Expected Utility and Entropy-Based Decision-Making Model for Large Consumers in the Smart Grid

Directory of Open Access Journals (Sweden)

Bingtuan Gao

2015-09-01

Full Text Available In the smart grid, large consumers can procure electricity energy from various power sources to meet their load demands. To maximize its profit, each large consumer needs to decide their energy procurement strategy under risks such as price fluctuations from the spot market and power quality issues. In this paper, an electric energy procurement decision-making model is studied for large consumers who can obtain their electric energy from the spot market, generation companies under bilateral contracts, the options market and self-production facilities in the smart grid. Considering the effect of unqualified electric energy, the profit model of large consumers is formulated. In order to measure the risks from the price fluctuations and power quality, the expected utility and entropy is employed. Consequently, the expected utility and entropy decision-making model is presented, which helps large consumers to minimize their expected profit of electricity procurement while properly limiting the volatility of this cost. Finally, a case study verifies the feasibility and effectiveness of the proposed model.

Utilization of Large Scale Surface Models for Detailed Visibility Analyses

Science.gov (United States)

Caha, J.; Kačmařík, M.

2017-11-01

This article demonstrates utilization of large scale surface models with small spatial resolution and high accuracy, acquired from Unmanned Aerial Vehicle scanning, for visibility analyses. The importance of large scale data for visibility analyses on the local scale, where the detail of the surface model is the most defining factor, is described. The focus is not only the classic Boolean visibility, that is usually determined within GIS, but also on so called extended viewsheds that aims to provide more information about visibility. The case study with examples of visibility analyses was performed on river Opava, near the Ostrava city (Czech Republic). The multiple Boolean viewshed analysis and global horizon viewshed were calculated to determine most prominent features and visibility barriers of the surface. Besides that, the extended viewshed showing angle difference above the local horizon, which describes angular height of the target area above the barrier, is shown. The case study proved that large scale models are appropriate data source for visibility analyses on local level. The discussion summarizes possible future applications and further development directions of visibility analyses.

Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India

Energy Technology Data Exchange (ETDEWEB)

Abhyankar, Nikit; Phadke, Amol

2011-01-20

Large-scale EE programs would modestly increase tariffs but reduce consumers' electricity bills significantly. However, the primary benefit of EE programs is a significant reduction in power shortages, which might make these programs politically acceptable even if tariffs increase. To increase political support, utilities could pursue programs that would result in minimal tariff increases. This can be achieved in four ways: (a) focus only on low-cost programs (such as replacing electric water heaters with gas water heaters); (b) sell power conserved through the EE program to the market at a price higher than the cost of peak power purchase; (c) focus on programs where a partial utility subsidy of incremental capital cost might work and (d) increase the number of participant consumers by offering a basket of EE programs to fit all consumer subcategories and tariff tiers. Large scale EE programs can result in consistently negative cash flows and significantly erode the utility's overall profitability. In case the utility is facing shortages, the cash flow is very sensitive to the marginal tariff of the unmet demand. This will have an important bearing on the choice of EE programs in Indian states where low-paying rural and agricultural consumers form the majority of the unmet demand. These findings clearly call for a flexible, sustainable solution to the cash-flow management issue. One option is to include a mechanism like FAC in the utility incentive mechanism. Another sustainable solution might be to have the net program cost and revenue loss built into utility's revenue requirement and thus into consumer tariffs up front. However, the latter approach requires institutionalization of EE as a resource. The utility incentive mechanisms would be able to address the utility disincentive of forgone long-run return but have a minor impact on consumer benefits. Fundamentally, providing incentives for EE programs to make them comparable to supply

Investigation and demonstration of dry carbon-based sorbent injection for mercury control. Quarterly technical report, July 1, 1996--September 31, 1996

Energy Technology Data Exchange (ETDEWEB)

Hunt, T.; Sjostrom, S.; Smith, J. [and others

1996-11-06

The overall objective of this two phase program is to investigate the use of dry carbon-based sorbents for mercury control. This information is important to the utility industry in anticipation of pending regulations. During Phase I, a bench-scale field test device that can be configured as an electrostatic precipitator, a pulse-jet baghouse, or a reverse-gas baghouse has been designed, built and integrated with an existing pilot-scale facility at PSCo`s Comanche Station. Up to three candidate sorbents will be injected into the flue gas stream upstream of the test device to and mercury concentration measurements will be made to determine the mercury removal efficiency for each sorbent. During the Phase II effort, component integration for the most promising dry sorbent technology shall be tested at the 5000 acfm pilot-scale.

Sodium bicarbonate in-duct injection with sodium sulfate recovery for SO2/NOx control

International Nuclear Information System (INIS)

Bennett, R.; Darmstaedter, E.

1991-01-01

Dry sodium injection with sodium bicarbonate has been used commercially at industrial sites since the mid 1980's. In the past three years, five full scale commercial demonstrations have been completed on electric utility coal fired units. Up to 75% SO 2 removal with 0-40% NO x removal has been achieved on units equipped with ESPs. Recent slip stream studies have proven up to 90% SO 2 removal and 25% NO x removal when injection is ahead of a baghouse. If dry sodium bicarbonate sorbent injection technology is used prior to a retrofitted baghouse, but after an existing ESP the sodium sulfate by-product/flyash mixture in the baghouse is over 90% Na 2 SO 4 . Simple filtration and crystallization will yield a high value 99% + pure Na 2 SO 4 for sale. In this application, no liquid discharge occurs and potentially no solids discharge, since flyash recovered from the filter is either recycled to the boiler with the coal stream or reinjected into the boiler. EPA IAPCS model Version 4 is modified to project costs for this SO 2 /NO x removal technology when couples with Na 2 SO 4 recovery. In this paper an example is used to show hardware requirements, consumables accountability, by-product recovery rates, capital costs and levelized costs

Utilization of AHWR critical facility for research and development work on large sample NAA

International Nuclear Information System (INIS)

Acharya, R.; Dasari, K.B.; Pujari, P.K.; Swain, K.K.; Reddy, A.V.R.; Verma, S.K.; De, S.K.

2014-01-01

The graphite reflector position of AHWR critical facility (CF) was utilized for analysis of large size (g-kg scale) samples using internal mono standard neutron activation analysis (IM-NAA). The reactor position was characterized by cadmium ratio method using In monitor for total flux and sub cadmium to epithermal flux ratio (f). Large sample neutron activation analysis (LSNAA) work was carried out for samples of stainless steel, ancient and new clay potteries and dross. Large as well as non-standard geometry samples (1 g - 0.5 kg) were irradiated. Radioactive assay was carried out using high resolution gamma ray spectrometry. Concentration ratios obtained by IM-NAA were used for provenance study of 30 clay potteries, obtained from excavated Buddhist sites of AP, India. Concentrations of Au and Ag were determined in not so homogeneous three large size samples of dross. An X-Z rotary scanning unit has been installed for counting large and not so homogeneous samples. (author)

Correction: Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4

DEFF Research Database (Denmark)

Jensen, Søren Højgaard; Graves, Christopher R.; Mogensen, Mogens Bjerg

2017-01-01

Correction for ‘Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4’ by S. H. Jensen et al., Energy Environ. Sci., 2015, 8, 2471–2479.......Correction for ‘Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4’ by S. H. Jensen et al., Energy Environ. Sci., 2015, 8, 2471–2479....

SOx-NOx-Rox Box{trademark} flue gas clean-up demonstration. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

Babcock and Wilcox`s (B and W) SOx-NOx-Rox Box{trademark} process effectively removes SOx, NOx and particulate (Rox) from flue gas generated from coal-fired boilers in a single unit operation, a high temperature baghouse. The SNRB technology utilizes dry sorbent injection upstream of the baghouse for removal of SOx and ammonia injection upstream of a zeolitic selective catalytic reduction (SCR) catalyst incorporated in the baghouse to reduce NOx emissions. Because the SOx and NOx removal processes require operation at elevated gas temperatures (800--900 F) for high removal efficiency, high-temperature fabric filter bags are used in the baghouse. The SNRB technology evolved from the bench and laboratory pilot scale to be successfully demonstrated at the 5-MWe field scale. This report represents the completion of Milestone M14 as specified in the Work Plan. B and W tested the SNRB pollution control system at a 5-MWe demonstration facility at Ohio Edison`s R.E. Burger Plant located near Shadyside, Ohio. The design and operation were influenced by the results from laboratory pilot testing at B and W`s Alliance Research Center. The intent was to demonstrate the commercial feasibility of the SNRB process. The SNRB facility treated a 30,000 ACFM flue gas slipstream from Boiler No. 8. Operation of the facility began in May 1992 and was completed in May 1993. About 2,300 hours of high-temperature operation were achieved. The main emissions control performance goals of: greater than 70% SO{sub 2} removal using a calcium-based sorbent; greater than 90% NOx removal with minimal ammonia slip; and particulate emissions in compliance with the New Source Performance Standards (NSPS) of 0.03 lb/million Btu were exceeded simultaneously in the demonstration program when the facility was operated at optimal conditions. Testing also showed significant reductions in emissions of some hazardous air pollutants.

SAMPLING, ANALYSIS, AND PROPERTIES OF PRIMARY PM-2.5: APPLICATION TO COAL-FIRED UTILITY BOILERS

Energy Technology Data Exchange (ETDEWEB)

Allen L. Robinson; Spyros N. Pandis; Eric Lipsky; Charles Stainer; Natalie Anderson; Satoshi Takahama; Sarah Rees

2003-02-01

A dilution sampler was used to examine the effects of dilution ratio and residence time on the particulate emissions from a pilot-scale pulverized coal combustor. Measurements include the particle size distribution from 0.003 to 2.5 {micro}m, PM{sub 2.5} mass emission rate and PM2.5 composition (OC/EC, major ions, and elemental). Hot filter samples were also collected simultaneously in order to compare the dilution sampler measurement with standard stack sampling methodologies such as EPA Method 5. Measurements were made both before and after the bag-house, the particle control device used on the coal combustor. Measurements were made with three different coal types and a coal-biomass blend. The residence time and dilution ratio do not influence the PM{sub 2.5} mass emission rate, but have a significant effect on the size distribution and total number emissions. Measurements made before the bag-house showed increasing the residence time dramatically decreases the total particle number concentration, and shifts the particle mass to larger sizes. The effects of residence time can be explained quantitatively by the coagulation of the emitted particles. Measurements made after the bag-house were not affected by coagulation due to the lower concentration of particles. Nucleation of sulfuric acid vapor within the dilution was an important source of ultrafine particles. This nucleation is strongly a function of dilution ratio because of the competition between condensation and nucleation. At low dilution ratios condensation dominates and little nucleation is observed; increasing the dilution ratio promotes nucleation because of the corresponding decrease in available surface area per unit volume for condensation. No nucleation was observed after the bag house where conditions greatly favor nucleation over condensation; we suspect that the bag house removed the SO{sub 3} in the flue gas. Exhaust SO{sub 3} levels were not measured during these experiments. Dilution caused

Effects of Mental Health Parity on High Utilizers of Services: Pre-Post Evidence From a Large, Self-Insured Employer.

Science.gov (United States)

Grazier, Kyle L; Eisenberg, Daniel; Jedele, Jenefer M; Smiley, Mary L

2016-04-01

This study evaluated utilization of mental health and substance use services among enrollees at a large employee health plan following changes to benefit limits after passage in 2008 of federal mental health parity legislation. This study used a pre-post design. Benefits and claims data for 43,855 enrollees in the health plan in 2009 and 2010 were analyzed for utilization and costs after removal of a 30-visit cap on the number of covered mental health visits. There was a large increase in the proportion of health plan enrollees with more than 30 outpatient visits after the cap's removal, an increase of 255% among subscribers and 176% among dependents (pbenefit limit.

Utilization of large electromagnetic pumps in the fast breeder reactors

International Nuclear Information System (INIS)

Deverge, C.; Lefrere, J.P.; Peturaud, P.; Sauvage, M.

1984-04-01

After an overview concerning the induction annular electromagnetic pumps and the dimensioning methods usually utilized, development of these components for a fast breeder integrated reactor is considered: - utilization of cooled EMP in the intermediate circuit, - utilization of immersed pumps, coupled with the intermediate exchanger, for the primary pumping; dimensioning, energetic aspects, and effects on the power plant geometrical configurations [fr

Combustion and heat transfer monitoring in large utility boilers

Energy Technology Data Exchange (ETDEWEB)

Diez, L.I.; Cortes, C.; Arauzo, I.; Valero, A. [University of Zaragoza, Zaragoza (Spain). Center of Power Plant Efficiency Research

2001-05-01

The optimization and control of complex energy systems can presently take advantage of highly sophisticated engineering techniques, such as CFD calculations and correlation algorithms based on artificial intelligence concepts. However, the most advanced numerical prediction still relies on strong simplifications of the exact transport equations. Likewise, the output of a neural network is actually based on a long record of observed past responses. Therefore, the implementation of modern diagnosis tools generally requires a great amount of experimental data, in order to achieve an adequate validation of the method. Consequently, a sort of paradox results, since the validation data cannot be less accurate or complete than the predictions sought. To remedy this situation, there are several alternatives. In contrast to laboratory work or well-instrumented pilot plants, the information obtained in the full scale installation offers the advantages of realism and low cost. This paper presents the case-study of a large, pulverized-coal fired utility boiler, discussing both the evaluation of customary measurements and the adoption of supplementary instruments. The generic outcome is that it is possible to significantly improve the knowledge on combustion and heat transfer performance within a reasonable cost. Based on the experience and results, a general methodology is outlined to cope with this kind of analysis.

Survey and analysis of selected jointly owned large-scale electric utility storage projects

Energy Technology Data Exchange (ETDEWEB)

1982-05-01

The objective of this study was to examine and document the issues surrounding the curtailment in commercialization of large-scale electric storage projects. It was sensed that if these issues could be uncovered, then efforts might be directed toward clearing away these barriers and allowing these technologies to penetrate the market to their maximum potential. Joint-ownership of these projects was seen as a possible solution to overcoming the major barriers, particularly economic barriers, of commercializaton. Therefore, discussions with partners involved in four pumped storage projects took place to identify the difficulties and advantages of joint-ownership agreements. The four plants surveyed included Yards Creek (Public Service Electric and Gas and Jersey Central Power and Light); Seneca (Pennsylvania Electric and Cleveland Electric Illuminating Company); Ludington (Consumers Power and Detroit Edison, and Bath County (Virginia Electric Power Company and Allegheny Power System, Inc.). Also investigated were several pumped storage projects which were never completed. These included Blue Ridge (American Electric Power); Cornwall (Consolidated Edison); Davis (Allegheny Power System, Inc.) and Kttatiny Mountain (General Public Utilities). Institutional, regulatory, technical, environmental, economic, and special issues at each project were investgated, and the conclusions relative to each issue are presented. The major barriers preventing the growth of energy storage are the high cost of these systems in times of extremely high cost of capital, diminishing load growth and regulatory influences which will not allow the building of large-scale storage systems due to environmental objections or other reasons. However, the future for energy storage looks viable despite difficult economic times for the utility industry. Joint-ownership can ease some of the economic hardships for utilites which demonstrate a need for energy storage.

Non toxic additives for improved fabric filter performance

Energy Technology Data Exchange (ETDEWEB)

Bustard, C.J.; Baldrey, K.E.; Ebner, T.G. [ADA Technologies, Inc., Englewood, CO (United States)] [and others

1995-11-01

The overall objective of this three-phase Small Business innovative Research (SBIR) program funded by the Department of Energy pittsburgh Energy Technology Center (PETC) is to commercialize a technology based upon the use of non-toxic, novel flue gas conditioning agents to improve particulate air toxic control and overall fabric filter performance. The ultimate objective of the Phase II program currently in progress is to demonstrate that the candidate additives are successful at full-scale on flue gas from a coal-fired utility boiler. This paper covers bench-scale field tests conducted during the period February through May, 1995. The bench-scale additives testing was conducted on a flue gas slipstream taken upstream of the existing particulate control device at a utility power plant firing a Texas lignite coal. These tests were preceded by extensive testing with additives in the laboratory using a simulated flue gas stream and re-dispersed flyash from the same power plant. The bench-scale field testing was undertaken to demonstrate the performance with actual flue gas of the bet candidate additives previously identified in the laboratory. Results from the bench-scale tests will be used to establish operating parameters for a larger-scale demonstration on either a single baghouse compartment or a full baghouse at the same site.

Low Temperature Particle Filtration of Wood Gas with Low Tar Content

DEFF Research Database (Denmark)

Hindsgaul, Claus; Henriksen, Ulrik Birk; Bentzen, Jens Dall

2002-01-01

Baghouse filters and cartridge filters were tested online with wood gas from a two stage down draft gasifier. The gas contained soot and very low levels (10-30 mg/Nm³) of tar. Particle collection efficiencies were above 95%. Continuous operation with cheap self cleaning baghouse filters were test...

40 CFR 63.11465 - What are the standards for new and existing sources?

Science.gov (United States)

2010-07-01

... Metals Processing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11465 What are the... through a fabric filter or baghouse that achieves a particulate matter (PM) control efficiency of at least... affected source through a fabric filter or baghouse that achieves a PM control efficiency of at least 99.5...

Combustion and heat transfer monitoring in large utility boilers

Energy Technology Data Exchange (ETDEWEB)

Ignacio Diez, L.; Cortes, C.; Arauzo, I.; Valero, A. [Zaragoza Univ., Centro de Investigacion del rendimiento de Centrales Electricas (CIRCE) (Spain)

2001-05-01

As a result of the quick and vast development of instrumentation and software capabilities, the optimization and control of complex energy systems can presently take advantage of highly sophisticated engineering techniques, such as CFD calculations and correlation algorithms based on artificial intelligence concepts. However, the most advanced numerical prediction still relies on strong simplifications of the exact transport equations. Likewise, the output of a neural network, or any other refined data-processing device, is actually based in a long record of observed past responses. Therefore, the implementation of modern diagnosis tools generally requires a great amount of experimental data, in order to achieve an adequate validation of the method. Consequently, a sort of paradox results, since the validation data cannot be less accurate or complete than the predictions sought. To remedy this situation, there are several alternatives. In opposition to laboratory work or well-instrumented pilot plants, the information obtained in the full scale installation offers the advantages of realism and low cost. This paper presents the case-study of a large, pulverized-coal fired utility boiler, discussing both the evaluation of customary measurements and the adoption of supplementary instruments. The generic outcome is that it is possible to significantly improve the knowledge on combustion and heat transfer performance within a reasonable cost. Based on the experience and results, a general methodology is outlined to cope with this kind of analysis. (author)

Modeling and Validating Time, Buffering, and Utilization of a Large-Scale, Real-Time Data Acquisition System

CERN Document Server

AUTHOR|(SzGeCERN)756497; The ATLAS collaboration; Garcia Garcia, Pedro Javier; Vandelli, Wainer; Froening, Holger

2017-01-01

Data acquisition systems for large-scale high-energy physics experiments have to handle hundreds of gigabytes per second of data, and are typically realized as specialized data centers that connect a very large number of front-end electronics devices to an event detection and storage system. The design of such systems is often based on many assumptions, small-scale experiments and a substantial amount of over-provisioning. In this work, we introduce a discrete event-based simulation tool that models the data flow of the current ATLAS data acquisition system, with the main goal to be accurate with regard to the main operational characteristics. We measure buffer occupancy counting the number of elements in buffers, resource utilization measuring output bandwidth and counting the number of active processing units, and their time evolution by comparing data over many consecutive and small periods of time. We perform studies on the error of simulation when comparing the results to a large amount of real-world ope...

Modeling and Validating Time, Buffering, and Utilization of a Large-Scale, Real-Time Data Acquisition System

CERN Document Server

AUTHOR|(SzGeCERN)756497; The ATLAS collaboration; Garcia Garcia, Pedro Javier; Vandelli, Wainer; Froening, Holger

2017-01-01

Data acquisition systems for large-scale high-energy physics experiments have to handle hundreds of gigabytes per second of data, and are typically implemented as specialized data centers that connect a very large number of front-end electronics devices to an event detection and storage system. The design of such systems is often based on many assumptions, small-scale experiments and a substantial amount of over-provisioning. In this paper, we introduce a discrete event-based simulation tool that models the dataflow of the current ATLAS data acquisition system, with the main goal to be accurate with regard to the main operational characteristics. We measure buffer occupancy counting the number of elements in buffers; resource utilization measuring output bandwidth and counting the number of active processing units, and their time evolution by comparing data over many consecutive and small periods of time. We perform studies on the error in simulation when comparing the results to a large amount of real-world ...

Mercury Control With The Advanced Hybrid Particulate Collector

International Nuclear Information System (INIS)

Stanley J. Miller; Ye Zhuang; Jay C. Almlie

2004-01-01

This project was awarded under U.S. Department of Energy (DOE) National Energy Technology Laboratory Program Solicitation DE-FC26-01NT41184 and specifically addresses Technical Topical Area 4 - Testing Novel and Less Mature Control Technologies on Actual Flue Gas at the Pilot Scale. The project team included the Energy and Environmental Research Center as the main contractor; W.L. Gore and Associates, Inc., as a technical and financial partner; and the Big Stone Plant operated by Otter Tail Power Company, host for the field-testing portion of the research. Since 1995, DOE has supported development of a new concept in particulate control called the advanced hybrid particulate collector (AHPC). The AHPC has been licensed to W.L. Gore and Associates, Inc., and is marketed as the Advanced Hybrid(trademark) filter by Gore. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in a unique configuration, providing major synergism between the two collection methods, both in the particulate collection step and in the transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and it solves the problem of reentrainment and re-collection of dust in conventional baghouses. The AHPC also appears to have unique advantages for mercury control over baghouses or ESPs as an excellent gas--solid contactor. The objective of the original five-task project was to demonstrate 90% total mercury control in the AHPC at a lower cost than current mercury control estimates. The approach included benchscale batch tests, larger-scale pilot testing with real flue gas on a coal-fired combustion system, and field demonstration at the 2.5-MW scale at a utility power plant to prove scale-up and demonstrate longer-term mercury control. The scope of work was modified to include an additional sixth task, initiated in April 2003. The objective of this task was to

Utilization of lunar materials and expertise for large scale operations in space: Abstracts. [lunar bases and space industrialization

Science.gov (United States)

Criswell, D. R. (Editor)

1976-01-01

The practicality of exploiting the moon, not only as a source of materials for large habitable structures at Lagrangian points, but also as a base for colonization is discussed in abstracts of papers presented at a special session on lunar utilization. Questions and answers which followed each presentation are included after the appropriate abstract. Author and subject indexes are provided.

LARGE-SCALE MECURY CONTROL TECHNOLOGY TESTING FOR LIGNITE-FIRED UTILITIES-OXIDATION SYSTEMS FOR WET FGD

Energy Technology Data Exchange (ETDEWEB)

Michael J. Holmes; Steven A. Benson; Jeffrey S. Thompson

2004-03-01

The Energy & Environmental Research Center (EERC) is conducting a consortium-based effort directed toward resolving the mercury (Hg) control issues facing the lignite industry. Specifically, the EERC team--the EERC, EPRI, URS, ADA-ES, Babcock & Wilcox, the North Dakota Industrial Commission, SaskPower, and the Mercury Task Force, which includes Basin Electric Power Cooperative, Otter Tail Power Company, Great River Energy, Texas Utilities (TXU), Montana-Dakota Utilities Co., Minnkota Power Cooperative, BNI Coal Ltd., Dakota Westmoreland Corporation, and the North American Coal Company--has undertaken a project to significantly and cost-effectively oxidize elemental mercury in lignite combustion gases, followed by capture in a wet scrubber. This approach will be applicable to virtually every lignite utility in the United States and Canada and potentially impact subbituminous utilities. The oxidation process is proven at the pilot-scale and in short-term full-scale tests. Additional optimization is continuing on oxidation technologies, and this project focuses on longer-term full-scale testing. The lignite industry has been proactive in advancing the understanding of and identifying control options for Hg in lignite combustion flue gases. Approximately 1 year ago, the EERC and EPRI began a series of Hg-related discussions with the Mercury Task Force as well as utilities firing Texas and Saskatchewan lignites. This project is one of three being undertaken by the consortium to perform large-scale Hg control technology testing to address the specific needs and challenges to be met in controlling Hg from lignite-fired power plants. This project involves Hg oxidation upstream of a system equipped with an electrostatic precipitator (ESP) followed by wet flue gas desulfurization (FGD). The team involved in conducting the technical aspects of the project includes the EERC, Babcock & Wilcox, URS, and ADA-ES. The host sites include Minnkota Power Cooperative Milton R. Young

Assessing Residential Customer Satisfaction for Large Electric Utilities

OpenAIRE

Lea Kosnik; L. Douglas Smith; Satish Nayak; Maureen Karig; Mark Konya; Kristy Lovett; Zhennan Liu; Harrison Luvai

2015-01-01

Electric utilities, like other service organizations, rely on customer surveys to assess the quality of their services and customer relations. With responses to an in-depth survey of 2,216 residential customers, complementary data from geo-coded public sources, aggregate assessments of performance by J.D. Power & Associates from their independent surveys, historical records of individual customer usage and bill payments, streams of published media content and records of actual service deliver...

Aeroelastic analysis of an offshore wind turbine: Design and Fatigue Performance of Large Utility-Scale Wind Turbine Blades

OpenAIRE

Fossum, Peter Kalsaas

2012-01-01

Aeroelastic design and fatigue analysis of large utility-scale wind turbine blades are performed. The applied fatigue model is based on established methods and is incorporated in an iterative numerical design tool for realistic wind turbine blades. All aerodynamic and structural design properties are available in literature. The software tool FAST is used for advanced aero-servo-elastic load calculations and stress-histories are calculated with elementary beam theory.According to wind energy ...

Recent developments in particulate control with low-rank fuels

International Nuclear Information System (INIS)

Miller, S.J.; Laudal, D.L.

1991-01-01

Regulations appear to be focusing on fine particle emissions rather than total mass particulate emissions. There is concern that electrostatic precipitators (ESPs) may not be able to meet potentially stricter finer particle emission standards. A new development in the area of fabric filtration is the use of flue gas-conditioning agents to reduce particulate emissions and pressure drop. Theoretical analysis of the factors that control the size of a baghouse indicates that pulse-jet baghouses can be designed to operate at much higher air-to-cloth ratios than is currently employed. To help optimize performance of both ESPs and baghouses, quantitative characterization of the cohesive properties of fly ash is necessary. Appropriate methods are determination of aerated and packed porosity and measurement of tensile strength as a function of porosity

The Potential and Utilization of Unused Energy Sources for Large-Scale Horticulture Facility Applications under Korean Climatic Conditions

Directory of Open Access Journals (Sweden)

In Tak Hyun

2014-07-01

Full Text Available As the use of fossil fuel has increased, not only in construction, but also in agriculture due to the drastic industrial development in recent times, the problems of heating costs and global warming are getting worse. Therefore, introduction of more reliable and environmentally-friendly alternative energy sources has become urgent and the same trend is found in large-scale horticulture facilities. In this study, among many alternative energy sources, we investigated the reserves and the potential of various different unused energy sources which have infinite potential, but are nowadays wasted due to limitations in their utilization. In addition, we utilized available unused energy as a heat source for a heat pump in a large-scale horticulture facility and analyzed its feasibility through EnergyPlus simulation modeling. Accordingly, the discharge flow rate from the Fan Coil Unit (FCU in the horticulture facility, the discharge air temperature, and the return temperature were analyzed. The performance and heat consumption of each heat source were compared with those of conventional boilers. The result showed that the power load of the heat pump was decreased and thus the heat efficiency was increased as the temperature of the heat source was increased. Among the analyzed heat sources, power plant waste heat which had the highest heat source temperature consumed the least electric energy and showed the highest efficiency.

Utility of large spot binocular indirect laser delivery for peripheral photocoagulation therapy in children.

Science.gov (United States)

Balasubramaniam, Saranya C; Mohney, Brian G; Bang, Genie M; Link, Thomas P; Pulido, Jose S

2012-09-01

The purpose of this article is to demonstrate the utility of the large spot size (LSS) setting using a binocular laser indirect delivery system for peripheral ablation in children. One patient with bilateral retinopathy of prematurity received photocoagulation with standard spot size burns placed adjacently to LSS burns. Using a pixel analysis program called Image J on the Retcam picture, the areas of each retinal spot size were determined in units of pixels, giving a standard spot range of 805 to 1294 pixels and LSS range of 1699 to 2311 pixels. Additionally, fluence was calculated using theoretical retinal areas produced by each spot size: the standard spot setting was 462 mJ/mm2 and the LSS setting was 104 mJ/mm2. For eyes with retinopathy of prematurity, our study shows that LSS laser indirect delivery halves the number of spots required for treatment and reduces fluence by almost one-quarter, producing more uniform spots.

Present status of research on radiation utilization in 1994 at JAERI. Utilization of irradiation and RI production and utilization

International Nuclear Information System (INIS)

1994-10-01

In Japan Atomic Energy Research Institute, Takasaki Radiation Chemistry Research Establishment is in charge of the utilization of irradiation, and Tokai Research Establishment is in charge of the production and utilization of radioisotopes. As for the utilization of irradiation the development of new polymers, the development of environment preservation technology such as flue gas treatment, and by using various ion beams from four accelerators, the development of the materials used for space environment, nuclear fusion and new functional materials, the research on the radiation application to biotechnology, the development of the production and utilization of new radioisotopes have been carried out. As for the production and utilization of radioisotopes, the development of new products and new utilization techniques, the technology of producing and using a large amount of tritium, and the research on the chemical behavior of tritium have been carried out. The international cooperations have been promoted positively. In this report, the research activities in 1994 are described. (K.I.)

Effect of large aspect ratio of biomass particles on carbon burnout in a utility boiler

Energy Technology Data Exchange (ETDEWEB)

D. Gera; M.P. Mathur; M.C. Freeman; Allen Robinson [Fluent, Inc./NETL, Morgantown, WV (United States)

2002-12-01

This paper reports on the development and validation of comprehensive combustion sub models that include the effect of large aspect ratio of biomass (switchgrass) particles on carbon burnout and temperature distribution inside the particles. Temperature and carbon burnout data are compared from two different models that are formulated by assuming (i) the particles are cylindrical and conduct heat internally, and (ii) the particles are spherical without internal heat conduction, i.e., no temperature gradient exists inside the particle. It was inferred that the latter model significantly underpredicted the temperature of the particle and, consequently, the burnout. Additionally, some results from cofiring biomass (10% heat input) with pulverized coal (90% heat input) are compared with the pulverized coal (100% heat input) simulations and coal experiments in a tangentially fired 150 MW{sub e} utility boiler. 26 refs., 7 figs., 4 tabs.

Impact of large-scale energy efficiency programs on utility finances and consumer tariffs in India

International Nuclear Information System (INIS)

Abhyankar, Nikit; Phadke, Amol

2012-01-01

The objective of this paper is to analyze the effect on utility finances and consumer tariffs of implementing utility-funded demand-side energy efficiency (EE) programs in India. We use the state of Delhi as a case study. We estimate that by 2015, the electric utilities in Delhi can potentially save nearly 14% of total sales. We examine the impacts on utility finances and consumer tariffs by developing scenarios that account for variations in the following factors: (a) incentive mechanisms for mitigating the financial risk of utilities, (b) whether utilities fund the EE programs only partially, (c) whether utilities sell the conserved electricity into spot markets and (d) the level of power shortages utilities are facing. We find that average consumer tariff would increase by 2.2% although consumers participating in EE programs benefit from reduction in their electricity consumption. While utility incentive mechanisms can mitigate utilities’ risk of losing long-run returns, they cannot address the risk of consistently negative cash flow. In case of power shortages, the cash flow risk is amplified (reaching up to 57% of utilities annual returns) and is very sensitive to marginal tariffs of consumers facing power shortages. We conclude by proposing solutions to mitigate utility risks. - Highlights: ► We model implementation of energy efficiency (EE) programs in Delhi, India. ► We examine the impact on utility finances and consumer tariffs from 2012 to 2015. ► We find that average consumer tariffs increase but participating consumers benefit. ► Existing regulatory mechanisms cannot address utilities’ risk of negative cash flow. ► Frequent true-ups or ex-ante revenue adjustment is required to address such risk.

Field Test Program for Long-Term Operation of a COHPAC System for Removing Mercury from Coal-Fired Flue Gas

Energy Technology Data Exchange (ETDEWEB)

C. Jean Bustard; Charles Lindsey; Paul Brignac

2006-05-01

This document provides a summary of the full-scale demonstration efforts involved in the project ''Field Test Program for Long-Term Operation of a COHPAC{reg_sign} System for Removing Mercury from Coal-Fired Flue Gas''. The project took place at Alabama Power's Plant Gaston Unit 3 and involved the injection of sorbent between an existing particulate collector (hot-side electrostatic precipitators) and a COHPAC{reg_sign} fabric filter (baghouse) downstream. Although the COHPAC{reg_sign} baghouse was designed originally for polishing the flue gas, when activated carbon injection was added, the test was actually evaluating the EPRI TOXECON{reg_sign} configuration. The results from the baseline tests with no carbon injection showed that the cleaning frequency in the COHPAC{reg_sign} unit was much higher than expected, and was above the target maximum cleaning frequency of 1.5 pulses/bag/hour (p/b/h), which was used during the Phase I test in 2001. There were times when the baghouse was cleaning continuously at 4.4 p/b/h. In the 2001 tests, there was virtually no mercury removal at baseline conditions. In this second round of tests, mercury removal varied between 0 and 90%, and was dependent on inlet mass loading. There was a much higher amount of ash exiting the electrostatic precipitators (ESP), creating an inlet loading greater than the design conditions for the COHPAC{reg_sign} baghouse. Tests were performed to try to determine the cause of the high ash loading. The LOI of the ash in the 2001 baseline tests was 11%, while the second baseline tests showed an LOI of 17.4%. The LOI is an indication of the carbon content in the ash, which can affect the native mercury uptake, and can also adversely affect the performance of ESPs, allowing more ash particles to escape the unit. To overcome this, an injection scheme was implemented that balanced the need to decrease carbon injection during times when inlet loading to the baghouse was high and

National Utility Rate Database: Preprint

Energy Technology Data Exchange (ETDEWEB)

Ong, S.; McKeel, R.

2012-08-01

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Advanced large-capacity commercial technology for multi-pollutant control

Energy Technology Data Exchange (ETDEWEB)

Graf, R.E. [Wulff Deutschland GmbH, Rosbach (Germany); Seitz, A. [Teplama Strakonice, a.s. (Czech Republic); Xia Fan Gao [Guangzhou Hengyun Enterprises Holiday, Ltd. (China)

2003-09-01

The presentation describes the application in commercial installations in Europe and China of circulating fluid bed (CFB) scrubbers of advanced GRAF/WULFF technology design, retrofitted to coal-fired steam boilers. Details are presented of design and operating experience with installations of CFB scrubbers that efficiently remove diverse pollutants down to and below the required and permitted levels. The paper describes successful solutions to substantial operating problems encountered at a CFB scrubbing plant. The described flue gas scrubbing plants of this simple system design clean the flue gases from boilers comprising units of a capacity of 100 to 300 MW using a single-train scrubbing system arrangement. Specifically, the simultaneous high rates of removal of multipollutants are, e.g., SO{sub 2}>98%, SO{sub 3}>99%, HF > 99%, HCl > 98%, mercury > 95%, and particulate matter > 99.99%. These pollutants are removed in a single scrubber module in combination, downstream, with baghouse or electrostatic precipitator means of dedusting. Information is given on rates and design of a single-module, 660 MW system as would be applied to a coal-fired power plant facility. (orig.)

Utility of temporary aftershock warning system in the immediate aftermath of large damaging earthquakes

International Nuclear Information System (INIS)

Harben, P.E.; Jarpe, S.P.; Hunter, S.; Johnston, C.A.

1993-01-01

An aftershock warning system (AWS) is a real-time warning system that is deployed immediately after a large damaging earthquake in the epicentral region of the main shock. The primary purpose of such a system is to warn rescue teams and workers within damaged structures of imminent destructive shaking. The authors have examined the utility of such a system (1) by evaluating historical data, and (2) by developing and testing a prototype system during the 1992 Landers, California, aftershock sequence. Analyzing historical data is important in determining when and where damaging aftershocks are likely to occur and the probable usefulness of an AWS in a particular region. As part of this study, they analyzed the spatial and temporal distribution of large (magnitude >5.0) aftershocks from earthquakes with magnitudes >6.0 that took place between 1942 and 1991 in California and Nevada. They found that one-quarter of these large aftershocks occurred from 2 days-2 months after the main event, nearly one-half occurred within the first two days of the main event, and greater than one-half occurred within 20 km of the main shock's epicenter. They also reviewed a case study of the 1985 Mexico City earthquake, which showed that an AWS could have given Mexico City a warning of ∼60 sec before the magnitude 7.6 aftershock that occurred 36 hr. after the main event. They deployed a four-station prototype AWS near Landers after a magnitude 7.4 earthquake occurred on June 28, 1992. The aftershock data, collected from July 3-10, showed that the aftershocks in the vicinity of the four stations varied in magnitude from 3.0-4.4. Using a two-station detection criterion to minimize false alarms, this AWS reliably discriminated between smaller and larger aftershocks within 3 sec of the origin time of the events. This prototype could have provided 6 sec of warning to Palm Springs and 20 sec of warning to San Bernardino of aftershocks occurring in the main-shock epicentral region

Antithrombotic Utilization Trends after Noncardioembolic Ischemic Stroke or TIA in the Setting of Large Antithrombotic Trials (2002–2009)

Science.gov (United States)

Khan, Amir S.; Qureshi, Adnan I.

2015-01-01

Background and Purpose Several large trials published over the last decade have significantly altered recommended guidelines for therapy following a noncardioembolic ischemic stroke or transient ischemic attack (TIA). The impact of these studies on patient usage of alternative antithrombotic agents has hitherto not been evaluated. We examined the usage of these agents in the United States over the last decade, with regard to the publication of the Management of Atherothrombosis with Clopidogrel in High-Risk Patients (MATCH), European/Australasian Stroke Prevention in Reversible Ischaemia Trial (ESPRIT), and Prevention Regimen for Effectively Avoiding Second Strokes (PRoFESS) clinical trials, in order to test the hypothesis that resulting recommendations are reflected in usage trends. Methods Antithrombotic utilization was prospectively collected as part of the National Ambulatory Medical Care Survey (NAMCS) on a total of 53,608,351 patients in the United States between 2002 and 2009. Patients with a history of ischemic stroke or TIA were included. Patients were excluded if there was a prior history of subarachnoid or intracerebral hemorrhage, or if other indications for antithrombotic treatment were present, including deep venous thrombosis, pulmonary embolism, atrial fibrillation or flutter, mechanical cardiac valve replacement, congestive heart failure, coronary artery disease, peripheral arterial disease, and rheumatoid arthritis. Annual utilization of the following antithrombotic strategies was compared in 53,608,351 patients: 1) aspirin monotherapy, 2) clopidogrel monotherapy, 3) combined clopidogrel and aspirin, 4) combined extended-release dipyridamole (ERDP) and aspirin, and 5) warfarin. Annual utilization was compared before and after publication of MATCH, ESPRIT, and PRoFESS in 2004, 2006, and 2008, respectively. Trend analysis was performed with the Mantel–Haenszel test for trends. Sensitivity analysis of demographic and clinical characteristics

Laparoscopic Removal of a Large Ovarian Mass Utilizing Planned Trocar Puncture

OpenAIRE

Stitely, Michael L.

2012-01-01

Background: Large cystic ovarian masses pose technical challenges to the laparoscopic surgeon. Removing large, potentially malignant specimens must be done with care to avoid the leakage of cyst fluid into the abdominal cavity. Case: We present the case of a large ovarian cystic mass treated laparoscopically with intentional trocar puncture of the mass to drain and remove the mass. Discussion: Large cystic ovarian masses can be removed laparoscopically with intentional trocar puncture of the ...

Field Testing of Activated Carbon Injection Options for Mercury Control at TXU's Big Brown Station

Energy Technology Data Exchange (ETDEWEB)

John Pavlish; Jeffrey Thompson; Christopher Martin; Mark Musich; Lucinda Hamre

2009-01-07

the time that enhanced AC was injected, the average mercury removal for the month long test was approximately 74% across the test baghouse module. ACI was interrupted frequently during the month long test because the test baghouse module was bypassed frequently to relieve differential pressure. The high air-to-cloth ratio of operations at this unit results in significant differential pressure, and thus there was little operating margin before encountering differential pressure limits, especially at high loads. This limited the use of sorbent injection as the added material contributes to the overall differential pressure. This finding limits sustainable injection of AC without appropriate modifications to the plant or its operations. Handling and storage issues were observed for the TOXECON ash-AC mixture. Malfunctioning equipment led to baghouse dust hopper plugging, and storage of the stagnant material at flue gas temperatures resulted in self-heating and ignition of the AC in the ash. In the hoppers that worked properly, no such problems were reported. Economics of mercury control at Big Brown were estimated for as-tested scenarios and scenarios incorporating changes to allow sustainable operation. This project was funded under the U.S. Department of Energy National Energy Technology Laboratory project entitled 'Large-Scale Mercury Control Technology Field Testing Program--Phase II'.

Laparoscopic Removal of a Large Ovarian Mass Utilizing Planned Trocar Puncture

Science.gov (United States)

2012-01-01

Background: Large cystic ovarian masses pose technical challenges to the laparoscopic surgeon. Removing large, potentially malignant specimens must be done with care to avoid the leakage of cyst fluid into the abdominal cavity. Case: We present the case of a large ovarian cystic mass treated laparoscopically with intentional trocar puncture of the mass to drain and remove the mass. Discussion: Large cystic ovarian masses can be removed laparoscopically with intentional trocar puncture of the mass to facilitate removal without leakage of cyst fluid. PMID:22906344

Volume reduction of reactor wastes by spray drying

International Nuclear Information System (INIS)

Gay, R.L.; Grantham, L.F.; McKenzie, D.E.

1983-01-01

Three simulated low-level reactor wastes were dried using a spray dryer-baghouse system. The three aqueous feedstocks were sodium sulfate waste characteristic of a BWR, boric acid waste characteristic of a PWR, and a waste mixture of ion exchange resins and filter aid. These slurries were spiked with nonradioactive iron, cobalt, and manganese (representing corrosion products) and nonradioactive cesium and iodine (representing fission products). The throughput for the 2.1-m-diameter spray dryer and baghouse system was 160-180 kg/h, which is comparable to the requirements for a full-scale commercial installation. A free-flowing, dry product was produced in all of the tests. The volume reduction factor ranged from 2.5 to 5.8; the baghouse decontamination factor was typically in the range of 10 3 to 10 4 . Using an overall system decontamination factor of 10 6 , the activity of the off-gas was calculated to be one to two orders of magnitude less than the nuclide release limit of the major active species, Cs-137

Multiservice utility plug for remote fuel reprocessing

International Nuclear Information System (INIS)

Goldmann, L.H. Jr.; Jensen, D.A.

1979-10-01

This paper presents the design of a multiservice utility plug and drive system to be used for reliably engaging and disengaging all utility connections automatically that serve large portable equipment modules. The modules are arranged into a fuel processing production line within the Fuels and Materials Examination Laboratory. The utility plugs allow the modules to be easily replaced, rearranged or removed for maintenance

Japanese utilities' plutonium utilization program

International Nuclear Information System (INIS)

Matsuo, Yuichiro.

1996-01-01

Japan's 10 utility companies are working and will continue to work towards establishing a fully closed nuclear fuel cycle. The key goals of which are: (1) reprocessing spent fuel; (2) recycling recovered uranium and plutonium; and (3) commercializing fast breeder technology by around the year 2030. This course of action by the Japanese electric power industry is in full accordance with Japan's national policy outlined in the government's report ''The Long-Term Program for Research, Development, and Nuclear Energy,'' which was published in June 1994. The Japanese civilian nuclear program is a long-term program that looks into the 21st century and beyond. It is quite true that sustaining the recycling option for energy security and the global environment demands a large investment. For it to be accepted by the public, safety must be the highest priority and will be pursued at a great cost if necessary. In its history, Japan has learned that as technology advances, costs will come down. The Japanese utility industry will continue investment in technology without compromising safety until the recycling option becomes more competitive with other options. This effort will be equally applied to the development of the commercial FBRs. The Japanese utility industry is confident that Japan's stable policy and strong objective to develop competitive and peaceful technology will contribute to the global economy and the environment without increasing the threat of plutonium proliferation

Radiation protection of radioactively contaminated large areas by phytoremediation and subsequent utilization of the contaminated plant residues (PHYTOREST)

International Nuclear Information System (INIS)

Mirgorodsky, Daniel; Ollivier, Delphine; Merten, Dirk; Bergmann, Hans; Buechel, Georg; Willscher, Sabine; Wittig, Juliane; Jablonski, Lukasz; Werner, Peter

2010-01-01

Much progress has been achieved over the past 20 years in remediating sites contaminated by heavy metal. However, very large contaminated areas have presented major problems to this day because of remediation costs. Phytoremediation is a new, emerging, sustainable technique of remediating areas with low heavy-metal contamination. One advantage of phytoremediation is the comparatively low cost of the process, which may make it usable also on large areas with low levels of contamination. Besides extracting and immobilizing metals, respectively, phytoremediation among other things also contributes to improving soil quality in terms of physics, chemistry, and ecology. Consequently, phytoremediation offers a great potential for the future. Research into phytoremediation of an area contaminated by heavy metals and radionuclides is carried out on a site in a former uranium mining district in Eastern Thuringia jointly by the Friedrich Schiller University, Jena, and the Technical University of Dresden in a project funded by the German Federal Ministry for Education and Research. The project serves to promote the introduction of soft, biocompatible methods of long-term remediation and to develop conceptual solutions to the subsequent utilization of contaminated plant residues. Optimizing area management is in the focus of phytoremediation studies. (orig.)

WE-G-204-02: Utility of a Channelized Hotelling Model Observer Over a Large Range of Angiographic Exposure Levels

International Nuclear Information System (INIS)

Fetterly, K; Favazza, C

2015-01-01

Purpose: Mathematical model observers provide a figure of merit that simultaneously considers a test object and the contrast, noise, and spatial resolution properties of an imaging system. The purpose of this work was to investigate the utility of a channelized Hotelling model observer (CHO) to assess system performance over a large range of angiographic exposure conditions. Methods: A 4 mm diameter disk shaped, iodine contrast test object was placed on a 20 cm thick Lucite phantom and 1204 image frames were acquired using fixed x-ray beam quality and for several detector target dose (DTD) values in the range 6 to 240 nGy. The CHO was implemented in the spatial domain utilizing 96 Gabor functions as channels. Detectability index (DI) estimates were calculated using the “resubstitution” and “holdout” methods to train the CHO. Also, DI values calculated using discrete subsets of the data were used to estimate a minimally biased DI as might be expected from an infinitely large dataset. The relationship between DI, independently measured CNR, and changes in results expected assuming a quantum limited detector were assessed over the DTD range. Results: CNR measurements demonstrated that the angiography system is not quantum limited due to relatively increasing contamination from electronic noise that reduces CNR for low DTD. Direct comparison of DI versus CNR indicates that the CHO relatively overestimates DI for low DTD and/or underestimates DI values for high DTD. The relative magnitude of the apparent bias error in the DI values was ∼20% over the 40x DTD range investigated. Conclusion: For the angiography system investigated, the CHO can provide a minimally biased figure of merit if implemented over a restricted exposure range. However, bias leads to overestimates of DI for low exposures. This work emphasizes the need to verify CHO model performance during real-world application

WE-G-204-02: Utility of a Channelized Hotelling Model Observer Over a Large Range of Angiographic Exposure Levels

Energy Technology Data Exchange (ETDEWEB)

Fetterly, K; Favazza, C [Mayo Clinic, Rochester, MN (United States)

2015-06-15

Purpose: Mathematical model observers provide a figure of merit that simultaneously considers a test object and the contrast, noise, and spatial resolution properties of an imaging system. The purpose of this work was to investigate the utility of a channelized Hotelling model observer (CHO) to assess system performance over a large range of angiographic exposure conditions. Methods: A 4 mm diameter disk shaped, iodine contrast test object was placed on a 20 cm thick Lucite phantom and 1204 image frames were acquired using fixed x-ray beam quality and for several detector target dose (DTD) values in the range 6 to 240 nGy. The CHO was implemented in the spatial domain utilizing 96 Gabor functions as channels. Detectability index (DI) estimates were calculated using the “resubstitution” and “holdout” methods to train the CHO. Also, DI values calculated using discrete subsets of the data were used to estimate a minimally biased DI as might be expected from an infinitely large dataset. The relationship between DI, independently measured CNR, and changes in results expected assuming a quantum limited detector were assessed over the DTD range. Results: CNR measurements demonstrated that the angiography system is not quantum limited due to relatively increasing contamination from electronic noise that reduces CNR for low DTD. Direct comparison of DI versus CNR indicates that the CHO relatively overestimates DI for low DTD and/or underestimates DI values for high DTD. The relative magnitude of the apparent bias error in the DI values was ∼20% over the 40x DTD range investigated. Conclusion: For the angiography system investigated, the CHO can provide a minimally biased figure of merit if implemented over a restricted exposure range. However, bias leads to overestimates of DI for low exposures. This work emphasizes the need to verify CHO model performance during real-world application.

Utilization Management in the Blood Transfusion Service

Science.gov (United States)

Peña, Jeremy Ryan Andrew; Dzik, Walter “Sunny”

2015-01-01

The scope of activity of the Blood Transfusion Service (BTS) makes it unique among the clinical laboratories. The combination of therapeutic and diagnostic roles necessitates a multi-faceted approach to utilization management in the BTS. We present our experience in utilization management in large academic medical center. PMID:24080431

Accelerator science and its civil and utility engineering work

International Nuclear Information System (INIS)

Yoshioka, Masakazu

2006-01-01

In large-scale accelerator projects such as TRISTAN and J-PARC, approximately half of the total project costs are spent on the civil and utility engineering work for the accelerator. In addition, the quality of civil and utility engineering has a large effect on the quality of the beam. With increasing scale of projects, there is growing specialization of the people in charge of the accelerator on the one hand, and the people in charge of civil and utility engineering on the other. Mutual understanding between the people in charge is therefore important in such cases. From the experience I have accumulated working on the facilities of many large projects, I have become keenly aware of the necessity for both accelerator-literate civil engineering specialists and civil engineering-literate accelerator researchers. A straight-forward method for satisfying this requirement is to systematize accelerator science as a science with civil and utility engineering for accelerators recognized as its sub-field. When new projects launched, the methodology of the natural sciences should be incorporated whereby past experience is fully utilized and then new technologies and knowledge are accumulated. (author)

UTILIZING TYPE Ia SUPERNOVAE IN A LARGE, FAST, IMAGING SURVEY TO CONSTRAIN DARK ENERGY

International Nuclear Information System (INIS)

Zentner, Andrew R.; Bhattacharya, Suman

2009-01-01

We study the utility of a large sample of Type Ia supernovae (SNe Ia) that might be observed in an imaging survey that rapidly scans a large fraction of the sky for constraining dark energy. We consider both the information contained in the traditional luminosity distance test as well as the spread in Ia SN fluxes at fixed redshift induced by gravitational lensing. As would be required from an imaging survey, we include a treatment of photometric redshift uncertainties in our analysis. Our primary result is that the information contained in the mean distance moduli of SNe Ia and the dispersion of SN Ia distance moduli complement each other, breaking a degeneracy between the present dark energy equation of state and its time variation without the need for a high-redshift (z ∼> 0.8) SN sample. Including lensing information also allows for some internal calibration of photometric redshifts. To address photometric redshift uncertainties, we present dark energy constraints as a function of the size of an external set of spectroscopically observed SNe that may be used for redshift calibration, N spec . Depending upon the details of potentially available, external SN data sets, we find that an imaging survey can constrain the dark energy equation of state at the epoch where it is best constrained w p , with a 1σ error of σ(w p ) ∼ 0.03-0.09. In addition, the marginal improvement in the error σ(w p ) from an increase in the spectroscopic calibration sample drops once N spec ∼ a few x 10 3 . This result is important because it is of the order of the size of calibration samples likely to be compiled in the coming decade and because, for samples of this size, the spectroscopic and imaging surveys individually place comparable constraints on the dark energy equation of state. In all cases, it is best to calibrate photometric redshifts with a set of spectroscopically observed SNe with relatively more objects at high redshift (z ∼> 0.5) than the parent sample of

Evaluation of activated carbon for control of mercury from coal-fired boilers

International Nuclear Information System (INIS)

Miller, S.; Laudal, D.; Dunham, G.

1995-01-01

The ability to remove mercury from power plant flue gas may become important because of the Clean Air Act amendments' requirement that the U.S. Environmental Protection Agency (EPA) assess the health risks associated with these emissions. One approach for mercury removal, which may be relatively simple to retrofit, is the injection of sorbents, such as activated carbon, upstream of existing particulate control devices. Activated carbon has been reported to capture mercury when injected into flue gas upstream of a spray dryer baghouse system applied to waste incinerators or coal-fired boilers. However, the mercury capture ability of activated carbon injected upstream of an electrostatic precipitator (ESP) or baghouse operated at temperatures between 200 degrees and 400 degrees F is not well known. A study sponsored by the U.S. Department of Energy and the Electric power Research Institute is being conducted at the University of North Dakota Energy ampersand Environmental Research Center (EERC) to evaluate whether mercury control with sorbents can be a cost-effective approach for large power plants. Initial results from the study were reported last year. This paper presents some of the recent project results. Variables of interest include coal type, sorbent type, sorbent addition rate, collection media, and temperature

Evaluation of activated carbon for control of mercury from coal-fired boilers

Energy Technology Data Exchange (ETDEWEB)

Miller, S.; Laudal, D.; Dunham, G. [Univ. of North Dakota, Grand Forks, ND (United States)

1995-11-01

The ability to remove mercury from power plant flue gas may become important because of the Clean Air Act amendments` requirement that the U.S. Environmental Protection Agency (EPA) assess the health risks associated with these emissions. One approach for mercury removal, which may be relatively simple to retrofit, is the injection of sorbents, such as activated carbon, upstream of existing particulate control devices. Activated carbon has been reported to capture mercury when injected into flue gas upstream of a spray dryer baghouse system applied to waste incinerators or coal-fired boilers. However, the mercury capture ability of activated carbon injected upstream of an electrostatic precipitator (ESP) or baghouse operated at temperatures between 200{degrees} and 400{degrees}F is not well known. A study sponsored by the U.S. Department of Energy and the Electric power Research Institute is being conducted at the University of North Dakota Energy & Environmental Research Center (EERC) to evaluate whether mercury control with sorbents can be a cost-effective approach for large power plants. Initial results from the study were reported last year. This paper presents some of the recent project results. Variables of interest include coal type, sorbent type, sorbent addition rate, collection media, and temperature.

Large-scale grid management

International Nuclear Information System (INIS)

Langdal, Bjoern Inge; Eggen, Arnt Ove

2003-01-01

The network companies in the Norwegian electricity industry now have to establish a large-scale network management, a concept essentially characterized by (1) broader focus (Broad Band, Multi Utility,...) and (2) bigger units with large networks and more customers. Research done by SINTEF Energy Research shows so far that the approaches within large-scale network management may be structured according to three main challenges: centralization, decentralization and out sourcing. The article is part of a planned series

Are American utilities sorry they went nuclear

International Nuclear Information System (INIS)

Dallaire, E.E.

1981-01-01

The future of nuclear power in the U.S. will be determined in large measure by what the electric utilities decide to do. Very few electric utilities are planning to build more nuclear power plants. Most utilities feel the 12 to 14 years it takes to build a nuclear plant is simply too long, especially when construction money must be borrowed at record interest rates. Also, there are too many uncertainties regarding what an acceptable plant design is. On the other hand, these utilities also strongly believe that the U.S. needs nuclear power and that it would be imprudent for a utility to put all its energy eggs in one basket, coal

Practical constraints on fuel management a utility perspective

International Nuclear Information System (INIS)

Grier, C.A.

1986-01-01

The practical and potential constraints of performing fuel management at a large utility are reviewed. Based on approximately six years of experience in performing fuel management the constraints due to commercial, technical, utility system, design methods, and personnel and computer resources are discussed in detail

Business model innovation for sustainable energy: German utilities and renewable energy

International Nuclear Information System (INIS)

Richter, Mario

2013-01-01

The electric power sector stands at the beginning of a fundamental transformation process towards a more sustainable production based on renewable energies. Consequently, electric utilities as incumbent actors face a massive challenge to find new ways of creating, delivering, and capturing value from renewable energy technologies. This study investigates utilities' business models for renewable energies by analyzing two generic business models based on a series of in-depth interviews with German utility managers. It is found that utilities have developed viable business models for large-scale utility-side renewable energy generation. At the same time, utilities lack adequate business models to commercialize small-scale customer-side renewable energy technologies. By combining the business model concept with innovation and organization theory practical recommendations for utility mangers and policy makers are derived. - Highlights: • The energy transition creates a fundamental business model challenge for utilities. • German utilities succeed in large-scale and fail in small-scale renewable generation. • Experiences from other industries are available to inform utility managers. • Business model innovation capabilities will be crucial to master the energy transition

Exploitation and Utilization of Oilfield Geothermal Resources in China

Directory of Open Access Journals (Sweden)

Shejiao Wang

2016-09-01

Full Text Available Geothermal energy is a clean, green renewable resource, which can be utilized for power generation, heating, cooling, and could effectively replace oil, gas, and coal. In recent years, oil companies have put more efforts into exploiting and utilizing geothermal energy with advanced technologies for heat-tracing oil gathering and transportation, central heating, etc., which has not only reduced resource waste, but also improved large-scale and industrial resource utilization levels, and has achieved remarkable economic and social benefits. Based on the analysis of oilfield geothermal energy development status, resource potential, and exploitation and utilization modes, the advantages and disadvantages of harnessing oilfield geothermal resource have been discussed. Oilfield geothermal energy exploitation and utilization have advantages in resources, technical personnel, technology, and a large number of abandoned wells that could be reconstructed and utilized. Due to the high heat demand in oilfields, geothermal energy exploitation and utilization can effectively replace oil, gas, coal, and other fossil fuels, and has bright prospects. The key factors limiting oilfield geothermal energy exploitation and utilization are also pointed out in this paper, including immature technologies, lack of overall planning, lack of standards in resource assessment, and economic assessment, lack of incentive policies, etc.

Impacts of cement industries on environment and control measure

International Nuclear Information System (INIS)

Hashmi, H.N.; Malik, H.N.; Naushad, Z.

2005-01-01

Utilization of cement as building material is gaining more importance. Cement industries around the world are contributing in global and as well as local pollution. In Pakistan most of the cement industries are constructed in remote areas without any proper environmental impact assessment. Unawareness of peoples toward sustainable environment and due to lack of job opportunities, dwellers are demanding employment rather than clean environment from title-holder of the industry. Air pollution caused by cement industries is harmful to the human's health, spoils and erodes building surface, corrodes metals, weakens textiles, deteriorates atmospheric visibility, affects plant life and leads to ecological imbalances. To investigate environmental impact of cement industries in Pakistan, environmental conditions around and inside the five cement industries in the vicinity of Taxila city are studied. To inspect the whole scenario, air pollution control devices in these industries were also examined in detail. These industries are using Electrostatic Precipitators and Baghouses to control air pollution (dust particulates). Proper caring of these equipment is necessary for better results. Detailed study shows that emissions from their stacks and dust particulates are causing problems. Health consultants in study area are much worry about the health of workers and environmental degradation in the vicinity of these industries. The comparison of air pollution control devices shows that Baghouses are environmental friendly. Considering the field conditions it is also concluded that involvement of government and environmental pollution control agencies is much more necessary. (author)

Utility-free heuristic models of two-option choice can mimic predictions of utility-stage models under many conditions

Science.gov (United States)

Piantadosi, Steven T.; Hayden, Benjamin Y.

2015-01-01

Economists often model choices as if decision-makers assign each option a scalar value variable, known as utility, and then select the option with the highest utility. It remains unclear whether as-if utility models describe real mental and neural steps in choice. Although choices alone cannot prove the existence of a utility stage, utility transformations are often taken to provide the most parsimonious or psychologically plausible explanation for choice data. Here, we show that it is possible to mathematically transform a large set of common utility-stage two-option choice models (specifically ones in which dimensions are can be decomposed into additive functions) into a heuristic model (specifically, a dimensional prioritization heuristic) that has no utility computation stage. We then show that under a range of plausible assumptions, both classes of model predict similar neural responses. These results highlight the difficulties in using neuroeconomic data to infer the existence of a value stage in choice. PMID:25914613

Utility-free heuristic models of two-option choice can mimic predictions of utility-stage models under many conditions

Directory of Open Access Journals (Sweden)

Steven T Piantadosi

2015-04-01

Full Text Available Economists often model choices as if decision-makers assign each option a scalar value variable, known as utility, and then select the option with the highest utility. It remains unclear whether as-if utility models describe real mental and neural steps in choice. Although choices alone cannot prove the existence of a utility stage in choice, utility transformations are often taken to provide the most parsimonious or psychologically plausible explanation for choice data. Here, we show that it is possible to mathematically transform a large set of common utility-stage two-option choice models (specifically ones in which dimensions are linearly separable into a psychologically plausible heuristic model (specifically, a dimensional prioritization heuristic that has no utility computation stage. We then show that under a range of plausible assumptions, both classes of model predict similar neural responses. These results highlight the difficulties in using neuroeconomic data to infer the existence of a value stage in choice.

Developing engineering analysis capabilities at a nuclear utility

International Nuclear Information System (INIS)

Miller, J.S.

1992-01-01

When a nuclear plant is originally designed and constructed, a large staff of analytical and design personnel is used by the architectural and engineering (A/E) firm(s) and the nuclear steam supply system (NSSS) engineering firm(s) to provide the technical specifications needed for the plant to function and satisfy US Nuclear Regulatory Commission (NRC) requirements. During this design process, thousands of calculations are performed, some using large sophisticated computer programs. Once the plant is operational, the utility assumes the large responsibility for plant design. Utility personnel must understand the fundamentals of operating the plant, the technical information in the updated safety analysis report, all calculations used to design the plant, and the input for all design specification documents. Without this knowledge, utility personnel cannot successfully perform modifications or new analyses required by the NRC, such as probabilistic risk assessment (PRA) and motor-operated valve programs, and maintain the safe and reliable operation of the plant. Therefore, it is very important to have on-site personnel who understand how the calculations are performed and used in the design basis. This paper discusses the organization of the engineering analysis group, which provides technical support for River Bend Station (RBS) of Gulf States Utilities

Beyond Widgets -- Systems Incentive Programs for Utilities

Energy Technology Data Exchange (ETDEWEB)

Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mathew, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walter, Travis [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-08-15

Utility incentive programs remain one of the most significant means of deploying commercialized, but underutilized building technologies to scale. However, these programs have been largely limited to component-based products (e.g., lamps, RTUs). While some utilities do provide ‘custom’ incentive programs with whole building and system level technical assistance, these programs require deeper levels of analysis, resulting in higher program costs. This results in custom programs being restricted to utilities with greater resources, and are typically applied mainly to large or energy-intensive facilities, leaving much of the market without cost effective access and incentives for these solutions. In addition, with increasingly stringent energy codes, cost effective component-based solutions that achieve significant savings are dwindling. Building systems (e.g., integrated façade, HVAC and/or lighting solutions) can deliver higher savings that translate into large sector-wide savings if deployed at the scale of these programs. However, systems application poses a number of challenges – baseline energy use must be defined and measured; the metrics for energy and performance must be defined and tested against; in addition, system savings must be validated under well understood conditions. This paper presents a sample of findings of a project to develop validated utility incentive program packages for three specific integrated building systems, in collaboration with Xcel Energy (CO, MN), ComEd, and a consortium of California Public Owned Utilities (CA POUs) (Northern California Power Agency(NCPA) and the Southern California Public Power Authority(SCPPA)). Furthermore, these program packages consist of system specifications, system performance, M&V protocols, streamlined assessment methods, market assessment and implementation guidance.

JV Task 107- Pilot-Scale Emission Control Technology Testing for Constellation Energy

Energy Technology Data Exchange (ETDEWEB)

Michael Jones; Brandon Pavlish; Stephen Sollom; John Kay

2007-06-30

An Indonesian, Colombian, and Russian coal were tested in the Energy & Environmental Research Center's combustion test facility for their performance and an evaluation of mercury release and capture with selected additives in both electrostatic precipitator and baghouse configurations. Sorbents included the carbon-based materials NORIT DARCO Hg, Sorbent Technologies B-PAC and B-PAC LC, STI Rejects provided by Constellation Energy, and Envergex e-Sorb, along with ChemMod's high-temperature additive. Each coal was evaluated over several days and compared. Ash-fouling tests were conducted, and mercury levels were monitored using continuous mercury monitors (CMMs). The Ontario Hydro mercury sampling method was also utilized. The Indonesian coal had the lowest ash content, lowest sulfur content, and lowest energy content of the three coals tested. The Colombian coal had the highest mercury content and did contain a significant level of selenium which can interfere with the ability of a CMM to monitor mercury in the gas stream. All sorbents displayed very favorable results. In most cases, mercury removal greater than 86% could be obtained. The Indonesian coal displayed the best mercury removal with sorbent addition. A maximum removal of 97% was measured with this coal using Envergex's carbon-based sorbent at a rate of 4 lb/Macf across an electrostatic precipitator. The high ash and selenium content of the Colombian coal caused it to be a problematic fuel, and ash plugging of the test furnace was a real concern. Problems with the baghouse module led to limited testing. Results indicated that native capture across the baghouse for each coal type was significant enough not to warrant sorbent addition necessary. The fouling potential was the lowest for the Indonesian coal. Low sulfur content contributes to the poor potential for fouling, as witnessed by the lack of deposits during testing. The Russian and Colombian coals had a much higher potential for fouling

Utility customer issues

International Nuclear Information System (INIS)

Downey, W.H.

1997-01-01

Customer issues affected by the restructuring of the $250 billion US electric power industry were discussed. In the past the industry's vertically integrated utilities conducted their business in protected geographic markets. With deregulation and greater competition, that industry structure will change. This presentation highlighted the strategies that Unicom is using to react to the restructuring of the electric power industry. The underlying principle is for the utility to reinvent itself to change its market orientation and focus on customer services, such as reliability, responsiveness, custom tailored solutions, and guaranteed savings over time. Attempting to become total energy providers and delivering integrated solutions to meet the needs of large industrial and commercial consumers, intensive market research, improved service and installation, and sophisticated customer retention initiatives will also have to be high on the agenda

Utilization technology on slurried ash

Energy Technology Data Exchange (ETDEWEB)

Kanbe, Yoshio; Yasuda, Minoru; Furuki, Yasuhiko [The Coal Mining Research Centre, Japan, Tokyo, Japan; Electric Power Development Co., Ltd., Tokyo (Japan))

1987-08-01

Three research results of the utilization technology on slurried ash were reported. As for the utilization as the fly ash quick setting (FQS) backfill grout for tail void in shield works of tunneling, grout blending was simplified, the blended solution of cement, clay, additives and water was stabilized, and a favorable workability and long term durability were obtained. As for the utilization as the material of a SMW (soil mixing wall) method for continuous walls in long shaft digging, a fly ash-gypsum-cement (FGC) stabilizer showed an excellent workability and remarkably high water-tightness as compared with conventional cement bentonite. As for the utilization as the material of an injection method of overlay mats in foundation works of light weight structures on the sea bed mud foundation, since a FGC concrete weight in water was remarkably light as 0.7t/m{sup 3}, no both large mold form strength and vibration compacting were required. 10 figs., 8 tabs.

Large-scale matrix-handling subroutines 'ATLAS'

International Nuclear Information System (INIS)

Tsunematsu, Toshihide; Takeda, Tatsuoki; Fujita, Keiichi; Matsuura, Toshihiko; Tahara, Nobuo

1978-03-01

Subroutine package ''ATLAS'' has been developed for handling large-scale matrices. The package is composed of four kinds of subroutines, i.e., basic arithmetic routines, routines for solving linear simultaneous equations and for solving general eigenvalue problems and utility routines. The subroutines are useful in large scale plasma-fluid simulations. (auth.)

Exploitation and Utilization of Oilfield Geothermal Resources in China

OpenAIRE

Shejiao Wang; Jiahong Yan; Feng Li; Junwen Hu; Kewen Li

2016-01-01

Geothermal energy is a clean, green renewable resource, which can be utilized for power generation, heating, cooling, and could effectively replace oil, gas, and coal. In recent years, oil companies have put more efforts into exploiting and utilizing geothermal energy with advanced technologies for heat-tracing oil gathering and transportation, central heating, etc., which has not only reduced resource waste, but also improved large-scale and industrial resource utilization levels, and has ac...

Modular-multiplex or single large power plants-advantages and disadvantages for utility systems

International Nuclear Information System (INIS)

Endicott, R.D.

1986-01-01

The question of growing interest in the fusion community is what size and type configuration fusion reactor(s) will lead to the most economical and attractive fusion power plant? There are two sides to this question. One involves how to build the most economical and attractive fusion reactor. This question which requires evaluation of reactor components within the reactor system is being examined at the Fusion Engineering Design Center (FEDC) and elsewhere. The other side involves examining the issues associated with the most economical size and configuration reactor to use. This question requires the evaluation of the changes in cost of service due to different size and configuration reactors on a utility system. The authors objective was to explore the advantages and disadvantages of using modular-multiplex power plants and to illustrate a means of quantifying the tradeoffs. The effort resulted in the identification of the key parameters involved in selecting the optimum size plant for a utility system and a better understanding of the tradeoffs that are possible. This paper discusses this effort in detail

Prospects and strategy for large scale utility applications of photovoltaic power systems

International Nuclear Information System (INIS)

Vigotti, R.; Lysen, E.; Cole, A.

1996-01-01

The status and prospects of photovoltaic (PV) power systems are reviewed. The market diffusion strategy for the application of PV systems by utilities is described, and the mission, objectives and thoughts of the collaboration programme launched among 18 industrialized countries under the framework of the International Energy Agency are highly with particular reference to technology transfer to developing countries. Future sales of PV systems are expected to grow in the short and medium term mainly in the sector of isolated systems. (R.P.)

Lewis Research Center studies of multiple large wind turbine generators on a utility network

Science.gov (United States)

Gilbert, L. J.; Triezenberg, D. M.

1979-01-01

A NASA-Lewis program to study the anticipated performance of a wind turbine generator farm on an electric utility network is surveyed. The paper describes the approach of the Lewis Wind Energy Project Office to developing analysis capabilities in the area of wind turbine generator-utility network computer simulations. Attention is given to areas such as, the Lewis Purdue hybrid simulation, an independent stability study, DOE multiunit plant study, and the WEST simulator. Also covered are the Lewis mod-2 simulation including analog simulation of a two wind turbine system and comparison with Boeing simulation results, and gust response of a two machine model. Finally future work to be done is noted and it is concluded that the study shows little interaction between the generators and between the generators and the bus.

Charting the Emergence of Corporate Procurement of Utility-Scale PV

Energy Technology Data Exchange (ETDEWEB)

Heeter, Jenny S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-07

Corporations and other institutions have contracted for more than 2300 MW of off-site solar, using power purchase agreements, green tariffs, or bilateral deals with utilities. This paper examines the benefits, challenges, and outlooks for large-scale off-site solar purchasing in the United States. Pathways differ based on where they are available, the hedge value they can provide, and their ease of implementation. The paper features case studies of an aggregate PPA (Massachusetts Institute of Technology, Boston Medical Center, and Post Office Square), a corporation exiting their incumbent utility (MGM Resorts), a utility offering large scale renewables to corporate customers (Alabama Powers Renewable Procurement Program), and a company with approval to sell energy into wholesale markets (Google Energy Inc.).

Cleveland, Toledo utilities merge to aid N-projects

International Nuclear Information System (INIS)

Utroska, D.

1985-01-01

A decision by the Cleveland Electric Illuminating Co. and Toledo Edison to merge was spurred by the need to strengthen their access to capital markets in order to complete several nuclear power plants now under construction and to possibly mitigate the impact of large rate increases on Ohio ratepayers. The two utilities will continue as local companies. If they obtain approval from the Securities and Exchange, the Ohio Public Utilities, and the Nuclear Regulatory Commissions for the $8 million affiliation, the new holding company will be among the 20 largest electric utilities in terms of the market value of its common stock. Some industry observers see this as a harbinger of more utility mergers. 1 figure

Forecasting distribution of numbers of large fires

Science.gov (United States)

Haiganoush K. Preisler; Jeff Eidenshink; Stephen Howard; Robert E. Burgan

2015-01-01

Systems to estimate forest fire potential commonly utilize one or more indexes that relate to expected fire behavior; however they indicate neither the chance that a large fire will occur, nor the expected number of large fires. That is, they do not quantify the probabilistic nature of fire danger. In this work we use large fire occurrence information from the...

Supplier-independent fuel management from the viewpoint of a large German utility - Objectives and experience

International Nuclear Information System (INIS)

Kallmeyer, D.H.; Petersen, K.

1986-01-01

Internationally, many nuclear power operating utilities tend to have alternative fuel supplies and as a consequence also have to build up a supplier-independent fuel management. The main reasons are competition within the fuel assembly market as a price-regulating mechanism; quality comparison and corresponding improvements in fuel technology, documentation system and licensing support activities; improved necessity on the part of the manufacturer to be open for innovations; improved supply reliability by redundant manufacturer qualification; and gain of know-how for the utility by collection and comparison of the state of the art of the different suppliers in the important technical and physical disciplines

Domestic utility attitudes toward foreign uranium supply

International Nuclear Information System (INIS)

1981-06-01

The current embargo on the enrichment of foreign-origin uranium for use in domestic utilization facilities is scheduled to be removed in 1984. The pending removal of this embargo, complicated by a depressed worldwide market for uranium, has prompted consideration of a new or extended embargo within the US Government. As part of its on-going data collection activities, Nuclear Resources International (NRI) has surveyed 50 domestic utility/utility holding companies (representing 60 lead operator-utilities) on their foreign uranium purchase strategies and intentions. The most recent survey was conducted in early May 1981. A number of qualitative observations were made during the course of the survey. The major observations are: domestic utility views toward foreign uranium purchase are dynamic; all but three utilities had some considered foreign purchase strategy; some utilities have problems with buying foreign uranium from particular countries; an inducement is often required by some utilities to buy foreign uranium; opinions varied among utilities concerning the viability of the domestic uranium industry; and many utilities could have foreign uranium fed through their domestic uranium contracts (indirect purchases). The above observations are expanded in the final section of the report. However, it should be noted that two of the observations are particularly important and should be seriously considered in formulation of foreign uranium import restrictions. These important observations are the dynamic nature of the subject matter and the potentially large and imbalanced effect the indirect purchases could have on utility foreign uranium procurement

Favorable Cardiovascular Health Is Associated With Lower Health Care Expenditures and Resource Utilization in a Large US Employee Population: The Baptist Health South Florida Employee Study.

Science.gov (United States)

Osondu, Chukwuemeka U; Aneni, Ehimen C; Valero-Elizondo, Javier; Salami, Joseph A; Rouseff, Maribeth; Das, Sankalp; Guzman, Henry; Younus, Adnan; Ogunmoroti, Oluseye; Feldman, Theodore; Agatston, Arthur S; Veledar, Emir; Katzen, Barry; Calitz, Chris; Sanchez, Eduardo; Lloyd-Jones, Donald M; Nasir, Khurram

2017-03-13

To examine the association of favorable cardiovascular health (CVH) status with 1-year health care expenditures and resource utilization in a large health care employee population. Employees of Baptist Health South Florida participated in a health risk assessment from January 1 through September 30, 2014. Information on dietary patterns, physical activity, blood pressure, blood glucose level, total cholesterol level, and smoking were collected. Participants were categorized into CVH profiles using the American Heart Association's ideal CVH construct as optimal (6-7 metrics), moderate (3-5 metrics), and low (0-2 metrics). Two-part econometric models were used to analyze health care expenditures. Of 9097 participants (mean ± SD age, 42.7±12.1 years), 1054 (11.6%) had optimal, 6945 (76.3%) had moderate, and 1098 (12.1%) had low CVH profiles. The mean annual health care expenditures among those with a low CVH profile was $10,104 (95% CI, $8633-$11,576) compared with $5824 (95% CI, $5485-$6164) and $4282 (95% CI, $3639-$4926) in employees with moderate and optimal CVH profiles, respectively. In adjusted analyses, persons with optimal and moderate CVH had a $2021 (95% CI, -$3241 to -$801) and $940 (95% CI, -$1560 to $80) lower mean expenditure, respectively, than those with low CVH. This trend remained even after adjusting for demographic characteristics and comorbid conditions as well as across all demographic subgroups. Similarly, health care resource utilization was significantly lower in those with optimal CVH profiles compared with those with moderate or low CVH profiles. Favorable CVH profile is associated with significantly lower total medical expenditures and health care utilization in a large, young, ethnically diverse, and fully insured employee population. Copyright © 2017 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

Large-scale grid management; Storskala Nettforvaltning

Energy Technology Data Exchange (ETDEWEB)

Langdal, Bjoern Inge; Eggen, Arnt Ove

2003-07-01

The network companies in the Norwegian electricity industry now have to establish a large-scale network management, a concept essentially characterized by (1) broader focus (Broad Band, Multi Utility,...) and (2) bigger units with large networks and more customers. Research done by SINTEF Energy Research shows so far that the approaches within large-scale network management may be structured according to three main challenges: centralization, decentralization and out sourcing. The article is part of a planned series.

Utilization of saline water and land: Reclaiming lost resources

International Nuclear Information System (INIS)

Naqvi, Mujtaba

2001-01-01

There is an abundance of saline water on the globe. Large tracts of land are arid and/or salt-affected, and a large number of plant species are known to be salt-tolerant. It would seem obvious that salt tolerant plants (halophytes) have a role in utilizing the two wasted resources, saline water and wastelands. We will briefly describe how these resources can be fruitfully utilized and how the IAEA has helped several countries to demonstrate the possibility of cultivating salt tolerant plant species on arid saline wastelands for economic and environmental benefit. After some brief introductory remarks we will discuss the results of the project

Maximize Minimum Utility Function of Fractional Cloud Computing System Based on Search Algorithm Utilizing the Mittag-Leffler Sum

Directory of Open Access Journals (Sweden)

Rabha W. Ibrahim

2018-01-01

Full Text Available The maximum min utility function (MMUF problem is an important representative of a large class of cloud computing systems (CCS. Having numerous applications in practice, especially in economy and industry. This paper introduces an effective solution-based search (SBS algorithm for solving the problem MMUF. First, we suggest a new formula of the utility function in term of the capacity of the cloud. We formulate the capacity in CCS, by using a fractional diffeo-integral equation. This equation usually describes the flow of CCS. The new formula of the utility function is modified recent active utility functions. The suggested technique first creates a high-quality initial solution by eliminating the less promising components, and then develops the quality of the achieved solution by the summation search solution (SSS. This method is considered by the Mittag-Leffler sum as hash functions to determine the position of the agent. Experimental results commonly utilized in the literature demonstrate that the proposed algorithm competes approvingly with the state-of-the-art algorithms both in terms of solution quality and computational efficiency.

Nurses' ethical conflicts in performance of utilization reviews.

Science.gov (United States)

Bell, Sue Ellen

2003-09-01

This article describes the ethical conflicts that a sample of US nurse utilization reviewers faced in their work, and also each nurse's self-reported ethical orientation that was used to resolve the dilemmas. Data were collected from a sample of 97 registered nurses who were working at least 20 hours per week as utilization reviewers. Respondents were recruited from three managed care organizations that conduct utilization reviews in a large midwestern city. A cross-sectional survey design was used to collect demographic data and to ask closed-response, short-answer and open-ended questions. Ethical conflicts reported by nurses were similar across utilization review settings and many were justice orientated. Self-reported ethical orientations were similar across organizations, with beneficence dominating. Implications of these findings are discussed.

Maximizing Light Utilization Efficiency and Hydrogen Production in Microalgal Cultures

Energy Technology Data Exchange (ETDEWEB)

Melis, Anastasios [Univ. of California, Berkeley, CA (United States)

2014-12-31

The project addressed the following technical barrier from the Biological Hydrogen Production section of the Fuel Cell Technologies Program Multi-Year Research, Development and Demonstration Plan: Low Sunlight Utilization Efficiency in Photobiological Hydrogen Production is due to a Large Photosystem Chlorophyll Antenna Size in Photosynthetic Microorganisms (Barrier AN: Light Utilization Efficiency).

The Health Utilities Index (HUI®: concepts, measurement properties and applications

Directory of Open Access Journals (Sweden)

Horsman John

2003-10-01

Full Text Available Abstract This is a review of the Health Utilities Index (HUI® multi-attribute health-status classification systems, and single- and multi-attribute utility scoring systems. HUI refers to both HUI Mark 2 (HUI2 and HUI Mark 3 (HUI3 instruments. The classification systems provide compact but comprehensive frameworks within which to describe health status. The multi-attribute utility functions provide all the information required to calculate single-summary scores of health-related quality of life (HRQL for each health state defined by the classification systems. The use of HUI in clinical studies for a wide variety of conditions in a large number of countries is illustrated. HUI provides comprehensive, reliable, responsive and valid measures of health status and HRQL for subjects in clinical studies. Utility scores of overall HRQL for patients are also used in cost-utility and cost-effectiveness analyses. Population norm data are available from numerous large general population surveys. The widespread use of HUI facilitates the interpretation of results and permits comparisons of disease and treatment outcomes, and comparisons of long-term sequelae at the local, national and international levels.

Multiattribute utility theory without expected utility foundations

NARCIS (Netherlands)

Wakker, P.P.; Miyamoto, J.

1996-01-01

Methods for determining the form of utilities are needed for the implementation of utility theory in specific decisions. An important step forward was achieved when utility theorists characterized useful parametric families of utilities, and simplifying decompositions of multiattribute utilities.

Multiattribute Utility Theory without Expected Utility Foundations

NARCIS (Netherlands)

Stiggelbout, A.M.; Wakker, P.P.

1995-01-01

Methods for determining the form of utilities are needed for the implementation of utility theory in specific decisions. An important step forward was achieved when utility theorists characterized useful parametric families of utilities, and simplifying decompositions of multiattribute utilities.

Expected utility without utility

OpenAIRE

Castagnoli, E.; Licalzi, M.

1996-01-01

This paper advances an interpretation of Von Neumann–Morgenstern’s expected utility model for preferences over lotteries which does not require the notion of a cardinal utility over prizes and can be phrased entirely in the language of probability. According to it, the expected utility of a lottery can be read as the probability that this lottery outperforms another given independent lottery. The implications of this interpretation for some topics and models in decision theory are considered....

Development of industrial utilization of metallic sodium

International Nuclear Information System (INIS)

Yuhara, Shunichi

1995-01-01

Sodium exists in large quantity, being ranked to 6th in the existence proportion of elements, and takes 2.83% of the matters composing earth crust. Sodium is an alkali metal which is light weight, chemically very active and a strong reducing substance. It is excellent in the compatibility with iron and steel materials, and it possesses good heat conduction and flow characteristics and stable nuclear characteristics. Since the industrial production of sodium became practical, its utilization was developed as the reducing agent and catalyst in chemical industry, the core coolant and heat transport medium for nuclear reactors, the material composing the secondary batteries for storing electric power, and the auxiliaries for metal refining and so on. The industrial production of metallic sodium is carried out by the electrolysis of melted salt, namely Downs process. The production of metallic sodium in Japan is 3000-6000 t yearly, and its import is 300-350 t. Its main use is for organic chemical industry including dye production. The grades of metallic sodium products and their uses are shown. The utilization of sodium for large fast reactors, the utilization of NaK as the heat transport and cooling medium for space use nuclear reactors and deep sea fast reactor system, and the utilization of sodium as the catalyst in dye production, for silicon carbide fiber production and for agricultural and medical chemical production are reported. (K.I.)

The Clean Coal Technology Program 100 MWe demonstration of gas suspension absorption for flue gas desulfurization

Energy Technology Data Exchange (ETDEWEB)

Hsu, F.E.; Hedenhag, J.G. [AirPol Inc., Teterboro, NJ (United States); Marchant, S.K.; Pukanic, G.W. [Dept. of Energy, Pittsburgh, PA (United States). Pittsburgh Energy Technology Center; Norwood, V.M.; Burnett, T.A. [Tennessee Valley Authority, Chattanooga, TN (United States)

1997-12-31

AirPol Inc., with the cooperation of the Tennessee Valley Authority (TVA) under a Cooperative Agreement with the United States Department of Energy, installed and tested a 10 MWe Gas Suspension Absorption (GSA) Demonstration system at TVA`s Shawnee Fossil Plant near Paducah, Kentucky. This low-cost retrofit project demonstrated that the GSA system can remove more than 90% of the sulfur dioxide from high-sulfur coal-fired flue gas, while achieving a relatively high utilization of reagent lime. This paper presents a detailed technical description of the Clean Coal Technology demonstration project. Test results and data analysis from the preliminary testing, factorial tests, air toxics texts, 28-day continuous demonstration run of GSA/electrostatic precipitator (ESP), and 14-day continuous demonstration run of GSA/pulse jet baghouse (PJBH) are also discussed within this paper.

Disaster and primary health care utilization: a 4 year follow-up.

NARCIS (Netherlands)

Dorn, T.; Yzermans, J.; Kerssens, J.; Veen, P. ten

2005-01-01

Background: Although crucial for the management of the post-disaster phase, the impact of disasters on primary health care utilization is largely unknown. Often, pre-disaster base-line data is lacking. The current study quantified primary health care utilization after a major fire disaster in The

Breaking into the utility market

International Nuclear Information System (INIS)

Argue, D.; Rubinoff, M.

1992-01-01

The wind energy industry in Canada must displace competition from government protected conventional energy industries if it is to gain a market position. This hypothesis is discussed for the case of Ontario, where the provincial utility has historically focused on nuclear, large hydro, and coal-fired sources. It is alleged that the utility has consistently underestimated costs for conventional energy sources and overestimated those for renewable sources such as wind power. Research by a coalition of environmental groups is cited to show that avoided generation costs in Ontario range from 8 cents/kWh for off-peak periods to a high of 12 cents/kWh during peak periods. At these values, even the utility's high cost estimates of $1,890-$2,600/kW for wind turbines and wind farms indicates cost effectiveness. Estimates of the added costs of conventional energy developments (the costs of environmental impacts not taken into account in conventional utility accounting) range from 1.1 cents/kWh for gas combined cycle cogeneration to 4.4 cents/kWh for existing coal-fired plants. By taking this kind of information to public hearings on energy developments, the wind energy industry can help establish new standards for evaluating conventional energy technology

High SO{sub 2} removal duct injection: A low-cost FGD alternative

Energy Technology Data Exchange (ETDEWEB)

Nelson, S.G. [Sorbent Technologies Corp., Twinsburg, OH (United States)

1995-12-01

Sorbent Technologies Corporation, of the United States, is currently developing and demonstrating a new waste free, retrofitable, high-SO{sub 2} removal duct-injection process. Up to 85 percent SO{sub 2} removal is achieved by simply injecting a new dry lime-based sorbent into the flue-gas duct, collecting the sorbent downstream in a particulate collector, and then recycling the sorbent. By avoiding large, expensive components, the process can have low capital costs, making it especially appropriate for smaller, older, less-utilized plants. The key to the new technology is the use of sorbent supports. Supported sorbents are produced by coating hydrated lime onto inexpensive mineral supports, such as exfoliated vermiculite or perlite. Consequently, there are no liquid, sludge, or solid wastes with the new technology. Once saturated with SO{sub 2}, the spent sorbent can be easily pelletized into a valuable soil-conditioning agricultural by-product, for the sustainable development that the future requires. This paper describes Sorbent Technologies` pilot demonstration of supported sorbent injection at the Ohio Edison Company`s R.E. Burger station. The Burger effort is also the first demonstration of the Electric Power Research Institute`s new {open_quotes}COHPAC{close_quotes} baghouse technology in a sorbent-injection desulfurization application.

Choice of large projects

Energy Technology Data Exchange (ETDEWEB)

Harris, R

1978-08-01

Conventional cost/benefit or project analysis has generally not taken into account circumstances in which the project under consideration is large enough that its introduction to the economy would have significant general equilibrium effects. In this paper, rules are examined that would indicate whether such large projects should be accepted or rejected. The rules utilize information yielded by before-project and after-project equilibrium prices and production data. Rules are developed for the undistorted ''first-best'' case, the case in which the fixed costs of the project are covered by distortionary taxation, and for the case of projects producing public goods. 34 references.

How 'healthy' are healthcare organizations? Exploring employee healthcare utilization rates among Dutch healthcare organizations.

Science.gov (United States)

Bronkhorst, Babette

2017-08-01

Occupational health and safety research rarely makes use of data on employee healthcare utilization to gain insight into the physical and mental health of healthcare staff. This paper aims to fill this gap by examining the prevalence of two relevant types of healthcare utilization among staff working in healthcare organizations: physical therapy and mental healthcare utilization. The paper furthermore explores what role employee and organizational characteristics play in explaining differences in healthcare utilization between organizations. A Dutch healthcare insurance company provided healthcare utilization records for a sample of 417 organizations employing 136,804 healthcare workers in the Netherlands. The results showed that there are large differences between and within healthcare industries when it comes to employee healthcare utilization. Multivariate regression analyses revealed that employee characteristics such as age and gender distributions, and healthcare industry, explain some of the variance between healthcare organizations. Nevertheless, the results of the analyses showed that for all healthcare utilization indicators there is still a large amount of unexplained variance. Further research into the subject of organizational differences in employee healthcare utilization is needed, as finding possibilities to influence employee health and subsequent healthcare utilization is beneficial to employees, employers and society as a whole.

Multiattribute Utility Theory without Expected Utility Foundations

NARCIS (Netherlands)

J. Miyamoto (John); P.P. Wakker (Peter)

1996-01-01

textabstractMethods for determining the form of utilities are needed for the implementation of utility theory in specific decisions. An important step forward was achieved when utility theorists characterized useful parametric families of utilities and simplifying decompositions of multiattribute

Nuclear snow job: utilities struggle to avoid credibility meltdown

International Nuclear Information System (INIS)

Feeney, A.

1979-01-01

Electric utilities and the US nuclear industry are criticized for giving a public relations response to safety concerns following the accident at Three Mile Island and for passing the cost of the response on to utility customers. The large amounts of money budgeted by Babcock and Wilcox, Bechtel Power Corporation, the Atomic Industrial Forum, Electric Power Research Institute, Nuclear Energy Women, and others to minimize the incident and counter anti-nuclear arguments with media events are seen here by Feeney as evidence that the utilities and nuclear industry are afraid of political consequences as their technical credibility vanishes

Utility requirements for advanced LWR passive plants

International Nuclear Information System (INIS)

Yedidia, J.M.; Sugnet, W.R.

1992-01-01

LWR Passive Plants are becoming an increasingly attractive and prominent option for future electric generating capacity for U.S. utilities. Conceptual designs for ALWR Passive Plants are currently being developed by U.S. suppliers. EPRI-sponsored work beginning in 1985 developed preliminary conceptual designs for a passive BWR and PWR. DOE-sponsored work from 1986 to the present in conjunction with further EPRI-sponsored studies has continued this development to the point of mature conceptual designs. The success to date in developing the ALWR Passive Plant concepts has substantially increased utility interest. The EPRI ALWR Program has responded by augmenting its initial scope to develop a Utility Requirements Document for ALWR Passive Plants. These requirements will be largely based on the ALWR Utility Requirements Document for Evolutionary Plants, but with significant changes in areas related to the passive safety functions and system configurations. This work was begun in late 1988, and the thirteen-chapter Passive Plant Utility Requirements Document will be completed in 1990. This paper discusses the progress to date in developing the Passive Plant requirements, reviews the top-level requirements, and discusses key issues related to adaptation of the utility requirements to passive safety functions and system configurations. (orig.)

Modeling Resource Utilization of a Large Data Acquisition System

CERN Document Server

AUTHOR|(SzGeCERN)756497; The ATLAS collaboration; Garcia Garcia, Pedro Javier; Vandelli, Wainer; Froening, Holger

2017-01-01

The ATLAS 'Phase-II' upgrade, scheduled to start in 2024, will significantly change the requirements under which the data-acquisition system operates. The input data rate, currently fixed around 150 GB/s, is anticipated to reach 5 TB/s. In order to deal with the challenging conditions, and exploit the capabilities of newer technologies, a number of architectural changes are under consideration. Of particular interest is a new component, known as the Storage Handler, which will provide a large buffer area decoupling real-time data taking from event filtering. Dynamic operational models of the upgraded system can be used to identify the required resources and to select optimal techniques. In order to achieve a robust and dependable model, the current data-acquisition architecture has been used as a test case. This makes it possible to verify and calibrate the model against real operation data. Such a model can then be evolved toward the future ATLAS Phase-II architecture. In this paper we introduce the current ...

Modelling Resource Utilization of a Large Data Acquisition System

CERN Document Server

Santos, Alejandro; The ATLAS collaboration

2017-01-01

The ATLAS 'Phase-II' upgrade, scheduled to start in 2024, will significantly change the requirements under which the data-acquisition system operates. The input data rate, currently fixed around 150 GB/s, is anticipated to reach 5 TB/s. In order to deal with the challenging conditions, and exploit the capabilities of newer technologies, a number of architectural changes are under consideration. Of particular interest is a new component, known as the Storage Handler, which will provide a large buffer area decoupling real-time data taking from event filtering. Dynamic operational models of the upgraded system can be used to identify the required resources and to select optimal techniques. In order to achieve a robust and dependable model, the current data-acquisition architecture has been used as a test case. This makes it possible to verify and calibrate the model against real operation data. Such a model can then be evolved toward the future ATLAS Phase-II architecture. In this paper we introduce the current ...

Recursive utility in a Markov environment with stochastic growth.

Science.gov (United States)

Hansen, Lars Peter; Scheinkman, José A

2012-07-24

Recursive utility models that feature investor concerns about the intertemporal composition of risk are used extensively in applied research in macroeconomics and asset pricing. These models represent preferences as the solution to a nonlinear forward-looking difference equation with a terminal condition. In this paper we study infinite-horizon specifications of this difference equation in the context of a Markov environment. We establish a connection between the solution to this equation and to an arguably simpler Perron-Frobenius eigenvalue equation of the type that occurs in the study of large deviations for Markov processes. By exploiting this connection, we establish existence and uniqueness results. Moreover, we explore a substantive link between large deviation bounds for tail events for stochastic consumption growth and preferences induced by recursive utility.

Current radioactive waste utilization at PA 'MAYAK'

International Nuclear Information System (INIS)

Merkushkin, A.O.

2001-01-01

The Production Association 'Mayak' is one of the largest production union of Nuclear Fuel Cycle (NFC) in Russia. In 1988 the last military reactor, which worked for making military plutonium was stopped. From this time civic history of 'Mayak' was began. Today 'Mayak' is the complex production union of NFC, which utilizes the Radiated Nuclear Fuel (RNF). The combine is dynamically develops, new technologies are domesticate and intrude, large works for liquidation of accidents and mistakes of lapsed years are in progress. The short review of radioactive waste utilization methods is present in this account. (author)

Current radioactive waste utilization at PA 'MAYAK'

Energy Technology Data Exchange (ETDEWEB)

Merkushkin, A O [Ozyorsk Technological Institute of Moscow Physical Engineering Institute (Russian Federation)

2001-07-01

The Production Association 'Mayak' is one of the largest production union of Nuclear Fuel Cycle (NFC) in Russia. In 1988 the last military reactor, which worked for making military plutonium was stopped. From this time civic history of 'Mayak' was began. Today 'Mayak' is the complex production union of NFC, which utilizes the Radiated Nuclear Fuel (RNF). The combine is dynamically develops, new technologies are domesticate and intrude, large works for liquidation of accidents and mistakes of lapsed years are in progress. The short review of radioactive waste utilization methods is present in this account. (author)

Clean energy utilization technology

International Nuclear Information System (INIS)

Honma, Takuya

1992-01-01

The technical development of clean energy including the utilization of solar energy was begun in 1973 at the time of the oil crisis, and about 20 years elapsed. Also in Japan, the electric power buying system by electric power companies for solar light electric power and wind electric power has been started in 1992, namely their value as a merchandise was recognized. As for these two technologies, the works of making the international standards and JIS were begun. The range of clean energy or natural energy is wide, and its kinds are many. The utilization of solar heat and the electric power generation utilizing waves, tide and geotherm already reached the stage of practical use. Generally in order to practically use new energy, the problem of price must be solved, but the price is largely dependent on the degree of spread. Also the reliability, durability and safety must be ensured, and the easiness of use, effectiveness and trouble-saving maintenance and operation are required. For the purpose, it is important to packaging those skillfully in a system. The cases of intelligent natural energy systems are shown. Solar light and wind electric power generation systems and the technology of transporting clean energy are described. (K.I.)

The EU's Major Electricity and Gas Utilities since Market Liberalization

International Nuclear Information System (INIS)

Schulke, Ch.

2010-01-01

A major change has taken place in the company structure of the European electricity and gas markets. Twenty years ago, national or regional monopolies dominated the markets and there was strictly no competition between utilities. But since the liberalization of EU energy markets began in the 1990's, companies like E.ON, GDF Suez, EDF, Enel, and RWE have become European giants with activities in a large number of Member States. The advocates of market liberalization did not expect, or even intend, the emergence of a small number of large utilities that control an increasing part of the EU market. Some observers already claim that liberalization has led to an oligopoly with detrimental consequences for competition. Based on extensive background research, this book presents a fact-based analysis of the changes in the European utility sector since the 1990's. Case studies of the seven largest utilities illustrate how companies adapted their strategies to the changing market environment. The author underlines diverging choices and common trends like geographic expansion into new markets via mergers and acquisitions or diversification of business activities with the aim of using synergies between electricity and gas. (author)

Utility involvement in uranium exploration and development - a growing trend

International Nuclear Information System (INIS)

Sullivan, R.P.; Riedel, D.W.

1980-01-01

Nuclear power commitments by United States utilities at the beginning of 1979 represent 137,000 MW(e) of capacity from 147 nuclear units scheduled for operation by 1985 plus an additional 52,000 MW(e) from 48 units scheduled beyond 1985. Including the minority owners there are over 100 independent electric utilities in the United States of America with some financial commitment to these 195 nuclear power plants. United States uranium requirements to the year 2000 have been projected at 35 to 40% of the world requirements (exclusive of centrally planned economies). Also United States uranium resources represent a substantial fraction of present estimated world resources. Thus, decisions by US electric utilities regarding their financial involvement in uranium exploration and development can be expected to have a large impact on the development of the world-wide uranium industry. Unlike the situation in most countries with large commitments to nuclear power, the US government is not directly involved financially in uranium exploration and development except in a supportive role to the industry as a whole. Investment decisions by US utilities and US mining companies are based on their individual perceptions of the risks and benefits to be gained. Public attitudes towards nuclear power and public regulatory commission treatment of utility expenditures for resource development vary throughout the country. Thus, US utilities have shown a wide range of responses in formulating their uranium procurement strategies. About half the utilities with nuclear commitments are at present involved financially in uranium exploration and development. This paper traces the development of this trend and elaborates on the types of financial involvement and the factors that affect a utility's selection of its overall uranium procurement strategy

Potential for increased wind-generated electricity utilization using heat pumps in urban areas

International Nuclear Information System (INIS)

Waite, Michael; Modi, Vijay

2014-01-01

Highlights: • Large-scale wind power and increased electric heat pumps were evaluated. • A deterministic model of wind power and electricity demand was developed. • Sub-models for space heating and domestic hot water demand were developed. • Increased use of heat pumps can improve the viability of large-scale wind power. • Larger wind power capacity can meet a target utilization rate with more heat pumps. - Abstract: The U.S. has substantial wind power potential, but given wind’s intermittent availability and misalignment with electricity demand profiles, large-scale deployment of wind turbines could result in high electricity costs due to energy storage requirements or low utilization rates. While fuel switching and heat pumps have been proposed as greenhouse gas (GHG) emissions and energy reduction strategies at the building scale, this paper shows that heat pump adoption could have additional system-wide benefits by increasing the utilization of wind-generated electricity. A model was developed to evaluate the effects of coupling large-scale wind power installations in New York State with increased use of electric heat pumps to meet a portion of space heating and domestic hot water (DHW) demands in New York City. The analysis showed significant increases in wind-generated electricity utilization with increased use of heat pumps, allowing for higher installed capacity of wind power. One scenario indicates that 78.5% annual wind-generated electricity utilization can be achieved with 3 GW of installed wind power capacity generated electricity equal to 20% of existing NYC annual electricity demand; if 20% of space heating and DHW demands are provided by heat pumps, the 78.5% utilization rate can be achieved with an increase of total wind power capacity to 5 GW. Therefore, this integrated supply–demand approach could provide additional system-wide emissions reductions

DOE/NASA Lewis large-wind-turbine program

Energy Technology Data Exchange (ETDEWEB)

Thomas, R.L.

1982-01-01

There are several ongoing large wind system development project; ots directed toward meeting the technology requirements for utility applications. First generation tehcnology machines (Mod-0A and Mod-1) and second generation machines (Mod-2) are in opoeration at selected utility sites. Third generation technology machines (Mod-5) are in the design phase and are scheduled for initial operation in 1984 if project funding is continued. An overview of the large wind turbine activities managed by NASA Lewis is provided. These activities include results from the first and second generation field machines (Mod-0A, 01, and -2), the status of the Department of Interior WTS-4 machine for which NASA is responsible for technical management, and the design phase of the third generation wind turbines (Mod-5).

Neutron diagnostics on TFTR utilizing the Campbelling technique

International Nuclear Information System (INIS)

England, A.C.; Hendel, H.W.; Neischmidt, E.B.

1986-01-01

The authors report modified commercial neutron counting equipment installed on a tokamak fusion test reactor (TFTR) which utilizes the Campbelling theorem to monitor the neutron source strength at very high neutron count rates. Campbelling utilizes the large amplitude fluctuation from neutron events in the detectors to discriminate against small amplitude noise events. Source strengths yielding equivalent count rates a factor of five higher than possible in the conventional count rate mode have been obtained to date. The concept of Campbelling is discussed and the particular application to TFTR is illustrated

Designing a model for selection of air pollution control equipment using fuzzy logic

Directory of Open Access Journals (Sweden)

F. Golbabaei

2014-07-01

Conclusion: Finally, the proposed model that is based on the Fuzzy Analytic Hierarchy Process indicates that the Baghouse Technique is the most appropriate technique for the purpose of dust filtration in major sources of air pollution spread in Shargh Cement Company.

Financial statistics of major U.S. investor-owned electric utilities 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The Financial Statistics of Major US Investor-Owned Electric Utilities publication presents summary and detailed financial accounting data on the investor-owned electric utilities. The objective of the publication is to provide Federal and State governments, industry, and the general public with current and historical data that can be used for making policy and decisions relating to investor-owned electric utility issues. The US electric power industry is a combination of electric utilities (investor-owned, publicly owned, Federal, and cooperatives) and nonutility power producers. Investor-owned electric utilities account for over three-fourths of electric sales and revenue. Historically, the investor-owned electric utilities have served the large consolidated markets. There is substantial diversity among the investor-owned electric utilities in terms of services, size, fuel usage, and prices charged. Most investor-owned electric utilities generate, transmit, and distribute electric power. Investor-owned electric utilities operate in all States except Nebraska; Hawaii is the only State in which all electricity is supplied by investor-owned electric utilities. 5 figs., 57 tabs.

Large-area photogrammetry based testing of wind turbine blades

Science.gov (United States)

Poozesh, Peyman; Baqersad, Javad; Niezrecki, Christopher; Avitabile, Peter; Harvey, Eric; Yarala, Rahul

2017-03-01

An optically based sensing system that can measure the displacement and strain over essentially the entire area of a utility-scale blade leads to a measurement system that can significantly reduce the time and cost associated with traditional instrumentation. This paper evaluates the performance of conventional three dimensional digital image correlation (3D DIC) and three dimensional point tracking (3DPT) approaches over the surface of wind turbine blades and proposes a multi-camera measurement system using dynamic spatial data stitching. The potential advantages for the proposed approach include: (1) full-field measurement distributed over a very large area, (2) the elimination of time-consuming wiring and expensive sensors, and (3) the need for large-channel data acquisition systems. There are several challenges associated with extending the capability of a standard 3D DIC system to measure entire surface of utility scale blades to extract distributed strain, deflection, and modal parameters. This paper only tries to address some of the difficulties including: (1) assessing the accuracy of the 3D DIC system to measure full-field distributed strain and displacement over the large area, (2) understanding the geometrical constraints associated with a wind turbine testing facility (e.g. lighting, working distance, and speckle pattern size), (3) evaluating the performance of the dynamic stitching method to combine two different fields of view by extracting modal parameters from aligned point clouds, and (4) determining the feasibility of employing an output-only system identification to estimate modal parameters of a utility scale wind turbine blade from optically measured data. Within the current work, the results of an optical measurement (one stereo-vision system) performed on a large area over a 50-m utility-scale blade subjected to quasi-static and cyclic loading are presented. The blade certification and testing is typically performed using International

Radioactive waste incinerator at the Scientific Ecology Group, Inc

International Nuclear Information System (INIS)

Dalton, J.D.; Arrowsmith, H.W.

1990-01-01

Scientific Ecology Group, Inc. (SEG) is the largest radioactive waste processor in the United States. This paper discusses how SEG recently began operation of the first commercial low-level radioactive waste incinerator in the United States. This incinerator is an Envikraft EK 980 NC multi-stage, partial pyrolysis, controlled-air unit equipped with an off-gas train that includes a boiler, baghouse, HEPA bank, and wet scrubber. The incinerator facility has been integrated into a large waste management complex with several other processing systems. The incinerator is operated on a continuous around-the-clock basis, processing up to 725 kg/hr (1,600 lbs/hr) of solid waste while achieving volume reduction ratios in excess of 300:1

The EU's major electricity and gas utilities since market liberalization

International Nuclear Information System (INIS)

Schuelke, Christian

2011-06-01

A major change has taken place in the company structure of the European electricity and gas markets. Twenty years ago, national or regional monopolies dominated the markets and there was strictly no competition between utilities. But since the liberalization of EU energy markets began in the 1990's, companies like E.ON, GDF Suez, EDF, Enel, and RWE have become European giants with activities in a large number of Member States. The advocates of market liberalization did not expect, or even intend, the emergence of a small number of large utilities that control an increasing part of the EU market. Some observers already claim that liberalization has led to an oligopoly with detrimental consequences for competition. Based on extensive background research, this book presents a fact-based analysis of the changes in the European utility sector since the 1990's. Case studies of the seven largest utilities illustrate how companies adapted their strategies to the changing market environment. The author underlines diverging choices and common trends like geographic expansion into new markets via mergers and acquisitions or diversification of business activities with the aim of using synergies between electricity and gas. Contents: Executive Summary. Introduction. Seven Case Studies of Changing Strategies of Major European Energy Utilities since Market Liberalization (E.ON, GDF Suez, EDF, Enel, RWE, Iberdrola, Vattenfall, Other European Utilities). Overview of Major National and Regional Electricity and Gas Market in the EU (Germany, France, United Kingdom, Italy, Spain, Nordic, Belgium and the Netherlands, Central and Eastern Europe). Conclusions. Annex. Bibliography

Are US utility standby rates inhibiting diffusion of customer-owned generating systems?

International Nuclear Information System (INIS)

Jackson, Jerry

2007-01-01

New, small-scale electric generation technologies permit utility customers to generate some of their own electric power and to utilize waste heat for space heating and other applications at the building site. This combined heat and power (CHP) characteristic can provide significant energy-cost savings. However, most current US utility regulations leave CHP standby rate specification largely to utility discretion resulting in claims by CHP advocates that excessive standby rates are significantly reducing CHP-related savings and inhibiting CHP diffusion. The impacts of standby rates on the adoption of CHP are difficult to determine; however, because of the characteristically slow nature of new technology diffusion. This study develops an agent-based microsimulation model of CHP technology choice using cellular automata to represent new technology information dispersion and knowledge acquisition. Applying the model as an n-factorial experiment quantifies the impacts of standby rates on CHP technologies under alternative diffusion paths. Analysis of a sample utility indicates that, regardless of the likely diffusion process, reducing standby rates to reflect the cost of serving a large number of small, spatially clustered CHP systems significantly increases the adoption of these technologies

The effect of Employee Assistance Programs use on healthcare utilization.

OpenAIRE

Zarkin, G A; Bray, J W; Qi, J

2000-01-01

OBJECTIVE: To estimate the effect of Employee Assistance Program (EAP) use on healthcare utilization as measured by health claims. DATA SOURCES: A unique data set that combines individual-level information on EAP utilization, demographic information, and health insurance claims from 1991 to 1995 for all employees of a large midwestern employer. STUDY DESIGN: Using "fixed-effect" econometric models that control for unobserved differences between individuals' propensities to use healthcare reso...

Utilization of prostate brachytherapy for low risk prostate cancer: Is the decline overstated?

OpenAIRE

Joseph Safdieh; Andrew Wong; Joseph P. Weiner; David Schwartz; David Schreiber

2016-01-01

Purpose : Several prior studies have suggested that brachytherapy utilization has markedly decreased, coinciding with the recent increased utilization of intensity modulated radiation therapy, as well as an increase in urologist-owned centers. We sought to investigate the brachytherapy utilization in a large, hospital-based registry. Material and methods: Men with prostate cancer diagnosed between 2004-2012 and treated with either external beam radiation and/or prostate brachytherapy ...

Long-term fish monitoring in large rivers: Utility of “benchmarking” across basins

Science.gov (United States)

Ward, David L.; Casper, Andrew F.; Counihan, Timothy D.; Bayer, Jennifer M.; Waite, Ian R.; Kosovich, John J.; Chapman, Colin; Irwin, Elise R.; Sauer, Jennifer S.; Ickes, Brian; McKerrow, Alexa

2017-01-01

In business, benchmarking is a widely used practice of comparing your own business processes to those of other comparable companies and incorporating identified best practices to improve performance. Biologists and resource managers designing and conducting monitoring programs for fish in large river systems tend to focus on single river basins or segments of large rivers, missing opportunities to learn from those conducting fish monitoring in other rivers. We briefly examine five long-term fish monitoring programs in large rivers in the United States (Colorado, Columbia, Mississippi, Illinois, and Tallapoosa rivers) and identify opportunities for learning across programs by detailing best monitoring practices and why these practices were chosen. Although monitoring objectives, methods, and program maturity differ between each river system, examples from these five case studies illustrate the important role that long-term monitoring programs play in interpreting temporal and spatial shifts in fish populations for both established objectives and newly emerging questions. We suggest that deliberate efforts to develop a broader collaborative network through benchmarking will facilitate sharing of ideas and development of more effective monitoring programs.

Pareto utility

NARCIS (Netherlands)

Ikefuji, M.; Laeven, R.J.A.; Magnus, J.R.; Muris, C.H.M.

2013-01-01

In searching for an appropriate utility function in the expected utility framework, we formulate four properties that we want the utility function to satisfy. We conduct a search for such a function, and we identify Pareto utility as a function satisfying all four desired properties. Pareto utility

Water utilization in the Snake River Basin

Science.gov (United States)

Hoyt, William Glenn; Stabler, Herman

1935-01-01

The purpose of this report is to describe the present utilization of the water in the Snake River Basin with special reference to irrigation and power and to present essential facts concerning possible future utilization. No detailed plan of development is suggested. An attempt has been made, however, to discuss features that should be taken into account in the formulation of a definite plan of development. On account of the size of the area involved, which is practically as large as the New England States and New York combined, and the magnitude of present development and future possibilities, considerable details have of necessity been omitted. The records of stream flow in the basin are contained in the reports on surface water supply published annually by the Geological Survey. These records are of the greatest value in connection with the present and future regulation and utilization of the basin's largest asset water.

Report on results of utilizing nuclear reactor, April, 1983 - March, 1984

International Nuclear Information System (INIS)

1984-01-01

The reactor in the Institute for Atomic Energy, Rikkyo University, is usually operated for 6 hours a day. It has been operated for 21 years without large trouble. The time of operation in fiscal year 1983 was 551 hours, and the cumulative power output was 47,511 kWh. From December, 1983, to March, 1984, the reactor was shut down, and the repair works for the secondary cooling system were carried out, accordingly, the power output and the number of utilization cases decreased. The total number of utilization cases in fiscal year 1983 was 2,702, and the total time of utilization was 8,497 hr 26 min. The utilization by universities accounted for 53.8%. A short period course was held as usual to educate and train 14 students. The radiation control for individuals and controlled areas is reported. The management of solid, gas end liquid wastes and their amounts being preserved in the Institute are reported. The radioactivity in environmental samples was measured 4 times in a year by total beta method, and the data on soil, sea bottom sediment, seawater and marine products are given. The summary of the research made by the personnel of the Institute and other achievement are also described. The execution of research in 1983 owed largely to the scientific research promotion fund of Japan Private School Promotion Foundation. The reactor was effectively utilized by the common utilization of the Rikkyo reactor. (Kako, I.)

40 CFR 49.24 - Federal Implementation Plan Provisions for Navajo Generating Station, Navajo Nation.

Science.gov (United States)

2010-07-01

... crusher, any conveyor belt transfer point, any pneumatic material transferring, any baghouse or other..., grinding mill, screening operation, belt conveyor, truck loading or unloading operation, or railcar..., and the owner or operator uses best efforts regarding planning, design, and operating procedures to...

Tabular cross section file generation and utilization techniques

International Nuclear Information System (INIS)

Cullen, D.E.; Ozer, O.; Weisbin, C.R.

1975-03-01

Criteria of importance to the generation of linear cross section tabulations are presented. Algorithms for reducing or thinning such tables within a desired accuracy criterion and the implementation of paging techniques for efficient utilization of large data tables are reviewed. (1 figure, 3 tables) (U.S.)

Beneficial utilization of nuclear waste products

International Nuclear Information System (INIS)

Dix, G.P.

1975-01-01

A sufficient supply of isotopes exists to conduct demonstrational experiments in the 1975-1980 time frame to stimulate a market for waste products. A large potential market exists for a number of waste products, measured in terms of billions of dollars. Actinide by-products can become a feed stock for producing other energy producing isotopes by neutron irradiation whose value may exceed that of the fission products. Commercial reprocessors will not invest in the extraction and separation of isotopes from the waste stream until a proven market has evolved. Economic studies must be performed to establish the trade-offs between the beneficial use or disposal of wastes. Fundamental to these studies are process economics, safety analyses applications studies, and market analyses, both domestic and foreign. Regardless of the degree of beneficial utilization of wastes, some residual material from wastes not utilized and spent by-products after utilization will have to undergo ultimate disposal. Isotopic waste products have the potential for solving a number of societal and national security problems and represent a unique source of energy and materials

Climate change, phenology, and butterfly host plant utilization.

Science.gov (United States)

Navarro-Cano, Jose A; Karlsson, Bengt; Posledovich, Diana; Toftegaard, Tenna; Wiklund, Christer; Ehrlén, Johan; Gotthard, Karl

2015-01-01

Knowledge of how species interactions are influenced by climate warming is paramount to understand current biodiversity changes. We review phenological changes of Swedish butterflies during the latest decades and explore potential climate effects on butterfly-host plant interactions using the Orange tip butterfly Anthocharis cardamines and its host plants as a model system. This butterfly has advanced its appearance dates substantially, and its mean flight date shows a positive correlation with latitude. We show that there is a large latitudinal variation in host use and that butterfly populations select plant individuals based on their flowering phenology. We conclude that A. cardamines is a phenological specialist but a host species generalist. This implies that thermal plasticity for spring development influences host utilization of the butterfly through effects on the phenological matching with its host plants. However, the host utilization strategy of A. cardamines appears to render it resilient to relatively large variation in climate.

Safety assessment of envisaged systems for automotive hydrogen supply and utilization

Energy Technology Data Exchange (ETDEWEB)

Landucci, Gabriele [Dipartimento di Ingegneria Chimica, Chimica Industriale e Scienza dei Materiali, Universita di Pisa, via Diotisalvi n.2, 56126 Pisa (Italy); Tugnoli, Alessandro; Cozzani, Valerio [Dipartimento di Ingegneria Chimica, Mineraria e delle Tecnologie Ambientali, Alma Mater Studiorum - Universita di Bologna, via Terracini n.28, 40131 Bologna (Italy)

2010-02-15

A novel consequence-based approach was applied to the inherent safety assessment of the envisaged hydrogen production, distribution and utilization systems, in the perspective of the widespread hydrogen utilization as a vehicle fuel. Alternative scenarios were assessed for the hydrogen system chain from large scale production to final utilization. Hydrogen transportation and delivery was included in the analysis. The inherent safety fingerprint of each system was quantified by a set of Key Performance Indicators (KPIs). Rules for KPIs aggregation were considered for the overall assessment of the system chains. The final utilization stage resulted by large the more important for the overall expected safety performance of the system. Thus, comparison was carried out with technologies proposed for the use of other low emission fuels, as LPG and natural gas. The hazards of compressed hydrogen-fueled vehicles resulted comparable, while reference innovative hydrogen technologies evidenced a potentially higher safety performance. Thus, switching to the inherently safer technologies currently under development may play an important role in the safety enhancement of hydrogen vehicles, resulting in a relevant improvement of the overall safety performance of the entire hydrogen system. (author)

The longevity of large pine snags in eastern Texas

Science.gov (United States)

Richard N. Conner; Daniel Saenz

2005-01-01

Habitat for cavity-nesting wildlife is closely tied to the availability of standing dead trees (snags). Large snags (>40 cm dbh) are particularly important because they provide cavity- excavation substrate for both large and small cavity excavators. Historically in the southern United States, common belief has been that the utility of pine (Pinus...

Quantification and Classification of E. coli Proteome Utilization and Unused Protein Costs across Environments

DEFF Research Database (Denmark)

O'Brien, Edward J.; Utrilla, Jose; Palsson, Bernhard

2016-01-01

The costs and benefits of protein expression are balanced through evolution. Expression of un-utilized protein (that have no benefits in the current environment) incurs a quantifiable fitness costs on cellular growth rates; however, the magnitude and variability of un-utilized protein expression...... in varying environments. Thus, unused protein expression is the source of large and pervasive fitness costs that may provide the benefit of hedging against environmental change....... in natural settings is unknown, largely due to the challenge in determining environment-specific proteome utilization. We address this challenge using absolute and global proteomics data combined with a recently developed genome-scale model of Escherichia coli that computes the environment-specific cost...

Large-scale STI services in Avahan improve utilization and treatment seeking behaviour amongst high-risk groups in India: an analysis of clinical records from six states

Directory of Open Access Journals (Sweden)

Gurung Anup

2011-12-01

Full Text Available Abstract Background Avahan, the India AIDS Initiative, implemented a large HIV prevention programme across six high HIV prevalence states amongst high risk groups consisting of female sex workers, high risk men who have sex with men, transgenders and injecting drug users in India. Utilization of the clinical services, health seeking behaviour and trends in syndromic diagnosis of sexually transmitted infections amongst these populations were measured using the individual tracking data. Methods The Avahan clinical monitoring system included individual tracking data pertaining to clinical services amongst high risk groups. All clinic visits were recorded in the routine clinical monitoring system using unique identification numbers at the NGO-level. Visits by individual clinic attendees were tracked from January 2005 to December 2009. An analysis examining the limited variables over time, stratified by risk group, was performed. Results A total of 431,434 individuals including 331,533 female sex workers, 10,280 injecting drug users, 82,293 men who have sex with men, and 7,328 transgenders visited the clinics with a total of 2,700,192 visits. Individuals made an average of 6.2 visits to the clinics during the study period. The number of visits per person increased annually from 1.2 in 2005 to 8.3 in 2009. The proportion of attendees visiting clinics more than four times a year increased from 4% in 2005 to 26% in 2009 (p Conclusions The programme demonstrated that acceptable and accessible services with marginalised and often difficult–to-reach populations can be brought to a very large scale using standardized approaches. Utilization of these services can dramatically improve health seeking behaviour and reduce STI prevalence.

Optimization of hybrid power system composed of SMES and flywheel MG for large pulsed load

International Nuclear Information System (INIS)

Niiyama, K.; Yagai, T.; Tsuda, M.; Hamajima, T.

2008-01-01

A superconducting magnetic storage system (SMES) has some advantages such as rapid large power response and high storage efficiency which are superior to other energy storage systems. A flywheel motor generator (FWMG) has large scaled capacity and high reliability, and hence is broadly utilized for a large pulsed load, while it has comparatively low storage efficiency due to high mechanical loss compared with SMES. A fusion power plant such as International Thermo-Nuclear Experimental Reactor (ITER) requires a large and long pulsed load which causes a frequency deviation in a utility power system. In order to keep the frequency within an allowable deviation, we propose a hybrid power system for the pulsed load, which equips the SMES and the FWMG with the utility power system. We evaluate installation cost and frequency control performance of three power systems combined with energy storage devices; (i) SMES with the utility power, (ii) FWMG with the utility power, (iii) both SMES and FWMG with the utility power. The first power system has excellent frequency power control performance but its installation cost is high. The second system has inferior frequency control performance but its installation cost is the lowest. The third system has good frequency control performance and its installation cost is attained lower than the first power system by adjusting the ratio between SMES and FWMG

U. S. Utility Leadership in Requirements For Passive Reactors

International Nuclear Information System (INIS)

Kim, Jcng H.; Layman, William H.

1991-01-01

Utility leadership from both U.S. utilities and international utilities, is a key element in the U. S. Advanced Light Water Reactor Program. International utilities have played a very import Design reviews by the utilities participating in the ALRR Program will ensure that all of the utility requirements are met while design work is being carried out. Our mission is to achieve NRC certification of designs that reflect the needs of the utilities and we believe that this will play an important role in the resurgence of nuclear plant construction in the United States. As stated in the Nuclear Power Oversight Committee's Strategic Plan For Building New Nuclear Power Plants : 'The extensive operating experience with today's light water reactors (LWRs), and the promise shown in recent technical developments, leads the industry to the conclusion that the next nuclear plants ordered in the United States will be advanced light water reactors (A LWRs). Two types are under development : units of large output (1300 MW) called 'evolutionary' A LWRs and units of mid-size output (600 MW) called 'Passive' A LWRs. The term 'passive' refers to the safety features which depend more on natural processes such as gravity and buoyancy than on powered equipment such as pumps

Natural gas opportunities, utilization and trades (in a European context)

International Nuclear Information System (INIS)

Corke, M.J.

1996-01-01

The historical development of natural gas consumption in Europe has relied heavily on requirements for space heating energy in the residential/commercial sector and for process energy and feedstock in the industrial sector. This paper reviews historical gas utilization trends and considers how these are likely to develop in the future. In addition to the above somewhat negative factors, the bright outlook for gas utilization in both large scale and small scale power and cogeneration facilities is reviewed and the implications of power industry restructuring for natural gas utilization are discussed. Finally, the outlook for overall European natural gas demand and trade is briefly considered. (author)

Charting the Emergence of Corporate Procurement of Utility-Scale PV

Energy Technology Data Exchange (ETDEWEB)

Heeter, Jenny S. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bird, Lori A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-01

Through July 2017, corporate customers contracted for more than 2,300 MW of utility-scale solar. This paper examines the benefits, challenges, and outlooks for large-scale off-site solar purchasing through four pathways: PPAs, retail choice, utility partnerships (green tariffs and bilateral contracts with utilities), and by becoming a licensed wholesale seller of electricity. Each pathway differs based on where in the United States it is available, the value provided to a corporate off-taker, and the ease of implementation. The paper concludes with a discussion of future pathway comparison, noting that to deploy more corporate off-site solar, new procurement pathways are needed.

Design, engineering and utility of biotic games.

Science.gov (United States)

Riedel-Kruse, Ingmar H; Chung, Alice M; Dura, Burak; Hamilton, Andrea L; Lee, Byung C

2011-01-07

Games are a significant and defining part of human culture, and their utility beyond pure entertainment has been demonstrated with so-called 'serious games'. Biotechnology--despite its recent advancements--has had no impact on gaming yet. Here we propose the concept of 'biotic games', i.e., games that operate on biological processes. Utilizing a variety of biological processes we designed and tested a collection of games: 'Enlightenment', 'Ciliaball', 'PAC-mecium', 'Microbash', 'Biotic Pinball', 'POND PONG', 'PolymerRace', and 'The Prisoner's Smellemma'. We found that biotic games exhibit unique features compared to existing game modalities, such as utilizing biological noise, providing a real-life experience rather than virtual reality, and integrating the chemical senses into play. Analogous to video games, biotic games could have significant conceptual and cost-reducing effects on biotechnology and eventually healthcare; enable volunteers to participate in crowd-sourcing to support medical research; and educate society at large to support personal medical decisions and the public discourse on bio-related issues.

Managing the nuclear utility

International Nuclear Information System (INIS)

Williams, J.W. Jr.

1985-01-01

The Florida Power and Light Company (FP and L) is the fifth largest investor-owned utility in the country. The success of nuclear power generation at the St. Lucie Units 1 and 2 and Turkey Point Units 3 and 4 has resulted from a continuing management commitment to the nuclear program. The management of the power plants rely strongly on teamwork for most large projects and activities whether they entail plant operation, construction, or maintenance. Various examples of how teamwork has been used to realize the successful completion of projects or solutions to problems are given

Energy cascading in large district heating systems

International Nuclear Information System (INIS)

Mayer, F.W.

1978-01-01

District heat transfer is the most economical utilization of the waste heat of power plants. Optimum utilization and heat transfer over large distances are possible because of a new energy distribution system, the ''energy cascading system,'' in which heat is transferred to several consumer regions at different temperature ranges. It is made more profitable by the use of heat pumps. The optimum flow-line temperature is 368 0 K, and the optimum return-line temperature is 288 0 K, resulting in an approximately 50% reduction of electric power loss at the power plant

78 FR 49701 - Approval and Promulgation of Implementation Plans; Connecticut; Control of Visible Emissions...

Science.gov (United States)

2013-08-15

... Harbor 3.... Bridgeport/ Coal/Oil Operating Adaro Adaro Coal, Fairfield. Coal/Residual Oil. Electrostatic precipitator, Activated carbon injection, Pulse jet fabric filter baghouse, Low NOX Burner Technology w... by 52 percent, the maximum allowable NO X emission rate for existing coal-fired boilers was reduced...

75 FR 10174 - Source-Specific Federal Implementation Plan for Navajo Generating Station; Navajo Nation

Science.gov (United States)

2010-03-05

..., any conveyor belt transfer point, any pneumatic material transferring, any baghouse or other control... than 20% from any crusher, grinding mill, screening operation, belt conveyor, truck loading or... emissions from this facility. This will be an ongoing process designed to incorporate suitable VCS as they...

Processing and utilization of metallurgical slag

Directory of Open Access Journals (Sweden)

Alena Pribulová

2016-06-01

Full Text Available Metallurgy and foundry industry create a huge amount of slags that are by-products in production of pig iron, steel and cast iron. Slag is produced in a very large amount in pyrometallurgical processes, and is a huge source of waste if not properly recycled and utilized. With rapid growth of industrialization, land available for land-filling of large quantity of metallurgical slag is being reduced all over the world and disposal cost is becoming increasingly higher. Metallurgical slag from different metallurgical processes treated and utilized in different ways based on different slag characteristics. The most economic and efficient option for reducing metallurgical waste is through recycling, which is a significant contribution to saving natural resources and reducing CO2 emissions. Characteristic of slags as well as its treatment and utilization are given in the paper. Slag from pig iron and steel production is used most frequently in building industry. From experiments using blast furnace slag and granulated blast furnace slag as gravel, and water glass as binder it can be concluded that that the best results – the best values of compression strength and tensile strength were reached by using of 18% of water glass as a solidification activating agent. According to cubic compression strength, mixture from 50% blast furnace gravel, 50% granulated blast furnace slag and 18% water glass falls into C35/45 class of concrete. Such concrete also fulfils strength requirements for road concrete, moreover, it even exceeds them considerably and, therefore, it can find an application in construction of road communications or in production of concrete slabs.

General vibration monitoring: Utility Building, August 1992

International Nuclear Information System (INIS)

Jendrzejczyk, J.A.; Wambsganss, M.W.; Smith, R.K.

1993-01-01

This vibration data was generated from measurements made on 8/12/92. The contents are self explanatory. They are baseline measurements and no exceptionally large vibration amplitude or response was observed. These measurements represent baseline measurements, i.e., measurements with no driving forces active, made on the utility building, a service building for the Advanced Photon Source at Argonne National Laboratory

The rural utility response to Colorado's electricity mandates

International Nuclear Information System (INIS)

Tierney, Sean

2011-01-01

When Colorado voters passed Amendment 37 in 2004, it became the first state to pass a renewable portfolio standard at the ballet box, suggesting broad appeal to harness and pay for renewable energy. While large urban utilities are prepared to make this transition, smaller cities and rural areas, for various financial and scale issues are severely disadvantaged in trying to incorporate more renewable energy sources into their electricity mix. This was evident by the state's support for Amendment 37, which was passed due to strong support in the Denver metro area-representing nearly half of the state's population. Support for the bill was poor in the rest of the state. Nevertheless, in 2007, the state expanded up Amendment 37 by forcing the utilities in rural communities to diversify their electricity mix. This study surveyed the managers at the state's various rural electric cooperatives and municipal utilities in an effort to gage their attitudes concerning: carbon legislation, conservation and efficiency programs, and their plans for making the transition away from fossil fuel generation. - Highlights: → Communities served by rural utilities opposed Colorado's state-wide RPS, but were forced to adhere anyway. → Most rural utilities are very concerned about the economic impacts of trying to diversify their energy portfolios. → Many of these unregulated utilities were already pushing DSM programs to promote conservation and improve efficiency.

Periphytic biofilms: A promising nutrient utilization regulator in wetlands.

Science.gov (United States)

Wu, Yonghong; Liu, Junzhuo; Rene, Eldon R

2018-01-01

Low nutrient utilization efficiency in agricultural ecosystems is the main cause of nonpoint source (NPS) pollution. Therefore, novel approaches should be explored to improve nutrient utilization in these ecosystems. Periphytic biofilms composed of microalgae, bacteria and other microbial organisms are ubiquitous and form a 'third phase' in artificial wetlands such as paddy fields. Periphytic biofilms play critical roles in nutrient transformation between the overlying water and soil/sediment, however, their contributions to nutrient utilization improvement and NPS pollution control have been largely underestimated. This mini review summarizes the contributions of periphytic biofilms to nutrient transformation processes, including assimilating and storing bioavailable nitrogen and phosphorus, fixing nitrogen, and activating occluded phosphorus. Future research should focus on augmenting the nitrogen fixing, phosphate solubilizing and phosphatase producing microorganisms in periphytic biofilms to improve nutrient utilization and thereby reduce NPS pollution production in artificial and natural wetland ecosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Incremental Frequent Subgraph Mining on Large Evolving Graphs

KAUST Repository

Abdelhamid, Ehab

2017-08-22

Frequent subgraph mining is a core graph operation used in many domains, such as graph data management and knowledge exploration, bioinformatics and security. Most existing techniques target static graphs. However, modern applications, such as social networks, utilize large evolving graphs. Mining these graphs using existing techniques is infeasible, due to the high computational cost. In this paper, we propose IncGM+, a fast incremental approach for continuous frequent subgraph mining problem on a single large evolving graph. We adapt the notion of “fringe” to the graph context, that is the set of subgraphs on the border between frequent and infrequent subgraphs. IncGM+ maintains fringe subgraphs and exploits them to prune the search space. To boost the efficiency, we propose an efficient index structure to maintain selected embeddings with minimal memory overhead. These embeddings are utilized to avoid redundant expensive subgraph isomorphism operations. Moreover, the proposed system supports batch updates. Using large real-world graphs, we experimentally verify that IncGM+ outperforms existing methods by up to three orders of magnitude, scales to much larger graphs and consumes less memory.

NASA Office of Small and Disadvantaged Business Utilization

Science.gov (United States)

2001-01-01

The Office of Small and Disadvantaged Business Utilization (OSDBU) within NASA promotes the utilization of small, disadvantaged, and women-owned small businesses in compliance with Federal laws, regulations, and policies. We assist such firms in obtaining contracts and subcontracts with NASA and its prime contractors. The OSDBU also facilitates the participation of small businesses in NASA's technology transfer and commercialization activities. Our driving philosophy is to consider small businesses as our products. Our customers are the NASA Enterprises, Field Centers, Functional Staff Offices, major prime contractors, and other large institutions. We hone the skills of our products to make them marketable to our customers in the performance of NASA missions.

76 FR 2096 - Record of Decision for the Environmental Impact Statement for the Proposed Abengoa Biorefinery...

Science.gov (United States)

2011-01-12

... have fabric filter dust collectors (baghouses). Volatile organic matter released during processing... plant under the Action Alternative would be used to operate a fire-tube boiler to produce steam. A small... resistant to many pests and plant diseases; uses relatively less water, fertilizer, and pesticides; and...

40 CFR 63.1383 - Monitoring requirements.

Science.gov (United States)

2010-07-01

... baghouse for air leaks, torn or broken bags or filter media, or any other conditions that may cause an... clean pilot sensor, as necessary; (ii) Ensure proper adjustment of combustion air and adjust, as... Section 63.1383 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...

40 CFR 60.273 - Emission monitoring.

Science.gov (United States)

2010-07-01

... sensor must provide output of relative particulate matter loadings and the owner or operator shall... system including quality assurance procedures; (iv) How the bag leak detection system will be maintained... stack, the bag leak detection sensor must be installed downstream of the baghouse and upstream of any...

77 FR 50973 - Revision to the South Coast Portion of the California State Implementation Plan, CPV Sentinel...

Science.gov (United States)

2012-08-23

... operating data and reported emissions. \\1\\ For one project, Seagull Sanitation, the source shutdown and... Retrofit Technology at the time of shutdown. Then the District subtracted the amount of offsets that the... water or dust suppressants, enclosures and baghouses; and equipment and work standards to minimize track...

Wind energy in Denmark and within the Elsam utility area

International Nuclear Information System (INIS)

Friis, P.; Grauballe, J.

1995-01-01

At the turn of 1994, 3,700 wind turbines, with a total installed capacity of 540 MW were connected to the Danish utility grid. In 1994 these turbines fed 1,118 GWh wind energy into the grid, corresponding to approximately 3.3% of the total electricity consumption. The ELSAM utility area supplies the electric energy consumed by half the Danish population. The area has a large wind energy potential and approx. 75% of the installed wind energy capacity in Denmark is situated here accounting for 400 MW. In 1994 the ELSAM utilities supplied a total of 18,450 GWh with wind power contributing 850 GWh, i.e. 4.6% of the ELSAM sales to the consumers. (Author)

Demand-side management pricing options in electric utilities

International Nuclear Information System (INIS)

Sardana, P.; Herman, P.

1990-01-01

In 1989 Ontario Hydro implemented optional time-of-use (TOU) rates at the wholesale level for all municipal utilities in the province. At the same time, mandatory TOU rates were implemented for large users (customers with loads in excess of 5 MW) served by municipal utilities and Ontario Hydro's direct customers. To fully explore the potential of rate structures as demand-side management (DSM) tools, Ontario Hydro retained a consulting firm to carry out a survey of innovative rate structures in other jurisdications. The survey was intended to identify: the status quo of rate structures in other jurisdictions that were designed specifically to encourage DSM; a profile of the cost basis of the rate structures, for example whether traditional embedded cost of service analyses or contentious methods such as marginal cost pricing were used; whether innovative rates have been successful, and customer reactions and attitudes; and how innovative rates fit into the overall strategy of the utilities. It was found that TOU, interruptible and end-use targeted rates are the rate structures of choice for many utilities. Most are concerned with deferring capacity, reducing peak demand, and shifting load out of peak periods. Most utilities report success with their programs and satisfaction with the present form of the programs. 5 tabs

Efficient hiding of confidential high-utility itemsets with minimal side effects

Science.gov (United States)

Lin, Jerry Chun-Wei; Hong, Tzung-Pei; Fournier-Viger, Philippe; Liu, Qiankun; Wong, Jia-Wei; Zhan, Justin

2017-11-01

Privacy preserving data mining (PPDM) is an emerging research problem that has become critical in the last decades. PPDM consists of hiding sensitive information to ensure that it cannot be discovered by data mining algorithms. Several PPDM algorithms have been developed. Most of them are designed for hiding sensitive frequent itemsets or association rules. Hiding sensitive information in a database can have several side effects such as hiding other non-sensitive information and introducing redundant information. Finding the set of itemsets or transactions to be sanitised that minimises side effects is an NP-hard problem. In this paper, a genetic algorithm (GA) using transaction deletion is designed to hide sensitive high-utility itemsets for PPUM. A flexible fitness function with three adjustable weights is used to evaluate the goodness of each chromosome for hiding sensitive high-utility itemsets. To speed up the evolution process, the pre-large concept is adopted in the designed algorithm. It reduces the number of database scans required for verifying the goodness of an evaluated chromosome. Substantial experiments are conducted to compare the performance of the designed GA approach (with/without the pre-large concept), with a GA-based approach relying on transaction insertion and a non-evolutionary algorithm, in terms of execution time, side effects, database integrity and utility integrity. Results demonstrate that the proposed algorithm hides sensitive high-utility itemsets with fewer side effects than previous studies, while preserving high database and utility integrity.

Utilities and energy efficiency Denmark report

Energy Technology Data Exchange (ETDEWEB)

Olesen, G.B.; Lyck, N.C.

1996-11-01

The report is the Danish contribution to the project `Utilities and Energy Efficiency` produced for the European Commission by IET, Nikkel straat 15, 4823 AE Breda, The Netherlands. Information is given under the headings of existing situation and desired situation. Recommendations are also given under the headings of legislation concerning the objectives of the utilities, of government programs and targets, of organizational structure, required market dependence and internal objectives of the utilities, for regulation and standardization, and of tariff structure. Flow diagrams are presented for the Danish energy system 1990, 1993. The 1993 follow up of the energy plan `Energy 2000` points out that the goals set up at that time, first and foremost the 20% reduction in CO{sub 2} emissions in 2005 compared to the 1988 level, will not be reached without changes in policy, such as an increase in the use of renewable energy, more transparent and consistent tariff systems as a greater incentive for energy conservation, regulations on thermal insulation of houses, increase in public information activities,a new subsidy scheme to stimulate improvements of energy efficiency in buildings and regulations on energy supply to large buildings. (ARW) 55 refs.

The EU's Major Electricity and Gas Utilities since Market Liberalization

Energy Technology Data Exchange (ETDEWEB)

Schulke, Ch.

2010-07-01

A major change has taken place in the company structure of the European electricity and gas markets. Twenty years ago, national or regional monopolies dominated the markets and there was strictly no competition between utilities. But since the liberalization of EU energy markets began in the 1990's, companies like E.ON, GDF Suez, EDF, Enel, and RWE have become European giants with activities in a large number of Member States. The advocates of market liberalization did not expect, or even intend, the emergence of a small number of large utilities that control an increasing part of the EU market. Some observers already claim that liberalization has led to an oligopoly with detrimental consequences for competition. Based on extensive background research, this book presents a fact-based analysis of the changes in the European utility sector since the 1990's. Case studies of the seven largest utilities illustrate how companies adapted their strategies to the changing market environment. The author underlines diverging choices and common trends like geographic expansion into new markets via mergers and acquisitions or diversification of business activities with the aim of using synergies between electricity and gas. (author)

Off-gas filtration and releases: bag filters

International Nuclear Information System (INIS)

Hennart, D.M.J.G.

1985-01-01

During high-temperature incineration of radioactive waste, some metal oxides are volatilized and carried out with the off-gases. During cooling those oxides react with acidic components generated by the combustion of the fuel oil or of the waste itself. This results in a submicronic crystalline dust in which cesium isotopes are concentrated. Bag filters have been selected at S.C.K./C.E.N. to carry out the first step of dust separation. Two baghouses equipped with Teflon bags with a total filtering area of 100 m 2 have been installed. The bags are cleaned on line by compressed air backflow. The residual dust content is below 3 mg/m 3 , which is sufficiently low to be removed by HEPA filters. The baghouses were put into operation in October 1981 and since then have been on line for about 3000 hours. Some bags had to be replaced after a fire in mid-1983. (orig.)

Coal combustion by-product quality at two stoker boilers: Coal source vs. fly ash collection system design

Energy Technology Data Exchange (ETDEWEB)

Mardon, Sarah M. [Kentucky Department for Environmental Protection, Division of Water, Frankfort, KY 40601 (United States); Hower, James C. [University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511 (United States); O' Keefe, Jennifer M.K. [Morehead State University, Department of Physical Sciences, Morehead, KY 40351 (United States); Marks, Maria N. [Environmental Consulting Services, Lexington, KY 40508 (United States); Hedges, Daniel H. [University of Kentucky, Department of Earth and Environmental Sciences, Lexington, KY 40506 (United States)

2008-09-15

Fly ashes from two stoker boilers burning Pennsylvanian Eastern Kentucky high volatile A bituminous coal blends were examined for their petrology and chemistry. The source coals have similar trace element contents. One of the ash collection systems was retrofitted with a baghouse (fabric filter) system, collecting a finer fly ash at a cooler flue gas temperature than the plant that has not been reconfigured. The baghouse ash has a markedly higher trace element content than the coarser fly ash from the other plant. The enhanced trace element content is most notable in the As concentration, reaching nearly 9000 ppm (ash basis) for one of the collection units. Differences in the ash chemistry are not due to any substantial differences in the coal source, even though the coal sources were from different counties and from different coal beds, but rather to the improved pollution control system in the steam plant with the higher trace element contents. (author)

Power production from radioactively contaminated biomass and forest litter in Belarus - Phase 1b

Energy Technology Data Exchange (ETDEWEB)

Roed, J.; Andersson, K.G.; Fogh, C.L. [and others

2000-03-01

The Chernobyl accident has led to radioactive contamination of vast Belarussian forest areas. A total scheme for remediation of contaminated forest areas and utilisation of the removed biomass in safe energy production is being investigated in a Belarussian-American-Danish collaborative project. Here the total radiological impact of the scheme is considered. This means that not only the dose reductive effect of the forest decontamination is taken into account, but also the possible adverse health effects in connection with the much needed bio-energy production. This report presents the results of an in-country, commercial-scale investigation of the effect of a baghouse filter in retaining contaminants so that they are not released to the atmosphere in the biomass energy production process. Approximately 99,5 % of the activity of a commercially representative, dust-laden boiler flue gas was removed from the stream by using a combination of a cyclone and a baghouse filter. (au)

Performance evaluation of air cleaning devices of an operating low level radioactive solid waste incinerator

International Nuclear Information System (INIS)

Subramanian, V.; Surya Narayana, D.S.; Sundararajan, A.R.; Satyasai, P.M.; Ahmed, Jaleel

1997-01-01

Particle removal efficiencies of a cyclone separator, baghouse filters and a high efficiency particulate activity (HEPA) filter bank of an incinerator have been determined during the incineration of combustible low level solid radioactive wastes with surface dose of 20 - 50 gy/h. Experimental runs have been carried out to collect the particulates in various aerodynamic size ranges using an eight stage Andersen sampler and a low pressure impactor (LPI) while the incinerator is in operation. The collection efficiencies of the cyclone, baghouse and HEPA filters have been found to be 100 per cent for particles of size greater than 4.7, 2.1 and 1.1 μm respectively. The results of our investigations indicate that the air cleaning devices of the incinerator are working according to their design criteria. The data will be useful in the design and operation of air cleaning devices for toxic gaseous effluents. (author). 3 refs., 2 figs., 1 tab

Long term plan of atomic energy development and utilization

International Nuclear Information System (INIS)

1982-01-01

The atomic energy utilization and development in Japan have progressed remarkably, and already nuclear power generation has borne an important part in electric power supply, while radiation has been utilized in the fields of industry, agriculture, medicine and so on. Now, atomic energy is indispensable for national life and industrial activity. The former long term plan was decided in September, 1978, and the new long term plan should be established since the situation has changed largely. The energy substituting for petroleum has been demanded, and the expectation to nuclear power generation has heightened because it enables stable and economical power supply. The independently developed technology related to atomic energy must be put in practical use. The peaceful utilization of atomic energy must be promoted, while contributing to the nuclear non-proliferation policy. The Atomic Energy Commission of Japan decided the new long term plan to clearly show the outline of the important measures related to atomic energy development and utilization in 10 years hereafter, and the method of its promotion. The basic concept of atomic energy development and utilization, the long term prospect and the concept on the promotion, the method of promoting the development and utilization, and the problems of funds, engineers and location are described. (kako, I.)

High resolution, large deformation 3D traction force microscopy.

Directory of Open Access Journals (Sweden)

Jennet Toyjanova

Full Text Available Traction Force Microscopy (TFM is a powerful approach for quantifying cell-material interactions that over the last two decades has contributed significantly to our understanding of cellular mechanosensing and mechanotransduction. In addition, recent advances in three-dimensional (3D imaging and traction force analysis (3D TFM have highlighted the significance of the third dimension in influencing various cellular processes. Yet irrespective of dimensionality, almost all TFM approaches have relied on a linear elastic theory framework to calculate cell surface tractions. Here we present a new high resolution 3D TFM algorithm which utilizes a large deformation formulation to quantify cellular displacement fields with unprecedented resolution. The results feature some of the first experimental evidence that cells are indeed capable of exerting large material deformations, which require the formulation of a new theoretical TFM framework to accurately calculate the traction forces. Based on our previous 3D TFM technique, we reformulate our approach to accurately account for large material deformation and quantitatively contrast and compare both linear and large deformation frameworks as a function of the applied cell deformation. Particular attention is paid in estimating the accuracy penalty associated with utilizing a traditional linear elastic approach in the presence of large deformation gradients.

Incremental Frequent Subgraph Mining on Large Evolving Graphs

KAUST Repository

Abdelhamid, Ehab; Canim, Mustafa; Sadoghi, Mohammad; Bhatta, Bishwaranjan; Chang, Yuan-Chi; Kalnis, Panos

2017-01-01

, such as social networks, utilize large evolving graphs. Mining these graphs using existing techniques is infeasible, due to the high computational cost. In this paper, we propose IncGM+, a fast incremental approach for continuous frequent subgraph mining problem

Focus on vulnerable populations and promoting equity in health service utilization ––an analysis of visitor characteristics and service utilization of the Chinese community health service

OpenAIRE

Dong, Xiaoxin; liu, Ling; Cao, Shiyi; Yang, Huajie; Song, Fujian; Yang, Chen; Gong, Yanhong; Wang, Yunxia; Yin, Xiaoxu; Xie, Jun; Sun, Yi; Lu, Zuxun

2014-01-01

Background Community health service in China is designed to provide a convenient and affordable primary health service for the city residents, and to promote health equity. Based on data from a large national study of 35 cities across China, we examined the characteristics of the patients and the utilization of community health institutions (CHIs), and assessed the role of community health service in promoting equity in health service utilization for community residents. Methods Multistage sa...

Propensity score methodology for confounding control in health care utilization databases

Directory of Open Access Journals (Sweden)

Elisabetta Patorno

2013-06-01

Full Text Available Propensity score (PS methodology is a common approach to control for confounding in nonexperimental studies of treatment effects using health care utilization databases. This methodology offers researchers many advantages compared with conventional multivariate models: it directly focuses on the determinants of treatment choice, facilitating the understanding of the clinical decision-making process by the researcher; it allows for graphical comparisons of the distribution of propensity scores and truncation of subjects without overlapping PS indicating a lack of equipoise; it allows transparent assessment of the confounder balance achieved by the PS at baseline; and it offers a straightforward approach to reduce the dimensionality of sometimes large arrays of potential confounders in utilization databases, directly addressing the “curse of dimensionality” in the context of rare events. This article provides an overview of the use of propensity score methodology for pharmacoepidemiologic research with large health care utilization databases, covering recent discussions on covariate selection, the role of automated techniques for addressing unmeasurable confounding via proxies, strategies to maximize clinical equipoise at baseline, and the potential of machine-learning algorithms for optimized propensity score estimation. The appendix discusses the available software packages for PS methodology. Propensity scores are a frequently used and versatile tool for transparent and comprehensive adjustment of confounding in pharmacoepidemiology with large health care databases.

Practical characterization of large networks using neighborhood information

KAUST Repository

Wang, Pinghui; Zhao, Junzhou; Ribeiro, Bruno; Lui, John C. S.; Towsley, Don; Guan, Xiaohong

2018-01-01

querying a node also reveals partial structural information about its neighbors. Our methods are optimized for NoSQL graph databases (if the database can be accessed directly), or utilize Web APIs available on most major large networks for graph sampling

Broomrape (Orobanche cumana Wallr.) resistance breeding utilizing wild Helianthus species

Science.gov (United States)

Wild Helianthus species possess valuable resistance genes for sunflower broomrape (Orobanche cumana Wallr.), especially the 39 largely under-utilized perennial species. Resistance to race F has been transferred into cultivated background via bridging of interspecific amphiploids. More recently, a si...

Analysis of Large- Capacity Water Heaters in Electric Thermal Storage Programs

Energy Technology Data Exchange (ETDEWEB)

Cooke, Alan L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Anderson, David M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Winiarski, David W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carmichael, Robert T. [Cadeo Group, Washington D. C. (United States); Mayhorn, Ebony T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fisher, Andrew R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-03-17

This report documents a national impact analysis of large tank heat pump water heaters (HPWH) in electric thermal storage (ETS) programs and conveys the findings related to concerns raised by utilities regarding the ability of large-tank heat pump water heaters to provide electric thermal storage services.

Factors Affecting Loan Utilization And Repayment Patterns By Small ...

African Journals Online (AJOL)

The study identified factors affecting loan utilization and repayment patterns by small holder farmers of the Nigerian Agricultural Co-operative and Rural Development Bank (NACRDB) Osogbo branch in Osun State. Two Local Government Areas with large number of loan beneficiaries from 2003 to 2008 in NACRDB were ...

Changes in the way Japanese utilities raise their funds

International Nuclear Information System (INIS)

Suetsuna, I.

1979-01-01

Japan is heavily committed to the use of nuclear power but with the long lead times large amounts of capital are at present being invested without financial return. This is having a detrimental influence on the financial structure of the utilities, particularly in regard to self-financing. (U.K.)

40 CFR 63.7300 - What are my operation and maintenance requirements?

Science.gov (United States)

2010-07-01

...-term maintenance. (3) Corrective action for all baghouses applied to pushing emissions. In the event a... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What are my operation and maintenance... Battery Stacks Operation and Maintenance Requirements § 63.7300 What are my operation and maintenance...

40 CFR 63.1444 - What emissions limitations and work practice standards must I meet for my copper concentrate...

Science.gov (United States)

2010-07-01

... than 5 percent of the total operating time in any semiannual reporting period. (g) Venturi wet scrubbers. For each venturi wet scrubber applied to meet any total particulate matter emission limit in... test. (h) Other control devices. For each control device other than a baghouse or venturi wet scrubber...

40 CFR 63.7790 - What emission limitations must I meet?

Science.gov (United States)

2010-07-01

...) For each venturi scrubber applied to meet any particulate emission limit in Table 1 to this subpart, you must maintain the hourly average pressure drop and scrubber water flow rate at or above the... other than a baghouse, venturi scrubber, or electrostatic precipitator must submit a description of the...

40 CFR 63.11163 - What are the standards and compliance requirements for new sources?

Science.gov (United States)

2010-07-01

... Nonferrous Metals Area Sources-Zinc, Cadmium, and Beryllium Primary Zinc Production Facilities § 63.11163... of the baghouse and upstream of any wet scrubber. (viii) Where multiple detectors are required, the system's instrumentation and alarm may be shared among detectors. (2) You must develop and submit to the...

Economic viability of large-scale fusion systems

Energy Technology Data Exchange (ETDEWEB)

Helsley, Charles E., E-mail: cehelsley@fusionpowercorporation.com; Burke, Robert J.

2014-01-01

A typical modern power generation facility has a capacity of about 1 GWe (Gigawatt electric) per unit. This works well for fossil fuel plants and for most fission facilities for it is large enough to support the sophisticated generation infrastructure but still small enough to be accommodated by most utility grid systems. The size of potential fusion power systems may demand a different viewpoint. The compression and heating of the fusion fuel for ignition requires a large driver, even if it is necessary for only a few microseconds or nanoseconds per energy pulse. The economics of large systems, that can effectively use more of the driver capacity, need to be examined. The assumptions used in this model are specific for the Fusion Power Corporation (FPC) SPRFD process but could be generalized for any system. We assume that the accelerator is the most expensive element of the facility and estimate its cost to be $20 billion. Ignition chambers and fuel handling facilities are projected to cost $1.5 billion each with up to 10 to be serviced by one accelerator. At first this seems expensive but that impression has to be tempered by the energy output that is equal to 35 conventional nuclear plants. This means the cost per kWh is actually low. Using the above assumptions and industry data for generators and heat exchange systems, we conclude that a fully utilized fusion system will produce marketable energy at roughly one half the cost of our current means of generating an equivalent amount of energy from conventional fossil fuel and/or fission systems. Even fractionally utilized systems, i.e. systems used at 25% of capacity, can be cost effective in many cases. In conclusion, SPRFD systems can be scaled to a size and configuration that can be economically viable and very competitive in today's energy market. Electricity will be a significant element in the product mix but synthetic fuels and water may also need to be incorporated to make the large system

Economic viability of large-scale fusion systems

International Nuclear Information System (INIS)

Helsley, Charles E.; Burke, Robert J.

2014-01-01

A typical modern power generation facility has a capacity of about 1 GWe (Gigawatt electric) per unit. This works well for fossil fuel plants and for most fission facilities for it is large enough to support the sophisticated generation infrastructure but still small enough to be accommodated by most utility grid systems. The size of potential fusion power systems may demand a different viewpoint. The compression and heating of the fusion fuel for ignition requires a large driver, even if it is necessary for only a few microseconds or nanoseconds per energy pulse. The economics of large systems, that can effectively use more of the driver capacity, need to be examined. The assumptions used in this model are specific for the Fusion Power Corporation (FPC) SPRFD process but could be generalized for any system. We assume that the accelerator is the most expensive element of the facility and estimate its cost to be $20 billion. Ignition chambers and fuel handling facilities are projected to cost $1.5 billion each with up to 10 to be serviced by one accelerator. At first this seems expensive but that impression has to be tempered by the energy output that is equal to 35 conventional nuclear plants. This means the cost per kWh is actually low. Using the above assumptions and industry data for generators and heat exchange systems, we conclude that a fully utilized fusion system will produce marketable energy at roughly one half the cost of our current means of generating an equivalent amount of energy from conventional fossil fuel and/or fission systems. Even fractionally utilized systems, i.e. systems used at 25% of capacity, can be cost effective in many cases. In conclusion, SPRFD systems can be scaled to a size and configuration that can be economically viable and very competitive in today's energy market. Electricity will be a significant element in the product mix but synthetic fuels and water may also need to be incorporated to make the large system economically

Power Sales to Electric Utilities

Energy Technology Data Exchange (ETDEWEB)

None

1989-02-01

The Public Utilities Regulatory Policies Act (PURPA) of 1979 requires that electrical utilities interconnect with qualifying facilities and purchase electricity at a rate based upon their full avoided costs (i.e., costs of providing both capacity and energy). Qualifying facilities (QF) include solar or geothermal electric units, hydropower, municipal solid waste or biomass-fired power plants, and cogeneration projects that satisfy maximum size, fuel use, ownership, location, and/or efficiency criteria. In Washington State, neither standard power purchase prices based upon a proxy ''avoided plant'', standard contracts, or a standard offer process have been used. Instead, a variety of power purchase contracts have been negotiated by developers of qualifying facilities with investor-owned utilities, public utility districts, and municipally-owned and operated utilities. With a hydro-based system, benefits associated with resource acquisition are determined in large part by how compatible the resource is with a utility's existing generation mix. Power purchase rates are negotiated and vary according to firm energy production, guarantees, ability to schedule maintenance or downtime, rights of refusal, power plant purchase options, project start date and length of contract; front-loading or levelization provisions; and the ability of the project to provide ''demonstrated'' capacity. Legislation was also enacted which allows PURPA to work effectively. Initial laws established ownership rights and provided irrigation districts, PUDs, and municipalities with expanded enabling powers. Financial processes were streamlined and, in some cases, simplified. Finally, laws were passed which are designed to ensure that development proceeds in an environmentally acceptable manner. In retrospect, PURPA has worked well within Washington. In the state of Washington, 20 small-scale hydroelectric projects with a combined generating capacity of

Siting guidelines for utility application of wind turbines. Final report

Energy Technology Data Exchange (ETDEWEB)

Pennell, W.T.

1983-01-01

Utility-oriented guidelines are described for identifying viable sites for wind turbines. Topics and procedures are also discussed that are important in carrying out a wind turbine siting program. These topics include: a description of the Department of Energy wind resource atlases; procedures for predicting wind turbine performance at potential sites; methods for analyzing wind turbine economics; procedures for estimating installation and maintenance costs; methods for anlayzing the distribution of wind resources over an area; and instrumentation for documenting wind behavior at potential sites. The procedure described is applicable to small and large utilities. Although the procedure was developed as a site-selection tool, it can also be used by a utility who wishes to estimate the potential for wind turbine penetration into its future generation mix.

The marginal utility of money: A modern Marshallian approach to consumer choice

OpenAIRE

Friedman, Daniel; Sákovics, József

2011-01-01

We reformulate neoclassical consumer choice by focusing on [lambda], the marginal utility of money. As the opportunity cost of current expenditure, [lambda] is approximated by the slope of the indirect utility function of the continuation. We argue that [lambda] can largely supplant the role of an arbitrary budget constraint in partial equilibrium analysis. The result is a better grounded, more exible and more intuitive approach to consumer choice.

Network Bandwidth Utilization Forecast Model on High Bandwidth Network

Energy Technology Data Exchange (ETDEWEB)

Yoo, Wucherl; Sim, Alex

2014-07-07

With the increasing number of geographically distributed scientific collaborations and the scale of the data size growth, it has become more challenging for users to achieve the best possible network performance on a shared network. We have developed a forecast model to predict expected bandwidth utilization for high-bandwidth wide area network. The forecast model can improve the efficiency of resource utilization and scheduling data movements on high-bandwidth network to accommodate ever increasing data volume for large-scale scientific data applications. Univariate model is developed with STL and ARIMA on SNMP path utilization data. Compared with traditional approach such as Box-Jenkins methodology, our forecast model reduces computation time by 83.2percent. It also shows resilience against abrupt network usage change. The accuracy of the forecast model is within the standard deviation of the monitored measurements.

Network bandwidth utilization forecast model on high bandwidth networks

Energy Technology Data Exchange (ETDEWEB)

Yoo, Wuchert (William) [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sim, Alex [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-03-30

With the increasing number of geographically distributed scientific collaborations and the scale of the data size growth, it has become more challenging for users to achieve the best possible network performance on a shared network. We have developed a forecast model to predict expected bandwidth utilization for high-bandwidth wide area network. The forecast model can improve the efficiency of resource utilization and scheduling data movements on high-bandwidth network to accommodate ever increasing data volume for large-scale scientific data applications. Univariate model is developed with STL and ARIMA on SNMP path utilization data. Compared with traditional approach such as Box-Jenkins methodology, our forecast model reduces computation time by 83.2%. It also shows resilience against abrupt network usage change. The accuracy of the forecast model is within the standard deviation of the monitored measurements.

Optimized Design and Discussion on Middle and Large CANDLE Reactors

Directory of Open Access Journals (Sweden)

Xiaoming Chai

2012-08-01

Full Text Available CANDLE (Constant Axial shape of Neutron flux, nuclide number densities and power shape During Life of Energy producing reactor reactors have been intensively researched in the last decades [1–6]. Research shows that this kind of reactor is highly economical, safe and efficiently saves resources, thus extending large scale fission nuclear energy utilization for thousands of years, benefitting the whole of society. For many developing countries with a large population and high energy demands, such as China and India, middle (1000 MWth and large (2000 MWth CANDLE fast reactors are obviously more suitable than small reactors [2]. In this paper, the middle and large CANDLE reactors are investigated with U-Pu and combined ThU-UPu fuel cycles, aiming to utilize the abundant thorium resources and optimize the radial power distribution. To achieve these design purposes, the present designs were utilized, simply dividing the core into two fuel regions in the radial direction. The less active fuel, such as thorium or natural uranium, was loaded in the inner core region and the fuel with low-level enrichment, e.g. 2.0% enriched uranium, was loaded in the outer core region. By this simple core configuration and fuel setting, rather than using a complicated method, we can obtain the desired middle and large CANDLE fast cores with reasonable core geometry and thermal hydraulic parameters that perform safely and economically; as is to be expected from CANDLE. To assist in understanding the CANDLE reactor’s attributes, analysis and discussion of the calculation results achieved are provided.

Progress report on joint utilization of the Musashi reactor, 10(1985)

International Nuclear Information System (INIS)

1986-06-01

The results of the research by those who commonly utilized the reactor in Musashi Institute of Technology and others in fiscal year 1985 were compiled as a report. The number of application was one case of medical treatment, three cases related to living things, five experiments and 34 cases of general irradiation, and all were adopted. The number of actual utilization was all except one case related to living things. The actual result of the daily utilization from September, 1985 to March, 1986 is shown. The gists of 42 reports are collected. In fiscal year 1986, 44 researches are adopted for the common utilization of the reactor and others. The connection between the Musashi reactor and the large computer center in University of Tokyo was increased to 9600 bps, and 4800 bps are used for carrying out remote jobs as before, while 4800 bps are used for utilizing four TSS terminal equipments. (Kako, I.)

The Utilization of Low Frequency Raman Spectra of Gases for the Study of Molecules with Large Amplitude Vibration

Institute of Scientific and Technical Information of China (English)

James R. Durig; Sarah Xiao-hua Zhou; Joshua Klaassen; Arindam Ganguly

2009-01-01

The utilization of the Raman spectra of the low frequency bending mode for three quasi-linear molecules, disiloxane, (SiH3)2 O; methylisocyanate, CH3NCO; and dimethy lisocyanate, (CH3)2SiHNCO for observing the low frequency anharmonic bending vibration is demonstrated which is superior to the corresponding far infrared spectra. From the observed frequencies from the Raman spectra the potential function governing the heavy atom motion to linearity has been obtained from which the barrier has been determined. These experimental values are compared to the ab ini-tio predicted values. Also low frequency Raman spectra of the ring puckering vibration of chlorocy-clobutane, c-C4H7Cl, bromocyclobutane, c-C4H7Br, and aminocyclobutane, c-C4H7NH2, have been utilized to obtain the potential function governing the ring inversion for these molecules. The deter-mined barriers to planarity are compared to those obtained from MP2 (full) ab initio and density functional theory B3LYP calculations by utilizing a variety of basis sets. For all of these studies it is shown that the Raman spectra are superior to the infrared spectra for determining the frequencies of the excited state transitions.

Stakeholder needs for ground penetrating radar utility location

Science.gov (United States)

Thomas, A. M.; Rogers, C. D. F.; Chapman, D. N.; Metje, N.; Castle, J.

2009-04-01

In the UK alone there are millions of miles of underground utilities with often inaccurate, incomplete, or non-existent location records that cause significant health and safety problems for maintenance personnel, together with the potential for large, unnecessary, social and financial costs for their upkeep and repair. This has led to increasing use of Ground Penetrating Radar (GPR) for utility location, but without detailed consideration of the degree of location accuracy required by stakeholders — i.e. all those directly involved in streetworks ranging from utility owners to contractors and surveyors and government departments. In order to ensure that stakeholder requirements are incorporated into a major new UK study, entitled Mapping the Underworld, a questionnaire has been used to determine the current and future utility location accuracy requirements. The resulting data indicate that stakeholders generally require location tolerances better than 100 mm at depths usually extending down to 3 m, and more occasionally to 5 m, below surface level, providing significant challenges to GPR if their needs are to be met in all ground conditions. As well as providing much useful data on stakeholder needs, these data are also providing a methodology for assessment of GPR utility location in terms of the factor most important to them — the degree to which the equipment provides location within their own accuracy requirements.

Practical characterization of large networks using neighborhood information

KAUST Repository

Wang, Pinghui

2018-02-14

Characterizing large complex networks such as online social networks through node querying is a challenging task. Network service providers often impose severe constraints on the query rate, hence limiting the sample size to a small fraction of the total network of interest. Various ad hoc subgraph sampling methods have been proposed, but many of them give biased estimates and no theoretical basis on the accuracy. In this work, we focus on developing sampling methods for large networks where querying a node also reveals partial structural information about its neighbors. Our methods are optimized for NoSQL graph databases (if the database can be accessed directly), or utilize Web APIs available on most major large networks for graph sampling. We show that our sampling method has provable convergence guarantees on being an unbiased estimator, and it is more accurate than state-of-the-art methods. We also explore methods to uncover shortest paths between a subset of nodes and detect high degree nodes by sampling only a small fraction of the network of interest. Our results demonstrate that utilizing neighborhood information yields methods that are two orders of magnitude faster than state-of-the-art methods.

40 CFR 63.1453 - How do I demonstrate continuous compliance with the emission limitations, work practice standards...

Science.gov (United States)

2010-07-01

... responsible official in the next semiannual compliance report. (d) Venturi wet scrubbers. For each venturi wet...; (2) Inspect and maintain each venturi wet scrubber CPMS according to § 63.1452(c) and recording all... device other than a baghouse or venturi wet scrubber subject to the operating limits for site-specific...

40 CFR 62.14840 - What definitions must I know?

Science.gov (United States)

2010-07-01

... primary chamber. Solid waste means any garbage, refuse, sludge from a waste treatment plant, water supply... fuel. Bag leak detection system means an instrument that is capable of monitoring particulate matter loadings in the exhaust of a fabric filter (i.e., baghouse) in order to detect bag failures. A bag leak...

40 CFR 60.2875 - What definitions must I know?

Science.gov (United States)

2010-07-01

.... Solid waste means any garbage, refuse, sludge from a waste treatment plant, water supply treatment plant... fuel means natural gas, liquified petroleum gas, fuel oil, or diesel fuel. Bag leak detection system... filter (i.e., baghouse) in order to detect bag failures. A bag leak detection system includes, but is not...

IRP methods for Environmental Impact Statements of utility expansion plans

International Nuclear Information System (INIS)

Cavallo, J.D.; Hemphill, R.C.; Veselka, T.D.

1992-01-01

Most large electric utilities and a growing number of gas utilities in the United States are using a planning method -- Integrated Resource Planning (IRP) - which incorporates demand-side management (DSM) programs whenever the marginal cost of the DSM programs are lower than the marginal cost of supply-side expansion options. Argonne National Laboratory has applied the IRP method in its socio-economic analysis of an Environmental Impact Statement (EIS) of power marketing for a system of electric utilities in the mountain and western regions of the United States. Applying the IRP methods provides valuable information to the participants in an EIS process involving capacity expansion of an electric or gas utility. The major challenges of applying the IRP method within an EIS are the time consuming and costly task of developing a least cost expansion path for each altemative, the detailed quantification of environmental damages associated with capacity expansion, and the explicit inclusion of societal-impacts to the region

Spatial and temporal price variations of sawn wood utilized for ...

African Journals Online (AJOL)

O Y Ogunsanwo

UTILIZED FOR FURNITURE MAKING IN SELECTED CITIES IN NIGERIA ... 193 furniture factories comprising of 154 small, 28 medium and 11 large scale were selected in ... recommended that suitable policies that will ensure market integration through proper ..... Organized by the African Network for Wood Reaserch and.

Handbook of evaluation of utility DSM programs

Energy Technology Data Exchange (ETDEWEB)

Hirst, E.; Reed, J. [eds.; Bronfman, B.; Fitzpatrick, G.; Hicks, E.; Hirst, E.; Hoffman, M.; Keating, K.; Michaels, H.; Nadel, S.; Peters, J.; Reed, J.; Saxonis, W.; Schoen, A.; Violette, D.

1991-12-01

Program evaluation has become a central issue in the world of utility integrated resource planning. The DSM programs that utilities were operating to meet federal requirements or to improve customer relations are now becoming big business. DSM is being considered an important resource in a utility`s portfolio of options. In the last five years, the amount of money that utilities have invested in DSM has grown exponentially in most regulatory jurisdictions. Market analysts are now talking about DSM being a $30 billion industry by the end of the decade. If the large volume of DSM-program investments was not enough to highlight the importance of evaluation, then the introduction of regulatory incentives has really focused the spotlight. This handbook was developed through a process that involved many of those people who represent the diverse constituencies of DSM-program evaluation. We have come to recognize the many technical disciplines that must be employed to evaluate DSM programs. An analysis might start out based on the principles of utility load research to find out what happened, but a combination of engineering and statistical methods must be used to ``triangulate`` an estimate of what would have happened without the program. The difference, of course, is that elusive but prized result of evaluation: what happened as the direct result of the DSM program. Technical performance of DSM measures is not the sole determinant of the answer, either. We also recognize the importance of such behavioral attributes of DSM as persistence and free ridership. Finally, DSM evaluation is meaningless without attention to planning an approach, communicating results to relevant decision-makers, and focusing as much on the process as the impacts of the program. These topics are all covered in this handbook.

Analysis of large databases in vascular surgery.

Science.gov (United States)

Nguyen, Louis L; Barshes, Neal R

2010-09-01

Large databases can be a rich source of clinical and administrative information on broad populations. These datasets are characterized by demographic and clinical data for over 1000 patients from multiple institutions. Since they are often collected and funded for other purposes, their use for secondary analysis increases their utility at relatively low costs. Advantages of large databases as a source include the very large numbers of available patients and their related medical information. Disadvantages include lack of detailed clinical information and absence of causal descriptions. Researchers working with large databases should also be mindful of data structure design and inherent limitations to large databases, such as treatment bias and systemic sampling errors. Withstanding these limitations, several important studies have been published in vascular care using large databases. They represent timely, "real-world" analyses of questions that may be too difficult or costly to address using prospective randomized methods. Large databases will be an increasingly important analytical resource as we focus on improving national health care efficacy in the setting of limited resources.

Large-scale fabrication and utilization of novel hexagonal/turbostratic composite boron nitride nanosheets

KAUST Repository

Zhong, Bo

2017-02-15

In this report, we have developed a scalable approach to massive synthesis of hexagonal/turbostratic composite boron nitride nanosheets (h/t-BNNSs). The strikingly effective, reliable, and high-throughput (grams) synthesis is performed via a facile chemical foaming process at 1400°C utilizing ammonia borane (AB) as precursor. The characterization results demonstrate that high quality of h/t-BNNSs with lateral size of tens of micrometers and thickness of tens of nanometers are obtained. The growth mechanism of h/t-BNNSs is also discussed based on the thermogravimetric analysis of AB which clearly shows two step weight loss. The h/t-BNNSs are further used for making thermoconductive h/t-BNNSs/epoxy resin composites. The thermal conductivity of the composites is obviously improved due to the introduction of h/t-BNNSs. Consideration of the unique properties of boron nitride, these novel h/t-BNNSs are envisaged to be very valuable for future high performance polymer based material fabrication.

Pediatric Dentist Density and Preventive Care Utilization for Medicaid Children.

Science.gov (United States)

Heidenreich, James F; Kim, Amy S; Scott, JoAnna M; Chi, Donald L

2015-01-01

The purpose of this study was to evaluate county-level pediatric dentist density and dental care utilization for Medicaid-enrolled children. This was a cross-sectional analysis of 604,885 zero- to 17-year-olds enrolled in the Washington State Medicaid Program for 11-12 months in 2012. The relationship between county-level pediatric dentist density, defined as the number of pediatric dentists per 10,000 Medicaid-enrolled children, and preventive dental care utilization was evaluated using linear regression models. In 2012, 179 pediatric dentists practiced in 16 of the 39 counties in Washington. County-level pediatric dentist density varied from zero to 5.98 pediatric dentists per 10,000 Medicaid-enrolled children. County-level preventive dental care utilization ranged from 32 percent to 81 percent, with 62 percent of Medicaid-enrolled children utilizing preventive dental services. County-level density was significantly associated with county-level dental care utilization (Slope equals 1.67, 95 percent confidence interval equals 0.02, 3.32, Pchildren who utilize preventive dental care services. Policies aimed at improving pediatric oral health disparities should include strategies to increase the number of oral health care providers, including pediatric dentists, in geographic areas with large proportions of Medicaid-enrolled children.

Constraints to waste utilization and disposal

Energy Technology Data Exchange (ETDEWEB)

Steadman, E.N.; Sondreal, E.A.; Hassett, D.J.; Eylands, K.E.; Dockter, B.A. [Univ. of North Dakota, Grand Forks, ND (United States)

1995-12-01

The value of coal combustion by-products for various applications is well established by research and commercial practice worldwide. As engineering construction materials, these products can add value and enhance strength and durability while simultaneously reducing cost and providing the environmental benefit of reduced solid waste disposal. In agricultural applications, gypsum-rich products can provide plant nutrients and improve the tilth of depleted soils over large areas of the country. In waste stabilization, the cementitious and pozzolanic properties of these products can immobilize hazardous nuclear, organic, and metal wastes for safe and effective environmental disposal. Although the value of coal combustion by-products for various applications is well established, the full utilization of coal combustion by-products has not been realized in most countries. The reasons for the under utilization of these materials include attitudes that make people reluctant to use waste materials, lack of engineering standards for high-volume uses beyond eminent replacement, and uncertainty about the environmental safety of coal ash utilization. More research and education are needed to increase the utilization of these materials. Standardization of technical specifications should be pursued through established standards organizations. Adoption of uniform specifications by government agencies and user trade associations should be encouraged. Specifications should address real-world application properties, such as air entrainment in concrete, rather than empirical parameters (e.g., loss on ignition). The extensive environmental assessment data already demonstrating the environmental safety of coal ash by-products in many applications should be more widely used, and data should be developed to include new applications.

Northeast Utilities' participation in the Kaman/NASA wind power program

Science.gov (United States)

Lotker, M.

1975-01-01

The role of Northeast Utilities in the Kaman/NASA large wind generator study is reviewed. The participation falls into four principal areas: (1) technical assistance; (2) economic analysis; (3) applications; and (4) institutional and legal. A model for the economic viability of wind power is presented.

Forecasting distributions of large federal-lands fires utilizing satellite and gridded weather information

Science.gov (United States)

H.K. Preisler; R.E. Burgan; J.C. Eidenshink; J.M. Klaver; R.W. Klaver

2009-01-01

The current study presents a statistical model for assessing the skill of fire danger indices and for forecasting the distribution of the expected numbers of large fires over a given region and for the upcoming week. The procedure permits development of daily maps that forecast, for the forthcoming week and within federal lands, percentiles of the distributions of (i)...

Youth Mental Health Services Utilization Rates After a Large-Scale Social Media Campaign: Population-Based Interrupted Time-Series Analysis.

Science.gov (United States)

Booth, Richard G; Allen, Britney N; Bray Jenkyn, Krista M; Li, Lihua; Shariff, Salimah Z

2018-04-06

Despite the uptake of mass media campaigns, their overall impact remains unclear. Since 2011, a Canadian telecommunications company has operated an annual, large-scale mental health advocacy campaign (Bell Let's Talk) focused on mental health awareness and stigma reduction. In February 2012, the campaign began to explicitly leverage the social media platform Twitter and incented participation from the public by promising donations of Can $0.05 for each interaction with a campaign-specific username (@Bell_LetsTalk). The intent of the study was to examine the impact of this 2012 campaign on youth outpatient mental health services in the province of Ontario, Canada. Monthly outpatient mental health visits (primary health care and psychiatric services) were obtained for the Ontario youth aged 10 to 24 years (approximately 5.66 million visits) from January 1, 2006 to December 31, 2015. Interrupted time series, autoregressive integrated moving average modeling was implemented to evaluate the impact of the campaign on rates of monthly outpatient mental health visits. A lagged intervention date of April 1, 2012 was selected to account for the delay required for a patient to schedule and attend a mental health-related physician visit. The inclusion of Twitter into the 2012 Bell Let's Talk campaign was temporally associated with an increase in outpatient mental health utilization for both males and females. Within primary health care environments, female adolescents aged 10 to 17 years experienced a monthly increase in the mental health visit rate from 10.2/1000 in April 2006 to 14.1/1000 in April 2015 (slope change of 0.094 following campaign, Pcampaign, Pcampaign (slope change of 0.005, P=.02; slope change of 0.003, P=.005, respectively). For young adults aged 18 to 24 years, females who used primary health care experienced the most significant increases in mental health visit rates from 26.5/1000 in April 2006 to 29.2/1000 in April 2015 (slope change of 0.17 following

Possibilities of utilizing power plant fly ashes

Directory of Open Access Journals (Sweden)

Mezencevová Andrea

2003-09-01

Full Text Available The burning of fossil fuels in industrial power stations plays a significant role in the production of thermal and electrical energy. Modern thermal power plants are producing large amounts of solid waste, mainly fly ashes. The disposal of power plant waste is a large environmental problem at the present time. In this paper, possibilities of utilization of power plant fly ashes in industry, especially in civil engineering, are presented. The fly ash is a heterogeneous material with various physical, chemical and mineralogical properties, depending on the mineralogical composition of burned coal and on the used combustion technology. The utilization of fly ashes is determined of their properties. The fineness, specific surface area, particle shape, density, hardness, freeze-thaw resistance, etc. are decisive. The building trade is a branch of industry, which employs fly ash in large quantities for several decades.The best utilization of fluid fly ashes is mainly in the production of cement and concrete, due to the excellent pozzolanic and cementitious properties of this waste. In the concrete processing, the fly ash is utilized as a replacement of the fine aggregate (fine filler or a partial replacement for cement (active admixture. In addition to economic and ecological benefits, the use of fly ash in concrete improves its workability and durability, increases compressive and flexural strength, reduces segregation, bleeding, shrinkage, heat evolution and permeability and enhances sulfate resistance of concrete.The aim of current research is to search for new technologies for the fly ash utilization. The very interesting are biotechnological methods to recovery useful components of fly ashes and unconventional methods of modification of fly ash properties such as hydrothermal zeolitization and mechanochemical modification of its properties. Mechanochemistry deals with physico - chemical transformations and chemical reactions of solids induced by

40 CFR 63.1446 - What alternative emission limitation may I meet for my combined gas streams?

Science.gov (United States)

2010-07-01

... than a baghouse or venturi wet scrubber applied to meet any total particulate matter emission limit in... than 5 percent of the total operating time in any semiannual reporting period. (d) For each venturi wet scrubber applied to meet any total particulate matter emission limit in paragraph (b) of this section, you...

40 CFR 63.1450 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Science.gov (United States)

2010-07-01

... mean of the results for the three separate test runs is used. (4) For a venturi wet scrubber applied to... the applicable emission limit. (5) For a control device other than a baghouse or venturi wet scrubber... pressure drop and scrubber water flow rate, you must establish site-specific operating limits according to...

40 CFR 63.11468 - What are the monitoring requirements for new and existing sources?

Science.gov (United States)

2010-07-01

... baghouse, including but not limited to air leaks, torn or broken bags or filter media, or any other... install the bag leak detection sensor downstream of the fabric filter. (viii) Where multiple detectors are...) Inspecting the fabric filter for air leaks, torn or broken bags or filter media, or any other condition that...

77 FR 51915 - Approval and Promulgation of Air Quality Implementation Plans; State of New York; Regional Haze...

Science.gov (United States)

2012-08-28

... requirements that are characteristic for the different types of emissions sources. These include electric... rotary kiln be removed from the permit since the requirement to install a baghouse was not intended to... EPA in the April 25, 2012 proposal for the rotary kiln. The permit amendments also provide a new SO 2...

Productivity growth and price regulation of Slovenian water distribution utilities

Directory of Open Access Journals (Sweden)

Jelena Zorić

2010-06-01

Full Text Available This paper aims to analyse the price regulation method and performance of thewater industry in Slovenia. A stochastic cost frontier model is employed to estimate and decompose the total factor productivity (TFP growth of water distribution utilities in the 1997-2003 period. The main goal is to find out whether the lack of proper incentives to improve performance has resulted in the low TFP growth of Slovenian water distribution utilities. The evidence suggests that cost inefficiencies are present in water utilities, which indicates considerable cost saving potential in the analysed industry. Technical change is found to have positively affected the TFP growth over time, while cost inefficiency levels remained essentially unchanged. Overall, the average annual TFP growth in the analysed period is estimated to be only slightly above zero, which is a relatively poor result. This can largely be contributed to the present institutional and regulatory setting that does not stimulate utilities to improve productivity. Therefore, the introduction of an independent regulatory agency and an incentive-based price regulation scheme should be seriously considered in order to enhance the performance of Slovenian water distribution utilities.

Modernization of the gas utility; La modernisation du service public du gaz

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-04-01

After a large discussion, the project of law for the modernization of the French gas utility and for the development of gas companies was finally adopted by the government on May 17, 2000. This legislative project aims at modernizing and strengthening the gas public utility and adapting the gas sector to the progressive opening of this market to international competition with keeping up the quality and security of supplies and the position of French gas operators. (J.S.)

Large-scale educational telecommunications systems for the US: An analysis of educational needs and technological opportunities

Science.gov (United States)

Morgan, R. P.; Singh, J. P.; Rothenberg, D.; Robinson, B. E.

1975-01-01

The needs to be served, the subsectors in which the system might be used, the technology employed, and the prospects for future utilization of an educational telecommunications delivery system are described and analyzed. Educational subsectors are analyzed with emphasis on the current status and trends within each subsector. Issues which affect future development, and prospects for future use of media, technology, and large-scale electronic delivery within each subsector are included. Information on technology utilization is presented. Educational telecommunications services are identified and grouped into categories: public television and radio, instructional television, computer aided instruction, computer resource sharing, and information resource sharing. Technology based services, their current utilization, and factors which affect future development are stressed. The role of communications satellites in providing these services is discussed. Efforts to analyze and estimate future utilization of large-scale educational telecommunications are summarized. Factors which affect future utilization are identified. Conclusions are presented.

Supporting Building Portfolio Investment and Policy Decision Making through an Integrated Building Utility Data Platform

Energy Technology Data Exchange (ETDEWEB)

Aziz, Azizan [Carnegie Mellon Univ., Pittsburgh, PA (United States); Lasternas, Bertrand [Carnegie Mellon Univ., Pittsburgh, PA (United States); Alschuler, Elena [US DOE; View Inc; Loftness, Vivian [Carnegie Mellon Univ., Pittsburgh, PA (United States); Wang, Haopeng [Carnegie Mellon Univ., Pittsburgh, PA (United States); Mo, Yunjeong [Carnegie Mellon Univ., Pittsburgh, PA (United States); Wang, Ting [Carnegie Mellon Univ., Pittsburgh, PA (United States); Zhang, Chenlu [Carnegie Mellon Univ., Pittsburgh, PA (United States); Sharma, Shilpi [Carnegie Mellon; Stevens, Ivana [Carnegie Mellon Univ., Pittsburgh, PA (United States)

2016-03-18

The American Recovery and Reinvestment Act stimulus funding of 2009 for smart grid projects resulted in the tripling of smart meters deployment. In 2012, the Green Button initiative provided utility customers with access to their real-time1 energy usage. The availability of finely granular data provides an enormous potential for energy data analytics and energy benchmarking. The sheer volume of time-series utility data from a large number of buildings also poses challenges in data collection, quality control, and database management for rigorous and meaningful analyses. In this paper, we will describe a building portfolio-level data analytics tool for operational optimization, business investment and policy assessment using 15-minute to monthly intervals utility data. The analytics tool is developed on top of the U.S. Department of Energy’s Standard Energy Efficiency Data (SEED) platform, an open source software application that manages energy performance data of large groups of buildings. To support the significantly large volume of granular interval data, we integrated a parallel time-series database to the existing relational database. The time-series database improves on the current utility data input, focusing on real-time data collection, storage, analytics and data quality control. The fully integrated data platform supports APIs for utility apps development by third party software developers. These apps will provide actionable intelligence for building owners and facilities managers. Unlike a commercial system, this platform is an open source platform funded by the U.S. Government, accessible to the public, researchers and other developers, to support initiatives in reducing building energy consumption.

Laboratory cost and utilization containment.

Science.gov (United States)

Steiner, J W; Root, J M; White, D C

1991-01-01

The authors analyzed laboratory costs and utilization in 3,771 cases of Medicare inpatients admitted to a New England academic medical center ("the Hospital") from October 1, 1989 to September 30, 1990. The data were derived from the Hospital's Decision Resource System comprehensive data base. The authors established a historical reference point for laboratory costs as a percentage of total inpatient costs using 1981-82 Medicare claims data and cost report information. Inpatient laboratory costs were estimated at 9.5% of total inpatient costs for pre-Diagnostic Related Groups (DRGs) Medicare discharges. Using this reference point and adjusting for the Hospital's 1990 case mix, the "expected" laboratory cost was 9.3% of total cost. In fact, the cost averaged 11.5% (i.e., 24% above the expected cost level), and costs represented an even greater percentage of DRG reimbursement at 12.9%. If we regard the reimbursement as a total cost target (to eliminate losses from Medicare), then that 12.9% is 39% above the "expected" laboratory proportion of 9.3%. The Hospital lost an average of $1,091 on each DRG inpatient. The laboratory contributed 29% to this loss per case. Compared to other large hospitals, the Hospital was slightly (3%) above the mean direct cost per on-site test and significantly (58%) above the mean number of inpatient tests per inpatient day compared to large teaching hospitals. The findings suggest that careful laboratory cost analyses will become increasingly important as the proportion of patients reimbursed in a fixed manner grows. The future may hold a prospective zero-based laboratory budgeting process based on predictable patterns of DRG admissions or other fixed-reimbursement admission and laboratory utilization patterns.

Feasibility study on utilization of associated gas as CNG

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The Back Ho oilfield is the largest oilfield in Vietnam and at the same time is producing the largest amount of natural gas (associated gas) in Vietnam. Although the majority of the associated gas has been used in the power generation plant, a large amount of surplus gas is not effectively used because of shortage of fund and technologies. Accordingly, a feasibility study has been executed for a project to compress 20% of the associated gas into CNG, and use it effectively as automobile and factory fuel. As a result of the site survey, it was found that, although Vietnam consumes less amount of energy and emits less amount of CO2, the nation has a strong interest and a large amount of knowledge about global warming and CDM because the country is subjected to large effect of warming. Furthermore, it has been reconfirmed that introducing CNG into this territory is highly effective. Discussions have been made on places of installing the facilities, effective surplus gas utilization systems, facility specifications, utilities, and number of workers. Calculations were made on approximate cost of the facilities and the running cost. As a result of the surveys and discussions, it was determined that technological support from Japan and the Yen loan for environment with low interest rate are necessary. (NEDO)

Worst-Case-Optimal Dynamic Reinsurance for Large Claims

DEFF Research Database (Denmark)

Korn, Ralf; Menkens, Olaf; Steffensen, Mogens

2012-01-01

We control the surplus process of a non-life insurance company by dynamic proportional reinsurance. The objective is to maximize expected (utility of the) surplus under the worst-case claim development. In the large claim case with a worst-case upper limit on claim numbers and claim sizes, we fin...

An Incremental High-Utility Mining Algorithm with Transaction Insertion

Science.gov (United States)

Gan, Wensheng; Zhang, Binbin

2015-01-01

Association-rule mining is commonly used to discover useful and meaningful patterns from a very large database. It only considers the occurrence frequencies of items to reveal the relationships among itemsets. Traditional association-rule mining is, however, not suitable in real-world applications since the purchased items from a customer may have various factors, such as profit or quantity. High-utility mining was designed to solve the limitations of association-rule mining by considering both the quantity and profit measures. Most algorithms of high-utility mining are designed to handle the static database. Fewer researches handle the dynamic high-utility mining with transaction insertion, thus requiring the computations of database rescan and combination explosion of pattern-growth mechanism. In this paper, an efficient incremental algorithm with transaction insertion is designed to reduce computations without candidate generation based on the utility-list structures. The enumeration tree and the relationships between 2-itemsets are also adopted in the proposed algorithm to speed up the computations. Several experiments are conducted to show the performance of the proposed algorithm in terms of runtime, memory consumption, and number of generated patterns. PMID:25811038

An Incremental High-Utility Mining Algorithm with Transaction Insertion

Directory of Open Access Journals (Sweden)

Jerry Chun-Wei Lin

2015-01-01

Full Text Available Association-rule mining is commonly used to discover useful and meaningful patterns from a very large database. It only considers the occurrence frequencies of items to reveal the relationships among itemsets. Traditional association-rule mining is, however, not suitable in real-world applications since the purchased items from a customer may have various factors, such as profit or quantity. High-utility mining was designed to solve the limitations of association-rule mining by considering both the quantity and profit measures. Most algorithms of high-utility mining are designed to handle the static database. Fewer researches handle the dynamic high-utility mining with transaction insertion, thus requiring the computations of database rescan and combination explosion of pattern-growth mechanism. In this paper, an efficient incremental algorithm with transaction insertion is designed to reduce computations without candidate generation based on the utility-list structures. The enumeration tree and the relationships between 2-itemsets are also adopted in the proposed algorithm to speed up the computations. Several experiments are conducted to show the performance of the proposed algorithm in terms of runtime, memory consumption, and number of generated patterns.

Turmoil and transition: Electric utility industry trends

International Nuclear Information System (INIS)

1994-06-01

In a review of electric utility industry trends, focusing on North America, it is noted that four critical influences are dominant: competition in the electricity supply business; technological advances; the recognized need for environmental protection; and a favoring of market economics and customer choice. As energy costs rose in the 1970s and 1980s, electricity usage growth rates decreased and demand side management became an accepted alternative to building new power plants. In large areas of Canada and the USA, substantial surplus generation capacity arose, transmission linkages improved, and regional electricity markets developed. Privatization measures in the British electric sector were closely studied in North America and electric markets in the USA were pushed toward more competition with the 1992 Energy Policy Act. Non-utility generators have entered the market, including industrial companies, pipeline companies, independent renewable-energy providers, and power companies set up by the utilities themselves. Power pools may evolve into regional transmission grids in which the transmission owning utilities would exchange their lines for an interest in the grid. California is likely to lead in opening access to transmission on a regional scale. Distribution systems are likely to remain a regulated monopoly as before. Substantial change is expected in customer services as functions such as power purchase and conservation are being performed by independent companies. Other possible developments in the industry include emissions trading and spot markets for power. The implications of these trends for British Columbia Hydro are discussed

Enhancing the utilization of photovoltaic power generation by superconductive magnetic energy storage

International Nuclear Information System (INIS)

Tam, K.S.; Kumar, P.; Foreman, M.

1989-01-01

This paper demonstrates that a superconductive magnetic energy storage (SMES) system can enhance large scale utilization of PV generation. With SMES support, power generated from PV arrays van be fully utilized under different weather conditions and PV penetrations can be increased to significant levels without causing adverse effects to the power system. Coupled with PV generation, a SMES system is even more effective in performing diurnal load leveling. A coordinated PV/SMES operation scheme is proposed and demonstrated under different weather conditions

40 CFR 63.1451 - How do I demonstrate initial compliance with the emission limitations, work practice standards...

Science.gov (United States)

2010-07-01

... compliance status according to the requirements in § 63.1454(e). (f) Venturi wet scrubbers. For each venturi... compliance status that you will operate the venturi wet scrubber within the established operating limits for... baghouse or venturi wet scrubber subject to operating limits in § 63.1444(h) or § 63.1446(e), you have...

Utilization of water soluble plastics for radiological control within nuclear power plants

International Nuclear Information System (INIS)

Smith, R.J.; Deltete, C.P.; Homyk, W.A.; Kasprzak, L.; Robinson, P.J.

1989-01-01

The utilization of plastic products for radioactive contamination control within nuclear power facilities currently results in relatively large volumes of waste requiring disposal as low-level radioactive waste. The utilization of a polymer resin product that possesses comparable physical attributes to currently utilized plastic materials, but which is water soluble, has significant potential to reduce the volume of plastic waste requiring disposal as radwaste. Such a volume reduction will reduce overall plant )ampersand M costs, reduce the overall waste volume allocation utilization, and improve the regulatory perception of any plant realizing a volume reduction through plastic source minimization. This potential reduction in waste volume (and associated availability of the Low-level Waste Policy Amendments Act disposal allocation for other purposes), combined with potential economic benefits summarized above, has led to the undertaking of a detailed evaluation, presented in this paper

Water Utility Lime Sludge Reuse – An Environmental Sorbent ...

Science.gov (United States)

Lime sludge can be used as an environmental sorbent to remove sulfur dioxide (SO2) and acid gases, by the ultra-fine CaCO3 particles, and to sequester mercury and other heavy metals, by the Natural Organic Matter and residual activated carbon. The laboratory experimental set up included a simulated flue gas preparation unit, a lab-scale wet scrubber, and a mercury analyzer system. The influent mercury concentration was based on a range from 22 surveyed power plants. The reactivity of the lime sludge sample for acid neutralization was determined using a method similar to method ASTM C1318-95. Similar experiments were conducted using reagent calcium carbonate and calcium sulfate to obtain baseline data for comparing with the lime sludge test results. The project also evaluated the techno-economic feasibility and sustainable benefits of reusing lime softening sludge. If implemented on a large scale, this transformative approach for recycling waste materials from water treatment utilities at power generation utilities for environmental cleanup can save both water and power utilities millions of dollars. Huge amounts of lime sludge waste, generated from hundreds of water treatment utilities across the U.S., is currently disposed in landfills. This project evaluated a sustainable and economically-attractive approach to the use of lime sludge waste as a valuable resource for power generation utilities.

Factors affecting utilization of skilled maternal care in Northwest Ethiopia: a multilevel analysis

OpenAIRE

Worku, Abebaw Gebeyehu; Yalew, Alemayehu Worku; Afework, Mesganaw Fantahun

2013-01-01

Background The evaluation of all potential sources of low skilled maternal care utilization is crucial for Ethiopia. Previous studies have largely disregarded the contribution of different levels. This study was planned to assess the effect of individual, communal, and health facility characteristics in the utilization of antenatal, delivery, and postnatal care by a skilled provider. Methods A linked facility and population-based survey was conducted over three months (January - March 2012) i...

library use instruction and the pattern of utilization of library services ...

African Journals Online (AJOL)

Global Journal

The data collected was analysed using descriptive statistics (simple percentage %). ... semesters and it should be an independent credit carrying course under the General Studies ... large and well stocked a library is, if the ..... Online. LIBRARY USE INSTRUCTION AND THE PATTERN OF UTILIZATION OF LIBRARY ...

Utilization of health care services in rural and urban areas: a ...

African Journals Online (AJOL)

2014-06-02

Jun 2, 2014 ... and ability to pay are significant in predicting utilization behavior. The conceptual approach guiding the type of multivariate analysis enunciated above was originally developed by. Andersen and his associates.19, 20, 21. Characteristically, these studies dealt with large representative samples and.

Pilot-scale demonstration of the OSCAR process for high-temperature multipollutant control of coal combustion flue gas, using carbonated fly ash and mesoporous calcium carbonate

Energy Technology Data Exchange (ETDEWEB)

Gupta, H.; Thomas, T.J.; Park, A.H.A.; Iyer, M.V.; Gupta, P.; Agnihotri, R.; Jadhav, R.A.; Walker, H.W.; Weavers, L.K.; Butalia, T.; Fan, L.S. [Ohio State University, Columbus, OH (United States)

2007-07-15

A pilot-scale study of the Ohio State Carbonation Ash Reactivation (OSCAR) process was performed to demonstrate the reactivity of two novel calcium-based sorbents toward sulfur and trace heavy metal (arsenic, selenium, and mercury) capture in the furnace sorbent injection (FSI) mode on a 0.365 m{sup 3}/s slipstream of a bituminous coal-fired stoker boiler. The sorbents were synthesized by bubbling CO{sub 2} to precipitate calcium carbonate (a) from the unreacted calcium present in the lime spray dryer ash and (b) from calcium hydroxide slurry that contained a negatively charged dispersant. The heterogeneous reaction between these sorbents and SO{sub 2} gas occurred under entrained flow conditions by injecting fine sorbent powders into the flue gas slipstream. The reacted sorbents were captured either in a hot cyclone (about 650{sup o}C) or in the relatively cooler downstream baghouse (about 230{sup o}C). The baghouse samples indicated about 90% toward sulfation and captured arsenic, selenium and mercury to 800 ppmw, 175 ppmw and 3.6 ppmw, respectively.

High utility-itemset mining and privacy-preserving utility mining

Directory of Open Access Journals (Sweden)

Jerry Chun-Wei Lin

2016-03-01

Full Text Available In recent decades, high-utility itemset mining (HUIM has emerging a critical research topic since the quantity and profit factors are both concerned to mine the high-utility itemsets (HUIs. Generally, data mining is commonly used to discover interesting and useful knowledge from massive data. It may, however, lead to privacy threats if private or secure information (e.g., HUIs are published in the public place or misused. In this paper, we focus on the issues of HUIM and privacy-preserving utility mining (PPUM, and present two evolutionary algorithms to respectively mine HUIs and hide the sensitive high-utility itemsets in PPUM. Extensive experiments showed that the two proposed models for the applications of HUIM and PPUM can not only generate the high quality profitable itemsets according to the user-specified minimum utility threshold, but also enable the capability of privacy preserving for private or secure information (e.g., HUIs in real-word applications.

Transcriptional regulation of the carbohydrate utilization network in Thermotoga maritima

Directory of Open Access Journals (Sweden)

Dmitry A Rodionov

2013-08-01

Full Text Available Hyperthermophilic bacteria from the Thermotogales lineage can produce hydrogen by fermenting a wide range of carbohydrates. Previous experimental studies identified a large fraction of genes committed to carbohydrate degradation and utilization in the model bacterium Thermotoga maritima. Knowledge of these genes enabled comprehensive reconstruction of biochemical pathways comprising the carbohydrate utilization network. However, transcriptional factors (TFs and regulatory mechanisms driving this network remained largely unknown. Here, we used an integrated approach based on comparative analysis of genomic and transcriptomic data for the reconstruction of the carbohydrate utilization regulatory networks in 11 Thermotogales genomes. We identified DNA-binding motifs and regulons for 19 orthologous TFs in the Thermotogales. The inferred regulatory network in T. maritima contains 181 genes encoding TFs, sugar catabolic enzymes and ABC-family transporters. In contrast to many previously described bacteria, a transcriptional regulation strategy of Thermotoga does not employ global regulatory factors. The reconstructed regulatory network in T. maritima was validated by gene expression profiling on a panel of mono- and disaccharides and by in vitro DNA-binding assays. The observed upregulation of genes involved in catabolism of pectin, trehalose, cellobiose, arabinose, rhamnose, xylose, glucose, galactose, and ribose showed a strong correlation with the UxaR, TreR, BglR, CelR, AraR, RhaR, XylR, GluR, GalR, and RbsR regulons. Ultimately, this study elucidated the transcriptional regulatory network and mechanisms controlling expression of carbohydrate utilization genes in T. maritima. In addition to improving the functional annotations of associated transporters and catabolic enzymes, this research provides novel insights into the evolution of regulatory networks in Thermotogales.

Accessible light detection and ranging: estimating large tree density for habitat identification

Science.gov (United States)

Heather A. Kramer; Brandon M. Collins; Claire V. Gallagher; John Keane; Scott L. Stephens; Maggi Kelly

2016-01-01

Large trees are important to a wide variety of wildlife, including many species of conservation concern, such as the California spotted owl (Strix occidentalis occidentalis). Light detection and ranging (LiDAR) has been successfully utilized to identify the density of large-diameter trees, either by segmenting the LiDAR point cloud into...

Highly Scalable Trip Grouping for Large Scale Collective Transportation Systems

DEFF Research Database (Denmark)

Gidofalvi, Gyozo; Pedersen, Torben Bach; Risch, Tore

2008-01-01

Transportation-related problems, like road congestion, parking, and pollution, are increasing in most cities. In order to reduce traffic, recent work has proposed methods for vehicle sharing, for example for sharing cabs by grouping "closeby" cab requests and thus minimizing transportation cost...... and utilizing cab space. However, the methods published so far do not scale to large data volumes, which is necessary to facilitate large-scale collective transportation systems, e.g., ride-sharing systems for large cities. This paper presents highly scalable trip grouping algorithms, which generalize previous...

Tribal Utility Feasibility Study

Energy Technology Data Exchange (ETDEWEB)

Engel, R. A.; Zoellick, J. J.

2007-06-30

The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: • Demand-side management – This refers to efforts to reduce energy use through energy efficiency and conservation measures. • Off-grid, facility and household scale renewable energy systems – These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. • Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. • Medium to large scale renewable energy development for sale to the grid – In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be

Dynameomics: Data-driven methods and models for utilizing large-scale protein structure repositories for improving fragment-based loop prediction

Science.gov (United States)

Rysavy, Steven J; Beck, David AC; Daggett, Valerie

2014-01-01

Protein function is intimately linked to protein structure and dynamics yet experimentally determined structures frequently omit regions within a protein due to indeterminate data, which is often due protein dynamics. We propose that atomistic molecular dynamics simulations provide a diverse sampling of biologically relevant structures for these missing segments (and beyond) to improve structural modeling and structure prediction. Here we make use of the Dynameomics data warehouse, which contains simulations of representatives of essentially all known protein folds. We developed novel computational methods to efficiently identify, rank and retrieve small peptide structures, or fragments, from this database. We also created a novel data model to analyze and compare large repositories of structural data, such as contained within the Protein Data Bank and the Dynameomics data warehouse. Our evaluation compares these structural repositories for improving loop predictions and analyzes the utility of our methods and models. Using a standard set of loop structures, containing 510 loops, 30 for each loop length from 4 to 20 residues, we find that the inclusion of Dynameomics structures in fragment-based methods improves the quality of the loop predictions without being dependent on sequence homology. Depending on loop length, ∼25–75% of the best predictions came from the Dynameomics set, resulting in lower main chain root-mean-square deviations for all fragment lengths using the combined fragment library. We also provide specific cases where Dynameomics fragments provide better predictions for NMR loop structures than fragments from crystal structures. Online access to these fragment libraries is available at http://www.dynameomics.org/fragments. PMID:25142412

Dynameomics: data-driven methods and models for utilizing large-scale protein structure repositories for improving fragment-based loop prediction.

Science.gov (United States)

Rysavy, Steven J; Beck, David A C; Daggett, Valerie

2014-11-01

Protein function is intimately linked to protein structure and dynamics yet experimentally determined structures frequently omit regions within a protein due to indeterminate data, which is often due protein dynamics. We propose that atomistic molecular dynamics simulations provide a diverse sampling of biologically relevant structures for these missing segments (and beyond) to improve structural modeling and structure prediction. Here we make use of the Dynameomics data warehouse, which contains simulations of representatives of essentially all known protein folds. We developed novel computational methods to efficiently identify, rank and retrieve small peptide structures, or fragments, from this database. We also created a novel data model to analyze and compare large repositories of structural data, such as contained within the Protein Data Bank and the Dynameomics data warehouse. Our evaluation compares these structural repositories for improving loop predictions and analyzes the utility of our methods and models. Using a standard set of loop structures, containing 510 loops, 30 for each loop length from 4 to 20 residues, we find that the inclusion of Dynameomics structures in fragment-based methods improves the quality of the loop predictions without being dependent on sequence homology. Depending on loop length, ∼ 25-75% of the best predictions came from the Dynameomics set, resulting in lower main chain root-mean-square deviations for all fragment lengths using the combined fragment library. We also provide specific cases where Dynameomics fragments provide better predictions for NMR loop structures than fragments from crystal structures. Online access to these fragment libraries is available at http://www.dynameomics.org/fragments. © 2014 The Protein Society.

Parallel Index and Query for Large Scale Data Analysis

Energy Technology Data Exchange (ETDEWEB)

Chou, Jerry; Wu, Kesheng; Ruebel, Oliver; Howison, Mark; Qiang, Ji; Prabhat,; Austin, Brian; Bethel, E. Wes; Ryne, Rob D.; Shoshani, Arie

2011-07-18

Modern scientific datasets present numerous data management and analysis challenges. State-of-the-art index and query technologies are critical for facilitating interactive exploration of large datasets, but numerous challenges remain in terms of designing a system for process- ing general scientific datasets. The system needs to be able to run on distributed multi-core platforms, efficiently utilize underlying I/O infrastructure, and scale to massive datasets. We present FastQuery, a novel software framework that address these challenges. FastQuery utilizes a state-of-the-art index and query technology (FastBit) and is designed to process mas- sive datasets on modern supercomputing platforms. We apply FastQuery to processing of a massive 50TB dataset generated by a large scale accelerator modeling code. We demonstrate the scalability of the tool to 11,520 cores. Motivated by the scientific need to search for inter- esting particles in this dataset, we use our framework to reduce search time from hours to tens of seconds.

Large Coil Program magnetic system design study

International Nuclear Information System (INIS)

Moses, S.D.; Johnson, N.E.

1977-01-01

The primary objective of the Large Coil Program (LCP) is to demonstrate the reliable operation of large superconducting coils to provide a basis for the design principles, materials, and fabrication techniques proposed for the toroidal magnets for the THE NEXT STEP (TNS) and other future tokamak devices. This paper documents a design study of the Large Coil Test Facility (LCTF) in which the structural response of the Toroidal Field (TF) Coils and the supporting structure was evaluated under simulated reactor conditions. The LCP test facility structural system consists of six TF Coils, twelve coil-to-coil torsional restraining beams (torque rings), a central bucking post with base, and a Pulse Coil system. The NASTRAN Finite Element Structural Analysis computer Code was utilized to determine the distribution of deflections, forces, and stresses for each of the TF Coils, torque rings, and the central bucking post. Eleven load conditions were selected to represent probable test operations. Pulse Coils suspended in the bore of the test coil were energized to simulate the pulsed field environment characteristic of the TNS reactor system. The TORMAC Computer Code was utilized to develop the magnetic forces in the TF Coils for each of the eleven loading conditions examined, with or without the Pulse Coils energized. The TORMAC computer program output forces were used directly as input load conditions for the NASTRAN analyses. Results are presented which demonstrate the reliability of the LCTF under simulated reactor operating conditions

A Web-based Distributed Voluntary Computing Platform for Large Scale Hydrological Computations

Science.gov (United States)

Demir, I.; Agliamzanov, R.

2014-12-01

Distributed volunteer computing can enable researchers and scientist to form large parallel computing environments to utilize the computing power of the millions of computers on the Internet, and use them towards running large scale environmental simulations and models to serve the common good of local communities and the world. Recent developments in web technologies and standards allow client-side scripting languages to run at speeds close to native application, and utilize the power of Graphics Processing Units (GPU). Using a client-side scripting language like JavaScript, we have developed an open distributed computing framework that makes it easy for researchers to write their own hydrologic models, and run them on volunteer computers. Users will easily enable their websites for visitors to volunteer sharing their computer resources to contribute running advanced hydrological models and simulations. Using a web-based system allows users to start volunteering their computational resources within seconds without installing any software. The framework distributes the model simulation to thousands of nodes in small spatial and computational sizes. A relational database system is utilized for managing data connections and queue management for the distributed computing nodes. In this paper, we present a web-based distributed volunteer computing platform to enable large scale hydrological simulations and model runs in an open and integrated environment.

Economics of carbon dioxide capture and utilization-a supply and demand perspective.

Science.gov (United States)

Naims, Henriette

2016-11-01

Lately, the technical research on carbon dioxide capture and utilization (CCU) has achieved important breakthroughs. While single CO 2 -based innovations are entering the markets, the possible economic effects of a large-scale CO 2 utilization still remain unclear to policy makers and the public. Hence, this paper reviews the literature on CCU and provides insights on the motivations and potential of making use of recovered CO 2 emissions as a commodity in the industrial production of materials and fuels. By analyzing data on current global CO 2 supply from industrial sources, best practice benchmark capture costs and the demand potential of CO 2 utilization and storage scenarios with comparative statics, conclusions can be drawn on the role of different CO 2 sources. For near-term scenarios the demand for the commodity CO 2 can be covered from industrial processes, that emit CO 2 at a high purity and low benchmark capture cost of approximately 33 €/t. In the long-term, with synthetic fuel production and large-scale CO 2 utilization, CO 2 is likely to be available from a variety of processes at benchmark costs of approx. 65 €/t. Even if fossil-fired power generation is phased out, the CO 2 emissions of current industrial processes would suffice for ambitious CCU demand scenarios. At current economic conditions, the business case for CO 2 utilization is technology specific and depends on whether efficiency gains or substitution of volatile priced raw materials can be achieved. Overall, it is argued that CCU should be advanced complementary to mitigation technologies and can unfold its potential in creating local circular economy solutions.

Multiattribute Utility Theory, Intertemporal Utility and Correlation Aversion

DEFF Research Database (Denmark)

Andersen, Steffen; Harrison, Glenn W.; Lau, Morten

2018-01-01

Convenient assumptions about qualitative properties of the intertemporal utility function have generated counterintuitive implications for the relationship between atemporal risk aversion and the intertemporal elasticity of substitution. If the intertemporal utility function is additively separable...... aversion. Our results show that subjects are correlation averse over lotteries with intertemporal income profiles....

Coal comprehensive utilization is the gateway for Shanxi Province

International Nuclear Information System (INIS)

Ma, L.; Gui, G.

1997-01-01

Shanxi Province is abundant in coal reserve. Taiyuan Coal Gasification Corporation is a large sized union enterprise engaged in comprehensive use of coal in Shanxi province, and significant economic, social, environmental benefits have been brought forth with it. This leads people to believe that coal comprehensive utilization is the gateway for Shanxi Province in the fields of improvement of environment and development of economy

Present status of radiation utilization in Thailand

International Nuclear Information System (INIS)

Chongkum, S.

1994-01-01

Present development of radiation utilization in Thailand covers two main areas, i.e. (1) production and utilization of radioisotopes and (2) radiation processing and technology. Radioisotope production from 2 megawatts Thai Research Reactor (TRR1/M1) is being studied, directed toward expanding the varieties of radioisotopes, improvement of quality, and technological development on quantity producing to meet the total national needs. However a large amount of radioisotopes is also imported mainly for industrial and medical applications. Radioisotopes and radiations are utilized in nuclear medicine for diagnosis and therapy from 30 hospitals and institutions. X-ray photographing, X-ray computer tomography and others are typical use for medical examination purposes, while Co-60 gamma rays and electron beam are in used for curing. Since 1972, Thailand has been participated to the IAEA/RCA Industrial Project, through the liaison of the Office of Atomic Energy for Peace (OAEP), and increases the awareness of industry to the economic benefits through the uses of nuclear technology. More than 60 companies are using radioisotopes for gauging, examination purposes and production controls, while these radioisotopes are mostly imported. Nuclear techniques in agriculture are addressed concerns with optimizing fertilizer application, determination soil-water-nitrogen fixation relationships, improving animal health and reproduction, measurement of toxic residues, appropriated food preservation techniques and breeding plant for better yield and disease resistance. The eradication of fruit flies by Sterile Insect Technique (SIT) with gamma rays has been successfully applied in northern and middle part of Thailand. The progress and present status of radiation utilization and processing in Thailand will be introduced. (author)

Utilization of MVP for research on fast reactor

International Nuclear Information System (INIS)

Yokoyama, Kenji

2001-01-01

Utilization of the continuous energy Monte-Carlo code, MVP, for research on fast reactor in Power Reactor and Nuclear Fuel Development Corporation(PNC) is described. In this report, three types of utilization are reviewed; (1) a comparison of the eigenvalues calculated by MVP with the results by the deterministic methods, (2) an improvement of U-238 reaction rate evaluation in JUPITER experimental Analysis and (3) an evaluation of heterogeneity effects for Am reaction rates of the moderated subassemblies. Since the results of MVP can be used as references, MVP is very useful code in research on fast reactor. It is one of indispensable tools in order to verify the models in the deterministic methods. Furthermore, it can be used so as to investigate the new concept reactors, such as a reactor aiming to transmute minor actinides(MA). On the other hand, a problem of the variance reduction remains. Especially, a small reactivity cannot be estimated by MVP because of large variances. The development of a Monte-Carlo method for a small reactivity calculation will promote the utilization of MVP for research on fast reactor. (author)

Quantification and Classification of E. coli Proteome Utilization and Unused Protein Costs across Environments.

Directory of Open Access Journals (Sweden)

Edward J O'Brien

2016-06-01

Full Text Available The costs and benefits of protein expression are balanced through evolution. Expression of un-utilized protein (that have no benefits in the current environment incurs a quantifiable fitness costs on cellular growth rates; however, the magnitude and variability of un-utilized protein expression in natural settings is unknown, largely due to the challenge in determining environment-specific proteome utilization. We address this challenge using absolute and global proteomics data combined with a recently developed genome-scale model of Escherichia coli that computes the environment-specific cost and utility of the proteome on a per gene basis. We show that nearly half of the proteome mass is unused in certain environments and accounting for the cost of this unused protein expression explains >95% of the variance in growth rates of Escherichia coli across 16 distinct environments. Furthermore, reduction in unused protein expression is shown to be a common mechanism to increase cellular growth rates in adaptive evolution experiments. Classification of the unused protein reveals that the unused protein encodes several nutrient- and stress- preparedness functions, which may convey fitness benefits in varying environments. Thus, unused protein expression is the source of large and pervasive fitness costs that may provide the benefit of hedging against environmental change.

Utilities for developing HITAC 10-2 program with U-400 and M-190 systems

International Nuclear Information System (INIS)

Tsuda, Kenzo.

1979-06-01

At the time of developing ''On-line experimental data processing system for JIPP (Japan Institute of Plasma Physics) T-2'', a number of utilities have been developed, which can develop the programs on the HITAC 10-2 side through the PANAFACOM U-400 and the FACOM M-190 computer systems. The HITAC 10-2 is a computer mainly composed of core memories, whose performances of processing speed, peripherals and softwares are considerably different from large and medium size computers. For this reason, it requires tremendous time and labor to develop large scale programs or systems by utilizing only the HITAC 10-2. Accordingly, some utilities have been developed with the U-400 and M-190 systems in order to shorten the developing time and improve the developing efficiency. In the example of above ''On-line experimental data processing system for JIPP T-2'', the time required for one debugging can be reduced to 20 minutes from former 5 to 6 hours. In this report, first, the program development by the HITAC 10-2, and next, the bind processing with U-400 and the cross-assembling with M-190 are described. Then the functions and the method for use of the utilities are explained. (Wakatsuki, Y.)

Indirect Measurement of Energy Density of Soft PZT Ceramic Utilizing Mechanical Stress

Science.gov (United States)

Unruan, Muangjai; Unruan, Sujitra; Inkong, Yutthapong; Yimnirun, Rattikorn

2017-11-01

This paper reports on an indirect measurement of energy density of soft PZT ceramic utilizing mechanical stress. The method works analogous to the Olsen cycle and allows for a large amount of electro-mechanical energy conversion. A maximum energy density of 350 kJ/m3/cycle was found under 0-312 MPa and 1-20 kV/cm of applied mechanical stress and electric field, respectively. The obtained result is substantially higher than the results reported in previous studies of PZT materials utilizing a direct piezoelectric effect.

Application-oriented research on plasma channeling of a large pulsed current

International Nuclear Information System (INIS)

Liu Jingye

2000-01-01

Utilizing the avalanche effect of plasma produced by the collision of energetic primary electrons with hydrogen molecules in a plasma, channeling of a large pulsed current is achieved, with the plasma acting as the carrier

The predictive validity of prospect theory versus expected utility in health utility measurement.

Science.gov (United States)

Abellan-Perpiñan, Jose Maria; Bleichrodt, Han; Pinto-Prades, Jose Luis

2009-12-01

Most health care evaluations today still assume expected utility even though the descriptive deficiencies of expected utility are well known. Prospect theory is the dominant descriptive alternative for expected utility. This paper tests whether prospect theory leads to better health evaluations than expected utility. The approach is purely descriptive: we explore how simple measurements together with prospect theory and expected utility predict choices and rankings between more complex stimuli. For decisions involving risk prospect theory is significantly more consistent with rankings and choices than expected utility. This conclusion no longer holds when we use prospect theory utilities and expected utilities to predict intertemporal decisions. The latter finding cautions against the common assumption in health economics that health state utilities are transferable across decision contexts. Our results suggest that the standard gamble and algorithms based on, should not be used to value health.

Optimization of FTA technology for large scale plant DNA isolation ...

African Journals Online (AJOL)

Conventional methods for DNA acquisition and storage require expensive reagents and equipments. Experimental fields located in remote areas and large sample size presents greater challenge to developing country institutions constrained financially. FTATM technology uses a single format utilizing basic tools found in ...

High Power Microwave Emission of Large and Small Orbit Gyrotron Devices in Rectangular Interaction Structures

Science.gov (United States)

Hochman, J. M.; Gilgenbach, R. M.; Jaynes, R. L.; Rintamaki, J. I.; Luginsland, J. W.; Lau, Y. Y.; Spencer, T. A.

1996-11-01

Experiments utilize large and small orbit e-beam gyrotron devices in a rectangular-cross-section (RCS) gyrotron. This device is being explored to examine polarization control. Other research issues include pulse shortening, and mode competition. MELBA generates electron beams with parameters of: -800kV, 1-10kA diode current, and 0.5-1.0 μ sec pulselengths. The small orbit gyrotron device is converted to a large orbit experiment by running MELBA's annular electron beam through a magnetic cusp. Initial experiments showed an increase in beam alpha (V_perp/V_par) of a factor of ~ 4 between small and large orbit devices. Experimental results from the RCS gyrotron will be compared for large-orbit and small-orbit electron beams. Beam transport data and frequency measurements will be presented. Computer modeling utilizing the MAGIC and E-gun codes will be shown.

Estimating Utility

DEFF Research Database (Denmark)

Arndt, Channing; Simler, Kenneth R.

2010-01-01

A fundamental premise of absolute poverty lines is that they represent the same level of utility through time and space. Disturbingly, a series of recent studies in middle- and low-income economies show that even carefully derived poverty lines rarely satisfy this premise. This article proposes a......, with the current approach tending to systematically overestimate (underestimate) poverty in urban (rural) zones.......A fundamental premise of absolute poverty lines is that they represent the same level of utility through time and space. Disturbingly, a series of recent studies in middle- and low-income economies show that even carefully derived poverty lines rarely satisfy this premise. This article proposes...... an information-theoretic approach to estimating cost-of-basic-needs (CBN) poverty lines that are utility consistent. Applications to date illustrate that utility-consistent poverty measurements derived from the proposed approach and those derived from current CBN best practices often differ substantially...

Gnuastro: GNU Astronomy Utilities

Science.gov (United States)

Akhlaghi, Mohammad

2018-01-01

Gnuastro (GNU Astronomy Utilities) manipulates and analyzes astronomical data. It is an official GNU package of a large collection of programs and C/C++ library functions. Command-line programs perform arithmetic operations on images, convert FITS images to common types like JPG or PDF, convolve an image with a given kernel or matching of kernels, perform cosmological calculations, crop parts of large images (possibly in multiple files), manipulate FITS extensions and keywords, and perform statistical operations. In addition, it contains programs to make catalogs from detection maps, add noise, make mock profiles with a variety of radial functions using monte-carlo integration for their centers, match catalogs, and detect objects in an image among many other operations. The command-line programs share the same basic command-line user interface for the comfort of both the users and developers. Gnuastro is written to comply fully with the GNU coding standards and integrates well with all Unix-like operating systems. This enables astronomers to expect a fully familiar experience in the source code, building, installing and command-line user interaction that they have seen in all the other GNU software that they use. Gnuastro's extensive library is included for users who want to build their own unique programs.

Joint studies on large CANDU

International Nuclear Information System (INIS)

Lee, Ikhwan; Yu, S. K. W.

1994-01-01

from economic, safety and strategic viewpoints. A large number of research and development programs are now in place at AECL and KAERI that will permit substantial improvements to be realized in the next generation of CANDU okabts, Furthermore, opportunities exist for engineered improvements based on the research and development in advancing the generic CANDU Technology. Final Large CANDU joint study report with technical deliverables will be issued 1994 October. Phase 2 R and D program of the joint studies will be determined this year and implemented in next year. CANDU neutron economy permits versatility in choices of fuel cycles. This allows a utility to choose fuel cycle options for lower fuelling cost, better security of supply, and ultimately for much lower spent-fuel volume, than with PWR's alone. To meet Korea's strategic requirements, CANDU should be an integral part of the electricity supply mix.

Development of radiation utilization for economic growth in China

International Nuclear Information System (INIS)

Lu Yanxiao

1994-01-01

The program of radiation utilization in China was initiated with the development of nuclear industry in the late 1950s. From then on, the establishment of relatively comprehensive nuclear industrial system and a fair number of talent technical personnel have laid the foundation for radiation utilization in industry, agriculture, medicine and so on. Radioisotopes and radiation become one of the most effective means for acquiring data and information and changing material properties in modern techniques. They are, in many respects, unique and cannot replaced by other techniques. In recent years the considerable progress in the development, commercialization and large-scale utilization of radioisotopes and radiation has been creating economic and social benefits for Chinese modernization. The applications in agriculture have mainly embodied in mutation breeding of crops and so on through radiation or in combination with other methods to provide excellent mutant varieties. The important applications in medicine are the medical diagnosis with radioimmunoassay (RIA) and radiopharmaceutical imaging, and cancer therapy with radioisotopes and electron beam. Well-established methods have bee offered for routine clinic applications to help to heal the patients and rescue the lives. The industrial applications are of key importance in economic growth in China. In fact, radiation processing and nucleonic control systems (NCS) for industrial utilization are very useful to technological transformation of Chinese traditional industries. The radiation utilization in industries can be emerging as new high-tech industries. A fuller exploitation of radiation utilization is expected to meet the requirements of high growth of national economy and to bridge the gap between China and the developed countries in the world in nuclear application. (author)

Development of radiation utilization for economic growth in China

Energy Technology Data Exchange (ETDEWEB)

Yanxiao, Lu [China Nuclear Information Center, Beijing, BJ (China)

1994-01-01

The program of radiation utilization in China was initiated with the development of nuclear industry in the late 1950s. From then on, the establishment of relatively comprehensive nuclear industrial system and a fair number of talent technical personnel have laid the foundation for radiation utilization in industry, agriculture, medicine and so on. Radioisotopes and radiation become one of the most effective means for acquiring data and information and changing material properties in modern techniques. They are, in many respects, unique and cannot replaced by other techniques. In recent years the considerable progress in the development, commercialization and large-scale utilization of radioisotopes and radiation has been creating economic and social benefits for Chinese modernization. The applications in agriculture have mainly embodied in mutation breeding of crops and so on through radiation or in combination with other methods to provide excellent mutant varieties. The important applications in medicine are the medical diagnosis with radioimmunoassay (RIA) and radiopharmaceutical imaging, and cancer therapy with radioisotopes and electron beam. Well-established methods have bee offered for routine clinic applications to help to heal the patients and rescue the lives. The industrial applications are of key importance in economic growth in China. In fact, radiation processing and nucleonic control systems (NCS) for industrial utilization are very useful to technological transformation of Chinese traditional industries. The radiation utilization in industries can be emerging as new high-tech industries. A fuller exploitation of radiation utilization is expected to meet the requirements of high growth of national economy and to bridge the gap between China and the developed countries in the world in nuclear application. (author).

Origine et developpement des industries de la langue (Origin and Development of Language Utilities). Publication K-8.

Science.gov (United States)

L'Homme, Marie-Claude

The evolution of "language utilities," a concept confined largely to the francophone world and relating to the uses of language in computer science and the use of computer science for languages, is chronicled. The language utilities are of three types: (1) tools for language development, primarily dictionary databases and related tools;…

Elevated temperature and high pressure large helium gas loop

International Nuclear Information System (INIS)

Sakasai, Minoru; Midoriyama, Shigeru; Miyata, Toyohiko; Nakase, Tsuyoshi; Izaki, Makoto

1979-01-01

The development of high temperature gas-cooled reactors especially aiming at the multi-purpose utilization of nuclear heat energy is carried out actively in Japan and West Germany. In Japan, the experimental HTGR of 50 MWt and 1000 deg C outlet temperature is being developed by Japan Atomic Energy Research Institute and others since 1969, and the development of direct iron-making technology utilizing high temperature reducing gas was started in 1973 as the large project of Ministry of Internalional Trade and Industry. Kawasaki Heavy Industries, Ltd., Has taken part in these development projects, and has developed many softwares for nuclear heat design, system design and safety design of nuclear reactor system and heat utilization system. In hardwares also, efforts have been exerted to develop the technologies of design and manufacture of high temperature machinery and equipments. The high temperature, high pressure, large helium gas loop is under construction in the technical research institute of the company, and it is expected to be completed in December, 1979. The tests planned are that of proving the dynamic performances of the loop and its machinery and equipments and the verification of analysis codes. The loop is composed of the main circulation system, the objects of testing, the helium gas purifying system, the helium supplying and evacuating system, instruments and others. (Kako, I.)

The changing utility workforce and the evolution of utility design

Energy Technology Data Exchange (ETDEWEB)

Saunders, A. [Autodesk Inc., (United States); Zeiss, G. [Autodesk Inc., (Canada)

2008-07-01

Electric utilities are experiencing an unprecedented workforce turnover as a wave of retirement approaches. The challenge for the industry is to mitigate the loss of industry knowledge and attract talented new designers and engineers. Utilities need to effectively transfer knowledge from an existing workforce with up to three decades of experience to their new hires who have very different skill levels as well as different expectations regarding design tools compared to their predecessors. Knowledge transfer from the retiring workforce to the new hires can be facilitated with rules-based design software. Easy-to-use design software with built-in validations can accelerate training. By investing in utility design software that incorporates the best elements of design processes from other industries, utilities can attract the new generation of engineers and designers to help utilities define new processes to upgrade existing infrastructure, bring online new distributed and renewable generation facilities, implement smart devices and meters, and improve customer service. 3 refs.

NON-EXPECTED UTILITY THEORIES: WEIGHTED EXPECTED, RANK DEPENDENT, AND CUMULATIVE PROSPECT THEORY UTILITY

OpenAIRE

Tuthill, Jonathan W.; Frechette, Darren L.

2002-01-01

This paper discusses some of the failings of expected utility including the Allais paradox and expected utility's inadequate one dimensional characterization of risk. Three alternatives to expected utility are discussed at length; weighted expected utility, rank dependent utility, and cumulative prospect theory. Each alternative is capable of explaining Allais paradox type problems and permits more sophisticated multi dimensional risk preferences.

A scanning probe microscope for magnetoresistive cantilevers utilizing a nested scanner design for large-area scans

Directory of Open Access Journals (Sweden)

Tobias Meier

2015-02-01

Full Text Available We describe an atomic force microscope (AFM for the characterization of self-sensing tunneling magnetoresistive (TMR cantilevers. Furthermore, we achieve a large scan-range with a nested scanner design of two independent piezo scanners: a small high resolution scanner with a scan range of 5 × 5 × 5 μm3 is mounted on a large-area scanner with a scan range of 800 × 800 × 35 μm3. In order to characterize TMR sensors on AFM cantilevers as deflection sensors, the AFM is equipped with a laser beam deflection setup to measure the deflection of the cantilevers independently. The instrument is based on a commercial AFM controller and capable to perform large-area scanning directly without stitching of images. Images obtained on different samples such as calibration standard, optical grating, EPROM chip, self-assembled monolayers and atomic step-edges of gold demonstrate the high stability of the nested scanner design and the performance of self-sensing TMR cantilevers.

Concepts for Large Scale Hydrogen Production

OpenAIRE

Jakobsen, Daniel; Åtland, Vegar

2016-01-01

The objective of this thesis is to perform a techno-economic analysis of large-scale, carbon-lean hydrogen production in Norway, in order to evaluate various production methods and estimate a breakeven price level. Norway possesses vast energy resources and the export of oil and gas is vital to the country s economy. The results of this thesis indicate that hydrogen represents a viable, carbon-lean opportunity to utilize these resources, which can prove key in the future of Norwegian energy e...

Development of the electric utility dispersed use PAFC stack

Energy Technology Data Exchange (ETDEWEB)

Horiuchi, Hiroshi; Kotani, Ikuo [Mitsubishi Electric Co., Kobe (Japan); Morotomi, Isamu [Kansai Electric Power Co., Hyogo (Japan)] [and others

1996-12-31

Kansai Electric Power Co. and Mitsubishi Electric Co. have been developing the electric utility dispersed use PAFC stack operated under the ambient pressure. The new cell design have been developed, so that the large scale cell (1 m{sup 2} size) was adopted for the stack. To confirm the performance and the stability of the 1 m{sup 2} scale cell design, the short stack study had been performed.

Healthcare Utilization and Costs of Systemic Lupus Erythematosus in Medicaid

Directory of Open Access Journals (Sweden)

Hong J. Kan

2013-01-01

Full Text Available Objective. Healthcare utilization and costs associated with systemic lupus erythematosus (SLE in a US Medicaid population were examined. Methods. Patients ≥ 18 years old with SLE diagnosis (ICD-9-CM 710.0x were extracted from a large Medicaid database 2002–2009. Index date was date of the first SLE diagnosis. Patients with and without SLE were matched. All patients had a variable length of followup with a minimum of 12 months. Annualized healthcare utilization and costs associated with SLE and costs of SLE flares were assessed during the followup period. Multivariate regressions were conducted to estimate incremental healthcare utilization and costs associated with SLE. Results. A total of 14,777 SLE patients met the study criteria, and 14,262 were matched to non-SLE patients. SLE patients had significantly higher healthcare utilization per year than their matched controls. The estimated incremental annual cost associated with SLE was $10,984, with the highest increase in inpatient costs (P<0.001. Cost per flare was $11,716 for severe flares, $562 for moderate flares, and $129 for mild flares. Annual total costs for patients with severe flares were $49,754. Conclusions. SLE patients had significantly higher healthcare resource utilization and costs than non-SLE patients. Patients with severe flares had the highest costs.

Carbon nanofiber supercapacitors with large areal capacitances

KAUST Repository

McDonough, James R.

2009-01-01

We develop supercapacitor (SC) devices with large per-area capacitances by utilizing three-dimensional (3D) porous substrates. Carbon nanofibers (CNFs) functioning as active SC electrodes are grown on 3D nickel foam. The 3D porous substrates facilitate a mass loading of active electrodes and per-area capacitance as large as 60 mg/ cm2 and 1.2 F/ cm2, respectively. We optimize SC performance by developing an annealing-free CNF growth process that minimizes undesirable nickel carbide formation. Superior per-area capacitances described here suggest that 3D porous substrates are useful in various energy storage devices in which per-area performance is critical. © 2009 American Institute of Physics.

Impact of power purchases from non-utilities on the utility cost of capital

International Nuclear Information System (INIS)

Kahn, E.; Stoft, S.; Belden, T.

1995-01-01

The bond rating agencies in the USA have asserted that long-term power purchase contracts between non-utility generators and utilities are the equivalent of debt to the utilities, and therefore raise the cost of capital to the purchaser. Non-Utility generators claim that these contracts reduce risk to the utilities. This debate is reflected in the 1992 Energy Policy Act. This paper investigates this controversy from the perspective of the equity markets. Using a CAPM framework, various specifications of the cost of equity capital are estimated, to shed light on this question. No evidence is found for the hypothesis that non-utility generation contracts raise the cost of capital. There does appear to be a slight increase in this cost for those utilities seeking to build their own generation capacity as opposed to purchasing it from non-utility suppliers. (author)

浅谈提高大型仪器设备使用效率的措施%Discussion on improving utilization efficiency of large instruments and equipment

Institute of Scientific and Technical Information of China (English)

吴冰; 张勇

2011-01-01

大型仪器设备在高校学科建设中起着重要的支撑作用,高校对仪器设备的投人逐年增加,本文从提高机时利用率、管理人员素质和健全管理制度等方面探讨了提高大型仪器设备使用效率的措施.%Large instruments and equipment play an important supporting role in the building of academic disciplines in colleges and universities, and funds apropriated for their purchase and operation are increasing each year. This paper discusses the methods to improve the utilization efficiency of these instruments through improving the quality of management staff and administration system and increasing the usage factor.

Criteria for inhalation exposure systems utilizing concurrent flow spirometry

International Nuclear Information System (INIS)

Raabe, O.G.; Yeh, H.C.

1974-01-01

Principles are given for the design and operation of a new class of inhalation exposure systems utilizing concurrent flow spirometry (CFS), a simple method for providing realtime measurement of respiratory volumes and rates during inhalation exposure by mouth or nose of individual experimental animals or man to aerosols or gases. This technique is especially useful for inhalation exposure of larger experimental animals, such as horses, where whole-body plethysmography is usually impractical. Difficulties encountered with conventional exposure systems in maintenance of uniform aerosol or gas concentrations and prevention of large pressure excursions in the exposure chamber during breathing are obviated by systems utilizing the principles of concurrent flow spirometry. For illustration, two exposure units with CFS are described, one for exposure of Beagle dogs and one for ponies. (U.S.)

Utilization of protein-rich residues in biotechnological processes.

Science.gov (United States)

Pleissner, Daniel; Venus, Joachim

2016-03-01

A drawback of biotechnological processes, where microorganisms convert biomass constituents, such as starch, cellulose, hemicelluloses, lipids, and proteins, into wanted products, is the economic feasibility. Particularly the cost of nitrogen sources in biotechnological processes can make up a large fraction of total process expenses. To further develop the bioeconomy, it is of considerable interest to substitute cost-intensive by inexpensive nitrogen sources. The aim of this mini-review was to provide a comprehensive insight of utilization methods of protein-rich residues, such as fish waste, green biomass, hairs, and food waste. The methods described include (i) production of enzymes, (ii) recovery of bioactive compounds, and/or (iii) usage as nitrogen source for microorganisms in biotechnological processes. In this aspect, the utilization of protein-rich residues, which are conventionally considered as waste, allows the development of value-adding processes for the production of bioactive compounds, biomolecules, chemicals, and materials.

Consideration of environmental externality costs in electric utility resource selections and regulation

International Nuclear Information System (INIS)

Ottinger, R.L.

1990-01-01

A surprising number of state electric utility regulatory commissions (half) have started to require consideration of environmental externality costs in utility planning and resource selection. The principal rationale for doing so is that electric utility operations impose very real and large damages to human health and the environment which are not taken into account by traditional utility least cost planning, resource selection procedures, or by government pollution regulation. These failures effectively value the residual environmental costs to society of utility operations at zero. The likely future prospect for more stringent governmental pollution regulation renders imprudent the selection of resources without taking environmental externality costs into consideration. Most regulatory commissions requiring environmental externality consideration have left it to the utilities to compute the societal costs, although a few have either set those costs themselves or used a proxy adder to polluting resource costs (or bonus for non-polluting resources). These commissions have used control or pollution mitigation costs, rather than societal damage costs, in their regulatory computations. This paper recommends that damage costs be used where adequate studies exist to permit quantification, discusses the methodologies for their measurement, and describes the means that have been and might be used for their incorporation

Resource utilization for observation-status stays at children's hospitals.

Science.gov (United States)

Fieldston, Evan S; Shah, Samir S; Hall, Matthew; Hain, Paul D; Alpern, Elizabeth R; Del Beccaro, Mark A; Harding, John; Macy, Michelle L

2013-06-01

Observation status, in contrast to inpatient status, is a billing designation for hospital payment. Observation-status stays are presumed to be shorter and less resource-intensive, but utilization for pediatric observation-status stays has not been studied. The goal of this study was to describe resource utilization characteristics for patients in observation and inpatient status in a national cohort of hospitalized children in the Pediatric Health Information System. This study was a retrospective cohort from 2010 of observation- and inpatient-status stays of ≤2 days; all children were admitted from the emergency department. Costs were analyzed and described. Comparison between costs adjusting for age, severity, and length of stay were conducted by using random-effect mixed models to account for clustering of patients within hospitals. Observation status was assigned to 67 230 (33.3%) discharges, but its use varied across hospitals (2%-45%). Observation-status stays had total median costs of $2559, including room costs and $678 excluding room costs. Twenty-five diagnoses accounted for 74% of stays in observation status, 4 of which were used for detailed analyses: asthma (n = 6352), viral gastroenteritis (n = 4043), bronchiolitis (n = 3537), and seizure (n = 3289). On average, after risk adjustment, observation-status stays cost $260 less than inpatient-status stays for these select 4 diagnoses. Large overlaps in costs were demonstrated for both types of stay. Variability in use of observation status with large overlap in costs and potential lower reimbursement compared with inpatient status calls into question the utility of segmenting patients according to billing status and highlights a financial risk for institutions with a high volume of pediatric patients in observation status.

Impact on a utility, utility customers and the environment of an ensemble of solar domestic hot water systems

International Nuclear Information System (INIS)

Cragan, K.E.; Klein, S.A.; Beckman, W.A.

1995-01-01

The benefits of the installation of a large number of solar domestic hot water (SDHW) systems are identified and quantified. The benefits of SDHW systems include reduced energy use, reduced electrical demand, and reduced pollution. The avoided emissions, capacity contribution, energy and demand savings were evaluated using the power generation schedules, emissions data and annual hourly load profiles from a Wisconsin utility. It is shown that each six square meter solar water heater system can save annually: 3,560 kWh of energy, 0.66 kW of peak demand, and over four tons of pollution

Utility and performance relative to consumer product energy efficiency standards. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Coggins, J.L.

1979-12-14

An investigation of the relative utility and performance of nine major household consumer products covered by the Energy Policy and Conservation Act is summarized. The objective was to define the terms utility and performance, to recommend methods for quantifying these two concepts, and to recommend an approach for dealing with utility and performance issues in the energy efficiency standards program. The definitions developed are: performance of a consumer product is the objective measure of how well, with the expected level of consumer input (following the manufacturer's instructions for installation and operation), the product does its intended job; and utility of a consumer product is a subjective measure, based on the consumer's perception, of the capability of the product to satisfy human needs. Quantification is based on test procedures and consumer survey methods which are largely already in use by industry. Utility and performance issues are important in product classification for prescribing energy efficiency standards. The recommended approach to utility and performance issues and classification is: prior to setting standards, evaluate utility and performance issues in the most quantitative way allowed by resources and schedules in order to develop classification guidelines. This approach requires no changes in existing Department of Energy test procedures.

Utility-preserving transaction data anonymization with low information loss.

Science.gov (United States)

Loukides, Grigorios; Gkoulalas-Divanis, Aris

2012-08-01

Transaction data record various information about individuals, including their purchases and diagnoses, and are increasingly published to support large-scale and low-cost studies in domains such as marketing and medicine. However, the dissemination of transaction data may lead to privacy breaches, as it allows an attacker to link an individual's record to their identity. Approaches that anonymize data by eliminating certain values in an individual's record or by replacing them with more general values have been proposed recently, but they often produce data of limited usefulness. This is because these approaches adopt value transformation strategies that do not guarantee data utility in intended applications and objective measures that may lead to excessive data distortion. In this paper, we propose a novel approach for anonymizing data in a way that satisfies data publishers' utility requirements and incurs low information loss. To achieve this, we introduce an accurate information loss measure and an effective anonymization algorithm that explores a large part of the problem space. An extensive experimental study, using click-stream and medical data, demonstrates that our approach permits many times more accurate query answering than the state-of-the-art methods, while it is comparable to them in terms of efficiency.

Review of utility values for economic modeling in type 2 diabetes.

Science.gov (United States)

Beaudet, Amélie; Clegg, John; Thuresson, Per-Olof; Lloyd, Adam; McEwan, Phil

2014-06-01

Economic analysis in type 2 diabetes mellitus (T2DM) requires an assessment of the effect of a wide range of complications. The objective of this article was to identify a set of utility values consistent with the National Institute for Health and Care Excellence (NICE) reference case and to critically discuss and illustrate challenges in creating such a utility set. A systematic literature review was conducted to identify studies reporting utility values for relevant complications. The methodology of each study was assessed for consistency with the NICE reference case. A suggested set of utility values applicable to modeling was derived, giving preference to studies reporting multiple complications and correcting for comorbidity. The review considered 21 relevant diabetes complications. A total of 16,574 articles were identified; after screening, 61 articles were assessed for methodological quality. Nineteen articles met NICE criteria, reporting utility values for 20 of 21 relevant complications. For renal transplant, because no articles meeting NICE criteria were identified, two articles using other methodologies were included. Index value estimates for T2DM without complication ranged from 0.711 to 0.940. Utility decrement associated with complications ranged from 0.014 (minor hypoglycemia) to 0.28 (amputation). Limitations associated with the selection of a utility value for use in economic modeling included variability in patient recruitment, heterogeneity in statistical analysis, large variability around some point estimates, and lack of recent data. A reference set of utility values for T2DM and its complications in line with NICE requirements was identified. This research illustrates the challenges associated with systematically selecting utility data for economic evaluations. Copyright © 2014 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Resolving inconsistencies in utility measurement under risk: Tests of generalizations of expected utility

OpenAIRE

Han Bleichrodt; José María Abellán-Perpiñan; JoséLuis Pinto; Ildefonso Méndez-Martínez

2005-01-01

This paper explores inconsistencies that occur in utility measurement under risk when expected utility theory is assumed and the contribution that prospect theory and some other generalizations of expected utility can make to the resolution of these inconsistencies. We used five methods to measure utilities under risk and found clear violations of expected utility. Of the theories studied, prospect theory was the most consistent with our data. The main improvement of prospect theory over expe...

An overview of instrumentation for the Large Binocular Telescope

Science.gov (United States)

Wagner, R. Mark

2012-09-01

An overview of instrumentation for the Large Binocular Telescope (LBT) is presented. Optical instrumentation includes the Large Binocular Camera (LBC), a pair of wide-field (27' x 27') mosaic CCD imagers at the prime focus, and the Multi-Object Double Spectrograph (MODS), a pair of dual-beam blue-red optimized long-slit spectrographs mounted at the left and right direct F/15 Gregorian foci incorporating multiple slit masks for multi-object spectroscopy over a 6' field and spectral resolutions of up to 2000. Infrared instrumentation includes the LBT Near-IR Spectroscopic Utility with Camera and Integral Field Unit for Extragalactic Research (LUCI), a modular near-infrared (0.9-2.5 μm) imager and spectrograph pair mounted at the left and right front bent F/15 Gregorian foci and designed for seeing-limited (FOV: 4' × 4') imaging, long-slit spectroscopy, and multiobject spectroscopy utilizing cooled slit masks and diffraction limited (FOV: 0'.5 × 0'.5) imaging and long-slit spectroscopy. Strategic instruments under development that can utilize the full 23-m baseline of the LBT include an interferometric cryogenic beam combiner with near-infrared and thermal-infrared instruments for Fizeau imaging and nulling interferometry (LBTI) and an optical bench near-infrared beam combiner utilizing multi-conjugate adaptive optics for high angular resolution and sensitivity (LINC-NIRVANA). LBTI is currently undergoing commissioning on the LBT and utilizing the installed adaptive secondary mirrors in both single- sided and two-sided beam combination modes. In addition, a fiber-fed bench spectrograph (PEPSI) capable of ultra high resolution spectroscopy and spectropolarimetry (R = 40,000-300,000) will be available as a principal investigator instrument. Over the past four years the LBC pair, LUCI1, and MODS1 have been commissioned and are now scheduled for routine partner science observations. The delivery of both LUCI2 and MODS2 is anticipated before the end of 2012. The

Large area high-speed metrology SPM system

International Nuclear Information System (INIS)

Klapetek, P; Valtr, M; Martinek, J; Picco, L; Payton, O D; Miles, M; Yacoot, A

2015-01-01

We present a large area high-speed measuring system capable of rapidly generating nanometre resolution scanning probe microscopy data over mm 2 regions. The system combines a slow moving but accurate large area XYZ scanner with a very fast but less accurate small area XY scanner. This arrangement enables very large areas to be scanned by stitching together the small, rapidly acquired, images from the fast XY scanner while simultaneously moving the slow XYZ scanner across the region of interest. In order to successfully merge the image sequences together two software approaches for calibrating the data from the fast scanner are described. The first utilizes the low uncertainty interferometric sensors of the XYZ scanner while the second implements a genetic algorithm with multiple parameter fitting during the data merging step of the image stitching process. The basic uncertainty components related to these high-speed measurements are also discussed. Both techniques are shown to successfully enable high-resolution, large area images to be generated at least an order of magnitude faster than with a conventional atomic force microscope. (paper)

Large area high-speed metrology SPM system

Science.gov (United States)

Klapetek, P.; Valtr, M.; Picco, L.; Payton, O. D.; Martinek, J.; Yacoot, A.; Miles, M.

2015-02-01

We present a large area high-speed measuring system capable of rapidly generating nanometre resolution scanning probe microscopy data over mm2 regions. The system combines a slow moving but accurate large area XYZ scanner with a very fast but less accurate small area XY scanner. This arrangement enables very large areas to be scanned by stitching together the small, rapidly acquired, images from the fast XY scanner while simultaneously moving the slow XYZ scanner across the region of interest. In order to successfully merge the image sequences together two software approaches for calibrating the data from the fast scanner are described. The first utilizes the low uncertainty interferometric sensors of the XYZ scanner while the second implements a genetic algorithm with multiple parameter fitting during the data merging step of the image stitching process. The basic uncertainty components related to these high-speed measurements are also discussed. Both techniques are shown to successfully enable high-resolution, large area images to be generated at least an order of magnitude faster than with a conventional atomic force microscope.

Down the slippery slop: Utility incorporation of environmental externalities

International Nuclear Information System (INIS)

Vandenberg, A.J.; Tempchin, R.S.; Mitnick, S.A.; Harron, A.L.

1993-01-01

Advocates of incorporating environmental externalities in electric utility decision-making have concentrated on new electric generating resources, with some success. Such public utility commission actions compel utilities to consider, explicitly, the cost of sulfur dioxide, carbon dioxide, nitrogen oxides and other emission of power-plants when comparing the economics of new generating resources with those of other resource options (e.g., demand-side management and gas-fired non-utility generator projects). This paper summarizes a study which estimated costs of incorporating externalities in utility system operations. We also present an analysis of the Tellus work in this area, and contrast Tellus' methodology, assumptions and results with our own. Estimates of the cost of incorporating externalities in system operations is rather large, in terms of the increased fuel and purchased power cost that ratepayers would have to bear. For the eight cases we examined, the incorporation of externalities caused fuel and purchased power cost to be 9.3 to 69.5 percent higher, relative to what it would have been under traditional generating unit commitment and dispatch. Furthermore, we believe that these estimates of fuel and purchased power cost increases are conservative. In particular, because our analyses focused on utility system operations in 1995, the key assumption about the fuel cost differential (i.e., coal versus natural gas) probably underestimates the differential in later years, significantly, when virtually all forecasters foresee faster cost escalation rates for gas. In general, the higher the fuel cost differential, the faster cost escalation rates for gas. In general, the higher the fuel cost differential, the greater the cost of an externality policy. Unless the record is set straight soon, the idea that incorporating externalities is virtually costless will further spread in the regulatory community and among government policy-makers

A Methodology for Estimating Large-Customer Demand Response MarketPotential

Energy Technology Data Exchange (ETDEWEB)

Goldman, Charles; Hopper, Nicole; Bharvirkar, Ranjit; Neenan,Bernie; Cappers,Peter

2007-08-01

Demand response (DR) is increasingly recognized as an essential ingredient to well-functioning electricity markets. DR market potential studies can answer questions about the amount of DR available in a given area and from which market segments. Several recent DR market potential studies have been conducted, most adapting techniques used to estimate energy-efficiency (EE) potential. In this scoping study, we: reviewed and categorized seven recent DR market potential studies; recommended a methodology for estimating DR market potential for large, non-residential utility customers that uses price elasticities to account for behavior and prices; compiled participation rates and elasticity values from six DR options offered to large customers in recent years, and demonstrated our recommended methodology with large customer market potential scenarios at an illustrative Northeastern utility. We observe that EE and DR have several important differences that argue for an elasticity approach for large-customer DR options that rely on customer-initiated response to prices, rather than the engineering approaches typical of EE potential studies. Base-case estimates suggest that offering DR options to large, non-residential customers results in 1-3% reductions in their class peak demand in response to prices or incentive payments of $500/MWh. Participation rates (i.e., enrollment in voluntary DR programs or acceptance of default hourly pricing) have the greatest influence on DR impacts of all factors studied, yet are the least well understood. Elasticity refinements to reflect the impact of enabling technologies and response at high prices provide more accurate market potential estimates, particularly when arc elasticities (rather than substitution elasticities) are estimated.

Utilization of accelerators for development of polymer materials

International Nuclear Information System (INIS)

Omichi, Hideki

1987-01-01

There are two processes in the development of polymer materials using accelerators. One is to induce graft polymerization by irradiating the electron beam of high dose rate, and another is to induce cross-linking or decomposition by irradiating on existing polymer materials. The former is mostly at the stage of research and development, while in the latter, the industrial utilization has advanced as bridged electric wires, foaming materials and thermal contraction materials. In this paper, the results of the basic research are mainly reported. The polymerization of vinyl monomers such as styrene easily advances by the irradiation of gamma ray or electron beam, accordingly, it is widely utilized as the object of basic research. When the plural radicals produced by the irradiation of polymers couple mutually or attach to double bonds, the polymer of large molecular weight arises, on the other hand, when radicals arise by the severance of main chains in polymers, the molecular weight decreases. The utilization of accelerators for the development of polymer materials is diversified. Hereafter, also particle accelerators will be used for this field. Already ion implantation, sputtering, hole-opening and so on for polymer materials began to be studied, and the new development of materials is expected. (Kako, I.)

US utility partnerships

International Nuclear Information System (INIS)

Worthington, B.

1995-01-01

Activities of the United States Energy Association were reviewed, as well as the manner in which its members are benefitting from the Association's programs. The principal cooperative program set up is the Utility Partnership Program, which was described. Through this program the Association is matching US companies, both electric utilities and gas utilities, with counterparts in Eastern Europe or the former Soviet Union. So far, about 25 partnerships were signed, e.g. in the Czech Republic, in Kazakhstan, in Poland, and in Slovakia. It was estimated that the return to the United States from the investments made by the American government in these Utility Partnership Programs has been well over 100-fold

Economic scale of utilization of radiation (I): Industry. Comparison between Japan and the U.S.A

International Nuclear Information System (INIS)

Tagawa, Seiichi; Kashiwagi, Masayuki; Kamada, Toshimitsu; Sekiguchi, Masayuki; Hosobuchi, Kazunari; Tominaga, Hiroshi; Ooka, Norikazu; Makuuchi, Keizo

2002-01-01

Utilization of radiation in the industrial field has been enlarged due to the variety of technologies. In the present paper, the economic scale between the U.S.A. and Japan is compared with selected industrial parameters such as sterilization, semiconductors, radiographic testing (RT) and radial tire production because the very large industrial markets make a whole comparison difficult. The economic scale revealed was about 56b$ (1$=121 yen) for the U.S.A. and 39b$ for Japan. The former is large in magnitude by a factor of 1.4. With respect to the relative ratio versus the GDP, the former was 0.7% and 0.9% for the latter. This implied that utilization of radiation in industry is large in magnitude and is expected to be further developed. Regarding electron beam (EB) accelerators, for example, 648 units were installed in North America and 308 units for Japan during the past 29 years. The large number of the former is attributed to use in curing and heat shrinkable tubes (film). (author)

Friction and Lubrication of Large Tilting-Pad Thrust Bearings

Directory of Open Access Journals (Sweden)

Michał Wasilczuk

2015-04-01

Full Text Available Fluid film bearings have been extensively used in the industry because of their unbeatable durability and extremely low friction coefficient, despite a very low coefficient of friction dissipation of energy being noticeable, especially in large bearings. Lubricating systems of large tilting pad thrust bearings utilized in large, vertical shaft hydrogenerators are presented in this paper. A large amount of heat is generated due to viscous shearing of the lubricant large tilting pad thrust bearings, and this requires systems for forced cooling of the lubricant. In the dominant bath lubrication systems, cooling is realized by internal coolers or external cooling systems, with the latter showing some important advantages at the cost of complexity and also, potentially, lower reliability. Substantial losses in the bearings, reaching 1 MW in extreme cases, are a good motivation for the research and development aimed at reducing them. Some possible methods and their potential efficiency, along with some effects already documented, are also described in the paper.

The utility of administrative diagnostic x rays. Final report

International Nuclear Information System (INIS)

Potchen, E.J.; Gard, J.W.; Gift, D.A.; Harris, G.I.; Alexander, G.P.

1982-08-01

A significant proportion of diagnostic medical procedures is used in response to public or private policy rather than individual patient/physician interaction. Such administrative use of diagnostic procedures illustrates the lack of accepted 'referral criteria.' This document reports results of a descriptive study of policy formulation and implementation regarding use of employment-related chest and lumbar-spine radiographs by employers in the State of Michigan. Major observations of the study are that: factors influencing policy formulation are diverse and largely nonmedical; organizational policies developed in similar environments are often very dissimilar and are highly subject to external influence; and perceptions of policy success and examination utility typically are subjective and uncertain. It is concluded that considerable opportunity exists to enhance the utility of policy-motivated x rays by modifying the processes of policy formulation and evaluation

Clinical utility of the Prostate Health Index (phi) for biopsy decision management in a large group urology practice setting.

Science.gov (United States)

White, Jay; Shenoy, B Vittal; Tutrone, Ronald F; Karsh, Lawrence I; Saltzstein, Daniel R; Harmon, William J; Broyles, Dennis L; Roddy, Tamra E; Lofaro, Lori R; Paoli, Carly J; Denham, Dwight; Reynolds, Mark A

2018-04-01

Deciding when to biopsy a man with non-suspicious DRE findings and tPSA in the 4-10 ng/ml range can be challenging, because two-thirds of such biopsies are typically found to be benign. The Prostate Health Index (phi) exhibits significantly improved diagnostic accuracy for prostate cancer detection when compared to tPSA and %fPSA, however only one published study to date has investigated its impact on biopsy decisions in clinical practice. An IRB approved observational study was conducted at four large urology group practices using a physician reported two-part questionnaire. Physician recommendations were recorded before and after receiving the phi test result. A historical control group was queried from each site's electronic medical records for eligible men who were seen by the same participating urologists prior to the implementation of the phi test in their practice. 506 men receiving a phi test were prospectively enrolled and 683 men were identified for the historical control group (without phi). Biopsy and pathological findings were also recorded for both groups. Men receiving a phi test showed a significant reduction in biopsy procedures performed when compared to the historical control group (36.4% vs. 60.3%, respectively, P phi score impacted the physician's patient management plan in 73% of cases, including biopsy deferrals when the phi score was low, and decisions to perform biopsies when the phi score indicated an intermediate or high probability of prostate cancer (phi ≥36). phi testing significantly impacted the physician's biopsy decision for men with tPSA in the 4-10 ng/ml range and non-suspicious DRE findings. Appropriate utilization of phi resulted in a significant reduction in biopsy procedures performed compared to historical patients seen by the same participating urologists who would have met enrollment eligibility but did not receive a phi test.

A Study on promotion of utilizing waste energy

Energy Technology Data Exchange (ETDEWEB)

Ahn, Jae Ho [Korea Energy Economics Institute, Euiwang (Korea)

1999-01-01

The utilization of waste energy occupying over 80% of alternative energy has been an important issue with the trend of large-sized waste incinerator. The object of this study is to seek the methods for the active application of waste energy, which is produced at the process of waste generation and disposal. It is expected to help energy saving, foreign currency saving and prevent environmental pollution by utilizing alternative energy actively. It should have basic information, related information for examining technical feasibility, and feasibility examination of the surroundings for developing the demand place. Moreover, it should enhance the energy saving by recommending use of waste energy with introducing recommendation system of installing waste energy collection system. It should also consider the support of the introduction of waste energy system as well as the aspect of regional energy policy. In addition, the development and distribution of applied technology for waste energy are needed. (author). 36 refs., 4 figs., 77 tabs.

Utility-Scale Solar 2014. An Empirical Analysis of Project Cost, Performance, and Pricing Trends in the United States

Energy Technology Data Exchange (ETDEWEB)

Bolinger, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Seel, Joachim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-09-01

Other than the nine Solar Energy Generation Systems (“SEGS”) parabolic trough projects built in the 1980s, virtually no large-scale or “utility-scale” solar projects – defined here to include any groundmounted photovoltaic (“PV”), concentrating photovoltaic (“CPV”), or concentrating solar thermal power (“CSP”) project larger than 5 MW_AC – existed in the United States prior to 2007. By 2012 – just five years later – utility-scale had become the largest sector of the overall PV market in the United States, a distinction that was repeated in both 2013 and 2014 and that is expected to continue for at least the next few years. Over this same short period, CSP also experienced a bit of a renaissance in the United States, with a number of large new parabolic trough and power tower systems – some including thermal storage – achieving commercial operation. With this critical mass of new utility-scale projects now online and in some cases having operated for a number of years (generating not only electricity, but also empirical data that can be mined), the rapidly growing utility-scale sector is ripe for analysis. This report, the third edition in an ongoing annual series, meets this need through in-depth, annually updated, data-driven analysis of not just installed project costs or prices – i.e., the traditional realm of solar economics analyses – but also operating costs, capacity factors, and power purchase agreement (“PPA”) prices from a large sample of utility-scale solar projects in the United States. Given its current dominance in the market, utility-scale PV also dominates much of this report, though data from CPV and CSP projects are presented where appropriate.

Radiological site assessment at sun rose claim utilizing ScanPlot{sup SM} technology

Energy Technology Data Exchange (ETDEWEB)

Downey, H., E-mail: heath.downey@amecfw.com [Amec Foster Wheeler, Portland, ME (United States)

2015-07-01

ScanPlot{sup SM} gamma spectroscopy land survey system was utilized for the overland survey of uranium at the Sun Rose Claim in the Northwest Territories. The Sun Rose Claim is a former uranium exploration site and previous investigations had identified uranium ore and waste rock. ScanPlot{sup SM} radiological scan surveys were performed utilizing a backpack system. ScanPlot{sup SM} platform utilized spectroscopy grade sodium iodide detectors configured for optimal spatial coverage and radiation detection. Survey locations were recorded using an on-board global positioning system (GPS). The radiological spectral data from the radiation detectors is automatically logged and linked with the GPS coordinates to an on-board computer to create isocontour figures using a color scale to represent radioactivity levels. The advantage of utilizing the ScanPlot{sup SM} system for this assessment is that the nature and extent of uranium is provided without having to collect and assay a large number of samples. (author)

PILOT-AND FULL-SCALE DEMONSTRATION OF ADVANCED MERCURY CONTROL TECHNOLOGIES FOR LIGNITE-FIRED POWER PLANTS

Energy Technology Data Exchange (ETDEWEB)

Steven A. Benson; Charlene R. Crocker; Kevin C. Galbreath; Jay R. Gunderson; Michael J. Holmes; Jason D. Laumb; Jill M. Mackenzie; Michelle R. Olderbak; John H. Pavlish; Li Yan; Ye Zhuang

2005-02-01

The overall objective of the project was to develop advanced innovative mercury control technologies to reduce mercury emissions by 50%-90% in flue gases typically found in North Dakota lignite-fired power plants at costs from one-half to three-quarters of current estimated costs. Power plants firing North Dakota lignite produce flue gases that contain >85% elemental mercury, which is difficult to collect. The specific objectives were focused on determining the feasibility of the following technologies: Hg oxidation for increased Hg capture in dry scrubbers, incorporation of additives and technologies that enhance Hg sorbent effectiveness in electrostatic precipitators (ESPs) and baghouses, the use of amended silicates in lignite-derived flue gases for Hg capture, and the use of Hg adsorbents within a baghouse. The approach to developing Hg control technologies for North Dakota lignites involved examining the feasibility of the following technologies: Hg capture upstream of an ESP using sorbent enhancement, Hg oxidation and control using dry scrubbers, enhanced oxidation at a full-scale power plant using tire-derived fuel and oxidizing catalysts, and testing of Hg control technologies in the Advanced Hybrid{trademark} filter.

Engaging Students in Large Health Classes with Active Learning Strategies

Science.gov (United States)

Elliott, Steven; Combs, Sue; Huelskamp, Amelia; Hritz, Nancy

2017-01-01

Creative K-12 health teachers can engage students in large classes by utilizing active learning strategies. Active learning involves engaging students in higher-order tasks, such as analysis and synthesis, which is a crucial element of the movement toward what is commonly called "learner-centered" teaching. Health education teachers who…

Large-area Fabry-Perot modulator based on electro-optic polymers

DEFF Research Database (Denmark)

Benter, Nils; Bertram, Ralph Peter; Soergel, Elisabeth

2006-01-01

We present a large-area electro-optic Fabry-Perot modulator utilizing a photoaddressable bis-azo polymer placed between two dielectric mirrors with an open aperture of 2 cm. A modulation efficientcy of 1% at an effective modulation voltage of 20 V for a wavelength of 1.55 mymeter is demonstrated...

UTILIZATION OF LIGHTWEIGHT MATERIALS MADE FROM COAL GASIFICATION SLAGS

International Nuclear Information System (INIS)

None

1998-01-01

The integrated-gasification combined-cycle (IGCC) process is an emerging technology that utilizes coal for power generation and production of chemical feedstocks. However, the process generates large amounts of solid waste, consisting of vitrified ash (slag) and some unconverted carbon. In previous projects, Praxis investigated the utilization of ''as-generated'' slags for a wide variety of applications in road construction, cement and concrete production, agricultural applications, and as a landfill material. From these studies, we found that it would be extremely difficult for ''as-generated'' slag to find large-scale acceptance in the marketplace even at no cost because the materials it could replace were abundantly available at very low cost. It was further determined that the unconverted carbon, or char, in the slag is detrimental to its utilization as sand or fine aggregate. It became apparent that a more promising approach would be to develop a variety of value-added products from slag that meet specific industry requirements. This approach was made feasible by the discovery that slag undergoes expansion and forms a lightweight material when subjected to controlled heating in a kiln at temperatures between 1400 and 1700 F. These results confirmed the potential for using expanded slag as a substitute for conventional lightweight aggregates (LWA). The technology to produce lightweight and ultra-lightweight aggregates (ULWA) from slag was subsequently developed by Praxis with funding from the Electric Power Research Institute (EPRI), Illinois Clean Coal Institute (ICCI), and internal resources. The major objectives of the subject project are to demonstrate the technical and economic viability of commercial production of LWA and ULWA from slag and to test the suitability of these aggregates for various applications. The project goals are to be accomplished in two phases: Phase I, comprising the production of LWA and ULWA from slag at the large pilot scale, and

Utilization of the irradiation holes in the core at HANARO

International Nuclear Information System (INIS)

Lee, Shoong Sung; Ahn, Guk Hoon

2008-01-01

HANARO is a multipurpose research reactor. The three hexagonal and four circular holes are reserved for the irradiation tests in the core. Twenty holes including two NTD(Neutron Transmutation Doping) holes, a LH(Large Hole) and NAA holes are located in the reflector tank. These hole have been used for radioisotope production, material and fuel irradiation tests, beam application research and neutron activation analysis. In the initial stage of normal operation, the using time of irradiation holes located in the core was less the 40% of the reactor operation day. To raise utilization of irradiation holes, the equipment and facilities have been developed such as various capsules. Another area for increasing the utilization of HANARO was the fuel irradiation tests to develop the new fuels. Various fuel irradiation tests have been performed. Recently, the usage time of the irradiation holes in the core was more than 90% of the reactor operation day. If the FTL starts an irradiation service, the irradiation holes in the core will be fully used. In this paper describes the status of utilization of irradiation holes in the core

Deliberate utilization of interaction torques brakes elbow extension in a fast throwing motion.

Science.gov (United States)

Hore, Jon; Debicki, Derek B; Gribble, Paul L; Watts, Sherry

2011-05-01

We tested the hypothesis that in fast arm movements the CNS deliberately utilizes interaction torques to decelerate (brake) joint rotations. Twelve subjects performed fast 2-D overarm throws in which large elbow extension velocities occurred. Joint motions were computed from recordings made with search coils; joint torques were calculated using inverse dynamics. After ball release, a large follow-through shoulder extension acceleration occurred that was initiated by shoulder extensor muscle torque. This shoulder acceleration produced a flexor interaction torque at the elbow that initiated elbow deceleration (braking). An instantaneous mechanical interaction of passive torques then occurred between elbow and shoulder, i.e., elbow extension deceleration produced a large shoulder extensor interaction torque that contributed to the shoulder extension acceleration which, simultaneously, produced a large elbow flexor interaction torque that contributed to elbow extension deceleration, and so on. Late elbow flexor muscle torque also contributed to elbow deceleration. The interaction of passive torques between shoulder and elbow was braked by shoulder flexor muscle torque. In this mechanism, shoulder musculature contributed to braking elbow extension in two ways: shoulder extensors initiated the mechanical interaction of passive torques between shoulder and elbow and shoulder flexors dissipated kinetic energy from elbow braking. It is concluded that, in fast 2-D throws, the CNS deliberately utilizes powerful interaction torques between shoulder and elbow to brake motion at the elbow.

Translation termination in pyrrolysine-utilizing archaea.

Science.gov (United States)

Alkalaeva, Elena; Eliseev, Boris; Ambrogelly, Alexandre; Vlasov, Peter; Kondrashov, Fyodor A; Gundllapalli, Sharath; Frolova, Lyudmila; Söll, Dieter; Kisselev, Lev

2009-11-03

Although some data link archaeal and eukaryotic translation, the overall mechanism of protein synthesis in archaea remains largely obscure. Both archaeal (aRF1) and eukaryotic (eRF1) single release factors recognize all three stop codons. The archaeal genus Methanosarcinaceae contains two aRF1 homologs, and also uses the UAG stop to encode the 22nd amino acid, pyrrolysine. Here we provide an analysis of the last stage of archaeal translation in pyrrolysine-utilizing species. We demonstrated that only one of two Methanosarcina barkeri aRF1 homologs possesses activity and recognizes all three stop codons. The second aRF1 homolog may have another unknown function. The mechanism of pyrrolysine incorporation in the Methanosarcinaceae is discussed.

Economic utilization of general aviation airport runways

Science.gov (United States)

Piper, R. R.

1971-01-01

The urban general aviation airport economics is studied in detail. The demand for airport services is discussed, and the different types of users are identified. The direct cost characteristics of the airport are summarized; costs to the airport owner are largely fixed, and, except at certain large airports, weight is not a significant factor in airport costs. The efficient use of an existing airport facility is explored, with the focus on the social cost of runway congestion as traffic density at the airport build up and queues form. The tradeoff between aircraft operating costs and airport costs is analyzed in terms of runway length. The transition from theory to practice is treated, and the policy of charging prices only on aircraft storage and fuel is felt likely to continue. Implications of the study from the standpoint of public policy include pricing that spreads traffic peaks to improve runway utilization, and pricing that discriminates against aircraft requiring long runways and causes owners to adopt V/STOL equipment.

An informatics approach to assess pediatric pharmacotherapy: design and implementation of a hospital drug utilization system.

Science.gov (United States)

Zuppa, Athena; Vijayakumar, Sundararajan; Jayaraman, Bhuvana; Patel, Dimple; Narayan, Mahesh; Vijayakumar, Kalpana; Mondick, John T; Barrett, Jeffrey S

2007-09-01

Drug utilization in the inpatient setting can provide a mechanism to assess drug prescribing trends, efficiency, and cost-effectiveness of hospital formularies and examine subpopulations for which prescribing habits may be different. Such data can be used to correlate trends with time-dependent or seasonal changes in clinical event rates or the introduction of new pharmaceuticals. It is now possible to provide a robust, dynamic analysis of drug utilization in a large pediatric inpatient setting through the creation of a Web-based hospital drug utilization system that retrieves source data from our accounting database. The production implementation provides a dynamic and historical account of drug utilization at the authors' institution. The existing application can easily be extended to accommodate a multi-institution environment. The creation of a national or even global drug utilization network would facilitate the examination of geographical and/or socioeconomic influences in drug utilization and prescribing practices in general.

Predicting Trophic Interactions and Habitat Utilization in the California Current Ecosystem

Science.gov (United States)

2015-09-30

Foraging patterns: model-data comparison . Simulated (colored circles) and observed (black circles) foraging locations for male sea lion individuals off...focusing on trophic interactions affecting habitat utilization and foraging patterns of California sea lions (CSL) in the California Current Large Marine...by considering patterns of covariability between environmental variables (e.g., temperature, primary production) and foraging patterns and success of

Report on progress of researches by common utilization of JAERI nuclear facilities, for fiscal, 1991

International Nuclear Information System (INIS)

1992-08-01

The results of the joint researches by utilizing the facilities of JAERI in 1991 fiscal year were summarized, and this report was able to be completed. Many researchers in whole Japan took part in many themes, and the very significant results were obtained. Now this joint research has reached the great turnabout period. The reconstructed JRR-3M was offered for joint utilization since April, 1991, and the utilization for neutron diffraction and scattering increased largely. As for the ion irradiation facility in Takasaki Research Establishment, the partial operation will be started in the next year, and the joint utilization is expected to begin. Accompanying the diversification of the utilization of facilities, in order to properly meet the needs of users, the thorough revision of the system seems necessary. The number of research themes in 1991 was 222 cases. JRR-3M accomplished the joint utilization operation of 8 cycles as expected, but JRR-2 caused a trouble during 5th cycle, and the operation thereafter was canceled. In this book, 159 reports are collected. (K.I.)

Evaluation of the "Angelina Jolie Effect" on Screening Mammography Utilization in an Academic Center.

Science.gov (United States)

Huesch, Marco D; Schetter, Susann; Segel, Joel; Chetlen, Alison

2017-08-01

The aim of this study was to understand the impact on screening mammography at our institution, comparing weekly utilization in the 2 years before and the 2 years after Ms Angelina Jolie disclosed in the New York Times on May 13, 2013, that she had had a prophylactic double mastectomy. All 48,110 consecutive screening mammograms conducted at our institution between May 16, 2011, and May 16, 2015, were selected from our electronic medical record system. We used interrupted time series statistical models and graphical methods on utilization data to understand utilization changes before and after Ms Jolie's news. The graphed trend of weekly screening mammogram utilization failed to show changes around the time of interest. Analytical models and statistical tests also failed to show a step change increase or acceleration of utilization around May 2013. However, graphical and time series analyses showed a flattening of utilization in the middle of 2014. In our well-powered analysis in a large regional breast imaging center, we found no support for the hypothesis that this celebrity news drove increased screening. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Patterns of Utilization of Adjuvant Radiotherapy and Outcomes in Black Women After Breast Conservation at a Large Multidisciplinary Cancer Center

International Nuclear Information System (INIS)

Edwards-Bennett, Sophia M.; Jacks, Lindsay M.; McCormick, Beryl; Zhang, Zhigang; Azu, Michelle; Ho, Alice; Powell, Simon; Brown, Carol

2011-01-01

Purpose: Population-based studies have reported that as many of 35% of black women do not undergo radiotherapy (RT) after breast conservation surgery (BCS). The objective of the present study was to determine whether this trend persisted at a large multidisciplinary cancer center, and to identify the factors that predict for noncompliance with RT and determine the outcomes for this subset of patients. Methods and Materials: Between January 2002 and December 2007, 83 black women underwent BCS at Memorial Sloan-Kettering Cancer Center and were therefore eligible for the present study. Of the 83 women, 38 (46%) had Stage I, 38 (46%) Stage II, and 7 (8%) Stage III disease. Of the study cohort, 31 (37%) had triple hormone receptor-negative tumors. RT was recommended for 81 (98%) of the 83 patients (median dose, 60 Gy). Results: Of the 81 women, 12 (15%) did not receive the recommended adjuvant breast RT. Nonreceipt of chemotherapy (p = .003) and older age (p = .009) were associated with nonreceipt of RT. With a median follow-up of 70 months, the 3-year local control, locoregional control, recurrence-free survival, disease-free survival, and overall survival rate was 99% (actuarial 5-year rate, 97%), 96% (actuarial 5-year rate, 93%), 95% (actuarial 5-year rate, 92%), 92% (actuarial 5-year rate, 89%), and 95% (actuarial 5-year rate, 91%), respectively. Conclusion: We found a greater rate of utilization adjuvant breast RT (85%) among black women after BCS than has been reported in recent studies, indicating that excellent outcomes are attainable for black women after BCS when care is administered in a multidisciplinary cancer center.

Re-thinking china's densified biomass fuel policies: Large or small scale?

International Nuclear Information System (INIS)

Shan, Ming; Li, Dingkai; Jiang, Yi; Yang, Xudong

2016-01-01

Current policies and strategies related to the utilization of densified biomass fuel (DBF) in China are mainly focused on medium- or large-scale manufacturing modes, which cannot provide feasible solutions to solve the household energy problems in China's rural areas. To simplify commercial processes related to the collection of DBF feedstock and the production and utilization of fuel, a novel village-scale DBF approach is proposed. Pilot demonstration projects have shown the feasibility and flexibility of this new approach in realizing sustainable development in rural China. Effective utilization of DBF in rural China will lead to gains for global, regional, and local energy savings, environmental protection, sustainable development, and related social benefits. It could also benefit other developing countries for better utilization of biomass as a viable household energy source. This proposal therefore delivers the possibility of reciprocal gains, and as such deserves the attention of policy makers and various stakeholders. - Highlights: •A field survey of Chinese densified biomass fuel (DBF) development is conducted. •The current situation and problems related to China's DBF industry are analyzed. •A novel and viable village-scale DBF utilization mode is proposed. •Further actions are suggested to boost the utilization of DBF in rural China.

Entrez Programming Utilities

Data.gov (United States)

U.S. Department of Health & Human Services — The Entrez Programming Utilities (E-utilities) are a set of eight server-side programs that provide a stable interface into the Entrez query and database system at...

Strategies to reduce blood product utilization in obstetric practice.

Science.gov (United States)

Neb, Holger; Zacharowski, Kai; Meybohm, Patrick

2017-06-01

Patient blood management (PBM) aims to improve patient outcome and safety by reducing the number of unnecessary RBC transfusions and vitalizing patient-specific anemia reserves. Although PBM is increasingly recognized as best clinical practice in elective surgery, implementation of PBM is restrained in the setting of obstetrics. This review summarizes recent findings to reduce blood product utilization in obstetric practice. PBM-related evidence-based benefits should be urgently adopted in the field of obstetric medicine. Intravenous iron can be considered a safe, effective strategy to replenish iron stores and to correct both pregnancy-related and hemorrhage-related iron deficiency anemia. In addition to surgical techniques and the use of uterotonics, recent findings support early administration of tranexamic acid, fibrinogen and a coagulation factor concentrate-based, viscoelastically guided practice in case of peripartum hemorrhage to manage coagulopathy. In patients with cesarean section, autologous red cell blood salvage may reduce blood product utilization, although its use in this setting is controversial. Implementation of PBM in obstetric practice offers large potential to reduce blood loss and transfusion requirements of allogeneic blood products, even though large clinical trials are lacking in this specific field. Intravenous iron supplementation may be suggested to increase peripartum hemoglobin levels. Additionally, tranexamic acid and point-of-care-guided supplementation of coagulation factors are potent methods to reduce unnecessary blood loss and blood transfusions in obstetrics.

Development of a Deterministic Optimization Model for Design of an Integrated Utility and Hydrogen Supply Network

International Nuclear Information System (INIS)

Hwangbo, Soonho; Lee, In-Beum; Han, Jeehoon

2014-01-01

Lots of networks are constructed in a large scale industrial complex. Each network meet their demands through production or transportation of materials which are needed to companies in a network. Network directly produces materials for satisfying demands in a company or purchase form outside due to demand uncertainty, financial factor, and so on. Especially utility network and hydrogen network are typical and major networks in a large scale industrial complex. Many studies have been done mainly with focusing on minimizing the total cost or optimizing the network structure. But, few research tries to make an integrated network model by connecting utility network and hydrogen network. In this study, deterministic mixed integer linear programming model is developed for integrating utility network and hydrogen network. Steam Methane Reforming process is necessary for combining two networks. After producing hydrogen from Steam-Methane Reforming process whose raw material is steam vents from utility network, produced hydrogen go into hydrogen network and fulfill own needs. Proposed model can suggest optimized case in integrated network model, optimized blueprint, and calculate optimal total cost. The capability of the proposed model is tested by applying it to Yeosu industrial complex in Korea. Yeosu industrial complex has the one of the biggest petrochemical complex and various papers are based in data of Yeosu industrial complex. From a case study, the integrated network model suggests more optimal conclusions compared with previous results obtained by individually researching utility network and hydrogen network

Utility portfolio diversification

International Nuclear Information System (INIS)

Griffes, P.H.

1990-01-01

This paper discusses portfolio analysis as a method to evaluate utility supply decisions. Specifically a utility is assumed to increase the value of its portfolio of assets whenever it invests in a new supply technology. This increase in value occurs because the new asset either enhances the return or diversifies the risks of the firm's portfolio of assets. This evaluation method is applied to two supply innovations in the electric utility industry: jointly-owned generating plants and supply contracts with independent power producers (IPPs)

Distribution of hydrocarbon-utilizing microorganisms and hydrocarbon biodegradation potentials in Alaskan continental shelf areas

International Nuclear Information System (INIS)

Roubal, G.; Atlas, R.M.

1978-01-01

Hydrocarbon-utilizing microogranisms were enumerated from Alaskan continental shelf areas by using plate counts and a new most-probable-number procedure based on mineralization of 14 C-labeled hydrocarbons. Hydrocarbon utilizers were ubiquitously distributed, with no significant overall concentration differences between sampling regions or between surface water and sediment samples. There were, however, significant seasonal differences in numbers of hydrocarbon utilizers. Distribution of hydrocarbon utilizers within Cook Inlet was positively correlated with occurrence of hydrocarbons in the environment. Hydrocarbon biodegradation potentials were measured by using 14 C-radiolabeled hydrocarbon-spiked crude oil. There was no significant correlation between numbers of hydrocarbon utilizers and hydrocarbon biodegradation potentials. The biodegradation potentials showed large seasonal variations in the Beaufort Sea, probably due to seasonal depletion of available nutrients. Non-nutrient-limited biodegradation potentials followed the order hexadecane > naphthalene >> pristane > benzanthracene. In Cook Inlet, biodegradation potentials for hexadecane and naphthalene were dependent on availability of inorganic nutrients. Biodegradation potentials for pristane and benzanthracene were restricted, probably by resistance to attack by available enzymes in the indigenous population

Aiming for market leadership - from electricity utility to pellets manufacturer; Die Marktfuehrerschaft im Visier

Energy Technology Data Exchange (ETDEWEB)

Aeberli, O. E.

2003-07-01

This short article describes the plans of a small Swiss electricity utility to break out of its traditional role in power generation and the distribution of electricity and go into the production of wood pellets. The pellets, which are to be made from waste wood available from a wood processing facility in the utility's own region, are to be produced on a scale which can be described as being quite large for Switzerland. The article discusses this unusual approach for a Swiss power utility, which also operates a wood-fired power station and has diversified into other areas such as electrical house installations and overland power lines. The markets being aimed for are described, including modern low-energy-consumption housing projects.

Rent dissipation through electricity prices of publicly owned utilities

International Nuclear Information System (INIS)

Bernard, J-T.; Roland, M.

1997-01-01

Pricing policies of Canadian public utilities were examined. It was shown that under the existing set of rules the prices established are frequently below the marginal cost. This appears to be particularly true in the case of provinces that rely principally on hydroelectric resources. Study recommendations to bring electricity prices in line with marginal costs have had little success to date despite overwhelming evidence of large economic losses associated with the current institutional arrangements. This situation remains at the same time that governments apply high tax rates on incomes. By putting together two strands of economic literature, public choice and the theory of public utility pricing, this paper develops a simple model that explains why the median consumer prefers a low electricity price and a high tax rate. Hydro-Quebec survey data is used to confirm that these conditions are satisfied in Quebec. 17 refs., 1 tab

Citizen Advisory Council use in the electric utility industry

International Nuclear Information System (INIS)

McElfresh, R.W.

1991-01-01

Many electric utility companies have come to realize the Importance of seeking public input before launching corporate resources into major construction projects. One way to organize this input is to establish a Citizen Advisory Council (CAC). This paper describes the purpose of such a group, its advantages and limitations, and how it might be organized. This paper also describes the results of a survey of CAC use for facility siting purposes. Fifty large utility companies were contacted, eleven of which use CACs for siting purposes. Six of these were questioned in greater detail as to their success in using CACs on specific projects. All companies were positive about the use of CACs for public participation because the groups were able to bring valuable information to light and company credibility was enhanced. Most importantly, the responding companies believed they were able to save time in the siting and licensing process

The production and utilization of by-product agricultural fertilizer from flue gases

International Nuclear Information System (INIS)

Frank, N.W.; Hirano, S.

1992-01-01

The electron-beam process is one of the most effective methods for removing SO 2 and NO X from industrial flue gases and producing a usable by-product. This paper surveys the potential for production and consumption of alternative, usable, commercial by-products, in conjunction with major reductions in the inventory of emissions of SO 2 and NO X . An examination is made of the important limitations in the annual consumptive use or price of and/or net revenues from commonplace, electric utility, by-product types such as gypsum, sulfuric acid, etc. A principal focus of the work is an analysis and quantification of the major large-scale, growing and profitable markets for utility solid wastes that can be generated in agricultural fertilizer forms, including ammonium sulfate and other compounds that are available through stack-gas cleaning operations at large, coal-fired boilers. Cost study data is arranged to define the impact of commercial by-product yield and revenue on the economics of full scale SO 2 and NO X emission reduction activity. (author)

A new emergency control for voltage stability utilizing the time overvoltage capability of large shunt capacitor banks

Energy Technology Data Exchange (ETDEWEB)

Taylor, Carson W; Vanleuven, Allen L; Nordstrom, Jerry M [Bonneville Power Administration, Portland, OR (United States)

1994-12-31

Electric utilities have become increasing concerned with the possibility of voltage instability and voltage collapse. Although many countermeasures are a possible, control based countermeasures are often the most cost effective. Voltage collapse is often only a threat during unusual conditions such as very high load and major outages. For these low probability conditions, low cost emergency controls may be the only cost effective countermeasures. This paper provides details on a prototype installation by the Bonneville Power Administration of a new low cost emergency control for voltage stability named CAPS (CAPacitor bank series group Shorting). (author) 6 refs., 5 figs.

Forecasting distribution of numbers of large fires

Science.gov (United States)

Eidenshink, Jeffery C.; Preisler, Haiganoush K.; Howard, Stephen; Burgan, Robert E.

2014-01-01

Systems to estimate forest fire potential commonly utilize one or more indexes that relate to expected fire behavior; however they indicate neither the chance that a large fire will occur, nor the expected number of large fires. That is, they do not quantify the probabilistic nature of fire danger. In this work we use large fire occurrence information from the Monitoring Trends in Burn Severity project, and satellite and surface observations of fuel conditions in the form of the Fire Potential Index, to estimate two aspects of fire danger: 1) the probability that a 1 acre ignition will result in a 100+ acre fire, and 2) the probabilities of having at least 1, 2, 3, or 4 large fires within a Predictive Services Area in the forthcoming week. These statistical processes are the main thrust of the paper and are used to produce two daily national forecasts that are available from the U.S. Geological Survey, Earth Resources Observation and Science Center and via the Wildland Fire Assessment System. A validation study of our forecasts for the 2013 fire season demonstrated good agreement between observed and forecasted values.

Utilization of 5 MeV electron accelerator center and perspective

International Nuclear Information System (INIS)

Tanaka, Hiromi

1990-01-01

Electron beam process gives instantaneous effect as compared with heating process, and has such merits that energy consumption is very small, objects can be treated from outside, harmful chemicals are not used and treatment can be done as packed. The spread of electron beam process is largely due to the results of the development of highly reliable accelerators and utilization technologies, but as observed from all industrial fields, it is limited to only a part. In order to contribute to the solution of problems and the spread of electron beam process, Sumitomo Heavy Industries, Ltd. installed a 5 MeV, 200 kW large power accelerator developed by RDI in USA in the Electron Irradiation Application and Development Center opened in Tsukuba City. The Center was completed in June, 1989, and has carried out the activities of the development of irradiation utilization technologies, test irradiation and entrusted irradiation service. The features of electron beam process are high dose rate, the possibility of on and off as occasion demands, the preparation of radiation sources and the disposal of wastes being unnecessary, and no environmental problem. The industrialized processes, the types, energy and use of electron accelerators, the Tsukuba irradiation facilities and others are reported. (K.I.)

Utility franchises reconsidered

Energy Technology Data Exchange (ETDEWEB)

Weidner, B.

1981-11-01

It is easier to obtain a public utility franchise than one for a fast food store because companies like Burger King value the profit share and control available with a franchise arrangement. The investor-owned utilities (IOUs) in Chicago and elsewhere gets little financial or regulatory benefit, although they do have an alternative because the franchise can be taken over by the city with a one-year notice. As IOUs evolved, the annual franchise fee has been incorporated into the rate in a move that taxes ratepayers and maximizes profits. Cities that found franchising unsatisfactory are looking for ways to terminate the franchise and finance a takeover, but limited-term and indeterminate franchises may offer a better mechanism when public needs and utility aims diverge. A directory lists franchised utilities by state and comments on their legal status. (DCK)

What is unburned carbon?; Vad aer ofoerbraent?

Energy Technology Data Exchange (ETDEWEB)

Bjurstroem, Henrik [AaF-Process AB, Stockholm (Sweden); Suer, Pascal [Swedish Geotechnical Inst., Linkoeping (Sweden)

2006-01-15

Different methods to determine unburned carbon in an ash yield different results, which raises the question of what actually is unburned. Using knowledge on the chemistry of ashes, one can identify which processes that contribute to the results from a method of analysis, but it is not possible to quantify these contributions. The project that is reported here aimed at clarifying what the results from the different methods mean using practical examples. Approximately twenty ash samples have been collected and their content of unburned carbon determined using loss on ignition at different temperatures, instrumental analysis of TOC and wet oxidation (the so-called colorimetric method). In order to identify the processes contributing to the results the samples have been investigated using a thermobalance instrumented with DTA and mass spectrometry for the species released when the samples are heated in air. The results can be grouped according to the type of ash: bottom ash, ESP ashes or baghouse filter ashes. They each have their specific fingerprints. Although the same processes contribute to the LOI, the proportions differ. In the case of bottom ashes, LOI and TOC yield results close to each other. A large part of the LOI is TOC, but not all. TOC is dominated by charred fuel (elementar carbon) and organic is a minor part. In the case of fly ashes, LOI and TOC yield results that differ from each other. As for bottom ashes, a large part of the LOI at 550 deg C is TOC, dominated by char or elemental carbon. The LOI at higher temperatures is often at least double and includes much more. Igniting ESP and baghouse filter ash samples at ca 1000 deg C leads to losses of volatile salts, e g chlorides. The colorimetric method takes some of the TOC, not only organic matter. The TOC methods should be preferred to it. The LOI methods yield values that are generally too high. As they are easy to implement their use will be continued. We recommend that: Ash is not ignited at

Utility Computing: Reality and Beyond

Science.gov (United States)

Ivanov, Ivan I.

Utility Computing is not a new concept. It involves organizing and providing a wide range of computing-related services as public utilities. Much like water, gas, electricity and telecommunications, the concept of computing as public utility was announced in 1955. Utility Computing remained a concept for near 50 years. Now some models and forms of Utility Computing are emerging such as storage and server virtualization, grid computing, and automated provisioning. Recent trends in Utility Computing as a complex technology involve business procedures that could profoundly transform the nature of companies' IT services, organizational IT strategies and technology infrastructure, and business models. In the ultimate Utility Computing models, organizations will be able to acquire as much IT services as they need, whenever and wherever they need them. Based on networked businesses and new secure online applications, Utility Computing would facilitate "agility-integration" of IT resources and services within and between virtual companies. With the application of Utility Computing there could be concealment of the complexity of IT, reduction of operational expenses, and converting of IT costs to variable `on-demand' services. How far should technology, business and society go to adopt Utility Computing forms, modes and models?

Seropositive abdominal and thoracic donor organs are largely underutilized.

Science.gov (United States)

Taylor, R M; Pietroski, R E; Hagan, M; Eisenbrey, A B; Fontana, R J

2010-12-01

The aim of this study was to describe the epidemiology and utilization of anti-hepatitis B core protein(+) and anti-hepatitis C virus(+) organ donor referrals in a large organ procurement organization. Between 1995 and 2006, 3,134 deceased organ donor referrals were tested for anti-HBc and anti-HCV using commercial assays. The prevalence of anti-HCV(+) organ donor referrals significantly increased from 3.4% in 1994-1996 to 8.1% in 2003-2005 (P organ donor referrals remained unchanged at 3%-4% (P = .20). The 112 anti-HBc(+) (3.5%) and 173 anti-HCV(+) (5.5%) organ donor referrals were significantly older and more likely to be noncaucasian than seronegative organ donor referrals (P donor organs were significantly lower compared with seronegative organ donors (P donors over time (21% vs 46%; P = .026), whereas utilization of anti-HCV(+) liver donors remained unchanged over time (5% vs 18%; P = .303). In summary, the proportion of anti-HCV(+) organ donor referrals has significantly increased and the proportion of anti-HBc(+) organ donor referrals has remained stable. Both thoracic and abdominal organs from seropositive donors are largely underutilized. Copyright © 2010 Elsevier Inc. All rights reserved.

A large-scale forest landscape model incorporating multi-scale processes and utilizing forest inventory data

Science.gov (United States)

Wen J. Wang; Hong S. He; Martin A. Spetich; Stephen R. Shifley; Frank R. Thompson III; David R. Larsen; Jacob S. Fraser; Jian. Yang

2013-01-01

Two challenges confronting forest landscape models (FLMs) are how to simulate fine, standscale processes while making large-scale (i.e., .107 ha) simulation possible, and how to take advantage of extensive forest inventory data such as U.S. Forest Inventory and Analysis (FIA) data to initialize and constrain model parameters. We present the LANDIS PRO model that...

The Utilization of High-Frequency Gravitational Waves for Global Communications

Directory of Open Access Journals (Sweden)

Robert M L Baker

2012-10-01

Full Text Available For over 1000 years electromagnetic radiation has been utilized for long-distance communication. Smoke signals, heliographs, telegraphs, telephones and radio have all served our previous communication needs. Nevertheless, electromagnetic radiation has one major difficulty: it is easily absorbed. In this paper we consider a totally different radiation, a radiation that is not easily absorbed: gravitational radiation. Such radiation, like gravity itself, is not absorbed by earth, water or any material substance. In particular we discuss herein means to generate and detect high-frequency gravitational waves or HFGWs, and how they can be utilized for communication. There are two barriers to their practical utilization: they are extremely difficult to generate (a large power required to generate very weak GWs and it is extremely difficult to detect weak GWs. We intend to demonstrate theoretically in this paper their phase-coherent generation utilizing an array of in-phase microelectro-mechanical systems or MEMS resonator elements in which the HFGW flux is proportional to the square of the number of elements. This process solves the transmitter difficulty. Three HFGW detectors have previously been built; but their sensitivity is insufficient for meaningful HFGW reception; greater sensitivity is necessary. A new Li-Baker HFGW detector, discussed herein, is based upon a different measurement technique than the other detectors and is predicted to achieve a sensitivity to satisfy HFGW communication needs.

UTILIZATION OF EVALUATION RESULTS IN LEGAL POLICY-MAKING AND ADMINISTRATION

Directory of Open Access Journals (Sweden)

Hellmut Wollmann

2017-01-01

Full Text Available The article is devoted to the analysis of evaluation method and its impact on legal policy development in governance, including in the area of law enforcement.The author outlines the importance of question whether, when and how the evaluation results of public policies, programs and measures has been utilized (or not utilized in policy making and policy implementation.In the pursuit of this guiding question the article will come in five steps.First, major variants of evaluation will be briefly presented particularly with an eye on their respective “utilization potential”.Second, different concepts will be sketched that have been forwarded to capture the utilization of social science generated knowledge by political, administrative and social actors. The author outlines a detailed description of types of evaluations: a retrospective, prelimi-nary, ongoing, interactive, – as well as existing concepts of application of its results.Third, looking at Germany, Switzerland and the European Union as “cases in point” perti-ent research findings will be discussed. The article also subjected to a detailed analysis of the experience of Germany, Switzerland and the European Union in the field of utilization of evaluation results.Fourth, a summary and conclusion will be given.Fifth, some remarks on pertinent research needs will be made.The author comes to the conclusion that that the rate of the utilization of evaluation-generated knowledge has so far turned out be, by and large, scarce. The author says that re-garding the politically crucial decisions the political rationality and its underlying political will of the decision-makers prevail while concerning less important decisions evaluation-generated evidence does show some effect and, hence, a dose of scientific rationality comes to the fore.There is also a need for further research on the subject of how should (and should not use assessment results when making legal and political decisions.

NONLINEAR DYNAMICS OF CARBON NANOTUBES UNDER LARGE ELECTROSTATIC FORCE

KAUST Repository

Xu, Tiantian

2015-06-01

Because of the inherent nonlinearities involving the behavior of CNTs when excited by electrostatic forces, modeling and simulating their behavior is challenging. The complicated form of the electrostatic force describing the interaction of their cylindrical shape, forming upper electrodes, to lower electrodes poises serious computational challenges. This presents an obstacle against applying and using several nonlinear dynamics tools typically used to analyze the behavior of complicated nonlinear systems undergoing large motion, such as shooting, continuation, and integrity analysis techniques. This works presents an attempt to resolve this issue. We present an investigation of the nonlinear dynamics of carbon nanotubes when actuated by large electrostatic forces. We study expanding the complicated form of the electrostatic force into enough number of terms of the Taylor series. Then, we utilize this form along with an Euler-Bernoulli beam model to study for the first time the dynamic behavior of CNTs when excited by large electrostatic force. The geometric nonlinearity and the nonlinear electrostatic force are considered. An efficient reduced-order model (ROM) based on the Galerkin method is developed and utilized to simulate the static and dynamic responses of the CNTs. Several results are generated demonstrating softening and hardening behavior of the CNTs near their primary and secondary resonances. The effects of the DC and AC voltage loads on the behavior have been studied. The impacts of the initial slack level and CNT diameter are also demonstrated.

Nonlinear Dynamics of Carbon Nanotubes Under Large Electrostatic Force

KAUST Repository

Xu, Tiantian

2015-06-01

Because of the inherent nonlinearities involving the behavior of CNTs when excited by electrostatic forces, modeling and simulating their behavior is challenging. The complicated form of the electrostatic force describing the interaction of their cylindrical shape, forming upper electrodes, to lower electrodes poises serious computational challenges. This presents an obstacle against applying and using several nonlinear dynamics tools typically used to analyze the behavior of complicated nonlinear systems undergoing large motion, such as shooting, continuation, and integrity analysis techniques. This works presents an attempt to resolve this issue. We present an investigation of the nonlinear dynamics of carbon nanotubes when actuated by large electrostatic forces. We study expanding the complicated form of the electrostatic force into enough number of terms of the Taylor series. Then, we utilize this form along with an Euler-Bernoulli beam model to study for the first time the dynamic behavior of CNTs when excited by large electrostatic force. The geometric nonlinearity and the nonlinear electrostatic force are considered. An efficient reduced-order model (ROM) based on the Galerkin method is developed and utilized to simulate the static and dynamic responses of the CNTs. Several results are generated demonstrating softening and hardening behavior of the CNTs near their primary and secondary resonances. The effects of the DC and AC voltage loads on the behavior have been studied. The impacts of the initial slack level and CNT diameter are also demonstrated.

Utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information

Science.gov (United States)

2009-01-01

This report describes a study conducted to explore the utility and recognition of lines and linear patterns on electronic displays depicting aeronautical charting information. The study gathered data from a large number of pilots who conduct all type...

A novel iron-lead redox flow battery for large-scale energy storage

Science.gov (United States)

Zeng, Y. K.; Zhao, T. S.; Zhou, X. L.; Wei, L.; Ren, Y. X.

2017-04-01

The redox flow battery (RFB) is one of the most promising large-scale energy storage technologies for the massive utilization of intermittent renewables especially wind and solar energy. This work presents a novel redox flow battery that utilizes inexpensive and abundant Fe(II)/Fe(III) and Pb/Pb(II) redox couples as redox materials. Experimental results show that both the Fe(II)/Fe(III) and Pb/Pb(II) redox couples have fast electrochemical kinetics in methanesulfonic acid, and that the coulombic efficiency and energy efficiency of the battery are, respectively, as high as 96.2% and 86.2% at 40 mA cm-2. Furthermore, the battery exhibits stable performance in terms of efficiencies and discharge capacities during the cycle test. The inexpensive redox materials, fast electrochemical kinetics and stable cycle performance make the present battery a promising candidate for large-scale energy storage applications.

Very large virtual compound spaces: construction, storage and utility in drug discovery.

Science.gov (United States)

Peng, Zhengwei

2013-09-01

Recent activities in the construction, storage and exploration of very large virtual compound spaces are reviewed by this report. As expected, the systematic exploration of compound spaces at the highest resolution (individual atoms and bonds) is intrinsically intractable. By contrast, by staying within a finite number of reactions and a finite number of reactants or fragments, several virtual compound spaces have been constructed in a combinatorial fashion with sizes ranging from 10(11)11 to 10(20)20 compounds. Multiple search methods have been developed to perform searches (e.g. similarity, exact and substructure) into those compound spaces without the need for full enumeration. The up-front investment spent on synthetic feasibility during the construction of some of those virtual compound spaces enables a wider adoption by medicinal chemists to design and synthesize important compounds for drug discovery. Recent activities in the area of exploring virtual compound spaces via the evolutionary approach based on Genetic Algorithm also suggests a positive shift of focus from method development to workflow, integration and ease of use, all of which are required for this approach to be widely adopted by medicinal chemists.

[Health services' utilization patterns in Catalonia, Spain].

Science.gov (United States)

Medina, Carmen; Salvador, Xavier; Faixedas, M Teresa; Gallo, Pedro

2011-12-01

The purpose of this article is disclose services utilization patterns among the Catalan population with particular emphasis on primary care, specialised care, hospital care and emergency care. A number of logistic regression models were used to explain the utilization of the various types of services. Variables in the analysis included self-perceived need, lifestyles, and sociodemographic variables. Separate analyses were performed for male, female, adults, and children as well as for the general population. Women use all types of services more often than men. Children and people over 64 are more frequent users of primary care. Primary care is also associated to lower socioeconomic conditions. Young adults and the migrant population in general are found to be under users of services, except of emergency care services. The use of specialised care is associated to the better-off, to those with university level education attainment, individual private insurance, and those living in the city of Barcelona. Hospital care is largely associated to need variables. The use of health services is explained by self-perceived need as well as by demographic, socioeconomic and geographical factors. Copyright © 2011 Elsevier España S.L. All rights reserved.

Economical Utilization of Associated Gas in Nigeria

Directory of Open Access Journals (Sweden)

Lukman Obayopo Alimi

2014-07-01

Full Text Available Oil production is often accompanied by associated natural gas as valuable by-product of oil processing. Large amount of this vital energy component is flared during these processes, mostly in developing countries. For a longer period of time more gas is flares in Nigeria than anywhere else in Africa and second to Russian in the world, with daily estimates of roughly 2.5 billion cubic feet. This is equivalent to around 40% of all Africa´s natural gas consumption, and annual financial loss to Nigeria is about 1.8 billion Euros. Gas flaring contributes to major environmental pollution problems, which affects oil producing areas of the Niger Delta in Nigeria. This research attempts to look into the environmental issues in the region and proposes possible solutions, with recommendations that will contribute to improve associated gas utilization. This study describes gas to liquid (GTL conversion technology as a sustainable option to utilize associated gas in Nigeria, and also evaluates the economic attractiveness of the process. This conversion technology could contribute to total elimination of gas flaring and reduces the overdependence on importation of refined products (petrol, diesel and kerosene from foreign countries into Nigeria.

Experiences on operation, maintenance and utilization in JRR-2

International Nuclear Information System (INIS)

1994-08-01

The Japan Research Reactor No.2 (JRR-2) is a high performance 10 MW multi purpose research reactor, heavy water moderated and cooled enriched uranium fuel used. Since the first criticality was attained in October, 1960, JRR-2 has been operated to satisfy the utilization demands, such as irradiation of fuel and materials, neutron beam experiments, radio isotope production and B.N.C.T (Boron Neutron Capture Therapy). During the operation, various kinds of troubles mainly caused by the old design concept had been occurred at the JRR-2 systems and components. Those troubles were solved with adequate countermeasures of timely repairs and large scale modifications with newest techniques. The works above were completely carried out by the staff of JRR-2 and related divisions. As a result, JRR-2 became one of the oldest research reactors which are still under operation in the world. Since JRR-2 has been utilized for more than 30 years, the operation mode was changed from 12 days-one cycle to 3 days-one cycle in April, 1994, taking into consideration aging of the reactor systems. In this paper, the experiences of JRR-2 for more than 30 years such as operation, maintenance, repair, modifications and utilization on JRR-2 are described. (author)

Fundamental study of low-NOx combustion fly ash utilization

International Nuclear Information System (INIS)

Suuberg, Eric M.; Hurt, Robert H.

1998-01-01

This study is principally concerned with characterizing the organic part of coal combustion fly ashes. High carbon fly ashes are becoming more common as by-products of low-NOx combustion technology, and there is need to learn more about this fraction of the fly ash. The project team consists of two universities, Brown and Princeton, and an electrical utility, New England Power. A sample suite of over fifty fly ashes has been gathered from utilities across the United States, and includes ashes from a coals ranging in rank from bituminous to lignite. The characterizations of these ashes include standard tests (LOI, Foam Index), as well as more detailed characterizations of their surface areas, porosity, extractability and adsorption behavior. The ultimate goal is, by better characterizing the material, to enable broadening the range of applications for coal fly ash re-use beyond the current main market as a pozzolanic agent for concretes. The potential for high carbon-content fly ashes to substitute for activated carbons is receiving particular attention. The work performed to date has already revealed how very different the surfaces of different ashes produced by the same utility can be, with respect to polarity of the residual carbon. This can help explain the large variations in acceptability of these ashes as concrete additives

Summary of tower designs for large horizontal axis wind turbines

Science.gov (United States)

Frederick, G. R.; Savino, J. M.

1986-01-01

Towers for large horizontal axis wind turbines, machines with a rotor axis height above 30 meters and rated at more than 500 kW, have varied in configuration, materials of construction, type of construction, height, and stiffness. For example, the U.S. large HAWTs have utilized steel truss type towers and free-standing steel cylindrical towers. In Europe, the trend has been to use only free-standing and guyed cylindrical towers, but both steel and reinforced concrete have been used as materials of construction. These variations in materials of construction and type of construction reflect different engineering approaches to the design of cost effective towers for large HAWTs. Tower designs are the NASA/DOE Mod-5B presently being fabricated. Design goals and requirements that influence tower configuration, height and materials are discussed. In particular, experiences with United States large wind turbine towers are elucidated. Finally, current trends in tower designs for large HAWTs are highlighted.

Modeling of large-scale oxy-fuel combustion processes

DEFF Research Database (Denmark)

Yin, Chungen

2012-01-01

Quite some studies have been conducted in order to implement oxy-fuel combustion with flue gas recycle in conventional utility boilers as an effective effort of carbon capture and storage. However, combustion under oxy-fuel conditions is significantly different from conventional air-fuel firing......, among which radiative heat transfer under oxy-fuel conditions is one of the fundamental issues. This paper demonstrates the nongray-gas effects in modeling of large-scale oxy-fuel combustion processes. Oxy-fuel combustion of natural gas in a 609MW utility boiler is numerically studied, in which...... calculation of the oxy-fuel WSGGM remarkably over-predicts the radiative heat transfer to the furnace walls and under-predicts the gas temperature at the furnace exit plane, which also result in a higher incomplete combustion in the gray calculation. Moreover, the gray and non-gray calculations of the same...

Measurement of utility.

Science.gov (United States)

Thavorncharoensap, Montarat

2014-05-01

The Quality Adjusted Life Year (QALY) is the most widely recommended health outcome measure for use in economic evaluations. The QALY gives a value to the effect of a given health intervention in terms of both quantity and quality. QALYs are calculated by multiplying the duration of time spent in a given health state, in years, by the quality of life weighted, known as utility. Utility can range from 0 (the worst health state-the equivalent of death) to 1 (the best health state-full health). This paper provides an overview of the various methods that can be used to measure utility and outlines the recommended protocol for measuring utility, as described in the Guidelines for Health Technology Assessment in Thailand (second edition). The recommendations are as follows: Wherever possible, primary data collection using EQ-5D-3L in patients using Thai value sets generated from the general public should be used. Where the EQ-5D-3L is considered inappropriate, other methods such as Standard gamble (SG), Time-trade-off (TTO), Visual analogue scale (VAS), Health Utilities Index (HUI), SF-6D, or Quality of well being (QWB) can be used. However, justification and full details on the chosen instrument should always be provided.

Utilization of detrital complexes by the oyster, Crassostrea virginica (Gmelin)

International Nuclear Information System (INIS)

Crosby, M.P.

1987-01-01

The contribution of bacteria and nonliving particulate organic matter of detrital complexes to the nutrition of the American oyster, Crassostrea virginica, was investigated in the laboratory under normal feeding conditions. Results indicate the oysters were capable of assimilating crude fiber extracted from 14 C-Spartina alterniflora with an efficiency of approximately 3% and that enteric bacteria did not enhance this process. Less than 1% of an oyster's energetic demands could be met by direct utilization of this substrate, in the Choptank River subestuary of the Chesapeake Bay. The potential contribution of refractory organics to oysters in large salt marshes having crude fiber concentration greater than in the Choptank system, are discussed. The ability of the oyster to utilize 14 C and 15 N from cellulolytic marine bacteria, isolated from a S. alterniflora dominated salt marsh, was also studied

New record in peat utilization

International Nuclear Information System (INIS)

Anon.

1992-01-01

Increment of peat utilization that started in 1990 continued also in 1991, due to which new record was achieved. Peat delivery increased 11.2 % from 16.1 million m 3 in 1990 to 17.9 million m 3 in 1991. The portion of energy peat was 16.4 million m 3 , and the portion of peat for other purposes 1.5 million m 3 . The energy content of fuel peat was 15.8 TWh, of which 13.8 TWh was milled peat and 2.0 TWh sod peat. The main portion of energy peat was used in communal back-pressure power plants for production of electricity and district heat. The second largest utilizer was industry. The rests 0.3 TWh (2 %) was delivered to private small scale utilization and export. About 88 000 MWh of sod peat was exported to Sweden. The portion of horticultural peat of the peat delivered for other purposes than energy production was 662 000 m 3 , of which only 260 000 m 3 was used in Finland and 408 000 m 3 was exported. Agriculture is the main user of peat outside the energy production. Weakly humified peat was used as litter and as absorber for slurrified manure about 286 000 m 3 . The value of the deliveries of peat industry exeeded 800 million FIM, of which the portion of milled peat was about 650 million FIM, the portion of sod peat about 95 million FIM, and the portion of domestic deliveries of horticultural peat 30 million FIM. The export of peat was 36 million FIM. Peat production in 1991 was 10.605 million m 3 , which is nearly a half of the production of 1990. The decrease was caused by both poor weather of may-june 1991 and the large peat supplies from the year 1990. About 60 % of the production target of 1991 was achieved. The production of sod peat increased by over 50 % from 736 000 m 3 in 1990 to 1 147 000 m 3 in 1991

Survey and research for the enhancement of large-scale technology development 1. Japan's large-scale technology development and the effects; Ogata gijutsu kaihatsu suishin no tame no chosa kenkyu. 1. Nippon no daikibo gijutsu kaihatsu to sono koka

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

A survey is conducted into the effects of projects implemented under the large-scale industrial technology research and development system. In the development of 'ultraperformance computers,' each of the technologies is being widely utilized, and the data service system of Nippon Telegraph and Telephone Public Corporation and the large computer (HITAC8800) owe much for their success to the fruits of the development endeavor. In the development of the 'desulfurization technology,' the fruits are in use by Tokyo Electric Power Co., Inc., and Chubu Electric Power Co., Inc., incorporated into their desulfurization systems. Although there is no practical plant based on the 'great-depth remotely controlled submarine oil drilling rig,' yet oceanic technologies and control methods are being utilized in various fields. The 'seawater desalination and by-product utilization' technologies have enabled the establishment of technologies of the top level in the world thanks to the resultant manufacture of concrete evaporator and related technologies. Eleven plants have been completed utilizing the fruits of the development. In the field of 'electric vehicle,' there is no commercialization in progress due to problems in cost effectiveness though remarkable improvement has been achieved in terms of performance. Technologies about weight reduction, semiconductor devices, battery parts and components, etc., are being utilized in many fields. (NEDO)

Integrating photovoltaics into utility distribution systems

International Nuclear Information System (INIS)

Zaininger, H.W.; Barnes, P.R.

1995-01-01

Electric utility distribution system impacts associated with the integration of distributed photovoltaic (PV) energy sources vary from site to site and utility to utility. The objective of this paper is to examine several utility- and site-specific conditions which may affect economic viability of distributed PV applications to utility systems. Assessment methodology compatible with technical and economic assessment techniques employed by utility engineers and planners is employed to determine PV benefits for seven different utility systems. The seven case studies are performed using utility system characteristics and assumptions obtained from appropriate utility personnel. The resulting site-specific distributed PV benefits increase nonsite-specific generation system benefits available to central station PV plants as much as 46%, for one utility located in the Southwest

Detectors for large e/sup +/e/sup -/ colliders

International Nuclear Information System (INIS)

Baltay, C.

1986-01-01

In this paper the author gives a brief review of the detectors now being built for the two new large e/sup +/e/sup -/ colliders, LEP, under construction at CERN, and the SLC, now under construction at SLAC. These colliders are intended to study the Z 0 energy region and above, with energies of around 100 to 200 GeV in the center of mass. The purpose of this paper is to list some of the physics topics of interest and given an indication of the requirements they make on the design of the detectors. It also contains a brief discussion giving some of the relevant parameters of the colliers, and gives a description of the large detectors now under construction to utilize these colliders

SYMPAL: utilities guide

International Nuclear Information System (INIS)

Simpson, J.A.; Sublet, J.-Ch.

1997-02-01

The processing code SYMPAL is used to perform the data treatment for creating a new version of the European Activation File (EAF). The entire process is handled by different modules of the code in a sequential and orderly manner. The modular code system accesses, translates and processes cross section data from a wide variety of libraries and calculations with nuclear model codes. Two major data bases are accessed and merged so as to create a new library version. The Master Data File (MDF) contains the original cross section data extracted, unmodified but reformatted, from numerous sources. The Master Parameter File (MPF) contains a compilation of all physical information necessary to renormalise, split and internally validate any particular type of cross section. The combination of these two files generates a new activation library in pointwise and various groupwise formats. The SYMPAL utilities guide describes a set of programs developed to handle certain aspects of the procedure done outside of the main processing tasks. These include counting, translating, selecting and plotting data streams. Special printing and plotting procedures have been written to handle the large amounts of information present in activation libraries. (author)

Issues related to gas use by European power utilities

International Nuclear Information System (INIS)

Jonchere, J.P.

1992-01-01

Gas-fired combined cycle frequently appears as a least-cost option for newly built power plants. Moreover, this option also brings obvious environmental benefits. But, power utilities, facing unavoidable long term uncertainties about electricity demand are not at ease with long term commitments such a a take-or-pay formula or a price indexation not reflecting the market place in the power generation industry. Due to the flexibilities in the management of existing power plants (deferred closures, etc...) or even on the demand side (load shifting, peak clipping, etc...), early decision making is not compulsory. Therefore, a gas breakthrough in the power sector interfuel competition will require a mutual understanding of constraints and flexibilities faced by partners: gas sellers and power utilities. A fair rent sharing between them would certainly be a prerequisite to a large but possibly temporary access of natural gas to the European power sector. 4 refs., 1 fig., 2 tabs

Market research for electric utilities

International Nuclear Information System (INIS)

Shippee, G.

1999-01-01

Marketing research is increasing in importance as utilities become more marketing oriented. Marketing research managers need to maintain autonomy from the marketing director or ad agency and make sure their work is relevant to the utility's operation. This article will outline a model marketing research program for an electric utility. While a utility may not conduct each and every type of research described, the programs presented offer a smorgasbord of activities which successful electric utility marketers often use or have access to

Under stochastic dominance choquet-expected utility and anticipated utility are identical

NARCIS (Netherlands)

Wakker, P.P.

1990-01-01

The aim of this paper is to convince the reader that Choquet-expected utility, as initiated by Schmeidler (1982) for decision making under uncertainty, when formulated for decision making under risk naturally leads to Yaari (1987)'s anticipated utility. Thus the two generalizations of expected

On-demand Overlay Networks for Large Scientific Data Transfers

Energy Technology Data Exchange (ETDEWEB)

Ramakrishnan, Lavanya [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Guok, Chin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jackson, Keith [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kissel, Ezra [Univ. of Delaware, Newark, DE (United States); Swany, D. Martin [Univ. of Delaware, Newark, DE (United States); Agarwal, Deborah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2009-10-12

Large scale scientific data transfers are central to scientific processes. Data from large experimental facilities have to be moved to local institutions for analysis or often data needs to be moved between local clusters and large supercomputing centers. In this paper, we propose and evaluate a network overlay architecture to enable highthroughput, on-demand, coordinated data transfers over wide-area networks. Our work leverages Phoebus and On-demand Secure Circuits and AdvanceReservation System (OSCARS) to provide high performance wide-area network connections. OSCARS enables dynamic provisioning of network paths with guaranteed bandwidth and Phoebus enables the coordination and effective utilization of the OSCARS network paths. Our evaluation shows that this approach leads to improved end-to-end data transfer throughput with minimal overheads. The achievedthroughput using our overlay was limited only by the ability of the end hosts to sink the data.

Market research for electric utilities

Energy Technology Data Exchange (ETDEWEB)

Shippee, G.

1999-12-01

Marketing research is increasing in importance as utilities become more marketing oriented. Marketing research managers need to maintain autonomy from the marketing director or ad agency and make sure their work is relevant to the utility's operation. This article will outline a model marketing research program for an electric utility. While a utility may not conduct each and every type of research described, the programs presented offer a smorgasbord of activities which successful electric utility marketers often use or have access to.

Fiber supercapacitors utilizing pen ink for flexible/wearable energy storage.

Science.gov (United States)

Fu, Yongping; Cai, Xin; Wu, Hongwei; Lv, Zhibin; Hou, Shaocong; Peng, Ming; Yu, Xiao; Zou, Dechun

2012-11-08

A novel type of flexible fiber/wearable supercapacitor that is composed of two fiber electrodes - a helical spacer wire and an electrolyte - is demonstrated. In the carbon-based fiber supercapacitor (FSC), which has high capacitance performance, commercial pen ink is directly utilized as the electrochemical material. FSCs have potential benefits in the pursuit of low-cost, large-scale, and efficient flexible/wearable energy storage systems. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fiber supercapacitors utilizing pen ink for flexible/wearable energy storage

Energy Technology Data Exchange (ETDEWEB)

Fu, Yongping; Cai, Xin; Wu, Hongwei; Lv, Zhibin; Hou, Shaocong; Peng, Ming; Yu, Xiao; Zou, Dechun [Beijing National Laboratory for Molecular Sciences, Key Laboratory of Polymer Chemistry and Physics of the Ministry of Education, College of Chemistry and Molecular Engineering, Peking University, Beijing (China)

2012-11-08

A novel type of flexible fiber/wearable supercapacitor that is composed of two fiber electrodes - a helical spacer wire and an electrolyte - is demonstrated. In the carbon-based fiber supercapacitor (FSC), which has high capacitance performance, commercial pen ink is directly utilized as the electrochemical material. FSCs have potential benefits in the pursuit of low-cost, large-scale, and efficient flexible/wearable energy storage systems. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

A Multicast Protocol Utilizing On-demand Routing Strategy for MPRN

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

This paper proposes a multicast protocol utilizing ondemand routing strategy for mobile packet radio network. It does not maintain permanent route tables with full topological views. Instead, multicast senders apply on-demand procedures to dynamically discover routes and build forwarding group in this protocol. The data packets are propagated by each forwarding group member via scoped flooding, so the protocol can reduce network bandwidth overhead and avoid the propagation of potentially large routing updates throughout the network.

Using Flipped Classroom Approach to Explore Deep Learning in Large Classrooms

Science.gov (United States)

Danker, Brenda

2015-01-01

This project used two Flipped Classroom approaches to stimulate deep learning in large classrooms during the teaching of a film module as part of a Diploma in Performing Arts course at Sunway University, Malaysia. The flipped classes utilized either a blended learning approach where students first watched online lectures as homework, and then…

CRNL active waste incinerator

International Nuclear Information System (INIS)

McQuade, D.W.

1965-02-01

At CRNL the daily collection of 1200 pounds of active combustible waste is burned in a refractory lined multi-chamber incinerator. Capacity is 500-550 pounds per hour; volume reduction 96%. Combustion gases are cooled by air dilution and decontaminated by filtration through glass bags in a baghouse dust collector. This report includes a description of the incinerator plant, its operation, construction and operating costs, and recommendations for future designs. (author)

Utility requirements for fusion

International Nuclear Information System (INIS)

Vondrasek, R.J.

1982-02-01

This report describes work done and results obtained during performance of Task 1 of a study of Utility Requirements and Criteria for Fusion Options. The work consisted of developing a list of utility requirements for fusion optics containing definition of the requirements and showing their relative importance to the utility industry. The project team members developed a preliminary list which was refined by discussions and literature searches. The refined list was recast as a questionnaire which was sent to a substantial portion of the utility industry in this country. Forty-three questionnaire recipients responded including thirty-two utilities. A workshop was held to develop a revised requirements list using the survey responses as a major input. The list prepared by the workshop was further refined by a panel consisting of vice presidents of the three project team firms. The results of the study indicate that in addition to considering the cost of energy for a power plant, utilities consider twenty-three other requirements. Four of the requirements were judged to be vital to plant acceptability: Plant Capital Cost, Financial Liability, Plant Safety and Licensability

Under stochastic dominance Choquet-expected utility and anticipated utility are identical

NARCIS (Netherlands)

P.P. Wakker (Peter)

1990-01-01

textabstractThe aim of this paper is to convince the reader that Choquet-expected utility, as initiated by Schmeidler (1982, 1989) for decision making under uncertainty, when formulated for decision making under risk naturally leads to anticipated utility, as initiated by Quiggin/Yaari. Thus the two

Computer-based data acquisition system in the Large Coil Test Facility

International Nuclear Information System (INIS)

Gould, S.S.; Layman, L.R.; Million, D.L.

1983-01-01

The utilization of computers for data acquisition and control is of paramount importance on large-scale fusion experiments because they feature the ability to acquire data from a large number of sensors at various sample rates and provide for flexible data interpretation, presentation, reduction, and analysis. In the Large Coil Test Facility (LCTF) a Digital Equipment Corporation (DEC) PDP-11/60 host computer with the DEC RSX-11M operating system coordinates the activities of five DEC LSI-11/23 front-end processors (FEPs) via direct memory access (DMA) communication links. This provides host control of scheduled data acquisition and FEP event-triggered data collection tasks. Four of the five FEPs have no operating system

Impact of Utility-Scale Distributed Wind on Transmission-Level System Operations

Energy Technology Data Exchange (ETDEWEB)

Brancucci Martinez-Anido, C.; Hodge, B. M.

2014-09-01

This report presents a new renewable integration study that aims to assess the potential for adding distributed wind to the current power system with minimal or no upgrades to the distribution or transmission electricity systems. It investigates the impacts of integrating large amounts of utility-scale distributed wind power on bulk system operations by performing a case study on the power system of the Independent System Operator-New England (ISO-NE).

The effect of an enhanced employee assistance program (EAP) intervention on EAP utilization.

Science.gov (United States)

Zarkin, G A; Bray, J W; Karuntzos, G T; Demiralp, B

2001-05-01

An enhanced employee assistance program (EAP) intervention was developed that delivers comprehensive EAP outreach services to all employees who may have alcohol-related and other workplace problems; standard EAP materials traditionally targeted at white men were enhanced to include women and minorities. This study evaluates whether the enhanced EAP intervention increased EAP utilization. The enhanced EAP intervention was developed at a large community-based not-for-profit EAP located in Rockford, Illinois. Two primary worksites and 16 other newly contracted worksites received the enhanced EAP intervention and served as intervention sites; the 107 other worksites serviced by the EAP were used as comparison sites. We used time series data from 1991 to 1998 and included repeated measures on each firm's quarterly EAP utilization. The enhanced EAP intervention increased the mean number of women and minority cases per worksite by 58%, white male cases by 45% and total EAP cases by 53%. This study shows that, for a modest cost, the enhanced EAP intervention successfully increased utilization of EAP by all employees, especially utilization by women and minority employees. It also shows that traditional EAP services and outreach materials can be made more appealing to women and minorities without adversely affecting their utilization by white men.

Utilization of waste as biogas substrateby dominan microbes identified

Science.gov (United States)

Nurlina, E.; Sambasri, S.; Hartati, E.; Safitri, R.; Hodijat, A.

2018-05-01

Indonesia as the tropics have a source of biomass feedstock which is very large, so the waste biomass can be used optimally as an energy source in the form of biogas. This study was conducted to obtain alternative energy from domestic waste materials, given the limited availability of petroleum and natural gas sourced from fossil fuels. This methodology is an experimental method, the process conditions at room temperature 25-27 °C, pH adjusted to the growth of microbes to produce biogas, retention time 20-60 days, the bioreactor is operated with a batch system, the volume of waste in the bioreactor is made permanent, so that the production of biogas in large scale will increase the pressure inside the bioreactor. Biogas is formed accommodated then distributed to the stove. Factors that determine the formation of biogas is a microbial species capable methanogens convert acetate into biogas. From the results of microbial identification of the isolates in the bioreactor, has identified three types of bacteria methanogens namely Methanospirillum hungatei, Methanobacterium polustre and Methanolacinapoynteri. The results of this study, domestic waste can be utilized as a substrate in biogas production, with the highest methane composition reaches 50.79%. This result is expected to increase public knowledge to utilize the waste into biogas as a renewable energy to sufficient the energy needs of household, so it does not depend on the energy derived from fossil fuels.

Utilization management in anatomic pathology.

Science.gov (United States)

Lewandrowski, Kent; Black-Schaffer, Steven

2014-01-01

There is relatively little published literature concerning utilization management in anatomic pathology. Nonetheless there are many utilization management opportunities that currently exist and are well recognized. Some of these impact only the cost structure within the pathology department itself whereas others reduce charges for third party payers. Utilization management may result in medical legal liabilities for breaching the standard of care. For this reason it will be important for pathology professional societies to develop national utilization guidelines to assist individual practices in implementing a medically sound approach to utilization management. © 2013.

Portuguese pellets market: Analysis of the production and utilization constrains

International Nuclear Information System (INIS)

Monteiro, Eliseu; Mantha, Vishveshwar; Rouboa, Abel

2012-01-01

As opposite in Portugal, the wood pellets market is booming in Europe. In this work, possible reasons for this market behavior are foreseen according to the key indicators of biomass availability, costs and legal framework. Two major constrains are found in the Portuguese pellets market: the first one is the lack of an internal consumption, being the market based on exportations. The second one is the shortage of raw material mainly due to the competition with the biomass power plants. Therefore, the combination of the biomass power plants with pellet production plants seems to be the best option for the pellets production in the actual Portuguese scenario. The main constrains for pellets market has been to convince small-scale customers that pellets are a good alternative fuel, mainly due to the investment needed and the strong competition with natural gas. Besides some benefits in the acquisition of new equipment for renewable energy, they are insufficient to cover the huge discrepancy of the investment in pellets heating. However, pellets are already economic interesting for large utilizations. In order cover a large amount of households, additional public support is needed to cover the supplementary costs of the pellets heating systems. - Highlights: ► There is a lack of internal consumption being the pellets market based on exportation. ► The shortage of raw material is mainly due to the biomass power plants. ► Combining pellet plants with biomass power plants seems to be a wise solution. ► The tax benefits of renewable energy equipments are not enough to cover the higher investment. ► Pellets are already economic interesting for large utilizations in the Portuguese scenario.

Utility survey on nuclear power plant siting and nuclear energy centers

International Nuclear Information System (INIS)

Cope, D.F.; Bauman, H.F.

1977-01-01

Most of the large U.S. utilities were surveyed by telephone and mail on questions concerning nuclear power plant siting and nuclear energy centers (NECs). The main purpose of the survey was for guidance of ERDA's NEC program. The questions covered the following topics: availability of sites; impact of environmental and other restraints; plans for development of multi-unit sites; interest in NEC development; interest in including fuel-cycle facilities in NECs; and opinions on the roles desired for the state and Federal governments in power plant siting. The main conclusion of the survey was that, while many utilities were considering multiple-unit sites of 2 to 5 units, none were planning larger energy centers at the present time. However, several expressed interest in NECs as a long-range future development

Using Stochastic Frontier Analysis to Analyze Adjustment Costs and Investment Utilization

DEFF Research Database (Denmark)

Olsen, Jakob Vesterlund; Henningsen, Arne

of additional inputs and an initially incomplete investment utilization results in an output level that is temporarily not at its maximum. We estimate an output distance function as a stochastic "Efficiency Effects Frontier" model (Battese & Coelli 1995), where the estimated technical inefficiencies...... are explained with current and lagged investments, farm size, age of the farmer, and interaction terms between these variables. Furthermore, we derive the formula for calculating the marginal effects on technical efficiency for "Efficiency Effects Frontier" models so that we can calculate the (marginal) effect...... of current and past investments on technical efficiency, which we interpret as adjustment costs and temporary incomplete investment utilization. We apply this methodology to a large panel data set of Danish pig producers with 9,281 observations between 1996 and 2008. The results show that investments have...

A large animal model for boron neutron capture therapy

International Nuclear Information System (INIS)

Gavin, P.R.; Kraft, S.L.; DeHaan, C.E.; Moore, M.P.; Griebenow, M.L.

1992-01-01

An epithermal neutron beam is needed to treat relatively deep seated tumors. The scattering characteristics of neutrons in this energy range dictate that in vivo experiments be conducted in a large animal to prevent unacceptable total body irradiation. The canine species has proven an excellent model to evaluate the various problems of boron neutron capture utilizing an epithermal neutron beam. This paper discusses three major components of the authors study: (1) the pharmacokinetics of borocaptate sodium (NA 2 B 12 H 11 SH or BSH) in dogs with spontaneously occurring brain tumors, (2) the radiation tolerance of normal tissues in the dog using an epithermal beam alone and in combination with borocaptate sodium, and (3) initial treatment of dogs with spontaneously occurring brain tumors utilizing borocaptate sodium and an epithermal neutron beam

Privatization of municipal electrical utilities

International Nuclear Information System (INIS)

Carr, J.

1998-01-01

The challenges and special issues which arise through the sale of a municipal electric utility were discussed. The recent sales of two utilities, the Kentville Electric Commission in Nova Scotia and Cornwall Electric in Ontario, were used as examples to show how the sale of an electric utility differs from the sale of most business enterprises. Municipal utilities are integral parts of the communities they serve which introduces several complexities into the sale. Factors that require special attention in the sale of the utilities, including electricity rates, local accountability, treatment of employees and local economic development, and the need for a comprehensive communication program to deal with the substantial public interest that sale of a municipal utility will engender, were reviewed

Climate change adaptation in regulated water utilities

Science.gov (United States)

Vicuna, S.; Melo, O.; Harou, J. J.; Characklis, G. W.; Ricalde, I.

2017-12-01

Concern about climate change impacts on water supply systems has grown in recent years. However, there are still few examples of pro-active interventions (e.g. infrastructure investment or policy changes) meant to address plausible future changes. Deep uncertainty associated with climate impacts, future demands, and regulatory constraints might explain why utility planning in a range of contexts doesn't explicitly consider climate change scenarios and potential adaptive responses. Given the importance of water supplies for economic development and the cost and longevity of many water infrastructure investments, large urban water supply systems could suffer from lack of pro-active climate change adaptation. Water utilities need to balance the potential for high regret stranded assets on the one side, with insufficient supplies leading to potentially severe socio-economic, political and environmental failures on the other, and need to deal with a range of interests and constraints. This work presents initial findings from a project looking at how cities in Chile, the US and the UK are developing regulatory frameworks that incorporate utility planning under uncertainty. Considering for example the city of Santiago, Chile, recent studies have shown that although high scarcity cost scenarios are plausible, pre-emptive investment to guard from possible water supply failures is still remote and not accommodated by current planning practice. A first goal of the project is to compare and contrast regulatory approaches to utility risks considering climate change adaptation measures. Subsequently we plan to develop and propose a custom approach for the city of Santiago based on lessons learned from other contexts. The methodological approach combines institutional assessment of water supply regulatory frameworks with simulation-based decision-making under uncertainty approaches. Here we present initial work comparing the regulatory frameworks in Chile, UK and USA evaluating

Large-scale demonstration of D ampersand D technologies

International Nuclear Information System (INIS)

Bhattacharyya, S.K.; Black, D.B.; Rose, R.W.

1997-01-01

It is becoming increasingly evident that new technologies will need to be utilized for decontamination and decommissioning (D ampersand D) activities in order to assure safe and cost effective operations. The magnitude of the international D ampersand D problem is sufficiently large in anticipated cost (100's of billions of dollars) and in elapsed time (decades), that the utilization of new technologies should lead to substantial improvements in cost and safety performance. Adoption of new technologies in the generally highly contaminated D ampersand D environments requires assurances that the technology will perform as advertised. Such assurances can be obtained from demonstrations of the technology in environments that are similar to the actual environments without being quite as contaminated and hazardous. The Large Scale Demonstration Project (LSDP) concept was designed to provide such a function. The first LSDP funded by the U.S. Department Of Energy's Environmental Management Office (EM) was on the Chicago Pile 5 (CP-5) Reactor at Argonne National Laboratory. The project, conducted by a Strategic Alliance for Environmental Restoration, has completed demonstrations of 10 D ampersand D technologies and is in the process of comparing the performance to baseline technologies. At the conclusion of the project, a catalog of performance comparisons of these technologies will be developed that will be suitable for use by future D ampersand D planners

Utility-sized Madaras wind plants

Science.gov (United States)

Whitford, D. H.; Minardi, J. E.

1981-01-01

An analysis and technological updating were conducted for the Madaras Rotor Power Plant concept, to determine its ability to compete both technically and economically with horizontal axis wind turbine generators currently under development. The Madaras system uses large cylinders rotating vertically atop each regularly spaced flatcar of a train to propel them, by means of Magnus-effect interaction with the wind, along a circular or oval track. Alternators geared to the wheels of each car generate electrical power, which is transmitted to a power station by a trolley system. The study, consisting of electromechanical design, wind tunnel testing, and performance and cost analyses, shows that utility-sized plants greater than 228 MW in capacity and producing 975,000 kWh/year are feasible. Energy costs for such plants are projected to be between 22% lower and 12% higher than horizontal axis turbine plants of comparable output.

Regulator preferences and utility prices: evidence from natural gas distribution utilities

International Nuclear Information System (INIS)

Klein, C.C.; Sweeney, G.H.

1999-01-01

We investigate the determinants of regulators' relative weighting of the social welfare of customer groups and utilities using panel data on natural gas distribution utilities in the US state of Tennessee. In contrast to previous empirical work on cross-sections of electric utilities, our results are statistically robust and consistent with the interest group theory of regulation. Intervention in rate cases, settlement vs. litigation of cases, and prices of alternative energy sources, as well as the size characteristics of customer groups and the firm, are significant determinants of the elasticity-weighted price-cost margin (Ramsey number) for each group. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Value-based insurance design: benefits beyond cost and utilization.

Science.gov (United States)

Gibson, Teresa B; Maclean, Ross J; Chernew, Michael E; Fendrick, A Mark; Baigel, Colin

2015-01-01

As value-based insurance design (VBID) programs proliferate, evidence is emerging on the impact of VBID. To date, studies have largely measured VBID impact on utilization, and a few studies have assessed its impact on quality, outcomes, and cost. In this commentary we discuss these domains, summarize evidence, and propose the extension of measurement of VBID impact into areas including workplace productivity and quality of life, employee and patient engagement, and talent attraction and retention. We contend that VBID evaluations should consider a broad variety of programmatic dividends on both humanistic and health-related outcomes.

Workplace Stress, Organizational Factors and EAP Utilization.

Science.gov (United States)

Azzone, Vanessa; McCann, Bernard; Merrick, Elizabeth Levy; Hiatt, Deirdre; Hodgkin, Dominic; Horgan, Constance

2009-01-01

This study examined relationships between workplace stress, organizational factors and use of EAP counseling services delivered by network providers in a large, privately-insured population. Claims data were linked to measures of workplace stress, focus on wellness/prevention, EAP promotion, and EAP activities for health care plan enrollees from 26 employers. The association of external environment and work organization variables with use of EAP counseling services was examined. Higher levels of EAP promotion and worksite activities were associated with greater likelihood of service use. Greater focus on wellness/prevention and unusual and significant stress were associated with lower likelihood of service use. Results provide stakeholders with insights on approaches to increasing utilization of EAP services.

Prerequisites for Amplicon Pyrosequencing of Microbial Methanol Utilizers in the Environment

Directory of Open Access Journals (Sweden)

Steffen eKolb

2013-09-01

Full Text Available The commercial availability of next generation sequencing (NGS technologies facilitated the assessment of functional groups of microorganisms in the environment with high coverage, resolution, and reproducibility. Soil methylotrophs were among the first microorganisms in the environment that were assessed with molecular tools, and nowadays, as well with NGS technologies. Studies in the past years re-attracted notice to the pivotal role of methylotrophs in global conversions of methanol, which mainly originates from plants, and is involved in oxidative reactions and ozone formation in the atmosphere. Aerobic methanol utilizers belong to Bacteria, yeasts, Ascomycota, and molds. Numerous bacterial methylotrophs are facultatively aerobic, and also contribute to anaerobic methanol oxidation in the environment, whereas strict anaerobic methanol utilizers belong to methanogens and acetogens. The diversity of enzymes catalyzing the initial oxidation of methanol is considerable, and comprises at least five different enzyme types in aerobes, and one in strict anaerobes. Only the gene of the large subunit of PQQ-dependent methanol dehydrogenase (mxaF has been analyzed by environmental pyrosequencing. To enable a comprehensive assessment of methanol utilizers in the environment, new primers targeting genes of the PQQ MDH in Methylibium (mdh2, of the NAD-dependent MDH (mdh, of the methanol oxidoreductase of Actinobacteria (mdo, of the fungal FAD-dependent alcohol oxidase (mod1, mod2, and homologues, and of the gene of the large subunit of the methanol:corrinoid methyltransferases (mtaC in methanogens and acetogens need to be developed. Combined stable isotope probing of nucleic acids or proteins with amplicon-based NGS are straightforward approaches to reveal insights into functions of certain methylotrophic taxa in the global methanol cycle.

Greater utilization of wood residue fuels through improved financial planning

International Nuclear Information System (INIS)

Billings, C.D.; Ziemke, M.C.; Stanford, R.

1991-01-01

Recent events have focused attention on the promotion of greater utilization of biomass fuel. Considerations include the need to reduce increases in global warming and also to improve ground level air quality by limiting the use of fossil fuels. However, despite all these important environmentally related considerations, economics remains the most important factor in the decision process used to determine the feasibility of using available renewable fuels instead of more convenient fossil fuels. In many areas of the Southeast, this decision process involves choosing between wood residue fuels such as bark, sawdust and shavings and presently plentiful natural gas. The primary candidate users of wood residue fuels are industries that use large amounts of heat and electric power and are located near centers of activity in the forest products industry such as sawmills, veneer mills and furniture factories. Given that such facilities both produce wood residues and need large amounts of heat and electricity, it is understandable that these firms are often major users of wood-fired furnaces and boilers. The authors have observed that poor or incomplete financial planning by the subject firms is a major barrier to economic utilization of inexpensive and widely available renewable fuels. In this paper, the authors suggest that wider usage of improved financial planning could double the present modest annual incidence of new commercial wood-fueled installation

[Isolation and identification of a lactate-utilizing, butyrate-producing bacterium and its primary metabolic characteristics].

Science.gov (United States)

Liu, Wei; Zhu, Wei-yun; Yao, Wen; Mao, Sheng-yong

2007-06-01

The distal mammalian gut harbors prodigiously abundant microbes, which provide unique metabolic traits to host. A lactate-utilizing, butyrate-producing bacterium, strain LB01, was isolated from adult swine feces by utilizing modified Hungate technique with rumen liquid-independent YCFA medium supplemented with lactate as the single carbon source. It was an obligate anaerobic, Gram positive bacterium, and could utilize glucose, fructose, maltose and lactate with a large amount of gas products. 16S rRNA sequence analysis revealed that it had the high similarity with members of the genus Megasphaera. The metabolic characteristics of strain LB01 was investigated by using in vitro fermentation system. Lactate at the concentration of 65 mmol/L in YCFA medium was rapidly consumed within 9 hours and was mainly converted to propionate and butyrate after 24h. As the level of acetate declined, the concentration of butyrate rose only in the presence of glucose, suggesting that butyrate could possibly be synthesized by the acetyl CoA: butyryl CoA transferase. When co-cultured with lactic acid bacteria strain K9, strain LB01 evidently reduced the concentration of lactate produced by strain K9 and decelerated the rapid pH drop, finally producing 12.11 mmol/L butyrate and 4.06 mmol/L propionate. The metabolic characteristics that strain LB01 efficiently converts toxic lactate and excessive acetate to butyrate can prevent lactate and acetate accumulation in the large intestine and maintain the slightly acidic environment of the large intestine, consequently revealing that stain LB01 could act as a potential probiotics.

Utility service entrance in boreholes

International Nuclear Information System (INIS)

1987-08-01

This study evaluates alternatives for utility service entrances to the repository. We determined the requirements for a repository utility supply. These requirements were defined as safety, maintainability, flexibility, reliability, cost efficiency, voltage regulation, and simplicity of operation. The study showed that repository shafts can best satisfy all requirements for location of the utility supply without the use of borehole penetrations into the repository. It is recommended that the shafts be utilized for utility distribution to the repository, and that the current NWTS program position to minimize the number of boreholes penetrating the repository horizon be maintained. 42 refs., 2 figs., 3 tabs

Energy utilization from landfill biogas; Aproveitamento energetico do biogas de aterros sanitarios

Energy Technology Data Exchange (ETDEWEB)

Candiani, Giovano [Universidade Federal do ABC, Santo Andre, SP (Brazil). Programa de Pos-Graduacao em Energia; Hoffmann, Gustavo; Silva, Elissandro Rocha da; Moreira, Joao M.L.; Tomioka, Jorge

2008-07-01

Landfills for solid waste disposal are used in Brazil and in most of countries in the world. The organic part of the solid wastes produces gas out of the decomposition of its organic content. This gas, named biogas and mostly made of carbon dioxide and methane, may be collected and used as an energy source due the methane presence. In this work we analyze the possible energy utilization of landfill biogas in Brazil in which the organic content of the solid waste is about 60%. The use of biogas as energy source can reduce the greenhouse gas emissions and improve the sanitation conditions of landfills. Moreover, it allows financial gains through selling of energy and carbon credits. In order to make possible the biogas utilization it is necessary to recognize the differences among the many landfills which exist in the country. There are the large and small landfills. The large ones usually have good instrumentation and gas exhaustion systems while the small ones have passive exhaustion systems and very few field instrumentation. The small landfills need to improve their instrumentation system and to incorporate exhaustion systems. (author)

Modeling energy flexibility of low energy buildings utilizing thermal mass

DEFF Research Database (Denmark)

Foteinaki, Kyriaki; Heller, Alfred; Rode, Carsten

2016-01-01

In the future energy system a considerable increase in the penetration of renewable energy is expected, challenging the stability of the system, as both production and consumption will have fluctuating patterns. Hence, the concept of energy flexibility will be necessary in order for the consumption...... to match the production patterns, shifting demand from on-peak hours to off-peak hours. Buildings could act as flexibility suppliers to the energy system, through load shifting potential, provided that the large thermal mass of the building stock could be utilized for energy storage. In the present study...... the load shifting potential of an apartment of a low energy building in Copenhagen is assessed, utilizing the heat storage capacity of the thermal mass when the heating system is switched off for relieving the energy system. It is shown that when using a 4-hour preheating period before switching off...

Generation, capture, and utilization of industrial carbon dioxide.

Science.gov (United States)

Hunt, Andrew J; Sin, Emily H K; Marriott, Ray; Clark, James H

2010-03-22

As a carbon-based life form living in a predominantly carbon-based environment, it is not surprising that we have created a carbon-based consumer society. Our principle sources of energy are carbon-based (coal, oil, and gas) and many of our consumer goods are derived from organic (i.e., carbon-based) chemicals (including plastics, fabrics and materials, personal care and cleaning products, dyes, and coatings). Even our large-volume inorganic-chemicals-based industries, including fertilizers and construction materials, rely on the consumption of carbon, notably in the form of large amounts of energy. The environmental problems which we now face and of which we are becoming increasingly aware result from a human-induced disturbance in the natural carbon cycle of the Earth caused by transferring large quantities of terrestrial carbon (coal, oil, and gas) to the atmosphere, mostly in the form of carbon dioxide. Carbon is by no means the only element whose natural cycle we have disturbed: we are transferring significant quantities of elements including phosphorus, sulfur, copper, and platinum from natural sinks or ores built up over millions of years to unnatural fates in the form of what we refer to as waste or pollution. However, our complete dependence on the carbon cycle means that its disturbance deserves special attention, as is now manifest in indicators such as climate change and escalating public concern over global warming. As with all disturbances in materials balances, we can seek to alleviate the problem by (1) dematerialization: a reduction in consumption; (2) rematerialization: a change in what we consume; or (3) transmaterialization: changing our attitude towards resources and waste. The "low-carbon" mantra that is popularly cited by organizations ranging from nongovernmental organizations to multinational companies and from local authorities to national governments is based on a combination of (1) and (2) (reducing carbon consumption though greater

X-rays utilization

International Nuclear Information System (INIS)

Rebigan, F.

1979-03-01

The modality of X-ray utilization in different activities and economy is given. One presents firstly quantities and units used in radiation dosimetry and other fields. One gives the generation of X-rays, their properties as well as the elements of radiation protection. The utilization characteristics of these radiations in different fields are finally given. (author)

Ultra-large field-of-view two-photon microscopy

OpenAIRE

Tsai, Philbert S.; Mateo, Celine; Field, Jeffrey J.; Schaffer, Chris B.; Anderson, Matthew E.; Kleinfeld, David

2015-01-01

We present a two-photon microscope that images the full extent of murine cortex with an objective-limited spatial resolution across an 8 mm by 10 mm field. The lateral resolution is approximately 1 µm and the maximum scan speed is 5 mm/ms. The scan pathway employs large diameter compound lenses to minimize aberrations and performs near theoretical limits. We demonstrate the special utility of the microscope by recording resting-state vasomotion across both hemispheres of the murine brain thro...

Facility Utilization Reports - FAA Aviation Information Utilization Reports

Data.gov (United States)

Department of Transportation — Provides: (1) Space management and planning, including area calculations, tracking space by organization and employee, and monitoring space utilization information....

Economic assessment of the engineering basis for wind power: Perspective of a vertically integrated utility

International Nuclear Information System (INIS)

Roy, Sanjoy

2009-01-01

If wind park configurations are globally coordinated across the service area of a power utility, then electricity can be generated for the grid with substantial cost advantages. Based on this premise, the paper introduces a model by which large scale assessment of grid connected wind based power generation may be undertaken for a utility service area. The model can be useful to the policy maker for decisions regarding suitable wind portfolio standards (WPS) definition. The utility, on the other hand, may use the model to study its service area for prospective wind based generation. Aspects of the problem modelled include cost-of-energy from individual generating units, daily load variations for the utility with emphasis on limited penetration, features of wind at prospective installation sites, makes of wind energy conversion systems (WECS) available, and recovery of expenditure through revenue. Application of the model to an assessment exercise for the state of Andhra Pradesh (India) is presented as an example. (author)

Utilization of OR method toward realization of better fast breeder reactor cycle

International Nuclear Information System (INIS)

Shiotani, Hiroki

2008-01-01

Fast Reactor Cycle Technology Development (FaCT) Project was now started aiming at commercialization of new nuclear power plants system. In parallel with development of component technology and technology demonstration by test, development of comprehensive evaluation method of the FBR cycle system is under way and scenario study, discounted cash flow (DCF) method, analytic hierarchy process (AHP), real option, supply chain management (SCM) and others are used. Since commercialized FBR cycle would request long-term and large-scale development contributed by so many participants, modeling of nuclear system and knowledge management are beneficial even for development of evaluation method and further utilization of OR technology is highly expected. Comprehensive evaluation methods now utilized or developing were overlooked from the standpoint of OR, 'Science of Better'. (T. Tanaka)

Concave utility, transaction costs, and risk in measuring discounting of delayed rewards.

Science.gov (United States)

Kirby, Kris N; Santiesteban, Mariana

2003-01-01

Research has consistently found that the decline in the present values of delayed rewards as delay increases is better fit by hyperbolic than by exponential delay-discounting functions. However, concave utility, transaction costs, and risk each could produce hyperbolic-looking data, even when the underlying discounting function is exponential. In Experiments 1 (N = 45) and 2 (N = 103), participants placed bids indicating their present values of real future monetary rewards in computer-based 2nd-price auctions. Both experiments suggest that utility is not sufficiently concave to account for the superior fit of hyperbolic functions. Experiment 2 provided no evidence that the effects of transaction costs and risk are large enough to account for the superior fit of hyperbolic functions.

A Trace Data-Based Approach for an Accurate Estimation of Precise Utilization Maps in LTE

Directory of Open Access Journals (Sweden)

Almudena Sánchez

2017-01-01

Full Text Available For network planning and optimization purposes, mobile operators make use of Key Performance Indicators (KPIs, computed from Performance Measurements (PMs, to determine whether network performance needs to be improved. In current networks, PMs, and therefore KPIs, suffer from lack of precision due to an insufficient temporal and/or spatial granularity. In this work, an automatic method, based on data traces, is proposed to improve the accuracy of radio network utilization measurements collected in a Long-Term Evolution (LTE network. The method’s output is an accurate estimate of the spatial and temporal distribution for the cell utilization ratio that can be extended to other indicators. The method can be used to improve automatic network planning and optimization algorithms in a centralized Self-Organizing Network (SON entity, since potential issues can be more precisely detected and located inside a cell thanks to temporal and spatial precision. The proposed method is tested with real connection traces gathered in a large geographical area of a live LTE network and considers overload problems due to trace file size limitations, which is a key consideration when analysing a large network. Results show how these distributions provide a very detailed information of network utilization, compared to cell based statistics.

Advanced Large Area Plastic Scintillator Project (ALPS): Final Report

International Nuclear Information System (INIS)

Jordan, David V.; Reeder, Paul L.; Todd, Lindsay C.; Warren, Glen A.; McCormick, Kathleen R.; Stephens, Daniel L.; Geelhood, Bruce D.; Alzheimer, James M.; Crowell, Shannon L.; Sliger, William A.

2008-01-01

The advanced Large-Area Plastic Scintillator (ALPS) Project at Pacific Northwest National Laboratory investigated possible technological avenues for substantially advancing the state-of-the-art in gamma-ray detection via large-area plastic scintillators. The three predominant themes of these investigations comprised the following: * Maximizing light collection efficiency from a single large-area sheet of plastic scintillator, and optimizing hardware event trigger definition to retain detection efficiency while exploiting the power of coincidence to suppress single-PMT 'dark current' background; * Utilizing anti-Compton vetoing and supplementary spectral information from a co-located secondary, or 'Back' detector, to both (1) minimize Compton background in the low-energy portion of the 'Front' scintillator's pulse-height spectrum, and (2) sharpen the statistical accuracy of the front detector's low-energy response prediction as implemented in suitable energy-windowing algorithms; and * Investigating alternative materials to enhance the intrinsic gamma-ray detection efficiency of plastic-based sensors

Utility application of simulation software

International Nuclear Information System (INIS)

Sudduth, A.L.

1986-01-01

The purpose of this paper is to discuss dynamic system simulation from the perspective of a successful utility user. In it, four aspects of the issue of utility use of simulation will be addressed: (1) What simulation software is available to utilities which can be of practical assistance with a modest investment in staff and training. (2) To what specific problems can utilities apply the technique of simulation and achieve reasonably cost effective results. (3) What the advantages are of in-house dynamic simulation capability, as opposed to depending on NSSS vendors or consultants. (4) What the prospects are for wider use of dynamic simulation in the utility industry

Co-Emulation of Scan-Chain Based Designs Utilizing SCE-MI Infrastructure

OpenAIRE

Tomas, Bill Jason; Jiang, Yingtao; Yang, Mei

2014-01-01

As the complexity of the scan algorithm is dependent on the number of design registers, large SoC scan designs can no longer be verified in RTL simulation unless partitioned into smaller sub - blocks. This paper proposes a meth odology to decrease scan - chain verification time utilizing SCE - MI, a widely used communication protocol for emulation, and an FPGA - based emulation platform. A high - level (SystemC) testbench and FPGA synthesizable har...

INTEGRATING VISUALIZATION AND MULTI-ATTRIBUTE UTILITY THEORY FOR ONLINE PRODUCT SELECTION

OpenAIRE

CHUREE THEETRANONT; PETER HADDAWY; DONYAPRUETH KRAIRIT

2007-01-01

Effectively selling products online is a challenging task. Today's product domains often contain a dizzying variety of brands and models with highly complex sets of characteristics. This paper addresses the problem of supporting product search and selection in domains containing large numbers of alternatives with complex sets of features. A number of online shopping websites provide product choice assistance by making direct use of Multi-Attribute Utility Theory (MAUT). While the MAUT approac...

24 CFR 5.632 - Utility reimbursements.

Science.gov (United States)

2010-04-01

... Section 8 Project-Based Assistance Family Payment § 5.632 Utility reimbursements. (a) Applicability. This... the utility supplier to pay the utility bill on behalf of the family. If the PHA elects to pay the utility supplier, the PHA must notify the family of the amount paid to the utility supplier. (3) In the...

The causal structure of utility conditionals.

Science.gov (United States)

Bonnefon, Jean-François; Sloman, Steven A

2013-01-01

The psychology of reasoning is increasingly considering agents' values and preferences, achieving greater integration with judgment and decision making, social cognition, and moral reasoning. Some of this research investigates utility conditionals, ''if p then q'' statements where the realization of p or q or both is valued by some agents. Various approaches to utility conditionals share the assumption that reasoners make inferences from utility conditionals based on the comparison between the utility of p and the expected utility of q. This article introduces a new parameter in this analysis, the underlying causal structure of the conditional. Four experiments showed that causal structure moderated utility-informed conditional reasoning. These inferences were strongly invited when the underlying structure of the conditional was causal, and significantly less so when the underlying structure of the conditional was diagnostic. This asymmetry was only observed for conditionals in which the utility of q was clear, and disappeared when the utility of q was unclear. Thus, an adequate account of utility-informed inferences conditional reasoning requires three components: utility, probability, and causal structure. Copyright © 2012 Cognitive Science Society, Inc.

Recovery of Utility Fixed Costs: Utility, Consumer, Environmental and Economist Perspectives

Energy Technology Data Exchange (ETDEWEB)

Wood, Lisa [Inst. for Electric Innovation and The Edison Foundation, Washington DC (United States); Hemphill, Ross [RCHemphill Solutions, Columbus, OH (United States); Howat, John [National Consumer Law Center, Boston, MA (United States); Cavanagh, Ralph [Natural Resources Defense Council, New York, NY (United States); Borenstein, Severin [Univ. of California, Berkeley, CA (United States); Deason, Jeff [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-06-14

Utilities recover costs for providing electric service to retail customers through a combination of rate components that together comprise customers’ monthly electric bills. Rates and rate designs are set by state regulators and vary by jurisdiction, utility and customer class. In addition to the fundamental tenet of setting fair and reasonable rates, rate design balances economic efficiency, equity and fairness, customer satisfaction, utility revenue stability, and customer price and bill stability.1 At the most basic level, retail electricity bills in the United States typically include a fixed monthly customer charge — a set dollar amount regardless of energy usage — and a volumetric energy charge for each kilowatt-hour consumed.2 The energy charge may be flat across all hours, vary by usage level (for example, higher rates at higher levels of usage), or vary based on time of consumption.3 While some utility costs, such as fuel costs, clearly vary according to electricity usage, other costs are “fixed” over the short run — generally, those that do not vary over the course of a year. Depending on your point of view, and whether the state’s electricity industry has been restructured or remains vertically integrated, the set of costs that are “fixed” may be quite limited. Or the set may extend to all capacity costs for generation, transmission and distribution. In the long run, all costs are variable. In the context of flat or declining loads in some regions, utilities are proposing a variety of changes to retail rate designs, particularly for residential customers, to recover fixed costs. In this report, authors representing utility (Chapter 1), consumer (Chapter 2), environmentalist (Chapter 3) and economist (Chapter 4) perspectives discuss fixed costs for electric utilities and set out their principles for recovering those costs. The table on the next page summarizes each author’s relative preferences for various options for fixed cost

Proceedings: 1993 fuel oil utilization workshop

International Nuclear Information System (INIS)

1994-08-01

The primary objective of the Workshop was to utilize the experiences of utility personnel and continue the interchange of information related to fuel oil issues. Participants also identified technical problem areas in which EPRI might best direct its efforts in research and development of fuel oil utilization and to improve oil-fired steam generating systems' performance. Speakers presented specific fuel projects conducted at their particular utilities, important issues in the utilization of fuel oil, studies conducted or currently in the process of being completed, and information on current and future regulations for fuel utilization. Among the major topics addressed at the 1993 Fuel Oil Utilization Workshop were burner and ESP improvements for the reduction of particulate and NO x emissions, practical experience in utilization of low API gravity residual fuel oils, the use of models to predict the spread of oil spills on land, implementing OPA 90 preparedness and response strategies planning, a report on the annual Utility Oil Buyers Conference, ASTM D-396 specification for No. 6 fuel oil, the utilization of Orimulsion reg-sign in utility boilers, recent progress on research addressing unburned carbon and opacity from oil-fired utility boilers, EPRI's hazardous air pollutant monitoring and implications for residual fuel oil, and the feasibility of toxic metals removal from residual fuel oils. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Use of the Anterolateral Thigh and Vertical Rectus Abdominis Musculocutaneous Flaps as Utility Flaps in Reconstructing Large Groin Defects

Directory of Open Access Journals (Sweden)

Edwin Jonathan Aslim

2014-09-01

Full Text Available BackgroundGroin dissections result in large wounds with exposed femoral vessels requiring soft tissue coverage, and the reconstructive options are diverse. In this study we reviewed our experience with the use of the pedicled anterolateral thigh and vertical rectus abdominis musculocutaneous flaps in the reconstruction of large groin wounds.MethodsGroin reconstructions performed over a period of 10 years were evaluated, with a mean follow up of two years. We included all cases with large or complex (involving perineum defects, which were reconstructed with the pedicled anterolateral thigh musculocutaneous or the vertical rectus abdominis musculocutaneous (VRAM flaps. Smaller wounds which were covered with skin grafts, locally based flaps and pedicled muscle flaps were excluded.ResultsTwenty-three reconstructions were performed for large or complex groin defects, utilising the anterolateral thigh (n=10 and the vertical rectus abdominis (n=13 pedicled musculocutaneous flaps. Femoral vein reconstruction with a prosthetic graft was required in one patient, and a combination flap (VRAM and gracilis muscle flap was performed in another. Satisfactory coverage was achieved in all cases without major complications. No free flaps were used in our series.ConclusionsThe anterolateral thigh and vertical rectus abdominis pedicled musculocutaneous flaps yielded consistent results with little morbidity in the reconstruction of large and complex groin defects. A combination of flaps can be used in cases requiring extensive cover.

Estimation of utility weights for human papilloma virus-related health states according to disease severity.

Science.gov (United States)

Ock, Minsu; Park, Jeong-Yeol; Son, Woo-Seung; Lee, Hyeon-Jeong; Kim, Seon-Ha; Jo, Min-Woo

2016-11-28

A cost-utility study of a human papilloma virus (HPV) vaccine requires that the utility weights for HPV-related health states (i.e., cervical intraepithelial neoplasia (CIN), cervical cancer, and condyloma) be evaluated. The aim of the present study was to determine the utility weights for HPV-related health states. Hypothetical standardised health states related to HPV were developed based on patient education material and previous publications. To fully reflect disease progression from diagnosis to prognosis, each health state comprised four parts (diagnosis, symptoms, treatment, and progression and prognosis). Nine-hundred members from the Korean general population evaluated the HPV-related health states using a visual analogue scale (VAS) and a standard gamble (SG) approach, which were administered face-to-face via computer-assisted interview. The mean utility values were calculated for each HPV-related health state. According to the VAS, the highest utility (0.73) was HPV-positive status, followed by condyloma (0.66), and CIN grade I (0.61). The lowest utility (0.18) was cervical cancer requiring chemotherapy without surgery, followed by cervical cancer requiring chemoradiation therapy (0.42). SG revealed that the highest utility (0.83) was HPV-positive status, followed by condyloma (0.78), and CIN grade I (0.77). The lowest utility (0.43) was cervical cancer requiring chemotherapy without surgery, followed by cervical cancer requiring chemoradiation therapy (0.60). This study was based on a large sample derived from the general Korean population; therefore, the calculated utility weights might be useful for evaluating the economic benefit of cancer screening and HPV vaccination programs.

Variations in Student Mental Health and Treatment Utilization Across US Colleges and Universities.

Science.gov (United States)

Ketchen Lipson, Sarah; Gaddis, S Michael; Heinze, Justin; Beck, Kathryn; Eisenberg, Daniel

2015-01-01

On US college campuses, mental health problems are highly prevalent, appear to be increasing, and are often untreated. Concerns about student mental health are well documented, but little is known about potential variations across the diversity of institutions of higher education. Participants were 43,210 undergraduates at 72 campuses that participated in the Healthy Minds Study from 2007 to 2013. Multivariable logistic regressions focus on associations between institutional characteristics and student mental health and treatment utilization. The following institutional characteristics are associated with worse mental health: doctoral-granting, public, large enrollment, nonresidential, less competitive, and lower graduation rates. Among students with apparent mental health problems, treatment utilization is higher at doctorate-granting institutions, baccalaureate colleges, institutions with small enrollments, and schools with strong residential systems. Although high rates of mental health problems and low treatment utilization are major concerns at all types of institutions of higher education, substantial variation occurs across campuses.

An easy, low-cost method to transfer large-scale graphene onto polyethylene terephthalate as a transparent conductive flexible substrate

International Nuclear Information System (INIS)

Chen, Chih-Sheng; Hsieh, Chien-Kuo

2014-01-01

In this study, we develop a low-cost method for transferring a large-scale graphene film onto a flexible transparent substrate. An easily accessible method for home-made chemical vapor deposition (CVD) and a commercial photograph laminator were utilized to fabricate the low-cost graphene-based transparent conductive flexible substrate. The graphene was developed based on CVD growth on nickel foil using a carbon gas source, and the graphene thin film was easily transferred onto the laminating film via a heated photograph laminator. Field emission scanning electron microscopy and atomic force microscopy were utilized to examine the morphological characteristics of the graphene surface. Raman spectroscopy and transmission electron microscopy were utilized to examine the microstructure of the graphene. The optical–electronic properties of the transferred graphene flexible thin film were measured by ultraviolet–visible spectrometry and a four-point probe. The advantage of this method is that large-scale graphene-based thin films can be easily obtained. We provide an economical method for fabricating a graphene-based transparent conductive flexible substrate. - Highlight: • We synthesized the large-scale graphene by thermal CVD method. • A low-cost commercial photograph laminator was used to transfer graphene. • A large-scale transparent and flexible graphene substrate was obtained easily

An easy, low-cost method to transfer large-scale graphene onto polyethylene terephthalate as a transparent conductive flexible substrate

Energy Technology Data Exchange (ETDEWEB)

Chen, Chih-Sheng; Hsieh, Chien-Kuo, E-mail: jack_hsieh@mail.mcut.edu.tw

2014-11-03

In this study, we develop a low-cost method for transferring a large-scale graphene film onto a flexible transparent substrate. An easily accessible method for home-made chemical vapor deposition (CVD) and a commercial photograph laminator were utilized to fabricate the low-cost graphene-based transparent conductive flexible substrate. The graphene was developed based on CVD growth on nickel foil using a carbon gas source, and the graphene thin film was easily transferred onto the laminating film via a heated photograph laminator. Field emission scanning electron microscopy and atomic force microscopy were utilized to examine the morphological characteristics of the graphene surface. Raman spectroscopy and transmission electron microscopy were utilized to examine the microstructure of the graphene. The optical–electronic properties of the transferred graphene flexible thin film were measured by ultraviolet–visible spectrometry and a four-point probe. The advantage of this method is that large-scale graphene-based thin films can be easily obtained. We provide an economical method for fabricating a graphene-based transparent conductive flexible substrate. - Highlight: • We synthesized the large-scale graphene by thermal CVD method. • A low-cost commercial photograph laminator was used to transfer graphene. • A large-scale transparent and flexible graphene substrate was obtained easily.

The utility of N-15 nuclear magnetic resonance spectroscopy for the study of natural products

International Nuclear Information System (INIS)

Randall, E.W.

1978-01-01

The utility of 15 N NMR spectroscopy for the study of natural products and the difficulties which must be overcome arte discussed. The widespread use of pulse Fourier techniques, decouplings, larger magnetic fields and large tube sizes allows a large number of 15 N studies of natural products, the more recent and important of these being peptides, nucleosides and nucleotides. Sites of protonation, tautomerism, sites of nitrosation and proton exchange behaviour for some of these natrual products have been studied. (A.G.)

Examining related influential factors for dental calculus scaling utilization among people with disabilities in Taiwan, a nationwide population-based study.

Science.gov (United States)

Lai, Hsien-Tang; Kung, Pei-Tseng; Su, Hsun-Pi; Tsai, Wen-Chen

2014-09-01

Limited studies with large samples have been conducted on the utilization of dental calculus scaling among people with physical or mental disabilities. This study aimed to investigate the utilization of dental calculus scaling among the national disabled population. This study analyzed the utilization of dental calculus scaling among the disabled people, using the nationwide data between 2006 and 2008. Descriptive analysis and logistic regression were performed to analyze related influential factors for dental calculus scaling utilization. The dental calculus scaling utilization rate among people with physical or mental disabilities was 16.39%, and the annual utilization frequency was 0.2 times. Utilization rate was higher among the female and non-aboriginal samples. Utilization rate decreased with increased age and disability severity while utilization rate increased with income, education level, urbanization of residential area and number of chronic illnesses. Related influential factors for dental calculus scaling utilization rate were gender, age, ethnicity (aboriginal or non-aboriginal), education level, urbanization of residence area, income, catastrophic illnesses, chronic illnesses, disability types, and disability severity significantly influenced the dental calculus scaling utilization rate. Copyright © 2014 Elsevier Ltd. All rights reserved.

FBC utilization prospects in decentralized cogeneration units in Caucasus region countries

Directory of Open Access Journals (Sweden)

Skodras George

2003-01-01

Full Text Available Great differences are encountered among Caucasus region countries with respect to energy resources reserves and economic conditions. Thermal power plants consist of obsolete and inefficient units, while the Soviet-type large heating systems in the area collapsed after 1992 and their reconstruction is considered uneconomic. Renovation needs of the power and heat sector, and the potential of Fluidised Bed Combustion implementations in decentralized cogeneration units were investigated, since operating oil and gas power plants exhibit high fuel consumption, low efficiency and poor environmental performance. Results showed significant prospects of Fluidised Bed Combustion utilization in decentralized cogeneration units in the Caucausus region heat and power sector. Their introduction constitutes an economically attractive way to cover power and heat demands and promotes utilization of domestic energy resources in all of three countries, provided that financial difficulties could be confronted.

The utility target market model

International Nuclear Information System (INIS)

Leng, G.J.; Martin, J.

1994-01-01

A new model (the Utility Target Market Model) is used to evaluate the economic benefits of photovoltaic (PV) power systems located at the electrical utility customer site. These distributed PV demand-side generation systems can be evaluated in a similar manner to other demand-side management technologies. The energy and capacity values of an actual PV system located in the service area of the New England Electrical System (NEES) are the two utility benefits evaluated. The annual stream of energy and capacity benefits calculated for the utility are converted to the installed cost per watt that the utility should be willing to invest to receive this benefit stream. Different discount rates are used to show the sensitivity of the allowable installed cost of the PV systems to a utility's average cost of capital. Capturing both the energy and capacity benefits of these relatively environmentally friendly distributed generators, NEES should be willing to invest in this technology when the installed cost per watt declines to ca $2.40 using NEES' rated cost of capital (8.78%). If a social discount rate of 3% is used, installation should be considered when installed cost approaches $4.70/W. Since recent installations in the Sacramento Municipal Utility District have cost between $7-8/W, cost-effective utility applications of PV are close. 22 refs., 1 fig., 2 tabs

RNA–Stable-Isotope Probing Shows Utilization of Carbon from Inulin by Specific Bacterial Populations in the Rat Large Bowel

Science.gov (United States)

Lawley, Blair; Munro, Karen; Sims, Ian M.; Lee, Julian; Butts, Christine A.; Roy, Nicole

2014-01-01

Knowledge of the trophisms that underpin bowel microbiota composition is required in order to understand its complex phylogeny and function. Stable-isotope (13C)-labeled inulin was added to the diet of rats on a single occasion in order to detect utilization of inulin-derived substrates by particular members of the cecal microbiota. Cecal digesta from Fibruline-inulin-fed rats was collected prior to (0 h) and at 6, 12, 18 and 24 h following provision of the [13C]inulin diet. RNA was extracted from these cecal specimens and fractionated in isopycnic buoyant density gradients in order to detect 13C-labeled nucleic acid originating in bacterial cells that had metabolized the labeled dietary constituent. RNA extracted from specimens collected after provision of the labeled diet was more dense than 0-h RNA. Sequencing of 16S rRNA genes amplified from cDNA obtained from these fractions showed that Bacteroides uniformis, Blautia glucerasea, Clostridium indolis, and Bifidobacterium animalis were the main users of the 13C-labeled substrate. Culture-based studies of strains of these bacterial species enabled trophisms associated with inulin and its hydrolysis products to be identified. B. uniformis utilized Fibruline-inulin for growth, whereas the other species used fructo-oligosaccharide and monosaccharides. Thus, RNA–stable-isotope probing (RNA-SIP) provided new information about the use of carbon from inulin in microbiota metabolism. PMID:24487527

Business case for implementing two ergonomic interventions at an electric power utility.

Science.gov (United States)

Seeley, Patricia A; Marklin, Richard W

2003-09-01

Ergonomics analysis of line workers in the electric power industry who work overhead on utility poles revealed some tasks for which less than 1% of the general population had sufficient strength to perform. During a 2-year study, a large Midwestern US electric utility provided a university with a team of represented workers and management. They evaluated, recommended, and monitored interventions for 32 common line worker tasks that were rated at medium to high magnitude of risk factors for musculoskeletal disorders (MSDs). Two of the recommended ergonomic interventions-the battery-operated press and cutter-were selected by the team as having the greatest potential for reducing risk factors of MSDs. Only overhead distribution line worker tasks were evaluated. A business case was formulated that took into account medical injury and illness statistics, workers' compensation, replacement worker and retraining costs. An outline of a business case formulation and a sample intervention payback calculation is shown. Based on the business case, the utility committed over US dollars 300000 to purchase battery-operated presses and cutters for their overhead distribution line crews.

Dealing with the difficult utility

International Nuclear Information System (INIS)

Keats, D.E.; Sundquist, M.J.; Cross, J.P.

1991-01-01

STS HydroPower, Ltd. (STS) is an independent hydroelectric power developer involved in the full scope of hydroelectric activities. This includes the permitting, design, financing, turbine design and manufacturing, site construction and operation of small to mid-sized hydroelectric sites across the United States. At the present time, STS owns and operates nine sites in four states with a combined capacity of 20 megawatts. In dealing with the implementation of these sites, STS has dealt with five different utilities. In addition, in pursuing additional development opportunities throughout the United States, STS has had contact with numerous other utilities. During this time it would be fair to conclude that each of these utilities has exhibited its own personality with respect to dealing with independent developers. To the credit of the utility industry, the majority of these utilities have been helpful and supportive of independent projects, but a small number of utilities have approached projects from an initial and continuing adversarial position. The purpose of this paper is to examine those options and procedures available to the developer when a utility is encountered with a negative predisposition

Five Large Generation Groups:Competing in Capital Operation

Institute of Scientific and Technical Information of China (English)

无

2008-01-01

@@ Since the reform of electric power industry in 2002,the newly established five large generation groups have been persisting in the development strategy of "taking electricity as the core and extending to up-and-downstream businesses." Stringent measures were taken in capital operation and their potential has been shown through electric power assets acquiring,coal and financial resources investing,capital market financing as well as power utility restructuring.The five groups are playing more and more important roles in merger and acquisition (M&A) and capital markets.

Financing the electric power utilities, especially the nuclear power in Japan

International Nuclear Information System (INIS)

Tajima, T.

1975-04-01

Electric power demands in Japan have shown a remarkable growth at an annual rate of 12% since 1965. Nine electric power companies have invested large amounts of money so far, amounting to over 1 trillion yen every year since 1972. A survey of the electric power supply system and an estimation of the electric power demands in 1980 and in 1985 are given. It is expected that the main portion of electric power in the future will gradually be generated by nuclear plants. Financial features of the electrical power utilities, the credit risk of the electric power utilities, and the raising of funds by electric power utilities are discussed. It is concluded that it will be necessary (1) to expand the capital market, (2) to enable the electric power companies to issue a sufficient amount of bonds, (3) to make the Government financing institutions, such as the Japan Development Bank, provide the electric power companies with larger funds on a long-term and low-interest rate basis, and (4) even to take such drastic steps as subsidizing interest on private loans to the electric power companies. (B.P.)

Optimization criteria for low temperature waste heat utilization

International Nuclear Information System (INIS)

Kranebitter, F.

1977-01-01

A special case in this field is the utilization of very low temperature waste heat. The temperature level under consideration in this paper is in the range between the body temperature of human beings and their environment. The waste heat from power generation and industrial processes is also considered. Thermal energy conversion will be mainly accomplished by heat cycles where discharged waste heat is reverse proportional to the upper cycle temperature. Limiting this upper cycle temperature by technological reasons the optimization of the heat cycle will depend on the nature of the cycle itself and specially on the temperature selected for the heat discharge. The waste heat discharge is typical for the different kinds of heat cycles and the paper presents the four most important of them. Feasible heat transfer methods and their economic evaluations are discussed and the distillation processes will be the basis for further considerations. The waste heat utilization for distillation purposes could be realized by three different cycles, the open cycle, the closed cycle and the multy cycle. Resulting problems as deaeration of large water streams and removal of the dissolved gases and their solutions are also discussed. (M.S.)

The Characteristic of Molten Heat Salt Storage System Utilizing Solar Energy Combined with Valley Electric

Directory of Open Access Journals (Sweden)

LI .Jiu-ru

2017-02-01

Full Text Available With the environmental pollution and energy consumption clue to the large difference between peak and valley of power grid，the molten salt heat storage system(MSHSS utilizing solar Energy combined with valley electric is presented for good energy saving and low emissions. The costs of MSHSS utilizing solar Energy combined with valley electric are greatly reduced. The law of heat transfer in molten salt heat storage technology is studied with the method of grey correlation analysis. The results show the effect of elbow sizes on surface convective heat transfer coefficient with different flow velocities.

Focus on vulnerable populations and promoting equity in health service utilization--an analysis of visitor characteristics and service utilization of the Chinese community health service.

Science.gov (United States)

Dong, Xiaoxin; Liu, Ling; Cao, Shiyi; Yang, Huajie; Song, Fujian; Yang, Chen; Gong, Yanhong; Wang, Yunxia; Yin, Xiaoxu; Xu, Xing; Xie, Jun; Sun, Yi; Lu, Zuxun

2014-05-26

Community health service in China is designed to provide a convenient and affordable primary health service for the city residents, and to promote health equity. Based on data from a large national study of 35 cities across China, we examined the characteristics of the patients and the utilization of community health institutions (CHIs), and assessed the role of community health service in promoting equity in health service utilization for community residents. Multistage sampling method was applied to select 35 cities in China. Four CHIs were randomly chosen in every district of the 35 cities. A total of 88,482 visitors to the selected CHIs were investigated by using intercept survey method at the exit of the CHIs in 2008, 2009, 2010, and 2011. Descriptive analyses were used to analyze the main characteristics (gender, age, and income) of the CHI visitors, and the results were compared with that from the National Health Services Survey (NHSS, including CHIs and higher levels of hospitals). We also analyzed the service utilization and the satisfactions of the CHI visitors. The proportions of the children (2.4%) and the elderly (about 22.7%) were lower in our survey than those in NHSS (9.8% and 38.8% respectively). The proportion of the low-income group (26.4%) was apparently higher than that in NHSS (12.5%). The children group had the lowest satisfaction with the CHIs than other age groups. The satisfaction of the low-income visitors was slightly higher than that of the higher-income visitors. The utilization rate of public health services was low in CHIs. The CHIs in China appears to fulfill the public health target of uptake by vulnerable populations, and may play an important role in promoting equity in health service utilization. However, services for children and the elderly should be strengthened.

Understanding utility regulation : a participants' guide to the British Columbia Utilities Commission

International Nuclear Information System (INIS)

1996-10-01

Information regarding British Columbia's regulated energy industries is presented with particular emphasis on the regulatory functions of the British Columbia Utilities Commission (BCUC). The objective of providing the information is to make the regulatory process as transparent as possible and to make it easy for ratepayers to effectively and economically participate in the regulation of energy utilities. The issue of why electricity and natural gas utilities are regulated is addressed, but the greater part of the report is devoted to describing opportunities for public participation at the BCUC, explaining how to get involved in the Commission's proceedings and the nature of the hearings used by the Commission. An introduction to rate making is also presented, along with an overview of other institutions involved in energy regulation. Appendices contain the text of the Utilities Commission Act (App. A), the Negotiated Settlement Process Policy, Procedures and Guidelines (App. B), Participant Funding and Cost Awards (App. C), and the Integrated Resource Planning Guide (App. D). tabs., figs., 4 appendices

Small- and large-stakes risk aversion: implications of concavity calabration for decision theory

NARCIS (Netherlands)

Cox, J.C.; Sadiraj, V.

2006-01-01

A growing literature reports the conclusions that: (a) expected utility theory does not provide a plausible theory of risk aversion for both small-stakes and large-stakes gambles; and (b) this decision theory should be replaced with an alternative theory characterized by loss aversion. This paper

Wake characteristics of wind turbines in utility-scale wind farms

Science.gov (United States)

Yang, Xiaolei; Foti, Daniel; Sotiropoulos, Fotis

2017-11-01

The dynamics of turbine wakes is affected by turbine operating conditions, ambient atmospheric turbulent flows, and wakes from upwind turbines. Investigations of the wake from a single turbine have been extensively carried out in the literature. Studies on the wake dynamics in utility-scale wind farms are relatively limited. In this work, we employ large-eddy simulation with an actuator surface or actuator line model for turbine blades to investigate the wake dynamics in utility-scale wind farms. Simulations of three wind farms, i.e., the Horns Rev wind farm in Denmark, Pleasant Valley wind farm in Minnesota, and the Vantage wind farm in Washington are carried out. The computed power shows a good agreement with measurements. Analysis of the wake dynamics in the three wind farms is underway and will be presented in the conference. This work was support by Xcel Energy (RD4-13). The computational resources were provided by National Renewable Energy Laboratory.

Utility Potential of Parthenium hysterophorus for Its Strategic Management

Directory of Open Access Journals (Sweden)

Anita Saini

2014-01-01

Full Text Available Parthenium hysterophorus, one of the world’s most dangerous weeds, is responsible for huge losses to the biodiversity, agriculture, economy, and health of livestock and human beings. High competitive success rate and adaptability of the species enable it to dominate diverse types of habitats. Various weed control strategies are being used globally to reduce its population to manageable levels. But owing to many limitations associated with the conventional methods, management of Parthenium still remains a challenge. Recently large scale utilization has been taken up as a holistic approach for the control of weeds. Parthenium hysterophorus can be managed by exploiting this weed in diverse fields. In agriculture, it can be used either as green manure or after composting. Industrially it can be used for producing various value added products. The weed also exhibits many environmental applications. Chemical constituents of Parthenium show extensive range of pharmacological activities suggesting its role as a chemotherapeutic agent. This review briefly discusses the problem of Parthenium and enlists its possible utilities which can open new avenues for effective management of this violent weed.

Hualapai Tribal Utility Development Project

Energy Technology Data Exchange (ETDEWEB)

Hualapai Tribal Nation

2008-05-25

The first phase of the Hualapai Tribal Utility Development Project (Project) studied the feasibility of establishing a tribally operated utility to provide electric service to tribal customers at Grand Canyon West (see objective 1 below). The project was successful in completing the analysis of the energy production from the solar power systems at Grand Canyon West and developing a financial model, based on rates to be charged to Grand Canyon West customers connected to the solar systems, that would provide sufficient revenue for a Tribal Utility Authority to operate and maintain those systems. The objective to establish a central power grid over which the TUA would have authority and responsibility had to be modified because the construction schedule of GCW facilities, specifically the new air terminal, did not match up with the construction schedule for the solar power system. Therefore, two distributed systems were constructed instead of one central system with a high voltage distribution network. The Hualapai Tribal Council has not taken the action necessary to establish the Tribal Utility Authority that could be responsible for the electric service at GCW. The creation of a Tribal Utility Authority (TUA) was the subject of the second objective of the project. The second phase of the project examined the feasibility and strategy for establishing a tribal utility to serve the remainder of the Hualapai Reservation and the feasibility of including wind energy from a tribal wind generator in the energy resource portfolio of the tribal utility (see objective 2 below). It is currently unknown when the Tribal Council will consider the implementation of the results of the study. Objective 1 - Develop the basic organizational structure and operational strategy for a tribally controlled utility to operate at the Tribe’s tourism enterprise district, Grand Canyon West. Coordinate the development of the Tribal Utility structure with the development of the Grand Canyon

When the 'soft-path' gets hard: demand management and financial instability for water utilities

Science.gov (United States)

Zeff, H. B.; Characklis, G. W.

2014-12-01

In the past, cost benefit analysis (CBA) has been viewed as an effective means of evaluating water utility strategies, particularly those that were dependent on the construction of new supply infrastructure. As water utilities have begun to embrace 'soft-path' approaches as a way to reduce the need for supply-centric development, CBA fails to recognize some important financial incentives affected by reduced water consumption. Demand management, both as a short-term response to drought and in longer-term actions to accommodate demand growth, can introduce revenue risks that adversely affect a utility's ability to repay debt, re-invest in aging infrastructure, or maintain reserve funds for use in a short-term emergency. A utility that does not generate sufficient revenue to support these functions may be subject to credit rating downgrades, which in turn affect the interest rate it pays on its debt. Interest rates are a critical consideration for utility managers in the capital-intensive water sector, where debt payments for infrastructure often account for a large portion of a utility's overall costs. Even a small increase in interest rates can add millions of dollars to the cost of new infrastructure. Recent studies have demonstrated that demand management techniques can lead to significant revenue variability, and credit rating agencies have begun to take notice of drought response plans when evaluating water utility credit ratings, providing utilities with a disincentive to fully embrace soft-path approaches. This analysis examines the impact of demand management schemes on key credit rating metrics for a water utility in Raleigh, North Carolina. The utility's consumer base is currently experiencing rapid population growth, and demand management has the potential to reduce the dependence on costly new supply infrastructure but could lead to financial instability that will significantly increase the costs of financing future projects. This work analyzes how 'soft

Operational, cost, and technical study of large windpower systems integrated with an existing electric utility. Final report

Energy Technology Data Exchange (ETDEWEB)

Ligon, C.; Kirby, G.; Jordan, D.; Lawrence, J.H.; Wiesner, W.; Kosovec, A.; Swanson, R.K.; Smith, R.T.; Johnson, C.C.; Hodson, H.O.

1976-04-01

Detailed wind energy assessment from the available wind records, and evaluation of the application of wind energy systems to an existing electric utility were performed in an area known as the Texas Panhandle, on the Great Plains. The study area includes parts of Texas, eastern New Mexico, the Oklahoma Panhandle and southern Kansas. The region is shown to have uniformly distributed winds of relatively high velocity, with average wind power density of 0.53 kW/m/sup 2/ at 30 m height at Amarillo, Texas, a representative location. The annual period of calm is extremely low. Three separate compressed air storage systems with good potential were analyzed in detail, and two potential pumped-hydro facilities were identified and given preliminary consideration. Aquifer storage of compressed air is a promising possibility in the region.

Inter-utility trade review

International Nuclear Information System (INIS)

Warnes, E.M.; Vaahedi, E.

1991-01-01

The National Energy Board was requested by the Minister of Energy, Mines and Resources to identify possible measures to improve cooperation among Canadian electrical utilities and to enhance access for buyers and sellers of electricity to available transmission capacity through intervening systems for wheeling purposes. To identify measures to improve cooperation, a questionnaire was sent to electric utilities and other interested parties on the present extent and future possibilities for inter-utility cooperation. The questionnaire and its results are presented. It was found that there already exists a significant amount of inter-utility cooperation in Canada. Such cooperation generally involves interchanges of economy energy, non-economic capacity and energy, coordinated operation, resource sharing, maintenance scheduling, emergency supports, etc. There is a very limited degree of integrated generation expansion planning. Typically, these agreements are carried out under interconnection agreements negotiated on a bi-lateral basis. The highest current degree of cooperation exists under the auspices of the Alberta interconnected power system pool. Wheeling is limited and generally restricted to cases where the sender and receiver are the same entity or where power is wheeled to a utility purchasing it from the wheeler's system. 2 figs., 3 tabs

Retrofitting adjustable speed drives for large induction motors

International Nuclear Information System (INIS)

Wuestefeld, M.R.; Merriam, C.H.; Porter, N.S.

2004-01-01

Adjustable speed drives (ASDs) are used in many power plants to control process flow by varying the speed of synchronous and induction motors. In applications where the flow requirements vary significantly, ASDs reduce energy and maintenance requirements when compared with drag valves, dampers or other methods to control flow. Until recently, high horsepower ASDs were not available for induction motors. However, advances in power electronics technology have demonstrated the reliability and cost effectiveness of ASDs for large horsepower induction motors. Emphasis on reducing operation and maintenance costs and increasing the capacity factor of nuclear power plants has led some utilities to consider replacing flow control devices in systems powered by large induction motors with ASDs. ASDs provide a high degree of reliability and significant energy savings in situations where full flow operation is not needed for a substantial part of the time. This paper describes the basic adjustable speed drive technologies available for large induction motor applications, ASD operating experience and retrofitting ASDs to replace the existing GE Boiling Water Reactor recirculation flow control system

Geospatial Optimization of Siting Large-Scale Solar Projects

Energy Technology Data Exchange (ETDEWEB)

Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Quinby, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Caulfield, Emmet [Stanford Univ., CA (United States); Gerritsen, Margot [Stanford Univ., CA (United States); Diffendorfer, Jay [U.S. Geological Survey, Boulder, CO (United States); Haines, Seth [U.S. Geological Survey, Boulder, CO (United States)

2014-03-01

Recent policy and economic conditions have encouraged a renewed interest in developing large-scale solar projects in the U.S. Southwest. However, siting large-scale solar projects is complex. In addition to the quality of the solar resource, solar developers must take into consideration many environmental, social, and economic factors when evaluating a potential site. This report describes a proof-of-concept, Web-based Geographical Information Systems (GIS) tool that evaluates multiple user-defined criteria in an optimization algorithm to inform discussions and decisions regarding the locations of utility-scale solar projects. Existing siting recommendations for large-scale solar projects from governmental and non-governmental organizations are not consistent with each other, are often not transparent in methods, and do not take into consideration the differing priorities of stakeholders. The siting assistance GIS tool we have developed improves upon the existing siting guidelines by being user-driven, transparent, interactive, capable of incorporating multiple criteria, and flexible. This work provides the foundation for a dynamic siting assistance tool that can greatly facilitate siting decisions among multiple stakeholders.

Thin absorbers for large-area soft X-ray microcalorimeters

Energy Technology Data Exchange (ETDEWEB)

Rocks, L. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States)]. E-mail: rocks@wisp.physics.wisc.edu; Anderson, M.B. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Bilgri, N. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Brekosky, R. [NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Gwynne Crowder, S. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Figueroa-Feliciano, E. [NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Kelley, R. [NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Kilbourne, C.A. [NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Lai, T. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Lindeman, M.A. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Man, J. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); McCammon, D. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Nelms, K.L. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Porter, F.S. [NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Sivananthan, S. [University of Illinois at Chicago, Chicago, IL 60607 (United States); Vidugiris, G. [Department of Physics, University of Wisconsin, Madison, WI 53706 (United States); Zhao, J. [University of Illinois at Chicago, Chicago, IL 60607 (United States)

2006-04-15

The X-ray Quantum Calorimeter (XQC) sounding rocket experiment utilizes a microcalorimeter array for observing the diffuse soft X-ray background. Observations of such low surface-brightness targets require a large-area detector. We will be using an array of large absorbers. Good absorbers must rapidly and completely thermalize photons, have small heat capacity for high stopping efficiency and have good lateral thermal transport. For observing the soft X-ray background (energies <1 keV), the volume and heat capacity of absorber material can be kept to a minimum by making the absorbers only as thick as needed for high quantum efficiency at these low energies. These thin, large-area absorbers are not self-supporting and have poor lateral heat transport. Depositing the absorber material on a Si substrate provides support and improves lateral thermal conduction. We present heat capacity results for thin HgTe and thin Bi, each on Si substrates. We also describe the HgTe absorber fabrication.

Advanced Large Area Plastic Scintillator Project (ALPS): Final Report

Energy Technology Data Exchange (ETDEWEB)

Jordan, David V.; Reeder, Paul L.; Todd, Lindsay C.; Warren, Glen A.; McCormick, Kathleen R.; Stephens, Daniel L.; Geelhood, Bruce D.; Alzheimer, James M.; Crowell, Shannon L.; Sliger, William A.

2008-02-05

The advanced Large-Area Plastic Scintillator (ALPS) Project at Pacific Northwest National Laboratory investigated possible technological avenues for substantially advancing the state-of-the-art in gamma-ray detection via large-area plastic scintillators. The three predominant themes of these investigations comprised the following: * Maximizing light collection efficiency from a single large-area sheet of plastic scintillator, and optimizing hardware event trigger definition to retain detection efficiency while exploiting the power of coincidence to suppress single-PMT "dark current" background; * Utilizing anti-Compton vetoing and supplementary spectral information from a co-located secondary, or "Back" detector, to both (1) minimize Compton background in the low-energy portion of the "Front" scintillator's pulse-height spectrum, and (2) sharpen the statistical accuracy of the front detector's low-energy response prediction as impelmented in suitable energy-windowing algorithms; and * Investigating alternative materials to enhance the intrinsic gamma-ray detection efficiency of plastic-based sensors.

Solvent-Free Patterning of Colloidal Quantum Dot Films Utilizing Shape Memory Polymers

Directory of Open Access Journals (Sweden)

Hohyun Keum

2017-01-01

Full Text Available Colloidal quantum dots (QDs with properties that can be tuned by size, shape, and composition are promising for the next generation of photonic and electronic devices. However, utilization of these materials in such devices is hindered by the limited compatibility of established semiconductor processing techniques. In this context, patterning of QD films formed from colloidal solutions is a critical challenge and alternative methods are currently being developed for the broader adoption of colloidal QDs in functional devices. Here, we present a solvent-free approach to patterning QD films by utilizing a shape memory polymer (SMP. The high pull-off force of the SMP below glass transition temperature (Tg in conjunction with the conformal contact at elevated temperatures (above Tg enables large-area, rate-independent, fine patterning while preserving desired properties of QDs.

A computational study of ethylene–air sooting flames: Effects of large polycyclic aromatic hydrocarbons

KAUST Repository

Selvaraj, Prabhu; Arias, Paul G.; Lee, Bok Jik; Im, Hong G.; Wang, Yu; Gao, Yang; Park, Sungwoo; Sarathy, Mani; Lu, Tianfeng; Chung, Suk-Ho

2015-01-01

formation to various chemical pathways for large polycyclic aromatic hydrocarbons (PAH). The gas-phase chemical mechanism adopted the KAUST-Aramco PAH Mech 1.0, which utilized the AramcoMech 1.3 for gas-phase reactions validated for up to C2 fuels

Energy and exergy utilizations of the Chinese urban residential sector

International Nuclear Information System (INIS)

Liu, Yanfeng; Li, Yang; Wang, Dengjia; Liu, Jiaping

2014-01-01

Highlights: • The energy and exergy use in China’s urban residential sector between 2002 and 2011 are analyzed. • The primary locations and causes of energy and exergy losses in the CURS are identified. • The large gap between the energy and exergy efficiencies implies great potential for energy saving. • The exergy utilization can be improved by using appropriate technology, management and policy. - Abstract: In this paper, the energy and exergy utilizations in the Chinese urban residential sector (CURS) are analyzed by considering the energy and exergy flows for the years between 2002 and 2011. The energy and exergy efficiencies of this sector are calculated to examine the potential for advancing the ‘true’ energy efficiency and determine the real energy losses. The results demonstrate large differences between the overall energy efficiencies (62.8–70.2%) and the exergy efficiencies (11.0–12.2%) for the years analyzed. The sizable gap between the energy and exergy efficiencies implies a high potential for energy savings in the CURS. Future energy saving strategies should pay more attention to the improvement in exergy efficiencies. Moreover, it is found that direct fuel use constituted the primary exergy losses of the CURS; coal-fired boiler heating systems cause approximately 35% of the total exergy losses. Gas stoves, cogeneration systems, coal stoves and gas water heaters constitute 15.3%, 15%, 5.5% and 4.9% of the total exergy losses, respectively

Electric utility companies and geothermal power

Science.gov (United States)

Pivirotto, D. S.

1976-01-01

The requirements of the electric utility industry as the primary potential market for geothermal energy are analyzed, based on a series of structured interviews with utility companies and financial institution executives. The interviews were designed to determine what information and technologies would be required before utilities would make investment decisions in favor of geothermal energy, the time frame in which the information and technologies would have to be available, and the influence of the governmental politics. The paper describes the geothermal resources, electric utility industry, its structure, the forces influencing utility companies, and their relationship to geothermal energy. A strategy for federal stimulation of utility investment in geothermal energy is suggested. Possibilities are discussed for stimulating utility investment through financial incentives, amelioration of institutional barriers, and technological improvements.

[Syagrus romanzoffiana (Arecaceae) seed utilization by ants in a secondary forest in South Brazil].

Science.gov (United States)

Silva, Fernanda R; Begnini, Romualdo M; Klier, Vinícius A; Scherer, Karla Z; Lopes, Benedito C; Castellani, Tânia T

2009-01-01

Ants can nest in a wide variety of substracts. This paper shows Syagrus romanzoffiana seed utilization by ants in an Atlantic secondary forest. We report 29 seeds occupied by small-bodied ants, with 27 of them showing at least two ant development stages. Although a large number of seeds were sampled, a low level of ant occupation was observed.

17 CFR 250.41 - Exemption of public utility subsidiaries with respect to limited acquisition of utility assets.

Science.gov (United States)

2010-04-01

... Exemption of public utility subsidiaries with respect to limited acquisition of utility assets. Any public... derived from its operations as a public-utility company during the preceding calendar year. (d... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Exemption of public utility...

The role of parental health care utilization in children's unnecessary utilization in China: evidence from Shaanxi province.

Science.gov (United States)

Zhang, Yi; Zhou, Zhongliang; Si, Yafei

2017-03-09

China has a large population of children under 18 years of age, whose health is of great concern to the Chinese health care system. However, few studies have been conducted to analyze the factors associated with children's unnecessary health care utilization in China. The objective of this study is to provide some empirical evidence on this issue by investigating the role of parental health care utilization in children's unnecessary health care use. The data were obtained from the fifth Health Service Survey of Shaanxi province in 2013. We employed three dependent variables to measure children's health care utilization: the number of children's outpatient visits during the past 2 weeks, whether or not infusion was used if the child had any outpatient visits during the past 2 weeks, and the number of children's inpatient visits during last year. Based on specific characteristics of these outcome variables, negative binomial models were used for the non-negative numbers of outpatient and inpatient visits, while a probit model was used for the zero-one indicator variable showing whether infusion was used during outpatient visits. Based on a sample of 11,024 children, our results of multivariate analysis showed that children whose parents used outpatient care were estimated to have a larger number of outpatient visits than those whose parents did not have outpatient visits in the past 2 weeks (with a difference of 0.0393 visits). Among children having outpatient visits in the last 2 weeks, the probability of obtaining infusion was 57.01 percentage points higher for children whose parents used infusion in the past 2 weeks than the probability for those whose parents did not use infusion. The predicted number of inpatient visits was higher for children whose parents used inpatient services in the last year, compared with the group whose parents did not use (with a difference of 0.0567 visits). Moreover, we noted that the positive association between parental and

Privacy calculus and its utility for personalization services in e-commerce : An analysis of consumer decision-making

NARCIS (Netherlands)

Zhu, H.; Ou, Carol; van den Heuvel, Willem-Jan; Liu, H.W.

Modern consumers increasingly embrace the personalization of services. Whether to disclose private information to companies for the sake of receiving personalized service is largely contingent to relative valuations and the utility of private information. Unfortunately, there is a lack of balanced

Simple utility functions with Giffen demand

DEFF Research Database (Denmark)

Sørensen, Peter Norman

2007-01-01

Simple utility functions with the Giffen property are presented: locally, the demand curve for a good is upward sloping. The utility functions represent continuous, monotone, convex preferences......Simple utility functions with the Giffen property are presented: locally, the demand curve for a good is upward sloping. The utility functions represent continuous, monotone, convex preferences...

EXPLAINING THE GAP IN ANTENATAL CARE SERVICE UTILIZATION BETWEEN YOUNGER AND OLDER MOTHERS IN GHANA.

Science.gov (United States)

Boamah, Sheila A; Amoyaw, Jonathan; Luginaah, Isaac

2016-05-01

Over two-thirds of pregnant women (69%) have at least one antenatal care (ANC) coverage contact in sub-Saharan Africa. However, to achieve the full life-saving potential that ANC promises for women and babies, a nuanced understanding of age-specific gaps in utilization of ANC services is required. Using the 2008 Ghana Demographic and Health Survey of 1456 individuals, this study examined the disparities in the use of ANC services between younger and older mothers by applying four counterfactual decomposition techniques. The results show that cross-group differences in the explanatory variables largely account for the differentials in ANC service utilization between younger and older mothers. Birth order (parity) accounts for the largest share of the contribution to the overall explained gap in ANC utilization between the younger and older mothers, suggesting that ANC differentials between the two groups are probably due to biosocial factors. To a lesser extent, wealth status of the two groups also contributes to the overall explained gap in ANC service utilization. The policy implications of these findings are that in order to bridge the ANC service utilization gap between the two groups, policymakers must systematically address gaps in cross-group differences in the explanatory variables in order to increase the utilization of ANC to attain the minimum recommendation of four visits as per World Health Organization guidelines.

Repeated regulatory failures: British electric utilities, 1919--1937

Science.gov (United States)

van der Werf, Ysbrand John

This dissertation uses previously unexamined firm-level data to look at British electric utilities during the 1919--1937 period. The persistent influence of the 1882 and 1888 Electric Lighting Acts had a significant role in perpetuating the inefficient market structure and high costs of the industry. First, I examine factors that influence costs in 1919 and compare the relative cost efficiency of municipally-owned and investor-owned utilities (munis and IOUs). Scale and load factor are found to be more important than ownership in influencing costs, although IOUs enjoy a scale advantage. Given costs, there is no difference in prices between IOUs and munis, and on average prices were 20 percent below monopoly prices. Looking at the 1919--1928 period and examining changes in the industry as measured by the firms' choices in frequency, current, and interconnections with other utilities shows evidence for a great deal of change, which occurred in statistically predictable ways. Utilities are standardizing the type of current produced, and the eventual localized standard frequencies were selected by 1907. There is little in the way of market rivalry between mum's and IOUs but large munis are less likely to build networks and sell in the wholesale market. Finally, I compare the changes that occurred during the 1919--1928 period, under the weak intervention of the Electricity Commissioners, with those of the 1928--1937 period, under the strong intervention of the Central Electricity Board. Without the CEB localized frequency standards would likely have remained in place. The CEB intervened directly in the wholesale market, but contrary to common perceptions, this strong intervention had relatively little impact on trends observed in the industry under the weak intervention of the 1919--1928 period: the CEB reduced prices and costs by no more than about 15 percent and was responsible for at most a quarter of their decline during the 1928--37 period.

Markets: green utilities

International Nuclear Information System (INIS)

Wood, Elisa

2006-01-01

Publicly owned utilities have consistently led the United States in the rate of customer participation in green power programmes. The US has about 2000 community and state-owned utilities, which serve 43 million customers and account for about 16.6% of kilowatt-hour sales to consumers. In all, public power is responsible for about 10% of the nation's installed electric capacity. Investor owned utilities account for 39%, with the remainder of the nation's power mostly from independent power generators. Although IOUs have almost four times as much electric capacity as public power, they edge out public power by only a small margin when it comes to renewable capacity. IOUs are responsible for 24,577.5 MW of renewable capacity, compared to the 21,338 MW installed by public power. The reasons discussed by the author range from small town advantage to clean and cheap power. (Author)

Development and utilization of new energy in China

Energy Technology Data Exchange (ETDEWEB)

Qu Shiyuan (Academia Sinica, Beijing (CN). Energy Research Inst.)

1990-01-01

Since the foundation of the People's Republic of China, the Chinese Government has paid great attention to the development and utilization of new energy resources. Besides the development of biomass gas to provide energy for daily life in rural areas, China has also done much research and development in solar, wind, geothermal and marine energy to substitute alternative energy supplies, especially in the remote regions. Although China has abundant conventional energy resources the average energy resource per capita is low due to the large population. In recent years, the gap between energy consumption and supply has become larger and China will have to develop actively new energy industries at the same time as developing conventional energy. (author).

Design of an omnidirectional single-point photodetector for large-scale spatial coordinate measurement

Science.gov (United States)

Xie, Hongbo; Mao, Chensheng; Ren, Yongjie; Zhu, Jigui; Wang, Chao; Yang, Lei

2017-10-01

In high precision and large-scale coordinate measurement, one commonly used approach to determine the coordinate of a target point is utilizing the spatial trigonometric relationships between multiple laser transmitter stations and the target point. A light receiving device at the target point is the key element in large-scale coordinate measurement systems. To ensure high-resolution and highly sensitive spatial coordinate measurement, a high-performance and miniaturized omnidirectional single-point photodetector (OSPD) is greatly desired. We report one design of OSPD using an aspheric lens, which achieves an enhanced reception angle of -5 deg to 45 deg in vertical and 360 deg in horizontal. As the heart of our OSPD, the aspheric lens is designed in a geometric model and optimized by LightTools Software, which enables the reflection of a wide-angle incident light beam into the single-point photodiode. The performance of home-made OSPD is characterized with working distances from 1 to 13 m and further analyzed utilizing developed a geometric model. The experimental and analytic results verify that our device is highly suitable for large-scale coordinate metrology. The developed device also holds great potential in various applications such as omnidirectional vision sensor, indoor global positioning system, and optical wireless communication systems.

A facile alternative technique for large-area graphene transfer via sacrificial polymer

Directory of Open Access Journals (Sweden)

Eric Auchter

2017-12-01

Full Text Available A novel method of transferring large-area graphene sheets onto a variety of substrates using Formvar (polyvinyl formal is presented. Due to the ease at which formvar can be dissolved in chloroform this method allows for a consistent, a clean, and a more rapid transfer than other techniques including the PMMA assisted one. This novel transfer method is demonstrated by transferring large-area graphene onto a range of substrates including commercial TEM grids, silicon dioxide and glass. Raman spectroscopy was used to confirm the presence of graphene and characterize the morphological properties of the large-area sheets. SEM and AFM analyses demonstrated the effectiveness of our rapid transfer technique for clean crystalline large-area graphene sheets. The removal of the sacrificial polymer was found to be one to two orders of magnitude faster than PMMA methods. Ultimately this facile transfer technique offers new opportunities for a wide range of applications for large-area graphene through the utilization of a new sacrificial polymer.

"Utilizing" signal detection theory.

Science.gov (United States)

Lynn, Spencer K; Barrett, Lisa Feldman

2014-09-01

What do inferring what a person is thinking or feeling, judging a defendant's guilt, and navigating a dimly lit room have in common? They involve perceptual uncertainty (e.g., a scowling face might indicate anger or concentration, for which different responses are appropriate) and behavioral risk (e.g., a cost to making the wrong response). Signal detection theory describes these types of decisions. In this tutorial, we show how incorporating the economic concept of utility allows signal detection theory to serve as a model of optimal decision making, going beyond its common use as an analytic method. This utility approach to signal detection theory clarifies otherwise enigmatic influences of perceptual uncertainty on measures of decision-making performance (accuracy and optimality) and on behavior (an inverse relationship between bias magnitude and sensitivity optimizes utility). A "utilized" signal detection theory offers the possibility of expanding the phenomena that can be understood within a decision-making framework. © The Author(s) 2014.

Using isotope 36Cl to study utilization of Cl by crops and distribution and movement of Cl in soil

International Nuclear Information System (INIS)

Pan Jiarong; Wen Xianfang; Tang Nianxin

1991-06-01

Results from using isotope 36 Cl show that a large quantity of Cl is absorbed and utilized by spring wheat, cotton and tobacco from the chloride fertilizers. The utilization coefficient of Cl increases with the growing time of plants and reaches peak at mature stage. The utilization coefficient of above plants are 26.72%, 3317% and 26.19% respectively. The absorption and utilization of residual Cl in soil is much smaller than that in fertilizers, and the utilization coefficient is decreasing with the increasing of growth season. For spring wheat, utilization coefficient is 12.7% in second season and 9.3% in third season. The ability of absorbing and utilizing Cl from organic materials by crops is very low and the utilization coefficient is 10% or less, that depends on circumstances. For rice the utilization coefficient is 3.1% in dry land and 24.3% in flooded land. The distribution of absorbed Cl is mainly in stalk, a little in husk and a few in seeds and roots. After irrigating water it is equivalent to 9.1 mm of rainfall in soil, the Cl moves rapidly to depth 10∼12 cm. Cl moves faster in porous soil than in clay soil, and faster in horizontal direction than in vertical direction

Utilizing Electric Vehicles to Assist Integration of Large Penetrations of Distributed Photovoltaic Generation Capacity

Energy Technology Data Exchange (ETDEWEB)

Tuffner, Francis K.; Chassin, Forrest S.; Kintner-Meyer, Michael CW; Gowri, Krishnan

2012-11-30

Executive Summary Introduction and Motivation This analysis provides the first insights into the leveraging potential of distributed photovoltaic (PV) technologies on rooftop and electric vehicle (EV) charging. Either of the two technologies by themselves - at some high penetrations – may cause some voltage control challenges or overloading problems, respectively. But when combined, there – at least intuitively – could be synergistic effects, whereby one technology mitigates the negative impacts of the other. High penetration of EV charging may overload existing distribution system components, most prominently the secondary transformer. If PV technology is installed at residential premises or anywhere downstream of the secondary transformer, it will provide another electricity source thus, relieving the loading on the transformers. Another synergetic or mitigating effect could be envisioned when high PV penetration reverts the power flow upward in the distribution system (from the homes upstream into the distribution system). Protection schemes may then no longer work and voltage violation (exceeding the voltage upper limited of the ANSI voltage range) may occur. In this particular situation, EV charging could absorb the electricity from the PV, such that the reversal of power flow can be reduced or alleviated. Given these potential mutual synergistic behaviors of PV and EV technologies, this project attempted to quantify the benefits of combining the two technologies. Furthermore, of interest was how advanced EV control strategies may influence the outcome of the synergy between EV charging and distributed PV installations. Particularly, Californian utility companies with high penetration of the distributed PV technology, who have experienced voltage control problems, are interested how intelligent EV charging could support or affect the voltage control

Technology assessment of long distance liquid natural gas pipelines. Phase 8. Cold utilization and rural service

Energy Technology Data Exchange (ETDEWEB)

1977-02-01

This phase of the investigation presents a summary of material relating to: (1) actual or potential applications for the very large refrigeration effects inherent in the vaporization of liquid natural gas; and (2) rural service gas supplies adjacent to the route of a trunk liquid natural gas line. A variety of concepts for cold utilization are discussed. The Canadian prospects for cold utilization include: electric power generation; oxygen production for integration with a coal gasification project; and the use of refrigeration stages in the petrochemical processing of natural gas, for example, ethane separation and processing to produce ethylene and ammonia.

Accelerating Relevance Vector Machine for Large-Scale Data on Spark

Directory of Open Access Journals (Sweden)

Liu Fang

2017-01-01

Full Text Available Relevance vector machine (RVM is a machine learning algorithm based on a sparse Bayesian framework, which performs well when running classification and regression tasks on small-scale datasets. However, RVM also has certain drawbacks which restricts its practical applications such as (1 slow training process, (2 poor performance on training large-scale datasets. In order to solve these problem, we propose Discrete AdaBoost RVM (DAB-RVM which incorporate ensemble learning in RVM at first. This method performs well with large-scale low-dimensional datasets. However, as the number of features increases, the training time of DAB-RVM increases as well. To avoid this phenomenon, we utilize the sufficient training samples of large-scale datasets and propose all features boosting RVM (AFB-RVM, which modifies the way of obtaining weak classifiers. In our experiments we study the differences between various boosting techniques with RVM, demonstrating the performance of the proposed approaches on Spark. As a result of this paper, two proposed approaches on Spark for different types of large-scale datasets are available.

Utilization of thorium in thermal reactors

International Nuclear Information System (INIS)

Srinivasan, K.R.; Nakra, A.N.

1978-01-01

Large deposits of thorium are found in India. 233 U produced by neutron capture in 232 Th is a more valuable fuel for thermal reactors than the plutonium that results from capture in 238 U. These two facts are the main reasons for the interest in utilizing thorium in power reactors. But natural thorium does not contain any fissile material and its capture cross section is nearly two and a half times that of 238 U. These have made the fuelling cost high. However, in certain conditions and certain types of reactors the costs are comparable with those using uranium fuel. The relative cost effectiveness of different fuels is discussed. Apart from long term interest, the short term interest of using thorium fuel in RAPP type reactors is also briefly described. Finally the reactor physics experiments using thorium fuel and their comparison with calculations are presented. (author)

Animation company "Fast Forwards" production with HP Utility Data Center; film built using Adaptive Enterprise framework enabled by shared, virtual resource

CERN Multimedia

2003-01-01

Hewlett Packard have produced a commercial-quality animated film using an experimental rendering service from HP Labs and running on an HP Utility Data Center (UDC). The project demonstrates how computing resources can be managed virtually and illustrates the value of utility computing, in which an end-user taps into a large pool of virtual resources, but pays only for what is used (1 page).

An emerging pollutant contributing to the cytotoxicity of MSWI ash wastes: Strontium

International Nuclear Information System (INIS)

Huang, Wu-Jang; Tang, Hsing-Chuan; Lin, Kae-Long; Liao, Ming-Huei

2010-01-01

In this study, we used the multiple toxicity characteristic leaching procedure to test the long-term leaching behavior of bottom ash, scrubber residue, and baghouse ash from a municipal solid waste incinerator (MSWI). We used the short-term viability percentage of African green monkey kidney cells (Vero cells) as a bioindicator to investigate the cytotoxicity of the leachates from the MSWI ash wastes. We found that strontium was a significant contributor to the cytotoxicity of the bottom ash.

An emerging pollutant contributing to the cytotoxicity of MSWI ash wastes: strontium.

Science.gov (United States)

Huang, Wu-Jang; Tang, Hsing-Chuan; Lin, Kae-Long; Liao, Ming-Huei

2010-01-15

In this study, we used the multiple toxicity characteristic leaching procedure to test the long-term leaching behavior of bottom ash, scrubber residue, and baghouse ash from a municipal solid waste incinerator (MSWI). We used the short-term viability percentage of African green monkey kidney cells (Vero cells) as a bioindicator to investigate the cytotoxicity of the leachates from the MSWI ash wastes. We found that strontium was a significant contributor to the cytotoxicity of the bottom ash.

An emerging pollutant contributing to the cytotoxicity of MSWI ash wastes: Strontium

Energy Technology Data Exchange (ETDEWEB)

Huang, Wu-Jang, E-mail: wjhuang@mail.npust.edu.tw [Department of Environmental Engineering and Science, National Ping-Tung University of Science and Technology, 912 Ping-Tung, Taiwan (China); Tang, Hsing-Chuan [Department of Environmental Engineering and Science, National Ping-Tung University of Science and Technology, 912 Ping-Tung, Taiwan (China); Lin, Kae-Long [Department of Environmental Engineering, National I-Lan University, 260 I-Lan, Taiwan (China); Liao, Ming-Huei [Department of Veterinary Medicine, National Ping-Tung University of Science and Technology, 912 Ping-Tung, Taiwan (China)

2010-01-15

In this study, we used the multiple toxicity characteristic leaching procedure to test the long-term leaching behavior of bottom ash, scrubber residue, and baghouse ash from a municipal solid waste incinerator (MSWI). We used the short-term viability percentage of African green monkey kidney cells (Vero cells) as a bioindicator to investigate the cytotoxicity of the leachates from the MSWI ash wastes. We found that strontium was a significant contributor to the cytotoxicity of the bottom ash.

Clinical utility of fetal autopsy and its impact on genetic counseling.

Science.gov (United States)

Nayak, Shalini S; Shukla, Anju; Lewis, Leslie; Kadavigere, Rajagopal; Mathew, Mary; Adiga, Prashanth K; Vasudeva, Akhila; Kumar, Pratap; Shetty, Jyothi; Shah, Hitesh; Girisha, Katta M

2015-07-01

We aimed to analyze the utility of fetal autopsy in terms of its contribution to establishing a definitive diagnosis and its impact on genetic counseling. Detailed fetal autopsy was carried out in fetuses referred for examination. Clinical utility of fetal autopsy and its impact on counseling were measured by adapting previously published parameters. We performed autopsy in 230 fetuses. There were 106 cases with single system and 92 cases with multisystem involvement. We confirmed prenatal findings in 23% of cases and observed additional findings in 37% of cases. In 23% of cases, autopsy findings differed enough to change the diagnosis. However, in 17% of fetuses, no cause of fetal loss was determined. Risk of recurrence became clear in 30.3% of the fetuses, and risk remained the same, but the diagnosis was different in 4.8% of cases after autopsy. Hence, autopsy led to refinement of the risk of recurrence in 36% of cases. Autopsy aided prenatal counseling of couples in 77% of cases by either confirming the prenatal findings (35%) or providing new information/ruling out a diagnosis (42%). The present study quantifies the utility of fetal autopsy in reproductive genetic counseling in a large cohort. © 2015 John Wiley & Sons, Ltd.

Institute for Fusion Research and Large Helical Device program

International Nuclear Information System (INIS)

Iiyoshi, Atsuo

1989-01-01

In the research on nuclear fusion, the final objective is to materialize nuclear fusion reactors, and for the purpose, it is necessary to cause nuclear combustion by making the plasma of higher than 100 million deg and confine it for a certain time. So far in various universities, the researches on diversified fusion processes have been advanced, but in February, 1986, the Science Council issued the report 'Nuclear fusion research in universities hereafter'. As the next large scale device, an external conductor system helical device was decided, and it is desirable to found the organization for joint utilization by national universities to promote the project. The researches on the other processes are continued by utilizing the existing facilitie. The reason of selecting a helical device is the data base of the researches carried out so far can be utilized sufficiently, it is sufficiently novel even after 10 years from now, and many researchers can be collected. The place of the research is Toki City, Gifu Prefecture, where the Institute of Plasma Physics, Nagoya University, is to be moved. The basic concept of the superconducting helical device project, the trend of nuclear fusion development in the world, the physical research using a helical system and so on are reported. (Kako, I.)

Large-scale DCMs for resting-state fMRI

Directory of Open Access Journals (Sweden)

Adeel Razi

2017-01-01

Full Text Available This paper considers the identification of large directed graphs for resting-state brain networks based on biophysical models of distributed neuronal activity, that is, effective connectivity. This identification can be contrasted with functional connectivity methods based on symmetric correlations that are ubiquitous in resting-state functional MRI (fMRI. We use spectral dynamic causal modeling (DCM to invert large graphs comprising dozens of nodes or regions. The ensuing graphs are directed and weighted, hence providing a neurobiologically plausible characterization of connectivity in terms of excitatory and inhibitory coupling. Furthermore, we show that the use of Bayesian model reduction to discover the most likely sparse graph (or model from a parent (e.g., fully connected graph eschews the arbitrary thresholding often applied to large symmetric (functional connectivity graphs. Using empirical fMRI data, we show that spectral DCM furnishes connectivity estimates on large graphs that correlate strongly with the estimates provided by stochastic DCM. Furthermore, we increase the efficiency of model inversion using functional connectivity modes to place prior constraints on effective connectivity. In other words, we use a small number of modes to finesse the potentially redundant parameterization of large DCMs. We show that spectral DCM—with functional connectivity priors—is ideally suited for directed graph theoretic analyses of resting-state fMRI. We envision that directed graphs will prove useful in understanding the psychopathology and pathophysiology of neurodegenerative and neurodevelopmental disorders. We will demonstrate the utility of large directed graphs in clinical populations in subsequent reports, using the procedures described in this paper.

Microwave reactor for utilizing waste materials

Directory of Open Access Journals (Sweden)

M. Pigiel

2010-01-01

Full Text Available The paper presents a designed and manufactured, semi-industrial microwave reactor for thermal utilization of asbestos-bearing wastes. Presented are also semi-industrial tests of utilizing such wastes. It was found that microwave heating can be applied for utilizing asbestos with use of suitable wetting agents. The wetting agents should ensure continuous heating process above 600 °C, as well as uniform heat distribution in the whole volume of the utilized material. Analysis of the neutralization process indicates a possibility of presenting specific, efficient and effective process parameters of utilizing some asbestos-bearing industrial wastes.

A new hybrid meta-heuristic algorithm for optimal design of large-scale dome structures

Science.gov (United States)

Kaveh, A.; Ilchi Ghazaan, M.

2018-02-01

In this article a hybrid algorithm based on a vibrating particles system (VPS) algorithm, multi-design variable configuration (Multi-DVC) cascade optimization, and an upper bound strategy (UBS) is presented for global optimization of large-scale dome truss structures. The new algorithm is called MDVC-UVPS in which the VPS algorithm acts as the main engine of the algorithm. The VPS algorithm is one of the most recent multi-agent meta-heuristic algorithms mimicking the mechanisms of damped free vibration of single degree of freedom systems. In order to handle a large number of variables, cascade sizing optimization utilizing a series of DVCs is used. Moreover, the UBS is utilized to reduce the computational time. Various dome truss examples are studied to demonstrate the effectiveness and robustness of the proposed method, as compared to some existing structural optimization techniques. The results indicate that the MDVC-UVPS technique is a powerful search and optimization method for optimizing structural engineering problems.

Health insurance benefit design and healthcare utilization in northern rural China.

Science.gov (United States)

Wang, Hong; Liu, Yu; Zhu, Yan; Xue, Lei; Dale, Martha; Sipsma, Heather; Bradley, Elizabeth

2012-01-01

Poverty due to illness has become a substantial social problem in rural China since the collapse of the rural Cooperative Medical System in the early 1980s. Although the Chinese government introduced the New Rural Cooperative Medical Schemes (NRCMS) in 2003, the associations between different health insurance benefit package designs and healthcare utilization remain largely unknown. Accordingly, we sought to examine the impact of health insurance benefit design on health care utilization. We conducted a cross-sectional study using data from a household survey of 15,698 members of 4,209 randomly-selected households in 7 provinces, which were representative of the provinces along the north side of the Yellow River. Interviews were conducted face-to-face and in Mandarin. Our analytic sample included 9,762 respondents from 2,642 households. In each household, respondents indicated the type of health insurance benefit that the household had (coverage for inpatient care only or coverage for both inpatient and outpatient care) and the number of outpatient visits in the 30 days preceding the interview and the number of hospitalizations in the 365 days preceding the household interview. People who had both outpatient and inpatient coverage compared with inpatient coverage only had significantly more village-level outpatient visits, township-level outpatient visits, and total outpatient visits. Furthermore, the increased utilization of township and village-level outpatient care was experienced disproportionately by people who were poorer, whereas the increased inpatient utilization overall and at the county level was experienced disproportionately by people who were richer. The evidence from this study indicates that the design of health insurance benefits is an important policy tool that can affect the health services utilization and socioeconomic equity in service use at different levels. Without careful design, health insurance may not benefit those who are most in need

Handbook of evaluation of utility DSM programs. [Demand-Side Management (DSM)

Energy Technology Data Exchange (ETDEWEB)

Hirst, E.; Reed, J. (eds.); Bronfman, B.; Fitzpatrick, G.; Hicks, E.; Hirst, E.; Hoffman, M.; Keating, K.; Michaels, H.; Nadel, S.; Peters, J.; Reed, J.; Saxonis, W.; Schoen, A.; Violette, D.

1991-12-01

Program evaluation has become a central issue in the world of utility integrated resource planning. The DSM programs that utilities were operating to meet federal requirements or to improve customer relations are now becoming big business. DSM is being considered an important resource in a utility's portfolio of options. In the last five years, the amount of money that utilities have invested in DSM has grown exponentially in most regulatory jurisdictions. Market analysts are now talking about DSM being a $30 billion industry by the end of the decade. If the large volume of DSM-program investments was not enough to highlight the importance of evaluation, then the introduction of regulatory incentives has really focused the spotlight. This handbook was developed through a process that involved many of those people who represent the diverse constituencies of DSM-program evaluation. We have come to recognize the many technical disciplines that must be employed to evaluate DSM programs. An analysis might start out based on the principles of utility load research to find out what happened, but a combination of engineering and statistical methods must be used to triangulate'' an estimate of what would have happened without the program. The difference, of course, is that elusive but prized result of evaluation: what happened as the direct result of the DSM program. Technical performance of DSM measures is not the sole determinant of the answer, either. We also recognize the importance of such behavioral attributes of DSM as persistence and free ridership. Finally, DSM evaluation is meaningless without attention to planning an approach, communicating results to relevant decision-makers, and focusing as much on the process as the impacts of the program. These topics are all covered in this handbook.

Design of large aperture, low mass vacuum windows

International Nuclear Information System (INIS)

Mapes, M.; Leonhardt, W.J.

1993-01-01

Large aperture, low mass, thin vacuum windows are required to minimize beam loss in the beam lines of particle accelerators as the products of nuclear collisions move from upstream targets to downstream detectors. This article describes the design, fabrication, testing, and operating experience of a large rectangular vacuum window, 122 cmx61 cm, and two circular windows of 91.4 and 96.5 cm diam. These window designs utilize a composite Kevlar 29 fabric and Mylar laminate as a window material with a typical combined thickness of 0.35 mm. Data for several material thicknesses are also presented. The windows are usually designed to withstand a pressure differential of two to three atmospheres to achieve the required factor of safety. These windows are typically used in the medium vacuum range of 10 -4 Torr. The equations used to predict the behavior of the window material will also be discussed

Utility Energy Services Contracts: Enabling Documents

Energy Technology Data Exchange (ETDEWEB)

None

2009-05-01

Utility Energy Services Contracts: Enabling Documents provides materials that clarify the authority for Federal agencies to enter into utility energy services contracts (UESCs), as well as sample documents and resources to ease utility partnership contracting.

Utility deregulation and AMR technology

International Nuclear Information System (INIS)

Moore, G.

1991-01-01

This article reviews the effects of deregulation on other utilities and services and examines how the electric utilities can avoid the worst of these effects and capitalize of the best aspects of competition in achieving marketing excellence. The article presents deregulation as a customer service and underscores the need for utilities to learn to compete aggressively and intelligently and provide additional services available through technology such as automated meter reading

Accelerating Large Data Analysis By Exploiting Regularities

Science.gov (United States)

Moran, Patrick J.; Ellsworth, David

2003-01-01

We present techniques for discovering and exploiting regularity in large curvilinear data sets. The data can be based on a single mesh or a mesh composed of multiple submeshes (also known as zones). Multi-zone data are typical to Computational Fluid Dynamics (CFD) simulations. Regularities include axis-aligned rectilinear and cylindrical meshes as well as cases where one zone is equivalent to a rigid-body transformation of another. Our algorithms can also discover rigid-body motion of meshes in time-series data. Next, we describe a data model where we can utilize the results from the discovery process in order to accelerate large data visualizations. Where possible, we replace general curvilinear zones with rectilinear or cylindrical zones. In rigid-body motion cases we replace a time-series of meshes with a transformed mesh object where a reference mesh is dynamically transformed based on a given time value in order to satisfy geometry requests, on demand. The data model enables us to make these substitutions and dynamic transformations transparently with respect to the visualization algorithms. We present results with large data sets where we combine our mesh replacement and transformation techniques with out-of-core paging in order to achieve significant speed-ups in analysis.

HUG - the Hydrogen Utility Group

International Nuclear Information System (INIS)

Tinkler, M.

2006-01-01

The Hydrogen Utility Group (HUG) was formally established in October 2005 by a group of leading electric utilities with a common interest in sharing hydrogen experiences and lessons learned. HUG's Mission Statement is: 'To accelerate utility integration of promising hydrogen energy related business applications through the coordinated efforts and actions of its members in collaboration with key stakeholders, including government agencies and utility support organizations.' In February 2006, HUG members presented a briefing to the US Senate Hydrogen and Fuel Cell Caucus in Washington, DC, outlining the significant role that the power industry should play in an emerging hydrogen economy. This presentation provides an overview of that briefing, summarizing the HUG's ongoing interests and activities

Optimization of workflow scheduling in Utility Management System with hierarchical neural network

Directory of Open Access Journals (Sweden)

Srdjan Vukmirovic

2011-08-01

Full Text Available Grid computing could be the future computing paradigm for enterprise applications, one of its benefits being that it can be used for executing large scale applications. Utility Management Systems execute very large numbers of workflows with very high resource requirements. This paper proposes architecture for a new scheduling mechanism that dynamically executes a scheduling algorithm using feedback about the current status Grid nodes. Two Artificial Neural Networks were created in order to solve the scheduling problem. A case study is created for the Meter Data Management system with measurements from the Smart Metering system for the city of Novi Sad, Serbia. Performance tests show that significant improvement of overall execution time can be achieved by Hierarchical Artificial Neural Networks.

Disaster and subsequent health care utilization: a longitudinal study among victims, their family members, and control subjects.

NARCIS (Netherlands)

Dorn, T.; Yzermans, C.J.; Kerssens, J.J.; Spreeuwenberg, P.M.M.; Zee, J. van der

2006-01-01

BACKGROUND: The impact of disasters on primary healthcare utilization is largely unknown. Moreover, it is often overlooked how disaster affects those closest to the primary victims, their family members. OBJECTIVE: The objective of this study was to examine the long-term effects of a catastrophic

Computational scalability of large size image dissemination

Science.gov (United States)

Kooper, Rob; Bajcsy, Peter

2011-01-01

We have investigated the computational scalability of image pyramid building needed for dissemination of very large image data. The sources of large images include high resolution microscopes and telescopes, remote sensing and airborne imaging, and high resolution scanners. The term 'large' is understood from a user perspective which means either larger than a display size or larger than a memory/disk to hold the image data. The application drivers for our work are digitization projects such as the Lincoln Papers project (each image scan is about 100-150MB or about 5000x8000 pixels with the total number to be around 200,000) and the UIUC library scanning project for historical maps from 17th and 18th century (smaller number but larger images). The goal of our work is understand computational scalability of the web-based dissemination using image pyramids for these large image scans, as well as the preservation aspects of the data. We report our computational benchmarks for (a) building image pyramids to be disseminated using the Microsoft Seadragon library, (b) a computation execution approach using hyper-threading to generate image pyramids and to utilize the underlying hardware, and (c) an image pyramid preservation approach using various hard drive configurations of Redundant Array of Independent Disks (RAID) drives for input/output operations. The benchmarks are obtained with a map (334.61 MB, JPEG format, 17591x15014 pixels). The discussion combines the speed and preservation objectives.

Utility requirements for fusion power

International Nuclear Information System (INIS)

DeBellis, R.J.

1977-03-01

A four-man month study was undertaken to identify utility requirements of fusion power and define a role for the utilities in the fusion development process during the 1980s. This report, preliminary in nature, serves mainly as a planning document for future requirements analyses. A requirements organization was defined to consist of three major chronological phases: research and development, plant installation, and plant operation. Thirty-seven requirements were identified, covering all categories. In addition, training, environment, safety, licensing, and utility model were identified as five matrix-type requirements. As the requirement definition process continued during the study period, comments received from utility representatives revealed a consistency of key issues in the fusion development process. These issues form the basis for the eventual establishment of definitive roles for the utilities during the 1980s. The issues are not meant to reflect a negative view of fusion, but are items that must be solved before fusion can be introduced commercially as an electrical power source. As a result of this requirements study, preliminary candidate roles for the utilities in the fusion development process during the 1980s were identified as public education, commercialization studies, industry investment analyses, training plan implementation, alternate reactor concept development, ERDA concept design review, and requirements refinement

Determination of 129I in large soil samples after alkaline wet disintegration

International Nuclear Information System (INIS)

Bunzl, K.; Kracke, W.

1992-01-01

Large soil samples (up to 500 g) can conveniently be disintegrated by hydrogen peroxide in an utility tank under alkaline conditions to determine subsequently 129 I by neutron activation analysis. Interfering elements such as Br are removed already before neutron irradiation to reduce the radiation exposure of the personnel. The precision of the method is 129 I also by the combustion method. (orig.)

Sea water desalination utilizing waste heat by low temperature evaporation

International Nuclear Information System (INIS)

Raha, A.; Srivastava, A.; Rao, I.S.; Majumdar, M.; Srivastava, V.K.; Tewari, P.K.

2007-01-01

Economics of a process is controlled by management of energy and resources. Fresh water has become most valued resource in industries. Desalination is a process by which fresh water resource is generated from sea water or brackish water, but it is an energy intensive process. The energy cost contributes around 25-40% to the total cost of the desalted water. Utilization of waste heat from industrial streams is one of the ecofriendly ways to produce low cost desalted water. Keeping this in mind Low Temperature Evaporation (LTE) desalination technology utilizing low quality waste heat in the form of hot water (as low as 50 deg C) or low pressure steam (0.13 bar) has been developed for offshore and land based applications to produce high purity water (conductivity < 2μS/cm) from sea water. The probability of the scale formation is practically eliminated by operating it at low temperature and controlling the brine concentration. It also does not require elaborate chemical pretreatment of sea water except chlorination, so it has no environmental impact. LTE technology has found major applications in nuclear reactors where large quantity of low quality waste heat is available to produce high quality desalted water for make up water requirement replacing conventional ion exchange process. Successful continuous operation of 30 Te/day LTE desalination plant utilizing waste heat from nuclear research reactor has demonstrated the safety, reliability, extreme plant availability and economics of nuclear desalination by LTE technology. It is also proposed to utilize waste heat from Main Heat Transport (MHT) purification circuit of Advanced Heavy Water Reactor (AHWR) to produce about 250 Te/ day high quality desalinated water by Low Temperature Evaporation (LTE) process for the reactor make up and plant utilization. Recently we have commissioned a 50 Te/day 2-effect low temperature desalination plant with cooling tower where the specific energy and cooling water requirement are

Utilities' ''obligation to serve'' under deregulation

International Nuclear Information System (INIS)

Alexander, C.B.

1997-01-01

The utility no longer has protected status, and the traditional franchise concept is under attack. Exclusive rights once conveyed to the utilities are being denied and not just in the area of gas sales. Exclusive rights once conveyed to utilities will be denied in more areas. State by state, the utilities' franchise is being examined to see which, if any, of its provisions are necessary in a deregulated environment. Can the free market provide everything that's been provided for many years under monopolistic arrangements? Some of the most critical and difficult of these provisions concern the obligation to serve, which utilities, in most states, have assumed as part of their franchise agreement. Regulators, courts, utilities, marketers and others are busy sorting through these issues, but resolution could take years. The paper discusses deregulation, universal service fee, representation without taxation, suppliers and marketer restrictions

Utilizing Photogrammetry and Strain Gage Measurement to Characterize Pressurization of an Inflatable Module

Science.gov (United States)

Valle, Gerard D.; Selig, Molly; Litteken, Doug; Oliveras, Ovidio

2012-01-01

This paper documents the integration of a large hatch penetration into an inflatable module. This paper also documents the comparison of analytical load predictions with measured results utilizing strain measurement. Strain was measured by utilizing photogrammetric measurement and through measurement obtained from strain gages mounted to selected clevises that interface with the structural webbings. Bench testing showed good correlation between strain measurement obtained from an extensometer and photogrammetric measurement especially after the fabric has transitioned through the low load/high strain region of the curve. Test results for the full-scale torus showed mixed results in the lower load and thus lower strain regions. Overall strain, and thus load, measured by strain gages and photogrammetry tracked fairly well with analytical predictions. Methods and areas of improvements are discussed.

Systems engineering for very large systems

Science.gov (United States)

Lewkowicz, Paul E.

Very large integrated systems have always posed special problems for engineers. Whether they are power generation systems, computer networks or space vehicles, whenever there are multiple interfaces, complex technologies or just demanding customers, the challenges are unique. 'Systems engineering' has evolved as a discipline in order to meet these challenges by providing a structured, top-down design and development methodology for the engineer. This paper attempts to define the general class of problems requiring the complete systems engineering treatment and to show how systems engineering can be utilized to improve customer satisfaction and profit ability. Specifically, this work will focus on a design methodology for the largest of systems, not necessarily in terms of physical size, but in terms of complexity and interconnectivity.

A central solar-industrial waste heat heating system with large scale borehole thermal storage

NARCIS (Netherlands)

Guo, F.; Yang, X.; Xu, L.; Torrens, I.; Hensen, J.L.M.

2017-01-01

In this paper, a new research of seasonal thermal storage is introduced. This study aims to maximize the utilization of renewable energy source and industrial waste heat (IWH) for urban district heating systems in both heating and non-heating seasons through the use of large-scale seasonal thermal

Subjective expected utility without preferences

OpenAIRE

Bouyssou , Denis; Marchant , Thierry

2011-01-01

This paper proposes a theory of subjective expected utility based on primitives only involving the fact that an act can be judged either "attractive" or "unattractive". We give conditions implying that there are a utility function on the set of consequences and a probability distribution on the set of states such that attractive acts have a subjective expected utility above some threshold. The numerical representation that is obtained has strong uniqueness properties.

Promotion of HANARO Utilization for Year 2004

International Nuclear Information System (INIS)

Sohn, J. M.; Kim, Y. J.; Kim, H. R.

2005-06-01

To activate the HANARO utilization by expanding HANARO utilization fields, recruiting and training new users. In order to promote the HANARO utilization, the following activities have been performed. The neutron usage fee in HANARO, Achievements of HANARO utilization, Project for Activation of the Research using HANARO, Operation and Management of HANARO Homepage, HANARO Workshop 2004, Management of HANARO related committees, Training of HANARO users, Related activities of HANARO publicity. The related activities to activate HANARO utilization have been carried out successfully. This report summarized the detailed activities to activate the HANARO utilization. They will be useful for expanding HANARO utilization in the near future

Promotion of HANARO utilization for year 2003

International Nuclear Information System (INIS)

Sohn, J. M.; Park, K. B.; Kim, Y. J.

2004-06-01

To activate the HANARO utilization by expanding HANARO utilization fields, recruiting and training new users. In order to promote the HANARO utilization, the following activities have been performed. - The neutron usage fee in HANARO - Achievements of HANARO utilization - Project for Activation of the Research using HANARO - Management of HANARO Homepage - HANARO Workshop 2003 - Operation and Management of HANARO related committees - Training of HANARO users - Related activities of HANARO publicity. The related activities to activate HANARO utilization have been carried out successfully. This report summarized the detailed activities to activate the HANARO utilization. They will be useful for expanding HANARO utilization in the near future

Promotion of HANARO utilization for year 2002

International Nuclear Information System (INIS)

Sohn, J. M.; Park, K. B.; Kim, Y. J.

2003-06-01

Object and importance to activate the HANARO utilization by expanding HANARO utilization fields, recruiting and training new users. In order to promote the HANARO utilization, the following activities have been performed. The neutron usage fee in HANARO, Achievements of HANARO utilization, Project for activation of the research using HANARO, Management of HANARO homepage, Management of HANARO related committees, Training of HANARO users, Establishment of user-room, Related activities of HANARO publicity. The related activities to activate HANARO utilization have been carried out successfully. This report summarized the detailed activities to activate the HANARO utilization. They will be useful for expanding HANARO utilization in the near future

Promotion of HANARO Utilization for Year 2006

Energy Technology Data Exchange (ETDEWEB)

Sohn, J. M.; Kim, H. R.; Jun, B. J. (and others)

2007-05-15

To activate the HANARO utilization by expanding HANARO utilization fields, recruiting and training new users. In order to promote the HANARO utilization, the following activities have been performed. The neutron usage fee in HANARO. Achievements of HANARO utilization. Project for Activation of the Research using HANARO. HANARO Symposium. Survey of the HANARO User Satisfaction Index. Operation and Management of HANARO Server. Management of HANARO related committees. Training of HANARO users. Related activities of HANARO publicity. The related activities to activate HANARO utilization have been carried out successfully. This report summarized the detailed activities to activate the HANARO utilization. They will be useful for expanding HANARO utilization in the near future.

Substantial Variability Exists in Utilities' Nuclear Decommissioning Funding Adequacy: Baseline Trends (1997-2001); and Scenario and Sensitivity Analyses (Year 2001)

International Nuclear Information System (INIS)

Williams, D. G.

2003-01-01

This paper explores the trends over 1997-2001 in my baseline simulation analysis of the sufficiency of electric utilities' funds to eventually decommission the nation's nuclear power plants. Further, for 2001, I describe the utilities' funding adequacy results obtained using scenario and sensitivity analyses, respectively. In this paper, I focus more on the wide variability observed in these adequacy measures among utilities than on the results for the ''average'' utility in the nuclear industry. Only individual utilities, not average utilities -- often used by the nuclear industry to represent its funding adequacy -- will decommission their nuclear plants. Industry-wide results tend to mask the varied results for individual utilities. This paper shows that over 1997-2001, the variability of my baseline decommissioning funding adequacy measures (in percentages) for both utility fund balances and current contributions has remained very large, reflected in the sizable ranges and frequency distributions of these percentages. The relevance of this variability for nuclear decommissioning funding adequacy is, of course, focused more on those utilities that show below ideal balances and contribution levels. Looking backward, 42 of 67 utility fund (available) balances, in 2001, were above (and 25 below) their ideal baseline levels; in 1997, 42 of 76 were above (and 34 below) ideal levels. Of these, many utility balances were far above, and many far below, such ideal levels. The problem of certain utilities continuing to show balances much below ideal persists even with increases in the adequacy of ''average'' utility balances

The Flexible Solar Utility. Preparing for Solar's Impacts to Utility Planning and Operations

Energy Technology Data Exchange (ETDEWEB)

Sterling, John [Solar Electric Power Association (SEPA), Washington, DC (United States); Davidovich, Ted [Solar Electric Power Association (SEPA), Washington, DC (United States); Cory, Karlynn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aznar, Alexandra [National Renewable Energy Lab. (NREL), Golden, CO (United States); McLaren, Joyce [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-09-01

This paper seeks to provide a flexible utility roadmap for identifying the steps that need to be taken to place the utility in the best position for addressing solar in the future. Solar growth and the emergence of new technologies will change the electric utility of tomorrow. Although not every utility, region, or market will change in the same way or magnitude, developing a path forward will be needed to reach the Electric System of the Future in the coming decades. In this report, a series of potential future states are identified that could result in drastically different energy mixes and profiles: 1) Business as Usual, 2) Low Carbon, Centralized Generation, 3) Rapid Distributed Energy Resource Growth, 4) Interactivity of Both the Grid and Demand, and 5) Grid or Load Defection. Complicating this process are a series of emerging disruptions; decisions or events that will cause the electric sector to change. Understanding and preparing for these items is critical for the transformation to any of the future states to be successful. Predicting which future state will predominate 15 years from now is not possible; however, utilities still will need to look ahead and try to anticipate how factors will impact their planning, operations, and business models. In order to dig into the potential transformations facing the utility industry, the authors conducted a series of utility interviews, held a working session at a major industry solar conference, and conducted a quantitative survey. To focus conversations, the authors leveraged the Rapid Distributed Energy Resource (DER) Growth future to draw out how utilities would have to adapt from current processes and procedures in order to manage and thrive in that new environment. Distributed solar was investigated specifically, and could serve as a proxy resource for all distributed generation (DG). It can also provide the foundation for all DERs.

Measures for carbon dioxide problem and utilization of energy

International Nuclear Information System (INIS)

Kojima, Toshinori

1992-01-01

As global environment problems, there are water, expansion of deserts, weather, tropical forests, wild animals, ocean pollution, nuclear waste contamination, acid rain, ozone layer and so on, and population, foods, energy, and resources are the problems surrounding them. It is clear that these origins are attributed to the development and consumption largely dependent on the intention of developed countries and the population problem of developing countries. In this report, the discharge of carbon dioxide that causes greenhouse effect and its relation with energy are discussed. The increase of carbon dioxide concentration, its release from fossil fuel, the destruction of forests, the balance of carbon on the earth, the development of new energy such as solar energy, the transport of new energy, secondary energy system and the role of carbon dioxide, the transfer to low carbon fuel and the carbon reduction treatment of fuel, the utilization of unused energy and energy price, the efficiency of energy utilization, the heightening of efficiency of energy conversion, energy conservation and the breakaway from energy wasteful use culture, and the recovery, preservation and use of discharged carbon dioxide are described. (K.I.)

Positive utilization of waste materials from mines and quarries

International Nuclear Information System (INIS)

Blunden, J.R.

1980-01-01

World mineral waste production together with its backlog accumulation is reviewed with particular emphasis upon the situation in North America and the UK. The common problems of conventional waste dumping in relation to its propensity to create land dereliction, are discussed before considering the positive ways of utilizing such material. Upgrading to a saleable product has not resulted in the significant utilization of currently produced waste or stockpiles, whilst processing and transport costs are unlikely in the near future to permit any reduction in on-site tipping through this mode of use. Amenity uses are related to the availability of quantities of waste. Where small amounts are concerned opportunities exist for the backfilling of old excavations, rolling restoration and the construction of amenity backs; the technical and economic problems of each of these is considered. Large scale waste production cannot be similarly contained. Thus the problems of backfilling old workings and long distance transport for reclamation or public works schemes are examined in relation to cost factors. The limitations of conventional economics in dealing with the environmental problems posed by waste are stressed and the possible supportive role of governments in this respect is examined

Primary health care utilization by immigrants as compared to the native population: a multilevel analysis of a large clinical database in Catalonia.

Science.gov (United States)

Muñoz, Miguel-Angel; Pastor, Esther; Pujol, Joan; Del Val, José Luis; Cordomí, Silvia; Hermosilla, Eduardo

2012-06-01

Immigration is a relevant public health issue and there is a great deal of controversy surrounding its impact on health services utilization. To determine differences between immigrants and non-immigrants in the utilization of primary health care services in Catalonia, Spain. Population based, cross-sectional, multicentre study. We used the information from 16 primary health care centres in an area near Barcelona, Spain. We conducted a multilevel analysis for the year 2008 to compare primary health care services utilization between all immigrants aged 15 or more and a sample of non-immigrants, paired by age and sex. Overall, immigrants living in Spain used health services more than non-immigrants (Incidence Risk Ratio (IRR) 1.16 (95% Confidence Interval (CI): 1.15-1.16) and (IRR 1, 26, 95% CI: 1.25-1.28) for consultations with GPs and referrals to specialized care, respectively. People coming from the Maghreb and the rest of Africa requested the most consultations involving a GP and nurses (IRR 1.34, 95% CI: 1.33-1.36 and IRR 1.06, 95% CI: 1.03-1.44, respectively). They were more frequently referred to specialized care (IRR 1.44, 95% CI: 1.41-1.46) when compared to Spaniards. Immigrants from Asia had the lowest numbers of consultations with a GP and referrals (IRR 0.76, 95% CI: 0.66-0.88 and IRR 0.76, 95% CI: 0.61-0.95, respectively. On average, immigrants living in Catalonia used the health services more than non-immigrants. Immigrants from the Maghreb and other African countries showed the highest and those from Asia the lowest, number of consultations and referrals to specialized care.

Solar energy utilization by physical methods.

Science.gov (United States)

Wolf, M

1974-04-19

On the basis of the estimated contributions of these differing methods of the utilization of solar energy, their total energy delivery impact on the projected U.S. energy economy (9) can be evaluated (Fig. 5). Despite this late energy impact, the actual sales of solar energy utilization equipment will be significant at an early date. Potential sales in photovoltaic arrays alone could exceed $400 million by 1980, in order to meet the projected capacity buildup (10). Ultimately, the total energy utilization equipment industry should attain an annual sales volume of several tens of billion dollars in the United States, comparable to that of several other energy related industries. Varying amounts of technology development are required to assure the technical and economic feasibility of the different solar energy utilization methods. Several of these developments are far enough along that the paths can be analyzed from the present time to the time of demonstration of technical and economic feasibility, and from there to production and marketing readiness. After that point, a period of market introduction will follow, which will differ in duration according to the type of market addressed. It may be noted that the present rush to find relief from the current energy problem, or to be an early leader in entering a new market, can entail shortcuts in sound engineering practice, particularly in the areas of design for durability and easy maintenance, or of proper application engineering. The result can be loss of customer acceptance, as has been experienced in the past with various products, including solar water heaters. Since this could cause considerable delay in achieving the expected total energy impact, it will be important to spend adequate time at this stage for thorough development. Two other aspects are worth mentioning. The first is concerned with the economic impacts. Upon reflection on this point, one will observe that largescale solar energy utilization will

Mercury Oxidation via Catalytic Barrier Filters Phase II

Energy Technology Data Exchange (ETDEWEB)

Wayne Seames; Michael Mann; Darrin Muggli; Jason Hrdlicka; Carol Horabik

2007-09-30

In 2004, the Department of Energy National Energy Technology Laboratory awarded the University of North Dakota a Phase II University Coal Research grant to explore the feasibility of using barrier filters coated with a catalyst to oxidize elemental mercury in coal combustion flue gas streams. Oxidized mercury is substantially easier to remove than elemental mercury. If successful, this technique has the potential to substantially reduce mercury control costs for those installations that already utilize baghouse barrier filters for particulate removal. Completed in 2004, Phase I of this project successfully met its objectives of screening and assessing the possible feasibility of using catalyst coated barrier filters for the oxidation of vapor phase elemental mercury in coal combustion generated flue gas streams. Completed in September 2007, Phase II of this project successfully met its three objectives. First, an effective coating method for a catalytic barrier filter was found. Second, the effects of a simulated flue gas on the catalysts in a bench-scale reactor were determined. Finally, the performance of the best catalyst was assessed using real flue gas generated by a 19 kW research combustor firing each of three separate coal types.

A divide-and-conquer algorithm for large-scale de novo transcriptome assembly through combining small assemblies from existing algorithms.

Science.gov (United States)

Sze, Sing-Hoi; Parrott, Jonathan J; Tarone, Aaron M

2017-12-06

While the continued development of high-throughput sequencing has facilitated studies of entire transcriptomes in non-model organisms, the incorporation of an increasing amount of RNA-Seq libraries has made de novo transcriptome assembly difficult. Although algorithms that can assemble a large amount of RNA-Seq data are available, they are generally very memory-intensive and can only be used to construct small assemblies. We develop a divide-and-conquer strategy that allows these algorithms to be utilized, by subdividing a large RNA-Seq data set into small libraries. Each individual library is assembled independently by an existing algorithm, and a merging algorithm is developed to combine these assemblies by picking a subset of high quality transcripts to form a large transcriptome. When compared to existing algorithms that return a single assembly directly, this strategy achieves comparable or increased accuracy as memory-efficient algorithms that can be used to process a large amount of RNA-Seq data, and comparable or decreased accuracy as memory-intensive algorithms that can only be used to construct small assemblies. Our divide-and-conquer strategy allows memory-intensive de novo transcriptome assembly algorithms to be utilized to construct large assemblies.

The laboratory test utilization management toolbox.

Science.gov (United States)

Baird, Geoffrey

2014-01-01

Efficiently managing laboratory test utilization requires both ensuring adequate utilization of needed tests in some patients and discouraging superfluous tests in other patients. After the difficult clinical decision is made to define the patients that do and do not need a test, a wealth of interventions are available to the clinician and laboratorian to help guide appropriate utilization. These interventions are collectively referred to here as the utilization management toolbox. Experience has shown that some tools in the toolbox are weak and other are strong, and that tools are most effective when many are used simultaneously. While the outcomes of utilization management studies are not always as concrete as may be desired, what data is available in the literature indicate that strong utilization management interventions are safe and effective measures to improve patient health and reduce waste in an era of increasing financial pressure.

Mox fuel utilization in ATR

OpenAIRE

下村 和生; 川太 徳夫

1987-01-01

ATR, a heavy-water moderated boiling-light-water cooled reactor developed in Japan, is a unique reactor with out-standing flexibility regarding nuclear fuel utilization, because it has superior properties concerning the utilization of plutonium, recovered uranium and depleted uranium. The development of this type of reactor is expected to contribute both to the stable supply of energy and to the establishment of plutonium utilization in Japan. Much effort has been and will be made on the deve...

Promotion of HANARO Utilization for Year 2005

International Nuclear Information System (INIS)

Sohn, J. M.; Kim, Y. J.; Kim, H. R.

2006-06-01

Object and Importance To activate the HANARO utilization by expanding HANARO utilization fields, recruiting and training new users. Scope and Contents In order to promote the HANARO utilization, the following activities have been performed. The neutron usage fee in HANARO, Achievements of HANARO utilization, Project for Activation of the Research using HANARO, HANARO Symposium, Survey of the HANARO User Satisfaction Index, Operation and Management of HANARO Server, Management of HANARO related committees, Training of HANARO users and Related activities of HANARO publicity. The related activities to activate HANARO utilization have been carried out successfully. This report summarized the detailed activities to activate the HANARO utilization. They will be useful for expanding HANARO utilization in the near future

Utilization of alimentary protein and amino acids in satisfying the nitrogen requirements of monogastric mammals

International Nuclear Information System (INIS)

Pion, R.; Arnal, M.

1976-01-01

The nitrogenous matter in the food of monogastric animals consists mainly of proteins, which are rapidly hydrolized in the intestinal tract when they have left the gastric reservoir. The digestive tube has several roles: it provides for hydrolysis of the food proteins and for a supply of endogenous nitrogen; it enables a certain digestive function to be performed by the intestinal flora and permits the transport of amino acids into the blood, selecting those which are needed for protein synthesis. The digestion products appear mainly in the form of free amino acids in the portal blood. A large proportion of these amino acids is taken up by the liver, so that intense protein synthesis takes place in the latter, coupled with a decrease in catabolism leading to a rhythmic increase in the liver content of proteins and RNA. The labile proteins retained are mainly enzymes, which catabolize the amino acids, and the liver is the site of the catabolism of most of the excess amino acids except those with chain branching. Alimentary deficiencies do not markedly reduce protein synthesis in this organ, since the rate of re-utilization of the amino acids is increased and the liver thus plays a regulatory role. The utilization of amino acids in muscle also follows a certain rhythm, partly connected with feeding, and under hormonal control. The muscle is the seat of catabolism of a large part of the branched chain amino acids, and like the liver it contributes to the energy utilization of amino acids. The rate of utilization of certain essential amino acids can be measured by metabolic criteria, including determination of blood and muscle concentrations and excretion of 14 CO 2 labels in the exhaled air or of 35 S labels in urine. (author)

Technology of CCS coal utilization (outline of large-size demonstration test for CCS); CCS tan riyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

Konno, K [Center for Coal Utilization, Japan, Tokyo (Japan); Hironaka, H [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

1996-09-01

The coal cartridge system (CCS) is a series of the total system, in which coal is processed centrally at a supply base for each unit of consumer areas, supplied as pulverized coal in bulk units, and coal ash after combustion is recovered and treated. The system is expected of advantages resulted from the centralized production, elimination of handling troubles, and cleanliness. Following a small scale demonstration test, a large demonstration test for practically usable scale has begun in 1990, and completed in fiscal 1995. This paper introduces the CCS and reports the result of the test. In the large demonstration test, a supply station (with manufacturing capability of 200,000 tons a year) was installed in the Aichi refinery of Idemitsu Kosan Co., Ltd., and systematization on quality design and system technologies has been carried out. Long-term continuous operation for five years was achieved (operation time of the supply facilities was about 19,000 hours) without a failure and accident, to which every elemental technology was evaluated highly, and convenience and reliability of the system was verified. 13 figs., 3 tabs.

Managing change in nuclear utilities

International Nuclear Information System (INIS)

2001-07-01

The nuclear power industry has undergone change since inception, but never so much as now. The rewards for proactively changing in anticipation of emerging demands are great, but the cost of failure is also great. Today nuclear plants are being shut down by socio-political and economic processes. The survival of the technology as a clean energy source for the future depends on the demonstration of long term safety to the public, protection of the environment, and economic superiority to competing energy sources. The overriding influence on these factors is strong management of the business with effective regulation. In particular it is necessary for both utility and regulator to believe that enhancing safety is part of being successful. This publication has been developed for all levels of management who are developing and implementing changes within their areas of responsibility. The safety conscious, continuous improvement, management culture, which has proven successful in today's nuclear business, has taken time to develop. Many utilities have difficulty sustaining this culture during the transitions that are intrinsic to change. Properly managed however, changes can enhance nuclear safety, plant reliability and cost competitiveness, from the design stage to decommissioning. Change has no respect for timing and regardless of the level of experience managers may have in its management, large scale change is confronting every nuclear utility world wide. These take the form of government policy changes, open market demands, privatization with the demand for increased shareholder returns, regulatory and social pressures, and economic and political transition. The danger from such issues for the nuclear company executive and the regulator is that they are powerful distractions, particularly for those executives who are not experienced in the unique managerial requirements of the nuclear business. This report gathers the experience of Member States into an array of

Managing change in nuclear utilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The nuclear power industry has undergone change since inception, but never so much as now. The rewards for proactively changing in anticipation of emerging demands are great, but the cost of failure is also great. Today nuclear plants are being shut down by socio-political and economic processes. The survival of the technology as a clean energy source for the future depends on the demonstration of long term safety to the public, protection of the environment, and economic superiority to competing energy sources. The overriding influence on these factors is strong management of the business with effective regulation. In particular it is necessary for both utility and regulator to believe that enhancing safety is part of being successful. This publication has been developed for all levels of management who are developing and implementing changes within their areas of responsibility. The safety conscious, continuous improvement, management culture, which has proven successful in today's nuclear business, has taken time to develop. Many utilities have difficulty sustaining this culture during the transitions that are intrinsic to change. Properly managed however, changes can enhance nuclear safety, plant reliability and cost competitiveness, from the design stage to decommissioning. Change has no respect for timing and regardless of the level of experience managers may have in its management, large scale change is confronting every nuclear utility world wide. These take the form of government policy changes, open market demands, privatization with the demand for increased shareholder returns, regulatory and social pressures, and economic and political transition. The danger from such issues for the nuclear company executive and the regulator is that they are powerful distractions, particularly for those executives who are not experienced in the unique managerial requirements of the nuclear business. This report gathers the experience of Member States into an array of

Measuring the potential utility of seasonal climate predictions

Science.gov (United States)

Tippett, Michael K.; Kleeman, Richard; Tang, Youmin

2004-11-01

Variation of sea surface temperature (SST) on seasonal-to-interannual time-scales leads to changes in seasonal weather statistics and seasonal climate anomalies. Relative entropy, an information theory measure of utility, is used to quantify the impact of SST variations on seasonal precipitation compared to natural variability. An ensemble of general circulation model (GCM) simulations is used to estimate this quantity in three regions where tropical SST has a large impact on precipitation: South Florida, the Nordeste of Brazil and Kenya. We find the yearly variation of relative entropy is strongly correlated with shifts in ensemble mean precipitation and weakly correlated with ensemble variance. Relative entropy is also found to be related to measures of the ability of the GCM to reproduce observations.

Harmonic Mitigation Methods in Large Offshore Wind Power Plants

DEFF Research Database (Denmark)