Magnetocaloric properties of the hexagonal HoMnO{sub 3} single crystal revisited

Energy Technology Data Exchange (ETDEWEB)

Balli, M., E-mail: Mohamed.balli@Usherbrooke.ca [Regroupement québécois sur les matériaux de pointe, Département de physique, Université de Sherbrooke, QC, Canada J1K 2R1 (Canada); Roberge, B.; Vermette, J.; Jandl, S. [Regroupement québécois sur les matériaux de pointe, Département de physique, Université de Sherbrooke, QC, Canada J1K 2R1 (Canada); Fournier, P. [Regroupement québécois sur les matériaux de pointe, Département de physique, Université de Sherbrooke, QC, Canada J1K 2R1 (Canada); Canadian Institute for Advanced Research, Toronto, Ontario, Canada M5G 1Z8 (Canada); Gospodinov, M.M. [Institute of Solid State Physics, Bulgarian Academy of Science, Sofia 1184 (Bulgaria)

2015-12-01

Magnetic and magnetocaloric properties of the hexagonal HoMnO{sub 3} single crystal have been revisited. It was found that the magnetocaloric effect shown by HoMnO{sub 3} strongly depends on the crystal orientation in respect to the applied magnetic field. Consequently, a large thermal effect can be induced by spinning the single crystal HoMnO{sub 3} around the a (or b) axis in a constant magnetic field instead of the conventional magnetization–demagnetization process. Under 7 T, the maximum rotating entropy change was evaluated to be about 8 J/kg K. The associated adiabatic temperature change reaches a value of about 5 K. These values are comparable to those of the other oxides exhibiting a large rotating magnetocaloric effect. The presence of both conventional and rotating thermal effects makes the hexagonal HoMnO{sub 3} more interesting from a practical point of view.

Giant magnetocaloric effect from reverse martensitic transformation in Ni–Mn–Ga–Cu ferromagnetic shape memory alloys

International Nuclear Information System (INIS)

Sarkar, Sudip Kumar; Sarita; Babu, P.D.; Biswas, Aniruddha; Siruguri, Vasudeva; Krishnan, Madangopal

2016-01-01

In an effort to produce Giant Magnetocaloric effect (GMCE) near room temperature, in a first ever such study, the austenite transformation temperature (A_s) was fine tuned to ferromagnetic Curie temperature (T_C) in Ferromagnetic Shape Memory Alloys (FSMA) and a large GMCE of ΔSM = −81.8 J/Kg-K was achieved in Ni_5_0Mn_1_8_._5Cu_6_._5Ga_2_5 alloy during reverse martensitic transformation (heating cycle) for a magnetic field change of 9 T at 303 K. Fine tuning of A_s with T_C was achieved by Cu substitution in Ni_5_0Mn_2_5_−_xCu_xGa_2_5 (0 ≤ x ≤ 7.0)-based FSMAs. Characterizations of these alloys were carried out using Optical and Scanning Electron Microscopy, X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC) and DC magnetization measurements. Addition of Cu to stoichiometric Heusler type Ni_2MnGa increases the martensitic transformation temperatures and decreases T_C. Concurrently, ΔSM increases with Cu addition and peaks at 6.5 at% Cu for which there is a virtual overlap between T_C and A_s. Maximum Refrigerant Capacity (RCP) of 327.0 J/Kg was also achieved in the heating cycle for 9 T field change at 303 K. Corresponding values for the cooling cycle measurements (measured during forward transformation) were 30.4 J/Kg-K and 123.5 J/Kg respectively for the same 6.5 at% Cu sample under the same thermo-magnetic conditions. - Highlights: • A_s was fine tuned to T_C in Cu substituted Ni_5_0Mn_2_5_−_xCu_xGa_2_5 (0 ≤ x ≤ 7.0) alloys. • MT temperature increases with Cu addition while T_C decreases. • A virtual overlapping of A_s with T_C was found in Ni_5_0Mn_1_8_._5Cu_6_._5Ga_2_5 alloys. • ΔSM = −81.8 J/Kg-K achieved from reverse MT for Δ(μ_0H) = 9 T at 303 K. • A highest RCP value of 94.6 J/Kg was observed for Δ(μ_0H) = 5 T in Cu:6.5 alloys.

Magnetocaloric effect in Heusler shape-memory alloys

International Nuclear Information System (INIS)

Planes, A.; Manosa, Ll.; Moya, X.; Krenke, T.; Acet, M.; Wassermann, E.F.

2007-01-01

We present a comparative study of the magnetocaloric properties of Ni-Mn-X Heusler shape-memory alloys with X=Ga, Sn and In. In these materials, the magnetocaloric effect is a consequence of the magnetostructural coupling that enables the magnetic shape-memory properties. We show that inverse magnetocaloric effects can occur in these materials. The origin of this anomalous behavior is different in stoichiometric Ni 2 MnGa and in Ni-Mn-Sn/In. In the former case it is related to the strong uniaxial magnetic anisotropy of the martensitic phase, while in the later it is an intrinsic effect associated with an incipient antiferromagnetism

Magnetocaloric effects in RTX intermetallic compounds (R = Gd–Tm, T = Fe–Cu and Pd, X = Al and Si)

International Nuclear Information System (INIS)

Zhang Hu; Shen Bao-Gen

2015-01-01

The magnetocaloric effect (MCE) of RTSi and RT Al systems with R = Gd–Tm, T = Fe–Cu and Pd, which have been widely investigated in recent years, is reviewed. It is found that these RTX compounds exhibit various crystal structures and magnetic properties, which then result in different MCE. Large MCE has been observed not only in the typical ferromagnetic materials but also in the antiferromagnetic materials. The magnetic properties have been studied in detail to discuss the physical mechanism of large MCE in RTX compounds. Particularly, some RTX compounds such as ErFeSi, HoCuSi, HoCuAl exhibit large reversible MCE under low magnetic field change, which suggests that these compounds could be promising materials for magnetic refrigeration in a low temperature range. (topical review)

Investigation on the magnetocaloric effect in TbN compound

Energy Technology Data Exchange (ETDEWEB)

Ranke, P.J. von, E-mail: von.ranke@uol.com.br [Instituto de Física, Universidade do Estado do Rio de Janeiro—UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil); Alvarenga, T.S.T.; Nóbrega, E.P.; Alho, B.P.; Ribeiro, P.O. [Instituto de Física, Universidade do Estado do Rio de Janeiro—UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil); Carvalho, A. Magnus G. [Divisão de Metrologia de Materiais (DIMAT), Instituto Nacional de Metrologia, Normalização e Qualidade Industrial (INMETRO), Duque de Caxias, RJ 25250-020 (Brazil); Sousa, V.S.R. de; Caldas, A.; Oliveira, N.A. de [Instituto de Física, Universidade do Estado do Rio de Janeiro—UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil)

2013-09-15

One of the biggest challenges in materials science is to understand the microscopic mechanisms responsible in storage and release material entropy. TbN compound, which presents non-degeneracy in ground state, was studied and the calculated magnetocaloric effect is in good agreement with the recent experimental data. Also inverse magnetocaloric effect and spin reorientation transition were predicted in TbN. The theoretical investigations were carried out using a Hamiltonian, which includes the crystalline electrical field, Zeeman and exchange interactions. - Highlights: • Theoretical description of the magnetocaloric effect in TbN. • Influence of the crystalline electrical field anisotropy on TbN. • Predictions of inverse and anomalous magnetocaloric effect in TbN.

Magnetocaloric refrigeration concepts: current state of the art

DEFF Research Database (Denmark)

Nielsen, Kaspar Kirstein

2014-01-01

Refrigeration devices based on the magnetocaloric effect have been prototyped in great numbers during the past decade. The search for the optimal combination of magnetic field source, regenerator geometry, magnetocaloric material composition and flow system design has resulted in a variety...

Magnetism and large magnetocaloric effect in HoFe{sub 2-x}Al{sub x}

Energy Technology Data Exchange (ETDEWEB)

Mican, S., E-mail: sever.mican@ubbcluj.ro [Babes-Bolyai University Cluj-Napoca, RO-400084 Cluj-Napoca (Romania); Benea, D., E-mail: diana.benea@phys.ubbcluj.ro [Babes-Bolyai University Cluj-Napoca, RO-400084 Cluj-Napoca (Romania); Tetean, R., E-mail: romulus.tetean@phys.ubbcluj.ro [Babes-Bolyai University Cluj-Napoca, RO-400084 Cluj-Napoca (Romania)

2013-02-05

Highlights: Black-Right-Pointing-Pointer Structural, magnetic and magnetocaloric properties of HoFe{sub 2-x}Al{sub x} compounds are reported. Black-Right-Pointing-Pointer Electronic structure calculations show a good agreement between theory and experiment. Black-Right-Pointing-Pointer Magnetic transitions close to room temperature for the Fe-rich samples. Black-Right-Pointing-Pointer High values of the relative cooling power for all of the investigated samples. Black-Right-Pointing-Pointer No hysteresis losses in applied fields of up to 4 T. - Abstract: The structural, magnetic and magnetocaloric properties of several HoFe{sub 2-x}Al{sub x} compounds were investigated. The compounds in the Fe-rich region (0.36 Less-Than-Or-Slanted-Equal-To x Less-Than-Or-Slanted-Equal-To 0.4) crystallize in the cubic MgCu{sub 2} (C15) structure, while for the ones in the intermediate region (0.75 Less-Than-Or-Slanted-Equal-To x Less-Than-Or-Slanted-Equal-To 1.125) the hexagonal MgZn{sub 2} (C14) structure was observed. Electronic structure calculations were performed, showing a good agreement between theory and experiment. The Curie temperatures were found to decrease with Al content. For the Fe-rich compounds, these are close to room temperature, while for the compounds in the intermediate region, transition temperatures are well below 300 K. No magnetic hysteresis was found around the Curie temperature for applied magnetic fields of up to 4 T. All of the investigated compounds undergo a second-order magnetic phase transition at the Curie temperature. A maximum magnetic entropy change value of 7.6 J/kg K was obtained for the sample with x = 1.125, all of the samples displaying rather large RCP values. The possibility of incorporating these materials in magnetic refrigeration devices is discussed.

Near room temperature magnetocaloric properties and the universal curve of MnCoGe1-xCux

Science.gov (United States)

Si, Xiaodong; Liu, Yongsheng; Lu, Xiaofei; Shen, Yulong; Wang, Wenli; Yu, Wenying; Zhou, Tao; Gao, Tian

2017-05-01

Intermetallic compounds based on MnCoGe have drawn attention due to the coupled magnetic and structural transformations and the large magnetocaloric entropy. Here, we provide a systematic comparison of experimental data under different magnetic fields with magnetic and the magnetocaloric properties. The ferromagnetic transition temperature (TC) increases from 353.4(6) K for x = 0.01 to 363.4(4) K for x = 0.04 with increasing nominal copper content. The maximum magnetic entropy change |ΔSM| in a magnetic field change of 5 T is found to be 18.3(2) J/(kg K) with a large relative cooling power (RCP) value of 292.5(4) J/kg for x = 0.01, revealing that the present system can provide an acceptable magnetocaloric effect at a cheaper price for magnetic refrigeration materials. Making attempt to contrast a master curve for the present system, we find the experimental values of magnetic field dependence of the magnetic entropy change are consistent with a phenomenological universal curve.

Giant magnetocaloric effect from reverse martensitic transformation in Ni–Mn–Ga–Cu ferromagnetic shape memory alloys

Energy Technology Data Exchange (ETDEWEB)

Sarkar, Sudip Kumar, E-mail: sudips@barc.gov.in [Glass and Advanced Materials Division, Bhabha Atomic Research Centre, Mumbai, 400085 (India); Sarita [Glass and Advanced Materials Division, Bhabha Atomic Research Centre, Mumbai, 400085 (India); Babu, P.D. [UGC-DAE Consortium for Scientific Research, Mumbai Centre, BARC, Mumbai, 400085 (India); Biswas, Aniruddha [Glass and Advanced Materials Division, Bhabha Atomic Research Centre, Mumbai, 400085 (India); Siruguri, Vasudeva [UGC-DAE Consortium for Scientific Research, Mumbai Centre, BARC, Mumbai, 400085 (India); Krishnan, Madangopal [Glass and Advanced Materials Division, Bhabha Atomic Research Centre, Mumbai, 400085 (India)

2016-06-15

In an effort to produce Giant Magnetocaloric effect (GMCE) near room temperature, in a first ever such study, the austenite transformation temperature (A{sub s}) was fine tuned to ferromagnetic Curie temperature (T{sub C}) in Ferromagnetic Shape Memory Alloys (FSMA) and a large GMCE of ΔSM = −81.8 J/Kg-K was achieved in Ni{sub 50}Mn{sub 18.5}Cu{sub 6.5}Ga{sub 25} alloy during reverse martensitic transformation (heating cycle) for a magnetic field change of 9 T at 303 K. Fine tuning of A{sub s} with T{sub C} was achieved by Cu substitution in Ni{sub 50}Mn{sub 25−x}Cu{sub x}Ga{sub 25} (0 ≤ x ≤ 7.0)-based FSMAs. Characterizations of these alloys were carried out using Optical and Scanning Electron Microscopy, X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC) and DC magnetization measurements. Addition of Cu to stoichiometric Heusler type Ni{sub 2}MnGa increases the martensitic transformation temperatures and decreases T{sub C}. Concurrently, ΔSM increases with Cu addition and peaks at 6.5 at% Cu for which there is a virtual overlap between T{sub C} and A{sub s}. Maximum Refrigerant Capacity (RCP) of 327.0 J/Kg was also achieved in the heating cycle for 9 T field change at 303 K. Corresponding values for the cooling cycle measurements (measured during forward transformation) were 30.4 J/Kg-K and 123.5 J/Kg respectively for the same 6.5 at% Cu sample under the same thermo-magnetic conditions. - Highlights: • A{sub s} was fine tuned to T{sub C} in Cu substituted Ni{sub 50}Mn{sub 25−x}Cu{sub x}Ga{sub 25} (0 ≤ x ≤ 7.0) alloys. • MT temperature increases with Cu addition while T{sub C} decreases. • A virtual overlapping of A{sub s} with T{sub C} was found in Ni{sub 50}Mn{sub 18.5}Cu{sub 6.5}Ga{sub 25} alloys. • ΔSM = −81.8 J/Kg-K achieved from reverse MT for Δ(μ{sub 0}H) = 9 T at 303 K. • A highest RCP value of 94.6 J/Kg was observed for Δ(μ{sub 0}H) = 5 T in Cu:6.5 alloys.

Constraints on the Adiabatic Temperature Change in Magnetocaloric Materials

DEFF Research Database (Denmark)

Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden; Smith, Anders

2010-01-01

The thermodynamics of the magnetocaloric effect implies constraints on the allowed variation in the adiabatic temperature change for a magnetocaloric material. An inequality for the derivative of the adiabatic temperature change with respect to temperature is derived for both first- and second...

Materials Challenges for High Performance Magnetocaloric Refrigeration Devices

DEFF Research Database (Denmark)

Smith, Anders; Bahl, Christian; Bjørk, Rasmus

2012-01-01

Magnetocaloric materials with a Curie temperature near room temperature have attracted signifi cant interest for some time due to their possible application for high-effi ciency refrigeration devices. This review focuses on a number of key issues of relevance for the characterization, performance....... The question of how to evaluate the suitability of a given material for use in a magnetocaloric device is covered in some detail, including a critical assessment of a number of common performance metrics. Of particular interest is which non-magnetocaloric properties need to be considered in this connection....... An overview of several important materials classes is given before considering the performance of materials in actual devices. Finally, an outlook on further developments is presented....

Magnetic phase transitions and large magnetic entropy change with a wide temperature span in HoZn

Energy Technology Data Exchange (ETDEWEB)

Li, Lingwei, E-mail: wei0396@hotmail.com [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China); Institut für Anorganische und Analytische Chemie, Universität Münster, Corrensstrasse 30, D-48149 Münster (Germany); Yuan, Ye [Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Institute of Ion Beam Physics and Materials Research, P.O. Box 510119, 01314 Dresden (Germany); Zhang, Yikun [Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819 (China); Pöttgen, Rainer [Institut für Anorganische und Analytische Chemie, Universität Münster, Corrensstrasse 30, D-48149 Münster (Germany); Zhou, Shengqiang [Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Institute of Ion Beam Physics and Materials Research, P.O. Box 510119, 01314 Dresden (Germany)

2015-09-15

Highlights: • Magnetic phase transitions and magnetocaloric effect in HoZn were studied. • The critical properties of HoZn were systematically investigated. • The obtained critical exponents are satisfied with scaling theory. • A large reversible magnetocaloric effect in HoZn was observed. • HoZn could be a promising candidate for magnetic refrigeration. - Abstract: CsCl-type HoZn undergoes two successive magnetic phase transitions: (i) paramagnetic to ferromagnetic (FM) at T{sub C} ∼ 72 K and (ii) a spin reorientation (SR) at T{sub SR} ∼ 26 K. Magnetization and modified Arrott plots indicate that HoZn undergoes a second-order magnetic phase transition around T{sub C}. The obtained critical exponents have some small deviations from the mean-field theory, indicating a short range or a local magnetic interaction which is properly related to the coexistence of FM and SR transitions at low temperature. Two successive magnetic transitions in HoZn induce one broad pronounced peak together with a shoulder in the temperature dependence of the magnetic entropy change −ΔS{sub M}(T) curves, resulting in a wide temperature range with a large relative cooling power (RCP). For a field change of 0–7 T, the maximum value of −ΔS{sub M} is 15.2 J/kg K around T{sub C} with a large RCP value of 1124 J/kg. The large reversible magnetocaloric effect (MCE) and RC indicate that HoZn is a good candidate for active magnetic refrigeration.

Design, fabrication and thermal characterization of a magnetocaloric microcooler

Energy Technology Data Exchange (ETDEWEB)

Kim, S.; Ghirlanda, S.; Adams, C.; Bethala, B.; Sambandam, S.N.; Bhansali, S. [BioMEMS and Microsystems Laboratory, Department of Electrical Engineering, University of South Florida, 4202 E. Fowler Ave., ENB118, Tampa, FL 33620, (United States)

2006-12-11

Magnetocaloric cooling is an alternative, high-efficiency cooling technology. In this paper, we present the design and fabrication of a micromachined magnetocaloric cooler and demonstrate its ability to work in a small magnetic field (<1.2 T) with a cooling test. The cooler was built by fabricating Si microfluidic channels, and it was integrated with a Gd{sub 5}(Si{sub 2}Ge{sub 2}) magnetocaloric refrigeration element. The magnetic properties of the Gd{sub 5}(Si{sub 2}Ge{sub 2}) material were characterized to calculate the magnetic entropy change at different ambient temperatures. Three different methods to integrate the channel layer and the magnetocaloric element were evaluated to test sealing and cooling performance. The cooling tests were performed by providing a magnetic field using an electromagnet. A test jig was constructed between the poles of an electromagnet to maintain a steady temperature during the test. Cooling tests were performed on the magnetocaloric element at ambient temperatures ranging from 258 to 280 K using a magnetic field of 1.2 T. Experimental results showed a maximum temperature change of 7 K on the magnetocaloric element alone at an ambient temperature of 258 K. Cooling tests of the fully integrated coolers were also performed. A solution of anti-freeze fluid (propylene glycol) and water was used as the coolant. The temperature of the working fluid decreased by 4.6 and 9 K for the glass and Si intermediate layers, respectively, confirming that the thermal conductivity of the materials is also an important factor in cooler performance. (Author)

Magnetocaloric effect in (La1-xAx)2/3Ba1/3Mn1.05O3-δ

DEFF Research Database (Denmark)

Ancona-Torres, Carlos Eugenio; Menon, Mohan; Bahl, Christian Robert Haffenden

Recently, a large magnetocaloric effect has been reported in La2/3Ba1/3MnO3-δ at about 300 K. In this paper, we investigate the effect of the ion size distribution at the A site on the magnetocaloric effect of this perovskite material. This is accomplished by replacing the lanthanum by Ce, Pr......, and Nd, which allows us to study the effect of both the average size, , and the distribution, σrA, on the magnetic properties of the system. Using magnetization and heat capacity measurements, we determine the important magnetocaloric parameters ΔSM and ΔTad of (La1-xAx)2/3Ba1/3Mn1.05O3-δ powders...

Colossal magnetocaloric effect in magneto-auxetic systems

Science.gov (United States)

Dudek, M. R.; Wojciechowski, K. W.; Grima, J. N.; Caruana-Gauci, R.; Dudek, K. K.

2015-08-01

We show that a mechanically driven magnetocaloric effect (MCE) in magneto-auxetic systems (MASs) in the vicinity of room temperature is possible and the effect can be colossal. Even at zero external magnetic field, the magnetic entropy change in this reversible process can be a few times larger in magnitude than in the case of the giant MCE discovered by Pecharsky and Gschneidner in Gd5(Si2Ge2). MAS represent a novel class of metamaterials having magnetic insertions embedded within a non-magnetic matrix which exhibits a negative Poisson’s ratio. The auxetic behaviour of the non-magnetic matrix may either enhance the magnetic ordering process or it may result in a transition to the disordered phase. In the MAS under consideration, a spin 1/2 system is chosen for the magnetic component and the well-known Onsager solution for the two-dimensional square lattice Ising model at zero external magnetic field is used to show that the isothermal change in magnetic entropy accompanying the auxetic behaviour can take a large value at room temperature. The practical importance of our findings is that MCE materials used in present engineering applications may be further enhanced by changing their geometry such that they exhibit auxetic behaviour.

Colossal magnetocaloric effect in magneto-auxetic systems

International Nuclear Information System (INIS)

Dudek, M R; Dudek, K K; Wojciechowski, K W; Grima, J N; Caruana-Gauci, R

2015-01-01

We show that a mechanically driven magnetocaloric effect (MCE) in magneto-auxetic systems (MASs) in the vicinity of room temperature is possible and the effect can be colossal. Even at zero external magnetic field, the magnetic entropy change in this reversible process can be a few times larger in magnitude than in the case of the giant MCE discovered by Pecharsky and Gschneidner in Gd 5 (Si 2 Ge 2 ). MAS represent a novel class of metamaterials having magnetic insertions embedded within a non-magnetic matrix which exhibits a negative Poisson’s ratio. The auxetic behaviour of the non-magnetic matrix may either enhance the magnetic ordering process or it may result in a transition to the disordered phase. In the MAS under consideration, a spin 1/2 system is chosen for the magnetic component and the well-known Onsager solution for the two-dimensional square lattice Ising model at zero external magnetic field is used to show that the isothermal change in magnetic entropy accompanying the auxetic behaviour can take a large value at room temperature. The practical importance of our findings is that MCE materials used in present engineering applications may be further enhanced by changing their geometry such that they exhibit auxetic behaviour. (paper)

Magnetocaloric materials and first order phase transitions

DEFF Research Database (Denmark)

Neves Bez, Henrique

and magnetocaloric regenerative tests. The magnetic, thermal and structural properties obtained from such measurements are then evaluated through different models, i.e. the Curie-Weiss law, the Bean-Rodbell model, the free electron model and the Debye model.The measured magnetocaloric properties of La0.67Ca0.33MnO3...... heat capacity, magnetization and entropy change measurements. By measuring bulky particles (with a particle size in the range of 5001000 μm) of La(Fe,Mn,Si)13Hz with first order phase transition, it was possible to observe very sharp transitions. This is not the case for finer ground particles which......This thesis studies the first order phase transitions of the magnetocaloric materials La0.67Ca0.33MnO3 and La(Fe,Mn,Si)13Hz trying to overcome challenges that these materials face when applied in active magnetic regenerators. The study is done through experimental characterization and modelling...

Performance-oriented Analysis of a Hybrid magnetic Assembly for a Heat-pump Magnetocaloric Device

DEFF Research Database (Denmark)

Insinga, Andrea Roberto; Smith, Anders; Bahl, Christian R.H.

2014-01-01

Conventional active-regenerator magnetocaloric devices include moving parts, with the purpose of generating an oscillating magnetic field in the magneto-caloric material, placed inside the regenerator. In this work a different design is analyzed, for application in a magnetocaloric heat pump...

Very large refrigerant capacity at room temperature with reproducible magnetocaloric effect in Fe0.975Ni0.025Rh

International Nuclear Information System (INIS)

Manekar, Meghmalhar; Roy, S B

2011-01-01

We present the results of magnetocaloric effect (MCE) measurements on Fe 0.975 Ni 0.025 Rh. The MCE is estimated using both the isothermal field-dependent magnetization and the temperature-dependent magnetization in constant magnetic fields. We find a very large effective refrigerant capacity of nearly 492.8 J kg -1 , with the hot end at about 307 K, which is reproducible over many field cycles. We compare this refrigerant capacity with those of two well known systems, namely Gd 5 Ge 1.9 Si 2 Fe 0.1 and MnFeP 0.45 As 0.55 , which show a large MCE near room temperature, and also with our earlier results on the parent Fe-Rh alloy. The large effective refrigerant capacity in our sample is one of the largest achieved yet at room temperature with a significant improvement over the parent Fe-Rh system. (fast track communication)

Hysteresis in Magnetocaloric Materials

DEFF Research Database (Denmark)

von Moos, Lars

, obtained at the initial low and final high field. However, in first order materials thermal entropy hysteresis loops are obtained through characterization, corresponding to measurements done in an increasing and a decreasing temperature mode. Indirectly determining the MCE through the use of the Maxwell...... order materials, taking the magnetic and thermal history dependence of material properties into account, as well as the heat production due to hysteretic losses. MnFe(P,As) and Gd5Si2Ge2 compounds are modelled and it is found that the Preisach approach is suitable to reproduce material behavior in both......In this thesis the effects of hysteresis on magnetocaloric material properties and their performance in magnetic refrigeration devices are investigated. This is done through an experimental and model study of first order magnetocaloric materials MnFe(P,As) and Gd5Si2Ge2. The experimental...

Magnetic properties and magnetocaloric effect in the HoNi1−xCuxIn (x=0, 0.1, 0.3, 0.4) intermetallic compounds

International Nuclear Information System (INIS)

Mo, Zhao-Jun; Shen, Jun; Yan, Li-Qin; Tang, Cheng-Chun; He, Xiao-Nan; Zheng, Xinqi; Wu, Jian-Feng; Sun, Ji-Rong; Shen, Bao-Gen

2014-01-01

The magnetic properties and magnetocaloric effect (MCE) in HoNi 1−x Cu x In (x=0, 0.1, 0.3, 0.4) compounds have been investigated. With the substitution of Cu for Ni, the Ho magnetic moment will cant from the c-axis, and form a complicated magnetic structure. These compounds exhibit two successive magnetic transitions with the increase in temperature. The large reversible magnetocaloric effects have been observed in HoNi 1−x Cu x In compounds around T ord , with no thermal and magnetic hysteresis loss. The large reversible isothermal magnetic entropy change (−ΔS M ) is 20.2 J/kg K and the refrigeration capacity (RC) reaches 356.7 J/kg for field changes of 5 T for HoNi 0.7 Cu 0.3 In. Especially, the value of −ΔS M (12.5 J/kg K) and the large RC (132 J/kg) are observed for field changes of 2 T for HoNi 0.9 Cu 0.1 In. Additionally, the values of RC are improved to 149 J/K for the field changes of 2 T due to a wide temperature span for the mix of HoNi 0.9 Cu 0.1 In and HoNi 0.7 Cu 0.3 In compounds with the mass ratio of 1:1. These compounds with excellent MCE are expected to have effective applications in magnetic refrigeration around 20 K. - Highlights: • For magnetic-field changes of 2 T, the values of RC are improved to 149 J/K. • MCEs of these compounds show no thermal and magnetic hysteresis. • Compounds show two successive magnetic transitions with the increase in temperature. • With the substitution of Cu for Ni, compounds form a complicated magnetic structure

Anisotropic thermal conductivity in epoxy-bonded magnetocaloric composites

Science.gov (United States)

Weise, Bruno; Sellschopp, Kai; Bierdel, Marius; Funk, Alexander; Bobeth, Manfred; Krautz, Maria; Waske, Anja

2016-09-01

Thermal management is one of the crucial issues in the development of magnetocaloric refrigeration technology for application. In order to ensure optimal exploitation of the materials "primary" properties, such as entropy change and temperature lift, thermal properties (and other "secondary" properties) play an important role. In magnetocaloric composites, which show an increased cycling stability in comparison to their bulk counterparts, thermal properties are strongly determined by the geometric arrangement of the corresponding components. In the first part of this paper, the inner structure of a polymer-bonded La(Fe, Co, Si)13-composite was studied by X-ray computed tomography. Based on this 3D data, a numerical study along all three spatial directions revealed anisotropic thermal conductivity of the composite: Due to the preparation process, the long-axis of the magnetocaloric particles is aligned along the xy plane which is why the in-plane thermal conductivity is larger than the thermal conductivity along the z-axis. Further, the study is expanded to a second aspect devoted to the influence of particle distribution and alignment within the polymer matrix. Based on an equivalent ellipsoids model to describe the inner structure of the composite, numerical simulation of the thermal conductivity in different particle arrangements and orientation distributions were performed. This paper evaluates the possibilities of microstructural design for inducing and adjusting anisotropic thermal conductivity in magnetocaloric composites.

Experimental study of magnetocaloric effect in the two-level quantum system KTm(MoO4)2

Science.gov (United States)

Tarasenko, R.; Tkáč, V.; Orendáčová, A.; Orendáč, M.; Valenta, J.; Sechovský, V.; Feher, A.

2018-05-01

KTm(MoO4)2 belongs to the family of binary alkaline rare-earth molybdates. This compound can be considered to be an almost ideal quantum two-level system at low temperatures. Magnetocaloric properties of KTm(MoO4)2 single crystals were investigated using specific heat and magnetization measurement in the magnetic field applied along the easy axis. Large conventional magnetocaloric effect (-ΔSM ≈ 10.3 J/(kg K)) was observed in the magnetic field of 5 T in a relatively wide temperature interval. The isothermal magnetic entropy change of about 8 J/(kgK) has been achieved already for the magnetic field of 2 T. Temperature dependence of the isothermal entropy change under different magnetic fields is in good agreement with theoretical predictions for a quantum two-level system with Δ ≈ 2.82 cm-1. Investigation of magnetocaloric properties of KTm(MoO4)2 suggests that the studied system can be considered as a good material for magnetic cooling at low temperatures.

Effect of spin fluctuations in magnetocaloric and magnetoresistance properties of Dy10Co20Si70 alloy

Science.gov (United States)

Rashid, T. P.; Arun, K.; Curlik, Ivan; Ilkovic, Sergej; Reiffers, Marian; Dzubinska, Andrea; Nagalakshmi, R.

2017-09-01

Systematic investigations on the structure, magnetic, thermodynamic, magnetocaloric and magnetoresistance (MR) properties of the arc melted Dy10Co20Si70 alloy are presented. The Dy10Co20Si70 alloy crystallizes in tetragonal BaNiSn3-type DyCoSi3 (space group = I4mm; No. 107) as a major phase and CaF2-type CoSi2 (space group = Fm-3m; No. 225) and C-type Si (space group = Fd-3m; No. 227) as minor phases. The title compound exhibits multiple magnetic transitions having antiferromagnetic ordering at temperatures, viz., T1 = 10.8 K, T2 = 8.8 K and T3 = 3.3 K. The magnetic and thermodynamic studies confirm these magnetic anomalies in the compound. The large value of maximum magnetic entropy change, -ΔSMM a x = 16.4 and 26.6 J/kg K for the field change ΔH of 50 and 90 kOe, respectively, observed in the compound is associated with field induced magnetic transitions. Asymmetric broadening of the magnetic entropy change peaks above the ordering temperatures resulting in significant refrigerant capacities of 361 and 868 J/kg for ΔH = 50 and 90 kOe, respectively, in the compound is due to the spin fluctuation effect. The sign reversal in MR measurements is attributed to the field induced antiferromagnetic to ferromagnetic transition. A large positive MR (42% in 90 kOe) is observed at 2 K. The H2 dependence of both the magnetocaloric effect (MCE) and MR in the paramagnetic regime indicates the role of the applied magnetic field in suppressing the spin fluctuations. The large MCE and MR together with no thermal or magnetic hysteresis establish this new compound as an attractive multifunctional magnetic material.

Magnetocaloric effect in “reduced” dimensions: Thin films, ribbons, and microwires of Heusler alloys and related compounds: Magnetocaloric effect in “reduced” dimensions

Energy Technology Data Exchange (ETDEWEB)

Khovaylo, Vladimir V. [National University of Science and Technology MISiS, Moscow 119049 Russia; ITMO University, St. Petersburg 197101 Russia; Rodionova, Valeria V. [National University of Science and Technology MISiS, Moscow 119049 Russia; Innovation Park and Institute of Physics & Technology, Immanuel Kant Baltic Federal University, Kaliningrad 236041 Russia; Shevyrtalov, Sergey N. [Innovation Park and Institute of Physics & Technology, Immanuel Kant Baltic Federal University, Kaliningrad 236041 Russia; Novosad, Val [Materials Science Division, Argonne National Laboratory, Argonne IL 60439 USA

2014-08-19

Room temperature magnetic refrigeration is an energy saving and environmentally-friendly technology which has developed rapidly from a basic idea to prototype devices. The performance of magnetic refrigerators crucially depends on the magnetocaloric properties and the geometry of the employed refrigerants. Here we review the magnetocaloric properties of Heusler alloys and related compounds with a high surface to volume ratio such as films, ribbons and microwires, and compare them with their bulk counterparts.

Improvement of magnetocaloric properties of Gd-Ge-Si alloys by alloying with iron

Directory of Open Access Journals (Sweden)

Erenc-Sędziak T.

2013-01-01

Full Text Available The influence of annealing of Gd5Ge2Si2Fex alloys at 1200°C and of alloying with various amount of iron on structure as well as thermal and magnetocaloric properties is investigated. It was found that annealing for 1 to 10 hours improves the entropy change, but reduces the temperature of maximum magnetocaloric effect by up to 50 K. Prolonged annealing of the Gd5Ge2Si2 alloy results in the decrease of entropy change due to the reduction of Gd5Ge2Si2 phase content. Addition of iron to the ternary alloy enhances the magnetocaloric effect, if x = 0.4 – 0.6, especially if alloying is combined with annealing at 1200°C: the peak value of the isothermal entropy change from 0 to 2 T increases from 3.5 to 11 J/kgK. Simultaneously, the temperature of maximum magnetocaloric effect drops to 250 K. The changes in magnetocaloric properties are related to the change in phase transformation from the second order for arc molten ternary alloy to first order in the case of annealed and/or alloyed with iron. The results of this study indicate that the minor addition of iron and heat treatment to Gd-Ge-Si alloys may be useful in improving the materials’ magnetocaloric properties..

Developments in magnetocaloric refrigeration

International Nuclear Information System (INIS)

Brueck, Ekkes

2005-01-01

Modern society relies on readily available refrigeration. Magnetic refrigeration has three prominent advantages compared with compressor-based refrigeration. First, there are no harmful gases involved; second, it may be built more compactly as the working material is a solid; and third, magnetic refrigerators generate much less noise. Recently a new class of magnetic refrigerant-materials for room-temperature applications was discovered. These new materials have important advantages over existing magnetic coolants: they exhibit a large magnetocaloric effect (MCE) in conjunction with a magnetic phase-transition of first order. This MCE is larger than that of Gd metal, which is used in the demonstration refrigerators built to explore the potential of this evolving technology. In the present review we compare the different materials considering both scientific aspects and industrial applicability. Because fundamental aspects of MCE are not so widely discussed, we also give some theoretical considerations. (topical review)

Integration of a magnetocaloric heat pump in a low-energy residential building

DEFF Research Database (Denmark)

Johra, Hicham; Filonenko, Konstantin; Heiselberg, Per

2018-01-01

magnetocaloric effect of a solid refrigerant to build a cooling/heating cycle. It has the potential for high coefficient of performance, more silent operation and efficient part-load control. After presenting the operation principles of the magnetocaloric device and the different models used in the current...

Magnetocaloric properties and critical behavior of high relative cooling power FeNiB nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Chaudhary, V. [Interdisciplinary Graduate School, Nanyang Technological University, Singapore 639798 (Singapore); Energy Research Institute @NTU, Nanyang Technological University, Singapore 637553 (Singapore); School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798 (Singapore); Maheswar Repaka, D. V.; Chaturvedi, A.; Ramanujan, R. V., E-mail: ramanujan@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798 (Singapore); Sridhar, I. [School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore 639798 (Singapore)

2014-10-28

Low cost magnetocaloric nanomaterials have attracted considerable attention for energy efficient applications. We report a very high relative cooling power (RCP) in a study of the magnetocaloric effect in quenched FeNiB nanoparticles. RCP increases from 89.8 to 640 J kg{sup −1} for a field change of 1 and 5 T, respectively, these values are the largest for rare earth free iron based magnetocaloric nanomaterials. To investigate the magnetocaloric behavior around the Curie temperature (T{sub C}), the critical behavior of these quenched nanoparticles was studied. Detailed analysis of the magnetic phase transition using the modified Arrott plot, Kouvel-Fisher method, and critical isotherm plots yields critical exponents of β = 0.364, γ = 1.319, δ = 4.623, and α = −0.055, which are close to the theoretical exponents obtained from the 3D-Heisenberg model. Our results indicate that these FeNiB nanoparticles are potential candidates for magnetocaloric fluid based heat pumps and low grade waste heat recovery.

Investigation of magnetocaloric effect in La0.45Pr0.25Ca0.3MnO3 by magnetic, differential scanning calorimetry and thermal analysis

International Nuclear Information System (INIS)

Aparnadevi, M.; Barik, S.K.; Mahendiran, R.

2012-01-01

We investigated magnetocaloric effect in La 0.45 Pr 0.25 Ca 0.3 MnO 3 by direct methods (changes in temperature and latent heat) and indirect method (magnetization isotherms). This compound undergoes a first-order paramagnetic to ferromagnetic transition with T C =200 K upon cooling. The paramagnetic phase becomes unstable and it transforms into a ferromagnetic phase under the application of magnetic field, which results in a field-induced metamagnetic transition (FIMMT). The FIMMT is accompanied by release of latent heat and temperature of the sample as evidenced from differential scanning calorimetry and thermal analysis experiments. A large magnetic entropy change of ΔS m =−7.2 J kg −1 K −1 at T=212.5 K and refrigeration capacity of 228 J kg −1 are found for a field change of ΔH=5 T. It is suggested that destruction of magnetic polarons and growth of ferromagnetic phase accompanied by a lattice volume change with increasing magnetic field is responsible for the large magnetocaloric effect in this compound. - Highlights: ► We report magnetic entropy change measured by indirect and direct methods in La 0.45 Pr 0.25 Ca 0.3 MnO 3. ► Anomalous field-induced induced metamagnetic transition is found in the paramagnetic state. ► A large reversible magnetic entropy change (ΔS m =7.2 J kg −1 K −1 for ΔH=5 T). ► A large refrigeration capacity (RC=228 J kg −1 ). ► Collapse of magnetic polarons is suggested as possible origin of the large MCE.

Study of multi-layer active magnetic regenerators using magnetocaloric materials with first and second order phase transition

DEFF Research Database (Denmark)

Lei, Tian; Engelbrecht, Kurt; Nielsen, Kaspar Kirstein

2016-01-01

Magnetocaloric materials (MCM) with a first order phase transition (FOPT) usually exhibit a large, although sharp, isothermal entropy change near their Curie temperature, compared to materials with a second order phase transition (SOPT). Experimental results of applying FOPT materials in recent...

Numerical analysis of a magnetocaloric heat pump implementation into a residential building

DEFF Research Database (Denmark)

Johra, Hicham

of the magneto-caloric heat pump in a single hydronic loop coupling directly the heat source and the heat sink without additional heat exchangers. Moreover, several parameters can be controlled in order to perform efficient part load power generation. The objective of this work is to understand how to integrate...... a magneto-caloric heat pump into a residential building and establish a control strategy for such device. A numerical model of a single family house with water based under-floor heating and horizontal ground source heat exchanger is created. It is used to demonstrate the feasibility and the advantages...... of the integrated magneto-caloric heat pump system is compared with conventional heat pumps one....

Complex magnetic properties and large magnetocaloric effects in RCoGe (R=Tb, Dy compounds

Directory of Open Access Journals (Sweden)

Yan Zhang

2018-05-01

Full Text Available Complicated magnetic phase transitions and Large magnetocaloric effects (MCEs in RCoGe (R=Tb, Dy compounds have been reported in this paper. Results show that the TbCoGe compounds have a magnetic phase transition from antiferromagnetic to paramagnetic (AFM-PM at TN∼16 K, which is close to the value reported by neutron diffraction. The DyCoGe compound undergoes complicated phase changes from 2 K up to 300 K. The peak at 10 K displays a phase transition from antiferromagnetic to ferromagnetic (AFM-FM. In particular, a significant ferromagnetic to paramagnetic (FM-PM phase transition was found at the temperature as high as 175 K and the cusp becomes more abrupt with the magnetic field increasing from 0.01 T to 0.1 T. The maximum value of magnetic entropy change of TbCoGe and DyCoGe compounds achieve 14.5 J/kg K and 11.5 J/kg K respectively for a field change of 0-5 T. Additionally, the correspondingly considerable refrigerant capacity value of 260 J/kg and 242 J/kg are also obtained respectively, suggesting that both TbCoGe and DyCoGe compounds could be considered as good candidates for low temperature magnetic refrigerant.

Phase transitions and magnetocaloric effects in intermetallic compounds MnFeX (X=P, As, Si, Ge)

International Nuclear Information System (INIS)

Tegus, O.; Bao Li-Hong; Song Lin

2013-01-01

Since the discovery of giant magnetocaloric effect in MnFeP 1−x As x compounds, much valuable work has been performed to develop and improve Fe 2 P-type transition-metal-based magnetic refrigerants. In this article, the recent progress of our studies on fundamental aspects of theoretical considerations and experimental techniques, effects of atomic substitution on the magnetism and magnetocalorics of Fe 2 P-type intermetallic compounds MnFeX (X=P, As, Ge, Si) is reviewed. Substituting Si (or Ge) for As leads to an As-free new magnetic material MnFeP 1−x Si(Ge) x . These new materials show large magnetocaloric effects resembling MnFe(P, As) near room temperature. Some new physical phenomena, such as huge thermal hysteresis and ‘virgin’ effect, were found in new materials. On the basis of Landau theory, a theoretical model was developed for studying the mechanism of phase transition in these materials. Our studies reveal that MnFe(P, Si) compound is a very promising material for room-temperature magnetic refrigeration and thermo-magnetic power generation. (topical review - magnetism, magnetic materials, and interdisciplinary research)

The influence of quench atomic disorder on the magnetocaloric properties of Ni–Co–Mn–In alloys

International Nuclear Information System (INIS)

Singh, Sandeep; Glavatskyy, Illya; Biswas, C.

2014-01-01

Highlights: • Large magnetic entropy change (ΔS m = 11 J/Kg K) at 1.5 Tesla above 300 K is obtained. • The peak value of ΔS m is higher in disordered system. • Refrigeration capacity (RC) is unaffected by the quenched atomic disorder. - Abstract: The magnetocaloric effect in Ni–Co–Mn–In alloys is studied at low magnetic field, across the first order magnetostructural transition. The Co doping at Ni site induces the large magnetic entropy change (ΔS m ) above room temperature. The large ΔS m of 11 J/Kg K has been observed for disordered Ni 1.81 Co 0.22 Mn 1.46 In 0.51 alloy at 337 K at an applied field of 1.5 Tesla. The influence of quench atomic disorder on the magnetocaloric properties of Ni–Co–Mn–In alloys has been studied. The atomic disorder significantly increases the peak value of ΔS m and decreases the peak width. The refrigeration capacity (RC) is almost unchanged with atomic disorder

Innovative Methodological Approaches for evaluating the Magnetocaloric Effect in Functional Materials

OpenAIRE

Cugini, Francesco

2018-01-01

The experimental characterization of magnetocaloric effect has a fundamental role in the development of an efficient, environmentally friendly and cost-effective room-temperature magnetic refrigeration technology. The proper measure of the magnetocaloric effect as a function of temperature and magnetic field, in terms of adiabatic temperature change and isothermal entropy change, is required to compare the potentiality of different materials and to lead to their development. Moreover, the tes...

Developing a Magnetocaloric Domestic Heat Pump

DEFF Research Database (Denmark)

Bahl, Christian R.H.

2014-01-01

beverage coolers, A/Cs for cars and electronics cooling. Devices for heating have not been extensively demonstrated. Here we consider a promising application of magnetocaloric heat pumps for domestic heating. The task of designing and building such a device is a multidisciplinary one encompassing materials...

Reversible and irreversible magnetocaloric effect in the NdBa{sub 2}Cu{sub 3}O{sub 7} superconductor in relation to specific heat and magnetization

Energy Technology Data Exchange (ETDEWEB)

Plackowski, T [Departement de Physique de la Matiere Condensee, Universite de Geneve, CH-1211 Geneva 4 (Switzerland); Institute of Low Temperature and Structure Research, ulica Okolna 2, 50-422 Wroclaw (Poland); Wang, Y [Departement de Physique de la Matiere Condensee, Universite de Geneve, CH-1211 Geneva 4 (Switzerland); Lortz, R [Departement de Physique de la Matiere Condensee, Universite de Geneve, CH-1211 Geneva 4 (Switzerland); Junod, A [Departement de Physique de la Matiere Condensee, Universite de Geneve, CH-1211 Geneva 4 (Switzerland); Wolf, Th [Forschungszentrum Karlsruhe, Institut fuer Technische Physik, Postfach 3640, D-76021Karlsruhe (Germany)

2005-11-02

A recently developed technique for measuring the isothermal magnetocaloric coefficient (M{sub T}) is applied to the study of a superconducting NdBa{sub 2}Cu{sub 3}O{sub 7} single crystal. Results are compared with magnetization (M) and specific heat (C). In the reversible region both C and M{sub T} follow the scaling law of the 3D-xy universality class. The anomalies connected with flux-line lattice melting are visible on M{sub T}(B) curves as peaks and steps, similar to C(T) curves yet with much smaller background. At lower temperature, in the irreversible region the M{sub T}(B) behaviour resembles more that of M(B), exhibiting the 'fishtail' effect. Our results confirm that the peculiarities of the phase diagram known from the high-temperature superconductor YBa{sub 2}Cu{sub 3}O{sub 7}, e.g. vortex melting, dominance of critical fluctuations and absence of a B{sub c2} critical field line, are a common property of RE-123 systems.

Magnetocaloric effect in Heusler alloys Ni50Mn34In16 and Ni50Mn34Sn16

Science.gov (United States)

Sharma, V. K.; Chattopadhyay, M. K.; Kumar, Ravi; Ganguli, Tapas; Tiwari, Pragya; Roy, S. B.

2007-12-01

We present results of detailed ac susceptibility, magnetization and specific heat measurements in Heusler alloys Ni50Mn34In16 and Ni50Mn34Sn16. These alloys undergo a paramagnetic to ferromagnetic transition around 305 K, which is followed by a martensitic transition in the temperature regime around 220 K. Inside the martensite phase both the alloys show signatures of field-induced transition from martensite to austenite phase. Both field- and temperature-induced martensite-austenite transitions are relatively sharp in Ni50Mn34In16. We estimate the isothermal magnetic entropy change and adiabatic temperature change across the various phase transitions in these alloys and investigate the possible influence of these transitions on the estimated magnetocaloric effect. The sharp martensitic transition in Ni50Mn34In16 gives rise to a comparatively large inverse magnetocaloric effect across this transition. On the other hand the magnitudes of the conventional magnetocaloric effect associated with the paramagnetic to ferromagnetic transition are quite comparable in these alloys.

Magnetocaloric piezoelectric composites for energy harvesting

International Nuclear Information System (INIS)

Cleveland, Michael; Liang, Hong

2012-01-01

Magnetocaloric alloy, Gd 5 Si 2 Ge 2 , was developed into a composite with the poly(vinylidene fluoride) (PVDF) piezoelectric polymer. This multifunctional material possesses unique properties that are suitable for energy conversion and harvesting. Experimental approaches include using an arc melting technique to synthesize the Gd 5 Si 2 Ge 2 (GSG) alloy and the spinning casting method to fabricate the composite. The materials were characterized using various techniques at different length scales. These include atomic force microscopy (AFM), optical microscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS). The results indicated that the phase transformation of the magnetocaloric material close to its Curie temperature induced a significant increase in power generation in the piezoelectric polymer. The power output of a laminated structure was 1.1 mW, more than 200 thousand times higher than the piezoelectric materials alone (5.1 nW). (technical note)

Reversible magnetic-field-induced martensitic transformation over a wide temperature window in Ni42-xCoxCu8Mn37Ga13 alloys

Science.gov (United States)

Hua, Hui; Wang, Jingmin; Jiang, Chengbao; Xu, Huibin

2018-05-01

Ni42-xCoxCu8Mn37Ga13 (0 ≤ x ≤ 14) alloys are reported to exhibit a magnetostructural transition from weakly-magnetic martensite to ferromagnetic austenite over a rather wide temperature window ranging from 200 K to 380 K. Simultaneously a large magnetization change Δσ of up to 105 Am2 kg-1 is obtained at the martensitic transformation. A reversible magnetic-field-induced martensitic transformation is realized, resulting in a large magnetocaloric effect related to the high magnetic entropy change with a broad working temperature span. This work shows how it is possible to effectively tailor the magnetostructural transition in Ni-Mn-Ga alloys so as to achieve a reversible magnetic-field-induced martensitic transformation and associated functionalities.

Magnetocaloric effect of Gd 5 Si 2 Ge 2 alloys in low magnetic field

Indian Academy of Sciences (India)

The magnetocaloric effect (MCE) is studied by measuring magnetic entropy change ( M) and adiabatic temperature change ( ad) in a magnetic field of 1.5 T using a vibrating sample magnetometer (VSM) and a home-made magnetocaloric effect measuring apparatus, respectively. The maximum M of the alloys ...

FAST TRACK COMMUNICATION: Reproducible room temperature giant magnetocaloric effect in Fe-Rh

Science.gov (United States)

Manekar, Meghmalhar; Roy, S. B.

2008-10-01

We present the results of magnetocaloric effect (MCE) studies in polycrystalline Fe-Rh alloy over a temperature range of 250-345 K across the first order antiferromagnetic to ferromagnetic transition. By measuring the MCE under various thermomagnetic histories, contrary to the long held belief, we show here explicitly that the giant MCE in Fe-Rh near room temperature does not vanish after the first field cycle. In spite of the fact that the virgin magnetization curve is lost after the first field cycle near room temperature, reproducibility in the MCE under multiple field cycles can be achieved by properly choosing a combination of isothermal and adiabatic field variation cycles in the field-temperature phase space. This reproducible MCE leads to a large effective refrigerant capacity of 324.42 J kg-1, which is larger than that of the well-known magnetocaloric material Gd5Si2Ge2. This information could be important as Fe-Rh has the advantage of having a working temperature of around 300 K, which can be used for room temperature magnetic refrigeration.

Influence of atomic ordering on elastocaloric and magnetocaloric effects of a Ni–Cu–Mn–Ga ferromagnetic shape memory alloy

International Nuclear Information System (INIS)

Huang, Chonghui; Wang, Yu; Tang, Zhao; Liao, Xiaoqi; Yang, Sen; Song, Xiaoping

2015-01-01

Highlights: • Ni 51 Cu 4 Mn 20 Ga 25 alloy exhibits normal elastocaloric and magnetocaloric effects. • L2 1 atomic order of the alloy is increased after annealing at 773 K for 10 h. • Increasing L2 1 atomic order improves its elastocaloric and magnetocaloric effects. • Atomic ordering modifies the magnetic and martensitic transitions of the system. - Abstract: The coexisting elastocaloric and magnetocaloric effects in ferromagnetic shape memory alloys have attracted much attention for the potential application in solid state refrigeration. Previous studies show that the L2 1 atomic ordering of Heusler ferromagnetic shape memory alloys plays important role on their magnetocaloric effect. However, no research work investigates the effect of atomic ordering on their elastocaloric effect yet. In this study, we investigated the influence of atomic ordering on the elastocaloric and magnetocaloric effects of a Ni 51 Cu 4 Mn 20 Ga 25 ferromagnetic shape memory alloy. The alloy exhibits normal elastocaloric effect and normal magnetocaloric effect near room temperature. Moreover, we found that the enhancement of atomic order in this alloy can greatly increase the entropy change and refrigeration capacity of its elastocaloric and magnetocaloric effects. This is attributed to that the atomic ordering modifies the magnetic and martensitic transitions of the system

Influence of the materials magnetic state on the accurate determination of the magnetocaloric effect

Directory of Open Access Journals (Sweden)

Forchelet J.

2012-06-01

Full Text Available In this paper, we report a detailed study of the magnetocaloric effect (MCE in different first order magnetic transition (FOMT materials with different situation of the magnetic state (magnetic order. For this purpose, R-Co2, MnAs based compounds were considered in this study. The MCE is discussed in terms of Maxwell relation (MR and Clausius-Clapeyron (C-C equation. The deviation observed between both methods is discussed and analyzed. On the other hand, practically all the reported data of the MCE in the literature are associated to the applied external magnetic field and have not been corrected taking into account the demagnetization effect related to the materials shape. The obtained results demonstrate that this phenomenon can alter drastically the MCE values by cancelling out a large part of the external field, resulting in spurious values of the measured MCE. The effect of the demagnetization field on the magnetocaloric performances is also the subject of this paper.

Magnetocaloric properties of a frustrated Blume-Capel antiferromagnet

Directory of Open Access Journals (Sweden)

Žukovič Milan

2014-07-01

Full Text Available Low-temperature magnetization processes and magnetocaloric properties of a geometrically frustrated spin-1 Blume-Capel model on a triangular lattice are studied by Monte Carlo simulations. The model is found to display qualitatively different behavior depending on the sign of the single-ion anisotropy D. For positive values of D we observe two magnetization plateaus, similar to the spin-1/2 Ising antiferromagnet, and negative isothermal entropy changes for any field intensity. For a range of small negative values of D there are four magnetization plateaus and the entropy changes can be either negative or positive, depending on the field. If D is negative but large in absolute value then the entropy changes are solely positive.

Operational test of bonded magnetocaloric plates

DEFF Research Database (Denmark)

Bahl, Christian; Navickaité, Kristina; Neves Bez, Henrique

2017-01-01

Bonded plates made by hot pressing La0.85Ce0.15Fe11.25Mn0.25Si1.5Hy particles and resin have been tested as active magnetic regenerators in a small scale magnetocaloric device. Firstly the plates were carefully characterised magnetically and thermally. The plates were prepared with 5 wt% resin...

High performance magnetocaloric perovskites for magnetic refrigeration

DEFF Research Database (Denmark)

Bahl, Christian R. H.; Velazquez, David; Nielsen, Kaspar K.

2012-01-01

We have applied mixed valance manganite perovskites as magnetocaloric materials in a magnetic refrigeration device. Relying on exact control of the composition and a technique to process the materials into single adjoined pieces, we have observed temperature spans above 9 K with two materials...

Influence of atomic ordering on elastocaloric and magnetocaloric effects of a Ni–Cu–Mn–Ga ferromagnetic shape memory alloy

Energy Technology Data Exchange (ETDEWEB)

Huang, Chonghui [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter and State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049 (China); Wang, Yu, E-mail: yuwang@mail.xjtu.edu.cn [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter and State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049 (China); Multi-disciplinary Materials Research Center, Frontier Institute of Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); Tang, Zhao; Liao, Xiaoqi; Yang, Sen; Song, Xiaoping [MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter and State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049 (China)

2015-05-05

Highlights: • Ni{sub 51}Cu{sub 4}Mn{sub 20}Ga{sub 25} alloy exhibits normal elastocaloric and magnetocaloric effects. • L2{sub 1} atomic order of the alloy is increased after annealing at 773 K for 10 h. • Increasing L2{sub 1} atomic order improves its elastocaloric and magnetocaloric effects. • Atomic ordering modifies the magnetic and martensitic transitions of the system. - Abstract: The coexisting elastocaloric and magnetocaloric effects in ferromagnetic shape memory alloys have attracted much attention for the potential application in solid state refrigeration. Previous studies show that the L2{sub 1} atomic ordering of Heusler ferromagnetic shape memory alloys plays important role on their magnetocaloric effect. However, no research work investigates the effect of atomic ordering on their elastocaloric effect yet. In this study, we investigated the influence of atomic ordering on the elastocaloric and magnetocaloric effects of a Ni{sub 51}Cu{sub 4}Mn{sub 20}Ga{sub 25} ferromagnetic shape memory alloy. The alloy exhibits normal elastocaloric effect and normal magnetocaloric effect near room temperature. Moreover, we found that the enhancement of atomic order in this alloy can greatly increase the entropy change and refrigeration capacity of its elastocaloric and magnetocaloric effects. This is attributed to that the atomic ordering modifies the magnetic and martensitic transitions of the system.

The normal and inverse magnetocaloric effect in RCu2 (R=Tb, Dy, Ho, Er) compounds

International Nuclear Information System (INIS)

Zheng, X.Q.; Xu, Z.Y.; Zhang, B.; Hu, F.X.; Shen, B.G.

2017-01-01

Orthorhombic polycrystalline RCu 2 (R=Tb, Dy, Ho and Er) compounds were synthesized and the magnetic properties and magnetocaloric effect (MCE) were investigated in detail. All of the RCu 2 compounds are antiferromagnetic (AFM) ordered. As temperature increases, RCu 2 compounds undergo an AFM to AFM transition at T t and an AFM to paramagnetic (PM) transition at T N . Besides of the normal MCE around T N , large inverse MCE around T t was found in TbCu 2 compound. Under a field change of 0–7 T, the maximal value of inverse MCE is even larger than the value of normal MCE around T N for TbCu 2 compound. Considering of the normal and inverse MCE, TbCu 2 shows the largest refrigerant capacity among the RCu 2 (R=Tb, Dy, Ho and Er) compounds indicating its potential applications in low temperature multistage refrigeration. - Highlights: • Large inverse magnetocaloric effect is observed in TbCu 2 compound. • The AFM to AFM transition is observed in RCu 2 (R=Tb, Dy, Ho, Er) compounds. • The MCE performance of TbCu 2 compound is evaluated in a more comprehensively way.

Magnetocaloric refrigeration near room temperature (invited)

International Nuclear Information System (INIS)

Brueck, E.; Tegus, O.; Thanh, D.T.C.; Buschow, K.H.J.

2007-01-01

Modern society relies on readily available refrigeration. The ideal cooling machine would be a compact, solid state, silent and energy-efficient heat pump that does not require maintenance. Magnetic refrigeration has three prominent advantages compared to compressor-based refrigeration. First, there are no harmful gases involved, second it may be built more compact as the working material is a solid and third magnetic refrigerators generate much less noise. Recently, a new class of magnetic refrigerant materials for room-temperature applications was discovered. These new materials have important advantages over existing magnetic coolants: They exhibit a large magnetocaloric effect (MCE) in conjunction with a magnetic phase transition of first order. This MCE is, larger than that of Gd metal, which is used in the demonstration refrigerators built to explore the potential of this evolving technology. In the present review, we compare the different materials considering both scientific aspects and industrial applicability

Influence of Si and Ge on the magnetic phase transition and magnetocaloric properties of MnFe(P, Si, Ge)

International Nuclear Information System (INIS)

Cam Thanh, D.T.; Brueck, E.; Tegus, O.; Klaasse, J.C.P.; Buschow, K.H.J.

2007-01-01

Recently, we found a large magnetocaloric effect (MCE) and favourable magnetic properties in low cost and nontoxic MnFe(P, Si, Ge) compounds [D.T. Cam Thanh, E. Brueck, O. Tegus, J.C.P. Klaasse, T.J. Gortenmulder, K.H.J. Buschow, J. Appl. Phys. 99 (2006) 08Q107]. These compounds are promising for magnetic refrigeration applications. One of the interesting points in these compounds is a nonlinear dependence of the Curie temperature (T C ) on Si concentration. This dependence is associated with the change in the lattice parameters a and c, and their ratio c/a. Compounds with larger a parameter and smaller c/a ratio have higher T C . It is clear that Si and Ge atoms play an important role in the magnetic and magnetocaloric properties in the MnFe(P, Si, Ge) compounds. In this paper, we study the effect of Si and Ge on the magnetic phase transition in these materials. Our study shows that the temperature of the phase transition, from paramagnetic to ferromagnetic, can be tuned in the room temperature range without losing giant magnetocaloric properties

The effect of plastic deformation on magnetic and magnetocaloric properties of Gd-B alloys

Science.gov (United States)

Taskaev, Sergey; Skokov, Konstantin; Karpenkov, Dmitry; Khovaylo, Vladimir; Ulyanov, Maxim; Bataev, Dmitry; Dyakonov, Alexandr; Fazlitdinova, Alfiya; Gutfleisch, Oliver

2017-11-01

We report on the magnetocaloric effect in Gd100-xBx (x = 0, 10, 15) cold rolled ribbons. A moderate entropy change ΔS = 5 J/kg·K and adiabatic change of ΔT = 4.8 K were observed for the as-cast materials in an external magnetic field of 3 T which is less by 20% in comparison with the pure gadolinium metal. It was found that a significant (up to 70%) depression of magnetization and magnetocaloric properties developed in the course of plastic deformation can completely be restored by means of a high temperature heat treatment. It is concluded that cold rolling is one promising technique for producing foil shaped magnetocaloric materials suitable for designing heat exchangers of magnetic cooling devices.

The large-s field-reversed configuration experiment

International Nuclear Information System (INIS)

Hoffman, A.L.; Carey, L.N.; Crawford, E.A.; Harding, D.G.; DeHart, T.E.; McDonald, K.F.; McNeil, J.L.; Milroy, R.D.; Slough, J.T.; Maqueda, R.; Wurden, G.A.

1993-01-01

The Large-s Experiment (LSX) was built to study the formation and equilibrium properties of field-reversed configurations (FRCs) as the scale size increases. The dynamic, field-reversed theta-pinch method of FRC creation produces axial and azimuthal deformations and makes formation difficult, especially in large devices with large s (number of internal gyroradii) where it is difficult to achieve initial plasma uniformity. However, with the proper technique, these formation distortions can be minimized and are then observed to decay with time. This suggests that the basic stability and robustness of FRCs formed, and in some cases translated, in smaller devices may also characterize larger FRCs. Elaborate formation controls were included on LSX to provide the initial uniformity and symmetry necessary to minimize formation disturbances, and stable FRCs could be formed up to the design goal of s = 8. For x ≤ 4, the formation distortions decayed away completely, resulting in symmetric equilibrium FRCs with record confinement times up to 0.5 ms, agreeing with previous empirical scaling laws (τ∝sR). Above s = 4, reasonably long-lived (up to 0.3 ms) configurations could still be formed, but the initial formation distortions were so large that they never completely decayed away, and the equilibrium confinement was degraded from the empirical expectations. The LSX was only operational for 1 yr, and it is not known whether s = 4 represents a fundamental limit for good confinement in simple (no ion beam stabilization) FRCs or whether it simply reflects a limit of present formation technology. Ideally, s could be increased through flux buildup from neutral beams. Since the addition of kinetic or beam ions will probably be desirable for heating, sustainment, and further stabilization of magnetohydrodynamic modes at reactor-level s values, neutral beam injection is the next logical step in FRC development. 24 refs., 21 figs., 2 tabs

Effect of low temperature annealing on magneto-caloric effect of Ni–Mn–Sn–Al ferromagnetic shape memory alloy

Energy Technology Data Exchange (ETDEWEB)

Agarwal, Sandeep [Haldia Institute of Technology, Haldia 721657, West Bengal (India); LCMP, Department of Condensed Matter Physics and Material Sciences, S.N. Bose National Centre for Basic Sciences, JD Block, Salt Lake, Kolkata 700098 (India); Stern-Taulats, Enric; Mañosa, Lluís [Departament d’Estructura i Constituents de la Matèria, Facultat de Física, Universitat de Barcelona, 08028 Barcelona, Catalonia (Spain); Mukhopadhyay, P.K., E-mail: pkm@bose.res.in [LCMP, Department of Condensed Matter Physics and Material Sciences, S.N. Bose National Centre for Basic Sciences, JD Block, Salt Lake, Kolkata 700098 (India)

2015-08-25

Highlights: • Magnetic properties of the system changed after secondary heat treatment. • MCE was enhanced after Al was partially replaced with Sn in Ni–Mn–Al system. • Suitable heat treatment further increased overall MCE in the sample. • Change in magnetic properties occurred due to change in atomic ordering. - Abstract: We studied the effect of low temperature annealing on the atomic ordering and consequent changes in the magnetization and magnetocaloric effect of the sample. The annealing at lower temperatures initially decreased the magnetization and magnetocaloric effect in the sample, but at higher annealing temperatures both increased. The changes in magnetization and magnetocaloric effect arise from the change in atomic ordering. We have shown that post quenching heat treatment offers easy way of optimizing the alloy for magnetocaloric effect. In order to verify that there was no overestimation in the measurement of magnetocaloric effect we also performed an infield calorimetric measurements and compared them with those from the magnetization measurements. We did not find remarkable difference between them.

Magnetocaloric effect in Ni{sub 2}MnGa single crystal in the vicinity of the martensitic phase transition

Energy Technology Data Exchange (ETDEWEB)

Radelytskyi, I., E-mail: radel@ifpan.edu.pl [Institute of Physics, PAS, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Pękała, M. [Department of Chemistry, University of Warsaw, Al. Zwirki i Wigury 101, 02-089 Warsaw (Poland); Szymczak, R. [Institute of Physics, PAS, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Gawryluk, D.J. [Institute of Physics, PAS, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Laboratory for Scientific Developments and Novel Materials, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Berkowski, M.; Fink-Finowicki, J. [Institute of Physics, PAS, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Diduszko, R. [Tele and Radio Research Institute, ul Ratuszowa 11, 03-450 Warsaw (Poland); Dyakonov, V.; Szymczak, H. [Institute of Physics, PAS, Al. Lotnikow 32/46, 02-668 Warsaw (Poland)

2017-05-15

The magnetocaloric effect in the vicinity of the martensitic transformation for a single crystalline alloy with a composition close to the stoichiometric Ni{sub 2}MnGa has been determined indirectly by M(T,H) magnetization measurements. It has an inverse character. The magnetocaloric parameters, i.e., the magnetic entropy change, refrigeration capacity and various hysteretic effects have been calculated from the M(T,H) dependences. Besides the martensitic transition a weak entirely separated intermartensitic transition was observed. These two successive magneto-structural transformations give contributions to the observed magnetocaloric effect. Unusual dependence of entropy change as a function of magnetic field has been explained as arising because of two different mechanisms. Additionally, to confirm that studied martensitic transformation is a first order phase transition electrical resistivity and thermoelectric power measurements have been performed. - Highlights: • Inverse magnetocaloric effect in Ni{sub 50.4}Mn{sub 24.9}Ga{sub 24.7} single crystal was measured. • The martensitic and separated intermartensitic transition were investigated. • Anisotropy of measured magnetocaloric effect was discussed.

Magnetic and magnetocaloric properties of amorphous Y{sub 3}Fe{sub 5}O{sub 12} compound

Energy Technology Data Exchange (ETDEWEB)

Nóbrega, E.P., E-mail: pilad@cbpf.br; Costa, S.S.; Alvarenga, T.S.T.; Alho, B.P.; Caldas, A.; Ribeiro, P.O.; Sousa, V.S.R de; Oliveira, N.A. de; Ranke, P.J. von

2017-01-15

We report a theoretical model formed by two coupled magnetic sublattices of localized spins in the presence of an applied magnetic field to investigate the magnetic characteristics and magnetocaloric properties of amorphous yttrium iron garnet. The magnetic state equation is based on Handrich–Kobe´s theory, where the amorphization is taken into account by introducing fluctuations in the exchange parameters. Experimental results report that Y{sub 3}Fe{sub 5}O{sub 12} presents a structural phase transition from crystalline to amorphous caused by a variation of external pressure. This phase transition on Y{sub 3}Fe{sub 5}O{sub 12} leads to interesting results in the magnetic properties and magnetocaloric quantities. - Highlights: • Study of magnetic and magnetocaloric properties of amorphous Y{sub 3}Fe{sub 5}O{sub 12} compound. • Theoretical model formed by two coupled magnetic sublattices of localized spins in the presence of an applied magnetic field. • The influence of crystalline/amorphous transition on the magnetocaloric effect.

Investigation of magnetocaloric effect in La{sub 0.45}Pr{sub 0.25}Ca{sub 0.3}MnO{sub 3} by magnetic, differential scanning calorimetry and thermal analysis

Energy Technology Data Exchange (ETDEWEB)

Aparnadevi, M; Barik, S K [Department of Physics, 2 Science Drive 3, National University of Singapore, Lower Kent Ridge Road, Singapore-117 452 (Singapore); Mahendiran, R [Department of Physics, 2 Science Drive 3, National University of Singapore, Lower Kent Ridge Road, Singapore-117 452 (Singapore)

2012-10-15

We investigated magnetocaloric effect in La{sub 0.45}Pr{sub 0.25}Ca{sub 0.3}MnO{sub 3} by direct methods (changes in temperature and latent heat) and indirect method (magnetization isotherms). This compound undergoes a first-order paramagnetic to ferromagnetic transition with T{sub C}=200 K upon cooling. The paramagnetic phase becomes unstable and it transforms into a ferromagnetic phase under the application of magnetic field, which results in a field-induced metamagnetic transition (FIMMT). The FIMMT is accompanied by release of latent heat and temperature of the sample as evidenced from differential scanning calorimetry and thermal analysis experiments. A large magnetic entropy change of {Delta}S{sub m}=-7.2 J kg{sup -1} K{sup -1} at T=212.5 K and refrigeration capacity of 228 J kg{sup -1} are found for a field change of {Delta}H=5 T. It is suggested that destruction of magnetic polarons and growth of ferromagnetic phase accompanied by a lattice volume change with increasing magnetic field is responsible for the large magnetocaloric effect in this compound. - Highlights: Black-Right-Pointing-Pointer We report magnetic entropy change measured by indirect and direct methods in La{sub 0.45}Pr{sub 0.25}Ca{sub 0.3}MnO{sub 3.} Black-Right-Pointing-Pointer Anomalous field-induced induced metamagnetic transition is found in the paramagnetic state. Black-Right-Pointing-Pointer A large reversible magnetic entropy change ({Delta}S{sub m}=7.2 J kg{sup -1} K{sup -1} for {Delta}H=5 T). Black-Right-Pointing-Pointer A large refrigeration capacity (RC=228 J kg{sup -1}). Black-Right-Pointing-Pointer Collapse of magnetic polarons is suggested as possible origin of the large MCE.

Effect of terbium substitution on the magnetocaloric properties of Gd3Ga5O12

International Nuclear Information System (INIS)

Reshmi, C.P.; Savitha Pillai, S.; Varma, Manoj Raama; Suresh, K.G.

2011-01-01

The magnetic refrigeration is an environment friendly cooling technology based on magnetocaloric effect. The most crucial ingredient behind a magnetic refrigerator is a magnetic material which possesses large magnetocaloric effect. Certain materials when placed in a magnetic field suddenly get heats up and suddenly cooled down by the application and the removal of magnetic field due to their change in entropy. This is measured either in terms of isothermal entropy change and adiabatic temperature change observed when the applied magnetic field is varied. The refrigerators which operate below 15K have applications in liquefying helium and for the development of space based cooling system for the space crafts. The material of choice in this temperature range is rare earth gallium garnets. Rare earth garnets are complex ceramic oxides having the chemical formula A 3 B 2 C 3 O 12 have attracted attention due to their interesting magnetic properties. The magnetism in R 3 Ga 5 O 12 is due to the exchange interaction between the rare earth spins. In the proposed work we have chosen Gd 3 Ga 5 O 12 as parent material, substituted Tb systematically in the place of Gd. The structural studies were done by using Rietveld analysis of X-Ray diffraction. There is a systematic variation of volume and lattice parameter upon substitution of Tb. The magnetic characterizations were done by a vibrating sample magnetometer. The experimental magnetic moments of the materials were calculated from the M-T curve by using Curie-Weiss fit and are good agreement with the theoretical values. There is a systematic increase of magnetic moments by Tb substitution. The magnetocaloric effect is calculated by using the integrated Maxwell's relation from the magnetization data. At low magnetic fields the Tb substituted compounds show good MCE values than GGG. Tb substitution enhances the magnetocaloric effect at low magnetic fields and the ΔS M values are higher for x = 1 and 3 at 1T. Hence these

Influence of magnetic field, chemical pressure and hydrostatic pressure on the structural and magnetocaloric properties of the Mn-Ni-Ge system

Science.gov (United States)

Taubel, Andreas; Gottschall, Tino; Fries, Maximilian; Faske, Tom; Skokov, Konstantin P.; Gutfleisch, Oliver

2017-11-01

The magnetic, structural and thermomagnetic properties of the MM’X material system of MnNiGe are evaluated with respect to their utilization in magnetocaloric refrigeration. The effects of separate and simultaneous substitution of Fe for Mn and Si on the Ge site are analysed in detail to highlight the benefits of the isostructural alloying method. A large range of compounds with precisely tunable structural and magnetic properties and the tuning of the phase transition by chemical pressure are compared to the effect of hydrostatic pressure on the martensitic transition. We obtained very large isothermal entropy changes Δ S_iso of up to -37.8 J kg-1 K-1 based on magnetic measurements for (Mn,Fe)NiGe in moderate fields of 2 T. The enhanced magnetocaloric properties for transitions around room temperature are demonstrated for samples with reduced Ge, a resource critical element. An adiabatic temperature change of 1.3 K in a magnetic field change of 1.93 T is observed upon direct measurement for a sample with Fe and Si substitution. However, the high volume change of 2.8% results in an embrittlement of large particles into several smaller fragments and leads to a sensitivity of the magnetocaloric properties towards sample shape and size. On the other hand, this large volume change enables to induce the phase transition with a large shift of the transition temperature by application of hydrostatic pressure (72 K GPa-1 ). Thus, the effect of 1.88 GPa is equivalent to a substitution of 10% Fe for Mn and can act as an additional stimulus to induce the phase transition and support the low magnetic field dependence of the phase transition temperature for multicaloric applications.

Phase transitions, magnetotransport and magnetocaloric effects in a new family of quaternary Ni-Mn-In-Z Heusler alloys.

Science.gov (United States)

Kazakov, Alexander; Prudnikov, Valerii; Granovsky, Alexander; Perov, Nikolai; Dubenko, Igor; Pathak, Arjun Kumar; Samanta, Tapas; Stadler, Shane; Ali, Naushad; Zhukov, Arcady; Ilyin, Maxim; Gonzalez, Julian

2012-09-01

The magnetic, magnetotransport, and magnetocaloric properties near compound phase transitions in Ni50Mn35In14Z (Z = In, Ge, Al), and Ni48Co2Mn35In15 Heusler alloys have been studied using VSM and SQUID magnetometers (at magnetic fields (H) up to 5 T), four-probe method (at H = 0.005-1.5 T), and an adiabatic magnetocalorimeter (for H changes up to deltaH = 1.8 T), respectively. The martensitic transformation (MT) is accompanied by large magnetoresistance (up to 70%), a significant change in resistivity (up to 200%), and a sign reversal of the ordinary Hall effect coefficient, all related to a strong change in the electronic spectrum at the MT. The field dependences of the Hall resistance are complex in the vicinity of the MT, indicating a change in the relative concentrations of the austenite and martensite phases at strong fields. Negative and positive changes in adiabatic temperatures of about -2 K and +2 K have been observed in the vicinity of MT and Curie temperatures, respectively, for deltaH = 1.8 T.

Analysis of the Anisotropic Magnetocaloric Effect in RMn2O5 Single Crystals

Directory of Open Access Journals (Sweden)

Mohamed Balli

2017-11-01

Full Text Available Thanks to the strong magnetic anisotropy shown by the multiferroic RMn2O5 (R = magnetic rare earth compounds, a large adiabatic temperature change can be induced (around 10 K by rotating them in constant magnetic fields instead of the standard magnetization-demagnetization method. Particularly, the TbMn2O5 single crystal reveals a giant rotating magnetocaloric effect (RMCE under relatively low constant magnetic fields reachable by permanent magnets. On the other hand, the nature of R3+ ions strongly affects their RMCEs. For example, the maximum rotating adiabatic temperature change exhibited by TbMn2O5 is more than five times larger than that presented by HoMn2O5 in a constant magnetic field of 2 T. In this paper, we mainly focus on the physics behind the RMCE shown by RMn2O5 multiferroics. We particularly demonstrate that the rare earth size could play a crucial role in determining the magnetic order, and accordingly, the rotating magnetocaloric properties of RMn2O5 compounds through the modulation of exchange interactions via lattice distortions. This is a scenario that seems to be supported by Raman scattering measurements.

Microstructure evolution and large magnetocaloric effect of La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2 alloy prepared by strip-casting and annealing

Science.gov (United States)

Zhong, X. C.; Feng, X. L.; Huang, J. H.; Zhang, H.; Huang, Y. L.; Liu, Z. W.; Jiao, D. L.

2018-04-01

The microstructure and magnetocaloric effect of the La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2 strip-cast flakes annealed between 1273K and 1423K for different time have been investigated. For the flakes annealed for 2h from 1273K to 1423K, the shape and distribution of α-Fe, La-rich and NaZn13-type 1:13 phases are quite sensitive to the annealing temperature. Especially, at a high annealing temperature of 1423K, the 1:13 phase began to decompose into macroscopic α-Fe conglomerations and La-rich dendrites. With the increase of annealing time from 0 to 12h at 1323K, the amount of 1:13 phase increased significantly and reached ˜93.50 wt.% at 12h. However, an overlong annealing time also led to 1:13 phase decomposition and influenced the magnetic performance. For the flakes annealed at 1323K for 12h, large magnetic entropy change value of 18.12Jkg-1K-1 at 5T has been obtained. The present results indicate that strip casting method can potentially be used in mass production of high performance magnetocaloric materials.

(Dy0.5Er0.5)Al2: A large magnetocaloric effect material for low-temperature magnetic refrigeration

International Nuclear Information System (INIS)

Gschneidner, K.A. Jr.; Takeya, H.; Moorman, J.O.; Pecharsky, V.K.

1994-01-01

The low-temprature heat capacity and ac and dc magnetic properties of (Dy 0.5 Er 0.5 )Al 2 have been studied as a function of magnetic fields up to ∼10 T. The magnetocaloric effect in (Dy 0.5 Er 0.5 )Al 2 is 30% larger than that of the prototype material, GdPd. Magnetic measurements show that there is no measurable magnetic hysteresis above ∼17 K. These results suggest that (Dy 0.5 Er 0.5 )Al 2 would be a significantly better magnetic refrigerant than GdPd

Europium substitution effects on structural, magnetic and magnetocaloric properties in La0.5Ca0.5MnO3

Directory of Open Access Journals (Sweden)

Boujelben W.

2012-06-01

Full Text Available We have investigated structural, magnetic and magnetocaloric properties of polycrystalline samples La0.5-xEuxCa0.5MnO3 (x=0 and 0.1. Rietveld refinement of the X-ray diffraction patterns show that our samples are single phase and crystallize in the orthorhombic structure with Pnma space group. Magnetization measurements versus temperature at a magnetic applied field of 500 Oe indicate that La0.4Eu0.1Ca0.5MnO3 sample exhibits a paramagnetic to ferromagnetic transition with decreasing temperature. Magnetic measurements reveal strong magnetocaloric effect in the vicinity of the Curie temperature TC. The parent compound shows a negative magnetic entropy change of ∆SM=−1.13Jkg−1K−1 at 220K and a positive magnetocaloric effects ∆SM=1Jkg−1K−1 at 150K under a magnetic applied field of 2T. La0.4Eu0.1Ca0.5MnO3 exhibits a maximum value of magnetic entropy change ∆SM=−1.15Jkg−1K−1 at 130K under an applied field of 2T and a large relative cooling power RCP with a maximum value of 72 J/kg.

Anisotropy of the magnetocaloric effect in DyNiAl

Czech Academy of Sciences Publication Activity Database

Kaštil, J.; Javorský, P.; Andreev, Alexander V.

2009-01-01

Roč. 321, č. 15 (2009), s. 2318-2321 ISSN 0304-8853 Institutional research plan: CEZ:AV0Z10100520 Keywords : magnetocaloric effec * DyNiAl * magnetism * anisotropy Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.204, year: 2009

Magnetic properties and low-temperature large magnetocaloric effect in the antiferromagnetic HoCu{sub 0.33}Ge{sub 2} and ErCu{sub 0.25}Ge{sub 2} compounds

Energy Technology Data Exchange (ETDEWEB)

Gao, R.L. [School of Metallurgy and Materials Engineering, Chongqing University of Science and Technology, Chongqing 401331 (China); Xu, Z.Y., E-mail: zhyxu@nim.ac.cn [National Institute of Metrology, Beijing 100029 (China); Wang, L.C. [State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Dong, Q.Y.; Zhang, Y. [Department of Physics, Capital Normal University, Beijing 100048 (China); Liu, F.H. [National Space Science Center, Beijing 100190 (China); Mo, Z.J. [School of material Science and Engineering, Hebei University of Technology, Tianjin 300401 (China); Niu, E. [State Key Laboratory for Magnetism, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Fu, C.L.; Cai, W.; Chen, G.; Deng, X.L. [School of Metallurgy and Materials Engineering, Chongqing University of Science and Technology, Chongqing 401331 (China)

2015-05-15

Highlights: • Antiferromagnetic material RCu{sub x}Ge{sub 2} of high purity was prepared. • Large MCE as −10.2 J/kg K and −10.5 J/kg K for RCu{sub x}Ge{sub 2} (Ho, Er) was obtained for field change of 0–50 kOe. • The RCu{sub x}Ge{sub 2} compounds with variable x had different transition temperature which made them suitable for ‘table-like’ magnetocaloric refrigerant. - Abstract: Magnetic properties and magnetocaloric effect (MCE) of HoCu{sub 0.33}Ge{sub 2} and ErCu{sub 0.25}Ge{sub 2} compounds have been investigated. The compounds were determined to be antiferromagnetic with the Néel temperatures T{sub N} = 9 K and 3.9 K, respectively. The critical transition magnetic fields for the metamagnetic transition from antiferromagnetic to ferromagnetic state below T{sub N} were determined to be 10 kOe for HoCu{sub 0.33}Ge{sub 2} at 5 K and 6 kOe for ErCu{sub 0.25}Ge{sub 2} at 2 K. Large MCE with the maximal values of magnetic entropy changes (ΔS{sub M}) as −10.2 J/kg K at 10.5 K were found in HoCu{sub 0.33}Ge{sub 2} for field changes of 0–70 kOe and −10.5 J/kg K at 5.5 K in ErCu{sub 0.25}Ge{sub 2} for field changes of 0–50 kOe, respectively. The large ΔS{sub M} around T{sub N} as well as no hysteresis loss made RCu{sub x}Ge{sub 2} competitive candidates as low temperature magnetic refrigerant.

Direct and indirect measurement of the magnetocaloric effect in bulk and nanostructured Ni-Mn-In Heusler alloy

Science.gov (United States)

Ghahremani, Mohammadreza; Aslani, Amir; Hosseinnia, Marjan; Bennett, Lawrence H.; Della Torre, Edward

2018-05-01

A systematic study of the magnetocaloric effect of a Ni51Mn33.4In15.6 Heusler alloy converted to nanoparticles via high energy ball-milling technique in the temperature range of 270 to 310 K has been performed. The properties of the particles were characterized by x-ray diffraction, electron microscopy, and magnetometer techniques. Isothermal magnetic field variation of magnetization exhibits field hysteresis in bulk Ni51Mn33.4In15.6 alloy across the martensitic transition which significantly lessened in the nanoparticles. The magnetocaloric effects of the bulk and nanoparticle samples were measured both with direct method, through our state of the art direct test bed apparatus with controllability over the applied fields and temperatures, as well as an indirect method through Maxwell and thermodynamic equations. In direct measurements, nanoparticle sample's critical temperature decreased by 6 K, but its magnetocaloric effect enhanced by 17% over the bulk counterpart. Additionally, when comparing the direct and indirect magnetocaloric curves, the direct method showed 14% less adiabatic temperature change in the bulk and 5% less adiabatic temperature change in the nanostructured sample.

Study of Magnetocaloric Cooling for Thermal Management

Science.gov (United States)

2012-11-12

The AMR bed, made of stainless steel 304, encloses the magnetocaloric working substance. Each part of the refrigerator is controlled by the...prototype is composed of magnetic field, hydraulic circuit, stainless steel AMR bed and control system. There are various sensors for measuring...DSC and VSM results show that the martensitic transition temperatures of Ni-Co-Mn-Sn decreased with increasing Co content. Co substitution resulted in

Magnetocaloric effect and critical behavior in melt-extracted Gd{sub 60}Co{sub 15}Al{sub 25} microwires

Energy Technology Data Exchange (ETDEWEB)

Xing, Dawei; Jiang, Sida; Chen, Dongming; Liu, Yanfen; Sun, Jianfei [School of Materials Science and Engineering, Harbin Institute of Technology (China); Shen, Hongxian [School of Materials Science and Engineering, Harbin Institute of Technology (China); Institute of Materials and Department of Physics, University of South Florida, Tampa, FL (United States); Liu, Jingshun [School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot (China); Phan, Manh-Huong [Institute of Materials and Department of Physics, University of South Florida, Tampa, FL (United States); Wang, Huan; Qin, Faxiang [Institute for Composites Science and Innovation (InCSI), College of Materials Science and Engineering, Zhejiang University, Hangzhou (China)

2015-09-15

High-quality Gd{sub 60}Co{sub 15}Al{sub 25} microwires with an average diameter of 40 μm were successfully fabricated by the melt-extraction method. The as-cast microwires undergo a second-order paramagnetic to ferromagnetic (PM-FM) transition at ∝100 K. Large values of the magnetic entropy change (-ΔS{sub M} ∝9.73 J kg{sup -1} K{sup -1}) and the refrigerant capacity (RC ∝732 J kg{sup -1}) are achieved for a field change of 5 T. A careful analysis of critical exponents near the PM-FM transition indicates the significant effects of structural disorder on the long-range ferromagnetic interaction and the magnetocaloric response of the microwires. The excellent magnetocaloric properties make the Gd{sub 60}Co{sub 15}Al{sub 25} microwires very promising for use in magnetic refrigerators operating in the liquid nitrogen temperature range. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Nonuniversal scaling of the magnetocaloric effect as an insight into spin-lattice interactions in manganites

DEFF Research Database (Denmark)

Smith, Anders; Nielsen, Kaspar Kirstein; Neves Bez, Henrique

2016-01-01

is not given uniquely by the critical exponents of the ferromagnetic-paramagnetic phase transition, i.e., the scaling is nonuniversal. A theoretical description based on the Bean-Rodbell model and taking into account compositional inhomogeneities is shown to be able to account for the observed field dependence....... In this way the determination of the nonuniversal field dependence of the magnetocaloric effect close to a phase transition can be used as a method to gain insight into the strength of the spin-lattice interactions of magnetic materials. The approach is shown also to be applicable to first-order transitions.......We measure the magnetocaloric effect of the manganite series La0.67Ca0.33-xSrxMnO3 by determining the isothermal entropy change upon magnetization, using variable-field calorimetry. The results demonstrate that the field dependence of the magnetocaloric effect close to the critical temperature...

Heat capacity and magnetocaloric effect in polycrystalline Gd 1-xSm xMn 2Si 2

Science.gov (United States)

Kumar, Pramod; Singh, Niraj K.; Suresh, K. G.; Nigam, A. K.; Malik, S. K.

2007-12-01

We report the magnetocaloric effect in terms of isothermal magnetic entropy change as well as adiabatic temperature change, calculated using the heat capacity data. Using the zero-field heat capacity data, the magnetic contribution to the heat capacity has been estimated. The variations in the magnetocaloric behavior have been explained on the basis of the magnetic structure of these compounds. The refrigerant capacities have also been calculated for these compounds.

Magnetocaloric effect, thermal conductivity, and magnetostriction of epoxy-bonded La(Fe0.88Si0.12)13 hydrides

Science.gov (United States)

Matsumoto, K.; Murayama, D.; Takeshita, M.; Ura, Y.; Abe, S.; Numazawa, T.; Takata, H.; Matsumoto, Y.; Kuriiwa, T.

2017-09-01

Magnetic materials with large magnetocaloric effect are significantly important for magnetic refrigeration. La(Fe0.88Si0.12)13 compounds are one of the promising magnetocaloric materials that have a first order magnetic phase transition. Transition temperature of hydrogenated La(Fe0.88Si0.12)13 increased up to room temperature region while keeping metamagnetic transition properties. From view point of practical usage, bonded composite are very attractive and their properties are important. We made epoxy bonded La(Fe0.88Si0.12)13 hydrides. Magnetocaloric effect was studied by measuring specific heat, magnetization, and temperature change in adiabatic demagnetization. The composite had about 20% smaller entropy change from the hydrogenated La(Fe0.88Si0.12)13 powder in 2 T. Thermal conductivity of the composite was several times smaller than La(Fe,Si)13. The small thermal conductivity was explained due to the small thermal conductivity of epoxy. Thermal conductivity was observed to be insensitive to magnetic field in 2 T. Thermal expansion and magnetostriction of the composite material were measured. The composite expanded about 0.25% when it entered into ferromagnetic phase. Magnetostriction of the composite in ferromagnetic phase was about 0.2% in 5 T and much larger than that in paramagnetic phase. The composite didn’t break after about 100 times magnetic field changes in adiabatic demagnetization experiment even though it has magnetostriction.

Quantitative feasibility study of magnetocaloric energy conversion utilizing industrial waste heat

International Nuclear Information System (INIS)

Vuarnoz, D.; Kitanovski, A.; Gonin, C.; Borgeaud, Y.; Delessert, M.; Meinen, M.; Egolf, P.W.

2012-01-01

Highlights: ► We model magnetic energy conversion machine for the use of industrial waste heat. ► Efficiencies and masses of the system are evaluated by a numerical model. ► Excellent potential of profitability is expected with large low-exergy heat sources. -- Abstract: The main objective of this theoretical study was to investigate under which conditions a magnetic energy conversion device (MECD) – utilizing industrial waste heat – is economically feasible. Furthermore, it was evaluated if magnetic energy conversion (MCE) has the potential of being a serious concurrent to already existing conventional energy conversion technologies. Up-today the availability of magnetocaloric materials with a high Curie temperature and a high magnetocaloric effect is rather limited. Therefore, this study was mainly focused on applications with heat sources of low to medium temperature levels. Magnetic energy conversion machines, containing permanent magnets, are numerically investigated for operation conditions with different temperature levels, defined by industrial waste heat sources and environmental heat sinks, different magnetic field intensities and different frequencies of operation (number of thermodynamic cycles per unit of time). Theoretical modeling and numerical simulations were performed in order to determine thermodynamic efficiencies and the exergy efficiencies as function of different operation conditions. From extracted data of our numerical results, approximate values of the total mass and total volume of magnetic energy conversion machines could be determined. These important results are presented dependent on the produced electric power. An economic feasibility study supplements the scientific study. It shows an excellent potential of profitability for certain machines. The most important result of this article is that the magnetic energy conversion technology can be economically and technically competitive to or even beat conventional energy

Magnetic refrigeration at room temperature - from magnetocaloric materials to a prototype

DEFF Research Database (Denmark)

Kuhn, Luise Theil; Pryds, Nini; Bahl, Christian Robert Haffenden

2011-01-01

Based on the magnetocaloric effect, magnetic refrigeration at room temperature has for the past decade been a promising, environmentally friendly new energy technology predicted to have a significantly higher efficiency than the present conventional methods. However, so far only a few prototype...... refrigeration machines have been presented worldwide and there are still many scientific and technological challenges to be overcome. We report here on the MagCool project, which spans all the way from basic materials studies to the construction of a prototype. Emphasis has been on ceramic magnetocaloric...... materials, their shaping and graded composition for technological use. Modelling the performance of a permanent magnet with optimum use of the flux and relatively low weight, and designing and constructing a prototype continuous magnetic refrigeration device have also been major tasks in the project...

Magnetic refrigeration at room temperature - from magnetocaloric materials to a prototype

International Nuclear Information System (INIS)

Kuhn, L Theil; Pryds, N; Bahl, C R H; Smith, A

2011-01-01

Based on the magnetocaloric effect, magnetic refrigeration at room temperature has for the past decade been a promising, environmentally friendly new energy technology predicted to have a significantly higher efficiency than the present conventional methods. However, so far only a few prototype refrigeration machines have been presented worldwide and there are still many scientific and technological challenges to be overcome. We report here on the MagCool project, which spans all the way from basic materials studies to the construction of a prototype. Emphasis has been on ceramic magnetocaloric materials, their shaping and graded composition for technological use. Modelling the performance of a permanent magnet with optimum use of the flux and relatively low weight, and designing and constructing a prototype continuous magnetic refrigeration device have also been major tasks in the project.

MnFe(PGe) compounds: Preparation, structural evolution, and magnetocaloric effects

International Nuclear Information System (INIS)

Yue Ming; Zhang Hong-Guo; Zhang Jiu-Xing; Liu Dan-Min

2015-01-01

The interdependences of preparation conditions, magnetic and crystal structures, and magnetocaloric effects (MCE) of the MnFePGe-based compounds are reviewed. Based upon those findings, a new method for the evaluation of the MCE in these compounds, based on differential scanning calorimetry (DSC), is proposed. The MnFePGe-based compounds are a group of magnetic refrigerants with giant magnetocaloric effect (GMCE), and as such, have drawn tremendous attention, especially due to their many advantages for practical applications. Structural evolution and phase transformation in the compounds as functions of temperature, pressure, and magnetic field are reported. Influences of preparation conditions upon the homogeneity of the compounds’ chemical composition and microstructure, both of which play a key role in the MCE and thermal hysteresis of the compounds, are introduced. Lastly, the origin of the “virgin effect” in the MnFePGe-based compounds is discussed. (paper)

Measuring the effect of demagnetization in stacks of gadolinium plates using the magnetocaloric effect

International Nuclear Information System (INIS)

Lipso, K.W.; Nielsen, K.K.; Christensen, D.V.; Bahl, C.R.H.; Engelbrecht, K.; Theil Kuhn, L.; Smith, A.

2011-01-01

The effect of demagnetization in a stack of gadolinium plates is determined experimentally by using spatially resolved measurements of the adiabatic temperature change due to the magnetocaloric effect. The number of plates in the stack, the spacing between them and the position of the plate on which the temperature is measured are varied. The orientation of the magnetic field is also varied. The measurements are compared to a magnetostatic model previously described. The results show that the magnetocaloric effect, due to the change in the internal field, is sensitive to the stack configuration and the orientation of the applied field. This may have significant implications for the construction of a magnetic cooling device. - Highlights: → The magnetocaloric effect is used as an indirect measure of the internal magnetic field. → To our knowledge nobody has published experimental determination of demagnetizing field in stack configurations of plates of magnetic material. → We present good agreement between the experimental results and an established numerical model. → This serves to show that the model may be used further to predict, e.g., optimal configurations.

Theoretical investigations on the magnetocaloric and barocaloric effects in Tb{sub y}Gd{sub (1−y)}Al{sub 2} series

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, P.O.; Alho, B.P.; Alvarenga, T.S.T.; Nóbrega, E.P. [Instituto de Física, Universidade do Estado do Rio de Janeiro – UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil); Carvalho, A.Magnus G. [Instituto de Ciência e Tecnologia, Universidade Federal de São Paulo – UNIFESP, 12231-280 São José dos Campos, SP (Brazil); Instituto Nacional de Metrologia, Qualidade e Tecnologia – INMETRO, 25250-020 Duque de Caxias, RJ (Brazil); Sousa, V.S.R. de; Caldas, A.; Oliveira, N.A. de [Instituto de Física, Universidade do Estado do Rio de Janeiro – UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil); Ranke, P.J. von, E-mail: von.ranke@uol.com.br [Instituto de Física, Universidade do Estado do Rio de Janeiro – UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil)

2013-06-25

Highlights: ► Anisotropic magnetocaloric effect in in Tb{sub 0.4}Gd{sub 0.6}Al{sub 2}. ► Prediction of barocaloric effect in Tb{sub 0.4}Gd{sub 0.6}Al{sub 2}. ►An optimal hybrid magnetocaloric material using Tb{sub y}Gd{sub (1-y)}Al{sub 2} compounds. -- Abstract: We report the calculations on the magnetocaloric and barocaloric effects in ferromagnetic series Tb{sub y}Gd{sub (1−y)}Al{sub 2}. Our model includes the crystalline electrical field interaction, exchange interactions among Tb–Tb, Gd–Gd and Tb–Gd magnetic ions and the Zeeman effect for an anisotropic system. The lattice and electronic entropies were included in adiabatic processes. The magnetocaloric effect calculated for magnetic field changes along the easy magnetic direction 〈1 1 1〉 is in good agreement with the experimental data. Calculation along the hard magnetization direction 〈0 0 1〉 predicts anomalous magnetocaloric effect, which was ascribed to the spin reorientation processes. From the available experimental data of Curie temperature dependence on pressure, the exchange model parameters were scaled and the barocaloric effect was calculated.

Tuning the magnetocaloric response in half-Heusler/Heusler MnNi1 +xSb solid solutions

Science.gov (United States)

Levin, Emily E.; Bocarsly, Joshua D.; Wyckoff, Kira E.; Pollock, Tresa M.; Seshadri, Ram

2017-12-01

Materials with a large magnetocaloric response are associated with a temperature change upon the application of a magnetic field and are of interest for applications in magnetic refrigeration and thermomagnetic power generation. The usual metric of this response is the gravimetric isothermal entropy change Δ SM . The use of a simple proxy for the Δ SM that is based on density functional theory (DFT) calculations of the magnetic electronic structure suggests that half-Heusler MnNiSb should be a better magnetocaloric than the corresponding Heusler compound MnNi2Sb . Guided by this observation, we present a study of MnNi1 +xSb (x =0 , 0.25, 0.5, 0.75, and 1.0) to evaluate relevant structural and magnetic properties. DFT stability calculations suggest that the addition of Ni takes place at a symmetrically distinct Ni site in the half-Heusler structure and support the observation using synchrotron x-ray diffraction of a homogeneous solid solution between the half-Heusler and Heusler end members. There is a maximum in the saturation magnetization at x =0.5 and the Curie temperature systematically decreases with increasing x . Δ SM for a maximum magnetic field change of Δ H =5 T monotonically decreases in magnitude from -2.93 J kg-1K-1 in the half-Heusler to -1.35 J kg-1K-1 in the Heusler compound. The concurrent broadening of the magnetic transition results in a maximum in the refrigerant capacity at x =0.75 . The Curie temperature of this system is highly tunable between 350 K and 750 K, making it ideal for low grade waste heat recovery via thermomagnetic power generation. The increase in Δ SM with decreasing x may be extendable to other MnNi2Z Heusler systems that are currently under investigation for use in magnetocaloric refrigeration applications.

Experimental results for a magnetic refrigerator using three different types of magnetocaloric material regenerators

DEFF Research Database (Denmark)

Engelbrecht, Kurt; Bahl, Christian Robert Haffenden; Nielsen, Kaspar Kirstein

2011-01-01

in an experimental device. This paper compares the performance of three magnetocaloric material candidates for AMRs, La(Fe,Co,Si)13, (La,Ca,Sr)MnO3 and Gd, in an experimental active magnetic regenerator with a parallel plate geometry. The performance of single-material regenerators of each magnetocaloric material...... family were compared. In an attempt to improve system performance, graded two-material regenerators were made from two different combinations of La(Fe,Co,Si)13 compounds having different magnetic transition temperatures. One combination of the La(Fe,Co,Si)13 materials yielded a higher performance, while...

A novel magnetic valve using room temperature magnetocaloric materials

DEFF Research Database (Denmark)

Eriksen, Dan; Bahl, Christian; Pryds, Nini

2012-01-01

changes. This is made possible by the strong temperature dependence of the magnetization close to the Curie temperature of the magnetocaloric materials. Different compositions of both La0.67(Ca,Sr)0.33MnO3 and La(Fe,Co,Si)13 have been considered for use in prototype valves. Based on measured magnetization...

The influence of non-magnetocaloric properties on the AMR performance

DEFF Research Database (Denmark)

Nielsen, Kaspar Kirstein; Bahl, Christian; Smith, Anders

2012-01-01

The performance of Active Magnetic Regenerators (AMR) does not depend solely on the magnetocaloric effect of their constituents. Rather, it depends on several additional parameters, including, magnetic field, geometry (hydraulic diameter, cross-sectional area, regenerator length etc.), thermal pr...... a strong dependence on the orientation of the applied field and the regenerator geometry. Finally, the flow maldistribution of non-uniform regenerator geometries is found to degrade the AMR performance even at minor deviations from perfectly homogeneous regenerator matrices.......The performance of Active Magnetic Regenerators (AMR) does not depend solely on the magnetocaloric effect of their constituents. Rather, it depends on several additional parameters, including, magnetic field, geometry (hydraulic diameter, cross-sectional area, regenerator length etc.), thermal...... properties (conductivity, specific heat and mass density) and operating parameters (utilization, frequency, number of transfer units etc.). In this paper we focus on the influence of three parameters on regenerator performance: 1) Solid thermal conductivity, 2) magnetostatic demagnetization and 3) flow...

Magnetocaloric Properties of Fe-Ni-Cr Nanoparticles for Active Cooling

Science.gov (United States)

Chaudhary, V.; Ramanujan, R. V.

2016-10-01

Low cost, earth abundant, rare earth free magnetocaloric nanoparticles have attracted an enormous amount of attention for green, energy efficient, active near room temperature thermal management. Hence, we investigated the magnetocaloric properties of transition metal based (Fe70Ni30)100-xCrx (x = 1, 3, 5, 6 and 7) nanoparticles. The influence of Cr additions on the Curie temperature (TC) was studied. Only 5% of Cr can reduce the TC from ~438 K to 258 K. These alloys exhibit broad entropy v/s temperature curves, which is useful to enhance relative cooling power (RCP). For a field change of 5 T, the RCP for (Fe70Ni30)99Cr1 nanoparticles was found to be 548 J-kg-1. Tunable TCin broad range, good RCP, low cost, high corrosion resistance and earth abundance make these nanoparticles suitable for low-grade waste heat recovery as well as near room temperature active cooling applications.

Magnetocaloric effect and other low-temperature properties of Pr2Pt2 In

Science.gov (United States)

Mboukam, J. J.; Sondezi, B. M.; Tchokonté, M. B. Tchoula; Bashir, A. K. H.; Strydom, A. M.; Britz, D.; Kaczorowski, D.

2018-05-01

We report on X-ray diffraction, electrical transport, heat capacity and magnetocaloric effect measurements of a polycrystalline sample of Pr2Pt2 In . The compound forms in the tetragonal Mo2FeB2 type structure and orders ferromagnetically at TC=9 K. In the ordered state, its thermodynamic and electrical transport properties are dominated by magnon contributions with an energy gap of about 8 K in the spin-wave spectrum. The magnitude of magnetocaloric effect is similar to the values reported for most rare-earth based intermetallics. Characteristic behavior of the isothermal magnetic entropy change maximum points to a second-order character of the ferromagnetic phase transition in the compound studied.

Thermomagnetic and magnetocaloric properties of metamagnetic Ni-Mn-In-Co Heusler alloy in magnetic fields up to 140 kOe

Directory of Open Access Journals (Sweden)

Kamantsev Alexander

2014-07-01

Full Text Available High cooling power of magnetocaloric refrigeration can be achieved only at large amounts of heat, which can be transferred in one cycle from cold end hot end at quasi-isothermal conditions. The simple and robust experimental method of direct measuring of the transferred heat of materials with magnetocaloric effect (MCE in thermal contact with massive copper block with definite heat capacity in quasi-isothermal regime was proposed. The vacuum calorimeter for the specific transferred heat ΔQ and adiabatic temperature change ΔT measurements of MCE materials in the fields of Bitter coil magnet up to H = 140 kOe was designed and tested on samples of Ni43Mn37.9In12.1Co7 Heusler alloy with inverse MCE in the vicinity of meta-magnetostructural phase transition (PT. It was found, that the magnetic field H = 80 kOe produces complete PT from martensite to austenite with ΔQ = - 1600 J/kg at initial temperature 273 K.

Magnetic and magnetocaloric properties of Ni-Mn-Cr-Sn Heusler alloys under the effects of hydrostatic pressure

Science.gov (United States)

Pandey, Sudip; Us Saleheen, Ahmad; Quetz, Abdiel; Chen, Jing-Han; Aryal, Anil; Dubenko, Igor; Stadler, Shane; Ali, Naushad

2018-05-01

The magnetic, thermal, and magnetocaloric properties of Ni45Mn43CrSn11 Heusler alloy have been investigated using differential scanning calorimetry and magnetization with hydrostatic pressure measurements. A shift in the martensitic transition temperature (TM) to higher temperatures was observed with the application of pressure. The application of pressure stabilizes the martensitic state and demonstrated that pressure can be a parameter used to control and tune the martensitic transition temperature (the temperature where the largest magnetocaloric effect is observed). The magnetic entropy change significantly decreases from 33 J/kg K to 16 J/kg K under the application of a hydrostatic pressure of 0.95 GPa. The critical field of the direct metamagnetic transition increases, whereas the initial susceptibility (dM/dH) in the low magnetic field region drastically decreases with increasing pressure. The relevant parameters that affect the magnetocaloric properties are discussed.

Gd{sub 90}Co{sub 2.5}Fe{sub 7.5} alloy displaying enhanced magnetocaloric properties

Energy Technology Data Exchange (ETDEWEB)

Provenzano, V., E-mail: virgil12@nist.gov [Materials Science and Engineering Division, NIST, Gaithersburg, MD 20899-8552 (United States); Shull, R.D., E-mail: robert.shull@nist.gov [Materials Science and Engineering Division, NIST, Gaithersburg, MD 20899-8552 (United States); Kletetschka, G., E-mail: kletetschka@gmail.com [Faculty of Science, Charles University, Prague 12843 (Czech Republic); Institute of Geology, Academy of Science of the Czech Republic, v.v.i., Prague 16500 (Czech Republic); Stutzman, P.E., E-mail: paul.stutzman@nist.gov [Materials and Structural Systems Division, NIST, Gaithersburg, MD 20899-861 (United States)

2015-02-15

Highlights: • The Gd{sub 90}Co{sub 2.5}Fe{sub 7.5} alloy displays superior magnetocaloric properties than Gd. • Alloy’s superior properties at relatively low field values: 400, 800 kA/m (0.5, 1 T). • We proposed two possible mechanisms for the Gd-based alloy enhanced properties. • We indicated a pathway for further improving the alloy magnetocaloric properties. - Abstract: We report on the discovery of a new Gd{sub 90}Co{sub 2.5}Fe{sub 7.5} alloy exhibiting superior magnetocaloric properties compared to those of gadolinium. We present magnetically-derived entropy change, ΔS{sub M}, computed from magnetic data, and thermally-derived temperature change, ΔT{sub ad}, obtained from direct thermal measurements together with their respective MCE peaks for the alloy and gadolinium. The MCE peaks of the alloy are taller and broader than the corresponding MCE peaks of gadolinium. Correspondingly, the refrigeration capacity (RC) values of the alloy computed from magnetic and thermal MCEs for field changes, ΔH, of 400 kA/m (0.5 T) and 800 kA/m (1 T) are about 20% larger than those of gadolinium. Two possible mechanisms are proposed to account for the improved magnetocaloric properties of gadolinium alloyed with small amounts of Co and Fe, thereby pointing out a different methodology to use in the search for improved low field magnetic refrigerants.

Magnetocaloric properties of Gd in fields up to 14 T

Energy Technology Data Exchange (ETDEWEB)

Koshkid' ko, Yu.S. [International Laboratory of High Magnetic Fields and Low Temperatures, PAS, 53-421 Wroclaw (Poland); Ćwik, J., E-mail: jacek.cwik@ml.pan.wroc.pl [International Laboratory of High Magnetic Fields and Low Temperatures, PAS, 53-421 Wroclaw (Poland); Ivanova, T.I.; Nikitin, S.A. [International Laboratory of High Magnetic Fields and Low Temperatures, PAS, 53-421 Wroclaw (Poland); Lomonosov Moscow State University, Faculty of Physics, 119991 Moscow (Russian Federation); Miller, M. [International Laboratory of High Magnetic Fields and Low Temperatures, PAS, 53-421 Wroclaw (Poland); Rogacki, K. [International Laboratory of High Magnetic Fields and Low Temperatures, PAS, 53-421 Wroclaw (Poland); Institute of Low Temperatures and Structure Research, PAS, 50-950 Wroclaw (Poland)

2017-07-01

Highlights: • MCE of Gd in fields up to 14 T. • Extraction. • MCE described in terms of the Landau theory. - Abstract: The magnetocaloric effect (MCE) of polycrystalline gadolinium was studied in high steady magnetic fields up to 14 T by direct measurements of the adiabatic temperature change (ΔT) using an “extraction method”. Large MCE was observed at the ferromagnetic phase transition resulting in ΔT of 19.5 K at a field change of 14 T. The direct measurements of MCE were performed using the measuring system designed and constructed by the authors. It was shown that near the Curie temperature, the magnetic field dependence of the adiabatic temperature change is far from saturation even in a 14 T field and is adequately described by the thermodynamic Landau theory for magnetic second-order phase transitions.

Second Law Violation By Magneto-Caloric Effect Adiabatic Phase Transition of Type I Superconductive Particles

Directory of Open Access Journals (Sweden)

Peter Keefe

2004-03-01

Full Text Available Abstract: The nature of the thermodynamic behavior of Type I superconductor particles, having a cross section less than the Ginzburg-Landau temperature dependent coherence length is discussed for magnetic field induced adiabatic phase transitions from the superconductive state to the normal state. Argument is advanced supporting the view that when the adiabatic magneto-caloric process is applied to particles, the phase transition is characterized by a decrease in entropy in violation of traditional formulations of the Second Law, evidenced by attainment of a final process temperature below that which would result from an adiabatic magneto-caloric process applied to bulk dimensioned specimens.

Magnetocaloric effect of polycrystalline Sm0.5Ca0.5MnO3 compound: Investigation of low temperature magnetic state

Science.gov (United States)

Das, Kalipada; Banu, Nasrin; Das, I.; Dev, B. N.

2018-06-01

An attempt has been made to probe low temperature magnetic state of the polycrystalline Sm0.5Ca0.5MnO3 compound via magnetization and magnetocaloric studies. In the context of the earlier debatable reports on the above mentioned compound between the existence of glassy magnetic state and small ferromagnetic domains from the 'ac' susceptibility measurements, our experimental observation from magnetocaloric effect study clearly indicates the existence of ferromagnetic droplets along with certain amount of superparamagnetic component at low temperature (magnetization (even at H = 0.01 T) data do not exhibit the spin freezing nature at the low temperature which is almost a generic tendency of glassy magnetic state. Our study also highlights the competence of magnetocaloric effect as a tool to distinguish between different magnetic states of a compound.

Magnetocaloric Effect and Thermoelectric Cooling - A Synergistic Cooling Technology

Science.gov (United States)

2018-01-16

Thermoelectric Cooling - A Synergistic Cooling Technology Sb. GRANT NUMBER N00173-14-1-G016 Sc. PROGRAM ELEMENT NUMBER 82-2020-17 6. AUTHOR(S) 5d...Magnetocaloric Effect and Thermoelectric Cooling - A Synergistic Cooling Technology NRL Grant N00173-14-l-G016 CODE 8200: Spacecraft Engineering Department...82-11-0 1: Space and Space Systems Technology General Engineering & Research, L.L.C. Technical & Administrative point of contact: Dr. Robin

Investigations in MnAs{sub 1−x}Sb{sub x}: Experimental validation of a new magnetocaloric composite

Energy Technology Data Exchange (ETDEWEB)

Campos, A. de, E-mail: acampos@icte.uftm.edu.br [Instituto de Ciências Tecnológicas e Exatas, Universidade Federal do Triângulo Mineiro (UFTM), 38066-200 Uberaba (Brazil); Luz, M.S. da; Campos, Adriana de [Instituto de Ciências Tecnológicas e Exatas, Universidade Federal do Triângulo Mineiro (UFTM), 38066-200 Uberaba (Brazil); Coelho, A.A.; Cardoso, L.P. [Instituto deFísica Gleb Wataghin, Universidade Estadual de Campinas (UNICAMP), 13083-970 Campinas (Brazil); Santos, A.O. dos [Centro de Ciências Sociais, Saúde e Tecnologia, Universidade Federal do Maranhão – (UFMA), 65900-000 Imperatriz, MA (Brazil); Gama, S. [Departamento de Ciências Exatas e da Terra, Universidade Federal de São Paulo (UNIFESP), Diadema, 09971-270 SP (Brazil)

2015-01-15

An overview of the magnetocaloric properties of the MnAs{sub 1−x}Sb{sub x} is presented. The temperature dependence of the isothermal magnetic entropy, ΔS{sub mag}, and the refrigerant capacity, RC, have been investigated theoretically and experimentally in a composite based on second order MnAs{sub 1−x}Sb{sub x} phases. This work demonstrates the outstanding agreement between the experimental results and the continuous curves predicted by numerical calculations, indicating that this approach can be used to design magnetic refrigerant materials with enhanced magnetocaloric response in magnetic refrigerator performing an Ericsson cycle near room temperature. - Highlights: • This is the first report showing the magnetocaloric properties of the MnAs{sub 1−x}Sb{sub x} composite. • This work demonstrates a good agreement between experimental and the predicted by numerical calculations. The results indicating that this approach can be used to design magnetic refrigerant materials.

Measurement of pressure effects on the magnetic and the magnetocaloric properties of the intermetallic compounds DyCo2 and Er(Co1-xSix)2

International Nuclear Information System (INIS)

Singh, Niraj K; Kumar, Pramod; Suresh, K G; Nigam, A K; Coelho, A A; Gama, S

2007-01-01

The effect of external pressure on the magnetic properties and magnetocaloric effect of polycrystalline compounds DyCo 2 and Er(Co 1-x Si x ) 2 (x = 0,0.025 and 0.05) has been studied. The ordering temperatures of both the parent and the Si-substituted compounds are found to decrease with pressure. In all the compounds, the critical field for metamagnetic transition increases with pressure. It is seen that the magnetocaloric effect in the parent compounds is almost insensitive to pressure, while there is considerable enhancement in the case of Si-substituted compounds. Spin fluctuations arising from the magnetovolume effect play a crucial role in determining the pressure dependence of the magnetocaloric effect in these compounds. The variation of the magnetocaloric effect is explained on the basis of the Landau theory of magnetic phase transitions

Magnetocaloric effects in MnFeP1-x As x -based compounds

International Nuclear Information System (INIS)

Brueck, E.; Ilyn, M.; Tishin, A.M.; Tegus, O.

2005-01-01

Here we present the results of an investigation of some magnetic and thermal properties of the compounds MnFeP 0.45 As 0.55 , MnFeP 0.47 As 0.53 , and Mn 1.1 Fe 0.9 P 0.47 As 0.53 which can be regarded as possible magnetic refrigerants for room temperature applications. Magnetization measurements are performed in the temperature range 250-330 K, in magnetic fields up to 5 T. The coexistence of the magnetic and structural first-order phase transitions is revealed in all three samples, suggesting its key role in the large values observed for the magnetocaloric effect. The adiabatic temperature change measured directly was up to 4.0, 3.4, and 4.2 K for a magnetic field change of 1.45 T

Magnetocaloric effect in magnetothermally-responsive nanocarriers for hyperthermia-triggered drug release

International Nuclear Information System (INIS)

Li Jianbo; Qu Yang; Ren Jie; Yuan Weizhong; Shi Donglu

2012-01-01

The magnetocaloric effects and lower critical solution temperature (LCST) were investigated in a magnetothermally-responsive nanocarrier for magnetothermal drug release under alternating magnetic field (AMF). The Mn 0.2 Zn 0.8 Fe 2 O 4 nanoparticles with low T c were dispersed in a polymeric matrix consisting of N-Isopropyl acrylamide (NIPAAm) and N-hydroxymethyl acrylamide (HMAAm). The magnetocaloric effects and LCST of the nanocarriers were characterized by using high-resolution electron transmission microscopy, thermogravimetric analyses, and vibrating sample magnetometer. The maximum self-heating temperature of 42.9 °C was achieved by optimizing the Mn 0.2 Zn 0.8 Fe 2 O 4 concentration in the polymer matrix. By adjusting the NIPAAm to HMAAm ratio, the LCST was controlled at an ideal level of 40.1 °C for efficient thermosensitive drug delivery. Magnetothermally responsive drug release of Doxorubicin, an anticancer drug, was significantly enhanced by application of an external AMF on the nanocarriers. The cytotoxicity experimental results in vitro show good biocompatibility and efficient therapeutic effects in cancer treatment. (paper)

Effect of vanadium doping on structural, magnetic and magnetocaloric properties of La{sub 0.5}Ca{sub 0.5}MnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Mansouri, M., E-mail: mansourimoufida23@yahoo.fr [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Omrani, H. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Cheikhrouhou-Koubaa, W. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Centre de Recherche en Informatique, Multimédia et Traitement Numérique des Données, BP 275, Sakiet Ezzit, 3021 Sfax (Tunisia); Koubaa, M. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Madouri, A. [Laboratoire de Photonique et Nanostructure, LPN-CNRS, Route de Nozay, 91460 Marcoussis (France); Cheikhrouhou, A. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia)

2016-03-01

We report the effect of vanadium doping on structural, magnetic and magnetocaloric properties of La{sub 0.5}Ca{sub 0.5}Mn{sub 1−x}V{sub x}O{sub 3} (x=0.05; 0.1). Our samples were elaborated using the conventional solid state reaction method at high temperatures. X-Ray powder diffraction at room temperature indicates that our samples crystallize in the orthorhombic structure with Pbnm space group. Magnetic measurements reveal a paramagnetic-ferromagnetic transition with decreasing temperature. Magnetocaloric studies show that the maximum of the magnetic entropy change and the relative cooling power (RCP) are found to be 2.42 J Kg{sup −1} K{sup −1} and 162.75 J Kg{sup −1} for x=0.05 and 3.12 J Kg{sup −1} K{sup −1} and 221.31 J Kg{sup −1} for x=0.1 under a field change of 5 T. - Highlights: • The La{sub 0.5}Ca{sub 0.5}Mn{sub 1−x}V{sub x}O{sub 3}(x=0.05 and x=0.1) compounds were synthesized using conventional solid state reaction method. • T{sub C} increases with V content from 187 K for x=0.05 to 263 K for x=0.1 • Large magnetocaloric effect is reported based on second order phase transition. • Noticeable |∆S{sub M}| at 5 T field makes the system useful for magnetic refrigeration.

A study of the phase transition and magnetocaloric effect in multiferroic La{sub 2}MnNiO{sub 6} single crystals

Energy Technology Data Exchange (ETDEWEB)

Balli, M., E-mail: mohamed.balli@usherbrooke.ca; Jandl, S. [Regroupement québécois sur les matériaux de pointe, Département de physique, Université de Sherbrooke, Quebec J1K 2R1 (Canada); Fournier, P. [Regroupement québécois sur les matériaux de pointe, Département de physique, Université de Sherbrooke, Quebec J1K 2R1 (Canada); Canadian Institute for Advanced Research, Toronto, Ontario M5G 1Z8 (Canada); Gospodinov, M. M. [Institute of Solid State Physics, Bulgarian Academy of Science, Sofia 1184 (Bulgaria)

2014-05-07

Magnetic and magnetocaloric properties of single crystal double perovskite La{sub 2}MnNiO{sub 6} have been investigated in details. Its ordered phase with a high Curie temperature (T{sub C} = 280 K) exhibits a significant refrigerant capacity around room temperature. A model based on the mean field theory approximation has been used in order to quantify the magnetic and magnetocaloric properties in the ordered La{sub 2}MnNiO{sub 6}. The magnetization and entropy changes were satisfactorily simulated as a function of temperature and magnetic field. On the other hand, the presence of cationic disorder in La{sub 2}MnNiO{sub 6} phases allows to shift the Curie point to low temperature without a significant change in the magnetocaloric performance.

Magnetic properties and tunable magneto-caloric effect in La0.8Ce0.2Fe11.5-xCoxSi1.5C0.2 (x = 0.3, 0.5, and 0.7) compounds

Science.gov (United States)

Wu, Qiming; Wang, Xiangjie; Ding, Zan; Li, Lingwei

2018-05-01

The magnetic and magneto-caloric properties in the ternary elementals doped La0.8Ce0.2Fe11.5-xCoxSi1.5C0.2 (x = 0.3, 0.5, and 0.7) compounds were studied. With the increases of Co content x, the Curie temperature TC increases and the thermal hysteresis decreases. All the compounds undergo a second-order magnetic phase transition and exhibit a considerable reversible tunable magneto-caloric effect. The values of maximum magnetic entropy change (-ΔSMmax) and the Relative Cooling Power (RCP) are kept at same high level with different Co content. Under a magnetic field change of 0-5 T, the values of -ΔSMmax for La0.8Ce0.2Fe11.5-xCoxSi1.5C0.2 are 10.5, 10.7, and 9.8 J/kg K for x = 0.3, 0.5, and 0.7, respectively. The corresponding values of RCP are 267.1, 289.9, and 290.2 J/kg.

Magnetic structure and phase formation of magnetocaloric Mn-Fe-P-X compounds

NARCIS (Netherlands)

Ou, Z.Q.

2013-01-01

This thesis presents a study of the crystal and magnetic structure, the magnetocaloric effect and related physical properties in Mn-Fe-P-X compounds. The influences of boron addition in (Mn,Fe)2(P,As) compounds have been studied. It is found that boron atoms occupy interstitial sites within the

Magnetocaloric properties of distilled gadolinium: effects of structural inhomogeneity and hydrogen impurity

Czech Academy of Sciences Publication Activity Database

Burkhanov, G.S.; Kolchugina, N.B.; Tereshina, Evgeniya; Tereshina, I. S.; Politova, G.A.; Chzhan, V.B.; Badurski, D.; Chistyakov, O.D.; Paukov, M.; Drulis, H.; Havela, L.

2014-01-01

Roč. 104, č. 24 (2014), "242402-1"-"242402-5" ISSN 0003-6951 R&D Projects: GA ČR GAP204/12/0150 Institutional support: RVO:68378271 Keywords : high-purity rare- earth metals * gadolinium * magnetocaloric effect * hydrogenation * structural studies Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.302, year: 2014

Magnetocaloric effect in quantum spin-s chains

Directory of Open Access Journals (Sweden)

A. Honecker

2009-01-01

Full Text Available We compute the entropy of antiferromagnetic quantum spin-s chains in an external magnetic field using exact diagonalization and Quantum Monte Carlo simulations. The magnetocaloric effect, i. e., temperature variations during adiabatic field changes, can be derived from the isentropes. First, we focus on the example of the spin-s=1 chain and show that one can cool by closing the Haldane gap with a magnetic field. We then move to quantum spin-s chains and demonstrate linear scaling with s close to the saturation field. In passing, we propose a new method to compute many low-lying excited states using the Lanczos recursion.

Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons

Energy Technology Data Exchange (ETDEWEB)

Dey, Sushmita; Singh, Satnam; Roy, R.K.; Ghosh, M.; Mitra, A.; Panda, A.K., E-mail: akpanda@nmlindia.org

2016-01-01

The present investigation addresses the magnetocaloric behaviour in a series of Ni{sub 77−x}Mn{sub x}Ga{sub 23} (x=23, 24, 25, 27 and 29) rapidly solidified alloys prepared in the form of ribbons by melt spinning technique. The approach of the study is to identify the off-stoichiometric composition wherein room temperature magneto-structural transformation is achieved. The alloy chemistry was tailored through Mn incorporation for Ni such that the magnetic and structural transitions were at close proximity to achieve highest entropy value of ΔS equal to 8.51 J Kg{sup −1} K{sup −1} for #Mn{sub 24} ribbon measured at an applied field of 3 T. When such transitions are more staggered as in #Mn{sub 29} the entropy value of ribbon reduced to as low as 1.61 J Kg{sup −1} K{sup −1}. Near room temperature transformations in #Mn{sub 24} ribbon have been observed through calorimetric and thermomagnetic evaluation. Reverse martensitic transformation (martensite→autstenite) temperature indicates not only distinct change in the saturation flux density but also an inter-martensitic phase. Microstructural analysis of #Mn{sub 24} alloy ribbon revealed structural ordering with the existence of plate morphology evidenced for martensitic phase. - Highlights: • Magnetocaloric effect in a series of melt spun NiMnGa ribbon is addressed. • The alloy series revealed austenitic state as well as its presence with martensite. • The morphology of the ribbons has been shown and discussed through phase analysis. • Influence of magnetising field on entropy and relative cooling power is discussed. • Influence of intermartensitic state on magnetization plots have also been shown.

Properties of magnetocaloric materials with a distribution of Curie temperatures

DEFF Research Database (Denmark)

Bahl, Christian Robert Haffenden; Bjørk, Rasmus; Smith, Anders

2012-01-01

The magnetocaloric properties of inhomogeneous ferromagnets that contain distributions of Curie temperatures are considered as a function of the width of such a distribution. Assuming a normal distribution of the Curie temperature, the average adiabatic temperature change, ΔTad, the isothermal...... of the distribution, explaining the observed mismatch of peak temperatures reported in experiments. Also, the field dependence of ΔTad and Δs is found to depend on the width of the distribution....

Investigation on the structural, magnetic and magnetocaloric properties of nanocrystalline Pr-deficient Pr1-xSrxMnO3-δ manganites

Science.gov (United States)

Arun, B.; Athira, M.; Akshay, V. R.; Sudakshina, B.; Mutta, Geeta R.; Vasundhara, M.

2018-02-01

We have investigated the structural, magnetic and magnetocaloric properties of nanocrystalline Pr-deficient Pr1-xSrxMnO3-δ Perovskite manganites. Rietveld refinement of the X-ray powder diffraction patterns confirms that all the studied compounds have crystallized into an orthorhombic structure with Pbnm space group. Transmission electron microscopy analysis reveals nanocrystalline compounds with crystallite size less than 50 nm. The selected area electron diffraction patterns reveal the highly crystalline nature of the compounds and energy dispersive X-ray spectroscopic analysis shows that the obtained compositions are nearly identical with the nominal one. The oxygen stoichiometry is estimated by iodometric titration method and stoichiometric compositions are confirmed by X-ray Fluorescence Spectrometry analysis. A large bifurcation is observed in the ZFC/FC curves and Arrott plots not show a linear relation but have a convex curvature nature. The temperature dependence of inverse magnetic susceptibility at higher temperature confirms the existence of ferromagnetic clusters. The experimental results reveal that the reduction of crystallite size to nano metric scale in Pr-deficient manganites adversely influences structural, magnetic and magnetocaloric properties as compared to its bulk counterparts reported earlier.

Anisotropic and excellent magnetocaloric properties of La0.7Ca0.3MnO3 single crystal with anomalous magnetization

International Nuclear Information System (INIS)

Debnath, J.C.; Zeng, R.; Kim, J.H.; Chen, D.P.; Dou, S.X.

2012-01-01

Highlights: ► ΔS M shows a very large reversibility value at low field. ► The single crystal exhibits anisotropy in the MCE. ► La 0.7 Ca 0.3 MnO 3 is weakly itinerant ferromagnetic. ► No hysteresis loss is observed. - Abstract: Magnetic properties and the magnetocaloric effect (MCE) have been investigated in La 0.7 Ca 0.3 MnO 3 single crystal with applied field along both the ab-plane and the c-direction. Due to the magnetocrystalline anisotropy, the crystal exhibits anisotropy in the MCE. Upon application of a 5 T field, the magnetic entropy changes (ΔS M ), reaching values of 7.668 J/(kg K) and 6.412 J/(kg K) for both the ab-plane and the c-direction, respectively. A magnetic entropy change of 3.3 J/(kg K) was achieved for a magnetic field change of 1.5 T at the Curie temperature, T C = 245 K. Due to the absence of grains in the single crystal, the ΔS M distribution here is much more uniform than for gadolinium (Gd) and other polycrystalline manganites, which is desirable for an Ericsson-cycle magnetic refrigerator. For a field change of 5 T, the relative cooling power, RCP, reached 358.17 J/kg, while the maximum adiabatic temperature change of 5.33 K and a magnetoresistance (MR) ratio of 507.88% at T C were observed. We analysed the magnetization of La 0.7 Ca 0.3 MnO 3 single crystal at T C and estimated several parameters of spin fluctuation on the basis of a self-consistent renormalization theory of spin fluctuations, with reciprocal susceptibility above T C . We found that the magnetic property of La 0.7 Ca 0.3 MnO 3 is weakly itinerant ferromagnetic. A large reversible MCE and no hysteresis loss with a considerable value of refrigerant capacity indicate that La 0.7 Ca 0.3 MnO 3 single crystal is a potential candidate as a magnetic refrigerant.

Monte Carlo simulation study of magnetocaloric effect in NdMnO{sub 3} perovskite

Energy Technology Data Exchange (ETDEWEB)

Masrour, R., E-mail: rachidmasrour@hotmail.com [Laboratory of Materials, Processes, Environment and Quality, Cady Ayyed University, National School of Applied Sciences, PB 63 46000 Safi (Morocco); Laboratoire de Magnétisme et Physique des Hautes Energies L.M.P.H.E.URAC 12, Université Mohammed V, Faculté des Sciences, B.P. 1014, Rabat (Morocco); Jabar, A. [Laboratoire de Magnétisme et Physique des Hautes Energies L.M.P.H.E.URAC 12, Université Mohammed V, Faculté des Sciences, B.P. 1014, Rabat (Morocco); Benyoussef, A. [Laboratoire de Magnétisme et Physique des Hautes Energies L.M.P.H.E.URAC 12, Université Mohammed V, Faculté des Sciences, B.P. 1014, Rabat (Morocco); Institute of Nanomaterials and Nanotechnologies, MAScIR, Rabat (Morocco); Hassan II Academy of Science and Technology, Rabat (Morocco); Hamedoun, M. [Institute of Nanomaterials and Nanotechnologies, MAScIR, Rabat (Morocco); Hlil, E.K. [Institut Curie, CNRS et Université Joseph Fourier, BP 166, F-38042 Grenoble Cedex 9 (France)

2016-03-01

The magnetocaloric effect in NdMnO{sub 3} perovskite is investigated by using the Monte Carlo simulations. The Curie temperature T{sub C} of NdMnO{sub 3} compound is deduced from the variation of the magnetization vs. the temperature with different values of external magnetic field. The variation of magnetization with the external magnetic field H is given. The specific heat with the temperature is established for different external magnetic field. The thermal magnetic entropy for different external magnetic field and different exchange interactions in NdMnO{sub 3} compound is obtained. The adiabatic temperature change is obtained. The relative cooling power with different external magnetic field is established. The magnetocaloric effect has been investigated from magnetization. - Highlights: • Results obtained show that the PM–FM transition is of second order in NdMnO{sub 3}. • Critical properties of NdSi at the FM–PM transition have been analyzed. • The Curie temperature and magnetic entropy have been obtained.

Pressure effects on the magnetocaloric properties of MnFeP1-x As x

International Nuclear Information System (INIS)

Brueck, E.; Kamarad, J.; Sechovsky, V.; Arnold, Z.; Tegus, O.; Boer, F.R. de

2007-01-01

We studied the effect of hydrostatic pressure on the magnetic and magnetocaloric properties of the potential magnetic-refrigerant materials MnFeP 1- x As x with x=0.35 and 0.55. While applied pressure reduces both the Curie temperature and magnetic moment of the former compound, the Curie temperature of the latter is increased whereas the moment is hardly affected by pressure. The same trends are seen in the magnetocaloric properties. These results indicate a different character of the magnetism in these two materials. While the compound with x=0.35 exhibits a volume instability like a weak itinerant ferromagnet, whereas the one with x=0.55 behaves as a strong itinerant ferromagnet. An alternative scenario may be formulated within the localized-moment picture. One may interpret the effect of pressure on the compound with x=0.35 as an indication of pressure-induced enhancement of antiferromagnetic interactions. This latter interpretation is offered by a pronounced enhancement of the high-field susceptibility under pressure

Magnetocaloric effect in Sr2CrIrO6 double perovskite: Monte Carlo simulation

Science.gov (United States)

El Rhazouani, O.; Slassi, A.; Ziat, Y.; Benyoussef, A.

2017-05-01

Monte Carlo simulation (MCS) combined with the Metropolis algorithm has been performed to study the magnetocaloric effect (MCE) in the promising double perovskite (DP) Sr2CrIrO6 that has not so far been synthetized. This paper presents the global magneto-thermodynamic behavior of Sr2CrIrO6 compound in term of MCE and discusses the behavior in comparison to other DPs. Thermal dependence of the magnetization has been investigated for different values of reduced external magnetic field. Thermal magnetic entropy and its change have been obtained. The adiabatic temperature change and the relative cooling power have been established. Through the obtained results, Sr2CrIrO6 DP could have some potential applications for magnetic refrigeration over a wide temperature range above room temperature and at large magnetic fields.

Toward a better understanding of the magnetocaloric effect: An experimental and theoretical study of MnFe{sub 4}Si{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Gourdon, Olivier, E-mail: gourdono@lanl.gov [Los Alamos Neutron Scattering Center, National Laboratory, Los Alamos, NM 87545 (United States); Gottschlich, Michael; Persson, Joerg [Jülich Center for Neutron Science JCNS-2 and Peter Grünberg Institut PGI-4, JARA-FIT, Forschungszentrum Jülich 52425 Jülich (Germany); Cruz, Clarina de la [Quantum Condensed Matter Division, Spallation Neutron Source, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Petricek, Vaclav [Institute of Physics ASCR v.v.i., Na Slovance 2, 182 21 Prague (Czech Republic); McGuire, Michael A. [Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Brückel, Thomas [Jülich Center for Neutron Science JCNS-2 and Peter Grünberg Institut PGI-4, JARA-FIT, Forschungszentrum Jülich 52425 Jülich (Germany)

2014-08-15

The intermetallic compound MnFe{sub 4}Si{sub 3} has been studied by high-resolution Time of Flight (TOF) neutron powder diffraction. MnFe{sub 4}Si{sub 3} crystallizes in the hexagonal space group P6{sub 3}/mcm with lattice constants of a=b=6.8043(4) Å and c=4.7254(2) Å at 310 K. Magnetic susceptibility measurements show clearly the magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. Magnetic structure refinements based on neutron powder diffraction data with and without external magnetic field reveal strong evidence on the origin of the large magnetocaloric effect (MCE) in this material as a partial reordering of the spins between ∼270 K and 300 K. In addition, electronic structure calculations using the self-consistent, spin-polarized Tight Binding-Linear MuffinTin Orbital (TB-LMTO) method were also accomplished to address the “coloring problem” (Mn/Fe site preference) as well as the unique ferromagnetic behavior of this intermetallic compound. - Graphical abstract: Theoretical and experimental reinvestigation of the magnetic structure of MnFe{sub 4}Si{sub 3} for a better understanding of its large magnetocaloric effect (MCE). - Highlights: • Strong magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. • MCE associated to a partial reordering of the spins between ∼270 K and 300 K. • DFT calculations show strong relation between MCE and spintronic materials.

Simulation of the magnetocaloric effect in Tb nanofilms

Energy Technology Data Exchange (ETDEWEB)

Anselmo, Dory Hélio A. L., E-mail: doryh@dfte.ufrn.br [Departamento de Física Teórica e Experimental (DFTE), Universidade Federal do Rio Grande do Norte (UFRN), Natal-RN (Brazil); Mello, Vamberto D. [Departamento de Física,Universidade do Estado do Rio Grande do Norte (UERN), Mossoró-RN (Brazil); Vasconcelos, Manoel S. [Escola de Ciência e Tecnologia (ECT), Universidade Federal do Rio Grande do Norte (UFRN), Natal-RN (Brazil)

2014-03-31

Rare-earth (RE) metals have different magnetic structures resulting from the competition between the crystal-field and exchange interactions. When a magnetic field is applied it creates a third interaction and the magnetic structures are more complicated. In thin films, it is expected that even the magnetic arrangement itself can be strongly modified. Rare-earth helimagnets such as Terbium (Tb), Holmium (Ho) and Dysprosium (Dy) represent the best candidates to evidence such finite-size effects. This finite-size effect is caused by the reduced number of atoms in the direction perpendicular to the film plane that leads to a decrease of the total magnetic exchange energy. We report this contribution to the investigation of magnetocaloric effect (MCE) of thin Terbium films in the helimagnetic temperature range, from T{sub C} = 219 K to T{sub N} = 231 K, for external fields of the order of 1 kOe. We find that for strong fields, H = 50 kOe, the adiabatic temperature change ΔT near the Néel temperature is around 15 K for any thickness of Tb films. However large thickness effects are found for small values of the magnetic field. For field strength of the order of a few kOe, the thermocaloric efficiency increases significantly for ultrathin (nanomagnetic) films.

Magnetic refrigeration capabilities of magnetocaloric Ni2Mn:75Cu:25Ga

Science.gov (United States)

Mishra, S. K.; Jenkins, C. A.; Dubenko, I.; Samanta, T.; Ali, N.; Roy, S.

2013-03-01

Doping-driven competition between energetically similar ground states leads to many exciting materials phenomena such as the emergence of high-Tc superconductivity, diluted magnetic semiconductors, and colossal magnetoresistance. Doped Ni2MnGa Heusler alloy, which is a multifunctional ferromagnetic alloy with various exotic physical properties demonstrates this notion of rich phenomenology via modified ground spin states. Adopting this generic concept, here we will present a novel doped Ni2Mn.75Cu.25Ga alloy that offers unprecedented co-existence of the magnetocaloric effect and fully controlled ferromagnetism at room temperature. Application of site engineering enables us to manipulate the ground spin state that leads to the decrease in magnetic transition temperature and also increases the delocalization of the Mn magnetism. SQUID magnetometery suggests that Cu doping enhances the saturation magnetization, coercive field and clarity of magnetic hysteresis loops. By exploiting x-ray absorption techniques and measuring element specific magnetic hysteresis loops, here we will describe the microscopic origin of enhnaced magnetocaloric properties and d-d interaction driven charge transfer effects in Ni2Mn.75Cu.25Ga This work was supported by DOE Grant No. DE-FG02-06ER46291

Scaling and universality in magnetocaloric materials

DEFF Research Database (Denmark)

Smith, Anders; Nielsen, Kaspar Kirstein; Bahl, Christian R. H.

2014-01-01

-order phase transition within the context of the theory of critical phenomena. Sufficiently close to the critical temperature of a second-order material, the scaling of the isothermal entropy change will be determined by the critical exponents and will be the same as that of the singular part of the entropy......The magnetocaloric effect of a magnetic material is characterized by two quantities, the isothermal entropy change and the adiabatic temperature change, both of which are functions of temperature and applied magnetic field. We discuss the scaling properties of these quantities close to a second...... fields are not universal, showing significant variation for models in the same universality class. As regards the adiabatic temperature change, it is not determined exclusively by the singular part of the free energy and its derivatives. We show that the field dependence of the adiabatic temperature...

Evolution of magnetostructural transition and magnetocaloric effect with Al doping in MnCoGe1-xAlx compounds

KAUST Repository

Bao, Lifu; Hu, Fengxia; Wu, Rongrong; Wang, Jianping; Chen, Liming; Sun, Jirong; Shen, Baogen; Li, Lain-Jong; Zhang, Bei; Zhang, Xixiang

2014-01-01

The effect of Al doping in MnCoGe1-xAlx compounds has been investigated. The substitution of Al for Ge enhances Mn-Mn covalent bonding by shortening the distance of nearest Mn atom layers, and thus stabilizes the hexagonal structure. As a result, first-order magnetostructural transition between ferromagnetic martensite and paramagnetic austenite takes place for the optimized compositions (x = 0.01, 0.02). Accompanied with the magnetostructural transition, large magnetocaloric effect (MCE) is observed. More doping of Al(x = 0.03, 0.04) leads to the separation of magnetic and structural transitions and remarkable reduction of MCE. © 2014 IOP Publishing Ltd.

Evolution of magnetostructural transition and magnetocaloric effect with Al doping in MnCoGe1-xAlx compounds

KAUST Repository

Bao, Lifu

2014-01-03

The effect of Al doping in MnCoGe1-xAlx compounds has been investigated. The substitution of Al for Ge enhances Mn-Mn covalent bonding by shortening the distance of nearest Mn atom layers, and thus stabilizes the hexagonal structure. As a result, first-order magnetostructural transition between ferromagnetic martensite and paramagnetic austenite takes place for the optimized compositions (x = 0.01, 0.02). Accompanied with the magnetostructural transition, large magnetocaloric effect (MCE) is observed. More doping of Al(x = 0.03, 0.04) leads to the separation of magnetic and structural transitions and remarkable reduction of MCE. © 2014 IOP Publishing Ltd.

Magneto-caloric and magneto-resistive properties of La0.67Ca0.33-xSrxMnO3

International Nuclear Information System (INIS)

Reves Dinesen, Anders

2004-08-01

This thesis presents results of an experimental investigation of magneto-caloric and magneto-resistive properties of a series of polycrystalline Ca- and Sr-doped lanthanum manganites, La 0.67 Ca 0.33-x Sr x MnO 3 (0≤ x ≤ 0.33), with the perovskite structure. The samples consisted of sintered oxide powders prepared the glycine-nitrate combustion technique. The compounds were ferromagnetic and showed a Curie transition in the temperature range 267370 K (T C increased with increasing x). An analysis of the structural properties was carried out by means of x-ray diffraction and the Rietveld technique. The variation of the Ca/Sr ratio was found to cause a transition from orthorhombic to rhombohedral symmetry in the composition range 0.110 0.67 Ca 0.33-x Sr x MnO 3 samples was measured directly and indirectly (by means of magnetization measurements). All the samples showed a magnetocaloric effect in the vicinity of T C . A model for the mag-netocaloric effect based on Weiss mean field theory and classical theories for heat capacities was developed. The model provided reasonable predictions of the magneto-caloric properties of the samples. The compounds with low Sr content showed a magnetocaloric effect comparable to that of Gadolinium, the prototypical working material for magnetic refrigeration at room temperature. A less comprehensive part of the investigation regarded the magneto-resistive properties of the La 0.67 Ca 0.33-x Sr x MnO 3 system. It was found that th polycrystalline nature of the compounds played a decisive role for the magnetotransport properties. Characteristic grain boundary effects, such as a low-field magnetoresistance, which is absent in single-crystalline perovskites, were observed. The low-field effect is usually ascribed to spin-dependent scattering in grain boundaries. Qualitatively the results obtained for the La 0.67 Ca 0.33-x Sr x MnO 3 samples were consistent with this model. The resistivity contribution arising from the presence of

Indirect measurement of the magnetocaloric effect using a novel differential scanning calorimeter with magnetic field

DEFF Research Database (Denmark)

Jeppesen, Stinus; Linderoth, Søren; Pryds, Nini

2008-01-01

A simple and high-sensitivity differential scanning calorimeter (DSC) unit operating under magnetic field has been built for indirect determination of the magnetocaloric effect. The principle of the measuring unit in the calorimeter is based on Peltier elements as heat flow sensors. The high...

A Preisach approach to modeling partial phase transitions in the first order magnetocaloric material MnFe(P,As)

DEFF Research Database (Denmark)

von Moos, Lars; Bahl, C.R.H.; Nielsen, Kaspar Kirstein

2014-01-01

of MnFe(P,As) under partial phase transitions, which is similar to what materials experience in actual magnetic refrigeration devices. Partial phase transition curves, in the absence of a magnetic field, are measured using calorimetry and the experimental results are compared to simulations......Magnetic refrigeration is an emerging technology that could provide energy efficient and environmentally friendly cooling. Magnetocaloric materials in which a structural phase transition is found concurrently with the magnetic phase transition are often termed first order magnetocaloric materials....... Such materials are potential candidates for application in magnetic refrigeration devices. However, the first order materials often have adverse properties such as hysteresis, making actual performance troublesome to quantify, a subject not thoroughly studied within this field.Here we investigate the behavior...

Cessations and reversals of the large-scale circulation in turbulent thermal convection.

Science.gov (United States)

Xi, Heng-Dong; Xia, Ke-Qing

2007-06-01

We present an experimental study of cessations and reversals of the large-scale circulation (LSC) in turbulent thermal convection in a cylindrical cell of aspect ratio (Gamma) 1/2 . It is found that cessations and reversals of the LSC occur in Gamma = 1/2 geometry an order-of-magnitude more frequently than they do in Gamma=1 cells, and that after a cessation the LSC is most likely to restart in the opposite direction, i.e., reversals of the LSC are the most probable cessation events. This contrasts sharply to the finding in Gamma=1 geometry and implies that cessations in the two geometries are governed by different dynamics. It is found that the occurrence of reversals is a Poisson process and that a stronger rebound of the flow strength after a reversal or cessation leads to a longer period of stability of the LSC. Several properties of reversals and cessations in this system are found to be statistically similar to those of geomagnetic reversals. A direct measurement of the velocity field reveals that a cessation corresponds to a momentary decoherence of the LSC.

Magnetocaloric and magnetoresistive properties of La0.67Ca0.33-xSrxMnO3

DEFF Research Database (Denmark)

Dinesen, Anders Reves

This thesis presents results of an experimental investigation of magneto-caloric and magnetoresistive properties of a series of polycrystalline Ca- and Sr-doped lanthanum manganites, La0.67Ca0.33-xSrxMnO3 (0=x=0.33 ), with the perovskite structure. The samples consisted of sintered oxide powders...... prepared the glycine-nitrate combustion technique. The compounds were ferromagnetic and showed a Curie transition in the temperature range 267–370 K (TC increased with increasing x). An analysis of the structural properties was carried out by means of x-ray diffraction and the Rietveld technique...... and the Curie temperature. The Mn–O–Mn bonds mediate ferromagnetism and electrical transport in these materials via the double-exchange mechanism. The magnetocaloric effect of the La0.67Ca0.33-xSrxMnO3 samples was measured directly and indirectly (by means of magnetization measurements). All the samples showed...

Direct measurement of the magnetocaloric effect in Tb5Si2Ge2

International Nuclear Information System (INIS)

Tocado, L.; Palacios, E.; Burriel, R.

2005-01-01

A method for measuring the adiabatic temperature change ΔT S upon quasi-static application of an external magnetic field H is proposed. ΔT S is directly measured with an accuracy better than 0.01K. Results of experiments on the giant magnetocaloric compound Tb 5 Si 2 Ge 2 are compared with those obtained from magnetization and heat capacity in an applied field

Magnetocaloric properties of manganese(III) porphyrins bearing 2,6-di-tert-butylphenol groups

Energy Technology Data Exchange (ETDEWEB)

Korolev, V.V., E-mail: vvk@isc-ras.ru [G. A. Krestov Institute of Solution Chemistry of the Russian Academy of Sciences, Akademicheskaya str., 1, Ivanovo 153045 (Russian Federation); Lomova, T.N.; Maslennikova, A.N.; Korolev, D.V. [G. A. Krestov Institute of Solution Chemistry of the Russian Academy of Sciences, Akademicheskaya str., 1, Ivanovo 153045 (Russian Federation); Shpakovsky, D.B.; Zhang, Jianwei; Milaeva, E.R. [Lomonosov Moscow State University, Department of Medicinal Chemistry and Fine Organic Synthesis, Moscow 119991 (Russian Federation)

2016-03-01

Magnetocaloric effect (MCE) and heat capacity during the magnetization of (5,10,15,20-tetrakis(3,5-di-tert-butyl-4-hydroxyphenyl)porphynato) manganese (III) chloride (1), (5-(4-hydroxyphenyl)-10,15,20-tris(3,5-di-tert-butyl-4-hydroxyphenyl) porphynato) manganese (III) chloride (2), and (5-(4-palmitoyloxyphenyl)-10,15,20-tris(3,5-di-tert-butyl-4-hydroxyphenyl) porphynato) manganese (III) chloride (3) in their aqueous suspensions were determined by the microcalorimetric method over the temperature range of 278–320 K and in magnetic fields from 0 to 1 T. MCE was positive for all complexes studied, i.e. the magnetic field impression under adiabatic conditions led to an increase in temperature of the complexes suspensions. MCE increased with an increase in the magnetic field induction at all temperatures studied. Dependences of MCE on temperature had weak maxima at 298 K at all magnetic induction values. The disturbance of the intermolecular hydrogen-bonding of hydroxyl groups is one of probable reasons for such dependences type. MCE values increased under the palmitoyl substituent incorporation into one of the phenol groups at all temperatures. The heat capacity of the studied complexes rose slightly with temperature growth. Dependences of the heat capacity on temperature showed that the magnetic component of the heat capacity did not appear due to the presence of the manganese atom acting as a paramagnetic center in complexes 1, 2, and 3. The relation between the complexes structure and their magnetothermal properties was analyzed. It was justified that the changes of magnetothermal properties were caused by electronic substitution effects and, to an even greater degree, by the conditions of intermolecular hydrogen bonds formation in the paramagnetic materials. - Highlights: • The magnetocaloric effect and heat capacity of 3 manganese porphyrin were determined. • Temperature dependences of magnetocaloric effect has been studied. • The relation between the

Multifunctional phenomena in rare-earth intermetallic compounds with a laves phase structure: giant magnetostriction and magnetocaloric effect

Czech Academy of Sciences Publication Activity Database

Tereshina, I.; Cwik, J.; Tereshina, Evgeniya; Politova, G.; Burkhanov, G.; Chzhan, V.; Ilyushin, A.; Miller, M.; Zaleski, A.; Nenkov, K.; Schultz, L.

2014-01-01

Roč. 50, č. 11 (2014), s. 2504604 ISSN 0018-9464 Institutional support: RVO:68378271 Keywords : giant magnetostriction * Laves phase structure * magnetic anisotropy * magnetocaloric effect * rare-earth intermetallic Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.386, year: 2014

Magnetic Grüneisen parameter and magnetocaloric properties of a coupled spin–electron double-tetrahedral chain

International Nuclear Information System (INIS)

Gálisová, Lucia; Strečka, Jozef

2015-01-01

Magnetocaloric effect in a double-tetrahedral chain, in which nodal lattice sites occupied by the localized Ising spins regularly alternate with three equivalent lattice sites available for mobile electrons, is exactly investigated by considering the one-third electron filling and the ferromagnetic Ising exchange interaction between the mobile electrons and their nearest Ising neighbours. The entropy and the magnetic Grüneisen parameter, which closely relate to the magnetocaloric effect, are exactly calculated in order to investigate the relation between the ground-state degeneracy and the cooling efficiency of the hybrid spin–electron system during the adiabatic demagnetization. - Highlights: • A double-tetrahedral chain of mobile electrons and localized Ising spins is studied. • Magnetic Grüneisen parameter for the system is exactly derived. • Macroscopically degenerate phases FRU and FM constitute the ground state. • MCE is three times higher nearby FRU–FM transition than in FRU phase at small fields

Preparing Magnetocaloric LaFeSi Uniform Microstructures by Spark Plasma Sintering

DEFF Research Database (Denmark)

Vicente, N.; Ocanã, J.; Neves Bez, Henrique

2014-01-01

Spark Plasma Sintering (SPS) of LaFeSi alloy powders was conducted to prepare magnetocaloric La-Fe-Si-based uniform microstructures. Two electrically insulating discs made of alumina were interposed between the punches and powder sample inhibiting the flow of electric current across the powder...... from hydrogenated and decrypted casting ingot. The characterizations of sintered samples were performed by Scanning Electron Microscopy (SEM), Archimedes principle, Vicker’s hardness and microhardness. The uniformity of the microstructure was evaluated by checking the evidence of position on the Vicker...

Giant magnetocaloric effect in Gd5(Si2Ge2 alloy with low purity Gd

Directory of Open Access Journals (Sweden)

Cleber Santiago Alves

2004-12-01

Full Text Available Gd5(Ge1-xSi x, x < 4 based alloys are potential candidates for magnetic refrigeration in the range ~20 - ~290 K. However, one of the greatest obstacles for the use of that technology in large scale is the utilization of high pure Gd metal (99.99 wt. (% to produce the GdGeSi alloys, since the impurity elements decrease the intensity of the magnetocaloric effect (EMC¹. In this work, we prove that annealing of the Gd5Ge2Si2 can promote remarkable values for the EMC in comparison to those obtained for the alloy with high pure Gd. Also, the as cast alloy and the annealed alloy are not monophasic, but have at least two crystalline phases in their microstructure. Results for X-ray analysis, optical and electronic microscopy and magnetization measurements are reported.

Magnetocaloric effect of Er.sub.5./sub.Si.sub.4./sub. under hydrostatic pressure

Czech Academy of Sciences Publication Activity Database

Arnold, Zdeněk; Magen, C.; Morellon, L.; Algarabel, P.A.; Kamarád, Jiří; Ibarra, M. R.; Pecharsky, V. K.; Gschneidner, Jr., K. A.

2009-01-01

Roč. 79, č. 14 (2009), 144430/1-144430/6 ISSN 1098-0121 R&D Projects: GA ČR GA202/09/0030 Institutional research plan: CEZ:AV0Z10100521 Keywords : Curie temperature * entropy * erbium compounds * ferromagnetic materials * high-pressure solid-state phase transformations * magnetisation * magnetocaloric Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.475, year: 2009

Magnetic Refrigeration – an Energy Efficient Technology for the Future

DEFF Research Database (Denmark)

Bahl, Christian Robert Haffenden; Smith, Anders; Pryds, Nini

2009-01-01

. This magnetocaloric effect is inherent to all magnetic materials, but manifests itself stronger in some materials. The thermodynamically reversible nature of the magnetocaloric effect holds out the promise of a more energy efficient method of refrigeration compared to conventional compressor technology. Coupling...

Modelling and comparison studies of packed screen regenerators for active magnetocaloric refrigeration

DEFF Research Database (Denmark)

Lei, Tian; Engelbrecht, Kurt; Nielsen, K. K.

2011-01-01

In active magnetic regeneration (AMR) systems, not only the magnetocaloric properties of materials, but also the regenerator geometry plays an important role in the system performance. Packed sphere regenerators are often employed in existing prototypes, however, the characteristics such as relat...... is improved and applied to simulate the regenerators. The performance of the new regenerators is studied and compared with that of the packed sphere regenerators. Possible fabrication methods of the packed screen regenerators are also discussed....

Modelling and comparison studies of packed screen regenerators for active magnetocaloric refrigeration

DEFF Research Database (Denmark)

Lei, Tian; Engelbrecht, Kurt; Nielsen, Kaspar Kirstein

2014-01-01

In active magnetic regeneration (AMR) systems, not only the magnetocaloric properties of materials, but also the regenerator geometry plays an important role in the system performance. Packed sphere regenerators are often employed in existing prototypes, however, the characteristics such as relat...... is improved and applied to simulate the regenerators. The performance of the new regenerators is studied and compared with that of the packed sphere regenerators. Possible fabrication methods of the packed screen regenerators are also discussed....

Giant anisotropy of magnetocaloric effect in TbMnO3 single crystals

Science.gov (United States)

Jin, Jin-Ling; Zhang, Xiang-Qun; Li, Guo-Ke; Cheng, Zhao-Hua; Zheng, Lin; Lu, Yi

2011-05-01

The magnetocaloric effect (MCE) in TbMnO3 single crystals was investigated by isothermal magnetization curves for the ab plane at low temperatures. Large magnetic entropy change, ΔSM = -18.0 J/kg K, and the refrigerant capacity, RC = 390.7 J/kg, are achieved near the ordering temperature of Tb3+ moment (TNTb) under 70 kOe along the a axis. Furthermore, the TbMnO3 single crystal exhibits a giant MCE anisotropy. The difference of ΔSMand RC between the a and b axes is field and temperature dependent, which reaches maximum values of 11.4 J/kg K and 304.1 J/kg, respectively. By taking magnetocrystalline anisotropy into account, the rotating ΔSMwithin the ab plane can be well simulated, indicating that the anisotropy of ΔSMis directly contributed from the magnetocrystalline anisotropy. Our finding for giant MCE anisotropy in TbMnO3 single crystals explores the possibility of using this material for magnetic refrigerators by rotating its magnetization vector rather than moving it in and out of the magnet.

The crystal and magnetic structure of the magnetocaloric compound FeMnP(0.5)Si(0.5)

Czech Academy of Sciences Publication Activity Database

Hoglin, V.; Hudl, M.; Sahlberg, M.; Nordblad, P.; Beran, Přemysl; Anderson, I.

2011-01-01

Roč. 184, č. 9 (2011), s. 2434-2438 ISSN 0022-4596 Institutional research plan: CEZ:AV0Z10480505 Keywords : Magnetocaloric * Neutron powder diffraction * X-ray diffraction (XRD) * Magnetic refrigeration * Magnetic structure Subject RIV: CA - Inorganic Chemistry Impact factor: 2.159, year: 2011

Co and In doped Ni-Mn-Ga magnetic shape memory alloys: a thorough structural, magnetic and magnetocaloric study

Czech Academy of Sciences Publication Activity Database

Fabbrici, S.; Porcari, G.; Cugini, F.; Solzi, M.; Kamarád, Jiří; Arnold, Zdeněk; Cabassi, R.; Albertini, F.

2014-01-01

Roč. 16, č. 4 (2014), s. 2204-2222 ISSN 1099-4300 Institutional support: RVO:68378271 Keywords : magnetic shape memory materials * magnetocaloric effect * multifunctional Heusler alloys Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.502, year: 2014

Critical behavior of Y-doped Nd0.7Sr0.3MnO3 manganites exhibiting the tricritical point and large magnetocaloric effect

International Nuclear Information System (INIS)

Phan, The-Long; Ho, T.A.; Thang, P.D.; Tran, Q.T.; Thanh, T.D.; Phuc, N.X.; Phan, M.H.; Huy, B.T.; Yu, S.C.

2014-01-01

Highlights: • Tricritical point in Y-doped Nd 0.7 Sr 0.3 MnO 3 manganites. • A large magnetic-entropy change. • Magnetic inhomogeneity and phase separation. - Abstract: We have determined the values of critical exponents of two polycrystalline samples (Nd 1−x Y x ) 0.7 Sr 0.3 MnO 3 (x = 0 and 0.07) from the magnetization data versus temperature and magnetic field, M(H, T), to learn about their magnetic and magnetocaloric (MC) properties. The results reveal the samples exhibiting the crossover of first-order and second-order phase transitions, where the exponent values β = 0.271 and γ = 0.922 for x = 0, and β = 0.234–0.236 and γ = 1.044–1.063 for x = 0.07 determined by using modified Arrott plots and static-scaling hypothesis are close to those expected for the tricritical mean-field theory (β = 0.25 and γ = 1.0). Particularly, the T C of x = 0 and 0.07 can be any value in the temperature ranges of 240–255 K and 170–278 K, respectively, depending on the magnitude of applied magnetic field and determination techniques. Around the T C , studying the MC effect of the samples has revealed a large magnetic-entropy change (ΔS m ) up to ∼8 J/kg K for the applied field interval ΔH = 50 kOe, corresponding to refrigerant capacity values of 200–245 J/kg. These phenomena are related to the crossover nature and the persisting of FM/anti-FM interactions even above the T C , as further confirmed by electron-spin-resonance data, Curie–Weiss law-based analyses, and an exponential parameter characteristic of magnetic order n = dLn|ΔS m |/dLnH

Giant magnetocaloric effect in isostructural MnNiGe-CoNiGe system by establishing a Curie-temperature window

KAUST Repository

Liu, E. K.

2013-03-28

An effective scheme of isostructural alloying was applied to establish a Curie-temperature window in isostructural MnNiGe-CoNiGe system. With the simultaneous accomplishment of decreasing structural-transition temperature and converting antiferromagnetic martensite to ferromagnetic state, a 200 K Curie-temperature window was established between Curie temperatures of austenite and martensite phases. In the window, a first-order magnetostructural transition between paramagnetic austenite and ferromagnetic martensite occurs with a sharp jump in magnetization, showing a magnetic entropy change as large as −40 J kg−1 K−1 in a 50 kOe field change. This giant magnetocaloric effect enables Mn1− x Co x NiGe to become a potential magnetic refrigerant.

A Preisach approach to modeling partial phase transitions in the first order magnetocaloric material MnFe(P,As)

Energy Technology Data Exchange (ETDEWEB)

Moos, L. von, E-mail: lmoo@dtu.dk [Department of Energy Conversion and Storage, Technical University of Denmark, 4000 Roskilde (Denmark); Bahl, C.R.H.; Nielsen, K.K.; Engelbrecht, K. [Department of Energy Conversion and Storage, Technical University of Denmark, 4000 Roskilde (Denmark); Küpferling, M.; Basso, V. [Istituto Nazionale di Ricerca Metrologica, 10135 Torino (Italy)

2014-02-15

Magnetic refrigeration is an emerging technology that could provide energy efficient and environmentally friendly cooling. Magnetocaloric materials in which a structural phase transition is found concurrently with the magnetic phase transition are often termed first order magnetocaloric materials. Such materials are potential candidates for application in magnetic refrigeration devices. However, the first order materials often have adverse properties such as hysteresis, making actual performance troublesome to quantify, a subject not thoroughly studied within this field. Here we investigate the behavior of MnFe(P,As) under partial phase transitions, which is similar to what materials experience in actual magnetic refrigeration devices. Partial phase transition curves, in the absence of a magnetic field, are measured using calorimetry and the experimental results are compared to simulations of a Preisach-type model. We show that this approach is applicable and discuss what experimental data is required to obtain a satisfactory material model.

The effects of substituting Ag for In on the magnetoresistance and magnetocaloric properties of Ni-Mn-In Heusler alloys

Directory of Open Access Journals (Sweden)

Sudip Pandey

2016-05-01

Full Text Available The effect of substituting Ag for In on the structural, magnetocaloric, and thermomagnetic properties of Ni50Mn35In15−xAgx (x = 0.1, 0.2, 0.5, and 1 Heusler alloys was studied. The magnitude of the magnetization change at the martensitic transition temperature (TM decreased with increasing Ag concentration. Smaller magnetic entropy changes (ΔSM were observed for the alloys with larger Ag concentrations and the martensitic transition shifted to higher temperature. A shift of TM by about 25 K to higher temperature was observed for an applied hydrostatic pressure of P = 6.6 kbar with respect to ambient pressure. A large drop in resistivity was observed for large Ag concentration. The magnetoresistance was dramatically suppressed due to an increase in the disorder of the system with increasing Ag concentration. Possible mechanisms responsible for the observed behavior are discussed.

Pressure effects on the magnetocaloric properties of MnFeP.sub.1-x./sub.As.sub.x./sub..

Czech Academy of Sciences Publication Activity Database

Brück, E.; Kamarád, Jiří; Sechovský, V.; Arnold, Zdeněk; Tegus, O.; De Boer, F. R.

2007-01-01

Roč. 310, - (2007), e1008-e1009 ISSN 0304-8853 Institutional research plan: CEZ:AV0Z10100521 Keywords : magnetic refrigeration * magnetocaloric effect * pressure effect * MnFe(P, As) compounds Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.704, year: 2007

Magnetocaloric effect of Gd4(BixSb1-x)3 alloy series

International Nuclear Information System (INIS)

Niu, Xuejun

1999-01-01

Alloys from the Gd 4 (Bi x Sb 1-x ) 3 series were prepared by melting a stoichiometric amounts of pure metals in an induction furnace. The crystal structure is of the anti-Th 3 P 4 type (space group Ibar 43d) for all the compounds tested. The linear increase of the lattice parameters with Bi concentration is attributed to the larger atomic radius of Bi than that of Sb. Magnetic measurements show that the alloys order ferromagnetically from 266K to 330K, with the ordering temperature increasing with decreasing Bi concentration. The alloys are soft ferromagnets below their Curie temperatures, and follow the Curie-Weiss law above their ordering temperatures. The paramagnetic effective magnetic moments are low compared to the theoretical value for a free Gd 3+ , while the ordered magnetic moments are close to the theoretical value for Gd. The alloys exhibit a moderate magnetocaloric effect (MCE) whose maxima are located between 270K and 338K and have relatively wide peaks. The peak MCE temperature decreases with decreasing Bi concentration while the peak height increases with decreasing Bi concentration. The Curie temperatures determined from inflection points of heat capacity are in good agreement with those obtained from the magnetocaloric effect. The MCE results obtained from the two different methods (magnetization and heat capacity) agree quite well with each other for all of the alloys in the series

Magneto-caloric and magneto-resistive properties of La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Reves Dinesen, Anders

2004-08-01

This thesis presents results of an experimental investigation of magneto-caloric and magneto-resistive properties of a series of polycrystalline Ca- and Sr-doped lanthanum manganites, La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3} (0{<=} x {<=} 0.33), with the perovskite structure. The samples consisted of sintered oxide powders prepared the glycine-nitrate combustion technique. The compounds were ferromagnetic and showed a Curie transition in the temperature range 267370 K (T{sub C} increased with increasing x). An analysis of the structural properties was carried out by means of x-ray diffraction and the Rietveld technique. The variation of the Ca/Sr ratio was found to cause a transition from orthorhombic to rhombohedral symmetry in the composition range 0.110 < x < 0.165. The analysis suggested a strong correlation between structural properties and magnetism, for instance a relationship between the mean MnOMn bond angle and the Curie temperature. The MnOMn bonds mediate ferromagnetism and electrical transport in these materials via the double-exchange mechanism. The magnetocaloric effect of the La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3} samples was measured directly and indirectly (by means of magnetization measurements). All the samples showed a magnetocaloric effect in the vicinity of T{sub C}. A model for the mag-netocaloric effect based on Weiss mean field theory and classical theories for heat capacities was developed. The model provided reasonable predictions of the magneto-caloric properties of the samples. The compounds with low Sr content showed a magnetocaloric effect comparable to that of Gadolinium, the prototypical working material for magnetic refrigeration at room temperature. A less comprehensive part of the investigation regarded the magneto-resistive properties of the La{sub 0.67}Ca{sub 0.33-x}Sr{sub x}MnO{sub 3} system. It was found that th polycrystalline nature of the compounds played a decisive role for the magnetotransport properties

Magnetocaloric effect in potassium doped lanthanum manganite perovskites prepared by a pyrophoric method

Science.gov (United States)

Das, Soma; Dey, T. K.

2006-08-01

The magnetocaloric effect (MCE) in fine grained perovskite manganites of the type La1-xKxMnO3 (0value of 3.00 J kg-1 K-1 at 310 K amongst the compounds investigated. Moreover, the maximum magnetic entropy change exhibits a linear dependence with applied magnetic field. The estimated adiabatic temperature change at TC and at 1 T field also increases with K doping, being a maximum of 2.1 K for the La0.85K0.15MnO3 compound. The relative cooling power (RCP) of La1-xKxMnO3 compounds is estimated to be about one-third of that of the prototype magnetic refrigerant material (pure Gd). However, La1-xKxMnO3 compounds possess an MCE around room temperature, which is comparable to that of Gd. Further, tailoring of their TC, higher chemical stability, lower eddy current heating and lower cost of synthesis are some of the attractive features of K doped lanthanum manganites that are advantageous for a magnetic refrigerant. The temperature dependence of the magnetic entropy change (ΔSM) measured under various magnetic fields is explained fairly well using the Landau theory of phase transitions. Contributions of magnetoelastic and electron interaction are found to have a strong influence in the magnetocaloric effect of manganites.

Phase control studies in Gd5Si2Ge2 giant magnetocaloric compound

International Nuclear Information System (INIS)

Belo, J.H.; Pereira, A.M.; Ventura, J.; Oliveira, G.N.P.; Araújo, J.P.; Tavares, P.B.; Fernandes, L.; Algarabel, P.A.; Magen, C.; Morellon, L.

2012-01-01

Highlights: ► Study of time dependence of O(I) to M phase. ► Determination of the optimal annealing time. ► New method for phase amount estimation (O(I) and M). ► Effect of annealing on the MCE. ► Analysis of the nature of the magnetic transition through the Arrot plot representation. - Abstract: A systematic set of annealings on arc-melted synthesized Gd 5 Si 2 Ge 2 sample was performed. Through powder X-ray diffraction (XRD) and magnetometry measurements we monitored the effect of varying the annealing time with constant temperature (T = 1473 K) on the formation of the monoclinic (M) crystallographic phase fraction, which is the one responsible for the giant magnetocaloric effect (GMCE) in this compound. The conversion of the orthorhombic O(I) crystallographic phase into M was achieved, resulting in a significant increase of the M mass fraction. Such conversion led to a change in the magnetic transition nature, evolving from a second to a first order transition for the as-cast and annealed samples, respectively. An optimal annealing time range for the M phase conversion was identified to be within 80–120 min at T = 1473 K followed by a rapid quenching to liquid N 2 . Furthermore, an increase up to ∼50% of the magnetocaloric effect was obtained for the sample annealed during 120 min.

Table-like magnetocaloric effect of Fe88−xNdxCr8B4 composite materials

International Nuclear Information System (INIS)

Lai, J.W.; Zheng, Z.G.; Zhong, X.C.; Franco, V.; Montemayor, R.; Liu, Z.W.; Zeng, D.C.

2015-01-01

The narrow working temperature range due to the sharp magnetic entropy change |ΔS M | peak and large thermal or magnetic hysteresis restricts the practical application of magnetocaloric materials. In this work, the table-like magnetocaloric effect (MCE) was obtained in the multilayer composite of Fe 88−x Nd x Cr 8 B 4 alloys with various Nd substitutions for Fe (x=5, 8, 10, 12, and 15), which were prepared by arc-melting followed by melt-spinning. The substation of Nd was found to enhance the glass-forming ability. For the alloys with Nd substitution from 5 at% to 15 at%, the Curie temperature (T C ) ranged from 322 K to 350 K and the peak value of |ΔS M | remained almost constant, 3.4–3.5 J/(kg K) under an applied field of 0–5 T. The composite with various Nd contents was prepared by stocking the ribbons layer by layer. The |ΔS M | of the composite approached a nearly constant value of ∼3.2 J/(kg K) in a field change of 0–5 T in a wide temperature span over 40 K, resulting in large refrigerant capacity value of >408 J/kg. This |ΔS M | value was much larger than the previous reported Fe-based amorphous composite Fe 78−x Ce x Si 4 Nb 5 B 12 Cu 1 . This composite can be used as the working material in the Ericsson-cycle magnetic regenerative refrigerator around room temperature. - Highlights: • The T C ranges from 322 K to 350 K when increasing Nd substitution from 5 to 15 at%. • |ΔS M | remains relatively constant, about 3.4–3.5 J/(kg K) under H=0–5 T. • RC decreases from 93 to 78 J/kg in a field change of 1.5 T when Nd increasing. • Table-like MCE ,|ΔS M | ~3.2J/kg K under 0–5 T, appeared in the composite. • A wide working temperature range (40 K) and enhanced RC (>408J/kg) were obtained in the composite

Gd.sub.90./sub.Co.sub.2.5./sub.Fe.sub.7.5./sub. alloy displaying enhanced magnetocaloric properties.

Czech Academy of Sciences Publication Activity Database

Provenzano, V.; Shull, R. D.; Kletetschka, Günther; Stutzman, P. E.

2015-01-01

Roč. 622, February (2015), s. 1061-1067 ISSN 0925-8388 Institutional support: RVO:67985831 Keywords : magnetocaloric properties * bulk gadolinium * gadolinium-based alloy * magnetic refrigeration * magnetic hysteresis * refrigeration capacity Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 3.014, year: 2015

Influence of Dy addition on the magnetocaloric effect of La0.67Ca0.33Mn0.9V0.1O3 ceramics

International Nuclear Information System (INIS)

Nisha, P.; Savitha Pillai, S.; Suresh, K.G.; Raama Varma, Manoj

2012-01-01

The influence of partial substitution of La by Dy on the magnetocaloric response of (La 1-x Dy x ) 0.67 Ca 0.33 Mn 0.9 V 0.1 O 3 , where x=0.03, 0.15 and 0.25 is studied. Rietveld refinement of X-ray diffraction pattern using GSAS method shows that the compounds adopt the orthorhombic structure with Pnma space group. The systematic change in lattice parameters and magnetic phase transition indicates the substitution effect of Dy. From the magnetization isotherms at different temperatures, magnetic entropy change close to their respective transition temperatures (T C ) has been evaluated. The maximum value of entropy change near T C is found to be about 4.8 J/kg K at 187.5 K for LCMVDy 0.03 , 2.45 J/kg K at 107.5 K for LCMVDy 0.15 and 2.15 J/kg K at 92.5 K for LCMVDy 0.25 at 4 T. Dy addition produces a reduction in T C and in magnitude of the magnetic entropy change. Even though the entropy change decreases with increasing Dy substitution the refrigerant temperature range, ΔT, is found to be 10 K for LCMVDy 0.03 , 31 K for LCMVDy 0.15 and 35 K for LCMVDy 0.25 compounds [90%] at 4 T. The field dependence of the magnetic entropy change is also analyzed showing the power law dependence, ΔS M ∞H n where n=0.75(2) for LCMVDy 0.03 , n=0.80(4) for LCMVDy 0.15 and n=0.92(8) for LCMVDy 0.25 compounds at their respective transition temperatures. The relative cooling power and its field dependance are also analyzed. - Highlights: → Studied magnetocaloric response of Dy substituted solid state synthesized LCMVO. → Studied the field dependence of the magnetic entropy change (ΔS M ∞H n ). → Studied the field dependence of Relative cooling power (RCP∞H 1+1/δ ). → Considerably large magnetocaloric effect and moderate relative cooling power.

Reverse peroneal artery flap for large defects of ankle and foot: A reliable reconstructive technique

Directory of Open Access Journals (Sweden)

Jose Tharayil

2012-01-01

Full Text Available Background: Large soft tissue defects around the lower third of the leg, ankle and foot always have been challenging to reconstruct. Reverse sural flaps have been used for this problem with variable success. Free tissue transfer has revolutionised management of these problem wounds in selected cases. Materials and Methods: Twenty-two patients with large defects around the lower third of the leg, ankle and foot underwent reconstruction with reverse peroneal artery flap (RPAF over a period of 7 years. The mean age of these patients was 41.2 years. Results: Of the 22 flaps, 21 showed complete survival without even marginal necrosis. One flap failed, where atherosclerotic occlusion of peroneal artery was evident on the table. Few patients had minor donor site problems that settled with conservative management. Conclusions: RPAF is a very reliable flap for the coverage of large soft tissue defects of the heel, sole and dorsum of foot. This flap adds versatility in planning and execution of this extended reverse sural flap.

Magnetic and magnetocaloric properties of the exactly solvable mixed-spin Ising model on a decorated triangular lattice in a magnetic field

Science.gov (United States)

Gálisová, Lucia; Strečka, Jozef

2018-05-01

The ground state, zero-temperature magnetization process, critical behaviour and isothermal entropy change of the mixed-spin Ising model on a decorated triangular lattice in a magnetic field are exactly studied after performing the generalized decoration-iteration mapping transformation. It is shown that both the inverse and conventional magnetocaloric effect can be found near the absolute zero temperature. The former phenomenon can be found in a vicinity of the discontinuous phase transitions and their crossing points, while the latter one occurs in some paramagnetic phases due to a spin frustration to be present at zero magnetic field. The inverse magnetocaloric effect can also be detected slightly above continuous phase transitions following the power-law dependence | - ΔSisomin | ∝hn, where n depends basically on the ground-state spin ordering.

Magnetic, transport and magnetocaloric properties in the Laves phase intermetallic Ho (Co1−xAlx)2 compounds

International Nuclear Information System (INIS)

Ivanova, T.I.; Nikitin, S.A.; Tskhadadze, G.A.; Koshkid’ko, Yu.S.; Suski, W.; Iwasieczko, W.; Badurski, D.

2014-01-01

Highlights: • The Al influence on magnetic properties of the Ho (Co 1-x Al x ) 2 compounds is analyzed. • The first-order magnetic transition appears in sample with Al concentrations x ≤ 0.06. • The MCE and Curie temperature TC demonstrate complex Al concentration dependences. • The magnetoresistance for sample with Al concentration x = 0.06 (58%) is maximum. • High magnetic fields changes the Curie temperature T c of the Ho (Co 1−x Al x ) 2 compounds. - Abstract: The magnetization, magnetoresistivity and magnetocaloric effect (MCE) of the Ho (Co 1−x Al x ) 2 Laves phase intermetallic compounds for x ⩽ 0.2 have been investigated. Complex measurements have been carried out in order to determine the influence of substitution in the Co sublattice by Al on the Co moment, type of the magnetic transition and related properties of these compounds. A comparative analysis of the magnetic, transport and magnetocaloric properties of Ho (Co 1−x Al x ) 2 alloys under various Al concentration is represented. Substitutions at the Co site by Al are found to result in the appearance of itinerant electron metamagnetism (IEM) at the small Al concentrations and in positive magnetovolume effect, leading to an initial increase in the ordering temperature; on the other hand the magnetic phase transition temperature as well as ΔT (MCE) do not depend in direct way on the Al concentration. The 16% increase of magnetocaloric effect for the alloy with x = 0.02 is detected in relation to maternal HoCo 2 . A giant value of magnetoresistivity (58%) is observed for the alloy with the same Al concentration

Conventional and inverse magnetocaloric effect in Pr2CuSi3 and Gd2CuSi3 compounds

International Nuclear Information System (INIS)

Wang, Fang; Yuan, Feng-ying; Wang, Jin-zhi; Feng, Tang-fu; Hu, Guo-qi

2014-01-01

Highlights: • Two phase transitions in a narrow temperature range were observed and studied. • Both typical and inverse magnetocaloric effect were observed and discussed. • The inverse magnetocaloric effect was attributed to the spin-glass behavior. - Abstract: Magnetic properties and magnetocaloric effect (MCE) in Pr 2 CuSi 3 and Gd 2 CuSi 3 compounds were investigated systematically. Both Pr 2 CuSi 3 and Gd 2 CuSi 3 compounds experienced two phase transitions in a relatively narrow temperature range: first a paramagnet (PM)–ferromagnet (FM) second-order phase transition at 12 and 26 K and then a FM–spin glass (SG) transition at 6 K and 7.5 K, respectively. The magnetic entropy change (ΔS M ) was calculated based on Maxwell relation using the collected magnetization data. The maximum of ΔS M for Pr 2 CuSi 3 and Gd 2 CuSi 3 compounds was 7.6 and 5 J kg −1 K −1 , respectively, at the applied filed change of 0–5 T. The shape of the temperature dependence of ΔS M (ΔS M –T) curve was obviously different from that of the conventional magnetic materials undergoing only one typical phase transition. In the left half part of ΔS M –T curve, ΔS M is not very sensitive to the applied field and they tend to intersect with the decrease of temperature. Both typical conventional and inverse MCE behavior were observed in Gd 2 CuSi 3 , which would be originated from the two transition features at the low temperatures

Hydrostatic pressure effect on the magnetocaloric behavior of Ga-doped MnNiGe magnetic equiatomic alloy

International Nuclear Information System (INIS)

Dutta, P; Das, D; Chatterjee, S; Pramanick, S; Majumdar, S

2016-01-01

The magnetocaloric properties of a new class of ferromagnetic shape memory alloys of nominal composition MnNiGe 0.928 Ga 0.072 have been investigated in ambient conditions as well as in the presence of external hydrostatic pressure. Both inverse (6.35 Jkg −1 K −1 for 0  −  50 kOe around 160 K) and conventional (−4.54 Jkg −1 K −1 for 0–50 kOe around 210 K) magnetocaloric effects (MCEs) have been observed around the structural and magnetic transitions respectively. The sample can be thought of as being derived from the parent MnNiGe alloy, where Ga was doped at the expense of the Ge atom. Ga doping at Ge sites brings down the martensitic transition temperature to below room temperature and induces ferromagnetism by affecting the lattice volume of the alloy. However, below the first-order martensitic transition the alloy loses its ferromagnetism. Application of external hydrostatic pressure results in a revival of ferromagnetic interactions in the martensitic phase of the alloy and a considerable increase in the refrigeration capacity around the conventional MCE region. (paper)

Effect of rapid quenching on the magnetism and magnetocaloric effect of equiatomic rare earth intermetallic compounds RNi (R = Gd, Tb and Ho)

Energy Technology Data Exchange (ETDEWEB)

Rajivgandhi, R. [Department of Physics, Indian Institute of Technology Madras, Chennai 600 036 (India); Arout Chelvane, J. [Defence Metallurgical Research Laboratory, Hyderabad 500 058 (India); Quezado, S.; Malik, S.K. [Departamento de F’ısica Teorica e Experimental, Universidade Federal do Rio Grande do Norte, Natal 59072-970 (Brazil); Nirmala, R., E-mail: nirmala@physics.iitm.ac.in [Department of Physics, Indian Institute of Technology Madras, Chennai 600 036 (India)

2017-07-01

Highlights: • Melt-spinning yields microcrystalline RNi (R = Gd, Tb and Ho) samples with texture. • The texture-induced anisotropy affects magnetic and magnetocaloric properties. • Melt-spinning helps one engineer magnetocaloric effect in rare-earth compounds. - Abstract: Magnetocaloric effect (MCE) in RNi (where R = Gd, Tb and Ho) compounds has been studied in their arc-melted and melt-spun forms. The compound GdNi has the orthorhombic CrB-type structure (Space group Cmcm, No. 63) and the compound HoNi has the orthorhombic FeB-type structure (Space group Pnma, No. 62) at room temperature regardless of their synthesis condition. However, arc-melted TbNi orders in a monoclinic structure (Space group P2{sub 1}/m, No. 11) and when it is rapidly quenched to a melt-spun form, it crystallizes in an orthorhombic structure (Space group Pnma, No. 62). The arc-melted GdNi, TbNi and HoNi compounds order ferromagnetically at ∼69 K, ∼67 K and ∼36 K (T{sub C}) respectively. While the melt-spun GdNi shows about 6 K increase in T{sub C}, the ordering temperature of TbNi remains nearly the same in both arc-melted and melt-spun forms. In contrast, a reduction in T{sub C} by about 8 K is observed in melt-spun HoNi, when compared to its arc-melted counterpart. Isothermal magnetic entropy change, ∆S{sub m}, calculated from the field dependent magnetization data indicates an enhanced relative cooling power (RCP) for melt-spun GdNi for field changes of 20 kOe and 50 kOe. A lowered RCP value is observed in melt-spun TbNi and HoNi. These changes could have resulted from the competing shape anisotropy and the granular microstructure induced by the melt-spinning process. Tailoring the MCE of rare earth intermetallic compounds by suitably controlled synthesis techniques is certainly one of the directions to go forward in the search of giant magnetocaloric materials.

Large positive magnetoresistance in intermetallic compound NdCo2Si2

Science.gov (United States)

Roy Chowdhury, R.; Dhara, S.; Das, I.; Bandyopadhyay, B.; Rawat, R.

2018-04-01

The magnetic, magneto-transport and magnetocaloric properties of antiferromagnetic intermetallic compound NdCo2Si2 (TN = 32K) have been studied. The compound yields a positive magnetoresistance (MR) of about ∼ 123 % at ∼ 5K in 8 T magnetic field. The MR value is significantly large vis - a - vis earlier reports of large MR in intermetallic compounds, and possibly associated with the changes in magnetic structure of the compound. The large MR value can be explained in terms of field induced pseudo-gaps on Fermi surface.

Magnetocaloric effect in textured rare earth intermetallic compound ErNi

Directory of Open Access Journals (Sweden)

Aparna Sankar

2018-05-01

Full Text Available Melt-spun ErNi crystallizes in orthorhombic FeB-type structure (Space group Pnma, no. 62 similar to the arc-melted ErNi compound. Room temperature X-ray diffraction (XRD experiments reveal the presence of texture and preferred crystal orientation in the melt-spun ErNi. The XRD data obtained from the free surface of the melt-spun ErNi show large intensity enhancement for (1 0 2 Bragg reflection. The scanning electron microscopy image of the free surface depicts a granular microstructure with grains of ∼1 μm size. The arc-melted and the melt-spun ErNi compounds order ferromagnetically at 11 K and 10 K (TC respectively. Field dependent magnetization (M-H at 2 K shows saturation behaviour and the saturation magnetization value is 7.2 μB/f.u. for the arc-melted ErNi and 7.4 μB/f.u. for the melt-spun ErNi. The isothermal magnetic entropy change (ΔSm close to TC has been calculated from the M-H data. The maximum isothermal magnetic entropy change, -ΔSmmax, is ∼27 Jkg-1K-1 and ∼24 Jkg-1K-1 for the arc-melted and melt-spun ErNi for 50 kOe field change, near TC. The corresponding relative cooling power values are ∼440 J/kg and ∼432 J/kg respectively. Although a part of ΔSm is lost to crystalline electric field (CEF effects, the magnetocaloric effect is substantially large at 10 K, thus rendering melt-spun ErNi to be useful in low temperature magnetic refrigeration applications such as helium gas liquefaction.

Magnetocaloric effect in textured rare earth intermetallic compound ErNi

Science.gov (United States)

Sankar, Aparna; Chelvane, J. Arout; Morozkin, A. V.; Nigam, A. K.; Quezado, S.; Malik, S. K.; Nirmala, R.

2018-05-01

Melt-spun ErNi crystallizes in orthorhombic FeB-type structure (Space group Pnma, no. 62) similar to the arc-melted ErNi compound. Room temperature X-ray diffraction (XRD) experiments reveal the presence of texture and preferred crystal orientation in the melt-spun ErNi. The XRD data obtained from the free surface of the melt-spun ErNi show large intensity enhancement for (1 0 2) Bragg reflection. The scanning electron microscopy image of the free surface depicts a granular microstructure with grains of ˜1 μm size. The arc-melted and the melt-spun ErNi compounds order ferromagnetically at 11 K and 10 K (TC) respectively. Field dependent magnetization (M-H) at 2 K shows saturation behaviour and the saturation magnetization value is 7.2 μB/f.u. for the arc-melted ErNi and 7.4 μB/f.u. for the melt-spun ErNi. The isothermal magnetic entropy change (ΔSm) close to TC has been calculated from the M-H data. The maximum isothermal magnetic entropy change, -ΔSmmax, is ˜27 Jkg-1K-1 and ˜24 Jkg-1K-1 for the arc-melted and melt-spun ErNi for 50 kOe field change, near TC. The corresponding relative cooling power values are ˜440 J/kg and ˜432 J/kg respectively. Although a part of ΔSm is lost to crystalline electric field (CEF) effects, the magnetocaloric effect is substantially large at 10 K, thus rendering melt-spun ErNi to be useful in low temperature magnetic refrigeration applications such as helium gas liquefaction.

Plasma behaviour in large reversed-field pinches and reactors

International Nuclear Information System (INIS)

Christiansen, J.P.; Bodin, H.A.B.; Carolan, P.G.; Johnston, J.W.; Newton, A.A.; Roberts, K.V.; Robinson, D.C.; Watts, M.R.C.; Piotrowicz, V.A.

1981-01-01

Recent analytic and numerical results on large reversed-field-pinch (RFP) systems and RFP reactors are presented. Predictions are made of the plasma behaviour in Eta Beta II, HBTXIA (under construction) and RFX (planned). The setting-up phase of an RFP is studied by using turbulence theory in transport equilibrium calculations, and estimates are made of the volt-seconds consumption for four different modes of field control. A prescription is given for a dynamo producing self-reversal which yields finite-β configurations. Residual instabilities of these equilibria may be resistive pressure-driven g-modes, and a new study of these modes that includes parallel viscosity indicates stability for anti β approximately 10%. The sustainment phase of the RFP is examined with tokamak scaling laws assumed for the energy confinement time. Temperatures in excess of 1keV are predicted for currents of 2MA in RFX. An operating cycle for a pulsed RFP reactor including gas puffing to reach ignition is proposed following a study of the energy replacement time for an Ohmically heated plasma. The scaling of the reactor parameters with minor radius is also investigated. (author)

Second Law Violation By Magneto-Caloric Effect Adiabatic Phase Transition of Type I Superconductive Particles

OpenAIRE

Keefe, Peter

2004-01-01

Abstract: The nature of the thermodynamic behavior of Type I superconductor particles, having a cross section less than the Ginzburg-Landau temperature dependent coherence length is discussed for magnetic field induced adiabatic phase transitions from the superconductive state to the normal state. Argument is advanced supporting the view that when the adiabatic magneto-caloric process is applied to particles, the phase transition is characterized by a decrease in entropy in violation of tradi...

Magnetocaloric effect and refrigeration cooling power in amorphous Gd7Ru3 alloys

OpenAIRE

Pramod Kumar; Rachana Kumar

2015-01-01

In this paper, we report the magnetic, heat capacity and magneto-caloric effect (MCE) of amorphous Gd7Ru3 compound. Both, temperature dependent magnetization and heat capacity data reveals that two transitions at 58 K and 34 K. MCE has been calculated in terms of isothermal entropy change (ΔSM) and adiabatic temperature change (ΔTad) using the heat capacity data in different fields. The maximum values of ΔSM and ΔTad are 21 Jmol−1K−1 and 5 K respectively, for field change of 50 kOe whereas re...

Giant magnetocaloric effect in antiferromagnetic DyVO{sub 4} compound

Energy Technology Data Exchange (ETDEWEB)

Midya, A., E-mail: arindam.midya@saha.ac.in; Khan, N.; Bhoi, D.; Mandal, P.

2014-09-01

We have investigated the magnetic and magnetocaloric properties of DyVO{sub 4} by magnetization and heat capacity measurements. χ(T) shows antiferromagnetic to paramagnetic transition at T{sub N}{sup Dy}∼3.5K. The compound undergoes a metamagnetic transition and exhibits a huge entropy change. The maximum values of magnetic entropy change (ΔS{sub M}), adiabatic temperature change (ΔT{sub ad}) and refrigerant capacity (RC) reach 26 J kg{sup −1} K{sup −1}, 17 K, and 526 J kg{sup −1}, respectively for a field change of 0–8 T. Moreover, the material is highly insulating and exhibits no thermal and field hysteresis, satisfying the necessary conditions for a good magnetic refrigerant material.

Spatially resolved measurements of the magnetocaloric effect and the local magnetic field using thermography

DEFF Research Database (Denmark)

Christensen, Dennis; Bjørk, Rasmus; Nielsen, Kaspar Kirstein

2010-01-01

The magnetocaloric effect causes a magnetic material to change temperature upon application of a magnetic field. Here, spatially resolved measurements of the adiabatic temperature change are performed on a plate of gadolinium using thermography. The adiabatic temperature change is used to extract...... the corresponding change in the local magnetic field strength. The measured temperature change and local magnetic field strength are compared to results obtained with a numerical model, which takes demagnetization into account and employs experimental data....

Pressure effect on phase transitions and magnetocaloric effect in Gd.sub.5./sub.Ge.sub.4./sub..

Czech Academy of Sciences Publication Activity Database

Arnold, Zdeněk; Skorokhod, Yuriy; Kamarád, Jiří; Magen, C.; Algarabel, P.A.

2009-01-01

Roč. 105, č. 3 (2009), 07A934/1-07A934/3 ISSN 0021-8979 R&D Projects: GA ČR(CZ) GA106/06/0368 Institutional research plan: CEZ:AV0Z10100521 Keywords : Curie temperature * ferromagnetic materials * ferromagnetic-antiferromagnetic transitions * gadolinium compounds * magnetocaloric effect Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.072, year: 2009

Some Aspects of Scaling and Universality in Magnetocaloric Materials

DEFF Research Database (Denmark)

Smith, Anders; Nielsen, Kaspar Kirstein; Bahl, Christian R.H.

2014-01-01

The magnetocaloric effect of a magnetic material is characterized by two quantities, the isothermal entropy change and the adiabatic temperature change, both of which are functions of temperature and applied magnetic field. We discuss the scaling properties of these quantities close to a second...... order phase transition within the context of critical scaling theory. In the critical region the isothermal entropy change will exhibit universal scaling exponents. However, this is only true close to Tc and for small fields; we show that for finite fields the scaling exponents in general become field...... dependent, even at Tc. Furthermore, the scaling exponents at finite fields are not universal: Two models with the same critical exponents can exhibit markedly different scaling behaviour even at relatively low fields. Turning to the adiabatic temperature change, we argue that it is not determined...

Pressure enhancement of the giant magnetocaloric effect in LaFe.sub.11.6./sub.Si.sub.1.4./sub..

Czech Academy of Sciences Publication Activity Database

Sun, Y.; Arnold, Zdeněk; Kamarád, Jiří; Wang, G.-J.; Shen, B.G.; Cheng, Z.-H.

2006-01-01

Roč. 89, č. 17 (2006), 172513/1-172513/3 ISSN 0003-6951 R&D Projects: GA ČR GA202/06/0178 Institutional research plan: CEZ:AV0Z10100521 Keywords : intermetallic compounds * magnetocaloric effect * pressure effect Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.977, year: 2006

Magnetocaloric effect and multifunctional properties of Ni-Mn-based Heusler alloys

Energy Technology Data Exchange (ETDEWEB)

Dubenko, Igor, E-mail: igor_doubenko@yahoo.com [Department of Physics, Southern Illinois University, Carbondale, IL 62901 (United States); Samanta, Tapas; Kumar Pathak, Arjun [Department of Physics, Southern Illinois University, Carbondale, IL 62901 (United States); Kazakov, Alexandr; Prudnikov, Valerii [Faculty of Physics, Moscow State University, Vorob' evy Gory, 11999I Moscow (Russian Federation); Stadler, Shane [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803 (United States); Granovsky, Alexander [Faculty of Physics, Moscow State University, Vorob' evy Gory, 11999I Moscow (Russian Federation); IKERBASQUE, The Basque Foundation for Science, 48011 Bilbao (Spain); Departamento de Fisica de Materiales, Facultad de Quimica, Universidad del Pais Vasco, Paseo M. de Lardizabal 3, 20018 Donostia - San Sebastian (Spain); Zhukov, Arcady [IKERBASQUE, The Basque Foundation for Science, 48011 Bilbao (Spain); Departamento de Fisica de Materiales, Facultad de Quimica, Universidad del Pais Vasco, Paseo M. de Lardizabal 3, 20018 Donostia - San Sebastian (Spain); Ali, Naushad [Department of Physics, Southern Illinois University, Carbondale, IL 62901 (United States)

2012-10-15

The studies of magnetocaloric properties, phase transitions, and phenomena related to magnetic heterogeneity in the vicinity of the martensitic transition (MT) in Ni-Mn-In and Ni-Mn-Ga off-stoichiometric Heusler alloys are summarized. The crystal structure, magnetocaloric effect (MCE), and magnetotransport properties were studied for the following alloys: Ni{sub 50}Mn{sub 50-x}In{sub x}, Ni{sub 50-x}Co{sub x}Mn{sub 35}In{sub 15}, Ni{sub 50}Mn{sub 35-x}Co{sub x}In{sub 15}, Ni{sub 50}Mn{sub 35}In{sub 14}Z (Z=Al, Ge), Ni{sub 50}Mn{sub 35}In{sub 15-x}Si{sub x}, Ni{sub 50-x}Co{sub x}Mn{sub 25+y}Ga{sub 25-y}, and Ni{sub 50-x}Co{sub x}Mn{sub 32-y}FeyGa{sub 18}. It was found that the magnetic entropy change, {Delta}S, associated with the inverse MCE in the vicinity of the temperature of the magneto-structural transition, TM, persists in a range of (125-5) J/(kg K) for a magnetic field change {Delta}H=5 T. The corresponding temperature varies with composition from 143 to 400 K. The MT in Ni{sub 50}Mn{sub 50-x}In{sub x} (x=13.5) results in a transition between two paramagnetic states. Associated with the paramagnetic austenite-paramagnetic martensite transition {Delta}S=24 J/(kg K) was detected for {Delta}H=5 T at T=350 K. The variation in composition of Ni{sub 2}MnGa can drastically change the magnetic state of the martensitic phase below and in the vicinity of TM. The presence of the martensitic phase with magnetic moment much smaller than that in the austenitic phase above TM leads to the large inverse MCE in the Ni{sub 42}Co{sub 8}Mn{sub 32-y}FeyGa{sub 18} system. The adiabatic change of temperature ({Delta}T{sub ad}) in the vicinity of TC and TM of Ni{sub 50}Mn{sub 35}In{sub 15} and Ni{sub 50}Mn{sub 35}In{sub 14}Z (Z=Al, Ge) was found to be {Delta}T{sub ad}=-2 K and 2 K for {Delta}H=1.8 T, respectively. It was observed that |{Delta}T{sub ad}| Almost-Equal-To 1 K for {Delta}H=1 T for both types of transitions. The results on resistivity, magnetoresistance, Hall

Magnetic and magnetocaloric properties of spin-glass material DyNi{sub 0.67}Si{sub 1.34}

Energy Technology Data Exchange (ETDEWEB)

Chen, X. [The Ames Laboratory, U.S. Department of Energy, Iowa State University, Ames, IA 50011-3020 (United States); College of Physics and Electronic Information Engineering, Neijiang Normal University, Neijiang 641100 (China); Mudryk, Y., E-mail: slavkomk@ameslab.gov [The Ames Laboratory, U.S. Department of Energy, Iowa State University, Ames, IA 50011-3020 (United States); Pathak, A.K.; Feng, W. [The Ames Laboratory, U.S. Department of Energy, Iowa State University, Ames, IA 50011-3020 (United States); Pecharsky, V.K. [The Ames Laboratory, U.S. Department of Energy, Iowa State University, Ames, IA 50011-3020 (United States); Department of Materials Science and Engineering, Iowa State University, Ames, IA 50011-2300 (United States)

2017-08-15

Highlights: • Spin-glass state is observed in the DyNi{sub 0.67}Si{sub 1.4} compound. • Random Ni/Si distribution in the AlB{sub 2}-type structure leads to magnetic frustration. • Magnetic frustration affects magnetic field dependence of magnetocaloric effect. - Abstract: Structural, magnetic, and magnetocaloric properties of DyNi{sub 0.67}Si{sub 1.34} were investigated using X-ray powder diffraction, magnetic susceptibility, and magnetization measurements. X-ray powder diffraction pattern shows that DyNi{sub 0.67}Si{sub 1.34} crystallizes in the AlB{sub 2}-type hexagonal structure (space group: P6/mmm, No. 191, a = b = 3.9873(9) Å, and c = 3.9733(1) Å). The compound is a spin-glass with the freezing temperature T{sub G} = 6.2 K. The ac magnetic susceptibility measurements confirm magnetic frustration in DyNi{sub 0.67}Si{sub 1.34}. The maximum value of the magnetic entropy change determined from M(H) data is −16.1 J/kg K at 10.5 K for a field change of 70 kOe.

Critical behavior of Y-doped Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3} manganites exhibiting the tricritical point and large magnetocaloric effect

Energy Technology Data Exchange (ETDEWEB)

Phan, The-Long; Ho, T.A. [Department of Physics, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Thang, P.D. [Faculty of Engineering Physics and Nanotechnology, VNU-University of Engineering and Technology, Xuan Thuy, Cau Giay, Hanoi (Viet Nam); Tran, Q.T. [Center for Science and Technology Communication, Ministry of Science and Technology, 113 Tran Duy Hung, Hanoi (Viet Nam); Thanh, T.D.; Phuc, N.X. [Institute of Materials Science, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet, Cau Giay, Hanoi (Viet Nam); Phan, M.H. [Department of Physics, University of South Florida, Tampa, FL 33620 (United States); Huy, B.T. [Department of Chemistry, Changwon National University, Changwon 641-773 (Korea, Republic of); Yu, S.C., E-mail: scyu@chungbuk.ac.kr [Department of Physics, Chungbuk National University, Cheongju 361-763 (Korea, Republic of)

2014-12-05

Highlights: • Tricritical point in Y-doped Nd{sub 0.7}Sr{sub 0.3}MnO{sub 3} manganites. • A large magnetic-entropy change. • Magnetic inhomogeneity and phase separation. - Abstract: We have determined the values of critical exponents of two polycrystalline samples (Nd{sub 1−x}Y{sub x}){sub 0.7}Sr{sub 0.3}MnO{sub 3} (x = 0 and 0.07) from the magnetization data versus temperature and magnetic field, M(H, T), to learn about their magnetic and magnetocaloric (MC) properties. The results reveal the samples exhibiting the crossover of first-order and second-order phase transitions, where the exponent values β = 0.271 and γ = 0.922 for x = 0, and β = 0.234–0.236 and γ = 1.044–1.063 for x = 0.07 determined by using modified Arrott plots and static-scaling hypothesis are close to those expected for the tricritical mean-field theory (β = 0.25 and γ = 1.0). Particularly, the T{sub C} of x = 0 and 0.07 can be any value in the temperature ranges of 240–255 K and 170–278 K, respectively, depending on the magnitude of applied magnetic field and determination techniques. Around the T{sub C}, studying the MC effect of the samples has revealed a large magnetic-entropy change (ΔS{sub m}) up to ∼8 J/kg K for the applied field interval ΔH = 50 kOe, corresponding to refrigerant capacity values of 200–245 J/kg. These phenomena are related to the crossover nature and the persisting of FM/anti-FM interactions even above the T{sub C}, as further confirmed by electron-spin-resonance data, Curie–Weiss law-based analyses, and an exponential parameter characteristic of magnetic order n = dLn|ΔS{sub m}|/dLnH.

Observation of magnetization reversal behavior in Sm0.9Gd0.1Cr0.85Mn0.15O3 orthochromites

Science.gov (United States)

Panwar, Neeraj; Joby, Jostin P.; Kumar, Surendra; Coondoo, Indrani; Vasundhara, M.; Kumar, Nitu; Palai, Ratnakar; Singhal, Rahul; Katiyar, Ram S.

2018-05-01

Impact of co-doping (Gd and Mn) on the magnetic properties has been systematically investigated in SmCrO3 compound. For the synthesized compound Sm0.9Gd0.1Cr0.85Mn0.15O3 (SGCMO), below the Neel transition temperature and under low applied magnetic field, temperature induced magnetization reversal at 105 K (crossover temperature) was noticed in the field cooled magnetization curve. Magnetization reversal attained maximum value of -1.03 emu/g at 17 K where spin reorientation occurred. The magnetization reversal disappeared under higher applied field. From the M-H plots an enhancement in the magnetization was observed due to Gd doping. Magnetocaloric effect at low temperatures measured through the magnetic entropy change was found sixteen times higher for this compound as compared to pristine SmCrO3 and twice to that of SmCr0.85Mn0.15O3 compound. The study reveals the importance of co-doping in tailoring the magnetic properties of rare-earth chromites.

The physical mechanism of magnetic field controlled magnetocaloric effect and magnetoresistance in bulk PrGa compound

Science.gov (United States)

Zheng, X. Q.; Wu, H.; Chen, J.; Zhang, B.; Li, Y. Q.; Hu, F. X.; Sun, J. R.; Huang, Q. Z.; Shen, B. G.

2015-01-01

The PrGa compound shows excellent performance on the magnetocaloric effect (MCE) and magnetoresistance (MR). The physical mechanism of MCE and MR in PrGa compound was investigated and elaborated in detail on the basis of magnetic measurement, heat capacity measurement and neutron powder diffraction (NPD) experiment. New types of magnetic structure and magnetic transition are found. The results of the NPD along with the saturation magnetic moment (MS) and magnetic entropy (SM) indicate that the magnetic moments are randomly distributed within the equivalent conical surface in the ferromagnetic (FM) temperature range. PrGa compound undergoes an FM to FM transition and an FM to paramagnetic (PM) transition as temperature increases. The magnetizing process was discussed in detail and the physical mechanism of the magnetic field controlled magnetocaloric effect (MCE) and the magnetoresistance (MR) was studied. The formation of the plateau on MCE curve was explained and MR was calculated in detail on the basis of the magnetic structure and the analysis of the magnetizing process. The experimental results are in excellent agreement with the calculations. Finally, the expression of MR = β(T)X2 and its application conditions were discussed, where X is M(H)/Meff, and Meff is the paramagnetic effective moment. PMID:26455711

Structural, magnetic and magnetocaloric properties of La{sub 0.7}Ca{sub 0.2}Sr{sub 0.1}Mn{sub 1−x}Cr{sub x}O{sub 3} compounds with x = 0, 0.05 and 0.1

Energy Technology Data Exchange (ETDEWEB)

Dhahri, Ah., E-mail: dhahri.ahmad@outlook.fr [Laboratoire de Physique Appliquée, Faculté des Sciences de Sfax, BP 1171, Université de Sfax, 3000 (Tunisia); Jemmali, M. [Laboratoire des Sciences des Matériaux et de l’Environnement, Faculté des Sciences de Sfax, BP 1171, Université de Sfax, 3000 (Tunisia); Taibi, K. [Département SDM, FGMGP/USTHB, 16311 (Algeria); Dhahri, E. [Laboratoire de Physique Appliquée, Faculté des Sciences de Sfax, BP 1171, Université de Sfax, 3000 (Tunisia); Hlil, E.K. [Institut Néel, CNRS et Université J. Fourier, BP 166, 38042 Grenoble (France)

2015-01-05

Highlights: • The samples crystallize in the rhombohedral structure with the R3{sup ¯}c space group. • Enhancement of T{sub C} for the rhombohedral samples. • The relative cooling power increases with Cr-doping. • All samples exhibit a large magnetocaloric effect. • High values of the magnetoresistance in all samples. - Abstract: Structural, magnetic and magnetocaloric properties of La{sub 0.7}Sr{sub 0.1}Ca{sub 0.2}Mn{sub 1−x}Cr{sub x}O{sub 3} compounds with x = 0, 0.05 and 0.1 have been investigated to shed light on Cr-doping influence. X-ray diffraction studies show that all samples crystallize in the rhombohedral symmetry with R3{sup ¯}c space group. Rietveld refinement structure shows that the insertion of Cr in Mn network modifies the structural parameters such as the volume, Mn–O–Mn angles and the Mn–O bond length. The substitution of Mn by Cr decreases the 2p-3d hybridization between O and Mn ions, reduces the bandwidth and increases the electron–phonon coupling. The investigation of magnetic and magnetocaloric properties reveals that the samples exhibit a paramagnetic(PM)–ferromagnetic (FM) transition with decreasing Curie temperature (T{sub C}) from 294 K to 255 K when Cr doping level increases. The magnetic entropy change (ΔS{sub M}{sup max}) also decreases from 6.20 J kg{sup −1} K{sup −1} for x = 0 to3.80 J kg{sup −1} K{sup −1} for x = 0.1, while the relative cooling power (RCP) increases from 234.5 to 240 J kg{sup −1}, respectively, under a magnetic field of 5 T. These outcomes suggest that Mn-site Cr doping inhibits the enhancement of the magnetocaloric effect in some perovskite manganites. This is explained by the weakening of the ferromagnetic double-exchange interaction between Mn{sup 3+} and Mn{sup 4+} ions.

The large-scale solar feed-in tariff reverse auction in the Australian Capital Territory, Australia

International Nuclear Information System (INIS)

Buckman, Greg; Sibley, Jon; Bourne, Richard

2014-01-01

Feed-in tariffs (FiTs) offer renewable energy developers significant investor certainty but sometimes at the cost of being misaligned with generation costs. Reverse FiT auctions, where the FiT rights for a predetermined capacity are auctioned, can overcome this problem but can be plagued by non-delivery risks, particularly of competitively priced proposals. In 2012 and 2013 the Australian Capital Territory (ACT) Government in Australia conducted a FiT reverse auction for 40 MW of large-scale solar generating capacity, the first such auction undertaken in the country. The auction was highly competitive in relation to price and demonstrating low delivery risks. Proposal capital costs, particularly engineering, procurement and construction costs, as well as internal rates of return, were lower than expected. The auction process revealed limited land availability for large-scale solar developments in the ACT as well as a significant perceived sovereign risk issue. The auction process was designed to mitigate non-delivery risk by requiring proposals to be pre-qualified on the basis of delivery risk, before considering FiT pricing. The scheme is likely to be used by the ACT Government to support further large-scale renewable energy development as part of its greenhouse gas reduction strategy which is underpinned by a 90-per cent-by-2020 renewable energy target. - Highlights: • Evolution of the reverse auction process in the Australian Capital Territory. • Analysis of the outcomes of the first Australian feed-in tariff reverse auction. • Identification of the major drivers of the low FiT prices achieved in the auction. • Identification of major issues that emerged in the auction

Pressure-induced three-dimensional ferromagnetic correlations in the giant magnetocaloric compound Gd.sub.5./sub.Ge.sub.4./sub..

Czech Academy of Sciences Publication Activity Database

Magen, C.; Arnold, Zdeněk; Morellon, L.; Skorokhod, Yuriy; Algarabel, P. A.; Ibarra, M. R.; Kamarád, Jiří

2003-01-01

Roč. 91, č. 20 (2003), s. 207202-1 - 207202-4 ISSN 0031-9007 R&D Projects: GA ČR GA106/02/0943 Grant - others:CICYT(ES) MAT2000-1756 Institutional research plan: CEZ:AV0Z1010914 Keywords : magneto-caloric compounds * pressure effect * magnetism Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 7.035, year: 2003

Cascade of Quantum Transitions and Magnetocaloric Anomalies in an Open Nanowire

Science.gov (United States)

Val'kov, V. V.; Mitskan, V. A.; Shustin, M. S.

2017-12-01

A sequence of magnetocaloric anomalies occurring with the change in a magnetic field H is predicted for an open nanowire with the Rashba spin-orbit coupling and the induced superconducting pairing potential. The nature of such anomalies is due to the cascade of quantum transitions related to the successive changes in the fermion parity of the nanowire ground state with the growth of the magnetic field. It is shown that the critical H c values fall within the parameter range corresponding to the nontrivial values of the Z 2 topological invariant of the corresponding 1D band Hamiltonian characteristic of the D symmetry class. It is demonstrated that such features in the behavior of the open nanowire are retained even in the presence of Coulomb interactions.

Magnetocaloric response of La 0.70 Ca 0.1 Sr 0.2 Fe 0.1 Mn 0.9 O 3 ...

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science; Volume 38; Issue 1. Magnetocaloric response of La0.70Ca0.1Sr0.2Fe0.1Mn0.9O3 pervoskite for magnetic refrigeration. M S Anwar Faheem Ahmed Bon Heun Koo. Volume 38 Issue 1 February 2015 pp 101-104 ...

Ageing effect on the magnetocaloric properties of Gd, Gd5Si1.9Ge2.1 and on the eutectic composition Gd75Cd25

International Nuclear Information System (INIS)

Canepa, F; Cirafici, S; Napoletano, M; Cimberle, M R; Tagliafico, L; Scarpa, F

2008-01-01

The ageing effects due to the interaction with typical working fluids (water and air) of magnetic refrigerant materials have been analysed for up to one year. Among the many compounds reported to exhibit a sufficiently high magnetocaloric effect, we decided to artificially age Gd, which represents the first choice high magnetocaloric element, Gd 5 Si 1.9 Ge 2.1 , belonging to the series Gd 5 (Si x Ge 4-x ) 4 which for x ∼ 0.5 displays a giant magnetocaloric effect, and finally, the eutectic Gd 75 Cd 25 alloy, presenting an almost constant adiabatic temperature rise in an interesting temperature span (260-280 K). Magnetothermal results give evidence that corrosion and corrosion/erosion processes take place with different results on the refrigerant properties of all the materials. The adiabatic temperature rise is strongly reduced due to surface oxidation which lowers thermal conduction while the effect on the refrigerant capacity Q is definitely smaller. The effects of corrosion/erosion processes are confirmed by quantitative chemical analysis performed on the refrigerant fluid before and after the ageing process. Employing working fluids with a reduced corrosive effect but with comparable thermal properties may be a viable way of avoiding corrosion damage; alternatively the use of additives to decrease the corrosive properties of the fluids is strongly suggested

Magnetocaloric properties of Eu{sub 1−x}La{sub x}TiO{sub 3} (0.01 ≤ x ≤ 0.2) for cryogenic magnetic cooling

Energy Technology Data Exchange (ETDEWEB)

Rubi, Km; Midya, A.; Mahendiran, R., E-mail: phyrm@nus.edu.sg [Physics Department, Faculty of Science, National University of Singapore, 2 Science Drive 3, Singapore, Singapore 117551 (Singapore); Maheswar Repaka, D. V.; Ramanujan, R. V. [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, Singapore 639798 (Singapore)

2016-06-28

We report magnetic and magnetocaloric (MCE) properties of polycrystalline Eu{sub 1−x}La{sub x}TiO{sub 3} samples over a wide composition range (0.01 ≤ x ≤ 0.20). It is found that the ground state changes from antiferromagnetic for x = 0.01 (T{sub N} = 5.2 K) to ferromagnetic for x ≥ 0.03 and the ferromagnetic Curie temperature increases from T{sub C} = 5.7 K for x = 0.03 to T{sub C} = 7.9 K for x = 0.20. The x = 0.01 sample shows a large reversible isothermal magnetic entropy change of −ΔS{sub m} = 23 (41.5) J/kg K and adiabatic temperature change of ΔT{sub ad} = 9 (17.2) K around 6.7 K for a field change of μ{sub 0}ΔH = 2 (5) Tesla. Although the peak value of −ΔS{sub m} decreases as La content increases, it is impressive in x = 0.2(−ΔS{sub m} = 31.41 J/kg K at T = 7.5 K for μ{sub 0}ΔH = 5 T). The large value of MCE arises from suppression of the spin entropy associated with the localized moment (J = 7/2) of Eu{sup 2+}:4f{sup 7} ions. This large MCE over a wide compositional range suggests that the Eu{sub 1−x}La{sub x}TiO{sub 3} series could be useful for magnetic cooling below 40 K.

Structural and magnetocaloric properties of (Mn,Fe){sub 2}(P,Si) materials with added nitrogen

Energy Technology Data Exchange (ETDEWEB)

Thang, N.V., E-mail: v.t.nguyen-1@tudelft.nl; Miao, X.F., E-mail: X.F.Miao@tudelft.nl; Dijk, N.H. van, E-mail: N.H.vanDijk@tudelft.nl; Brück, E., E-mail: E.H.Bruck@tudelft.nl

2016-06-15

Amongst magnetic materials that exhibit a giant magnetocaloric effect near room temperature, the (Mn,Fe){sub 2}(P,Si) system is one of the most promising candidates for magnetic refrigeration. Although the (Mn,Fe){sub 2}(P,Si) materials hold many advantages, controlling the magnetic entropy change ΔS{sub m}, the adiabatic temperature change ΔT{sub ad}, the thermal hysteresis and the mechanical stability across the ferromagnetic transition requires a delicate tuning of the composition. This work investigates the addition of nitrogen, as an interstitial or substitutional element, as a new parameter to tune the properties of (Mn,Fe){sub 2}(P,Si) materials. We found that the nitrogen addition results in a decrease of the Curie temperature, consistent with the observed increase in the c/a ratio. The introduction of nitrogen in (Mn,Fe){sub 2}(P,Si) materials also results in a strong enhancement of the mechanical stability. - Highlights: • N-doped materials were synthesized by high-energy ball milling and solid-state reactions. • Nitrogen atoms enter the structure both as substitutional and as interstitial element in (Mn,Fe){sub 2}(P,Si) materials. • Nitrogen addition leads to a decrease in the Curie temperature, while improving the mechanical stability and preserving the magnetocaloric properties. • The origin of the increase in the thermal hysteresis by increasing the N content has been investigated by analyzing the XRD data.

Structure and magnetocaloric properties of La1-xKxMnO3 manganites

International Nuclear Information System (INIS)

Aliev, A.M.; Gamzatov, A.G.; Batdalov, A.B.; Mankevich, A.S.; Korsakov, I.E.

2011-01-01

A technology of obtaining the single-phase ceramic samples of La 1-x K x MnO 3 manganites and the dependence of their structural parameters on the content of potassium has been described. Magnetocaloric effect (MCE) in the obtained samples has been measured by two independent methods: classical direct methodic and a method of magnetic field modulation. The values of MCE obtained by both methods substantially differ. The explanation of the observed divergences is given. The correlation between the level of doping and MCE value has been defined. The value of T C determined by the MCE maximum conforms with the literature data obtained by other methods.

Characteristics of a large reversed field pinch machine, TPE-RX

International Nuclear Information System (INIS)

Yagi, Y.; Shimada, T.; Hirano, Y.; Sekine, S.; Sakakita, H.; Koguchi, H.; Kiyama, S.; Maejima, Y.; Hirota, I.; Hayase, K.; Sato, Y.; Sugisaki, K.; Oyabu, I.; Hasegawa, M.; Yamane, M.; Sato, F.; Kuno, K.; Minato, T.; Kiryu, A.; Takagi, S.; Sako, K.; Kudough, F.; Urata, K.; Orita, J.; Kaguchi, H.; Sago, H.; Ue, K.

1998-01-01

Construction of a new, large reversed field pinch (RFP) machine called TPE-RX was complete at the end of 1997 as a successor of the previous TPE-1RM20 machine at the Electrotechnical Laboratory (ETL). RFP configuration has been successfully obtained in March 1998. The optimization of the operating condition and discharge cleaning of the wall are presently undergoing with the first physics experiments. This paper is the first report of TPE-RX especially on the goals, overall machine characteristics and the present status. Other papers accompanying with this one will present specific topics on the magnetic coil system and the vacuum vessel system. (author)

Characteristics of a large reversed field pinch machine, TPE-RX

Energy Technology Data Exchange (ETDEWEB)

Yagi, Y.; Shimada, T.; Hirano, Y.; Sekine, S.; Sakakita, H.; Koguchi, H.; Kiyama, S.; Maejima, Y.; Hirota, I.; Hayase, K.; Sato, Y.; Sugisaki, K. [Electrotechnical Lab., Tsukuba-shi, Ibaraki (Japan); Oyabu, I.; Hasegawa, M.; Yamane, M.; Sato, F.; Kuno, K.; Minato, T.; Kiryu, A.; Takagi, S.; Sako, K. [Mitsubishi Electric Corp. (Japan); Kudough, F.; Urata, K.; Orita, J.; Kaguchi, H.; Sago, H.; Ue, K. [Mitsubishi Heavy Industries Ltd. (Japan)

1998-07-01

Construction of a new, large reversed field pinch (RFP) machine called TPE-RX was complete at the end of 1997 as a successor of the previous TPE-1RM20 machine at the Electrotechnical Laboratory (ETL). RFP configuration has been successfully obtained in March 1998. The optimization of the operating condition and discharge cleaning of the wall are presently undergoing with the first physics experiments. This paper is the first report of TPE-RX especially on the goals, overall machine characteristics and the present status. Other papers accompanying with this one will present specific topics on the magnetic coil system and the vacuum vessel system. (author)

A Magnetocaloric Pump for Lab-On-Chip Technology: Phase I Report

Energy Technology Data Exchange (ETDEWEB)

Love, L.J.

2004-04-05

A magnetocaloric pump provides a simple means of pumping fluid using only external thermal and magnetic fields. The principle, which can be traced back to the early work of Rosensweig, is straightforward. Magnetic materials tend to lose their magnetization as the temperature approaches the material's Curie point. Exposing a column of magnetic fluid to a uniform magnetic field coincident with a temperature gradient produces a pressure gradient in the magnetic fluid. As the fluid heats up, it loses its attraction to the magnetic field and is displaced by cooler fluid. The impact of such a phenomenon is obvious: fluid propulsion with no moving mechanical parts. Until recently, limitations in the magnetic and thermal properties of conventional materials severely limited practical operating pressure gradients. However, recent advancements in the design of metal substituted magnetite enable fine control over both the magnetic and thermal properties of magnetic nanoparticles, a key element in colloidal based magnetic fluids (ferrofluids). This manuscript begins with a basic description of the process and previous limitations due to material properties. This is followed by a review of existing methods of synthesizing magnetic nanoparticles as well as an introduction to a new approach based on thermophilic metal-reducing bacteria. We compare two compounds and show, experimentally, significant variation in specific magnetic and thermal properties. We develop the constitutive thermal, magnetic, and fluid dynamic equations associated with magnetocaloric pump and validate our finite element model with a series of experiments. Preliminary results show a good match between the model and experiment as well as approximately an order of magnitude increase in the fluid flow rate over conventional magnetite based ferrofluids operating below 80 C. Finally, as a practical demonstration, we describe a novel application of this technology: pumping fluids at the &apos

Influence of manganite powder grain size and Ag-particle coating on the magnetocaloric effect and the active magnetic regenerator performance

DEFF Research Database (Denmark)

Turcaud, J.A.; Neves Bez, Henrique; Ruiz-Trejo, E.

2015-01-01

The magnetocaloric performance of La0.67Ca0.27Sr0.06Mn1.05O3 is investigated as a function of the powder grain size and also as a function of decoration of grains with highly conductive silver particulates as a coating layer. We demonstrate that the thermal and electrical conductivities can be si...

Direct and indirect measurement of the magnetocaloric effect in a La0.6Ca0.4MnO3 ceramic perovskite

DEFF Research Database (Denmark)

Dinesen, A.R.; Linderoth, Søren; Mørup, Steen

2002-01-01

The adiabatic temperature change DeltaT(ad) due to a change of the external magnetic field (the magnetocaloric effect) for a perovskite-type La0.6Ca0.4MnO3 sample has been measured directly and indirectly (from the entropy change) and the results are compared. From the indirect method, involving...

The effect of adding aluminum and iron to Tb–Dy–Ho–Co multicomponent alloys on their structure and magnetic and magnetocaloric properties

Czech Academy of Sciences Publication Activity Database

Politova, G.A.; Burkhanov, G.S.; Tereshina, I. S.; Kaminskaya, T.; Chzhan, V.B.; Tereshina, Evgeniya

2017-01-01

Roč. 62, č. 4 (2017), s. 577-582 ISSN 1063-7842 Institutional support: RVO:68378271 Keywords : multicomponent alloys * Laves phase compounds * magnetocaloric effect Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 0.632, year: 2016

A pathway to optimize the properties of magnetocaloric Mn_2_-_xFe_xP_1_-_yGe_y for magnetic refrigeration

International Nuclear Information System (INIS)

Liu, D.M.; Zhang, Z.L.; Zhou, S.L.; Huang, Q.Z.; Deng, X.J.; Yue, M.; Liu, C.X.; Zhang, J.X.; Lynn, J.W.

2016-01-01

Magnetocaloric materials can be useful in magnetic refrigeration applications, but to be practical the magneto-refrigerant needs to have a very large magnetocaloric effect (MCE) near room temperature for modest applied fields (<2 T) with small hysteresis and magnetostriction, and should have a complete magnetic transition, and environmentally friendly. One system that may fulfill these requirements is Mn_2_-_xFe_xP_1_-_yGe_y, where a combined first-order structural and magnetic transition occurs between the high temperature paramagnetic and low temperature ferromagnetic phase. We have used neutron diffraction, differential scanning calorimetry, and magnetization measurements to study the effects of Mn and Ge location in the structure on the ordered magnetic moment, MCE, and hysteresis for a series of compositions of the system near optimal doping. The diffraction results indicate that the Mn ions located on the 3f site enhance the desirable properties, while those located on the 3 g sites are detrimental. The phase fraction that transforms, hysteresis of the transition, and entropy change can be affected greatly by both the compositional homogeneity and the particle size, and an annealing procedure has been developed that substantially improves the performance of all three properties of the material. We also establish a correlation between applied magnetic field to complete the transition and the temperature range of coexistence of the PM and FM phase. On the basis of these results we have identified a pathway to understand the nature and to optimize the MCE properties of this system for magnetic refrigeration applications. - Highlights: • Compositional homogeneity and particle size affect the MCE properties. • Mn ions located on the 3f site enhance the desirable MCE properties. • A pathway to understand the nature and to optimize the MCE properties was identified.

Magnetocaloric properties of Nd.sub.5./sub.Si.sub.1.45./sub.Ge.sub.2.55./sub. compound under high hydrostatic pressure

Czech Academy of Sciences Publication Activity Database

Skorokhod, Yuriy; Arnold, Zdeněk; Kamarád, Jiří; Morellon, L.; Magen, C.

2006-01-01

Roč. 26, č. 4 (2006), s. 495-498 ISSN 0895-7959 R&D Projects: GA ČR(CZ) GA106/06/0368 Institutional research plan: CEZ:AV0Z10100521 Keywords : magnetocaloric effect * magnetic properties * pressure effect Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.228, year: 2006

Correction: Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4

DEFF Research Database (Denmark)

Jensen, Søren Højgaard; Graves, Christopher R.; Mogensen, Mogens Bjerg

2017-01-01

Correction for ‘Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4’ by S. H. Jensen et al., Energy Environ. Sci., 2015, 8, 2471–2479.......Correction for ‘Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4’ by S. H. Jensen et al., Energy Environ. Sci., 2015, 8, 2471–2479....

Synthetically chemical-electrical mechanism for controlling large scale reversible deformation of liquid metal objects

Science.gov (United States)

Zhang, Jie; Sheng, Lei; Liu, Jing

2014-11-01

Reversible deformation of a machine holds enormous promise across many scientific areas ranging from mechanical engineering to applied physics. So far, such capabilities are still hard to achieve through conventional rigid materials or depending mainly on elastomeric materials, which however own rather limited performances and require complicated manipulations. Here, we show a basic strategy which is fundamentally different from the existing ones to realize large scale reversible deformation through controlling the working materials via the synthetically chemical-electrical mechanism (SCHEME). Such activity incorporates an object of liquid metal gallium whose surface area could spread up to five times of its original size and vice versa under low energy consumption. Particularly, the alterable surface tension based on combination of chemical dissolution and electrochemical oxidation is ascribed to the reversible shape transformation, which works much more flexible than many former deformation principles through converting electrical energy into mechanical movement. A series of very unusual phenomena regarding the reversible configurational shifts are disclosed with dominant factors clarified. This study opens a generalized way to combine the liquid metal serving as shape-variable element with the SCHEME to compose functional soft machines, which implies huge potential for developing future smart robots to fulfill various complicated tasks.

Glass formation, magnetic properties and magnetocaloric effect of ternary Ho–Al–Co bulk metallic glass

International Nuclear Information System (INIS)

Zhang, Huiyan; Li, Ran; Ji, Yunfei; Liu, Fanmao; Luo, Qiang; Zhang, Tao

2012-01-01

A ternary Ho–Al–Co system with high glass-forming ability (GFA) was developed and fully glassy rods with diameters up to 1 cm can be produced for the best glass former of Ho 55 Al 27.5 Co 17.5 alloy. The thermal stability and low-temperature magnetic properties of the Ho 55 Al 27.5 Co 17.5 bulk metallic glass (BMG) were studied. The magnetic transition temperature of this alloy is ∼14 K as determined by the thermomagnetic measurement. Two indicators, i.e. isothermal magnetic entropy change (ΔS M ) and the relative cooling power (RCP), were adopted to evaluate the magnetocaloric effect (MCE) of the alloy under a low magnetic field up to 2 T, which can be generated by permanent magnets. The values of |ΔS M | and RCP are 7.98 J kg −1 K −1 and 191.5 J kg −1 , respectively. The Ho 55 Al 27.5 Co 17.5 BMG with good MCE and high GFA provides an attractive candidate for magnetic refrigeration applications, like hydrogen liquefaction and storage. - Highlights: ► A ternary Ho–Al–Co BMG system with high glass-forming ability was developed. ► Fully glassy rods of Ho 55 Al 27.5 Co 17.5 alloy were produced up to 1 cm in diameter. ► The thermal stability and magnetic properties of the BMG were evaluated. ► The BMG exhibits good magnetocaloric effect under a low magnetic field up to 2 T.

Table-like magnetocaloric effect of Fe{sub 88−x}Nd{sub x}Cr{sub 8}B{sub 4} composite materials

Energy Technology Data Exchange (ETDEWEB)

Lai, J.W.; Zheng, Z.G.; Zhong, X.C. [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Franco, V. [Departamento Física de la Materia Condensada, ICMSE-CSIC, Universidad de Sevilla, P.O. Box 1065, 41080 Sevilla (Spain); Montemayor, R.; Liu, Z.W. [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Zeng, D.C., E-mail: medczeng@scut.edu.cn [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China)

2015-09-15

The narrow working temperature range due to the sharp magnetic entropy change |ΔS{sub M}| peak and large thermal or magnetic hysteresis restricts the practical application of magnetocaloric materials. In this work, the table-like magnetocaloric effect (MCE) was obtained in the multilayer composite of Fe{sub 88−x}Nd{sub x}Cr{sub 8}B{sub 4} alloys with various Nd substitutions for Fe (x=5, 8, 10, 12, and 15), which were prepared by arc-melting followed by melt-spinning. The substation of Nd was found to enhance the glass-forming ability. For the alloys with Nd substitution from 5 at% to 15 at%, the Curie temperature (T{sub C}) ranged from 322 K to 350 K and the peak value of |ΔS{sub M}| remained almost constant, 3.4–3.5 J/(kg K) under an applied field of 0–5 T. The composite with various Nd contents was prepared by stocking the ribbons layer by layer. The |ΔS{sub M}| of the composite approached a nearly constant value of ∼3.2 J/(kg K) in a field change of 0–5 T in a wide temperature span over 40 K, resulting in large refrigerant capacity value of >408 J/kg. This |ΔS{sub M}| value was much larger than the previous reported Fe-based amorphous composite Fe{sub 78−x}Ce{sub x}Si{sub 4}Nb{sub 5}B{sub 12}Cu{sub 1}. This composite can be used as the working material in the Ericsson-cycle magnetic regenerative refrigerator around room temperature. - Highlights: • The T{sub C} ranges from 322 K to 350 K when increasing Nd substitution from 5 to 15 at%. • |ΔS{sub M}| remains relatively constant, about 3.4–3.5 J/(kg K) under H=0–5 T. • RC decreases from 93 to 78 J/kg in a field change of 1.5 T when Nd increasing. • Table-like MCE ,|ΔS{sub M}| ~3.2J/kg K under 0–5 T, appeared in the composite. • A wide working temperature range (40 K) and enhanced RC (>408J/kg) were obtained in the composite.

The correlation of the magnetic properties and the magnetocaloric effect in (Gd1-xErx)NiAl alloys

International Nuclear Information System (INIS)

Korte, B.J.; Pecharsky, V.K.; Gschneidner, K.A. Jr.

1998-01-01

A study of the magnetic properties of several (Gd 1-x Er x )NiAl alloys (where x=0, 0.30, 0.40, 0.46, 0.50, 0.55, 0.60, 0.80, and 1.00) was undertaken using both ac and dc magnetic and heat capacity measurements in an attempt to understand the table-like magnetocaloric effect previously observed in (Gd 0.54 Er 0.46 )NiAl. Results indicate the presence of both antiferromagnetic and ferromagnetic ordering processes in all alloys containing Gd. For ErNiAl, a metamagnetic transition from an antiferromagnetic ground state was observed. Within each alloy, several magnetic transitions occur over a temperature range from 10 K [in (Gd 0.20 Er 0.80 )NiAl] up to 35 K (in GdNiAl), with all but the lowest temperature transition shifting to higher temperatures with increasing Gd content. The change in magnetic entropy (ΔS mag ) induced by a change in field is observed to peak around the Nacute eel temperature for ErNiAl while gradually broadening and shifting toward the Curie temperature as the Gd content is increased. For Gd-rich alloys, a significant contribution to ΔS mag is observed at both the low and high temperature transitions, resulting in a rounded, skewed caret-like temperature profile of the magnetocaloric effect. Factors, which are believed to contribute to this effect, include the presence and temperature spacing of multiple zero-field transitions, which most likely result from competing anisotropy and exchange interactions within a frustrated hexagonal spin lattice. This leads to broad peaks in the magnetic heat capacity that span several transition temperatures, providing for a substantial ΔS mag over an extended temperature range. This characteristic is desired for application to magnetic refrigeration, where certain thermodynamic cycles (e.g., Ericsson cycle) require specific temperature profiles of the magnetocaloric effect in refrigerant materials (e.g., a constant change in magnetic entropy as a function of temperature within the region of cooling). In

A Magnetocaloric Pump for Lab-On-A-Chip Technology: Phase I Report

Energy Technology Data Exchange (ETDEWEB)

Love, LJL

2004-05-08

A magnetocaloric pump provides a simple means of pumping fluid using only external thermal and magnetic fields. The principle, which can be traced back to the early work of Rosensweig, is straightforward. Magnetic materials tend to lose their magnetization as the temperature approaches the material's Curie point. Exposing a column of magnetic fluid to a uniform magnetic field coincident with a temperature gradient produces a pressure gradient in the magnetic fluid. As the fluid heats up, it loses its attraction to the magnetic field and is displaced by cooler fluid. The impact of such a phenomenon is obvious: fluid propulsion with no moving mechanical parts. Until recently, limitations in the magnetic and thermal properties of conventional materials severely limited practical operating pressure gradients. However, recent advancements in the design of metal substituted magnetite enable fine control over both the magnetic and thermal properties of magnetic nanoparticles, a key element in colloidal based magnetic fluids (ferrofluids). This manuscript begins with a basic description of the process and previous limitations due to material properties. This is followed by a review of existing methods of synthesizing magnetic nanoparticles as well as an introduction to a new approach based on thermophilic metal-reducing bacteria. We compare two compounds and show, experimentally, significant variation in specific magnetic and thermal properties. We develop the constitutive thermal, magnetic, and fluid dynamic equations associated with magnetocaloric pump and validate our finite element model with a series of experiments. Preliminary results show a good match between the model and experiment as well as approximately an order of magnitude increase in the fluid flow rate over conventional magnetite based ferrofluids operating below 80 C. Finally, as a practical demonstration, we describe a novel application of this technology: pumping fluids at the &apos

Cost-Effectiveness of Reverse Total Shoulder Arthroplasty Versus Arthroscopic Rotator Cuff Repair for Symptomatic Large and Massive Rotator Cuff Tears.

Science.gov (United States)

Makhni, Eric C; Swart, Eric; Steinhaus, Michael E; Mather, Richard C; Levine, William N; Bach, Bernard R; Romeo, Anthony A; Verma, Nikhil N

2016-09-01

To compare the cost-effectiveness within the United States health care system of arthroscopic rotator cuff repair versus reverse total shoulder arthroplasty in patients with symptomatic large and massive rotator cuff tears without cuff-tear arthropathy. An expected-value decision analysis was constructed comparing the costs and outcomes of patients undergoing arthroscopic rotator cuff repair and reverse total shoulder arthroplasty for large and massive rotator cuff tears (and excluding cases of cuff-tear arthropathy). Comprehensive literature search provided input data to extrapolate costs and health utility states for these outcomes. The primary outcome assessed was that of incremental cost-effectiveness ratio (ICER) of reverse total shoulder arthroplasty versus rotator cuff repair. For the base case, both arthroscopic rotator cuff repair and reverse total shoulder were superior to nonoperative care, with an ICER of $15,500/quality-adjusted life year (QALY) and $37,400/QALY, respectively. Arthroscopic rotator cuff repair was dominant over primary reverse total shoulder arthroplasty, with lower costs and slightly improved clinical outcomes. Arthroscopic rotator cuff repair was the preferred strategy as long as the lifetime progression rate from retear to end-stage cuff-tear arthropathy was less than 89%. However, when the model was modified to account for worse outcomes when reverse shoulder arthroplasty was performed after a failed attempted rotator cuff repair, primary reverse total shoulder had superior outcomes with an ICER of $90,000/QALY. Arthroscopic rotator cuff repair-despite high rates of tendon retearing-for patients with large and massive rotator cuff tears may be a more cost-effective initial treatment strategy when compared with primary reverse total shoulder arthroplasty and when assuming no detrimental impact of previous surgery on outcomes after arthroplasty. Clinical judgment should still be prioritized when formulating treatment plans for these

Magnetic Properties and Magnetocaloric Effect in Layered NdMn1.9Ti0.1Si2

Directory of Open Access Journals (Sweden)

M.F. Md Din

2014-04-01

Full Text Available The structural and magnetic properties of the NdMn1.9Ti0.1Si2 compund have been studied by high-intensity x-ray and high-resolution neutron powder diffraction, specific heat, dc magnetization, and differential scanning calorimetry measurements over the temperature range of 3-450 K. The Curie temperature and Néel temperature of layered NdMn1.9Ti0.1Si2 are indicated as TC ~ 22 K and TN ~ 374 K respectively. The first order magnetic transition from antiferromagnetic [AFil-type] to ferromagnetic [F(Nd+Fmc] around TC is found in layered NdMn1.9Ti0.1Si2 and is associated with large magnetocaloric effect. This behavior has been confirmed as a contribution of the magnetostructural coupling by using neutron and x-ray powder diffraction. The magnetic entropy change –ΔSM ~ 15.3 J kg-1 K-1 and adiabatic temperature change ΔTad ~ 4.7 K have been determined using magnetization and specific heat measurement under 0-5 T applied fields. This compound exhibits almost no thermal and magnetic hysteresis, thus potentially applicable in low temperature region for magnetic refrigerator material

Magnetocaloric properties of rapidly solidified Dy{sub 3}Co alloy ribbons

Energy Technology Data Exchange (ETDEWEB)

Sánchez Llamazares, J. L., E-mail: jose.sanchez@ipicyt.edu.mx; Flores-Zúñiga, H.; Sánchez-Valdés, C. F. [Instituto Potosino de Investigación Científica y Tecnológica A.C., Camino a la Presa San José 2055 Col. Lomas 4" a, San Luis Potosí, S.L.P. 78216 (Mexico); Álvarez-Alonso, Pablo [Departamento de Electricidad y Electrónica, UPV/EHU, 48940 Leioa (Spain); Lara Rodríguez, G. A. [Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito Exterior s/n, Ciudad Universitaria, México, D. F. 04510 (Mexico); Fernández-Gubieda, M. L. [Departamento de Electricidad y Electrónica, UPV/EHU, 48940 Leioa (Spain); BC Materials, Camino de Ibaizabal, Edificio 500, Planta 1, Parque Científico y Tecnológico de Zamudio, 48160 Derio (Spain)

2015-05-07

The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy{sub 3}Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms{sup −1}. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe{sub 3}C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at T{sub N} = 43 K. Furthermore, a metamagnetic transition is observed below T{sub N}, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔS{sub M}{sup peak} of −6.5 (− 2.1) Jkg{sup −1}K{sup −1} occurring close to T{sub N} with a full-width at half-maximum δT{sub FWHM} of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg{sup −1} (estimated from the product |ΔS{sub M}{sup peak}| × δT{sub FWHM})

Influence of Fe doped on the magnetocaloric behavior of La_{{2}/{3}} Ca_{{1}/{3}} Mn1-x Fe x O3 compounds: a Monte Carlo simulation

Science.gov (United States)

Alzate-Cardona, J. D.; Barco-Rios, H.; Restrepo-Parra, E.

2018-02-01

The magnetocaloric behavior of La{2/{3}} Ca{1/{3}} Mn1-x Fe x O3 for x  =  0.00, 0.02, 0.03, 0.05, 0.07, 0.08 and 0.10 under the influence of an external magnetic field was simulated and analyzed. Simulations were carried out using the Monte Carlo method and the classical Heisenberg model under the Metropolis algorithm. These mixed valence manganites are characterized by having three types of magnetic ions corresponding to Mn4+≤ft(S=\\frac{3}{2}\\right) , which are bonded with Ca2+ , and Mneg3+ and Mneg\\prime3+ (S=2) , related to La3+ . The Fe ions were randomly included, replacing Mn ions. With this model, the magnetic entropy change, Δ S , in an isothermal process was determined. -Δ Sm showed maximum peaks around the paramagnetic-ferromagnetic transition temperature, which depends on Fe doping. Relative cooling power was computed for different Fe concentrations varying the magnetic applied field. Our model and results show that the Fe doping decreases the magnetocaloric effect in the La{2/{3}} Ca{1/{3}} Mn1-x Fe x O3, making this a bad candidate for magnetic refrigeration. The strong dependence of the magnetocaloric behavior on Fe doping and the external magnetic field in La{2/{3}} Ca{1/{3}} Mn1-x Fe x O3 can boost these materials for the future technological applications.

The influence of non-magnetocaloric properties on the performance in parallel-plate AMRs

DEFF Research Database (Denmark)

Nielsen, Kaspar Kirstein; Bahl, Christian R.H.; Smith, Anders

2014-01-01

a strong dependence on the orientation of the applied field and the regenerator geometry. Finally, the flow maldistribution of non-uniform regenerator geometries is found to degrade the AMR performance even at minor deviations from perfectly homogeneous regenerator matrices. This paper reflects a summary......The performance of Active Magnetic Regenerators (AMR) does not depend solely on the magnetocaloric effect of their constituents. Rather, it depends on several additional parameters, including, magnetic field, geometry (hydraulic diameter, cross-sectional area, regenerator length etc.), thermal...... properties (conductivity, specific heat and mass density) and operating parameters (utilization, frequency, number of transfer units etc.). In this paper we focus on the influence of three parameters on regenerator performance: 1) Solid thermal conductivity, 2) magnetostatic demagnetization and 3) flow...

Enhanced magnetocaloric properties and critical behavior of (Fe0.72Cr0.28)3Al alloys for near room temperature cooling

Science.gov (United States)

Sharma, V.; Maheshwar Repaka, D. V.; Chaudhary, V.; Ramanujan, R. V.

2017-04-01

Magnetic cooling is an environmentally friendly, energy efficient, thermal management technology relying on high performance magnetocaloric materials (MCM). Current research has focused on low cost, corrosion resistant, rare earth (RE) free MCMs. We report the structural and magnetocaloric properties of novel, low cost, RE free, iron based (Fe0.72Cr0.28)3Al alloys. The arc melted buttons and melt spun ribbons possessed the L21 crystal structure and B2 crystal structure, respectively. A notable enhancement of 33% in isothermal entropy change (-ΔS m) and 25% increase in relative cooling power (RCP) for the ribbons compared to the buttons can be attributed to higher structural disorder in the Fe-Cr and Fe-Al sub-lattices of the B2 structure. The critical behavior was investigated using modified Arrott plots, the Kouvel-Fisher plot and the critical isotherm technique; the critical exponents were found to correspond to the short-range order 3D Heisenberg model. The field and temperature dependent magnetization curves of (Fe0.72Cr0.28)3Al alloys revealed their soft magnetic nature with negligible hysteresis. Thus, these alloys possess promising performance attributes for near room temperature magnetic cooling applications.

Determination of the magnetocaloric entropy change in the presence of phase separation and metastability: The case of Eu0.58Sr0.42MnO3

International Nuclear Information System (INIS)

Guillou, F.; Hardy, V.; Fruchart, D.; Zawilski, B.

2014-01-01

The magnetocaloric effect (MCE) in the manganite Eu 0.58 Sr 0.42 MnO 3 was derived by different methods, in a field range very sensitive to the phenomenon of phase separation. It turns out that a strong scatter in the MCE features was observed. When the applied field is less than the field required to complete the transition, it is found that the MCE can be strongly overestimated by “standard” indirect measurements. A way to properly estimate the MCE around a first order transition in the presence of phase separation and metastability is proposed. - Highlights: • The entropy change was investigated in an oxide with pronounced metastable effects. • A strong scatter is observed among results derived from several indirect methods. • It is found that even the calorimetric approach can be proned to artefacts. • A method is proposed to evaluate a “real” magnetocaloric entropy change

Room temperature magnetocaloric effect in Ni-Mn-In-Cr ferromagnetic shape memory alloy thin films

Energy Technology Data Exchange (ETDEWEB)

Akkera, Harish Sharma [Functionalnanomaterials Research Lab, Department of Physics, Indian Institute of Technology Roorkee, Uttarakhand-247667 (India); Singh, Inderdeep [Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, Uttarakhand-24667 (India); Kaur, Davinder, E-mail: dkaurfph@iitr.ernet.in [Functionalnanomaterials Research Lab, Department of Physics, Indian Institute of Technology Roorkee, Uttarakhand-247667 (India)

2017-02-15

The influence of Cr substitution for In on the martensitic phase transformation and magnetocaloric effect (MCE) has been investigated in Ni-Mn-Cr-In ferromagnetic shape memory alloy (FSMA) thin films fabricated by magnetron sputtering. Temperature dependent magnetization (M-T) measurements demonstrated that the martensitic transformation temperatures (T{sub M}) monotonously increase with the increase of Cr content due to change in valence electron concentration (e/a) and cell volume. From the study of isothermal magnetization curves (M-H), magnetocaloric effect around the martensitic transformation has been investigated in these FSMA thin films. The magnetic entropy change ∆S{sub M} of 7.0 mJ/cm{sup 3}-K was observed in Ni{sub 51.1}Mn{sub 34.9}In{sub 9.5}Cr{sub 4.5} film at 302 K in an applied field of 2 T. Further, the refrigerant capacity (RC) was also calculated for all the films in an applied field of 2 T. These findings indicate that the Cr doped Ni-Mn-In FSMA thin films are potential candidates for room temperature micro-length-scale magnetic refrigeration applications. - Highlights: • The Cr content leads to an increase in the martensitic transformation temperature. • The ∆S{sub M} =7 mJ/cm{sup 3}-K at 302 K was observed in the Ni{sub 51.1}Mn{sub 34.9}In{sub 9.5}Cr{sub 4.5}. • The RC =39.2 mJ/K at 2 T was obtained in Ni{sub 51.1}Mn{sub 34.9}In{sub 9.5}Cr{sub 4.5} film.

Thermodynamics of the Heat-Flux Avalanches at the First-Order Magnetic Transition in Magnetocaloric Materials

Science.gov (United States)

Piazzi, Marco; Bennati, Cecilia; Basso, Vittorio

2017-10-01

We investigate the kinetics of first-order magnetic phase transitions by measuring and modeling the heat-flux avalanches corresponding to the irreversible motion of the phase-boundary interface separating the coexisting low- and high-temperature stable magnetic phases. By means of out-of-equilibrium thermodynamics, we encompass the damping mechanisms of the boundary motion in a phenomenological parameter αs. By analyzing the time behavior of the heat-flux signals measured on La (Fe -Mn -Si )13-H magnetocaloric compounds through Peltier calorimetry temperature scans performed at low rates, we relate the linear rise of the individual avalanches to the intrinsic-damping parameter αs.

Enhancement of Magnetocaloric Effect in ({ {La}}_{0.67}{ {Ca}}_{0.33}{ {MnO}}_{3})/({ {La}}_{0.7}{ {Ba}}_{0.3}{ {MnO}}_{3}) ( La 0.67 Ca 0.33 MnO 3 ) / ( La 0.7 Ba 0.3 MnO 3 ) Composite

Science.gov (United States)

Khelifi, J.; Dhahri, E.; Hlil, E. K.

2018-03-01

The composite (La_{0.67}Ca_{0.33}MnO3)/La_{0.7}Ba_{0.3}MnO3) sample was prepared using the conventional solid-state reaction method, and their crystallographic structure was achieved by X-ray diffraction pattern analysis. The magnetic and magnetocaloric effect has been studied by magnetization measurements. Based on the relation: χ ^{-1}(T)∝ (T-T_C^Rand )^{1-λ }, the inverse of susceptibility shows a downturn before T_C indicating the existence of Griffiths phase for the temperature range T_C^Randphase has been obtained from detailed magnetization studies. Furthermore, a large magnetic entropy change is observed in (La_{0.67}Ca_{0.33}MnO3)/(La_{0.7}Ba_{0.3}MnO3) composite which possesses a large MCE characterized by two Δ S_M(T) peaks. It has revealed that the combination of manganite materials with different Curie temperatures is a possible method for enhancement of magnetocaloric effect. To determine the field dependence of the experimental Δ S_M(T), a local exponent n( T, H) can be calculated from the logarithmic derivative of the magnetic entropy change versus field; it is shown that for a multiphase system n evolves with field both at the Curie temperature of the system and at the Curie temperatures of the constituent phases.

The effects of small metal additions (Co, Cu, Ga, Mn, Al, Bi, Sn) on the magnetocaloric properties of the Gd5Ge2Si2 alloy

Czech Academy of Sciences Publication Activity Database

Shull, R. D.; Provenzano, V.; Shapiro, A. J.; Fu, A.; Lufaso, M. W.; Karapetrova, J.; Kletetschka, Günther; Mikula, V.

2006-01-01

Roč. 99, č. 8 (2006), s. 8-8 ISSN 0021-8979 Institutional research plan: CEZ:AV0Z30130516 Keywords : magnetocaloric * (Co, Cu, Ga, Mn, Al, Bi, Sn) additions * Cryogenic properties Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.316, year: 2006

Study of magnetic, structural and magnetocaloric properties of La{sub 0.6}Pr{sub 0.4}Mn{sub 2}Si{sub 2} under high pressures and magnetic field

Energy Technology Data Exchange (ETDEWEB)

Kaštil, J., E-mail: kastil@fzu.cz [Institute of Physics AS CR v.v.i., Na Slovance 2, 182 21 Prague 8 (Czech Republic); Arnold, Z. [Institute of Physics AS CR v.v.i., Na Slovance 2, 182 21 Prague 8 (Czech Republic); Isnard, O. [Centre national de la recherche scientifique (CNRS), Institut Néel, 25 rus des martyrs, F-38042 Grenoble (France); Université Grenoble Alpes, Institut Néel, F-38042 Grenoble (France); Skourski, Y. [Hochfeld-Magnetlabor Dresden (HLD), HZ Dresden-Rossendorf, D-01314 Dresden (Germany); Kamarád, J. [Institute of Physics AS CR v.v.i., Na Slovance 2, 182 21 Prague 8 (Czech Republic); Itié, J.P. [Synchrotron SOLEIL, L' Orme des Merisiers, Saint-Aubin, 91192 Gif-sur-Yvette (France)

2017-02-15

The structural, magnetic and magnetocaloric properties of La{sub 0.6}Pr{sub 0.4}Mn{sub 2}Si{sub 2} compound were measured in wide range of temperature, magnetic field and hydrostatic pressure. The structural study up to 10 GPa confirmed the existence of critical Mn-Mn distance 0.2883 nm for the ferromagnetic to antiferromagnetic transition at room temperature. The results demonstrated the crucial role of the volume in the suppression of the ferromagnetic phase above the transition temperature T{sub 1}=168 K under pressure. The huge pressure shift of the transition temperature T{sub 1}, dT{sub 1}/dp=230 K/GPa, was observed. Based on our magnetization measurement the low temperature transition at T{sub 2}=30 K is connected with reorientation of Mn moment and the rare-earth sublattice is not ordered in this case. The direct magnetocaloric measurement showed moderate values of the adiabatic temperature change connected with the magnetic transition at T{sub c} and T{sub 1} and confirmed the first order character of the transition at T{sub 1} and second order character of the transition at T{sub c}. - Highlights: • The huge pressure shift of the transition temperature dT{sub 1}/dp=230 K/GPa was observed. • Ferromagnetic order is suppressed by applying pressure of 1 GPa. • The direct magnetocaloric effect showed moderate values of ΔT{sub ad}.

Giant magnetocaloric effect, magnetization plateaux and jumps of the regular Ising polyhedra

International Nuclear Information System (INIS)

Strečka, Jozef; Karľová, Katarína; Madaras, Tomáš

2015-01-01

Magnetization process and adiabatic demagnetization of the antiferromagnetic Ising spin clusters with the shape of regular polyhedra (Platonic solids) are exactly examined within the framework of a simple graph-theoretical approach. While the Ising cube as the only unfrustrated (bipartite) spin cluster shows just one trivial plateau at zero magnetization, the other regular Ising polyhedra (tetrahedron, octahedron, icosahedron and dodecahedron) additionally display either one or two intermediate plateaux at fractional values of the saturation magnetization. The nature of highly degenerate ground states emergent at intermediate plateaux owing to a geometric frustration is clarified. It is evidenced that the regular Ising polyhedra exhibit a giant magnetocaloric effect in a vicinity of magnetization jumps, whereas the Ising octahedron and dodecahedron belong to the most prominent geometrically frustrated spin clusters that enable an efficient low-temperature refrigeration by the process of adiabatic demagnetization

Heat flux measurements of Tb{sub 3}M series (M=Co, Rh and Ru): Specific heat and magnetocaloric properties

Energy Technology Data Exchange (ETDEWEB)

Monteiro, J.C.B., E-mail: jolmiui@gmail.com [Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin, Campinas, SP 13083-859 (Brazil); Lombardi, G.A. [Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin, Campinas, SP 13083-859 (Brazil); Reis, R.D. dos [Max-Planck Institute for Chemical Physics of Solids, Nöthnitzer Str. 40, 01187 Dresden (Germany); Freitas, H.E.; Cardoso, L.P.; Mansanares, A.M.; Gandra, F.G. [Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin, Campinas, SP 13083-859 (Brazil)

2016-12-15

We report on the magnetic properties and magnetocaloric effect (MCE) for the Tb{sub 3}M series, with M=Co, Rh and Ru, obtained using a heat flux technique. The specific heat of Tb{sub 3}Co and Tb{sub 3}Rh are very similar, with a first order type transition occurring around 6 K below the magnetic ordering temperature without any corresponding feature on the magnetization. The slightly enhanced electronic specific heat, the Debye temperature around 150 K and the presence of the magnetic specific heat well above the ordering temperature are also characteristic of many other compounds of the R{sub 3}M family (R=Rare Earth). The specific heat for Tb{sub 3}Ru, however, presents two peaks at 37 K and 74 K. The magnetization shows that below the first peak the system presents an antiferromagnetic behavior and is paramagnetic above 74 K. We obtained a magnetocaloric effect for M=Co and Rh, −∆S=12 J/kg K, but for Tb{sub 3}Ru it is less than 3 J/kg K (μ{sub 0}∆H=5 T). We believe that the experimental results show that the MCE is directly related with the process of hybridization of the (R)5d-(M)d electrons that occurs in the R{sub 3}M materials.

Table-like magnetocaloric effect in Gd–Ni–Al amorphous/nanocrystalline composites

International Nuclear Information System (INIS)

Zheng, Qiang; Zhang, Linlin; Du, Juan

2017-01-01

In this work, Gd–Ni–Al amorphous/nanocrystalline composites produced by melt-spinning method with double magnetocaloric effect (MCE) plateaus have been developed. Two MCE plateaus, ∼4.7 J kg −1 K −1 (90–120 K) and ∼3.60 J kg −1 K −1 (250–275 K), were discovered in Gd 80 Ni 11.6 Al 8.4 for a magnetic field change of 0 to 5 T. For Gd 90 Ni 5.8 Al 4.2 , the plateau values are ∼3.90 J kg −1 K −1 (85–120 K) and ∼6.70 J kg −1 K −1 (265–280 K) for a magnetic field change of 0–5 T. The reason why MCE plateau formation was investigated and discussed. These composites having two MCE plateaus are competitive candidates for the ideal Ericsson cycle. (paper)

Bringing Solid-State Magnetocaloric Cooling to the Market: A Commercialization Plan

Energy Technology Data Exchange (ETDEWEB)

Abu-Heiba, Ahmad [ORNL; Sikes, Karen [CSRA; Blackburn, Julia [CSRA; Abdelaziz, Omar [ORNL; Mehdizadeh Momen, Ayyoub [ORNL

2017-12-01

Air conditioning has become a staple in American life, bringing improved health, productivity, and comfort to 93% of single-family homes as of 2015, compared to only 76% in 1990. This rise in demand has contributed to the 2.51 quads (12.5%) of total annual energy consumption in residential buildings attributable to space cooling (U.S. Energy Information Administration 2017). Accompanying this upward trend in space cooling has been increased refrigerant use, which has historically contributed to ozone depletion, global warming, or both. The Oak Ridge National Laboratory – along with German-based partner Vacuumschmelze GmbH & Co. KG – is working to reduce energy consumption and refrigerant use through the development of a next-generation, solid-state magnetocaloric cooling system. The purpose of this study is to investigate market potential of these systems in the United States, including information on the industry landscape, market share and unit shipment projections, optimal price points, and barriers to market entry.

Effect of Fe substitution on magnetocaloric effect in La0.7Sr0.3Mn1-xFexO3 (0.05≤x≤0.20)

International Nuclear Information System (INIS)

Barik, S.K.; Krishnamoorthi, C.; Mahendiran, R.

2011-01-01

We have studied the effect of Fe substitution on magnetic and magnetocaloric properties in La 0.7 Sr 0.3 Mn 1-x Fe x O 3 (x=0.05, 0.07, 0.10, 0.15, and 0.20) over a wide temperature range (T=10-400 K). It is shown that substitution by Fe gradually decreases the ferromagnetic Curie temperature (T C ) and saturation magnetization up to x=0.15 but a dramatic change occurs for x=0.2. The x=0.2 sample can be considered as a phase separated compound in which both short-range ordered ferromagnetic and antiferromagnetic phases coexist. The magnetic entropy change (-ΔS m ) was estimated from isothermal magnetization curves and it decreases with increase of Fe content from 4.4 J kg -1 K -1 at 343 K (x=0.05) to 1.3 J kg -1 K -1 at 105 K (x=0.2), under ΔH=5 T. The La 0.7 Sr 0.3 Mn 0.93 Fe 0.07 O 3 sample shows negligible hysteresis loss, operating temperature range over 60 K around room temperature with refrigerant capacity of 225 J kg -1 , and magnetic entropy of 4 J kg -1 K -1 which will be an interesting compound for application in room temperature refrigeration. - Research highlights: → We report magnetocaloric effect in La 0.7 Sr 0.3 Mn 1-x Fe x O 3 (x=0-0.2). → Magnetic entropy change (ΔS m ) decreases with increasing x. → A large ΔS m and refrigeration capacity are found around 300 K in x=0.07.

Modelling and simulation of regenerators with complex flow arrangements for active magnetocaloric refrigeration

DEFF Research Database (Denmark)

Lei, Tian; Nielsen, Kaspar Kirstein; Engelbrecht, Kurt

2014-01-01

Compared to a conventional vapor compression refrigera-tion system, a magnetocaloric refrigerator has many advantages, such as potentially high efficiency, low vibration and avoidance of refrigerants that deplete the ozone layer and cause the green-house effect. As a main component of the active...... magnetic re-generative refrigerator, the regenerator plays an important role in the cooling performance and efficiency of the whole system. However, the regenerator design is constrained by several exter-nal factors, such as the geometry of the magnetic field source and flow resistance. In this work, novel...... regenerators with complex flow arrange-ments, providing high performance at lower pressure drop, are investigated. Correspondingly a one dimensional model is pre-sented and comparative studies between novel and conventional regenerators are carried out by simulation. The effect of regen-erator geometries...

Pressure effects in the giant magnetocaloric compounds Gd.sub.5./sub.(Si.sub.x./sub.Ge.sub.1 - x./sub.).sub.4./sub..

Czech Academy of Sciences Publication Activity Database

Morellon, L.; Arnold, Zdeněk; Algarabel, P. A.; Magen, C.; Ibarra, M. R.; Skorokhod, Yuriy

2004-01-01

Roč. 16, - (2004), s. 1623-1630 ISSN 0953-8984 R&D Projects: GA ČR GA106/02/0943 Grant - others:CICYT(ES) MAT2000-1756 Institutional research plan: CEZ:AV0Z1010914 Keywords : magnetocaloric effect * high pressure * Gd 5 Si 4-x Ge x * magnetic transitions Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.049, year: 2004

Tuning of magnetocaloric effect in a La.sub.0.69./sub.Ca.sub.0.31./sub.MnO.sub.3./sub. single crystal by pressure,

Czech Academy of Sciences Publication Activity Database

Sun, Y.; Kamarád, Jiří; Arnold, Zdeněk; Kou, Z.; Cheng, Z.

2006-01-01

Roč. 88, č. 10 (2006), 102505/1-102505/3 ISSN 0003-6951 R&D Projects: GA ČR(CZ) GA106/06/0368 Institutional research plan: CEZ:AV0Z10100521 Keywords : magnetocaloric effect * pressure effect * manganites * single crystal Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.977, year: 2006

Enhanced magnetocaloric properties and critical behavior of (Fe0.72Cr0.28)3Al alloys for near room temperature cooling

International Nuclear Information System (INIS)

Sharma, V; Maheshwar Repaka, D V; Chaudhary, V; Ramanujan, R V

2017-01-01

Magnetic cooling is an environmentally friendly, energy efficient, thermal management technology relying on high performance magnetocaloric materials (MCM). Current research has focused on low cost, corrosion resistant, rare earth (RE) free MCMs. We report the structural and magnetocaloric properties of novel, low cost, RE free, iron based (Fe 0.72 Cr 0.28 ) 3 Al alloys. The arc melted buttons and melt spun ribbons possessed the L2 1 crystal structure and B2 crystal structure, respectively. A notable enhancement of 33% in isothermal entropy change (−Δ S m ) and 25% increase in relative cooling power (RCP) for the ribbons compared to the buttons can be attributed to higher structural disorder in the Fe–Cr and Fe–Al sub-lattices of the B2 structure. The critical behavior was investigated using modified Arrott plots, the Kouvel–Fisher plot and the critical isotherm technique; the critical exponents were found to correspond to the short-range order 3D Heisenberg model. The field and temperature dependent magnetization curves of (Fe 0.72 Cr 0.28 ) 3 Al alloys revealed their soft magnetic nature with negligible hysteresis. Thus, these alloys possess promising performance attributes for near room temperature magnetic cooling applications. (paper)

Magnetic and magnetocaloric properties of itinerant-electron system Hf.sub.1-x./sub.Ta.sub.x./sub.Fe.sub.2./sub. (x = 0.125 and 0.175)

Czech Academy of Sciences Publication Activity Database

Diop, L.V.B.; Kaštil, Jiří; Isnard, O.; Arnold, Zdeněk; Kamarád, Jiří

2015-01-01

Roč. 627, Apr (2015), s. 446-450 ISSN 0925-8388 R&D Projects: GA ČR GAP204/12/0692 Institutional support: RVO:68378271 Keywords : itinerant-electron compounds * magnetic properties * magnetocaloric effect Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.014, year: 2015

Magnetocaloric effect in La(FexSi1-x)13 doped with hydrogen and under external pressure

International Nuclear Information System (INIS)

Medeiros, L.G. de; Oliveira, N.A. de

2006-01-01

In this paper, we calculate the magnetocaloric effect in the compounds La(Fe x Si 1-x ) 13 doped with hydrogen and subjected to external pressure. We use a microscopical model where the Coulomb interaction between itinerant electrons is treated in the mean field approach. The effect of hydrogen atoms is considered as a chemical pressure. We also include phenomenologically the magnetoelastic coupling via the renormalization of the electron dispersion relation and the Debye temperature. The calculated isothermal entropy changes upon magnetic field variations for the compound La(Fe 0.88 Si 0.12 ) 13 H y are in good agreement with the available experimental data

Reverse tissue expansion by liposuction deflation adopted for harvest of large sheet of full-thickness skin graft.

Science.gov (United States)

Ibrahim, A E; Debbas, C C; Dibo, S A; Atiyeh, B S; Abu-Sittah, G S; Isik, S

2012-06-30

Full-thickness skingraft is a valid option to release burn scar contractures with the main purpose of correcting the induced limitation in function and improve the disfiguring appearance of the scar. The main pitfall remains the limited availability of these grafts, especially when large sheets are needed. We present an application of a previously described technique known as reverse tissue expansion, which permits the harvesting of a large sheet of full thickness skin graft when needed. This method was adopted to release a burn scar contracture in a 32-yr-old man who sustained a 65% TBSA burn secondary to a gasoline tank explosion at the age of 7 yr followed by multiple reconstructive procedures. The patient presented with a disfiguring anterior neck contracture coupled to limited range of motion. Improvement of neck extension was contemplated using full-thickness skin graft harvested following reverse tissue expansion achieved by deflation liposuction of the donor site.

Large reversible magnetostrictive effect of MnCoSi-based compounds prepared by high-magnetic-field solidification

Science.gov (United States)

Hu, Q. B.; Hu, Y.; Zhang, S.; Tang, W.; He, X. J.; Li, Z.; Cao, Q. Q.; Wang, D. H.; Du, Y. W.

2018-01-01

The MnCoSi compound is a potential magnetostriction material since the magnetic field can drive a metamagnetic transition from an antiferromagnetic phase to a high magnetization phase in it, which accompanies a large lattice distortion. However, a large driving magnetic field, magnetic hysteresis, and poor mechanical properties seriously hinder its application for magnetostriction. By substituting Fe for Mn and introducing vacancies of the Mn element, textured and dense Mn0.97Fe0.03CoSi and Mn0.88CoSi compounds are prepared through a high-magnetic-field solidification approach. As a result, large room-temperature and reversible magnetostriction effects are observed in these compounds at a low magnetic field. The origin of this large magnetostriction effect and potential applications are discussed.

Crystal structure, magnetic and magnetocaloric properties of aluminum-doped La{sub 0.6}Sr{sub 0.4}MnO{sub 3} perovskites

Energy Technology Data Exchange (ETDEWEB)

Elhamza, Amal; Dhahri, J. [Universite de Monastir, Laboratoire de la Matiere Condensee et des Nanosciences, Monastir (Tunisia); Rhouma, F.I.H. [Centre de Recherche des Sciences et Technologies de l' Energie, Laboratoire de Photovoltaique de Semi-Conducteurs et de Nanostructures, Hammam-Lif (Tunisia); Hlil, E.K. [CNRS-Universite Joseph Fourier, Institut Neel, Grenoble (France)

2017-05-15

In this paper, we report on the structural, magnetic and magnetocaloric properties of a series of nanocrystallines La{sub 0.6}Sr{sub 0.4}Mn{sub 1-x}Al{sub x}O{sub 3} (0 ≤ x ≤ 0.2) which were prepared by the sol-gel method. The X-ray powder diffraction showed that all our synthesized samples were of a single phase and have crystallized in the hexagonal symmetry with R anti 3c space group. Magnetic measurements showed that the sample exhibits a ferromagnetic-to-paramagnetic phase transition at a Curie temperature close to 206 K. The maximum value of the magnetic entropy change vertical stroke ΔS{sub M}{sup max} vertical stroke was found to be 1.09 J kg{sup -1} K{sup -1} for an applied magnetic field of 5T. At this value of magnetic field, the relative cooling power was 141 J kg{sup -1}. Our result on magnetocaloric properties suggests that La{sub 0.6}Sr{sub 0.4}Mn{sub 1-x}Al{sub x}O{sub 3} nanopowder with (0 ≤ x ≤ 0.2) is attractive as a potential refrigerant for high-temperature magnetic refrigeration. (orig.)

Magnetism of a sigma-phase Fe{sub 60}V{sub 40} alloy: Magnetic susceptibilities and magnetocaloric effect studies

Energy Technology Data Exchange (ETDEWEB)

Bałanda, Maria [Institute of Nuclear Physics, Polish Academy of Science, PL-31-342 Kraków (Poland); Dubiel, Stanisław M., E-mail: Stanislaw.Dubiel@fis.agh.edu.pl [AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, PL-30-059 Kraków (Poland); Pełka, Robert [Institute of Nuclear Physics, Polish Academy of Science, PL-31-342 Kraków (Poland)

2017-06-15

Highlights: • Sigma-phase Fe{sub 60}V{sub 40} alloy was studied by means of AC and DC magnetic susceptibilities. • Re-entrant character of the magnetism has been evidenced. • Curie temperature was found as ∼169 K and the spin-freezing temperature as ∼164 K. • Critical exponents β = 0.6, γ = 1.0 and Δ = 1.6 were determined. • Magnetocaloric effect was investigated. - Abstract: Magnetic properties of a sigma-phase Fe{sub 60}V{sub 40} intermetallic compound were studied by means of ac and dc magnetic susceptibility and magnetocaloric effect measurements. The compound is a soft magnet yet it was found to behave like a re-entrant spin-glass system. The magnetic ordering temperature was found to be T{sub C} ≈ 170 K, while the spin-freezing temperature was ∼164 K. Its relative shift per decade of ac frequency was 0.002, a value smaller than that typical of canonical spin-glasses. Magnetic entropy change, ΔS, in the vicinity of T{sub C} was determined for magnetic field, H, ranging between 5 and 50 kOe. Analysis of ΔS in terms of the power law yielded the critical exponent, n, vs. temperature with the minimum value of 0.75 at T{sub C}, while from the analysis of a relative shift of the maximum value of ΔS with the field a critical exponent Δ = 1.7 was obtained. Based on scaling laws relationships values of other two exponents viz. β = 0.6 and γ = 1 were determined.

Estimation of magnetocaloric properties by using Monte Carlo method for AMRR cycle

International Nuclear Information System (INIS)

Arai, R; Fukuda, H; Numazawa, T; Tamura, R; Li, J; Saito, A T; Nakagome, H; Kaji, S

2015-01-01

In order to achieve a wide refrigerating temperature range in magnetic refrigeration, it is effective to layer multiple materials with different Curie temperatures. It is crucial to have a detailed understanding of physical properties of materials to optimize the material selection and the layered structure. In the present study, we discuss methods for estimating a change in physical properties, particularly the Curie temperature when some of the Gd atoms are substituted for non-magnetic elements for material design, based on Gd as a ferromagnetic material which is a typical magnetocaloric material. For this purpose, whilst making calculations using the S=7/2 Ising model and the Monte Carlo method, we made a specific heat measurement and a magnetization measurement of Gd-R alloy (R = Y, Zr) to compare experimental values and calculated ones. The results showed that the magnetic entropy change, specific heat, and Curie temperature can be estimated with good accuracy using the Monte Carlo method. (paper)

New type of magnetocaloric effect: Implications on low-temperature magnetic refrigeration using an Ericsson cycle

International Nuclear Information System (INIS)

Takeya, H.; Pecharsky, V.K.; Gschneidner, K.A. Jr.; Moorman, J.O.

1994-01-01

The low-temperature, high magnetic field heat capacity (1.5 to 70 K and 0 to 9.85 T), dc and ac magnetic behaviors of the compound (Gd 0.54 Er 0.46 )AlNi show that field-induced magnetic entropy change is significant and almost constant over the temperature region of ∼15 to ∼45 K. The resulting temperature dependence of the magnetocaloric effect, nearly constant over a 30+ K temperature range, is unprecedented (most magnetic materials have a caretlike shape temperature dependence). These data show that (Gd 0.54 Er 0.46 )AlNi can be used as an effective active magnetic regenerator material for an Ericsson-cycle magnetic refrigerator, and could substitute for complex composite layered materials suggested earlier

Magnetocaloric effect in In doped YbMnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Sattibabu, Bhumireddi, E-mail: bsb.satti@gmail.com [School of Engineering Sciences and Technology, University of Hyderabad, Hyderabad 500046 (India); Department of Electronics and Physics, Institute of Science, GITAM University, Visakhapatnam 530045 (India); Bhatnagar, A.K., E-mail: anilb42@gmail.com [School of Physics, University of Hyderabad, Hyderabad 500046 (India); Vinod, K.; Mani, Awadhesh [Condensed Matter Physics Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India)

2017-06-01

Magnetic and magnetocaloric (MCE) properties of Yb{sub 0.9}In{sub 0.1}MnO{sub 3} and Yb{sub 0.8}In{sub 0.2}MnO{sub 3} polycrystalline samples are presented in this paper. Isothermal magnetization measurements reveal a field induced magnetic transition. Magnetic entropy change of 2.34±0.35 J/mole-K for Yb{sub 0.9}In{sub 0.1}MnO{sub 3} and 2.64±0.38 J/mole-K for Yb{sub 0.8}In{sub 0.2}MnO{sub 3} field change ΔH =10 KOe is observed around the ferromagnetic ordering temperature of Yb{sup 3+}. Values of relative cooling power for the same field change are found to be 38.03±9 J /mol, and 40.90±10 J/mol for Yb{sub 0.9}In{sub 0.1}MnO{sub 3} and Yb{sub 0.8}In{sub 0.2}MnO{sub 3}, respectively. These values suggest In doped YbMnO{sub 3} may be a potential candidate for magnetic refrigerant at low temperatures.

Thermodynamic behavior and enhanced magnetocaloric effect in a frustrated spin-1/2 Ising-Heisenberg triangular tube

Science.gov (United States)

Alécio, Raphael Cavalcante; Strečka, Jozef; Lyra, Marcelo L.

2018-04-01

The thermodynamic behavior of an Ising-Heisenberg triangular tube with Heisenberg intra-rung and Ising inter-rung interactions is exactly obtained in an external magnetic field within the framework of the transfer-matrix method. We report rigorous results for the temperature dependence of the magnetization, entropy, pair correlations and specific heat, as well as typical iso-entropic curves. The discontinuous field-driven ground-state phase transitions are reflected in some anomalous thermodynamic behavior as for instance a striking low-temperature peak of the specific heat and an enhanced magnetocaloric effect. It is demonstrated that the intermediate magnetization plateaus shrink in and the relevant sharp edges associated with the magnetization jump round off upon increasing temperature.

Quantum reverse hypercontractivity

Energy Technology Data Exchange (ETDEWEB)

Cubitt, Toby [Department of Computer Science, University College London, London, United Kingdom and Centre for Quantum Information and Foundations, DAMTP, University of Cambridge, Cambridge (United Kingdom); Kastoryano, Michael [NBIA, Niels Bohr Institute, University of Copenhagen, 2100 Copenhagen (Denmark); Montanaro, Ashley [School of Mathematics, University of Bristol, Bristol (United Kingdom); Temme, Kristan [Institute for Quantum Information and Matter, California Institute of Technology, Pasadena, California 91125 (United States)

2015-10-15

We develop reverse versions of hypercontractive inequalities for quantum channels. By generalizing classical techniques, we prove a reverse hypercontractive inequality for tensor products of qubit depolarizing channels. We apply this to obtain a rapid mixing result for depolarizing noise applied to large subspaces and to prove bounds on a quantum generalization of non-interactive correlation distillation.

The Geomagnetic Field During a Reversal

Science.gov (United States)

Heirtzler, James R.

2003-01-01

By modifying the IGRF it is possible to learn what may happen to the geomagnetic field during a geomagnetic reversal. If the entire IGRF reverses then the declination and inclination only reverse when the field strength is zero. If only the dipole component of the IGRF reverses a large geomagnetic field remains when the dipole component is zero and he direction of the field at the end of the reversal is not exactly reversed from the directions at the beginning of the reversal.

Tuning the magnetocaloric response of Er-based metallic glasses by varying structural order in disorder

Energy Technology Data Exchange (ETDEWEB)

Luo, Qiang [School of Materials Science and Engineering, Tongji University, Shanghai 201804 (China); Tang, Meibo [Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Shen, Jun, E-mail: junshen@tongji.edu.cn [School of Materials Science and Engineering, Tongji University, Shanghai 201804 (China)

2016-03-01

The effects of structural order on magnetocaloric response have been explored in Er{sub 60}Al{sub 16}Co{sub 20}Ni{sub 4} metallic glass (MG). Compared with the fully amorphous structure of the as-spun ribbon (cooling rate ∼10{sup 6} K/s), the rod sample fabricated with a lower cooling rate (∼10{sup 3} K/s) contains a few crystalline phases embedded in the amorphous matrix. Annealing the ribbon in the supercooled liquid region results in formation of a large amount of nanocrystalline phase. Both the as-spun ribbon and rod samples show a single spin-glass-like transition behavior, while the annealed sample exhibits double-freezing processes. It is found that the sparsely distributed micro-sized crystalline phases (content fraction of 13%) exert a slight effect on the magnetic entropy change (MEC). However, densely distributed nanocrystallization phase (∼50%) in amorphous matrix leads to an obvious reduction of the MEC and refrigerant capacity (RC). The exponent n of field dependence of MEC is found to related to exchange frustration, random anisotropy, and structure ordering degrees. - Highlights: • We determined the significant role of the size and distribution of the crystalline phases on the magnetic structure and magnetic performance of metallic glass composite. • It is found that the sparsely distributed micro-sized crystalline phases (content fraction of 13%) exert a slight effect on the MEC. • Densely distributed nanocrystalline phase (~50%) leads to an obvious reduction of the MEC.

Enhancement of magnetocaloric effect by external hydrostatic pressure in MnNi0.75Fe0.25Ge alloy

Science.gov (United States)

Mandal, K.; Dutta, P.; Dasgupta, P.; Pramanick, S.; Chatterjee, S.

2018-06-01

A systematic investigation on the structural and magnetic properties of an Fe-doped MnNiGe alloy with nominal composition MnNi0.75Fe0.25Ge has been performed. Temperature dependent x-ray diffraction studies indicate a clear structural phase transition (martensitic type) from the high temperature hexagonal austenite phase (space group P63/mmc) to the low temperature orthorhombic martensite phase (space group Pnma). Interestingly, about 1.4% of the high temperature hexagonal phase has been observed at 15 K, which is well below the martensitic phase transition (MPT) temperature. The studied alloy is found to be ferromagnetic in nature at the lowest temperature of measurement and the saturation moment increases in the presence of external hydrostatic pressure (P). In addition, it shows a significantly large conventional (negative) magnetocaloric effect with an adiabatic entropy change () of about ‑16.2 J kg‑1 K‑1 around the MPT for a magnetic field changing from 0  →  5 T. The most interesting observation is the  ∼40.1% increase in the peak value of on application of 6 kbar of external P. A considerable increment in the refrigeration capacity has also been noted with the applied P.

Thermopower and magnetocaloric properties in NdSrMnO/CrO3 composites

Science.gov (United States)

Ahmed, A. M.; Mohamed, H. F.; Paixão, J. A.; Mohamed, Sara A.

2018-06-01

The thermoelectric power (TEP) and magnetocaloric effect (MCE) for (Nd0.6Sr0.4MnO3)1-x/(CrO3)x composites have been measured. The TEP measurements show a negative sign value of the Seebeck coefficient (S), in microvolts. TEP data construe in the low range of temperature by the magnon and phonon drag model, whereas at high temperature by small polaron conduction mechanism. Magnetic measurements exhibit that all composites show a paramagnetic-ferromagnetic transition with decreasing temperature. The Arrott plots of composites reveal the occurrence of a second order phase transition. The maximum value of magnetic entropy change (ΔS) is 2.37 J kg-1 K-1, achieved fore the composite with x = 0.015. Moreover, the maximum value of relative cooling power (RCP) is 122.1 J kg-1, achieved for the composite with x = 0.020. These composites may be appropriate for magnetic application near room temperature.

Pulsed high-magnetic-field experiments: New insights into the magnetocaloric effect in Ni-Mn-In Heusler alloys

International Nuclear Information System (INIS)

Salazar Mejía, C.; Nayak, A. K.; Felser, C.; Nicklas, M.; Ghorbani Zavareh, M.; Wosnitza, J.; Skourski, Y.

2015-01-01

The present pulsed high-magnetic-field study on Ni 50 Mn 35 In 15 gives an extra insight into the thermodynamics of the martensitic transformation in Heusler shape-memory alloys. The transformation-entropy change, ΔS, was estimated from field-dependent magnetization experiments in pulsed high magnetic fields and by heat-capacity measurements in static fields. We found a decrease of ΔS with decreasing temperature. This behavior can be understood by considering the different signs of the lattice and magnetic contributions to the total entropy. Our results further imply that the magnetocaloric effect will decrease with decreasing temperature and, furthermore, the martensitic transition is not induced anymore by changing the temperature in high magnetic fields

Comparison of the order of magnetic phase transitions in several magnetocaloric materials using the rescaled universal curve, Banerjee and mean field theory criteria

Energy Technology Data Exchange (ETDEWEB)

Burrola-Gándara, L. A., E-mail: andres.burrola@gmail.com; Santillan-Rodriguez, C. R.; Rivera-Gomez, F. J.; Saenz-Hernandez, R. J.; Botello-Zubiate, M. E.; Matutes-Aquino, J. A. [Departamento de Física de Materiales, Centro de Investigación en Materiales Avanzados, S.C., Miguel de Cervantes 120, Complejo Industrial Chihuahua, Chihuahua 31109 (Mexico)

2015-05-07

Magnetocaloric materials with second order phase transition near the Curie temperature can be described by critical phenomena theory. In this theory, scaling, universality, and renormalization are key concepts from which several phase transition order criteria are derived. In this work, the rescaled universal curve, Banerjee and mean field theory criteria were used to make a comparison for several magnetocaloric materials including pure Gd, SmCo{sub 1.8}Fe{sub 0.2}, MnFeP{sub 0.46}As{sub 0.54}, and La{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3}. Pure Gd, SmCo{sub 1.8}Fe{sub 0.2}, and La{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3} present a collapse of the rescaled magnetic entropy change curves into a universal curve, which indicates a second order phase transition; applying Banerjee criterion to H/σ vs σ{sup 2} Arrot plots and the mean field theory relation |ΔS{sub M}| ∝ (μ{sub 0}H/T{sub c}){sup 2/3} for the same materials also determines a second order phase transition. However, in the MnFeP{sub 0.46}As{sub 0.54} sample, the Banerjee criterion applied to the H/σ vs σ{sup 2} Arrot plot indicates a first order magnetic phase transition, while the mean field theory prediction for a second order phase transition, |ΔS{sub M}| ∝ (μ{sub 0}H/T{sub c}){sup 2/3}, describes a second order behavior. Also, a mixture of first and second order behavior was indicated by the rescaled universal curve criterion. The diverse results obtained for each criterion in MnFeP{sub 0.46}As{sub 0.54} are apparently related to the magnetoelastic effect and to the simultaneous presence of weak and strong magnetism in Fe (3f) and Mn (3g) alternate atomic layers, respectively. The simultaneous application of the universal curve, the Banerjee and the mean field theory criteria has allowed a better understanding about the nature of the order of the phase transitions in different magnetocaloric materials.

Magnetic, transport, and magnetocaloric properties of boron doped Ni-Mn-In alloys

International Nuclear Information System (INIS)

Pandey, S.; Quetz, A.; Aryal, A.; Dubenko, I.; Ali, N.; Rodionov, I. D.; Blinov, M. I.; Titov, I. S.; Prudnikov, V. N.; Granovsky, A. B.; Stadler, S.

2015-01-01

The impact of B substitution in Ni 50 Mn 35 In 15−x B x Heusler alloys on the structural, magnetic, transport, and parameters of the magnetocaloric effect (MCE) has been studied by means of room-temperature X-ray diffraction and thermomagnetic measurements (in magnetic fields (H) up to 5 T, and in the temperature interval 5–400 K). Direct adiabatic temperature change (ΔT AD ) measurements have been carried out for an applied magnetic field change of 1.8 T. The transition temperatures (T-x) phase diagram has been constructed for H = 0.005 T. The MCE parameters were found to be comparable to those observed in other MCE materials such as Ni 50 Mn 34.8 In 14.2 B and Ni 50 Mn 35 In 14 X (X=In, Al, and Ge) Heusler alloys. The maximum absolute value of ΔT AD  = 2.5 K was observed at the magnetostructural transition for Ni 50 Mn 35 In 14.5 B 0.5

Magnetocaloric effect (MCE): Microscopic approach within Tyablikov approximation for anisotropic ferromagnets

Energy Technology Data Exchange (ETDEWEB)

Kotelnikova, O.A.; Prudnikov, V.N. [Physical Faculty, Lomonosov State University, Department of Magnetism, Moscow (Russian Federation); Rudoy, Yu.G., E-mail: rudikar@mail.ru [People' s Friendship University of Russia, Department of Theoretical Physics, Moscow (Russian Federation)

2015-06-01

The aim of this paper is to generalize the microscopic approach to the description of the magnetocaloric effect (MCE) started by Kokorina and Medvedev (E.E. Kokorina, M.V. Medvedev, Physica B 416 (2013) 29.) by applying it to the anisotropic ferromagnet of the “easy axis” type in two settings—with external magnetic field parallel and perpendicular to the axis of easy magnetization. In the last case there appears the field induced (or spin-reorientation) phase transition which occurs at the critical value of the external magnetic field. This value is proportional to the exchange anisotropy constant at low temperatures, but with the rise of temperature it may be renormalized (as a rule, proportional to the magnetization). We use the explicit form of the Hamiltonian of the anisotropic ferromagnet and apply widely used random phase approximation (RPA) (known also as Tyablikov approximation in the Green function method) which is more accurate than the well known molecular field approximation (MFA). It is shown that in the first case the magnitude of MCE is raised whereas in the second one the MCE disappears due to compensation of the critical field renormalized with the magnetization.

The influence of Co substitution on the magnetocaloric effect of Gd(Al,Fe)2

International Nuclear Information System (INIS)

Deng, J Q; Yan, J L; Huang, J L; Zhu, J M; Chen, X; Zhuang, Y H

2007-01-01

The magnetocaloric effect (MCE) in samples GdAl 1.7 (Fe 1-x Co x ) 0.3 with x= 0, 0.1, 0.2, 0.3 and 0.4 were investigated by x-ray diffraction (XRD) and magnetization measurements. It was found that five samples crystallize well in the MgCu 2 -type structure. The lattice parameter and the values of Curie temperature decrease with increasing Co content, whereas the magnetic-entropy change and cooling capacity increase. In the magnetic-field change of 2.0 T the maximum of the magnetic-entropy change and refrigerant capacity in sample GdAl 1.7 Fe 0.7 Co 0.3 reach 4.8 J kg -1 K -1 and 88.3 J kg -1 , respectively. The maximum of the magnetic-entropy change is comparable to that of Gd metal (3.8 J kg -1 K -1 in Δ B=1.5 T)

Martensitic transition near room temperature and the temperature- and magnetic-field-induced multifunctional properties of Ni49CuMn34In16 alloy

Science.gov (United States)

Sharma, V. K.; Chattopadhyay, M. K.; Khandelwal, A.; Roy, S. B.

2010-11-01

A near room-temperature martensitic transition is observed in the ferromagnetic austenite state of Ni50Mn34In16 alloy with 2% Cu substitution at the Ni site. Application of magnetic field in the martensite state induces a reverse martensitic transition in this alloy. dc magnetization, magnetoresistance and strain measurements in this alloy reveal that associated with this martensitic transition there exist a large magnetocaloric effect, a large magnetoresitance and a magnetic-field temperature-induced strain. This NiMnIn alloy system thus is an example of an emerging class of magnetic materials whose physical properties can be tuned by suitable chemical substitutions, to achieve magnetic-field and temperature-induced multifunctional properties at and around room temperature

Calorimetric and magnetic study for Ni{sub 50}Mn{sub 36}In{sub 14} and relative cooling power in paramagnetic inverse magnetocaloric systems

Energy Technology Data Exchange (ETDEWEB)

Chen, Jing-Han, E-mail: jhchen@tamu.edu [Department of Physics and Astronomy, Texas A and M University, College Station, Texas 77843 (United States); Bruno, Nickolaus M. [Department of Mechanical Engineering, Texas A and M University, College Station, Texas 77843 (United States); Karaman, Ibrahim [Department of Mechanical Engineering, Texas A and M University, College Station, Texas 77843 (United States); Department of Materials Science and Engineering, Texas A and M University, College Station, Texas 77843 (United States); Huang, Yujin; Li, Jianguo [School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai 200240 (China); Ross, Joseph H. [Department of Physics and Astronomy, Texas A and M University, College Station, Texas 77843 (United States); Department of Materials Science and Engineering, Texas A and M University, College Station, Texas 77843 (United States)

2014-11-28

The non-stoichiometric Heusler alloy Ni{sub 50}Mn{sub 36}In{sub 14} undergoes a martensitic phase transformation in the vicinity of 345 K, with the high temperature austenite phase exhibiting paramagnetic rather than ferromagnetic behavior, as shown in similar alloys with lower-temperature transformations. Suitably prepared samples are shown to exhibit a sharp transformation, a relatively small thermal hysteresis, and a large field-induced entropy change. We analyzed the magnetocaloric behavior both through magnetization and direct field-dependent calorimetry measurements. For measurements passing through the first-order transformation, an improved method for heat-pulse relaxation calorimetry was designed. The results provide a firm basis for the analytic evaluation of field-induced entropy changes in related materials. An analysis of the relative cooling power (RCP), based on the integrated field-induced entropy change and magnetizing behavior of the Mn spin system with ferromagnetic correlations, shows that a significant RCP may be obtained in these materials by tuning the magnetic and structural transformation temperatures through minor compositional changes or local order changes.

Effect of B-doping on the structural, magnetotransport and magnetocaloric properties of La0.67Ca0.33MnO3 compounds

International Nuclear Information System (INIS)

Kolat, V.S.; Gencer, H.; Gunes, M.; Atalay, S.

2007-01-01

In this study, the effect of Mn site substitution of B on the structural, electrical and magnetocaloric properties of manganites was investigated. Polycrystalline manganites with the chemical composition La 0.67 Ca 0.33 Mn 1-x B x O 3 (x = 0, 0.1, 0.2 and 0.3) were prepared by the standard solid-state process. It was found that the magnetisation, the Curie temperature and the maximum value of the magnetic entropy change |ΔS m | decrease with increasing concentration of B

Design of a new large s field reversed configuration experiment

International Nuclear Information System (INIS)

Hoffman, A.L.; Slough, J.T.

1986-01-01

The present TRX facility utilizes programmed formation techniques to form s = 2 plasmas in a 20 cm diameter by 1 m long plasma tube. LSX will have an 80 cm diameter by 4 m long plasma tube and will employ the same programmed formation techniques as TRX. This should result in s = 8 plasmas and FRC flux and energy lifetimes in the msec range if the presently measured scaling persists. LSX will be initially restricted to an external field of 7.5 kG, and typical plasma conditions will be 300 eV electron and ion temperatures and electron or ion densities of about 2x10/sup 15/ cm/sup -3/. The low voltage formation techniques developed in TRX-2 (Eθ /sub values of about 100 volts/cm) will also be employed on LSX, so that relatively low voltage power supplies can be utilized. A modified form of second half cycle circuitry is planned to replace the function of a large reverse bias capacitor bank. The increase in total power supply efficiency allows the primary magnet energy storage to be less that 1 MJ

On flow reversals in Rayleigh-Bénard convection

International Nuclear Information System (INIS)

Chandra, Mani; Verma, Mahendra K

2011-01-01

The dynamics of flow reversals are studied numerically using Fourier mode analysis. Our analysis shows that the Fourier modes represent the large-scale flows accurately. We observe that during the reversals, the amplitude of one of the large-scale modes vanishes, while another mode rises sharply, very similar to the cessation-led reversals observed earlier in experiments and numerical simulations. The Fourier coefficients of the RBC equations obey certain symmetries properties, which dictates which modes change sign in flow reversals. Based on our simulation results and symmetry properties of the Fourier modes, we provide a qualitative explanation for the flow reversals.

Table-like magnetocaloric effect in Gd56Ni15Al27Zr2 alloy and its field independence feature

International Nuclear Information System (INIS)

Agurgo Balfour, E.; Ma, Z.; Fu, H.; Wang, L.; Luo, Y.; Hadimani, R. L.; Jiles, D. C.; Wang, S. F.

2015-01-01

In order to obtain “table-like” magnetocaloric effect (MCE), multiple-phase Gd 56 Ni 15 Al 27 Zr 2 alloy was prepared by arc-melting followed by suck-casting method. Powder x-ray diffraction and calorimetric measurements reveal that the sample contains both glassy and crystalline phases. The fraction of the glassy phase is about 62%, estimated from the heat enthalpy of the crystallization. The crystalline phases, Gd 2 Al and GdNiAl further broadened the relatively wider magnetic entropy change (−ΔS M ) peak of the amorphous phase, which resulted in the table-like MCE over a maximum temperature range of 52.5 K to 77.5 K. The plateau feature of the MCE was found to be nearly independent of the applied magnetic field from 3 T to 5 T. The maximum −ΔS M value of the MCE platforms is 6.0 J/kg K under applied magnetic field change of 5 T. Below 3 T, the field independence of the table-like feature disappears. The relatively large constant values of −ΔS M for the respective applied magnetic fields have promising applications in magnetic refrigeration using regenerative Ericsson cycle

Magnetic and magnetocaloric properties in second-order phase transition La1-xKxMnO3 and their composites

Science.gov (United States)

Thanh, Tran Dang; Linh, Dinh Chi; Yen, Pham Duc Huyen; Bau, Le Viet; Ky, Vu Hong; Wang, Zhihao; Piao, Hong-Guang; An, Nguyen Manh; Yu, Seong-Cho

2018-03-01

In this work, we present a detailed study on the magnetic properties and the magnetocaloric effect (MCE) of La1-xKxMnO3 compounds with x=0.05-0.2. Our results pointed out that the Curie temperature (TC) could be controlled easily from 213 to 306 K by increasing K-doping concentration (x) from 0.05 to 0.2. In the paramagnetic region, the inverse of the susceptibility can be analyzed by using the Curie-Weiss law, χ(T)=C/(T-θ). The results have proved an existence of ferromagnetic clusters at temperatures above TC. Based on Banerjee's criteria, we also pointed out that the samples are the second-order phase transition materials. Their magnetic entropy change was calculated by using the Maxwell relation and a phenomenological model. Interestingly, the samples with x=0.1-0.2 exhibit a large MCE in a range of 282-306 K, which are suitable for room-temperature magnetic refrigeration applications. The composites obtained from single phase samples (x=0.1-0.2) exhibit the high relative cooling power values in a wide temperature range. From the viewpoint of the refrigerant capacity, the composites formed out of La1-xKxMnO3 will become more useful for magnetic refrigeration applications around room-temperature.

Strain dependent magnetocaloric effect in La0.67Sr0.33MnO3 thin-films

Directory of Open Access Journals (Sweden)

V. Suresh Kumar

2013-05-01

Full Text Available The strain dependent magnetocaloric properties of La0.67Sr0.33MnO3 thin films deposited on three different substrates (001 LaAlO3 (LAO, (001 SrTiO3 (STO, and (001 La0.3Sr0.7Al0.65Ta0.35O9 (LSAT have been investigated under low magnetic fields and around magnetic phase transition temperatures. Compared to bulk samples, we observe a remarkable decrease in the ferromagnetic transition temperature that is close to room temperature, closely matched isothermal magnetic entropy change and relative cooling power values in tensile strained La0.67Sr0.33MnO3 films. The epitaxial strain plays a significant role in tuning the peak position of isothermal magnetic entropy change towards room temperature with improved cooling capacity.

Martensitic phase transformations and magnetocaloric effect in Al co-sputtered Ni–Mn–Sb alloy thin films

International Nuclear Information System (INIS)

Akkera, Harish Sharma; Choudhary, Nitin; Kaur, Davinder

2015-01-01

Highlights: • The Al content leads to a increase in the martensitic transformation temperature. • A maximum ΔS M = 23 mJ/cm 3 K at 300 K was observed in the N 49.8 Mn 32.97 Al 4.43 Sb 12.8 . • The refrigeration capacity RC = 64.4 mJ/cm 3 at 2 T for N 49.8 Mn 32.97 Al 4.43 Sb 12.8 film. - Abstract: We systematically investigated the influence of aluminium (Al) content on the martensitic transformations and magnetocaloric effect (MCE) in Ni–Mn–Sb ferromagnetic shape memory alloy (FSMA) thin films. The temperature-dependent magnetization (M–T) and resistance (R–T) results displayed a monotonic increase in martensitic transformation temperature (T M ) with increasing Al content. From the isothermal magnetization (M–H) curves, a large magnetic entropy change (ΔS M ) of 23 mJ/cm 3 K was observed in N 49.8 Mn 32.97 Al 4.43 Sb 12.8 . A remarkable enhancement of MCE could be attributed to the significant change in the magnetization of Ni–Mn–Sb films with increasing Al content. Furthermore, a high refrigerant capacity (RC) was observed in Ni–Mn–Sb–Al thin films as compared to pure Ni–Mn–Sb. The substitution of Al for Mn in Ni–Mn–Sb thin films with field induced MCE are potential candidates for micro length scale magnetic refrigeration applications where low magnetic fields are desirable

Direct measurements of conventional and anisotropic magnetocaloric effect in binary RAl2 single crystals

Science.gov (United States)

Monteiro, J. C. B.; Gandra, F. G.

2017-06-01

We report on specific heat and magnetocaloric effect (MCE) measurements in single crystals of HoAl2, DyAl2, and TbAl2 measured by a heat flux technique using Peltier devices. Those compounds order ferromagnetically at 31 K, 61 K, and 106 K respectively, and present a spin reorientation transition (SRT) below TC. We study the dependence of the SRT with magnetic field and temperature by means of specific heat measurements performed in single crystals oriented at the [" separators="| 100 ], [" separators="| 110 ], and [" separators="| 111 ] directions with the aid of calculations using a simple model. We obtained the conventional MCE for HoAl2 and TbAl2 and also the anisotropic version of the effect obtained indirectly from the specific heat for TbAl2 and DyAl2. We also present the results for a direct determination of the anisotropic MCE for DyAl2 by measuring the heat flux generated by a rotation of the single crystal under constant field.

Hydrostatic pressure-tuned magnetostructural transition and magnetocaloric effect in Mn-Co-Ge-In compounds

Science.gov (United States)

Liang, F. X.; Shen, F. R.; Liu, Y.; Li, J.; Qiao, K. M.; Wang, J.; Hu, F. X.; Sun, J. R.; Shen, B. G.

2018-05-01

Polycrystalline MnCoGe0.99In0.01 with magnetostructural transition temperature (Tmstr) around 330 K has been prepared by arc-melting technique, and the pressure-tuned magnetostructural transition as well as the magnetocaloric effect (MCE) has been investigated. The experimental results indicate that a pressure (P) smaller than 0.53 GPa can shift Tmstr to lower temperature at a considerable rate of 119 K/GPa with the coupled nature of magnetostructural transition unchanged. However, as P reaches 0.53 GPa, the martensitic structural transition temperature (TM) further shifts to 254 K while the magnetic transition temperature of austenitic phase (TCA) occurs at around 282 K, denoting the decoupling of magnetostructural transition. Further increasing P to 0.87 GPa leads the further shift of TM to a lower temperature while the TCA keeps nearly unchanged. Therefore, the entropy change (ΔS) of the MnCoGe0.99In0.01 under different magnetic fields can be tailored by adjusting the hydrostatic pressure.

Metamagnetism, sign reversal and low temperature magnetocaloric effect in single-crystalline EuV2Al20

Science.gov (United States)

Ramesh Kumar, K.; Nair, Harikrishnan S.; Bhattacharyya, A.; Thamizhavel, A.; Strydom, André M.

2018-04-01

The Frank-Kasper cage compound EuV2Al20 crystallizes in the cubic structure with Fd 3 ‾ m space group and exhibits unusual magnetic and transport properties. The system undergoes an antiferromagnetic transition below 5.6 K wherein the Eu2+ moments are aligned anti-parallel along 〈1 1 1〉 direction and the system exhibits a weak metamagetic transition at the field of 1 T. Arrott plots (M2 vs H / M) show a "S" shaped variation in the low fields below TN and the plausible reason for the occurrence of negative slope is discussed. Isothermal magnetic entropy change is estimated from both magnetization and heat capacity measurements invoking the Maxwell's thermodynamic relations. Temperature variation of ΔSm showed a weak negative minimum and a sign reversal at the field value of 1 T due to field induced metamagnetic transition. Universal master curve is constructed by rescaling the ΔSm vs T curves in the context of analysing the nature of the magnetic transition.

Behavior of the magnetocaloric effect in La0.7Ba0.2Ca0.1Mn1-xSnxO3 manganite oxides as promising candidates for magnetic refrigeration

Science.gov (United States)

Dhahri, Ja.; Mnefgui, Safa; Ben Hassine, A.; Tahri, Ta.; Oumezzine, M.; Hlil, E. K.

2018-05-01

The magnetocaloric effect along with magnetic phase transition in the peroveskite polycrystalline samples La0.7Ba0.2Ca0.1Mn1-xSnxO3 (x = 0 and 0.1) was investigated. The samples were synthesized using conventional solid state reaction at 1400 °C temperature. Magnetization vs. temperature measurements, under a magnetic field of μ0H = 0.05 T, showed a paramagnetic-ferromagnetic transition at Curie temperature, TC, which decreases from 310 K for x = 0-290 K for x = 0.1. A large magnetic entropy change | ΔSM | deduced from isothermal magnetization curves, has been observed in our samples with a peak centered on their respective TC. Interesting values of the relative cooling power (RCP), 237 J kg-1 for x = 0 and 248 J kg-1 x = 0.1, make these samples promising candidates for magnetic refrigeration around room temperature.

Effect of Fe substitution on magnetocaloric effect in La{sub 0.7}Sr{sub 0.3}Mn{sub 1-x}Fe{sub x}O{sub 3} (0.05{<=}x{<=}0.20)

Energy Technology Data Exchange (ETDEWEB)

Barik, S K; Krishnamoorthi, C [Department of Physics and NUS Nanoscience and Nanotechnology Initiative, 2 Science Drive 3, National University of Singapore, Singapore 117542, Singapore. (Singapore); Mahendiran, R [Department of Physics and NUS Nanoscience and Nanotechnology Initiative, 2 Science Drive 3, National University of Singapore, Singapore 117542, Singapore. (Singapore)

2011-04-15

We have studied the effect of Fe substitution on magnetic and magnetocaloric properties in La{sub 0.7}Sr{sub 0.3}Mn{sub 1-x}Fe{sub x}O{sub 3} (x=0.05, 0.07, 0.10, 0.15, and 0.20) over a wide temperature range (T=10-400 K). It is shown that substitution by Fe gradually decreases the ferromagnetic Curie temperature (T{sub C}) and saturation magnetization up to x=0.15 but a dramatic change occurs for x=0.2. The x=0.2 sample can be considered as a phase separated compound in which both short-range ordered ferromagnetic and antiferromagnetic phases coexist. The magnetic entropy change (-{Delta}S{sub m}) was estimated from isothermal magnetization curves and it decreases with increase of Fe content from 4.4 J kg{sup -1} K{sup -1} at 343 K (x=0.05) to 1.3 J kg{sup -1} K{sup -1} at 105 K (x=0.2), under {Delta}H=5 T. The La{sub 0.7}Sr{sub 0.3}Mn{sub 0.93}Fe{sub 0.07}O{sub 3} sample shows negligible hysteresis loss, operating temperature range over 60 K around room temperature with refrigerant capacity of 225 J kg{sup -1}, and magnetic entropy of 4 J kg{sup -1} K{sup -1} which will be an interesting compound for application in room temperature refrigeration. - Research highlights: > We report magnetocaloric effect in La{sub 0.7}Sr{sub 0.3}Mn{sub 1-x}Fe{sub x}O{sub 3} (x=0-0.2). > Magnetic entropy change ({Delta}S{sub m}) decreases with increasing x. > A large {Delta}S{sub m} and refrigeration capacity are found around 300 K in x=0.07.

Magnetic, transport, and magnetocaloric properties of boron doped Ni-Mn-In alloys

Energy Technology Data Exchange (ETDEWEB)

Pandey, S.; Quetz, A.; Aryal, A.; Dubenko, I.; Ali, N. [Department of Physics, Southern Illinois University, Carbondale, Illinois 62902 (United States); Rodionov, I. D.; Blinov, M. I.; Titov, I. S.; Prudnikov, V. N.; Granovsky, A. B. [Faculty of Physics, Lomonosov Moscow State University, Moscow 119991 (Russian Federation); Stadler, S. [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, Louisiana 70803 (United States)

2015-05-14

The impact of B substitution in Ni{sub 50}Mn{sub 35}In{sub 15−x}B{sub x} Heusler alloys on the structural, magnetic, transport, and parameters of the magnetocaloric effect (MCE) has been studied by means of room-temperature X-ray diffraction and thermomagnetic measurements (in magnetic fields (H) up to 5 T, and in the temperature interval 5–400 K). Direct adiabatic temperature change (ΔT{sub AD}) measurements have been carried out for an applied magnetic field change of 1.8 T. The transition temperatures (T-x) phase diagram has been constructed for H = 0.005 T. The MCE parameters were found to be comparable to those observed in other MCE materials such as Ni{sub 50}Mn{sub 34.8}In{sub 14.2}B and Ni{sub 50}Mn{sub 35}In{sub 14}X (X=In, Al, and Ge) Heusler alloys. The maximum absolute value of ΔT{sub AD} = 2.5 K was observed at the magnetostructural transition for Ni{sub 50}Mn{sub 35}In{sub 14.5}B{sub 0.5}.

Drivers and barriers of reverse logistics practices: A study of large grocery retailers in South Africa

Directory of Open Access Journals (Sweden)

Arno Meyer

2017-08-01

Full Text Available Background: Reverse logistics (RL practices have previously been viewed as a cost drain, but have received greater attention from practitioners because of increasing competition and dwindling margins. Purpose: The purpose of this generic qualitative study was to uncover the main internal and external drivers and barriers of RL within major South African grocery retailers. Method: Eleven face-to-face, semi-structured interviews and one telephonic interview were conducted with participants from four large grocery retailers. Findings: Optimising profitability and cost reduction goals are the identified internal drivers, whereas the main external driver was to reduce the organisations’ environmental impact. A lack of information systems – such as enterprise resource planning systems or warehouse management system software – and infrastructure were revealed as the main internal barriers for organisations’ RL practices, whereas supplier non-compliance and transportation inefficiencies were the main external barriers exposed. Managerial implications: In order to optimise the efficiency of the reverse flow, managers are recommended to devote more capital to RL infrastructure, develop policies to manage supplier behaviour, focus on RL as a revenue generating stream as well as implement information systems to manage the entire reverse flow. Conclusion: All participating grocery retailers follow similar RL processes. Growth in RL practices as well as infrastructure to perform those practices is a future priority for all the reviewed grocery retailers. RL is no longer only a key cost driver, but also provides organisations with many additional opportunities.

Reversal of severe mitral regurgitation by device closure of a large patent ductus arteriosus in a premature infant.

Science.gov (United States)

Kheiwa, Ahmed; Ross, Robert D; Kobayashi, Daisuke

2017-01-01

We report a critically ill premature infant with severe mitral valve regurgitation associated with pulmonary hypertension and a severely dilated left atrium from a large patent ductus arteriosus. The mitral valve regurgitation improved significantly with normalisation of left atrial size 4 weeks after percutaneous closure of the patent ductus arteriosus. This case highlights the potential reversibility of severe mitral valve regurgitation with treatment of an underlying cardiac shunt.

Structural, magnetic and magnetocaloric properties of AMn{sub 1-x}Ga{sub x}O{sub 3} compounds with 0{<=}x{<=}0.2

Energy Technology Data Exchange (ETDEWEB)

Omri, A., E-mail: omriaref@yahoo.fr [Laboratoire de Physique Appliquee, Faculte des Sciences de Sfax, Universite de Sfax, BP 1171, Sfax 3000 (Tunisia); Bejar, M. [Laboratoire de Physique Appliquee, Faculte des Sciences de Sfax, Universite de Sfax, BP 1171, Sfax 3000 (Tunisia); Sajieddine, M. [Laboratoire de Physique et Mecanique des Materiaux, Faculte des Sciences et Techniques, BP 523, 23000, Beni-Mellal-Universite Sultan Moulay Sliman, Maroc (Morocco); Dhahri, E. [Laboratoire de Physique Appliquee, Faculte des Sciences de Sfax, Universite de Sfax, BP 1171, Sfax 3000 (Tunisia); Hlil, E.K. [Institut Neel, CNRS-Universite J. Fourier, BP 166, 38042 Grenoble (France); Es-Souni, M. [University of Applied Sciences, Institute for Materials and Surface Technology, Grenzstrasse 3, Kiel (Germany)

2012-07-01

Structural, magnetic and magnetocaloric properties of manganites series with the AMn{sub 1-x}Ga{sub x}O{sub 3} (A=La{sub 0.75}Ca{sub 0.08}Sr{sub 0.17} and x=0, 0.05, 0.1 and 0.2) composition have been investigated to shed light on Ga-doping influence. Solid-state reaction method was used for preparation. From XRD study, all samples are found single phase and crystallize in the orthorhombic structure with the Pnma space group. The variation of the magnetization M vs. temperature T, under an applied magnetic field of 0.05 T, reveals a ferromagnetic-paramagnetic transition for all samples. The experimental results indicate that T{sub C} decreases from 336 to 135 K with increasing Ga substitution. Magnetocaloric effect (MCE) was estimated, in terms of isothermal magnetic entropy change (-{Delta}S{sub M}), using the M(T, {mu}{sub 0}H) data and employing the thermodynamic Maxwell equation. The maximum entropy change and Relative Cooling Power (RCP) show non-monotonic behaviors with increasing the concentration of Gallium. In fact, the maximum value of {Delta}S{sub Mmax}of AMn{sub 1-x}Ga{sub x}O{sub 3} for x=0.00 and 0.2 samples is found to be, respectively, 2.87 and 1.17 J/kg/K under an applied magnetic field change of 2 T. For the same applied magnetic field ({mu}{sub 0}H=2 T), the RCP values are found to vary between 97.58 and 89 J/kg.

New aspects of magnetocaloric effect in NiMn{sub 0.89}Cr{sub 0.11}Ge

Energy Technology Data Exchange (ETDEWEB)

Jaworska-Gołąb, T., E-mail: teresa.jaworska-golab@uj.edu.pl [Institute of Physics, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków (Poland); Baran, S. [Institute of Physics, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków (Poland); Duraj, R. [Institute of Physics, Cracow University of Technology, Podchorążych 1, 30-084 Kraków (Poland); Marzec, M. [Institute of Physics, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków (Poland); Dyakonov, V. [Institute of Physics, Polish Academy of Sciences, al. Lotników 32/46, 02-668 Warszawa (Poland); A.A. Galkin Donetsk Physico-Technical Institute, 83-114 Donetsk (Ukraine); Sivachenko, A. [A.A. Galkin Donetsk Physico-Technical Institute, 83-114 Donetsk (Ukraine); Tyvanchuk, Yu. [Chemistry Department, Ivan Franko National University of Lviv, 79-005 Lviv (Ukraine); Szymczak, H. [Institute of Physics, Polish Academy of Sciences, al. Lotników 32/46, 02-668 Warszawa (Poland); Szytuła, A. [Institute of Physics, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków (Poland)

2015-07-01

Investigations of structural and magnetic phase transitions in the NiMn{sub 0.89}Cr{sub 0.11}Ge half-Heusler alloy were carried out by DSC, XRD (80–400 K), magnetic susceptibility and magnetization (1.9–400 K, magnetic field up to 9.0 T, pressure up to 5.25 kbar) measurements. At high temperatures the sample is a single phase crystallizing in the hexagonal crystal structure (Ni{sub 2}In-type, space group P6{sub 3}/mmc) while below 260 K, down to 100 K, some amount of the hexagonal phase coexists with the orthorhombic (TiNiSi-type, space group Pnma) one. Strong magnetostructural coupling is observed. Magnetic data indicate that with increasing temperature magnetic properties of the sample change from antiferro- to ferro- and then to paramagnetic ones. The latter magnetic phase transition is associated with the crystal structure change and results in large magnetic entropy change equal to −51 J/kg K at μ{sub 0}H= 9.0 T near 260 K. Application of external pressure shifts T{sub C} towards lower temperatures. - Highlights: • # Pnma below 210 K, # P6{sub 3}/mmc above 260 K, for 210 K magnetocaloric effect observed about 260 K at ambient pressure. • Magnetostructural effect observed at 260 K (ΔV/V= 2.4%) at ambient pressure. • Magnetic measurements under hydrostatic pressure up to 5.25 kbar; (p, T) diagram.

Magnetic and magnetocaloric properties in La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3} exhibiting first-order and second-order magnetic phase transitions

Energy Technology Data Exchange (ETDEWEB)

Ho, T.A. [Department of Materials Science and Engineering, Korea University, Seoul 136-713 (Korea, Republic of); Dang, N.T. [Institute of Research and Development, Duy Tan University, Da Nang (Viet Nam); Phan, The-Long [Department of Physics and Oxide Research Center, Hankuk University of Foreign Studies, Yongin 449-791 (Korea, Republic of); Yang, D.S. [Physics Division, School of Science Education, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Lee, B.W. [Department of Physics and Oxide Research Center, Hankuk University of Foreign Studies, Yongin 449-791 (Korea, Republic of); Yu, S.C., E-mail: scyu@chungbuk.ac.kr [Department of Physics, Chungbuk National University, Cheongju 361-763 (Korea, Republic of)

2016-08-15

Polycrystalline orthorhombic samples La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3} (x = 0–0.09) were prepared by solid-state reaction. The study of magnetic properties revealed that the ferromagnetic-paramagnetic (FM-PM) transition temperature (T{sub C}) increases from 255 to about 271 K with increasing Na-doping content (x) from 0 to 0.09, respectively. Around the T{sub C}, we have found the samples showing a large magnetocaloric (MC) effect with maximum values of magnetic entropy change (|ΔS{sub max}|) of 7–8 J kg{sup −1} K{sup −1} and relative cooling power RCP = 232–236 J/kg for the samples x = 0.03–0.09 in a magnetic-field interval ΔH = 40 kOe. Detailed analyses of isothermal magnetization data M(T, H) based on Banerjee's criteria indicated a first-to-second-order magnetic-phase transformation taking place at a threshold Na-doping concentration x{sub c} ≈ 0.06. This could also be observed clearly from the feature of entropy universal curves. An assessment of the magnetic-ordering exponent N = dLn|ΔS{sub m}|/dLnH demonstrates an existence of short-range magnetic order in the samples. We believe that the changes of the magnetic properties and MC effect in La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3} caused by Na doping are related to the changes in the structural parameters and Mn{sup 4+}/Mn{sup 3+} ratio, which are confirmed by the geometrical and electronic analyses based on X-ray diffraction and X-ray absorption fine structure. - Highlights: • Geometrical and electronic structures of La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3}. • Threshold of first-to-second-order phase transformation in La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3}. • Large magneto-caloric effect with |ΔS{sub max}| ≈ 7–8 J kg{sup −1} K{sup −1}, and RCP = 232–236 J/kg. • Universal curve of magnetic-entropy change.

Effects of the partial substitution of Ni by Cr on the transport, magnetic, and magnetocaloric properties of Ni50Mn37In13

Directory of Open Access Journals (Sweden)

Sudip Pandey

2017-05-01

Full Text Available The structural, magnetic, and magnetotransport properties of Ni50-xCrxMn37In13 Heusler alloys have been synthesized and investigated by x-ray diffraction (XRD, field and pressure dependent magnetization, and electrical resistivity measurements. The partial substitution of Ni by Cr in Ni50Mn37In13 significantly improves the magnetocaloric effect in the vicinity of the martensitic transition (TM. This system also shows a large negative entropy change at the Curie temperature (TC, making it a candidate material for application in a refrigeration cycle that exploits both positive and negative magnetic entropy changes. The refrigeration capacity (RC values at TM and TC increase significantly by more than 20 % with Cr substitution. The application of hydrostatic pressure increases the temperature stability of the martensitic phase in Ni45Cr5Mn37In13. The influence of Cr substitution on the transport properties of Ni48Cr2Mn37In13 is discussed. An asymmetric magnetoresistance, i.e., a spin-valve-like behavior, has been observed near TM for Ni48Cr2Mn37In13.

Effect of Bi substitution on the magnetic and magnetocaloric properties of Ni50Mn35In15-xBix Heusler alloys

Science.gov (United States)

Aryal, Anil; Quetz, Abdiel; Pandey, Sudip; Dubenko, Igor; Stadler, Shane; Ali, Naushad

2018-05-01

The structural, magnetic, magnetocaloric, and transport properties of Ni50Mn35In15-xBix (x = 0, 0.25, 0.5, 1, 1.5) compounds has been studied through X-ray diffraction (XRD), differential scanning calorimetry, and magnetization measurements. A mixture of high temperature austenite phase (AP) and low temperature martensitic phase (MP) was observed from the XRD at room temperature. The saturation magnetization MS at 10 K was found to decrease with increasing Bi content. A shift in the martensitic transition temperature (TM) relative to the parent compound was observed with a maximum shift of ˜ 36 K for x = 1.5. Abnormal shifts in TC and TM to higher temperatures were observed at high field for x ≥ 0.5. Large magnetic entropy changes (ΔSM) of about 40 J/kg K (x = 0) and 34 J/kg K (x = 0.25) were observed at TM with H = 5 T, which reduced significantly for higher Bi concentrations. The doping of small amounts of Bi in the In sites increased the peak width of the ΔSM curves at the second order transition, leading to larger values of relative cooling power. A significant magnetoresistance (-30%) was observed near TM with ΔH = 5T for x = 0.5.

Study of magnetic, structural and magnetocaloric properties of La.sub.0.6./sub.Pr.sub.0.4./sub.Mn.sub.2./sub.Si.sub.2./sub. under high pressures and magnetic field

Czech Academy of Sciences Publication Activity Database

Kaštil, Jiří; Arnold, Zdeněk; Isnard, O.; Skourski, Y.; Kamarád, Jiří; Itié, J.P.

2017-01-01

Roč. 424, Feb (2017), s. 416-420 ISSN 0304-8853 R&D Projects: GA ČR GA15-03777S Institutional support: RVO:68378271 Keywords : magnetization * compressibility * magnetocaloric effect * high pressure Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 2.630, year: 2016

Structural, magnetic and magnetocaloric properties of polycrystalline La{sub 0.67}Ba{sub 0.33-x}Zn{sub x}MnO{sub 3} (x = 0.15 and 0.2) manganites

Energy Technology Data Exchange (ETDEWEB)

Zaidi, Asma; Mohamed, Z.; Dhahri, J. [University of Monastir, Laboratory of Condensed Matter and Nanosciences, Monastir (Tunisia); Hlil, E.K. [CNRS, University of Joseph Fourier, Institut Neel, Grenoble (France); Alharbi, T.; Zaidi, M. [Majmaah University, College of Science of Zulfi, Al Majmaah (Saudi Arabia)

2016-04-15

We report on the structural, magnetic and magnetocaloric properties of manganite La{sub 0.67}Ba{sub 0.33-x}Zn{sub x}MnO{sub 3} (x=0.15 and 0.2). X-ray diffraction studies show that all samples crystallize with the rhombohedral symmetry within the space group R anti 3c. The magnetic and magnetocaloric properties of polycrystalline perovskite were investigated from the measured magnetization data of the samples as a function of the applied magnetic field. The associated magnetic entropy change close to their respective Curie temperature T{sub C} and the relative cooling power (RCP) have been determined. It was found that the maximum change in magnetic entropy of La{sub 0.67}Ba{sub 0.33-x}Zn{sub x}MnO{sub 3} samples reached 3.4 J/kg K at T{sub C}=260 K for a magnetic field of 5 T and RCP=223.77 J/kg. In view of these results, La{sub 0.67}Ba{sub 0.33-x}Zn{sub x}MnO{sub 3} compounds are potential candidates for magnetic refrigeration. (orig.)

Magnetocaloric properties in La{sub 1−x}Ca{sub x}MnO{sub 3} thin films: Monte Carlo simulations

Energy Technology Data Exchange (ETDEWEB)

Restrepo-Parra, E., E-mail: erestrepopa@unal.edu.co; Ramos-Rivera, L.; Londoño-Navarro, J.

2014-02-15

The magnetocaloric effect (MCE) of La{sub 1−x}Ca{sub x}MnO{sub 3} was analyzed when varying the stoichiometry (x=0.2, 0.33, 0.4 and 0.5) and the external applied magnetic field. Simulations were carried out using the Monte Carlo method having a configuration ascribed by the set S{sub z} of all-site spin projections, under the Metropolis algorithm. La{sub 1−x}Ca{sub x}MnO{sub 3} is characterized for three types of magnetic ions corresponding to Mn{sup 4+} (S=3/2), which are bonded to Ca{sup 2+}, and Mn{sup 3+}(e{sub g}) and Mn{sup 3+}(e{sub g′}, S=2), which are both bonded to La{sup 3+}. Different interactions must be considered depending on the type of interacting ions. The entropy change ΔS in an isothermal process as well as the temperature change ΔT in an adiabatic process was determined with this model. Both ΔS and ΔT show stoichiometry-dependent maximums near the paramagnetic–ferromagnetic transition temperature (T{sub C}), confirming the order–disorder change at this temperature. The strong dependence in La{sub 1−x}Ca{sub x}MnO{sub 3} of the MCE on the stoichiometry and the external magnetic field makes this phenomenon important for different technological applications, particularly in refrigeration. - Highlights: • Thermal behavior of entropy, susceptibility and isothermal entropy change is studied. • ΔS and ΔT present a transition at the critical temperature depending on the stoichiometry. • Semi-classical Heisenberg Hamiltonian allows simulation of magnetocaloric effect in LCMO. • External magnetic field produces changes in ΔS and ΔT observed in the shifting of T{sub C}.

Reversal of subtidal dune asymmetries caused by seasonally reversing wind-driven currents in Torres Strait, northeastern Australia

Science.gov (United States)

Harris, Peter T.

1991-07-01

Large subtidal sand dunes (sandwaves) located in Adolphus Channel, Torres Strait, have been observed to reverse their asymmetric orientation between September-February. This has been attributed to a reversal in wind-driven currents, which flow westward during the SE trade season (April-November) and eastwards during the NW monsoon season [December-March: HARRIS (1989) Continental Shelf Research, 9, 981-1002]. Observations in September 1988 and February 1989 from another area of dunes in Torres Strait corroborate this asymmetry reversal pattern. The results indicate that such reversals may be common in Torres Strait and in other areas where subtidal bedforms are subject to modification by superimposed, seasonally reversing, wind-driven currents.

Magnetic properties and magnetocaloric effects in Mn1.2Fe0.8P1-xGex compounds

International Nuclear Information System (INIS)

Ou, Z Q; Wang, G F; Lin Song; Tegus, O; Brueck, E; Buschow, K H J

2006-01-01

We have studied the magnetic properties and magnetocaloric effects in the Mn 1.2 Fe 0.8 P 1-x Ge x compounds with x = 0.2, 0.22, 0.3, 0.4 and 0.5. X-ray diffraction patterns show that the Mn 1.2 Fe 0.8 P 1-x Ge x compounds crystallize in the hexagonal Fe 2 P-type crystal structure. The magnetic moments of the Mn 1.2 Fe 0.8 P 1-x Ge x compounds measured at 5 K and 5 T increase with increasing Ge content. The Curie temperature increases strongly and the magnetic entropy change has a maximum around 233 K for the compound with x = 0.22, which is about 19 and 31 J kg -1 K -1 for a field change of 2 and 5 T, respectively

Structural, magnetic and magnetocaloric properties of La{sub 0.8}Ca{sub 0.2−x}Na{sub x}MnO{sub 3} manganites (0≤x≤0.2)

Energy Technology Data Exchange (ETDEWEB)

Choura Maatar, S. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); M’nassri, R. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Institut NEEL, CNRS, B.P.166, 38042 Grenoble Cedex 9 (France); Cheikhrouhou Koubaa, W., E-mail: wissem.koubaa@yahoo.fr [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Koubaa, M. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Cheikhrouhou, A. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Centre de Recherche en Informatique, Multimédia et Traitement Numérique des Données, Technopole de Sfax, Cité El Ons, Route de Tunis, Km 9, Sfax. B.P. 275, Sakiet Ezzit, 3021 Sfax (Tunisia)

2015-05-15

In this work, we report the effect of Na doping on the structural, magnetic and magnetocaloric properties in La{sub 0.8}Ca{sub 0.2−x}Na{sub x}MnO{sub 3} powder samples. Our polycristalline samples have been synthesized using the solid-state reaction method at high temperatures. The parent compound La{sub 0.8}Ca{sub 0.2}MnO{sub 3} crystallizes in the orthorhombic system with Pbnm space group. Na doping induces a structural transition from orthorhombic (Pbnm space group) to rhombohedral (R-3C space group) symmetry. Magnetization measurements versus temperature in a magnetic applied field of 50 mT showed that all our investigated samples display a paramagnetic-ferromagnetic transition with decreasing temperature. The Curie temperature T{sub C} increases with Na content from 240 K for x=0 to 330 K for x=0.2. A large magnetocaloric effect has been observed in all samples, the maximum entropy change, |∆S{sub M}|{sub max}, shifts to smaller values with increasing Na content, from4.56 J/kg K (x=0.05) to 2.3 J/kg K (x=0.2) under a magnetic field change ∆µ{sub 0}H of 2 T. For the same applied magnetic field of 2 T, the Relative Cooling Power (RCP) values are found to be constant around 91 J/kg. - Graphical abstract: Sodium doping induces an increase of T{sub C} from 240 K for x=0 to 330 K for x=0.2. - Highlights: • La{sub 0.8}Ca{sub 0.2−x}Na{sub x}MnO{sub 3} are synthesized using the ceramic method at high temperatures. • Na doping induces a structural transition from Pbnm to R-3C space group. • T{sub C} increases with Na content from 240 K for x=0 to 330 K for x=0.2. • RCP is constant around 91 J/kg for all compounds under 2 T.

Magnetocaloric effect in the La0.8Ce0.2Fe11.4-xCoxSi1.6 compounds

International Nuclear Information System (INIS)

Wang, G.F.; Song, L.; Li, F.A.; Ou, Z.Q.; Tegus, O.; Brueck, E.; Buschow, K.H.J.

2009-01-01

The effects of substitution of Co for Fe on the magnetic and magnetocaloric properties of La 0.8 Ce 0.2 Fe 11.4-x Co x Si 1.6 (0, 0.2, 0.4, 0.6, 0.8 and 1.0) compounds have been investigated. X-ray diffraction shows that all compounds crystallize in the NaZn 13 -type structure. Magnetic measurements show that the Curie temperature (T C ) can be tuned between 184 and 294 K by changing the Co content from 0 to 1. A field-induced methamagnetic transition occurs in samples with x=0, 0.2 and 0.4. The magnetic entropy changes of the compounds have been determined from the isothermal magnetization measurements by using the Maxwell relation.

Negative thermal expansion and magnetocaloric effect in Mn-Co-Ge-In thin films

Science.gov (United States)

Liu, Y.; Qiao, K. M.; Zuo, S. L.; Zhang, H. R.; Kuang, H.; Wang, J.; Hu, F. X.; Sun, J. R.; Shen, B. G.

2018-01-01

MnCoGe-based alloys with magnetostructural transition show giant negative thermal expansion (NTE) behavior and magnetocaloric effects (MCEs) and thus have attracted a lot of attention. However, the drawback of bad mechanical behavior in these alloys obstructs their practical applications. Here, we report the growth of Mn-Co-Ge-In films with thickness of about 45 nm on (001)-LaAlO3, (001)-SrTiO3, and (001)-Al2O3 substrates. The films grown completely overcome the breakable nature of the alloy and promote its multifunctional applications. The deposited films have a textured structure and retain first-order magnetostructural transition. NTE and MCE behaviors associated with the magnetostructural transition have been studied. The films exhibit a completely repeatable NTE around room temperature. NTE coefficient α can be continuously tuned from the ultra-low expansion (α ˜ -2.0 × 10-7/K) to α ˜ -6.56 × 10-6/K, depending on the growth and particle size of the films on different substrates. Moreover, the films exhibit magnetic entropy changes comparable to the well-known metamagnetic films. All these demonstrate potential multifunctional applications of the present films.

Thermal stability and magnetocaloric properties of GdDyAlCo bulk metallic glasses

Energy Technology Data Exchange (ETDEWEB)

Liang, L. [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Hui, X. [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China)], E-mail: huixd01@hotmail.com; Chen, G.L. [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China)

2008-01-25

Gd{sub 56-x}Dy{sub x}Al{sub 24}Co{sub 20} (x = 16, 20 and 22) bulk metallic glasses (BMGs) alloys with a diameter of 2, 3 and 3 mm, respectively, were prepared by using copper mold casting. These alloys exhibit higher values of the glass transition temperature, crystallization temperature, and activation energy of the glass transition and crystallization, compared with those of other known rare-earth-based BMGs. A maximum magnetic entropy changes of 15.78 J/(kg K) is obtained in Gd{sub 40}Dy{sub 16}Al{sub 24}Co{sub 20}, which is the maximal among all the bulk metallic glasses, and is much larger than those of the known crystalline magnetic refrigerant compound Gd{sub 5}Si{sub 2}Ge{sub 1.9}Fe{sub 0.1} and pure Gd metal. All the three BMG alloys have a broader temperature range of the entropy change peak, resulting in larger refrigerate capacities (RC) than those of conventional crystalline materials. The excellent magnetocaloric properties combining with high thermal stability make them an attractive candidate for magnetic refrigerants in the temperature range of 20-100 K.

Magnetic and magnetocaloric properties of itinerant-electron system Hf{sub 1−x}Ta{sub x}Fe{sub 2} (x = 0.125 and 0.175)

Energy Technology Data Exchange (ETDEWEB)

Diop, L.V.B. [Univ. Grenoble Alpes, Inst NEEL, F-38042 Grenoble (France); CNRS, Inst NEEL, F-38042 Grenoble (France); Kastil, J. [Univ. Grenoble Alpes, Inst NEEL, F-38042 Grenoble (France); CNRS, Inst NEEL, F-38042 Grenoble (France); Institute of Physics AS CR v.v.i., Na Slovance 2, 182 21 Prague 8 (Czech Republic); Isnard, O. [Univ. Grenoble Alpes, Inst NEEL, F-38042 Grenoble (France); CNRS, Inst NEEL, F-38042 Grenoble (France); Arnold, Z.; Kamarad, J. [Institute of Physics AS CR v.v.i., Na Slovance 2, 182 21 Prague 8 (Czech Republic)

2015-04-05

Highlights: • First report of the direct measurement of ΔT{sub ad} in Hf{sub 1−x}Ta{sub x}Fe{sub 2} compounds. • ΔT{sub ad} reach values of 2.5 K under μ{sub 0}ΔH = 3 T for x = 0.175 compound. • A field induced metamagnetic phase transition has been observed. - Abstract: Intrinsic magnetic properties and magnetocaloric effect (MCE) have been investigated for Hf{sub 1−x}Ta{sub x}Fe{sub 2} (x = 0.125 and 0.175) itinerant-electron compounds which exhibit a temperature-induced transition from the ferromagnetic (FM) to the antiferromagnetic (AFM) state. Upon increasing Ta concentration, the ferromagnetic ordering temperature strongly decreases with decreasing the lattice parameters and both the isothermal magnetic entropy change ΔS{sub M} and the adiabatic temperature change ΔT{sub ad} are enhanced. An adiabatic temperature change of ΔT{sub ad} = 2 and 2.5 K was observed in Hf{sub 0.875}Ta{sub 0.125}Fe{sub 2} and Hf{sub 0.825}Ta{sub 0.175}Fe{sub 2}, respectively, for a magnetic field change of 3 T. Therefore, the partial substitution of Ta for Hf is highly effective in the enhancement of the magnetocaloric effect in Hf{sub 1−x}Ta{sub x}Fe{sub 2} systems. In addition substitution can be used to tune both the transition temperature but also the magnetic transition from first toward second order type.

Magnetic, structural and magnetocaloric properties of Ni-Si and Ni-Al thermoseeds for self-controlled hyperthermia.

Science.gov (United States)

Pandey, Sudip; Quetz, Abdiel; Aryal, Anil; Dubenko, Igor; Mazumdar, Dipanjan; Stadler, Shane; Ali, Naushad

2017-11-01

Self-controlled hyperthermia is a non-invasive technique used to kill or destroy cancer cells while preserving normal surrounding tissues. We have explored bulk magnetic Ni-Si and Ni-Al alloys as a potential thermoseeds. The structural, magnetic and magnetocaloric properties of the samples were investigated, including saturation magnetisation, Curie temperature (T C ), and magnetic and thermal hysteresis, using room temperature X-ray diffraction and magnetometry. The annealing time, temperature and the effects of homogenising the thermoseeds were studied to determine the functional hyperthermia applications. The bulk Ni-Si and Ni-Al binary alloys have Curie temperatures in the desired range, 316 K-319 K (43 °C-46 °C), which is suitable for magnetic hyperthermia applications. We have found that T C strictly follows a linear trend with doping concentration over a wide range of temperature. The magnetic ordering temperature and the magnetic properties can be controlled through substitution in these binary alloys.

Optimization of Regenerators for AMRR Systems

Energy Technology Data Exchange (ETDEWEB)

Nellis, Gregory [University of Wisconsin, Madison, WI (United States); Klein, Sanford [University of Wisconsin, Madison, WI (United States); Brey, William [University of Wisconsin, Madison, WI (United States); Moine, Alexandra [University of Wisconsin, Madison, WI (United States); Nielson, Kaspar [University of Wisconsin, Madison, WI (United States)

2015-06-18

Active Magnetic Regenerative Refrigeration (AMRR) systems have no direct global warming potential or ozone depletion potential and hold the potential for providing refrigeration with efficiencies that are equal to or greater than the vapor compression systems used today. The work carried out in this project has developed and improved modeling tools that can be used to optimize and evaluate the magnetocaloric materials and geometric structure of the regenerator beds required for AMRR Systems. There has been an explosion in the development of magnetocaloric materials for AMRR systems over the past few decades. The most attractive materials, based on the magnitude of the measured magnetocaloric effect, tend to also have large amounts of hysteresis. This project has provided for the first time a thermodynamically consistent method for evaluating these hysteretic materials in the context of an AMRR cycle. An additional, practical challenge that has been identified for AMRR systems is related to the participation of the regenerator wall in the cyclic process. The impact of housing heat capacity on both passive and active regenerative systems has been studied and clarified within this project. This report is divided into two parts corresponding to these two efforts. Part 1 describes the work related to modeling magnetic hysteresis while Part 2 discusses the modeling of the heat capacity of the housing. A key outcome of this project is the development of a publically available modeling tool that allows researchers to identify a truly optimal magnetocaloric refrigerant. Typically, the refrigeration potential of a magnetocaloric material is judged entirely based on the magnitude of the magnetocaloric effect and other properties of the material that are deemed unimportant. This project has shown that a material with a large magnetocaloric effect (as evidenced, for example, by a large adiabatic temperature change) may not be optimal when it is accompanied by a large hysteresis

Magnetic field dependence of Griffith phase and magnetocaloric effect in Ca0.85Dy0.15MnO3

Science.gov (United States)

Nag, Ripan; Sarkar, Bidyut; Pal, Sudipta

2018-03-01

Temperature and Magnetic field dependent magnetization properties of electron doped polycrystalline sample Ca0.85Dy0.15MnO3 (CDMO) prepared by solid state reaction method have been studied. The sample undergoes ferromagnetic to paramagnetic phase transition at about 111k. From the study of magnetic properties in terms of Arrot plots it is observed that the phase transition is of 2nd order. The Griffith phase behavior of the sample is suppressed with the increase of the applied magnetic field strength H. We have estimated the magnetic entropy change from experimental magnetization and temperature data. For a magnetic field change of 8000 Oe, the maximum value of magnetic entropy change arrives at a value of 1.126 J-kg-1 k-1 in this magnetocaloric material.

Giant irreversible positive to large reversible negative magnetic entropy change evolution in Tb-based bulk metallic glass

International Nuclear Information System (INIS)

Luo Qiang; Schwarz, Bjoern; Mattern, Norbert; Eckert, Juergen

2010-01-01

We study the effects of amorphous structure and random anisotropy on the magnetic entropy change in a series of Tb-based amorphous alloys. The amorphous structure broadens the peak of magnetic entropy change and facilitates the adjustment of properties. The peak magnetic entropy change above the spin freezing temperature first depends on the average magnetic moment approximately linearly and second on the exchange interaction and random anisotropy. Large and broad reversible negative magnetic entropy changes are observed above the spin freezing temperature and giant positive irreversible magnetic entropy changes which associate with the internal entropy production are obtained well below.

Table-like magnetocaloric effect in Gd{sub 56}Ni{sub 15}Al{sub 27}Zr{sub 2} alloy and its field independence feature

Energy Technology Data Exchange (ETDEWEB)

Agurgo Balfour, E.; Ma, Z.; Fu, H., E-mail: fuhao@uestc.edu.cn, E-mail: rockingsandstorm@163.com; Wang, L.; Luo, Y. [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054 (China); Hadimani, R. L.; Jiles, D. C. [Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011 (United States); Ames Laboratory, U.S. Department of Energy, Ames, Iowa 50011 (United States); Wang, S. F., E-mail: fuhao@uestc.edu.cn, E-mail: rockingsandstorm@163.com [North Electronic Device Research Institute, Beijing 100141 (China)

2015-09-28

In order to obtain “table-like” magnetocaloric effect (MCE), multiple-phase Gd{sub 56}Ni{sub 15}Al{sub 27}Zr{sub 2} alloy was prepared by arc-melting followed by suck-casting method. Powder x-ray diffraction and calorimetric measurements reveal that the sample contains both glassy and crystalline phases. The fraction of the glassy phase is about 62%, estimated from the heat enthalpy of the crystallization. The crystalline phases, Gd{sub 2}Al and GdNiAl further broadened the relatively wider magnetic entropy change (−ΔS{sub M}) peak of the amorphous phase, which resulted in the table-like MCE over a maximum temperature range of 52.5 K to 77.5 K. The plateau feature of the MCE was found to be nearly independent of the applied magnetic field from 3 T to 5 T. The maximum −ΔS{sub M} value of the MCE platforms is 6.0 J/kg K under applied magnetic field change of 5 T. Below 3 T, the field independence of the table-like feature disappears. The relatively large constant values of −ΔS{sub M} for the respective applied magnetic fields have promising applications in magnetic refrigeration using regenerative Ericsson cycle.

Reverse preferential spread in complex networks

Science.gov (United States)

Toyoizumi, Hiroshi; Tani, Seiichi; Miyoshi, Naoto; Okamoto, Yoshio

2012-08-01

Large-degree nodes may have a larger influence on the network, but they can be bottlenecks for spreading information since spreading attempts tend to concentrate on these nodes and become redundant. We discuss that the reverse preferential spread (distributing information inversely proportional to the degree of the receiving node) has an advantage over other spread mechanisms. In large uncorrelated networks, we show that the mean number of nodes that receive information under the reverse preferential spread is an upper bound among any other weight-based spread mechanisms, and this upper bound is indeed a logistic growth independent of the degree distribution.

Towards the large scale production of (La{sub 1-z}Ce{sub z})(Fe{sub 1-x-y}Mn{sub y}Si{sub x}){sub 13}H{sub n} products for room temperature refrigeration

Energy Technology Data Exchange (ETDEWEB)

Mayer, Charlotte; Dubrez, Alexandra; Pierronnet, Michel; Vikner, Peter [Erasteel SAS, Tour Maine Montparnasse, Paris (France)

2014-05-15

In this paper, we present a novel process based on gas atomization and powder metallurgy techniques to produce reliable and stable (La{sub 1-z}Ce{sub z})(Fe{sub 1-x-y}Mn{sub y}Si{sub x}){sub 13}H{sub n} materials, with 0.08 ≤ x ≤ 0.15, 0 ≤ y ≤ 0.05, 0 ≤ z ≤ 0.3 and 1.5 ≤ n ≤ 3. With this process, shaped pieces ready-to-use into refrigeration devices can be produced. Gas atomisation is a rapid solidification technique that prevents the La-Fe-Si-type alloy from forming very large α-Fe dendrites during cooling, allowing to easily and efficiently heat treat the obtained powder to form the magnetocaloric NaZn{sub 13}-type intermetallic. In this process, a batch of 500 kg of alloy was first gas atomized into powder. The powder was then annealed at 1373 K under Ar for one hour to reach around 95% of magnetocaloric phase, and subsequently hydrogenated. Finally, the powder was shaped into composite shaped products containing 91.5 wt.% of powder, by extrusion. This process induces no loss of matter and allows producing non fragile pieces comprising thin portions. Our first results on the stability of partially hydrogenated (La,Ce)(Fe,Mn,Si){sub 13} materials are shown and we discuss on the possible existence of conditions of instability liked to both the composition of the magnetocaloric phase and the level of hydrogenation. (copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Tuning the magnetocaloric properties of La0.7Ca0.3MnO3 manganites through Ni-doping

Science.gov (United States)

Gómez, A.; Chavarriaga, E.; Supelano, I.; Parra, C. A.; Morán, O.

2018-04-01

The effect of Ni2+ doping on the magnetic and magnetocaloric properties of La0.7Ca0.3MnO3 manganites synthesized via the auto-combustion method is reported. The aim of studying Ni2+-substituted La0.7Ca0.3Mn1 - xNixO3 (x = 0 , 0.02 , 0.07, and 0.1) manganites was to explore the possibility of increasing the operating temperature range for the magnetocaloric effect through tuning of the magnetic transition temperature. X-ray diffraction analysis confirmed the phase purity of the synthesized samples. The substitution of Mn3+ ions by Ni2+ ions in the La0.7Ca0.3MnO3 lattice was also corroborated through this technique. The dependence of the magnetization on the temperature reveals that all the compositions exhibit a well-defined ferromagnetic to paramagnetic transition near the Curie temperature. A systematic decrease in the values of the Curie temperature is clearly observed upon Ni2+ doping. Probably the replacement of Mn3+ by Ni2+ ions in the La0.7Ca0.3MnO3 lattice weakens the Mn3+-O-Mn4+ double exchange interaction, which leads to a decrease in the transition temperature and the magnetic moment in the samples. By using Arrott plots, it was found that the phase transition from ferromagnetic to paramagnetic is second order. The maximum magnetic entropy changes observed for the x = 0 , 0.02 , 0.07, and 0.1 composites was 0.85, 0.77, 0.63, and 0.59 J/kg K, respectively, under a magnetic field of 1.5 T. In general, it was verified that the magnetic entropy change achieved for La0.7Ca0.3Mn1 - xNixO3 manganites synthesized via the auto-combustion method is higher than those reported for other manganites with comparable Ni2+-doping levels synthesized via standard solid state reaction. The addition of Ni2+ increases the value of the relative cooling power as compared to that of the parent compound. The highest value of this parameter (∼60 J/kg) is found for a Ni-doping level of 2% around 230 K in a field of 1.5 T.

Periodic feedwater reversal and air sparging as antifouling strategies in reverse electrodialysis

NARCIS (Netherlands)

Vermaas, D.A.; Kunteng, D.; Veerman, J.; Saakes, M.; Nijmeijer, K.

2014-01-01

Renewable energy can be generated using natural streams of seawater and river water in reverse electrodialysis (RED). The potential for electricity production of this technology is huge, but fouling of the membranes and the membrane stack reduces the potential for large scale applications. This

Magnetic hysterysis evolution of Ni-Al alloy with Fe and Mn substitution by vacuum arc melting to produce the room temperature magnetocaloric effect material

Energy Technology Data Exchange (ETDEWEB)

Notonegoro, Hamdan Akbar [PPS Materials Science, FMIPA-Universitas Indonesia, Depok 16424 (Indonesia); Mechanical Engineering Dept., FT-Universitas Sultan Ageng Tirtayasa, Cilegon 42435 (Indonesia); Kurniawan, Budhy; Manaf, Azwar, E-mail: azwar@sci.ui.ac.id [PPS Materials Science, FMIPA-Universitas Indonesia, Depok 16424 (Indonesia); Setiawan, Jan [Center for Nuclear Fuel Tecnology-Badan Tenaga Atom Nasional, Tangerang Selatan 15310 (Indonesia)

2016-06-17

The development of magnetocaloric effect (MCE) material is done in order to reduce the damage of the ozone layer caused by the chlorofluorocarbons (CFCs) emitted into the air. The research dealing with synthesis of magnetocaloric materials based of Ni-Al Heusler Alloy structure and by varying substitution some atoms of Ni with Fe and Al with Mn on Ni-Al Heusler Alloy structure to become Ni{sub 44}Fe{sub 6}Mn{sub 32}Al{sub 18}. Vacuum Arc Melting (VAM) equipment is used to form the alloys on vacuum condition and by flowing argon gas atmosphere and then followed by annealing process for 72 hours. X-Ray Diffraction (XRD) reveals that crystallite structure of material is observed. We define that Ni{sub 44}Fe{sub 6} as X{sub 2}, Mn{sub 25} as Y, and Al{sub 18}Mn{sub 7} as Z. Based on the XRD result, we observed that the general formula X{sub 2}YZ is not changed. The PERMAGRAF measurement revealed that there exists of magnetic hysterysis. The hysterysis show that the magnetic structures of the system undego evolution from diamagnetic to soft ferromagnetic material which all of the compound have the same crystallite structure. This evolution indicated that the change in the composition has led to changes the magnetic composition. Mn is the major element that gives strong magnetic properties to the sample. When Mn partially replaced position of Al, the sample became dominant to be influenced to improve their magnetic properties. In addition, substitution a part of Ni by Fe in the composition reveals a pinning of the domain walls in the sample.

Compact toroid injection fueling in a large field-reversed configuration

Science.gov (United States)

Asai, T.; Matsumoto, T.; Roche, T.; Allfrey, I.; Gota, H.; Sekiguchi, J.; Edo, T.; Garate, E.; Takahashi, Ts.; Binderbauer, M.; Tajima, T.

2017-07-01

A repetitively driven compact toroid (CT) injector has been developed for the large field-reversed configuration (FRC) facility of the C-2/C-2U, primarily for particle refueling. A CT is formed and injected by a magnetized coaxial plasma gun (MCPG) exclusively developed for the C-2/C-2U FRC. To refuel the particles of long-lived FRCs, multiple CT injections are required. Thus, a multi-stage discharge circuit was developed for a multi-pulsed CT injection. The drive frequency of this system can be adjusted up to 1 kHz and the number of CT shots per injector is two; the system can be further upgraded for a larger number of injection pulses. The developed MCPG can achieve a supersonic ejection velocity in the range of ~100 km s-1. The key plasma parameters of electron density, electron temperature and the number of particles are ~5  ×  1021 m-3, ~30 eV and 0.5-1.0  ×  1019, respectively. In this project, single- and double-pulsed counter CT injection fueling were conducted on the C-2/C-2U facility by two CT injectors. The CT injectors were mounted 1 m apart in the vicinity of the mid-plane. To avoid disruptive perturbation on the FRC, the CT injectors were operated at the lower limit of the particle inventory. The experiments demonstrated successful refueling with a significant density build-up of 20-30% of the FRC particle inventory per single CT injection without any deleterious effects on the C-2/C-2U FRC.

Tuning of normal and inverse magnetocaloric effect in Sm{sub 0.35}Pr{sub 0.15}Sr{sub 0.5}MnO{sub 3} phase separated manganites

Energy Technology Data Exchange (ETDEWEB)

Giri, S.K. [Department of Physics, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dasgupta, Papri; Poddar, A. [Experimental Condensed Matter Physics Division, Saha Institute of Nuclear Physics, West Bengal (India); Nath, T.K., E-mail: tnath@phy.iitkgp.ernet.in [Department of Physics, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India)

2015-05-15

Graphical abstract: ΔS{sub M} vs. T plots of nano (left) and bulk (right) samples at different magnetic fields. - Highlights: • Bulk to nano show first order FM → PM phase transition at low magnetic field. • Bulk sample exhibits normal and inverse MCE around T{sub C} and after T{sub g}, respectively. • The value of ΔS{sub M} at T{sub C} is almost three times larger than at T{sub g}. • The value of ΔS{sub M} also decreases with reduction of particles sizes. • The bulk sample also exhibits a large RCP of 43.5 J/kg for a magnetic field of 1 T. - Abstract: Magnetic and magnetocaloric properties of Sm{sub 0.35}Pr{sub 0.15}Sr{sub 0.5}MnO{sub 3} polycrystalline manganite (bulk and nanometric samples) are investigated in detail. It has been observed that all the particle sizes (bulk to nano) show first order ferromagnetic → paramagnetic phase transition at low magnetic field. Ferromagnetic transition temperature also decreases with decreasing the particle size. This suggests that ferromagnetism is weakened and the first order magnetic phase transition is softened. We have investigated the magnetocaloric effect (MCE) of both bulk and nanometric samples around their spin glass-like transition temperature, T{sub g} and Curie temperature, T{sub C}. It has been found that bulk sample exhibits both normal (i.e., negative ΔS{sub M}) and inverse (i.e., positive ΔS{sub M}) MCE around T{sub C} and after T{sub g}, respectively. The value of ΔS{sub M} (+3.17 J kg{sup −1} K{sup −1}) at T{sub C} is almost three times larger than at T{sub g} (ΔS{sub M} = −0.52 J kg{sup −1} K{sup −1}) for a magnetic field change of 7 T. The bulk sample also exhibits a large relative cooling power (RCP) of 43.5 J/kg for a magnetic field of 1 T. The corresponding adiabatic temperature change of bulk sample is observed to be ∼1.5 K for a magnetic field change of 3 T. The value of ΔS{sub M} also decreases with reduction of particles sizes. The temperature width of ΔS{sub M

The persistence of the magnetocaloric effect in (La1-x)A(x)(0.67)Ba0.33Mn1.05O3-δ

DEFF Research Database (Denmark)

Ancona-Torres, Carlos Eugenio; Pryds, Nini; Kuhn, Luise Theil

2010-01-01

Polycrystalline samples of (La1-xAx)0.67Ba0.33Mn1.05O3-δ, with A being a mixture of lanthanides containing 66% La, 22% Nd, 8% Pr and 4% Ce, were prepared by the glycine-nitrate method, with target compositions of x = 0, 0.33, 0.67 and 1. The effect of the mixture of lanthanides on the Curie...... temperature, TC, and the magnetocaloric properties was investigated. The prepared samples are single phase, with space group R-3c. The lattice parameters and average A-site ionic radius, rA decrease linearly with x while the size disorder, as characterized by the variance, σ2, increases from 0.014 to 0...

Analysis of efficiency of waste reverse logistics for recycling.

Science.gov (United States)

Veiga, Marcelo M

2013-10-01

Brazil is an agricultural country with the highest pesticide consumption in the world. Historically, pesticide packaging has not been disposed of properly. A federal law requires the chemical industry to provide proper waste management for pesticide-related products. A reverse logistics program was implemented, which has been hailed a great success. This program was designed to target large rural communities, where economy of scale can take place. Over the last 10 years, the recovery rate has been very poor in most small rural communities. The objective of this study was to analyze the case of this compulsory reverse logistics program for pesticide packaging under the recent Brazilian Waste Management Policy, which enforces recycling as the main waste management solution. This results of this exploratory research indicate that despite its aggregate success, the reverse logistics program is not efficient for small rural communities. It is not possible to use the same logistic strategy for small and large communities. The results also indicate that recycling might not be the optimal solution, especially in developing countries with unsatisfactory recycling infrastructure and large transportation costs. Postponement and speculation strategies could be applied for improving reverse logistics performance. In most compulsory reverse logistics programs, there is no economical solution. Companies should comply with the law by ranking cost-effective alternatives.

Magnetic and magnetocaloric properties of HoCr0.75Fe0.25O3 compound

Science.gov (United States)

Kotnana, Ganesh; Babu, P. D.; Jammalamadaka, S. Narayana

2018-05-01

We report on the magnetic and magnetocaloric properties of HoCr0.75Fe0.25O3 compound around the Néel temperature (TN), which is due to Cr3+ ordering. Susceptibility (χ) vs. temperature (T) graph of HoCr0.75Fe0.25O3 compound infer two transitions due to the ordering of Cr3+ moments (TN ˜ 155 K) and Ho3+ moments (TNHo ˜ 8 K). Magnetic entropy (-ΔSM) value of 1.14 J kg-1 K-1 around 157.5 K with a magnetic field (H) of 90 kOe is attributed to antiferromagnetic (AFM) ordering of Cr3+ moments. A maximum value of adiabatic temperature (ΔTad) ˜ 0.41 K around TN is obtained and is found to increases with applied magnetic field. Negative slope for H/M vs. M2 graph is evident for HoCr0.75Fe0.25O3 compound below TN, which indicates the first order phase transition. Quantified values of -ΔSM and ΔTad open the way to explore rare earth orthochromites for the MCE properties and refrigeration applications.

Effect of grain boundary phase on the magnetization reversal process of nanocrystalline magnet using large-scale micromagnetic simulation

Directory of Open Access Journals (Sweden)

Hiroshi Tsukahara

2018-05-01

Full Text Available We investigated the effects of grain boundary phases on magnetization reversal in permanent magnets by performing large-scale micromagnetic simulations based on Landau–Lifshitz–Gilbert equation under a periodic boundary. We considered planar grain boundary phases parallel and perpendicular to an easy axis of the permanent magnet and assumed the saturation magnetization and exchange stiffness constant of the grain boundary phase to be 10% and 1%, respectively, for Nd2Fe14B grains. The grain boundary phase parallel to the easy axis effectively inhibits propagation of magnetization reversal. In contrast, the domain wall moves across the grain boundary perpendicular to the easy axis. These properties of the domain wall motion are explained by dipole interaction, which stabilizes the antiparallel magnetic configuration in the direction perpendicular to the magnetization orientation. On the other hand, the magnetization is aligned in the same direction by the dipole interaction parallel to the magnetization orientation. This anisotropy of the effect of the grain boundary phase shows that improvement of the grain boundary phase perpendicular to the easy axis effectively enhances the coercivity of permanent magnets.

Theoretical investigations on magnetocaloric effect in Er{sub 1−y}Tb{sub y}Al{sub 2} series

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, P.O., E-mail: paula.ribeiro@gmail.com [Instituto de Física, Universidade do Estado do Rio de Janeiro – UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil); Alho, B.P.; Alvarenga, T.S.T.; Nóbrega, E.P.; Sousa, V.S.R. de [Instituto de Física, Universidade do Estado do Rio de Janeiro – UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil); Carvalho, A. Magnus G. [Laboratório Nacional de Luz Síncrotron, CNPEM, 13083-970 Campinas, SP (Brazil); Caldas, A. [Sociedade Unificada de Ensino Superior e Cultura, SUESC, 20211-351 Rio de Janeiro, RJ (Brazil); Oliveira, N.A. de; Ranke, P.J. von [Instituto de Física, Universidade do Estado do Rio de Janeiro – UERJ, Rua São Francisco Xavier, 524, 20550-013 RJ (Brazil)

2015-04-01

We report on the magnetic and magnetocaloric effect calculations in rare earth Er{sub 1−y}Tb{sub y}Al{sub 2} compounds (y=0.00, 0.25, 0.5, 0.75 and 1.00). Our model Hamiltonian has contributions of the crystalline electrical field anisotropy in both Er and Tb magnetic sublattices, disorder in exchange interactions among Er–Er, Tb–Tb and Er–Tb magnetic ions and the Zeeman effect. The magnetization, the isothermal entropy change (ΔS{sub T}) and the adiabatic temperature change (ΔT{sub ad}) dependence on temperature were simulated and, compared with the experimental data available. - Highlights: • Modeling Er{sub (1−y)}Tb{sub y}Al{sub 2} intermetallic compounds. • Magnetic entropy changes in Er{sub (1−y)}Tb{sub y}Al{sub 2}. • Adiabatic temperature changes in Er{sub 0.75}Tb{sub 0.25}Al{sub 2} and Er{sub 0.65}Tb{sub 0.35}Al{sub 2} compounds.

Research for magnetocaloric effect of Gd{sub 1-x}Dy{sub x} alloy

Energy Technology Data Exchange (ETDEWEB)

Hou, Xueling; Shitao, Li; An, Zhang; Hui, Xu; Ni, Jiansen; Zhou, Bangxin [Institute of Materials, Shanghai University, Shanghai 20007 (China)

2007-12-15

The magnetocaloric effect (MEC) in Gd{sub 1-x}Dy{sub x} (x=0.13,0.20,0.27,0.34,0.40) alloys is investigated using commercial elements with purity of up to 99.80% for Gd and Dy. These alloys are prepared by arc melting in stoichiometric proportions on a water-cooled copper crucible under high pure argon atmosphere. As a result, when x was changed from 0 to 40at%, the adiabatic temperature change ({delta}T) increases from 1.6 K to 3.1 K, the Curie temperature decreased from 288 K to 245.5 K. Gd{sub 73}Dy{sub 27} exhibits the largest {delta}T{sub max} value of 3.1 K at the T{sub C} value of 260 K among the alloys investigated up to 1.2 T (tesla) applied field, it is almost same as the {delta}T of high pure unitary Gd (99.99%) and is clearly superior to commercial unitary Gd (99.80%). The T{sub C} of Gd{sub 73}Dy{sub 27} alloy is minor to high pure unitary Gd (99.99%) and commercially unitary Gd (99.80%). But this alloy prepared by commercial elements with low cost has better MEC to be a promising candidate for magnetic working substances for room temperature magnetic refrigeration. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Magnetic structure of the magnetocaloric compound AlFe{sub 2}B{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Cedervall, Johan, E-mail: johan.cedervall@kemi.uu.se [Department of Chemistry – Ångström Laboratory, Uppsala University, Box 538, 751 21 Uppsala (Sweden); Andersson, Mikael Svante; Sarkar, Tapati [Department of Engineering Sciences, Uppsala University, Box 534, 751 21 Uppsala (Sweden); Delczeg-Czirjak, Erna K. [Department of Physics and Astronomy, Uppsala University, Box 516, 751 20 Uppsala (Sweden); Bergqvist, Lars [Department of Materials and Nano Physics and Swedish e-Science Research Centre (SeRC), Royal Institute of Technology (KTH), Electrum 229, SE-164 40 Kista (Sweden); Hansen, Thomas C. [Institut Laue-Langevin, B.P. 156, Grenoble Cedex 9, 38042 France (France); Beran, Premysl [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, Rez, 25068 Czech Republic (Czech Republic); Nordblad, Per [Department of Engineering Sciences, Uppsala University, Box 534, 751 21 Uppsala (Sweden); Sahlberg, Martin [Department of Chemistry – Ångström Laboratory, Uppsala University, Box 538, 751 21 Uppsala (Sweden)

2016-04-15

The crystal and magnetic structures of AlFe{sub 2}B{sub 2} have been studied with a combination of X-ray and neutron diffraction and electronic structure calculations. The magnetic and magnetocaloric properties have been investigated by magnetisation measurements. The samples have been produced using high temperature synthesis and subsequent heat treatments. The compound crystallises in the orthorhombic crystal system Cmmm and it orders ferromagnetically at 285 K through a second order phase transition. At temperatures below the magnetic transition the magnetic moments align along the crystallographic a-axis. The magnetic entropy change from 0 to 800 kA/m was found to be −1.3 J/K kg at the magnetic transition temperature. - Graphical abstract: The magnetic structure of AlFe{sub 2}B{sub 2} has been investigated using neutron diffraction and the magnetic spins have been found to align ferromagnetically along the crystallographic a-axis. - Highlights: • The crystal and magnetic structures of AlFe{sub 2}B{sub 2} have been studied. • Orders ferromagnetically at 285 K via a second order phase transition. • The magnetic moments are found to be aligned along the crystallographic a-axis. • The magnetic entropy change from 0 to 800 kA/m was found to be −1.3 J/K kg.

Magnetic islands at the field reversal surface in reversed field pinches

International Nuclear Information System (INIS)

Pinsker, R.I.; Reiman, A.H.

1985-09-01

In the reversed field pinch (RFP), magnetic field perturbations having zero poloidal mode number and any toroidal mode number are resonant at the field reversal surface. Such perturbations are a particular threat to the RFP because of their weak radial dependence at low toroidal mode number, and because the toroidal field ripple is essentially of this type. The widths of the resulting islands are calculated in this paper. The self-consistent plasma response is included through the assumption that the plasma relaxes to a Taylor force-free state. The connection with linear tearing mode theory is established for those limits where arbitrarily large islands result from infinitesimal perturbations. Toroidal effects are considered, and application of the theory to RFP experiments is discussed

Tunable magnetocaloric effect in Sr{sub 1-x}Ca{sub x}Mn{sub 0.5}Ti{sub 0.5}O{sub 3} perovskites

Energy Technology Data Exchange (ETDEWEB)

Shanmugapriya, K.; Palanivel, Balan [Pondicherry Engineering College, Department of Physics, Puducherry (India); Radheep, D.M.; Murugan, Ramaswamy [Pondicherry University, Department of Physics, Puducherry (India)

2017-07-15

Sr{sub 1-x}Ca{sub x}Mn{sub 0.5}Ti{sub 0.5}O{sub 3} (x = 0.25, 0.5 and 0.75) polycrystalline samples were synthesized by conventional solid-state reaction. Magnetic characterizations of Sr{sub 1-x}Ca{sub x}Mn{sub 0.5}Ti{sub 0.5}O{sub 3} revealed signature of antiferromagnetic ordering at temperatures (T{sub N}) ∝ 19, 25 and 29.5 K for x = 0.25, x = 0.5 and for x = 0.75, respectively. Sr{sub 1-x}Ca{sub x}Mn{sub 0.5}Ti{sub 0.5}O{sub 3} (x = 0.75) exhibits field-induced antiferromagnetic to ferromagnetic transition at ∝ 30 K with applied magnetic field of 4 and 5 T. Magnetocaloric change (ΔS{sub M}) increases from 3.5 to 19 J/kg K by increasing calcium concentration in the A-site. Those ΔS{sub M} values are relatively very high in these classes of antiferromagnetic perovskite systems and equal to the magnetisation values of the ferromagnetic perovskite manganites. This is the first report for the Sr{sub 1-x}Ca{sub x}Mn{sub 0.5}Ti{sub 0.5}O{sub 3} (x = 0.75) having large magnetic entropy changes induced by the low magnetic field. (orig.)

Electrical and morphological properties of magnetocaloric nano ZnNi ferrite

Energy Technology Data Exchange (ETDEWEB)

Hemeda, O.M., E-mail: omhemeda@yahoo.co.uk [Physics Department, Faculty of Science, Tanta University, Tanta (Egypt); Mostafa, Nasser Y. [Materials and Corrosion Group, Department of Chemistry, Faculty of Science, Taif University (Saudi Arabia); Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt); Abd Elkader, Omar H. [Electron Microscope & Thin Films Department, Physics Division, National Research Center, Dokki 12622, Cairo (Egypt); Electron Microscope Unit, Zoology Department, College of Science, King Saud University, Riyadh (Saudi Arabia); Hemeda, D.M.; Tawfik, A.; Mostafa, M. [Physics Department, Faculty of Science, Tanta University, Tanta (Egypt)

2015-11-15

A series of Zn{sub 1–x}Ni{sub x}Fe{sub 2}O{sub 4} nano ferrite (with x=0, 0.2, 0.4, 0.6, 0.8, and 1) compositions were synthesized using the combustion technique. The powder samples were characterized by XRD. The X-ray analysis showed that the samples were single phase spinel cubic structure. The AC resistivity decreases by increasing the frequency from 1 kHz to 10 kHz. As the frequency of the applied field increases the hopping of charge carrier also increase, thereby decreasing the resistivity. A shift in dielectric maximum is observed toward higher temperature with increasing the Ni content from 536 K to 560 K at 1 kHz. The HRTEM (high resolution TEM) images of four compositions have lattice spacing which confirms the crystalline nature of the samples. The surface morphology SEM of the sample consists of some grains with relatively homogenies distribution with an average size varying from 0.85 to 0.92 μm. The values for entropy change in this work are still small but are significally higher than the values that have been reported for iron oxide nanoparticle. The magnetic entropy change was calculated from measurements of M (H, T) where H is the magnetic field and T is the temperature. The maximum value of entropy change (∆S) obtained near Curie temperature which makes these material candidates for magnetocaloric applications. - Highlights: • Nanoparticles of Ni–Zn ferrite were prepared by solution combustion method. • A shift in dielectric maximum is observed toward high temperature with increasing the Ni content. • The inter planner distance obtained from HRTEM coincide with the f XRD results. • The entropy change vs. temperature shows a broad maximum near Curie temperature. • This results are useful for the operation of cooling devices.

Dynamical similarity of geomagnetic field reversals.

Science.gov (United States)

Valet, Jean-Pierre; Fournier, Alexandre; Courtillot, Vincent; Herrero-Bervera, Emilio

2012-10-04

No consensus has been reached so far on the properties of the geomagnetic field during reversals or on the main features that might reveal its dynamics. A main characteristic of the reversing field is a large decrease in the axial dipole and the dominant role of non-dipole components. Other features strongly depend on whether they are derived from sedimentary or volcanic records. Only thermal remanent magnetization of lava flows can capture faithful records of a rapidly varying non-dipole field, but, because of episodic volcanic activity, sequences of overlying flows yield incomplete records. Here we show that the ten most detailed volcanic records of reversals can be matched in a very satisfactory way, under the assumption of a common duration, revealing common dynamical characteristics. We infer that the reversal process has remained unchanged, with the same time constants and durations, at least since 180 million years ago. We propose that the reversing field is characterized by three successive phases: a precursory event, a 180° polarity switch and a rebound. The first and third phases reflect the emergence of the non-dipole field with large-amplitude secular variation. They are rarely both recorded at the same site owing to the rapidly changing field geometry and last for less than 2,500 years. The actual transit between the two polarities does not last longer than 1,000 years and might therefore result from mechanisms other than those governing normal secular variation. Such changes are too brief to be accurately recorded by most sediments.

Soluble Supercapacitors: Large and Reversible Charge Storage in Colloidal Iron-Doped ZnO Nanocrystals.

Science.gov (United States)

Brozek, Carl K; Zhou, Dongming; Liu, Hongbin; Li, Xiaosong; Kittilstved, Kevin R; Gamelin, Daniel R

2018-05-09

Colloidal ZnO semiconductor nanocrystals have previously been shown to accumulate multiple delocalized conduction-band electrons under chemical, electrochemical, or photochemical reducing conditions, leading to emergent semimetallic characteristics such as quantum plasmon resonances and raising prospects for application in multielectron redox transformations. Here, we demonstrate a dramatic enhancement in the capacitance of colloidal ZnO nanocrystals through aliovalent Fe 3+ -doping. Very high areal and volumetric capacitances (33 μF cm -2 , 233 F cm -3 ) are achieved in Zn 0.99 Fe 0.01 O nanocrystals that rival those of the best supercapacitors used in commercial energy-storage devices. The redox properties of these nanocrystals are probed by potentiometric titration and optical spectroscopy. These data indicate an equilibrium between electron localization by Fe 3+ dopants and electron delocalization within the ZnO conduction band, allowing facile reversible charge storage and removal. As "soluble supercapacitors", colloidal iron-doped ZnO nanocrystals constitute a promising class of solution-processable electronic materials with large charge-storage capacity attractive for future energy-storage applications.

Large magnetocaloric effect of NdGa compound due to successive magnetic transitions

Science.gov (United States)

Zheng, X. Q.; Xu, J. W.; Shao, S. H.; Zhang, H.; Zhang, J. Y.; Wang, S. G.; Xu, Z. Y.; Wang, L. C.; Chen, J.; Shen, B. G.

2018-05-01

The magnetic behavior and MCE property of NdGa compound were studied in detail. According to the temperature dependence of magnetization (M-T) curve at 0.01 T, two sharp changes were observed at 20 K (TSR) and 42 K (TC), respectively, corresponding to spin reorientation and FM-PM transition. Isothermal magnetization curves up to 5 T at different temperatures were measured and magnetic entropy change (ΔSM) was calculated based on M-H data. Temperature dependences of -ΔSM for a field change of 0-2 T and 0-5 T show that there are two peaks on the curves corresponding to TSR and TC, respectively. The value of the two peaks is 6.4 J/kg K and 15.5 J/kg K for the field change of 0-5 T. Since the two peaks are close, the value of -ΔSM in the temperature range between TSR and TC keeps a large value. The excellent MCE performance of NdGa compound benefits from the existence of two successive magnetic transitions.

Magnetostructural transformation and magnetocaloric effect in Mn48‑x V x Ni42Sn10 ferromagnetic shape memory alloys

Science.gov (United States)

Hassan, Najam ul; Shah, Ishfaq Ahmad; Khan, Tahira; Liu, Jun; Gong, Yuanyuan; Miao, Xuefei; Xu, Feng

2018-03-01

In this work, we tuned the magnetostructural transformation and the coupled magnetocaloric properties of Mn48‑x V x Ni42Sn10 (x = 0, 1, 2, and 3) ferromagnetic shape memory alloys prepared by means of partial replacement of Mn by V. It is observed that the martensitic transformation temperatures decrease with the increase of V content. The shift of the transition temperatures to lower temperatures driven by the applied field, the metamagnetic behavior, and the thermal hysteresis indicates the first-order nature for the magnetostructural transformation. The entropy changes with a magnetic field variation of 0–5 T are 15.2, 18.8, and 24.3 {{J}}\\cdot {kg}}-1\\cdot {{{K}}}-1 for the x = 0, 1, and 2 samples, respectively. The tunable martensitic transformation temperature, enhanced field driving capacity, and large entropy change suggest that Mn48‑x V x Ni42Sn10 alloys have a potential for applications in magnetic cooling refrigeration. Project supported by the National Natural Science Foundation of China (Grant Nos. 51601092, 51571121, and 11604148), the Fundamental Research Funds for the Central Universities, China (Grant Nos. 30916011344 and 30916011345), the Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Province, China, the Postdoctoral Science Foundation Funded Project (Grant No. 2016M591851), the Natural Science Foundation of Jiangsu Province, China (Grant Nos. BK20160833, 20160829, and 20140035), the Qing Lan Project of Jiangsu Province, the Priority Academic Program Development of Jiangsu Higher Education Institutions, and Shanxi Scholarship Council of China (Grant No. 2016-092).

Magnetocaloric effect in multiferroic Y-type hexaferrite Ba0.5Sr1.5Zn2(Fe0.92Al0.0812O22

Directory of Open Access Journals (Sweden)

Wenfei Xu

2014-06-01

Full Text Available Magnetocaloric effect is investigated in multiferroic Ba0.5Sr1.5Zn2(Fe0.92Al0.0812O22 ceramic with Y-type hexagonal system. Three magnetic transitions, from alternating longitudinal conical to mixed conical at ∼240 K, to ferrimagnetic at ∼297 K, further to paramagnetic at ∼702 K, are unambiguously determined. Furthermore, obvious MCE is shown, and the maximum values of the magnetic entropy change and relative cooling power are evaluated to be 1.53 JKg−1K−1 and 280 JKg−1 for a field change of 7 T, respectively. In addition, inverse MCE is also observed, which might be associated with the first-order magnetic phase transition between two incommensurate longitudinal conical phases.

Magnetic and magnetocaloric properties of La{sub 1.4-x}Yb{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7}

Energy Technology Data Exchange (ETDEWEB)

Himcinschi, C. [Babes-Bolyai Univ., Cluj-Napoca (Romania). Faculty of Physics; GSI, Strasbourg (France). Inst. de Physique et Chemie des Materiaux; Burzo, E. [Babes-Bolyai Univ., Cluj-Napoca (Romania). Faculty of Physics; Deville, J.P. [GSI, Strasbourg (France). Inst. de Physique et Chemie des Materiaux

2001-07-01

Magnetic and magnetocaloric properties of La{sub 1.4-x}Yb{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7} system were studied. Polycrystalline samples with x = 0 and 0.2 were prepared by solid state reaction. Magnetic measurements show that Curie temperatures decrease from 246 K for x = 0 down to 211 K for x = 0.2. The temperature dependences of the magnetic entropy change {delta}S{sub M}, show peaks close to the magnetic transition temperatures. Peak values of {delta}S{sub M} = 2.7 J/kg K and 2.1 J/kg K were obtained for compositions x = 0 and 0.2. The decrease in {delta}S{sub M} when changing composition was correlated with the diminution of exchange interactions. (orig.)

Glass formation ability, structure and magnetocaloric effect of a heavy rare-earth bulk metallic glassy Gd{sub 55}Co{sub 20}Fe{sub 5}Al{sub 20} alloy

Energy Technology Data Exchange (ETDEWEB)

Jo, C.-L. [Shanghai University, School of Materials Science and Engineering, Yanchang Road 149, Zhabei District, 200072 Shanghai (China)], E-mail: jochollong@163.com; Xia Lei; Ding Ding; Dong Yuanda; Gracien, Ekoko [Shanghai University, School of Materials Science and Engineering, Yanchang Road 149, Zhabei District, 200072 Shanghai (China)

2008-06-30

The glass formation ability, the structure and the magnetocaloric effect of the bulk metallic glassy Gd{sub 55}Co{sub 20}Fe{sub 5}Al{sub 20} alloy were investigated. Bulk metallic glassy (BMGs) alloys were prepared by a copper-mold casting method. The glass forming ability and their structure were studied by using X-ray diffraction (XRD) and differential scanning calorimeter (DSC). The XRD analysis revealed that the as-cast cylinder of Gd{sub 55}Co{sub 20}Fe{sub 5}Al{sub 20} alloy showed fully amorphous structure in 2 mm diameter. The DSC revealed that the bulk cylinder of the Gd{sub 55}Co{sub 20}Fe{sub 5}Al{sub 20} alloy showed a distinct glass transition temperature and a relatively wide supercooled liquid region before crystallization. SQUID investigated the magnetic properties and the entropy changes. The Curie temperature of Gd{sub 55}Co{sub 20}Fe{sub 5}Al{sub 20} BMGs alloy was about 130 K, but the maximum magnetic entropy changes(-{delta}S{sub M}) showed at about 125 K, a little lower than the Curie temperature 130 K. The reason could probably be due to the presence of a little amount of nanocrystalline particles between amorphous phases. The BMG alloy has the characteristic of second-order transition (SOT) on Arrott plots. The results showed that the amorphous sample had a relatively improved magnetocaloric effect, indicating that the amorphous alloy could be considered as a candidate for magnetic refrigeration applications in the temperature interval range of 100-200 K.

Magnetocaloric effect and corrosion resistance of La(Fe, Si)13 composite plates bonded by different fraction of phenolic resin

Science.gov (United States)

Zhang, K. S.; Xue, J. N.; Wang, Y. X.; Sun, H.; Long, Y.

2018-04-01

La(Fe, Si)13-based composite plates were successfully fabricated using different amount of phenolic resin. The introduction of phenolic resin as binder increased the corrosion resistance and maintained giant magnetocaloric effect for La(Fe, Si)13-based composite plates. It was found that corroded spots were firstly observed on the boundaries between resin and La(Fe, Si)13 particles, rather than in La(Fe, Si)13-based particles, after being immersed in static distilled water. The corrosion rate decreased significantly with the increase of resin content. And the increase of the content of phenolic resin leads to the reduction of corrosion current density. Meanwhile, the volumetric magnetic entropy change ΔSM decreases slightly as the content of phenolic resin increases. The ΔSM of the plates with 3 wt.%, 5 wt.% and 8 wt.% resin are 63.1, 61.2 and 59.8 mJ/cm3 K under a low magnetic field change of 1 T, respectively.

Room temperature inverse magnetocaloric effect in Pd substituted Ni{sub 50}Mn{sub 37}Sn{sub 13} Heusler alloys

Energy Technology Data Exchange (ETDEWEB)

Saha, Ritwik, E-mail: ritwik.saha@tifr.res.in; Nigam, A.K.

2014-09-01

The structural, magnetic and magnetocaloric effects for Ni{sub 50−x}Pd{sub x}Mn{sub 37}Sn{sub 13} Heusler alloys have been investigated around both structural and magnetic transitions. The room temperature X-ray diffraction indicates 10 M modulated martensitic structure with an orthorhombic unit cell for x=0 and 1. However, the superstructure reflections for x=2 alloy imply that the pattern is related to the L2{sub 1} phase. The maximum entropy change occurring at the martensitic transition is found to be 21 J kg{sup −1} K{sup −1} for Ni{sub 50}Mn{sub 37}Sn{sub 13} alloy around room temperature. Despite the smaller change in entropy around room temperature, 3.8 times larger value of refrigerant capacity (184.6 J/kg) is achieved for 2% substitution of Pd, due to occurrence of magnetic entropy change in a broader temperature region.

Effect of Si/Ge ratio on resistivity and thermopower in Gd{sub 5}Si{sub x}Ge{sub 4-x} magnetocaloric compounds

Energy Technology Data Exchange (ETDEWEB)

Raj Kumar, D.M. [Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500058 (India); Manivel Raja, M., E-mail: mraja@dmrl.drdo.i [Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500058 (India); Prabahar, K.; Chandrasekaran, V. [Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500058 (India); Poddar, Asok; Ranganathan, R. [Saha Institute of Nuclear Physics, Kolkata 700064 (India); Suresh, K.G. [Indian Institute of Technology Bombay, Mumbai 400076 (India)

2011-07-15

The effect of Si/Ge ratio on resistivity and thermopower behavior has been investigated in the magnetocaloric ferromagnetic Gd{sub 5}Si{sub x}Ge{sub 4-x} compounds with x=1.7-2.3. Microstructural studies reveal the presence of Gd{sub 5}(Si,Ge){sub 4}-matrix phase (5:4-type) along with traces of secondary phases (5:5 or 5:3-type). The x=1.7 and 2.0 samples display the presence of a first order structural transition from orthorhombic to monoclinic phase followed by a magnetic transition of the monoclinic phase. The alloys with x=2.2 and 2.3 display only magnetic transitions of the orthorhombic phase. A low temperature feature apparent in the AC susceptibility and resistivity data below 100 K reflects an antiferromagnetic transition of secondary phase(s) present in these compounds. The resistivity behavior study correlates with microstructural studies. A large change in thermopower of -8 {mu}V/K was obtained at the magneto-structural transition for the x=2 compound. - Research highlights: Effect of Si/Ge ratio on microstructure, magneto-structural transitions, resistivity ({rho}) and thermopower S(T) behaviour has been investigated in Gd{sub 5}Si{sub x}Ge{sub 4-x} compounds with x=1.7, 2.0, 2.2 and 2.3. Microstructural studies reveal the presence of a Gd{sub 5}(Si,Ge){sub 4} -matrix phase (5:4-type) along with traces of secondary phases (5:5 or 5:3-type). The resistivity behaviour has shown good correlation with the microstructural studies. A large change in thermopower of -8{mu}V/K was obtained at the magneto-structural transition for the x=2 compound. The resistivity and change in thermopower values were high for the alloys with Si/Ge ratio {<=}1 compared to that of the alloys with Si/Ge ratio >1.

Reversible airfoils for stopped rotors in high speed flight

International Nuclear Information System (INIS)

Niemiec, Robert; Jacobellis, George; Gandhi, Farhan

2014-01-01

This study starts with the design of a reversible airfoil rib for stopped-rotor applications, where the sharp trailing-edge morphs into the rounded leading-edge, and vice-versa. A NACA0012 airfoil is approximated in a piecewise linear manner and straight, rigid outer profile links used to define the airfoil contour. The end points of the profile links connect to control links, each set on a central actuation rod via an offset. Chordwise motion of the actuation rod moves the control and the profile links and reverses the airfoil. The paper describes the design methodology and evolution of the final design, based on which two reversible airfoil ribs were fabricated and used to assemble a finite span reversible rotor/wing demonstrator. The profile links were connected by Aluminum strips running in the spanwise direction which provided stiffness as well as support for a pre-tensioned elastomeric skin. An inter-rib connector with a curved-front nose piece supports the leading-edge. The model functioned well and was able to reverse smoothly back-and-forth, on application and reversal of a voltage to the motor. Navier–Stokes CFD simulations (using the TURNS code) show that the drag coefficient of the reversible airfoil (which had a 13% maximum thickness due to the thickness of the profile links) was comparable to that of the NACA0013 airfoil. The drag of a 16% thick elliptical airfoil was, on average, about twice as large, while that of a NACA0012 in reverse flow was 4–5 times as large, even prior to stall. The maximum lift coefficient of the reversible airfoil was lower than the elliptical airfoil, but higher than the NACA0012 in reverse flow operation. (paper)

Reverse flow through a large scale multichannel nozzle

International Nuclear Information System (INIS)

Duignan, M.R.; Nash, C.A.

1992-01-01

A database was developed for the flow of water through a scaled nozzle of a Savannah River Site reactor inlet plenum. The water flow in the nozzle was such that it ranged from stratified to water solid conditions. Data on the entry of air into the nozzle and plenum as a function of water flow are of interest in loss-of-coolant studies. The scaled nozzle was 44 cm long, had an entrance diameter of 95 mm, an exit opening of 58 mm x 356 mm, and an exit hydraulic diameter approximately equal to that of the inlet. Within the nozzle were three flow-straightening vanes which divided the flow path into four channels. All data were taken at steady-state and isothermal (300 K ± 1.5 K) conditions. During the reverse flow of water through the nozzle the point at which air begins to enter was predicted within 90% by a critical weir-flow calculation. The point of air entry into the plenum itself was found to be a function of flow conditions

Tandem mirror and field-reversed mirror experiments

Energy Technology Data Exchange (ETDEWEB)

Coensgen, F.H.; Simonen, T.C.; Turner, W.C.

1979-08-21

This paper is largely devoted to tandem mirror and field-reversed mirror experiments at the Lawrence Livermore Laboratory (LLL), and briefly summarizes results of experiments in which field-reversal has been achieved. In the tandem experiment, high-energy, high-density plasmas (nearly identical to 2XIIB plasmas) are located at each end of a solenoid where plasma ions are electrostatically confined by the high positive poentials arising in the end plug plasma. End plug ions are magnetically confined, and electrons are electrostatically confined by the overall positive potential of the system. The field-reversed mirror reactor consists of several small field-reversed mirror plasmas linked together for economic reasons. In the LLL Beta II experiment, generation of a field-reversed plasma ring will be investigated using a high-energy plasma gun with a transverse radial magnetic field. This plasma will be further heated and sustained by injection of intense, high-energy neutral beams.

Structural, transport, magnetic, magnetocaloric properties and critical analysis of Ni-Co-Mn-Ga Heusler alloys

Science.gov (United States)

Arumugam, S.; Devarajan, U.; Esakki Muthu, S.; Singh, Sanjay; Thiyagarajan, R.; Raja, M. Manivel; Rama Rao, N. V.; Banerjee, Alok

2017-11-01

In this work, we have investigated structural, transport, magnetic, magnetocaloric (MC) properties and critical exponents analysis of the (Ni2.1-xCox)Mn0.9 Ga (x = 0, 0.04, 0.12 and 0.2) Heusler alloys. For all compositions, cubic austenite (A) phase with metallic character is observed at room temperature (RT). With increasing of Co content, magnitude of resistivity decreases, whereas residual resistivity (ρ0) and electron scattering factor (A) increases linearly. Magnetic measurements exhibit that ferromagnetic (FM) Curie temperature (TCA) increases towards RT by increasing Co concentration. All samples show conventional MC and maximum magnetic entropy change (ΔSMpeak) of -2.8 Jkg-1 K-1 is observed for x = 0.12 at 147 K under 5 T. Further, hysteresis is observed between cooling and warming cycles around FM-PM (TCA) transition in x = 0, 0.04 samples, which suggests that first order nature of transition. However, there is no hysteresis across TCA for x = 0.12 and 0.2 samples suggesting second-order nature of the transition. The critical exponents are calculated for x = 0.12 sample around TCA using Arrott plot and Kouvel-Fisher method, the estimated critical exponents are found closer to the mean-field model reveals the long range ferromagnetic ordering in this composition.

Indirect measurement of the magnetocaloric effect using a novel differential scanning calorimeter with magnetic field.

Science.gov (United States)

Jeppesen, S; Linderoth, S; Pryds, N; Kuhn, L Theil; Jensen, J Buch

2008-08-01

A simple and high-sensitivity differential scanning calorimeter (DSC) unit operating under magnetic field has been built for indirect determination of the magnetocaloric effect. The principle of the measuring unit in the calorimeter is based on Peltier elements as heat flow sensors. The high sensitivity of the apparatus combined with a suitable calibration procedure allows very fast and accurate heat capacity measurements under magnetic field to be made. The device was validated from heat capacity measurements for the typical DSC reference material gallium (Ga) and a La(0.67)Ca(0.33)MnO(3) manganite system and the results were highly consistent with previous reported data for these materials. The DSC has a working range from 200 to 340 K and has been tested in magnetic fields reaching 1.8 T. The signal-to-noise ratio is in the range of 10(2)-10(3) for the described experiments. Finally the results have been compared to results from a Quantum Design(R) physical properties measuring system. The configuration of the system also has the advantage of being able to operate with other types of magnets, e.g., permanent magnets or superconducting coils, as well as the ability to be expanded to a wider temperature range.

Reversible flowchart languages and the structured reversible program theorem

DEFF Research Database (Denmark)

Yokoyama, Tetsuo; Axelsen, Holger Bock; Glück, Robert

2008-01-01

Many irreversible computation models have reversible counterparts, but these are poorly understood at present. We introduce reversible flowcharts with an assertion operator and show that any reversible flowchart can be simulated by a structured reversible flowchart using only three control flow...... operators. Reversible flowcharts are r- Turing-complete, meaning that they can simuluate reversible Turing machines without garbage data. We also demonstrate the injectivization of classical flowcharts into reversible flowcharts. The reversible flowchart computation model provides a theoretical...

Reversibility of cardiopulmonary impairment after laparoscopic repair of large hiatal hernia

Directory of Open Access Journals (Sweden)

Emanuele Asti

2015-01-01

Full Text Available Giant hiatus hernia with or without intrathoracic gastric volvulus often presents with symptoms suggestive of both cardiac and pulmonary compression. Cardiopulmonary impairment may be reversible in these patients by laparoscopic crural repair and fundoplication as shown in this case report. Cardiac magnetic resonance and the cardiopulmonary exercise test may help selecting patients for surgery. These preliminary findings led us to start a prospective study using this multimodality diagnostic approach.

Magnetocaloric properties of LaFe13-x-yCoxSiy and commercial grade Gd

International Nuclear Information System (INIS)

Bjork, R.; Bahl, C.R.H.; Katter, M.

2010-01-01

The magnetocaloric properties of three samples of LaFe 13-x-y Co x Si y have been measured and compared to measurements of commercial grade Gd. The samples have (x=0.86, y=1.08), (x=0.94, y=1.01) and (x=0.97, y=1.07) yielding Curie temperatures in the range 276-288 K. The magnetization, specific heat capacity and adiabatic temperature change have been measured over a broad temperature interval. Importantly, all measurements were corrected for demagnetization, allowing the data to be directly compared. In an internal field of 1 T the maximum specific entropy changes were 6.2, 5.1 and 5.0 J/kg K, the specific heat capacities were 910, 840 and 835 J/kg K and the adiabatic temperature changes were 2.3, 2.1 and 2.1 K for the three LaFeCoSi samples respectively. For Gd in an internal field of 1 T the maximum specific entropy change was 3.1 J/kg K, the specific heat capacity was 340 J/kg K and the adiabatic temperature change was 3.3 K. The adiabatic temperature change was also calculated from the measured values of the specific heat capacity and specific magnetization and compared to the directly measured values. In general an excellent agreement was seen.

Dynamic evolution and biogenesis of small RNAs during sex reversal

OpenAIRE

Liu, Jie; Luo, Majing; Sheng, Yue; Hong, Qiang; Cheng, Hanhua; Zhou, Rongjia

2015-01-01

Understanding origin, evolution and functions of small RNA (sRNA) genes has been a great challenge in the past decade. Molecular mechanisms underlying sexual reversal in vertebrates, particularly sRNAs involved in this process, are largely unknown. By deep-sequencing of small RNA transcriptomes in combination with genomic analysis, we identified a large amount of piRNAs and miRNAs including over 1,000 novel miRNAs, which were differentially expressed during gonad reversal from ovary to testis...

Magnetocaloric effect and transport properties of Gd5Ge2(Si1-x Sn x )2 (x=0.23 and 0.40) compounds

International Nuclear Information System (INIS)

Campoy, J.C.P.; Plaza, E.J.R.; Nascimento, F.C.; Coelho, A.A.; Pereira, M.C.; Fabris, J.D.; Raposo, M.T.; Cardoso, L.P.; Persiano, A.I.C.; Gama, S.

2007-01-01

We report a study about the structural properties of polycrystalline samples of nominal composition Gd 5 Ge 2 (Si 1- x Sn x ) 2 (x=0.23, 0.40) that closely influence their physical behavior particularly related to electric resistivity and magnetocaloric (MCE) effect. The samples were characterized by X-ray diffraction (XRD) using the Rietveld refinement method, metallographic analyses, 119 Sn Moessbauer spectroscopy, DC magnetization and electrical transport measurements. It was identified a Gd 5 Si 2 Ge 2 -monoclinic phase for x=0.23 and a Sm 5 Sn 4 -orthorhombic phase (type II) for x=0.40, both with two non-equivalent crystallographic sites for the Sn ions. We were able to infer on the role of tin on the magnetic and transport properties in these compounds

Reverse Algols

Science.gov (United States)

Leung, K. C.

1989-01-01

Reverse Algols, binary systems with a semidetached configuration in which the more massive component is in contact with the critical equipotential surface, are examined. Observational evidence for reverse Algols is presented and the parameters of seven reverse Algols are listed. The evolution of Algols and reverse Algols is discussed. It is suggested that, because reverse Algols represent the premass-reversal semidetached phase of close binary evolution, the evolutionary time scale between regular and reverse Algols is the ratio of the number of confirmed systems of these two Algol types.

Studies of a poloidal divertor reversed field pinch

International Nuclear Information System (INIS)

Sarff, J.S.; Almagri, A.F.; Assadi, S.; Den Hartog, D.J.; Dexter, R.N.; Prager, S.C.; Sprott, J.C.

1988-07-01

An attempt has been made to form a reversed field pinch (RFP) in a poloidal divertor configuration which position the plasma far from a conducting wall. In this configuration, the plasma is localized within a magnetic separatrix formed by the combination of toroidal currents in the plasma and four internal aluminum rings. Plasmas were formed with plasma current /approximately/135 kA, toroidal field reversal lasting /approximately/1 msec, line-averaged density /approximately/1--2 /times/ 10 13 cm/sup /minus/3/ and central electron temperature /approximately/55 eV, but a large asymmetry in the magnetic field (δB/B /approximately/40%) onset at about the time the toroidal field reversed at the wall. Symmetric, poloidal divertor RFP equilibria were not formed. This behavior might be expected based on linear MHD stability analysis of a cylindrical plasma bounded by a large vacuum region and distant conducting wall. The symmetric equilibrium before the asymmetry develops and the asymmetry itself are described. 15 refs., 3 figs

Thermal hysteretic behaviour of La0.67Ca0.33MuO3

DEFF Research Database (Denmark)

Neves Bez, Henrique; Nielsen, Kaspar Kirstein; Smith, Anders

2014-01-01

La0.67Ca0.33MnO3 has been reported for the past years as a possible material for magnetocaloric applications. In this circumstance, hysteresis is unappealing due to losses during the thermal cycles. It is usually related with first-order phase transitions and large magnetocaloric effect....... In this context, we report thermal hysteresis of single phase La0.67Ca0.33MnO3 characterized by heating and cooling procedures of heat capacity in zero field, magnetic susceptibility and magnetic entropy change....

Managing Reverse Logistics or Reversing Logistics Management?

OpenAIRE

Brito, Marisa

2004-01-01

textabstractIn the past, supply chains were busy fine-tuning the logistics from raw material to the end customer. Today an increasing flow of products is going back in the chain. Thus, companies have to manage reverse logistics as well.This thesis contributes to a better understanding of reverse logistics. The thesis brings insights on reverse logistics decision-making and it lays down theoretical principles for reverse logistics as a research field.In particular it puts together a framework ...

Martensitic transition, inverse magnetocaloric effect and shape memory characteristics in Mn{sub 48−x}Cu{sub x}Ni{sub 42}Sn{sub 10} Heusler alloys

Energy Technology Data Exchange (ETDEWEB)

Liu, Changqin [Department of Physics, Shanghai University, Shanghai 200444 (China); Li, Zhe [Reasearch center for magnetic materials and devices & Key Laboratory for Advanced Functional and Low Dimensional Materials of Yunnan Higher Education Institute, Qujing Normal University, Qujing 655011 (China); Zhang, Yuanlei [Department of Physics, Shanghai University, Shanghai 200444 (China); Reasearch center for magnetic materials and devices & Key Laboratory for Advanced Functional and Low Dimensional Materials of Yunnan Higher Education Institute, Qujing Normal University, Qujing 655011 (China); Liu, Yang; Sun, Junkun; Huang, Yinsheng; Kang, Baojuan [Department of Physics, Shanghai University, Shanghai 200444 (China); Xu, Kun [Reasearch center for magnetic materials and devices & Key Laboratory for Advanced Functional and Low Dimensional Materials of Yunnan Higher Education Institute, Qujing Normal University, Qujing 655011 (China); Deng, Dongmei [Department of Physics, Shanghai University, Shanghai 200444 (China); Jing, Chao, E-mail: cjing@staff.shu.edu.cn [Department of Physics, Shanghai University, Shanghai 200444 (China)

2017-03-01

In this paper, we have systematically prepared a serials of polycrystalline Mn{sub 48−x}Cu{sub x}Ni{sub 42}Sn{sub 10} alloys (x=0, 1, 3, 5, 6, 8, 10 and 12) and investigated the influence of the Cu doping on martensitic transition (MT) as well as magnetic properties. Experimental results indicate that the MT temperature and the martensite Curie temperature (T{sub c}{sup M}) shift to high temperature with increasing the substitution of Cu (from Mn rich alloy to Ni rich alloy), while the austenite Curie temperature (T{sub c}{sup A}) is almost unchanged. It was found that the structures undergo L2{sub 1} and 4O with the increasing of Cu concentration near room temperature. Therefore, the magnetostructural transition can be tuned by appropriate Cu doping in these alloys. Moreover, we mainly studied the multiple functional properties for inverse magnetocaloric effect and shape memory characteristics associated with the martensitic transition. A large positive isothermal entropy change of Mn{sub 48}Ni{sub 42}Sn{sub 10} was obtained, and the maximum transition entropy change achieves about 48 J/kg K as x=8. In addition, a considerable temperature-induced spontaneous strain with the value of 0.16% was obtained for Mn{sub 48}Ni{sub 42}Sn{sub 10} alloys.

Coupled magnetostructural transition in Ni-Mn-V-Ga Heusler alloys and its effect on the magnetocaloric and transport properties

International Nuclear Information System (INIS)

Devarajan, U; Kannan, M; Thiyagarajan, R; Arumugam, S; Manivel Raja, M; Rama Rao, N V; Singh, Sanjay; Venkateshwarlu, D; Ganesan, V; Ohashi, M

2016-01-01

In the present work, the magnetocaloric and transport properties of Ni 2.2 Mn 0.72−x V x Ga 1.08 (x  =  0.0, 0.04, 0.08, 0.12) magnetic shape memory alloys are investigated. The alloys show a coupled magnetostructural transition from paramagnetic austenite to ferromagnetic martensite in a composition range of 0  ⩽  x  ⩽  0.08. For higher V substitution (x  =  0.12), the martensite transition is lower than the conventional ferromagnetic transition. Large magnetic entropy change values of about 12.4, 16.2 and 19 J kg −1 K −1 and corresponding refrigeration capacities of 60.6, 82.5, and 103 J kg −1 were observed for x  =  0, 0.04 and 0.08 alloys, respectively. The above two parameters linearly increase with increasing magnetic field. The indirect adiabatic temperature change calculated from the heat capacity measurement is found to be at its maximum for x  =  0.12 at H  =  8 T. The magnetoresistance is observed to increase from 0% (x  =  0.12) to 28% (x  =  0) at the maximum field of 8 T. The Sommerfeld coefficients are almost the same for the parent and a V-doped sample, which reveals a low free electron density, and the Debye coefficients decrease with an increase in V doping, confirming the phenomenon of electron–phonon scattering. The critical exponents at second order magnetic transition for x  = 0.12 are calculated as β  =  0.482, γ  =  1.056, δ  =  3.021, which agrees closely with mean field theory. (paper)

Magnetocaloric effect in gadolinium-oxalate framework Gd2(C2O4)3(H2O)6⋅(0⋅6H2O)

International Nuclear Information System (INIS)

Sibille, Romain; Didelot, Emilie; Mazet, Thomas; Malaman, Bernard; François, Michel

2014-01-01

Magnetic refrigerants incorporating Gd 3+ ions and light organic ligands offer a good balance between isolation of the magnetic centers and their density. We synthesized the framework material Gd 2 (C 2 O 4 ) 3 (H 2 O) 6 ⋅0.6H 2 O by a hydrothermal route and characterized its structure. The honeycomb lattice of Gd 3+ ions interlinked by oxalate ligands in the (a,c) plane ensures their decoupling in terms of magnetic exchange interactions. This is corroborated by magnetic measurements indicating negligible interactions between the Gd 3+ ions in this material. The magnetocaloric effect was evaluated from isothermal magnetization measurements. The maximum entropy change −ΔS M max reaches 75.9 mJ cm −3 K −1 (around 2 K) for a moderate field change (2 T)

Dynamic evolution and biogenesis of small RNAs during sex reversal.

Science.gov (United States)

Liu, Jie; Luo, Majing; Sheng, Yue; Hong, Qiang; Cheng, Hanhua; Zhou, Rongjia

2015-05-06

Understanding origin, evolution and functions of small RNA (sRNA) genes has been a great challenge in the past decade. Molecular mechanisms underlying sexual reversal in vertebrates, particularly sRNAs involved in this process, are largely unknown. By deep-sequencing of small RNA transcriptomes in combination with genomic analysis, we identified a large amount of piRNAs and miRNAs including over 1,000 novel miRNAs, which were differentially expressed during gonad reversal from ovary to testis via ovotesis. Biogenesis and expressions of miRNAs were dynamically changed during the reversal. Notably, phylogenetic analysis revealed dynamic expansions of miRNAs in vertebrates and an evolutionary trajectory of conserved miR-17-92 cluster in the Eukarya. We showed that the miR-17-92 cluster in vertebrates was generated through multiple duplications from ancestor miR-92 in invertebrates Tetranychus urticae and Daphnia pulex from the Chelicerata around 580 Mya. Moreover, we identified the sexual regulator Dmrt1 as a direct target of the members miR-19a and -19b in the cluster. These data suggested dynamic biogenesis and expressions of small RNAs during sex reversal and revealed multiple expansions and evolutionary trajectory of miRNAs from invertebrates to vertebrates, which implicate small RNAs in sexual reversal and provide new insight into evolutionary and molecular mechanisms underlying sexual reversal.

Rotating disk atomization of Gd and Gd-Y for hydrogen liquefaction via magnetocaloric cooling

Energy Technology Data Exchange (ETDEWEB)

Slinger, Tyler [Iowa State Univ., Ames, IA (United States)

2016-12-17

In order to enable liquid hydrogen fuel cell technologies for vehicles the cost of hydrogen liquefaction should be lowered. The current method of hydrogen liquefaction is the Claude cycle that has a figure of merit (FOM) of 0.3-0.35. New magnetocaloric hydrogen liquefaction devices have been proposed with a FOM>0.5, which is a significant improvement. A significant hurdle to realizing these devices is the synthesis of spherical rare earth based alloy powders of 200μm in diameter. In this study a centrifugal atomization method that used a rotating disk with a rotating oil quench bath was developed to make gadolinium and gadolinium-yttrium spheres. The composition of the spherical powders included pure Gd and Gd_0.91Y_0.09. The effect of atomization parameters, such as superheat, melt properties, disk shape, disk speed, and melt system materials and design, were investigated on the size distribution and morphology of the resulting spheres. The carbon, nitrogen, and oxygen impurity levels also were analyzed and compared with the magnetic performance of the alloys. The magnetic properties of the charge material as well as the resulting powders were measured using a vibrating sample magnetometer. The saturation magnetization and Curie temperature were the target properties for the resulting spheres. These values were compared with measurements taken on the charge material in order to investigate the effect of atomization processing on the alloys.

Reverse Logistics

OpenAIRE

Kulikova, Olga

2016-01-01

This thesis was focused on the analysis of the concept of reverse logistics and actual reverse processes which are implemented in mining industry and finding solutions for the optimization of reverse logistics in this sphere. The objective of this paper was the assessment of the development of reverse logistics in mining industry on the example of potash production. The theoretical part was based on reverse logistics and mining waste related literature and provided foundations for further...

Slowly switching between environments facilitates reverse evolution in small populations

Science.gov (United States)

Tan, Longzhi; Gore, Jeff

2011-03-01

The rate at which a physical process occurs usually changes the behavior of a system. In thermodynamics, the reversibility of a process generally increases when it occurs at an infinitely slow rate. In biological evolution, adaptations to a new environment may be reversed by evolution in the ancestral environment. Such fluctuating environments are ubiquitous in nature, although how the rate of switching affects reverse evolution is unknown. Here we use a computational approach to quantify evolutionary reversibility as a function of the rate of switching between two environments. For small population sizes, which travel on landscapes as random walkers, we find that both genotypic and phenotypic reverse evolution increase at slow switching rates. However, slow switching of environments decreases evolutionary reversibility for a greedy walker, corresponding to large populations (extensive clonal interference). We conclude that the impact of the switching rate for biological evolution is more complicated than other common physical processes, and that a quantitative approach may yield significant insight into reverse evolution.

A Reverse Shock in GRB 160509A

Science.gov (United States)

Laskar, Tanmoy; Alexander, Kate D.; Berger, Edo; Fong, Wen-fai; Margutti, Raffaella; Shivvers, Isaac; Williams, Peter K. G.; Kopač, Drejc; Kobayashi, Shiho; Mundell, Carole; Gomboc, Andreja; Zheng, WeiKang; Menten, Karl M.; Graham, Melissa L.; Filippenko, Alexei V.

2016-12-01

We present the second multi-frequency radio detection of a reverse shock in a γ-ray burst. By combining our extensive radio observations of the Fermi-Large Area Telescope γ-ray burst 160509A at z = 1.17 up to 20 days after the burst with Swift X-ray observations and ground-based optical and near-infrared data, we show that the afterglow emission comprises distinct reverse shock and forward shock contributions: the reverse shock emission dominates in the radio band at ≲10 days, while the forward shock emission dominates in the X-ray, optical, and near-infrared bands. Through multi-wavelength modeling, we determine a circumburst density of {n}0≈ {10}-3 {{cm}}-3, supporting our previous suggestion that a low-density circumburst environment is conducive to the production of long-lasting reverse shock radiation in the radio band. We infer the presence of a large excess X-ray absorption column, N H ≈ 1.5 × 1022 {{cm}}-2, and a high rest-frame optical extinction, A V ≈ 3.4 mag. We identify a jet break in the X-ray light curve at {t}{jet}≈ 6 {days}, and thus derive a jet opening angle of {θ }{jet}≈ 4^\\circ , yielding a beaming-corrected kinetic energy and radiated γ-ray energy of {E}{{K}}≈ 4× {10}50 erg and {E}γ ≈ 1.3× {10}51 erg (1-104 keV, rest frame), respectively. Consistency arguments connecting the forward shocks and reverse shocks suggest a deceleration time of {t}{dec} ≈ 460 s ≈ T 90, a Lorentz factor of {{Γ }}({t}{dec})≈ 330, and a reverse-shock-to-forward-shock fractional magnetic energy density ratio of {R}{{B}}\\equiv {ɛ }{{B},{RS}}/{ɛ }{{B},{FS}}≈ 8. Our study highlights the power of rapid-response radio observations in the study of the properties and dynamics of γ-ray burst ejecta.

Reverse survival method of fertility estimation: An evaluation

Directory of Open Access Journals (Sweden)

Thomas Spoorenberg

2014-07-01

Full Text Available Background: For the most part, demographers have relied on the ever-growing body of sample surveys collecting full birth history to derive total fertility estimates in less statistically developed countries. Yet alternative methods of fertility estimation can return very consistent total fertility estimates by using only basic demographic information. Objective: This paper evaluates the consistency and sensitivity of the reverse survival method -- a fertility estimation method based on population data by age and sex collected in one census or a single-round survey. Methods: A simulated population was first projected over 15 years using a set of fertility and mortality age and sex patterns. The projected population was then reverse survived using the Excel template FE_reverse_4.xlsx, provided with Timæus and Moultrie (2012. Reverse survival fertility estimates were then compared for consistency to the total fertility rates used to project the population. The sensitivity was assessed by introducing a series of distortions in the projection of the population and comparing the difference implied in the resulting fertility estimates. Results: The reverse survival method produces total fertility estimates that are very consistent and hardly affected by erroneous assumptions on the age distribution of fertility or by the use of incorrect mortality levels, trends, and age patterns. The quality of the age and sex population data that is 'reverse survived' determines the consistency of the estimates. The contribution of the method for the estimation of past and present trends in total fertility is illustrated through its application to the population data of five countries characterized by distinct fertility levels and data quality issues. Conclusions: Notwithstanding its simplicity, the reverse survival method of fertility estimation has seldom been applied. The method can be applied to a large body of existing and easily available population data

Fuel bundle movement due to reverse flow

Energy Technology Data Exchange (ETDEWEB)

Wahba, N N; Akalin, O [Ontario Hydro, Toronto, ON (Canada)

1996-12-31

When a break occurs in the inlet feeder or inlet header, the rapid depressurization will cause the channel flow to reverse forcing the string of bundles to accelerate and impact with upstream shield plug. A model has been developed to predict the bundle motion due to the channel flow reversal. The model accounts for various forces acting on the bundle. A series of five reverse flow, bundle acceleration experiments have been conducted simulating a break in the inlet feeder of a CANDU fuel channel. The model has been validated against the experiments. The predicted impact velocities are in good agreement with the measured values. It is demonstrated that the model may be successfully used in predicting bundle relocation timing following a large LOCA (loss of coolant). (author). 7 refs., 3 tabs., 11 figs.

Reversible Rigidity Control Using Low Melting Temperature Alloys

Science.gov (United States)

Shan, Wanliang; Lu, Tong; Majidi, Carmel

2013-03-01

Inspired by nature, materials able to achieve rapid rigidity changes have important applications for human body protection in military and many other areas. This talk presents the fabrication and design of soft-matter technologies that exhibit rapid reversible rigidity control. Fabricated with a masked deposition technique, the soft-matter composite contains liquid-phase and phase-changing metal alloys embedded in a soft and highly stretchable elastomer. The composite material can reversibly change its rigidity by three orders of magnitude and sustain large deformation.

About the mechanical stability of MnFe(P,Si,B) giant-magnetocaloric materials

Energy Technology Data Exchange (ETDEWEB)

Guillou, F., E-mail: f.guillou@tudelft.nl [FAME, Faculty of Applied Sciences, TU Delft, Mekelweg 15, 2629 JB Delft (Netherlands); Yibole, H.; Dijk, N.H. van [FAME, Faculty of Applied Sciences, TU Delft, Mekelweg 15, 2629 JB Delft (Netherlands); Zhang, L. [BASF Netherlands B.V., Strijkviertel 67, 3454 PK De Meern (Netherlands); Hardy, V. [CRISMAT, Ensicaen, UMR 6508 CNRS, 6 B" d Maréchal Juin, 14050 Caen Cedex (France); Brück, E. [FAME, Faculty of Applied Sciences, TU Delft, Mekelweg 15, 2629 JB Delft (Netherlands)

2014-12-25

Highlights: • Electrical resistivity and hardness show an evolution at T{sub C} with thermal cycling. • Degradation depends on the (c/a) lattice discontinuity at the transition. • Boron substituted materials present an improved mechanical stability. - Abstract: Due to its ability to control the latent heat and the hysteresis (thermal or magnetic) at the first-order transition (FOT) without deteriorating the saturation magnetisation, boron substitution in MnFe(P,Si) materials has recently been reported to be an ideal parameter to reach promising magnetocaloric performances: ΔS ≈ 10 Jkg{sup −1} K{sup −1} and cyclic ΔT of 2.6 K (and more) at a moderate magnetic field of ΔB = 1 T. Additionally, an interesting aspect for applications is the improvement of the mechanical stability in B doped materials compared to the pristine MnFe(P,Si) compounds. These improved mechanical properties were initially supported by naked-eye inspection and the observation of a constant ΔT during a few thousands of magnetic cycles. (Guillou et al., 2014) Here, the evolution upon cycling of MnFe(P,Si,B) materials is studied in a more quantitative and systematic manner. For that purpose transformation temperatures, electrical resistivity, micro-hardness and the microstructure are tracked as a function of the thermal cycling across the FOT for three prototypical compositions in the MnFe(P,Si,B) system. It turns out this set of data confirms the initial finding that B substitution has a positive effect on the mechanical stability. The origin of this improvement is discussed, in particular in respect to the lattice parameter discontinuities at the phase transition.

Magneto-caloric effect in the pseudo-binary intermetallic YPrFe{sub 17} compound

Energy Technology Data Exchange (ETDEWEB)

Alvarez, Pablo [Departamento de Fisica, Universidad de Oviedo, Calvo Sotelo, s/n, 33007 Oviedo (Spain); Gorria, Pedro, E-mail: pgorria@uniovi.es [Departamento de Fisica, Universidad de Oviedo, Calvo Sotelo, s/n, 33007 Oviedo (Spain); Sanchez Llamazares, Jose L. [Division de Materiales Avanzados, Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San Jose 2055, CP 78216, San Luis Potosi (Mexico); Perez, Maria J. [Departamento de Fisica, Universidad de Oviedo, Calvo Sotelo, s/n, 33007 Oviedo (Spain); Franco, Victorino [Departamento de Fisica de la Materia Condensada, ICMSE-CSIC, Universidad de Sevilla, P.O. Box 1065, 41080 Sevilla (Spain); Reiffers, Marian; Kovac, Jozef [Institute of Experimental Physics, Watsonova 47, SK-04001 Kosice (Slovakia); Puente-Orench, Ines [Institute Laue Langevin, 6 rue Jules Horowitz, 38042 Grenoble (France); Blanco, Jesus A. [Departamento de Fisica, Universidad de Oviedo, Calvo Sotelo, s/n, 33007 Oviedo (Spain)

2011-12-15

Highlights: Black-Right-Pointing-Pointer YPrFe{sub 17} exhibits a broad {Delta}S{sub M}(T) associated with the ferro-to-paramagnetic phase transition (T{sub C} Almost-Equal-To 290 K). Black-Right-Pointing-Pointer We obtain |{Delta}S{sub M}| Almost-Equal-To 2.3 J kg{sup -1} K{sup -1} and RCP Almost-Equal-To 100 J kg{sup -1}for a magnetic field change of 1.5 T. Black-Right-Pointing-Pointer A single master curve for {Delta}S{sub M} is found when compared with other isostructural R{sub 2}Fe{sub 17} binary alloys. - Abstract: We have synthesized the intermetallic YPrFe{sub 17} compound by arc-melting. X-ray and neutron powder diffraction show that the crystal structure is rhombohedral with R3{sup Macron }m space group (Th{sub 2}Zn{sub 17}-type). The investigated compound exhibits a broad isothermal magnetic entropy change {Delta}S{sub M}(T) associated with the ferro-to-paramagnetic phase transition (T{sub C} Almost-Equal-To 290 K). The |{Delta}S{sub M}| ( Almost-Equal-To 2.3 J kg{sup -1} K{sup -1}) and the relative cooling power ( Almost-Equal-To 100 J kg{sup -1}) have been calculated for applied magnetic field changes up to 1.5 T. A single master curve for {Delta}S{sub M} under different values of the magnetic field change can be obtained by a rescaling of the temperature axis. The results are compared and discussed in terms of the magneto-caloric effect in the isostructural R{sub 2}Fe{sub 17} (R = Y, Pr and Nd) binary intermetallic alloys.

A Probabilistic Assessment of the Next Geomagnetic Reversal

Science.gov (United States)

Buffett, Bruce; Davis, William

2018-02-01

Deterministic forecasts for the next geomagnetic reversal are not feasible due to large uncertainties in the present-day state of the Earth's core. A more practical approach relies on probabilistic assessments using paleomagnetic observations to characterize the amplitude of fluctuations in the geomagnetic dipole. We use paleomagnetic observations for the past 2 Myr to construct a stochastic model for the axial dipole field and apply well-established methods to evaluate the probability of the next geomagnetic reversal as a function of time. For a present-day axial dipole moment of 7.6 × 1022 A m2, the probability of the dipole entering a reversed state is less than 2% after 20 kyr. This probability rises to 11% after 50 kyr. An imminent geomagnetic reversal is not supported by paleomagnetic observations. The current rate of decline in the dipole moment is unusual but within the natural variability predicted by the stochastic model.

Reverse Ecology: from systems to environments and back.

Science.gov (United States)

Levy, Roie; Borenstein, Elhanan

2012-01-01

The structure of complex biological systems reflects not only their function but also the environments in which they evolved and are adapted to. Reverse Ecology-an emerging new frontier in Evolutionary Systems Biology-aims to extract this information and to obtain novel insights into an organism's ecology. The Reverse Ecology framework facilitates the translation of high-throughput genomic data into large-scale ecological data, and has the potential to transform ecology into a high-throughput field. In this chapter, we describe some of the pioneering work in Reverse Ecology, demonstrating how system-level analysis of complex biological networks can be used to predict the natural habitats of poorly characterized microbial species, their interactions with other species, and universal patterns governing the adaptation of organisms to their environments. We further present several studies that applied Reverse Ecology to elucidate various aspects of microbial ecology, and lay out exciting future directions and potential future applications in biotechnology, biomedicine, and ecological engineering.

Factors affecting timing of closure and non-reversal of temporary ileostomies.

Science.gov (United States)

Sier, M F; van Gelder, L; Ubbink, D T; Bemelman, W A; Oostenbroek, R J

2015-09-01

Although stoma closure is considered a simple surgical intervention, the interval between construction and reversal is often prolonged, and some ileostomies may never be reversed. We evaluated possible predictors for non-reversal and prolonged interval between construction and reversal. In a cohort study of ileostomy patients treated in a large teaching hospital, we collected data from the surgical complication and enterostomal therapists' registries between January 2001 and December 2011. Parameters responsible for morbidity, mortality, length of stay and time interval between construction and reversal were analysed. Of 485 intentionally temporary ileostomies, 359 were reversed after a median of 5.6 months (IQR 3.8-8.9 months), while 126 (26%) remained permanent. End ileostomy and intra-abdominal abscess independently delayed reversal. Age, end ileostomy, higher body mass index and preoperative radiotherapy were independent factors for non-reversal. Median duration of hospitalisation for reversal was 7.0 days (5-13 days). Morbidity and mortality were 31 and 0.9%, respectively. In 20 patients (5.5%), re-ileostomy was necessary. A substantial number of ileostomies that are intended to be temporary will never be reversed. If reversed, the interval between construction and reversal is longer than anticipated, while morbidity after reversal and duration of hospitalisation are considerable. Besides a temporary ileostomy, there are two other options: no diversion or a permanent colostomy. Shared decision-making is to be preferred in these situations.

Monoamines stimulate sex reversal in the saddleback wrasse.

Science.gov (United States)

Larson, Earl T; Norris, David O; Gordon Grau, E; Summers, Cliff H

2003-02-15

Monoamine neurotransmitters (norepinephrine, dopamine, and serotonin) play an important role in reproduction and sexual behavior throughout the vertebrates. They are the first endogenous chemical signals in the regulation of the hypothalamo-pituitary-gonadal (HPG) axis. In teleosts with behavioral sex determination, much is known about behavioral cues that induce sex reversal. The cues are social, processed via the visual system and depend on the ratio of females to males in the population. The mechanisms by which these external behavioral cues are converted to an internal chemical regulatory process are largely unknown. The protogynous Hawaiian saddleback wrasse, Thalassoma duperrey, was used to investigate the biological pathway mediating the conversion of a social cue into neuroendocrine events regulating sex reversal. Because monoamines play an important role in the regulation of the HPG axis, they were selected as likely candidates for such a conversion. To determine if monoamines could affect sex reversal, drugs affecting monoamines were used in an attempt to either induce sex reversal under non-permissive conditions, or prevent sex reversal under permissive conditions. Increasing norepinephrine or blocking dopamine or serotonin lead to sex reversal in experimental animals under non-permissive conditions. Increasing serotonin blocked sex reversal under permissive conditions, while blocking dopamine or norepinephrine retarded the process. The results presented here demonstrate that monoamines contribute significantly to the control sex reversal. Norepinephrine stimulates initiation and completion of gonadal sex of reversal as well as color change perhaps directly via its effects on the HPG axis. Dopamine exercises inhibitory action on the initiation of sex reversal while 5-HT inhibits both initiation and completion of sex reversal. The serotonergic system appears to be an integral part of the pathway mediating the conversion of a social cue into a

Magneto-thermal conduction and magneto-caloric effect in poly and nano crystalline forms of multiferroic GdCrO3

International Nuclear Information System (INIS)

Uma, S; Philip, J

2014-01-01

Gadolinium chromite, GdCrO 3 , belongs to the family of rare earth chromites, exhibiting multiferroism with coupling between electric polarization and magnetic ordering. It is understood that the interaction between Gd 3+ and Cr 3+ ions is responsible for switchable polarization in this system. Below Néel temperature the spins of Cr 3+ ions interact in anti-parallel through super exchange mechanism, giving rise to antiferromagnetic ordering at around 169 K in poly and nanocrystalline phases of this material. In order to understand the nature of spin–lattice coupling and magnon–phonon interaction in the intermediate temperature range (150–250 K), the magneto-thermal conduction and magneto-caloric effect in poly and nanocrystalline forms of this material are reported. These properties show anomalies around 169 K, which is described as due to spin–phonon coupling. When particle sizes are reduced to nanometer scales, thermal conductivity decreases significantly while specific heat capacity increases. The former is explained as due to reduction in phonon mean free path and phonon scattering from nanoparticle interfaces, while the latter is ascribed to contributions from Einstein oscillators at weakly bound atoms at the interfaces of nanocrystals. (paper)

Microstructure and magnetocaloric effect in cast LaFe11.5Si1.5Bx (x=0.5, 1.0)

International Nuclear Information System (INIS)

Zhang, H.; Long, Y.; Cao, Q.; Mudryk, Ya.; Zou, M.; Gschneidner, K.A.; Pecharsky, V.K.

2010-01-01

Phase formation, structure, and the magnetocaloric effect (MCE) in as-cast LaFe 11.5 Si 1.5 B x (x=0.5, 1.0) compounds have been studied. The Curie temperatures, T C , are ∼211 and 230 K for x=0.5 and 1.0, respectively, which are higher than that of annealed LaFe 11.5 Si 1.5 (T C =183 K), while the maximum magnetic entropy changes at the respective T C under a magnetic field change of 0-5 T are 7.8 and 5.8 J/(kg K). Wavelength dispersive spectrometry (WDS) analysis shows that only a small fraction of boron atoms is dissolved in the NaZn 13 -type structure phase, and that the compositions of the as-cast LaFe 11.5 Si 1.5 B x (x=0.5, 1.0) alloys are much different from the intended nominal compositions. These as-cast alloys exhibit second-order magnetic phase transitions and low MCEs. However, based on the relative cooling power, the as-cast LaFe 11.5 Si 1.5 B x alloys are promising candidates for magnetic refrigerants over a wide temperature range.

Reversible Thermoset Adhesives

Science.gov (United States)

Mac Murray, Benjamin C. (Inventor); Tong, Tat H. (Inventor); Hreha, Richard D. (Inventor)

2016-01-01

Embodiments of a reversible thermoset adhesive formed by incorporating thermally-reversible cross-linking units and a method for making the reversible thermoset adhesive are provided. One approach to formulating reversible thermoset adhesives includes incorporating dienes, such as furans, and dienophiles, such as maleimides, into a polymer network as reversible covalent cross-links using Diels Alder cross-link formation between the diene and dienophile. The chemical components may be selected based on their compatibility with adhesive chemistry as well as their ability to undergo controlled, reversible cross-linking chemistry.

Spatial and reversal learning in the Morris water maze are largely resistant to six hours of REM sleep deprivation following training

Science.gov (United States)

Walsh, Christine M.; Booth, Victoria; Poe, Gina R.

2011-01-01

This first test of the role of REM (rapid eye movement) sleep in reversal spatial learning is also the first attempt to replicate a much cited pair of papers reporting that REM sleep deprivation impairs the consolidation of initial spatial learning in the Morris water maze. We hypothesized that REM sleep deprivation following training would impair both hippocampus-dependent spatial learning and learning a new target location within a familiar environment: reversal learning. A 6-d protocol was divided into the initial spatial learning phase (3.5 d) immediately followed by the reversal phase (2.5 d). During the 6 h following four or 12 training trials/day of initial or reversal learning phases, REM sleep was eliminated and non-REM sleep left intact using the multiple inverted flowerpot method. Contrary to our hypotheses, REM sleep deprivation during four or 12 trials/day of initial spatial or reversal learning did not affect training performance. However, some probe trial measures indicated REM sleep-deprivation–associated impairment in initial spatial learning with four trials/day and enhancement of subsequent reversal learning. In naive animals, REM sleep deprivation during normal initial spatial learning was followed by a lack of preference for the subsequent reversal platform location during the probe. Our findings contradict reports that REM sleep is essential for spatial learning in the Morris water maze and newly reveal that short periods of REM sleep deprivation do not impair concurrent reversal learning. Effects on subsequent reversal learning are consistent with the idea that REM sleep serves the consolidation of incompletely learned items. PMID:21677190

Nocturnal Reversed Flows Above Parallel Ridges in Perdigão, Portugal

Science.gov (United States)

Krishnamurthy, R.; Fernando, H. J.; Leo, L. S.; Vassallo, D.; Hocut, C. M.; Creegan, E.; Rodriguez, C. V.; Palma, J. L.

2017-12-01

Prediction of topographically forced or induced wind events is extremely important for dispersion modeling and wind energy studies in complex terrain. To improve the current understanding of micro-scale processes over complex terrain, a large-scale field experiment was conducted in Perdigão, Portugal from May 1st, 2017 to June 15th, 2017. Measurements over a periodic valley were performed using 52 meteorological met-masts, 30 Doppler Lidars (scanning & vertical profilers), 2 tethered lifting systems and other remote sensing instruments (Sodar-rass, wind profilers & radiometer), and radiosondes were released every 6 hours over the period of study. The observations showed several cases of flow reversals confined to a thin layer of 70 - 100 m above the ridge under stably stratified conditions. These flow reversals were mostly observed during the lee wave formation over the periodic valley. It was observed that the flow reversal occurs predominantly under two atmospheric conditions: a) presence of large recirculation zones on the lee side of the hill causing a pressure gradient between the lee-side floor and the mountain ridge, and b) local change in the horizontal pressure gradient due to differential heating rates of the neighboring valley atmospheres. Microscale flow simulations could capture these observed flow reversals. Based on the network of tower instruments and remote sensing devices, the development, structure and occurrences of the flow reversals are being analyzed and quantified. Since these flow reversals are observed within the rotor swept area of modern wind turbines, they would drastically increase the fatigue loads on wind turbine blades. This presentation will include reversed flow observations from several synchronized scanning Doppler Lidars and meteorological towers and a theoretical framework for reverse flow over parallel valleys.

Zero field reversal probability in thermally assisted magnetization reversal

Science.gov (United States)

Prasetya, E. B.; Utari; Purnama, B.

2017-11-01

This paper discussed about zero field reversal probability in thermally assisted magnetization reversal (TAMR). Appearance of reversal probability in zero field investigated through micromagnetic simulation by solving stochastic Landau-Lifshitz-Gibert (LLG). The perpendicularly anisotropy magnetic dot of 50×50×20 nm3 is considered as single cell magnetic storage of magnetic random acces memory (MRAM). Thermally assisted magnetization reversal was performed by cooling writing process from near/almost Curie point to room temperature on 20 times runs for different randomly magnetized state. The results show that the probability reversal under zero magnetic field decreased with the increase of the energy barrier. The zero-field probability switching of 55% attained for energy barrier of 60 k B T and the reversal probability become zero noted at energy barrier of 2348 k B T. The higest zero-field switching probability of 55% attained for energy barrier of 60 k B T which corespond to magnetif field of 150 Oe for switching.

Tuning the magnetic phase transition and the magnetocaloric properties of La0.7Ca0.3MnO3 compounds through Sm-doping

Science.gov (United States)

Thanh, Tran Dang; Dung, Nguyen Thi; Van Dang, Nguyen; Bau, Le Viet; Piao, Hong-Guang; Phan, The Long; Huyen Yen, Pham Duc; Hau, Kieu Xuan; Kim, Dong-Hyun; Yu, Seong-Cho

2018-05-01

In this work, we point out that the width and the nature of the magnetic phase transition, TC value, and as well as magnetocaloric effect in La0.7-xSmxCa0.3MnO3 compounds can be easily modified through Sm-doped into La-site. With an increasing Sm concentration, a systematic decrease in the magnetization, TC, and magnetic entropy change (ΔSm) are observed. The Arrott-plot proveds that the samples with x = 0 and 0.1 undergoing a first-order phase transition. Meanwhile, sample x = 0.2 undergoes a second-order phase transition, which exhibits a high value of the relative cooling power (81.5 J/kg at ΔH = 10 kOe). An analysis of the critical behavior based on the modified Arrott plots method has been done for sample x = 0.2. The results proved a coexistence of the long- and short-range interactions in La0.5Sm0.2Ca0.3MnO3 compound.

Reverse Osmosis

Indian Academy of Sciences (India)

many applications, one of which is desalination of seawater. The inaugural Nobel Prize in Chemistry was awarded in 1901 to van 't Hoff for his seminal work in this area. The present article explains the principle of osmosis and reverse osmosis. Osmosis and Reverse Osmosis. As the name suggests, reverse osmosis is the ...

HiDi: an efficient reverse engineering schema for large-scale dynamic regulatory network reconstruction using adaptive differentiation

KAUST Repository

Deng, Yue

2017-08-05

Motivation: The use of differential equations (ODE) is one of the most promising approaches to network inference. The success of ODE-based approaches has, however, been limited, due to the difficulty in estimating parameters and by their lack of scalability. Here, we introduce a novel method and pipeline to reverse engineer gene regulatory networks from gene expression of time series and perturbation data based upon an improvement on the calculation scheme of the derivatives and a pre-filtration step to reduce the number of possible links. The method introduces a linear differential equation model with adaptive numerical differentiation that is scalable to extremely large regulatory networks. Results: We demonstrate the ability of this method to outperform current state-of-the-art methods applied to experimental and synthetic data using test data from the DREAM4 and DREAM5 challenges. Our method displays greater accuracy and scalability. We benchmark the performance of the pipeline with respect to dataset size and levels of noise. We show that the computation time is linear over various network sizes.

Compressibility Effects in the Dynamics of the Reversed-Field Pinch

International Nuclear Information System (INIS)

Onofri, M.; Malara, F.; Veltri, P.

2008-01-01

We study the reversed-field pinch through the numerical solution of the compressible magnetohydrodynamic equations. Two cases are investigated: In the first case the pressure is derived from an adiabatic condition, and in the second case the pressure equation includes heating terms due to resistivity and viscosity. In the adiabatic case a single helicity state is observed, and the reversed-field pinch configuration is formed for short time intervals and is finally lost. In the nonadiabatic case the system reaches a multiple helicity state, and the reversal parameter remains negative for a longer time. The results show the importance of compressibility in determining the large scale dynamics of the system

Complex magnetic behaviour and evidence of a superspin glass state in the binary intermetallic compound Er5Pd2

Science.gov (United States)

Sharma, Mohit K.; Yadav, Kavita; Mukherjee, K.

2018-05-01

The binary intermetallic compound Er5Pd2 has been investigated using dc and ac magnetic susceptibilities, magnetic memory effect, isothermal magnetization, non-linear dc susceptibility, heat capacity and magnetocaloric effect studies. Interestingly, even though the compound does not show geometrical frustration it undergoes glassy magnetic phase transition below 17.2 K. Investigation of dc magnetization and heat capacity data divulged absence of long-ranged magnetic ordering. Through the magnetic memory effect, time dependent magnetization and ac susceptibility studies it was revealed that the compound undergoes glass-like freezing below 17.2 K. Analysis of frequency dependence of this transition temperature through scaling and Arrhenius law; along with the Mydosh parameter indicate, that the dynamics in Er5Pd2 are due to the presence of strongly interacting superspins rather than individual spins. This phase transition was further investigated by non-linear dc susceptibility and was characterized by static critical exponents γ and δ. Our results indicate that this compound shows the signature of superspin glass at low temperature. Additionally, both conventional and inverse magnetocaloric effect was observed with a large value of magnetic entropy change and relative cooling power. Our results suggest that Er5Pd2 can be classified as a superspin glass system with large magnetocaloric effect.

Properties of Pliocene sedimentary geomagnetic reversal records from the Mediterranean

OpenAIRE

Linssen, J.H.

1991-01-01

In the history of the Earth the dipolar geomagnetic field has frequently reversed polarity. Though this property was already known early this century (Brunhes, 1906), nowadays the characteristics and the origin of polarity transitions are still largely unknown. The geomagnetic field and its variations are recorded in rocks as a natural remanent magnetization (NRM) during the formation of these rocks. The study of the NRM in sedimentary reversal records is the subject of this dissertation.

Managing Reverse Logistics or Reversing Logistics Management?

NARCIS (Netherlands)

M.P. de Brito (Marisa)

2004-01-01

textabstractIn the past, supply chains were busy fine-tuning the logistics from raw material to the end customer. Today an increasing flow of products is going back in the chain. Thus, companies have to manage reverse logistics as well.This thesis contributes to a better understanding of reverse

Magnetocaloric effects in Mn1.35Fe0.65P1−xSix compounds

International Nuclear Information System (INIS)

Geng Yao-Xiang; Tegus O; Bi Li-Ge

2012-01-01

The structural and magnetocaloric properties of Mn 1.35 Fe 0.65 P 1−x Si x compounds are investigated. The Si-substituted compounds, Mn 1.35 Fe 0.65 P 1−x Si x with x = 0.52, 0.54, 0.55, 0.56, and 0.57, are prepared by high-energy ball milling and the solid-state reaction. The X-ray diffraction shows that the compounds crystallize into the Fe 2 P-type hexagonal structure with space group P6-bar2m. The magnetic measurements show that the Curie temperature of the compound increases from 253 K for x = 0.52 to 296 K for x = 0.56. The isothermal magnetic-entropy change of the Mn 1.35 Fe 0.65 P 1−x Si x compound decreases with the Si content increasing. The maximal value of the magnetic-entropy change is about 7.0 J/kg·K in the Mn 1.35 Fe 0.65 P 0.48 Si 0.52 compound with a field change of 1.5 T. The compound quenched in water possesses a larger magnetic entropy change and a smaller thermal hysteresis than the non-quenched samples. The thermal hysteresis of the compound is less than 3.5 K. The maximum adiabatic temperature change is about 1.4 K in the Mn 1.35 Fe 0.65 P 0.45 Si 0.55 compound with a field change of 1.48 T. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Adiabatic physics of an exchange-coupled spin-dimer system: Magnetocaloric effect, zero-point fluctuations, and possible two-dimensional universal behavior

International Nuclear Information System (INIS)

Brambleby, J.; Goddard, P. A.; Singleton, John; Jaime, Marcelo; Lancaster, T.

2017-01-01

We present the magnetic and thermal properties of the bosonic-superfluid phase in a spin-dimer network using both quasistatic and rapidly changing pulsed magnetic fields. The entropy derived from a heat-capacity study reveals that the pulsed-field measurements are strongly adiabatic in nature and are responsible for the onset of a significant magnetocaloric effect (MCE). In contrast to previous predictions we show that the MCE is not just confined to the critical regions, but occurs for all fields greater than zero at sufficiently low temperatures. We explain the MCE using a model of the thermal occupation of exchange-coupled dimer spin states and highlight that failure to take this effect into account inevitably leads to incorrect interpretations of experimental results. In addition, the heat capacity in our material is suggestive of an extraordinary contribution from zero-point fluctuations and appears to indicate universal behavior with different critical exponents at the two field-induced critical points. Finally, the data at the upper critical point, combined with the layered structure of the system, are consistent with a two-dimensional nature of spin excitations in the system.

A review of reverse logistics and closed-loop supply chains

DEFF Research Database (Denmark)

Govindan, Kannan; Soleimani, Hamed

2016-01-01

Today, the task of developing reverse logistics and closed-loop supply chains in both developed and developing industries is accepted as a vital need in our societies. The growing interest in reverse issues can be clearly seen in the large number of publications, especially the ones that consider...... case studies in various industries. Based on its missions, Journal of Cleaner Production (JCP) is one of the most active journals in this field. Therefore, a comprehensive review is undertaken of the publications in the field of reverse logistics and closed-loop supply chains; the selection process...... December 2014 have been selected and reviewed. The selected papers are then analyzed based on their content and the appropriate developed categories. The results clarify the main trends in reverse logistics and closed-loop supply chain subjects for the Journal of Cleaner Production and the evaluations...

Phase analysis and magnetocaloric properties of Zr substituted Gd-Si-Ge alloys

International Nuclear Information System (INIS)

Prabahar, K.; Raj Kumar, D.M.; Manivel Raja, M.; Chandrasekaran, V.

2011-01-01

The structure, microstructure, magneto-structural transition and magnetocaloric effect have been investigated in series of (Gd 5-x Zr x )Si 2 Ge 2 alloys with 0≤x≥0.20. X-ray powder diffraction analysis revealed the presence of orthorhombic structure for Zr containing alloys at room temperature in contrast to the monoclinic structure observed in the parent Gd 5 Si 2 Ge 2 alloy. The microstructural studies reveal that, low Zr addition (x≤0.1) resulted in low volume fraction of detrimental Gd 5 Si 3 -type secondary phase compared to that present in the parent alloy. All the Zr containing alloys have shown the presence of only second order magnetic transition unlike the parent alloy showing both first order structural and second order magnetic transition. A moderate (ΔS) M value of -5.5 J/kg K was obtained for the x=0.05 alloy at an enhanced operating temperature of 292 K compared to -7.8 J/kg K at 274 K of the parent alloy for an applied field of 2 T. The interesting feature of Zr (x=0.05) containing alloy is the wide operating temperature range of ∼25 K than that of ∼10-12 K for the parent, which resulted in enhanced net refrigerant capacity of 103 J/kg compared to that of 53 J/kg for the parent alloy. - Research highlights: → Zr addition in Gd 5 Si 2 Ge 2 alloy has been investigated for the first time to reduce the 5:3-type (Gd 5 Si 3 ) secondary phase formed when using commercial grade elements in Gd 5 Si 2 Ge 2 alloy. → It is interesting to observe that Zr addition decrease the volume fraction 5:3. → The refrigerator capacity and transition temperature of Zr added alloy is greater than the pure Gd 5 Si 2 Ge 2 which makes this alloy promising for room temperature application.

On the influence of thermal hysteresis on the performance of thermomagnetic motors

Science.gov (United States)

Bessa, C. V. X.; Ferreira, L. D. R.; Horikawa, O.; Monteiro, J. C. B.; Gandra, F. G.; Gama, S.

2017-12-01

Although thermal hysteresis might be a problem in the magnetocaloric refrigeration, the same is not necessarily true for thermomagnetic motor applications. This work presents a comparison of the magnetocaloric properties of materials with first order magnetic transition (having large or narrow thermal hysteresis) to those with second order magnetic transition, assessing the application of these materials in thermomagnetic motors through a thermodynamic approach. Results show that the larger the thermal hysteresis, the higher the specific work produced in a thermal cycle. This allows operation at higher temperature differences with high efficiency relative to Carnot efficiency, when compared with systems using narrow hysteresis and second order transition materials.

Reversal of oxycodone and hydrocodone tolerance by diazepam.

Science.gov (United States)

Gonek, Maciej; Akbarali, Hamid I; Henderson, Graeme; Dewey, William L

2017-11-01

The Centers for Disease Control has declared opioid abuse to be an epidemic. Overdose deaths are largely assumed to be the result of excessive opioid consumption. In many of these cases, however, opioid abusers are often polydrug abusers. Benzodiazepines are one of the most commonly co-abused substances and pose a significant risk to opioid users. In 2016, the FDA required boxed warnings - the FDA's strongest warning - for prescription opioid analgesics and benzodiazepines about the serious risks associated with using these medications at the same time. The point of our studies was to evaluate the interactions between these two classes of drugs. We investigated whether diazepam adds to the depressant effects of opioids or do they alter the levels of tolerance to opioids. In the present study, we have found that the antinociceptive tolerance that developed to repeated administration of oxycodone was reversed by an acute dose of diazepam. Antinociceptive tolerance to hydrocodone was also reversed by acute injection of diazepam; however, a fourfold higher dose of diazepam was required when compared to reversal of oxycodone-induced tolerance. These doses of diazepam did not potentiate the acute antinociceptive effect of either opioid. The same dose of diazepam that reversed oxycodone antinociceptive tolerance also reversed oxycodone locomotor tolerance while having no potentiating effects. These studies show that diazepam does not potentiate the acute effect of prescription opioids but reverses the tolerance developed after chronic administration of the drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

Critical evaluation of reverse engineering tool Imagix 4D!

Science.gov (United States)

Yadav, Rashmi; Patel, Ravindra; Kothari, Abhay

2016-01-01

The comprehension of legacy codes is difficult to understand. Various commercial reengineering tools are available that have unique working styles, and are equipped with their inherent capabilities and shortcomings. The focus of the available tools is in visualizing static behavior not the dynamic one. Therefore, it is difficult for people who work in software product maintenance, code understanding reengineering/reverse engineering. Consequently, the need for a comprehensive reengineering/reverse engineering tool arises. We found the usage of Imagix 4D to be good as it generates the maximum pictorial representations in the form of flow charts, flow graphs, class diagrams, metrics and, to a partial extent, dynamic visualizations. We evaluated Imagix 4D with the help of a case study involving a few samples of source code. The behavior of the tool was analyzed on multiple small codes and a large code gcc C parser. Large code evaluation was performed to uncover dead code, unstructured code, and the effect of not including required files at preprocessing level. The utility of Imagix 4D to prepare decision density and complexity metrics for a large code was found to be useful in getting to know how much reengineering is required. At the outset, Imagix 4D offered limitations in dynamic visualizations, flow chart separation (large code) and parsing loops. The outcome of evaluation will eventually help in upgrading Imagix 4D and posed a need of full featured tools in the area of software reengineering/reverse engineering. It will also help the research community, especially those who are interested in the realm of software reengineering tool building.

Garbage-free reversible constant multipliers for arbitrary integers

DEFF Research Database (Denmark)

Mogensen, Torben Ægidius

2013-01-01

We present a method for constructing reversible circuitry for multiplying integers by arbitrary integer constants. The method is based on Mealy machines and gives circuits whose size are (in the worst case) linear in the size of the constant. This makes the method unsuitable for large constants...

Magnetization reversal in single molecule magnets

Science.gov (United States)

Bokacheva, Louisa

2002-09-01

I have studied the magnetization reversal in single molecule magnets (SMMs). SMMs are Van der Waals crystals, consisting of identical molecules containing transition metal ions, with high spin and large uniaxial magnetic anisotropy. They can be considered as ensembles of identical, iso-oriented nanomagnets. At high temperature, these materials behave as superparamagnets and their magnetization reversal occurs by thermal activation. At low temperature they become blocked, and their magnetic relaxation occurs via thermally assisted tunneling or pure quantum tunneling through the anisotropy barrier. We have conducted detailed experimental studies of the magnetization reversal in SMM material Mn12-acetate (Mn12) with S = 10. Low temperature measurements were conducted using micro-Hall effect magnetometry. We performed hysteresis and relaxation studies as a function of temperature, transverse field, and magnetization state of the sample. We identified magnetic sublevels that dominate the tunneling at a given field, temperature and magnetization. We observed a crossover between thermally assisted and pure quantum tunneling. The form of this crossover depends on the magnitude and direction of the applied field. This crossover is abrupt (first-order) and occurs in a narrow temperature interval (tunneling mechanisms in Mn12.

Simulation and resolution of voltage reversal in microbial fuel cell stack.

Science.gov (United States)

Sugnaux, Marc; Savy, Cyrille; Cachelin, Christian Pierre; Hugenin, Gérald; Fischer, Fabian

2017-08-01

To understand the biotic and non-biotic contributions of voltage reversals in microbial fuel cell stacks (MFC) they were simulated with an electronic MFC-Stack mimic. The simulation was then compared with results from a real 3L triple MFC-Stack with shared anolyte. It showed that voltage reversals originate from the variability of biofilms, but also the external load plays a role. When similar biofilm properties were created on all anodes the likelihood of voltage reversals was largely reduced. Homogenous biofilms on all anodes were created by electrical circuit alternation and electrostimulation. Conversely, anolyte recirculation, or increased nutriment supply, postponed reversals and unfavourable voltage asymmetries on anodes persisted. In conclusion, voltage reversals are often a negative event but occur also in close to best MFC-Stack performance. They were manageable and this with a simplified MFC architecture in which multiple anodes share the same anolyte. Copyright © 2017 Elsevier Ltd. All rights reserved.

Logistics Management: New trends in the Reverse Logistics

Science.gov (United States)

Antonyová, A.; Antony, P.; Soewito, B.

2016-04-01

Present level and quality of the environment are directly dependent on our access to natural resources, as well as their sustainability. In particular production activities and phenomena associated with it have a direct impact on the future of our planet. Recycling process, which in large enterprises often becomes an important and integral part of the production program, is usually in small and medium-sized enterprises problematic. We can specify a few factors, which have direct impact on the development and successful application of the effective reverse logistics system. Find the ways to economically acceptable model of reverse logistics, focusing on converting waste materials for renewable energy, is the task in progress.

A Mirnov loop array for field-reversed configurations

International Nuclear Information System (INIS)

Tuszewski, M.

1990-01-01

An array of 64 magnetic pick-up loops has been used for stability studies of large field-reversed configurations in the FRX-C/LSM device. This array proved reliable, could resolve signals of a few Gauss, and allowed the detection of several plasma instabilities. 3 refs., 4 figs

Reversible Edema-Like Changes Along the Optic Tract Following Pipeline-Assisted Coiling of a Large Anterior Communicating Artery Aneurysm.

Science.gov (United States)

La Pira, Biagia; Brinjikji, Waleed; Hunt, Christopher; Chen, John J; Lanzino, Giuseppe

2017-06-01

Aneurysmal volume expansion after endovascular treatment is caused by intra-aneurysmal thrombosis in the early postembolization period. Although postembolization mass effect on cranial nerves and other adjacent structures has been previously reported, we are unaware of reports involving the anterior visual pathway. A 66-year-old woman with a 2-week history of blurred vision without headache was found to have a large, unruptured anterior communicating artery aneurysm. One month after endovascular treatment of the aneurysm with coiling and flow diversion, the patient developed decreased vision in her right eye and a left homonymous hemianopia. Magnetic resonance imaging demonstrated compression of the right optic nerve, chiasm, and edema of the right optic tract. The patient was treated with a course of high dose corticosteroids, and over the course of several weeks, her vision improved and the optic tract edema resolved. We alert clinicians to this rare but potentially reversible visual complication of endovascular treatment of intracranial aneurysms.

Utilisation of ISA Reverse Genetics and Large-Scale Random Codon Re-Encoding to Produce Attenuated Strains of Tick-Borne Encephalitis Virus within Days.

Science.gov (United States)

de Fabritus, Lauriane; Nougairède, Antoine; Aubry, Fabien; Gould, Ernest A; de Lamballerie, Xavier

2016-01-01

Large-scale codon re-encoding is a new method of attenuating RNA viruses. However, the use of infectious clones to generate attenuated viruses has inherent technical problems. We previously developed a bacterium-free reverse genetics protocol, designated ISA, and now combined it with large-scale random codon-re-encoding method to produce attenuated tick-borne encephalitis virus (TBEV), a pathogenic flavivirus which causes febrile illness and encephalitis in humans. We produced wild-type (WT) and two re-encoded TBEVs, containing 273 or 273+284 synonymous mutations in the NS5 and NS5+NS3 coding regions respectively. Both re-encoded viruses were attenuated when compared with WT virus using a laboratory mouse model and the relative level of attenuation increased with the degree of re-encoding. Moreover, all infected animals produced neutralizing antibodies. This novel, rapid and efficient approach to engineering attenuated viruses could potentially expedite the development of safe and effective new-generation live attenuated vaccines.

Reverse genetics with animal viruses. NSV reverse genetics

International Nuclear Information System (INIS)

Mebatsion, T.

2005-01-01

New strategies to genetically manipulate the genomes of several important animal pathogens have been established in recent years. This article focuses on the reverse genetics techniques, which enables genetic manipulation of the genomes of non-segmented negative-sense RNA viruses. Recovery of a negative-sense RNA virus entirely from cDNA was first achieved for rabies virus in 1994. Since then, reverse genetic systems have been established for several pathogens of medical and veterinary importance. Based on the reverse genetics technique, it is now possible to design safe and more effective live attenuated vaccines against important viral agents. In addition, genetically tagged recombinant viruses can be designed to facilitate serological differentiation of vaccinated animals from infected animals. The approach of delivering protective immunogens of different pathogens using a single vector was made possible with the introduction of the reverse genetics system, and these novel broad-spectrum vaccine vectors have potential applications in improving animal health in developing countries. (author)

Magnetic reversal spurts: Rain gauges for comet showers

International Nuclear Information System (INIS)

Lutz, T.M.

1988-01-01

Abrupt increases in the rate of magnetic reversals (magnetic reversal spurts) were first studied by many others. They hypothesized that spurts result from increased turbulence in the earth's core dynamo during episodes of intense bolide bombardment of the earth. Mechanisms for creating episodes of intense bombardment of the earth involve gravitational perturbation of the Oort cloud of comets, either by a hidden planet, a solar companion, or massive matter in the galactic plane. Herein, the time variation in reversal rate is analyzed using methods of statistical density estimation. A smooth, continuous estimate of reversal rate is obtained using an adaptive kernel method, in which the kernel width is adjusted as a function of reversal rate. The estimates near the ends of the data series (at 165 my ago and the present) are obtained by extending the data by reflection. The results show that the reversal spurts are not associated demonstrably with extinctions or well-dated impacts. If the spurts do record episodes of intense bombardment of the earth, then the mass extinctions do not, in general, occur at times of impacts. Furthermore, the large impact craters seen are not obviously related to the spurts, suggesting that the craters may have been caused by bolides of a different nature and with a different temporal pattern. However, the most simple explanation seems to be that the spurts do not record comet showers, either because the recording mechanism suggested by Muller and Morris is not effective or because comet showers are not triggered in the ways considered by Hut et al

Remagnetization of lava flows spanning the last geomagnetic reversal

Science.gov (United States)

Vella, Jérôme; Carlut, Julie; Valet, Jean-Pierre; Goff, Maxime Le; Soler, Vicente; Lopes, Fernando

2017-08-01

Large directional changes of remanent magnetization within lava flows that cooled during geomagnetic reversals have been reported in several studies. A geomagnetic scenario implies extremely rapid geomagnetic changes of several degrees per day, thus difficult to reconcile with the rate of the earth's core liquid motions. So far, no complete rock magnetic model provides a clear explanation. We revisited lava flows sandwiched between an underlying reverse and an overlying normal polarity flow marking the last reversal in three distinct volcanic sequences of the La Palma Island (Canary archipelago, Spain) that are characterized by a gradual evolution of the direction of their remanent magnetization from bottom to top. Cleaning efficiency of thermal demagnetization was not improved by very rapid heating and cooling rates as well as by continuous demagnetization using a Triaxe magnetometer. We did not observe partial self-reversals and minor changes in magnetic grain sizes are not related to the within-flow directional changes. Microscopic observations indicate poor exsolution, which suggests post-cooling thermochemical remagnetization processes. This scenario is strongly reinforced by laboratory experiments that show large resistance to thermal demagnetization when thermoremanence was acquired over a long time period. We speculate that in the present situation exsolution was reactivated during in field reheating and yielded formation of new magnetite, yet magnetic domain state rearrangements could also play a role. Initial reheating when the overlying flow took place, albeit moderate (less than 200-300 °C), was enough to produce overlying components with significantly higher unblocking temperatures.

Computational reverse shoulder prosthesis model: Experimental data and verification.

Science.gov (United States)

Martins, A; Quental, C; Folgado, J; Ambrósio, J; Monteiro, J; Sarmento, M

2015-09-18

The reverse shoulder prosthesis aims to restore the stability and function of pathological shoulders, but the biomechanical aspects of the geometrical changes induced by the implant are yet to be fully understood. Considering a large-scale musculoskeletal model of the upper limb, the aim of this study is to evaluate how the Delta reverse shoulder prosthesis influences the biomechanical behavior of the shoulder joint. In this study, the kinematic data of an unloaded abduction in the frontal plane and an unloaded forward flexion in the sagittal plane were experimentally acquired through video-imaging for a control group, composed of 10 healthy shoulders, and a reverse shoulder group, composed of 3 reverse shoulders. Synchronously, the EMG data of 7 superficial muscles were also collected. The muscle force sharing problem was solved through the minimization of the metabolic energy consumption. The evaluation of the shoulder kinematics shows an increase in the lateral rotation of the scapula in the reverse shoulder group, and an increase in the contribution of the scapulothoracic joint to the shoulder joint. Regarding the muscle force sharing problem, the musculoskeletal model estimates an increased activity of the deltoid, teres minor, clavicular fibers of the pectoralis major, and coracobrachialis muscles in the reverse shoulder group. The comparison between the muscle forces predicted and the EMG data acquired revealed a good correlation, which provides further confidence in the model. Overall, the shoulder joint reaction force was lower in the reverse shoulder group than in the control group. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reversal of liver fibrosis: From fiction to reality.

Science.gov (United States)

Zoubek, Miguel Eugenio; Trautwein, Christian; Strnad, Pavel

2017-04-01

In chronic liver diseases, an ongoing hepatocellular injury together with inflammatory reaction results in activation of hepatic stellate cells (HSCs) and increased deposition of extracellular matrix (ECM) termed as liver fibrosis. It can progress to cirrhosis that is characterized by parenchymal and vascular architectural changes together with the presence of regenerative nodules. Even at late stage, liver fibrosis is reversible and the underlying mechanisms include a switch in the inflammatory environment, elimination or regression of activated HSCs and degradation of ECM. While animal models have been indispensable for our understanding of liver fibrosis, they possess several important limitations and need to be further refined. A better insight into the liver fibrogenesis resulted in a large number of clinical trials aiming at reversing liver fibrosis, particularly in patients with non-alcoholic steatohepatitis. Collectively, the current developments demonstrate that reversal of liver fibrosis is turning from fiction to reality. Copyright © 2017. Published by Elsevier Ltd.

Elastocaloric cooling device: Materials and modeling

DEFF Research Database (Denmark)

Tusek, Jaka; Engelbrecht, Kurt; Pryds, Nini

2015-01-01

In the last decade we have witnessed the development of alternative solid-state cooling technologies based on so-called ferroic (caloric) effects. A large effort nowadays is devoted to investigating solid-state refrigeration using the magnetocaloric effect (change of temperature upon application ...

Reversible physical absorption of SO2 by ionic liquids

DEFF Research Database (Denmark)

Huang, Jun; Riisager, Anders; Fehrmann, Rasmus

2006-01-01

Ionic liquids can reversibly absorb large amounts of molecular SO2 gas under ambient conditions with the gas captured in a restricted configuration, possibly allowing SO2 to probe the internal cavity structures in ionic liquids besides being useful for SO2 removal in pollution control....

A Framework for Reverse Engineering Large C++ Code Bases

NARCIS (Netherlands)

Telea, Alexandru; Byelas, Heorhiy; Voinea, Lucian

2009-01-01

When assessing the quality and maintainability of large C++ code bases, tools are needed for extracting several facts from the source code, such as: architecture, structure, code smells, and quality metrics. Moreover, these facts should be presented in such ways so that one can correlate them and

A Framework for Reverse Engineering Large C++ Code Bases

NARCIS (Netherlands)

Telea, Alexandru; Byelas, Heorhiy; Voinea, Lucian

2008-01-01

When assessing the quality and maintainability of large C++ code bases, tools are needed for extracting several facts from the source code, such as: architecture, structure, code smells, and quality metrics. Moreover, these facts should be presented in such ways so that one can correlate them and

Time-reversal and Bayesian inversion

Science.gov (United States)

Debski, Wojciech

2017-04-01

Probabilistic inversion technique is superior to the classical optimization-based approach in all but one aspects. It requires quite exhaustive computations which prohibit its use in huge size inverse problems like global seismic tomography or waveform inversion to name a few. The advantages of the approach are, however, so appealing that there is an ongoing continuous afford to make the large inverse task as mentioned above manageable with the probabilistic inverse approach. One of the perspective possibility to achieve this goal relays on exploring the internal symmetry of the seismological modeling problems in hand - a time reversal and reciprocity invariance. This two basic properties of the elastic wave equation when incorporating into the probabilistic inversion schemata open a new horizons for Bayesian inversion. In this presentation we discuss the time reversal symmetry property, its mathematical aspects and propose how to combine it with the probabilistic inverse theory into a compact, fast inversion algorithm. We illustrate the proposed idea with the newly developed location algorithm TRMLOC and discuss its efficiency when applied to mining induced seismic data.

Phase formation kinetics, hardness and magnetocaloric effect of sub-rapidly solidified LaFe11.6Si1.4 plates during isothermal annealing

Science.gov (United States)

Dai, Yuting; Xu, Zhishuai; Luo, Zhiping; Han, Ke; Zhai, Qijie; Zheng, Hongxing

2018-05-01

High-temperature phase transition behavior and intrinsic brittleness of NaZn13-type τ1 phase in La-Fe-Si magnetocaloric materials are two key problems from the viewpoint of materials production and practical applications. In the present work, the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation was introduced to quantitatively characterize the formation kinetics of τ1 phase in sub-rapidly solidified LaFe11.6Si1.4 plates during the isothermal annealing process. Avrami index was estimated to be 0.43 (∼0.5), which suggests that the formation of τ1 phase is in a diffusion-controlled one-dimensional growth mode. Meanwhile, it is found that the Vickers hardness as a function of annealing time for sub-rapidly solidified plates also agrees well with the JMAK equation. The Vickers hardness of τ1 phase was estimated to be about 754. Under a magnetic field change of 30 kOe, the maximum magnetic entropy change was about 22.31 J/(kg·K) for plates annealed at 1323 K for 48 h, and the effective magnetic refrigeration capacity reached 191 J/kg.

Hydrazine-induced thermo-reversible optical shifts in silver-gelatin bionanocomposites

Science.gov (United States)

Aimé, Carole; Rietveld, Ivo B.; Coradin, Thibaud

2011-03-01

Bionanocomposites formed by in situ growth of silver nanoparticles within gelatin gels exhibit large (up to 100 nm) thermo-reversible optical shifts resulting from the enhancement of gel matrix scattering by the interaction of the biopolymer with the hydrazine reducing agent.

An algebra of reversible computation.

Science.gov (United States)

Wang, Yong

2016-01-01

We design an axiomatization for reversible computation called reversible ACP (RACP). It has four extendible modules: basic reversible processes algebra, algebra of reversible communicating processes, recursion and abstraction. Just like process algebra ACP in classical computing, RACP can be treated as an axiomatization foundation for reversible computation.

On thermodynamic and microscopic reversibility

International Nuclear Information System (INIS)

Crooks, Gavin E

2011-01-01

The word 'reversible' has two (apparently) distinct applications in statistical thermodynamics. A thermodynamically reversible process indicates an experimental protocol for which the entropy change is zero, whereas the principle of microscopic reversibility asserts that the probability of any trajectory of a system through phase space equals that of the time reversed trajectory. However, these two terms are actually synonymous: a thermodynamically reversible process is microscopically reversible, and vice versa

Reversibility of female sterilization.

Science.gov (United States)

Siegler, A M; Hulka, J; Peretz, A

1985-04-01

The discussion considers the current status of reversibility of sterilization in the US and describes clinical and experimental efforts for developing techniques designed for reversibility. It focuses on regret following sterilization, reversal potential of current sterilization techniques, patient selection, current reversal techniques, results of sterilization procedures, experimental approaches to reversal of current techniques of sterilization, and sterilization procedures devised for reversibility, in humans and in animals. Request is the 1st stage of reversal, but a request for sterilization reversal (SR) does not always mean regret for a decision made at the time. Frequently it is a wish to restore fertility because life circumstances have changed after a sterilization that was ppropriate at the time it was performed. Schwyhart and Kutner reviewed 22 studies published between 1949-69 in which they found that the percentage of patients regretting the procedure ranged from 1.3-15%. Requests for reversal remain low in most countries, but if sterilization becomes a more popular method of contraception, requests will also increase. The ideal operation considered as a reversaible method of sterilization should include an easy, reliable outpatient method of tubal occlusion with miniml risk or patient discomfort that subsequently could be reversed without the need for a major surgical intervention. Endoscopic methods have progressed toward the 1st objective. A recent search of the literature uncovered few series of SR of more than 50 cases. The 767 operations found were analyzed with regard to pregnancy outcome. The precent of live births varied from 74-78.8%, and the occurance of tubal pregnancies ranged from 1.7-6.5%. All of the confounding variables in patient selection and small numbers of reported procedures preclude any conclusion about the different techniques or the number of operations that give a surgeon a level of expertise. Few authors classify their

Reversible Redox Chemistry of Azo Compounds for Sodium-Ion Batteries.

Science.gov (United States)

Luo, Chao; Xu, Gui-Liang; Ji, Xiao; Hou, Singyuk; Chen, Long; Wang, Fei; Jiang, Jianjun; Chen, Zonghai; Ren, Yang; Amine, Khalil; Wang, Chunsheng

2018-03-05

Sustainable sodium-ion batteries (SSIBs) using renewable organic electrodes are promising alternatives to lithium-ion batteries for the large-scale renewable energy storage. However, the lack of high-performance anode material impedes the development of SSIBs. Herein, we report a new type of organic anode material based on azo group for SSIBs. Azobenzene-4,4'-dicarboxylic acid sodium salt is used as a model to investigate the electrochemical behaviors and reaction mechanism of azo compound. It exhibits a reversible capacity of 170 mAh g -1 at 0.2C. When current density is increased to 20C, the reversible capacities of 98 mAh g -1 can be retained for 2000 cycles, demonstrating excellent cycling stability and high rate capability. The detailed characterizations reveal that azo group acts as an electrochemical active site to reversibly bond with Na + . The reversible redox chemistry between azo compound and Na ions offer opportunities for developing long-cycle-life and high-rate SSIBs. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Constraining the reversing and non-reversing modes of the geodynamo. New insights from magnetostratigraphy.

Science.gov (United States)

Gallet, Y.; Pavlov, V.; Shatsillo, A.; Hulot, G.

2015-12-01

Constraining the evolution in the geomagnetic reversal frequency over hundreds of million years is not a trivial matter. Beyond the fact that there are long periods without reversals, known as superchrons, and periods with many reversals, the way the reversal frequency changes through time during reversing periods is still debated. A smooth evolution or a succession of stationary segments have both been suggested to account for the geomagnetic polarity time scale since the Middle-Late Jurassic. Sudden changes from a reversing mode to a non-reversing mode of the geodynamo may also well have happened, the switch between the two modes having then possibly been controlled by the thermal conditions at the core-mantle boundary. There is, nevertheless, a growing set of magnetostratigraphic data, which could help decipher a proper interpretation of the reversal history, in particular in the early Paleozoic and even during the Precambrian. Although yielding a fragmentary record, these data reveal the occurrence of both additional superchrons and periods characterized by extremely high, not to say extraordinary, magnetic reversal frequencies. In this talk, we will present a synthesis of these data, mainly obtained from Siberia, and discuss their implication for the magnetic reversal behavior over the past billion years.

Properties of Pliocene sedimentary geomagnetic reversal records from the Mediterranean

NARCIS (Netherlands)

Linssen, J.H.

1991-01-01

In the history of the Earth the dipolar geomagnetic field has frequently reversed polarity. Though this property was already known early this century (Brunhes, 1906), nowadays the characteristics and the origin of polarity transitions are still largely unknown. The geomagnetic field and its

Another look at trading costs and short-term reversal profits

NARCIS (Netherlands)

W.A. de Groot (Wilma); J.J. Huij (Joop); W. Zhou (Weili)

2012-01-01

textabstractSeveral studies report that abnormal returns associated with short-term reversal investment strategies diminish once trading costs are taken into account. We show that the impact of trading costs on the strategies' profitability can largely be attributed to excessively trading in small

Combined Ideal and Kinetic Effects on Reversed Shear Alfven Eigenmodes

International Nuclear Information System (INIS)

Gorelenkov, N.N.; Kramer, G.J.; Nazikian, R.

2011-01-01

A theory of Reversed Shear Alfven Eigenmodes (RSAEs) is developed for reversed magnetic field shear plasmas when the safety factor minimum, qmin, is at or above a rational value. The modes we study are known sometimes as either the bottom of the frequency sweep or the down sweeping RSAEs. We show that the ideal MHD theory is not compatible with the eigenmode solution in the reversed shear plasma with qmin above integer values. Corrected by special analytic FLR condition MHD dispersion of these modes nevertheless can be developed. Large radial scale part of the analytic RSAE solution can be obtained from ideal MHD and expressed in terms of the Legendre functions. The kinetic equation with FLR effects for the eigenmode is solved numerically and agrees with the analytic solutions. Properties of RSAEs and their potential implications for plasma diagnostics are discussed.

Energy Capture from Thermolytic Solutions in Microbial Reverse-Electrodialysis Cells

KAUST Repository

Cusick, R. D.

2012-03-01

Reverse electrodialysis allows for the capture of energy from salinity gradients between salt and fresh waters, but potential applications are currently limited to coastal areas and the need for a large number of membrane pairs. Using salt solutions that could be continuously regenerated with waste heat (≥40°C) and conventional technologies would allow much wider applications of salinity-gradient power production. We used reverse electrodialysis ion-exchange membrane stacks in microbial reverse- electrodialysis cells to efficiently capture salinity-gradient energy from ammonium bicarbonate salt solutions. The maximum power density using acetate reached 5.6 watts per square meter of cathode surface area, which was five times that produced without the dialysis stack, and 3.0 ± 0.05 watts per square meter with domestic wastewater. Maximum energy recovery with acetate reached 30 ± 0.5%.

Large adiabatic temperature change in magnetoelastic transition in Ni{sub 50}Mn{sub 35}Cr{sub 2}Sn{sub 13} Heusler alloy of granular nanostructure

Energy Technology Data Exchange (ETDEWEB)

Prakash, H. R.; Sharma, S. K.; Ram, S., E-mail: prakashhr73@gmail.com [Materials Science Centre, Indian Institute of Technology, Kharagpur-721302 (India); Chatterjee, S. [High Magnetic Field Lab, UGC-DAE Consortium of Scientific Research, Kolkata-700098 (India)

2016-05-06

The Ni-Mn-Sn alloys are a pioneering series of magnetocaloric materials of a huge heat-energy exchanger in the martensite transition. A small additive of nearly 2 at% Cr effectively tunes the valence electron density of 8.090 electrons per atom and a large change in the entropy ΔS{sub M←A} = 4.428 J/kg-K (ΔS{sub M→A} = 3.695 J/kg-K in the recycle) at the martensite ← austenite phase transition as it is useful for the magnetic refrigeration and other cooling devices. The Cr additive tempers the tetragonality with the aspect ratio c/a = 0.903 of the martensite phase and exhibits an adiabatic temperature change of 10 K. At room temperature, a hysteresis loop exhibits 48.91 emu/g saturation magnetization and 82.1 Oe coercivity.

Reversible Posterior Leukoencephalopathy Syndrome Induced by Pazopanib

International Nuclear Information System (INIS)

Chelis, Leonidas; Kakolyris, Stylianos; Souftas, Vasilios; Amarantidis, Kiriakos; Xenidis, Nikolaos; Chamalidou, Eleni; Dimopoulos, Prokopios; Michailidis, Prodromos; Christakidis, Evagelos; Prassopoulos, Panagiotis

2012-01-01

The reversible posterior leukoencephalopathy syndrome is a clinical/radiological syndrome characterized by headache, seizures, impaired vision, acute hypertension, and typical magnetic resonance imaging findings. There are several reports in the literature that depict its occurrence in cancer patients. The list of common anticancer and supportive care drugs that predispose to reversible posterior leukoencephalopathy syndrome is expanding and includes not only a large number of chemotherapeutic agents but also an increased number of new targeted drugs, particularly angiogenesis inhibitors such as bevacizumab,sorefenib and sunitinib. Pazopanib is an oral tyrosine kinase inhibitor targeting vascular endothelial growth factor receptor, platelet-derived growth factor receptor, and c-Kit which after a positive phase III randomized clinical trial in patients with advanced renal cell cancer received FDA approval for the treatment of advanced renal cell carcinoma. Until now no cases of reversible posterior leukoencephalopathy syndrome induced by pazopanib have been reported. We present the case of a 40 years old female patient with heavily pre-treated metastatic renal cell carcinoma who received pazopanib as salvage treatment. After 21 days of pazopanib therapy the patient referred to the emergency department with epileptic seizure, impaired vision at both eyes and headache. MRI of the brain revealed subcortical oedema at the occipital and parietal lobes bilaterally. She was treated with anticonvulsants, i.v. administration of mannitol and antihypertensives and she recovered completely from her symptoms and was discharged on the tenth hospital day. A brain MRI performed 3 weeks after showed that the subcortical oedema had been subsided. In conclusion this is the first case of pazopanib induced reversible posterior leukoencephalopathy syndrome. Although usually reversible, this syndrome is a serious and potentially life threatening adverse effect, if untreated, that should

Reversible Posterior Leukoencephalopathy Syndrome Induced by Pazopanib

Directory of Open Access Journals (Sweden)

Chelis Leonidas

2012-10-01

Full Text Available Abstract Background The reversible posterior leukoencephalopathy syndrome is a clinical/radiological syndrome characterized by headache, seizures, impaired vision, acute hypertension, and typical magnetic resonance imaging findings. There are several reports in the literature that depict its occurrence in cancer patients. The list of common anticancer and supportive care drugs that predispose to reversible posterior leukoencephalopathy syndrome is expanding and includes not only a large number of chemotherapeutic agents but also an increased number of new targeted drugs, particularly angiogenesis inhibitors such as bevacizumab,sorefenib and sunitinib. Pazopanib is an oral tyrosine kinase inhibitor targeting vascular endothelial growth factor receptor, platelet-derived growth factor receptor, and c-Kit which after a positive phase III randomized clinical trial in patients with advanced renal cell cancer received FDA approval for the treatment of advanced renal cell carcinoma. Until now no cases of reversible posterior leukoencephalopathy syndrome induced by pazopanib have been reported. Case report We present the case of a 40 years old female patient with heavily pre-treated metastatic renal cell carcinoma who received pazopanib as salvage treatment. After 21 days of pazopanib therapy the patient referred to the emergency department with epileptic seizure, impaired vision at both eyes and headache. MRI of the brain revealed subcortical oedema at the occipital and parietal lobes bilaterally. She was treated with anticonvulsants, i.v. administration of mannitol and antihypertensives and she recovered completely from her symptoms and was discharged on the tenth hospital day. A brain MRI performed 3 weeks after showed that the subcortical oedema had been subsided. Conclusion In conclusion this is the first case of pazopanib induced reversible posterior leukoencephalopathy syndrome. Although usually reversible, this syndrome is a serious and

Reversibly Bistable Flexible Electronics

KAUST Repository

Alfaraj, Nasir

2015-05-01

Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent. While maintaining large-scale production and prototyping rapidity, this flexible and translucent scheme demonstrates the potential to transform conventionally stiff electronic devices into thin and foldable ones without compromising long-term performance and reliability. In this work, we report on the fabrication and characterization of reversibly bistable flexible electronic switches that utilize flexible n-channel metal-oxide-semiconductor field-effect transistors. The transistors are fabricated initially on rigid (100) silicon substrates before they are peeled off. They can be used to control flexible batches of light-emitting diodes, demonstrating both the relative ease of scaling at minimum cost and maximum reliability and the feasibility of integration. The peeled-off silicon fabric is about 25 µm thick. The fabricated devices are transferred to a reversibly bistable flexible platform through which, for example, a flexible smartphone can be wrapped around a user’s wrist and can also be set back to its original mechanical position. Buckling and cyclic bending of such host platforms brings a completely new dimension to the development of flexible electronics, especially rollable displays.

Reverse logistics - a framework

NARCIS (Netherlands)

M.P. de Brito (Marisa); R. Dekker (Rommert)

2002-01-01

textabstractIn this paper we define and compare Reverse Logistics definitions. We start by giving an understanding framework of Reverse Logistics: the why-what-how. By this means, we put in context the driving forces for Reverse Logistics, a typology of return reasons, a classification of

Tubal Ligation Reversal

Science.gov (United States)

... seal off the fallopian tubes, such as the Essure or Adiana systems, generally aren't reversible. Why ... electrocautery). Some types of sterilization, such as the Essure or Adiana systems, aren't considered reversible. Risks ...

Evolution of magnetic properties and exchange interactions in Ru doped YbCrO3

International Nuclear Information System (INIS)

Dalal, Biswajit; Sarkar, Babusona; De, S K; Dev Ashok, Vishal

2016-01-01

Magnetic properties of YbCr 1−x Ru x O 3 as a function of temperature and magnetic field have been investigated to explore the intriguing magnetic phenomena in rare-earth orthochromites. A quantitative analysis of x-ray photoelectron spectroscopy confirms the mixed valence state (Yb 3+  and Yb 2+ ) of Yb ions for the highest doped sample. Field-cooled magnetization reveals a broad peak around 75 K and then becomes zero at about 20–24 K, due to the antiparallel coupling between Cr 3+ and Yb 3+ moments. An increase of the Ru 4+ ion concentration leads to a slight increase of compensation temperature T comp from 20 to 24 K, but the Néel temperature remains constant. A larger value of the magnetic moment of Yb ions gives rise to negative magnetization at low temperature. An external magnetic field significantly modifies the temperature dependent magnetization. Simulation of temperature dependent magnetization data, below T N , based on the three (two) magnetic sub-lattice model predicts stronger intra-sublattice exchange interaction than that of inter-sublattice. Thermal hysteresis and Arrot plots suggest first order magnetic phase transition. Random substitution of Ru 4+ ion reduces the magnetic relaxation time. Weak ferromagnetic component in canted antiferromagnetic system and negative internal magnetic field cause zero-field-cooled exchange bias effect. Large magnetocrystalline anisotropy associated with Ru creates high coercivity in the Ru doped sample. A maximum value of magnetocaloric effect is found around the antiferromagnetic ordering of Yb 3+ ions. Antiferromagnetic transition at about 120 K and temperature induced magnetization reversal lead to normal and inverse magnetocaloric effects in the same material. (paper)

Coronal Polarization of Pseudostreamers and the Solar Polar Field Reversal

Science.gov (United States)

Rachmeler, L. A.; Guennou, C.; Seaton, D. B.; Gibson, S. E.; Auchere, F.

2016-01-01

The reversal of the solar polar magnetic field is notoriously hard to pin down due to the extreme viewing angle of the pole. In Cycle 24, the southern polar field reversal can be pinpointed with high accuracy due to a large-scale pseudostreamer that formed over the pole and persisted for approximately a year. We tracked the size and shape of this structure with multiple observations and analysis techniques including PROBA2/SWAP EUV images, AIA EUV images, CoMP polarization data, and 3D tomographic reconstructions. We find that the heliospheric field reversed polarity in February 2014, whereas in the photosphere, the last vestiges of the previous polar field polarity remained until March 2015. We present here the evolution of the structure and describe its identification in the Fe XII 1074nm coronal emission line, sensitive to the Hanle effect in the corona.

Modification of encapsulation pressure of reverse micelles in liquid ethane.

Science.gov (United States)

Peterson, Ronald W; Nucci, Nathaniel V; Wand, A Joshua

2011-09-01

Encapsulation within reverse micelles dissolved in low viscosity fluids offers a potential solution to the slow tumbling problem presented by large soluble macromolecules to solution NMR spectroscopy. The reduction in effective macromolecular tumbling is directly dependent upon the viscosity of the solvent. Liquid ethane is of sufficiently low viscosity at pressures below 5000 psi to offer a significant advantage. Unfortunately, the viscosity of liquid ethane shows appreciable pressure dependence. Reverse micelle encapsulation in liquid ethane often requires significantly higher pressures, which obviates the potential advantages offered by liquid ethane over liquid propane. Addition of co-surfactants or co-solvents can be used to manipulate the minimum pressure required to obtain stable, well-behaved solutions of reverse micelles prepared in liquid ethane. A library of potential additives is examined and several candidates suitable for use with encapsulated proteins are described. Copyright © 2011 Elsevier Inc. All rights reserved.

Nonlinear dynamics of tearing modes in the reversed field pinch

International Nuclear Information System (INIS)

Holmes, J.A.; Carreras, B.A.; Diamond, P.H.; Lynch, V.E.

1988-01-01

The results of investigations of nonlinear tearing-mode dynamics in reversed field pinch plasmas are described. The linear instabilities have poloidal mode number m = 1 and toroidal mode numbers 10approx. < napprox. <20, and the resonant surfaces are therefore in the plasma core. The nonlinear dynamics result in dual cascade processes. The first process is a rapid m = 1 spectral broadening toward high n, with a simultaneous spreading of magnetic turbulence radially outward toward the field-reversal surface. Global m = 0 perturbations, which are driven to large amplitudes by the m = 1 instabilities, in turn trigger the m = 1 spectral broadening by back coupling to the higher n. The second process is a cascade toward large m and is mediated by m = 2 modes. The m = 2 perturbations have the structure of localized, driven current sheets and nonlinearly stabilize the m = 1 modes by transferring m = 1 energy to small-scale dissipation. The calculated spectrum has many of the qualitative features observed in experiments

49 CFR 230.89 - Reverse gear.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Reverse gear. 230.89 Section 230.89 Transportation... Reversing Gear § 230.89 Reverse gear. (a) General provisions. Reverse gear, reverse levers, and quadrants... quadrant. Proper counterbalance shall be provided for the valve gear. (b) Air-operated power reverse gear...

HiDi: an efficient reverse engineering schema for large-scale dynamic regulatory network reconstruction using adaptive differentiation.

Science.gov (United States)

Deng, Yue; Zenil, Hector; Tegnér, Jesper; Kiani, Narsis A

2017-12-15

The use of differential equations (ODE) is one of the most promising approaches to network inference. The success of ODE-based approaches has, however, been limited, due to the difficulty in estimating parameters and by their lack of scalability. Here, we introduce a novel method and pipeline to reverse engineer gene regulatory networks from gene expression of time series and perturbation data based upon an improvement on the calculation scheme of the derivatives and a pre-filtration step to reduce the number of possible links. The method introduces a linear differential equation model with adaptive numerical differentiation that is scalable to extremely large regulatory networks. We demonstrate the ability of this method to outperform current state-of-the-art methods applied to experimental and synthetic data using test data from the DREAM4 and DREAM5 challenges. Our method displays greater accuracy and scalability. We benchmark the performance of the pipeline with respect to dataset size and levels of noise. We show that the computation time is linear over various network sizes. The Matlab code of the HiDi implementation is available at: www.complexitycalculator.com/HiDiScript.zip. hzenilc@gmail.com or narsis.kiani@ki.se. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Materials for room temperature magnetic refrigeration

Energy Technology Data Exchange (ETDEWEB)

Rosendahl Hansen, B.

2010-07-15

Magnetic refrigeration is a cooling method, which holds the promise of being cleaner and more efficient than conventional vapor-compression cooling. Much research has been done during the last two decades on various magnetic materials for this purpose and today a number of materials are considered candidates as they fulfill many of the requirements for a magnetic refrigerant. However, no one material stands out and the field is still active with improving the known materials and in the search for a better one. Magnetic cooling is based on the magnetocaloric effect, which causes a magnetic material to change its temperature when a magnetic field is applied or removed. For room temperature cooling, one utilizes that the magnetocaloric effect peaks near magnetic phase transitions and so the materials of interest all have a critical temperature within the range of 250 - 310 K. A magnetic refrigerant should fulfill a number of criteria, among these a large magnetic entropy change, a large adiabatic temperature change, preferably little to no thermal or magnetic hysteresis and the material should have the stability required for long term use. As the temperature range required for room temperature cooling is some 40 - 50 K, the magnetic refrigerant should also be able to cover this temperature span either by exhibiting a very broad peak in magnetocaloric effect or by providing the opportunity for creating a materials series with varying transition temperatures. (Author)

Reversible Communicating Processes

Directory of Open Access Journals (Sweden)

Geoffrey Brown

2016-02-01

Full Text Available Reversible distributed programs have the ability to abort unproductive computation paths and backtrack, while unwinding communication that occurred in the aborted paths. While it is natural to assume that reversibility implies full state recovery (as with traditional roll-back recovery protocols, an interesting alternative is to separate backtracking from local state recovery. For example, such a model could be used to create complex transactions out of nested compensable transactions where a programmer-supplied compensation defines the work required to "unwind" a transaction. Reversible distributed computing has received considerable theoretical attention, but little reduction to practice; the few published implementations of languages supporting reversibility depend upon a high degree of central control. The objective of this paper is to demonstrate that a practical reversible distributed language can be efficiently implemented in a fully distributed manner. We discuss such a language, supporting CSP-style synchronous communication, embedded in Scala. While this language provided the motivation for the work described in this paper, our focus is upon the distributed implementation. In particular, we demonstrate that a "high-level" semantic model can be implemented using a simple point-to-point protocol.

Quasi-invariant modified Sobolev norms for semi linear reversible PDEs

International Nuclear Information System (INIS)

Faou, Erwan; Grébert, Benoît

2010-01-01

We consider a general class of infinite dimensional reversible differential systems. Assuming a nonresonance condition on linear frequencies, we construct for such systems almost invariant pseudo-norms that are close to Sobolev-like norms. This allows us to prove that if the Sobolev norm of index s of the initial data z 0 is sufficiently small (of order ε) then the Sobolev norm of the solution is bounded by 2ε over a very long time interval (of order ε −r with r arbitrary). It turns out that this theorem applies to a large class of reversible semi-linear partial differential equations (PDEs) including the nonlinear Schrödinger (NLS) equation on the d-dimensional torus. We also apply our method to a system of coupled NLS equations which is reversible but not Hamiltonian. We also note that for the same class of reversible systems we can prove a Birkhoff normal form theorem, which in turn implies the same bounds on the Sobolev norms. Nevertheless the techniques that we use to prove the existence of quasi-invariant pseudo-norms are much more simple and direct

Objections to tubal sterilization: what reversibility can and cannot overcome.

Science.gov (United States)

Shain, R N

1980-09-01

In a study of 1074 women, 696 and 338 subjects would not seriously consider permanent and hypothetically reversible sterilization, respectively; they were asked to explain their feelings. The reason accounting for most objections to permanent sterilization (65%) was irreversibility and of the subjects who would not consider reversible sterilization or were unsure, 42.7% attributed their principal objection to unnecessary surgery, a factor at least currently intrinsic to the procedure and not readily overcome by education. Many of the remaining objections to both permanent and reversible sterilization may be amenable to change either through education or financial subsidies. In response to a question concerning female attractiveness subsequent to permanent sterilization, 3% of the sample felt attractiveness would decrease and 17.5% were unsure of the surgery's effect. Unsure responses were largely negative in character. This issue is important because of its relationship to intention to undergo sterilization. Upon consideration of reversible sterilization, negative and unsure responses significantly declined, even on the part of those women whose friends have had a poor experience with currently available procedures. Thus, whereas the option of reversibility cannot overcome objections to surgery, it does overcome those regarding permanency; moreover, the "temporary" character it bestows upon surgical sterilization appears to help certain individuals overcome their fears of losing their physical appeal as a result of such procedures.

Magnetocaloric effect and the influence of pressure on magnetic properties of La-excess pseudo-binary alloys La{sub 1+δ}(Fe{sub 0.85}Si{sub 0.15}){sub 13}

Energy Technology Data Exchange (ETDEWEB)

Vuong, Van Hiep; Do Thi, Kim Anh [Faculty of Physics, VNU-University of Science, 334 Nguyen Trai, Ha Noi (Viet Nam); Thuan Nguyen, Khac; Nhat Hoang, Nam, E-mail: namnhat@gmail.com, E-mail: nhathn@vnu.edu.vn [Faculty of Engineering Physics and Nanotechnology, VNU-University of Engineering and Technology, 144 Xuan Thuy, Ha Noi (Viet Nam); Le, Van Hong [Duy Tan University, 25 Quang Trung str., Da Nang (Viet Nam)

2016-10-14

The La-excess alloys La{sub 1+δ}(Fe{sub 0.85}Si{sub 0.15}){sub 13} (δ = 0.06 and 0.09) exhibit large magnetocaloric effect which has been attributed to the occurrence of itinerant-electron metamagnetic transition near the Curie temperature T{sub C}. The maximum entropy change −ΔS{sub m} was shown to be from 4.5 to 11.5 J/kg K for the applied field variation ΔH from 20 to 70 kOe, respectively. The estimated relative cooling power for ΔH = 70 kOe was 418 J/kg. The alloys show a typical NaZn{sub 13}-type cubic structure, featuring a doping-induced magnetovolume effect with the increase in T{sub C}. Under the applied pressure up to 2 GPa, the T{sub C} as deduced from resistance measurements decreased linearly, ΔT{sub C} = 113 (for δ = 0.06) and 111 K (for δ = 0.09), together with a corresponding decrease of resistivity, Δρ = 6.1 μΩ m at room temperature for both samples. At a low pressure, the effect of spontaneous magnetostriction on T{sub C} caused by applying the pressure appeared to have a similar magnitude to that of the negative magnetovolume effect caused by La-excess doping. In comparison with other stoichiometric La(Fe{sub 1−x}Si{sub x}){sub 13} compounds, the pressure in our case was shown to have a smaller influence on T{sub C}.

Reversal of idiopathic hypogonadotropic hypogonadism: a cohort study in Chinese patients

Science.gov (United States)

Mao, Jiang-Feng; Xu, Hong-Li; Duan, Jin; Chen, Rong-Rong; Li, Li; Li, Bin; Nie, Min; Min, Le; Zhang, Hong-Bing; Wu, Xue-Yan

2015-01-01

Although idiopathic hypogonadotropic hypogonadism (IHH) has traditionally been viewed as a life-long disease caused by a deficiency of gonadotropin-releasing hormone neurons, a portion of patients may gradually regain normal reproductive axis function during hormonal replacement therapy. The predictive factors for potential IHH reversal are largely unknown. The aim of our study was to investigate the incidence and clinical features of IHH male patients who had reversed reproductive axis function. In this retrospective cohort study, male IHH patients were classified into a reversal group (n = 18) and a nonreversal group (n = 336). Concentration of gonadotropins and testosterone, as well as testicle sizes and sperm counts, were determined. Of 354 IHH patients, 18 (5.1%) acquired normal reproductive function during treatment. The median age for reversal was 24 years old (range 21–34 years). Compared with the nonreversal group, the reversible group had higher basal luteinizing hormone (LH) (1.0 ± 0.7 IU l-1 vs 0.4 ± 0.4 IU l−1, P < 0.05) and stimulated LH (28.3 ± 22.6 IU l−1 vs 1.9 ± 1.1 IU l−1, P < 0.01) levels, as well as larger testicle size (5.1 ± 2.6 ml vs 1.5 ± 0.3 ml, P < 0.01), at the initial visit. In summary, larger testicle size and higher stimulated LH concentrations are favorite parameters for reversal. Our finding suggests that reversible patients may retain partially active reproductive axis function at initial diagnosis. PMID:25578938

Reversal of idiopathic hypogonadotropic hypogonadism: a cohort study in Chinese patients

Directory of Open Access Journals (Sweden)

Jiang-Feng Mao

2015-06-01

Full Text Available Although idiopathic hypogonadotropic hypogonadism (IHH has traditionally been viewed as a life-long disease caused by a deficiency of gonadotropin-releasing hormone neurons, a portion of patients may gradually regain normal reproductive axis function during hormonal replacement therapy. The predictive factors for potential IHH reversal are largely unknown. The aim of our study was to investigate the incidence and clinical features of IHH male patients who had reversed reproductive axis function. In this retrospective cohort study, male IHH patients were classified into a reversal group (n = 18 and a nonreversal group (n = 336. Concentration of gonadotropins and testosterone, as well as testicle sizes and sperm counts, were determined. Of 354 IHH patients, 18 (5.1% acquired normal reproductive function during treatment. The median age for reversal was 24 years old (range 21-34 years. Compared with the nonreversal group, the reversible group had higher basal luteinizing hormone (LH (1.0 ± 0.7 IU l -[1] vs 0.4 ± 0.4 IU l−1 , P< 0.05 and stimulated LH (28.3 ± 22.6 IU l−1 vs 1.9 ± 1.1 IU l−1 , P< 0.01 levels, as well as larger testicle size (5.1 ± 2.6 ml vs 1.5 ± 0.3 ml, P< 0.01, at the initial visit. In summary, larger testicle size and higher stimulated LH concentrations are favorite parameters for reversal. Our finding suggests that reversible patients may retain partially active reproductive axis function at initial diagnosis.

Large and stable reversible lithium-ion storages from mesoporous SnO2 nanosheets with ultralong lifespan over 1000 cycles

Science.gov (United States)

Zhang, Xiao; Jiang, Bin; Guo, Jinxue; Xie, Yaping; Tang, Lin

2014-12-01

The major challenge to promote the commercialization of SnO2 anode materials is to construct unique structures and/or composites that could alleviate the volume effect and extend the lifespan. This study develops an efficient synthetic solution for the preparation of mesoporous SnO2 nanosheets, which involves an evaporation-induced selfassembly process and the following thermal treatment. Surfactant F127 is used as the soft template to form abundant cores. The as-prepared sample intrinsically inherits flexible sheet-like structure and porous features, as characterized with XRD, SEM, TEM and BET techniques. Based on these combining structural benefits, the sample is utilized as anode materials for lithium-ion batteries and exhibits excellent Li+ storage performance such as large and stable reversible capacity, good rate capability, and especially the outstanding durable cycling life of over 1000 cycles, which meets the demands of practical applications. The structural changes of SnO2 nanosheets are observed from the decomposed electrodes after different electrochemical cycles. Moreover, this synthesis strategy may offer an alternative and universal approach for synthesis of other transitional metal oxides or their binary composites as high-performance anode materials for lithium-ion batteries.

Reversed straining in axisymmetric compression test

DEFF Research Database (Denmark)

Arentoft, Mogens; Wanheim, Tarras; Lindegren, Maria

2005-01-01

A large group of the cold forging processes is carried out in a thick – walled container with the deformation force transmitted through a punch moving axially in the container. The work piece, being entrapped between punch and container will expand and exert a radial pressure resulting in an expa...... to simulate these conditions a reversed axisymmetrical material tester is designed and constructed. Three different materials were tested, aluminum alloy AA6082, technically pure copper (99.5%) and cold forging steel Ma8, at different temperatures found during cold forging....

Stochastic disk dynamo as a model of reversals of the Earth's magnetic field

International Nuclear Information System (INIS)

Ito, H.M.

1988-01-01

A stochastic model is given of a system composed of N similar disk dynamos interacting with one another. The time evolution of the system is governed by a master equation of the class introduced by van Kampen as relevant to stochastic macrosystems. In the model, reversals of the Earth's magnetic field are regarded as large deviations caused by a small random force of O(N/sup -1/2/) from one of the field polarities to the other. Reversal processes are studied by simulation, which shows that the model explains well the activities of the paleomagnetic field inclusive of statistical laws of the reversal sequence and the intensity distribution. Comparison are made between the model and dynamical disk dynamo models

Advanced Control Synthesis for Reverse Osmosis Water Desalination Processes.

Science.gov (United States)

Phuc, Bui Duc Hong; You, Sam-Sang; Choi, Hyeung-Six; Jeong, Seok-Kwon

2017-11-01

  In this study, robust control synthesis has been applied to a reverse osmosis desalination plant whose product water flow and salinity are chosen as two controlled variables. The reverse osmosis process has been selected to study since it typically uses less energy than thermal distillation. The aim of the robust design is to overcome the limitation of classical controllers in dealing with large parametric uncertainties, external disturbances, sensor noises, and unmodeled process dynamics. The analyzed desalination process is modeled as a multi-input multi-output (MIMO) system with varying parameters. The control system is decoupled using a feed forward decoupling method to reduce the interactions between control channels. Both nominal and perturbed reverse osmosis systems have been analyzed using structured singular values for their stabilities and performances. Simulation results show that the system responses meet all the control requirements against various uncertainties. Finally the reduced order controller provides excellent robust performance, with achieving decoupling, disturbance attenuation, and noise rejection. It can help to reduce the membrane cleanings, increase the robustness against uncertainties, and lower the energy consumption for process monitoring.

Combined ideal and kinetic effects on reversed shear Alfven eigenmodes

International Nuclear Information System (INIS)

Gorelenkov, N. N.; Kramer, G. J.; Nazikian, R.

2011-01-01

A reversed shear Alfven eigenmodes (RSAEs) theory has been developed for reversed magnetic field shear plasmas when the safety factor minimum, q min , is at or above a rational value. The modes we study are known sometimes as either the bottom of the frequency sweep or the down sweeping RSAEs. We show that, strictly speaking, the ideal MHD theory is not compatible with the eigenmode solution in the reversed shear plasma with q min above integer values. Corrected by a special analytic finite Larmor radius (FLR) condition, MHD dispersion of these modes nevertheless can be developed. Numerically, MHD structure can serve as a good approximation for the RSAEs.The large radial scale part of the analytic RSAE solution can be obtained from ideal MHD and expressed in terms of the Legendre functions. The kinetic equation with FLR effects for the eigenmode is solved numerically and agrees with the analytic solutions. Properties of RSAEs and their potential implications for plasma diagnostics are discussed.

Android Application Protection against Static Reverse Engineering based on Multidexing

Directory of Open Access Journals (Sweden)

Nak Young Kim

2016-11-01

Full Text Available DEX files are executable files of Android applications. Since DEX files are in the format of Java bytecodes, their Java source codes can be easily obtained using static reverse engineering tools. This results in numerous Android application thefts. There are some tools (e.g. bangcle, ijiami, liapp that protect Android applications against static reverse engineering utilizing dynamic code loading. These tools usually encrypt classes.dex in an APK file. When the application is launched, the encrypted classes.dex file is decrypted and dynamically loaded. However, these tools fail to protect multidex APKs, which include more than one DEX files (classes2.dex, classes3.dex, ... to accommodate large-sized execution codes. In this paper, we propose a technique that protects multidex Android applications against static reverse engineering. The technique can encrypt/decrypt multiple DEX files in APK files and dynamically load them. The experimental results show that the proposed technique can effiectively protect multidex APKs.

Effects of nuclear radiation on a high-reliability silicon power diode. 4: Analysis of reverse bias characteristics

Science.gov (United States)

Been, J. F.

1973-01-01

The effects of nuclear radiation on the reverse bias electrical characteristics of one hundred silicon power diodes were investigated. On a percentage basis, the changes in reverse currents were large but, due to very low initial values, this electrical characteristic was not the limiting factor in use of these diodes. These changes were interpreted in terms of decreasing minority carrier lifetimes as related to generation-recombination currents. The magnitudes of reverse voltage breakdown were unaffected by irradiation.

Calculation of reverse flow in inverted U-Tubes of steam generator during natural circulation

International Nuclear Information System (INIS)

Yang Ruichang; Liu Jinggong; Liu Ruolei; Qin Shiwei; Huang Yanping

2010-01-01

The mechanism of reverse flow in inverted U-tubes of steam generators of pressurized water reactors during natural circulation is analyzed by using the full range characteristic curve of parallel U-tubes. A lumped-distributed model to calculate the reverse flow occurred in inverted U-tubes of real steam generators with a large number of U-tubes during natural circulation is developed. The model has the advantages of quick calculation and high accuracy for the analysis of reverse flow in inverted U-tubes of real steam generators with natural circulation. This model has been used to calculate the normal and reverse flows occurred in inverted U-tubes of a steam generator with natural circulation. The comparison of calculated results indicates a well agreement with that predicted by the model in which normal or reverse flow in each individual U-tube is analyzed, which verifies the reliability of the model developed in this paper. (authors)

Quantum Vertex Model for Reversible Classical Computing

Science.gov (United States)

Chamon, Claudio; Mucciolo, Eduardo; Ruckenstein, Andrei; Yang, Zhicheng

We present a planar vertex model that encodes the result of a universal reversible classical computation in its ground state. The approach involves Boolean variables (spins) placed on links of a two-dimensional lattice, with vertices representing logic gates. Large short-ranged interactions between at most two spins implement the operation of each gate. The lattice is anisotropic with one direction corresponding to computational time, and with transverse boundaries storing the computation's input and output. The model displays no finite temperature phase transitions, including no glass transitions, independent of circuit. The computational complexity is encoded in the scaling of the relaxation rate into the ground state with the system size. We use thermal annealing and a novel and more efficient heuristic \\x9Dannealing with learning to study various computational problems. To explore faster relaxation routes, we construct an explicit mapping of the vertex model into the Chimera architecture of the D-Wave machine, initiating a novel approach to reversible classical computation based on quantum annealing.

Reverse screening methods to search for the protein targets of chemopreventive compounds

Science.gov (United States)

Huang, Hongbin; Zhang, Guigui; Zhou, Yuquan; Lin, Chenru; Chen, Suling; Lin, Yutong; Mai, Shangkang; Huang, Zunnan

2018-05-01

This article is a systematic review of reverse screening methods used to search for the protein targets of chemopreventive compounds or drugs. Typical chemopreventive compounds include components of traditional Chinese medicine, natural compounds and Food and Drug Administration (FDA)-approved drugs. Such compounds are somewhat selective but are predisposed to bind multiple protein targets distributed throughout diverse signaling pathways in human cells. In contrast to conventional virtual screening, which identifies the ligands of a targeted protein from a compound database, reverse screening is used to identify the potential targets or unintended targets of a given compound from a large number of receptors by examining their known ligands or crystal structures. This method, also known as in silico or computational target fishing, is highly valuable for discovering the target receptors of query molecules from terrestrial or marine natural products, exploring the molecular mechanisms of chemopreventive compounds, finding alternative indications of existing drugs by drug repositioning, and detecting adverse drug reactions and drug toxicity. Reverse screening can be divided into three major groups: shape screening, pharmacophore screening and reverse docking. Several large software packages, such as Schrödinger and Discovery Studio; typical software/network services such as ChemMapper, PharmMapper, idTarget and INVDOCK; and practical databases of known target ligands and receptor crystal structures, such as ChEMBL, BindingDB and the Protein Data Bank (PDB), are available for use in these computational methods. Different programs, online services and databases have different applications and constraints. Here, we conducted a systematic analysis and multilevel classification of the computational programs, online services and compound libraries available for shape screening, pharmacophore screening and reverse docking to enable non-specialist users to quickly learn and

Muscular activation during reverse and non-reverse chewing cycles in unilateral posterior crossbite.

Science.gov (United States)

Piancino, Maria Grazia; Farina, Dario; Talpone, Francesca; Merlo, Andrea; Bracco, Pietro

2009-04-01

The aim of this study was to characterize the kinematics and masseter muscle activation in unilateral posterior crossbite. Eighty-two children (8.6 +/- 1.3 yr of age) with unilateral posterior crossbite and 12 children (8.9 +/- 0.6 yr of age) with normal occlusion were selected for the study. Electromyography (EMG) and kinematics were concurrently recorded during mastication of a soft bolus and a hard bolus. The percentage of reverse cycles in the group of patients was 59.0 +/- 33.1% (soft bolus) and 69.7 +/- 29.7% (hard bolus) when chewing on the crossbite side. When chewing on the non-affected side, the number of reverse cycles was 16.7 +/- 24.5% (soft bolus) and 16.7 +/- 22.3% (hard bolus). The reverse cycles on the crossbite side were narrower with respect to the cycles on the non-affected side. Although both types of cycles in patients resulted in lower EMG activity of the masseter of the crossbite side than of the contralateral masseter, the activity of the non-affected side was larger for reverse than for non-reverse cycles. It was concluded that when chewing on the crossbite side, the masseter activity is reduced on the mastication side (crossbite) and is unaltered (non-reverse cycles) or increased (reverse) on the non-affected side.

The Causes of Preference Reversal.

OpenAIRE

Tversky, Amos; Slovic, Paul; Kahneman, Daniel

1990-01-01

Observed preference reversal cannot be adequately explained by violations of independence, the reduction axiom, or transitivity. The primary cause of preference reversal is the failure of procedure invariance, especially the overpricing of low-probability, high-payoff bets. This result violates regret theory and generalized (nonindependent) utility models. Preference reversal and a new reversal involving time preferences are explained by scale compatibility, which implies that payoffs are wei...

Reverse-hybrid robotic mesorectal excision for rectal cancer.

Science.gov (United States)

Park, In Ja; You, Y Nancy; Schlette, Erika; Nguyen, Sa; Skibber, John M; Rodriguez-Bigas, Miguel A; Chang, George J

2012-02-01

The robotic system offers potential technical advantages over laparoscopy for total mesorectal excision with radical lymphadenectomy for rectal cancer. However, the requirement for fixed docking limits its utility when the working volume is large or patient repositioning is required. The purpose of this study was to evaluate short-term outcomes associated with a novel setup to perform total mesorectal excision and radical lymphadenectomy for rectal cancer by the use of a "reverse" hybrid robotic-laparoscopic approach. This is a prospective consecutive cohort observational study of patients who underwent robotic rectal cancer resection from January 2009 to March 2011. During the study period, a technique of reverse-hybrid robotic-laparoscopic rectal resection with radical lymphadenectomy was developed. This technique involves reversal of the operative sequence with lymphovascular and rectal dissection to precede proximal colonic mobilization. This technique evolved from a conventional-hybrid resection with laparoscopic vascular control, colonic mobilization, and robotic pelvic dissection. Perioperative and short-term oncologic outcomes were analyzed. Thirty patients underwent reverse-hybrid resection. Median tumor location was 5 cm (interquartile range 3-9) from the anal verge. Median BMI was 27.6 (interquartile range 25.0-32.1 kg/m). Twenty (66.7%) received neoadjuvant chemoradiation. There were no conversions. Median blood loss was 100 mL (interquartile range 75-200). Total operation time was a median 369 (interquartile range 306-410) minutes. Median docking time was 6 (interquartile range 5-8) minutes, and console time was 98 (interquartile range 88-140) minutes. Resection was R0 in all patients; no patients had an incomplete mesorectal resection. Six patients (20%) underwent extended lymph node dissection or en bloc resection. Reverse-hybrid robotic surgery for rectal cancer maximizes the therapeutic applicability of the robotic and conventional laparoscopic

Discovery of ferromagnetism with large magnetic anisotropy in ZrMnP and HfMnP

Energy Technology Data Exchange (ETDEWEB)

Lamichhane, Tej N.; Taufour, Valentin; Kaluarachchi, Udhara S.; Bud' ko, Sergey L.; Canfield, Paul C. [Department of Physics and Astronomy, Iowa State University, Ames, Iowa 50011 (United States); The Ames Laboratory, US Department of Energy, Iowa State University, Ames, Iowa 50011 (United States); Masters, Morgan W. [Department of Physics and Astronomy, Iowa State University, Ames, Iowa 50011 (United States); Parker, David S. [Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Thimmaiah, Srinivasa [The Ames Laboratory, US Department of Energy, Iowa State University, Ames, Iowa 50011 (United States)

2016-08-29

ZrMnP and HfMnP single crystals are grown by a self-flux growth technique, and structural as well as temperature dependent magnetic and transport properties are studied. Both compounds have an orthorhombic crystal structure. ZrMnP and HfMnP are ferromagnetic with Curie temperatures around 370 K and 320 K, respectively. The spontaneous magnetizations of ZrMnP and HfMnP are determined to be 1.9 μ{sub B}/f.u. and 2.1 μ{sub B}/f.u., respectively, at 50 K. The magnetocaloric effect of ZrMnP in terms of entropy change (ΔS) is estimated to be −6.7 kJ m{sup −3} K{sup −1} around 369 K. The easy axis of magnetization is [100] for both compounds, with a small anisotropy relative to the [010] axis. At 50 K, the anisotropy field along the [001] axis is ∼4.6 T for ZrMnP and ∼10 T for HfMnP. Such large magnetic anisotropy is remarkable considering the absence of rare-earth elements in these compounds. The first principle calculation correctly predicts the magnetization and hard axis orientation for both compounds, and predicts the experimental HfMnP anisotropy field within 25%. More importantly, our calculations suggest that the large magnetic anisotropy comes primarily from the Mn atoms, suggesting that similarly large anisotropies may be found in other 3d transition metal compounds.

Discovery of ferromagnetism with large magnetic anisotropy in ZrMnP and HfMnP

International Nuclear Information System (INIS)

Lamichhane, Tej N.; Taufour, Valentin; Kaluarachchi, Udhara S.; Bud'ko, Sergey L.; Canfield, Paul C.; Masters, Morgan W.; Parker, David S.; Thimmaiah, Srinivasa

2016-01-01

ZrMnP and HfMnP single crystals are grown by a self-flux growth technique, and structural as well as temperature dependent magnetic and transport properties are studied. Both compounds have an orthorhombic crystal structure. ZrMnP and HfMnP are ferromagnetic with Curie temperatures around 370 K and 320 K, respectively. The spontaneous magnetizations of ZrMnP and HfMnP are determined to be 1.9 μ_B/f.u. and 2.1 μ_B/f.u., respectively, at 50 K. The magnetocaloric effect of ZrMnP in terms of entropy change (ΔS) is estimated to be −6.7 kJ m"−"3 K"−"1 around 369 K. The easy axis of magnetization is [100] for both compounds, with a small anisotropy relative to the [010] axis. At 50 K, the anisotropy field along the [001] axis is ∼4.6 T for ZrMnP and ∼10 T for HfMnP. Such large magnetic anisotropy is remarkable considering the absence of rare-earth elements in these compounds. The first principle calculation correctly predicts the magnetization and hard axis orientation for both compounds, and predicts the experimental HfMnP anisotropy field within 25%. More importantly, our calculations suggest that the large magnetic anisotropy comes primarily from the Mn atoms, suggesting that similarly large anisotropies may be found in other 3d transition metal compounds.

Polarized radial magnetic fields and outward plasma fluxes during shallow-reversal discharges in the ZT-40M reversed-field pinch

International Nuclear Information System (INIS)

Jacobson, A.R.; Rusbridge, M.G.; Burkhardt, L.C.

1984-01-01

The characteristics of edge-region electromagnetic disturbances and of pulsed radial fluxes of plasma to the liner as well as the detailed interrelationship among these processes have been studied on the ZT-40M reversed-field pinch in its normal, shallow-reversal operating regime. The dominant magnetic disturbances are spiky (pulsewidth approx.5--10 μs) low-amplitude (Vertical BarB/sub r//B/sub theta/Vertical Bar -2 )= poloidally symmetric radial-field structures intersecting the vacuum wall and precessing toroidally in the anti-I/sub phi/ sense. The effect of even slight toroidal-field reversal (Vertical BarB/sub phi/(a)Vertical Barroughly-equalB/sub theta/(a)/10) is to polarize these radial-field spikes preferentially positive (i.e., B/sub r/>0) and to increase the speed of the minority (B/sub r/ 0) spikes. Synchronous with the polarized B/sub r/ spikes are intense radially outward fluxes of plasma (instantaneously > or approx. =10 22 m -2 s -1 ) leading to recurrent, large amplitude (Vertical BarΔn/n> or approx. =25%) depletion of the density in the outer quarter of minor radius. The resulting time-averaged global loss-rate per particle is significant (approx.10 3 s -1 )

Structurally flexible and solution stable [Ln₄TM₈(OH)₈(L)₈(O₂CR)₈(MeOH)_y](ClO₄)₄

DEFF Research Database (Denmark)

Hooper, Thomas N.; Inglis, Ross; Lorusso, Giulia

2016-01-01

the predominant antiferromagnetic interactions in 2a yield an inverse magnetocaloric effect; that is, the temperature increases on lowering the applied field, under the proper experimental conditions. In spite of increasing the magnetic density by adding ions that bring in antiferromagnetic interactions (2a...... effect evolves by introducing either antiferromagnetic or ferromagnetic interactions, or magnetic anisotropy, by substituting the nonmagnetic ZnII (1a) with CuII (2a), NiII (6a) or CoII (7a), respectively. The largest magnetocaloric effect is found for the ferromagnetically coupled complex 6a, while......) or magnetic anisotropy (7a), the magnetocaloric effect is overall smaller in 2a and 7a than in 1a, where only four GdIII spins per molecule contribute to the magnetocaloric properties....

Making the most of the magnetic and lattice entropy changes

International Nuclear Information System (INIS)

Pecharsky, V.K.; Gschneidner, K.A.; Mudryk, Ya.; Paudyal, Durga

2009-01-01

Recent discoveries of novel materials exhibiting a magnetocaloric effect that is strongly enhanced by the magnetoelastic coupling-the so-called giant magnetocaloric effect materials-stimulated an unprecedented expansion of research related both to the fundamentals of the phenomenon and potential future applications of these materials in continuous magnetic cooling near room temperature. The subject of this work is twofold. On one hand, systems exhibiting the giant magnetocaloric effect may be prone to hysteresis, and may exist in nonequilibrium, phase-separated states, thus requiring a special care when their intrinsic physical properties are of interest. On the other hand, in order to harvest most of the magnetocaloric potential of a specific compound, both the magnetic and lattice degrees of freedom of the material must be precisely controlled.

Large magneto-conductance and magneto-electroluminescence in exciplex-based organic light-emitting diodes at room temperature

Science.gov (United States)

Ling, Yongzhou; Lei, Yanlian; Zhang, Qiaoming; Chen, Lixiang; Song, Qunliang; Xiong, Zuhong

2015-11-01

In this work, we report on large magneto-conductance (MC) over 60% and magneto-electroluminescence (MEL) as high as 112% at room temperature in an exciplex-based organic light-emitting diode (OLED) with efficient reverse intersystem crossing (ISC). The large MC and MEL are individually confirmed by the current density-voltage characteristics and the electroluminescence spectra under various magnetic fields. We proposed that this type of magnetic field effect (MFE) is governed by the field-modulated reverse ISC between the singlet and triplet exciplex. The temperature-dependent MFEs reveal that the small activation energy of reverse ISC accounts for the large MFEs in the present exciplex-based OLEDs.

Overview of the TITAN-II reversed-field pinch aqueous fusion power core design

Energy Technology Data Exchange (ETDEWEB)

Wong, C.P.C.; Creedon, R.L.; Grotz, S.; Cheng, E.T.; Sharafat, S.; Cooke, P.I.H.

1988-03-01

TITAN-II is a compact, high power density Reversed-Field Pinch fusion power reactor design based on the aqueous lithium solution fusion power core concept. The selected breeding and structural materials are LiNO/sub 3/ and 9-C low activation ferritic steel, respectively. TITAN-II is a viable alternative to the TITAN-I lithium self-cooled design for the Reversed-Field Pinch reactor to operate at a neutron wall loading of 18 MWm/sup 2/. Submerging the complete fusion power core and the primary loop in a large pool of cool water will minimize the probability of radioactivity release. Since the protection of the large pool integrity is the only requirement for the protection of the public, TITAN-II is a passive safety assurance design. 13 refs., 3 figs., 1 tab.

Overview of the TITAN-II reversed-field pinch aqueous fusion power core design

Energy Technology Data Exchange (ETDEWEB)

Wong, C.P.C.; Creedon, R.L.; Cheng, E.T. (General Atomic Co., San Diego, CA (USA)); Grotz, S.P.; Sharafat, S.; Cooke, P.I.H. (California Univ., Los Angeles (USA). Dept. of Mechanical, Aerospace and Nuclear Engineering; California Univ., Los Angeles, CA (USA). Inst. for Plasma and Fusion Research); TITAN Research Group

1989-04-01

TITAN-II is a compact, high-power-density Reversed-Field Pinch fusion power reactor design based on the aqueous lithium solution fusion power core concept. The selected breeding and structural materials are LiNO/sub 3/ and 9-C low activation ferritic steel, respectively. TITAN-II is a viable alternative to the TITAN-I lithium self-cooled design for the Reversed-Field Pinch reactor to operate at a neutron wall loading of 18 MW/m/sup 2/. Submerging the complete fusion power core and the primary loop in a large pool of cool water will minimize the probability of radioactivity release. Since the protection of the large pool integrity is the only requirement for the protection of the public, TITAN-II is a level 2 of passive safety assurance design. (orig.).

Nonlinear dynamics of tearing modes in the reversed field pinch

International Nuclear Information System (INIS)

Holmes, J.A.; Carreras, B.A.; Diamond, P.H.; Lynch, V.E.

1987-05-01

The results of investigations of nonlinear tearing-mode dynamics in reversed field pinch plasmas are described. The linear instabilities have poloidal mode number m = 1 and toroidal mode numbers 10 ≤ n ≤ 20, and the resonant surfaces are therefore in the plasma core. The nonlinear dynamics result in dual cascade processes. The first process is a rapid m = 1 spectral broadening toward high n, with a simultaneous spreading of magnetic turbulence radially outward toward the field-reversal surface. Global m = 0 perturbations, which are driven to large amplitudes by the m = 1 instabilities, in turn trigger the m = 1 spectral broadening by back-coupling to the higher n. The second process is a cascade toward large m and is mediated by m = 2 modes. The m = 2 perturbations have the structure of localized, driven current sheets and nonlinearly stabilize the m = 1 modes by transferring m = 1 energy to small-scale dissipation. The calculated spectrum has many of the qualitative features observed in experiments. 13 refs., 21 figs., 1 tab

A Probabilistic Assessment of the Next Geomagnetic Reversal

OpenAIRE

Buffett, B; Davis, W

2018-01-01

©2018. American Geophysical Union. All Rights Reserved. Deterministic forecasts for the next geomagnetic reversal are not feasible due to large uncertainties in the present-day state of the Earth's core. A more practical approach relies on probabilistic assessments using paleomagnetic observations to characterize the amplitude of fluctuations in the geomagnetic dipole. We use paleomagnetic observations for the past 2 Myr to construct a stochastic model for the axial dipole field and apply wel...

Reverse logistics policy – differences between conservative and innovative reverse logistics management

Directory of Open Access Journals (Sweden)

Alena Klapalová

2013-01-01

Full Text Available One of the of the key barriers that hampers effective and efficient management of reverse flows detected within a number of empirical surveys and case studies focused on reverse logistics and/or return management is business (organisational policy, specifically lack of policy, deficiency in existing policy or inferior policy. Despite this fact, there is a gap in literature which would show some evidence from practice that innovative reverse logistics policy both can pay off and is associated with certain aspects of reverse logistics management. Such proof can have several implications. It can support the call for better understanding and more research of the linkages of reverse logistics with other corporate functions, promote the acceptation of strategic character of reverse logistics and stress the role of RL policy within the rest of overall corporate management.The aim of this paper is to contribute and to enrich the existing body of knowledge concerning the above-mentioned gap through presentation of survey results that was realized in 2012 among managers of 244 Czech firms. The results demonstrate the statistically significant association between the innovativeness of RL policy and profitability of firms, quality of RL planning, perception of RL importance, level of RL knowledge and perception of product innovation importance for firms’ competitiveness and frequency of product innovation. They also reveal statistically significant differences between firms with conservative and innovative RL policy and the perceived existence of some barriers to manage RL.

Geomagnetic Field During a Reversal

Science.gov (United States)

Heirtzler, J. R.

2003-01-01

It has frequently been suggested that only the geomagnetic dipole, rather than higher order poles, reverse during a geomagnetic field reversal. Under this assumption the geomagnetic field strength has been calculated for the surface of the Earth for various steps of the reversal process. Even without an eminent a reversal of the field, extrapolation of the present secular change (although problematic) shows that the field strength may become zero in some geographic areas within a few hundred years.

Reversal time of jump-noise magnetization dynamics in nanomagnets via Monte Carlo simulations

Science.gov (United States)

Parthasarathy, Arun; Rakheja, Shaloo

2018-06-01

The jump-noise is a nonhomogeneous Poisson process which models thermal effects in magnetization dynamics, with special applications in low temperature escape rate phenomena. In this work, we develop improved numerical methods for Monte Carlo simulation of the jump-noise dynamics and validate the method by comparing the stationary distribution obtained empirically against the Boltzmann distribution. In accordance with the Néel-Brown theory, the jump-noise dynamics display an exponential relaxation toward equilibrium with a characteristic reversal time, which we extract for nanomagnets with uniaxial and cubic anisotropy. We relate the jump-noise dynamics to the equivalent Landau-Lifshitz dynamics up to second order correction for a general energy landscape and obtain the analogous Néel-Brown theory's solution of the reversal time. We find that the reversal time of jump-noise dynamics is characterized by Néel-Brown theory's solution at the energy saddle point for small noise. For large noise, the magnetization reversal due to jump-noise dynamics phenomenologically represents macroscopic tunneling of magnetization.

Supercritical fluid reverse micelle separation

Science.gov (United States)

Fulton, J.L.; Smith, R.D.

1993-11-30

A method of separating solute material from a polar fluid in a first polar fluid phase is provided. The method comprises combining a polar fluid, a second fluid that is a gas at standard temperature and pressure and has a critical density, and a surfactant. The solute material is dissolved in the polar fluid to define the first polar fluid phase. The combined polar and second fluids, surfactant, and solute material dissolved in the polar fluid is maintained under near critical or supercritical temperature and pressure conditions such that the density of the second fluid exceeds the critical density thereof. In this way, a reverse micelle system defining a reverse micelle solvent is formed which comprises a continuous phase in the second fluid and a plurality of reverse micelles dispersed in the continuous phase. The solute material is dissolved in the polar fluid and is in chemical equilibrium with the reverse micelles. The first polar fluid phase and the continuous phase are immiscible. The reverse micelles each comprise a dynamic aggregate of surfactant molecules surrounding a core of the polar fluid. The reverse micelle solvent has a polar fluid-to-surfactant molar ratio W, which can vary over a range having a maximum ratio W[sub o] that determines the maximum size of the reverse micelles. The maximum ratio W[sub o] of the reverse micelle solvent is then varied, and the solute material from the first polar fluid phase is transported into the reverse micelles in the continuous phase at an extraction efficiency determined by the critical or supercritical conditions. 27 figures.

Cranioplasty prosthesis manufacturing based on reverse engineering technology

Science.gov (United States)

Chrzan, Robert; Urbanik, Andrzej; Karbowski, Krzysztof; Moskała, Marek; Polak, Jarosław; Pyrich, Marek

2012-01-01

Summary Background Most patients with large focal skull bone loss after craniectomy are referred for cranioplasty. Reverse engineering is a technology which creates a computer-aided design (CAD) model of a real structure. Rapid prototyping is a technology which produces physical objects from virtual CAD models. The aim of this study was to assess the clinical usefulness of these technologies in cranioplasty prosthesis manufacturing. Material/Methods CT was performed on 19 patients with focal skull bone loss after craniectomy, using a dedicated protocol. A material model of skull deficit was produced using computer numerical control (CNC) milling, and individually pre-operatively adjusted polypropylene-polyester prosthesis was prepared. In a control group of 20 patients a prosthesis was manually adjusted to each patient by a neurosurgeon during surgery, without using CT-based reverse engineering/rapid prototyping. In each case, the prosthesis was implanted into the patient. The mean operating times in both groups were compared. Results In the group of patients with reverse engineering/rapid prototyping-based cranioplasty, the mean operating time was shorter (120.3 min) compared to that in the control group (136.5 min). The neurosurgeons found the new technology particularly useful in more complicated bone deficits with different curvatures in various planes. Conclusions Reverse engineering and rapid prototyping may reduce the time needed for cranioplasty neurosurgery and improve the prosthesis fitting. Such technologies may utilize data obtained by commonly used spiral CT scanners. The manufacturing of individually adjusted prostheses should be commonly used in patients planned for cranioplasty with synthetic material. PMID:22207125

r-Universal reversible logic gates

International Nuclear Information System (INIS)

Vos, A de; Storme, L

2004-01-01

Reversible logic plays a fundamental role both in ultra-low power electronics and in quantum computing. It is therefore important to know which reversible logic gates can be used as building block for the reversible implementation of an arbitrary boolean function and which cannot

Reversible Shaping of Microwells by Polarized Light Irradiation

Directory of Open Access Journals (Sweden)

Federica Pirani

2017-01-01

Full Text Available In the last years, stimuli-responsive polymeric materials have attracted great interest, due to their low cost and ease of structuration over large areas combined with the possibility to actively manipulate their properties. In this work, we propose a polymeric pattern of soft-imprinted microwells containing azobenzene molecules. The shape of individual elements of the pattern can be controlled after fabrication by irradiation with properly polarized light. By taking advantage of the light responsivity of the azobenzene compound, we demonstrate the possibility to reversibly modulate a contraction-expansion of wells from an initial round shape to very narrow slits. We also show that the initial shape of the microconcavities can be restored by flipping the polarization by 90°. The possibility to reversibly control the final shape of individual elements of structured surfaces offers the opportunity to engineer surface properties dynamically, thus opening new perspectives for several applications.

Introduction to reversible computing

CERN Document Server

Perumalla, Kalyan S

2013-01-01

Few books comprehensively cover the software and programming aspects of reversible computing. Filling this gap, Introduction to Reversible Computing offers an expanded view of the field that includes the traditional energy-motivated hardware viewpoint as well as the emerging application-motivated software approach. Collecting scattered knowledge into one coherent account, the book provides a compendium of both classical and recently developed results on reversible computing. It explores up-and-coming theories, techniques, and tools for the application of rever

A Study on Reverse Logistics

OpenAIRE

Reddy, Dhananjaya

2011-01-01

In the competitive world of manufacturing, companies are often searching for new ways to improve their process, customer satisfaction and stay ahead in the game with their competitors. Reverse logistics has been considered a strategy to bring these things to life for the past decade or so. This thesis work tries to shed some light on the basics of reverse logistics and how reverse logistics can be used as a management strategy. This paper points out the fundamentals of reverse logistics and l...

Effects of large volume injection of aliphatic alcohols as sample diluents on the retention of low hydrophobic solutes in reversed-phase liquid chromatography.

Science.gov (United States)

David, Victor; Galaon, Toma; Aboul-Enein, Hassan Y

2014-01-03

Recent studies showed that injection of large volume of hydrophobic solvents used as sample diluents could be applied in reversed-phase liquid chromatography (RP-LC). This study reports a systematic research focused on the influence of a series of aliphatic alcohols (from methanol to 1-octanol) on the retention process in RP-LC, when large volumes of sample are injected on the column. Several model analytes with low hydrophobic character were studied by RP-LC process, for mobile phases containing methanol or acetonitrile as organic modifiers in different proportions with aqueous component. It was found that starting with 1-butanol, the aliphatic alcohols can be used as sample solvents and they can be injected in high volumes, but they may influence the retention factor and peak shape of the dissolved solutes. The dependence of the retention factor of the studied analytes on the injection volume of these alcohols is linear, with a decrease of its value as the sample volume is increased. The retention process in case of injecting up to 200μL of upper alcohols is dependent also on the content of the organic modifier (methanol or acetonitrile) in mobile phase. Copyright © 2013 Elsevier B.V. All rights reserved.

The reversal of agricultural reform in Uganda: ownership and values

DEFF Research Database (Denmark)

Kjær, Anne Mette; Joughin, James

2012-01-01

. In essence, the agricultural reform programme represented market-oriented values that were not echoed in large parts of the Ugandan polity. The eventual reversal of policy, back to government-provided extension, and to a large programme of heavily subsidised input supply, testifies to that. In addition, key...... stakeholders, notably local politicians and officials in the Ministry of Agriculture, Animal Industry, and Fisheries (MAAIF), were shut out from the original programme and this threatened its viability. If a genuine analysis of the economic and political context had been carried out, the donors might have...

Optimized reversible binary-coded decimal adders

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal; Glück, Robert

2008-01-01

Abstract Babu and Chowdhury [H.M.H. Babu, A.R. Chowdhury, Design of a compact reversible binary coded decimal adder circuit, Journal of Systems Architecture 52 (5) (2006) 272-282] recently proposed, in this journal, a reversible adder for binary-coded decimals. This paper corrects and optimizes...... their design. The optimized 1-decimal BCD full-adder, a 13 × 13 reversible logic circuit, is faster, and has lower circuit cost and less garbage bits. It can be used to build a fast reversible m-decimal BCD full-adder that has a delay of only m + 17 low-power reversible CMOS gates. For a 32-decimal (128-bit....... Keywords: Reversible logic circuit; Full-adder; Half-adder; Parallel adder; Binary-coded decimal; Application of reversible logic synthesis...

When gains loom larger than losses: reversed loss aversion for small amounts of money.

Science.gov (United States)

Harinck, Fieke; Van Dijk, Eric; Van Beest, Ilja; Mersmann, Paul

2007-12-01

Previous research has generally shown that people are loss averse; that is, they weigh losses more heavily than gains. In a series of three experiments, we found that for small outcomes, this pattern is reversed, and gains loom larger than losses. We explain this reversal on the basis of (a) the hedonic principle, which states that individuals are motivated to maximize pleasure and to minimize pain, and (b) the assumption that small losses are more easily discounted cognitively than large losses are.

Desalination of brackish mine waters by reverse osmosis

Energy Technology Data Exchange (ETDEWEB)

Kepinski, J; Lipinski, K; Chlubek, N; Delyannis, A; Delyannis, E [eds.

1976-01-01

The situation concerning the pollution, by excessive salinity, of the main rivers in Poland is analyzed. The significant contribution of saline coal mine waters is evaluated, with emphasis on large quantities of brackish water in new coal mines. The results are given of preliminary experiments undertaken in order to elaborate the suitable technology. Pretreatment, concentration by reverse osmosis and disinfection of the permeate are the proposed steps. The concentrate as obtained is suitable for further utilization by evaporation.

Barriers and Prospects for Reverse Logistics as Regards oil Lube and its Packaging

Directory of Open Access Journals (Sweden)

Luis Alfredo Sencovici

2015-08-01

Full Text Available This article aims to discuss the main challenges and prospects for the implementation of reverse logistics to lube oil and its packaging. The methodology focuses on conducting in-depth interviews with representatives of these products’ chains, and the results show that technological advances now allow for the generation of re-refined oil with better economic and environmental features than crude oil, and there have been noticeable advances as to packaging too. However, issues such as conflicts in the reverse chain as to the distribution costs of collection, lack of regional solutions to recycling activities, poor supervision, lack of tax incentives and manufacturers’ low interest in modify their products and processes emphasis on prevention challenge the expansion of large-scale reverse logistics activity in the country.

What do reversible programs compute?

DEFF Research Database (Denmark)

Axelsen, Holger Bock; Glück, Robert

2011-01-01

Reversible computing is the study of computation models that exhibit both forward and backward determinism. Understanding the fundamental properties of such models is not only relevant for reversible programming, but has also been found important in other fields, e.g., bidirectional model...... transformation, program transformations such as inversion, and general static prediction of program properties. Historically, work on reversible computing has focussed on reversible simulations of irreversible computations. Here, we take the viewpoint that the property of reversibility itself should...... are not strictly classically universal, but that they support another notion of universality; we call this RTM-universality. Thus, even though the RTMs are sub-universal in the classical sense, they are powerful enough as to include a self-interpreter. Lifting this to other computation models, we propose r...

Fundamentals of reversible flowchart languages

DEFF Research Database (Denmark)

Yokoyama, Tetsuo; Axelsen, Holger Bock; Glück, Robert

2016-01-01

Abstract This paper presents the fundamentals of reversible flowcharts. They are intended to naturally represent the structure and control flow of reversible (imperative) programming languages in a simple computation model, in the same way classical flowcharts do for conventional languages......, structured reversible flowcharts are as expressive as unstructured ones, as shown by a reversible version of the classic Structured Program Theorem. We illustrate how reversible flowcharts can be concretized with two example programming languages, complete with syntax and semantics: a low-level unstructured...... language and a high-level structured language. We introduce concrete tools such as program inverters and translators for both languages, which follow the structure suggested by the flowchart model. To further illustrate the different concepts and tools brought together in this paper, we present two major...

Thermal expansion of the magnetorefrigerant Gd5(Si,Ge)4

NARCIS (Netherlands)

Brück, E.H.; Nazih, M.; de Visser, A.; Zhang, L.; Tegus, O.

2003-01-01

We report thermal expansion measurements carried out on a single-crystal of the giant magnetocaloric effect material Gd5(Si0.43Ge0.57)4. At the magneto-structural phase transition at T0~240 K, large steps in the relative length change ÄL/L along the principle crystallographic axes are observed. The

Magnetic reversals from planetary dynamo waves

DEFF Research Database (Denmark)

Sheyko, Andrey; Finlay, Chris; Jackson, Andrew

2016-01-01

A striking feature of many natural dynamos is their ability to undergo polarity reversals. The best documented example is Earth's magnetic field, which has reversed hundreds of times during its history. The origin of geomagnetic polarity reversals lies in a magnetohydrodynamic process that takes ...... to kinematic dynamo waves. Because our results are relevant in a regime of low viscosity and high magnetic diffusivity, and with geophysically appropriate boundary conditions, this form of dynamo wave may also be involved in geomagnetic reversals.......A striking feature of many natural dynamos is their ability to undergo polarity reversals. The best documented example is Earth's magnetic field, which has reversed hundreds of times during its history. The origin of geomagnetic polarity reversals lies in a magnetohydrodynamic process that takes...... place in Earth's core, but the precise mechanism is debated. The majority of numerical geodynamo simulations that exhibit reversals operate in a regime in which the viscosity of the fluid remains important, and in which the dynamo mechanism primarily involves stretching and twisting of field lines...

Reversibility and switching options values in the geological disposal of radioactive waste

International Nuclear Information System (INIS)

Ionescu, Oana; Spaeter, Sandrine

2011-07-01

This article offers some economic insights for the debate on the reversible geological disposal of radioactive waste. Irreversibility due to large sunk costs, an important degree of flexibility and several sources of uncertainty are taken into account in the decision process relative to the radioactive waste disposal. We draw up a stochastic model in a continuous time framework to study the decision problem of a reversible repository project for the radioactive waste, with multiple disposal stages. We consider that the value of reversibility, related to the radioactive waste packages, is jointly affected by economic and technological uncertainty. These uncertainties are modeled, first, by a 2-Dimensional Geometric Brownian Motion, and, second, by a Geometric Brownian Motion with a Poisson jump process. A numerical analysis and a sensitivity study of various parameters are also proposed. Switching options values in the geological disposal of radioactive waste. (authors)

A functional language for describing reversible logic

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal

2012-01-01

Reversible logic is a computational model where all gates are logically reversible and combined in circuits such that no values are lost or duplicated. This paper presents a novel functional language that is designed to describe only reversible logic circuits. The language includes high....... Reversibility of descriptions is guaranteed with a type system based on linear types. The language is applied to three examples of reversible computations (ALU, linear cosine transformation, and binary adder). The paper also outlines a design flow that ensures garbage- free translation to reversible logic...... circuits. The flow relies on a reversible combinator language as an intermediate language....

Geomagnetic Reversals during the Phanerozoic.

Science.gov (United States)

McElhinny, M W

1971-04-09

An antalysis of worldwide paleomagnetic measurements suggests a periodicity of 350 x 10(6) years in the polarity of the geomagnetic field. During the Mesozoic it is predominantly normal, whereas during the Upper Paleozoic it is predominantly reversed. Although geomagnetic reversals occur at different rates throughout the Phanerozoic, there appeaars to be no clear correlation between biological evolutionary rates and reversal frequency.

Resveratrol reverses morphine-induced neuroinflammation in morphine-tolerant rats by reversal HDAC1 expression

Directory of Open Access Journals (Sweden)

Ru-Yin Tsai

2016-06-01

Conclusion: Resveratrol restores the antinociceptive effect of morphine by reversing morphine infusion-induced spinal cord neuroinflammation and increase in TNFR1 expression. The reversal of the morphine-induced increase in TNFR1 expression by resveratrol is partially due to reversal of the morphine infusion-induced increase in HDAC1 expression. Resveratrol pretreatment can be used as an adjuvant in clinical pain management for patients who need long-term morphine treatment or with neuropathic pain.

Composite (La0.45Nd0.25)Sr0.3MnO3/5CuO materials for magnetic refrigeration applications

Science.gov (United States)

El Maalam, K.; Balli, M.; Habouti, S.; Dietze, M.; Hamedoun, M.; Hlil, E.-K.; Es-Souni, M.; El Kenz, A.; Benyoussef, A.; Mounkachi, O.

2018-03-01

In this work, the magnetocaloric properties of (La0.45Nd0.25)Sr0.3MnO3 (LNSMO)-based composites are studied. The structural, microstructural, magnetic and magnetocaloric properties of LNSMO and LNSMO/5CuO samples were investigated aiming to particularly clarify the secondary phase (CuO) role in driving the magnetocaloric behavior. The main phase LNSMO crystallizes in a rhombohedral R-3C (1 6 7) configuration. The XRD patterns of composite samples show both perovskite LNSMO and monoclinic Tenorite CuO structures. The microstructural analysis unveils that the CuO phase is mainly present in the grain boundaries and segregates region. On the other hand, it was found that the magnetocaloric effect could be significantly enhanced by adding a small amount of CuO (5% weight ratio). For a magnetic field changing from 0 to 1.5 T, the corresponding isothermal entropy change was found to be 2.55 J/kg K for the LNSMO/5CuO composite while it is only about 1.1 J/kg K for the mother material LNSMO. Our finding should inspire and open new ways for the enhancement of the magnetocaloric effect in manganites-based materials.

Reversal of hepatorenal syndrome type 1 with terlipressin plus albumin vs. placebo plus albumin in a pooled analysis of the OT-0401 and REVERSE randomised clinical studies.

Science.gov (United States)

Sanyal, A J; Boyer, T D; Frederick, R T; Wong, F; Rossaro, L; Araya, V; Vargas, H E; Reddy, K R; Pappas, S C; Teuber, P; Escalante, S; Jamil, K

2017-06-01

The goal of hepatorenal syndrome type 1 (HRS-1) treatment is to improve renal function. Terlipressin, a synthetic vasopressin analogue, is a systemic vasoconstrictor used for the treatment of HRS-1, where it is available. To compare the efficacy of terlipressin plus albumin vs. placebo plus albumin in patients with HRS-1. Pooled patient-level data from two large phase 3, randomised, placebo-controlled studies were analysed for HRS reversal [serum creatinine (SCr) value ≤133 μmol/L], 90-day survival, need for renal replacement therapy and predictors of HRS reversal. Patients received intravenous terlipressin 1-2 mg every 6 hours plus albumin or placebo plus albumin up to 14 days. The pooled analysis comprised 308 patients (terlipressin: n = 153; placebo: n = 155). HRS reversal was significantly more frequent with terlipressin vs. placebo (27% vs. 14%; P = 0.004). Terlipressin was associated with a more significant improvement in renal function from baseline until end of treatment, with a mean between-group difference in SCr concentration of -53.0 μmol/L (P albumin resulted in a significantly higher rate of HRS reversal vs. albumin alone in patients with HRS-1. Terlipressin treatment is associated with improved renal function. (ClinicalTrials.gov identifier: OT-0401, NCT00089570; REVERSE, NCT01143246). © 2017 The Authors. Alimentary Pharmacology and Therapeutics published by John Wiley & Sons Ltd.

Reverse engineering validation using a benchmark synthetic gene circuit in human cells.

Science.gov (United States)

Kang, Taek; White, Jacob T; Xie, Zhen; Benenson, Yaakov; Sontag, Eduardo; Bleris, Leonidas

2013-05-17

Multicomponent biological networks are often understood incompletely, in large part due to the lack of reliable and robust methodologies for network reverse engineering and characterization. As a consequence, developing automated and rigorously validated methodologies for unraveling the complexity of biomolecular networks in human cells remains a central challenge to life scientists and engineers. Today, when it comes to experimental and analytical requirements, there exists a great deal of diversity in reverse engineering methods, which renders the independent validation and comparison of their predictive capabilities difficult. In this work we introduce an experimental platform customized for the development and verification of reverse engineering and pathway characterization algorithms in mammalian cells. Specifically, we stably integrate a synthetic gene network in human kidney cells and use it as a benchmark for validating reverse engineering methodologies. The network, which is orthogonal to endogenous cellular signaling, contains a small set of regulatory interactions that can be used to quantify the reconstruction performance. By performing successive perturbations to each modular component of the network and comparing protein and RNA measurements, we study the conditions under which we can reliably reconstruct the causal relationships of the integrated synthetic network.

Magnetocaloric effect and negative thermal expansion in hexagonal Fe doped MnNiGe compounds with a magnetoelastic AFM-FM-like transition.

Science.gov (United States)

Xu, Kun; Li, Zhe; Liu, Enke; Zhou, Haichun; Zhang, Yuanlei; Jing, Chao

2017-01-30

We report a detailed study of two successive first-order transitions, including a martensitic transition (MT) and an antiferromagnetic (AFM)-ferromagnetic (FM)-like transition, in Mn 1-x Fe x NiGe (x = 0, 0.06, 0.11) alloys by X-ray diffraction, differential scanning calorimetry, magnetization and linear thermal expansion measurements. Such an AFM-FM-like transition occurring in the martensitic state has seldom been observed in the M(T) curves. The results of Arrott plot and linear relationship of the critical temperature with M 2 provide explicit evidence of its first-order magnetoelastic nature. On the other hand, their performances as magnetocaloric and negative thermal expansion materials were characterized. The isothermal entropy change for a field change of 30 kOe reaches an impressive value of -25.8 J/kg K at 203 K for x = 0.11 compared to the other two samples. It demonstrates that the magneto-responsive ability has been significantly promoted since an appropriate amount of Fe doping can break the local Ni-6Mn AFM configuration. Moreover, the Fe-doped samples reveal both the giant negative thermal expansion and near-zero thermal expansion for different temperature ranges. For instance, the average thermal expansion coefficient ā of x = 0.06 reaches -60.7 × 10 -6 /K over T = 231-338 K and 0.6 × 10 -6 /K over T = 175-231 K during cooling.

A structural, magnetic and Moessbauer spectral study of the magnetocaloric Mn1.1Fe0.9P1-xGex compounds

International Nuclear Information System (INIS)

Sougrati, Moulay T; Hermann, Raphael P; Grandjean, Fernande; Long, Gary J; Brueck, E; Tegus, O; Trung, N T; Buschow, K H J

2008-01-01

The structural, magnetic and Moessbauer spectral properties of the magnetocaloric Mn 1.1 Fe 0.9 P 1-x Ge x compounds, with 0.19 1.1 Fe 0.9 P 0.74 Ge 0.26 . The temperature dependence of the magnetization reveals a ferromagnetic to paramagnetic transition with a Curie temperature between approximately 250 and 330 K and hysteresis width of 10 to 4 K, for 0.19 1.1 Fe 0.9 P 0.78 Ge 0.22 shows the largest isothermal entropy change of approximately 10 J/(kgKT) at 290 K. The Moessbauer spectra have been analysed with a binomial distribution of hyperfine fields correlated with a change in isomer shift and quadrupole shift, a distribution that results from the distribution of phosphorus and germanium among the near neighbours of the iron. The coexistence of paramagnetic and magnetically ordered phases in ranges of temperature of up to 50 K around the Curie temperature is observed in the Moessbauer spectra and is associated with the first-order character of the ferromagnetic to paramagnetic transition. The temperature dependence of the weighted average hyperfine field is well fitted within the magnetostrictive model of Bean and Rodbell. Good fits of the Moessbauer spectra could only be achieved by introducing a difference between the isomer shifts in the paramagnetic and ferromagnetic phases, a difference that is related to the magnetostriction and electronic structure change.

Principles of a reversible programming language

DEFF Research Database (Denmark)

Yokoyama, Tetsuo; Axelsen, Holger Bock; Glück, Robert

2008-01-01

The principles of reversible programming languages are explicated and illustrated with reference to the design of a high-level imperative language, Janus. The fundamental properties for such languages include backward as well as forward determinism and reversible updates of data. The unique design...... languages, and demonstrate this for Janus. We show the practicality of the language by implementation of a reversible fast Fourier transform. Our results indicate that the reversible programming paradigm has fundamental properties that are relevant to many different areas of computer science....... features of the language include explicit post-condition assertions, direct access to an inverse semantics and the possibility of clean (i.e., garbage-free) computation of injective functions. We suggest the clean simulation of reversible Turing machines as a criterion for computing strength of reversible...

Non-monotonic probability of thermal reversal in thin-film biaxial nanomagnets with small energy barriers

Directory of Open Access Journals (Sweden)

N. Kani

2017-05-01

Full Text Available The goal of this paper is to investigate the short time-scale, thermally-induced probability of magnetization reversal for an biaxial nanomagnet that is characterized with a biaxial magnetic anisotropy. For the first time, we clearly show that for a given energy barrier of the nanomagnet, the magnetization reversal probability of an biaxial nanomagnet exhibits a non-monotonic dependence on its saturation magnetization. Specifically, there are two reasons for this non-monotonic behavior in rectangular thin-film nanomagnets that have a large perpendicular magnetic anisotropy. First, a large perpendicular anisotropy lowers the precessional period of the magnetization making it more likely to precess across the x^=0 plane if the magnetization energy exceeds the energy barrier. Second, the thermal-field torque at a particular energy increases as the magnitude of the perpendicular anisotropy increases during the magnetization precession. This non-monotonic behavior is most noticeable when analyzing the magnetization reversals on time-scales up to several tens of ns. In light of the several proposals of spintronic devices that require data retention on time-scales up to 10’s of ns, understanding the probability of magnetization reversal on the short time-scales is important. As such, the results presented in this paper will be helpful in quantifying the reliability and noise sensitivity of spintronic devices in which thermal noise is inevitably present.

‘Picking People to Hate’: Reversible reversals in stand-up comedy

DEFF Research Database (Denmark)

Keisalo, Marianna Päivikki

2017-01-01

Generally speaking, ritual reversals mean switching to the opposite of what is considered ‘the normal order’. Such reversals can occur, for example, in terms of social hierarchies in rites of passage, in action in carnival, or in the framing of action as ritual or performance. For comedic figures...... cultural grounds and show how the study of comedic performance can offer insights into the semiotics of performance more broadly....

Tough Self-Healing Elastomers by Molecular Enforced Integration of Covalent and Reversible Networks.

Science.gov (United States)

Wu, Jinrong; Cai, Li-Heng; Weitz, David A

2017-10-01

Self-healing polymers crosslinked by solely reversible bonds are intrinsically weaker than common covalently crosslinked networks. Introducing covalent crosslinks into a reversible network would improve mechanical strength. It is challenging, however, to apply this concept to "dry" elastomers, largely because reversible crosslinks such as hydrogen bonds are often polar motifs, whereas covalent crosslinks are nonpolar motifs. These two types of bonds are intrinsically immiscible without cosolvents. Here, we design and fabricate a hybrid polymer network by crosslinking randomly branched polymers carrying motifs that can form both reversible hydrogen bonds and permanent covalent crosslinks. The randomly branched polymer links such two types of bonds and forces them to mix on the molecular level without cosolvents. This enables a hybrid "dry" elastomer that is very tough with fracture energy 13500 Jm -2 comparable to that of natural rubber. Moreover, the elastomer can self-heal at room temperature with a recovered tensile strength 4 MPa, which is 30% of its original value, yet comparable to the pristine strength of existing self-healing polymers. The concept of forcing covalent and reversible bonds to mix at molecular scale to create a homogenous network is quite general and should enable development of tough, self-healing polymers of practical usage. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Periodicity and Immortality in Reversible Computing

OpenAIRE

Kari , Jarkko; Ollinger , Nicolas

2008-01-01

Additional material available on the web at http://www.lif.univ-mrs.fr/~nollinge/rec/gnirut/; We investigate the decidability of the periodicity and the immortality problems in three models of reversible computation: reversible counter machines, reversible Turing machines and reversible one-dimensional cellular automata. Immortality and periodicity are properties that describe the behavior of the model starting from arbitrary initial configurations: immortality is the property of having at le...

How decision reversibility affects motivation.

Science.gov (United States)

Bullens, Lottie; van Harreveld, Frenk; Förster, Jens; Higgins, Tory E

2014-04-01

The present research examined how decision reversibility can affect motivation. On the basis of extant findings, it was suggested that 1 way it could affect motivation would be to strengthen different regulatory foci, with reversible decision making, compared to irreversible decision making, strengthening prevention-related motivation relatively more than promotion-related motivation. If so, then decision reversibility should have effects associated with the relative differences between prevention and promotion motivation. In 5 studies, we manipulated the reversibility of a decision and used different indicators of regulatory focus motivation to test these predictions. Specifically, Study 1 tested for differences in participants' preference for approach versus avoidance strategies toward a desired end state. In Study 2, we used speed and accuracy performance as indicators of participants' regulatory motivation, and in Study 3, we measured global versus local reaction time performance. In Study 4, we approached the research question in a different way, making use of the value-from-fit hypothesis (Higgins, 2000, 2002). We tested whether a fit between chronic regulatory focus and focus induced by the reversibility of the decision increased participants' subjective positive feelings about the decision outcome. Finally, in Study 5, we tested whether regulatory motivation, induced by decision reversibility, also influenced participants' preference in specific product features. The results generally support our hypothesis showing that, compared to irreversible decisions, reversible decisions strengthen a prevention focus more than a promotion focus. Implications for research on decision making are discussed.

Probing the energy barriers and magnetization reversal processes of nanoperforated membrane based percolated media

International Nuclear Information System (INIS)

Neu, V; Schultz, L; Schulze, C; Makarov, D; Albrecht, M; Faustini, M; Grosso, D; Lee, J; Kim, S-K; Suess, D

2013-01-01

Magnetization reversal processes in Co/Pt multilayers prepared on nanoperforated templates are probed by magnetization relaxation measurements. The signature of pinning controlled domain wall movement as expected for percolated media is identified. This contrasts with the nucleation-type reversal mechanism of a Co/Pt reference film prepared on a smooth substrate. A zero field energy barrier of 93k B T is determined by fluctuation field measurements and is elucidated by micromagnetic calculations using the nudged elastic band method. This value is sufficiently large to qualify the material as a promising percolated medium. (paper)

MODELS OF PROJECT REVERSE ENGINEERING

Directory of Open Access Journals (Sweden)

Віктор Володимирович ІВАНОВ

2017-03-01

Full Text Available Reverse engineering decided important scientific and technical problems of increasing the cost of the existing technical product by transforming it into a product with other features or design. Search ideas of the new application of existing products on the base of heuristic analysis were created. The concept of reverse engineering and its division into three types: conceptual, aggregate and complete was expanded. The use of heuristic methods for reverse engineering concept was showed. The modification model of Reverse engineering based on the model of РМВОК was developed. Our model includes two new phases: identification and transformation. At the identification phase, technical control is made. At the transformation phase, search heuristic idea of the new applied existing technical product was made. The model of execution phase that included heuristic methods, metrological equipment, and CAD/CAM/CAE program complex was created. The model that connected economic indicators of reverse engineering project was developed.

Manipulation of the magnetic properties in Er{sub 1−x}Co{sub 2} compounds by atomic vacancies

Energy Technology Data Exchange (ETDEWEB)

Zou, Jun-Ding, E-mail: zoujd@zju.edu.cn [School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Key Laboratory of Novel Materials for Information Technology of Zhejiang Province, Zhejiang University, Hangzhou, Zhejiang 310027 (China); Yan, Mi, E-mail: mse_yanmi@zju.edu.cn [School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Key Laboratory of Novel Materials for Information Technology of Zhejiang Province, Zhejiang University, Hangzhou, Zhejiang 310027 (China); Yao, Jin-Lei [Research Center for Solid State Physics and Materials, School of Mathematics and Physics, Suzhou University of Science and Technology, Suzhou 215009 (China)

2015-05-25

Highlights: • The nonstoichiometric Er{sub 1−x}Co{sub 2} compounds are identified. • Er atomic vacancies lead to the volume contracting by 0.37% and enhance T{sub C} by 44%. • The anomalous susceptibility behavior is not exact the same with the Griffiths phase. • The refrigerant capacity of Er{sub 0.97}Co{sub 2} increases from 152 J/kg to 158 J/kg. - Abstract: ErCo{sub 2} compound is a well-known magnetocaloric material which shows giant magnetocaloric effect in the vicinity of first-order phase transition. We demonstrate a new way of fine tuning its crystal structure and magnetic properties. Er atomic vacancies are introduced in order to manipulate the local atomic environment, the phase transition characteristics, and the magnetocaloric effect as well. Er{sub 1−x}Co{sub 2} can be stable over a narrow homogenous range, and maintain the cubic structure. The Bragg peaks shift upward to higher angles, and the unit cell volume contracts with reduction of the Er content. The Curie temperatures in low magnetic field increase from 32 K (ErCo{sub 2}) to 46 K (Er{sub 0.97}Co{sub 2}), and linearly change with the magnetic field in nearly same slope. Er{sub 1−x}Co{sub 2} compounds exhibit anomalous susceptibility behaviors in the paramagnetic state, and deviate from the Curie–Weiss law at around 100 K. The temperature range of anomalous susceptibility behaviors also move upward to higher temperature with reduction of Er content. Er{sub 1−x}Co{sub 2} compounds also show anomalous coercivity behavior in the vicinity of phase transition. Er{sub 1−x}Co{sub 2} compounds exhibit large magnetocaloric effect and good refrigerant capacity in the vicinity of ferrimagnetic–paramagnetic phase transition.

Garbage collection for reversible functional languages

DEFF Research Database (Denmark)

Mogensen, Torben Ægidius

2015-01-01

Reversible languages are programming languages where all programs can run both forwards and backwards. Reversible functional languages have been proposed that use symmetric pattern matching and data construction. To be reversible, these languages require linearity: Every variable must be used...

Can Career-Minded Young Women Reverse Gender Discrimination?

OpenAIRE

Alice W Clark; T V Sekher

2007-01-01

A Partial reversal of the culture of female devaluation is currently emerging among young women from the urban middle class employed in India’s high-tech sector. India has a very large middle class – estimated as more than 200 million – making it a significant and crucial segment that can act as a harbinger for social change. Studies on employment in the IT sector in India have not adequately considered the important social impacts of this new development on the culture of daughter devaluatio...

Cross flow filtration for radwaste applications reverse osmosis demonstration case studies

International Nuclear Information System (INIS)

Malkmus, D.

1995-01-01

Today's radwaste economic and regulatory scenarios signify the importance in the improvement of operational practices to reduce generator liabilities. This action is largely due to the rising cost dealing with burial sites and the imposed waste volume restriction. To control the economical burdens associated with waste burial and to comply with stricter environmental regulations, NPP's are attempting to modify their radwaste system(s) design and operating philosophy by placing a major emphasis on waste volume reduction and processing techniques. The utilization of reverse osmosis technology as a means for treatment of process and wastewater streams in the nuclear power industry has been investigated for many years. This paper will outline reverse osmosis theory and highlight performance data for process and waste stream purification applications. Case studies performed at 5 nuclear plants have been outlined. The demonstrations were performed on a widely variety of process stream for both a PWR and BWR application. The data provided by the pilot systems, the equipment design, and the economical impact a reverse osmosis unit will have on producing treated (high purity) are as follows

Isothermal chemical denaturation of large proteins: Path-dependence and irreversibility.

Science.gov (United States)

Wafer, Lucas; Kloczewiak, Marek; Polleck, Sharon M; Luo, Yin

2017-12-15

State functions (e.g., ΔG) are path independent and quantitatively describe the equilibrium states of a thermodynamic system. Isothermal chemical denaturation (ICD) is often used to extrapolate state function parameters for protein unfolding in native buffer conditions. The approach is prudent when the unfolding/refolding processes are path independent and reversible, but may lead to erroneous results if the processes are not reversible. The reversibility was demonstrated in several early studies for smaller proteins, but was assumed in some reports for large proteins with complex structures. In this work, the unfolding/refolding of several proteins were systematically studied using an automated ICD instrument. It is shown that: (i) the apparent unfolding mechanism and conformational stability of large proteins can be denaturant-dependent, (ii) equilibration times for large proteins are non-trivial and may introduce significant error into calculations of ΔG, (iii) fluorescence emission spectroscopy may not correspond to other methods, such as circular dichroism, when used to measure protein unfolding, and (iv) irreversible unfolding and hysteresis can occur in the absence of aggregation. These results suggest that thorough confirmation of the state functions by, for example, performing refolding experiments or using additional denaturants, is needed when quantitatively studying the thermodynamics of protein unfolding using ICD. Copyright © 2017 Elsevier Inc. All rights reserved.

END-OF-USE PRODUCTS IN REVERSE LOGISTICS

OpenAIRE

Marta Starostka-Patyk

2007-01-01

Reverse logistics is a very useful tool for enterprises which have to deal with end-of-use products. Forward logistics is not able to manage them, because they show up on the beginning of reverse supply chain. That is the reason for growing importance of reverse flows. Reverse logistics is quite new logistics system. This paper presents the idea of reverse logistics and end-of-use products problems.

Reversals in the six-jet Geodynamo model

Directory of Open Access Journals (Sweden)

Vodinchar Gleb

2016-01-01

Full Text Available We describe a large-scale geodynamo model based on hypothesis about 6-cells convection in the Earth’s core. This hypothesis suggests indirect data of inhomogeneities in the density of the Earth?s core. The convection pattern is associated with a spherical harmonic Y24 which defines the basic poloidal component of velocity. The model takes into account the feedback effect of the magnetic field on convection. It was ascertained that the model contains stable regimes of field generation with reversals. The velocity of convection and the dipole component of the magnetic field are similar to the observed ones.

Appreciation of acai core of a pulp producer from Ananindeua/PA: proposal of reverse channel structure oriented by NPSW and reverse logistics

Directory of Open Access Journals (Sweden)

Ana Victoria da Costa Almeida

2017-09-01

Full Text Available The intensification of production and growth of consumption leads to generation of large amounts of waste, which is subsequently disposed of inappropriately, further polluting the environment. Within this context, the National Policy of Solid Waste (NPSW, through Reverse Logistics (RL, aims to maximize the use of resources by the sustainable production and rehabilitation of waste in production cycles. Acai, a valued-consumption commodity in domestic and international markets, is an example of a product whose potential has been underused. This article aims to enact these concepts on a producer from Para by the recycling of lump and consequent rationalization of the use of the product. A reverse channel structure was proposed, involving the phases of collection, screening, processing and disposal based on Fleishmann et al.’s model (2000, and other similar chain ractices, NPSW guidelines and additional influential factors on its construction based on Leite (1999. The results demonstrated the facilitators points and barriers faced by the producers.

Insulating phase in Sr{sub 2}IrO{sub 4}: An investigation using critical analysis and magnetocaloric effect

Energy Technology Data Exchange (ETDEWEB)

Bhatti, Imtiaz Noor; Pramanik, A.K., E-mail: akpramanik@mail.jnu.ac.in

2017-01-15

The nature of insulating phase in 5d based Sr{sub 2}IrO{sub 4} is quite debated as the theoretical as well as experimental investigations have put forward evidences in favor of both magnetically driven Slater-type and interaction driven Mott-type insulator. To understand this insulating behavior, we have investigated the nature of magnetic state in Sr{sub 2}IrO{sub 4} through studying critical exponents, low temperature thermal demagnetization and magnetocaloric effect. The estimated critical exponents do not exactly match with any universality class, however, the values obey the scaling behavior. The exponent values suggest that spin interaction in present material is close to mean-field model. The analysis of low temperature thermal demagnetization data, however, shows dual presence of localized- and itinerant-type of magnetic interaction. Moreover, field dependent change in magnetic entropy indicates magnetic interaction is close to mean-field type. While this material shows an insulating behavior across the magnetic transition, yet a distinct change in slope in resistivity is observed around T{sub c}. We infer that though the insulating phase in Sr{sub 2}IrO{sub 4} is more close to be Slater-type but the simultaneous presence of both Slater- and Mott-type is the likely scenario for this material. - Highlights: • Critical analysis shows Sr{sub 2}IrO{sub 4} has ferromagnetic ordering temperature T{sub c}~225 K. • Obtained critical exponents imply spin interaction is close to mean-field model. • Analysis of magneto-entropy data also supports mean-field type interaction. • However, the presence of both itinerant and localized spin interaction is evident. • Sr{sub 2}IrO{sub 4} has simultaneous presence of both Slater- and Mott-type insulating phase.

Magnetic reversals from planetary dynamo waves.

Science.gov (United States)

Sheyko, Andrey; Finlay, Christopher C; Jackson, Andrew

2016-11-24

A striking feature of many natural dynamos is their ability to undergo polarity reversals. The best documented example is Earth's magnetic field, which has reversed hundreds of times during its history. The origin of geomagnetic polarity reversals lies in a magnetohydrodynamic process that takes place in Earth's core, but the precise mechanism is debated. The majority of numerical geodynamo simulations that exhibit reversals operate in a regime in which the viscosity of the fluid remains important, and in which the dynamo mechanism primarily involves stretching and twisting of field lines by columnar convection. Here we present an example of another class of reversing-geodynamo model, which operates in a regime of comparatively low viscosity and high magnetic diffusivity. This class does not fit into the paradigm of reversal regimes that are dictated by the value of the local Rossby number (the ratio of advection to Coriolis force). Instead, stretching of the magnetic field by a strong shear in the east-west flow near the imaginary cylinder just touching the inner core and parallel to the axis of rotation is crucial to the reversal mechanism in our models, which involves a process akin to kinematic dynamo waves. Because our results are relevant in a regime of low viscosity and high magnetic diffusivity, and with geophysically appropriate boundary conditions, this form of dynamo wave may also be involved in geomagnetic reversals.

Multiple reversal olfactory learning in honeybees

Directory of Open Access Journals (Sweden)

Theo Mota

2010-07-01

Full Text Available In multiple reversal learning, animals trained to discriminate a reinforced from a non-reinforced stimulus are subjected to various, successive reversals of stimulus contingencies (e.g. A+ vs. B-, A- vs. B+, A+ vs. B-. This protocol is useful to determine whether or not animals learn to learn and solve successive discriminations faster (or with fewer errors with increasing reversal experience. Here we used the olfactory conditioning of proboscis extension reflex to study how honeybees Apis mellifera perform in a multiple reversal task. Our experiment contemplated four consecutive differential conditioning phases involving the same odors (A+ vs. B- to A- vs. B+ to A+ vs. B- to A- vs. B+. We show that bees in which the weight of reinforced or non-reinforced stimuli was similar mastered the multiple olfactory reversals. Bees which failed the task exhibited asymmetric responses to reinforced and non-reinforced stimuli, thus being unable to rapidly reverse stimulus contingencies. Efficient reversers did not improve their successive discriminations but rather tended to generalize their choice to both odors at the end of conditioning. As a consequence, both discrimination and reversal efficiency decreasedalong experimental phases. This result invalidates a learning-to-learn effect and indicates that bees do not only respond to the actual stimulus contingencies but rather combine these with an average of past experiences with the same stimuli.  

Magnetic entropy and cooling

DEFF Research Database (Denmark)

Hansen, Britt Rosendahl; Kuhn, Luise Theil; Bahl, Christian Robert Haffenden

2010-01-01

Some manifestations of magnetism are well-known and utilized on an everyday basis, e.g. using a refrigerator magnet for hanging that important note on the refrigerator door. Others are, so far, more exotic, such as cooling by making use of the magnetocaloric eect. This eect can cause a change...... in the temperature of a magnetic material when a magnetic eld is applied or removed. For many years, experimentalists have made use of dilute paramagnetic materials to achieve milliKelvin temperatures by use of the magnetocaloric eect. Also, research is done on materials, which might be used for hydrogen, helium...... or nitrogen liquefaction or for room-temperature cooling. The magnetocaloric eect can further be used to determine phase transition boundaries, if a change in the magnetic state occurs at the boundary.In this talk, I will introduce the magnetocaloric eect (MCE) and the two equations, which characterize...

Reversibility: An Engineer's Point of View

Energy Technology Data Exchange (ETDEWEB)

Berest, Pierre [LMS, ecole Polytechnique (France)

2012-07-01

Reversibility is the most consistent option in a democratic country. However reversibility may also have several drawbacks which must be identified and mitigated. Reversibility of a geological repository is a relatively new idea in France. The 1991 law dedicated to nuclear waste management considered reversibility as a possible option. Fifteen years later, the 2006 law mandated that a deep repository must be reversible and that the exact content of this notion should be defined by a new law to be discussed by the Parliament in 2015. Reversibility was not a concern put forward by engineers. It clearly originated from a societal demand sponsored and formulated by the Parliament. Since 1991, the exact meaning of this mandate progressively became more precise. In the early days, reversibility meant the technical and financial capability to retrieve the wastes from the repository, at least for some period of time after being emplaced. Progressively, a broader definition, suggested by Andra, was accepted: reversibility also means that a disposal facility should be operated in such a way that a stepwise decision-making process is possible. At each step, society must be able to decide to proceed to the next step, to pause or to reverse a step. Several benefits can be expected from a reversible repository. Some technical safety concerns may be only recognised after waste emplacement. Radioactive wastes may become a resource whose recoverability is desirable. Regulations may change, alternative waste treatment or better disposal techniques may be developed, or the need to modify a component of the facility may arise. Looking back at how chemical or domestic wastes were managed some 50 years ago easily underscores that it is not unreasonable to hope for significant advances in the future. For scientists and engineers, reversibility proves to have several other merits. To design and build a good repository, time is needed. The operator of a mine or of an oil field knows that

Reversible and non-reversible enlargement of cerebral spinal fluid spaces in anorexia nervosa

International Nuclear Information System (INIS)

Artmann, H.; Grau, H.; Adelmann, M.; Schleiffer, R.

1985-01-01

Brain CT studies of 35 patients with anoxia nervosa confirmed the observations of other authors: cerebral dystrophic changes correlate with weight loss and the reversibility of these changes also correlates with the normalization of body weight. Other corroborated facts are: the most numerous and most pronounced enlargements are of the cortical sulci and the interhemispheric fissure, moderate widening affects the ventricles and the rarest and most insignificant changes are those of the cerebellum. The reversibility of the changes showed a parallel to the extent of the changes themselves and to the duration of improvement of the body weight. The reversibility of the enlargement of the cortical sulci and of the distances between the frontal horns of the lateral ventricles was more often significant than that of the abnormal measurements of the cella media. This difference is based on minimal early acquired brain damage which occurs in 60% of our patients. This high incidence of early acquired minimal brain disease in patients with anorexia nervosa is here discussed as a nonspecific predisposing factor. Although there is no exact explanation of the etiology of the reversible enlargement of cerenral spinal fluid (CSF) spaces in anorexia nervosa, the changes resemble those in alcoholics. The mechanisms of brain changes in alcoholism, as shown experimentally, seem to us to throw light on the probable mechanism of reversible dystrophic brain changes in anorexia nervosa. (orig.)

Reversible and non-reversible enlargement of cerebral spinal fluid spaces in anorexia nervosa

Energy Technology Data Exchange (ETDEWEB)

Artmann, H.; Grau, H.; Adelmann, M.; Schleiffer, R.

1985-07-01

Brain CT studies of 35 patients with anoxia nervosa confirmed the observations of other authors: cerebral dystrophic changes correlate with weight loss and the reversibility of these changes also correlates with the normalization of body weight. Other corroborated facts are: the most numerous and most pronounced enlargements are of the cortical sulci and the interhemispheric fissure, moderate widening affects the ventricles and the rarest and most insignificant changes are those of the cerebellum. The reversibility of the changes showed a parallel to the extent of the changes themselves and to the duration of improvement of the body weight. The reversibility of the enlargement of the cortical sulci and of the distances between the frontal horns of the lateral ventricles was more often significant than that of the abnormal measurements of the cella media. This difference is based on minimal early acquired brain damage which occurs in 60% of our patients. This high incidence of early acquired minimal brain disease in patients with anorexia nervosa is here discussed as a nonspecific predisposing factor. Although there is no exact explanation of the etiology of the reversible enlargement of cerenral spinal fluid (CSF) spaces in anorexia nervosa, the changes resemble those in alcoholics. The mechanisms of brain changes in alcoholism, as shown experimentally, seem to us to throw light on the probable mechanism of reversible dystrophic brain changes in anorexia nervosa.

Magnetization reversal in ultrashort magnetic field pulses

International Nuclear Information System (INIS)

Bauer, M.; Lopusnik, R.; Fassbender, J.; Hillebrands, B.

2000-01-01

We report the switching properties of a thin magnetic film subject to an ultrashort, laterally localized magnetic field pulse, obtained by numerical investigations. The magnetization distribution in the film is calculated on a grid assuming Stoner-like coherent rotation within the grid square size. Perpendicularly and in-plane magnetized films exhibit a magnetization reversal due to a 4 ps magnetic field pulse. Outside the central region the pulse duration is short compared to the precession period. In this area the evolution of the magnetization during the field pulse does not depend strongly on magnetic damping and/or pulse shape. However, the final magnetization distribution is affected by the magnetic damping. Although the pulse duration is short compared to the precession period, the time needed for the relaxation of the magnetization to the equilibrium state is rather large. The influence of the different magnetic anisotropy contributions and the magnetic damping parameter enters into the magnetization reversal process. Comparing the case of perpendicular anisotropy with different kinds of in-plane anisotropies, a principal difference is found due to the symmetry of the shape anisotropy with respect to the anisotropy in question

Reversal agents in anaesthesia and critical care

Directory of Open Access Journals (Sweden)

Nibedita Pani

2015-01-01

Full Text Available Despite the advent of short and ultra-short acting drugs, an in-depth knowledge of the reversal agents used is a necessity for any anaesthesiologist. Reversal agents are defined as any drug used to reverse the effects of anaesthetics, narcotics or potentially toxic agents. The controversy on the routine reversal of neuromuscular blockade still exists. The advent of newer reversal agents like sugammadex have made the use of steroidal neuromuscular blockers like rocuronium feasible in rapid sequence induction situations. We made a review of the older reversal agents and those still under investigation for drugs that are regularly used in our anaesthesia practice.

The misconception of mean-reversion

International Nuclear Information System (INIS)

Eliazar, Iddo I; Cohen, Morrel H

2012-01-01

The notion of random motion in a potential well is elemental in the physical sciences and beyond. Quantitatively, this notion is described by reverting diffusions—asymptotically stationary diffusion processes which are simultaneously (i) driven toward a reversion level by a deterministic force, and (ii) perturbed off the reversion level by a random white noise. The archetypal example of reverting diffusions is the Ornstein–Uhlenbeck process, which is mean-reverting. In this paper we analyze reverting diffusions and establish that: (i) if the magnitude of the perturbing noise is constant then the diffusion's stationary density is unimodal and the diffusion is mode-reverting; (ii) if the magnitude of the perturbing noise is non-constant then, in general, neither is the diffusion's stationary density unimodal, nor is the diffusion mode-reverting. In the latter case we further establish a result asserting when unimodality and mode-reversion do hold. In particular, we demonstrate that the notion of mean-reversion, which is fundamental in economics and finance, is a misconception—as mean-reversion is an exception rather than the norm. (fast track communication)

Parkinson’s disease managing reversible neurodegeneration

Science.gov (United States)

Hinz, Marty; Stein, Alvin; Cole, Ted; McDougall, Beth; Westaway, Mark

2016-01-01

Traditionally, the Parkinson’s disease (PD) symptom course has been classified as an irreversible progressive neurodegenerative disease. This paper documents 29 PD and treatment-induced systemic depletion etiologies which cause and/or exacerbate the seven novel primary relative nutritional deficiencies associated with PD. These reversible relative nutritional deficiencies (RNDs) may facilitate and accelerate irreversible progressive neurodegeneration, while other reversible RNDs may induce previously undocumented reversible pseudo-neurodegeneration that is hiding in plain sight since the symptoms are identical to the symptoms being experienced by the PD patient. Documented herein is a novel nutritional approach for reversible processes management which may slow or halt irreversible progressive neurodegenerative disease and correct reversible RNDs whose symptoms are identical to the patient’s PD symptoms. PMID:27103805

Micromagnetic simulation for the magnetization reversal process of Nd-Fe-B hot-deformed nanocrystalline permanent magnets

Directory of Open Access Journals (Sweden)

Hiroshi Tsukahara

2017-05-01

Full Text Available We numerically demonstrated the magnetization reversal process inside a hot-deformed nanocrystalline permanent magnet. We performed large-scale micromagnetics simulation based on the Landau–Lifshitz–Gilbert equation with 0.1 billion calculation cells. The simulation model for the hot-deformed nanocrystalline permanent magnet consists of 2622 tabular grains that interact with each other by inter-grain exchange and dipole interactions. When the strength of the external field approached a coercive force, nucleation cores were created at the grain surface. The magnetization reversal was propagated by the inter-grain and dipole interactions. When the grains had overlapping regions parallel to the external field, the magnetization reversal propagated quickly between the grains due to the dipole interaction. In contrast, the motion of the magnetic domain wall was inhibited at interfaces between the grains perpendicular to the external field. Reversal magnetic domains had a pillar-shaped structure that is parallel to the external field. In the perpendicular direction, the reversal magnetic domain expanded gradually because of the inhibition of the domain wall motion.

Reversible machine code and its abstract processor architecture

DEFF Research Database (Denmark)

Axelsen, Holger Bock; Glück, Robert; Yokoyama, Tetsuo

2007-01-01

A reversible abstract machine architecture and its reversible machine code are presented and formalized. For machine code to be reversible, both the underlying control logic and each instruction must be reversible. A general class of machine instruction sets was proven to be reversible, building...

A Typology of Reverse Innovation

DEFF Research Database (Denmark)

von Zedtwitz, Max; Corsi, Simone; Søberg, Peder Veng

2015-01-01

secondary market introduction, this study expands the espoused definition of reverse innovation beyond its market-introduction focus with reversals in the flow of innovation in the ideation and product development phases. Recognizing that each phase can take place in different geographical locations...... taking place in an emerging country. This analytical framework allows recasting of current research at the intersection between innovation and international business. Of the 10 reverse innovation flows, six are new and have not been covered in the literature to date. The study addresses questions......’s portfolio of global innovation competence and capability. The implications for management are concerned with internal and external resistance to reverse innovation. Most significantly, while greater recognition and power of innovation in formerly subordinate organizational units is inconvenient to some...

Observation austenite memory and significant enhancement of tensile properties during cyclic reverse martensite transformation in a Fe-Ni-C TRIP steel

Energy Technology Data Exchange (ETDEWEB)

Alaei, Aida; Jafarian, Hamidreza, E-mail: jafarian@iust.ac.ir; Eivani, Ali Reza

2016-10-31

In this study, the influence of reverse martensite transformation (reverse transformation) on microstructure development and mechanical properties of Fe-24Ni-0.3C metastable austenitic TRIP steel was investigated. Microstructural characterization by electron backscatter diffraction (EBSD) system proved that large amount of low angle boundaries appeared after 1-cycle of reverse transformation (γ→α→γ). It is also found that the 1-cycle reversely transformed austenite and original austenite exhibited similar shape, size and orientations indicating that austenite memory appeared during reverse transformation. By increasing the number of reverse transformation cycle, fraction of low angle boundaries significantly increased. Uniaxial tensile test exhibited that yield and ultimate tensile strengths significantly improved even by 1-cycle reverse transformation comparing to the starting material. In addition, further continuation of reverse transformation up to 5- or 7-cycle causes gradual increase in yield and ultimate tensile strengths as well. The significant improvement in yield strength should be originated from increasing the dislocation density that are introduced during reverse transformation.

Elements of a Reversible Object-Oriented Language

DEFF Research Database (Denmark)

Schultz, Ulrik Pagh; Axelsen, Holger Bock

2016-01-01

This paper presents initial ideas for the design and implementation of a reversible object-oriented language based on extending Janus with object-oriented concepts such as classes that encapsulate behavior and state, inheritance, virtual dispatching, as well as constructors. We show that virtual...... dispatching is a reversible decision mechanism easily translatable to a standard reversible programming model such as Janus, and we argue that reversible management of state can be accomplished using reversible constructors. The language is implemented in terms of translation to standard Janus programs....

Drift reversal capability in helical systems

International Nuclear Information System (INIS)

Yokoyama, M.; Itoh, K.; Okamura, S.

2002-10-01

The maximum-J (J is the second adiabatic invariant) capability, i.e., the drift reversal capability, is examined in quasi-axisymmetric (QAS) stellarators and quasi-poloidally symmetric (QPS) stellarators as a possible mechanism for turbulent transport suppression. Due to the existence of non-axisymmetry of the magnetic field strength in QAS configurations, a local maximum of J is created to cause the drift reversal. The increase of magnetic shear in finite beta equilibria also has favorable effect in realizing the drift reversal. The radial variation of the uniform magnetic field component plays a crucial role for the drift reversal in a QPS configuration. Thus, the drift reversal capability and its external controllability are demonstrated for QAS and QPS stellarators, by which the impact of magnetic configuration on turbulent transport can be studied in experiments. (author)

Drift reversal capability in helical systems

International Nuclear Information System (INIS)

Yokoyama, M.; Itoh, K.; Okamura, S.; Matsuoka, K.; Nakajima, N.; Itoh, S.-I.; Neilson, G.H.; Zarnstorff, M.C.; Rewoldt, G.

2003-01-01

The maximum-J (J is the second adiabatic invariant) capability, i.e., the drift reversal capability, is examined in quasi-axisymmetric (QAS) stellarators and quasi-poloidally symmetric (QPS) stellarators as a possible mechanism for turbulent transport suppression. Due to the existence of non-axisymmetry of the magnetic field strength in QAS configurations, a local maximum of J is created to cause the drift reversal. The increase of magnetic shear in finite beta equilibria also has favorable effect in realizing the drift reversal. The radial variation of the uniform magnetic field component plays a crucial role for the drift reversal in a QPS configuration. Thus, the drift reversal capability and its external controllability are demonstrated for QAS and QPS stellarators, by which the impact of magnetic configuration on turbulent transport can be studied in experiments. (author)

Kinetic Line Voronoi Operations and Their Reversibility

DEFF Research Database (Denmark)

Mioc, Darka; Anton, François; Gold, Christopher

2010-01-01

In Geographic Information Systems the reversibility of map update operations has not been explored yet. In this paper we are using the Voronoi based Quad-edge data structure to define reversible map update operations. The reversibility of the map operations has been formalised at the lowest level...... mechanisms and dynamic map visualisations. In order to use the reversibility within the kinetic Voronoi diagram of points and open oriented line segments, we need to assure that reversing the map commands will produce exactly the changes in the map equivalent to the previous map states. To prove...... that reversing the map update operations produces the exact reverse changes, we show an isomorphism between the set of complex operations on the kinetic Voronoi diagram of points and open oriented line segments and the sets of numbers of new / deleted Voronoi regions induced by these operations, and its...

Use of electroporation and reverse iontophoresis for extraction of transdermal multibiomarkers

Directory of Open Access Journals (Sweden)

Ching CTS

2012-02-01

Full Text Available Congo Tak-Shing Ching1,2, Lin-Shien Fu3-5, Tai-Ping Sun1, Tzu-Hsiang Hsu1, Kang-Ming Chang21Department of Electrical Engineering, National Chi Nan University, Puli, Nantou County, 2Department of Photonics and Communication Engineering, Asia University, Wufeng, Taichung, 3Department of Pediatrics, National Yang Ming University, Taipei, 4Institute of Technology, National Chi Nan University, Puli, 5Department of Pediatrics, Taichung Veterans General Hospital, Taichung City, TaiwanBackground: Monitoring of biomarkers, like urea, prostate-specific antigen (PSA, and osteopontin, is very important because they are related to kidney disease, prostate cancer, and ovarian cancer, respectively. It is well known that reverse iontophoresis can enhance transdermal extraction of small molecules, and even large molecules if reverse iontophoresis is used together with electroporation. Electroporation is the use of a high-voltage electrical pulse to create nanochannels within the stratum corneum, temporarily and reversibly. Reverse iontophoresis is the use of a small current to facilitate both charged and uncharged molecule transportation across the skin. The objectives of this in vitro study were to determine whether PSA and osteopontin are extractable transdermally and noninvasively and whether urea, PSA, and osteopontin can be extracted simultaneously by electroporation and reverse iontophoresis.Methods: All in vitro experiments were conducted using a diffusion cell assembled with the stratum corneum of porcine skin. Three different symmetrical biphasic direct currents (SBdc, five various electroporations, and a combination of the two techniques were applied to the diffusion cell via Ag/AgCl electrodes. The three different SBdc had the same current density of 0.3 mA/cm2, but different phase durations of 0 (ie, no current, control group, 30, and 180 seconds. The five different electroporations had the same pulse width of 1 msec and number of pulses per second