Probabalistic analysis of the protection of a PWR against overpressure

International Nuclear Information System (INIS)

Coudert, C.; Amesz, J.; Volta, G.

1977-03-01

The problem of assessing the probability distribution of accidental transients in a nuclear plant is dealt with. The presented method consists of a combined probabilistic-deterministic approach. This approach is probabilistic in the sense that for each combination of system states a probability figure is determined by means of a fault-free analysis. It is deterministic in the sense that the corresponding sequence (e.g. magnitude of over-pressure) for each combination of states is computed by deterministic codes. An example is given in which the overpressure distribution of a pressurized water reactor is estimated

A study of sonic boom overpressure trends with respect to weight, altitude, Mach number, and vehicle shaping

Science.gov (United States)

Needleman, Kathy E.; Mack, Robert J.

1990-01-01

This paper presents and discusses trends in nose shock overpressure generated by two conceptual Mach 2.0 configurations. One configuration was designed for high aerodynamic efficiency, while the other was designed to produce a low boom, shaped-overpressure signature. Aerodynamic lift, sonic boom minimization, and Mach-sliced/area-rule codes were used to analyze and compute the sonic boom characteristics of both configurations with respect to cruise Mach number, weight, and altitude. The influence of these parameters on the overpressure and the overpressure trends are discussed and conclusions are given.

Over-pressure test on BARCOM pre-stressed concrete containment

Energy Technology Data Exchange (ETDEWEB)

Parmar, R.M.; Singh, Tarvinder; Thangamani, I.; Trivedi, Neha; Singh, Ram Kumar, E-mail: rksingh@barc.gov.in

2014-04-01

Bhabha Atomic Research Centre (BARC), Trombay has organized an International Round Robin Analysis program to carry out the ultimate load capacity assessment of BARC Containment (BARCOM) test model. The test model located in BARC facilities Tarapur; is a 1:4 scale representation of 540 MWe Pressurized Heavy Water Reactor (PHWR) pre-stressed concrete inner containment structure of Tarapur Atomic Power Station (TAPS) unit 3 and 4. There are a large number of sensors installed in BARCOM that include vibratory wire strain gauges of embedded and spot-welded type, surface mounted electrical resistance strain gauges, dial gauges, earth pressure cells, tilt meters and high resolution digital camera systems for structural response, crack monitoring and fracture parameter measurement to evaluate the local and global behavior of the containment test model. The model has been tested pneumatically during the low pressure tests (LPTs) followed by proof test (PT) and integrated leakage rate test (ILRT) during commissioning. Further the over pressure test (OPT) has been carried out to establish the failure mode of BARCOM Test-Model. The over-pressure test will be completed shortly to reach the functional failure of the test model. Pre-test evaluation of BARCOM was carried out with the results obtained from the registered international round robin participants in January 2009 followed by the post-test assessment in February 2011. The test results along with the various failure modes related to the structural members – concrete, rebars and tendons identified in terms of prescribed milestones are presented in this paper along with the comparison of the pre-test predictions submitted by the registered participants of the Round Robin Analysis for BARCOM test model.

Investigation of Thermophysical Parameters Properties for Enhancing Overpressure Mechanism Estimation. Case Study: Miri Area, West Baram Delta

Science.gov (United States)

Adha, Kurniawan; Yusoff, Wan Ismail Wan; Almanna Lubis, Luluan

2017-10-01

Determining the pore pressure data and overpressure zone is a compulsory part of oil and gas exploration in which the data can enhance the safety with profit and preventing the drilling hazards. Investigation of thermophysical parameters such as temperature and thermal conductivity can enhance the pore pressure estimation for overpressure mechanism determination. Since those parameters are dependent on rock properties, it may reflect the changes on the column of thermophysical parameters when there is abnormally in pore pressure. The study was conducted in “MRI 1” well offshore Sarawak, where a new approach method designed to determine the overpressure generation. The study was insisted the contribution of thermophysical parameters for supporting the velocity analysis method, petrophysical analysis were done in these studies. Four thermal facies were identified along the well. The overpressure developed below the thermal facies 4, where the pressure reached 38 Mpa and temperature was increasing significantly. The velocity and the thermal conductivity cross plots shows a linear relationship since the both parameters mainly are the function of the rock compaction. When the rock more compact, the particles were brought closer into contact and making the sound wave going faster while the thermal conductivity were increasing. In addition, the increment of temperature and high heat flow indicated the presence of fluid expansion mechanism. Since the shale sonic velocity and density analysis were the common methods in overpressure mechanism and pore pressure estimation. As the addition parameters for determining overpressure zone, the presence of thermophysical analysis was enhancing the current method, where the current method was the single function of velocity analysis. The presence of thermophysical analysis will improve the understanding in overpressure mechanism determination as the new input parameters. Thus, integrated of thermophysical technique and velocity

Structural response of reactor-core hexcan subassemblies subjected to dynamic overpressurization under accident conditions

International Nuclear Information System (INIS)

Pfeiffer, P.A.; Kulak, R.F.

1993-01-01

This paper presents a two-dimensional structural analysis for the evaluation of a single core subassembly due to internal overpressure associated with possible failure of fuel pins having high fission gas plenum pressure. Structural models are developed for the subassemblies and their surroundings with emphasis on the critical physical aspects of the problem. With these models the strains, deformations and the extent of permanent damage (plastic strain) to the subassemblies can be assessed. The nonlinear structural analyses was performed with a finite element program called STRAW (Structural Transient Response of Assembly Wrappers). This finite element program is applicable to nonlinear large displacement problems. The results of this study indicate that the permanent deformation (damage) is strongly influenced by the rise time (time to reach peak pressure) of the pressure pulse and the pressure in the fuel pin. The rise time is influenced by the opening time of the flow path for release of gas from the fuel pin plenum. Several examples are illustrated with various rise times and pressure magnitudes and the resulting permanent deformation of the hexcan wall

Insulation vacuum and beam vacuum overpressure release

CERN Document Server

Parma, V

2009-01-01

There is evidence that the incident of 19th September caused a high pressure build-up inside the cryostat insulation vacuum which the existing overpressure devices could not contain. As a result, high longitudinal forces acting on the insulation vacuum barriers developed and broke the floor and the floor fixations of the SSS with vacuum barriers. The consequent large longitudinal displacements of the SSS damaged chains of adjacent dipole cryo-magnets. Estimates of the helium mass flow and the pressure build- up experienced in the incident are presented together with the pressure build-up for an even more hazardous event, the Maximum Credible Incident (MCI). The strategy of limiting the maximum pressure by the installation of addition pressure relieve devices is presented and discussed. Both beam vacuum lines were ruptured during the incident in sector 3-4 giving rise to both mechanical damage and pollution of the system. The sequence, causes and effects of this damage will be briefly reviewed. We will then an...

Rapid sedimentation and overpressure in shallow sediments of the Bering Trough, offshore southern Alaska

Science.gov (United States)

Daigle, Hugh; Worthington, Lindsay L.; Gulick, Sean P. S.; Van Avendonk, Harm J. A.

2017-04-01

Pore pressures in sediments at convergent margins play an important role in driving chemical fluxes and controlling deformation styles and localization. In the Bering Trough offshore Southern Alaska, extreme sedimentation rates over the last 140 kyr as a result of glacial advance/retreats on the continental shelf have resulted in elevated pore fluid pressures in slope sediments overlying the Pamplona Zone fold and thrust belt, the accretionary wedge resulting from subduction of the Yakutat microplate beneath the North American Plate. Based on laboratory experiments and downhole logs acquired at Integrated Ocean Drilling Program Site U1421, we predict that the overpressure in the slope sediments may be as high as 92% of the lithostatic stress. Results of one-dimensional numerical modeling accounting for changes in sedimentation rate over the last 130 kyr predicted overpressures that are consistent with our estimates, suggesting that the overpressure is a direct result of the rapid sedimentation experienced on the Bering shelf and slope. Comparisons with other convergent margins indicate that such rapid sedimentation and high overpressure are anomalous in sediments overlying accretionary wedges. We hypothesize that the shallow overpressure on the Bering shelf/slope has fundamentally altered the deformation style within the Pamplona Zone by suppressing development of faults and may inhibit seismicity by focusing faulting elsewhere or causing deformation on existing faults to be aseismic. These consequences are probably long-lived as it may take several million years for the excess pressure to dissipate.

Space Launch System Scale Model Acoustic Test Ignition Overpressure Testing

Science.gov (United States)

Nance, Donald; Liever, Peter; Nielsen, Tanner

2015-01-01

The overpressure phenomenon is a transient fluid dynamic event occurring during rocket propulsion system ignition. This phenomenon results from fluid compression of the accelerating plume gas, subsequent rarefaction, and subsequent propagation from the exhaust trench and duct holes. The high-amplitude unsteady fluid-dynamic perturbations can adversely affect the vehicle and surrounding structure. Commonly known as ignition overpressure (IOP), this is an important design-to environment for the Space Launch System (SLS) that NASA is currently developing. Subscale testing is useful in validating and verifying the IOP environment. This was one of the objectives of the Scale Model Acoustic Test, conducted at Marshall Space Flight Center. The test data quantifies the effectiveness of the SLS IOP suppression system and improves the analytical models used to predict the SLS IOP environments. The reduction and analysis of the data gathered during the SMAT IOP test series requires identification and characterization of multiple dynamic events and scaling of the event waveforms to provide the most accurate comparisons to determine the effectiveness of the IOP suppression systems. The identification and characterization of the overpressure events, the waveform scaling, the computation of the IOP suppression system knockdown factors, and preliminary comparisons to the analytical models are discussed.

Space Launch System Scale Model Acoustic Test Ignition Overpressure Testing

Science.gov (United States)

Nance, Donald K.; Liever, Peter A.

2015-01-01

The overpressure phenomenon is a transient fluid dynamic event occurring during rocket propulsion system ignition. This phenomenon results from fluid compression of the accelerating plume gas, subsequent rarefaction, and subsequent propagation from the exhaust trench and duct holes. The high-amplitude unsteady fluid-dynamic perturbations can adversely affect the vehicle and surrounding structure. Commonly known as ignition overpressure (IOP), this is an important design-to environment for the Space Launch System (SLS) that NASA is currently developing. Subscale testing is useful in validating and verifying the IOP environment. This was one of the objectives of the Scale Model Acoustic Test (SMAT), conducted at Marshall Space Flight Center (MSFC). The test data quantifies the effectiveness of the SLS IOP suppression system and improves the analytical models used to predict the SLS IOP environments. The reduction and analysis of the data gathered during the SMAT IOP test series requires identification and characterization of multiple dynamic events and scaling of the event waveforms to provide the most accurate comparisons to determine the effectiveness of the IOP suppression systems. The identification and characterization of the overpressure events, the waveform scaling, the computation of the IOP suppression system knockdown factors, and preliminary comparisons to the analytical models are discussed.

Thermodynamically consistent model of brittle oil shales under overpressure

Science.gov (United States)

Izvekov, Oleg

2016-04-01

The concept of dual porosity is a common way for simulation of oil shale production. In the frame of this concept the porous fractured media is considered as superposition of two permeable continua with mass exchange. As a rule the concept doesn't take into account such as the well-known phenomenon as slip along natural fractures, overpressure in low permeability matrix and so on. Overpressure can lead to development of secondary fractures in low permeability matrix in the process of drilling and pressure reduction during production. In this work a new thermodynamically consistent model which generalizes the model of dual porosity is proposed. Particularities of the model are as follows. The set of natural fractures is considered as permeable continuum. Damage mechanics is applied to simulation of secondary fractures development in low permeability matrix. Slip along natural fractures is simulated in the frame of plasticity theory with Drucker-Prager criterion.

Simulation and Measurements of Small Arms Blast Wave Overpressure in the Process of Designing a Silencer

Directory of Open Access Journals (Sweden)

Hristov Nebojša

2015-02-01

Full Text Available Simulation and measurements of muzzle blast overpressure and its physical manifestations are studied in this paper. The use of a silencer can have a great influence on the overpressure intensity. A silencer is regarded as an acoustic transducer and a waveguide. Wave equations for an acoustic dotted source of directed effect are used for physical interpretation of overpressure as an acoustic phenomenon. Decomposition approach has proven to be suitable to describe the formation of the output wave of the wave transducer. Electroacoustic analogies are used for simulations. A measurement chain was used to compare the simulation results with the experimental ones.

Effect of overpressure on gas hydrate distribution

Energy Technology Data Exchange (ETDEWEB)

Bhatnagar, G.; Chapman, W.G.; Hirasaki, G.J. [Rice Univ., Houston, TX (United States). Dept. of Chemical and Biomolecular Engineering; Dickens, G.R.; Dugan, B. [Rice Univ., Houston, TX (United States). Dept. of Earth Sciences

2008-07-01

Natural gas hydrate systems can be characterized by high sedimentation rates and/or low permeability sediments, which can lead to pore pressure higher than hydrostatic. This paper discussed a study that examined this effect of overpressure on gas hydrate and free gas distribution in marine sediments. A one-dimensional numerical model that coupled sedimentation, fluid flow, and gas hydrate formation was utilized. In order to quantify the relative importance of sedimentation rates and low permeability sediments, a dimensionless sedimentation-compaction group (scN) was defined, that compared the absolute permeability of the sediments to the sedimentation rate. Higher values of scN mean higher permeability or low sedimentation rate which generally yield hydrostatic pore pressure while lower values of scN normally create pore pressure greater than hydrostatic. The paper discussed non-hydrostatic consolidation in gas hydrate systems, including mass balances; constitutive relationships; normalized variables; and dimensionless groups. A numerical solution to the problem was presented. It was concluded that simulation results demonstrated that decreasing scN not only increased pore pressure above hydrostatic values, but also lowered the lithostatic stress gradient and gas hydrate saturation. This occurred because overpressure resulted in lower effective stress, causing higher porosity and lower bulk density of the sediment. 16 refs., 5 figs., 1 appendix.

A wireless lingual feedback device to reduce overpressures in seated posture: a feasibility study.

Directory of Open Access Journals (Sweden)

Olivier Chenu

2009-10-01

Full Text Available Pressure sores are localized injuries to the skin and underlying tissues and are mainly resulting from overpressure. Paraplegic peoples are particularly subjects to pressure sores because of long-time seated postures and sensory deprivation at the lower limbs.Here we report outcomes of a feasibility trial involving a biofeedback system aimed at reducing buttock overpressure whilst an individual is seated. The system consists of (1 pressure sensors, (2 a laptop coupling sensors and actuator (3 a wireless Tongue Display Unit (TDU consisting of a circuit embedded in a dental retainer with electrodes put in contact with the tongue. The principle consists in (1 detecting overpressures in people who are seated over long periods of time, (2 estimating a postural change that could reduce these overpressures and (3 communicating this change through directional information transmitted by the TDU.Twenty-four healthy subjects voluntarily participated in this study. Twelve healthy subjects initially formed the experimental group (EG and were seated on a chair with the wireless TDU inside their mouth. They were asked to follow TDU orders that were randomly spread throughout the session. They were evaluated during two experimental sessions during which 20 electro-stimulations were sent. Twelve other subjects, added retrospectively, formed the control group (CG. These subjects participated in one session of the same experiment without any biofeedback.Three dependent variables were computed: (1 the ability of subjects to reach target posture (EG versus CG, (2 high pressure reductions after a biofeedback (EG versus CG and (3 the level of these reductions relative to their initial values (EG only. Results show (1 that EG reached target postures in 90.2% of the trials, against 5,3% in the CG, (2 a significant reduction in overpressures in the EG compared to the CG and (3, for the EG, that the higher the initial pressures were, the more they were decreased

A Wireless Lingual Feedback Device to Reduce Overpressures in Seated Posture: A Feasibility Study

Science.gov (United States)

Chenu, Olivier; Vuillerme, Nicolas; Demongeot, Jacques; Payan, Yohan

2009-01-01

Background Pressure sores are localized injuries to the skin and underlying tissues and are mainly resulting from overpressure. Paraplegic peoples are particularly subjects to pressure sores because of long-time seated postures and sensory deprivation at the lower limbs. Methodology/Principal Findings Here we report outcomes of a feasibility trial involving a biofeedback system aimed at reducing buttock overpressure whilst an individual is seated. The system consists of (1) pressure sensors, (2) a laptop coupling sensors and actuator (3) a wireless Tongue Display Unit (TDU) consisting of a circuit embedded in a dental retainer with electrodes put in contact with the tongue. The principle consists in (1) detecting overpressures in people who are seated over long periods of time, (2) estimating a postural change that could reduce these overpressures and (3) communicating this change through directional information transmitted by the TDU.Twenty-four healthy subjects voluntarily participated in this study. Twelve healthy subjects initially formed the experimental group (EG) and were seated on a chair with the wireless TDU inside their mouth. They were asked to follow TDU orders that were randomly spread throughout the session. They were evaluated during two experimental sessions during which 20 electro-stimulations were sent. Twelve other subjects, added retrospectively, formed the control group (CG). These subjects participated in one session of the same experiment without any biofeedback.Three dependent variables were computed: (1) the ability of subjects to reach target posture (EG versus CG), (2) high pressure reductions after a biofeedback (EG versus CG) and (3) the level of these reductions relative to their initial values (EG only). Results show (1) that EG reached target postures in 90.2% of the trials, against 5,3% in the CG, (2) a significant reduction in overpressures in the EG compared to the CG and (3), for the EG, that the higher the initial pressures

Analysis of over-pressure mechanisms in the Uinta Basin, Utah

Energy Technology Data Exchange (ETDEWEB)

McPherson, B.; Bredehoeft, J. [Geological Survey, Menlo Park, CA (United States)

1995-03-01

Extremely high pore fluid pressures exist in the area of the Altamount/Bluebell oil field in the Uinta basin, Utah. We discuss two possible mechanisms for the cause of these over-pressures in this paper: (1) compaction disequilibrium, and (2) conversion of kerogen to liquid hydrocarbon (oil). Compaction disequilibrium occurs during periods of rapid sedimentation. If the permeability of deeply buried strata is low, then connate water within the rock matrix does not escape rapidly enough as compaction occurs; as sedimentary deposition continues, high pore fluid pressures develop. Conversion of solid kerogen to a liquid generates both a liquid and additional pore space for the liquid to occupy. If the volume of the liquid generated is just sufficient to fill the pore space generated, then there will be no accompanying effect on the pore pressure. If the liquid is less dense than the solid it replaces, then there is more liquid than pore space created; pore pressure will increase, causing flow away from the area of the reaction. Pore pressure is a sensitive measure of the balance between hydrocarbon generation and expulsion from the source into adjacent strata. If high pore pressures exist only where source rocks are thought to be generating oil, then kerogen conversion is a likely over-pressure mechanism. However, if over-pressures are found in low-permeability strata regardless of source rock proximity, then sedimentary compaction is probably a more dominant mechanism.

Study on the quantitative rod internal pressure design criterion

International Nuclear Information System (INIS)

Kim, Kyu Tae; Kim, Oh Hwan; Han, Hee Tak

1991-01-01

The current rod internal pressure criterion permits fuel rods to operate with internal pressures in excess of system pressure only if internal overpressure does not cause the diametral gap enlargement. In this study, the generic allowable internal gas pressure not violating this criterion is estimated as a function of rod power. The results show that the generic allowable internal gas pressure decreases linearly with the increase of rod power. Application of the generic allowable internal gas pressure for the rod internal pressure design criterion will result in the simplication of the current design procedure for checking the diametral gap enlargement caused by internal overpressure because according to the current design procedure the cladding creepout rate should be compared with the fuel swelling rate at each axial node at each time step whenever internal pressure exceeds the system pressure. (Author)

The Development of a Cryogenic Over-Pressure

Energy Technology Data Exchange (ETDEWEB)

Alvarez, Matthew L. [Illinois Inst. of Technology, Chicago, IL (United States)

2012-01-01

The Dark Energy Survey (DES) project will study the accelerated expansion of the universe. In order to further study this phenomenon, scientists have devised a method of creating an array of charged couple devices (CCD) to capture images that will be studied. These CCDs must be cooled and remain at 173K to eliminate thermal gradients and dark current. Therefore, a two-phase CCD liquid nitrogen (LN2) cooling system was designed to maintain the array of CCDs at a constant temperature. However, the centrifugal pump used to supply LN2 has a mean time between failure (MTBF) of approximately two thousand-eight hundred hours (116 days). Because of the low MTBF of the centrifugal pump, a new pump is being considered to replace the existing one. This positive displacement pump is a simpler design that is expected to have a MTBF that will exceed 116 days (2800hrs). This positive displacement reciprocating pump, also known as, the cryogenic over-pressure pump (OPP), was tested in February 2012 and successfully cooled the CCD array to 173K. Though unfit for service for DES CCD cooling system, the overall concept of this pump has been proven. Typical ow rates, pressures, and temperatures trends have been captured via instrumentation and are specific to the operation of future over-pressure pumps.

Nankai Stress History and Implications for an Overpressured Decollement

Science.gov (United States)

Moran, K.; O'Regan, M.

2005-12-01

The Nankai Trough, formed from the subduction of the Shikoku Basin beneath the island arc of southwestern Japan, is a relatively young accretionary complex converging at a rate of ~4 cm/yr [Shipboard Scientific Party, 2001a]. The region was studied during the Deep Sea Drilling Project and on three Ocean Drilling Program (ODP) Legs-131, 190 and 196. Three sites visited during these Legs form a single cross-margin transect (dubbed the Muroto Transect) that traverses the leading edge of the Nankai accretionary prism, from seaward of the deformation front at Site 1173, to close to the deformation front (Site 1174), and landward to the first frontal thrust (Site 808). The decollement, which forms the major boundary between the converging plates, occurs within the Lower Shikoku Basin stratigraphic unit. The ODP sites were drilled and cored to depths below the decollement (Sites 808 and 1174) and the proto-decollement (Site 1173). Here we present consolidation test results [Moran et al., 1993] that are consistent with porosity-depth functions from core and log measurements for the Lower Shikoku Basin sediments, assuming that the decollement is an overpressured seal. At 1173, where a true decollement has not yet formed, moderate fluid overpressures occur that can be fully attributed to high turbiditic sedimentation rates. Forward modeling of this site into the deformation front over a period of ~300 ky shows that the present 1173 porosity-depth function matches the porosity-depth function at 1174. These results suggest that the young decollement on the Muroto Transect at the deformation front and landward is highly overpressured and forms a seal to sediments below that can be classically modeled as a one-dimensional consolidation system.

Acoustic investigation of the aperture dynamics of an elastic membrane closing an overpressurized cylindrical cavity

Science.gov (United States)

Sánchez, Claudia; Vidal, Valérie; Melo, Francisco

2015-08-01

We report an experimental study of the acoustic signal produced by the rupture of an elastic membrane that initially closes a cylindrical overpressurized cavity. This configuration has been recently used as an experimental model system for the investigation of the acoustic emission from the bursting of elongated gas bubbles rising in a conduit. Here, we investigate the effect of the membrane rupture dynamics on the acoustic signal produced by the pressure release by changing the initial tension of the membrane. The initial overpressure in the cavity is fixed at a value such that the system remains in the linear acoustic regime. For large initial membrane deformation, the rupture time τ rup is small compared to the wave propagation time in the cavity and the pressure wave inside the conduit can be fully captured by the linear theory. For low membrane tension, a hole is pierced in the membrane but its rupture does not occur. For intermediate deformation, finally, the rupture progresses in two steps: first the membrane opens slowly; then, after reaching a critical size, the rupture accelerates. A transversal wave is excited along the membrane surface. The characteristic signature of each opening dynamics on the acoustic emission is described.

Current state of knowledge on the behavior of steel liners in concrete containments subjected to overpressurization loads

International Nuclear Information System (INIS)

Riesemann, W.A. von; Parks, M.B.

1995-01-01

In the US, concrete containment buildings for commercial nuclear power plants have steel liners that act as the internal pressure boundary. The liner abuts the concrete, acting as the interior concrete form. The liner is attached to the concrete by either studs or by a continuous structural shape (such as a T-section or channel) that is either continuously or intermittently welded to the liner. Studs are commonly used in reinforced concrete containments, while prestressed containments utilize a structural element as the anchorage. The practice in some countries follows the US practice, while in other countries the containment does not have a steel liner. In this latter case, there is a true double containment, and the annular region between the two containments is vented.This paper will review the practice of design of the liner system prior to the consideration of severe accident loads (overpressurization loads beyond the design conditions).An overpressurization test of a 1:6 scale reinforced concrete containment at Sandia National Laboratories resulted in a failure mechanism in the liner that was not fully anticipated. Post-test analyses and experiments have been conducted to understand the failure better. This work and the activities that followed the test are reviewed. Areas in which additional research should be conducted are given. (orig.)

Laboratory tests of overpressure differential systems for smoke protection of lobbies

Science.gov (United States)

Szałański, Paweł; Misiński, Jacek

2017-11-01

Paper presents the methodology of laboratory tests for ventilation overpressure differential systems for smoke protection of lobbies. Research area consists of two spaces representing the lobby and the area under fire equipped with proper ventilation installation. This allows testing of overpressure differential systems for smoke protection of lobbies. Moreover, piece of laboratory tests results for two selected smoke protection systems for lobbies are presented. First one is standard system with constantly opened transfer-damper mounted between lobby and area under fire. Second one - system with so called "electronic transfer" based on two dampers (supplying air to a lobby and to unprotected area alternatively). Opening and closing both dampers is electronically controlled. Changes of pressure difference between lobby and fire affected area during closing and opening doors between those spaces is presented. Conclusions, concerning the possibility of meeting the time period criteria of pressure difference stabilization required by standards, are presented and discussed for both systems.

BLEVE overpressure: multi-scale comparison of blast wave modeling

International Nuclear Information System (INIS)

Laboureur, D.; Buchlin, J.M.; Rambaud, P.; Heymes, F.; Lapebie, E.

2014-01-01

BLEVE overpressure modeling has been already widely studied but only few validations including the scale effect have been made. After a short overview of the main models available in literature, a comparison is done with different scales of measurements, taken from previous studies or coming from experiments performed in the frame of this research project. A discussion on the best model to use in different cases is finally proposed. (authors)

Study on the Rationality and Validity of Probit Models of Domino Effect to Chemical Process Equipment caused by Overpressure

International Nuclear Information System (INIS)

Sun, Dongliang; Huang, Guangtuan; Jiang, Juncheng; Zhang, Mingguang; Wang, Zhirong

2013-01-01

Overpressure is one important cause of domino effect in accidents of chemical process equipments. Some models considering propagation probability and threshold values of the domino effect caused by overpressure have been proposed in previous study. In order to prove the rationality and validity of the models reported in the reference, two boundary values of three damage degrees reported were considered as random variables respectively in the interval [0, 100%]. Based on the overpressure data for damage to the equipment and the damage state, and the calculation method reported in the references, the mean square errors of the four categories of damage probability models of overpressure were calculated with random boundary values, and then a relationship of mean square error vs. the two boundary value was obtained, the minimum of mean square error was obtained, compared with the result of the present work, mean square error decreases by about 3%. Therefore, the error was in the acceptable range of engineering applications, the models reported can be considered reasonable and valid.

Study on the Rationality and Validity of Probit Models of Domino Effect to Chemical Process Equipment caused by Overpressure

Science.gov (United States)

Sun, Dongliang; Huang, Guangtuan; Jiang, Juncheng; Zhang, Mingguang; Wang, Zhirong

2013-04-01

Overpressure is one important cause of domino effect in accidents of chemical process equipments. Some models considering propagation probability and threshold values of the domino effect caused by overpressure have been proposed in previous study. In order to prove the rationality and validity of the models reported in the reference, two boundary values of three damage degrees reported were considered as random variables respectively in the interval [0, 100%]. Based on the overpressure data for damage to the equipment and the damage state, and the calculation method reported in the references, the mean square errors of the four categories of damage probability models of overpressure were calculated with random boundary values, and then a relationship of mean square error vs. the two boundary value was obtained, the minimum of mean square error was obtained, compared with the result of the present work, mean square error decreases by about 3%. Therefore, the error was in the acceptable range of engineering applications, the models reported can be considered reasonable and valid.

RELAP5 Low Temperature Overpressurization Analysis for NPP Krsko

International Nuclear Information System (INIS)

Basic, I.; Krajnc, B.; Bajs, T.

2000-01-01

NEK has expressed interest in the acceptability of removing the autoclosure interlock (ACI) on the Residual Heat Removal System (RHRS) suction/isolation valves. This interest is in response to growing concerns about the loss of residual heat removal capability during cold shutdown and refueling operations. This article describes effort done to justify removal of the ACI in the light of low temperature overpressure protection of Reactor Coolant System (RCS) and RHRS and interfacing system LOCA potential. The intent of this article is to review the NEK RHRS relief valves sizing design basis and verify if the relief valves provide RHRS overpressure protection for the events possible at cold shutdown. Inadvertent isolation of RHRS during hot and cold shutdown (with reactor coolant system closed and temperatures below 177o Code 4 and5) presents one of the major safety concerns in this mode of operation. Detailed RELAP5 model of NPP Kriko following steam generator (SG) replacement and core uprate has been used in the frame of this analysis verification of RHRS relief valves sizing. The following limiting cases for cold shutdown with RCS solid conditions have been analyzed: - ransients that affect the system input/output mass balance, - ransients that affect the heat input/removal balance. (author)

Large Steel Tank Fails and Rockets to Height of 30 meters - Rupture Disc Installed Incorrectly.

Science.gov (United States)

Hedlund, Frank H; Selig, Robert S; Kragh, Eva K

2016-06-01

At a brewery, the base plate-to-shell weld seam of a 90-m(3) vertical cylindrical steel tank failed catastrophically. The 4 ton tank "took off" like a rocket leaving its contents behind, and landed on a van, crushing it. The top of the tank reached a height of 30 m. The internal overpressure responsible for the failure was an estimated 60 kPa. A rupture disc rated at < 50 kPa provided overpressure protection and thus prevented the tank from being covered by the European Pressure Equipment Directive. This safeguard failed and it was later discovered that the rupture disc had been installed upside down. The organizational root cause of this incident may be a fundamental lack of appreciation of the hazards of large volumes of low-pressure compressed air or gas. A contributing factor may be that the standard piping and instrumentation diagram (P&ID) symbol for a rupture disc may confuse and lead to incorrect installation. Compressed air systems are ubiquitous. The medium is not toxic or flammable. Such systems however, when operated at "slight overpressure" can store a great deal of energy and thus constitute a hazard that ought to be addressed by safety managers.

The development of shock wave overpressure driven by channel expansion of high current impulse discharge arc

Science.gov (United States)

Xiong, Jia-ming; Li, Lee; Dai, Hong-yu; Wu, Hai-bo; Peng, Ming-yang; Lin, Fu-chang

2018-03-01

During the formation of a high current impulse discharge arc, objects near the discharge arc will be strongly impacted. In this paper, a high power, high current gas switch is used as the site of the impulse discharge arc. The explosion wave theory and the arc channel energy balance equation are introduced to analyze the development of the shock wave overpressure driven by the high current impulse discharge arc, and the demarcation point of the arc channel is given, from which the energy of the arc channel is no longer converted into shock waves. Through the analysis and calculation, it is found that the magnitude of the shock wave overpressure caused by impulse discharge arc expansion is closely related to the arc current rising rate. The arc shock wave overpressure will undergo a slow decay process and then decay rapidly. The study of this paper will perform the function of deepening the understanding of the physical nature of the impulse arc discharge, which can be used to explain the damage effect of the high current impulse discharge arc.

REDUCING THE BOOSTER STATIONS ENERGY CONSUMPTION BY WAY OF ELIMINATING OVERPRESSURE IN THE WATER SUPPLY NETWORK

Directory of Open Access Journals (Sweden)

G. N. Zdor

2015-01-01

Full Text Available The energy efficiency improvement of the city housing-and-utilities infrastructure and watersupply and water-disposal systems poses an occurrent problem. The water-supply systems energy consumption sizable share falls on the pump plants. The article deals with the issues of the operating regime management of the existing booster stations equipped with a group of pumping units regulated with frequency converters. One of the optimization directions of their energy consumption is the reduction of over-pressure in the water-distribution network and its sustentation within the regulatory values. The authors offer the structure and methodology of the data collection-and-analysis automated system utilization for revealing and eliminating the overpressure in the water-supply network. This system is designed for the group management of booster-stations operating regimes on the ground of data obtained from the pressure controlling devices at the consumers. The data exchange in the system is realized via GSM.The paper presents results of the tests carried out at the booster stations in some major cities of the Republic of Belarus. The authors analyze dependence of overpressure in the network on the methods of the plant output pressure sustentation (daily graph or constant pressure. The authors study the elimination effect of over-pressure in the water distribution network on changing the booster station pumping units operation regimes. The study shows that eliminating over pressure in the water distributing network leads to lowering the booster station pressure. This in its turn decreases its energy consumption by 15–20 % depending on the over pressure fixed level.

Analysis of the Explosive Internal Impact on the Barriers of Building Structures

Science.gov (United States)

Siwiński, Jarosław; Stolarski, Adam

2017-10-01

Work issues concern the safety of construction in relation to the hazards arising from explosion of the explosive charge located inside the building. The algorithms proposed in the paper for determining the parameters of the overpressure wave resulting from the detonation of clustered explosive charges, determine the basis for numerical simulation analyzes. Determination of the maximum value of peak pressure on the wave forehead of an internal explosion is presented on the basis of reflected wave analysis. Changeability in time of the internal explosion action describes the overpressure phase only. The analysis of the load caused by the internal explosive charge detonation was carried out under conditions of the undisturbed standard atmosphere. A load determination algorithm has been developed, taking into account the geometrical characteristics of the building barriers and the rooms as well as the parameters of environment in which the detonation occurs. The way of taking into account the influence of venting surfaces, i.e. windows, doors, ventilation ducts, on the overpressure wave parameters, was presented. Discloses a method to take into account the effect of the surface relief, i.e. windows, doors, air ducts, pressure wave parameters. Modification of the method for explosive overpressure determination presented by Cormie, Smith, Mays (2009), was proposed in the paper. This modification was developed on the basis of substitute impulse analysis for multiple overpressure pulses. In order to take into account the pressure distribution of explosive gases on the barrier surface, the method of modification the relationship for determination the changeability over time and space of the pressure of explosive gases, was presented. For this purpose, the changeability of the pressure wave angles of incidence to the barrier and the distance of the explosive charge to any point on the surface of the barrier, was taken into account. Based on the developed procedure, the

New-construction techniques and HVAC overpressurization for radon reduction in schools

International Nuclear Information System (INIS)

Saum, D.; Witter, K.A.; Craig, A.B.

1988-01-01

Construction of a school in Fairfax County, Virginia, is being carefully monitored since elevated indoor radon levels have been identified in many existing houses near the site. Soil gas radon concentrations measured prior to pouring of the slabs were also indicative of a potential radon problem should the soil gas enter the school; however, subslab radon measurements collected thus far are lower than anticipated. Radon-resistant features have been incorporated into construction of the school and include the placing of at least 100 mm of clean coarse aggregate under the slab and a plastic film barrier between the aggregate and the slab, the sealing of all expansion joints, the sealing or plugging of all utility penetrations where possible, and the painting of interior block walls. In addition, the school's heating, ventilating, and air-conditioning (HVAC) system has been designed to operate continuously in overpressurization to help reduce pressure-driven entry of radon-containing soil gas into the building. Following completion, indoor radon levels in the school will be monitored to determine the effectiveness of these radon-resistant new-construction techniques and HVAC overpressurization in limiting radon entry into the school

A new method for calculating gas content of coal reservoirs with consideration of a micro-pore overpressure environment

Directory of Open Access Journals (Sweden)

Jinxing Song

2017-05-01

Full Text Available When the gas content of a coal reservoir is calculated, the reservoir pressure measured by well logging and well testing is generally used for inversion calculation instead of gas pressure. However, the calculation result is not accurate because the reservoir pressure is not equal to the gas pressure in overpressure environments. In this paper, coal samples of different ranks in Shanxi and Henan are collected for testing the capillary pressure of coal pores. Based on the formation process of CBM reservoirs and the hydrocarbon generation and expulsion history of coal beds, the forming mechanisms of micro-pore overpressure environments in coal reservoirs were analyzed. Accordingly, a new method for calculating the gas content of coal reservoirs with consideration of a micro-pore overpressure environment was developed. And it was used to calculate the gas content of No. 1 coal bed of the 2nd member of Lower Permian Shanxi Fm in the Zhongmacun Coal Mine in Jiaozuo, Henan. It is indicated that during the formation and evolution of coals, some solid organic matters were converted into gas and water, and gas–water contact is surely formed in pores. In the end, capillary pressure is generated, so the gas pressure in micro-pores is much higher than the hydrostatic column pressure, which results in a micro-pore overpressure environment. Under such an environment, gas pressure is higher than reservoir pressure, so the gas content of coal reservoirs calculated previously based on the conventional reservoir pressure evaluation are usually underestimated. It is also found that the micro-pore overpressure environment exerts a dominating effect on the CBM content calculation of 3–100 nm pores, especially that of 3–10 nm pores, but a little effect on that of pores >100 nm. In conclusion, this new method clarifies the pressure environment of CBM gas reservoirs, thereby ensuring the calculation accuracy of gas content of coal reservoirs.

A study on the overpressure estimation of BLEVE

Energy Technology Data Exchange (ETDEWEB)

Kim, In Tae [Korean Fire Protection Association (Korea); Kim, In Won; Song, Hee Oeul [Department of Chemical Engineering, Konkuk University (Korea)

2000-03-01

Explosion quantities and flashing mass resulting from the variation of temperature are calculated by a computer program, BLEVE ESTIMATOR, to carry out the risk assessment of BLEVE. The damages caused by the BLEVE are estimated under the explosion of the simulation condition similar to the Puchun LP gas station accident, and the results are compared with the commercial program SAFER of Dupont Co. Explosion quantities and flashing mass increase exponentially with the increase of explosion temperature. These values for propane are relatively higher than those for n-butane. In conditions of higher vessel temperature, vessel pressure, and liquid ratio of containment, higher overpressures are calculated. 10 refs., 12 figs., 2 tabs.

Prevention of overpressurization of lithium-thionyl chloride battery cells

Energy Technology Data Exchange (ETDEWEB)

Ramsay, G. R.; Salmon, D. J.

1984-12-25

A method of preventing overpressurization of a lithium-thionyl chloride battery cell by formation of excessive SO/sub 2/ during high rate discharge. The method comprises the step of providing PCl/sub 5/ in the cathode. Alternatively, the PCl/sub 5/ may be provided in the electrolyte or in both the cathode and electrolyte as desired. The PCl/sub 5/ may be incorporated in the cathode by introduction thereof into the porous carbon structure of a preformed carbon element. Alternatively, the PCl/sub 5/ may be dry mixed with the carbon and the mixture formed into the desired cathode element.

Characterization of the Scale Model Acoustic Test Overpressure Environment using Computational Fluid Dynamics

Science.gov (United States)

Nielsen, Tanner; West, Jeff

2015-01-01

The Scale Model Acoustic Test (SMAT) is a 5% scale test of the Space Launch System (SLS), which is currently being designed at Marshall Space Flight Center (MSFC). The purpose of this test is to characterize and understand a variety of acoustic phenomena that occur during the early portions of lift off, one being the overpressure environment that develops shortly after booster ignition. The pressure waves that propagate from the mobile launcher (ML) exhaust hole are defined as the ignition overpressure (IOP), while the portion of the pressure waves that exit the duct or trench are the duct overpressure (DOP). Distinguishing the IOP and DOP in scale model test data has been difficult in past experiences and in early SMAT results, due to the effects of scaling the geometry. The speed of sound of the air and combustion gas constituents is not scaled, and therefore the SMAT pressure waves propagate at approximately the same speed as occurs in full scale. However, the SMAT geometry is twenty times smaller, allowing the pressure waves to move down the exhaust hole, through the trench and duct, and impact the vehicle model much faster than occurs at full scale. The DOP waves impact portions of the vehicle at the same time as the IOP waves, making it difficult to distinguish the different waves and fully understand the data. To better understand the SMAT data, a computational fluid dynamics (CFD) analysis was performed with a fictitious geometry that isolates the IOP and DOP. The upper and lower portions of the domain were segregated to accomplish the isolation in such a way that the flow physics were not significantly altered. The Loci/CHEM CFD software program was used to perform this analysis.

Explosion overpressure test series: General-Purpose Heat Source development: Safety Verification Test program

International Nuclear Information System (INIS)

Cull, T.A.; George, T.G.; Pavone, D.

1986-09-01

The General-Purpose Heat Source (GPHS) is a modular, radioisotope heat source that will be used in radioisotope thermoelectric generators (RTGs) to supply electric power for space missions. The first two uses will be the NASA Galileo and the ESA Ulysses missions. The RTG for these missions will contain 18 GPHS modules, each of which contains four 238 PuO 2 -fueled clads and generates 250 W/sub (t)/. A series of Safety Verification Tests (SVTs) was conducted to assess the ability of the GPHS modules to contain the plutonia in accident environments. Because a launch pad or postlaunch explosion of the Space Transportation System vehicle (space shuttle) is a conceivable accident, the SVT plan included a series of tests that simulated the overpressure exposure the RTG and GPHS modules could experience in such an event. Results of these tests, in which we used depleted UO 2 as a fuel simulant, suggest that exposure to overpressures as high as 15.2 MPa (2200 psi), without subsequent impact, does not result in a release of fuel

Protection of the lung from blast overpressure by stress wave decouplers, buffer plates or sandwich panels.

Science.gov (United States)

Sedman, Andrew; Hepper, A

2018-03-19

This paper outlines aspects of UK Ministry of Defence's research and development of blast overpressure protection technologies appropriate for use in body armour, with the aim of both propagating new knowledge and updating existing information. Two simple models are introduced not only to focus the description of the mechanism by which the lungs can be protected, but also to provide a bridge between fields of research that may hold the key to further advances in protection technology and related body armour. Protection can be provided to the lungs by decoupling the stress wave transmission into the thorax by managing the blast energy imparted through the protection system. It is proposed that the utility of the existing 'simple decoupler' blast overpressure protection is reviewed in light of recent developments in the treatment of those sustaining both overpressure and fragment injuries. It is anticipated that further advances in protection technology may be generated by those working in other fields on the analogous technologies of 'buffer plates' and 'sandwich panels'. © Crown copyright (2018), Dstl. This material is licensed under the terms of the Open Government Licence except where otherwise stated. To view this licence, visit http://www.nationalarchives.gov.uk/doc/open-government-licence/version/3 or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: psi@nationalarchives.gsi.gov.uk.

Analysis on the effect of risk from containment failure by over-pressurization during the operation of containment filtered venting system

International Nuclear Information System (INIS)

Ham, Jaehyun; Kang, Hyun Gook; Chang, Soon Heung

2015-01-01

Passive safety systems which are operated without power source are suggested as a solution SBO. For containment protection system, Containment Filtered Venting System (CFVS) is suggested. CFVS controls the containment pressure by releasing the containment gas through filter passively without any power source. But because still small amount of radioactive material have no choice but to release to the environment, starting time and operation method of CFVS have to be determined carefully. Later starting time brings not only lower release but also higher risk from containment failure by over-pressurization, so it is a problem. In this research, the effect of risk from containment failure by over-pressurization during the operation of containment filtered venting system was analyzed. In this research, optimized values for variables of the CFVS operation method are found as 0.67 MPa, 9 cm, 0.1 MPa each for open pressure, pressure interval, and vent pipe diameter when DF as a function of time and risk from containment over-pressurization failure are considered. Generally in this research, release without risk get lower values in higher pressure, and lower vent pipe diameter. Release with risk get sharply high values when the containment pressure exceeds the design pressure because of the effect of risk from containment failure by over-pressurization. In conclusion, highest pressure, and lowest vent pipe diameter which are not influenced by risk is the optimized values for CFVS operation method because amount of risk is much larger than release through the CFVS

Seismic chimneys in the Southern Viking Graben - Implications for palaeo fluid migration and overpressure evolution

Science.gov (United States)

Karstens, Jens; Berndt, Christian

2015-02-01

Detailed understanding of natural fluid migration systems is essential to minimize risks during hydrocarbon exploration and to evaluate the long-term efficiency of the subsurface storage of waste water and gas from hydrocarbon production as well as CO2. The Southern Viking Graben (SVG) hosts numerous focused fluid flow structures in the shallow (expressions of vertical fluid conduits are variously known as seismic chimneys or pipes. Seismic pipes are known to form large clusters. Seismic chimneys have so far been described as solitary structures. Here, we show that the study area in the SVG hosts more than 46 large-scale vertical chimney structures, which can be divided in three categories implying different formation processes. Our analysis reveals that seal-weakening, formation-wide overpressure and the presence of free gas are required to initiate the formation of vertical fluid conduits in the SVG. The presence of numerous vertical fluid conduits implies inter-stratigraphic hydraulic connectivity, which significantly affects the migration of fluids in the subsurface. Chimney structures are important for understanding the transfer of pore pressure anomalies to the shallow parts of the basin.

Large Steel Tank Fails and Rockets to Height of 30 meters − Rupture Disc Installed Incorrectly

OpenAIRE

Hedlund, Frank H.; Selig, Robert S.; Kragh, Eva K.

2016-01-01

At a brewery, the base plate-to-shell weld seam of a 90-m3 vertical cylindrical steel tank failed catastrophically. The 4 ton tank “took off” like a rocket leaving its contents behind, and landed on a van, crushing it. The top of the tank reached a height of 30 m. The internal overpressure responsible for the failure was an estimated 60 kPa. A rupture disc rated at <50 kPa provided overpressure protection and thus prevented the tank from being covered by the European Pressure Equipment Dir...

CFD Assessment of Forward Booster Separation Motor Ignition Overpressure on ET XT 718 Ice/Frost Ramp

Science.gov (United States)

Tejnil, Edward; Rogers, Stuart E.

2012-01-01

Computational fluid dynamics assessment of the forward booster separation motor ignition over-pressure was performed on the space shuttle external tank X(sub T) 718 ice/frost ramp using the flow solver OVERFLOW. The main objective of this study was the investigation of the over-pressure during solid rocket booster separation and its affect on the local pressure and air-load environments. Delta pressure and plume impingement were investigated as a possible contributing factor to the cause of the debris loss on shuttle missions STS-125 and STS-127. A simplified computational model of the Space Shuttle Launch Vehicle was developed consisting of just the external tank and the solid rocket boosters with separation motor nozzles and plumes. The simplified model was validated by comparison to full fidelity computational model of the Space Shuttle without the separation motors. Quasi steady-state plume solutions were used to calibrate the thrust of the separation motors. Time-accurate simulations of the firing of the booster-separation motors were performed. Parametric studies of the time-step size and the number of sub-iterations were used to find the best converged solution. The computed solutions were compared to previous OVERFLOW steady-state runs of the separation motors with reaction control system jets and to ground test data. The results indicated that delta pressure from the overpressure was small and within design limits, and thus was unlikely to have contributed to the foam losses.

Behaviour of concrete containment under over-pressure conditions

International Nuclear Information System (INIS)

Atchison, R.J.; Asmis, G.J.K.; Campbell, F.R.

1979-01-01

The Atomic Energy Control Board of Canada initiated June, 1975, a major study of the behaviour of concrete containment under over-pressure conditions. Although extensive theoretical and experimental work has been carried out for thick-walled Prestressed Concrete Reactor Vessels (PCRV's), there is a want of information on the non-linear response of thin-walled structures typical of the CANDU, 600 MW(e) cylindrical/spherical, post-tensioned containment shells. The purpose of this paper is to provide an overview of the total program, to present the reasons behind the research contract, and the specification and implementation of the work. The results of the theoretical and experimental work and their implications with respect to Canadian Concrete Containment practice are discussed. This study is unique, and, as far as is known, has no world-wide precedence. (orig.)

Blast overpressure after tire explosion: a fatal case.

Science.gov (United States)

Pomara, Cristoforo; D'Errico, Stefano; Riezzo, Irene; Perilli, Gabriela; Volpe, Umberto; Fineschi, Vittorio

2013-12-01

Fatal blast injuries are generally reported in literature as a consequence of the detonation of explosives in war settings. The pattern of lesion depends on the position of the victim in relation to the explosion, on whether the blast tracks through air or water, and whether it happens in the open air or within an enclosed space and the distance from the explosion. Tire explosion-related injuries are rarely reported in literature. This study presents a fatal case of blast overpressure due to the accidental explosion of a truck tire occurring in a tire repair shop. A multidisciplinary approach to the fatality involving forensic pathologists and engineers revealed that the accidental explosion, which caused a series of primary and tertiary blast wave injuries, was due to tire deterioration.

Prediction of sonic boom from experimental near-field overpressure data. Volume 2: Data base construction

Science.gov (United States)

Glatt, C. R.; Reiners, S. J.; Hague, D. S.

1975-01-01

A computerized method for storing, updating and augmenting experimentally determined overpressure signatures has been developed. A data base of pressure signatures for a shuttle type vehicle has been stored. The data base has been used for the prediction of sonic boom with the program described in Volume I.

Mechanical study of the Chartreuse Fold-and-Thrust Belt: relationships between fluids overpressure and decollement within the Toarcian source-rock

Science.gov (United States)

Berthelon, Josselin; Sassi, William; Burov, Evgueni

2016-04-01

Many source-rocks are shale and constitute potential detachment levels in Fold-and-Thrust Belts (FTB): the toarcian Schistes-Cartons in the French Chartreuse FTB for example. Their mechanical properties can change during their burial and thermal maturation, as for example when large amount of hydrocarbon fluids are generated. A structural reconstruction of the Chartreuse FTB geo-history places the Toarcian Formation as the major decollement horizon. In this work, a mechanical analysis integrating the fluids overpressuring development is proposed to discuss on the validity of the structural interpretation. At first, an analogue of the Chartreuse Toarcian Fm, the albanian Posidonia Schist, is documented as it can provide insights on its initial properties and composition of its kerogen content. Laboratory characterisation documents the vertical evolution of the mineralogical, geochemical and mechanical parameters of this potential decollement layer. These physical parameters (i.e. Total Organic Carbon (TOC), porosity/permeability relationship, friction coefficient) are used to address overpressure buildup in the frontal part of the Chartreuse FTB with TEMISFlow Arctem Basin modelling approach (Faille et al, 2014) and the structural emplacement of the Chartreuse thrust units using the FLAMAR thermo-mechanical model (Burov et al, 2014). The hydro-mechanical modeling results highlight the calendar, distribution and magnitude of the overpressure that developed within the source-rock in the footwall of a simple fault-bend fold structure localized in the frontal part of the Chartreuse FTB. Several key geological conditions are required to create an overpressure able to fracture the shale-rocks and induce a significant change in the rheological behaviour: high TOC, low permeability, favourable structural evolution. These models highlight the importance of modeling the impact of a diffuse natural hydraulic fracturing to explain fluids propagation toward the foreland within

The International Large Detector: Letter of Intent

OpenAIRE

Abe, Toshinori; Abernathy, Jason M.; Abramowicz, Halina; Adamus, Marek; Adeva, Bernardo; Afanaciev, Konstantin; Aguilar-Saavedra, Juan Antonio; Alabau Pons, Carmen; Albrecht, Hartwig; Andricek, Ladislav; Anduze, Marc; Aplin, Steve J.; Arai, Yasuo; Asano, Masaki; Attie, David

2010-01-01

The International Large Detector (ILD) is a concept for a detector at the International Linear Collider, ILC. The ILC will collide electrons and positrons at energies of initially 500 GeV, upgradeable to 1 TeV. The ILC has an ambitious physics program, which will extend and complement that of the Large Hadron Collider (LHC). A hallmark of physics at the ILC is precision. The clean initial state and the comparatively benign environment of a lepton collider are ideally suited to high precision ...

An Evaluation of the Compressive Properties of Helmet Pads Pre- and Post-Shock Wave Overpressure Exposure

Science.gov (United States)

2015-08-14

Regulation, Chapter IX. For Unclassified/Limited Distribution Documents: Destroy by any method that prevents disclosure of contents or reconstruction of...OVERPRESSURE WOUNDS AND INJURIES IMPACT STATIC TESTS PADS(CUSHIONS) TEST AND EVALUATION TRAUMA ...simplified version of the Facial and Ocular Countermeasure for Safety (FOCUS) headform. The FOCUS headform is commercially available through Humanetics

Groundwater Chemistry and Overpressure Evidences in Cerro Prieto Geothermal Field

Directory of Open Access Journals (Sweden)

Ivan Morales-Arredondo

2017-01-01

Full Text Available In order to understand the geological and hydrogeological processes influencing the hydrogeochemical behavior of the Cerro Prieto Geothermal Field (CP aquifer, Mexico, a characterization of the water samples collected from geothermal wells was carried out. Different hydrochemical diagrams were used to evaluate brine evolution of the aquifer. To determine pressure conditions at depth, a calculation was performed using hydrostatic and lithostatic properties from CP, considering geological characteristics of the study area, and theoretical information about some basin environments. Groundwater shows hydrogeochemical and geological evidences of the diagenetic evolution that indicate overpressure conditions. Some physical, chemical, textural, and mineralogical properties reported in the lithological column from CP are explained understanding the evolutionary process of the sedimentary material that composes the aquifer.

Bioeffects on an In Vitro Model by Small-Scale Explosives and Shock Wave Overpressure Impacts

Science.gov (United States)

2017-11-01

Many TBIs are associated with blast from improvised explosive devices.2–4 Explosions are physical, chemical , or nuclear reactions involving a rapid...ARL-TR-8210 ● NOV 2017 US Army Research Laboratory Bioeffects on an In Vitro Model by Small-Scale Explosives and Shock Wave...Research Laboratory Bioeffects on an In Vitro Model by Small-Scale Explosives and Shock Wave Overpressure Impacts by Nicole E Zander, Thuvan

Research on the water hammer protection of the long distance water supply project with the combined action of the air vessel and over-pressure relief valve

International Nuclear Information System (INIS)

Li, D D; Jiang, J; Zhao, Z; Yi, W S; Lan, G

2013-01-01

We take a concrete pumping station as an example in this paper. Through the calculation of water hammer protection with a specific pumping station water supply project, and the analysis of the principle, mathematical models and boundary conditions of air vessel and over-pressure relief valve we show that the air vessel can protect the water conveyance system and reduce the transient pressure damage due to various causes. Over-pressure relief valve can effectively reduce the water hammer because the water column re-bridge suddenly stops the pump and prevents pipeline burst. The paper indicates that the combination set of air vessel and over-pressure relief valve can greatly reduce the quantity of the air valve and can eliminate the water hammer phenomenon in the pipeline system due to the vaporization and water column separation and re-bridge. The conclusion could provide a reference for the water hammer protection of long-distance water supply system

Research on the water hammer protection of the long distance water supply project with the combined action of the air vessel and over-pressure relief valve

Science.gov (United States)

Li, D. D.; Jiang, J.; Zhao, Z.; Yi, W. S.; Lan, G.

2013-12-01

We take a concrete pumping station as an example in this paper. Through the calculation of water hammer protection with a specific pumping station water supply project, and the analysis of the principle, mathematical models and boundary conditions of air vessel and over-pressure relief valve we show that the air vessel can protect the water conveyance system and reduce the transient pressure damage due to various causes. Over-pressure relief valve can effectively reduce the water hammer because the water column re-bridge suddenly stops the pump and prevents pipeline burst. The paper indicates that the combination set of air vessel and over-pressure relief valve can greatly reduce the quantity of the air valve and can eliminate the water hammer phenomenon in the pipeline system due to the vaporization and water column separation and re-bridge. The conclusion could provide a reference for the water hammer protection of long-distance water supply system.

The role of salt tectonics and overburden in the generation of overpressure in the Dutch North Sea area

NARCIS (Netherlands)

Nelskamp, S.; Verweij, J.M.; Witmans, N.

2012-01-01

In this paper we study the effects of timing of salt movement and mechanical compaction on the generation of overpressures in Mesozoic rocks. To that end we apply 2D basin modelling on two N-S trending cross sections in the Dutch Central Graben and Terschelling Basin, respectively. Several

Overpressures: Causal Mechanisms, Conventional and Hydromechanical Approaches Surpressions : origine, approches conventionnelle et hydromécanique

Directory of Open Access Journals (Sweden)

Grauls D.

2006-12-01

Full Text Available Abnormal fluid pressure regimes are commonly encountered at depth in most sedimentary basins. Relationships between effective vertical stress and porosity have been applied, since 1970 to the Gulf Coast area, to assess the magnitude of overpressures. Positive results have been obtained from seismic and basin-modeling techniques in sand-shale, vertical-stress-dominated tertiary basins, whenever compaction disequilibrium conditions apply. However, overpressures resulting from other and/or additional causes (tectonic stress, hydrocarbon generation, thermal stress, fault-related transfer, hydrofracturing. . . cannot be quantitatively assessed using this approach. A hydromechanical approach is then proposed in addition to conventional methods. At any depth, the upper bound fluid pressure is controlled by in situ conditions related to hydrofracturing or fault reactivation. Fluid-driven fracturing implies an episodically open system, under a close to zerominimum effective stress regime. Sound knowledge of present-day tectonic stress regimes allows a direct estimation of minimum stress evolution. A quantitative fluid pressure assessment at depth is therefore possible, as in undrained or/and compartmented geological systems, pressure regimes, whatever their origin, tend to rapidly reach a value close to the minimum principal stress. Therefore, overpressure assessment will be improved, as this methodology can be applied to various geological settings and situations where present-day overpressures originated from other causal mechanisms, very often combined. However, pressure trends in transition zones are more difficult to assess correctly. Additional research on cap rocks and fault seals is therefore required to improve their predictability. In addition to overpressure assessment, the minimum principal stress concept allows a better understanding of petroleum system, as fault-related hydrocarbon dynamic transfers, hydrofractured domains and cap

Formation and destruction mechanism as well as major controlling factors of the Silurian shale gas overpressure in the Sichuan Basin, China

Directory of Open Access Journals (Sweden)

Shuangjian Li

2016-08-01

Full Text Available Taking the Well JY1 and Well PY1 in the Eastern Sichuan Basin as examples, the formation mechanism of shale gas overpressure was studied by using the cross plot of acoustic versus density logging data. During the processes of hydrocarbon generation and the uplifting, the pressure evolution of fluids in shale gas layers was reconstructed by fluid inclusions and PVTSIM software. The major factors controlling the evolution of shale gas overpressure were established according to the study of fracture, the timing of the uplifting, and episodes of tectonic deformation. Our results showed that the main mechanism of overpressure in the Silurian shale gas reservoirs in the Sichuan Basin was the fluid expansion, which was caused by hydrocarbon generation. Since the Yanshanian, the strata were uplifted and fluid pressure generally showed a decreasing trend. However, due to the low compression rebound ratio of shale gas reservoir rocks, poor connectivity of reservoir rocks, and low content of formation water and so on, such factors made fluid pressure decrease, but these would not be enough to make up the effects of strata erosion resulting in a further increase in fluid pressure in shale gas reservoirs during the whole uplifting processes. Since the Yanshanian, the Well PY1 zone had been reconstructed by at least three episodes of tectonic movement. The initial timing of the uplifting is 130 Ma. Compared to the former, the Well JY1 zone was firstly uplifted at 90 Ma, which was weakly reconstructed. As a result, low-angle fractures and few high resistance fractures developed in the Well JY1, while high-angle fractures and many high resistance fractures developed in the Well PY1. In totality, the factors controlling the overpressure preservation in shale gas reservoirs during the late periods include timing of late uplifting, superposition and reconstruction of stress fields, and development of high-angle fractures.

Analyses of a steel containment vessel with an outer contact structure under severe internal overpressurization conditions

International Nuclear Information System (INIS)

Porter, V.L.

1993-01-01

Many Mark-I and Mark-II BWR plants are designed with a steel vessel as the primary containment. Typically, the steel containment vessel (SCV) is enclosed within a reinforced concrete shield building with only a small gap (50--90mm) separating the two structures. This paper describes finite element analyses performed to evaluate the effects of contact and friction between a steel containment vessel and an outer contact structure when the containment vessel is subjected to large internal pressures. These computations were motivated by a joint program on containment integrity involving the Nuclear Power Engineering Corporation (NUPEC) of Japan, the US Nuclear Regulatory Commission (NRC), and Sandia National Laboratories for testing model containments

The use of HANDIDET reg-sign non-electric detonator assemblies to reduce blast-induced overpressure at AECL's Underground Research Laboratory

International Nuclear Information System (INIS)

Onagi, D.P.; Keith, S.G.; Kuzyk, G.W.

1996-01-01

A number of aspects of the Canadian concept for nuclear fuel waste disposal are being assessed by Atomic Energy of Canada Limited (AECL) in a series of experiments at its Underground Research Laboratory (URL) near Lac du Bonnet, Manitoba, Canada. One of the major objectives of the work being carried out at the URL is to develop and evaluate the methods and technology to ensure safe, permanent disposal of Canada's nuclear fuel waste. In 1994, AECL excavated access tunnels and a laboratory room for the Quarried Block Fracture Migration Experiment (QBFME) at the 240 Level of the URL. This facility will be used to study the transport of radionuclides in natural fractures in quarried blocks of granite under in-situ groundwater conditions. The experiment is being carried out under a cooperative agreement with the Japan Atomic Energy Research Institute. The excavation of the QBFME access tunnels and laboratory was carried out using controlled blasting techniques that minimized blast-induced overpressure which could have damaged or interrupted other ongoing experiments in the vicinity. The majority of the blasts used conventional long delay non-electric detonators but a number of blasts were carried out using HANDIDET 250/6000 non-electric long delay detonator assemblies and HTD reg-sign non-electric short delay trunkline detonator assemblies. The tunnel and laboratory excavation was monitored to determine the levels of blast-induced overpressure. This paper describes the blasting and monitoring results of the blasts using HANDIDET non-electric detonator assemblies and the effectiveness of these detonators in reducing blast-induced overpressure

Influence of overpressure on formation velocity evaluation of Neogene strata from the eastern Bengal Basin, Bangladesh

Science.gov (United States)

Zahid, Khandaker M.; Uddin, Ashraf

2005-06-01

Interpretation of sonic log data of anticlinal structures from eastern Bangladesh reveals significant variations of acoustic velocity of subsurface strata. The amount of variation in velocity is 32% from Miocene to Pliocene stratigraphic units in Titas and Bakhrabad structure, whereas 21% in Rashidpur structure. Velocity fluctuations are influenced by the presence of gas-bearing horizons, with velocities of gas-producing strata 3-7% lower than laterally equivalent strata at similar depth. Average velocities of Miocene Boka Bil and Bhuban formations are, respectively, 2630 and 3480 m/s at Titas structure; 2820 and 3750 m/s at Bakhrabad; and 3430 and 3843 m/s at the Rashidpur structure. From the overall velocity-depth distribution for a common depth range of 915-3000 m, the Titas, Bakhrabad and Rashidpur structures show a gradual increase in velocity with depth. In contrast, the Sitakund anticline in SE Bangladesh reveals a decrease in velocity with depth from 3000 to 4000 m, probably due to the presence of overpressured mudrocks of the Bhuban Formation. Tectonic compression, associated with the Indo-Burmese plate convergence likely contributed the most toward formation of subsurface overpressure in the Sitakund structure situated in the Chittagong-Tripura Fold Belt of the eastern Bengal basin, Bangladesh.

Large Steel Tank Fails and Rockets to Height of 30 meters - Rupture Disc Installed Incorrectly

DEFF Research Database (Denmark)

Hedlund, Frank Huess; Selig, Robert Simon; Kragh, Eva K.

2016-01-01

At a brewery, the base plate-to-shell weld seam of a 90-m3 vertical cylindrical steel tank failed catastrophically. The 4 ton tank “took off” like a rocket leaving its contents behind, and landed on a van, crushing it. The top of the tank reached a height of 30 m. The internal overpressure...

Baffle-former arrangement for nuclear reactor vessel internals

International Nuclear Information System (INIS)

Machado, O.J.; Berringer, R.T.

1978-01-01

A baffle-former arrangement for the reactor vessel internals of a nuclear reactor is described. The arrangement includes positioning of formers at the same elevations as the fuel assembly grids, and positioning flow holes in the baffle plates directly beneath selected former grid elevations. The arrangement reduces detrimental cross flows, maintains proper core barrel and baffle temperatures, and alleviates the potential of overpressurization within the baffle-former assembly under assumed major accident conditions

Methods for large-scale international studies on ICT in education

NARCIS (Netherlands)

Pelgrum, W.J.; Plomp, T.; Voogt, Joke; Knezek, G.A.

2008-01-01

International comparative assessment is a research method applied for describing and analyzing educational processes and outcomes. They are used to ‘describe the status quo’ in educational systems from an international comparative perspective. This chapter reviews different large scale international

FLAME facility: The effect of obstacles and transverse venting on flame acceleration and transition on detonation for hydrogen-air mixtures at large scale

International Nuclear Information System (INIS)

Sherman, M.P.; Tieszen, S.R.; Benedick, W.B.

1989-04-01

This report describes research on flame acceleration and deflagration-to-detonation transition (DDT) for hydrogen-air mixtures carried out in the FLAME facility, and describes its relevance to nuclear reactor safety. Flame acceleration and DDT can generate high peak pressures that may cause failure of containment. FLAME is a large rectangular channel 30.5 m long, 2.44 m high, and 1.83 m wide. It is closed on the ignition end and open on the far end. The three test variables were hydrogen mole fraction (12--30%), degree of transverse venting (by moving steel top plates---0%, 13%, and 50%), and the absence or presence of certain obstacles in the channel (zero or 33% blockage ratio). The most important variable was the hydrogen mole fraction. The presence of the obstacles tested greatly increased the flame speeds, overpressures, and tendency for DDT compared to similar tests without obstacles. Different obstacle configurations could have greater or lesser effects on flame acceleration and DDT. Large degrees of transverse venting reduced the flame speeds, overpressures, and possibility of DDT. For small degrees of transverse venting (13% top venting), the flame speeds and overpressures were higher than for no transverse venting with reactive mixtures (>18% H 2 ), but they were lower with leaner mixtures. The effect of the turbulence generated by the flow out the vents on increasing flame speed can be larger than the effect of venting gas out of the channel and hence reducing the overpressure. With no obstacles and 50% top venting, the flame speeds and overpressures were low, and there was no DDT. For all other cases, DDT was observed above some threshold hydrogen concentration. DDT was obtained at 15% H 2 with obstacles and no transverse venting. 67 refs., 62 figs

Design and fabrication of a 30 T superconducting solenoid using overpressure processed Bi2212 round wire

Energy Technology Data Exchange (ETDEWEB)

Flanagan, Gene [Muons, Inc., Batavia, IL (United States); Johnson, Rolland [Muons, Inc., Batavia, IL (United States)

2016-02-18

High field superconducting magnets are used in particle colliders, fusion energy devices, and spectrometers for medical imaging and advanced materials research. Magnets capable of generating fields of 20-30 T are needed by future accelerator facilities. A 20-30 T magnet will require the use of high-temperature superconductors (HTS) and therefore the challenges of high field HTS magnet development need to be addressed. Superconducting Bi₂Sr₂CaCu₂O_x (Bi2212) conductors fabricated by the oxide-powder-in-tube (OPIT) technique have demonstrated the capability to carry large critical current density of 10⁵ A/cm² at 4.2 K and in magnetic fields up to 45 T. Available in round wire multi-filamentary form, Bi2212 may allow fabrication of 20-50 T superconducting magnets. Until recently the performance of Bi2212 has been limited by challenges in realizing high current densities (J_c ) in long lengths. This problem now is solved by the National High Magnetic Field Lab using an overpressure (OP) processing technique, which uses external pressure to process the conductor. OP processing also helps remove the ceramic leakage that results when Bi-2212 liquid leaks out from the sheath material and reacts with insulation, coil forms, and flanges. Significant advances have also been achieved in developing novel insulation materials (TiO₂ coating) and Ag-Al sheath materials that have higher mechanical strengths than Ag-0.2wt.% Mg, developing heat treatment approaches to broadening the maximum process temperature window, and developing high-strength, mechanical reinforced Bi-2212 cables. In the Phase I work, we leveraged these new opportunities to prototype overpressure processed solenoids and test them in background fields of up to 14 T. Additionally a design of a fully superconducting 30 T solenoid was produced. This work in conjunction with the future path outlined in the Phase II proposal would

The use of HANDIDET{reg_sign} non-electric detonator assemblies to reduce blast-induced overpressure at AECL`s Underground Research Laboratory

Energy Technology Data Exchange (ETDEWEB)

Onagi, D.P.; Keith, S.G.; Kuzyk, G.W. [AECL, Pinawa, Manitoba (Canada). Underground Research Lab.; Proudfoot, D.F. [ICI Explosives Canada, North Delta, British Columbia (Canada)

1996-12-01

A number of aspects of the Canadian concept for nuclear fuel waste disposal are being assessed by Atomic Energy of Canada Limited (AECL) in a series of experiments at its Underground Research Laboratory (URL) near Lac du Bonnet, Manitoba, Canada. One of the major objectives of the work being carried out at the URL is to develop and evaluate the methods and technology to ensure safe, permanent disposal of Canada`s nuclear fuel waste. In 1994, AECL excavated access tunnels and a laboratory room for the Quarried Block Fracture Migration Experiment (QBFME) at the 240 Level of the URL. This facility will be used to study the transport of radionuclides in natural fractures in quarried blocks of granite under in-situ groundwater conditions. The experiment is being carried out under a cooperative agreement with the Japan Atomic Energy Research Institute. The excavation of the QBFME access tunnels and laboratory was carried out using controlled blasting techniques that minimized blast-induced overpressure which could have damaged or interrupted other ongoing experiments in the vicinity. The majority of the blasts used conventional long delay non-electric detonators but a number of blasts were carried out using HANDIDET 250/6000 non-electric long delay detonator assemblies and HTD{reg_sign} non-electric short delay trunkline detonator assemblies. The tunnel and laboratory excavation was monitored to determine the levels of blast-induced overpressure. This paper describes the blasting and monitoring results of the blasts using HANDIDET non-electric detonator assemblies and the effectiveness of these detonators in reducing blast-induced overpressure.

Risk reduction by filtered venting in PWR large dry-containments

International Nuclear Information System (INIS)

Gazzillo, F.; Kastenberg, W.E.

1984-01-01

The potential risk reduction associated with a Filtered-Vented Containment System is evaluated. A low-volume venting strategy has been considered and data referring to the Zion power plant, along with the results of the Zion Probabilistic Safety Study, have been used. An estimate of the reduction factor is first made for a single core melt accident sequence whose containment failure mode is late overpressure. The result, interpreted as a reduction factor applicable to the release category associated with containment late overpressure is then used for the estimation of the overall risk reduction factor. In particular, the case of internal and external risk for the Zion power plant are considered. Because the contribution from seismic events dominates the overall risk, the importance of different assumptions for seismic fragility is also assessed. Finally an uncertainty analysis of the risk reduction factor for a single accident sequence is performed. An estimate is also obtained on the level of confidence with which certain required values of risk reduction can be achieved. (orig.)

Statistics of peak overpressure and shock steepness for linear and nonlinear N-wave propagation in a kinematic turbulence.

Science.gov (United States)

Yuldashev, Petr V; Ollivier, Sébastien; Karzova, Maria M; Khokhlova, Vera A; Blanc-Benon, Philippe

2017-12-01

Linear and nonlinear propagation of high amplitude acoustic pulses through a turbulent layer in air is investigated using a two-dimensional KZK-type (Khokhlov-Zabolotskaya-Kuznetsov) equation. Initial waves are symmetrical N-waves with shock fronts of finite width. A modified von Kármán spectrum model is used to generate random wind velocity fluctuations associated with the turbulence. Physical parameters in simulations correspond to previous laboratory scale experiments where N-waves with 1.4 cm wavelength propagated through a turbulence layer with the outer scale of about 16 cm. Mean value and standard deviation of peak overpressure and shock steepness, as well as cumulative probabilities to observe amplified peak overpressure and shock steepness, are analyzed. Nonlinear propagation effects are shown to enhance pressure level in random foci for moderate initial amplitudes of N-waves thus increasing the probability to observe highly peaked waveforms. Saturation of the pressure level is observed for stronger nonlinear effects. It is shown that in the linear propagation regime, the turbulence mainly leads to the smearing of shock fronts, thus decreasing the probability to observe high values of steepness, whereas nonlinear effects dramatically increase the probability to observe steep shocks.

The International Large Detector: Letter of Intent

CERN Document Server

Abe, Toshinori; Abramowicz, Halina; Adamus, Marek; Adeva, Bernardo; Afanaciev, Konstantin; Aguilar-Saavedra, Juan Antonio; Alabau Pons, Carmen; Albrecht, Hartwig; Andricek, Ladislav; Anduze, Marc; Aplin, Steve J.; Arai, Yasuo; Asano, Masaki; Attie, David; Attree, Derek J.; Burger, Jochen; Bailey, David; Balbuena, Juan Pablo; Ball, Markus; Ballin, James; Barbi, Mauricio; Barlow, Roger; Bartels, Christoph; Bartsch, Valeria; Bassignana, Daniela; Bates, Richard; Baudot, Jerome; Bechtle, Philip; Beck, Jeannine; Beckmann, Moritz; Bedjidian, Marc; Behnke, Ties; Belkadhi, Khaled; Bellerive, Alain; Bentvelsen, Stan; Bergauer, Thomas; Berggren, C.Mikael U.; Bergholz, Matthias; Bernreuther, Werner; Besancon, Marc; Besson, Auguste; Bhattacharya, Sudeb; Bhuyan, Bipul; Biebel, Otmar; Bilki, Burak; Blair, Grahame; Blumlein, Johannes; Bo, Li; Boisvert, Veronique; Bondar, A.; Bonvicini, Giovanni; Boos, Eduard; Boudry, Vincent; Bouquet, Bernard; Bouvier, Joel; Bozovic-Jelisavcic, Ivanka; Brient, Jean-Claude; Brock, Ian; Brogna, Andrea; Buchholz, Peter; Buesser, Karsten; Bulgheroni, Antonio; Butler, John; Buttar, Craig; Buzulutskov, A.F.; Caccia, Massimo; Caiazza, Stefano; Calcaterra, Alessandro; Caldwell, Allen; Callier, Stephane L.C.; Calvo Alamillo, Enrique; Campbell, Michael; Campbell, Alan J.; Cappellini, Chiara; Carloganu, Cristina; Castro, Nuno; Castro Carballo, Maria Elena; Chadeeva, Marina; Chakraborty, Dhiman; Chang, Paoti; Charpy, Alexandre; Chen, Xun; Chen, Shaomin; Chen, Hongfang; Cheon, Byunggu; Choi, Suyong; Choudhary, B.C.; Christen, Sandra; Ciborowski, Jacek; Ciobanu, Catalin; Claus, Gilles; Clerc, Catherine; Coca, Cornelia; Colas, Paul; Colijn, Auke; Colledani, Claude; Combaret, Christophe; Cornat, Remi; Cornebise, Patrick; Corriveau, Francois; Cvach, Jaroslav; Czakon, Michal; D'Ascenzo, Nicola; Da Silva, Wilfrid; Dadoun, Olivier; Dam, Mogens; Damerell, Chris; Danilov, Mikhail; Daniluk, Witold; Daubard, Guillaume; David, Dorte; David, Jacques; De Boer, Wim; De Groot, Nicolo; De Jong, Sijbrand; De Jong, Paul; De La Taille, Christophe; De Masi, Rita; De Roeck, Albert; Decotigny, David; Dehmelt, Klaus; Delagnes, Eric; Deng, Zhi; Desch, Klaus; Dieguez, Angel; Diener, Ralf; Dima, Mihai-Octavian; Dissertori, Gunther; Dixit, Madhu S.; Dolezal, Zdenek; Dolgoshein, Boris A.; Dollan, Ralph; Dorokhov, Andrei; Doublet, Philippe; Doyle, Tony; Doziere, Guy; Dragicevic, Marko; Drasal, Zbynek; Drugakov, Vladimir; Duarte Campderros, Jordi; Dulucq, Frederic; Dumitru, Laurentiu Alexandru; Dzahini, Daniel; Eberl, Helmut; Eckerlin, Guenter; Ehrenfeld, Wolfgang; Eigen, Gerald; Eklund, Lars; Elsen, Eckhard; Elsener, Konrad; Emeliantchik, Igor; Engels, Jan; Evrard, Christophe; Fabbri, Riccardo; Faber, Gerard; Faucci Giannelli, Michele; Faus-Golfe, Angeles; Feege, Nils; Feng, Cunfeng; Ferencei, Jozef; Fernandez Garcia, Marcos; Filthaut, Frank; Fleck, Ivor; Fleischer, Manfred; Fleta, Celeste; Fleury, Julien L.; Fontaine, Jean-Charles; Foster, Brian; Fourches, Nicolas; Fouz, Mary-Cruz; Frank, Sebastian; Frey, Ariane; Frotin, Mickael; Fujii, Hirofumi; Fujii, Keisuke; Fujimoto, Junpei; Fujita, Yowichi; Fusayasu, Takahiro; Fuster, Juan; Gaddi, Andrea; Gaede, Frank; Galkin, Alexei; Galkin, Valery; Gallas, Abraham; Gallin-Martel, Laurent; Gamba, Diego; Gao, Yuanning; Garrido Beltran, Lluis; Garutti, Erika; Gastaldi, Franck; Gaur, Bakul; Gay, Pascal; Gellrich, Andreas; Genat, Jean-Francois; Gentile, Simonetta; Gerwig, Hubert; Gibbons, Lawrence; Ginina, Elena; Giraud, Julien; Giraudo, Giuseppe; Gladilin, Leonid; Goldstein, Joel; Gonzalez Sanchez, Francisco Javier; Gournaris, Filimon; Greenshaw, Tim; Greenwood, Z.D.; Grefe, Christian; Gregor, Ingrid-Maria; Grenier, Gerald Jean; Gris, Philippe; Grondin, Denis; Grunewald, Martin; Grzelak, Grzegorz; Gurtu, Atul; Haas, Tobias; Haensel, Stephan; Hajdu, Csaba; Hallermann, Lea; Han, Liang; Hansen, Peter H.; Hara, Takanori; Harder, Kristian; Hartin, Anthony; Haruyama, Tomiyoshi; Harz, Martin; Hasegawa, Yoji; Hauschild, Michael; He, Qing; Hedberg, Vincent; Hedin, David; Heinze, Isa; Helebrant, Christian; Henschel, Hans; Hensel, Carsten; Hertenberger, Ralf; Herve, Alain; Higuchi, Takeo; Himmi, Abdelkader; Hironori, Kazurayama; Hlucha, Hana; Hommels, Bart; Horii, Yasuyuki; Horvath, Dezso; Hostachy, Jean-Yves; Hou, Wei-Shu; Hu-Guo, Christine; Huang, Xingtao; Huppert, Jean Francois; Ide, Yasuhiro; Idzik, Marek; Iglesias Escudero, Carmen; Ignatenko, Alexandr; Igonkina, Olga; Ikeda, Hirokazu; Ikematsu, Katsumasa; Ikemoto, Yukiko; Ikuno, Toshinori; Imbault, Didier; Imhof, Andreas; Imhoff, Marc; Ingbir, Ronen; Inoue, Eiji; Ioannis, Giomataris; Ishikawa, Akimasa; Itagaki, Kennosuke; Ito, Kazutoshi; Itoh, Hideo; Iwabuchi, Masaya; Iwai, Go; Iwamoto, Toshiyuki; Jacosalem, Editha P.; Jaramillo Echeverria, Richard; Jeans, Daniel T D.; Jing, Fanfan; Jing, Ge; Jokic, Stevan; Jonsson, Leif; Jore, Matthieu; Jovin, Tatjana; Kafer, Daniela; Kajino, Fumiyoshi; Kamai, Yusuke; Kaminski, Jochen; Kamiya, Yoshio; Kaplan, Alexander; Kapusta, Frederic; Kar, Deepak; Karlen, Dean; Katayama, Nobu; Kato, Eriko; Kato, Yukihiro; Kaukher, Alexander; Kawagoe, Kiyotomo; Kawahara, Hiroki; Kawai, Masanori; Kawasaki, Takeo; Khan, Sameen Ahmed; Kieffer, Robert; Kielar, Eryk; Kiesenhofer, Wolfgang; Kiesling, Christian M.; Killenberg, Martin; Kim, Donghee; Kim, Choong Sun; Kim, Guinyun; Kim, Hong Joo; Kim, Eun-Joo; Kim, Hyunok; Kim, Shinhong; Kircher, Francois; Kisielewska, Danuta; Kleinwort, Claus; Klimkovich, Tatsiana; Kluge, Hanna; Kluit, Peter Martin; Kobayashi, Makoto; Kobel, Michael; Kodama, Hideyo; Kodys, Peter; Koetz, U.; Koffeman, Els; Kohriki, Takashi; Komamiya, Sachio; Kondou, Yoshinari; Korbel, Volker; Kotera, Katsushige; Krucker, Dirk; Kraml, Sabine; Krammer, Manfred; Krastev, Kaloyan; Krause, Bernward; Krautscheid, Thorsten; Kschioneck, Kirsten; Kuang, Yu-Ping; Kuhlmann, Jan; Kuroiwa, Hirotoshi; Kusano, Tomonori; Kvasnicka, Peter; Lacasta Llacer, Carlos; Lagorio, Eric; Laktineh, Imad; Lange, Wolfgang; Lebrun, Patrice; Lee, Jik; Lehner, Frank; Lesiak, Tadeusz; Levy, Aharon; Li, Bo; Li, Ting; Li, Yulan; Li, Hengne; Liang, Zuotang; Lima, Guilherme; Linde, Frank; Linssen, Lucie; Linzmaier, Diana; List, Benno; List, Jenny; Liu, Bo; Llopart Cudie, Xavier; Lohmann, Wolfgang; Lopez Virto, Amparo; Lozano, Manuel; Lu, Shaojun; Lucaci-Timoce, Angela Isabela; Lumb, Nick; Lundberg, Bjorn; Lutz, Pierre; Lutz, Benjamin; Lux, Thorsten; Luzniak, Pawel; Lyapin, Alexey; Ma, Wengan; Maczewski, Lukasz; Mader, Wolfgang F.; Maity, Manas; Majumdar, Nayana; Majumder, Gobinda; Maki, Akihiro; Makida, Yasuhiro; Mamuzic, Judita; Marc, Dhellot; Marchesini, Ivan; Marcisovsky, Michal; Marias, Carlos; Marshall, John; Martens, Cornelius; Martin, Victoria J.; Martin, Jean-Pierre; Martin-Chassard, Gisele; Martinez Rivero, Celso; Martyn, Hans-Ulrich; Mathez, Herve; Mathieu, Antoine; Matsuda, Takeshi; Matsunaga, Hiroyuki; Matsushita, Takashi; Mavromanolakis, Georgios; Mcdonald, Kirk T.; Mereu, Paolo; Merk, Marcel; Merkin, Mikhail M.; Meyer, Niels; Meyners, Norbert; Mihara, Satoshi; Miller, David J.; Miller, Owen; Mitaroff, Winfried A.; Miyamoto, Akiya; Miyata, Hitoshi; Mjornmark, Ulf; Mnich, Joachim; Monig, Klaus; Moll, Andreas; Moortgat-Pick, Gudrid A.; Mora De Freitas, Paulo; Morel, Frederic; Moretti, Stefano; Morgunov, Vasily; Mori, Toshinori; Mori, Takashi; Morin, Laurent; Morozov, Sergey; Moser, Hans-Gunther; Moser, Fabian; Moya, David; Mudrinic, Mihajlo; Mukhopadhyay, Supratik; Murakami, Takeshi; Musa, Luciano; Musat, Gabriel; Nagamine, Tadashi; Nakamura, Isamu; Nakano, Eiichi; Nakashima, Kenichi; Nakayoshi, Kazuo; Nakazawa, Hideyuki; Nam, Shinwoo; Nam, Jiwoo; Nemecek, Stanislav; Niebuhr, Carsten; Niechciol, Marcus; Niezurawski, Piotr; Nishida, Shohei; Nishiyama, Miho; Nitoh, Osamu; Norbeck, Ed; Nozaki, Mitsuaki; O'Shea, Val; Ohlerich, Martin; Okada, Nobuchika; Olchevski, Alexander; Olivier, Bob; Oliwa, Krzysztof; Omori, Tsunehiko; Onel, Yasar; Ono, Hiroaki; Ono, Yoshimasa; Onuki, Yoshiyuki; Ootani, Wataru; Orava, Risto; Orlandea, Marius Ciprian; Oskarsson, Anders; Osland, Per; Ossetski, Dmitri; Osterman, Lennart; Padilla, Cristobal; Pandurovic, Mila; Park, Il Hung; Park, Hwanbae; Parkes, Chris; Patrick, Ghislain; Patterson, J.Ritchie; Pawlik, Bogdan; Pellegrini, Giulio; Pellegrino, Antonio; Peterson, Daniel; Petrov, Alexander; Pham, Thanh Hung; Piccolo, Marcello; Poeschl, Roman; Polak, Ivo; Popova, Elena; Postranecky, Martin; Prahl, Volker; Prudent, Xavier; Przysiezniak, Helenka; Puerta-Pelayo, Jesus; Qian, Wenbin; Quadt, Arnulf; Rarbi, Fatah-Ellah; Raspereza, Alexei; Ratti, Lodovico; Raux, Ludovic; Raven, Gerhard; Re, Valerio; Regler, Meinhard; Reinhard, Marcel; Renz, Uwe; Repain, Philippe; Repond, Jose; Richard, Francois; Riemann, Sabine; Riemann, Tord; Riera-Babures, Jordi; Riu, Imma; Robert, Kieffer; Robson, Aidan; Roloff, Philipp; Rosca, Aura; Rosemann, Christoph; Rosiek, Janusz; Rossmanith, Robert; Roth, Stefan; Royon, Christophe; Ruan, Manqi; Ruiz-Jimeno, Alberto; Rusinov, Vladimir; Ruzicka, Pavel; Ryzhikov, Dmitri; Saborido, Juan J.; Sadeh, Iftach; Sailer, Andre; Saito, Masatoshi; Sakuma, Takayuki; Sanami, Toshiya; Sanuki, Tomoyuki; Sarkar, Sandip; Sasaki, Rei; Sato, Yutaro; Saveliev, Valeri; Savoy-Navarro, Aurore; Sawyer, Lee; Schafer, Oliver; Schalicke, Andreas; Schuler, K.Peter; Schade, Peter; Schaffran, Joern; Scheirich, Jan; Schlatter, Dieter; Schmidt, Ringo Sebastian; Schmitt, Sebastian; Schneekloth, Uwe; Schreiber, Heinz Juergen; Schultz-Coulon, Hans-Christian; Schumacher, Markus; Schumm, Bruce A.; Schuwalow, Sergej; Schwierz, Rainer; Sefkow, Felix; Sefri, Rachid; Seguin-Moreau, Nathalie; Seidel, Katja; Sekaric, Jadranka; Sendai, Hiroshi; Settles, Ronald Dean; Shao, Ming; Shechtman, L.I.; Shimazaki, Shoichi; Shumeiko, Nikolai; Sicho, Petr; Simon, Frank; Sinram, Klaus; Smiljanic, Ivan; Smiljkovic, Nebojsa; Smolik, Jan; Sobloher, Blanka; Soldner, Christian; Song, Kezhu; Sopczak, Andre; Speckmayer, Peter; Stenlund, Evert; Stockinger, Dominik; Stoeck, Holger; Strohmer, Raimund; Straessner, Arno; Stromhagen, Richard; Sudo, Yuji; Suehara, Taikan; Suekane, Fumihiko; Suetsugu, Yusuke; Sugimoto, Yasuhiro; Sugiyama, Akira; Sumisawa, Kazutaka; Suzuki, Shiro; Swientek, Krzysztof; Tabassam, Hajrah; Takahashi, Tohru; Takeda, Hiroshi; Takeshita, Tohru; Takubo, Yosuke; Tanabe, Tomohiko; Tanaka, Shuji; Tanaka, Ken-Ichi; Tanaka, Manobu; Tapprogge, Stefan; Tarkovsky, Evgueny I.; Tauchi, Toshiaki; Tauchi, Kazuya; Telnov, Valery I.; Teodorescu, Eliza; Thomson, Mark; Tian, Junping; Timmermans, Jan; Titov, Maxim P.; Tokushuku, Katsuo; Tozuka, Shunsuke; Tsuboyama, Toru; Ueno, Koji; Ullan, Miguel; Uozumi, Satoru; Urakawa, Junji; Ushakov, Andriy; Ushiroda, Yutaka; Valentan, Manfred; Valin, Isabelle; Van Der Graaf, Harry; Van Doren, Brian; Van Kooten, Rick J.; Vander Donckt, Muriel; Vanel, Jean-Charles; Vazquez Regueiro, Pablo; Verzocchi, Marco; Vescovi, Christophe; Videau, Henri L.; Vila, Ivan; Vilasis-Cardona, Xavier; Vogel, Adrian; Volkenborn, Robert; Vos, Marcel; Voutsinas, Yorgos; Vrba, Vaclav; Vreeswijk, Marcel; Walsh, Roberval; Waltenberger, Wolfgang; Wang, Min-Zu; Wang, Yi; Wang, Xiaoliang; Wang, Qun; Wang, Meng; Ward, David R.; Warren, Matthew; Watanabe, Minori; Watanabe, Takashi; Watson, Nigel K.; Wattimena, Nanda; Wendt, Oliver; Wermes, Norbert; Weuste, Lars; Wichmann, Katarzyna; Wienemann, Peter; Wierba, Wojciech; Wilson, Graham W.; Wilson, John A.; Wing, Matthew; Winter, Marc; Wobisch, Markus; Worek, Malgorzata; Xella, Stefania; Xu, Zizong; Yamaguchi, Akira; Yamaguchi, Hiroshi; Yamamoto, Hitoshi; Yamaoka, Hiroshi; Yamashita, Satoru; Yamauchi, M.; Yamazaki, Yuji; Yamouni, Mahfoud; Yan, Wenbiao; Yanagida, Koji; Yang, Haijun; Yang, Jongmann; Yang, Jin Min; Yang, Zhenwei; Yasu, Yoshiji; Yonamine, Ryo; Yoshida, Kohei; Yoshida, Takuo; Yoshioka, Tamaki; Yu, Chunxu; Yu, Intae; Yue, Qian; Zacek, Josef; Zalesak, Jaroslav; Zarnecki, Aleksander Filip; Zawiejski, Leszek; Zeitnitz, Christian; Zerwas, Dirk; Zeuner, Wolfram; Zhang, Yanxi; Zhang, Ziping; Zhang, Renyou; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Jiawei; Zhao, Zhengguo; Zheng, Baojun; Zhong, Liang; Zhou, Yongzhao; Zhu, Xianglei; Zhu, Chengguang; Zomer, Fabian; Zutshi, Vishnu

2010-01-01

The International Large Detector (ILD) is a concept for a detector at the International Linear Collider, ILC. The ILC will collide electrons and positrons at energies of initially 500 GeV, upgradeable to 1 TeV. The ILC has an ambitious physics program, which will extend and complement that of the Large Hadron Collider (LHC). A hallmark of physics at the ILC is precision. The clean initial state and the comparatively benign environment of a lepton collider are ideally suited to high precision measurements. To take full advantage of the physics potential of ILC places great demands on the detector performance. The design of ILD is driven by these requirements. Excellent calorimetry and tracking are combined to obtain the best possible overall event reconstruction, including the capability to reconstruct individual particles within jets for particle ow calorimetry. This requires excellent spatial resolution for all detector systems. A highly granular calorimeter system is combined with a central tracker which st...

Liquefied extinguishing agent discharge to an overpressure-sensitive enclosed volume

Directory of Open Access Journals (Sweden)

Hurda Lukáš

2018-01-01

Full Text Available The throttling of liquefied substances from high pressure vessels to an enclosed volume starting at atmospheric pressure is described in order to determine thermodynamic state of the extinguished room gaseous contents. Time dependent, 0D mathematical model is implemented describing the state inside the agent container, the isenthalpic throttling in the distribution system, agent vaporization and mixing with air. The agent is modelled as real gas. Other influences on the process including the heat transfer from selected solid parts inside the room and the gas mixture leakage out of the room are taken into account. Main outcome is an MS Excel tool for integrated fire extinguishers design optimization. The optimization balances the two contradictory requirements: Agent volumetric concentration to sustain the fire extinguishing capabilities and tolerable room overpressure. Agent fill weight and discharge time are being adjusted. The discharge time is controlled by the distribution piping and spray nozzles design. System operation is checked concerning various initial and boundary conditions.

Productive international collaboration in the large coil task

International Nuclear Information System (INIS)

Haubenreich, P.N.; Komarek, P.; Shimamoto, S.; Vecsey, G.

1987-01-01

The Large Coil Task (LCT), initiated in 1977, has been very productive of useful technical information about superconducting toroidal field (TF) coil design and manufacture. Moreover, it has demonstrated close international collaboration in fusion technology development, including integration of large components built in four different countries. Each of six 40-t test coils was designed and produced by a major industrial team, with government laboratory guidance, to a common set of specifications. The six were assembled into a toroidal array for testing in the International Fusion Superconducting Magnet Test Facility (IFSMTF) at Oak Ridge. Testing was done by a team of representatives of EURATOM, Japan, Switzerland, and the United States, with each participant having full access to all data. Coils were thoroughly instrumented, enabling penetrating analysis of behavior

Glacially-derived overpressure in the northeastern Alaskan subduction zone: combined tomographic and morphometric analysis of shallow sediments on the Yakutat shelf and slope, Gulf of Alaska

Science.gov (United States)

Clary, W. A.; Worthington, L. L.; Scuderi, L. A.; Daigle, H.; Swartz, J. M.

2017-12-01

suggest a spatial relationship between the extent of U-shaped profiles and low-velocity shallow sediments. Towards the SE end of the model we observe a large overlap of U-shaped indices, and a shallow low-velocity zone in the mapped extent of the last glacial maximum suggestive of overpressure due to loading by ice sheet activity.

Experimental study of the overpressures generated by the detonation of spherical air-hydrocarbon gaseous mixtures

International Nuclear Information System (INIS)

Brossard, J.

1978-01-01

The characteristics of the pressure waves transmitted by detonation of gaseous mixtures to the surrounding air were measured by tests made near the ground level in 1 to 54 m 3 spherical balloons containing air-acetylene or air-ethylene mixtures. As concerns the peak overpressure Δp, a theoretical dimensional analysis in accordance with the experimental results shows that Δp can be expressed as a function of two independent variables, which are the radial distance R and the volume V of the balloon . A semi-empirical formula, including ground effects, is proposed and its present validity range is given. (author)

Optimizing Blasting’s Air Overpressure Prediction Model using Swarm Intelligence

Science.gov (United States)

Nur Asmawisham Alel, Mohd; Ruben Anak Upom, Mark; Asnida Abdullah, Rini; Hazreek Zainal Abidin, Mohd

2018-04-01

Air overpressure (AOp) resulting from blasting can cause damage and nuisance to nearby civilians. Thus, it is important to be able to predict AOp accurately. In this study, 8 different Artificial Neural Network (ANN) were developed for the purpose of prediction of AOp. The ANN models were trained using different variants of Particle Swarm Optimization (PSO) algorithm. AOp predictions were also made using an empirical equation, as suggested by United States Bureau of Mines (USBM), to serve as a benchmark. In order to develop the models, 76 blasting operations in Hulu Langat were investigated. All the ANN models were found to outperform the USBM equation in three performance metrics; root mean square error (RMSE), mean absolute percentage error (MAPE) and coefficient of determination (R2). Using a performance ranking method, MSO-Rand-Mut was determined to be the best prediction model for AOp with a performance metric of RMSE=2.18, MAPE=1.73% and R2=0.97. The result shows that ANN models trained using PSO are capable of predicting AOp with great accuracy.

Comparison of under-pressure and over-pressure pulse tests conducted in low-permeability basalt horizons at the Hanford Site, Washington State

International Nuclear Information System (INIS)

Thorne, P.D.; Spane, F.A. Jr.

1984-10-01

Over-pressure pulse tests (pressurized slug tests have been widely used by others for hydraulic characterization of low-permeability ( -8 m/sec) rock formations. Recent field studies of low-permeability basalt horizons at the Hanford Site, Washington, indicate that the under-pressure pulse technique is also a viable test method for hydraulic characterization studies. For over-pressure pulse tests, fluid within the test system is rapidly pressurized and the associated pressure decay is monitored as compressed fluid within the test system expands and flows into the test formation. Under-pressure pulse tests are conducted in a similar manner by abruptly decreasing the pressure of fluid within the test system, and monitoring the associated increase in pressure as fluid flows from the formation into the test system. Both pulse test methods have been used in conjunction with other types of tests to determine the hydraulic properties of selected low-permeability basalt horizons at Hanford test sites. Results from both pulse test methods generally provide comparable estimates of hydraulic properties and are in good agreement with those from other tests

Pressure Sores Prevention for Paraplegic People: Effects of Visual, Auditory and Tactile Supplementations on Overpressures Distribution in Seated Posture

Directory of Open Access Journals (Sweden)

Olivier Chenu

2012-01-01

Full Text Available This paper presents a study on the usage of different informative modalities as biofeedbacks of a perceptual supplementation device aiming at reducing overpressure at the buttock area. Visual, audio and lingual electrotactile modalities are analysed and compared with a non-biofeedback session. In conclusion, sensory modalities have a positive and equal effect, but they are not equally judged in terms of comfort and disturbance with some other activities.

Experimental Study of the Effect of Water Mist Location On Blast Overpressure Attenuation in A Shock Tube

Science.gov (United States)

Mataradze, Edgar; Chikhradze, Nikoloz; Bochorishvili, Nika; Akhvlediani, Irakli; Tatishvili, Dimitri

2017-12-01

Explosion protection technologies are based on the formation of a shock wave mitigation barrier between the protection site and the explosion site. Contemporary protective systems use water mist as an extinguishing barrier. To achieve high effectiveness of the protective system, proper selection of water mist characteristics is important. The main factors defining shock wave attenuation in water mist include droplet size distribution, water concentration in the mist, droplet velocity and geometric properties of mist. This paper examines the process of attenuation of shock waves in mist with droplets ranging from 25 to 400 microns under different conditions of water mist location. Experiments were conducted at the Mining Institute with the use of a shock tube to study the processes of explosion suppression by a water mist barrier. The shock tube consists of a blast chamber, a tube, a system for the dosed supply of water, sensors, data recording equipment, and a process control module. Shock wave overpressure reduction coefficient was studied in the shock tube under two different locations of water mist: a) when water mist is created in direct contact with blast chamber and b) the blast chamber and the mist are separated by air space. It is established that in conditions when the air space distance between the blast chamber and the mist is 1 meter, overpressure reduction coefficient is 1.5-1.6 times higher than in conditions when water mist is created in direct contact with blast chamber.

Numerical Methods for the Analysis of Power Transformer Tank Deformation and Rupture Due to Internal Arcing Faults.

Science.gov (United States)

Yan, Chenguang; Hao, Zhiguo; Zhang, Song; Zhang, Baohui; Zheng, Tao

2015-01-01

Power transformer rupture and fire resulting from an arcing fault inside the tank usually leads to significant security risks and serious economic loss. In order to reveal the essence of tank deformation or explosion, this paper presents a 3-D numerical computational tool to simulate the structural dynamic behavior due to overpressure inside transformer tank. To illustrate the effectiveness of the proposed method, a 17.3 MJ and a 6.3 MJ arcing fault were simulated on a real full-scale 360MVA/220kV oil-immersed transformer model, respectively. By employing the finite element method, the transformer internal overpressure distribution, wave propagation and von-Mises stress were solved. The numerical results indicate that the increase of pressure and mechanical stress distribution are non-uniform and the stress tends to concentrate on connecting parts of the tank as the fault time evolves. Given this feature, it becomes possible to reduce the risk of transformer tank rupture through limiting the fault energy and enhancing the mechanical strength of the local stress concentrative areas. The theoretical model and numerical simulation method proposed in this paper can be used as a substitute for risky and costly field tests in fault overpressure analysis and tank mitigation design of transformers.

Numerical Methods for the Analysis of Power Transformer Tank Deformation and Rupture Due to Internal Arcing Faults

Science.gov (United States)

Yan, Chenguang; Hao, Zhiguo; Zhang, Song; Zhang, Baohui; Zheng, Tao

2015-01-01

Power transformer rupture and fire resulting from an arcing fault inside the tank usually leads to significant security risks and serious economic loss. In order to reveal the essence of tank deformation or explosion, this paper presents a 3-D numerical computational tool to simulate the structural dynamic behavior due to overpressure inside transformer tank. To illustrate the effectiveness of the proposed method, a 17.3MJ and a 6.3MJ arcing fault were simulated on a real full-scale 360MVA/220kV oil-immersed transformer model, respectively. By employing the finite element method, the transformer internal overpressure distribution, wave propagation and von-Mises stress were solved. The numerical results indicate that the increase of pressure and mechanical stress distribution are non-uniform and the stress tends to concentrate on connecting parts of the tank as the fault time evolves. Given this feature, it becomes possible to reduce the risk of transformer tank rupture through limiting the fault energy and enhancing the mechanical strength of the local stress concentrative areas. The theoretical model and numerical simulation method proposed in this paper can be used as a substitute for risky and costly field tests in fault overpressure analysis and tank mitigation design of transformers. PMID:26230392

An analytical solution describing the shape of a yield stress material subjected to an overpressure

DEFF Research Database (Denmark)

Hovad, Emil; Spangenberg, Jon; Larsen, P.

2016-01-01

as well as the spread length and height of the material when deformed in a box due to gravity. In the present work, the analytical solution is extended with the addition of an overpressure that acts over the entire body of the material. This extension enables finding the shape of a yield stress material......Many fluids and granular materials are able to withstand a limited shear stress without flowing. These materials are known as yields stress materials. Previously, an analytical solution was presented to quantify the yield stress for such materials. The yields stress is obtained based on the density...... with known density and yield stress when for instance deformed under water or subjected to a forced air pressure....

Analyses of a steel containment vessel with an outer contact structure under severe internal overpressurization conditions

International Nuclear Information System (INIS)

Porter, V.L.

1994-01-01

Many Mark-I and Mark-II BWR plants are designed with a steel vessel as the primary containment. Typically, the steel containment vessel (SCV) is enclosed within a reinforced concrete shield building with only a small gap (74-90 mm) separating the two structures. This paper describes finite element analyses performed to evaluate the effects of contact and friction between a steel containment vessel and an outer contact structure when the containment vessel is subjected to large internal pressures. These computations were motivated by a joint program on containment integrity involving the Nuclear Power Engineering Corporation (NUPEC) of Japan, the US Nuclear Regulatory Commission (NRC), and Sandia National Laboratories for testing model containments. Under severe accident loading conditions, the steel containment vessel in a typical Mark-I or Mark-II plant may deform under internal pressurization such that it contacts the inner surface of a shield building wall. (Thermal expansion from increasing accident temperatures would also close the gap between the SCV and the shield building, but temperature effects are not considered in these analyses.) The amount and location of contact and the pressure at which it occurs all affect how the combined structure behaves. A preliminary finite element model has been developed to analyze a model of a typical steel containment vessel con-ling into contact with an outer structure. Both the steel containment vessel and the outer contact structure were modelled with axisymmetric shell finite elements. Of particular interest are the influence that the contact structure has on deformation and potential failure modes of the containment vessel. Furthermore, the coefficient of friction between the two structures was varied to study its effects on the behavior of the containment vessel and on the uplift loads transmitted to the contact structure. These analyses show that the material properties of an outer contact structure and the amount

The Opportunity of International Manufacturing Organization for Lithuania's Large Furniture Enterprises

Directory of Open Access Journals (Sweden)

Tomas Baltuška

2016-04-01

Full Text Available This article analysis international manufacturing theory, current situation in Lithuania’s large furniture enterprises, opportunities for international manufacturing, the advantages of such strategy and the problems that comes along from introduction and imple-mentation of such strategy. The main purposes of this article are to analyze sector of furniture enterprises, examples of successful enterprises of international manufactures. Survey data is analyzed and the conclusions are formulated, which reflect the benefits of the system put in place by companies.

Compaction of TOC-rich shales due to kerogen conversion. Implications for fluid flow and overpressure

International Nuclear Information System (INIS)

Hanebeck, D.; Krooss, B.M.; Leythaeuser, D.

1998-01-01

TOC-rich shales (10% TOC) have been artificially matured at temperatures between 200 and 350 deg C under controlled axial stress (20 - 40 MPa) for up to 350 hours. The volume change of the cylindrical samples was monitored continuously throughout the experiment. The performed experiments showed that the compaction associated with the thermal decomposition of the kerogen is significantly larger under hydrous than under dry pyrolysis conditions. This observation points at an important role of water in the conversion of kerogen. Semi quantitative permeability tests indicated that sample permeability had decreased at least one order of magnitude after the compaction pyrolysis experiments. This permeability reduction in combination with the observed compaction is the most probable mechanism for overpressure formation in TOC-rich source rock sequences. (author)

Lessons learned: Infrastructure development and financial management for large, publicly funded, international trials.

Science.gov (United States)

Larson, Gregg S; Carey, Cate; Grarup, Jesper; Hudson, Fleur; Sachi, Karen; Vjecha, Michael J; Gordin, Fred

2016-04-01

Randomized clinical trials are widely recognized as essential to address worldwide clinical and public health research questions. However, their size and duration can overwhelm available public and private resources. To remain competitive in international research settings, advocates and practitioners of clinical trials must implement practices that reduce their cost. We identify approaches and practices for large, publicly funded, international trials that reduce cost without compromising data integrity and recommend an approach to cost reporting that permits comparison of clinical trials. We describe the organizational and financial characteristics of The International Network for Strategic Initiatives in Global HIV Trials, an infectious disease research network that conducts multiple, large, long-term, international trials, and examine challenges associated with simple and streamlined governance and an infrastructure and financial management model that is based on performance, transparency, and accountability. It is possible to reduce costs of participants' follow-up and not compromise clinical trial quality or integrity. The International Network for Strategic Initiatives in Global HIV Trials network has successfully completed three large HIV trials using cost-efficient practices that have not adversely affected investigator enthusiasm, accrual rates, loss-to-follow-up, adherence to the protocol, and completion of data collection. This experience is relevant to the conduct of large, publicly funded trials in other disease areas, particularly trials dependent on international collaborations. New approaches, or creative adaption of traditional clinical trial infrastructure and financial management tools, can render large, international clinical trials more cost-efficient by emphasizing structural simplicity, minimal up-front costs, payments for performance, and uniform algorithms and fees-for-service, irrespective of location. However, challenges remain. They

Benchmarking processes for managing large international space programs

Science.gov (United States)

Mandell, Humboldt C., Jr.; Duke, Michael B.

1993-01-01

The relationship between management style and program costs is analyzed to determine the feasibility of financing large international space missions. The incorporation of management systems is considered to be essential to realizing low cost spacecraft and planetary surface systems. Several companies ranging from large Lockheed 'Skunk Works' to small companies including Space Industries, Inc., Rocket Research Corp., and Orbital Sciences Corp. were studied. It is concluded that to lower the prices, the ways in which spacecraft and hardware are developed must be changed. Benchmarking of successful low cost space programs has revealed a number of prescriptive rules for low cost managements, including major changes in the relationships between the public and private sectors.

An improved probit method for assessment of domino effect to chemical process equipment caused by overpressure.

Science.gov (United States)

Mingguang, Zhang; Juncheng, Jiang

2008-10-30

Overpressure is one important cause of domino effect in accidents of chemical process equipments. Damage probability and relative threshold value are two necessary parameters in QRA of this phenomenon. Some simple models had been proposed based on scarce data or oversimplified assumption. Hence, more data about damage to chemical process equipments were gathered and analyzed, a quantitative relationship between damage probability and damage degrees of equipment was built, and reliable probit models were developed associated to specific category of chemical process equipments. Finally, the improvements of present models were evidenced through comparison with other models in literatures, taking into account such parameters: consistency between models and data, depth of quantitativeness in QRA.

Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Yankee Rowe nuclear power plant

International Nuclear Information System (INIS)

Latorre, V.R.; Mayn, B.G.

1979-08-01

This report documents the technical evaluation of the electrical, instrumentation, and control design aspects for the low temperature overpressure protection system of the Yankee Rowe nuclear power plant. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria

Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Maine Yankee nuclear power plant

International Nuclear Information System (INIS)

Latorre, V.R.; Mayn, B.G.

1979-08-01

This report documents the technical evaluation of the electrical, instrumentation, and control design aspects for the low temperature overpressure protection system of the Maine Yankee nuclear power plant. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria

Use of loop-seals for the control of the overpressures in hydraulic transients evolving in a sea service water system

Energy Technology Data Exchange (ETDEWEB)

Canetta, D.; Capozza, A.; Iovino, G.

1985-01-01

The transient response following pump trip-offs and start-ups was investigated in the sea water system of a nuclear power plant. Specific care was devoted to water column separation and cavity collapse phenomena. A computer program designed for analysis of complex hydraulic networks was used. It is found that dangerous overpressures can be avoided by the use of loop seals. The design of the vacuum breaker valves of the loop seals and the optimization of overall transient behavior is discussed. 1 reference.

Experimental facilities for large-scale and full-scale study of hydrogen accidents

Energy Technology Data Exchange (ETDEWEB)

Merilo, E.; Groethe, M.; Colton, J. [SRI International, Poulter Laboratory, Menlo Park, CA (United States); Chiba, S. [SRI Japan, Tokyo (Japan)

2007-07-01

This paper summarized some of the work that has been performed at SRI International over the past 5 years that address safety issues for the hydrogen-based economy. Researchers at SRI International have conducted experiments at the Corral Hollow Experiment Site (CHES) near Livermore California to obtain fundamental data on hydrogen explosions for risk assessment. In particular, large-scale hydrogen tests were conducted using homogeneous mixtures of hydrogen in volumes from 5.3 m{sup 3} to 300 m{sup 3} to represent scenarios involving fuel cell vehicles as well as transport and storage facilities. Experiments have focused on unconfined deflagrations of hydrogen and air, and detonations of hydrogen in a semi-open space to measure free-field blast effects; the use of blast walls as a mitigation technique; turbulent enhancement of hydrogen combustion due to obstacles within the mixture, and determination of when deflagration-to-detonation transition occurs; the effect of confined hydrogen releases and explosions that could originate from an interconnecting hydrogen pipeline; and, large and small accidental releases of hydrogen. The experiments were conducted to improve the prediction of hydrogen explosions and the capabilities for performing risk assessments, and to develop mitigation techniques. Measurements included hydrogen concentration; flame speed; blast overpressure; heat flux; and, high-speed, standard, and infrared video. The data collected in these experiments is used to correlate computer models and to facilitate the development of codes and standards. This work contributes to better safety technology by evaluating the effectiveness of different blast mitigation techniques. 13 refs., 13 figs.

Blast overpressure and fallout radiation dose models for casualty assessment and other purposes. Rev. ed.

International Nuclear Information System (INIS)

Bentley, P.R.

1981-12-01

The determination of blast overpressures and fallout radiation doses at points on a sufficiently fine grid, for any part or for the whole of the UK, and for any postulated attack, is an essential element in the systematic assessment of casualties, the estimation of numbers of homeless, and the evaluation of life-saving measures generally. Models are described which provide the required blast and dose values and which are intended to supersede existing models which were introduced in 1971. The factors which affect blast and, more particularly, dose values are discussed, and the way in which various factors are modelled is described. The models are incorporated into separate computer programs which are described, the outputs of which are stored on magnetic tape for subsequent use as required. (author)

Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Salem nuclear power plant, Unit 1

International Nuclear Information System (INIS)

Laudenbach, D.H.

1979-03-01

The technical evaluation is presented for the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Salem nuclear power plant, Unit 1. Design basis criteria used to evaluate the acceptability of the system include operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects

Science.gov (United States)

Pischke, Erin C.; Knowlton, Jessie L.; Phifer, Colin C.; Gutierrez Lopez, Jose; Propato, Tamara S.; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R.; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E.

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects.

Science.gov (United States)

Pischke, Erin C; Knowlton, Jessie L; Phifer, Colin C; Gutierrez Lopez, Jose; Propato, Tamara S; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Possible mechanism of horizontal overpressure generation of the Khibiny, Lovozero, and Kovdor ore clusters on the Kola Peninsula

Science.gov (United States)

Rebetsky, Yu. L.; Sim, L. A.; Kozyrev, A. A.

2017-07-01

The paper discusses questions related to the generation of increasing crustal horizontal compressive stresses compared to the idea of the standard gravitational state at the elastic stage or even from the prevalence of horizontal compression over vertical stress equal to the lithostatic pressure. We consider a variant of superfluous horizontal compression related to internal lithospheric processes occurrin in the crust of orogens, shields, and plates. The vertical ascending movements caused by these motions at the sole of the crust or the lithosphere pertain to these and the concomitant exogenic processes giving rise to denudation and, in particular, to erosion of the surfaces of forming rises. The residual stresses of the gravitational stressed state at the upper crust of the Kola Peninsula have been estimated for the first time. These calculations are based on the volume of sediments that have been deposited in Arctic seas beginning from the Mesozoic. The data speak to the possible level of residual horizontal compressive stresses up to 90 MPa in near-surface crustal units. This estimate is consistent with the results of in situ measurements that have been carried out at the Mining Institute of the Kola Science Center, Russian Academy of Sciences (RAS), for over 40 years. It is possible to forecast the horizontal stress gradient based on depth using our concept on the genesis of horizontal overpressure, and this forecasting is important for studying the formation of endogenic deposits.

International Timetabling Competition 2011: An Adaptive Large Neighborhood Search algorithm

DEFF Research Database (Denmark)

Sørensen, Matias; Kristiansen, Simon; Stidsen, Thomas Riis

2012-01-01

An algorithm based on Adaptive Large Neighborhood Search (ALNS) for solving the generalized High School Timetabling problem in XHSTT-format (Post et al (2012a)) is presented. This algorithm was among the nalists of round 2 of the International Timetabling Competition 2011 (ITC2011). For problem...

Large-amplitude internal tides, solitary waves, and turbulence in the central Bay of Biscay

Science.gov (United States)

Xie, X. H.; Cuypers, Y.; Bouruet-Aubertot, P.; Ferron, B.; Pichon, A.; LourençO, A.; Cortes, N.

2013-06-01

and fine-scale measurements collected in the central Bay of Biscay during the MOUTON experiment are analyzed to investigate the dynamics of internal waves and associated mixing. Large-amplitude internal tides (ITs) that excite internal solitary waves (ISWs) in the thermocline are observed. ITs are dominated by modes 3 and 4, while ISWs projected on mode 1 that is trapped in the thermocline. Therein, ITs generate a persistent narrow shear band, which is strongly correlated with the enhanced dissipation rate in the thermocline. This strong dissipation rate is further reinforced in the presence of ISWs. Dissipation rates during the period without ISWs largely agree with the MacKinnon-Gregg scaling proposed for internal wavefields dominated by a low-frequency mode, while they show poor agreement with the Gregg-Henyey parameterization valid for internal wavefields close to the Garrett-Munk model. The agreement with the MacKinnon-Gregg scaling is consistent with the fact that turbulent mixing here is driven by the low-frequency internal tidal shear.

Geologic implications of large-scale trends in well-log response, northern Green River Basin, Wyoming

International Nuclear Information System (INIS)

Prensky, S.E.

1986-01-01

Well-log response in lower Tertiary and Upper Cretaceous rocks in the northern Green River basin, Wyoming, is examined. Digitally recorded well-log data for selected wells located throughout the basin were processed by computer and displayed as highly compressed depth-scale plots for examining large-scale geologic trends. Stratigraphic units, formed under similar depositional conditions, are distinguishable by differing patterns on these plots. In particular, a strong lithologic contrast between Tertiary and underlying Upper Cretaceous non-marine clastic rocks is revealed and correlated through the study area. Laboratory analysis combined with gamma-ray spectrometry log data show that potassium feldspars in the arkosic Tertiary sandstones cause the contrast. The nature and extent of overpressuring has been examined. Data shift on shale conductivity and shale acoustic transit-time plots, previously ascribed to changes in pore pressure, correspond to stratigraphic changes and not necessarily with changes in pore pressure as indicated by drilling-mud weights. Gulf Coast well-log techniques for detecting overpressuring are unreliable and ineffectual in this basin, which has experienced significantly different geologic depositional and tectonic conditions

A new international role for large electric utilities

International Nuclear Information System (INIS)

Johnson, P. M.

1993-01-01

Population pressures leading to changes in India, China, and South America during the next twenty-five years and the resulting revolutionary shifts in the world's major economic axes, such as growth in populations, in demand for consumer goods, in production capacities, and in energy demand, will demand greater international cooperation according to a former premier of the province of Quebec. He stressed in particular, the contributions that large electrical utilities can play in this world-wide transformation. He predicted the possibility of privatization and an extended role in international energy activities for Hydro-Quebec as a result of these major demographic and economic changes in Asia and South America, and the consequent decline in the economies of the G7 countries. Major capital investments abroad, and the formation of networks of domestic and foreign partnerships in the developing world were predicted to be the key to the survival and continuing success not only of Hydro-Quebec, but all major utility companies

Behavior and evaluation of an existing underground structure subjected to impulsive loads from an internal explosion

International Nuclear Information System (INIS)

Keller, M.D.; Khan, P.K.

1997-12-01

An explosion is the result of a rapid chemical reaction which generates transient air pressure waves called blast waves. There has been much research on the processes of blast wave formation, propagation of blast waves, and quantification of the incident and reflected blast overpressures. The magnitude of blast overpressure, in a partially vented environment, is mainly a function of the type and quantity of detonating material, the amount of available venting, and the orientation and configuration of the reflecting surfaces. In addition to blast overpressure, an explosion can also generate high energy missiles (such as fragments), shock loads, and rapid rise of temperature in the confined space. This study concentrates on the effects of blast overpressure on a 40 feet diameter reinforced concrete cylinder with a hemispherical dome roof, supported on a 3 feet thick reinforced concrete pad, and buried under a minimum of 15 feet of soil used for radiation shielding at the top of the dome. The scope of this study is to determine whether the structure can withstand the blast overpressure generated by the postulated explosion without exceeding allowable design criteria

Assessment of the Effectiveness of Combat Eyewear Protection Against Blast Overpressure.

Science.gov (United States)

Sundaramurthy, A; Skotak, M; Alay, E; Unnikrishnan, G; Mao, H; Duan, X; Williams, S T; Harding, T H; Chandra, N; Reifman, J

2018-07-01

It is unclear whether combat eyewear used by U. S. Service members is protective against blast overpressures (BOPs) caused by explosive devices. Here, we investigated the mechanisms by which BOP bypasses eyewear and increases eye surface pressure. We performed experiments and developed three-dimensional (3D) finite element (FE) models of a head form (HF) equipped with an advanced combat helmet (ACH) and with no eyewear, spectacles, or goggles in a shock tube at three BOPs and five head orientations relative to the blast wave. Overall, we observed good agreement between experimental and computational results, with average discrepancies in impulse and peak-pressure values of less than 15% over 90 comparisons. In the absence of eyewear and depending on the head orientation, we identified three mechanisms that contributed to pressure loading on the eyes. Eyewear was most effective at 0 deg orientation, with pressure attenuation ranging from 50 (spectacles) to 80% (goggles) of the peak pressures observed in the no-eyewear configuration. Spectacles and goggles were considerably less effective when we rotated the HF in the counter-clockwise direction around the superior-inferior axis of the head. Surprisingly, at certain orientations, spectacles yielded higher maximum pressures (80%) and goggles yielded larger impulses (150%) than those observed without eyewear. The findings from this study will aid in the design of eyewear that provides better protection against BOP.

Fracture assessment of the Oskarshamn 1 reactor pressure vessel under cold over-pressurization

International Nuclear Information System (INIS)

Sattari-Far, I.

2001-03-01

The major motivation of this study was to develop a methodology for fracture assessment of surface defects in the 01 reactor pressure vessel under cold loading scenarios, particularly the cold over-pressurization event. According to a previous study, the FENIX project, the cold over-pressurization of the O1 reactor is a limiting loading case, as the ductile/brittle transition temperature (RT NDT ) of certain welds in the O1 beltline region may be over 100 deg C at the-end-of-life condition. The FENIX project gave values of the acceptable and critical crack depth to be equal to the thickness of the cladding layer (about 6 mm) under this load case using the ASME K Ic reference curve methodology. This study is aimed to develop a methodology to give a more precise fracture assessment of the O1 reactor under cold loading scenarios. Some of the main objectives of this study have been as below: To prepare a material which can simulate the mechanical properties and RT NDT of the O1 reactor at the end-of-life conditions. To conduct a fracture mechanics test program to cover the essential influencing factors, such as crack geometry (shallow and deep cracks) and loading condition (uniaxial and biaxial) on the cleavage fracture toughness. To perform fracture mechanics analyses to identify a suitable methodology for assessment of the experimental results. To study the responses of engineering fracture assessment methods to the experimental results from the clad specimens. To propose a fracture assessment procedure for determination of the acceptable and critical flaw sizes in the 01 reactor under the cold loading events. A test program consisted of experiments on standard SEN(B) specimens and clad beams, containing surface cracks was conducted during the course of this project. A total of nine clad beams and clad cruciform specimens were tested under uniaxial and biaxial loading. The test material is reactor steel of type A 508 Grade B, which is specially heat-treated to

A new restoration of the NFP20-East cross section and possible tectonic overpressure in the Penninic Adula Nappe (Central Alps)

Science.gov (United States)

Pleuger, J.; Podladchikov, Y.

2012-04-01

The Adula Nappe in the eastern Central Alps is one of the four units in the Alps from which ultrahigh-pressure rocks have been reported. Several very different models for its tectonic history have been published but none of these models is fully satisfactory. In the models of Schmid et al. (1996) and Engi et al. (2001), the main mechanism of exhumation is assumed to be extrusion. The extrusion models require top-to-the-hinterland, i.e. top-to-the-south faulting in the hanging wall of the exhuming nappe for which there is no evidence. Froitzheim et al. (2003) proposed a scenario with two different subduction zones, an internal one in which the South Penninic and Briançonnais domains were subducted, and an external one in which the North Penninc domain and the European margin, including the Adula nappe, were subducted. In this model, the exhumation of the Adula nappe results from the subduction of the overlying sub-Briançonnais and sub-South-Penninic mantle in the internal subduction zone. The Adula nappe would then have been exhumed from below into a top-to-the-north shear zone also affecting the overriding Briançonnais units. The main shortcoming of this model is that otherwise there is little evidence for two Alpine subduction zones. All the models cited above are based on the conversion of peak pressures obtained from geobarometry to depth by assuming lithostatic pressures. This results in a much greater burial depth of the Adula Nappe with respect to the surrounding units which poses major problems when trying to reconcile maximum burial depths of the Penninic nappes with their structural record. We performed a new restoration of the NFP20-East cross section (Schmid et al. 1996) without applying a lithostatic pressure-to-depth conversion but a purely geometrical restoration of deformation events in the Penninic nappe stack. The major constraints on these reconstructions are given by strain estimates for the major deformation phases in the units overlying the

Internal Flow Analysis of Large L/D Solid Rocket Motors

Science.gov (United States)

Laubacher, Brian A.

2000-01-01

Traditionally, Solid Rocket Motor (SRM) internal ballistic performance has been analyzed and predicted with either zero-dimensional (volume filling) codes or one-dimensional ballistics codes. One dimensional simulation of SRM performance is only necessary for ignition modeling, or for motors that have large length to port diameter ratios which exhibit an axial "pressure drop" during the early burn times. This type of prediction works quite well for many types of motors, however, when motor aspect ratios get large, and port to throat ratios get closer to one, two dimensional effects can become significant. The initial propellant grain configuration for the Space Shuttle Reusable Solid Rocket Motor (RSRM) was analyzed with 2-D, steady, axi-symmetric computational fluid dynamics (CFD). The results of the CFD analysis show that the steady-state performance prediction at the initial burn geometry, in general, agrees well with 1-D transient prediction results at an early time, however, significant features of the 2-D flow are captured with the CFD results that would otherwise go unnoticed. Capturing these subtle differences gives a greater confidence to modeling accuracy, and additional insight with which to model secondary internal flow effects like erosive burning. Detailed analysis of the 2-D flowfield has led to the discovery of its hidden 1-D isentropic behavior, and provided the means for a thorough and simplified understanding of internal solid rocket motor flow. Performance parameters such as nozzle stagnation pressure, static pressure drop, characteristic velocity, thrust and specific impulse are discussed in detail and compared for different modeling and prediction methods. The predicted performance using both the 1-D codes and the CFD results are compared with measured data obtained from static tests of the RSRM. The differences and limitations of predictions using ID and 2-D flow fields are discussed and some suggestions for the design of large L/D motors and

Rapid monitoring of large groups of internally contaminated people following a radiation accident

International Nuclear Information System (INIS)

1994-05-01

In the management of an emergency, it is necessary to assess the radiation exposures of people in the affected areas. An essential component in the programme is the monitoring of internal contamination. Existing fixed installations for the assessment of incorporated radionuclides may be of limited value in these circumstances because they may be inconveniently sited, oversensitive for the purpose, or inadequately equipped and staffed to cope with the large numbers referred to them. The IAEA considered it important to produce guidance on rapid monitoring of large groups of internally contaminated people. The purpose of this document is to provide Member States with an overview on techniques that can be applied during abnormal or accidental situations. Refs and figs

MSSV Modeling for Wolsong-1 Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Moon, Bok Ja; Choi, Chul Jin; Kim, Seoung Rae [KEPCO EandC, Daejeon (Korea, Republic of)

2010-10-15

The main steam safety valves (MSSVs) are installed on the main steam line to prevent the overpressurization of the system. MSSVs are held in closed position by spring force and the valves pop open by internal force when the main steam pressure increases to open set pressure. If the overpressure condition is relieved, the valves begin to close. For the safety analysis of anticipated accident condition, the safety systems are modeled conservatively to simulate the accident condition more severe. MSSVs are also modeled conservatively for the analysis of over-pressurization accidents. In this paper, the pressure transient is analyzed at over-pressurization condition to evaluate the conservatism for MSSV models

Surface and Internal Waves due to a Moving Load on a Very Large Floating Structure

Directory of Open Access Journals (Sweden)

Taro Kakinuma

2012-01-01

Full Text Available Interaction of surface/internal water waves with a floating platform is discussed with nonlinearity of fluid motion and flexibility of oscillating structure. The set of governing equations based on a variational principle is applied to a one- or two-layer fluid interacting with a horizontally very large and elastic thin plate floating on the water surface. Calculation results of surface displacements are compared with the existing experimental data, where a tsunami, in terms of a solitary wave, propagates across one-layer water with a floating thin plate. We also simulate surface and internal waves due to a point load, such as an airplane, moving on a very large floating structure in shallow water. The wave height of the surface or internal mode is amplified when the velocity of moving point load is equal to the surface- or internal-mode celerity, respectively.

A method to calculate equilibrium concentrations of gas and defects in the vicinity of an over-pressured bubble in UO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Noirot, L., E-mail: laurence.noirot@cea.fr

2014-04-01

We present a method devised to calculate the equilibrium concentration of point defects and gas atoms in the vicinity of a bubble in UO{sub 2}. First, we neglect the mechanical energy stored in the solid around an over-pressured bubble and then we explain how to take it into account. We apply the method to helium in interstitial positions in UO{sub 2}, and compare our theoretical value of Henry’s constant with experiments and a molecular dynamics computation. Then, we apply the method to xenon in a Schottky defect and use it to assess the realism of two scenarios elaborated to explain the “paradox of annealing experiments”, i.e. “why a large proportion of gas is released from grains in annealing experiments on irradiated fuel, even though there are thousands of intragranular bubbles to trap the gas?” These two scenarios (thermal resolution or blockage of trapping due to the stress field around the bubbles) were both found to be unrealistic, at least with the formation energies available from ab initio calculations, and with the assumption made to calculate the Z3 term of the partition function. This term is related to the vibration frequencies of xenon atoms in Schottky defects and lattice atoms close to defects.

Large eddy simulation and experimental study on vented gasoline-air mixture explosions in a semi-confined obstructed pipe.

Science.gov (United States)

Li, Guoqing; Du, Yang; Wang, Shimao; Qi, Sheng; Zhang, Peili; Chen, Wenzhuo

2017-10-05

In this work, LES simulation coupled with a TFC sub-grid combustion model has been performed in a semi-confined pipe (L/D=10, V=10L) in the presence of four hollow-square obstacles (BR=49.8%) with circular hollow cross-section, in order to study the premixed gasoline-air mixture explosions. The comparisons between simulated results and experimental results have been conducted. It was found that the simulated results were in good agreement with experimental data in terms of flame structures, flame locations and overpressure time histories. Moreover, the interaction between flame propagation process and obstacles, overpressure dynamics were analyzed. In addition, the effects of initial gasoline vapor concentration (lean (ϕ=1.3%), stoichiometric (ϕ=1.7%) and rich (ϕ=2.1%)), and the number of obstacles (from 1 to 4) were also investigated by experiments. Some of the experimental results have been compared with the literature data. It is found that the explosion parameters of gasoline-air mixtures (e.g. the maximum overpressure peaks, average overpressure growth rates, etc.) are different from some other fuels such as hydrogen, methane and LPG, etc. Copyright © 2017. Published by Elsevier B.V.

Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Haddam Neck Nuclear Power Plant

International Nuclear Information System (INIS)

Laudenbach, D.H.

1979-03-01

The technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Haddam Neck Nuclear Power Plant is presented. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Support Program being conducted for the U.S. Nuclear Regulatory Commission by Lawrence Livermore Laboratory

Current state of knowledge on the behavior of steel liners in concrete containments subjected to overpressurization loads

International Nuclear Information System (INIS)

von Riesemann, W.A.; Parks, M.B.

1993-01-01

In the United States, concrete containment buildings for commercial nuclear power plants have steel liners that act as the intemal pressure boundary. The liner abuts the concrete, acting as the interior concrete form. The liner is attached to the concrete by either studs or by a continuous structural shape (such as a T-section or channel) that is either continuously or intermittently welded to the liner. Studs are commonly used in reinforced concrete containments, while prestressed containments utilize a structural element as the anchorage. The practice in some countries follows the US practice, while in other countries the containment does not have a steel liner. In this latter case, there is a true double containment, and the annular region between the two containments is vented. This paper will review the practice of design of the liner system prior to the consideration of severe accident loads (overpressurization loads beyond the design conditions)

Fracture assessment of the Oskarshamn 1 reactor pressure vessel under cold over-pressurization

Energy Technology Data Exchange (ETDEWEB)

Sattari-Far, I. [DNV Technical Consulting AB, Stockholm (Sweden)

2001-03-01

The major motivation of this study was to develop a methodology for fracture assessment of surface defects in the 01 reactor pressure vessel under cold loading scenarios, particularly the cold over-pressurization event. According to a previous study, the FENIX project, the cold over-pressurization of the O1 reactor is a limiting loading case, as the ductile/brittle transition temperature (RT{sub NDT}) of certain welds in the O1 beltline region may be over 100 deg C at the-end-of-life condition. The FENIX project gave values of the acceptable and critical crack depth to be equal to the thickness of the cladding layer (about 6 mm) under this load case using the ASME K{sub Ic} reference curve methodology. This study is aimed to develop a methodology to give a more precise fracture assessment of the O1 reactor under cold loading scenarios. Some of the main objectives of this study have been as below: To prepare a material which can simulate the mechanical properties and RT{sub NDT} of the O1 reactor at the end-of-life conditions. To conduct a fracture mechanics test program to cover the essential influencing factors, such as crack geometry (shallow and deep cracks) and loading condition (uniaxial and biaxial) on the cleavage fracture toughness. To perform fracture mechanics analyses to identify a suitable methodology for assessment of the experimental results. To study the responses of engineering fracture assessment methods to the experimental results from the clad specimens. To propose a fracture assessment procedure for determination of the acceptable and critical flaw sizes in the 01 reactor under the cold loading events. A test program consisted of experiments on standard SEN(B) specimens and clad beams, containing surface cracks was conducted during the course of this project. A total of nine clad beams and clad cruciform specimens were tested under uniaxial and biaxial loading. The test material is reactor steel of type A 508 Grade B, which is specially heat

Mucosal wave characteristics in three voice modes (fry, hiss & overpressure) produced by a female speaker: a preliminary study using stroboscopy, HSDI and analyzed by kymography, P-FFT & Nyquist plots

Science.gov (United States)

Izdebski, Krzysztof; Ward, Ronald R.; Yan, Yuling

2012-02-01

HSDI provides a whole new way to investigate visually intra-laryngeal behavior and posturing during phonation by providing detailed real-time information about laryngeal biomechanics that include observations about mucosal wave, wave motion directionality, glottic area wave form, asymmetry of vibrations within and across vocal folds and contact area of the glottis including posterior commissure closure. These observations are fundamental to our understanding and modeling of both normal and disordered phonation. In this preliminary report we focus on direct HSDI in vivo observations of not only the glottic region, but also on the entire supraglottic laryngeal posturing during fry, breathy/hiss and over-pressured phonation modes produced in a non-pathological settings. Analysis included spatio-temporal vibration patterns of vocal folds, multi-line kymograms, spectral PFFT analysis, and Nyquist spatio-temporal plots. The presented examples reveal that supraglottic contraction assists in prolonged closed phase of the vibratory cycle, and that prolonged closed phase is longest in fry and overpressure and shortest albeit complex in hiss. Hiss also allows for vocal fold vibration despite glottis separation. These findings need to be compared to pathologic phonation representing the three voice modes to derive at better differential diagnosis.

What are decision making styles for international apparel brands in a large emerging market?

OpenAIRE

De Mattos, Claudio; Salciuviene, Laura; Auruskeviciene, Vilte; Juneja, Garima

2015-01-01

The main purpose of the paper is to identify consumer decision making styles based on Sproles & Kendall's (1986) framework in a large emerging market for international apparel brands. An online questionnaire-based survey with individual Indian consumers was conducted. The results of this study identify five consumer decision making styles among Indian consumers when selecting international apparel brands. The findings also suggest significant statistical differences between males and fema...

Simulations of the design basis accident at conditions of power increase and the o transient of MSIV at overpressure conditions of the Laguna Verde Power Station

International Nuclear Information System (INIS)

Araiza M, E.; Nunez C, A.

2001-01-01

This document presents the analysis of the simulation of the loss of coolant accident at uprate power conditions, that is 2027 MWt (105% of the current rated power of 1931MWt). This power was reached allowing an increase in the turbine steam flow rate without changing the steam dome pressure value at its rated conditions (1020 psiaJ. There are also presented the results of the simulation of the main steam isolation va/ve transient at overpressure conditions 1065 psia and 1067 MWt), for Laguna Verde Nuclear Power Station. Both simulations were performed with the best estimate computer code TRA C BF1. The results obtained in the loss of coolant accident show that the emergency core coolant systems can recover the water level in the core before fuel temperature increases excessively, and that the peak pressure reached in the drywell is always below its design pressure. Therefore it is concluded that the integrity of the containment is not challenged during a loss of coolant accident at uprate power conditions.The analysis of the main steam isolation valve transients at overpressure conditions, and the analysis of the particular cases of the failure of one to six safety relief valves to open, show that the vessel peak pressures are below the design pressure and have no significant effect on vessel integrity. (Author)

Uncertainty budget in internal monostandard NAA for small and large size samples analysis

International Nuclear Information System (INIS)

Dasari, K.B.; Acharya, R.

2014-01-01

Total uncertainty budget evaluation on determined concentration value is important under quality assurance programme. Concentration calculation in NAA or carried out by relative NAA and k0 based internal monostandard NAA (IM-NAA) method. IM-NAA method has been used for small and large sample analysis of clay potteries. An attempt was made to identify the uncertainty components in IM-NAA and uncertainty budget for La in both small and large size samples has been evaluated and compared. (author)

Blast overpressure induced axonal injury changes in rat brainstem and spinal cord

Directory of Open Access Journals (Sweden)

Srinivasu Kallakuri

2015-01-01

Full Text Available Introduction: Blast induced neurotrauma has been the signature wound in returning soldiers from the ongoing wars in Iraq and Afghanistan. Of importance is understanding the pathomechansim(s of blast overpressure (OP induced axonal injury. Although several recent animal models of blast injury indicate the neuronal and axonal injury in various brain regions, animal studies related to axonal injury in the white matter (WM tracts of cervical spinal cord are limited. Objective: The purpose of this study was to assess the extent of axonal injury in WM tracts of cervical spinal cord in male Sprague Dawley rats subjected to a single insult of blast OP. Materials and Methods: Sagittal brainstem sections and horizontal cervical spinal cord sections from blast and sham animals were stained by neurofilament light (NF-L chain and beta amyloid precursor protein immunocytochemistry and observed for axonal injury changes. Results: Observations from this preliminary study demonstrate axonal injury changes in the form of prominent swellings, retraction bulbs, and putative signs of membrane disruptions in the brainstem and cervical spinal cord WM tracts of rats subjected to blast OP. Conclusions: Prominent axonal injury changes following the blast OP exposure in brainstem and cervical spinal WM tracts underscores the need for careful evaluation of blast induced injury changes and associated symptoms. NF-L immunocytochemistry can be considered as an additional tool to assess the blast OP induced axonal injury.

International Large Detector. Letter of intent

Energy Technology Data Exchange (ETDEWEB)

Stoeck, Holger [Sydney Univ., NSW (Australia). Falkiner High Energy Physics Group; Bergauer, Thomas; Dragicevic, Marko [Oesterreichische Akademie der Wissenschaften, Vienna (AT). Inst. fuer Hochenergiephysik] (and others)

2010-07-01

In the summer of 2007, the GLD concept study group, whose membership was largely based in Asia, and the LDC concept study group, which was mostly based in Europe with a strong north american membership, joined forces to produce a single Letter of Intent for a detector at the International Linear Collider, and formed the ILD concept group. Both the GLD and LDC concepts used the particle flow algorithm for jet reconstruction and a TPC for the central tracker. The basic parameters of the two concepts such as the size of the detector and the strength of the solenoid field, however, were quite different and had to be unified in order to write this letter of intent for ILD. Also, other critical details such as the interaction region design had to be unified. This was a non-trivial task, neither politically nor sociologically. The newly-formed concept study group, the ILD group, created a management team and engaged in intense studies to define the ILD detector concept by scientifically optimising the detector designs. The process has worked remarkably well, and we present here the outcome of this study as well as the large amount of studies that preceded separately by the two older concept groups. The ILD detector concept is now well defined, even though some technology choices are still open. One of the merits of unifying the detector concepts was that it revitalised the studies on physics performance and detector designs. We believe that the level of sophistication of the simulation and physics analyses has reached a high degree of sophistication for a detector group at this stage. This was achieved through collaboration and competition, and is the result of a productive learning process. The unification had also positive effects on the subdetector R and D efforts. Most R and D on detector technologies relevant to the GLD and LDC groups is being performed within the framework of detector R and D collaborations such as LCTPC, SiLC, CALICE, and FCAL which pursue their

International Large Detector. Letter of intent

International Nuclear Information System (INIS)

Stoeck, Holger; Bergauer, Thomas; Dragicevic, Marko

2010-01-01

In the summer of 2007, the GLD concept study group, whose membership was largely based in Asia, and the LDC concept study group, which was mostly based in Europe with a strong north american membership, joined forces to produce a single Letter of Intent for a detector at the International Linear Collider, and formed the ILD concept group. Both the GLD and LDC concepts used the particle flow algorithm for jet reconstruction and a TPC for the central tracker. The basic parameters of the two concepts such as the size of the detector and the strength of the solenoid field, however, were quite different and had to be unified in order to write this letter of intent for ILD. Also, other critical details such as the interaction region design had to be unified. This was a non-trivial task, neither politically nor sociologically. The newly-formed concept study group, the ILD group, created a management team and engaged in intense studies to define the ILD detector concept by scientifically optimising the detector designs. The process has worked remarkably well, and we present here the outcome of this study as well as the large amount of studies that preceded separately by the two older concept groups. The ILD detector concept is now well defined, even though some technology choices are still open. One of the merits of unifying the detector concepts was that it revitalised the studies on physics performance and detector designs. We believe that the level of sophistication of the simulation and physics analyses has reached a high degree of sophistication for a detector group at this stage. This was achieved through collaboration and competition, and is the result of a productive learning process. The unification had also positive effects on the subdetector R and D efforts. Most R and D on detector technologies relevant to the GLD and LDC groups is being performed within the framework of detector R and D collaborations such as LCTPC, SiLC, CALICE, and FCAL which pursue their

Probability analysis of MCO over-pressurization during staging

International Nuclear Information System (INIS)

Pajunen, A.L.

1997-01-01

The purpose of this calculation is to determine the probability of Multi-Canister Overpacks (MCOs) over-pressurizing during staging at the Canister Storage Building (CSB). Pressurization of an MCO during staging is dependent upon changes to the MCO gas temperature and the build-up of reaction products during the staging period. These effects are predominantly limited by the amount of water that remains in the MCO following cold vacuum drying that is available for reaction during staging conditions. Because of the potential for increased pressure within an MCO, provisions for a filtered pressure relief valve and rupture disk have been incorporated into the MCO design. This calculation provides an estimate of the frequency that an MCO will contain enough water to pressurize beyond the limits of these design features. The results of this calculation will be used in support of further safety analyses and operational planning efforts. Under the bounding steady state CSB condition assumed for this analysis, an MCO must contain less than 1.6 kg (3.7 lbm) of water available for reaction to preclude actuation of the pressure relief valve at 100 psid. To preclude actuation of the MCO rupture disk at 150 psid, an MCO must contain less than 2.5 kg (5.5 lbm) of water available for reaction. These limits are based on the assumption that hydrogen generated by uranium-water reactions is the sole source of gas produced within the MCO and that hydrates in fuel particulate are the primary source of water available for reactions during staging conditions. The results of this analysis conclude that the probability of the hydrate water content of an MCO exceeding 1.6 kg is 0.08 and the probability that it will exceed 2.5 kg is 0.01. This implies that approximately 32 of 400 staged MCOs may experience pressurization to the point where the pressure relief valve actuates. In the event that an MCO pressure relief valve fails to open, the probability is 1 in 100 that the MCO would experience

Response of ENSO amplitude to global warming in CESM large ensemble: uncertainty due to internal variability

Science.gov (United States)

Zheng, Xiao-Tong; Hui, Chang; Yeh, Sang-Wook

2018-06-01

El Niño-Southern Oscillation (ENSO) is the dominant mode of variability in the coupled ocean-atmospheric system. Future projections of ENSO change under global warming are highly uncertain among models. In this study, the effect of internal variability on ENSO amplitude change in future climate projections is investigated based on a 40-member ensemble from the Community Earth System Model Large Ensemble (CESM-LE) project. A large uncertainty is identified among ensemble members due to internal variability. The inter-member diversity is associated with a zonal dipole pattern of sea surface temperature (SST) change in the mean along the equator, which is similar to the second empirical orthogonal function (EOF) mode of tropical Pacific decadal variability (TPDV) in the unforced control simulation. The uncertainty in CESM-LE is comparable in magnitude to that among models of the Coupled Model Intercomparison Project phase 5 (CMIP5), suggesting the contribution of internal variability to the intermodel uncertainty in ENSO amplitude change. However, the causations between changes in ENSO amplitude and the mean state are distinct between CESM-LE and CMIP5 ensemble. The CESM-LE results indicate that a large ensemble of 15 members is needed to separate the relative contributions to ENSO amplitude change over the twenty-first century between forced response and internal variability.

International Large-Scale Assessment Studies and Educational Policy-Making in Chile: Contexts and Dimensions of Influence

Science.gov (United States)

Cox, Cristián; Meckes, Lorena

2016-01-01

Since the 1990s, Chile has participated in all major international large-scale assessment studies (ILSAs) of the IEA and OECD, as well as the regional ones conducted by UNESCO in Latin America, after it had been involved in the very first international Science Study in 1970-1971. This article examines the various ways in which these studies have…

Study of SUSY particles properties at the future International Linear Collider with the International Large Detector

International Nuclear Information System (INIS)

Wichmann, K.

2009-01-01

Recently, Letters of Intent (LoI) for experiments at the International Linear Collider (ILC) have been submitted. Among the three proposals is the International Large Detector (ILD) concept which is at the focus of these studies. From various subjects addressed in the LoI, a wide spectrum of studies of SUSY particle properties is presented here. Most of them are benchmark reactions for the ILC and can be used both in physics studies and in work on detector design and optimization, respectively. All studies were performed with a full detector simulation using GEANT4, which is a great improvement compared to the previous results with much less detailed, so called f ast , simulation (SIMDET). The importance of this improved simulation is reflected in the results. The presented analyzes have been chosen to be the most challenging for the detector to study its performance and guide the detector development. Additionally an important problem of unavoidable beam induced backgrounds at linear colliders is addressed and ways of reducing its impact on physics studies are shown for an example SUSY analysis. (author)

Overpressure generation by load transfer following shale framework weakening due to smectite diagenesis

Science.gov (United States)

Lahann, R.W.; Swarbrick, R.E.

2011-01-01

Basin model studies which have addressed the importance of smectite conversion to illite as a source of overpressure in the Gulf of Mexico have principally relied on a single-shale compaction model and treated the smectite reaction as only a fluid-source term. Recent fluid pressure interpretation and shale petrology studies indicate that conversion of bound water to mobile water, dissolution of load-bearing grains, and increased preferred orientation change the compaction properties of the shale. This results in substantial changes in effective stress and fluid pressure. The resulting fluid pressure can be 1500-3000psi higher than pressures interpreted from models based on shallow compaction trends. Shale diagenesis changes the mineralogy, volume, and orientation of the load-bearing grains in the shale as well as the volume of bound water. This process creates a weaker (more compactable) grain framework. When these changes occur without fluid export from the shale, some of the stress is transferred from the grains onto the fluid. Observed relationships between shale density and calculated effective stress in Gulf of Mexico shelf wells confirm these changes in shale properties with depth. Further, the density-effective stress changes cannot be explained by fluid-expansion or fluid-source processes or by prediagenesis compaction, but are consistent with a dynamic diagenetic modification of the shale mineralogy, texture, and compaction properties during burial. These findings support the incorporation of diagenetic modification of compaction properties as part of the fluid pressure interpretation process. ?? 2011 Blackwell Publishing Ltd.

Standard Errors for National Trends in International Large-Scale Assessments in the Case of Cross-National Differential Item Functioning

Science.gov (United States)

Sachse, Karoline A.; Haag, Nicole

2017-01-01

Standard errors computed according to the operational practices of international large-scale assessment studies such as the Programme for International Student Assessment's (PISA) or the Trends in International Mathematics and Science Study (TIMSS) may be biased when cross-national differential item functioning (DIF) and item parameter drift are…

On the study of petroleum system operation: contribution of a two-dimensional modeling; Contribution a l`etude du fonctionnement des systemes petroliers: apport d`une modelisation bi-dimensionnelle

Energy Technology Data Exchange (ETDEWEB)

Burrus, J

1997-07-10

The aim of the thesis is to validate concepts used in hydrocarbon generation and migration models; the model considered is the Temispack model developed by IFP, and the validation is based on the investigation of the thermal and hydraulic evolution in various sedimentary basins. It is shown that, in general, the thermal history of sediments is influenced by external processes (sedimentation rates, lithology, climate changes, regional-scale groundwater circulations) which frequently overprint internal processes (variations of crustal/mantle heat flow). It is found that external processes can frequently explain past thermal events that were erroneously attributed to internal causes (tectonic-thermal events). The origin of over-pressures in young basins with high sedimentation rates is shown to be generally related to compaction disequilibrium. Shale permeability values calibrated against overpressure profiles are consistent with experimental constraints. Compaction models predict too-high porosity in over-pressured sediments; this inconsistency is shown to be related to an inadequate definition of the Biot coefficient. In intracratonic basins with low sedimentation rates, diagenesis and fracturing are responsible for the large variability of shale permeability. Hydrocarbon generation models based on Arrhenius kinetics, and kinetic parameters calibrated on Rock Eval pyrolysis experiments are shown to be consistent with observations. Hydrocarbon expulsion and migration can be approximated by a multiphase Darcy equation using pseudo relative permeabilities. Migration pathways are shown to be very sensitive to the stratigraphic organization of basins. The volume 1 presents a bibliographical review, the Temispack model, and the geodynamics of a passive-type margin, the Gulf of Lion

Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach Nuclear Power Plant, Units 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Laudenbach, D.H.

1979-03-01

The technical evaluation is presented for the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach nuclear power plant, Units 1 and 2. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Support Program being conducted for the U.S. Nuclear Regulatory Commission by Lawrence Livermore Laboratory.

Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach Nuclear Power Plant, Units 1 and 2

International Nuclear Information System (INIS)

Laudenbach, D.H.

1979-03-01

The technical evaluation is presented for the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach nuclear power plant, Units 1 and 2. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Support Program being conducted for the U.S. Nuclear Regulatory Commission by Lawrence Livermore Laboratory

Generation of weakly nonlinear nonhydrostatic internal tides over large topography: a multi-modal approach

Directory of Open Access Journals (Sweden)

R. Maugé

2008-03-01

Full Text Available A set of evolution equations is derived for the modal coefficients in a weakly nonlinear nonhydrostatic internal-tide generation problem. The equations allow for the presence of large-amplitude topography, e.g. a continental slope, which is formally assumed to have a length scale much larger than that of the internal tide. However, comparison with results from more sophisticated numerical models show that this restriction can in practice be relaxed. It is shown that a topographically induced coupling between modes occurs that is distinct from nonlinear coupling. Nonlinear effects include the generation of higher harmonics by reflection from boundaries, i.e. steeper tidal beams at frequencies that are multiples of the basic tidal frequency. With a seasonal thermocline included, the model is capable of reproducing the phenomenon of local generation of internal solitary waves by a tidal beam impinging on the seasonal thermocline.

Measured air overpressures, soil-particle pressures, and slumps during the pre-ASIAGO U2Ar stemming experiment

Energy Technology Data Exchange (ETDEWEB)

Freynik, H.S. Jr.; Roach, D.R.; Dittbenner, G.R.

1978-01-04

On November 15, 1976, Lawrence Livermore Laboratory completed its first comprehensive stemming experiment for measuring downhole parameters while varying fill material and rate. Stemming can be defined as backfilling a hole in which a device has been placed to prevent leakage of radioactive materials or gases to the surface. A computer code is being developed for stemming operations, and this experiment was designed to measure parameters under different stemming conditions so the code could be verified and modified. The experiment was conducted in the lower half of a steel-cased, 4-ft-diam, 2000-ft-deep hole at Nevada Test Site. The two stemming materials used in the experiment, Overton sand and LLL II mix, were tested at three fill rates. Significant results of this experiment included successful measurement of downhole air overpressures, vertical and horizontal soil-particle pressures, and temperature. Vertical soil-particle pressures were higher than expected. All surface measurements were valid. The slump-displacement measurements system provided a timing mark to indicate the occurrence of a slump. A major slump occurred on the third day of stemming; a minor slump occurred on the fourth day.

Measured air overpressures, soil-particle pressures, and slumps during the pre-ASIAGO U2Ar stemming experiment

International Nuclear Information System (INIS)

Freynik, H.S. Jr.; Roach, D.R.; Dittbenner, G.R.

1978-01-01

On November 15, 1976, Lawrence Livermore Laboratory completed its first comprehensive stemming experiment for measuring downhole parameters while varying fill material and rate. Stemming can be defined as backfilling a hole in which a device has been placed to prevent leakage of radioactive materials or gases to the surface. A computer code is being developed for stemming operations, and this experiment was designed to measure parameters under different stemming conditions so the code could be verified and modified. The experiment was conducted in the lower half of a steel-cased, 4-ft-diam, 2000-ft-deep hole at Nevada Test Site. The two stemming materials used in the experiment, Overton sand and LLL II mix, were tested at three fill rates. Significant results of this experiment included successful measurement of downhole air overpressures, vertical and horizontal soil-particle pressures, and temperature. Vertical soil-particle pressures were higher than expected. All surface measurements were valid. The slump-displacement measurements system provided a timing mark to indicate the occurrence of a slump. A major slump occurred on the third day of stemming; a minor slump occurred on the fourth day

Investigation of a hydrogen mitigation system during large break loss-of-coolant accident for a two-loop pressurized water reactor

Energy Technology Data Exchange (ETDEWEB)

Dehjourian, Mehdi; Rahgoshay, Mohmmad; Jahanfamia, Gholamreza [Dept. of Nuclear Engineering, Science and Research Branch, Islamic Azad University of Tehran, Tehran (Iran, Islamic Republic of); Sayareh, Reza [Faculty of Electrical and Computer Engineering, Kerman Graduate University of Technology, Kerman (Iran, Islamic Republic of); Shirani, Amir Saied [Faculty of Engineering, Shahid Beheshti University, Tehran (Iran, Islamic Republic of)

2016-10-15

Hydrogen release during severe accidents poses a serious threat to containment integrity. Mitigating procedures are necessary to prevent global or local explosions, especially in large steel shell containments. The management of hydrogen safety and prevention of over-pressurization could be implemented through a hydrogen reduction system and spray system. During the course of the hypothetical large break loss-of-coolant accident in a nuclear power plant, hydrogen is generated by a reaction between steam and the fuel-cladding inside the reactor pressure vessel and also core concrete interaction after ejection of melt into the cavity. The MELCOR 1.8.6 was used to assess core degradation and containment behavior during the large break loss-of-coolant accident without the actuation of the safety injection system except for accumulators in Beznau nuclear power plant. Also, hydrogen distribution in containment and performance of hydrogen reduction system were investigated.

Contemporary large-scale international design competitions1 in China. A case study of Baietan, Guangzhou

Directory of Open Access Journals (Sweden)

Zheng Liang

2013-12-01

Full Text Available The importance of contemporary design competitions has been increasingly recognized in fast-growing China in the course of World Trade Organization (WTO integration and globalization. However, scientific and systematic analysis is rare on how international design competitions are introduced, and how they interact and transplant in the Chinese context. The well-known Chinese-Western culture gap and complicated social and political background make this topic more challenging. Herein, the authors focus on how the international design competitions were “translated” into both international and local perspectives with a compara­tive analysis on development of international design competitions between the Chinese and the Finnish model. To fully exemplify the design-completion procedure and the different roles of Chinese stakeholders and their perspectives on design competitions, the authors study the Baietan case, which was chosen due to its specific relationship with the city’s strategic plan, its representativeness in using international design competitions in connection to large-scale urban projects in China and its public access to the relevant documentation. The preliminary findings suggest that Chinese-style design competitions, acting as ‘designed trading zones’, with less-defined competition rules compared to the Finnish model, may foster the settings of local transformation in adopting international urban planning and design knowledge. However, an integrated approach is required to address subsequent implementation.

Numerical investigation of the reactor pressure vessel behaviour under severe accident conditions taking into account the combined processes of the vessel creep and the molten pool natural convection

International Nuclear Information System (INIS)

Loktionov, V.D.; Mukhtarov, E.S.; Yaroshenko, N.I.; Orlov, V.E.

1999-01-01

Analysis of the WWER lower head behaviour and its failure has been performed for several molten pool structures and internal overpressure levels in a reactor pressure vessel (RPV). The different types of the molten pools (homogeneous, conventionally homogeneous, conventionally stratified, stratified) cover the bounding scenarios during a hypothetical severe accident. The parametric investigations of the failure mode and RPV behaviour for various molten pool types, its heights and internal overpressure levels are presented herein. A coupled treatment in this investigation includes: (i) a 2-D thermohydraulic analysis of a molten pool natural convection. Domestic NARAUFEM code has been used in this detailed analysis for prediction of the heat flux from the molten pool to the RPV inner surface; and (ii) a detailed 3-D transient thermal analysis of the RPV lower head. Domestic 3-D ASHTER-VVR finite element code has been used for the numerical simulations of the high temperature creep and failure of the lower head. The effect of an external RPV cooling, temperature-dependent physical properties of the molten pool and vessel steel, the hydrostatic forces and vessel dead-weight were taken into account in this study. The obtained results show that lower head failure occurs as a result of the vessel creep process which is significantly dependent on both an internal overpressure level and the type of molten pool structure. In particular, it was found that there were combinations of 'overpressure-molten pool structure' when the vessel failure started at the 'hot' layers of the vessel. (orig.)

Probabilistic fracture mechanics analysis of boiling water reactor vessel for cool-down and low temperature over-pressurization transients

Energy Technology Data Exchange (ETDEWEB)

Park, Jeong Soon; Choi, Young Hwan; Jhung, Myung Jo [Safety Research Division, Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2016-04-15

The failure probabilities of the reactor pressure vessel (RPV) for low temperature over-pressurization (LTOP) and cool-down transients are calculated in this study. For the cool-down transient, a pressure-temperature limit curve is generated in accordance with Section XI, Appendix G of the American Society of Mechanical Engineers (ASME) code, from which safety margin factors are deliberately removed for the probabilistic fracture mechanics analysis. Then, sensitivity analyses are conducted to understand the effects of some input parameters. For the LTOP transient, the failure of the RPV mostly occurs during the period of the abrupt pressure rise. For the cool-down transient, the decrease of the fracture toughness with temperature and time plays a main role in RPV failure at the end of the cool-down process. As expected, the failure probability increases with increasing fluence, Cu and Ni contents, and initial reference temperature-nil ductility transition (RTNDT). The effect of warm prestressing on the vessel failure probability for LTOP is not significant because most of the failures happen before the stress intensity factor reaches the peak value while its effect reduces the failure probability by more than one order of magnitude for the cool-down transient.

Growth Chambers on the International Space Station for Large Plants

Science.gov (United States)

Massa, Gioia D.; Wheeler, Raymond M.; Morrow, Robert C.; Levine, Howard G.

2016-01-01

The International Space Station (ISS) now has platforms for conducting research on horticultural plant species under LED (Light Emitting Diodes) lighting, and those capabilities continue to expand. The Veggie vegetable production system was deployed to the ISS as an applied research platform for food production in space. Veggie is capable of growing a wide array of horticultural crops. It was designed for low power usage, low launch mass and stowage volume, and minimal crew time requirements. The Veggie flight hardware consists of a light cap containing red (630 nanometers), blue, (455 nanometers) and green (530 nanometers) LEDs. Interfacing with the light cap is an extendable bellowsbaseplate for enclosing the plant canopy. A second large plant growth chamber, the Advanced Plant Habitat (APH), is will fly to the ISS in 2017. APH will be a fully controllable environment for high-quality plant physiological research. APH will control light (quality, level, and timing), temperature, CO2, relative humidity, and irrigation, while scrubbing any cabin or plant-derived ethylene and other volatile organic compounds. Additional capabilities include sensing of leaf temperature and root zone moisture, root zone temperature, and oxygen concentration. The light cap will have red (630 nm), blue (450 nm), green (525 nm), far red (730 nm) and broad spectrum white LEDs (4100K). There will be several internal cameras (visible and IR) to monitor and record plant growth and operations. Veggie and APH are available for research proposals.

International trade causes large net economic losses in tropical countries via the destruction of ecosystem services.

Science.gov (United States)

Chang, Junning; Symes, William S; Lim, Felix; Carrasco, L Roman

2016-05-01

Despite the large implications of the use of tropical land for exports ("land absorption") on ecosystem services (ES) and global biodiversity conservation, the magnitude of these externalities is not known. We quantify the net value of ES lost in tropical countries as a result of cropland, forestland and pastureland absorption for exports after deducting ES gains through imports ("land displacement"). We find that net ES gains occur only in 7 out of the 41 countries and regions considered. We estimate global annual net losses of over 1.7 x 10(12) international dollars (I$) (I$1.1 x 10(12) if carbon-related services are not considered). After deducting the benefits from agricultural, forest and livestock rents in land replacing tropical forests, the net annual losses are I$1.3 and I$0.7 x 10(12), respectively. The results highlight the large magnitude of tropical ES losses through international trade that are not compensated by the rents of land uses in absorbed land.

PERCEPTION OF INTERN TEACHERS’ USE OF INTERACTIVE STRATEGIES IN TEACHING LARGE CLASSES IN ONLINE ENVIRONMENT

Directory of Open Access Journals (Sweden)

Carol Adaku Obiefuna

2015-07-01

Full Text Available Higher education institutions experience large classes despite the National Universities’ Commission’s (NUC and other supervisory agencies emphasis on carrying capacity of the institutions in Nigeria. The overpopulation affects effective teaching and learning and quality assurance. This study focused on perception of intern teachers of the use of interactive strategies in teaching Curriculum Studies in an online environment in a College of Education. 200 computer science students (intern teachers in a Curriculum Studies class formed the study sample. Three research questions guided the study. A structured and validated questionnaire with reliability index of 0.79, made up of 25 items constructed on a four-point Likert-type scale was administered on the students for data collection. The data were analysed using simple mean and the results showed that the intern teachers supported the use of the teaching strategies in an online class as a complement to the face to face method of teaching. They are also recommended as alternative strategies to reduce the problems associated with large classes. However, the research subjects were sceptical about the implementation of online teaching as a result of power supply and access to internet facilities. The findings have a far reaching implication for the 21st Century teaching and learning. Suggestions towards effective online teaching and learning were made especially with theGovernment’s reiteration of the need for Information and Communication Technology (ICT in the schools in Nigeria.

Latest developments on the highly granular Silicon-Tungsten Electromagnetic Calorimeter technological prototype for the International Large Detector

CERN Document Server

Irles, Adrián

2017-01-01

High precision physics at future colliders requires unprecedented highly granular calorimeters for the application of the Particle Flow (PF) algorithm. The physical proof of concept was given in the previous campaign of beam tests of physic prototypes within the CALICE collaboration. We present here the latest beam and laboratory test results and R&D developments for the Silicon-Tungsten Electromagnetic Calorimeter technological prototype with fully embedded very front-end (VFE) electronics for the International Large Detector at the International Linear Collider project.

Does internal variability change in response to global warming? A large ensemble modelling study of tropical rainfall

Science.gov (United States)

Milinski, S.; Bader, J.; Jungclaus, J. H.; Marotzke, J.

2017-12-01

There is some consensus on mean state changes of rainfall under global warming; changes of the internal variability, on the other hand, are more difficult to analyse and have not been discussed as much despite their importance for understanding changes in extreme events, such as droughts or floodings. We analyse changes in the rainfall variability in the tropical Atlantic region. We use a 100-member ensemble of historical (1850-2005) model simulations with the Max Planck Institute for Meteorology Earth System Model (MPI-ESM1) to identify changes of internal rainfall variability. To investigate the effects of global warming on the internal variability, we employ an additional ensemble of model simulations with stronger external forcing (1% CO2-increase per year, same integration length as the historical simulations) with 68 ensemble members. The focus of our study is on the oceanic Atlantic ITCZ. We find that the internal variability of rainfall over the tropical Atlantic does change due to global warming and that these changes in variability are larger than changes in the mean state in some regions. From splitting the total variance into patterns of variability, we see that the variability on the southern flank of the ITCZ becomes more dominant, i.e. explaining a larger fraction of the total variance in a warmer climate. In agreement with previous studies, we find that changes in the mean state show an increase and narrowing of the ITCZ. The large ensembles allow us to do a statistically robust differentiation between the changes in variability that can be explained by internal variability and those that can be attributed to the external forcing. Furthermore, we argue that internal variability in a transient climate is only well defined in the ensemble domain and not in the temporal domain, which requires the use of a large ensemble.

The Contribution of International Large-Scale Assessments to Educational Research: Combining Individual and Institutional Data Sources

Science.gov (United States)

Strietholt, Rolf; Scherer, Ronny

2018-01-01

The present paper aims to discuss how data from international large-scale assessments (ILSAs) can be utilized and combined, even with other existing data sources, in order to monitor educational outcomes and study the effectiveness of educational systems. We consider different purposes of linking data, namely, extending outcomes measures,…

Longitudinal variations of laryngeal overpressure and voice-related quality of life in spasmodic dysphonia.

Science.gov (United States)

Yeung, Jeffrey C; Fung, Kevin; Davis, Eric; Rai, Sunita K; Day, Adam M B; Dzioba, Agnieszka; Bornbaum, Catherine; Doyle, Philip C

2015-03-01

Adductor spasmodic dysphonia (AdSD) is a voice disorder characterized by variable symptom severity and voice disability. Those with the disorder experience a wide spectrum of symptom severity over time, resulting in varied degrees of perceived voice disability. This study investigated the longitudinal variability of AdSD, with a focus on auditory-perceptual judgments of a dimension termed laryngeal overpressure (LO) and patient self-assessments of voice-related quality of life (V-RQOL). Longitudinal, correlational study. Ten adults with AdSD were followed over three time periods. At each, both voice samples and self-ratings of V-RQOL were gathered prior to their scheduled Botox injection. Voice recordings subsequently were perceptually evaluated by eight listeners for LO using a visual analog scale. LO ratings for all-voiced and Rainbow Passage sentence stimuli were found to be highly correlated. However, only the LO ratings obtained from judgments of AV stimuli were found to correlate moderately with self-ratings of voice disability for both the physical functioning and social-emotional subscores, as well as the total V-RQOL score. Based on perceptual judgments, LO appears to provide a reliable means of quantifying the severity of voice abnormalities in AdSD. Variability in self-ratings of the V-RQOL suggest that perceived disability related to AdSD should be actively monitored. Further, auditory-perceptual judgments may provide an accurate index of the potential impact of the disorder on the speaker. Similarly, LO was supported as a simple clinical measure that serves as a reliable index of voice change over time. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Some thoughts on the management of large, complex international space ventures

Science.gov (United States)

Lee, T. J.; Kutzer, Ants; Schneider, W. C.

1992-01-01

Management issues relevant to the development and deployment of large international space ventures are discussed with particular attention given to previous experience. Management approaches utilized in the past are labeled as either simple or complex, and signs of efficient management are examined. Simple approaches include those in which experiments and subsystems are developed for integration into spacecraft, and the Apollo-Soyuz Test Project is given as an example of a simple multinational approach. Complex approaches include those for ESA's Spacelab Project and the Space Station Freedom in which functional interfaces cross agency and political boundaries. It is concluded that individual elements of space programs should be managed by individual participating agencies, and overall configuration control is coordinated by level with a program director acting to manage overall objectives and project interfaces.

International safeguards in large-scale nuclear facilities

International Nuclear Information System (INIS)

Gupta, D.; Heil, J.

1977-01-01

The trend in the energy sector in most of the world's industrialized areas shows rather clearly that the rate of installing nuclear plants will be very high and that the largest possible units of nuclear material handling and storage facilities will be built. Various experiments and analyses of measurement methods relevant to safeguards in typical nuclear facilities such as a fuel reprocessing or a fabrication plant have shown that the associated measurement errors as obtained under normal operating conditions are such that they are mainly dominated by systematic errors, which may lie in the range of percentages of the measured amount so that a material balance in such a plant could not normally be closed with any higher accuracy. For example, in a reprocessing plant with a throughput of 1500t U/a and a corresponding throughput of 15t Pu/a, a systematic error of 1% would cause a measurement uncertainty of around 70kg Pu in case a material balance is struck twice a year. Such a large amount may be considered to be unacceptable from the point of view of international safeguards since it arises out of a single plant. The simplest way of getting around the problem would be to strike a material balance more frequently over a given period. This could, however, lead to an enormous increase in the technical and financial burden for the operator of a facility. This paper analyses this problem in some detail for some facilities and shows that, for example, with a properly developed information system in such plants and a combination of containment, surveillance and accountancy measures, a safeguards system can be built up for such facilities. (author)

Experimental study of hydraulic ram effects on a liquid storage tank: Analysis of overpressure and cavitation induced by a high-speed projectile.

Science.gov (United States)

Lecysyn, Nicolas; Bony-Dandrieux, Aurélia; Aprin, Laurent; Heymes, Frédéric; Slangen, Pierre; Dusserre, Gilles; Munier, Laurent; Le Gallic, Christian

2010-06-15

This work is part of a project for evaluating catastrophic tank failures caused by impacts with a high-speed solid body. Previous studies on shock overpressure and drag events have provided analytical predictions, but they are not sufficient to explain ejection of liquid from the tank. This study focuses on the hydrodynamic behavior of the liquid after collision to explain subsequent ejection of liquid. The study is characterized by use of high-velocity projectiles and analysis of projectile dynamics in terms of energy loss to tank contents. New tests were performed at two projectile velocities (963 and 1255 m s(-1)) and over a range of viscosities (from 1 to 23.66 mPa s) of the target liquid. Based on data obtained from a high-speed video recorder, a phenomenological description is proposed for the evolution of intense pressure waves and cavitation in the target liquids. Copyright 2010 Elsevier B.V. All rights reserved.

Large-scale tests of aqueous scrubber systems for LMFBR vented containment

International Nuclear Information System (INIS)

McCormack, J.D.; Hilliard, R.K.; Postma, A.K.

1980-01-01

Six large-scale air cleaning tests performed in the Containment Systems Test Facility (CSTF) are described. The test conditions simulated those postulated for hypothetical accidents in an LMFBR involving containment venting to control hydrogen concentration and containment overpressure. Sodium aerosols were generated by continously spraying sodium into air and adding steam and/or carbon dioxide to create the desired Na 2 O 2 , Na 2 CO 3 or NaOH aerosol. Two air cleaning systems were tested: (a) spray quench chamber, educator venturi scrubber and high efficiency fibrous scrubber in series; and (b) the same except with the spray quench chamber eliminated. The gas flow rates ranged up to 0.8 m 3 /s (1700 acfm) at temperatures to 313 0 C (600 0 F). Quantities of aerosol removed from the gas stream ranged up to 700 kg per test. The systems performed very satisfactorily with overall aerosol mass removal efficiencies exceeding 99.9% in each test

A GASFLOW analysis of a steam explosion accident in a typical light-water reactor confinement building

International Nuclear Information System (INIS)

Travis, J.R.; Wilson, T.L.; Spore, J.W.; Lam, K.L.; Rao, D.V.

1994-01-01

Steam over-pressurization resulting from ex-vessel steam explosion (fuel-coolant interaction) may pose a serious challenge to the integrity of a typical light-water reactor confinement building. If the steam generation rate exceeds the removal capacity of the Airborne Activity Confinement System, confinement overpressurization occurs. Thus, there is a large potential for an uncontrolled and unfiltered release of fission products from the confinement atmosphere to the environment at the time of the steam explosion. The GASFLOW computer code was used to analyze the effects of a hypothetical steam explosion and the transport of steam and hydrogen throughout a typical light-water reactor confinement building. The effects of rapid pressurization and the resulting forces on the internal structures and the heat exchanger service bay hatch covers were calculated. Pressurization of the ventilation system and the potential damage to the ventilation fans and high-efficiency particulate air filters were assessed. Because of buoyancy forces and the calculated confinement velocity field, the hydrogen diffuses and mixes in the confinement atmosphere but tends to be transported to its upper region. (author). 2 refs., 14 figs

The nurses' self-concept instrument (NSCI): a comparison of domestic and international student nurses' professional self-concepts from a large Australian University.

Science.gov (United States)

Angel, Elizabeth; Craven, Rhonda; Denson, Nida

2012-08-01

Professional self-concept is a critical driver of job satisfaction. In Australia, as international nursing enrolments rise, nursing is increasingly characterised by a professional body of international nurses who may differ from domestic Australian nurses in their nursing self-concept. At present, little is known about the extent to which domestic and international students nurses' self-concepts may differ. The present study aimed to elucidate and contrast domestic and international nursing students' self-concepts from one large Australian university. A total of 253 domestic (n=218) and international (n=35) undergraduate nursing students from a large public university in Sydney, Australia completed the Nurses' Self-Concept Instrument (NSCI). Multiple-Indicator-Multiple-Indicator-Cause (MIMIC) modelling was used to assess the effects of student group (domestic and international) on the latent self-concept factors of the NSCI. Domestic and international students' professional self-concepts were similarly high. MIMIC modelling demonstrated that domestic students had a higher patient care self-concept in comparison to international students. Results imply that it may be useful for Australian universities to foster strategies that enhance specific domains of self-concepts (e.g., care) which may be underdeveloped for at least some cultural groups within the international nursing student population compared with domestic nursing students. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of large scale internal reforming molten carbonate fuel cell

Energy Technology Data Exchange (ETDEWEB)

Sasaki, A.; Shinoki, T.; Matsumura, M. [Mitsubishi Electric Corp., Hyogo (Japan)

1996-12-31

Internal Reforming (IR) is a prominent scheme for Molten Carbonate Fuel Cell (MCFC) power generating systems in order to get high efficiency i.e. 55-60% as based on the Higher Heating Value (HHV) and compact configuration. The Advanced Internal Reforming (AIR) technology has been developed based on two types of the IR-MCFC technology i.e. Direct Internal Reforming (DIR) and Indirect Internal Reforming (DIR).

Heat and momentum transport of ion internal transport barrier plasmas on Large Helical Device

International Nuclear Information System (INIS)

Nagaoka, K.; Ida, K.; Yoshinuma, M.

2010-11-01

The peaked ion-temperature profile with steep gradient so called ion internal transport barrier (ion ITB) was formed in the neutral beam heated plasmas on the Large Helical Device (LHD) and the high-ion-temperature regime of helical plasmas has been significantly extended. The ion thermal diffusivity in the ion ITB plasma decreases down to the neoclassical transport level. The heavy ion beam probe (HIBP) observed the smooth potential profile with negative radial electric field (ion root) in the core region where the ion thermal diffusivity decreases significantly. The large toroidal rotation was also observed in the ion ITB core and the transport of toroidal momentum was analyzed qualitatively. The decrease of momentum diffusivity with ion temperature increase was observed in the ion ITB core. The toroidal rotation driven by ion temperature gradient so called intrinsic rotation is also identified. (author)

Large Matched-Index-of-Refraction (MIR) Flow Systems for International Collaboration In Fluid Mechanics

International Nuclear Information System (INIS)

McEligot, Donald M.; Becker, Stefan; McIlroy, Hugh M. Jr.

2010-01-01

In recent international collaboration, INL and Uni. Erlangen have developed large MIR flow systems which can be ideal for joint graduate student education and research. The benefit of the MIR technique is that it permits optical measurements to determine flow characteristics in complex passages and around objects to be obtained without locating a disturbing transducer in the flow field and without distortion of the optical paths. The MIR technique is not new itself; others employed it earlier. The innovation of these MIR systems is their large size relative to previous experiments, yielding improved spatial and temporal resolution. This report will discuss the benefits of the technique, characteristics of the systems and some examples of their applications to complex situations. Typically their experiments have provided new fundamental understanding plus benchmark data for assessment and possible validation of computational thermal fluid dynamic codes.

Large Matched-Index-of-Refraction (MIR) Flow Systems for International Collaboration In Fluid Mechanics

Energy Technology Data Exchange (ETDEWEB)

Donald M. McEligot; Stefan Becker; Hugh M. McIlroy, Jr.

2010-07-01

In recent international collaboration, INL and Uni. Erlangen have developed large MIR flow systems which can be ideal for joint graduate student education and research. The benefit of the MIR technique is that it permits optical measurements to determine flow characteristics in complex passages and around objects to be obtained without locating a disturbing transducer in the flow field and without distortion of the optical paths. The MIR technique is not new itself; others employed it earlier. The innovation of these MIR systems is their large size relative to previous experiments, yielding improved spatial and temporal resolution. This report will discuss the benefits of the technique, characteristics of the systems and some examples of their applications to complex situations. Typically their experiments have provided new fundamental understanding plus benchmark data for assessment and possible validation of computational thermal fluid dynamic codes.

High density high performance plasma with internal diffusion barrier in Large Helical Device

International Nuclear Information System (INIS)

Sakamoto, R.; Kobayashi, M.; Miyazawa, J.

2008-10-01

A attractive high density plasma operational regime, namely an internal diffusion barrier (IDB), has been discovered in the intrinsic helical divertor configuration on the Large Helical Device (LHD). The IDB which enables core plasma to access a high density/high pressure regime has been developed. It is revealed that the IDB is reproducibly formed by pellet fueling in the magnetic configurations shifted outward in major radius. Attainable central plasma density exceeds 1x10 21 m -3 . Central pressure reaches 1.5 times atmospheric pressure and the central β value becomes fairly high even at high magnetic field, i.e. β(0)=5.5% at B t =2.57 T. (author)

The internal disruption as hard Magnetohydrodynamic limit of 1/2 sawtooth like activity in large helical device

Energy Technology Data Exchange (ETDEWEB)

Varela, J. [Department of Physics, Universidad Carlos III, 28911 Leganes, Madrid (Spain); Watanabe, K. Y.; Ohdachi, S. [National Institute for Fusion Science, Oroshi-cho 322-6, Toki 509-5292 (Japan)

2012-08-15

Large helical device (LHD) inward-shifted configurations are unstable to resistive MHD pressure-gradient-driven modes. Sawtooth like activity was observed during LHD operation. The main drivers are the unstable modes 1/2 and 1/3 in the middle and inner plasma region which limit the plasma confinement efficiency of LHD advanced operation scenarios. The aim of the present research is to study the hard MHD limit of 1/2 sawtooth like activity, not observed yet in LHD operation, and to predict its effects on the device performance. Previous investigations pointed out this system relaxation can be an internal disruption [J. Varela et al., 'Internal disruptions and sawtooth like activity in LHD,' 38th EPS Conference on Plasma Physics (2011), P5.077]. In the present work, we simulate an internal disruption; we study the equilibria properties before and after the disruptive process, its effects on the plasma confinement efficiency during each disruptive phase, the relation between the n/m = 1/2 hard MHD events and the soft MHD events, and how to avoid or reduce their adverse effects. The simulation conclusions point out that the large stochastic region in the middle plasma strongly deforms and tears the flux surfaces when the pressure gradient increases above the hard MHD limit. If the instability reaches the inner plasma, the iota profiles will be perturbed near the plasma core and three magnetic islands can appear near the magnetic axis. If the instability is strong enough to link the stochastic regions in the middle plasma (around the half minor radius {rho}) and the plasma core ({rho}<0.25), an internal disruption is driven.

ACE puts containment venting systems to the test

International Nuclear Information System (INIS)

Merilo, M.

1990-01-01

Filtered venting of reactor containments has received considerable attention recently as a method for avoiding containment failure due to overpressure during severe accidents. Several proposed filtration devices have been tested in the internationally sponsored Advanced Containment Experiments (ACE) programme, such that a self consistent comparison of the aerosol removal characteristics of these systems could be obtained. Considering the different design, requirements and operating conditions of the filter devices, a direct comparison is not possible, nor appropriate. Nevertheless, large scale models, using full scale elements of the various devices whenever feasible, have been tested with consistent mixtures of aerosols and carrier gases. (author)

Selection and use of contraceptive methods among internal migrant workers in three large Chinese cities: a workplace-based survey.

Science.gov (United States)

Zhao, Hong-Xin; Wu, Jun-Qing; Li, Yu-Yan; Zhang, Yu-Feng; Ye, Jiang-Feng; Zhan, Shao-Kang; Zheng, Xiao-Ying; Yang, Ting-Zhong

2011-08-01

To describe the current status of the decision-making process with regard to the use of contraceptive methods among internal migrant workers in three large Chinese cities. A total of 4313 sexually active internal migrant workers were recruited in Beijing, Shanghai, and Chengdu. Information on contraceptive use was collected by means of questionnaires. Contraceptive prevalence was 86% among unmarried sexually active migrant workers and 91% among married workers. The main contraceptive methods used by married migrants were the intrauterine device (51%), condoms (25%) and female/male sterilisation (17%); the main methods resorted to by unmarried, sexually active migrants were condoms (74%) and oral contraceptives (11%). The contraceptive method applied by 20% of married respondents had been selected by other people, without they themselves having their share in an informed choice. Adopting the contraceptive decisions made by others was associated with being a married migrant, a construction or service worker, a rural-urban migrant, a migrant living in collective or rented rooms, or a migrant with more children. Many internal migrants in these large cities did not choose their contraceptive method on their own. Efforts enabling and encouraging migrants to make informed choices are needed.

Fundamentals of boiling water reactor systems

International Nuclear Information System (INIS)

Mattern, J.

1976-01-01

The reactor assembly consists of the reactor vessel, its internal components of the core, shroud, steam separator, dryer assemblies, feedwater spargers, internal recirculation pumps and control rod drive housings. Connected to the steam lines are the pressure relief valves which protect the pressure boundary from damage due to overpressure. (orig./TK) [de

Large-scale international validation of the ADO index in subjects with COPD

DEFF Research Database (Denmark)

Puhan, Milo A; Hansel, Nadia N; Sobradillo, Patricia

2012-01-01

BACKGROUND: Little evidence on the validity of simple and widely applicable tools to predict mortality in patients with chronic obstructive pulmonary disease (COPD) exists. OBJECTIVE: To conduct a large international study to validate the ADO index that uses age, dyspnoea and FEV(1) to predict 3......-IV. MEASUREMENTS: We validated the original ADO index. We then obtained an updated ADO index in half of our cohorts to improve its predictive accuracy, which in turn was validated comprehensively in the remaining cohorts using discrimination, calibration and decision curve analysis and a number of sensitivity......-to-moderate risk of 3-year mortality than FEV(1) alone. INTERPRETATION: The updated 15-point ADO index accurately predicts 3-year mortality across the COPD severity spectrum and can be used to inform patients about their prognosis, clinical trial study design or benefit harm assessment of medical interventions....

Feasibility analysis of large length-scale thermocapillary flow experiment for the International Space Station

Science.gov (United States)

Alberts, Samantha J.

The investigation of microgravity fluid dynamics emerged out of necessity with the advent of space exploration. In particular, capillary research took a leap forward in the 1960s with regards to liquid settling and interfacial dynamics. Due to inherent temperature variations in large spacecraft liquid systems, such as fuel tanks, forces develop on gas-liquid interfaces which induce thermocapillary flows. To date, thermocapillary flows have been studied in small, idealized research geometries usually under terrestrial conditions. The 1 to 3m lengths in current and future large tanks and hardware are designed based on hardware rather than research, which leaves spaceflight systems designers without the technological tools to effectively create safe and efficient designs. This thesis focused on the design and feasibility of a large length-scale thermocapillary flow experiment, which utilizes temperature variations to drive a flow. The design of a helical channel geometry ranging from 1 to 2.5m in length permits a large length-scale thermocapillary flow experiment to fit in a seemingly small International Space Station (ISS) facility such as the Fluids Integrated Rack (FIR). An initial investigation determined the proposed experiment produced measurable data while adhering to the FIR facility limitations. The computational portion of this thesis focused on the investigation of functional geometries of fuel tanks and depots using Surface Evolver. This work outlines the design of a large length-scale thermocapillary flow experiment for the ISS FIR. The results from this work improve the understanding thermocapillary flows and thus improve technological tools for predicting heat and mass transfer in large length-scale thermocapillary flows. Without the tools to understand the thermocapillary flows in these systems, engineers are forced to design larger, heavier vehicles to assure safety and mission success.

The Limits and Possibilities of International Large-Scale Assessments. Education Policy Brief. Volume 9, Number 2, Spring 2011

Science.gov (United States)

Rutkowski, David J.; Prusinski, Ellen L.

2011-01-01

The staff of the Center for Evaluation & Education Policy (CEEP) at Indiana University is often asked about how international large-scale assessments influence U.S. educational policy. This policy brief is designed to provide answers to some of the most frequently asked questions encountered by CEEP researchers concerning the three most popular…

Attenuated total internal reflection infrared microspectroscopic imaging using a large-radius germanium internal reflection element and a linear array detector.

Science.gov (United States)

Patterson, Brian M; Havrilla, George J

2006-11-01

The number of techniques and instruments available for Fourier transform infrared (FT-IR) microspectroscopic imaging has grown significantly over the past few years. Attenuated total internal reflectance (ATR) FT-IR microspectroscopy reduces sample preparation time and has simplified the analysis of many difficult samples. FT-IR imaging has become a powerful analytical tool using either a focal plane array or a linear array detector, especially when coupled with a chemometric analysis package. The field of view of the ATR-IR microspectroscopic imaging area can be greatly increased from 300 x 300 microm to 2500 x 2500 microm using a larger internal reflection element of 12.5 mm radius instead of the typical 1.5 mm radius. This gives an area increase of 70x before aberrant effects become too great. Parameters evaluated include the change in penetration depth as a function of beam displacement, measurements of the active area, magnification factor, and change in spatial resolution over the imaging area. Drawbacks such as large file size will also be discussed. This technique has been successfully applied to the FT-IR imaging of polydimethylsiloxane foam cross-sections, latent human fingerprints, and a model inorganic mixture, which demonstrates the usefulness of the method for pharmaceuticals.

How International Large-Scale Skills Assessments Engage with National Actors: Mobilising Networks through Policy, Media and Public Knowledge

Science.gov (United States)

Hamilton, Mary

2017-01-01

This paper examines how international, large-scale skills assessments (ILSAs) engage with the broader societies they seek to serve and improve. It looks particularly at the discursive work that is done by different interest groups and the media through which the findings become part of public conversations and are translated into usable form in…

Simulation of overpressure events with a Laguna Verde model for the RELAP code to conditions of extended power up rate

International Nuclear Information System (INIS)

Rodriguez H, A.; Araiza M, E.; Fuentes M, L.; Ortiz V, J.

2012-10-01

In this work the main results of the simulation of overpressure events are presented using a model of the nuclear power plant of Laguna Verde developed for the RELAP/SCDAPSIM code. As starting point we have the conformation of a Laguna Verde model that represents a stationary state to similar conditions to the operation of the power station with Extended Power Up rate (EPU). The transitory of simulated pressure are compared with those documented in the Final Safety Analysis Report of Laguna Verde (FSAR). The results of the turbine shot transitory with and without by-pass of the main turbine are showed, and the event of closes of all the valves of main vapor isolation. A preliminary simulation was made and with base in the results some adjustments were made for the operation with EPU, taking into account the Operation Technical Specifications of the power station. The results of the final simulations were compared and analyzed with the content in the FSAR. The response of the power station to the transitory, reflected in the model for RELAP, was satisfactory. Finally, comments about the improvement of the model are included, for example, the response time of the protection and mitigation systems of the power station. (Author)

The numerical simulation of the WWER-440/V-213 reactor pressure vessel internals response to maximum hypothetical large break loss of coolant accident

International Nuclear Information System (INIS)

Hermansky, P.; Krajcovic, M.

2012-01-01

The reactor internals are designed to ensure cooling of the fuel, to ensure the movement of emergency control assemblies under all operating conditions including accidents and facilitate removal of the fuel and of the internals following an accident This paper presents results of the numerical simulation of the WWER-440/V213 reactor vessel internals dynamic response to maximum hypothetical Large-Break Loss of Coolant Accident. The purpose of this analysis is to determine the reactor vessel internals response due to rapid depressurization and to prove no such deformations occur in the reactor vessel internals which would prevent timely and proper activation of the emergency control assemblies. (Authors)

Annular Internal-External-Expansion Rocket Nozzles for Large Booster Applications

Science.gov (United States)

Connors, James F.; Cubbison, Robert W.; Mitchell, Glenn A.

1961-01-01

For large-thrust booster applications, annular rocket nozzles employing both internal and external expansion are investigated. In these nozzles, free-stream air flows through the center as well as around the outside of the exiting jet. Flaps for deflecting the rocket exhaust are incorporated on the external-expansion surface for thrust-vector control. In order to define nozzle off-design performance, thrust vectoring effectiveness, and external stream effects, an experimental investigation was conducted on two annular nozzles with area ratios of 15 and 25 at Mach 0, 2, and 3 in the Lewis 10- by 10-foot wind tunnel. Air, pressurized to 600 pounds per square inch absolute, was used to simulate the exhaust flow. For a nozzle-pressure-ratio range of 40 to 1000, the ratio of actual to ideal thrust was essentially constant at 0.98 for both nozzles. Compared with conventional convergent-divergent configurations on hypothetical boost missions, the performance gains of the annular nozzle could yield significant orbital payload increases (possibly 8 to 17 percent). A single flap on the external-expansion surface of the area-ratio-25 annular nozzle produced a side force equal to 4 percent of the axial force with no measurable loss in axial thrust.

Outcome of emergency endovascular treatment of large internal iliac artery aneurysms with guidewires

International Nuclear Information System (INIS)

Cambj-Sapunar, Liana; Maskovic, Josip; Brkljacic, Boris; Radonic, Vedran; Dragicevic, Dragan; Ajduk, Marko

2010-01-01

Purpose: Guidewires have been reported as a useful occlusion material for large aneurysms of different locations with good short-term results. In this study we retrospectively evaluate long-term results of emergency embolization technique with guidewires in symptomatic internal iliac artery aneurysm (IIAA) impending rupture. Patients and methods: In four patients presented with acute abdominal pain, multidetector computed tomography revealed unstable, 7-14 cm large, IIAAs. Two patients were treated with coil embolization of distal branches followed by occlusion of aneurysmal sac with guidewires. In two patients embolization of aneurysmal sac alone was performed. Results: In three patients complete or near complete occlusion of the aneurysmal sac was achieved and abdominal pain ceased within hours. Two patients treated with embolization of distal iliac artery branches and aneurysmal sac developed claudication that lasted up to 1 year. Their aneurysms remained thrombosed and they were without symptoms until they died 31 and 56 months later of causes unrelated to IIAA. Two patients treated with embolization of the aneurysm alone were free of ischemic symptoms. Because of incomplete embolization of the sac in one patient open surgery treatment in a non-emergency setting was performed. Complete filling of aneurysmal sac was achieved in other patient but 2 years later his aneurysm re-opened and required open surgery treatment. Conclusion: Embolization of aneurysmal sac of large IIAA with guidewires may be effective for immediate treatment of impending rupture. Long-term results were better when embolization of the aneurysmal sac was combined with embolization of distal IIA branches.

A large outbreak of shigellosis commencing in an internally displaced population, Papua New Guinea, 2013.

Science.gov (United States)

Benny, Edwin; Mesere, Kelly; Pavlin, Boris I; Yakam, Logan; Ford, Rebecca; Yoannes, Mition; Kisa, Debbie; Abdad, Mohammad Y; Menda, Lincoln; Greenhill, Andrew R; Horwood, Paul F

2014-01-01

The objective of this study was to investigate a large outbreak of shigellosis in Papua New Guinea that began in a camp for internally displaced persons before spreading throughout the general community. Outbreak mitigation strategies were implemented in the affected area to curtail the spread of the disease. Data were collected from the surveillance system and analysed by time, place and person. Rectal swab samples were tested by standard culture methods and real-time polymerase chain reaction to determine the etiology of the outbreak. Laboratory analysis at two independent institutions established that the outbreak was caused by Shigella sp., with one strain further characterized as Shigella flexneri serotype 2. Approximately 1200 suspected cases of shigellosis were reported in a two-month period from two townships in Morobe Province, Papua New Guinea. The outbreak resulted in at least five deaths, all in young children. This outbreak of shigellosis highlights the threat of enteric diseases to vulnerable populations such as internally displaced persons in Papua New Guinea, as has been observed in other global settings.

A large outbreak of shigellosis commencing in an internally displaced population, Papua New Guinea, 2013

Directory of Open Access Journals (Sweden)

Edwin Benny

2014-09-01

Full Text Available Objective: The objective of this study was to investigate a large outbreak of shigellosis in Papua New Guinea that began in a camp for internally displaced persons before spreading throughout the general community. Methods: Outbreak mitigation strategies were implemented in the affected area to curtail the spread of the disease. Data were collected from the surveillance system and analysed by time, place and person. Rectal swab samples were tested by standard culture methods and real-time polymerase chain reaction to determine the etiology of the outbreak. Results: Laboratory analysis at two independent institutions established that the outbreak was caused by Shigella sp., with one strain further characterized as Shigella flexneri serotype 2. Approximately 1200 suspected cases of shigellosis were reported in a two-month period from two townships in Morobe Province, Papua New Guinea. The outbreak resulted in at least five deaths, all in young children. Discussion: This outbreak of shigellosis highlights the threat of enteric diseases to vulnerable populations such as internally displaced persons in Papua New Guinea, as has been observed in other global settings.

Irreversible deformation and its incidence on the hydraulic properties of clays

International Nuclear Information System (INIS)

Celerier, B.; Raynaud, S.; Ghoreychi, M.

1998-01-01

Natural fluid overpressures occurring in fine grained sediments can be released by two different mechanisms: large scale natural hydro-fracturing or smaller scale damages associated with dilatancy that enhance permeability. This second mechanism is discussed. An experimental work is currently under way to define the conditions under which dilatancy sufficiently enhances permeability to release overpressures without requiring large fractures. Re-moulded clays are first consolidated to high pressures (20 MPa) in an oedometric cell. They are then loaded in a triaxial apparatus where a stress path leading to dilatancy is applied, and the permeability is monitored by measuring fluid flows. The evolution of the pore space is further analysed by X-ray tomography and microstructural observations. (author)

Large-scale international validation of the ADO index in subjects with COPD: an individual subject data analysis of 10 cohorts

DEFF Research Database (Denmark)

Puhan, Milo A; Hansel, Nadia N; Sobradillo, Patricia

2012-01-01

Background: Little evidence on the validity of simple and widely applicable tools to predict mortality in patients with chronic obstructive pulmonary disease (COPD) exists.Objective: To conduct a large international study to validate the ADO index that uses age, dyspnoea and FEV1 to predict 3-yea...

Scale Effect of Premixed Methane-Air Combustion in Confined Space Using LES Model

Directory of Open Access Journals (Sweden)

Liang Wang

2015-12-01

Full Text Available Gas explosion is the most hazardous incident occurring in underground airways. Computational Fluid Dynamics (CFD techniques are sophisticated in simulating explosions in confined spaces; specifically, when testing large-scale gaseous explosions, such as methane explosions in underground mines. The dimensions of a confined space where explosions could occur vary significantly. Thus, the scale effect on explosion parameters is worth investigating. In this paper, the impact of scaling on explosion overpressures is investigated by employing two scaling factors: The Gas-fill Length Scaling Factor (FLSF and the Hydraulic Diameter Scaling Factor (HDSF. The combinations of eight FLSFs and five HDSFs will cover a wide range of space dimensions where flammable gas could accumulate. Experiments were also conducted to evaluate the selected numerical models. The Large Eddy Simulation turbulence model was selected because it shows accuracy compared to the widely used Reynolds’ averaged models for the scenarios investigated in the experiments. Three major conclusions can be drawn: (1 The overpressure increases with both FLSF and HDSF within the deflagration regime; (2 In an explosion duct with a length to diameter ratio greater than 54, detonation is more likely to be triggered for a stoichiometric methane/air mixture; (3 Overpressure increases as an increment hydraulic diameter of a geometry within deflagration regime. A relative error of 7% is found when predicting blast peak overpressure for the base case compared to the experiment; a good agreement for the wave arrival time is also achieved.

Numerical simulation of mechanical compaction of deepwater shallow sediments

Science.gov (United States)

Sun, Jin; Wu, Shiguo; Deng, Jingen; Lin, Hai; Zhang, Hanyu; Wang, Jiliang; Gao, Jinwei

2018-02-01

To study the compaction law and overpressure evolution in deepwater shallow sediments, a large-strain compaction model that considers material nonlinearity and moving boundary is formulated. The model considers the dependence of permeability and material properties on void ratio. The modified Cam-Clay model is selected as the constitutive relations of the sediments, and the deactivation/reactivation method is used to capture the moving top surface during the deposition process. A one-dimensional model is used to study the compaction law of the shallow sediments. Results show that the settlement of the shallow sediments is large under their own weight during compaction. The void ratio decreases strictly with burial depth and decreases more quickly near the seafloor than in the deeper layers. The generation of abnormal pressure in the shallow flow sands is closely related to the compaction law of shallow sediments. The two main factors that affect the generation of overpressure in the sands are deposition rate and permeability of overlying clay sediments. Overpressure increases with an increase in deposition rate and a decrease in the permeability of the overlying clay sediment. Moreover, an upper limit for the overpressure exists. A two-dimensional model is used to study the differential compaction of the shallow sediments. The pore pressure will still increase due to the inflow of the pore fluid from the neighboring clay sediment even though the deposition process is interrupted.

Forecasting in strategic international marketing. Conception for and application to the construction of large-scale pollution abatement installations

International Nuclear Information System (INIS)

Tressin, J.M.

1992-01-01

Division of labour continues to progress worldwide, particularly in the European economy, where it is an accompainment to the steady growth of transnational trade relations. In this situation forecasts attain great importance for companies facing structural decisions. This holds not only for large international concerns but also increasingly for medium-sized companies. The methodological approaches adopted by such companies are primarily aimed at reducing the risk of wrong decisions by gathering information and incorporating forecasts in their planning and decision-making processes. The present article describes various forecasting methods, exemplifying them for the area of commercial-sized building projects. Due to the great complexity of such installations and discontinuities in developments in international markets, quantitative forecasting methods and models are only of limited value here. In contrast to this, qualitative methods such as those provided by expert systems and contemporary dp tools for data collection and compression have attained great importance for the design of practiable and reliable forecasting systems. The present study thus lays have the interface between international marketing and corporate planning and decision-making processes. (orig.) [de

Understanding vented gas explosions

Energy Technology Data Exchange (ETDEWEB)

Lautkaski, R. [VTT Energy, Espoo (Finland). Energy Systems

1997-12-31

The report is an introduction to vented gas explosions for nonspecialists, particularly designers of plants for flammable gases and liquids. The phenomena leading to pressure generation in vented gas explosions in empty and congested rooms are reviewed. The four peak model of vented gas explosions is presented with simple methods to predict the values of the individual peaks. Experimental data on the external explosion of dust and gas explosions is discussed. The empirical equation relating the internal and external peak pressures in vented dust explosions is shown to be valid for gas explosion tests in 30 m{sup 3} and 550 m{sup 3} chambers. However, the difficulty of predicting the internal peak pressure in large chambers remains. Methods of explosion relief panel design and principles of vent and equipment layout to reduce explosion overpressures are reviewed. (orig.) 65 refs.

Understanding vented gas explosions

Energy Technology Data Exchange (ETDEWEB)

Lautkaski, R [VTT Energy, Espoo (Finland). Energy Systems

1998-12-31

The report is an introduction to vented gas explosions for nonspecialists, particularly designers of plants for flammable gases and liquids. The phenomena leading to pressure generation in vented gas explosions in empty and congested rooms are reviewed. The four peak model of vented gas explosions is presented with simple methods to predict the values of the individual peaks. Experimental data on the external explosion of dust and gas explosions is discussed. The empirical equation relating the internal and external peak pressures in vented dust explosions is shown to be valid for gas explosion tests in 30 m{sup 3} and 550 m{sup 3} chambers. However, the difficulty of predicting the internal peak pressure in large chambers remains. Methods of explosion relief panel design and principles of vent and equipment layout to reduce explosion overpressures are reviewed. (orig.) 65 refs.

8th International Symposium on Intelligent Distributed Computing & Workshop on Cyber Security and Resilience of Large-Scale Systems & 6th International Workshop on Multi-Agent Systems Technology and Semantics

CERN Document Server

Braubach, Lars; Venticinque, Salvatore; Badica, Costin

2015-01-01

This book represents the combined peer-reviewed proceedings of the Eight International Symposium on Intelligent Distributed Computing - IDC'2014, of the Workshop on Cyber Security and Resilience of Large-Scale Systems - WSRL-2014, and of the Sixth International Workshop on Multi-Agent Systems Technology and Semantics- MASTS-2014. All the events were held in Madrid, Spain, during September 3-5, 2014. The 47 contributions published in this book address several topics related to theory and applications of the intelligent distributed computing and multi-agent systems, including: agent-based data processing, ambient intelligence, collaborative systems, cryptography and security, distributed algorithms, grid and cloud computing, information extraction, knowledge management, big data and ontologies, social networks, swarm intelligence or videogames amongst others.

A study on damage effect from boiling liquid expanding vapor explosion(Believe) of LPG charging facility

Energy Technology Data Exchange (ETDEWEB)

Roh, Sam Kew; Ham, Eun Gu [Dept. of Architectural Engineering, Kwangwoon University (Korea); Kim, Tae Hwan [Automation System Research Institute, Seoul (Korea)

1999-12-01

The LPG refueling station's explosion at Bucheon city was a major accident which with rare frequency of occurrence and large damage effect. Therefore, to prevent similar accident in the future from LPG charging stations which located in urban area. It needs to identify the damage effects of such facilities by comparing theoretically quantities risk and actual damage. The BLEVE effects from the accident showed similar damage effect in case of heat flux, however, the overpressure level reflected at the reduced distance by 15%. The structure damage to the near by area showed comparatively large heat radiation damage to the concrete structure strength and shape changes through heat flux while the overpressure effect was small. 13 refs., 4 figs., 4 tabs.

Low-impedance internal linear inductive antenna for large-area flat panel display plasma processing

International Nuclear Information System (INIS)

Kim, K.N.; Jung, S.J.; Lee, Y.J.; Yeom, G.Y.; Lee, S.H.; Lee, J.K.

2005-01-01

An internal-type linear inductive antenna, that is, a double-comb-type antenna, was developed for a large-area plasma source having the size of 1020 mmx830 mm, and high density plasmas on the order of 2.3x10 11 cm -3 were obtained with 15 mTorr Ar at 5000 W of inductive power with good plasma stability. This is higher than that for the conventional serpentine-type antenna, possibly due to the low impedance, resulting in high efficiency of power transfer for the double-comb antenna type. In addition, due to the remarkable reduction of the antenna length, a plasma uniformity of less than 8% was obtained within the substrate area of 880 mmx660 mm at 5000 W without having a standing-wave effect

Seismic texture and amplitude analysis of large scale fluid escape pipes using time lapses seismic surveys: examples from the Loyal Field (Scotland, UK)

Science.gov (United States)

Maestrelli, Daniele; Jihad, Ali; Iacopini, David; Bond, Clare

2016-04-01

Fluid escape pipes are key features of primary interest for the analysis of vertical fluid flow and secondary hydrocarbon migration in sedimentary basin. Identified worldwide (Løset et al., 2009), they acquired more and more importance as they represent critical pathways for supply of methane and potential structure for leakage into the storage reservoir (Cartwright & Santamarina, 2015). Therefore, understanding their genesis, internal characteristics and seismic expression, is of great significance for the exploration industry. Here we propose a detailed characterization of the internal seismic texture of some seal bypass system (e.g fluid escape pipes) from a 4D seismic survey (released by the BP) recently acquired in the Loyal Field. The seal by pass structure are characterized by big-scale fluid escape pipes affecting the Upper Paleogene/Neogene stratigraphic succession in the Loyal Field, Scotland (UK). The Loyal field, is located on the edge of the Faroe-Shetland Channel slope, about 130 km west of Shetland (Quadrants 204/205 of the UKCS) and has been recently re-appraised and re developed by a consortium led by BP. The 3D detailed mapping analysis of the full and partial stack survey (processed using amplitude preservation workflows) shows a complex system of fluid pipe structure rooted in the pre Lista formation and developed across the paleogene and Neogene Units. Geometrical analysis show that pipes got diameter varying between 100-300 m and a length of 500 m to 2 km. Most pipes seem to terminate abruptly at discrete subsurface horizons or in diffuse termination suggesting multiple overpressured events and lateral fluid migration (through Darcy flows) across the overburden units. The internal texture analysis of the large pipes, (across both the root and main conduit zones), using near, medium and far offset stack dataset (processed through an amplitude preserved PSTM workflow) shows a tendency of up-bending of reflection (rather than pulls up artefacts

Understanding Business Interests in International Large-Scale Student Assessments: A Media Analysis of "The Economist," "Financial Times," and "Wall Street Journal"

Science.gov (United States)

Steiner-Khamsi, Gita; Appleton, Margaret; Vellani, Shezleen

2018-01-01

The media analysis is situated in the larger body of studies that explore the varied reasons why different policy actors advocate for international large-scale student assessments (ILSAs) and adds to the research on the fast advance of the global education industry. The analysis of "The Economist," "Financial Times," and…

Managing the development of plant subsystems for a large international project

International Nuclear Information System (INIS)

Gurd, D.

2012-01-01

ITER is an international collaborative project under development by nations representing over one half of the world's population. Major components will be supplied by 'Domestic Agencies' representing the various participating countries. While the supervisory control system, known as CODAC, will be developed 'in fund' by the International Organization at the project site in the south of France, the EPICS and PLC-based plant control subsystems are to be developed and tested locally, where the subsystems themselves are being built. This is similar to the model used for the development of the Spallation Neutron Source, which was a US national collaboration. However the much more complex constraints of an international collaboration preclude the use of many specifics of the SNS collaboration approach. Moreover, procedures for final system integration and commissioning at ITER are not yet well defined. This paper will outline the particular issues either inherent in an international collaboration or specific to ITER, and will suggest approaches to mitigate those problems with the goal of assuring a successful and timely integration and commissioning phase. (author)

International comparative studies of education and large scale change

NARCIS (Netherlands)

Howie, Sarah; Plomp, T.; Bascia, Nina; Cumming, Alister; Datnow, Amanda; Leithwood, Kenneth; Livingstone, David

2005-01-01

The development of international comparative studies of educational achievements dates back to the early 1960s and was made possible by developments in sample survey methodology, group testing techniques, test development, and data analysis (Husén & Tuijnman, 1994, p. 6). The studies involve

Argue internal audit on how to promote the nuclear power enterprise internal control

International Nuclear Information System (INIS)

Li Xiaoming

2012-01-01

In order to strengthen and standardize enterprise internal control, improve the management level and risk prevention ability, five departments jointly established the basic rules of internal control in enterprises, large and medium-sized enterprises as the national power enterprise, the enterprise internal audit executive power in strengthening and perfecting internal control, and in the enterprise internal control of play an active role. (author)

Earthquake induced variations in extrusion rate: A numerical modeling approach to the 2006 eruption of Merapi Volcano (Indonesia)

Science.gov (United States)

Carr, Brett B.; Clarke, Amanda B.; de'Michieli Vitturi, Mattia

2018-01-01

the dome to Merapi's crater and subsequent large dome collapses. The corresponding reductions in confining pressure caused increased extrusion rates that rapidly rebuilt the dome and led to further collapses, a feedback cycle that prolonged the eruption. In a more general sense, this study demonstrates that both internal changes, such as magma volatile content and overpressure, and external forces, such as edifice collapse and regional earthquakes, can affect variations in eruption intensity. Further, we also demonstrate how these external forces can initiate internal changes and how these parameters may interact with one another in a feedback scenario.

Track distortion in a micromegas based large prototype of a Time Projection Chamber for the International Linear Collider

International Nuclear Information System (INIS)

Bhattacharya, Deb Sankar; Majumdar, Nayana; Sarkar, S.; Bhattacharya, S.; Mukhopadhyay, Supratik; Bhattacharya, P.; Attie, D.; Colas, P.; Ganjour, S.; Bhattacharya, Aparajita

2016-01-01

The principal particle tracker at the International Linear Collider (ILC) is planned to be a large Time Projection Chamber (TPC) where different Micro Pattern Gaseous Detector (MPGDs) candidate as the gaseous amplifier. A Micromegas (MM) based TPC can meet the ILC requirement of continuous and precise pattern recognition. Seven MM modules, working as the end-plate of a Large Prototype TPC (LPTPC) installed at DESY, have been tested with a 5 GeV electron beam. Due to the grounded peripheral frame of the MM modules, at low drift, the electric field lines near the detector edge remain no longer parallel to the TPC axis. This causes signal loss along the boundaries of the MM modules as well as distortion in the reconstructed track. In presence of magnetic field, the distorted electric field introduces ExB effect

Well-posedness of the Cauchy problem for models of large amplitude internal waves

International Nuclear Information System (INIS)

Guyenne, Philippe; Lannes, David; Saut, Jean-Claude

2010-01-01

We consider in this paper the 'shallow-water/shallow-water' asymptotic model obtained in Choi and Camassa (1999 J. Fluid Mech. 396 1–36), Craig et al (2005 Commun. Pure. Appl. Math. 58 1587–641) (one-dimensional interface) and Bona et al (2008 J. Math. Pures Appl. 89 538–66) (two-dimensional interface) from the two-layer system with rigid lid, for the description of large amplitude internal waves at the interface of two layers of immiscible fluids of different densities. For one-dimensional interfaces, this system is of hyperbolic type and its local well-posedness does not raise serious difficulties, although other issues (blow-up, loss of hyperbolicity, etc) turn out to be delicate. For two-dimensional interfaces, the system is nonlocal. Nevertheless, we prove that it conserves some properties of 'hyperbolic type' and show that the associated Cauchy problem is locally well posed in suitable Sobolev classes provided some natural restrictions are imposed on the data. These results are illustrated by numerical simulations with emphasis on the formation of shock waves

Results of the international Large Coil Task: a milestone for superconducting magnets in fusion power

International Nuclear Information System (INIS)

Dresner, L.; Fietz, W.A.; Gauss, S.

1989-01-01

The aim of the Large Coil Task (LCT) was to demonstrate the reliable operation of large superconducting toroidal field coils and to prove the design principles and fabrication techniques to be applied for the magnets in a tokamak experimental power reactor. This has been achieved by an international development effort involving the US DOE, EURATOM, JAERI and the Swiss government. Six different D-shaped test coils were separately designed, developed and constructed by the LCT participants, then extensively tested together in a compact toroidal array. Detailed information on coil design and manufacture and all test data were shared among the LCT participants. The full six-coil array tests were carried out in a continuous period from the beginning of 1986 until September 1987. Beside the originally planned tests to reach an 8 T design point performance, the tests went well beyond this goal, reaching 9 T peak field in each coil. The experiments also delineated the limits of operability and demonstrated the coil safety under abnormal conditions. For fusion application the transient a.c. field behaviour in the coils was also of great interest. Three of the coils have been tested in this respect and showed excellent performance, with loss values in agreement with the theoretical predictions. (author)

Application of k0-based internal monostandard NAA for large sample analysis of clay pottery. As a part of inter comparison exercise

International Nuclear Information System (INIS)

Acharya, R.; Dasari, K.B.; Pujari, P.K.; Swain, K.K.; Shinde, A.D.; Reddy, A.V.R.

2014-01-01

As a part of inter comparison exercise of an IAEA Coordinated Research Project on large sample neutron activation analysis, a large size and non standard geometry size pottery replica (obtained from Peru) was analyzed by k 0 -based internal monostandard neutron activation analysis (IM-NAA). Two large size sub samples (0.40 and 0.25 kg) were irradiated at graphite reflector position of AHWR Critical Facility in BARC, Trombay, Mumbai, India. Small samples (100-200 mg) were also analyzed by IM-NAA for comparison purpose. Radioactive assay was carried out using a 40 % relative efficiency HPGe detector. To examine homogeneity of the sample, counting was also carried out using X-Z rotary scanning unit. In situ relative detection efficiency was evaluated using gamma rays of the activation products in the irradiated sample in the energy range of 122-2,754 keV. Elemental concentration ratios with respect to Na of small size (100 mg mass) as well as large size (15 and 400 g) samples were used to check the homogeneity of the samples. Concentration ratios of 18 elements such as K, Sc, Cr, Mn, Fe, Co, Zn, As, Rb, Cs, La, Ce, Sm, Eu, Yb, Lu, Hf and Th with respect to Na (internal mono standard) were calculated using IM-NAA. Absolute concentrations were arrived at for both large and small samples using Na concentration, obtained from relative method of NAA. The percentage combined uncertainties at ±1 s confidence limit on the determined values were in the range of 3-9 %. Two IAEA reference materials SL-1 and SL-3 were analyzed by IM-NAA to evaluate accuracy of the method. (author)

Simulations of hydraulic fracturing and leakage in sedimentary basins

Energy Technology Data Exchange (ETDEWEB)

Lothe, Ane Elisabeth

2004-01-01

Hydraulic fracturing and leakage of water through the caprock is described from sedimentary basin over geological time scale. Abnormal pressure accumulations reduce the effective stresses in the underground and trigger the initiation of hydraulic fractures. The major faults in the basin define these pressure compartments. In this Thesis, basin simulations of hydraulic fracturing and leakage have been carried out. A simulator (Pressim) is used to calculate pressure generation and dissipitation between the compartments. The flux between the compartments and not the flow within the compartments is modelled. The Griffith-Coulomb failure criterion determines initial failure at the top structures of overpressured compartments, whereas the frictional sliding criterion is used for reactivation along the same fractures. The minimum horizontal stress is determined from different formulas, and an empirical one seems to give good results compared to measured pressures and minimum horizontal stresses. Simulations have been carried out on two datasets; one covering the Halten Terrace area and one the Tune Field area in the northern North Sea. The timing of hydraulic fracturing and amount of leakage has been quantified in the studies from the Halten Terrace area. This is mainly controlled by the lateral fluid flow and the permeability of the major faults in the basin. Low fault permeability gives early failure, while high fault permeabilities results in no or late hydraulic fracturing and leakage from overpressured parts of the basin. In addition to varying the transmissibility of all faults in a basin, the transmissibility across individual faults can be varied. Increasing the transmissibility across faults is of major importance in overpressured to intermediately pressured areas. However, to obtain change in the flow, a certain pressure difference has to be the situation between the different compartments. The coefficient of internal friction and the coefficient of frictional

Brain Vulnerability to Repeated Blast Overpressure and Polytrauma

Science.gov (United States)

2014-11-01

detail elsewhere.13,41 After silver staining, sections were washed thoroughly in distilled water, mounted on gelatin -coated slides, and counterstained...neuropathological changes resulting from a single BOP exposure are modest and largely consist of limited fiber degeneration that is evident in silver -stained...Walter Reed Army Institute of Research, Silver Spring, MD 20910 Age-dependent variations in the pathophysiology of blast-induced traumatic brain

Managerial Attention in International SMEs

NARCIS (Netherlands)

Fan, Jiasi

2017-01-01

Managerial attention affects organizational strategies and the resulting consequences. In the international business context, it is noted that how much attention managers give to the international marketplace, i.e., international attention, has profound implications for large global companies’

A Large-Acceptance Detector System for Electron Scattering from Polarized Internal targets.

NARCIS (Netherlands)

Passchier, E.; Bouwhuis, M.; Choi, S.; Zhou, Z.L.; Alarcon, R.; Anghinolfi, M.; Botto, T.; van den Brand, J.F.J.; Bulten, H.J.; Dimitroyannis, D.; Doets, M.; Ent, R.; Ferro Luzzi, M.M.E.; Higinbotham, D.W.; de Jager, C.W.; Lang, J.; de Lange, D.J.; Nikolenko, D.; Nooren, G.J.; Papadakis, N.; Passchier, I.; Popov, S.G.; Rachek, I.; Ripani, M.; Steijger, J.J.M.; Taiuti, M.; Vodinas, N.; de Vries, H.

1997-01-01

The design and the performance of a non-magnetic detector setup for internal target physics at the NIKHEF electron-scattering facility is described. The detector setup, used in the first internal-target experiment at the AmPS ring, measures the spin dependence in the elastic and break-up reaction

Physics with large extra dimensions

Indian Academy of Sciences (India)

can then be accounted by the existence of large internal dimensions, in the sub- ... strongly coupled heterotic theory with one large dimension is described by a weakly ..... one additional U(1) factor corresponding to an extra 'U(1)' D-brane is ...

A method of controlling a large two-stroke turbocharged internal combustion engine and an engine for use in this method

Energy Technology Data Exchange (ETDEWEB)

Kjemtrup, N; Grone, O S

1994-03-03

A large two-stroke turbocharged internal combusted engine has a reactor for reduction of the NO[sub x]-content in the exhaust gas connected upstream of the turbocharger. At least one sensor measures at least one engine parameter and in a control unit it is determined whether the reactor is heated by the exhaust gas, which heating may cause reduced energy supply to the turbocharger. When this is the case the control unit opens for supply of supplementary air or gas to the engine which may be effected by starting an auxiliary blower and/or by actuating a control means in a bypass conduit so that a large amount of exhaust gas with a corresponding increase in the power is delivered to the turbocharger turbine. (author) figs.

What Is International about International Schools? An Institutional Legitimacy Perspective

Science.gov (United States)

Bunnell, Tristan; Fertig, Michael; James, Chris

2016-01-01

In recent years, the number of International Schools around the world has increased rapidly largely as a result of growth of new forms of International Schools, which differ markedly from the traditional forms. These new forms: are often operated on a for-profit commercial basis; are usually for children from the local (indigenous), wealthy…

The Large Marine Ecosystem Approach for 21st Century Ocean Health and International Sustainable Development

Science.gov (United States)

Honey, K. T.

2014-12-01

The global coastal ocean and watersheds are divided into 66 Large Marine Ecosystems (LMEs), which encompass regions from river basins, estuaries, and coasts to the seaward boundaries of continental shelves and margins of major currents. Approximately 80% of global fisheries catch comes from LME waters. Ecosystem goods and services from LMEs contribute an estimated US 18-25 trillion dollars annually to the global economy in market and non-market value. The critical importance of these large-scale systems, however, is threatened by human populations and pressures, including climate change. Fortunately, there is pragmatic reason for optimism. Interdisciplinary frameworks exist, such as the Large Marine Ecosystem (LME) approach for adaptive management that can integrate both nature-centric and human-centric views into ecosystem monitoring, assessment, and adaptive management practices for long-term sustainability. Originally proposed almost 30 years ago, the LME approach rests on five modules are: (i) productivity, (ii) fish and fisheries, (iii) pollution and ecosystem health, (iv) socioeconomics, and (v) governance for iterative adaptive management at a large, international scale of 200,000 km2 or greater. The Global Environment Facility (GEF), World Bank, and United Nations agencies recognize and support the LME approach—as evidenced by over 3.15 billion in financial assistance to date for LME projects. This year of 2014 is an exciting milestone in LME history, after 20 years of the United Nations and GEF organizations adopting LMEs as a unit for ecosystem-based approaches to management. The LME approach, however, is not perfect. Nor is it immutable. Similar to the adaptive management framework it propones, the LME approach itself must adapt to new and emerging 21st Century technologies, science, and realities. The LME approach must further consider socioeconomics and governance. Within the socioeconomics module alone, several trillion-dollar opportunities exist

Neurology and international organizations.

Science.gov (United States)

Mateen, Farrah J

2013-07-23

A growing number of international stakeholders are engaged with neurologic diseases. This article provides a brief overview of important international stakeholders in the practice of neurology, including global disease-specific programs, United Nations agencies, governmental agencies with international influence, nongovernmental organizations, international professional organizations, large private donors, private-public partnerships, commercial interests, armed forces, and universities and colleges. The continued engagement of neurologists is essential for the growing number of international organizations that can and should incorporate neurologic disease into their global agendas.

Necessity of Internal Monitoring for Nuclear Medicine Staff in a Large Specialized Chinese Hospital.

Science.gov (United States)

Wang, Hong-Bo; Zhang, Qing-Zhao; Zhang, Zhen; Hou, Chang-Song; Li, Wen-Liang; Yang, Hui; Sun, Quan-Fu

2016-04-12

This work intends to quantify the risk of internal contaminations in the nuclear medicine staff of one hospital in Henan province, China. For this purpose, the criteria proposed by the International Atomic Energy Agency (IAEA) to determine whether it is necessary to conduct internal individual monitoring was applied to all of the 18 nuclear medicine staff members who handled radionuclides. The activity of different radionuclides used during a whole calendar year and the protection measures adopted were collected for each staff member, and the decision as to whether nuclear medicine staff in the hospital should be subjected to internal monitoring was made on the basis of the criteria proposed by IAEA. It is concluded that for all 18 members of the nuclear medicine staff in the hospital, internal monitoring is required. Internal exposure received by nuclear medicine staff should not be ignored, and it is necessary to implement internal monitoring for nuclear medicine staff routinely.

CSNI Project for Fracture Analyses of Large-Scale International Reference Experiments (Project FALSIRE)

International Nuclear Information System (INIS)

Bass, B.R.; Pugh, C.E.; Keeney-Walker, J.; Schulz, H.; Sievers, J.

1993-06-01

This report summarizes the recently completed Phase I of the Project for Fracture Analysis of Large-Scale International Reference Experiments (Project FALSIRE). Project FALSIRE was created by the Fracture Assessment Group (FAG) of Principal Working Group No. 3 (PWG/3) of the Organization for Economic Cooperation and Development (OECD)/Nuclear Energy Agency's (NEA's) Committee on the Safety of Nuclear Installations (CSNI). Motivation for the project was derived from recognition by the CSNI-PWG/3 that inconsistencies were being revealed in predictive capabilities of a variety of fracture assessment methods, especially in ductile fracture applications. As a consequence, the CSNI/FAG was formed to evaluate fracture prediction capabilities currently used in safety assessments of nuclear components. Members are from laboratories and research organizations in Western Europe, Japan, and the United States of America (USA). On behalf of the CSNI/FAG, the US Nuclear Regulatory Commission's (NRC's) Heavy-Section Steel Technology (HSST) Program at the Oak Ridge National Laboratory (ORNL) and the Gesellschaft fuer Anlagen--und Reaktorsicherheit (GRS), Koeln, Federal Republic of Germany (FRG) had responsibility for organization arrangements related to Project FALSIRE. The group is chaired by H. Schulz from GRS, Koeln, FRG

CSNI Project for Fracture Analyses of Large-Scale International Reference Experiments (Project FALSIRE)

Energy Technology Data Exchange (ETDEWEB)

Bass, B.R.; Pugh, C.E.; Keeney-Walker, J. [Oak Ridge National Lab., TN (United States); Schulz, H.; Sievers, J. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Gemany)

1993-06-01

This report summarizes the recently completed Phase I of the Project for Fracture Analysis of Large-Scale International Reference Experiments (Project FALSIRE). Project FALSIRE was created by the Fracture Assessment Group (FAG) of Principal Working Group No. 3 (PWG/3) of the Organization for Economic Cooperation and Development (OECD)/Nuclear Energy Agency`s (NEA`s) Committee on the Safety of Nuclear Installations (CSNI). Motivation for the project was derived from recognition by the CSNI-PWG/3 that inconsistencies were being revealed in predictive capabilities of a variety of fracture assessment methods, especially in ductile fracture applications. As a consequence, the CSNI/FAG was formed to evaluate fracture prediction capabilities currently used in safety assessments of nuclear components. Members are from laboratories and research organizations in Western Europe, Japan, and the United States of America (USA). On behalf of the CSNI/FAG, the US Nuclear Regulatory Commission`s (NRC`s) Heavy-Section Steel Technology (HSST) Program at the Oak Ridge National Laboratory (ORNL) and the Gesellschaft fuer Anlagen--und Reaktorsicherheit (GRS), Koeln, Federal Republic of Germany (FRG) had responsibility for organization arrangements related to Project FALSIRE. The group is chaired by H. Schulz from GRS, Koeln, FRG.

The effect of the novel internal-type linear inductive antenna for large area magnetized inductive plasma source

Science.gov (United States)

Lee, S. H.; Shulika, Olga.; Kim, K. N.; Yeom, G. Y.; Lee, J. K.

2004-09-01

As the technology of plasma processing progresses, there is a continuing demand for higher plasma density, uniformity over large areas and greater control over plasma parameters to optimize the processes of etching, deposition and surface treatment. Traditionally, the external planar ICP sources with low pressure high density plasma have limited scale-up capabilities due to its high impedance accompanied by the large antenna size. Also due to the cost and thickness of their dielectric material in order to generate uniform plasma. In this study the novel internal-type linear inductive antenna system (1,020mm¡¿830mm¡¿437mm) with permanent magnet arrays are investigated to improve both the plasma density and the uniformity of LAPS (Large Area Plasma Source) for FPD processing. Generally plasma discharges are enhanced because the inductance of the novel antenna (termed as the double comb antenna) is lower than that of the serpentine-type antenna and also the magnetic confinement of electron increases the power absorption efficiency. The uniformity is improved by reducing the standing wave effect. The total length of antenna is comparable to the driving rf wavelength to cause the plasma nonuniformity. To describe the discharge phenomenon we have developed a magnetized two-dimensional fluid simulation. This work was supported by National Research Laboratory (NRL) Program of the Korea Ministry of Science and Technology. [References] 1. J.K.Lee, Lin Meng, Y.K.Shin, H,J,Lee and T.H.Chung, ¡°Modeling and Simulation of a Large-Area Plasma Source¡±, Jpn. J. Appl. Phys. Vol.36(1997) pp. 5714-5723 2. S.E.Park, B.U.Cho, Y.J.Lee*, and G.Y.Yeom*, and J.K.Lee, ¡°The Characteristics of Large Area Processing Plasmas¡±, IEEE Trans. Plasma Sci., Vol.31 ,No.4(2003) pp. 628-637

A Study on the Optimization Method of the Main Steam Safety Valve Characteristics for Overpressure Protection

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyoung Ryun; Kim, Ung Soo; Pakr, Min Soo; Lee, Gyu Cheon; Kim, Shin Whan [KEPCO EnC Company Inc., Daejeon (Korea, Republic of)

2015-05-15

safety margin of overpressure protection. And this can be used as a good technical background for the design modification of NPPs.

Juris International

CERN Document Server

A database on international trade law aimed at lawyers and legal counsel in developing and transition economies. Juris International is a multilingual collection (English, Spanish, and French) of legal information on international trade. Juris International aims to facilitate and reduce the work involved in research for business lawyers, advisers and in-house counsel, and state organizations in developing nd transition economies, by providing access to texts which have often been difficult to obtain. Its objective is to gather a large quantity of basic information at one site (favoring complete legal texts), without the need to send for the information, and consequently without excessive communication costs for users who d benefit from an efficient and cheap telecommunications network.

Corporate governance, competition, the new international financial architecture and large corporations in emerging markets

OpenAIRE

Ajit Singh; Bruce Weisse; Alaka Singh

2002-01-01

This paper examines from the developing countries perspective important analytical and policy issues arising from: a) the current international discussions about corporate governance in relation to the New International Financial Architecture; b) changes in the international competitive environment being caused by the enormous international merger movement in advanced countries. The background to a) above is the emergence of corporate governance as a key issue in the current G7 proposals...

Study by similarity of wind influence on mass transfers in complex buildings; Etude par similitude de l'influence du vent sur les transferts de masse dans les batiments complexes

Energy Technology Data Exchange (ETDEWEB)

Le Roux, Nicolas

2011-12-05

Residential and industrial buildings equipped with a ventilation system are complex facilities, where various heat and mass transfers could occur according to the operating conditions. In order to study these mass transfers, a methodology has been developed so as to carry out reduced-scale experiments for the study of isothermal flows, in steady or transient state. This methodology has been numerically and experimentally validated on simple configurations, and then applied to two standard configurations, representing nuclear facilities. The wind influence on mass transfers inside these configurations, in normal, damaged (stopping ventilation) or accidental (internal overpressure) situations, has been studied in the Jules Verne climatic wind tunnel of the CSTB. The wind effects, coupled or not with an internal overpressure, can lead to a partial or a total loss of the pollutant's containment inside buildings. Moreover, the wind turbulence can bring about instantaneous reversal leakage flow-rates, which cannot be identified in steady state. In addition, the study of transient phenomena has highlighted the low influence of the branch inertia on transient flows, for typical values of real facilities. Finally, tracer tests have been carried out in order to study the pollutant dispersion inside a standard configuration subjected to wind, mechanical ventilation and internal overpressure effects. The reliability of the zonal code SYLVIA, used notably to support safety assessment in nuclear buildings, has been analyzed from these experimental results. The modelling of the physical phenomena experimentally observed has been validated, in steady and transient states. However, limitations have been identified for the study of pollutant dispersion, due to hypothesis used in SYLVIA code, as in all zonal codes (homogenous concentration inside rooms, instantaneous propagation inside branches and rooms). (author)

Modelling hydrothermal venting in volcanic sedimentary basins: Impact on hydrocarbon maturation and paleoclimate

Science.gov (United States)

Iyer, Karthik; Schmid, Daniel W.; Planke, Sverre; Millett, John

2017-06-01

Vent structures are intimately associated with sill intrusions in sedimentary basins globally and are thought to have been formed contemporaneously due to overpressure generated by gas generation during thermogenic breakdown of kerogen or boiling of water. Methane and other gases generated during this process may have driven catastrophic climate change in the geological past. In this study, we present a 2D FEM/FVM model that accounts for 'explosive' vent formation by fracturing of the host rock based on a case study in the Harstad Basin, offshore Norway. Overpressure generated by gas release during kerogen breakdown in the sill thermal aureole causes fracture formation. Fluid focusing and overpressure migration towards the sill tips results in vent formation after only few tens of years. The size of the vent depends on the region of overpressure accessed by the sill tip. Overpressure migration occurs in self-propagating waves before dissipating at the surface. The amount of methane generated in the system depends on TOC content and also on the type of kerogen present in the host rock. Generated methane moves with the fluids and vents at the surface through a single, large vent structure at the main sill tip matching first-order observations. Violent degassing takes place within the first couple of hundred years and occurs in bursts corresponding to the timing of overpressure waves. The amount of methane vented through a single vent is only a fraction (between 5 and 16%) of the methane generated at depth. Upscaling to the Vøring and Møre Basins, which are a part of the North Atlantic Igneous Province, and using realistic host rock carbon content and kerogen values results in a smaller amount of methane vented than previously estimated for the PETM. Our study, therefore, suggests that the negative carbon isotope excursion (CIE) observed in the fossil record could not have been caused by intrusions within the Vøring and Møre Basins alone and that a contribution

A Large Tracking Detector In Vacuum Consisting Of Self-Supporting Straw Tubes

Science.gov (United States)

Wintz, P.

2004-02-01

A novel technique to stretch the anode wire simply by the gas over-pressure inside straw drift tubes reduces the necessary straw weight to an absolute minimum. Our detector will consist of more than 3000 straws filling up a cylindrical tracking volume of 1m diameter and 30cm length. The projected spatial resolution is 200μm. The detector with a total mass of less than 15kg will be operated in vacuum, but will have an added wall thickness of 3mm mylar, only. The detector design, production experience and first results will be discussed.

A Large Tracking Detector In Vacuum Consisting Of Self-Supporting Straw Tubes

International Nuclear Information System (INIS)

Wintz, P.

2004-01-01

A novel technique to stretch the anode wire simply by the gas over-pressure inside straw drift tubes reduces the necessary straw weight to an absolute minimum. Our detector will consist of more than 3000 straws filling up a cylindrical tracking volume of 1m diameter and 30cm length. The projected spatial resolution is 200μm. The detector with a total mass of less than 15kg will be operated in vacuum, but will have an added wall thickness of 3mm mylar, only. The detector design, production experience and first results will be discussed

International standards for radiation protection

International Nuclear Information System (INIS)

Ambrosi, P.

2011-01-01

International standards for radiation protection are issued by many bodies. These bodies differ to a large extent in their organisation, in the way the members are designated and in the way the international standards are authorised by the issuing body. Large differences also exist in the relevance of the international standards. One extreme is that the international standards are mandatory in the sense that no conflicting national standard may exist, the other extreme is that national and international standards conflict and there is no need to resolve that conflict. Between these extremes there are some standards or documents of relevance, which are not binding by any formal law or contract but are de facto binding due to the scientific reputation of the issuing body. This paper gives, for radiation protection, an overview of the main standards issuing bodies, the international standards or documents of relevance issued by them and the relevance of these documents. (authors)

Hydrothermal processes above the Yellowstone magma chamber: Large hydrothermal systems and large hydrothermal explosions

Science.gov (United States)

Morgan, L.A.; Shanks, W.C. Pat; Pierce, K.L.

2009-01-01

and vein-fi lling; and (5) areal dimensions of many large hydrothermal explosion craters in Yellowstone are similar to those of its active geyser basins and thermal areas. For Yellowstone, our knowledge of hydrothermal craters and ejecta is generally limited to after the Yellowstone Plateau emerged from beneath a late Pleistocene icecap that was roughly a kilometer thick. Large hydrothermal explosions may have occurred earlier as indicated by multiple episodes of cementation and brecciation commonly observed in hydrothermal ejecta clasts. Critical components for large, explosive hydrothermal systems include a watersaturated system at or near boiling temperatures and an interconnected system of well-developed joints and fractures along which hydrothermal fluids flow. Active deformation of the Yellowstone caldera, active faulting and moderate local seismicity, high heat flow, rapid changes in climate, and regional stresses are factors that have strong infl uences on the type of hydrothermal system developed. Ascending hydrothermal fluids flow along fractures that have developed in response to active caldera deformation and along edges of low-permeability rhyolitic lava flows. Alteration of the area affected, self-sealing leading to development of a caprock for the hydrothermal system, and dissolution of silica-rich rocks are additional factors that may constrain the distribution and development of hydrothermal fields. A partial lowpermeability layer that acts as a cap to the hydrothermal system may produce some over-pressurization, thought to be small in most systems. Any abrupt drop in pressure initiates steam fl ashing and is rapidly transmitted through interconnected fractures that result in a series of multiple large-scale explosions contributing to the excavation of a larger explosion crater. Similarities between the size and dimensions of large hydrothermal explosion craters and thermal fields in Yellowstone may indicate that catastrophic events which result in l

Implementation of a change management solution based on a product lifecycle management system for a large international project

International Nuclear Information System (INIS)

Luehr, Anneke

2011-08-01

This Thesis describes the implementation of a Change Management solution based on a Product Lifecycle Management System (PLM System) for a large international project. The objective of Change Management is to ensure a systematic line of action for approving and implementing changes in the project. The Deutsches Elektronen-Synchrotron DESY is one of the world's leading accelerator centres with locations in Hamburg and Zeuthen. Currently, DESY participates in the realization of the international research facility European X-Ray Free-Electron Laser (XFEL) at the Hamburg site. DESY was responsible for the planning of the XFEL. When the project entered the construction phase it was internationalized and now comprises project groups in 12 countries. Thus the requirements on Change Management have changed, as participants from several labs at many different locations are now involved. First the project scope is described and then a target process for the Change Management solution is developed by a requirement analysis. Afterwards the technical implementation of this process in DESY's PLM System is described and the Change Management solution is tested. The process is visualized using the Unified Modeling Language (UML). Finally a description is given of how to transfer the solution to the project

Intermittent large amplitude internal waves observed in Port Susan, Puget Sound

Science.gov (United States)

Harris, J. C.; Decker, L.

2017-07-01

A previously unreported internal tidal bore, which evolves into solitary internal wave packets, was observed in Port Susan, Puget Sound, and the timing, speed, and amplitude of the waves were measured by CTD and visual observation. Acoustic Doppler current profiler (ADCP) measurements were attempted, but unsuccessful. The waves appear to be generated with the ebb flow along the tidal flats of the Stillaguamish River, and the speed and width of the resulting waves can be predicted from second-order KdV theory. Their eventual dissipation may contribute significantly to surface mixing locally, particularly in comparison with the local dissipation due to the tides. Visually the waves appear in fair weather as a strong foam front, which is less visible the farther they propagate.

Arbitrarily large numbers of kink internal modes in inhomogeneous sine-Gordon equations

Energy Technology Data Exchange (ETDEWEB)

González, J.A., E-mail: jalbertgonz@yahoo.es [Department of Physics, Florida International University, Miami, FL 33199 (United States); Department of Natural Sciences, Miami Dade College, 627 SW 27th Ave., Miami, FL 33135 (United States); Bellorín, A., E-mail: alberto.bellorin@ucv.ve [Escuela de Física, Facultad de Ciencias, Universidad Central de Venezuela, Apartado Postal 47586, Caracas 1041-A (Venezuela, Bolivarian Republic of); García-Ñustes, M.A., E-mail: monica.garcia@pucv.cl [Instituto de Física, Pontificia Universidad Católica de Valparaíso, Casilla 4059 (Chile); Guerrero, L.E., E-mail: lguerre@usb.ve [Departamento de Física, Universidad Simón Bolívar, Apartado Postal 89000, Caracas 1080-A (Venezuela, Bolivarian Republic of); Jiménez, S., E-mail: s.jimenez@upm.es [Departamento de Matemática Aplicada a las TT.II., E.T.S.I. Telecomunicación, Universidad Politécnica de Madrid, 28040-Madrid (Spain); Vázquez, L., E-mail: lvazquez@fdi.ucm.es [Departamento de Matemática Aplicada, Facultad de Informática, Universidad Complutense de Madrid, 28040-Madrid (Spain)

2017-06-28

We prove analytically the existence of an infinite number of internal (shape) modes of sine-Gordon solitons in the presence of some inhomogeneous long-range forces, provided some conditions are satisfied. - Highlights: • We have found exact kink solutions to the perturbed sine-Gordon equation. • We have been able to study analytically the kink stability problem. • A kink equilibrated by an exponentially-localized perturbation has a finite number of oscillation modes. • A sufficiently broad equilibrating perturbation supports an infinite number of soliton internal modes.

Effects of mechanical layering on hydrofracture emplacement and fluid transport in reservoirs

Directory of Open Access Journals (Sweden)

Sonja Leonie Philipp

2013-12-01

Full Text Available Fractures generated by internal fluid pressure, for example, dykes, mineral veins, many joints and man-made hydraulic fractures, are referred to as hydrofractures. Together with shear fractures, they contribute significantly to the permeability of fluid reservoirs such as those of petroleum, geothermal water, and groundwater. Analytical and numerical models show that – in homogeneous host rocks – any significant overpressure in hydrofractures theoretically generates very high crack tip tensile stresses. Consequently, overpressured hydrofractures should propagate and help to form interconnected fracture systems that would then contribute to the permeability of fluid reservoirs. Field observations, however, show that in heterogeneous and anisotropic, e.g., layered, rocks many hydrofractures become arrested or offset at layer contacts and do not form vertically interconnected networks. The most important factors that contribute to hydrofracture arrest are discontinuities (including contacts, stiffness changes between layers, and stress barriers, where the local stress field is unfavourable to hydrofracture propagation. A necessary condition for a hydrofracture to propagate to the surface is that the stress field along its potential path is everywhere favourable to extension-fracture formation so that the probability of hydrofracture arrest is minimised. Mechanical layering and the resulting heterogeneous stress field largely control whether evolving hydrofractures become confined to single layers (strata¬bound frac¬tures or not (non-stratabound fractures and, there¬fore, if a vertically intercon¬nec¬ted fracture system forms. Non-stratabound hydrofractures may propagate through many layers and generate interconnected fracture systems. Such systems commonly reach the percolation threshold and largely control the overall permeability of the fluid reservoirs within which they develop.

Simulations of the design basis accident at conditions of power increase and the o transient of MSIV at overpressure conditions of the Laguna Verde Power Station; Simulaciones del accidente base de diseno a condiciones de aumento de potencia y del transitorio de cierre de MSIV a condiciones de sobrepresion de la Central Laguna Verde

Energy Technology Data Exchange (ETDEWEB)

Araiza M, E.; Nunez C, A. [Comision Nacional de Seguridad Nuclear y Salvaguardias, 03000 Mexico D.F. (Mexico)

2001-07-01

This document presents the analysis of the simulation of the loss of coolant accident at uprate power conditions, that is 2027 MWt (105% of the current rated power of 1931MWt). This power was reached allowing an increase in the turbine steam flow rate without changing the steam dome pressure value at its rated conditions (1020 psiaJ. There are also presented the results of the simulation of the main steam isolation va/ve transient at overpressure conditions 1065 psia and 1067 MWt), for Laguna Verde Nuclear Power Station. Both simulations were performed with the best estimate computer code TRA C BF1. The results obtained in the loss of coolant accident show that the emergency core coolant systems can recover the water level in the core before fuel temperature increases excessively, and that the peak pressure reached in the drywell is always below its design pressure. Therefore it is concluded that the integrity of the containment is not challenged during a loss of coolant accident at uprate power conditions.The analysis of the main steam isolation valve transients at overpressure conditions, and the analysis of the particular cases of the failure of one to six safety relief valves to open, show that the vessel peak pressures are below the design pressure and have no significant effect on vessel integrity. (Author)

PREFACE: PASREG 2003: International Workshop on Processing and Applications of Superconducting (RE)BCO Large Grain Materials

Science.gov (United States)

Murakami, Masato; Cardwell, David; Salama, Kamel; Krabbes, Gernot; Habisreuther, Tobias; Gawalek, Wolfgang

2005-02-01

Superconducting melt-textured bulk (RE)BCO large grain materials are one of the most promising materials for power applications of high temperature superconductivity at the liquid nitrogen temperature range. Industrial applications are expected in high-speed low-loss magnetic bearings for flywheel energy storage devices, high-dynamic high-torque electric reluctance motors, and MAGLEV transportation systems. The material has high magnetic field trapping capability and therefore a new class of high-field superconducting permanent magnets will soon appear. However, there is still the need to improve the magnetic and mechanical material properties, as well as to increase the single domain size. This special issue contains papers concerning these topics presented at the International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials. The workshop was held on the 30 June-2 July 2003 in Jena, Germany, and was organized by the Institut fuer Physikalische Hochtechnologie, Jena. It was the fourth in the series of PASREG workshops after Cambridge, UK (1997), Morioka, Japan (1999), and Seattle, USA (2001). Sixty two contributions were presented at the workshop, 38 oral presentations and 24 poster presentations. This special issue contains 42 papers. The editors are grateful for the support of many colleagues who reviewed the manuscripts to guarantee their high technical quality. The editors also wish to thank Doris Litzkendorf and Tobias Habisreuther from Institut fuer Physikalische Hochtechnologie, Jena, for their assistance with the organization and handling of the manuscripts. Many thanks to the workshop co-chairman Gernot Krabbes from Leibniz-Institut fuer Festkoerper und Werkstoffforschung, Dresden, for hosting the workshop participants in Dresden. Finally, all attendees wish to acknowledge the efforts of Wolfgang Gawalek, Tobias Habisreuther, Doris Litzkendorf and the Team of Department Magnetics from the Institut fuer

Close-in characteristics of LH2/LOX reactions

Science.gov (United States)

Riehl, W. A.; Ullian, L. J.

1985-01-01

In deriving shock overpressures from space vehicles employing LH2 and LOX, separate methods of analyses and prediction are recommended, as a function of the distance. Three methods of treatment are recommended. For the Far Field - where the expected shock overpressure is less than 40 psi (lambda = 5) - use the classical PYRO approach to determine TNT yield, and employ classical ordnance (Kingery) curve to obtain the overall value. For the Close-In Range, a suggested limit is 3D, or a zone from a distance of three times the tank diameter to the tank wall. Rather than estimate a specific distance from the center of explosion to the target, it is only necessary to estimate whether this could be within one, two, or three diameters away from the wall; i.e., in the 1, 2, or 3D zone. Then assess whether mixing mode is by the PYRO CBGS (spill) mode or CBM (internal mixing) mode. From the zone and mixing mode, the probability of attaining various shock overpressures is determined from the plots provided herein. For the transition zone, between 40 psi and the 3D distance, it is tentatively recommended that both of the preceding methods be used, and to be conservative, the higher resulting value be used.

The new large-scale international facility for antiproton and ion research in Europe, FAIR

International Nuclear Information System (INIS)

Rosner, Guenther

2012-01-01

Full text: FAIR is currently the largest project in nuclear and particle physics worldwide, with investment costs of 1.6B euro in its first phase. It has been founded by Finland, France, Germany, India, Poland, Romania, Russia, Slovenia and Sweden in Oct. 2010. The facility will provide the international scientific community with a unique and technically innovative particle accelerator system to perform cutting-edge research in the sciences concerned with the basic structure of matter in: nuclear and particle physics, atomic and anti-matter physics, high density plasma physics, and applications in condensed matter physics, biology and the bio-medical sciences. The work horse of FAIR will be a 1.1 km circumference double ring of rapidly cycling 100 and 300 Tm synchrotrons, which will be used to produce high intensity secondary beams of anti-protons and very short-lived radioactive ions. A subsequent suite of cooler and storage rings will deliver anti-proton and heavy-ion beams of unprecedented quality regarding intensity and resolution. Large experimental facilities are presently being prototyped by the APPA, CBM, NuSTAR and PANDA Collaborations to be used by a global community of more than 3000 scientists from 2018. (author)

Innovation-driven efficient development of the Longwangmiao Fm large-scale sulfur gas reservoir in Moxi block, Sichuan Basin

Directory of Open Access Journals (Sweden)

Xinhua Ma

2016-03-01

Full Text Available The Lower Cambrian Longwangmiao Fm gas reservoir in Moxi block of the Anyue Gas field, Sichuan Basin, is the largest single-sandbody integrated carbonate gas reservoir proved so far in China. Notwithstanding this reservoir's advantages like large-scale reserves and high single-well productivity, there are multiple complicated factors restricting its efficient development, such as a median content of hydrogen sulfide, low porosity and strong heterogeneity of fracture–cave formation, various modes of gas–water occurrences, and close relation between overpressure and stress sensitivity. Up till now, since only a few Cambrian large-scale carbonate gas reservoirs have ever been developed in the world, there still exists some blind spots especially about its exploration and production rules. Besides, as for large-scale sulfur gas reservoirs, the exploration and construction is costly, and production test in the early evaluation stage is severely limited, all of which will bring about great challenges in productivity construction and high potential risks. In this regard, combining with Chinese strategic demand of strengthening clean energy supply security, the PetroChina Southwest Oil & Gas Field Company has carried out researches and field tests for the purpose of providing high-production wells, optimizing development design, rapidly constructing high-quality productivity and upgrading HSE security in the Longwangmiao Fm gas reservoir in Moxi block. Through the innovations of technology and management mode within 3 years, this gas reservoir has been built into a modern large-scale gas field with high quality, high efficiency and high benefit, and its annual capacity is now up to over 100 × 108 m3, with a desirable production capacity and development indexes gained as originally anticipated. It has become a new model of large-scale gas reservoirs with efficient development, providing a reference for other types of gas reservoirs in China.

LHCb in the International Particle Physics Masterclasses

CERN Document Server

Couturier, Ben

2016-01-01

The Large Hadron Collider Beauty (LHCb) Experiment joined the International Particle Physics Masterclass programme in 2013. The experiment proposed the measurement of the D0 meson lifetime, using real data gathered at the Large Hadron Collider in 2012. We describe the exercise as well as the lessons learned during this first participation in the International Masterclass programme.

Comprehensive Evaluation of Large Infrastructure Project Plan with ANP

Institute of Scientific and Technical Information of China (English)

HAN Chuan-feng; CHEN Jian-ye

2005-01-01

Analytic Network Process(ANP) was used in comprehensive evaluation of large infrastructure project plan. A model including social economy, ecological environment, and resources was established with ANP method. The evaluation pattern of hierarchy structure and comprehensive evaluation method for quantity and quality of large infrastructure project were put forward, which provides an effective way to evaluate the large infrastructure project plan. Quantitative analysis indicated that the internal dependence relation of hierarchy structure has influence on ranking results of plan. It is suggested that considering the internal relation can helps managers make effective decisions.

Falsire: CSNI project for fracture analyses of large-scale international reference experiments (Phase 1). Comparison report

International Nuclear Information System (INIS)

1994-01-01

A summary of the recently completed Phase I of the Project for Fracture Analysis of Large-Scale International Reference Experiments (Project FALSIRE) is presented. Project FALSIRE was created by the Fracture Assessment Group (FAG) of Principal Working Group No. 3 (PWG/3) of the OECD/NEA Committee on the Safety of Nuclear Installations (CSNI), formed to evaluate fracture prediction capabilities currently used in safety assessments of nuclear vessel components. The aim of the Project FALSIRE was to assess various fracture methodologies through interpretive analyses of selected large-scale fracture experiments. The six experiments used in Project FALSIRE (performed in the Federal Republic of Germany, Japan, the United Kingdom, and the U.S.A.) were designed to examine various aspects of crack growth in reactor pressure vessel (RPV) steels under pressurized-thermal-shock (PTS) loading conditions. The analysis techniques employed by the participants included engineering and finite-element methods, which were combined with Jr fracture methodology and the French local approach. For each experiment, analysis results provided estimates of variables such as crack growth, crack-mouth-opening displacement, temperature, stress, strain, and applied J and K values. A comparative assessment and discussion of the analysis results are presented; also, the current status of the entire results data base is summarized. Some conclusions concerning predictive capabilities of selected ductile fracture methodologies, as applied to RPVs subjected to PTS loading, are given, and recommendations for future development of fracture methodologies are made

Transparent Inflatable Column Film Dome for Nuclear Stations, Stadiums, and Cities

Directory of Open Access Journals (Sweden)

Alexander Bolonkin

2011-01-01

Full Text Available In a series of previous articles, one of the authors published designs of the AB Dome which can cover a city, important large installations or subregions by a transparent thin film supported by a small additional air overpressure. The AB Dome keeps the outside atmospheric conditions from the interior protecting a city from chemical, bacterial, and radioactive weapons (wastes. The design in this article differs from previous one as this design employs an inflatable columns which does not need an additional pressure (overpressure inside the dome and is cheaper in construction (no powered air pumping station and in operation (no special entrance airlock and permanent pumping expense. When dome is supported by columns, no overpressure is required inside the dome which is important when the dome covers a damaged nuclear reactor. The nuclear reactor may produce radioactive gases and dust, and, as inflatable domes are not typically hermetically sealed, the increased pressure inside the dome can leak out gas and dust into the atmosphere. The suggested design does not have this drawback. Positive pressure gradients expel dust particles—neutral pressure gradients will not. (Negative pressure gradients may even be possible in certain configurations.

26 CFR 1.6655-4 - Large corporations.

Science.gov (United States)

2010-04-01

... Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional Amounts, and Assessable Penalties § 1.6655-4 Large... not to be taken into account and the taxable income of a corporation for any taxable year during the...

Ocular Adnexal Diffuse Large B-cell LymphomaA Multicenter International Study

DEFF Research Database (Denmark)

Munch-Petersen, Helga D; Rasmussen, Peter K; Coupland, Sarah E

2015-01-01

: This retrospective international cooperative study involved 6 eye cancer centers. During 30 years, 106 patients with OA-DLBCL were identified, and 6 were excluded from the study. The median follow-up period was 52 months. MAIN OUTCOMES AND MEASURES: Overall survival, disease-specific survival (DSS), and progression...

Potential fire or explosion risks in reprocessing plants

International Nuclear Information System (INIS)

Lefort, G.

1983-05-01

Installation for reprocessing are large chemical plants handling large quantities of inflammable solvents and products allowing large risk of fire. Further, the chemical process involves the use of oxidizer and reducer agents which can have a very strong chemical activity and by certain circumstances create overpressures or large explosions. This paper shows the principal radioactive consequences we can retain in safety analyses. As an example the combustion phenomenon involved in a solid waste storage silo with irradiated uranium traces is described [fr

International Student Adaptation to a U.S. College: A Mixed Methods Exploration of the Impact of a Specialized First-Year Course at a Large Midwestern Institution

Science.gov (United States)

Kovtun, Olena

2011-01-01

This mixed methods study assessed a first-year course for international students, entitled the U.S. Education and Culture, at a large Midwestern public institution. The quantitative results indicated that participation in the course improved students' academic skills, psychosocial development, understanding of social diversity in the U.S., use of…

The Experiences of American International Students in a Large Irish University

Science.gov (United States)

O'Reilly, Aileen; Hickey, Tina; Ryan, Dermot

2015-01-01

Growing numbers of American students are travelling overseas to study abroad and enroll in full degree programs. Despite this trend, relatively little is known about the experiences of United States (U.S.) students abroad. The aim of this research was to examine the experiences of American international students in Ireland. Findings suggest that…

Surplus yeast tank failing catastrophically

DEFF Research Database (Denmark)

Hedlund, Frank Huess

2016-01-01

GOOD REASON FOR CAUTION I A large surplus yeast tank shot into the air leaving the floor plate and the contents behind. Although not designed for overpressure, the tank was kept at “very slight overpressure” to suppress nuisance foaming. The brewery was unaware of the hazards of compressed air...

Large-eddy simulations of turbulent flows in internal combustion engines

Science.gov (United States)

Banaeizadeh, Araz

The two-phase compressible scalar filtered mass density function (FMDF) model is further developed and employed for large-eddy simulations (LES) of turbulent spray combustion in internal combustion (IC) engines. In this model, the filtered compressible Navier-Stokes equations are solved in a generalized curvilinear coordinate system with high-order, multi-block, compact differencing schemes for the turbulent velocity and pressure. However, turbulent mixing and combustion are computed with a new two-phase compressible scalar FMDF model. The spray and droplet dispersion/evaporation are modeled with a Lagrangian method. A new Lagrangian-Eulerian-Lagrangian computational method is employed for solving the flow, spray and scalar equation. The pressure effect in the energy equation, as needed in compressible flows, is included in the FMDF formulation. The performance of the new compressible LES/FMDF model is assessed by simulating the flow field and scalar mixing in a rapid compression machine (RCM), in a shock tube and in a supersonic co-axial jet. Consistency of temperatures predicted by the Eulerian finite-difference (FD) and Lagrangian Monte Carlo (MC) parts of the LES/FMDF model are established by including the pressure on the FMDF. It is shown that the LES/FMDF model is able to correctly capture the scalar mixing in both compressible subsonic and supersonic flows. Using the new two-phase LES/FMDF model, fluid dynamics, heat transfer, spray and combustion in the RCM with flat and crevice piston are studied. It is shown that the temperature distribution in the RCM with crevice piston is more uniform than the RCM with flat piston. The fuel spray characteristics and the spray parameters affecting the fuel mixing inside the RCM in reacting and non-reacting flows are also studied. The predicted liquid penetration and flame lift-off lengths for respectively non-reacting and reacting sprays are found to compare well with the available experimental data. Temperatures and

Numerical simulation of an equipment hatch for a steel containment vessel to loading beyond the design basis

International Nuclear Information System (INIS)

Kulak, R.F.; Hsieh, B.J.; Ash, J.E.; Kennedy, J.M.; McLennan, G.A.

1985-01-01

A preliminary analysis of the sealing deformations of a large equipment hatch with a pressure-seated gasket due to overpressurization was performed. An axisymmetric finite element analysis of the penetration sleeve revealed that its surface can undergo large rotations; values for sealing surface rotation of 7 0 were computed. Estimates for the order of magnitude of leakage due to the sealing surface rotation were made. 10 refs., 7 figs., 1 tab

Clinical and histological evaluation of large macular hole surgery using the inverted internal limiting membrane flap technique

Directory of Open Access Journals (Sweden)

Kase S

2016-12-01

Full Text Available Satoru Kase, Wataru Saito, Shohei Mori, Michiyuki Saito, Ryo Ando, Zhenyu Dong, Tomohiro Suzuki, Kousuke Noda, Susumu Ishida Department of Ophthalmology, Hokkaido University Graduate School of Medicine, Sapporo, Japan Purpose: The aims of this study were to analyze optical coherence tomography (OCT imaging of large macular holes (MHs treated with inverted internal limiting membrane (ILM flap technique and to perform a histological examination of an ILM-like membrane tissue obtained during vitrectomy.Patients and methods: This is a retrospective observational case study. Nine patients, comprising of five males and four females, showing large and myopic MHs, underwent pars plana vitrectomy (PPV with inverted ILM flap technique assisted by brilliant blue G (BBG staining. Ophthalmological findings including visual acuity and OCT were investigated based on medical records. Formalin-fixed paraffin-embedded tissue section of an ILM-like membrane was submitted for immunohistochemistry with glial fibrillary acidic protein (GFAP.Results: ILM was clearly stained with BBG in eight patients, whereas the ILM in one case revealed no staining with BBG during PPV. Visual acuities improved to >0.2 LogMAR in six patients. The complete closure of MH following PPV with inverted ILM technique was eventually achieved in all patients determined by OCT imaging (100%. Only one patient showed recovery of ellipsoid zone and interdigitation zone following the surgery. Elongation of outer nuclear layer was noted in three eyes. The ILM-like membrane not stained with BBG histologically revealed an amorphous structure admixed with GFAP-positive mononuclear cell infiltration.Conclusion: PPV with inverted ILM flap technique achieved 100% closure rates with favorable configuration at an initial surgery in large MHs. Our histopathological data also suggest that even BBG staining-negative membrane may be a useful material for autologous transplantation to the hole. Keywords

Physics with large extra dimensions

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics; Volume 62; Issue 2 ... The recent understanding of string theory opens the possibility that the string scale can be as ... by the existence of large internal dimensions, in the sub-millimeter region.

Triple Z0-Boson Production in a Large Extra Dimensions Model at the International Linear Collider

International Nuclear Information System (INIS)

Jiang Ruo-Cheng; Li Xiao-Zhou; Ma Wen-Gan; Guo Lei; Zhang Ren-You

2012-01-01

We investigate the effects induced by the interactions of the Kaluza—Klein graviton with the standard model (SM) particles on the triple Z 0 -boson production process at the International Linear Collider in the framework of the large extra dimension (LED) model. We present the dependence of the integrated cross sections on the electron-positron colliding energy √s, and various kinematic distributions of final Z 0 bosons and their subsequential decay products in both the SM and the LED model. We also provide the relationship between the integrated cross section and the fundamental scale MS by taking the number of the extra dimensions (d) as 3, 4, 5, and 6, respectively. The numerical results show that the LED effect can induce an observable relative discrepancy for the integrated cross section (δ LED ). We find that the relative discrepancy of the LED effect can even reach a few dozen percent in the high transverse momentum area or the central rapidity region of the final Z 0 -bosons and muons

FALSIRE Phase II. CSNI project for Fracture Analyses of Large-Scale International Reference Experiments (Phase II). Comparison report

International Nuclear Information System (INIS)

Sievers, J.; Schulz, H.; Bass, R.; Pugh, C.; Keeney, J.

1996-11-01

A summary of Phase II of the Project for Fracture Analysis of Large-Scale International Reference Experiments (FALSIRE) is presented. A FALSIRE II Workshop focused on analyses of reference fracture experiments. More than 30 participants representing 22 organizations from 12 countries took part in the workshop. Final results for 45 analyses of the reference experiments were received from the participating analysts. For each experiment, analysis results provided estimates of variables that include temperature, crack-mouth-opening displacement, stress, strain, and applied K and J values. The data were sent electronically to the Organizing Committee, who assembled the results into a comparative data base using a special-purpose computer program. A comparative assessment and discussion of the analysis results are presented in the report. Generally, structural responses of the test specimens were predicted with tolerable scatter bands. (orig./DG)

Internal capital markets: The bright side of corporate politics

NARCIS (Netherlands)

Cremers, M.; Huang, R.; Sautner, Z.

2008-01-01

This study looks inside the internal capital market of a large retail-banking group to study how internal corporate politics affect internal capital allocation. Our data is from the firm's managerial accounting system and covers all cash flows, internal capital transfers, and investments at the

A large superconducting accelerator project. International linear collider (ILC). Introduction

International Nuclear Information System (INIS)

Yamamoto, Akira

2013-01-01

The international linear collider (ILC) is proposed as the next-energy-frontier particle accelerator anticipated to be realized through global cooperation. The ILC accelerator is composed of a pair of electron and positron linear accelerators to realize head-on collision with a center-of-mass energy of 500 (250+250) GeV. It is based on superconducting radio-frequency (SCRF) technology, and the R and D and technical design have progressed in the technical design phase since 2007, and the technical design report (TDR) reached completion in 2012. This report reviews the ILC general design and technology. (author)

International taxation and multinational firm location decisions

OpenAIRE

Barrios Cobos, Salvador; Huizinga, Harry; Laeven, Luc; Nicodème, Gaëtan J.A.

2008-01-01

Using a large international firm-level data set, we estimate separate effects of host and parent country taxation on the location decisions of multinational firms. Both types of taxation are estimated to have a negative impact on the location of new foreign subsidiaries. In fact, the impact of parent country taxation is estimated to be relatively large, possibly reflecting its international discriminatory nature. For the cross-section of multinational firms, we find that parent firms tend to ...

Guidelines for dynamic international programs

International Nuclear Information System (INIS)

Gold, M.A.

1993-01-01

Matters of global concern-deforestation, global warming, biodiversity loss, sustainable development, fuelwood crises, watershed destruction, and large-scale flooding-frequently involve forests and natural resources. In the future, university students will enter a global setting that more than ever depends on a strong knowledge of international issues. USA land-grant universities are attempting to prepare students for this challenge by improving their international programs including forestry. To improve university programs, several factors will need to be addressed and are discussed, with examples, in this article: commitment of the faculty; program specialization; geographic specialization; reward systems for international contributions; international collaboration; recycled dollars within the university; active teaching programs; research; extention and outreach; language training; international faculty; travel grants; twinning relationships with sister institutions; selective in pursuit of international development assistance; and study centers. 6 refs

77 FR 52758 - Large Power Transformers From Korea

Science.gov (United States)

2012-08-30

... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1189 (Final)] Large Power Transformers... materially injured, by reason of imports from Korea of large power transformers, provided for in subheadings... Commission and Commerce by ABB Inc., Cary, NC; Delta Star Inc., Lynchburg, VA; and Pennsylvania Transformer...

International user studies

DEFF Research Database (Denmark)

Nielsen, Lene; Madsen, Sabine; Jensen, Iben

In this report, we present the results of a research project about international user studies. The project has been carried out by researchers from the Center for Persona Research and –Application, The IT University in Copenhagen and the Department of Learning and Philosophy, Aalborg University...... in Sydhavnen, and it is funded by InfinIT. Based on a qualitative interview study with 15 user researchers from 11 different companies, we have investigated how companies collect and present data about users on international markets. Key findings are: Companies do not collect data about end users in all...... the countries/regions they operate in. Instead, they focus on a few strategic markets. International user studies tend to be large-scale studies that involve the effort of many both internal and external/local human resources. The studies typically cover 2-4 countries/regions and many end users in each country...

SURGICAL OUTCOMES AFTER INVERTED INTERNAL LIMITING MEMBRANE FLAP VERSUS CONVENTIONAL PEELING FOR VERY LARGE MACULAR HOLES.

Science.gov (United States)

Narayanan, Raja; Singh, Sumit R; Taylor, Stanford; Berrocal, Maria H; Chhablani, Jay; Tyagi, Mudit; Ohno-Matsui, Kyoko; Pappuru, Rajeev R; Apte, Rajendra S

2018-04-23

To evaluate the anatomical and visual outcomes of inverted flap technique of peeling of internal limiting membrane (ILM) versus standard peeling of ILM for macular holes of basal diameter more than 800 μm. Patients with very large idiopathic macular holes more than 800 μm in basal diameter (ranging from 243 μm to 840 μm in minimum diameter) were retrospectively included in the study. In Group A, 18 eyes of 18 patients underwent ILM peeling using the inverted flap technique. In Group B, 18 eyes of 18 patients underwent conventional ILM peeling. The primary endpoint was the rate of hole closure at 6 months after surgery. The secondary outcome measure was the change in best-corrected visual acuity at 6 months after surgery. There were no significant differences in ocular characteristics of the study groups at baseline except for the age distribution. Mean macular hole diameter was 1,162.8 ± 206.0 μm and 1,229.6 ± 228.1 μm in Group A and Group B, respectively. The hole closure rate was 88.9% (16/18) in Group A and 77.8% (14/18) in Group B (P = 0.66). The mean gain in best-corrected visual acuity was higher in Group A than in Group B (P = 0.12) at 6 months, but this was not statistically significant. There were no severe ocular adverse events in either group. In this multicenter series, inverted ILM flap technique did not lead to significantly higher anatomical closure rates than conventional ILM peeling in large macular holes more than 800 μm in diameter.

International oil opportunities

International Nuclear Information System (INIS)

Hares, T.N.D.; Mann, D.W.

1995-01-01

Some of the key issues to be addressed when selecting international opportunities, were discussed. The ideal opportunity should have the following characteristics: (1) large, low risk (2) high percentage of rent available to the investor, (3) low cost and low technical requirements, (4) low country risk, (5) low competition, (6) easy to access, and (7) favorable environment in which to work. Entering an international opportunity can be achieved by competitive bidding, direct negotiation, partnership, corporate and/or asset acquisition, and long-term relationships. Key success factors were identified as (1) applying technical financial and commercial skills in the international environment, (2) speedy response, (3) excellent relationships in the foreign country, (4) understanding the local culture, and (5) keeping a good track record. 6 figs

FY99 Status Report on the HSV

International Nuclear Information System (INIS)

Shanahan, K.L.

1999-01-01

'The HSV in storage in MTF has been monitored during FY99, and its overpressure has been sampled and analyzed. The HSV''s internal pressure continues to rise slowly, and the overpressure still analyzes as 100 percent 3He. The titanium tritide sample that was to be monitored annually and which had developed a leak last year has been repaired and isotherms measured. Unfortunately the sample was showing significant unexpected 3He release, so the isotherm data is corrupted by unknown levels of 3He. This release has disqualified this sample for future use, as it is now seriously divergent from the HSV material. A different sample must be selected for subsequent studies.The unexpected 3He releases of the Ti-3 sample and the possible release in other Ti samples have raised a serious issue. It should be determined why this release is occurring, so that an unexpected release of 3He during HSV unloading can be assessed as unlikely.'

FY99 Status Report on the HSV

Energy Technology Data Exchange (ETDEWEB)

Shanahan, K.L.

1999-10-15

'The HSV in storage in MTF has been monitored during FY99, and its overpressure has been sampled and analyzed. The HSV''s internal pressure continues to rise slowly, and the overpressure still analyzes as 100 percent 3He. The titanium tritide sample that was to be monitored annually and which had developed a leak last year has been repaired and isotherms measured. Unfortunately the sample was showing significant unexpected 3He release, so the isotherm data is corrupted by unknown levels of 3He. This release has disqualified this sample for future use, as it is now seriously divergent from the HSV material. A different sample must be selected for subsequent studies.The unexpected 3He releases of the Ti-3 sample and the possible release in other Ti samples have raised a serious issue. It should be determined why this release is occurring, so that an unexpected release of 3He during HSV unloading can be assessed as unlikely.'

Understanding Social Learning Relations of International Students in a Large Classroom Using Social Network Analysis

Science.gov (United States)

Rienties, Bart; Héliot, YingFei; Jindal-Snape, Divya

2013-01-01

A common assumption in higher education is that international students find it difficult to develop learning and friendship relations with host students. When students are placed in a student-centred environment, international students from different cultural backgrounds are "forced" to work together with other students, which allows…

On the propagation of the pressure pulse due to an unconfined gas cloud explosion

International Nuclear Information System (INIS)

Essers, J.A.

1985-01-01

A critical analysis of flow models used in computer codes for the simulation of the propagation in air of a pressure pulse due to a gas cloud explosion is presented. In particular, weaknesses of simple linear acoustic model are pointed out, and a more reliable non-linear isentropic model is proposed. A simple one-dimensional theory is used to evaluate as a function of the relative overpressure the speed of an incident normal shock-wave, as well as the strength and speed of the wave after reflection on a simplified rigid obstacle. Results obtained with the different models are compared to those obtained from the full Euler equations. A theoretical analysis of pulse deformation during its propagation is presented, and the ability of each model to correctly simulate that purely non-linear phenomenon is discussed. In particular, the formation of a sharp pressure pulse (shock-up phenomenon) is analyzed in detail. From the analysis, the accuracy of the linear acoustic model for the evaluation of strength and speed of incident and reflected waves is found to be quite poor except for very weak overpressures. Additionally, such a model is completely unable to simulate pulse deformations. As a result, it should be expected to lead to important errors in the simulation of pulse interaction with non-rigid obstacles, even at very weak overpressures. As opposed to that very simple model, the proposed non-linear isentropic model is found to lead to an excellent accuracy in the prediction of all wave characteristics mentioned above and in the simulation of pulse deformation if overpressure is not too large. (author)

Measuring Intracranial Pressure and Correlation with Severity of Blast Traumatic Brain Injury

Science.gov (United States)

2013-01-01

overpressure positive phase was not affected by the anomalous effect of the rarefaction wave coming from the open-end of the tube. Calibrations were...experience the overpressure. The representative curves are seen below from the 1537 mm sensor, which represents the exposed absolute overpressure on the...the cross-section of the shock tube is constant, the shockwave moves at a constant speed unattenuated down the tube until the reflected rarefaction

The precautionary principle in international environmental law and international jurisprudence

Directory of Open Access Journals (Sweden)

Tubić Bojan

2014-01-01

Full Text Available This paper analysis international regulation of the precautionary principle as one of environmental principles. This principle envisages that when there are threats of serious and irreparable harm, as a consequence of certain economic activity, the lack of scientific evidence and full certainty cannot be used as a reason for postponing efficient measures for preventing environmental harm. From economic point of view, the application of precautionary principle is problematic, because it creates larger responsibility for those who create possible risks, comparing to the previous period. The precautionary principle can be found in numerous international treaties in this field, which regulate it in a very similar manner. There is no consensus in doctrine whether this principle has reached the level of international customary law, because it was interpreted differently and it was not accepted by large number of countries in their national legislations. It represents a developing concept which is consisted of changing positions on adequate roles of science, economy, politics and law in the field of environmental protection. This principle has been discussed in several cases before International Court of Justice and International Tribunal for the Law of the Sea.

Mineral vein dynamics modelling (FRACS II)

International Nuclear Information System (INIS)

Urai, J.; Virgo, S.; Arndt, M.

2016-08-01

The Mineral Vein Dynamics Modeling group ''FRACS'' started out as a team of 7 research groups in its first phase and continued with a team of 5 research groups at the Universities of Aachen, Tuebingen, Karlsruhe, Mainz and Glasgow during its second phase ''FRACS 11''. The aim of the group was to develop an advanced understanding of the interplay between fracturing, fluid flow and fracture healing with a special emphasis on the comparison of field data and numerical models. Field areas comprised the Oman mountains in Oman (which where already studied in detail in the first phase), a siliciclastic sequence in the Internal Ligurian Units in Italy (closed to Sestri Levante) and cores of Zechstein carbonates from a Lean Gas reservoir in Northern Germany. Numerical models of fracturing, sealing and interaction with fluid that were developed in phase I where expanded in phase 11. They were used to model small scale fracture healing by crystal growth and the resulting influence on flow, medium scale fracture healing and its influence on successive fracturing and healing, as well as large scale dynamic fluid flow through opening and closing fractures and channels as a function of fluid overpressure. The numerical models were compared with structures in the field and we were able to identify first proxies for mechanical vein-hostrock properties and fluid overpressures versus tectonic stresses. Finally we propose a new classification of stylolites based on numerical models and observations in the Zechstein cores and continued to develop a new stress inversion tool to use stylolites to estimate depth of their formation.

Radiation Therapy for Primary Cutaneous Anaplastic Large Cell Lymphoma: An International Lymphoma Radiation Oncology Group Multi-institutional Experience

Energy Technology Data Exchange (ETDEWEB)

Million, Lynn, E-mail: lmillion@stanford.edu [Stanford Cancer Institute, Stanford, California (United States); Yi, Esther J.; Wu, Frank; Von Eyben, Rie [Stanford Cancer Institute, Stanford, California (United States); Campbell, Belinda A. [Department of Radiation Oncology and Cancer Imaging, Peter MacCallum Cancer Centre, East Melbourne (Australia); Dabaja, Bouthaina [The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Tsang, Richard W. [Department of Radiation Oncology, Princess Margaret Cancer Centre, Toronto, Ontario (Canada); Ng, Andrea [Department of Radiation Oncology, Dana-Farber Cancer Institute, Boston, Massachusetts (United States); Wilson, Lynn D. [Department of Therapeutic Radiology/Radiation Oncology, Yale School of Medicine, Yale Cancer Center, New Haven, Connecticut (United States); Ricardi, Umberto [Department of Oncology, University of Turin, Turin (Italy); Kirova, Youlia [Institut Curie, Paris (France); Hoppe, Richard T. [Stanford Cancer Institute, Stanford, California (United States)

2016-08-01

Purpose: To collect response rates of primary cutaneous anaplastic large cell lymphoma, a rare cutaneous T-cell lymphoma, to radiation therapy (RT), and to determine potential prognostic factors predictive of outcome. Methods and Materials: The study was a retrospective analysis of patients with primary cutaneous anaplastic large cell lymphoma who received RT as primary therapy or after surgical excision. Data collected include initial stage of disease, RT modality (electron/photon), total dose, fractionation, response to treatment, and local recurrence. Radiation therapy was delivered at 8 participating International Lymphoma Radiation Oncology Group institutions worldwide. Results: Fifty-six patients met the eligibility criteria, and 63 tumors were treated: head and neck (27%), trunk (14%), upper extremities (27%), and lower extremities (32%). Median tumor size was 2.25 cm (range, 0.6-12 cm). T classification included T1, 40 patients (71%); T2, 12 patients (21%); and T3, 4 patients (7%). The median radiation dose was 35 Gy (range, 6-45 Gy). Complete clinical response (CCR) was achieved in 60 of 63 tumors (95%) and partial response in 3 tumors (5%). After CCR, 1 tumor recurred locally (1.7%) after 36 Gy and 7 months after RT. This was the only patient to die of disease. Conclusions: Primary cutaneous anaplastic large cell lymphoma is a rare, indolent cutaneous lymphoma with a low death rate. This analysis, which was restricted to patients selected for treatment with radiation, indicates that achieving CCR was independent of radiation dose. Because there were too few failures (<2%) for statistical analysis on dose response, 30 Gy seems to be adequate for local control, and even lower doses may suffice.

Deformation Analyses and Lithologic Characterization in Overpressured Basins Based on Logging While Drilling and Wireline Results from the Gulf of Mexico

Science.gov (United States)

Iturrino, G. J.; Pirmez, C.; Moore, J. C.; Reichow, M. K.; Dugan, B. E.; Sawyer, D. E.; Flemings, P. B.; Shipboard Scientific Party, I.

2005-12-01

IODP Expedition 308 drilled transects along the Brazos-Trinity IV and Ursa Basins in the western and eastern Gulf of Mexico, respectively, for examining how sedimentation, overpressure, fluid flow, and deformation are coupled in passive margin settings. A total of eight holes were logged using either logging while drilling (LWD) or wireline techniques to evaluate the controls on slope stability, understand the timing of sedimentation and slumping, establish the petrophysical properties of shallow sediments, and provide a better understanding of turbidite systems. Overall, the log responses vary for the different lithostratigraphic units and associated regional seismic reflectors. The data acquired also make bed-to-bed correlation between sites possible, which is valuable for the study of sandy turbidites and studies of regional deformation. The thick sedimentary successions drilled at these basins show records of the evolution of channel-levee systems composed of low relief channels that were incapable of confining the turbidity currents causing an overspill of sand and silt. In addition, mass transport deposits at shallow depths, and transitions between interbedded silt, sand, and mud units are common features identified in many of the downhole logging data. In the Ursa Basin sediments, resistivity-at-the-bit images show significant deformation of the overlying hemipelagic drape and distal turbidites that were drilled in these areas. Numerous dipping beds throughout these intervals with dips ranging from 5 to 55 degrees confirm core observations. Steeply deformed beds, with dips as high as 65 degrees, and folded and faulted beds suggest down slope remobilization as mass-transport deposits. Resistivity images also show evidence of these mass-transport deposits where steep dips and folds suggest the presence of overturned beds within a series of cyclic intervals that we interpret as a succession of sand-silt-mud lamina. Preliminary structural analyses suggest that

Considerations on reduction of risk from anticipated transients without scram in a regulatory perspective

International Nuclear Information System (INIS)

Ahn, S. H.; Oh, D. Y.; Kim, I. K.; Lee, S. H.

2002-01-01

ATWS (Anticipated Transients Without Scram) are anticipated operational occurrences accompanied by the failure of the reactor trip portion of the reactor trip system. ATWS accidents are an cause of concern because under certain postulated conditions they could lead to significant core damage including core melt and to the large release of radioactivity to the environment. In this study, considerations on reduction of risk from ATWS were discussed with examination of the technical background of 10CFR 50.62. Considering the recent trends of the extended core cycle and the power uprating, it is recognized that the moderator temperature coefficient can become less negative than to suppress the RCS overpressure followed by ATWS. Because the negative reactivity feedback is one inherent level of multiple defenses, the effect against the RCS overpressure needs to be assessed in detail

An empirical not on job turnover and internal mobility of workers

NARCIS (Netherlands)

Hassink, W.H.J.

1996-01-01

The rate of job turnover in which the internal mobility of workers is involved is higher in large firms than in small firms. Large firms are able to reduce turnover costs by using their ability to attain a higher internal mobility rate.

Investigations with respect to pressure build-up in 200 l drums with supercompacted low level waste (LLW)

International Nuclear Information System (INIS)

Kroth, K.; Lammertz, H.

1988-04-01

In the drum storage facilities of various nuclear power stations, ballooning effects have recently been observed on a limited number of 200 l drums filled with hypercompacted mixed LLW. The ballooning of the drums lid and bottom is due to internal overpressure caused by gas formation in the waste. The internal drum pressures and the composition of the drum gases were measured on a considerable number of 200 l drums. Hydrogen, formed by chemical reactions between the waste components, was identified as the pressure generating gas. The reasons for the hydrogen formation were investigated on both real and simulated wastes. (orig.) [de

The inner containment of an EPR trademark pressurized water reactor

Energy Technology Data Exchange (ETDEWEB)

Ostermann, Dirk; Krumb, Christian; Wienand, Burkhard [AREVA GmbH, Offenbach (Germany)

2014-08-15

On February 12, 2014 the containment pressure and subsequent leak tightness tests on the containment of the Finnish Olkiluoto 3 EPR trademark reactor building were completed successfully. The containment of an EPR trademark pressurized water reactor consists of an outer containment to protect the reactor building against external hazards (such as airplane crash) and of an inner containment that is subjected to internal overpressure and high temperature in case of internal accidents. The current paper gives an overview of the containment structure, the design criteria, the validation by analyses and experiments and the containment pressure test.

Large vessel imaging using cosmic-ray muons

International Nuclear Information System (INIS)

Jenneson, P.M.

2004-01-01

Cosmic-ray muons are assessed for their practical use in the tomographic imaging of the internal composition of large vessels over 2 m in diameter. The technique is based on the attenuation and scattering of cosmic-ray muons passing through a vessel and has advantages over photon-based methods of tomography that it is extendable to object containing high-density materials over many tens of metres. The main disadvantage is the length of time required to produce images of sufficient resolution and hence cosmic ray muon tomography will be most suited to the imaging of large structures whose internal composition is effectively static for the duration of the imaging period. Simulation and theoretical results are presented here which demonstrate the feasibility of cosmic ray muon tomography

Higher Fluid Balance Increases the Risk of Death From Sepsis: Results From a Large International Audit.

Science.gov (United States)

Sakr, Yasser; Rubatto Birri, Paolo Nahuel; Kotfis, Katarzyna; Nanchal, Rahul; Shah, Bhagyesh; Kluge, Stefan; Schroeder, Mary E; Marshall, John C; Vincent, Jean-Louis

2017-03-01

Excessive fluid therapy in patients with sepsis may be associated with risks that outweigh any benefit. We investigated the possible influence of early fluid balance on outcome in a large international database of ICU patients with sepsis. Observational cohort study. Seven hundred and thirty ICUs in 84 countries. All adult patients admitted between May 8 and May 18, 2012, except admissions for routine postoperative surveillance. For this analysis, we included only the 1,808 patients with an admission diagnosis of sepsis. Patients were stratified according to quartiles of cumulative fluid balance 24 hours and 3 days after ICU admission. ICU and hospital mortality rates were 27.6% and 37.3%, respectively. The cumulative fluid balance increased from 1,217 mL (-90 to 2,783 mL) in the first 24 hours after ICU admission to 1,794 mL (-951 to 5,108 mL) on day 3 and decreased thereafter. The cumulative fluid intake was similar in survivors and nonsurvivors, but fluid balance was less positive in survivors because of higher fluid output in these patients. Fluid balances became negative after the third ICU day in survivors but remained positive in nonsurvivors. After adjustment for possible confounders in multivariable analysis, the 24-hour cumulative fluid balance was not associated with an increased hazard of 28-day in-hospital death. However, there was a stepwise increase in the hazard of death with higher quartiles of 3-day cumulative fluid balance in the whole population and after stratification according to the presence of septic shock. In this large cohort of patients with sepsis, higher cumulative fluid balance at day 3 but not in the first 24 hours after ICU admission was independently associated with an increase in the hazard of death.

Safety of atmospheric storage tanks during accidental explosions

OpenAIRE

Noret , E.; Prod'Homme , Gaëtan; Yalamas , Thierry; Reimeringer , Mathieu; Hanus , Jean-Luc; Duong , Duy-Hung

2012-01-01

International audience; The occurrence of a chain reaction from blast on atmospheric storage tanks in oil and chemical facilities is hard to predict. The current French practice for SEVESO facilities ignores projectiles and assumes a critical peak overpressure value observed from accident data. This method could lead to conservative or dangerous assessments. This study presents various simple mechanical models to facilitate quick effective assessment of risk analysis, the results of which are...

Research on volume metrology method of large vertical energy storage tank based on internal electro-optical distance-ranging method

Science.gov (United States)

Hao, Huadong; Shi, Haolei; Yi, Pengju; Liu, Ying; Li, Cunjun; Li, Shuguang

2018-01-01

A Volume Metrology method based on Internal Electro-optical Distance-ranging method is established for large vertical energy storage tank. After analyzing the vertical tank volume calculation mathematical model, the key processing algorithms, such as gross error elimination, filtering, streamline, and radius calculation are studied for the point cloud data. The corresponding volume values are automatically calculated in the different liquids by calculating the cross-sectional area along the horizontal direction and integrating from vertical direction. To design the comparison system, a vertical tank which the nominal capacity is 20,000 m3 is selected as the research object, and there are shown that the method has good repeatability and reproducibility. Through using the conventional capacity measurement method as reference, the relative deviation of calculated volume is less than 0.1%, meeting the measurement requirements. And the feasibility and effectiveness are demonstrated.

The large-s field-reversed configuration experiment

International Nuclear Information System (INIS)

Hoffman, A.L.; Carey, L.N.; Crawford, E.A.; Harding, D.G.; DeHart, T.E.; McDonald, K.F.; McNeil, J.L.; Milroy, R.D.; Slough, J.T.; Maqueda, R.; Wurden, G.A.

1993-01-01

The Large-s Experiment (LSX) was built to study the formation and equilibrium properties of field-reversed configurations (FRCs) as the scale size increases. The dynamic, field-reversed theta-pinch method of FRC creation produces axial and azimuthal deformations and makes formation difficult, especially in large devices with large s (number of internal gyroradii) where it is difficult to achieve initial plasma uniformity. However, with the proper technique, these formation distortions can be minimized and are then observed to decay with time. This suggests that the basic stability and robustness of FRCs formed, and in some cases translated, in smaller devices may also characterize larger FRCs. Elaborate formation controls were included on LSX to provide the initial uniformity and symmetry necessary to minimize formation disturbances, and stable FRCs could be formed up to the design goal of s = 8. For x ≤ 4, the formation distortions decayed away completely, resulting in symmetric equilibrium FRCs with record confinement times up to 0.5 ms, agreeing with previous empirical scaling laws (τ∝sR). Above s = 4, reasonably long-lived (up to 0.3 ms) configurations could still be formed, but the initial formation distortions were so large that they never completely decayed away, and the equilibrium confinement was degraded from the empirical expectations. The LSX was only operational for 1 yr, and it is not known whether s = 4 represents a fundamental limit for good confinement in simple (no ion beam stabilization) FRCs or whether it simply reflects a limit of present formation technology. Ideally, s could be increased through flux buildup from neutral beams. Since the addition of kinetic or beam ions will probably be desirable for heating, sustainment, and further stabilization of magnetohydrodynamic modes at reactor-level s values, neutral beam injection is the next logical step in FRC development. 24 refs., 21 figs., 2 tabs

Internal and International Migration Across the Urban Hierarchy in Albania.

Science.gov (United States)

Lerch, Mathias

2016-01-01

The interactions between the processes of urbanization and international migration in less developed and transition countries have important repercussions for socioeconomic development, but are not well understood. Based on the retrospective data from the Albanian Living Standards Measurement Survey 2008, we first assess the geography of migration in terms of the rural-urban continuum, the urban hierarchy and the outside world since 1990. We then investigate the spatio-temporal diffusion of rural-to-urban and international movements using survival models. Results reveal an immediate onset of large-scale rural exodus, despite the post-communist crisis. Internal migrants mainly moved to the capital, bypassing secondary cities, and were predominantly female. Initially, international migrants were primarily men who tended to originate from the main urban agglomerations. The diffusion of opportunities to emigrate down the urban hierarchy and across the sexes then redirected the rural exodus abroad, despite domestic economic development. This evolution in population mobility is related to the gendered patterns and interlinkages of the two flows, as well as to rising inequalities within the urban hierarchy.

Large-Eddy Simulation of Internal Flow through Human Vocal Folds

Science.gov (United States)

Lasota, Martin; Šidlof, Petr

2018-06-01

The phonatory process occurs when air is expelled from the lungs through the glottis and the pressure drop causes flow-induced oscillations of the vocal folds. The flow fields created in phonation are highly unsteady and the coherent vortex structures are also generated. For accuracy it is essential to compute on humanlike computational domain and appropriate mathematical model. The work deals with numerical simulation of air flow within the space between plicae vocales and plicae vestibulares. In addition to the dynamic width of the rima glottidis, where the sound is generated, there are lateral ventriculus laryngis and sacculus laryngis included in the computational domain as well. The paper presents the results from OpenFOAM which are obtained with a large-eddy simulation using second-order finite volume discretization of incompressible Navier-Stokes equations. Large-eddy simulations with different subgrid scale models are executed on structured mesh. In these cases are used only the subgrid scale models which model turbulence via turbulent viscosity and Boussinesq approximation in subglottal and supraglottal area in larynx.

Large-Eddy Simulation of Internal Flow through Human Vocal Folds

Directory of Open Access Journals (Sweden)

Lasota Martin

2018-01-01

Full Text Available The phonatory process occurs when air is expelled from the lungs through the glottis and the pressure drop causes flow-induced oscillations of the vocal folds. The flow fields created in phonation are highly unsteady and the coherent vortex structures are also generated. For accuracy it is essential to compute on humanlike computational domain and appropriate mathematical model. The work deals with numerical simulation of air flow within the space between plicae vocales and plicae vestibulares. In addition to the dynamic width of the rima glottidis, where the sound is generated, there are lateral ventriculus laryngis and sacculus laryngis included in the computational domain as well. The paper presents the results from OpenFOAM which are obtained with a large-eddy simulation using second-order finite volume discretization of incompressible Navier-Stokes equations. Large-eddy simulations with different subgrid scale models are executed on structured mesh. In these cases are used only the subgrid scale models which model turbulence via turbulent viscosity and Boussinesq approximation in subglottal and supraglottal area in larynx.

Pre-study of dynamic loads on the internals caused by a large pipe break in a BWR; Foerstudie av stroemningsinducerade laster paa interndelar vid brott i huvudcirkulationskretsarna i BWR

Energy Technology Data Exchange (ETDEWEB)

Marcinkiewicz, Jerzy; Lindgren, Anders [Det Norske Veritas Nuclear Technology AB, Stockholm (Sweden)

2002-12-01

Det Norske Veritas Nuclear Technology has performed a literature study of dynamic load on a BWR (Boiling Water Reactor) internals caused by a large pipe break. The goal of the study was to improve the knowledge about the physics of phenomena occurring in the RPV (Reactor Pressure Vessel) after pipe break in the main circulation system and also to make a review of calculation methods, models and computer programs including their capabilities when calculating the dynamic loads. The report presents description of relevant parts of a BWR, initial and boundary conditions, and phenomena determining the loads - rapid depressurization and propagation of pressure wave (including none-equilibrium). Furthermore, the report generally describes possible methodologies for calculating the dynamic loads on internals after the pipe break and the experiences from calculations the dynamic loads with different methods (computer programs) including comparisons with experimental data. Fluid-Structure Interaction methodology and its importance for calculation of dynamic loads on reactor internals is discussed based on experimental data. A very intensive research program for studying and calculating the dynamic loads on internals after pipe breaks has been performed in USA and Germany during the seventies and the eighties. Several computer programs have been developed and a number of large-scale experiments have been performed to calibrate the calculation methods. In spite of the fact that all experiments were performed for PWR several experiences should be valid also for BWR. These experiences, connected mainly to capabilities of computer programs calculating dynamic loads, are discussed in the report.

Energy harvesting by dynamic unstability and internal resonance for piezoelectric beam

Energy Technology Data Exchange (ETDEWEB)

Lan, Chunbo; Qin, Weiyang, E-mail: 353481781@qq.com; Deng, Wangzheng [Department of Engineering Mechanics, Northwestern Polytechnical University, Xi' an 710072 (China)

2015-08-31

We investigated the energy harvesting of a vertical beam with tip mass under vertical excitations. We applied dynamic unstability and internal resonance to improve the efficiency of harvesting. The experiments of harmonic excitation were carried out. Results show that for the beam there exist internal resonances in the dynamically unstable and the buckling bistable cases. The dynamic unstability is a determinant for strong internal resonance or mode coupling, which can be used to create a large output from piezoelectric patches. Then, the experiments of stochastic excitation were carried out. Results prove that the internal resonance or mode coupling can transfer the excitation energy to the low order modes, mainly the first and the second one. This can bring about a large output voltage. For a stochastic excitation, it is proved that there is an optimal weight of tip mass for realizing internal resonance and producing large outputs.

Cyberinfrastructure for international competitiveness

CSIR Research Space (South Africa)

Sithole, Happy M

2015-10-01

Full Text Available to international science projects such as the Large Hadron Collider at the European Organization for Nuclear Research, CERN. Benefits are being realised through efficient connectivity and decrease in the cost of bandwidth. In this presentation, Sithole will provide...

A Model of Internal Communication in Adaptive Communication Systems.

Science.gov (United States)

Williams, M. Lee

A study identified and categorized different types of internal communication systems and developed an applied model of internal communication in adaptive organizational systems. Twenty-one large organizations were selected for their varied missions and diverse approaches to managing internal communication. Individual face-to-face or telephone…

The prepossession of international institutions for energy. The example International Energy Agency (IEA)

International Nuclear Information System (INIS)

Fell, H.J.

2007-01-01

In the contribution under consideration, the author reports on the fact that large international energy agencies, which are advisory active in energy questions active, affect the world-wide policy. In particular, these are the International Atomic Energy Authority in Vienna (Austria) and the International Energy Agency in Paris (France). The International Energy Agency is considered world-wide as the most important institution for all energy questions. Nearly annually, it publishes the World Energy Outlook by summarizing the most important current energy data of the world, prognoses the future power supply and makes future energy prices. The reality of the International Energy Agency looks completely differently: It performs no own sciences, but consists of statisticians, who gather only statistical data without scientific analysis. The author of this contribution summarizes the work of the International Energy Agency in three points: (a) Promotion of the interests of companies in mineral oil, natural gas, coal and atomic energy; (b) Hindering the world-wide conversion of renewable energy; (c) Endangerment of the world economy and prevention of an effective climate protection. The International Energy Agency does not justice to its own goal of a reliable, economical and pollution free power supply

Organizational Structures that Support Internal Program Evaluation

Science.gov (United States)

Lambur, Michael T.

2008-01-01

This chapter explores how the structure of large complex organizations such as Cooperative Extension affects their ability to support internal evaluation of their programs and activities. Following a literature review of organizational structure and its relation to internal evaluation capacity, the chapter presents the results of interviews with…

History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

Science.gov (United States)

Banta, David; Jonsson, Egon; Childs, Paul

2009-07-01

The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

Globalization, Inequality & International Economic Law

Directory of Open Access Journals (Sweden)

Frank J. Garcia

2017-04-01

Full Text Available International law in general, and international economic law in particular, to the extent that either has focused on the issue of inequality, has done so in terms of inequality between states. Largely overlooked has been the topic of inequality within states and how international law has influenced that reality. From the perspective of international economic law, the inequality issue is closely entwined with the topics of colonialism and post-colonialism, the proper meaning of development, and globalization. While international economic law has undoubtedly contributed to the rise of inequality, it is now vital that the subject of international economic law be examined for how it may contribute to the lessening of inequality. To do so will require a shift in the way that we think, in order to address inequality as a problem of an emerging global market society, and how best to regulate that society and its institutions.

The international politics of climate engineering : A review and prospectus for international relations

NARCIS (Netherlands)

Horton, Joshua B.; Reynolds, Jesse

2016-01-01

Proposed large-scale intentional interventions in natural systems in order to counter climate change, typically called “climate engineering” or “geoengineering,” stand to dramatically alter the international politics of climate change and potentially much more. There is currently a significant and

A Novel Closed-head Model of Mild Traumatic Brain Injury Caused by Primary Overpressure Blast to the Cranium Produces Sustained Emotional Deficits in Mice

Directory of Open Access Journals (Sweden)

Scott A Heldt

2014-01-01

Full Text Available Emotional disorders are a common outcome from mild traumatic brain injury (TBI in humans, but their pathophysiological basis is poorly understood. We have developed a mouse model of closed-head blast injury using an air pressure wave delivered to a small area on one side of the cranium, which we have used to create mild TBI. We found that 20-psi blasts in 3-month old C57BL/6 male mice yielded no obvious behavioral or histological evidence of brain injury, while 25-40 psi blasts produced transient anxiety in an open field arena but little histological evidence of brain damage. By contrast, 50-60 psi blasts resulted in anxiety-like behavior in an open field arena that became more evident with time after blast. In additional behavioral tests conducted 2-8 weeks after blast, 50-60 psi mice also demonstrated increased acoustic startle, perseverance of learned fear, and enhanced contextual fear, as well as depression-like behavior and diminished prepulse inhibition. We found no evident cerebral pathology, however, and only scattered axonal degeneration in brain sections from 50-60 psi mice 3-8 weeks after blast. Thus, the TBI caused by single 50-60 psi blasts in mice exhibits the minimal neuronal loss coupled to diffuse axonal injury characteristic of human mild TBI. A reduction in the abundance of a subpopulation of excitatory projection neurons in basolateral amygdala enriched in Thy1 was, however, observed. The reported link of this neuronal population to fear suppression suggests their damage by mild TBI may contribute to the heightened anxiety and fearfulness observed after blast in our mice. Our overpressure air blast model of concussion in mice will enable further studies of the mechanisms underlying the diverse emotional deficits seen after mild TBI.

The Assessment of Risk Caused By Fire and Explosion in Chemical Process Industry: A Domino Effect-Based Study

OpenAIRE

Kadri , Farid; Chatelet , E.; Lallement , Patrick

2013-01-01

International audience; In the field of risks analysis, the domino effect has been documented in technical literature since 1947. The accidents caused by the domino effect are the most destructive accidents related to industrial plants. Fire and explosion are among the most frequent primary accidents for a domino effect due to the units under pressure and the storage of flammable and dangerous substances. Heat radiation and overpressure are one of major factors leading to domino effect on ind...

Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

International Nuclear Information System (INIS)

Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

2014-01-01

With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

Krylov subspace methods for the solution of large systems of ODE's

DEFF Research Database (Denmark)

Thomsen, Per Grove; Bjurstrøm, Nils Henrik

1998-01-01

In Air Pollution Modelling large systems of ODE's arise. Solving such systems may be done efficientliy by Semi Implicit Runge-Kutta methods. The internal stages may be solved using Krylov subspace methods. The efficiency of this approach is investigated and verified.......In Air Pollution Modelling large systems of ODE's arise. Solving such systems may be done efficientliy by Semi Implicit Runge-Kutta methods. The internal stages may be solved using Krylov subspace methods. The efficiency of this approach is investigated and verified....

Issues in International Climate Policy: Theory and Policy

NARCIS (Netherlands)

Ierland, van E.C.; Gupta, J.; Kok, M.T.J.

2003-01-01

Climate change is currently at the center of scientific and political debate, and the need for well-designed international climate policies is widely recognized. Despite this, the complexity of both the climate change problem and the international negotiation process has resulted in a large number

Innovation Initiatives in Large Software Companies

DEFF Research Database (Denmark)

Edison, Henry; Wang, Xiaofeng; Jabangwe, Ronald

2018-01-01

empirical studies on innovation initiative in the context of large software companies. A total of 7 studies are conducted in the context of large software companies, which reported 5 types of initiatives: intrapreneurship, bootlegging, internal venture, spin-off and crowdsourcing. Our study offers three......Context: To keep the competitive advantage and adapt to changes in the market and technology, companies need to innovate in an organised, purposeful and systematic manner. However, due to their size and complexity, large companies tend to focus on the structure in maintaining their business, which...... can potentially lower their agility to innovate. Objective:The aims of this study are to provide an overview of the current research on innovation initiatives and to identify the challenges of implementing those initiatives in the context of large software companies. Method: The investigation...

Electronic and atomic impacts on large clusters

International Nuclear Information System (INIS)

Gspann, J.

1982-01-01

Describing first the generation and properties of molecular beams of large Van der Waals clusters such as speed distribution, cluster size distribution, and internal temperature of the clusters, the review then features the results of electronic impacts on large clusters: metastable electronic cluster excitations, ejection of positive cluster ions of less than 100 atoms from much larger parent clusters, and ionization of the large clusters. Atomic impacts at thermal energies are treated with respect to the scattering cross section of the clusters, their drag coefficient in free molecular flow, and the peculiarities of impacts on helium clusters of either isotope. (Auth.)

The International Space University

Science.gov (United States)

Davidian, Kenneth J.

1990-01-01

The International Space University (ISU) was founded on the premise that any major space program in the future would require international cooperation as a necessary first step toward its successful completion. ISU is devoted to being a leading center for educating future authorities in the world space industry. ISU's background, goals, current form, and future plans are described. The results and benefits of the type of education and experience gained from ISU include technical reports describing the design projects undertaken by the students, an exposure to the many different disciplines which are a part of a large space project, an awareness of the existing activities from around the world in the space community, and an international professional network which spans all aspects of space activities and covers the globe.

Internal communication: challenges and instruments

International Nuclear Information System (INIS)

Stiopol, Mihaela; Rizea, Lavinia

2007-01-01

Mike Hughes, the publisher for Publicity Express once said that 'Without Public Relations a terrible thing happens: nothing'. The term 'Public Relations' describes the efficient and coherent organization of external and internal communication. A company has an external public and an internal one as well. The employees of an organization are important carriers of the message the organization wants to transmit, but moreover, they are the driving engine behind the success of an enterprise. Better informed employees are more confident and prepared to get involved in challenging tasks such as obtaining public support for nuclear power. Internal communication is the continuous flux of information on all hierarchic levels both horizontally and vertically. The efficient usage of internal communication tools brings great advantages and benefits for the managers and the personnel of an organization. Despite this, organizing an integrated internal communication strategy is a challenging effort for any PR department. The paper deals with the instruments of internal communication, the obstacles usually encountered and the possibilities to apply an integrated strategy in large companies operating in the nuclear field. (authors)

International migration desires related to subjective well-being

OpenAIRE

Cai, Ruohong; Esipova, Neli; Oppenheimer, Michael; Feng, Shuaizhang

2014-01-01

Previous research on the determinants of international migration has largely focused on objective factors, such as income. We instead use subjective well-being (SWB) to explain international migration desires, an expressed willingness to migrate. We find that individuals with higher SWB have lower international migration desires. At the individual level, the SWB-migration relationship appears to be more robust than the income-migration relationship. At the country level, national average SWB ...

The Follow-up IAEA International Mission on Remediation of Large Contaminated Areas Off-Site the Fukushima Daiichi Nuclear Power Plant, Tokyo and Fukushima Prefecture, Japan, 14-21 October 2013. Final Report

International Nuclear Information System (INIS)

2014-01-01

In October 2011, the IAEA conducted an International Mission to Japan to support the remediation of large contaminated areas off-site TEPCO's Fukushima Daiichi Nuclear Power Plant (NPP). In response to the request made by the Government of Japan, in October 2013, the IAEA organized a follow-up International Mission on remediation of large contaminated areas off-site TEPCO's Fukushima Daiichi NPP (hereinafter referred to as the 'Follow-up Mission' or the 'Mission') with the main purpose of evaluating the progress of the on-going remediation works achieved since the previous mission in October 2011. The Follow-up Mission Team involved 13 international experts. Additionally, 3 experts of the Working Group 5 (Subgroup 5.2, Remediation) in charge of preparing the IAEA Report on TEPCO Fukushima Daiichi Accident accompanied the Mission as observers to obtain first-hand information for the report. The Follow-up Mission had the following three objectives: 1. To provide assistance to Japan in assessing the progress made with the remediation of the Special Decontamination Area (not included in the previous mission of 2011) and the Intensive Contamination Survey Areas; 2. To review remediation strategies, plans and works, in view of the advice provided by the previous mission on remediation of large contaminated off-site areas; and 3. To share its findings with the international community as lessons learned. The Mission was conducted through the assessment of information provided to the Team and by means of professional and open discussions with the relevant institutions in Japan, including national, prefectural and local institutions. The Japanese authorities provided comprehensive information on their remediation programme. The Mission Team visited the affected areas, including several sites where activities on remediation were conducted. The Team also visited some temporary storage sites for radioactive waste and soil generated in the remediation activities, as well as a

Future issues in international safeguards

International Nuclear Information System (INIS)

Hakkila, E.A.; Markin, J.T.; Mullen, M.F.

1991-01-01

The introduction of large bulk-handling facilities into the internationally safeguarded, commercial nuclear fuel cycle, increased concerns for radiation exposure, and the constant level of resources available to the International Atomic Energy Agency (IAEA) are driving new and innovative approaches to international safeguards. Inspector resources have traditionally been allocated on a facility-type basis. Approaches such as randomization of inspections either within a facility or across facilities in a State or the application of a fuel-cycle approach within a State are being considered as means of conserving resources. Large bulk-handling facilities require frequent material balance closures to meet IAEA timeliness goals. Approaches such as near-real-time accounting, running book inventories, and adjusted running book inventories are considered as means to meet these goals. The automated facilities require that safeguards measures also be automated, leading to more reliance on operator-supplied equipment that must be authenticated by the inspectorate. New Non-Proliferation Treaty signatory States with advanced nuclear programs will further drain IAEA resources. Finally, the role of special inspections in IAEA safeguards may be expanded. This paper discusses these issues in terms of increasing safeguards effectiveness and the possible impact on operators. 14 refs

Sensitivity Study for Feed and Bleed Operation for Domestic CANDU Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Kim, K. S; Kim, B. S.; Yoo, H. K.; Kim, H. J. [Atomic Creative Technology Co., Daejeon (Korea, Republic of); Whang, S. W. [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2016-05-15

The purpose of this paper is to evaluate the effects of the feed and bleed operation using DCT(Degassing Condenser Tank) over-pressure protection valves when LOCL4 with LOCL3 occurs during LPSD mid-loop operation. The CDF(Core Damage Frequency) of Level-1 Internal Event for Wolsong NPP Unit 1 during LPSD POS5A/5B accounts for about 89.08%(POS5A: 30.04%, POS5B: 59.04%) of the total CDF. For Wolsong NPP Unit 1 LPSD External Event, seismic analysis is excluded from this study because it is PSA-based SMA(Seismic Margin Assessment based Probabilistic Safety Assessment). For the domestic CANDU NPP, the feed and bleed operation using DCT over-pressure protection valves has been incorporated as an additional measure to mitigate the consequences during LPSD mid-loop operation. Since LOCL4 with LOCL3 is considered to be the event with highest frequency among all initial events, the effect of the feed and bleed operation on the safety of Nuclear Power Plant has been evaluated using PSA methodology.

International Humanitarian Award.

Science.gov (United States)

2017-12-01

The International Humanitarian Award recognizes extraordinary humanitarian services and activism by psychologists, including professional and volunteer work conducted primarily in the field with underserved populations. Award recipients are psychologists who, by their extraordinary service at a difficult time, improve the lives and contribute to the well-being of people in a large or small geographic area anywhere in the world. The 2017 recipient of the APA International Humanitarian Award was selected by the 2016 Committee on International Relations in Psychology (CIRP). The members of the 2016 CIRP were Melissa Morgan Consoli, PhD, and Arpana G. Inman, PhD (Co-chairs); Rehman Abdulrehman, PhD; Gonzalo Bacigalupe, EdD; Frederic Bemak, EdD; Brigitte Khoury, PhD; Susan Nolan, PhD; Nancy Sidun, PsyD; and Danny Wedding, PhD. Dr. Morgan Consoli, Dr. Inman, Dr. Nolan, and Doctor Sidun were members of the subcommittee for the 2017 award. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Benthic reef primary production in response to large amplitude internal waves at the Similan Islands (Andaman Sea, Thailand)

KAUST Repository

Jantzen, Carin

2013-11-29

Coral reefs are facing rapidly changing environments, but implications for reef ecosystem functioning and important services, such as productivity, are difficult to predict. Comparative investigations on coral reefs that are naturally exposed to differing environmental settings can provide essential information in this context. One prevalent phenomenon regularly introducing alterations in water chemistry into coral reefs are internal waves. This study therefore investigates the effect of large amplitude internal waves (LAIW) on primary productivity in coral reefs at the Similan Islands (Andaman Sea, Thailand). The LAIW-exposed west sides of the islands are subjected to sudden drops in water temperature accompanied by enhanced inorganic nutrient concentrations compared to the sheltered east. At the central island, Ko Miang, east and west reefs are only few hundred meters apart, but feature pronounced differences. On the west lower live coral cover (-38%) coincides with higher turf algae cover (+64%) and growth (+54%) compared to the east side. Turf algae and the reef sand-associated microphytobenthos displayed similar chlorophyll a contents on both island sides, but under LAIW exposure, turf algae exhibited higher net photosynthesis (+23%), whereas the microphytobenthos displayed reduced net and gross photosynthesis (-19% and -26%, respectively) accompanied by lower respiration (-42%). In contrast, the predominant coral Porites lutea showed higher chlorophyll a tissues contents (+42%) on the LAIW-exposed west in response to lower light availability and higher inorganic nutrient concentrations, but net photosynthesis was comparable for both sides. Turf algae were the major primary producers on the west side, whereas microphytobenthos dominated on the east. The overall primary production rate (comprising all main benthic primary producers) was similar on both island sides, which indicates high primary production variability under different environmental conditions. �

Large scale international bioenergy trading. How bioenergy trading can be reliazed under safe and sustainable frame conditions?

DEFF Research Database (Denmark)

Holm-Nielsen, Jens Bo; Kirchovas, Simas

2011-01-01

Biomass sources as Woodchips – Wood pellets, Straw – Bio pellets, animal manure, farm-by products and new cropping systems are integrated in our society’s needs. The mindset for shifting from fossil fuels based economies into sustainable energy economies already exist. Bioenergy utilization systems...... sustainability criteria. The sustainability criteria agreed internationally could be realized as a tool to secure the positive impacts of bioenergy and to foster the international trade. This study investigates the developments by national and international bodies of biomass standardization and certification...

Mineral vein dynamics modelling (FRACS II)

Energy Technology Data Exchange (ETDEWEB)

Urai, J.; Virgo, S.; Arndt, M. [RWTH Aachen (Germany); and others

2016-08-15

The Mineral Vein Dynamics Modeling group ''FRACS'' started out as a team of 7 research groups in its first phase and continued with a team of 5 research groups at the Universities of Aachen, Tuebingen, Karlsruhe, Mainz and Glasgow during its second phase ''FRACS 11''. The aim of the group was to develop an advanced understanding of the interplay between fracturing, fluid flow and fracture healing with a special emphasis on the comparison of field data and numerical models. Field areas comprised the Oman mountains in Oman (which where already studied in detail in the first phase), a siliciclastic sequence in the Internal Ligurian Units in Italy (closed to Sestri Levante) and cores of Zechstein carbonates from a Lean Gas reservoir in Northern Germany. Numerical models of fracturing, sealing and interaction with fluid that were developed in phase I where expanded in phase 11. They were used to model small scale fracture healing by crystal growth and the resulting influence on flow, medium scale fracture healing and its influence on successive fracturing and healing, as well as large scale dynamic fluid flow through opening and closing fractures and channels as a function of fluid overpressure. The numerical models were compared with structures in the field and we were able to identify first proxies for mechanical vein-hostrock properties and fluid overpressures versus tectonic stresses. Finally we propose a new classification of stylolites based on numerical models and observations in the Zechstein cores and continued to develop a new stress inversion tool to use stylolites to estimate depth of their formation.

Operating Reserves and Wind Power Integration: An International Comparison; Preprint

Energy Technology Data Exchange (ETDEWEB)

Milligan, M.; Donohoo, P.; Lew, D.; Ela, E.; Kirby, B.; Holttinen, H.; Lannoye, E.; Flynn, D.; O' Malley, M.; Miller, N.; Eriksen, P. B.; Gottig, A.; Rawn, B.; Gibescu, M.; Lazaro, E. G.; Robitaille, A.; Kamwa, I.

2010-10-01

This paper provides a high-level international comparison of methods and key results from both operating practice and integration analysis, based on an informal International Energy Agency Task 25: Large-scale Wind Integration.

Internal and External Readings of Same

DEFF Research Database (Denmark)

Hardt, Daniel

2016-01-01

Same is an anaphoric element that performs a comparison, which can either be external or internal to a sentence. Hardt and Mikkelsen (2015) show that same, unlike other anaphoric expressions, imposes a parallelism constraint, and they present three types of examples showing that same...... is infelicitous in the absence of parallelism. Hardt and Mikkelsen propose an account that applies uniformly to internal and external readings; however, the evidence they present largely targets external readings – they don’t offer empirical evidence that clearly supports the uniform approach. Furthermore, Barker...... (2007) argues that internal readings must be treated differently than external readings. In this paper, I show that the parallelism effects observed by Hardt and Mikkelsen in fact apply to internal readings as well. This provides support for a uniform treatment of internal and external readings of same...

Overview of soil phosphorus data from a large international soil database

NARCIS (Netherlands)

Batjes, N.H.

2014-01-01

An overiew of extractable soil phosphorus (P-Bray, P-Olsen, P-Mehlich and P-water) and P-retention data held in a large profile database is presented. The primary aim is to assess whether representative P-values, by broad soil group (FAO system), can be determined for each of these analytical

Internal dose assessment data management system for a large population of Pu workers

International Nuclear Information System (INIS)

Bertelli, L.; Miller, G.; Little, T.; Guilmette, R.A.; Glasser, S.M.

2007-01-01

This paper describes the design and implementation of the Los Alamos National Laboratory (LANL) dose assessment (DA) data system. Dose calculations for the most important radionuclides at LANL, namely plutonium, americium, uranium and tritium, are performed through the Microsoft Access DA database. DA includes specially developed forms and macros that perform a variety of tasks, such as retrieving bioassay data, launching the FORTRAN internal dosimetry applications and displaying dose results in the form of text summaries and plots. The DA software involves the following major processes: (1) downloading of bioassay data from a remote data source, (2) editing local and remote databases, (3) setting up and carrying out internal dose calculations using the UF code or the ID code, (3) importing results of the dose calculations into local results databases, (4) producing a secondary database of 'official results' and (5) automatically creating and e-mailing reports. The software also provides summary status and reports of the pending DAs, which are useful for managing the cases in process. (authors)

The Impact of Transport on International Trade Development

Directory of Open Access Journals (Sweden)

Pavlović Duško

2016-09-01

Full Text Available International trade implies transport of specific quantity of goods to (frequently large distances, the success of which depends on the safety and speed of delivery. These are greatly conditioned by the quality of means of transport and infrastructure. This is why international trade development is affected by transport, and the development of means of transport and infrastructure is, to a great extent, influenced by demand for international delivery of various commodities. This paper looks at the interdependence of international trade and transport, showing how transport played a very significant role in international trade development in the past as it does today, commensurate to the role of international trade in the development of carriers and transport infrastructure.

Sloshing response of a reactor tank with internals

International Nuclear Information System (INIS)

Ma, D.C.; Gvildys, J.; Chang, Y.W.

1984-01-01

The sloshing response of a large reactor tank with in-tank components is presented. The study indicates that the presence of the internal components can significantly change the dynamic characteristics of the sloshing motion. The sloshing frequency of a tank with internals is considerably higher than that of a tank without internal. The higher sloshing frequency reduces the sloshing wave height on the free-surface but increases the dynamic pressure in the fluid

Gas Flow Measurements On IFA-504 And IFA-6 10.1

International Nuclear Information System (INIS)

Braaten, Knut; Sandberg, Rune V.

1997-12-01

This report covers the recent axial gas flow measurements performed in the Halden reactor on IFA-504 and IFA-610.1. The measurements are performed during hot standby and at power. Gas flow measurements have been performed at regular intervals on the three rods with solid pellets in IFA-504, which has reached a burnup of about 68 MWd/kgUO 2 . The measurements show, as earlier, a decrease in the hydraulic diameters, where rod number 2 has a smaller hydraulic diameter than rod number 1 and 3. Rod 1, 2 and 3 have, at the end of -97, hydraulic diameters of 9, 2.5 and 9.5 jim respectively at full power (15 kW/m). IFA-610.1 was loaded into the core in July-97 with a pre-irradiated segment, and has as of December -97 a burnup of 54 MWd/kgUO 2 . The primary objective of this rig was to perform a 'lift off' experiment where internal pressurisation of the test rod should provoke cladding creep out which would also cause an increase in the flow area. The fuel rod was pressurised to 300 bar overpressure, by steps of 50 bar. The results show an increase in the pellet-clad hydraulic diameter of 4-5 mm that occurred upon pressurisation from 0 to 200 bar overpressure. There was no sign of any further increase in the hydraulic diameter after pressurisation to 300 bar for one week. The operation with 300 bar overpressure will be continued. (author)

Operational aspects of CASA UNO '88-The first large scale international GPS geodetic network

Science.gov (United States)

Neilan, Ruth E.; Dixon, T. H.; Meehan, Thomas K.; Melbourne, William G.; Scheid, John A.; Kellogg, J. N.; Stowell, J. L.

1989-01-01

For three weeks, from January 18 to February 5, 1988, scientists and engineers from 13 countries and 30 international agencies and institutions cooperated in the most extensive GPS (Global Positioning System) field campaign, and the largest geodynamics experiment, in the world to date. This collaborative eperiment concentrated GPS receivers in Central and South America. The predicted rates of motions are on the order of 5-10 cm/yr. Global coverage of GPS observations spanned 220 deg of longitude and 125 deg of latitude using a total of 43 GPS receivers. The experiment was the first civilian effort at implementing an extended international GPS satellite tracking network. Covariance analyses incorporating the extended tracking network predicted significant improvement in precise orbit determination, allowing accurate long-baseline geodesy in the science areas.

International Requirements for Large Integration of Renewable Energy Sources

DEFF Research Database (Denmark)

Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

2017-01-01

Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...... these overall objectives, and they each need to provide a detailed roadmap describing how they will meet these legally binding targets [2]. At this time, RES are an indispensable part of the global energy mix, which has been partially motivated by the continuous increases in hydropower as well as the rapid...

Self-Disclosure at International Cartels

DEFF Research Database (Denmark)

Brenner, Steffen

2011-01-01

We study revelation behavior at illegal international cartels. Our hypotheses suggest that a resource advantage induces executives of large multinational enterprises (MNEs) to be more likely to reveal the cartel and to cooperate with the antitrust agency during the prosecution stage. Moreover, we...

8th international workshop on large-scale integration of wind power into power systems as well as on transmission networks for offshore wind farms. Proceedings

International Nuclear Information System (INIS)

Betancourt, Uta; Ackermann, Thomas

2009-01-01

Within the 8th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Farms at 14th to 15th October, 2009 in Bremen (Federal Republic of Germany), lectures and posters were presented to the following sessions: (1) Keynote session and panel; (2) Grid integration studies and experience: Europe; (3) Connection of offshore wind farms; (4) Wind forecast; (5) High voltage direct current (HVDC); (6) German grid code issues; (7) Offshore grid connection; (8) Grid integration studies and experience: North America; (9) SUPWIND - Decision support tools for large scale integration of wind; (10) Windgrid - Wind on the grid: An integrated approach; (11) IEA Task 25; (12) Grid code issues; (13) Market Issues; (14) Offshore Grid; (15) Modelling; (16) Wind power and storage; (17) Power system balancing; (18) Wind turbine performance; (19) Modelling and offshore transformer.

Linking Large-Scale Reading Assessments: Comment

Science.gov (United States)

Hanushek, Eric A.

2016-01-01

E. A. Hanushek points out in this commentary that applied researchers in education have only recently begun to appreciate the value of international assessments, even though there are now 50 years of experience with these. Until recently, these assessments have been stand-alone surveys that have not been linked, and analysis has largely focused on…

A Fragment-Cloud Model for Breakup of Asteroids with Varied Internal Structures

Science.gov (United States)

Wheeler, Lorien; Mathias, Donovan; Stokan, Ed; Brown, Peter

2016-01-01

As an asteroid descends toward Earth, it deposits energy in the atmosphere through aerodynamic drag and ablation. Asteroid impact risk assessments rely on energy deposition estimates to predict blast overpressures and ground damage that may result from an airburst, such as the one that occurred over Chelyabinsk, Russia in 2013. The rates and altitudes at which energy is deposited along the entry trajectory depend upon how the bolide fragments, which in turn depends upon its internal structure and composition. In this work, we have developed an analytic asteroid fragmentation model to assess the atmospheric energy deposition of asteroids with a range of structures and compositions. The modeling approach combines successive fragmentation of larger independent pieces with aggregate debris clouds released with each fragmentation event. The model can vary the number and masses of fragments produced, the amount of mass released as debris clouds, the size-strength scaling used to increase the robustness of smaller fragments, and other parameters. The initial asteroid body can be seeded with a distribution of independent fragment sizes amid a remaining debris mass to represent loose rubble pile conglomerations, can be given an outer regolith later, or can be defined as a coherent or fractured monolith. This approach enables the model to represent a range of breakup behaviors and reproduce detailed energy deposition features such as multiple flares due to successive burst events, high-altitude regolith blow-off, or initial disruption of rubble piles followed by more energetic breakup of the constituent boulders. These capabilities provide a means to investigate sensitivities of ground damage to potential variations in asteroid structure.

Is the potential for international diversification disappearing?

DEFF Research Database (Denmark)

Christoffersen, Peter; Errunza, Vihang; Jacobs, Kris

2012-01-01

International equity markets are characterized by nonlinear dependence and asymmetries. We propose a new dynamic asymmetric copula model to capture long-run and short-run dependence, multivariate nonnormality, and asymmetries in large cross-sections. We find that correlations have increased...... markedly in both developed markets (DMs) and emerging markets (EMs), but they are much lower in EMs than in DMs. Tail dependence has also increased, but its level is still relatively low in EMs. We propose new measures of dynamic diversification benefits that take into account higher-order moments...... and nonlinear dependence. The benefits from international diversification have reduced over time, drastically so for DMs. EMs still offer significant diversification benefits, especially during large market downturns....

Using English for International Business: A European Case Study

Science.gov (United States)

Rogerson-Revell, Pamela

2007-01-01

With the continuing globalisation of markets and internationalisation of trade, professionals from a wide range of organisations, from large multinational corporations to small to medium size enterprises, are increasingly coming together to do business in the international workplace, particularly in meetings. Such international events usually…

Application of Conventional and K0-Based Internal Monostandard NAA Using Reactor Neutrons for Compositional Analysis of Large Samples

International Nuclear Information System (INIS)

Reddy, A.V.R.; Acharya, R.; Swain, K. K.; Pujari, P.K.

2018-01-01

Large sample neutron activation analysis (LSNAA) work was carried out for samples of coal, uranium ore, stainless steel, ancient and new clay potteries, dross and clay pottery replica from Peru using low flux high thermalized irradiation sites. Large as well as non-standard geometry samples (1 g - 0.5 kg) were irradiated using thermal column (TC) facility of Apsara reactor as well as graphite reflector position of critical facility (CF) at Bhabha Atomic Research Centre, Mumbai. Small size (10 - 500 mg) samples were also irradiated at core position of Apsara reactor, pneumatic carrier facility (PCF) of Dhruva reactor and pneumatic fast transfer facility (PFTS) of KAMINI reactor. Irradiation positions were characterized using indium flux monitor for TC and CF whereas multi monitors were used at other positions. Radioactive assay was carried out using high resolution gamma ray spectrometry. The k0-based internal monostandard NAA (IM-NAA) method was used to determine elemental concentration ratios with respect to Na in coal and uranium ore samples, Sc in pottery samples and Fe in stainless steel. Insitu relative detection efficiency for each irradiated sample was obtained using γ rays of activation products in the required energy range. Representative sample sizes were arrived at for coal and uranium ore from the plots of La/Na ratios as a function of the mass of the sample. For stainless steel sample of SS 304L, the absolute concentrations were calculated from concentration ratios by mass balance approach since all the major elements (Fe, Cr, Ni and Mn) were amenable to NAA. Concentration ratios obtained by IM-NAA were used for provenance study of 30 clay potteries, obtained from excavated Buddhist sites of AP, India. The La to Ce concentration ratios were used for preliminary grouping and concentration ratios of 15 elements with respect to Sc were used by statistical cluster analysis for confirmation of grouping. Concentrations of Au and Ag were determined in not so

Effect of filling ratio on premixed methane/air explosion in an open-end pipe

Directory of Open Access Journals (Sweden)

Chang Guo

2016-06-01

Full Text Available The propagation characteristics of premixed methane/air explosion under different filling ratios (20%, 30%, 40%, 50%, 60%, and 100% were studied using an experimental system. The results indicate that the peak overpressure showed a decreasing trend at the initial stage but then showed an increasing trend until reaching its maximum value under different filling ratios. As the explosion propagated to the open end, the overpressure showed a downtrend. At this point, the flame speed initially increased along the pipe but then dropped dramatically. In addition, the explosion overpressure and flame speed increased with the increase of filling ratio. However, when the filling ratio reached 50%, the explosion overpressure and flame speed tended to be stable and the increase was not obvious. These results will be of great importance in evaluating the explosive damage to equipment and human personnel working in coal mines or other chemical industries.

Magma Expansion and Fragmentation in a Propagating Dike (Invited)

Science.gov (United States)

Jaupart, C. P.; Taisne, B.

2010-12-01

The influence of magma expansion due to volatile exsolution and gas dilation on dike propagation is studied using a new numerical code. Many natural magmas contain sufficient amounts of volatiles for fragmentation to occur well below Earth's surface. Magma fragmentation has been studied for volcanic flows through open conduits but it should also occur within dikes that rise towards Earth's surface. We consider the flow of a volatile-rich magma in a hydraulic fracture. The mixture of melt and gas is treated as a compressible viscous fluid below the fragmentation level and as a gas phase carrying melt droplets above it. A numerical code solves for elastic deformation of host rocks, the flow of the magmatic mixture and fracturing at the dike tip. With volatile-free magma, a dike fed at a constant rate in a uniform medium adopts a constant shape and width and rises at a constant velocity. With volatiles involved, magma expands and hence the volume flux of magma increases. With no fragmentation, this enhanced flux leads to acceleration of the dike. Simple scaling laws allow accurate predictions of dike width and ascent rate for a wide range of conditions. With fragmentation, dike behavior is markedly different. Due to the sharp drop of head loss that occurs in gas-rich fragmented material, large internal overpressures develop below the tip and induce swelling of the nose region, leading to deceleration of the dike. Thus, the paradoxical result is that, with no viscous impediment on magma flow and a large buoyancy force, the dike stalls. This process may account for some of the tuffisite veins and intrusions that are found in and around magma conduits, notably in the Unzen drillhole, Japan. We apply these results to the two-month long period of volcanic unrest that preceded the May 1980 eruption of Mount St Helens. An initial phase of rapid earthquake migration from the 7-8 km deep reservoir to shallow levels was followed by very slow progression of magma within the

Design and Construction of Large Size Micromegas Chambers for the ATLAS Upgrade of the Muon Spectrometer

Energy Technology Data Exchange (ETDEWEB)

NONE

2015-07-01

Large area Micromegas detectors will be employed for the first time in high-energy physics experiments. A total surface of about 150 m{sup 2} of the forward regions of the Muon Spectrometer of the ATLAS detector at LHC will be equipped with 8-layer Micromegas modules. Each module extends over a surface from 2 to 3 m{sup 2} for a total active area of 1200 m{sup 2}. Together with the small strip Thin Gap Chambers they will compose the two New Small Wheels, which will replace the innermost stations of the ATLAS end-cap muon tracking system in the 2018/19 shutdown. In order to achieve a 15% transverse momentum resolution for 1 TeV muons, in addition to an excellent intrinsic resolution, the mechanical precision of each plane of the assembled module must be as good as 30 μm along the precision coordinate and 80 μm perpendicular to the chamber. In the prototyping towards the final configuration two similar quadruplets with dimensions 1.2 x 0.5 m{sup 2} have been built with the same structure as foreseen for the NSW upgrade. It represents the first example of a Micromegas quadruplet ever built, realized using the resistive-strip technology and decoupling the amplification mesh from the readout structure. All readout planes are segmented into strips with a pitch of 400 μm for a total of 4096 strips. In two of the four planes the strips are inclined by 1.5 deg. and provide a measurement of the second coordinate. The design and construction procedure of the Micromegas modules will be presented, as well as the design for the assembly of modules onto the New Small Wheel. Emphasis will be given on the methods developed to achieve the challenging mechanical precision. Measurements of deformation on chamber prototypes as a function of thermal gradients, gas over-pressure and internal stress (mesh tension and module fixation on supports) will be also shown in comparison to simulation. These tests were essential in the development of the final design in order to minimize the

Safety analysis of high pressure gasous fuel container punctures

Energy Technology Data Exchange (ETDEWEB)

Swain, M.R. [Univ. of Miami, Coral Gables, FL (United States)

1995-09-01

The following report is divided into two sections. The first section describes the results of ignitability tests of high pressure hydrogen and natural gas leaks. The volume of ignitable gases formed by leaking hydrogen or natural gas were measured. Leaking high pressure hydrogen produced a cone of ignitable gases with 28{degrees} included angle. Leaking high pressure methane produced a cone of ignitable gases with 20{degrees} included angle. Ignition of hydrogen produced larger overpressures than did natural gas. The largest overpressures produced by hydrogen were the same as overpressures produced by inflating a 11 inch child`s balloon until it burst.

Trends in international health development.

Science.gov (United States)

Lien, Lars

2002-01-01

"... Good population health is a crucial input into poverty reduction, economic growth and long-term economic development... This point is widely recognised by analysts and policy makers, but is greatly underestimated in its qualitative and quantitative significance, and in the investment allocations of many developing country and donor governments."--Commission on Macroeconomics and Health The international health development scene has changed rapidly during the past 5 years. From being a merely bilateral effort together with a few multilateral organisations and many NGOs new global partnerships have entered the scene and become major funding agencies. The provision of aid has also changed from small-scale project basis to financial support of large programmes. The purpose of this article is to describe some of the major transformations taken place in the organising, delivery and objective of international health development. But before presenting the new international health development agenda, a short introduction to the challenges inducing the need for renewed thinking about international aid is shortly presented.

The Internationalization Process of International New Ventures: The Case of Skype

OpenAIRE

Chan, Cheuk-Hay

2007-01-01

Past literature has emphasized on large, long-established multinational enterprises (MNEs) in international business. However, the emerging phenomenon of international new ventures has attracted much attention due to their distinctive internationalization processes. Skype Technologies S.A. is one of these international new ventures with comparable characteristics, albeit it has shown differences compared with the typical international new ventures. This research aims to compare and contrast t...

Is the Potential for International Diversification Disappearing? A Dynamic Copula Approach

DEFF Research Database (Denmark)

Christoffersen, Peter; Errunza, Vihang; Jacobs, Kris

International equity markets are characterized by nonlinear dependence and asymmetries. We propose a new dynamic asymmetric copula model to capture long-run and short-run dependence, multivariate nonnormality, and asymmetries in large cross-sections. We find that copula correlations have increased...... and nonlinear dependence. The bene…fits from international diversi…cation have reduced over time, drastically so for DMs. EMs still offer signi…cant diversi…cation bene…ts, especially during large market downturns....

Nuclear fuel assembly for fast neutron reactors

International Nuclear Information System (INIS)

Ilyunin, V.G.; Murogov, V.M.; Troyanov, M.F.; Rinejskij, A.A.; Ustinov, G.G.; Shmelev, A.N.

1982-01-01

The fuel assembly of a fast reactor consists of fuel elements comprising sections with fissionable and breeding material and tubes with hollows designed for entrapping gaseous fission products. Tubes joining up to the said sections are divided in a middle and a peripheral group such that at least one of the tube groups is placed in the space behind the coolant inlet ports. The configuration above allows reducing internal overpressure in the fuel assembly, thus reducing the volume of necessary structural elements in the core. (J.B.)

The Atomics International (AI) prototype large breeder reactor (PLBR)

International Nuclear Information System (INIS)

McDonald, J.S.; Campise, A.V.; Brunings, J.

1978-01-01

The AI-PLBR breeder plant design prepared for ERDA and EPRI is of 1000 MWe size, utilizing a loop-type sodium system configuration and producing 2200 psig/850 0 F steam. A 'bullseye' core geometry type sodium system configuration and is employed with Pu0 2 -UO 2 fuel and UO 2 fertile material. The reactor outlet coolant temperature is 930 0 F. A modified 'A'-frame refueling system is employed, which is capable of handling 1/3 of a core loading in 12 days. An inducer-type mechanical pump is used in the primary circuit because of its excellent NPSH characteristics. Hockey sticks steam generators are used to produce near-fossil steam conditions at the turbine throttle. The balance of plant (BOP) design was developed by the architectural-engineering firm of Burns and Roe. It includes Allis-Chalmers - KWU 1800-rpm tandem-compound turbine, selected with high-,intermediate-, and two double-flow low-pressure cylinders equipped with two moisture separator cyclones. A design feature to enhance the licensability of the reference design is the three-level Decay Heat Removal System (DHRS), which consists of normal, backup, and diverse decay heat removal paths. The Atomics International PLBR design illustrated the technical soundness of the LMFBR system for meeting the world's long-term electrical energy supply needs. The design includes design features to assure licensability and innovative engineering features to enhance reliability, constructability, economics, and U.S. utility grid compatibility. The design concept provides a sound basis for the future detailed design of a prototype plant and subsequent development of larger LMFBR plants. (author)

A robust and high-performance queue management controller for large round trip time networks

Science.gov (United States)

Khoshnevisan, Ladan; Salmasi, Farzad R.

2016-05-01

Congestion management for transmission control protocol is of utmost importance to prevent packet loss within a network. This necessitates strategies for active queue management. The most applied active queue management strategies have their inherent disadvantages which lead to suboptimal performance and even instability in the case of large round trip time and/or external disturbance. This paper presents an internal model control robust queue management scheme with two degrees of freedom in order to restrict the undesired effects of large and small round trip time and parameter variations in the queue management. Conventional approaches such as proportional integral and random early detection procedures lead to unstable behaviour due to large delay. Moreover, internal model control-Smith scheme suffers from large oscillations due to the large round trip time. On the other hand, other schemes such as internal model control-proportional integral and derivative show excessive sluggish performance for small round trip time values. To overcome these shortcomings, we introduce a system entailing two individual controllers for queue management and disturbance rejection, simultaneously. Simulation results based on Matlab/Simulink and also Network Simulator 2 (NS2) demonstrate the effectiveness of the procedure and verify the analytical approach.

Numerical Study of Severe Accidents on Containment Venting Conditions

Energy Technology Data Exchange (ETDEWEB)

Lee, Na Rae; Bang, Young Suk; Park, Tong Kyu; Lee, Doo Yong [FNC Technology Co., Yongin (Korea, Republic of); Choi, Yu Jung; Lee, Sang Won; Kim, Hyeong Taek [KHNP-CRI, Daejeon (Korea, Republic of)

2014-10-15

Under severe accident, the containment integrity can be challenged due to over-pressurization by steam and non-condensable gas generation. According to Seismic Probabilistic Safety Assessment (PSA) result, the late containment failure by over-pressurization has been identified as the most probable containment failure mode. In addition, the analyses of Fukushima nuclear power plant accident reveal the necessity of the proper containment depressurization to prevent the large release of the radionuclide to environment. Containment venting has been considered as an effective approach to maintain the containment integrity from over-pressurization. Basic idea of containment venting is to relieve the pressure inside of the containment by establishing a flow path to the external environment. To ensure the containment integrity under over-pressure conditions, it is crucial to conduct the containment vent in a timely manner with a sufficient discharge flow rate. It is also important to optimize the vent line size to prevent additional risk of leakage and to install at the site with limited space availability. The purpose of this study is to identify the effective venting conditions for preventing the containment over-pressurization and investigate the vent flow characteristics to minimize the consequence of the containment ventilation.. In order that, thermodynamic behavior of the containment and the discharged flow depending on different vent strategies are analyzed and compared. The representative accident scenarios are identified by reviewing the Level 2 PSA result and the sensitivity analyses with varying conditions (i.e. vent line size and vent initiation pressure) are conducted. MAAP5 model for the OPR1000 Korea nuclear power plant has been used for severe accident simulations. Containment venting can be an effective strategy to prevent the significant failure of the containment due to over-pressurization. However, it should be carefully conducted because the vented

Numerical Study of Severe Accidents on Containment Venting Conditions

International Nuclear Information System (INIS)

Lee, Na Rae; Bang, Young Suk; Park, Tong Kyu; Lee, Doo Yong; Choi, Yu Jung; Lee, Sang Won; Kim, Hyeong Taek

2014-01-01

Under severe accident, the containment integrity can be challenged due to over-pressurization by steam and non-condensable gas generation. According to Seismic Probabilistic Safety Assessment (PSA) result, the late containment failure by over-pressurization has been identified as the most probable containment failure mode. In addition, the analyses of Fukushima nuclear power plant accident reveal the necessity of the proper containment depressurization to prevent the large release of the radionuclide to environment. Containment venting has been considered as an effective approach to maintain the containment integrity from over-pressurization. Basic idea of containment venting is to relieve the pressure inside of the containment by establishing a flow path to the external environment. To ensure the containment integrity under over-pressure conditions, it is crucial to conduct the containment vent in a timely manner with a sufficient discharge flow rate. It is also important to optimize the vent line size to prevent additional risk of leakage and to install at the site with limited space availability. The purpose of this study is to identify the effective venting conditions for preventing the containment over-pressurization and investigate the vent flow characteristics to minimize the consequence of the containment ventilation.. In order that, thermodynamic behavior of the containment and the discharged flow depending on different vent strategies are analyzed and compared. The representative accident scenarios are identified by reviewing the Level 2 PSA result and the sensitivity analyses with varying conditions (i.e. vent line size and vent initiation pressure) are conducted. MAAP5 model for the OPR1000 Korea nuclear power plant has been used for severe accident simulations. Containment venting can be an effective strategy to prevent the significant failure of the containment due to over-pressurization. However, it should be carefully conducted because the vented

1995 International Sherwood Fusion Theory Conference

International Nuclear Information System (INIS)

1995-01-01

This book is a guide to the 1995 International Sherwood Fusion Theory Conference. It consists largely of abstracts of the oral and poster presentations that were to be made, and gives some general information about the conference and its schedule

Individualized Internal and External Training Load Relationships in Elite Wheelchair Rugby Players.

Science.gov (United States)

Paulson, Thomas A W; Mason, Barry; Rhodes, James; Goosey-Tolfrey, Victoria L

2015-01-01

The quantification and longitudinal monitoring of athlete training load (TL) provides a scientific explanation for changes in performance and helps manage injury/illness risk. Therefore, accurate and reliable monitoring tools are essential for the optimization of athletic performance. The aim of the present study was to establish the relationship between measures of internal [heart rate (HR) and session RPE (sRPE)] and external TL specific to wheelchair rugby (WR). Fourteen international WR athletes (age = 29 ± 7 years; body mass = 58.9 ± 10.9 kg) were monitored during 18 training sessions over a 3 month period during the competitive phase of the season. Activity profiles were collected during each training session using a radio-frequency based indoor tracking system (ITS). External TL was quantified by total distance (m) covered as well as time spent and distance covered in a range of classification-specific arbitrary speed zones. Banister's TRIMP, Edwards's summated HR zone (SHRZ), and Lucia's TRIMP methods were used to quantify physiological internal TL. sRPE was calculated as the product of session duration multiplied by perceived exertion using the Borg CR10 scale. Relationships between external and internal TL were examined using correlation coefficients and the 90% confidence intervals (90% CI). sRPE (r = 0.59) and all HR-based (r > 0.80) methods showed large and very large relationships with the total distance covered during training sessions, respectively. Large and very large correlations (r = 0.56 - 0.82) were also observed between all measures of internal TL and times spent and distances covered in low and moderate intensity speed zones. HR-based methods showed very large relationships with time (r = 0.71-0.75) and distance (r = 0.70-0.73) in the very high speed zone and a large relationship with the number of high intensity activities (HIA) performed (r = 0.56-0.62). Weaker relationships (r = 0.32-0.35) were observed between sRPE and all measures of

Individualised internal and external training load relationships in elite wheelchair rugby players

Directory of Open Access Journals (Sweden)

Thomas Andrew William Paulson

2015-12-01

Full Text Available Aim: The quantification and longitudinal monitoring of athlete training load (TL provides a scientific explanation for changes in performance and helps manage injury/illness risk. The aim of the present study was to establish the relationship between measures of internal (heart rate (HR and session RPE (sRPE and external TL specific to wheelchair rugby (WR. Methods: Fourteen international WR athletes (age = 29 ± 7 yrs; body mass = 58.9 ± 10.9 kg were monitored during 18 training sessions over a 3 month period. Activity profiles were collected during each training session using a radio-frequency based indoor tracking system. External TL was quantified by total distance (m covered as well as time spent and distance covered in a range of classification-specific arbitrary speed zones. Banister’s TRIMP, Edwards’s summated HR zone (SHRZ and Lucia’s TRIMP methods were used to quantify physiological internal TL. sRPE was calculated as the product of session duration multiplied by perceived exertion using the Borg CR10 scale. Relationships between external and internal TL were examined using correlation coefficients and the 90% confidence intervals (90% CI. Results: sRPE (r=0.59 and all HR-based (r >0.80 methods showed large and very large relationships with the total distance covered during training sessions, respectively. Large and very large correlations (r =0.56-0.82 were also observed between all measures of internal TL and times spent and distances covered in low and moderate intensity speed zones. HR-based methods showed very large relationships with time (r=0.71-0.75 and distance (r=0.70-0.73 in the very high speed zone and a large relationship with the number of high intensity activities performed (r=0.56-0.62. Weaker relationships (r=0.32–0.35 were observed between sRPE and all measures of high intensity activity. A large variation of individual correlation co-efficient was observed between sRPE and all external TL measures

Individual Consequences of Internal Marketing

Directory of Open Access Journals (Sweden)

Naghi Remus Ionut

2015-07-01

Full Text Available Since the emergence of the concept of internal marketing in the literature there have been almost 40 years. This period was marked by a constant increase of the concerns in the internal marketing area, these efforts being evidenced by the publication of a consistent number of articles (conceptual and empirical which analyze this subject. Considering the previous empirical studies, most of them have focused on studying the relationship between internal marketing and employee satisfaction and / or organizational commitment. However, the relationship between internal marketing and its consequences has been less analyzed in the context of emergent economies. In this paper we aimed to analyze the individual consequences of the internal marketing in the Romanian economy context, focusing our attention on three constructs: employee satisfaction, organizational commitment and organizational citizenship behavior. The research was conducted on a sample of 83 medium and large companies in various sectors of the Romanian economy. In order to proceed with the statistical data analyses we followed these steps: verifying the scales reliability, determining factor loadings and research hypotheses testing. Our research results are consistent with results of previous studies showing that the adoption of internal marketing practice has a positive effect on employee satisfaction, organizational commitment and organizational citizenship behavior

Waves in geophysical fluids tsunamis, rogue waves, internal waves and internal tides

CERN Document Server

Schneider, Wilhelm; Trulsen, Karsten

2006-01-01

Waves in Geophysical Fluids describes: the forecasting and risk evaluation of tsunamis by tectonic motion, land slides, explosions, run-up, and maps the tsunami sources in the world's oceans; stochastic Monte-Carlo simulations and focusing mechanisms for rogue waves, nonlinear wave models, breather formulas, and the kinematics of the Draupner wave; the full story about the discovery of the very large oceanic internal waves, how the waves are visible from above through the signatures on the sea surface, and how to compute them; observations of energetic internal tides and hot spots from several field campaigns in all parts of the world's oceans, with interpretation of spectra. An essential work for students, scientists and engineers working with the fundamental and applied aspects of ocean waves.

Animal Research International: Editorial Policies

African Journals Online (AJOL)

Focus and Scope. Animal Research International is an online Journal inaugurated in University of Nigeria to meet the growing need for an indigenous and authoritative organ for the dissemination of the results of scientific research into the fauna of Africa and the world at large. Concise contributions on investigations on ...

International energy annual 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-04-01

The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power and geothermal, solar, and wind electric power. Also included are biomass electric power for Brazil and the US, and biomass, geothermal, and solar energy produced in the US and not used for electricity generation. This report is published to keep the public and other interested parties fully informed of primary energy supplies on a global basis. The data presented have been largely derived from published sources. The data have been converted to units of measurement and thermal values (Appendices E and F) familiar to the American public. 93 tabs.

International aspects of restrictions of ozone-depleting substances

Energy Technology Data Exchange (ETDEWEB)

McDonald, S.C.

1989-10-01

This report summarizes international efforts to protect stratospheric ozone. Also included in this report is a discussion of activities in other countries to meet restrictions in the production and use of ozone-depleting substances. Finally, there is a brief presentation of trade and international competitiveness issues relating to the transition to alternatives for the regulated chlorofluorocarbons (CFCs) and halons. The stratosphere knows no international borders. Just as the impact of reduced stratospheric ozone will be felt internationally, so protection of the ozone layer is properly an international effort. Unilateral action, even by a country that produces and used large quantities of ozone-depleting substances, will not remedy the problem of ozone depletion if other countries do not follow suit. 32 refs., 7 tabs.

Managerial Risk-taking in International Acquisitions in the Brewery Industry

DEFF Research Database (Denmark)

Geppert, Mike; Dörrenbächer, Christoph; Gammelgaard, Jens

2013-01-01

in the authors' view are significantly shaped by specific home country institutional influences. This study concerns the question of how different forms of ownership - concentrated (e.g. family and bank based) and dispersed (stock market based) - influence risk-taking and managerial decision-making in large......This paper deals with the role that institutional differences play in managerial risk-taking when firms engage in international acquisitions. It is assumed that multinational corporations (MNCs) have different interests and capabilities when dealing with international acquisition, which...... international acquisitions. Comparing a total of 12 large acquisitions of four leading MNCs in the global brewery industry, the paper shows that mutually reinforcing influences of country of origin (coordinated vs liberal market economies) and ownership (family ownership vs stock market ownership) lead...

77 FR 53177 - Large Power Transformers From the Republic of Korea: Antidumping Duty Order

Science.gov (United States)

2012-08-31

... DEPARTMENT OF COMMERCE International Trade Administration [A-580-867] Large Power Transformers... Commission (ITC), the Department is issuing an antidumping duty order on large power transformers from the... determination of sales at less than fair value in the antidumping duty investigation of large power transformers...

Large scale reflood test

International Nuclear Information System (INIS)

Hirano, Kemmei; Murao, Yoshio

1980-01-01

The large-scale reflood test with a view to ensuring the safety of light water reactors was started in fiscal 1976 based on the special account act for power source development promotion measures by the entrustment from the Science and Technology Agency. Thereafter, to establish the safety of PWRs in loss-of-coolant accidents by joint international efforts, the Japan-West Germany-U.S. research cooperation program was started in April, 1980. Thereupon, the large-scale reflood test is now included in this program. It consists of two tests using a cylindrical core testing apparatus for examining the overall system effect and a plate core testing apparatus for testing individual effects. Each apparatus is composed of the mock-ups of pressure vessel, primary loop, containment vessel and ECCS. The testing method, the test results and the research cooperation program are described. (J.P.N.)

Internal core tightener

International Nuclear Information System (INIS)

Brynsvold, G.V.; Snyder, H.J. Jr.

1976-01-01

An internal core tightener is disclosed which is a linear actuated (vertical actuation motion) expanding device utilizing a minimum of moving parts to perform the lateral tightening function. The key features are: (1) large contact areas to transmit loads during reactor operation; (2) actuation cam surfaces loaded only during clamping and unclamping operation; (3) separation of the parts and internal operation involved in the holding function from those involved in the actuation function; and (4) preloaded pads with compliant travel at each face of the hexagonal assembly at the two clamping planes to accommodate thermal expansion and irradiation induced swelling. The latter feature enables use of a ''fixed'' outer core boundary, and thus eliminates the uncertainty in gross core dimensions, and potential for rapid core reactivity changes as a result of core dimensional change. 5 claims, 12 drawing figures

Internal tides and deep diel fades in acoustic intensity.

Science.gov (United States)

White, Andrew W; Henyey, Frank S; Andrew, Rex K; Mercer, James A; Worcester, Peter F; Dzieciuch, Matthew A; Colosi, John A

2016-11-01

A mechanism is presented by which the observed acoustic intensity is made to vary due to changes in the acoustic path that are caused by internal-tide vertical fluid displacements. The position in range and depth of large-scale caustic structure is determined by the background sound-speed profile. Internal tides cause a deformation of the background profile, changing the positions of the caustic structures-which can introduce intensity changes at a distant receiver. Gradual fades in the acoustic intensity occurring over timescales similar to those of the tides were measured during a low-frequency (284-Hz) acoustic scattering experiment in the Philippine Sea in 2009 [White et al., J. Acoust. Soc. Am. 134(4), 3347-3358 (2013)]. Parabolic equation and Hamiltonian ray-tracing calculations of acoustic propagation through a plane-wave internal tide environmental model employing sound-speed profiles taken during the experiment indicate that internal tides could cause significant gradual changes in the received intensity. Furthermore, the calculations demonstrate how large-scale perturbations to the index of refraction can result in variation in the received intensity.

India's energy needs and areas of international cooperation

Energy Technology Data Exchange (ETDEWEB)

Wazir, S. N.

1980-03-15

India's energy position is poor because of relatively large imports of oil, and poor reserves. In the impending energy crisis, developing countries will suffer (whether or not it is oil-rich) unless international cooperation is forthcoming. Energy consumption patterns in India are shown in tables. Energy reserves are also analyzed, including nonconventional sources (geothermal, solar, etc.). Possible areas for international cooperation are explored. (DLC)

[Functional and Anatomic Outcomes of Primary and Secondary Internal Limiting Membrane Transplantation in Large and Persistent Macular Holes].

Science.gov (United States)

Hess, Jelka A; Michels, Stephan; Becker, Matthias D

2017-11-20

Background The gold standard therapy for full-thickness macular holes (FTMH) is vitrectomy (PPV) with peeling of the internal limiting membrane (ILM), gas tamponade of the vitreous cavity and postoperative face-down positioning. Nevertheless, eyes with large macular holes (> 400 µm) and surgical failures remain difficult to manage. Recently, ILM transplantation (ILM-TX) techniques were developed with acceptable results, advocating different mechanisms of hole closure: in such a setting, the ILM could serve as a scaffold for neuronal tissue in the pedicle ILM flap technique or the ILM could induce a contraction of the FTMH rims through shrinking of a folded ILM plug. Patients/Material and Methods This retrospective study evaluates the functional and anatomic outcomes following ILM-TX for large FTMH and failed FMTH surgery. Large holes (group 1) were treated by the pedicle flap and the plug technique. Persistent holes following vitrectomy and ILM peeling (group 2) were treated with the plug technique. All ILM-TX were performed under perfluorocarbon liquid (PFCL) with a subsequent silicone oil tamponade. Results In group 1 (6 eyes), three eyes had a free ILM graft and three eyes underwent a pedunculated ILM-TX. The mean best corrected visual acuity (BCVA, LogMar) before primary ILM-TX was 1.18 ± 0.54 with a mean initial hole size of 681 ± 106 µm and a photoreceptor defect (PRD) of 1829 ± 474 µm. Five of six eyes showed a postoperative anatomical macular hole closure (83%). The mean BCVA after a mean follow-up of 9.3 ± 5.1 months was 0.83 ± 0.31 after a free ILM graft and 0.95 ± 0.79 after a pedunculated ILM flap. The PRD reduced to 1781 ± 713 µm after a free ILM graft and 1148 ± 378 µm after a pedunculated ILM flap. In group 2 (7 eyes), all patients had failed initial macular hole surgery closure. Prior to free ILM-TX BCVA was 1.05 ± 0.41, the hole size was 433 ± 183 µm and PRD was 2012 ± 718�

Polarized internal targets for electronuclear experiments

International Nuclear Information System (INIS)

van den Brand, J.F.J.

1993-01-01

Polarized internal gas targets represent a unique opportunity for the measurement of spin observables in electro-nuclear physics. Two measurements will be discussed. First, spin observables have been measured in elastic and quasi-free scattering of 45, 200, 300, and 415 MeV polarized protons from a polarized 3 He internal gas target at the Indiana University Cyclotron Facility Cooler Ring. The data obtained constitute the first measurement of spin correlation parameters using a storage ring with polarized beam and polarized internal gas target. Second, a quasi-free (e,e'p) experiment using tensor polarized deuterium will be discussed. Here, the goal is the measurement of the S- and D-state parts of the proton spectral function by scattering 700 MeV electrons from an atomic beam source. Large acceptance detectors have been used in both experiments. The internal-target technique has broad applicability in nuclear and particle physics

THE THEORY OF INTERNATIONAL FINANCIAL CONTAGION

Directory of Open Access Journals (Sweden)

Iulia LUPU

2012-12-01

Full Text Available Financial contagion is a complex and multivariate process, with no widely accepted definition and an accurate measurement methodology. Contagion became more and more the central idea of research studies because it is perceived as a problem, and often associated with financial crises. The reason for that international diversification of investment portfolios is applied to protect against country risk, is no longer valid, correlations between markets largely vanishing its benefits. In this article we intend to present the ways in which the subject of international financial contagion was approached.

Contesting the International Illegitimacy of Torture

DEFF Research Database (Denmark)

Keating, Vincent Charles

2014-01-01

This article examines the effect of Bush administration's human rights preferences during the war on terror with respect to torture by analysing a large-n sample of public legitimation strategies of both the United States and other members of international society. The article asks two questions......: first, has the defection of the United States from these human rights norms led to a ‘norm cascade’ that delegitimized the norms? Second, did the material preponderance of the United States help it to legitimate its preferences in international society? The article argues that despite initial ambiguity...

Total internal reflection effect on gyrotropic interface

Science.gov (United States)

Glushchenko, Alexander G.; Glushchenko, Eugene P.; Zhukov, Sergey V.

2018-02-01

This article considers the physical features of total internal reflection at gyrotropic and isotropic interfaces for two cases: electrical gyrotropy (plasma) and magnetic gyrotropy (ferrite). It is shown that the plasma magnetization may lead to the formation of the total internal reflection effect, which does not occur in isotropic plasma. The threshold values of the magnetic field, which are necessary for the total internal reflection effect, are determined. The total internal reflection effect on a ferrite-dielectric interface for waves emanating from different angles is observed in various frequency ranges and magnetization fields. The study points out the possibility of changing the total internal reflection angle value in large limits due to a change in the external magnetic field magnitude. The calculation results of the total internal reflection angle dependence on the external magnetic field magnitude are presented. The formulas are elaborated for calculating the total internal reflection angles of different interfaces for gyrotropic and isotropic media. The generalized formulas are defined for calculating the Doppler effect in the gyrotropic media. The study demonstrates how the velocity of the media interface affects the limiting angle of total internal refection.

Negotiated risks. International talks on hazardous issues

International Nuclear Information System (INIS)

Avenhaus, Rudolf; Sjoestedt, Gunnar

2009-01-01

This book fills a major gap in the risk literature, as it brings together two research strands: risks, to which IIASA's research programs have contributed significantly over the years, culminating in the Risk and Vulnerability Program, and international negotiations, on which there is an abundance of published work, much of it resulting from the work of IIASA's Processes of International Negotiations Program. Throughout the book, it is pointed out that there are actor-driven risks, namely those posed by international negotiations themselves, and issue-driven risks which are caused by large-scale human activities. In fact, negotiated risks deal with some of the most serious risks facing humanity: climate change, nuclear activities, and weapons of mass destruction. The book contains both scientific analyses on the nature of internationally negotiated risks and analyses of concrete risks, both of which are of immense practical relevance in the larger context of international negotiations. (orig.)

Stent-Graft Repair of a Large Cervical Internal Carotid Artery Pseudoaneurysm Causing Dysphagia

International Nuclear Information System (INIS)

Gupta, Vivek; Niranjan, Khandelwal; Rawat, Lokesh; Gupta, A. K.

2009-01-01

Pseudoaneurysms of the cervical internal carotid artery (ICA) are rare and most frequently result from trauma, infection, or sometimes spontaneously. They have the potential to cause life-threatening hemorrhage; thus, their immediate management is necessary. Endovascular treatment by stent graft placement in the affected artery appears to be a safe and effective treatment option. We present a case of a child who presented with neck swelling and dysphagia caused by a ruptured cervical ICA pseudoaneurysm which was managed by stent graft placement.

Mortality during a Large-Scale Heat Wave by Place, Demographic Group, Internal and External Causes of Death, and Building Climate Zone.

Science.gov (United States)

Joe, Lauren; Hoshiko, Sumi; Dobraca, Dina; Jackson, Rebecca; Smorodinsky, Svetlana; Smith, Daniel; Harnly, Martha

2016-03-09

Mortality increases during periods of elevated heat. Identification of vulnerable subgroups by demographics, causes of death, and geographic regions, including deaths occurring at home, is needed to inform public health prevention efforts. We calculated mortality relative risks (RRs) and excess deaths associated with a large-scale California heat wave in 2006, comparing deaths during the heat wave with reference days. For total (all-place) and at-home mortality, we examined risks by demographic factors, internal and external causes of death, and building climate zones. During the heat wave, 582 excess deaths occurred, a 5% increase over expected (RR = 1.05, 95% confidence interval (CI) 1.03-1.08). Sixty-six percent of excess deaths were at home (RR = 1.12, CI 1.07-1.16). Total mortality risk was higher among those aged 35-44 years than ≥ 65, and among Hispanics than whites. Deaths from external causes increased more sharply (RR = 1.18, CI 1.10-1.27) than from internal causes (RR = 1.04, CI 1.02-1.07). Geographically, risk varied by building climate zone; the highest risks of at-home death occurred in the northernmost coastal zone (RR = 1.58, CI 1.01-2.48) and the southernmost zone of California's Central Valley (RR = 1.43, CI 1.21-1.68). Heat wave mortality risk varied across subpopulations, and some patterns of vulnerability differed from those previously identified. Public health efforts should also address at-home mortality, non-elderly adults, external causes, and at-risk geographic regions.

Management tools for R&D engineering projects: Coordination perspective for large international consortium (NeXOS)

Science.gov (United States)

Castro, Ayoze; Memè, Simone; Quevedo, Eduardo; Waldmann, Christoph; Pearlman, Jay; Delory, Eric; Llinás, Octavio

2017-04-01

NeXOS is a cross-functional and multidisciplinary project funded under the EU FP7 Program, which involves 21 organizations from six different European countries. They all have different backgrounds, interests, business models and perspectives. To be successful, NeXOS applied an international recognized management methodology tailored to the specific project's environment and conditions, with an explicit structure based on defined roles and responsibilities for the people involved in the project and a means for effective communication between them (Fig.1). The project, divided in four different stages of requirements, design, integration, validation and demonstration, allows a clearer monitor of its progress, a comparison of the level of achievement in accordance with the plan and an earlier detection of problems/issues, leading to implementation of less disruptive, but still effective corrective actions. NeXOS is following an ambitious plan to develop innovative sensor systems with a high degree of modularity and interoperability, starting with requirements definition through validation and demonstration phase. To make this integrative approach possible, a management development strategy has been used incorporating systems engineering methods (Fig.2). Although this is standard practice in software development and large scale systems such as aircraft production, it is still new in the ocean hardware business and therefore NeXOS was a test case for this development concept. The question is one of scale as ocean observation systems are typically built on the scale of a few with co-located teams. With a system of diverse technologies (optical, acoustic, platform interfaces), there are cultural differences that must be bridged. The greatest challenge is in the implementation and the willingness of different teams to work with an engineering process, which may help ultimate system integration, but may place additional burdens on individual participants. This presentation

Business groups and internal capital markets

NARCIS (Netherlands)

Gonenc, Halit; Kan, Ozgur B.; Karadagli, Ece C.

2007-01-01

We compare the performance of firms affiliated with diversified business groups with the performance of unaffiliated firms in Turkey, all emerging market. We address the question of whether group-affiliated firms create internal capital markets or control large cash flows. Our findings indicate that

Unraveling the diversity in arc volcanic eruption styles: Examples from the Aleutian volcanic arc, Alaska

Science.gov (United States)

Larsen, Jessica F.

2016-11-01

The magmatic systems feeding arc volcanoes are complex, leading to a rich diversity in eruptive products and eruption styles. This review focuses on examples from the Aleutian subduction zone, encompassed within the state of Alaska, USA because it exhibits a rich diversity in arc structure and tectonics, sediment and volatile influx feeding primary magma generation, crustal magma differentiation processes, with the resulting outcome the production of a complete range in eruption styles from its diverse volcanic centers. Recent and ongoing investigations along the arc reveal controls on magma production that result in diversity of eruptive products, from crystal-rich intermediate andesites to phenocryst-poor, melt-rich silicic and mafic magmas and a spectrum in between. Thus, deep to shallow crustal "processing" of arc magmas likely greatly influences the physical and chemical character of the magmas as they accumulate in the shallow crust, the flow physics of the magmas as they rise in the conduit, and eruption style through differences in degassing kinetics of the bubbly magmas. The broad spectrum of resulting eruption styles thus depends on the bulk magma composition, melt phase composition, and the bubble and crystal content (phenocrysts and/or microlites) of the magma. Those fundamental magma characteristics are in turn largely determined by the crustal differentiation pathway traversed by the magma as a function of tectonic location in the arc, and/or the water content and composition of the primary magmas. The physical and chemical character of the magma, set by the arc differentiation pathway, as it ascends towards eruption determines the kinetic efficiency of degassing versus the increasing internal gas bubble overpressure. The balance between degassing rate and the rate at which gas bubble overpressure builds then determines the conditions of fragmentation, and ultimately eruption intensity.

An empirical note on job turnover and internal mobility of workers

OpenAIRE

Hassink, W.H.J.

1995-01-01

I find that large firms have a higher rate of job turnover in which internal mobility of workers is involved. These firms are able to reduce turnover costs, by making use of their ability to attain a higher internal mobility rate.

Regulatory taxation of large energy users reconsidered

International Nuclear Information System (INIS)

Mannaerts, H.

2002-01-01

Energy policy in the Netherlands with respect to the basic industries has been restrained. National energy taxation is considered to be unsuitable for large energy users because of its international reallocation effects. However, alternative measures such as energy restrictions and marginal taxation induce low average and high marginal energy costs and consequently generate small displacement effects, together with large energy savings. A system of tradable permits not only has the advantage of low average and high marginal costs, but also keeps one firm from investing in relatively expensive energy-saving options while other firms refrain from exploiting their relatively cheap saving options

Search Results | Page 4 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 31 - 40 of 1310 ... It discusses risks and challenges when implementing open data initiatives. ... Presentation at the 2014 International Food Security Dialogue held ... age, largely based on findings from the Fish on Farms baseline survey.

A Nonlinear Dynamic Subscale Model for Partially Resolved Numerical Simulation (PRNS)/Very Large Eddy Simulation (VLES) of Internal Non-Reacting Flows

Science.gov (United States)

Shih, Tsan-Hsing; Liu, nan-Suey

2010-01-01

A brief introduction of the temporal filter based partially resolved numerical simulation/very large eddy simulation approach (PRNS/VLES) and its distinct features are presented. A nonlinear dynamic subscale model and its advantages over the linear subscale eddy viscosity model are described. In addition, a guideline for conducting a PRNS/VLES simulation is provided. Results are presented for three turbulent internal flows. The first one is the turbulent pipe flow at low and high Reynolds numbers to illustrate the basic features of PRNS/VLES; the second one is the swirling turbulent flow in a LM6000 single injector to further demonstrate the differences in the calculated flow fields resulting from the nonlinear model versus the pure eddy viscosity model; the third one is a more complex turbulent flow generated in a single-element lean direct injection (LDI) combustor, the calculated result has demonstrated that the current PRNS/VLES approach is capable of capturing the dynamically important, unsteady turbulent structures while using a relatively coarse grid.

Internationalism in sexually transmitted infections.

Science.gov (United States)

Waugh, M A

1997-12-01

The International Union Against the Venereal Diseases and the Treponematoses (IUVDT) became the International Union Against Sexually Transmitted Infections (IUSTI) at the Union's 37th General Assembly, held in Melbourne, Australia. The name change reflects the increasing use by international donor organizations of the term sexually transmitted infections (STIs). STIs are a major problem in Africa, South East Asia, India, Russia, and the European countries which were formerly within the Communist bloc. The epidemic of syphilis together with HIV increases daily in Eastern Europe and Russia. There have, however, been some successes in developing countries with the syndromic method, the promotion of sexual health, and the prevention of STIs. While the UK has the largest body of fully trained sexually transmitted disease (STD) specialists in the world, comparatively few of them participate in large international commitments. These specialists should instead become more involved with STIs in areas of need. Furthermore, more aid should be provided by governmental, nongovernmental, and charitable sources. IUSTI is willing to cooperate with any efforts to fight STDs anywhere in the world.

77 FR 42332 - Large Power Transformers From Korea; Revised Schedule for the Subject Investigation

Science.gov (United States)

2012-07-18

... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1189 (Final)] Large Power Transformers From Korea; Revised Schedule for the Subject Investigation AGENCY: United States International Trade Commission. ACTION: Notice. DATES: Effective Date: July 12, 2012. FOR FURTHER INFORMATION CONTACT: Edward...

Sediment compaction and pore pressure prediction in deepwater basin of the South China Sea: Estimation from ODP and IODP drilling well data

Science.gov (United States)

Xie, Yangbing; Wu, Tuoyu; Sun, Jin; Zhang, Hanyu; Wang, Jiliang; Gao, Jinwei; Chen, Chuanxu

2018-02-01

Overpressure in deepwater basins not only causes serious soft sediment deformation, but also significantly affects the safety of drilling operations. Therefore, prediction of overpressure in sediments has become an important task in deepwater oil exploration and development. In this study, we analyze the drilling data from ODP Leg 184 Sites 1144, 1146, and 1148, and IODP Leg 349 Sites U1431, U1432, U1433, and U1435 to study the sediment compaction and controls in the northern South China Sea. Sedimentation rate, sediment content, distribution area, and buried depth are the factors that influence sediment compaction in the deepwater basin of the South China Sea. Among these factors, the sediment content is the most important. The fitted normal compacted coefficients and mudline porosity for an interval of 50 m shows disciplinary variation versus depth. The pore pressure predicted from different fitted results shows varying overpressure situations. The normal compaction trend from Site 1144 reflects the porosity variation trend in stable deposition basins in the northern South China Sea. The predicted pore pressure shows overpressure at Site 1144, which is attributed to compaction disequilibrium. Nevertheless, the mixed lithology column may influence the predicted over-pressure at Site 1148, which is responsible for the confusing result. Above all, we find that sediment compaction should serve as a proxy for pore pressure in the deepwater basin of the South China Sea.

Structural dynamic and resistance to nuclear air blast

International Nuclear Information System (INIS)

Qureshi, S.M.

2003-01-01

A need exists to design protective shelters attached to specialized facilities against nuclear airbursts, explosive shocks and impacting projectiles. Designing such structures against nuclear and missile impact is a challenging task that needs to be looked into for design methodology formulation and practicability. Structures can be designed for overpressure pulsed generated by a nuclear explosion as well as the scabbing and perforation/punching of an impacting projectile. This paper discuses and formulates the methods of dynamic analysis and design required to undertake such a task. Structural resistance to peak overpressure pulse for a 20 KT weapons and smaller tactical nuclear weapons of 1 KT (16 psi, overpressure) size as a direct air blast overpressure has been considered in design of walls, beams and slabs of a special structure under review. The design of shear reinforcement as lacing is also carried out. Adopting the philosophy of strengthening and hardening can minimize the effect of air blast overpressure and projectile impact. The objective is to avoid a major structural failure. The structure then needs to be checked against ballistic penetration by a range of weapons or be required to resist explosive penetration from the charge detonated in contact with the structure. There is also a dire need to formulate protective guidelines for all existing and future critical facilities. (author)

Hydropower - internalized costs and externalized benefits

International Nuclear Information System (INIS)

Koch, F.H.

2002-01-01

The benefits of hydropower consist of the minimal level of noxious and greenhouse gas emissions, it's energy security from political instability, and its renewable, non-depletable nature. The costs of hydropower consist of negative effects on the river ecosystem and of social changes in communities in the vicinity of large projects. Public awareness of these costs has increased dramatically during the past two decades, and new hydro projects will not get approval unless adequate mitigation measures are taken to avoid, offset, or compensate for adverse environmental and social effects. To a very large extent, the hydropower industry has internalized what were previously social and environmental externalities. However, hydropower operators do not receive any compensation for the benefits, and to date their competitors (coal, natural gas, oil) have not been required to internalize their adverse environmental externalities. (emissions, depletion of supplies, and sometimes dependence on imported primary energy sources). This creates an uneven playing field, and the hydropower industry enthusiastically welcomes a discussion of this issue, and eventually measures to rectify the situation. The IEA Hydropower Agreement has completed a major international study on the environmental and social impacts of hydropower, and one major component of this study was a Life Cycle Assessment and comparison of all the most important electricity generation technologies. (author)

Large Emergency-Response Exercises: Qualitative Characteristics--A Survey

Science.gov (United States)

Lee, Yang-Im; Trim, Peter; Upton, Julia; Upton, David

2009-01-01

Exercises, drills, or simulations are widely used, by governments, agencies and commercial organizations, to simulate serious incidents and train staff how to respond to them. International cooperation has led to increasingly large-scale exercises, often involving hundreds or even thousands of participants in many locations. The difference between…

ISO: international standards development for nuclear technology

International Nuclear Information System (INIS)

Becker, K.

1981-01-01

The importance of internationally recognized standards for nuclear technology and safety is rapidly increasing for technical as well as economical and political reasons such as public acceptance and nuclear technology transfer to developing countries. The need for such standards is also evident because of the large number of nuclear installations sited close to international borders, and the export of nuclear installations from relatively few supplier countries to a large number of user countries. It is the purpose of this report to describe briefly the history, organizational structures and procedures, goals, accomplishments, problems, and future needs of the relevant activities of the International Organization for Standardization (ISO). ISO is composed of the partly governmental, partly non-governmental national standards bodies of 86 countries including China. The work of its Technical Committee (TC) 85 'Nuclear Energy' is mostly concerned with industrial applications, contractual aspects and international communication, for the benefit of both developed and developing countries. It works in close liaison with IAEA, which develops Codes and Guides addressed mainly to the regulatory aspects of nuclear power plants in developing countries. ISO/TC 85 has four sub-committees dealing with: (a) Terminology, Definitions, Units and Symbols (Secretariat USA, four working groups (WGs)); (b) Radiation Protection (Secretariat France, ten WGs); (c) Power Reactor Technology (Secretariat Sweden, nine WGs); (d) Nuclear Fuel Technology (Secretariat F.R. Germany, seven WGs). (author)

LAVA: Large scale Automated Vulnerability Addition

Science.gov (United States)

2016-05-23

LAVA: Large-scale Automated Vulnerability Addition Brendan Dolan -Gavitt∗, Patrick Hulin†, Tim Leek†, Fredrich Ulrich†, Ryan Whelan† (Authors listed...released, and thus rapidly become stale. We can expect tools to have been trained to detect bugs that have been released. Given the commercial price tag...low TCN) and dead (low liveness) program data is a powerful one for vulnera- bility injection. The DUAs it identifies are internal program quantities

PREFACE PASREG: The 7th International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials (Washington DC, 29-31 July 2010) PASREG: The 7th International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials (Washington DC, 29-31 July 2010)

Science.gov (United States)

Freyhardt, Herbert; Cardwell, David; Strasik, Mike

2010-12-01

Large grain, (RE)BCO bulk superconductors fabricated by top seeded melt growth (TSMG) are able to generate large magnetic fields compared to conventional, iron-based permanent magnets. Following 20 years of development, these materials are now beginning to realize their considerable potential for a variety of engineering applications such as magnetic separators, flywheel energy storage and magnetic bearings. MgB2 has also continued to emerge as a potentially important bulk superconducting material for engineering applications below 20 K due to its lack of granularity and the ease with which complex shapes of this material can be fabricated. This issue of Superconductor Science and Technology contains a selection of papers presented at the 7th International Workshop on the Processing and Applications of Superconducting (RE)BCO Large Grain Materials, including MgB2, held 29th-31sy July 2010 at the Omni Shoreham Hotel, Washington DC, USA, to report progress made in this field in the previous three year period. The workshop followed those held previously in Cambridge, UK (1997), Morioka, Japan (1999), Seattle, USA (2001), Jena, Germany (2003), Tokyo, Japan (2005) and again in Cambridge, UK (2007). The scope of the seventh PASREG workshop was extended to include processing and characterization aspects of the broader spectrum of bulk high temperature superconducting (HTS) materials, including melt-cast Bi-HTS and bulk MgB2, recent developments in the field and innovative applications of bulk HTS. A total of 38 papers were presented at this workshop, of which 30 were presented in oral form and 8 were presented as posters. The organizers wish to acknowledge the efforts of Sue Butler of the University of Houston for her local organization of the workshop. The eighth PASREG workshop will be held in Taiwan in the summer of 2012.

Search Results | Page 6 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 51 - 60 of 1366 ... Presentation at the 2014 International Food Security Dialogue held in ... age, largely based on findings from the Fish on Farms baseline survey. ... Communicating climate change risks for adaptation in coastal and delta ...

International Comparisons on Internal Labor Markets and Corporate Performance

Directory of Open Access Journals (Sweden)

Joonmo Cho

2003-12-01

Full Text Available This paper presents an analytical framework which demonstrates how the structures of corporate internal labor markets are formed within the broader labor and capital market context in the U.S. and Japan. This framework is then used to evaluate labor markets within Korean companies and to identify points of change which might promote greater efficiency. Prior to the Asian economic crisis, Korean conglomerates had large, closed internal labor markets. However, in the aftermath of the crisis, they have pursued structural downsizing and moved to open their labor markets. The empirical evidence introduced in this paper affirms the argument that the first step toward creating a flexible labor market in Korea should begin with establishing an efficient corporate governance structure. This implies that a simple switch from the Japanese paradigm for human resource management to an Anglo-American model or vice-versa may not improve internal labor market performance unless the change is accompanied by a solution to the problems posed by the minority controlling structure of Korean companies. The implications of this study for guiding policy in developing countries having labor market rigidities and underdeveloped corporate governance is clear. Capital market structure and corporate governance systems may provide an appropriate starting point for the development of any policies aimed at building an efficient human resource management system and a flexible labor market.

Environmental orientation of large energy companies? The large four and their contribution to environmental protection

International Nuclear Information System (INIS)

Kiyar, Dagmar

2014-01-01

The project is aimed to study the motivation and willingness for environmental engagement of the four large German energy companies RWE, E.ON, Vattenfall and EnBW. The two changes of political appraisal of nuclear energy by the German government occurred during the project. The work covers the following issues: Governance and climate policy, multi-level governance, corporate governance; climate topics in the management practice, energy policy and climate policy, national and international aspects, initiatives and engagement; research design and empirical investigations.

Internal tide transformation across a continental slope off Cape Sines, Portugal

Science.gov (United States)

Small, Justin

2002-04-01

During the INTIFANTE 99 experiment in July 1999, observations were made of a prominent internal undular bore off Cape Sines, Portugal. The feature was always present and dominant in a collection of synthetic aperture radar (SAR) images of the area covering the period before, during and after the trial. During the trial, rapid dissemination of SAR data to the survey ship enabled assessment of the progression of the feature, and the consequent planning of a survey of the bore coincident with a new SAR image. Large amplitude internal waves of 50 m amplitude in 250 m water depth, and 40 m in 100 m depth, were observed. The images show that the position of the feature is linked to the phase of the tide, suggesting an internal tide origin. The individual packets of internal waves contain up to seven waves with wavelengths in the range of 500-1500 m, and successive packets are separated by internal tide distances of typically 16-20 km, suggesting phase speeds of 0.35-0.45 m s -1. The internal waves were coherent over crest lengths of between 15 and 70 km, the longer wavefronts being due to the merging of packets. This paper uses the SAR data to detail the transformation of the wave packet as it passes across the continental slope and approaches the coast. The generation sites for the feature are discussed and reasons for its unusually large amplitude are hypothesised. It is concluded that generation at critical slopes of the bathymetry and non-linear interactions are the likely explanations for the large amplitudes.

International Business and Global Climate Change

Energy Technology Data Exchange (ETDEWEB)

Kolk, A.; Pinkse, J.

2008-11-15

Climate change has become an important topic on the business agenda with strong pressure being placed on companies to respond and contribute to finding solutions to this urgent problem. This text provides a comprehensive analysis of international business responses to global climate change and climate change policy. Embedded in relevant management literature, this book gives a concise treatment of developments in policy and business activity on global, regional and national levels, using examples and systematic data from a large number of international companies. The first part outlines the international climate policy landscape and voluntary initiatives taken by companies, both alone and together with others. The second part examines companies' strategies, covering innovation for climate change, as well as compensation via emissions trading and carbon offsetting. Written by well-known experts in the field, International Business and Global Climate Change illustrates how an environmental topic becomes strategically important in a mainstream sense, affecting corporate decision-making, business processes, products, reputation, advertising, communication, accounting and finance.

International Business and Global Climate Change

International Nuclear Information System (INIS)

Kolk, A.; Pinkse, J.

2008-11-01

Climate change has become an important topic on the business agenda with strong pressure being placed on companies to respond and contribute to finding solutions to this urgent problem. This text provides a comprehensive analysis of international business responses to global climate change and climate change policy. Embedded in relevant management literature, this book gives a concise treatment of developments in policy and business activity on global, regional and national levels, using examples and systematic data from a large number of international companies. The first part outlines the international climate policy landscape and voluntary initiatives taken by companies, both alone and together with others. The second part examines companies' strategies, covering innovation for climate change, as well as compensation via emissions trading and carbon offsetting. Written by well-known experts in the field, International Business and Global Climate Change illustrates how an environmental topic becomes strategically important in a mainstream sense, affecting corporate decision-making, business processes, products, reputation, advertising, communication, accounting and finance

The project De Caldas International Project: An example of a large-scale radwaste isolation natural analogue study

International Nuclear Information System (INIS)

Shea, M.

1995-01-01

The proper isolation of radioactive waste is one of today's most pressing environmental issues. Research is being carried out by many countries around the world in order to answer critical and perplexing questions regarding the safe disposal of radioactive waste. Natural analogue studies are an increasingly important facet of this international research effort. The Pocos de Caldas Project represents a major effort of the international technical and scientific community towards addressing one of modern civilization's most critical environmental issues - radioactive waste isolation

Identification of Non-HLA Genes Associated with Celiac Disease and Country-Specific Differences in a Large, International Pediatric Cohort.

Directory of Open Access Journals (Sweden)

Ashok Sharma

Full Text Available There are significant geographical differences in the prevalence and incidence of celiac disease that cannot be explained by HLA alone. More than 40 loci outside of the HLA region have been associated with celiac disease. We investigated the roles of these non-HLA genes in the development of tissue transglutaminase autoantibodies (tTGA and celiac disease in a large international prospective cohort study.A total of 424,788 newborns from the US and European general populations and first-degree relatives with type 1 diabetes were screened for specific HLA genotypes. Of these, 21,589 carried 1 of the 9 HLA genotypes associated with increased risk for type 1 diabetes and celiac disease; we followed 8676 of the children in a 15 y prospective follow-up study. Genotype analyses were performed on 6010 children using the Illumina ImmunoChip. Levels of tTGA were measured in serum samples using radio-ligand binding assays; diagnoses of celiac disease were made based on persistent detection of tTGA and biopsy analysis. Data were analyzed using Cox proportional hazards analyses.We found 54 single-nucleotide polymorphisms (SNPs in 5 genes associated with celiac disease (TAGAP, IL18R1, RGS21, PLEK, and CCR9 in time to celiac disease analyses (10-4>P>5.8x10-6. The hazard ratios (HR for the SNPs with the smallest P values in each region were 1.59, 1.45, 2.23, 2.64, and 1.40, respectively. Outside of regions previously associated with celiac disease, we identified 10 SNPs in 8 regions that could also be associated with the disease (P<10-4. A SNP near PKIA (rs117128341, P = 6.5x10-8, HR = 2.8 and a SNP near PFKFB3 (rs117139146, P<2.8x10-7, HR = 4.9 reached the genome-wide association threshold in subjects from Sweden. Analyses of time to detection of tTGA identified 29 SNPs in 2 regions previously associated with celiac disease (CTLA4, P = 1.3x10-6, HR = 0.76 and LPP, P = 2.8x10-5, HR = .80 and 6 SNPs in 5 regions not previously associated with celiac disease (P<10

Design evolution of large wind turbine generators

Science.gov (United States)

Spera, D. A.

1979-01-01

During the past five years, the goals of economy and reliability have led to a significant evolution in the basic design--both external and internal--of large wind turbine systems. To show the scope and nature of recent changes in wind turbine designs, development of three types are described: (1) system configuration developments; (2) computer code developments; and (3) blade technology developments.

International taxation and multinational firm decisions

NARCIS (Netherlands)

Barrios, S.; Huizinga, H.P.; Laeven, L.; Nicodeme, G.

2012-01-01

Using a large international firm-level data set, we examine the separate effects of host and additional parent country taxation on the location decisions of multinational firms. Both types of taxation are estimated to have a negative impact on the location of new foreign subsidiaries. The impact of

Data standards for the international virtual observatory

Directory of Open Access Journals (Sweden)

R J Hanisch

2006-11-01

Full Text Available A primary goal of the International Virtual Observatory Alliance, which brings together Virtual Observatory Projects from 16 national and international development projects, is to develop, evaluate, test, and agree upon standards for astronomical data formatting, data discovery, and data delivery. In the three years that the IVOA has been in existence, substantial progress has been made on standards for tabular data, imaging data, spectroscopic data, and large-scale databases and on managing the metadata that describe data collections and data access services. In this paper, I describe how the IVOA operates and give my views as to why such a broadly based international collaboration has been able to make such rapid progress.

Reciprocal relationships between parent and adolescent internalizing symptoms.

Science.gov (United States)

Hughes, Elizabeth K; Gullone, Eleonora

2010-04-01

Previous investigations of the association between parent and adolescent internalizing problems have been largely restricted to the unidirectional effect of parent symptoms on their children. This study therefore aimed to investigate potential reciprocal relationships between parent and adolescent internalizing symptoms. One-hundred and seventy-seven adolescents ages 14 to 18 years and their parents (172 mothers, 124 fathers) completed measures of depressive and anxiety symptoms at two time points, 6 months apart. Results supported reciprocity between maternal and adolescent internalizing symptoms but not between paternal and adolescent internalizing symptoms. In addition, the relationship between maternal symptoms and later adolescent symptoms was found to be partially mediated by maternal parenting self-esteem. The study highlights the potential impact of adolescent internalizing problems on maternal well-being, a phenomenon previously neglected in the literature. 2010 APA, all rights reserved

Reserves in western basins: Part 1, Greater Green River basin

Energy Technology Data Exchange (ETDEWEB)

1993-10-01

This study characterizes an extremely large gas resource located in low permeability, overpressured sandstone reservoirs located below 8,000 feet drill depth in the Greater Green River basin, Wyoming. Total in place resource is estimated at 1,968 Tcf. Via application of geologic, engineering and economic criteria, the portion of this resource potentially recoverable as reserves is estimated. Those volumes estimated include probable, possible and potential categories and total 33 Tcf as a mean estimate of recoverable gas for all plays considered in the basin. Five plays (formations) were included in this study and each was separately analyzed in terms of its overpressured, tight gas resource, established productive characteristics and future reserves potential based on a constant $2/Mcf wellhead gas price scenario. A scheme has been developed to break the overall resource estimate down into components that can be considered as differing technical and economic challenges that must be overcome in order to exploit such resources: in other words, to convert those resources to economically recoverable reserves. Total recoverable reserves estimates of 33 Tcf do not include the existing production from overpressured tight reservoirs in the basin. These have estimated ultimate recovery of approximately 1.6 Tcf, or a per well average recovery of 2.3 Bcf. Due to the fact that considerable pay thicknesses can be present, wells can be economic despite limited drainage areas. It is typical for significant bypassed gas to be present at inter-well locations because drainage areas are commonly less than regulatory well spacing requirements.

Study on the propagation law of shock wave resulting from coal and gas outburst

Institute of Scientific and Technical Information of China (English)

WANG Kai; ZHOU Ai-tao; ZHANG Pin; LI Chuan; GUO Yan-wei

2011-01-01

According to the formation of shock wave resulting from coal and gas outburst, the gas flow of coal and gas outburst was transformed from an unsteady flow to a steady one based on selected appropriate reference coordinates, and the mathematical expressions were then established by applying mass conservation, momentum conservation equation, and energy conservation equation. On this basis, analyzed gas flow mitigation of variable cross-section area and the outburst intensity, and the relations between cross-section area, velocity, and density; the relations between overpressures and outburst intensity were deduced. Furthermore, shock waves resulting from coal and gas outburst and outburst intensity were measured by experimental setup, the overpressure and outburst intensity of different gas pressures were obtained, and the similar conditions of the experiment were numerically simulated. The averaged overpressure and gas flow velocity of variable cross-section under different gas pressures were numerically derived. The results show that the averaged overpressure and outburst intensity obtained from simulation are in good agreement with the experimental results. Moreover, the gas flow velocity of variable cross-sections approximates to the theoretical analysis.

International energy outlook, 1992

International Nuclear Information System (INIS)

1992-01-01

This report presents the current Energy Information Administration (EIA) assessment of the long-term outlook for international energy markets. The historic political and economic changes occurring in Easter Europe and the former Soviet Union will, no doubt, transform regional markets and world trade. This report pays particular attention to energy markets and resources in those countries that were once a part of the Centrally Planned Economies (CPE's) and how prospective changes in these countries might influence the energy outlook for the rest of the world. Several major EIA estimates determine, in large part, the resulting energy projections presented here. These include estimates of the energy intensity of economic activity; oil and natural gas production capacities; nuclear and hydroelectric generation capacities; international coal trade; and the rate of incremental energy requirements met by alternatives to oil

Physics with large extra dimensions

CERN Document Server

Antoniadis, Ignatios

2004-01-01

The recent understanding of string theory opens the possibility that the string scale can be as low as a few TeV. The apparent weakness of gravitational interactions can then be accounted by the existence of large internal dimensions, in the submillimeter region. Furthermore, our world must be confined to live on a brane transverse to these large dimensions, with which it interacts only gravitationally. In my lecture, I describe briefly this scenario which gives a new theoretical framework for solving the gauge hierarchy problem and the unification of all interactions. I also discuss its main properties and implications for observations at both future particle colliders, and in non-accelerator gravity experiments. Such effects are for instance the production of Kaluza-Klein resonances, graviton emission in the bulk of extra dimensions, and a radical change of gravitational forces in the submillimeter range.

SME international entry mode choice and performance : A transaction cost perspective

NARCIS (Netherlands)

Brouthers, K.D.; Nakos, G.

2004-01-01

Although small and medium sized enterprises (SMEs) account for a significant portion of international trade, little is know about how they make international entry mode decisions. Transaction cost theory has been widely used to study entry mode selection for large firms. Here we apply the theory to

Pressure vessel failure at high internal pressure

International Nuclear Information System (INIS)

Laemmer, H.; Ritter, B.

1995-01-01

A RPV failure due to plastic instability was investigated using the ABAQUS finite element code together with a material model of thermal plasticity for large deformations. Not only rotational symmetric temperature distributions were studied, but also 'hot spots'. Calculations show that merely by the depletion of strength of the material - even at internal wall temperatures well below the melting point of the fuel elements of about 2000/2400 C - the critical internal pressure can decrease to values smaller than the operational pressure of 16 Mpa. (orig.)

A GASFLOW analysis of a steam explosion accident in a typical light-water reactor confinement building

International Nuclear Information System (INIS)

Travis, J.R.; Wilson, T.L.; Spore, J.W.; Lam, K.L.; Rao, D.V.

1994-01-01

Steam over-pressurization resulting from ex-vessel steam explosion (fuel-coolant interaction) may pose a serious challenge to the integrity of a typical light-water reactor confinement building. If the steam generation rate exceeds the removal capacity of the Airborne Activity Confinement System, confinement over pressurization occurs. Thus, there is a large potential for an uncontrolled and unfiltered release of fission products from the confinement atmosphere to the environment at the time of the steam explosion. The GASFLOW computer code was used to analyze the effects of a hypothetical steam explosion and the transport of steam and hydrogen throughout a typical light-water reactor confinement building. The effects of rapid pressurization and the resulting forces on the internal structures and the heat exchanger service bay hatch covers were calculated. Pressurization of the ventilation system and the potential damage to the ventilation fans and high-efficiency particulate air filters were assessed. Because of buoyancy forces and the calculated confinement velocity field, the hydrogen diffuses and mixes in the confinement atmosphere but tends to be transported to its upper region

SPOOL-FIRE: an IBM 370/195 code for the analysis of combined spray and pool burning of sodium

International Nuclear Information System (INIS)

Charak, I.; Person, L.W.

1976-01-01

A code for the computation of the pressure and temperatures within a containment building as a result of a sodium fire is described. The fire is assumed to occur in two distinct phases: a spray and a pool. The spray fire is conservatively assumed to occur instantaneously. The pool fire model used is the SOFIRE-II model developed by Atomics International. The code calculates all important temperatures, accounting for heat loss from the building to the environment, as well as leakage of the containment atmosphere under conditions of internal overpressure. The IBM CSMP methodology is used to solve the set of ordinary differential equations which model the system. The use of CSMP allows the user considerable flexibility in modifying the models employed

76 FR 76146 - Large Power Transformers From the Republic of Korea: Postponement of Preliminary Determination of...

Science.gov (United States)

2011-12-06

... DEPARTMENT OF COMMERCE International Trade Administration [A-580-867] Large Power Transformers... initiation of the antidumping duty investigation of large power transformers from the Republic of Korea (Korea). See Large Power Transformers from the Republic of Korea: Initiation of Antidumping Duty...

International legal framework for geoengineering: Managing the risks of an emerging technology

NARCIS (Netherlands)

Du, Haomiao

2016-01-01

The present book “International Legal Framework for Geoengineering – Managing the Risks of an Emerging Technology” is about international law and an emerging technology called geoengineering, which refers to the large-scale manipulation of the planetary environment for counteracting anthropogenic

International Masterclass at CMS

CERN Multimedia

Lapka, M

2012-01-01

The CMS collaboration welcomed a class of French high school students to the CERN facility in Meyrin, Switzerland on the 12 of March, 2012. Students spent the day meeting with physicists, hearing talks, asking questions, and participating in a hands-on exercise using real data collected by the CMS experiment on the Large Hadron Colider. Talks and other resources are available here: http://ippog-dev.web.cern.ch/resources/2012/ippog-international-masterclass-2012-cms

Thermodynamic consequences of sodium spray fires in closed containments. Pt. 1

International Nuclear Information System (INIS)

Cherdron, W.

1985-06-01

With respect to core disruptive accidents in LMFBR's liquid sodium might be sprayed with high pressure through the head of the tank into oxygen-containing atmosphere. A series of large spray fire experiments has been performed under accident conditions in the FAUNA facility of LAF I in the KfK. The experimental results showed that the overpressure did not exceed 1.8 bar at the experiment, spraying 60 kg Na in 1.5 seconds. (orig.) [de

Deep Learning: Enriching Teacher Training through Mobile Technology and International Collaboration

Science.gov (United States)

Naylor, Amanda; Gibbs, Janet

2018-01-01

This article presents results from an international collaboration between college students and pre-service teachers in Norway and the UK. This research is part of a large, international project exploring and developing the interrelationship between mobile technology and teachers' perceptions of teaching and learning. Data was collected for this…

Trends in large-scale testing of reactor structures

International Nuclear Information System (INIS)

Blejwas, T.E.

2003-01-01

Large-scale tests of reactor structures have been conducted at Sandia National Laboratories since the late 1970s. This paper describes a number of different large-scale impact tests, pressurization tests of models of containment structures, and thermal-pressure tests of models of reactor pressure vessels. The advantages of large-scale testing are evident, but cost, in particular limits its use. As computer models have grown in size, such as number of degrees of freedom, the advent of computer graphics has made possible very realistic representation of results - results that may not accurately represent reality. A necessary condition to avoiding this pitfall is the validation of the analytical methods and underlying physical representations. Ironically, the immensely larger computer models sometimes increase the need for large-scale testing, because the modeling is applied to increasing more complex structural systems and/or more complex physical phenomena. Unfortunately, the cost of large-scale tests is a disadvantage that will likely severely limit similar testing in the future. International collaborations may provide the best mechanism for funding future programs with large-scale tests. (author)

Dynamics of International Reserve Accumulation in Turkish Economy

Directory of Open Access Journals (Sweden)

Duygu Ayhan

2015-05-01

Full Text Available Many of the emerging market economies embody macroeconomic and structural vulnerabilities due to large deficits, high inflation, slowing growth and heavy reliance on short-term capital inflows. Therefore, accumulation of international reserve holdings has been frequently used by authorities to serve as an insurance against the volatility of the capital flows and strengthen the fragile nature of these economies. Turkish economy, classified as one of the most fragile of the emerging economies, has been experiencing a similar process of international reserve accumulation. The chronically high current account deficit and low savings rate boost the importance of international reserves. Thus, the aim of this paper is to investigate the determinants of international reserves in Turkey. The dataset covers the 2000-2013 period. Consequently, we find that the international reserve accumulation is mainly explained by current account balance, per capita income and past crisis experience.

Diffeomorphic Iterative Centroid Methods for Template Estimation on Large Datasets

OpenAIRE

Cury , Claire; Glaunès , Joan Alexis; Colliot , Olivier

2014-01-01

International audience; A common approach for analysis of anatomical variability relies on the stimation of a template representative of the population. The Large Deformation Diffeomorphic Metric Mapping is an attractive framework for that purpose. However, template estimation using LDDMM is computationally expensive, which is a limitation for the study of large datasets. This paper presents an iterative method which quickly provides a centroid of the population in the shape space. This centr...

15th International Conference on Accelerator and Large Experimental Physics Control Systems

CERN Document Server

2015-01-01

ICALEPCS is a biennial series of conferences that is intended to: * Provide a forum for the interchange of ideas and information between control system specialists working on large experimental physics facilities around the world (accelerators, particle detectors, fusion reactors, telescopes, etc.); * Create an archival literature of developments and progress in this rapidly changing discipline; * Promote, where practical, standardization in both hardware and software; Promote collaboration between laboratories, institutes and industry.

A large-scale international meta-analysis of paraoxonase gene polymorphisms in sporadic ALS

NARCIS (Netherlands)

Wills, A-M.; Cronin, S.; Slowik, A.; Kasperaviciute, D.; Van Es, M. A.; Morahan, J. M.; Valdmanis, P. N.; Meininger, V.; Melki, J.; Shaw, C. E.; Rouleau, G. A.; Fisher, E. M. C.; Shaw, P. J.; Morrison, K. E.; Pamphlett, R.; Van den Berg, L. H.; Figlewicz, D. A.; Andersen, P. M.; Al-Chalabi, A.; Hardiman, O.; Purcell, S.; Landers, J. E.; Brown, R. H.

2009-01-01

Background: Six candidate gene studies report a genetic association of DNA variants within the paraoxonase locus with sporadic amyotrophic lateral sclerosis (ALS). However, several other large studies, including five genome-wide association studies, have not duplicated this finding. Methods: We

Student Self-Formation in International Education

Science.gov (United States)

Marginson, Simon

2014-01-01

In research in cross-cultural psychology, international education is largely understood as an "adjustment" to host country norms and institutions, a notion that prioritizes social order and stability. The student is seen as in deficit in relation to these norms. The student's home country identity becomes seen as a barrier to be broken…

Understanding large social-ecological systems: introducing the SESMAD project

Directory of Open Access Journals (Sweden)

Michael Cox

2014-08-01

Full Text Available This article introduces the Social-ecological systems meta-analysis database (SESMAD project, which is the project behind the case studies and synthetic articles contained in this special issue of the International Journal of the Commons. SESMAD is an internationally collaborative meta-analysis project that builds on previous seminally synthetic work on small-scale common-pool resource systems conducted at the Workshop in Political Theory and Policy Analysis at Indiana University. This project is guided by the following research question: can the variables found to be important in explaining outcomes on small-scale systems be scaled up to explain outcomes in large-scale environmental governance? In this special issue we report on our findings thus far through a set of case studies of large-scale environmental governance, a paper that describes our conceptual advances, and a paper that compares these five case studies to further examine our central research question.

Constructing Organizational Identity on Internal Social Media

DEFF Research Database (Denmark)

Madsen, Vibeke Thøis

2016-01-01

This study explored how coworkers use internal social media (ISM) to contribute to the construction of organizational identity. The study analyzed 3 months of interactions among coworkers at a large Danish bank on ISM. In addition, 17 coworkers were interviewed to provide additional understanding...

Large N saddle formulation of quadratic building block theories

International Nuclear Information System (INIS)

Halpern, M.B.

1980-01-01

I develop a large N saddle point formulation for the broad class of 'theories of quadratic building blocks'. Such theories are those on which the sums over internal indices are contained in quadratic building blocks, e.g. PHI 2 = Σsup(N)sub(a-1)PHi sup(a)sup(a). The formulation applies as well to fermions, derivative coupling and non-polynomial interactions. In a related development, closed Schwinger-Dyson equations for Green functions of the building blocks are derived and solved for large N. (orig.)

Enresa International Cooperation

International Nuclear Information System (INIS)

Rodriguez Beceiro, A.

1998-01-01

The Empresa Nacional de Residuos Radiactivos, S.A. (ENRESA) was set up in 1984 with the mandate to undertake responsibility for radioactive waste management in Spain. From the very beginning, ENRESA was fully aware of the fact that international cooperation plays a very important role in the development of national programmes. Aspects such as the setting up of international databases, the development and validation of models or site characterization technique such enormous efforts and amounts of resources that they could hardly be undertaken individually. Furthermore, joint participation in research, development and demonstration projects reinforces the level of confidence, not only in the decision-making process but also in the technologies, techniques and practices used. ENRESA's participation in the international contexts is largely defined, on the one hand, by the needs arising from its technical programme, as reflected in the General Radioactive Waste Plan and in the Research and Development Plan, and on the other by the need to support spanish governmental institutions in their participation in inter-governmental institutions in their participation in inter-governmental forums. The formula for cooperation varies according to needs, this cooperation generally being accomplished by means of bilateral agreements with other institutions having similar competence or by participating in the programmes of inter-governmental organizations. In particular, ENRESA has reached cooperation agreements with most of the agencies with similar responsibilities in other countries and participates very actively in the programmes of the European Union, the Nuclear energy Agency (NEA/OECD) and the International Atomic Energy Agency (IAEA). (Author)

Using a gel/plastic surrogate to study the biomechanical response of the head under air shock loading: a combined experimental and numerical investigation.

Science.gov (United States)

Zhu, Feng; Wagner, Christina; Dal Cengio Leonardi, Alessandra; Jin, Xin; Vandevord, Pamela; Chou, Clifford; Yang, King H; King, Albert I

2012-03-01

A combined experimental and numerical study was conducted to determine a method to elucidate the biomechanical response of a head surrogate physical model under air shock loading. In the physical experiments, a gel-filled egg-shaped skull/brain surrogate was exposed to blast overpressure in a shock tube environment, and static pressures within the shock tube and the surrogate were recorded throughout the event. A numerical model of the shock tube was developed using the Eulerian approach and validated against experimental data. An arbitrary Lagrangian-Eulerian (ALE) fluid-structure coupling algorithm was then utilized to simulate the interaction of the shock wave and the head surrogate. After model validation, a comprehensive series of parametric studies was carried out on the egg-shaped surrogate FE model to assess the effect of several key factors, such as the elastic modulus of the shell, bulk modulus of the core, head orientation, and internal sensor location, on pressure and strain responses. Results indicate that increasing the elastic modulus of the shell within the range simulated in this study led to considerable rise of the overpressures. Varying the bulk modulus of the core from 0.5 to 2.0 GPa, the overpressure had an increase of 7.2%. The curvature of the surface facing the shock wave significantly affected both the peak positive and negative pressures. Simulations of the head surrogate with the blunt end facing the advancing shock front had a higher pressure compared to the simulations with the pointed end facing the shock front. The influence of an opening (possibly mimicking anatomical apertures) on the peak pressures was evaluated using a surrogate head with a hole on the shell of the blunt end. It was revealed that the presence of the opening had little influence on the positive pressures but could affect the negative pressure evidently.

Decoupling local mechanics from large-scale structure in modular metamaterials

Science.gov (United States)

Yang, Nan; Silverberg, Jesse L.

2017-04-01

A defining feature of mechanical metamaterials is that their properties are determined by the organization of internal structure instead of the raw fabrication materials. This shift of attention to engineering internal degrees of freedom has coaxed relatively simple materials into exhibiting a wide range of remarkable mechanical properties. For practical applications to be realized, however, this nascent understanding of metamaterial design must be translated into a capacity for engineering large-scale structures with prescribed mechanical functionality. Thus, the challenge is to systematically map desired functionality of large-scale structures backward into a design scheme while using finite parameter domains. Such “inverse design” is often complicated by the deep coupling between large-scale structure and local mechanical function, which limits the available design space. Here, we introduce a design strategy for constructing 1D, 2D, and 3D mechanical metamaterials inspired by modular origami and kirigami. Our approach is to assemble a number of modules into a voxelized large-scale structure, where the module’s design has a greater number of mechanical design parameters than the number of constraints imposed by bulk assembly. This inequality allows each voxel in the bulk structure to be uniquely assigned mechanical properties independent from its ability to connect and deform with its neighbors. In studying specific examples of large-scale metamaterial structures we show that a decoupling of global structure from local mechanical function allows for a variety of mechanically and topologically complex designs.

Large-scale networks in engineering and life sciences

CERN Document Server

Findeisen, Rolf; Flockerzi, Dietrich; Reichl, Udo; Sundmacher, Kai

2014-01-01

This edited volume provides insights into and tools for the modeling, analysis, optimization, and control of large-scale networks in the life sciences and in engineering. Large-scale systems are often the result of networked interactions between a large number of subsystems, and their analysis and control are becoming increasingly important. The chapters of this book present the basic concepts and theoretical foundations of network theory and discuss its applications in different scientific areas such as biochemical reactions, chemical production processes, systems biology, electrical circuits, and mobile agents. The aim is to identify common concepts, to understand the underlying mathematical ideas, and to inspire discussions across the borders of the various disciplines.  The book originates from the interdisciplinary summer school “Large Scale Networks in Engineering and Life Sciences” hosted by the International Max Planck Research School Magdeburg, September 26-30, 2011, and will therefore be of int...

78 FR 41366 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 4 1/2

Science.gov (United States)

2013-07-10

... DEPARTMENT OF COMMERCE International Trade Administration [A-588-850] Certain Large Diameter... Operations, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce... Results of Antidumping Duty Administrative Review; 2011-2012 AGENCY: Import Administration, International...

IS THE INTERNATIONAL BUSINESS ENVIRONMENT THE ACTUAL CONTEXT FOR INTERNATIONAL BUSINESS RESEARCH?

Directory of Open Access Journals (Sweden)

Fernando A. Ribeiro Serra

2009-07-01

Full Text Available The International Business Environment (IBE has been argued to be the essential context for international business (IB studies and the distinguishing factor from other management studies and studies of large enterprises. Two content analysis show that many papers published in top tier IB journals either lack reference to any dimension of the IBE or tend to be uni-or bi-dimensional when addressing the IBE; it is not a surprise that the cultural dimension is the most often used. We suggest that: (a there is need to developed more uni-and multi-dimensional environmental constructs; (ba more holistic view of the IBE provides richer insights on the actual complexity underlying IB research. Future studiesthat provide more comprehensive models of the IBE that overcome the usual broad classifications of the internationalenvironment as undefined and uncontrollable factors are warranted to advance conceptual and empirical research.

Informational support of the investment process in a large city economy

Directory of Open Access Journals (Sweden)

Tamara Zurabovna Chargazia

2016-12-01

Full Text Available Large cities possess a sufficient potential to participate in the investment processes both at the national and international levels. A potential investor’s awareness of the possibilities and prospects of a city development is of a great importance for him or her to make a decision. So, providing a potential investor with relevant, laconic and reliable information, the local authorities increase the intensity of the investment process in the city economy and vice-versa. As a hypothesis, there is a proposition that a large city administration can sufficiently activate the investment processes in the economy of a corresponding territorial entity using the tools of the information providing. The purpose of this article is to develop measures for the improvement of the investment portal of a large city as an important instrument of the information providing, which will make it possible to brisk up the investment processes at the level under analysis. The reasons of the unsatisfactory information providing on the investment process in a large city economy are deeply analyzed; the national and international experience in this sphere is studied; advantages and disadvantages of the information providing of the investment process in the economy of the city of Makeyevka are considered; the investment portals of different cities are compared. There are suggested technical approaches for improving the investment portal of a large city. The research results can be used to improve the investment policy of large cities.

Formation and mechanism of the abnormal pressure zone and its relation to oil and gas accumulations in the Eastern Jiuquan Basin, northwest China

Institute of Scientific and Technical Information of China (English)

陈建平; 黄第藩

1996-01-01

Three abnormal overpressure zoes with a planar top at different depths occur in the Ying’er Depression in the Eastern Jiuquan Basin. The distance and the temperature difference between them are about 1 000 m and 30℃, respectively. The studies of sedimentary history, nature of formation water, variation of geothermal gradient and examination of thin sections, and the relationship between lithologic section and formation pressure show that there are conditions for formation of abnormal overpressure zones in the Ying’er Depression. Aquathermal pressuring and the overlying sediment load are main factors forming the abnormal overpressure zones. The study indicates that most of oil and gas in the Ying’er Depression accumulated in reservoirs above or under the seals or in the top of the compartments.

Understanding Internal Capital Markets and Corporate Policies

NARCIS (Netherlands)

Cremers, M.; Huang, R.; Sautner, Z.

2009-01-01

This study looks inside a large retail-banking group to understand how corporate politics affect internal capital allocation. The group consists of a headquarters organization and about 150 member banks which own the headquarters. Our data is from the firm’s managerial accounting system and covers

Sources of International Courts' Legitimacy: A comparative study

DEFF Research Database (Denmark)

Godzimirska, Zuzanna; Creamer, Cosette

Despite ample scholarship on the legitimacy of international legal institutions, existing studies on international courts (ICs) tend to adopt normative or deductive approaches to specify their legitimacy and assess its effects. Very few adopt empirical or inductive approaches and examine the reas......Despite ample scholarship on the legitimacy of international legal institutions, existing studies on international courts (ICs) tend to adopt normative or deductive approaches to specify their legitimacy and assess its effects. Very few adopt empirical or inductive approaches and examine...... of supply-side factors— the features, roles and practices of a court—in assessing its legitimacy, we argue that demand-side factors—namely the characteristics of the evaluating state—also largely determine the sources of an IC’s legitimacy. To support and illustrate this argument, we examine statements...... of members on the operation of three ICs with different institutional designs and roles: the International Court of Justice, the International Criminal Court, and the Appellate Body of the World Trade Organization. We employ supervised learning methods of text classification to identify statements...

The international uranium market - structure and outlook

International Nuclear Information System (INIS)

Noreng, Oe.

1978-01-01

It is pointed out that the international uranium market is immature and is subject to factors of a political, rather than economic nature. This is due largely to potential military exploitation, which has led USA, Canada and Australia to adopt a restrictive export policy. South Africa and France, on the other hand have a more liberal attitude. The history of the market, and the development of U308 prices are then discussed and related to the phases in the commercial exploitation of nuclear power. The present market structure is described, both international and within Canada, USA, Australia, South Africa and France. The future demand is then discussed, assuming three levels of demand and various price categories. It is shown that the demand will be only slightly influenced by moderate to large increases in price, assuming price rises for coal and oil. It is concluded that the price can rise to $400-500/pound U308. (JIW)

Analyzing Internal Fragmentation of Electrosprayed Ubiquitin Ions During Beam-Type Collisional Dissociation

Science.gov (United States)

Durbin, Kenneth R.; Skinner, Owen S.; Fellers, Ryan T.; Kelleher, Neil L.

2015-05-01

Gaseous fragmentation of intact proteins is multifaceted and can be unpredictable by current theories in the field. Contributing to the complexity is the multitude of precursor ion states and fragmentation channels. Terminal fragment ions can be re-fragmented, yielding product ions containing neither terminus, termed internal fragment ions. In an effort to better understand and capitalize upon this fragmentation process, we collisionally dissociated the high (13+), middle (10+), and low (7+) charge states of electrosprayed ubiquitin ions. Both terminal and internal fragmentation processes were quantified through step-wise increases of voltage potential in the collision cell. An isotope fitting algorithm matched observed product ions to theoretical terminal and internal fragment ions. At optimal energies for internal fragmentation of the 10+, nearly 200 internal fragments were observed; on average each of the 76 residues in ubiquitin was covered by 24.1 internal fragments. A pertinent finding was that formation of internal ions occurs at similar energy thresholds as terminal b- and y-ion types in beam-type activation. This large amount of internal fragmentation is frequently overlooked during top-down mass spectrometry. As such, we present several new approaches to visualize internal fragments through modified graphical fragment maps. With the presented advances of internal fragment ion accounting and visualization, the total percentage of matched fragment ions increased from approximately 40% to over 75% in a typical beam-type MS/MS spectrum. These sequence coverage improvements offer greater characterization potential for whole proteins with no needed experimental changes and could be of large benefit for future high-throughput intact protein analysis.

Design and construction of a large-scale sand-bentonite seal for controlled gas release from a L/ILW repository - The GAST project at GTS

International Nuclear Information System (INIS)

Rueedi, J.; Marschall, P.; Vaissiere, R. de la; Jung, H.; Reinhold, M.; Steiner, P.; Garcia-Sineriz, J.L.

2012-01-01

Document available in extended abstract form only. Gases (hydrogen, methane, carbon dioxide) may accumulate in the emplacement caverns of a geological repository for low/intermediate-level waste (L/ILW) due to the corrosion and degradation of the wastes. Nagra is evaluating the concept of an engineered gas transport system (EGTS), aimed at limiting the gas overpressures in the backfilled underground structures of a repository on an acceptable level without compromising the radionuclide retention capacity of the engineered barrier system (EBS). The main design elements of the EGTS are (i) specially designed backfill materials for the emplacement caverns, characterized by high porosity and high compressive strength and (ii) gas permeable tunnel seals, consisting of sand/bentonite mixtures with a bentonite content of 20% to 30%. Preliminary experimental studies on the laboratory scale confirmed the low water permeability and the enhanced gas transport capacity of the S/B mixtures. These experiments have shown the ability to design S/B mixtures with specific target permeabilities for water and gas flow. Complementary numerical studies were conducted with two-phase flow modeling codes to simulate the buildup of gas overpressures in the different sections of the repository. The modeling studies reveal a variety of gas related design optimizations, indicating that the gas overpressures in the underground structures can be limited to a level which conforms to the long-term safety requirements. Thus, the seal geometry (length, cross-sectional area) can be subjected to the optimization process just as the geotechnical properties of the backfill material (gas / water permeability, clay content, compressive strength). In this context, it is expected that material heterogeneities at engineering scales will, at least to some extent, lead to a water saturation and a gas invasion behaviour that differs from those observed in small-scale lab experiments. Therefore, validation

Self-Segregation or Global Mixing?: Social Interactions and the International Student Experience

Science.gov (United States)

Rose-Redwood, CindyAnn R.; Rose-Redwood, Reuben S.

2013-01-01

This qualitative study examines the social interaction patterns among international students at a large research university in the Mid-Atlantic region of the United States. Based on semistructured interviews with 60 international graduate students, the researchers provide a conceptual framework that identifies 4 primary types of social…

Maternal underweight and obesity and risk of orofacial clefts in a large international consortium of population-based studies.

Science.gov (United States)

Kutbi, Hebah; Wehby, George L; Moreno Uribe, Lina M; Romitti, Paul A; Carmichael, Suzan; Shaw, Gary M; Olshan, Andrew F; DeRoo, Lisa; Rasmussen, Sonja A; Murray, Jeffrey C; Wilcox, Allen; Lie, Rolv T; Munger, Ronald G

2017-02-01

Evidence on association of maternal pre-pregnancy weight with risk of orofacial clefts is inconsistent. Six large case-control studies of orofacial clefts from Northern Europe and the USA were included in analyses pooling individual-level data. Cases included 4943 mothers of children with orofacial clefts (cleft lip only: 1135, cleft palate with cleft lip: 2081, cleft palate only: 1727) and controls included 10 592 mothers of unaffected children. Association of orofacial cleft risk with pre-pregnancy maternal weight classified by level of body mass index (BMI, kg/m 2 ) was evaluated using logistic regression adjusting for multiple covariates. Cleft palate, both alone and with cleft lip (CP+/-CL), was associated with maternal class II+ pre-pregnancy obesity (≥ 35)compared with normal weight [adjusted odds ratio (aOR) = 1.36; 95% confidence interval (CI) = 1.16, 1.58]. CP+/-CL was marginally associated with maternal underweight (aOR = 1.16; 95% CI = 0.98, 1.36). Cleft lip alone was not associated with BMI. In this largest population-based study to date, we found an increased risk of cleft palate, with or without cleft lip, in class II+ obese mothers compared with normal-weight mothers; underweight mothers may also have an increased risk, but this requires further study. These results also suggest that extremes of weight may have a specific effect on palatal development. © The Author 2016; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association

Folding and unfolding of large-size shell construction for application in Earth orbit

Science.gov (United States)

Kondyurin, Alexey; Pestrenina, Irena; Pestrenin, Valery; Rusakov, Sergey

2016-07-01

A future exploration of space requires a technology of large module for biological, technological, logistic and other applications in Earth orbits [1-3]. This report describes the possibility of using large-sized shell structures deployable in space. Structure is delivered to the orbit in the spaceship container. The shell is folded for the transportation. The shell material is either rigid plastic or multilayer prepreg comprising rigid reinforcements (such as reinforcing fibers). The unfolding process (bringing a construction to the unfolded state by loading the internal pressure) needs be considered at the presence of both stretching and bending deformations. An analysis of the deployment conditions (the minimum internal pressure bringing a construction from the folded state to the unfolded state) of large laminated CFRP shell structures is formulated in this report. Solution of this mechanics of deformable solids (MDS) problem of the shell structure is based on the following assumptions: the shell is made of components whose median surface has a reamer; in the separate structural element relaxed state (not stressed and not deformed) its median surface coincides with its reamer (this assumption allows choose the relaxed state of the structure correctly); structural elements are joined (sewn together) by a seam that does not resist rotation around the tangent to the seam line. The ways of large shell structures folding, whose median surface has a reamer, are suggested. Unfolding of cylindrical, conical (full and truncated cones), and large-size composite shells (cylinder-cones, cones-cones) is considered. These results show that the unfolding pressure of such large-size structures (0.01-0.2 atm.) is comparable to the deploying pressure of pneumatic parts (0.001-0.1 atm.) [3]. It would be possible to extend this approach to investigate the unfolding process of large-sized shells with ruled median surface or for non-developable surfaces. This research was

Search Results | Page 827 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

2001-01-01

Results 8261 - 8270 of 8491 ... The international community faces no more critical issue currently than how to protect people caught in new and large-scale humanitarian crises — humanitarian intervention has been controversial both when it has happened, as in Kosovo, and when it. Publication Date. January 1, 2001.

The HST Large Programme on ω Centauri. II. Internal Kinematics

Science.gov (United States)

Bellini, Andrea; Libralato, Mattia; Bedin, Luigi R.; Milone, Antonino P.; van der Marel, Roeland P.; Anderson, Jay; Apai, Dániel; Burgasser, Adam J.; Marino, Anna F.; Rees, Jon M.

2018-01-01

In this second installment of the series, we look at the internal kinematics of the multiple stellar populations of the globular cluster ω Centauri in one of the parallel Hubble Space Telescope (HST) fields, located at about 3.5 half-light radii from the center of the cluster. Thanks to the over 15 yr long baseline and the exquisite astrometric precision of the HST cameras, well-measured stars in our proper-motion catalog have errors as low as ∼10 μas yr‑1, and the catalog itself extends to near the hydrogen-burning limit of the cluster. We show that second-generation (2G) stars are significantly more radially anisotropic than first-generation (1G) stars. The latter are instead consistent with an isotropic velocity distribution. In addition, 1G stars have excess systemic rotation in the plane of the sky with respect to 2G stars. We show that the six populations below the main-sequence (MS) knee identified in our first paper are associated with the five main population groups recently isolated on the upper MS in the core of cluster. Furthermore, we find both 1G and 2G stars in the field to be far from being in energy equipartition, with {η }1{{G}}=-0.007+/- 0.026 for the former and {η }2{{G}}=0.074+/- 0.029 for the latter, where η is defined so that the velocity dispersion {σ }μ scales with stellar mass as {σ }μ \\propto {m}-η . The kinematical differences reported here can help constrain the formation mechanisms for the multiple stellar populations in ω Centauri and other globular clusters. We make our astro-photometric catalog publicly available.

Development of glia and blood vessels in the internal capsule of rats.

Science.gov (United States)

Earle, K L; Mitrofanis, J

1998-02-01

We have explored two aspects of internal capsule development that have not been described previously, namely, the development of glia and of blood vessels. To these ends, we used antibodies to glial fibrillary acidic protein (GFAP) and to vimentin (to identify astrocytes and to radial glia) and Griffonia simplicifolia (lectin; to identify microglia and blood vessels). Further, we made intracardiac injections of Evans Blue to examine the permeability of this dye in the vessels of the internal capsule during neonatal development. Our results show that large numbers of radial glia, astrocytes and microglia are not labelled with these markers in the white matter of the internal capsule until about birth; very few are labelled earlier, during the critical stages of corticofugal and corticopetal axonal ingrowth (E15-E20). The large glial labelling in the internal capsule at birth is accompanied by a dense vascular innervation of the capsule; as with the glia, very few labelled patent vessels are seen earlier. After intracardiac injections of Evans Blue, we find that the blood vessels of the internal capsule are not particularly permeable to Evans Blue. At each age examined (P0, P5, P15), blood vessels are outlined very clearly and there is no diffuse haze of fluorescence within the extracellular space, which is indicative of a leaky vessel. There are three striking differences between the glial environment of the internal capsule and that of the adjacent thalamus. First, the internal capsule is never rich with radial glial fibres (vimentin- and GFAP-immunoreactive) during development (except at P0), whereas the thalamus has many radial fibres from very early development (E15-E17). Second, astrocytes (vimentin- and GFAP-immunoreactive) first become apparent in the internal capsule (E20-P0) well before they do in the thalamus (P15). Third, the internal capsule houses a large transient population of amoeboid microglia (P0-P22), whereas the thalamus does not; only ramified

India's energy needs and areas of international cooperation

Energy Technology Data Exchange (ETDEWEB)

Wazir, S.N.

1980-03-15

India's energy position is poor because of relatively large imports of oil, and poor reserves. In the impending energy crisis, developing countries will suffer (whether or not it is oil-rich) unless international cooperation is forthcoming. Energy consumption patterns in India are shown in tables. Energy reserves are also analyzed, including nonconventional sources (geothermal, solar, etc.). Possible areas for international cooperation are explored. (DLC)

Dust devil dynamics in the internal vortex region

International Nuclear Information System (INIS)

Onishchenko, O G; Pokhotelov, O A; Horton, W

2015-01-01

A hydrodynamic model for dust devil dynamics in the internal vortex region is analyzed. It is shown that the results concerning the growing plumes investigated by Onishchenko et al (2014) for the short time domain can be applied to the study of vortex motion in the internal region for longer times. It is demonstrated that these convective plumes in an atmosphere with weak, large-scale toroidal motion inhomogeneity in the vertical direction can be a subject for further exponential growth over time. (invited comment)

Linearization-based method for solving a multicomponent diffusion phase-field model with arbitrary solution thermodynamics

Science.gov (United States)

Welland, M. J.; Tenuta, E.; Prudil, A. A.

2017-06-01

This article describes a phase-field model for an isothermal multicomponent, multiphase system which avoids implicit interfacial energy contributions by starting from a grand potential formulation. A method is developed for incorporating arbitrary forms of the equilibrium thermodynamic potentials in all phases to determine an explicit relationship between chemical potentials and species concentrations. The model incorporates variable densities between adjacent phases, defect migration, and dependence of internal pressure on object dimensions ranging from the macro- to nanoscale. A demonstrative simulation of an overpressurized nanoscopic intragranular bubble in nuclear fuel migrating to a grain boundary under kinetically limited vacancy diffusion is shown.

Internal quality evolution of a large test system – an industrial study

Directory of Open Access Journals (Sweden)

Kovács Attila

2016-12-01

Full Text Available This paper presents our empirical observations related to the evolution of a large automated test system. The system observed is used in the industry as a test tool for complex telecommunication systems, itself consisting of more than one million lines of source code. This study evaluates how different changes during the development have changed the number of observed Code Smells in the test system. We have monitored the development of the test scripts and measured the code quality characteristics over a five years period.

Relationships Between Internal and External Match-Load Indicators in Soccer Match Officials.

Science.gov (United States)

Castillo, Daniel; Weston, Matthew; McLaren, Shaun J; Cámara, Jesús; Yanci, Javier

2017-08-01

The aims of this study were to describe the internal and external match loads (ML) of refereeing activity during official soccer matches and to investigate the relationship among the methods of ML quantification across a competitive season. A further aim was to examine the usefulness of differential perceived exertion (dRPE) as a tool for monitoring internal ML in soccer referees. Twenty field referees (FRs) and 43 assistant referees (ARs) participated in the study. Data were collected from 30 competitive matches (FR = 20 observations, AR = 43 observations) and included measures of internal (Edwards' heart-rate-derived training impulse [TRIMP EDW ]) ML, external (total distance covered, distance covered at high speeds, and player load) ML, and ML differentiated ratings of perceived respiratory (sRPE res ) and leg-muscle (sRPE mus ) exertion. Internal and external ML were all greater for FRs than for ARs (-19.7 to -72.5), with differences ranging from very likely very large to most likely extremely large. The relationships between internal-ML and external-ML indicators were, in most cases, unclear for FR (r internal and external ML. Moreover, dRPE represents distinct dimensions of effort and may be useful in monitoring soccer referees' ML during official matches.

Attenuation of blast pressure behind ballistic protective vests.

Science.gov (United States)

Wood, Garrett W; Panzer, Matthew B; Shridharani, Jay K; Matthews, Kyle A; Capehart, Bruce P; Myers, Barry S; Bass, Cameron R

2013-02-01

Clinical studies increasingly report brain injury and not pulmonary injury following blast exposures, despite the increased frequency of exposure to explosive devices. The goal of this study was to determine the effect of personal body armour use on the potential for primary blast injury and to determine the risk of brain and pulmonary injury following a blast and its impact on the clinical care of patients with a history of blast exposure. A shock tube was used to generate blast overpressures on soft ballistic protective vests (NIJ Level-2) and hard protective vests (NIJ Level-4) while overpressure was recorded behind the vest. Both types of vest were found to significantly decrease pulmonary injury risk following a blast for a wide range of conditions. At the highest tested blast overpressure, the soft vest decreased the behind armour overpressure by a factor of 14.2, and the hard vest decreased behind armour overpressure by a factor of 56.8. Addition of body armour increased the 50th percentile pulmonary death tolerance of both vests to higher levels than the 50th percentile for brain injury. These results suggest that ballistic protective body armour vests, especially hard body armour plates, provide substantial chest protection in primary blasts and explain the increased frequency of head injuries, without the presence of pulmonary injuries, in protected subjects reporting a history of blast exposure. These results suggest increased clinical suspicion for mild to severe brain injury is warranted in persons wearing body armour exposed to a blast with or without pulmonary injury.

Close-in airblast from underground explosions

Energy Technology Data Exchange (ETDEWEB)

Vortman, L J [Sandia Laboratories, Albuquerque, NM (United States)

1970-05-15

Air overpressures as a function of time have been measured from surface zero to about 170 ft/lb{sup 1/3} along the ground from nuclear and chemical explosions. Charge depths varied from the surface to depths below which explosion gases are contained. A ground-shock-induced air pressure pulse is clearly distinguishable from the pulse caused by venting gases. Measured peak overpressures show reasonable agreement with the theoretical treatment by Monta. In a given medium the suppression of blast with explosion burial depth is a function of the relative distance at which the blast is observed. Rates of suppression of peak overpressure with charge burial are different for the two pulses. Rates are determined for each pulse over the range of distances at which measurements have been made of air overpressure from chemical explosions in several media. Nuclear data are available from too few shots for similar dependence on burial depth and distance to be developed, but it is clear that the gas venting peak overpressure from nuclear explosions is much more dependent on medium than that from chemical explosions. For above-ground explosions, experiment has shown that airblast from a I-kiloton nuclear explosion is equal to that from a 0.5-kiloton TNT explosion. Data on ground-shock-induced airblast is now sufficient to show that a similar relationship may exist for buried explosions. Because of medium dependence of the gas venting pulse from nuclear explosions, data from additional nuclear events will be required before a chemical/nuclear airblast equivalence can be determined for the gas-venting pulse. (author)

International differences in wage and nonwage labor costs

OpenAIRE

Riveros, Luis A.

1989-01-01

The ratio of nonwage labor costs (for social security, pensions, vacation days, severence compensation, and the like) to direct wage costs is proportionately higher in Europe and Latin America than in Asia and Africa - largely because workers there are protected more by regulations. The distortionary growth of labor costs because of increasing nonwage costs is not common in the LDCs however. The author of this paper found that international differences in labor costs are attributable largely ...

Living large: the experiences of large-bodied women when accessing general practice services

Directory of Open Access Journals (Sweden)

Russell N

2013-09-01

Full Text Available INTRODUCTION: Numerous studies report high levels of stigma and discrimination experienced by obese/overweight women within the health care system and society at large. Despite general practice being the most utilised point of access for health care services, there is very little international or national exploration of the experiences of large-bodied women (LBW accessing these services. The aim of this study was to explore LBW's experiences of accessing general practice services in New Zealand. METHODS: This is a qualitative, descriptive, feminist study. Local advertising for participants resulted in eight self-identified, large-bodied women being interviewed. A post-structural feminist lens was applied to the data during thematic analysis. FINDINGS: The women in this study provided examples of verbal insults, inappropriate humour, negative body language, unmet health care needs and breaches of dignity from health care providers in general practice. Seven themes were identified: early experiences of body perception, confronting social stereotypes, contending with feminine beauty ideals, perceptions of health, pursuing health, respecting the whole person, and feeling safe to access care. CONCLUSION: Pressure for body size vigilance has, in effect, excluded the women in this study from the very locations of health that they are 'encouraged' to attend-including socialising and exercising in public, screening opportunities that require bodily exposure, and accessing first point of care health services.

Friction and Lubrication of Large Tilting-Pad Thrust Bearings

Directory of Open Access Journals (Sweden)

Michał Wasilczuk

2015-04-01

Full Text Available Fluid film bearings have been extensively used in the industry because of their unbeatable durability and extremely low friction coefficient, despite a very low coefficient of friction dissipation of energy being noticeable, especially in large bearings. Lubricating systems of large tilting pad thrust bearings utilized in large, vertical shaft hydrogenerators are presented in this paper. A large amount of heat is generated due to viscous shearing of the lubricant large tilting pad thrust bearings, and this requires systems for forced cooling of the lubricant. In the dominant bath lubrication systems, cooling is realized by internal coolers or external cooling systems, with the latter showing some important advantages at the cost of complexity and also, potentially, lower reliability. Substantial losses in the bearings, reaching 1 MW in extreme cases, are a good motivation for the research and development aimed at reducing them. Some possible methods and their potential efficiency, along with some effects already documented, are also described in the paper.

Sex Differences in Phenotypes of Bicuspid Aortic Valve and Aortopathy: Insights From a Large Multicenter, International Registry.

Science.gov (United States)

Kong, William K F; Regeer, Madelien V; Ng, Arnold C T; McCormack, Louise; Poh, Kian Keong; Yeo, Tiong Cheng; Shanks, Miriam; Parent, Sarah; Enache, Roxana; Popescu, Bogdan A; Yip, James W; Ma, Lawrence; Kamperidis, Vasileios; van der Velde, Enno T; Mertens, Bart; Ajmone Marsan, Nina; Delgado, Victoria; Bax, Jeroen J

2017-03-01

This large multicenter, international bicuspid aortic valve (BAV) registry aimed to define the sex differences in prevalence, valve morphology, dysfunction (aortic stenosis/regurgitation), aortopathy, and complications (endocarditis and aortic dissection). Demographic, clinical, and echocardiographic data at first presentation of 1992 patients with BAV (71.5% men) were retrospectively analyzed. BAV morphology and valve function were assessed; aortopathy configuration was defined as isolated dilatation of the sinus of Valsalva or sinotubular junction, isolated dilatation of the ascending aorta distal to the sinotubular junction, or diffuse dilatation of the aortic root and ascending aorta. New cases of endocarditis and aortic dissection were recorded. There were no significant sex differences regarding BAV morphology and frequency of normal valve function. When presenting with moderate/severe aortic valve dysfunction, men had more frequent aortic regurgitation than women (33.8% versus 22.2%, P <0.001), whereas women were more likely to have aortic stenosis (34.5% versus 44.1%, P <0.001). Men had more frequently isolated dilatation of the sinus of Valsalva or sinotubular junction (14.2% versus 6.7%, P <0.001) and diffuse dilatation of the aortic root and ascending aorta (16.2% versus 7.3%, P <0.001) than women. Endocarditis (4.5% versus 2.5%, P =0.037) and aortic dissections (0.5% versus 0%, P <0.001) occurred more frequently in men. Although there is a male predominance among patients with BAV, men with BAV had more frequently moderate/severe aortic regurgitation at first presentation compared with women, whereas women presented more often with moderate/severe aortic stenosis compared with men. Furthermore, men had more frequent aortopathy than women. © 2017 American Heart Association, Inc.

Medication Errors in an Internal Intensive Care Unit of a Large Teaching Hospital: A Direct Observation Study

Directory of Open Access Journals (Sweden)

Saadat Delfani

2012-06-01

Full Text Available Medication errors account for about 78% of serious medical errors in intensive care unit (ICU. So far no study has been performed in Iran to evaluate all type of possible medication errors in ICU. Therefore the objective of this study was to reveal the frequency, type and consequences of all type of errors in an ICU of a large teaching hospital. The prospective observational study was conducted in an 11 bed internal ICU of a university hospital in Shiraz. In each shift all processes that were performed on one selected patient was observed and recorded by a trained pharmacist. Observer would intervene only if medication error would cause substantial harm. The data was evaluated and then were entered in a form that was designed for this purpose. The study continued for 38 shifts. During this period, a total of 442 errors per 5785 opportunities for errors (7.6% occurred. Of those, there were 9.8% administration errors, 6.8% prescribing errors, 3.3% transcription errors and, 2.3% dispensing errors. Totally 45 interventions were made, 40% of interventions result in the correction of errors. The most common causes of errors were observed to be: rule violations, slip and memory lapses and lack of drug knowledge. According to our results, the rate of errors is alarming and requires implementation of a serious solution. Since our system lacks a well-organize detection and reporting mechanism, there is no means for preventing errors in the first place. Hence, as the first step we must implement a system where errors are routinely detected and reported.

Essence and resolution of international climate negotiation

Directory of Open Access Journals (Sweden)

Xiang-Wan Du

2014-09-01

Full Text Available In essence, international climate negotiation is a serious and responsible global effort, despite various conflicts, to establish a rational international climate regime. In essence, tackling climate changes is leading the globe to actualize sustainable development of all humankind along the low-carbon, green, and cyclic-development path. Thus, climate negotiation should be driving all parties to achieve a global climate regime arrangement in a constructive way. Therefore, this paper suggests focusing on the following three major recommendations: early developed countries take the lead in committing positively to absolute emission reduction; the developing countries contribute according to their abilities and stages of development; the developed countries perform real deeds using their funds and technology. Based on substantial breakthrough that would be made, progressive supplement and improvement could be accomplished through the mechanism of review and adjustment under the Convention framework. This path represents a combination of bottom-up and top-down. The ultimate way out of international climate negotiation lies in win-win cooperation. Profound reasons for China to participate proactively and practically in international climate negotiation, based on its actual conditions, are the internal wants and needs of its scientific and sustainable development, as well as the undertaking of international responsibilities as a responsible, large, developing country.

Sustainable Innovation - Driving Factors in Large Firms

OpenAIRE

Alderin, Clara; Do, Thao

2016-01-01

During recent years, there has been a growing interest in sustainable innovation both in academia and in practice. Our qualitative, multiple case study examines this emerging field in the context of large firms. By doing so, this thesis contributes to the understanding of the concept as well as the underlying factors driving sustainable innovation. Theory highlighted both external and internal factors in firms’ sustainable innovation engagement. The empirical evidence identifies five key fact...

Primary Blast Injury Criteria for Animal/Human TBI Models using Field Validated Shock Tubes

Science.gov (United States)

2017-09-01

acute hemorrhage characterized by partial filling of small groups of alveoli by blood . 240 kPa: Mild multifocal pools of acute hemorrhage which...Neurotrauma, Blast TBI, Primary blast brain injury, Blast overpressure, Blood -brain barrier, Neuroinflammation, Oxidative stress, Neuroproteomics 16...stress, neuroinflammation and BBB damage as a result of blast overpressure in the acute phase (0, 4 and 24 hours post-exposure). Our group

Private Military Contractors, War Crimes and International ...

African Journals Online (AJOL)

The end of the Cold War witnessed the growth and spread of legally established private military contractors (PMCs) playing largely undefined roles in wars, international security and post-conflict reconstruction. The operations of PMCs in Iraq and Afghanistan in the 21st century have been marked by gross human rights ...

Green energy and large commercial users

International Nuclear Information System (INIS)

Capage, Adam

2000-01-01

The difficulties faced in selling green energy to large commercial users are reviewed in this article. Four steps are identified in helping energy service suppliers (ESP) focus on opportunities for maximising revenue, namely, targeting the best prospects, identifying the right contact person, appealing to the primary contact, and helping contacts to make the sale internally. Companies with environmentally conscious customers and well defined environmental policies and led by those that promote environmental stewardship are recognised as commercial customers most likely to sign a deal for green energy

Preliminary H{sub 2} Combustion Analysis in the Containment of APR1400 for SBLOCA Accident using a Multi-Dimensional H{sub 2} Analysis System

Energy Technology Data Exchange (ETDEWEB)

Kang, Hyung Seok; Kim, Jongtae; Kim, Sang-Baik; Hong, Seong-Wan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The COM3D analyze an overpressure buildup resulting from a propagation of hydrogen flame along the structure and wall in the containment using the hydrogen distribution result calculated by the GASFLOW. The MAAP evaluates a hydrogen source during a severe accident and transfer it to the GASFLOW. We performed a hydrogen combustion analysis using the multidimensional hydrogen analysis system for a station blackout (SBO) accident under the assumption of 100% metal-water reaction in the reactor vessel. The COM3D results showed that the pressure buildup was about 250 kPa because the flame speed was not increased above 300 m/s and the pressure wave passed through the open spaces in the large containment. To increase the reliability of the COM3D calculation, it is necessary to perform the hydrogen combustion analysis for another accident such as a small break loss of coolant (SBLOCA). KAERI performed a hydrogen combustion analysis for a SBLOCA accident using the multi-dimensional hydrogen analysis system under the assumption of 100% metal-water reaction in the reactor vessel. From the COM3D results, we can know that the pressure buildup was approximately 310 kPa because the flame speed was not increased above 100 m/s owing to the high steam concentration and low oxygen concentration in the hydrogen distributed region of the containment. The predicted maximum overpressure in the SBLOCA accident is similar to that of the COM3D results for the SBO accident. Thus, we found that the maximum overpressure due to the hydrogen combustion in the containment may depend on the amount of hydrogen mass released from the reactor vessel.

A geochemical and geophysical reappraisal to the significance of the recent unrest at Campi Flegrei caldera (Southern Italy)

Science.gov (United States)

Moretti, Roberto; De Natale, Giuseppe; Troise, Claudia

2017-04-01

Volcanic unrest at calderas involve complex interaction between magma, hydrothermal fluids and crustal stress and strain. Campi Flegrei caldera (CFc), located in the Naples (Italy) area and characterised by the highest volcanic risk on Earth for the extreme urbanisation, undergoes unrest phenomena involving several meters of uplift and intense shallow micro-seismicity since several decades. Despite unrest episodes display in the last decade only moderate ground deformation and seismicity, current interpretations of geochemical data point to a highly pressurized hydrothermal system. We show that at CFc, the usual assumption of vapour-liquid coexistence in the fumarole plumes leads to largely overestimated hydrothermal pressures and, accordingly, interpretations of elevated unrest. By relaxing unconstrained geochemical assumptions, we infer an alternative model yielding better agreement between geophysical and geochemical observations. The model reconciles discrepancies between what observed 1) for two decades since the 1982-84 large unrest, when shallow magma was supplying heat and fluids to the hydrothermal system, and 2) in the last decade. Compared to the 1980's unrest, the post-2005 phenomena are characterized by much lower aquifers overpressure and magmatic involvement, as indicated by geophysical data and despite large changes in geochemical indicators. Our interpretation points out a model in which shallow sills, intruded during 1969-1984, have completely cooled, so that fumarole emissions are affected now by deeper, CO2-richer, magmatic gases producing a relatively modest heating and overpressure of the hydrothermal system. Our results do have important implications on the short-term eruption hazard assessment and on the best strategies for monitoring and interpreting geochemical data.

Low-cost blast wave generator for studies of hearing loss and brain injury: blast wave effects in closed spaces.

Science.gov (United States)

Newman, Andrew J; Hayes, Sarah H; Rao, Abhiram S; Allman, Brian L; Manohar, Senthilvelan; Ding, Dalian; Stolzberg, Daniel; Lobarinas, Edward; Mollendorf, Joseph C; Salvi, Richard

2015-03-15

Military personnel and civilians living in areas of armed conflict have increased risk of exposure to blast overpressures that can cause significant hearing loss and/or brain injury. The equipment used to simulate comparable blast overpressures in animal models within laboratory settings is typically very large and prohibitively expensive. To overcome the fiscal and space limitations introduced by previously reported blast wave generators, we developed a compact, low-cost blast wave generator to investigate the effects of blast exposures on the auditory system and brain. The blast wave generator was constructed largely from off the shelf components, and reliably produced blasts with peak sound pressures of up to 198dB SPL (159.3kPa) that were qualitatively similar to those produced from muzzle blasts or explosions. Exposure of adult rats to 3 blasts of 188dB peak SPL (50.4kPa) resulted in significant loss of cochlear hair cells, reduced outer hair cell function and a decrease in neurogenesis in the hippocampus. Existing blast wave generators are typically large, expensive, and are not commercially available. The blast wave generator reported here provides a low-cost method of generating blast waves in a typical laboratory setting. This compact blast wave generator provides scientists with a low cost device for investigating the biological mechanisms involved in blast wave injury to the rodent cochlea and brain that may model many of the damaging effects sustained by military personnel and civilians exposed to intense blasts. Copyright © 2015 Elsevier B.V. All rights reserved.

Internal stresses in an austeno-ferritic duplex stainless steel

International Nuclear Information System (INIS)

Verhaeghe, B.; Brechet, Y.; Louchet, F.; Massoud, J.P.; Touzeau, D.

1996-04-01

Austeno-ferritic duplex steels possess microstructures containing comparable volume fractions of hard and soft phases which are bi-percolated. They are therefore liable to develop large internal stresses during straining. The evolution and the relaxation of these stresses and the occurrence of damage are characterized using Bauschinger tests. Thermally aged and non-aged material behaviour are compared. Plastic flow in the hard phase is shown to be significantly efficient in releasing these internal stresses. (authors). 15 refs., 8 figs

Simulation Of The Internal-Combustion Engine

Science.gov (United States)

Zeleznik, Frank J.; Mcbride, Bonnie J.

1987-01-01

Program adapts to available information about particular engine. Mathematical model of internal-combustion engine constructed and implemented as computer program suitable for use on large digital computer systems. ZMOTTO program calculates Otto-cycle performance parameters as well as working-fluid compositions and properties throughout cycle for number of consecutive cycles and for variety of input parameters. Written in standard FORTRAN IV.

Large sample NAA facility and methodology development

International Nuclear Information System (INIS)

Roth, C.; Gugiu, D.; Barbos, D.; Datcu, A.; Aioanei, L.; Dobrea, D.; Taroiu, I. E.; Bucsa, A.; Ghinescu, A.

2013-01-01

A Large Sample Neutron Activation Analysis (LSNAA) facility has been developed at the TRIGA- Annular Core Pulsed Reactor (ACPR) operated by the Institute for Nuclear Research in Pitesti, Romania. The central irradiation cavity of the ACPR core can accommodate a large irradiation device. The ACPR neutron flux characteristics are well known and spectrum adjustment techniques have been successfully applied to enhance the thermal component of the neutron flux in the central irradiation cavity. An analysis methodology was developed by using the MCNP code in order to estimate counting efficiency and correction factors for the major perturbing phenomena. Test experiments, comparison with classical instrumental neutron activation analysis (INAA) methods and international inter-comparison exercise have been performed to validate the new methodology. (authors)

Wind and Solar Curtailment: International Experience and Practices

DEFF Research Database (Denmark)

Lew, Debra; Bird, Lori; Milligan, Michael

2013-01-01

High penetrations of wind and solar generation on power systems are resulting in increasing curtailment. Wind and solar integration studies predict increased curtailment as penetration levels grow. This paper examines experiences with curtailment on bulk power systems internationally. It discusses...... how much curtailment is occurring, how it is occurring, why it is occurring, and what is being done to reduce curtailment. This summary is produced as part of the International Energy Agency Wind Task 25 on Design and Operation of Power Systems with Large Amounts of Wind Power....

Poverty and internalizing symptoms: The indirect effect of middle childhood poverty on internalizing symptoms via an emotional response inhibition pathway

Directory of Open Access Journals (Sweden)

Christian G. Capistrano

2016-08-01

Full Text Available Childhood poverty is a pervasive problem that can alter mental health outcomes. Children from impoverished circumstances are more likely than their middle-income counterparts to develop internalizing problems such as depression and anxiety. To date, however, the emotional-cognitive control processes that link childhood poverty and internalizing symptoms remain largely unexplored. Using the Emotion Go/NoGo paradigm, we examined the association between poverty and emotional response inhibition in middle childhood. We further examined the role of emotional response inhibition in the link between middle childhood poverty and internalizing symptoms. Lower income was associated with emotional response inhibition difficulties (indexed by greater false alarm rates in the context of task irrelevant angry and sad faces. Furthermore, emotional response inhibition deficits in the context of angry and sad distracters were further associated with child-report internalizing problems. The results of the current study demonstrate the significance of understanding the emotional-cognitive control vulnerabilities of children raised in poverty and their association with mental health outcomes.

Active accumulation of internal DIC pools reduces transport limitation in large colonies of Nostoc pruniforme

DEFF Research Database (Denmark)

Raun, Ane-Marie Løvendahl; Borum, Jens; Jensen, Kaj Sand

2009-01-01

Nostoc pruniforme is a freshwater cyanobacterium forming large spherical colonies of up to several centimeters in diameter. The size and shape result in low surface area to volume (SA/V) ratios that potentially put severe constraints on resource acquisition. In the present study we have specifica......Nostoc pruniforme is a freshwater cyanobacterium forming large spherical colonies of up to several centimeters in diameter. The size and shape result in low surface area to volume (SA/V) ratios that potentially put severe constraints on resource acquisition. In the present study we have...

The IEA large coil task test results in IFSMTF

International Nuclear Information System (INIS)

Lubell, M.S.; Clinard, J.A.; Dresner, L.

1987-01-01

The Large Coil Task (LCT) is an international collaboration of the United States, EURATOM, Japan, and Switzerland to develop large superconducting magnets for fusion reactors. The testing phase of LCT was completed on September 3, 1987. All six coils exceeded the design goals, both as single coils and in six-coil toroidal tests. In addition, a symmetric torus test was performed in which a maximum field of 9 T was reached in all coils simultaneously. These are by far the largest magnets (either in size, weight, or stored energy) ever to achieve such a field. 6 refs., 6 figs., 3 tabs

Do International Students Appreciate Active Learning in Lectures?

Directory of Open Access Journals (Sweden)

Mauricio Marrone

2018-03-01

Full Text Available Active learning has been linked with increased student motivation, engagement and understanding of course material. It promotes deep learning, helping to develop critical thinking and writing skills in students. Less well understood, however, are the responses of international students to active learning. Using social constructivist theory, the purpose of this study is to examine domestic and international student perceptions of active learning introduced into large undergraduate Accounting Information Systems lectures. Several active learning strategies were implemented over one semester and examined through the use of semi-structured interviews as well as pre- and post- implementation surveys. Our results suggest broad improvements for international students in student engagement and understanding of unit material when implementing active learning strategies. Other key implications include international student preference for active learning compared with passive learning styles, and that international students may receive greater benefits from active learning strategies than domestic students due to social factors. Based on these findings this paper proposes that educators should seek to implement active learning to better assist and integrate students of diverse backgrounds.

International Nuclear Security Situation And China’s Approach

Institute of Scientific and Technical Information of China (English)

Liu Chong

2016-01-01

Since 2010,the three Nuclear Security Summits have made a number of achievements,but the international nuclear security situation is still not relaxed.The rapid development of China’s domestic nuclear facilities and a large amount of nuclear and radioactive materials related to nuclear power,active international nuclear black market in China’s surrounding regions,rather serious domestic and international terrorist threats as well as the emerging technology development bring about new challenges to nuclear security.Facing the complicated and long-term nuclear security situation,China from the perspective of monitoring mechanism,laws and regulations system,technical capability-building and nuclear emergency preparedness,takes a series of effective measures to build the national nuclear security capacity,and strictly fulfills its international obligations,actively participates in upgrading the international nuclear non-proliferation regime and relevant international rules,and actively takes part in the Nuclear Security Summit process,strengthens bilateral cooperation on nuclear security with major countries especially the United States of America,and jointly organizes various training with International Atomic Energy Agency,which has made great contributions to upgrading the global nuclear security level.At the end of the Nuclear Security Summit process,China should continue to strengthen its domestic nuclear security capacity building,and promote the international community to treat the root causes and symptoms,adopt a comprehensive strategy,and work together,effectively prevent and dissolve the nuclear terrorist threats.

Cultural, Social, and Economic Capital Constructs in International Assessments: An Evaluation Using Exploratory Structural Equation Modeling

Science.gov (United States)

Caro, Daniel H.; Sandoval-Hernández, Andrés; Lüdtke, Oliver

2014-01-01

The article employs exploratory structural equation modeling (ESEM) to evaluate constructs of economic, cultural, and social capital in international large-scale assessment (LSA) data from the Progress in International Reading Literacy Study (PIRLS) 2006 and the Programme for International Student Assessment (PISA) 2009. ESEM integrates the…

Developments in Education and International Migrations in New Member States of the EU

OpenAIRE

Kultalahti, Olli

2013-01-01

The paper examines the development of education systems and international migrations in selected new Member States. The countries are Estonia, the Czech Republic and Slovakia. The paper focuses on various elements in the development of education systems making people able to cope with competition on global labour markets. The outcomes of these developments largely regulate the supply of labour and consequently its international demand. Some statistics on international migration and integratio...

Vulnerability analysis in a pwr nuclear power plant containment building

OpenAIRE

Musolas Otaño, Antoni Maria

2013-01-01

When supervising a nuclear power plant, the containment building is crucial. Its functions are guaranteeing structural integrity and avoiding leaks in case of accident. Both events are considered of high risk. Once a given overpressure is registered inside the containment building, three possible outputs are considered: serviceability, breakdown, and collapse. The aim is the study of vulnerability. The vulnerability of the containment building under an overpressure is described by the conditi...

Exploring the Internal Dynamics of Globular Clusters

Science.gov (United States)

Watkins, Laura L.; van der Marel, Roeland; Bellini, Andrea; Luetzgendorf, Nora; HSTPROMO Collaboration

2018-01-01

Exploring the Internal Dynamics of Globular ClustersThe formation histories and structural properties of globular clusters are imprinted on their internal dynamics. Energy equipartition results in velocity differences for stars of different mass, and leads to mass segregation, which results in different spatial distributions for stars of different mass. Intermediate-mass black holes significantly increase the velocity dispersions at the centres of clusters. By combining accurate measurements of their internal kinematics with state-of-the-art dynamical models, we can characterise both the velocity dispersion and mass profiles of clusters, tease apart the different effects, and understand how clusters may have formed and evolved.Using proper motions from the Hubble Space Telescope Proper Motion (HSTPROMO) Collaboration for a set of 22 Milky Way globular clusters, and our discrete dynamical modelling techniques designed to work with large, high-quality datasets, we are studying a variety of internal cluster properties. We will present the results of theoretical work on simulated clusters that demonstrates the efficacy of our approach, and preliminary results from application to real clusters.

International fund flows: surges, sudden stops, and cyclicality

NARCIS (Netherlands)

Li, Suxiao

2017-01-01

International fund flows are cross-border investments in domestic equity and bond markets by global investment funds. They have increased dramatically since the 1990s and played an increasingly important role in the transmission of shocks. In this thesis, we examine the drivers of large changes in

Goals of measurement systems for international safeguards

International Nuclear Information System (INIS)

de Montmollin, J.M.; Weinstock, E.V.

1979-01-01

The safeguards applied by the International Atomic Energy Agency are based on technical performance goals and criteria that have been developed, but not officially adopted by the Agency. The goals derive in part from the external consequences that safeguards are intended to prevent and in some cases on internal considerations of feasibility. To the extent that these goals may not be attainable, as may be the case with large-throughput bulk reprocessing plants, the Agency is placed in a difficult position. In this paper safeguards goals and criteria and their underlying rationales are critically examined. Suggestions for a more rational and workable structure of performance goals are offered

Advection of pollutants by internal solitary waves in oceanic and atmospheric stable stratifications

Directory of Open Access Journals (Sweden)

G. W. Haarlemmer

1998-01-01

Full Text Available When a pollutant is released into the ocean or atmosphere under turbulent conditions, even a steady release is captured by large eddies resulting in localized patches of high concentration of the pollutant. If such a cloud of pollutant subsequently enters a stable stratification-either a pycnocline or thermocline-then internal waves are excited. Since large solitary internal waves have a recirculating core, pollutants may be trapped in the sclitary wave, and advected large distances through the waveguide provided by the stratification. This paper addresses the mechanisms, through computer and physical simulation, by which a localized release of a dense pollutant results in solitary waves that trap the pollutant or disperse the pollutant faster than in the absence of the waves.

JPRS Report, Soviet Union, International Affairs

Science.gov (United States)

1989-01-05

in the realization of a 36,000-hectare irrigation project in the Managua— Granada —Masaya region and the construction of two large workshops for the...coordinating country for the aforementioned irrigation plan in the Managua— Masaya— Granada region. Multilateral collaboration, like bilateral...international economic security corresponding to the needs of the people of the whole world is... a natural continuation of the unions’ basic demands

Internal waves and temperature fronts on slopes

Directory of Open Access Journals (Sweden)

S. A. Thorpe

Full Text Available Time series measurements from an array of temperature miniloggers in a line at constant depth along the sloping boundary of a lake are used to describe the `internal surf zone' where internal waves interact with the sloping boundary. More small positive temperature time derivatives are recorded than negative, but there are more large negative values than positive, giving the overall distribution of temperature time derivatives a small negative skewness. This is consistent with the internal wave dynamics; fronts form during the up-slope phase of the motion, bringing cold water up the slope, and the return flow may become unstable, leading to small advecting billows and weak warm fronts. The data are analysed to detect `events', periods in which the temperature derivatives exceed a set threshold. The speed and distance travelled by `events' are described. The motion along the slope may be a consequence of (a instabilities advected by the flow (b internal waves propagating along-slope or (c internal waves approaching the slope from oblique directions. The propagation of several of the observed 'events' can only be explained by (c, evidence that the internal surf zone has some, but possibly not all, the characteristics of the conventional 'surface wave' surf zone, with waves steepening as they approach the slope at oblique angles.

Key words. Oceanography: general (benthic boundary layers; limnology, Oceanography: physical (internal and inertial waves

ON THE ROLE AND THE DETERMINANTS OF INTERNAL ORGANIZATIONAL COMMUNICATION

Directory of Open Access Journals (Sweden)

Sabina Madalina Somacescu

2017-12-01

Full Text Available Internal communication is important for organizations because it creates a conducive organizational climate for performance. However, internal organizational communication did not receive proper attention in organizational management, nor the resources required for effective implementation. We proposed a framework to analyze organizational communication by establishg its determinants and its role. As a consequence, the management of organization will be able to improve the internal communication. In our study, conducted in a large Romanian organization, we analyzed two factors that influence the internal organizational communication: organizational culture and leadership exercised in the organization. Due to its essential role, in transmitting information and ensuring a climate leading to performance, organizational communication must occupy a central place in the organization's top management concerns.

Managing large online classes across multiple locations.

Science.gov (United States)

Egea, Kathy; Zelmer, A C Lynn

2004-01-01

We now have many different ways of delivering educational offerings, hopefully tailored to the educational environments and student characteristics. Programs vary based on country of origin and delivery location, organisational structures, development and delivery technologies, and the business arrangements made between providers and agents/students. At Central Queensland University (CQU) we deliver the same courses domestically and internationally, often with more than 1000 students per offering, several times per year across 14 campuses located thousands of kilometers apart using face-to-face and/or virtual mode. The students are a mix of Australian distance and on campus plus international on campus. This chapter builds on the CQU experience managing these large classes, particularly within the Faculty of Informatics and Communication, using an evolving mix of technologies. The economic realities of tertiary education require providers to focus on servicing international markets, including an emphasis on student preferences for language of instruction, preferred location (campus or distance delivery) and mode of instruction. Educational delivery requires development and delivery teamwork, maintenance of consistency (quality) in terms of offerings and assessment, appropriate use of technology and cultural awareness.

Pressure loadings of Soviet-designed VVER [Water-Cooled, Water-Moderated Energy Reactor] reactor release mitigation structures from large-break LOCAs

International Nuclear Information System (INIS)

Sienicki, J.J.; Horak, W.C.

1989-01-01

Analyses have been carried out of the pressurization of the accident release mitigation structures of Soviet-designed VVER (Water-Cooled, Water-Moderated Energy Reactor) pressurized water reactors following large-break loss-of-coolant accidents. Specific VVER systems for which calculations were performed are the VVER-440 model V230, VVER-440 model V213, and VVER-1000 model V320. Descriptions of the designs of these and other VVER models are contained in the report DOE/NE-0084. The principal objective of the current analyses is to calculate the time dependent pressure loadings inside the accident localization or containment structures immediately following the double-ended guillotine rupture of a primary coolant pipe. In addition, the pressures are compared with the results of calculations of the response of the structures to overpressure. Primary coolant system thermal hydraulic conditions and the fluid conditions at the break location were calculated with the RETRAN-02 Mod2 computer code (Agee, 1984). Pressures and temperatures inside the building accident release mitigation structures were obtained from the PACER (Pressurization Accompanying Coolant Escape from Ruptures) multicompartment containment analysis code developed at Argonne National Laboratory. The analyses were carried out using best estimate models and conditions rather than conservative, bounding-type assumptions. In particular, condensation upon structure and equipment was calculated using correlations based upon analyses of the HDR, Marviken, and Battelle Frankfurt containment loading experiments. The intercompartment flow rates incorporate an effective discharge coefficient and liquid droplet carryover fraction given by expressions of Schwan determined from analyses of the Battelle Frankfurt and Marviken tests. 5 refs., 4 figs

International energy annual, 1993

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-08

This document presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 200 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy includes hydroelectric, geothermal, solar and wind electric power and alcohol for fuel. The data were largely derived from published sources and reports from US Embassy personnel in foreign posts. EIA also used data from reputable secondary sources, industry reports, etc.

Report of the LASCAR forum: Large scale reprocessing plant safeguards

International Nuclear Information System (INIS)

1992-01-01

This report has been prepared to provide information on the studies which were carried out from 1988 to 1992 under the auspices of the multinational forum known as Large Scale Reprocessing Plant Safeguards (LASCAR) on safeguards for four large scale reprocessing plants operated or planned to be operated in the 1990s. The report summarizes all of the essential results of these studies. The participants in LASCAR were from France, Germany, Japan, the United Kingdom, the United States of America, the Commission of the European Communities - Euratom, and the International Atomic Energy Agency

Strengthening the Conceptualization of Mathematics Pedagogical Content Knowledge for International Studies: A Taiwanese Perspective

Science.gov (United States)

Hsieh, Feng-Jui

2013-01-01

This paper discusses different conceptual frameworks for measuring mathematics pedagogical content knowledge (MPCK) in international comparison studies. Two large-scale international comparative studies, "Mathematics Teaching in the Twenty-First Century" (MT21; Schmidt et al., 2011) and the "Teacher Education and Development Study…

TECHNOLOGICAL IMPERATIVE IMPACT OF GLOBALIZATION ON INTERNATIONAL AGRICULTURAL ECONOMY

Directory of Open Access Journals (Sweden)

А. Кozlova

2014-09-01

Full Text Available The article highlights the factors influencing agricultural production towards global market. The study consists basic fundamental imperatives of globalization on the agricultural sector in international economic relations. The article analyzes the strategic priorities of the international agricultural sector, which includes financial and credit support, legal aspects, processes and integration of organizational structures. Technological imperatives require a large structural and institutional turn in the Ukrainian economy on the basis of current trends in the global economy, scientific and technical potential. There is a growing importance of organizing and conducting international level in the field of technological forecasting. This type of prediction is considered as backbone component in strategic forecasting and economic development programming.

Leprosy: International Public Health Policies and Public Health Eras

Directory of Open Access Journals (Sweden)

Niyi Awofeso

2011-09-01

Full Text Available Public health policies continue to play important roles in national and international health reforms. However, the influence and legacies of the public health eras during which such policies are formulated remain largely underappreciated. The limited appreciation of this relationship may hinder consistent adoption of public health policies by nation-states, and encumber disinvestment from ineffective or anachronistic policies. This article reviews seven public health eras and highlights how each era has influenced international policy formulation for leprosy control—“the fertile soil for policy learning”. The author reiterates the role of health leadership and health activism in facilitating consistency in international health policy formulation and implementation for leprosy control.

Internationalization Measures in Large Scale Research Projects

Science.gov (United States)

Soeding, Emanuel; Smith, Nancy

2017-04-01

Internationalization measures in Large Scale Research Projects Large scale research projects (LSRP) often serve as flagships used by universities or research institutions to demonstrate their performance and capability to stakeholders and other interested parties. As the global competition among universities for the recruitment of the brightest brains has increased, effective internationalization measures have become hot topics for universities and LSRP alike. Nevertheless, most projects and universities are challenged with little experience on how to conduct these measures and make internationalization an cost efficient and useful activity. Furthermore, those undertakings permanently have to be justified with the Project PIs as important, valuable tools to improve the capacity of the project and the research location. There are a variety of measures, suited to support universities in international recruitment. These include e.g. institutional partnerships, research marketing, a welcome culture, support for science mobility and an effective alumni strategy. These activities, although often conducted by different university entities, are interlocked and can be very powerful measures if interfaced in an effective way. On this poster we display a number of internationalization measures for various target groups, identify interfaces between project management, university administration, researchers and international partners to work together, exchange information and improve processes in order to be able to recruit, support and keep the brightest heads to your project.

7th International Geostatistics Congress

CERN Document Server

Deutsch, Clayton

2005-01-01

The conference proceedings consist of approximately 120 technical papers presented at the Seventh International Geostatistics Congress held in Banff, Alberta, Canada in 2004. All the papers were reviewed by an international panel of leading geostatisticians. The five major sections are: theory, mining, petroleum, environmental and other applications. The first section showcases new and innovative ideas in the theoretical development of geostatistics as a whole; these ideas will have large impact on (1) the directions of future geostatistical research, and (2) the conventional approaches to heterogeneity modelling in a wide range of natural resource industries. The next four sections are focused on applications and innovations relating to the use of geostatistics in specific industries. Historically, mining, petroleum and environmental industries have embraced the use of geostatistics for uncertainty characterization, so these three industries are identified as major application areas. The last section is open...

International Masterclasses - bringing LHC data to school children

Directory of Open Access Journals (Sweden)

Bilow Uta

2014-04-01

Full Text Available International Masterclasses provide an opportunity for high school students to be “scientists for a day”. 15- to 19-year-old students in countries around the whole world are invited to one of about 160 nearby universities or research centres for one day in order to take part in an authentic research process. Lectures from active scientists give insight in topics and methods of basic research at the fundaments of matter and forces, enabling the students to perform measurements on real data from CERN's Large Hadron Collider. At the end of each day, like in an international research collaboration, the participants join in a video conference with other students groups and CERN for discussion and combination of their results. In 2013, about 10.000 students from 37 countries participated in the program. International Masterclasses are organised by IPPOG (International Particle Physics Outreach Group and have the potential to add valuable experiences to physics education in school environments.

International Joint Conference CISIS’15 and ICEUTE’15

CERN Document Server

Baruque, Bruno; Sedano, Javier; Quintián, Héctor; Corchado, Emilio

2015-01-01

This volume of Advances in Intelligent and Soft Computing contains accepted papers presented at the 8th International Conference on Computational Intelligence in Security for Information Systems (CISIS 2015) and the 6th International Conference on EUropean Transnational Education (ICEUTE 2015). These conferences were held in the beautiful and historic city of Burgos (Spain), in June 2015. The aim of the 8th CISIS conference is to offer a meeting opportunity for academic and industry-related researchers belonging to the various, vast communities of Computational Intelligence, Information Security, and Data Mining. The need for intelligent, flexible behaviour by large, complex systems, especially in mission-critical domains, is intended to be the catalyst and the aggregation stimulus for the overall event. After a through peer-review process, the CISIS 2015 International Program Committee selected 43 papers, written by authors from 16 different countries. In the case of 6th ICEUTE conference, the International ...

Some safety aspects of CO2 vapour compression systems

Energy Technology Data Exchange (ETDEWEB)

Pettersen, J. [Department of Refrigeration and Air Conditioning, Norwegian University of Science and Technology NTNU, Trondheim (Norway); Hafner, A.; Braanaas, M. [SINTEF Energy Research, Refrigeration and Air Conditioning, Trondheim (Norway)

2000-11-01

Since CO2 is a non-toxic and non-flammable refrigerant, the major safety issues for CO2 systems are related to the high operating pressure. In case of a component rupture, the explosion energy (stored energy) may characterise the extent of potential damage.The explosion energy can be estimated based on component (refrigerant-side) volumes, pressures and refrigerant property data. The explosion (stored) energies of baseline systems and CO2 systems are calculated and compared. Results show that the explosion energies are not as different as the large difference in pressure would indicate. It has been suggested that a Boiling Liquid Expanding Vapour Explosion (BLEVE) may occur when a vessel containing pressurised liquid or supercritical fluid is rapidly depressurised, e.g. due to a crack or a rupture. The overpressure from a BLEVE may be high enough to rupture the whole vessel, with a resulting blast wave and risk of flying fragments. Some tests on CO2 have been conducted at varying initial conditions and liquid fill levels, and with varying vent areas. No significant overpressure peaks above the initial pressure has been observed in the current test programme. 19 refs.

Preliminary COM3D Analysis for H{sub 2} Combustion in the APR1400 Containment

Energy Technology Data Exchange (ETDEWEB)

Kang, Hyung Seok; Kim, Jongtae; Kim, Sang-Baik; Hong, Seong-Wan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

In order to assure the containment integrity of APR1400, it is necessary to evaluate an overpressure buildup resulting from a propagation of hydrogen flame along the structure and wall in the containment during a severe accident using the COM3D. Korea Atomic Energy Research Institute (KAERI) established a numerical analysis system for evaluating an overpressure buildup owing to a hydrogen combustion in the containment of a nuclear power plant by importing COM3D from KIT in Germany. The COM3D has been currently used in the simulations of the combustions and explosions, together with the system of industrial risk mitigation of hydrogen and burnable gases in nuclear containment and auxiliary buildings. KAERI performed the hydrogen combustion analysis using the COM3D code with the initial hydrogen distribution calculated by the GASFLOW under assumption of 85% metal-water reaction in the reactor vessel. From the COM3D results, we can know that the pressure buildup was about 100 kPa because the flame speed was not increased above 1000 m/s and the pressure wave passed through the open spaces in the large containment.

Multinational Corporation and International Strategic Alliance

Institute of Scientific and Technical Information of China (English)

陆兮

2015-01-01

The world is now deeply into the second great wave of globalization, in which product, capital, and markets are becoming more and more integrated across countries. Multinational corporations are gaining their rapid growth around the globe and playing a significant role in the world economy. Meanwhile, the accelerated rate of globalization has also imposed pressures on MNCs, left them desperately seeking overseas alliances in order to remain competitive. International strategic alliances, which bring together large and commonly competitive firms for specific purposes, have gradual y shown its importance in the world market. And the form of international joint venture is now widely adopted. Then after the formation of alliances, selecting the right partner, formulating right strategies, establishing harmonious and effective partnership are generally the key to success.

Internal Audit Service | Internal Audit Service

Science.gov (United States)

their internal auditing function in the areas of professional excellence, quality of service and Students and teachers Media Internal Audit Service Navbar Toggle Home About the Staff Risk Assessment and Planning Internal Audit Process Search for Search Home The mission of the Fermilab Internal Audit Service

International conventions and agreements in the ecological area: In light of modern civilization and international trade

Directory of Open Access Journals (Sweden)

Stanković Milica

2014-01-01

Full Text Available A large number of authors examine the problem of environmental protection in their papers. The concept of sustainable development and intensive use of modern technology in order to overcome the environmental problems of modern civilization becomes an imperative. Theoretical engagement in ecological issues is not enough. It is necessary to implement ecological measures in practice and to spread environmental awareness. Modern science and social practice have interdependence of economy and ecology in their focus. The main direction of social change is movement from economic to ecological paradigm that involves an ethical responsibility to the current and future generations. There is a need to establish effective programs to protect the environment at the national and supranational level. Active international cooperation in the field of ecology has resulted in the formulation of a number of documents on environmental protection. This paper illustrates the importance of environmental protection and the necessity of implementing international conventions and agreements in the environmental field, with focus on their impact on international trade.

Teaching international animal agriculture.

Science.gov (United States)

Lukefahr, S D

1999-11-01

Students who major in animal science at U.S. institutions are generally exposed to a curriculum that emphasizes commercial, large-scale production of the few traditional food animals: cattle, poultry, sheep, and swine. Globally, most farmers live in lesser-developed countries under limited-resource conditions of land, feed supplies, equipment, and capital. The promotion of commercial animal production enterprises may not be appropriate for such farms because it can subject farmers to considerable economic risk. Rather, use of limited numbers of large livestock, locally adapted breeds, or smaller livestock (e.g., ducks, goats, guinea pigs, and rabbits) may be more appropriate under subsistence, integrated farming systems. In this global context, a course in international animal agriculture has been taught for 15 yr to undergraduate and graduate students. The course consists of a review of traditional and potential livestock species well suited for impoverished families on small farms and methods to implement sustainable livestock projects, including feasibility, design, implementation, monitoring, and evaluation stages. To enhance student understanding, global food issues and challenges are illustrated with case studies. A term paper is also assigned for which students choose three suitable livestock species or local breeds that would be complementary on a small crop farm (< 5 ha). Daily dietary requirements of protein and energy per family member are calculated. Itemized enterprise budgets and production tables are prepared. Early in the course, the general consensus of students was that people who are malnourished and live in poverty have low personal ambition and motivation, and that their problems should be amenable to solution by application of American technology and expertise. The course modifies such attitudes and enhances a student's critical thinking and problem-solving abilities and communication skills. Course evaluations indicated that students believed

Software for the international linear collider: Simulation and ...

Indian Academy of Sciences (India)

Software plays an increasingly important role already in the early stages of a large project like the ILC. In international collaboration a data format for the ILC detector and physics studies has been developed. Building upon this software frameworks are made available which ease the event reconstruction and analysis.

Internal logistics as a part of supply chain : case : Nokia-China, Dongguang Branch

OpenAIRE

Tian, Ran

2009-01-01

Internal logistics is one of the most important sections within enterprises, especially in the large manufacturing companies. It manages, arranges, plans and delivers the finished products. It is an indispensable part of the supply chain, as well as reflects the result of implementation company strategy. This study focuses on finding the possible ways to improve the operation process of Nokia-China internal logistics by looking into Nokia-China’s internal logistics in Dongguan Branch- Su...

Space Technology and Applications International Forum -1999. Proceedings

International Nuclear Information System (INIS)

El-Genk, M.S.

1999-01-01

These proceedings represent papers presented at the 1999 Space Technology and Applications International Forum (STAIF-99). This is a large conference in terms of the number of hosted technical sessions and the technical papers presented. This year's theme, ''Opportunities and Challenges for the New Millenium,'' covered a broad spectrum of topics in space science and technology that spans the range from basic research, such as thermophysics in microgravity and breakthrough propulsion physics, to the most recent advances in space power and propulsion, space exploration and commercialization, next generation launch systems, and the international effort to deploy and assemble the international space station. STAIF-99 was co-sponsored by the United States Department of Energy. The two-volume proceedings includes 253 articles, out of which 28 have been abstracted for the Energy,Science and Technology database

Flavivirus internalization is regulated by a size-dependent endocytic pathway.

Science.gov (United States)

Hackett, Brent A; Cherry, Sara

2018-04-17

Flaviviruses enter host cells through the process of clathrin-mediated endocytosis, and the spectrum of host factors required for this process are incompletely understood. Here we found that lymphocyte antigen 6 locus E (LY6E) promotes the internalization of multiple flaviviruses, including West Nile virus, Zika virus, and dengue virus. Perhaps surprisingly, LY6E is dispensable for the internalization of the endogenous cargo transferrin, which is also dependent on clathrin-mediated endocytosis for uptake. Since viruses are substantially larger than transferrin, we reasoned that LY6E may be required for uptake of larger cargoes and tested this using transferrin-coated beads of similar size as flaviviruses. LY6E was indeed required for the internalization of transferrin-coated beads, suggesting that LY6E is selectively required for large cargo. Cell biological studies found that LY6E forms tubules upon viral infection and bead internalization, and we found that tubule formation was dependent on RNASEK, which is also required for flavivirus internalization, but not transferrin uptake. Indeed, we found that RNASEK is also required for the internalization of transferrin-coated beads, suggesting it functions upstream of LY6E. These LY6E tubules resembled microtubules, and we found that microtubule assembly was required for their formation and flavivirus uptake. Since microtubule end-binding proteins link microtubules to downstream activities, we screened the three end-binding proteins and found that EB3 promotes virus uptake and LY6E tubularization. Taken together, these results highlight a specialized pathway required for the uptake of large clathrin-dependent endocytosis cargoes, including flaviviruses. Copyright © 2018 the Author(s). Published by PNAS.

Studies on GEM modules for a Large Prototype TPC for the ILC

International Nuclear Information System (INIS)

Tsionou, Dimitra

2017-01-01

The International Linear Collider (ILC) is a future electron–positron collider with centre of mass energy of 500–1000 GeV. The International Large Detector (ILD) is one of two detector concepts at the ILC. Its high precision tracking system consists of Silicon sub-detectors and a Time Projection Chamber (TPC) equipped with micro-pattern gas detectors (MPGDs). Within the framework of the LCTPC collaboration, a Large Prototype (LP) TPC has been built as a demonstrator. This prototype has been equipped with Gas Electron Multiplier (GEM) modules and studied with electron beams of energies 1–6 GeV at the DESY test beam facility. The performance of the prototype detector and the extrapolation to the ILD TPC is presented here. In addition, ongoing optimisation studies and R&D activities in order to prepare the next GEM module iteration are discussed.

Studies on GEM modules for a Large Prototype TPC for the ILC

Energy Technology Data Exchange (ETDEWEB)

Tsionou, Dimitra, E-mail: dimitra.tsionou@desy.de

2017-02-11

The International Linear Collider (ILC) is a future electron–positron collider with centre of mass energy of 500–1000 GeV. The International Large Detector (ILD) is one of two detector concepts at the ILC. Its high precision tracking system consists of Silicon sub-detectors and a Time Projection Chamber (TPC) equipped with micro-pattern gas detectors (MPGDs). Within the framework of the LCTPC collaboration, a Large Prototype (LP) TPC has been built as a demonstrator. This prototype has been equipped with Gas Electron Multiplier (GEM) modules and studied with electron beams of energies 1–6 GeV at the DESY test beam facility. The performance of the prototype detector and the extrapolation to the ILD TPC is presented here. In addition, ongoing optimisation studies and R&D activities in order to prepare the next GEM module iteration are discussed.

Studies on GEM modules for a large prototype TPC for the ILC

International Nuclear Information System (INIS)

Tsionou, Dimitra

2016-12-01

The International Linear Collider (ILC) is a future electron-positron collider with centre of mass energy of 500-1000 GeV. The International Large Detector (ILD) is one of two detector concepts at the ILC. Its high precision tracking system consists of Silicon sub-detectors and a Time Projection Chamber (TPC) equipped with micro-pattern gas detectors (MPGDs). Within the framework of the LCTPC collaboration, a Large Prototype (LP) TPC has been built as a demonstrator. This prototype has been equipped with Gas Electron Multiplier (GEM) modules and studied with electron beams of energies 1-6 GeV at the DESY test beam facility. The performance of the prototype detector and the extrapolation to the ILD TPC is presented here. In addition, ongoing optimisation studies and R and D; activities in order to prepare the next GEM module iteration are discussed.

Approximating a free-field blast environment in the test section of an explosively driven conical shock tube

Science.gov (United States)

Stewart, J. B.

2018-02-01

This paper presents experimental data on incident overpressures and the corresponding impulses obtained in the test section of an explosively driven 10° (full angle) conical shock tube. Due to the shock tube's steel walls approximating the boundary conditions seen by a spherical sector cut out of a detonating sphere of energetic material, a 5.3-g pentolite shock tube driver charge produces peak overpressures corresponding to a free-field detonation from an 816-g sphere of pentolite. The four test section geometries investigated in this paper (open air, cylindrical, 10° inscribed square frustum, and 10° circumscribed square frustum) provide a variety of different time histories for the incident overpressures and impulses, with a circumscribed square frustum yielding the best approximation of the estimated blast environment that would have been produced by a free-field detonation.

The Analysis of Loop Seal Purge Time for the KHNP Pressurizer Safety Valve Test Facility Using the GOTHIC Code

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Ae; Kim, Chang Hyun; Kweon, Gab Joo; Park, Jong Woon [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of)

2007-10-15

The pressurizer safety valves (PSV) in Pressurized Water Reactors are required to provide the overpressure protection for the Reactor Coolant System (RCS) during the overpressure transients. Korea Hydro and Nuclear Power Company (KHNP) plans to build the PSV test facility for the purpose of providing the PSV pop-up characteristics and the loop seal dynamics for the new safety analysis. When the pressurizer safety valve is mounted in a loop seal configuration, the valve must initially pass the loop seal water prior to popping open on steam. The loop seal in the upstream of PSV prevents leakage of hydrogen gas or steam through the safety valve seat. This paper studies on the loop seal clearing dynamics using GOTHIC-7.2a code to verify the effects of loop seal purge time on the reactor coolant system overpressure.

Geomechanical effects on CO₂ leakage through fault zones during large-scale underground injection

Energy Technology Data Exchange (ETDEWEB)

Rinaldi, Antonio P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Rutqvist, Jonny [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cappa, Frédéric [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of Nice Sophia-Antipolis, Nice (France). Cote d' Azur Observatory. GeoAzur

2013-12-01

The importance of geomechanics—including the potential for faults to reactivate during large-scale geologic carbon sequestration operations—has recently become more widely recognized. However, notwithstanding the potential for triggering notable (felt) seismic events, the potential for buoyancy-driven CO₂ to reach potable groundwater and the ground surface is actually more important from public safety and storage-efficiency perspectives. In this context, this paper extends the previous studies on the geomechanical modeling of fault responses during underground carbon dioxide injection, focusing on the short-term integrity of the sealing caprock, and hence on the potential for leakage of either brine or CO₂ to reach the shallow groundwater aquifers during active injection. We consider stress/strain-dependent permeability and study the leakage through the fault zone as its permeability changes during a reactivation, also causing seismicity. We analyze several scenarios related to the volume of CO₂ injected (and hence as a function of the overpressure), involving both minor and major faults, and analyze the profile risks of leakage for different stress/strain-permeability coupling functions. We conclude that whereas it is very difficult to predict how much fault permeability could change upon reactivation, this process can have a significant impact on the leakage rate. Moreover, our analysis shows that induced seismicity associated with fault reactivation may not necessarily open up a new flow path for leakage. Results show a poor correlation between magnitude and amount of fluid leakage, meaning that a single event is generally not enough to substantially change the permeability along the entire fault length. Finally, and consequently, even if some changes in permeability occur, this does not mean that the CO₂ will migrate up along the entire fault, breaking through the caprock to enter the overlying aquifer.

The Atacama Large Millimeter/Submillimeter Array (ALMA) - A Successful Three-Way International Partnership Without a Majority Stakeholder

Science.gov (United States)

Vanden Bout, Paul A.

2013-04-01

The Atacama Millimeter/Submillimeter Array (ALMA) is the largest ground-based astronomical facility built to date. It's size and challenging site required an international effort. This talk presents the partnership structure, management challenges, current status, and examples of early scientific successes.

Large and small baseload power plants: Drivers to define the optimal portfolios

International Nuclear Information System (INIS)

Locatelli, Giorgio; Mancini, Mauro

2011-01-01

Despite the growing interest in Small Medium sized Power Plants (SMPP) international literature provides only studies related to portfolios of large plants in infinite markets/grids with no particular attention given to base load SMPP. This paper aims to fill this gap, investigating the attractiveness of SMPP portfolios respect to large power plant portfolios. The analysis includes nuclear, coal and combined cycle gas turbines (CCGT) of different plant sizes. The Mean Variance Portfolio theory (MVP) is used to define the best portfolio according to Internal Rate of Return (IRR) and Levelised Unit Electricity Cost (LUEC) considering the life cycle costs of each power plant, Carbon Tax, Electricity Price and grid dimension. The results show how large plants are the best option for large grids, while SMPP are as competitive as large plants in small grids. In fact, in order to achieve the highest profitability with the lowest risk it is necessary to build several types of different plants and, in case of small grids, this is possible only with SMPP. A further result is the application of the framework to European OECD countries and the United States assessing their portfolios. - Highlights: ► The literature about power plant portfolios does not consider small grids and IRR. ► We evaluated Base load portfolios respect to IRR and LUEC. ► We assessed the influence of grid and plant size, CO 2 cost and Electricity Price. ► Large plants are optimal for large markets even if small plants have similar IRR. ► Small plants are suitable to diversify portfolios in small grids reducing the risk.

Building sustainable institutions ? : the results of international administration in Bosnia & Herzegovina and Kosovo: 1995-2008

NARCIS (Netherlands)

Willigen, Niels Johannes Gerard van

2009-01-01

In recent years, there have been several large and ambitious international administrations established to govern territories plagued by war and left without effective governments. The international administrations in Bosnia and Herzegovina (Bosnia) and in Kosovo were among those established.

International Trade. International Business

OpenAIRE

Мохнюк, А. М.; Mokhniuk, A. M.

2015-01-01

Work programme of the study course “International Trade. International Business” was prepared in accordance with educational and vocational training program for bachelors of training direction 6.030601 “Management”.

Proceedings of the NEACRP/IAEA Specialists meeting on the international comparison calculation of a large sodium-cooled fast breeder reactor at Argonne National Laboratory on February 7-9, 1978

International Nuclear Information System (INIS)

LeSage, L.G.; McKnight, R.D.; Wade, D.C.; Freese, K.E.; Collins, P.J.

1980-08-01

The results of an international comparison calculation of a large (1250 MWe) LMFBR benchmark model are presented and discussed. Eight reactor configurations were calculated. Parameters included with the comparison were: eigenvalue, k/sub infinity/, neutron balance data, breeding reaction rate ratios, reactivity worths, central control rod worth, regional sodium void reactivity, core Doppler and effective delayed neutron fraction. Ten countries participated in the comparison, and sixteen solutions were contributed. The discussion focuses on the variation in parameter values, the degree of consistency among the various parameters and solutions, and the identification of unexpected results. The results are displayed and discussed both by individual participants and by groupings of participants

Cultural Distance and the Performance of International Joint Ventures

DEFF Research Database (Denmark)

Christoffersen, Jeppe; Globerman, Steven; Nielsen, Bo Bernhard

2013-01-01

This study provides a critical summary and assessment of the empirical literature on the relationship between cultural distance and the performance of international joint ventures (IJVs) based on studies published over the period 1993-2008. The existing literature reports inconsistent and largely...

Materials management in an internationally safeguarded fuels reprocessing plant

International Nuclear Information System (INIS)

Hakkila, E.A.; Cobb, D.D.; Dayem, H.A.; Dietz, R.J.; Kern, E.A.; Markin, J.T.; Shipley, J.P.; Barnes, J.W.; Scheinman, L.

1980-04-01

The first volume of this report summarizes the results and conclusions for this study of conventional and advanced nuclear materials accounting systems applicable for both large (1500 MTHM/y) and small (210 MTHM/y) spent-fuel reprocessing facilities subject to international verification

The International Lunar Decade Declaration

Science.gov (United States)

Beldavs, V.; Foing, B.; Bland, D.; Crisafulli, J.

2015-10-01

The International Lunar Decade Declaration was discussed at the conference held November 9-13, 2014 in Hawaii "The Next Giant Leap: Leveraging Lunar Assets for Sustainable Pathways to Space" - http://2014giantleap.aerospacehawaii.info/ and accepted by a core group that forms the International Lunar Decade Working Group (ILDWG) that is seeking to make the proposed global event and decade long process a reality. The Declaration will be updated from time to time by members of the ILDWreflecting new knowledge and fresh perspectives that bear on building a global consortium with a mission to progress from lunar exploration to the transformation of the Moon into a wealth gene rating platform for the expansion of humankind into the solar system. When key organizations have endorsed the idea and joined the effort the text of the Declaration will be considered final. An earlier International Lunar Decade proposal was issued at the 8th ICEUM Conference in 2006 in Beijing together with 13 specific initiatives for lunar exploration[1,2,3]. These initiatives have been largely implemented with coordination among the different space agencies involved provided by the International Lunar Exploration Working Group[2,3]. The Second International Lunar Decade from 2015 reflects current trends towards increasing involvement of commercial firms in space, particularly seeking opportunities beyond low Earth orbit. The central vision of the International Lunar Decade is to build the foundations for a sustainable space economy through international collaboration concurrently addressing Lunar exploration and building a shared knowledge base;Policy development that enables collabo rative research and development leading to lunar mining and industrial and commercial development;Infrastructure on the Moon and in cislunar space (communications, transport, energy systems, way-stations, other) that reduces costs, lowers risks and speeds up the time to profitable operations;Enabling technologies

“A time of fear”: local, national, and international responses to a large Ebola outbreak in Uganda

Directory of Open Access Journals (Sweden)

Kinsman John

2012-06-01

Full Text Available Abstract Background This paper documents and analyses some of the responses to the largest Ebola outbreak on record, which took place in Uganda between September 2000 and February 2001. Four hundred and twenty five people developed clinical symptoms in three geographically distinct parts of the country (Gulu, Masindi, and Mbarara, of whom 224 (53% died. Given the focus of previous social scientific Ebola research on experiences in communities that have been directly affected, this article expands the lens to include responses to the outbreak in local, national, and international contexts over the course of the outbreak. Methods Responses to the outbreak were gauged through the articles, editorials, cartoons, and letters that were published in the country’s two main English language daily national newspapers: the New Vision and the Monitor (now the Daily Monitor. All the relevant pieces from these two sources over the course of the epidemic were cut out, entered onto a computer, and the originals filed. The three a priori codes, based on the local, national, and international levels, were expanded into six, to include issues that emerged inductively during analysis. The data within each code were subsequently worked into coherent, chronological narratives. Results A total of 639 cuttings were included in the analysis. Strong and varied responses to the outbreak were identified from across the globe. These included, among others: confusion, anger, and serious stigma in affected communities; medical staff working themselves to exhaustion, with some quitting their posts; patients fleeing from hospitals; calls on spiritual forces for protection against infection; a well-coordinated national control strategy; and the imposition of some international travel restrictions. Responses varied both quantitatively and qualitatively according to the level (i.e. local, national, or international at which they were manifested. Conclusions The Ugandan