WorldWideScience

Sample records for learning technologies project

  1. Live from Space Station Learning Technologies Project

    Science.gov (United States)

    2001-01-01

    This is the Final Report for the Live From Space Station (LFSS) project under the Learning Technologies Project FY 2001 of the MSFC Education Programs Department. AZ Technology, Inc. (AZTek) has developed and implemented science education software tools to support tasks under the LTP program. Initial audience consisted of 26 TreK in the Classroom schools and thousands of museum visitors to the International Space Station: The Earth Tour exhibit sponsored by Discovery Place museum.

  2. Distance Learning With NASA Lewis Research Center's Learning Technologies Project

    Science.gov (United States)

    Petersen, Ruth

    1998-01-01

    The NASA Lewis Research Center's Learning Technologies Project (LTP) has responded to requests from local school district technology coordinators to provide content for videoconferencing workshops. Over the past year we have offered three teacher professional development workshops that showcase NASA Lewis-developed educational products and NASA educational Internet sites. In order to determine the direction of our involvement with distance learning, the LTP staff conducted a survey of 500 U.S. schools. We received responses from 72 schools that either currently use distance learning or will be using distance learning in 98-99 school year. The results of the survey are summarized in the article. In addition, the article provides information on distance learners, distance learning technologies, and the NASA Lewis LTP videoconferencing workshops. The LTP staff will continue to offer teacher development workshops through videoconferencing during the 98-99 school year. We hope to add workshops on new educational products as they are developed at NASA Lewis.

  3. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  4. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  5. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  6. Collaborative Project-Based Learning: An Integrative Science and Technological Education Project

    Science.gov (United States)

    Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

    2017-01-01

    Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills. Purpose: The study aims to understand how seventh grade students…

  7. Application of Technology in Project-Based Distance Learning

    Directory of Open Access Journals (Sweden)

    Ali Mehrabian

    2008-06-01

    Full Text Available Present technology and the accessibility of internet have made distance learning easier, more efficient, and more convenient for students. This technology allows instructors and students to communicate asynchronously, at times and locations of their own choosing, by exchanging printed or electronic information. The use of project-based approach is being recognized in the literature as a potential component of courses in the faculties of engineering, science, and technology. Instructors may have to restructure their course differently to accommodate and facilitate the effectiveness of distance learning. A project-based engineering course, traditionally taught in a classroom settings using live mode at the College of Engineering and Computer Sciences at the University of Central Florida (UCF has been transformed to a distance course taught using distance modes. In this case, pedagogical transitions and adjustments are required, in particular for obtaining an optimal balance between the course material and the project work. Project collaboration in groups requires communication, which is possible with extensive utilization of new information and communication technology, such as virtual meetings. This paper discusses the course transition from live to distance modes and touches on some issues as they relate to the effectiveness of this methodology and the lessons learned from its application within different context. More specifically, this discussion includes the benefit of implementing project-based work in the domain of the distance learning courses.

  8. Learning in Authentic Contexts: Projects Integrating Spatial Technologies and Fieldwork

    Science.gov (United States)

    Huang, Kuo-Hung

    2011-01-01

    In recent years, professional practice has been an issue of concern in higher education. The purpose of this study is to design students' projects to facilitate collaborative learning in authentic contexts. Ten students majoring in Management Information Systems conducted fieldwork with spatial technologies to collect data and provided information…

  9. Choose to Use: Scaffolding for Technology Learning Needs in a Project-Based Learning Environment

    Science.gov (United States)

    Weimer, Peggy D.

    2017-01-01

    Project-based learning is one approach used by teachers to meet the challenge of developing more technologically proficient students. This approach, however, requires students to manage a large number of tasks including the mastery of technology. If a student's perception that their capability to perform a task falls below the task's difficulty,…

  10. Bringing Technology to Students’ Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Directory of Open Access Journals (Sweden)

    Evode Mukama

    2014-12-01

    Full Text Available This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ sociocultural proximity, the more focused the learners’ attention is on these objects. The study shows also that a change in learning projects may depend to a large extent on whether the technology relates to the students’ sociocultural proximity, that is, taking into consideration students’ physical, cultural, and contextual real world. The study recommends a community of learning/inquiry embedded in a collaborative, problem-solving dynamic involving cognitive support from peers, teachers, external specialists, and the wider community.

  11. Bringing Technology to Students' Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Science.gov (United States)

    Mukama, Evode

    2014-01-01

    This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus group discussions and field…

  12. Interdisciplinary project-based learning: technology for improving student cognition

    OpenAIRE

    Natalia Stozhko; Boris Bortnik; Ludmila Mironova; Albina Tchernysheva; Ekaterina Podshivalova

    2015-01-01

    The article studies a way of enhancing student cognition by using interdisciplinary project-based learning (IPBL) in a higher education institution. IPBL is a creative pedagogic approach allowing students of one area of specialisation to develop projects for students with different academic profiles. The application of this approach in the Ural State University of Economics resulted in a computer-assisted learning system (CALS) designed by IT students. The CALS was used in an analytical chemi...

  13. Harnessing the Power of Technologies to Manage Collaborative e-Learning Projects in Dispersed Environments

    Science.gov (United States)

    Gosper, Maree Veroncia; McNeill, Margot Anne; Woo, Karen

    2010-01-01

    "The impact of web-based lecture technologies on current and future practice in learning and teaching" was a collaborative project across four Australian universities, funded by the Australian Learning and Teaching Council (ALTC). The project was both exploratory and developmental in nature and according to the project's external…

  14. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different partic...

  15. Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

    Science.gov (United States)

    Kumar, David Devraj

    2017-01-01

    This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

  16. Persuasive Technology for Learning and Teaching – The EuroPLOT Project

    OpenAIRE

    Behringer, R; Soosay, M; Gram-Hansen, SB; Øhrstrøm, P; Sørensen, CG; Smith, C; Mikulecká, J; Winther-Nielsen, N; Winther-Nielsen, M; Herber, E

    2013-01-01

    The concept of persuasive design has demonstrated its benefits by changing human behavior in certain situations, but in the area of education and learning, this approach has rarely been used. To change this and to study the feasibility of persuasive technology in teaching and learning, the EuroPLOT project (PLOT = Persuasive Learning Objects and Technologies) has been funded 2010-2013 by the Education, Audiovisual and Culture Executive Agency (EACEA) in the Life-long Learning (LLL) programme....

  17. Collaborative Visualization Project: shared-technology learning environments for science learning

    Science.gov (United States)

    Pea, Roy D.; Gomez, Louis M.

    1993-01-01

    Project-enhanced science learning (PESL) provides students with opportunities for `cognitive apprenticeships' in authentic scientific inquiry using computers for data-collection and analysis. Student teams work on projects with teacher guidance to develop and apply their understanding of science concepts and skills. We are applying advanced computing and communications technologies to augment and transform PESL at-a-distance (beyond the boundaries of the individual school), which is limited today to asynchronous, text-only networking and unsuitable for collaborative science learning involving shared access to multimedia resources such as data, graphs, tables, pictures, and audio-video communication. Our work creates user technology (a Collaborative Science Workbench providing PESL design support and shared synchronous document views, program, and data access; a Science Learning Resource Directory for easy access to resources including two-way video links to collaborators, mentors, museum exhibits, media-rich resources such as scientific visualization graphics), and refine enabling technologies (audiovisual and shared-data telephony, networking) for this PESL niche. We characterize participation scenarios for using these resources and we discuss national networked access to science education expertise.

  18. Using Technology-Enhanced, Cooperative, Group-Project Learning for Student Comprehension and Academic Performance

    Science.gov (United States)

    Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

    2016-01-01

    Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly…

  19. The role of absorptive capactiy in technological learning in CDM projects : evidences from survey in Brazil, China, India and Mexico

    NARCIS (Netherlands)

    Doranova, A.; Costa, I.; Duysters, G.M.

    2011-01-01

    Technology transfer in Clean Development Mechanism (CDM) projects of the Kyoto Protocol has acquired increasing attention of policy makers and academia. This study is an effort to investigate CDM projects' related technology transfer process from the organisational learning and technological

  20. The role of absorptive capacity in technological learning in CDM projects : Evidences from survey in Brazil, China, India and Mexico

    NARCIS (Netherlands)

    Doranova, A.; Costa, I.; Duijsters, G.M.

    2011-01-01

    Technology transfer in Clean Development Mechanism (CDM) projects of the Kyoto Protocol has acquired increasing attention of policy makers and academia. This study is an effort to investigate CDM projects' related technology transfer process from the organisational learning and technological

  1. Using technology-enhanced, cooperative, group-project learning for student comprehension and academic performance

    Science.gov (United States)

    Tlhoaele, Malefyane; Suhre, Cor; Hofman, Adriaan

    2016-05-01

    Cooperative learning may improve students' motivation, understanding of course concepts, and academic performance. This study therefore enhanced a cooperative, group-project learning technique with technology resources to determine whether doing so improved students' deep learning and performance. A sample of 118 engineering students, randomly divided into two groups, participated in this study and provided data through questionnaires issued before and after the experiment. The results, obtained through analyses of variance and structural equation modelling, reveal that technology-enhanced, cooperative, group-project learning improves students' comprehension and academic performance.

  2. Becoming Little Scientists: Technologically-Enhanced Project-Based Language Learning

    Science.gov (United States)

    Dooly, Melinda; Sadler, Randall

    2016-01-01

    This article outlines research into innovative language teaching practices that make optimal use of technology and Computer-Mediated Communication (CMC) for an integrated approach to Project-Based Learning. It is based on data compiled during a 10- week language project that employed videoconferencing and "machinima" (short video clips…

  3. The Impact of Project-Based Learning on Pre-Service Teachers' Technology Attitudes and Skills

    Science.gov (United States)

    Alexander, Curby; Knezek, Gerald; Christensen, Rhonda; Tyler-Wood, Tandra; Bull, Glen

    2014-01-01

    Researchers in this study looked at the effect of content-specific, technology-rich project-based learning activities on EC-8 pre-service teachers' competencies and skills, as well as pre-service teacher's attitudes toward science, technology, engineering and mathematics (STEM). Researchers employed a quantitative design involving participants in…

  4. Accomplishing PETE Learning Standards and Program Accreditation through Teacher Candidates' Technology-Based Service Learning Projects

    Science.gov (United States)

    Gibbone, Anne; Mercier, Kevin

    2014-01-01

    Teacher candidates' use of technology is a component of physical education teacher education (PETE) program learning goals and accreditation standards. The methods presented in this article can help teacher candidates to learn about and apply technology as an instructional tool prior to and during field or clinical experiences. The goal in…

  5. E-Learning and the Use of New Technologies in the "Kolumbus-Kids" Project in Germany

    Science.gov (United States)

    Wegner, Claas; Homann, Wiebke; Strehlke, Friederike; Borgmann, Annika

    2014-01-01

    This article presents the science project "Kolumbus-Kids" as an example of the innovative use of "E-Learning" and other "new technologies" to advance student learning and new-media education. The project benefits from various technology-based education strategies and E-Learning scenarios which are employed during the…

  6. Fostering Foreign Language Learning through Technology-Enhanced Intercultural Projects

    Science.gov (United States)

    Chen, Jen Jun; Yang, Shu Ching

    2014-01-01

    The main aim of learning English as an international language is to effectively communicate with people from other cultures. In Taiwan, learners have few opportunities to experience cross-cultural communication in English. To create an authentic EFL classroom, this one-year action research study carried out three collaborative intercultural…

  7. Frames for Learning Science: Analyzing Learner Positioning in a Technology-Enhanced Science Project

    Science.gov (United States)

    Silseth, K.; Arnseth, H. C.

    2016-01-01

    In this article, we examine the relationship between how students are positioned in social encounters and how this influences learning in a technology-supported science project. We pursue this topic by focusing on the participation trajectory of one particular learner. The analysis shows that the student cannot be interpreted as one type of…

  8. Reflections on Students’ Projects with Motion Sensor Technologies in a Problem-Based Learning Environment

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga; Triantafyllidis, George

    2014-01-01

    Game-based learning (GBL) has been applied in many fields to enhance learning motivations. In recent years, motion sensor technologies have been also introduced in GBL with the aim of using active, physical modalities to facilitate the learning process, while fostering social development...... and collaboration (when these activities involve more than one student at a time). The approaches described in literature, which used motion sensors in GBL, cover a broad spectrum of educational fields. These approaches investigated the effect of learning games using motion sensors on the development of specific...... skills or on the learning experience. This paper presents our experiences on the educational use of motion sensor technologies. Our research was conducted at the department of Medialogy in Aalborg University Copenhagen. Aalborg University applies a problem-based, project-organized model of teaching...

  9. Integration of advanced technologies to enhance problem-based learning over distance: Project TOUCH.

    Science.gov (United States)

    Jacobs, Joshua; Caudell, Thomas; Wilks, David; Keep, Marcus F; Mitchell, Steven; Buchanan, Holly; Saland, Linda; Rosenheimer, Julie; Lozanoff, Beth K; Lozanoff, Scott; Saiki, Stanley; Alverson, Dale

    2003-01-01

    Distance education delivery has increased dramatically in recent years as a result of the rapid advancement of communication technology. The National Computational Science Alliance's Access Grid represents a significant advancement in communication technology with potential for distance medical education. The purpose of this study is to provide an overview of the TOUCH project (Telehealth Outreach for Unified Community Health; http://hsc.unm.edu/touch) with special emphasis on the process of problem-based learning case development for distribution over the Access Grid. The objective of the TOUCH project is to use emerging Internet-based technology to overcome geographic barriers for delivery of tutorial sessions to medical students pursuing rotations at remote sites. The TOUCH project also is aimed at developing a patient simulation engine and an immersive virtual reality environment to achieve a realistic health care scenario enhancing the learning experience. A traumatic head injury case is developed and distributed over the Access Grid as a demonstration of the TOUCH system. Project TOUCH serves as an example of a computer-based learning system for developing and implementing problem-based learning cases within the medical curriculum, but this system should be easily applied to other educational environments and disciplines involving functional and clinical anatomy. Future phases will explore PC versions of the TOUCH cases for increased distribution. Copyright 2003 Wiley-Liss, Inc.

  10. Post secondary project-based learning in science, technology, engineering and mathematics

    OpenAIRE

    Ralph, Rachel A.

    2016-01-01

    Project-based learning (PjBL - to distinguish from problem-based learning - PBL) has become a recurrent practice in K-12 classroom environments. As PjBL has become prominent in K-12 classrooms, it has also surfaced in post-secondary institutions.  The purpose of this paper is to examine the research that has studied a variety of science, technology, engineering and mathematic subjects using PjBL in post-secondary classrooms. Eleven articles (including qualitative, quantitative and mixed metho...

  11. Integrated learning of mathematics, science and technology concepts through LEGO/Logo projects

    Science.gov (United States)

    Wu, Lina

    This dissertation examined integrated learning in the domains of mathematics, science and technology based on Piaget's constructivism, Papert's constructionism, and project-based approach to education. Ten fifth grade students were involved in a two-month long after school program where they designed and built their own computer-controlled LEGO/Logo projects that required the use of gears, ratios and motion concepts. The design of this study centered on three notions of integrated learning: (1) integration in terms of what educational materials/settings provide, (2) integration in terms of students' use of those materials, and (3) integration in the psychological sense. In terms of the first notion, the results generally showed that the LEGO/Logo environment supported the integrated learning of math, science and technology concepts. Regarding the second notion, the students all completed impressive projects of their own design. They successfully combined gears, motors, and LEGO parts together to create motion and writing control commands to manipulate the motion. But contrary to my initial expectations, their successful designs did not require numerical reasoning about ratios in designing effective gear systems. When they did reason about gear relationships, they worked with "qualitative" ratios, e.g., "a larger driver gear with a smaller driven gear increases the speed." In terms of the third notion of integrated learning, there was evidence in all four case study students of the psychological processes involved in linking mathematical, scientific, and/or technological concepts together to achieve new conceptual units. The students not only made connections between ideas and experiences, but also recognized decisive patterns and relationships in their project work. The students with stronger overall project performances showed more evidence of synthesis than the students with relatively weaker performances did. The findings support the conclusion that all three

  12. Investigating the Quality of Project-Based Science and Technology Learning Environments in Elementary School: A Critical Review of Instruments

    Science.gov (United States)

    Thys, Miranda; Verschaffel, Lieven; Van Dooren, Wim; Laevers, Ferre

    2016-01-01

    This paper provides a systematic review of instruments that have the potential to measure the quality of project-based science and technology (S&T) learning environments in elementary school. To this end, a comprehensive literature search was undertaken for the large field of S&T learning environments. We conducted a horizontal bottom-up…

  13. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    Science.gov (United States)

    Tang, Tian; Popp, David

    2016-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

  14. A project based learning experience through best use of state-of-the-art technology

    Directory of Open Access Journals (Sweden)

    Juan José López Berrio

    2016-01-01

    Full Text Available Our proposal consists in activating the most important talent in the education institutions (their students, converting them in the change movement they need. How do we do that? We attract them through an enriching and disruptive programme, that suggest them a real entrepreneurship challenge, guiding and empowering them to reach the goals planned. Our vehicle is the Innovation Lab, a permanent program, where through a project based learning and working as a real and modern startup, the students work and collaborate using state of the art technology and methodologies, such as cloud computing, design thinking, flipped classroom, gamification, etc., by combining on-line work and sessions at school. The idea is revolutionary and innovative but also perfectly aligned with the content of the Horizon 2020-Schools Edition. We have achieved great results, both qualitative and quantitative, as you would be able to see along the article.

  15. Enhancements of Endogenous Technology Learning in the Western European MARKAL model. Contributions to the EU SAPIENT project

    International Nuclear Information System (INIS)

    De Feber, M.A.P.C.; Schaeffer, G.J.; Seebregts, A.J.; Smekens, K.E.L.

    2003-04-01

    The primary topic of the SAPIENT project and its predecessor TEEM has been the issue of incorporating technology learning endogenously in energy models and trying to determine the impact of public R and D on this learning process. ECN has incorporated the learning mechanism into the MARKAL model using an extended database for the Western Europe energy system. By using advanced modelling techniques (Mixed Integer Programming) and the concepts of key components and technology clusters more than 60 technologies in the power sector have been endowed with learning characteristics. By this approach solving times could be kept within a reasonable length, i.e. less than 20 minutes per run. An important insight gained from model runs with many learning technologies, including conventional technologies, is that new technologies aiming to 'beat' conventional ones are aiming at a 'moving target'. Also conventional technologies can learn, and this aspect makes it much more difficult for new sustainable technologies to penetrate the market in the model. By using a Monte Carlo approach uncertainties in important learning parameters could be analysed. It appeared for instance that the main factor that determines the uncertainty on floor costs for photovoltaic (PV) energy production is the uncertainty in the PV progress ratio. One of the main targets of the SAPIENT project was to find ways to model the effect of R and D on technology learning. ECN has explored an approach to capture this effect by assuming a relationship between the R and D-intensity of a technology and its progress ratio. Following this approach it was found that uncertainties in the overall progress ratio are often higher than the effect additional R and D can have on a certain technology. Also, model outcomes depended rather on the carbon prices used in the scenarios than on the enhancement of learning by R and D. This suggests that a stimulus for sustainable technologies cannot be reached by R and D

  16. Post secondary project-based learning in science, technology, engineering and mathematics

    Directory of Open Access Journals (Sweden)

    Rachel A Ralph

    2016-03-01

    Full Text Available Project-based learning (PjBL - to distinguish from problem-based learning - PBL has become a recurrent practice in K-12 classroom environments. As PjBL has become prominent in K-12 classrooms, it has also surfaced in post-secondary institutions.  The purpose of this paper is to examine the research that has studied a variety of science, technology, engineering and mathematic subjects using PjBL in post-secondary classrooms. Eleven articles (including qualitative, quantitative and mixed methods were included.  The format includes: an introduction and background (which defines PjBL and STEM, research methods, quality appraisal used, results, and a discussion, future research and a conclusion.  Two tables and two figures are included. In this paper, theoretical backgrounds and key terms were identified, followed by a literature review discussing four themes: content knowledge, interdisciplinary skills, collaboration and skill development for future education and careers.  Results suggested that there is a positive connection between content knowledge learning and PjBL in collaborative settings.  Additionally, some negative perceptions arose regarding teamwork situations.  Interdisciplinary skills were achieved, but quite limited in post-secondary classrooms.  PjBL and STEM were perceived to be important for future education and careers.  Future research needs to be completed and institutional curriculum changes informed by the results of this research need to occur to further explore interdisciplinary courses and the use of PjBL.

  17. Didactic Content of Constructively-Projective Function of Students Learning: The Extrapolation in Information Technology

    Science.gov (United States)

    Kutuev, Ruslan A.; Nuriyeva, Elvira N.; Safiullina, Tatyana R.; Kryukova, Nina I.; Tagirova, Nataliya P.; Karpenko, Galina V.

    2016-01-01

    The relevance of the study is conditioned by a radical impact on the learning process of the university by information technology, which put start a new phase in its transformation. According to experts at the present time the main factor of efficiency of university's activity becomes the expansion of students' learning activities, realized on the…

  18. Internet Technology-Based Projects in Learning and Teaching English as a Foreign Language at Yakutsk State University

    Science.gov (United States)

    Zamorshchikova, Lena; Egorova, Olga; Popova, Marina

    2011-01-01

    This paper discusses recent uses of information and communication technologies (ICTs) in fostering Internet-based projects for learning English as a Foreign Language (EFL) at the Faculty of Foreign Languages in Yakutsk State University, Russia. It covers the authors' experiences integrating distance education and creating educational resources…

  19. Fostering Learner Autonomy in English for Science: A Collaborative Digital Video Project in a Technological Learning Environment

    Science.gov (United States)

    Hafner, Christoph A.; Miller, Lindsay

    2011-01-01

    This paper reports on the syllabus design and implementation of an English for Science and Technology (EST) course at an English-medium university in Hong Kong. The course combined elements of project-based learning and a "pedagogy for multiliteracies" (New London Group, 1996) to produce a strong learner autonomy focus. A major component…

  20. Policy implications of endogenous technological learning: some conclusions of the EU JOULE III project TEEM

    International Nuclear Information System (INIS)

    Kypreos, S.; Barreto, L.

    2000-01-01

    The TEEM (Energy Technology Dynamics and Advanced System Modelling) project focused activities on the role that technology and R and D spending could play for the mitigation of climatic change. The primary objectives of the PSI team were to share experience with other model developers in Europe, to expand the modelling capabilities, to contribute to quantitative analyses on the diffusion of innovative technologies, and to gain insights on the public energy research and development strategies. The paper describes the main findings of some scenarios on CO 2 mitigation for the global electricity system based on analyses using the multi-regional version of the ERIS prototype model, developed during the project. (authors)

  1. Convergence of Information and Communication Technology (ICT) Tools in Project Based Learning (PBL)

    Science.gov (United States)

    Thamarasseri, Ismail

    2014-01-01

    Rapid technological advancement influences the communication and information management as well as knowledge construction. Within the context of new challenges, lifelong learning emerges a fundamental element for the constant development of professionals. So that it dynamically adapts to change and retain a state-of-the-art identity. At present,…

  2. Science Song Project: Integration of Science, Technology and Music to Learn Science and Process Skills

    Directory of Open Access Journals (Sweden)

    Jiyoon Yoon

    2017-07-01

    Full Text Available It has been critical to find a way for teachers to motivate their young children to learn science and improve science achievement. Since music has been used as a tool for educating young students, this study introduces the science song project to teacher candidates that contains science facts, concepts, laws and theories, and combines them with music for motivating their young children to learn science and improve science achievement. The purpose of the study is to determine the effect of the science song project on teacher candidates’ understanding of science processing skills and their attitudes toward science. The participants were 45 science teacher candidates who were enrolled in an EC-6 (Early Childhood through Grade 6 program in the teacher certification program at a racially diverse Texas public research university. To collect data, this study used two instruments: pre-and post-self efficacy tests before and after the science teacher candidates experienced the science song project and final reflective essay at the end of the semester. The results show that while developing their songs, the participating teacher candidates experienced a process for science practice, understood science concepts and facts, and positively improved attitudes toward science. This study suggests that the science song project is a science instruction offering rich experiences of process-based learning and positive attitudes toward science.

  3. A Pilot Project – From Illiteracy to Computer Literacy: Teaching and Learning Using Information Technology

    Directory of Open Access Journals (Sweden)

    Mohamad Adnan Al-Alaoui

    2008-09-01

    Full Text Available This paper addresses the use of information and communication technologies, ICT or IT for brevity, to combat illiteracy and move participants directly from illiteracy to computer literacy. The resulting assistive technology and instructional software and hardware can be employed to speed up literacy programs and make them more attractive and effective. The approach provides an interactive, self-paced, autonomous and entertaining learning experience, eases entry and exit in and out of the program, and permits monitoring and updating progress status. The hallmark of the proposed approach is the integration of speech and handwriting recognition, as well as audio and visual aids into the flow.

  4. Teacher Perception of Project-Based Learning in a Technology-Infused Secondary School Culture: A Critical Cine-Ethnographic Study

    Science.gov (United States)

    Gratch, Jonathan

    2012-01-01

    Project-based learning has long been used in the educational realm as it emphasis a student-centered strategy which promotes meaning, enriched learning that enhances inquiry and problem-solving skills in a rich, authentic environment. The relevance and authentic design of projects may further be enhanced by the use of technology in the classroom.…

  5. Sustainability Through Technology Licensing and Commercialization: Lessons Learned from the TRIAD Project.

    Science.gov (United States)

    Payne, Philip R O

    2014-01-01

    Ongoing transformation relative to the funding climate for healthcare research programs housed in academic and non-profit research organizations has led to a new (or renewed) emphasis on the pursuit of non-traditional sustainability models. This need is often particularly acute in the context of data management and sharing infrastructure that is developed under the auspices of such research initiatives. One option for achieving sustainability of such data management and sharing infrastructure is the pursuit of technology licensing and commercialization, in an effort to establish public-private or equivalent partnerships that sustain and even expand upon the development and dissemination of research-oriented data management and sharing technologies. However, the critical success factors for technology licensing and commercialization efforts are often unknown to individuals outside of the private sector, thus making this type of endeavor challenging to investigators in academic and non-profit settings. In response to such a gap in knowledge, this article will review a number of generalizable lessons learned from an effort undertaken at The Ohio State University to commercialize a prototypical research-oriented data management and sharing infrastructure, known as the Translational Research Informatics and Data Management (TRIAD) Grid. It is important to note that the specific emphasis of these lessons learned is on the early stages of moving a technology from the research setting into a private-sector entity and as such are particularly relevant to academic investigators interested in pursuing such activities.

  6. Technology Enhanced Learning

    NARCIS (Netherlands)

    Klemke, Roland; Specht, Marcus

    2013-01-01

    Klemke, R., & Specht, M. (2013, 26-27 September). Technology Enhanced Learning. Presentation at the fourth international conference on eLearning (eLearning 2013), Belgrade, Serbia. http://econference.metropolitan.ac.rs/

  7. Editorial: Advanced learning technologies

    Directory of Open Access Journals (Sweden)

    Yu-Ju Lan

    2012-03-01

    Full Text Available Recent rapid development of advanced information technology brings high expectations of its potential to improvement and innovations in learning. This special issue is devoted to using some of the emerging technologies issues related to the topic of education and knowledge sharing, involving several cutting edge research outcomes from recent advancement of learning technologies. Advanced learning technologies are the composition of various related technologies and concepts such as mobile technologies and social media towards learner centered learning. This editorial note provides an overview of relevant issues discussed in this special issue.

  8. Immersive Learning Technologies

    Science.gov (United States)

    2009-08-20

    Immersive Learning Technologies Mr. Peter Smith Lead, ADL Immersive Learning Team 08/20/2009 Report Documentation Page Form ApprovedOMB No. 0704...to 00-00-2009 4. TITLE AND SUBTITLE Immersive Learning Technologies 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR...unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Why Immersive Learning Technologies

  9. Low-Temperature Projects of the Department of Energy's Geothermal Technologies Program: Evaluation and Lessons Learned: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Tom; Snyder, Neil; Gosnold, Will

    2016-12-01

    This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful development today requires a good knowledge of geothermal system design and operation.

  10. Low-Temperature Projects of the Department of Energy's Geothermal Technologies Program: Evaluation and Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Tom; Snyder, Neil; Gosnold, Will

    2016-10-23

    This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful development today requires a good knowledge of geothermal system design and operation.

  11. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  12. Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

    Science.gov (United States)

    Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

    2015-01-01

    In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

  13. The readiness of teachers to integrate information and communication technology for learning in a selected school in the GautengOnline project.

    OpenAIRE

    2008-01-01

    This study is aimed at providing the reader with a detailed description of the readiness of teachers to integrate Information and Communication Technology (ICT) for learning in a selected school in the GautengOnline (GoL) Project, through qualitative research design that used various data collecting methods: Questionnaire, observations and interview. A large number of teachers showed some interest in using ICT learning but had difficulties on how to get started due to the lack of suitable ICT...

  14. Linking Project-Based Interdisciplinary Learning and Recommended Professional Competencies with Business Management, Digital Media, Distance Learning, Engineering Technology, and English

    Science.gov (United States)

    Bender, Melinda; Fulwider, Miles; Stemkoski, Michael J.

    2008-01-01

    This paper encourages the investigation of real world problems by students and faculty and links recommended student competencies with project based learning. In addition to the traditional course objectives, project-based learning (PBL) uses real world problems for classroom instruction and fieldwork to connect students, instructors, and industry…

  15. Technology: Student Animation Projects: An Avenue to Promote Creativity and Learning

    Science.gov (United States)

    Siegle, Del

    2014-01-01

    Using readily available technology, students of all ages can easily create impressive animated products. Animation allows educators to capitalize on the natural desire that students of all ages hold to tell stories and share their understanding of the world. In the course of planning their animations, students conduct research on topics, organize…

  16. Project Management Approaches for Online Learning Design

    Science.gov (United States)

    Eby, Gulsun; Yuzer, T. Volkan

    2013-01-01

    Developments in online learning and its design are areas that continue to grow in order to enhance students' learning environments and experiences. However, in the implementation of new technologies, the importance of properly and fairly overseeing these courses is often undervalued. "Project Management Approaches for Online Learning Design"…

  17. A learning curve approach to projecting cost and performance for photovoltaic technologies

    Science.gov (United States)

    Cody, George D.; Tiedje, Thomas

    1997-04-01

    The current cost of electricity generated by PV power is still extremely high with respect to power supplied by the utility grid, and there remain questions as to whether PV power can ever be competitive with electricity generated by fossil fuels. An objective approach to this important question was given in a previous paper by the authors which introduced analytical tools to define and project the technical/economic status of PV power from 1988 through the year 2010. In this paper, we apply these same tools to update the conclusions of our earlier study in the context of recent announcements by Amoco/Enron-Solarex of projected sales of PV power at rates significantly less than the US utility average.

  18. Learning curve approach to projecting cost and performance for photovoltaic technologies

    Science.gov (United States)

    Cody, George D.; Tiedje, Thomas

    1997-10-01

    The current cost of electricity generated by PV power is still extremely high with respect to power supplied by the utility grid, and there remain questions as to whether PV power can ever be competitive with electricity generated by fossil fuels. An objective approach to this important question was given in a previous paper by the authors which introduced analytical tools to define and project the technical/economic status of PV power from 1988 through the year 2010. In this paper, we apply these same tools to update the conclusions of our earlier study in the context of recent announcements by Amoco/Enron-Solar of projected sales of PV power at rates significantly less than the U.S. utility average.

  19. Enhancing learning with technology

    NARCIS (Netherlands)

    Specht, Marcus; Klemke, Roland

    2013-01-01

    Specht, M., & Klemke, R. (2013, 26-27 September). Enhancing Learning with Technology. In D. Milosevic (Ed.), Proceedings of the fourth international conference on eLearning (eLearning 2013) (pp. 37-45). Belgrade Metropolitan University, Belgrade, Serbia. http://econference.metropolitan.ac.rs/

  20. NASA Allstar Project Aeronautics Learning Laboratory for Science,Technology, and Research (Allstar)

    Science.gov (United States)

    Levy, Cesar; Ebadian M. A.

    1998-01-01

    converted to an on-line discussion forum with a unique section on Blacks in Aviation. Prime Technologies coordinated with NASA LARC and the Teacher Resource Centers (TRCs) for scale-up of ALLSTAR and performed live demonstrations of the software in schools and at conventions.

  1. Technology, Learning, and Individual Differences

    Science.gov (United States)

    Bear, Anne A. Ghost

    2012-01-01

    The learning needs for adults that result from the constant increase in technology are rooted in the adult learning concepts of (a) andragogy, (b) self-directed learning, (c) learning-how-to-learn, (d) real-life learning, and (e) learning strategies. This study described the learning strategies that adults use in learning to engage in an online…

  2. “Freedom from Jobs” or learning to love to labor? Diversity advocacy and working imaginaries in Open Technology Projects

    Directory of Open Access Journals (Sweden)

    Christina Dunbar-Hester

    2016-12-01

    Full Text Available This paper examines imaginaries of work and labor in “open technology” projects (especially open source software and hackerspaces, based on ethnographic research in North America. It zeroes in on “diversity initiatives” within open technology projects. These initiatives are important because they expose many of the assumptions and tensions that surround participatory cultures. On the one hand, these projects and spaces are organized around voluntarism; in theory, everyone who wishes to participate is welcome to do so. On the other hand, diversity initiatives form in order to address the “problem” of imbalance in the ranks of participants. Technology is a unique domain for the discharge of political energies. In collective imagination, it has been vested with the power to initiate change (even as this belief obscures the role of social and economic relations. Multiple ideas circulate about the relationships between diversity in open technology projects and paid labor. This paper argues that in part due to the legacy of technical hobbies as training grounds for technical employment for much of the twentieth century, as documented by historians of radio (Douglas, 1987; Haring, 2006, voluntaristic technology projects are vexed sites for imagining political emancipation. To a large degree, diversity initiatives in open technology projects are consistent with corporate values of diversity as a marketplace value.  At the same time, collectivity formations around technology that incorporate feminist, antiracist, or social justice framings may begin to generate connections between diversity advocacy in tech fields and social justice movements or policy changes in order to effect deep social change. 

  3. More Technology, Less Learning?

    Science.gov (United States)

    Kulesza, Justin; DeHondt, Gerald, II.; Nezlek, George

    2011-01-01

    Modern information technologies (presentation software, wireless laptop computers, cell phones, etc.) are purported to enhance student learning. Research to date provides an ambivalent and often conflicting set of outcomes about the effectiveness of such technologies in the context of the college classroom. Anecdotal evidence further complicates…

  4. Effects of a Technology Supported Project Based Learning (TS-PBL Approach on the Success of a Mobile Application Development Course and the Students’ Opinions

    Directory of Open Access Journals (Sweden)

    Fezile Ozdamli

    2017-05-01

    Full Text Available Similar to traditional desktop software development processes, teamwork is a necessity in the mobile application development process. Thus, the aim of this study is to examine the effects of the technology supported project-based learning approach in mobile application development courses on the academic achievement of students and to clarify the engineering students’ opinions. A total of 130 engineering students from the Department taking mobile application development courses were the participants of this study. The lessons progressed in one group in the form of technology supported project-based learning steps, while in the other group, they were conducted using traditional methods. Based on the results, the practical implementation of a mobile application with a TS-PBL approach in engineering students’ education will be discussed.

  5. Flexible Processes in Project-Centred Learning

    NARCIS (Netherlands)

    Ceri, Stefano; Matera, Maristella; Raffio, Alessandro; Spoelstra, Howard

    2007-01-01

    Ceri, S., Matera, M., Raffio, A. & Spoelstra, H. (2007). Flexible Processes in Project-Centred Learning. In E. Duval, R. Klamma, and M. Wolpers (Eds.), European Conference on Technology Enhanced Learning, Lecture Notes in Computer Science, Vol. 4753, pp. 463-468. Berlin Heidelberg: Springer-Verlag

  6. Financing Information Communication Technology Projects in Secondary Schools E-Learning: A Case of Mombasa County, Kenya

    Science.gov (United States)

    Wangila, Violet Muyoka

    2015-01-01

    Information communication and technology (ICTs) has become common place entities in all aspects of life. Within the education sector, ICT has begun to have a special attention although not extensively as in other fields both globally and locally. Limited funds still presents a challenge in rolling out the e-school projects in Kenyan secondary…

  7. Towards a Pragmatic Model for Group-Based, Technology-Mediated, Project-Oriented Learning - An Overview of the B2C Model

    Science.gov (United States)

    Lawlor, John; Conneely, Claire; Tangney, Brendan

    The poor assimilation of ICT in formal education is firmly rooted in models of learning prevalent in the classroom which are largely teacher-led, individualistic and reproductive, with little connection between theory and practice and poor linkages across the curriculum. A new model of classroom practice is required to allow for creativity, peer-learning, thematic learning, collaboration and problem solving, i.e. the skills commonly deemed necessary for the knowledge-based society of the 21st century. This paper describes the B2C model for group-based, technology-mediated, project-oriented learning which, while being developed as part of an out of school programme, offers a pragmatic alternative to traditional classroom pedagogy.

  8. Student Learning Projects in Electric Vehicle Engineering

    DEFF Research Database (Denmark)

    Ritchie, Ewen; Leban, Krisztina Monika

    2012-01-01

    This paper presents the didactic problem based learning method in general use at Aalborg University as applied to Electric Mobility. Advantage is taken of this method to link student learning to current research projects. This offers advantages to the students and the researchers. The paper...... introduces the subject, presents the research of the Department of Energy Technology and describes the relevant syllabus. It continues to present a range of titles of previous research linked student project projects, and to fill in some of the detail, an example of such a student project. The paper...

  9. Brentwood Lessons Learned Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Rivkin, Carl H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Caton, Melanie C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ainscough, Christopher D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcinkoski, Jason [Dept. of Energy (DOE), Washington DC (United States)

    2017-09-26

    The purpose of this report is to document lessons learned in the installation of the hydrogen fueling station at the National Park Service Brentwood site in Washington, D.C., to help further the deployment of hydrogen infrastructure required to support hydrogen and other fuel cell technologies. Hydrogen fueling is the most difficult infrastructure component to build and permit. Hydrogen fueling can include augmenting hydrogen fueling capability to existing conventional fuel fueling stations as well as building brand new hydrogen fueling stations. This report was produced as part of the Brentwood Lessons Learned project. The project consisted of transplanting an existing modular hydrogen fueling station from Connecticut to the National Park Service Brentwood site. This relocation required design and construction at the Brentwood site to accommodate the existing station design as well as installation and validation of the updated station. One of the most important lessons learned was that simply moving an existing modular station to an operating site was not necessarily straight-forward - performing the relocation required significant effort and cost. The station has to function at the selected operating site and this functionality requires a power supply, building supports connecting to an existing alarm system, electrical grounding and lighting, providing nitrogen for purging, and providing deionized water if an electrolyzer is part of the station package. Most importantly, the station has to fit into the existing site both spatially and operationally and not disrupt existing operations at the site. All of this coordination and integration requires logistical planning and project management. The idea that a hydrogen fueling station can be simply dropped onto a site and made immediately operational is generally not realistic. Other important lessons learned include that delineating the boundaries of the multiple jurisdictions that have authority over a project for

  10. Transformational Tools and Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Transformational Tools and Technologies (TTT) Project advances state-of-the-art computational and experimental tools and technologies that are vital to aviation...

  11. Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

    Science.gov (United States)

    2008-09-01

    Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

  12. Cascade Error Projection Learning Algorithm

    Science.gov (United States)

    Duong, T. A.; Stubberud, A. R.; Daud, T.

    1995-01-01

    A detailed mathematical analysis is presented for a new learning algorithm termed cascade error projection (CEP) and a general learning frame work. This frame work can be used to obtain the cascade correlation learning algorithm by choosing a particular set of parameters.

  13. Technology Education Professional Enhancement Project

    Science.gov (United States)

    Hughes, Thomas A., Jr.

    1996-01-01

    The two goals of this project are: the use of integrative field of aerospace technology to enhance the content and instruction delivered by math, science, and technology teachers through the development of a new publication entitled NASA Technology Today, and to develop a rationale and structure for the study of technology, which establishes the foundation for developing technology education standards and programs of the future.

  14. Managing Technology Projects

    Science.gov (United States)

    Booth, Char

    2009-01-01

    This will be my first time authoring this column, and I'm delighted to have the opportunity it presents to explore the intersection of library technology and public services. As the recent title of the 2008 Internet Librarian conference indicates, "Beyond Library 2.0: User-Focused Tools and Technologies," the tide of what for several years has…

  15. Theory in learning technology

    Directory of Open Access Journals (Sweden)

    Laura Czerniewicz

    2011-12-01

    Full Text Available This special issue is being published at a significant point in time in relation tosimultaneous changes in higher education, in technology and in the field of learningtechnology itself. As the 2011 ALT C conference themes clearly state, learningtechnology needs to learn to thrive in a colder and more challenging climate. In thisdifficult political and economic environment technological trends continue todevelop in terms of mobility, cloud computing, ubiquity and the emergence of whathas been called big data. E-learning has become mainstream and the field of learningtechnology itself is beginning to stabilise as a profession. Profession here isunderstood as a knowledge-based occupation and a form of cultural work where thetasks addressed are human problems amenable to expert advice and distinguishablefrom other kinds of work by the fact that it is underpinned by abstract knowledge(Macdonald, 1995.

  16. Readiness of Adults to Learn Using E-Learning, M-Learning and T-Learning Technologies

    Science.gov (United States)

    Vilkonis, Rytis; Bakanoviene, Tatjana; Turskiene, Sigita

    2013-01-01

    The article presents results of the empirical research revealing readiness of adults to participate in the lifelong learning process using e-learning, m-learning and t-learning technologies. The research has been carried out in the framework of the international project eBig3 aiming at development a new distance learning platform blending virtual…

  17. Force Projection Technology Overview

    Science.gov (United States)

    2011-08-12

    Technologies • Fuel Efficient Powertrain Lubricant • Nanotechnology for Fuels and Lubes • Water from Air • Water Reuse • In-line Water Monitoring...purification systems with new pretreatment, desalination and post treatment technologies. Payoff: • Reduces the logistical footprint associated with water...FY11 FY12 FY13 FY14 FY15 FY16 FY17 •Water From Air •Water Quality Monitoring •Water Reuse •Pre and Post Treatment • Desalination 6 5 5

  18. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  19. Prototyping Feedback for Technology Enhanced Learning

    DEFF Research Database (Denmark)

    Cojocaru, Dorian; Spikol, Daniel; Friesel, Anna

    2016-01-01

    secondary-level high school STEM learning environments to post-secondary level engineering classes and design studios. Given this experience and framework, the present paper provides a perspective on the importance of using such research experience and iterative prototyping in real learning environments......The development of new educational technologies, in the area of practical activities is the main aim of the FP7 PELARS project. As part of the constructivist learning scenarios, according to the project proposal, the development and evaluation of technology designs are envisaged, for analytic data...... generation for Science, Technology, Engineering and Mathematics (STEM) subjects, such as: technology solutions, infrastructure, activities, assessment, curricula, and classroom furniture and environment designs. Inside four EU national settings, three separate learning contexts are being dealt with – from...

  20. Learning and digital inclusion: the ELAMP project

    Directory of Open Access Journals (Sweden)

    Kate D'Arcy

    2012-12-01

    Full Text Available The Electronic Learning and Mobility Project (ELAMP was a nationally funded project by the Department for Children, Schools and Families, which ran from 2004 to 2010. The main aim of ELAMP was to improve the education of Traveller children, particularly highly mobile learners. ELAMP focussed upon the use of mobile technology and distance learning to support, enhance and extend young Travellers’ educational and vocational opportunities. This article will reflect upon the learning and technological experiences and opportunities that the ELAMP project provided for Traveller children, young people and their families. In doing so it will critically consider the value of information technology in working with Traveller communities and advancing their educational opportunities. Reviewing ELAMP work will also demonstrate how the use of mobile technology can improve educational outcomes and Traveller families’ digital inclusion. Now that the project has ended, this article will question why we are not using what we learnt from ELAMP to move forward. The author was a tutor on the project who also evaluated the Strand B, Wider Key Skills element of ELAMP for The University of Sheffield between 2008 and 2010, which is the main focus of this particular article.

  1. Fusion technology projects

    International Nuclear Information System (INIS)

    Elen, J.D.

    1985-11-01

    The current status of the European Fusion File project (EFF) is reviewed. Some new tools for the nuclear-data evaluation and the processing are discussed. A method description and users manual for the toroidal-geometry neutronic program system FURNACE has been published. Calculations with FURNACE have been started to obtain the effective tritium breeding ratio and the distribution of the nuclear heat for the 17 Li 83 Pb blanket in the NET II torus geometry. The results of several experiments are reported: tensile tests on vanadium alloy V5%Ti doped with boron; creep embrittlement of stainless steel type 316; critical current test of a composite niobium-tin superconductor

  2. Photonics: Technology project summary

    Science.gov (United States)

    Depaula, Ramon P.

    1991-01-01

    Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

  3. A snapshot of research in learning technology

    Directory of Open Access Journals (Sweden)

    Rhona Sharpe

    2010-12-01

    Full Text Available The papers in this issue present a convenient snapshot of current research in learning technology, both in their coverage of the issues that concern us and the methods that are being used to investigate them. This issue shows that e-learning researchers are interested in: what technologies are available and explorations of their potential (Nie et al. explore the role of podcasting, how to design technology-mediated learning activities in ways which support specific learning outcomes (Simpson evaluates the role of ‘book raps' in supporting critical thinking, the identification of critical success factors in implementations (Cochrane's observation of three mobile learning projects and how such e-learning initiatives can be sustained within an institutional context (Gunn's examination of the challenges of embedding ‘grass roots' initiatives. Finally e-learning research is concerned with investigating the impact of emerging technologies on education – in this case Traxler's discussion of mobile, largely student-owned, devices. Together these five papers demonstrate the scope of research in learning technology and it is with this in mind that we will soon be referring to this journal by its subtitle: Research in Learning Technology.

  4. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning......Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem...

  5. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...... activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem......Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...

  6. Multi-Role Project (MRP): A New Project-Based Learning Method for STEM

    Science.gov (United States)

    Warin, Bruno; Talbi, Omar; Kolski, Christophe; Hoogstoel, Frédéric

    2016-01-01

    This paper presents the "Multi-Role Project" method (MRP), a broadly applicable project-based learning method, and describes its implementation and evaluation in the context of a Science, Technology, Engineering, and Mathematics (STEM) course. The MRP method is designed around a meta-principle that considers the project learning activity…

  7. Mobile and ubiquitous learning technologies

    NARCIS (Netherlands)

    Specht, Marcus

    2012-01-01

    Specht, M. (2012, 22 November). Mobile and ubiquitous learning technologies. Presentation given at the Workshop "Blended Learning an Hochschulen" at the Fakultätentag Informatik at the Universität Jena, Jena, Germany.

  8. Project Choice: Lessons Learned.

    Science.gov (United States)

    Ewing Marion Kauffman Foundation, Kansas City, MO.

    Project Choice began with a simple goal: to increase the number of inner-city students who graduate from high school on time and become productive members of society. To that end, Ewing M. Kauffman, his Foundation, and associates designed and implemented a program that promised postsecondary education or training to some students in the Kansas…

  9. Technology-Enhanced Learning @ CELSTEC: Ausgangslage, Entwicklung und Trends

    NARCIS (Netherlands)

    Klemke, Roland

    2011-01-01

    Klemke, R. (2011). Technology-Enhanced Learning @ CELSTEC: Ausgangslage, Entwicklung und Trends. Presentation given to visitors from Currenta GmbH in the Learning Media Lab. February, 15, 2011, Heerlen, Netherlands. ICoper-project.

  10. Hydrogen technologies and the technology learning curve

    International Nuclear Information System (INIS)

    Rogner, H.-H.

    1998-01-01

    On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

  11. Weight-loss study in African-American Women: lessons learned from project take HEED and future, technologically enhanced directions.

    Science.gov (United States)

    Murphy, Pamala J; Williams, Roger L

    2013-01-01

    African-American women are more overweight and have greater difficulty maintaining weight loss than do Caucasian women. Evidence suggests that African-American women are more successful with culturally tailored weight-loss programs. Begun in 2005, an 18-month randomized clinical trial, Project Take HEED (Healthy Eating and Exercise Decisions), culturally adapted an evidence-based dietary approach and exercise program to fit the female African-American population in an attempt to improve program attrition rates. The study was conducted with 223 African-American women (120 women in the experimental group; 103 controls), age 35 to 65 years, with a body mass index of 30 kg/m(2) or higher. The experimental group received education and instruction at 24 group sessions and were asked to record their daily food intake and physical activity. Cultural adaptation included social and spiritual components. Controls received usual care (referral to a dietitian). After 18 months, Project Take HEED demonstrated the following outcomes: ATTRITION: the treatment group consisted of 12 African-American women at the end of month 18-(an attrition rate of 87%). (It had been 70% at the end of month 15.)FACTORS CONTRIBUTING TO ATTRITION INCLUDED: caregiver responsibilities, transportation difficulties, work schedules, and others. Those clients that did remain, however, provided the impetus for our next study. The remaining participants had, by and large, begun the study as being low in self-efficacy regarding weight loss and weight loss maintenance. Initial Findings: The high self-efficacy that some women had at the beginning of the intervention did not translate into the desired behavior change. The inverse relationship seen in this study suggests that treatments that improve participants' self-efficacy may result in greater weight loss. New Directions: A new study, commencing in 2013, will use at-home Web-based and virtual reality technology (avatars) in an attempt to enhance client

  12. Workshop on Learning Technology for Education in Cloud

    CERN Document Server

    Rodríguez, Emilio; Santana, Juan; Prieta, Fernando

    2012-01-01

    Learning Technology for Education in Cloud investigates how cloud computing can be used to design applications to support real time on demand learning using technologies. The workshop proceedings provide opportunities for delegates to discuss the latest research in TEL (Technology Enhanced Learning) and its impacts for learners and institutions, using cloud.   The Workshop on Learning Technology for Education in Cloud (LTEC '12) is a forum where researchers, educators and practitioners came together to discuss ideas, projects and lessons learned related to the use of learning technology in cloud, on the 11th-13th July at Salamanca in Spain.

  13. Project Learning and Virtual Collaboration

    DEFF Research Database (Denmark)

    Fibiger, Bo; Nielsen, Janni; Sorensen, Elsebeth

    2005-01-01

    to the modularity and flexibility that characterize the study and allow admission of part-time students, full-time students and students who only sign up for one accredited module. The methodology will be illustrated through empirical snapshots from selected modules in the start-up phase, and the focus...... will be directed towards problems experienced by the students. From an analytical perspective, the paper will identify and discuss fundamental problems related to the organization, flexibility, and implementation of project pedagogy online. MIL is organized around ICT and Learning and the study theme focuses...... on ICT and Learning. In addition, MIL provides a learning space where practice is under constant negotiation and reconstruction as an inherent, integrated part of the learning process. Consequently, we argue that MIL may be seen as an example of best practice in blended learning....

  14. Online Learning for Mobile Technology Applications in Health Surveys

    International Development Research Centre (IDRC) Digital Library (Canada)

    Online Learning for Mobile Technology Applications in Health Surveys. In light of ... to develop a globally accessible asynchronous Internet-based training packaged backed by a real-time coaching service. Project ID. 105932. Project status.

  15. Canadian fusion fuels technology project

    International Nuclear Information System (INIS)

    1986-01-01

    The Canadian Fusion Fuels Technology Project was launched in 1982 to coordinate Canada's provision of fusion fuels technology to international fusion power development programs. The project has a mandate to extend and adapt existing Canadian tritium technologies for use in international fusion power development programs. 1985-86 represents the fourth year of the first five-year term of the Canadian Fusion Fuels Technology Project (CFFTP). This reporting period coincides with an increasing trend in global fusion R and D to direct more effort towards the management of tritium. This has resulted in an increased linking of CFFTP activities and objectives with those of facilities abroad. In this way there has been a continuing achievement resulting from CFFTP efforts to have cooperative R and D and service activities with organizations abroad. All of this is aided by the cooperative international atmosphere within the fusion community. This report summarizes our past year and provides some highlights of the upcoming year 1986/87, which is the final year of the first five-year phase of the program. AECL (representing the Federal Government), the Ministry of Energy (representing Ontario) and Ontario Hydro, have given formal indication of their intent to continue with a second five-year program. Plans for the second phase will continue to emphasize tritium technology and remote handling

  16. The Revolutionary Vertical Lift Technology (RVLT) Project

    Science.gov (United States)

    Yamauchi, Gloria K.

    2018-01-01

    The Revolutionary Vertical Lift Technology (RVLT) Project is one of six projects in the Advanced Air Vehicles Program (AAVP) of the NASA Aeronautics Research Mission Directorate. The overarching goal of the RVLT Project is to develop and validate tools, technologies, and concepts to overcome key barriers for vertical lift vehicles. The project vision is to enable the next generation of vertical lift vehicles with aggressive goals for efficiency, noise, and emissions, to expand current capabilities and develop new commercial markets. The RVLT Project invests in technologies that support conventional, non-conventional, and emerging vertical-lift aircraft in the very light to heavy vehicle classes. Research areas include acoustic, aeromechanics, drive systems, engines, icing, hybrid-electric systems, impact dynamics, experimental techniques, computational methods, and conceptual design. The project research is executed at NASA Ames, Glenn, and Langley Research Centers; the research extensively leverages partnerships with the US Army, the Federal Aviation Administration, industry, and academia. The primary facilities used by the project for testing of vertical-lift technologies include the 14- by 22-Ft Wind Tunnel, Icing Research Tunnel, National Full-Scale Aerodynamics Complex, 7- by 10-Ft Wind Tunnel, Rotor Test Cell, Landing and Impact Research facility, Compressor Test Facility, Drive System Test Facilities, Transonic Turbine Blade Cascade Facility, Vertical Motion Simulator, Mobile Acoustic Facility, Exterior Effects Synthesis and Simulation Lab, and the NASA Advanced Supercomputing Complex. To learn more about the RVLT Project, please stop by booth #1004 or visit their website at https://www.nasa.gov/aeroresearch/programs/aavp/rvlt.

  17. Multimedia and Technology in Learning

    Science.gov (United States)

    Mantiri, Franky

    2014-01-01

    This essay explores the use of computer technology and multimedia in students learning. Undoubtedly, the advent of computer technology has changed the way humans learn and do things. Moreover, "Computer has become standard equipment" (Bitter & Pierson, 2002) in everyday life. The ability to process data in a real time has helped…

  18. Project Mechanisms and Technology Diffusion in Climate Policy - Kyoto project mechanisms and technology diffusion

    International Nuclear Information System (INIS)

    Glachant, M.; Meniere, Y.

    2010-01-01

    The paper deals with the diffusion of GHG mitigation technologies in developing countries. We develop a model where an abatement technology is progressively adopted by firms and we use it to compare the Clean Development Mechanism (CDM) with a standard Cap and Trade scheme (C and T). In the presence of learning spillovers, we show that the CDM yields a higher social welfare than C and T if the first adopter receives CDM credits whereas the followers do not. This result lends support to the policy proposal of relaxing the CDM additionality constraint for projects which generate significant learning externalities. (authors)

  19. Assuring Best Practice in Technology-Enhanced Learning Environments

    Science.gov (United States)

    Keppell, Mike; Suddaby, Gordon; Hard, Natasha

    2015-01-01

    This paper documents the development and findings of the Good Practice Report on Technology-Enhanced Learning and Teaching funded by the Australian Learning and Teaching Council (ALTC). Developing the Good Practice Report required a meta-analysis of 33 ALTC learning and teaching projects relating to technology funded between 2006 and 2010. This…

  20. Technology Transfer Bottlenecks and Lessons Learned in Humanitarian Demining EU-funded Research: Analysis and Results from the EC DELVE Project

    International Nuclear Information System (INIS)

    Bruschini, C.; Sahli, H.; Van Kempen, L.; Schleijpen, R.; Breejen, E. den

    2010-01-01

    The EC DELVE Support Action (www.delve.vub.ac.be) has analyzed the bottlenecks in the transfer of Humanitarian Demining (HD) technology from technology development to the use in the field, basing itself on the assessment of the European HD Research and Technology Development (RTD) situation from early 1990 until 2006. The developments in HD during the last 10 years underline the fact that in a number of cases demining related developments have been terminated or at least put on hold. A number of lessons learned were drawn, bottlenecks identified and broadly classified as either Confidence, Cost, or Communication related. The study also showed that the funding provided by the European Commission (EC) has led directly to the creation of an extensive portfolio of HD technology development projects. However, the range of instruments available to the EC to finance the necessary R and D was limited to pre-competitive research. The EC had no tools or programs to fund actual product development. The corresponding consequences are detailed in the study. The separation of the Mine Action and RTD funding streams in the EC did also negatively affect the take-up of new technologies. As a main conclusion, creating coherence between: (1) the EC policy based on political decisions, (2) RTD, testing and industrialization of equipment, and (3) timely deployment, requires a new way of coordinated thinking: 'end-to-end planning' has to be supported by a well organized and coordinated organizational structure involving different DGs (Directorate General) and even extending beyond the EU. This was not the case for Mine Action. (author)

  1. Scaffolding Project-Based Learning with the Project Management Body of Knowledge (PMBOK[R])

    Science.gov (United States)

    van Rooij, Shahron Williams

    2009-01-01

    This paper reports the results of a study of the extent to which processes and procedures from the discipline of project management can scaffold online project-based learning in a graduate-level instructional technology course, by facilitating intra-team interaction, enhancing project outcomes and promoting a positive project team experience. With…

  2. Assessment of Project-Based Learning in a MECHATRONICS Context

    Science.gov (United States)

    Doppelt, Yaron

    2005-01-01

    Project-based learning (PBL) that has authenticity in the pupils' world enables the teaching of science and technology to pupils from a variety of backgrounds. PBL has the potential to enable pupils to research, plan, design, and reflect on the creation of technological projects (Doppelt, 2000). Engineering education, which is common in Israel,…

  3. Everyday complexities and sociomaterialities of learning, technology, affects and effects

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    design with particular intended educational purposes (e.g. educational technology and technology education), the everyday complexities and sociomaterialities of learning and technology intermingles with how students/professionals become affected by digital technology and hence also which matters......This paper starts out with the challenge of establishing and researching relationships between educational design, digital technology and professional learning. The paper is empirical and takes point of departure in case examples from two development projects with a focus on professional education....... Both projects focus on new waysto build relationships between digital technologies, professional education and learning. Each project takes a different take on how to approach and position digital technology and it’s relationships with the educational programs and students’ learning. Project Wellfare...

  4. Project approach helps technology transfer

    International Nuclear Information System (INIS)

    Walcher, M.W.

    1982-01-01

    The placing of the contract by the National Power Corporation with Westinghouse for the Philippines nuclear power plant (PNPP-1) is described. Maximised use of Philippine contractors under Westinghouse supervision was provided for. Technology transfer is an important benefit of the contract arrangements, since National Power Corporation project management acquires considerable nuclear plant experience during plant construction through consultation with technical personnel. (U.K.)

  5. Students' Engagement with Learning Technologies

    Science.gov (United States)

    Larkin, Derek; Huett, Kim C.

    2013-01-01

    This paper seeks to add to the discussion surrounding young adults' relationship and engagement with learning technologies, exploring whether they naturally engage with these technologies when the use of them is either compulsory or optional. We discuss our findings in relation to whether young people are truly engaging with technologies or…

  6. Learning by Playing with Digital Technology

    DEFF Research Database (Denmark)

    Benjaminsen, Nana

    2006-01-01

    This paper presupposes the notion that there is potential for the integration of play into primary and secondary school activities, because it can stimulate and support the formal as well as informal learning that takes place in school. Digital technology could be a driver for this integration...... Construction Games in Schools. The project is an exploration of how elements of play can be integrated in a technology-based learning environment. I will use examples of empirical data gathered during spring 2006 to demonstrate that play can function as a useful learning strategy, and also point out barriers......, because many of children's play activities already takes place on, and through, digital platforms. The focus for this paper is on how playorientated environmental qualities can be used and might change the current school structure. The background for the paper is the PhD project entitled Computer based...

  7. Technology for Education and Learning

    CERN Document Server

    2012 international conference on Technology for Education and Learning (ICTEL 2012)

    2012-01-01

    This volume contains 108 selected papers presented at the 2012 international conference on Technology for Education and Learning (ICTEL 2012), Macau, China, March 1-2, 2012. The conference brought together researchers working in various different areas of Technology for Education and Learning with a main emphasis on technology for business and economy in order to foster international collaborations and exchange of new ideas. This proceedings book has its focus on Technology for Economy, Finance and Education representing some of the major subareas presented at the conference.

  8. Machine learning for healthcare technologies

    CERN Document Server

    Clifton, David A

    2016-01-01

    This book brings together chapters on the state-of-the-art in machine learning (ML) as it applies to the development of patient-centred technologies, with a special emphasis on 'big data' and mobile data.

  9. Learning in Strategic Technology Alliances

    OpenAIRE

    SCHOENMAKERS, Wilfred; DUYSTERS, Geert

    2003-01-01

    In this paper we examine the influence of strategic technology alliances on organisational learning. From an empirical perspective we examined the pre- and post- alliance knowledge bases of allying firms. We found that the pre- alliance knowledge base overlap of the allying firms has an inverted U-shaped relationship with the degree of learning taking place in the alliance. Alliances established for the purpose of learning also show a significantly greater increase in knowledge base overlap f...

  10. Language Technologies for Lifelong Learning

    NARCIS (Netherlands)

    Greller, Wolfgang

    2011-01-01

    Greller, W. (2010). Language Technologies for Lifelong Learning. In S. Trausan-Matu & P. Dessus (Eds.), Proceedings of the Natural Language Processing in Support of Learning: Metrics, Feedback and Connectivity. Second Internationl Workshop - NLPSL 2010 (pp. 6-8). September, 14, 2010, Bucharest,

  11. Information Technologies and Workplace Learning.

    Science.gov (United States)

    Roth, Gene L.

    1995-01-01

    Information technologies are important tools for individual, team, and organizational learning. Developments in virtual reality and the Internet, performance support systems that increase the efficiency of individuals and groups, and other innovations have the potential to enhance the relationship between work and learning. (SK)

  12. Project organized Problem-based learning in Distance Education

    DEFF Research Database (Denmark)

    Jensen, Lars Peter; Helbo, Jan; Knudsen, Morten

    2002-01-01

    Project organized problem based learning is a successful concept for on-campus engineering education at Aalborg University. Recently this "Aalborg concept" has been used in networked distance education as well. This paper describes the experiences from two years of Internet-mediated project work...... in a new Master of Information Technology education. The main conclusions are, that the project work is a strong learning motivator, enhancing peer collaboration, for off-campus students as well. However, the concept cannot be directly transferred to off-campus learning. In this paper, the main problems...... experienced with group organized project work in distance education are described, and some possible solutions are listed....

  13. Project-Organized Problem-Based Learning in Distance Education

    DEFF Research Database (Denmark)

    Jensen, Lars Peter; Helbo, Jan; Knudsen, Morten

    2003-01-01

    Project organized problem based learning is a successful concept for on-campus engineering education at Aalborg University. Recently this "Aalborg concept" has been used in networked distance education as well. This paper describes the experiences from two years of Internet-mediated project work...... in a new Master of Information Technology education. The main conclusions are, that the project work is a strong learning motivator, enhancing peer collaboration, for off-campus students as well. However, the concept cannot be directly transferred to off-campus learning. In this paper, the main problems...... experienced with group organized project work in distance education are described, and some possible solutions are listed....

  14. Shippingport station decommissioning project technology transfer program

    International Nuclear Information System (INIS)

    McKernan, M.L.

    1989-01-01

    The US Department of Energy (DOE) Shippingport Station Decommissioning Project (SSDP) decontaminated and dismantled the world's first nuclear-fueled, commercial-size electric power plant. The SSDP programmatic goal direction for technology transfer is documentation of project management and operations experience. The objective is to provide future nuclear facility decommissioning projects with pertinent SSDP performance data for project assessment, planning, and operational implementation. This paper sets out access and availability directions for SSDP technology acquisition. Discusses are technology transfer definition; technology transfer products including topical and other project reports, professional-technical society presentations, other project liaison and media relations, visual documentation, and technology transfer data base; and retrieving SSDP information

  15. How does technological regime affect performance of technology development projects?

    NARCIS (Netherlands)

    Song, Michael; Hooshangi, Soheil; Zhao, Y. Lisa; Halman, Johannes I.M.

    2014-01-01

    In this study, we examine how technological regime affects the performance of technology development projects (i.e., project quality, sales, and profit). Technological regime is defined as the set of attributes of a technological environment where the innovative activities of firms take place.

  16. ICT in Problem- and Project-based Learning

    DEFF Research Database (Denmark)

    Andreasen, Lars Birch; Lerche Nielsen, Jørgen

    2012-01-01

    The paper discusses how teaching and learning practices at universities can implement new information technologies, inspired by the traditions of problem- and project-based learning. The changing roles in the teacher-student relationship, and students’ development of information literacy are disc...

  17. Learning English While Exploring the National Cultural Heritage: Technology-Assisted Project-Based Language Learning in an Upper-Secondary School

    Science.gov (United States)

    Pitura, Joanna; Berlinska-Kopec, Monika

    2018-01-01

    The quality and content of English language courses offered in secondary schools require special attention as they affect many students who learn English as one of their school subjects. Despite curricular provisions prescribing balanced development of language competence and a number of so-called "key competences", class work in Polish…

  18. Shippingport station decommissioning project technology transfer program

    International Nuclear Information System (INIS)

    McKernan, M.L.

    1988-01-01

    US Department of Energy (DOE) Shippingport Station Decommissioning Project (SSDP) decommissioned, decontaminated, and dismantled the world's first, nuclear fueled, commercial size, electric power plant. SSDP programmatic goal direction for technology transfer is documentation of project management and operations experience. Objective is to provide future nuclear facility decommissioning projects with pertinent SSDP performance data for project assessment, planning, and operational implementation. This paper presents a working definition for technology transfer. Direction is provided for access and availability for SSDP technology acquisition

  19. Organisational Learning with Technology

    DEFF Research Database (Denmark)

    Hundebøl, Jesper

    Based on multi-site ethno-methodological field studies in the Danish construction industry this paper examines the relational effects of 3D object-based modelling. In describing how that technology is being introduced, shaped and enacted, how it associates with, mediates and translates existing...... practices, I discuss how it has effects for work methods and routines in an (inter-)organisational setting, namely that of architects and consulting engineers. The technology is introduced in the practices in question, in part because of a program referred to as Det Digitale Byggeri (Digital Construction...

  20. Educational integrating projects as a method of interactive learning

    Directory of Open Access Journals (Sweden)

    Иван Николаевич Куринин

    2013-12-01

    Full Text Available The article describes a method of interactive learning based on educational integrating projects. Some examples of content of such projects for the disciplines related to the study of information and Internet technologies and their application in management are presented.

  1. Innovation in Construction: Learning Processes in implementing new Technologies

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is concerned with the question: How do construction firms implement new technology on construction projects? A model of the implementation process is presented based on a review of the construction innovation literature, innovation theory, and organisational learning theories....

  2. Organisational Learning with Technology

    DEFF Research Database (Denmark)

    Hundebøl, Jesper

    Based on multi-site ethno-methodological field studies in the Danish construction industry this paper examines the relational effects of 3D object-based modelling. In describing how that technology is being introduced, shaped and enacted, how it associates with, mediates and translates existing...... practices, I discuss how it has effects for work methods and routines in an (inter-)organisational setting, namely that of architects and consulting engineers. The technology is introduced in the practices in question, in part because of a program referred to as Det Digitale Byggeri (Digital Construction......). Among others, the program demands that architects and consulting engineers embrace a new breed of computer-based software programs allowing for 3D object-based modelling. In this paper I will describe the program and the network of (non-)human actors engaged in the promotion hereof with a view...

  3. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    The didactics, technology, and organization of an ICT supported distance engineering Master education are described. A systematic monitoring and evaluation of the basis year has given useful experience, subsequently used for adjustments and improvements. A successful on-campus project organized...... as asynchronous, which is possible with extensive utilization of new information and communication technology. Virtual meetings are conducted with text, sound and video based communication. Also the organization requires technology. A new learning management system, specifically designed to the didactic form...

  4. Project Management in Real Time: A Service-Learning Project

    Science.gov (United States)

    Larson, Erik; Drexler, John A., Jr.

    2010-01-01

    This article describes a service-learning assignment for a project management course. It is designed to facilitate hands-on student learning of both the technical and the interpersonal aspects of project management, and it involves student engagement with real customers and real stakeholders in the creation of real events with real outcomes. As…

  5. Scheduling projects with multiskill learning effect.

    Science.gov (United States)

    Zha, Hong; Zhang, Lianying

    2014-01-01

    We investigate the project scheduling problem with multiskill learning effect. A new model is proposed to deal with the problem, where both autonomous and induced learning are considered. In order to obtain the optimal solution, a genetic algorithm with specific encoding and decoding schemes is introduced. A numerical example is used to illustrate the proposed model. The computational results show that the learning effect cannot be neglected in project scheduling. By means of determining the level of induced learning, the project manager can balance the project makespan with total cost.

  6. How Technology Matters to Learning

    Science.gov (United States)

    Ehrmann, Stephen C.

    2013-01-01

    Did technology make a difference, for good or ill, in students' learning of economics in the three courses described in Dan Berrett's story, first published in the "Chronicle of Higher Education" and reprinted in this issue? That's the question that "Liberal Education" has asked this author to discuss. By…

  7. Learning in strategic technology alliances

    NARCIS (Netherlands)

    Schoenmakers, W.W.M.E.; Duysters, G.M.

    2006-01-01

    In this paper we examine the influence of strategic technology alliances on organisational learning. From an empirical perspective we examine the pre- and post-alliance knowledge bases of allying firms. We find that the pre-alliance knowledge base overlap of the allying firms has an inverted

  8. ITER project and fusion technology

    International Nuclear Information System (INIS)

    Takatsu, H.

    2011-01-01

    In the sessions of ITR, FTP and SEE of the 23rd IAEA Fusion Energy Conference, 159 papers were presented in total, highlighted by the remarkable progress of the ITER project: ITER baseline has been established and procurement activities have been started as planned with a target of realizing the first plasma in 2019; ITER physics basis is sound and operation scenarios and operational issues have been extensively studied in close collaboration with the worldwide physics community; the test blanket module programme has been incorporated into the ITER programme and extensive R and D works are ongoing in the member countries with a view to delivering their own modules in a timely manner according to the ITER master schedule. Good progress was also reported in the areas of a variety of complementary activities to DEMO, including Broader Approach activities and long-term technology. This paper summarizes the highlights of the papers presented in the ITR, FTP and SEE sessions with a minimum set of background information.

  9. Project KEWL: Kinect Engineering With Learning

    Science.gov (United States)

    Norris, Jeff; Goza, Sharon; Shores, David

    2011-01-01

    Project KEWL is a joint project between NASA/JPL and NASA/JSC to stimulate interest of children in Science, Technology, Engineering and Math (STEM) and bring the NASA space exploration experience to the classroom, museum and ultimately the living room. Using the Kinect game controller KEWL allows children to engage in NASA s missions in a fundamentally new way. KEWL allows children to experiment with gravity on Mars and the Moon; navigate through the International Space Station; fix a torn solar array on the ISS; drive a robot on Mars; visit an Asteroid; learn about the differences in gravity on different planets and control Robonaut 2 using their body as the input device. Project KEWL complements NASA s outreach investments in television, mobile platforms and the web by engaging the public through the rapidly expanding medium of console gaming. In 2008, 97% of teenagers played video games and 86% played on a home gaming console. (source: http://pewresearch.org/pubs/953/) As of March 2011, there have been more than 10 million Kinects sold. (source: http://www.itproportal.com/2011/03/10/kinect-record-breaking-sales-figures-top-10-million/) Project KEWL interacts with children on a platform on which they spend much of their time and teaches them information about NASA while they are having fun. Project KEWL progressed from completely custom C++ code written in house to using a commercial game engine. The art work and 3D geometry models come from existing engineering work or are created by the KEWL development team. Six different KEWL applications have been demonstrated at nine different venues including schools, museums, conferences, and NASA outreach events. These demonstrations have allowed the developers the chance to interact with players and observe the gameplay mechanics in action. The lessons learned were then incorporated into the subsequent versions of the applications.

  10. XML technology planning database : lessons learned

    Science.gov (United States)

    Some, Raphael R.; Neff, Jon M.

    2005-01-01

    A hierarchical Extensible Markup Language(XML) database called XCALIBR (XML Analysis LIBRary) has been developed by Millennium Program to assist in technology investment (ROI) analysis and technology Language Capability the New return on portfolio optimization. The database contains mission requirements and technology capabilities, which are related by use of an XML dictionary. The XML dictionary codifies a standardized taxonomy for space missions, systems, subsystems and technologies. In addition to being used for ROI analysis, the database is being examined for use in project planning, tracking and documentation. During the past year, the database has moved from development into alpha testing. This paper describes the lessons learned during construction and testing of the prototype database and the motivation for moving from an XML taxonomy to a standard XML-based ontology.

  11. Smart Gun Technology project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-05-01

    The goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user form firing a law officer`s firearm by implementing user-recognizing-and-authorizing (or {open_quotes}smart{close_quotes}) surety technologies. This project was funded by the National Institute of Justice. This report lists the findings and results of the project`s three primary objectives. First, to find and document the requirements for a smart firearm technology that law enforcement officers will value. Second, to investigate, evaluate, and prioritize technologies that meet the requirements for a law enforcement officer`s smart firearm. Third, to demonstrate and document the most promising technology`s usefulness in models of a smart firearm.

  12. Case-Based Learning, Pedagogical Innovation, and Semantic Web Technologies

    Science.gov (United States)

    Martinez-Garcia, A.; Morris, S.; Tscholl, M.; Tracy, F.; Carmichael, P.

    2012-01-01

    This paper explores the potential of Semantic Web technologies to support teaching and learning in a variety of higher education settings in which some form of case-based learning is the pedagogy of choice. It draws on the empirical work of a major three year research and development project in the United Kingdom: "Ensemble: Semantic…

  13. Composing with New Technology: Teacher Reflections on Learning Digital Video

    Science.gov (United States)

    Bruce, David L.; Chiu, Ming Ming

    2015-01-01

    This study explores teachers' reflections on their learning to compose with new technologies in the context of teacher education and/or teacher professional development. English language arts (ELA) teachers (n = 240) in 15 courses learned to use digital video (DV), completed at least one DV group project, and responded to open-ended survey…

  14. Pilot project of atomic energy technology record

    International Nuclear Information System (INIS)

    Song, K. C.; Kim, Y. I.; Kim, Y. G.

    2011-12-01

    Project of the Atomic Energy Technology Record is the project that summarizes and records in each category as a whole summary from the background to the performance at all fields of nuclear science technology which researched and developed at KAERI. This project includes Data and Document Management System(DDMS) that will be the system to collect, organize and preserve various records occurred in each research and development process. To achieve these goals, many problems should be solved to establish technology records process, such as issues about investigation status of technology records in KAERI, understanding and collection records, set-up project system and selection target field, definition standards and range of target records. This is a research report on the arrangement of research contents and results about pilot project which records whole nuclear technology researched and developed at KAERI in each category. Section 2 summarizes the overview of this pilot project and the current status of technology records in domestic and overseas, and from Section 3 to Section 6 summarize contents and results which performed in this project. Section 3 summarizes making TOC(Table of Content) and technology records, Section 4 summarizes sectoral templates, Section 5 summarizes writing detailed plan of technology records, and Section 6 summarizes Standard Document Numbering System(SDNS). Conclusions of this report are described in Section 7

  15. Software Engineering Team Project - lessons learned

    Directory of Open Access Journals (Sweden)

    Bogumiła Hnatkowska

    2013-06-01

    Full Text Available In the 2010/11 academic year the Institute of Informatics at Wroclaw University of Technology issued ’Software Engineering Team Project’ as a course being a part of the final exam to earn bachelor’s degree. The main assumption about the course was that it should simulate the real environment (a virtual IT company for its participants. The course was aimed to introduce issues regarding programming in the medium scale, project planning and management. It was a real challenge as the course was offered for more than 140 students. The number of staff members involved in its preparation and performance was more than 15. The paper presents the lessons learned from the first course edition as well as more detailed qualitative and quantitative course assessment.

  16. Technological learning in bioenergy systems

    International Nuclear Information System (INIS)

    Junginger, Martin; Visser, Erika de; Hjort-Gregersen, Kurt; Koornneef, Joris; Raven, Rob; Faaij, Andre; Turkenburg, Wim

    2006-01-01

    The main goal of this article is to determine whether cost reductions in different bioenergy systems can be quantified using the experience curve approach, and how specific issues (arising from the complexity of biomass energy systems) can be addressed. This is pursued by case studies on biofuelled combined heat and power (CHP) plants in Sweden, global development of fluidized bed boilers and Danish biogas plants. As secondary goal, the aim is to identify learning mechanisms behind technology development and cost reduction for the biomass energy systems investigated. The case studies reveal large difficulties to devise empirical experience curves for investment costs of biomass-fuelled power plants. To some extent, this is due to lack of (detailed) data. The main reason, however, are varying plant costs due to differences in scale, fuel type, plant layout, region etc. For fluidized bed boiler plants built on a global level, progress ratios (PRs) for the price of entire plants lies approximately between 90-93% (which is typical for large plant-like technologies). The costs for the boiler section alone was found to decline much faster. The experience curve approach delivers better results, when the production costs of the final energy carrier are analyzed. Electricity from biofuelled CHP-plants yields PRs of 91-92%, i.e. an 8-9% reduction of electricity production costs with each cumulative doubling of electricity production. The experience curve for biogas production displays a PR of 85% from 1984 to the beginning of 1990, and then levels to approximately 100% until 2002. For technologies developed on a local level (e.g. biogas plants), learning-by-using and learning-by-interacting are important learning mechanism, while for CHP plants utilizing fluidized bed boilers, upscaling is probably one of the main mechanisms behind cost reductions

  17. INFORMATION TECHNOLOGY IN INVESTMENT PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Vjacheslav A. Kozlov

    2014-01-01

    Full Text Available In the article it is proved that use of information technology today is not only something innovative distinctive feature and competitive advantage for organizations, but it is a necessary condition for effective business. The article discusses the main functionality of financial-analytical system Project Expert as an effective tool of investment project management and instrument of business planning. The main advantages which organizations get from Project Expert program use are in detail considered. Thus in the article Project Expert is considered as the effective tool of investment project management which allows to receive a number of advantages and to carry out the qualitative analysis of projects.

  18. Kazakhstan innovation projects in nuclear technologies field

    International Nuclear Information System (INIS)

    Shkol'nik, V.S.; Tukhvatulin, Sh.T.

    2005-01-01

    At present in the Republic of Kazakhstan in preparation and realization stage there are several innovation projects related with use of advanced nuclear technologies. Projects are as follows: 'Implementation of Kazakhstan thermonuclear reactor tokamak (KTM)'; 'Implementation at the L.N. Gumilev Eurasian National University the inter-disciplinary research complex on the heavy ions accelerator base'; 'Development of the Technological Park 'Nuclear Technologies Center in Kurchatov city'; 'Development the first in the Central-Asian region Center of Nuclear Medicine and Biophysics'. The initiator and principal operator of these projects is the National Nuclear Center of the Republic of Kazakhstan

  19. Learning services-based technological ecosystems

    OpenAIRE

    García-Peñalvo, Francisco J.; Hernández-García, Ángel; Conde, Miguel Á; Fidalgo-Blanco, Ángel; Sein-Echaluce, María L.; Alier, Marc; Llorens Largo, Faraón; Iglesias-Pradas, Santiago

    2015-01-01

    The gap between technology and learning methods has two important implications: on the one hand, we should not expect the integration of technological advances into teaching to be an easy task; and there is a danger that mature educational technologies and methods might not give an adequate answer to the demands and needs of society, underusing their transforming potential to improve learning processes. This study discusses the need for a new technological environment supporting learning serv...

  20. Technology and Bloom's Taxonomy: Tools to Facilitate Higher-Level Learning in Chemistry

    National Research Council Canada - National Science Library

    Morgan, Matthew

    1997-01-01

    This research project ties together chemistry data acquisition technology, introductory chemistry laboratory experiments, and Bloom's Taxonomy of Educational Objectives into a unified learning model...

  1. Balancing Design Project Supervision and Learning Facilitation

    DEFF Research Database (Denmark)

    Nielsen, Louise Møller

    2012-01-01

    experiences and expertise to guide the students’ decisions in relation to the design project. This paper focuses on project supervision in the context of design education – and more specifically on how this supervision is unfolded in a Problem Based Learning culture. The paper explores the supervisor......’s balance between the roles: 1) Design Project Supervisor – and 2) Learning Facilitator – with the aim to understand when to apply the different roles, and what to be aware of when doing so. This paper represents the first pilot-study of a larger research effort. It is based on a Lego Serious Play workshop......In design there is a long tradition for apprenticeship, as well as tradition for learning through design projects. Today many design educations are positioned within the University context, and have to be aligned with the learning culture and structure, which they represent. This raises a specific...

  2. Cascade Error Projection: A New Learning Algorithm

    Science.gov (United States)

    Duong, T. A.; Stubberud, A. R.; Daud, T.; Thakoor, A. P.

    1995-01-01

    A new neural network architecture and a hardware implementable learning algorithm is proposed. The algorithm, called cascade error projection (CEP), handles lack of precision and circuit noise better than existing algorithms.

  3. Technology and Innovation in Adult Learning

    Science.gov (United States)

    King, Kathy P.

    2017-01-01

    "Technology and Innovation in Adult Learning" introduces educators and students to the intersection of adult learning and the growing technological revolution. Written by an internationally recognized expert in the field, this book explores the theory, research, and practice driving innovation in both adult learning and learning…

  4. Key Issues in Global Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Roberto Sbragia

    2012-04-01

    Full Text Available This article aimed to identify those issues that were present in global technological innovation projects carried out by Brazilian multinational companies and which performance criterions these undertakings met. We investigated 36 global technological innovation projects from Brazilian multinational enterprises through a web-survey. Findings show that these companies went beyond the traditional iron triangle to evaluate their technological efforts and considered additional performance dimensions such as customer satisfaction, business results, and preparation for the future. Results also show high degree of presence for issues emerging from the industry, moderate degree of presence for issues emerging from both the project and R&D activities, and low degree of presence for issues emerging from the headquarters, the subsidiaries, and the external environment. Further research is needed to find out if and how these issues influenced the performance of the global technological innovation projects studied.DOI:10.5585/gep.v3i1.72

  5. Delivering construction projects using innovative building technologies

    CSIR Research Space (South Africa)

    Ampofo-Anti, Naalamkai

    2017-07-01

    Full Text Available . Figure 1: IBT delivery flowchart Proceedings 11th Built Environment Conference 6 th August – 8 th August 2017 Delivering construction projects using innovative building technologies Durban, South Africa 5. REFERENCES Ampofo-Anti, N...

  6. Empirical Evaluation of a Technology-rich Learning Environment

    OpenAIRE

    McCreary, Faith

    2001-01-01

    In the fall of 1996, the Computer Science Department at Virginia Tech initiated a joint project with a local school district, to determine how ready access to networked computing in the fifth grade would affect students. Called the PCs for Families (PCF) project, its goal was to learn what could be achieved if technology access, support, and curriculum integration could be eliminated as obstacles or constraints in the classroom and at home. A technology-rich classroom was created, with the cl...

  7. Individual Learning in Construction Projects: Professions and their Approaches

    Directory of Open Access Journals (Sweden)

    Ingeborg Wasif

    2010-10-01

    Full Text Available New materials, use of sophisticated technologies and increased customer demands, in combination with growing competition among construction companies, have led to a high organizational boundaries. The results indicate that personal networks are the most common source of learning for all professions. While clients, architects, and designers also engage in reading and attending courses, site managers and workers are less engaged in these activities. Experimenting and organizing for learning appear to be underutilized strategies by all professions. This leads to the conclusion that attempts to increase learning have to address the differences in learning behaviours of the various groups. Further, focus on experimenting and organizing for learning is a possibility to change the learning behaviour from learning as a consequence of problems to learning for future improvement.degree of specialization. For successful integration of the different professional specialists, there is a need for shared learning between project co-workers. Based on twenty eight interviews in six different Swedish construction projects, this paper illustrates strategies for individual and shared learning, among different actors and across various

  8. Project of Atomic Energy Technology Record

    International Nuclear Information System (INIS)

    Song, K. C.; Ko, Y. C.; Kwon, K. C.

    2012-12-01

    Project of the Atomic Energy Technology Record is the project that summarizes and records whole process, from the background to the performance, of each category in all fields of nuclear science technology which have been researched and developed at KAERI. This project includes development of Data And Documents Advanced at KAERI. This project includes development of Data And Documents Advanced Management System(DADAMS) to collect, organize and preserve various records occurred in each research and development process. In addition, it means the whole records related to nuclear science technology for the past, present and future. This report summarizes research contents and results of 'Project of Atomic Energy Technology Record'. Section 2 summarizes the theoretical background, the current status of records management in KAERI and the overview of this project. And Section 3 to 6 summarize contents and results performed in this project. Section 3 is about the process of sectoral technology record, Section 4 summarizes the process of Information Strategy Master Plan(ISMP), Section 5 summarizes the development of Data And Documents Advanced Management System(DADAMS) and Section 6 summarizes the process of collecting, organizing and digitalizing of records

  9. Employing Wikibook Project in a Linguistics Course to Promote Peer Teaching and Learning

    Science.gov (United States)

    Wang, Lixun

    2016-01-01

    Peer teaching and learning are learner-centred approaches with great potential for promoting effective learning, and the fast development of Web 2.0 technology has opened new doors for promoting peer teaching and learning. In this study, we aim to establish peer teaching and learning among students by employing a Wikibook project in the course…

  10. Nationalism and technological learning; Nacionalismo e aprendizagem tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, Andre Tosi; Freitas, Adriana Gomes [Universidade Estadual de Campinas, SP (Brazil). Inst. de Geociencias. Dept. de Politica Cientifica e Tecnologica]. E-mail: furtado@ige.unicamp.br; adriana@ige.unicamp.br

    2002-07-01

    This work evaluates the economic impacts resulting from the different forms of learning resulting from the execution of national technological projects. As an example, the work mentions the technological capability in deep water production systems promote by the PETROBRAS, in the period of the years 1986-2000. Based on a prior study, seven projects have been selected by a common characteristic of non successful commercial results. The main argument shows that nevertheless the commercial throwback, these projects were in the origin of important learning processes in the company, resulting in significant indirect economic impacts. Each of the project and the economic impact are described. The data of the research referring to the project samples are presented, revealing that the economic impacts are greater than seven times the project costs.

  11. Early Learning and Educational Technology Policy Brief

    Science.gov (United States)

    Lee, Joan

    2016-01-01

    Recognizing the growth of technology use in early learning settings, the U.S. Department of Education and U.S. Department of Health and Human Services collaborated in the development of the "Early Learning and Educational Technology Policy Brief" to promote developmentally appropriate use of technology in homes and early learning…

  12. Expanding educational access and opportunities: The globalization and foreign direct investment of multinational corporations and their influence on STEM, project-based learning and the national science and technology fair in schools in Costa Rica

    Science.gov (United States)

    Valdez, Joaquin G.

    The purpose of this qualitative study was to examine the influence of globalization and the foreign direct investment (FDI) of multinational corporations (MNCs) on the curriculum in schools in Costa Rica. The study focused primarily on Science, Technology, Engineering and Mathematics (STEM), Project-Based Learning (PBL), 21st century skills, and the national science and technology fair. The high influx of MNCs such as Intel has changed the global and educational culture of the country increasing the number of knowledge-based workers in Costa Rica. As a result, policy changes have been instituted in education to mirror the demands of sustaining the country's global economy. This study was supported by the creation of three research questions that would attempt to answer 1) the extent that teachers implementing STEM curriculum trace their practices back to policy, globalization, and multinational corporations as well as the extent to which the economic growth of Costa Rica and STEM education are related, 2) how mandating the national science and technology fair has influenced 21st century skills through project-based learning and the use of technology by teachers and its impact on curriculum and instruction, and 3) how has the national science and technology fair policy changed the value of STEM education for students, teachers, and educational leaders. To further understand the outcome of this study, four theoretical frameworks were applied that included, Spring's theory of world educational culture, Friedman's world flatteners, Wagner's 21st century skills and partnerships for 21st century skills, and Slough and Milam's STEM project-based learning theoretical framework. Each framework was applied to support the changes to the educational system; survival skills necessary to compete in the global job market; application of 21st century skills in the classroom and in the science projects students created. A research team comprised of 14 doctoral students, led by Dr

  13. Learning in a technology enhanced world

    OpenAIRE

    Specht, Marcus

    2010-01-01

    Specht, M. (2009). Learning in a technology enhanced world. Invited talk given at the World Conference on E-learning in Corporate, Government, Healthcare & Higher Education. October, 27, 2009, Vancouver, Canada.

  14. Project-Based Learning in Scottish Prisons

    Science.gov (United States)

    Sams, Kirsten

    2014-01-01

    The article describes the development of a project-based approach to learning in seven Scottish prisons. It argues that the project-based approach is ideally suited to prison education due to its flexibility and ability to enrich the relatively narrow prison curriculum and create meaningful links with wider society, reducing the isolation of…

  15. Project-organized collaborative learning in distance engineering education

    DEFF Research Database (Denmark)

    Knudsen, Morten; Bajard, C.; Helbo, Jan

    2003-01-01

    Transferring a successful on-campus project-organized learning method to distance continued education is complicated by the fact, that the target group as well as the learning environment and forms of communication are fundamentally different. The Master of Industrial Information Technology...... distance education has been selected for experiments with utilization of new information and commu-nication technology and didactic adjustments to make this transfer from on-campus to off-campus a successful endeavor. The adjustments, as well as the assessment of their effect, are based on a system......-atic monitoring and evaluation of the first year, and subsequent reflections by students and teachers....

  16. Creative learning technologies as a catalyst for rethinking education

    DEFF Research Database (Denmark)

    Gjedde, Lisa

    2017-01-01

    is on exploring how learning with creative technologies can be a catalyst for rethinking education in primary and lower secondary school The mixed methods based research project has involved classes from all schools in one municipality in Denmark in digital creative lab activities The research points...... presents preliminary results from an R&D project on teacher led designs for creative and multimodal learning The focus is on developing designs for learning using creative learning technologies These include digital storytelling with mobile devices and digital animation in hybrid environments The focus......There is a movement towards a new paradigm in the mediatized Scandinavian societies that aims at developing the students' creativity, critical sense and ability to collaborate and communicate, thereby equipping them with necessary media skills and competencies for 21st Century learning This paper...

  17. SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Cassio C. Montenegro Duarte

    2012-05-01

    Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

  18. Project Oriented Immersion Learning: Method and Results

    DEFF Research Database (Denmark)

    Icaza, José I.; Heredia, Yolanda; Borch, Ole M.

    2005-01-01

    A pedagogical approach called “project oriented immersion learning” is presented and tested on a graduate online course. The approach combines the Project Oriented Learning method with immersion learning in a virtual enterprise. Students assumed the role of authors hired by a fictitious publishing...... house that develops digital products including e-books, tutorials, web sites and so on. The students defined the problem that their product was to solve; choose the type of product and the content; and built the product following a strict project methodology. A wiki server was used as a platform to hold...

  19. The Virtual Learning Commons: An Emerging Technology for Learning About Emerging Technologies

    Science.gov (United States)

    Pennington, D. D.; Del Rio, N.; Fierro, C.; Gandara, A.; Garcia, A.; Garza, J.; Giandoni, M.; Ochoa, O.; Padilla, E.; Salamah, S.

    2013-12-01

    The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of semantic, visualization, and social media tools that support knowledge sharing and innovation across research disciplines. The explosion of new scientific tools and techniques challenges the ability of researchers to be aware of emerging technologies that might benefit them. Even when aware, it can be difficult to understand enough about emerging technologies to become potential adopters or re-users. Often, emerging technologies have little documentation, especially about the context of their use. The VLC tackles this challenge by providing mechanisms for individuals and groups of researchers to collectively organize Web resources through social bookmarking, and engage each other around those collections in order to a) learn about potentially relevant technologies that are emerging; and b) get feedback from other researchers on innovative ideas and designs. Concurrently, developers of emerging technologies can learn about potential users and the issues they encounter, and they can analyze the impact of their tools on other projects. The VLC aims to support the 'fuzzy front end' of innovation, where novel ideas emerge and there is the greatest potential for impact on research design. It is during the fuzzy front end that conceptual collisions across disciplines and exposure to diverse perspectives provide opportunity for creative thinking that can lead to inventive outcomes. This presentation will discuss the innovation theories that have informed design of the VLC, and hypotheses about the flow of information in virtual settings that can enable the process of innovation. The presentation will include a brief demonstration of key capabilities within the VLC that enable learning about emerging technologies, including the technologies that are presented in this session.

  20. System light-loading technology for mHealth: Manifold-learning-based medical data cleansing and clinical trials in WE-CARE Project.

    Science.gov (United States)

    Huang, Anpeng; Xu, Wenyao; Li, Zhinan; Xie, Linzhen; Sarrafzadeh, Majid; Li, Xiaoming; Cong, Jason

    2014-09-01

    Cardiovascular disease (CVD) is a major issue to public health. It contributes 41% to the Chinese death rate each year. This huge loss encouraged us to develop a Wearable Efficient teleCARdiology systEm (WE-CARE) for early warning and prevention of CVD risks in real time. WE-CARE is expected to work 24/7 online for mobile health (mHealth) applications. Unfortunately, this purpose is often disrupted in system experiments and clinical trials, even if related enabling technologies work properly. This phenomenon is rooted in the overload issue of complex Electrocardiogram (ECG) data in terms of system integration. In this study, our main objective is to get a system light-loading technology to enable mHealth with a benchmarked ECG anomaly recognition rate. To achieve this objective, we propose an approach to purify clinical features from ECG raw data based on manifold learning, called the Manifold-based ECG-feature Purification algorithm. Our clinical trials verify that our proposal can detect anomalies with a recognition rate of up to 94% which is highly valuable in daily public health-risk alert applications based on clinical criteria. Most importantly, the experiment results demonstrate that the WE-CARE system enabled by our proposal can enhance system reliability by at least two times and reduce false negative rates to 0.76%, and extend the battery life by 40.54%, in the system integration level.

  1. Ceramic technology for advanced heat engines project

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems in Conservation and Renewable Energy. This project was developed to meet the ceramic technology requirements of the OTT's automotive technology programs. This project is managed by ORNL and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DoD, and industry. Research is discussed under the following topics; Turbomilling of SiC Whiskers; microwave sintering of silicon nitride; and milling characterization; processing of monolithics; silicon nitride matrix; oxide matrix; silicate matrix; thermal and wear coatings; joining; design; contact interfaces; time-dependent behavior; environmental effects; fracture mechanics; nondestructive evaluation; and technology transfer. References, figures, and tables are included with each topic.

  2. The ITER project technological challenges

    CERN Multimedia

    CERN. Geneva; Lister, Joseph; Marquina, Miguel A; Todesco, Ezio

    2005-01-01

    The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the designer approach and the available technologies are critically discussed. The fourth lecture is devoted to the issue of performance prediction, from a superconducting wire to a large size conductor. The role of scaling laws, self-field, current distribution, voltage-current characteristic and transposition are...

  3. Computational intelligence for technology enhanced learning

    Energy Technology Data Exchange (ETDEWEB)

    Xhafa, Fatos [Polytechnic Univ. of Catalonia, Barcelona (Spain). Dept. of Languages and Informatics Systems; Caballe, Santi; Daradoumis, Thanasis [Open Univ. of Catalonia, Barcelona (Spain). Dept. of Computer Sciences Multimedia and Telecommunications; Abraham, Ajith [Machine Intelligence Research Labs (MIR Labs), Auburn, WA (United States). Scientific Network for Innovation and Research Excellence; Juan Perez, Angel Alejandro (eds.) [Open Univ. of Catalonia, Barcelona (Spain). Dept. of Information Sciences

    2010-07-01

    E-Learning has become one of the most wide spread ways of distance teaching and learning. Technologies such as Web, Grid, and Mobile and Wireless networks are pushing teaching and learning communities to find new and intelligent ways of using these technologies to enhance teaching and learning activities. Indeed, these new technologies can play an important role in increasing the support to teachers and learners, to shorten the time to learning and teaching; yet, it is necessary to use intelligent techniques to take advantage of these new technologies to achieve the desired support to teachers and learners and enhance learners' performance in distributed learning environments. The chapters of this volume bring advances in using intelligent techniques for technology enhanced learning as well as development of e-Learning applications based on such techniques and supported by technology. Such intelligent techniques include clustering and classification for personalization of learning, intelligent context-aware techniques, adaptive learning, data mining techniques and ontologies in e-Learning systems, among others. Academics, scientists, software developers, teachers and tutors and students interested in e-Learning will find this book useful for their academic, research and practice activity. (orig.)

  4. Project InterActions: A Multigenerational Robotic Learning Environment

    Science.gov (United States)

    Bers, Marina U.

    2007-12-01

    This paper presents Project InterActions, a series of 5-week workshops in which very young learners (4- to 7-year-old children) and their parents come together to build and program a personally meaningful robotic project in the context of a multigenerational robotics-based community of practice. The goal of these family workshops is to teach both parents and children about the mechanical and programming aspects involved in robotics, as well as to initiate them in a learning trajectory with and about technology. Results from this project address different ways in which parents and children learn together and provide insights into how to develop educational interventions that would educate parents, as well as children, in new domains of knowledge and skills such as robotics and new technologies.

  5. Project-based Collaborative learning in distance education

    DEFF Research Database (Denmark)

    Knudsen, Morten; Bajard, Christine; Helbo, Jan

    2004-01-01

    ) programme indicates, however, that adjustments are required in transforming the on-campus model to distance education. The main problem is that while project work is an excellent regulator of the learning process for on-campus students, this does not seem to be the case for off-campus students. Consequently......This article describes the experiences drawn from an experiment in transferring positive experience with a project-organised on-campus engineering programme to a technology supported distance education programme. Three years of experience with the Master of Industrial Information Technology (MII......, didactic adjustments have been made based on feedback, in particular from evaluation questionnaires. This process has been very constructive in approaching the goal: a successful model for project organized learning in distance education....

  6. Project inspection using mobile technology - phase II : assessing the impacts of mobile technology on project inspection.

    Science.gov (United States)

    2015-01-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this : technology to streamline operations involved within project inspection. This research, conducted in two : phases, identified opportunities for proces...

  7. 5G technologies boosting efficient mobile learning

    Directory of Open Access Journals (Sweden)

    Leligou Helen C.

    2017-01-01

    Full Text Available The needs for education, learning and training proliferate primarily due to the facts that economy becomes more and more knowledge based (mandating continuous lifelong learning and people migrate among countries, which introduces the need for learning other languages, for training on different skills and learning about the new cultural and societal framework. Given that in parallel, time schedules continuously become tighter, learning through mobile devices continuously gains in popularity as it allows for learning anytime, anywhere. To increase the learning efficiency, personalisation (in terms of selecting the learning content, type and presentation and adaptation of the learning experience in real time based on the experienced affect state are key instruments. All these user requirements challenge the current network architectures and technologies. In this paper, we investigate the requirements implied by efficient mobile learning scenarios and we explore how 5G technologies currently under design/testing/validation and standardisation meet these requirements.

  8. Learning Physics through Project-Based Learning Game Techniques

    Science.gov (United States)

    Baran, Medine; Maskan, Abdulkadir; Yasar, Seyma

    2018-01-01

    The aim of the present study, in which Project and game techniques are used together, is to examine the impact of project-based learning games on students' physics achievement. Participants of the study consist of 34 9th grade students (N = 34). The data were collected using achievement tests and a questionnaire. Throughout the applications, the…

  9. Technology Management on Large Construction Projects

    DEFF Research Database (Denmark)

    Bonke, Sten

    The aim of this text is to discuss and to develop the concept of technology management in relation to the empirical field of construction projects. In the first of the two main sections central theories and their derived assertions concerning technology management criteria are summed up...... Fixed Link construction project. Finally on this basis the concluding remarks are pointing to the main theoretical problems and their practical implementations for the introduction of a technology management discipline in construction....... in a schematic theoretical framework. Hereafter the general characteristics of construction are examined from the point of view of serving as an empirical field for technology management analysis. In the second section the technology management theme is associated with the empirical properties of the Great Belt...

  10. Moonlight project promotes energy-saving technology

    Science.gov (United States)

    Ishihara, A.

    1986-01-01

    In promoting energy saving, development of energy conservation technologies aimed at raising energy efficiency in the fields of energy conversion, its transportation, its storage, and its consumption is considered, along with enactment of legal actions urging rational use of energies and implementation of an enlightenment campaign for energy conservation to play a crucial role. Under the Moonlight Project, technical development is at present being centered around the following six pillars: (1) large scale energy saving technology; (2) pioneering and fundamental energy saving technology; (3) international cooperative research project; (4) research and survey of energy saving technology; (5) energy saving technology development by private industry; and (6) promotion of energy saving through standardization. Heat pumps, magnetohydrodynamic generators and fuel cells are discussed.

  11. Technology Learning Ratios in Global Energy Models

    International Nuclear Information System (INIS)

    Varela, M.

    2001-01-01

    The process of introduction of a new technology supposes that while its production and utilisation increases, also its operation improves and its investment costs and production decreases. The accumulation of experience and learning of a new technology increase in parallel with the increase of its market share. This process is represented by the technological learning curves and the energy sector is not detached from this process of substitution of old technologies by new ones. The present paper carries out a brief revision of the main energy models that include the technology dynamics (learning). The energy scenarios, developed by global energy models, assume that the characteristics of the technologies are variables with time. But this trend is incorporated in a exogenous way in these energy models, that is to say, it is only a time function. This practice is applied to the cost indicators of the technology such as the specific investment costs or to the efficiency of the energy technologies. In the last years, the new concept of endogenous technological learning has been integrated within these global energy models. This paper examines the concept of technological learning in global energy models. It also analyses the technological dynamics of the energy system including the endogenous modelling of the process of technological progress. Finally, it makes a comparison of several of the most used global energy models (MARKAL, MESSAGE and ERIS) and, more concretely, about the use these models make of the concept of technological learning. (Author) 17 refs

  12. Projection display technologies for the new millennium

    Science.gov (United States)

    Kahn, Frederic J.

    2000-04-01

    Although analog CRTs continue to enable most of the world's electronic projection displays such as US consumer rear projection televisions, discrete pixel (digital) active matrix LCD and DLP reflective mirror array projectors have rapidly created large nonconsumer markets--primarily for business. Recent advances in image quality, compactness and cost effectiveness of digital projectors have the potential to revolutionize major consumer and entertainment markets as well. Digital penetration of the mainstream consumer projection TV market will begin in the hear 2000. By 2005 digital projection HDTVs could take the major share of the consumer HDTV projection market. Digital projection is expected to dominate both the consumer HDTV and the cinema market by 2010, resulting in potential shipments for all projection markets exceeding 10 M units per year. Digital projection is improving at a rate 10X faster than analog CRT projectors and 5X faster than PDP flat panels. Continued rapid improvement of digital projection is expected due to its relative immaturity and due to the wide diversity of technological improvements being pursued. Key technology enablers are the imaging panels, light sources and micro-optics. Market shares of single panel projectors, MEMs panels, LCOS panels and low T p-Si TFT LCD panel variants are expected to increase.

  13. Canadian Fusion Fuels Technology Project activities report

    International Nuclear Information System (INIS)

    1985-01-01

    The Canadian Fusion Fuels Technology Project was formally established in 1982. The project is directed toward the further development of Canadian capabilities in five major areas: tritium technology, breeder technology, materials technology, equipment development and safety and the environment. The project is funded by three partners - Government of Canada (50%), Ontario Provincial Government (25%) and Ontario Hydro (25%). The fiscal year 1984/85 represents the third year of operation of the project. In 1984/85, 108 contracts were awarded totalling $4 million. Supplementary funding by subcontractors added approximately $1.9 million to the total project value. More than 200 people participated in the technical work involved in the project. Sixteen people were on attachment to foreign facilities for terms ranging from 1 month to 2.5 years. Five patents were applied for including a tritium discrimination monitor, a new radio-chemical tritium separation method, a new variation of fuel cleanup by gas chromatography, a passive tritium permeation system using bimetallic membranes, and a new breeder process using lithium salts dissolved in heavy water

  14. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    International Nuclear Information System (INIS)

    Williams, C.V.; Burford, T.D.

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy's (DOE's) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID's technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID

  15. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  16. ICT support for students’ collaboration in problem and project based learning

    DEFF Research Database (Denmark)

    Rongbutsri, Nikorn; Khalid, Md. Saifuddin; Ryberg, Thomas

    2011-01-01

    This paper reports and analyses quantitative and qualitative data from a study, which seeks a better understanding of how students use various technologies to support their project collaboration activities in a problem and project based learning environment. More generally the aim of the study......, and the present paper, is to shed light on students’ technology practices within higher education – particularly in relation to problem and project based learning....

  17. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems and Fr...... be a huge benefit from developing learning design patterns that facilitate informal peer learning and reinforce knowledge sharing practices.......This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...

  18. Learning between projects: More than sending messages in bottles

    OpenAIRE

    Hartmann, Andreas; Dorée, André

    2015-01-01

    Although learning from projects has gained much importance in research and practice, progress in understanding and improving inter-project learning appears to be slight. We argue that the adoption of a sender/receiver approach limits the learning effectiveness in project-based organisations. Drawing upon the notion of learning as a social activity embedded in an organisational context, we develop the argument that learning from projects takes place within projects rooted in the historical, or...

  19. The Canadian Fusion Fuels Technology Project

    International Nuclear Information System (INIS)

    Dautovich, D.P.; Gierszewski, P.J.; Wong, K.Y.; Stasko, R.R.; Burnham, C.D.

    1987-04-01

    The Canadian Fusion Fuels Technology Project (CFFTP) is a national project whose aim is to develop capability in tritium and robotics technologies for application to international fusion development programs. Activities over the first five years have brought substantial interaction with the world's leading projects such as Tokamak Fusion Test Reactor (TFTR), the Joint European Torus (JET), and the Next European Torus (NET), Canadian R and D and engineering services, and hardware are in demand as these major projects prepare for tritium operation leading to the demonstration of energy breakeven around 1990. Global planning is underway for the next generation ignition experiment. It is anticipated this will provide increased opportunity for CFFTP and its contractors among industry, universities and governmental laboratories

  20. Technological economics: innovation, project management, and technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, F R

    1981-06-01

    The relationship between economics and technology, as well as their interaction in production, productivity, project management, and in technology transfer processes are reviewed. Over the last two decades there has been an increasing interest by economists in the technologist's view of technical change and its mechanisms. The author looks at the zone between technology and economics, the technological economics, and discusses the theory of innovation recently sketched out by Nelson and Winter. The relevance to project management and technology transfer of contemporary writing by economists leads to the view that there are welcome signs of a convergence of the conceptual models now emerging and the practical problems of technology management and movement. Economists now seem more willing to come to terms with technology than technologists with economics. The economic significance of the multitudes of technically unglamorous activities in development work is seriously neglected as a result of over-emphasis on the spectacular technological break. If economic elegance were to be admitted to the criteria of success, one might get a significant improvement in the engineering of technological change. 29 references, 4 figure.

  1. Information Technology in Engineering and Project Management

    Directory of Open Access Journals (Sweden)

    Chien-Ho Ko

    2017-01-01

    Full Text Available Information Technology (IT can be regarded as the use of computers to store, analyze, and manipulate data (Daintith, 2009. With the rapid development of personal computers, IT has been widely applied in nearly every field (Davenport, 2013. This issue presents five papers covering engineering and project management, three of which focus on the application of IT to solve engineering and project management issues, while one presents research into public private partnerships, and another into cash flow forecasting.

  2. Ceramic Technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially.

  3. A Correlational Study Assessing the Relationships among Information Technology Project Complexity, Project Complication, and Project Success

    Science.gov (United States)

    Williamson, David J.

    2011-01-01

    The specific problem addressed in this study was the low success rate of information technology (IT) projects in the U.S. Due to the abstract nature and inherent complexity of software development, IT projects are among the most complex projects encountered. Most existing schools of project management theory are based on the rational systems…

  4. Recommender Systems in Technology Enhanced Learning

    NARCIS (Netherlands)

    Manouselis, Nikos; Drachsler, Hendrik; Verbert, Katrien; Santos, Olga

    2010-01-01

    Manouselis, N., Drachsler, H., Verbert, K., & Santos, C. S. (Eds.) (2010). Recommender System in Technology Enhanced Learning. Elsevier Procedia Computer Science: Volume 1, Issue 2. Proceedings of the 1st Workshop on Recommender Systems for Technology Enhanced Learning (RecSysTEL). September, 29-30,

  5. Learner Ownership of Technology-Enhanced Learning

    Science.gov (United States)

    Dommett, Eleanor J.

    2018-01-01

    Purpose: This paper aims to examine the different ways in which learners may have ownership over technology-enhanced learning by reflecting on technical, legal and psychological ownership. Design/methodology/approach: The paper uses a variety of examples of technology-enhanced learning ranging from open-source software to cloud storage to discuss…

  6. Connecting Learning Spaces Using Mobile Technology

    Science.gov (United States)

    Chen, Wenli; Seow, Peter; So, Hyo-Jeong; Toh, Yancy; Looi, Chee-Kit

    2010-01-01

    The use of mobile technology can help extend children's learning spaces and enrich the learning experiences in their everyday lives where they move from one context to another, switching locations, social groups, technologies, and topics. When students have ubiquitous access to mobile devices with full connectivity, the in-situ use of the mobile…

  7. Medical students' online learning technology needs.

    Science.gov (United States)

    Han, Heeyoung; Nelson, Erica; Wetter, Nathan

    2014-02-01

    This study investigated medical students' online learning technology needs at a medical school. The study aimed to provide evidence-based guidance for technology selection and online learning design in medical education. The authors developed a 120-item survey in collaboration with the New Technology in Medical Education (NTIME) committee at the Southern Illinois University School of Medicine (SIUSOM). Overall, 123 of 290 medical students (42%) at the medical school participated in the survey. The survey focused on five major areas: students' hardware and software use; perception of educational technology (ET) in general; online behaviours; perception of ET use at the school; and demographic information. Students perceived multimedia tools, scheduling tools, communication tools, collaborative authoring tools, learning management systems and electronic health records useful educational technologies for their learning. They did not consider social networking tools useful for their learning, despite their frequent use. Third-year students were less satisfied with current technology integration in the curriculum, information sharing and collaborative learning than other years. Students in clerkships perceived mobile devices as useful for their learning. Students using a mobile device (i.e. a smartphone) go online, text message, visit social networking sites and are online during classes more frequently than non-users. Medical students' ET needs differ between preclinical and clinical years. Technology supporting ubiquitous mobile learning and health information technology (HIT) systems at hospitals and out-patient clinics can be integrated into clerkship curricula. © 2014 John Wiley & Sons Ltd.

  8. Myths about Technology-Supported Professional Learning

    Science.gov (United States)

    Killion, Joellen; Treacy, Barbara

    2014-01-01

    The future of professional learning is shaped by its present and past. As new technologies emerge to increase affordability, access, and appropriateness of professional learning, three beliefs are visible in current practices related to online learning. Each contains a premise that merits identification and examination. The authors call these…

  9. Teachers as designers of technology enhanced learning

    NARCIS (Netherlands)

    Kali, Yael; McKenney, Susan; Sagy, Ornit; Voogt, Joke

    2015-01-01

    Design of (technology-enhanced) learning activities and materials is one fruitful process through which teachers learn and become professionals. To facilitate this process, research is needed to understand how teachers learn through design, how this process may be supported, and how teacher

  10. [Managing digital medical imaging projects in healthcare services: lessons learned].

    Science.gov (United States)

    Rojas de la Escalera, D

    2013-01-01

    Medical imaging is one of the most important diagnostic instruments in clinical practice. The technological development of digital medical imaging has enabled healthcare services to undertake large scale projects that require the participation and collaboration of many professionals of varied backgrounds and interests as well as substantial investments in infrastructures. Rather than focusing on systems for dealing with digital medical images, this article deals with the management of projects for implementing these systems, reviewing various organizational, technological, and human factors that are critical to ensure the success of these projects and to guarantee the compatibility and integration of digital medical imaging systems with other health information systems. To this end, the author relates several lessons learned from a review of the literature and the author's own experience in the technical coordination of digital medical imaging projects. Copyright © 2012 SERAM. Published by Elsevier Espana. All rights reserved.

  11. The Effect of Learning Based on Technology Model and Assessment Technique toward Thermodynamic Learning Achievement

    Science.gov (United States)

    Makahinda, T.

    2018-02-01

    The purpose of this research is to find out the effect of learning model based on technology and assessment technique toward thermodynamic achievement by controlling students intelligence. This research is an experimental research. The sample is taken through cluster random sampling with the total respondent of 80 students. The result of the research shows that the result of learning of thermodynamics of students who taught the learning model of environmental utilization is higher than the learning result of student thermodynamics taught by simulation animation, after controlling student intelligence. There is influence of student interaction, and the subject between models of technology-based learning with assessment technique to student learning result of Thermodynamics, after controlling student intelligence. Based on the finding in the lecture then should be used a thermodynamic model of the learning environment with the use of project assessment technique.

  12. Game Changer for Online Learning Driven by Advances in Web Technology

    Science.gov (United States)

    Kaul, Manfred; Kless, André; Bonne, Thorsten; Rieke, Almut

    2017-01-01

    Almost unnoticed by the e-learning community, the underlying technology of the WWW is undergoing massive technological changes on all levels these days. In this paper we draw the attention to the emerging game changer and discuss the consequences for online learning. In our e-learning project "Work & Study", funded by the German…

  13. Ceramic Technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  14. Technology transfer and technological learning through CERN's procurement activity

    CERN Document Server

    Autio, Erkko; Hameri, Ari-Pekka; CERN. Geneva

    2003-01-01

    This report analyses the technological learning and innovation benefits derived from CERN's procurement activity during the period 1997-2001. The base population of our study, the technology-intensive suppliers to CERN, consisted of 629 companies out of 6806 companies during the same period, representing 1197 MCHF in procurement. The main findings from the study can be summarized as follows: the various learning and innovation benefits (e.g., technological learning, organizational capability development, market learning) tend to occur together. Learning and innovation benefits appear to be regulated by the quality of the supplier's relationship with CERN: the greater the amount of social capital built into the relationship, the greater the learning and innovation benefits. Regardless of relationship quality, virtually all suppliers derived significant marketing reference benefits from CERN. Many corollary benefits are associated with procurement activity. As an example, as many as 38% of the respondents devel...

  15. Projection display industry market and technology trends

    Science.gov (United States)

    Castellano, Joseph A.; Mentley, David E.

    1995-04-01

    The projection display industry is diverse, embracing a variety of technologies and applications. In recent years, there has been a high level of interest in projection displays, particularly those using LCD panels or light valves because of the difficulty in making large screen, direct view displays. Many developers feel that projection displays will be the wave of the future for large screen HDTV (high-definition television), penetrating the huge existing market for direct view CRT-based televisions. Projection displays can have the images projected onto a screen either from the rear or the front; the main characteristic is their ability to be viewed by more than one person. In addition to large screen home television receivers, there are numerous other uses for projection displays including conference room presentations, video conferences, closed circuit programming, computer-aided design, and military command/control. For any given application, the user can usually choose from several alternative technologies. These include CRT front or rear projectors, LCD front or rear projectors, LCD overhead projector plate monitors, various liquid or solid-state light valve projectors, or laser-addressed systems. The overall worldwide market for projection information displays of all types and for all applications, including home television, will top DOL4.6 billion in 1995 and DOL6.45 billion in 2001.

  16. Project-Based Collaborative Learning in Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten; Bajard, C.; Helbo, Jan

    2003-01-01

    This article describes the experiences drawn from an experiment in transferring positive experience with a project-organised on-campus engineering programme to a technology supported distance education programme. Three years of experience with the Master of Industrial Information Technology (MII)......, didactic adjustments have been made based on feedback, in particular from evaluation questionnaires. This process has been very constructive in approaching the goal: a successful model for project organized learning in distance education.......) programme indicates, however, that adjustments are required in transforming the on-campus model to distance education. The main problem is that while project work is an excellent regulator of the learning process for on-campus students, this does not seem to be the case for off-campus students. Consequently......This article describes the experiences drawn from an experiment in transferring positive experience with a project-organised on-campus engineering programme to a technology supported distance education programme. Three years of experience with the Master of Industrial Information Technology (MII...

  17. Technology Cooperation Agreement Pilot Project (TCAPP)

    Energy Technology Data Exchange (ETDEWEB)

    Keegan, P.; Benioff, R.

    1999-10-20

    The Technology Cooperation Agreement Pilot Project (TCAPP) is helping developing countries design and implement actions to attract investment in clean energy technologies that will meet their economic development goals, while mitigating greenhouse gas emissions. TCAPP was launched by three US government agencies -- the US Agency for International Development (USAID), the US Environmental Protection Agency (USEPA), and the US Department of Energy (USDOE) -- in August 1997 to establish a model for climate change technology cooperation with developing and transition countries. This report describes the TCAPP approach and the significant progress made by the participating countries.

  18. Photovoltaic concentrator technology development project. Sixth project integration meeting

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Thirty-three abstracts and short papers are presented which describe the current status of research, development, and demonstration of concentrator solar cell technology. Solar concentrators discussed include the parabolic trough, linear focus Fresnel lens, point focus Fresnel lens, and the parabolic dish. Solar cells studied include silicon, GaAs, and AlGaAs. Research on multiple junction cells, combined photovoltaic/thermal collectors, back contact solar cells, and beam splitter modules is described. Concentrator solar cell demonstration programs are reported. Contractor status summaries are given for 33 US DOE concentrator solar cell contracts; a description of the project, project status, and key results to date is included. (WHK)

  19. Collaborative Action Research on Technology Integration for Science Learning

    Science.gov (United States)

    Wang, Chien-Hsing; Ke, Yi-Ting; Wu, Jin-Tong; Hsu, Wen-Hua

    2012-02-01

    This paper briefly reports the outcomes of an action research inquiry on the use of blogs, MS PowerPoint [PPT], and the Internet as learning tools with a science class of sixth graders for project-based learning. Multiple sources of data were essential to triangulate the key findings articulated in this paper. Corresponding to previous studies, the incorporation of technology and project-based learning could motivate students in self-directed exploration. The students were excited about the autonomy over what to learn and the use of PPT to express what they learned. Differing from previous studies, the findings pointed to the lack information literacy among students. The students lacked information evaluation skills, note-taking and information synthesis. All these findings imply the importance of teaching students about information literacy and visual literacy when introducing information technology into the classroom. The authors suggest that further research should focus on how to break the culture of "copy-and-paste" by teaching the skills of note-taking and synthesis through inquiry projects for science learning. Also, further research on teacher professional development should focus on using collaboration action research as a framework for re-designing graduate courses for science teachers in order to enhance classroom technology integration.

  20. JUPITER PROJECT - MERGING INVERSE PROBLEM FORMULATION TECHNOLOGIES

    Science.gov (United States)

    The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project seeks to enhance and build on the technology and momentum behind two of the most popular sensitivity analysis, data assessment, calibration, and uncertainty analysis programs used in envi...

  1. Ceramic technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1991-07-01

    Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

  2. Advanced Training Technologies and Learning Environments

    Science.gov (United States)

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1999-01-01

    This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.

  3. Ceramic Technology For Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.

  4. Projection display technology for avionics applications

    Science.gov (United States)

    Kalmanash, Michael H.; Tompkins, Richard D.

    2000-08-01

    Avionics displays often require custom image sources tailored to demanding program needs. Flat panel devices are attractive for cockpit installations, however recent history has shown that it is not possible to sustain a business manufacturing custom flat panels in small volume specialty runs. As the number of suppliers willing to undertake this effort shrinks, avionics programs unable to utilize commercial-off-the-shelf (COTS) flat panels are placed in serious jeopardy. Rear projection technology offers a new paradigm, enabling compact systems to be tailored to specific platform needs while using a complement of COTS components. Projection displays enable improved performance, lower cost and shorter development cycles based on inter-program commonality and the wide use of commercial components. This paper reviews the promise and challenges of projection technology and provides an overview of Kaiser Electronics' efforts in developing advanced avionics displays using this approach.

  5. Accelerators for the advanced radiation technology project

    International Nuclear Information System (INIS)

    Maruyama, Michio

    1990-01-01

    Ion beam irradiation facilities are now under construction for the advanced radiation technology (ART) project in Takasaki Radiation Chemistry Research Establishment of (Japan Atomic Energy Research Institute) JAERI. The project is intended to make an effective use of ion beams, especially ion beams, in the research field of radiation application technology. The TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities include four ion accelerators to produce almost all kinds of energetic ions in the periodic table. The facilities are also provided with several advanced irradiation means and act as very powerful accelerator complex for material development. Specifically, this report presents an outline of the ART project, features of TIARA as accelerator facilities dedicated to material development, the AVF cyclotron under construction (Sumitomo Heavy Industries, Ltd., Model 930), tandem accelerator, microbeam, and experimental instruments used. (N.K.)

  6. Biologically inspired technologies in NASA's morphing project

    Science.gov (United States)

    McGowan, Anna-Maria R.; Cox, David E.; Lazos, Barry S.; Waszak, Martin R.; Raney, David L.; Siochi, Emilie J.; Pao, S. Paul

    2003-07-01

    For centuries, biology has provided fertile ground for hypothesis, discovery, and inspiration. Time-tested methods used in nature are being used as a basis for several research studies conducted at the NASA Langley Research Center as a part of Morphing Project, which develops and assesses breakthrough vehicle technologies. These studies range from low drag airfoil design guided by marine and avian morphologies to soaring techniques inspired by birds and the study of small flexible wing vehicles. Biology often suggests unconventional yet effective approaches such as non-planar wings, dynamic soaring, exploiting aeroelastic effects, collaborative control, flapping, and fibrous active materials. These approaches and other novel technologies for future flight vehicles are being studied in NASA's Morphing Project. This paper will discuss recent findings in the aeronautics-based, biologically-inspired research in the project.

  7. USING DISTANCE LEARNING TECHNOLOGIES IN THE LEARNING PROCESS OF MODERN PROGRAMMING LANGUAGES

    Directory of Open Access Journals (Sweden)

    Mariia A. Umryk

    2014-06-01

    Full Text Available In the research it was reviewed the use of distance learning technologies in the organization of research tasks while studying modern programming languages. The article contains an example of a training project on the subject "Modern programming languages". The authors argue the necessity of the use of modern information and communication technologies, in particular in modern programming languages distance learning, for the formation of students' 21st century skills that are essential in the process of programming (it is skills such as self-organization and self-discipline, communication skills, teamwork skills etc.. It is pointed out the structural units of the training project in accordance with the use of distance learning technologies. It is described the general characteristics and the use of appropriate methods of modern information and communication technologies.

  8. Learning analytics approach of EMMA project

    NARCIS (Netherlands)

    Tammets, Kairit; Brouns, Francis

    2014-01-01

    The EMMA project provides a MOOC platform to aggregate and delivers massive open online courses (MOOC) in multiple languages from a variety of European universities. Learning analytics play an important role in MOOCs to support the individual needs of the learner.

  9. Lights, Camera, Project-Based Learning!

    Science.gov (United States)

    Cox, Dannon G.; Meaney, Karen S.

    2018-01-01

    A physical education instructor incorporates a teaching method known as project-based learning (PBL) in his physical education curriculum. Utilizing video-production equipment to imitate the production of a televisions show, sixth-grade students attending a charter school invited college students to share their stories about physical activity and…

  10. Enhancing Student Learning through Scaffolded Client Projects

    Science.gov (United States)

    Tomlinson, Elizabeth

    2017-01-01

    This article reports on the current status of client projects (CPs) in business communication courses, provides a scaffolded model for implementing CP, and assesses student learning in CPs. Using a longitudinal mixed method research design, survey data and qualitative materials from six semesters are presented. The instructor survey indicated need…

  11. CULTURE, CULTURE LEARNING AND NEW TECHNOLOGIES: TOWARDS A PEDAGOGICAL FRAMEWORK

    Directory of Open Access Journals (Sweden)

    Mike Levy

    2007-02-01

    Full Text Available This paper seeks to improve approaches to the learning and teaching of culture using new technologies by relating the key qualities and dimensions of the culture concept to elements within a pedagogical framework. In Part One, five facets of the culture concept are developed: culture as elemental; culture as relative; culture as group membership; culture as contested; and culture as individual (variable and multiple. Each perspective aims to provide a focus for thinking about culture, and thereby to provide a valid and useful point of departure for thinking about the practice of culture learning and teaching with new technologies. The referenced literature draws from a broad range of disciplines and definitions of culture. In Part Two, five projects are chosen to represent relevant technologies currently in use for culture learning: e-mail, chat, a discussion forum and a Web-based project. Each project is used to illustrate facets of the culture concept discussed in Part One with a view to identifying key elements within a pedagogical framework that can help us respond effectively to the challenge of culture learning and teaching utilising new technologies. Thus the goal is to align fundamental qualities of the culture concept with specific pedagogical designs, tasks and technologies.

  12. Teaching and learning English through digital game projects

    Directory of Open Access Journals (Sweden)

    Jonathan deHaan

    2011-04-01

    Full Text Available Digital games are receiving increasing attention by researchers and practitioners in education; however, most of the theory and pedagogy focus on general education or language and literacy development of native speakers. There are very few investigations of game play or game culture and second language development. Language teachers and institutions must know more about games to use the media effectively. Two completed extracurricular projects, based on constructionist learning and media literacy theories and practices, are described in this paper: game design and game magazine creation. The action research projects aimed to guide students towards a better understanding of games’ formal features and technologies through their active creation of games and game-related media, and to improve their spoken and written English language skills. In general, students learned and practised a variety of language and technology skills with the design projects. The projects motivated the students, challenged the students, and provided many opportunities for authentic discussions in the foreign language. Various suggestions, based on the teacher and student experiences of these projects, are made for other language teachers interested in conducting creative game-based projects with their students.

  13. Financing innovative technologies in wind projects

    International Nuclear Information System (INIS)

    Vaughan, C.

    2006-01-01

    Methods of market entry and the financing of new technologies were discussed from the perspective of Clipper Windpower, a wind energy company based in the northeastern United States and Canada. Many new technology companies only consider private equity when seeking financing for new product development. However, financing for projects and products is only the first step to market entry. Wind projects are the financial equivalent of a high yield bond with mechanical risk. Many wind power projects with company equity can also be seen as a long term bond with upside in any given year. It is therefore important for wind developers to seek out strategic buyers for both product development and project development, in addition to finding sources of private equity. Clipper Windpower Inc. has developed a partnership with British Petroleum (BP), who hold an equity interest in the company. Both companies are now partnering on projects with Clipper turbines, and firm orders are in place for 2007 and 2008. As a result of the partnership, Clipper now has increased its financial strength in cash flows, balance sheets, and projected revenue. It was concluded that a successful partnership can increase the scale of wind power development, and bring financial sophistication to smaller companies with limited resources. refs., tabs., figs

  14. ITADICT Project and Japanese Language Learning

    Directory of Open Access Journals (Sweden)

    MANTELLI, Alessandro

    2012-10-01

    Full Text Available This article aims to show how the Nuclear disaster in Fukushima (3 March 2011 affected Japanese Language teaching and learning in Italy, focusing on the ITADICT Project (Marcella Mariotti, project leader, Clemente Beghi, research fellow and Alessandro Mantelli, programmer. The project intends to develop the first Japanese-Italian online database, involving more than 60 students of Japanese language interested in lexicographic research and online learning strategies and tools. A secondary undertaking of ITADICT is its Latin alphabet transliteration of Japanese words into Hepburn style. ITADICT is inspired by EDICT Japanese-English database developed by the Electronic Dictionary Research and Development Group established in 2000 within the Faculty of Information Technology at Monash University. The Japanese-Italian database is evolving within the Department of Asian and North African Studies at Ca’ Foscari University of Venice, the largest in the country and one of the main teaching centres of Japanese in Europe in terms of the number of students dedicated to it (1800 and number of Japanese language teaching hours (1002h at B.A. level, and 387h at M.A. level. In this paper we will describe how and why the project has been carried out and what the expectations are for its future development.-----Pričujoči članek predstavlja projekt ITADICT (vodja projekta Marcella Mariotti, sodelujoči raziskovalec Clemente Beghi, programer Alessandro Mantelli in vpliv nuklearne katastrofe v Fukushimi 3. marca 2011 na učenje japonščine v Italiji. Cilj projekta je razvoj prve spletne japonsko-italijanske baze podatkov, pri njem pa sodeluje več kot 60 študentov japonščine, ki jih zanima slovaropisje in učne strategije ter orodja na spletu. Drugi cilj projekta ITADICT je prečrkovanje japonskih besed v latinico, po sistemu Hepburn. Projekt je zastavljen po vzoru japonsko-angleške podatkovne baze EDICT, ki jo je razvila skupina Electronic Dictionary

  15. The New Mexico Technology Deployment Pilot Project: A technology reinvestment project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The New Mexico Technology Deployment Project (NMTDP) has been in operation for slightly more than two years. As one of the original TRP projects, NMTDP had the charter to develop and validate a new model for technology extraction which emphasized focused technology collaboration, early industry involvement, and a strong dual use commercialization and productization emphasis. Taken in total, the first two years of the NMTDP have been exceptionally successful, surpassing the goals of the project. This report describes the accomplishments and evolution of the NMTDP to date and discusses the future potential of the project. Despite the end of federal funding, and a subsequent reduction in level of effort, the project partners are committed to continuation of the project.

  16. Personalized learning Ecologies in Problem and Project Based Learning Environments

    DEFF Research Database (Denmark)

    Rongbutsri, Nikorn; Ryberg, Thomas; Zander, Pär-Ola

    2012-01-01

    is in contrast to an artificial learning setting often found in traditional education. As many other higher education institutions, Aalborg University aims at providing learning environments that support the underlying pedagogical approach employed, and which can lead to different online and offline learning.......g. coordination, communication, negotiation, document sharing, calendars, meetings and version control. Furthermore, the pedagogical fabric of LMSs/VLEs have recently been called into question and critiqued by proponents of Personal Learning Environments (PLEs)(Ryberg, Buus, & Georgsen, 2011) . In sum....... making it important to understand and conceptualise students’ use of technology. Ecology is the study of relationship between organisms in an environment which is the set of circumstances surrounding that organism. Learning ecologies are the study of the relationship of a learner or a group of learners...

  17. Student Technology Use for Powerful Learning

    Science.gov (United States)

    Heidenrich, Carol

    2013-01-01

    Technology has evolved as a valuable information and communication tool. In our knowledge and information society, students with information and communication technology (ICT) competence will be prepared for success. Teacher pedagogy and student learning have to change to fully integrate technology into the curriculum. Students may not have…

  18. Strategy of nuclear power technology: learn from Korea experience

    International Nuclear Information System (INIS)

    Sriyana; Nurlaila

    2003-01-01

    Technology is one of the economic and social elements which play an important role in modernization process. When modernity ideas come into society, technology will become fundamental prerequisite for the shake of its form of modem economic social system of the society. Therefore, various effort modernize society involve program of transfer technology in main agenda. Purpose of this study is to choose a process of technology transfer and according to be able to reach for technological ability of nuclear power self-reliance. This research is conducted by study of existing literature, namely learn from experience of Korea which have succeeded to develop nuclear energy technology with self-reliance. While this research scope is to describe the process of technology transfer and according to be able to reach for technological ability of nuclear energy self-reliance. This study conclude that program of technology transfer have to start since nuclear power development pre-project period, project construction of NPP period and also in operation period. To reach for technological ability of self-reliance require to be done by long-term program and require to be build by several units which last for a transfer of technology. Government Commitment to have important role also have to be strong to push the happening of technology transfer. Institutions in concerned should have to be clear and hold responsible according to its interest. National industries as executor of technology transfer require to be given by larger ones opportunity in course of transfer this technology. (author)

  19. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  20. Cyrogenic Life Support Technology Development Project

    Science.gov (United States)

    Bush, David R.

    2015-01-01

    KSC has used cryogenic life support (liquid air based) technology successfully for many years to support spaceflight operations. This technology has many benefits unique to cryogenics when compared to traditional compressed gas systems: passive cooling, lighter, longer duration, and lower operating pressure. However, there are also several limiting factors that have prevented the technology from being commercialized. The National Institute of Occupational Safety and Health, Office of Mine Safety and Health Research (NIOSH-OMSHR) has partnered with NASA to develop a complete liquid air based life support solution for emergency mine escape and rescue. The project will develop and demonstrate various prototype devices and incorporate new technological innovations that have to date prevented commercialization.

  1. Learning Rationales and Virtual Reality Technology in Education.

    Science.gov (United States)

    Chiou, Guey-Fa

    1995-01-01

    Defines and describes virtual reality technology and differentiates between virtual learning environment, learning material, and learning tools. Links learning rationales to virtual reality technology to pave conceptual foundations for application of virtual reality technology education. Constructivism, case-based learning, problem-based learning,…

  2. Shippingport station decommissioning project technology transfer program

    International Nuclear Information System (INIS)

    Pasquini, L.A.

    1986-01-01

    The purpose of the Shippingport Station Decommissioning Project (SSDP) is to place the Shippingport Atomic Power Station in a long-term radiologically safe condition following defueling of the reactor, to perform decommissioning in such a manner as to demonstrate to the nuclear industry the application of decommissioning procedures to a large scale nuclear power plant, and to provide useful planning data for future decommissioning projects. This paper describes the Technology Transfer Program for collecting and archiving the decommissioning data base and its availability to the nuclear industry

  3. Modern technologies of e-learning

    Directory of Open Access Journals (Sweden)

    G. A. gyzy Mamedova

    2017-01-01

    Full Text Available E-learning constitutes a significant competition to traditional education in many countries and has become a major tool for the modernization of education and economic growth. For the development and implementation of successful e-learning systems, we need technologies that allow working with them for any number of users, providing a good learning environment. The article provides an overview of the technologies used in foreign universities for managing e-learning, such as 3D technologies in training programs, interactive technologies, personalization of learning using cloud computing and big data technologies. It is shown that today quite a large number of software and hardware development was created and introduced, implementing various mechanisms of introducing information technologies in the educational process. One of such developments is the use of adaptive technologies in the learning process, allowing the student to adapt to the training material, choose the suitable method of mastering the material, and adjust the intensity of training at different stages of the learning process. Another development of information technologies in education is the use of cloud computing, allowing access to educational resources for teachers, students, and managers of the education system. It was revealed that the use of cloud technologies leads to a significant decrease in material costs for the purchase of expensive equipment and software, educational content from the cloud can be accessed from any device (laptop, smartphone, tablet, etc. and at a convenient time for the learner, it is enough to have Internet connection and a browser. In the e-learning environment, there are many different types of data, both structured and unstructured, processing of which is difficult to implement using traditional statistical methods. For the processing of such data technologies of processing big data are used such as NoSQL and Hadoop. The article shows that the

  4. International Workshop on Evidence-Based Technology Enhanced Learning

    CERN Document Server

    Gennari, Rosella; Marenzi, Ivana; Prieta, Fernando; Rodríguez, Juan

    2012-01-01

    Research on Technology Enhanced Learning (TEL) investigates how information and communication technologies can be designed in order to support pedagogical activities. The workshop proceedings collects contributions concerning evidence based TEL systems, like their design following EBD principles as well as studies or best practices that educators, education stakeholders or psychologists used to diagnose or improve their students' learning skills, including students with specific difficulties. The international ebTEL’12 workshop wants to be a forum in which TEL researchers and practitioners alike can discuss ideas, projects, and lessons related to ebTEL. The workshop takes place in Salamanca, Spain, on March 28th-30th 2012.  

  5. Learning through a portfolio of carbon capture and storage demonstration projects

    Science.gov (United States)

    Reiner, David M.

    2016-01-01

    Carbon dioxide capture and storage (CCS) technology is considered by many to be an essential route to meet climate mitigation targets in the power and industrial sectors. Deploying CCS technologies globally will first require a portfolio of large-scale demonstration projects. These first projects should assist learning by diversity, learning by replication, de-risking the technologies and developing viable business models. From 2005 to 2009, optimism about the pace of CCS rollout led to mutually independent efforts in the European Union, North America and Australia to assemble portfolios of projects. Since 2009, only a few of these many project proposals remain viable, but the initial rationales for demonstration have not been revisited in the face of changing circumstances. Here I argue that learning is now both more difficult and more important given the slow pace of deployment. Developing a more coordinated global portfolio will facilitate learning across projects and may determine whether CCS ever emerges from the demonstration phase.

  6. [Information technology in learning sign language].

    Science.gov (United States)

    Hernández, Cesar; Pulido, Jose L; Arias, Jorge E

    2015-01-01

    To develop a technological tool that improves the initial learning of sign language in hearing impaired children. The development of this research was conducted in three phases: the lifting of requirements, design and development of the proposed device, and validation and evaluation device. Through the use of information technology and with the advice of special education professionals, we were able to develop an electronic device that facilitates the learning of sign language in deaf children. This is formed mainly by a graphic touch screen, a voice synthesizer, and a voice recognition system. Validation was performed with the deaf children in the Filadelfia School of the city of Bogotá. A learning methodology was established that improves learning times through a small, portable, lightweight, and educational technological prototype. Tests showed the effectiveness of this prototype, achieving a 32 % reduction in the initial learning time for sign language in deaf children.

  7. Spiral and Project-Based Learning with Peer Assessment in a Computer Science Project Management Course

    Science.gov (United States)

    Jaime, Arturo; Blanco, José Miguel; Domínguez, César; Sánchez, Ana; Heras, Jónathan; Usandizaga, Imanol

    2016-01-01

    Different learning methods such as project-based learning, spiral learning and peer assessment have been implemented in science disciplines with different outcomes. This paper presents a proposal for a project management course in the context of a computer science degree. Our proposal combines three well-known methods: project-based learning,…

  8. The Plasma Hearth Process Technology Development Project

    International Nuclear Information System (INIS)

    Geimer, R.; Batdorf, J.; Wolfe, P.

    1993-01-01

    The US DOE Office of Technology Development (OTD) is currently evaluating the Plasma Hearth Process (PHP) for potential treatment of several DOE waste types. The PHP is a high-temperature vitrification process that has potential application for a wide range of mixed waste types in both the low-level and transuranic mixed waste categories. The PHP is being tested under both the OTD Mixed Waste Integrated Program and the Buried Waste Integrated Demonstration. Initial testing has been completed on several different surrogate waste forms that are representative of some of the DOE mixed waste streams. Destruction of organic material exceeds that of conventional incineration technologies. The vitrified residual has leaching characteristics comparable to glass formulations produced in the high-level waste program. The first phase of the PHP demonstration project has been successfully completed, and the project is currently beginning a comprehensive second phase of development and testing

  9. National Security Technology Incubation Project Continuation Plan

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-09-30

    This document contains a project continuation plan for the National Security Technology Incubator (NSTI). The plan was developed as part of the National Security Preparedness Project (NSPP) funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This continuation plan describes the current status of NSTI (staffing and clients), long-term goals, strategies, and long-term financial solvency goals.The Arrowhead Center of New Mexico State University (NMSU) is the operator and manager of the NSTI. To realize the NSTI, Arrowhead Center must meet several performance objectives related to planning, development, execution, evaluation, and sustainability. This continuation plan is critical to the success of NSTI in its mission of incubating businesses with security technology products and services.

  10. Recommender Systems in Technology Enhanced Learning

    NARCIS (Netherlands)

    Manouselis, Nikos; Drachsler, Hendrik; Vuorikari, Riina; Hummel, Hans; Koper, Rob

    2010-01-01

    Manouselis, N., Drachsler, H., Vuorikari, R., Hummel, H. G. K., & Koper, R. (2011). Recommender Systems in Technology Enhanced Learning. In P. B. Kantor, F. Ricci, L. Rokach, & B. Shapira (Eds.), Recommender Systems Handbook (pp. 387-415). Berlin: Springer.

  11. Teacher Design Knowledge for Technology Enhanced Learning

    NARCIS (Netherlands)

    McKenney, Susan

    2014-01-01

    This presentation shares a framework for investigating the knowledge teachers need to be able to design technology-enhanced learning. Specific activities are undertaken to consider elements within the framework

  12. Applying Technology to Marine Corps Distance Learning

    National Research Council Canada - National Science Library

    Broihier, Michael

    1997-01-01

    The purpose of this thesis is to investigate the application of technology to distance learning with the intention of recommending to the Marine Corps a feasible migration path away from its current...

  13. Considerations upon the Machine Learning Technologies

    OpenAIRE

    Alin Munteanu; Cristina Ofelia Sofran

    2006-01-01

    Artificial intelligence offers superior techniques and methods by which problems from diverse domains may find an optimal solution. The Machine Learning technologies refer to the domain of artificial intelligence aiming to develop the techniques allowing the computers to “learn”. Some systems based on Machine Learning technologies tend to eliminate the necessity of the human intelligence while the others adopt a man-machine collaborative approach.

  14. Considerations upon the Machine Learning Technologies

    Directory of Open Access Journals (Sweden)

    Alin Munteanu

    2006-01-01

    Full Text Available Artificial intelligence offers superior techniques and methods by which problems from diverse domains may find an optimal solution. The Machine Learning technologies refer to the domain of artificial intelligence aiming to develop the techniques allowing the computers to “learn”. Some systems based on Machine Learning technologies tend to eliminate the necessity of the human intelligence while the others adopt a man-machine collaborative approach.

  15. Technology Integration and Technology Leadership in Schools as Learning Organizations

    Science.gov (United States)

    Cakir, Recep

    2012-01-01

    The purpose of this study was to investigate technology integration in primary schools from the perspective of leadership in learning organizations. To that end, the study examines two groups: school administrators who play effective roles in technology integration in schools and computer teachers who are mainly responsible for schools' technology…

  16. Lasers. Technology Learning Activity. Teacher Edition. Technology Education Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of laser technology. The guide uses a series of hands-on exploratory experiences into which activities to help students develop…

  17. Advanced Turbine Technology Applications Project (ATTAP)

    Science.gov (United States)

    1994-01-01

    Reports technical effort by AlliedSignal Engines in sixth year of DOE/NASA funded project. Topics include: gas turbine engine design modifications of production APU to incorporate ceramic components; fabrication and processing of silicon nitride blades and nozzles; component and engine testing; and refinement and development of critical ceramics technologies, including: hot corrosion testing and environmental life predictive model; advanced NDE methods for internal flaws in ceramic components; and improved carbon pulverization modeling during impact. ATTAP project is oriented toward developing high-risk technology of ceramic structural component design and fabrication to carry forward to commercial production by 'bridging the gap' between structural ceramics in the laboratory and near-term commercial heat engine application. Current ATTAP project goal is to support accelerated commercialization of advanced, high-temperature engines for hybrid vehicles and other applications. Project objectives are to provide essential and substantial early field experience demonstrating ceramic component reliability and durability in modified, available, gas turbine engine applications; and to scale-up and improve manufacturing processes of ceramic turbine engine components and demonstrate application of these processes in the production environment.

  18. Modern technologies in e-learning

    OpenAIRE

    Kubičková, Barbora

    2013-01-01

    This thesis is focused on the educational theories, forms of training, development and types of e - learning. Then there are mentioned new online educational technologies, pros and cons of on-line learning and its trends (gamification, social learning, MOOCs, etc.). This theoretical knowledge is necessary for understanding the principles of the on-line education and importance of massive open online courses. One part of the practical section concentrates on the results of a questionnaire rega...

  19. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering

  20. Teachers as Designers of Technology Enhanced Learning

    NARCIS (Netherlands)

    Kali, Yael; McKenney, Susan; Sagy, Ornit

    2015-01-01

    While the benefits of teacher involvement in designing technology enhanced learning are acknowledged in the literature, far less is known about shaping that involvement to yield those benefits. Research is needed to understand how teachers learn through design; how teacher design activities may be

  1. Teachers as Designers of Technology Enhanced Learning

    Science.gov (United States)

    Kali, Yael; McKenney, Susan; Sagy, Ornit

    2015-01-01

    While the benefits of teacher involvement in designing technology enhanced learning are acknowledged in the literature, far less is known about shaping that involvement to yield those benefits. Research is needed to understand how teachers learn through design; how teacher design activities may be supported; and how teacher involvement in design…

  2. Teachers as Designers of Technology Enhanced Learning

    NARCIS (Netherlands)

    Kali, Yael; McKenney, Susan; Sagy, Ornit

    2016-01-01

    While the benefits of teacher involvement in designing technology enhanced learning are acknowledged in the literature, far less is known about shaping that involvement to yield those benefits. Research is needed to understand how teachers learn through design; how teacher design activities may be

  3. Immersive Technologies and Language Learning

    Science.gov (United States)

    Blyth, Carl

    2018-01-01

    This article briefly traces the historical conceptualization of linguistic and cultural immersion through technological applications, from the early days of locally networked computers to the cutting-edge technologies known as virtual reality and augmented reality. Next, the article explores the challenges of immersive technologies for the field…

  4. Integrated System Health Management (ISHM) Technology Demonstration Project Final Report

    Science.gov (United States)

    Mackey, Ryan; Iverson, David; Pisanich, Greg; Toberman, Mike; Hicks, Ken

    2006-01-01

    Integrated System Health Management (ISHM) is an essential capability that will be required to enable upcoming explorations mission systems such as the Crew Exploration Vehicle (CEV) and Crew Launch Vehicle (CLV), as well as NASA aeronautics missions. However, the lack of flight experience and available test platforms have held back the infusion by NASA Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) of ISHM technologies into future space and aeronautical missions. To address this problem, a pioneer project was conceived to use a high-performance aircraft as a low-cost proxy to develop, mature, and verify the effectiveness of candidate ISHM technologies. Given the similarities between spacecraft and aircraft, an F/A-18 currently stationed at Dryden Flight Research Center (DFRC) was chosen as a suitable host platform for the test bed. This report describes how the test bed was conceived, how the technologies were integrated on to the aircraft, and how these technologies were matured during the project. It also describes the lessons learned during the project and a forward path for continued work.

  5. Projective Simulation compared to reinforcement learning

    OpenAIRE

    Bjerland, Øystein Førsund

    2015-01-01

    This thesis explores the model of projective simulation (PS), a novel approach for an artificial intelligence (AI) agent. The model of PS learns by interacting with the environment it is situated in, and allows for simulating actions before real action is taken. The action selection is based on a random walk through the episodic & compositional memory (ECM), which is a network of clips that represent previous experienced percepts. The network takes percepts as inpu...

  6. The Fernald Closure Project: Lessons Learned

    International Nuclear Information System (INIS)

    Murphy, Cornelius M.; Carr, Dennis

    2008-01-01

    For nearly 37 years, the U.S. Department of Energy site at Fernald - near Cincinnati, Ohio - produced 230,000 metric tons (250,000 short tons) of high-purity, low-enriched uranium for the U.S. Defense Program, generating more than 5.4 million metric tons (6 million short tons) of liquid and solid waste as it carried out its Cold War mission. The facility was shut down in 1989 and clean up began in 1992, when Fluor won the contract to clean up the site. Cleaning up Fernald and returning it to the people of Ohio was a $4.4 billion mega environmental-remediation project that was completed in October 2006. Project evolved through four phases: - Conducting remedial-investigation studies to determine the extent of damage to the environment and groundwater at, and adjacent to, the production facilities; - Selecting cleanup criteria - final end states that had to be met that protect human health and the environment; - Selecting and implementing the remedial actions to meet the cleanup goals; - Executing the work in a safe, compliant and cost-effective manner. In the early stages of the project, there were strained relationships - in fact total distrust - between the local community and the DOE as a result of aquifer contamination and potential health effects to the workers and local residents. To engage citizens and interested stakeholders groups in the decision-making process, the DOE and Fluor developed a public-participation strategy to open the channels of communication with the various parties: site leadership, technical staff and regulators. This approach proved invaluable to the success of the project, which has become a model for future environmental remediation projects. This paper will summarize the history and shares lessons learned: the completion of the uranium-production mission to the implementation of the Records of Decision defining the cleanup standards and the remedies achieved. Lessons learned fall into ten categories: - Regulatory approach with end

  7. Learning between projects: More than sending messages in bottles

    NARCIS (Netherlands)

    Hartmann, Andreas; Dorée, André

    2015-01-01

    Although learning from projects has gained much importance in research and practice, progress in understanding and improving inter-project learning appears to be slight. We argue that the adoption of a sender/receiver approach limits the learning effectiveness in project-based organisations. Drawing

  8. Learning to succeed in European joint projects: the role of the modern project manager--the flow-keeper.

    Science.gov (United States)

    Masiello, Italo

    2009-09-01

    The constellation of an EU-funded project-consortium is often of very disparate culture, languages, level of knowledge and technology, social competences, experiences, ideals and ambitions that may clash with one another. Hence, coordinating and managing successful European joint projects is not an easy task. This paper addresses the learning experience of managing international research projects and, through the author's own experience and literature review, attempts to exemplify the role of the flow-keeper--a modern project manager whose particular skills are to ensure the success of EU joint projects of considerable complexity. Propositions for developing the management of international joint projects are also provided.

  9. Toward Project-based Learning and Team Formation in Open Learning Environments

    NARCIS (Netherlands)

    Spoelstra, Howard; Van Rosmalen, Peter; Sloep, Peter

    2014-01-01

    Open Learning Environments, MOOCs, as well as Social Learning Networks, embody a new approach to learning. Although both emphasise interactive participation, somewhat surprisingly, they do not readily support bond creating and motivating collaborative learning opportunities. Providing project-based

  10. Problem and Project Based Learning in Hybrid Spaces

    DEFF Research Database (Denmark)

    Ryberg, Thomas; Davidsen, Jacob; Hodgson, Vivien

    2016-01-01

    There is a need within networked learning to understand and conceptualise the interplay between digital and physical spaces or what we could term hybrid spaces. Therefore, we discuss a recent study of students from two different programmes who are engaged in long-term, group-based problem...... and project based learning. Based on interviews, workshops and observations of students’ actual group practices in open, shared and flexible spaces in Aalborg University (AAU), we identify and discuss how students incorporate networked and digital technologies into their group work and into the study places...... they create for themselves. We describe how in one of the programmes ‘nomadic’ groups of students used different technologies and spaces for ‘placemaking’. We then show how their experience and approach to collaborative work differs to that of the more static or ‘artisan’ groups of students in the other...

  11. Technology Integration through Professional Learning Community

    Science.gov (United States)

    Cifuentes, Lauren; Maxwell, Gerri; Bulu, Sanser

    2011-01-01

    We describe efforts to build a learning community to support technology integration in three rural school districts and the contributions of various program strategies toward teacher growth. The Stages of Adoption Inventory, classroom observations, the Questionnaire for Technology Integration, interviews, STAR evaluation surveys, a survey of…

  12. MOOCs, High Technology, and Higher Learning

    Science.gov (United States)

    Rhoads, Robert A.

    2015-01-01

    In "MOOCs, High Technology, and Higher Learning," Robert A. Rhoads places the OpenCourseWare (OCW) movement into the larger context of a revolution in educational technology. In doing so, he seeks to bring greater balance to increasingly polarized discussions of massively open online courses (MOOCs) and show their ongoing relevance to…

  13. Designing Nordic Technology-Enhanced Learning

    Science.gov (United States)

    Cerratto-Pargman, Teresa; Jarvela, Sanna M.; Milrad, Marcelo

    2012-01-01

    The latest developments of information and communication technologies (ICT) and its large penetration in different sectors of our society pose new challenges and demands in the field of education. This special issue entitled "Designing Nordic technology-enhanced learning (TEL)", presents and discusses how researchers in the Nordic…

  14. Learning by cases in food technology

    DEFF Research Database (Denmark)

    Løje, Hanne

    2012-01-01

    The purpose of this paper is to evaluate the use of the method learning by cases for teaching food technology students at the technical university of Denmark (DTU) and to clarify if the method can be used to improve the motivation and make the students more active and thereby be more in control...... of their own learning process, to feel more secure and less frustrated. The applying of the learning by cases method at the food technology course can make the students to learn in a significantly way, where they will be more actively involved in the learning process than previous. The work with real life...... cases with engineering topics, can develop the students knowledge and understanding, which gives the students a more conceptual understanding of engineering tasks, and can improve their skills to analyze and deal with complex situations and furthermore to be more confident with the course curriculum....

  15. New technologies in teaching and learning

    Directory of Open Access Journals (Sweden)

    Eliane Vigneron Barreto Aguiar

    2010-05-01

    Full Text Available This article aims at analyzing the necessary changes in the classroom brought by the use of the New Information and Communication Technologies (NICT. The implementation of these technologies in educational settings demands a review of pedagogical practices in the classroom. Research on the influence of digital games on learning, the importance of virtual learning environments in distance education, and the use of Information and Communication Technologies as a way to promote digital inclusion for disabled people are also discussed in this article.

  16. BLENDED TECHNOLOGY IN LEARNING FOREIGN LANGUAGES

    Directory of Open Access Journals (Sweden)

    Natalia Alexandrovna Kameneva

    2013-11-01

    Full Text Available This article analyzes the use of information technologies in the context of a blended technology approach to learning foreign languages in higher education institutions. Distance learning tools can be categorized as being synchronous (webinar, video conferencing, case-technology, chat, ICQ, Skype, interactive whiteboards or asynchronous (blogs, forums, Twitter, video and audio podcasts, wikis, on-line testing. Sociological and psychological aspects of their application in the educational process are also considered.DOI: http://dx.doi.org/10.12731/2218-7405-2013-8-41

  17. Focus on Learning and Technology.

    Science.gov (United States)

    Kalkowski, Marsha A.

    2001-01-01

    Discusses results of a survey of Nebraska high school journalism teachers, their use of technology and their attitudes towards it. Discusses concerns about balancing technology and its uses and demands with the teaching of good writing and good journalism practices. Discusses negative scanners, buying a digital camera, and new image-editing…

  18. Autonomous Language Learning with Technology

    Science.gov (United States)

    Forsythe, Edward

    2013-01-01

    Japan's Ministry of Education, Culture, Sports, Science and Technology (MEXT) wants English language education to be more communicative. Japanese teachers of English (JTEs) need to adapt their instructional practices to meet this goal; however, they may not feel confident enough to teach speaking themselves. Using technology, JTEs have the ability…

  19. Collecting lessons learned : How project-based organizations in the oil and gas industry learn from their projects

    NARCIS (Netherlands)

    Buttler, T.

    2016-01-01

    Project-based organizations collect lessons learned in order to improve the performance of projects. They aim to repeat successes by using positive lessons learned, and to avoid repeating negative experiences by using negative lessons learned. Cooke-Davies (2002) claimed that the ability to learn

  20. A pilot project on non-conventional learning

    OpenAIRE

    Fernandes, Sara; Cerone, Antonio; Barbosa, L. S.

    2013-01-01

    This poster presents a pilot project on non-conventional learning strategies based on students’ active participation in real-life FLOSS projects. The aim of the project is to validate the hypothesis that the peer-production model, which underlies most FLOSS projects, can enhance the learning-teaching process based on extensive and systematic collaborative practices.

  1. Flexible Pedagogies: Technology-Enhanced Learning. Flexible Pedagogies: Preparing for the Future Series

    Science.gov (United States)

    Gordon, Neil

    2014-01-01

    This publication is part of our five-strand research project "Flexible Pedagogies: preparing for the future". It focuses on a better understanding of technology-enhanced learning (TEL) and: (1) identifies key international drivers in the move towards technology-enhanced learning; (2) highlights some of the challenges and opportunities…

  2. Incorporating Service-Learning, Technology, and Research Supportive Teaching Techniques into the University Chemistry Classroom

    Science.gov (United States)

    Saitta, E. K. H.; Bowdon, M. A.; Geiger, C. L.

    2011-01-01

    Technology was integrated into service-learning activities to create an interactive teaching method for undergraduate students at a large research institution. Chemistry students at the University of Central Florida partnered with high school students at Crooms Academy of Information Technology in interactive service learning projects. The…

  3. Integrated technology projects for rural communities

    Energy Technology Data Exchange (ETDEWEB)

    Forestier-Walker, C O

    1982-10-01

    Integrated Technology Projects (ITP) are set up so that they interact concurrently in ways that are compatible with local cultures, religions, traditions, and life styles. This management approach can take into account the low productivity of arid and semi-arid regions by increasing water, power, and fertilizer inputs in ways that will integrate their supply with other activities and minimize costs. The author illustrates how integrated agricultural, water and sanitation, energy, and housing modules can accomplish this. 1 reference, 4 figures, 5 tables. (DCK)

  4. Information technology project risk management in Peru

    OpenAIRE

    Del Carpio Gallegos, Javier

    2014-01-01

    This article shows how some principles, uses, and practices of risk management are applied in information technology projects in Peru; in the last four years, in representative sectors like manufacturing, banking, information and communications, academics institutions, construction, government, consulting, services, and others. El presente artículo muestra algunos principios, usos y prácticas de cómo la gestión de riesgos de proyectos de tecnología se ha llevado a cabo en los últimos cuatr...

  5. The role of professional objects in technology-enhanced learning environments in higher education

    NARCIS (Netherlands)

    Zitter, I.I.; Bruijn, E. de; Simons, P.R.J.; Cate, Th.J. ten

    2010-01-01

    We study project-based, technology-enhanced learning environments in higher education, which should produce, by means of specific mechanisms, learning outcomes in terms of transferable knowledge and learning-, thinking-, collaboration- and regulation-skills. Our focus is on the role of objects from

  6. Creating a Project-Based Learning Environment to Improve Project Management Skills of Graduate Students

    Science.gov (United States)

    Arantes do Amaral, Joao Alberto; Gonçalves, Paulo; Hess, Aurélio

    2015-01-01

    This article describes the project-based learning environment created to support project management graduate courses. The paper will focus on the learning context and procedures followed for 13 years, in 47 project-based learning MBA courses, involving approximately 1,400 students and 34 community partners.

  7. An introduction to learning technology in tertiary education in the UK.

    OpenAIRE

    Seale, Jane; Rius-Riu, Merce

    2001-01-01

    Contents: 1. The Learning Technology Arena 2. The Learning Technology Community 3. Learning Technology Tools 4. Key issues and developments in the Learning Technology Field 5. Implementing Learning Technologies 6. Further Resources

  8. INFORMATION TECHNOLOGIES IN MANAGEMENT OF ENERGY SAVING PROJECTS

    Directory of Open Access Journals (Sweden)

    Дмитро Валерійович МАРГАСОВ

    2015-06-01

    Full Text Available The information technology structure is considered of energy saving projects. The project management diagram of energy saving projects is developed, using GIS, ICS, BIM and other control and visual systems.

  9. Venture Leaders Prize for innovative technology projects

    CERN Multimedia

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  10. Dry Rod Consolidation Technology Project results

    International Nuclear Information System (INIS)

    Mullen, C.K.; Feldman, E.M; Vinjamuri, K.; Griebenow, B.L.; Lynch, R.J.; Arave, A.E.; Hill, R.C.

    1988-01-01

    The Dry Rod Consolidation Technology (DRCT) Project conducted at the Idaho National Engineering Laboratory (INEL), in 1987 demonstrated the technical feasibility of a dry horizontal fuel rod consolidation process. Fuel rods from Westinghouse 15 /times/ 15 pressurized water reactor (PWR) spent fuel assemblies were consolidated into canisters to achieve a 2:1 volume reduction ratio. The consolidation equipment was operated at an existing hot cell complex at the INEL. The equipment was specifically designed to interface with the existing facility fuel handling and operational capabilities and was instrumented to provide data collection for process technology research. During the operational phase, data were collected from observation of the consolidation process, fuel assembly handling, and fuel rod behavior and characteristics. Equipment performance was recorded and data measurements were compiled on crud and contamination generated and spread. Fuel assembly skeletons [non-fuel bearing components (NFBC)] were gamma scanned and analyzed for isotopic content and profile. The above data collection was enhanced by extensive photograph and video documentation. The loaded consolidation fuel canisters were utilized for a test of the Transnuclear, Inc. TN-24P dry storage cask with consolidated fuel. The NFBC material was stored for a future volume reduction demonstration project. 14 figs., 4 tabs

  11. Continuum of eLearning: 2012 Project Summary Report

    Science.gov (United States)

    2012-10-01

    multimedia, and Continuum of eLearning | Purpose and Vision 19 << UNCLASSIFIED>> (limited) situated learning. Future versions of the CoL self-paced...Continuum of eLearning : 2012 Project Summary Report Continuum of eLearning The Next Evolution of Joint Training on JKO October 2012 Joint...Technical Report November 2011 – August 2012 Continuum of eLearning : 2012 Project Summary Report N00140-06-D-0060 David T. Fautua, Sae Schatz, Andrea

  12. Project A+ Elementary Technology Demonstration Schools 1990-91. The First Year.

    Science.gov (United States)

    Marable, Paula; Frazer, Linda

    Project A+ Elementary Technology Demonstration Schools is a program made possible through grants from IBM (International Business Machines Corporation) and Apple, Inc. The primary purpose of the program is to demonstrate the educational effectiveness of technology in accelerating the learning of low achieving at-risk students and enhancing the…

  13. Learning from project experiences using a legacy-based approach

    Science.gov (United States)

    Cooper, Lynne P.; Majchrzak, Ann; Faraj, Samer

    2005-01-01

    As project teams become used more widely, the question of how to capitalize on the knowledge learned in project teams remains an open issue. Using previous research on shared cognition in groups, an approach to promoting post-project learning was developed. This Legacy Review concept was tested on four in tact project teams. The results from those test sessions were used to develop a model of team learning via group cognitive processes. The model and supporting propositions are presented.

  14. Robot technologies, autism and designs for learning

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    2015-01-01

    technologies involves several very different educational approaches to supporting young people’s learning and development. The paper discusses how robot technologies as learning resources have been related to the field of autism and education, and argues for a need to further expand the areas of application...... in the future, with a focus on children and young people diagnosed with autism spectrum disorders, their ICT interests and engagement in innovative and creative learning. The paper draws on international research and examples from the author’s own research into education for children and young people diagnosed...... with autism spectrum disorders, drawing on teachers’ and the students’ interests in working with ICT (e.g. robot technology)....

  15. Canadian Fusion Fuels Technology Project annual report 93/94

    International Nuclear Information System (INIS)

    1994-01-01

    The Canadian Fusion Fuels Technology Project exists to develop fusion technologies and apply them worldwide in today's advanced fusion projects and to apply these technologies in fusion and tritium research facilities. CFFTP concentrates on developing capability in fusion fuel cycle systems, in tritium handling technologies and in remote handling. This is an annual report for CFFTP and as such also includes a financial report

  16. Technological learning for carbon capture and sequestration technologies

    International Nuclear Information System (INIS)

    Riahi, Keywan; Rubin, Edward S.; Taylor, Margaret R.; Schrattenholzer, Leo; Hounshell, David

    2004-01-01

    This paper analyzes potentials of carbon capture and sequestration technologies (CCT) in a set of long-term energy-economic-environmental scenarios based on alternative assumptions for technological progress of CCT. In order to get a reasonable guide to future technological progress in managing CO 2 emissions, we review past experience in controlling sulfur dioxide (SO 2 ) emissions from power plants. By doing so, we quantify a 'learning curve' for CCT, which describes the relationship between the improvement of costs due to accumulation of experience in CCT construction. We incorporate the learning curve into the energy-modeling framework MESSAGE-MACRO and develop greenhouse gas emissions scenarios of economic, demographic, and energy demand development, where alternative policy cases lead to the stabilization of atmospheric CO 2 concentrations at 550 parts per million by volume (ppmv) by the end of the 21st century. We quantify three types of contributors to the carbon emissions mitigation: (1) demand reductions due to the increased price of energy, (2) fuel switching primarily away from coal, and (3) carbon capture and sequestration from fossil fuels. Due to the assumed technological learning, costs of the emissions reduction for CCT drop rapidly and in parallel with the massive introduction of CCT on the global scale. Compared to scenarios based on static cost assumptions for CCT, the contribution of carbon sequestration is about 50% higher in the case of learning, resulting in cumulative sequestration of CO 2 ranging from 150 to 250 billion (10 9 ) tons with carbon during the 21st century. Also, carbon values (tax) across scenarios (to meet the 550 ppmv carbon concentration constraint) are between 2% and 10% lower in the case of learning for CCT by 2100. The results illustrate that assumptions on technological change are a critical determinant of future characteristics of the energy system, indicating the importance of long-term technology policies in

  17. Life-Long Cyberlearning System: A Pilot Project for the "Learning Society" in the ROC.

    Science.gov (United States)

    Han, Huei-Wen; Wang, Yen-Chao

    1999-01-01

    Provides an overview of the implementation of lifelong learning in Taiwan, Republic of China (ROC) as part of its educational reform policy and describes a pilot project, the Lifelong Cyberlearning System. Highlights include planning architecture, Web-based learning technology, professional education, industrial and corporate assistance, and…

  18. Formation and Assessment of a Tool to Evaluate STEM Literacy in Service-Learning Projects

    Science.gov (United States)

    Hayford, Barbara; Blomstrom, Sally; Mumpower, Lori

    2015-01-01

    The purpose of the authors' research was to create a tool to evaluate science, technology, engineering, and mathematics (STEM) literacy in service-learning projects. The researchers posited that components of service-learning, which in this case included the deliverable and reflections, are examples of fundamental STEM literacy and thus can be…

  19. Using Project-Based Learning and Google Docs to Support Diversity

    Science.gov (United States)

    Leh, Amy

    2014-01-01

    A graduate course, ETEC543 ("Technology and Learning I"), was revised to better serve increasing new student population, international students, in an academic program. Project-based learning, Google Docs, and instructional strategies fostering diversity and critical thinking were incorporated into the course redesign. Observations,…

  20. Convergent and divergent learning in photovoltaic pilot projects and subsequent niche development

    NARCIS (Netherlands)

    Mierlo, van B.

    2012-01-01

    A proposed strategy to facilitate the use and development of radical new sustainable technologies is the creation of niches. Learning in these niches and the social embedding of learning experiences can stimulate changes in existing sociotechnological regimes. Pilot projects in which new

  1. Exploring Social Learning through Upstream Engagement in Science and Technology

    DEFF Research Database (Denmark)

    Mortensen, Jonas Egmose

    This discussion paper deliberates on how the concept of social learning can be used for evaluating upstream engagement initiatives in science and technology.  The paper briefly introduces to the concept of upstream engagement and a concrete case, the UK Citizen Science for Sustainability project...... (SuScit), as an outset for discussing how the concept of social learning can be used for analysing and understanding relations between citizen participation, Science and research, and sustainability. A number of relevant research questions and methodological considerations are distilled...

  2. Projection display technology and product trends

    Science.gov (United States)

    Kahn, Frederic J.

    1999-05-01

    Major technology and market trends that could generate a 20 billion dollar electronic projector market by 2010 are reviewed in the perspective of recent product introductions. A log linear analysis shows that the light outputs of benchmark transportable data video projectors have increased at a rate of almost 90 percent per year since 1993. The list prices of these same projectors have decreased at a rate of over 40 percent per year. The tradeoffs of light output vs. resolution and weight are illustrated. Recent trends in projector efficacy vs. year are discussed. Lumen output per dollar of list price is shown to be a useful market metric. Continued technical advances and innovations including higher throughput light valve technologies with integrated drivers, brighter light source, field sequential color, integrated- and micro-optical components, and aerospace materials are likely to sustain these trends. The new technologies will enable projection displays for entertainment and computer applications with unprecedented levels of performance, compactness, and cost-effectiveness.

  3. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  4. Geospatial Technologies and Geography Education in a Changing World : Geospatial Practices and Lessons Learned

    NARCIS (Netherlands)

    2015-01-01

    Book published by IGU Commission on Geographical Education. It focuses particularly on what has been learned from geospatial projects and research from the past decades of implementing geospatial technologies in formal and informal education.

  5. Simulation and New Learning Technologies.

    Science.gov (United States)

    Issenberg, S. Barry; Gordon, Michael S.; Gordon, David Lee; Safford, Robert E.; Hart, Ian R.

    2001-01-01

    In the future, virtual reality technology based initially on data from Visible Human Data sets will provide the majority of simulation-based training. Indicates that evidence-based outcomes must show these systems to be effective instruments for teaching and assessment, and medical educators must be willing to effect change in medical education to…

  6. The integrated project as a learning experience

    Directory of Open Access Journals (Sweden)

    Maria Angeles Antequera

    2012-03-01

    Full Text Available Florida is a higher education centre specialising in technical and business training. Postgraduate programs, university qualifications, vocational training, secondary education, further education, occupational training and languages are taught at Florida. An educational model in accordance with the demands of the European Higher Education Area has been designed, focussing on teaching for professional competencies. We have chosen to use a methodology which promotes the development of skills and abilities, it promotes participation and it is student-centric as s/he must look for knowledge him/herself thus connecting the educational and the real world. In the different university degrees taught in our centre, each year the student carries out a project set in a real context which integrates specific competencies from the course subject and develops transversal competencies associated with the project which are the purpose of planning and progressive learning: team work, effective communication, conflict resolution, leadership skills, innovation and creativity. The IP counts for 25% of each course in terms of objectives, scheduling and final evaluation. The project grade is an individual grade for each student and is the same for all subjects which form part of the project.

  7. Using technology to support science inquiry learning

    Directory of Open Access Journals (Sweden)

    P John Williams

    2017-03-01

    Full Text Available This paper presents a case study of a teacher’s experience in implementing an inquiry approach to his teaching over a period of two years with two different classes. His focus was on using a range of information technologies to support student inquiry learning. The study demonstrates the need to consider the characteristics of students when implementing an inquiry approach, and also the influence of the teachers level of understanding and related confidence in such an approach. The case also indicated that a range of technologies can be effective in supporting student inquiry learning.

  8. Technology-Mediated Learning for Resilience

    DEFF Research Database (Denmark)

    Sandvik, Kjetil; Majchrzak, Tim; Busch, Peter André

    , such as the successive outbreak of a pandemic. Due to the novelty of the topic, research particularly exists on theoretical aspects of resilience. Targeting learning – and thereby the local population – is a rather new emergence. To effectively reach, involve, and engage citizens, technology can play a key role. Based...... on four actual cases from communities we analyse the impact technology has on learning about resilience. We then scrutinize the effectiveness and propose future steps. Thereby, we seek to provide practical advice to local governments and to enrich the theory at the same time....

  9. Emerging Technologies for Autonomous Language Learning

    Directory of Open Access Journals (Sweden)

    Mark Warschauer

    2011-09-01

    Full Text Available Drawing on a lengthier review completed for the US National Institute for Literacy, this paper examines emerging technologies that are applicable to self-access and autonomous learning in the areas of listening and speaking, collaborative writing, reading and language structure, and online interaction. Digital media reviewed include podcasts, blogs, wikis, online writing sites, text-scaffolding software, concordancers, multiuser virtual environments, multiplayer games, and chatbots. For each of these technologies, we summarize recent research and discuss possible uses for autonomous language learning.

  10. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...... and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also...

  11. Expansive Learning in Construction Projects - a Contradiction in terms?

    DEFF Research Database (Denmark)

    Klitgaard, Anne; Nissen, Søren Bülow; Beck, Frederikke

    2016-01-01

    This research is a preliminary study performed as part of a primary research into expansive learning in interorganizational network set up to solve a construction project. The construction industry has long had issues about productivity, which can be an indication of lack of learning. A case study...... acquisition and participation but not by expansive learning. The construction industry needs to accept that the learning generated from projects will be limited to learning by acquisition and participation. The interorganizational network cannot facilitate expansive learning while working on object......-fixed projects. Research in construction management fails to generate and document knowledge because of the limitations of case studies....

  12. Learning about technology: Family vs. peer pairings

    Science.gov (United States)

    Heller, Patricia; Padilla, Michael; Hertel, Barbara; Olstad, Roger

    Recently a number of institutions have begun sponsoring nondeficit science and/or technology learning experiences for parents and their middle school-aged children which are intended to be enriching rather than remedial or compensatory in purpose. Very little research documenting the effects of parental involvement in the education of older children has been reported, however.The intent of this article was to present two studies designed to determine whether middle school-aged children's attitudes and content achievement are different when they take a technology course with their parents (parent-child treatment) or with their peers (child-child treatment). The first study focused on learning about communications technology (primarily telegraphs, telephones and radios); the second study focused on microcomputers.Results indicate that parents have little affect in helping their children learn the subject matter of technology courses. Likewise, parents do not affect children's attitudes toward computers. Both results were attenuated by the fact that the students in the studies were high achievers who were interested in and motivated to learn the subject matter, regardless of treatment. Significant differences were noted for computer literacy favoring the parent-child group, however. Parents also seemed to effect children's attitudes toward the subject matter of the courses.Further research needs to be done with less appealing course content or with less motivated students to fully determine the effect of parent-child and child groupings in science and technology courses.

  13. Project-Based Learning Not Just for STEM Anymore

    Science.gov (United States)

    Duke, Nell K.; Halvorsen, Anne-Lise; Strachan, Stephanie L.

    2016-01-01

    The popularity of project-based learning has been driven in part by a growing number of STEM schools and programs. But STEM subjects are not the only fertile ground for project-based learning (PBL). Social studies and literacy content, too, can be adapted into PBL units to benefit teaching and learning, the authors argue. They review key studies…

  14. The use of a mobile assistant learning system for health education based on project-based learning.

    Science.gov (United States)

    Wu, Ting-Ting

    2014-10-01

    With the development of mobile devices and wireless technology, mobile technology has gradually infiltrated nursing practice courses to facilitate instruction. Mobile devices save manpower and reduce errors while enhancing nursing students' professional knowledge and skills. To achieve teaching objectives and address the drawbacks of traditional education, this study presents a mobile assistant learning system to help nursing students prepare health education materials. The proposed system is based on a project-based learning strategy to assist nursing students with internalizing professional knowledge and developing critical thinking skills. Experimental results show that the proposed mobile system and project-based learning strategy can promote learning effectiveness and efficiency. Most nursing students and nursing educators showed positive attitudes toward this mobile learning system and looked forward to using it again in related courses in the future.

  15. Project based learning for reactor engineering education

    International Nuclear Information System (INIS)

    Narabayashi, Tadashi; Tsuji, Masashi; Shimazu, Yoichiro

    2009-01-01

    Trial in education of nuclear engineering in Hokkaido University has proved to be quite attractive for students. It is an education system called Project Based Learning (PBL), which is not based on education by lecture only but based mostly on practice of students in the classroom. The system was adopted four years ago. In the actual class, we separated the student into several groups of the size about 6 students. In the beginning of each class room time, a brief explanations of the related theory or technical bases. Then the students discuss in their own group how to precede their design calculations and do the required calculation and evaluation. The target reactor type of each group was selected by the group members for themselves at the beginning of the semester as the first step of the project. The reactor types range from a small in house type to that for a nuclear ship. At the end of the semester, each group presents the final design. The presentation experience gives students a kind of fresh sensation. Nowadays the evaluation results of the subject by the students rank in the highest in the faculty of engineering. Based on the considerations above, we designed the framework of our PBL for reactor engineering. In this paper, we will present some lessons learned in this PBL education system from the educational points of view. The PBL education program is supported by IAE/METI in Japan for Nuclear Engineering Education. (author)

  16. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-03-12

    Pacific Northwest National Laboratory researchers are working on the Columbia River Protection Supplemental Technologies Project. This project is a U. S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies, and technologies for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Technologies Project staff.

  17. Interconversion of Fischer and Zig-Zag Projections Learning ...

    Indian Academy of Sciences (India)

    IAS Admin

    Stereochemistry, conforma- tional analysis, hands-on learn- ing, Fischer projections, zig-zag projection, C–C bond rotations. Interconversion of Fischer and Zig-Zag Projections. Learning Stereochemistry with the Help of Hands. Visualization of molecules in three dimensions is an important aspect of organic chemistry.

  18. Evaluating Types of Students' Interactions in a Wiki-Based Collaborative Learning Project

    Science.gov (United States)

    Prokofieva, Maria

    2013-01-01

    Wiki technology has been promoted as a collaborative software platform. This study investigates interactions that occur in a wiki-based collaborative learning project. The study draws on interaction literature and investigates the types of interactions with which students are engaged in wiki-based group projects, clusters that reflect online…

  19. Immersive Learning Technologies: Realism and Online Authentic Learning

    Science.gov (United States)

    Herrington, Jan; Reeves, Thomas C.; Oliver, Ron

    2007-01-01

    The development of immersive learning technologies in the form of virtual reality and advanced computer applications has meant that realistic creations of simulated environments are now possible. Such simulations have been used to great effect in training in the military, air force, and in medical training. But how realistic do problems need to be…

  20. Electronic Learning in the German Science Project "NAWI-Interaktiv"

    Science.gov (United States)

    Wegner, Claas; Homann, Wiebke; Strehlke, Friederike

    2014-01-01

    The German science project "NAWI-Interaktiv" is an example of innovative use of E-Learning and new media education. Since 2009, the learning platform provides learners and teachers with high-quality learning tools, teaching material, useful information and E-learning programs for free. This is to raise the pupils' motivation to learn…

  1. Preschool Children's Learning with Technology at Home

    Science.gov (United States)

    Plowman, Lydia; Stevenson, Olivia; Stephen, Christine; McPake, Joanna

    2012-01-01

    We produced case studies of fourteen families based on nine rounds of data collection during the period from June 2008 to October 2009. We focused on fourteen children who were three years old when our visits started and used an ecocultural approach to examine their experiences of learning and playing with technologies at home. The study describes…

  2. Learning network theory : its contribution to our understanding of work-based learning projects and learning climate

    OpenAIRE

    Poell, R.F.; Moorsel, M.A.A.H. van

    1996-01-01

    This paper discusses the relevance of Van der Krogt's learning network theory (1995) for our understanding of the concepts of work-related learning projects and learning climate in organisations. The main assumptions of the learning network theory are presented and transferred to the level of learning groups in organisations. Four theoretical types of learning projects are distinguished. Four different approaches to the learning climate of work groups are compared to the approach offered by t...

  3. NASA's nuclear electric propulsion technology project

    International Nuclear Information System (INIS)

    Stone, J.R.; Sovey, J.S.

    1992-07-01

    The National Aeronautics and Space Administration (NASA) has initiated a program to establish the readiness of nuclear electric propulsion (NEP) technology for relatively near-term applications to outer planet robotic science missions with potential future evolution to system for piloted Mars vehicles. This program was initiated in 1991 with a very modest effort identified with nuclear thermal propulsion (NTP); however, NEP is also an integral part of this program and builds upon NASA's Base Research and Technology Program in power and electric propulsion as well as the SP-100 space nuclear power program. The NEP Program will establish the feasibility and practicality of electric propulsion for robotic and piloted solar system exploration. The performance objectives are high specific impulse (200 greater than I(sub sp) greater than 10000 s), high efficiency (over 0.50), and low specific mass. The planning for this program was initially focussed on piloted Mars missions, but has since been redirected to first focus on 100-kW class systems for relatively near-term robotic missions, with possible future evolution to megawatt-and multi-megawatt-class systems applicable to cargo vehicles supporting human missions as well as to the piloted vehicles. This paper reviews current plans and recent progress for the overall nuclear electric propulsion project and closely related activities. 33 refs

  4. Predicting User Acceptance of Collaborative Technologies: An Extension of the Technology Acceptance Model for E-Learning

    Science.gov (United States)

    Cheung, Ronnie; Vogel, Doug

    2013-01-01

    Collaborative technologies support group work in project-based environments. In this study, we enhance the technology acceptance model to explain the factors that influence the acceptance of Google Applications for collaborative learning. The enhanced model was empirically evaluated using survey data collected from 136 students enrolled in a…

  5. Exploring Mobile Technologies for Learning Chinese

    Directory of Open Access Journals (Sweden)

    Jing Wang

    2012-08-01

    Full Text Available The present study aimed to reveal how learners of Chinese as a foreign language use mobile technology to study Chinese outside the classroom. Researchers used sociocultural perspectives to frame the study and grounded theory to analyze data. Eleven English-speaking students who had learned Chinese for different years at a midwestern university participated in the study. They answered 23 major questions by submitting journal entries and participating in an interview. Compared with computer assisted language learning, mobile devices bring changes to tutorial functions, social computing, and gaming. Participants heavily explored tutorial functions, used mobile devices differently from computers for social computing, and showed interest in gaming. Although participants were enthusiastic about using mobile devices to learn Chinese, the number of applications they used and the variety of activities they engaged in were limited. Findings suggest that the effective incorporation of mobile devices to learn Chinese depends on collaboration and scaffolding

  6. Worldwide Overview of Lessons Learned from Decommissioning Projects

    International Nuclear Information System (INIS)

    Laraia, Michele

    2008-01-01

    With an increasing number of radioactive facilities and reactors now reaching the end of their useful life and being taken out of service, there is a growing emphasis worldwide on the safe and efficient decommissioning of such plants. There is a wealth of experience already gained in decommissioning projects for all kinds of nuclear facilities. It is now possible to compare and discuss progress and accomplishments worldwide. In particular, rather than on the factual descriptions of projects, technologies and case histories, it is important to focus on lessons learned: in this way, the return of experience is felt to effectively contribute to progress. Key issues - inevitably based on a subjective ranking - are presented in this paper. Through the exchange of lessons learned, it is possible to achieve full awareness of the need for resources for and constraints of safe and cost-effective decommissioning. What remains now is the identification of specific, remaining issues that may hinder or delay the smooth progress of decommissioning. To this end, lessons learned provide the necessary background information; this paper tries to make extensive use of practical experience gained by the international community

  7. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  8. Learning in renewable energy technology development

    International Nuclear Information System (INIS)

    Junginger, M.

    2005-01-01

    The main objectives of this thesis are: to investigate technological change and cost reduction for a number of renewable electricity technologies by means of the experience curve approach; to address related methodological issues in the experience curve approach, and, based on these insights; and to analyze the implications for achieving the Dutch renewable electricity targets for the year 2020 within a European context. In order to meet these objectives, a number of research questions have been formulated: What are the most promising renewable electricity technologies for the Netherlands until 2020 under different technological, economic and environmental conditions?; To what extent is the current use of the experience curve approach to investigate renewable energy technology development sound, what are differences in the utilization of this approach and what are possible pitfalls?; How can the experience curve approach be used to describe the potential development of partially new energy technologies, such as offshore wind energy? Is it possible to describe biomass fuel supply chains with experience curves? What are the possibilities and limits of the experience curve approach when describing non-modular technologies such as large (biomass) energy plants?; What are the main learning mechanisms behind the cost reduction of the investigated technologies?; and How can differences in the technological progress of renewable electricity options influence the market diffusion of renewable electricity technologies, and what implications can varying technological development and policy have on the implementation of renewable electricity technologies in the Netherlands? The development of different renewable energy technologies is investigated by means of some case studies. The possible effects of varying technological development in combination with different policy backgrounds are illustrated for the Netherlands. The thesis focuses mainly on the development of investment

  9. Big data technologies in e-learning

    Directory of Open Access Journals (Sweden)

    Gyulara A. Mamedova

    2017-01-01

    Full Text Available Recently, e-learning around the world is rapidly developing, and the main problem is to provide the students with quality educational information on time. This task cannot be solved without analyzing the large flow of information, entering the information environment of e-learning from participants in the educational process – students, lecturers, administration, etc. In this environment, there are a large number of different types of data, both structured and unstructured. Data processing is difficult to implement by traditional statistical methods. The aim of the study is to show that for the development and implementation of successful e-learning systems, it is necessary to use new technologies that would allow storing and processing large data streams.In order to store the big data, a large amount of disk space is required. It is shown that to solve this problem it is efficient to use clustered NAS (Network Area Storage technology, which allows storing information of educational institutions on NAS servers and sharing them with Internet. To process and personalize the Big Data in the environment of e-learning, it is proposed to use the technologies MapReduce, Hadoop, NoSQL and others. The article gives examples of the use of these technologies in the cloud environment. These technologies in e-learning allow achieving flexibility, scalability, availability, quality of service, security, confidentiality and ease of educational information use.Another important problem of e-learning is the identification of new, sometimes hidden, interconnection in Big Data, new knowledge (data mining, which can be used to improve the educational process and improve its management. To classify electronic educational resources, identify patterns of students with similar psychological, behavioral and intellectual characteristics, developing individualized educational programs, it is proposed to use methods of analysis of Big Data.The article shows that at

  10. Grandma's Games Project: Bridging Tradition and Technology Mediated Education

    Directory of Open Access Journals (Sweden)

    Marina Vasileva

    2014-02-01

    Full Text Available This article presents a project entitled "Grandma’s games", following a research idea to enrich the educational process of K9 students by introducing the traditional children games of our ancestors in the learning environment, revived and adapted for modern students with the aid of information and communication technology. While creating a strong connection between our heritage and the modern educational trends, the project’s intention goes beyond mere fulfilment of educational goals, striving to increase the interest and motivation of primary education students to develop their creativity and originality while learning, with respect of their own personal preferences and cultural heritage. The "Grandma’s games" research project engaged twelve traditional games in the educational activities at primary schools from both rural and non-rural environments in Republic of Macedonia. Descriptive statistics was applied on the data set sampled from the extensive survey conducted among teachers in these schools, to illustrate the benefits from the application of the Grandma’s games in educational process.

  11. Project Planning and Implementation: Lessons Learned From the AQBMP Project

    National Research Council Canada - National Science Library

    1997-01-01

    ...). This NSRP report is funded as an addendum to the Air Quality Best Management Practices (AQBMP) project (N1 -944). The AQBMP project was completed using an intensive project planning process using a variety of quality management tools...

  12. Visual technology for the autonomous learning of mathematics

    Directory of Open Access Journals (Sweden)

    Helmut Linneweber‐Lammerskitten

    2010-09-01

    Full Text Available This paper describes a collaborative research and development project between the University of Applied Sciences Northwestern Switzerland and Rhodes University in South Africa. The project seeks to establish, disseminate and research the efficacy and use of short video clips designed specifically for the autonomous learning of mathematics. Specific to the South African context is our interest in capitalising on the ubiquity of cellphone technology and the autonomous affordances offered by mobile learning. This paper engages with a number of theoretical and pedagogical issues relating to the design, production and use of these video clips. Although the focus is specific to the contexts of South Africa and Switzerland, the discussion is of broad applicability.

  13. The Dynamics of Project-Based Learning Extension Courses: The "Laboratory of Social Projects" Case Study

    Science.gov (United States)

    Arantes do Amaral, Joao Alberto

    2017-01-01

    In this case study we discuss the dynamics that drive a free-of-charge project-based learning extension course. We discuss the lessons learned in the course, "Laboratory of Social Projects." The course aimed to teach project management skills to the participants. It was conducted from August to November of 2015, at Federal University of…

  14. When Disruptive Approaches Meet Disruptive Technologies: Learning at a Distance.

    Science.gov (United States)

    Gibson, Chere Campbell

    2000-01-01

    Reviews research on constructivism in learning and selection of learning strategies. Suggests linking constructivism with instructional technologies for continuing medical education in order to "disrupt" reactive, habitual ways of learning and encourage active engagement. (SK)

  15. Distributed Collaborative Learning Communities Enabled by Information Communication Technology

    NARCIS (Netherlands)

    H.L. Alvarez (Heidi Lee)

    2006-01-01

    textabstractHow and why can Information Communication Technology (ICT) contribute to enhancing learning in distributed Collaborative Learning Communities (CLCs)? Drawing from relevant theories concerned with phenomenon of ICT enabled distributed collaborative learning, this book identifies gaps in

  16. Teaching Power Electronics with a Design-Oriented, Project-Based Learning Method at the Technical University of Denmark

    Science.gov (United States)

    Zhang, Zhe; Hansen, Claus Thorp; Andersen, Michael A. E.

    2016-01-01

    Power electronics is a fast-developing technology within the electrical engineering field. This paper presents the results and experiences gained from applying design-oriented project-based learning to switch-mode power supply design in a power electronics course at the Technical University of Denmark (DTU). Project-based learning (PBL) is known…

  17. ORGANIZATION OF FUTURE ENGINEERS' PROJECT-BASED LEARNING WHEN STUDYING THE PROJECT MANAGEMENT METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Halyna V. Lutsenko

    2015-02-01

    Full Text Available The peculiarities of modern world experience of implementation of project-based learning in engineering education have been considered. The potential role and place of projects in learning activity have been analyzed. The methodology of organization of project-based activity of engineering students when studying the project management methodology and computer systems of project management has been proposed. The requirements to documentation and actual results of students' projects have been described in detail. The requirements to computer-aided systems of project management developed by using Microsoft Project in the scope of diary scheduling and resources planning have been formulated.

  18. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  19. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  20. Integrating Adult Learning and Technologies for Effective Education: Strategic Approaches

    Science.gov (United States)

    Wang, Victor C. X.

    2010-01-01

    As adult learners and educators pioneer the use of technology in the new century, attention has been focused on developing strategic approaches to effectively integrate adult learning and technology in different learning environments. "Integrating Adult Learning and Technologies for Effective Education: Strategic Approaches" provides innovative…

  1. Lifelong Learning and its support with new technologies

    NARCIS (Netherlands)

    Kalz, Marco

    2014-01-01

    This chapter provides an overview about the use of new technologies for lifelong learning. While in the past learning technologies were mostly provided by educational institutions to support a specific lifetime or shorter learning episodes nowadays more personal technologies are used for lifelong

  2. Canadian Fusion Fuels Technology Project annual report 93/94

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The Canadian Fusion Fuels Technology Project exists to develop fusion technologies and apply them worldwide in today`s advanced fusion projects and to apply these technologies in fusion and tritium research facilities. CFFTP concentrates on developing capability in fusion fuel cycle systems, in tritium handling technologies and in remote handling. This is an annual report for CFFTP and as such also includes a financial report.

  3. Participatory Methods and UCA Project: understanding technologies as culture

    Directory of Open Access Journals (Sweden)

    Magda Pischetola

    2015-12-01

    Full Text Available Abstract In the complex and changing context of digital culture, the media become an important space of relation, as they have the crucial role of articulating new cultural logics that lead to disruptions in the school environment. To understand this change, new methods of analysis and research have been created, the so-called Participatory Methodologies. They are action research strategies aimed at intervening in a given social situation. In the analysis proposed here, such methodologies will help us to address the challenge of involving digital technologies in school culture, through the participation of different individuals involved. Two qualitative case studies about the project Um Computador por Aluno – the Brazilian One Laptop per Child -, carried out in 2012 in the schools of Santa Catarina and Bahia, are the first of two phases of the research presented. The results concern a "vertical" form of technology insertion in schools, which led to frustration and de-motivation at several levels. Starting from these considerations, the second stage of research proposes a pedagogical intervention in one of four schools in the field. The methodologies of participatory video and photography are chosen as possibilities of action-reflection-action on the sociocultural reality of students through the experience of sharing. The results show the importance of carrying out creative activities, appropriate to a social conception of learning, as well as the centrality of children and youth as agency and a broader need to redefine the relationship between teacher and student, in a more "horizontal" perspective process of teaching and learning. Keywords: Projeto UCA. Participatory Research Method. Innovative teaching-learning.

  4. Incorporating learning technologies into undergraduate radiography education

    International Nuclear Information System (INIS)

    Lorimer, Jenny; Hilliard, Alan

    2009-01-01

    Purpose: This study investigated the impact of integrating podcasts/audio file downloads and use of an electronic voting system (EVS) on a previously traditionally taught module. Both student (direct entry and mature) and staff satisfaction with the modified structure were evaluated. Method: An interim student evaluation was undertaken during the module, to provide formative data to the module leader about student opinion of the teaching methods and learning technologies. An end of module questionnaire was given to students and staff on the teaching team. Results: From the interim evaluation, given the option of returning to the traditional delivery method, 77.5% of students agreed that the module should continue to run in its blended format. The final evaluation discovered no differences in the behaviour of direct entry students compared to mature students. Both groups accessed the podcasts easily, generally at home, and spent longer studying than if blended learning technologies had not been used. It was discovered that 16% of the mature and 24% of the direct entry students would have preferred lectures to podcasts, although the students were positive about the flexibility offered. Both groups of students were virtually unanimous on the benefits of the EVS to support learning. Conclusion: The researchers concluded that the learning technologies did not create barriers for either student group, and that students' engagement with their learning and level of classroom interactivity were both increased when compared with the previous traditional delivery. The researchers are confident that the described combination of teaching delivery methods is a successful way of allowing small group work to continue with large cohorts.

  5. Project-Based Learning in Programmable Logic Controller

    Science.gov (United States)

    Seke, F. R.; Sumilat, J. M.; Kembuan, D. R. E.; Kewas, J. C.; Muchtar, H.; Ibrahim, N.

    2018-02-01

    Project-based learning is a learning method that uses project activities as the core of learning and requires student creativity in completing the project. The aims of this study is to investigate the influence of project-based learning methods on students with a high level of creativity in learning the Programmable Logic Controller (PLC). This study used experimental methods with experimental class and control class consisting of 24 students, with 12 students of high creativity and 12 students of low creativity. The application of project-based learning methods into the PLC courses combined with the level of student creativity enables the students to be directly involved in the work of the PLC project which gives them experience in utilizing PLCs for the benefit of the industry. Therefore, it’s concluded that project-based learning method is one of the superior learning methods to apply on highly creative students to PLC courses. This method can be used as an effort to improve student learning outcomes and student creativity as well as to educate prospective teachers to become reliable educators in theory and practice which will be tasked to create qualified human resources candidates in order to meet future industry needs.

  6. Teacher and Student Intrinsic Motivation in Project-Based Learning

    Science.gov (United States)

    Lam, Shui-fong; Cheng, Rebecca Wing-yi; Ma, William Y. K.

    2009-01-01

    In this study we examined the relationship between teacher and student intrinsic motivation in project-based learning. The participants were 126 Hong Kong secondary school teachers and their 631 students who completed evaluation questionnaires after a semester-long project-based learning program. Both teachers and students were asked to indicate…

  7. Change Project-Based Learning in Teacher Education in Botswana ...

    African Journals Online (AJOL)

    Environmental education (EE) and education for sustainable development (ESD) pedagogies are intricate, and to enhance learning, teacher education has to be innovative in teaching approach. This article investigates how the change project approach enhances project-based learning in practice. The investigation is ...

  8. Enhancing Integrative Motivation: The Japanese-American Collaborative Learning Project

    Science.gov (United States)

    Kato, Fumie

    2016-01-01

    The Collaborative Learning Project is a language exchange program in which American and Japanese university students have the opportunity to interact with native speakers over the course of a three-week period. This paper reports the outcomes of the Collaborative Learning Project in terms of its effectiveness in fulfilling student expectations and…

  9. Quantity versus Quality in Project Based Learning Practices

    NARCIS (Netherlands)

    A. Keegan (Anne); J.R. Turner (Rodney)

    2000-01-01

    textabstractIn the midst of the turbulence wrought by the global economy, it has become common to see projects as an essential medium for achieving change. However, project based learning practices - as a subset of organizational learning practices- have not kept pace with this development. To

  10. Systemwide Implementation of Project-Based Learning: The Philadelphia Approach

    Science.gov (United States)

    Schwalm, Jason; Tylek, Karen Smuck

    2012-01-01

    Citywide implementation of project-based learning highlights the benefits--and the challenges--of promoting exemplary practices across an entire out-of-school time (OST) network. In summer 2009, the City of Philadelphia and its intermediary, the Public Health Management Corporation (PHMC), introduced project-based learning to a network of more…

  11. The Advanced Linked Extended Reconnaissance & Targeting Technology Demonstration project

    Science.gov (United States)

    Edwards, Mark

    2008-04-01

    The Advanced Linked Extended Reconnaissance & Targeting (ALERT) Technology Demonstration (TD) project is addressing many operational needs of the future Canadian Army's Surveillance and Reconnaissance forces. Using the surveillance system of the Coyote reconnaissance vehicle as an experimental platform, the ALERT TD project aims to significantly enhance situational awareness by fusing multi-sensor and tactical data, developing automated processes, and integrating beyond line-of-sight sensing. The project is exploiting important advances made in computer processing capability, displays technology, digital communications, and sensor technology since the design of the original surveillance system. As the major research area within the project, concepts are discussed for displaying and fusing multi-sensor and tactical data within an Enhanced Operator Control Station (EOCS). The sensor data can originate from the Coyote's own visible-band and IR cameras, laser rangefinder, and ground-surveillance radar, as well as from beyond line-of-sight systems such as mini-UAVs and unattended ground sensors. Video-rate image processing has been developed to assist the operator to detect poorly visible targets. As a second major area of research, automatic target cueing capabilities have been added to the system. These include scene change detection, automatic target detection and aided target recognition algorithms processing both IR and visible-band images to draw the operator's attention to possible targets. The merits of incorporating scene change detection algorithms are also discussed. In the area of multi-sensor data fusion, up to Joint Defence Labs level 2 has been demonstrated. The human factors engineering aspects of the user interface in this complex environment are presented, drawing upon multiple user group sessions with military surveillance system operators. The paper concludes with Lessons Learned from the project. The ALERT system has been used in a number of C4ISR

  12. Learning Chinese Characters via Mobile Technology in a Primary School Classroom

    Science.gov (United States)

    Lu, Jie; Meng, Sue; Tam, Vincent

    2014-01-01

    This paper describes a project, including the design, development, and use of a mobile application (referred to as application hereafter) for learning Chinese as a second language in a bilingual primary school. The application was designed for iPod Touch Apple technology with the purpose to facilitate learning of a fundamental set of 200 Chinese…

  13. Using Qualitative Research to Assess Teaching and Learning in Technology-Infused TILE Classrooms

    Science.gov (United States)

    Van Horne, Sam; Murniati, Cecilia Titiek; Saichaie, Kem; Jesse, Maggie; Florman, Jean C.; Ingram, Beth F.

    2014-01-01

    This chapter describes the results of an assessment project whose purpose was to improve the faculty-development program for instructors who teach in technology-infused TILE (Transform, Interact, Learn, Engage) classrooms at the University of Iowa. Qualitative research methods were critical for (1) learning about how students and instructors…

  14. Teachers' Knowing How to Use Technology: Exploring a Conceptual Framework for Purposeful Learning Activity

    Science.gov (United States)

    Fisher, Tony; Denning, Tim; Higgins, Chris; Loveless, Avril

    2012-01-01

    This article describes a project to apply and validate a conceptual framework of clusters of purposeful learning activity involving ICT tools. The framework, which is based in a socio-cultural perspective, is described as "DECK", and comprises the following major categories of the use of digital technologies to support learning:…

  15. "A Dance with the Butterflies:" A Metamorphosis of Teaching and Learning through Technology

    Science.gov (United States)

    McPherson, Sarah

    2009-01-01

    This paper describes a web-based collaborative project called "A Dance with the Butterflies" that applied the brain-based research of the Center for Applied Special Technologies (CAST) and principles of Universal Design for Learning (UDL) to Pre-K-4 science curriculum. Learning experiences were designed for students to invoke the Recognition,…

  16. Follow-groups, Enhancing Learning Potential at Project Exams

    DEFF Research Database (Denmark)

    Tollestrup, Christian H. T.

    2016-01-01

    In the Problem Based, Project Oriented Learning Program of Industrial Design Engineering at AAU students work and are examined/evaluated in groups. Following a period of a 6 years of ban on group-based exams by the government, the return of the group-based exam at Universities in 2014 has...... and the supervisor. Having the group based exam re-introduced sparked the interest for even further utilizing the exam situation for enhancing the learning outcome for each project and at the same time promote a more open atmosphere. Can the students learn even more and/or put their own project learning...... into perspective by seeing other project exams? So in order to investigate whether there was a possibility to further enhance the learning potential and understanding of the learning outcome the study board for the Architecture & Design program opened for a trial period for 2 semesters for voluntarily organizing...

  17. Teaching Project Management On-Line: Lessons Learned from MOOCs

    Science.gov (United States)

    Falcao, Rita; Fernandes, Luis

    2016-01-01

    Creating a course for teaching project management online in a full online distance-learning environment was a challenge. Working with adult learners from different continents that want to complete a Master degree was an additional challenge. This paper describes how different MOOCs were used to learn about teaching -(meta) e-learning. MOOCs…

  18. Development and Assessment of Service Learning Projects in General Biology

    Science.gov (United States)

    Felzien, Lisa; Salem, Laura

    2008-01-01

    Service learning involves providing service to the community while requiring students to meet learning goals in a specific course. A service learning project was implemented in a general biology course at Rockhurst University to involve students in promoting scientific education in conjunction with community partner educators. Students were…

  19. Implementing Project Based Learning Approach to Graphic Design Course

    Science.gov (United States)

    Riyanti, Menul Teguh; Erwin, Tuti Nuriah; Suriani, S. H.

    2017-01-01

    The purpose of this study was to develop a learning model based Commercial Graphic Design Drafting project-based learning approach, was chosen as a strategy in the learning product development research. University students as the target audience of this model are the students of the fifth semester Visual Communications Design Studies Program…

  20. Collaborative Learning in Advanced Supply Systems: The KLASS Pilot Project.

    Science.gov (United States)

    Rhodes, Ed; Carter, Ruth

    2003-01-01

    The Knowledge and Learning in Advanced Supply Systems (KLASS) project developed collaborative learning networks of suppliers in the British automotive and aerospace industries. Methods included face-to-face and distance learning, work toward National Vocational Qualifications, and diagnostic workshops for senior managers on improving quality,…

  1. Construction Project Performance Improvement through Radio Frequency Identification Technology Application on a Project Supply Chain

    Science.gov (United States)

    Wang, Heng

    2017-01-01

    Construction project productivity typically lags other industries and it has been the focus of numerous studies in order to improve the project performance. This research investigated the application of Radio Frequency Identification (RFID) technology on construction projects' supply chain and determined that RFID technology can improve the…

  2. A Large Scale Problem Based Learning inter-European Student Satellite Construction Project

    DEFF Research Database (Denmark)

    Nielsen, Jens Frederik Dalsgaard; Alminde, Lars; Bisgaard, Morten

    2006-01-01

    that electronic communication technology was vital within the project. Additionally the SSETI EXPRESS project implied the following problems it didn’t fit to a standard semester - 18 months for the satellite project compared to 5/6 months for a “normal” semester project. difficulties in integrating the tasks......A LARGE SCALE PROBLEM BASED LEARNING INTER-EUROPEAN STUDENT SATELLITE CONSTRUCTION PROJECT This paper describes the pedagogical outcome of a large scale PBL experiment. ESA (European Space Agency) Education Office launched January 2004 an ambitious project: Let students from all over Europe build....... The satellite was successfully launched on October 27th 2005 (http://www.express.space.aau.dk). The project was a student driven project with student project responsibility adding at lot of international experiences and project management skills to the outcome of more traditional one semester, single group...

  3. Educating Urban Designers using Augmented Reality and Mobile Learning Technologies

    Directory of Open Access Journals (Sweden)

    Ernest Redondo

    2017-03-01

    Full Text Available This paper describes an educational experience using augmented reality (AR on mobile devices as a  tool for learning urban design concepts and specifically for architecture degree students. In a real project-based exercise, the participants had to design a sculpture to be placed in a public space, checking the suitability of the object as for example the form, scale, location, materials, etc., and taking into account the surroundings. The project is controlled on-site using AR on mobile platforms, encouraging collaborative learning by sharing the 3D models of their proposals, and acting both as producers and consumers of AR content in the process. To assess both the usability of technology, as well as the learning improvement, the class was divided into two groups with equivalent pre-course grades: a control group, who followed the conventional course in the laboratory, and a test group, who used AR technology. At the end of the course, the AR-using group showed a significant increase in academic performance, higher motivation and satisfaction compared to the control group.

  4. 2017 NMC Technology Outlook for Nordic Schools A Horizon Project Regional Report

    DEFF Research Database (Denmark)

    2017-01-01

    research effort between the New Media Consortium (NMC) and the Norwegian Centre for ICT in Education to inform Nordic school leaders and decision-makers about significant developments in technologies supporting teaching, learning, and creative inquiry in primary and secondary education across Denmark......Adams Becker, S., Cummins, M., Freeman, A., and Rose, K. (2017). 2017 NMC Technology Outlook for Nordic Schools: A Horizon Project Regional Report. Austin, Texas: The New Media Consortium. The 2017 NMC Technology Outlook for Nordic Schools: A Horizon Project Regional Report reflects a collaborative...

  5. DEVELOPMENT MODEL OF PATISSERIE PROJECT-BASED LEARNING

    OpenAIRE

    Ana Ana; Lutfhiyah Nurlaela

    2013-01-01

    The study aims to find a model of patisserie project-based learning with production approach that can improve effectiveness of patisserie learning. Delphi Technique, Cohen's Kappa and percentages of agreements were used to assess model of patisserie project based learning. Data collection techniques employed in the study were questionnaire, check list worksheet, observation, and interview sheets. Subjects were 13 lectures of expertise food and nutrition and 91 students of Food and Nutrition ...

  6. Propulsive Descent Technologies (PDT): Original Content Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Future missions to Mars require landed mass that exceeds the capability of current entry, descent, and landing technology.  New technology and techniques are...

  7. River Protection Project Technology and Innovation Roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

    2017-08-14

    The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

  8. Project based learning in organizations: towards a methodology for learning in groups

    NARCIS (Netherlands)

    Poell, R.F.; Krogt, F.J. van der

    2003-01-01

    This article introduces a methodology for employees in organizations to set up and carry out their own group learning projects. It is argued that employees can use project-based learning to make their everyday learning more systematic at times, without necessarily formalizing it. The article

  9. How Teaching Science Using Project-Based Learning Strategies Affects the Classroom Learning Environment

    Science.gov (United States)

    Hugerat, Muhamad

    2016-01-01

    This study involved 458 ninth-grade students from two different Arab middle schools in Israel. Half of the students learned science using project-based learning strategies and the other half learned using traditional methods (non-project-based). The classes were heterogeneous regarding their achievements in the sciences. The adapted questionnaire…

  10. Project-based learning in organizations : Towards a methodology for learning in groups

    NARCIS (Netherlands)

    Poell, R.F.; van der Krogt, F.J.

    2003-01-01

    This article introduces a methodology for employees in organizations to set up and carry out their own group learning projects. It is argued that employees can use project-based learning to make their everyday learning more systematic at times, without necessarily formalizing it. The article

  11. The German Chernobyl project: Lessons learned

    International Nuclear Information System (INIS)

    Hill, P.; Hille, R.

    1999-01-01

    This report presents results and lessons learned by one of the so far largest assessments of a post-accidental situation. Funded by the Federal Republic of Germany the German Chernobyl Project investigated in the years 1991-1993 the radiological situation in contaminated regions of the Russian Federation, Belarus and Ukraine. Measurements included a mass screening of the population in order to determine the Cesium body burdens of 250,000+ individuals in more than 240 settlements as well as the evaluation of external doses in selected settlements with soil contaminations varying from less than 74 kBq/m 2 to about 3700 kBq/m 2 including some, where decontamination measures had previously been taken. Also in many settlements environmental monitoring was undertaken. For most individuals doses did not exceed the international annual limits set for the general population. Open and comprehensive communication of results was favourably accepted by the public. In a few settlements the radiological situation has been followed up till to date. (author)

  12. Space technology and robotics in school projects

    Science.gov (United States)

    Villias, Georgios

    2016-04-01

    Space-related educational activities is a very inspiring and attractive way to involve students into science courses, present them the variety of STEM careers that they can follow, while giving them at the same time the opportunity to develop various practical and communication skills necessary for their future professional development. As part of a large scale extracurricular course in Space Science, Space Technology and Robotics that has been introduced in our school, our students, divided in smaller groups of 3-4 students in each, try to understand the challenges that current and future space exploration is facing. Following a mixture of an inquiry-based learning methodology and hands-on practical activities related with constructions and experiments, students get a glimpse of the pre-mentioned fields. Our main goal is to gain practical knowledge and inspiration from the exciting field of Space, to attain an adequate level of team spirit and effective cooperation, while developing technical and research data-mining skills. We use the following two approaches: 1. Constructive (Technical) approach Designing and constructing various customized robotic machines, that will simulate the future space exploration vehicles and satellites needed to study the atmosphere, surface and subsurface of planets, moons or other planetary bodies of our solar system that have shown some promising indications for the existence of life, taking seriously into account their special characteristics and known existing conditions (like Mars, Titan, Europa & Enceladus). The STEM tools we use are the following: - LEGO Mindstorms: to construct rovers for surface exploration. - Hydrobots: an MIT's SeaPerch program for the construction of submarine semi-autonomous robots. - CanSats: Arduino-based microsatellites able to receive, record & transmit data. - Space balloons: appropriate for high altitude atmospheric measurements & photography. 2. Scientific approach Conducting interesting physics

  13. Lessons Learned from Client Projects in an Undergraduate Project Management Course

    Science.gov (United States)

    Pollard, Carol E.

    2012-01-01

    This work proposes that a subtle combination of three learning methods offering "just in time" project management knowledge, coupled with hands-on project management experience can be particularly effective in producing project management students with employable skills. Students were required to apply formal project management knowledge to gain…

  14. Research Project Evaluation-Learnings from the PATHWAYS Project Experience.

    Science.gov (United States)

    Galas, Aleksander; Pilat, Aleksandra; Leonardi, Matilde; Tobiasz-Adamczyk, Beata

    2018-05-25

    Every research project faces challenges regarding how to achieve its goals in a timely and effective manner. The purpose of this paper is to present a project evaluation methodology gathered during the implementation of the Participation to Healthy Workplaces and Inclusive Strategies in the Work Sector (the EU PATHWAYS Project). The PATHWAYS project involved multiple countries and multi-cultural aspects of re/integrating chronically ill patients into labor markets in different countries. This paper describes key project's evaluation issues including: (1) purposes, (2) advisability, (3) tools, (4) implementation, and (5) possible benefits and presents the advantages of a continuous monitoring. Project evaluation tool to assess structure and resources, process, management and communication, achievements, and outcomes. The project used a mixed evaluation approach and included Strengths (S), Weaknesses (W), Opportunities (O), and Threats (SWOT) analysis. A methodology for longitudinal EU projects' evaluation is described. The evaluation process allowed to highlight strengths and weaknesses and highlighted good coordination and communication between project partners as well as some key issues such as: the need for a shared glossary covering areas investigated by the project, problematic issues related to the involvement of stakeholders from outside the project, and issues with timing. Numerical SWOT analysis showed improvement in project performance over time. The proportion of participating project partners in the evaluation varied from 100% to 83.3%. There is a need for the implementation of a structured evaluation process in multidisciplinary projects involving different stakeholders in diverse socio-environmental and political conditions. Based on the PATHWAYS experience, a clear monitoring methodology is suggested as essential in every multidisciplinary research projects.

  15. Critical success factors in information technology projects

    Directory of Open Access Journals (Sweden)

    Ayesha

    2017-02-01

    Full Text Available The purpose of this study is to determine the critical success factors (CSF of IT projects in Pa-kistan. The identified factors cannot only be functional to exact type IT projects but also to all types of IT projects, their success directly affects the achievement of whole organization. The proposed study of this paper has determined 15 factors influencing the most on the success of IT projects through multiple regression analysis. The survey has disclosed that many CSFs were found related to IT projects but these 15 factors are also the backbone of IT projects. The re-search results obtained clearly indicated that the Leadership Qualities played a significant role in obtaining Top Management support in order to access to resources however, the Leadership Qualities did not play any role on the trained and capable Project Team Members. Besides, it is undoubtedly defined effective communication of the project was established to be influential on the conclusion and contributing factor towards the Success of IT projects in Pakistan. Top Man-agement Support as a whole was not found to play a key role in the IT Project Success.

  16. PROJECT BASED LEARNING BERMUATAN ETNOMATEMATIKA DALAM PEMBELAJAR MATEMATIKA

    Directory of Open Access Journals (Sweden)

    I Wayan Eka Mahendra

    2017-03-01

    Full Text Available This study aims to determine differences simultaneously in motivation and mathematics learning outcomes between students taking project based learningmodel charged ethnomathematics and students who followed the conventional learning modelon the class VIII SMP Negeri 3 Abiansemalyear 2016/2017. It was a quasi experiment with a sample of 71 student obtain by using simple random sampling. The data were analyzed by one-way multivariate analysis (Manova.The results of this study indicate that there are differences in simultaneously in learning motivation and learning outcomes between students taking mathematics model project based learning charged ethnomathematics and students who followed the conventional learning model on the class VIII SMP Negeri 3 Abiansemal year 2016/2017. Besed on the research findings, junior high school teachers are suggested to improve their student learning outcome for mathematics. Teachers also need to use a learning models accurately and correctly.

  17. The process of selecting technology development projects: a practical framework

    NARCIS (Netherlands)

    Herps, Joost M.J.; van Mal, Herman H.; Halman, Johannes I.M.; Martens, Jack H.M.; Borsboom, Ron H.M.

    2003-01-01

    In this article a practical framework is proposed, that can be used to organise the activities related to the selection-process of technology development projects. The framework is based upon recent literature and application at DAF Trucks Company. A technology development project has a long way to

  18. The process of selecting technology development projects : a practical framework

    NARCIS (Netherlands)

    Herps, J.M.J.; Mal, van H.H.; Halman, J.I.M.; Martens, J.H.M.; Borsboom, R.H.M.

    2003-01-01

    In this article a practical framework is proposed, that can be used to organise the activities related to the selection-process of technology development projects. The framework is based upon recent literature and application at DAF Trucks Company. A technology development project has a long way to

  19. Next Generation Launch Technology Program Lessons Learned

    Science.gov (United States)

    Cook, Stephen; Tyson, Richard

    2005-01-01

    In November 2002, NASA revised its Integrated Space Transportation Plan (ISTP) to evolve the Space Launch Initiative (SLI) to serve as a theme for two emerging programs. The first of these, the Orbital Space Plane (OSP), was intended to provide crew-escape and crew-transfer functions for the ISS. The second, the NGLT Program, developed technologies needed for safe, routine space access for scientific exploration, commerce, and national defense. The NGLT Program was comprised of 12 projects, ranging from fundamental high-temperature materials research to full-scale engine system developments (turbine and rocket) to scramjet flight test. The Program included technology advancement activities with a broad range of objectives, ultimate applications/timeframes, and technology maturity levels. An over-arching Systems Engineering and Analysis (SE&A) approach was employed to focus technology advancements according to a common set of requirements. Investments were categorized into three segments of technology maturation: propulsion technologies, launch systems technologies, and SE&A.

  20. Tapping Technology in Creating Product Development Studies: Reflections on an ESP-Business Project

    Science.gov (United States)

    Yeh, Aiden

    2015-01-01

    This paper describes a teacher's reflections on a technology-enhanced project-based learning approach to teaching an ESP-business lesson on product development, which is part of the curriculum for Conference English and Meetings Practice (CEMP), a business-track course for the Adult Continuing Education program at a private university in southern…

  1. Consider outsourcing IT projects when cutting-edge technology, specialized focus are needed.

    Science.gov (United States)

    1999-05-01

    Looking outside to meet information technology needs proves a smart way to avert extra staffing costs. Kaiser Permanente saves thousands each year by contracting out cutting-edge IT projects instead of hiring more full-time staff it doesn't need. Learn how the organization incorporates outsourcing and other temporary work methods into its IT staffing strategy.

  2. Using Educational Technology as an Institutional Teaching and Learning Improvement Strategy?

    Science.gov (United States)

    Stoddart, Patrick

    2015-01-01

    Increasingly, educational technology is identified as crucial to addressing many scale issues around higher education learning and teaching. However, such projects are often run with the technical project goals achieved but the educational goals unrealised. Further, in an age of austerity, all investments must be closely scrutinised as to their…

  3. Evaluation of Representative Smart Grid Investment Project Technologies: Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Prakash Kumar, Nirupama; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of a limited number of demand response technologies and implementations deployed in the SGIG projects.

  4. Creating Educational Technology Curricula for Advanced Studies in Learning Technology

    Directory of Open Access Journals (Sweden)

    Minoru Nakayama

    2016-08-01

    Full Text Available Curriculum design and content are key factors in the area of human resource development. To examine the possibility of using a collaboration of Human Computer Interaction (HCI and Educational Technology (ET to develop innovative improvements to the education system, the curricula of these two areas of study were lexically analyzed and compared. As a further example, the curriculum of a joint course in HCI and ET was also lexically analyzed and the contents were examined. These analyses can be used as references in the development of human resources for use in advanced learning environments.

  5. THE BENEFITS OF THE E-LEARNING AGRICULTURAL PROJECT KISSANKERALA TO DIGITAL IMMIGRANTS AND DIGITAL NATIVES

    Directory of Open Access Journals (Sweden)

    Manoj ROY. V.

    2013-04-01

    Full Text Available In recent times Information and Communication Technology (ICT has been able to make inroads into the ways information is disseminated among those involved in direct farming and farming related enterprises. This paper arose from a two-year study of the KissanKerala, the e-learning project underway in Kerala, a small state in India. It is more conspicuous when we learn that the KissanKerala project is able to disseminate agricultural information also among digital immigrants. Since 2003, the KissanKerala has been providing advisory services to the farming community in Kerala using a combination of technologies. Salient features of the project are discussed. Noteworthy are its interactive web portal and the online agri-video channel that uses the video sharing platform of YouTube. In this paper, we look at the e-learning strategies adopted; virtual learning environments created and also discuss participative tools used for communication. We have also made an impact-study of the project with a large number of beneficiaries. We learn that the Kissan Kerala is one of the most successful learning projects undertaken in distance mode in India.

  6. The Effect of STEM Learning through the Project of Designing Boat Model toward Student STEM Literacy

    Science.gov (United States)

    Tati, T.; Firman, H.; Riandi, R.

    2017-09-01

    STEM Learning focusses on development of STEM-literate society, the research about implementation of STEM learning to develope students’ STEM literacy is still limited. This study is aimed to examine the effect of implementation STEM learning through the project of designing boat model on students STEM literacy in energy topic. The method of this study was a quasi-experiment with non-randomized pretest-posttest control group design. There were two classes involved, the experiment class used Project Based Learning with STEM approach and control class used Project-Based Learning without STEM approach. A STEM Literacy test instrument was developed to measure students STEM literacy which consists of science literacy, mathematics literacy, and technology-engineering literacy. The analysis showed that there were significant differences on improvement science literacy, mathematics technology-engineering between experiment class and control class with effect size more than 0.8 (large effect). The difference of improvement of STEM literacy between experiment class and control class is caused by the existence of design engineering activity which required students to apply the knowledge from every field of STEM. The challenge that was faced in STEM learning through design engineering activity was how to give the students practice to integrate STEM field in solving the problems. In additional, most of the students gave positive response toward implementation of STEM learning through design boat model project.

  7. SELENIUM TREATMENT/REMOVAL ALTERNATIVES DEMONSTRATION PROJECT - MINE WASTE TECHNOLOGY PROGRAM ACTIVITY III, PROJECT 20

    Science.gov (United States)

    This document is the final report for EPA's Mine WAste Technology Program (MWTP) Activity III, Project 20--Selenium Treatment/Removal Alternatives Demonstration project. Selenium contamination originates from many sources including mining operations, mineral processing, abandoned...

  8. Modeling technological learning and its application for clean coal technologies in Japan

    International Nuclear Information System (INIS)

    Nakata, Toshihiko; Sato, Takemi; Wang, Hao; Kusunoki, Tomoya; Furubayashi, Takaaki

    2011-01-01

    Estimating technological progress of emerging technologies such as renewables and clean coal technologies becomes important for designing low carbon energy systems in future and drawing effective energy policies. Learning curve is an analytical approach for describing the decline rate of cost and production caused by technological progress as well as learning. In the study, a bottom-up energy-economic model including an endogenous technological learning function has been designed. The model deals with technological learning in energy conversion technologies and its spillover effect. It is applied as a feasibility study of clean coal technologies such as IGCC (Integrated Coal Gasification Combined Cycle) and IGFC (Integrated Coal Gasification Fuel Cell System) in Japan. As the results of analysis, it is found that technological progress by learning has a positive impact on the penetration of clean coal technologies in the electricity market, and the learning model has a potential for assessing upcoming technologies in future.

  9. Research Project Evaluation—Learnings from the PATHWAYS Project Experience

    Directory of Open Access Journals (Sweden)

    Aleksander Galas

    2018-05-01

    Full Text Available Background: Every research project faces challenges regarding how to achieve its goals in a timely and effective manner. The purpose of this paper is to present a project evaluation methodology gathered during the implementation of the Participation to Healthy Workplaces and Inclusive Strategies in the Work Sector (the EU PATHWAYS Project. The PATHWAYS project involved multiple countries and multi-cultural aspects of re/integrating chronically ill patients into labor markets in different countries. This paper describes key project’s evaluation issues including: (1 purposes, (2 advisability, (3 tools, (4 implementation, and (5 possible benefits and presents the advantages of a continuous monitoring. Methods: Project evaluation tool to assess structure and resources, process, management and communication, achievements, and outcomes. The project used a mixed evaluation approach and included Strengths (S, Weaknesses (W, Opportunities (O, and Threats (SWOT analysis. Results: A methodology for longitudinal EU projects’ evaluation is described. The evaluation process allowed to highlight strengths and weaknesses and highlighted good coordination and communication between project partners as well as some key issues such as: the need for a shared glossary covering areas investigated by the project, problematic issues related to the involvement of stakeholders from outside the project, and issues with timing. Numerical SWOT analysis showed improvement in project performance over time. The proportion of participating project partners in the evaluation varied from 100% to 83.3%. Conclusions: There is a need for the implementation of a structured evaluation process in multidisciplinary projects involving different stakeholders in diverse socio-environmental and political conditions. Based on the PATHWAYS experience, a clear monitoring methodology is suggested as essential in every multidisciplinary research projects.

  10. Improving Information Technology Curriculum Learning Outcomes

    Directory of Open Access Journals (Sweden)

    Derrick L Anderson

    2017-06-01

    The case study research methodology has been selected to conduct the inquiry into this phenomenon. This empirical inquiry facilitates exploration of a contemporary phenomenon in depth within its real-life context using a variety of data sources. The subject of analysis will be two Information Technology classes composed of a combination of second year and third year students; both classes have six students, the same six students. Contribution It is the purpose of this research to show that the use of improved approaches to learning will produce more desirable learning outcomes. Findings The results of this inquiry clearly show that the use of the traditional behaviorist based pedagogic model to achieve college and university IT program learning outcomes is not as effective as a more constructivist based andragogic model. Recommendations Instruction based purely on either of these does a disservice to the typical college and university level learner. The correct approach lies somewhere in between them; the most successful outcome attainment would be the product of incorporating the best of both. Impact on Society Instructional strategies produce learning outcomes; learning outcomes demonstrate what knowledge has been acquired. Acquired knowledge is used by students as they pursue professional careers and other ventures in life. Future Research Learning and teaching approaches are not “one-size-fits-all” propositions; different strategies are appropriate for different circumstances and situations. Additional research should seek to introduce vehicles that will move learners away from one the traditional methodology that has been used throughout much of their educational careers to an approach that is better suited to equip them with the skills necessary to meet the challenges awaiting them in the professional world.

  11. Projecting technology change to improve space technology planning and systems management

    Science.gov (United States)

    Walk, Steven Robert

    2011-04-01

    Projecting technology performance evolution has been improving over the years. Reliable quantitative forecasting methods have been developed that project the growth, diffusion, and performance of technology in time, including projecting technology substitutions, saturation levels, and performance improvements. These forecasts can be applied at the early stages of space technology planning to better predict available future technology performance, assure the successful selection of technology, and improve technology systems management strategy. Often what is published as a technology forecast is simply scenario planning, usually made by extrapolating current trends into the future, with perhaps some subjective insight added. Typically, the accuracy of such predictions falls rapidly with distance in time. Quantitative technology forecasting (QTF), on the other hand, includes the study of historic data to identify one of or a combination of several recognized universal technology diffusion or substitution patterns. In the same manner that quantitative models of physical phenomena provide excellent predictions of system behavior, so do QTF models provide reliable technological performance trajectories. In practice, a quantitative technology forecast is completed to ascertain with confidence when the projected performance of a technology or system of technologies will occur. Such projections provide reliable time-referenced information when considering cost and performance trade-offs in maintaining, replacing, or migrating a technology, component, or system. This paper introduces various quantitative technology forecasting techniques and illustrates their practical application in space technology and technology systems management.

  12. The effect of technology-enabled active learning on undergraduate students understanding of electromagnetism

    International Nuclear Information System (INIS)

    Dori, Y.J.

    2005-01-01

    Full Text:The Technology-Enabled Active Learning Project at the Massachusetts Institute of Technology (MIT) involves media-rich software for simulation and visualization in freshman physics carried out in a specially redesigned classroom to facilitate group interaction. These technology-based learning materials are especially useful in electromagnetism to help students conceptualize phenomena and processes. This study analyzes the effects of the unique learning environment of the Technology-Enabled Active Learning Project project on students cognitive and affective outcomes. The assessment of the project included examining students conceptual understanding before and after studying electromagnetism in a media-rich environment. We also investigated the effect of this environment on students preferences regarding the various teaching methods. As part of the project, we developed pre- and post-tests consisting of conceptual questions from standardized tests, as well as questions designed to assess the effect of visualizations and experiments. The research population consisted of 811 undergraduate students. It consisted of a small- and a large-scale experimental groups and a control group. Technology-Enabled Active Learning Project students improved their conceptual understanding concepts of the subject matter to a significantly higher extent than their control group peers. A majority of the students in the small-scale experiment noted that they would recommend the Technology-Enabled Active Learning Project course to fellow students, indicating the benefits of inter activity, visualization, and hands-on experiments, which the technology helped enable. In the large-scale implementation students expressed both positive and negative attitudes in the course survey

  13. Science Teaching Orientations and Technology-Enhanced Tools for Student Learning

    Science.gov (United States)

    Campbell, Todd; Longhurst, Max; Duffy, Aaron M.; Wolf, Paul G.; Shelton, Brett E.

    2013-01-01

    This qualitative study examines teacher orientations and technology-enhanced tools for student learning within a science literacy framework. Data for this study came from a group of 10 eighth grade science teachers. Each of these teachers was a participant in a professional development (PD) project focused on reformed and technology-enhanced…

  14. VATE: VAlidation of high TEchnology based on large database analysis by learning machine

    NARCIS (Netherlands)

    Meldolesi, E; Van Soest, J; Alitto, A R; Autorino, R; Dinapoli, N; Dekker, A; Gambacorta, M A; Gatta, R; Tagliaferri, L; Damiani, A; Valentini, V

    2014-01-01

    The interaction between implementation of new technologies and different outcomes can allow a broad range of researches to be expanded. The purpose of this paper is to introduce the VAlidation of high TEchnology based on large database analysis by learning machine (VATE) project that aims to combine

  15. Technology Enhanced Learning in Science: Interactions, Affordances and Design Based Research

    Science.gov (United States)

    Scanlon, Eileen

    2010-01-01

    The role of an educational technologist is difficult to define. This paper reflects on the experience of working on a range of technology enhanced learning in science projects to review a number of working principles which have proved effective in the practice of educational technology. It discusses how these principles relate to the theories in…

  16. A Mentoring Model for Interactive Online Learning in Support of a Technology Innovation Challenge Grant

    Science.gov (United States)

    Graves, Scott M.; Abbitt, Jason; Klett, Mitchell D.; Wang, Changhua

    2009-01-01

    The Lewis & Clark Rediscovery Project is a technology professional development program designed to help teachers restructure teaching and learning practices in the classroom, and to foster technology use in the schools. The 5-year program (extended into a 6th) was funded in 1999 with a grant from the U.S. Department of Education: Technology…

  17. Promoting Active Learning in Technology-Infused TILE Classrooms at the University of Iowa

    Directory of Open Access Journals (Sweden)

    Sam Van Horne

    2012-06-01

    Full Text Available In this case study, the authors describe the successful implementation of technology-infused TILE classrooms at the University of Iowa. A successful collaboration among campus units devoted to instructional technologies and teacher development, the TILE Initiative has provided instructors with a new set of tools to support active learning. The authors detail the implementation of the TILE classrooms, the process of training instructors to design effective instruction for these classrooms, and an assessment project that helps improve the process of ensuring faculty can successfully facilitate learning activities in a technology-infused learning environment.

  18. Technological Learning in Energy Models: Experience and Scenario Analysis with MARKAL and the ERIS Model Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, L.; Kypreos, S.

    1999-09-01

    Understanding technology dynamics, a fundamental driving factor of the evolution of energy systems, is essential for sound policy formulation and decision making. Technological change is not an autonomous process, but evolves from a number of endogenous interactions within the social system. Technologies evolve and improve only if experience with them is possible. Efforts must be devoted to improve our analytical tools concerning the treatment given to the technological variable, recognising the cumulative and gradual nature of technological change and the important role played by learning processes. This report presents a collection of works developed by the authors concerning the endogenisation of technological change in energy optimisation models, as a contribution to the Energy Technology Dynamics andAdvanced Energy System Modelling Project (TEEM), developed in the framework of the Non Nuclear Energy Programme JOULE III of the European Union (DGXII). Here, learning curves, an empirically observed manifestation of the cumulative technological learning processes, are endogenised in two energy optimisation models. MARKAL, a widely used bottom-up model developed by the ETSAP programme of the IEA and ERIS, a model prototype, developed within the TEEM project for assessing different concepts and approaches. The methodological approach is described and some results and insights derived from the model analyses are presented. The incorporation of learning curves results in significantly different model outcomes than those obtained with traditional approaches. New, innovative technologies, hardly considered by the standard models, are introduced to the solution when endogenous learning is present. Up-front investments in initially expensive, but promising, technologies allow the necessary accumulation of experience to render them cost-effective. When uncertainty in emission reduction commitments is considered, the results point also in the direction of undertaking early

  19. Technological Learning in Energy Models: Experience and Scenario Analysis with MARKAL and the ERIS Model Prototype

    International Nuclear Information System (INIS)

    Barreto, L.; Kypreos, S.

    1999-09-01

    Understanding technology dynamics, a fundamental driving factor of the evolution of energy systems, is essential for sound policy formulation and decision making. Technological change is not an autonomous process, but evolves from a number of endogenous interactions within the social system. Technologies evolve and improve only if experience with them is possible. Efforts must be devoted to improve our analytical tools concerning the treatment given to the technological variable, recognising the cumulative and gradual nature of technological change and the important role played by learning processes. This report presents a collection of works developed by the authors concerning the endogenisation of technological change in energy optimisation models, as a contribution to the Energy Technology Dynamics and Advanced Energy System Modelling Project (TEEM), developed in the framework of the Non Nuclear Energy Programme JOULE III of the European Union (DGXII). Here, learning curves, an empirically observed manifestation of the cumulative technological learning processes, are endogenised in two energy optimisation models. MARKAL, a widely used bottom-up model developed by the ETSAP programme of the IEA and ERIS, a model prototype, developed within the TEEM project for assessing different concepts and approaches. The methodological approach is described and some results and insights derived from the model analyses are presented. The incorporation of learning curves results in significantly different model outcomes than those obtained with traditional approaches. New, innovative technologies, hardly considered by the standard models, are introduced to the solution when endogenous learning is present. Up-front investments in initially expensive, but promising, technologies allow the necessary accumulation of experience to render them cost-effective. When uncertainty in emission reduction commitments is considered, the results point also in the direction of undertaking early

  20. In-Space Propulsion (346620) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Technologies include, but are not limited to, electric and advanced chemical propulsion, propellantless propulsion such as aerocapture and solar sails, sample return...

  1. Current Renewable Energy Technologies and Future Projections

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Stephen W [ORNL; Lapsa, Melissa Voss [ORNL; Ward, Christina D [ORNL; Smith, Barton [ORNL; Grubb, Kimberly R [ORNL; Lee, Russell [ORNL

    2007-05-01

    The generally acknowledged sources of renewable energy are wind, geothermal, biomass, solar, hydropower, and hydrogen. Renewable energy technologies are crucial to the production and utilization of energy from these regenerative and virtually inexhaustible sources. Furthermore, renewable energy technologies provide benefits beyond the establishment of sustainable energy resources. For example, these technologies produce negligible amounts of greenhouse gases and other pollutants in providing energy, and they exploit domestically available energy sources, thereby reducing our dependence on both the importation of fossil fuels and the use of nuclear fuels. The market price of renewable energy technologies does not reflect the economic value of these added benefits.

  2. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    International Nuclear Information System (INIS)

    Fix, Anne

    2007-01-01

    The U.S. Department of Energy (DOE) has conducted interim groundwater remedial activities on the Hanford Site since the mid-1990s for several groundwater contamination plumes. DOE established the Columbia River Protection Supplemental Technologies Project (Technologies Project) in 2006 to evaluate alternative treatment technologies. The objectives for the technology project are as follows: develop a 300 Area polyphosphate treatability test to immobilize uranium, design and test infiltration of a phosphate/apatite technology for Sr-90 at 100-N, perform carbon tetrachloride and chloroform attenuation parameter studies, perform vadose zone chromium characterization and geochemistry studies, perform in situ biostimulation of chromium studies for a reducing barrier at 100-D, and perform a treatability test for phytoremediation for Sr-90 at 100-N. This document provides the quality assurance guidelines that will be followed by the Technologies Project. This Quality Assurance Project Plan is based on the quality assurance requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory?s Standards-Based Management System. In addition, the technology project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.

  3. Using Technology-Nested Instructional Strategies to Enhance Student Learning

    OpenAIRE

    Angela Lumpkin, PhD; Rebecca M. Achen, PhD; Regan K. Dodd, PhD

    2015-01-01

    Students today expect the use of technology in their classes, rather than have to listen to less-than-engaging lectures. College students are connected electronically and incessant technology consumers. As a result, they may prefer the infusion of technologies to help them learn and enjoy the process of learning, rather than having to listen exclusively to lectures. To investigate this, the authors solicited student perceptions to assess the importance of learning through technology-nested...

  4. University technology platform of anticipatory learning

    Directory of Open Access Journals (Sweden)

    Leonid Davidovich Gitelman

    2016-03-01

    Full Text Available The innovative development sets large-scale and challenging tasks, which need to be addressed in the lack-of-knowledge conditions and require the coordination and integration of numerous expert structures, which are scattered around the world and have different status and competencies. One of the mechanisms of integrating the partners’ intellectual and financial resources is provided by the technology platforms. The article discusses the nature and functions of technology platforms and analyzes the experience of their application in different countries with a special emphasis on universities. The article gives an overview of the various interpretations of technology platform concepts. It also describes the development and implementation of the technological platform at the Ural Federal University (research and education centre ‘ENGEC’, which was targeted at organizing anticipatory learning in the sphere of energy engineering and high-tech industries; its mechanism and role in improving different university activities and processes are shown. This platform is based on the original methodology ‘Integrated System of Consulting, Training, and Transformation’ (ISCT, which includes authentic methods and technologies, which are used in the educational process. A significant advantage of this methodology is that it can be applied in university education as well as in corporate training integrated with innovative activities.

  5. Project- Based Learning and Problem-Based Learning: Are They Effective to Improve Student's Thinking Skills?

    OpenAIRE

    Anazifa, R. D; Djukri, D

    2017-01-01

    The study aims at finding (1) the effect of project-based learning and problem-based learning on student's creativity and critical thinking and (2) the difference effect of project-based learning and problem-based learning on student's creativity and critical thinking. This study is quasi experiment using non-equivalent control-group design. Research population of this study was all classes in eleventh grade of mathematics and natural science program of SMA N 1 Temanggung. The participants we...

  6. An Analysis of Learning Activities in a Technology Education Textbook for Teachers : Learning Process Based on Contents Framework and Learning Scene to Develop Technological Literacy

    OpenAIRE

    Yata, Chikahiko; Hamamoto, Kengo; Oguri, Takenori

    2014-01-01

    This study analyzed the learning activities in a textbook on technology education for teachers, in order to examine the learning processes and learning scenes detailed therein. Results of analyzing learning process, primary learning activity found each contents framework. Other learning activities designated to be related to complementary in learning process. Results of analyzing learning scene, 14 learning scenes, among them "Scene to recognize the impact on social life and progress of techn...

  7. Integration of learning technologies into teaching within Fijian Polytechnic Institutions

    Directory of Open Access Journals (Sweden)

    Shalendra Kumar

    2016-11-01

    Full Text Available Abstract In the 21st century, learning technologies have increasingly become pervasive within various forms of learning environments. Institutions of higher education are increasingly turning to these technologies to resource and support their teaching and learning environments under distributed circumstances, face-to-face or blended. Recently, the Fijian Ministry of Education systematically introduced learning technologies into Fiji’s technical colleges to support teaching and learning. However, prior to the widespread deployment of these technologies, little information was available on educators’ perception of the value of these technologies, and the extent to which this could influence adoption. The purpose of this study was to gain a better understanding of lecturers’ perceptions of the value of learning technologies and factors likely to influence their decisions to adopt and integrate these technologies into teaching as well as challenges they are likely to face. A survey was administered to fifty five self-selected lecturers involved in teaching within three Polytechnics in Fiji. Although overall findings suggested that lecturers strongly valued the contribution of learning technologies in enhancing student learning, a number of factors likely to influence the rapid adoption of these technologies were identified. These included attitude towards technology and perceived usefulness of technology in teaching, the institutional cultural environment, as well as resources available to support uptake. This research contributes to the growing significance of individual, contextual and cultural influences in the adoption of learning technologies into teaching.

  8. Learning based in projects to promote interdisciplinarity in Secondary School

    Directory of Open Access Journals (Sweden)

    Daniela Boff

    2016-02-01

    Full Text Available The project-based learning is an active learning strategy that helps break the paradigm of traditional teaching methods. The student is involved in the learning proposal that includes the PiBL, on which one is not passive and becomes the main actor in one's own teaching learning process. Within this learning strategy, the teacher becomes a mediator between theory and practice thus each different subject interact with one another in order to develop a topic that is mutual to all areas because the learning environment is naturally interdisciplinary. The idea of this kind of learning strategy was applied during a workshop that took place with primary and secondary schoolteachers in order to help them approach the strategy in the classroom, contributing with experiences and ideas towards the interdisciplinary based project.

  9. Implementing CDIO project-based learning in training of Heat and Power engineers

    Science.gov (United States)

    Boiko, E. A.; Shishmarev, P. V.; Karabarin, D. I.; Yanov, S. R.; Pikalova, A. A.

    2017-11-01

    This paper presents the experience and current results of CDIO standards implementation in training of bachelors in Heat and Power Engineering at Thermal Power Stations academic department in Siberian Federal University. It provides information on methodology of modernization of educational programs, curricula and programs of disciplines in transition to CDIO project-based learning technology. Preliminary assessment and analysis of lessons learned and scaling perspectives are given.

  10. Seamless learning: Technology-enhanced learning from practical experiences across contexts

    NARCIS (Netherlands)

    Rusman, Ellen

    2018-01-01

    Rusman, E. (2018, 8th of June). Seamless learning: Technology-enhanced learning from practical experiences across contexts. Keynote presentation at the Seamless learning conference, Maastricht, The Netherlands. http://www.ou.nl/slc

  11. Technology Base Research Project for electrochemical energy storage

    Science.gov (United States)

    Kinoshita, K.

    1985-06-01

    The DOE Electrochemical Energy Storage Program is divided into two projects: (1) the exploratory technology development and testing (ETD) project and (2) the technology base research (TBR) project. The role of the TBR Project is to perform supporting research for the advanced battery systems under development by the ETD Project, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the TBR Project is to identify the most promising electrochemical technologies and transfer them to industry and/or the ETD Project for further development and scale-up. This report summarizes the research, financial, and management activities relevant to the TBR Project in CY 1984. General problem areas addressed by the project include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the assessment of fuel-cell technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The TBR Project is divided into three major project elements: exploratory research, applied science research, and air systems research.

  12. Validating a Technology Enhanced Student-Centered Learning Model

    Science.gov (United States)

    Kang, Myunghee; Hahn, Jungsun; Chung, Warren

    2015-01-01

    The Technology Enhanced Student Centered Learning (TESCL) Model in this study presents the core factors that ensure the quality of learning in a technology-supported environment. Although the model was conceptually constructed using a student-centered learning framework and drawing upon previous studies, it should be validated through real-world…

  13. Mapping Students Use of Technologies in Problem Based Learning Environments

    DEFF Research Database (Denmark)

    Rongbutsri, Nikorn; Khalid, Md. Saifuddin; Ryberg, Thomas

    2011-01-01

    This paper aims to understand how students use technology to enhance their learning in problem-based learning environments. The research methodology is based on both qualitative and quantitative studies. The results are based on students’ interviews, a survey and students’ reflections in course......-related blog posts; they show that students have positive perceptions toward using technologies in problem-based learning environments....

  14. Facilitating Adoption of Web Tools for Problem and Project Based Learning Activities

    DEFF Research Database (Denmark)

    Khalid, Md. Saifuddin; Rongbutsri, Nikorn; Buus, Lillian

    2012-01-01

    and project based learning. In the area of problem and project based learning, facilitation is the core term and the teacher often has the role as facilitator or moderator instead of a teacher teaching. Technology adoption for learning activities needs facilitation, which is mostly absent. Sustainable......This paper builds on research directions from ‘activity theory’ and ‘learning design’ to provide ‘facilitation’ for students standing within decision making related to selection of web 2.0 tools and university provided web-based applications for supporting students activities within problem...... adoption might be facilitated based on tool appropriation with activities associated with courses and projects. Our mapping of different tools in a framework is reported based on interviews, observations, narratives and survey. A direction towards facilitation process for adoption is discussed as part...

  15. Manufacturing Methods and Technology Project Summary Reports

    Science.gov (United States)

    1984-12-01

    Powder ME-16 Type Recoil Mechanism Testing Machine (Powder Gymnasticator ) Projects 677, 78 7814 - Synthetic Quenchants for ME-18 Heat Treating Weapon...were deemed most urgent. These two were the prime candidates for the GEPTTA. Figure I is an artist depiction of the General Purpose Transportability...REPORT (RCS DRCMT-302) MMT Project 677 7753 titled "Noise Suppressor for Powder Type Recoil Mecha- nism Testing Machine (Powder Gymnasticator )" was

  16. Contexts of Learning: The PATOIS project and Internet-based teaching and learning in Higher Education

    Directory of Open Access Journals (Sweden)

    William Kilbride

    2002-10-01

    Full Text Available This article is a reflection on the problems, challenges and strengths of network-based distance learning in archaeology. Based on the experience of one project - the PATOIS (Publications and Archives Teaching with Online Information Systems Project - it looks at how archaeologists might best respond (and by implication how they ought not to respond to the use of information technology in teaching. The PATOIS project is an attempt on behalf of a consortium of UK higher education institutions and allied research bodies to tell students about the information tools that are emerging in archaeology, and which are changing the culture of scholarship. Funded by the Joint Information Systems Committee (JISC and led by the Archaeology Data Service (ADS, PATOIS presents students with these new research tools and novel forms of academic literacy by direct exposure to 'primary' datasets. The PATOIS project is producing a set of Internet-based tutorials that lead students through different datasets and show how they may be deployed in research. This article describes the institutional and intellectual background to the project, and reports on the content of the tutorials themselves. Perhaps more importantly, it looks at the process through which PATOIS was developed, reviewing the challenges and constraints that the development team faced. Thereafter, we turn to the implementation of PATOIS in real teaching scenarios and look at how and when these have been successful as well as the challenges that remain unanswered. The project is not yet complete, so at this stage we can come to no firm conclusions about the long-term impact of PATOIS in facilitating change in undergraduate research training. Nonetheless, from the perspective of development work, the project has largely been completed, so those conclusions that may be drawn are most appropriately addressed to developers hoping or planning to undertake similar work in the future, or academics looking to

  17. [Implementation of the eLearning project NESTOR. A network for students in traumatology and orthopedics].

    Science.gov (United States)

    Back, D A; Haberstroh, N; Hoff, E; Plener, J; Haas, N P; Perka, C; Schmidmaier, G

    2012-01-01

    Modern internet-based information technologies offer great possibilities to create and improve teaching methods for students. The eLearning tool NESTOR (Network for Students in Traumatology and Orthopedics) presented here was designed to complement the existing clinical teaching in orthopedics and traumatology at the Charité, University Medicine Berlin. Using a learning management system, videos, podcasts, X-ray diagnosis, virtual patients, tests and further tools for learning and study information were combined. After implementation the eLearning project was evaluated by students. The NESTOR project offers various possibilities for knowledge acquisition. Students using the program voluntarily showed a high acceptance whereby 82.4% were very satisfied with the contents offered and 95.3% supported the idea of a future use of NESTOR in teaching. The blended learning approach was positively evaluated by 93.5% of the students. The project received the eLearning seal of quality of the Charité University Medicine Berlin. Using complex eLearning tools, such as the NESTOR project represents a contemporary teaching approach in the teaching of traumatology and orthopedics and should be offered in a blended learning context as they are well accepted by students.

  18. City of Austin: Green habitat learning project. A green builder model home project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The purpose of the Year 14 UCETF project was to design and construct a residential structure that could serve as a demonstration facility, training site, and testing and monitoring laboratory for issues related to the implementation of sustainable building practices and materials. The Model Home Project builds on the previous and existing efforts, partially funded by the UCETF, of the City of Austin Green Builder Program to incorporate sustainable building practices into mainstream building activities. The Green Builder Program uses the term {open_quotes}green{close_quotes} as a synonym for sustainability. In the research and analysis that was completed for our earlier reports in Years 12 and 13, we characterized specific elements that we associate with sustainability and, thus, green building. In general, we refer to a modified life cycle assessment to ascertain if {open_quotes}green{close_quotes} building options reflect similar positive cyclical patterns found in nature (i.e. recyclability, recycled content, renewable resources, etc.). We additionally consider economic, human health and synergistic ecological impacts associated with our building choices and characterize the best choices as {open_quotes}green.{close_quotes} Our ultimate goal is to identify and use those {open_quotes}green{close_quotes} materials and processes that provide well for us now and do not compromise similar benefits for future generations. The original partnership developed for this project shifted during the year from a project stressing advanced (many prototypical) {open_quotes}green{close_quotes} building materials and techniques in a research and demonstration context, to off-the-shelf but underutilized {open_quotes}green{close_quotes} materials in the practical social context of using {open_quotes}green{close_quotes} technologies for low income housing. That project, discussed in this report, is called the Green Habitat Learning Project.

  19. Overcoming Learning Time And Space Constraints Through Technological Tool

    Directory of Open Access Journals (Sweden)

    Nafiseh Zarei

    2015-08-01

    Full Text Available Today the use of technological tools has become an evolution in language learning and language acquisition. Many instructors and lecturers believe that integrating Web-based learning tools into language courses allows pupils to become active learners during learning process. This study investigate how the Learning Management Blog (LMB overcomes the learning time and space constraints that contribute to students’ language learning and language acquisition processes. The participants were 30 ESL students at National University of Malaysia. A qualitative approach comprising an open-ended questionnaire and a semi-structured interview was used to collect data. The results of the study revealed that the students’ language learning and acquisition processes were enhanced. The students did not face any learning time and space limitations while being engaged in the learning process via the LMB. They learned and acquired knowledge using the language learning materials and forum at anytime and anywhere. Keywords: learning time, learning space, learning management blog

  20. Project Management Plan for the INEL technology logic diagrams

    International Nuclear Information System (INIS)

    Rudin, M.J.

    1992-10-01

    This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, ''Technology Logic Diagrams For The INEL.'' The work on this project will be conducted by personnel in EG ampersand G Idaho, Inc.'s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project

  1. MNOS BORAM Manufacturing Methods and Technology Project.

    Science.gov (United States)

    1981-08-01

    served primarily as a learning vehicle to allow formulation of more complete investigations. 1-12 Table 1-1. Repeatability Data for RP Test BORAM 6008 Chip...and Electronic SYSleMS Center * Baltimore. Maryland June 1981 pageI of I0 5.7 Event Sequence it) Store [)a(& in All Cells of a Hibrid Circuit I sing

  2. The Benefits of the E-Learning Agricultural Project Kissankerala to Digital Immigrants and Digital Natives

    Science.gov (United States)

    Roy V., Manoj; Ghosh, Chimoy Kumar

    2013-01-01

    In recent times Information and Communication Technology (ICT) has been able to make inroads into the ways information is disseminated among those involved in direct farming and farming related enterprises. This paper arose from a two-year study of the KissanKerala, the e-learning project underway in Kerala, a small state in India. It is more…

  3. Rapid E-learning Development Strategies and a Multimedia Project Design Model

    Science.gov (United States)

    Sözcü, Ömer Faruk; Ipek, Ismail

    2014-01-01

    The purpose of the study is to discuss e-learning design strategies which can be used for multimedia projects as a design model. Recent advances in instructional technologies have been found to be very important in the design of training courses by using rapid instructional design (ID) approaches. The approaches were developed to use in training…

  4. Math Path: Encouraging Female Students in Mathematics through Project-Based Learning

    Science.gov (United States)

    Evans, Riley; Friedman, Jane; McGrath, Lynn; Myers, Perla; Ruiz, Amanda

    2018-01-01

    Although the number of bachelor's degrees in the U.S. awarded to women has gone up, engagement of women in science, technology, engineering, and mathematics (STEM) continues to be low. This paper presents a project-based learning program, informed by education research best practices, designed to provide research experiences to female students…

  5. The Adoption of Mobile Learning in a Traditional Training Environment: The C95-Challenge Project Experience

    Science.gov (United States)

    Catenazzi, Nadia; Sommaruga, Lorenzo; De Angelis, Kylene; Gabbianelli, Giulio

    2016-01-01

    Within the C95-Challenge Erasmus+ project, mobile learning technologies are adopted and tested for bus and truck drivers training according to the EU 2003/59/EC Directive. Different kinds of training contents are developed in the form of interactive slides, hyper-videos, interactive quizzes and delivered on mobile devices. Existing apps and games…

  6. Teachers as Learning Designers: What Technology Has to Do with Learning. A View from Singapore

    Science.gov (United States)

    Fei, Victor Lim; Hung, David

    2016-01-01

    This article discusses the controversies and value in the use of technology for learning. It proposes that as a teaching tool, technology also opens up new possibilities for teachers to design meaningful learning experiences for their students. The appropriate use of technology promises to deepen the learning of traditional literacy, numeracy, and…

  7. Lessons learned applying CASE methods/tools to Ada software development projects

    Science.gov (United States)

    Blumberg, Maurice H.; Randall, Richard L.

    1993-01-01

    This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

  8. Mobile Technologies Enhance the E-Learning Opportunity

    Science.gov (United States)

    Chuang, Keh-Wen

    2009-01-01

    The objective of this paper is to identify the mobile technologies that enhance the E-Learning opportunity, examine the educational benefits and implementation issues in mobile learning, discuss the guidelines for implementing effective mobile learning, identify the current application and operation of mobile learning, and discuss the future of…

  9. Learning network theory : its contribution to our understanding of work-based learning projects and learning climate

    NARCIS (Netherlands)

    Poell, R.F.; Moorsel, M.A.A.H. van

    1996-01-01

    This paper discusses the relevance of Van der Krogt's learning network theory (1995) for our understanding of the concepts of work-related learning projects and learning climate in organisations. The main assumptions of the learning network theory are presented and transferred to the level of

  10. Service Learning: An Auditing Project Study

    Science.gov (United States)

    Laing, Gregory Kenneth

    2013-01-01

    There is a growing demand in higher education for universities to introduce teaching methods that achieve the learning outcomes of vocational education. The need for vocational educational outcomes was met in this study involving a service learning activity designed to provide basic professional auditing competencies. The details of the design and…

  11. Emerging Technologies as Cognitive Tools for Authentic Learning

    Science.gov (United States)

    Herrington, Jan; Parker, Jenni

    2013-01-01

    Employing emerging technologies in learning is becoming increasingly important as a means to support the development of digital media literacy. Using a theoretical framework of authentic learning and technology as cognitive tools, this paper examined student responses to the infusion of emerging technologies in a large first year teacher education…

  12. Learning and Technology in Alberta (1975 to 2009)

    Science.gov (United States)

    Alberta Education, 2009

    2009-01-01

    Alberta's education system is a leader in the use of technology in teaching and learning. New information technologies create options for how teachers teach, how students learn, and how classrooms look and operate. This document chronicles the history of computer technology in Alberta from 1975-2009. The information is arranged in a tabulated…

  13. Using Technology-Nested Instructional Strategies to Enhance Student Learning

    Science.gov (United States)

    Lumpkin, Angela; Achen, Rebecca M.; Dodd, Regan K.

    2015-01-01

    Students today expect the use of technology in their classes, rather than have to listen to less-than-engaging lectures. College students are connected electronically and incessant technology consumers. As a result, they may prefer the infusion of technologies to help them learn and enjoy the process of learning, rather than having to listen…

  14. Utilization of Information and Communication Technologies in Mathematics Learning

    Science.gov (United States)

    Saadati, Farzaneh; Tarmizi, Rohani Ahmad; Ayub, Ahmad Fauzi Mohd

    2014-01-01

    Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students' perception regarding the use of Information and Communication Technologies (ICT)…

  15. The Effectiveness of Project Based Learning in Trigonometry

    Science.gov (United States)

    Gerhana, M. T. C.; Mardiyana, M.; Pramudya, I.

    2017-09-01

    This research aimed to explore the effectiveness of Project-Based Learning (PjBL) with scientific approach viewed from interpersonal intelligence toward students’ achievement learning in mathematics. This research employed quasi experimental research. The subjects of this research were grade X MIPA students in Sleman Yogyakarta. The result of the research showed that project-based learning model is more effective to generate students’ mathematics learning achievement that classical model with scientific approach. This is because in PjBL model students are more able to think actively and creatively. Students are faced with a pleasant atmosphere to solve a problem in everyday life. The use of project-based learning model is expected to be the choice of teachers to improve mathematics education.

  16. Cascade Error Projection: An Efficient Hardware Learning Algorithm

    Science.gov (United States)

    Duong, T. A.

    1995-01-01

    A new learning algorithm termed cascade error projection (CEP) is presented. CEP is an adaption of a constructive architecture from cascade correlation and the dynamical stepsize of A/D conversion from the cascade back propagation algorithm.

  17. Adaptive and perceptual learning technologies in medical education and training.

    Science.gov (United States)

    Kellman, Philip J

    2013-10-01

    Recent advances in the learning sciences offer remarkable potential to improve medical education and maximize the benefits of emerging medical technologies. This article describes 2 major innovation areas in the learning sciences that apply to simulation and other aspects of medical learning: Perceptual learning (PL) and adaptive learning technologies. PL technology offers, for the first time, systematic, computer-based methods for teaching pattern recognition, structural intuition, transfer, and fluency. Synergistic with PL are new adaptive learning technologies that optimize learning for each individual, embed objective assessment, and implement mastery criteria. The author describes the Adaptive Response-Time-based Sequencing (ARTS) system, which uses each learner's accuracy and speed in interactive learning to guide spacing, sequencing, and mastery. In recent efforts, these new technologies have been applied in medical learning contexts, including adaptive learning modules for initial medical diagnosis and perceptual/adaptive learning modules (PALMs) in dermatology, histology, and radiology. Results of all these efforts indicate the remarkable potential of perceptual and adaptive learning technologies, individually and in combination, to improve learning in a variety of medical domains. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

  18. The Development of an Instrument to Measure the Project Competences of College Students in Online Project-Based Learning

    Science.gov (United States)

    Lin, Chien-Liang

    2018-02-01

    This study sought to develop a self-report instrument to be used in the assessment of the project competences of college students engaged in online project-based learning. Three scales of the KIPSSE instrument developed for this study, namely, the knowledge integration, project skills, and self-efficacy scales, were based on related theories and the analysis results of three project advisor interviews. Those items of knowledge integration and project skill scales focused on the integration of different disciplines and technological skills separately. Two samples of data were collected from information technology-related courses taught with an online project-based learning strategy over different semesters at a college in southern Taiwan. The validity and reliability of the KIPSSE instrument were confirmed through item analysis and confirmatory factor analysis using structural equation modeling of two samples of students' online response sets separately. The Cronbach's alpha reliability coefficient for the entire instrument was 0.931; for each scale, the alpha ranged from 0.832 to 0.907. There was also a significant correlation ( r = 0.55, p < 0.01) between the KIPSSE instrument results and the students' product evaluation scores. The findings of this study confirmed the validity and reliability of the KIPSSE instrument. The confirmation process and related implications are also discussed.

  19. EUROPEAN PROJECTS AS A TOOL FOR IMPROVING FARMERS SKILLS VIA MODERN INFORMATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Zuzana PALKOVA

    2013-01-01

    Full Text Available This article presents European projects with the main focus on the improving the skills and competitiveness of farmers by modern information and communication technologies and e-learning methods. Two projects – AVARES - Enhance attractiveness of renewable energy training by virtual reality and NewCAP - New European Standards in the Context of Reformed EU Common Agricultural Policy are projects under the Leonardo da Vinci Transfer ofInnovation grant scheme. They try to present new way of vocational education and training in the agrosector. The main aim of the AVARES project is to develop the multimedia learning materials for vocational education and training in the field of agricultural and rural development and application of modern information and communication technologies into vocational education and training. The emphasis is put on the application of modern ICT equipment and technologies, with the main focus on the Virtual reality, 3D visual display and e - learning 2.0 methods. New programming period 2014 – 2020 will bring significant changes within the Common Agricultural Policy (CAP which will have a serious impact on economy especially of larger beneficiaries. The „NewCAP“ project aiming at preparation of actors in rural areas to take the proposed changes in the policy through interactive educational programme.

  20. Project-based faculty development for e-learning.

    Science.gov (United States)

    Vyas, Rashmi; Faith, Minnie; Selvakumar, Dhayakani; Pulimood, Anna; Lee, Mary

    2016-12-01

    The Christian Medical College, Vellore, in collaboration with Tufts University, Boston, conducted an advanced workshop in e-learning for medical faculty members in India. E-learning can enhance educational reforms for today's computer-literate generation, and keep faculty members up to speed in a rapidly changing world. The purpose of this paper is to report on the design and evaluation of a project-based faculty member development programme focused on developing faculty members as educators and as peer trainers who can use e-learning for educational reforms. During a 2-day workshop, 29 participants in groups of two or three developed 13 e-learning projects for implementation in their institutions. Evaluation of the workshop was through written feedback from the participants at the end of the workshop and by telephone interview with one participant from each project group at the end of one year. Content analysis of qualitative data was perfomed. The participants reported that they were motivated to implement e-learning projects and recognised the need for and usefulness of e-learning. The majority of projects (10 out of 13) that were implemented 'to some extent' or 'to a great extent' faced challenges with a lack of resources and administrative support, but faculty members were able to overcome them. E-learning can enhance educational reforms for today's computer-literate generation IMPLICATIONS: Designing feasible e-learning projects in small groups and obtaining hands-on experience with e-learning tools enhance the effectiveness of subsequent implementation. To successfully incorporate e-learning when designing educational reforms, faculty member training, continuing support and infrastructure facilities are essential. © 2016 John Wiley & Sons Ltd.

  1. CNPC Appoints Chief Experts for Important Technological Projects

    Institute of Scientific and Technical Information of China (English)

    Zhao Jianzhong

    2006-01-01

    @@ On June 27th, China National Petroleum Corporation (CNPC) held a public recruitment to appoint chief experts in Beijing for its important technological projects, which is the first time for CNPC to appoint chief managers by the means of competitive recruitment. This recruitment covers four projects, such as drilling, logging, geophysical survey and ground engineering with 15 projects. Of those,there are 8 drilling projects, which make up 50 percent of all the important technological projects for public recruitment. CNPC expects to further boost the chief expert responsibility system and promote the research and development (R&D) of technological project on the basis of the public recruitment. The company completes the recruitment following the procedure of making announcement, conducting competitive recruitment and giving publicity. On July 25th, the appointment ceremony was held by CNPC and 15 experts were awarded the certificates. CNPC is entering a new stage for the implementation of the technology and talent strategy for the 11th Five-Year Plan. What's more, a new management mode is taking shape for the technological project and for the construction of technological personnel pool.

  2. Public demonstration projects and field trials: Accelerating commercialisation of sustainable technology in solar photovoltaics

    International Nuclear Information System (INIS)

    Brown, James; Hendry, Chris

    2009-01-01

    The paper considers the role of government funded demonstration projects and field trials (DTs) in accelerating the commercialisation of new energy technologies that meet a public good but do not have immediate market appeal [Sagar, A.D., van der Zwaan, B., 2006. Technological innovation in the energy sector: R and D, deployment, and learning-by-doing. Energy Policy 34, 2601-2608]. Drawing on an original database of DTs in the EU, Japan and USA from 1973 to 2004, we review the history of DTs in photovoltaic technology for electricity generation, and its subsequent take up as a commercial energy source. We find that DTs that are aimed purely at discovering suitable market opportunities are less successful in achieving diffusion than projects that target a particular application and concentrate resources on it. The former nevertheless have a vital role to play in the learning process, while a targeted focus is often dependent on national industrial and institutional factors.

  3. NASA's nuclear thermal propulsion technology project

    International Nuclear Information System (INIS)

    Peecook, K.M.; Stone, J.R.

    1992-07-01

    The nonnuclear subsystem technologies required for incorporating nuclear thermal propulsion (NTP) into space-exploration missions are discussed. Of particular interest to planned missions are such technologies as materials, instrumentation and controls, turbomachinery, CFD modeling, nozzle extension designs and models, and analyses of exhaust plumes. NASA studies are described and/or proposed for refractory metals and alloys, robotic NTP controls, and turbopump materials candidates. Alternative nozzle concepts such as aerospikes and truncated plugs are proposed, and numerical simulations are set forth for studying heavy molecules and the backstreaming of highly reactive free-radical hydrogen in the exhaust plume. The critical technologies described in the paper are central to the development of NTP, and NTP has the potential to facilitate a range of space exploration activities. 3 refs

  4. Language and Text-to-Speech Technologies for Highly Accessible Language & Culture Learning

    Directory of Open Access Journals (Sweden)

    Anouk Gelan

    2011-06-01

    Full Text Available This contribution presents the results of the “Speech technology integrated learning modules for Intercultural Dialogue” project. The project objective was to increase the availability and quality of e-learning opportunities for less widely-used and less taught European languages using a user-friendly and highly accessible learning environment. The integration of new Text-to-Speech developments into web-based authoring software for tutorial CALL had a double goal: on the one hand increase the accessibility of e-learning packages, also for learners having difficulty reading (e.g. dyslexic learners or preferring auditory learning; on the other hand exploiting some didactic possibilities of this technology.

  5. Affordable Integrated Technology Projects Science Education towards New Horizons

    Science.gov (United States)

    Paoletti, Franco; Carlucci, Lisa Marie

    2009-03-01

    The new-era concept of education supports a type of instruction whereby technology directly acts as a conduit of change, fundamentally altering what is learned, how it is learned, and the role of the educator in the classroom. In our current world, the learning about technology itself has become a goal and a means to successful participation in today's society. Efficient integration of technology to enhance and support the educational process will: 1) provide educators with the resources and the freedom to actualize innovative educational programs; 2) allow educators to be successful in challenging each student to reach his/her highest potential to ultimately increase academic achievement. This study analyzes what technology integration into education means identifying the benefits and the challenges that educators need to meet in order to be successful in their efforts while providing examples of how to successfully implement effective programs under budgetary constraints.

  6. Photovoltaic technologies and the genesis project

    International Nuclear Information System (INIS)

    Kuwano, Y.

    1994-01-01

    In this paper, the author first presents briefly global environmental problems and energy problems, as well as recent trends in representative types of solar cell. Next, he gives examples of applications for these solar cells, and finally discusses future prospects for solar cells in the form of the GENESIS project. (TEC). 12 figs., 4 refs

  7. Recommender systems for technology enhanced learning research trends and applications

    CERN Document Server

    Manouselis, Nikos; Verbert, Katrien

    2014-01-01

    Presents cutting edge research from leading experts in the growing field of Recommender Systems for Technology Enhanced Learning (RecSys TEL) International contributions are included to demonstrate the merging of various efforts and communities Topics include: Linked Data and the Social Web as Facilitators for TEL Recommender Systems in Research and Practice, Personalised Learning-Plan Recommendations in Game-Based Learning and Recommendations from Heterogeneous Sources in a Technology Enhanced Learning Ecosystem

  8. Service Learning in Medical Education: Project Description and Evaluation

    Science.gov (United States)

    Borges, Nicole J.; Hartung, Paul J.

    2007-01-01

    Although medical education has long recognized the importance of community service, most medical schools have not formally nor fully incorporated service learning into their curricula. To address this problem, we describe the initial design, development, implementation, and evaluation of a service-learning project within a first-year medical…

  9. Perceptions of Teacher Candidates Regarding Project-Based Learning

    Science.gov (United States)

    Baysura, Ozge Deniz; Altun, Sertel; Yucel-Toy, Banu

    2016-01-01

    Problem Statement: Project-based learning (PBL) is a learning and teaching approach that makes students search for new knowledge and skills, helps them overcome real-life questions, and makes them design their own studies and performances. Research in Turkey reveals that teachers are not well-informed about PBL, can not guide students in this…

  10. Learning Disabled College Writers Project, Evaluation Report, 1985-86.

    Science.gov (United States)

    Dunham, Trudy

    This report describes the Learning Disabled College Writer's Project, implemented at the University of Minnesota during the 1985-86 school year and designed to aid learning disabled college students master composition skills through training in the use of microcomputer word processors. Following an executive summary, an introduction states the…

  11. Project Based Learning in Multi-Grade Class

    Science.gov (United States)

    Ciftci, Sabahattin; Baykan, Ayse Aysun

    2013-01-01

    The purpose of this study is to evaluate project based learning in multi-grade classes. This study, based on a student-centered learning approach, aims to analyze students' and parents' interpretations. The study was done in a primary village school belonging to the Centre of Batman, already adapting multi-grade classes in their education system,…

  12. Investigating Science Interest in a Game-Based Learning Project

    Science.gov (United States)

    Annetta, Leonard; Vallett, David; Fusarelli, Bonnie; Lamb, Richard; Cheng, Meng-Tzu; Holmes, Shawn; Folta, Elizabeth; Thurmond, Brandi

    2014-01-01

    The purpose of this study was to examine the effect Serious Educational Games (SEGs) had on student interest in science in a federally funded game-based learning project. It can be argued that today's students are more likely to engage in video games than they are to interact in live, face-to-face learning environments. With a keen eye on…

  13. Facilitating Problem Framing in Project-Based Learning

    Science.gov (United States)

    Svihla, Vanessa; Reeve, Richard

    2016-01-01

    While problem solving is a relatively well understood process, problem framing is less well understood, particularly with regard to supporting students to learn as they frame problems. Project-based learning classrooms are an ideal setting to investigate how teachers facilitate this process. Using participant observation, this study investigated…

  14. Using mobile technologies to give health students access to learning resources in the UK community setting.

    Science.gov (United States)

    Walton, Graham; Childs, Susan; Blenkinsopp, Elizabeth

    2005-12-01

    This article describes a project which explored the potential for mobile technologies to give health students in the community access to learning resources. The purpose included the need to identify possible barriers students could face in using mobile technologies. Another focus was to assess the students perceptions of the importance of being able to access learning resources in the community. This 1-year project used two main approaches for data collection. A review of the literature on mobile technologies in the health context was conducted. This was used in a systematic way to identify key issues and trends. The literature review was used to inform the design and production of a questionnaire. This was distributed to and completed by a group of community health students at Northumbria University, UK. The questionnaire was piloted and there was a 100% completion rate with 49 returned forms. The literature review indicated that most mobile technology applications were occurring in the US. At the time of the review the most prevalent mobile technologies were PDAs, laptops, WAP phones and portable radios with use being concentrated around doctors in the acute sector. A range of advantages and disadvantages to the technology were discovered. Mobile technologies were mainly being used for clinical rather than learning applications. The students showed a low level of awareness of the technology but placed great importance to accessing learning resources from the community. Significant development and changes are taking place in mobile technologies. Since the data collection for this work was completed in 2004 podcasting and videocasting have become significant in mobile learning for health professionals. Librarians will need to address the relevance and implications of m-learning for their practice. Care and consideration needs to be given on the time and resources librarians allocate for the necessary development work around mobile technologies. Collaboration and

  15. Electrical Impedance Tomography Technology (EITT) Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J.

    2014-01-01

    Development of a portable, lightweight device providing two-dimensional tomographic imaging of the human body using impedance mapping. This technology can be developed to evaluate health risks and provide appropriate medical care on the ISS, during space travel and on the ground.

  16. SmartPark Technology Demonstration Project

    Science.gov (United States)

    2013-11-01

    The purpose of FMCSAs SmartPark initiative is to determine the feasibility of a technology for providing truck parking space availability in real time to truckers on the road. SmartPark consists of two phases. Phase I was a field operational test ...

  17. Special Needs, Special Project. Teaching with Technology.

    Science.gov (United States)

    Novelli, Joan

    1993-01-01

    A Chapter 1 school motivated students using technology and the arts. A partnership with the Pennsylvania Academy of the Arts helped students develop cognitive and creative skills while working in concrete ways. Using computers, each class chose an artist, developed a class museum, and exhibited at the student-staffed museum. (SM)

  18. Correlational Study of Project Managers' Competence Experience, Education, and Technology Experience on Project

    Science.gov (United States)

    Hosford, Bryan

    2017-01-01

    Organizations continue to rely on information technology (IT) as a foundational element, yet poor IT project success continues to impact growth and innovation. Research into IT project success is widespread yet has focused on high-level project management attributes, not specific IT solutions. A review of the research literature revealed that the…

  19. The Role of the Project Management Office on Information Technology Project Success

    Science.gov (United States)

    Stewart, Jacob S.

    2010-01-01

    The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

  20. The Student Perspective: Can the Use of Technologies Transform Learning?

    OpenAIRE

    O'Donnell, Eileen

    2010-01-01

    PUBLISHED This chapter explores students? perspectives on the transformations that the use of technology has brought to higher education. The use of technologies in higher education facilitates flexible learning environments but the benefits to students who engage with these technologies will only be realised if the design is pedagogically sound. The pedagogic approach employed by lecturers when designing their e-learning platforms or learning management systems has the cap...

  1. NASA Remediation Technology Collaboration Development Task, Overview and Project Summaries

    Science.gov (United States)

    Romeo, James G.

    2014-01-01

    An overview presentation of NASA's Remediation Technology Collaboration Development Task including the following project summaries: in situ groundwater monitor, in situ chemical oxidation, in situ bioremediation, horizontal multi-port well, and high resolution site characterization.

  2. The Salinas Airshower Learning And Discovery Project (SALAD)

    Science.gov (United States)

    Hernandez, Victor; Niduaza, Rommel; Ruiz Castruita, Daniel; Knox, Adrian; Ramos, Daniel; Fan, Sewan; Fatuzzo, Laura

    2015-04-01

    The SALAD project partners community college and high school STEM students in order to develop and investigate cosmic ray detector telescopes and the physical concepts, using a new light sensor technology based on silicon photomultiplier (SiPM) detectors. Replacing the conventional photomultiplier with the SiPM, offers notable advantages in cost and facilitates more in depth, hands-on learning laboratory activities. The students in the SALAD project design, construct and extensively evaluate the SiPM detector modules. These SiPM modules, can be completed in a short time utilizing cost effective components. We describe our research to implement SiPM as read out light detectors for plastic scintillators in a cosmic ray detector telescope for use in high schools. In particular, we describe our work in the design, evaluation and the assembly of (1) a fast preamplifier, (2) a simple coincidence circuit using fast comparators, to discriminate the SiPM noise signal pulses, and (3) a monovibrator circuit to shape the singles plus the AND logic pulses for subsequent processing. To store the singles and coincidence counts data, an Arduino micro-controller with program sketches can be implemented. Results and findings from our work would be described and presented. US Department of Education Title V Grant Award PO31S090007

  3. Evaluating learning and teaching technologies in further education

    Directory of Open Access Journals (Sweden)

    Ann Jones

    2000-12-01

    Full Text Available There is currently an unprecedented interest in the use of technologies for supporting teaching and learning. In post-compulsory education, the current Government's commitment to increasing access to Lifelong Learning is expressed through a number of initiatives that also affect the further education (FE sector. For example, in The Learning Age: A Renaissance for a New Britain (Stationery Office, 1998 the government outlines its proposal to expand the scale, scope and nature of both further and higher education. The Learning Age follows a number of such government papers that emphasize the importance of Information and Communication Technologies (ICTs or Information and Learning Technologies (ILTs in FE and HE.

  4. PROJECT-BASED LEARNING IN CONSUMER SCIENCES ...

    African Journals Online (AJOL)

    user

    One of the teaching-learning strategies that may .... together in small groups, while sharing ideas ... lecturer and learner when scaffolding pedagogy, .... their roles, interaction and access to resources. ... When using the measure of practical.

  5. Students' Perceptions of Self-Directed Learning and Collaborative Learning with and without Technology

    Science.gov (United States)

    Lee, K.; Tsai, P.-S.; Chai, C. S.; Koh, J. H. L.

    2014-01-01

    This study explored students' perceptions of self-directed learning (SDL) and collaborative learning (CL) with/without technology in an information and communications technology-supported classroom environment. The factors include SDL, CL, SDL supported by technology, and CL supported by technology. Based on the literature review, this study…

  6. Numerical modeling in photonic crystals integrated technology: the COPERNICUS Project

    DEFF Research Database (Denmark)

    Malaguti, Stefania; Armaroli, Andrea; Bellanca, Gaetano

    2011-01-01

    Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project.......Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project....

  7. Providing Formative Feedback: Language Technologies for Lifelong Learning CONSPECT tool

    NARCIS (Netherlands)

    Berlanga, Adriana

    2011-01-01

    Berlanga, A. J. (2011). Providing Formative Feedback: Language Technologies for Lifelong Learning CONSPECT tool. Presentation given at the Onderwijslunch, University of Maastricht. January, 18, 2011, Maastricht, The Netherlands.

  8. Effects of basic character design and animation concepts using the flipped learning and project-based learning approach on learning achievement and creative thinking of higher education students

    Science.gov (United States)

    Autapao, Kanyarat; Minwong, Panthul

    2018-01-01

    Creative thinking was an important learning skill in the 21st Century via learning and innovation to promote students' creative thinking and working with others and to construct innovation. This is one of the important skills that determine the readiness of the participants to step into the complex society. The purposes of this research were 1) to compare the learning achievement of students after using basic character design and animation concepts using the flipped learning and project-based learning and 2) to make a comparison students' creative thinking between pretest and posttest. The populations were 29 students in Multimedia Technology program at Thepsatri Rajabhat University in the 2nd semester of the academic year 2016. The experimental instruments were lesson plans of basic character design and animation concepts using the flipped learning and project based learning. The data collecting instrument was creative thinking test. The data were analyzed by the arithmetic mean, standard deviation and The Wilcoxon Matched Pairs Signed-Ranks Test. The results of this research were 1) the learning achievement of students were statistically significance of .01 level and 2) the mean score of student's creativity assessment were statistically significance of .05 level. When considering all of 11 KPIs, showed that respondents' post-test mean scores higher than pre-test. And 5 KPIs were statistically significance of .05 level, consist of Originality, Fluency, Elaboration, Resistance to Premature Closure, and Intrinsic Motivation. It's were statistically significance of .042, .004, .049, .024 and .015 respectively. And 6 KPIs were non-statistically significant, include of Flexibility, Tolerance of Ambiguity, Divergent Thinking, Convergent Thinking, Risk Taking, and Extrinsic Motivation. The findings revealed that the flipped learning and project based learning provided students the freedom to simply learn on their own aptitude. When working together with project

  9. Learning by Doing: the Progressive Novella Project.

    Science.gov (United States)

    Conroy, Michael G.

    1996-01-01

    States that the Progressive Novella Project for high school students involves the collaborative writing of a 35-50 page novella. Explains that prior to the actual writing process, students are educated in the basic elements of fiction writing. Describes the division of labor into groups. Comments that the results of the project are invariably…

  10. Airlie House Pollution Prevention Technology Transfer pilot projects

    Energy Technology Data Exchange (ETDEWEB)

    Thuot, J.R.; Myron, H.; Gatrone, R.; McHenry, J.

    1996-08-01

    The projects were a series of pilot projects developed for DOE with the intention of transferring pollution prevention technology to private industry. The concept was to develop small technology transfer initiatives in partnership with the private sector. Argonne National Laboratory developed three projects: the microscale chemistry in education program, the microscale cost benefit study, and the Bethel New Life recycling trainee program. The two microscale chemistry projects focused on introducing microscale chemistry technologies to secondary and college education. These programs were inexpensive to develop and received excellent evaluations from participants and regulators. The recycle trainee project provided training for two participants and identified recycling and source reduction opportunities in Argonne`s solid waste stream. The pilot projects demonstrated that technology transfer initiatives can be developed and implemented with a small budget and within a short period of time. The essential components of the pilot projects were identification of target technologies that were already available, identification of target audiences, and a focus of effort to achieve a limited but defined objective.

  11. Incorporating the Technology Roadmap Uncertainties into the Project Risk Assessment

    International Nuclear Information System (INIS)

    Bonnema, B.E.

    2002-01-01

    This paper describes two methods, Technology Roadmapping and Project Risk Assessment, which were used to identify and manage the technical risks relating to the treatment of sodium bearing waste at the Idaho National Engineering and Environmental Laboratory. The waste treatment technology under consideration was Direct Vitrification. The primary objective of the Technology Roadmap is to identify technical data uncertainties for the technologies involved and to prioritize the testing or development studies to fill the data gaps. Similarly, project management's objective for a multi-million dollar construction project includes managing all the key risks in accordance to DOE O 413.3 - ''Program and Project Management for the Acquisition of Capital Assets.'' In the early stages, the Project Risk Assessment is based upon a qualitative analysis for each risk's probability and consequence. In order to clearly prioritize the work to resolve the technical issues identified in the Technology Roadmap, the issues must be cross- referenced to the project's Risk Assessment. This will enable the project to get the best value for the cost to mitigate the risks

  12. Learning Word Subsumption Projections for the Russian Language

    Directory of Open Access Journals (Sweden)

    Ustalov Dmitry

    2016-01-01

    Full Text Available The semantic relations of hypernymy and hyponymy are widely used in various natural language processing tasks for modelling the subsumptions in common sense reasoning. Since the popularisation of the distributional semantics, a significant attention is paid to applying word embeddings for inducing the relations between words. In this paper, we show our preliminary results on adopting the projection learning technique for computing hypernyms from hyponyms using word embeddings. We also conduct a series of experiments on the Russian language and release the open source software for learning hyponym-hypernym projections using both CPUs and GPUs, implemented with the TensorFlow machine learning framework.

  13. Generalized projective synchronization of chaotic systems via adaptive learning control

    International Nuclear Information System (INIS)

    Yun-Ping, Sun; Jun-Min, Li; Hui-Lin, Wang; Jiang-An, Wang

    2010-01-01

    In this paper, a learning control approach is applied to the generalized projective synchronisation (GPS) of different chaotic systems with unknown periodically time-varying parameters. Using the Lyapunov–Krasovskii functional stability theory, a differential-difference mixed parametric learning law and an adaptive learning control law are constructed to make the states of two different chaotic systems asymptotically synchronised. The scheme is successfully applied to the generalized projective synchronisation between the Lorenz system and Chen system. Moreover, numerical simulations results are used to verify the effectiveness of the proposed scheme. (general)

  14. Approaches to Teaching Plant Nutrition. Children's Learning in Science Project.

    Science.gov (United States)

    Leeds Univ. (England). Centre for Studies in Science and Mathematics Education.

    During the period 1984-1986, over 30 teachers from the Yorkshire (England) region have worked in collaboration with the Children's Learning in Science Project (CLIS) developing and testing teaching schemes in the areas of energy, particle theory, and plant nutrition. The project is based upon the constructivist approach to teaching. This document…

  15. Using Pamphlets to Teach Biochemistry: A Service-Learning Project

    Science.gov (United States)

    Harrison, Melinda A.; Dunbar, David; Lopatto, David

    2013-01-01

    A service-learning project appropriate for a biochemistry or advanced biochemistry course was designed and implemented. The project involved students partnering with a homeless shelter to design informational pamphlets to be displayed at the shelter for the clients' use. The pamphlet topics were based on diseases studied within the course.…

  16. Collaborative learning and cyber-cooperation in multidisciplinary projects

    NARCIS (Netherlands)

    Reijenga, J.C.; Siepe, A.H.M.; Yu, L.E.; Wang, C.H.

    2003-01-01

    In order to stimulate international cooperation in collaborative learning, a pilot project was initiated in which students from different disciplines (3 TU/e departments), at different Universities (TU/e and the National University of Singapore) worked together on a project, using information

  17. A Project-based Learning approach for teaching Robotics to ...

    African Journals Online (AJOL)

    In this research we used a project-based learning approach to teach robotics basics to undergraduate business computing students. The course coverage includes basic electronics, robot construction and programming using arduino. Students developed and tested a robot prototype. The project was evaluated using a ...

  18. A Contest-Oriented Project for Learning Intelligent Mobile Robots

    Science.gov (United States)

    Huang, Hsin-Hsiung; Su, Juing-Huei; Lee, Chyi-Shyong

    2013-01-01

    A contest-oriented project for undergraduate students to learn implementation skills and theories related to intelligent mobile robots is presented in this paper. The project, related to Micromouse, Robotrace (Robotrace is the title of Taiwanese and Japanese robot races), and line-maze contests was developed by the embedded control system research…

  19. Learning from case studies and monitoring of Dutch tunnel projects

    NARCIS (Netherlands)

    Korff, M.

    2017-01-01

    Individuals and project-based organisations in the construction industry can learn in a (more) systematic way from case studies and the monitoring of underground construction works. Underground construction projects such as tunnels and excavations suffer as much or more from failure costs

  20. The Project-Based Learning Approach in Environmental Education

    Science.gov (United States)

    Genc, Murat

    2015-01-01

    The purpose of this study is to investigate the effect of project-based learning on students' attitudes toward the environment. In the study that was performed with 39 students who take the "Environmental Education" course, attitude changes toward the environment were investigated in students who developed projects on environmental…

  1. Soft Assembling Project-Based Learning and Leadership in Japan

    Science.gov (United States)

    Knight, Kevin; Murphey, Tim

    2017-01-01

    In this article, we initially focus on how the conceptualization of leadership by Knight (2013a) in his leadership seminars became the basis for choosing a project-based learning (PBL) approach. We then consider how soft assembling can enhance the leadership project activities of student teams and group-work in general classes. Soft assembling…

  2. Creating Student Engagement: The Kickstarter Active Learning Project

    Science.gov (United States)

    Manzon, Elliott

    2017-01-01

    Students can become disengaged from marketing material if they cannot see the direct application. Marketing material needs to be applied to a meaningful business task to engage and motivate students. This article introduces the Kickstarter Active Learning Project--an innovative semester-long project in which students create a Kickstarter…

  3. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff perceptions of…

  4. The ECLSS Advanced Automation Project Evolution and Technology Assessment

    Science.gov (United States)

    Dewberry, Brandon S.; Carnes, James R.; Lukefahr, Brenda D.; Rogers, John S.; Rochowiak, Daniel M.; Mckee, James W.; Benson, Brian L.

    1990-01-01

    Viewgraphs on Environmental Control and Life Support System (ECLSS) advanced automation project evolution and technology assessment are presented. Topics covered include: the ECLSS advanced automation project; automatic fault diagnosis of ECLSS subsystems descriptions; in-line, real-time chemical and microbial fluid analysis; and object-oriented, distributed chemical and microbial modeling of regenerative environmental control systems description.

  5. Blogs: Enhancing the Learning Experience for Technology Students

    OpenAIRE

    Birney, Rosanne

    2006-01-01

    Weblogs can be used to enhance the learning experience for technology students, by providing them with several features that are often absent in Learning Management Systems (LMSs). This research aims to demonstrate that weblogs can improve the learning experience by allowing students to reflect on their learning, and by allowing them to easily collaborate with their tutors and with one another. The incorporation of weblogs into the existing learning environment can provide several enhancemen...

  6. Exploring an experiential learning project through Kolb's Learning Theory using a qualitative research method

    Science.gov (United States)

    Yuk Chan, Cecilia Ka

    2012-08-01

    Experiential learning pedagogy is taking a lead in the development of graduate attributes and educational aims as these are of prime importance for society. This paper shows a community service experiential project conducted in China. The project enabled students to serve the affected community in a post-earthquake area by applying their knowledge and skills. This paper documented the students' learning process from their project goals, pre-trip preparations, work progress, obstacles encountered to the final results and reflections. Using the data gathered from a focus group interview approach, the four components of Kolb's learning cycle, the concrete experience, reflection observation, abstract conceptualisation and active experimentation, have been shown to transform and internalise student's learning experience, achieving a variety of learning outcomes. The author will also explore how this community service type of experiential learning in the engineering discipline allowed students to experience deep learning and develop their graduate attributes.

  7. History and Future of Technology-Enhanced Learning

    NARCIS (Netherlands)

    Westera, Wim

    2009-01-01

    Westera, W. (2009). History and Future of Technology-Enhanced Learning. Keynote Presentation at the First International Conference on Software, Services & Semantic Technologies (3ST). October, 28, 2009, Sofia, Bulgaria.

  8. Survey on Multimedia Technologies for Mobile Learning Applications

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2009-01-01

    Full Text Available Mobile technologies are developing very fast. This paper presents a survey on multimedia technologies for mobile learning applications, focusing on multimedia programming techniques for Windows Mobile, Symbian, and Java ME.

  9. Learning through a Game - Exploring Fun and Learning in a Project Management Game

    OpenAIRE

    Hansen, Daniel Sollie; Storjord, David

    2016-01-01

    The goal of this thesis is to explore the teaching capabilities of games by motivating players through fun. We do this by first exploring perspectives of fun and learning in games; project management concepts and previous games. From these findings we implement our own game prototype where the player learns project management concepts simultaneously as they learn the game. This prototype is then evaluated through a number of experiments. Finally we discuss the results of the experiments and c...

  10. Utilization of Information and Communication Technologies in Mathematics Learning

    Directory of Open Access Journals (Sweden)

    Farzaneh Saadati

    2014-07-01

    Full Text Available Attention to integrate technology in teaching and learning has provided a major transformation in the landscape of education. Therefore, many innovations in teaching and learning have been technology-driven. The study attempted to examine what is engineering students’ perception regarding the use of Information and Communication Technologies (ICT in mathematics learning as well as investigate their opinion about how ICT can be integrated to improve teaching and learning processes. The subjects were Iranian engineering students from two universities. The finding showed they are fully aware of importance of ICT in teaching and learning mathematics. Whilst, they were feeling comfortable and confident with technology, they do not have more experience of using technology in mathematics classes before. The findings supported the other studies, which indicated the potentials of ICT to facilitate students’ learning, improve teaching, and enhance institutional administration as established in the literature.

  11. A Technology-based Model for Learning

    Directory of Open Access Journals (Sweden)

    Michael Williams

    2004-12-01

    Full Text Available The Math Emporium, opened in 1997, is an open 7000-squaremeter facility with 550+ workstations arranged in an array of widely spaced hexagonal "pods", designed to support group work at the same time maintaining an academic air. We operate it 24/7 with math support personnel in attendance 12 hours per day. Students have access to online course resources at all times, from anywhere. We have used this unique asset to transform traditional classroom-based courses into technology based learning programs that have no class meetings at all. The structure of the program is very different from the conventional one, having a new set of expectations and motivations. The results include: more effective students, substantial cost savings, economies of scale and scope and a stream-lined process for creating new on-line courses.

  12. Problem-based and project-oriented learning

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Teodorescu, Remus; Chen, Zhe

    2005-01-01

    . Generally, the content of the curriculum should be more expanded without extra study time. This paper presents a teaching approach, which makes it possible very fast for the students to obtain in-depth skills into new research areas, and this method is the problem-oriented and project-based learning....... In this paper the necessary skills for power electronic engineers are outlined that is followed up by a description on how the problem-oriented and project-based learning are implemented. A complete curriculum in power electronics and drives at Aalborg University is presented where different power electronics...... related projects at different study levels also are presented....

  13. ASPECTS OF USING CLOUD TECHNOLOGIES IN VIRTUAL LEARNING ENVIRONMENT

    OpenAIRE

    ZHVANIA, Taliko; KAPANADZE, David; KIKNADZE, Mzia; TANDILASHVILI, George

    2016-01-01

    Thereare increased using the e-Learning technologies at the modern institutions ofhigher education, which favored to integrate the various instruments in thevirtual learning environment. Recently,the cloud technologies have become the most popular, which offer e-Learninginternet technologies based dynamical and actual new opportunities to theeducational institutions. The cloud technologies provide a high level of theservice and they impact on the design of the training courses, offered servic...

  14. Research Notes ~ Lessons from an International e-Learning Project

    Directory of Open Access Journals (Sweden)

    Paul Breen

    2007-11-01

    Full Text Available This paper offers a critical examination of an e-learning project in the context of a Distance Education training program delivered to teacher trainers by an external university in Rwanda. In examining the successes and failures of the project, it uses a framework based on ideas promulgated by Moore (1995 and strives to provide guidance and reference for future projects in this field.

  15. Overview of autoventing turbine technology development project

    International Nuclear Information System (INIS)

    Waldrop, W.R.

    1991-01-01

    This paper reports on low concentrations of dissolved oxygen (DO) in the discharge of hydro plants which represents one of the most significant environmental concerns confronting the hydropower industry. This is especially of concern to utilities attempting to relicense older plants and to build new facilities. One method which shows promise is the autoventing turbine (AVT). The concept of an AVT involves air to be aspirated into the water as it passes through the turbine whenever concentrations of DO are less than desired. Because of this simple and natural process of aeration, the AVT promises to be more cost efficient and reliable than any of the other techniques. This has been demonstrated through experimentation at TVA's Norris Dam. An applied research project is being conducted to develop experimental and numerical methods to allow for reliable design and deployment of this new environmentally improved hydroturbine. TVA is providing overall coordination for this research which is being performed cooperatively with the U.S. Army Corps of Engineers, the U.S. Bureau of Reclamation, and the Iowa Institute of Hydraulic Research. This applied research project is fully integrated with a scale model test program jointly supported and conducted by TVA and Voith Hydro to test alternative locations for venting air into replacement turbine runners for Norris Dam

  16. Teacher Education Program Learning Technologies and Knowledge (Tac at the Pedagogical University Experimental Libertador Core Barinas (Venezuela

    Directory of Open Access Journals (Sweden)

    Oscar Antonio Martínez Molina

    2016-08-01

    Full Text Available The objective of this research is to propose a teacher training program of Learning Technologies and Knowledge (TAC at the Pedagogic University Libertador Barinas centre (Venezuela. This work is framed as a feasible project, supported by a descriptive field research. It was determined that teacher training programs Learning Technologies and Communication require an organizational structure, which should be under the figure of a coordination that is responsible for organizing everything related to the development of these projects.

  17. Project-Based Learning to Promote Effective Learning in Biotechnology Courses

    Directory of Open Access Journals (Sweden)

    Farahnaz Movahedzadeh

    2012-01-01

    Full Text Available With enrollment in the fields of science, technology, engineering, and mathematics (STEM shrinking, teachers are faced with the problem of appealing to a new generation of students without sacrificing educational quality. Evidence has shown that this problem can be reduced with the use of a number of pedagogical strategies of which project-based learning (PBL is one. PBL addresses the fundamental challenge of increasing students’ motivation, their mastery of course material, and finding applications for what they have learned to apply in various situations. This study demonstrates the benefits of redesigning a standard lab-based molecular biology course to create a more effective learning environment. Using PBL, students who enrolled in Bio-251 at Harold Washington College in Chicago were given the responsibility of cloning a bacterial gene from one species into a new host species. They were then tasked with the expression and purification of the resulting protein for future research purposes at University of Illinois-Chicago, a leading 4-year research institute. With use of the PBL method, students showed improvement in the areas of self-confidence, lab technical skills, and interest in STEM-related fields and, most of all, the students showed a high level of performance and satisfaction.

  18. Technology Investments in the NASA Entry Systems Modeling Project

    Science.gov (United States)

    Barnhardt, Michael; Wright, Michael; Hughes, Monica

    2017-01-01

    The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

  19. Technology Transfer and Outreach for SNL/Rochester ALPHA Project.

    Energy Technology Data Exchange (ETDEWEB)

    Sinars, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    This report describes the next stage goals and resource needs for the joint Sandia and University of Rochester ARPA-E project. A key portion of this project is Technology Transfer and Outreach, with the goal being to help ensure that this project develops a credible method or tool that the magneto-inertial fusion (MIF) research community can use to broaden the advocacy base, to pursue a viable path to commercial fusion energy, and to develop other commercial opportunities for the associated technology. This report describes an analysis of next stage goals and resource needs as requested by Milestone 5.1.1.

  20. Ceramic Technology Project semiannual progress report, October 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-09-01

    This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

  1. Korea-China Optical Technology Research Centre Project

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

    2004-06-01

    The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields

  2. Korea-China Optical Technology Research Centre Project

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

    2004-06-15

    The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields.

  3. Continued multidisciplinary project-based learning - implementation in health informatics.

    Science.gov (United States)

    Wessel, C; Spreckelsen, C

    2009-01-01

    Problem- and project-based learning are approved methods to train students, graduates and post-graduates in scientific and other professional skills. The students are trained on realistic scenarios in a broader context. For students specializing in health informatics we introduced continued multidisciplinary project-based learning (CM-PBL) at a department of medical informatics. The training approach addresses both students of medicine and students of computer science. The students are full members of an ongoing research project and develop a project-related application or module, or explore or evaluate a sub-project. Two teachers guide and review the students' work. The training on scientific work follows a workflow with defined milestones. The team acts as peer group. By participating in the research team's work the students are trained on professional skills. A research project on a web-based information system on hospitals built the scenario for the realistic context. The research team consisted of up to 14 active members at a time, who were scientists and students of computer science and medicine. The well communicated educational approach and team policy fostered the participation of the students. Formative assessment and evaluation showed a considerable improvement of the students' skills and a high participant satisfaction. Alternative education approaches such as project-based learning empower students to acquire scientific knowledge and professional skills, especially the ability of life-long learning, multidisciplinary team work and social responsibility.

  4. Mobile Learning and Integration of Mobile Technologies in Education

    Science.gov (United States)

    Keengwe, Jared; Bhargava, Malini

    2014-01-01

    Mobile technologies have a huge potential to transform education provided these technologies are designed and implemented in such a way that they are relevant to the social and cultural context of learning. Clearly, the application, implementation, and design of mobile technology in the global educational context pose technological and…

  5. Improving IT Project Portfolio Management: Lessons Learned

    DEFF Research Database (Denmark)

    Pedersen, Keld

    2013-01-01

    The IT PPM improvement process is not well understood, and our knowledge about what makes IT PPM improvement succeed or fail is not well developed. This article presents lessons learned from organizations trying to improve their IT PPM practice. Based on this research IT PPM practitioners are adv...

  6. Measuring the influence of Cooperative Learning and Project Based Learning on problem solvin skill.

    OpenAIRE

    García Martín, Javier; Pérez Martínez, Jorge Enrique

    2011-01-01

    The aim of this study is to evaluate the effects obtained after applying two active learning methodologies (cooperative learning and project based learning) to the achievement of the competence problem solving. This study was carried out at the Technical University of Madrid, where these methodologies were applied to two Operating Systems courses. The first hypothesis tested was whether the implementation of active learning methodologies favours the achievement of ?problem solving?. The secon...

  7. Future Ready Learning: Reimagining the Role of Technology in Education. 2016 National Education Technology Plan

    Science.gov (United States)

    Thomas, Susan

    2016-01-01

    The National Education Technology Plan is the flagship educational technology policy document for the United States. The 2016 Plan, "Future Ready Learning: Reimagining the Role of Technology in Education," articulates a vision of equity, active use, and collaborative leadership to make everywhere, all-the-time learning possible. While…

  8. Learning Practice and Technology: Extending the Structurational Practice Lens to Educational Technology Research

    Science.gov (United States)

    Halperin, Ruth

    2017-01-01

    Scholars in the field of educational technology have been calling for robust use of social theory within learning technology research. In view of that, interest has been noted in applying Giddens' structuration theory to the understanding of human interaction with technology in learning settings. However, only few such attempts have been published…

  9. Does Technology Acceptance Affect E-Learning in a Non-Technology-Intensive Course?

    Science.gov (United States)

    Buche, Mari W.; Davis, Larry R.; Vician, Chelley

    2012-01-01

    Prior research suggests that individuals' technology acceptance levels may affect their work and learning performance outcomes when activities are conducted through information technology usage. Most previous research investigating the relationship between individual attitudes towards technology and learning has been conducted in…

  10. Use of Computer Technology for English Language Learning: Do Learning Styles, Gender, and Age Matter?

    Science.gov (United States)

    Lee, Cynthia; Yeung, Alexander Seeshing; Ip, Tiffany

    2016-01-01

    Computer technology provides spaces and locales for language learning. However, learning style preference and demographic variables may affect the effectiveness of technology use for a desired goal. Adapting Reid's pioneering Perceptual Learning Style Preference Questionnaire (PLSPQ), this study investigated the relations of university students'…

  11. Learning from participatory design projects across industries

    DEFF Research Database (Denmark)

    Broberg, Ole; Souza da Conceição, Carolina

    2017-01-01

    Summative Statement: A preliminary framework for participatory design projects (PDP) was developed based on a retrospective analysis of five PDPs across different industries. The framework may serve as a guidance for planning and conducting PDPs. Problem statement: A growing number of experiences...... with participatory design or participatory ergonomics projects have been gained within the field of macro-ergonomics. It is suggested that the Participatory Ergonomics Framework (PEF) validated by Haines et al. (2002) needs to be updated based on these experiences and hence more focussed on design activities....... Research Objective / Question: The objective of this study was to update and design-orient the PEF based on experiences with PDPs within the last ten years. Methodology: Five participatory design projects across different industries were systematically analyzed and compared in order to develop a framework...

  12. Do we need teachers as designers of technology enhanced learning?

    NARCIS (Netherlands)

    Kirschner, Paul A.

    2016-01-01

    In this special issue, five teams of researchers discuss different aspects of the teacher as designer of technology enhanced learning situations. This final contribution critically discusses if and how teachers as designers of technology enhanced learning might (not) be feasible or even desirable.

  13. Modernising Education and Training: Mobilising Technology for Learning

    Science.gov (United States)

    Attewell, Jill; Savill-Smith, Carol; Douch, Rebecca; Parker, Guy

    2010-01-01

    In recent years there have been amazing advances in consumer technology. The Mobile Learning Network (MoLeNET) initiative has enabled colleges and schools to harness some of this technology in order to modernise aspects of teaching, learning and training. The result has been improvements in learner engagement, retention, achievement and…

  14. A Professional Learning Model Supporting Teachers to Integrate Digital Technologies

    Science.gov (United States)

    Sheffield, Rachel; Blackley, Susan; Moro, Paul

    2018-01-01

    Contemporary teachers have an obligation to support and scaffold students' learning in digital technologies and to do this in authentic contexts. In order for teachers to be successful in this, their own competency in digital technologies needs to be high, and their own 21st century learning skills of communication, collaboration, creativity and…

  15. Middle School Students' Motivation for Learning Technology in South Korea

    Science.gov (United States)

    Kwon, Hyuksoo

    2016-01-01

    This study aims to develop a feasible instrument for determining middle school students' motivation to learn technology in South Korea. The authors translated Glynn's motivational instrument and modified it to measure Korean middle school students' motivation to learn technology. The instrument was applied to 441 students of grade 8 and 9 from six…

  16. Technology for French Learning: A Mismatch between Expectations and Reality

    Science.gov (United States)

    Karabulut, Aliye; Levelle, Kimberly; Li, Jinrong; Suvorov, Ruslan

    2012-01-01

    The qualitative study reported in this article explored the use of technology for language learning in a third-year French class at a public university in the Midwest of the USA. To address the need for a more holistic study of technology for language learning (Basharina, 2007; Thorne, 2003), an Activity Theory framework was employed to…

  17. Gender Difference of Confidence in Using Technology for Learning

    Science.gov (United States)

    Yau, Hon Keung; Cheng, Alison Lai Fong

    2012-01-01

    Past studies have found male students to have more confidence in using technology for learning than do female students. Males tend to have more positive attitudes about the use of technology for learning than do females. According to the Women's Foundation (2006), few studies examined gender relevant research in Hong Kong. It also appears that no…

  18. The Future of Learning Technology: Some Tentative Predictions

    Science.gov (United States)

    Rushby, Nick

    2013-01-01

    This paper is a snapshot of an evolving vision of what the future may hold for learning technology. It offers three personal visions of the future and raises many questions that need to be explored if learning technology is to realise its full potential.

  19. Distributed Scaffolding: Synergy in Technology-Enhanced Learning Environments

    Science.gov (United States)

    Ustunel, Hale H.; Tokel, Saniye Tugba

    2018-01-01

    When technology is employed challenges increase in learning environments. Kim et al. ("Sci Educ" 91(6):1010-1030, 2007) presented a pedagogical framework that provides a valid technology-enhanced learning environment. The purpose of the present design-based study was to investigate the micro context dimension of this framework and to…

  20. Teacher Candidate Technology Integration: For Student Learning or Instruction?

    Science.gov (United States)

    Clark, Cynthia; Zhang, Shaoan; Strudler, Neal

    2015-01-01

    Transfer of instructional technology knowledge for student-centered learning by teacher candidates is investigated in this study. Using the transfer of learning theoretical framework, a mixed methods research design was employed to investigate whether secondary teacher candidates were able to transfer the instructional technology knowledge for…