Sochi the winner in the battle for the Olympic Games 2014

OpenAIRE

Barabanova, V.

2013-01-01

The Olympic Games provide a powerful impetus to the economic and socio-cultural development of the country, but also contribute to its standing in the international arena. For ENGsia, the Olympics will not only become a milestone in terms of image, but also will greatly increase the status of the city of Sochi and the country, will have a powerful impact on the development of the Krasnodar region and the economy as a whole, attract a lot of sponsors to collaborate, both domestic and foreign. ...

«Sochi Goes International» – Required Actions to be Taken to Facilitate the Stay for International Tourists

Directory of Open Access Journals (Sweden)

Eduard Besel

2012-09-01

Full Text Available As host city of many big international sport events, Sochi's publicity is increasing and people from all over the world will discover it as a new travel destination. To guarantee and enlarge the attractiveness and popularity of the city, some essential improvements, which would facilitate the stay for international tourists, are recommended.

Russia and Its International Image: From Sochi Olympic Games to Annexing Crimea

Directory of Open Access Journals (Sweden)

Kobierecki Michał

2016-12-01

Full Text Available The aim of the article is to analyze the change of the Russian Federation’s international image in the light of two significant events: the Olympic Winter Games in 2014 in Sochi and the annexation of Crimea. According to the first hypothesis, one of the main aims for hosting the Olympic Games was to improve the international prestige of Russia. Shortly after the Olympics Russia increased its activity in Eastern Ukraine, which resulted in the annexation of the Crimean Peninsula. Therefore the article is also aimed to investigate whether by annexing Crimea Russia squandered the possible positive effects of hosting the Olympics in terms of its international image.

[Principle directions for the creation and organization of the system of sanitary-epidemiological safety during the preparations for the XXII Olympic Winter Games and XI Paralympic Winter Games 2014 in Sochi].

Science.gov (United States)

Onishchenko, G G; Bragina, I V; Ezhlova, E B; Demina, V P; Gorskiĭ, A A; Gus'kov, A S; Aksenova, O I; Ivanov, G E; Klindukhov, V P; Nikolaevich, P N; Grechanaia, T B; Kulichenko, A N; Maletskaia, O V; Manin, E A; Parkhomenko, V V; Kulichenko, O A

2015-01-01

The paper generalizes the experience of formation of protection system against biological threats and ensuring sanitary and epidemiological welfare during preparation for the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in Sochi. The basic steps for creating this system, since 2007, participation and role of Rospotrebnadzor in this process are shown. The paper deals with such questions as the governmental and administrative structures with federal agencies interaction, development of a regulatory framework governing the safety system of the Olympic Games, development of algorithms of information exchange and management decisions, biological safety in developing infrastructure in Sochi.

Measuring the regional economic impact of mega-events: what are the benefits of the 2014 Olympics for Sochi?

OpenAIRE

Mueller, Martin

2009-01-01

The economic benefits of mega-events such as the Olympic Games are much touted but little quantified. This paper first presents a systematisation of the money streams associated with hosting the Olympic Games and then introduces basic concepts from regional economics. On this basis it outlines a general model that could be employed to estimate the regional economic impact of tourism associated with the Olympic Winter Games in Sochi in 2014.

Ethno-Demographic Processes in the North-East Black Sea Area in the 19th – Early 21th Centuries (through the Example of Greater Sochi

Directory of Open Access Journals (Sweden)

Aleksandr A. Cherkasov

2015-06-01

Full Text Available This article examines ethno-demographic processes in the north-east Black Sea area, more specifically the territory of Greater Sochi, in the 19th – early 21th centuries. In writing the article, the authors have relied on archive materials from the archives department of the administration of the city of Novorossiysk and the archives department of the administration of the city of Sochi. The authors have consulted reference pre-revolution literature, Soviet-era and present-day population censuses, as well as the findings of present-day research studies. The methodological basis of this study are the principles of historicism, objectivity, and systemicity, which helps to get an insight into the general patterns and regional peculiarities in the demographic development of the major ethnicities in the north-east Black Sea area in the 19th-20th centuries. The authors touch upon the process of colonization of the territory and its ethnic composition. In the end, the authors come to the conclusion that the ethno-demographic picture of Greater Sochi had been forming in a complicated fashion. As a consequence, in the second half of the 19th century, following the Caucasian War, the territory had to be repopulated. Resettlement flows from different locations in the Russian Empire and overseas had formed by 1917 an ethno-picture that featured Russians and Armenians as two principal ethnicities. The authors note that this picture has not changed in a major way to this day.

[Using modern information technology in the practice of the sanitary-epidemiological surveiliance during the XXII Olympic Winter Games and XI Paralympic Winter Games in Sochi].

Science.gov (United States)

Popova, A Yu; Kuzkin, B P; Demina, Yu V; Dubyansky, V M; Kulichenko, A N; Maletskaya, O V; Shayakhmetov, O Kh; Semenko, O V; Nazarenko, Yu V; Agapitov, D S; Mezentsev, V M; Kharchenko, T V; Efremenko, D V; Oroby, V G; Klindukhov, V P; Grechanaya, T V; Nikolaevich, P N; Tesheva, S Ch; Rafeenko, G K

2015-01-01

To improve the sanitary and epidemiological surveillance at the Olympic Games has developed a system of GIS for monitoring objects and situations in the region of Sochi. The system is based on software package ArcGIS, version 10.2 server, with Web-java.lang. Object, Web-server Apach, and software developed in language java. During th execution of the tasks are solved: the stratification of the region of the Olympic Games for the private and aggregate epidemiological risk OCI various eti- ologies, ranking epidemiologically important facilities for the sanitary and hygienic conditions, monitoring of infectious diseases (in real time according to the preliminary diagnosis). GIS monitoring has shown its effectiveness: Information received from various sources, but focused on one portal. Information was available in real time all the specialists involved in ensuring epidemiological well-being and use at work during the Olympic Games in Sochi.

The Policy of Paternalism and the Issue of Deviation during the 1960s–1980s in the South of Russia (through the Example of Greater Sochi

Directory of Open Access Journals (Sweden)

Ivan A. Ermachkov

2014-12-01

Full Text Available The state, as a social institute, undergoes amid political and social-economic transformations not only the reformation of social relations but, as a reaction of these changes, causes the collapse of existing social guideposts, norms, and ideals in society. This study is aimed at identifying the major issues and shortcomings in the operation of the Soviet urban system of prevention of child neglect and juvenile delinquency, identifying the social reasons behind the emergence of child neglect characteristic of the resort city of Sochi, assessing child neglect issues, and coming up with ways to resolve them for entities within the system of prevention of child neglect and juvenile delinquency and other interest groups. The article is dedicated to exploring the issue of juvenile behavior in the resort city of Sochi during the period of the policy of paternalism in the 1960s-1980s.

[Operation and interaction peculiarities of diagnostic laboratories involved in providing protection from infectious diseases during the XXII Olympic Winter Games and XI Paralympic Winter Games 2014 in Sochi].

Science.gov (United States)

Onishenko, G G; Popova, A Iu; Bragina, I V; Kuz'kin, B P; Ezhlova, E B; Demina, Iu V; Gus'kov, A S; Ivanov, G E; Chikina, L V; Klindukhova, V P; Grechanaia, T V; Tesheva, S Ch; Kulichenko, A N; Efremenko, D B; Manin, E A; Kuznetsova, I V; Parkhomenko, V V; Kulichenko, O A; Rafeenko, G K; Shcherbina, L I; Zavora, D L; Briukhanov, A F; Eldinova, V E; Iunicheva, Iu V; Derliatko, S K; Komarov, N S

2015-01-01

The experience of the organization and functioning of the laboratory network during the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in Sochi is considered. Efforts to establish an effective system of laboratory support, the order of work and interaction of diagnostic laboratories involved in diseases control of population during the Olympic Games are analyzed.

Mössbauer investigation of the influence of the sea atmosphere on the corrosion of steel constructions in Sochi

International Nuclear Information System (INIS)

Filippov, V. P.; Lauer, D. E.; Lauer, Yu. A.; Kargin, N. I.; Goloborodko, P. G.; Goloborodko, I. V.; Poliakov, A. M.

2013-01-01

A study of the sea atmosphere influence on the corrosion products of steel constructions near Sochi at difference distances from the sea has been made. The phases and compositions of the corrosion products formed on different sides of steel construction elements were examined by using Mössbauer spectroscopy (at 298 and 78 K). The results show that phases and composition distributions in oxide films are different on different parts of the constructions. The differences depend not only on the distance from the sea, but from their relative orientation to the sea also. The phase structure of the oxide films on different positions is identified.

Proceedings – Mathematical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Proceedings – Mathematical Sciences. SENJO SHIMIZU. Articles written in Proceedings – Mathematical Sciences. Volume 127 Issue 5 November 2017 pp 815-831 Special Issue. Qualitative behaviour of incompressible two-phase flows with phase transitions: The isothermal case · JAN PRÜSS SENJO ...

Estimation of Seasonal Efficiency of Sochi Resort Climate Therapy by Means of Psychologic Testing of Patients with Cardiometabolic Pathology

Directory of Open Access Journals (Sweden)

Irina N. Sorochinskaya

2012-11-01

Full Text Available Cardiovascular diseases are major reasons for population mortality in majority of countries, including Russia. Metabolic syndrome is considered to be one of the main pathologic states, leading to enhancement of atherogenesis, ischemic heart diseases and cerebrovascular diseases. Physical methods, including resort treatment play great role in metabolic syndrome prevention and treatment. Climate therapy depends on resort climate and season and is a major component of resort treatment. Psychological testing showed that combined resort treatment, using climate therapy of patients with stable effort angina at Sochi Health-resort is more efficient in autumn and of patients with metabolic syndrome in summer. The findings have been confirmed by clinic-functional indicators.

Anti-doping analyses at the Sochi Olympic and Paralympic Games 2014.

Science.gov (United States)

Sobolevsky, Tim; Krotov, Grigory; Dikunets, Marina; Nikitina, Maria; Mochalova, Elena; Rodchenkov, Grigory

2014-01-01

The laboratory anti-doping services during XXII Winter Olympic and XI Paralympic games in Sochi in 2014 were provided by a satellite laboratory facility located within the strictly secured Olympic Park. This laboratory, established and operated by the personnel of Antidoping Center, Moscow, has been authorized by the World Anti-Doping Agency (WADA) to conduct doping control analyses. The 4-floor building accommodated the most advanced analytical instrumentation and became a place of attraction for more than 50 Russian specialists and 25 foreign experts, including independent observers. In total, 2134 urine and 479 blood samples were delivered to the laboratory and analyzed during the Olympic Games (OG), and 403 urine and 108 blood samples - during the Paralympic Games (PG). The number of erythropoietin tests requested in urine was 946 and 166 at the OG and PG, respectively. Though included in the test distribution plan, a growth hormone analysis was cancelled by the Organizing Committee just before the Games. Several adverse analytical findings have been reported including pseudoephedrine (1 case), methylhexaneamine (4 cases), trimetazidine (1 case), dehydrochloromethyltestosterone (1 case), clostebol (1 case), and a designer stimulant N-ethyl-1-phenylbutan-2-amine (1 case). Copyright © 2014 John Wiley & Sons, Ltd.

ACTIVITIES OF SAINT-PETERSBURG RESEARCH INSTITUTE OF RADIATION HYGIENE AFTER PROFESSOR P.V. RAMZAEV FOR PROVISION OF RADIATION SAFETY OF XXII WINTER OLYMPIC AND XI WINTER PARALYMPICS GAMES OF 2014 IN SOCHI CITY

Directory of Open Access Journals (Sweden)

I. K. Romanovich

2014-01-01

Full Text Available The article contains an analysis of the experience of Rospotrebnadzor radiological units’ activities for  radiation  safety  provision  of  the  participators  and  guests  of  XXII  Winter  Olympic  Games  in  Sochi  and  also of Sochi city inhabitants as during the period of preparations for the Games so during the period of the Olympic and Paralympics Games. Peculiarities of organization of activities of Rospotrebnadzor specialists are considered for  the  preparation  period  and  main  period,  the  occurred  problems  of  technical  and  methodical  provision  of radiation control which was carried out for the purpose of counteraction to possible actions of radiation terrorism are considered as well. The role is noted of the specialists of Radiation Hygiene Institute in the methodical and organizational provision of the whole complex of carried-out activities.

Sochi 2014 – Potential for conflict around the XXIIth Winter Olympics. eco.mont (Journal on Protected Mountain Areas Research)|eco.mont Vol. 3 No. 2 3 2|

OpenAIRE

Scharr, Kurt

2011-01-01

Our paper starts by sketching the historical and cultural background as well as characteristic features of the landscape around the venue of the 2014 Winter Olympics. It continues by pointing out spatial aspects of ecology, economy, demography and culture in the run-up to the olympics as well as the social tensions that have already emerged in this context and the potential for future conflict. Greater Sochi has a tradition as a spa and holiday destination that goes back to the foundation of ...

The incidence and patterns of illness at the Sochi 2014 Winter Paralympic Games: a prospective cohort study of 6564 athlete days.

Science.gov (United States)

Derman, W; Schwellnus, M P; Jordaan, E; Runciman, P; Van de Vliet, P; Blauwet, C; Webborn, N; Willick, S; Stomphorst, J

2016-09-01

To describe the epidemiology of illness at the Sochi 2014 Winter Paralympic Games. A total of 547 athletes from 45 countries were monitored daily for 12 days over the Sochi 2014 Winter Paralympic Games (6564 athlete days). Illness data were obtained daily from teams without their own medical support (13 teams, 37 athletes) and teams with their own medical support (32 teams, 510 athletes) through electronic data capturing systems. The total number of illnesses reported was 123, with an illness incidence rate (IR) of 18.7 per 1000 athlete days (95% CI 15.1% to 23.2%). The highest IR was reported for wheelchair curling (IR of 20.0 (95% CI 10.1% to 39.6%)). Illnesses in the respiratory system (IR of 5.6 (95% CI 3.8% to 8.0%)), eye and adnexa (IR of 2.7 (95% CI 1.7% to 4.4%)) and digestive system (IR of 2.4 (95% CI 1.4% to 4.2%)) were the most common. Older athletes (35-63 years) had a significantly higher IR than younger athletes (14-25 years, p=0.049). The results of this study indicate that Paralympic athletes report higher illness incidence rates compared to Olympic athletes at similar competitions. The highest rates of illness were reported for the respiratory and digestive systems, eye and adnexa, respectively. Thus, the results of this study form a basis for the identification of physiological systems at higher risk of illness, which can in turn inform illness prevention and management programmes with eventual policy change to promote athlete safety in future editions of the Winter Paralympic Games. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

High incidence of injury at the Sochi 2014 Winter Paralympic Games: a prospective cohort study of 6564 athlete days.

Science.gov (United States)

Derman, W; Schwellnus, M P; Jordaan, E; Runciman, P; Van de Vliet, P; Blauwet, C; Webborn, N; Willick, S; Stomphorst, J

2016-09-01

To describe the epidemiology of injuries at the Sochi 2014 Winter Paralympic Games. A total of 547 athletes from 45 countries were monitored daily for 12 days during the Sochi 2014 Winter Paralympic Games (6564 athlete days). Daily injury data were obtained from teams with their own medical support (32 teams, 510 athletes) and teams without their own medical support (13 teams, 37 athletes) through electronic data capturing systems. There were 174 total injuries reported, with an injury incidence rate (IR) of 26.5 per 1000 athlete days (95% CI 22.7% to 30.8%). There was a significantly higher IR recorded in alpine skiing/snowboarding (IR of 41.1 (95% CI 33.7% to 49.6%) p=0.0001) compared to cross-country skiing/biathlon, ice sledge hockey or wheelchair curling. Injuries in the shoulder region were the highest single-joint IR (IR of 6.4 (95% CI 4.6% to 8.6%)), although total upper and lower body IR were similar (IR 8.5 vs 8.4 (95% CI 6.4% to 11.1%)). Furthermore, the IR of acute injuries was significantly higher than other types of injury onset (IR of 17.8 (95% CI 14.7% to 21.4%)). In a Winter Paralympic Games setting, athletes report higher injury incidence than do Olympic athletes or athletes in a Summer Paralympic Games setting. The highest incidence of injury was reported in the alpine skiing/snowboarding sporting category. There was a similar incidence of injury in the upper and lower limbs. The joint with the greatest rate of injury reported was the shoulder joint. Our data can inform injury prevention programmes and policy considerations regarding athlete safety in future Winter Paralympic Games. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

[Catering for client groups during the XXII Olympic winter games and XI Paralympic winter games of 2014 in Sochi].

Science.gov (United States)

Popova, A Yu; Gus'kov, A S; Ivanov, G E; Chikina, L V; Klindukhov, V P; Nikolaevich, P N; Grechanaya, T V; Balaeva, M I; Vechernyaya, L S; Vechernyaya, E A; Bozhko, I I; Parkhomenko, V V; Kulichenko, O A; Tushina, O V; Manin, E A; Taran, T V

2016-01-01

The problems of catering control various client groups during the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in Sochi is one of the priorities of the sanitary and epidemiological welfare of the population during mass events. The data on the order of nutrition of guests and participants of the games, control of food items, sanitary and microbiological monitoring of drinking water, food raw materials and products are presented. It is noted that the ongoing supervisory activities contributed to the sanitary and epidemiological well-being during the Games. The purpose of this study was to lighting modern achievements in the field of nutrition and food microbiology in the period of the Olympic Games and the determination of their value to the further improvement and use at when conducting mass gatherings.

On the issue of drought-tolerant ornamental woody plants the Black Sea coast (near Sochi

Directory of Open Access Journals (Sweden)

Karpun Yuriy Nikolaevich

2017-12-01

Full Text Available The summer-autumn drought, when rainfall in July - September, less than 200 mm, a significant limiting factor for ornamental woody plants of the Black Sea coast of the Caucasus. In the region under dry periods are irregular, the study of their impact on plants is problematic and delayed for many years. The last drought was in 2015, when the three months fell only 87 mm of rainfall. In the last days of the dry period were examined 501 views and intraspecific taxa belonging to 112 genera, bushy evergreen shrubs and trees, as the most vulnerable. Evaluation of drought resistance was evaluated according to our 3-point system, and the results were analyzed in the context of consolidated floristic regions. The results showed adequate drought tolerance, not less than 65 %, cultivated in the region of evergreen shrubs and bushy trees mainly from East Asia and the Mediterranean. Among the species that are recommended for mass plantings, for the pre-emptive use of landscaping and street-resistant plants 67-80 %. All this ensures stability and high decorative plants ofSochi city.

[Improving prevention activities of infectious diseases during preparation and holding of the XXII Olympic Winter Games and XI Paralympic Winter Games 2014 in Sochi].

Science.gov (United States)

Onishchenko, G G; Bragina, I V; Ezhlova, E B; Demina, Iu V; Grechanaia, T V; Nikolaevich, P N; Balaeva, M I; Tesheva, S Ch; Biriukov, V A; Kulichenko, A N; Vasilenko, N F; Maletskaia, O V; Manin, E A; Orobeĭ, V G

2015-01-01

The article presents data on the implementation of a set of preventive activities to ensure sanitation and epidemiological welfare during the XXII Olympic Winter Games and XI Paralympic Winter Games 2014 in Sochi. The importance of monitoring and evaluation of epidemiological risk, as the basis of formation of preventive measures is noticed. The questions of specific, and nonspecific prevention of infectious diseases, especially the work done during the pre-Olympic period are considered. The importance of specifically developed regulatory basis, and health education are emphasized. The conclusion about the effectiveness of the measures taken, which led to a significant reduction of infectious diseases in the region is made.

RADIATION CONTROL DURING THE CONSTRUCTION OF THE OLYMPIC FACILITIES IN SOCHI CITY

Directory of Open Access Journals (Sweden)

I. K. Romanovich

2015-01-01

Full Text Available This paper presents data on the organization and results of the provision of the radiation safety in the period of preparation for the Winter Olympic and Paralympic games in Sochi, 2014. The following topics are overviewed in the paper: allocation of land plots for construction of the Olympic facilities; organization of the sanitary surveillance of the imported equipment, construction materials and designs for the construction of the Olympic facilities; putting the Olympic venues into operation. Dose rate of gamma radiation at all land plots, which were allocated for the construction of the Olympic facilities, conformed to the requirements of sanitary regulations. The average dose rate of gamma radiation was 0.11 μSv h-1 in the Coastal cluster and 0.14 μSv h-1 in the Mountain cluster. The radon fluence rate from the ground surface exceeded the prescribed limit of 80 mBq m-2 s-1 only at the land plot allocated for construction of the «House of receiving official delegations «Achipse» and the «House of receiving official delegations «Psekhako» in the Mountain cluster. The maximal value of 188 mBq m-2 s -1 was registered here. The buildings projects for this area included using radon protection measures, which were implemented during the construction.

EL JUEGO ESTRATÉGICO DE RUSIA EN EL CÁUCASO SUR: SOCHI 2014

Directory of Open Access Journals (Sweden)

Stella Maris Shmite

2016-01-01

Full Text Available La propuesta de la ciudad de Sochi como sede de los Juegos Olímpicos de Invierno y de la 16° fecha del Gran Premio de Fórmula 1 de 2014, y como una de las sedes de la futura Copa Mundial de Futbol 2018, son una ratificación de la importancia estratégica que representa el Cáucaso para Rusia. Asimismo, el anclaje en el Cáucaso y en las costas del Mar Negro, con toda la inversión en infraestructura y en segu - ridad que representa la organización de eventos deportivos mundiales, implica la puesta en juego de una estrategia geopolítica que expresa la importancia de Rusia como potencia regional. En el calidoscopio de poder e intereses que se despliegan en la región caucásica, la sombra de Rusia se proyecta con fuerza. Abordar el rol que ejerce este país en el Cáucaso Sur, permitirá comprender las perspectivas actuales de la política exterior de Rusia en esta región, así como conocer de qué modo se despliega en el territorio el juego estratégico del poder a través de eventos deportivos que se observan desde todos los lugares del mundo.

[ORGANIZATION OF THE QUALITY CONTROL OF PLACEMENT AND ACCOMMODATION OF PARTICIPANTS ATTENDANTS AND GUESTS OF THE XXII OLYMPIC WINTER GAMES AND XI PARALYMPIC WINTER GAMES OF 2014 IN THE RESORT CITY OF SOCHI].

Science.gov (United States)

Gorskiĭ, A A; Gus'kov, A S; Pochtareva, E S; Klindukhov, V P; Nikolaevich, P N; Grechanaia, T V; Vechemyaia, E A; Biriukov, V A; Bozhko, I I; Kulichenko, A N; Taran, T V; Zaĭtsev, A A; Tushina, O V

2015-01-01

There is presented the analysis of activities of the Federal Service for Supervision of Consumer Rights protection and Human Welfare to ensure adequate conditions of accommodation of the participants, attendants and guests of the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in the Resort city of Sochi according to regulated requirements. There were detected ways of the strengthening the supervision for the quality of the accommodation during mass sports activities for the assurance of the rights for consumers.

Achievement report for fiscal 1998. Development of an industrial rinsing equipment of environmentally harmonizing type using an ultra critical fluid (the second year); 1998 nendo seika hokokusho. Chorinkai ryutai wo mochiita kankyo chowagata kogyo senjo sochi no kaihatsu (dai 2 nendo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project is intended for environment friendly and pollution-free rinsing by using an ultra critical fluid of CO2 being an atmospheric constituent. It also has a purpose of establishing a new rinsing method implemented by an ultra precision component machine and device using such features possessed by the ultra critical fluid as high permeability and disinfecting activities. It is further intended of developing, fabricating, and practically using a rinsing equipment that makes possible precision rinsing of mechanical, electronic, optical and aeronautical components. Using the results of experiments performed in the previous year as the base, discussions were given on the relationship between the two aspects of the hardware aspect such as equipment configuration and piping of the rinsing equipment and the software aspect such as operating conditions and procedures and the rising effect. As a result, a new rinsing equipment of solvent circulation type was proposed. The basic design software for the specific equipment was completed, and an experimental equipment was designed and fabricated under the clean specifications. The performance evaluation and verification experiments were finished in the end of fiscal 1998, and collection of fundamental data has begun. With regard to the rinsing evaluation method, qualitative and quantitative analyses were performed on the rinsing by using a surface shape measuring microscope and the infrared spectroscopy. (NEDO)

[FEATURES OF THE ORGANIZATION OF SANITARY-EPIDEMIOLOGICAL SURVEILLANCE DURING THE PERIOD OF PREPARATION AND HOSTING OF THE XXII OLYMPIC WINTER GAMES AND XI PARALYMPIC WINTER GAMES IN THE RESORT CITY OF SOCHI IN 2014].

Science.gov (United States)

Onishchenko, G G; Popova, A Iu; Kuzkin, B P; Guskova, A S; Ivanov, G E; Pakskina, N D; Klindukhov, V P; Nikolaevich, P N; Grechanaia, T V; Balaeva, M I; Biriukov, V A; Bozhko, I I; Tesheva, S Ch; Daragan, Iu G; Parkhomenko, V V; Rafeenko, G K; Kulichenko, A N; Manin, E A; Maletskaia, O V; Vasilenko, N F; Efremenko, D V; Orobeĭ, V G; Eldinova, V E; Pilikova, O M; Malaĭ, V I; Iunicheva, Iu V

2015-01-01

In the paper there are presented the basic principles of the organization of activities for the assurance ofthe sanitary- epidemiological welfare in the period ofpreparation and hosting of the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in the Resort City of Sochi. There are considered features of the organization ofepidemiological surveillance in the pre-Olympic period, the period of the games and the state of the morbidity rate in the region after the Olympics. There are presented data on certain directions of the work of organs and institutions of the Federal Service for Supervision of Consumer Rights Protection and Human Welfare on the disease control of the event.

Medical Care Before and During the Winter Paralympic Games in Turin 2006, Vancouver 2010 and Sochi 2014.

Science.gov (United States)

Gawroński, Wojciech; Sobiecka, Joanna

2015-11-22

Medical care in disabled sports is crucial both as prophylaxis and as ongoing medical intervention. The aim of this paper was to present changes in the quality of medical care over the consecutive Paralympic Games (PG). The study encompassed 31 paralympians: Turin (11), Vancouver (12), and Sochi (8) competing in cross-country skiing, alpine skiing, biathlon and snowboarding. The first, questionnaire-based, part of the study was conducted in Poland before the PG. The athletes assessed the quality of care provided by physicians, physiologists, dieticians, and physiotherapists, as well as their cooperation with the massage therapist and the psychologist. The other part of the study concerned the athletes' health before leaving for the PG, as well as their diseases and injuries during the PG. The quality of medical care was poor before the 2006 PG, but satisfactory before the subsequent PG. Only few athletes made use of psychological support, assessing it as poor before the 2006 PG and satisfactory before the 2010 and 2014 PG. The athletes' health condition was good during all PG. The health status of cross-country skiers was confirmed by a medical fitness certificate before all PG, while that of alpine skiers only before the 2014 PG. There were no serious diseases; training injuries precluded two athletes from participation. The quality of medical care before the PG was poor, however, became satisfactory during the actual PG. The resulting ad hoc pattern deviates from the accepted standards in medical care in disabled sports.

Sexual Orientation, Human Rights, and Corporate Sponsorship of the Sochi Olympic Games: Rethinking the Voluntary Approach to Corporate Social Responsibility

Directory of Open Access Journals (Sweden)

Jeffrey A Van Detta

2014-02-01

Full Text Available Multi-national enterprises (MNEs have provided substantial sponsorship for the Sochi Winter Olympic Games despite a host-country government that has recently enacted stunningly harsh legislation aimed at the Lesbian, Gay, Bisexual, Transgender, and Intersex (LGBTI communities within Russia. This is a Corporate Social Responsibility (CSR problem. Should Europe address it through voluntary corporate compliance, Europe’s historically preferred mode of promoting CSR? Or should Europe reconsider whether it can more effectively promote CSR compliance legislatively – and if so, by what kind of legislation? To honor the explicit and increased protections of human rights against sexual orientation discrimination in the Treaty of Amsterdam and the Charter of Fundamental Human Rights, more than voluntary, good intentions are needed. Particularly since the United States has effectively bowed out of enforcing CSR through the American federal courts, there now exists a regulatory lacuna that the European Commission is best situated to fill through the precision offered by judicious rulemaking. The article ultimately proposes an approach that combines the public-pressure engine that fuels voluntary CSR with public disclosures mandated by law to optimize the information and mobilization of public opinion and pressure – factors particularly noteworthy given the powerful “branding” benefits that MNEs seek through Olympic sponsorship.

Medical Care Before and During the Winter Paralympic Games in Turin 2006, Vancouver 2010 and Sochi 2014

Directory of Open Access Journals (Sweden)

Gawroński Wojciech

2015-12-01

Full Text Available Medical care in disabled sports is crucial both as prophylaxis and as ongoing medical intervention. The aim of this paper was to present changes in the quality of medical care over the consecutive Paralympic Games (PG. The study encompassed 31 paralympians: Turin (11, Vancouver (12, and Sochi (8 competing in cross-country skiing, alpine skiing, biathlon and snowboarding. The first, questionnaire-based, part of the study was conducted in Poland before the PG. The athletes assessed the quality of care provided by physicians, physiologists, dieticians, and physiotherapists, as well as their cooperation with the massage therapist and the psychologist. The other part of the study concerned the athletes’ health before leaving for the PG, as well as their diseases and injuries during the PG. The quality of medical care was poor before the 2006 PG, but satisfactory before the subsequent PG. Only few athletes made use of psychological support, assessing it as poor before the 2006 PG and satisfactory before the 2010 and 2014 PG. The athletes’ health condition was good during all PG. The health status of cross-country skiers was confirmed by a medical fitness certificate before all PG, while that of alpine skiers only before the 2014 PG. There were no serious diseases; training injuries precluded two athletes from participation. The quality of medical care before the PG was poor, however, became satisfactory during the actual PG. The resulting ad hoc pattern deviates from the accepted standards in medical care in disabled sports.

[Epidemiological risk of introduction of dangerous and exotic infectious diseases on the territory of the XXII Olympic Winter Games and XI Paralympic Winter Games 2014 in Sochi].

Science.gov (United States)

Kuz'kin, B P; Ezhlova, E B; Kulichenko, A N; Maletskaia, O V; Demina, Iu V; Taran, T V; Pakskina, N D; Kharchenko, T V; Grizhebovskiĭ, G M; Savel'ev, V N; Orobeĭ, V G; Klindukhov, V P; Grechanaia, T V; Tesheva, S Ch; Brukhanova, G D

2015-01-01

To assess the epidemiological risk of introduction of serious infectious diseases in the pre-Olympic period defined list of dangerous and exotic infections and held assessment of potential danger threatening. Initial external information to assess the potential risk of skidding were reports, forecasts, posted on the official websites. The risk of skidding and epidemiological complications conditionally designated as high, moderate and minimal risk importation of measles virus-Rate was considered as high. In confirmation of the forecast for the period of the Olympic Games in Sochi have been registered about 100 cases of measles. Moderate risk of importation was determined for poliomyelitis due to wild poliovirus, Lassa fever, cholera, plague, and the minimal--for Dengue fever, yellow fever, the Middle East and respiratory syndrome, diseases caused by viruses Marburg and Ebola. Based on of analysis of previous Olympic Games and subsequent co-events related to the activity of the infectious diseases in the world, mate-cluded that even a slight risk of importation of infectious diseases requires maximum alertness and readiness to conduct adequate epidemiological issues incorporated.

Travel Distance and Transformation of Injected Emulsified Zerovalent Iron Nanoparticles in the Subsurface During Two and Half Years

Science.gov (United States)

Nanoscale zerovalent iron (NZVI) such as Toda Kogyo RNIP-10DS has been used for site remediation, yet information is lacking regarding how far injected NZVI can travel, how long it lasts, and how it transforms to other minerals in a groundwater system. Previously we reported effe...

Sports injury and illness epidemiology: Great Britain Olympic Team (TeamGB) surveillance during the Sochi 2014 Winter Olympic Games.

Science.gov (United States)

Palmer-Green, Debbie; Elliott, Niall

2015-01-01

Sports injury and illness surveillance is the first step in injury and illness prevention, and is important for the protection of both athlete health and performance in major competitions. To identify the prevalence, severity nature and causes of athlete injuries and illnesses in the Great Britain Olympic Team (TeamGB) during the Sochi 2014 Winter Olympic Games. The observational prospective cohort study followed the Great Britain Injury/Illness Performance Project surveillance methodology and obtained information on injuries and illnesses that occurred during the Games between 30 January and 23 February 2014 in TeamGB athletes (n=56). Among the 56 TeamGB athletes, there were 27 injuries and 11 illnesses during the Olympic Games period. This equated to 39% sustaining at least one injury and 18% at least one illness, with an incidence of 48.2 injuries and 19.6 illnesses per 100 athletes, respectively. Of all injuries and illnesses, 9% and 7%, respectively, resulted in time loss. The risk of sustaining an injury was highest for freestyle skiing, skeleton and snowboarding; and lowest for curling, biathlon and Alpine skiing (with no reported injuries); with the lower limb being the most commonly injured location. Respiratory system illnesses were most frequently reported overall, and older female athletes were the ones most affected by illness. The risk of injury was double the risk of illness for TeamGB athletes. Overall, the rate of time-loss issues was low. Methodological considerations are important when interpreting data, and prevention strategies should focus on those issues causing the greatest risk, in terms of prevalence and severity, to athlete health and performance. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium on energy research in its 3rd year (Development of an environmentally-friendly industrial cleaning system using supercritical CO2 fluid); 1999 nendo chorinkai ryutai wo mochiita kankyo chowagata kogyo senjo sochi no kaihatsu seika hokokusho. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In high-technology industries such as the semiconductor industry, cleaning operations are indispensable. In these industries, replacement of the current method with a new one has become an urgent matter, thanks to the new control imposed on pollutant CFC (chlorofluorocarbon). Using a supercritical fluid, whose density and other features may be regulated extensively and continuously by controlling temperature and pressure, various conditions may be set in detail for the cleaning element, such as the dissolving power, dispersion force, surface activity, and chemical reactivity. The fluid is environmentally friendly and free of pollution. Facilities for recovering, regenerating, and circulating the solvent are incorporated into a test cleaner built in the preceding fiscal year, and a new system is completed. The system is operated in a test run for performance assessment, and data are collected to specify cleaning conditions best for each kind of the target items. Studies are made to expand the scope of system application for use under supercritical conditions. An experiment is conducted using a pollutant model, and a method to analyze the degree of cleaning is studied using an effective diffusion coefficient. A self-cleaning method is studied for the filter for the regeneration of the supercritical cleaning solvent. A market research is carried out for the commercialization of the industrial cleaning system. (NEDO)

Analyzing the Rationales Behind Russia’s Intervention in Ukraine

Science.gov (United States)

2016-03-01

so that they can pounce when opportunity knocks .”69 Kimberly Marten also emphasizes Putin’s opportunism, but finds the analogy of judo more apt...games as an effort to build “a peaceful and better world through sport and the Olympic ideal.”316 In this respect, Sochi’s selection as the host city...Sochi Games Held Up as a Symbol of Olympic Extravagance and Waste,” The Guardian, February 5, 2014, http://www.theguardian.com/ sport /2014/feb/05/sochi

The Activities of the Armenian partiesDashnaktsutyun and Gnchak on the territory of the Black Sea Province at the beginning of the XX century

Directory of Open Access Journals (Sweden)

Konstantin V. Taran

2017-03-01

Full Text Available The article discusses the activities of the armenian parties Dashnaktsutyun and Gnchak on the territory of the Black sea province at the beginning of the XX century. The article is paid attention to the reasons of participation of armenians in the revolutionary events of 1905–1907. The authors have selected as materials the archival documents of the central and regional archives, namely the state archive of Russian Federation, the Russian State Archive of Social and Political History, the state archive of the Krasnodar Krai, a documentation center of the modern history of the Krasnodar Krai, the archive department ofSochi city and the museum of Sochi history. The authors come to the conclusion thatdespite the existing problems in relations with the armenian population of the Black sea province until 1905, the armenians are forced to participate in the riots of the First russian Revolution. Later, during the investigation of the Sochi republic that has been established, and the Armenian population avoidedthe criminal liability.

Review of Battery Technologies for Military Land Vehicles

Science.gov (United States)

2017-01-01

to their incompatible voltage window18 [10]. 5.3.1.3 Lithium Nickel Cobalt Aluminium Oxide ( NCA ) Batteries The NCA cathode (basic chemical...energy (175- 240 Wh/kg). However, Li-ion batteries using NCA cathodes have poor safety properties, similar to Li-ion batteries using LCO cathodes [1...Li-ion batteries using NCA cathodes are available commercially and manufacturers of NCA batteries include Toda Kogyo and BTR New Materials [1

Japan Report, Science and Technology.

Science.gov (United States)

1986-12-15

of Km to one-one hundredth and consequent 25 time rise of the enzyme activity. It is well known that the archetype cancer gene of the vertebrate, C-Ha... glyphosate (N-phosphornomethylglycine), a herbicide used in a wide range against Salmonella typhimirium, weeds, grains, etc. -- the gene aro holds...same university, the Pharmacological Department of Hokkaido University, the Kyowa Hakko Kogyo Corp., and the National Cancer Center; they are pressing

Encyclopedia of Explosives and Related Items. Volume 6

Science.gov (United States)

1974-01-01

TNT, NS, or smokeless powder , perhpas a soluble organic fuel such.as sugar, urea glycol, and frequently a natural gum thick- Explosives Sensitivity...detonation of solid expls) TNT, and thickened with guar gum , sodium 71) L. Deffet, Explosifs 13, 103 (1960) and CMC or sodium alginate) Explosivstoffe 12...The most common agent tartrate were effective) is a gum , such as guar gum . The gelling 95) Y. Matsuguma et al, KogyoKayaku 33(4), agent serves two

JPRS Report, Science & Technology Japan.

Science.gov (United States)

1989-07-11

JOURNAL OF THE JAPANESE ASSOCIATION OF CRYSTAL GROWTH, 10 Jul 88] 33 Fast Diamond Film Synthesis by Arc Discharge [ Fumio Akatsuka, Yoichi Hirose, et...Japanese 10 Jul 88 p 60 [Article by Fumio Akatsuka and Yoichi Hirose, Nihon Kogyo Daigaku: "High- Speed Synthesis of Diamond Thin Film by Arc...RCSPCNCF «N*l r-t»cii*i(OH Figure 5. Response Component Strength References 1. Manahu Kasai , "Subsystem Recovery by DMAP of Broad-Sense CMS of

The Outskirts during the First Russian Revolution (1905–1907 years: the Separatist Moods among the Population of the Black Sea Province

Directory of Open Access Journals (Sweden)

Konstantin V. Taran

2016-06-01

Full Text Available The article discusses the separatist moods among the Georgian population of the Black sea province. The attention is paid to the attempts of the georgian social-democrats to separate the Sochi district from the Russian Empire in 1905–1907 years. Among the materials are the archival documents of central and regional archives, namely the state archive of the Russian Federation, state archive of the Krasnodar Krai, the documentation center of contemporary history of Krasnodar Krai, the archival departments of Sochi administration and the historical museum of Sochi. The methodological basis of work based on the principles of objectivity and historicism, suggesting an unbiased approach to the analysis of the studied problems, as well as the critical attitude towards the sources. In conclusion, the authors stated that the social democrats used various methods of dealing with the existing regime, such as the destabilization of public-political situation, expressed in discrediting the Russian administration, provoking ethnic conflicts, the elimination of competitors in wage employment in the trade, physical violence against undesirable persons, the bullying of political opponents, taking money from the haves of the population, and collectively, the escalation of social tensions that eventually led to an armed clash with the authorities.

Wastes disposal on board a ship. Crushing and volume reducing apparatus for combustible and non-combustible refuses; Senjo no haikibutsu shori. Kanen funen gomi no hasai gen`yo shori sochi

Energy Technology Data Exchange (ETDEWEB)

Kishida, Y. [Hitachi Zosen Corp., Osaka (Japan)

1996-07-25

This paper introduces a refuse crushing apparatus to reduce for storage the volume of refuses produced on board a ship by crushing. Refuses to be crushed are solid wastes including solid combustible refuses such as paper, wood pieces, and cloths, non-combustible refuses such as empty cans, metals and glass, and refuses unsuitable for combustion, such as plastics and stylofoam. Crushing methods include impact system, compression system and shearing system. The shearing system shears and crushes refuses by using blades rotating at a low speed. The system has a wide range of crush ability and excellent versatility, generates low levels of dust, noise and vibration, and is suitable as a marine use refuse disposing apparatus. However, empty cans and PET bottles are more difficult of getting into cutting blades requiring a large amount of time for crushing. Therefore, it is more suitable to reduce volume of refuses by using a compressor or the like apparatuses, and then crush them by using a double-axial shearing crusher. Stylofoam causes its crushed pieces to be electrically charged and deposited onto the apparatus, hence it is more suitable to reduce the volume of refuses and make them brittle by heating, and then crush them by using the double-axial crusher. 2 figs.

PUBLIC-PRIVATE PARTNERSHIP AS EFFECTIVE MECHANISM OF SPORTS INFRASTRUCTURE

Directory of Open Access Journals (Sweden)

D. P. Moskvin

2012-01-01

Full Text Available The article discusses the current state of sports infrastructure in Russia and also explores the experience of using public-private partnership at Olympic facilities construction in Sochi.

Italian business in Krasnodar region

Directory of Open Access Journals (Sweden)

Artur M. Akopyan

2011-05-01

Full Text Available The article concerns Russia’s international cooperation with foreign countries, particularly Italy and Sochi relations. Institute of Chambers of Commerce and Industry plays significant role in process internalization.

PROSPECTS OF REGIONAL NETWORK STRUCTURES IN THE SOUTHERN FEDERAL DISTRICT

Directory of Open Access Journals (Sweden)

I. V. Morozov

2014-01-01

Full Text Available The article reveals the possibility of the Southern Federal District to form regional network structures. The prospects for the formation of networks in the region in relation to the Olympic Winter Games Sochi 2014.

Estimates of tsunami damage for Russian coast of the Black Sea

Science.gov (United States)

Zaytsev, Andrey; Yalciner, Ahmet; Pelinovsky, Efim

2010-05-01

The historic database of tsunamis in the Black Sea contains 20 - 30 events with different level of validity, and at least six events occurred in 20th century. Numerical modeling of the last historic events is performed in the framework of shallow-water theory with use of code NAMI-DANCE. The computed tide-gauge records in Russian coastal locations are in good agreement with instrumental data for the 1939 and 1966 tsunamis. The tsunami of the landslide origin occurred in Sochi in 1970 is modeled in the framework of the two-layer model realized in TUNAMI. Also, some hypothetic tsunamis generated in the open part of the Black Sea are computed and the distribution of the tsunami height along the Russian and Turkish coast ais found. In particular, the tsunami amplification near Sochi is highest to compare with other coastal locations on the Russian coast of Black Sea.

Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field / Development of an environmentally friendly industrial cleaning system using near-critical and supercritical carbon dioxide (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / chorinkai ryutai wo mochiita kankyo chowagata kogyo senjo sochi no kaihatsu (daiichi nendo) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In the manufacturing process of semiconductors and in the high tech industry, cleaning is indispensable. At present, when regulation of the use of CFC which used to be much used has been decided on, the conversion to the use of substitutes for CFC cleaning is urgently needed. Transfer to cleaning by water/alcohol/hydrocarbon has been proceeded with, but there are a lot of problems. Out of the development of the cleaning method using supercritical fluid, the paper described the fiscal 1997 result. As to enhancement of efficiency and decrease in size of equipment, a cleaning experiment by high pressure CO2 around the critical point was conducted by integrating nozzle, ultrasonic generator and cavitation generator and adding solvent circulating system. Multi-purpose and energy saving of the equipment were also studied. To establish an analysis method for the cleaning degree, the contaminated component film of trace organic matter with a specified thickness was formed on the silicon wafer, and using the Fourier transform ultrared spectroscopy, a method to determine the film thickness was studied. For the function evaluation for precision machine parts and determination of optimum cleaning conditions, the cleaning/degreasing process of valves were compared with the conventional method. For the product manufacturing, the paper investigated and prepared the data in Japan and from abroad. 55 refs., 79 figs., 18 tabs.

Brief history of the development of the Subtropical Botanical Garden of the Kuban

Directory of Open Access Journals (Sweden)

Karpun Yuriy Nikolaevich

2017-12-01

Full Text Available A retrospective report of the Director of the Subtropical Botanical Garden of Kuban, Karpun YN, at the opening of the First National Dendrological Conference, dedicated to the 40th anniversary of the Garden, held on March 14-16, 2017 in Sochi

"Andere Räume": sowjetische Kurorte als Heterotopien. Das Beispiel Sotschi

NARCIS (Netherlands)

Noack, C.; Schlögel, K.

2011-01-01

Based on Foucault's 'Of other places' the chapter discusses the changing spatialand symbolic relations of Soviet cities and he~lth resorts. The study focuses on Sochi: This Black Sea resort, of little importance before the revolution, became the preferred object of Stalinist development plans in the

78 FR 66989 - Designation of Six Individuals and Four Entities Pursuant to Executive Order 13581, “Blocking...

Science.gov (United States)

2013-11-07

...). The Order was effective at 12:01 a.m. eastern daylight time on July 25, 2011. In the Order, the.... ``GRISHA''), Phuket, Thailand; DOB 16 Jul 1962; POB Sochi, Russia (individual) [TCO]. 3. LYALIN, Vadim... Marine Tower, P.O. Box 1102, Dubai, United Arab Emirates; DOB 30 Sep 1973; Passport 4510935440 (Russia...

Negativ

OpenAIRE

Videmanová, Marie

2017-01-01

Inspirace k této soše vznikala postupně ze zkušeností z předchozí tvorby. Měla jsem oblibu ve spících lidech, v sochách lidských těl v životní velikosti. Tyto sochy jsem různou manipulací deformovala, přetvářela a tím je dostávala do nereálných poloh. Tyto změny umožnily do soch nahlížet, nahlížet do jejich snů. Sochy pak působily jako svaté výjevy z kostelů. Normální poloha spícího člověka se při otočení změnila v jakési gesto. Při této tvorbě série spících lidí, se mi během odlévání živých ...

Full speed ahead!

CERN Multimedia

Anaïs Schaeffer

2014-01-01

When he’s not working at CERN, Jean-Yves Le Meur is a top-level skier. Fresh from the Winter Paralympics in Sochi and the French disability snowsport championship, he has agreed to answer a few questions.   Jean-Yves tackles a giant slalom. Image: @FFH. Few athletes can boast of having participated in the Olympic or Paralympic Games even once in their sporting career, let alone four times... But Jean-Yves Le Meur, a member of both CERN’s IT-CIS Group and the French disabled ski team, tells me modestly during our interview that this is what he has achieved. While the skier might act like it’s no big deal, it leaves me, amateur sportsperson that I am, dumbfounded. A few weeks ago in Sochi, the sun shining a little too brightly, Jean-Yves left his fourth Paralympics with the same enthusiasm he had for the previous three, and the same bitter taste in his mouth: “Just like in the 2010 Winter Paralympics in Vancouver, I failed to finish the sitting slalom, d...

CMS Virtual Visit from Russia - 16 November 2015

CERN Multimedia

Belotelov, Ivan

2016-01-01

This event gathered 200+ high school students selected from all over Russia from three places: - high school students from "Experimental Physics Olympics" at Sirius center, Sochi - students from European Gymnasium, Moscow - interested people at "White leaf" lecturing space Pictures show the CMS Virtual Visit, preparation lecture and masterclass activity. CMS Guides for the Virtual Visit: Nikolay Voytishin & Alexey Kamenev

‘Sochi’ resort development and functioning in 1935–1950

Directory of Open Access Journals (Sweden)

Vladimir G. Ivantsov

2011-06-01

Full Text Available The article is focused on the history of ‘Sochi’ rest home establishment and functioning. Later ‘Sochi’ was turned into resort and was included into Sochi group of resorts, first under the supervision of USSR Central Executive Committee and in 1938 it passed into jurisdiction of USSR Council of People's Commissars – USSR Council of Ministers.

The healthcare system in the Caucasus at the beginning of the XX century: the development features

Directory of Open Access Journals (Sweden)

Tatiana E. Gvarliani

2016-03-01

Full Text Available The article based on the archival material deals with the healthcare system in the Caucasus at the beginning of the XX century. In writing this article, the authors made use of reports from national archives of Georgia (Tbilisi, Georgia, the archival department of administration of Sochi (Sochi, Russian Federation. There is given the statistics from the works of Russian and foreign authors, and also reference literature. The authors’ use of the principles of objectivity, historicism, systematic, the integrated consideration of socio-subjective in the subject of study and the maximum possible neutrality of the relationship of the researcher to interpret and evaluate the factual material. In conclusion, the authors stated that in the late of XIX – early XX centuries the healthcare system in the Caucasus has experienced a period of significant development. In this time, taking into account the regional peculiarities, there were developed the institutions of the health system, and have been taken measures of anti-epidemic struggle. Despite the difficulties of conducting the health activities in a multinational region the Russian administration managed to significantly reduce the number of patients in the Caucasus.

Is Hosting the Games Enough to Win? A predictive economic model of medal wins at 2014 Winter Olympics

OpenAIRE

Wladimir Andreff

2012-01-01

An econometric model which has first been estimated on medal wins at Summer Olympics and has predicted 88% of medal distribution at Beijing Games 2008, is revisited for Winter Olympics. After changing some variables to take into account the winter sports specificity, the model is estimated again on all Winter Games since 1964.Then it is used to predict (forecast) the medal distribution per country at the 2014 Sochi Winter Olympics.

Quality of Tourism and Hospitality Management Systems in Russia

Directory of Open Access Journals (Sweden)

Irina N. Markaryan

2013-01-01

Full Text Available This article describes the features of quality standards (ISO, their application in Russia, analyzes Quality Awards, awarded to Russian producers, such as the Award of the Government of the Russian Federation in the field of Quality, National Tourism Award named after Yu. Senkevich, Travel Award «Golden Meridian», Moscow “Guiding Star” Award. The objectives of management system for Sochi resorts and hotels were determined

Events

Directory of Open Access Journals (Sweden)

Igor V. Karyakin

2016-04-01

Full Text Available VII International Conference on research and conservation of raptors in North Eurasia will be hold in Sochi (Russia on the basis of the Sochi National Park in 19–24 September 2016. Annual Meeting of the Raptor Research Foundation will be hold in 16–20 October 2016 in the Cape May (New Jersey, USA supported by the New Jersey Audubon Society’s Cape May Bird Observatory. IV Neotropical Raptor Network Conference will be hold in La Fortuna (Costa Rica in 10th–13th October 2016. la Fundacion Rapaces Costa Rica. V World Owl Conference will be hold in Venaus (Italy in 22–26 March 2017. 4th International Peregrine Conference will be hold in Budapest (Hungary in 27 September – 1st October 2017. Webcams on nests of Goshawk (Accipiter gentilis and Tawny Owl (Strix aluco are installed in Nizhny Novgorod (Russia in 2016. Hour broadcast has been organized since April on the website of the Russian Raptor Research Network and on the website of the Ivideon company. The equipment and technical solutions from Ivideon. MTS has provided communication.

Cation exchange separation of 16 rare earth metals by microscale high-performance liquid chromatography

International Nuclear Information System (INIS)

Ishii, D.; Hirose, A.; Iwasaki, Y.

1978-01-01

The separation of rare earth metals has been studied with a microcolumn of 0.5 mm i.d. and 75 mm length, packed with TSK LS-212 high-performance cation exchange resin. A micro-feeder (Model MF-2, from Azumadenki Kogyo) was used to drive carrier and sample solutions through the ion exchange column and detection cell. By combining a 250 μl syringe and a 0.5 mm i.d. sampling tube the micro-feeder, 0.1-1.0 μl rare earth metals were separated within 38 min, using only 304 μl of 0.4M α-hydroxy-isobutyric acid solution adjusted to pH 3.1-6.0 with ammonia solution as gradient carrier solution. The gradient elution was successfully performed by applying a new technique developed for microscale liquid chromatography. (author)

The Outskirts during the First Russian Revolution (1905–1907 years): the Separatist Moods among the Population of the Black Sea Province

OpenAIRE

Konstantin V. Taran; Andrei P. Mikhailov; Susanna D. Bagdasaryan

2016-01-01

The article discusses the separatist moods among the Georgian population of the Black sea province. The attention is paid to the attempts of the georgian social-democrats to separate the Sochi district from the Russian Empire in 1905–1907 years. Among the materials are the archival documents of central and regional archives, namely the state archive of the Russian Federation, state archive of the Krasnodar Krai, the documentation center of contemporary history of Krasnodar Krai, the archival ...

Russia and the olympic movement : a study of Russian national identity as described in the newspaper Sovetskij Sport during the winter olympic games of 1988, 1992, 1994, and in the future winter olympic games of 2014

OpenAIRE

Nikitin, Anna

2010-01-01

The topic of the thesis deals with Russia and the Olympic Movement, studying Russian national identity as it is described in the newspaper Sovetskij Sport during three past Winter Olympic Games (1988, 1992, 1994) and the upcoming Winter Olympic Games that take place in Sochi 2014 in the framework of international politics. The research task is to analyze, what kinds of discourses do the writings of Russian Olympic Committee’s leading sports journal Sovetskij Sport use in times of the above me...

[Modern methods application of genotyping of infectious diseases pathogens in the context of operational work of specialized anti-epidemic team during the XXII Olympic Winter Games and XI Paralympic Winter Games].

Science.gov (United States)

Kuzkin, B P; Kulichenko, A N; Volynkina, A S; Efremenko, D V; Kuznetsova, I V; Kotenev, E S; Lyamkin, G I; Kartsev, N N; Klindukhov, V P

2015-01-01

This paper considers the experience of genotyping and sequencing technologies in laboratories of specialized anti-epidemic team (SAET) during the XXII Olympic Winter Games and XI Paralympic Winter Games of 2014 in Sochi. The work carried out during the pre-Olympic period on performance of readiness by SAET for these studies is analyzed. The results of genotyping strains of pathogens during the Olympic Games are presented. A conclusion about the effectiveness of the use of molecular genetic techniques in terms of SAET is made.

Distribution of pollutants in the Russian sector of the Black Sea coastal zone

International Nuclear Information System (INIS)

Kos'yan, R.D.; Yesin, N.V.

1999-01-01

For the latest 30-40 years the Black Sea pollution by various pollutants is observed. It is the result of economical activity intensification on the shore and of slow growth of cleaning system capacity. In the coastal zone concentration of pollutants depends on the pollutant amount brought from the source and the process of their distribution and transport to the open sea. Within the Krasnodar region towns of Novorossiisk, Gelendzhik, Tuapse, Sochi and the ports of Novorossiisk and Tuapse are the main sources of pollutants

Water saving in IC wafer washing process; IC wafer senjo deno sessui taisaku

Energy Technology Data Exchange (ETDEWEB)

Harada, H. [Mitsubishi Corp., Tokyo (Japan); Araki, M.; Nakazawa, T.

1997-11-30

This paper reports features of a wafer washing technology, a new IC wafer washing process, its pure water saving effect, and a `QC washing` which has pure water saving effect in the wafer washing. Wafer washing processes generally include the SC1 process (using ammonia + hydrogen peroxide aqueous solution) purposed for removing contamination due to ultrafine particles, the SC2 process (using hydrochloric acid + hydrogen peroxide aqueous solution) purposed for removing contamination due to heavy metals, the piranha washing process (using hot sulfuric acid + hydrogen peroxide aqueous solution) purposed for removing contamination due to organic matters, and the DHF (using dilute hydrofluoric acid) purposed for removing natural oxide films. Natural oxide films are now remained as surface protection films, by which surface contamination has been reduced remarkably. A high-temperature washing chemical circulating and filtering technology developed in Japan has brought about a reform in wafer washing processes having been used previously. Spin washing is used as a water saving measure, in which washing chemicals or pure water are sprayed onto one each of wafers which is spin-rotated, allowing washing and rinsing to be made with small amount of washing chemicals and pure water. The QC washing is a method to replace tank interior with pure was as quick as possible in order to increase the rinsing effect. 7 refs., 5 figs.

Cleaning and sterilization in biotechnological clean system. Biotechnological clean system no senjo sakkin

Energy Technology Data Exchange (ETDEWEB)

Inoue, M.

1994-02-20

Despite their usefulness for mankind, many of microorganisms are generally emphasized of the aspect of their harmfulness as decomposable and pathogenic microorganisms, apt to implant people with wrong preconception. Moreover, the food industries have a habitual practice that they leave unexpectedly unclean conditions unattended. This paper indicates such actual circumstances by quoting various examples, and introduces characteristics and test results on commercially available chemicals having excellent cleansing and sterilizing effects. High-pressure and high-temperature sterilization processes fit the purpose of preservation, but secondary contamination may occur in subsequent processing, for example, from the ceiling and walls of a work room, or operators' fingers. Problems exist there that should be considered in biotechnological clean systems. Technologies have been advanced that mix a small amount of chemicals into plastic sheets, wall materials, and floor materials so that their surfaces are kept away from growth of microorganisms for extended periods of time. About 300 kinds of chemicals have been developed, and are available commercially. 3 refs., 8 figs.

Japanese aquaculture with thermal water from power plants

International Nuclear Information System (INIS)

Kuroda, T.

1977-01-01

The present level of thermal aquaculture, utilizing thermal water which is waste cooling water from nuclear power plant, in Japan is reported. There are 13 major potential areas for thermal aquaculture in cooperation with conventional type thermal power plants, seven of which are actually operating. Aquaculture facilities of all these are on land, none in the sea. Of these seven centers, those that have already commercialized their nursery methods or are approaching that stage of research and development, are Tohoku Hatsuden Kogyo Ltd., Tsuruga Hama Land Ltd. and Kyushu Rinsan Ltd. Major problems faced specialists in Japanese thermal aquaculture are water temperature, water quality, radioactivity and costs. For keeping the water temperature constant all seasons, cooling or heating by natural sea water may be used. Even negligible amounts of radioactivity that nuclear power plants release into the sea will concentrate in the systems of marine life. A strict precautionary checking routine is used to detect radioactivity in marine life. (Kobatake, H.)

The Cumulative Impact of International Motor Racing Running on the Regional Entrepreneurial Development in the Case of Krasnodar Region

Directory of Open Access Journals (Sweden)

Andrey B. Ilin

2017-01-01

Full Text Available Purpose: the purpose of this paper is to identify the effects from holding the world championship "Formula One" on the territory of Krasnodar Krai on regional nationwide scales. Methods: the methodological framework of this paper comprises: content analysis, public analysis findings in the sphere of sports business organizations development, empirical and sociological (enumeration methods. Results: in this regard, the author of this paper identifies a multiplicative effect from the operation of a global company "Formula One" in Russia through the prism of fashion, social, economic, industrial, infrastructure, investment and integration effects. This allows to draw a conclusion that "Formula One" in Russia as a sports and entertainment mega-event leads to the development of the national economy through small and medium business over race service and arrangement (recreation, hotel complex, restaurants, cafes, entertainment complexes, shopping malls, transportation terminals, railway interchange, additional points in the airport and etc.. It is proved that Sochi profile as a world-famous resort encourages the emerging of additional businesses. These and other factors allow Sochi to solve the economic problem of the post-Olympic heritage. The effects of “Formula One” on nationwide and regional scales are represented by a diagrams. Conclusions and Relevance: practical implications of current paper lies in the justification of provisions and conclusions in order to understand the importance of "Formula One" stage in Russia, the need for its promotion and revitalization of economic entities interest to the territories development. 

Putin lends a hand as Rosatom goes on international offensive

International Nuclear Information System (INIS)

Dalton, David

2016-01-01

When Russian president Vladimir Putin played host at the recent Russia-ASEAN (Association of Southeast Asian Nations) summit in Sochi, where he hosted leaders of all 10 ASEAN countries, he took the opportunity to do some lobbying for state-owned nuclear corporation Rosatom, telling southeast Asian countries there that it was time to go nuclear. Rosatom sees the region as a source of potentially significant orders. Agreements recently signed typically set out plans to cooperate in the design, construction and operation of nuclear power plants and research reactors.

Putin lends a hand as Rosatom goes on international offensive

Energy Technology Data Exchange (ETDEWEB)

Dalton, David [NucNet, Brussels (Belgium)

2016-11-15

When Russian president Vladimir Putin played host at the recent Russia-ASEAN (Association of Southeast Asian Nations) summit in Sochi, where he hosted leaders of all 10 ASEAN countries, he took the opportunity to do some lobbying for state-owned nuclear corporation Rosatom, telling southeast Asian countries there that it was time to go nuclear. Rosatom sees the region as a source of potentially significant orders. Agreements recently signed typically set out plans to cooperate in the design, construction and operation of nuclear power plants and research reactors.

Resolution VII International Conference Working Group on Birds of Prey of Northern Eurasia “Birds of Prey of Northern Eurasia: Problems and Adaptation Under Modern Conditions”

Directory of Open Access Journals (Sweden)

Igor V. Karyakin

2017-01-01

Full Text Available From 19 to 24 September, 2016 VII International Conference of the Working Group on Raptors of Northern Eurasia “Birds of prey of Northern Eurasia: problems and adaptation under modern conditions” was held on the basis of the Sochi National Park. Materials for the conference were presented by 198 ornithologists from Russia, Ukraine, Belarus, Kazakhstan, Moldova, Turkmenistan, Austria, Great Britain, Hungary, Mongolia, Poland, Estonia and the USA, who published 148 articles in two collections “Birds of prey of Northern Eurasia” and “Palearctic Harriers”.

High resolution CSMT method for shallow structure; Senjo ochi ni okeru kobunkaino denjiho tansa

Energy Technology Data Exchange (ETDEWEB)

Yamane, K; Takasugi, S [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Inazaki, S [Geological Survey of Japan, Tsukuba (Japan); Sasaki, Y

1997-10-22

Electromagnetic exploration methods and seismic reflection methods are conducted for the study of applicability of geophysical exploration to shallow layer geological survey. In the study, four north-south traverse lines are set in 400mtimes200m grassland. Tensor type CSMT methods are employed, a CSMT method using 96kHz-1kHz artificial magnetic fields and an MT method using 1kHz-10kHz natural magnetic fields, for the determination of resistivity distribution in the ground. Distributed in the site are a surface layer composed of gravel-containing sand and silt, andesitic fractured lava, and massive andesite, and the exploration reaches several tens of meters below the surface. The results of CSMT measurements are found to be in agreement with reflection profiles acquired simultaneously with these CSMT measurements. It is found, furthermore, that CSMT profiles help identify reflection waveforms in a domain where reflection is obscure. It is also found that electromagnetic methods are effective in fault logging because they are very sensitive to porosity, or the amount of pore water, which is higher in a domain with subsurface cracks than in the neighborhood without cracks. 1 ref., 4 figs.

Analysis and scavenging effect of acid fog. Sanseimu no kagaku sosei to senjo koka

Energy Technology Data Exchange (ETDEWEB)

Igawa, M.; Hoka, E.; Hosono, T.; Iwase, K.; Nagashima, T. (Kanagawa University, Yokohama (Japan). Faculty of Engineering)

1991-05-10

Fog samples were collected for analysis at Mt. Ohyama, the east edge of Tanzawa Mountains in the southwest of Kanto plains. Then, rainwater and aerosol that becomes the core of droplet were analyzed and measured values were compared. As a result, the pH value of the fog samples for 2 years from 1988 to 1990 ranged between 2.6 and 7.0, and the mean pH value was 3.95. According to the measurement of major component concentration of fogwater, rainwater, and aerosol, it was found that concentration of fogwater changed significantly depending on the day but every ion concentration was higher than that of rainwater. The equivalent concentration ratio of sulfuric acid, nitric acid, and chloride ions were almost equal. The concentration value of fogwater varied a lot with the course of time and became higher during the formation and the dissipation of fog. Through the analysis of such changes, atmospheric scavenging effect of precipitation of fogwater upon the trees and the earth surface was observed. It means that pollutants with high concentration were loaded on the plants and the earth surface. 23 refs., 5 figs., 2 tabs.

CITY TRANSPORT IN BARRIER-FREE ARCHITECTURAL PLANNING SPACE FOR PEOPLE WITH LIMITED MOBILITY

Directory of Open Access Journals (Sweden)

Pryadko Igor’ Petrovich

2014-09-01

Full Text Available This paper reviews the current state of transport organization for people with limited mobility. The article evaluates the results of the actions the executive authorities of Moscow and Moscow Region take. Barrier-free space organization for disabled people and parents with prams is given a special attention. The lack of strategy in the sphere leads to considerable difficulties for people with limited ability. This problem should be solved in cooperation with the survey of other peoples' needs. The article gives examples of comfortable urban space in Sochi, Moscow, Chita, Mytishchi and analyses the ways urbanism influences people with limited abilities.

Development status of rotary engine at Toyo Kogyo. [for general aviation aircraft

Science.gov (United States)

Yamamoto, K.

1978-01-01

Progress in the development of rotary engines which use a thermal reactor as the primary part of the exhaust emission control system is reviewed. Possibilities of further improvements in fuel economy of future rotary engines are indicated.

Sochy na mostě v Přerově?

Czech Academy of Sciences Publication Activity Database

Hlobil, Ivo

2013-01-01

Roč. 12, č. 2 (2013), s. 7 ISSN N Institutional support: RVO:68378033 Keywords : contemporary sculpture * Přerov * influence of the Gothic tradition Subject RIV: AL - Art, Architecture, Cultural Heritage

Solar cell driving device. Taiyo denchi kudo sochi

Energy Technology Data Exchange (ETDEWEB)

Yamazaki, K [Shibaura Engineering Works Co. Ltd., Tokyo (Japan)

1991-01-24

In driving a motor by a solar cell, if the sun light is weak, the motor cannot be started because of the fact that the start-up current of the motor is more than the current needed for driving. In this invention, a current limiting circuit is placed between the solar cell and the load, whereby the current limitation by said limiting circuit is released when the detected voltage of the solar cell reached the value required for starting the load. The current limiting circuit uses a semiconductor element such as a thyrister and a transistor which general limits a current. Such a current limiting circuit is controlled by a voltage detecting circuit and is so constructed that the cell limitation is released when a specific preset volatge of the solar cell is reached. 2 figs.

Solar power generation system. Solar denryoku hassei sochi

Energy Technology Data Exchange (ETDEWEB)

Ohaku, T [Toshiba Corp., Kawasaki (Japan)

1990-12-21

In a conventional solar power generation system having shunt elements for controlling generated power and supplying the controlled power to a load, it is difficult to carry out a stable power control, because the shunt characteristics of an analogue shunt element driving circuit vary widely as compared with a digital shunt element driving circuit, as the temperature varies. According to the present invention, in a solar power generation system having a plurality of solar cells divided into two of the first and second cell groups and a first and a second shunt element driving means provided for the first and second cell groups, the first shunt element driving means is composed of a combination of a resisance and level shift diode arranged, and the second shunt element driving means is composed of a combination of a transistor and level shift diode arranged. A stable current control of the shunt elements can be therefore realized, because the control voltage range of the first and second shunt element driving means is changed so as to be expanded, as the temperature varies, so that their overlapped voltage range is kept constant. 7 figs.

Solar power generating device. Solar denryoku hassei sochi

Energy Technology Data Exchange (ETDEWEB)

Hayashi, E

1990-02-06

Concerning the existing solar power generating device using the analogue sequential partial shunt system, the number of interface line between the solar cell panel and the shunt dissipater is enormous and complicated in addition to the increased temperature rise of the shunt transistor in its working condition. Furthermore, concerning the digital sequential full shunt system, the above temperature rise becomes less, but the above number of interface line is likewise enormous. In order to remove the above defects, the solar power generating device which this invention concerns has the features that, in each row of solar cells connected to shunt transistors which are controlled respectively in a manner of on (saturation)/off independently in accordance with the amount of surplus electric power, the number of parallel connection of the unit cell circuits composing the each row above is made to be the different number respectively. Besides, it is proposed to have the feature in particular that such a number is made to be the number of 2 {sup n} (n is from zero to any integer, m) where n is increased by one progressively. 5 figs.

First international workshop on severe accidents and their consequences. [Chernobyl Accident

Energy Technology Data Exchange (ETDEWEB)

1989-07-01

An international workshop on past severe nuclear accidents and their consequences was held in Dagomys region of Sochi, USSR on October 30--November 3, 1989. The plan of this meeting was approved by the USSR Academy of Sciences and by the USSR State Committee of the Utilization of Atomic Energy. The meeting was held under the umbrella of the ANS-SNS agreement of cooperation. Topics covered include analysis of the Chernobyl accident, safety measures for RBMK type reactors and consequences of the Chernobyl accident including analysis of the ecological, genetic and psycho-social factors. Separate reports are processed separately for the data bases. (CBS)

Hydrocarbons in the suspended matter and the bottom sediments in different regions of the Black Sea Russian sector

Directory of Open Access Journals (Sweden)

I. A. Nemirovskaya

2017-08-01

Full Text Available Content and composition of hydrocarbons (mainly the aliphatic ones in the suspended matter and the bottom sediments in the Gelendzhik Bay, the Big Sochi water area, the Feodosiya Bay and the Black Sea central part are defined and compared with the total organic carbon and chlorophyll a contents. It is shown that the aliphatic hydrocarbon concentrations exceeding the background ones are found only in the coastal zone. Advancing to the pelagic zone is accompanied by sharp decrease of their concentrations. Petroleum and pyrogenic hydrocarbons are mainly manifested in the polycyclic aromatic hydrocarbons composition. Influence of construction of the Olympic facilities upon distribution of hydrocarbons in the Big Sochi water area was of short duration, and already by 2015 the aliphatic hydrocarbons concentration decreased, on the average, up to 24 µg/l in the surface waters, and up to 18 µg/g – in the bottom sediments. Accumulation of hydrocarbons took place in bottom sediments, where their concentrations exceeded the background ones in terms of dry weight. In the Gelendzhik Bay, their content reached 252 μg/g, and in the composition of organic carbon (Corg > 1 %, which may indicate the contamination of sediments with oil products. In the Feodosiya Bay their part in the composition of Corg did not exceed 0.73 % and was 0.35 % on average. Natural alkanes dominated in the composition of aliphatic hydrocarbons. The bottom sediments are characterized by the predominance of odd high-molecular terrigenous alkanes. The content of polycyclic aromatic hydrocarbons in the studied sediments was rather low: up to 31 ng/g in the Gelendzhik Bay, up to 348 ng/g in the Feodosiya Bay. These concentrations according to the EPA classification are considered background, or minor petroleum hydrocarbons increase the level of aliphatic hydrocarbons in water and sediments, thus creating a modern hydrocarbon background.

AN ESTIMATE OF THE CONTRIBUTION OF BUSINESS STRUCTURES OF MOTORSPORT IN THE FORMATION OF AN ATTRACTIVE IMAGE OF TERRITORY

Directory of Open Access Journals (Sweden)

A. B. Ilin

2016-01-01

Full Text Available The relevance of the topic chosen due to the modern event-state Olympic Park in Sochi, his post-Olympic legacy for the eff ective return of public investment. Currently, one of the operating entities of their own business in the city, the resort is a global company, "Formula 1", which has the contract to conduct the Grand Prix of Russia on the territory of "Sochi racetrack" from 2014 to 2020. with the right of prolongation. In this regard, the presented article deals with the general principles of assessing the contribution of business organizations in motorsport formation of an attractive image of the territory. The infl uence megasportivnyh activities on investment and social development of the foreign states. The main stages of preparation and holding of "Formula 1" as a basis for enhancing the use of the entrepreneurial potential of diff erent kinds of activities. We consider the entrepreneurial and institutional environment, "Formula 1" during the preparation, conduct and postpodgotovki Grand Prix of Russia. Graphically presented model the contribution of "Formula 1" at the macro, meso and micro levels of economic development.The purpose / goal. The aim of the article is to analyze the assessment of the impact of international business organizations in the field of sport, in particular the global company "Formula-1", to the national markets and refreshment area.Methodology. The methodological basis of this article are: content analysis of open analyzes of the development of sports business organizations, empirical and sociological (surveillance methods.Conclusions / relevance. The practical significance of the work lies in the justification of propositions and conclusions in order to understand the importance of the stage of "Formula 1" in Russia, the need for its promotion and revitalization of economic entities of interest to the development of the territories.

Events

Directory of Open Access Journals (Sweden)

Igor V. Karyakin

2015-12-01

Full Text Available In April 2015 a charity program “PROTECTED AREAS – LIFE SAVER” was launched for reserved areas and national parks in Russia and CIS countries. The project “Eagles of Russia” received the support of the Russian Geographical Society for the second time.  In 2015 in the Republic of Tatarstan 67 special protection forest areas (SPFA will be allotted in 17 administrative districts. Where there will be 41 areas for the protection of the Imperial Eagle (Aquila heliaca, 23 – for the White-Tailed Eagle (Haliaeetus albicilla and 3 – for the Greater Spotted Eagle (Aquila clanga. XIV International Ornithological Conference of Northern Eurasia was held in August 18–24, 2015 in Almaty, Kazakhstan, on the basis of Kazakh National University named after Al-Farabi (KNU. V International readings from Buturlin, dedicated to the memory of Sergei Buturlin a famous Russian ornithologist, were held in September 22–24,2015 inUlyanovsk. In 29–30 October 2015, the Interregional Conference “Raptor Research and Conservation. Legislative Issue” was held in Elista. The status of steppe eagle (Aquila nipalensis in the European Red List and IUCN Red List has changed. SochiNational Park, Southern Federal University, Menzbir Ornithological Society and the Working Group on birds of prey and owls of Northern Eurasia are planning to hold regular VII International Conference on research and conservation of raptors in North Eurasia inSochion the basis of theSochiNational Park. Excerpts from the Resolution Adopted at the XIV International Ornithological Conference ofNorth Eurasia. Date held: 18–22 August, 2015. Excerpts from the Resolution Adopted at the Interregional Conference “Raptor Research and Conservation. Legislative Issue”. Date held: 29–30 October, 2015.

Integrated electric circuit engineering system in LSI design center, Konami Kogyo Co. Ltd

Energy Technology Data Exchange (ETDEWEB)

Kamitsuki, Kagehiko; Tanaka, Tomiaki

1988-08-26

Development of the integrated engineering system is presented which designs and manufactures the hardwares, softwares and cases of electronic game products with LSI integratedly as an experiment. The system is intended to reduce the number of each development of the parts, to verify each other by comparing each parts with the product concept during the development, to reduce modifications, and to shorten development periods. The main subsystems are an electric circuit CAD for LSI designs and a mechanical CAD for case or printed circuit board designs. The LSI development period has been shortened up to one month by a larger capacity computer and higher speed simulator, and the electric circuit engineering system capable of keeping step with the software development has been approximately completed. In the future, the system will be intended to introduce an expert system or a visual system capable of predicting the final product during a logical design period. (10 figs, 1 photo)

Fuel cell heat utilization system; Nenryo denchi netsuriyo sochi

Energy Technology Data Exchange (ETDEWEB)

Urata, T. [Tokyo (Japan); Omura, T. [Tokyo (Japan)

1995-07-04

In the conventional fuel cell heat utilization system, the waste heat is recovered to be utilized by either the waste heat recovery heat exchanger or the waste heat recovery steam. In the employment of the waste heat recovery heat exchanger system, however, the utility value is decreased when the temperature of the waste heat is lowered. Contrarily, in the employment of the waste heat recovery steam system, the supplementary water requirement is increased corresponding to the amount of waste heat recovery steam, resulting in the cost increase for water treatment. This invention solves the problem. In the invented fuel cell heat utilization system, a pressurized water from the steam separator is introduced into the second circuit to utilize directly the heat in the heat utilization system without employing the heat exchanger. If a blowdown valve is installed between the second circuit heat utilization system and the steam separator, the heat loss due to the blowdown can be reduced, since the low temperature water is blown down after being utilized in the heat utilization system. 4 figs.

Romanticism of Khudekov Park. To semantics of Sochi "Arboretum"

Directory of Open Access Journals (Sweden)

Soltani Galina

2015-12-01

Full Text Available Park, as the autobiography of his Creator, reflects the events of the life of S. N. Khudekov, moral and aesthetic values, impressions, affections, transmitted through literary and mythological images. The semantics of small architectural forms multivalued and includes themes of Love, Faith, Hope, Patience, Justice, Families, Ballet, Literature, Military glory, in the Morning, creating a unified ensemble. The symbolism inherent in the Romantic style, is transmitted sculptures made by the famous French firm of Antonie Durеnne. The Khudekov’s Park is great not only the organic combination of different styles of landscape, but also its ideological content, expertly crafted fine connoisseur of art Sergey Nikolaevich Khudekov.

Cleaning of road accessories with powdered sodium bicarbonate; Jutansan natrium ryu wo mochiita doro fuzokubutsu no senjo

Energy Technology Data Exchange (ETDEWEB)

Yamashita, H.; Amagori, Y.; Mori, E. [Japan Highway Public Corporation, Tokyo (Japan)

1998-06-25

A method for cleaning highway accessories with powdered sodium bicarbonate is developed, to replace mechanical cleaning by a multi-purpose vehicle or manual cleaning, and thereby to reduce road maintenance cost. It pneumatically blows sodium bicarbonate particles by a blaster connected to a water tank and compressor onto a variety of stains to remove them. The cleaning system is applicable to a variety of purposes, allowing dry and wet cleaning modes to be easily switched from each other. Sodium bicarbonate, being naturally occurring, is harmless, and its type can be freely chosen. This method was applied in FY1996 mainly to cleaning interior plates in highways, to collect the basic data. Its cleaning effectiveness has been confirmed by applying it to the internal plates, which are difficult to clean by a multi-purpose vehicle, and illuminators in tunnels, whose cleaning areas are narrow. It recovers reflectivity of plates to 85% of the initial level at the highest, and shows 3 times higher efficiency for heavily stained plates. The test was continued in FY1997. It shows an approximately 5 times higher cleaning capacity than the conventional method, greatly reducing cleaning time, especially for illuminators in tunnels. 7 figs., 5 tabs.

Innovations in redevelopment projects

Directory of Open Access Journals (Sweden)

Radushinsky Dmitry

2018-01-01

Full Text Available Some examples of redevelopment of industrial territories (lofting abroad and in Russia for the purpose of qualitative research and classification, identification of the main features of process innovations are considered in the article. The following main parameters were established, according to which the differences in the implementation of various types of redevelopment projects were determined: the composition of the consumers of the services (the result of the implemented project, the opportunities and the intensity of the flow of high-class specialists to the jobs created during the redevelopment of municipal and regional facilities, area, value (budget and terms of project implementation. A perspective project of RTOs (museum-entertainment complex for machine-building in Kolpino, as well as opportunities to expand the ecosystem of innovation Sochi Innovation Valley, was considered.

Automotive technology. ; Chassis. Jidosha gijutsu. ; Chassister dot sharyo seigyo sochi

Energy Technology Data Exchange (ETDEWEB)

Ota, K.; Mor, H.; Ishizeki, S. (Fuji Heavy Industries Ltd., Tokyo (Japan))

1990-07-01

According to the trend of car suspensions announced in 1989, not only sports cars but also sedans have extensively applied a multi-link type and a double-wishbone type which are to improve operation stability and comfortableness by reexamining all their fundamental structures. Active suspensions with electronic control have been put to practical use and adopted for the first time to mass-produced cars such as INFINITI'' and CELICA''. Concerning steerings, most types of light cars are now equipped with power steerings. Moreover, application of air bags has increased, and safety has been improved by commercialization of the first mechanical air bags in addition to the conventional electrical ones. As for brakes, more anti-lock brakes have been used for 4WD cars and low-displacement cars. Motorcars with a traction control system have consequently increased. Thus both the anti-lock brakes and the traction control system are contributing to the improvement in safety. 17 figs., 2 tabs.

Active condensation of the atmospheric moisture as a self-irrigation mechanism for the ground-covering plants

Directory of Open Access Journals (Sweden)

Karpun Yuriy Nikolaevich

2015-12-01

Full Text Available Studies conducted at the Subtropical Botanical Garden of Kuban (Utch-Dere, Sochi pretty much allow to explain the abnormally high drought resistance of Liriope graminifolia Lour. and Ophiopogon japonicus Ker.-Gawl., plants that naturally grow mostly in sufficient humidity. Quite low temperatures of the leaves’ surface allow to effectively condense the atmospheric moisture and to direct it along the leaf blade to the ground. The accumulation of condensation water leads to self-irrigation, a mechanism that ensures survival of plants in case of insufficient natural precipitation in the form of rain or fog. Combined with xeromorphic leaves with a thick cuticle and thick branch roots with fusiform bulb-shaped swellings, allowing to store water, makes the named plants extremely resistant to stress factors such as prolonged summer droughts accompanied by high daytime temperatures.

1st International Scientific Conference on Intelligent Information Technologies for Industry

CERN Document Server

Kovalev, Sergey; Tarassov, Valery; Snášel, Václav

2016-01-01

This volume of Advances in Intelligent Systems and Computing contains papers presented in the main track of IITI 2016, the First International Conference on Intelligent Information Technologies for Industry held in May 16-21 in Sochi, Russia. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI) and Russian Association for Fuzzy Systems and Soft Computing (RAFSSC). The volume is devoted to practical models and industrial applications related to intelligent information systems. The conference has been a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the-state-of-the-art in intelligent systems and soft computing are included in the proceedings as well.

Changes in physical performance parameters during and after moderate altitude training in elite cross country skiers

DEFF Research Database (Denmark)

Jensen, Kurt; Höög, Martina; Willis, Sarah

2013-01-01

INTRODUCTION: The Olympic cross country skiing competitions in 2014 will be held in Sochi, Russia at an altitude of approximately 1500m. Although moderate, this altitude is known to reduce performance in highly trained endurance athletes. It is also known that individuals react differently during...... altitude exposure. The purpose of this study was to evaluate performance changes during and after three weeks of training in moderate altitude in elite skiers. METHOD: Four male and three female skiers were tested on a roller skiing treadmill using the classic technique at sea level (NORM1), after 3 and 20...... and the WVO2max decreased 8.9% and 9.1%, respectively (P0.05). In contrast, the average power output (322±87W) during the “all out” test increased 3.4±2.7% 10 days after the altitude training (P

Fundamental study on PV system for floating water power device `Mighty Whale`; Okiai futaishiki haryoku sochi `Mighty Whale` eno taiyoko hatsuden sochi tosai no kihon kento

Energy Technology Data Exchange (ETDEWEB)

Washio, Y [Japan Marine Science and Technology Center, Kanagawa (Japan)

1996-10-27

Studied in this paper is the use of a photovoltaic power generation system in combination with a wave energy conversion system to cover the latter`s weak point that it is available but intermittently. An offshore floating wave power device Mighty Whale (MW) is described, which will have a wave energy absorbing air chamber in the front and an anti-rocking float that looks like a whale in the rear. The movement, up and down and back and forth, of the water surface in the air chamber due to incident waves turns the power generator turbine. Out of the space available on the MW, a 200m{sup 2} area has been specified as the place suitable for the installation of solar cells capable of a maximum output of 20kW, for which specification the elevation of the sun has been taken into account. Batteries will routinely be supplied with power in parallel from the wave activated and photovoltaic devices, the supply will be limited when the batteries are fully charged, and an auxiliary power generator will be run in case of shortage. Power that can be provided by a 20kW solar array was calculated using actual data of sunshine on the slope for each array orientation, and required battery capacity was calculated for each solar array orientation. Important items for consideration for the insurance of reliability on the ocean include measures against salt damage, detailed designing of wiring, and coordinated operation of photovoltaic and wave activated power generation systems. 3 refs., 6 figs., 5 tabs.

Electrolyzed-water generator 'SaniBoy'; Eisei jokinsuik kyokyu sochi 'SaniBoy'

Energy Technology Data Exchange (ETDEWEB)

Inoue, M; Kakiuchi, H; Muto, K [Fuji Electric Co. Ltd., Tokyo (Japan)

2000-03-10

In the food industry, injuries due to food poisoning have been increasing. Especially the mass outbreak of food poisoning by Escherichia coli such as O-157 in 1996 gave warning on the importance of food sanitation management. Public efforts such as the Hazard Analysis and Critical Control Point (HACCP) system have been made to prevent food poisoning. Recently, disinfection made by electrolyzing water with some salt added has attracted attention. Fuji Electric has developed the generator 'SaniBoy' that produces weak alkaline electrolyzed water without wasting water. The environment-friendly 'SaniBoy' will contribute to sanitation in various fields. (author)

SDI HDTV video transmission unit; SDI high vision eizo denso sochi

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The number is increasing of broadcasting stations who use HDTV (high-definition television) signals for program formulation for the improvement of video quality for general broadcasting programs. The above-named unit, which transmits HDTV signals which are broadcasting materials over a long distance with their high quality well preserved, is capable of the optical transmission of SDI (serial digital interface) signals meeting the standards of BTA (Broadcasting Technologies Association) on 1 video channel and 2 digital audio channels. It can also work on the light wavelength multiplex system. It was developed under the guidance of TTNet (Tokyo Telecommunication Network Co., Inc.), and gained public favor when it successfully transmitted programs over a distance of approximately 400km from Nagano to Tokyo during the Nagano Olympic Games. It now transmits various high-quality video signals for instance in the relay of baseball games, thereby contributing to the improvement of video quality for broadcasting. (translated by NEDO)

«Monetary Program» of Ancient Greek Olympic Games (History and British Historiography of the XIX – Early ХХ Centuries

Directory of Open Access Journals (Sweden)

Olga V. Gzhibovskaya

2013-01-01

Full Text Available Commemorative coins are one of the attributes of the modern Olympic movement, relating to the category of «Games Product». Monetary program “Sochi 2014”, realized since 2011 is one of the most extensive and design diversified. The tradition to stamp out coins in the host city of the Olympic Games was established in Ancient Greece. They served not only as a means of exchange or as a store of value, ancient Greeks managed to make them works of art. Ancient authors’ data, concerning coinage site, time and type don’t give an accurate account of the coins we can reasonably call the “Olympic” ones. This problem has been solved by numismatologists from late XVIII century through the present. Their views of ancient “monetary program” differ. This article is focused on the special character of these discrepancies both in historical records and historiography

High-resolution S-wave reflection survey in a linear depression; Senjo kubochi ni okeru kobunkaino S ha hanshaho tansa

Energy Technology Data Exchange (ETDEWEB)

Inazaki, T [Geological Survey of Japan, Tsukuba (Japan); Sasaki, Y [Kyushu Regional Construction Bureau, Fukuoka (Japan)

1997-10-22

An attempt was made to apply a method combining the high-resolution S-wave reflection survey with boring to a fault survey at the Kuju town, Oita Prefecture. The investigation area has a linear depression area as small as about 600 m from east to west and about 100 m from north to south surround by mountain slopes. The boundary section with mountain peaks at the north ridge of the depression area is linear, and existence of a southward falling normal fault has been indicated. The seismic investigation has employed an artificial plank hammering method, and the derived data were processed by using the processing software, Vista for Windows. The Bin interval was 25 cm, the S-wave velocity ranged from 100 to 150 m/s, and the spatial resolution was estimated at several ten centimeters or less. The resolution is thought sufficient for assessing the fault location and displacement. The acquired depth cross sections presented distinct structural discontinuity, from which the fault locations were estimated. However, for displacements in the base bed and upper beds, the reflected waves fell into disorder at the faults, having made a detailed assessment difficult. 4 figs., 1 tab.

A bobsleigh simulator software

Energy Technology Data Exchange (ETDEWEB)

Rempfler, Georg S., E-mail: georg.rempfler@alumni.ethz.ch [ETH Zurich, CLA G23.3, IMES—Center of Mechanics (Switzerland); Glocker, Christoph, E-mail: glocker@imes.mavt.ethz.ch [ETH Zurich, CLA J23.1, IMES—Center of Mechanics (Switzerland)

2016-03-15

This paper presents a model of the artificial ice track in Whistler, Canada that is based on its construction data, and a model of a two-men bobsleigh consisting of nine rigid bodies, having 13 degrees of freedom and incorporating 17 hard frictional contacts. These models are implemented within a simulator that is capable of performing accurate real time simulations of piloted runs on commonly available PC hardware. The simulation is verified against the results of the official two-men race that took place during the Olympic Winter Games in 2010. The simulator has been used by several professional Swiss pilots during their preparation for the 2014 Olympic Winter Games in Sochi, Russia. The simulator is exploited to analyse and judge the range of possible driving lines regarding speed and runtime improvements. It could also serve to consult track designers about safety issues and sleigh constructors about the expected dynamics on a track.

A bobsleigh simulator software

International Nuclear Information System (INIS)

Rempfler, Georg S.; Glocker, Christoph

2016-01-01

This paper presents a model of the artificial ice track in Whistler, Canada that is based on its construction data, and a model of a two-men bobsleigh consisting of nine rigid bodies, having 13 degrees of freedom and incorporating 17 hard frictional contacts. These models are implemented within a simulator that is capable of performing accurate real time simulations of piloted runs on commonly available PC hardware. The simulation is verified against the results of the official two-men race that took place during the Olympic Winter Games in 2010. The simulator has been used by several professional Swiss pilots during their preparation for the 2014 Olympic Winter Games in Sochi, Russia. The simulator is exploited to analyse and judge the range of possible driving lines regarding speed and runtime improvements. It could also serve to consult track designers about safety issues and sleigh constructors about the expected dynamics on a track.

Recent development of levitation melting equipment; Fuyo yokai sochi (CCLM) no shinten

Energy Technology Data Exchange (ETDEWEB)

Tadano, H.; Kainuma, K. [Fuji Electric Furnace Co. Ltd., Mie (Japan)

1998-05-10

Fuji Electric Co., Ltd., is advancing its research and development efforts for cold crucible levitation melting (CCLM) equipment in which metal is caused to be levitated in the air and is melted. Such a unit consists of a water-cooled copper crucible, a water-cooled coil installed to surround the crucible, and a high-frequency power source. Eddy currents are induced in the crucible and metal upon application of a high-frequency current to the coil, and electromagnetic repulsion is generated between the eddy currents. When the force of repulsion is greater than the force of gravity acting on the metal, the metal leaves the crucible to be levitated in the air. At the same time, the metal is heated by the Joule heat produced by the eddy currents, and is melted. So far, for the stabilized levitation melting of a kilogram-level amount of metal, a double power source excitation system has been adopted and the crucible bottom configuration has been optimized. Also, non-contact tapping of molten metal from the bottom and increase of the molten metal amount to the 50 kilogram level have been achieved, these for the industrialization of the technology. Already available on the market are equipment for large-capacity CCLM, continuous casting CCLM, and the high-vacuum CCLM. 5 refs., 13 figs., 3 tabs.

Development of a domestic platn cultivation unit. Kateiyo saibai sochi no gaiyo

Energy Technology Data Exchange (ETDEWEB)

Sugimoto, K. (The Tohoku Electric Power Co. Inc., Sendai (Japan))

1993-06-15

This paper describes development and operation evaluation on a domestic plant cultivating unit that can cultivate plants throughout a year by installing a prototype cultivating device effectively utilizing electric power, and controlling the cultivation environments. The prototype plant cultivating device uses trially an air cooling heat pump for general household use with high general-purpose applicability installed in a glass greenhouse with an area of about 10 m[sup 2], similar to those used by orchid lover club members. The device also uses commercially available humidifying and ventilating devices. No household horticultural facilities in cold district have ever used this kind of heat pump. Generally, cultivating environments in glass greenhouses are affected more easily by outside climate change as the greenhouse volume becomes smaller. For this reason, with this small-scale prototype cultivating device, orchids are cultivated to identify cultivating environments, and study technological development on controls over proper year-round cultivation and effective cultivation environments, as well as development and operation evaluation on household plant cultivation devices. 2 figs., 1 tab.

Color sorter for waste bottles; Hai garasu bin no iro senbetsu sochi

Energy Technology Data Exchange (ETDEWEB)

Uchida, M. [Sumitomo Metal Industries Ltd., Osaka (Japan)

1994-08-12

The recycling business about glass bottles having extended widely, ratio of recycled materials has come up to 55% out of all raw materials for bottle manufacturing. For the purpose of effective reuse, sorting by color into colorless, brown, green, etc. is indispensable. But, at present, this sorting work relies solely upon manpower. In response to the demand for automation of the above work, automatic color sorting system has been developed. In the first place, a pre-sorter can divide bottles into large ones (larger than 10cm in diameter), small ones and cullets. Bottles from the pre-sorter are arranged horizontally on a conveyer, and then light is shined in the direction from each bottle neck. By a color camera, each light permeated through a bottle bottom is caught. Next, by means of an image processing unit, bottles are gathered by color. Cullets are put on several conveyers and are separated by means of color sensors and air nozzles. Disposing capacity of one unit is 5,000 bottles/hr by each size, and one ton of cullets/hr. 4 figs., 2 tabs.

For fundamental rules popularization of the 1 day concrete; 1 day konkurito no honkaku fukyu ni mukete

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-10

Cement manufacturer of 4 companies (Sumitomo Osaka Cement, Pacific Ocean cement, DENKI KAGAKU KOGYO, TOKUYAMA) with the subscription in the joint development of the super fast-strong concrete and technology development with the aim of future real popularization started by foundation civil engineering research center (chief director: Mr. Masateru Tokunaga). The Ministry of Construction Public Works Res. Inst. chose the 1991 {approx} 1993 with part of all professionals fast-strong super concrete (1 day concrete), and it was established by cement manufacturer 4 companies and joint development in those days, and it is a result of demonstrating the strength in which the plain concrete appears in ages 28th first. Urgent roads repair work and spraying, manufacturing and mounting of concrete product which can demonstrate this merit, etc. become a main target for the application. It is said that there is in the stage that at the present, general high-early-strength cement produces the production technique by technical progress, and that it can easily produce even in supplied cement plant and ready mixed concrete producer. When it was limited to the simpler admixture ingredient addition system. (1) The development. Performance testing. (2) The design and construction manual preparation. (3) 'fast-strong super concrete technology research council' which added examination, cement manufacturer and man of learning and experience and user of the popularization measures cooperatively does it. By also positively offering the technology to the user, while the manufacturable businessman is increased by this, the speed of fundamental rules popularization is accelerated. (translated by NEDO)

Exogenic geomorphic processes dynamics at the Black Sea coast, Russia

Science.gov (United States)

Kuznetsova, Yulia; Tsvetkova, Daria

2017-04-01

Nowadays there is an obvious grow of anthropogenic load going on in many areas worldwide. Under such conditions, intensive activation of a number of exogenic geomorphic processes may be observed. Moreover, if natural environment is aggressive itself their dynamics and rates may reach enormous values. Our work is conducted at the Black Sea coast, known for its mountainous topography, wet subtropical climate and intensive anthropogenic development (especially during the last decade due to the recent Olympic games). We chose two key basins near Sochi, Russia to study a number of presented exogenic processes, including rill, gully and channel erosion, weathering, suffusion and piping, soil creep. A set of field study methods is used to monitor the processes dynamics since 2005 (and late 1970s for soil creep). In addition, soil erosion rates and landslide susceptibility were modelled to get information of the watersheds dynamics. This is ongoing work, but the results of the passed period of observations will be resented. Special attention is paid to the processes connectivity and their input into sediment redistribution over the river basins.

A 7500 km journey on a solar-powered bicycle: show solidarity with their efforts

CERN Multimedia

Staff Association

2013-01-01

Our two colleagues, Celine and John, in a little less than four weeks have already travelled almost 2500 km of their 7,500 km-long journey on solar-electric bike, where they plan to cycle from Geneva to Astana (Kazakhstan) via Sochi (in Russia, a mandatory stop). With their efforts they want to promote solar and eco-mobility, particularly travel by "solar powered" bike. To add a touch of solidarity to their sportive and human experience, Celine and John asked us to organize an action in the framework of the Long-Term Collections. It is with pleasure that the Staff Association has accepted their proposal. Therefore, we offer you the opportunity to subscribe to a humanitarian initiative where you agree to pay a sum of 10 CHF for countries crossed by Celine and John, with a minimum commitment of 30 CHF and a maximum of 100 CHF. Indeed, their scheduled trip includes crossing ten countries in Europe and Asia. Position of Céline and Jean on Friday 12th of July Today they are in...

Some contradictions in contemporary assessment acrobatic elements used in the compositions of category "B-Class" in acrobatic rock'n'roll

Directory of Open Access Journals (Sweden)

Larisa Lutsenko

2015-04-01

Full Text Available Purpose: determine the impact of an innovative approach to improve the special physical and technical training of qualified athletes in acrobatic rock'n'roll. Material and Methods: theoretical analysis and synthesis of the literature, the competition rules, policy papers and documents catalog acrobatic elements "in class". The basic material for analysis was the changes to the 2014 WRRC, judging changes in their sport. Results: studied the catalog acrobatic elements "B-Class" (version 2 WRRC from 14.09.2014, reviewed and analyzed the results of stronger pairs category "B-class" in acrobatic rock'n'roll (World Cup, Russia, Sochi, Russia. The analysis of the requirements of execution of acrobatic elements. Conclusions: these findings demonstrate the need for an innovative approach to improve the special physical and technical training athletes acrobatic rock and roll category "B-Сlass". The difficulty level of acrobatic elements in acrobatic rock 'n' roll should be differential with respect to each of the age groups in their strict sequence the category "juniors" – "in-class" and "M-class".

Education effect of solar car for technical high school student; Kogyo kokosei ni taisuru solar car no kyoiku koka

Energy Technology Data Exchange (ETDEWEB)

Inoue, T.

1998-09-30

The solar car race which technical high school students can join in was determined to be held at Ogata village, Akita prefecture. To join in the solar bicycle race, the author working in Ofuna technical high school called on 3 schools of Yokosuka, Fujisawa and Kanagawa technical high schools which joined in World Solar-Car Rally in Akita (WSR) in 1997, before fabrication of a racing bicycle. This paper describes the survey results at the above technical high schools, and the spirit as the teacher of Ofuna technical high school on joining in the race and fabrication of the solar bicycle, and the past, current and future situations. Club activities of high school students incline too toward sports such as soccer, baseball, volleyball and rugby, and are apt to keep honest cultural events and technical events at a distance. The author says that the challenge spirit to the solar car race using environment-friendly solar energy by both dedicated teachers and students of technical high schools summoned up the author`s courage. 15 figs.

Treatment of waste water miscible cutting fluids in automobile manufacturing; Jidosha kogyo ni okeru suiyosei sessakuyuzai no haieki shori

Energy Technology Data Exchange (ETDEWEB)

Ono, H. [Yushiro Chemical Industry Co. Ltd., Tokyo (Japan)

1995-09-01

Water-soluble cutting fluids are able to be used for several months to several years if the proper periodical management is carried out. However, the used solution should be treated as waste water when the function-recovery thereof becomes remarkable difficult. On this occasion, the treated solution (drainage) ought to meet the environmental standards prescribed for the purpose of protecting globe environment. Many cases in Japan are that the strict rules are set by each urban and rural prefectures addition to the government ordinance. For carrying out the treatment of waste water efficiently, it is necessary to construct the treating system by mastering the characteristics of waste water and selecting the most suitable one from numerous treating methods. In this paper, after the description on the water-polluting substances and drainage standards, the general treating method of waste water miscible cutting fluids is described. Finally, the concrete cases with respect to the treatment of waste water treatment in automobile manufacturing factories are introduced. 5 refs., 5 figs., 5 tabs.

Research on linear driving of wave maker; Zoha sochi no linear drive ka kenkyu

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, I; Taniguchi, S; Nohara, T [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

1997-10-01

The water tank test of marine structures or submarine structures uses a wave maker to generate waves. A typical flap wave maker uses the wave making flap penetrating a water surface whose bottom is fixed on a tank bottom through a hinge, and the top is connected with a rod driven by rotating servomotor for reciprocating motion of the flap. However, this driving gear using a rotating servomotor and a bowl- screw has some defects such as noise caused by bowl rotation, backlash due to wear and limited driving speed. A linear motor with less friction mechanisms was thus applied to the driving gear. The performance test result of the prototype driving gear using a linear motor showed the possibility of the linear driven wave maker. The linear driven wave maker could also achieve low noise and simple mechanism. The sufficient durability and applicability of the linear driven wave maker mechanism were confirmed through strength calculation necessary for improving the prototype wave maker. 1 ref., 5 figs., 2 tabs.

Fuji Electric`s line of uninterruptible power systems; Muteiden dengen sochi no seihin keiretsu

Energy Technology Data Exchange (ETDEWEB)

Kobata, S.; Ishikawa, Y.; Yokoyama, T. [Fuji Electric Co. Ltd., Tokyo (Japan)

1997-08-10

Uninterruptible power systems (UPSs) are widely used in financial institutions, utility services, totalizator systems, traffic control systems, plants, new media, medical systems, and information processing services. These are highly reliable power supply systems to protect computer-aided information and communication systems from power failure or defects. Described herein is the company`s line of UPSs developed by integrating power electronics, and digital and high-frequency switching techniques. The major components of a UPS are rectifier, inverter and battery. Power is supplied by commercial or inverter system. The former is widely used by plants because of its low loss and high efficiency, although distorted output waves or instantaneous power failure may occur when the power source is switched in the case of power failure. The latter is suited for computer systems, because of its ability of stably supplying power, without being affected by the disturbances which may occur in the commercial system. 7 figs., 2 tabs.

Oil soot measurement system of diesel engine; Diesel engine no oil sutsu sokutei sochi

Energy Technology Data Exchange (ETDEWEB)

Mizuno, Y; Moritsugu, M; Kato, N [Nippon Soken, Inc., Tokyo (Japan); Osaki, R [Denso Corp., Aichi (Japan)

1997-10-01

For use evaluate diesel engine in laboratory, we have developed a apparatus which can measure soot density in engine oil instantly and accurately. We have achieved accuracy of 0.03 wt% by employing the following; (1) utilize a ligh-reflecting oil soot sensor, (2) regurate the temperature and flow of the in-coming oil to be constant. 4 refs., 12 figs., 2 tabs.

Wastes disposal on board a ship. Disposal of sewage and waste water; Senjo no haikibutsu shori. Osui oyobi haisui no shori ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Nakamura, K. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

1996-07-25

This paper describes technologies and devices suitable for disposing of sewage and waste water produced in a ship. Methods for disposing of sewage in a ship include such physico-chemical disposition methods as disinfection and sterilization, and such biological disposition methods as activated sludge sewage disposition and catalytic oxidation (biological membrane treatment). Sewage treatment devices include a storage tank type sewage treatment device often used in inner sea liners such as ferry boats, and a biological treatment device (aeration device) used as a mainstream in merchant ships, large passenger liners, and governmental ships. With the storage tank type sewage treatment device, sewage is stored in a storage tank provisionally while a ship is cruising in a discharge prohibited sea area, and discharged in a sea area allowing the discharge or when the ship enters a port. The method is simple, but limited in storage volume. An activated sludge sewage treatment device consists of a tank divided into an aeration chamber, a sedimentation chamber and a disinfection chamber, an air compressor, a chlorine dissolving apparatus, and a screen. Sewage is digested and decomposed by activated sludge, and the top clear water is disinfected by chlorine, and then discharged. 1 tab.

Education for hydraulics and pneumatics in Nara National College of Technology; Nara Kogyo Koto Senmon Gakko ni okeru yukuatsu kyoiku

Energy Technology Data Exchange (ETDEWEB)

Hayakawa, Y. [Nara Technical Coll., Nara (Japan)

2000-03-15

In the electronic control engineering course, basic knowledge is taught for mechanics, electronics/electricity, control, robotics, information processing, etc., with the purpose of bringing up practical mechatronics engineers, and then, training is conducted so that the students are able to deal with these subjects comprehensively. In the subject of hydraulics and pneumatics for the special course, a lecture on hydraulic and pneumatic control is given in the second year, where structures of hydraulic and pneumatic actuators are explained as well as the principle of operation and the control method. As the related experiment, measurement of liquid viscosity coefficient and flow measurement by a Venturi tube are carried out in the fourth year of the regular course. In addition, carried out in the fifth year are the measurement of stress by trailing velocity distribution of an object and the measurement of pressure distribution around a column. As a subject for graduation theses, a mobile carrier for welfare nursing is being developed using a pneumatic actuator. Development of a suitable actuator is also being developed simultaneously. In the education of electronic control engineering, it is essential to give the students understanding of hydraulic and pneumatic actuator control centering on the role of mechatronics. (NEDO)

Contamination profiles of short-chain polychlorinated n-alkanes in foodstuff samples from Japan

Energy Technology Data Exchange (ETDEWEB)

Matsukami, Hidenori; Kurunthachalam, S; Ohi, Etsumasa; Takasuga, Takumi [Shimadzu Techno Research, Inc., Kyoto (Japan); Iino, Fukuya; Nakanishi, Junko [National Inst. of Advanced Industrial Science and Technology, Tsukuba (Japan)

2004-09-15

Polychlorinated n-alkanes (PCAs) are group of chemicals manufactured by chlorination of liquid n-paraffin or paraffin wax that contain 30 to 70% chlorine by weight. Large amounts of PCAs are widely used as plasticizers for vinyl chloride, lubricants, paints, and flame retardants and number of other industrial applications. Annual global production of PCAs is approximately 300 kilo tones, with a majority having medium-carbon-chain (C14-C19) length. According to the investigation made by Kagaku Kogyo Nippon-Sha, the annual consumption of PCAs in Japan was about 83,000 tons in between 1986-2001. Short-carbon-chain (C10-C13) has been placed on the Priority Substance List under Canadian Environmental Protection Act and on the Environmental Protection Agency Toxic Release Inventory in the USA due to its potential to act as tumor promoters in mammals. Data on environment levels of PCAs is meager, nevertheless, PCAs have been measured at relatively high concentrations in biota from Sweden, biota, sediment from Canada and marine biota and human milk from the Canadian Arctic. In our earlier study, we reported concentrations of short-chain PCAs from sewage treatment plant (STP) collected from Tama River, Tokyo and river water and sediment from Tokyo and Osaka. STP influent water contained greater shortchain PCAs concentrations than STP effluent. In addition, some river water and sediment samples contained detectable concentrations of short-chain PCAs, which was similar to other industrial countries. However, there is no study conducted to explore the contamination profiles of short-chain PCAs in human foodstuff samples. In the present study, we analyzed eleven foodstuff samples that were purchased from various supermarkets in order to know the short-chain PCAs concentrations in the foodstuff and possible human total daily intake (TDI) amounts.

Development and demonstration of optical polarization controller; Hikari henpa seigyo sochi no kaihatsu to jissho

Energy Technology Data Exchange (ETDEWEB)

Kurono, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-04-01

If fiber transmission light can be controlled in a stabilized polarization state, realization of coherent optical communication is anticipated. In the case of adopting it to OPGW, however, it is necessary to compensate high speed polarization variation caused by lightning strike. But this was difficult in the conventional method. Accordingly, a high speed polarization control method was proposed which uses an electric effect of lithium niobate (LN) crystals. In the study, a polarization control unit was manufactured based on the method proposed and the performance was demonstrated. As a result of measuring output light with input light changed in every state of polarization, the object horizontal polarization component obtained a stabilized light intensity at {+-}0.1dB, and a light intensity of the component slipped out of the horizontal polarization was suppressed under -20dB. To cope with the polarization variation by lightning strike, it is necessary to make the control delay 10{mu}sec or below, and improvement in processing unit, etc. may make it possible since LN crystals respond below 1{mu}sec. High speed control of the infinitely continuing arbitrary polarization variation became possible. 14 refs., 19 figs.

Electrolyzed-water generator 'SaniBoy'; Eisei jokinsuik kyokyu sochi 'SaniBoy'

Energy Technology Data Exchange (ETDEWEB)

Inoue, M.; Kakiuchi, H.; Muto, K. [Fuji Electric Co. Ltd., Tokyo (Japan)

2000-03-10

In the food industry, injuries due to food poisoning have been increasing. Especially the mass outbreak of food poisoning by Escherichia coli such as O-157 in 1996 gave warning on the importance of food sanitation management. Public efforts such as the Hazard Analysis and Critical Control Point (HACCP) system have been made to prevent food poisoning. Recently, disinfection made by electrolyzing water with some salt added has attracted attention. Fuji Electric has developed the generator 'SaniBoy' that produces weak alkaline electrolyzed water without wasting water. The environment-friendly 'SaniBoy' will contribute to sanitation in various fields. (author)

Supplymentary type semiconductor device and manufacturing method. Soho gata handotai sochi oyobi sono seizo hoho

Energy Technology Data Exchange (ETDEWEB)

Uno, Masaaki

1990-01-08

As a supplementary type semiconductor device has a complicated structure, it is extremely difficult to construct it in a three dimensional structure. This invention aims to reduce its occupying area by forming p-channel and n-channel transistors in a solid structure; moreover in an easy method of production. In other words, an opening is made in the element-forming region of a semiconductor substrate, forming a gate-insulation film on each of the p-type and n-type semiconductors which are exposed on the two facing surfaces; on it formed a gate electrode; p-type semiconductor surface is used as a channel domain; a drain region of n-channel transistor on one surface and a source region on another surface; the n-type semiconductor surface corresponding to the gate electrode is used as a channel region; a source region of the n-channel transistor is formed on the same surface and the drain region on the substrate surface. Occupied area is thus made less and the production gets easier. 20 figs.

Molecular Diagnostics of Hemorrhagic Fever with Renal Syndrome during a Dobrava Virus Infection Outbreak in the European Part of Russia ▿

Science.gov (United States)

Dzagurova, Tamara K.; Klempa, Boris; Tkachenko, Evgeniy A.; Slyusareva, Galina P.; Morozov, Vyacheslav G.; Auste, Brita; Kruger, Detlev H.

2009-01-01

A large outbreak of hemorrhagic fever with renal syndrome (HFRS) occurred in the winter of 2006-2007 in a region southeast of Moscow in Central European Russia. Of the 422 patients with HFRS investigated in this study, 58 patients were found to be infected by Puumala virus, whereas as many as 364 were infected by Dobrava-Belgrade virus (DOBV). Early serum samples from 10 DOBV-infected patients were used for nucleic acid amplification, which was successful for 5 patients. Molecular analyses demonstrated that the causative hantavirus belongs to the DOBV-Aa genetic lineage, which is carried by the striped field mouse (Apodemus agrarius) as the natural reservoir host. Neutralization assays with convalescent-phase sera from these patients confirmed infection by DOBV-Aa; related viruses, such as the Dobrava-Slovenia virus (DOBV-Af) and the Dobrava-Sochi virus (DOBV-Ap), were neutralized at lower efficiencies. The clinical courses of the 205 patients enrolled in the study were found to be mostly mild to moderate; however, an unexpectedly high fraction (27%) of patients exhibited severe illness. One patient died from kidney failure and showed symptoms of generalized subcutaneous hemorrhage. The results provide molecular, serodiagnostic, and clinical evidence that DOBV-Aa is a common pathogen in East Europe that causes large outbreaks of HFRS. PMID:19828747

The teaching staff of the public education system in the period of the First Russian Revolution (1905–1907 years (on the materials of the Black Sea province

Directory of Open Access Journals (Sweden)

Konstantin V. Taran

2016-03-01

Full Text Available The article on the basis of archival documents examines the role of teaching staff of educational institutions of the Black Sea province during the First Russian revolution. The attention is paid to the participation of students of senior classes in the revolutionary movement. Among the materials are the archival documents of central and regional archives, namely the state archive of the Russian Federation, Russian state military historical archive, the state archive of the Krasnodar Krai, the center for documentation of contemporary history of Krasnodar Krai and the archive department of historical museum of city-resort Sochi. The authors come to the conclusion that on the territory of the Black Sea province, the activities of significant part of the teaching staff were aimed at destabilization of the political situation, contributing to the overthrow of the existing government. Rather than to protect the high schools students from the influence of political propaganda and to return students to the classrooms, some teachers have contributed to reverse the process, encouraging the study of the political programs of the parties and the desire to participate in the revolutionary movement. As a result, the schoolchildren, minors with unsettled teenage psychology participated in various revolutionary actions, which could lead to the tragic consequences.

Development of sound absorption measuring system with acoustic chamber; Kogata kyuon koka sokutei sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Takahira, M.; Noba, M. [Toyota Motor Corp., Aichi (Japan); Matsuoka, H. [Nippon Soken, Inc., Tokyo (Japan)

1998-05-01

In order to measure sound absorption performance necessary to develop sound absorption materials, development was made on a device consisting of a small sound box capable of measurement inexpensively and easily, as a measure against the reverberation chamber method. In order to obtain stabilized diffusion sound internally, the sound box has a shape of asymmetric seven-side body in which sides do not face squarely with each other. The box was so sized that a large number of resonant vibration postures can be constituted at the targeted frequency simultaneously in the box. The box has a commercially available cone speaker with good acoustic output characteristics in frequency range of higher than 500 Hz installed on an inner side of the box. The sound source uses a method to derive sound absorption rate from difference of sound pressure levels. In order to eliminate need of averaging treatment by using a multi-point measurement inside the box, a discussion was given to provide an opening on part of the box to place the sound receiving point outside the opening. A square test piece is placed on the floor 0.5 meter or more away from the speaker in the box. As a result of the experiment, it was verified that the sound absorption rate obtained by this device corresponds well with that by the reverberation chamber method. The size of the test piece was also found adequate. 2 refs., 11 figs., 1 tab.

Molten carbonate fuel cell power generation system. Yoyu tansan prime en gata nenryo denchi hatsuden sochi

Energy Technology Data Exchange (ETDEWEB)

Uematsu, K; Hatori, S [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

1991-11-01

In an indirect internal reforming type molten carbonate fuel cell, the reforming temperature is limited less than the operating temperature of the fuel cell, as the heat source for reforming is depended on the reaction heat at about 650 {degree} C of the fuel cell. To improve the reforming rate at the low temperature range, it is considered to increase S/C (ratio of steam to carbon), but this scheme will cause such problems as to increase the voltage drop of the anode, to drop the heat recovery ratio on the cogenerator, to increase the capacity of the heat exchanger, etc. In this invention, in the power generating plant of a molten carbonate fuel cell the inert gas is added to the reforming raw gas, and in addition to the above the gas is mixed with steam and led into the reforming chamber of the plant. When the inert gas which is not directly concerned in the reforming reaction is added to, total mol number increases and the reforming reaction is acceralated. Consequently, the reforming rate can be raised, though the reforming temperature is low. 2 figs.

Drift data of the sea-gravity meter (SL-2) installed on the R/V Hakurei-maru; `Hakureimaru` senjo jurokei (SL-2) no drift ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Joshima, M [Geological Survey of Japan, Tsukuba (Japan); Ishihara, T [Japan National Oil Corp., Tokyo (Japan)

1996-05-01

This paper reports a rapid change in the drift of a sea-gravity meter SL-2 after 1987 and after its modification in 1993. In order to confirm the accuracy of the sea-gravity meter of the Hakurei-maru, changes in the lapse of time were summarized on the relative gravity value at the Funabashi base and on the drift rate in each voyage. The drift rates in the case of departing from and returning to Funabashi base were all less than 0.1mgal/day except the first year of 1987, which was presumably due to the growing stability of the gravimeter. The drift value of 1992 was 0.05mgal/day, producing an error of only 2mgal without drift compensation at the end of a 40 day voyage. The gravimeter after the total renewal of the control part in 1993 produced a large drift in the direction opposite to the conventional drift. The cause of these phenomena was supposed to be some kind of change in the spring property during the gap of one year; this large drift seemed to be settling down after the elapse of approximately one year. 4 refs., 8 figs., 2 tabs.

Present conditions and future tasks of Japan`s ship machinery industry; Nihon hakuyo kogyo no genjo to kongo no kadai ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Akahoshi, S. [Ministry of Transportation, Tokyo (Japan)

1994-09-01

Although Japan`s shipbuilding industry has been maintaining a seat for the first place in the world over 30 years or more in a contract award quantity for the new shipbuilding work, Korea got ahead of Japan and has come to be a top at the first time in 1993. Even though the various factors could be thought, it has become a turning point to be reconsidered how Japan`s shipbuilding industry should be from now on for the naval architects and persons concerned in Japan. While Japan`s production of the maritime industrial products has been in general showing the recovering tendency by a demand restoration of the large scale vessels and so forth since 1987 afterward, on the other hand, affected by an influence of the recession of the world economic activities, the total production amount in 1993 has turned to a little bit decrease and its amount was 831.8 billion yen (a ratio to the previous year: 96.4%). Though a business environment surrounding the maritime industry, in order to successively continue the work shop site inside this country as an important industry through this industry from now on, it is thought that a restoration of the price competition should be made an effort on one hand by a standardization of the maritime equipments and tools making an exclusion of the wastefulness as an object, and a strengthening of the international competitiveness at the non-price aspects such as a functionality of the products, a reliability and so forth is indispensable on the other hand. 6 figs., 3 tabs.

NEDO coal mining structure adjustment subcommittee. 18th project report meeting; NEDO sekitan kogyo kozo chosei bunkakai. Dai 18 kai jigyo hokokukai

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

Concerning the subject matter, a NEDO (New Energy and Industrial Technology Development Organization) director Keishiro Kawamo reports on NEDO's projects designed to smoothly implement the 'new coal policy'. Nobuaki Terasaka, chief of the planning division, coal and new energy department, Agency of Natural Resources and Energy, takes up the current status of the coal policy and the tasks it faces, and discusses, predicting the development of the coal policy, the assurance of stable supply of coal from abroad, development of clean coal technologies that will rightly deal with the world-wide environmental problems, and the international diffusion of the clean coal technologies and the completion of the basement therefor. Concerning the 'development of zeolite-related commodities,' a report is delivered on the manufacture of a soil improving material and a deodorant for fish grill from zeolite found rich in coal layers of Pacific Coal Mine Co., Ltd. Concerning the 'polycrystalline diamond manufacturing project,' a polycrystalline diamond synthesizing method making use of the blasting technique employed at coal mines is reported. (NEDO)

PROBLEMS OF CONSTRUCTING A SOCIOLOGICAL PORTRAIT OF A MODERN STUDENT OF A PROFESSIONAL EDUCATIONAL INSTITUTION

Directory of Open Access Journals (Sweden)

Natalia Valerievna Borodina

2018-02-01

Full Text Available Purpose. The article is devoted to the topical problem of training students of secondary vocational education (SVE in demanded and promising professions and specialties, which at the moment is becoming increasingly important in our country. The article analyzes the notions of “social portrait”, “sociological portrait”. The authors aim to reveal their approach to structuring the mechanism of the sociological portraying of a student studying under programs of secondary vocational education. Methodology. The basis of the research is formed by phenomenological, system, generalized methods, modeling, as well as empirical methods. Results. The results of the work are that the authors have revealed new facets of the problem and obtaining objective knowledge about the peculiarities of the professional expectations and preferences of the students of the SVE in the course of approbation of the research on the topic “The formation of the sociological portrait of the entrants, students and graduates of the SVE educational programs providing training in the most popular, new and prospective professions and specialties of SVE” in Sochi State University. The authors present an approach to improving the mechanism of the sociological portrayal of a student in secondary vocational education. Practical implications. The results of the study can be applied in the field of vocational education and sociological forecasting.

Influence of the Factor of Uncertainty on Development and Implementation of Modern Russian Megaprojects

Directory of Open Access Journals (Sweden)

Inna Vasilyevna Mitrofanova

2016-10-01

Full Text Available The general culture of design, planning and implementation of megaprojects in Russia is underdeveloped. Commercialization of procedures of projects’ justification and the involvement of expert community hinder an objective assessment of risks and efficiency of investment projects, while the aspiration to save money at stages of scientific justifications and skilled and experimental checks, lead often to adventurous decisions and unpredictable consequences. The article’s purpose is to reveal the identification signs of modern territorial megaprojects as important tool of the state strategic management and to reveal a complex of the various risks accompanying processes of development and implementation of large investment projects. The special attention is paid to such types of risk as competence and corruption risks. On the example of modern Russian megaprojects, such as “the Ural Industrial – the Ural Polar”, construction of Olympic objects in the city of Sochi, the authors show that these risks became either the reason of megaproject’s rebranding, or led to essential excess of the actual expenses in comparison with the planned. The authors are sure that identification of possible corruption risks at a predesign stage, accounting of reputation risks, elimination of low competences risks are an important task aimed at decrease of uncertainty of final effect from implementation of the territorial complex megaproject.

New Finds of Painted Ceramics of the Epoch of the Abkhazian Kingdom

Directory of Open Access Journals (Sweden)

Armarchuk Ekaterina A.

2012-03-01

Full Text Available The painted polished red-clay ceramic items of the 8th-10th centuries, found on the Anakopia and other sites of Northern Abkhazia and the adjoining district of the city of Sochi are considered in the article. These are small and medium sized single-handled narrow-necked jugs. The painting is made in dark brown paint. The ornament consists mainly of straight and wavy lines; hatching in the form of oblique grids, braids and patterns of specks occur. Taking into account the new finds made during the 2007-2008 excavations of the necropolis on the Sakharnaya Golovka Mountain and of the church near Veseloye village, the analysis of painted polished ware of the Abkhazian Kingdom epoch makes it possible to determine its territorial and chronological distribution limits. The area of this pottery covers the Black Sea coast from the mouth of the Mzymta river to New Athos. Based on the results of the 1950-1980s excavations, it has been dated to the 8th-10th centuries; however, the new materials allow restricting the interval to the 9th-10th centuries. The differences in the vessels manufacturing technology indicate the presence of at least two production centers. The small painted burnished jars discovered in Christian graves suggest that they had been used to store incense or chrism.

CURRENT TRENDS OF THE PROVISION FOR RADIATION SAFETY OF THE POPULATION OF THE RUSSIAN FEDERATION

Directory of Open Access Journals (Sweden)

G. G. Onishenko

2014-01-01

Full Text Available P.V.Ramzaev”The article is devoted to the actual issues ofRussian Federationpopulation radiation safety providing at the present stage. The important role of radiation-hygienic passportization is underlined in the process of the obtaining of objective information of radiation situation in the country, of population exposure doses from the all sources: artificial and natural, from the use of ionizing irradiation sources in medicine. The leading role is shown of the natural ionizing irradiation sources in the level of the country population exposure. The main directions of activities are stated aimed on the decreasing of population exposure doses from the natural sources. The brief characteristics is given of the radiation situation on the territories radioactively contaminated after the accident on the Chernobyl NPP, in the Pacific Ocean basin after the accident on the “Fukushima-1”NPP, of the main measures for radiation protection providing and for counteraction to radiation terrorism during the period of international sports and mass actions which were carried out in Russia in the last years (XXVII World Summer Universiade in2013 inKazan, XXII Olympic and XI Winter Paralympics Games in2014 inSochi. The most important tasks are defined for the improvement ofRussian Federationpopulation radiation safety at the present stage.

Construction method with prestressed connection of precast prestressed concrete using composite slab with multi-round opening web. Bibai factory office building of Dopi Kensetsu Kogyo Co; Web bu ni renzoku enkei kaiko wo yusuru PC gosei yukaita wo mochiita PC kumitate koho. Dopi kensetsu kogyo (kabu) Bibai kojo jimushoto shinchiku koji

Energy Technology Data Exchange (ETDEWEB)

Kuramochi, H.; Nakai, J.; Arai, S.; Toriya, T.

1997-07-31

This report summarizes the experimental result on the structural performance of precast prestressed concrete (PC) composite slab work, and a construction method with prestressed connection of PC. Although a double T type precast PC slab (DT board) is frequently used as buried form for slabs, it requires extremely complex bar arrangement and complicated works. The reinforcement method of supports using deformed hair pin type bars was thus devised which has a structural performance higher than that of the previous methods as well as simple bar arrangement and superior workability. For the reinforced DT board (DP slab) and the composite slab construction method using the DP slab, the structural safety and retained use environment were confirmed by structural performance test and construction test. The foundation and footing beam of the Bibai factory office building were constructed by the conventional method considering the construction method, while the column, beam and floor by this method using PCa members. The upper building frame was thus completed for as short as 23 days. 5 refs., 15 figs., 4 tabs.

Development of electric power transmission line anomaly approaching alarm system. Sodensen ijo sekkin keiho sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Kusaba, Masaro; Tabata, Takatoshi; Miyazaki, Shusuke [Kyushu Electric Power Co., Inc., Fukuoka (Japan)

1989-03-30

In order to plan preventive measures from the occurrence of electric power transmission line accident, a power transmission line anomaly approaching alarm system was developed to automatically alarm the operators and surveillants. The surveillance system, composed of camera, surveillance unit proper and alarm receiving portion, generates alarm and indicate hazard to the operators, when animal invades a hazardous area designated on the monitor. Wireless telegraph for the alarm transmission use used frequency around a 322MHz band with the Radio Ray law and preventive measures from noise, taken into consideration. The prototype is characterized by unnecessary ancillary fitting to the surveillance object, rare erroneous operations and high reliability. While the hazardous area can be simply designated, changed and released, as made by volume on the control panel. It is moreover easy to designate, as done by confirming the surveillance object on the display. It is also possible in multidimensional surveillance and easy to use on site. 7 figs.

Achievement report for fiscal 1998. Esophageal vocalization aid system; 1998 nendo seika hokokusho. Shokudo hassei hojo sochi

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Development has been made on element technologies for an esophageal vocalization aid system. With regard to the speaker, selection and trial production were performed on a speaker used for a phono-coupler to be used in coupling with a telephone transmitter. Performance not differing from that in the currently used telephone set was obtained in the overall characteristics evaluation using a dummy telephone circuitry. For the microphone, two kinds of hands-free microphones were fabricated on a trial basis. In order to develop pitch extraction and amplitude pitch conversion systems, pitch extraction performances were compared and discussed on the following five methods: the auto-correlation method, the Cepstram method, the average magnitude difference function (AMDF) method, the simplified inverse filter tracking (SIFT) method, and the time-domain excitation extractor using minimum perturbation operator (TEMPO) method. The hauling phenomenon, having come up as a problem in an auxiliary digital device, was analyzed to discuss methods for prevention thereof. In developing a voice/unvoiced distinction judgment method, a method using low domain power and high domain power was discussed. Development has been made on exclusive ICs, a voice analyzer, and the using feeling enhancing technology. In developing a total system, a digital unit incorporated esophageal vocalization aid system was developed and improved. (NEDO)

Competition policy in patent cases and antitrust.

Science.gov (United States)

Sobel, Gerald

2003-01-01

The article that follows examines the competition policy reflected in the decisions of the Court of Appeals for the Federal Circuit in its patent cases. The court's views on this subject have been manifested most plainly in decisions that have transformed the law concerning infringement under the doctrine of equivalents and claim construction. In both categories, the court narrowed patent scope by reason of its desire to protect competitors. The article argues that the court's premise in prescribing narrower claim scope reflected an incomplete view of competition policy. The court's analysis overlooked the benefits to competition provided by patents, which stimulate inventions and their development. The article traces the development of antitrust jurisprudence and demonstrates how respect for the contribution of patents to competition and skepticism of free-riding has evolved, particularly beginning in the 1970s. The article draws a parallel between the Court's reasoning about competition policy, on the one hand, and the rejected views of Justices Hugo Black and William O. Douglas and abandoned patent-antitrust jurisprudence, on the other. The Federal Circuit's decision in Festo Corp. v. Shoketsu Kinzoku Kogyo Kabushiki Co., Ltd., 234 F.3d 558 (Fed. Cir. 2000), on the subject of equivalents is considered in the paper. In that decision, the majority adopted a new rule that completely barred infringement under the doctrine of equivalents of any claim limitation where, in prosecution, there had been a narrowing amendment relating to patentability. In the past, prosecution estoppel foreclosing equivalents had been subject to a "flexible bar," which, in some circumstances, allowed for equivalence notwithstanding such an amendment. The article points out that because almost all patents are amended during prosecution, the effect would be to allow widespread copying of patented inventions by trivial modifications of any narrowed claim limitation. The incentive to innovate

Development of ultra low dew-point clean air generator; Cho tei roten seijo kuki hassei sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Nishimura, H.; Okamura, N. [Takasago thermal Engineering Co., Ltd., Kanagawa (Japan)

2000-05-10

To reduce the manufacturing cost of semiconductors, some systems have been proposed that use a cheap and high purity Clean Dry Air (CDA). CDA can reduce process step such as wafer cleaning, because CDA flow in stocker prevents the wafer surface from adsorbing of moisture and organic impurities. We have already optimized a two-stage rotary dehumidifier and have conducted a study of methods for cheaply manufacturing air that has a low dew-point of -70 degree C to -50 degree C. We have further developed the method in which a dry dehumidifier is used, and developed an ultra low dew-point air generator. The air generator is a three-stage rotary dehumidifier in which a further stage is added to the two-stage rotary dehumidifier. The main component of the rotors is metal silicate. The air generator can supply dry air with a dew-point of -110 degree C. or less, in which the concentration in all gaseous contaminants is far below 1 ppb. We made a trial calculation of the manufacturing cost, and an average cost of 0.25 yen/m{sup 3} was obtained. (author)

Fundamental characteristics of new electric power storage equipment celled `ECS`; Atarashii denryoku chozo sochi `ECS` no kisoteki tokusei

Energy Technology Data Exchange (ETDEWEB)

Okamura, T.; Yamagishi, M.

1997-01-30

This paper introduces new electric power storage equipment called an energy capacitor system. A special electrically double-layered capacitor with its energy density raised in sacrifice of internal resistance has the current so adjusted that loss will not increase by using a switching converter (consisting of a charger and a current pump). The capacitor is charged and discharged at high efficiency. Upper limits of the charge voltage for each capacitor are connected with parallel monitor circuits so that maximum charge voltage of each capacitor will be aligned at one level, wherein charge and discharge are performed with that voltage used as the starting point. A drawback in a capacitor is lower energy density than in a secondary battery. Therefore, high voltage withstanding organic electrolyte was used, and electrode activated carbon was given discussions starting from its raw material structures. The efforts resulted in obtaining as high energy density as 43 Wh/kg (about 20 times as much as in conventional materials, and comparable to lead-acid batteries). In order to minimize heat generation due to the increased internal resistance, a switching converter was used to suppress charge/discharge currents to the minimum required levels. Although the capacitor still has insufficient voltage withstanding power and short life, the energy density is increasing beyond the initial estimation. The next problem to be solved is reduction in production cost for its industrialization. 4 refs., 4 figs., 2 tabs.

Solar cell element, solar cell system, and illuminating system; Taiyo denchi soshi, taiyo denchi sochi oyobi shomei system

Energy Technology Data Exchange (ETDEWEB)

Oka, Y. [Toshiba Laytech Co. Ltd., Tokyo (Japan)

1997-12-12

This invention relates to provision of a photocatalytic film on the light intercepting surface for the solar cell substrate of the solar cell element, which transmits the lights in the wavelength region longer than ultraviolet, i.e. 410nm and longer wavelength lights, and intercepts the lights in ultraviolet wavelength region. This photocatalytic film retards the decrease in the light interception by the solar cell element, and simplifies the maintenance because it oxidizes and decomposes organic matters by the less than 410nm ultraviolet ray contained in the sunlight to prevent adhesion of organic substance on the light intercepting surface of the solar cell element. In addition, decomposed dirt composition is washed away to accelerate dirt removing performance by rain waterdrop adhesion on the intercepting surface when it is used outdoors. As to this photocatalytic film, the thickness from 0.01 to 0.5{mu}m is desirable, effective phtocatalytic activity can not be expected if the thickness is less than 0.01{mu}m, and transmission factor becomes smaller if the thickness exceeds 0.5{mu}m, producing no electromotive force. TiO2, ZnO, and FeTiO3 are used as such photocatalyst. 6 figs.

New biological deodrization device using dried activated sludge. Kanso odei wo mochiita shinki seibutsu dasshu sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Hatakeyama, S.; Nagayasu, K.; Suwa, T.; Hayashitani, M.; Ito, H.; Habata, K.; Kitakaze, T. (Kawasaki Heavy Industries, Ltd., Tokyo (Japan))

1993-10-20

The new biological deodorization device was developed using dried activated sludge as deodorant. Activated sludge obtained from a waste water treatment plant was dried at room temperature to protect from extinction of microorganisms in it before its charge into the device, and washed by water only as required. Offensive odor substances were oxidation-decomposed by microorganism after their adsorption into sludge surfaces, while microorganisms survived for a long time while getting such substances as nutritive sources. As basic deodorization characteristics were studied with the experimental device and artificial odor gases, more than 99% of 200 and 2,000 ppm H2S were removed at space velocities of 400/h and 33/h, respectively, together with nine typical offensive odor substances. As the result of demonstration tests with the small test device installed in a public waste water treatment plant, a high deodorizing efficiency was retained for 10 months or more, and its running cost was as low as 75% of that of current systems because of only one necessary washing every month. 3 refs., 14 figs., 12 tabs.

Development of electrostatic charging evaluation equipment for automobile seat; Jidoshayo seat no taidensei shiken hyoka sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Maeda, K [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

When passengers get out of vehicle, electrostatics is generated by separation of seat cloth and passenger cloth, and then charged to passenger`s body. It has been impossible for us to simulate this induction charging phenomenon with current evaluation equipments. We developed a new seat cloth evaluation equipments using induction charging plate, which enables us to simulate the phenomenon. This paper describes this new electrostatic charging evaluation method for automobile seat cloth. 5 refs., 6 figs.

The Interference of Politics in the Olympic Games, and How the U.S. Media Contribute to It

Directory of Open Access Journals (Sweden)

Anthony Moretti

2013-12-01

Full Text Available In February 2014, Russia will host the Olympic Games for only the second time in its history. Once again, the Olympic spirit—as defined and espoused by the International Olympic Committee—will clash with the political interests that overshadow the Games. This paper examines the political undertones of the 1980 Summer Olympics, hosted by Moscow and which took place during an ice-cold period of the Cold War, and asks whether similar undertones will be on display next year. The 1980 Games were a phenomenal success for Soviet athletes and their Eastern European colleagues. However, in the absence of the United States and more than 50 other nations, the political frame from a Western context was that of athletes from a corrupt system competing alongside their comrades. The boycott of these Games demonstrated the power of the White House and the often lapdog quality of the American media. Now as the Games return to Russia, the issue of whether a Cold War-like mentality will influence U.S. media reporting of the 2014 Sochi Olympics must be asked. The conflicting images in Western news media discourse of Russian president Vladimir Putin and his “Communist past” combined with a tepid diplomatic relationship between his government and the Obama administration provide evidence that a negative portrayal of Russia and therefore its athletes will be displayed in February 2014. And yet there is no impetus for a boycott next year. This paper explores why.

Same Citius, Altius, Fortius…more women, crashes, and McTwists?

Science.gov (United States)

Seiler, Stephen

2014-01-01

Almost half of the record 98 events being held at the 2014 Sochi Winter Olympic Games were either not held 20 years ago at Lillehammer or have been substantially modified. The Olympics as a global sports event are not stationary but must adapt and evolve in response to changing demands, just as the remarkable athletes who are competing do. While the Winter Olympics program has steadily grown since Chamonix in 1924, the rate of development has greatly accelerated in the last 20 years. Three factors seem to be instrumental. First, the Winter Olympics program has become more gender balanced. Female hockey teams are battling for gold, and this year women will compete in ski jumping for the first time. Most Winter Olympics sports have equal numbers of events for men and women today, although female participation still lags somewhat behind. Second, many traditional events have been modified by sport-governing bodies toward a more "TV friendly" format. Time-trial starts have been replaced by mass or group starts. "Sprint" and team events have been added to spice up traditional sports like cross-country skiing and speed skating. Finally "extreme" sports like half-pipe and ski-cross have crossed over from the X Games to the Olympics, with some arguing that the Olympics need these popular sports more than the X Games sports need the Olympics. All of these changes create new research questions for sport scientists who are also willing to adapt and evolve.

A reappraisal of success factors for Olympic cross-country skiing.

Science.gov (United States)

Sandbakk, Øyvind; Holmberg, Hans-Christer

2014-01-01

Cross-country (XC) skiing has been an Olympic event since the first Winter Games in Chamonix, France, in 1924. Due to more effective training and tremendous improvements in equipment and track preparation, the speed of Olympic XC-ski races has increased more than that of any other Olympic endurance sport. Moreover, pursuit, mass-start, and sprint races have been introduced. Indeed, 10 of the 12 current Olympic competitions in XC skiing involve mass starts, in which tactics play a major role and the outcome is often decided in the final sprint. Accordingly, reappraisal of the success factors for performance in this context is required. The very high aerobic capacity (VO2max) of many of today's world-class skiers is similar that of their predecessors. At the same time, the new events provide more opportunities to profit from anaerobic capacity, upper-body power, high-speed techniques, and "tactical flexibility." The wide range of speeds and slopes involved in XC skiing requires skiers to continuously alternate between and adapt different subtechniques during a race. This technical complexity places a premium on efficiency. The relative amounts of endurance training performed at different levels of intensity have remained essentially constant during the past 4 decades. However, in preparation for the Sochi Olympics in 2014, XC skiers are performing more endurance training on roller skis on competition-specific terrain, placing greater focus on upper-body power and more systematically performing strength training and skiing at high speeds than previously.

Zheltozems of Russia: Micromorphology, clay minerals, and pedogenetic analysis Zheltozems de Rusia: micromorfología, minerales de la arcilla y análisis edafogenético Zheltozems da Russia: Micromorfología, Minerais de Argila e Análise Pedogenética

Directory of Open Access Journals (Sweden)

Maria Gerasimova

2013-11-01

Full Text Available Zheltozems (literally "yellow earths" that can be classified as Acrisols, Alisols, or Ultisols, occupy very small areas in Russia; they are strongly modified by human activities. The unchanged profiles are preserved only locally, in particular, in the Sochi arboretum. When compiling the soil map of the arboretum, different Zheltozems were described on gentle and moderately steep slopes and diverse parent materials: calcareous claystone and its heavy-textured derivates. The micromorphology of three characteristic Zheltozem profiles developed on these different parent materials was also studied. The features that they have in common are the following: in all profiles, a specific heavy-textured Bw, or BM 'metamorphic' horizon was identified with a certain set of micromorphological properties: a massive microstructure with fine planes merging into deformed biogenic pores, a monic groundmass with few silt grains that are sometimes oriented, and impregnative iron-oxides pedofeatures. The b-fabric was defined as stipple speckled, poro- and granostriated, locally (monostriated ressembling stress coatings. There are almost no clay coatings except for very few fine internal ones that are light yellow and homogeneous; clay and iron pseudomorphs (alteromorphs occur over some skeleton grains. Many of these properties are related to the clay mineral composition. There are varying quantities of smectites and kaolinite-smectites, whereby the former increase with depth. The presence of expanding minerals is known to contribute to the disintegration of coatings. Remnants of these are observed in typic iron-manganic nodules. In terms of WRB, this horizon is an intergrade between cambic and argic, which is not accounted for in soil diagnostics. As three different Zheltozems are studied in the same area, the following genesis of this specific intergrade can be given. The saprolite in one of the profiles is composed of fragments of weathered calcareous argillites

Treatment of exhaust gas from the semiconductor manufacturing process. 3; Handotai seizo sochi kara no hai gas shori. 3

Energy Technology Data Exchange (ETDEWEB)

Fukunaga, A. [Ebara Research Co. Ltd., Kanagawa (Japan); Mori, Y.; Osato, M.; Tsujimura, M. [Ebara Corp., Tokyo (Japan)

1995-10-20

Demand has been building up for an individual dry type scrubber for treating exhaust gas from the semiconductor manufacturing process. Some factors for the wide acceptance of such a scrubber would be the capability for complete treatment, easy maintenance and safety features, etc. Practical gas analysis and optimum scrubbing techniques would have to be applied, as well as effective monitoring, alarm, and fail-safe techniques. The overall exhaust gas line, i.e. the line connecting the scrubber system and the upstream process, including that extending to pump system, has to be fully considered for enabling effective scrubbing performance. Such factors, which have until now not been given any priority, would have to be fully studied for the development of a practical, individual dry type scrubber. Cooperation on this matter from the semiconductor manufacturing industry would also be essential. 6 refs., 3 figs., 5 tabs.

Estimation of Seasonal Efficiency of Sochi Resort Climate Therapy by Means of Psychologic Testing of Patients with Cardiometabolic Pathology

OpenAIRE

Irina N. Sorochinskaya; Andrei V. Chernyshev

2012-01-01

Cardiovascular diseases are major reasons for population mortality in majority of countries, including Russia. Metabolic syndrome is considered to be one of the main pathologic states, leading to enhancement of atherogenesis, ischemic heart diseases and cerebrovascular diseases. Physical methods, including resort treatment play great role in metabolic syndrome prevention and treatment. Climate therapy depends on resort climate and season and is a major component of resort treatment. Psycholog...

Charcterized surpervisory control system for elevators and its support equipment. Elevator koseika gun kanri system to sono shien sochi

Energy Technology Data Exchange (ETDEWEB)

Tobita, T.; Fujino, A.; Yoneda, K.; Ueshima, T. (Hitachi Ltd., Tokyo (Japan))

1991-12-20

Objective of elevators plural control system for performing the operation control of multiple elevators is to improve the service to users. The service improvement toward a conventional plural control system is mainly to reduce waiting time on the riding floor from the calling button being pushed till elevator reaching the riding floor. Subsidiary to it, merely energy-saving is carried out. In the present study, a characterized supervisory control system was developed to make plural supervisory control receiving the requests from users to reduce not only the usual waiting time but also riding time and congestion inside. In order to meet the requests of users, a characterized support equipment was produced dialogically by combining fuzzy ratiocination, production system as well as simulation. The effects thereof were confirmed. 12 refs., ll figs., 2 tabs.

Activity of environmental, safety and hygiene on Dainippon Ink and Chemicals, Inc., Tokyo plant; Dainippon Ink Kagaku Kogyo (kabu) Tokyo kojo no kankyo hoan katsudo

Energy Technology Data Exchange (ETDEWEB)

Nagai, T. [Dainippon Ink and Chemicals, Inc., Tokyo (Japan)

1998-06-15

This plant exists along Route 17 in Itabashi-ku, Tokyo adjacent to Saitama prefecture, and started operation in Nov. 1937 to produce printing ink, varnish for ink, paint for cans, paint for PCM and paint for incombustible building materials. Five hundred employees and more than 100 stationed workers from cooperative companies work in the plant. Disasters of the plant are drastically on the decrease. The plant achieved a non-disaster duration of nearly 9.7 million hours, and no accidents and disasters for nearly 10 years at the end of Feb. 1997. Safety and quality control are in promotion by top-down system through the organization and bottom-up activity by small groups. The experience meetings of safety and QC circle activities are held in spring and autumn every year to spread the results among employees. In addition, selective activities are made by top-down system at marked points to prevent accident and disaster, and a mannerism in circle activity. Environmental ISO was also introduced for further improvement of an environmental protection control system. 1 fig.

SPIDERS (ARANEI IN HEPRETOBIONT MESOFAUNA OF THE NORTHWEST CAUCASUS

Directory of Open Access Journals (Sweden)

A. V. Ponomarev

2014-01-01

Full Text Available Abstract. Aim. We discussed in previous work a herpetobiont fauna of arachnids (Arachnida from the isolated yewboxwood wood, located in the Caucasian State Biosphere Reserve, 20 km near Sochi (Ponomarev, Chumachenko, 2007. The aim of the paper is to summarize available data about herpetobiont araneofauna of the Northwest Caucasus. Location. Republic of Adygea, Russia.Methods. Material was collected in 2009 on north macroslope of Main Caucasian Ridge within the territory of the Caucasian State Biosphere Reserve between 1000–1820 m. The following plant communities are studied: beech-silver fir (assotiation Abieti-Fagetion orientalis Korotkov et Belonovskaya 1987, maple forest (assotiation Petasito albae-Abietetum nordmannianae subassotiation Aceretosum trautvetteri Francuzov 2006, subalpine meadow (assotiation Poa longifolii – Calamagrostietum arundinaceae Semagina, 1992. Soil traps were used for collection of spiders.Results and main conclusions. During the period of study 100 species of spiders from 19 families are registered. Most diverse araneofauna of subalpine meadows includs 54 species belonging to 14 families. The least diverse araneofauna is in maple forest (24 species of 7 families. In beech-silver fir includes 45 species of 16 families of spiders. Only 3 species (Pireneitega ovtchinnikovi, Cybaeus abchasicus, Tenuiphantes mengei were found in all surveyed habitats. These 3 species clearly tend to forest habitats. Herpetobiont araneofauna of the Northwest Caucasus characterized by high taxonomic diversity with clear predominance of representatives of the family Linyphiidae. Specificity of araneofauna in different types of plant communities is high.

FY1995 study of feedback type gait training system; 1995 nendo feedback gata hoko kuren sochi ni kansuru kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The purpose of this project is to develop and demonstrate the utility of feedback type gait training equipment designed for the measurement and evaluation by a walking training of the aged or patient. As similar concepts of walking training, a locomotion in the water for the aged is applied in rehabilitation. Our development of this study established the system of a suspending mechanism which revolves around the prop, and a walking on the circular type force plate by the aged or patient. It is possible to detect a walking reaction force of several patients from force plate simultaneously. And then, the data from force plate makes feedback signal to put up the patient like a buoyancy in the water. Concerning the evaluations of walking pattern a step range, a hanging ratio and a walking speed, etc. are acquired for each patient by the acknowledgment base. This system is actively able to perform a walking training continuously compared with conventional passive gait equipment. (NEDO)

Waste treatment of ships. Change in understanding of wastes and trend of waste treatment systems; Senjo no haikibutsu shori. 1. Haikibutsu ni taisuru ninshiki no henka to shori hoshiki no doko

Energy Technology Data Exchange (ETDEWEB)

Inatomi, M. [Hitachi Zosen Corp., Osaka (Japan)

1996-07-25

This paper explains treatment of wastes produced in ships. Wastes produced in ships should be essentially treated on ships. Since storage and transport of difficult-to-treat wastes to harbor for land treatment is expensive, wastes produced in ships are treated on ships as much as possible. Combustibles such as waste oil, plastics, paper and wood fiber waste are treated by incinerator. Food waste is dumped into the sea after crushing by disposer. Excrement and urine are dumped into the sea through a waste water treatment plant. Oil content in oily bilge is burned after heating and vapor separation. Food waste is temporarily stored in ships because its dumping along the coast and into harbor is impossible. Kitchen refuse decomposer utilizing bacteria was proposed for ships. Press for used cans and crushing/thermal compaction/storage equipment for plastics were also put on the market. The primary regulation on diesel engine exhaust gas may be cleared by improvement of engine bodies. 1 ref., 1 fig., 1 tab.

Study of seismic data acquisition using physical modeling system; Butsuri model jikken sochi wo mochiita data shutoku gijutsu ni kansuru kento

Energy Technology Data Exchange (ETDEWEB)

Tsukui, R; Tsuru, T [Japan National Oil Corp., Tokyo (Japan). Technology Research Center; Matsuoka, T [Japan Petroleum Exploration Corp., Tokyo (Japan)

1996-10-01

For the physical modeling system of Technology Research Center, Japan National Oil Corporation, data acquisition on the ocean and ground can be simulated using models. This system can provide data for verification of the data processing and elastic wave simulation algorithm. This can also provide data for decision of experiment specifications by making a model simulating the underground structure of the given test field. The model used for the physical modeling system is a gradient multilayer model with six-layer structure. Depth migration before stacking was conducted using data obtained through two acquisition methods, i.e., up-dip acquisition and down-dip acquisition. The depth migration before stacking was performed for data obtained by up-dip acquisition in addition to the records obtained by down-dip acquisition. Consequently, a definite reflection surface was observed, which has not been observed from the processing results of down-dip acquisition data. 9 figs.

Study of seismic data acquisition using physical modeling system; Butsuri model jikken sochi wo mochiita data shutoku gijutsu ni kansuru kento

Energy Technology Data Exchange (ETDEWEB)

Tsukui, R; Tsuru, T [Tech. Research Center, Japan National Oil Corp., Tokyo (Japan); Matsuoka, T [Japan Petroleum Exploration Corp., Tokyo (Japan)

1996-05-01

The Physical Modeling System introduced into the Technology Research Center, Japan National Oil Corporation, and data collected by use of the system are presented. The Physical Modeling System is 10,000 times smaller than the real one, comprising a water tub section, measuring device section, and control section, etc. The water tub section comprises a tub for housing the model, transducers for transmitting and receiving vibration, controllers, etc. The water tub measures 1.8{times}1.2{times}0.9m. The model used in the experiment is an `inclined multilayer model` with each of its six layers pinching out toward the top, and is usable for the comparison of various migration methods. In one case in the records, reception was made at 184 reception points deployed at intervals of 3mm, when the minimum offset was 15mm and the maximum offset 564mm. Nothing very obvious was observed when the ordinary overlapping of DMO and CDP was applied to this record, which suggests that pre-overlapping migration treatment is required. 5 figs.

Photovoltaic AC fusion converter (PVAC). Design consideration and experimental evaluation; Taiyoko hatsuden denryoku/shoyo denryoku kongo sochi no hoshiki to seino

Energy Technology Data Exchange (ETDEWEB)

Tsuchiya, Y. [Hachinohe National College of Technology, Aomori (Japan); Sakakibara, T. [Toyohashi University, of Technology, Aichi (Japan)

1997-11-25

The photovoltaic AC fusion converter (PVAC), of which cost reduction of the total system is possible, was developed. PVAC controls the supply of commercial power by preferentially supplying photovoltaic power to loads for realization of energy conservation. Further, setting the maximum output of solar cell less than the rated load, the system was made the one with no need of storage batteries. This system was realized in a hybrid of the conventional rectification technology and the stand-alone maximum power point tracking photovoltaic system technology. The solar cell input efficiency had been measured as 84% at maximum. Main losses are consumption power of power source, switching loss of inverter, and continuity loss of diode. Ninety-seven percent of the commercial power input efficiency was obtained. Main losses are consumption power of power source, continuity loss of diode bridge, and resistance loss of smoothing reactor. The effect of energy conservation by the use of PVAC was also admitted. 6 refs., 7 figs.

Output characteristics of floating type wave power generator system using a ball screw; Fuyugata nejishiki haryoku hatsuden sochi no shutsuryoku tokusei

Energy Technology Data Exchange (ETDEWEB)

Abe, T; Omata, K [Meiji University, Tokyo (Japan)

1996-10-27

A floating type wave power generator system using a ball screw is proposed. Output characteristics are simulated on the supposition of its employment aboard a navigational aid buoy. The relative linear movement produced by waves between the main body and float is transmitted via a load column to a ball nut and is converted into a rotary movement of a threaded shaft engaging the ball nut. Attached to the bottom end of the threaded shaft is a one-way clutch which connects to the generator axle when the relative velocity between the float and main body is positive. The simulation was conducted for a wave activated power generation buoy, 2.6m in outer diameter, 4.5m in length, and 6000kg in total mass. The buoy generated a mechanical output of 340kW when exposed to a sinusoidal wave 2.5 seconds in period and 40cm in wave height. A tank test was performed using a reduced scale model consisting of a ball screw, bicycle dynamo, and float, with the main body being 318mm in diameter and 833mm in length, when an average output of 4.51W was obtained at 60% efficiency. The results of the experiment agreed in some degree with the results of calculation, verifying the righteousness of the theoretical formula. 3 refs., 7 figs., 4 tabs.

Investigation into the analysis method of total ecobalance in chemical industry products. 3; Kagaku kogyo seihin ni okeru total eko balance no bunseki shuho ni kansuru chosa. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

For the purpose of establishing a total life-cycle ecobalance analysis (LCA) method, the paper studied making of a general computer program for chemical industry products. The study has been made on general-purpose plastics (PET/PSP (polystyrene paper)) since fiscal 1993 aiming at making the CO2 emission computing program covering the entire process of production from extraction of raw materials through waste disposal. In fiscal 1995, the following were conducted for enhancement of generalization of the method: expansion of environmental load items and increase in validity of the concept, and expansion of database. Notice was taken of not only CO2 but SOx, NOx and water quality load items. The survey was made on the recycling situation in Japan and abroad and the PET recycling plant , and environmental load item data are collected to expand database. The program was verified by analyzing an example of reusing PET bottle to carpet, and one-step development can be made toward the establishment of the method. Moreover, an analysis was made for the environmental assessment of the related programs abroad, and a tentative original plan can be proposed for the standardization of environmental load analysis and the integrated assessment method. 39 refs., 130 figs., 76 tabs.

Report on coal refining and chemical equipment analogous to coal liquefaction equipment in fiscal 1981. Maintenance of equipment for direct desulfurization, indirect desulfurization, and fluidized catalytic cracking; 1981 nendo sekitan ekika ruiji seiyu seisei oyobi kagaku sochi ni kansuru chosa hokokusho. Chokudatsu, kandatsu, ryudo sesshoku bunkai sochi no hozen

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-07-01

This questionnaire survey was intended to investigate the actual state of maintenance such as materials used, conditions for use, anti-corrosion measures, and cases and handling of damage, concerning primary apparatus in the direct/indirect desulfurization equipment and the fluidized catalytic crackers, which are owned by each oil refinery and which are analogous to coal liquefaction equipment. The questionnaire was intended for the following equipment and apparatus, with the actual state of their maintenance investigated. 1. Questionnaire concerning maintenance of direct desulfurization (reactor, high temperature separation tank, material furnace tube, reactor exit piping, high temperature heat exchanger, low temperature heat exchanger, and pressure reducing valve), 2. Questionnaire concerning maintenance of indirect desulfurization (reactor, high temperature separation tank, material furnace tube, reactor exit piping, high temperature heat exchanger, low temperature heat exchanger, and pressure reducing valve), 3. Questionnaire concerning maintenance of fluidized catalytic cracker (reactor, regeneration tower, riser pipe, and fractionator bottom pump). The questionnaire this time was distributed to 27 domestic oil companies, with the reply received from 23 of them. The replies were summarized by each type of equipment. Shown at the back of the report were the cases of damage and handling in FCC's and reactors. (NEDO)

Sociodemographic profile of an Olympic team.

Science.gov (United States)

Lawrence, D W

2017-07-01

To document the distribution of sociodemographic markers (race and relative access to wealth) in athletes participating at the summer and Winter Olympic Games (OGs). Cross-sectional descriptive epidemiological study. Sociodemographic data were collected from publically available resources for all athletes representing four countries (Canada, United States of America, Great Britain and Australia) at the 2014 Sochi Winter OGs and 2016 Rio Summer OGs. The prevalence of white and privately educated athletes were identified for each sport, country, and team with consideration and comparison to the general population. Access indices (i.e. the combined race socio-economic access index [CAI]) were developed to describe the relative distribution of white and privately educated athletes representing each sport, country and team compared to the respective general population. A total of 568 winter and 1643 summer athletes were included in this study. Privately educated athletes constituted 30.3% and 32.7% of winter and summer athletes, respectively; while 94.9% of winter and 81.7% of summer athletes were white. The CAIs of the Canadian, American, British and Australian winter Olympic teams were 0.52, 0.42, 0.61 and 0.45, respectively. The CAIs, for the Canadian, American, British and Australian summer Olympic teams were 0.89, 1.13, 0.82 and 0.83, respectively. Summer and winter sports with the greatest and least racial and socio-economic biases were identified. Racial and socio-economic biases were identified in both summer and winter Olympic sports; predominantly favouring white and privately educated Olympic athletes. These findings prompt further inquiry into barriers for sport-specific participation and advancement, in addition to the practice of providing substantial public resources in support for Olympic sports and athletes. Copyright © 2017 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

The Role and Place of State of Event-Strategic Megaobjects in the Sustainable Territorial Development of the Russian Federation

Directory of Open Access Journals (Sweden)

Vladimir Yuryevich Ivanov

2016-12-01

Full Text Available Russia is actively trying to raise its image and rating in the international political, sports and social spheres. This can be achieved by hosting major All-Russian and international events such as APEC 2012 summit, the 2013 Summer Universiade, the XXII Olympic Winter Games and XI Paralympic Winter Games 2014, FIFA 2018, 2019 Winter Universiade etc. We point to the absence of complex scientific approach to managing such event-strategic megaobjects, and this has negative affect on the Russian economy. The subject of the present research is represented by the role of state event-strategic megaobjects in sustainable regional development of Russia. The analysis allowed to identify a number of features of these objects, and to point out key issues and risks in their implementation. We consider the use of innovative crowdfunding technology to be the positive aspect of public megaobjects’ management. The negative aspects include the excessive scale of the financial costs and problems of cost-effective use of megaobjects after the hosting events. The territorial aspect of the analysis revealed the absence of a systemic approach to the selection of regions for hosting international events, as well as the unevenness of the territorial distribution of megaobjects. The largest event-strategic megaobjects were implemented in the Far Eastern Federal district (APEC summit in Vladivostok in 2012, the Southern Federal district (Krasnodar region, Sochi – The winter Olympic and Paralympic games in February 2014, Volga Federal district (the Universiade in Kazan in 2013. These districts did not become the leading regions in socio-economic development of Russia neither before nor after these events. The studies of such socio-economic and political phenomena will help to present theoretical and practical aspects of their application algorithm in the future for the purpose of balanced regional development of Russia.

Velocity distribution of women's 30-km cross-country skiing during Olympic Games from 2002-2014.

Science.gov (United States)

Erdmann, Wlodzimierz S; Dancewicz-Nosko, Dorota; Giovanis, Vasilios

2017-12-01

Within several investigated endurance sport disciplines the distribution of load of the best competitors has a manner of evenly or slightly rising velocity values. Unfortunately many other competitors have usually diminishing values or when they are very poor they have evenly values. The aim of this study was to investigate distribution of velocity within 30-km cross-country female skiers. Cross-country skiing runs were investigated of Olympic Games 2002-2014 (Salt Lake City, Turin, Vancouver, Sochi). At every race two 15 km or three 10 km loops of the same vertical profile were taken into account. The competitors were divided onto: A - winners, B - medallists, C - competitors who obtained places 4 to 10 at the finish line (medium runners), D - competitors who obtained places 11 to 30 at the finish line (poor runners). Velocity data presented on the web pages of several institutions were utilized. The competitors had their velocity distributed in a manner with usually diminishing values. While comparing velocity of sequential loops with the mean velocity the difference for the poor runners reached the value of almost 6 %, which was too high. There was significant (usually negative) correlation coefficient between values of velocity deviation for the first and second loops and the mean value of velocity for the entire distance for the better runners and mixed, i.e. positive and negative values for the poorer runners. It was postulated investigations of velocity distribution should be introduced in coaching in order to inform competitors about their running. This advise is especially important for the poorer runners. Up to now cross country skiers run for themselves. It should be discussed whether the tactics used by road and track runners, i.e. running with pace makers, can be introduced in cross country skiing. Also the use of a drone during training can be used in order to maintain proper pace.

High-frequency CSMT (HFCSMT) survey system for fine resistivity structures in the shallow subsurface; Hyoso hiteiko seimitsu sokutei sochi (HFCSMT) no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Handa, S [Saga University, Saga (Japan); Kinoshita, T; Kozato, T [Construction Project Consultant Co. Ltd., Osaka (Japan)

1997-10-22

HFCSMT system has been developed to enhance resolution in CSMT technology. The system covers a frequency band of 1.4kHz-106kHz for transmission, and measurement is performed using 16 frequencies. The transmitter power amplifier operating on a 12V cell is capable of a maximum output of approximately 3A, and the signals can be received at points several 100s of meters away. As for the selection of frequencies, synchronization is ensured for the receiver set no matter what instant the measuring process is commenced, the process being fully automated including the gain control. Phase and amplification values obtained for the electric and magnetic fields are subjected to A/D conversion. The data are stored in the microcomputer memory as apparent resistivity and phase data, and are forwarded to the host computer upon termination of the measuring process. Since both analog processing and digital processing are used, the measurement process is over in approximately 96 seconds. This system is being tested in various fields of technology. 1 fig.

Development of a full waveform digital sonic tool and its field application; Full wave onpa kenso sochi no kaihatsu to genchi tekiyo

Energy Technology Data Exchange (ETDEWEB)

Inazaki, T [Geological Survey of Japan, Tsukuba (Japan); Kurahashi, T [Public Works Research Institute, Tsukuba (Japan); Goebuchi, T [OYO Corp., Tokyo (Japan)

1997-10-22

Full waveform digital sonic tool (OYO) has been developed for the purpose of accurately measuring geophysical anomalies in the rockbed containing cracks, and its performance is evaluated by comparing its measurements with those obtained by the conventional sonic logging device (DBM). Modification involves the following. While gain is fixed in the DBM, it is variable in a times10-times200 range in the OYO. Analog transfer:ground surface A/D in the DBM is replaced by digital transfer:intra-probe A/D in the OYO. In the DBM, only a special program running on the MS-DOS can analyze waveform data but, in the OYO, waveforms are recorded in the SEG-Y format enabling the import of the data into generally available waveform processing software. In the OYO, a high-speed communication board is incorporated into the probe, which realizes high-speed communication. There is a very excellent agreement between the two in P-wave velocity distribution as reckoned from the initial run. Regarding the OYO, however, it is pointed out that gain control be performed with the greatest care to prevent waveforms from distortion. 5 figs.

Study on the behavior of reaction disk in the vacuum brake booster; Shinkushiki bairyoku sochi ni okeru reaction disk no kyodo kaiseki jikken

Energy Technology Data Exchange (ETDEWEB)

Kuroda, M; Sawada, T; Kato, Y [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan); Ogawa, E; Nakamura, S [Jidosha Kiki Co. Ltd., Tokyo (Japan)

1997-10-01

Vacuum brake booster has been widely applied in automobiles, and it needs much time for experiments in order to design a new type model and so on. In this report concentrating on the behavior of a reaction disc, it was simulated by ARAQUS FEM program where coefficients of rubber disc are Mooney-Rivlin constants. It was shown that the numerical results represent good agreement with experiments, and in addition that values of jumping force which shows the starting point of the brake increases with the increment of the hardness of the disc, clearance and so on. 2 refs., 10 figs.

Fundamental principles of a new EM tool for in-situ resistivity measurement; Denji yudoho ni yoru den`ichi hiteiko sokutei sochi no kento

Energy Technology Data Exchange (ETDEWEB)

Noguchi, K; Aoki, H [Waseda University, Tokyo (Japan). School of Science and Engineering; Saito, A [Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)

1996-05-01

For the purpose of measuring in-situ resistivity without contact with the rock, a study was made about a measuring device using electromagnetic induction. This measuring device has two concentric transmission loops and a receiving point at the center of the loops, and performs focusing by canceling the primary magnetic field at the receiving point. Using this device, a trial was made to eliminate the influence of surface undulation. In the model calculation, response was calculated after the structure with a heavily undulated ground surface was replaced by a two-layer structure with the first layer provided with a higher resistivity. In the model, the first layer had a resistivity of 10000 Ohm m, and the second layer 1000 Ohm m. Using the ratio between the transmission loop radii as a parameter, relationship with the thickness of the first layer was studied, and it was found that the sensitivity to the second layer resistivity increases when the inner and outer loops are nearer to each other in terms of radius and that this eliminates the influence near the surface layer. A decision needs to fall within a scope assuring good reception because response intensity decreases as the ratio between the transmission loop radii approaches 1. 3 refs., 11 figs.

Scientific Rationale and Algorithmization of Sochi Resort Natural and Preformed Physical Therapeutic Factors in the Course of Combined Treatment of Patients with Chronic Vulvovaginitis

Directory of Open Access Journals (Sweden)

Kirill V. Gordon

2012-11-01

Full Text Available Chronic vulvovaginitis is the most wide-spread gynecological pathology among women of childbearing age. The chief causations of nonspecific vulvovaginitis are reduction in oestrogen, disturbances in vaginal acidity, intestine dysbacteriosis, local and general immune disturbances. The growth of vagina opportunistic pathogenic flora is closely connected with the increase of bacterial slimes on vagina mucus. Sulphur balneotherapy in the form of general baths and vaginal irrigations, mechanical physiotherapy promotes disruption of bacterial slimes, oestrogen elevation, immune reconstruction and vaginal biocenosis, which has positive effect on patients’ fertility level, frequency of obstetrical and perinatal pathologies.

Development of the electromagnetic tomography system. Field test results using existing equipment; EM tomography system no kaihatsu. Kison sochi ni yoru test sokutei kekka

Energy Technology Data Exchange (ETDEWEB)

Kumekawa, Y; Miura, Y; Takasugi, S [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arai, E [Metal Mining Agency of Japan, Tokyo (Japan)

1996-05-01

With the purpose of developing an electromagnetic tomography system, an observation was carried out with existing equipment combined, and the data was analyzed. The measuring equipment consisted of existing borehole vertical magnetic field sensors as the sensor part, MT method receivers as the receiving device, and existing CSMT method transmitters as the transmitting device. The measuring was performed at the Richmond Field Station which was abundant in existing data and which had a comparatively simple resistivity structure. The borehole vertical magnetic field sensors were lowered inside the borehole, and signal sources were arranged at 10m apart on the traverse line in the direction from northeast to southwest with the borehole as the center. The analysis of the data was made with the use of EM1D by three models, namely, 10 ohm{center_dot}m homogeneous earth model, 100 ohm{center_dot}m homogeneous earth model, and horizontal 7 layer model prepared on the basis of electric logging results; and a comparative examination was made against the measured data. As a result, it was demonstrated that the test measurement agreed very well with the model from the electric logging results and that it was the data reflecting a resistivity structure. 8 refs., 6 figs.

On the Problems of Strategic Development of Tourism in the Regions of Russia (Case of the Krasnodar Region and the Resort City of Sochi

Directory of Open Access Journals (Sweden)

Dmitry Evgenievich Sorokin

2017-09-01

Full Text Available The article deals with the problems of strategic development of tourism in the economy of the Russian regions. These problems arise in the period of transition from regulatory functions of the market to the management of long-term development based on the strategic objectives and flagship projects that can achieve these goals in practice. In such a case, the tourism sector of the regional economy is suggested to be considered not within the narrow framework of the tour operator and hotel business activity as it takes place in Russia, but on the much broader scale involving 50 branches of the modern economy as it is increasingly used worldwide. The authors’ hypothesis comes from the fact that in modern conditions, the development and implementation of the strategies of the recreation and tourism industries in the Russian regions can only be effective through the creation and promotion of large diversified knowledge-based competitive regional tourism products at new technological level. The paper clearly demonstrates the group methods of regional strategic planning such as brainstorming and foresight (forecasting and future shaping. The results of the research substantiate not only the need to amend the legislative framework and the current management system of the Russian tourism, to actively elaborate and implement the regional development strategies, to carry out tourism development studies aimed at its commercial success but also the importance of convincing representation of the civilizational advantages of the Russian world and Russian civilization through the tourism.

Fundamental principles of a new EM tool for in-situ resistivity measurement. 2; Denji yudoho ni yoru gen`ichi hiteiko sokutei sochi no kento. 2

Energy Technology Data Exchange (ETDEWEB)

Noguchi, K; Aoki, H [Waseda University, Tokyo (Japan). School of Science and Engineering; Saito, A [Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)

1997-10-22

In-situ resistivity measuring devices are tested for performance in relation to the principle of focusing. After numerical calculation, it is shown that in the absence of focusing the primary magnetic field will prevail and that changes in the separate-mode component will be difficult to detect in actual measurement because the in-phase component assumes a value far larger than the out-of-phase component. Concerning the transmission loop radius, the study reveals that a larger radius will yield a stronger response and that such will remove the influence of near-surface layers. Two types of devices are constructed, one applying the principle of focusing and the other not, and both are activated to measure the response from a saline solution medium. The results are compared and it is found that focusing eliminates the influence of the primary magnetic field and that it enables the measurement of changes in resistivity of the medium which cannot be detected in the absence of focusing. 3 refs., 9 figs.

Easy steel tower elevation. Development of a steel tower elevating aiding device; Tetto shoko wo rakuraku to. Tetto shoko hojo sochi no kaihatsu ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Tobe, Y. [Kansai Electric Power Co. Inc., Osaka (Japan)

1999-02-10

Elevation of a transmission line steel tower is performed by an operator`s own force upon fixing a safety device to prevent a fall on a safety wire (SW) previously installed on a specified tower leg. It is a considerable burden for the operator to move the tower having a height of 80 to 100 m up and down several times a day. In order to reduce the fatigue, a portable, small and light-weight steel tower elevation aiding device was developed. The existing SW is used to fix the device, requiring no additional facility to be fixed on the tower. Safety assurance depends on the safety device on the SW as currently used. The device has pulling force of 50 kgf (the device operates in a range of 4 to 50 kgf to assure workability in elevation and stopping), and elevation speed of 15 to 20 m/minute (equivalent to the present work. The braking force can be adjusted in three steps at descent according to the ability of the operator). An Ni-hydrogen battery is used, capable of two returns on a tower per charge. Considering the device to be transported in mountainous area, the shape is such that a single unit can be put into a backpack. The device can also be used in general construction sites. (NEDO)

PW-6ES gas turbine generator for Maglev linear motor car. Yamanashi rinia jikkensen daiichi hensei sharyo tosaiyo PW-6ES gas tabin hatsuden sochi

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, T [JR Railway Technical Research Inst., Tokyo (Japan); Nakamura, S [Ebara Corp., Tokyo (Japan)

1994-06-10

A power generator is developed to be used as the auxiliary power source for the first carriage at the levitation type railway Yamanashi linear experimental line. The gas turbine generator is installed to supply power to the electric equipment on the carriage, and the power generating conditions are transmitted to the ground commanding room via on-board central control system for centralized controlling. An aircraft diversion type ST6 gas turbine and a high frequency light weight generator are combined for the gas turbine generator developed this time. Single reduction planetary gear is employed for the reduction gear which connects the two units directly, the gas turbine being connected to one side and the generator to the other side with no coupling. The output of the generator is 350kW, AC 455V, and 400Hz, and power is supplied to the electric devices on the carriage after having been converted to DC 600V. Aluminium is used to reduce the weights of the soundproof enclosure and exhaust dust shell plate. 1 fig., 1 tab.

Vertical vibration control system for PC cable-stayed bridge during cantilever construction; Shuketa jogedo seishin sochi ni yoru haridashi sekoji no PC shachokyo no seishin

Energy Technology Data Exchange (ETDEWEB)

Oshio, M.; Nakano, R.; Niihara, Y.; Yano, K.; Takeda, T. [Kajima Corp., Tokyo (Japan)

1995-12-20

A PC cable-stayed bridge under extension construction having long span length may have long-cycle vibration generated because of wind. The vibration puts workers working on main girders into a state of seasick causing the workability to drop. Therefore, with an objective to reduce vibration occurring on the main girders during construction, discussions were given on application of an active type vertical vibration absorbing device. The vibration absorbing device is an active system that a weight is driven vertically by a hydraulic actuator. The device was developed with a target that damping ratio when a maximum extension is 120 m becomes three times that when no vibration is absorbed for a 5-span continuous PC cable-stayed bridge with a length of 675 m, a central span of 260 m, and a width of 11 m. A cage housing the weight is connected with the actuator at its top by using pins, and the weight is supported being suspended from the top of the actuator. Vibration is absorbed by utilizing reactive force generated when the weight is driven vertically by the hydraulic actuator. The hydraulic actuator contains a gas spring that supports the dead weight of the weight. Experiments have verified the effectiveness of the vertical vibration absorbing device. 4 refs., 12 figs., 3 tabs.

Mixture of industrial waste oxidized titanium and reduced slag from electric furnace used as hydraulic material. Denkiro kangen slug to sanka titan kogyo haikibutsu no kongobutsu no suinan zairyo to shiteno riyo

Energy Technology Data Exchange (ETDEWEB)

Honda, A [Osaka City University, Osaka (Japan). Faculty of Engineering; Kuwayama, T [Daido Institute of Technology, Nagoya (Japan); Yamada, M; Ikezaki, H [Osaka City University, Osaka (Japan). Faculty of Engineering

1990-10-29

Slag released from an electric furnace consists mainly of waste steel. There are two types of slag, namely, oxidized slag and reduced slag. Reduced slag, which is generally in the form of powder, is difficult to recycle as compared with oxidized slag. However, with a hydraulicity, some reduced slag is expected to be useful as hydraulic material. Test results obtained here show that the hydraulic properties of reduced slag powder can be improved by mixing it with gypsum and that the resultant mixture can serve to improve the prooperties of soft clay. Another study is made to determine the potential, as hydraulic material, of mixtures of reduced slag powder and waste gypsum material with a high gypsum content released from an oxidized titanium production process. The hydraulicity is found to develop as a result of the formation of a hydrate of calcium aluminate which is contained in the slag. Addition of water to the hydrate and gypsum cause the formation of ettringite, leading to an increased uniaxial compressive strength. These findings indicate that the above-mentioned mixture can be useful to improve the hydraulic properties of coal ash to be disposed of at landfill sites. 5 refs., 5 figs., 1 tab.

Exploration of shallow subsurface resistivity structure using a portable TEM system: TEM-FAST prosystem; Kan`igata TEM ho sochi TEM-FAST prosystem ni yoru senbu hiteiko chosa

Energy Technology Data Exchange (ETDEWEB)

Miura, Y; Kumekawa, Y; Takasugi, S [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan)

1997-05-27

Discussions were given on effectiveness of the TEM-FAST ProSystem which is a portable TEM system developed recently for use in exploration of shallow subsurface resistivity. The system consists of a loop type antenna, the TEM-FAST as the main equipment, and a host computer, the host computer controlling the entire system. The system acquires transient response data in secondary induced magnetic fields lasting 4 {mu} sec to 1 m sec. The number of data is 5490 stacks in one measurement, and the data acquisition time is about three minutes. Measurements were carried out by using the TEM-FAST in the vicinity of a well, whose results were compared with those of electric logging, and discussions were given on them. Although the electric logging results had no data available for depths shallower than 35 m, the measurement results from the TEM-FAST were found highly harmonious with those of the electric logging. In addition, there were transmission and telephone lines in locations about 10 m away from the well during the measurement, but extremely high data quality was discovered. 6 refs., 7 figs., 1 tab.

Risk-oriented approach application at planning and orginizing antiepidemic provision of mass events

Directory of Open Access Journals (Sweden)

D.V. Efremenko

2017-03-01

for Sochi was accomplished taking the completed assessment into account. The positive experience obtained through risk-oriented organization of certain activities aimed at providing anti-epidemic safety of mass international events on the Russian Federation territory allows us to be optimistic about prospects of wider implementation of the approach described above and other similar approaches based on health risk analysis principles.

Study of a wave power generator system using an air turbine having improved J-shaped blades; Kairyo J gatayoku kuki turbine wo mochiita haryoku hatsuden sochi no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Honma, T; Omata, K; Kojima, N [Meiji University, Tokyo (Japan)

1997-11-25

An improved J-shaped blade, in which a J-shaped blade is combined with a small-size Savonius blade, has been developed, to further improve efficiency of an air turbine for wave power generator systems. A prototype model of stationary wave power generator has been developed using the improved blade, to confirm its power generation characteristics by tests in a water tank and small-scale ocean tests. The results are compared with the characteristics of the units with conventional blades. The air turbine unit with the improved blade shows an efficiency of 13 to 35%, which is higher by 10 to 20% than that of the turbine with a J-shaped blade and by 20 to 70% than that of the one with a Savonius blade, more noted at low speed of rotation. It is therefore considered that the turbine with the improved blade is suited for sea areas having a relatively low wave height. It is also considered that efficiency can be further enhanced, when one or more guide vanes are provided around the blade. 2 refs., 12 figs.

Estimation of a subsurface structure by using shallow seismic engineering exploration system with multiple function (SWS); Takino danseiha tansa sochi (SWS) ni yoru senbu chika kozo tansa ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Liu, Y [Beijing Shuidian Research Institute of Geophysical Surveying, Beijing (China); Ling, S [Nihon Nessui Corp., Tokyo (Japan); Okada, H [Hokkaido University, Sapporo (Japan)

1997-10-22

The Beijing Shuidian Research Institute of Geophysical Surveying has performed ocean seismic exploration in the area where the Fujian Pingtan bridge was planned to be constructed. The elastic wave exploration device is of a multi-functional type. The device has functions of acquiring, processing and analyzing data in seismic exploration using the reflection method, and can visualize subsurface conditions at the same time as performing the exploration. The planned bridge building area spans over a sea area of about 3500 m long with water depths from several meters to 30 meters. The foundation bed consists of dacite lithologic tuff and granodiorite. The seal level varies from 4.0 m to 4.8 m between high and low tides. According to the result of other measurements, the elastic wave propagation velocities of the sea water were found from 1475 to 1485 m/s, and the elastic wave propagation velocities at the surface bed of the sea bottom were from 1550 to 1700 m/s. The exploration used a workboat which moves at a constant speed while maintaining the offset between a transmitting source and a receiving source constant, executing vibration transmitting, receiving and recording all on the sea. The result of the exploration revealed that neither obstacles such as sunken ships nor marks of occurrence of ocean bottom landslides were present. 1 ref., 5 figs.

Practical use of dry desulfurization equipment using coal ash and effective use of used desulfurizer. Sekitanbai riyo kanshiki datsuryu sochi no jitsuyoka to shiyozumi datsuryuzai no yukoriyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Suzuki, T.; Ueno, T. (The Hokkaido Electric Power CO. Inc., Hokkaido (Japan))

1992-01-30

Practical use of dry desulfurization equipment using coal ash installed in Atsuma power plant no.1 is explained. Outline of dry desulferization process is consisted of basic principles and structure of the process which includes desulfurizer production equipment and absorption equipment. When compared with conventional wet process, equipments for waste water and for reheating of exhaust gas are not necessary, and operation maintenance has been more convenient with the simplification of the system and absorber has graded up the elimination function. Advantages of simplification of treatment of used desulfurizer, and absorption of sulfurdioxide by desulfurizer together with characteristics of desulfurizer production are given. As far as practical macineries are concerned, outline of instrument facilities, construction technology and results of experimental operation are reported. Effective Use of desulfurizer using deodorant and hedro treatment has been verified from ammonium absorption experiment and practical investigation results. However use of hedro material has required, conformity of surface caking technology, under water caking technology, under water covering technology and effect on under water living environment. 13 figs., 4 tabs.

Research report on the effect of the large-scale industrial technology development system and on how it should be in the future; Ogata kogyo gijutsu kaihatsu seido no seika oyobi kongo no arikata ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-01

A survey was done about projects implemented under the above-named development system inaugurated in fiscal 1966, and studies are made as to how large projects should be in the future. The survey covered the subjects which had been completed by fiscal 1985, that is, the remotely controlled submarine drilling device for oil, seawater desalination and by-product utilization, electric vehicle, technology of comprehensive control of automobiles, pattern information processing system, direct iron making by use of high-temperature reduced gas, manufacture of olefines from heavy oil, aviation jet engine, resources recycling/reuse system, superhigh-performance laser-aided combined manufacturing system, submarine oil production system, and the optics-aided measurement/control system. Answers were heard from corporations concerned. The answers contained some complaints, concerning the shortage of experience on the part of participating corporations, degradation in planning functions, increase in the burden of leading companies, shortage of study or conference about an optimum promotion system, problems in accounting and auditing systems, etc., and suggestions were presented for improvement on large-scale projects. (NEDO)

FY 1999 report on the results of the R and D of the plant use energy utilization rationalization industrial material production technology; 1999 nendo shokubutsu riyo energy shiyo gorika kogyo genryo seisan gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of using plants to the process to produce energy conservation type/environmentally friendly type industrial materials, the R and D were conducted on the improvement in material productivity/stress resistance of plants by transgenetic technology, etc., and the FY 1999 results were summarized. In the study of the creation of plants to produce industrial materials by genetic recombination of eucalyptus trees, it was found out that early maturing branches of eucalyptus trees were a material suitable for Agrobacterium infection, and conditions to efficiently acquire transformation calluses were obtained. In the R and D of the creation of soybeans to produce polyunsaturated fatty acid, a gene of unsaturated enzyme was acquired from Mortierella alpina storing ultra-long chain polyunsaturated fatty acid, and an experimental study was made to study whether or not this gene functions by plant. Further, studies were conducted on the technology to produce hybrid fiber by salt tolerance plants, creation of plants to produce isoprenoid/natural rubber, technology to produce tissue-specific high proteins, study on the molecular breeding of disease resistant plants, etc. (NEDO)

RO unit for canned coffee drink processing line. Shipped to Tone Coca-Cola Bottling Co. Ltd., Ibaraki plant; Coffee line yo RO sochi. Tone Coca-Cola Bottling (kabu) Ibaraki kojo nonyu

Energy Technology Data Exchange (ETDEWEB)

Nakajima, K. [Ebara Corp., Tokyo (Japan)

1996-01-20

The paper introduces an RO unit (reverse osmotic membrane equipment) for producing water holding for the canned coffee drink processing line introduced to the Ibaraki plant of Tone Coca-Cola Bottling Co. The unit aims at reducing hardness components from city water and producing water holding for the coffee drink processing line. The capacity of the unit is 25m{sup 3}/h and the recovery rate is 80%. The unit is composed of a sand filter, an heat exchanger, a pre-filter, RO modules, a treated water tank, chemicals storage tanks, and an RO cleaning unit, which are all for pretreatment. The treated water, into which chlorine is injected, is sent through the existing activated carbon tower and micro filter to the processing line. The RO unit can remove at the same time ion and trihalomethane, pathogens, organic matters which are substances other than hardness components. The continued water bottling is possible with no need for the usual reproduction process, and the maintenance is easy. Because of the high hardness of the supplied raw water, acid is injected at the primary side of the unit for pH regulation to prevent scale deposition in the RO modules. The quality of the treated water well met the specifications. 2 figs., 2 tabs.

R and D project for large industrial technologies in fiscal 1989. Report on achievements in R and D of robots for critical works; 1989 nendo seika hokokusho. Ogata kogyo gijutsu kenkyu kaihatsu jigyo. Kyokugen sagyo robot no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-03-01

Research and development have been performed on basic technologies common to different types of robots to carry out works in critical conditions. This paper summarizes the achievements in fiscal 1989. In the R and D of sensor technologies, a prototype tri-axial one-millimeter sensor array and a signal processing device were produced and evaluations were given. A prototype production and evaluations were made on a system that can recognize comprehensively the slip, hardness, and moment as the tri-axial tactile information. In the R and D of motive force technologies, discussions were given on improvement of sensitivity of the torque sensor in the actuator for force control. Design and prototype fabrication were carried out on a speed reducer integrated actuator having a torque sensor for the manipulator's elbow joint. In addition, a force controlled controller was fabricated on a trial basis, which compensates the non-linearity of the force controlled actuator by means of software control. In the R and D of the robot languages, an application program was prepared on a representative work related to movements of a critical work robot. Verification was also conducted on the reasonability of the grammar specifications. (NEDO)

FY 2000 report on the results of the model project on facilities for the effective utilization of industrial waste from industrial complex. Separate Volume 3; 2000 nendo Kogyo danchi sangyo haikibutsu yuko riyo setsubi model jigyo. Dai 3 Bunsatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the purpose of promoting the effective utilization of industrial waste as petroleum substitution energy resource and reducing the consumption of fossil fuels in Thailand, a model project on facilities for the effective utilization of industrial waste from industrial complex was worked on, and the FY 2000 results were reported. In Separate Volume 3, drawings of the following were included: furnace, free board spray nozzle, dispersion air nozzle, secondary burner, sand make-up conveyor, sand discharge gate, boiler, silencer for boiler safety valve, steam header, steam accumulator, gas cooling tower, refuse drainage storage tank, small sized drainage pump, pressure tank, flue gas duct, air damper, incombustible conveyor 2, sand circulation system bag filter, weighing bridge, fan starter panel, control panel, control panel, local switch box, distributed control system, field instrument, flue gas analyzer. (NEDO)

R and D project for large industrial technologies in fiscal 1990. Report on achievements in R and D of robots for critical works; 1990 nendo seika hokokusho. Ogata kogyo gijutsu kenkyu kaihatsu jigyo. Kyokugen sagyo robot no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-01-01

Research and development have been performed on basic technologies common to different types of robots to carry out works in critical conditions. This paper summarizes the achievements in fiscal 1990. In the R and D of tactile sensors, a prototype multi-element sensor array applicable to fingers of a robot hand was produced, and the characteristics test was conducted. In the R and D of motive force technologies, a force controlled actuator for wrist containing a torque sensor was designed and produced on a trial basis, whereas evaluations were given on the size and weight reduction and the force control performance. Regarding the actuator with redundant degree of freedom, a force controlled arm was attached with an actuator with three degrees of freedom to have performed an evaluation experiment. With regard to a small size and light weight controller, fabrication was carried out on a multi-function, high-density controller which adds positional control and peripheral interface functions to the force controlling function, and an evaluation was given. In the R and D of robot language, discussions were given on robot languages related to each system of movement, manipulation, and sensors, and the grammar specifications were prepared. (NEDO)

Surface temperature measurement using infrared radiometer. 2nd Report. Applicability of pseudo gray body approximation. Sekitaisen eizo sochi wo riyoshita jitsuyoteki ondo keisoku ni kansuru kenkyu. 2. Giji Haiiro kinji no tekiyosei

Energy Technology Data Exchange (ETDEWEB)

Inagaki, T; Sekiya, M; Ishibashi, H; Okamoto, Y [Ibaraki University, Ibaraki (Japan). Faculty of Engineering; Kurokawa, K [NEC Corp., Tokyo (Japan)

1994-06-25

Establishment of a simple and reasonable technique and its application to the metallic surface in addition to the nonmetallic surface in the room-temperature measurement using infrared picture equipment have been studied. It was found, as published in the previous paper, in the investigation of radiation temperature, radiosity coefficient, their wave-length dependence and the dispersiveness of these parameters about the surfaces of various kinds of material that the assumption of gray body approximation does not hold in the surfaces of metal and part of nonmetal. In the present work, applicability of pseudo-gray body approximation to the metal surface in a system surrounded by black body surfaces was studied in consideration of directivity of emissivity and reflectance while, in actual, a measuring angle of 15 degrees giving a small directivity effect was used based on experimental results. As in the previous paper, three kinds of sensors different in the detectable wave-length range were used to evaluate the radiation temperature, emissivity, radiosity coefficient, and their dispersiveness. The experimental results proved the applicability of pseudo-gray body approximation. 3 refs., 18 figs., 2 tabs.

Present situation, current problems and countermeasures to solve them by the material technology group in chemical companies; Kagaku shakai ni okeru sochi zairyo gijutsu no genjo to kadai oyobi sore eno taio

Energy Technology Data Exchange (ETDEWEB)

Nakahara, Masao. [Asahi Chemical Industry Corp., Tokyo (Japan). Production Technology Center

1999-05-15

A questionnaire investigation about the present situation, current problems and countermeasure to be discussed with by material technology groups in the eight chemical companies was carried out. It has become clear from the analysis of answers obtained that the roll of material group has been changing under the diminishing construction of new plant and the increased needs of stable and sustainable plant operation. The present major subjects of material groups, which are pointed out in the answers, are such new technological problems as the plant life estimation, the dissemination and handing down of material technology and the upbringing of technology successors. The countermeasures to meet those requirements made clear are such technology developments as a new monitoring system, preparation of database on material technology and closer cooperation with relatied associations. It is hoped for that the findings of this study would lead to further and more detailed indentification of common problems to be solved and development of practical countermeasures therefor. (author)

Research report for fiscal 1998. Comprehensive research cooperation on environmental technologies (study of air pollution monitoring at model industrial estate in Thailand); 1998 nendo chosa hokokusho. Kankyo gijutsu sogo kenkyu kyoryoku (Taikoku model kogyo danchi taiki osen monitoring ni kansuru kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Cooperative studies are conducted for the improvement of technologies for preventing air pollution caused by SOx, NOx, volatile organic compounds, etc., discharged into the air by mills and factories. For the measurement of air pollution, instruments capable of automatic and uninterrupted measurement of SOx, NOx, and suspended particle matters are installed at Map Ta Phut Industrial Estate, and measurement is carried out. Volatile organic compounds are measured and analyzed along the borderline enclosing the estate. The amounts of SOx and NOx emitted by automobiles, ships, etc., are calculated. An air pollutant diffusion simulating model is built, into which data about pollution sources and weather are inputted for the calculation of SOx and NOx concentration levels at the industrial estate as is. Technologies are transferred to Thai researchers and engineers, which involve the use of instruments for the measurement of pollution levels in the environment and for the observation of weather conditions, the techniques of sampling and analysis, the construction of atmosphere simulating models, and the analysis and evaluation of the existing air pollution. (NEDO)

Development of free running differential. Development of differential with an actuator and a clutch which disconnects the traction; Free running defu no kaihatsu. Kirippanashi kiko oyobi actuator wo naizoshita differential sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Yamazaki, N; Teraoka, M; Ishikawa, O; Nagaoka, T; Ugajin, K [Tochigi Fuji Sangyo Co. Ltd., Tochigi (Japan)

1997-10-01

Free Running Differential has an effect on fuel economy and noise reduction from drive line for four wheel drive vehicle. It has an actuator and a clutch which disconnects the traction from no driving side tire when two wheel drive is selected. this unit can be installed in conventional differential carrier with no design change. It is compact in design and low in cost. We evaluate it as having a dominant position among any other Free running system. 7 figs.

Surface temperature measurement using infrared radiometer. 1st Report. ; Radiosity coefficient and radiation temperature. Sekigaisen eizo sochi wo riyoshita jitsuyoteki ondo keisoku ni kansuru kenkyu. 1. ; Shado keisu to hosha ondo no kankei

Energy Technology Data Exchange (ETDEWEB)

Okamoto, Y; Inagaki, T; Sekiya, M [Ibaraki University, Ibaraki (Japan). Faculty of Engineering

1993-12-25

As a part of the studies on practical surface temperature measurement by infrared radiometer, some basic characteristics of an infrared radiometer were studied by using three kinds of sensors with different detectable wave lengths. Specimens allowable for gray body approximation such as mortar, graphite and carbon fiber composite material were tested at a practical ambient temperature of 293 K. As a result, the difference between a radiation temperature in consideration of reflection and that derived from an emissivity increased with a decrease in emissivity, and the deviation of an emissivity derived from a radiosity coefficient increased at 20 K or less in difference between a specimen surface temperature and ambient one. Each radiosity coefficient measured by each sensor also fairly agreed with each other. The deviation of a radiosity coefficient was relatively small indicating a good agreement between theoretical and experimental data, while the difference between emissivity and radiosity coefficient deviations decreased with an increase in specimen surface temperature. 3 refs., 10 figs., 1 tab.

Development of the spectrometric imaging apparatus of laser induced fluorescence from plants and estimation of chlorophyll contents of rice leaves; Laser reiki keiko sokutei sochi no kaihatsu to inehanai no chlorophyll ganryo no suitei

Energy Technology Data Exchange (ETDEWEB)

Nakaya, K.; Shoji, K.; Hanyu, H.

1999-05-01

Photosynthetic activity of plants is an important factor to assess the micrometeorological effect of plant canopy or to estimate the influence of circumstances such as water stress. Light illumination induces fluorescence from a leaf or suspension of chloroplasts. The red chlorophyll fluorescence had been used to determine the process of the electron transportation in photosynthetic reaction. The fluorescence source other than chlorophyll is not announced sufficiently, but is supposed to be useful to determine the contents of the substance corresponding to physiological response of plants. We developed a fluorescence imaging apparatus to observe spectrum and distribution of laser induced fluorescence from a leaf. Pulsed UV-laser (Nd:YAG) induced blue-green fluorescence and red chlorophyll fluorescence from a green leaf. The pulse modulated measuring light and CCD with image-intensifier (ICCD) enable to detect the fluorescence from plants under illumination. The laser induced fluorescence (LIF) spectra were investigated to estimate the chlorophyll contents in leaves of rice. During the greening course of dark grown etiolated rice leaves, chlorophyll contents were determined using the extraction of leaves and steady state LIF spectra were measured. As a result, the ratio of fluorescent intensity between blue-green and red peaks (F460/F740 and F510/F740) decreased in proportion to alteration of chlorophyll contents respectively. These fluorescence intensity ratios perform more precise estimation of higher chlorophyll contents of leaves than reported red chlorophyll fluorescence intensity ratio (F690/E740). (author)

THE EVOLUTION OF THE WINTER PARALYMPIC GAMES AND SPORTS

Directory of Open Access Journals (Sweden)

Vasilios Giovanis

2015-03-01

Full Text Available Purpose: The aim of this research was to record and the evolution of the winter paralympic games and sports since 1976 until 2010. The history of the Winter Paralympic Games is relatively recent compared to that one of the Olympic Games. The first Games were held in 1976 in Ornskoldsvik, Sweden and the most recent, 38 years later in 2014, in Sochi, Russia. This article will examine the Winter Paralympic Games up until the ones in 2010 in Vancouver, Canada. During these years, there have been many changes in relation to the Games itself, the governing body of the Paralympic Movement, the sports’ facilities, the sports involved and sports’ categories. The motivation for writing this paper was the need to record and gather all of these items in one paper. Gathering information for the Winter Paralympic Games will be an important theoretical background. This information will create a database for the structure of the governing body of the Paralympic Games, for the organization of the Games [Local Organizing Committee (LOC, venues and equipment], for the evolution of the Winter Paralympic Sports and the categories of the athletes, as well as the evolution of the athletes’ and sports’ participation. Material : The research material that was used was mainly from the bibliography and records of the International Paralympic Committee (IPC, from the Official Post Games Reports and the Internet, while the research method that was used was descriptive. Moreover, the use of diagrams will depict the distribution of the participation of athletes and countries in each Games. Results : The participation of countries grew continuously and steadily from 16 to 44, during the years of 1976 to 2010 respectively. Regarding the athletes’ participation, starting in the first Games with 198 athletes, they reached the number of 502 in the 2010 Vancouver Winter Paralympic Games. The participation percentages of the athletes coming from Europe constituted the bulk

On the Perception of National Security Issues at Regional Level

Directory of Open Access Journals (Sweden)

Ponedelkov Aleksandr Vasilyevich

2015-12-01

Full Text Available The article explores the issue on the perception of the concept “national security” areas, models and methods of its maintenance by the population. The author uses materials of the sociological survey conducted by the Laboratory of problems of increasing the efficiency of state and municipal management of the South-Russian Institute of Management – branch of the Russian Presidential Academy of National Economy and Public Administration. The survey was carried out with the participation of leading experts in various aspects of national security, representing 27 Russian higher educational institutions and research centers in Moscow, Astrakhan, Barnaul, Belgorod, Dushanbe, Krasnodar, Nizhny Novgorod, Omsk, Pyatigorsk, Rostov-on-Don, Saint Petersburg, Syktyvkar, Sochi, Ufa. It is noted that as a priority political governance model that implements the basic concept of national security, respondents identified a democratic model. Most respondents believe that a unified security model in the Russian regions is ineffective, and such model should be developed taking into account the specificity of each subject. The study showed that the public’s attention to the issue of national security is not sustainable, as determined by situational factors. It is proved that the motives of anxiety formed in the Russian public mind are not sustainable, and situational. Respondents see the economic cooperation more effective incentive to maintain national interests than by force. Estimation of the population of the priority issues of security shows that most respondents appreciate the organization of work to ensure the safety and anti-terrorism security in the sphere of national relations. The findings give grounds to assert that the focus of public attention to the problem of national security does not yet occupy the leading positions. To a greater extent, respondents focused on the issues of public safety, reducing threats and risks in their daily lives

Stability analysis and it prime s application of a guided vehicle with target tracker model uncertainties. Mokuhyo tsuibi sochi no model fukakuteisei wo koryo ni ireta hishotai yudo seigyokei no antei kaiseki to sono oyo

Energy Technology Data Exchange (ETDEWEB)

Eguchi, H; Tanaka, T [Defence Agency, Tokyo (Japan); Yamashita, T [Kyushu Inst. of Technology, Fukuoka (Japan)

1990-08-05

The stability of a missile guidance system was analyzed with the Popov {prime} s hyperstability theory, considering target tracker model uncertainties. After the basic block diagram was derived as a mathematical model of the guidance system, the stability of the guidance system was analyzed as a nonlinear time-variable system, based on the Popov {prime} s hyperstability theory. Based on the results, several requirements of target tracker model uncertainties, and dynamic properties such as a natural frequency and damping characteristics of missiles, were derived for the hyperstability of the guidance system. In addition, after the hyperstable minimum range of missiles was defined, the relation was given by the use of an example between target tracker model uncertainties and the hyperstable minimum range or miss distance. As a result, the analysis allowed to derive design requirements such as dynamic properties for robust guidance systems. 12 refs., 11 figs., 2 tabs.

Strain measurement of wheel by a super-small size strain history recorder and its application to fatigue design; Chokogata jitsudo hizumi keisoku sochi ni yoru wheel no hizumi keisoku to hiro kyodo sekkei eno oyo

Energy Technology Data Exchange (ETDEWEB)

Murakami, Y [Kyushu University, Fukuoka (Japan); Mineki, K; Wakamatsu, K [Central Motor Wheel, Tokyo (Japan); Morita, T

1997-10-01

A very small strain history recorder based on the rainflow method has been developed and applied to strain measurement of car wheels under several road tests. Various strain amplitude histogram data under mountain road, city road and high-way were acquired by the recorder for various types of wheels. The data were studied from the viewpoint of random fatigue and the fatigue damages were evaluated by Miner`s rule. The results of the damage evaluation were used for the improvement of shapes of wheels. 2 refs., 6 figs., 1 tab.

Fiscal 1999 international energy conservation model project. Report on result of demonstrative research concerning cement clinker cooling system; 1999 nendo kokusai energy shohi koritsuka nado model jigyo seika hokokusho. Cement clinker reikyaku sochi ni kakawaru jissho kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of reducing energy consumption and CO2 discharge in a cement plant in Indonesia, R and D was conducted on new clinker cooling system, high performance kiln combustion system, and technology for steady kiln operation and control, with the fiscal 1999 results reported. In the research on the optimum clinker cooling system, a new type clinker cooling system (CCS) was developed in which air beams are applied only to stationary grate rows, in an air beam type clinker cooling system where cooling air is fed to each block, with grate plates used as the air duct. This year, in an actual machine testing equipment (capacity 2,500 t/d), the whole heat recuperation area was modified for the CCS, with the operation started since February, 1999, aiming at the optimal clinker cooling effect and high heat recovery efficiency. The heat quantity for the entire system showed a decrease of 60 kcal/kg in the heat consumption rate through CCS modification, kiln burner adjustment, etc. So long as the demonstration plant is concerned, design of a new type burner and study/design for the kiln stabilization were nearly completed. (NEDO)

Modeling of Nonlinear Hydrodynamics of the Coastal Areas of the Black Sea by the Chain of the Proprietary and Open Source Models

Science.gov (United States)

Kantardgi, Igor; Zheleznyak, Mark; Demchenko, Raisa; Dykyi, Pavlo; Kivva, Sergei; Kolomiets, Pavlo; Sorokin, Maxim

2014-05-01

-SED - the module of the simulation of the sediment transport in which the suspended sediments are simulated on the basis of the solution of 2-D advection -diffusion equation and the bottom sediment transport calculations are provided the basis of a library of the most popular semi-empirical formulas. MORPH - the module of the simulation of the morphological transformation of coastal zone based on the mass balance equation, on the basis of the sediment fluxes, calculated in the SED module. MORPH management submodel is responsible for the execution of the model chain "waves- current- sediments - morphodynamics- waves". The open source model SWASH has been used to simulate nonlinear resonance phenomena in coastal waters. The model chain was applied to simulate the potential impact of the designed shore protection structures at the Sochi Olympic Park on coastal morphodynamics, the wave parameters and nonlinear oscillations in the new ports designed in Gelenddjik and Taman at North-East coast of the Black Sea. The modeling results are compared with the results of the physical modeling in the hydraulic flumes of Moscow University of Civil Engineering.

Achievement report in fiscal 1999 on commissioned research project. 'Model project for facilities to effectively utilize wastes from industrial complexes in Thailand' Project for 1999 Volume 1; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 1

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to reuse industrial wastes and effectively utilize them as a petroleum replacing energy resource, and attempt to reduce consumption of fossil fuel in Thailand where increase in discharge of industrial wastes is estimated, a model project for facilities to effectively utilize wastes from industrial complexes has been carried out. This paper reports the achievements in fiscal 1999. Specifically, the project calls for incineration in fluidized bed incinerators of industrial wastes discharged from factories in industrial complexes possessed by the Industrial Estate Authority of Thailand (IEAT), recovery of waste heat from waste heat recovering boilers to generate process steam, which is supplied to the factories in the complexes. The current fiscal year, which is the first current year of the project, has put into order the operations shared by Japan and Thailand, compiled the various procedures and schedules into the form of appendices to the agreement, and executed signing of the agreement. Thereafter, the Japanese side has carried out decision on the specifications of the facilities, the basic designs, the detailed designs of facilities to be arranged by Japan, and the fabrication of some of the devices according to the descriptions of the agreement appendices. The volume 1 summarizes the agreement appendices, and the specifications of the main devices. (NEDO)

Achievement report in fiscal 1999 on commissioned research project. 'Model project for facilities to effectively utilize wastes from industrial complexes in Thailand' Project for 1999 Volume 3; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 3

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to reuse industrial wastes and effectively utilize them as a petroleum replacing energy resource, and attempt to reduce consumption of fossil fuel in Thailand where increase in discharge of industrial wastes is estimated, a model project for facilities to effectively utilize wastes from industrial complexes has been carried out. This paper reports the achievements in fiscal 1999. Specifically, the project calls for incineration in fluidized bed incinerators of industrial wastes discharged from factories in industrial complexes possessed by the Industrial Estate Authority of Thailand (IEAT), recovery of waste heat from waste heat recovering boilers to generate process steam, which is supplied to the factories in the complexes. The current fiscal year, which is the first current year of the project, has put into order the operations shared by Japan and Thailand, compiled the various procedures and schedules into the form of appendices to the agreement, and executed signing of the agreement. Thereafter, the Japanese side has carried out decision on the specifications of the facilities, the basic designs, the detailed designs of facilities to be arranged by Japan, and the fabrication of some of the devices according to the descriptions of the agreement appendices. The volume 3 summarizes the inspection reports other than those included in the Volume 2. (NEDO)

Achievement report in fiscal 1999 on commissioned research project. 'Model project for facilities to effectively utilize wastes from industrial complexes in Thailand' Project for 1999 Volume 2; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 2

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to reuse industrial wastes and effectively utilize them as a petroleum replacing energy resource, and attempt to reduce consumption of fossil fuel in Thailand where increase in discharge of industrial wastes is estimated, a model project for facilities to effectively utilize wastes from industrial complexes has been carried out. This paper reports the achievements in fiscal 1999. Specifically, the project calls for incineration in fluidized bed incinerators of industrial wastes discharged from factories in industrial complexes possessed by the Industrial Estate Authority of Thailand (IEAT), recovery of waste heat from waste heat recovering boilers to generate process steam, which is supplied to the factories in the complexes. The current fiscal year, which is the first current year of the project, has put into order the operations shared by Japan and Thailand, compiled the various procedures and schedules into the form of appendices to the agreement, and executed signing of the agreement. Thereafter, the Japanese side has carried out decision on the specifications of the facilities, the basic designs, the detailed designs of facilities to be arranged by Japan, and the fabrication of some of the devices according to the descriptions of the agreement appendices. The volume 2 summarizes the inspection reports in the referential materials. (NEDO)

Studies on the hydroprocessing of deashed oil. 10. ; Comparison of the reaction performance between pilot plant and BSU. Deashed oil no suisoka bunkai hanno ni kansuru kenkyu. 10. ; Pilot to bench hanno sochi no hanno tokusei no hikaku

Energy Technology Data Exchange (ETDEWEB)

Hijiriyama, M.; Kaneko, T. (Mitsubishi Kasei Co., Tokyo (Japan)); Kageyama, Y. (Nippon Brown Coal Liquefaction Co. Ltd., Tokyo (Japan))

1990-11-29

The secondary hydroprocessing process in the two-stage hydrogenating liquefaction equipment under development at Nippon Brown Coal Liquefaction Company uses a fixed bed system. This paper describes operation of a bench reaction equipment using catalyst used in the pilot plant to compare it with fresh catalyst, and compare characteristics of the bench scale equipment with those of the pilot reactor. The catalyst is Ca-Ni-No/Al2O. The reaction was carried out in a gas-liquid downward parallel-flow fixed-bed reactor using deashed oil (DAO) with the same material as that used in the pilot plant and the same equilibrium solvent. The experiment result indicates that the used catalyst had its activity fallen below the fresh catalyst, but its temperature dependence was identical, and the selectivity on products of both catalysts was also identical. The result of reactions in the bench scale equipment clarified that the relationship between the DAO conversion rate and denitrogenation activity and the relationship between fa and H/C in the products are in good agreement, and that there is no difference in reaction selectivity. 5 refs., 6 figs., 1 tab.

Feasibility study of environmentally friendly type coal utilization systems. Feasibility study of environmentally friendly type coal utilization systems in sectors except the coal industry in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sekitan kogyo igai no bumon ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

For the purpose of working out a comprehensive master plan for application of the coal utilization system, the paper surveyed and studied the coal utilization system in terms of environmental measures and efficiency improvement in the utilization of coal. As a result of the discussion with NEDO and the National Planning Committee of China, Liaoning Province (the whole China) and Shenyang City were selected as a model area and a model city for the survey and study. As energy conservation measures taken in the former, desirable are intensifying/capacity-increase of boilers, kilns, etc. and adoption of new-type/high-efficient equipment. Also expected are reinforcement of combustion control and improvement of efficiency by using coal preparation, industrial use coal briquette, etc. Measures taken in the latter are the same as those taken in the whole China. As SOx reduction measures for Liaoning Province, desirable is installation of dry-type desulfurization equipment and simple desulfurization equipment. As dust prevention measures for it, desirable is installation of electrostatic precipitators or high-functional bag filters. SOx reduction measures for Shenyang City are the same as those taken in the whole China. SOx can be reduced by using coal-prepared low-sulfur coal and industrial use coal briquette added with desulfurizing agent. 88 figs., 163 tabs.

Model project for enhancing energy consumption efficiency in developing countries. Report on changes of energy conservation technology and environmental protection technology in the chemical industry of Japan; Hatten tojokoku energy shohi koritsuka model jigyo. Nippon kagaku kogyo ni okeru sho energy gijutsu to kankyo taisaku gijutsu no hensen hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of contributing to the economic growth and the global environmental protection in the Asian area, an investigation was carried out into energy conservation technology and environmental protection technology in the chemical industry of Japan. Measures for energy conservation are shifting from those which do not cost so much such as reduction in excess air rate of the heating furnace, and reduction in reflux ratio of the distillation tower to those with equipment investment such as waste heat recovery of the heating furnace and waste heat recovery of the distillation tower. In the 1980s, the utilization of low temperature waste heat by absorption type refrigerator and heat pump was promoted and the energy utilization efficiency by computer control was enhanced. Concerning environmental measures, the following were carried out: installation of the flue gas desulfurization device and reconstruction of high-rise stack, reduction of NOx by combustion control, smoke/dust disposal of electrostatic precipitator, combustion of hydrocarbon causing photochemical oxidant, catalytic oxidation, condensation, treatment by activated carbon, activated sludge treatment for BOD/COD, diaphragm process for dimethylmercury, ion exchange resin process, etc. 21 refs., 29 figs., 27 tabs.

Research and development of peripheral technology for photovoltaic power systems. Development of inverter technology for photovoltaic (PV) system which is connected to the utility grid; Shuhen gijutsu no kenkyu kaihatsu. Fukusu kino tan`itsuka shuhen sochi no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on development of integrated multifunctional peripheral equipment in fiscal 1994. (1) On development of inverters with no transformer, the following study results were obtained. Converter efficiency reached the target of 95.0% by using an improved general purpose IGBT as switching element of main circuit. Distortion factor of output current harmonics achieved 5% in total current distortion factor, and less than 3% in each order harmonic current one. In control of the DC part of output current, the target less than 0.3% was achieved by inserting a capacitor into detection signal circuit and by detection/correction control of current detector offset. Detection level of 100mA was achieved for DC grounding detection by installing a DC grounding detector in the DC input side of inverters. VCCI 1 level was also achieved for EMI measurement. (2) On development of integrated multifunctional peripheral equipment, evaluation test of the prototype equipment of 0.025m{sup 3} in volume and 17kg in mass was carried out. 3 figs., 1 tab.

Numerical simulation of a meteorological regime of Pontic region

Science.gov (United States)

Toropov, P.; Silvestrova, K.

2012-04-01

The Black Sea Coast of Caucasus is one of priority in sense of meteorological researches. It is caused both strategic and economic importance of coast, and current development of an infrastructure for the winter Olympic Games «Sochi-2014». During the winter period at the Black Sea Coast of Caucasus often there are the synoptic conditions leading to occurrence of the dangerous phenomena of weather: «northeast», ice-storms, strong rains, etc. The Department of Meteorology (Moscow State University) throughout 8 years spends regular measurements on the basis of Southern Department of Institute of Oenology of the Russian Academy of Sciences in July and February. They include automatically measurements with the time resolution of 5 minutes in three points characterizing landscape or region (coast, steppe plain, top of the Markothsky ridge), measurements of flux of solar radiation, measurements an atmospheric precipitation in 8 points, which remoteness from each other - 2-3 km. The saved up material has allowed to reveal some features of a meteorological mode of coast. But an overall objective of measurements - an estimation of quality of the numerical forecast by means of «meso scale» models (for example - model WRF). The first of numerical experiments by WRF model were leaded in 2007 year and were devoted reproduction of a meteorological mode of the Black Sea coast. The second phase of experiments has been directed on reproduction the storm phenomena (Novorossiysk nord-ost). For estimation of the modeling data was choused area witch limited by coordinates 44,1 - 44,75 (latitude) and 37,6 - 39 (longitude). Estimations are spent for the basic meteorological parameters - for pressure, temperature, speed of a wind. As earlier it was marked, 8 meteorological stations are located in this territory. Their values are accepted for the standard. Errors are calculated for February 2005, 2006, 2008, 2011 years, because in these periods was marked a strong winds. As the

Flood risk on the Black sea coast of Russia

Science.gov (United States)

Alekseevsky, Nikolay; Magritsky, Dmitry; Koltermann, Peter; Krylenko, Inna; Umina, Natalya; Aybulatov, Denis; Efremova, Natalya; Lebedeva, Seraphima

2013-04-01

coast is very high. It is proved by recent events in 1991, 2002, 2010 and 2012. Possibly, it will increase in the future, as well as number of high and destructive floods. This tendency is caused by strengthening of climatic and synoptic instability in the region and by the human activity in the watersheds and floodplains development (for example huge constructions for the Olympic Winter Games 2014 near Sochi). But this tendency statistically isn't significant yet. Decrease of flood risks will be promoted by optimization of system of hydrometeorological monitoring; detailed studying of factors and characteristics of the floods, including flood dynamic modeling and hazard zonation; development of effective methods of the forecast and the prevention of floods; increasing in channel capacity; population resettlement from especially dangerous areas. The scientific basis for these measures is created by authors within large-scale researches on a grant of the Government of the Russian Federation No. 11.G34.31.0007.

Landslide hazard assessment of the Black sea coastline (Caucasus, Russia) via drones

Science.gov (United States)

Kazeev, Andrey; Postoev, German; Fedotova, Ksenia

2017-04-01

Landslide hazard assessment of slopes of Sochi was performed along the railway between the cities Tuapse and Adler (total length 103 km). The railway passes through the territory with active development of hazardous geological processes such as landslides, rock falls and debris-flows. By the beginning of 2016, 36 landslide sites were discovered along the railway (total length 34 km), 48 rock-fall sites (length 31 km), and 5 debris-flow sites (length 0.14 km). In recent years the intensification of deformations was observed. For instance, during previous 10 years (1996¬¬-2005) 28 sudden deformations occurred due to slope processes, which caused interruptions in traffic. And in the present decade (2006-2015), 72 deformations were recorded. High landslide activity and economic loss determined the necessity of complex investigations of engineering geological conditions of landslides development and causes of its intensification. The protection strategy development was needed to minimize negative consequences. Thus, the investigations of landslide situation along the railway "Tuapse - Adler" included the categorization of landslide sites by level of hazard, with risk assessment based on numerical criteria. Preliminary evaluation of landslide hazard for the railway was conducted via the analysis of archived engineering-geological documents. 13 of 36 landslide sites (total length 13 km) were selected, reflecting the variety and peculiarities of landslide displacements on slopes (both active and inactive sites). Visual field observations of landslide slopes using drone "DJI Phantom 4" were completed during the second stage of this investigation. High-resolution photographs of landslide cirques, cracks, scarp walls, vegetation features were obtained via drone, which would have been impossible to obtain from the ground in conditions of dense subtropical vegetation cover. Possible approaches to the landslide activity and hazard assessment were evaluated: slope stability

National research and development project. Report on evaluation of research and development of remotely controlled excavators for highly deep submarine oil fields; Ogata kenkyu kaihatsu project. Daishindo enkaku sosa kaitei sekiyu kussaku sochi no kenkyu kaihatsu ni kakawaru hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-02-04

Described herein are results of evaluation of the developed excavators remotely controlled for highly deep submarine oil fields. The excavator system was designed to work at the target water depth of 200 to 250 m and excavation depth of 8,000 to 9,000 m, though not quite satisfactorily. There were several practical problems to be solved, e.g., those found in accuracy of reentry in the excavated section, cables connecting the driving equipment to the excavated section, and entangled hoses. The works were divided and system was configured in an attempt to secure all-weather type serviceability and to improve economic viability. The other major works included attempts to improve equipment functions and reduce manpower cost. Nevertheless, however, the construction cost was considered to be higher than expected, and no firm prospect was obtained whether the new excavator system was economically competitive with the conventional rig. The factors that pushed up the construction cost were various facilities needed by the new system with the separated excavation and driving sections, e.g., those facilities for helping the system land on the sea bottoms, material supply/storage facilities, and automated/unmanned facilities. The system failure and other items related to reliability are no clearly understood, making it difficult to compare it with the conventional rig in service factor. It was not adequate, therefore, to advance the next R and D phase as planned, and decided that the project was suspended to see the world development trends, because the clear plans for the future could not be drawn at that time. (NEDO)

Fiscal 1999 achievement report on the venture business assisting type regional consortium - Minor business creation base type. Development of sodium hypochlorite activating system; 1999 nendo venture kigyo shiengata chiiki consortium kenkyu kaihatsu seika hokokusho. Jiaensosan natrium kasseika sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The aim is to develop and widely diffuse a cleaning, sterilizing, and disinfecting system (chemicals and device) which is nearer to the best. A safety-conscious diluting/mixing technology was developed by which acid and sodium hypochlorite were mixed without generating any noxious gas. Using this technology, a mixing tube was developed, capable of homogeneously diluting chemicals in raw water and mixing them homogeneously. How the dilution and mixing occurred in the mixing tube was measured by an electric conductivity meter for evaluation, data on the state of diluting of the solution were plotted in a graphic chart for study, a comprehensive deliberation was made of performance, cost, etc., and then a device was experimentally constructed. A concentration level detecting sensor section and a metering pump were developed. The pH adjustment and disinfecting effect were assessed using various acids, and then it was found that the acetic acid was the most suitable in view of safeness, disinfecting effect, stability, and ease of adjustment. Based on the result of a comprehensive technical survey, a system was designed suitable for artificial dialysis, food processing, and cleaning and disinfecting of endoscopes. A prototype was built, and the development effort progressed to reach a level where a prototype was built and subjected to a field test. (NEDO)

Achievement report on research and development of medical and welfare equipment technology. Unit {sup 13}C-MRS for noninvasive measurement of brain metabolism; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Mushinshuteki no taisha keisokuyo {sup 1}3C-MRS sochi

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

The effort is to develop technologies of conducting highly sensitive, uninterrupted observation of metabolism in the brain by use of the {sup 13}C-MRS unit, for which some carbon chain compounds (glucose, amino acids, etc.), which assume an important part in metabolism, are labelled by a stable isotope {sup 13}C and then administered to living things. A multi-slice HSQC (heteronuclear single quantum coherence) method is developed for the achievement of sensitivity enhanced 16 folds, excellent compound isolating capability, and high localizing capability, and these contribute to the specification of an optimum pulse sequence. A double tuning coil is developed for transmission, and a 6-channel multi-surface coil for reception, these two providing a 3-fold increase in detection probe sensitivity. The nonlinear least-square method is applied for the processing of spectral data, which enables excellent isolation of compounds. It also enables the generation of an inclined magnetic field quick to rise and of a sequence high in amplitude/phase accuracy. New methods are developed for the synthesis of {sup 13}C-labelled glucose, dopa, glutamine, glutamic acid, and GABA (gamma-aminobutyric acid) which are expected to be useful in brain metabolism measurement, and the products are administered to animals for evaluation. (NEDO)

FY 1999 report on the results of the contract project 'The model project for facilities for effective utilization of industrial waste at the industrial complex in Thailand.' Separate Volume 4 - FY 1999 project; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 4

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of reducing the consumption of fossil fuel by recycling industrial waste for effective use as petroleum substituting energy in Thailand where the amount of industrial waste is expected to increase, a model project on facilities for effective use of industrial waste at the industrial complex was carried out, and the FY 1999 results were reported. Concretely, the industrial waste generated from each plant at the industrial complex owned by IEAT is to be incinerated in fluidized bed incinerator, and the process steam is to be generated by recovering waste heat by waste heat recovery boiler and to be supplied to plants within the complex. In this fiscal year, the first year of the project, the attachment to the agreement was prepared in terms of the allotment of the project work between Japan and Thailand, various kinds of gist, schedules, etc. and signed. After that, the following were conducted at the Japan side according to the attachment to the agreement: determination of the basic specifications for facilities, basic design, detailed design, manufacture of a part of the equipment, etc. Separate Volume 4 included the results of the inspection of the tank, pump, blower, etc. (NEDO)

FY 1999 report on the results of the contract project 'The model project for facilities for effective utilization of industrial waste at the industrial complex in Thailand.' Separate Volume 6 - FY 1999 project; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 6

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of reducing the consumption of fossil fuel by recycling industrial waste for effective use as petroleum substituting energy in Thailand where the amount of industrial waste is expected to increase, a model project on facilities for effective use of industrial waste at the industrial complex was carried out, and the FY 1999 results were reported. Concretely, the industrial waste generated from each plant at the industrial complex owned by IEAT is to be incinerated in fluidized bed incinerator, and the process steam is to be generated by recovering waste heat by waste heat recovery boiler and to be supplied to plants within the complex. In this fiscal year, the first year of the project, the attachment to the agreement was prepared in terms of the allotment of the project work between Japan and Thailand, various kinds of gist, schedules, etc. and signed. After that, the following were conducted at the Japan side according to the attachment to the agreement: determination of the basic specifications for facilities, basic design, detailed design, manufacture of a part of the equipment, etc. Separate Volume 6 included drawings of assembling of the equipment such as crane, crusher and valve. (NEDO)

Ministry of International Trade and Industry applying business stimulation taxation system. ; On mechatronics, product shipping facilities and automatic fire extinguishing facilities used by large corporations. Keiki taisaku ni tsusansho mo zeisei sochi. ; Daikigyo mekatoro ni seihin shukka setsubi, jido shoka setsubi mo

Energy Technology Data Exchange (ETDEWEB)

1993-05-05

With an objective to promote capital investments that have been fallen because of the recession in Japan, the Petroleum Department of the Agency of Natural Resources and Energy has decided to take the following measures limited to one year for application. The measures consist of the taxation system for high-level energy saving investment promotion and the taxation system for small business machine investment promotion. In the former system, facilities that are effective for promoting rationalization and serving for environment preservation are admitted a special depreciation of 30% (36% for small business) on acquired prices or a tax deduction of 7% (8.4% for small business). Tax deduction of 7% (8.4%) is granted on leased assets. However, machineries are subject to a requirement of the price to be higher than 2 million yen (2.7 million yen in leasing). As a result, petroleum product shipping facilities are also covered by the taxation measures. The latter system, which is intended to promote investments by small business corporations, admits a special depreciation of 30% and a tax deduction of 7% for machineries acquired at prices above 2 million yen. Electronic computers and facsimile machines are also subjected to the taxation measures if their prices are higher than one million yen.

Achievement report for fiscal 1998. Energy consumption efficiency improvement model business for developing nations (Demonstration research project on new cooling system in cement clinker production); Hatten tojokoku energy shohi koritsuka model jigyo seika hokokusho. Cement clinker reikyaku sochi ni kakawaru jissho kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The project aims at energy saving and CO2 emission reduction for a clinker cooling system (CCS), and a demonstration test was conducted at a demonstration cement plant in Indonesia. The plant started operation using the new CCS aiming for the enhancement of cooling and heat recovery efficiency. The actually achieved heat recovery efficiency attributable to the adoption of the new CCS was 60.8% against the target of 68%, this meaning an improvement of 8% over the value recorded prior to the new CCS adoption. As for increase in recovered heat due to heat recovery efficiency improvement of the CCS itself, it was 31kcal/kg-clinker. The heat reduction rate throughout the system thanks to the new CCS was 40kcal/kg-clinker. The kiln secondary air temperature increased for improved burner combustion performance for a rise of the clinker burning degree to 12kcal/kg in terms of calorie, and thus a reduction of 52kcal/kg-clinker in total was achieved. No mechanical trouble was reported with the new CCS. Investigations were conducted into cement supply/demand and technological trends in Indonesia, Vietnam, and China. Learnings from the investigation of German cement making technologies were fully utilized in the designing of the new system. (NEDO)

FY 1999 report on the results of the contract project 'The model project for facilities for effective utilization of industrial waste at the industrial complex in Thailand.' Separate Volume 4 - FY 1999 project; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 4

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of reducing the consumption of fossil fuel by recycling industrial waste for effective use as petroleum substituting energy in Thailand where the amount of industrial waste is expected to increase, a model project on facilities for effective use of industrial waste at the industrial complex was carried out, and the FY 1999 results were reported. Concretely, the industrial waste generated from each plant at the industrial complex owned by IEAT is to be incinerated in fluidized bed incinerator, and the process steam is to be generated by recovering waste heat by waste heat recovery boiler and to be supplied to plants within the complex. In this fiscal year, the first year of the project, the attachment to the agreement was prepared in terms of the allotment of the project work between Japan and Thailand, various kinds of gist, schedules, etc. and signed. After that, the following were conducted at the Japan side according to the attachment to the agreement: determination of the basic specifications for facilities, basic design, detailed design, manufacture of a part of the equipment, etc. Separate Volume 4 included the results of the inspection of the tank, pump, blower, etc. (NEDO)

FY 1999 report on the results of the introductory study on the global environmental industry technology. Study of the technology to recycle organic waste as resource in the chemical industry; 1999 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu seika hokokusho. Kagaku kogyo ni okeru yukisei haikibutsu no saishigenka gijutsu no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

An investigational study was conducted of applicability/viability of the technology to recycle as resource the organic waste and CO2 discharged from the chemical industry, etc., and the FY 1999 results were summarized. As to the production of hydrogen from the organic waste, a bioreactor was developed which enables the production of hydrogen of 58 mmol/L/hr using Enterobactor aerogenes by the isolation bacteria method, and it successfully enabled the production of hydrogen from biomass resource. Further, the micro-flora method can be responded to a variety of substrates, but in this method the hydrogen production rate is not as high as in the isolation bacteria method at the present time. Concerning the method to convert CO2 to useful organic resource by the hydrogen produced, an experimental value of the maximum production rate of 149g/L/d which is high was obtained in case of acetic acid. Moreover, the paper described an outline and the basic concept of the recycle system of energy and carbon resource which integrates the production of energy from organic waste being considered at the present time and the production of useful matters from CO2. (NEDO)

FY 1999 report on the results of the contract project 'The model project for facilities for effective utilization of industrial waste at the industrial complex in Thailand.' Separate Volume 5 - FY 1999 project; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 5

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of reducing the consumption of fossil fuel by recycling industrial waste for effective use as petroleum substituting energy in Thailand where the amount of industrial waste is expected to increase, a model project on facilities for effective use of industrial waste at the industrial complex was carried out, and the FY 1999 results were reported. Concretely, the industrial waste generated from each plant at the industrial complex owned by IEAT is to be incinerated in fluidized bed incinerator, and the process steam is to be generated by recovering waste heat by waste heat recovery boiler and to be supplied to plants within the complex. In this fiscal year, the first year of the project, the attachment to the agreement was prepared in terms of the allotment of the project work between Japan and Thailand, various kinds of gist, schedules, etc. and signed. After that, the following were conducted at the Japan side according to the attachment to the agreement: determination of the basic specifications for facilities, basic design, detailed design, manufacture of a part of the equipment, etc. Separate Volume 5 included the drawing of the basic design, drawing of building/design, drawing of manufacturing equipment, etc. (NEDO)

FY 1999 report on the results of the contract project 'The model project for facilities for effective utilization of industrial waste at the industrial complex in Thailand.' Separate Volume 6 - FY 1999 project; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 6

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of reducing the consumption of fossil fuel by recycling industrial waste for effective use as petroleum substituting energy in Thailand where the amount of industrial waste is expected to increase, a model project on facilities for effective use of industrial waste at the industrial complex was carried out, and the FY 1999 results were reported. Concretely, the industrial waste generated from each plant at the industrial complex owned by IEAT is to be incinerated in fluidized bed incinerator, and the process steam is to be generated by recovering waste heat by waste heat recovery boiler and to be supplied to plants within the complex. In this fiscal year, the first year of the project, the attachment to the agreement was prepared in terms of the allotment of the project work between Japan and Thailand, various kinds of gist, schedules, etc. and signed. After that, the following were conducted at the Japan side according to the attachment to the agreement: determination of the basic specifications for facilities, basic design, detailed design, manufacture of a part of the equipment, etc. Separate Volume 6 included drawings of assembling of the equipment such as crane, crusher and valve. (NEDO)

Achievement report on research and development in the Sunshine Project in fiscal 1979. Research on hydrogen manufacturing technologies (Research on equipment materials for iodine system cycle); 1979 nendo netsukagakuho ni yoru suiso seizo gijutsu no kenkyu seika hokokusho. Yosokei cycle no sochi zairyo no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-03-01

From among researches on hydrogen manufacturing technologies using thermo-chemistry in the Sunshine Project, discussions were given on equipment materials, with the second-stage reaction in the iodine system cycle as the object. This paper describes achievements in fiscal 1979. The reaction produces MgO, I{sub 2} and O{sub 2} from Mg(IO{sub 3}){sub 2}. Corrosion tests were performed by using test pieces made of Ni alloy, iron-Ni-Cr alloy, Ti alloy, Zr alloy, Nb and Ta. These materials are thought to have excellent corrosion resistance in high temperature gaseous phase composed of iodine, oxygen and water. Corrosion tests were carried out also by using sheet formed test pieces of 24 kinds of alloys and six kinds of commercially available non-ferrous metallic materials in different temperatures and atmospheres, mainly the iodine plus oxygen plus H{sub 2}O mixed gas atmosphere at 600 degrees C. The corrosion resistance of the tested materials can be divided into three ranks. Materials having relatively good resistance were Ni-50Cr alloy and Co group alloy. Materials having good corrosion resistance are very little affected by water content. The higher the temperature, the more the metal corrosivity has increased. Preliminary discussions were given on pipe formability in materials having good corrosion resistance as the equipment piping materials. Their mechanical properties were also tested. This paper also describes corrosion resistance tests under heat transferring condition by using pipe-formed test pieces. (NEDO)

Achievement report for fiscal 1999 (edition B) on auxiliary New Sunshine Project. Development of coal hydrogasification technology (Research by using experimental device); 1999 nendo New Sunshine keikaku hojo jigyo seika hokokusho (B ban). Sekitan suiso tenka gaska gijutsu kaihatsu - Jikken sochi ni yoru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective of using practically the coal hydrogasification technology (the ARCH process), developmental research has been performed on important elementary technologies using different experimental devices. This paper summarizes the achievements in fiscal 1999. In the research by using a small testing apparatus, the Taiheiyo coal was used to have performed demonstration operation on the replacement natural maximized case, the heat efficiency maximized case, and the BTX maximized case. As a result, the three cases were found nearly as anticipated in the simulation, whereas the replacement natural gas maximized case has achieved the targeted whole coal conversion rate of 60% or more. However, the BTX maximized case presented a value lower than the targeted BTX yield of 12%. In the developmental research on the injector, the injector having been fabricated for the hot model test was given another combustion test, where the focal temperature of 1,200 degree C or higher was derived. The hot model test has verified the non-agglomeration performance of coal by using as parameters the focal temperatures, coal cross sectional area loads, coal types, and injectors. It was verified that the Taiheiyo and Shin Mu coals do not agglomerate excessively. (NEDO)

Achievement report for fiscal 1998 (edition B) on auxiliary New Sunshine Project. Development of coal hydrogasification technology (Research by using experimental device); 1998 nendo New Sunshine keikaku hojo jigyo seika hokokusho (B ban). Sekitan suiso tenka gaska gijutsu kaihatsu - Jikken sochi ni yoru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

With an objective of using practically the coal hydrogasification technology (the ARCH process), developmental research has been performed on important elementary technologies using different experimental devices. This paper summarizes the achievements in fiscal 1998. In the research by using a small testing apparatus, the Taiheiyo coal was used to have derived hydrogasification data (distribution and yield of the reaction products) in case of having changed the reaction pressure, temperature rising rate, and H{sub 2}/caoal ratio, and to verify the possibility of increasing the BTX yield by installing a temperature zone in two steps. In the developmental research on the injector, a combustion test and a coal feeding test were performed on the injector having been designed and fabricated in the previous fiscal year to verify the basic performance and evaluate the heat resistance and durability. With respect to the hot model test, a test installation was completed with the injector mounted to conduct the trial operation and test. In addition, development was conducted on the coal temperature rise simulation as the second phase of developing the simulation of mixing of coal with high-temperature hydrogen and temperature rise. (NEDO)

Fiscal 1999 achievement report. Venture seed pickup type international cooperative research project (Development of ultrahigh-speed terabyte optical disk storage device); 1999 nendo venture seeds hakkutsugata kokusai kyodo kenkyu jigyo seika hokokusho - venture seeds No.7. Chokosoku terabyte hikari disk kioku sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts are made to submit a concrete, industrialization-capable proposition for a huge-volume high-rate data storage device to be connected directly to the optical fiber communication network. The terabyte optical disk storage device is based on the patented technologies owned by some organizations participating in the project, and embodies a 1-terabyte memory and a 1-Gbps data transfer rate in a CD-size disk with CD/DVD compatibility not affected. The road to a novel, huge-volume, ultrahigh-speed data storage device was open when the basic principle of collinear-polarization digital volume holography was successfully confirmed. A new optical disk medium was fabricated for recording digital volume holograms, and a success was attained in retrieving records on a terabyte optical disk evaluation system. A novel spatial light modulator was successfully fabricated using the magnetooptic effect. This will enable improvement on transfer rates in digital volume hologram retrieval devices and introduction of such devices into optical communication in the field of information technology. (NEDO)

Achievement report for fiscal 1997 (edition B) on auxiliary New Sunshine Project. Development of coal hydrogasification technology (Research by using experimental device); 1997 nendo New Sunshine keikaku hojo jigyo seika hokokusho (B ban). Sekitan suiso tenka gaska gijutsu kaihatsu - Jikken sochi ni yoru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

With an objective of using practically the coal hydrogasification technology (the ARCH process), developmental research has been performed. This paper summarizes the achievements in fiscal 1997. In the research by using a small testing device, the Taiheiyo coal was used to have derived hydrogasification data (distribution and yield of the reaction products) in case of having changed the temperature, residential time and H{sub 2}/caoal ratio at a pressure of 7.0 MPa. In the developmental research on the injector, a test to verify mixing performance was performed by simulating the coal/hydrogen with gas/gas and coal/gas at normal temperature and pressure. Furthermore, discussions were given on the heat conduction analysis and cooling structure, whereas an injector was designed and fabricated. With respect to the hot model test to verify the performance of the injector, detailed design and partial fabrication of the test device were carried out. In addition, development was conducted on the coal/gas system mixing simulation to simulate the states of dispersion and mixing of the coal as the first phase of developing the mixing and temperature rise simulation. (NEDO)

Report on a survey in fiscal 1999. Survey on trends in developing innovative technologies related to reducing CO2 emission in departments consuming great quantity of energy, such as petrochemical industry; 1999 nendo sekiyu kagaku kogyo nado energy tashohi bumon ni okeru CO{sub 2} sakugen ni kansuru kakushinteki gijutsu kaihatsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A survey was performed on the state of developing energy saving and CO2 emission reducing technologies in the following fields: (1) distillation technologies, (2) combustion technologies, (3) heat transfer and conduction technologies, and (4) technologies to convert and fix generated CO2. While the technologies in the field (1) are of the matured domain, technologies providing 20 to 60% energy saving effect have been developed. In the field (2), gas turbine combustion can achieve an overall plant thermal efficiency of 50% or more, whereas a trial calculation indicates that CO2 emission can be reduced by 22%. Catalytic combustion is noticed as a measure to make low NOx emission possible. A composite type catalytic combustor for gas turbines demonstrated that NOx emission of less than 5 ppm can be achieved. In the field (3), energy saving effect higher by 52% than in the warm wind room heating system has been obtained. Development has been made on heat storing materials that have phase change temperature of higher than 80 degrees C and large latent heat storage quantity. In the field (4), researches are advanced in a TiO{sub 2} catalyst that uses sunlight. A catalyst that is methanated at high speed with CO2 conversion rate at nearly 100% has been developed. In methanol synthesis, a catalyst that has high selectivity even at low temperatures has been developed. (NEDO)

Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium--Creation of key industries (Research and development of emission-free material separation and recycling process technologies for spent electric/electronic products); 1998 nendo shiyozomi denki denshi kogyo seihin no emissionless sozai bunri saisei junkan system no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The personal computer is taken up as a sample, and studies are conducted about a system for separating and recovering recyclable materials. For the high-speed cutting and crushing of materials and their compaction, a water-jet cutting method is employed, which enables the unification of chip sizes after cutting, the prevention of dust generation, and the realization of clean working environments. For the separation of copper wires from their coats, a high-speed peeling machine is developed, and the copper wires are recovered for reuse. Fluorine plastics and polyester resin that constitute the coats do not show deterioration in their resin properties when put back into use. As for the powder resulting from the crushing of print circuit boards, it produces gas and unburnt carbon when subjected to heat treatment at 600 degrees C in inactive gas. The problem to arise from this recovery method is how to lower the cost. The separation of pelletized polymers and metal constituents can be accomplished by changing the ablation generation limit energy level during excimer laser irradiation, and this allows them to be recycled. (NEDO)

R and D of suitable unit to heightening in grade of mobile wireless telegraphy system; Test on data transmission characteristics and research on transmission method. Ido musen system no kodoka ni tekigo kano na sochi no kaihatsu kenkyu; Deta denso tokusei shiken oyobi denso hoho no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Onigawara, Shuichi; Koyama, Masayoshi; Masunaga, Katsutoshi [Kyushu Electric Power Co., Inc., Fukuoka (Japan)

1989-03-30

In order to heighten the grade by the present mobile wireless telegraphy system, through the experimentation and research on both data transmission and error correction methods, both data and facsimile transmission were confirmed to be possible together with the following result: In the character transmission by a CPU connection and other encoded transmissions in which even an error by one bit considerably influences the contents of data, 1200bps, as able to be widened in service area, is profitable. While the data transmission in the mobile wireless telegraphy generates many errors due to phasing and noise along the propagation route. To attenuate those errors, error correction encoding is effectively applied with a correction method to be selected by kind of data. Further the 150MHz band, as more largely influenced by urban noise than the 400MHz band, narrows service area in the urban district. While the mobile wireless telegraphy is restricted in frequency band region. 12 refs., 26 figs., 9 tabs.

FY2000 report on the survey results of medical/engineering cooperative research project, additional research on {sup 13}C-MRS for non-invasion type brain metabolism measurement; 2000 nendo igaku kogaku renkeigata kenkyu jigyo mushinshuteki no taisha keisokuyo {sup 13}C-MRS sochi ni kakawaru tsuka kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The basic data are collected by the experiments, in order to optimize the {sup 13}C-MRS analyzer for non-invasion type brain metabolism measurement. The tests are conducted for normal aged volunteers and volunteer patients of, e.g., dementia as the subjects. Each subject is orally dosed with glucose marked with {sup 13}C at the 1-site, and the metabolized {sup 13}C glucose signals from two points in the back of the head are observed as the MR spectra for a total of 3 hours. The time-series data of the {sup 13}C glutamic acid and glutamine signals are analyzed, to determine metabolism speed of the TCA circuits, among others, which provides important information for understanding the brain cell functions. It is 0.33{mu}mol/g/minute as the average of the 5 subjects of normal aged volunteers, which is on a level with that of the young volunteers. On the other hand, it is 0.26{mu}mol/g/minute as the average of the 4 subjects of volunteer patients of dementia, although there is no difference of statistical significance between these values. These results, therefore, suggest that the patients of dementia tend to have deteriorated brain metabolism than the healthy persons. (NEDO)

Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Chromosome image analysis and diagnosis device with confocal scanning laser microscope; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kyoshoten laser kenbikyo ni yoru zensenshokutai gazo kaiseki shindan sochi

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

The device is now satisfactorily capable of all image processing functions (bi-levelling, color deviation, brilliance adjustment, etc.) with the exception the karyotyping function. A substance that emits fluorescence by laser excitation is developed (for labelling the probe). A direct labelling method is studied, in which nucleic acid probes (nucleic acid labelled for chromosomal identification) will prove to be remarkably high in sensitivity. A new fluorescent reagent is synthesized, which is a BHHCT-4-dUTP to act as a nucleic acid probe. It is found that the new substance is superior to the conventional fluorescent substances in terms of stability and that all chromosomes may be forced into hybridization (selective combination of a probe with a peculiar chromosome) when various probes are labelled by this substance. A programing unit is constructed for a chromosomal aberration database. Items needed relative to chromosomes and parameters relative to chromosomal aberration data are appropriately arranged, and conditions to satisfy for their development into a database are studied. A rough design of an interface is complete. (NEDO)

FY 1998 report on the results of R and D projects by local consortiums for immediate effects. R and D of high-efficiency, high-performance forming machines (HPFM) using electrophoretic techniques; 1998 nendo denki eido gijutsu wo mochiita kokoritsu takino seikei sochi (HPFM) no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The R and D project has been implemented for novel high-performance forming machines (HPFMs) which handle slurry-based stock materials, in order to impart diversified functions to a wide range of ceramic-based materials covering from traditional to fine ceramic materials, and improve their productivity. For slip casting which uses traditional slurry stock materials, electricity is passed through the work by installing electrodes in each section, to control growth speed and composition of the layers, which are inconceivable by the conventional method for each section. For casting alumina slurry as the fine ceramic-based material, the electrophoretic techniques are also applied, in an attempt to form complex shapes at high efficiency, and to control the inclined structures and compositions/structures at specific sections. For development of the machines on a trial basis for traditional materials, reduction of weight and increasing thickness of the bottom side are attempted for hand-washing bowls, leading to weight reduction of 25% at the maximum. For fine ceramic-based materials, the forming systems are developed, on a trial basis, for fine pipes and sheets. (NEDO)

Development of reader for the demand data from compound demand meter for power supply/demand (CDM). Development of recommended tools for load leveling in existing works; Denryoku jukyuyo fukugo keiki kara no demand data yomitori sochi no kaihatsu. Kisetsu kojo no fuka heijunka suisho tool no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Sakamoto, S. [Kansai Electric Power Co. Inc., Osaka (Japan)

1997-10-10

Kansai Electric Power has developed a system which reads the demand data for 30min. stored in the compound demand meter for power supply/demand (CDM), and prints the load curves. It is for customers of high-voltage power of less than 500kW, where load management is less extensive than that in larger users, for initial consulting on improvement of load factor (recommendation of heat storage contracts). It is to be installed on the spot to display the load curves, to allow the expert visiting the site to issue initial proposals immediately. It displays `daily demands by time zone` instead of `monthly power consumption` previously provided, and makes the graph of demands by time zone. It is designed to be compact, light, and easily and safely handled. The field test results indicate that the system can be sufficiently practical with the major performance items. 4 figs., 1 tab.

Study on traffic accidents mechanism with automatic recording systems. Part 2. Application of data from ADR and DMR for practical driver education; Jidosha kiroku sochi ni yoru kotsu jiko hassei mechanism no kenkyu. 2. Jiko data kirokukei (ADR) to unko kirokukei (DMR) no untensha kyoiku eno katsuyo

Energy Technology Data Exchange (ETDEWEB)

Ueyama, M; Ogawa, S [National Research Inst. of Police Science, Tokyo (Japan); Chikasue, H; Muramatsu, K [Yazaki Meter Co. Ltd., Tokyo (Japan)

1997-10-01

A field trial are carried out using automatic receding system; ADR (Accident Data Recorder) and DMR (Driving Monitoring Recorder) installed on 20 commercial vehicles, in order to assess the implications for driver behavior and accidents. The data suggest that the accident mechanism can be explained in terms of situation-specific factor and behavior of drivers just before accident that is, their attitude to the handing and control of vehicles. The data might offer a new information for practical driver education. 3 refs., 9 figs., 1 tab.

Project for the basic survey of enhancing energy consumption efficiency in developing countries. Summary of the Conference on the Policies and Measures of Climate Change Mitigation; Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo. Kiko hendo kanwasaku no seisaku to sochi ni kansuru kokusai kaigi hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The Conference on the Policies and Measures of Climate Change Mitigation was held in Tokyo on January 28, 1997, with participation in the conference from governments, research institutes, industrial circles, NGO, etc. of ten countries including Japan. In the session `technology transfer,` presentations were made on `the current status of the technology transfer, and the expectation and requests` by Australia and Japan which provide technology and by China which receives technology. As a whole, every country recognized importance of technology transfer of both hardware and software, private sectors` taking leadership, the use of international organizations dealing with fund supply and credit guarantee. In the session `tradable permits/quotas,` Dr. A. Haspel, U.S. Department of Energy reported the structure and effect of U.S. tradable emission permits on sulfur dioxide from thermal power plants, and proposed tradable emission permits against greenhouse effect gas. The proposal needs to be further studied and discussed, and it was regarded as too early to include the proposal in the protocol to be conducted at COP3

FY 1991 Research and development project for large-scale industrial technologies. Report on results of R and D of superhigh technological machining systems (Development of advanced machining devices for power-generating members); 1991 nendo chosentan kako system no kenkyu kaihatsu seika hokokusho. Hatsuden shisetsuyo buzai kodo kako sochi kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-01

Described herein are the FY 1991 results of the R and D project aimed at establishment of superprecision machining technologies for developing machining technologies and nano-technologies aided by excited beams. For increasing the excimer laser output, the discharge-exciting technologies necessary for designing the 2kW laser as the final target are established. The service life tests are started to demonstrate the member service life of 10{sup 9} shots or more. For development of the technologies for large-current composite ion beams, the plant is constructed to attain the final targets (100keV, 2A, width: 500mm or more). The currents reaching the substrate are developed to have 2.8mA with the Ar ion and 2.9mA with the Ca ion by, e.g., developing the ion sources and improving functions of the ion beam controlling systems. Researches on the surface modification technologies for producing the superhigh-quality metallic surfaces involve composite ion implantation and providing the modified layer of Ti-B-based hard compound. Corrosion rate of the modified titanium surface in a boiling sulfuric acid solution is reduced from 300mm/year to around 0.13mm/year. (NEDO)

Achievement report for fiscal 1982 on Sunshine Program-entrusted research and development. Research on hydrogen production technology using thermochemical process (Research on materials for devices for iodine-based cycles); 1982 nendo netsu kagakuho ni yoru suiso seizo gijutsu no kenkyu seika hokokusho. Yosokei cycle no sochi zairyo no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-01

The research involves tests and studies conducted for the evaluation of corrosion resistance of various metallic materials in molten iodine and for the selection of materials to stay usable under iodine-handling conditions. In fiscal 1982, an iodine transportation system is studied, and corrosion tests are conducted for panels of carbon steels, various stainless steels, titanium, niobium, tantalum, etc., of the grade available in the market, under the conditions where the temperature is 113-170 degrees C, I{sub 2} contains 0-10wt% H{sub 2}O, and the gas phase is of N{sub 2}+O{sub 2}. It is made clear as the result that the effect of water present in I{sub 2} is fairly grave while the influence is but a little of the intensity of temperature and the amount of O{sub 2} gas on the corrosion rates of the respective materials, that materials other than niobium and tantalum are not usable as corrosion resistant materials, etc. In a real device, it is recommended that composite materials be used in the form of a liner or the like because both niobium and tantalum are high-cost materials and therefore create economic disadvantages if employed for the construction of pipes, heat exchangers, etc. (NEDO)

18th national meeting for energy saving promotion (prize winning case awarded by Ministry of International Trade and Industry). ; Development of air cooling equipment for gas turbine combustion. Dai 18 kai sho energy suishin zenkoku taikai (tsusho sangyo daijinsho jusho jirei). ; Gas turbine nenshoyo kuki reikyaku sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

1993-01-30

This paper describes a development of air cooling equipment for gas turbine combustion in a 1090-MW combined plant and a discussion on its cooling effect. An open-type gas turbine reduces its output when suction temperature rises. This is a characteristic for a combined plant with high heat efficiency not capable of exhibiting its ability in summer. As a result of testing cooling methods, water spraying nozzles utilizing latent evaporation heat of water were installed at a gas turbine suction opening. Effects of cooling the gas turbine combustion air resulted in reducing the gas turbine suction temperature by 1.8[degree]C as a result of water spray at an ambient temperature of 30[degree]C and a relative humidity of 60%, increasing the plant output by 12 MW as a result of cooling the suction air, and improving the heat efficiency by about 0.035%. The amount of ammonia used for reducing nitrogen oxide generation was reduced by 10.8 kg/hr. Under an assumption of experimenting the water spray in summer on a 15-hour per day basis for 50 days, a calculation indicates an annual economic effect of about 13.5 million yen. 8 figs., 8 tabs.

Report on results of feasibility study in fiscal 1986 on use of coal in next generation high efficiency power generation system - research commissioned by Moonlight project propulsion room of Agency of Industrial Science and Technology. MHD generation subcommittee; 1986 nendo jisedai kokoritsu hatsuden system no sekitan gas riyo feasibility chosa kenkyu seika hokokusho (Kogyo Gijutsuin Moonlight keikaku suishinshitsu itaku chosa). MHD hatsuden bunkakai

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

A research study was done on MHD generation by coal gasificating combustion. MHD generation is a very attractive power generation system such that efficiency is as high as 55%, that preservation of the environment is superior, and that coal can be used as fuel. The open cycle seems suitable for a one million kW class as a base load following up load fluctuation of approximately 20%, while the closed cycle for 200-300 thousand kW class doing daily start-stop. With a mind to a scale of 30 MWt, in the open cycle, R and D is required in such items as a coal gas combustor, generation channel, high temperature air heater, and seed/slag recovery device. In the closed cycle, R and D is required in the generation channel, high temperature helium heater/high temperature valve, seed injection/recovery device, operation technique of helium closed loop, etc.. Moreover, as a total system, development is necessary in the areas of conceptual design and optimization method, partial load operation and DSS operation method, for example. (NEDO)

Achievement report on research and development in the Sunshine Project in fiscal 1980. Research on a hydrogen manufacturing technology by using thermo-chemical method. (Research on equipment materials for iodine system cycle); 1980 nendo netsukagakuho ni yoru suiso seizo gijutsu no kenkyu seika hokokusho. Yosokei cycle no sochi zairyo no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

This paper describes research on materials of equipment for the second stage reaction in relation with development on a hydrogen manufacturing technology by using the iodine system cycle in the thermo-chemical method. The second stage reaction produces MgO, I{sub 2} and O{sub 2} by decomposition of Mg(IO{sub 3}){sub 2} at 600 to 650 degrees C. Corrosion tests were carried out by using 25Cr-20Ni steel and Ni-50Cr alloy having shown relatively high corrosion resistance in the researches to date, which were added with trace amount of different alloy elements. The tests were performed in gas mixture of I{sub 2}, O{sub 2} and H{sub 2}O at 600 to 700 degrees C for 48 to 192 hours. The average corrosion rate of 25Cr-20Ni steel was reduced by adding Y(0.2%), Ca (0.2%) or Si+Al (1%Si+1%Al), by which relatively uniform corrosion pattern was shown, and the corrosion resistance was improved remarkably. The average corrosion rate of 25Cr-20Ni steel showed a trend of increasing by adding Si and Nb, and non-uniform corrosion like pitting has occurred, revealing that it is not preferable from the aspect of corrosion resistance. The average corrosion rates of the tested materials tended to become somewhat greater under heat insulated condition than under continuously heating condition. Effect of Mg(IO{sub 3}){sub 2} deposition is very small. (NEDO)

FY 1996 Report on the results of development of photovoltaic power generation system commercialization technologies. Development of device for producing compound semiconductors for photovoltaic cells (Development of flying tester); 1996 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo denchiyo kagobutsu handotai seizo sochi kaihatsu - hikoyo shikenki no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The compound semiconductor production process is tested under a microgravity by the space experiment/observation free flier (SFU), to reduce the photovoltaic power generation cost. Described herein are the FY 1996 results. The device is confirmed to work as planned by the full-scale test conducted in FY 1995, when it stood on the orbit and was recovered by the space shuttle STS-72 January, 1996. The recovered SFU-carried devices, including the electrical furnace and related subsystems, were found to normally function, and it was concluded that they could be evaluated and analyzed after the flight. The comprehensive evaluation and analysis of their electrical, mechanical, thermal functions have confirmed that they functioned and showed performance as planned, demonstrating validity of the designs and production procedures. The test samples were taken out of the recovered combined furnace, focus furnace and single-heat furnace for the space environment utilization tests. The other samples had much more uniform compositional distributions than those produced on the ground. (NEDO)

FY 2000 report on the results of the infrastructure construction project for spreading high-efficiency fuel cell systems/development of test apparatuses for evaluation of fuel cell systems for automobiles; 2000 nendo kokoritsu nenryo denchi system kiban gijutsu kaihatsu / jidoshayo nenryo denchi system hyoka shiken sochi no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This project studies the testing/evaluation methods for spreading fuel cells for automobiles. Described herein are the FY 2000 results. The problems involved in evaluation of the single cell units are classified into those involved in the cell construction and methods of evaluating the operation performances of the single cell units. These problems are analyzed mainly by literature survey. The mode simulation tests will be greatly simplified, if the system can be tested on the bench without being actually boarded on the vehicle. Therefore, this project is aimed at development of a comprehensive mode simulator which can be automatically operated corresponding to the running modes of various countries, to test the performance of FCEV and to examine the effects of each component independently on the vehicle performance. The factors required to reproduce the actual driving states of an FCEV on the bench are analyzed, and the conceptual designs are drawn for the controlling algorithms. It is necessary to standardize the stack and reformer testing methods, in order to evaluate the fuel cell system components. For these objects, the prototype units are constructed to evaluate 10kW direct hydrogen type stacks and 5kW methanol reformers. The units are also constructed to evaluate the high-pressure (1MPa) reformer reactors and hydrogen separation membrane systems. (NEDO)

Research and development project in fiscal 1990 for large industrial technologies. Achievement report on research and development of ultra-advanced processing systems (Development of high-level processing devices for electric power generation facility members); 1990 nendo chosentan kako system no kenkyu kaihatsu seika hokokusho. Hatsuden shisetsuyo buzai kodo kako sochi kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research and development has been performed with an objective to establish the processing technology using excitation beam required for the advanced technology industries, and the ultra-precision machining technology to realize the nano-technology. This paper summarizes the achievements in fiscal 1990. In the research on the large output and long life technology for excimer laser, an average output of 500 W or more was demonstrated achieving the intermediate target by developing and improving the technologies for low electric power gas circulation, high efficiency discharge and excitation, and large output oscillation control. In the research on intensity resistant optical element technology, a prototype device was fabricated to create and process axially symmetrical aspherical shapes, whereas SiC aspherical shape creation and processing were demonstrated at the shape accuracy of three microns or better, and surface roughness of 20 nanometers or less, having achieved the intermediate target. Regarding the large current ion beam, a demonstration device was completed based on improvements and test results on the sheet plasma generator. In the research and development of the high-level processing technology, low-temperature forming technology was developed for oxide ceramic thin films by using the excimer laser abrasion method. (NEDO)

Load leveling of the Tohoku Electric Power Co. Development of ice storage cold-water manufacturing unit/solid organic waste treatment equipment using midnight power for cold district; Tohoku Denryoku no fuka heijunka. Kori chikunetsu reisui seizo unit no kaihatsu, shin`ya denryoku riyo kanreichi muke kokei yuki haikibutsu shori sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

An ice storage cold-water manufacturing unit that can manufacture cold water at a stable temperature near 0degC by using midnight power and a solid organic waste treatment facility were developed. The high-speed melting of ice is required to stabilize the cold-water temperature. Therefore, experimental investigation was performed. A piece of flake-shaped ice whose surface area and storage quality are balanced was used. A system that melts ice using the melting tank installed outside an icebox, and a high-speed melting system of ice based on the mixing unit installed in a melting tank were also used together. In the validation test of a prototype for smaller food factories, the following was confirmed. Manufacturing of cold water at about 1degC, amount of cooled water, stability of output water temperature for a change in water temperature, and good storage of ice in an icebox. In the prototype developed for a solid organic waste treatment facility, satisfactory performance was confirmed for following. Temperature in a fermenter when wastes were put, moisture content in a fermenter, pH value, net loss when the refuse of fish is put, and saving of an electricity rate. 6 figs., 2 tabs.

FY 1993 report on the results of the technology development for the commercialization of the photovoltaic power system. Development of the solar cell use compound semiconductor production system - development of flight use testing machine; 1993 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo denchiyo kagobutsu handotai seizo sochi kaihatsu (hikoyo shikenki no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

For a new breakthrough of the technology of the photovoltaic power generation, the paper aims at developing a combined heating furnace, a focal heating furnace and a single heating furnace which are necessary to produce crystals of the substrate of compound semiconductors for high quality solar cell under the microgravity environment obtained in the space, and also the systems related to the functions indispensable to the operation of the above-mentioned furnaces. This report is Vol. 2/3, and described the mission operation in Chapter 7, repair of PFM battery in Chapter 8, mechanical system ground support equipment and maintenance/inspection in Chapter 9, and electrical system ground support equipment and maintenance/repair in Chapter 10. In Chapter 7, described were the arrangement of operation of electrical furnace, operation manual of electrical furnace, procedures for operation, database, training, rehearsal plan, etc. In Chapter 8, of the battery repair plan, the paper carried out the repair design/repair work of battery, and described the state where a test to accept the test specifications is possible. In Chapter 9, indicated were the documents for application and reference of the maintenance/inspection of MGSE. In Chapter 10, the paper reported on the repairs for adaptation for the maintenance and lunching work of EGSE. (NEDO)

Fiscal 1998 achievement report on regional consortium research and development project. Venture business raising type regional consortium - small business creating base type (Development of simplified diagnostic equipment for cardiovascular disorders using electrical and ultrasonic measurements); 1998 nendo choonpa oyobi denki keisokuho ni yoru kan'igata shinkekkankei kino shindan sochi no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development is conducted for the construction of a simplified system that will measure various values related to arteriosclerosis and resultant dynamic changes in blood flows, changes in cardiac muscle contraction characteristics, etc. In the development of the technology of cardiac output measurement, a measuring device using an impedance meter and an electrocardiograph is completed. An algorithm is developed for detecting irregular pulses in the electrocardiogram. In relation to cardiac muscle contraction characteristics, a sonocardiometric device is improved for the development of a device capable of measuring movements in the left ventricle walls. An algorithm is developed for the automatic recognition of the septum and the external walls in an M-mode image. In the development of a device for measuring dynamic changes in blood flows, a software program is completed, which uses a two-way rheometer to measure blood flow rates in shallow-seated arteries such as carotid arteries for the analysis of the maximum blood flow rate, acceleration, pattern, etc. In the development of an analyzer for blood vessel structures, a system capable of blood vessel structure analysis and tracking of fluctuations in walls due to cardiac cycles is developed. (NEDO)

Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Research and development of photovoltaic power utilizing system and peripheral technologies (Study of peripheral device for AC module); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (AC module yo shuhen sochi no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For widening the application of photovoltaic power generation, the AC (alternating current) module technology was examined for validity, and effective ways to utilize the technology and tasks to solve for its further development were studied. In fiscal 1999, concerning the validity of the AC module technology, it was shown quantitatively that attention should be paid to the inhibition of radio interference although the AC module was the more advantageous when under the influence of shadow. In the study of various measures for utilizing the technology, it was shown that, although the technology contained many tasks to discharge, such as need for downsizing and cost reduction, improvement on environmental resistance, and the prevention of radio interference, yet it had many advantages expected to turn up in the future, such as reduced influence of shadow, high flexibility in system design, and decreased installation cost. In the study of technical tasks to discharge in the course of development, it was stated that AC module integrated inverters (MICs) were already on the market, that an autonomous distributed type system control method suited the purpose of AC module systems, and that it was important to develop a thin MIC technology for application in the next generation. (NEDO)

Report on technological achievements in fiscal 1999. Institutions for research and development of new environmental industry creating type technologies (Development of harmful substance reducing device for incineration furnaces using high-efficiency power pulse technology); 1999 nendo shinki kankyo sangyo soshutsugata kenkyu kaihatsu seido seika hokokusho. Kokoritsu pulse power gijutsu wo mochiita shokyakuroyo yugai busshitsu sakugen sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Development has been proceeded on a harmful substance (SOx, NOx, Dioxine, etc.) reducing device for incineration furnaces that can be installed retroactively to existing incineration facilities, using high-efficiency power pulse technology of energy saving type, and discharge in honeycomb ceramics. The developmental activities were advanced by dividing them into researches on (1) research of gas decomposing devices, (2) research of pulse plasma electric power source, and (3) research of SI thyristor for pulse. In the research (1), a pulse plasma experiment and a gas decomposing experiment were performed. In the former experiment, discussions were given on effects of discharge electrode structure on discharge in the honeycomb ceramics, wherein it was made clear that employing the mesh-comb type electrode structure can realize discharge along the ceramics surface. In the latter experiment, it was revealed that the simulated gas (dibenzofuran) can be decomposed to 90% by using a coaxial cylindrical reaction device. In the research (2), studies were performed on increasing voltage and current in the device, as well as on semiconductor driving circuits. In the research (3), studies were made on the high-quality gate zone forming method and the quality conduction zone forming method. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Machine industry technology field (Semiconductor equipment); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) kikai sangyo gijutsu bun'ya (handotai seizo sochi bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a semiconductor equipment field, viewing until 5-10 years after. For the future semiconductor industry, the favorable cycling of creation of new demands through performance improvement, and further technology innovation through market expansion is essential absolutely. Since technology development is followed by investment, not only the performance of each equipment but also the higher productivity and cost balance of the whole factory are essential. Self-intelligent function and networking are thus necessary for the equipment. As measures for environment preservation and energy saving, such innovative technologies are required as recycling, reuse, reaction process improvement and alternative technology. Because of diverse final products and a short life time of products, a large-scale collective investment is becoming difficult. A mini-line sequential investment production system according to demand scales is under investigation. Some issues such as micro-technology, realization of 300mm wafer, modularization, CIM, reliability and standardization are also described. (NEDO)

FY 2000 report on the results of the regional consortium R and D project - Regional consortium R and D field. First year report. Development of an on-line/real-time dioxin measuring system; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium kenkyu kaihatsu bun'ya. Dioxin no on line real time keisoku sochi no kaihatsu (dai 1 nendo) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the supersonic molecular jet resonance multiple photon ionization mass analysis method (SSJ method) as basement technology, the development was proceeded with of a portable dioxin spectrometer to measure dioxins emitted from incinerator on line and at real time and to control/improve the state of combustion. Studies were made in the following three fields: 1) development of pico second wavelength variable color laser; 2) development of a flight hour type mass spectrometer; 3) development of the pretreatment technology suitable for analysis of dioxins, precursors, etc. by supersonic molecular jet spectroscopy. In 1), the prototype was fabricated to assess the performance, and it was confirmed that the prototype has the targeted characteristics. In 2), as to the coaxial ionization and ring double skimmer electrode system, the convergence and mass resolution of ion were measured, and a possibility of the commercialization was obtained. In 3), it was confirmed that there is a possibility in rapid pretreatment by alumina fiber filter. (NEDO)

Research report for fiscal 1996 on analysis and evaluation of demonstration tests for establishment of residential photovoltaic power generation load leveling technology. Evaluation on durability of device installed with inverter to protect grid connection; 1996 nendo kenkyu hokokusho. Jutaku you taiyoko hatsuden fuka heijunka gijutsu tou kakuritsu jissho shiken ni kansuru kaiseki hyoka - Inbata tsuki keito renkei hogo sochi no taikyusei hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Discussions and evaluations have been performed on the safety and durability of the device installed with inverter to protect grid connection being an important device in the photovoltaic power generation system. This paper summarizes the achievements in fiscal 1996. The current fiscal year performed data collection and long-term continuous operation according to the durability test program for the device installed with inverter to protect grid connection, as the continuation from the previous fiscal year. In the electrical characteristics, although no large changes have been found in AC overvoltage and AC undervoltage, instability was observed in the detection level. With regard to temperatures in different components, the temperature rise has become nearly the same as in the maximum output continuous operation as a result of the repetition of the operation and shutdown, whereas the influence on the electrical and thermal stresses have increased. Particularly, when temperature rise in the AC side noise filter was given observation, the measurement of conductive high-frequency terminal voltage showed a value higher by several ten dB than in the previous fiscal year. The current fiscal year has gone farther to starting the measurement of noise electric field intensity as the base of electromagnetic interference. (NEDO)

Research report for fiscal 1995 on analysis and evaluation of demonstration tests for establishment of residential photovoltaic power generation load leveling technology. Evaluation on durability of device installed with inverter to protect grid connection; 1995 nendo kenkyu hokokusho. Jutaku you taiyoko hatsuden fuka heijunka gijutsu tou kakuritsu jissho shiken ni kansuru kaiseki hyoka - Inbata tsuki keito renkei hogo sochi no taikyusei hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Discussions and evaluations have been performed on the safety and durability of the device installed with inverter to protect grid connection being an important device in the photovoltaic power generation system. In discussing the durability test items, electrical property changes were observed on AC overvoltage, AC undervoltage, frequency rise, and frequency fall, as the continuation from the previous fiscal year, in order to evaluate temperature rise in different parts due to lapse of operation time and the effects of thermal stress in each component on the stress of the entire product. Furthermore, verification of single operation detecting function, tests on sudden input power change, sudden grid voltage change, and measurement of conductive high frequency terminal voltage were conducted in addition to the above observations. In discussing the durability test methods, repetition of operation and shutdown during the rated operation was adopted in place of the simulated operation using variation in the insolation having been discussed in the previous year. As a result of the tests, no noticeable changes were recognized from the evaluation result after a lapse of 5,000 hours from the start of the operation, as compared to those after the aging operation. (NEDO)

Research report for fiscal 1997 on analysis and evaluation of demonstration tests for establishment of residential photovoltaic power generation load leveling technology. Evaluation on durability of device installed with inverter to protect grid connection; 1997 nendo kenkyu hokokusho. Jutaku you taiyoko hatsuden fuka heijunka gijutsu tou kakuritsu jissho shiken ni kansuru kaiseki hyoka - Inbata tsuki keito renkei hogo sochi no taikyusei hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Tests and discussions have been performed on the safety and durability of the device installed with inverter to protect grid connection, being an important device in the photovoltaic power generation system. The particularly important requirements demanded in the device were specified as maintenance of electric power quality, coordination with the protection system in the grid side, and assurance of safety of personnel and facilities. The current fiscal year has performed operation corresponding to that in the actual field for 20 years in total, and the evaluation tests on electrical characteristics and electric power quality. This paper summarizes the achievements in four years including the results available up to the previous fiscal year. Although no large change has been identified in the electrical characteristics, variance has been found in the detection time of overvoltage in the grid side. With regard to the electric power quality, the value has exceeded 89 dB as the determining condition for the certification test in the conduction interfering waves of 5 kHz to 10 kHz. In addition, it was confirmed that the conductive high-frequency noise terminal voltage in the grid side after the repetition of operations and shutdowns tends to increase according to the operation lapse time. (NEDO)

Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium research and development in its 2nd year--Creation of key industries (Development of energy-efficient catalytic decomposition device for persistent halogen compounds for environmental conservation); 1998 nendo kankyo hozen no tame no nanbunkaisei halogen kagobutsu no sho energy shokubai bunkai sochi no kaihatsu seika hokokusho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Devices that decompose halogen compounds by use of AlPO{sub 4} are built, and studies are made concerning the collection of basic knowledge and findings, the settlement of problems that accompany scaleup, and the elucidation of mechanism of catalytic function occurrence. Tests are conducted at an intermediate plant, when catalytic performance is observed using a unit accommodating 1 liter of catalyst and chlorofluorocarbon (CFC) 12 is subjected to decomposition for the selection of proper operating conditions. Results similar to those from micro-reactor operation are attained when the reaction tube temperature is controlled. On the basis of the results, a real reactor and reaction system are designed and constructed, and CFC12 containing some CFC115 and CFC22 is made to undergo a decomposition reaction in this real reactor. It is then clarified that CFC catalytic decomposition proceeds at a low cost without generating dioxins and that therefore the process is commercially viable. In the study of catalytic adjustment, it is found that adjustment may be sufficiently effected when baking is conducted at 1,000 degrees C even when the extrusion process which demands low manufacturing cost is employed. Studies are also conducted about the mechanism of co-catalytic function occurrence. (NEDO)

Report on results of R and D of coal liquefaction technology under Sunshine Project in fiscal 1981. Development of direct hydro-liquefaction plant (research on liquefaction by bench scale equipment, and research on solid-liquid separation method); 1981 nendo sekitan ekika gijutsu no kenkyu kaihatsu, chokusetsu suiten ekika plant no kaihatsu seika hokokusho. Bench scale sochi ni yoru ekika kenkyu, koeki bunriho ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

This paper explains the results of development of direct hydro-liquefaction plant under the Sunshine Project in fiscal 1981. As element studies for supplementing and supporting a 2.4 t/day PDU (process development unit), in the research using a 0.1 t/day bench scale continuous type equipment of fiscal 1981, a hydrogenation experiment was conducted for anthracene oil and also, an examination was made on the reaction conditions of Taiheiyo coal and Horonai coal, as well as on the catalyst and reaction ratio and on the product material distribution. A medium oil equalizing test was performed using Taiheiyo coal in order to obtain knowledge about equalized medium oil. Liquefaction characteristics in the preheating process and reaction process were elucidated by means of a semi-batch device. Comparative studies were made between domestic and overseas coals, in coal properties and liquefaction characteristics using a shaking type autoclave. The performance of iron-sulfur based catalysts was also examined. In the research on a solid-liquid separation method, the basic properties of coal liquefied crude oil were measured such as general properties, solid grading distribution and distillation characteristics, with the basic tests carried out for standing separation, filtrating separation and centrifuging separation, providing selected materials of the solid-liquid separation method suitable for the crude oil produced by the direct hydro-liquefaction method. In addition, studies were conducted on the use of residual oil generated by solid-liquid separation, providing knowledge of the viscosity and thermal cracking. (NEDO)

Report of National Research Institute for Pollution and Resources for fiscal 1979. Research on conversion of coal to petroleum, research on coal liquefaction, high pressure liquid phase hydrogenation of coal by continuous test equipment, and manufacture of coal chemicals; 1979 nendo sekitan no yuka no kenkyu / sekitan no ekika no kenkyu / renzoku shiken sochi ni yoru sekitan no koatsu ekiso suisoka bunkai / coal chemicals no seizo

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-07-01

Research was conducted on conversion of coal to petroleum for the purpose of securing substitute liquid fuel. Recovery of hydrogen from the waste gas from the conversion process was explained, as were the conversion results from various coals produced in Japan. In coal liquefaction researches with the aim of manufacturing artificial petroleum, a report was made on each of the researches, i.e., the experiment results of coal liquefaction using various catalysts, manufacture of hydrogen by water gas reaction, catalytic action against coal paste, action of mixed oil and pressure against coal paste, result of hydrogen adding test for coal paste using an intermediate scale device, test result of secondary hydrogen addition for coal liquefied oil, and the test result of continuous secondary hydrogen addition for the liquefied oil. In the manufacture of fuel oil by hydro-cracking of coal or tar, a report was made on high pressure liquid phase hydrogenation of coal using a continuous testing device. Aromatic chemicals useful as chemical materials are supposed to be obtained by cutting inter-polymerized-unit bonding to make low molecules from the chemical structure of coal, removing surrounding radicals and simplifying it. A report was also made on the experiment of manufacturing coal chemicals by combination of high pressure liquid phase hydrogenation and hydro-dealkylation. (NEDO)

Report on achievements in fiscal 1998. Development of technologies to put photovoltaic power generation systems into practical use - Research and development of solar beam power generation and utilization systems and ancillary technologies (Development of ancillary devices for AC modules); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (AC module yo shuhen sochi no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Reasonability evaluation was progressed on the fundamental technologies having been proposed in fiscal 1998, and development was made on elementary technologies required for system structuring. The proposals made in fiscal 1998 include the deepening of the evaluations on effectiveness of AC modules, long-term stability evaluation on the system control schemes, trial fabrication and evaluation on AC battery modules, and development and installation of 2-kW demonstration facilities. In the effectiveness evaluation, discussions were given not only on advantages, but also on disadvantages. As the advantageous point, theoretical analyses were progressed on the effect of reducing the output drop due to shading, which was made clear by providing values. Effects of increase in switching units on electric wave interference as a disadvantage were made clear. As a form that can be applied consistently from an independent power source to a system coordination system, a flexible system using the module system comprising of AC modules and AC batteries was proposed as an effective utilization measure. A proposal was also made on an autonomous discrete type system control scheme as a control system that has sufficient expandability, and is durable against disasters. (NEDO)

Fiscal 2000 project of inviting proposals for international joint research - invitation for international proposal (Power generation No.2). Achievement report on development of high-efficiency low-temperature power generation device using SOFC containing yttria-doped ceria layer; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (hatsuden No.2). Yttria gan'yu ceria so wo yusuru SOFC kokoritsu teion sadogata hatsuden sochi no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts continue to develop a solid oxide fuel cell (SOFC) capable of consuming methane, propane, and the like, as fuel directly and of operation at 650 degrees C or lower. The efforts in concrete terms involve the development of an anode material, an electrolyte, and a cathode material not to suffer carbon precipitation and the evaluation of power generation performance of a hydrocarbon fueled single cell. Activities are conducted in the five domains of (1) the fabrication of an SOFC single cell and a preliminary study, (2) evaluation of solid electrolyte thermal stability using X-ray diffraction, (3) anodic carbon precipitation test and single cell performance test, (4) survey of technical trends overseas, and (5) the goal and self-management. In domain (1), technologies are developed to form thin film anodes of Ni-GDC (gadolinium-doped ceria), Cu-GDC, Ni-YSZ (yttria-stabilized zirconia), and the like, for which the ultrasonic spray method and slurry coat method are used. In the study of cell manufacturing, the anode support method and cathode support method are investigated. The anode support method is used to fabricate a thin film, a thin YSZ film is successfully fabricated for typical Ni-YSZ. (NEDO)

FY 1997 - FY 2000 reports on the results of the development of commercialization technology of the photovoltaic power system. Summary. R and D of the photovoltaic power generation utilization system/periphery technology (R and D of high reliability storage batteries); 1997-2000 nendo New sunshine keikaku seika hokokusho (Sokatsu ban). - Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu, Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (Koshinraisei chikuden sochi no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The R and D/evaluation were made from FY 1997 to FY 2000 of lead storage batteries that are applicable to the use for the absorption of abrupt power variations in photovoltaic power generation and peak shift/emergency use power source, and the results were summed up. In the study for prolonging the life, the following were carried out: development of the inexpensive corrosion-resistant lead alloy positive grid applicable to the photovoltaic power generation, development of the negative active material with a high sulfation control effect, selection of silica powder as electrolyte retainer, development of the charging control technology by the multi-stage constant current method, etc. As a result, energy density of the battery was more than 70W/L as a target, and the target life of 3,000 cycles was achieved in the life test. Further, cost reduction and deterioration judgment were studied. In the study of the group of batteries, a management system for group of batteries was developed. As a result of the 1-year field test, there were no problems on durability of the storage case, temperature difference among batteries, rise in temperature, etc. As to the developed seal type lead storage battery, the applicability to the photovoltaic power generation was acquired. (NEDO)

Fiscal 1996 project on the modeling for effective energy consumption in developing countries under a consignment from NEDO. Recent on the results of the demonstrative study on scrap preheater of electric furnace in the iron making process (for public); 1996 nendo hatten tojokoku energy shohi koritsuka model jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Seitetsu katei ni okeru denkiro no genryo yonetsu sochi ni kakawaru jissho kenkyu seika hokokusho (kokaiyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Indonesia is the biggest iron steel producing country in the ASEAN countries. Most of the production is produced by the electric furnace method in which iron steel scrap is used as a material. However, an energy saving measure in this method, the electric furnace scrap preheater using flue gas, has not yet been spread on a full scale. This R and D is aimed at developing jointly with Indonesia an electric furnace scrap preheater for medium/small size electric furnaces which are adoptable to the present iron making situation in Indonesia and installing it to the electric furnace of the iron making plant in Indonesia for a demonstrative study on energy saving, etc. Spread/expansion of the electric furnace scrap preheater which is an excellent energy saving system targeted expansion of energy saving technology not only of Indonesia, but of ASEAN countries and Japan. In this fiscal year, remodeling of part of the system was made by change of flue gas flow for increasing the energy saving effect, and at the same time, a research study was made of a scrap reheater effective as a total system. Moreover, the paper investigated technical data/information in Japan and overseas. 3 figs., 9 tabs.