Surface dimpling on rotating work piece using rotation cutting tool

Science.gov (United States)

Bhapkar, Rohit Arun; Larsen, Eric Richard

2015-03-31

A combined method of machining and applying a surface texture to a work piece and a tool assembly that is capable of machining and applying a surface texture to a work piece are disclosed. The disclosed method includes machining portions of an outer or inner surface of a work piece. The method also includes rotating the work piece in front of a rotating cutting tool and engaging the outer surface of the work piece with the rotating cutting tool to cut dimples in the outer surface of the work piece. The disclosed tool assembly includes a rotating cutting tool coupled to an end of a rotational machining device, such as a lathe. The same tool assembly can be used to both machine the work piece and apply a surface texture to the work piece without unloading the work piece from the tool assembly.

Fractal dimension analysis of complexity in Ligeti piano pieces

Science.gov (United States)

Bader, Rolf

2005-04-01

Fractal correlation dimensional analysis has been performed with whole solo piano pieces by Gyrgy Ligeti at every 50ms interval of the pieces. The resulting curves of development of complexity represented by the fractal dimension showed up a very reasonable correlation with the perceptional density of events during these pieces. The seventh piece of Ligeti's ``Musica ricercata'' was used as a test case. Here, each new part of the piece was followed by an increase of the fractal dimension because of the increase of information at the part changes. The second piece ``Galamb borong,'' number seven of the piano Etudes was used, because Ligeti wrote these Etudes after studying fractal geometry. Although the piece is not fractal in the strict mathematical sense, the overall structure of the psychoacoustic event-density as well as the detailed event development is represented by the fractal dimension plot.

Immediate loading with single-piece implant following extraction

Directory of Open Access Journals (Sweden)

Hemlata Dwivedi

2017-01-01

Full Text Available Although dental implantology had evolved over a number of years, many dental surgeons are unaware of the concept of immediate loading with the use of one-piece implant that began in the early 1960s. The goal of successful prosthodontics rehabilitation is to provide function, esthetics, and comfort to the patient. The aim of this literature is to provide an overview of one-piece implant, with its advantages and disadvantages over conventional two-piece implant. Immediate prosthetic of a one-piece system allows for a better tissue healing and better adhesion of gingival mucosa to form a collar which is healthy and adherent to the implant, avoiding a second surgical procedure, and also includes a very important aspect esthetics. This article describes a case report of immediate loading with single-piece implant following extraction.

Underwater transporting method and device for incore structure cutting piece

International Nuclear Information System (INIS)

Kurosawa, Koichi; Chiba, Noboru; Chiba, Isao; Takada, Hiroshi; Furukawa, Hideyasu; Chiba, Noboru.

1996-01-01

Cutting pieces are handled by using a pick-up device connected with a wire ropes, a take-up drum, chains and a winch as cutting piece handling means, and moved freely on the water surface by a propulsion machine of a transporting means of the device to transfer them under water to a predetermined position. The pick-up device is lifted by taking-up the rope by the rotation of the take-up drum using chain-driving by way of the winch and the chains. The cut pieces are stored in a cask by lowering them in the cask and releasing the handling. In addition, if the weight of the cut pieces is recognized before cutting, and the load of the weight of the cut pieces is applied to the device previously, the balance of the device and the cut pieces can be kept, and cut pieces can be transported under water always stably. Further, if the cut pieces are supported upon cutting operation, the cut pieces are made stable, and cutting operation with good efficiency can be attained. (N.H.)

Exfoliation syndrome: assembling the puzzle pieces.

Science.gov (United States)

Pasquale, Louis R; Borrás, Terete; Fingert, John H; Wiggs, Janey L; Ritch, Robert

2016-09-01

To summarize various topics and the cutting edge approaches to refine XFS pathogenesis that were discussed at the 21st annual Glaucoma Foundation Think Tank meeting in New York City, Sept. 19-20, 2014. The highlights of three categories of talks on cutting edge research in the field were summarized. Exfoliation syndrome (XFS) is a systemic disorder with a substantial ocular burden, including high rates of cataract, cataract surgery complications, glaucoma and retinal vein occlusion. New information about XFS is akin to puzzle pieces that do not quite join together to reveal a clear picture regarding how exfoliation material (XFM) forms. Meeting participants concluded that it is unclear how the mild homocysteinemia seen in XFS might contribute to the disarrayed extracellular aggregates characteristic of this syndrome. Lysyl oxidase-like 1 (LOXL1) variants are unequivocally genetic risk factors for XFS but exactly how these variants contribute to the assembly of exfoliation material (XFM) remains unclear. Variants in a new genomic region, CACNA1A associated with XFS, may alter calcium concentrations at the cell surface and facilitate XFM formation but much more work is needed before we can place this new finding in proper context. It is hoped that various animal model and ex vivo systems will emerge that will allow for proper assembly of the puzzle pieces into a coherent picture of XFS pathogenesis. A clear understanding of XFS pathogenesis may lead to 'upstream solutions' to reduce the ocular morbidity produced by XFS. © 2015 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Last piece of ATLAS takes the plunge

CERN Multimedia

2008-01-01

On Friday 29 February the second small wheel was lowered 100 metres underground into the ATLAS cavern in front of a captivated audience. Although called the "small wheels" they are small in name only - each wheel is 9.3 metres in diameter and weighs 100 tonnes including the massive shielding elements. This piece completes ATLAS’ muon spectrometer, which has the ability to accurately track particles to the width of a human hair. The first piece of ATLAS was installed in 2003 and, five years later, this small wheel is the final large piece of the detector to take the subterranean voyage to its final resting place.

29 CFR 1910.177 - Servicing multi-piece and single piece rim wheels.

Science.gov (United States)

2010-07-01

...” and “Multi-piece Rim Matching Chart,” or any other poster which contains at least the same... procedure shall include at least the following elements: (1) Tires shall be completely deflated before... and follow that procedure. The procedure shall include at least the following elements: (1) Tires...

75 FR 28051 - Public Workshop: Pieces of Privacy

Science.gov (United States)

2010-05-19

... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be...

Archaeology of Chilean pre-hispanic pieces using induced x-ray fluorescence

Energy Technology Data Exchange (ETDEWEB)

Morales, J.R.; Dinator, M.I. [Universidad de Chile, Facultad de Ciencias, Santiago (Chile); Tellez, F. [Universidad Catolica del Norte, I.I.A. San Pedro de Atacama (Chile)

2001-09-01

Full text: One of the most famous archaeological sites of Chile is San Pedro de Atacama in the north Andean highlands. The site, 68.23 W, 22.89 S, is close to the border lines with Argentina and Bolivia and was occupied by different cultures in the past like Atacameos and lately by Incas in s. X V. About a century later Hispanic explorers visited the zone. The area is rich in tombs and remains. Due to the abundance of minerals, metallurgy was practiced by pre-Hispanic cultures. This work is part of a study concerning the characterization of metallic artifacts found in several excavations. The elemental composition can help in determining the provenance of the pieces, and the metallurgical techniques used. A set of twenty pieces including hatchets, knifes, chisels, maces and bells were analyzed by X ray fluorescence induced by photons of 59.5 keV provided by a source of Am-241. Detection of Mn, Fe, Ni, Cu, As, Zr, Ag, Sn, Sb, Ba, and Pb has allowed determination of their provenance. (Author)

Archaeology of Chilean pre-hispanic pieces using induced x-ray fluorescence

International Nuclear Information System (INIS)

Morales, J.R.; Dinator, M.I.; Tellez, F.

2001-01-01

Full text: One of the most famous archaeological sites of Chile is San Pedro de Atacama in the north Andean highlands. The site, 68.23 W, 22.89 S, is close to the border lines with Argentina and Bolivia and was occupied by different cultures in the past like Atacameos and lately by Incas in s. X V. About a century later Hispanic explorers visited the zone. The area is rich in tombs and remains. Due to the abundance of minerals, metallurgy was practiced by pre-Hispanic cultures. This work is part of a study concerning the characterization of metallic artifacts found in several excavations. The elemental composition can help in determining the provenance of the pieces, and the metallurgical techniques used. A set of twenty pieces including hatchets, knifes, chisels, maces and bells were analyzed by X ray fluorescence induced by photons of 59.5 keV provided by a source of Am-241. Detection of Mn, Fe, Ni, Cu, As, Zr, Ag, Sn, Sb, Ba, and Pb has allowed determination of their provenance. (Author)

7 CFR 51.1435 - U.S. Commercial Pieces.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. Commercial Pieces. 51.1435 Section 51.1435 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Grades of Shelled Pecans Grades § 51.1435 U.S. Commercial Pieces. The...

Eight piece quadrupole magnet, method for aligning quadrupole magent pole tips

Science.gov (United States)

Jaski, Mark S.; Liu, Jie; Donnelly, Aric T.; Downey, Joshua S.; Nudell, Jeremy J.; Jain, Animesh

2018-01-30

The invention provides an alternative to the standard 2-piece or 4-piece quadrupole. For example, an 8-piece and a 10-piece quadrupole are provided whereby the tips of each pole may be adjustable. Also provided is a method for producing a quadrupole using standard machining techniques but which results in a final tolerance accuracy of the resulting construct which is better than that obtained using standard machining techniques.

[Study on quality standards of decoction pieces of salt Alpinia].

Science.gov (United States)

Li, Wenbing; Hu, Changjiang; Long, Lanyan; Huang, Qinwan; Xie, Xiuqiong

2010-12-01

To establish the quality criteria for decoction pieces of salt Alpinia. Decoction pieces of salt Alpinia were measured with moisture, total ash, acid-insoluble ash, water-extract and volatile oils according to the procedures recorded in the Chinese Pharmacopoeia 2010. The content of Nootkatone was determined by HPLC, and NaCl, by chloridion electrode method. We obtained results of total ash, acid-insoluble ash, water-extract and volatile oils of 10 batches of decoction pieces of salt Alpinia moisture; Meanwhile we set the HPLC and chloridion electrode method. This research established a fine quality standard for decoction pieces of salt Alpinia.

Prediction of hardness in pieces of quenched and tempered steel

International Nuclear Information System (INIS)

Yanzon, Rodolfo Carlos; Rodriguez, Augusto; Sanchez, Arlington Ricardo

2006-01-01

This presentation describes the first stage of a work plan to obtain a simple software, for predicting properties at certain points of a quenched and tempered piece. In this first stage, this prediction is limited to cylindrical pieces made with steels whose chemical composition is within a certain range. The methodology basically consists of obtaining , from experimental data, a mathematical tool able to predict the hardness value, for Jominy test piece ends made with this type of steel. This meant beginning with the analysis of the usual forms of theoretical calculation of Jominy curves of quenched samples, which resulted in a proposal to modify the Just equation. Two different mathematical methods were then developed, that could predict hardness values in tempered Jominy test pieces. One, based on the determination of polynomic equations, that reproduces the loss of hardness at points along the test piece, base on the quenching value and as a function of the tempering temperature. The other one, which uses the lineal multidimensional interpolation method, because of its ease of application, has been selected as the mathematical tool to use in the software under development. At this stage of the work, the relationship between the points on the piece and those on the Jominy test pieces is carried out by the Lamont method and the representative variable of the temperature/time combination for the tempering process itself, is obtained with software based on the Hollomon and Jaffe expression. Data is needed to define: a) chemical composition and grain size of the steel used, b) diameter of the piece, c) 'H G ' severity of the quenching medium d) temperature and time of the tempering. The work's second stage continued with the addition of hardness values measured in Jominy test pieces made with other steels. The chemical composition and grain size data of each steel introduced are converted by the software into one more variable, using the concept of ideal critical

Last piece of the puzzle for ATLAS

CERN Multimedia

Clare Ryan

At around 15.40 on Friday 29th February the ATLAS collaboration cracked open the champagne as the second of the small wheels was lowered into the cavern. Each of ATLAS' small wheels are 9.3 metres in diameter and weigh 100 tonnes including the massive shielding elements. They are the final parts of ATLAS' muon spectrometer. The first piece of ATLAS was installed in 2003 and since then many detector elements have journeyed down the 100 metre shaft into the ATLAS underground cavern. This last piece completes this gigantic puzzle.

Individuality in harpsichord performance: disentangling performer- and piece-specific influences on interpretive choices.

Science.gov (United States)

Gingras, Bruno; Asselin, Pierre-Yves; McAdams, Stephen

2013-01-01

Although a growing body of research has examined issues related to individuality in music performance, few studies have attempted to quantify markers of individuality that transcend pieces and musical styles. This study aims to identify such meta-markers by discriminating between influences linked to specific pieces or interpretive goals and performer-specific playing styles, using two complementary statistical approaches: linear mixed models (LMMs) to estimate fixed (piece and interpretation) and random (performer) effects, and similarity analyses to compare expressive profiles on a note-by-note basis across pieces and expressive parameters. Twelve professional harpsichordists recorded three pieces representative of the Baroque harpsichord repertoire, including three interpretations of one of these pieces, each emphasizing a different melodic line, on an instrument equipped with a MIDI console. Four expressive parameters were analyzed: articulation, note onset asynchrony, timing, and velocity. LMMs showed that piece-specific influences were much larger for articulation than for other parameters, for which performer-specific effects were predominant, and that piece-specific influences were generally larger than effects associated with interpretive goals. Some performers consistently deviated from the mean values for articulation and velocity across pieces and interpretations, suggesting that global measures of expressivity may in some cases constitute valid markers of artistic individuality. Similarity analyses detected significant associations among the magnitudes of the correlations between the expressive profiles of different performers. These associations were found both when comparing across parameters and within the same piece or interpretation, or on the same parameter and across pieces or interpretations. These findings suggest the existence of expressive meta-strategies that can manifest themselves across pieces, interpretive goals, or expressive devices.

Individuality in harpsichord performance: Disentangling performer- and piece-specific influences on interpretive choices

Directory of Open Access Journals (Sweden)

Bruno eGingras

2013-11-01

Full Text Available Although a growing body of research has examined issues related to individuality in music performance, few studies have attempted to quantify markers of individuality that transcend pieces and musical styles. This study aims to identify such meta-markers by discriminating between influences linked to specific pieces or interpretive goals and performer-specific playing styles, using two complementary statistical approaches: linear mixed models (LMMs to estimate fixed (piece and interpretation and random (performer effects, and similarity analyses to compare expressive profiles on a note-by-note basis across pieces and expressive parameters. Twelve professional harpsichordists recorded three pieces representative of the Baroque harpsichord repertoire, including three interpretations of one of these pieces, each emphasizing a different melodic line, on an instrument equipped with a MIDI console. Four expressive parameters were analyzed: articulation, note onset asynchrony, timing, and velocity. LMMs showed that piece-specific influences were much larger for articulation than for other parameters, for which performer-specific effects were predominant, and that piece-specific influences were generally larger than effects associated with interpretive goals. Some performers consistently deviated from the mean values for articulation and velocity across pieces and interpretations, suggesting that global measures of expressivity may in some cases constitute valid markers of artistic individuality. Similarity analyses detected significant associations among the magnitudes of the correlations between the expressive profiles of different performers. These associations were found both when comparing across parameters and within the same piece or interpretation, or on the same parameter and across pieces or interpretations. These findings suggest the existence of expressive meta-strategies that can manifest themselves across pieces, interpretive goals, or

Image analysis of multiple moving wood pieces in real time

Science.gov (United States)

Wang, Weixing

2006-02-01

This paper presents algorithms for image processing and image analysis of wood piece materials. The algorithms were designed for auto-detection of wood piece materials on a moving conveyor belt or a truck. When wood objects on moving, the hard task is to trace the contours of the objects in n optimal way. To make the algorithms work efficiently in the plant, a flexible online system was designed and developed, which mainly consists of image acquisition, image processing, object delineation and analysis. A number of newly-developed algorithms can delineate wood objects with high accuracy and high speed, and in the wood piece analysis part, each wood piece can be characterized by a number of visual parameters which can also be used for constructing experimental models directly in the system.

Mine cross piece

Energy Technology Data Exchange (ETDEWEB)

Belik, I P; Gorbatenko, A Ye

1982-01-01

The mine cross piece includes main and supplementary parachute-formed cupolas made of air-impermeable fabric, resources for attachment made in the form of shroud lines. In order to improve its reliability with prolonged localization of an underground fire, the cavity between the cupolas connects to the source of fast-hardening material. In this case the cupolas are arranged co-directionally in relation to each other, while the shroud lines of the main are attached to the cupola of the supplemental which is made with perforations.

Prediction of work piece geometry in electrochemical cavity sinking

Energy Technology Data Exchange (ETDEWEB)

Riggs, J B; Muller, R H; Tobias, C W

1981-01-01

A computer-implemented model for predicting ECM work piece geometry has been developed and experimentally verified with a commercial ECM machine for cavity sinking in copper and 302-stainless steel with 2N KNO/sub 3/ electrolyte. Constant tool piece feed rates of 7-10 x 10/sup -4/ cm/s, and applied voltages of 11-25 V were used. The model predicts the dependence of work piece geometry on operating conditions and on the electrochemical and physical properties of the metal-electrolyte pair. Comparison of eight equilibrium and six unsteady state experimental cavity profiles in copper showed satisfactory agreement with predictions, as did five equilibrium profiles for cavity sinking in 302-stainless steel.

Contrast enhancement of mail piece images

Science.gov (United States)

Shin, Yong-Chul; Sridhar, Ramalingam; Demjanenko, Victor; Palumbo, Paul W.; Hull, Jonathan J.

1992-08-01

A New approach to contrast enhancement of mail piece images is presented. The contrast enhancement is used as a preprocessing step in the real-time address block location (RT-ABL) system. The RT-ABL system processes a stream of mail piece images and locates destination address blocks. Most of the mail pieces (classified into letters) show high contrast between background and foreground. As an extreme case, however, the seasonal greeting cards usually use colored envelopes which results in reduced contrast osured by an error rate by using a linear distributed associative memory (DAM). The DAM is trained to recognize the spectra of three classes of images: with high, medium, and low OCR error rates. The DAM is not forced to make a classification every time. It is allowed to reject as unknown a spectrum presented that does not closely resemble any that has been stored in the DAM. The DAM was fairly accurate with noisy images but conservative (i.e., rejected several text images as unknowns) when there was little ground and foreground degradations without affecting the nondegraded images. This approach provides local enhancement which adapts to local features. In order to simplify the computation of A and (sigma) , dynamic programming technique is used. Implementation details, performance, and the results on test images are presented in this paper.

The smaller the pieces the healthier their consumption

DEFF Research Database (Denmark)

Hansen, Pelle Guldborg; Skov, Katrine Lund; Schmidt, Karsten

the snack breaks. The hypothesis was that consumers could be nudged to healthier food choices by improving accessibility to sliced apples and make a “healthier” cake portion (small) the default. The sample consisted of 391 people attending a congress in Copenhagen, Denmark. People were divided in two groups...... for snacking during breaks, and were informed that this was for logistic reasons. Two snack tables were set up, one with normal sized pieces of cake (usual sizes provided by the caterer) as well as whole apples (control N=189), and a table with halved pieces of cake as well as apples served in quarter pieces....... This pilot study supports the hypothesis that the presentation of snacks plays an important role in the consumption of fruit and cake among Danish adults. Further, it suggests that such approach could become a supportive tool set for achieving PHN objectives....

[Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

Science.gov (United States)

Xiao, Yong-Qing; Li, Li; Liu, Ying; Ma, Yin-Lian; Yu, Ding-Rong

2016-01-01

To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance. Copyright© by the Chinese Pharmaceutical Association.

World's third-largest producer of nuclear power. Japan in need of energy

International Nuclear Information System (INIS)

Anon.

2008-01-01

Japan is the third largest oil consumer in the world behind the United States and China, and the second largest net importer of oil. Japan boasts one of the largest economies in the world. The country continues to experience a moderate economic recovery that began in 2003, following a decade of economic stagnation. Japan's real gross domestic product (GDP) grew by 2.5% in 2005 and 2.3% in 2004. The modest upturn over the last few years reflects higher business confidence in Japan, a surge in export demand led by exports to China, and robust consumer spending. Unemployment in Japan fell to 4.4% in 2005, down from an early 2003 peak of 5.5%. Japan has virtually no domestic oil or natural gas reserves, and in 2005 was the second largest net importer of crude oil in the world. Despite the country's dearth of hydrocarbon resources, Japanese companies have actively pursued upstream oil and natural gas projects overseas. Japan remains one of the major exporters of energy-sector capital equipment, and Japanese companies provide engineering, construction, and project management services for energy projects. (orig.)

A Piece of Paper Falling Faster than Free Fall

Science.gov (United States)

Vera, F.; Rivera, R.

2011-01-01

We report a simple experiment that clearly demonstrates a common error in the explanation of the classic experiment where a small piece of paper is put over a book and the system is let fall. This classic demonstration is used in introductory physics courses to show that after eliminating the friction force with the air, the piece of paper falls…

Collide@CERN: exclusive open rehearsal of Gilles Jobin's last piece

CERN Multimedia

2012-01-01

Collide@CERN and Gilles Jobin, artist in residency at CERN, present an exclusive open rehearsal of his last piece SPIDER GALAXIES Tuesday 31 July 2012 - A new piece created to open new territories of the mind - Join us in Restaurant 1 from 4 p.m. (next to the Glass Box Restaurant) With this piece, the body turns into matter, which is complete, spatial and sensual. Come and see Gilles Jobin and his dancers. With a score by Cristian Vogel and Carla Scaletti invoking sound particles, while Daniel Demont disperses the spectrum. Protean, infinitely large or infinitesimal, such are the Spider Galaxies.    

A piece of paper falling faster than free fall

International Nuclear Information System (INIS)

Vera, F; Rivera, R

2011-01-01

We report a simple experiment that clearly demonstrates a common error in the explanation of the classic experiment where a small piece of paper is put over a book and the system is let fall. This classic demonstration is used in introductory physics courses to show that after eliminating the friction force with the air, the piece of paper falls with acceleration g. To test if the paper falls behind the book in a nearly free fall motion or if it is dragged by the book, we designed a version of this experiment that includes a ball and a piece of paper over a book that is forced to fall using elastic cords. We recorded a video of our experiment using a high-speed video camera at 300 frames per second that shows that the book and the paper fall faster than the ball, which falls well behind the book with an acceleration approximately equal to g. Our experiment shows that the piece of paper is dragged behind the book and therefore the paper and book demonstration should not be used to show that all objects fall with acceleration g independently of their mass.

A piece of paper falling faster than free fall

Energy Technology Data Exchange (ETDEWEB)

Vera, F; Rivera, R, E-mail: fvera@ucv.cl [Instituto de Fisica, Pontificia Universidad Catolica de ValparaIso, Av. Universidad 330, Curauma, ValparaIso (Chile)

2011-09-15

We report a simple experiment that clearly demonstrates a common error in the explanation of the classic experiment where a small piece of paper is put over a book and the system is let fall. This classic demonstration is used in introductory physics courses to show that after eliminating the friction force with the air, the piece of paper falls with acceleration g. To test if the paper falls behind the book in a nearly free fall motion or if it is dragged by the book, we designed a version of this experiment that includes a ball and a piece of paper over a book that is forced to fall using elastic cords. We recorded a video of our experiment using a high-speed video camera at 300 frames per second that shows that the book and the paper fall faster than the ball, which falls well behind the book with an acceleration approximately equal to g. Our experiment shows that the piece of paper is dragged behind the book and therefore the paper and book demonstration should not be used to show that all objects fall with acceleration g independently of their mass.

Industry remains stuck in a transitional mode

International Nuclear Information System (INIS)

Garb, F.A.

1991-01-01

The near future for industry remains foggy for several obvious reasons. The shake-up of the Soviet Union and how the pieces will reform remains unclear. How successful efforts are to privatize government oil company operations around the world has yet to be determined. A long sought peace in the Middle East seems to be inching closer, but will this continue? If it does continue, what impact will it have on world energy policy? Will American companies, which are now transferring their attention to foreign E and P, also maintain an interest in domestic activities? Is the U.S. economy really on the upswing? We are told that the worst of the recession is over, but try telling this to thousands of workers in the oil patch who are being released monthly by the big players in domestic operations. This paper reports that 1992 should be a better year than 1991, if measured in opportunity. There are more exploration and acquisition options available, both domestically and internationally, than there have been in years. Probably more opportunities exist than there are players-certainly more than can be funded with current financial resources

Feminist Erotica and Agency @ The Love Piece Club

OpenAIRE

DALES, Laura

2008-01-01

The Love Piece Club is a shop devoted to sex goods for women, located in Tokyo and online at www.lovepiececlub.com. As well as online shopping, the website offers regular columns, articles and photo-essays on subjects related to sexuality and women's lives. The site and shop are managed by Kitahara Minori, a writer, businesswoman and advocate for feminist erotica. This paper explores the Love Piece Club as a discursive site – its potential meanings and its significance as a feminist work in p...

Alveolar Bone Resorption Evaluation Around Single-piece Designed Bicortical Implants, Using Immediate Loading Protocol, Based on Orthopantomographs

Directory of Open Access Journals (Sweden)

Száva Dániel-Tamás

2017-12-01

Full Text Available Background: Inserting dental implants in severely atrophied jawbones is a great challenge for the dental practitioner. There are an increasing number of patients who choose dental implantanchored prosthetic restorations despite compromised bone quality and quantity. There have been numerous attempts in adapting implant design for the atrophic crestal bone. One-piece, needle-type basal implant design is a typical design for these cases. These implants are inserted in the remaining compact bone located in the basal aspect of the jawbones. If high primary stability is achieved, these implants are used for immediate loading protocol. From many points of view, this technique is based on contradictory principles compared to classic implant surgery and loading protocols. The aim of this study was to investigate the long-term success of basal one-piece short-diameter dental implants used for immediate loading protocol.

Archaeological analogous and industrials for deep storage: study of the archaeological metallic piece; Analogos arqueologicos e industriales para almacenamientos profundos: estudio de piezas arqueologicas metalicas

Energy Technology Data Exchange (ETDEWEB)

Criado Portal, A J; Martinez Garcia, J A; Calabres Molina, R; Garcia abajo, A; Penco Valenzuela, F; Lecanda Esteban, J A; Garcia Bartual, M; Jimenez Gonzalez, J M; Bravo Munoz, E; Rodriguez Lobo, L M; Fernandez Cascos, T; Fernandes Cordero, O; Montero Ruiz, I

2000-07-01

The aim of present research is to obtain information about archaeological analogous of iron and steel, useful for the model of deep geological repository (AGP). The analogous examined have remained buried between 1400 and 2400 years, in very assorted geochemical environments. The extraction of the archaeological pieces has been accomplished according to normalised protocols, trying to carry to the laboratory so the piece as its burial environment, avoiding all possible pollution. Trying to the archaeological analogous could provide valuable information to the AGP model, the study has been directed to related the physical-chemical characteristics of the terrain respect to the deterioration of the archaeological metallic piece. The geology of the surrounding terrain to the archaeological deposit, the geomorphological study of the terrain and data from the analysis of ground: pH, wetness, porosity, organic matter contents, bacteria presence, sulphates, carbonates, chlorides, etc., have allowed to explain the physical-chemical phenomena suffered by the archaeological iron and steel pieces. Also, an exhaustive study of the archaeological piece has been accomplished, concerning the microstructure of the corrosion layer and of the not deteriorated metallic rest. Obtained information concerns different items, such as corrosion velocity and formations of oxide layers, diffusion of chemical elements from the corrosion layer to the metal and viceversa, and structural changes in oxide layers and in the metallic remains by structural ageing. Obtained data have allowed to develop a mathematical model for calculation of corrosion velocity in buried iron and steels, based on physical-chemical variables of grounds, chemical composition and thermomechanical treatment given to the metal during its manufacture. (Author)

Measurement of behavior of secondary sealing areas of rotary engine apex seals - Two-piece nonsplit and three-piece slanted horizontal split types

Science.gov (United States)

Matsuura, Kenji; Terasaki, Kazuo; Yamane, Katsuki

1992-12-01

Behavior measurements have been made with two displacement sensors and an underseal pressure sensor, using an overhanging eccentric shaft-type single-rotor research engine equipped with a packaged multichannel slip ring. The two-piece seal was tilted to the leading and trailing sides of a seal slot during its travel along the rotor housing surface and vibrated on the top end of the leading side of the slot as a fulcrum after the shift from the trailing to the leading side of the slot after the minor axis on the spark plug side. As for the three-piece seal, its top part was also tilted in all operating conditions, although its bottom part made effective area contact with the side of the slot under light load conditions up to medium engine speeds. The working chamber pressure was induced in the underseal in the same manner as with the two-piece type.

Y-piece temperature and humidification during mechanical ventilation.

Science.gov (United States)

Solomita, Mario; Daroowalla, Feroza; Leblanc, Deniese S; Smaldone, Gerald C

2009-04-01

Practitioners often presume there is adequate humidification in the ventilator circuit if the Y-piece is at a specified temperature, but control of Y-piece temperature may be inadequate to ensure adequate humidification. In an in vitro bench model we measured water-vapor delivery with several heated humidification setups and a wide range of minute volume (V (E)) values. The setup included a condenser, hygrometry, and thermometer. First, we calibrated the system with a point-source humidifier and water pump. Then we tested the water-vapor delivery during non-heated-wire humidification and during heated-wire humidification with a temperature gradient of +3 degrees C, 0 degrees C, and -3 degrees C between the humidifier and the Y-piece. We compared the results to 2 recommended humidification values: 100% saturated (absolute humidity 44 mg H(2)O/L) gas at 37 degrees C (saturated/37 degrees C); and 75% saturated (absolute humidity 33 mg H(2)O/L), which is the humidity recommended by the International Organization for Standardization (the ISO standard). In all the experiments the setup was set to provide 35 degrees C at the Y-piece. Our method for measuring water-vapor delivery closely approximated the amount delivered by a calibrated pump, but slightly underestimated the water-vapor delivery in all the experiments and the whole V (E) range. At all V (E) values, water-vapor delivery during non-heated-wire humidification matched or exceeded saturated/37 degrees C and was significantly greater than that during heated-wire humidification. During heated-wire humidification, water-vapor delivery varied with the temperature gradient and did not reach saturated/37 degrees C at V (E) > 6 L/min. Water-vapor delivery with the negative temperature gradient was below the ISO standard. Maintaining temperature at one point in the inspiratory circuit (eg, Y-piece), does not ensure adequate water-vapor delivery. Other factors (humidification system, V (E), gradient setting) are critical

Optimization of Process Parameters During End Milling and Prediction of Work Piece Temperature Rise

Directory of Open Access Journals (Sweden)

Bhirud N.L.

2017-09-01

Full Text Available During the machining processes, heat gets generated as a result of plastic deformation of metal and friction along the tool–chip and tool–work piece interface. In materials having high thermal conductivity, like aluminium alloys, large amount of this heat is absorbed by the work piece. This results in the rise in the temperature of the work piece, which may lead to dimensional inaccuracies, surface damage and deformation. So, it is needed to control rise in the temperature of the work piece. This paper focuses on the measurement, analysis and prediction of work piece temperature rise during the dry end milling operation of Al 6063. The control factors used for experimentation were number of flutes, spindle speed, depth of cut and feed rate. The Taguchi method was employed for the planning of experimentation and L18 orthogonal array was selected. The temperature rise of the work piece was measured with the help of K-type thermocouple embedded in the work piece. Signal to noise (S/N ratio analysis was carried out using the lower-the-better quality characteristics. Depth of cut was identified as the most significant factor affecting the work piece temperature rise, followed by spindle speed. Analysis of variance (ANOVA was employed to find out the significant parameters affecting the work piece temperature rise. ANOVA results were found to be in line with the S/N ratio analysis. Regression analysis was used for developing empirical equation of temperature rise. The temperature rise of the work piece was calculated using the regression equation and was found to be in good agreement with the measured values. Finally, confirmation tests were carried out to verify the results obtained. From the confirmation test it was found that the Taguchi method is an effective method to determine optimised parameters for minimization of work piece temperature.

T-piece resuscitator versus self-inflating bag for preterm resuscitation: an institutional experience.

Science.gov (United States)

Jayaram, Archana; Sima, Adam; Barker, Gail; Thacker, Leroy R

2013-07-01

Manual ventilation in the delivery room is provided with devices such as self-inflating bags (SIBs), flow-inflating bags, and T-piece resuscitators. To compare the effect of type of manual ventilation device on overall response to resuscitation among preterm neonates born at Apgar score. Secondary outcomes were incidence of air leaks, need for chest compressions/epinephrine, need for intubation, and surfactant use. We identified 294 resuscitations requiring ventilation. SIB was used for 135 neonates, and T-piece was used for 159 neonates. There was no significant difference between the 1-min and 5-min Apgar scores between SIB and T-piece (P = .77 and P = .11, respectively), nor were there significant differences in secondary outcomes. The rate of rise of Apgar score was higher, by 0.47, with T-piece, compared to SIB (95% CI 0.08-0.87, P = .02). Although some manikin studies favor T-piece for providing reliable and consistent pressures, our experience did not indicate significant differences in effectiveness of resuscitation between the T-piece and SIB in preterm resuscitations.

[Application of traditional Chinese medicine reference standards in quality control of Chinese herbal pieces].

Science.gov (United States)

Lu, Tu-Lin; Li, Jin-Ci; Yu, Jiang-Yong; Cai, Bao-Chang; Mao, Chun-Qin; Yin, Fang-Zhou

2014-01-01

Traditional Chinese medicine (TCM) reference standards plays an important role in the quality control of Chinese herbal pieces. This paper overviewed the development of TCM reference standards. By analyzing the 2010 edition of Chinese pharmacopoeia, the application of TCM reference standards in the quality control of Chinese herbal pieces was summarized, and the problems exiting in the system were put forward. In the process of improving the quality control level of Chinese herbal pieces, various kinds of advanced methods and technology should be used to research the characteristic reference standards of Chinese herbal pieces, more and more reasonable reference standards should be introduced in the quality control system of Chinese herbal pieces. This article discussed the solutions in the aspect of TCM reference standards, and future development of quality control on Chinese herbal pieces is prospected.

NICHD Research Networks Help Piece Together the Puzzle of Polycystic Ovary Syndrome

Science.gov (United States)

... Print NICHD research networks help piece together the puzzle of polycystic ovary syndrome Many people think that ... more like putting together a thousand-piece jigsaw puzzle. Except that you can’t check the cover ...

Nuclear reactor fuel element containing an end piece for maintaining the column of fuel pellets

International Nuclear Information System (INIS)

Pajot, Jacques; Rabellino, Jacques.

1974-01-01

The nuclear reactor fuel element described has an end piece for maintaining the column of fuel pellets in position inside the element cladding. This end piece has a central compression spring one end of which presses against the pellets and the other against a plug shaped piece fitted with a seat for the spring, a conical piece with an elastic ring around it diverging towards the end in contact with the spring and a head at the opposite end. The connection between the compression spring and the pellets is through an application piece. A central bore provided in the end piece helps balance the pressure inside the element. This element is particularly intended for liquid metal cooled fast neutron reactors [fr

Loy Yang A - Australia's largest privatisation

International Nuclear Information System (INIS)

Yenckin, C.

1997-01-01

The recent A$4,746 million privatisation of the 2000MW Loy Yang A power station and the Loy Yang coal mine by the Victorian Government is Australia's largest privatisation and one of 1997's largest project financing deals. (author)

Investigation and recovery of unrecovered fuel pellets and cladding tube pieces

International Nuclear Information System (INIS)

Kobayashi, Keiji

1980-01-01

The total weight of the fuel pellets lost due to break was about 1206 g, and cladding tube pieces were about 217 g. Among these, the pellets of about 527 g and the cladding tube pieces of about 152 g were recovered when broken fuel rods were discovered. It is not desirable to leave these broken pieces as unrecovered in view of safety and the management of nuclear fuel materials. Kansai Electric Power Co., Inc., investigated the position and the amount of these pellets and cladding tube pieces for about a year, and recovered a part of them. The results were written in two reports. The objects of the investigation and recovery, and the method of recovery are explained. The UO 2 and zirconium recovered were 58.52 g and 369.58 g, respectively. The solid pellets were recovered from the reactor, fuel assemblies, a spent fuel pit and canals, and the content in sludge was recovered from other installations. The amounts of unrecovered pellets and cladding tube pieces in primary cooling water, coolant filters, sealing water filters, primary cooling pipes, waste resins and fuel assemblies were estimated. The problems concerning the recovery and estimation are pointed out. The results of estimating the amount of uranium in coolant filters and sealing water filters are useful to know the time of the occurrence of accident. (Kako, I.)

Piece of the sun

CERN Document Server

Wayne, Teddy

2015-01-01

Our rapidly industrialising world has an insatiable hunger for energy, and conventional sources are struggling to meet demand. Oil is running out, coal is damaging our climate, many nations are abandoning nuclear, yet solar, wind and water will never be a complete replacement. The solution, says Daniel Clery in this deeply researched and revelatory book, is to be found in the original energy source: the Sun itself. There, at its centre, the fusion of 630 million tonnes of hydrogen every second generates an unfathomable amount of energy. By replicating even a tiny piece of the Sun's power

Classification of archaeological pieces into their respective stratum by a chemometric model based on the soil concentration of 25 selected elements

International Nuclear Information System (INIS)

Carrero, J.A.; Goienaga, N.; Fdez-Ortiz de Vallejuelo, S.; Arana, G.; Madariaga, J.M.

2010-01-01

The aim of this work was to demonstrate that an archaeological ceramic piece has remained buried underground in the same stratum for centuries without being removed. For this purpose, a chemometric model based on Principal Component Analysis, Soft Independent Modelling of Class Analogy and Linear Discriminant Analysis classification techniques was created with the concentration of some selected elements of both soil of the stratum and soil adhered to the ceramic piece. Some ceramic pieces from four different stratigraphic units, coming from a roman archaeological site in Alava (North of Spain), and its respective stratum soils were collected. The soil adhered to the ceramic pieces was removed and treated in the same way as the soil from its respective stratum. The digestion was carried out following the US Environmental Pollution Agency EPA 3051A method. A total of 54 elements were determined in the extracts by a rapid screening inductively coupled plasma mass spectrometry method. After rejecting the major elements and those which could have changed from the original composition of the soils (migration or retention from/to the buried objects), the following elements (25) were finally taken into account to construct the model: Li, V, Co, As, Y, Nb, Sn, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Au, Th and U. A total of 33 subsamples were treated from 10 soils belonging to 4 different stratigraphic units. The final model groups and discriminate them in four groups, according to the stratigraphic unit, having both the stratum and soils adhered to the pieces falling down in the same group.

Rehabilitation of large maxillary defect with two-piece maxillary obturators

Directory of Open Access Journals (Sweden)

Kanchan P Dholam

2015-01-01

Full Text Available The insertion and removal of an obturator in large maxillary defects with or without trismus is difficult. Fabrication of a two-piece obturator in such cases overcomes this problem. This article describes rehabilitation of large maxillary defects with two piece maxillary obturator of three types. All these obturators have a maxillary plate and a bulb component, which are approximated together by various techniques namely, silicone cover, embedded magnets, and press studs. Prosthetic rehabilitation of large maxillary defects with two-piece obturators offers the possibility of adequate oral rehabilitation by fabricating light weight prosthesis, which is easy to use. The bulb covers the undercut areas of the defect enhancing the facial contour and retention. It facilitates easy examination of underlying tissues, recreation of the anatomic barrier between the oral and nasal cavities and restoration of the function and esthetics. Thus, it adds to the quality of life.

The Effect of High Versus Low Teacher Affect and Passive Versus Active Student Activity During Music Listening on Preschool Children's Attention, Piece Preference, Time Spent Listening, and Piece Recognition.

Science.gov (United States)

Sims, Wendy L.

1986-01-01

Small-group listening lessons and subsequent individual posttests were used to judge 94 three- through five-year-old subjects' attention, paired-comparison piece preference, time spent listening, and piece recognition. Research procedures included a modified multiple baseline design and split-screen video taping of instructional sessions.…

An analysis of the alleged skeletal remains of Carin Göring.

Directory of Open Access Journals (Sweden)

Anna Kjellström

Full Text Available In 1991, treasure hunters found skeletal remains in an area close to the destroyed country residence of former Nazi leader Hermann Göring in northeastern Berlin. The remains, which were believed to belong to Carin Göring, who was buried at the site, were examined to determine whether it was possible to make a positive identification. The anthropological analysis showed that the remains come from an adult woman. The DNA analysis of several bone elements showed female sex, and a reference sample from Carin's son revealed mtDNA sequences identical to the remains. The profile has one nucleotide difference from the Cambridge reference sequence (rCRS, the common variant 263G. A database search resulted in a frequency of this mtDNA sequence of about 10% out of more than 7,000 European haplotypes. The mtDNA sequence found in the ulna, the cranium and the reference sample is, thus, very common among Europeans. Therefore, nuclear DNA analysis was attempted. The remains as well as a sample from Carin's son were successfully analysed for the three nuclear markers TH01, D7S820 and D8S1179. The nuclear DNA analysis of the two samples revealed one shared allele for each of the three markers, supporting a mother and son relationship. This genetic information together with anthropological and historical files provides an additional piece of circumstantial evidence in our efforts to identify the remains of Carin Göring.

One Piece Orbitozygomatic Approach Based on the Sphenoid Ridge Keyhole

DEFF Research Database (Denmark)

Spiriev, Toma; Poulsgaard, Lars; Fugleholm, Kåre

2016-01-01

The one-piece orbitozygomatic (OZ) approach is traditionally based on the McCarty keyhole. Here, we present the use of the sphenoid ridge keyhole and its possible advantages as a keyhole for the one-piece OZ approach. Using transillumination technique the osteology of the sphenoid ridge...... was examined on 20 anatomical dry skull specimens. The results were applied to one-piece OZ approaches performed on freshly frozen cadaver heads. We defined the center of the sphenoid ridge keyhole as a superficial projection on the lateral skull surface of the most anterior and thickest part of the sphenoid...... ridge. It was located 22 mm (standard deviation [SD], 0.22 mm) from the superior temporal line; 10.7 mm (SD, 0.08 mm) posterior and 7.1 mm (SD, 0.22 mm) inferior to the frontozygomatic suture. The sphenoid ridge burr hole provides exposure of frontal, temporal dura as well as periorbita, which...

Investigation of Method for Changing Impression of Musical Piece by Changing its Tempo

Science.gov (United States)

Fukumoto, Makoto; Okamatsu, Keita; Matsuo, Kazuhisa

We propose a simple method that changes impression of musical piece by changing its tempo and investigate psycho-physiological effects of the method with listening experiment. In the experiment, 8 subjects listened same musical pieces with various tempi, and analysis of heartbeat and Semantic-Differential method were used. In 6 out of 10 adjective pairs, inverted-U shapes were observed, and peak tempi of them were different. Moreover, “relaxed” evaluation might be related to listener's heart rate in rest. These results suggest possibility of constructing novel media player that changes impression of musical piece.

Two-phase flow measurements with advanced instrumented spool pieces and local conductivity probes

International Nuclear Information System (INIS)

Turnage, K.G.; Davis, C.E.

1979-01-01

A series of two-phase, air-water and steam-water tests performed with instrumented spool pieces and with conductivity probes obtained from Atomic Energy of Canada, Ltd. is described. The behavior of the three-beam densitometer, turbine meter, and drag flowmeter is discussed in terms of two-phase models. Application of some two-phase mass flow models to the recorded spool piece data is made and preliminary results are shown. Velocity and void fraction information derived from the conductivity probes is presented and compared to velocities and void fractions obtained using the spool piece instrumentation

Product management of making large pieces through Rapid Prototyping PolyJet® technology

Science.gov (United States)

Belgiu, G.; Cărăuşu, C.; Şerban, D.; Turc, C. G.

2017-08-01

The rapid prototyping process has already become a classic manufacturing process for parts and assemblies, either polymeric or metal parts. Besides the well-known advantages and disadvantages of the process, the use of 3D printers has a great inconvenience: the overall dimensions of the parts are limited. Obviously, there is a possibility to purchase a larger (and more expensive) 3D printer, but there are always larger pieces to be manufactured. One solution to this problem is the splitting of parts into several components that can be manufactured. The component parts can then be assembled in a single piece by known methods such as welding, gluing, screwing, etc. This paper shows our experience in making large pieces on the Strarasys® Objet24 printer, pieces larger than the tray sizes. The results obtained are valid for any 3D printer using the PolyJet® process.

Application of SFM and laser scanning technology to the description of mosaics piece by piece

Directory of Open Access Journals (Sweden)

O. Ajioka

2014-06-01

Full Text Available Mosaic floors of surviving buildings in Ostia have been mainly recorded in photographs. From 2008, Japanese research group carries out a project of 3d measuring of the whole structure of ancient Roman city Ostia using laser scanners, including its landscape, city blocks, streets, buildings, wall paintings and mosaics. The laser scanner allows for a more detailed analysis and a greater potential for recording mosaics. We can record the data of mosaics, which are described piece by piece. However it is hard to acquire enough high dense point cloud and the internal camera of the laser scanner produce low quality images. We introduce a possible technology of 3D recording of mosaics with high-quality colour information; SFM. The use of this technique permits us to create 3D models from images provided from a CCD camera without heavy and large laser scanners. We applied SFM system to different three types of the mosaics laid down on the floors of "the House of the Dioscuroi", "the Insula of the Muse" and "the House of Jove and Ganymede", and created high resolution orthographic images. Then we examined to compare these orthographic images with that are created from the point cloud data. As a result, we confirmed that SFM system has sufficient practical utility for the mosaic research. And we present how much of density of point cloud or ground resolution are required for the documentation of mosaics accurately.

Autoinflation Leading to Failure of Two-Piece Ambicor Implantable Penile Prosthesis: An Outcome from a Methodical Treatment of Recalcitrant Stuttering Priapism

Directory of Open Access Journals (Sweden)

R. Charles Welliver

2014-01-01

Full Text Available Introduction. We present the case of a patient who received a two-piece Ambicor penile prosthesis for idiopathic recurrent “stuttering” priapism refractory to other treatment options. The patient returned unable to deflate the device due to an interesting anatomically induced mechanical failure. Aims. To describe the method and findings of this inflatable prosthesis failure. Results. Prosthesis failure occurred due to restrictive corporal diameter and the unique characteristics of fluid reservoir location in the two-piece inflatable prosthesis. The patient was successfully converted to a semirigid prosthesis with resolution of the pain that was due to his prosthesis autoinflation. Conclusion. Stuttering priapism remains a challenging clinical problem. Penile implantation is a reasonable long-term solution in a patient refractory to less invasive options. In patients with fibrotic corpora, a malleable device should be considered (at least temporarily if unable to dilate comfortably to 13 mm.

Short- and Long-Term Musical Preferences: What Makes a Favourite Piece of Music?

Science.gov (United States)

Lamont, Alexandra; Webb, Rebecca

2010-01-01

Within the growing field of music preferences, little is currently known about the concept of a favourite piece of music. The current study explores listeners' nominated favourite pieces of music over short and longer time-spans, combining diary and interview methods to uncover what a favourite means, how stable it is, and what factors influence…

Development of debris-resistant bottom end piece

International Nuclear Information System (INIS)

Sohn, Dong Seong; Lee, Jae Kyung; Hwang, Dae Hyun; Yim, Jung Sik; Song, Kee Nam; Oh, Dong Seok; Im, Hyun Tae

1993-01-01

Debris-related fuel failures has been identified to be one of the major causes of fuel failures recently occured in nuclear power plants. In order to reduce the possibility of debris-related fuel failures, it is necessary to prevent the debris from reaching to fuel rods. In this regard, it is important to develop Debris-Resistant Bottom End Piece. (Author)

The Higgs Particle: A Useful Analogy for Physics Classrooms

Science.gov (United States)

Cid, Xabier; Cid, Ramon

2010-01-01

In November 2009, the largest experiment in history was restarted. Its prime target is the Higgs particle--the last remaining undiscovered piece of our current theory of matter. We present a very simple way to introduce this topic to senior secondary school students, using a comparison with the refractive index of light.

Manufacturing and thermomechanical testing of actively cooled all beryllium high heat flux test pieces

International Nuclear Information System (INIS)

Vasiliev, N.N.; Sokolov, Yu.A.; Shatalov, G.E.

1995-01-01

One of the problems affiliated to ITER high heat flux elements development is a problem of interface of beryllium protection with heat sink routinely made of copper alloys. To get rid of this problem all beryllium elements could be used as heat receivers in places of enhanced thermal loads. In accordance with this objectives four beryllium test pieces of two types have been manufactured in open-quotes Institute of Berylliumclose quotes for succeeding thermomechanical testing. Two of them were manufactured in accordance with JET team design; they are round open-quotes hypervapotron typeclose quotes test pieces. Another two ones are rectangular test sections with a twisted tape installed inside of the circular channel. Preliminary stress-strain analysis have been performed for both type of the test pieces. Hypervapotrons have been shipped to JET where they were tested on JET test bed. Thermomechanical testing of pieces of the type of open-quotes swirl tape inside of tubeclose quotes have been performed on Kurchatov Institute test bed. Chosen beryllium grade properties, some details of manufacturing, results of preliminary stress-strain analysis and thermomechanical testing of the test pieces open-quotes swirl tape inside of tubeclose quotes type are given in this report

Note onset deviations as musical piece signatures.

Science.gov (United States)

Serrà, Joan; Özaslan, Tan Hakan; Arcos, Josep Lluis

2013-01-01

A competent interpretation of a musical composition presents several non-explicit departures from the written score. Timing variations are perhaps the most important ones: they are fundamental for expressive performance and a key ingredient for conferring a human-like quality to machine-based music renditions. However, the nature of such variations is still an open research question, with diverse theories that indicate a multi-dimensional phenomenon. In the present study, we consider event-shift timing variations and show that sequences of note onset deviations are robust and reliable predictors of the musical piece being played, irrespective of the performer. In fact, our results suggest that only a few consecutive onset deviations are already enough to identify a musical composition with statistically significant accuracy. We consider a mid-size collection of commercial recordings of classical guitar pieces and follow a quantitative approach based on the combination of standard statistical tools and machine learning techniques with the semi-automatic estimation of onset deviations. Besides the reported results, we believe that the considered materials and the methodology followed widen the testing ground for studying musical timing and could open new perspectives in related research fields.

Note onset deviations as musical piece signatures.

Directory of Open Access Journals (Sweden)

Joan Serrà

Full Text Available A competent interpretation of a musical composition presents several non-explicit departures from the written score. Timing variations are perhaps the most important ones: they are fundamental for expressive performance and a key ingredient for conferring a human-like quality to machine-based music renditions. However, the nature of such variations is still an open research question, with diverse theories that indicate a multi-dimensional phenomenon. In the present study, we consider event-shift timing variations and show that sequences of note onset deviations are robust and reliable predictors of the musical piece being played, irrespective of the performer. In fact, our results suggest that only a few consecutive onset deviations are already enough to identify a musical composition with statistically significant accuracy. We consider a mid-size collection of commercial recordings of classical guitar pieces and follow a quantitative approach based on the combination of standard statistical tools and machine learning techniques with the semi-automatic estimation of onset deviations. Besides the reported results, we believe that the considered materials and the methodology followed widen the testing ground for studying musical timing and could open new perspectives in related research fields.

Animal and plant remains in a tomb in test-pit 1/05, outside the fortified imperial palace Felix Romuliana

Directory of Open Access Journals (Sweden)

Dimitrijević Vesna

2007-01-01

Full Text Available During the excavations of a tomb located outside the defence walls of the imperial palace, Felix Romuliana, animal and plant remains were collected the analysis of which is the subject of the present study. The faunal remains include the bones and teeth of domestic animals - mule (Equus caballus x Equus asinus, domestic ox (Bos taurus, sheep (Ovis aries, sheep or goat (Ovis/Capra, pig (Sus domesticus and dog (Canis familiaris, a few remains of wild animals - red deer (Cervus elaphus and fox (Vulpes vulpes, and bone of a bird. Until now, no remains of mule have been discovered on sites originating from the classical period at the territory of Serbia. As for plant remains, pieces of carbonized oak wood (Quercus and maple wood (Acer were found, as well as a carbonized seed of a cultivated grapevine (Vitis vinifera vinifera and a tiny fruit of goosegrass (Galium aparine.

Largest College Endowments, 2011

Science.gov (United States)

Chronicle of Higher Education, 2012

2012-01-01

Of all endowments valued at more than $250-million, the UCLA Foundation had the highest rate of growth over the previous year, at 49 percent. This article presents a table of the largest college endowments in 2011. The table covers the "rank," "institution," "market value as of June 30, 2011," and "1-year change" of institutions participating in…

Parameter study of temperature distribution in a work-piece during dry hyperbaric GTA-welding

International Nuclear Information System (INIS)

Fulfs, H.

1989-01-01

In a sensitivity study the influence of initial and boundary welding parameters upon the spatial and temporal temperature distribution in a work-piece during dry hyperbaric GTA-welding is investigated. It will be shown that at constant arc current a variation of pressure (1-60 bar), arc length (3-10 mm), welding speed (1-2.5 mm/s) or the initial temperature (20-200deg C) of the work-piece to some extend significantly influences the size of melt and heat affected zone as well as the maximum temperature and cooling behaviour of the work-piece; compared to this no mentionable effects of shielding gas temperature (20-300deg C) or flow rate (10-500 dm N 3 /min) on the thermal condition of the work-piece can be recognized. The discovered relationships have been approximated by simple correlations, which can be used for parameter optimization and process control. (orig.) With 33 figs., 4 tabs [de

One-Piece Faraday Generator: A Paradoxical Experiment from 1851

Science.gov (United States)

Crooks, M. J.; And Others

1978-01-01

Describes an experiment based on Faraday's one-piece generator, where the rotating disk is replaced by a cylindrical permanent magnet. Explains the apparent paradox that an observer in an inertial frame could measure his absolute velocity. (GA)

Swiveling Lathe Jaw Concept for Holding Irregular Pieces

Science.gov (United States)

David, J.

1966-01-01

Clamp holds irregularly shaped pieces in lathe chuck without damage and eliminates excessive time in selecting optimum mounting. Interchangeable jaws ride in standard jaw slots but swivel so that the jaw face bears evenly against the workpiece regardless of contour. The jaws can be used on both engine and turret lathes.

Different Digitalization Techniques for 3D Printing of Anatomical Pieces.

Science.gov (United States)

Ugidos Lozano, M T; Blaya Haro, F; Ruggiero, Alessandro; Manzoor, S; Nuere Menendez-Pidal, S; Juanes Méndez, J A

2018-01-25

The use of different technological devices that allow the creation of three-dimensional models is in constant evolution, allowing a greater application of these technologies in different fields of health sciences and medical training. The equipment for digitalization is becoming increasingly sophisticated allowing obtaining three-dimensional which are more defined and similar to real image and original object. In this work, different modalities of designing 3D anatomical models of bone pieces are presented, for use by students of different disciplines in Health Sciences. To do this we digitalized bone pieces, with different models of scanners, producing images that can be transformed for 3D printing, with a Colido X 3045 printer by digital treatment with different software.

Device for inspecting pieces of luggage by means of X-rays

International Nuclear Information System (INIS)

Kunze, C.; Dennhoven, M.

1977-01-01

Luggage inspection facility using X-rays, the piece of luggage appearing as a shadow image on a luminous screen. The shielded casing contains a control compartment holding the piece of luggage. During radioscopy the control compartment is closed by means of a shielding tunnel. As during mechanism for the shielding tunnel there is used a so-called linear motor with a moving magnetic field, operating a bar connected with the shielding tunnel through a flexible coupling. The motor is turned off in its terminal positions by means of a magnet and protective gas contacts. (HP) 891 HP [de

One piece reactor removal

International Nuclear Information System (INIS)

Chia, Wei-Min; Wang, Song-Feng

1993-01-01

The strategy of Taiwan Research Reactor Renewal plan is to remove the old reactor block with One Piece Reactor Removal (OPRR) method for installing a new research reactor in original building. In this paper, the engineering design of each transportation works including the work method, the major equipments, the design policy and design criteria is described and discussed. In addition, to ensure the reactor block is safety transported for storage and to guarantee the integrity of reactor base mat is maintained for new reactor, operation safety is drawn special attention, particularly under seismic condition, to warrant safe operation of OPRR. ALARA principle and Below Regulatory Concern (BRC) practice were also incorporated in the planning to minimize the collective dose and the total amount of radioactive wastes. All these activities are introduced in this paper. (J.P.N.)

Largest particle detector nearing completion

CERN Multimedia

2006-01-01

"Construction of another part of the Large Hadron Collider (LHC), the worl's largest particle accelerator at CERN in Switzerland, is nearing completion. The Compact Muon Solenoid (CMS) is oner of the LHC project's four large particle detectors. (1/2 page)

Performance-Based Design Optimization of a Transition Piece for Bucket Foundations for Offshore Wind Turbines

DEFF Research Database (Denmark)

Nezhentseva, Anastasia; Andersen, Lars; Ibsen, Lars Bo

2011-01-01

This paper deals with optimization of the shape of the transition piece connecting turbine column with a suction bucket used as a monopod foundation for an offshore wind turbine. The structural behaviour of a transition piece made of compact reinforced composite (CRC) is analysed. Several...

A study for the improvement of top end piece structure strength

International Nuclear Information System (INIS)

Song, Kee Nam; Sohn, Dong Seong

1989-01-01

As a part of the top end piece(TEP) for the 14 X 14 reload fuel, various models of top end piece structure were analysed, using the ANSYS code, under fuel assembly shipping and handling load conditions. The 3-dimensional isoparametric elements were used in each model. By rearrangement of slots and holes on the adapter plate, without violating the design requirements, and also by changing the enclosure attachment method used on the adapter plate from pin joints to through-weld, the load carrying capacity of the adapter plate was greatly strengthened. These concepts were adopted for the design of the 14 X 14 reload fuel. (Author)

Nzikitanza – A piece on the resistance against the MUOS in Niscemi , Sicily

Directory of Open Access Journals (Sweden)

Marcello Messina

2015-12-01

Full Text Available Nzikitanza for accordion, violin, cello and tape was written in 2012 as a reflection on the deployment of Sicilian territory for NATO and US military operations. In particular, the piece was inspired by the then newly formed resistance committee against the MUOS in Niscemi. This brief commentary will illustrate a priori and a posteriori reflections on the status of the piece as a contribution to forms of antagonistic culture.

Inspection of complex geometry pieces with an intelligent contact transducer

International Nuclear Information System (INIS)

Chatillon, S.; Roy, O.; Mahaut, St.

2000-01-01

A new multi-element contact transducer has been developed to improve the inspection of components with complex geometry. The emitting surface is flexible in order to optimize the contact with pieces. An algorithm, based on a simplified geometric model, has been used to determine the delays law which allows to control the focal characteristics of the transmitted field. Acquisition data lead in transmission with an articulated transducer validate the behavior provided by simulation. Thus the optimization of the delays law ensures the transmission of a beam which is homogeneous and controlled during the moving of the transducer. Inspections in echo-pulse mode are implemented on a sample simulating a component controlled on site. Results show that the dynamical adaptation of the delays law to the geometry of the piece leads to very good performances

Classification of delocalization power of global unitary operations in terms of LOCC one-piece relocalization

Directory of Open Access Journals (Sweden)

Akihito Soeda

2010-06-01

Full Text Available We study how two pieces of localized quantum information can be delocalized across a composite Hilbert space when a global unitary operation is applied. We classify the delocalization power of global unitary operations on quantum information by investigating the possibility of relocalizing one piece of the quantum information without using any global quantum resource. We show that one-piece relocalization is possible if and only if the global unitary operation is local unitary equivalent of a controlled-unitary operation. The delocalization power turns out to reveal different aspect of the non-local properties of global unitary operations characterized by their entangling power.

Accuracy of Setting Work-pieces on Automatic Lines with Pallet-fixtures

Directory of Open Access Journals (Sweden)

L. A. Kolesnikov

2015-01-01

Full Text Available The accuracy of positioning surfaces to be processed on automatic lines with pallet-fixtures essentially depends on the setting error of the pallet-fixtures with work-pieces in ready-to-work position.The applied methods for calculating the setting error do not give a complete picture of the possible coordinates of the point when in the pallet is displaced in different directions.The aim of the work was to determine an accuracy of the setting work-pieces on automatic lines with pallets-fixtures, using a computational and analytical method, to improve a manufacturing precision of parts.The currently used methods to calculate the setting error do not give a complete picture of the possible coordinates of the point of the pallet displacement in different directions. The paper offers a method of equivalent mechanism to determine all the variety of options for displacements in the horizontal plane with a diverse combination of angular and plane-parallel displacements.Using a four-bar linkage, as an equivalent mechanism, allows us to define a zone of the possible positions of any point of the work-piece pallet platform, as the zone bounded by the coupler curve. In case the gaps in the nodes of the two fixtures are equal the zone of possible positions of the point in the parallel displacement of the platform is determined by the circumference and at an angular displacement by the ellipse.The obtained analytical dependences allow us to determine the error at the stage of design with the certain gaps in the fixture nodes.The above method of calculation makes it possible to define a zone of the appropriate placement of the work-piece on its platform for the specified parameters of the pallet to meet conditions for ensuring the coordinate accuracy of the processed axes of holes.

What if the hand piece spring disassembles during robotic radical prostatectomy?

Science.gov (United States)

Akbulut, Ziya; Canda, Abdullah Erdem; Atmaca, Ali Fuat; Asil, Erem; Isgoren, Egemen; Balbay, Mevlana Derya

2011-01-01

Robot-assisted laparoscopic radical prostatectomy (RALRP) is successfully being performed for treating prostate cancer (PCa). However, instrumentation failure associated with robotic procedures represents a unique new problem. We report the successful completion of RALRP in spite of a disassembled hand piece spring during the procedure. A PubMed/Medline search was made concerning robotic malfunction and robot-assisted laparoscopic radical prostatectomy to discuss our experience. We performed RALRP in a 60-year-old male patient with localized PCa. During the procedure, the spring of the hand piece disassembled, and we were not able to reassemble it. We completed the procedure successfully however without fixing the disassembled hand piece spring. We were able to grasp tissue and needles when we brought our fingers together. The only movement we needed to do was to move fingers apart to release tissue or needles caught by robotic instrument. Although malfunction risk related to the da Vinci Surgical System seems to be very low, it might still occur. Sometimes, simple maneuvers may compensate for the failed function as occurred in our case. However, patients should be informed before the operation about the possibility of converting their procedure to laparoscopic or open due to robotic malfunction.

Ultrasonic non-destructive testing of pieces of complex geometry with a flexible phased array transducer

Science.gov (United States)

Chatillon; Cattiaux; Serre; Roy

2000-03-01

Ultrasonic non-destructive testing of components of complex geometry in the nuclear industry faces several difficulties: sensitivity variations due to unmatched contact, inaccurate localization of defects due to variations of transducer orientation, and uncovered area of the component. To improve the performances of such testing and defect characterization, we propose a new concept of ultrasonic contact phased array transducer. The phased array transducer has a flexible radiating surface able to fit the actual surface of the piece to optimize the contact and thus the sensitivity of the test. To control the transmitted field, and therefore to improve the defect characterization, a delay law optimizing algorithm is developed. To assess the capability of such a transducer, the Champ-Sons model, developed at the French Atomic Energy Commission for predicting field radiated by arbitrary transducers into pieces, has to be extended to sources directly in contact with pieces of complex geometry. The good behavior of this new type of probe predicted by computations is experimentally validated with a jointed transducer positioned on pieces of various profiles.

Final report on the UKAEA defect detection trials on test pieces 3 and 4. December 1982

International Nuclear Information System (INIS)

Lock, D.L.; Cowburn, K.J.

1983-03-01

The report follows ND-R-845(R) which described the scope, inspection procedures and results of the defect detection trials on test pieces 3 and 4. The work has been aimed at assessing the ability of non-destructive testing techniques, to detect and size defects near the clad/base metal interface of a flat piece and the inner radius of a PWR inlet nozzle. Following the destructive examination of the test pieces at Ispra, the true sizes of the intended defects are now known. These sizes are compared with that intended and the performance of the inspection teams reviewed. (author)

78 FR 19303 - Notice of Inventory Completion for Native American Human Remains and Associated Funerary Objects...

Science.gov (United States)

2013-03-29

... are 22 shell beads, 24 pieces of a single Baytown Plain ceramic jar, and 13 ceramic sherds. The Boyd site is located in Madison County, MS, and consists of a village area and six mounds. On the basis of... faunal elements, 2 flakes, 1 piece of shatter, 4 points, 1 flake tool, 1 piece of charcoal, 1 discoidal...

Modeling The Interaction Effects Between Tools And The Work Piece For Metal Forming Processes

International Nuclear Information System (INIS)

Franzke, Martin; Puchhala, Sreedhar; Dackweiler, Harald

2007-01-01

In metal forming processes especially in cold forming, elastic deformation of the tools has a big impact on the final shape of the work-piece. Computation of such processes considering the plastic effects of the work-piece and elastic deformations of the tools at a time in a single FE model complicates to manage the convergence criteria. This situation is even aggravated if the contact situations (between working and support rolls) have to be considered in the simulation, which requires a very fine discretization of the contact zones of both the tool and work piece. This paper presents recently developed concept which meets the above mentioned demands very effectively. Within this concept, the computation of the elastic effects of the tools is separated from the process simulation (which considers elastic-plastic effects of the work-piece). Both simulations are coupled via automatic data interchange, which is bi-directional, because both simulations influence each other. The advantages of this concept include a quite easy to handle contact situations in process simulation, smaller stiffness matrix compared to single model approach and good convergence of the computation. This concept is highly generalized and successfully applied to simulate rolling, drawing, extrusion and forging processes. The above mentioned concept is being implemented into the FE package PEP and LARSTRAN/SHAPE. Rolling experiments are conducted in duo and quarto configuration. Optical three-dimensional digitalizing system was used to measure the deformations within the machine and work-piece profile. These results are used for the validation of FE simulations. This work is being sponsored by the German Research Foundation (DFG) through the project ''Interaction effects between processes and structures-SPP1180''

Two-piece hollow bulb obturator

Directory of Open Access Journals (Sweden)

Subramaniam Elangovan

2011-01-01

Full Text Available There are various types of obturator fabrication achievable by prosthodontist. Maxillectomy, which is a term used by head and neck surgeons and prosthodontists to describe the partial or total removal of the maxilla in patients suffering from benign or malignant neoplasms is a defect for which to provide an effective obturator is a difficult task for the maxillofacial prosthodontist. Multidisciplinary treatment planning is essential to achieve adequate retention and function for the prosthesis. Speech is often unintelligible as a result of the marked defects in articulation and nasal resonance. This paper describes how to achieve the goal for esthetics and phonetics and also describes the fabrication of a hollow obturator by two piece method, which is simple and maybe used as definitive obturator for maximum comfort of the patient.

Orbital Wall Reconstruction with Two-Piece Puzzle 3D Printed Implants: Technical Note

Science.gov (United States)

Mommaerts, Maurice Y.; Büttner, Michael; Vercruysse, Herman; Wauters, Lauri; Beerens, Maikel

2015-01-01

The purpose of this article is to describe a technique for secondary reconstruction of traumatic orbital wall defects using titanium implants that act as three-dimensional (3D) puzzle pieces. We present three cases of large defect reconstruction using implants produced by Xilloc Medical B.V. (Maastricht, the Netherlands) with a 3D printer manufactured by LayerWise (3D Systems; Heverlee, Belgium), and designed using the biomedical engineering software programs ProPlan and 3-Matic (Materialise, Heverlee, Belgium). The smaller size of the implants allowed sequential implantation for the reconstruction of extensive two-wall defects via a limited transconjunctival incision. The precise fit of the implants with regard to the surrounding ledges and each other was confirmed by intraoperative 3D imaging (Mobile C-arm Systems B.V. Pulsera, Philips Medical Systems, Eindhoven, the Netherlands). The patients showed near-complete restoration of orbital volume and ocular motility. However, challenges remain, including traumatic fat atrophy and fibrosis. PMID:26889349

Composing Interactive Dance Pieces for the MotionComposer, a device for Persons with Disabilities

OpenAIRE

Bergsland, Andreas; Wechsler, Robert

2015-01-01

The authors have developed a new hardware/software device for persons with disabilities (the MotionComposer), and in the process created a number of interactive dance pieces for non- disabled professional dancers. The paper briefly describes the hardware and motion tracking software of the device before going into more detail concerning the mapping strategies and sound design applied to three interactive dance pieces. The paper concludes by discussing a particular philosophy championing trans...

The Key Pieces of the Career Survival and Success Puzzle.

Science.gov (United States)

Simonetti, Jack L.

1999-01-01

Analysis of career-success factors identified by 5,000 managers yielded 10 key pieces: excellent performance record, communication skills, interpersonal skills, personality, skill currency, significant work experiences, power, ability to withstand pressure, ability to make difficult decisions, and having a mentor. (SK)

A Novel Computer-Aided Design/Computer-Assisted Manufacture Method for One-Piece Removable Partial Denture and Evaluation of Fit.

Science.gov (United States)

Ye, Hongqiang; Li, Xinxin; Wang, Guanbo; Kang, Jing; Liu, Yushu; Sun, Yuchun; Zhou, Yongsheng

2018-02-15

To investigate a computer-aided design/computer-aided manufacturing (CAD/CAM) process for producing one-piece removable partial dentures (RPDs) and to evaluate their fits in vitro. A total of 15 one-piece RPDs were designed using dental CAD and reverse engineering software and then fabricated with polyetheretherketone (PEEK) using CAM. The gaps between RPDs and casts were measured and compared with traditional cast framework RPDs. Gaps were lower for one-piece PEEK RPDs compared to traditional RPDs. One-piece RPDs can be manufactured by CAD/CAM, and their fits were better than those of traditional RPDs.

FEA and microstructure characterization of a one-piece Y-TZP abutment.

Science.gov (United States)

da Silva, Lucas Hian; Ribeiro, Sebastião; Borges, Alexandre Luís Souto; Cesar, Paulo Francisco; Tango, Rubens Nisie

2014-11-01

The most important drawback of dental implant/abutment assemblies is the need for a fixing screw. This study aimed to develop an esthetic one-piece Y-TZP abutment to suppress the use of the screw. Material characterization was performed using a bar-shaped specimen obtained by slip-casting to validate the method prior to prototype abutment fabrication by the same process. The mechanical behavior of the prototype abutment was verified and compared with a conventional abutment by finite element analysis (FEA). The abutment was evaluated by micro-CT analysis and its density was measured. FEA showed stress concentration at the first thread pitch during installation and in the cervical region during oblique loading for both abutments. However, stress concentration was observed at the base of the screw head and stem in the conventional abutment. The relative density for the fabricated abutment was 95.68%. Micro-CT analysis revealed the presence of elongated cracks with sharp edges over the surface and porosity in the central region. In the light of these findings, the behavior of a one-piece abutment is expected to be better than that of the conventional model. New studies should be conducted to clarify the performance and longevity of this one-piece Y-TZP abutment. Copyright © 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in

Science.gov (United States)

North Carolina America's Largest Home Runs on Biodiesel in North Carolina to someone by E-mail Share Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in North Carolina on Facebook Tweet about Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in North

Application of gamma radiation to the nodes detection in Pinus Radiata (D.Don) wood pieces

International Nuclear Information System (INIS)

Morales, J.R.; Dinator, Maria I; Karsulovic C, Jose T.; Leon G, Adolfo

1996-01-01

Attenuation of 59.5 KeV photons provided by an Am-241 source, has been used to detect knots in lumber pieces from Pinus Radiata (D.Don). It is shown that the linear attenuation coefficient is a sensitive parameter to detect singularities in the structure of this material. The scanning of the piece provides profiles which define the position and extension of the singularity. (author)

Identifying the node spreading influence with largest k-core values

International Nuclear Information System (INIS)

Lin, Jian-Hong; Guo, Qiang; Dong, Wen-Zhao; Tang, Li-Ying; Liu, Jian-Guo

2014-01-01

Identifying the nodes with largest spreading influence of complex networks is one of the most promising domains. By taking into account the neighbors' k-core values, we present an improved neighbors' k-core (INK) method which is the sum of the neighbors' k-core values with a tunable parameter α to evaluate the node spreading influence with largest k-core values. Comparing with the Susceptible–Infected–Recovered (SIR) results for four real networks, the INK method could identify the node spreading influence with largest k-core values more accurately than the ones generated by the degree k, closeness C, betweenness B and coreness centrality method. - Highlights: • We present an improved neighbors' k-core (INK) method to evaluate the node spreading influence with largest k-core values. • The INK method could identify the node spreading influence with largest k-core values more accurately. • Kendall's tau τ of INK method with α=1 are highly identical to rank the node influence

CERN tests largest superconducting solenoid magnet

CERN Multimedia

2006-01-01

"CERN's Compacts Muon Solenoid (CMS) - the world's largest superconducting solenoid magnet - has reached full field in testing. The instrument is part of the proton-proton Large Hadron Collider (LHC) project, located in a giant subterranean chamber at Cessy on the Franco-Swiss border." (1 page)

Effect of Colgate Sensitive Pro-Relief paste on the strength of adhesion of composite resin in dental pieces

International Nuclear Information System (INIS)

Davila Rodriguez, Amanda; Sas Rosero, Cristina de

2013-01-01

The effect of the toothpaste Colgate Sensitive Pro-Relief on the strength of adhesion was analyzed, through in vitro studies, in dental pieces that have been previously treated with a protocol that simulates dental hypersensitivity. Several dental pieces were taken as study samples and divided into groups. The Colgate Sensitive Pro-Relief TM desensitizing paste was applied to the non-crown surfaces of the teeth, with the exception of the negative control group which remained without the application. Positive control protocols, prophylaxis with the use of fluorinated prophylactic paste, 400 grit sandpaper, phosphoric acid and negative control were applied. Subsequently, a Brilliant NG TM dentin photocurable resin crown was constructed for the groups to which the indicated protocols were applied. The greatest strength of adhesion was presented by the group Prophylaxis. It is assumed that a second application of orthophosphoric acid is able to de-blot even more the dental tubules and with this improve the adhesion. An improvement in the adhesion of resin on the tooth surface is provided when performing a dental prophylaxis using prophylactic paste and a rubber cup, before restoring a tooth. Sandpaper 400 prevents an improvement in the adhesion of resins. The results with the negative control group were unexpected and may be due to errors in the treatment process [es

Development of debris resistant bottom end piece

International Nuclear Information System (INIS)

Lee, Jae Kyung; Sohn, Dong Seong; Yim, Jeong Sik; Hwang, Dae Hyun; Song, Kee Nam; Oh, Dong Seok; Rhu, Ho Sik; Lee, Chang Woo; Kim, Seong Soo; Oh, Jong Myung

1993-12-01

Debris-related fuel failures have been identified as one of the major causes of fuel failures. In order to reduce the possibility of debris-related fuel failures, it is necessary to develop Debris-Resistant Bottom End Piece. For this development, mechanical strength test and pressure drop test were performed, and the test results were analyzed. And the laser cutting, laser welding and electron beam welding technology, which were the core manufacturing technology of DRBEP, were developed. Final design were performed, and the final drawing and specifications were prepared. The prototype of DRBEP was manufactured according to the developed munufacturing procedure. (Author)

Bite Reconstruction in the Aesthetic Zone Using One-Piece Bicortical Screw Implants

Directory of Open Access Journals (Sweden)

Stefan Ihde

2018-01-01

Full Text Available The aim of this article was to present the clinical application of a new, smooth surfaced one-piece bicortical screw implant with immediate loading protocol. An 18-year-old, healthy male patient with a history of total dislocation and replantation of teeth 11 and 21 in early childhood was admitted to the clinic. Teeth 11 and 21 were extracted, and two long one-piece implants were inserted at extraction sockets in one surgical session under local anesthesia. Temporary composite crowns were placed in the patient on the same day. After 3 months, the single-phase two-layer impression was made and the composite crowns were replaced with metal-ceramic crowns. After 12 months, satisfactory aesthetic and functional results were obtained.

Analysis of Human Standing Balance by Largest Lyapunov Exponent

Directory of Open Access Journals (Sweden)

Kun Liu

2015-01-01

Full Text Available The purpose of this research is to analyse the relationship between nonlinear dynamic character and individuals’ standing balance by the largest Lyapunov exponent, which is regarded as a metric for assessing standing balance. According to previous study, the largest Lyapunov exponent from centre of pressure time series could not well quantify the human balance ability. In this research, two improvements were made. Firstly, an external stimulus was applied to feet in the form of continuous horizontal sinusoidal motion by a moving platform. Secondly, a multiaccelerometer subsystem was adopted. Twenty healthy volunteers participated in this experiment. A new metric, coordinated largest Lyapunov exponent was proposed, which reflected the relationship of body segments by integrating multidimensional largest Lyapunov exponent values. By using this metric in actual standing performance under sinusoidal stimulus, an obvious relationship between the new metric and the actual balance ability was found in the majority of the subjects. These results show that the sinusoidal stimulus can make human balance characteristics more obvious, which is beneficial to assess balance, and balance is determined by the ability of coordinating all body segments.

Sutureless, Glueless, Scleral Fixation of Single-Piece and Toric Intraocular Lens: A Novel Technique

Directory of Open Access Journals (Sweden)

Aditya Kelkar

2015-07-01

Full Text Available Sutureless, glueless, scleral fixation of an intraocular lens is a known technique of fixing a lens in the scleral pockets. However, this technique is applied to single-piece and toric lenses instead of 3-piece lenses, allowing the advantage of the use of premium lenses in patients with poor capsular support. Favourable results without complications of pigment dispersion, iris transillumination defects, dysphotopsia, elevated intraocular pressure, intraocular hemorrhage and cystoid macular edema with a well-centered, stable intraocular lens have been observed in the 3-month postoperative period in both cases.

North Andean origin and diversification of the largest ithomiine butterfly genus

Science.gov (United States)

Lisa De-Silva, Donna; Mota, Luísa L.; Chazot, Nicolas; Mallarino, Ricardo; Silva-Brandão, Karina L.; Piñerez, Luz Miryam Gómez; Freitas, André V.L.; Lamas, Gerardo; Joron, Mathieu; Mallet, James; Giraldo, Carlos E.; Uribe, Sandra; Särkinen, Tiina; Knapp, Sandra; Jiggins, Chris D.; Willmott, Keith R.; Elias, Marianne

2017-01-01

The Neotropics harbour the most diverse flora and fauna on Earth. The Andes are a major centre of diversification and source of diversity for adjacent areas in plants and vertebrates, but studies on insects remain scarce, even though they constitute the largest fraction of terrestrial biodiversity. Here, we combine molecular and morphological characters to generate a dated phylogeny of the butterfly genus Pteronymia (Nymphalidae: Danainae), which we use to infer spatial, elevational and temporal diversification patterns. We first propose six taxonomic changes that raise the generic species total to 53, making Pteronymia the most diverse genus of the tribe Ithomiini. Our biogeographic reconstruction shows that Pteronymia originated in the Northern Andes, where it diversified extensively. Some lineages colonized lowlands and adjacent montane areas, but diversification in those areas remained scarce. The recent colonization of lowland areas was reflected by an increase in the rate of evolution of species’ elevational ranges towards present. By contrast, speciation rate decelerated with time, with no extinction. The geological history of the Andes and adjacent regions have likely contributed to Pteronymia diversification by providing compartmentalized habitats and an array of biotic and abiotic conditions, and by limiting dispersal between some areas while promoting interchange across others. PMID:28387233

Computer Tool for Automatically Generated 3D Illustration in Real Time from Archaeological Scanned Pieces

OpenAIRE

Luis López; Germán Arroyo; Domingo Martín

2012-01-01

The graphical documentation process of archaeological pieces requires the active involvement of a professional artist to recreate beautiful illustrations using a wide variety of expressive techniques. Frequently, the artist’s work is limited by the inconvenience of working only with the photographs of the pieces he is going to illustrate. This paper presents a software tool that allows the easy generation of illustrations in real time from 3D scanned models. The developed interface allows the...

Well-Defined Cyclic Triblock Terpolymers: A Missing Piece of the Morphology Puzzle

KAUST Repository

Polymeropoulos, George; Bilalis, Panayiotis; Hadjichristidis, Nikolaos

2016-01-01

Two well-defined cyclic triblock terpolymers, missing pieces of the terpolymer morphology puzzle, consisting of poly(isoprene), polystyrene, and poly(2-vinylpyridine), were synthesized by combining the Glaser coupling reaction with anionic

Material Composition of Bucket Foundation Transition Piece for Offshore Wind Turbines

DEFF Research Database (Denmark)

Nezhentseva, Anastasia; Andersen, Lars; Ibsen, Lars Bo

2010-01-01

In Denmark, production of renewable energy is focused on offshore wind turbines, since they make little if any inconvenience for residents in inhabited areas. High requirements are placed on the installation of the foundations which can cost about 30% of the total cost of the wind turbine....... This paper deals with the transition piece for a relatively novel type of foundation, the so-called suction bucket (caisson), focusing on the design of a transition piece connecting the turbine column with a suction bucket used as a monopod foundation for an offshore wind turbine. Since the current design...... practice is limited to the use of steel-flange-reinforced shear panels for the transition piece—a production that requires extensive welding work—a desirable solution is to find a material that provides lower cost and easier manufacturing without compromising the strength and stiffness. The paper compares...

The Hiroshima neutron dosimetry enigma: Missing puzzle piece No. 6

International Nuclear Information System (INIS)

Gold, Raymond

1999-01-01

More than a decade has elapsed since the serious nature of the discrepancy between neutron dosimetry experiments (E) and neutron transport calculations (C) for the Hiroshima site was identified. Since that time extensive efforts to resolve this Hiroshima neutron dosimetry enigma have not only failed, but now demonstrate that the magnitude of this discrepancy is much greater than initially estimated. The currently evaluated E/C ratio for thermal neutron fluence at the Hiroshima site increases rapidly with increasing slant range from the epicenter. In the slant range region beyond 1000 m, E/C exceeds unity by one to two orders of magnitude depending on the specific dosimetry data that are utilized. Principal features that characterize the Hiroshima neutron dosimetry enigma are summarized. Puzzle Piece No. 6: In-situ production and Prompt fallout of radionuclides from Little Boy is advanced as a possible contributory phenomenon to this enigma. (The atom bomb detonated over Hiroshima was called Little Boy.) Measurements of 60 Co and 152 Eu specific activity at the Hiroshima site are used to obtain order of magnitude numerical estimates that show this conjecture is plausible. Comparison of different 60 Co measurements at the Hiroshima site reveals that the variation of E/C with slant range depends on the method used to quantify 60 Co specific activity as well as the type of dosimetry samples that are employed. These 60 Co comparisons lend additional qualitative credence to this conjecture. Within the limits of presently available data, these assessments show that Puzzle Piece No. 6 qualitatively satisfies the principal features that characterize the Hiroshima neutron dosimetry enigma. Nevertheless, current lack of data prevent this conjecture from being conclusively confirmed or refuted. Consequently, specific recommendations are advanced to resolve the Hiroshima neutron dosimetry enigma with emphasis on experimental tests that can quantitatively evaluate Puzzle Piece

Comparison of the T-piece resuscitator with other neonatal manual ventilation devices: A qualitative review.

LENUS (Irish Health Repository)

2012-01-31

AIM: To review the literature surrounding various aspects of T-piece resuscitator use, with particular emphasis on the evidence comparing the device to other manual ventilation devices in neonatal resuscitation. DATA SOURCES: The Medline, EMBASE, Cochrane databases were searched in April 2011. Ongoing trials were identified using www.clinicaltrials.gov and www.controlled-trials.com. Additional studies from reference lists of eligible articles were considered. All studies including T-piece resuscitator use were eligible for inclusion. RESULTS: Thirty studies were included. There were two randomised controlled trials in newborn infants comparing the devices, one of which addressed short and intermediate term morbidity and mortality outcomes and found no difference between the T-piece resuscitator and self inflating bag. From manikin studies, advantages to the T-piece resuscitator include the delivery of inflating pressures closer to predetermined target pressures with least variation, the ability to provide prolonged inflation breaths and more consistent tidal volumes. Disadvantages include a technically more difficult setup, more time required to adjust pressures during resuscitation, a larger mask leak and less ability to detect changes in compliance. CONCLUSIONS: There is a need for appropriately designed randomised controlled trials in neonates to highlight the efficacy of one device over another. Until these are performed, healthcare providers should be appropriately trained in the use of the device available in their departments, and be aware of its own limitations.

The DS86 neutron dosimetry enigma: Some missing pieces to the puzzle

International Nuclear Information System (INIS)

Gold, R.

1994-01-01

International programs have been conducted over the last four decades to quantify the exposure of atom bomb survivors from Hiroshima and Nagasaki. Unfortunately, the quest for accurate gamma-ray and neutron exposure doses of atom bomb survivors has proven illusive. Efforts in the most recent of these programs, designated as Dosimetry System 1986 (DS86), have revealed a serious and persistent discrepancy between neutron transport calculations and thermal neutron activation measurements at the Hiroshima site, which will be called the DS86 neutron dosimetry enigma. It is established that this enigma is a complex puzzle that precludes simple solutions. This conclusion is deduced through the identification of a number of missing pieces to the puzzle. Implications and conclusions that can be inferred from these missing puzzle pieces are advanced

Diagnosis of two textile pieces from Santarém Diocesan Museum: a multi-analytical approach

Directory of Open Access Journals (Sweden)

Rita Florentino Correia

2016-01-01

Full Text Available The present work aim was to study two composite textile pieces from Santarém Diocesan Museum, including their historic context, their conservation condition and the characterization of their constituent parts, which established the date of production. Both pieces belonged to the First Bishop of Daman (1840-1900 and were selected for their historic interest and originality, and for representing a case study in terms of materials, techniques and decoration. They are also a good example of the conservation problems that can occur in liturgical textiles. The diagnosis was extended using optical microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray fluorescence and Raman spectroscopy. These techniques allowed the identification of the fibres, binder, metals and pigments, confirming that the pieces date back to the late nineteenth century. Among the main forms of degradation, it was observed: structural deformations, dirt and material losses, not only in areas with fabric but also with metallic embroidery and painted layers.

The Ayre's T-piece turns 80: A 21st century review.

Science.gov (United States)

Oswald, Lauren; Smith, Emma-Jane; Mathew, Malcolm; Goonasekera, Chulananda

2018-06-07

Ayre's T-piece, first introduced 80 years ago, continues to be widely used in pediatric anesthesia despite colossal advances in equipment and technology. We present a review of its history, advantages, and disadvantages, and place in modern-day clinical practice. © 2018 John Wiley & Sons Ltd.

Electrification: Connecting the Pieces in the Broader View

Energy Technology Data Exchange (ETDEWEB)

Gearhart, Chris C [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-11-28

Presented at the SELECT Annual Meeting on September 26, 2017, this PowerPoint presentation gives an overview of connectivity and automation and how these new technologies will impact society in both known and unknown ways. Electrification challenges and opportunities are also outlined as without electrification, connectivity and automation will just magnify the negative health, climate and economic problems of the current transportation systems. Electrification can provide benefits while mitigating the negative consequences. And with careful connection of all of the pieces from materials up through controls, a sustainable transportation eco-system is attainable.

Nilai Pendidikan Dalam Komik One Piece Jilid 1-23 Karya Eiichiro Oda (Sebuah Tinjauan Sosiologi Sastra)

OpenAIRE

Furqon, Muhammad Taufiq

2013-01-01

Furqon, Muhammad Taufiq. 2013. “Nilai Pendidikan dalam Komik One Piece Jilid 1-23 Karya Eiichiro Oda”. Skripsi S-1 Fakultas Ilmu Budaya Universitas Diponegoro Semarang. Permasalahan dalam penelitian ini adalah komik One Piece dilihat dari bentuknya hanya terdiri dari gambar dan teks, tetapi ada unsur-unsur fiksi terdapat di dalamnya seperti adanya tema, tokoh, latar,dan ada amanat yang ingin disampaikan pengarangnya. Sehingga pemahaman dan pemaknaan terhadapnya mampu memberikan manfaat bagi p...

broken magnet highlights largest collider's engineering challenges

CERN Multimedia

Inman, Mason

2007-01-01

"Even at the world's soon-to-be largest particle accelerator - a device that promises to push the boundaries of physics - scientists need to be mindful of one of the most fundamental laws in the universe: Murphy's Law. (2 pages)

Piecing It Together: The Effect of Background Music on Children's Puzzle Assembly.

Science.gov (United States)

Koolidge, Louis; Holmes, Robyn M

2018-04-01

This study explored the effects of background music on cognitive (puzzle assembly) task performance in young children. Participants were 87 primarily European-American children (38 boys, 49 girls; mean age = 4.77 years) enrolled in early childhood classes in the northeastern United States. Children were given one minute to complete a 12-piece puzzle task in one of three background music conditions: music with lyrics, music without lyrics, and no music. The music selection was "You're Welcome" from the Disney movie "Moana." Results revealed that children who heard the music without lyrics completed more puzzle pieces than children in either the music with lyrics or no music condition. Background music without distracting lyrics may be beneficial and superior to background music with lyrics for young children's cognitive performance even when they are engaged independently in a nonverbal task.

[Fracture of implant abutment screws and removal of a remaining screw piece

NARCIS (Netherlands)

Broeke, S.M. van den; Baat, C. de

2008-01-01

Fracture of the implant abutment screws is a complication which can render an implant useless. The prevalence of abutment screw fracture does not exceed 2.5% after 10 years. Causes are loosening of implant abutment screw, too few, too short or too narrow implants, implants not inserted perpendicular

Pigment dispersion and chronic intraocular pressure elevation after sulcus placement of 3-piece acrylic intraocular lens.

Science.gov (United States)

Almond, M Camille; Wu, Michael C; Chen, Philip P

2009-12-01

A 55-year-old man had phacoemulsification and implantation of a 3-piece acrylic intraocular lens (IOL) (AcrySof MA60AC) in the right eye. One month postoperatively, the intraocular pressure (IOP) was 48 mm Hg and peripheral transillumination defects were noted in the iris circumferentially, with the IOL optic edge visible as a silhouette. Gonioscopy showed dense pigmentation of the trabecular meshwork in the right eye, but in the left eye, only mild trabecular meshwork pigment was seen, along with a concave peripheral iris insertion. At 21 months, the right eye required 3 medications for IOP control. While pigment dispersion has been widely reported after placement of 1-piece acrylic IOLs in the ciliary sulcus, we conclude that in susceptible individuals with a concave peripheral iris insertion, pigment dispersion can occur with sulcus placement of a 3-piece acrylic model despite its thinner optic and angulated haptics.

LHC : The World's Largest Vacuum Systems being commissioned at CERN

CERN Document Server

Jiménez, J M

2008-01-01

When it switches on in 2008, the 26.7 km Large Hadron Collider (LHC) at CERN, will have the world's largest vacuum system operating over a wide range of pressures and employing an impressive array of vacuum technologies. This system is composed by 54 km of UHV vacuum for the circulating beams and 50 km of insulation vacuum around the cryogenic magnets and the liquid helium transfer lines. Over the 54 km of UHV beam vacuum, 48 km of this are at cryogenic temperature (1.9 K). The remaining 6 km of beam vacuum containing the insertions for "cleaning" the proton beams, radiofrequency cavities for accelerating the protons as well as beam-monitoring equipment is at ambient temperature and uses non-evaporable getter (NEG) coatings - a vacuum technology that was born and industrialized at CERN. The pumping scheme is completed using 780 ion pumps to remove noble gases and to provide pressure interlocks to the 303 vacuum safety valves. Pressure readings are provided by 170 Bayard-Alpert gauges and 1084 gauges (Pirani a...

Effect of pieces size of Empty Fruit Bunches (EFB) on composting of EFB mixed with activated liquid organic fertilizer

Science.gov (United States)

Trisakti, B.; Mhardela, P.; Husaini, T.; Irvan; Daimon, H.

2018-02-01

This research was to determine the effect of pieces sizes of oil palm empty fruit bunch (EFB) on the composting of EFB mixed with activated liquid organic fertilizer (ALOF) in a basket composter in order to obtain high quality compost. The composting process was started by cutting the EFB into pieces with varies sizes, inserting the EFB pieces into basket composter (33 cm W × 28 cm L × 40 cm H), and adding ALOF until moisture content (MC) in the range of 55-65%. During composting, the compost pile was turned every 3 days and the MC was maintained at 55-65% range by adding the ALOF. The sizes of the EFB pieces were varied into <1, 1-3, 4-7, 8-11, and 12-15 cm. The parameters analysed during the composting were temperature, pH, MC, compost weight, water holding capacity (WHC), CN ratio, and the quality of the final compost. Composting was carried out for 40 days and the best result obtained at EFB pieces size was 1-3 cm with compost characteristic were pH 9.0; MC 52.59%; WHC 76%; CN ratio 12.15; N 1.96%; P 0.58%; and K 0. 95%.

Remaining stress-state and strain-energy in tempered glass fragments

DEFF Research Database (Denmark)

Nielsen, Jens Henrik

2016-01-01

to the fragmentation process and some authors e.g. Barsom (J Am Ceram Soc 51(2):75, 1968), Gulati (Glass processing days, Tamglass Engineering Oy, Tampere, 1997), Warren (Fractography of glasses and ceramics IV, Alfred University, Alfred, 2001) and Tandon and Glass (Fracture mechanics of ceramics—active materials......When tempered glass breaks, it shatters into relatively small pieces depending on the residual stress state in the glass. This has been known for centuries and is currently used in standards for classifying whether a piece of glass is tempered or not. However, the process of fragmentation...... is complex and only a few, relatively simple, models have been suggested for predicting the fragment size. The full theoretical explanation is still to be found and this work aims at providing another brick to the puzzle. The strain-energy present in tempered glass is obviously contributing...

A simple technique of intraocular lenses explantation for single-piece foldable lenses

Directory of Open Access Journals (Sweden)

Arup Bhaumik

2017-01-01

Full Text Available Foldable intraocular lenses (IOLs are most commonly used in modern-day cataract surgery. Explantation of these IOLs is not frequently encountered, but sometimes extreme situations may demand the same. Commonly explantation is achieved by bisecting the IOL inside the anterior chamber with a cutter and delivering the pieces out one by one. This may require corneal wound extension with associated damage and endothelial loss leading to visual deterioration. We devised a simple, innovative IOL explantation technique utilizing a modified Alcon A cartridge and snare. This can successfully refold the IOL to be explanted inside the eye and deliver it out through the same wound. The device has limitations with very thick optic lenses, multipiece, and silicon IOLs. In conclusion, we describe a simple, innovative, and reproducible technique to explant almost any single piece IOL without compromising the original surgery and yielding very satisfactory outcomes.

Joint Asymptotic Distributions of Smallest and Largest Insurance Claims

Directory of Open Access Journals (Sweden)

Hansjörg Albrecher

2014-07-01

Full Text Available Assume that claims in a portfolio of insurance contracts are described by independent and identically distributed random variables with regularly varying tails and occur according to a near mixed Poisson process. We provide a collection of results pertaining to the joint asymptotic Laplace transforms of the normalised sums of the smallest and largest claims, when the length of the considered time interval tends to infinity. The results crucially depend on the value of the tail index of the claim distribution, as well as on the number of largest claims under consideration.

Leaching of metals from large pieces of printed circuit boards using citric acid and hydrogen peroxide.

Science.gov (United States)

Jadhav, Umesh; Su, C; Hocheng, Hong

2016-12-01

In the present study, the leaching of metals from large pieces of computer printed circuit boards (CPCBs) was studied. A combination of citric acid (0.5 M) and 1.76 M hydrogen peroxide (H 2 O 2 ) was used to leach the metals from CPCB piece. The influence of system variables such as H 2 O 2 concentration, concentration of citric acid, shaking speed, and temperature on the metal leaching process was investigated. The complete metal leaching was achieved in 4 h from a 4 × 4 cm CPCB piece. The presence of citric acid and H 2 O 2 together in the leaching solution is essential for complete metal leaching. The optimum addition amount of H 2 O 2 was 5.83 %. The citric acid concentration and shaking speed had an insignificant effect on the leaching of metals. The increase in the temperature above 30 °C showed a drastic effect on metal leaching process.

Learning and Memory Processes Following Cochlear Implantation: The Missing Piece of the Puzzle.

Science.gov (United States)

Pisoni, David B; Kronenberger, William G; Chandramouli, Suyog H; Conway, Christopher M

2016-01-01

At the present time, there is no question that cochlear implants (CIs) work and often work very well in quiet listening conditions for many profoundly deaf children and adults. The speech and language outcomes data published over the last two decades document quite extensively the clinically significant benefits of CIs. Although there now is a large body of evidence supporting the "efficacy" of CIs as a medical intervention for profound hearing loss in both children and adults, there still remain a number of challenging unresolved clinical and theoretical issues that deal with the "effectiveness" of CIs in individual patients that have not yet been successfully resolved. In this paper, we review recent findings on learning and memory, two central topics in the field of cognition that have been seriously neglected in research on CIs. Our research findings on sequence learning, memory and organization processes, and retrieval strategies used in verbal learning and memory of categorized word lists suggests that basic domain-general learning abilities may be the missing piece of the puzzle in terms of understanding the cognitive factors that underlie the enormous individual differences and variability routinely observed in speech and language outcomes following cochlear implantation.

T-piece resuscitators: how do they compare?

Science.gov (United States)

Hinder, Murray; McEwan, Alistair; Drevhammer, Thomas; Donaldson, Snorri; Tracy, Mark Brian

2018-05-04

The T-piece resuscitator (TPR) has seen increased use as a primary resuscitation device with newborns. Traditional TPR design uses a high resistance expiratory valve to produce positive end expiratory pressure (PEEP) or continuous positive airway pressure (CPAP) at resuscitation. A new TPR device that uses a dual flow ratio valve (fluidic flip) to produce PEEP/CPAP is now available (rPAP). We aimed to compare the measured ventilation performance of different TPR devices in a controlled bench test study. Single operator provided positive pressure ventilation to an incremental testlung compliance (Crs) model (0.5-5 mL/cmH 2 O) with five different brands of TPR device (Atom, Neopuff, rPAP, GE Panda warmer and Draeger Resuscitaire). At recommended peak inflation pressure (PIP) 20 cmH 2 O, PEEP of 5 cmH 2 O and rate of 60 inflations per minute. 1864 inflations were analysed. Four of the five devices tested demonstrated inadvertent elevations in mean PEEP (5.5-10.3 cmH 2 O, p<0.001) from set value as Crs was increased, while one device (rPAP) remained at the set value. Measured PIP exceeded the set value in two infant warmer devices (GE and Draeger) with inbuilt TPR at Crs of 0.5 (24.5 and 23.5 cmH 2 O, p<0.001). Significant differences were seen in tidal volumes across devices particularly at higher Crs (p<0.001). Results show important variation in delivered ventilation from set values due to inherent TPR device design characteristics with a range of lung compliances expected at birth. Device-generated inadvertent PEEP and overdelivery of PIP may be clinically deleterious for term and preterm newborns or infants with larger Crs during resuscitation. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Influence of use of ultrasound on the mechanical properties of plated pieces by welding in ultrasonic field

Directory of Open Access Journals (Sweden)

Gh. Amza

2015-07-01

Full Text Available Plating by welding in an ultrasonic field represents a technological solution to increase resistance to corrosion and / or wear of pieces of the machinery industry. Research has been carried out for two types of parts, namely a piece of flange end type and bonnet type made of AISI 4130 steel, and as filler material for plating was used Inconel 625 Fe developed as electrode wire with a diameter of ø 1.2 / mm. The plating was done by depositing a single layer by welding in ultrasonic field, welding process in Ar 100/ % environment non-consumable tungsten electrode, WIG process, and when using ultrasonic activation it was used a longitudinal and a transverse wave with a frequency of 15 / kHz. For pieces plated by welding there have been made attempts of the hardness and tensile and bend shock.

Effects of hardness of abrasive grains on surface roughness of work piece in PVA bonded grinding wheel

International Nuclear Information System (INIS)

Nitta, S.; Takata, A.; Ishizaki, K.

2000-01-01

The purpose of this study is to clarify relation between hardness of abrasive grains and surface roughness of work piece in the case of PVA (Polyvinyl alcohol) bonded grinding wheels. Two PVA bonded grinding wheels; with diamond or silicon carbide as abrasive grains and grinding of glass and aluminum alloy was performed. The PVA bonded grinding wheels The PVA bonded grinding wheel with silicon carbide could not grind the glass. Because insufficiency in hardness, the PVA bonded grinding wheel with the diamond abrasive grains caused deep scratch on the aluminum alloy. It was found that the final surface roughness of the work piece was not proportional to the hardness of abrasive grains. The suitable hardness of abrasive grains will be obtained by the hardness of work piece. Copyright (2000) AD-TECH - International Foundation for the Advancement of Technology Ltd

77 FR 59659 - Notice of Inventory Completion for Native American Human Remains and Associated Funerary Objects...

Science.gov (United States)

2012-09-28

... debitage, ground stone, and faunal materials, including modified and unmodified animal bones and teeth and... objects are a projectile point and a piece of flaked stone. In the Federal Register (65 FR 80957, December... associated funerary objects are 1 chert point and 48 pieces of flaked stone debitage. In the Federal Register...

[Simultaneous intrusion and retraction of the anterior teeth using a three-piece base arch].

Science.gov (United States)

Liu, D; Bai, D; Wang, C; Sun, W; Guo, J; Xi, R

2000-06-01

To evaluate the effects of the three-piece base arch on overbite correction of Class II malocclusion. 20 patients with high angle, flared incisors were treated using a three-piece base arch appliance. The intrusion force of four upper incisors was adjusted to approximately 50 g. The line of force action was 2 mm distally to the resistant center(RC) and the retraction force was 20 g, the right and left posterior segments were joined by a palatal bar. Cephalograms were taken before treatment (T1) and six months after treatment (T2). The upper molars moved mesially 0.60 +/- 0.35 mm and the distance of the vertical extrusion was 0.80 +/- 0.52 mm. The distances of the upper central incisor retraction and intrusion were -4.20 +/- 2.12 mm and 3.10 +/- 0.54 mm respectively. The RC of the central incisor retracted -4.12 +/- 1.96 mm and intruded 3.20 +/- 0.66 mm. The axial inclination of the upper incisor-palatal plane changed from 123.21 degrees +/- 4.26 degrees to 116.00 degrees +/- 3.96 degrees. The three-piece segmented approach can effectively intrude and retract the upper anterior teeth for flared incisors and deep overbite.

Value Recovery from Waste Liquid Crystal Display Glass Cullet through Leaching: Understanding the Correlation between Indium Leaching Behavior and Cullet Piece Size

OpenAIRE

Basudev Swain; Chan Gi Lee; Hyun Seon Hong

2018-01-01

For hydrometallurgical recovery of indium from glass cullet after dismantling a waste liquid crystal display (LCD), leaching is the rudimentary stage. Though size reduction of the cullet pieces adds convenience for recycling, from an efficiency and cost-effectiveness perspective regarding leaching process development, determining the proper cullet piece size is essential. Hence, in this study, leaching efficiency of indium as a function of cullet piece size was investigated, wherein the prope...

Statistical properties of randomly broken objects and of multivalley structures in disordered systems

International Nuclear Information System (INIS)

Derrida, B.; Flyvbjerg, H.

1987-02-01

The statistical properties of the multivalley structure of disordered systems and of randomly broken objects have lots of features in common. For all these problems, if W s denotes the weight of the s th piece, we show that the probability distributions P 1 (W 1 ) of the largest piece W 1 , P 2 (W 2 ) of the second largest piece, and Π(Y) of Y = Σ s W s 2 have always singularities at W 1 = 1/n, W 2 = 1/n and Y = 1/n, n = 1, 2, 3,... (orig.)

Mechanical Performance Evaluation of a Top End Piece for Dual Cooled Fuels

International Nuclear Information System (INIS)

Kim, Jae Yong; Yoon, Kyung Ho; Kim, Hyung Kyu; Choi, Woo Seok

2011-01-01

A fuel assembly consists of five major components, i.e., a top end piece (TEP), a bottom end piece (BEP), spacer grids (SGs), guide tubes (GTs) and an instrumentation tube (IT): in addition, it also includes fuel rods (FRs). The TEP/BEP should satisfy stress intensity limits according to the conditions A and B of ASME, Section III, Division 1.Subsection NB. In a dual-cooled fuel assembly, the array and position of fuel rods are different from those in a conventional PWR fuel assembly; these changes are necessary for achieving power uprating. The flow plates of the TEP and BEP have to be modified accordingly. The pattern and shape of the flow holes were newly designed. To verify the strength compatibility, the Tresca stress limit according to the ASME code was investigated in the case of an axial load of 22.241 kN. In this paper, the stress linearization procedure for strength evaluation of a newly designed TEP is presented

The role of phosphate in a multistep enzymatic reaction: reactions of the substrate and intermediate in pieces.

Science.gov (United States)

Kholodar, Svetlana A; Allen, C Leigh; Gulick, Andrew M; Murkin, Andrew S

2015-02-25

Several mechanistically unrelated enzymes utilize the binding energy of their substrate's nonreacting phosphoryl group to accelerate catalysis. Evidence for the involvement of the phosphodianion in transition state formation has come from reactions of the substrate in pieces, in which reaction of a truncated substrate lacking its phosphorylmethyl group is activated by inorganic phosphite. What has remained unknown until now is how the phosphodianion group influences the reaction energetics at different points along the reaction coordinate. 1-Deoxy-D-xylulose-5-phosphate (DXP) reductoisomerase (DXR), which catalyzes the isomerization of DXP to 2-C-methyl-D-erythrose 4-phosphate (MEsP) and subsequent NADPH-dependent reduction, presents a unique opportunity to address this concern. Previously, we have reported the effect of covalently linked phosphate on the energetics of DXP turnover. Through the use of chemically synthesized MEsP and its phosphate-truncated analogue, 2-C-methyl-D-glyceraldehyde, the current study revealed a loss of 6.1 kcal/mol of kinetic barrier stabilization upon truncation, of which 4.4 kcal/mol was regained in the presence of phosphite dianion. The activating effect of phosphite was accompanied by apparent tightening of its interactions within the active site at the intermediate stage of the reaction, suggesting a role of the phosphodianion in disfavoring intermediate release and in modulation of the on-enzyme isomerization equilibrium. The results of kinetic isotope effect and structural studies indicate rate limitation by physical steps when the covalent linkage is severed. These striking differences in the energetics of the natural reaction and the reactions in pieces provide a deeper insight into the contribution of enzyme-phosphodianion interactions to the reaction coordinate.

Guaranteeing uptime at worl's largest particle physics lab

CERN Multimedia

Brodkin, Jon

2007-01-01

"As the European agency CERN was gearing up to build the world's largest particle accelerator, officials there knew they could not afford to have problems in their technical infrastructure cause any downtime." (1 page)

Cataract Surgery with Foldable Single Piece IOLs in Congenital Cataract-Microcornea Syndrome

Directory of Open Access Journals (Sweden)

Niphon Chirapapaisan, M.D.

2017-11-01

Full Text Available Objective: To present the visual outcomes and intraocular lens (IOLs stability after cataract surgery with foldable single piece IOLs in a patient with congenital cataract-microcornea syndrome (CCMC. Case presentation: A 28-year-old woman presented with bilateral microcornea and posterior polar cataract. Her uncorrected (UDVA and corrected (CDVA distance visual acuities were 20/100, 20/160 and 20/80, 20/80, respectively. The horizontal cornea diameter was 9.0 mm in both eyes. Anterior chamber angle assessment (ACAA with Scheie classification showed grade 3 on the superior, inferior, and temporal site and grade 2 on the nasal site in both eyes. On ultrasound biomicroscopy (UBM, the anterior chamber depths were 2.35 mm. OD and 2.41 mm. OS. The axial lengths were 23.28 mm., OD and 22.50 mm. OS with the A-scan ultrasound biometry. The IOLs power calculation with SRK/T formulas was +25.00 diopter OD and +22.50 diopter OS (A-constant 118.4. Phacoemulsification was performed on both eyes. After lens aspiration, ruptured posterior capsule, a common complication occurred. Then anterior vitrectomy was performed. A foldable single piece IOLs without haptic trimming was implanted in the sulcus in each eye. CDVA was 20/63 equally in both eyes. The intraocular pressure was 12 and 14 mmHg. ACAA showed grade 2 and no pigment dispersion. The IOLs had no tilt or decentration. UBM showed the IOLs were in the proper position and were not rubbing the iris. Conclusion: The foldable single piece IOLs without haptic trimming in the sulcus were safely implanted in both eyes with microcornea in CCMC.

One-Piece Zirconia Ceramic versus Titanium Implants in the Jaw and Femur of a Sheep Model: A Pilot Study.

Science.gov (United States)

Siddiqi, A; Duncan, W J; De Silva, R K; Zafar, S

2016-01-01

Reports have documented titanium (Ti) hypersensitivity after dental implant treatment. Alternative materials have been suggested including zirconia (Zr) ceramics, which have shown predictable osseointegration in animal studies and appear free of immune responses. The aim of the research was to investigate the bone-to-implant contact (BIC) of one-piece Zr, compared with one-piece Ti implants, placed in the jaws and femurs of domestic sheep. Ten New Zealand mixed breed sheep were used. A One-piece prototype Ti (control) and one Zr (test) implant were placed in the mandible, and one of each implant (Ti and Zr) was placed into the femoral epicondyle of each animal. The femur implants were submerged and unloaded; the mandibular implants were placed using a one-stage transgingival protocol and were nonsubmerged. After a healing period of 12 weeks, %BIC was measured. The overall survival rate for mandibular and femur implants combined was 87.5%. %BIC was higher for Zr implants versus Ti implants in the femur (85.5%, versus 78.9%) ( p = 0.002). Zirconia implants in the mandible showed comparable %BIC to titanium implants (72.2%, versus 60.3%) ( p = 0.087). High failure rate of both Zr and Ti one-piece implants in the jaw could be attributed to the one-piece design and surface characteristics of the implant that could have influenced osseointegration. Further clinical trials are recommended to evaluate the performance of zirconia implants under loading conditions.

From Pushing Paper to Pushing Dirt - Canada's Largest LLRW Cleanup Gets Underway - 13111

International Nuclear Information System (INIS)

Veen, Walter van; Lawrence, Dave

2013-01-01

The Port Hope Project is the larger of the two projects in the Port Hope Area Initiative (PHAI), Canada's largest low level radioactive waste (LLRW) cleanup. With a budget of approximately $1 billion, the Port Hope Project includes a broad and complex range of remedial elements from a state of the art water treatment plant, an engineered waste management facility, municipal solid waste removal, remediation of 18 major sites within the Municipality of Port Hope (MPH), sediment dredging and dewatering, an investigation of 4,800 properties (many of these homes) to identify LLRW and remediation of approximately 450 of these properties. This paper discusses the status of the Port Hope Project in terms of designs completed and regulatory approvals received, and sets out the scope and schedule for the remaining studies, engineering designs and remediation contracts. (authors)

Debris filtering effectiveness and pressure drop tests of debris resistance-bottom end piece

International Nuclear Information System (INIS)

Chung, Moon Ki; Song, Chul Hwa; Chung, Heung June; Won, Soon Yeun; Cho, Young Ro; Kim, Bok Deuk

1992-03-01

In this final report, described are the test conditions and test procedures for the debris filtering effectiveness and pressure drop tests for developing the Debris Resistance-Bottom End Piece (DR-BEP). And the test results are tabulated for later evaluation. (Author)

The world's largest LNG producer's next market

International Nuclear Information System (INIS)

Fuller, R.; Isworo Suharno; Simandjuntak, W.M.P.

1996-01-01

The development of the domestic gas market in Indonesia, the world's largest liquefied natural gas producing country, is described as part of the overall impact of the country's oil and gas production. The first large scale use of natural gas in Indonesia was established in 1968 when a fertiliser plant using gas as the feedstock was built. Ultimately, through increased yields, this has enabled Indonesia to be self-sufficient in rice and an exporter of fertiliser. Problems which stand in the way of further developments include: capital, though Pertamina and PGN are perceived as attractive for foreign investment; the lack of a regulatory framework for gas; geographical constraints, among them the fact that the gas deposits are remote from the largest population concentrations; lack of infrastructure. There are nevertheless plans for expansion and the provision of an integrated gas pipeline system. Pertamina, which has responsibility for all oil and gas developments, and PGN, whose primary role has been as a manufacturer and distributor of gas, are now working together in the coordination of all gas activities. (10 figures). (UK)

Worlds Largest Wave Energy Project 2007 in Wales

DEFF Research Database (Denmark)

Christensen, Lars; Friis-Madsen, Erik; Kofoed, Jens Peter

2006-01-01

This paper introduces world largest wave energy project being developed in Wales and based on one of the leading wave energy technologies. The background for the development of wave energy, the total resource ands its distribution around the world is described. In contrast to wind energy turbines...... Dragon has to be scaled in accordance with the wave climate at the deployment site, which makes the Welch demonstrator device the worlds largest WEC so far with a total width of 300 meters. The project budget, the construction methods and the deployment site are also given....... a large number of fundamentally different technologies are utilised to harvest wave energy. The Wave Dragon belongs to the wave overtopping class of converters and the paper describes the fundamentals and the technical solutions used in this wave energy converter. An offshore floating WEC like the Wave...

First Experience from the World Largest fully commercial Solar Heating Plant

DEFF Research Database (Denmark)

Heller, Alfred; Furbo, Simon

1997-01-01

The first experience from the largest solar heating plant in the world is given. The plant is situated in Marstal and is has a total area of 8000 square m.......The first experience from the largest solar heating plant in the world is given. The plant is situated in Marstal and is has a total area of 8000 square m....

Two-piece cryopreserved tracheal allotransplantation: an experimental study.

Science.gov (United States)

Iyikesici, Tuncel; Tuncozgur, Bulent; Sanli, Maruf; Isik, Ahmet Feridun; Meteroglu, Fatih; Elbeyli, Levent

2009-10-01

For successful reconstruction with tracheal allotransplants following long tracheal resections, problems related to the preservation and vascularisation of the tracheal graft have to be solved. In this study, instead of using a long-segment single-piece graft, we used a graft that has been split into two. The aim was to use this graft after cryopreservation in order to ease neo-vascularisation and to maintain tracheal integrity by transplanting it to two separate regions of the dog cervical trachea. This experimental study was conducted in animal laboratories of the medical school on 11 half-blood dogs. The trachea obtained from the first dog was 8 cm in length; it was split into two pieces of 4 cm each and stored in the preservation solution at -80 degrees C for 4 weeks. Following this, the dog was sacrificed. Two 2 cm portions of cervical trachea were excised from the second dog. These parts were then reconstructed with two tracheal grafts of the same length as the cryopreserved ones. Ten dogs that were grouped into five groups of two dogs each underwent the same procedure. The subjects had a bronchoscopic evaluation on the third postoperative week. Anastomosis regions of the test tracheas were resected to be examined histopathologically. Seven subjects were found to have third-degree obstructions during bronchoscopy; two had close to fourth-degree obstructions. In the histopathological examination, contrary to the findings of the bronchoscopies, 75% of the anastomoses had intact epithelium. The cartilage was seen to have well-preserved structural characteristics in all the anastomoses. Twelve anastomoses had moderate, seven mild and one had severe inflammation. All anastomoses had either good or very good level of vascularisation. The integrity of the tracheal epithelium can be maintained with cryopreservation and split anastomosis technique. The cartilage preserves its structural characteristics despite losing its viability, thereby offering an advantage to

Process for the fixing of a metallic end piece on a tubular component

International Nuclear Information System (INIS)

Charpin, Jean.

1975-01-01

Under this invention the process makes it possible to joint a tubular component and in particular a tubular filter and an end piece, with a connection of great mechanical strength, perfectly leak proof and with excellent corrosion resistance, particularly with respect to fluorinated by-products. This process is therefore of great worth in fixing to a bearer a thin ceramic compound tubular filter element, since such a filter can be used in particular for the separation of uranium isotopes by gaseous diffusion and for the separation of hydrocarbons in petrochemicals. To this end, the process under consideration is characterised in that it consists in depositing a layer of ceramic material, by hot projection, at the end of the tubular element and in sealing the end piece to the end of the tubular element by the hot projection of a ceramic or metallic substance [fr

Patient’s satisfaction after 2-piece inflatable penile prosthesis implantation: An Italian multicentric study

Directory of Open Access Journals (Sweden)

Giorgio Gentile

2016-03-01

Full Text Available Introduction: Penile prosthesis implant represents a valuable solution for pts with severe erectile dysfunction (ED, non-responders to medical management. The aim of our study was to evaluate the satisfaction of patients (pts after 2-pieces inflatable penile prosthesis (IPP. Aim of the study: to evaluate safety, reliability and post-operative patient’s satisfaction after implantation of two-pieces IPP. Materials and Methods: This retrospective multicentric analysis concerns a group of 42 patients undergone 2-pieces IPP implantation from November 2005 to November 2013, in four Centers of proven experience. As a first step, a detailed review of all clinical reports was performed. Secondly, every patient was asked to fill the Erectile Dysfunction Inventory of Treatment Satisfaction (EDITS specifically modified, in order to assess their own satisfaction after surgery and, its impact on patient’s quality of sexual life. Results: 42 pts were evaluated (AMS-Ambicor: 28; Coloplast- Excell: 14; mean age, at time of operation: 60,7 years; mean follow up: 27,6 months; etiology of ED: vascular 23,8%, diabetes 19%, La Peyronie D. 7,1%, consequence of radical prostatectomy 31%, consequence of other pelvic surgery 11,9%, spinal trauma 7%. Mean operative time: 117 ± 58 min, mean postoperative hospital stay 3 ± 1,6 days. Post operative short-term complications: 4 pts (9,5%. Post operative long-term complications: 4 pts (9,5%. Long-term functional results (Questionnaire: 71% of pts (30 reported regular use of the prosthesis, at least 1 time/week, the satisfaction was good in 42% of pts (18, quite good in 33,3% (14, quite bad in 2,4% (1, very bad in 7,1% (3, 6 pts (14,4% didn’t answer. Conclusions: 2 pieces IPP appears to be associated with a low complication rate and good satisfaction of pts especially in the elderly. It also assures satisfactory rates of aesthetics and functional results.

Challenges with the largest commercial hydrogen station in the world

Energy Technology Data Exchange (ETDEWEB)

Charbonneau, Thomas; Gauthier, Pierre [Air Liquide Canada (Canada)

2010-07-01

This abstract's objective is to share with the participants the story of the largest hydrogen fueling station made to this date and to kick-start the story, we will cover the challenges; first the technical ones; the operational ones; the distribution ones and; the financial ones. We will then move on to review the logistic (geographic) issues raised by the project and conclude our presentation by sharing the output values of the largest fueling station built so far in the world. (orig.)

Keeping All the PIECES: Phylogenetically Informed Ex Situ Conservation of Endangered Species.

Science.gov (United States)

Larkin, Daniel J; Jacobi, Sarah K; Hipp, Andrew L; Kramer, Andrea T

2016-01-01

Ex situ conservation in germplasm and living collections is a major focus of global plant conservation strategies. Prioritizing species for ex situ collection is a necessary component of this effort for which sound strategies are needed. Phylogenetic considerations can play an important role in prioritization. Collections that are more phylogenetically diverse are likely to encompass more ecological and trait variation, and thus provide stronger conservation insurance and richer resources for future restoration efforts. However, phylogenetic criteria need to be weighed against other, potentially competing objectives. We used ex situ collection and threat rank data for North American angiosperms to investigate gaps in ex situ coverage and phylogenetic diversity of collections and to develop a flexible framework for prioritizing species across multiple objectives. We found that ex situ coverage of 18,766 North American angiosperm taxa was low with respect to the most vulnerable taxa: just 43% of vulnerable to critically imperiled taxa were in ex situ collections, far short of a year-2020 goal of 75%. In addition, species held in ex situ collections were phylogenetically clustered (P species been drawn at random. These patterns support incorporating phylogenetic considerations into ex situ prioritization in a manner balanced with other criteria, such as vulnerability. To meet this need, we present the 'PIECES' index (Phylogenetically Informed Ex situ Conservation of Endangered Species). PIECES integrates phylogenetic considerations into a flexible framework for prioritizing species across competing objectives using multi-criteria decision analysis. Applying PIECES to prioritizing ex situ conservation of North American angiosperms, we show strong return on investment across multiple objectives, some of which are negatively correlated with each other. A spreadsheet-based decision support tool for North American angiosperms is provided; this tool can be customized to

Learning and Memory Processes Following Cochlear Implantation: The Missing Piece of the Puzzle

Science.gov (United States)

Pisoni, David B.; Kronenberger, William G.; Chandramouli, Suyog H.; Conway, Christopher M.

2016-01-01

At the present time, there is no question that cochlear implants (CIs) work and often work very well in quiet listening conditions for many profoundly deaf children and adults. The speech and language outcomes data published over the last two decades document quite extensively the clinically significant benefits of CIs. Although there now is a large body of evidence supporting the “efficacy” of CIs as a medical intervention for profound hearing loss in both children and adults, there still remain a number of challenging unresolved clinical and theoretical issues that deal with the “effectiveness” of CIs in individual patients that have not yet been successfully resolved. In this paper, we review recent findings on learning and memory, two central topics in the field of cognition that have been seriously neglected in research on CIs. Our research findings on sequence learning, memory and organization processes, and retrieval strategies used in verbal learning and memory of categorized word lists suggests that basic domain-general learning abilities may be the missing piece of the puzzle in terms of understanding the cognitive factors that underlie the enormous individual differences and variability routinely observed in speech and language outcomes following cochlear implantation. PMID:27092098

Learning and Memory Processes Following Cochlear Implantation:The Missing Piece of the Puzzle

Directory of Open Access Journals (Sweden)

David B. Pisoni

2016-04-01

Full Text Available At the present time, there is no question that cochlear implants work and often work very well in quiet listening conditions for many profoundly deaf children and adults. The speech and language outcomes data published over the last two decades document quite extensively the clinically significant benefits of cochlear implants. Although there now is a large body of evidence supporting the efficacy of cochlear implants as a medical intervention for profound hearing loss in both children and adults, there still remain a number of challenging unresolved clinical and theoretical issues that deal with the effectiveness of cochlear implants in individual patients that have not yet been successfully resolved. In this paper, we review recent findings on learning and memory, two central topics in the field of cognition that have been seriously neglected in research on cochlear implants. Our research findings on sequence learning, memory and organization processes, and retrieval strategies used in verbal learning and memory of categorized word lists suggests that basic domain-general learning abilities may be the missing piece of the puzzle in terms of understanding the cognitive factors that underlie the enormous individual differences and variability routinely observed in speech and language outcomes following cochlear implantation.

Multiple piece turbine engine airfoil with a structural spar

Science.gov (United States)

Vance, Steven J [Orlando, FL

2011-10-11

A multiple piece turbine airfoil having an outer shell with an airfoil tip that is attached to a root with an internal structural spar is disclosed. The root may be formed from first and second sections that include an internal cavity configured to receive and secure the one or more components forming the generally elongated airfoil. The internal structural spar may be attached to an airfoil tip and place the generally elongated airfoil in compression. The configuration enables each component to be formed from different materials to reduce the cost of the materials and to optimize the choice of material for each component.

Brief report: Examining children's disruptive behavior in the wake of trauma - A two-piece growth curve model before and after a school shooting.

Science.gov (United States)

Liao, Yue; Shonkoff, Eleanor T; Barnett, Elizabeth; Wen, C K Fred; Miller, Kimberly A; Eddy, J Mark

2015-10-01

School shootings may have serious negative impacts on children years after the event. Previous research suggests that children exposed to traumatic events experience heightened fear, anxiety, and feelings of vulnerability, but little research has examined potential aggressive and disruptive behavioral reactions. Utilizing a longitudinal dataset in which a local school shooting occurred during the course of data collection, this study sought to investigate whether the trajectory of disruptive behaviors was affected by the shooting. A two-piece growth curve model was used to examine the trajectory of disruptive behaviors during the pre-shooting years (i.e., piece one) and post-shooting years (i.e., piece two). Results indicated that the two-piece growth curve model fit the data better than the one-piece model and that the school shooting precipitated a faster decline in aggressive behaviors. This study demonstrated a novel approach to examining effects of an unexpected traumatic event on behavioral trajectories using an existing longitudinal data set. Copyright © 2015 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

Brief Report: Examining children’s disruptive behavior in the wake of trauma - A two-piece growth curve model before and after a school shooting

Science.gov (United States)

Liao, Yue; Shonkoff, Eleanor T.; Barnett, Elizabeth; Wen, CK Fred; Miller, Kimberly A.; Eddy, J. Mark

2015-01-01

School shootings may have serious negative impacts on children years after the event. Previous research suggests that children exposed to traumatic events experience heightened fear, anxiety, and feelings of vulnerability, but little research has examined potential aggressive and disruptive behavioral reactions. Utilizing a longitudinal dataset in which a local school shooting occurred during the course of data collection, this study sought to investigate whether the trajectory of disruptive behaviors was affected by the shooting. A two-piece growth curve model was used to examine the trajectory of disruptive behaviors during the pre-shooting years (i.e., piece one) and post-shooting years (i.e., piece two). Results indicated that the two-piece growth curve model fit the data better than the one-piece model and that the school shooting precipitated a faster decline in aggressive behaviors. This study demonstrated a novel approach to examining effects of an unexpected traumatic event on behavioral trajectories using an existing longitudinal data set. PMID:26298676

Surgical management of cross-bites in orthognathic surgery: Surgically assisted rapid maxillary expansion (SARME) versus two-piece maxilla.

Science.gov (United States)

Seeberger, Robin; Gander, Evelyn; Hoffmann, Jürgen; Engel, Michael

2015-09-01

The surgical treatment of cross-bites includes surgically-assisted maxillary expansion (SARME) or maxillary-bipartition during bimaxillary surgery. This study evaluates and compares the changes in the teeth and lower nasal passage, as well as the stability of the expansion. The measurements were performed on the cone-beam computed tomography (CBCT) scans of 32 patients with transverse (width) deficiencies of the maxilla. To expand the maxilla, 12 patients underwent the two-piece maxilla method, while 20 patients received SARME. The mean distraction width for SARME was 6.8 mm (SD 3.7), while that for the two-piece maxilla was 4.1 mm (SD 1.6). The expansion with SARME was over the entire length of the maxilla, from anterior to posterior, whereas the expansion of the two-piece patient group was only in the posterior part of the maxilla. The segments of the maxilla opened nearly parallel in SARME, while they were reverse V-shaped in the two-piece maxilla, from anterior to posterior. A key point in the planning of combined orthodontic-orthognathic therapy with surgical correction of a cross-bite is the precise determination of the area where the width needs to be increased, and the amount of correction needed to treat the patient using minimal surgical procedures. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

The last piece of the ring

CERN Multimedia

2008-01-01

In a sequel to the recent success at CMS, the last section of the LHC beam vacuum system was installed in ATLAS on Monday 16 June. The place where experiment and accelerator meet, the completion of the last part of the continuous 27 km beampipe signals how near the LHC is to the circulation of its first beam. Watch the video! The last section of the LHC beampipe being installed in ATLAS.Although a seemingly simple piece of technology in comparison with the complexity of the detectors, the beampipe is a carefully designed and essential part of both the experiments and the LHC. The section of beam pipe that completed the LHC ring on Monday 16 June is about 20 metres from the centre of ATLAS, very close to where the first magnets of the LHC are located. Unlike the central ATLAS beampipe, which is made of beryllium, the final section is made of stainless steel. An aluminium cone surrounds the stainless steel tube with the super slim...

Building Earth's Largest Library: Driving into the Future.

Science.gov (United States)

Coffman, Steve

1999-01-01

Examines the Amazon.com online bookstore as a blueprint for designing the world's largest library. Topics include selection; accessibility and convenience; quality of Web sites and search tools; personalized service; library collection development, including interlibrary loan; library catalogs and catalog records; a circulation system; costs;…

Toward sustainable harvesting of Africa's largest medicinal plant ...

African Journals Online (AJOL)

Global demand for treating prostate disorders with Prunus africana bark extract has made P. africana Africa's largest medicinal plant export. Unsustainable harvesting practices can lead to local extirpations of this multipurpose tree. Survey research targeting P. africana harvesters in a Tanzania forest reserve revealed that ...

PuzzleArt Therapy: Connecting the Pieces in Search of Answers

Directory of Open Access Journals (Sweden)

Jennifer Fortuna

2016-10-01

Full Text Available Alli Berman, a New York based artist, provided the cover art for the Fall 2016 issue of The Open Journal of Occupational Therapy (OJOT. “Sunlight Underwater” is a 12 piece PuzzleArt painting made from acrylic on American maple that measures 22x30. The PuzzleArt concept began as a simple exercise that evolved into a therapeutic modality. When a sudden stroke impacted Berman’s well-being and quality of life, it was art that helped her to make connections during recovery.

FEA analysis and design optimization for a multifunctional piece of furniture

Directory of Open Access Journals (Sweden)

Haraga Georgeta

2017-01-01

Full Text Available The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with a solid modelling for the creation of the desired piece of multifunctional furniture is used in this case, the automatic generation of the finite element meshes. Getting more accurate results for the mesh refinement process can be made by changing parameters. The article outlines the developed model for analysing the supporting structure of the armchair. This model provides simulating of the different loads and checking the raised stresses and deformation in the structures analysed. The main objective of this research is to evaluate strength of wooden cedar armchair for a person weighing 140 kg and for this the finite element analysis (FEA has been used. Multifunctional furniture is the answer to the challenges contemporary lifestyle, creativity in design activities that require optimal space utilization and reducing costs.

FEA analysis and design optimization for a multifunctional piece of furniture

OpenAIRE

Haraga Georgeta; Goanță Adrian Mihai

2017-01-01

The paper presents an original approach to the integration of computer aided design and finite element analysis for a multifunctional piece of furniture using CATIA Generative Structural Analysis workbench. Finite Element Analysis (FEA) application is an important engineering technique in the furniture industry. FEA is an accurate method for numerical solution of field problems. A major problem of mesh generation today is access to CAD geometry in a efficient and precise manner. Starting with...

Kabob report. Pt. 3. Chevron plant largest in Canada

Energy Technology Data Exchange (ETDEWEB)

1971-01-18

Canada's largest fully integrated primary natural- gas processing and sulfur recovery plant is heading for physical completion by mid-summer of 1971. The Ralph M. Parsons Construction Co. of Canada Ltd., contractor for the S. Kaybob Beaverhill Lake Unit No. 3 gas-processing plant, to be operated by Chevron Standard Ltd., estimates completion by June 30. After that the $80 million complex will have tests and running in time. With any reasonable luck, it should be fully on stream by late summer. Preliminary construction on the 200-acre site started in Jan. 1969 with clearing and contouring of the main plant and sulfur storage sites. Initial rough grading started in the early summer, after spring breakup was over. Delivery of most of the big items was made by rail because the local secondary roads were inadequate for them. Concrete has been a large item. The contractor has its own batch plant on the site for the estimated 28,000 cu yd which will be needed for the whole job. Dominating the construction site from the start has been the high sulfur plant stack, first of the major items to be finished. It will serve to dispose of effluent from the largest sulfur recovery unit in Canada. It is 465 ft high, one of the largest in Alberta, and a significant contribution to pollution control and environmental protection.

Multiple sclerosis pathogenesis: missing pieces of an old puzzle.

Science.gov (United States)

Rahmanzadeh, Reza; Brück, Wolfgang; Minagar, Alireza; Sahraian, Mohammad Ali

2018-06-08

Traditionally, multiple sclerosis (MS) was considered to be a CD4 T cell-mediated CNS autoimmunity, compatible with experimental autoimmune encephalitis model, which can be characterized by focal lesions in the white matter. However, studies of recent decades revealed several missing pieces of MS puzzle and showed that MS pathogenesis is more complex than the traditional view and may include the following: a primary degenerative process (e.g. oligodendroglial pathology), generalized abnormality of normal-appearing brain tissue, pronounced gray matter pathology, involvement of innate immunity, and CD8 T cells and B cells. Here, we review these findings and discuss their implications in MS pathogenesis.

Apparatus of irradiation of steel test pieces in the Marcoule pile G 1

International Nuclear Information System (INIS)

Marinot, R.; Wallet, Ph.

1960-01-01

Test pieces of steel were irradiated in the reactor G1 at Marcoule, in convectors replacing fuel elements, and in vertical channels in furnace-heated containers. The apparatus designed for this irradiation is described: containers, converter-rods, suspension fixtures and clamps, temperature measurement devices, lead castles and unloading set-ups. (author) [fr

One-Piece Implant-Retained Mandibular Overdentures By Pre-Fabricated Titanium Telescopic Attachments and Frictional Varnish: A Two-Year Prospective Study.

Science.gov (United States)

Nik, Shahram Namjoy; Nejatian, Touraj

2016-12-01

Clinical efficiency of one-piece screw-type implants with telescopic were attachments evaluated in this study. Twenty-four patients received a mandibular implant-supported overdenture and maxillary complete denture. Ninety-six one-piece implants were inserted in the inter-foraminal area. Implants were immediately loaded with an implant-retained overdenture and telescopic attachments which had frictional retention elements. There was 0.25±0.24 mm, 0.32±0.25 mm, 0.43±0.30 mm, 0.61±0.30 mm and of bone resorption after 3, 6, 12 and 24 months, respectively. The need to activate the frictional retention was the most common complication. Treatment outcomes for prefabricated telescopic retained overdentures on one-piece implants are similar to that obtained in cases of delayed loading. Copyright© 2016 Dennis Barber Ltd.

Computer Tool for Automatically Generated 3D Illustration in Real Time from Archaeological Scanned Pieces

Directory of Open Access Journals (Sweden)

Luis López

2012-11-01

Full Text Available The graphical documentation process of archaeological pieces requires the active involvement of a professional artist to recreate beautiful illustrations using a wide variety of expressive techniques. Frequently, the artist’s work is limited by the inconvenience of working only with the photographs of the pieces he is going to illustrate. This paper presents a software tool that allows the easy generation of illustrations in real time from 3D scanned models. The developed interface allows the user to simulate very elaborate artistic styles through the creation of diagrams by using the available virtual lights. The software processes the diagrams to render an illustration from any given angle or position. Among the available virtual lights, there are well known techniques as silhouettes enhancement, hatching or toon shading.

Study of ancient Islamic gilded pieces combining PIXE-RBS on external microprobe with sem images

International Nuclear Information System (INIS)

Ynsa, M.D.; Gutierrez, P.C.; Enguita, O.; Chamon, J.; Pardo, A.I.; Arroyo, M.; Barrio, J.; Gomez-Morilla, I.; Ferretti, M.; Climent-Font, A.

2008-01-01

Numerous metallic objects with very aesthetic and technological qualities have been recovered by archaeological excavations. Adequate processes of restoration and conservation treatments require the accurate determination of the elemental composition and distribution within the objects, as well as the identification of the nature and distribution of the corrosion products. Ideally the identification method should cause no alteration in the sample. In this work, different archaeological pieces with a gilded look have been characterized using simultaneously PIXE and RBS at the CMAM external microprobe in order to study the gilding metalworking done in the Iberian Peninsula during the Middle Ages. The gold layer thickness and its elemental concentrations of Ag, Au and Hg were determined by both techniques and compared with the scanning electron microscopy images obtained for some fragments of pieces. (orig.)

Upgrade and modernization of the six largest HPPs in Macedonia

International Nuclear Information System (INIS)

Hadzievska, M.

2002-01-01

In 1998, Electric Power Company of Macedonia and the International Bank for Development and Reconstruction, started the Power System Improvement Project a part of which is the Project for rehabilitation of the six largest Hydro Power Plants (HPPs) in the Republic of Macedonia. The six largest Hydro Power Plants (HPP Vrutok, HPP Raven, HPP Globocica, HPP Tikves and HPP Spilje and HPP Vrben) represent 91% of the country's hydropower capacity. The rehabilitation program is divided in five parts (contracts) and covers the refurbishment of: turbine runners, turbine and generator bearings, governors, inlet valves; butterfly valves, including accessories and control systems; generators, excitation system and voltage regulation; control system, protection and LV auxiliaries; switch gears and control gears in 220 kV, 110 kV and 35 kV substations. At the moment, only the implementation of switch gears has started, the first phase is already finished, and 50 % of the rehabilitation works for HPP Vrutok, the largest HPP, has been finished. With the realization of this project, greater hydropower production is expected. It also expected that HPPs will become a more vital part of the Macedonian power system

Numerical Simulation of a Grinding Process for the Spatial Work-pieces: a Model of the Workpiece and Grinding Wheel

Directory of Open Access Journals (Sweden)

I. A. Kiselev

2015-01-01

Full Text Available The paper describes a spatial grinding dynamics mathematical model. This model includes a grinding wheel dynamics model, a work-piece dynamics model, and a numerical algorithm of geometric modeling as well. The geometric modeling algorithm is based on the Z-buffer method with author’s modifications. This algorithm allows us to simulate the formation of a new workpiece surface when removing material and as well as to determine the cutting layer thickness for each abrasive grain of the grinding wheel. The use of the surface cell bilinear approximation and the simultaneous use of multiple projection directions are the special features of the algorithm. These features improve modeling quality of machined surface. The grinding wheel model is represented as cutting micro-edges (grains set. Abrasive grains are randomly distributed on the wheel outer surface. Grains size, shape, wheel structure and graininess are taken into account. To determine the uncut chip thickness, which is cut off by each grain of the grinding wheel is used the algorithm, which finds intersection point of uncut work-piece surface with radial ray passing through the grain cutting edge. Grinding forces for each grain are defined based on the cutting layer thickness value using the phenomenological models described in the literature. Using transformations described in the article, grinding forces determined for each grain are reduced to the total grinding force, which acts on the tool and machined work-piece in the appropriate coordinate systems. Work-piece dynamics is modeled with the help of the finite element method using quadratic tetrahedral elements. The described model of spatial grinding dynamics makes it possible to evaluate the level of vibration and grinding forces, as well as the shape errors and surface quality of machined work-piece.

Preservation of refrigerated calf meat pieces by ionization

International Nuclear Information System (INIS)

Hassouna, M.; Besbes, M.; Ben Hassen, A.; Mahjoub, A.; Maalej, M.

1998-01-01

The influence of five 60Co gamma radiation doses in the range of 1 to 5 kGy on chemical composition and bacteriological counts of pieces of calf meat, partially vacuum - packed before treatment, was studied during storage at + 4 degree C up to 28 days. In vivo thermoluminescence dosimetry (TLD) using dosimeters such as lithium fluoride (LiF) was used as a very sensitive procedure to control both dose delivered to the red meat and its degree of uniformity. These two parameters are generally recommended for the quality control of food irradiation process. While ionizing radiation doses of 1 or 2 kGy were unable to increase the shelf life of treated meat, doses of 3, 4 or 5 kGy were very efficient, and adequate to prevent completely the growth of microorganisms indicating faecal contamination such as total coliforms, faecal coliforms and Enterobacteriaceae; they also kept constant the contents of total mesophilic flora and maintained radioresistant psychrotrophic microflora below the value inducing superficial putrefaction of meat (10 7 CFU cntdot g -1 ) at all storage times. Pathogenic germs producing contaminating toxins in foodstuffs such as Salmonella, Staphylococcus aureus and anaerobic sulfite reducing bacteria were totally absent in both control and treated meat. When pieces of meat were irradiated with doses of 3, 4 or 5 kGy, microbial alcalinization and proteolysis revealed by total volatile basic nitrogen were very low during the whole storage period. In addition, total protein did not change as a result of treatment during that period. However, superficial browning and significant variations were observed in water - holding capacity and saturated and unsaturated fatty acids contents in the free fat of treated meat. Ionizing radiation doses had no effect on weight losses and even on the variations of pH after heating of ground calf meat in double boiler at 50, 70 or 90 degree C up to 1 h. However, these modifications very sensitive to cooking temperature

Dramatherapy and Family Therapy in Education: Essential Pieces of the Multi-Agency Jigsaw

Science.gov (United States)

McFarlane, Penny; Harvey, Jenny

2012-01-01

A collaborative therapeutic approach often proves the best way to assess and meet the needs of children experiencing barriers to learning. This book gives a concise overview of drama and family therapy and describes how both therapies can work together to provide essential pieces of the jigsaw of emotional support for troubled children within an…

Effect of waste synthetic bag pieces on the CBR value of expansive Soil

Directory of Open Access Journals (Sweden)

Ajay Kumar Agarwal

2015-03-01

Full Text Available Expansive soils such as black cotton soil which are widely distributed in India have a tendency for volume changes due to change in moisture content. Also exhibits very low bearing capacity and high compressibility. Stabilization of such soil by admixture is used commonly now days. But no mix is suitable to improve all the types of soil. But it is obvious that depending on type of soil & type of admixture the optimum mix can be designed.  In this paper a mix has been designed to improve the bearing capacity of soil by using fly ash and lime mixture, reinforced with waste synthetic bag pieces. Various tests are carried out to determine the CBR value and other soil properties with and without using any admixture and reinforcement. The maximum value of CBR was found to be23.82% for 2.5 mm penetration and 22.21% for 5 mm penetration, when waste synthetic bag pieces of size 2 cm * 2 cm were used at a proportion of 0.1%.

The effect of limb amputation on standing weight distribution in the remaining three limbs in dogs.

Science.gov (United States)

Cole, Grayson Lee; Millis, Darryl

2017-01-16

Despite the fact that limb amputation is a commonly performed procedure in veterinary medicine, quantitative data regarding outcomes are lacking. The intention of this study was to evaluate the effect of limb amputation on weight distribution to the remaining three limbs at a stance in dogs. Ten dogs with a prior forelimb amputation and ten dogs with a prior hindlimb amputation; all of which had no history of orthopaedic or neural disease in the remaining three limbs were included in the study. Standing weight bearing was evaluated with a commercial stance analyzer in all dogs. Five valid trials were obtained and a mean percentage of weight bearing was calculated for each remaining limb. The dogs with a previous forelimb amputation, and also those with a previous hindlimb amputation, had the largest mean increase in weight bearing in the contralateral forelimb. In conclusion, proactive monitoring of orthopaedic disease in the contralateral forelimb may be advisable in dogs with a previous limb amputation. In addition, when determining candidacy for a limb amputation, disease of the contralateral forelimb should be thoroughly evaluated.

NAFTA: The World's Largest Trading Zone Turns 20

Science.gov (United States)

Ferrarini, Tawni Hunt; Day, Stephen

2014-01-01

Everyone under the age of 20 who has grown up in North America has lived in the common market created by NAFTA--the North American Free Trade Agreement. In a zone linking the United States, Canada, and Mexico, most goods and investments flow freely across borders to users, consumers, and investors. In 1994, NAFTA created the largest relatively…

Recovery of human remains after shark attack.

Science.gov (United States)

Byard, Roger W; James, Ross A; Heath, Karen J

2006-09-01

Two cases of fatal shark attack are reported where the only tissues recovered were fragments of lung. Case 1: An 18-year-old male who was in the sea behind a boat was observed by friends to be taken by a great white shark (Carcharodon carcharias). The shark dragged him under the water and then, with a second shark, dismembered the body. Witnesses noted a large amount of blood and unrecognizable body parts coming to the surface. The only tissues recovered despite an intensive beach and sea search were 2 fragments of lung. Case 2: A 19-year-old male was attacked by a great white shark while diving. A witness saw the shark swim away with the victim's body in its mouth. Again, despite intensive beach and sea searches, the only tissue recovered was a single piece of lung, along with pieces of wetsuit and diving equipment. These cases indicate that the only tissue to escape being consumed or lost in fatal shark attacks, where there is a significant attack with dismemberment and disruption of the integrity of the body, may be lung. The buoyancy of aerated pulmonary tissue ensures that it rises quickly to the surface, where it may be recovered by searchers soon after the attack. Aeration of the lung would be in keeping with death from trauma rather than from drowning and may be a useful marker in unwitnessed deaths to separate ante- from postmortem injury, using only relatively small amounts of tissues. Early organ recovery enhances the identification of human tissues as the extent of morphologic alterations by putrefactive processes and sea scavengers will have been minimized. DNA testing is also possible on such recovered fragments, enabling confirmation of the identity of the victim.

The Environmental Responsibility of the World’s Largest Banks

Directory of Open Access Journals (Sweden)

Ryszawska Bożena

2018-03-01

Full Text Available Sustainability transition is changing the role and function of banks, specially their products and services also in relation to stakeholders. Banks are one of the main actors supporting the transition to sustainable economy. The purpose of this study is to emphasise the role of world’s largest banks in that process. Banks are slowly responding to the new demand of sustainability and responsibility, and they try to align with it. The paper is based on an overview of the world’s five largest banks that employ corporate social responsibility (CSR reporting standards, together with detailed enumeration of pro-environmental activities included in the reports. The first section of this paper presents the most popular approaches to the problem at hand, as reported in professional literature. Section two presents the characteristics of the CSR actions in banks. The third section discusses the environmental actions of the biggest banks in Global Reporting Initiative (GRI reporting the most popular standard for reporting non-financial information. And the last part of the paper presents the conclusions resulting from the article. The research was conducted using a variety of sources, such as scientific articles, statistical data, CSR reports of the world’s largest banks, as well reporting principles and standard disclosures. The basic method used in the process of writing was a critical analysis of literature and reports concerning the CSR reporting standards, environmental responsibilities of different kinds of entities, as well as own observations based on special reports of banks. In the article, also the analysis of financial market data, induction method and comparison method have been used. The main conclusions of the analysis of the CSR reports disclosed by the world’s largest banks confirm all three of the theses presented in the article. The findings suggest that the banks under study can be regarded as environmentally responsible

Modified section method for laser-welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks.

Science.gov (United States)

Tiossi, R; Falcão-Filho, H; Aguiar Júnior, F A; Rodrigues, R C; Mattos, M da G; Ribeiro, R F

2010-05-01

This study aimed to verify the effect of modified section method and laser-welding on the accuracy of fit of ill-fitting commercially pure titanium (cp Ti) and Ni-Cr alloy one-piece cast frameworks. Two sets of similar implant-supported frameworks were constructed. Both groups of six 3-unit implant-supported fixed partial dentures were cast as one-piece [I: Ni-Cr (control) and II: cp Ti] and evaluated for passive fitting in an optical microscope with both screws tightened and with only one screw tightened. All frameworks were then sectioned in the diagonal axis at the pontic region (III: Ni-Cr and IV: cp Ti). Sectioned frameworks were positioned in the matrix (10-Ncm torque) and laser-welded. Passive fitting was evaluated for the second time. Data were submitted to anova and Tukey-Kramer honestly significant difference tests (P screws tightened, one-piece cp Ti group II showed significantly higher misfit values (27.57 +/- 5.06 microm) than other groups (I: 11.19 +/- 2.54 microm, III: 12.88 +/- 2.93 microm, IV: 13.77 +/- 1.51 microm) (P screw-tightened test, with readings on the opposite side to the tightened side, Ni-Cr cast as one-piece (I: 58.66 +/- 14.30 microm) was significantly different from cp Ti group after diagonal section (IV: 27.51 +/- 8.28 microm) (P 0.05). Results showed that diagonally sectioning ill-fitting cp Ti frameworks lowers misfit levels of prosthetic implant-supported frameworks and also improves passivity levels of the same frameworks when compared to one-piece cast structures.

[Newborn ventilation: comparison between a T-piece resuscitator and self-infating bags in a neonatal preterm simulator].

Science.gov (United States)

Szyld, Edgardo G; Aguilar, Adriana M; Musante, Gabriel A; Vain, Néstor E; Guerrero, Miriam N; Serra, María Elina; Prudent, Luis M; Carlo, Waldemar A

2012-04-01

Although the provision of effective assisted ventilation is the most effective intervention in delivery room resuscitation of depressed newborn infants, there is still limited evidence about which is the optimal device to deliver positive pressure ventilation (PPV). To compare the accuracy of pressures and ventilation rate (VR) delivered to a neonatal simulator with three devices: 240 ml and 450 ml self-infating bags (SIB) and a T-piece resuscitator, and to evaluate the variability in terms of providers' experience. 76 health care providers divided in two groups according to experience were asked to provide positive pressure ventilation to a neonatal simulator through a facial mask or an endotracheal tube with three ventilating devices: a T-piece resuscitator, a 240 ml and a 450 ml self-infating bags. Participants used each combination of device and interface randomly on 2 consecutive occasions. Mean and maximum PIP and respiratory rate were recorded. Statistical analyses were performed using two-factor analysis of variance for repeated measures. SIB 240 and 450 were similar in the mean target peak inspiratory pressure (PIP) but both were significantly different (p values were close to the target. Mean VR was over the target for all the devices (p bag when compared with the T-piece using a mask. Experienced operators were closer than novice operators to target VR, regardless of the device or interface. The accuracy for the devices was comparable in the variables measured regardless operator´s experience. Overall, the T-piece provided lower PIP while both SIB, higher than the target. The VR was over the target for all the devices. Both SIB and novice participants were associated with higher VR. The intraoperator consistency was comparable in the variables measured with all devices.

Statistics of the largest sunspot and facular areas per solar cycle

International Nuclear Information System (INIS)

Willis, D.M.; Kabasakal Tulunay, Y.

1979-01-01

The statistics of extreme values is used to investigate the statistical properties of the largest areas sunspots and photospheric faculae per solar cycle. The largest values of the synodic-solar-rotation mean areas of umbrae, whole spots and faculae, which have been recorded for nine solar cycles, are each shown to comply with the general form of the extreme value probability function. Empirical expressions are derived for the three extreme value populations from which the characteristic statistical parameters, namely the mode, median, mean and standard deviation, can be calculated for each population. These three extreme value populations are also used to find the expected ranges of the extreme areas in a group of solar cycles as a function of the number of cycles in the group. The extreme areas of umbrae and whole spots have a dispersion comparable to that found by Siscoe for the extreme values of sunspot number, whereas the extreme areas of faculae have a smaller dispersion which is comparable to that found by Siscoe for the largest geomagnetic storm per solar cycle. The expected range of the largest sunspot area per solar cycle for a group of one hundred cycles appears to be inconsistent with the existence of the prolonged periods of sunspot minima that have been inferred from the historical information on solar variability. This inconsistency supports the contention that there are temporal changes of solar-cycle statistics during protracted periods of sunspot minima (or maxima). Indeed, without such temporal changes, photospheric faculae should have been continually observable throughout the lifetime of the Sun. (orig.)

Fishing down the largest coral reef fish species.

Science.gov (United States)

Fenner, Douglas

2014-07-15

Studies on remote, uninhabited, near-pristine reefs have revealed surprisingly large populations of large reef fish. Locations such as the northwestern Hawaiian Islands, northern Marianas Islands, Line Islands, U.S. remote Pacific Islands, Cocos-Keeling Atoll and Chagos archipelago have much higher reef fish biomass than islands and reefs near people. Much of the high biomass of most remote reef fish communities lies in the largest species, such as sharks, bumphead parrots, giant trevally, and humphead wrasse. Some, such as sharks and giant trevally, are apex predators, but others such as bumphead parrots and humphead wrasse, are not. At many locations, decreases in large reef fish species have been attributed to fishing. Fishing is well known to remove the largest fish first, and a quantitative measure of vulnerability to fishing indicates that large reef fish species are much more vulnerable to fishing than small fish. The removal of large reef fish by fishing parallels the extinction of terrestrial megafauna by early humans. However large reef fish have great value for various ecological roles and for reef tourism. Copyright © 2014 Elsevier Ltd. All rights reserved.

Design and analysis of the Collider SPXA/SPRA spool piece vacuum barrier

International Nuclear Information System (INIS)

Cruse, G.; Aksel, G.

1993-04-01

A design for the Collider SPXA/SPRA spool piece vacuum barrier was developed to meet a variety of thermal and structural performance requirements. Both composite and stainless steel alternatives were investigated using detailed finite-element analysis before selecting an optimized version of the ASST SPR spool vacuum barrier design. This design meets the structural requirements and will be able to meet the thermal performance requirements by using some newer thermal strapping configurations

The Multivariate Largest Lyapunov Exponent as an Age-Related Metric of Quiet Standing Balance

Directory of Open Access Journals (Sweden)

Kun Liu

2015-01-01

Full Text Available The largest Lyapunov exponent has been researched as a metric of the balance ability during human quiet standing. However, the sensitivity and accuracy of this measurement method are not good enough for clinical use. The present research proposes a metric of the human body’s standing balance ability based on the multivariate largest Lyapunov exponent which can quantify the human standing balance. The dynamic multivariate time series of ankle, knee, and hip were measured by multiple electrical goniometers. Thirty-six normal people of different ages participated in the test. With acquired data, the multivariate largest Lyapunov exponent was calculated. Finally, the results of the proposed approach were analysed and compared with the traditional method, for which the largest Lyapunov exponent and power spectral density from the centre of pressure were also calculated. The following conclusions can be obtained. The multivariate largest Lyapunov exponent has a higher degree of differentiation in differentiating balance in eyes-closed conditions. The MLLE value reflects the overall coordination between multisegment movements. Individuals of different ages can be distinguished by their MLLE values. The standing stability of human is reduced with the increment of age.

Crash testing the largest experiment on Earth

OpenAIRE

Cauchi, Marija

2015-01-01

Under Europe lies a 27 km tunnel that is both the coldest and hottest place on Earth. The Large Hadron Collider (LHC) has already found out what gives mass to all the matter in the Universe. It is now trying to go even deeper into what makes up everything we see around us. Dr Marija Cauchi writes about her research that helped protect this atom smasher from itself. Photography by Jean Claude Vancell. http://www.um.edu.mt/think/crash-testing-the-largest-experiment-on-earth/

Fitting the Pattern or being a dressmaker’s daughter: a memoir in pieces - Being Creatively Autobiographical in New Media

Directory of Open Access Journals (Sweden)

Christine Wilks

2009-07-01

Full Text Available Cutting through memories, pinning down facts, stitching up fabrications, unpicking the past - an interactive, animated memoir, created in Flash, exploring aspects of my relationship with my dressmaking mother and her complicated influence on me. Life’s mysteries are rarely uncovered by a logical, linear process of deduction. You arrive at answers, ideas, suspicions, intuitions… haphazardly in fragments. Over time you build the picture, piece by piece, shuffling and rearranging, until you start to see a pattern emerging. The structure of ‘Fitting the Pattern’ attempts to replicate this experience, hence it is a memoir in pieces that the reader can explore, to some extent, in a non-linear fashion. The visual design of the piece is based on the aesthetics of dressmaking patterns, specifically, imagery drawn from online open source sewing patterns (burdastyle.com. An affordance of such a design is that dressmaking patterns are instructional by nature so I was able to design an intuitive navigational system that provides signals and guidance to the user without breaking out of the narrative sphere and disrupting a potentially immersive experience. There are certain parallels between my motherʼs creative craft process and my own in new media. These similarities, as well as our differences, are embedded in the digital media and text, literally drawn out through animation and dramatised through interactivity. Custom cursors designed as digital dressmaking tools fuse the interactive process into the narrative world, so the reader becomes actively involved in constructing and/or unpicking the narrative. Like most of the interactive elements in ʻFitting the Patternʼ, these dressmaking tool symbols have multiple functions - they are navigation bar buttons; they are custom cursors; and they are active narrative elements, like animated characters, literally playing their part in the story whilst simultaneously activating the reading

Sand moulds milling for one-of-a-kind pieces

Science.gov (United States)

Rodríguez, A.; Calleja, A.; Olvera, D.; Peñafiel, F. J.; López de Lacalle, L. N.

2012-04-01

Time to market is a critical measurement for today's foundry market. Combining 3D digitizing and sand blocks milling is possible to reduce this time. Avoiding the use of a wood pattern, this technique is useful for art pieces or unique parts, when only one component is necessary. The key of the proposed methodology is to achieve enough tool life with conventional tool qualities, avoiding the risk of sand destruction or damage. A special study of tool wear is presented in this work, studying different tool materials and different sand types. Two examples of unique parts are also presented in this work following the proposed methodology in order to reduce time and cost for the rapid reproduction of very short batches.

Use of large pieces of printed circuit boards for bioleaching to avoid 'precipitate contamination problem' and to simplify overall metal recovery.

Science.gov (United States)

Adhapure, N N; Dhakephalkar, P K; Dhakephalkar, A P; Tembhurkar, V R; Rajgure, A V; Deshmukh, A M

2014-01-01

Very recently bioleaching has been used for removing metals from electronic waste. Most of the research has been targeted to using pulverized PCBs for bioleaching where precipitate formed during bioleaching contaminates the pulverized PCB sample and making the overall metal recovery process more complicated. In addition to that, such mixing of pulverized sample with precipitate also creates problems for the final separation of non metallic fraction of PCB sample. In the present investigation we attempted the use of large pieces of printed circuit boards instead of pulverized sample for removal of metals. Use of large pieces of PCBs for bioleaching was restricted due to the chemical coating present on PCBs, the problem has been solved by chemical treatment of PCBs prior to bioleaching. In short,•Large pieces of PCB can be used for bioleaching instead of pulverized PCB sample.•Metallic portion on PCBs can be made accessible to bacteria with prior chemical treatment of PCBs.•Complete metal removal obtained on PCB pieces of size 4 cm × 2.5 cm with the exception of solder traces. The final metal free PCBs (non metallic) can be easily recycled and in this way the overall recycling process (metallic and non metallic part) of PCBs becomes simple.

Telecommunications and internet broadband policy: sorting out the pieces for telerehabilitation.

Science.gov (United States)

Seelman, Katherine D

2010-01-01

Technological change is accelerating and with it regulatory upheaval. Most of us agree that providing universal telecommunication services to all our citizens is a worthy ideal. Nonetheless, many of us do not agree that regulation should be the means to make broadband Internet services widely available. This Viewpoint begins sorting out pieces of the emerging United States, regulatory and policy puzzle for broadband Internet with an eye to the interests of telerehabilitation providers and consumers. Just how might changes in legal authority, regulation and agency jurisdictions impact us?

Model Checking in Bits and Pieces

Directory of Open Access Journals (Sweden)

Kedar S. Namjoshi

2013-09-01

Full Text Available Fully automated verification of concurrent programs is a difficult problem, primarily because of state explosion: the exponential growth of a program state space with the number of its concurrently active components. It is natural to apply a divide and conquer strategy to ameliorate state explosion, by analyzing only a single component at a time. We show that this strategy leads to the notion of a "split" invariant, an assertion which is globally inductive, while being structured as the conjunction of a number of local, per-component invariants. This formulation is closely connected to the classical Owicki-Gries method and to Rely-Guarantee reasoning. We show how the division of an invariant into a number of pieces with limited scope makes it possible to apply new, localized forms of symmetry and abstraction to drastically simplify its computation. Split invariance also has interesting connections to parametric verification. A quantified invariant for a parametric system is a split invariant for every instance. We show how it is possible, in some cases, to invert this connection, and to automatically generalize from a split invariant for a small instance of a system to a quantified invariant which holds for the entire family of instances.

Predicting Traffic Flow in Local Area Networks by the Largest Lyapunov Exponent

Directory of Open Access Journals (Sweden)

Yan Liu

2016-01-01

Full Text Available The dynamics of network traffic are complex and nonlinear, and chaotic behaviors and their prediction, which play an important role in local area networks (LANs, are studied in detail, using the largest Lyapunov exponent. With the introduction of phase space reconstruction based on the time sequence, the high-dimensional traffic is projected onto the low dimension reconstructed phase space, and a reduced dynamic system is obtained from the dynamic system viewpoint. Then, a numerical method for computing the largest Lyapunov exponent of the low-dimensional dynamic system is presented. Further, the longest predictable time, which is related to chaotic behaviors in the system, is studied using the largest Lyapunov exponent, and the Wolf method is used to predict the evolution of the traffic in a local area network by both Dot and Interval predictions, and a reliable result is obtained by the presented method. As the conclusion, the results show that the largest Lyapunov exponent can be used to describe the sensitivity of the trajectory in the reconstructed phase space to the initial values. Moreover, Dot Prediction can effectively predict the flow burst. The numerical simulation also shows that the presented method is feasible and efficient for predicting the complex dynamic behaviors in LAN traffic, especially for congestion and attack in networks, which are the main two complex phenomena behaving as chaos in networks.

American College of Surgeons remains committed to patient safety.

Science.gov (United States)

Russell, Thomas R; Jones, R Scott

2006-11-01

Since 1913 the American College of Surgeons has addressed patient safety as a top priority, so they are pleased to contribute this article offering the College's perspective on this critical subject. More specifically, this piece reviews the College's perennial efforts to ensure surgeons and hospitals access to scientifically verifiable standards, availability of effective quality improvement tools, and a better understanding of errors in care. Additionally, they examine the cultural changes required within surgery and provide an overview of the College's recent initiatives in research, accreditation, and education.

Comparison of training in neonatal resuscitation using self inflating bag and T-piece resuscitator

Science.gov (United States)

Mathai, S.S.; Adhikari, K.M.; Rajeev, A.

2014-01-01

Background Both the self inflating bag and the T-piece resuscitator are recommended for neonatal resuscitation, but many health care workers are unfamiliar with using the latter. A prospective, comparative, observational study was done to determine the ease and effectiveness of training of health care personnel in the two devices using infant training manikins. Methods 100 health care workers, who had no prior formal training in neonatal resuscitation, were divided into small groups and trained in the use of the two devices by qualified trainers. Assessment of cognitive skills was done by pre and post MCQs. Psychomotor skill was assessed post training on manikins using a 10-point objective score. Acceptance by users was ascertained by questionnaire. Assessments were also done after 24 h and 3 months. Comparison was done by Chi square and paired t-tests. Results Pre-training cognitive tests increased from 3.77 (+1.58) to 6.99 (+1.28) on day of training which was significant. Post training assessment of psychomotor skills showed significantly higher initial scores for the T-piece group (7.07 + 2.57) on day of training. Reassessment after 24 h showed significant improvement in cognitive scores (9.89 + 1.24) and psychomotor scores in both groups (8.86 + 1.42 for self inflating bag and 9.70 + 0.57 for T-piece resuscitator). After 3–6 months the scores in both domains showed some decline which was not statistically significant. User acceptability was the same for both devices. Conclusion It is equally easy to train health care workers in both devices. Both groups showed good short term recall and both devices were equally acceptable to the users. PMID:25609858

Bacterial contamination of stethoscope chest pieces and the effect of daily cleaning.

Science.gov (United States)

Fujita, H; Hansen, B; Hanel, R

2013-01-01

Stethoscopes are a potential source of nosocomial infection for hospitalized humans, a phenomenon not previously studied in companion animals. To determine if daily cleaning of stethoscope chest pieces reduces bacterial contamination between cleanings. Client-owned dogs and cats. Prospective observational study. In phase 1, bacterial cultures were obtained from the chest pieces of 10 participant stethoscopes once weekly for 3 weeks. In phase 2, stethoscopes were cleaned daily and 2 culture samples were obtained once weekly, immediately before and after cleaning with 70% isopropyl alcohol, for 3 weeks. Daily cleaning eliminated bacteria immediately after each cleaning (P = .004), but did not reduce the rate of positive cultures obtained before cleaning in phase 2. Cultures were positive for 20/30 (67%) samples during phase 1 and 18/30 (60%) obtained before daily cleaning during phase 2. Recovered organisms included normal skin flora, agents of opportunistic infections, and potential pathogens. The only genus that was repeatedly recovered from the same stethoscope for 2 or more consecutive weeks was Bacillus sp. Daily cleaning was highly effective at removing bacteria, but provided no reduction in precleaning contamination. Cleaning stethoscopes after use on dogs or cats infected with pathogenic bacteria and before use on immunocompromised animals should be considered. Copyright © 2013 by the American College of Veterinary Internal Medicine.

Resolving the Aerosol Piece of the Global Climate Picture

Science.gov (United States)

Kahn, R. A.

2017-12-01

Factors affecting our ability to calculate climate forcing and estimate model predictive skill include direct radiative effects of aerosols and their indirect effects on clouds. Several decades of Earth-observing satellite observations have produced a global aerosol column-amount (AOD) record, but an aerosol microphysical property record required for climate and many air quality applications is lacking. Surface-based photometers offer qualitative aerosol-type classification, and several space-based instruments map aerosol air-mass types under favorable conditions. However, aerosol hygroscopicity, mass extinction efficiency (MEE), and quantitative light absorption, must be obtained from in situ measurements. Completing the aerosol piece of the climate picture requires three elements: (1) continuing global AOD and qualitative type mapping from space-based, multi-angle imagers and aerosol vertical distribution from near-source stereo imaging and downwind lidar, (2) systematic, quantitative in situ observations of particle properties unobtainable from space, and (3) continuing transport modeling to connect observations to sources, and extrapolate limited sampling in space and time. At present, the biggest challenges to producing the needed aerosol data record are: filling gaps in particle property observations, maintaining global observing capabilities, and putting the pieces together. Obtaining the PDFs of key particle properties, adequately sampled, is now the leading observational deficiency. One simplifying factor is that, for a given aerosol source and season, aerosol amounts often vary, but particle properties tend to be repeatable. SAM-CAAM (Systematic Aircraft Measurements to Characterize Aerosol Air Masses), a modest aircraft payload deployed frequently could fill this gap, adding value to the entire satellite data record, improving aerosol property assumptions in retrieval algorithms, and providing MEEs to translate between remote-sensing optical constraints

Lagisza, world's largest CFB boiler, begins commercial operation

Energy Technology Data Exchange (ETDEWEB)

Nuortimo, K. [Foster Wheeler, Varkaus (Finland)

2010-04-15

Early operating experience with the Lagisza circulating fluidised bed (CFB) boiler in Poland - the world's largest such boiler to date, and also the first one with supercritical steam conditions - has been positive. 3 figs., 4 tabs.

DNA typing from skeletal remains following an explosion in a military fort--first experience in Ecuador (South-America).

Science.gov (United States)

González-Andrade, Fabricio; Sánchez, Dora

2005-10-01

We present individual body identification efforts, to identify skeletal remains and relatives of missing persons of an explosion took place inside one of the munitions recesses of the Armoured Brigade of the Galapagos Armoured Cavalry, in the city of Riobamba, Ecuador, on Wednesday, November 20, 2002. Nineteen samples of bone remains and two tissue samples (a blood stain on a piece of fabric) from the zero zone were analysed. DNA extraction was made by Isoamilic Phenol-Chloroform-Alcohol, and proteinase K. We increased PCR cycles to identify DNA from bones to 35 cycles in some cases. An ABI 310 sequencer was used. Determination of the fragment size and the allelic designation of the different loci was carried out by comparison with the allelic ladders of the PowerPlex 16 kit and Gene Scan Analysis Software programme. Five possible family groups were established and were compared with the profiles found. Classical Bayesian methods were used to calculate the Likelihood Ratio and it was possible to identify five different genetic profiles in our country. This paper is important because is a novel experience for our forensic services, because this was the first time DNA had been used as an identification method in disasters, and it was validated by Ecuadorian justice like a very effective method.

Temporal properties of seismicity and largest earthquakes in SE Carpathians

Directory of Open Access Journals (Sweden)

S. Byrdina

2006-01-01

Full Text Available In order to estimate the hazard rate distribution of the largest seismic events in Vrancea, South-Eastern Carpathians, we study temporal properties of historical and instrumental catalogues of seismicity. First, on the basis of Generalized Extreme Value theory we estimate the average return period of the largest events. Then, following Bak et al. (2002 and Corral (2005a, we study scaling properties of recurrence times between earthquakes in appropriate spatial volumes. We come to the conclusion that the seismicity is temporally clustered, and that the distribution of recurrence times is significantly different from a Poisson process even for times largely exceeding corresponding periods of foreshock and aftershock activity. Modeling the recurrence times by a gamma distributed variable, we finally estimate hazard rates with respect to the time elapsed from the last large earthquake.

Using structures of the August 24, 2016 Amatrice earthquake affected area as seismoscopes for assessing ground motion characteristics and parameters of the main shock and its largest aftershocks

Science.gov (United States)

Carydis, Panayotis; Lekkas, Efthymios; Mavroulis, Spyridon

2017-04-01

On August 24, 2016 an Mw 6.0 earthquake struck Central Apennines (Italy) resulting in 299 fatalities, 388 injuries and about 3000 homeless in Amatrice wider area. Normal faulting surface ruptures along the western slope of Mt Vettore along with provided focal mechanisms demonstrated a NW-SE striking and SE dipping causative normal fault. The dominant building types in the affected area are unreinforced masonry (URM) and reinforced concrete (RC) buildings. Based on our macroseismic survey in the affected area immediately after the earthquake, RC buildings suffered non-structural damage including horizontal cracking of infill and internal partition walls, detachment of infill walls from the surrounding RC frame and detachment of large plaster pieces from infill walls as well as structural damage comprising soft story failure, symmetrical buckling of rods, compression damage at midheight of columns and bursting of over-stressed columns resulting in partial or total collapse. Damage in RC buildings was due to poor quality of concrete, inadequacy of reinforcement, inappropriate foundation close to the edge of slopes leading to differential settlements, poor workmanship and the destructive effect of vertical ground motions. Damage in URM buildings ranged from cracks and detachment of large plaster pieces from load-bearing walls to destruction due to poor workmanship with randomly placed materials bound by low-strength mortars, the effect of the vertical ground motion, inadequate repair and/or strengthening after previous earthquakes as well as inadequate interventions, additions and extensions to older URM buildings. During field surveying, the authors had the opportunity to observe damage induced not only by the main shock but also by its largest aftershocks (Mw 4.5-5.3) during the first three days of the aftershock sequence (August 24-26). Bearing in mind that: (a) soil conditions in foundations of the affected villages were more or less similar, (b) building damage

[Development of whole process quality control and management system of traditional Chinese medicine decoction pieces based on traditional Chinese medicine quality tree].

Science.gov (United States)

Yu, Wen-Kang; Dong, Ling; Pei, Wen-Xuan; Sun, Zhi-Rong; Dai, Jun-Dong; Wang, Yun

2017-12-01

The whole process quality control and management of traditional Chinese medicine (TCM) decoction pieces is a system engineering, involving the base environment, seeds and seedlings, harvesting, processing and other multiple steps, so the accurate identification of factors in TCM production process that may induce the quality risk, as well as reasonable quality control measures are very important. At present, the concept of quality risk is mainly concentrated in the aspects of management and regulations, etc. There is no comprehensive analysis on possible risks in the quality control process of TCM decoction pieces, or analysis summary of effective quality control schemes. A whole process quality control and management system for TCM decoction pieces based on TCM quality tree was proposed in this study. This system effectively combined the process analysis method of TCM quality tree with the quality risk management, and can help managers to make real-time decisions while realizing the whole process quality control of TCM. By providing personalized web interface, this system can realize user-oriented information feedback, and was convenient for users to predict, evaluate and control the quality of TCM. In the application process, the whole process quality control and management system of the TCM decoction pieces can identify the related quality factors such as base environment, cultivation and pieces processing, extend and modify the existing scientific workflow according to their own production conditions, and provide different enterprises with their own quality systems, to achieve the personalized service. As a new quality management model, this paper can provide reference for improving the quality of Chinese medicine production and quality standardization. Copyright© by the Chinese Pharmaceutical Association.

Use of large pieces of printed circuit boards for bioleaching to avoid ‘precipitate contamination problem’ and to simplify overall metal recovery

Science.gov (United States)

Adhapure, N.N.; Dhakephalkar, P.K.; Dhakephalkar, A.P.; Tembhurkar, V.R.; Rajgure, A.V.; Deshmukh, A.M.

2014-01-01

Very recently bioleaching has been used for removing metals from electronic waste. Most of the research has been targeted to using pulverized PCBs for bioleaching where precipitate formed during bioleaching contaminates the pulverized PCB sample and making the overall metal recovery process more complicated. In addition to that, such mixing of pulverized sample with precipitate also creates problems for the final separation of non metallic fraction of PCB sample. In the present investigation we attempted the use of large pieces of printed circuit boards instead of pulverized sample for removal of metals. Use of large pieces of PCBs for bioleaching was restricted due to the chemical coating present on PCBs, the problem has been solved by chemical treatment of PCBs prior to bioleaching. In short,•Large pieces of PCB can be used for bioleaching instead of pulverized PCB sample.•Metallic portion on PCBs can be made accessible to bacteria with prior chemical treatment of PCBs.•Complete metal removal obtained on PCB pieces of size 4 cm × 2.5 cm with the exception of solder traces. The final metal free PCBs (non metallic) can be easily recycled and in this way the overall recycling process (metallic and non metallic part) of PCBs becomes simple. PMID:26150951

Burning of MOX fuels in LWRs; fuel history effects on thermal properties of hull and end piece wastes and the repository performance

International Nuclear Information System (INIS)

Hirano, Fumio; Sato, Seichi; Kozaki, Tamotsu

2012-01-01

The thermal impacts of hull and end piece wastes from the reprocessing of MOX spent fuels burned in LWRs on repository performance were investigated. The heat generation rates in MOX spent fuels and the resulting heat generation rates in hull and end piece wastes change depending on the history of MOX fuels. This history includes the burn-up of UO 2 spent fuels from which the Pu is obtained, the cooling period before reprocessing, the storage period of fresh MOX fuels before being loaded into an LWR, as well as the burn-up of the MOX fuels. The heat generation rates in hull and end piece wastes from the reprocessing of MOX spent fuels with any of those histories are significantly larger than those from UO 2 spent fuels with burn-ups of 45 GWd/THM. If a temperature below 80degC is specified for cement-based materials used in waste packages after disposal, the allowable number of canisters containing compacted hull and end pieces in a package for 45 and 70 GWd-MOX needs to be limited to a value of 0.4-1.6, which is significantly lower than 4.0 for 45 GWd-UO 2 . (author)

PNNL supercomputer to become largest computing resource on the Grid

CERN Multimedia

2002-01-01

Hewlett Packard announced that the US DOE Pacific Northwest National Laboratory will connect a 9.3-teraflop HP supercomputer to the DOE Science Grid. This will be the largest supercomputer attached to a computer grid anywhere in the world (1 page).

Worlds largest particle physics laboratory selects Proxim Wireless Mesh

CERN Multimedia

2007-01-01

"Proxim Wireless has announced that the European Organization for Nuclear Research (CERN), the world's largest particle physics laboratory and the birthplace of the World Wide Web, is using it's ORiNOCO AP-4000 mesh access points to extend the range of the laboratory's Wi-Fi network and to provide continuous monitoring of the lab's calorimeters" (1/2 page)

Discovery of the largest orbweaving spider species: the evolution of gigantism in Nephila.

Science.gov (United States)

Kuntner, Matjaz; Coddington, Jonathan A

2009-10-21

More than 41,000 spider species are known with about 400-500 added each year, but for some well-known groups, such as the giant golden orbweavers, Nephila, the last valid described species dates from the 19(th) century. Nephila are renowned for being the largest web-spinning spiders, making the largest orb webs, and are model organisms for the study of extreme sexual size dimorphism (SSD) and sexual biology. Here, we report on the discovery of a new, giant Nephila species from Africa and Madagascar, and review size evolution and SSD in Nephilidae. We formally describe N. komaci sp. nov., the largest web spinning species known, and place the species in phylogenetic context to reconstruct the evolution of mean size (via squared change parsimony). We then test female and male mean size correlation using phylogenetically independent contrasts, and simulate nephilid body size evolution using Monte Carlo statistics. Nephila females increased in size almost monotonically to establish a mostly African clade of true giants. In contrast, Nephila male size is effectively decoupled and hovers around values roughly one fifth of female size. Although N. komaci females are the largest Nephila yet discovered, the males are also large and thus their SSD is not exceptional.

Discovery of the largest orbweaving spider species: the evolution of gigantism in Nephila.

Directory of Open Access Journals (Sweden)

Matjaz Kuntner

2009-10-01

Full Text Available More than 41,000 spider species are known with about 400-500 added each year, but for some well-known groups, such as the giant golden orbweavers, Nephila, the last valid described species dates from the 19(th century. Nephila are renowned for being the largest web-spinning spiders, making the largest orb webs, and are model organisms for the study of extreme sexual size dimorphism (SSD and sexual biology. Here, we report on the discovery of a new, giant Nephila species from Africa and Madagascar, and review size evolution and SSD in Nephilidae.We formally describe N. komaci sp. nov., the largest web spinning species known, and place the species in phylogenetic context to reconstruct the evolution of mean size (via squared change parsimony. We then test female and male mean size correlation using phylogenetically independent contrasts, and simulate nephilid body size evolution using Monte Carlo statistics.Nephila females increased in size almost monotonically to establish a mostly African clade of true giants. In contrast, Nephila male size is effectively decoupled and hovers around values roughly one fifth of female size. Although N. komaci females are the largest Nephila yet discovered, the males are also large and thus their SSD is not exceptional.

On the statistics of the largest geomagnetic storms per solar cycle

International Nuclear Information System (INIS)

Siscoe, G.L.

1976-01-01

The theory of extreme value statistics is applied to the first, second, and third largest geomagnetic storms in nine solar cycles measured by the average half-daily aa indices compiled by Mayaud. Analytic expressions giving the probability of the extremes per solar cycle as a contour function of storm magnitude are obtained by least squares fitting of the observations to the appropriate theoretical extreme value probability functions. The results are used to obtain the statistical characteristics (mode, median, mean, and standard deviation) for the extreme values. The results are applied to find the expected range of extreme values in a set as a function of the number of solar cycles in the set. We find that the expected range of the largest storm is quite narrow and is larger for the second and third largest storms. The observed range of the extreme half-daily aa index for the nine solar cycles is 354--546 γ. In a set of 100 cycles the range is expanded esentially to 311--680γ, an increase of only 39% in the range. The result supports the argument for a change in solar cycle statistics in the latter part of the Seventeenth Century (the Maunder minimum)

Large area spark chamber and support, and method of recording and analyzing the information on a radioactive work piece

International Nuclear Information System (INIS)

Britten, R.J.; Davidson, E.H.

1985-01-01

Novel large area spark chamber having a support for carrying a generally planar, radioactive work piece. The spark chamber has a thin window which is either a rigid plastic sheet carrying a thin layer of an electrically conductive material on the surface thereof, or a thin planar piece or film of electrically conductive metal. There is positioned in superposed relationship to the thin window, a layer of semi-conducting glass in spaced-apart relationship from the thin window by a resilient insulating seal to form an enclosed gas retaining chamber. An electrically conducting surface is adhered to the upper surface of the layer of semi-conducting glass. An electrically conductive path is provided between the thin layer of electrically conductive material on the thin window and the electrically conducting surface on said semi-conducting glass. The electrically conductive path includes a high voltage supply and TDCs and ADCs. There are also means for detecting the location of sites of impingement of radiation on the electrically conducting surface of the semi-conducting glass, and means for recording and analyzing the information present on the work piece

The Arrangement for My Funny Valentine by Marco Pereira: Leadsheet to Piece

Directory of Open Access Journals (Sweden)

Rafael Thomaz

2013-05-01

Full Text Available his article presents an analysis of the arrangement made by the Brazilian guitarist Marco Pereira for the American song My Funny Valentine in order to explore and understand the transformation of an open structured theme of a popular song into a closed structured piece for a solo instrument. For this purpose, a brief history of the hybridization of Brazilian music was outlined emphasizing solo guitar and an approach to the specific aspects and potential of using the leadsheet and conventional score.

Influence of remaining fission products in low-decontaminated fuel on reactor core characteristics

International Nuclear Information System (INIS)

Ohki, Shigeo

2002-07-01

Design study of core, fuel and related fuel cycle system with low-decontaminated fuel has been performed in the framework of the feasibility study (F/S) on commercialized fast reactor cycle systems. This report summarizes the influence on core characteristics of remaining fission products (FPs) in low-decontaminated fuel related to the reprocessing systems nominated in F/S phase I. For simple treatment of the remaining FPs in core neutronics calculation the representative nuclide method parameterized by the FP equivalent coefficient and the FP volume fraction was developed, which enabled an efficient evaluation procedure. As a result of the investigation on the sodium cooled fast reactor with MOX fuel designed in fiscal year 1999, it was found that the pyrochemical reprocessing with molten salt (the RIAR method) brought the largest influence. Nevertheless, it was still within the allowable range. Assuming an infinite-times recycling, the alternations in core characteristics were evaluated as follows: increment of burnup reactivity by 0.5%Δk/kk', decrement of breeding ratio by 0.04, increment of sodium void reactivity by 0.1x10 -2 Δk/kk' and decrement of Doppler constant (in absolute value) by 0.7x10 -3 Tdk/dT. (author)

Specific Features of Chip Making and Work-piece Surface Layer Formation in Machining Thermal Coatings

Directory of Open Access Journals (Sweden)

V. M. Yaroslavtsev

2016-01-01

Full Text Available A wide range of unique engineering structural and performance properties inherent in metallic composites characterizes wear- and erosion-resistant high-temperature coatings made by thermal spraying methods. This allows their use both in manufacturing processes to enhance the wear strength of products, which have to operate under the cyclic loading, high contact pressures, corrosion and high temperatures and in product renewal.Thermal coatings contribute to the qualitative improvement of the technical level of production and product restoration using the ceramic composite materials. However, the possibility to have a significantly increased product performance, reduce their factory labour hours and materials/output ratio in manufacturing and restoration is largely dependent on the degree of the surface layer quality of products at their finishing stage, which is usually provided by different kinds of machining.When machining the plasma-sprayed thermal coatings, a removing process of the cut-off layer material is determined by its distinctive features such as a layered structure, high internal stresses, low ductility material, high tendency to the surface layer strengthening and rehardening, porosity, high abrasive properties, etc. When coatings are machined these coating properties result in specific characteristics of chip formation and conditions for formation of the billet surface layer.The chip formation of plasma-sprayed coatings was studied at micro-velocities using an experimental tool-setting microscope-based setup, created in BMSTU. The setup allowed simultaneous recording both the individual stages (phases of the chip formation process and the operating force factors.It is found that formation of individual chip elements comes with the multiple micro-cracks that cause chipping-off the small particles of material. The emerging main crack in the cut-off layer of material leads to separation of the largest chip element. Then all the stages

Revisiting the phylogeny of Ocellularieae, the second largest tribe within Graphidaceae (lichenized Ascomycota: Ostropales)

Science.gov (United States)

Ekaphan Kraichak; Sittiporn Parnmen; Robert Lücking; Eimy Rivas Plata; Andre Aptroot; Marcela E.S. Caceres; Damien Ertz; Armin Mangold; Joel A. Mercado-Diaz; Khwanruan Papong; Dries Van der Broeck; Gothamie Weerakoon; H. Thorsten. Lumbsch; NO-VALUE

2014-01-01

We present an updated 3-locus molecular phylogeny of tribe Ocellularieae, the second largest tribe within subfamily Graphidoideae in the Graphidaceae. Adding 165 newly generated sequences from the mitochondrial small subunit rDNA (mtSSU), the nuclear large subunit rDNA (nuLSU), and the second largest subunit of the DNA-directed RNA polymerase II (RPB2), we currently...

Continuous sedation until death: moral justifications of physicians and nurses-a content analysis of opinion pieces

NARCIS (Netherlands)

Rys, S.; Mortier, F.; Deliens, L.; Deschepper, R.; Battin, M.P.; Bilsen, J.

2013-01-01

Continuous sedation until death (CSD), the act of reducing or removing the consciousness of an incurably ill patient until death, often provokes medical-ethical discussions in the opinion sections of medical and nursing journals. A content analysis of opinion pieces in medical and nursing literature

Scleral fixation of a single-piece multifocal intraocular lens.

Science.gov (United States)

Can, Ertugrul; Basaran, M Resat; Gül, Adem

2013-01-01

We describe an ab interno technique for injector implantation of a one-piece multifocal intraocular lens (IOL). Transscleral fixation of multifocal posterior chamber IOL implantation using an injector with ab interno technique was performed in an eye of a 9-year-old girl who had undergone pars plana lensectomy 2 years before for bilateral lens subluxation with unknown etiology. No major complications were encountered during a 3-month follow-up of the patient and excellent centration was observed during the follow-up period. Her preoperative best spectacle-corrected distance visual acuity of 20/32 improved to uncorrected distance visual acuity of 20/25. Closed-loop design of IOL served the function of eyelets and position of the IOL was provided using only a 2-point fixation. Intraoperative position adjustment of the IOL provided an excellent centralization of multifocal IOL.

Numerical Modeling of the Work Piece Region in the Plasma Arc Cutting Process

Science.gov (United States)

Osterhouse, David

The plasma arc cutting process is widely used for the cutting of metals. The process, however, is not fully understood and further understanding will lead to further improvements. This work aims to elucidate the fundamental physical phenomena in the region where the plasma interacts with the work piece through the use of numerical modeling techniques. This model follows standard computational fluid dynamic methods that have been suitably modified to include plasma effects, assuming either local thermodynamic equilibrium or a slight non-equilibrium captured by the two-temperature assumption. This is implemented in the general purpose, open source CFD package, OpenFOAM. The model is applied to a plasma flow through a geometry that extends from inside the plasma torch to the bottom of the slot cut in the work piece. The shape of the kerf is taken from experimental measurements. The results of this model include the temperature, velocity, and electrical current distribution throughout the plasma. From this, the heat flux to and drag force on the work piece are calculated. The location of the arc attachment in the cut slot is also noted because it is a matter of interest in the published literature as well as significantly effecting the dynamics of the heat flux and drag force. The results of this model show that the LTE formulation is not sufficient to capture the physics present due to unphysical fluid dynamic instabilities and numerical problems with the arc attachment. The two-temperature formulation, however, captures a large part of the physics present. Of particular note, it is found that an additional inelastic collision factor is necessary to describe the increased energy transfer between electrons and diatomic molecules, which is widely neglected in published literature. It is also found that inclusion of the oxygen molecular ion is necessary to accurately describe the plasma flow, which has been neglected in all published two-temperature oxygen calculations

CERN, World's largest particle physics lab, selects Progress SonicMQ

CERN Document Server

2007-01-01

"Progress Software Corporation (NADAQ: PRGS), a global supplier of application insfrastructure software used to develop, deploy, integrate and manage business applications, today announced that CERN the world's largest physis laboratory and particle accelerator, has chosen Progress® SonicMQ® for mission-critical message delivery." (1 page)

Synchrotron Emission on the Largest Scales: Radio Detection of the ...

Indian Academy of Sciences (India)

Abstract. Shocks and turbulence generated during large-scale structure formation are predicted to produce large-scale, low surface-brightness synchrotron emission. On the largest scales, this emission is globally correlated with the thermal baryon distribution, and constitutes the 'syn- chrotron cosmic-web'. I present the ...

Distribution of the Largest Eigenvalues of the Levi-Smirnov Ensemble

International Nuclear Information System (INIS)

Wieczorek, W.

2004-01-01

We calculate the distribution of the k-th largest eigenvalue in the random matrix Levi - Smirnov Ensemble (LSE), using the spectral dualism between LSE and chiral Gaussian Unitary Ensemble (GUE). Then we reconstruct universal spectral oscillations and we investigate an asymptotic behavior of the spectral distribution. (author)

OPTIMIZING THE PLACEMENT OF A WORK-PIECE AT A MULTI-POSITION ROTARY TABLE OF TRANSFER MACHINE WITH VERTICAL MULTI-SPINDLE HEAD

Directory of Open Access Journals (Sweden)

N. N. Guschinski

2015-01-01

Full Text Available The problem of minimizing the weight of transfer machine with a multi-position rotary table by placing of a work-piece at the table for processing of homogeneous batch of work-pieces is considered. To solve this problem the mathematical model and heuristic particle swarm optimization algorithm are proposed. The results of numerical experiments for two real problems of this type are given. The experiments revealed that the particle swarm optimization algorithm is more effective for the solution of the problem compared to the methods of random search and LP-search.

[Powder modification technology used for the preparation of the hydrophilic decoction pieces of indigo naturalis and the modification principle].

Science.gov (United States)

Zhang, Ding-Kun; Lin, Jun-Zhi; Liu, Jian-Yun; Qin, Chun-Feng; Guo, Zhi-Ping; Han, Li; Yang, Ming

2013-07-01

The hydrophilicity of the normal decoction pieces (NDP) of Indigo Naturalis is not good, therefore, it is not suit for decoctions. In this paper, powder modification technology is used and some NDP and alcohol are ground together in the vibromill to prepare the hydrophilic decoction pieces (HDP) of Indigo Naturalis. Initially, the properties of NDP, ultrafine decoction pieces (UDP) and HDP are compared, the hydrophilicity of UDP was promoted slightly, that of HDP is promoted dramatically. Then, three batches of Indigo Naturalis are prepared to HDP separately, but there is no obvious difference in the contact angle. Furthermore, the size distribution, surface area and micro-shape of HDP are bigger than that of UDP and smaller than NDP. The contents of indigo and indirubin in three decoction pieces are the same, as well as the species of inorganic substance, although there is a little difference in the proportion of five inorganic substances. The fact suggests the change of physical state and the qualitative and quantitative change of organism and inorganic substances are not the main factors to influence the hydrophilicity. In addition, hydroxyl, methylene and methyl can be identified at the wavenumber of 3 356 cm(-1) and 1 461 cm(-1) in infrared spectrum; the content of alcohol in HDP is 0.67% measured by gas chromatogram. The stability of HDP in the heating condition is studied, the fact suggests the hydrophilic effect of HDP at 40 degrees C is relatively stable. All above research suggests that the alcohol is the main factor to influence the hydrophilicity and maybe the intermolecular force which fixed alcohol molecule on the surface of Indigo Naturalis is the basic principle to produce the hydrophilicity.

Nuclear fundamentals remain

Directory of Open Access Journals (Sweden)

Stošić Zoran V.

2012-01-01

Full Text Available For Japan, the situation has become extremely difficult since counter-measures to deal with the nuclear accident had to be carried out along with dealing with the broader disaster caused by earthquake and the tsunami. In terms of damage, the Tohoku earthquake and the tsunami have caused the most fatalities and the largest economic loss ever from an earthquake and/or tsunami. The impact of this natural disaster is present not only in Japan but world-wide. The state of affairs in the global energy sector is affected by the consequences which may be lasting for decades. These effects are subject of this article dealing not with the nuclear accident at Fukushima Daiichi NPPs itself, but rather with the world-wide consequences and after effect on nuclear energy development. This includes: environmental damages, socio-economic effects, actions of safety authorities, extended protective measures against external events, the impact on global nuclear energy, triggered nuclear phase-outs and changes in new build plans as well as the sustainability of energy mix itself and an outlook.

Health insurance premium increases for the 5 largest school districts in the United States, 2004-2008.

Science.gov (United States)

Cantillo, John R

2010-03-01

Local school districts are often one of the largest, if not the largest, employers in their respective communities. Like many large employers, school districts offer health insurance to their employees. There is a lack of information about the rate of health insurance premiums in US school districts relative to other employers. To assess the change in the costs of healthcare insurance in the 5 largest public school districts in the United States, between 2004 and 2008, as representative of large public employers in the country. Data for this study were drawn exclusively from a survey sent to the 5 largest public school districts in the United States. The survey requested responses on 3 data elements for each benefit plan offered from 2004 through 2008; these included enrollment, employee costs, and employer costs. The premium growth for the 5 largest school districts has slowed down and is consistent with other purchasers-Kaiser/Health Research & Educational Trust and the Federal Employee Health Benefit Program. The average increase in health insurance premium for the schools was 5.9% in 2008, and the average annual growth rate over the study period was 7.5%. For family coverage, these schools provide the most generous employer contribution (80.8%) compared with the employer contribution reported by other employers (73.5%) for 2008. Often the largest employers in their communities, school districts demonstrate a commitment to provide choice of benefits and affordability for employees and their families. Despite constraints typical of public employers, the 5 largest school districts in the United States have decelerated in premium growth consistent with other purchasers, albeit at a slower pace.

Ways of Knowing and Types of Knowledge: How Do Students Approach a New Piece of Music?

Science.gov (United States)

dos Santos, Regina Antunes Teixeira; Gerling, Cristina Capparelli

2012-01-01

In an exploratory study lasting more than 16 weeks, 15 undergraduate and graduate piano students prepared a short piece by the Brazilian composer Guarnieri, "Ponteio" no. 22, without guidance from their piano teachers. The data that were collected included their performances, interviews pertaining to their practice and stimulated recall…

Cueing musical emotions: An empirical analysis of 24-piece sets by Bach and Chopin documents parallels with emotional speech

Directory of Open Access Journals (Sweden)

Matthew ePoon

2015-11-01

Full Text Available Acoustic cues such as pitch height and timing are effective at communicating emotion in both music and speech. Numerous experiments altering musical passages have shown that higher and faster melodies generally sound happier than lower and slower melodies, findings consistent with corpus analyses of emotional speech. However, equivalent corpus analyses of complex time-varying cues in music are less common, due in part to the challenges of assembling an appropriate corpus. Here we describe a novel, score-based exploration of the use of pitch height and timing in a set of balanced major and minor key compositions. Our corpus contained all 24 Preludes and 24 Fugues from Bach’s Well Tempered Clavier (book 1, as well as all 24 of Chopin’s Preludes for piano. These three sets are balanced with respect to both modality (major/minor and key chroma (A, B, C, etc.. Consistent with predictions derived from speech, we found major-key (nominally happy pieces to be two semitones higher in pitch height and 29% faster than minor-key (nominally sad pieces. This demonstrates that our balanced corpus of major and minor key pieces uses low-level acoustic cues for emotion in a manner consistent with speech. A series of post-hoc analyses illustrate interesting trade-offs, with

On Limitations of the Ultrasonic Characterization of Pieces Manufactured with Highly Attenuating Materials

Science.gov (United States)

Ramos, A.; Moreno, E.; Rubio, B.; Calas, H.; Galarza, N.; Rubio, J.; Diez, L.; Castellanos, L.; Gómez, T.

Some technical aspects of two Spanish cooperation projects, funded by DPI and Innpacto Programs of the R&D National Plan, are discussed. The objective is to analyze the common belief about than the ultrasonic testing in MHz range is not a tool utilizable to detect internal flaws in highly attenuating pieces made of coarse-grained steel. In fact high-strength steels, used in some safe industrial infrastructures of energy & transport sectors, are difficult to be inspected using the conventional "state of the art" in ultrasonic technology, due to their internal microstructures are very attenuating and coarse-grained. It is studied if this inspection difficulty could be overcome by finding intense interrogating pulses and advanced signal processing of the acquired echoes. A possible solution would depend on drastically improving signal-to-noise-ratios, by applying new advances on: ultrasonic transduction, HV electronics for intense pulsed driving of the testing probes, and an "ad-hoc" digital processing or focusing of the received noisy signals, in function of each material to be inspected. To attain this challenging aim on robust steel pieces would open the possibility of obtaining improvements in inspecting critical industrial components made of highly attenuating & dispersive materials, as new composites in aeronautic and motorway bridges, or new metallic alloys in nuclear area, where additional testing limitations often appear.

Discovery of the Largest Orbweaving Spider Species: The Evolution of Gigantism in Nephila

OpenAIRE

Kuntner, Matja?; Coddington, Jonathan A.

2009-01-01

Background More than 41,000 spider species are known with about 400?500 added each year, but for some well-known groups, such as the giant golden orbweavers, Nephila, the last valid described species dates from the 19th century. Nephila are renowned for being the largest web-spinning spiders, making the largest orb webs, and are model organisms for the study of extreme sexual size dimorphism (SSD) and sexual biology. Here, we report on the discovery of a new, giant Nephila species from Africa...

Case presentation of two maxillectomy patients restored with two-piece hollow bulb obturator retained using two different types of magnets

Directory of Open Access Journals (Sweden)

B Devi Parameswari

2017-01-01

Full Text Available Palatal defect can be repaired by reconstructive surgery and/or a dental prosthesis. We present prosthodontic rehabilitation of two partially edentulous patients, both with surgically induced palatal defect and explains how to achieve the goal for esthetics and phonetics. This also describes the fabrication of a hollow obturator by two piece method, which is simple and may be used as definitive obturator for maximum comfort of the patient. In both the above cases, since the mouth opening is restricted due to surgery, obturator prosthesis is given as two pieces retained with opposite poles of magnet, which facilitates the removal and insertion of the prosthesis.

Case Presentation of Two Maxillectomy Patients Restored with Two-piece Hollow Bulb Obturator Retained using Two Different Types of Magnets.

Science.gov (United States)

Parameswari, B Devi; Rajakumar, M; Jagadesaan, N; Annapoorni, H

2017-11-01

Palatal defect can be repaired by reconstructive surgery and/or a dental prosthesis. We present prosthodontic rehabilitation of two partially edentulous patients, both with surgically induced palatal defect and explains how to achieve the goal for esthetics and phonetics. This also describes the fabrication of a hollow obturator by two piece method, which is simple and may be used as definitive obturator for maximum comfort of the patient. In both the above cases, since the mouth opening is restricted due to surgery, obturator prosthesis is given as two pieces retained with opposite poles of magnet, which facilitates the removal and insertion of the prosthesis.

Study of Using Excess Stock to Reduce Naval Aviation Depot-Level Repairable Piece Part Backorders

Science.gov (United States)

2016-12-01

used to develop and run the comparison of the backorders and excess stock records. Python is chosen because of its ease of learning and use...sustainable source of bit-piece parts for future requisitions. 14. SUBJECT TERMS naval aviation AVDLRs, backorder, excess, DLA, WSS, FRC, Python ...SCHOOL December 2016 Approved by: Geraldo Ferrer Eddine Dahel Peter Ward Bryan Hudgens Academic Associate

THE CHALLENGE OF THE LARGEST STRUCTURES IN THE UNIVERSE TO COSMOLOGY

International Nuclear Information System (INIS)

Park, Changbom; Choi, Yun-Young; Kim, Sungsoo S.; Kim, Kap-Sung; Kim, Juhan; Gott III, J. Richard

2012-01-01

Large galaxy redshift surveys have long been used to constrain cosmological models and structure formation scenarios. In particular, the largest structures discovered observationally are thought to carry critical information on the amplitude of large-scale density fluctuations or homogeneity of the universe, and have often challenged the standard cosmological framework. The Sloan Great Wall (SGW) recently found in the Sloan Digital Sky Survey (SDSS) region casts doubt on the concordance cosmological model with a cosmological constant (i.e., the flat ΛCDM model). Here we show that the existence of the SGW is perfectly consistent with the ΛCDM model, a result that only our very large cosmological N-body simulation (the Horizon Run 2, HR2) could supply. In addition, we report on the discovery of a void complex in the SDSS much larger than the SGW, and show that such size of the largest void is also predicted in the ΛCDM paradigm. Our results demonstrate that an initially homogeneous isotropic universe with primordial Gaussian random phase density fluctuations growing in accordance with the general relativity can explain the richness and size of the observed large-scale structures in the SDSS. Using the HR2 simulation we predict that a future galaxy redshift survey about four times deeper or with 3 mag fainter limit than the SDSS should reveal a largest structure of bright galaxies about twice as big as the SGW.

Quality attributes and color characteristics in three-piece boneless hams.

Science.gov (United States)

McKeith, Russell O; Pringle, T Dean

2013-09-01

One hundred and fifty hams were selected on visual assessment of quality into normal (C) and two-tone (TT) groups. CIE LAB color and pH measurements were collected at the plant 48h postmortem on the gluteus medius (GM), gluteus profundus (GP), and rectus femoris (RF), and again at 72h on the semimembranosus (SM), biceps femoris (BF), semitendinosus (ST), and RF. Data were analyzed using GLM procedures of SAS, and correlations between color scores, pH, and drip loss were calculated. Plant and fabrication pH were lower (Phams compared with C. Muscles from TT hams had lower (Pcolor and pH are accurate predictors of pork quality attributes in the muscles of a three-piece boneless ham. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparison of thorough decontamination techniques on dismantled pieces of a PWR reactor

International Nuclear Information System (INIS)

Klein, M.; Rahier, A.; Mandoki, R.; Ponnet, M.

1998-01-01

The decontamination experience gained during the BR3 dismantling project is developed. This started with the full system decontamination of the primary loop and was followed by R and D on thorough decontamination projects. First, a wet abrasive installation has been installed and is now in operation for the thorough cleaning of metallic pieces of simple geometry. Afterwards, the chemical cerium process has been developed. The results of the regeneration with ozone and with electrochemistry are presented in detail. The ozone regeneration process has been selected for the industrial installation of which the construction is foreseen in 1998. (author)

Creep rupture of mild steel compact tension test pieces

International Nuclear Information System (INIS)

Priddle, E.K.

1978-10-01

Creep rupture lives have been determined for compact tension and unnotched tensile test pieces of mild steel at 450 0 C. Three sizes of compact tension specimens were used in which the ratios of reference stress to elastic stress intensity factor were 2.76, 4.78 and 6.6 (msup(-1/2)). The analysis of results in terms of either initial reference stress or stress intensity was unable to reduce the data to a single failure curve. An empirical correlation was found between rupture time and a reference stress/crack length combination where t = 2.46 x 10 20 sub(σref) sup(-8.96) asup(-1.56) (units hours, MPa and metres). This equation has no valid application to materials or specimens other than those from which it was derived. Reported data for 1/2Cr Mo V and 2 1/4Cr Mo steels at 565 0 C were also correlated by this approach. (author)

Mass balance of Greenland's three largest outlet glaciers - 2000–2010

NARCIS (Netherlands)

Howat, I.M.; Ahn, Y.; Joughin, I.; van den Broeke, M.R.; Lenaerts, J.T.M.; Smith, B.

2011-01-01

Acceleration of Greenland's three largest outlet glaciers, Helheim, Kangerdlugssuaq and Jakobshavn Isbræ, accounted for a substantial portion of the ice sheet's mass loss over the past decade. Rapid changes in their discharge, however, make their cumulative mass-change uncertain. We derive monthly

Time to Stop Holding the Elevator: A New Piece of the Transport Protein Mechanism Puzzle.

Science.gov (United States)

Vastermark, Ake; Saier, Milton H

2016-06-07

In this issue of Structure, McCoy et al. (2016) describe the 2.55-Å X-ray structure of the outward-facing occluded conformation of the Bacillus cereus maltose transporter MalT. This structure represents the penultimate piece needed to complete the picture of the transport cycle of the glucose superfamily of membrane-spanning EIIC components. Copyright © 2016 Elsevier Ltd. All rights reserved.

Visual function after implantation of single-piece toric hydrophilic acrylic intraocular lenses with hydrophobic surface six months after cataract surgery

Directory of Open Access Journals (Sweden)

Alja Črnej

2012-06-01

Conclusion: Patients with medium to high corneal astigmatism and implanted single-piece toric hydrophilic acrylic IOLs with hydrophobic surface have very good visual function six months postoperatively.

Joining the Pieces: Using Concept Maps for Integrated Learning and Assessment in an Introductory Management Course

Science.gov (United States)

Connolly, Heather; Spiller, Dorothy

2016-01-01

This paper reports on and evaluates the use of concept mapping as a learning tool in a large first year Management course. The goal was to help students make personal sense of course learning and to build their understanding of links and relationships between key course ideas. Concept mapping was used for three summative assessment pieces,…

Health Insurance Premium Increases for the 5 Largest School Districts in the United States, 2004–2008

Science.gov (United States)

Cantillo, John R.

2010-01-01

Background Local school districts are often one of the largest, if not the largest, employers in their respective communities. Like many large employers, school districts offer health insurance to their employees. There is a lack of information about the rate of health insurance premiums in US school districts relative to other employers. Objective To assess the change in the costs of healthcare insurance in the 5 largest public school districts in the United States, between 2004 and 2008, as representative of large public employers in the country. Methods Data for this study were drawn exclusively from a survey sent to the 5 largest public school districts in the United States. The survey requested responses on 3 data elements for each benefit plan offered from 2004 through 2008; these included enrollment, employee costs, and employer costs. Results The premium growth for the 5 largest school districts has slowed down and is consistent with other purchasers—Kaiser/Health Research & Educational Trust and the Federal Employee Health Benefit Program. The average increase in health insurance premium for the schools was 5.9% in 2008, and the average annual growth rate over the study period was 7.5%. For family coverage, these schools provide the most generous employer contribution (80.8%) compared with the employer contribution reported by other employers (73.5%) for 2008. Conclusions Often the largest employers in their communities, school districts demonstrate a commitment to provide choice of benefits and affordability for employees and their families. Despite constraints typical of public employers, the 5 largest school districts in the United States have decelerated in premium growth consistent with other purchasers, albeit at a slower pace. PMID:25126311

D-piece modifications of the hemiasterlin analog HTI-286 produce potent tubulin inhibitors.

Science.gov (United States)

Zask, Arie; Birnberg, Gary; Cheung, Katherine; Kaplan, Joshua; Niu, Chuan; Norton, Emily; Yamashita, Ayako; Beyer, Carl; Krishnamurthy, Girija; Greenberger, Lee M; Loganzo, Frank; Ayral-Kaloustian, Semiramis

2004-08-16

Modifications of the D-piece carboxylic acid group of the hemiasterlin analog HTI-286 gave tubulin inhibitors which were potent cytotoxic agents in taxol resistant cell lines expressing P-glycoprotein. Amides derived from proline had potency comparable to HTI-286. Reduction of the carboxylic acid to ketones and alcohols or its conversion to acidic heterocycles also gave potent analogs. Synthetic modifications of the carboxylic acid could be carried out selectively using a wide range of synthetic reagents. Proline analog 3 was found to be effective in a human xenograft model in athymic mice.

Exposure to texture of foods for 8-month-old infants : Does the size of the pieces matter?

NARCIS (Netherlands)

da Costa, Saakje P.; Remijn, Lianne; Weenen, Hugo; Vereijken, Carel; van der Schans, Cees

2017-01-01

This study examined the effect of meals varying in amount, size, and hardness of food pieces on the development of the chewing capabilities of 8-month-old infants. The study also examined changes in shivering, gagging, coughing, choking, and their ability to eat from a spoon. In an in-home setting

The largest glitch observed in the Crab pulsar

Science.gov (United States)

Shaw, B.; Lyne, A. G.; Stappers, B. W.; Weltevrede, P.; Bassa, C. G.; Lien, A. Y.; Mickaliger, M. B.; Breton, R. P.; Jordan, C. A.; Keith, M. J.; Krimm, H. A.

2018-05-01

We have observed a large glitch in the Crab pulsar (PSR B0531+21). The glitch occurred around MJD 58064 (2017 November 8) when the pulsar underwent an increase in the rotation rate of Δν = 1.530 × 10-5 Hz, corresponding to a fractional increase of Δν/ν = 0.516 × 10-6 making this event the largest glitch ever observed in this source. Due to our high-cadence and long-dwell time observations of the Crab pulsar we are able to partially resolve a fraction of the total spin-up of the star. This delayed spin-up occurred over a timescale of ˜1.7 days and is similar to the behaviour seen in the 1989 and 1996 large Crab pulsar glitches. The spin-down rate also increased at the glitch epoch by Δ \\dot{ν } / \\dot{ν } = 7 × 10^{-3}. In addition to being the largest such event observed in the Crab, the glitch occurred after the longest period of glitch inactivity since at least 1984 and we discuss a possible relationship between glitch size and waiting time. No changes to the shape of the pulse profile were observed near the glitch epoch at 610 MHz or 1520 MHz, nor did we identify any changes in the X-ray flux from the pulsar. The long-term recovery from the glitch continues to progress as \\dot{ν } slowly rises towards pre-glitch values. In line with other large Crab glitches, we expect there to be a persistent change to \\dot{ν }. We continue to monitor the long-term recovery with frequent, high quality observations.

Longevity in Calumma parsonii, the World's largest chameleon.

Science.gov (United States)

Tessa, Giulia; Glaw, Frank; Andreone, Franco

2017-03-01

Large body size of ectothermic species can be correlated with high life expectancy. We assessed the longevity of the World's largest chameleon, the Parson's chameleon Calumma parsonii from Madagascar by using skeletochronology of phalanges taken from preserved specimens held in European natural history museums. Due to the high bone resorption we can provide only the minimum age of each specimen. The highest minimum age detected was nine years for a male and eight years for a female, confirming that this species is considerably long living among chameleons. Our data also show a strong correlation between snout-vent length and estimated age. Copyright © 2017 Elsevier Inc. All rights reserved.

Simulation of double-seaming in a two-piece aluminum can

International Nuclear Information System (INIS)

Romanko, Anne; Berry, Dale; Fox, David

2004-01-01

The aluminum can industry in the United States and Canada manufactures over 100 billion cans per year. Two-piece aluminum cans are commonly used to seal and deliver foodstuffs such as soft drinks, beer, pet food, and other perishable items. In order to ensure product safety and performance, the double seam between the can body and lid is a critical component of the package. Double-seaming is a method by which the flange of the can body and the curl of the end are folded over together such that the final joint is composed of five metal thicknesses. There are a number of design challenges involved with the art of double seaming, especially with the push to lightweight. Although the requirements vary by product, the typical beer package must be able to hold pressures in excess of 90psi. In addition, in production, double seaming is a high-speed operation with speeds as high as 3000 cans/minute on an 18-spindle seamer. For this high volume, low cost industry, understanding and optimizing the seaming process can advance the industry as well as help prevent various manufacturing problems that produce a poor seal between the two pieces of the can.To aid in understanding the mechanics of the can parts during double-seaming, a simulation procedure was developed and carried out on a 202 diameter beverage can and lid. Simulations were run with the explicit dynamics solver ABAQUS/Explicit using the continuum shell element technology available in the ABAQUS general purpose FEA program. The continuum shell is a shear-deformable shell element with the topology of an eight node brick. The element's formulation allows continuously varying, solution-dependent shell thickness and through-thickness pinching stress. One important advantage of using the continuum shell as opposed to a traditional shell element is that true contact interactions at the top and bottom surfaces of the can body and lid can be accurately modeled. With a conventional shell element, contact is performed at the

Simulation of Double-Seaming in a Two-piece Aluminum Can

Science.gov (United States)

Romanko, Anne; Berry, Dale; Fox, David

2004-06-01

The aluminum can industry in the United States and Canada manufactures over 100 billion cans per year. Two-piece aluminum cans are commonly used to seal and deliver foodstuffs such as soft drinks, beer, pet food, and other perishable items. In order to ensure product safety and performance, the double seam between the can body and lid is a critical component of the package. Double-seaming is a method by which the flange of the can body and the curl of the end are folded over together such that the final joint is composed of five metal thicknesses. There are a number of design challenges involved with the art of double seaming, especially with the push to lightweight. Although the requirements vary by product, the typical beer package must be able to hold pressures in excess of 90psi. In addition, in production, double seaming is a high-speed operation with speeds as high as 3000 cans/minute on an 18-spindle seamer. For this high volume, low cost industry, understanding and optimizing the seaming process can advance the industry as well as help prevent various manufacturing problems that produce a poor seal between the two pieces of the can. To aid in understanding the mechanics of the can parts during double-seaming, a simulation procedure was developed and carried out on a 202 diameter beverage can and lid. Simulations were run with the explicit dynamics solver ABAQUS/Explicit using the continuum shell element technology available in the ABAQUS general purpose FEA program. The continuum shell is a shear-deformable shell element with the topology of an eight node brick. The element's formulation allows continuously varying, solution-dependent shell thickness and through-thickness pinching stress. One important advantage of using the continuum shell as opposed to a traditional shell element is that true contact interactions at the top and bottom surfaces of the can body and lid can be accurately modeled. With a conventional shell element, contact is performed at the

The RNA silencing pathway: the bits and pieces that matter.

Directory of Open Access Journals (Sweden)

2005-07-01

Full Text Available Cellular pathways are generally proposed on the basis of available experimental knowledge. The proposed pathways, however, may be inadequate to describe the phenomena they are supposed to explain. For instance, by means of concise mathematical models we are able to reveal shortcomings in the current description of the pathway of RNA silencing. The silencing pathway operates by cleaving siRNAs from dsRNA. siRNAs can associate with RISC, leading to the degradation of the target mRNA. We propose and analyze a few small extensions to the pathway: a siRNA degrading RNase, primed amplification of aberrant RNA pieces, and cooperation between aberrant RNA to trigger amplification. These extensions allow for a consistent explanation for various types of silencing phenomena, such as virus induced silencing, transgene and transposon induced silencing, and avoidance of self-reactivity, as well as for differences found between species groups.

Numerical Simulation of a Grinding Process Model for the Spatial Work-pieces: Development of Modeling Techniques

Directory of Open Access Journals (Sweden)

S. A. Voronov

2015-01-01

Full Text Available The article presents a literature review in simulation of grinding processes. It takes into consideration the statistical, energy based, and imitation approaches to simulation of grinding forces. Main stages of interaction between abrasive grains and machined surface are shown. The article describes main approaches to the geometry modeling of forming new surfaces when grinding. The review of approaches to the chip and pile up effect numerical modeling is shown. Advantages and disadvantages of grain-to-surface interaction by means of finite element method and molecular dynamics method are considered. The article points out that it is necessary to take into consideration the system dynamics and its effect on the finished surface. Structure of the complex imitation model of grinding process dynamics for flexible work-pieces with spatial surface geometry is proposed from the literature review. The proposed model of spatial grinding includes the model of work-piece dynamics, model of grinding wheel dynamics, phenomenological model of grinding forces based on 3D geometry modeling algorithm. Model gives the following results for spatial grinding process: vibration of machining part and grinding wheel, machined surface geometry, static deflection of the surface and grinding forces under various cutting conditions.

An investigation of red fox (Vulpes vulpes) and Eurasian badger (Meles meles) scavenging, scattering, and removal of deer remains: forensic implications and applications.

Science.gov (United States)

Young, Alexandria; Márquez-Grant, Nicholas; Stillman, Richard; Smith, Martin J; Korstjens, Amanda H

2015-01-01

Within northwest Europe, especially the United Kingdom, the red fox (Vulpes vulpes) and the Eurasian Badger (Meles meles) are the largest wild scavengers capable of modifying a set of remains through scavenging. Knowledge of region-specific and species-typical scavenging behaviors of scavengers within the crime scene area and surroundings can aid in more efficient and accurate interpretations. The scavenging behaviors of captive and wild foxes and badgers were recorded and compared through actualistic methods and direct observation. The scavenging by wild foxes and badgers of surface-deposited baits and whole deer (Cervus nippon; Capreolus capreolus) in a woodland was observed and analyzed. Wild foxes were found to scavenge deer more frequently than badgers. The scavenging of deer remains by foxes was also compared with forensic cases. The scavenging pattern and recovery distances of deer and human remains scavenged by foxes were similar but were potentially affected by the condition and deposition of a body, and the presence of clothing. © 2014 American Academy of Forensic Sciences.

Two-piece impression procedure for implant-retained orbital prostheses.

Science.gov (United States)

Ozcelik, Tuncer Burak; Yilmaz, Burak

2012-01-01

Obtaining an accurate impression of facial tissues with undercuts and extraoral implants has always been a challenge for both clinicians and patients. This report describes a three-step, two-piece technique that enables an accurate and comfortable impression of undercut tissues and extraoral implants in an orbital defect. An impression of the basal tissue surface of the defect area was made using a medium-body polyether impression material followed by an impression of the entire face of the patient made with a polyvinyl siloxane (PVS) impression material. First, the PVS impression material was removed; second, the impression posts were removed from the magnets; and third, the polyether impression was removed from the defect. The impression posts were attached to the implant analogs and placed in the negative spaces in the polyether impression. The polyether impression, which carries the implant analogs and impression posts, was placed in the PVS impression through the negative spaces. This technique minimizes trauma to the soft tissues and implants during impression making and also does not require additional materials.

Analytic approximation to the largest eigenvalue distribution of a white Wishart matrix

CSIR Research Space (South Africa)

Vlok, JD

2012-08-14

Full Text Available offers largely simplified computation and provides statistics such as the mean value and region of support of the largest eigenvalue distribution. Numeric results from the literature are compared with the approximation and Monte Carlo simulation results...

Sc2C2@D3h(14246)-C74: A Missing Piece of the Clusterfullerene Puzzle.

Science.gov (United States)

Wang, Yaofeng; Tang, Qiangqiang; Feng, Lai; Chen, Ning

2017-02-20

Clusterfullerenes with variable carbon cages have been extensively studied in recent years. However, despite all these efforts, C 74 cage-based clusterfullerene remains a missing piece of the puzzle. Herein, we show that single-crystal X-ray crystallographic analysis unambiguously assigns the previously reported dimetallofullerene Sc 2 @C 76 to a novel carbide clusterfullerene, Sc 2 C 2 @D 3h (14246)-C 74 , the first experimentally proven clusterfullerene with a C 74 cage. In addition, Sc 2 C 2 @D 3h (14246)-C 74 was charaterized by mass spectrometry, ultraviolet-visible-near-infrared absorption spectroscopy, 45 Sc nuclear magnetic resonance, and cyclic voltammetry. Comparative studies of the motion of the carbide cluster in Sc 2 C 2 @D 3h (14246)-C 74 and Sc 2 C 2 @C 2n (n = 40-44) revealed that a combination of factors, involving both the shape and size of the cage, is crucial in dictating the cluster motion. Moreover, structural studies of D 3h (14246)-C 74 revealed that it can be easily converted to C s (10528)-C 72 and T d (19151)-C 76 cages via C 2 desertion/insertion and Stone-Wales transformation. This suggests that D 3h (14246)-C 74 might play an important role in the growth pathway of clusterfullerenes.

UTILIZATION OF STEREOLOGY FOR QUANTITATIVE ANALYSIS OF PLASTIC DEFORMATION OF FORMING PIECES

Directory of Open Access Journals (Sweden)

Maroš Martinkovič

2012-01-01

Full Text Available Mechanical working leads to final properties of forming pieces, which are affected by conditions of production technology. Utilization of stereology leads to the detail analysis of three-dimensional plastic deformed material structure by different forming technologies, e.g. forging, extruding, upsetting, metal spinning, drawing etc. The microstructure of cold drawing wires was analyzed. Grain boundaries orientation was measured on the parallel section of wire with a different degree of deformation and direct axis plastic deformation was evaluated in bulk formed part. The strain of probes on their sections was obtained using stereology by measurement of degree of grain boundary orientation which was converted to deformation using model of conversion of grain boundary orientation degree to deformation.

Information Fields Navigation with Piece-Wise Polynomial Approximation for High-Performance OFDM in WSNs

Directory of Open Access Journals (Sweden)

Wei Wei

2013-01-01

Full Text Available Since Wireless sensor networks (WSNs are dramatically being arranged in mission-critical applications,it changes into necessary that we consider application requirements in Internet of Things. We try to use WSNs to assist information query and navigation within a practical parking spaces environment. Integrated with high-performance OFDM by piece-wise polynomial approximation, we present a new method that is based on a diffusion equation and a position equation to accomplish the navigation process conveniently and efficiently. From the point of view of theoretical analysis, our jobs hold the lower constraint condition and several inappropriate navigation can be amended. Information diffusion and potential field are introduced to reach the goal of accurate navigation and gradient descent method is applied in the algorithm. Formula derivations and simulations manifest that the method facilitates the solution of typical sensor network configuration information navigation. Concurrently, we also treat channel estimation and ICI mitigation for very high mobility OFDM systems, and the communication is between a BS and mobile target at a terrible scenario. The scheme proposed here combines the piece-wise polynomial expansion to approximate timevariations of multipath channels. Two near symbols are applied to estimate the first-and second-order parameters. So as to improve the estimation accuracy and mitigate the ICI caused by pilot-aided estimation, the multipath channel parameters were reestimated in timedomain employing the decided OFDM symbol. Simulation results show that this method would improve system performance in a complex environment.

A comparative study of two-piece ostomy appliances.

Science.gov (United States)

Welser, Marion; Riedlinger, Inge; Prause, Ulla

The quality of life of people with a stoma may be affected by peristomal skin disorders and by frequent unplanned changes of ostomy appliances due to problems with those appliances. The aim of this study was to evaluate two new, two-piece ostomy appliances with mechanical couplings (both from the SenSura range by Coloplast) and their ability to address areas that may be important to the quality of life of people with stomas, including appliance changes, stool seepage and overfilling. The study design featured two comparative, crossover, randomized multi-centre studies that were conducted in Germany. The SenSura appliances were evaluated against established reference appliances. Seventy-three individuals with a colostomy (closed-end appliances) and 75 individuals with an ileostomy (drainable appliances) participated in the studies. The participants tested 4-6 flanges of each type within a maximum period of two weeks. The results demonstrated that there was less seepage of stool observed under the SenSura flange when it was removed (pappliances. The SenSura flanges had better adhesion and flexibility and were easier to remove than the references (pappliances on quality of life indicators - there were fewer unplanned changes and less seepage of stool was observed in patients using the SenSura products.

Switzerland's largest wood-pellet factory in Balsthal

International Nuclear Information System (INIS)

Stohler, F.

2004-01-01

This article describes how a small Swiss electricity utility has broken out of its traditional role in power generation and the distribution of electricity and gone into the production of wood pellets. The pellets, which are made from waste wood (sawdust) available from wood processing companies, are produced on a large scale in one of Europe's largest pellets production facilities. The boom in the use of wood pellets for heating purposes is discussed. The article discusses this unusual approach for a Swiss power utility, which also operates a wood-fired power station and is even involved in an incineration plant for household wastes. The markets being aimed for in Switzerland and in Europe are described, including modern low-energy-consumption housing projects. A further project is described that is to use waste wood available from a large wood processing facility planned in the utility's own region

Tourism at Risk: Failures and Dichotomies of Risk Perception Theory in Tourism (Opinion Piece

Directory of Open Access Journals (Sweden)

Maximiliano E. KORSTANJE

2017-12-01

Full Text Available The turn of the century has brought a lot of radical shifts and risks for tourism industry, which ranged from terrorism to lethal virus outbreaks. Henceforth risk perception theory, which was formulated in psychology, was re-appropriated by policy makers and tourism-related scholars. However, from its inception this conceptual corpus was based on the economic-centred paradigm. This piece discusses critically the main limitations of risk perception theory and the rise of a new discipline, post disaster marketing, in view of the caveats and speculative assumption of “the precautionary principle”.

Modified snap-on attachment with ′O-ring′ for two piece hollow bulb obturator

Directory of Open Access Journals (Sweden)

C Gunasekar

2013-01-01

Full Text Available Restoration of near normal functions in patients who have been treated with hemimaxillectomy is generally difficult, in view of the restriction in mouth opening following healing of large surgical wound. Further, the extent and nature of the surgical defect differ from patient to patient. Thus, design of an obturator needs to be patient oriented. In this report, we describe a novel snap-on attachment with O-ring in a conventional two piece hollow bulb obturator for a 70-year-old male treated for carcinoma of the left maxilla and sinus.

Improved Nyquist Pulses Produced By A Filter with Senary Piece-wise Polynomial Frequency Characteristic

Directory of Open Access Journals (Sweden)

BALAN, A. L.

2014-05-01

Full Text Available A novel family of inter-symbol interference (ISI free pulses generated by improved Nyquist filters with a frequency characteristic composed of six parabolic pieces is proposed. We studied the performance of the new pulses in terms of the ISI error probability when the impulse response is sampled with a timing offset. To illustrate the achieved improvement, the new pulses are compared with other performing pulses that were reported in the literature. Simulation results show that comparable or enhanced ISI performance can be obtained at reasonable complexity.

Cueing musical emotions: An empirical analysis of 24-piece sets by Bach and Chopin documents parallels with emotional speech.

Science.gov (United States)

Poon, Matthew; Schutz, Michael

2015-01-01

Acoustic cues such as pitch height and timing are effective at communicating emotion in both music and speech. Numerous experiments altering musical passages have shown that higher and faster melodies generally sound "happier" than lower and slower melodies, findings consistent with corpus analyses of emotional speech. However, equivalent corpus analyses of complex time-varying cues in music are less common, due in part to the challenges of assembling an appropriate corpus. Here, we describe a novel, score-based exploration of the use of pitch height and timing in a set of "balanced" major and minor key compositions. Our analysis included all 24 Preludes and 24 Fugues from Bach's Well-Tempered Clavier (book 1), as well as all 24 of Chopin's Preludes for piano. These three sets are balanced with respect to both modality (major/minor) and key chroma ("A," "B," "C," etc.). Consistent with predictions derived from speech, we found major-key (nominally "happy") pieces to be two semitones higher in pitch height and 29% faster than minor-key (nominally "sad") pieces. This demonstrates that our balanced corpus of major and minor key pieces uses low-level acoustic cues for emotion in a manner consistent with speech. A series of post hoc analyses illustrate interesting trade-offs, with sets featuring greater emphasis on timing distinctions between modalities exhibiting the least pitch distinction, and vice-versa. We discuss these findings in the broader context of speech-music research, as well as recent scholarship exploring the historical evolution of cue use in Western music.

The global diversion of pharmaceutical drugs. India: the third largest illicit opium producer?

Science.gov (United States)

Paoli, Letizia; Greenfield, Victoria A; Charles, Molly; Reuter, Peter

2009-03-01

This paper explores India's role in the world illicit opiate market, particularly its role as a producer. India, a major illicit opiate consumer, is also the sole licensed exporter of raw opium: this unique status may be enabling substantial diversion to the illicit market. Participant observation and interviews were carried out at eight different sites. Information was also drawn from all standard secondary sources and the analysis of about 180 drug-related criminal proceedings reviewed by Indian High Courts and the Supreme Court from 1985 to 2001. Diversion from licit opium production takes place on such a large scale that India may be the third largest illicit opium producer after Afghanistan and Burma. With the possible exceptions of 2005 and 2006, 200-300 tons of India's opium may be diverted yearly. After estimating India's opiate consumption on the basis of UN-reported prevalence estimates, we find that diversion from licit production might have satisfied a quarter to more than a third of India's illicit opiate demand to 2004. India is not only among the world's largest consumer of illicit opiates but also one of the largest illicit opium producers. In contrast to all other illicit producers, India owes the latter distinction not to blatantly illicit cultivation but to diversion from licit cultivation. India's experience suggests the difficulty of preventing substantial leakage, even in a relatively well-governed nation.

BALU: Largest autoclave research facility in the world

Directory of Open Access Journals (Sweden)

Hakan Ucan

2016-03-01

Full Text Available Among the large-scale facilities operated at the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade BALU is the world's largest research autoclave. With a loading length of 20m and a loading diameter of 5.8 m the main objective of the facility is the optimization of the curing process operated by components made of carbon fiber on an industrial scale. For this reason, a novel dynamic autoclaving control has been developed that is characterized by peripheral devices to expend the performance of the facility for differential applications, by sensing systems to detect the component state throughout the curing process and by a feedback system, which is capable to intervene into the running autoclave process.

Oxygenation with T-piece versus self-inflating bag for ventilation of extremely preterm infants at birth: a randomized controlled trial.

LENUS (Irish Health Repository)

Dawson, Jennifer A

2011-06-01

To investigate whether infants < 29 weeks gestation who receive positive pressure ventilation (PPV) immediately after birth with a T-piece have higher oxygen saturation (SpO₂) measurements at 5 minutes than infants ventilated with a self inflating bag (SIB).

Viewpoint: Telecommunications and Internet Broadband Policy: Sorting Out the Pieces for Telerehabilitation

Directory of Open Access Journals (Sweden)

Kate D. Seelman

2010-09-01

Full Text Available Technological change is accelerating and with it regulatory upheaval.  Most of us agree that providing universal telecommunication services to all our citizens is a worthy ideal.  Nonetheless, many of us do not agree that regulation should be the means to make broadband Internet services widely available. This Viewpoint begins sorting out pieces of the emerging United States, regulatory and policy puzzle for broadband Internet with an eye to the interests of telerehabilitation providers and consumers. Just how might changes in legal authority, regulation and agency jurisdictions impact us?Key words: telecommunications regulation, telerehabilitation, Federal Communications Commission (FCC, Telecommunications Act of 1996, National Broadband Plan; Comcast vs. FCC; electronic health records (EHR; personal health records (PHR; health information technology (HIT, 

Application of the 2-piece orthodontic C-implant for provisional restoration with laser welded customized coping: a case report.

Science.gov (United States)

Paek, Janghyun; Ahn, Hyo-Won; Jeong, Do-Min; Shim, Jeong-Seok; Kim, Seong-Hun; Chung, Kyu-Rhim

2015-03-25

This article presents the application of laser welding technique to fabricate an orthodontic mini-implant provisional restoration in missing area after limited orthodontic treatment. A 15-year-old boy case is presented. Two-piece orthodontic C-implant was placed after regaining space for missing right mandibular central incisor. Due to angular deviation of implant, customized abutment was required. Ready-made head part was milled and lingual part of customized abutment was made with non-precious metal. Two parts then were laser welded (Master 1000, Elettrolaser Italy, Verona, Italy) and indirect lab composite (3 M ESPE Sinfony, St. Paul, MN, USA) was built up. The patient had successful result, confirmed by clinical and radiographic examinations. Before the patient is ready to get a permanent restoration later on, this provisional restoration will be used. This case shows that a two-piece orthodontic C-implant system can be used to maintain small edentulous space after orthodontic treatment.

Analytical modelling of Halbach linear generator incorporating pole shifting and piece-wise spring for ocean wave energy harvesting

Science.gov (United States)

Tan, Yimin; Lin, Kejian; Zu, Jean W.

2018-05-01

Halbach permanent magnet (PM) array has attracted tremendous research attention in the development of electromagnetic generators for its unique properties. This paper has proposed a generalized analytical model for linear generators. The slotted stator pole-shifting and implementation of Halbach array have been combined for the first time. Initially, the magnetization components of the Halbach array have been determined using Fourier decomposition. Then, based on the magnetic scalar potential method, the magnetic field distribution has been derived employing specially treated boundary conditions. FEM analysis has been conducted to verify the analytical model. A slotted linear PM generator with Halbach PM has been constructed to validate the model and further improved using piece-wise springs to trigger full range reciprocating motion. A dynamic model has been developed to characterize the dynamic behavior of the slider. This analytical method provides an effective tool in development and optimization of Halbach PM generator. The experimental results indicate that piece-wise springs can be employed to improve generator performance under low excitation frequency.

Analytical modelling of Halbach linear generator incorporating pole shifting and piece-wise spring for ocean wave energy harvesting

Directory of Open Access Journals (Sweden)

Yimin Tan

2018-05-01

Full Text Available Halbach permanent magnet (PM array has attracted tremendous research attention in the development of electromagnetic generators for its unique properties. This paper has proposed a generalized analytical model for linear generators. The slotted stator pole-shifting and implementation of Halbach array have been combined for the first time. Initially, the magnetization components of the Halbach array have been determined using Fourier decomposition. Then, based on the magnetic scalar potential method, the magnetic field distribution has been derived employing specially treated boundary conditions. FEM analysis has been conducted to verify the analytical model. A slotted linear PM generator with Halbach PM has been constructed to validate the model and further improved using piece-wise springs to trigger full range reciprocating motion. A dynamic model has been developed to characterize the dynamic behavior of the slider. This analytical method provides an effective tool in development and optimization of Halbach PM generator. The experimental results indicate that piece-wise springs can be employed to improve generator performance under low excitation frequency.

Effect of Ethanol Stress on Fermentation Performance of Saccharomyces cerevisiae Cells Immobilized on Nypa fruticans Leaf Sheath Pieces

Directory of Open Access Journals (Sweden)

Hoang Phong Nguyen

2015-01-01

Full Text Available The yeast cells of Saccharomyces cerevisiae immobilized on Nypa fruticans leaf sheath pieces were tested for ethanol tolerance (0, 23.7, 47.4, 71.0 and 94.7 g/L. Increase in the initial ethanol concentration from 23.7 to 94.7 g/L decreased the average growth rate and concentration of ethanol produced by the immobilized yeast by 5.2 and 4.1 times, respectively. However, in the medium with initial ethanol concentration of 94.7 g/L, the average growth rate, glucose uptake rate and ethanol formation rate of the immobilized yeast were 3.7, 2.5 and 3.5 times, respectively, higher than those of the free yeast. The ethanol stress inhibited ethanol formation by Saccharomyces cerevisiae cells and the yeast responded to the stress by changing the fatty acid composition of cellular membrane. The adsorption of yeast cells on Nypa fruticans leaf sheath pieces of the growth medium increased the saturated fatty acid (C16:0 and C18:0 mass fraction in the cellular membrane and that improved alcoholic fermentation performance of the immobilized yeast.

Canada's largest co-gen project

International Nuclear Information System (INIS)

Salaff, S.

2000-01-01

In November 2000, the TransAlta Energy Corp. began construction on its $400 million natural gas fuelled cogeneration project in Sarnia Ontario. The Sarnia Regional Cogeneration Project (SRCP) is designed to integrate a new 440 MW cogeneration facility to be built at the Sarnia Division of Dow Chemicals Canada Inc. with nearby existing generators totaling 210 MW at Dow and Bayer Inc. At 650 MW, the new facility will rank as Canada's largest cogeneration installation. Commercial operation is scheduled for October 2002. TransAlta owns three natural gas fuelled cogeneration facilities in Ontario (in Ottawa, Mississauga and Windsor) totaling 250 MW. The cost of electric power in Ontario is currently controlled by rising natural gas prices and the supply demand imbalance. This balance will be significantly affected by the possible return to service of 2000 MW of nuclear generating capacity. The SRCP project was announced just prior to the Ontario Energy Competition Act of October 1998 which committed the province to introduce competition to the electricity sector and which created major uncertainties in the electricity market. Some of the small, 25 MW projects which survived the market uncertainty included the Toronto-based Toromont Energy Ltd. project involving gas fuelled cogeneration and methane gas generation from landfill projects in Sudbury and Waterloo. It was emphasized that cogeneration and combined heat and power projects have significant environmental advantages over large combined cycle facilities. The Ontario Energy Board is currently considering an application from TransAlta to link the SRCP facility to Ontario's Hydro One Network Inc.'s transmission grid. 1 fig

Foreign exchange risk management : how are the largest non-financial companies in Norway managing their foreign exchange rate exposure?

OpenAIRE

Eriksen, Krister; Wedøe, Ola

2010-01-01

The purpose of this thesis is to investigate how the largest non-financial companies in Norway manage their foreign exchange rate exposure. This is investigated through the use of a survey distributed to a sample the largest non-financial firms in Norway. According to our results, the largest non-financial companies in Norway have a predefined strategy for managing foreign exchange risk, which is defined by the board of directors or by the management in the organisation. The companies’ mai...

New Chicago-Indiana computer network will handle dataflow from world's largest scientific experiment

CERN Multimedia

2006-01-01

"Massive quantities of data will soon begin flowing from the largest scientific instrument ever built into an international netword of computer centers, including one operated jointly by the University of Chicago and Indiana University." (1,5 page)

A new mask to prevent environmental contamination during radio aerosol mouth-piece inhalation procedures

International Nuclear Information System (INIS)

Braga, Francisco Jose Hossri Nogueira.

1994-01-01

Environmental contamination is frequent during labelled aerosol mouth-piece inhalation procedures. Previous personnel data showed that in 18/18 situations air background activity has increased after inhalation and this may create serious routine and economical problems. We have tested a new adherent mask made of 3 M's TEGADERM in sixty 99 m Tc-DTPA inhalation studies and the results indicates that the use of such a mask may eliminate the problem of environmental contamination. The device is useful but not entirely efficient in cases when good skin adherence cannot be obtained. 48 refs, 10 figs, 2 tabs

[Preliminary study on standardization of production and processing of Angelicae Sinensis Radix pieces].

Science.gov (United States)

Nie, Rui-Jie; Wang, Ying-Zi; Sun, Zhen-Yang; Wang, Si-Yu; Zhang, Jing-Zhen

2017-12-01

Study on the standardization of Chinese materia medica is an important action for modernization and globalization for traditional Chinese medicine. Standardization on the processing of Chinese herbal pieces is an important part in the study on standardization of Chinese materia medica, so it is of great significance to establish the technical processing standards of Angelicae Sinensis Radix pieces for improving its quality. In this study, single factor experiment was designed to optimize the softening, cutting and drying processes of Angelicae Sinensis Radix. With ferulic acid, Angelicae Sinensis Radix polysaccharide, volatile oil and extracts (water and ethanol) content as the quality index, the effects of different softening, cutting and drying processes on the contents of the five components in Angelicae Sinensis Radix were analyzed, and the normalized distance evaluation method was used to analyze the experimental data. The results showed that the content of five components in Angelicae Sinensis Radix was affected by different softening methods and drying temperature, but the thickness of slice had little effect on the content. The best preparation process for Angelicae Sinensis Radix was as follows: Non-medicinal parts were removed; mildewed and rot as well as moth-eaten parts were removed; washed by the flowing drinking water; stacked in the drug pool; moistening method was used for softening, where 125 mL water was sprayed for every 1 kg of herbs every 2.5 h; upper part of herbs covered with clean and moist cotton, and cut into thin slices (1-2 mm) after 15 h moistening until appropriate softness, with disk thickness of 1-2 cm, then received blast drying for 6 h at 55 ℃, and turned over for 2 times during the drying. Copyright© by the Chinese Pharmaceutical Association.

Design of single piece sabot for a single stage gas gun

Science.gov (United States)

Vemparala, Vignesh; Mathew, Arun Tom; Rao Koka, Tirumala

2017-11-01

Single piece sabot is a vital part in single stage gas guns for impact testing in aerospace industries. Depending on the type of projectile used the design of sabot varies to accommodate the testing equipment. The velocity of the projectile exiting the barrel is dependent on the material and shape of the sabot used. The material selected for the design of sabot is rigid polyurethane foam, due to their low elastic modulus and low density. Two samples of rigid PU foam is taken and tests are performed to get their exact material properties. These properties are incorporated in numerical simulation to determine the best fit for practical use. Since the PU foams has a wide range of porosity which plays a prominent role in deciding the exit velocity and accuracy of the projectile coming out of the barrel. By optimisation, to the best suitable material sample can be determined.

A novel computer-aided method to fabricate a custom one-piece glass fiber dowel-and-core based on digitized impression and crown preparation data.

Science.gov (United States)

Chen, Zhiyu; Li, Ya; Deng, Xuliang; Wang, Xinzhi

2014-06-01

Fiber-reinforced composite dowels have been widely used for their superior biomechanical properties; however, their preformed shape cannot fit irregularly shaped root canals. This study aimed to describe a novel computer-aided method to create a custom-made one-piece dowel-and-core based on the digitization of impressions and clinical standard crown preparations. A standard maxillary die stone model containing three prepared teeth each (maxillary lateral incisor, canine, premolar) requiring dowel restorations was made. It was then mounted on an average value articulator with the mandibular stone model to simulate natural occlusion. Impressions for each tooth were obtained using vinylpolysiloxane with a sectional dual-arch tray and digitized with an optical scanner. The dowel-and-core virtual model was created by slicing 3D dowel data from impression digitization with core data selected from a standard crown preparation database of 107 records collected from clinics and digitized. The position of the chosen digital core was manually regulated to coordinate with the adjacent teeth to fulfill the crown restorative requirements. Based on virtual models, one-piece custom dowel-and-cores for three experimental teeth were milled from a glass fiber block with computer-aided manufacturing techniques. Furthermore, two patients were treated to evaluate the practicality of this new method. The one-piece glass fiber dowel-and-core made for experimental teeth fulfilled the clinical requirements for dowel restorations. Moreover, two patients were treated to validate the technique. This novel computer-aided method to create a custom one-piece glass fiber dowel-and-core proved to be practical and efficient. © 2013 by the American College of Prosthodontists.

A welding device for a socket in a hard-to-get-to circular pipe connection piece

International Nuclear Information System (INIS)

Deschamps, J.P.

1995-01-01

The welding device allows for the assembly of a socket inside the collection piece of an auxiliary pipe at the bottom of a dissolver tube; the device comprises a support around which is mounted a rotating welding head with a gear motor. Clamping of the socket around the head is achieved by the means of pneumatically driven clamping sections. A pulley and gutter tension device is aimed at securing the electric and metal supply cables. 9 refs., 3 figs

Canada: The largest uranium producer

International Nuclear Information System (INIS)

Lowell, A.F.

1985-01-01

Despite all the current difficulties, previous erroneous forecasts and other mistakes, the longer term future looks good for uranium mining and for Canada's industry in particular. Saskatchewan continues to offer the most exciting new prospects, the huge and fabulously high grade Cigar Lake deposits being the most spectacular of the recent discoveries. Notwithstanding continuous mining for 30 years from Elliot Lake there still remain there significant uncommitted reserves which can be developed when the market for uranium is in better balance

Opportunities for biodiversity gains under the world’s largest reforestation programme

OpenAIRE

Hua, Fangyuan; Wang, Xiaoyang; Zheng, Xinlei; Fisher, Brendan; Wang, Lin; Zhu, Jianguo; Tang, Ya; Yu, Douglas W.; Wilcove, David S.

2016-01-01

Reforestation is a critical means of addressing the environmental and social problems of deforestation. China’s Grain-for-Green Program (GFGP) is the world’s largest reforestation scheme. Here we provide the first nationwide assessment of the tree composition of GFGP forests and the first combined ecological and economic study aimed at understanding GFGP’s biodiversity implications. Across China, GFGP forests are overwhelmingly monocultures or compositionally simple mixed forests. Focusing on...

Centering and alignment device of a fuel assembling under a heart upper sheet of a pressure water nuclear reactor and centering piece replacement process

International Nuclear Information System (INIS)

Bougis, J.C.

1994-01-01

The crossing opening of the heart upper sheet contains a central part and two end parts of which diameter is higher than the central part one. The centering piece contains a head putting down, thanks to a support part, on a retaining of the opening, a centering and positioning smooth part and a threaded part. The device also contains a nut screwed on the threaded part of the centering piece so far as to come supporting on a retaining of the opening. The nut is made not unscrewed thanks to a stopping washer soldered inside the end part of the crossing opening. (Author). 3 figs., 5 refs

Cohabitants' perspective on housing adaptations: a piece of the puzzle.

Science.gov (United States)

Granbom, Marianne; Taei, Afsaneh; Ekstam, Lisa

2017-12-01

As part of the Swedish state-funded healthcare system, housing adaptations are used to promote safe and independent living for disabled people in ordinary housing through the elimination of physical environmental barriers in the home. The aim of this study was to describe the cohabitants' expectations and experiences of how a housing adaptation, intended for the partner, would impact their everyday life. In-depth interviews were conducted with cohabitants of nine people applying for a housing adaptation, initially at the time of the application and then again 3 months after the housing adaptation was installed. A longitudinal analysis was performed including analysis procedures from Grounded Theory. The findings revealed the expectations and experiences in four categories: partners' activities and independence; cohabitants' everyday activities and caregiving; couples' shared recreational/leisure activities; and housing decisions. A core category putting the intervention into perspective was called 'Housing adaptations - A piece of the puzzle'. From the cohabitants' perspective, new insights on housing adaptations emerged, which are important to consider when planning and carrying out successful housing adaptations. © 2017 Nordic College of Caring Science.

Rehabilitation of the 6 largest hydropower plants in the Republic of Macedonia

International Nuclear Information System (INIS)

Chingoski, Vlatko; Savevski, Vasil

2004-01-01

In 1998, ESM (Electric Power Co. of Macedonia) received a loan from the International Bank for Reconstruction and Development (IBRD - The World bank) for the cost of the Power System Improvement Project, major part of which is the partial rehabilitation of the six largest HPPs in the Republic of Macedonia. Rehabilitation and life extension of these six largest hydro power plants is given the highest priority in the whole Power System Improvement Project mainly because these HPPs are, in general, fairly old, older than most of the thermal generation capacity and because a significant part of their equipment is wearing out, or is now obsolete with spare parts difficult to obtain. Furthermore, these plants play a vital role in the Macedonian Power System, providing peaking capacity, reserve capacity and frequency control. With the realization of this project, greater hydropower production is expected. It is also expected that HPPs will become a more vital part of the Macedonian Power System, which is also beneficial from an environmental aspect, due to greater usage of renewable energy resources in the country. (Original)

[PALEOPATHOLOGY OF HUMAN REMAINS].

Science.gov (United States)

Minozzi, Simona; Fornaciari, Gino

2015-01-01

Many diseases induce alterations in the human skeleton, leaving traces of their presence in ancient remains. Paleopathological examination of human remains not only allows the study of the history and evolution of the disease, but also the reconstruction of health conditions in the past populations. This paper describes the most interesting diseases observed in skeletal samples from the Roman Imperial Age necropoles found in urban and suburban areas of Rome during archaeological excavations in the last decades. The diseases observed were grouped into the following categories: articular diseases, traumas, infections, metabolic or nutritional diseases, congenital diseases and tumours, and some examples are reported for each group. Although extensive epidemiological investigation in ancient skeletal records is impossible, the palaeopathological study allowed to highlight the spread of numerous illnesses, many of which can be related to the life and health conditions of the Roman population.

Impact of Fruit Piece Structure in Yogurts on the Dynamics of Aroma Release and Sensory Perception

Directory of Open Access Journals (Sweden)

Isabelle Souchon

2013-05-01

Full Text Available The aim of this work was to gain insight into the effect of food formulation on aroma release and perception, both of which playing an important role in food appreciation. The quality and quantity of retronasal aroma released during food consumption affect the exposure time of olfactory receptors to aroma stimuli, which can influence nutritional and hedonic characteristics, as well as consumption behaviors. In yogurts, fruit preparation formulation can be a key factor to modulate aroma stimulation. In this context, the impact of size and hardness of fruit pieces in fat-free pear yogurts was studied. Proton Transfer Reaction-Mass Spectrometry (PTR-MS was used to allow sensitive and on-line monitoring of volatile odorous compound release in the breath during consumption. In parallel, a trained panel used sensory profile and Temporal Dominance of Sensations (TDS methods to characterize yogurt sensory properties and their dynamic changes during consumption. Results showed that the size of pear pieces had few effects on aroma release and perception of yogurts, whereas fruit hardness significantly influenced them. Despite the fact that yogurts presented short and similar residence times in the mouth, this study showed that fruit preparation could be an interesting formulation factor to enhance exposure time to stimuli and thus modify food consumption behaviors. These results could be taken into account to formulate new products that integrate both nutritional and sensory criteria.

Ownership, financing, and management strategies of the ten largest for-profit nursing home chains in the United States.

Science.gov (United States)

Harrington, Charlene; Hauser, Clarilee; Olney, Brian; Rosenau, Pauline Vaillancourt

2011-01-01

This study examined the ownership, financing, and management strategies of the 10 largest for-profit nursing home chains in the United States, including the four largest chains purchased by private equity corporations. Descriptive data were collected from Internet searches, company reports, and other sources for the decade 1998-2008. Since 1998, the largest chains have made many changes in their ownership and structure, and some have converted from publicly traded companies to private ownership. This study shows the increasing complexity of corporate nursing home ownership and the lack of public information about ownership and financial status. The chains have used strategies to maximize shareholder and investor value that include increasing Medicare revenues, occupancy rates, and company diversification, establishing multiple layers of corporate ownership, developing real estate investment trusts, and creating limited liability companies. These strategies enhance shareholder and investor profits, reduce corporate taxes, and reduce liability risk. There is a need for greater transparency in ownership and financial reporting and for more government oversight of the largest for-profit chains, including those owned by private equity companies.

A case of radiation enteritis with perforated peritonitis caused by a piece of eggshell

International Nuclear Information System (INIS)

Kitamura, Hirotaka; Maeda, Kazuya; Miyanaga, Tamonn; Doden, Kenji; Hattori, Masakazu; Hashizume, Yasuo

2011-01-01

The patient was a woman in her sixties who had received radiation therapy for cancer of uterine cervix 7 years earlier and had been suffering from diarrhea for these several years. The patient was seen at our emergency clinic because of a 5 hour-history of lower abdominal pain at the beginning of July 2010. An abdominal CT scan showed free air and ascites. A high density structure 1.5 cm in size was identified within the small intestine, but its relation with the perforation was obscure. Emergency operation was done with the most likely diagnosis of intestinal perforation and general peritonitis. When the lower abdomen was opened by midline incision, about 200 ml of cloudy ascites was observed and the ileum became white in color and hard resulting from the radiation therapy. A perforation was identified in the ileum about 15 cm distant from the ileocecal valve, and a 1.5-cm sized thin and hard material was palpated within the intestine at the same portion. Ilececal resection including the perforated portion was performed and functional end-to-end anastomosis was made at a grossly normal area. There was a piece of eggshell 1.5-cm in size in the perforated portion in the resected specimen. From this together with histopathologial findings, perforation of the small intestine caused by a piece of eggshell associated with radiation enteritis was finally diagnosed. Small bowel perforation must be kept in mind as a possible late complication of radiation therapy, however, no cases of small bowel perforation caused by eggshell have been reported so far. This rare case is reported here, with a review of the literature. (author)

SSC RIAR is the largest centre of research reactors

International Nuclear Information System (INIS)

Kalygin, V.V.

1997-01-01

The State Scientific Centre (SSC) ''Research Institute of Atomic Reactors'' (RIAR) is situated 100 km to the south-east from Moscow, in Dimitrovgrad, the Volga Region of the Russian Federation. SSC RIAR is the largest centre of research reactors in Russia. At present there are 5 types of reactor facilities in operation, including two NPP. One of the main tasks the Centre is the investigations on safety increase for power reactors. Broad international connections are available at the Institute. On the basis of the SSC RIAR during 3 years work has been done on the development of the branch training centre (TC) for the training of operation personnel of research and pilot reactors in Russia. (author). 3 tabs

SSC RIAR is the largest centre of research reactors

Energy Technology Data Exchange (ETDEWEB)

Kalygin, V V [State Scientific Centre, Research Inst. of Atomic Reactors (Russian Federation)

1997-10-01

The State Scientific Centre (SSC) ``Research Institute of Atomic Reactors`` (RIAR) is situated 100 km to the south-east from Moscow, in Dimitrovgrad, the Volga Region of the Russian Federation. SSC RIAR is the largest centre of research reactors in Russia. At present there are 5 types of reactor facilities in operation, including two NPP. One of the main tasks the Centre is the investigations on safety increase for power reactors. Broad international connections are available at the Institute. On the basis of the SSC RIAR during 3 years work has been done on the development of the branch training centre (TC) for the training of operation personnel of research and pilot reactors in Russia. (author). 3 tabs.

Hospital Prices Increase in California, Especially Among Hospitals in the Largest Multi-hospital Systems

Directory of Open Access Journals (Sweden)

Glenn A. Melnick PhD

2016-06-01

Full Text Available A surge in hospital consolidation is fueling formation of ever larger multi-hospital systems throughout the United States. This article examines hospital prices in California over time with a focus on hospitals in the largest multi-hospital systems. Our data show that hospital prices in California grew substantially (+76% per hospital admission across all hospitals and all services between 2004 and 2013 and that prices at hospitals that are members of the largest, multi-hospital systems grew substantially more (113% than prices paid to all other California hospitals (70%. Prices were similar in both groups at the start of the period (approximately $9200 per admission. By the end of the period, prices at hospitals in the largest systems exceeded prices at other California hospitals by almost $4000 per patient admission. Our study findings are potentially useful to policy makers across the country for several reasons. Our data measure actual prices for a large sample of hospitals over a long period of time in California. California experienced its wave of consolidation much earlier than the rest of the country and as such our findings may provide some insights into what may happen across the United States from hospital consolidation including growth of large, multi-hospital systems now forming in the rest of the rest of the country.

A marine heatwave drives massive losses from the world’s largest seagrass carbon stocks

KAUST Repository

Arias-Ortiz, Ariane; Serrano, Oscar; Masqué , Pere; Lavery, P. S.; Mueller, U.; Kendrick, G. A.; Rozaimi, M.; Esteban, A.; Fourqurean, J. W.; Marbà , N.; Mateo, M. A.; Murray, K.; Rule, M. J.; Duarte, Carlos M.

2018-01-01

Seagrass ecosystems contain globally significant organic carbon (C) stocks. However, climate change and increasing frequency of extreme events threaten their preservation. Shark Bay, Western Australia, has the largest C stock reported for a seagrass

HIV risks and HIV prevention among female sex workers in two largest urban settings in Croatia, 2008-2014.

Science.gov (United States)

Štulhofer, Aleksandar; Landripet, Ivan; Božić, Jasmina; Božičević, Ivana

2015-01-01

Harm reduction-based HIV prevention has been in place among female sex workers (FSWs) in Croatia for more than a decade. However, little is known about how well the existing programs meet the needs of FSWs in an environment where sex work remains criminalized and highly stigmatized. This study aims to assess changes in FSWs' vulnerability to HIV infection in the 2008-2014 period. Using convenience samples of FSWs in Croatia's two largest urban settings, behavioral data were collected in 2007-2008 and 2014. Outreach workers interviewed 154 FSWs in the first wave of the survey and 158 in the second. The period under observation was characterized by a stable prevalence of most HIV-relevant risk behaviors and experiences. Significant changes in client-based victimization and HIV knowledge were observed only among FSWs in the capital city. Substantial and mostly sustained levels of sexual and nonsexual victimization call for more research into the limits of the current behavior-based harm reduction approach to HIV prevention in the country.

Structural Optimization of an Offshore Wind Turbines Transition Pieces for Bucket Foundations

DEFF Research Database (Denmark)

Nezhentseva, Anastasia; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

Traditionally, offshore constructions are made of steel. The focus of this paper is optimization of a transition piece (TP) connecting the offshore wind turbine column with a suction bucket foundation. Suction caissons, typically used for shallow water depths, have been proved to be adequate...... in residual soil conditions for depths up to approximately 40 m. The existing design practice is limited to the use of steel-flange-reinforced shear panels. Desirable outcome is proposal of an alternative material which does not require extensive welding work. Compact reinforced composite (CRC) is suggested...... curved segments have been introduced between the conical part and the tubular parts of the structure. While the minimum amount of steel and concrete was required for the composite CRC–steel shell model, the pure CRC model appeared to be the least sensitive to geometrical imperfections, corresponding...

The largest Silurian vertebrate and its palaeoecological implications

Science.gov (United States)

Choo, Brian; Zhu, Min; Zhao, Wenjin; Jia, Liaotao; Zhu, You'an

2014-01-01

An apparent absence of Silurian fishes more than half-a-metre in length has been viewed as evidence that gnathostomes were restricted in size and diversity prior to the Devonian. Here we describe the largest pre-Devonian vertebrate (Megamastax amblyodus gen. et sp. nov.), a predatory marine osteichthyan from the Silurian Kuanti Formation (late Ludlow, ~423 million years ago) of Yunnan, China, with an estimated length of about 1 meter. The unusual dentition of the new form suggests a durophagous diet which, combined with its large size, indicates a considerable degree of trophic specialisation among early osteichthyans. The lack of large Silurian vertebrates has recently been used as constraint in palaeoatmospheric modelling, with purported lower oxygen levels imposing a physiological size limit. Regardless of the exact causal relationship between oxygen availability and evolutionary success, this finding refutes the assumption that pre-Emsian vertebrates were restricted to small body sizes. PMID:24921626

THE MASS OF (4) VESTA DERIVED FROM ITS LARGEST GRAVITATIONAL EFFECTS

International Nuclear Information System (INIS)

Kuzmanoski, Mike; Novakovic, Bojan; Apostolovska, Gordana

2010-01-01

In this paper, we present a recalculated value of the mass of (4) Vesta, derived from its largest gravitational perturbations on selected asteroids during their mutual close encounters. This was done by using a new method for mass determination, which is based on the linking of pre-encounter observations to the orbit determined from post-encounter ones. The estimated weighted mean of the mass of (4) Vesta is (1.300 ± 0.001) x 10 -10 M sun .

Printed thermoplastic modular piece, P.T.M.P. = Piezas termoplásticas modulares, P.T.M.P.

Directory of Open Access Journals (Sweden)

Sandra Moyano Sanz

2018-04-01

Full Text Available This research tries to design a modular part suitable for construction, with new materials and manufacturing processes. Polymers and 3D printing are the key elements in the process. It is about implanting a new model of modular part that is able to replace the conventional brick. With this research, we want to make known the new construction processes derived from 3D printing and how we can improve the existing technology. The main objective is to design a modular part, using additive manufacturing systems and plastic materials. Then we are going to determine the physical characteristics that the pieces must have, and the geometric possibilities that the manufacturing process allows us, as well as the materials that the pieces will be made. These pieces will be subject to all the actual tests to ceramic pieces, according to the current standard. Additionally, we will analyze the results obtained and compare them with an expensive ceramic brick to assess the advantages obtained. Finally, we will determine some conclusions derived from these investigations, and propose new study proposals. With this research, we intend to demonstrate that, although conventional brick are basic elements of construction and fulfils its functions perfectly, it is time to adapt the new technologies to the constructive methods. Resumen Este estudio trata de diseñar una pieza modular apropiada para la construcción mediante nuevos procesos de producción y nuevos materiales. Los polímeros y la impresión 3D son los elementos clave del proceso. Además, se estudia implantar un nuevo modelo de pieza modular que sea capaz de sustituir al ladrillo convencional. Con esta investigación queremos divulgar los nuevos procesos asociados a la impresión 3D y como podemos mejorar la tecnología existente. El objetivo principal es diseñar una pieza modular, usando sistemas de fabricación aditiva y materiales plásticos. Posteriormente vamos a determinar las características f

Dynamic (2, 3) Threshold Quantum Secret Sharing of Secure Direct Communication

International Nuclear Information System (INIS)

Lai Hong; Xiao Jing-Hua; Mehmet, Orgun A.; Josef, Pieprzyk; Xue Li-Yin

2015-01-01

In this paper, we show that a (2, 3) discrete variable threshold quantum secret sharing scheme of secure direct communication can be achieved based on recurrence using the same devices as in BB84. The scheme is devised by first placing the shares of smaller secret pieces into the shares of the largest secret piece, converting the shares of the largest secret piece into corresponding quantum state sequences, inserting nonorthogonal state particles into the quantum state sequences with the purpose of detecting eavesdropping, and finally sending the new quantum state sequences to the three participants respectively. Consequently, every particle can on average carry up to 1.5-bit messages due to the use of recurrence. The control codes are randomly prepared using the way to generate fountain codes with pre-shared source codes between Alice and Bob, making three participants can detect eavesdropping by themselves without sending classical messages to Alice. Due to the flexible encoding, our scheme is also dynamic, which means that it allows the participants to join and leave freely. (paper)

A new and simple extraction technique for rectal foreign bodies: removing by cutting into small pieces

OpenAIRE

Abbas Aras; Mehmet Karabulut; Osman Kones; Kaplan Baha Temizgonul; Halil Alis

2014-01-01

The purposes of insertion and types of foreign bodies in rectum show great variation. Rectal foreign bodies need to be removed without giving damage to intestinal wall and this should be done in the easiest possible way. We have reported a new and a simple technique. It is easy to apply and safe. A patient was admitted to our clinic with a rectal foreign body (radish) which was successfully removed by cutting it into small pieces. We conclude that different kinds of rectal foreign bodies, esp...

Key U.S.-built part fails during testing for world's largest particle collider

CERN Multimedia

2007-01-01

"Scientists are scrambling to redesign a key U.S.-built part that broke "with a loud bang and a cloud of dust" during a high-pressure test for the world's largest particle physics collider that is supposed to start up in November, officials sais Tuesday." (1,5 page)

New pieces of the Trichinella puzzle

Science.gov (United States)

Contrary to our understanding of just a few decades ago, the genus Trichinella now consists of a complex assemblage of no less than 9 different species and 3 additional genotypes whose taxonomic status remains in flux. New data and methodologies have allowed advancements in detection and differentia...

Coast Guard: Progress Being Made on Deepwater Project, but Risks Remain

National Research Council Canada - National Science Library

2001-01-01

The Coast Guard is in the final stages of planning the largest procurement project in its history the modernization and/or replacement of over 90 cutters and 200 aircraft used for missions beyond 50 miles from shore...

Low level radioactive waste management in New York State all the pieces of the puzzle, but

International Nuclear Information System (INIS)

Gerber, C.A.

1995-01-01

Unlike many other states and compacts, New York not only has a volunteer community, but that community has over three thousand acres of state owned land that was intended for commercial nuclear use. A poll conducted by the Siting Commission indicates that the citizens of New York understand the need for a central monitored disposal facility for LLRW. Hundreds of widely dispersed storage sites are unacceptable to the majority of New Yorkers. New York State has a law requiring the siting and construction of a facility for the permanent disposal of LLRW. The regulations are in place and the Siting Commission has gone through the siting process forward, and should be about finished doing it backwards as the amended state law required. The State Health Department has authorized a $800,000 contract to the National Academy of Science to review the process. The representatives of the Cortland County opponents went on record and already stated that the NAS Study is unacceptable. After fifty million dollars the results are catastrophic. The generators in the state will be forced to store their waste because of the failure by the state to obey it's own law. According to the law, the facility was to be in operation no later than January 1, 1993. While New York State has all the pieces of the LLRW management puzzle on the table, there are many people with political and social agendas ready to knock the pieces onto the floor

Procedure for the qualification of a manufacturer of ingot iron pieces for application in nuclear power plant components

International Nuclear Information System (INIS)

Rahn, K.M.M.; Jusevicius, E.; Michael, H.

1981-01-01

The process for the qualification of 'Sao Caetano do Sul (Acos Villares S/A)' Plant as manufacturers of ingot iron pieces for application in components of Angra 2 and Angra 3 Nuclear Power Plants, is presented. The qualification was executed by IBQN - Instituto Brasileiro de Qualidade Nuclear - the organ officially in charge of the execution of qualification of suppliers of materials for the nuclear industry. (E.G.) [pt

A Randomised Controlled Trial of the Use of a Piece of Commercial Software for the Acquisition of Reading Skills

Science.gov (United States)

Khan, Muhammad Ahmad; Gorard, Stephen

2012-01-01

We report here the overall results of a cluster randomised controlled trial of the use of computer-aided instruction with 672 Year 7 pupils in 23 secondary school classes in the north of England. A new piece of commercial software, claimed on the basis of publisher testing to be effective in improving reading after just six weeks of use in the…

Constraining the magnitude of the largest event in a foreshock-main shock-aftershock sequence

Science.gov (United States)

Shcherbakov, Robert; Zhuang, Jiancang; Ogata, Yosihiko

2018-01-01

Extreme value statistics and Bayesian methods are used to constrain the magnitudes of the largest expected earthquakes in a sequence governed by the parametric time-dependent occurrence rate and frequency-magnitude statistics. The Bayesian predictive distribution for the magnitude of the largest event in a sequence is derived. Two types of sequences are considered, that is, the classical aftershock sequences generated by large main shocks and the aftershocks generated by large foreshocks preceding a main shock. For the former sequences, the early aftershocks during a training time interval are used to constrain the magnitude of the future extreme event during the forecasting time interval. For the latter sequences, the earthquakes preceding the main shock are used to constrain the magnitudes of the subsequent extreme events including the main shock. The analysis is applied retrospectively to past prominent earthquake sequences.

Evolution of the Largest Mammalian Genome.

Science.gov (United States)

Evans, Ben J; Upham, Nathan S; Golding, Goeffrey B; Ojeda, Ricardo A; Ojeda, Agustina A

2017-06-01

The genome of the red vizcacha rat (Rodentia, Octodontidae, Tympanoctomys barrerae) is the largest of all mammals, and about double the size of their close relative, the mountain vizcacha rat Octomys mimax, even though the lineages that gave rise to these species diverged from each other only about 5 Ma. The mechanism for this rapid genome expansion is controversial, and hypothesized to be a consequence of whole genome duplication or accumulation of repetitive elements. To test these alternative but nonexclusive hypotheses, we gathered and evaluated evidence from whole transcriptome and whole genome sequences of T. barrerae and O. mimax. We recovered support for genome expansion due to accumulation of a diverse assemblage of repetitive elements, which represent about one half and one fifth of the genomes of T. barrerae and O. mimax, respectively, but we found no strong signal of whole genome duplication. In both species, repetitive sequences were rare in transcribed regions as compared with the rest of the genome, and mostly had no close match to annotated repetitive sequences from other rodents. These findings raise new questions about the genomic dynamics of these repetitive elements, their connection to widespread chromosomal fissions that occurred in the T. barrerae ancestor, and their fitness effects-including during the evolution of hypersaline dietary tolerance in T. barrerae. ©The Author(s) 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Largest US oil and gas fields, August 1993

Energy Technology Data Exchange (ETDEWEB)

1993-08-06

The Largest US Oil and Gas Fields is a technical report and part of an Energy Information Administration (EIA) series presenting distributions of US crude oil and natural gas resources, developed using field-level data collected by EIA`s annual survey of oil and gas proved reserves. The series` objective is to provide useful information beyond that routinely presented in the EIA annual report on crude oil and natural gas reserves. These special reports also will provide oil and gas resource analysts with a fuller understanding of the nature of US crude oil and natural gas occurrence, both at the macro level and with respect to the specific subjects addressed. The series` approach is to integrate EIA`s crude oil and natural gas survey data with related data obtained from other authoritative sources, and then to present illustrations and analyses of interest to a broad spectrum of energy information users ranging from the general public to oil and gas industry personnel.

Largest US oil and gas fields, August 1993

International Nuclear Information System (INIS)

1993-01-01

The Largest US Oil and Gas Fields is a technical report and part of an Energy Information Administration (EIA) series presenting distributions of US crude oil and natural gas resources, developed using field-level data collected by EIA's annual survey of oil and gas proved reserves. The series' objective is to provide useful information beyond that routinely presented in the EIA annual report on crude oil and natural gas reserves. These special reports also will provide oil and gas resource analysts with a fuller understanding of the nature of US crude oil and natural gas occurrence, both at the macro level and with respect to the specific subjects addressed. The series' approach is to integrate EIA's crude oil and natural gas survey data with related data obtained from other authoritative sources, and then to present illustrations and analyses of interest to a broad spectrum of energy information users ranging from the general public to oil and gas industry personnel

Personalism in the Lublin School of Philosophy (Card. Karol Wojtyła, Fr. Mieczysław A. Krąpiec

Directory of Open Access Journals (Sweden)

Tomasz Duma

2016-06-01

Full Text Available The article presents the conception of personalism and the understanding of human person developed by two Polish philosophers: Karol Wojtyła and Mieczysław A. Krąpiec, the framers and the main representatives of the Lublin School of Philosophy. The author comes to the following conclusions: (1 Wojtyła’s and Krąpiec’s conception of personalism comes from experience and seeks verification in experience; it does not accept any a priori explanations or theses, though it does not shy away from drawing upon different branches of knowledge in its attempts to broaden experience, being aware that not everything is given to immediate experiential perception; (2 Wojtyła’s and Krąpiec’s personalism wants to draw on the whole philosophical tradition, taking into account, at the same time, the findings of different sciences of man or humanities which broaden the experience of man or contribute something to the interpretation of experience; (3 bringing together genetic empiricism and methodical rationalism, Wojtyła and Krąpiec are able to avoid radicalism in the explanation of man, making a successful attempt to join in a complementary way these aspects of personal human being which carry some opposition; (4 Wojtyła’s and Krąpiec’s conception of person does not bear any traces of antagonism since it is not directed against anyone; in the light of this conception every human person has a character of the honest good which is the unconditional good, that is the highest and the ultimate good not competing with the value of anything else; (5 Wojtyła and Krąpiec prove that the conception of human person lies at the basis of understanding society, culture, ethics, law, politics, economy, art, and even religion.

How the largest electric and gas utility companies administer public relations

Energy Technology Data Exchange (ETDEWEB)

Bogart, J.D.

1979-04-12

This article describes the findings of a survey conducted by the author in the second half of 1978 to determine the sizes of the public relations staffs of the nation's largest operating electric and gas utilities, their budgets, organizational differences, and specific functions. Common public relations issues and major public relations problems of the utilities are identified, as well as recent trends or changes in budgeting and organization. Some functional variations of public relations departments among utility companies were detected and described.

Immediate loading of mandibular overdentures supported by one-piece, direct metal laser sintering mini-implants: a short-term prospective clinical study.

Science.gov (United States)

Mangano, Francesco G; Caprioglio, Alberto; Levrini, Luca; Farronato, Davide; Zecca, Piero A; Mangano, Carlo

2015-02-01

Only a few studies have dealt with immediately loaded, unsplinted mini-implants supporting ball attachment-retained mandibular overdentures (ODs). The aim of this study is to evaluate treatment outcomes of ball attachment-retained mandibular ODs supported by one-piece, unsplinted, immediately loaded, direct metal laser sintering (DMLS) mini-implants. Over a 4-year period (2009 to 2012), all patients referred to the Dental Clinic, University of Varese, and to a private practice for treatment with mandibular ODs were considered for inclusion in this study. Each patient received three or four DMLS mini-implants. Immediately after implant placement, a mandibular OD was connected to the implants. At each annual follow-up session, clinical and radiographic parameters were assessed, including the following outcome measures: 1) implant failures; 2) peri-implant marginal bone loss; and 3) complications. Statistical analysis was conducted using a life-table analysis. A total of 231 one-piece DMLS mini-implants were inserted in 62 patients. After 4 years of loading, six implants failed, giving an overall cumulative survival rate of 96.9%. The mean distance between the implant shoulder and the first visible bone-to-implant contact was 0.38 ± 0.25 and 0.62 ± 0.20 mm at the 1- and 4-year follow-up examinations, respectively. An incidence of 6.0% of biologic complications was reported; prosthetic complications were more frequent (12.9%). Within the limits of this study, it can be concluded that the immediate loading of one-piece, unsplinted, DMLS titanium mini-implants by means of ball attachment-supported mandibular ODs is a successful treatment procedure. Long-term follow-up studies are needed to confirm these results.

Environmental isotope signatures of the largest freshwater lake in Kerala

International Nuclear Information System (INIS)

Unnikrishnan Warrier, C.

2007-01-01

Sasthamkotta lake, the largest freshwater lake in Kerala, serves as a source for drinking water for more than half a million people. Environmental 137 Cs analysis done on undisturbed sediment core samples reveals that the recent rate of sedimentation is not uniform in the lake. The useful life of lake is estimated as about 800 years. The δD and δ 18 O values of the lake waters indicate that the lake is well mixed with a slight variation horizontally. The stable isotope studies on well waters from the catchment indicate hydraulic communication with the lake and lake groundwater system is flow-through type. Analytical model also supports this view. (author)

CERN: Digital image analysis in the world's largest research center for particle physics

CERN Multimedia

2005-01-01

Those interested in researching into the smallest building blocks that matter is made up of need the largest instruments. CERN, near Geneva, Switzerland is where the most powerful circular accelerator in the world is being built: the Large Hadron Collider (LHC) for proton collisions. It has a circumference of 26.7 km (4 pages)

Oromaxillary Prosthetic Rehabilitation of a Maxillectomy Patient Using a Magnet Retained Two-Piece Hollow Bulb Definitive Obturator; A Clinical Report

Science.gov (United States)

Mohamed Usman, Jafar Abdulla; Ayappan, Anuroopa; Ganapathy, Dhanraj; Nasir, Nilofer Nisha

2013-01-01

Resection of a malignant lesion involving the maxilla produces severe oromaxillary defect that can seriously jeopardize the normal phonetics of the patient. These defects are effectively managed by well-designed and fabricated obturator. This paper discusses the oromaxillary prosthetic rehabilitation of a maxillectomy patient using a magnet retained two-piece hollow bulb definitive obturator. PMID:23533823

Oromaxillary Prosthetic Rehabilitation of a Maxillectomy Patient Using a Magnet Retained Two-Piece Hollow Bulb Definitive Obturator; A Clinical Report

Directory of Open Access Journals (Sweden)

Jafar Abdulla Mohamed Usman

2013-01-01

Full Text Available Resection of a malignant lesion involving the maxilla produces severe oromaxillary defect that can seriously jeopardize the normal phonetics of the patient. These defects are effectively managed by well-designed and fabricated obturator. This paper discusses the oromaxillary prosthetic rehabilitation of a maxillectomy patient using a magnet retained two-piece hollow bulb definitive obturator.

Evidence on the coherence-pieces debate from the force concept inventory

Science.gov (United States)

Badagnani, D.; Petrucci, D.; Cappannini, O.

2018-01-01

We use force concept inventory (FCI) data to probe the consistency of commonsense physics as a knowledge system. The source of this data is the administration of the FCI to first-year science university students. Data quality was checked using item response theory and studying answer distributions for each question. We find apparently paradoxical results: depending on how the data is analysed, answers seem highly systematic or almost random-like. These results are compatible with others found in the literature and can be construed as arising either from a coherent knowledge system or from knowledge in pieces. We hypothesise as a possible source of this apparent contradiction that predictions and explanations use different resources: the former would use reflex, low-cost cognitive resources while the latter would involve conceptualisations. We show that the articulation of both resources may be crucial for expert thinking productivity (the ability to apply a theory to novel situations). We sketch some consequences of the proposed structure of commonsense thinking for teaching and further research.

Collaborative spectrum sensing based on the ratio between largest eigenvalue and Geometric mean of eigenvalues

KAUST Repository

Shakir, Muhammad

2011-12-01

In this paper, we introduce a new detector referred to as Geometric mean detector (GEMD) which is based on the ratio of the largest eigenvalue to the Geometric mean of the eigenvalues for collaborative spectrum sensing. The decision threshold has been derived by employing Gaussian approximation approach. In this approach, the two random variables, i.e. The largest eigenvalue and the Geometric mean of the eigenvalues are considered as independent Gaussian random variables such that their cumulative distribution functions (CDFs) are approximated by a univariate Gaussian distribution function for any number of cooperating secondary users and received samples. The approximation approach is based on the calculation of exact analytical moments of the largest eigenvalue and the Geometric mean of the eigenvalues of the received covariance matrix. The decision threshold has been calculated by exploiting the CDF of the ratio of two Gaussian distributed random variables. In this context, we exchange the analytical moments of the two random variables with the moments of the Gaussian distribution function. The performance of the detector is compared with the performance of the energy detector and eigenvalue ratio detector. Analytical and simulation results show that our newly proposed detector yields considerable performance advantage in realistic spectrum sensing scenarios. Moreover, our results based on proposed approximation approach are in perfect agreement with the empirical results. © 2011 IEEE.

Will southern California remain a premium market for natural gas?

International Nuclear Information System (INIS)

John, F.E.

1991-01-01

Average yearly demand for natural gas in southern California totalled just over 3 billion ft 3 /d in 1991 and is projected to increase to just over 3.2 billion ft 3 /d in 2000 and 3.4 billion ft 3 /d in 2010. In the core residential market, demand is being driven by population growth and offset by conservation measures. In the core commercial and industrial market, demand is driven by employment growth and offset by conservation. In the noncore market, natural gas use is expected to fall from 262 million ft 3 /d in 1991 to 223 million ft 3 /d in 2010. Demand for natural gas for cogeneration is expected to either remain stagnant or decrease. The largest potential for market growth in southern California is for utility electric generation. Demand in this sector is expected to increase from 468 million ft 3 /d in 1991 to 1 billion ft 3 in 2010. Air quality concerns furnish a market opportunity for natural gas vehicles, and a substantial increase in natural gas demand might be obtained from even a modest market share of the region's 10 million vehicles. Existing pipeline capacity is sufficient to supply current average year requirements, and the need for new capacity hinges on the issues of satisfying high-year demand, meeting market growth, and accessing more desirable supply regions. Planned capacity additions of 2,150 million ft 3 /d, if completed, will bring substantial excess capacity to southern California in the late 1990s. The competitive advantages of various producing regions will then be greatly influenced by the rate designs used on the pipelines connecting them to the market. 4 tabs

Well-Defined Cyclic Triblock Terpolymers: A Missing Piece of the Morphology Puzzle

KAUST Repository

Polymeropoulos, George

2016-10-27

Two well-defined cyclic triblock terpolymers, missing pieces of the terpolymer morphology puzzle, consisting of poly(isoprene), polystyrene, and poly(2-vinylpyridine), were synthesized by combining the Glaser coupling reaction with anionic polymerization. An α,ω-dihydroxy linear triblock terpolymer (OH-PI1,4-b-PS-b-P2VP-OH) was first synthesized followed by transformation of the OH to alkyne groups by esterification with pentynoic acid and cyclization by Glaser coupling. The size exclusion chromatography (SEC) trace of the linear terpolymer precursor was shifted to lower elution time after cyclization, indicating the successful synthesis of the cyclic terpolymer. Additionally, the SEC trace of the cyclic terpolymer produced, after cleavage of the ester groups, shifted again practically to the position corresponding to the linear precursor. The first exploratory results on morphology showed the tremendous influence of the cyclic structure on the morphology of terpolymers. © 2016 American Chemical Society.

Identifying musical pieces from fMRI data using encoding and decoding models.

Science.gov (United States)

Hoefle, Sebastian; Engel, Annerose; Basilio, Rodrigo; Alluri, Vinoo; Toiviainen, Petri; Cagy, Maurício; Moll, Jorge

2018-02-02

Encoding models can reveal and decode neural representations in the visual and semantic domains. However, a thorough understanding of how distributed information in auditory cortices and temporal evolution of music contribute to model performance is still lacking in the musical domain. We measured fMRI responses during naturalistic music listening and constructed a two-stage approach that first mapped musical features in auditory cortices and then decoded novel musical pieces. We then probed the influence of stimuli duration (number of time points) and spatial extent (number of voxels) on decoding accuracy. Our approach revealed a linear increase in accuracy with duration and a point of optimal model performance for the spatial extent. We further showed that Shannon entropy is a driving factor, boosting accuracy up to 95% for music with highest information content. These findings provide key insights for future decoding and reconstruction algorithms and open new venues for possible clinical applications.

Piecing together the puzzle: Improving event content coverage for real-time sub-event detection using adaptive microblog crawling.

Science.gov (United States)

Tokarchuk, Laurissa; Wang, Xinyue; Poslad, Stefan

2017-01-01

In an age when people are predisposed to report real-world events through their social media accounts, many researchers value the benefits of mining user generated content from social media. Compared with the traditional news media, social media services, such as Twitter, can provide more complete and timely information about the real-world events. However events are often like a puzzle and in order to solve the puzzle/understand the event, we must identify all the sub-events or pieces. Existing Twitter event monitoring systems for sub-event detection and summarization currently typically analyse events based on partial data as conventional data collection methodologies are unable to collect comprehensive event data. This results in existing systems often being unable to report sub-events in real-time and often in completely missing sub-events or pieces in the broader event puzzle. This paper proposes a Sub-event detection by real-TIme Microblog monitoring (STRIM) framework that leverages the temporal feature of an expanded set of news-worthy event content. In order to more comprehensively and accurately identify sub-events this framework first proposes the use of adaptive microblog crawling. Our adaptive microblog crawler is capable of increasing the coverage of events while minimizing the amount of non-relevant content. We then propose a stream division methodology that can be accomplished in real time so that the temporal features of the expanded event streams can be analysed by a burst detection algorithm. In the final steps of the framework, the content features are extracted from each divided stream and recombined to provide a final summarization of the sub-events. The proposed framework is evaluated against traditional event detection using event recall and event precision metrics. Results show that improving the quality and coverage of event contents contribute to better event detection by identifying additional valid sub-events. The novel combination of

Piecing together the puzzle: Improving event content coverage for real-time sub-event detection using adaptive microblog crawling.

Directory of Open Access Journals (Sweden)

Laurissa Tokarchuk

Full Text Available In an age when people are predisposed to report real-world events through their social media accounts, many researchers value the benefits of mining user generated content from social media. Compared with the traditional news media, social media services, such as Twitter, can provide more complete and timely information about the real-world events. However events are often like a puzzle and in order to solve the puzzle/understand the event, we must identify all the sub-events or pieces. Existing Twitter event monitoring systems for sub-event detection and summarization currently typically analyse events based on partial data as conventional data collection methodologies are unable to collect comprehensive event data. This results in existing systems often being unable to report sub-events in real-time and often in completely missing sub-events or pieces in the broader event puzzle. This paper proposes a Sub-event detection by real-TIme Microblog monitoring (STRIM framework that leverages the temporal feature of an expanded set of news-worthy event content. In order to more comprehensively and accurately identify sub-events this framework first proposes the use of adaptive microblog crawling. Our adaptive microblog crawler is capable of increasing the coverage of events while minimizing the amount of non-relevant content. We then propose a stream division methodology that can be accomplished in real time so that the temporal features of the expanded event streams can be analysed by a burst detection algorithm. In the final steps of the framework, the content features are extracted from each divided stream and recombined to provide a final summarization of the sub-events. The proposed framework is evaluated against traditional event detection using event recall and event precision metrics. Results show that improving the quality and coverage of event contents contribute to better event detection by identifying additional valid sub-events. The

Analysis of Multiple Structural Changes in Financial Contagion Based on the Largest Lyapunov Exponents

Directory of Open Access Journals (Sweden)

Rui Wang

2014-01-01

Full Text Available A modified multiple structural changes model is built to test structural breaks of the financial system based on calculating the largest Lyapunov exponents of the financial time series. Afterwards, the Lorenz system is used as a simulation example to inspect the new model. As the Lorenz system has strong nonlinearity, the verification results show that the new model has good capability in both finding the breakpoint and revealing the changes in nonlinear characteristics of the time series. The empirical study based on the model used daily data from the S&P 500 stock index during the global financial crisis from 2005 to 2012. The results provide four breakpoints of the period, which divide the contagion into four stages: stationary, local outbreak, global outbreak, and recovery period. An additional significant result is the obvious chaos characteristic difference in the largest Lyapunov exponents and the standard deviation at various stages, particularly at the local outbreak stage.

World's largest off-road tires to be recycled

Energy Technology Data Exchange (ETDEWEB)

Anon.

2005-07-01

Suncor Energy is the first company in Canada to use a new technology designed uniquely for tire recycling at oil sand facilities. The technology is owned by CuttingEdge Tire Recycling, a partnership between Denesoline Environmental Limited Partnership and Beaver Environmental Rubber Technologies Limited. Suncor has supported the development of this Aboriginal-owned and operated business by offering land, electricity, diesel fuel and stockpiles of used truck tires from its oil sand mining activities. These tires are the largest off-road tires in the world. In this new technology, tires that are worn-out through oil sand mining are shredded in a portable shredder before being recycled for subsequent use by the Alberta Recycling Management Association. 1 fig.

The influence of A-segregation on the risk of fracture in a feed water connection piece

International Nuclear Information System (INIS)

Nilsson, F.

1981-11-01

The inhomogeneities of a reactor tank in form of A-segregation may reduce the fracture toughness of the material. The investigation presents an estimate of the promoting effect of the segregation in a connection piece. A probabilitic model is used and the probability to initiate the growth is found to increase by a facter of 2 to 10. A stability analysis is made by means of the stability criterium. The safeguard against the unstable growth is found to be great. The crack-arrest analysis shows that a prevention of cracks should take place. This analysis is very coarse.(G.B.)

Using Telepresence to Connect and Engage Classes and the Public in the Exploration of Tamu Massif, the World's Largest Single Volcano

Science.gov (United States)

Nanez-James, S. E.; Sager, W.

2016-02-01

Research published in 2013 showed that TAMU Massif, the largest mountain in the Shatsky Rise oceanic plateau, located approximately 1500 kilometers east of Japan, is the "World's Largest Single Volcano." This claim garnered widespread public interest and wonder concerning how something so big could remain so mysterious in the 21st century. This disconnect highlights the fact that oceans are still widely unexplored, especially the middle of the deep ocean. Because there is so much interest in TAMU Massif, a diverse outreach team lead by chief scientist Dr. William Sager from the University of Houston in partnership with the Texas State Aquarium and the Schmidt Ocean Institute (SOI) conducted a multifaceted ship-to-shore outreach project that included secondary school students, formal and informal educators, university students and professors, the aquarium and museum audience, and the general public. The objective was to work in conjunction with SOI and various other partners, including the Texas Regional Collaborative, the Aquarium of the Pacific, and the Houston Museum of Natural Science, to promote science and ocean literacy while inspiring future scientists - especially those from underserved and underrepresented groups - through ocean connections. Participants were connected through live ship-to-shore distance learning broadcasts of ongoing marine research and discovery of TAMU Massif aboard the R/V Falkor, allowing audiences to participate in real-time research and apply real world science to curriculum in the classrooms. These ship-to-shore presentations connected to existing curriculums and standards, lessons, and career interests of the students and educators with special teacher events and professional development workshops conducted from aboard the R/V Falkor.

Expectations Evoked on Hearing a Piece of Music for the First Time: Evidence from a Musical Savant

Directory of Open Access Journals (Sweden)

Ruth Grundy

2015-01-01

Full Text Available The purpose of this study is to investigate a hitherto unresearched feature of the “zygonic” model of implication and expectation in music: in particular, the projections that stem from recently appearing groups of notes (Ockelford, 2006. Using an innovative approach, data were gathered from a prodigious musical savant (Derek Paravicini, who attempted to reproduce a novel composition on the piano at the same time as hearing it. The piece was designed to minimise the impact of expectations that may arise from patterns within groups of notes and those that may be perceived as a consequence of tonality, whereby different pitch transitions are felt to occur with different probabilities according to their level of past exposure. The design of the study was informed by zygonic theory (Ockelford, 2009, 2012b, which holds that expectation in music is attributable to the capacity of structural regularities to suggest future continuations, whose perceived likelihood of occurrence, it is believed, is proportional to the number of ways in which their existence is implied in what has gone before. Using this principle, a “strength of implication” factor was calculated for each note of the stimulus piece (following the first. It was hypothesised that the higher the implication factor, the more likely Derek would predict its occurrence (and therefore play it correctly at the appropriate point in time. Data gathered from Derek’s performance support the underlying principles of the zygonic model, although they also suggest certain refinements.

Dissolved Oxygen Dynamics in Backwaters of North America's Largest River Swamp

Science.gov (United States)

Bueche, S. M.; Xu, Y. J.; Reiman, J. H.

2017-12-01

The Atchafalaya River (AR) is the largest distributary of the Mississippi River flowing through south-central Louisiana, creating North America's largest river swamp basin - the Atchafalaya River Basin (ARB). Prior to human settlement, the AR's main channel was highly connected to this large wetland ecosystem. However, due to constructed levee systems and other human modifications, much of the ARB is now hydrologically disconnected from the AR's main channel except during high flow events. This lack of regular inputs of fresh, oxygenated water to these wetlands, paired with high levels of organic matter decomposition in wetlands, has caused low oxygen-deprived hypoxic conditions in the ARB's back waters. In addition, due to the incredibly nutrient-rich and warm nature of the ARB, microbial decomposition in backwater areas with limited flow often results in potentially stressful, if not lethal, levels of DO for organisms during and after flood pulses. This study aims to investigate dynamics of dissolved oxygen in backwaters of the Atchafalaya River Basin, intending to answer a crucial question about hydrological and water quality connectivity between the river's mainstem and its floodplain. Specifically, the study will 1) conduct field water quality measurements, 2) collect composite water samples for chemical analysis of nutrients and carbon, 3) investigate DO dynamics over different seasons for one year, and 4) determine the major factors that affect DO dynamics in this unique swamp ecosystem. The study is currently underway; therefore, in this presentation we will share the major findings gained in the past several months and discuss backwater effects on river chemistry.

Ownership structure and economic and socio-environmental disclosure in the largest Brazilian companies

Directory of Open Access Journals (Sweden)

Tatiana Aquino Almeida

2016-01-01

Full Text Available The disclosure of sustainable practices has become important in the search for competitive advantage, so as to meet the expectations of the various stakeholders. Thus, the study aims to investigate the relationship between the ownership structure and the economic and environmental voluntary disclosure in the largest Brazilian companies, analyzing ownership concentration and the identity of the controlling shareholder. For the analysis, we considered the economic, social and environmental perspectives, addressed both individually and jointly. The sample consists of 47 companies from the 100 largest public companies listed on BM&FBOVESPA, according to the magazine Exame Biggest and Best, edition 2013. The research is descriptive and quantitative, using Multiple Linear Regression for statistical analysis. The descriptive analysis of the prospects of (economic, social, environmental and sustainability disclosure showed lower average disclosure for the environmental aspect. The state control organizations stood out with the highest average in three of the four levels of disclosure: economic, social and sustainability. As regards the application of statistical analysis, the regression models were not statistically significant, indicating that, for the companies in the sample, the ownership structure does not influence the economic and socio-environmental disclosure.

Selection of Levels of Dressing Process Parameters by Using TOPSIS Technique for Surface Roughness of En-31 Work piece in CNC Cylindrical Grinding Machine

Science.gov (United States)

Patil, Sanjay S.; Bhalerao, Yogesh J.

2017-02-01

Grinding is metal cutting process used for mainly finishing the automobile components. The grinding wheel performance becomes dull by using it most of times. So it should be reshaping for consistent performance. It is necessary to remove dull grains of grinding wheel which is known as dressing process. The surface finish produced on the work piece is dependent on the dressing parameters in sub-sequent grinding operation. Multi-point diamond dresser has four important parameters such as the dressing cross feed rate, dressing depth of cut, width of the diamond dresser and drag angle of the dresser. The range of cross feed rate level is from 80-100 mm/min, depth of cut varies from 10 - 30 micron, width of diamond dresser is from 0.8 - 1.10mm and drag angle is from 40o - 500, The relative closeness to ideal levels of dressing parameters are found for surface finish produced on the En-31 work piece during sub-sequent grinding operation by using Technique of Order Preference by Similarity to Ideal Solution (TOPSIS).In the present work, closeness to ideal solution i.e. levels of dressing parameters are found for Computer Numerical Control (CNC) cylindrical angular grinding machine. After the TOPSIS technique, it is found that the value of Level I is 0.9738 which gives better surface finish on the En-31 work piece in sub-sequent grinding operation which helps the user to select the correct levels (combinations) of dressing parameters.

Vascular access in lipoprotein apheresis: a retrospective analysis from the UK's largest lipoprotein apheresis centre.

Science.gov (United States)

Doherty, Daniel J; Pottle, Alison; Malietzis, George; Hakim, Nadey; Barbir, Mahmoud; Crane, Jeremy S

2018-01-01

Lipoprotein apheresis (LA) has proven to be an effective, safe and life-saving therapy. Vascular access is needed to facilitate this treatment but has recognised complications. Despite consistency in treatment indication and duration there are no guidelines in place. The aim of this study is to characterise vascular access practice at the UK's largest LA centre and forward suggestions for future approaches. A retrospective analysis of vascular access strategies was undertaken in all patients who received LA treatment in the low-density lipoprotein (LDL) Apheresis Unit at Harefield Hospital (Middlesex, UK) from November 2000 to March 2016. Fifty-three former and current patients underwent 4260 LA treatments. Peripheral vein cannulation represented 79% of initial vascular access strategies with arteriovenous (AV) fistula use accounting for 15%. Last used method of vascular access was peripheral vein cannulation in 57% versus AV fistula in 32%. Total AV fistula failure rate was 37%. Peripheral vein cannulation remains the most common method to facilitate LA. Practice trends indicate a move towards AV fistula creation; the favoured approach receiving support from the expert body in this area. AV fistula failure rate is high and of great concern, therefore we suggest the implementation of upper limb ultrasound vascular mapping in all patients who meet treatment eligibility criteria. We encourage close ties between apheresis units and specialist surgical centres to facilitate patient counselling and monitoring. Further prospective data regarding fistula failure is needed in this expanding treatment field.

OBJECT TRACKING WITH ROTATION-INVARIANT LARGEST DIFFERENCE INDEXED LOCAL TERNARY PATTERN

Directory of Open Access Journals (Sweden)

J Shajeena

2017-02-01

Full Text Available This paper presents an ideal method for object tracking directly in the compressed domain in video sequences. An enhanced rotation-invariant image operator called Largest Difference Indexed Local Ternary Pattern (LDILTP has been proposed. The Local Ternary Pattern which worked very well in texture classification and face recognition is now extended for rotation invariant object tracking. Histogramming the LTP code makes the descriptor resistant to translation. The histogram intersection is used to find the similarity measure. This method is robust to noise and retain contrast details. The proposed scheme has been verified on various datasets and shows a commendable performance.

Case study for one-piece removal method of reactor vessel of nuclear ship 'Mutsu'

International Nuclear Information System (INIS)

Nagane, Satoru; Kitahara, Katsumi; Yoshikawa, Seiji; Miyasaka, Yasuhiko; Fukumura, Nobuo; Nisizawa, Ichiou

2010-01-01

A reactor installed at the center part of the nuclear ship 'Mutsu' has been stored safely and exhibited in a reactor room building since 1996. The reactor vessel and its internals are key components because of main radioactive wastes for the reasonable decommissioning plan in the future. This report describes the one-piece removal method as the one package of the reactor vessel with its internals intact with a shipping container or additional shields. The reactor vessel package (Max.100ton) will be classified acceptable for burial at the low level radioactive waste (LLW), which will be buried at a LLW pit facility under waste disposal regulations. And also, the package will be classified as an IP-2-equivalent package according to the requirement for Shipments and Packagings. (author)

Application of gamma radiation to the nodes detection in Pinus Radiata (D.Don) wood pieces; Aplicacion de la radiacion gamma en la deteccion de nudos en piezas de madera de Pino Radiata (D.Don)

Energy Technology Data Exchange (ETDEWEB)

Morales, J R; Dinator, Maria I [Chile Univ., Santiago (Chile). Dept. de Fisica; Karsulovic C, Jose T; Leon G, Adolfo [Chile Univ., Santiago (Chile). Dept. de Tecnologia de la Madera

1997-12-31

Attenuation of 59.5 KeV photons provided by an Am-241 source, has been used to detect knots in lumber pieces from Pinus Radiata (D.Don). It is shown that the linear attenuation coefficient is a sensitive parameter to detect singularities in the structure of this material. The scanning of the piece provides profiles which define the position and extension of the singularity. (author). 7 refs.

Study of the microstructural characteristics of archaeological pieces of pre hispanic green stone

International Nuclear Information System (INIS)

Carapia M, L.

2004-01-01

The work consists of the following chapters; in the first one information about the meaning, uses and origin of the pre hispanic green stone in the old Mexico are presented, the mineral and chemical characteristics of the green stone and the origin of the pieces in study of the project collection Eduardo Pareyon. In the second chapter the experimental method for the characterization is described and each one of the analysis techniques used for the study of the objects of green stone are also enumerated, as well as the methods of preparation of the samples for the determination of hardness, Analytic Scanning Electron Microscopy, X-ray Fluorescence and the X-ray Diffraction. In the third chapter it is presented and it discusses the information and obtained results of each one of the analysed samples. Finally in the fourth chapter the concreted conclusions are presented in the present work. (Author)

First Solar and Stellar Paintings in the Epipaleolithic and Neolithic Rock Art of the Iberian Peninsula (II): new Shelters and Ceramic Pieces decorated with Astral Paintings

Science.gov (United States)

Quintano, J. F.

2009-08-01

This paper is a continuation of the research into the astronomical reasons behind prehistoric rock and mobiliary art in the Iberian Peninsula, the first part of which was presented in the previous SEAC Congress celebrated in 2007 in Klaipeda (Lithuania). It proposes that all heavenly objects painted as rock art and on ceramic pieces be given the name of astraliformes [=solar and stellar paintings]. The six astraliformes from the two shelters visited, and the ceramic pieces on which astraliformes appear in the Prehistoric Museum of Granada are presented. Astraliformes appear in schematic art in a sudden manner and on a large scale, and are included in the panel because of their function as a means of regulating and promoting the agrarian cycle.

Differential genome-wide gene expression profiling of bovine largest and second-largest follicles: identification of genes associated with growth of dominant follicles

Directory of Open Access Journals (Sweden)

Takahashi Toru

2010-02-01

Full Text Available Abstract Background Bovine follicular development is regulated by numerous molecular mechanisms and biological pathways. In this study, we tried to identify differentially expressed genes between largest (F1 and second-largest follicles (F2, and classify them by global gene expression profiling using a combination of microarray and quantitative real-time PCR (QPCR analysis. The follicular status of F1 and F2 were further evaluated in terms of healthy and atretic conditions by investigating mRNA localization of identified genes. Methods Global gene expression profiles of F1 (10.7 +/- 0.7 mm and F2 (7.8 +/- 0.2 mm were analyzed by hierarchical cluster analysis and expression profiles of 16 representative genes were confirmed by QPCR analysis. In addition, localization of six identified transcripts was investigated in healthy and atretic follicles using in situ hybridization. The healthy or atretic condition of examined follicles was classified by progesterone and estradiol concentrations in follicular fluid. Results Hierarchical cluster analysis of microarray data classified the follicles into two clusters. Cluster A was composed of only F2 and was characterized by high expression of 31 genes including IGFBP5, whereas cluster B contained only F1 and predominantly expressed 45 genes including CYP19 and FSHR. QPCR analysis confirmed AMH, CYP19, FSHR, GPX3, PlGF, PLA2G1B, SCD and TRB2 were greater in F1 than F2, while CCL2, GADD45A, IGFBP5, PLAUR, SELP, SPP1, TIMP1 and TSP2 were greater in F2 than in F1. In situ hybridization showed that AMH and CYP19 were detected in granulosa cells (GC of healthy as well as atretic follicles. PlGF was localized in GC and in the theca layer (TL of healthy follicles. IGFBP5 was detected in both GC and TL of atretic follicles. GADD45A and TSP2 were localized in both GC and TL of atretic follicles, whereas healthy follicles expressed them only in GC. Conclusion We demonstrated that global gene expression profiling of F

Fish remains and humankind: part two

Directory of Open Access Journals (Sweden)

Andrew K G Jones

1998-07-01

Full Text Available The significance of aquatic resources to past human groups is not adequately reflected in the published literature - a deficiency which is gradually being acknowledged by the archaeological community world-wide. The publication of the following three papers goes some way to redress this problem. Originally presented at an International Council of Archaeozoology (ICAZ Fish Remains Working Group meeting in York, U.K. in 1987, these papers offer clear evidence of the range of interest in ancient fish remains across the world. Further papers from the York meeting were published in Internet Archaeology 3 in 1997.

The 10 largest public and philanthropic funders of health research in the world: what they fund and how they distribute their funds.

Science.gov (United States)

Viergever, Roderik F; Hendriks, Thom C C

2016-02-18

Little is known about who the main public and philanthropic funders of health research are globally, what they fund and how they decide what gets funded. This study aims to identify the 10 largest public and philanthropic health research funding organizations in the world, to report on what they fund, and on how they distribute their funds. The world's key health research funding organizations were identified through a search strategy aimed at identifying different types of funding organizations. Organizations were ranked by their reported total annual health research expenditures. For the 10 largest funding organizations, data were collected on (1) funding amounts allocated towards 20 health areas, and (2) schemes employed for distributing funding (intramural/extramural, project/'people'/organizational and targeted/untargeted funding). Data collection consisted of a review of reports and websites and interviews with representatives of funding organizations. Data collection was challenging; data were often not reported or reported using different classification systems. Overall, 55 key health research funding organizations were identified. The 10 largest funding organizations together funded research for $37.1 billion, constituting 40% of all public and philanthropic health research spending globally. The largest funder was the United States National Institutes of Health ($26.1 billion), followed by the European Commission ($3.7 billion), and the United Kingdom Medical Research Council ($1.3 billion). The largest philanthropic funder was the Wellcome Trust ($909.1 million), the largest funder of health research through official development assistance was USAID ($186.4 million), and the largest multilateral funder was the World Health Organization ($135.0 million). Funding distribution mechanisms and funding patterns varied substantially between the 10 largest funders. There is a need for increased transparency about who the main funders of health research are

Draft sequencing and assembly of the genome of the world's largest fish, the whale shark: Rhincodon typus Smith 1828.

Science.gov (United States)

Read, Timothy D; Petit, Robert A; Joseph, Sandeep J; Alam, Md Tauqeer; Weil, M Ryan; Ahmad, Maida; Bhimani, Ravila; Vuong, Jocelyn S; Haase, Chad P; Webb, D Harry; Tan, Milton; Dove, Alistair D M

2017-07-14

The whale shark (Rhincodon typus) has by far the largest body size of any elasmobranch (shark or ray) species. Therefore, it is also the largest extant species of the paraphyletic assemblage commonly referred to as fishes. As both a phenotypic extreme and a member of the group Chondrichthyes - the sister group to the remaining gnathostomes, which includes all tetrapods and therefore also humans - its genome is of substantial comparative interest. Whale sharks are also listed as an endangered species on the International Union for Conservation of Nature's Red List of threatened species and are of growing popularity as both a target of ecotourism and as a charismatic conservation ambassador for the pelagic ecosystem. A genome map for this species would aid in defining effective conservation units and understanding global population structure. We characterised the nuclear genome of the whale shark using next generation sequencing (454, Illumina) and de novo assembly and annotation methods, based on material collected from the Georgia Aquarium. The data set consisted of 878,654,233 reads, which yielded a draft assembly of 1,213,200 contigs and 997,976 scaffolds. The estimated genome size was 3.44Gb. As expected, the proteome of the whale shark was most closely related to the only other complete genome of a cartilaginous fish, the holocephalan elephant shark. The whale shark contained a novel Toll-like-receptor (TLR) protein with sequence similarity to both the TLR4 and TLR13 proteins of mammals and TLR21 of teleosts. The data are publicly available on GenBank, FigShare, and from the NCBI Short Read Archive under accession number SRP044374. This represents the first shotgun elasmobranch genome and will aid studies of molecular systematics, biogeography, genetic differentiation, and conservation genetics in this and other shark species, as well as providing comparative data for studies of evolutionary biology and immunology across the jawed vertebrate lineages.

Phase space reconstruction and estimation of the largest Lyapunov exponent for gait kinematic data

Energy Technology Data Exchange (ETDEWEB)

Josiński, Henryk [Silesian University of Technology, Akademicka 16, 44-100 Gliwice (Poland); Świtoński, Adam [Polish-Japanese Institute of Information Technology, Aleja Legionów 2, 41-902 Bytom (Poland); Silesian University of Technology, Akademicka 16, 44-100 Gliwice (Poland); Michalczuk, Agnieszka; Wojciechowski, Konrad [Polish-Japanese Institute of Information Technology, Aleja Legionów 2, 41-902 Bytom (Poland)

2015-03-10

The authors describe an example of application of nonlinear time series analysis directed at identifying the presence of deterministic chaos in human motion data by means of the largest Lyapunov exponent. The method was previously verified on the basis of a time series constructed from the numerical solutions of both the Lorenz and the Rössler nonlinear dynamical systems.

Carbon and energy fluxes from China's largest freshwater lake

Science.gov (United States)

Gan, G.; LIU, Y.

2017-12-01

Carbon and energy fluxes between lakes and the atmosphere are important aspects of hydrology, limnology, and ecology studies. China's largest freshwater lake, the Poyang lake experiences tremendous water-land transitions periodically throughout the year, which provides natural experimental settings for the study of carbon and energy fluxes. In this study, we use the eddy covariance technique to explore the seasonal and diurnal variation patterns of sensible and latent heat fluxes of Poyang lake during its high-water and low-water periods, when the lake is covered by water and mudflat, respectively. We also determine the annual NEE of Poyang lake and the variations of NEE's components: Gross Primary Productivity (GPP) and Ecosystem Respiration (Re). Controlling factors of seasonal and diurnal variations of carbon and energy fluxes are analyzed, and land cover impacts on the variation patterns are also studied. Finally, the coupling between the carbon and energy fluxes are analyzed under different atmospheric, boundary stability and land cover conditions.

Dragon's paradise lost: palaeobiogeography, evolution and extinction of the largest-ever terrestrial lizards (Varanidae.

Directory of Open Access Journals (Sweden)

Scott A Hocknull

Full Text Available BACKGROUND: The largest living lizard species, Varanus komodoensis Ouwens 1912, is vulnerable to extinction, being restricted to a few isolated islands in eastern Indonesia, between Java and Australia, where it is the dominant terrestrial carnivore. Understanding how large-bodied varanids responded to past environmental change underpins long-term management of V. komodoensis populations. METHODOLOGY/PRINCIPAL FINDINGS: We reconstruct the palaeobiogeography of Neogene giant varanids and identify a new (unnamed species from the island of Timor. Our data reject the long-held perception that V. komodoensis became a giant because of insular evolution or as a specialist hunter of pygmy Stegodon. Phyletic giantism, coupled with a westward dispersal from mainland Australia, provides the most parsimonious explanation for the palaeodistribution of V. komodoensis and the newly identified species of giant varanid from Timor. Pliocene giant varanid fossils from Australia are morphologically referable to V. komodoensis suggesting an ultimate origin for V. komodoensis on mainland Australia (>3.8 million years ago. Varanus komodoensis body size has remained stable over the last 900,000 years (ka on Flores, a time marked by major faunal turnovers, extinction of the island's megafauna, the arrival of early hominids by 880 ka, co-existence with Homo floresiensis, and the arrival of modern humans by 10 ka. Within the last 2000 years their populations have contracted severely. CONCLUSIONS/SIGNIFICANCE: Giant varanids were once a ubiquitous part of Subcontinental Eurasian and Australasian faunas during the Neogene. Extinction played a pivotal role in the reduction of their ranges and diversity throughout the late Quaternary, leaving only V. komodoensis as an isolated long-term survivor. The events over the last two millennia now threaten its future survival.

Trend of CO2 emissions of the 30 largest power plants in Germany

International Nuclear Information System (INIS)

Hermann, Hauke

2014-01-01

The brochure on the trend of CO 2 emissions of the 30 largest power plants in Germany includes tables of the emissions of these power plants. The CO 2 emissions of these power plants in 2013 (25% of the total German greenhouse gas emissions) have increased by 5% compared to 2012. The total CO 2 emission sin Germany increased by 1.5%. The differences between brown coal and black coal fired power plants are discussed.

APPRAISAL OF APPLICATION OF WEAR-RESISTANT CHROMIC CAST IRONS FOR PRODUCTION OF MOULDED PIECES OF EQUIPMENT ON PRODUCTION OF BRICK OF CLAY

Directory of Open Access Journals (Sweden)

K. E. aranovkij

2007-01-01

Full Text Available The appraisal of application of wear-resistant chromic cast irons of different chemical compositions for production of moulded pieces of equipment on production of bricks of clay is carried out. It is determined that working resource of the details of test cast-irons is correlated with their hardness and not lower than of hardened steel.

Potential Teachers' Appropriate and Inappropriate Application of Pedagogical Resources in a Model-Based Physics Course: A "Knowledge in Pieces" Perspective on Teacher Learning

Science.gov (United States)

Harlow, Danielle B.; Bianchini, Julie A.; Swanson, Lauren H.; Dwyer, Hilary A.

2013-01-01

We used a "knowledge in pieces" perspective on teacher learning to document undergraduates' pedagogical resources in a model-based physics course for potential teachers. We defined pedagogical resources as small, discrete ideas about teaching science that are applied appropriately or inappropriately in specific contexts. Neither…

Foraging of the Indian Short-nosed Fruit Bat Cynopterus sphinx on banana in shops and on the pieces dropped by monkeys at a temple

Directory of Open Access Journals (Sweden)

A. Rathinakumar

2016-11-01

Full Text Available The Indian Short-nosed Fruit Bat Cynopterus sphinx fed on the pieces of banana fruit that were dropped by monkeys on the tower of a temple and in nearby shops.  The monkeys obtained fruits from devotees and shop owners.  The peak number of bat visits occurred during pre- and post- midnight hours at the tower and shops, respectively, coinciding with the lights off situation and reduced human disturbance.  The bats landed on bunches of ripe bananas hanging in the front of shops.  The number of bat landings on the tower was greater than that in the shops.  The overall number of bat visits were higher during October when compared to other periods of the year.  This may be due to the occurrence of more festivals during October.  Our study is an example of opportunistic feeding, in which banana pieces dropped while monkeys were feeding on them were eaten by the bats.

Quicksort, largest bucket, and min-wise hashing with limited independence

DEFF Research Database (Denmark)

Knudsen, Mathias Bæk Tejs; Stöckel, Morten

2015-01-01

Randomized algorithms and data structures are often analyzed under the assumption of access to a perfect source of randomness. The most fundamental metric used to measure how “random” a hash function or a random number generator is, is its independence: a sequence of random variables is said...... to be k-independent if every variable is uniform and every size k subset is independent. In this paper we consider three classic algorithms under limited independence. Besides the theoretical interest in removing the unrealistic assumption of full independence, the work is motivated by lower independence...... being more practical. We provide new bounds for randomized quicksort, min-wise hashing and largest bucket size under limited independence. Our results can be summarized as follows. Randomized Quicksort. When pivot elements are computed using a 5-independent hash function, Karloff and Raghavan, J.ACM’93...

Developing an experimental case in aluminium foils 1100 to determine the maximum angle of formability in a piece by Dieless-SPIF process

Science.gov (United States)

Gabriel, Paramo; Adrian, Benitez

2014-07-01

Incremental sheet forming by the method of single point incremental forming Dieless-SPIF, is a widely studied process, experimented and developed in countries with high manufacturing technologies, with friendly costs when the productive configuration in a productivity system is based in small production batches. United states, United kingdom and France lead this type of studies and cases, developing various proof with experimental geometries, different from the national environment such as Colombia, Bolivia, Chile, Ecuador and Peru where this process where discretely studied. Previously mentioned, it pretends develop an experimental case of a particular geometry, identifying the maximum formability angle of material permissible for the forming of a piece in one pass, the analysis of forming limit curve (FLC), with the objective to emphasizes in this innovative method based in CAD-CAM technologies, compare with other analogous process of deformation sheet metal like embossing, take correct decisions about the viability and applicability of this process (Dieless) in a particular industrial piece, which responses to the necessities of productive configurations mentioned and be highly taken like a manufacturing alternative to the other conventional process of forming sheet metal like embossing, for systems with slow batches production.

Developing an experimental case in aluminium foils 1100 to determine the maximum angle of formability in a piece by Dieless-SPIF process

International Nuclear Information System (INIS)

Gabriel, Paramo; Adrian, Benitez

2014-01-01

Incremental sheet forming by the method of single point incremental forming Dieless-SPIF, is a widely studied process, experimented and developed in countries with high manufacturing technologies, with friendly costs when the productive configuration in a productivity system is based in small production batches. United states, United kingdom and France lead this type of studies and cases, developing various proof with experimental geometries, different from the national environment such as Colombia, Bolivia, Chile, Ecuador and Peru where this process where discretely studied. Previously mentioned, it pretends develop an experimental case of a particular geometry, identifying the maximum formability angle of material permissible for the forming of a piece in one pass, the analysis of forming limit curve (FLC), with the objective to emphasizes in this innovative method based in CAD-CAM technologies, compare with other analogous process of deformation sheet metal like embossing, take correct decisions about the viability and applicability of this process (Dieless) in a particular industrial piece, which responses to the necessities of productive configurations mentioned and be highly taken like a manufacturing alternative to the other conventional process of forming sheet metal like embossing, for systems with slow batches production

Review of the patents of Top and Bottom End Piece and fuel materials issued by overseas fuel vendors

International Nuclear Information System (INIS)

Yoon, Kyung Ho; Song, Kee Nam; Kim Hyung Kyu; Kang, Heung Seok; Bang, Je Geon.

1997-06-01

In order to develop new type nuclear fuel which can be loaded in the domestic PWRs without serious design changes, it is very important to understand the developing status of fuel components being conducted by overseas fuel vendors prior to commence the full-scale campaign. In this report, patents recorded in US patent lists have been inquired to understand the object, the background and the peculiarity of the invented components for top/bottom end piece and fuel materials. In addition, the important things which must be considered in development of new type fuel were described. (author). 18 tabs., 63 figs., 24 refs

Stability of prototype two-piece zirconia and titanium implants after artificial aging: an in vitro pilot study.

Science.gov (United States)

Kohal, Ralf-Joachim; Finke, Hans Christian; Klaus, Gerold

2009-12-01

Zirconia oral implants are a new topic in implant dentistry. So far, no data are available on the biomechanical behavior of two-piece zirconia implants. Therefore, the purpose of this pilot investigation was to test in vitro the fracture strength of two-piece cylindrical zirconia implants after aging in a chewing simulator. This laboratory in vitro investigation comprised three different treatment groups. Each group consisted of 16 specimens. In group 1, two-piece zirconia implants were restored with zirconia crowns (zirconia copings veneered with Triceram; Esprident, Ispringen, Germany), and in group 2 zirconia implants received Empress 2 single crowns (Ivoclar Vivadent AG, Schaan, Liechtenstein). The implants, including the abutments, in the two zirconia groups were identical. In group 3, similar titanium implants were reconstructed with porcelain-fused-to-metal crowns. Eight samples of each group were submitted to artificial aging with a long-term load test in the artificial mouth (chewing simulator). Subsequently, all not artificially aged samples and all artificially aged samples that survived the long-term loading of each group were submitted to a fracture strength test in a universal testing machine. For the pairwise comparisons in the different test groups with or without artificial loading and between the different groups at a given artificial loading condition, the Wilcoxon rank-sum test for independent samples was used. The significance level was set at 5%. One sample of group 1 (veneer fracture), none of group 2, and six samples of group 3 (implant abutment screw fractures) failed while exposed to the artificial mouth. The values for the fracture strength after artificial loading with 1.2 million cycles for group 1 were between 45 and 377 N (mean: 275.7 N), in group 2 between 240 and 314 N (mean: 280.7 N), and in the titanium group between 45 and 582 N (mean: 165.7 N). The fracture strength results without artificial load for group 1 amounted to between

Analysis of arecoline in Semen Arecae decoction pieces by microchip capillary electrophoresis with contactless conductivity detection

Directory of Open Access Journals (Sweden)

Zi-You Cai

2012-10-01

Full Text Available A new method for the determination of arecoline in Semen Arecae decoction pieces by microchip capillary electrophoresis with contactless conductivity detection (MCE-CCD was proposed. The effects of various electrophoretic operating parameters on the analysis of arecoline were studied. Under the optimal conditions, arecoline was rapidly separated and detected in 1 min with good linearity over the concentration range of 20–1500 μM (r2=0.9991 and the detection limit of 5 μM (S/N=3. The method was used for the analysis of arecoline satisfactorily with a recovery of 96.8–104%. Keywords: Microchip capillary electrophoresis, Contactless conductivity detection, Arecoline, Semen Arecae

Haven't We Been Here Before? Some Comments on Steve Coffman's Proposal for "Earth's Largest Library".

Science.gov (United States)

McGervey, Teresa

2000-01-01

Discusses the concept of Earth's Largest Library (ELL), a mega-virtual library based on the Amazon.com model. Topics include who will be included; privacy; censorship; scope of the collection; costs; legal aspects; collection development; personnel management; access; the concept of community; public service; lending policies; technical…

Is Kasei Valles (Mars) the largest volcanic channel in the solar system?

Science.gov (United States)

Leverington, David W.

2018-02-01

With a length of more than 2000 km and widths of up to several hundred kilometers, Kasei Valles is the largest outflow system on Mars. Superficially, the scabland-like character of Kasei Valles is evocative of terrestrial systems carved by catastrophic aqueous floods, and the system is widely interpreted as a product of outbursts from aquifers. However, as at other Martian outflow channels, clear examples of fluvial sedimentary deposits have proven difficult to identify here. Though Kasei Valles lacks several key properties expected of aqueous systems, its basic morphological and contextual properties are aligned with those of ancient volcanic channels on Venus, the Moon, Mercury, and Earth. There is abundant evidence that voluminous effusions of low-viscosity magmas occurred at the head of Kasei Valles, the channel system acted as a conduit for associated flows, and mare-style volcanic plains developed within its terminal basin. Combined mechanical and thermal incision rates of at least several meters per day are estimated to have been readily achieved at Kasei Valles by 20-m-deep magmas flowing with viscosities of 1 Pa s across low topographic slopes underlain by bedrock. If Kasei Valles formed through incision by magma, it would be the largest known volcanic channel in the solar system. The total volume of magma erupted at Kasei Valles is estimated here to have possibly reached or exceeded ∼5 × 106 km3, a volume comparable in magnitude to those that characterize individual Large Igneous Provinces on Earth. Development of other large outflow systems on Mars is expected to have similarly involved eruption of up to millions of cubic kilometers of magma.

Time compression of soil erosion by the effect of largest daily event. A regional analysis of USLE database.

Science.gov (United States)

Gonzalez-Hidalgo, J. C.; Batalla, R.; Cerda, A.; de Luis, M.

2009-04-01

When Thornes and Brunsden wrote in 1977 "How often one hears the researcher (and no less the undergraduate) complain that after weeks of observation "nothing happened" only to learn that, the day after his departure, a flood caused unprecedent erosion and channel changes!" (Thornes and Brunsden, 1977, p. 57), they focussed on two different problems in geomorphological research: the effects of extreme events and the temporal compression of geomorphological processes. The time compression is one of the main characteristic of erosion processes. It means that an important amount of the total soil eroded is produced in very short temporal intervals, i.e. few events mostly related to extreme events. From magnitude-frequency analysis we know that few events, not necessarily extreme by magnitude, produce high amount of geomorphological work. Last but not least, extreme isolated events are a classical issue in geomorphology by their specific effects, and they are receiving permanent attention, increased at present because of scenarios of global change. Notwithstanding, the time compression of geomorphological processes could be focused not only on the analysis of extreme events and the traditional magnitude-frequency approach, but on new complementary approach based on the effects of largest events. The classical approach define extreme event as a rare event (identified by its magnitude and quantified by some deviation from central value), while we define largest events by the rank, whatever their magnitude. In a previous research on time compression of soil erosion, using USLE soil erosion database (Gonzalez-Hidalgo et al., EGU 2007), we described a relationship between the total amount of daily erosive events recorded by plot and the percentage contribution to total soil erosion of n-largest aggregated daily events. Now we offer a further refined analysis comparing different agricultural regions in USA. To do that we have analyzed data from 594 erosion plots from USLE

Exosome-Mediated Genetic Information Transfer, a Missing Piece of Osteoblast-Osteoclast Communication Puzzle.

Science.gov (United States)

Yin, Pengbin; Lv, Houchen; Li, Yi; Deng, Yuan; Zhang, Licheng; Tang, Peifu

2017-01-01

The skeletal system functions and maintains itself based on communication between cells of diverse origins, especially between osteoblasts (OBs) and osteoclasts (OCs), accounting for bone formation and resorption, respectively. Previously, protein-level information exchange has been the research focus, and this has been discussed in detail. The regulative effects of microRNAs (miRNAs) on OB and OC ignite the question as to whether genetic information could be transferred between bone cells. Exosomes, extracellular membrane vesicles 30-100 nm in diameter, have recently been demonstrated to transfer functional proteins, mRNAs, and miRNAs, and serve as mediators of intercellular communication. By reviewing the distinguishing features of exosomes, a hypothesis was formulated and evaluated in this article that exosome-mediated genetic information transfer may represent a novel strategy for OB-OC communication. The exosomes may coordinately regulate these two cells under certain physiological conditions by transferring genetic information. Further research in exosome-shuttered miRNAs in OB-OC communication may add a missing piece to the bone cells communication "puzzle."

Kadav Moun PSA (:60) (Human Remains)

Centers for Disease Control (CDC) Podcasts

2010-02-18

This is an important public health announcement about safety precautions for those handling human remains. Language: Haitian Creole.  Created: 2/18/2010 by Centers for Disease Control and Prevention (CDC).   Date Released: 2/18/2010.

Natural radionuclides in soil profiles surrounding the largest coal-fired power plant in Serbia

OpenAIRE

Tanić Milan N.; Janković-Mandić Ljiljana J.; Gajić Boško A.; Daković Marko Z.; Dragović Snežana D.; Bačić Goran G.

2016-01-01

This study evaluates the influence of the largest Serbian coal-fired power plant on radionuclide concentrations in soil profiles up to 50 cm in depth. Thirty soil profiles were sampled from the plant surroundings (up to 10 km distance) and analyzed using standard methods for soil physicochemical properties and gamma ray spectrometry for specific activities of natural radionuclides (40K, 226Ra and 232Th). Spatial and vertical distribution of radionuclides wa...

Magnetic field shimming of a permanent magnet using a combination of pieces of permanent magnets and a single-channel shim coil for skeletal age assessment of children.

Science.gov (United States)

Terada, Y; Kono, S; Ishizawa, K; Inamura, S; Uchiumi, T; Tamada, D; Kose, K

2013-05-01

We adopted a combination of pieces of permanent magnets and a single-channel (SC) shim coil to shim the magnetic field in a magnetic resonance imaging system dedicated for skeletal age assessment of children. The target magnet was a 0.3-T open and compact permanent magnet tailored to the hand imaging of young children. The homogeneity of the magnetic field was first improved by shimming using pieces of permanent magnets. The residual local inhomogeneity was then compensated for by shimming using the SC shim coil. The effectiveness of the shimming was measured by imaging the left hands of human subjects and evaluating the image quality. The magnetic resonance images for the child subject clearly visualized anatomical structures of all bones necessary for skeletal age assessment, demonstrating the usefulness of combined shimming. Copyright © 2013 Elsevier Inc. All rights reserved.

77 FR 13626 - Notice of Inventory Completion: Maxey Museum, Whitman College, Walla Walla, WA

Science.gov (United States)

2012-03-07

... remains representing, at minimum, six individuals were removed from an unknown location near the..., consisting of: 3 envelopes with writing; 1 lot of small pieces of leather belt or harness; 1 lot of charcoal pieces; 3 metal bells; 1 pipe stem; 1 piece of iron; 1 envelope with no writing; 1 chert flake; 1 lot of...

Helicobacter pylori virulence genes in the five largest islands of Indonesia.

Science.gov (United States)

Miftahussurur, Muhammad; Syam, Ari Fahrial; Makmun, Dadang; Nusi, Iswan Abbas; Zein, Lukman Hakim; Zulkhairi; Akil, Fardah; Uswan, Willi Brodus; Simanjuntak, David; Uchida, Tomohisa; Adi, Pangestu; Utari, Amanda Pitarini; Rezkitha, Yudith Annisa Ayu; Subsomwong, Phawinee; Nasronudin; Yamaoka, Yoshio

2015-01-01

It remains unclear whether the low incidence of gastric cancer in Indonesia is due to low infection rates only or is also related to low Helicobacter pylori pathogenicity. We collected H. pylori strains from the five largest islands in Indonesia and evaluated genetic virulence factors. The genotypes of H. pylori virulence factors were determined by polymerase chain reaction (PCR)-based sequencing. Histological severity of the gastric mucosa was classified into 4 grades, according to the updated Sydney system. A total of 44 strains were analyzed. Forty-three (97.7 %) were cagA-positive: 26 (60.5 %) were East-Asian-type-cagA, 9 (20.9 %) were Western-type-cagA, and 8 (18.6 %) were novel ABB-type, most of which were obtained from Papuan. EPIYT sequences were more prevalent than EPIYA sequences (P = 0.01) in the EPIYA-B motif of all types of cagA. The majority of cagA-positive strains (48.8 %, 21/43) had a 6-bp deletion in the first pre-EPIYA region. Subjects infected with East-Asian-type-cagA strains with a 6-bp deletion had significantly lower inflammation and atrophy scores in the corpus than those infected with Western-type-cagA strains (both P = 0.02). In total, 70.4 % of strains possessed the vacA s1m1 genotype and 29.5 % were m2. All strains from peptic ulcer patients were of the iceA1 genotype, which occurred at a significantly higher proportion in peptic ulcer patients than that in gastritis patients (55.3 %, P = 0.04). The double positive genotype of jhp0562/β-(1,3)galT was predominant (28/44, 63.6 %), and subjects infected with this type had significantly higher inflammation scores in the corpus than those with the jhp0562 negative/β-(1,3)galT positive genotype (mean [median]; 1.43 [1] vs. 0.83 [1], P = 0.04). There were significant differences in cagA and pre-EPIYA cagA type, oipA status, and jhp0562/β-(1,3)galT type among different ethnic groups (P dupA negative or short type dupA, and the jhp0562/β-(1,3)galT double positive genotype.

76 FR 62835 - Notice of Inventory Completion: Fort Lewis College, Durango, CO

Science.gov (United States)

2011-10-11

... objects are 1 complete bowl, 1 reconstructed piece of pottery, 2 smaller reconstructed pieces of pottery..., Colorado''). In 1967-1968, human remains representing a minimum of six individuals were removed from a site...

Single-piece maintenance procedures for the TITAN reversed-field pinch reactor

International Nuclear Information System (INIS)

Grotz, S.P.; Creedon, R.L.; Cooke, P.I.H.; Duggan, W.P.; Krakowski, R.A.; Najmabadi, F.; Wong, C.P.C.

1987-01-01

The TITAN reactor is a compact (major radius of 3.9 m and minor plasma radius of 0.6 m), high neutron wall loading (--18MW/m 2 ) fusion energy system based on the reversed-field pinch (RFP) concept. The TITAN-I fusion power core (FPC) is a lithium, self-cooled design with vanadium alloy (V-3Ti-1Si) structural material. The compact design of the TITAN fusion power core (FPC) reduces the system to a few small and relatively low mass components, making toroidal segmentation of the FPC unnecessary. A single-piece maintenance procedure in which the replaceable first wall and blanket is removed as a single unit is, therefore, possible. The TITAN FPC design provides for top access to the reactor with vertical lifts used to remove the components. The number of remote handling procedures is few and the movements are uncomplicated. The annual torus replacement requires that the reusable ohmic-heating coil set and hot-shield assembly be removed and temporarily stored in a hot cell. The used first wall and blanket assembly is drained and disconnected from the coolant supply system, then lifted to a processing room where it is cooled and prepared for Class-C waste burial. The new, pre-tested first wall and blanket assembly is then lowered into position and the removal procedure is reversed to complete the replacement process

Community structure and decadal changes in macrozoobenthic assemblages in Lake Poyang, the largest freshwater lake in China

Directory of Open Access Journals (Sweden)

Cai Y. J.

2014-01-01

Full Text Available Lake Poyang is the largest freshwater lake in China and contains unique and diverse biota within the Yangtze floodplain ecosystem. However, knowledge of its macrozoobenthic assemblages remains inadequate. To characterize the current community structure of these assemblages and to portray their decadal changes, quarterly investigations were conducted at 15 sites from February to November 2012. A total of 42 taxa were recorded, and Corbicula fluminea, Limnoperna fortunei, Gammaridae sp., Nephtys polybranchia, Polypedilum scalaenum and Branchiura sowerbyi were found to dominate the community in terms of abundance. The bivalves Corbicula fluminea, Lamprotula rochechouarti, Arconaia lanceolata and Lamprotula caveata dominated the community in biomass due to their large body size. The mean abundance of the total macrozoobenthos varied from 48 to 920 ind·m-2, the mean biomass ranged from 28 to 428 g·m-2. The substrate type affected strongly the abundance, biomass, and diversity of the macrozoobenthos, with muddy sand substrates showing the highest values. Compared with historical data, remarkable changes were observed in the abundance of macrozoobenthos and the identity of the dominant species. The mean total abundance decreased from 724 ind·m-2 in 1992 to 228 ind·m-2 in 2012. The dominant species have shifted dramatically. Large unionids were dominant before 1998, whereas pollution-tolerant species (e.g., Branchiura sowerbyi increased in dominance after 2008. Our findings should have implications for the conservation of the benthic biodiversity of this large Yangtze-connected lake.

Opportunities for biodiversity gains under the world's largest reforestation programme

Science.gov (United States)

Hua, Fangyuan; Wang, Xiaoyang; Zheng, Xinlei; Fisher, Brendan; Wang, Lin; Zhu, Jianguo; Tang, Ya; Yu, Douglas W.; Wilcove, David S.

2016-01-01

Reforestation is a critical means of addressing the environmental and social problems of deforestation. China's Grain-for-Green Program (GFGP) is the world's largest reforestation scheme. Here we provide the first nationwide assessment of the tree composition of GFGP forests and the first combined ecological and economic study aimed at understanding GFGP's biodiversity implications. Across China, GFGP forests are overwhelmingly monocultures or compositionally simple mixed forests. Focusing on birds and bees in Sichuan Province, we find that GFGP reforestation results in modest gains (via mixed forest) and losses (via monocultures) of bird diversity, along with major losses of bee diversity. Moreover, all current modes of GFGP reforestation fall short of restoring biodiversity to levels approximating native forests. However, even within existing modes of reforestation, GFGP can achieve greater biodiversity gains by promoting mixed forests over monocultures; doing so is unlikely to entail major opportunity costs or pose unforeseen economic risks to households. PMID:27598524

El Paso natural gas nearing completion of system's largest expansion

International Nuclear Information System (INIS)

Anon.

1992-01-01

El Paso Natural Gas Co.'s largest expansion program in its 64-year history will be completed along its northern system this spring or early summer. According to the company, the three-tiered, $241.5 million expansion program will increase El Paso's gas-transport capacity by 835 MMcfd to 2.5 bcfd of conventional and coal-seam gas from the San Juan basin in northwestern New Mexico. That's enough natural gas, says the company, to supply the needs of a city of more than 800,000 residents. This paper reports that the expansion involves the San Juan Triangle system, the company's northern main line, and the Permian-San Juan crossover line. The company also filed with the Federal Energy Regulatory Commission (FERC) in October 1991 to construct a new $15.2 million compressor station, Rio Vista, south of Bloomfield, N.M. The station would be used to move additional gas to the main line

Contamination Control Assessment of the World's Largest Space Environment Simulation Chamber

Science.gov (United States)

Snyder, Aaron; Henry, Michael W.; Grisnik, Stanley P.; Sinclair, Stephen M.

2012-01-01

The Space Power Facility s thermal vacuum test chamber is the largest chamber in the world capable of providing an environment for space simulation. To improve performance and meet stringent requirements of a wide customer base, significant modifications were made to the vacuum chamber. These include major changes to the vacuum system and numerous enhancements to the chamber s unique polar crane, with a goal of providing high cleanliness levels. The significance of these changes and modifications are discussed in this paper. In addition, the composition and arrangement of the pumping system and its impact on molecular back-streaming are discussed in detail. Molecular contamination measurements obtained with a TQCM and witness wafers during two recent integrated system tests of the chamber are presented and discussed. Finally, a concluding remarks section is presented.

Herbarium holographicum

Science.gov (United States)

Boone, Pierre

1990-06-01

The project "Herbarium Holographicum" in fact started from a holographic reaction of frustration, evoluated quite rapidly to a passionate search of "hologeny" of vegetal objects on one side, but also led to the search of symbolic significance of vegetals, to a trial to multiplicate holographically a historical collection of microscopic plant sections, to some efforts of demystification of holography by integrating pieces of Herbarium Holographicum in "normal everyday" objects, and finally to a project of a monumental piece of multimedia art that, when the sponsors are found, will become one of the largest holograms of the world.

Monster machines

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-01-15

The mining industry is renowned for its gigantic pieces of machinery and they do not come much bigger than the three pieces being examined in this paper. Most bucketwheel excavators delivered now are in the 1000-4500 m{sup 3}/h capacity range. Bucyras Inc. is responsible for the world's largest dragline, the Big Muskie, claimed to be one of the seven engineering wonders of the world. However, emphasis today is on smaller draglines such as the Bucyrus 680 W. Manufacturers of surface miners include Man Takraf, ThyssenKrupp Foerdertechnik, Wirtgen and the Huron Manufacturing Corp. 2 photos.

The Annuity Puzzle Remains a Puzzle

NARCIS (Netherlands)

Peijnenburg, J.M.J.; Werker, Bas; Nijman, Theo

We examine incomplete annuity menus and background risk as possible drivers of divergence from full annuitization. Contrary to what is often suggested in the literature, we find that full annuitization remains optimal if saving is possible after retirement. This holds irrespective of whether real or

Acute traumatic death of a 17th century general based on examination of mummified remains found in Korea.

Science.gov (United States)

Lee, In Sun; Lee, Eun-Joo; Park, Jun Bum; Baek, Seung Hee; Oh, Chang Seok; Lee, Soong Deok; Kim, Yi-Suk; Bok, Gi Dae; Hong, Jung Won; Lim, Do-Sun; Shin, Myung Ho; Seo, Min; Shin, Dong Hoon

2009-06-01

Recently, we examined one of the most perfectly preserved mummies of the Joseon Dynasty (1392-1910) ever found in Korea. The individual was an elderly man and a high-ranking general who had lived sometime during the 16th or 17th century in Korea. When computerized tomography (CT) radiographs were taken, a fracture line was observed on the left side of the mandible. A post-factum dissection also provided crucial clues to the cause of death. First of all, blood clots were still evident at the fracture site, indicating that the mandibular fracture had occurred just before death. Second, we also found feces exclusively in the sigmoid colon or rectum, but not in the stomach, small intestine or colon. This told us that our subject had not eaten anything during his final 2 days (even though there was no indication that he would have had any difficulty eating during that time). Therefore, we presume that this case might not be one of chronic or wasting disease, but rather a case of sudden death. By virtue of the varied specialties of the researchers involved in this study, we were able to piece together a partly very clear and partly very plausible story for our 17th century mummy subject. Considering the high level of preservation of remains and artifacts found in lime soil mixture barrier (LSMB) tombs, not to mention the rich supplementary information available from historical documents, similarly successful studies are promised in forthcoming days and years.

German Migrant Teachers in Australia: Insights into the Largest Cohort of Non-English Speaking Background Teachers

Science.gov (United States)

Bense, Katharina

2015-01-01

The research reported in this paper investigates the situation of German migrant teachers in Australia. Although German born teachers represent the largest group of non-English speaking background teachers in Australia, there is no study of the circumstances and experiences of these teachers in Australia. This study aims to fill this gap. It…

Juveniles' Motivations for Remaining in Prostitution

Science.gov (United States)

Hwang, Shu-Ling; Bedford, Olwen

2004-01-01

Qualitative data from in-depth interviews were collected in 1990-1991, 1992, and 2000 with 49 prostituted juveniles remanded to two rehabilitation centers in Taiwan. These data are analyzed to explore Taiwanese prostituted juveniles' feelings about themselves and their work, their motivations for remaining in prostitution, and their difficulties…

La traducción de la onomatopeya en el manga One Piece : tipología y técnicas

OpenAIRE

Pérez Álvaro, Laura

2017-01-01

Treball Final de Grau en Traducció i Interpretació. Codi: TI0983. Curs: 2015/2016 Este trabajo es un estudio de caso de la traducción de las onomatopeyas en el primer tomo del manga One Piece (Eiichiro Oda). El objetivo que se persigue con esta investigación es comprobar si la posición de las onomatopeyas en diferentes lugares de las páginas de un cómic, es decir, dentro o fuera de bocadillo de diálogo, influye en el método de traducción empleado. Los métodos que se incluyen...

Numerical simulation of water flow through the bottom en piece of a nuclear fuel assembly

International Nuclear Information System (INIS)

Navarro, Moyses A.; Santos, Andre A. Campagnole dos

2007-01-01

The water flow through the bottom nozzle of a nuclear fuel assembly was simulated using a commercial CFD code, CFX 10.0. Previously, simulations with a perforated plate similar to the bottom nozzle plate were performed to define the appropriate mesh refinement and turbulence model (κ-ε or SST). Subsequently, the numerical simulation was performed with the optimized mesh using the turbulence model (κ-ε in a standard bottom nozzle with some geometric simplifications. The numerical results were compared with experimental results to determine the pressure drop through the bottom nozzle in the Reynolds range from ∼10500 to ∼95000. The agreement between the numerical simulations and experimental results may be considered satisfactory. The study indicated that the CFD codes can play an important role in the development of pieces with complex geometries, optimizing the planning of the experiments and aiding in the experimental analysis. (author)

Pigment dispersion syndrome and pigmentary glaucoma after secondary sulcus transscleral fixation of single-piece foldable posterior chamber intraocular lenses in Chinese aphakic patients.

Science.gov (United States)

Tong, Nianting; Liu, Fuling; Zhang, Ting; Wang, Liangyu; Zhou, Zhanyu; Gong, Huimin; Yuan, Fuxiang

2017-05-01

To describe secondary pigment dispersion syndrome (PDS) and pigmentary glaucoma after secondary sulcus transscleral fixation of 1-piece hydrophobic acrylic foldable posterior chamber intraocular lenses (PC IOLs) in aphakic patients in a Chinese population. Department of Ophthalmology, Qingdao Municipal Hospital, Qingdao, China. Retrospective case series. This chart review included eyes that had secondary sulcus transscleral fixation of a 1-piece hydrophobic acrylic foldable PC IOL (Tecnis ZCB00) between March 2011 and March 2014. The patients' demographic data, clinical data, postoperative complications, intervals between initial surgery and the onset of PDS, pigmentary glaucoma occurrences, and findings on slitlamp biomicroscopy, gonioscopy, and ultrasound biomicroscopy (UBM) were recorded. The study comprised 23 consecutive eyes of 21 patients. Seventeen eyes of 16 patients were diagnosed with PDS, and 7 eyes of 6 patients were diagnosed with pigmentary glaucoma. The slitlamp examination and UBM showed that the location between the IOL optic and the posterior surface of the iris was very close. Slitlamp examination of the anterior chamber angle using a gonioscope showed dense pigment deposition on the IOL surfaces. A reverse pupillary block was found in 10 eyes of 9 patients. Other postoperative complications included intraocular hemorrhage, pupillary capture of the IOL optic, IOL tilt, IOL decentration, IOL dislocation, and suture erosion. The 1-piece hydrophobic acrylic foldable PC IOL was not suitable for sulcus transscleral fixation because of a high incidence of PDS and pigmentary glaucoma after surgery in a Chinese population. Copyright © 2017 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Revisiting the impacts of oil price increases on monetary policy implementation in the largest oil importers

Directory of Open Access Journals (Sweden)

Nurtac Yildirim

2015-06-01

Full Text Available The aim of this paper is to test the impacts of oil price increases on monetary policy implementation in the largest oil importers. For that purpose, we estimate structural vector error correction (SVEC models to show the impacts of oil price increases on industrial production, consumer prices and immediate interest rates which are the elements of Taylor rule for the four largest oil importers (the USA, the EU, China and Japan. Our results indicate that oil price increases transmit to output and inflation and lead to fluctuations in industrial production, consumer prices and immediate interest rates which in turn influence the monetary policy stance in the following periods. The basic conclusion of research is that the channels through which oil prices affect output, inflation and interest rates should be identified by the monetary policy authorities of the USA, the EU, China and Japan. We also emphasize the importance of the determination of the optimal monetary policy framework to eliminate the negative consequences of oil price increases.

Optimized design and structural mechanics of a single-piece composite helicopter driveshaft

Science.gov (United States)

Henry, Todd C.

In rotorcraft driveline design, single-piece composite driveshafts have much potential for reducing driveline mass and complexity over multi-segmented metallic driveshafts. The singlepiece shaft concept is enabled by the relatively high fatigue strain capacity of fiber reinforced polymer composites over metals. Challenges for single-piece driveshaft design lie in addressing the self-heating behavior of the composite due to the material damping, as well as, whirling stability, torsional buckling stability, and composite strength. Increased composite temperature due to self-heating reduces the composite strength and is accounted for in this research. The laminate longitudinal stiffness ( Ex) and strength (Fx) are known to be heavily degraded by fiber undulation, however, both are not well understood in compression. The whirling stability (a function of longitudinal stiffness) and the composite strength are strongly influential in driveshaft optimization, and thus are investigated further through the testing of flat and filament wound composite specimens. The design of single-piece composite driveshafts, however, needs to consider many failure criteria, including hysteresis-induced overheating, whirl stability, torsional buckling stability, and material failure by overstress. The present investigation uses multi-objective optimization to investigate the design space which visually highlights design trades. Design variables included stacking sequence, number of laminas, and number of hanger bearings. The design goals were to minimize weight and maximize the lowest factor of safety by adaptively generating solutions to the multi-objective problem. Several design spaces were investigated by examining the effect of misalignment, ambient temperature, and constant power transmission on the optimized solution. Several materials of interest were modeled using experimentally determined elastic properties and novel temperature-dependent composite strength. Compared to the

The largest deep-ocean silicic volcanic eruption of the past century.

Science.gov (United States)

Carey, Rebecca; Soule, S Adam; Manga, Michael; White, James; McPhie, Jocelyn; Wysoczanski, Richard; Jutzeler, Martin; Tani, Kenichiro; Yoerger, Dana; Fornari, Daniel; Caratori-Tontini, Fabio; Houghton, Bruce; Mitchell, Samuel; Ikegami, Fumihiko; Conway, Chris; Murch, Arran; Fauria, Kristen; Jones, Meghan; Cahalan, Ryan; McKenzie, Warren

2018-01-01

The 2012 submarine eruption of Havre volcano in the Kermadec arc, New Zealand, is the largest deep-ocean eruption in history and one of very few recorded submarine eruptions involving rhyolite magma. It was recognized from a gigantic 400-km 2 pumice raft seen in satellite imagery, but the complexity of this event was concealed beneath the sea surface. Mapping, observations, and sampling by submersibles have provided an exceptionally high fidelity record of the seafloor products, which included lava sourced from 14 vents at water depths of 900 to 1220 m, and fragmental deposits including giant pumice clasts up to 9 m in diameter. Most (>75%) of the total erupted volume was partitioned into the pumice raft and transported far from the volcano. The geological record on submarine volcanic edifices in volcanic arcs does not faithfully archive eruption size or magma production.

Chromatin immunoprecipitation improvements for the processing of small frozen pieces of adipose tissue.

Directory of Open Access Journals (Sweden)

Daniel Castellano-Castillo

Full Text Available Chromatin immunoprecipitation (ChIP has gained importance to identify links between the genome and the proteome. Adipose tissue has emerged as an active tissue, which secretes a wide range of molecules that have been related to metabolic and obesity-related disorders, such as diabetes, cardiovascular failure, metabolic syndrome, or cancer. In turn, epigenetics has raised the importance in discerning the possible relationship between metabolic disorders, lifestyle and environment. However, ChIP application in human adipose tissue is limited by several factors, such as sample size, frozen sample availability, high lipid content and cellular composition of the tissue. Here, we optimize the standard protocol of ChIP for small pieces of frozen human adipose tissue. In addition, we test ChIP for the histone mark H3K4m3, which is related to active promoters, and validate the performance of the ChIP by analyzing gene promoters for factors usually studied in adipose tissue using qPCR. Our improvements result in a higher performance in chromatin shearing and DNA recovery of adipocytes from the tissue, which may be useful for ChIP-qPCR or ChIP-seq analysis.

Genetics in arterial calcification: pieces of a puzzle and cogs in a wheel.

Science.gov (United States)

Rutsch, Frank; Nitschke, Yvonne; Terkeltaub, Robert

2011-08-19

Artery calcification reflects an admixture of factors such as ectopic osteochondral differentiation with primary host pathological conditions. We review how genetic factors, as identified by human genome-wide association studies, and incomplete correlations with various mouse studies, including knockout and strain analyses, fit into "pieces of the puzzle" in intimal calcification in human atherosclerosis, and artery tunica media calcification in aging, diabetes mellitus, and chronic kidney disease. We also describe in sharp contrast how ENPP1, CD73, and ABCC6 serve as "cogs in a wheel" of arterial calcification. Specifically, each is a minor component in the function of a much larger network of factors that exert balanced effects to promote and suppress arterial calcification. For the network to normally suppress spontaneous arterial calcification, the "cogs" ENPP1, CD73, and ABCC6 must be present and in working order. Monogenic ENPP1, CD73, and ABCC6 deficiencies each drive a molecular pathophysiology of closely related but phenotypically different diseases (generalized arterial calcification of infancy (GACI), pseudoxanthoma elasticum (PXE) and arterial calcification caused by CD73 deficiency (ACDC)), in which premature onset arterial calcification is a prominent but not the sole feature.

Significant human impact on the flux and δ(34)S of sulfate from the largest river in North America.

Science.gov (United States)

Killingsworth, Bryan A; Bao, Huiming

2015-04-21

Riverine dissolved sulfate (SO4(2-)) flux and sulfur stable isotope composition (δ(34)S) yield information on the sources and processes affecting sulfur cycling on different spatial and temporal scales. However, because pristine preindustrial natural baselines of riverine SO4(2-) flux and δ(34)S cannot be directly measured, anthropogenic impact remains largely unconstrained. Here we quantify natural and anthropogenic SO4(2-) flux and δ(34)S for North America's largest river, the Mississippi, by means of an exhaustive source compilation and multiyear monitoring. Our data and analysis show that, since before industrialization to the present, Mississippi River SO4(2-) has increased in flux from 7.0 to 27.8 Tg SO4(2-) yr(-1), and in mean δ(34)S from -5.0‰, within 95% confidence limits of -14.8‰ to 4.1‰ (assuming normal distribution for mixing model input parameters), to -2.7 ± 1.6‰, reflecting an impressive footprint of bedrocks particular to this river basin and human activities. Our first-order modern Mississippi River sulfate partition is 25 ± 6% natural and 75% ± 6% anthropogenic sources. Furthermore, anthropogenic coal usage is implicated as the dominant source of modern Mississippi River sulfate, with an estimated 47 ± 5% and 13% of total Mississippi River sulfate due to coal mining and burning, respectively.

Benchmark Testing of the Largest Titanium Aluminide Sheet Subelement Conducted

Science.gov (United States)

Bartolotta, Paul A.; Krause, David L.

2000-01-01

To evaluate wrought titanium aluminide (gamma TiAl) as a viable candidate material for the High-Speed Civil Transport (HSCT) exhaust nozzle, an international team led by the NASA Glenn Research Center at Lewis Field successfully fabricated and tested the largest gamma TiAl sheet structure ever manufactured. The gamma TiAl sheet structure, a 56-percent subscale divergent flap subelement, was fabricated for benchmark testing in three-point bending. Overall, the subelement was 84-cm (33-in.) long by 13-cm (5-in.) wide by 8-cm (3-in.) deep. Incorporated into the subelement were features that might be used in the fabrication of a full-scale divergent flap. These features include the use of: (1) gamma TiAl shear clips to join together sections of corrugations, (2) multiple gamma TiAl face sheets, (3) double hot-formed gamma TiAl corrugations, and (4) brazed joints. The structural integrity of the gamma TiAl sheet subelement was evaluated by conducting a room-temperature three-point static bend test.

The largest forest fires in Portugal: the constraints of burned area size on the comprehension of fire severity.

Science.gov (United States)

Tedim, Fantina; Remelgado, Ruben; Martins, João; Carvalho, Salete

2015-01-01

Portugal is a European country with highest forest fires density and burned area. Since beginning of official forest fires database in 1980, an increase in number of fires and burned area as well as appearance of large and catastrophic fires have characterized fire activity in Portugal. In 1980s, the largest fires were just a little bit over 10,000 ha. However, in the beginning of 21st century several fires occurred with a burned area over 20,000 ha. Some of these events can be classified as mega-fires due to their ecological and socioeconomic severity. The present study aimed to discuss the characterization of large forest fires trend, in order to understand if the largest fires that occurred in Portugal were exceptional events or evidences of a new trend, and the constraints of fire size to characterize fire effects because, usually, it is assumed that larger the fire higher the damages. Using Portuguese forest fire database and satellite imagery, the present study showed that the largest fires could be seen at the same time as exceptional events and as evidence of a new fire regime. It highlighted the importance of size and patterns of unburned patches within fire perimeter as well as heterogeneity of fire ecological severity, usually not included in fire regime description, which are critical to fire management and research. The findings of this research can be used in forest risk reduction and suppression planning.

The 100-C-7 Remediation Project. An Overview of One of DOE's Largest Remediation Projects - 13260

International Nuclear Information System (INIS)

Post, Thomas C.; Strom, Dean; Beulow, Laura

2013-01-01

The U.S. Department of Energy Richland Operations Office (RL), U.S. Environmental Protection Agency (EPA) and Washington Closure Hanford LLC (WCH) completed remediation of one of the largest waste sites in the U.S. Department of Energy complex. The waste site, 100-C-7, covers approximately 15 football fields and was excavated to a depth of 85 feet (groundwater). The project team removed a total of 2.3 million tons of clean and contaminated soil, concrete debris, and scrap metal. 100-C-7 lies in Hanford's 100 B/C Area, home to historic B and C Reactors. The waste site was excavated in two parts as 100-C-7 and 100-C-7:1. The pair of excavations appear like pit mines. Mining engineers were hired to design their tiered sides, with safety benches every 17 feet and service ramps which allowed equipment access to the bottom of the excavations. The overall cleanup project was conducted over a span of almost 10 years. A variety of site characterization, excavation, load-out and sampling methodologies were employed at various stages of remediation. Alternative technologies were screened and evaluated during the project. A new method for cost effectively treating soils was implemented - resulting in significant cost savings. Additional opportunities for minimizing waste streams and recycling were identified and effectively implemented by the project team. During the final phase of cleanup the project team applied lessons learned throughout the entire project to address the final, remaining source of chromium contamination. The C-7 cleanup now serves as a model for remediating extensive deep zone contamination sites at Hanford. (authors)

Influence of use of ultrasound on metallographic structure of plated pieces by welding in ultrasonic field

Directory of Open Access Journals (Sweden)

Gh. Amza

2015-07-01

Full Text Available To optimize the plating process is necessary to know the behavior of surfaces plated during the exploitation and in particular susceptibility to cracking, the formation of cracks from the inside to outside or reverse, embrittlement in the heat affected zone. Research has been realized considering several samples plated by welding without ultrasonic activation and with ultrasonic activation, and these samples were made of AISI 4130 steel, and as filler material was used Inconel 625 Fe developed as electrode wire ø 1,2 / mm. The plating process was realized by a WIG welding process in Ar100 /% environment with non-consumable tungsten electrode, in two versions, respectively with and without the use of ultrasonic energy. Four pieces played by welding there were analyzed the metallographies structure in the base material, the deposited material and the material from the heat affected zone.

Analysis of axial behavior of three piece oil control ring; Kumiawase oil ring no jikuhoko kyodo no kaiseki

Energy Technology Data Exchange (ETDEWEB)

Tateishi, Y; Fujimura, K; Hitosugi, H [Nippon Piston Ring Co. Ltd., Tokyo (Japan)

1997-10-01

It is considered that the reduction of oil control ring tension is a major problem in reducing the friction-loss of internal combustion engines. The authors have successfully developed a calculating method for the axial behavior prediction of a three piece type oil control ring as a method used in reduction of lube-oil consumption when lower tension ring is used. By means of the method, the authors found that the effect in reduction of lube-oil consumption was able to be expected by optimizing design parameters of the oil ring, the tension and the seating tab angle of expander-spacer, and the gas pressure on the 3rd land. 3 refs., 14 figs.

Purposefulness as construed by M.A. Krąpiec, S. Mazierski and A. Maryniarczyk

Directory of Open Access Journals (Sweden)

Krzysztof Kruk

2016-07-01

Full Text Available One position on the interpretation of purposefulness adopted by Neo-Thomists (in this case Czesław Biedulski says that the principle of purposefulness has universal significance, because it concerns every entity that can be defined by the term “action”: i.e. every entity which exists and can only be known through some form of action (in accordance with its nature. Entities work to preserve their existence, and their pursuit of survival seems to be the purpose of their actions. So, if entities are already working, then they must also be working purposefully. We can encounter philosophers who hold that every action is purposeful in the representatives of the Lublin School, such as M.A. Krąpiec OP, A. Maryniarczyk, S. Mazierski. All three of these have based their views about purposefulness on Aristotle’s teleological considerations. The present article will examine how the views of the abovementioned scholars on teleology, based on Aristotle’s philosophy of purposefulness from 2000 years ago, explain reality.

Going nuts: Measuring free-fall acceleration by analyzing the sound of falling metal pieces

Science.gov (United States)

Kuhn, Jochen; Vogt, Patrik; Theilmann, Florian

2016-03-01

Galilei presented the kinematics of a one-dimensional accelerated motion with ease and in terms of elegant geometry. Moreover, he believed, "Philosophy [i.e. physics] is written in this grand book—I mean the universe—which stands continually open to our gaze, but it cannot be understood unless one first learns to comprehend the language and interpret the characters in which it is written. It is written in the language of mathematics, and its characters are triangles, circles, and other geometrical figures, without which it is humanly impossible to understand a single word of it." In classroom practice, however, it can be difficult to reveal this mathematical heart of nature; free fall and other accelerated motions often get obscured by friction or other sources of errors. In this paper, we introduce a method of analyzing free-fall motion indirectly by evaluating the noise of freely falling metal pieces. The method connects a deeper understanding of the mathematical structure of accelerated motion with the possibility to derive a numerical value for the free-fall acceleration g.

RETAINED STONE PIECE IN ANTERIOR CHAMBER

Directory of Open Access Journals (Sweden)

ZvornicaninJasmin, Nadarevic-VodencarevicAmra

2015-04-01

Full Text Available ABSTRACT We read with interest the article by Surekha et al. regarding the retained stone piece in anterior chamber. Similar to the results of previous studies, the authors found that delayed intraocular foreign body (IOFB management can result in good visual outcome without an apparent increased risk of endophthalmitis or other deleterious side effects. However, the authors failed to explain the exact reason for the diminution of vision in patients left eye. It is unclear what the uncorrected visual acuity was and what kind of correction was used, more precisely type and amount of cylinder, given the presence of the corneal opacity. Since the size of the IOFB is approximately 4x4x1mm, significant irido-corneal angle changes resulting in intraocular pressure raise and optic nerve head damage can be expected. Traumatic glaucoma following open globe injury can occur in 2.7 to 19% of cases, with several risk factors associated with glaucoma development (advanced age, poor visual acuity at presentation,perforating rather than penetrating ocular injury,lens injury, presence of vitreous hemorrhage and presence of an IOFB. Earlier reportsof latetraumaticoptic neuropathy onset, even after several years, indicate that this possibility cannot be completely ruled out too. Therefore, repeated intraocular pressure measurements, gonioscopy, pupillary reaction assessment, together with through posterior segment examination including visual field and optical coherence tomography examinations can be useful in determining the possible optic nerve damage as one of the possible reasons for visual acuity reduction. The authors did not suggest any operative treatment at this time. However, it should bear in mind that the inert anterior chamber IOFB could be a risk factor for non-infectious endophthalmitis development even after many years. Also, long term retained anterior chamber foreign body leads to permanent endothelial cell loss and can even result in a corneal

Dying piece by piece: carbohydrate dynamics in aspen seedlings under severe carbon stress and starvation

Science.gov (United States)

Wiley, Erin; Chow, Pak; Landhäusser, Simon

2016-04-01

Carbon stress and starvation remain poorly understood in trees, despite their potential role in mortality from a variety of agents. To explore the effects of carbon stress on nonstructural carbohydrate (NSC) dynamics and recovery potential and to examine the process of starvation, we grew aspen seedlings under one of three levels of shade: 40% (light shade), 8% (medium shade), and 4% (dark shade) of full sunlight. We then exposed seedlings to 24 hours darkness at either 20° or 28° C until trees had died. Periodically, seedlings were harvested for NSC analysis and to measure stem and root respiration. In addition, some seedlings were moved back into the light to determine if recovery was possible at certain points during starvation. Specifically, we sought to address the following questions: 1) Do NSC concentrations or mass influence tree survival under carbon stress? 2) At what carbohydrate levels do trees fail to recover and starve? 3) Does temperature affect the NSC level at which trees starve? Increasing shade reduced growth, but surprisingly did not reduce NSC levels, except in a portion of deep shade seedlings that experienced dieback. Once in darkness, leaves died first, with final NSC levels ranging from ~4% (Medium shade, 28 degrees) to 7.5% (Light shade). Stem death generally occurred gradually down the stem. Stem tissues retained ~1-2% NSC when dead. Recovery was still possible when only the upper half of the stem had died; at this point, seedlings had relatively high root NSC levels in their remaining roots (7-10%), with 1-3% starch. No trees recovered after the whole stem had died, at which point, some trees root systems were completely dead. However, most retained substantial amounts of live roots, averaging 5-6% NSC, with 0.25-1.5% starch. Despite the initially similar NSC concentrations, light shade seedlings took longer to reach half stem and whole stem death than seedlings from medium and dark shade. Longer survival times were associated with

WISMUT AG: Past, present and future of the largest uranium producer in Europe

International Nuclear Information System (INIS)

Madel, J.

1990-01-01

The author gives a brief summary of WISMUT AG the largest uranium producer operating in Europe. The jointly owned German-Soviet company operates its production facilities in the southern part of the former German Democratic Republic. Given the new political and economic frame in Germany and the Soviet Union WISMUT AG will receive due recognition. Uranium exploration, mining, and milling activities are summarized from 1946-1989, and a summary of present activities and projections of future activities in the area of decontamination, restoration, and recultivation of present and abandoned mining and milling sites are noted. A statement of WISMUT AG's projected role in the international nuclear fuels market is made

THE EVOLUTION OF THE WORLD’S LARGEST AUTOMAKERS IN THE PERIOD 2013-2014

Directory of Open Access Journals (Sweden)

Sorin-George TOMA

2015-04-01

Full Text Available The automotive industry has always represented an economic engine for many countries. It is dealing with the design, development, manufacture, marketing, and sale of the motor vehicles. Nowadays, this industry is full of intense competition between big auto groups fighting for higher profits and larger market shares. The key players in the automotive market are operating at a global scale in a highly competitive environment. In the last years, Toyota Motor and Volkswagen Group have proved to be the main competitors. The aim of our paper is to analyze the evolution of the world’s largest automakers in the period 2013-2014. The research type is literature review.

An analysis of audit committee effectiveness at the largest listed companies in South Africa from a CFO and audit committee perspective

Directory of Open Access Journals (Sweden)

Ben Marx

2009-12-01

Full Text Available Purpose: The purpose of the study is to investigate and analyse the effective functioning of audit committees at the largest listed companies in South Africa. Problem investigated: The modern audit committee is often seen as the panacea of the corporate world and as such is looked upon to cure all the financial reporting and control-related problems of entities. Audit committees are, however, not always as effective as they are held to be, as is evidenced by the many well-known corporate scandals and business failures that occurred where audit committees existed and fraudulent financial reporting, audit failures, internal control breakdowns and other irregularities prevailed. The modern audit committee will be of value only if it is properly constituted, is functioning effectively and if its role is clearly understood by all the parties concerned. The research problem investigated stems precisely from this issue, and the paper therefore aims to analyse the effective functioning of the audit committees at the largest listed companies in South Africa. Methodology: The study empirically tested the audit committee practices at the largest listed companies in South Africa. This was done through questionnaires addressed to the CFOs and audit committee chairs. Findings: The study found that audit committees at the largest listed companies in South Africa are well established, properly constituted, have the authority and resources to effectively discharge their responsibilities and consist of members who act independently and who have the right mix of appropriate experience, financial literacy and financial expertise amongst their members. The audit committee's role was found to be generally well understood and supported by the board and the Chief Financial Officers. It was further found that the audit committees are effective in discharging their oversight responsibilities on the board's behalf, with the only real exception being their effectiveness

The largest Fresco in Europe on cooling tower of nuclear power station of Cruas Meysse in Ardeche, France

International Nuclear Information System (INIS)

Di Mayo, J.L.

1993-01-01

The Nuclear Power Station Cruas Meysse is on the most important communication way of France, in the Rhone Valley, between the Rhin and the Mediterranean Sea. In the South of the Rhone Valley, the Nuclear Power Plant is situated near the very important site of 'Tricastin', the largest nuclear area in France. Cruas Meysse has a very good integration to the economy, social, and cultural scheme ; that's why EDF and the Ardeche Department had enter into partnership to associate art and technology of our time, and offer a work for everybody - 'Le Verseau' is the largest fresco in Europe - It gives a gigantic signalling system to the Ardeche Department, because the Nuclear Power Station has a very interesting position, close the motor way A7, the National 7 road, and the way of high speed train (TGV) an another symbol of the high French technology

Design of the connection pieces between concrete and valves of the cooling water system in the Angra I NPP turbine building

International Nuclear Information System (INIS)

Diaz, B.E.; Carvalho, L.J. de

1988-01-01

This work describes the design characteristics of the Transition Pieces between concrete galleries and valves of the Cooling Water System of the Turbine Building of the Angra NPP-Unit I. Design details concerning the structure and procedures for the structural analysis are presented. It is emphasized that the usual simplified design rules for the flange and bolts can not be used in the case of non existent polar symmetry for the structure and applied loads. A more sophisticated design based on finite elements models is required in these cases. (author) [pt

Approaching the largest ‘API’: extracting information from the Internet with Python

Directory of Open Access Journals (Sweden)

Jonathan E. Germann

2018-02-01

Full Text Available This article explores the need for libraries to algorithmically access and manipulate the world’s largest API: the Internet. The billions of pages on the ‘Internet API’ (HTTP, HTML, CSS, XPath, DOM, etc. are easily accessible and manipulable. Libraries can assist in creating meaning through the datafication of information on the world wide web. Because most information is created for human consumption, some programming is required for automated extraction. Python is an easy-to-learn programming language with extensive packages and community support for web page automation. Four packages (Urllib, Selenium, BeautifulSoup, Scrapy in Python can automate almost any web page for all sized projects. An example warrant data project is explained to illustrate how well Python packages can manipulate web pages to create meaning through assembling custom datasets.

Complex PTSD and phased treatment in refugees: a debate piece

Directory of Open Access Journals (Sweden)

F. Jackie June ter Heide

2016-02-01

Full Text Available Background: Asylum seekers and refugees have been claimed to be at increased risk of developing complex posttraumatic stress disorder (complex PTSD. Consequently, it has been recommended that refugees be treated with present-centred or phased treatment rather than stand-alone trauma-focused treatment. This recommendation has contributed to a clinical practice of delaying or waiving trauma-focused treatment in refugees with PTSD. Objective: The aim of this debate piece is to defend two theses: (1 that complex trauma leads to complex PTSD in a minority of refugees only and (2 that trauma-focused treatment should be offered to all refugees who seek treatment for PTSD. Methods: The first thesis is defended by comparing data on the prevalence of complex PTSD in refugees to those in other trauma-exposed populations, using studies derived from a systematic review. The second thesis is defended using conclusions of systematic reviews and a meta-analysis of the efficacy of psychotherapeutic treatment in refugees. Results: Research shows that refugees are more likely to meet a regular PTSD diagnosis or no diagnosis than a complex PTSD diagnosis and that prevalence of complex PTSD in refugees is relatively low compared to that in survivors of childhood trauma. Effect sizes for trauma-focused treatment in refugees, especially narrative exposure therapy (NET and culturally adapted cognitive-behaviour therapy (CA-CBT, have consistently been found to be high. Conclusions: Complex PTSD in refugees should not be assumed to be present on the basis of complex traumatic experiences but should be carefully diagnosed using a validated interview. In line with treatment guidelines for PTSD, a course of trauma-focused treatment should be offered to all refugees seeking treatment for PTSD, including asylum seekers.

Weight reductions for the airbus A380; postbuckling of the A380 VTP skin panels

NARCIS (Netherlands)

Kroese, R.

2014-01-01

The skin panels of the Vertical Tail Plane (VTP) are the largest single piece composite components assembled on the Airbus A380. By allowing postbuckling to these skin panels might result in severe weight reductions for the VTP of the A380. The goal of the study is to give an indication of possible

Forensic considerations when dealing with incinerated human dental remains.

Science.gov (United States)

Reesu, Gowri Vijay; Augustine, Jeyaseelan; Urs, Aadithya B

2015-01-01

Establishing the human dental identification process relies upon sufficient post-mortem data being recovered to allow for a meaningful comparison with ante-mortem records of the deceased person. Teeth are the most indestructible components of the human body and are structurally unique in their composition. They possess the highest resistance to most environmental effects like fire, desiccation, decomposition and prolonged immersion. In most natural as well as man-made disasters, teeth may provide the only means of positive identification of an otherwise unrecognizable body. It is imperative that dental evidence should not be destroyed through erroneous handling until appropriate radiographs, photographs, or impressions can be fabricated. Proper methods of physical stabilization of incinerated human dental remains should be followed. The maintenance of integrity of extremely fragile structures is crucial to the successful confirmation of identity. In such situations, the forensic dentist must stabilise these teeth before the fragile remains are transported to the mortuary to ensure preservation of possibly vital identification evidence. Thus, while dealing with any incinerated dental remains, a systematic approach must be followed through each stage of evaluation of incinerated dental remains to prevent the loss of potential dental evidence. This paper presents a composite review of various studies on incinerated human dental remains and discusses their impact on the process of human identification and suggests a step by step approach. Copyright © 2014 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Inventarisasi Sarana Dan Prasarana Obyek Wisata Di Kota Banjarmasin

Directory of Open Access Journals (Sweden)

Noor Hidayah Pujianti

2017-10-01

Full Text Available This article aims to identify, classify and mapping facilities and infrastructure of tourism objects in the city of Banjarmasin. Primary data collection techniques using survey methods, interviews, documentation, and literature study. Secondary data obtained from Tourism Department of Art and Culture and Culture and Tourism Office of South Kalimantan Province. Data analysis technique used is spatial analysis. This study used descriptive qualitative method. The results showed that the facilities and infrastructure of tourism objects in Banjarmasin City for basic facilities, supplementary facilities, and the largest supporting facilities is restaurant / restaurant with the number of 26 pieces or 41.27%, the smallest is the tourist transport and cinema building with each amount 1 fruit or 1.51%. Public infrastructure and public utilities in Banjarmasin are the largest ATMs / Banks with 7 units or 30.43%, the smallest is the power station, the provision of clean water, seaports, and communication facilities with each amounted to 1 piece or 4 , 35%. Keywords: Facilities, Infrastructure, Tourism Objects   http://dx.doi.org/10.17977/um022v2i12017p046

An alternate end design for SSC dipoles

International Nuclear Information System (INIS)

Peters, C.; Caspi, S.; Taylor, C.

1989-02-01

Experience in the SSC dipole program has shown that fabrication of cylindrical coil ends is difficult. Cable stiffness requires large forces to maintain the proper position of the conductors in the end during winding. After winding, the coil ends remain distorted nd significant motion of the need conductors is required to force the coil end into the molding cavity. Local mechanical stresses are high during this process and extra pieces of insulation are required to prevent turn-to-turn shorts from developing during the winding and molding steps. Prior to assembly the coil end is compressed in a mold cavity and injected with a filler material to correct surface irregularities and fill voids in the end. LBL has developed an alternate design which permits the conductors to be wound over the end using minimal force and technician coerosion. The conductors are placed on a conical surface where the largest diameter over the outer layer conductors is 10 cm. No coil end spaces or insulation pieces between turns are required. The conductor geometry was analytically optimized to meet SSC multipole requirements for the ends. The first 1-m dipole utilizing this end geometry has been constructed and successfully tested. Design and construction data are presented. Also model test results, including training and multipole measurements of the end are given. 1 ref., 12 figs., 3 tabs

Mauna Loa--history, hazards and risk of living with the world's largest volcano

Science.gov (United States)

Trusdell, Frank A.

2012-01-01

Mauna Loa on the Island Hawaiʻi is the world’s largest volcano. People residing on its flanks face many hazards that come with living on or near an active volcano, including lava flows, explosive eruptions, volcanic smog, damaging earthquakes, and local tsunami (giant seawaves). The County of Hawaiʻi (Island of Hawaiʻi) is the fastest growing County in the State of Hawaii. Its expanding population and increasing development mean that risk from volcano hazards will continue to grow. U.S. Geological Survey (USGS) scientists at the Hawaiian Volcano Observatory (HVO) closely monitor and study Mauna Loa Volcano to enable timely warning of hazardous activity and help protect lives and property.

Development of a remaining lifetime management system for NPPS

International Nuclear Information System (INIS)

Galvan, J.C.; Regano, M.; Hevia Ruperez, F.

1994-01-01

The interest evinced by Spain nuclear power plants in providing a tool to support remaining lifetime management led to UNESA's application to OCIDE in 1992, and the latter's approval, for financing the project to develop a Remaining Lifetime Evaluation System for LWR nuclear power plants. This project is currently being developed under UNESA leadership, and the collaboration of three Spanish engineering companies and a research centre. The paper will describe its objectives, activities, current status and prospects. The project is defined in two phases, the first consisting of the identification and analysis of the main ageing phenomena and their significant parameters and specification of the Remaining Lifetime Evaluation System (RLES), and the second implementation of a pilot application of the RLES to verify its effectiveness. (Author)

Largest baleen whale mass mortality during strong El Niño event is likely related to harmful toxic algal bloom

Directory of Open Access Journals (Sweden)

Verena Häussermann

2017-05-01

Full Text Available While large mass mortality events (MMEs are well known for toothed whales, they have been rare in baleen whales due to their less gregarious behavior. Although in most cases the cause of mortality has not been conclusively identified, some baleen whale mortality events have been linked to bio-oceanographic conditions, such as harmful algal blooms (HABs. In Southern Chile, HABs can be triggered by the ocean–atmosphere phenomenon El Niño. The frequency of the strongest El Niño events is increasing due to climate change. In March 2015, by far the largest reported mass mortality of baleen whales took place in a gulf in Southern Chile. Here, we show that the synchronous death of at least 343, primarily sei whales can be attributed to HABs during a building El Niño. Although considered an oceanic species, the sei whales died while feeding near to shore in previously unknown large aggregations. This provides evidence of new feeding grounds for the species. The combination of older and newer remains of whales in the same area indicate that MMEs have occurred more than once in recent years. Large HABs and reports of marine mammal MMEs along the Northeast Pacific coast may indicate similar processes in both hemispheres. Increasing MMEs through HABs may become a serious concern in the conservation of endangered whale species.

Co-seismic slip, post-seismic slip, and largest aftershock associated with the 1994 Sanriku-haruka-oki, Japan, earthquake

Science.gov (United States)

Yagi, Yuji; Kikuchi, Masayuki; Nishimura, Takuya

2003-11-01

We analyzed continuous GPS data to investigate the spatio-temporal distribution of co-seismic slip, post-seismic slip, and largest aftershock associated with the 1994 Sanriku-haruka-oki, Japan, earthquake (Mw = 7.7). To get better resolution for co-seismic and post-seismic slip distribution, we imposed a weak constraint as a priori information of the co-seismic slip determined by seismic wave analyses. We found that the post-seismic slip during 100 days following the main-shock amount to as much moment release as the main-shock, and that the sites of co-seismic slip and post-seismic slip are partitioning on a plate boundary region in complimentary fashion. The major post-seismic slip was triggered by the mainshock in western side of the co-seismic slip, and the extent of the post-seismic slip is almost unchanged with time. It rapidly developed a shear stress concentration ahead of the slip area, and triggered the largest aftershock.

Investigation of Science Faculty with Education Specialties within the Largest University System in the United States

OpenAIRE

Bush, Seth D; Pelaez, Nancy; Rudd, James A, II; Stevens, Michael T; Tanner, Kimberly D; Williams, Kathy, PhD

2011-01-01

Efforts to improve science education include university science departments hiring Science Faculty with Education Specialties (SFES), scientists who take on specialized roles in science education within their discipline. Although these positions have existed for decades and may be growing more common, few reports have investigated the SFES approach to improving science education. We present comprehensive data on the SFES in the California State University (CSU) system, the largest university ...

Mapping Dynamics of Inundation Patterns of Two Largest River-Connected Lakes in China: A Comparative Study

OpenAIRE

Guiping Wu; Yuanbo Liu

2016-01-01

Poyang Lake and Dongting Lake are the two largest freshwater lakes in China. The lakes are located approximately 300 km apart on the middle reaches of the Yangtze River and are differently connected through their respective tributary systems, which will lead to different river–lake water exchanges and discharges. Thus, differences in their morphological and hydrological conditions should induce individual lake spatio-temporal inundation patterns. Quantitative comparative analyses of the dynam...

Prostate Cancer Screening in Jamaica: Results of the Largest National Screening Clinic Prostate Cancer Screening in Jamaica: Results of the Largest National Screening Clinic

International Nuclear Information System (INIS)

Morrison, B. F.; Aiken, W.; Mayhew, R.; Gordon, Y.; Reid, M.

2016-01-01

Prostate cancer is highly prevalent in Jamaica and is the leading cause of cancer-related deaths. Our aim was to evaluate the patterns of screening in the largest organized screening clinic in Jamaica at the Jamaica Cancer Society. A retrospective analysis of all men presenting for screening at the Jamaica Cancer Society from 1995 to 2005 was done. All patients had digital rectal examinations (DRE) and prostate specific antigen (PSA) tests done. Results of prostate biopsies were noted. 1117 men of mean age 59.9 ± 8.2 years presented for screening. The median documented PSA was 1.6 ng/mL (maximum of 5170 ng/mL). Most patients presented for only 1 screen. There was a gradual reduction in the mean age of presentation for screening over the period. Prostate biopsies were requested on 11% of screening visits; however, only 59% of these were done. 5.6% of all persons screened were found to have cancer. Of the cancers diagnosed, Gleason 6 adenocarcinoma was the commonest grade and median PSA was 8.9 ng/mL (range 1.5-1059 ng/mL). Older men tend to screen for prostate cancer in Jamaica. However, compliance with regular maintenance visits and requests for confirmatory biopsies are poor. Screening needs intervention in the Jamaican population.

The Determinants of Bank Internationalisation in Times of Financial Globalisation: Evidence from the World's Largest Banks (1980-2007)

NARCIS (Netherlands)

Westerhuis, Gerarda; Mulder, Arjen

2015-01-01

This article analyses the determinants of bank internationalisation, of the world's largest banks from the period 1980–2007. The purpose of the article is twofold. First, we show how a mixed-methods research design, in which we combine a variables-based research with three case studies, can

Immediate prostheses on one-piece trans-mucosal implants in flapless surgical procedures Case Series Report. Part I: full arch rehabilitations

Directory of Open Access Journals (Sweden)

Aris Petros Tripodakis

2012-06-01

Full Text Available Aim: The aim of the present case series report is to illustrate a clinical technique and present the application of onepiece transmucosal implants in flapless surgical procedures, supporting full arch immediate prostheses. Materials and methods: A total of 294 implants (Xive TG, Friadent, Germany have been used to support full arch immediate prostheses, over the last six years and have been in function for at least one year. The surgical placement of five or more implants per case involved immediate extraction and intrasocket flapless placement, combined with minimal flap elevation in the areas of healed extraction sites (43 mandibular and 7 maxillary arches. In all cases immediate provisionalization followed. Detailed three-dimensional cone-beam localized volumetric tomography preceeded the surgical procedures. The delivery of the final ceramo-metal prostheses was accomplished within a 20 day period. Materials and methods: Results Six implants failed to osseointegrate. All other implants are still successfully bearing the final prosthesis for the time that they have been followed. Soft tissue reaction was favorable from both the biologic and esthetic point of view. Conclusion: The flapless placement of one piece implants into edentulous healed sites is a predictable procedure in the presence of abundance of supporting bone as confirmed by 3-D imaging. On the other hand, immediate extraction placement of one piece implants allows the engagement of sound bone located deeper into the socket and provides adequate mechanical support of the soft tissue architecture that is preserved predictably. In all cases the prosthetic procedures are accomplished without disturbing the hardsoft tissue interface as the abutment-prosthesis interface is coronally elevated by the virtual design of the implant.

South Dakota State University's Library: A History. Hilton M. Briggs Library Occasional Paper Number 1.

Science.gov (United States)

Brown, Philip

Tracing the history of South Dakota State University's Hilton M. Briggs Library over the past 102 years, this occasional paper describes the development of what is now the largest library (over 1.1 million total pieces) in the South Dakota Library Network from its inception as part of a small land grant college. Administrative eras are reviewed,…

76 FR 36961 - Standards and Specifications for Timber Products Acceptable for Use by Rural Utilities Service...

Science.gov (United States)

2011-06-24

... borrowers six months to notify treating plants about poles not meeting the required preservative retention... length of a piece shall not exceed twice the size of the largest knot permitted. More than one knot of... pockets in 10-foot arms. Elsewhere a maximum of six medium pockets in 8-foot arms and eight in 10-foot...

Remaining life assessment of a high pressure turbine rotor

International Nuclear Information System (INIS)

Nguyen, Ninh; Little, Alfie

2012-01-01

This paper describes finite element and fracture mechanics based modelling work that provides a useful tool for evaluation of the remaining life of a high pressure (HP) steam turbine rotor that had experienced thermal fatigue cracking. An axis-symmetrical model of a HP rotor was constructed. Steam temperature, pressure and rotor speed data from start ups and shut downs were used for the thermal and stress analysis. Operating history and inspection records were used to benchmark the damage experienced by the rotor. Fracture mechanics crack growth analysis was carried out to evaluate the remaining life of the rotor under themal cyclic loading conditions. The work confirmed that the fracture mechanics approach in conjunction with finite element modelling provides a useful tool for assessing the remaining life of high temperature components in power plants.

Tissue Damage, Temperature, and pH Induced by Different Electrode Arrays on Potato Pieces (Solanum tuberosum L.

Directory of Open Access Journals (Sweden)

Maraelys Morales González

2018-04-01

Full Text Available One of the most challenging problems of electrochemical therapy is the design and selection of suitable electrode array for cancer. The aim is to determine how two-dimensional spatial patterns of tissue damage, temperature, and pH induced in pieces of potato (Solanum tuberosum L., var. Mondial depend on electrode array with circular, elliptical, parabolic, and hyperbolic shape. The results show the similarity between the shapes of spatial patterns of tissue damage and electric field intensity, which, like temperature and pH take the same shape of electrode array. The adequate selection of suitable electrodes array requires an integrated analysis that involves, in a unified way, relevant information about the electrochemical process, which is essential to perform more efficiently way the therapeutic planning and the personalized therapy for patients with a cancerous tumor.

Postmortem Scavenging of Human Remains by Domestic Cats

Directory of Open Access Journals (Sweden)

Ananya Suntirukpong, M.D.

2017-11-01

Full Text Available Objective: Crime scene investigators, forensic medicine doctors and pathologists, and forensic anthropologists frequently encounter postmortem scavenging of human remains by household pets. Case presentation: The authors present a case report of a partially skeletonized adult male found dead after more than three months in his apartment in Thailand. The body was in an advanced stage of decomposition with nearly complete skeletonization of the head, neck, hands, and feet. The presence of maggots and necrophagous (flesh eating beetles on the body confirmed that insects had consumed much of the soft tissues. Examination of the hand and foot bones revealed canine tooth puncture marks. Evidence of chewing indicated that one or more of the decedent’s three house cats had fed on the body after death. Recognizing and identifying carnivore and rodent activity on the soft flesh and bones of human remains is important in interpreting and reconstructing postmortem damage. Thorough analysis may help explain why skeletal elements are missing, damaged, or out of anatomical position. Conclusion: This report presents a multi-disciplinary approach combining forensic anthropology and forensic medicine in examining and interpreting human remains.

Explosives remain preferred methods for platform abandonment

International Nuclear Information System (INIS)

Pulsipher, A.; Daniel, W. IV; Kiesler, J.E.; Mackey, V. III

1996-01-01

Economics and safety concerns indicate that methods involving explosives remain the most practical and cost-effective means for abandoning oil and gas structures in the Gulf of Mexico. A decade has passed since 51 dead sea turtles, many endangered Kemp's Ridleys, washed ashore on the Texas coast shortly after explosives helped remove several offshore platforms. Although no relationship between the explosions and the dead turtles was ever established, in response to widespread public concern, the US Minerals Management Service (MMS) and National Marine Fisheries Service (NMFS) implemented regulations limiting the size and timing of explosive charges. Also, more importantly, they required that operators pay for observers to survey waters surrounding platforms scheduled for removal for 48 hr before any detonations. If observers spot sea turtles or marine mammals within the danger zone, the platform abandonment is delayed until the turtles leave or are removed. However, concern about the effects of explosives on marine life remains

Decomposition Technique for Remaining Useful Life Prediction

Science.gov (United States)

Saha, Bhaskar (Inventor); Goebel, Kai F. (Inventor); Saxena, Abhinav (Inventor); Celaya, Jose R. (Inventor)

2014-01-01

The prognostic tool disclosed here decomposes the problem of estimating the remaining useful life (RUL) of a component or sub-system into two separate regression problems: the feature-to-damage mapping and the operational conditions-to-damage-rate mapping. These maps are initially generated in off-line mode. One or more regression algorithms are used to generate each of these maps from measurements (and features derived from these), operational conditions, and ground truth information. This decomposition technique allows for the explicit quantification and management of different sources of uncertainty present in the process. Next, the maps are used in an on-line mode where run-time data (sensor measurements and operational conditions) are used in conjunction with the maps generated in off-line mode to estimate both current damage state as well as future damage accumulation. Remaining life is computed by subtracting the instance when the extrapolated damage reaches the failure threshold from the instance when the prediction is made.

Detection of kinetic change points in piece-wise linear single molecule motion

Science.gov (United States)

Hill, Flynn R.; van Oijen, Antoine M.; Duderstadt, Karl E.

2018-03-01

Single-molecule approaches present a powerful way to obtain detailed kinetic information at the molecular level. However, the identification of small rate changes is often hindered by the considerable noise present in such single-molecule kinetic data. We present a general method to detect such kinetic change points in trajectories of motion of processive single molecules having Gaussian noise, with a minimum number of parameters and without the need of an assumed kinetic model beyond piece-wise linearity of motion. Kinetic change points are detected using a likelihood ratio test in which the probability of no change is compared to the probability of a change occurring, given the experimental noise. A predetermined confidence interval minimizes the occurrence of false detections. Applying the method recursively to all sub-regions of a single molecule trajectory ensures that all kinetic change points are located. The algorithm presented allows rigorous and quantitative determination of kinetic change points in noisy single molecule observations without the need for filtering or binning, which reduce temporal resolution and obscure dynamics. The statistical framework for the approach and implementation details are discussed. The detection power of the algorithm is assessed using simulations with both single kinetic changes and multiple kinetic changes that typically arise in observations of single-molecule DNA-replication reactions. Implementations of the algorithm are provided in ImageJ plugin format written in Java and in the Julia language for numeric computing, with accompanying Jupyter Notebooks to allow reproduction of the analysis presented here.

Oceans of Opportunity. Harnessing Europe's largest domestic energy resource

International Nuclear Information System (INIS)

Fichaux, N.; Wilkes, J.

2009-09-01

Europe's offshore wind potential is enormous and able to power Europe seven times over. Over 100 GW of offshore wind projects are already in various stages of planning. If realised, these projects would produce 10% of the EU's electricity whilst avoiding 200 million tonnes of CO2 emissions each year. EWEA has a target of 40 GW of offshore wind in the EU by 2020, implying an average annual market growth of 28% over the coming 12 years. The EU market for onshore wind grew by an average 32% per year in the 12-year period from 1992-2004 - what the wind energy industry has achieved on land can be repeated at sea. EWEA's proposed offshore grid builds on the 11 offshore grids currently operating and 21 offshore grids currently being considered by the grid operators in the Baltic and North Seas to give Europe a truly pan-European electricity super highway. Strong political support and action from Europe's policy-makers will allow a new, multi-billion euro industry to be built. This new industry will deliver thousands of green collar jobs and a new renewable energy economy and establish Europe as world leader in offshore wind power technology. A single European electricity market with large amounts of wind power will bring affordable electricity to consumers, reduce import dependence, cut CO2 emissions and allow Europe to access its largest domestic energy source.

Interspecies nuclear transfer using fibroblasts from leopard, tiger, and lion ear piece collected postmortem as donor cells and rabbit oocytes as recipients.

Science.gov (United States)

Yelisetti, Uma Mahesh; Komjeti, Suman; Katari, Venu Charan; Sisinthy, Shivaji; Brahmasani, Sambasiva Rao

2016-06-01

Skin fibroblast cells were obtained from a small piece of an ear of leopard, lion, and tiger collected postmortem and attempts were made to synchronize the skin fibroblasts at G0/G1 of cell cycle using three different approaches. Efficiency of the approaches was tested following interspecies nuclear transfer with rabbit oocytes as recipient cytoplasm. Fluorescence-activated cell sorting revealed that the proportion of G0/G1 cells increased significantly (P lion, and tiger were successfully synchronized and used for the development of blastocysts using rabbit oocytes as recipient cytoplasm.

Estimating the recreational value of Pakistan's largest freshwater lake to support sustainable tourism management using a travel cost model

NARCIS (Netherlands)

Mangan, T.; Brouwer, R.; Lohano, H.; Nagraj, G.M.

2013-01-01

Keenjhar Lake, Pakistan's largest freshwater lake and an important Ramsar site, provides habitat for internationally important water birds. Annually, 385,000 people visit the lake. The lake is threatened by a variety of causes, including industrial and agricultural pollution. To support its

Distribution of the largest aftershocks in branching models of triggered seismicity: Theory of the universal Baath law

International Nuclear Information System (INIS)

Saichev, A.; Sornette, D.

2005-01-01

Using the epidemic-type aftershock sequence (ETAS) branching model of triggered seismicity, we apply the formalism of generating probability functions to calculate exactly the average difference between the magnitude of a mainshock and the magnitude of its largest aftershock over all generations. This average magnitude difference is found empirically to be independent of the mainshock magnitude and equal to 1.2, a universal behavior known as Baath's law. Our theory shows that Baath's law holds only sufficiently close to the critical regime of the ETAS branching process. Allowing for error bars ±0.1 for Baath's constant value around 1.2, our exact analytical treatment of Baath's law provides new constraints on the productivity exponent α and the branching ratio n: 0.9 < or approx. α≤1 and 0.8 < or approx. n≤1. We propose a method for measuring α based on the predicted renormalization of the Gutenberg-Richter distribution of the magnitudes of the largest aftershock. We also introduce the 'second Baath law for foreshocks': the probability that a main earthquake turns out to be the foreshock does not depend on its magnitude ρ

State-owned companies dominate list of largest non-U.S. producers

International Nuclear Information System (INIS)

Beck, R.J.; Williamson, M.

1994-01-01

Because state-owned oil and gas companies dominate Oil and Gas Journal's list of largest non-US producers, data aren't fully comparable with those of the OGJ300. Many state companies report only production and reserves, with little or no financial data. Companies on the OGJ100, therefore, cannot be ranked by assets or revenues. Instead, they are listed by regions, based on location of corporate headquarters. There was no change in makeup of the top 20 holders of crude oil reserves. These companies' reserves totaled 872.3 billion bbl in 1993. The top 20 non-US companies now control 87.3 % of total world crude oil reserves, according to OGJ estimates. This is up marginally from 87.2 % of total world oil reserves in 1992. The top 20 had 87.7 % of total world reserves in 1991 and 85.5 % in 1990. The table lists company name, total assets, revenues, net income, capital and exploratory expenditures, worldwide oil production, gas production, oil and gas reserves worldwide

Line Balancing Using Largest Candidate Rule Algorithm In A Garment Industry: A Case Study

Directory of Open Access Journals (Sweden)

V. P.Jaganathan

2014-12-01

Full Text Available The emergence of fast changes in fashion has given rise to the need to shorten production cycle times in the garment industry. As effective usage of resources has a significant effect on the productivity and efficiency of production operations, garment manufacturers are urged to utilize their resources effectively in order to meet dynamic customer demand. This paper focuses specifically on line balancing and layout modification. The aim of assembly line balance in sewing lines is to assign tasks to the workstations, so that the machines of the workstation can perform the assigned tasks with a balanced loading. Largest Candidate Rule Algorithm (LCR has been deployed in this paper.

Influence of temperature and composition in the mechanical resistance and porosity of ceramic pieces

Directory of Open Access Journals (Sweden)

Jordán Vidal, M. M.

2001-03-01

Full Text Available We have tried to establish a relationship between the raw material and the mechanical properties of ceramic pieces subjected to different firing processes, so under the determinant of the thermal process we have done a follow up on the petrogenetic process that the manufacture of ceramics represents. This is evaluated in terms of the mechanical behaviour of the ceramic tile bodies, which have been normalised and submitted to tests for flexion. The principal objective is to be able to indicate what the optimum firing temperature for each sample is, and to determine what it is in the ceramic body which offers the greatest resistance when a specific force is applied. The study of the texture of the ceramic body will be considered mainly in relation to the existent porosity, as well as its distribution, which conditions its characteristics and specifications. The relation between porosity and the parameters that describe the porous texture of the ceramic tile pieces studied is complicated because of the fact that these have many pores with a complex and irregular spatial disposition, with a broad distribution of forms and sizes, and as such they do not fit into established empirical equations.

Se ha tratado de establecer la relación entre materia prima y propiedades mecánicas de piezas cerámicas sometidas a procesos de cocción diversos. Bajo el condicionante del proceso térmico se realiza un seguimiento del proceso petrogenético que representa la fabricación cerámica y se evalúa a través del comportamiento mecánico de probetas cerámicas normalizadas y sometidas a ensayos de flexión. El objetivo principal es poder indicar cuál es la temperatura óptima de cocción para cada muestra y determinar cuál es aquélla en que la probeta cerámica ofrece una mayor resistencia al aplicarle una determinada carga. El estudio de la textura de la matriz cerámica es de gran interés en relación con la porosidad, asi como su distribuci

Why Agricultural Educators Remain in the Classroom

Science.gov (United States)

Crutchfield, Nina; Ritz, Rudy; Burris, Scott

2013-01-01

The purpose of this study was to identify and describe factors that are related to agricultural educator career retention and to explore the relationships between work engagement, work-life balance, occupational commitment, and personal and career factors as related to the decision to remain in the teaching profession. The target population for…

Water-saturated systems of the largest gas and gas-condensate deposits of the USSR. Vodonapornye sistemy krupneishikh gazovykh i gazokondensatnykh mestorozhdenii sssr

Energy Technology Data Exchange (ETDEWEB)

Kortsenshtein, V.N.

1977-01-01

A description is given of water-pressure systems in a number of the largest gas and gas-condensate fields of the Soviet Union, whose industrial reserves exceed 500 billion cubic meters. These include fields located in the concluding stage of development with sharply reduced recovery (Shebelinsk), fields that have just begun to operate and are characterized by increasing production (Vuktyl, Medved, Orenburg, Shatlyk, Urengoisk), and fields that are not yet developed (Yamburg and Zapolyar). Problems in the theory and practice of studying water-pressure systems of the largest gas and gas-condensate fields are analyzed primarily in connection with conditions required for their rational development which would provide for a maximum extraction of hydrocarbons from the interior. Importance is also given to the hydrogeological aspects of the formation of large hydrocarbon deposits and their distribution in the earth's crust. The most reliable factual materials on hydrogeology are utilized. The book is designed for personnel in the gas and oil industries, hydrogeologists, and scientists interested in problems of the formation, survey, and development of the largest hydrocarbon deposits. 92 references, 65 figures, 71 tables.

The LHC Logging Service Capturing, storing and using time-series data for the world's largest scientific instrument

CERN Document Server

Billen, R; CERN. Geneva. AB Department

2006-01-01

CERN, the European Laboratory for Particle Physics, is well underway in building the most powerful particle accelerator called LHC (Large Hadron Collider), which will probe deeper into matter than ever before. This circular 27-km long superconducting installation is extremely complex, and its functioning has to be closely monitored. The LHC Logging service is aimed to satisfy the requirement of capturing and storing of any relevant piece of information to track its variation over time. Web-deployed tools have been developed to visualize, correlate and export the data into dedicated off-line analysis tools. The quality of the data, the manageability of the service and the overall system performance are key factors for the service. Oracle technology has been used extensively to support this mission-critical service, which has proven already to be useful during the commissioning phase of individual subsystems of the LHC. The architecture, design and implementation of the LHC Logging service, based on Oracle Data...

Patchwork plagiarism--a jigsaw of stolen puzzle pieces.

Science.gov (United States)

Supak Smolcić, Vesna; Bilić-Zulle, Lidija

2013-01-01

Plagiarism remains at the top in terms of interest to the scientific community. In its many vicious forms, patchwork plagiarism is characterized by numerous unresolved issues and often passes "below the radar" of editors and reviewers. The problem of detecting the complexity of misconduct has been partially resolved by plagiarism detection software. However, interpretation of relevant reports is not always obvious or easy. This article deals with plagiarism in general and patchwork plagiarism in particular, as well as related problems that editors must deal with to maintain the integrity of scientific journals.

Burst of virus infection and a possibly largest epidemic threshold of non-Markovian susceptible-infected-susceptible processes on networks

Science.gov (United States)

Liu, Qiang; Van Mieghem, Piet

2018-02-01

Since a real epidemic process is not necessarily Markovian, the epidemic threshold obtained under the Markovian assumption may be not realistic. To understand general non-Markovian epidemic processes on networks, we study the Weibullian susceptible-infected-susceptible (SIS) process in which the infection process is a renewal process with a Weibull time distribution. We find that, if the infection rate exceeds 1 /ln(λ1+1 ) , where λ1 is the largest eigenvalue of the network's adjacency matrix, then the infection will persist on the network under the mean-field approximation. Thus, 1 /ln(λ1+1 ) is possibly the largest epidemic threshold for a general non-Markovian SIS process with a Poisson curing process under the mean-field approximation. Furthermore, non-Markovian SIS processes may result in a multimodal prevalence. As a byproduct, we show that a limiting Weibullian SIS process has the potential to model bursts of a synchronized infection.

Pay less, take more: the myth of quality of life at the Brazil’s largest drugstore chain counter

Directory of Open Access Journals (Sweden)

André Luiz Maranhão de Souza Leão

2013-06-01

Full Text Available Considering the role of cultural transformer that the brandoccupies in the contemporary and seeking to delineate the role played bymyth in this construction, we look at Pague Menos, the largest pharmacyretail network in the country, through a qualitative study based on Barthesiansemiology. Our results showed six myths, whose relationships reveal ametanarrative: the quality of life.

77 FR 44528 - Dry Cargo Residue Discharges in the Great Lakes

Science.gov (United States)

2012-07-30

... occurs during cargo unloading. Within tunnels, large pieces of DCR that remain after unloading should be...) as a condition in which deck residues ``consist only of dust, powder, or isolated and random pieces... associated with the amount of DCR going dealing with removal of this IR into the water and voluntary...

Extraction and Simplification of Building Façade Pieces from Mobile Laser Scanner Point Clouds for 3D Street View Services

Directory of Open Access Journals (Sweden)

Yan Li

2016-12-01

Full Text Available Extraction and analysis of building façades are key processes in the three-dimensional (3D building reconstruction and realistic geometrical modeling of the urban environment, which includes many applications, such as smart city management, autonomous navigation through the urban environment, fly-through rendering, 3D street view, virtual tourism, urban mission planning, etc. This paper proposes a building facade pieces extraction and simplification algorithm based on morphological filtering with point clouds obtained by a mobile laser scanner (MLS. First, this study presents a point cloud projection algorithm with high-accuracy orientation parameters from the position and orientation system (POS of MLS that can convert large volumes of point cloud data to a raster image. Second, this study proposes a feature extraction approach based on morphological filtering with point cloud projection that can obtain building facade features in an image space. Third, this study designs an inverse transformation of point cloud projection to convert building facade features from an image space to a 3D space. A building facade feature with restricted facade plane detection algorithm is implemented to reconstruct façade pieces for street view service. The results of building facade extraction experiments with large volumes of point cloud from MLS show that the proposed approach is suitable for various types of building facade extraction. The geometric accuracy of building façades is 0.66 m in x direction, 0.64 in y direction and 0.55 m in the vertical direction, which is the same level as the space resolution (0.5 m of the point cloud.

Largest solar installation on a hotel in Switzerland; Groesste Hotel-Solaranlage der Schweiz

Energy Technology Data Exchange (ETDEWEB)

Stadelmann, M.

2008-07-01

This article describes the solar thermal installation on the Hotel Europa in St. Moritz-Champfer, Switzerland. The installation provides heat energy for domestic hot water preparation and for the heating of the hotel's indoor swimming pool. A thirty-percent reduction of heating oil consumption has been obtained. The system, which is based on the 'low-flow' principle, provides the highest possible temperature difference while using low pumping energy. The hotel's hot-water circulation system, which ensures fast availability of hot water at the taps, is also discussed. This largest hotel solar installation is designed to meet heating and hot-water requirements during the summer season. The high requirements placed on the materials used are discussed. Schematics are provided and first operational experience is briefly discussed.

A general scaling law reveals why the largest animals are not the fastest.

Science.gov (United States)

Hirt, Myriam R; Jetz, Walter; Rall, Björn C; Brose, Ulrich

2017-08-01

Speed is the fundamental constraint on animal movement, yet there is no general consensus on the determinants of maximum speed itself. Here, we provide a general scaling model of maximum speed with body mass, which holds across locomotion modes, ecosystem types and taxonomic groups. In contrast to traditional power-law scaling, we predict a hump-shaped relationship resulting from a finite acceleration time for animals, which explains why the largest animals are not the fastest. This model is strongly supported by extensive empirical data (474 species, with body masses ranging from 30 μg to 100 tonnes) from terrestrial as well as aquatic ecosystems. Our approach unravels a fundamental constraint on the upper limit of animal movement, thus enabling a better understanding of realized movement patterns in nature and their multifold ecological consequences.

Mapping changes in the largest continuous Amazonian mangrove belt using object-based classification of multisensor satellite imagery

Science.gov (United States)

Nascimento, Wilson R.; Souza-Filho, Pedro Walfir M.; Proisy, Christophe; Lucas, Richard M.; Rosenqvist, Ake

2013-01-01

Mapping and monitoring mangrove ecosystems is a crucial objective for tropical countries, particularly where human disturbance occurs and because of uncertainties associated with sea level and climatic fluctuation. In many tropical regions, such efforts have focused largely on the use of optical data despite low capture rates because of persistent cloud cover. Recognizing the ability of Synthetic Aperture Radar (SAR) for providing cloud-free observations, this study investigated the use of JERS-1 SAR and ALOS PALSAR data, acquired in 1996 and 2008 respectively, for mapping the extent of mangroves along the Brazilian coastline, from east of the Amazon River mouth, Pará State, to the Bay of São José in Maranhão. For each year, an object-orientated classification of major land covers (mangrove, secondary vegetation, gallery and swamp forest, open water, intermittent lakes and bare areas) was performed with the resulting maps then compared to quantify change. Comparison with available ground truth data indicated a general accuracy in the 2008 image classification of all land covers of 96% (kappa = 90.6%, tau = 92.6%). Over the 12 year period, the area of mangrove increased by 718.6 km2 from 6705 m2 to 7423.60 km2, with 1931.0 km² of expansion and 1213 km² of erosion noted; 5493 km² remained unchanged in extent. The general accuracy relating to changes in mangroves was 83.3% (Kappa 66.1%; tau 66.7%). The study confirmed that these mangroves constituted the largest continuous belt globally and were experiencing significant change because of the dynamic coastal environment and the influence of sedimentation from the Amazon River along the shoreline. The study recommends continued observations using combinations of SAR and optical data to establish trends in mangrove distributions and implications for provision of ecosystem services (e.g., fish/invertebrate nurseries, carbon storage and coastal protection).

A Bayesian Framework for Remaining Useful Life Estimation

Data.gov (United States)

National Aeronautics and Space Administration — The estimation of remaining useful life (RUL) of a faulty component is at the center of system prognostics and health management. It gives operators a potent tool in...

Spatial and temporal activity patterns of the free-living giant mole-rat (Fukomys mechowii, the largest social bathyergid.

Directory of Open Access Journals (Sweden)

Matěj Lövy

Full Text Available Despite the considerable attention devoted to the biology of social species of African mole-rats (Bathyergidae, Rodentia, knowledge is lacking about their behaviour under natural conditions. We studied activity of the largest social bathyergid, the giant mole-rat Fukomys mechowii, in its natural habitat in Zambia using radio-telemetry. We radio-tracked six individuals during three continuous 72-h sessions. Five of these individuals, including a breeding male, belonged to a single family group; the remaining female was probably a solitary disperser. The non-breeders of the family were active (i.e. outside the nest 5.8 hours per 24h-day with the activity split into 6.5 short bouts. The activity was more concentrated in the night hours, when the animals also travelled longer distances from the nest. The breeding male spent only 3.2 hours per day outside the nest, utilizing less than 20% of the whole family home range. The dispersing female displayed a much different activity pattern than the family members. Her 8.0 hours of outside-nest activity per day were split into 4.6 bouts which were twice as long as in the family non-breeders. Her activity peak in the late afternoon coincided with the temperature maximum in the depth of 10 cm (roughly the depth of the foraging tunnels. Our results suggest that the breeding individuals (at least males contribute very little to the work of the family group. Nevertheless, the amount of an individual's activity and its daily pattern are probably flexible in this species and can be modified in response to actual environmental and social conditions.

The 100-C-7 Remediation Project. An Overview of One of DOE's Largest Remediation Projects - 13260

Energy Technology Data Exchange (ETDEWEB)

Post, Thomas C. [U.S. Department of Energy Richland Operations Office, Richland, WA 99352 (United States); Strom, Dean [Washington Closure Hanford LLC, 2620 Fermi Avenue, Richland, WA 99354 (United States); Beulow, Laura [U.S. Environmental Protection Agency, 309 Bradley Boulevard, Suite 115, Richland, WA 99352 (United States)

2013-07-01

The U.S. Department of Energy Richland Operations Office (RL), U.S. Environmental Protection Agency (EPA) and Washington Closure Hanford LLC (WCH) completed remediation of one of the largest waste sites in the U.S. Department of Energy complex. The waste site, 100-C-7, covers approximately 15 football fields and was excavated to a depth of 85 feet (groundwater). The project team removed a total of 2.3 million tons of clean and contaminated soil, concrete debris, and scrap metal. 100-C-7 lies in Hanford's 100 B/C Area, home to historic B and C Reactors. The waste site was excavated in two parts as 100-C-7 and 100-C-7:1. The pair of excavations appear like pit mines. Mining engineers were hired to design their tiered sides, with safety benches every 17 feet and service ramps which allowed equipment access to the bottom of the excavations. The overall cleanup project was conducted over a span of almost 10 years. A variety of site characterization, excavation, load-out and sampling methodologies were employed at various stages of remediation. Alternative technologies were screened and evaluated during the project. A new method for cost effectively treating soils was implemented - resulting in significant cost savings. Additional opportunities for minimizing waste streams and recycling were identified and effectively implemented by the project team. During the final phase of cleanup the project team applied lessons learned throughout the entire project to address the final, remaining source of chromium contamination. The C-7 cleanup now serves as a model for remediating extensive deep zone contamination sites at Hanford. (authors)

Review of the Dinosaur Remains from the Middle Jurassic of Scotland, UK

Directory of Open Access Journals (Sweden)

Neil D. L. Clark

2018-02-01

Full Text Available Dinosaurs are rare from the Middle Jurassic worldwide. The Isle of Skye, is the only place in Scotland thus far to have produced dinosaur remains. These remains consist mainly of footprints, but also several bones and teeth. These Bajocian and Bathonian remains represent an important collection of a basal eusauropod, early examples of non-neosauropod and possible basal titanosauriform eusauropods, and theropod remains that may belong to an early coelurosaur and a possible megalosaurid, basal tyrannosauroid, or dromaeosaurid. The footprints from here also suggest a rich and diverse dinosaur fauna for which further better diagnosable remains are likely to be found.

Experience in the fabrication of 224 cm diameter electromagnet and coil for the Variable Energy Cyclotron Centre (Paper No. 005)

International Nuclear Information System (INIS)

Chaudhuri, J.; Das, S.K.; Bhattacharjee, B.B.

1987-02-01

The largest and vital component of a cyclotron is the D.C. magnet. The magnet core of cyclotron of the Variable Energy Cyclotron, Calcutta, is of H-shaped and made from low carbon steel casting and weighs nearly 262 tonnes. In length, width and height, the magnet is 6096mm x 2235mm x 2896mm respectively. The pole piece diameter is 2235mm with pole gap of 190.5±0.127. For convenient of handling and transportation, the upper and lower yoke of the magnet is in five pieces each. Apart from this, magnet has two numbers of legs and two numbers of pole pieces. The pole pieces are again splitted in two pieces for the convenience of fabrication assembly. The dimensions of the castings in the finished machined condition are 6096±1.5 x 889 x 447±0.026 for yoke slabs and 1117.6±0.8 (H) x 1092±1.5 (L) x 2235±1.5 (Max.) x 1422 (Min.) mm for the magnet legs. The weight of each casting of yoke slab is 19000 kg and that of leg casting is 17420 Kg each. The castings are required to have required magnetic saturation value and soundness of casting to the rolled steel standard. (author). 7 figs

77 FR 48536 - Notice of Inventory Completion: Logan Museum of Anthropology, Beloit College, Beloit, WI

Science.gov (United States)

2012-08-14

...-shaped bracelet, 1 dog bone pendant, 1 wooden bowl, 1 lot of leather pieces, 1 horse effigy catlinite... between 1929 and 1931, human remains representing, at minimum, six individuals were removed by Bowers in... blades), 1 angled iron object, 1 chert flake, 1 hide fragment, 1 piece of vermilion, and 754 blue glass...

76 FR 28068 - Notice of Inventory Completion: Utah State University/College of Eastern Utah Prehistoric Museum...

Science.gov (United States)

2011-05-13

... pieces of leather (used to strap the wrapped infant to the stick cradle frame). In the 1960s, human... to 1971, human remains representing a minimum of six individuals were accidentally discovered during... maize cobs, 3 small pieces of cordage, 1 large twist/cache of dogbane fiber, 2 large pine cones, 1 bear...

Estimate of the largest Lyapunov characteristic exponent of a high dimensional atmospheric global circulation model: a sensitivity analysis

International Nuclear Information System (INIS)

Guerrieri, A.

2009-01-01

In this report the largest Lyapunov characteristic exponent of a high dimensional atmospheric global circulation model of intermediate complexity has been estimated numerically. A sensitivity analysis has been carried out by varying the equator-to-pole temperature difference, the space resolution and the value of some parameters employed by the model. Chaotic and non-chaotic regimes of circulation have been found. [it

When clusters collide: constraints on antimatter on the largest scales

International Nuclear Information System (INIS)

Steigman, Gary

2008-01-01

Observations have ruled out the presence of significant amounts of antimatter in the Universe on scales ranging from the solar system, to the Galaxy, to groups and clusters of galaxies, and even to distances comparable to the scale of the present horizon. Except for the model-dependent constraints on the largest scales, the most significant upper limits to diffuse antimatter in the Universe are those on the ∼Mpc scale of clusters of galaxies provided by the EGRET upper bounds to annihilation gamma rays from galaxy clusters whose intracluster gas is revealed through its x-ray emission. On the scale of individual clusters of galaxies the upper bounds to the fraction of mixed matter and antimatter for the 55 clusters from a flux-limited x-ray survey range from 5 × 10 −9 to −6 , strongly suggesting that individual clusters of galaxies are made entirely of matter or of antimatter. X-ray and gamma-ray observations of colliding clusters of galaxies, such as the Bullet Cluster, permit these constraints to be extended to even larger scales. If the observations of the Bullet Cluster, where the upper bound to the antimatter fraction is found to be −6 , can be generalized to other colliding clusters of galaxies, cosmologically significant amounts of antimatter will be excluded on scales of order ∼20 Mpc (M∼5×10 15 M sun )

Remaining life diagnosis method and device for nuclear reactor

International Nuclear Information System (INIS)

Yamamoto, Michiyoshi.

1996-01-01

A neutron flux measuring means is inserted from the outside of a reactor pressure vessel during reactor operation to forecast neutron-degradation of materials of incore structural components in the vicinity of portions to be measured based on the measured values, and the remaining life of the reactor is diagnosed by the forecast degraded state. In this case, the neutron fluxes to be measured are desirably fast and/or medium neutron fluxes. As the positions where the measuring means is to be inserted, for example, the vicinity of the structural components at the periphery of the fuel assembly is selected. Aging degradation characteristics of the structural components are determined by using the aging degradation data for the structural materials. The remaining life is analyzed based on obtained aging degradation characteristics and stress evaluation data of the incore structural components at portions to be measured. Neutron irradiation amount of structural components at predetermined positions can be recognized accurately, and appropriate countermeasures can be taken depending on the forecast remaining life thereby enabling to improve the reliability of the reactor. (N.H.)

78 FR 59958 - Notice of Inventory Completion: The Michigan State University Museum, East Lansing, MI

Science.gov (United States)

2013-09-30

... burial identified as a young-adult male. The remaining human remains, representing at minimum six additional individuals, included a cranial piece, four ribs, five long bone fragments, four tarsal fragments...

Data-driven remaining useful life prognosis techniques stochastic models, methods and applications

CERN Document Server

Si, Xiao-Sheng; Hu, Chang-Hua

2017-01-01

This book introduces data-driven remaining useful life prognosis techniques, and shows how to utilize the condition monitoring data to predict the remaining useful life of stochastic degrading systems and to schedule maintenance and logistics plans. It is also the first book that describes the basic data-driven remaining useful life prognosis theory systematically and in detail. The emphasis of the book is on the stochastic models, methods and applications employed in remaining useful life prognosis. It includes a wealth of degradation monitoring experiment data, practical prognosis methods for remaining useful life in various cases, and a series of applications incorporated into prognostic information in decision-making, such as maintenance-related decisions and ordering spare parts. It also highlights the latest advances in data-driven remaining useful life prognosis techniques, especially in the contexts of adaptive prognosis for linear stochastic degrading systems, nonlinear degradation modeling based pro...

Infectious agents and amyotrophic lateral sclerosis: another piece of the puzzle of motor neuron degeneration.

Science.gov (United States)

Castanedo-Vazquez, David; Bosque-Varela, Pilar; Sainz-Pelayo, Arancha; Riancho, Javier

2018-05-29

Amyotrophic lateral sclerosis (ALS) is the most common neurodegenerative disease affecting motor neurons (MN). This fatal disease is characterized by progressive muscle wasting and lacks an effective treatment. ALS pathogenesis has not been elucidated yet. In a small proportion of ALS patients, the disease has a familial origin, related to mutations in specific genes, which directly result in MN degeneration. By contrast, the vast majority of cases are though to be sporadic, in which genes and environment interact leading to disease in genetically predisposed individuals. Lately, the role of the environment has gained relevance in this field and an extensive list of environmental conditions have been postulated to be involved in ALS. Among them, infectious agents, particularly viruses, have been suggested to play an important role in the pathogenesis of the disease. These agents could act by interacting with some crucial pathways in MN degeneration, such as gene processing, oxidative stress or neuroinflammation. In this article, we will review the main studies about the involvement of microorganisms in ALS, subsequently discussing their potential pathogenic effect and integrating them as another piece in the puzzle of ALS pathogenesis.

Work-related factors influencing home care nurse intent to remain employed.

Science.gov (United States)

Tourangeau, Ann E; Patterson, Erin; Saari, Margaret; Thomson, Heather; Cranley, Lisa

Health care is shifting out of hospitals into community settings. In Ontario, Canada, home care organizations continue to experience challenges recruiting and retaining nurses. However, factors influencing home care nurse retention that can be modified remain largely unexplored. Several groups of factors have been identified as influencing home care nurse intent to remain employed including job characteristics, work structures, relationships and communication, work environment, responses to work, and conditions of employment. The aim of this study was to test and refine a model that identifies which factors are related to home care nurse intentions to remain employed for the next 5 years with their current home care employer organization. A cross-sectional survey design was implemented to test and refine a hypothesized model of home care nurse intent to remain employed. Logistic regression was used to determine which factors influence home care nurse intent to remain employed. Home care nurse intent to remain employed for the next 5 years was associated with increasing age, higher nurse-evaluated quality of care, having greater variety of patients, experiencing greater meaningfulness of work, having greater income stability, having greater continuity of client care, experiencing more positive relationships with supervisors, experiencing higher work-life balance, and being more satisfied with salary and benefits. Home care organizations can promote home care nurse intent to remain employed by (a) ensuring nurses have adequate training and resources to provide quality client care, (b) improving employment conditions to increase income stability and satisfaction with pay and benefits, (c) ensuring manageable workloads to facilitate improved work-life balance, and (d) ensuring leaders are accessible and competent.

Semantic Web, Reusable Learning Objects, Personal Learning Networks in Health: Key Pieces for Digital Health Literacy.

Science.gov (United States)

Konstantinidis, Stathis Th; Wharrad, Heather; Windle, Richard; Bamidis, Panagiotis D

2017-01-01

The knowledge existing in the World Wide Web is exponentially expanding, while continuous advancements in health sciences contribute to the creation of new knowledge. There are a lot of efforts trying to identify how the social connectivity can endorse patients' empowerment, while other studies look at the identification and the quality of online materials. However, emphasis has not been put on the big picture of connecting the existing resources with the patients "new habits" of learning through their own Personal Learning Networks. In this paper we propose a framework for empowering patients' digital health literacy adjusted to patients' currents needs by utilizing the contemporary way of learning through Personal Learning Networks, existing high quality learning resources and semantics technologies for interconnecting knowledge pieces. The framework based on the concept of knowledge maps for health as defined in this paper. Health Digital Literacy needs definitely further enhancement and the use of the proposed concept might lead to useful tools which enable use of understandable health trusted resources tailored to each person needs.

Quick detection of traditional Chinese medicine ‘Atractylodis Macrocephalae Rhizoma’ pieces by surface-enhanced Raman spectroscopy

Science.gov (United States)

Huang, Hao; Shi, Hong; Feng, Shangyuan; Lin, Juqiang; Chen, Weiwei; Yu, Yun; Lin, Duo; Xu, Qian; Chen, Rong

2013-01-01

A surface-enhanced Raman spectroscopy (SERS) method was developed for the analysis of traditional Chinese medicine ‘Atractylodis Macrocephalae Rhizoma’ pieces (AMRP) for the first time with the aim to develop a quick method for traditional Chinese medicine detection. Both Raman spectra and SERS spectra were obtained from AMRP, and tentative assignments of the Raman bands in the measured spectra suggested that only a few weak Raman peaks could be observed in the regular Raman spectra, while primary Raman peaks at around 536, 555, 619, 648, 691, 733, 790, 958, 1004, 1031, 1112, 1244, 1324, 1395, 1469, 1574 and 1632 cm-1 could be observed in the SERS spectra, with the strongest signals at 619, 733, 958, 1324, 1395 and 1469 cm-1. This was due to a strong interaction between the silver colloids and the AMRP, which led to an extraordinary enhancement in the intensity of the Raman scattering in AMRP. This exploratory study suggests the SERS technique has great potential for providing a novel non-destructive method for effectively and accurately detecting traditional Chinese medicine without complicated separation and extraction.

Red Assembly: the work remains

Directory of Open Access Journals (Sweden)

Leslie Witz

installed. What to do at this limit, at the transgressive encounter between saying yes and no to history, remains the challenge. It is the very challenge of what insistently remains.

76 FR 80393 - Notice of Inventory Completion: Field Museum of Natural History, Chicago, IL

Science.gov (United States)

2011-12-23

... the Remains In March 1901, human remains representing, at minimum, six individuals (catalog numbers... child's basket (catalog number 70830) and an abalone shell comprised of one larger piece of shell and...

Reach and messages of the world's largest ivory burn.

Science.gov (United States)

Braczkowski, Alexander; Holden, Matthew H; O'Bryan, Christopher; Choi, Chi-Yeung; Gan, Xiaojing; Beesley, Nicholas; Gao, Yufang; Allan, James; Tyrrell, Peter; Stiles, Daniel; Brehony, Peadar; Meney, Revocatus; Brink, Henry; Takashina, Nao; Lin, Ming-Ching; Lin, Hsien-Yung; Rust, Niki; Salmo, Severino G; Watson, James Em; Kahumbu, Paula; Maron, Martine; Possingham, Hugh P; Biggs, Duan

2018-03-01

Recent increases in ivory poaching have depressed African elephant populations. Successful enforcement has led to ivory being stockpiled. Stockpile destruction is becoming increasingly popular, and most destruction has occurred in the last five years. Ivory destruction is intended to send a strong message against ivory consumption, both in promoting a taboo on ivory use and catalyzing policy change. However, there has been no effort to establish the distribution and extent of media reporting on ivory destruction events globally. We analyze media coverage across eleven important nation states of the largest ivory destruction event in history (Kenya, 30 April 2016). We used a well-accepted online media crawling tool and key language translations to search online and print newspapers. We found most online news on the ivory burn came from the US (81% of articles), while print news was dominated by Kenya (61% of articles). We subjected online articles from five key countries and territories to content analysis and found 86-97% of all online articles reported the burn as a positive conservation action, while between 4-50% discussed ivory burning as having a negative impact on elephant conservation. Most articles discussed law enforcement and trade bans as effective for elephant conservation. There was more relative search interest globally on the 2016 Kenyan ivory burn than any other in five years. Our study is the first attempt to track the spread of media around an ivory burn and is a case study in tracking the effects of a conservation-marketing event. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Towards the use of similarity distances to music genre classification: A comparative study.

Science.gov (United States)

Goienetxea, Izaro; Martínez-Otzeta, José María; Sierra, Basilio; Mendialdua, Iñigo

2018-01-01

Music genre classification is a challenging research concept, for which open questions remain regarding classification approach, music piece representation, distances between/within genres, and so on. In this paper an investigation on the classification of generated music pieces is performed, based on the idea that grouping close related known pieces in different sets -or clusters- and then generating in an automatic way a new song which is somehow "inspired" in each set, the new song would be more likely to be classified as belonging to the set which inspired it, based on the same distance used to separate the clusters. Different music pieces representations and distances among pieces are used; obtained results are promising, and indicate the appropriateness of the used approach even in a such a subjective area as music genre classification is.

Patchwork plagiarism – a jigsaw of stolen puzzle pieces

OpenAIRE

Šupak Smolčić, Vesna; Bilić-Zulle, Lidija

2013-01-01

Plagiarism remains at the top in terms of interest to the scientific community. In its many vicious forms, patchwork plagiarism is characterized by numerous unresolved issues and often passes “below the radar” of editors and reviewers. The problem of detecting the complexity of misconduct has been partially resolved by plagiarism detection software. However, interpretation of relevant reports is not always obvious or easy. This article deals with plagiarism in general and patchwork plagiarism...

Hamlet - little known piece by Enriko Josif: Literary-theoretical, philosophical and musicological views

Directory of Open Access Journals (Sweden)

Marjanović Nataša

2011-01-01

Full Text Available Hamlet is well-known as the most famous tragedy written by William Shakespeare. This dramatic work has, throughout the centuries, lead numerous writers, poets, literary-critics and philosophers to think about universal issues of life, human nature, love, loyalty and friendship. Hamlet has not just been the subject of discussion from the point of view of the theory of literature and human psychology and philosophy, it has also directly inspired the creation of many artistic works. One of those works which forms the main subject-matter of this paper is the almost unknown music for Hamlet by Enriko Josif. Enriko Josif was an extraordinary figure, a versatile artist and thinker, almost a kind of philosopher. In his opinion and in accordance with his inner feeling, art was a matter of divine creation first of all. He admired those artists who dealt with difficult issues of life in their works of art and William Shakespeare was to him one of the most prominent among them. In general terms, we have highlighted certain general points about Josif’s views on an artist’s life and work and have presented our notions about his piece. Specifically, we have tried to point out personal views that Josif held about Hamlet, as well as the most important features of Josif’s music, which are broadly in accordance with the literary, ethical, philosophical and theological critical tradition surrounding this masterpiece.

Memory structures for encoding and retrieving a piece of music: an ERP investigation.

Science.gov (United States)

Williamon, Aaron; Egner, Tobias

2004-12-01

This study examined behavioral and neural correlates of expert musical memory, specifically the hypothesis that particular bars within a complex piece of music would serve as structural markers for encoding to and retrieval from memory. Six pianists were asked to learn and memorize a set prelude by J.S. Bach for performance, and to identify bars that they employed for structuring the prelude into component sections. Following performance from memory, the participants took part in a visual recognition memory task, in which single bars from the prelude had to be distinguished from matched new bars. During the recognition task, the electroencephalogram (EEG) was recorded, and event-related potentials (ERPs) from correctly identified prelude stimulus trials were averaged according to their hypothesized status into "structural" and "nonstructural" bars. The results showed that correct identification of structural bars was significantly faster (and tended to display higher accuracy) than recognition of non-structural ones. In addition, recognition of structural bars was associated with a significantly greater negative ERP peak of 300-400 ms latency and a right centro-parietal scalp distribution. This mid-latency negativity appears to index processing of stimuli that served as cues for encoding and retrieval of a complex semantic structure, and is qualitatively and conceptually different from other previously identified recognition memory ERPs (such as the "old/new" effect), as well as from the classic N400 ERP. The data support existing theories of expert memory and music cognition.

Does hypertension remain after kidney transplantation?

Directory of Open Access Journals (Sweden)

Gholamreza Pourmand

2015-05-01

Full Text Available Hypertension is a common complication of kidney transplantation with the prevalence of 80%. Studies in adults have shown a high prevalence of hypertension (HTN in the first three months of transplantation while this rate is reduced to 50- 60% at the end of the first year. HTN remains as a major risk factor for cardiovascular diseases, lower graft survival rates and poor function of transplanted kidney in adults and children. In this retrospective study, medical records of 400 kidney transplantation patients of Sina Hospital were evaluated. Patients were followed monthly for the 1st year, every two months in the 2nd year and every three months after that. In this study 244 (61% patients were male. Mean ± SD age of recipients was 39.3 ± 13.8 years. In most patients (40.8% the cause of end-stage renal disease (ESRD was unknown followed by HTN (26.3%. A total of 166 (41.5% patients had been hypertensive before transplantation and 234 (58.5% had normal blood pressure. Among these 234 individuals, 94 (40.2% developed post-transplantation HTN. On the other hand, among 166 pre-transplant hypertensive patients, 86 patients (56.8% remained hypertensive after transplantation. Totally 180 (45% patients had post-transplantation HTN and 220 patients (55% didn't develop HTN. Based on the findings, the incidence of post-transplantation hypertension is high, and kidney transplantation does not lead to remission of hypertension. On the other hand, hypertension is one of the main causes of ESRD. Thus, early screening of hypertension can prevent kidney damage and reduce further problems in renal transplant recipients.

Solving intraocular lens-related pigment dispersion syndrome with repositioning of primary sulcus implanted single-piece IOL in the capsular bag.

Science.gov (United States)

Kohnen, Thomas; Kook, Daniel

2009-08-01

We describe 2 cases of pigment dispersion syndrome (PDS) after uneventful phacoemulsification and implantation of a posterior chamber single-piece intraocular lens (IOL) with a sharp-edge design. In both cases, several days after IOL implantation, marked pigment dispersion was seen on the iris and in the trabecular meshwork, associated with an elevation in intraocular pressure (IOP). Thorough examination showed that the implanted IOL was in the ciliary sulcus. After surgical repositioning of both IOLs in the capsular bag, the pigment dispersion regressed and the IOP returned to normal limits. The 2 cases suggest that particularly in PDS patients, an IOL with an anterior sharp-edge design should be implanted in the capsular bag. Implantation in the ciliary sulcus should be avoided.

Comprehensive examination of conventional and innovative body fluid identification approaches and DNA profiling of laundered blood- and saliva-stained pieces of cloths.

Science.gov (United States)

Kulstein, G; Wiegand, P

2018-01-01

Body fluids like blood and saliva are commonly encountered during investigations of high volume crimes like homicides. The identification of the cellular origin and the composition of the trace can link suspects or victims to a certain crime scene and provide a probative value for criminal investigations. To erase all traces from the crime scene, perpetrators often wash away their traces. Characteristically, items that show exposed stains like blood are commonly cleaned or laundered to free them from potential visible leftovers. Mostly, investigators do not delegate the DNA analysis of laundered items. However, some studies have already revealed that items can still be used for DNA analysis even after they have been laundered. Nonetheless, a systematical evaluation of laundered blood and saliva traces that provides a comparison of different established and newly developed methods for body fluid identification (BFI) is still missing. Herein, we present the results of a comprehensive study of laundered blood- and saliva-stained pieces of cloths that were applied to a broad range of methods for BFI including conventional approaches as well as molecular mRNA profiling. The study included the evaluation of cellular origin as well as DNA profiling of blood- and saliva-stained (synthetic fiber and cotton) pieces of cloths, which have been washed at various washing temperatures for one or multiple times. Our experiments demonstrate that, while STR profiling seems to be sufficiently sensitive for the individualization of laundered items, there is a lack of approaches for BFI with the same sensitivity and specificity allowing to characterize the cellular origin of challenging, particularly laundered, blood and saliva samples.

And the Dead Remain Behind

Directory of Open Access Journals (Sweden)

Peter Read

2013-08-01

Full Text Available In most cultures the dead and their living relatives are held in a dialogic relationship. The dead have made it clear, while living, what they expect from their descendants. The living, for their part, wish to honour the tombs of their ancestors; at the least, to keep the graves of the recent dead from disrepair. Despite the strictures, the living can fail their responsibilities, for example, by migration to foreign countries. The peripatetic Chinese are one of the few cultures able to overcome the dilemma of the wanderer or the exile. With the help of a priest, an Australian Chinese migrant may summon the soul of an ancestor from an Asian grave to a Melbourne temple, where the spirit, though removed from its earthly vessel, will rest and remain at peace. Amongst cultures in which such practices are not culturally appropriate, to fail to honour the family dead can be exquisitely painful. Violence is the cause of most failure.

Molecular genetic identification of skeletal remains of apartheid ...

African Journals Online (AJOL)

The Truth and Reconciliation Commission made significant progress in examining abuses committed during the apartheid era in South Africa. Despite information revealed by the commission, a large number of individuals remained missing when the commission closed its proceedings. This provided the impetus for the ...

Palmar, Patellar, and Pedal Human Remains from Pavlov

Czech Academy of Sciences Publication Activity Database

Trinkaus, E.; Wojtal, P.; Wilczyński, J.; Sázelová, Sandra; Svoboda, Jiří

2017-01-01

Roč. 2017, June (2017), s. 73-101 ISSN 1545-0031 Institutional support: RVO:68081758 Keywords : Gravettian * human remains * isolated bones * anatomically modern humans * Upper Paleolithic Subject RIV: AC - Archeology, Anthropology, Ethnology OBOR OECD: Archaeology http://paleoanthro.org/media/journal/content/PA20170073.pdf

Robotics to enable older adults to remain living at home.

Science.gov (United States)

Pearce, Alan J; Adair, Brooke; Miller, Kimberly; Ozanne, Elizabeth; Said, Catherine; Santamaria, Nick; Morris, Meg E

2012-01-01

Given the rapidly ageing population, interest is growing in robots to enable older people to remain living at home. We conducted a systematic review and critical evaluation of the scientific literature, from 1990 to the present, on the use of robots in aged care. The key research questions were as follows: (1) what is the range of robotic devices available to enable older people to remain mobile, independent, and safe? and, (2) what is the evidence demonstrating that robotic devices are effective in enabling independent living in community dwelling older people? Following database searches for relevant literature an initial yield of 161 articles was obtained. Titles and abstracts of articles were then reviewed by 2 independent people to determine suitability for inclusion. Forty-two articles met the criteria for question 1. Of these, 4 articles met the criteria for question 2. Results showed that robotics is currently available to assist older healthy people and people with disabilities to remain independent and to monitor their safety and social connectedness. Most studies were conducted in laboratories and hospital clinics. Currently limited evidence demonstrates that robots can be used to enable people to remain living at home, although this is an emerging smart technology that is rapidly evolving.

Robotics to Enable Older Adults to Remain Living at Home

Directory of Open Access Journals (Sweden)

Alan J. Pearce

2012-01-01

Full Text Available Given the rapidly ageing population, interest is growing in robots to enable older people to remain living at home. We conducted a systematic review and critical evaluation of the scientific literature, from 1990 to the present, on the use of robots in aged care. The key research questions were as follows: (1 what is the range of robotic devices available to enable older people to remain mobile, independent, and safe? and, (2 what is the evidence demonstrating that robotic devices are effective in enabling independent living in community dwelling older people? Following database searches for relevant literature an initial yield of 161 articles was obtained. Titles and abstracts of articles were then reviewed by 2 independent people to determine suitability for inclusion. Forty-two articles met the criteria for question 1. Of these, 4 articles met the criteria for question 2. Results showed that robotics is currently available to assist older healthy people and people with disabilities to remain independent and to monitor their safety and social connectedness. Most studies were conducted in laboratories and hospital clinics. Currently limited evidence demonstrates that robots can be used to enable people to remain living at home, although this is an emerging smart technology that is rapidly evolving.

LONG-TERM PRESERVATION OF THE PHYSICAL REMAINS OF THE DESTROYED BUDDHA FIGURES IN BAMIYAN (AFGHANISTAN USING VIRTUAL REALITY TECHNOLOGIES FOR PREPARATION AND EVALUATION OF RESTORATION MEASURES

Directory of Open Access Journals (Sweden)

G. Toubekis

2017-08-01

Full Text Available In March 2001, the world’s largest depictions of standing Buddha figures located in Bamiyan (Afghanistan were destroyed during a campaign of the Taliban leadership against all non-Muslim heritage in the country. Bamiyan and its archaeological remains have been nominated a World Heritage also to commemorate the events of destruction the site has experienced over the centuries. More than fifteen years after the Giant Buddha figures turned into dust, the UNESCO Safeguarding campaign for the preservation of the Bamiyan World Heritage property has made considerable progress. Upon continued request by the local population and the national government, the international community is asked to contribute proposals for the future presentation of the physical remains including the options of reassembling the original fragments. The achievements and backlashes of the UNESCO campaign are discussed and a proposal is given, how virtual technology can contribute to the ongoing discussion regarding the future of the site. At a time when deliberate raids during military conflicts against heritage places have become commonplace, the Bamiyan case has become emblematic and is considered now a key turning point in the heritage community on the question, which roles reconstruction can have especially in the aftermath of conflict situations. It is argued that immersive virtual reality technologies offer the chance to investigate how values attributed to cultural heritage are produced and experienced among different stakeholder groups.

Long-Term Preservation of the Physical Remains of the Destroyed Buddha Figures in Bamiyan (afghanistan) Using Virtual Reality Technologies for Preparation and Evaluation of Restoration Measures

Science.gov (United States)

Toubekis, G.; Jansen, M.; Jarke, M.

2017-08-01

In March 2001, the world's largest depictions of standing Buddha figures located in Bamiyan (Afghanistan) were destroyed during a campaign of the Taliban leadership against all non-Muslim heritage in the country. Bamiyan and its archaeological remains have been nominated a World Heritage also to commemorate the events of destruction the site has experienced over the centuries. More than fifteen years after the Giant Buddha figures turned into dust, the UNESCO Safeguarding campaign for the preservation of the Bamiyan World Heritage property has made considerable progress. Upon continued request by the local population and the national government, the international community is asked to contribute proposals for the future presentation of the physical remains including the options of reassembling the original fragments. The achievements and backlashes of the UNESCO campaign are discussed and a proposal is given, how virtual technology can contribute to the ongoing discussion regarding the future of the site. At a time when deliberate raids during military conflicts against heritage places have become commonplace, the Bamiyan case has become emblematic and is considered now a key turning point in the heritage community on the question, which roles reconstruction can have especially in the aftermath of conflict situations. It is argued that immersive virtual reality technologies offer the chance to investigate how values attributed to cultural heritage are produced and experienced among different stakeholder groups.

Supersize me: Remains of three white-tailed deer (Odocoileus virginianus) in an invasive Burmese python (Python molurus bivittatus) in Florida

Science.gov (United States)

Boback, Scott M.; Snow, Ray W.; Hsu, Teresa; Peurach, Suzanne C.; Dove, Carla J.; Reed, Robert N.

2016-01-01

Snakes have become successful invaders in a wide variety of ecosystems worldwide. In southern Florida, USA, the Burmese python (Python molurus bivittatus) has become established across thousands of square kilometers including all of Everglades National Park (ENP). Both experimental and correlative data have supported a relationship between Burmese python predation and declines or extirpations of mid- to large-sized mammals in ENP. In June 2013 a large python (4.32 m snout-vent length, 48.3 kg) was captured and removed from the park. Subsequent necropsy revealed a massive amount of fecal matter (79 cm in length, 6.5 kg) within the snake’s large intestine. A comparative examination of bone, teeth, and hooves extracted from the fecal contents revealed that this snake consumed three white-tailed deer (Odocoileus virginianus). This is the first report of an invasive Burmese python containing the remains of multiple white-tailed deer in its gut. Because the largest snakes native to southern Florida are not capable of consuming even mid-sized mammals, pythons likely represent a novel predatory threat to white-tailed deer in these habitats. This work highlights the potential impact of this large-bodied invasive snake and supports the need for more work on invasive predator-native prey relationships.

On some perculiarities of microstructure formation and the mechanical properties in thick-walled pieces of cast iron and their application as reactor structural materials

International Nuclear Information System (INIS)

Janakiev, N.

1975-01-01

The following problems are dealt with in the present work: Microstructure formation and mechanical properties of thick-walled cast pieces, influence of neutron irradiation on the mechanical properties, manufacture of thick-walled castings for reactor construction, application of cast iron as reactor structural material. It is shown that graphite formation plays an extremely important role regarding the mechanical properties. A new construction for vertically stressed pressure vessels is given. These vessels can be fabricated mainly of cast iron with graphite spheres, cast steel, or a combination of both depending on the operational pressure. (GSCH) [de

Artistic Chess

Science.gov (United States)

Blackwood, Christine Horvatis

2011-01-01

Chess is one of the world's oldest games, invented in India before 600 AD. The original pieces were inspired by the infantry, cavalry, elephants, and chariots of the ancient Indian army. The design of chess pieces changed when the game spread to the West, reflecting the society of medieval Europe. The king remained, pawns were the foot soldiers,…

Dinosaur remains from the type Maastrichtian: An update

NARCIS (Netherlands)

Weishampel, David B.; Mulder, Eric W A; Dortangs, Rudi W.; Jagt, John W M; Jianu, Coralia Maria; Kuypers, Marcel M M; Peeters, Hans H G; Schulp, Anne S.

1999-01-01

Isolated cranial and post-cranial remains of hadrosaurid dinosaurs have been collected from various outcrops in the type area of the Maastrichtian stage during the last few years. In the present contribution, dentary and maxillary teeth are recorded from the area for the first time. Post-cranial

Characterization of the largest effector gene cluster of Ustilago maydis.

Directory of Open Access Journals (Sweden)

Thomas Brefort

2014-07-01

Full Text Available In the genome of the biotrophic plant pathogen Ustilago maydis, many of the genes coding for secreted protein effectors modulating virulence are arranged in gene clusters. The vast majority of these genes encode novel proteins whose expression is coupled to plant colonization. The largest of these gene clusters, cluster 19A, encodes 24 secreted effectors. Deletion of the entire cluster results in severe attenuation of virulence. Here we present the functional analysis of this genomic region. We show that a 19A deletion mutant behaves like an endophyte, i.e. is still able to colonize plants and complete the infection cycle. However, tumors, the most conspicuous symptoms of maize smut disease, are only rarely formed and fungal biomass in infected tissue is significantly reduced. The generation and analysis of strains carrying sub-deletions identified several genes significantly contributing to tumor formation after seedling infection. Another of the effectors could be linked specifically to anthocyanin induction in the infected tissue. As the individual contributions of these genes to tumor formation were small, we studied the response of maize plants to the whole cluster mutant as well as to several individual mutants by array analysis. This revealed distinct plant responses, demonstrating that the respective effectors have discrete plant targets. We propose that the analysis of plant responses to effector mutant strains that lack a strong virulence phenotype may be a general way to visualize differences in effector function.

Decontamination and management of human remains following incidents of hazardous chemical release.

Science.gov (United States)

Hauschild, Veronique D; Watson, Annetta; Bock, Robert

2012-01-01

To provide specific guidance and resources for systematic and orderly decontamination of human remains resulting from a chemical terrorist attack or accidental chemical release. A detailed review and health-based decision criteria protocol is summarized. Protocol basis and logic are derived from analyses of compound-specific toxicological data and chemical/physical characteristics. Guidance is suitable for civilian or military settings where human remains potentially contaminated with hazardous chemicals may be present, such as sites of transportation accidents, terrorist operations, or medical examiner processing points. Guidance is developed from data-characterizing controlled experiments with laboratory animals, fabrics, and materiel. Logic and specific procedures for decontamination and management of remains, protection of mortuary affairs personnel, and decision criteria to determine when remains are sufficiently decontaminated are presented. Established procedures as well as existing materiel and available equipment for decontamination and verification provide reasonable means to mitigate chemical hazards from chemically exposed remains. Unique scenarios such as those involving supralethal concentrations of certain liquid chemical warfare agents may prove difficult to decontaminate but can be resolved in a timely manner by application of the characterized systematic approaches. Decision criteria and protocols to "clear" decontaminated remains for transport and processing are also provided. Once appropriate decontamination and verification have been accomplished, normal procedures for management of remains and release can be followed.

76 FR 14057 - Notice of Inventory Completion: University of Wyoming, Anthropology Department, Human Remains...

Science.gov (United States)

2011-03-15

...: University of Wyoming, Anthropology Department, Human Remains Repository, Laramie, WY AGENCY: National Park... Anthropology Department, Human Remains Repository, Laramie, WY. The human remains and associated funerary... the human remains was made by University of Wyoming, Anthropology Department, Human Remains Repository...

Unified model to the Tungsten inert Gas welding process including the cathode, the plasma and the anode; Modele couple cathode-plasma-piece en vue de la simulation du procede de soudage a l'arc TIG

Energy Technology Data Exchange (ETDEWEB)

Brochard, M.

2009-06-15

During this work, a 2D axially symmetric model of a TIG arc welding process had been developed in order to predict for given welding parameters, the needed variables for a designer of welded assembly: the heat input on the work piece, the weld pool geometry,... The developed model, using the Cast3M finite elements software, deals with the physical phenomena acting in each part of the process: the cathode, the plasma, the work piece with a weld pool, and the interfaces between these parts. To solve this model, the thermohydraulics equations are coupled with the electromagnetic equations that are calculated in part using the least squares finite element method. The beginning of the model validation consisted in comparing the results obtained with the ones available in the scientific literature. Thus, this step points out the action of each force in the weld pool, the contribution of each heat flux in the energy balance. Finally, to validate the model predictiveness, experimental and numerical sensitivity analyses were conducted using a design of experiments approach. The effects of the process current, the arc gap and the electrode tip angle on the weld pool geometry and the energy transferred to the work piece and the arc efficiency were studied. The good agreement obtained by the developed model for these outputs shows the good reproduction of the process physics. (author)

The Song Remains the Same: A Replication and Extension of the MUSIC Model

Science.gov (United States)

Rentfrow, Peter J.; Goldberg, Lewis R.; Stillwell, David J.; Kosinski, Michal; Gosling, Samuel D.; Levitin, Daniel J.

2012-01-01

There is overwhelming anecdotal and empirical evidence for individual differences in musical preferences. However, little is known about what drives those preferences. Are people drawn to particular musical genres (e.g., rap, jazz) or to certain musical properties (e.g., lively, loud)? Recent findings suggest that musical preferences can be conceptualized in terms of five orthogonal dimensions: Mellow, Unpretentious, Sophisticated, Intense, and Contemporary (conveniently, MUSIC). The aim of the present research is to replicate and extend that work by empirically examining the hypothesis that musical preferences are based on preferences for particular musical properties and psychological attributes as opposed to musical genres. Findings from Study 1 replicated the five-factor MUSIC structure using musical excerpts from a variety of genres and subgenres and revealed musical attributes that differentiate each factor. Results from Studies 2 and 3 show that the MUSIC structure is recoverable using musical pieces from only the jazz and rock genres, respectively. Taken together, the current work provides strong evidence that preferences for music are determined by specific musical attributes and that the MUSIC model is a robust framework for conceptualizing and measuring such preferences. PMID:24825945

The Song Remains the Same: A Replication and Extension of the MUSIC Model.

Science.gov (United States)

Rentfrow, Peter J; Goldberg, Lewis R; Stillwell, David J; Kosinski, Michal; Gosling, Samuel D; Levitin, Daniel J

2012-12-01

There is overwhelming anecdotal and empirical evidence for individual differences in musical preferences. However, little is known about what drives those preferences. Are people drawn to particular musical genres (e.g., rap, jazz) or to certain musical properties (e.g., lively, loud)? Recent findings suggest that musical preferences can be conceptualized in terms of five orthogonal dimensions: Mellow, Unpretentious, Sophisticated, Intense, and Contemporary (conveniently, MUSIC). The aim of the present research is to replicate and extend that work by empirically examining the hypothesis that musical preferences are based on preferences for particular musical properties and psychological attributes as opposed to musical genres. Findings from Study 1 replicated the five-factor MUSIC structure using musical excerpts from a variety of genres and subgenres and revealed musical attributes that differentiate each factor. Results from Studies 2 and 3 show that the MUSIC structure is recoverable using musical pieces from only the jazz and rock genres, respectively. Taken together, the current work provides strong evidence that preferences for music are determined by specific musical attributes and that the MUSIC model is a robust framework for conceptualizing and measuring such preferences.

Mapping Biomass for REDD in the Largest Forest of Central Africa: the Democratic Republic of Congo

Science.gov (United States)

Shapiro, Aurelie; Saatchi, Sassan

2014-05-01

With the support of the International Climate Initiative (ICI) of the Federal Ministry of the Environment, Conservation, and Nuclear Security, the implementation of the German Development Bank KfW, the World Wide Fund for Nature (WWF) Germany, the University of California Los Angeles (UCLA) and local DRC partners will produce a national scale biomass map for the entire forest coverage of the Democratic Republic of Congo (DRC) along with feasibility assessments of different forest protection measures within a framework of a REDD+ model project. The « Carbon Map and Model (CO2M&M) » project will produce a national forest biomass map for the DRC, which will enable quantitative assessments of carbon stocks and emissions in the largest forest of the Congo Basin. This effort will support the national REDD (Reducing Emissions from Deforestation and Degradation) program in DRC, which plays a major role in sustainable development and poverty alleviation. This map will be developed from field data, complemented by airborne LiDAR (Light Detection and Ranging) and aerial photos, systematically sampled throughout the forests of the DRC and up-scaled to satellite images to accurately estimate carbon content in all forested areas. The second component of the project is to develop specific approaches for model REDD projects in key landscapes. This project represents the largest LiDAR-derived mapping effort in Africa, under unprecedented logistical constraints, which will provide one of the poorest nations in the world with the richest airborne and satellites derived datasets for analyzing forest structure, biomass and biodiversity.

Do Mechanical and Physicochemical Properties of Orthodontic NiTi Wires Remain Stable In Vivo?

Directory of Open Access Journals (Sweden)

Michał Sarul

2016-01-01

Full Text Available Introduction and Aim. Exceptional properties of the NiTi archwires may be jeopardized by the oral cavity; thus its long-term effect on the mechanical and physiochemical properties of NiTi archwires was the aim of work. Material and Methods. Study group comprised sixty 0.016 × 0.022 NiTi archwires from the same manufacturer evaluated (group A after the first 12 weeks of orthodontic treatment. 30 mm long pieces cut off from each wire prior to insertion formed the control group B. Obeying the strict rules of randomization, all samples were subjected to microscopic evaluation and nanoindentation test. Results. Both groups displayed substantial presence of nonmetallic inclusions. Heterogeneity of the structure and its alteration after usage were found in groups B and A, respectively. Conclusions. Long-term, reliable prediction of biomechanics of NiTi wires in vivo is impossible, especially new archwires from the same vendor display different physiochemical properties. Moreover, manufacturers have to decrease contamination in the production process in order to minimize risk of mutual negative influence of nickel-titanium archwires and oral environment.

Methodology for Extraction of Remaining Sodium of Used Sodium Containers

International Nuclear Information System (INIS)

Jung, Minhwan; Kim, Jongman; Cho, Youngil; Jeong, Jiyoung

2014-01-01

Sodium used as a coolant in the SFR (Sodium-cooled Fast Reactor) reacts easily with most elements due to its high reactivity. If sodium at high temperature leaks outside of a system boundary and makes contact with oxygen, it starts to burn and toxic aerosols are produced. In addition, it generates flammable hydrogen gas through a reaction with water. Hydrogen gas can be explosive within the range of 4.75 vol%. Therefore, the sodium should be handled carefully in accordance with standard procedures even though there is a small amount of target sodium remainings inside the containers and drums used for experiment. After the experiment, all sodium experimental apparatuses should be dismantled carefully through a series of draining, residual sodium extraction, and cleaning if they are no longer reused. In this work, a system for the extraction of the remaining sodium of used sodium drums has been developed and an operation procedure for the system has been established. In this work, a methodology for the extraction of remaining sodium out of the used sodium container has been developed as one of the sodium facility maintenance works. The sodium extraction system for remaining sodium of the used drums was designed and tested successfully. This work will contribute to an establishment of sodium handling technology for PGSFR. (Prototype Gen-IV Sodium-cooled Fast Reactor)

EVALUATION OF E-RECRUITMENT LEVEL AMONG THE LARGEST COMPANIES IN POLAND - PROJECT OF RESEARCH

Directory of Open Access Journals (Sweden)

Dorota Buchnowska

2015-12-01

Full Text Available The changes taking place in the labor market cause that it is increasingly difficult to recruit employees with the right skills and competencies to companies. To reach the right candidates, they use modern IT solutions, such as ATS (Applicant Tracking System, which are supporting the processes of recruitment. Among others, they enable the publication of job offers on the Internet - on corporate websites, job portals and business social networking services - and apply for jobs online through these channels. This article pre-sents the evolution of the use of the Internet, and particularly the social media, in the recruitment process and presents a projekt of comprehensive research, which aims is to analyze and evaluate of the level of development of e-recruitment in Poland among largest companies.

Towards the use of similarity distances to music genre classification: A comparative study.

Directory of Open Access Journals (Sweden)

Izaro Goienetxea

Full Text Available Music genre classification is a challenging research concept, for which open questions remain regarding classification approach, music piece representation, distances between/within genres, and so on. In this paper an investigation on the classification of generated music pieces is performed, based on the idea that grouping close related known pieces in different sets -or clusters- and then generating in an automatic way a new song which is somehow "inspired" in each set, the new song would be more likely to be classified as belonging to the set which inspired it, based on the same distance used to separate the clusters. Different music pieces representations and distances among pieces are used; obtained results are promising, and indicate the appropriateness of the used approach even in a such a subjective area as music genre classification is.

The Process of Leadership and the Organizational Knowledge Management: the practicy of the largest industries of Santa Catarina

Directory of Open Access Journals (Sweden)

Dante Marciano Girardi

2012-04-01

Full Text Available DOI: http://dx.doi.org/10.5007/2175-8077.2012v14n32p65 The aim of this article is to introduce the practices of leadership in the largest industries of Santa Catarina and their contribution to the Knowledge Management. The organization competitiveness is related to the people and to the capacity of the companies to improve the constant development of knowledge. Using the leadership, the managers and the People Management have created compromise and improved the results of the organizations. The adopted methodology followed the qualitative methodology, descriptive and applied research. There were interviewed the seven largest industries of the state of Santa Catarina, in number of collaborators. The data were analyzed by the technique of analysis of content. It has been observed that the leadership is present in the most of the studied companies, by the use of formal programs of development of leaders or of actions related to leadership. It is concluded that the companies have the focus in the people and in the knowledge, in bigger or smaller degree, but some of them are in phase of transition and revision of programs towards the development of their talents and of the Knowledge Management.

Robotics to Enable Older Adults to Remain Living at Home

OpenAIRE

Pearce, Alan J.; Adair, Brooke; Miller, Kimberly; Ozanne, Elizabeth; Said, Catherine; Santamaria, Nick; Morris, Meg E.

2012-01-01

Given the rapidly ageing population, interest is growing in robots to enable older people to remain living at home. We conducted a systematic review and critical evaluation of the scientific literature, from 1990 to the present, on the use of robots in aged care. The key research questions were as follows: (1) what is the range of robotic devices available to enable older people to remain mobile, independent, and safe? and, (2) what is the evidence demonstrating that robotic devices are effec...

Mummified remains from the Archaeological Museum in Zagreb, Croatia - Reviewing peculiarities and limitations of human and non-human radiological identification and analysis in mummified remains.

Science.gov (United States)

Petaros, Anja; Janković, Ivor; Cavalli, Fabio; Ivanac, Gordana; Brkljačić, Boris; Čavka, Mislav

2015-10-01

Forensic protocols and medico-legal techniques are increasingly being employed in investigations of museological material. The final findings of such investigations may reveal interesting facts on historical figures, customs and habits, as well as provide meaningful data for forensic use. Herein we present a case review where forensic experts were requested to identify taxonomic affinities, stage of preservation and provide skeletal analysis of mummified non-human archaeological remains, and verify whether two mummified hands are human or not. The manuscript offers a short review on the process and particularities of radiological species identification, the impact of post-mortem changes in the analysis and imaging of mummified remains as well as the macroscopical interpretation of trauma, pathology and authenticity in mummified remains, which can all turn useful when dealing with forensic cases. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Female urethral diverticulum presenting with acute urinary retention: Reporting the largest diverticulum with review of literature

Directory of Open Access Journals (Sweden)

Manas Ranjan Pradhan

2012-01-01

Full Text Available Female urethral diverticulum is a rare entity with diverse spectrum of clinical manifestations. It is a very rare cause of bladder outlet obstruction and should be considered as a differential diagnosis in females presenting with acute urinary retention associated with a vaginal mass. Strong clinical suspicion combined with thorough physical examination and focused radiological investigations are vital for its diagnosis. Herein we report a case of giant urethral diverticulum presenting with acute urinary retention in a young female. It was managed by excision and urethral closure, and is the largest urethral diverticulum reported till date in the literature.

Europe's largest solar thermal power plant. [200 kw thermal output supplemented by two 10-kw windmills

Energy Technology Data Exchange (ETDEWEB)

Bossel, U

1976-03-01

An overview is given over the solar heating plant which has recently been commissioned in the Camargue (France). This is the largest plant in Europe, with a mean heat output of about 200 kW, for the production of thermal energy from solar energy. The plant consists of 108 parabolic collectors (200 sq. metres) and 48 flat collectors (110 sq. metres). Two windmills with outputs of 10 kW each complete the system. The heat energy produced by the solar collectors is given up to 3 different stores, which in turn are connected to various consumers.

Standard test method for measurement of light reflectance value and small color differences between pieces of ceramic tile

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This test method covers the measurement of Light Reflectance Value (LRV) and visually small color difference between pieces of glazed or unglazed ceramic tile, using any spectrophotometer that meets the requirements specified in the test method. LRV and the magnitude and direction of the color difference are expressed numerically, with sufficient accuracy for use in product specification. 1.2 LRV may be measured for either solid-colored tile or tile having a multicolored, speckled, or textured surface. For tile that are not solid-colored, an average reading should be obtained from multiple measurements taken in a pattern representative of the overall sample as described in 9.2 of this test method. Small color difference between tiles should only be measured for solid-color tiles. Small color difference between tile that have a multicolored, speckled, or textured surface, are not valid. 1.3 For solid colored tile, a comparison of the test specimen and reference specimen should be made under incandescent, f...

Rewriting the Landform History of One of Africa's Three Largest Basins

Science.gov (United States)

Wilkinson, Justin

2014-01-01

The Kalahari Basin in southern Africa - one of the largest basins in Africa, along with the Congo and Chad basins - has attracted attention since David Livingstone traveled through the area in the 1840s. It is a semiarid desert with a large freshwater swampland known as the Okavango Swamp (150 km radius). This prominent megafan (a fan with radii >100 km), with its fingers of dark green forests projecting into the dun colors of the dunes of the Kalahari semi-desert, has been well photographed by astronauts over the years. The study area in the northern Kalahari basin is centered on the Okavango megafan of northwest Botswana, whose swampland has become well known as an African wildlife preserve of importance to biology and tourism alike. The Okavango River is unusual because it has deposited not one but two megafans along its course: the Okavango megafan and the Cubango megafan. The Okavango megafan is one of only three well-known megafans in Africa. Megafans on Earth were once thought to be rare, but recent research has documented 68 in Africa alone. Eleven megafans, plus three more candidates, have been documented in the area immediately surrounding the Okavango feature. These 11 megafans occupy the flattest and smoothest terrains adjacent to the neighboring upland and stand out as the darkest areas in the roughness map of the area. Megafan terrains occupy at least 200,000 sq km of the study area. The roughness map shown is based on an algorithm used first on Mars to quantify topographic roughness. Research of Earth's flattest terrains is just beginning with the aid of such maps, and it appears that these terrains are analogous to the flattest regions of Mars. Implications: 1. The variability in depositional style in each subbasin may apply Africa-wide: rift megafan length is dominated by rift width, whereas Owambo subbasin megafans are probably controlled by upland basin size; Zambezi subbasin megafans appear more like foreland basin types, with the position of

Field Note: Threatening Tonle Sap: Challenges for Southeast-Asia’s largest Freshwater Lake

Directory of Open Access Journals (Sweden)

Kuenzer, Claudia

2013-09-01

Full Text Available The Tonle Sap ecosystem in Cambodia is Southeast Asia’s largest freshwater lake; strongly impacted by the Mekong river flood pulse. The lake is home to exceptional biodiversity, and rural communities living in free floating villages on the lake and on its shores. The fragile niche ecosystems as well as the rural livelihoods of Tonle Sap are under severe threat. Overfishing, illegal wood harvesting, further resource exploitation, and water quality deterioration all impact the stability of the socio-ecological system of Tonle Sap. At the same time, expected flood pulse changes due to regulatory measures in the context of hydropower development upstream on the Mekong are a severe threat for Tonle Sap’s ecosystem stability. The area needs to shift into the focus of attention of national and international re-searchers, stakeholders, and decision makers, to find suitable pathways for a future sustainable development of this unique and pristine region.

Level of patient and operator dose in the largest cardiac centre in Greece

International Nuclear Information System (INIS)

Tsapaki, V.; Patsilinakos, S.; Voudris, V.; Magginas, A.; Pavlidis, S.; Maounis, T.; Theodorakis, G.; Koutelou, M.; Vrantza, T.; Nearchou, M.; Nikolaki, N.; Kollaros, N.; Kyrozi, E.; Kottou, S.; Karaiskos, P.; Neofotistou, E.; Cokkinos, D.

2008-01-01

The objective of this study was to investigate the patient and staff doses in the most frequent interventional cardiology (IC) procedures performed in Onassio, the largest Cardiac Centre in Greece. Data were collected from three digital X-ray systems for 212 coronary angiographies, 203 percutaneous transluminal coronary angio-plasties (PTCA) and 134 various electrophysiological studies. Patient skin dose was measured using suitably calibrated slow radiotherapy films and cardiologist dose using suitably calibrated thermoluminescent dosemeters placed on left arm, hand and foot. Patient median dose area product (DAP) (all examinations) ranged between 6.7 and 83.5 Gy cm 2 . Patient median skin dose in PTCA was 799 mGy (320-1660 mGy) and in RF ablation 160 mGy (35-1920 mGy). Median arm, hand and foot dose to the cardiologist were 12.6, 27 and 13 μSv, respectively, per procedure. The great range of radiation doses received by both patients and operators confirms the need for continuous monitoring of all IC techniques. (authors)

Using largest Lyapunov exponent to confirm the intrinsic stability of boiling water reactors

International Nuclear Information System (INIS)

Gavilian-Moreno, Carlos; Espinosa-Paredes, Gilberto

2016-01-01

The aim of this paper is the study of instability state of boiling water reactors with a method based in largest Lyapunov exponents (LLEs). Detecting the presence of chaos in a dynamical system is an important problem that is solved by measuring the LLE. Lyapunov exponents quantify the exponential divergence of initially close state-space trajectories and estimate the amount of chaos in a system. This method was applied to a set of signals from several nuclear power plant (NPP) reactors under commercial operating conditions that experienced instabilities events, apparently each of a different nature. Laguna Verde and Forsmark NPPs with in-phase instabilities, and Cofrentes NPP with out-of-phases instability. This study presents the results of intrinsic instability in the boiling water reactors of three NPPs. In the analyzed cases the limit cycle was not reached, which implies that the point of equilibrium exerts influence and attraction on system evolution

Using largest Lyapunov exponent to confirm the intrinsic stability of boiling water reactors

Energy Technology Data Exchange (ETDEWEB)

Gavilian-Moreno, Carlos [Iberdrola Generacion, S.A., Cofrentes Nuclear Power Plant, Project Engineering Department, Paraje le Plano S/N, Valencia (Spain); Espinosa-Paredes, Gilberto [Area de ingeniera en Recursos Energeticos, Universidad Autonoma Metropolitana-Iztapalapa, Mexico city (Mexico)

2016-04-15

The aim of this paper is the study of instability state of boiling water reactors with a method based in largest Lyapunov exponents (LLEs). Detecting the presence of chaos in a dynamical system is an important problem that is solved by measuring the LLE. Lyapunov exponents quantify the exponential divergence of initially close state-space trajectories and estimate the amount of chaos in a system. This method was applied to a set of signals from several nuclear power plant (NPP) reactors under commercial operating conditions that experienced instabilities events, apparently each of a different nature. Laguna Verde and Forsmark NPPs with in-phase instabilities, and Cofrentes NPP with out-of-phases instability. This study presents the results of intrinsic instability in the boiling water reactors of three NPPs. In the analyzed cases the limit cycle was not reached, which implies that the point of equilibrium exerts influence and attraction on system evolution.

Estimation of the largest enterprises’ impact on the socio-economic development of territories

Directory of Open Access Journals (Sweden)

Ekaterina Dmitrievna Razgulina

2014-07-01

Full Text Available The key basic trends of modern society development are associated with the transfer of some government functions to big business. Thus, scientific and public circles argue about social partnership between government, business and employees and offer different variants of the corporate social responsibility concept. The article presents the experience to assess social responsibility of business on the example of the largest chemical enterprises located in the Vologda and Novgorod oblasts. The evaluation results have revealed a number of problems hindering the formation of socially responsible behavior of enterprises, particularly the lack of standardized reporting on corporate social responsibility; provision of formal corporate social responsibility report; business’ non-system participation in social and economic development of territories. According to the authors, the development of a special model to regulate participants’ mutual relations can increase social responsibility of Russian business. Unified interests and resources of business and government promote the development of an agreed strategy in the field of regional social-economic development