefore, a great variety of devices to perform this task has been proposed. In this work, we investigate their practical usefulness. We first identify a set of necessary attributes and establish a general categorization of different designs that have been realized. Subsequently, we provide an in-depth discussion of three particular implementations by our work group, demonstrating advantages and disadvantages of different system designs with respect to the previously established attributes. Finally, we survey the existing literature to compare our implementation with related approaches.

  20. Interservice Procedures for Instructional Systems Development. Phase 4 and 5. Implement and Control

    Science.gov (United States)

    1975-08-01

    FIGUREIZ.2: Flowchart ot Block]Z.1: IMPLEMENT INSTRUCTIONAL MANAGEMENT PLAN BLOCK IV.2: CONDUCT INSTRUCTION LEA Oa.lNUt kaP INSTRUCTIONAL INIIANAI EL...DOCUMENTATION 2.1 [ BTAIN REQUIRED _ _ I 2.J2 CONDUCT INSTRUCTION 1 1 AND DOCUMENT OBSERVATIONS 2.3 ACTIVITIES 2.4 I BLOCK FIGURE ]V.3: Flowchart of...not have the entry skills. The entry skills determi- nation is important to know whether to place the students at the beginn - ing or provide

  1. An Integrated WRF-CAMx Modeling Approach for Impact Analysis of Implementing the Emergency PM2.5 Control Measures during Red Alerts in Beijing in December 2015

    Science.gov (United States)

    Jia, J.; Cheng, S.; Lei, L.; Lang, J.

    2017-12-01

    In December 2015, the Beijing-Tianjin-Hebei (BTH) region experienced several episodes of heavy air pollution. Beijing municipal government therefore issued 2 red alerts on December 7 and 19, respectively, and also implemented emergency control measures to alleviate the negative effects of pollution. It is estimated that the heavy pollutions in 2 red alert periods in Beijing were due mainly to the accumulation of air pollutants from local emission sources and the transboundary transport of pollutants from surrounding areas. The collected meteorological and PM2.5 data indicate that the severity of air pollutions were enlarged by the poor meteorological conditions along with lower mixing layer height. In this study, the WRF-CAMx modeling system was utilized not only for analyzing the contributions of PM2.5 from different sources, but also for quantitatively assessing the effects of implementing various emergency control measures on PM2.5 pollution control during the red alert periods. The modeling results show that local emissions were the most dominant contributors (64.8%-83.5%) among all emission sources, while the main external contributions came from the city of Baoding (3.4%-9.3%). In addition, among 5 different emission source categories, coal and traffic were the two dominant contributors to PM2.5 concentration in urban area of Beijing. Then four pollution control scenarios were designed particularly to investigate the effectiveness of the emergency control measures, and the results show that, generally these emergency control measures have positive effects on air pollution reduction. In particular, restrictive measures of traffic volume control and industrial activity shutdown/suspension have been found as the most effective measures in comparison to other emergency control measures. It is recommended that such effective measures should be considered to implement when next time similar heavy air pollutions occur in the city of Beijing.

  2. Planning, implementation and analysis of mine-surveying measurements to detect rock movements at the Asse salt mine

    International Nuclear Information System (INIS)

    Hensel, G.

    1991-01-01

    At the Asse pit, a former salt mine, research has been done since 1965 mainly for the ultimate disposal of radioactive wastes. Within this framework a mine-surveying measurement program has been developed to detect local and extensive rock movements in the mine structure and on the surface. The rock observation program consists of surface levelling, levellings in the mine structure, measurement of shaft depth, shaft sounding, position and gyroscopic measurements as well as cavity convergence and extensometer measurements. The results of that measuring program are taken into account to judge stability. The subject of this work is to analyse the position measurements by priorities to find out to which extent the results, that is the horizontal displacement components, are interpretable. Such analysis is carried out according to the rules of compensating calculation by means of strict compensation after mediating observations. (HS) [de

  3. Review of the Reported Measures of Clinical Validity and Clinical Utility as Arguments for the Implementation of Pharmacogenetic Testing: A Case Study of Statin-Induced Muscle Toxicity

    Directory of Open Access Journals (Sweden)

    Marleen E. Jansen

    2017-08-01

    Full Text Available Advances from pharmacogenetics (PGx have not been implemented into health care to the expected extent. One gap that will be addressed in this study is a lack of reporting on clinical validity and clinical utility of PGx-tests. A systematic review of current reporting in scientific literature was conducted on publications addressing PGx in the context of statins and muscle toxicity. Eighty-nine publications were included and information was selected on reported measures of effect, arguments, and accompanying conclusions. Most authors report associations to quantify the relationship between a genetic variation an outcome, such as adverse drug responses. Conclusions on the implementation of a PGx-test are generally based on these associations, without explicit mention of other measures relevant to evaluate the test's clinical validity and clinical utility. To gain insight in the clinical impact and select useful tests, additional outcomes are needed to estimate the clinical validity and utility, such as cost-effectiveness.

  4. Experimental implementation and proof of principle for a radionuclidic purity test solely based on half-life measurement

    DEFF Research Database (Denmark)

    Jørgensen, Thomas; Jensen, Mikael

    2016-01-01

    have developed an GUI application for use as an easy and automated test tool in the production procedure.The test results show that this method fully complies with the requirements in the European Pharmacopoeia (Eur. Ph.) for RNP of FDG and F-18 Sodium Fluoride. (C) 2015 Elsevier Ltd. All rights......In this paper we present the results of an experimental implementation of the method (Jorgensen et al., 2012) for testing the radionuclidic purity (RNP) of F-18 compounds.The overall limitations of the experimental methods and their possible impacts on RNP detectability have been identified. We...

  5. ACCOUNTABILITY INFLUENCE, TECHNICAL DIFFICULTY AND MEASUREMENT DIFFICULTY TOWARDS THE IMPLEMENTATION OF INDONESIAN STANDARD STATEMENT OF FINANCIAL ACCOUNTING (PSAK) NO. 27 (REVISED 1998) ABOUT COOPERATIVES ACCOUNTING IN EAST JAVA

    OpenAIRE

    ., Sutarto; ., Isnalita; ., Habiburrochman

    2008-01-01

    Financial report is a tool for business entity to deliver information to stakeholders. Thedifference of user’s interests causes that the financial report needs to be audited by theindependent auditor, to make sure fairness and conform with accounting standard. Thecooperatives managers must conduct the rule stated in accounting standard. Thus, thatthe Accountability, Technical Difficulty, Measurement Difficulty are the basic to realizethe implementation of cooperative accounting standard. The ...

  6. Accountability Influence, Technical Difficulty and Measurement Difficulty Towards the Implementation of Indonesian Standard Statement of Financial Accounting (PSAK) No. 27 (Revised 1998) About Cooperatives Accounting in East Java

    OpenAIRE

    Habiburrahman, Sutarto Isnalita

    2008-01-01

    Financial report is a tool for business entity to deliver information to stakeholders. Thedifference of user's interests causes that the financial report needs to be audited by theindependent auditor, to make sure fairness and conform with accounting standard. Thecooperatives managers must conduct the rule stated in accounting standard. Thus, thatthe Accountability, Technical Difficulty, Measurement Difficulty are the basic to realizethe implementation of cooperative accounting standard. The...

  7. Raising the profile of pilot and feasibility studies in relation to the development, evaluation and implementation of patient-reported outcome measures.

    OpenAIRE

    Jones, GL

    2017-01-01

    This editorial introduces a new special series on the pilot and feasibility testing of patient-reported outcome measures (PROMs) in the on-line open access journal Pilot and Feasibility Studies. Pilot and feasibility studies are typically implemented to address issues of uncertainty before undertaking a larger definitive study such as a randomised controlled trial or large scale survey. This editorial considers the role that such pilot and feasibility testing plays in relation to the developm...

  8. Vulnerability to Urban Heat Island in São Paulo Municipality: An Approach to Support the Mitigation Measures Implementation in Urban Planning

    Directory of Open Access Journals (Sweden)

    Juliana Siqueira-Gay

    2017-10-01

    Full Text Available In the practice of urban and environmental planning, especially in the context of adaptation to environmental changes, there is a demand for studies that integrate social, economic and environmental information of the population and related risk. Particularly in large urban centers, waterproofing and verticalization have the potential to increase local air temperature, triggering the phenomenon of heat islands. Therefore, this phenomenon has side effects such as public health problems, pollution and changes in the air circulation. In view of the risks and consequences of the urban heat islands, this paper aims to analyze the priority areas for implementing measures to mitigate the effects of the urban heat islands phenomenon in São Paulo City (Brazil. A vulnerability index was proposed considering the social and environmental dimensions, relating the capacity of adaptation, sensitivity and exposure to the occurrence of the phenomenon of urban heat islands. Besides that, measures to mitigate the effects associated with heat islands in urban planning were identified. The central regions are critical for exposure and the outskirts, for adaptive capacity and sensitivity, both considered priorities for the implementation of mitigation measures. In addition, strategies such as implementation and conservation of green spaces, preservation of water bodies, urban design change, as well as use of materials with high reflectance are also listed and partially foreseen in the Municipal Strategic Master Plan to mitigate the effects of urban heat island.

  9. Automated transport and sorting system in a large reference laboratory: part 2. Implementation of the system and performance measures over three years.

    Science.gov (United States)

    Hawker, Charles D; Roberts, William L; Garr, Susan B; Hamilton, Leslie T; Penrose, John R; Ashwood, Edward R; Weiss, Ronald L

    2002-10-01

    Our laboratory implemented a major automation system in November 1998. A related report describes a 4-year process of evaluation and planning leading to system installation. This report describes the implementation and performance results over 3 years since the system was placed into use. Project management software was used to track the project. Turnaround times of our top 500 tests before and after automation were measured. We compared the rate of hiring of employees and the billed unit per employee ratio before and after automation by use of linear regression analysis. Finally, we analyzed the financial contribution of the project through an analysis of return on investment. Since implementation, the volume of work transported and sorted has grown to >15,000 new tubes and >25,000 total tubes per day. Median turnaround time has decreased by an estimated 7 h, and turnaround time at the 95th percentile has decreased by 12 h. Lost specimens have decreased by 58%. A comparison of pre- and post-implementation hiring rates of employees estimated a savings of 33.6 employees, whereas a similar comparison of ratios of billed units per employee estimated a savings of 49.1 employees. Using the higher figure, we estimated that the $4.02 million cost of the project would be paid off approximately 4.9 years subsequent to placing the system into daily use. The overall automation project implemented in our laboratory has contributed considerably to improvement of key performance measures and has met our original project objectives.

  10. Implementation of New Reactivity Measurement System and New Reactor Noise Analysis Equipment in a VVER-440 Nuclear Power Plant

    Science.gov (United States)

    Vegh, János; Kiss, Sándor; Lipcsei, Sándor; Horvath, Csaba; Pos, István; Kiss, Gábor

    2010-10-01

    The paper deals with two recently developed, high-precision nuclear measurement systems installed at the VVER-440 units of the Hungarian Paks NPP. Both developments were motivated by the reactor power increase to 108%, and by the planned plant service time extension. The first part describes the RMR start-up reactivity measurement system with advanced services. High-precision picoampere meters were installed at each reactor unit and measured ionization chamber current signals are handled by a portable computer providing data acquisition and online reactivity calculation service. Detailed offline evaluation and analysis of reactor start-up measurements can be performed on the portable unit, too. The second part of the paper describes a new reactor noise diagnostics system using state-of-the-art data acquisition hardware and signal processing methods. Details of the new reactor noise measurement evaluation software are also outlined. Noise diagnostics at Paks NPP is a standard tool for core anomaly detection and for long-term noise trend monitoring. Regular application of these systems is illustrated by real plant data, e.g., results of standard reactivity measurements during a reactor startup session are given. Noise applications are also illustrated by real plant measurements; results of core anomaly detection are presented.

  11. An Experimental Performance Measurement of Implemented Wireless Access Point for Interworking Wi-Fi and HSDPA Networks

    Science.gov (United States)

    Byun, Tae-Young

    This paper presents a prototype of WAP(Wireless Access Point) that provides the wireless Internet access anywhere. Implemented WAP can be equipped with various wireless WAN interfaces such as WCDMA and HSDPA. WAP in the IP mechanism has to process connection setup procedure to one wireless WAN. Also, WAP can provide connection management procedures to reconnect interrupted connection automatically. By using WAP, several mobile devices such as netbook, UMPC and smart-phone in a moving vehicle can access to HSDPA network simultaneously. So, it has more convenient for using the WAP when there are needs to access wireless Internet more than two mobile devices in restricted spaces such as car, train and ship.

  12. Insuring quality during implementation of a SPEDT method of regional cerebral blood flow measurements into daily routine

    International Nuclear Information System (INIS)

    Mathiassen, B.; Landsfeldt, U.S.; Broechner-Mortensen, J.; Andersen, A.R.; Pedersen, B.; Roedbro, P.

    1995-01-01

    The present aim was to describe a method for quality insurance when a previously experimental technique is implemented for daily clinical use. Regional cerebral blood flow (rCBF) was studied in 24 patients with medically intractable complex partial epilepsy using SPECT of the Tc99m-HMPAO distribution. The colour-coded rCBF images were evaluated visually four times by four observers who classified each data set into one of four ranked classes (normal, slightly - , median - or severely abnormal). The visual analysis was compared to the results obtained by an expert (the standard). After two evaluation rounds a teaching session of image interpretation was performed with emphasis on the most difficult problem cases. The results of the primary evaluation and the yield of the teaching round was assessed by error-points depending on the magnitude of the misinterpretation of each data set. Interobserver discrepancies was analyzed by Friedman's test of variance, while intra-observer variability was evaluated by Wilcoxon's paired non-parametric test. The teaching round improved the performance of the four observers significantly (p=0.0004), but not to the wanted quality standard for all observers. The reproducibility was improved in all, but not significantly. The insurance of quality during implementation of a new diagnostic method can thus be performed in a simple way providing the steering team with identification of problems, as well as inspiration to solution of critical problems. The presented quality insurance method can easily be performed when other imaging modalities are started or when quality control of a routine method is needed. (au)

  13. Development and Pilot Test of the Workplace Readiness Questionnaire, a Theory-Based Instrument to Measure Small Workplaces' Readiness to Implement Wellness Programs.

    Science.gov (United States)

    Hannon, Peggy A; Helfrich, Christian D; Chan, K Gary; Allen, Claire L; Hammerback, Kristen; Kohn, Marlana J; Parrish, Amanda T; Weiner, Bryan J; Harris, Jeffrey R

    2017-01-01

    To develop a theory-based questionnaire to assess readiness for change in small workplaces adopting wellness programs. In developing our scale, we first tested items via "think-aloud" interviews. We tested the revised items in a cross-sectional quantitative telephone survey. The study setting comprised small workplaces (20-250 employees) in low-wage industries. Decision-makers representing small workplaces in King County, Washington (think-aloud interviews, n = 9), and the United States (telephone survey, n = 201) served as study subjects. We generated items for each construct in Weiner's theory of organizational readiness for change. We also measured workplace characteristics and current implementation of workplace wellness programs. We assessed reliability by coefficient alpha for each of the readiness questionnaire subscales. We tested the association of all subscales with employers' current implementation of wellness policies, programs, and communications, and conducted a path analysis to test the associations in the theory of organizational readiness to change. Each of the readiness subscales exhibited acceptable internal reliability (coefficient alpha range, .75-.88) and was positively associated with wellness program implementation ( p < .05). The path analysis was consistent with the theory of organizational readiness to change, except change efficacy did not predict change-related effort. We developed a new questionnaire to assess small workplaces' readiness to adopt and implement evidence-based wellness programs. Our findings also provide empirical validation of Weiner's theory of readiness for change.

  14. Implementation of tuberculosis infection control measures in designated hospitals in Zhejiang Province, China: are we doing enough to prevent nosocomial tuberculosis infections?

    Science.gov (United States)

    Chen, Bin; Liu, Min; Gu, Hua; Wang, Xiaomeng; Qiu, Wei; Shen, Jian; Jiang, Jianmin

    2016-03-03

    Tuberculosis (TB) infection control measures are very important to prevent nosocomial transmission and protect healthcare workers (HCWs) in hospitals. The TB infection control situation in TB treatment institutions in southeastern China has not been studied previously. Therefore, the aim of this study was to investigate the implementation of TB infection control measures in TB-designated hospitals in Zhejiang Province, China. Cross-sectional survey using observation and interviews. All TB-designated hospitals (n=88) in Zhejiang Province, China in 2014. Managerial, administrative, environmental and personal infection control measures were assessed using descriptive analyses and univariate logistic regression analysis. The TB-designated hospitals treated a median of 3030 outpatients (IQR 764-7094) and 279 patients with confirmed TB (IQR 154-459) annually, and 160 patients with TB (IQR 79-426) were hospitalised in the TB wards. Most infection control measures were performed by the TB-designated hospitals. Measures including regular monitoring of TB infection control in high-risk areas (49%), shortening the wait times (42%), and providing a separate waiting area for patients with suspected TB (46%) were sometimes neglected. N95 respirators were available in 85 (97%) hospitals, although only 44 (50%) hospitals checked that they fit. Hospitals with more TB staff and higher admission rates of patients with TB were more likely to set a dedicated sputum collection area and to conduct annual respirator fit testing. TB infection control measures were generally implemented by the TB-designated hospitals. Measures including separation of suspected patients, regular monitoring of infection control practices, and regular fit testing of respirators should be strengthened. Infection measures for sputum collection and respirator fit testing should be improved in hospitals with lower admission rates of patients with TB. Published by the BMJ Publishing Group Limited. For permission to

  15. Research and Implementation of Software Used for the Remote Control for VM700T Video Measuring Instrument

    Directory of Open Access Journals (Sweden)

    Song Wenjie

    2015-01-01

    Full Text Available In this paper, the measurement software which can be used to realize remote control of the VM700T video measuring instrument is introduced. The authors can operate VM700T by a virtual panel on the client computer, select the results that the measuring equipment displayed to transmit it, and then display the image on the VM700T virtual panel in real time. The system does have some practical values and play an important role in distance learning. The functions that the system realized mainly includes four aspects: the real-time transmission of message based on the socket technology, the serial connection between server PC and VM700T measuring equipment, the image acquisition based on VFW technology and JPEG compression and decompression, and the network transmission of image files. The actual network transmission test is shown that the data acquisition method of this thesis is flexible and convenient, and the system is of extraordinary stability. It can display the measurement results in real time and basically realize the requirements of remote control. In the content, this paper includes a summary of principle, the detailed introduction of the system realization process and some related technology.

  16. ESTUDIO DE CONCORDANCIA DE MEDICIONES RADIOLÓGICAS EN FRACTURAS SUPRACONDÍLEAS DE HÚMERO EN NIÑOS

    Directory of Open Access Journals (Sweden)

    Andrés Camilo Abril Aguilar

    2008-10-01

    Full Text Available Antecedente. En la valoración radiológica de las fracturas supracondíleas de codo en niños existen algunas mediciones utilizadas como el ángulo de Baumann, el ángulo de inclinación diafisario-condíleo, la línea humeral anterior y la valoración rotacional. No se dispone de evidencia acerca de la concordancia de estas mediciones y los parámetros para determinar un tratamiento o los resultados del mismo, bajo esos criterios. Objetivo. Determinar la concordancia de esas mediciones y su relación con el tratamiento de las fracturas supracondíleas de húmero en niños. Material y métodos. Diseño observacional, descriptivo, prospectivo de concordancia, de serie de casos de fracturas supracondíleas de húmero distal en niños. Se realizaron las mediciones pre y postoperatorias del ángulo de Baumman, ángulo humerocondilar, línea humeral anterior y porcentaje rotacional en la proyección lateral, por tres observadores para obtener la concordancia interobservador segunlos criterios de Landis y Koch para correlación interobservador e intraobservador. El análisis estadístico se obtuvo con la correlación con el valor Kappa en variables nominales y coeficiente de correlación de Pearson para variables continuas. Resultados. 27 niños con edad promedio de 5.7 años. La concordancia interobservador fue buena o excelente para todas las mediciones en la clasificación de Gartland, el tipo de fractura (extensión o flexión, en la medición del ángulo de Baumann pre y post tratamiento y en las evaluaciones de línea humeral anterior y porcentaje rotacional. Los valores fueron aceptables y pobres para las mediciones de la línea humeral anterior y porcentaje rotacional posterior al tratamiento y con mala correlación según los parámetros de Landis y Koch para los tratamientos elegidos y para la duración del mismo así como la aceptación de los resultados del tratamiento. Conclusión. Aunque la concordancia para las mediciones radiol

  17. Chances and Limitations of Implementing Measures of Differentiation for Gifted Children in Primary Schools: The Teachers’ Part

    Directory of Open Access Journals (Sweden)

    Martina Endepohls-Ulpe

    2014-06-01

    Full Text Available The presented study analyzes German primary school teachers’ attitudes towards several measures of internal differentiation with re-spect to the anticipated benefit for gifted pupils and the anticipated work load for teachers. Be-sides, correlations of these attitudes with teach-ers’ statements on the frequency of adopting the measures in their own classes were inspected. One-hundred thirty-seven teachers and teacher students were interviewed with a questionnaire on the assessed consequences and the fre-quency of the usage of several methods of dif-ferentiation. Data analysis was done by anal-yses of variance and calculation of Pearson cor-relation coefficients. Results show that teachers, as well as teacher students, mostly assessed the listed measures of internal differentiation to be appropriate for the promotion of gifted pupils, but for teachers there were significant negative correlations between assessed work load and frequency of usage in their own classes.

  18. SYSTEM CONTROL OF SMOKING PROCESS AND MEASURING BENZO[A]PYRENE IN TRADITIONAL PRODUCTION OF BOSNIAN DRY CURED HAM (BOSANSKI PRŠUT BY IMPLEMENTING HACCP SYSTEM

    Directory of Open Access Journals (Sweden)

    Almir Toroman

    2013-08-01

    Full Text Available As it is well known, traditional production of smoked meat products requires technological processes, which carry some food safety hazards (e.g. content of Benzo[a]pyrene. (B[a]P. “OMEGA COMERC Ltd.”, a member of the meat industry in Visoko region, has implemented food safety management system according to the recommendations from Codex Alimentarius CAC-RCP (9, recommended International Code of Practice - General Principles of Food Hygiene. By implementing HACCP system, the Company established adequate control measures in producing Bosnian dry cured ham (bosanski pršut on traditional way including the smoking process in the chambers. By doing this, they have created conditions to measure B[a]P content in the Bosnian dry cured ham and implement HACCP system without impairing traditional production and food safety of the final product.The aim of this study is to present the effect of the specific production process onto the meat smoking in order to preserve hygienic, nutritional and sensory values, and also to control B[a]P content in the final product.Key words: Bosnian dry cured ham, traditional production, smoking process, Benzo[a]pyrene, HACCP

  19. Using the Quadruple Aim Framework to Measure Impact of Heath Technology Implementation: A Case Study of eConsult.

    Science.gov (United States)

    Liddy, Clare; Keely, Erin

    2018-01-01

    Health technology solutions are too often implemented without a true understanding of the system-level problem they seek to address, resulting in excessive costs, poor adoption, ineffectiveness, and ultimately failure. Before implementing or adopting health care innovations, stakeholders should complete a thorough assessment to ensure effectiveness and value. In this article, we describe how to evaluate the impact of a health technology innovation through the 4 dimensions of care outlined by the Quadruple Aim Framework, using our experience with the Champlain Building Access to Specialists through eConsultation (BASE) eConsult service as a case example. A descriptive overview of data was collected between April 1, 2011, and August 31, 2017, using 4 dimensions of care outlined by the Quadruple Aim Framework: patient experience, provider experience, costs, and population health. Findings were drawn from use data, primary care provider closeout surveys, surveys/interviews with patients and provider, and costing data. Overall, patients have received access to specialist advice within days and find the advice useful in 86% of cases. Provider experience is very positive, with satisfaction ratings of high/very high value in 94% of cases. The service cost a weighted average of $47.35/case, compared with $133.60/case for traditional referrals. In total, 1,299 primary care providers have enrolled in the service, completing 28,838 cases since 2011. Monthly case volumes have grown from an average of 13 cases/month in 2011 to 969 cases/month in 2016. The eConsult service has been widely adopted in our region and is currently expanding to new jurisdictions across Canada. However, although we successfully demonstrated eConsult's impact on patient experience, provider satisfaction, and reducing costs, we met several challenges in evaluating its impact on population health. More work is needed to evaluate eConsult's impact on key population health metrics (eg, mortality, morbidity

  20. Design and implementation of an external quality assessment program for HIV viral load measurements using dried blood spots.

    Science.gov (United States)

    Prach, Lisa M; Puren, Adrian; Lippman, Sheri A; Carmona, Sergio; Stephenson, Sophie; Cutler, Ewalde; Barnhart, Scott; Liegler, Teri

    2015-03-01

    An external quality assurance program was developed for HIV-1 RNA viral load measurements taken from dried blood spots using a reference panel and field-collected specimens. The program demonstrated that accurate and reproducible quantitation can be obtained from field-collected specimens. Residual proviral DNA may confound interpretation in virologically suppressed subjects. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  1. A study to measure the impact of implementation of 5-S on pipe and profile: A case study of a pipe and profile maker

    Directory of Open Access Journals (Sweden)

    Hamidreza Karkehabadi

    2013-06-01

    Full Text Available Productivity improvement plays essential role on cost reduction and production planning in many organizations. There are literally various methods for measuring productivity and improving systems’ capabilities such as total quality management, 5S, etc. In this paper, we perform an empirical investigation to find out whether implementing 5S could reduce interruptions in production systems in one of pipe and profile manufacturing units located in province of Semnan, Iran. The proposed study compares the mean and standard deviations of waste materials before and after the implementation of 5-S in three different lines and statistical tests indicate that 5-S have made the necessary change on production planning and it could reduce waste materials, significantly.

  2. Changes in perceptions and motivators that influence the implementation of on-farm Salmonella control measures by pig farmers in England.

    Science.gov (United States)

    Marier, Elizabeth; Piers Smith, Richard; Ellis-Iversen, Johanne; Watson, Eamon; Armstrong, Derek; Hogeveen, Henk; Cook, Alasdair J C

    2016-10-01

    This study presents British farmers' perception of, and barriers to, implementing Salmonella control on pig farms. Four farms that had implemented interventions and their 33 close contacts (known to the intervention farmers) took part in interviews before (phase 1) and after (phase 2) intervention trials to assess the difference in perception over time. Their results were compared against those from nine randomly selected control farms. The hypothesis was that farms implementing interventions whether or not successful, would influence their close contacts' opinion over time. Based on a 'pathway to disease control' model, three intrinsic factors known to influence motivation - attitudes, social norms and self-efficacy - were evaluated. Farmers mentioned that successful interventions on a farm would attract their attention. The use of an appropriate communication strategy is therefore recommended to stimulate farmers' intent to implement control measures. Both before and after the intervention trials, all farmers had a positive attitude towards Salmonella control and felt that their peers and authorities were supportive of controlling Salmonella on farms. In phase 2, however, farmers were more likely to want to share the burden of control with other stakeholders along the food chain and their belief in self-efficacy had weakened. Whilst social norms were not associated with an intention to take action on control, a positive attitude towards Salmonella control and a belief in self-efficacy were more likely to result in an intent to control. In phase 2, farmers with an intent to implement an intervention appeared to have a greater, but not significant positive belief in self-efficacy (p=0.108). This study confirmed that farmers recognised their responsibility for controlling Salmonella in pork - even though their confidence in their ability to control Salmonella decreased over time - and believed that responsibility should be shared with the rest of the production

  3. Implementation of Portable Emissions Measurement Systems (PEMS) for the Real-driving Emissions (RDE) Regulation in Europe.

    Science.gov (United States)

    Giechaskiel, Barouch; Vlachos, Theodoros; Riccobono, Francesco; Forni, Fausto; Colombo, Rinaldo; Montigny, Francois; Le-Lijour, Philippe; Carriero, Massimo; Bonnel, Pierre; Weiss, Martin

    2016-12-04

    Vehicles are tested in controlled and relatively narrow laboratory conditions to determine their official emission values and reference fuel consumption. However, on the road, ambient and driving conditions can vary over a wide range, sometimes causing emissions to be higher than those measured in the laboratory. For this reason, the European Commission has developed a complementary Real-Driving Emissions (RDE) test procedure using the Portable Emissions Measurement Systems (PEMS) to verify gaseous pollutant and particle number emissions during a wide range of normal operating conditions on the road. This paper presents the newly-adopted RDE test procedure, differentiating six steps: 1) vehicle selection, 2) vehicle preparation, 3) trip design, 4) trip execution, 5) trip verification, and 6) calculation of emissions. Of these steps, vehicle preparation and trip execution are described in greater detail. Examples of trip verification and the calculations of emissions are given.

  4. Construct validity in Operations Management by using Rasch Measurement Theory. The case of the construct “motivation to implement continuous improvement"

    Directory of Open Access Journals (Sweden)

    Lidia Sanchez-Ruiz

    2016-12-01

    Full Text Available Construct design and validation is a common practise in the Operations Management field. In this sense, the aim of this study is to present Rasch Measurement Theory (RMT as richful and useful methodology in order to validate constructs. In order to do so, the measurement controversy in the social science is presented; then, RMT is explained as a solution for this measurement issue; after that, the different applications of RMT are described and, finally, the different stages of the validation process are presented. Thus, this work aims to serve as a guide for those researchers interested in the methodology. Therefore, a specific case is included: the validation of the construct “motivation to implement continuous improvement”.

  5. Guidelines on the implementation of radiation protection measures during diagnostic medical exposures of female patients of reproductive capacity

    International Nuclear Information System (INIS)

    2000-08-01

    These guidelines were produced in response to a perceived need for clear guidance concerning the implementation of the 10-day and 28-day rules regarding radiological radiation protection practices. At the outset it is important to emphasise that, in all cases, the seriousness of the clinical situation must be taken into account as being of paramount importance and an overriding consideration to the guidelines. Radiographs of the chest, skull and extremities may be done at any time, provided that best practices are adhered to. All requests for radiological examinations of female patients, which place the uterus in or near the primary X-ray beam, i.e. irradiation between the diaphragm and pubis, or nuclear medicine examinations which are likely to result in a dose to the unborn child up to 10 mGy, should include the date of the last menstrual period. The prescriber and practitioner or radiographer should ask a patient beyond day 10 of the menstrual cycle whether she might be pregnant. This enquiry and the patient's answer should be recorded in writing. If the answer is no, the examination may proceed. If the answer is yes or uncertain, the examination should not proceed. In cases of medical emergency, the practitioner or the prescriber, if necessary following discussion with the practitioner or radiographer and taking justification into account, may decide to proceed with the examination. The practitioner or prescriber must record this decision in writing and sign it. The 10-day rule is recommended for certain high dose examinations where the dose to the uterus is likely to exceed 10 mGy. These include a small number of diagnostic X-ray and nuclear medicine procedures. (author)

  6. Implementation Strategy

    Science.gov (United States)

    1983-01-01

    Meeting the identified needs of Earth science requires approaching EOS as an information system and not simply as one or more satellites with instruments. Six elements of strategy are outlined as follows: implementation of the individual discipline missions as currently planned; use of sustained observational capabilities offered by operational satellites without waiting for the launch of new mission; put first priority on the data system; deploy an Advanced Data Collection and Location System; put a substantial new observing capability in a low Earth orbit in such a way as to provide for sustained measurements; and group instruments to exploit their capabilities for synergism; maximize the scientific utility of the mission; and minimize the costs of implementation where possible.

  7. Implementation of a new gamma spectrometer on the MERARG loop: Application to the volatile fission products release measurement

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, S.; Gleizes, B.; Pontillon, Y.; Hanus, E.; Ducros, G. [CEA, DEN, DEC, SA3C, F-13108, Saint Paul lez Durance, (France); Roure, C. [CEA, DEN, DTN, SMTA, F-13108, Saint Paul lez Durance, (France)

    2015-07-01

    The MERARG facility initially aims at the annealing of irradiated fuel samples to study the gaseous fission products release kinetics. In order to complete the evaluation of the source term potentially released during accidental situation, the MERARG experimental circuit has been enhanced with a new gamma spectrometer. This one is directly sighting the fuel and is devoted to the fission products release kinetics. Because of the specificities of the fuel measurements, it has been dimensioned and designed to match the specific requirements. The acquisition chain and the collimation system have been optimized for this purpose and a first set of two experiments have shown the good functioning of this new spectrometry facility. (authors)

  8. CAN and FPGA communication engineering implementation of a CAN bus based measurement system on an FPGA development kit

    CERN Document Server

    Zhu, Yu

    2010-01-01

    Hauptbeschreibung The Controller Area Network (CAN), invented by Bosch in 1983, is a serial field bus protocol which was originally used in road vehicles and now is widely applied in other industrial fields. Since its birth automotive electronic engineers have been use Microcontrollers (MCU) to control the CAN bus. Today, as the Field-programmable Gate Array (FPGA) has become very advance, this book introduces a new method which uses an FPGA and a MCU jointly instead of a single MCU is to design a CAN bus measurement system. Furthermore the designed system should be able to work at the fastest

  9. Implementation of the corporate governance code as a measure of an efficiency increasing process in corporate management

    Directory of Open Access Journals (Sweden)

    Ana SPÎNU

    2017-03-01

    Full Text Available The majority of leaders of economic entities in Moldova should recognize the role of effective corporate management for the proper development of their activities. Therefore, to ensure obtaining competitive advantage, the leaders must accept the fact that the policy of improvement of corporate management becomes a major component of enterprise development, and using the principles and best practices of corporate governance are already highlighted both at the level of their enterprises and at international level. Therefore, the authors of the article present some measures to streamline corporate management.

  10. Measuring surgical outcomes in neurosurgery: implementation, analysis, and auditing a prospective series of more than 5000 procedures.

    Science.gov (United States)

    Theodosopoulos, Philip V; Ringer, Andrew J; McPherson, Christopher M; Warnick, Ronald E; Kuntz, Charles; Zuccarello, Mario; Tew, John M

    2012-11-01

    1 day for angiogram, anterior cervical discectomy with fusion, or lumbar discectomy. With prospectively collected outcome data for more than 5000 surgeries, the authors achieved their primary end point of institution-wide compliance and data accuracy. Components of this process included staged implementation with physician pilot studies and oversight, nurse participation, point-of-service data capture, EMR form modification, data auditing, and confidential surgeon reports.

  11. Characterization of Under-Building Contamination at Rocky Flats Implementing Environmental-Measurement While Drilling Process with Horizontal Directional Drilling

    International Nuclear Information System (INIS)

    WILLIAMS, CECELIA V.; LOCKWOOD, GRANT J.; NORMANN, RANDY A.; LINDSAY, THOMAS

    2001-01-01

    Characterization is required on thirty-one buildings at Rocky Flats Environmental Technology Site (RFETS or the Site) with known or suspected under building contamination. The Site has teamed with Sandia National Laboratory (SNL) to deploy Environmental Measure-While-Drilling (EMWD) in conjunction with horizontal directional drilling (HDD) to characterize under building contamination and to evaluate the performance and applicability for future characterization efforts. The Environmental Measurement-While-Drilling-Gamma Ray Spectrometer (EMWD-GRS) system represents an innovative blend of new and existing technology that provides the capability of producing real-time environmental drill bit data during drilling operations. The project investigated two locations, Building 886 and Building 123. Building 886 is currently undergoing D and D activities. Building 123 was demolished in 1998; however, the slab is present with under building process waste lines and utilities. This report presents the results of the EMWD Gamma Ray Spectrometer logging of boreholes at these two sites. No gamma emitting contamination was detected at either location.(author)

  12. Assessment of the implementation of a neutron measurement system during the commissioning of the Jordan Research and Training Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Sang Hoon; Suh, Sang Mun [Division of Research Reactor System Design, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Cha, Han Ju [Dept. of Electrical Engineering, Intelligent Power Conversion Laboratory, Chungnam National University, Daejeon (Korea, Republic of)

    2017-04-15

    The Jordan Research and Training Reactor (JRTR) is the first research reactor in Jordan, the commissioning of which is ongoing. The reactor is a 5-MWth, open-pool type, light-water-moderated, and cooled reactor with a heavy water reflector system. The neutron measurement system (NMS) applied to the JRTR employs a wide-range fission chamber that can cover from source range to power range. A high-sensitivity boron trifluoride counter was added to obtain more accurate measurements of the neutron signals and to calibrate the log power signals; the NMS has a major role in the entire commissioning stage. However, few case studies exist concerning the application of the NMS to a research reactor. This study introduces the features of the NMS and the boron trifluoride counter in the JRTR and shares valuable experiences from lessons learned from the system installation to its early commissioning. In particular, the background noise relative to the signal-to-noise ratio and the NMS signal interlock are elaborated. The results of the count rates with the neutron source and the effects of the discriminator threshold are summarized.

  13. Comparison of measurement methods with a mixed effects procedure accounting for replicated evaluations (COM3PARE): method comparison algorithm implementation for head and neck IGRT positional verification.

    Science.gov (United States)

    Roy, Anuradha; Fuller, Clifton D; Rosenthal, David I; Thomas, Charles R

    2015-08-28

    Comparison of imaging measurement devices in the absence of a gold-standard comparator remains a vexing problem; especially in scenarios where multiple, non-paired, replicated measurements occur, as in image-guided radiotherapy (IGRT). As the number of commercially available IGRT presents a challenge to determine whether different IGRT methods may be used interchangeably, an unmet need conceptually parsimonious and statistically robust method to evaluate the agreement between two methods with replicated observations. Consequently, we sought to determine, using an previously reported head and neck positional verification dataset, the feasibility and utility of a Comparison of Measurement Methods with the Mixed Effects Procedure Accounting for Replicated Evaluations (COM3PARE), a unified conceptual schema and analytic algorithm based upon Roy's linear mixed effects (LME) model with Kronecker product covariance structure in a doubly multivariate set-up, for IGRT method comparison. An anonymized dataset consisting of 100 paired coordinate (X/ measurements from a sequential series of head and neck cancer patients imaged near-simultaneously with cone beam CT (CBCT) and kilovoltage X-ray (KVX) imaging was used for model implementation. Software-suggested CBCT and KVX shifts for the lateral (X), vertical (Y) and longitudinal (Z) dimensions were evaluated for bias, inter-method (between-subject variation), intra-method (within-subject variation), and overall agreement using with a script implementing COM3PARE with the MIXED procedure of the statistical software package SAS (SAS Institute, Cary, NC, USA). COM3PARE showed statistically significant bias agreement and difference in inter-method between CBCT and KVX was observed in the Z-axis (both p - value<0.01). Intra-method and overall agreement differences were noted as statistically significant for both the X- and Z-axes (all p - value<0.01). Using pre-specified criteria, based on intra-method agreement, CBCT was deemed

  14. Outcome measures in European patients with haemophilia: Survey of implementation in routine clinical practice, perception of relevance and recommendations by European treaters in the EHTSB.

    Science.gov (United States)

    Hermans, C; Klamroth, R; Richards, M; de Moerloose, P; Garrido, R P

    2017-03-01

    This study was conducted to evaluate the current implementation of outcome measures in routine clinical haemophilia practice and to explore and appreciate the perception of the relevance of such measures by treaters. A survey was completed by 19 of the 26 physicians involved in the European Haemophilia Therapy Strategy Board (EHTSB). Employing an extensive inventory of outcome measures used in patients with haemophilia, information was collected about the frequency of data collection and the subjective appreciation of their importance during clinic review. The survey revealed that most treaters currently collect data that are mainly related to the haemostatic treatment (consumption of concentrates) and the bleeding symptoms (number and location of bleeds) in a non-uniform and non-standardized way. By contrast, functional, physical and quality of life scorings are rarely used and show considerable heterogeneity between treaters. Also, many disparities emerged between practice and perception, in particular quality of life data that are perceived as being important but for most of the time are not collected. This survey represents, in our view, the first attempt to evaluate the actual utilization of outcome measures in haemophilia care. While the value of outcome measures is appreciated, they are not assessed regularly. Therefore, there is a need to include appropriate performance indicators (outcome measures) of haemophilia care in routine clinical practice. Consensus recommendations to provide a framework for achieving this aim are provided. © 2016 John Wiley & Sons Ltd.

  15. Implementation of a robust hybrid rotary-translational vibration energy harvester for autonomous self-powered acceleration measurement

    Science.gov (United States)

    Payne, Owen R.; Vandewater, Luke A.; Ung, Chandarin; Moss, Scott D.

    2015-04-01

    In this paper, a self-powered wireless sensor node utilising ambient vibrations for power is described. The device consists of a vibration energy harvester, power management system, microcontroller, accelerometer, RF transmitter/receiver and external LED indicators. The vibration energy harvester is adapted from a previously reported hybrid rotary-translational device and uses a pair of copper coil transducers to convert the mechanical energy of a magnetic sphere into usable electricity. The device requires less than 0.8 mW of power to operate continuously in its present setup (with LED indicators off) while measuring acceleration at a sample rate of 200 Hz, with the power source providing 39.7 mW of power from 500 mg excitations at 5.5 Hz. When usable input energy is removed, the device will continue to transmit data for more than 5 minutes.

  16. The role of the implementation angle of cuttings of Phyllanthus sellowianus as a reference for a soil protection measure against surface erosion

    Science.gov (United States)

    Rauch, H. P.; Sutili, F. J.; Aschbacher, M.; Müller, B.

    2009-04-01

    Cutting plantation is a very common method of soil bioengineering techniques. The potential of vegetative reproduction is used to install a vegetation cover on eroded slopes to prevent surface erosion. The development of above and below biomass from parts of the stock plant in a very short time and the fast and easy propagation are one of the most important advantages of this soil bioengineering type. Several handbooks (Schiechtl, 1992; Florineth, 2004 and Zeh, 2007) suggest potential plants for vegetative reproduction and describe the procedure of plantation in detail. It is recommended that the cuttings are not driven vertically into the ground. A flat implementation angle guarantees a more uniform rooting of the cutting part driven into the soil, however there are no systematically investigations of the impact of the implementation angle on the biomass performance and consequently on the performance as a surface erosion protection measure. This paper shows results from field investigations focusing on the problem of the impact of the implementation angle of cuttings. In sum 75 specimens of the species of Phyllanthus sellowianus. The plant species was recommended as a native potential soil bioengineering plant by Sutili (s. Sutili, 2006). The cuttings were planted with an average length of 50 cm and diameter of 2 cm. The implementation angle differences between 90 (vertical) 45 and 10 degree. Two months after plantation all plants were excavated and the relevant plant data sets were collected in order to analyse the biomass performance. The field investigations are part of an integrated research project of the University of Natural Resources and Applied Life Sciences, Vienna and the Federal University of Santa Maria, Rio Grande do Sul - Brazil.

  17. Implementation of Optical Meanders in the Temperature Measurement of the Extermination of Basidiomycete Serpula Lacrymans Using Microwave Heating

    Directory of Open Access Journals (Sweden)

    Andrej Liner

    2013-01-01

    Full Text Available The dry rot basidiomycete Serpula lacrymans is the most common and destructive wood decay fungus, which attacks and damages houses and other wooden construction worldwide [1], [2]. Effective chemicals have been developed for remediation and treatment of dry rot outbreaks and for wood preservation against dry rot, but in most cases, control is most economically achieved by environmental management to avoid creating favourable growth conditions for the fungus [3]. Thermal treatment using microwaves represents one of possible approaches in fungal growth control and refurbishment of damaged wooden constructions. One of the possibilities, how to monitor this whole process seems to be the use of Optical fiber DTS (Distribution Temperature Systems. The Optical fiber DTS are unique distributed temperature systems using optical fiber as a sensor. Due to the electromagnetic resistance is this system suitable for the monitoring of these processes. This article deals with application of optical meanders in the temperature measurement during the extermination of basidiomycete Serpula lacrymans using microwave heating. Because of the adverse effect of microwave radiation on all other types of temperature sensors.

  18. Measuring movement towards improved emergency obstetric care in rural Kenya with implementation of the PRONTO simulation and team training program.

    Science.gov (United States)

    Dettinger, Julia C; Kamau, Stephen; Calkins, Kimberly; Cohen, Susanna R; Cranmer, John; Kibore, Minnie; Gachuno, Onesmus; Walker, Dilys

    2018-02-01

    As the proportion of facility-based births increases, so does the need to ensure that mothers and their newborns receive quality care. Developing facility-oriented obstetric and neonatal training programs grounded in principles of teamwork utilizing simulation-based training for emergency response is an important strategy for improving the quality care. This study uses 3 dimensions of the Kirkpatrick Model to measure the impact of PRONTO International (PRONTO) simulation-based training as part of the Linda Afya ya Mama na Mtoto (LAMMP, Protect the Health of mother and child) in Kenya. Changes in knowledge of obstetric and neonatal emergency response, self-efficacy, and teamwork were analyzed using longitudinal, fixed-effects, linear regression models. Participants from 26 facilities participated in the training between 2013 and 2014. The results demonstrate improvements in knowledge, self-efficacy, and teamwork self-assessment. When comparing pre-Module I scores with post-training scores, improvements range from 9 to 24 percentage points (p values strategic goals was high: 95.8% of the 192 strategic goals. Participants rated the PRONTO intervention as extremely useful, with an overall score of 1.4 out of 5 (1, extremely useful; 5, not at all useful). Evaluation of how these improvements affect maternal and perinatal clinical outcomes is forthcoming. © 2018 John Wiley & Sons Ltd.

  19. SEATCA Tobacco Industry Interference Index: a tool for measuring implementation of WHO Framework Convention on Tobacco Control Article 5.3

    Science.gov (United States)

    Assunta, Mary; Dorotheo, E Ulysses

    2016-01-01

    Objective To measure the implementation of WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 at country level using a new Tobacco Industry Interference Index and to report initial results using this index in seven Southeast Asian countries. Methods Score sheet based on WHO FCTC Article 5.3 Guidelines sent to correspondents in seven Southeast Asian countries, using a scoring system designed with the help of tobacco control experts and validated through focused group discussions. Results The seven countries ranked from the lowest level of interference to the highest are Brunei, Thailand, Lao PDR, Cambodia, Philippines, Malaysia and Indonesia. Countries that face high levels of unnecessary interaction with the tobacco industry also face high levels of tobacco industry influence in policy development. Most governments do not allow any tobacco industry representatives on their delegation to sessions of the Conference of the Parties or its subsidiary bodies nor accept their sponsorship for delegates, but most governments still accept or endorse offers of assistance from the tobacco industry in implementing tobacco control policies. Most governments also receive tobacco industry contributions (monetary or in kind) or endorse industry corporate social responsibility activities. Governments do not have a procedure for disclosing interactions with the tobacco industry, but Lao PDR, Philippines and Thailand have instituted measures to prevent or reduce industry interference. Conclusions This Tobacco Industry Interference Index, based on the WHO FCTC Article 5.3 Guidelines, is a useful advocacy tool for identifying both progress and gaps in national efforts at implementing WHO FCTC Article 5.3. PMID:25908597

  20. SEATCA Tobacco Industry Interference Index: a tool for measuring implementation of WHO Framework Convention on Tobacco Control Article 5.3.

    Science.gov (United States)

    Assunta, Mary; Dorotheo, E Ulysses

    2016-05-01

    To measure the implementation of WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 at country level using a new Tobacco Industry Interference Index and to report initial results using this index in seven Southeast Asian countries. Score sheet based on WHO FCTC Article 5.3 Guidelines sent to correspondents in seven Southeast Asian countries, using a scoring system designed with the help of tobacco control experts and validated through focused group discussions. The seven countries ranked from the lowest level of interference to the highest are Brunei, Thailand, Lao PDR, Cambodia, Philippines, Malaysia and Indonesia. Countries that face high levels of unnecessary interaction with the tobacco industry also face high levels of tobacco industry influence in policy development. Most governments do not allow any tobacco industry representatives on their delegation to sessions of the Conference of the Parties or its subsidiary bodies nor accept their sponsorship for delegates, but most governments still accept or endorse offers of assistance from the tobacco industry in implementing tobacco control policies. Most governments also receive tobacco industry contributions (monetary or in kind) or endorse industry corporate social responsibility activities. Governments do not have a procedure for disclosing interactions with the tobacco industry, but Lao PDR, Philippines and Thailand have instituted measures to prevent or reduce industry interference. This Tobacco Industry Interference Index, based on the WHO FCTC Article 5.3 Guidelines, is a useful advocacy tool for identifying both progress and gaps in national efforts at implementing WHO FCTC Article 5.3. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  1. Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Solar Dynamics Observatory-Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

    Science.gov (United States)

    Couvidat, S.; Zhao, J.; Birch, A. C.; Kosovichev, A. G.; Duvall, Thomas L., Jr.; Parchevsky, K.; Scherrer, P. H.

    2010-01-01

    The Helioseismic and Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler-velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time - distance helioseismology pipeline (Zhao et al., Solar Phys. submitted, 2010) has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross-covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time - distance helioseismology: a Gabor-wavelet fitting (Kosovichev and Duvall, SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, Astrophys. J. 571, 966, 2002), and a linearized version of the minimization method (Gizon and Birch, Astrophys. J. 614, 472, 2004). Using Doppler-velocity data from the Michelson Doppler Imager (MDI) instrument onboard SOHO, we tested and compared these definitions for the mean and difference traveltime perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet-Sun region, the method of Gizon and Birch (Astrophys. J. 614, 472, 2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (SCORE'96: Solar Convection and Oscillations and Their Relationship, ASSL, Dordrecht, 241, 1997) and Gizon and Birch (Astrophys. J. 571, 966, 2002). We investigated the relationships among

  2. Implementation and Comparison of Acoustic Travel-Time Measurement Procedures for the Helioseismic and Magnetic Imager Time-Distance Helioseismology Pipeline

    Science.gov (United States)

    Couvidat, S.; Zhao, J.; Birch, A. C.; Kosovichev, A. G.; Duvall, T. L., Jr.; Parchevsky, K.; Scherrer, P. H.

    2009-01-01

    The Helioseismic and Magnetic Imager (HMI) instrument on board the Solar Dynamics Observatory (SDO) satellite is designed to produce high-resolution Doppler velocity maps of oscillations at the solar surface with high temporal cadence. To take advantage of these high-quality oscillation data, a time-distance helioseismology pipeline has been implemented at the Joint Science Operations Center (JSOC) at Stanford University. The aim of this pipeline is to generate maps of acoustic travel times from oscillations on the solar surface, and to infer subsurface 3D flow velocities and sound-speed perturbations. The wave travel times are measured from cross covariances of the observed solar oscillation signals. For implementation into the pipeline we have investigated three different travel-time definitions developed in time-distance helioseismology: a Gabor wavelet fitting (Kosovichev and Duvall, 1997), a minimization relative to a reference cross-covariance function (Gizon and Birch, 2002), and a linearized version of the minimization method (Gizon and Birch, 2004). Using Doppler velocity data from the Michelson Doppler Imager (MDI) instrument on board SOHO, we tested and compared these definitions for the mean and difference travel-time perturbations measured from reciprocal signals. Although all three procedures return similar travel times in a quiet Sun region, the method of Gizon and Birch (2004) gives travel times that are significantly different from the others in a magnetic (active) region. Thus, for the pipeline implementation we chose the procedures of Kosovichev and Duvall (1997) and Gizon and Birch (2002). We investigated the relationships among these three travel-time definitions, their sensitivities to fitting parameters, and estimated the random errors they produce

  3. Concluding report by the committee of experts on the Brunsbuettel and Kruemmel nuclear power stations. Vattenfall to implement the set of measures and all recommendations

    International Nuclear Information System (INIS)

    Hassa, R.

    2007-01-01

    The independent Committee of Experts appointed by Vattenfall Europe after the events of June 28, 2007 in the Brunsbuettel and Kruemmel nuclear power stations concluded its investigations. The Committee had been asked to investigate and evaluate the situation associated with the events, and to elaborate proposals for improvement on this basis. The analysis by the Committee of Experts boils down to the finding that the Brunsbuettel and Kruemmel nuclear power stations represent a modern standard as far as design concepts and technical safety features are concerned. Besides technical preconditions, also the administrative features are in place for safe plant oepration. No indications were found of any deficits in safety culture which would justify doubt about the reliability of the operator or the staff responsible under the Atomic Energy Act, nor is there any doubt about the level of technical expertise. Vattenfall directly ordered the findings to be implemented by applying, for part of the technical measures, for implementation with the Kiel State Ministry for Social Affairs as the competent regulatory agency. The Vattenfall Group is going to establish a new safety organization and safety controlling for the nuclear power plants operated by the company. These measures are to ensure an optimum safety level and the highest safety standards. With Vattenfall, safety enjoys top priority. (orig.)

  4. Implementation of radon measurements to evaluate the suitability of using cement containers for storing radioactive waste containing Ra-226

    International Nuclear Information System (INIS)

    Shweikani, R.; Kheituo, M.; Hushari, M.; Ali, A. F.

    2003-12-01

    This work aimed at studying radon diffusion through walls of cubic cement containers containing inside radioactive waste rich in Radium-226. In addition, the effect of the wall thickness on radon exhalation and external gamma exposure were also studded. Cubic cement molds were prepared with different dimensions ranged from 5 to 11 cm containing central cubic holes to contain the radioactive materials with dimensions ranged from 2 to 7 cm. The thicknesses of the walls were varied from 1 to 4 cm. Radon exhalation was studied by placing each pre-prepared cement specimen in a tightly closed glass container (desiccators, volume 7 liters) provided with input and output gas system circulation for one week. Active method (Lucas cell) was used to measure the concentration of radon in the container. It was noticed that radon concentration increased with the increase of the radioactive materials inside the specimens. This was simply explained as it is due to the increase of the amount of radium-226 in the specimen with will definitely lead to the increase of radon production. In addition, it was noticed that radon concentration were increased by increasing the thickness of the specimen wall for fixed amount of the radioactive materials inside. This result was unexpected. Therefore, many attempts were performed to explain it. For that, the mechanism of cement solidifications and structure of cement after solidification were studied. The conditions which affect the size and number of the formed pores in the specimens were also studied assuming that increasing the wall thickness will increase porosity and lead to the increase diffusion paths. It was concluded that it is possible to use the cubic cement containers to stop gamma radiation from the radioactive materials, but it is not possible to use them to stop radon unless special arrangements are performed. (author)

  5. Breakout: An Open Measurement and Intervention Tool for Distributed Peer Learning Groups

    OpenAIRE

    Calacci, Dan; Lederman, Oren; Shrier, David; Pentland, Alex 'Sandy'

    2016-01-01

    We present Breakout, a group interaction platform for online courses that enables the creation and measurement of face-to-face peer learning groups in online settings. Breakout is designed to help students easily engage in synchronous, video breakout session based peer learning in settings that otherwise force students to rely on asynchronous text-based communication. The platform also offers data collection and intervention tools for studying the communication patterns inherent in online lea...

  6. A bottom up approach to implementing multi-purpose mitigation measures for reducing flood risk and improving water quality in agricultural catchments

    Science.gov (United States)

    Wilkinson, M. E.; Quinn, P. F.; Jonczyk, J.; Burke, S.; Nicholson, A.; Barber, N.; Owen, G.; Palmer, M.

    2012-04-01

    A number of studies have suggested that there is evidence that modern land-use management practices have increased surface runoff at the local scale. There is an urgent need for interventions to reduce the risk of flooding whilst also delivering multiple benefits (doing more for less). There are many settlements, which regularly suffer from flooding, which would benefit from upstream mitigation measures. Interventions at the source of runoff generation can have a positive impact on the flood hydrograph downstream. An integrated approach to managing runoff can also have multiple benefits on pollution and ecology, which could lead to beneficial impacts at the catchment scale. Belford, a small community in Northumberland, UK has suffered from an increased number of flood events over the past ten years. There is currently support within the English and Welsh Environment Agency for sustainable flood management solutions such as storage ponds, wetlands, beaver dams and willow riparian features which are being trialled at Belford. These runoff attenuation features (RAFs) also have benefits to water quality, capture sediment and create new ecological zones. Although the process by which numerous RAFs were deployed in Belford proved initially difficult to achieve within the existing regulatory framework, an efficient uptake process is now supported by local regulators including several branches of the Environment Agency. The Belford runoff management framework provides a step by step guide to implementing mitigation measures in the Belford burn catchment and could be easily applied to other catchments at a similar scale. The approach is based on implementing mitigation measures through engaging with catchment stakeholders and using solid field science and management protocols.

  7. Implementation and verification of a four-probe motion error measurement system for a large-scale roll lathe used in hybrid manufacturing

    International Nuclear Information System (INIS)

    Chen, Yuan-Liu; Niu, Zengyuan; Matsuura, Daiki; Lee, Jung Chul; Shimizu, Yuki; Gao, Wei; Oh, Jeong Seok; Park, Chun Hong

    2017-01-01

    In this paper, a four-probe measurement system is implemented and verified for the carriage slide motion error measurement of a large-scale roll lathe used in hybrid manufacturing where a laser machining probe and a diamond cutting tool are placed on two sides of a roll workpiece for manufacturing. The motion error of the carriage slide of the roll lathe is composed of two straightness motion error components and two parallelism motion error components in the vertical and horizontal planes. Four displacement measurement probes, which are mounted on the carriage slide with respect to four opposing sides of the roll workpiece, are employed for the measurement. Firstly, based on the reversal technique, the four probes are moved by the carriage slide to scan the roll workpiece before and after a 180-degree rotation of the roll workpiece. Taking into consideration the fact that the machining accuracy of the lathe is influenced by not only the carriage slide motion error but also the gravity deformation of the large-scale roll workpiece due to its heavy weight, the vertical motion error is thus characterized relating to the deformed axis of the roll workpiece. The horizontal straightness motion error can also be synchronously obtained based on the reversal technique. In addition, based on an error separation algorithm, the vertical and horizontal parallelism motion error components are identified by scanning the rotating roll workpiece at the start and the end positions of the carriage slide, respectively. The feasibility and reliability of the proposed motion error measurement system are demonstrated by the experimental results and the measurement uncertainty analysis. (paper)

  8. Implementation and verification of a four-probe motion error measurement system for a large-scale roll lathe used in hybrid manufacturing

    Science.gov (United States)

    Chen, Yuan-Liu; Niu, Zengyuan; Matsuura, Daiki; Lee, Jung Chul; Shimizu, Yuki; Gao, Wei; Oh, Jeong Seok; Park, Chun Hong

    2017-10-01

    In this paper, a four-probe measurement system is implemented and verified for the carriage slide motion error measurement of a large-scale roll lathe used in hybrid manufacturing where a laser machining probe and a diamond cutting tool are placed on two sides of a roll workpiece for manufacturing. The motion error of the carriage slide of the roll lathe is composed of two straightness motion error components and two parallelism motion error components in the vertical and horizontal planes. Four displacement measurement probes, which are mounted on the carriage slide with respect to four opposing sides of the roll workpiece, are employed for the measurement. Firstly, based on the reversal technique, the four probes are moved by the carriage slide to scan the roll workpiece before and after a 180-degree rotation of the roll workpiece. Taking into consideration the fact that the machining accuracy of the lathe is influenced by not only the carriage slide motion error but also the gravity deformation of the large-scale roll workpiece due to its heavy weight, the vertical motion error is thus characterized relating to the deformed axis of the roll workpiece. The horizontal straightness motion error can also be synchronously obtained based on the reversal technique. In addition, based on an error separation algorithm, the vertical and horizontal parallelism motion error components are identified by scanning the rotating roll workpiece at the start and the end positions of the carriage slide, respectively. The feasibility and reliability of the proposed motion error measurement system are demonstrated by the experimental results and the measurement uncertainty analysis.

  9. Design and implementation of a virtual laboratory of radiation measurement; Diseno e implementacion de un laboratorio virtual de medicion de radiaciones

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez T, J. R.; Morales S, J. B. [Facultad de Ingenieria, UNAM, Ciudad Universitaria, 04510 Mexico, D. F. (Mexico)], e-mail: jms0620@yahoo.com.mx

    2009-10-15

    The work involves the implementation of a virtual laboratory, this project is conducted in the Faculty of Engineering of National Autonomous University of Mexico with the name of LANUVI. It is intended that the laboratory can be used by students who have interest in the nuclear radiation knowledge as well as in its detection and attenuation, in addition serve as and introduction to nuclear systems. In the first part of project will conduct a source that can simulate the particle radiation of Alfa, beta, neutrons and gamma rays. The project will take sources used in class laboratories and elements that are dangerous but are used in different practical applications. After taking the source analyzing the particles behaviour in different media like air, animal tissue, aluminium, lead, etc. The analysis is done in different ways in order to know with which material can stop or mitigate the different types of radiation. Finally shall be measure radioactivity with different types of detectors. At this point, has the behaviour of ionization chamber but in the future is expected to make the simulation of some other radiation detectors. The mathematical models we represent the behaviour of these cases were implemented in free software. The program will be used to implement the virtual laboratory with radiation sources, detectors and different types of shields will be Blender which is a free software that is used by many users for the embodiment of games but try to use as a tool to help visualize the different equipment that is widely used in a radioactive materials laboratory. (Author)

  10. Seed bank from soil of coffee plantations associated with grevillea trees Banco de sementes do solo proveniente de cafezais arborizados com grevílea

    Directory of Open Access Journals (Sweden)

    M.A.F. Santos

    2008-01-01

    Full Text Available This study aimed to study the composition and dynamics of seed bank from soil of coffee plantations associated with grevilea trees in the experimental fields of the Southwest Bahia State University, on Vitória da Conquista campus. The experiments were carried out from September 2006 to May 2007. The coffee trees (Coffea arabica were sown at three x one m spacing, associated with grevillea trees (Grevillea robusta and maintained at densities of 277, 139, 123, 69, 62 and 31 plants ha-1, under direct sunlight. One hundred grams of soil were taken from each treatment with four repetitions and later identified and counted with a 10x magnifying glass. To determine seedling emergence, four soil samples of 1000 g were collected from each experimental field and transported to the greenhouse. Seedling emergence was observed by counts after 15, 30 and 45 days. The experimental design was randomized blocks of seven treatments (soil from different tree densities and four replicates; the experimental unit consisted of a plastic tray (0, 30 x 0.22 x 0.06 m containing 1.000 g of soil. The variables utilized to characterize the bank and its dynamics were: relative frequency, relative density, relative abundance, importance index and species diversity (Shannon-Weaver index.Increased number of monocotyledon seeds and sprouts were verified in the treatments maintained under full sunlight.Com o objetivo de estudar a composição e a dinâmica do banco de sementes provenientes de solos de cafezais arborizados com grevíleas, desenvolveu-se um ensaio no campo experimental da Universidade Estadual do Sudoeste da Bahia, no campus de Vitória da Conquista. Os cafeeiros (Coffea arabica foram dispostos em espaçamento de 3 x 1 m, associados a grevíleas (Grevillea robusta mantidas em densidades de 277, 139, 123, 69, 62 e 31 plantas ha-1, e a pleno sol, no período de setembro de 2006 a maio de 2007. Para avaliação do número de sementes, foram retirados 100 g de solo de

  11. Implementing a physical soil water flow model with minimal soil characteristics and added value offered by surface soil moisture measurements assimilation.

    Science.gov (United States)

    Chanzy, André

    2010-05-01

    Soil moisture is a key variable for many soil physical and biogeochemical processes. Its dynamic results from water fluxes in soil and at its boundaries, as well as soil water storage properties. If the water flows are dominated by diffusive processes, modelling approaches based on the Richard's equation or the Philip and de Vries coupled heat and water flow equations lead to a satisfactory representation of the soil moisture dynamic. However, It requires the characterization of soil hydraulic functions, the initialisation and the boundary conditions, which are expensive to obtain. The major problem to assess soil moisture for decision making or for representing its spatiotemporal evolution over complex landscape is therefore the lack of information to run the models. The aim of the presentation is to analyse how a soil moisture model can be implemented when only climatic data and basic soil information are available (soil texture, organic matter) and what would be the added of making a few soil moisture measurements. We considered the field scale, which is the key scale for decision making application (the field being the management unit for farming system) and landscape modelling (field size being comparable to the computation unit of distributed hydrological models). The presentation is limited to the bare soil case in order to limit the complexity of the system and the TEC model based on Philip and De Vries equations is used in this study. The following points are addressed: o the within field spatial variability. This spatial variability can be induced by the soil hydraulic properties and/or by the amount of infiltrated water induced by water rooting towards infiltration areas. We analyse how an effective parameterization of soil properties and boundary conditions can be used to simulate the field average moisture. o The model implementation with limited information. We propose strategies that can be implemented when information are limited to soil texture and

  12. [Measurement of antimicrobial consumption using DDD per 100 bed-days versus DDD per 100 discharges after the implementation of an antimicrobial stewardship program].

    Science.gov (United States)

    Collado, Roberto; Losa, Juan Emilio; Álvaro, Elena Alba; Toro, Piedad; Moreno, Leonor; Pérez, Montserrat

    2015-12-01

    Monitoring antimicrobial consumption in hospitals is a necessary measure. The indicators commonly employed do not clearly reflect the antibiotic selection pressure. The objective of this study is to evaluate two different methods that analyze antimicrobial consumption based on DDD, per stay and per discharge, before and after the implementation an antimicrobial stewardship program. Comparative pre-post study of antimicrobial consumption with the implementation of an antimicrobial stewardship program using DDD per 100 bed-days and DDD per 100 discharges as indicators. Hospital bed days remained stable and discharges increased slightly along the period of study Antibiotic consumption in DDD per 100 bed-days decreased by 2.5% versus 3.8% when expressed as DDD per 100 discharges. Antifungal consumption decreased by more than 50%. When average hospital stay decreases, reductions in the consumption of antimicrobials with an antimicrobial stewardship program system occur at the expense of reducing the number of patients receiving treatment, while increases occur due to longer durations of treatment.

  13. Employment in French young adult survivors of childhood leukemia: an LEA study (for Leucemies de l'Enfant et de l'Adolescent-childhood and adolescent leukemia).

    Science.gov (United States)

    Berbis, Julie; Reggio, Céline; Michel, Gérard; Chastagner, Pascal; Bertrand, Yves; Kanold, Justyna; Sirvent, Nicolas; Plantaz, Dominique; Baruchel, André; Tabone, Marie-Dominique; Garnier, Floriane; Lehucher-Michel, Marie-Pascale; Auquier, Pascal

    2016-12-01

    Our principal aim was to assess the occupational outcomes of French survivors of childhood leukemia, compared to national population. The secondary objective was to identify determinants linked with employment stability after childhood leukemia. All survivors aged 15 and over enrolled in the French LEA Cohort (Childhood and Adolescent Leukemia) were included. Occupational data were self-reported. The occupational distributions expected in the cohort for each age range were established based on the distribution in France as reference, and comparisons between observed and expected distributions were performed. Logistic regression model was used to explore determinants of stability of survivors' employment. The questionnaire was completed by 845 eligible survivors (response rate 87.8 %), with a mean age of 22.3 ± 5.4 years and a mean follow-up duration of 14.3 ± 6.3 years. Among the 361 survivors currently in the labor market, 36 (10.0 %) were seeking a job, which is significantly lower than expected (19.3 %) compared to French population. Conversely, among those currently employed, the number of survivors in unstable employment (43.9 %) was significantly higher than expected (33.5 %). Younger age and higher number of late effects were risk factors for unstable employment. While the employment rate of the young French adult population of childhood leukemia survivors seems rather positive, access to a steady job appears to be compromised for some survivors. A strategy to better identify particular subgroups of survivors at greatest risk for difficulties in their professional achievement will help ensure the development of specific intervention strategies and support procedures.

  14. Emigrare o restare in Germania? Tre differenti risposte di autrici ebree tedesche di seconda generazione (Barbara Honigmann, Lea Fleischmann, Esther Dischereit

    Directory of Open Access Journals (Sweden)

    Alessandro Costazza

    2014-04-01

    Full Text Available The purpose of this paper is to investigate, through the analysis of the writings of three German Jewish authors of second generation – Lea Fleischmann, Esther Dischereit and Barbara Honigmann – their different responses to the complex post-war situation of Jews in both West- and East-Germany. Despite the different origins and experiences of their parents under Nazism, all three make in their youth the painful experience of a Judaism lived mainly as absence, as silence about the past and as lack of Jewish tradition and religion. Trying to achieve their own identity, Fleischmann and Dischereit seek a possible integration in post-war West-Germany in the political commitment of the 70s, but must then recognize that anti-Semitism is still widespread in that country. This discovery compels Fleischmann to leave Germany and seek in Israel and eventually in the religion of her fathers a Jewish identity. Esther Dischereit decides on the contrary to perform in Germany her "exercises to be Jewish", assuming the role of critical conscience of German society. Different is the situation of Barbara Honigmann, born and raised in East-Germany, who reacts to the dominant materialism in that state with a need for spirituality that will take her to seek in religion – lived outside of Germany and so far from "negative symbiosis" between Jews and Germans, but also far from Israel - her own diasporic identity. Despite the three different outcomes resulting from the search for Jewish identity in post-war Germany, for all three authors writing plays a crucial function as memory and critical conscience and since this writing is a German one, it imposes eventually a tight and thorough confrontation with German culture.

  15. Implementing Measures of Teacher Effectiveness

    Science.gov (United States)

    Stecher, Brian; Garet, Mike; Holtzman, Deborah; Hamilton, Laura

    2012-01-01

    An initial look at work being done in a reform project sponsored by the Bill & Melinda Gates Foundation finds that evaluations of teacher performance aren't as unpopular with teachers who have experienced the new system as some would have us believe. Leaders acknowledge that the new approach to teacher evaluation takes more time than…

  16. Comparative Study of Microbial Activity and Chemical Properties of Soil by Implementing Anti-erosion Measure Vertical Mulching with Organic Residues

    Directory of Open Access Journals (Sweden)

    Gergana Slavova Kuncheva

    2015-01-01

    Full Text Available Water soil erosion is a phenomenon in which soil particles are separated transported and translocated by the action of rain water. Removal of topsoil by water flow leads to a decrease of humus in the soil, deterioration of soil structure, compaction, and reduction of microbial activity.Developed and tested have been number of methods and technologies for soil protection from the effects of water erosion. Such technology is vertical mulching, and straw or compost applied as mulching material.This work is a study of the changes that occur in some soil chemical properties and soil microbiological activity, as a result in the implementation of anti-erosion measure vertical mulching with different mulching materials for growing corn and wheat grain on carbonate chernozem, on sloping agricultural lands.

  17. Measuring the Success of E-Cargo Implementation at One of Indonesian Airlines using DeLone and McLean Model

    Science.gov (United States)

    Monika, Ruth; Lumban Gaol, Ford

    2017-06-01

    This research is aimed at measuring the success of e-cargo implementation in Indonesia. There are three analyzed districts: Tanjung Pandan (TJQ), Palembang (PLM), and Jakarta (CGK). The research uses information system’s success model proposed by Delone and McLean. The research will analyze the factors that measure the success of using DeLone & McLean model of success information systems. Data from 53 respondents were collected through a survey, then the author created a path with the Partial Least Squares (PLS) path analysis using the software SmartPLS (v.3.2.6). The results of this study proved that the information quality variable did not significantly affect use variable, the information quality variable had no significant effect on the user satisfaction variable and the service quality variable had no significant effect on the use variable, while the other variables were tested significant in measuring the success of the use of information systems with R-square value that has a moderate effect of user satisfaction variable by 0.577, the use variable by 0.396, and a net benefit variable by 0.615.

  18. Additional Risk Minimisation Measures for Medicinal Products in the European Union: A Review of the Implementation and Effectiveness of Measures in the United Kingdom by One Marketing Authorisation Holder.

    Science.gov (United States)

    Agyemang, Elaine; Bailey, Lorna; Talbot, John

    2017-01-01

    Additional risk minimisation measures (aRMMs) for medicinal products are necessary to address specific important safety issues which may not be practically achieved through routine risk management measures alone. The implementation and determination of effectiveness for aRMMs can be a challenge as it involves multiple stakeholders. It is therefore important to have concise objectives to avoid undue burden on patients, healthcare professionals and the healthcare system. The aim of this study was to examine how aRMMs are implemented and how effectiveness is assessed in the European Union (EU) using practical examples from Roche Products Limited in the United Kingdom (UK) (referred to as the 'Company'). Three centrally authorised products were selected from the Company's portfolio, each of which had aRMMs to address important safety concerns; specifically, teratogenicity, medication error and infections. The implementation of EU aRMMs, effectiveness checks and specific UK activities were analysed. Hard copy folders and electronic sites for Company aRMMs were used to assess process indicators. Periodic benefit-risk evaluation reports for specified time intervals and the Company safety database was used in checking safety outcomes for the selected products. For each product, the effectiveness of aRMMs was analysed based on specific process indicators and the subsequent safety outcomes. Literature searches were performed on scientific databases for the purposes of the broader study. The main process indicators in measuring effectiveness of Company aRMMs were distribution metrics for educational materials, assessment of awareness and clinical actions among healthcare professionals (HCPs). Case reports of pregnancy, medication errors and progressive multifocal leukoencephalopathy (PML) were the outcome indicators for Erivedge ® ▼, Kadcyla ® ▼ and MabThera ® (the latter specifically in autoimmune indications: rheumatoid arthritis, granulomatosis with polyangiitis and

  19. Community-based interventions to improve HPV vaccination coverage among 13- to 15-year-old females: measures implemented by local governments in Japan.

    Directory of Open Access Journals (Sweden)

    Hiroyuki Fujiwara

    Full Text Available The purpose of this study was to examine the effect of various community-based interventions in support of HPV vaccination implemented by cities and towns within Tochigi prefecture, Japan with a view to identifying useful indicators which might guide future interventions to improve HPV vaccination coverage in the prefecture. A postal questionnaire survey of all 27 local governments in Tochigi Prefecture was conducted in December 2010. All 27 responded, and 22 provided the exact numbers of the targeted and vaccinated populations of 13- to 15-year-old girls from April to December 2010. The local governments also answered questions on the type of interventions implemented including public subsidies, school-based programs, direct mail, free tickets and recalls. Local governments that conducted a school-based vaccination program reported 96.8% coverage for the 1(st dose, 96.2% for the 2(nd dose, and 91.2% for the 3(rd dose. Those that provided subsidies without school-based programs reported a wide range of vaccination rates: 45.7%-95.0% for the 1(st dose, 41.1%-93.7% for the 2(nd dose and 3.1%-90.1% for the 3(rd dose. Among this group, the combination of a free ticket, direct mail and recall was most effective, with 95.0% coverage for the 1(st dose, 93.7% for the 2(nd dose, and 90.1% for the 3(rd dose. The governments that did not offer a subsidy had the lowest vaccination coverage, with 0.8%-1.4% for the 1(st dose, 0.0%-0.8% for the 2(nd dose, and 0.1%-0.1% for the 3(rd dose. The results of this survey indicate that school-based vaccinations and public subsidies are the most effective method to improve HPV vaccination coverage; however, the combination of a free ticket, direct mail, and recalls with public subsidies are also important measures in increasing the vaccination rate. These data may afford important indicators for the successful implementation of future HPV vaccination programs.

  20. Measurement

    NARCIS (Netherlands)

    Boumans, M.; Durlauf, S.N.; Blume, L.E.

    2008-01-01

    Measurement theory takes measurement as the assignment of numbers to properties of an empirical system so that a homomorphism between the system and a numerical system is established. To avoid operationalism, two approaches can be distinguished. In the axiomatic approach it is asserted that if the

  1. Pilot Implementations

    DEFF Research Database (Denmark)

    Manikas, Maria Ie

    by conducting a literature review. The concept of pilot implementation, although commonly used in practice, is rather disregarded in research. In the literature, pilot implementations are mainly treated as secondary to the learning outcomes and are presented as merely a means to acquire knowledge about a given...... objective. The prevalent understanding is that pilot implementations are an ISD technique that extends prototyping from the lab and into test during real use. Another perception is that pilot implementations are a project multiple of co-existing enactments of the pilot implementation. From this perspective......This PhD dissertation engages in the study of pilot (system) implementation. In the field of information systems, pilot implementations are commissioned as a way to learn from real use of a pilot system with real data, by real users during an information systems development (ISD) project and before...

  2. ANESTESIA PARA AMPUTACIÓN SUPRACONDÍLEA EN PACIENTE CON SÍNDROME CORONARIO AGUDO / Anesthesia for supracondylar amputation in patient with acute coronary syndrome

    Directory of Open Access Journals (Sweden)

    Marilyn Ramírez Méndez

    2012-03-01

    Full Text Available Resumen La insuficiencia arterial periférica es una enfermedad que se asocia a factores de riesgo aterogénico reconocidos, y es más frecuente en personas con hiperlipidemia, diabetes mellitus y hábito de fumar. Se presenta el caso de una mujer de 67 años de edad, con antecedentes de hipertensión arterial, diabetes mellitus e infarto de miocardio antiguo, que ingresa por signos de inflamación aguda del miembro inferior derecho como consecuencia de una insuficiencia arterial periférica. A los 8 días del ingreso presentó un síndrome coronario agudo sin elevación del segmento ST, con fallo de bomba Killip II, y una vez compensada fue anunciada para amputación supracondílea de urgencia, debido a una gangrena isquémica. Se decidió utilizar anestesia espinal subaracnoidea selectiva del miembro inferior derecho, a cual se aplicó sin complicaciones y favoreció el adecuado desarrollo de la cirugía planificada. A las 72 horas la paciente fue egresada de la UCI, sin síntomas cardiovasculares y compensación metabólica. / Abstract Peripheral arterial insufficiency is a disease that is associated with known atherogenic risk factors, and is more common in people with hyperlipidemia, diabetes mellitus and smoking habit. A case of a 67-year-old woman with a history of hypertension, diabetes mellitus and old myocardial infarction is presented. She was admitted for signs of acute inflammation of the right leg due to peripheral arterial insufficiency. 8 days after admission she presented an acute coronary syndrome without ST segment elevation with pump failure (Killip class II, and once compensated she was scheduled for emergency supracondylar amputation due to ischemic gangrene. It was decided to use selective spinal subarachnoid from the right leg, which was applied without complications and favored the proper development of the planned surgery. At 72 hours, the patient was discharged from the ICU, with metabolic compensation and without

  3. Development of methods for evaluation of electricity saving and load levelling measures. Part 2: The planning and implementation of a power conservation campaign

    Energy Technology Data Exchange (ETDEWEB)

    Storm Soerensen, M.; Madsen, P.K. [NESA A/S, Research and Development Dept. (Denmark)

    1997-12-01

    In recent years many campaigns and projects have been carried out with the purpose of reducing the energy consumption. Simultaneously a lot of economic and structural changes are taking place in society in general; changes which also affect the size of the electricity consumption. Furthermore, there is a trend towards increased use of wind mills and decentral combined heating and power plants, which affects the electricity load of the local area. It is difficult to identify and separate the effect of each of these attitude-adjusting activities. The project `Development of methods for evaluation of the effect of electricity saving and load levelling measures` focuses on two different methods which, on different levels, can be used to determine the impact of different different activities on the electricity consumption. Both methods are based on mathematical statistics, and they consist of an analysis of historical data and a test campaign which will make it possible to test specific activities in a comparatively small scale. The historical part covers the years 1974 to 1994 and include such variables as: demography, economic factors, climatic conditions, periods of electricity saving campaigns, the start of billing according to time of day tariff etc. The wish to be able to measure the extent of these energy saving and load reducing initiatives resulted in a test campaign which was carried out under very restricted conditions starting in the fall of 1996. If the effect of the test campaign can be measured and as a consequence of this a method can be estimated, it will be possible to place models which can measure the effect of future campaigns. The primary object of the campaign is not the size of the electricity savings of the individual customer, but rather to obtain total savings for the entire group of customers. The test has been structured in a way which makes it possible to perform an analysis of the effect of the campaign by use of analysis of intervention

  4. Implementation of the Peak Scaling Method for Temperature Measurement in the Laser Heated Diamond Anvil Cell at ALS Beamline 12.2.2

    Science.gov (United States)

    Kunz, M.; MacDowell, A. A.; Yan, J.; Beavers, C.; Doran, A.; Williams, Q. C.

    2016-12-01

    The laser-heated diamond anvil cell (LHDAC) is an important tool in the quest to correlate seismologically derived density and velocity profiles of the Earth with mineralogical models. Precise and accurate measurement of pressure and temperature is crucial for the LHDAC to be useful. Measuring accurate temperatures of laser-heated samples is an ongoing problem. One of the more promising approaches is the `peak-scaling method' as proposed by Kavner and Panero [2004]. This method relies on imaging the entire hot spot, rather than only the peak region onto the grating of a spectrometer. The temperature derived from the entire hotspot is an `average' temperature of the full hot spot. Combined with a monochromatic intensity map of the hot spot and a single temperature spot on this map (normally the peak temperature), a complete temperature map of the LHDAC can be derived. The crux of the method is to determine an accurate peak temperature. Using MATLAB, we derived systematic dependences of the relationship between average temperature and peak temperature as a function of peak temperature, deviations from the grey body assumption [ɛ = f(T,λ)], size and shape of hotspot, as well as the size and position of the spectral window used for spectral fitting. We find these average-to-peak deviations to be significant (5 - 25 %) and hard to control. To avoid biases introduced into the temperature map by erroneous assumptions on the peak temperature, we implemented on ALS beamline 12.2.2 an iterative way to fit a correct peak temperature based on the measured average temperature and measured monochromatic (700 nm) intensity map of the hot spot. The method calculates an average temperature by inverting the Planck equation on the intensities extracted from the monochromatic hotspot image and compares this value to the value obtained by fitting the Wien approximation to the averaged spectrum of the entire hotspot. The peak temperature is adjusted until the difference between

  5. Energy. Policy and Implementation

    International Nuclear Information System (INIS)

    Stroop, A.

    2006-01-01

    Why does the government have an energy policy? What form does it take? Who is involved in implementing that policy? These and similar questions are answered in the latest Energy Report. The Dutch Ministry of Economic Affairs (EZ) argues that the objectives are feasible as long as the energy policies are matched by suitable implementation measures [nl

  6. Pilot implementation

    DEFF Research Database (Denmark)

    Hertzum, Morten; Bansler, Jørgen P.; Havn, Erling C.

    2012-01-01

    A recurrent problem in information-systems development (ISD) is that many design shortcomings are not detected during development, but first after the system has been delivered and implemented in its intended environment. Pilot implementations appear to promise a way to extend prototyping from...... the laboratory to the field, thereby allowing users to experience a system design under realistic conditions and developers to get feedback from realistic use while the design is still malleable. We characterize pilot implementation, contrast it with prototyping, propose a iveelement model of pilot...... implementation and provide three empirical illustrations of our model. We conclude that pilot implementation has much merit as an ISD technique when system performance is contingent on context. But we also warn developers that, despite their seductive conceptual simplicity, pilot implementations can be difficult...

  7. A Policy Analysis on the Proactive Prevention of Chronic Disease: Learnings from the Initial Implementation of Integrated Measurement for Early Detection (MIDO

    Directory of Open Access Journals (Sweden)

    Roberto Tapia-Conyer

    2017-06-01

    Full Text Available Mexico, like many low- and middle-income countries (LMICs, faces an epidemic of chronic non-communicable diseases (NCDs, specifically diabetes, hypertension, obesity, and lipid disorders. Many people with these NCDs may not be aware that they have a disease, pointing to the need for broader screening programs. The traditional prevention policy in Mexico was based on screening with a paper-based risk factor questionnaire. However, this was used to screen patients already seeking healthcare services at facilities, and screening goals were set as a function of the number of questionnaires applied, not number of individuals screened. Due to this, Fundación Carlos Slim developed Medición Integrada para la Detección Oportuna (MIDOTM, or Integrated Measurement for Early Detection, an NCD screening and proactive prevention policy. This document is a policy analysis based on early learnings from the initial implementation of MIDO in eight primary healthcare centers in two central Mexican states. MIDO was found to expand screening programs beyond clinic walls, systematize community screening strategies, emphasize the detection of pre-disease phases, incorporate lifestyle counseling, and propose screening goals based on population targets. In collaboration with the Mexican Ministry of Health, MIDO has successfully screened over 500 000 individuals—about 40% of whom would not have been screened under previous policies. Of these more than 500 000 screened individuals, 13.4% had pre-diabetes (fasting glucose between 100 and 125 mg/dL, and 5.8% had undiagnosed diabetes (defined as fasting glucose above 126 mg/dL or random glucose above 200 mg/dL. However, there is still room for improvement in linking positive results from screening with disease confirmation and with patient incorporation into disease management. The experience of implementing MIDO in Mexico suggests that primary and secondary prevention programs in other parts of the world should

  8. Changes in perceptions and motivators that influence the implementation of on-farm Salmonella control measures by pig farmers in England

    NARCIS (Netherlands)

    Marier, Elizabeth; Piers Smith, Richard; Ellis-Iversen, Johanne; Watson, Eamon; Armstrong, Derek; Hogeveen, Henk; Cook, Alasdair J.C.

    2016-01-01

    This study presents British farmers’ perception of, and barriers to, implementing Salmonella control on pig farms. Four farms that had implemented interventions and their 33 close contacts (known to the intervention farmers) took part in interviews before (phase 1) and after (phase 2)

  9. Lea County Current Area Landmark

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  10. Varssavis Itaaliat avastamas / Lea Arme

    Index Scriptorium Estoniae

    Arme, Lea

    2000-01-01

    Varssavis toimunud Itaalia ja Poola koostööle pühendatud suurüritusest "Italia & Polska Crescendo". Programmist. Näitusehallis olid väljas Itaalia mööbli-, naha-, masina- ja toiduainetetööstuse tooted, valgustid, kosmeetika, käsitööesemed, moedisainer Ken Scott'i looming jm. Kommentaar Jana Vaarikult, Itaalia Väliskaubanduse Instituudi esindajalt Eestis

  11. Lea County 2010 Census Roads

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  12. Lea County 2010 Census Edges

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  13. Lea County 2010 Census Tracts

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  14. Linna luksuslik liider / Lea Veelma

    Index Scriptorium Estoniae

    Veelma, Lea, 1947-2007

    2006-01-01

    Tallinna vanalinnas asuv Schlössle Hotell arvati ametlikult ülemaailmse luksushotellide keti The Leading Hotels of the World (LHW) liikmeks. Sündmuse puhul viibis Tallinnas LHW asepresident Claudia Roth

  15. Collaborative Lea(r)ning

    DEFF Research Database (Denmark)

    Nielsen, Jacob S.

    The inter-organisational collaboration perspective is not new. Phoenician merchants have used this perspective while setting up joint ventures to limit their risks in overseas trading. What is new are the ways in which efficiency alliances are interacting and changing the terms of competition, th...... as more floating. Companies in network have to understand that the success of every single company depends on the performance of every single partner in the network. The actors in the network must construct a mutual win-win situation for everybody. One of the first steps to accomplish...... systems to work together closely. Although only limited research has been done in this area it is clear that creating a joint improvement and learning culture between organisations is not easy. One of the first major step to explore this field was started in 2001 when a three year EU-funded project...

  16. Lea County 2010 Census Blocks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  17. Lea County Current Point Landmarks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census...

  18. Pilot Implementation of a Field Study Design to Evaluate the Impact of Source Control Measures on Indoor Air Quality in High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    Widder, Sarah H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chamness, Michele A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Maddalena, Randy L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Destaillats, Hugo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Russell, M. L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-10-01

    -emitting and “conventional” materials as installed in newly constructed residential homes using both (1) highly controlled, short-term active samples to precisely characterize the building-related chemical emissions and building contents and (2) a week-long passive sample designed to capture the impact of occupant behavior and related activities on measured IAQ contaminant levels indoors. The combination of detailed short-term measurements with the home under controlled/consistent conditions during pre- and post-occupancy and the week-long passive sampling data provide the opportunity to begin to separate the different emission sources and help isolate and quantify variability in the monitored homes. Between April and August 2014, the research team performed pre-occupancy and post-occupancy sampling in one conventional home and two homes built with low-emitting materials that were generally consistent with EPA’s Indoor airPLUS guidelines. However, for a number of reasons, the full experimental plan was not implemented. The project was intended to continue for up to three years to asses long-term changes in IAQ but the project was limited to one calendar year. As a result, several of the primary research questions related to seasonal impacts and the long-term trends in IAQ could not be addressed. In addition, there were several unexpected issues related to recruiting, availability of home types, and difficulty coordinating with builders/realtors/homeowners. Several field monitoring issues also came up that provide “lessons learned” that led to improvements to the original monitoring plan. The project produced a good experimental plan that is expected to be be useful for future efforts collecting data to support answering these same or similar research questions.

  19. Exploring Attitudes and Beliefs towards Implementing Cattle Disease Prevention and Control Measures: A Qualitative Study with Dairy Farmers in Great Britain

    Directory of Open Access Journals (Sweden)

    Marnie L. Brennan

    2016-10-01

    Full Text Available Disease prevention and control practices are frequently highlighted as important to ensure the health and welfare of farmed animals, although little is known as to why not many practices are carried out. The aim of this study was to identify the motivators and barriers of dairy cattle farmers towards the use of biosecurity measures on dairy farms using a health psychology approach. Twenty-five farmers on 24 farms in Great Britain (GB were interviewed using the Theory of Planned Behaviour framework. Results indicated that farmers perceived they had the ability to control what happened on their farms in terms of preventing and controlling disease, and described benefits from being proactive and vigilant. However, barriers were cited in relation to testing inaccuracies, effectiveness and time-efficiency of practices, and disease transmission route (e.g., airborne transmission. Farmers reported they were positively influenced by veterinarians and negatively influenced by the government (Department for Environment Food & Rural Affairs (DEFRA and the general public. Decisions to implement practices were influenced by the perceived severity of the disease in question, if disease was diagnosed on the farm already, or was occurring on other farms. Farmers described undertaking a form of personal risk assessment when deciding if practices were worth doing, which did not always involve building in disease specific factors or opinions from veterinarians or other advisors. These results indicate that further guidance about the intricacies of control and prevention principles in relation to specific animal diseases may be required, with an obvious role for veterinarians. There appears to be an opportunity for farm advisors and herd health professionals to further understand farmer beliefs behind certain attitudes and target communication and advice accordingly to further enhance dairy cattle health and welfare.

  20. Measuring $\

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Jessica Sarah [Univ. of Cambridge (United Kingdom)

    2011-01-01

    The MINOS Experiment consists of two steel-scintillator calorimeters, sampling the long baseline NuMI muon neutrino beam. It was designed to make a precise measurement of the ‘atmospheric’ neutrino mixing parameters, Δm2 atm. and sin2 (2 atm.). The Near Detector measures the initial spectrum of the neutrino beam 1km from the production target, and the Far Detector, at a distance of 735 km, measures the impact of oscillations in the neutrino energy spectrum. Work performed to validate the quality of the data collected by the Near Detector is presented as part of this thesis. This thesis primarily details the results of a vμ disappearance analysis, and presents a new sophisticated fitting software framework, which employs a maximum likelihood method to extract the best fit oscillation parameters. The software is entirely decoupled from the extrapolation procedure between the detectors, and is capable of fitting multiple event samples (defined by the selections applied) in parallel, and any combination of energy dependent and independent sources of systematic error. Two techniques to improve the sensitivity of the oscillation measurement were also developed. The inclusion of information on the energy resolution of the neutrino events results in a significant improvement in the allowed region for the oscillation parameters. The degree to which sin2 (2θ )= 1.0 could be disfavoured with the exposure of the current dataset if the true mixing angle was non-maximal, was also investigated, with an improved neutrino energy reconstruction for very low energy events. The best fit oscillation parameters, obtained by the fitting software and incorporating resolution information were: | Δm2| = 2.32+0.12 -0.08×10-3 eV2 and sin2 (2θ ) > 0.90(90% C.L.). The analysis provides the current world best measurement of the atmospheric neutrino mass

  1. [Transfer and Implementation of Innovative Awareness and Education Measures, e-Mental Health and Care Models in psychenet - Hamburg Network for Mental Health].

    Science.gov (United States)

    Lambert, Martin; Härter, Martin; Brandes, Andreas; Hillebrandt, Bernd; Schlüter, Catarina; Quante, Susanne

    2015-07-01

    The Hamburg Network for Mental Health belongs to the healthcare regions in Germany, funded by the Federal Ministry of Education and Research from 2011 to 2015. More than 330 partners from research, health care, health industry and government are promoting innovative health care models and products to improve mental health care in Hamburg. The main objectives comprise the sustained implementation of the Network itself and of successful health care models and products. The article describes current and future implementation possibilities and the present state of the implementation process. © Georg Thieme Verlag KG Stuttgart · New York.

  2. Treaty implementation

    International Nuclear Information System (INIS)

    Dunn, L.A.

    1990-01-01

    This paper touches on three aspects of the relationship between intelligence and treaty implementation, a two-way association. First the author discusses the role of intelligence as a basis for compliance monitoring and treaty verification. Second the authors discusses payoffs of intelligence gathering and the intelligence process of treaty implementation, in particular on-site inspection. Third, the author goes in another direction and discusses some of the tensions between the intelligence gathering and treaty-implementation processes, especially with regard to extensive use of on-site inspection, such as we are likely to see in monitoring compliance of future arms control treaties

  3. eLearning to facilitate the education and implementation of the Chelsea Critical Care Physical Assessment: a novel measure of function in critical illness.

    Science.gov (United States)

    Corner, Evelyn J; Handy, Jonathan M; Brett, Stephen J

    2016-04-11

    To evaluate the efficacy of eLearning in the widespread standardised teaching, distribution and implementation of the Chelsea Critical Care Physical Assessment (CPAx) tool-a validated tool to assess physical function in critically ill patients. Prospective educational study. An eLearning module was developed through a conceptual framework, using the four-stage technique for skills teaching to teach clinicians how to use the CPAx. Example and test video case studies of CPAx assessments were embedded within the module. The CPAx scores for the test case studies and demographic data were recorded in a secure area of the website. Data were analysed for inter-rater reliability using intraclass correlation coefficients (ICCs) to see if an eLearning educational package facilitated consistent use of the tool. A utility and content validity questionnaire was distributed after 1 year to eLearning module registrants (n=971). This was to evaluate uptake of the CPAx in clinical practice and content validity of the CPAx from the perspective of clinical users. The module was distributed for use via professional forums (n=2) and direct contacts (n=95). Critical care clinicians. ICC of the test case studies. Between July and October 2014, 421 candidates from 15 countries registered for the eLearning module. The ICC for case one was 0.996 (95% CI 0.990 to 0.999; n=207). The ICC for case two was 0.988 (0.996 to 1.000; n=184). The CPAx has a strong total scale content validity index (s-CVI) of 0.94 and is well used. eLearning is a useful and reliable way of teaching psychomotor skills, such as the CPAx. The CPAx is a well-used measure with high content validity rated by clinicians. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  4. Implementation of the Welfare Quality broiler assessment protocol – final report : overview of outcome-based measurement of broiler welfare and a general discussion on the Welfare Quality broiler assessment protocol

    NARCIS (Netherlands)

    Jong, de I.C.; Gunnink, H.; Hindle, V.A.

    2015-01-01

    In the current report, two topics related to our study on the implementation of the Welfare Quality® broiler assessment protocol are discussed. First, animal-based measures for broiler welfare, currently included in the Welfare Quality® broiler assessment protocol, are discussed with respect to

  5. Revisión sistemática de la evidencia actual de la aplicación de ejercicios excéntricos en la tendinopatía crónica aquílea

    OpenAIRE

    Inda Iraceburu, Jaione

    2013-01-01

    Introducción y antecedentes: La tendinopatía crónica Aquílea se determina por la aparición de dolor, inflamación y pérdida de la función del tendón de Aquíles. Es una patología desarrollada por uso excesivo del tendón siendo frecuente en los deportes que implican carrera y salto. Objetivos y/o hipótesis a alcanzar: Observar la evidencia científica actual de los ejercicios excéntricos como tratamiento de dicha patología, analizando los cambios fisiológicos que se dan intentan...

  6. Estudio del tratamiento de las fracturas supracondíleas de húmero en la infancia en el Hospital Universitario Miguel Servet de Zaragoza entre 1998 y 2008

    OpenAIRE

    Gómez Palacio, Victoria Eugenia; Gil Albarova, Jorge; Herrera Rodríguez, Antonio

    2014-01-01

    INTRODUCCIÓN O MOTIVACIÓN DEL TEMA: Las fracturas supracondíleas de húmero en la infancia es un tema de gran interés, presente en libros de traumatología infantil, en las revistas científicas relacionadas, en cursos y congresos. Este interés se centra, por la gran incidencia de esta patología, presente en el día a día del traumatólogo. Con las múltiples controversias que se pueden encontrar. Además es una patología a la que tengo que hacer frente en el día a día de mi actividad profesional en...

  7. Interim measure conceptual design for remediation at the former CCC/USDA grain storage facility at Centralia, Kansas : pilot test and remedy implementation.

    Energy Technology Data Exchange (ETDEWEB)

    LaFreniere, L. M.; Environmental Science Division

    2007-11-09

    This document presents an Interim Measure Work Plan/Design for the short-term, field-scale pilot testing and subsequent implementation of a non-emergency Interim Measure (IM) at the site of the former grain storage facility operated by the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) in Centralia, Kansas. The IM is recommended to mitigate both (1) localized carbon tetrachloride contamination in the vadose zone soils beneath the former facility and (2) present (and potentially future) carbon tetrachloride contamination identified in the shallow groundwater beneath and in the immediate vicinity of the former CCC/USDA facility. Investigations conducted on behalf of the CCC/USDA by Argonne National Laboratory have demonstrated that groundwater at the Centralia site is contaminated with carbon tetrachloride at levels that exceed the Kansas Tier 2 Risk-Based Screening Level (RBSL) and the U.S. Environmental Protection Agency's maximum contaminant level of 5.0 {micro}g/L for this compound. Groundwater sampling and analyses conducted by Argonne under a monitoring program approved by the Kansas Department of Health and Environment (KDHE) indicated that the carbon tetrachloride levels at several locations in the groundwater plume have increased since twice yearly monitoring of the site began in September 2005. The identified groundwater contamination currently poses no unacceptable health risks, in view of the absence of potential human receptors in the vicinity of the former CCC/USDA facility. Carbon tetrachloride contamination has also been identified at Centralia in subsurface soils at concentrations on the order of the Kansas Tier 2 RBSL of 200 {micro}g/kg in soil for the soil-to-groundwater protection pathway. Soils contaminated at this level might pose some risk as a potential source of carbon tetrachloride contamination to groundwater. To mitigate the existing contaminant levels and decrease the potential future concentrations of

  8. Conceptualizing Student Affect for Science and Technology at the Middle School Level: Development and Implementation of a Measure of Affect in Science and Technology (MAST)

    Science.gov (United States)

    Romine, William L.; Sadler, Troy D.; Wulff, Eric P.

    2017-01-01

    We describe the development of the Measure of Affect in Science and Technology (MAST), and study its usefulness for measuring science affect in middle school students via both classical and Rasch measurement perspectives. We then proceed to utilize the measurement structure of the MAST to understand how middle school students at varying levels of…

  9. EDMS implementation challenge.

    Science.gov (United States)

    De La Torre, Marta

    2002-08-01

    The challenges faced by facilities wishing to implement an electronic medical record system are complex and overwhelming. Issues such as customer acceptance, basic computer skills, and a thorough understanding of how the new system will impact work processes must be considered and acted upon. Acceptance and active support are necessary from Senior Administration and key departments to enable this project to achieve measurable success. This article details one hospital's "journey" through design and successful implementation of an electronic medical record system.

  10. Force Structure: Performance Measures Needed to Better Implement the Recommendations of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2016-05-01

    implementation actions. The teams present their proposed actions to the one- star general officers within the Total Force Continuum office. According...additional information. Connect with GAO on Facebook, Flickr, Twitter, and YouTube . Subscribe to our RSS Feeds or E-mail Updates. Listen to our

  11. Implementing the Customer Contact Center: An Opportunity to Create a Valid Measurement System for Assessing and Improving a Library's Telephone Services

    Science.gov (United States)

    Murphy, Sarah Anne; Cerqua, Judith

    2012-01-01

    A customer contact center offers academic libraries the ability to consistently improve their telephone, e-mail, and IM services. This paper discusses the establishment of a contact center and the benefits of implementing the contact center model at this institution. It then introduces a practical methodology for developing a valid measurement…

  12. MEASURING PERFORMANCE – IDINSPENSABLE ELEMENT IN ASSURING TRANSPARENCY IN DECISION MAKING PROCESS OF INVESTMENT PROJECTS IMPLEMENTATION (the example of municipality Chisinau

    Directory of Open Access Journals (Sweden)

    Victor PAVALEAN

    2016-06-01

    Full Text Available Performance evaluation proved to be an indispensable component, both, for ensuring the performance criteria budget locally, but also, for ensuring the legality of the investment projects implementation, focusing on quality of the works for which public financial sources were invested,in order to respond effectively to the needs of urban comfort.

  13. Elusive Implementation

    DEFF Research Database (Denmark)

    Heering Holt, Ditte; Rod, Morten Hulvej; Waldorff, Susanne Boch

    2018-01-01

    in health. However, despite growing support for intersectoral policymaking, implementation remains a challenge. Critics argue that public health has remained naïve about the policy process and a better understanding is needed. Based on ethnographic data, this paper conducts an in-depth analysis of a local......: On the basis of an explorative study among ten Danish municipalities, we conducted an ethnographic study of the development of a municipal-wide implementation strategy for the intersectoral health policy of a medium-sized municipality. The main data sources consist of ethnographic field notes from participant...

  14. A catalogue of measures for the implementation of an examplary climate-friendly waste disposal in the State of Berlin. Final Report; Massnahmenplan zur Umsetzung einer vorbildhaften klimafreundlichen Abfallentsorgung im Land Berlin. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Regine; Fehrenbach, Horst

    2012-09-15

    The waste management of the State of Berlin (Federal Republic of Germany) shall be re-aligned and optimized in particular under the aspects of resource protection and climate change in order to achieve a more relevant reduction of harmful greenhouse gases (carbon dioxide, methane, nitrous oxide) up to the year 2020. In order to evaluate these targets and in order to control the waste streams, an annual material balance, carbon footprint and environmental impact shall be created for non-hazardous wastes. Under this aspect, the authors of the contribution under consideration analyze the waste management situation in the State of Berlin with regard to the waste streams and the associated relevant greenhouse gas emissions. From this, optimization potentials are derived and optimized with respect to their reduction effects. A catalogue of measures for a possible implementation of identified measures is created. A user-friendly Excel tool was developed for the annual implementation of identified measures.

  15. Implementation Politics

    DEFF Research Database (Denmark)

    Hegland, Troels Jacob; Raakjær, Jesper

    2008-01-01

    level are supplemented or even replaced by national priorities. The chapter concludes that in order to capture the domestic politics associated with CFP implementation in Denmark, it is important to understand the policy process as a synergistic interaction between dominant interests, policy alliances...

  16. Validity and reliability of the "German Utilization Questionnaire-Dissemination and Use of Research" to measure attitude, availability, and support toward implementation of research in nursing practice.

    Science.gov (United States)

    Haslinger-Baumann, Elisabeth; Lang, Gert; Müller, Gerhard

    2014-01-01

    In nursing practice, research results have to undergo a systematic process of transformation. Currently in Austria, there is no empirical data available concerning the actual implementation of research results. An English validated questionnaire was translated into German and tested for validity and reliability. A survey of 178 registered nurses (n = 178) was conducted in a multicenter, quantitative, cross-sectional study in Austria in 2011. Cronbach's alpha values (.82-.92) were calculated for 4 variables ("use," "attitude," "availability," "support") after the reduction of 7 irrelevant items. Exploratory factor analysis was calculated with Kaiser-Meyer-Olkin (KMO) ranging from .78 to .92; the total variance ranged from 46% to 56%. A validated German questionnaire concerning the implementation of research results is now available for the nursing practice.

  17. Final Report. SFAA No. DEFC02-98CH10961. Technical assistance for joint implementation and other supporting mechanisms and measures for greenhouse gas emissions mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Knight, Denise

    2001-10-15

    IIEC, a division of CERF, has developed an extensive base of experience implementing activities that support climate action by developing USIJI projects in transitional countries within Asia, Latin America, Central and Eastern Europe, and southern Africa. IIEC has been able to provide a range of technical and policy assistance to governments and industry in support of sustainable energy use. IIEC continues to work in key countries with local partners to develop and implement energy efficiency policies and standards, develop site-specific projects, and assist governing bodies to establish national priorities and evaluation criteria for approving GHG-mitigation projects. As part of this project, IIEC focused on promoting a series of activities in Thailand and South Africa in order to identify GHG mitigation projects and work within the national approval process of those countries. The sections of this report outline the activities conducted in each country in order to achieve that goal.

  18. Implementing cleaner production in an automotive company: an application of material input per unit of service tool to measure environmental and economic advantages

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso de Oliveira Neto

    2017-09-01

    Full Text Available Environmental impact reduction has been a growing concern of the automotive industry. One of the main challenges is to implement Cleaner Production as a tool to reduce environmental impacts and provide financial profits. The purpose of this article was to evaluate the environmental impact and economic gains by implementing Cleaner Production, using an unexplored approach, in a company of the automotive sector. The research approach used was a case study, carried out by observation and semi-structured surveys. The production process chosen was updated, so technologies were changed to reduce biotic and abiotic disposal. For the analysis of environmental impacts, the ‘Material Input Per Unit of Service’ tool (MIPS was used, in which data was used to calculate: annual net profit; return on investment (% and return on investment for a period. The results showed that Cleaner Production implementation focusing on changing technology in the production process caused a 75% reduction in environmental impact, and a 62.7% decrease in production costs. Although of this study considers only one case to test the procedure applicability, it can be easily repeated in other more complex systems, by merely making the necessary adjustments due to the complexity of the processes involved.

  19. Practical Aspects of Kalman Filtering Implementation

    Science.gov (United States)

    1976-03-01

    proven by many flight tesis on several applications at Autonetics. 1EFERENCES I i l.eond: s, C. 1’., (;ultance and Control of Aerospace Vehicles, McG...et la conduite des visualisations et des commandes du syst~me. La puissance de calcul et la *n~moire restant disponible ., 6tant insuffisantes pour lea

  20. Implementing Pseudonymity

    Directory of Open Access Journals (Sweden)

    Miranda Mowbray

    2006-03-01

    Full Text Available I will give an overview of some technologies that enable pseudonymity - allowing individuals to reveal or prove information about themselves to others without revealing their full identity. I will describe some functionalities relating to pseudonymity that can be implemented, and some that cannot. My intention is to present enough of the mathematics that underlies technology for pseudonymity to show that it is indeed possible to implement some functionalities that at first glance may appear impossible. In particular, I will show that several of the intended functions of the UK national ID could be provided in a pseudonymous fashion, allowing greater privacy. I will also outline some technology developed at HP Labs which ensures that users’ personal data is released only to software that has been checked to conform to their preferred privacy policies.

  1. Fusion Implementation

    International Nuclear Information System (INIS)

    Schmidt, J.A.

    2002-01-01

    If a fusion DEMO reactor can be brought into operation during the first half of this century, fusion power production can have a significant impact on carbon dioxide production during the latter half of the century. An assessment of fusion implementation scenarios shows that the resource demands and waste production associated with these scenarios are manageable factors. If fusion is implemented during the latter half of this century it will be one element of a portfolio of (hopefully) carbon dioxide limiting sources of electrical power. It is time to assess the regional implications of fusion power implementation. An important attribute of fusion power is the wide range of possible regions of the country, or countries in the world, where power plants can be located. Unlike most renewable energy options, fusion energy will function within a local distribution system and not require costly, and difficult, long distance transmission systems. For example, the East Coast of the United States is a prime candidate for fusion power deployment by virtue of its distance from renewable energy sources. As fossil fuels become less and less available as an energy option, the transmission of energy across bodies of water will become very expensive. On a global scale, fusion power will be particularly attractive for regions separated from sources of renewable energy by oceans

  2. Implementation of the Preventive Radiation Protection Act; here: Regulation governing ambient radioactivity monitoring subject to the Preventive Radiation Protection Act. Pt. 1. Measuring programme for specified normal operation monitoring (routine measuring programme). BMU circular letter dated 28.07.94 -RS II 6 - 15 603/3

    International Nuclear Information System (INIS)

    1994-01-01

    The regulation addresses the competent Federal and Land authorities responsible for implementation of the Preventive Radiation Protection Act, and the competent highest Land authorities. The regulation defines the scope of obligatory measurement of ambient radioactivity during normal operation of installations and determines the measuring techniques to be applied for this purpose. The programme determines compulsory instructions to be observed in the performance of the routine measuring programme by the competent Federal and Land authorities and thus ensures nationwide application of standard procedures

  3. Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

    2017-10-05

    This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

  4. EX6AFS: A data acquisition system for high-speed dispersive EXAFS measurements implemented using object-oriented programming techniques

    International Nuclear Information System (INIS)

    Jennings, G.; Lee, P.L.

    1995-01-01

    In this paper we describe the design and implementation of a computerized data-acquisition system for high-speed energy-dispersive EXAFS experiments on the X6A beamline at the National Synchrotron Light Source. The acquisition system drives the stepper motors used to move the components of the experimental setup and controls the readout of the EXAFS spectra. The system runs on a Macintosh IIfx computer and is written entirely in the object-oriented language C++. Large segments of the system are implemented by means of commercial class libraries, specifically the MacApp application framework from Apple, the Rogue Wave class library, and the Hierarchical Data Format datafile format library from the National Center for Supercomputing Applications. This reduces the amount of code that must be written and enhances reliability. The system makes use of several advanced features of C++: Multiple inheritance allows the code to be decomposed into independent software components and the use of exception handling allows the system to be much more reliable in the event of unexpected errors. Object-oriented techniques allow the program to be extended easily as new requirements develop. All sections of the program related to a particular concept are located in a small set of source files. The program will also be used as a prototype for future software development plans for the Basic Energy Science Synchrotron Radiation Center Collaborative Access Team beamlines being designed and built at the Advanced Photon Source

  5. Development and Evaluation of an Implementation Strategy for Collecting Data in a National Registry and the Use of Patient-Reported Outcome Measures in Physical Therapist Practices: Quality Improvement Study.

    Science.gov (United States)

    Meerhoff, Guus A; van Dulmen, Simone A; Maas, Marjo J M; Heijblom, Karin; Nijhuis-van der Sanden, Maria W G; Van der Wees, Philip J

    2017-08-01

    In 2013, the Royal Dutch Society for Physical Therapy launched the program "Quality in Motion." This program aims to collect data from electronic health record systems in a registry that is fed back to physical therapists, facilitating quality improvement. The purpose of this study was to describe the development of an implementation strategy for the program and to evaluate the feasibility of building a registry and implementing patient-reported outcome measures (PROMs) in physical therapist practices. A stepwise approach using mixed methods was established in 3 consecutive pilots with 355 physical therapists from 66 practices. Interim results were evaluated using quantitative data from a self-assessment questionnaire and the registry and qualitative data from 21 semistructured interviews with physical therapists. Descriptive statistics and McNemar's symmetry chi-squared test were used to summarize the feasibility of implementing PROMs. PROMs were selected for the 5 most prevalent musculoskeletal conditions in Dutch physical therapist practices. A core component of the implementation strategy was the introduction of knowledge brokers to support physical therapists in establishing the routine use of PROMs in clinical practice and to assist in executing peer assessment workshops. In February 2013, 30.3% of the physical therapist practices delivered 4.4 completed treatment episodes per physical therapist to the registry; this increased to 92.4% in November 2014, delivering 54.1 completed patient episodes per physical therapist. Pre- and posttreatment PROM use increased from 12.2% to 39.5%. It is unclear if the participating physical therapists reflect a representative sample of Dutch therapists. Building a registry and implementing PROMs in physical therapist practices are feasible. The routine use of PROMs needs to increase to ensure valid feedback of outcomes. Using knowledge brokers is promising for implementing the program via peer assessment workshops. © 2017

  6. Development, implementation, and characterization of a standalone embedded viscosity measurement system based on the impedance spectroscopy of a vibrating wire sensor

    Science.gov (United States)

    Santos, José; Janeiro, Fernando M.; Ramos, Pedro M.

    2015-10-01

    This paper presents an embedded liquid viscosity measurement system based on a vibrating wire sensor. Although multiple viscometers based on different working principles are commercially available, there is still a market demand for a dedicated measurement system capable of performing accurate, fast measurements and requiring little or no operator training for simple systems and solution monitoring. The developed embedded system is based on a vibrating wire sensor that works by measuring the impedance response of the sensor, which depends on the viscosity and density of the liquid in which the sensor is immersed. The core of the embedded system is a digital signal processor (DSP) which controls the waveform generation and acquisitions for the measurement of the impedance frequency response. The DSP also processes the acquired waveforms and estimates the liquid viscosity. The user can interact with the measurement system through a keypad and an LCD or through a computer with a USB connection for data logging and processing. The presented system is tested on a set of viscosity standards and the estimated values are compared with the standard manufacturer specified viscosity values. A stability study of the measurement system is also performed.

  7. Development, implementation, and characterization of a standalone embedded viscosity measurement system based on the impedance spectroscopy of a vibrating wire sensor

    International Nuclear Information System (INIS)

    Santos, José; Ramos, Pedro M; Janeiro, Fernando M

    2015-01-01

    This paper presents an embedded liquid viscosity measurement system based on a vibrating wire sensor. Although multiple viscometers based on different working principles are commercially available, there is still a market demand for a dedicated measurement system capable of performing accurate, fast measurements and requiring little or no operator training for simple systems and solution monitoring. The developed embedded system is based on a vibrating wire sensor that works by measuring the impedance response of the sensor, which depends on the viscosity and density of the liquid in which the sensor is immersed. The core of the embedded system is a digital signal processor (DSP) which controls the waveform generation and acquisitions for the measurement of the impedance frequency response. The DSP also processes the acquired waveforms and estimates the liquid viscosity. The user can interact with the measurement system through a keypad and an LCD or through a computer with a USB connection for data logging and processing. The presented system is tested on a set of viscosity standards and the estimated values are compared with the standard manufacturer specified viscosity values. A stability study of the measurement system is also performed. (paper)

  8. Guide for the implementation in external radiation therapy of quality insurance by in vivo measurements by thermoluminescent dosimeters and semi-conductors. S.F.P.M. report nr 18-2000

    International Nuclear Information System (INIS)

    Goyet, Dominique; Dusserre, Andree; Marcie, Serge; Telenczak, Pascale; Waultier, Serge; Costa, Andre; Lisbona, Albert; Noel, Alain

    2000-01-01

    This report aims at gathering all necessary information for the implementation of treatment quality insurance procedures by in vivo measurements in the case of external radiation therapy. It presents the different techniques, describes characteristics of TL meters, electro-meters, TL dosimeters, and semi-conductors currently available on the French market, and indicates all accessories required by these techniques. It also recalls principles of in vivo measurements, as well as calibration procedures. The last part proposes a description of acceptance and quality control procedures for these equipment

  9. The intricate implementation of performance measurement systems, exploring developments in professional-service organizations in the Dutch non-profit sector

    NARCIS (Netherlands)

    Teelken, J.C.

    2008-01-01

    Institutional and organizational theory supports the argument that current features of performance measurement systems (PMS) in public organizations are generally unsuitable for the actual nature of these professional organizations. Longitudinal and cross-sectional studies in the health care and

  10. Cross-sectional study on factors hampering implementation of measles pre- and postexposure measures in Dutch hospitals during the 2013-2014 measles outbreak.

    NARCIS (Netherlands)

    Fievez, L C R; Wong, A; Ruijs, W L M; Meerstadt-Rombach, F S; Timen, A

    2017-01-01

    This study examined adherence to national recommendations on measles pre- and postexposure measures, including immunization of health care workers (HCWs) in Dutch hospitals, during a national outbreak of measles in The Netherlands. This study also investigated which hospital characteristics and

  11. Implementation of a new data acquisition and exclusive measurement of the reaction vector pp → ppπ+π- at the time of flight spectrometer COSY-TOF

    International Nuclear Information System (INIS)

    Erhardt, Arthur

    2009-01-01

    The two-pion production pp ppπ + π - was measured exclusively at T p =793 MeV using the short version of the COSY-TOF spectrometer. In this measurement both the new EMS-based data acquisition system and a delayed pulse technique have been used, which, in addition to particle identification, energy, time of flight, and angle determination provides pi+ identification for pions in the theta lab range from 2 to 28 degrees. The measured total cross section for this reaction is σ=4.1(4) μb at T p =793 MeV. Due to an improved efficiency correction, the earlier measured total cross section has been corrected to σ=1.6 μb at T p =747 MeV. This value agrees nicely with the results from WASA/PROMICE. The data are compared to previous data and theoretical models which have been developed to understand the results from WASA/PROMICE measurements. The measurements have been carried out with transversally polarized proton beam which made it possible to determine analyzing powers for different subsystems of the two pion production reaction. In contrast to predictions we find significant analyzing power values up to A y =0.3. The data in the range of Roper excitation confirm that the dominating π π decay channel is N * →Nσ. (orig.)

  12. Conceptualizing Student Affect for Science and Technology at the Middle School Level: Development and Implementation of a Measure of Affect in Science and Technology (MAST)

    Science.gov (United States)

    Romine, William L.; Sadler, Troy D.; Wulff, Eric P.

    2017-10-01

    We describe the development of the Measure of Affect in Science and Technology (MAST), and study its usefulness for measuring science affect in middle school students via both classical and Rasch measurement perspectives. We then proceed to utilize the measurement structure of the MAST to understand how middle school students at varying levels of affect express their interest and attitudes toward science and technology and gender differences in how students express their affect. We found that affect in science and technology comprises a main dimension, science interest, and four peripheral dimensions: interest in careers in science and technology, attitudes toward science, and interest in attending science class. Of these, careers in science and technology carry the highest affective demand. While males showed higher levels of personal and situational interest in science, a greater interest in careers in science and technology was the biggest contributor to males' higher affect toward science and technology. We argue that whether the MAST is used as a measure of a single construct or multiple subconstructs depends upon specific research or evaluation goals; however, both uses of the MAST yield measures which produce valid inferences for student affect.

  13. Act of 18 July 1966 on Third Party Liability in the Field of Nuclear Energy, establishing certain measures regarding implementation of the Paris Convention and its additional protocol

    International Nuclear Information System (INIS)

    1966-01-01

    This Act on nuclear third party liability lays down that certain Articles (definitions, liability, scope and amounts of liability, insurance) of the Convention on Third Party Liability in the Field of Nuclear Energy (Paris Convention) are immediately applicable in Belgium. It stipulates that a nuclear operator is recognised as such by the King when he furnishes proof that he has taken out insurance or other financial security to cover his liability under this Act, without prejudice to implementation of legal and regulatory provisions on protection of the population against the hazards of ionizing radiations. Finally, the operator of a nuclear installation must take out and maintain, for each installation, insurance approved by the appropriate authorities; if the State itself operates a nuclear installation, it has no obligation to take out insurance or other financial security. (NEA) [fr

  14. The ascorbate peroxidase APX1 is a direct target of a zinc finger transcription factor ZFP36 and a late embryogenesis abundant protein OsLEA5 interacts with ZFP36 to co-regulate OsAPX1 in seed germination in rice.

    Science.gov (United States)

    Huang, Liping; Jia, Jing; Zhao, Xixi; Zhang, MengYao; Huang, Xingxiu; E Ji; Ni, Lan; Jiang, Mingyi

    2018-01-01

    Seed germination is a vital developmental process. Abscisic acid (ABA) is an essential repressor of seed germination, while ROS (reactive oxygen species) also plays a vital role in regulating seed germination. ABA could inhibit the production of ROS in seed germination, but the mechanism of ABA reduced ROS production in seed germination was hitherto unknown. Here, by ChIP (chromatin immunoprecipitation)-seq, we found that ZFP36, a rice zinc finger transcription factor, could directly bind to the promoter of OsAPX1, coding an ascorbate peroxidase (APX) which has the most affinity for H 2 O 2 (substrate; a type of ROS), and act as a transcriptional activator of OsAPX1 promoter. Moreover, ZFP36 could interact with a late embryogenesis abundant protein OsLEA5 to co-regulate the promoter activity of OsAPX1. The seed germination is highly inhibited in ZFP36 overexpression plants under ABA treatment, while an RNA interference (RNAi) mutant of OsLEA5 rice seeds were less sensitive to ABA, and exogenous ASC (ascorbate acid) could alleviate the inhibition induced by ABA. Thus, our conclusion is that OsAPX1 is a direct target of ZFP36 and OsLEA5 could interact with ZFP36 to co-regulate ABA-inhibited seed germination by controlling the expression of OsAPX1. Copyright © 2017. Published by Elsevier Inc.

  15. Observations and Measurements of Wing Parameters of the Selected Beetle Species and the Design of a Mechanism Structure Implementing a Complex Wing Movement

    Directory of Open Access Journals (Sweden)

    Geisler T.

    2016-12-01

    Full Text Available Beetle wings perform a flapping movement, consisting of the rotation relative to the two axes. This paper presents the results of observations and measurements of wings operating parameters in different planes of some beetle species. High speed photos and videos were used. The concept of the mechanism performing a complex wing movement was proposed and developed.

  16. Observations and Measurements of Wing Parameters of the Selected Beetle Species and the Design of a Mechanism Structure Implementing a Complex Wing Movement

    Science.gov (United States)

    Geisler, T.

    2016-12-01

    Beetle wings perform a flapping movement, consisting of the rotation relative to the two axes. This paper presents the results of observations and measurements of wings operating parameters in different planes of some beetle species. High speed photos and videos were used. The concept of the mechanism performing a complex wing movement was proposed and developed.

  17. Choice of spatial resolution measurement methods to implement: considerations under a “New Laboratory”-scenario for imaging optical testing and research

    CSIR Research Space (South Africa)

    Theron, B

    2013-04-01

    Full Text Available A key imaging quality metric for an optical system (e.g. a camera or surveillance device) is its resolution. Methods to measure this, range from visual observation methods on resolution target charts, through more rigorous characterization, e...

  18. The experience of some European Countries in the implementation of preventive measures against the phenomenon of violence and aggression at football stadiums

    Directory of Open Access Journals (Sweden)

    Samuel Uhrin

    2013-12-01

    Full Text Available The article sets forward the experience of the Slovak Republic in the field of prevention of violence and aggression in football stadiums. The text discusses initiatives aiming at dimnishing this alarming and increasing in size phenomenon. The experiences stemming from preventive measures which have been taken in this regard in other European countries, have also been brought closer in the text.

  19. Implementation of Kalman filter algorithm on models reduced using singular pertubation approximation method and its application to measurement of water level

    Science.gov (United States)

    Rachmawati, Vimala; Khusnul Arif, Didik; Adzkiya, Dieky

    2018-03-01

    The systems contained in the universe often have a large order. Thus, the mathematical model has many state variables that affect the computation time. In addition, generally not all variables are known, so estimations are needed to measure the magnitude of the system that cannot be measured directly. In this paper, we discuss the model reduction and estimation of state variables in the river system to measure the water level. The model reduction of a system is an approximation method of a system with a lower order without significant errors but has a dynamic behaviour that is similar to the original system. The Singular Perturbation Approximation method is one of the model reduction methods where all state variables of the equilibrium system are partitioned into fast and slow modes. Then, The Kalman filter algorithm is used to estimate state variables of stochastic dynamic systems where estimations are computed by predicting state variables based on system dynamics and measurement data. Kalman filters are used to estimate state variables in the original system and reduced system. Then, we compare the estimation results of the state and computational time between the original and reduced system.

  20. Central Office Supports for Data-Driven Talent Management Decisions: Evidence from the Implementation of New Systems for Measuring Teacher Effectiveness

    Science.gov (United States)

    Grissom, Jason A.; Rubin, Mollie; Neumerski, Christine M.; Cannata, Marisa; Drake, Timothy A.; Goldring, Ellen; Schuermann, Patrick

    2017-01-01

    School districts increasingly push school leaders to utilize multiple measures of teacher effectiveness, such as observation ratings or value-added scores, in making talent management decisions, including teacher hiring, assignment, support, and retention, but we know little about the local conditions that promote or impede these processes. We…

  1. Implementation of trigger algorithms and studies for the measurement of the Higgs boson self-coupling in the ATLAS experiment at the LHC

    CERN Document Server

    Dahlhoff, Andrea

    2006-01-01

    At the LHC in Geneva the ATLAS experiment will start at 2007. The first part of the present work describes the implementation of trigger algorithms for the Jet/Energy Processor (JEP) as well as all other required features like controlling, diagnostics and read-out. The JEP is one of three processing units of the ATLAS Level-1 Calorimeter Trigger. It identifies and finds the location of jets, and sums total and missing transverse energy information from the trigger data. The Jet/Energy Module (JEM) is the main module of the JEP. The JEM prototype is designed to be functionally identical to the final production module for ATLAS. The thesis presents a description of the architecture, required functionality, and jet and energy summation algorithm of the JEM. Various input test vector patterns were used to check the performance of the comlete energy summation algorithm. The test results using two JEM prototypes are presented and discussed. The subject of the second part is a Monte-Carlo study which determines the ...

  2. Fiscal 1999 survey report. Basic survey for promotion of joint implementations, etc. (Energy conservation measures for limekilns); 1999 nendo sekkai shoseirio no sho energy taisaku chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Most of the limekilns now in operation in China are of the old type, demanding 30% more heat than limekilns in general use for instance in Japan. The survey assesses the effect of energy conservation or greenhouse gas reduction in case the old limekilns are replaced by new ones. For the implementation of this survey, the Benxi Iron and Steel Complex in Benxi City, Liaoning Province, China, who hope that their old limekilns will be replaced, is assumed to be the site of construction. A survey is conducted on this assumption, and the effect of greenhouse gas reduction in case new limekilns are popularized in China is also assessed. Under this program, the earth kilns will be abolished, to be replaced by 600 tons/day new limekilns. However, some of the single cylinder shaft kilns are to be retained. It is concluded that fuel consumption will be reduced by 7.49 times 10{sup 3} tons/year in terms of crude oil, fuel cost by 10,120,000 yuan/year, and CO2 emissions by 23,200 tons/year. The installation will cost 991-million yen, and the investment recovery period will be 7.9 years. The amount of metallurgical lime that China produces is 10-million tons/year, of which 70% comes from the old limekilns. After completion of the replacement there will be 33 limekilns, and the need is quite great. (NEDO)

  3. Implementation of electrochemical, optical and denuder-based sensors and sampling techniques on UAV for volcanic gas measurements: examples from Masaya, Turrialba and Stromboli volcanoes

    Science.gov (United States)

    Rüdiger, Julian; Tirpitz, Jan-Lukas; Maarten de Moor, J.; Bobrowski, Nicole; Gutmann, Alexandra; Liuzzo, Marco; Ibarra, Martha; Hoffmann, Thorsten

    2018-04-01

    Volcanoes are a natural source of several reactive gases (e.g., sulfur and halogen containing species) and nonreactive gases (e.g., carbon dioxide) to the atmosphere. The relative abundance of carbon and sulfur in volcanic gas as well as the total sulfur dioxide emission rate from a volcanic vent are established parameters in current volcano-monitoring strategies, and they oftentimes allow insights into subsurface processes. However, chemical reactions involving halogens are thought to have local to regional impact on the atmospheric chemistry around passively degassing volcanoes. In this study we demonstrate the successful deployment of a multirotor UAV (quadcopter) system with custom-made lightweight payloads for the compositional analysis and gas flux estimation of volcanic plumes. The various applications and their potential are presented and discussed in example studies at three volcanoes encompassing flight heights of 450 to 3300 m and various states of volcanic activity. Field applications were performed at Stromboli volcano (Italy), Turrialba volcano (Costa Rica) and Masaya volcano (Nicaragua). Two in situ gas-measuring systems adapted for autonomous airborne measurements, based on electrochemical and optical detection principles, as well as an airborne sampling unit, are introduced. We show volcanic gas composition results including abundances of CO2, SO2 and halogen species. The new instrumental setups were compared with established instruments during ground-based measurements at Masaya volcano, which resulted in CO2 / SO2 ratios of 3.6 ± 0.4. For total SO2 flux estimations a small differential optical absorption spectroscopy (DOAS) system measured SO2 column amounts on transversal flights below the plume at Turrialba volcano, giving 1776 ± 1108 T d-1 and 1616 ± 1007 T d-1 of SO2 during two traverses. At Stromboli volcano, elevated CO2 / SO2 ratios were observed at spatial and temporal proximity to explosions by airborne in situ measurements. Reactive

  4. Implementation of electrochemical, optical and denuder-based sensors and sampling techniques on UAV for volcanic gas measurements: examples from Masaya, Turrialba and Stromboli volcanoes

    Directory of Open Access Journals (Sweden)

    J. Rüdiger

    2018-04-01

    Full Text Available Volcanoes are a natural source of several reactive gases (e.g., sulfur and halogen containing species and nonreactive gases (e.g., carbon dioxide to the atmosphere. The relative abundance of carbon and sulfur in volcanic gas as well as the total sulfur dioxide emission rate from a volcanic vent are established parameters in current volcano-monitoring strategies, and they oftentimes allow insights into subsurface processes. However, chemical reactions involving halogens are thought to have local to regional impact on the atmospheric chemistry around passively degassing volcanoes. In this study we demonstrate the successful deployment of a multirotor UAV (quadcopter system with custom-made lightweight payloads for the compositional analysis and gas flux estimation of volcanic plumes. The various applications and their potential are presented and discussed in example studies at three volcanoes encompassing flight heights of 450 to 3300 m and various states of volcanic activity. Field applications were performed at Stromboli volcano (Italy, Turrialba volcano (Costa Rica and Masaya volcano (Nicaragua. Two in situ gas-measuring systems adapted for autonomous airborne measurements, based on electrochemical and optical detection principles, as well as an airborne sampling unit, are introduced. We show volcanic gas composition results including abundances of CO2, SO2 and halogen species. The new instrumental setups were compared with established instruments during ground-based measurements at Masaya volcano, which resulted in CO2 ∕ SO2 ratios of 3.6 ± 0.4. For total SO2 flux estimations a small differential optical absorption spectroscopy (DOAS system measured SO2 column amounts on transversal flights below the plume at Turrialba volcano, giving 1776 ± 1108 T d−1 and 1616 ± 1007 T d−1 of SO2 during two traverses. At Stromboli volcano, elevated CO2 ∕ SO2 ratios were observed at spatial and temporal proximity

  5. What Effect Did General Order Number 1 and the Force Protection Measures Have on Task Force Eagle Operations in Bosnia During Implementation Force?

    Science.gov (United States)

    2002-06-06

    avoidance of casualties is essential to preserve domestic support, it may be a necessary price to pay. Another possible motive, however, could be...higher. Right or wrong, this discrepancy nurtured a variety of interpretations. Whilst describing the measures as “based on a profound concern with...soldiers in twos and threes, on PT runs in town, dressed in spiffy Adidas gear, was he confident that the area really was secure. As an aside, this is a

  6. Method for on-state measurement, trend analysis and long-term monitoring of radiation exposures in the private environment, and device for implementing the process

    International Nuclear Information System (INIS)

    Jitschin, W.; Kalwar, K.

    1987-01-01

    Plans are made to carry out measurements by means of a radiation detector, to transmit the data to a data processing computer and to display the calculated data on one or several data output devices. The data output device can be a monitor of the computer, a television set, or an electronic printer. The computer can be a cheap, commercially available, programmable minicomputer, a home computer or a personal computer. (orig./HP) [de

  7. Implementation of a Novel Laser System for Simultaneous Measurement of 13C/12C and D/H to Food Provenance

    Science.gov (United States)

    Saad, N.; Hoffnagle, J.

    2012-04-01

    Olive oil samples were analyzed using the world's first simultaneous δ13C + δD instrument, the 13C+D Combustion Module-Cavity Ringdown Spectroscopy (CM-CRDS) Isotope Analyzer. Simultaneous measurements of δ13C and δD of the whole oil have been performed on commercially available olive oils produced in Greece, Spain, Italy, California, Lebanon, Israel, Australia and Turkey. Together, the measurements of isotopic ratios of carbon (13C/12C) and hydrogen (D/H) produce statistically significant differentiation between olive oils from different locations around the globe. Stable isotope ratios are exquisitely sensitive to the biochemistry of plant species and the nutrients available to them in a particular geographical location. Isotope ratios provide detailed knowledge useful for forensic applications through a combination of stable-isotope measurements of carbon (13C/12C) and hydrogen (D/H) isotopes of organic matter and can help the associations among specific geographic areas through the measurement of these dual isotopes. We report here on the development of a novel laser spectroscopy based system for the simultaneous analysis of the stable isotope ratios of carbon (13C/12C) and hydrogen (D/H) that is robust, easy-to-use, and is the first stable isotope ratio analysis system to combine the measurement of 13C/12C and D/H in one simple analysis from a bulk organic sample. The system comprises a combustion module to convert the organic sample into CO2 and H2O and a Cavity Ring-Down Spectrometer (CRDS) that analyzes the combustion species inside an optical cavity based on the molecular absorption of individual isotopomers. The CRDS uses dual lasers to target the four isotpomers of interest: 12CO2, 13CO2, H2O and HDO. The system delivers a typical precision of 0.1permil for δ13C and 1.5 permil for δD that parallels that achieved by IRMS, but with an unprecedented simplicity that allows scientists to leverage the science and map out the provenance of the analyzed

  8. Radiological Protection Measurements Implemented during the 16. Pan American and 4. ParaPan American Games: Guadalajara, Mexico, 2011; Medidas de seguridad radiologica implementadas durante los 16. Juegos Panamericanos y 4. Juegos Parapanamericanos: Guadalajara, Mexico, 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-02-15

    Terrorism remains a threat to international stability and security. Often national and international high level public events are the subject of much public interest and receive extensive coverage in the media. In this sense, it is well known that there is a real threat of a terrorist attack in important public events, such as major economic summits, high level political meetings or sporting events. In 1955 and 1975, the 2nd and 7th Pan American Games were organized by the City of Mexico. In 2011, the Pan American Games was the third event of its kind held in Guadalajara, Jalisco. At the national level, the implementation of nuclear security measures in the Pan American Games laid the foundations for a sustainable national nuclear security framework that will continue long after the event. The political decision, the existing legal basis and structure, agency coordination facilitated the incorporation of nuclear security measures. It was also a challenge to integrate all the relevant organizations, provide focus to the threat of terrorism linked to weapons of mass destruction for security games, plan resources and execute the project on time, among other details. For this reason, information and lessons learned that are reported in this document, received in Mexico during the 16th edition of the Pan American Games will be useful for the implementation of nuclear security measures in States with similar situations.

  9. Development, implementation and utilization of 210Pb in vivo measurement techniques as indicator of human being exposure to 222Rn - evaluation of associated parameters

    International Nuclear Information System (INIS)

    Dantas, Ana Leticia Almeida

    2005-01-01

    Radon and its decay products are present in the atmosphere and are the most important contributors for the internal exposure of humans to natural radiation. The execution of in vivo measurements of 210 Pb in the population and in individuals occupationally exposed in underground mines has been studied and recommended as one of the procedures for the estimation of the exposure to 222 Rn. The metabolism of 210 Pb and its distribution within the human body, mainly deposited in the bone tissue, suggests the regions of skull and knee as the most suitable for the in vivo monitoring of such radionuclide. A radiological survey in non uranium mines in Brazil indicated that an underground coal mine in the State of Parana, in the south of Brazil, had high radon concentration. The aim of this work were: (1) To investigate whether underground coal miners may also have elevated 210 Pb in the skeleton as a result of occupational exposure to radon in the coal mine; (2) To estimate the committed equivalent dose and the committed effective dose in different incorporation scenarios using a computer code. The calibration and the in vivo measurements of underground coal miners were performed in the IRD-CNEN Whole Body Counter shielded room using an array of four high resolution germanium detectors. The detection system was positioned at the head and knee geometries. The minimum detectable quantity of 210 Pb in the skeleton using this methodology was (50 Bq) and the positive results were verified using a mathematical method that applies a moving median smoothing function to the total spectrum for each measurement. In vivo measurements of 210 Pb in 6 out of the 32 underground coal miners ranged between 83 Bq and 164 Bq suggesting that these workers received significant occupational cumulative exposure to 222 Rn. The simulation of some exposure patterns of 222 Rn progeny and 210 Pb incorporation showed that the most important contribution for 210 Pb skeleton deposition was the intake of

  10. IMPLEMENTANDO UNA ECUACIÓN ESTADÍSTICA PARA MEDIR EL COLAPSO EN LA ANTIGUA MESOAMÉRICA (Implementing a Statistical Equation to Measure Collapse in Ancient Mesoamerica

    Directory of Open Access Journals (Sweden)

    Pascual Izquierdo-Egea

    2018-12-01

    Full Text Available Se propone la implementación de una ecuación estadística capaz de medir el riesgo de colapso en las antiguas civilizaciones a partir de su registro funerario, probándola con éxito en la Mesoamérica prehispánica. ENGLISH: This brief communication presents the successful test of a statistical means to measure collapse risk in ancient civilizations with the mortuary record using data from pre-Hispanic Mesoamerica.

  11. Preventive measures to prevent loss to follow-up in highly active antiretroviral therapy (HAART): implementing a strategy in Ziguinchor (Casamance, Senegal) in 2014.

    Science.gov (United States)

    Randé, H; Rouffy, D

    2016-05-01

    Since 2010, the Pharmacie et Aide Humanitaire (PAH) in Casamance (Senegal) has been maintaining a software package (Tacojo) that allows monthly monitoring of the distribution of treatment to every patient with HIV infection receiving highly active antiretroviral therapy (HAART). We used this program to set up measures to prevent the loss to follow-up of patients receiving HAART. Our involvement focused on two main areas. First, each patient is routinely contacted after inclusion, to help us to understand the patient's experience of the disease and the treatment. This process aims to improve adherence to the treatment. Then, all patients who miss an appointment are routinely contacted by telephone within seven days of that appointment. The goal is to understand the reasons for the absence and to encourage patients to continue their treatment. Despite the lack of distance due to the relative newness of this program, these preventive measures have shown hopeful results (80% of the patients came back after a call). It would be interesting to apply it in a sustainable manner and in more medical facilities.

  12. Implementing a Global Tool for Mercy Corps Based on Spatially Continuous Precipitation Analysis for Resiliency Monitoring and Measuring at the Community-Scale

    Science.gov (United States)

    Tomlin, J. N.; El-Behaedi, R.; McCartney, S.; Lingo, R.; Thieme, A.

    2017-12-01

    Global water resources are important for societies, economies, and the environment. In Niger, limited water resources restrict the expansion of agriculture and communities. Mercy Corps currently works in over 40 countries around the world to address a variety of stresses which include water resources and building long-term food resilience. As Mercy Corps seeks to integrate the use of Earth observations, NASA has established a partnership to help facilitate this effort incorporating Tropical Rainfall Measuring Mission (TRMM), Global Precipitation Measurement (GPM), and Climate Hazards Group InfraRed Precipitation with Station (CHIRPS) data to create a standardized precipitation index that highlights low and high rainfall from 1981 - 2016. The team created a Google Earth Engine tool that combines precipitation data with other metrics of stress in Niger. The system is designed to be able to incorporate groundwater storage data as it becomes available. This tool allows for near real-time updates of trends in precipitation and improves Mercy Corps' ability to spatially evaluate changes in resiliency by monitoring shocks and stressors.

  13. Quarkonia production in small and large systems measured by ATLAS

    CERN Document Server

    Lopez, Jorge; The ATLAS collaboration

    2018-01-01

    The experimentally observed dissociation and regeneration of bound quarkonium states in heavy-ion collisions provide a powerful tool to probe the dynamics of the hot, dense plasma. These measurements are sensitive to the effects of color screening, color recombination, or other, new suppression mechanisms. In the large-statistics Run 2 lead-lead and proton-lead collision data, these phenomena can be probed with unprecedented precision. Measurements of the ground and excited quarkonia states, as well as their separation into prompt and non-prompt components, provide further opportunities to study the dynamics of heavy parton energy loss in these large systems. In addition, quarkonium production rates, and their excited to ground states ratios, in small, asymmetric systems are an interesting probe of cold nuclear matter effects. In this talk, the latest ATLAS results on quarkonia production will be presented, including new, differential measurements of charmonium suppression and azimuthal modulation in lead-lea...

  14. Measuring border delay and crossing times at the US-Mexico border : part II. Step-by-step guidelines for implementing a radio frequency identification (RFID) system to measure border crossing and wait times.

    Science.gov (United States)

    2012-06-01

    The purpose of these step-by-step guidelines is to assist in planning, designing, and deploying a system that uses radio frequency identification (RFID) technology to measure the time needed for commercial vehicles to complete the northbound border c...

  15. Secondary prevention of cervical cancer through the development and implementation of a system to optimize diagnostic and therapeutic and rehabilitation measures in the background and precancerous cervical diseases

    Directory of Open Access Journals (Sweden)

    F. F. Badretdinova

    2012-01-01

    Full Text Available The results of a comprehensive evaluation and treatment of background and pre-cancerous cervical cancer of women were studied (n = 1022. There is the complex assessment of social and obstetric gynecological risk factors for cervical intraepithelial neoplasia and cervical cancer. A system for optimizing diagnostic, therapeutic, preventive and rehabilitative measures, taking into account the differentiated approach to the choice of treatment, follow-up in the near and long-term postoperative period. An individual approach to the selection of organ presentation or radical treatment using new technologies of surgical treatment are identified. Application of the developed system enabled a statistically significantly improve the results of treatment of background and precancerous cervical disease.

  16. CI Implementation

    DEFF Research Database (Denmark)

    Jørgensen, Frances; Boer, Harry; Laugen, Bjørge Timenes

    2006-01-01

    There are a number of tools available for organizations wishing to measure and subsequently develop Continuous Improvement (CI). In this article, we review and evaluate a well-accepted CI development model, namely the CI Maturity Model (Bessant and Caffyn, 1997), against data collected from the 2nd...... Continuous Improvement Network Survey and a number of empirical cases described in the literature. While the CI Maturity Model suggests that CI maturation ought to be a linear process, the findings in this article suggest that there are feasible alternatives for companies to develop CI capability....

  17. Questionnaire-based survey on structural quality of hospitals and nursing homes for the elderly, their staffing with infection control personal, and implementation of infection control measures in Germany.

    Science.gov (United States)

    Kramer, A; Assadian, O; Helfrich, J; Krüger, C; Pfenning, I; Ryll, S; Perner, A; Loczenski, B

    2013-01-01

    From January to May 2012, 1,860 hospitals throughout Germany received a questionnaire encompassing 77 items. Additionally, 300 outpatient care services and 310 nursing homes for elderly in Berlin also received a 10-item questionnaire asking on their implemented infection control practices. All questionnaires were anonymous. A total of 229 completed questionnaires from hospitals, 14 questionnaires from outpatient care services, and 16 questionnaires from nursing homes were eligible for further analysis. The lack of Infection Control physicians was identified as the largest issue. In hospitals sized 400-999 beds a gap of 71%, and in hospitals sized ≥1,000 beds a gap of 17% was reported. Depending on the number of hospital beds, 13-29% of hospitals sized ≥100 beds reported not havening one infection control nurse. Since based on the number of beds in larger institutions or in facilities caring for high-risk patients several infection control nurses may be required, the deficiency in infection control nurses may even be higher, particularly in secondary and tertiary care facilities. Furthermore, the analysis revealed that the legal requirements for surveillance and reporting of notifiable infectious diseases have not yet been implemented in 11% of the facilities. The implementation of antibiotic strategies did show significant gaps. However, deficiencies in the implemented measures for the prevention of surgical site infections were less frequent. Yet 12% of the participants did not have a dedicated infection control concept for their surgical services. Eight percent of hospitals were not prepared for an outbreak management and 10% did not have established regulations for wearing surgical scrubs. Deficiencies in waste disposal and the control of air-conditioning systems were also noted. Based on the results of this survey, conclusions on the optimal resource allocation for further improvement of patient safety may be drawn. While all participating nursing homes had

  18. A matched pair cluster randomized implementation trail to measure the effectiveness of an intervention package aiming to decrease perinatal mortality and increase institution-based obstetric care among indigenous women in Guatemala: study protocol.

    Science.gov (United States)

    Kestler, Edgar; Walker, Dilys; Bonvecchio, Anabelle; de Tejada, Sandra Sáenz; Donner, Allan

    2013-03-21

    Maternal and perinatal mortality continue to be a high priority problem on the health agendas of less developed countries. Despite the progress made in the last decade to quantify the magnitude of maternal mortality, few interventions have been implemented with the intent to measure impact directly on maternal or perinatal deaths. The success of interventions implemented in less developed countries to reduce mortality has been questioned, in terms of the tendency to maintain a clinical perspective with a focus on purely medical care separate from community-based approaches that take cultural and social aspects of maternal and perinatal deaths into account. Our innovative approach utilizes both the clinical and community perspectives; moreover, our study will report the weight that each of these components may have had on reducing perinatal mortality and increasing institution-based deliveries. A matched pair cluster-randomized trial will be conducted in clinics in four rural indigenous districts with the highest maternal mortality ratios in Guatemala. The individual clinic will serve as the unit of randomization, with 15 matched pairs of control and intervention clinics composing the final sample. Three interventions will be implemented in indigenous, rural and poor populations: a simulation training program for emergency obstetric and perinatal care, increased participation of the professional midwife in strengthening the link between traditional birth attendants (TBA) and the formal health care system, and a social marketing campaign to promote institution-based deliveries. No external intervention is planned for control clinics, although enhanced monitoring, surveillance and data collection will occur throughout the study in all clinics throughout the four districts. All obstetric events occurring in any of the participating health facilities and districts during the 18 months implementation period will be included in the analysis, controlling for the cluster

  19. Auditing Marketing Strategy Implementation Success

    OpenAIRE

    Herhausen, Dennis; Egger, Thomas; Oral, Cansu

    2014-01-01

    What makes a marketing strategy implementation successful and how can managers measure this success? To answer these questions, we developed a two-step audit approach. First, managers should measure the implementation success regarding effectiveness, efficiency, performance outcomes, and strategic embeddedness. Second, they should explore the reasons that have led to success or failure by regarding managerial, leadership, and environmental traps. Doing so will also provide corrective action p...

  20. A pilot study of a new spectrophotometry device to measure tissue oxygen saturation.

    Science.gov (United States)

    Abel, Gemma; Allen, John; Drinnan, Michael

    2014-09-01

    Tissue oxygen saturation (SO2) measurements have the potential for far wider use than at present but are limited by device availability and portability for many potential applications. A device based on a small, low-cost general-purpose spectrophotometer (the Harrison device) might facilitate wider use. The aim of this study was to compare the Harrison device with a commercial instrument, the LEA O2C.Measurements were carried out on the forearm and finger of 20 healthy volunteers, using a blood pressure cuff on the upper arm to induce different levels of oxygenation. Repeatability of both devices was assessed, and the Bland-Altman method was used to assess agreement between them.The devices showed agreement in overall tracking of changes in SO2. Test-retest agreement for the Harrison device was worse than for O2C, with SD repeatability of 10.6% (forearm) or 18.6% (finger). There was no overall bias between devices, but mean (SD) difference of 1.2 (11.8%) (forearm) or 4.4 (11.5%) (finger) were outside of a clinically acceptable range.Disagreements were attributed to the stability of the Harrison probe and the natural SO2 variations across the skin surface increasing the random error. Therefore, though not equivalent to the LEA O2C, a probe redesign and averaged measurements may help establish the Harrison device as a low cost alternative.