Fiscal 1997 survey of overseas coal import base arrangement and promotion. Effects of the expansion of coal trade by IPP on the supply/demand of general coal in Asia; 1997 nendo kaigaitan yunyu kiban seibi sokushin chosa. IPP ni yoru sekitan boeki no kakudai ga Asia no ippantan jukyu ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In consideration of the coal situation in the Asia/Pacific region, a study was made of effects of the expansion of coal trade by IPP on supply/demand of general coal in Asia. When aggregating increases in demand of general coal for electric power use in ten Asian counties, they will be an increase of 130.75 million tons in 2005 over 1997. Fifty nine percent of it is equivalent to the increase by IPP and exceeds the demand expanded by electric utilities operators. Further, a possibility is predicted of contracts and coal quality being different from until now. However, there will be a lot of cases in which plans of constructing power plants in Asia are not so developed as expected except Japan, Korea and Taiwan, and also the effect of the currency crisis starting in Thailand largely affects. In terms of the coal supply, countries which export general coal are only China and Indonesia. Indonesian coal is expanding its production and export rapidly and remarkably. The environmental control in Asia has been tightening, and the fuel selected by IPP is mainly coal rather than natural gas. 40 refs., 94 figs., 179 tabs.

Survey on the long-term energy technology strategy. 2. Survey of the basement of the industrial technology strategy settlement (Environmental basement arrangement strategy); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa. 2. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the Japanese industry to cope properly with the age of great competition and to secure the technology competitive force, it is indispensable to collect/analyze a lot of information and develop policies, that is, strategies, for industrial technology. For study of types of technology innovation system, a survey was conducted in FY 1999 of samples of products with comparatively high competitive force. Concept of the product concerned was examined in terms of the enterprise (person) which created the product, enterprise which commercialized it first in the world, etc. As to each of the technologies, factors to get a top share were analyzed. Based on the analyses, factors to get a large share were classified, and the relations with technology were analyzed. With 'Study of industrial technology strategy' issued in March 1999 as reference, 54 of the products of which the world share is more than 75% were extracted. In the table, about the items on creation of technology, technology was classified into the basic technology, similar technology, traditional technology, and combined technology. About the items on improvement/application, it was classified into improvement and usage development. The other items were classified into production technology, users, and development/production cooperation infrastructure. (NEDO)

Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Buildup of base for thermophysical property data for new industry creation); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (shinki sangyo sosei no tame no netsubussei data ni kansuru kiban seibi)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For promoting the creation of new industries, thermophysical data on high-temperature molten bodies, liquid substances, solid materials, and the like were collected, and further measurements were performed; the data were stored in distributed databases; and databases were also developed about access to the Internet. In the study of the thermal properties of high-temperature molten bodies, data were collected from technical literature concerning molten silicon for semiconductor production, that is, 2 about thermal diffusivity, 4 about viscosity index, 30 about surface tension, 8 about density, and 6 about emissivity; and, concerning potassium niobate, 6 about density, 4 about surface tension, and 5 about viscosity index were collected. Thermal properties were measured for molten silicon and molten carbonates. In the study of thermal properties of fluids, data such as PVT (pressure, volume, temperature) values, boiling point pressure, saturated liquid density, isothermal compressibility, cubical expansion coefficient, surplus mol volume, and the like were collected again from technical literature concerning trifluoroethanol and its water solution. Thermodynamic properties of the aqueous ammonia solution comprised of equimolecules were measured. (NEDO)

FY 1998 achievement report on the R and D for accelerating the basement arrangement of the biological resource information. Bioinformatics; 1998 nendo seibutsu shigen joho kiban seibi kasokuka kenkyu kaihatsu seika hokokusho. Bioinformatics

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-04-01

The paper described the FY 1998 results of the development of bioinformatics. All structure/sequence known proteins from all public databases were hierarchically classified systematically and according to similarities among sequences. Individual proteins in each classified group were added with explanatory notes of structure and physiological function. The mutually related information in metabolic system/signal transfer system was also included. The state of each residue position was classified into three states in terms of the solvent accessibility and three states in terms of the secondary structure. Parameter sets of occurrence frequency for each state of 20 kinds of amino acid were made. By these, it can be evaluated how much the arbitrary amino acid sequence is suitable for each structure in database. The data on the structure of low molecular-weight compounds are also incorporated so that the search for the related biomolecular system information becomes possible. The metabolic system/signal transfer system information was made database, the link was formed between each protein and each low molecular-weight compound, and the information on biomolecular networks was made searchable. A system to predict/support protein structure and function was developed. (NEDO)

Fiscal 2000 research and development of technologies for intelligent infrastructure creation and utilization. Development of high-precision screening assay system for endocrine disrupting chemicals and construction of database; 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu. Naibunpi kakuran busshitsu no koseido screening shiken hoho no kaihatsu oyobi data kiban seibi

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development is carried out for the establishment of a system for assaying endocrine disruption now presenting itself as a hazard and for the application of the assay system to important chemicals and chemicals under development for the detection of presence of endocrine disrupting action in them. In this fiscal year, for the establishment of a reporter-gene assay system, cell characteristics were clarified through the determination of the expression sequence of the produced cell, the determination of the stable conservation period of the cell, and the study of the sustenance of activity. Studies were conducted, targeted at the stable supply of cells usable for high-throughput screening. Basic data were collected for the Hershberger assay being developed by OECD (Organization for Economic Cooperation and Development) and for the repeated administration test method for assaying thyroid hormone action by use of pubertal rats. For the assay of impact on environmental organisms, moreover, basic data were collected for the establishment of testing methods using fishes and amphibians. (NEDO)

Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

Application of τc*Pd for identifying damaging earthquakes for earthquake early warning

Science.gov (United States)

Huang, P. L.; Lin, T. L.; Wu, Y. M.

2014-12-01

Earthquake Early Warning System (EEWS) is an effective approach to mitigate earthquake damage. In this study, we used the seismic record by the Kiban Kyoshin network (KiK-net), because it has dense station coverage and co-located borehole strong-motion seismometers along with the free-surface strong-motion seismometers. We used inland earthquakes with moment magnitude (Mw) from 5.0 to 7.3 between 1998 and 2012. We choose 135 events and 10950 strong ground accelerograms recorded by the 696 strong ground accelerographs. Both the free-surface and the borehole data are used to calculate τc and Pd, respectively. The results show that τc*Pd has a good correlation with PGV and is a robust parameter for assessing the potential of damaging earthquake. We propose the value of τc*Pd determined from seconds after the arrival of P wave could be a threshold for the on-site type of EEW.

FY 2000 report on development of the infrastructure to promote use of fuel cells for automobiles. For safety and environmental factors; 2000 nendo jidoshayo nenryo denchi no fukyu kiban seibi seika hokokusho. Anzensei shuhen kankyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Described herein are the results of the FY 2000 activities for safety and environmental factors involved in fuel cell powdered vehicles. The current technical standards and specifications for CNG and LPG fueled vehicles are investigated, to extract the factors necessary to establish the safety evaluation guidelines when these fuels are replaced by hydrogen fuel. The rules extracted and studied include those related to collision and resultant fuel leakage, removal of spark and hot sources, leakage in the fuel system, leakage into containers and passenger rooms, and materials. For the rules on test methods of fuel tanks, the investigated items include fire resistance, impact resistance and permeation loss of fuel from the tanks. For system safety, the investigated items include possible unusual situations, leakage of the electrolytes and electrical shock. The basic data are collected for destruction of the fuel tanks, spout of hydrogen from and electrification of the hydrogen-occluding alloys, flame retardancy of high-voltage wires for automobiles, and hydrogen diffusion simulation. The safety-related technical trends are followed by hearing the related organizations, including automakers. Literature survey and hearing are conducted to investigate the environmental effects of radio wave interference and noise. (NEDO)

Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Development of a screening test method with high accuracy for internal secretion disturbing substances; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu. Naibunpi kakuran busshitsu no koseido screening shiken hoho no kaihatsu oyobi data kiban seibi

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the achievements in fiscal 1999 on developing a screening test method with high accuracy for internal secretion disturbing substances. Development was made in cooperation with the OECD on the screening method that uses as a parameter whether a chemical substance has a hormone-like activity. For the womb breeding assay method to evaluate a feminine hormone-like activity, a reproducibility and comparison test was performed on womb breeding in immature rats administered with ethinylestradiol, the administration routes, and animals used (young and weak rats, and rats whose ovaries have been extracted). In order to evaluate a masculine hormone-like activity, the basic data were collected to develop the Hershberger method, and participation was made in the OECD verification tests. Discussions were given on comparison on castrated and non-castrated rats when 17 {alpha}-methyltestosterone was administered, the administration period of time and reproducibility when immature rats were used. The Hershberger method reactivity was discussed on rats relative to estrogen. In a toxicity test using 28-day repetitive administration, bisphenol A gave impacts on the kidney, the stomach and intestine tubes. (NEDO)

Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Data buildup for assurance of safety of non-ferrous metals); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (hitetsu kinzoku no anzensei kakuho ni shisuru data seibi)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Data were collected, put in an easy-to-use order, and developed into a database for safety assurance for automobiles and transportation equipment built of light metals as represented by aluminum. In the collection and arrangement of existing dynamics data, a database having 52 data relating to dynamic properties was prepared after retrieving data from academic essays previously published in Japan and abroad. In the testing of new materials, a Hopkinson high-speed rod-type impact/tensile tester was used to perform tensile tests at eight load application speeds between 0.5mm/min and 50m/sec for practical aluminum alloys 2024, 2091, 5052, 5083, 5254, 6061, 6063, 6NO1, 7075, and AC4CH. As the results, data on the 5000 and 6000 series alloys which had been insufficient were complemented. Data from a newly introduced multi-functional instrumentation Charpy impact tester were compared for study, correlations between property values obtained from bend test specimens and those obtained from tensile test specimens were evaluated, and then a simplified test evaluation method was proposed. (NEDO)

Intelligent social infrastructure technology. Infrastructure technology support ultra-reliable society; Chiteki shakai kiban kogaku gijutsu. Choanshin shakai wo sasaeru kiban gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This survey was conducted to construct the core of intelligent social infrastructure technology (ISIT), and to investigate its practical application to industries and society. For realizing the ultra-safe and ultra-reliable society, it is necessary to develop the ISIT which can integrate various social infrastructures, such as architecture, city, energy, and lifeline systems required for living. For the systematization of cities, it is necessary to process and control the intelligent information by holding integrated and transverse information in common, as to logistics, lifeline, communication, monitoring, and control. For the communication engineering, the centralized systems are acceleratingly to be converted into the distributed network systems. For the mechanical engineering, intelligent control and robot technology are required. For the architectural engineering, a concept exceeding the conventional antiseismic structure idea is investigated. It is necessary to develop a new information technology providing an intelligent social infrastructures by merging the information networks and the physical world seamlessly. Necessity of ISIT is large for constructing the intelligent and ultra-reliable society consisting of these integrated and organized networks. 84 refs., 68 figs., 6 tabs.

Life cycle analysis of urban infrastructures; Toshi infrastructure seibi no lifecycle bunseki

Energy Technology Data Exchange (ETDEWEB)

Tagashira, N.; Uchiyama, Y. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-05-01

Power supply services, city gas supply services, water supply and drainage services, roads, and buildings were treated as urban infrastructures so as to grasp the resources and CO2 emission consumed in their life cycle. Moreover, the consumption of resources for supporting one person and the emission of CO2 were analyzed to clarify an important point for resource saving and environmental load reduction. The resources used and CO2 emitted for each urban infrastructure were calculated with Kanto districts as a target. For the annual material weight a person, buildings are about 1,200 kg, roads are about 560 kg, and city gas is about 170 kg. Water supply and drainage is about 68 kg, and electric power is about 57 kg. For the annual CO2 emission a person, buildings are about 120 kg-C, roads are about 13 kg-C, and electric power is about 6.6 kg-C. City gas is about 5.3 kg-C, and water supply and drainage is about 4.4 kg-C. In the material weight for each resource, gravel, crushed stone, concrete, and asphalt concrete have a high consumption rate. In CO2 emission, iron, concrete, and gas oil form a high rate. 21 refs., 26 figs., 2 tabs.

FY 1999 report on the survey of the reinforcement of the base for introduction/spread/improvement of clean energy vehicles in the Kinki region, Japan; 1999 nendo chosa hokokusho. Kinki chiiki clean energy jidosha donyu fukyu sokushin kiban kyoka chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Survey was made with the aim of studying measures to be taken for introduction/promotion of clean energy vehicles (CEV) in the Kinki region and of making a guidebook which included 8 CEV introduction menus based on the characteristics/needs in the Kinki region. In the survey of the state of CEV introduction in the Kinki region, a total number of the CEVs introduced in the region was estimated at approximately 5,300 (19.1% of the whole country), which indicated that the CEV introduction was increasing in comparison with the rate of the general vehicles registered (14.6% of the whole country). On the other hand, the fuel supply stations prepared such as eco-station are limited mostly to Osaka prefecture, which showed that the base is still unprepared. From the questionnaire survey made for 367 autonomous bodies and main 73 companies, problems and the needs for the wide area/large quantity spread were grasped, and various basic data were obtained. To solve problems, the setting-up of the Kinki CEV introduction/spread/promotion committee (CEV Kansai) was studied. (NEDO)

Fiscal 2000 survey report on rationalization project for international energy conservation. Preparation of master plan for rational energy consumption (Shanxi Province, China); 2000 nendo kokuasi energy shiyo gorika kiban seibi jigyo chosa hokokusho. Goriteki energy shiyo no tame no master plan sakusei (Chugoku Shanxi sho)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A comprehensive master plan for Shanxi Province was prepared jointly with China for the purpose of promoting rational use of energy and realizing an environmentally harmonious demand/supply structure of energy. This paper describes the fiscal 2000 results. The first phase refers to the surmounting of environmental problems incident to the use of coal and the restoration of regional economy. As countermeasures against air pollution in Taiyuan City, environmental measures were propagated such as simplified flue-gas desulfurization in thermal power plants, energy conservation in coke dry quenching, etc., and desulfurization of coke oven gas. Bio-briquette effective against smoke and soot pollution was carried out, as was general rubbish treatment (e.g., compost and coal/rubbish mixed combustion power generation). Promoted, by the opening of a clean coal center, were sulfur content reduction, coal briquette method, market expansion for CWM, etc. Producing city gas out of coal mine methane gas was also among the ideas considered. With the aim of attaining a Shanxi Province zero emission program, incentives are essential and, for this purpose, support by the national government is desirable including subsidies for investment, low-interest loans, tax deductions/exemptions, and yen-denominated loans from Japan. The second phase is intended for harmony with culture/science/nature, control of global warming and advanced utilization of coal. (NEDO)

FY 2000 report on development of the infrastructure to promote use of fuel cells for automobiles. Establishment of the base data for fuel quality standardization; 2000 nendo jidoshayo nenryo denchi no fukyu kiban seibi seika hokokusho. Nenryo seijo kikakuka no tame no base data chikuseki

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This project is aimed at studies on the effects of impurities and additives in hydrogen and methanol fuels, to establish the base data for fuel quality standardization and thereby to promote use of fuel cells for automobiles. Described herein are the FY 2000 results. Literature survey is conducted for the effects of the impurities on performance of the cells and hydrogen-occluding alloys, and various additives for improving safety, e.g., odorants, flame visualizers for hydrogen, and fuel colorants and flame visualizers for methanol. Under the present standards, the cell and alloy performance may be affected by the impurities, e.g., CO and sulfur compounds. The commercial products are sampled, to analyze the impurity components and their concentrations. Hydrogen produced by various processes contains a high proportion of CO before being refined, which may adversely affect the performance. Methanol sampled from less frequently used refilling stations contains high proportions of carbonyl compounds, and it is necessary to confirm their effects of the reformer. In order to investigate the effects of impurities, the performance tests are conducted using the test apparatuses for performance evaluation of power generation by fuel cells and hydrogen-occluding alloys. Propane is found to be an effective flame visualizer for hydrogen, but should be contained at 5% or more to visualize the flame. (NEDO)

Management efficiency improvement promotion of SS; SS no unei koritsuka sokushin

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

Full amount fund petroleum product marketer and Sumisyo petroleum of Sumitomo accelerate management efficiency improvement of service station (SS). National about 300 places have been developed in within the year Within SS, it aims at break-even point achievement of gasoline, coarse advantage 10 yen per light oil of 1 liter in 84 all tied SS stores. SS which has realized the system of 10 yen in the current is whole about 50%. But, by doing personnel configurations and operational procedures, that they reexamine the balance management, etc. in half remaining SS 12 yen-13 yen; the efficiency improvement is done thoroughly. (translated by NEDO)

Fiscal 1995 survey of the base arrangement promotion for foreign coal import. Investigation on the policy of coal demand stabilization using low grade coal; 1995 nendo kaigaitan yunyu kiban sokushin chosa. Teihin`itan riyo ni yoru sekitan jukyu anteika hosaku ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The paper investigated the trend of and the needs for low grade coal utilization and the seeds of low grade coal utilization technology and studied usability of low grade coal in the future. Importance of low grade coal utilization was described in consideration of features of the Asia/Pacific area in the world coal market, and the trend of production/utilization of low grade coal was examined mostly in countries holding main low grade coals in the Asia/Pacific area. The trend of the technical development contributing to the low grade coal utilization was studied to make it contribute to the extraction of technologies which are regarded as effective in the Asia/Pacific area. A study was made of applicability of the low grade coal utilization technology corresponding to the needs for low grade coal utilization, and at the same time, a study was made of the effect on the coal supply/demand in the Asia/Pacific area in case the low grade coal utilization is promoted helped by the study. Focusing on technical cooperation relating to clean coal technology, a study was conducted of the trend of international cooperation in Japan and various overseas countries and the trend of new cooperation in private sectors, and a discussion was made on how Japan should act toward promotion of low grade coal utilization. 12 figs., 91 tabs.

Emergency housing after natural disaster; Shizen saigaigo no oukyu kyoju kankyo seibi sisutemu ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, Masami [Kyoto University, Kyoto (Japan). Graduate School of Engineering

1998-12-16

In Japan, there were some serious disasters in recent years. In 1991, Unzen-Fugendake erupted and more than 1,000 people were forced to take refuge from their houses. In 1993, Hokkaido-Nanseioki earthquake attacked the south-east area of Hokkaido and more than 3,557 houses were destroyed. In Japan, the government supplies the temporary housing to those who lost house from the natural disasters. The purpose of supplying temporary houses mentioned in the disaster relief law (established in 1947) prescribes the purpose of temporary housing that to rescue the poor who can not afford getting a shelter with their own funds. But actual condition of temporary housing is completely different. Government supplies temporary housing to all those who request temporary housing. The term of using temporary house tend to become longer. The regulation about temporary housing has not been yet up to dated. Many problems concerning about temporary housing originate in outdated regulation. The temporary housing have to be ranked in the part of restoration process from natural disaster. (author)

Magnitude Estimation for Large Earthquakes from Borehole Recordings

Science.gov (United States)

Eshaghi, A.; Tiampo, K. F.; Ghofrani, H.; Atkinson, G.

2012-12-01

We present a simple and fast method for magnitude determination technique for earthquake and tsunami early warning systems based on strong ground motion prediction equations (GMPEs) in Japan. This method incorporates borehole strong motion records provided by the Kiban Kyoshin network (KiK-net) stations. We analyzed strong ground motion data from large magnitude earthquakes (5.0 ≤ M ≤ 8.1) with focal depths < 50 km and epicentral distances of up to 400 km from 1996 to 2010. Using both peak ground acceleration (PGA) and peak ground velocity (PGV) we derived GMPEs in Japan. These GMPEs are used as the basis for regional magnitude determination. Predicted magnitudes from PGA values (Mpga) and predicted magnitudes from PGV values (Mpgv) were defined. Mpga and Mpgv strongly correlate with the moment magnitude of the event, provided sufficient records for each event are available. The results show that Mpgv has a smaller standard deviation in comparison to Mpga when compared with the estimated magnitudes and provides a more accurate early assessment of earthquake magnitude. We test this new method to estimate the magnitude of the 2011 Tohoku earthquake and we present the results of this estimation. PGA and PGV from borehole recordings allow us to estimate the magnitude of this event 156 s and 105 s after the earthquake onset, respectively. We demonstrate that the incorporation of borehole strong ground-motion records immediately available after the occurrence of large earthquakes significantly increases the accuracy of earthquake magnitude estimation and the associated improvement in earthquake and tsunami early warning systems performance. Moment magnitude versus predicted magnitude (Mpga and Mpgv).

FY 2000 survey report on the project for preparation of the international energy utilization rationalization basis. 1st volume. Survey/study for the spread of energy conservation technology; 2000 nendo chosa hokokusho. Kokusai energy shiyo gorika kiban seibi jigyo (Sho energy gijutsu no fukyu no tameno chosa kenkyu to - 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In China which is the largest energy consumption country in the Asian region and has much room for the spread of energy conservation technology, investigational study was made with the aim of widely spreading energy conservation technology and solving environmental problems. To grasp energy supply/demand in China, environmental problems, industrial structure and social system, it is necessary to have process for establishment of data monitoring method, construction of database and model simulation. Proposal for model simulation was made. Further, to make macro-basis assessment of potentiality of energy conservation and environmental effect by sector in China, following the previous fiscal year, study was made on the electric power industry, where there is big potentiality of heightening energy utilization efficiency but the rationalization is not proceeded with. Moreover, in this fiscal year, energy demand is expected to increase with the growing economy, and the traffic field which has a great effect on the environment was added to the investigational research. (NEDO)

FY 2000 survey report on the project for preparation of the international energy utilization rationalization basis. 2nd volume. Survey/study for the spread of energy conservation technology; 2000 nendo chosa hokokusho. Kokusai energy shiyo gorika kiban seibi jigyo (Sho energy gijutsu no fukyu no tameno chosa kenkyu to - 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In China which is the largest energy consumption country in the Asian region and has much room for the spread of energy conservation technology, investigational study was made with the aim of widely spreading energy conservation technology and solving environmental problems. This report summed up the tackling with environmental problems for making improvement in energy conservation. In the study of the CDM introduction based on the heat supply in Beijing city, conducted were the report on the research on the CDM introduction to coal-fired heat supply facilities and small gas boilers and the consideration of possibility/conditions/method of Japan's transfer of technically advanced space heating technology to China. In the study of 'advanced traffic system - Tsinghua University Green Campus Project,' carried out were the simulative study for grasp of the traffic flow in university, consideration of characteristics of exhaust gas at the time of car running on road and the road pollution mechanism, consideration of the study of electric cars considered of the environment. (NEDO)

Report on investigations in fiscal 2000. International infrastructure improving project for rationalization of energy use (Fundamental survey on effective utilization of unutilized biomass energy in ASEAN countries); 2000 nendo kokusai energy shiyo gorika kiban seibi jigyo chosa hokokusho. ASEAN shokoku ni okeru miriyo baiomasu energy no yuko riyo ni kansuru kisochosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to utilize 'biomass' being the unutilized and reproducible energy source, which exists affluently in the ASEAN countries, investigations and discussions have been carried out on electric power generation using palm shells as fuel in Malaysia. This paper reports the achievement in fiscal 2000. The biomass energy plant project was discussed with the followings as the conditions: an output of 1 MW, use of biomass in the form of wastes discharged from oil palm mills, the system of direct combustion process with boiler/steam turbine generation process, and power transmission to public grids. As a result of the discussions, the following conclusions were obtained: reduction of greenhouse effect gas exhaust will amount to 81,540 t-CO2/year, reduction will be realized on white smoke pollution caused by wastes incineration being criticized from various sectors and such harmful gas exhaust as SOx and NOx discharged from fossil fuel power generation, the uncertainty of electric power supply currently depending on DG power generation will be mitigated resulting in acquisition of economic effects, and electric power supply to 1,000 households will be possible, contributing to enhancement of living standard due to electrification. (NEDO)

Arrangement of technical information on photovoltaic power generation systems; Taiyoko hatsuden system kanren gijutsu joho no seibi

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

In order to effectively contribute to the development of the technology required to put them to practical use, technical information on photovoltaic power generation systems, such as the results of overseas and domestic research and development work, which have been obtained by NEDO, were collected, categorized, sorted, and processed to make a data base. This report presents the details of the project for fiscal 1995. Papers from the 10th ECPVSEC held at Lisbon, Portugal in April 1991 and the 6th PVSEC held at New Delhi, India in February 1992, and papers published by NEDO were investigated and arranged. The total number of the papers processed in 1995 is 424 from two international conferences, and 176 from NEDO. The implementation steps consist of the collection of overseas and domestic research reports and other documents, the preparation of summaries of research results reported in those documents, the preparation of brief summaries of data obtained from the results of experiments including numerical data, and the sort and processing of them by research area, material used to fabricate photovoltaic cells, etc. The results of the above work are stored on 3.5 inch floppy disks as MS-DOS text data. The report also provides the general publication through the Internet. 7 tabs.

FY 2000 report on the survey of the project for arrangement of the basis of the international energy utilization rationalization. Survey of diagnosis of energy conservation in main industries of ASEAN countries; 2000 nendo kokusai energy shiyo gorika kiban seibi jigyo chosa hokokusho. ASEAN shokoku shuyo sangyo ni okeru sho energy shindan chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of securing the stable energy supply/demand and contributing to the sustainable economic growth in ASEAN countries, survey of the diagnosis of energy conservation was conducted. In this survey, the diagnosis on energy conservation was made in terms of typical plants/works jointly with ASEAN-side engineers to grasp the actual state of energy consumption of each of the plants and to give advice on energy conservation policies. The countries and companies selected as objects in this fiscal year are a fiber plant in Malaysia (Arab-Malaysian Development Berhad), a paper mill in Indonesia (P.T.Kertas Leces Pulp Paper Mill) and a cement plant in Brunei (Butra Djajanti Cement SDN BHD). Diagnosis was made for each of them on January 15-19, on January 22-26 and on February 5-9, 2001, respectively. Through Workshops No. 1 (November 2000) and No. 2 (December 2000), this diagnosis program was carried out in 2001. On the basis of the results of the diagnosis, presented were the necessary energy conservation policies to be taken. (NEDO)

FY 1998 report on the results of the research and development of fundamental technologies for superconductor applications; 1998 nendo chodendo oyo kiban gijutsu kenkyukaihatsu seika hokokusho. Chodendo oyo kiban gijutsu keknyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

As to the research on the superconductor manifestation mechanism, Y123 monocrystal which was partially replaced with Zn and Ni was manufactured, and it was made clear that the addition of these impurities greatly change anisotropy of superconductors. It was made clear that instability of lattice and magnetism is included in high temperature superconductor. Also made clear was an important role in the Nb/Ba replacement in existence of magnetic flux melting phase transfer and the magnetic field induced pinning effect. The manufacture of Y123 bicrystal membrane was successful by the liquid phase epitaxy method. The manufacture of non-copper base K-Bi-O new superconductor was successful by the ultra-high pressure synthesis method. The stabilized process was established for large size crystals of 15-20mm square in Y base and of 20-25mm square in Nd base. Also successful was the growth by LPE method of crystal with thick membrane of 20mm x 20mm x 10{mu}m on the MgO monocrystal substrate. The non-bicrystalization of Y base Nd base monocrystal was successful, and the peak phenomenon control in Jc-H was found out. By neutron irradiation, the acquisition magnetic field of 3.7T at 77K was achieved using bulk Y base 123 material with diameter of 3cm. And, the critical current density of 60,000 A/cm{sup 2} was achieved at 77K and 3T. (NEDO)

Construction of man-made island `Hakkeijima` in Yokohama; Keikan wo koryoshita jinkoto no jirei (Yokohama Hakkeijima no seibi)

Energy Technology Data Exchange (ETDEWEB)

Kimura, H. [Yokohama City Office, Yokohama (Japan)

1995-01-01

The present paper introduces Hakkei Island reclaimed and opened in Yokohama for the oceanic recreation. Reproducing the natural shoreline, this man-made island is about 24 ha wide. It is divided into seven zones, inclusive of Open Market and Aquamuseum, with a circular passage connecting these zones and peripheral passage along the shoreline for the pedestrians. Having the altitude of 20m at its center, an also man-made hill forms a green belt with planted trees. As facilities, what is characteristic is the Sea Paradise Tower which is 90m high. Having a form combining two triangular pyramid, the roof of Aquamuseum is built of glass and Teflon-coated glass fiber. For the tree-planting, the following two types of green are separately arranged: `skeletal green` attaching importance to the distant scenery, life living and sea breeze protection. `Decorative green` having the theme related to the facilities. Investment made in the infrastructural construction (with the exception of reclamation) and construction of facilities was about 9 and 50 billion yen, respectively. 4 refs., 6 figs.

Fiscal 1994 report. Liquefaction key technology subcommittee; 1994 nendo ekika kiban gijutsu bukai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The subcommittee held the 1st meeting in August 1994 and the 2nd in March 1995, when preceding fiscal year's research results, fiscal 1994 research plans, fiscal 1994 research results, etc., were introduced, and deliberated. In the study of hydrorefining of naphtha, kerosene, and light oil fractions, a nitrogen concentration level of not more than 5 ppm was achieved by refining oils from Indonesian coal. Studies were also made about the two-step hydrorefining system, the relationship between the coal oil refining level and sludge formation, etc. In the research for the development of novel catalysts for upgrading coal oil, the active life of a nickel-supporting catalyst for hydrogenation at the 1st step was somewhat prolonged with an increase in the amount of nickel. In the study of coal liquefaction conditions, an AWIP method was deliberated, wherein liquefaction process waste water was utilized as one of catalytic component adjusting materials. For upgrading liquefaction key technologies, studies were made for catalyst improvement and pretreatment method development, and about the behavior of liquefaction reaction in a high boiling solvent-aided process. (NEDO)

Fiscal 1995 report. Liquefaction key technology subcommittee; 1995 nendo ekika kiban gijutsu bukai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The subcommittee held the 1st meeting in September 1955 and the 2nd in March 1996, when fiscal 1995 research plans and research results were introduced and deliberated. In the study for designing a high-dispersion catalyst and the elucidation of the mechanism of activity expression, catalysts of highly dispersed iron supported on the brown coal surface in various ways were compared with each other in terms of liquefaction activity. Furthermore, geometric changes in the iron catalyst during the sulfurizing process were examined using the XRD (X-ray diffraction) and TEM (transient electromagnetic) methods. An improved catalyst was found to achieve a liquefaction yield near the Yallourn coal liquefaction limit in a high boiling solvent system. Concerning the study of coal oil product applications and refining technologies, reports were delivered on research results relating to the problem of blocking to occur during naphtha fraction refining and measures therefor, inhibition of active metal geometric changes during reaction, methods for separating hetero-compounds from coal oil and application thereof, and so forth. (NEDO)

Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Basic study of measurement of human characteristics); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (Ningen tokusei keisoku ni kansuru kiban kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the development of working conditions fit for aged people and devices for them to operate, their visual function and behavioral characteristics are measured and analyzed. In the study of visual functions, 50 people from local cities and regions and another 50 from Osaka and its neighboring cities are subjected to measurement regarding visual acuity required in daily life, color discrimination, dark adaptation, glare, and the like. In the study of performing characteristics, 500 people are subjected to measurement regarding the scope of movement of upper limbs, their reach, and skillfulness with which the people can move fingers. When brightness, luminance, and contrast are caused to change relative to letters and background, aging is found to exert a great influence on the ease of reading, dark adaptation, and glare. As for the upper limb work range and reachability and the skillfulness in finger movement, it is found that aging narrows down the tolerant work area, lowers the working pace, and greatly affects skillfulness depending on the device operating method, all these disclosing actualities of difference attributable to age and sex. Concerning the device operating position and the ease of device operating force application, new measuring and evaluating methods are worked out, and correlations between the contents of operation and the operating position are seized. (NEDO)

International Symposium for the Promotion of APEC Environmental Technology Exchange; APEC kankyo gijutsu koryu sokushin symposium

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-11

The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet

Programs for promoting new energy introduction into Wakkanai City; Wakkanaishi shin energy donyu sokushin keikaku keikakusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The average temperature in the summer season at Wakkanai is 19 degrees C, and below zero degrees C in the winter season. Solar radiation duration is shorter in November through February due partly to the presence of snow. In terms of total solar radiation amount, the city occupies a middling position in the whole Hokkaido island. As for the force of the wind, a daily maximum wind velocity of 10m/s or stronger occur on 8 to 10 days every month in the period October through May. As projects for promoting new energy introduction, the below-named ones are chosen and subjected to examination for feasibility. They are a wind power generation system for a water purification plant; a district heating system utilizing cogeneration at the city middle sector; a hybrid system of methane fermentation and wind power generation for a public stock-rearing farm; a hybrid system of cogeneration and photovoltaic power generation for Fujimi district accommodation facilities; and photovoltaic power generation as a clean energy introduction system for a general gymnastic hall of Wakkanai City. Since the above-named subjects are all excellent in economy and environmentally-friendliness, it is suggested that efforts be exerted to realize them. (NEDO)

Assessing the Utility of Strong Motion Data to Determine Static Ground Displacements During Great Megathrust Earthquakes: Tohoku and Iquique

Science.gov (United States)

Herman, M. W.; Furlong, K. P.; Hayes, G. P.; Benz, H.

2014-12-01

Strong motion accelerometers can record large amplitude shaking on-scale in the near-field of large earthquake ruptures; however, numerical integration of such records to determine displacement is typically unstable due to baseline changes (i.e., distortions in the zero value) that occur during strong shaking. We use datasets from the 2011 Mw 9.0 Tohoku earthquake to assess whether a relatively simple empirical correction scheme (Boore et al., 2002) can return accurate displacement waveforms useful for constraining details of the fault slip. The coseismic deformation resulting from the Tohoku earthquake was recorded by the Kiban Kyoshin network (KiK-net) of strong motion instruments as well as by a dense network of high-rate (1 Hz) GPS instruments. After baseline correcting the KiK-net records and integrating to displacement, over 85% of the KiK-net borehole instrument waveforms and over 75% of the KiK-net surface instrument waveforms match collocated 1 Hz GPS displacement time series. Most of the records that do not match the GPS-derived displacements following the baseline correction have large, systematic drifts that can be automatically identified by examining the slopes in the first 5-10 seconds of the velocity time series. We apply the same scheme to strong motion records from the 2014 Mw 8.2 Iquique earthquake. Close correspondence in both direction and amplitude between coseismic static offsets derived from the integrated strong motion time series and those predicted from a teleseismically-derived finite fault model, as well as displacement amplitudes consistent with InSAR-derived results, suggest that the correction scheme works successfully for the Iquique event. In the absence of GPS displacements, these strong motion-derived offsets provide constraints on the overall distribution of slip on the fault. In addition, the coseismic strong motion-derived displacement time series (50-100 s long) contain a near-field record of the temporal evolution of the

Three-dimensional site response at KiK-net downhole arrays

Science.gov (United States)

Thompson, Eric M.; Tanaka, Yasuo; Baise, Laurie G.; Kayen, Robert E.

2010-01-01

Ground motions at two Kiban-Kyoshin Network (KiK-net) strong motion downhole array sites in Hokkaido, Japan (TKCH08 in Taiki and TKCH05 in Honbetsu) illustrate the importance of three-dimensional (3D) site effects. These sites recorded the M8.0 2003 Tokachi-Oki earthquake, with recorded accelerations above 0.4 g at both sites as well as numerous ground motions from smaller events. Weak ground motions indicate that site TKCH08 is well modeled with the assumption of plane SH waves traveling through a 1D medium (SH1D), while TKCH05 is characteristic of a poor fit to the SH1D theoretical response. We hypothesized that the misfit at TKCH05results from the heterogeneity of the subsurface. To test this hypothesis, we measured four S-wave velocity profiles in the vicinity (KiK-net site pair is ideal for assessing the relative importance of 3D site effects and nonlinear site effects. The linear ground motions at TKCH05 isolate the 3D site effects, as we hypothesized from the linear ground motions and confirmed with our subsequent SASW surveys. The Tokachi-Oki time history at TKCH08 isolates the effects of nonlinearity from spatial heterogeneity because the 3D effects are negligible. The Tokachi-Oki time history at TKCH05 includes both nonlinear and 3D site effects. Comparisons of the accuracy of the SH1D model predictions of these surface time histories from the downhole time histories indicates that the 3D site effects are at least as important as nonlinear effects in this case. The errors associated with the assumption of a 1D medium and 1D wave propagation will be carried into a nonlinear analysis that relies on these same assumptions. Thus, the presence of 3D effects should be ruled out prior to a 1D nonlinear analysis. The SH1D residuals show that 3D effects can be mistaken for nonlinear effects.

Fiscal 1993 survey of the base arrangement promotion for foreign coal import. Supply to Japan of subbituminous coal of the west of the U.S. (survey of the cost and a potentiality of the cost); 1993 nendo kaigaitan yunyu kiban sokushin chosa. Beikoku seibu arekiseitan no tainichi kyokyu (cost to yunyu chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Subbituminous coal of the Powder River coal field in the west of the U.S. is abundant, about 1/3 in the U.S. in reserve and about 1/4 in production. It is predicted that supply/demand of general coal will be tight from now up to the coming year of 2000 in the Pacific rim region including Japan as center, and therefore, if Japan imports in large quantity the subbituminous coal which exists abundantly and has a great potentiality of the expanding production quantity, Japan can contribute greatly to loosening the supply/demand of general coal in the Pacific rim region. However, there are some problems on the following: long inland transportation distance of more than 2000km, heavy burden of railroad fare, and coal quality, namely high water content, low calorific value, and low ash melting point of the coal being low in sulfur and ash. Accordingly, surveyed were on what level the cost of supply to Japan will be as compared with Australian coal, and whether there is a possibility of import of the subbituminous coal in large quantity at a competitive price. As to the potential import to Japan, the import of this coal will be 2.025 million tons/year at maximum in 2000 if the railroad price is reduced 20% and the blending of 30% at maximum can be realized at the Soma Kyodo Thermal Power Plant. 34 figs., 48 tabs.

Microtremor Array Measurement Survey and Strong Ground Motion Observation Activities of The MarDiM (SATREPS) Project

Science.gov (United States)

Ozgur Citak, Seckin; Karagoz, Ozlem; Chimoto, Kosuke; Ozel, Oguz; Yamanaka, Hiroaki; Aksahin, Bengi; Arslan, Safa; Hatayama, Ken; Ohori, Michihiro; Hori, Muneo

2015-04-01

Since 1939, devastating earthquakes with magnitude greater than seven ruptured North Anatolian Fault (NAF) westward, starting from 1939 Erzincan (Ms=7.9) at the eastern Turkey and including the latest 1999 Izmit-Golcuk (Ms=7.4) and the Duzce (Ms=7.2) earthquakes in the eastern Marmara region, Turkey. On the other hand, the west of the Sea of Marmara an Mw7.4 earthquake ruptured the NAF' s Ganos segment in 1912. The only un-ruptured segments of the NAF in the last century are within the Sea of Marmara, and are identified as a "seismic gap" zone that its rupture may cause a devastating earthquake. In order to unravel the seismic risks of the Marmara region a comprehensive multidisciplinary research project The MarDiM project "Earthquake And Tsunami Disaster Mitigation in The Marmara Region and Disaster Education in Turkey", has already been started since 2003. The project is conducted in the framework of "Science and Technology Research Partnership for Sustainable Development (SATREPS)" sponsored by Japan Science and Technology Agency (JST) and Japan International Cooperation Agency (JICA). One of the main research field of the project is "Seismic characterization and damage prediction" which aims to improve the prediction accuracy of the estimation of the damages induced by strong ground motions and tsunamis based on reliable source parameters, detailed deep and shallow velocity structure and building data. As for detailed deep and shallow velocity structure microtremor array measurement surveys were conducted in Zeytinburnu district of Istanbul and Tekirdag province at about 81 sites on October 2013 and September 2014. Also in September 2014, 11 accelerometer units were installed mainly in public buildings in both Zeytinburnu and Tekirdag area and are currently in operation. Each accelerometer unit compose of a Network Sensor (CV-374A2) by Tokyo Sokushin, post processing PC for data storage and power supply unit. The Network Sensor (CV-374A2) consist of three servo

Microtremor Array Measurement Survey and Strong Ground Motion observation activities of The SATREPS, MarDiM project -Part 2-

Science.gov (United States)

Citak, Seckin; Karagoz, Ozlem; Chimoto, Kosuke; Ozel, Oguz; Yamanaka, Hiroaki; Arslan, Safa; Aksahin, Bengi; Hatayama, Ken; Ohori, Michihiro; Hori, Muneo

2016-04-01

Since 1939, devastating earthquakes with magnitude greater than seven ruptured North Anatolian Fault (NAF) westward, starting from 1939 Erzincan (Ms=7.9) at the eastern Turkey and including the latest 1999 Izmit-Golcuk (Ms=7.4) and the Duzce (Ms=7.2) earthquakes in the eastern Marmara region, Turkey. On the other hand, the west of the Sea of Marmara an Mw7.4 earthquake ruptured the NAF' s Ganos segment in 1912. The only un-ruptured segments of the NAF in the last century are within the Sea of Marmara, and are identified as a "seismic gap" zone that its rupture may cause a devastating earthquake. In order to unravel the seismic risks of the Marmara region a comprehensive multidisciplinary research project The MarDiM project "Earthquake And Tsunami Disaster Mitigation in The Marmara Region and Disaster Education in Turkey", has already been started since 2003. The project is conducted in the framework of "Science and Technology Research Partnership for Sustainable Development (SATREPS)" sponsored by Japan Science and Technology Agency (JST) and Japan International Cooperation Agency (JICA). One of the main research field of the project is "Seismic characterization and damage prediction" which aims to improve the prediction accuracy of the estimation of the damages induced by strong ground motions and tsunamis based on reliable source parameters, detailed deep and shallow velocity structure and building data. As for detailed deep and shallow velocity structure microtremor array measurement surveys were conducted in Zeytinburnu district of Istanbul, Tekirdag, Canakkale and Edirne provinces at about 109 sites on October 2013, September 2014 and 2015. Also in September 2014, 11 accelerometer units were installed mainly in public buildings in both Zeytinburnu and Tekirdag area and are currently in operation. Each accelerometer unit compose of a Network Sensor (CV-374A) by Tokyo Sokushin, post processing PC for data storage and power supply unit. The Network Sensor (CV-374

Microtremor Array Measurement Survey and Strong Ground Motion observation activities of The SATREPS, MarDiM project -Part 3-

Science.gov (United States)

Citak, Seckin; Safa Arslan, Mehmet; Karagoz, Ozlem; Chimoto, Kosuke; Ozel, Oguz; Yamanaka, Hiroaki; Behiye Aksahin, Bengi; Hatayama, Ken; Sahin, Abdurrahman; Ohori, Michihiro; Safak, Erdal; Hori, Muneo

2017-04-01

Since 1939, devastating earthquakes with magnitude greater than seven ruptured North Anatolian Fault (NAF) westward, starting from 1939 Erzincan (Ms=7.9) at the eastern Turkey and including the latest 1999 Izmit-Golcuk (Ms=7.4) and the Duzce (Ms=7.2) earthquakes in the eastern Marmara region, Turkey. On the other hand, the west of the Sea of Marmara an Mw7.4 earthquake ruptured the NAF' s Ganos segment in 1912. The only un-ruptured segments of the NAF in the last century are within the Sea of Marmara, and are identified as a "seismic gap" zone that its rupture may cause a devastating earthquake. In order to unravel the seismic risks of the Marmara region a comprehensive multidisciplinary research project The MarDiM project "Earthquake And Tsunami Disaster Mitigation in The Marmara Region and Disaster Education in Turkey", has already been started since 2003. The project is conducted in the framework of "Science and Technology Research Partnership for Sustainable Development (SATREPS)" sponsored by Japan Science and Technology Agency (JST) and Japan International Cooperation Agency (JICA). One of the main research field of the project is "Seismic characterization and damage prediction" which aims to improve the prediction accuracy of the estimation of the damages induced by strong ground motions and tsunamis based on reliable source parameters, detailed deep and shallow velocity structure and building data. As for detailed deep and shallow velocity structure microtremor array measurement surveys were conducted in Zeytinburnu district of Istanbul, Tekirdag, Canakkale and Edirne provinces at about 140 sites on October 2013, September 2014, 2015 and 2016. Also in September 2014, 11 accelerometer units were installed mainly in public buildings in both Zeytinburnu and Tekirdag area and are currently in operation. Each accelerometer unit compose of a Network Sensor (CV-374A) by Tokyo Sokushin, post processing PC for data storage and power supply unit. The Network Sensor

Report for fiscal 1995 by basic liquefaction technology subcommittee; 1995 nendo ekika kiban gijutsu bukai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Delivered at the 1st meeting are a report on the fiscal 1995 research plan and an interim report, involving the use of coal-derived oils, research on refining technology using a PDU (process developing unit), reforming technology and petroleum blending technology for coal-derived oils, development of new reforming catalysts, technology of heterocompound separation, and the development of applications. Reported in relation with the development of environmentally friendly coal liquefaction technology are the study of coal liquefaction conditions, study of the upgrading of basic liquefaction techniques for the improvement and rationalization of the liquefaction process, and a project of liquefaction technology internationalization. A report is also given on a liquefaction catalyst study meeting. At the 2nd meeting, reports are delivered on the development of environmentally friendly coal liquefaction technology, including a briefing on the situation in general, designing of highly active catalysts, elucidation of the mechanism of emergence of activity, achievement of the marginal yield of coal-derived oils, and the properties of catalyst attached to coal. Delivered in relation with the use of coal-derived oils and technology for their refining are a briefing on the situation in general and reports on the blockup to occur in the naphtha fraction process and measures to counter the problem, control of the metamorphosis of active metals in reaction, heterocompound separation technology, and the development of applications. (NEDO)

Project to promote exchange of international information on environmental technologies; Kankyo gijutsu kokusai joho koryu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Mutual information exchange at international levels is important for practical application of global environment preservation technologies, whereas the APEC Virtual Center was established in fiscal 1997. Fiscal 1998 has discussed the future functions of the Virtual Center, and carried out the following matters to improve the functions and achieve its stable operation. Discussions were given on common use with the centers of other countries and regions of the specifications of classification systems for information areas and provided information that are provided by the Virtual Center. Visits were made to sub-managing countries and regions for smooth operation of the study groups, and opinions were exchanged. Visits were made to coordinators and contact points established in each country and region when the Center was founded in fiscal 1997. A visit was made to the U.S. Environmental Protection Agency to exchange opinions on coordination measures with the Cleaner Production Strategy of the U.S.A. being a project similar to the subject project. In order to strengthen the Japan's Center, attempts were made to expand the linking information to wider scope. Special pages publishing concentratedly the items of information that the users are interested were prepared as part of the information provision. (NEDO)

Annual view (1999) - aeronautic relation/space relation. Aeronautic relation - flight preparation; Nenkan tenbo (1999) koku kankei uchu kankei. Unko seibi kanren

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-05

The year of 1999 to airline companies was exactly a year when they had to tackle the Y2K issue all the time with no introduction of new model planes. For the purpose of much appealing for aeronautical safety, the government and private companies jointly made a demonstration flight simulating the shift to a new year in September. The persons concerned in the Civil Aviation Bureau, the Ministry of Transport, mass communication, and airline companies were on the flight. The demonstration flight was finished with no big troubles. The standard weight of passengers, etc. which is used for weight/gravity center position management of airliners was to be newly set. Following the domestic line in 1998, the standard weight of the international line was set in 1999. As a new flight system, RVSM flight is planned to be started in the Pacific air area in February 2000. In the RVSM flight, airplane is flown by shortening vertical control intervals from 2000ft to 1000ft at the altitude between 29,000ft and 41,000ft. In 1999, domestic airline companies decided on no smoking at all the seats in both the domestic line and international line. (NEDO)

Preparation of the FY 1998 photovoltaic power system related technology information; 1998 nendo taiyoko hatsuden system kanren gijutsu joho no seibi

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The paper outlined the FY 1998 data preparation project on the photovoltaic power generation. In the field of solar cells and photovoltaic power system, a part of the 13th EUPVSEC data and the 25th IEEEPVSEC data are made database. As to the NEDO related papers, the papers made public in FY 1998 are made database. The number of the object papers totaled 982 including 943 in international conference relation and 39 in NEDO relation. The number of the papers included in 'photovoltaic power generation database (literature)' totaled 4010. Steps of database preparation are collection of the research papers/various reports made public in Japan and overseas, abstract making, preparation of the result data/experimental data, keyword supply, classification/adjustment, and description items. The FY 1998 is the fifth year from the start of this database, and the collected/adjusted technical information on solar cells is classified for analysis according to international conference, research institute, used material, research field, etc. (NEDO)

Preparation of the FY 1998 photovoltaic power system related technology information; 1998 nendo taiyoko hatsuden system kanren gijutsu joho no seibi

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The paper outlined the FY 1998 data preparation project on the photovoltaic power generation. In the field of solar cells and photovoltaic power system, a part of the 13th EUPVSEC data and the 25th IEEEPVSEC data are made database. As to the NEDO related papers, the papers made public in FY 1998 are made database. The number of the object papers totaled 982 including 943 in international conference relation and 39 in NEDO relation. The number of the papers included in 'photovoltaic power generation database (literature)' totaled 4010. Steps of database preparation are collection of the research papers/various reports made public in Japan and overseas, abstract making, preparation of the result data/experimental data, keyword supply, classification/adjustment, and description items. The FY 1998 is the fifth year from the start of this database, and the collected/adjusted technical information on solar cells is classified for analysis according to international conference, research institute, used material, research field, etc. (NEDO)

FY1995 basic research for neuroactive materials; 1995 nendo shinkei kino zairyo kaihatsu ni kansuru kiban kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Development of nenroactive materials to improve neuronal defects is one of the most important subjects in Japan that will soon become a aging society. In this project, basic research for neuroactive molecule was performed to develop technology for neuronal regeneration, regulation of synaptic activity and interface between artificial surface and living neurons. A novel neurite promoting factor was discovered and its cDNA was cloned. Mutagenesis in vitro showed that a functional region of this factor located in a polypeptide of less than 50 aminoacids. Using neuronal culture, synapse formation was found to depend on two modes of activities and long-lasting synaptic potentiation was demonstrated to depend on a macromolecules released from pre- or postsynaptic neurons. To regulate nervous activities, photoactivated caged-peptide was developed and confirmed to change in affinity to its receptor. Neurons were cultured on substrates paterned by microlithography. (NEDO)

Investigation into introduction and promotion of clean energy cars; Clean energy jidosha no donyu sokushin ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Gazing the introduction target for fiscal 2000 and 2010, the paper arranged comprehensively and systematically the trend in Japan and overseas of clean energy cars and described subjects. Themes of the study to be promoted in terms of electric cars are: Li secondary batteries, heightening of performance of batteries such as Ni-hydrogen, power generation/power storage hybridization to make the long-distance travel possible. For the price reduction, the body is so made as to make it possible to select three kinds of power unit, that is, gasoline, hybrid, and electricity. Low noise and easy operation are also important. As to natural gas vehicles, the price is more than three times as high as that of gasoline vehicles, and relaxation of the related regulations on metal tanks, the Road Traffic Act, etc. is necessary. It is indispensable to establish quantity production and technical standards and reduce cost by the remodeling for bi-fueling with gasoline engines, development of FRP tanks, etc. Methanol vehicles are the closest to gasoline vehicles, but the introduction is delayed having no groups for generalization. Solar and hydrogen cars are promising, but are on a stage of developing the basic technology. 43 figs., 104 tabs.

Report on achievements in fiscal 1998. Research on acceleration of improving the base for biological resource information, and development of a technology to measure gene information (development of the DNA measuring technology using bead arrays); 1998 nendo seibutsu shigen joho kiban seibi kasokuka kenkyu idenshi joho no keisoku gijutsu no kaihatsu seika hokokusho. Bizu array wo mochiita DNA keisoku gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

It is necessary in the field of post-genoms to know statistical correlation between DNA orientation information and clinical data, which helped growth of DNA probe arrays (DNA chips). However, it is difficult in patent point of view to develop chips in Japan. On the other hand, a movement has begun to use beads fixed with DNA probes in place of DNA chips demarcated on the surface of solids. This is a method to investigate hybridized DNA by means of fluorescent detection, in which each bead retaining the DNA probes is colored to make identification of the retained probes possible, and hybridizing reaction is performed in aqueous solution. Hitachi has developed a DNA measuring technology using bead arrays. The bead array has probe fixing beads of about 100 {mu} m laid sequentially inside a capillary, wherein the array can be used to inspect a large number of genes. Thus, this method can be a DNA measuring technology which is inexpensive, and high in reproducibility. These features lead to a belief that the technology is suitable for gene inspection devices used in the process of medicine development and at the clinical sites. (NEDO)

Report on surveys in fiscal 2000 on the survey on foundation to establish industrial technology strategy. Survey on hyper-intellectual-IT infrastructure; 2000 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kodo chiteki joho gijutsu kiban (Hyper-Intellectual-IT Infrastructure) chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As a result of rapid proliferation of the Internet and the use of broadband in networks, it is anticipated that design, manufacture, and research will be performed with a large number of simulators and databases dispersed on the networks working in coordination. Therefore, surveys have been carried out on the current status of computer utilizing methods, the current status of data expressing methods, the current status of the network dispersion environment, the current status of simulators, and the current status of the software calculation services. Functions to be possessed by the hypothetical cooperation type research, design and manufacturing environments were extracted, and so were the problems in the current situation. Indicated as the most important assignment were the extraction of the data exchanging common platform and the functions thereof, the extraction of fee charging and security mechanisms, and the problems in the intellectual properties and the protection thereof. Further enumerated as the important assignment were unification and integration of the measures taken by the government, improvement in the basic hardware environment, establishment of the software structuring policies, and listening to opinions from wide areas on software, OS, and data structure. (NEDO)

Report for fiscal 1994 by subcommittee on coal liquefaction basic technology; 1994 nendo ekika kiban gijutsu bukai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

This report covers the proceedings of subcommittee meetings. Using PDUs (process development unit), comparison is made between bituminous coal-derived oils (150t/d plant for the Indonesian coal) and brown coal-derived oils (50t/d plant for the Yallourn coal), product quality is improved by a 2-stage refining process, engines are tested, etc., all these demonstration and research efforts intended to win social recognition for coal liquefaction products. Among basic studies, there are the development of technologies for reforming coal-derived oils and for mixing them will petroleum, development of new catalysts for reforming, development of a technology for separating heterocompounds and the like, and the development of their applications. Furthermore, technologies are developed for environmentally friendly coal liquefaction, feasibility of coal liquefaction technology internationalization is deliberated, and technical researches and joint researches are conducted. At the second meeting of the subcommittee, achievements relative to the refining and applications of liquefaction products are presented, including the hydrorefining of naphtha, heating oil, and light oil; development of new catalysts; heterocompound separation technology; and the development of new applications. In relation with the development of environmentally friendly coal liquefaction technologies, studies are presented on liquefaction conditions and on the upgrading of basic technologies of liquefaction. Also referred to are the reports delivered at a meeting on liquefaction catalysts (January 1995). (NEDO)

Report on investigation in fiscal 2000 related to improving APEC industrial technology indicators; 2000 nendo APEC sangyo gijutsu indicator seibi kanren chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to strengthen cooperation in the research and development field in the APEC areas, a database was structured on such data as research and development assistance institutions in each country, research and development budgets, human resources for research and development, such governmental regulations as research visa issuing procedure and foreign capital control, research and development trends in private business entities, major research and development organizations, and evaluation on research and development environment in private business entities. The introduction of the report describes the background of the investigation, and factors for internationalization of research and development. Trends were investigated on research and development in the eight nations; the Philippines, Thailand, Korea, China, Singapore, Taiwan and Malaysia. Specifically, investigations were made in China on the research and development statistics, research and development programs, investment trends, small to medium business entities, promotion of research and development, the result of the 1999 APEC investigation, computer software, computer net services, and electronic trading (e-commerce). In the Philippines, six items were investigated, such as the economy trends and prospects, the result of the 1999 APEC investigation, case studies, and small to medium business entities. (NEDO)

Survey report for fiscal 1999 on foundation of strategy formation for industrial technologies. Strategy of foundation and environment buildup (Further into support for technological innovation); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo senryaku gijutsu kakushin shien shisaku shinkutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Surveyed are the roles of the government, important for environmental buildup for technological innovation. The U.S. research and development support programs are classed into contracts, grants, cooperative agreements, and CRADAs (Cooperative Research and Development Agreements). The government financially supports the first three, but not CRADA. It provides CRADA with manpower, facilities, and resources. The research and development (R-and-D) appropriation not for national defense in the U.S. fiscal 2000 budget is up 36% to $39.4 billion occupying 50.6% of the total R-and-D expense. The basic research appropriation is given the highest priority, enjoying an increase of 4.7% to $18.1 billion. In the U.S., taxation for R-and-D expenses is done in two ways. One is a research expense tax deduction system under which R-and-D expense is handled as a cost, a subject of deduction. The other is a research and experiment tax deduction system under which a certain percentage of R-and-D increment is free of taxation. NEDO's (New Energy and Industrial Technology Development Organization) system for national R-and-D projects is scheduled to change extensively upon reorganization of the government ministries and agencies in January, 2001. Under the circumstances, the current and future systems of the state supports for R-and-D are outlined, and the position of NEDO in them is clarified. The R-and-D systems of the entrusted businesses and the problems they contain are also described. (NEDO)

Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Comprehensive survey); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (sogo chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Surveys and studies were conducted to facilitate and invigorate research, development, and economic activities and to provide technology related intellectual assets in an organized, systematic way. In the survey related to the buildup of intellectual infrastructures, questionnaires were sent to 789 organizations in the industrial and academic domains concerning measuring standards, reference materials, base for information on biological resources, base for safety management of chemical substances, base relating to human life and welfare, and base of knowledge relating to materials. On-site surveys were also conducted in Asia, Australia, North America, and Europe. Concerning 10 inorganic reference solutions whose development is urged because they are related to environments, raw materials for them were selected, required purity levels were defined, and methods for measurement and evaluation of safety when in prolonged preservation were investigated. Conducted in the research and development of individual subjects were database buildup on thermophysical properties, research into long-term durability of heat-resistant composite materials, research into textural structure and characteristics as materials of sintered bodies of fine ceramics, database buildup on the safety of non-ferrous metals, studies of base of human characteristics measurement, and the like. (NEDO)

Report on the achievements in fiscal 1999. Research and development on a basic technology to apply superconductivity (Research and development on a basic technology to apply superconductivity); 1999 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Chodendo oyo kiban gijutsu kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

The development of a basic technology to improve superconductivity characteristics has performed (1) studies on the high-temperature superconductivity mechanism, (2) studies on the critical current mechanism, and (3) search for materials. In Item (1), composition and temperature dependence were investigated by measuring superconductivity gap and change in the electron state of pseudo gap using photo-electron spectra and Raman scattering spectra. In Item (2), magnetic flux behavior in the vicinity of the irreversible line was investigated on magnetic flux dynamics of Bi2212 by measuring magnetic resistance and magnetization. High viscosity condition having strong magnetic flux liquid zone was discovered. In Item (3), Sr was used in place of Ba as the constituting element, and several new mercury-based superconductors were synthesized successfully by using the high pressure synthesizing method. In developing superconductive bulk materials and wire materials, elucidation was given on (1) an element technology for high magnetic power bulk materials, (2) an element technology for high critical temperature bulk materials, (3) a fundamental technology for manufacturing next generation wire materials, (4) a fundamental technology for manufacturing next generation large current conductors, and (5) growth mechanism in wire material crystals. Development of laminating and processing technologies for superconductive materials has worked on (1) a single crystal substrate technology, (2) a thin film lamination technology, (3) a standard bonding technology, (4) an advanced bonding technology, and (5) a thin film and bond evaluation technology. (NEDO)

Fiscal 2000 pioneering research on the spintronic device basic technology; 2000 nendo spintronic soshi kiban gijutsu sendo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Researchers specializing in technologies of magnetism or semiconductor were drafted from the industrial, official, and academic circles, who conducted hearings, patent investigations, overseas surveys, and the like, concerning spintronics. Collected in this report are the outline of the research and development of spintronic device technology, its current state and tasks and its importance from social and economic viewpoints, and the strategy that Japan should follow in the research and development of the technology. Important spintronic device technologies now attracting attention are mentioned below. The nonvolatile magnetic memory device MRAM (magnetic random access memory) is supposed to be the device which will enjoy practical application first among like devices. It is expected that the spin conduction device will lead to novel functions when the possibilities of the spin-dependent electric conduction phenomenon are further pursued. It is hoped that the spin optical device will be used as a light isolator, light spin logic device, field induced variable wavelength laser device, spin laser device, high-speed light switch, and so forth. It is necessary to watch the development of a spin-aided quantum computer which is still at the stage of basic study. (NEDO)

Microalgal biotechnologies for recycling of pollutants; Tayona sorui kino wo kiban to suru seibutsuken busshitsu junkangata sogo saishigenka gijutsu

Energy Technology Data Exchange (ETDEWEB)

Miyamoto, K; Nasu, M; Hashimoto, C; Tanaka, K; Hirata, M [Osaka University, Osaka (Japan). Faculty of Pharmaceutial Science; Fujita, M; Takagi, M [Osaka University, Osaka (Japan). Faculty of Engineering; Hirata, Y; Taya, M [Osaka University, Osaka (Japan). Faculty of Engineering Science; Yamanishi, H [Osaka University, Osaka (Japan). Faculty of Medicine

1997-02-01

This paper describes the technology development by which biomass is produced by treatment of pollutants using microalgae, and is recycled. A bioreactor system has been developed, in which microalgal biomass can be obtained through the effective treatment of CO2 and NOx using microalgae having ability of increase under the severe condition with simultaneous flow of CO2 and NOx. A new method has been also developed for separating and recovering the microalgae. Materials, such as glucose, glycerol, acetic acid, and lactic acid, were produced from the obtained biomass through physico-chemical and biological treatments. These materials can be converted into ethanol and hydrogen. For this treatment and recycling system, functions as a part of natural material recycling were considered to be most significant. Development of an analysis and evaluation method of an impact of this system on the natural environment is also tried. 1 fig.

Preparation of meteorological data (METPV) which is useful to simulate output from PV systems; Taiyoko hatsuden system no simulation yo data METPV no seibi

Energy Technology Data Exchange (ETDEWEB)

Itagaki, A; Iida, H [Japan Weather Association, Tokyo (Japan)

1996-10-27

Studies are under way for the nation-wide buildup of a network of METPV data, new standard meteorological data resembling the HASP data, for the time-based simulation of the output of photovoltaic power generation systems. There is a method of preparing hourly data covering a long period of time for computer processing for the determination of the average hourly power generation level, which, however, will be unrealistic because of the enormity of calculation work involved. Hence: the concept of standardized meteorological data, which involves the specification of typical years after examining the data covering a long period and the preparation of the data of the years for computer processing. In the METPV setup, three types of data are prepared: data for the year of the average insolation, data for the year of insufficient insolation, and data for the year of excess insolation. Next, for each of the twelve months, the year of the average insolation is found. When the twelve pieces of data for the twelve months (of different years) are combined, an artificially constructed year results, with each of the twelve months having the average insolation. A technique has been developed for smoothing the discontinuity between the months. Forty observation spots were built in fiscal 1995, and 150 spots will have been prepared across the country by the end of fiscal 1996. 6 refs., 4 figs.

Fiscal 1995 geothermal development promotion survey. Natural environment survey report; 1995 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

In Candidate C area for the geothermal development survey, the natural environment was surveyed and `the secondary landscape assessment` was summed up in which places proposed for drilling of large-size wells and for construction of power generation facilities are extracted and a simulation of the landscape is conducted. The area for survey is the Shiramizu-gawa region in the south of Lake Akan, Akan-cho, Akan-gun, Hokkaido. The field survey was carried out about three items of landscape, plants and animals during the June-November period, 1995. As to the flora, diverse florae including vegetation unique to alpine areas, wetlands, and fumarole surrounding areas were found in the region, which is covered with summer-green broad-leaved forests or mixed forests of coniferous and broad-leaved trees. As to the fauna, faunae inhabitant of the highly natural forests were found including black woodpeckers and mountain hawk eagles. As a result of studying the places proposed for geothermal development from the above-mentioned survey, two places were picked up in the west of the survey area, where geothermal development is comparatively less influential in the natural environment and landscape and there is a high locational adaptability. 19 refs., 56 figs., 49 tabs.

Geothermal development promotion survey report. No. 26. Akan region; 1988-1991 chinetsu kaihatsu sokushin chosa hokokusho. No. 26 Akan chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-01

The results of surveys conducted in the Akan region, Hokkaido, in fiscal 1988-1990 are compiled in this report. Conducted were a geological/alteration zone survey, geochemical survey, gravity prospecting, electromagnetic surveillance (simplified magnetotelluric method), electric prospecting (Schlumberger method), electric prospecting (mise-a-la-masse method), heat flow rate survey, test boring, geothermal water survey, environmental impact survey, and so forth. The surveys resulted in conclusions mentioned below. Fractures running NE-SW are dominant, and those closely related to prominent geothermal signs are found in the Akan Seibu fault group in the western part of the Akan region. The test boring results show that there are high-temperature zones of 292.1 degrees C, 194.9 degrees C, and 245.9 degrees C. Geothermal fluids were discharged by well N2-AK-7 at a rate of 4.7-4.8 t/h in steam and 0.3-0.4 t/h in neutral SO{sub 4}-HCO{sub 3} type geothermal water. High-temperature steam-dominated geothermal resources are expected to exist deep in the ground in this region, and the area where the Akan Seibu fault group is distributed may be named as a location containing promising geothermal resources. (NEDO)

Geothermal development promotion survey. No. B-3 Kumaishi area; Chinethu kaihatsu sokushin chosa seika hokokusho. No. B-3. Kumaishi chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This paper summarizes the result of a geothermal resource survey carried out from fiscal 1995 through fiscal 1997 in the Kumaishi Area located in the western center of Oshima Peninsula in the south western part of Hokkaido. The survey for this area was performed with an objective to search the spread of high temperature area continuing from the adjoining Yakumo area where the highest temperature of 233 degrees C has been confirmed in a structural test well (N63-YK-6), to identify high water permeating areas in great depth points underground, and to find possibility of existence of geothermal resources. The survey included geological and alteration zone survey, geochemical survey, gravitation exploration, electromagnetic exploration, drilling and temperature logging of five structural test wells, water injection test, temperature restoration test, core survey and hot water survey. Also performed were environmental effect survey, rock age measurement, alteration age measurement, and fluid inclusion test. As a result of the survey, it was identified that the verified geothermal hot water has been stored in granites with poor water permeability, whose low temperature has not formed convection systems spreading in wide areas despite having been heated, making each system exist in small scale independently. It was estimated that the possibility is low to expect geothermal power generation. (NEDO)

Geothermal development promotion survey report. No. 25. Hishikari region; 1987-1989 chinetsu kaihatsu sokushin chosa hokokusho. No. 22 Hishikari chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-03-01

The results of surveys conducted in the Hishikari region, Kagoshima Prefecture, in fiscal 1987-1989 are compiled in this report. Conducted were a geological/alteration zone survey, geochemical survey, electric prospecting, electromagnetic surveillance, gravity prospecting, heat flow rate survey, test boring, environmental impact survey, and so forth. The surveys resulted in conclusions mentioned below. According to the underground temperature distribution based on the results of the heat flow rate survey, test boring, and so forth, temperature is low at the western part of the Hishikari region where there is a low gravity anomaly and high in the zone in the ENE-WSW direction where there is a high gravity anomaly. The present ground temperature is lower than the fluid inclusion homogenization temperature by approximately 120-140 degrees C. It is deduced that the geothermal water reservoir lies in the Quatenary volcanic rocks or in a fracture zone that develops in the Shimanto supergroup. It is inferred that the geothermal water producing the hot spring water all originates in meteoric water staying long in the ground. It is also inferred that volcanic gas or the like contributes but a little to the formation of the geothermal system but that the contribution is great of the heat supplied from the magma pool. (NEDO)

Geothermal development promotion survey report. No. 22. Noboribetsu region; 1987-1990 chinetsu kaihatsu sokushin chosa hokokusho. No. 22 Noboribetsu chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

The results of surveys conducted in the Noboribetsu region, Hokkaido, in fiscal 1987-1989 are compiled in this report. Conducted in the surveys were a geological/alteration zone survey, geochemical survey, electromagnetic surveillance (simplified magnetotelluric method), electric prospecting (Schlumberger method), electric prospecting (mise-a-la-masse method), heat flow rate survey, structural boring, precision structural boring, environmental exploration well, geothermal water survey, environmental impact survey, and so forth. Conclusions reached on the basis of the survey results are described below. It is supposed that a horizon, positioned in the Osarugawa stratum in the Karls Noboribetsu zone or in a fissure system in the Omagarisawa stratum below the Osarugawa stratum, contains a geothermal reservoir. The hot water at the Noboribetsu hot spring originates in gas or geothermal water separated from the deep-seated geothermal water while that at the Karls hot spring or the like originates in meteoric water built up in higher places. Although an area abundant in geothermal fluids is supposed to exist in the Karls-Noboribetsu zone, yet a section located between the Karls-Noboribetsu zone and the Noboribetsu hot spring area also draws attention as a zone having a potential to store geothermal fluids. (NEDO)

Basic survey on a potentiality of energy-related cooperation in Vietnam; Betonamu ni okeru energy kanren kyoryoku kanosei kiban chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The paper reports trends of energy, economy, and the environmental field in Vietnam. The economy of Vietnam has indicated a powerful growth in all the sectors for the first nine months of fiscal 1994. The amount of industrial products showed a growth of 12.2%, and the agriculture is supported by a growth in cash crop, despite of the damage to rice growing caused by the flood. The government announced that they expected a GDP growth rate of 8.5% in fiscal 1994 over the target of 8%. However, a hope that the government wants the inflation rate not exceeding 10% was already given up in October. The government holds a financial deficit totaling 636 million dollars. The government planned to supplement the deficit partially by increasing revenue and partially by support from overseas, but in both cases the fund was short. The trend in the finance/bank sector since August indicates that the money market is appearing. Vietnam established the foreign currency interbank market. Moreover, the government decided on establishment of the stock market up to the beginning of 1995.

Basic research program for innovated coal utilization in Japan. BRAIN-C program; Sekitan riyo kiban gijutsu kaihatsu. BRAIN-C program

Energy Technology Data Exchange (ETDEWEB)

Harada, M [Center for Coal Utilization, Japan, Tokyo (Japan)

1996-09-01

This paper introduces the circumstances and purpose of establishing the Basic Research Associate for Innovated Coal Utilization (BRAIN-C) Program started in October 1995, and the summary of the results therefrom in fiscal 1995. Although development of coal utilization technologies has been implemented over a number of years, there are many problems still requiring solutions. Early realization has been urged on diversification of coal utilization, acceleration of technological development and diversification of coal types. In order to achieve these goals, the necessity was recognized afresh on not only the hardwares, but also on basic technologies in terms of software which can identify properties of coals, systematize different reactions, and estimate reactions, fluidity and heat transmission of coals. Therefore, receiving a subsidy from the Agency of Natural Resources and Energy of the Ministry of International Trade and Industry, a research and development program to be implemented jointly by industries, administrative agencies and academic societies had been started with a five-year plan for the time being. With the activities for the program such as collecting 50 to 100 types of coals and supplying them to researchers, the program had been accelerated in fiscal 1995 on a large number of themes and results therefrom, including fundamental properties and thermo-chemical reactions. 2 figs., 4 tabs.

Report on the geothermal development promotion survey. No.36. Mt. Amemasudake area; Chinetsu kaihatsu sokushin chosa hokokusho. No. 36 Amemasudake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The paper summed up the results of the geothermal development promotion survey 'Mt. Amemasudake area' which was carried out at Akaigawa village, Yoichi county, Hokkaido, from FY 1991 to FY 1994. In the survey, the following were conducted for the comprehensive analysis: surface survey such as geology/alteration zone survey, geochemical survey, gravity exploration, electromagnetic exploration and electric exploration, core test by drilling 5 boreholes, test to induce jetting of geothermal fluids, measurement of in-borehole temperature/pressure, survey of geochemical properties of geothermal water. As to the fracture system in this area, the Amemasudake fault and the Amemasuzawa fault are especially important, and it was assumed that these faults had relation to the present geothermal distribution. It is thought that structural conditions of geothermal reservoirs are fractures in basement rocks. As a result of the borehole survey, it was indicated that the center of the high-temperature part with a temperature of 250 degrees C or more was in the boundary zone southeast of this area at a level of 500m below sea level. The scale, which reached about 3km both in east/west and north/south, is almost the same scale as that of the neighboring Toyoha area where great potentiality of the geothermal development is expected. (NEDO)

Report on the geothermal development promotion survey. No.36. Mt. Amemasudake area; Chinetsu kaihatsu sokushin chosa hokokusho. No. 36 Amemasudake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The paper summed up the results of the geothermal development promotion survey 'Mt. Amemasudake area' which was carried out at Akaigawa village, Yoichi county, Hokkaido, from FY 1991 to FY 1994. In the survey, the following were conducted for the comprehensive analysis: surface survey such as geology/alteration zone survey, geochemical survey, gravity exploration, electromagnetic exploration and electric exploration, core test by drilling 5 boreholes, test to induce jetting of geothermal fluids, measurement of in-borehole temperature/pressure, survey of geochemical properties of geothermal water. As to the fracture system in this area, the Amemasudake fault and the Amemasuzawa fault are especially important, and it was assumed that these faults had relation to the present geothermal distribution. It is thought that structural conditions of geothermal reservoirs are fractures in basement rocks. As a result of the borehole survey, it was indicated that the center of the high-temperature part with a temperature of 250 degrees C or more was in the boundary zone southeast of this area at a level of 500m below sea level. The scale, which reached about 3km both in east/west and north/south, is almost the same scale as that of the neighboring Toyoha area where great potentiality of the geothermal development is expected. (NEDO)

FY 1991 report on the survey of geothermal development promotion. Electromagnetic exploration (High accuracy MT method) (No.38 - West area of Mt. Aso); Chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. 1991 nendo chinetsu kaihatsu sokushin chosa - Denji tansa (Koseido MT ho) hokokusho (No.38 Asosan seibu chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-01

As a part of the survey of geothermal development promotion in FY 1991, electromagnetic exploration by the high accuracy MT method was conducted to acquire the information on the geothermal structure in the west area of Mt. Aso, Kumamoto Prefecture. The electromagnetic exploration was made in the area of about 65km{sup 2} at 52 measuring points for 3 measuring components in the magnetic field/2 measuring components in the electric field at 20 measuring frequencies or more in the range of 0.01Hz-20kHz for 4 hours or more. As a result of the survey, the resistivity structure indicated a 3-layer structure inside the Aso caldera. It was thought that the lowest layer was correspondent to the geological basement (Pre-tertiary system). As to the resistivity discontinuous lines extracted from sudden changes in depth distribution and resistivity distribution of the resistivity basement, those in NS direction are conspicuous and those in EW direction also exist inside the caldera. Around the part where these resistivity discontinuous lines of both NS and EW systems cross each other inside the caldera, the Yunoya hot spring and Tarutama hot spring which indicate the geothermal manifestation are located, and acid alteration zones were seen on the earth's surface in the periphery. (NEDO)

Achievement report for fiscal 2000 on research and development of key technologies for superconducting generator. Research and development of key technologies to increase density, research and development of key technologies to increase capacity, research and development of design technologies, and research of technologies; 2000 nendo chodendo hatsudenki kiban gijutsu kenkyu kaihatsu seika hokokusho. Komitsudoka kiban gijutsu no kenkyu kaihatsu / daiyoryoka kiban gijutsu no kenkyu kaihatsu / sekkei gijutsu no kenkyu kaihatsu / gijutsu chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Researches have been made to increase density of 200,000-kW class generator and to increase capacity of 600,000-kW class generator necessary for putting superconducting generator into practical use. This paper summarizes the achievements in fiscal 2000. In the study of increasing densities of superconductors and field windings, strands were fabricated, in which aging heat treatment conditions, number of aging, and processing degrees between each aging were varied, to increase the critical current of Nb-Ti strand, wherein as high critical current as corresponding to about 90% of the target was obtained. Possibility of increasing the critical current with the final processing degree in the range of 4 to 5 was verified from the relationship between the final processing degree and the critical current. In the study of increasing capacities of superconductors and field windings, findings were acquired on enhancement of conductor stability and reduction in AC loss, with regard to superconductor strands well balanced in the two elements. Prospects were obtained in achieving the AC loss of 200 kW/m{sup 3} in the targeted superconductor. The residual resistance ratio was found to be 200, showing sufficiently high value, and sufficient function was verified in the stabilized copper. In the research of design technologies, primary basic design was performed. (NEDO)

Leading research report for fiscal 1999. Fundamental technology of spin electronic device; 1999 nendo spin toronikusu soshi kiban gijutsu kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The project, with attention paid to both spin and charge of electrons, aims to draw the best of the said two attributes of electrons by use of the state of the art in manufacturing technology for the creation of novel electronic devices. The nonvolatile MRAM (magnetic random access memory), which is the nearest to commercialization, is a tunnel device consisting of two sheet-shape ferromagnetic metal electrodes and an insulator film sandwiched between the said two electrodes, with the lower electrode magnetized only in one direction. The tunnel resistance changes when the magnetization direction in the upper electrode changes left and right (1, 0) according to an external writing magnetic field, and this enables nondestructive readout. The upper electrode magnetization direction remains unchanged thanks to hysteresis when the external writing magnetic field is turned off, and this allows the device to serve as a nonvolatile memory device. The device has a potential for higher speeds and enhanced integration. Much is also expected from a spin conduction functional device utilizing spin-dependent electric conduction, spin optical function device, spin quantum calculation directly utilizing quantum state, magnetic field sensor, etc. Their importance is great economically and socially, and technologies relating to magnetism and semiconductor should be merged for their further development. (NEDO)

Report on the geothermal development promotion survey. No.B-7. Kuwanosawa area; Chinetsu kaihatsu sokushin chosa hokokusho. No. B-7 Kuwanosawa chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

The paper summed up the results of the geothermal development promotion survey B 'Kuwanosawa area' which was carried out in Yuzawa city, Akita prefecture, from FY 1998 to FY 1999. In the survey, the following were conducted for the comprehensive analysis: geology/alteration zone survey, gravity exploration, electromagnetic exploration, environmental effect survey, well geology survey by drilling structural boreholes of N11-KN-1 and N12-KN-2, cuttings test, temperature log, temperature recovery test, electrical log, water injection test, etc. The geology in the Kuwanosawa area is composed of Pre-neogene period basement rocks, Neogene system and Quaternary system. In this area, there were recognized no gush of geothermal fluids such as hot spring and fumarolic gas and no obvious geothermal manifestation such as high-temperature places and new geothermal alteration zones. Around N12-KN-2, there exists the geothermal water with comparatively high-temperature/high-Cl concentration which is similar to that in the Wasabizawa area, but how it flows is unknown because there was no lost circulation in the depths of the borehole. Around N11-KN-1, there exists the low-temperature/low-Cl concentration geothermal water originating in meteoric water, and therefore, the area can be a rechargeable area. The Kuwanosawa area is regarded as the periphery of the Wasabizawa-Akinomiya geothermal area. (NEDO)

Report on the geothermal development promotion survey. No.34. Kaminoyu/Santai area; Chinetsu kaihatsu sokushin chosa hokokusho. No. 34 Kaminoyu Santai chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The paper summed up the results of the geothermal development promotion survey 'Kaminoyu/Santai area' which was carried out at Yakumo town, Yamakoshi county, and Mori town, Kayabe county, Hokkaido, from FY 1990 to FY 1992. In the survey, the following were conducted for the comprehensive analysis: surface survey such as geology/alteration zone survey, geochemical survey and gravity exploration, test to induce jetting of geothermal fluids by drilling 7 boreholes, temperature/pressure log, etc. The geological structure of this area is featured by the uplift structure/caldera structure and the anticline structure. In the wide-area geothermal system, it is thought that the low-temperature seawater permeates underground by mixture with meteoric water, is heated, and forms the deep geothermal water. It is thought that the hot spring water in this area is stored in the hot spring reservoir by mixture with the surface water, and it is gushing. In the area, the region which is regarded as favorable as passage/storage place of geothermal fluid is a region of 1.5km width extending linearly in the E-W direction from the Nigorikawa basin to Kaminoyu. Further, it is thought that fractures were unfavorably developed in the Santai/Kaminoyu area. (NEDO)

FY 1995 annual report on the project for promoting development of superhigh electronic techniques; 1995 nendo chosentan denshi gijutsu kaihatsu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-05-01

Described herein are the FY 1995 results of the R and D project for developing superfine machining process techniques, measurement/analysis/controlling techniques for extreme conditions, and techniques for electronic materials of new functions, in order to establish the superhigh electronic techniques of two generations beyond. The project is implemented, mainly for the following targets: direct image drawing systems with electron beams by R and D of the techniques for electro-optical systems and superhigh-accuracy controlling techniques therefor; patterning systems with supershort-wavelength electro-magnetic waves by R and D of techniques for X-ray optical systems, superhigh-accuracy controlling techniques therefor and photosensitive process techniques; superfine photosensitive techniques with ultrashort-wavelength laser beams; techniques for superhigh-accuracy light-shielding systems; superhigh techniques for measurement/analysis/controlling of plasma reactions as the bases for plasma-aided superthin film making and superfine etching; basic techniques for superhigh cleaning; techniques for superhigh-sensitivity media; techniques for elements of new functions and making thin films thereof; and techniques for electronic materials of new functions. (NEDO)

Report on the geothermal development promotion survey. No.C-3. Akinomiya area; Chinetsu kaihatsu sokushin chosa hokokusho. No.C-3 Akinomiya chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper summed up the results of the survey of the geothermal development promotion survey - Akinomiya area which was carried out in Yuzawa City and Ogachi Town, Akita Prefecture, from FY 1996 to FY 1999. In the survey, the following were conducted: surface survey such as the geological alteration zone survey, fluid geochemical survey, gravity survey and electromagnetic exploration, logging by drilling 8 boreholes, jetting test, etc. Further, using the data obtained from these, analysis was made of geology/reservoir structure, thermal structure, hydraulic structure, etc. As a result, grasped were the distribution of the main underground fracture structure and the distribution of promising high-temperature zones. In the short-term/long-term jetting test, a total steam amount of 124 t/h was confirmed. Moreover, there was the pressure interference between the geothermal reservoir in the Akinomiya area and the geothermal reservoir in the Wasabizawa area, and it was confirmed that there was the hydraulic relation between those reservoirs. Further, it was assumed that there was not so much effect on hot spring reservoirs in the Akinomiya area. In the simulation of production prediction, the result was obtained that there was a possibility of power generation of 30MW only in the Akinomiya area and of 60MW both in the Akinomiya area and the Wasabizawa area. (NEDO)

Report on the geothermal development promotion survey. No.C-2. Wasabizawa area; Chinetsu kaihatsu sokushin chosa hokokusho. No.C-2 Wasabizawa chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper summed up the results of the survey of the geothermal development promotion survey - Wasabizawa area which was carried out in Yuzawa City and Ogachi Town, Akita Prefecture, from FY 1993 to FY 1996. In the survey, the following were conducted: surface survey such as geological alteration zone survey, fluid geochemical survey, gravity survey and electromagnetic exploration, temperature log by drilling 9 exploration wells, short-term/long-term jetting test, etc. Further, using the data obtained from these, analysis was made of geology/reservoir structure, thermal structure, geothermal water/hydraulic structure, geothermal system models, etc. As a result, a high-temperature (about 300 degrees C) zone promising as the geothermal development area was picked out, and the existence was confirmed of a dominant geothermal reservoir around the fault. In the jetting test, a total steam amount of 111.6 t/h was confirmed, and from the reservoir simulation, the result was obtained that there was a high possibility of 30-year power generation of 30MW/y. As a result of studying 'a power generation system by small-scale unit serial development' considering regional characteristics in the Wasabizawa area, the power generation cost (sending end, 15-year average) was estimated at approximately 9-10 yen/kWh. (NEDO)

Report on the geothermal development promotion survey. No.C-2. Wasabizawa area; Chinetsu kaihatsu sokushin chosa hokokusho. No.C-2 Wasabizawa chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper summed up the results of the survey of the geothermal development promotion survey - Wasabizawa area which was carried out in Yuzawa City and Ogachi Town, Akita Prefecture, from FY 1993 to FY 1996. In the survey, the following were conducted: surface survey such as geological alteration zone survey, fluid geochemical survey, gravity survey and electromagnetic exploration, temperature log by drilling 9 exploration wells, short-term/long-term jetting test, etc. Further, using the data obtained from these, analysis was made of geology/reservoir structure, thermal structure, geothermal water/hydraulic structure, geothermal system models, etc. As a result, a high-temperature (about 300 degrees C) zone promising as the geothermal development area was picked out, and the existence was confirmed of a dominant geothermal reservoir around the fault. In the jetting test, a total steam amount of 111.6 t/h was confirmed, and from the reservoir simulation, the result was obtained that there was a high possibility of 30-year power generation of 30MW/y. As a result of studying 'a power generation system by small-scale unit serial development' considering regional characteristics in the Wasabizawa area, the power generation cost (sending end, 15-year average) was estimated at approximately 9-10 yen/kWh. (NEDO)

Report on the geothermal development promotion survey. No.B-7. Kuwanosawa area; Chinetsu kaihatsu sokushin chosa hokokusho. No. B-7 Kuwanosawa chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

The paper summed up the results of the geothermal development promotion survey B 'Kuwanosawa area' which was carried out in Yuzawa city, Akita prefecture, from FY 1998 to FY 1999. In the survey, the following were conducted for the comprehensive analysis: geology/alteration zone survey, gravity exploration, electromagnetic exploration, environmental effect survey, well geology survey by drilling structural boreholes of N11-KN-1 and N12-KN-2, cuttings test, temperature log, temperature recovery test, electrical log, water injection test, etc. The geology in the Kuwanosawa area is composed of Pre-neogene period basement rocks, Neogene system and Quaternary system. In this area, there were recognized no gush of geothermal fluids such as hot spring and fumarolic gas and no obvious geothermal manifestation such as high-temperature places and new geothermal alteration zones. Around N12-KN-2, there exists the geothermal water with comparatively high-temperature/high-Cl concentration which is similar to that in the Wasabizawa area, but how it flows is unknown because there was no lost circulation in the depths of the borehole. Around N11-KN-1, there exists the low-temperature/low-Cl concentration geothermal water originating in meteoric water, and therefore, the area can be a rechargeable area. The Kuwanosawa area is regarded as the periphery of the Wasabizawa-Akinomiya geothermal area. (NEDO)

Report on the geothermal development promotion survey. No.34. Kaminoyu/Santai area; Chinetsu kaihatsu sokushin chosa hokokusho. No. 34 Kaminoyu Santai chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The paper summed up the results of the geothermal development promotion survey 'Kaminoyu/Santai area' which was carried out at Yakumo town, Yamakoshi county, and Mori town, Kayabe county, Hokkaido, from FY 1990 to FY 1992. In the survey, the following were conducted for the comprehensive analysis: surface survey such as geology/alteration zone survey, geochemical survey and gravity exploration, test to induce jetting of geothermal fluids by drilling 7 boreholes, temperature/pressure log, etc. The geological structure of this area is featured by the uplift structure/caldera structure and the anticline structure. In the wide-area geothermal system, it is thought that the low-temperature seawater permeates underground by mixture with meteoric water, is heated, and forms the deep geothermal water. It is thought that the hot spring water in this area is stored in the hot spring reservoir by mixture with the surface water, and it is gushing. In the area, the region which is regarded as favorable as passage/storage place of geothermal fluid is a region of 1.5km width extending linearly in the E-W direction from the Nigorikawa basin to Kaminoyu. Further, it is thought that fractures were unfavorably developed in the Santai/Kaminoyu area. (NEDO)

Fiscal 1989 geothermal development promotion survey report. Data sampled by ground based survey and attached to the report (Electromagnetic surveillance - TDEM - No. 32. Hachijo Island region); Chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. 1989 nendo chinetsu kaihatsu sokushin chosa denji tansa (TDEM ho) hokokusho (No. 32 Hachijojima chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-11-01

A TDEM (time domain electromagnetic) surveillance was conducted for the Hachijo Island region, Tokyo. The survey covered a 70 km{sup 2} area, with 81 observation stations. There was a distance of 1 km or more between transmission electrodes, the signal was a rectangular wave with a cycle of 16 seconds or more, the sending current was 60 A or more, and the shortest distance between a transmission electrode and an observation station was 2.5 km or more. A subsurface structure model was proposed after the analysis of the collected data, which is described below. In the Mt. Nishiyama district, the deep-seated magnetic substance, high-conduction zone, and the low gravity anomaly zone were found to be roughly equal to each other in terms of distribution. It is inferred that the low gravity anomaly results from reduction in resistivity by the progress of fractioning of rocks due to the intrusion of a magnetized rock into the depth and from mass defect due to volcanic eruption. In the Mt. Higashiyama district, a high density rock intrudes in the ENE-WSW direction for the creation of a high gravity anomaly belt, and it is inferred that alteration occurred along the southern rim of the belt, that magnetic substance was produced in the cavity-abundant portion, and that a volcano with several craters rose at the middle of the portion. (NEDO)

Field experiment for investigation of very shallow basement structure by micro-gravity survey; Microgravity tansa no gokusenbu kiban chosa eno tekiyo jikken

Energy Technology Data Exchange (ETDEWEB)

Oshita, K; Nozaki, K [OYO Corp., Tokyo (Japan)

1997-10-22

This paper illustrates the field experiment results in which micro-gravity survey was applied to investigation of very shallow basement structure between a few m and 10 m. Its applicability was discussed. In principle, the micro-gravity survey was conducted at the measuring points in a grid with 20 m pitch. Measuring points of 174 were used. The gravity system used for the measurements is an automatic gravimeter CG-3M made by the Scintrex. Survey results of P-wave reflection method conducted at the site using a vibrator focus were used as control data of micro-gravity survey. Consequently, change in the thickness of surface layer (earth filling) shallower than the depth of -10 m could be grasped as a plane. It was found that the micro-gravity survey is a useful method for the investigation of very shallow basement structure. Survey results by the reflection method could contribute to the determination of trend face at filtration and construction of density model as well as the geologic interpretation of gravity anomaly. As a result, reliability of micro-gravity survey and reflection method could be enhanced, mutually. 3 refs., 8 figs.

Fiscal 2000 research achievement report. Super-advanced electronics technologies development promotion project; 2000 nendo kenkyu seika hokokusho. Cho sentan gijutsu kaihatsu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-01

For the construction of a common base of key technologies in the domain of electronics and information with the influence propagating across a wide range of industries, research and development was conducted of technologies of ultrafine working process, technologies of ultimate measurement, analysis, and control, technologies of new functional electronic materials, etc. Studied in the field of electron beam lithography were high precision and large area imaging technology, highly accurate electron optics control system technology, and beam monitoring technology. Studied in the field of ultrashort wavelength electromagnetic wave patterning system technology were proximity ultrashort wavelength electromagnetic wave patterning system technology, reduced ultrashort wavelength electromagnetic wave patterning system technology, and ultrahigh precision new materials patterning technology. Also studied were technologies of super-advanced plasma measurement, analysis, and control, and technology of super-advanced cleaning. In the field of technologies of new functional elements and films, studies were conducted about technologies of highly sensitive GMR (giant magnetoresistive) film and head fabrication process for contact magnetic recording and technologies of a spin-valve head with submicron track width for contact magnetic recording. (NEDO)

Report on the geothermal development promotion survey. No.B-6. Mt. Tsujinodake area; Chinetsu kaihatsu sokushin chosa hokokusho. No. B-6 Tsujinodake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper summed up the results of the geothermal development promotion survey B 'Mt. Tsujinodake area' which was carried out at Yamagawa town, Ibusuki county, Kagoshima prefecture, from FY 1997 to FY 1999. In the survey, the following were conducted: surface survey such as geology/alteration zone survey, fluid geochemical survey, gravity exploration and electromagnetic exploration, and geothermal fluid survey by drilling 4 structural testing boreholes. In the Mt. Tsujinodake area, active fumarolic activities are still now continuing around the Unagi hot spring in the north, and the acidic alteration zone is distributed in the peripheral surface area. In Borehole N11-TD-2 in the north, it is assumed that there exists the hydrothermal bed of a temperature of approximately 230 degrees C in the depth of 400-800m, which is comparatively shallow, and that the stored geothermal water flows laterally. In the central area, a hydrothermal bed of a temperature of approximately 130 degrees C was confirmed in N11-TD-1, but it is judged that chances of the existence of high temperature hydrothermal bed are not very good. In N11-TD-3 in the south, the existence of promising heat sources is expected in the deeper part since the remarkable alteration was seen in the depth of 1,435m or deeper, and the sharp rise in temperature was recognized. (NEDO)

Report on the geothermal development promotion survey. No.38. Mt. Aso West area; Chinetsu kaihatsu sokushin chosa hokokusho. No. 38 Asozan seibu chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The paper summed up the results of the geothermal development promotion survey 'Mt. Aso West area' which was carried out at Choyo village and Kugino village, Aso county, and at Otsu town, Kikuchi county, Kumamoto prefecture, from FY 1991 to FY 1994. In the survey, the following were conducted for the comprehensive analysis: surface survey such as geology/alteration zone survey, geochemical survey and high precision MT method survey, and temperature log, electrical log, water injection test, core test and hydrothermal survey by drilling 7 structural boreholes. In the numerical analysis of thermal structure models, the present geothermal manifestation was obtained, assuming that the past magma reservoir in a state of agglomeration/semi-agglomeration exists in the depths of caldera and that the depth is set at 4km. It is assumed that the deep hydrothermal reservoir around Yunoya/Tarutama exists around the depth of 500-600m below sea level and that the temperature is 230-300 degrees C. The meteoric water permeating into the depths forms high-temperature reservoirs around Yunoya/Tarutama. The reservoir rises up to about 400m below sea level to become a vapor-dominated phase. It forms an acidic SO{sub 4} type reservoir phase around the earth surface. (NEDO)

Report on the geothermal development promotion survey. No.38. Mt. Aso West area; Chinetsu kaihatsu sokushin chosa hokokusho. No. 38 Asozan seibu chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The paper summed up the results of the geothermal development promotion survey 'Mt. Aso West area' which was carried out at Choyo village and Kugino village, Aso county, and at Otsu town, Kikuchi county, Kumamoto prefecture, from FY 1991 to FY 1994. In the survey, the following were conducted for the comprehensive analysis: surface survey such as geology/alteration zone survey, geochemical survey and high precision MT method survey, and temperature log, electrical log, water injection test, core test and hydrothermal survey by drilling 7 structural boreholes. In the numerical analysis of thermal structure models, the present geothermal manifestation was obtained, assuming that the past magma reservoir in a state of agglomeration/semi-agglomeration exists in the depths of caldera and that the depth is set at 4km. It is assumed that the deep hydrothermal reservoir around Yunoya/Tarutama exists around the depth of 500-600m below sea level and that the temperature is 230-300 degrees C. The meteoric water permeating into the depths forms high-temperature reservoirs around Yunoya/Tarutama. The reservoir rises up to about 400m below sea level to become a vapor-dominated phase. It forms an acidic SO{sub 4} type reservoir phase around the earth surface. (NEDO)

Fiscal 1999 research report. Survey on geothermal development sites (Survey on natural environment); 1999 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the result on selecting sites for large-caliber production wells, and landscape characteristic evaluation for simulation, based on the landscape survey on C candidate site for geothermal development. Field survey was made on landscape, plants and animals in the Kirishima Eboshidake area. It was clarified that this area has diverse flora including some rare species such as rein orchid and monkshood which are listed as endangered species. In addition, not a few epiphytes were identified. The zoological survey result showed that planted forests of evergreen coniferous trees which cover a wide range of the surveyed area, and peripheral grassland, scrub and natural forests provide good habitats for mammals such as sika deer and wild boars. On the other hand, no animal species in need of special protection were found. Geologically some traces of landslide occurrence in the past were detected in the northern part of the surveyed area relatively. As the survey result, some promising sites suitable for geothermal development were selected, which are judged to have a relatively small impact on natural environment and landscape. (NEDO)

Investigation report on promotion of geothermal development. No. A-4, Mt. Kunbetsu area; Chinetsu kaihatsu sokushin chosa hokokusho. No.A-4 Kunbetsudake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This paper summarizes the results of investigations in the Mt. Kunbetsu area out of the investigations on promotion of geothermal development having been performed during the period from 1998 to 1999. The investigated area is an area located in the eastern Hokkaido with an area of about 300 km{sup 2}. The wide area investigation has discussed possibilities of existence of geothermal resources mainly from existence of high-temperature anomalies. The investigation has performed the following activities: fluid geochemical investigations on ten spring water sources, three spring gas sources, and five surface water points; gravity exploration at 153 measuring points; electromagnetic exploration at 52 measuring points; excavation of two heat flow rate wells (to depths of 997m and 995m), temperature logging, core cuttings tests, thermal hot water survey; other fluid inclusions tests, rock alteration age measurement; and temperature logging at Ryuun Shiretoko Spa. As a result of the investigations, it was estimated that, as the geothermal system model, the heat source is assumed to exist at a great depth below Mt. Kaibetsu; the spring water and the mineral spring water show diverse spring qualities because of mixing of meteoric water with fossil sea water; the fossil sea water and the meteoric water have been heated by thermal conduction; and the high-temperature zone is not spread to the positions of the investigation wells. (NEDO)

Winter the Future 2010 Project. Wide-area heat supply system for new northtype city service plans; Fuyu mirai 2010 project. Shinhoppogata toshi seibi plan koiki netsu kyokyu system

Energy Technology Data Exchange (ETDEWEB)

Ochifuji, K. [Hokkaido University, Sapporo (Japan); Furumichi, N. [Hokkaido Area Management and Support Foundation, Sapporo (Japan); Fujiwara, Y.

1998-11-05

Described herein are the survey/research works for development of new cities in Hokkaido and energy systems therefor. The energy system is characterized by `heat/power cogeneration,` known for its high energy efficiency, for development of a new city in a cold district and effective utilization of energy on the assumption that a power generation system is installed in or near the city. The heat produced will be used for improvement of urban amenity, e.g., snow thawing, in addition to air-conditioning and production of hot water. The centralized system has a cogeneration plant as the main heat source and an auxiliary source, e.g., waste heat from garbage incineration or sewage disposal. The dispersed system depends on only cogeneration. These systems will save energy by approximately 13 and 11%, respectively, and both abate CO2 emissions by 20%, from those associated with the conventional system. The retail heat price is set at 10 yen/Mcal, 30% lower than the current level. 12 figs., 5 tabs.

FY 1991 report on the survey of geothermal development promotion. Attached data. Electromagnetic exploration (High accuracy MT method) (No.38 - West area of Mt. Aso); Chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. 1991 nendo chinetsu kaihatsu sokushin chosa - Denji tansa (Koseido MT ho) hokokusho (No.38 Asosan seibu chiiki - Tenpu shiryo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-01

As a part of the survey of geothermal development promotion in FY 1991, electromagnetic exploration by the high accuracy MT method was conducted to acquire the information on the geothermal structure in the west area of Mt. Aso, Kumamoto Prefecture. The detailed data were arranged as the data attached to the report on the electromagnetic exploration. As the attached data, included were the results of the 1D analysis (measuring/analysis {rho}a-F chart, analytic structure drawing), results of the 1D analysis (numerical list of the apparent resistivity analytic value and inverse analytic value) and numerical list of the apparent resistivity measured value. (NEDO)

1998 Annual Study Report. Standardization of manufacturing process systems; 1998 nendo seika hokokusho. Seisan process system no hyojunka (STEP kiban kikaku no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The standards for exchanging and sharing product model data are being internationalized, mainly by ISO-10303 (STEP). The current specifications are not fully developed to include all of the functions needed by the industrial circles, e.g., the functions capable of expressing dynamic product models useful for design alterations and manufacturing processes. In order to solve these problems, and, in particular, to propose the specifications which meet the functions required by the domestic industries, the necessary conditions which the STEP basic specifications should satisfy are investigate to propose the Japan-developed international specifications. One of the major results of the efforts in this year is development of the functional model (I-AAM) which allows to analyze the functions to be proposed for the specifications for the mechanical production processes in the Japanese industries. The necessary data model candidates can be selected by the aid of the model. The efforts will be further continued in and after the next year, based on the results obtained in this year, to eventually develop the specifications which can be registered by NWI. (NEDO)

FY1995 microalgal biotechnology for recycling of pollutants; 1995 nendo tayona sorui kino wo kiban to suru seibutsuken busshitsu junkangta sogo saishigenka gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The objectives are 1) development of biological processes needed for the treatment of pollutants and the conversion of resulting biomass to value added products such as energy and fine chemicals, and 2) development of techniques for monitoring of both biological and chemical hazards associated with process operation. We developed a microalgal system for simultaneous removal of CO{sub 2}/NO{sub x} from flue gas, as well as an electro-osmotic method for recovery of microalgal cells. A strategy for effective culturing of photoautotrophic cells in photobioreactors was also proposed. We utilized waste algal biomass to produce biosurfactants, and studied about structure-function relationship of lipopeptide biosurfactants. As an energy product, H{sub 2} was produced via lactic acid fermentation of algal biomass. Physiology of marine phytoplankton was also studied in relation to the future mass production of microalgal biomass. A rapid monitoring of microbial populations was possible by using fluorescent probes. An enzyme immunosorbent assay system specific to fish metallothionein was established for the assessment of aquatic environmental pollution. Human herpesvirus latent infection was effectively applied to biological assay of environmental hygiene. (NEDO)

Geothermal development promotion survey report. No. 28. Eastern part of Obanazawa region; 1988-1990 chinetsu kaihatsu sokushin chosa hokokusho. No. 28 Obanazawa tobu chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

The results of surveys conducted in the eastern part of Obanazawa region, Yamagata Prefecture, in fiscal 1988-1989 are compiled in this report. Conducted were a geological/alteration zone survey, geochemical survey, electromagnetic surveillance (TDEM - time domain electromagnetic method), gravity prospecting (review of gravity data), electric prospecting (Schlumberger method), heat flow rate survey, test boring, environmental impact survey, and so forth. Conclusions are mentioned below. It is inferred that the water of the Ginzan hot spring of the neutral Cl-SO{sub 4} type originates in meteoric water in mountains high above the mean sea level in the western side and that the hot spring water is produced when water heated to approximately 170 degrees C at a depth (1,500-2,000 meters below mean sea level) in the Ginzan hot spring district, where the ground temperature is the highest in this region, is diluted by groundwater near the surface at its ultimate stage of ascent. The survey results disclose that possibilities are quite low that a high-temperature sector of 200 degrees C or higher is found at a level not deeper than 2,000 meters from the ground surface. Accordingly, no geothermal development by flash steam power generation is feasible at the present stage at any economically acceptable depth. (NEDO)

Fiscal 1998 research achievement report. Project for promoting development of super-advanced electronic technology; 1998 nendo chosentan denshi gijutsu kaihatsu sokushin jigyo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

For the purpose of establishing super-advanced technologies two generations ahead in the field of electronics and information, research and development was carried out involving ultrafine machining process technology, technologies of ultimate measuring, analysis, and control, and technologies of electronic materials equipped with novel functions. In the study of writing systems in which writing is performed directly by an electron beam, writing technologies using electron beams under single-column and multi-column systems were taken up. In the study of ultrashort wavelength electromagnetic wave patterning systems, studies were made about equimultiple ultrashort wavelength and reduced ultrashort wavelength electromagnetic wave patterning. In the study of ultrahigh precision shielding systems, studies involved high precision in situ measurement and control of writing distortion, and ultrahigh precision and high current density electronic optical technologies. Also carried out were research and development of technologies of super-advanced plasma measurement, analysis, and control, technology of cleaning by ultrafine particle control, technology of ultrahigh sensitivity medium, and technologies of new functional elements and film fabrication. In the overall research and survey, surveys were conducted of the trends of development of technology of semiconductor related lithography. (NEDO)

FY 1998 annual report on the geothermal development promotion survey. Report on landscape survey; 1998 nendo chinetsu kaihatsu sokushin chosa hokokusho. Shizen kankyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are results of the natural environment surveys, carried out in the Shitanotai Region in Yuzawa City, Akita Pref., where Geothermal Development Promotion Survey C is scheduled. On-the-spot surveys, conducted from June to November, covered 3 items of landscape, vegetation and animals. The Shimonotai Region has a number of ponds and swamps, some of which are used as fields for Brasenia shreberi, and wet shield plant communities in places reflecting these environments. The zoological survey results show that moderate to dry deciduous forests of Japanese beeches (Fagus crenata) and Mongolian oaks (Quercus mongolica var. grossesserrata) in this region provide sound habitats for large mammalian wild animals, e.g., moon bears (Selenarctos thibetanus). For birds, there are some areas extracted indicating high possibility of being inhabited by honey buzzards (Pernis ptilorhyncus), which are listed as a near threatened species by the Environment Agency. Geologically, traces of landslide occurrence in the past have been detected widely, indicating need for more detailed investigation for land stability. These surveys have extracted several areas whose natural environments and landscapes are damaged relatively little by geothermal development. (NEDO)

FY 2000 research and development of fundamental technologies for AC superconducting power devices. R and D of fundamental technologies for superconducting power cables and faults current limiters, R and D of superconducting magnets for power applications, and study on the total systems and related subjects; 2000 nendo koryu chodendo denryoku kiki kiban gijutsu kenkyu kaihatsu seika hokokusho. Chodendo soden cable kiban gijutsu no kenkyu kaihatsu, chodendo genryuki kiban gijutsu no kenkyu kaihatsu, denryokuyo chodendo magnet no kenkyu kaihatsu, total system nado no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The project for research and development of fundamental technologies for AC superconducting power devices has been started, and the FY 2000 results are reported. The R and D of fundamental technologies for superconducting power cables include grasping the mechanical characteristics associated with integration necessary for fabrication of large current capacity and long cables; development of barrier cable materials by various methods; and development of short insulated tubes as cooling technology for long superconducting cables, and grasping its thermal/mechanical characteristics. The R and D of faults current limiters include introduction of the unit for superconducting film fabrication, determination of the structures and layouts for large currents, and improvement of performance of each device for high voltages. R and D of superconducting magnets for power applications include grasping the fundamental characteristics of insulation at cryogenic temperature, completion of the insulation designs for high voltage/current lead bushing, and development of prototype sub-cooled nitrogen cooling unit for cooling each AC power device. Study on the total systems and related subjects include analysis for stabilization of the group model systems, to confirm improved voltage stability when the superconducting cable is in service. (NEDO)

Crossflow type silicon microchannel substrate monodispersion oil-in-water emulsion manufacture; Kurosufuro gata shirikon maikuro chaneru kiban wo mochiita tanbunsan suchuyu emarushon no sakusei

Energy Technology Data Exchange (ETDEWEB)

Kawakatsu, Takahiro [Tohoku University, Miyagi (Japan). Graduate School; Komori, Hideai; Najima, Mitsutashi; Kikuchi, Yuji; Yonemoto, Toshikuni

1999-05-05

The new technique, which continuously produced the monodispersion oil-in-water (0/W) emulsion using the crossflow type silicon microchannel substrate, was developed. On the silicon monocrystal substrate, the watercourse as the liquid of the continuous phase flowed was produced, and the column of the equal slit of the size in both walls of the watercourse was precisely processed. By closing the upper part in the slit by the clamp of the flat glass board in the microchannel substrate, the microchannel column was formed. Through the microchannel, the oil droplet in which the size was even was formed by sending out the oil (triolein) in the water (0.3wt% sodium lauryl sulfate aqueous solution) of continuous phase which is flowing in respect of the watercourse. The size of the oil droplet is greatly dependent on the structure of the microchannel regulated by microchannel width, microchannel height and terrace length (the even part of which the microchannel exit was equipped). Monodispersion emulsion of 16,20 and 48 {mu}m at the average droplet diameter was formed by using microchannel substrate of the three types of which the structure differs. Droplet diameter decreased, when the substrate which formed large droplet of 48 {mu}m in which the water current quantity is 1.4x10{sup -2}mLmin{sup -1} was used, when the flow rate increased. However, there was no a flow rate at droplet diameter, even if it was made to change from 1.4x10{sup -2} to 2.4mLmin{sup -1}, 16 {mu}m 20 {mu}m small change. In all cases, the droplet size distribution was narrow, and the geometry standard deviation was under 1.03. (translated by NEDO)

Fiscal 1999 geothermal energy development promotion survey. Report on resource assessment for Shiramizugoe area; 1999 nendo chinetsu kaihatsu sokushin chosa hokokusho. Shiramizugoe chiiki shigen hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Under an assumed plan of building a geothermal power station in the Shiramizugoe area of Makizono-cho, Aira-gun, Kagoshima Prefecture, investigations will be conducted under a 4-year program into the amount of geothermal resources, the dimensions and cost performance of a geothermal power station under consideration, and the environmental impact that the locating of such will incur, through for example identifying areas containing geothermal reservoirs suitable for geothermal power generation. In fiscal 1999, activities were conducted in the three fields of (1) survey plan preparation, (2) comprehensive analysis, and (3) environmental assessment. Under item (1), a survey and coordination implementation plan was prepared, existing data were analyzed for the construction of geothermal models out of which a suitable geothermal structure was specified for digging, and a list was drafted of locations for borehole digging for fiscal 2000. Under item (2), it was found that most of the past surveys covered the Ogiri area and that the Shiramizugoe area was but poorly covered. Discussion was made on the geological structure, geothermal structure, geothermal water hydraulic structure, and the geothermal water system. Under item (3), the plan was summarily explained to the local administration, associations of hot spring hotels, and inhabitants in the vicinity, and their consent was obtained. (NEDO)

Geothermal development promotion survey. No.B-4 'Kuenohira-yama area'; 1997 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.B-4 Kuenohira-yama chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

The above-named survey had been scheduled to be conducted in fiscal years 1996-1998 for an approximately 10km{sup 2}-large area of Kokonoe-cho, Kusu-gun, Oita Prefecture. In fiscal 1996, surface surveys were conducted, such as geological and alteration zone surveys, gravity prospecting, and electromagnetic survey. In fiscal 1997, an exploration well (N9-KH-1: depth 2,222.0m) was drilled. Since the maximum temperature in the well was found to be so low as 78.5 degrees C, the survey was given up in the second year. The survey conducted at N9-KH-1 showed that deep-seated and shallow-seated ruptures developed there in the absence of aquicludes, and so it was inferred that it was a recharge area, as predicted by the temperature logging profile, with surface water flowing into the depth. The above showed that there was no deep-seated blind geothermal system which the survey was after. Since it was not likely that the shallow-seated geothermal system located in the southern part of the Mizuwake pass would be found expanding into the area of the current survey, it was decided that the survey not be carried forward to the following fiscal year. (NEDO)

FY1997 geothermal development promotion survey. Development feasibility study 'Ashiro area'; 1997 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa (Ashiro chiiki) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

With regard to the Ashiro Town area in Iwate Prefecture, this paper reports the result of evaluations based on temperature and pressure logging after a lapse of an extended period of time (well No.2) and a steam jet test (well No.1). These activities were performed as the survey on promotion of geothermal development and survey on development feasibility in fiscal 1997. As a result of the overall analysis based on the present survey and ones in the past, the geothermal system model in the surveyed area may be conceived as follows: in both of the N7-AR-1 and N7-AR-2 wells drilled in the southern part of the surveyed area, temperature as high as 250 degrees C or higher was confirmed; the underground temperature is 200 degrees C or higher at an altitude level of zero meter and 250 degrees C at around -500 m, leading to a belief that the high temperature area spreads to south; as a fracture system holding geothermal fluid, a fault was identified at the N7-AR-1 well drilling depth of 1710 m; in the steam jet test, a geothermal reservoir (a shallow geothermal reservoir) was confirmed to exist; the geothermal fluid that has jetted out shows alkaline Na-SO{sub 4} type; and the deep geothermal reservoir has high temperature and is presumed to be in the two-phase condition, presenting promising factors as the geothermal resources. (NEDO)

Geothermal development promotion survey report. No. 29. Upper reach region of Oita river; 1988-1990 chinetsu kaihatsu sokushin chosa hokokusho. No. 29 Oitagawa joryu chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

The results of surveys conducted in the Oita river region, Oita Prefecture, in fiscal 1988-1989 are compiled in this report. Conducted were a geological/alteration zone survey, geochemical survey, electric prospecting (Schlumberger method), electromagnetic surveillance (simplified magnetotelluric method), electromagnetic surveillance (EMAP - Environmental Monitoring and Assessment Program method), heat flow rate survey, test boring, environmental impact survey, and so forth. Conclusions are mentioned below. It is inferred that the geothermal fluid results from groundwater originating in meteoric water, that the meteoric water takes many years to flow from the mountainous region into the ground where it is stored mainly in the Shonai stratum, that the stored water is warmed by heat from rocks in the neighborhood for development into a geothermal fluid, and that the geothermal fluid finally forms a hot spring water reservoir. Hot spring water reservoirs are found widely distributed in the basin of the Oita river. In view of the ground temperature distribution and the hot spring water geochemical temperature determined by structure boring, it is concluded that possibilities are quite low that there exists a high-temperature geothermal fluid usable for power generation. (NEDO)

Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Research and development concerning environment-related reference materials); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (kankyo kanren hyojun busshitsu ni kansuru kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Concerning an information providing system on environment-related reference materials, studies were conducted about the contents of information to be provided and about hardware and software suitable for such a system. In a survey of needs for such an information system, questionnaires were sent to 320 agencies and business corporations providing or utilizing reference materials in the field of chemistry and environments, and 158 answers were received. Further surveys were carried out by visiting more than 20 organizations providing or utilizing reference materials. As for activities overseas, surveys were conducted in Europe, North America, and Oceania, when IRMM (Institute for Reference Materials and Measurements) of Belgium, Merck KGaA of Germany, and some others were visited. It was then found that they desired that retrieval of information on reference materials in Japan and abroad be enabled by merely accessing related Internet sites. To meet the wish, a concept design was prepared of a comprehensive information system on reference materials in the form of an Internet home site. (NEDO)

Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si sheets by continuous casting method); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (renzoku cast ho ni yoru tei cost Si kiban seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on manufacturing of low-cost Si substrates by continuous casting method in fiscal 1994. (1) On manufacturing of ingots of 16 piece size, the ingot of nearly 170kg was manufactured by batch process using the Si melt injection unit prepared in last year. (2) On oxygen and carbon contents in wafers, the contents were measured by FT-IR after slicing of the ingot. As a result, the oxygen and carbon contents could be successfully reduced to the targets of 10ppma and 5ppma or less, respectively. (3) The resistivity distribution of the ingot ranged over the target of 1-2ohm-cm. (4) Cells of 100 {times} 100mm{sup 2} wide and 350{mu}m thick were verified by in-house evaluation process. Although lower cell conversion efficiency was found at the center top of the ingot, a vertical efficiency stability was nearly sufficient as a whole. (5) On the crystal growth unit prepared in fiscal 1994, any problems were not found on automatic driving and vibration during moving. 8 figs.

FY 1998 report on the results of the R and D for acceleration of biological resource information basement preparation (bioinformatics). Third revision. Development of measurement technology of interaction among biological molecules (Development of high-precise automatic analysis technology for a trace amount of cellular protein); 1998 nendo seibutsu shigen joho kiban seibi kasokuka kenkyu kaihatsu (bioinformatics) seika hokokusho. Seitai bunshikan sogo sayo no keisoku gijutsu no kaihatsu (saibonai chobiryo tanpakushitsu no koseido jido kaiseki gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

An experimental study was conducted with the aim of developing the technology to acquire/analyze in high sensitivity manifestation proteins existing in a trace amount and in various kinds, concretely, signal transfer molecules, transcription factors, etc. which exist in one cell. After extracting a trace amount of functional proteins for analysis from the specified functional cell, the study was made on the following: precise separation and detection technique for cellular proteins, efficient digestion technique and contaminant elimination technique of stained protein, precise separation of peptides by micro-LC technique, precise peptide molecular mass detection of each separated peptide with high sensitivity, reconstruction of protein structure by computer algorithm. As a result, as to the analysis level, an analysis technology with high sensitivity of a 50 fmol level was established as against the existing level of several pmol. Moreover, after the separation/digestion of proteins by the 2D electrophoresis, a series of the process automation system was completed which is high-precise separation using protein columns - molecular analysis - structure prediction by computer. (NEDO)

Fiscal 1997 achievement report. Research and development of comprehensive basic technology on marine resources; Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu sogo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The deep-sea manganese nodule mining system in this report collects efficiently and continuously a large quantity of manganese nodules in existence in the 5,000m-deep sea floor. The aim of the project is to develop and build an experimental system for a real mining machine and to perform a comprehensive marine test to find out if such a real machine is technologically and economically feasible. The system under this project is divided into four systems, which are a nodule mining system, nodule lifting system, nodule handling system, and a measurement control system. The nodule mining system travels on the sea bottom efficiently collecting manganese nodules and forwarding them into the nodule lifting system. Only a few systems of this kind have so far been developed, however, and therefore much endeavor needs to be exerted for the development of technologies involved. The nodule lifting system is divided into a pump lift unit, air lift unit, and a nodule lifting pipe. The pump lift unit and air lift unit elevate manganese nodules supplied from the nodule collecting unit to the sea surface. The nodule lifting pipe provides a passage for nodules to run through upward. (NEDO)

Fiscal 1997 report on the investigational research on intelligent social infrastructure technology; 1997 nendo chosa hokokusho (chiteki shakai kiban kogaku gijutsu no chosa kenkyu hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper first described an aim and outline of intelligent social infrastructure technology, summed up the system of social infrastructure and the situation in Japan in terms of the structure, lifeline, moving bodies such as railroad and automobiles, communication, security, and maintenance. Considering this present situation, the paper next described a concept of the intelligent social infrastructure technology to be newly constructed and a course of the development. Besides, as subjects required to study for the development of intelligent social infrastructure technology, it reported on risk management, methods of definition/collection/transfer/supply of information, infrastructure applicable at emergency, normal/emergency dual course system, privacy, robustness, and additionally the problems to be caused pertaining to architecture/civil engineering, traffic, security, communication, etc. when the infrastructure develops as a social system. Moreover, as element technology, the intelligent system related technology and data communication technology were described in detail. Examples of the research project were also reported. 101 refs., 70 figs., 42 tabs.

Report of the researcher exchange promotion project on the environmental issues in the Asia-Pacific region; Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Proposals have been made for the establishment of a network (ETERNET-APR) linking those involved in the research and development of environmental technology in the Asia-Pacific region in order to limit the environmental impact of industrial activity. By pursuing active exchanges of information and personnel, researchers in environmental technology in the Asia-Pacific region have been making serious efforts to establish such a network. This fiscal year, the Internet Web site of the ETERNET-APR has been created using the data collected to date. This database includes information on some 350 researchers and 200 research projects from seven countries. The first international symposium was successfully held at Environmental Research Institute of Chulalongkorn University in Thailand (ERIC), hosting 200 environmental researchers from 10 countries in the Asia-Pacific region. Tripartite sister laboratories ties among the National Institute for Resources and Environment (NIRE) and three Korean laboratories were forged. The sister laboratory project between ICETT and ERIC is also proving effective. These successes prove that intraregional joint research, the objective of ETERNET-APR, has begun to take shape in this year

Fiscal 1992 report on geothermal development promotion survey (Development of geothermal reservoir assessment technique); 1989 nendo chinetsu kaihatsu sokushin chosa (Chinetsu choryusou hyoka shuho kaihatsu hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Efforts were exerted in fiscal 1984-1992 to develop techniques for appropriately assessing a geothermal reservoir for its productivity for duly predicting the optimum scale of power generation to be provided thereby. In the development of simulators, geothermal reservoir simulators (SING-1, -2, -3) and a geothermal well 2-phase flow simulator (WENG) were developed. As for the treatment of fractures in a reservoir and of substances soluble in the hot water, the methods for dealing with them were improved and augmented. In a model field study in a Hokkaido forest, reservoir pressure continuous observation and monitoring, temperature logging and pressure logging for existing wells, and geothermal fluid chemical analysis were performed for reservoir analysis, in which both natural state simulation and history mapping excellently reproduced the temperature and pressure distributions. The temperature and pressure distributions in a natural state simulation, out of the results of an analysis of the Oguni district model field, Kumamoto Prefecture, agreed not only with those in the natural state but also with the pressure transition data in the observation well. (NEDO)

Fiscal 2000 report on result of project for promoting exchange of international environmental technology information; 2000 nendo kankyo gijutsu kokusai joho koryu sokushin jigyo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the purpose of sharing environmental technology information of the APEC countries, the homepage structuring was commenced linking and systematizing the home pages owned by governments, institutions, enterprises, etc., as the APEC Virtual Center (APEC-VC) project, with the fiscal 2000 results reported. In creating the homepage contents, in order to disseminate more useful information for the developing countries, 'Environmental Technology Cooperation for Developing Countries' as the original contents was prepared. In building a search engine, for the purpose of improving convenience for website users of the Virtual Center, APEC VC Japan created a retrieval system on the site. In overseas investigation, the researchers visited local plants to grasp problems and the needs by enterprises and organizations on water-pollution, waste treatment and the like, with the purpose of reflecting the investigation result in the website. In addition, the researchers visited APEC VC coordinators and/or contact points to exchange opinions with the view of expanding the network. (NEDO)

Fiscal 2000 report on result of project for promoting exchange of international environmental technology information; 2000 nendo kankyo gijutsu kokusai joho koryu sokushin jigyo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the purpose of sharing environmental technology information of the APEC countries, the homepage structuring was commenced linking and systematizing the home pages owned by governments, institutions, enterprises, etc., as the APEC Virtual Center (APEC-VC) project, with the fiscal 2000 results reported. In creating the homepage contents, in order to disseminate more useful information for the developing countries, 'Environmental Technology Cooperation for Developing Countries' as the original contents was prepared. In building a search engine, for the purpose of improving convenience for website users of the Virtual Center, APEC VC Japan created a retrieval system on the site. In overseas investigation, the researchers visited local plants to grasp problems and the needs by enterprises and organizations on water-pollution, waste treatment and the like, with the purpose of reflecting the investigation result in the website. In addition, the researchers visited APEC VC coordinators and/or contact points to exchange opinions with the view of expanding the network. (NEDO)

`Joint Research and Development of Industrial Technology,` an international research collaboration for fiscal 1997. Research and development for practical application of low-temperature sinterable, highly heat-radiating materials for ceramics; 1997 nendo kokusai kenkyu kyoryoku jigyo `sangyo kiban gijutsu kyodo kenkyu kaihatsu`. Teion shoketsu kohonetsusei ceramics kiban zairyo no jitsuyoka gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A highly heat-conducting AlN ceramic substrate is developed for the cooling of semiconductor integrated circuit devices and power controlling semiconductor devices. In the development of a low-temperature sinterable ceramic texture, a sintering assistant is selected. In this process various assistants are tested for the effect of their presence on the occurrence of AlN oxidation and on the magnitude of standard energy for aluminate compound formation. The volatility at high temperatures of the components of the assistants are also examined. The sintering assistant developed for this project (mixture of Y2O3, CaO, LaB6, and WO3) is used in the sintering of an AlN material powder developed by The Dow Chemical Co., and then it is demonstrated that highly heat-conducting AlN substrates are mass-produced by continuous sintering at 1600degC in a nitrogen atmosphere, the product having a relative density of 100%, average heat conductivity of 154W/mK, bend resisting strength of 440MPa, and a fracture toughness value of 3.8MPam{sup 1/2}. 6 refs., 92 figs., 10 tabs.

Surveys in Hokkaido on promotion of structuring models to be introduced to convert wastes into energy; Hokkaido ni okeru haikibutsu energy ka donyu model kochiku sokushin chosa

Energy Technology Data Exchange (ETDEWEB)

1993-03-01

With an objective of converting dairy farming wastes and fisheries wastes into resources to be used as energies, this paper discusses development trends and utilization possibilities thereof based on their utilization characteristics. The Tokachi, Abashiri and Nemuro regions produce more cattle wastes, and regions on the coast of the Sea of Okhotsk produce more hepatopancreas of scallop than other regions. The amount of energy from such wastes is subject to large seasonal variations. Methane gas production through methane fermentation is an effective treatment technology, although it is utilized less effectively in Hokkaido. Important is applying the processes depending on energy demand, supply characteristics and regional features. Taking waste utilization characteristics and regionally uneven distribution of resources into account, conceptions on six model systems that could be introduced were structured. The six systems include two types for fisheries wastes utilization, three types for agricultural and dairy farming wastes, and one type for combined utilization of agricultural and fishery wastes. Important factors to select suitable commercial operation sites and promote the operations are stable quantity assurance of waste resources, energy demand, and stable operation, such as could be available in fishery processing complexes and large dairy farming areas. 44 refs., 66 figs., 29 tabs.

Report on surveys in fiscal 2000 on the survey on promotion of freer flow of researchers; 2000 nendo kenkyu jinzai no ryudoka sokushin ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In order to help discuss the system and environment improvement to promote freer flow of Japanese researchers, surveys and discussions were given on the actual status in America and European countries. In the U.S., results as independent researchers are demanded from the very early time under the severely competitive environment, wherein the fair evaluation of the results allows the researchers to step-up the positions and research environment to which the researchers are oriented. In Germany, a function to promote researcher mobility is available as a system, such as promotion of exchange with other sectors during researcher education course (the internship system at the fourth grade in a university, and power training and performance record building at the Max-Planck Institut during the long term of post-doctoral period before attaining a professor position), or prohibition of inviting university professors into the same faculty. The actual status of Japan not having high mobility of researchers has been caused by the system based on the lifetime employment, whose shortcomings include stiffness in personnel affairs, and reduction in activities of researchers due to aging. (NEDO)

Geothermal development promotion survey. No.B-4 'Kuenohira-yama area'; 1997 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.B-4 Kuenohira-yama chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

The above-named survey had been scheduled to be conducted in fiscal years 1996-1998 for an approximately 10km{sup 2}-large area of Kokonoe-cho, Kusu-gun, Oita Prefecture. In fiscal 1996, surface surveys were conducted, such as geological and alteration zone surveys, gravity prospecting, and electromagnetic survey. In fiscal 1997, an exploration well (N9-KH-1: depth 2,222.0m) was drilled. Since the maximum temperature in the well was found to be so low as 78.5 degrees C, the survey was given up in the second year. The survey conducted at N9-KH-1 showed that deep-seated and shallow-seated ruptures developed there in the absence of aquicludes, and so it was inferred that it was a recharge area, as predicted by the temperature logging profile, with surface water flowing into the depth. The above showed that there was no deep-seated blind geothermal system which the survey was after. Since it was not likely that the shallow-seated geothermal system located in the southern part of the Mizuwake pass would be found expanding into the area of the current survey, it was decided that the survey not be carried forward to the following fiscal year. (NEDO)

Research Foundation Institute Joint Symposium '97. Ion, marine biotechnology, microgravity, ultrahigh temperature, and laser; Kenkyu kiban shisetsu godo symposium '97. Ion kaiyo bio mujuryoku chokoon laser

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-10

Presentations were jointly made by NEDO (New Energy and Industrial Technology Development Organization)-financed Ion Engineering Center Corporation, Research Center for the Industrial Utilization of Marine Organisms, Japan Microgravity Center, Japan Ultrahigh Temperature Materials Research Institute, Applied Laser Engineering Center, and organizations annexed to them. The subjects taken up were 'Omnidirectional ion beam technology and titanium ion implantation,' 'Application of ion engineering technology to the prevention of contact allergy,' 'Research on metal/semiconductor transition phase creation for silicon ions,' 'Research on technologies of microalgae-aided CO2 fixation and effective utilization,' 'Construction of gyrB database,' 'Marine microbe-produced antibiotics and assessment of activity,' 'Research on combustion under microgravitational conditions and application to industrial combustors,' 'Research on tube-contained gas/liquid two-phase fluid under microgravitational conditions and application to power generation boiler,' 'Measurement of physical properties of molten semiconductor under microgravitational conditions and research on analysis of heat flow in silicon crystal growing furnace,' 'High temperature oxidation of Mo(Si, Al){sub 2} intermetallic compounds,' 'Development of Nb-based ultrahigh temperature materials,' 'Functional characteristics of Al{sub 2}O{sub 3}/TiC/Ni-based functionally inclined materials,' 'Control of epitaxial crystal growth in CxBE process,' and 'Manufacture of intermetallic compounds by laser plasma hybrid spraying and characteristics.' (NEDO)

Fiscal 1998 research achievement report. Development of key technology for high-efficiency semiconductor manufacturing process; 1998 nendo kokoritsu handotai seizo process kiban gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

In the development of large-aperture/high-density plasma technology, research and development was carried out for balanced electron drift plasma technologies for uniform control of plasma density and the like, such as an excited plasma source and plasma drift to enable wide-range plasma generation in a chamber. In the development of high-efficiency exposure technology, studies were made for stable generation and control of short wavelength excimer laser and for higher-speed large-aperture mask writing by use of an electron beam. In the development of higher-speed processing and energy-efficient technologies, research and development was conducted involving probe card technology for increasing the speed of semiconductor inspection, software-aided virtual tester technology, local energy-efficient cleaning technology in wafer processing and transportation, sheet-type flexible manufacturing system, and the like. (NEDO)

FY 2000 report on the survey for introduction of the hot spring effect prediction method in the geothermal development promotion survey. Improvement of the hot spring effect prediction method in the geothermal development promotion survey; 2000 nendo chinetsu kaihatsu sokushin chosa. Onsen eikyo yosoku shuho donyu chosa - Chinetsu kaihatsu sokushin chosa ni okeru onsen eikyo yosoku shuho no kairyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Supposing the case where the geothermal development promotion survey was carried out in promising geothermal areas in Japan, investigational study was conducted on possibilities of introducing the hot spring effect prediction method, improvement of the method, etc. In the survey, adjustment/classification of formation mechanisms of hot spring were made. For each of the formation mechanisms, the mechanisms in case of the geothermal development having effects were studied/summarized. As to how effects are brought about, presumed were the lowering of water level and decrease in discharge amount in accordance with the decreasing pressure and the dilution by increase in mixture of the ground water around the area. Also cited were the vaporization of hot spring aquifers by the increasing rate of vapor inflow, etc. For the introduction of the hot spring effect prediction method to the geothermal development promotion survey, the problem is short supply of various data, and the examination for it was made. Based on the results of the survey, items to be studied in case of introducing the hot spring effect prediction method were selected. Further, the hot spring effect prediction flow in case of introducing surface survey and well survey was made out. (NEDO)

Fiscal 1998 geothermal development promotion survey. Annex to on-the-ground survey report, geothermal development promotion survey (Part 2. Electromagnetic surveillance using simplified MT method - No. 30: Western part of Hakkoda area); 1989 nendo chinetsu kaihatsu sokushin chosa. Chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo (Denji tansa (MT kan'i ho) hokokusho - No.30 Hakkoda seibu chiiki - 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-01-01

An electromagnetic surveillance using the simplified MT (magnetotelluric) method was conducted to help clarify the geothermal structure in the western part of the Hakkoda area, Aomori Prefecture. The survey covered approximately 60 km{sup 2,} and involved 38 survey points, 3 magnetic field components, 2 electric field components, not less than 10 measuring frequencies in the range of 0.01-125 Hz, and a measuring time of not less than 2 hours. An analysis was performed, with data previously collected at 60 points added to the data collected at the said 38 points. As the result, the resistivity structure in this area was divided into 3 layers of high-low-high as described from the surface to the depth, and the middle layer was further divided into 3 layers of high-middle-low and the bottom layer into 2 layers of high-low. The result conformed though roughly to the result obtained by the electrical logging carried out in the structure boring. In the geothermal zone including the Sukayu hot spa in the southeastern part of this area and along the Jogakura valley, there exist a complicated resistivity structure attributable to geothermal activities and a number of discontinuous lines of resistivity running in the directions of WNW-ESE and N-S. This enabled an inference that there is a deep-seated geothermal source between Odake and Akamizusawa extending eastward from the said geothermal zone. (NEDO)

Fiscal 1998 geothermal development promotion survey. Annex to on-the-ground survey report, geothermal development promotion survey (Part 2. Electromagnetic surveillance using simplified MT method - No. 30: Western part of Hakkoda area); 1989 nendo chinetsu kaihatsu sokushin chosa. Chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo (Denji tansa (MT kan'i ho) hokokusho - No.30 Hakkoda seibu chiiki - 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-01-01

An electromagnetic surveillance using the simplified MT (magnetotelluric) method was conducted to help clarify the geothermal structure in the western part of the Hakkoda area, Aomori Prefecture. The survey covered approximately 60 km{sup 2,} and involved 38 survey points, 3 magnetic field components, 2 electric field components, not less than 10 measuring frequencies in the range of 0.01-125 Hz, and a measuring time of not less than 2 hours. An analysis was performed, with data previously collected at 60 points added to the data collected at the said 38 points. As the result, the resistivity structure in this area was divided into 3 layers of high-low-high as described from the surface to the depth, and the middle layer was further divided into 3 layers of high-middle-low and the bottom layer into 2 layers of high-low. The result conformed though roughly to the result obtained by the electrical logging carried out in the structure boring. In the geothermal zone including the Sukayu hot spa in the southeastern part of this area and along the Jogakura valley, there exist a complicated resistivity structure attributable to geothermal activities and a number of discontinuous lines of resistivity running in the directions of WNW-ESE and N-S. This enabled an inference that there is a deep-seated geothermal source between Odake and Akamizusawa extending eastward from the said geothermal zone. (NEDO)

Reports on 1981 result of Sunshine Project. Research on conditioning required for industrialization of new energy technology (summary); 1981 nendo shin energy gijutsu kigyoka ni hitsuyona joken seibi ni kansuru chosa kenkyu. Yoyakuhen

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

In order to decide measures for introducing new energy to the society, the work starts from the investigation of the present state of energy demand, examining feasibility of introducing new energy into the state, and then assuming concretely the circumstances in which new energy is brought into the society to some extent. In the subject research, with 1990 set as a target year, the following examinations are carried out for the purpose of estimating the state of introducing new energy to the Japanese society at such point in time. (a) Feasibility is studied of substituting with new energy on oil users' part at present, with an estimate made on the state of new energy introduction in fiscal 1990. (b) An energy flow analysis is made for the purpose of checking interrelation between the total energy demand structure in Japan and the quantity of introducing new energy as of 1990. (c) On the basis of these results, current various energy-related laws and regulations are reviewed, with policies examined for introducing and promoting new energy. (d) On-site investigation is conducted on relationship with the energy policy of coal producing countries, in the case where a coal liquefaction plant is constructed in such countries and where overseas operations and imports of liquefied oil production are implemented. (NEDO)

Reports on 1981 result of Sunshine Project. Research on conditioning required for industrialization of new energy technology; 1981 nendo shin energy gijutsu kigyoka ni hitsuyona joken seibi ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

This research was intended to establish foundation for the coming new energy era, by clarifying all interfering elements and taking counter measures, in further spreading and promoting the new phase of new energy technology development under the Sunshine Project. With the public section as the main body, studies were made in the technological aspect as well as the legal/institutional aspects, and also an investigation was conducted of the cases of introducing new energy from overseas. In the subject research, with 1990 set as the target year, the following examinations were carried out for the purpose of concretely estimating the situation of introducing new energy into the society in Japan at such point in time. The examinations were to study the feasibility of substitution with new energy in fiscal 1990 on the present level of oil consumption; to extract problems on the basis of the results and examining a policy of introducing and promoting new energy; and, to investigate on the spot, as a case study in building a coal liquefaction plant in a coal production area overseas, a relation with the energy policy of the producing country in implementing the overseas operation and importation of liquefied oil so produced, etc. (NEDO)

Enhancement of condensation heat transfer using electric field. Effects of wire-electrode coating; Denba ni yoru gyoshuku netsu dentatsu no sokushin ni kansuru kenkyu. Wire denkyoku no hifuku koka

Energy Technology Data Exchange (ETDEWEB)

Chu, R. [Gifu University, Gifu (Japan). Faculty of Enginering; Nishio, S. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Tanasawa, I. [Nihon University, Fukushima (Japan). College of Engineering

2000-08-25

In the present paper, an attempt is made to develop an effective EHD enhancement technique for condensation heat transfer of steam around a horizontal finned tube. The main idea in the present study is to reduce the power consumption by using a partially coated electrode, and the experimental data of heat transfer coefficients and flooding angles are presented. The result indicates that, by using such an electrode, the enhancement ratio keeps almost the same level with that of a bare electrode but the power consumption can be markedly decreased. Within the present experimental range, the condensation heat transfer coefficient on the finned tube with the partially coated electrode reaches a value about 3 times larger than that without electrode. In addition, a model in presented for the EHD effect on the flooding angle and it is confirmed that the prediction from the model is in good agreement with the experimental data. (author)

Achievement report for fiscal 1999 on development of 'technology to promote diversification of secondary aluminum alloys'; 1999 nendo aluminium saisei jigane tayoka sokushin gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Discussions were given on aluminum scraps anticipated to be generated in a great quantity mainly from automobiles in the future, with an objective to apply secondary aluminum alloys to automotive field. In the study on alloy contents and characteristics of regenerated aluminum lumps, 5182 and 5052 alloys for automobile structure members and 6000 alloy for panel use were selected as the object. Cast lumps were manufactured on a trial basis varying the concentrations of impurity elements assumed to be mixed into the regenerated material, such as Fe, Si, Zn, and Cu, as well as their cooling speeds. Subsequent processes including rolling were proceeded to evaluate the material properties. These activities have resulted in accumulation of the basic data. For the welding technology on regenerated aluminum material, studies were performed on YAG laser welding. Applicability of the regenerated material as the automobile structure members was recognized by optimizing the basic welding conditions and the basic construction conditions according to each part to be structured. In order to clarify the positioning of the regenerated metal as a resource, investigations were performed on demand trends in the aluminum scrap material, and its recycling trends. (NEDO)

FY 2000 report on the results of the R and D of fundamental technologies for semi conductivity applications; 2000 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

In relation to the project on the R and D of fundamental technologies for semi conductivity applications, the FY 2000 results were summed up. As to the study of the high temperature superconductivity mechanism, it was found out that a theoretical model of the strong scattering limit in d-wave superconductor can be used for the breaking of superconductivity due to Zn impurities. Concerning the study of the critical current mechanism, the elucidation was proceeded with of the magnetic flux pinning and grain-boundary conduction mechanism. Relating to the development of element technology of bulks with great electromagnetic force, the mechanical strength of superconducting bulk materials was raised to 100MPa or more by the epoxy resin impregnation method. As to the development of the basic technology for fabrication of high next-generation current conductors, the expansion was confirmed of conditions for growing single grains in the zone-melt process for very fine filaments. About the development of technology of single crystal substrates, in the development of the pseudo single crystalline film growth process by LPE method, a yield ratio of high quality crystal of 63% was achieved. Concerning the development of technology of thin film/multi-layer, the area of uniform composition/thickness of NdBa{sub 2}Cu{sub 3}O{sub 7-x} MOCVD films was enlarged up to 20mm square. (NEDO)

Effect of surface irradiation during the photo-CVD deposition of a-Si:H thin films. Hikari CVD ho ni yoru amorphous silicon sakuseiji no kiban hikari reiki koka

Energy Technology Data Exchange (ETDEWEB)

Tasaka, K.; Doering, H.; Hashimoto, K.; Fujishima, A. (The University of Tokyo, Tokyo (Japan))

1990-12-06

This paper shows the impact of the irradiation from an additional light source during the deposition of hydrogenated amorphous silicon by photo-CVD deposition. Using a mercury sensitized photo-CVD process from Disilan (Si {sub 2} H {sub 6}) and hydrogen, silicon was deposited. A 40W low pressure mercury lamp was applied as the light source. A portion of the substrate was in addition irradiated using an Xg-He lamp through a thermal filter. Irradiation of the substrate using only Xg-He lamp produced no deposition, since this light has a wavelength which is too long to produce the SiH {sub 3}-radicals needed for Si deposition. The additional Xg-He light source was discovered to cause an increased thickness of deposited a-Si:H film and a transmission of the band structure. The reasons of these are considered that the influence of irradiation is not limited to film thickness, but that irradiation also impacts the composition of the a-Si:H film so as to cause a reduction in the hydrogen content. 10 figs., 1 tab.

Research, development, and evaluation of basic technologies for next-generation industries. Technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu hyoka. Saibo tairyo baiyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-03-01

The project aims to establish basic technologies for the mass culture of cells by utilizing the features of animal cells, which will enable a large, stable supply of fine chemicals such as highly functional physiologically active proteins whose industrial production the conventional technique of synthesis fails to realize. For this purpose, efforts are exerted to select cells which are capable of producing target substances, to breed highly productive strains, to develop a serumless medium that satisfies demands for an all-purpose feature and heat sterilization, and to develop technologies of high-density culture and effective refining, etc. Some DNA (deoxyribonucleic acid) recombination technologies are also resorted to. As the result, a high-density culture of 2 times 10{sup 8} cells/ml has become available. Production is now feasible of various differentiation-inducing elements such as monoclonal antibodies with anti-HB virus activity, DIF, etc. Furthermore, cooperation with the Tsukuba University leads to the discovery of a novel vasopressor peptide (endothelin). The heat sterilization accepting serumless medium, which is put to practical use as the first of the kind in the world under this research and development project, contributes to the advancement of basic studies about cell biology. (NEDO)

Research Foundation Institute Joint Symposium '97. Ion, marine biotechnology, microgravity, ultrahigh temperature, and laser; Kenkyu kiban shisetsu godo symposium '97. Ion kaiyo bio mujuryoku chokoon laser

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-10

Presentations were jointly made by NEDO (New Energy and Industrial Technology Development Organization)-financed Ion Engineering Center Corporation, Research Center for the Industrial Utilization of Marine Organisms, Japan Microgravity Center, Japan Ultrahigh Temperature Materials Research Institute, Applied Laser Engineering Center, and organizations annexed to them. The subjects taken up were 'Omnidirectional ion beam technology and titanium ion implantation,' 'Application of ion engineering technology to the prevention of contact allergy,' 'Research on metal/semiconductor transition phase creation for silicon ions,' 'Research on technologies of microalgae-aided CO2 fixation and effective utilization,' 'Construction of gyrB database,' 'Marine microbe-produced antibiotics and assessment of activity,' 'Research on combustion under microgravitational conditions and application to industrial combustors,' 'Research on tube-contained gas/liquid two-phase fluid under microgravitational conditions and application to power generation boiler,' 'Measurement of physical properties of molten semiconductor under microgravitational conditions and research on analysis of heat flow in silicon crystal growing furnace,' 'High temperature oxidation of Mo(Si, Al){sub 2} intermetallic compounds,' 'Development of Nb-based ultrahigh temperature materials,' 'Functional characteristics of Al{sub 2}O{sub 3}/TiC/Ni-based functionally inclined materials,' 'Control of epitaxial crystal growth in CxBE process,' and 'Manufacture of intermetallic compounds by laser plasma hybrid spraying and characteristics.' (NEDO)

Achievement report for fiscal 1982 on Sunshine Program. Survey and research on preparation of conditions for industrializing new energy technologies; 1982 nendo shin energy gijutsu no kigyoka joken seibi ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-01

Examined in this report are problems related to new energy that may arise in the energy supply/demand environment in 1990 when new energy will be introduced. This report consists of Chapter 1 about problems to solve before the introduction of new energy into the fields of industry and transportation, Chapter 2 about the analysis of a model of the supply/demand structure and ripple effects of the introduction of new energy technologies, and Chapter 3 about the analysis of laws and systems for the introduction of new energy technologies. In this research, concrete systems for utilization are presumed, and problems are sought out based on these presumed systems. Several utilization systems for each of the technologies are placed against the demands in the fields of transportation and industry, and problems in presence in this process are sought out, and examined. Viewpoints mentioned below are taken into consideration when seeking out problems. The viewpoints are (1) the establishment of technologies to utilize, (2) problems in the legal system, (3) problems about siting, and (4) problems in accelerating new energy diffusion. Chapters 1 and 2 deal with analyses based on Viewpoint (1), and Chapter 3 deals with analyses into problems sought out based on Viewpoints 2-4. (NEDO)

Fiscal 1997 survey report. 2. Survey on the preparation of technical information in the APEC region (downstream field); 1997 nendo chosa hokokusho. 2. APEC ikinai ni okeru gijutsu joho seibi ni kakawaru (karyu bun`ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The Japanese government is conducting the training on the CCT downstream field for the persons concerned in the CCT utilization field in the APEC region, especially in nations as new comer into the CCT utilization field where the coal consumption is expected to rapidly increase (China, Indonesia, Thailand, and the Philippines). The demand for CCT diffusion/education to the persons concerned in coal utilization in the APEC region is increasing from each country, and the CCT diffusion/education is becoming a more and more important issue. Accordingly, for the purpose of increasing the understanding of CCT and improving the ability of the persons concerned in APEC countries, the paper surveyed and arranged the environmental protection technology out of the CCT technical information of Japan, and inputted the results into CD-ROM. The results are planned to be used for the understanding of Japan`s advanced CCT and ability improvement in the CCT training course to be planned for managers and engineers from APEC countries. The CD-ROM includes the coal combustion flue gas related technologies such as desulfurization technology, denitrification technology and dust collecting technology which are the environmental protection technology out of the coal utilization technologies in Japan

Fiscal 1996 survey for the upgrading of the Asia/Pacific coal development. Survey of the coal infrastructure propagation in Indonesia; 1996 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia ni okeru sekitan infura seibi chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

Phase 1 survey in fiscal 1996 was conducted based on `Agreement on the comprehensive survey of a coal transportation system in South Sumatra` concluded between NEDO and the Ministry of Mine and Energy in Indonesia. In the survey, conducted were collection of data on coal fields and site surveys, collection of data on inland transportation and site surveys, collection of data on harbors and site surveys, and worked out were a simplified database and a coal transportation plan by optimization of the coal chain system. The area for survey is the periphery of the Musi River of South Sumatra. The results of the simulation by LP models were as follows: When the coal of Bukit Asam coal mine is $25/t in price, only coal of 5500Kcal/kg is profitable, and when $27/t in price, coal of 4500Kcal/kg also becomes profitable. This shows that if the coal is of good quality, it can pay arriving at Suralaya, independent of the distance of transportation. 47 figs., 63 tabs.

Fiscal 1999 geothermal energy development promotion survey. Report on environmental impact survey - 5 (Musadake area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.B-5 Musadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

For the purpose of clarifying the environmental impact to result from the digging of borehole N11-MD-3 in Shibetsu-gun, Hokkaido, a survey was conducted of changes in (1) hot spring water quality, (2) noise/vibration pollution, and (3) air pollution due to hydrogen sulfide, before and after the digging period. Under item (1), measurements were made at four hot springs, which involved weather, air temperature, water temperature, amount of welled-up water, pH, electric conductivity, etc. Although minor changes were observed during the measuring period, none was found related to the digging process. Under item (2), noise levels were measured during the drilling period along the site boundary, at a point 500m from N11-MD-3, the Kawakita hot spring, and the entrance of Sekiyunosawa. Along the site boundary, they were 55-60 dB during the drilling period, and there was an increase of 30dB attributable to the drilling. At the 500m point, there was a 15-20dB increase attributable to the same. Vibration levels during the drilling period were 40dB along the site boundary and less than the observable minimum at the other points. Under item (3), at four points along the site boundary (50m), hydrogen sulfide concentration in the air fluctuated by 0.01-0.21ppm when the steam discharge rate was 4.47-7.20t/h. (NEDO)

Study of promotion of CO2 fixation by the environmental improvement in the coral reef area; Kansho chitai ni okeru kankyo kaizen ni yoru CO2 kotei sokushin no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Maruoka, T.; Ishitani, H.; Matsuhashi, R.; Yamada, K.; Komiyama, H.; Kraines, S. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

1997-01-30

A study was conducted on how to fix CO2 in the ocean using coral reefs. Coral reefs have extremely high primary productivity ( production quantity of organic matters by photosynthesis) and are expected to be resources to fix CO2 when the quantity of photosynthesis exceeds the quantity of CO2 emitted in association with formation of calcium carbonate skeleton. If organic substances produced in coral reefs are well carried into the open sea, those are settled down on deep beds, which enables the storage into the ocean. At the coral reef floating in the ocean, it is not very deep inside and the seawater stays there, but it has a steep depth outside. By the numerical calculation, an examination was made on how the waterflow changes when making the flow path of seawater between the inland sea and open sea. From the actual calculation of an atoll, it was found that seawater comes in and out from the open sea to the inland sea near the opening of the atoll in accordance with the high tide and ebb tide, but the water stays at the deep bottom of the atoll. When installing a channel with a 10m depth at the portion where the water flows softly, the seawater was actively exchanged. 6 refs., 4 figs.

Surveys for promoting development of overseas coals in fiscal 1999. Surveys on international coal situation; 1999 nendo kaigaitan kaihatsu kodoka nado chosa (kaigaitan kaihatsu sokushin chosa). Kokusai sekitan jijo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Detailed surveys were performed on Britain, Germany and Spain being the major coal producing countries in Europe with regard to a general view on the status of energy demand and supply, the status of demand and supply of coal, business institutions, and related policies in each country. The status of demand and supply of coal, and related policies in the three countries may be summarized as follows: In Britain, the ratio of coal accounted for in the primary energy supply is 18.0% in 1998, and the coal production amounted to 35.5 mill.TCE/year; closure of underground mining coal mines is discussed recently; the congress is deliberating re-introduction of the subsidy system which had been once discontinued; in Germany, the ratio of coals accounted for in the primary energy supply in 1997 was 14% in bituminous coal and 11% in brown coal; the quantities of production of bituminous coal and brown coal in 1998 were 41.8 and 50.6 mill.TCE/year, respectively; the number of mines has decreased because of the unification; the subsidy policy is in continuation; in Spain, the ratio of coal accounted for in the primary energy supply was 13.5% in 1997 and the quantity of coal production in 1998 was 12.5 mill.TCE/year; unification of coal operators has not been advanced as far as in Germany; and the subsidy is provided as in Germany. (NEDO)

FY 1998 annual report on the leading fundamental research and development of AC superconducting power apparatuses (New Sunshine Project); 1998 nendo koryu chodendo denryoku kiki kiban sendo kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In order to propose fundamental research and development of AC superconducting power apparatuses, the FY 1998 efforts were directed to studies on the effects of introducing superconducting apparatuses, making proposals of development programs, literature (including patent publications) surveys on trends of research and development at home and abroad, and making proposals for technological breakthroughs. Results of the studies for evaluating economic efficiency of these apparatuses and the effects of their introduction indicate that the promising apparatuses for eventual commercialization include superconducting cables, current limiters, field power generators, transformers and flywheels. The superconducting cables are expected to greatly reduce losses and hence CO2 emissions. The superconducting current limiters are promising means to control short-circuit current increase in the trunk power systems in which they are used. The superconducting transformers are expected to reduce losses and hence CO2 emissions. The project of fundamental research and development of AC superconducting power apparatuses has proposed the fundamental technological research themes aimed at development of the elementary techniques prerequisite for realizing these 3 types of apparatuses and reflection of the required apparatus specifications in development of the cable materials. (NEDO)

Fiscal 2000 research and development of in-vehicle information platform technology for advanced information-oriented age; 2000 nendo kodo johoka taiogata shanai joho kiban gijutsu kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts were made to develop an in-vehicle information platform for dealing with any systems imagined to be introduced in the period 2003-2008 to and for enabling seamless networking for communication at both inside and outside the vehicle without specifying equipment terminals. In developing specifications for describing the function of in-vehicle equipment, efforts were made to develop primary in-vehicle terminals and carry-in portable equipment on the assumption of ITS (Intelligent Transportation System) application. Efforts were made to develop common specifications for communication, such as communication specifications suitable for in-vehicle LAN (local area network) centering on a network transport layer, OEM(Original Equipment Manufacturing)-OPEN gateway specifications for certification and access control, and connection interface specifications for carry-in portable equipment. Moreover, connection specifications for control systems and information LAN were developed. Verification tests were conducted relative to the assurance of communication between in-vehicle equipment, carry-in portable equipment, and external networks; assurance of communication between in-vehicle equipment and carry-in portable equipment supplied by different vendors; and the assurance of safe connection between control systems and information transmitting LAN systems. (NEDO)

FY 1997 report on the survey of fundamental technologies in the field of brain neuro-biotechnology; 1997 nendo Sendo kenkyu hokokusho (noshinkei saibo kogaku kiban gijutsu no chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In Japan with its rapidly aging society, fundamental technologies are required for the development of artificial nerves substituting for or supporting damaged ones, and ultimately constituting artificial neurons based on the knowledge of the brain functions at the molecular and cellular levels. This study defines the fundamental technologies which would be required for the development in the area, and further, evaluates the potential of the technologies to develop the novel industry. The brain function is closely related to the activity in neuronal circuits. In order to repair injured nerves and to develop the advanced technologies of electronics for helping impaired neuronal functions, the most important and urgent is to understand how to work the neuronal circuit system in the brain. Based on these viewpoints, new methodological approaches would make it possible to relieve neural impairment in the sensory input system and the motor system by the use of electronic circuits. They also would improve rehabilitation after injury, and treat neurodegenerative diseases such as Parkinson`s disease. These advances surely create the new types of industry seeds in near future. 77 refs., 29 figs., 2 tabs.

FY 1999 report on the results of the R and D of high efficiency clean energy vehicles; 2000 nendo choteisonshitsu denryoku soshi gijutsu kaihatsu seika hokokusho. Kiban gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Using the petroleum substituting clean energy, the R and D were conducted with the aim of developing vehicles which reduce the consumption of travel energy to 1/2 and the CO2 emission to 1/2 or below of those of existing vehicles. The FY 1999 results were summed up. As to the R and D of the hybrid power system, carried out were the prediction of fuel consumption performance by numerical simulation, evaluation of performance of new hybrid electric vehicles, etc. Concerning the R and D of high efficiency clean energy vehicles, the R and D of the following were reported from each of the makers: hybrid passenger car loaded with methanol fuel cells, hybrid passenger car loaded with ANG engine, hybrid truck loaded with CNG ceramic engine, hybrid truck loaded with CNG engine, hybrid bus loaded with LNG engine, and hybrid bus loaded with DME engine. Further, in the survey of synthetic fuels, the paper reported on the results of the evaluation of synthetic light oil engines and evaluation of characteristics of synthetic light oil. (NEDO)

Report on the achievements in the Sunshine Project in fiscal 1987. Investigative studies on arranging commercializing conditions for new energy technologies; 1987 nendo shin energy gijutsu no kigyoka joken seibi ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The present investigative studies are intended to propose measures of arranging conditions required to commercialize new energy technologies and introduce them into societies. The investigative studies will begin in the current fiscal to put into a complex the new energy industrial plants and the existing different industrial plants. There is a viewpoint that, when structuring specifically a business entity on coal liquefaction processes, some kind of complex is required as seen from the scale and economic performance of the business. Based on this viewpoint, the current fiscal year has carried out the studies placing the importance on technological feasibility for forming a complex with petroleum refining, iron and steel making, chemical and electric power generation industries. The model coal liquefaction plant uses the NEDOL method as the process, and establishes specifications for commercial size plants. The complex formation was discussed with the commercial scale of a coal liquefaction plant assumed to be 30,000 tons per day as the coal treatment quantity and 100,000 barrels per day as the product quantity converted into refined coal liquefied oil. As a result, a conclusion was drawn that, when the complex formation has been done successfully, an attractive business pattern may be formed although some problems may exist. (NEDO)

Fiscal 1999 research on geothermal energy development promotion. Research report on development feasibility (Strategic survey - nationwide survey); 1999 nendo chinetsu kaihatsu sokushin chosa hokokusho. Kaihatsu kanosei chosa (senryakuteki chosa zenkoku chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

Analysis and assessment were conducted for each of promising geothermal regions over large areas so as to contribute to the drafting of survey implementation plans and estimation of the amounts of recoverable geothermal reserves under the geothermal energy development promotion project. In this fiscal year, based on the manual compiled in the preceding fiscal year, studies were made on the six areas, which were the eastern part of Hokkaido, Toyoha-Niseko area, Iburi area, Bandai-Azuma area, Minamiaizu-Nasu area, and the island area. In region 1 in the eastern part of Hokkaido, a 48km{sup 2} was extracted in the vicinity of Mount Musa, with the amount of resources per 1km{sup 2} estimated at 12.34-56.02MWe. In region 2 in the eastern part of Hokkaido, promising geothermal regions I, II, III, and IV were extracted, with the amounts of resources per 1km{sup 2} estimated at 50MWe or more at III and part of IV. In the Toyoha-Niseko area, promising regions I and II were extracted, the amounts of resources estimated at 50MWe or more in both regions. For the Iburi area, it was concluded that there was a probability of not less than 90% that the amount of resources was 50MWe or more and it was proposed that an additional survey be conducted. As for the Bandai-Azuma, Minamiaizu-Nasu, and island areas, need of further surveys was pointed out. (NEDO)

Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region; Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The International Symposium `98 on the industrial waste problem in the Asian region was held in Tokyo on February 18, 1998. MITI commented on the present situation of the industrial waste problem in Japan and Japan`s environmental tackling toward the Asian region, and also Asian countries (China, the Philippines, Thailand and Korea) made reports. Japan reported on environmental preservation measures taken in the industrial circle, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention (which restricts border-crossing movement of harmful wastes) on recycle activities, Japan`s role in Asia, etc. In the panel discussion, discussions were made on human interchange in the informatization, recycling technology, shortage of personnel concerned with environmental protection, construction of a network in the Asian region and Japan` s role, etc. As to the treatment system for waste, the necessity was recognized of studying systems which meet with actual states of each country. It is also necessary to go on with discussing how the system should be for cooperation between governments and private companies. Importance of the recycle and information exchange was emphasized. 10 refs., 14 figs., 27 tabs.

Leading research report for fiscal 1998 on the report on researches on intelligent social infrastructure technology; 1998 nendo chiteki shakai kiban kogaku gijutsu no chosa kenkyu hokokusho sendo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Researches are conducted for showing some guidelines on the system and method of the intelligent social infrastructure technology (ISIT) as a 21st century type systematization technology, and a report is submitted on the result. Discussed in the report are the technological system and image of ISIT, the research and development setup and administrative tasks involving intelligent social infrastructure construction, and the systematization and operation of the ISIT. Mentioned as important element technologies are the infrastructure and information/communications technologies for security and disaster prevention, information technology and automatization technology for maintenance, and intelligent materials enabling disaster prediction and detection. Stated in connection with the future development of ISIT are information/communication technologies for system control, monitoring, and normal/urgent dual use. Specific examples are shown, such as the active card, urban disaster prevention and monitoring system, active city, intelligent network, and so forth. (NEDO)

Ultimate evaluation report on research and development of basic technologies for next-generation industry. Conductive polymeric materials; Jisedai sangyo kiban gijutsu kenkyu kaihatsu saishu kenkyu kaihatsu hyoka. Dodensei kobunshi zairyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-05-01

Basic technologies are established that equip polymeric materials (insulators in general) with conductivity similar to that of metals for the realization of novel conducting materials characterized by light weight, high resistance to corrosion, and ease of machining, and for the manufacture of novel electrical/electronic materials having new functions different from those of conventionally used metals. The aims are to realize a conductivity of 10{sup 5}S/cm or more, to manufacture materials sufficiently stable when left in the ordinary or inert atmosphere, and to manufacture materials which may be machined into proper shapes as required in the industry. The results of the 10-year-long development endeavor greatly contribute to the creation of high-level materials, the systematization of technologies, and the elucidation of the conducting mechanism. In relation to polymeric materials, in particular, a new technology is developed that equips, with high reproducibility, polymeric materials with conductivity similar to that of silver or copper; a graphitic material is created for the first time provided with conductivity superior to that of metals; and conducting polymeric materials are equipped with an easy-to-machine feature. A great contribution is accomplished to the production of superconductivity in organic charge-transfer complex crystals and to the elucidation of the conducting mechanism. (NEDO)

Achievement report for fiscal 1999 on New Sunshine Program. Frontier research and development of basic superconductive AC power generation equipment; 1999 nendo koryu chodendo denryoku kiki kiban sendo kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As part of the New Sunshine Program of the Agency of Industrial Science and Technology, a 2-year survey and research is conducted beginning in 1998 on the effect of the introduction of superconductive power equipment for the facilitation of the progress of research and development of basic power equipment which utilizes AC (alternating current) superconductivity. Frontier research and development has been started of basic AC superconductive power equipment for clarifying the tasks to solve in the development effort and for preparing an efficient research and development plan. This fiscal year's endeavor covers the survey of the effect of the introduction of superconductive power equipment in addition to the preparation of a basic plan for the research and development of basic AC superconductive power equipment for fiscal 2000 and afterward, continued survey of research and development trends in and outside Japan for the review of the result achieved in the preceding fiscal year, development of AC equipment element technologies utilizing conduit type semiconductors as a basic study for the embodiment of AC superconductive equipment, and a study for elucidating the mechanism of resistance generated in a superconductive current limiter. Furthermore, papers on the superconduction technology released so far are investigated, and technology development trends and efficient research techniques are put together into a technological information database. (NEDO)

Leading research report for fiscal 1998 on the research of basic technologies of cranial nerve cell engineering; 1998 nendo noshinkei saibo kogaku kiban gijutsu no chosa kenkyu sendo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Researches are conducted about the present and future of the research and development of elementary technological details for elucidating, from the viewpoint of the level of molecules or cells, the functions of neurons which are the basic elements of the cranial nerve circuit and for applying the results to cranial nerve cell engineering. It is then concluded that the most important and urgent is to 'develop basic technologies for understanding the functions of neural circuits so that a remedial step may be taken in the presence of a defect in a neural circuit and that electronic devices may be applied to help neural functions.' It is agreed that the most immediate and ripple-effective is to 'establish the technology of intelligent connection between electronic devices and neural circuits for the reconstruction of motor functions.' It is also concluded that, upon achievement of the above two goals, new basic technologies will become available for the moderation of problems in the sensor input and motor output systems by means of electronic circuits, for the improvement on efficiency of rehabilitation with the aid of electronics, for the cure of denatured nerves or a damaged spinal cord, for the study of neural circuits, etc., and that a new industrial series will be created through the utilization of the above-mentioned details. (NEDO)

Leading research report for fiscal 1998 on the research of basic technologies of cranial nerve cell engineering; 1998 nendo noshinkei saibo kogaku kiban gijutsu no chosa kenkyu sendo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Researches are conducted about the present and future of the research and development of elementary technological details for elucidating, from the viewpoint of the level of molecules or cells, the functions of neurons which are the basic elements of the cranial nerve circuit and for applying the results to cranial nerve cell engineering. It is then concluded that the most important and urgent is to 'develop basic technologies for understanding the functions of neural circuits so that a remedial step may be taken in the presence of a defect in a neural circuit and that electronic devices may be applied to help neural functions.' It is agreed that the most immediate and ripple-effective is to 'establish the technology of intelligent connection between electronic devices and neural circuits for the reconstruction of motor functions.' It is also concluded that, upon achievement of the above two goals, new basic technologies will become available for the moderation of problems in the sensor input and motor output systems by means of electronic circuits, for the improvement on efficiency of rehabilitation with the aid of electronics, for the cure of denatured nerves or a damaged spinal cord, for the study of neural circuits, etc., and that a new industrial series will be created through the utilization of the above-mentioned details. (NEDO)

FY 1999 Report on feasibility research and development for next generation liquid crystal process basic technologies; 1999 nendo jisedai ekisho process kiban gijutsu ni kakawaru sendo kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Described herein are the FY 1999 results of the feasibility study on the next generation liquid crystal processes. Technology for low-temperature thin film formation fabricates high-purity, high-density Si films useful as the laser annealing (crystallization) precursor by the IBD method, without using thermal annealing. Formation of thin films of a-Si and SiNx on substrates kept at 200 degrees C or lower is studied using a high-density plasma source, and the surface conditions are uniformly controlled over a large area of the film precursor. The new technology needs less power to produce the film than the conventional CVD method which uses parallel flat plates by controlling the plasma-generating region. Resources- and energy-saving using the TFT method are essential for production of liquid-crystal displays, and the techniques for forming the thin films at low temperature are studied. Reduction in wiring resistance (signal transmission delay) is studied for the next generation TFT, and it is found that the Cu film is selectively formed on TiN but not on SiO{sub 2} by the MOCVD method at 150 to 180 degrees C. Similarly, the selective film formation is confirmed in the plating technology. The comprehensive investigations for the next generation liquid crystal process technologies cover high-quality polycrystalline Si films and lithography (exposed to light). (NEDO)

Achievement report for fiscal 1999 on New Sunshine Program. Frontier research and development of basic superconductive AC power generation equipment; 1999 nendo koryu chodendo denryoku kiki kiban sendo kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As part of the New Sunshine Program of the Agency of Industrial Science and Technology, a 2-year survey and research is conducted beginning in 1998 on the effect of the introduction of superconductive power equipment for the facilitation of the progress of research and development of basic power equipment which utilizes AC (alternating current) superconductivity. Frontier research and development has been started of basic AC superconductive power equipment for clarifying the tasks to solve in the development effort and for preparing an efficient research and development plan. This fiscal year's endeavor covers the survey of the effect of the introduction of superconductive power equipment in addition to the preparation of a basic plan for the research and development of basic AC superconductive power equipment for fiscal 2000 and afterward, continued survey of research and development trends in and outside Japan for the review of the result achieved in the preceding fiscal year, development of AC equipment element technologies utilizing conduit type semiconductors as a basic study for the embodiment of AC superconductive equipment, and a study for elucidating the mechanism of resistance generated in a superconductive current limiter. Furthermore, papers on the superconduction technology released so far are investigated, and technology development trends and efficient research techniques are put together into a technological information database. (NEDO)

Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

Overall analysis report on the fiscal 1994 geothermal development promotion survey. No.C-2. Wasabizawa area (secondary); 1994 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No.C-2. Wasabizawa chiiki (dainiji)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-01-01

The Wasabizawa area is located near the boundary between Yuzawa city south of Akita pref. and Ogachi-machi, Ogachi-gun, Akita pref, having a range of 3.0km northeast-southwest and 2.5km northwest-southeast of Wasabizawa almost as a center. The area for survey and its circumference are national forests, and the east and a part of the south of the area are designated as the Kurikoma quasi-national park third type special region. From the geochemical temperature distribution, it can be assumed that geothermal fluids of around 300{degree}C exist in the deep underground of the Kaminotai-Wasabizawa-Akinomiya area. From the distribution of density basements, the block structure of the basement can be estimated. Around the boundary of the ridge/sedimentation region of this density basement, fractures develop and the formation of reservoir structure is expected from the comparison with the result of the well survey. In the blowout test, obtained were 284.3{degree}C and 83.05 kgf/cm{sup 2} at a depth of 1,300m. In the geothermal system, it is assumed that reservoir structures of geothermal fluids develop in the deep underground of the central part of the area. The heat source to the geothermal system is supposed to be the magma reservoir remaining in Takamatsudake volcanic rocks. 110 refs., 177 figs., 105 tabs.

Fiscal 1999 survey report. Survey of environmental effect pertaining to survey for geothermal development and promotion (Hakusuigoe area); 1999 nendo chinetsu kaihatsu sokushin chosa no uchi kankyo eikyo chosa (Hakusuigoe chiiki) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This survey of environmental effect was intended to grasp actual state concerning some environmental factors that should agree with survey/development and also to assess its effect on the surrounding environment, particularly as a part of the 'stage C' in the 'survey for geothermal development and promotion', which was implemented by the Government for the purpose of guiding geothermal development by enterprises. This report compiles the plan details of the environmental effect survey to be conducted in the Hakusuigoe district, and presents proposals. The survey area is in the north of Makizono-cho, Aira-gun, in Kagoshima prefecture and situated about 3 km west of Onaminoike in Karakunidake, one of the peaks in the Kirishima mountain range. The Ogiri geothermal power plant is in the west of the site, a tourist spot Ebino Heights about 4 km northeast, and the Kirishima hot-spring about 4 km southeast. The location is in the national park, with a part designated as No. 2 and 3 class special areas. The environmental effect survey was divided broadly into such categories as fauna/flora, hot-spring water alteration and inland water, landscape, noise/vibration/subsoil, and air/water, and was further subdivided in accordance with the actual operations. (NEDO)

Report on fiscal 1995 project to promote an exchange of researchers on environmental problems in the Asia-Pacific region; 1995 nendo itakujigyo (Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

For the purpose of solving environmental problems caused in association with the increasing industrial activities in the Asia-Pacific region, the construction of a research network is being advanced aiming at promoting exchanges with researchers of other countries and activating information exchanges. Investigators were sent overseas to grasp the present situation, and researchers participated in a symposium on the APEC environmental technology cooperation for mutual understanding and personal interchange. In the overseas survey, visits were paid mainly to national research institutes and universities in India and Thailand. Positive approval was obtained on the construction of the ETERNET APR (Environmental Technology Research Network in the Asia-Pacific Region). In the symposium on the APEC environmental technology cooperation held in Nagoya, researchers participated mostly in the second session and made earnest discussions with researchers from other countries. The necessity and importance of the network was emphasized. Countries which participated the symposium have problems common to each, and it was greatly significant to meet together and discuss together. The environmental problem is on a global scale, and it is necessary to make close exchange/interchange of information/opinion on a long term basis and to tackle it in the whole Asia-Pacific region. 3 tabs.

FY 1996 geothermal development/promotion survey. Report of hot water survey results (No. B-3 Kumaishi area); 1996 nendo chinetsu kaihatsu sokushin chosa. Nessui no chosa hokokusho (No.B-3 Kumaishi chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

Reported herein are the survey results of hot water in the Kumaishi area, Hokkaido, as part of the FY 1996 geothermal development/promotion survey project. A total of 277 spouting guidance tests were conducted by the swabbing method for 10 days at the N7-KI-1 well, which, however, failed to achieve continuous spouting of geothermal fluid. A total of 144 swabbing tests were conducted for 8 days at the N7-KI-2 well. The geothermal fluid is spontaneously spouted out, although intermittently, after the main valve was opened, because it had a pressure of 4.1 kg/cm{sup 2} G at the mouth of the well from the first. However, the final self-spouting quantity remained unchanged in spite of the guidance works. The hot water had a pH 6.4, and contained Na as a cation at 8,940 mg/L and Cl as an anion at 14,500 mg/L as the major impurities. The associated gas was mainly composed of carbon dioxide, containing little hydrogen sulfide. The hot water spouted out through the wells contained Na and a high concentration of Cl as the major impurities, suggesting possibility of mixing hot water containing a high concentration of salt with surface water. It is considered that neither hot water nor its impurity concentrations are evenly distributed in the deep underground of the Kumaishi area. It is therefore considered that the deep underground hot water sources for hot spring slightly vary in composition and impurity concentrations. (NEDO)

Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

Fiscal 1998 survey for geothermal energy development promotion. Environmental impact survey report (No. B-7 Kuwanosawa region); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-01

This survey aims to learn the current states of environmental factors required for the comprehension of the impacts on surroundings of a structural boring for geothermal energy exploration. The target site is an approximately 10km{sup 2}-large area located among the mountains 20km south-south-east of Yuzawa City, Akita Prefecture. It is found that numerous animals and vegetables inhabit the Kuwanosawa region and its vicinity. They are 19 species of mammals in 10 families under 5 orders; 73 species of birds in 25 families under 10 orders; 6 species of reptiles in 13 families; 9 species of amphibians in 6 families under 2 orders; and 719 species of insects in 179 families under 17 orders. Valuable animals include flying squirrels, mandarin ducks, black salamanders, and small Gifu butterflies. There are 670 species of vegetables in 132 families. Valuable vegetables are Iinuma bulblets, wild rhubarb roots, and Amur adonises. Floras found in existence are a natural flora in the beech class area, compensatory flora in the beech class area, afforested area, and a flora in the crop land. No remarkable fluctuation was observed in the Takamatsu spa throughout the survey period. Fluctuations were observed in all the survey items at the Doroyu-Okuyama inn. (NEDO)

Report on results 1998. Research and development on fusion area. Part 1 (next generation optical substrate technology); 1998 nendo seika hokokusho. Yugo ryoiki kenkyu kaihatsu daiichi bunsatsu (jisedai hikari kiban gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Emphasis was placed on the research on a planar apertured near-field head and a super-RENS (super-resolution near-field structure) method, as a near-field application element for replacing protruding probes, which has a number of difficult points in developing near-field recording into a practical system, and as a recording and reproducing method. The super-RENS method, as a result of the examination, has become capable of recording/detecting a mark of the minimum 60nm diameter, by the near-field, under conditions such as the most advanced optical disk size and the number of revolution of the disk. This means that a high density recording is possible which is at least 40 times as dense as a DVD (digital versatile disk). It was confirmed by an experiment that the high density was possible in the track pitch direction by the super-RENS method. As a result of the examination on the behavior of the near-field in the super-RENS disk, it revealed that signal detection by the transmitted light which had not been tried before was effective for the improvement of the performance. The smallest detectable mark size was 80nm, in which case CNR (carrier to noise ratio) was 6.4dB. These values are approximately the same level as in the signal detection by reflected light, and are insufficient to verify the superiority. (NEDO)

Research and development of basic technologies for the next generation industries, 'ultra-grid elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'chokoshi soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to ultra-grid elements. With regard to the process technology to search materials suitable for the targets of ultra-grid elements and manufacture ultra-grid element structure, a technology has been completed, by which crystalline growth is performed while controlling AlAs and GaAs at atom layer levels by using the MBE process and MOCVD process. This has allowed the understanding to be progressed on behavior of electrons in hetero interface or very thin films. It has also become possible to acquire new crystals that have band gaps and grid constants matching the performance of the elements. Regarding ultra-grid functional elements, new functional elements with the HET and RHET structures were made by utilizing the characteristics of the ultra grids, and performances of normal temperature operation and high speed operation were investigated. The ultra-grid structured elements have made it possible to embed ultra fine electrode structure into crystals by means of double hetero growth, and a possibility of Si-based PBT was demonstrated. These achievements lead to a belief that the targets intended at the beginning of the present research have been achieved. (NEDO)

Survey report for fiscal 1998 on the survey and study on basic information needs for development of welfare goods; 1998 nendo fukushi yogu kaihatsu kiban joho needs chosa kenkyu chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

With an objective to make clear the basic information about aged and handicapped persons requiring welfare goods upon the development thereof, this survey performed a questionnaire survey to business entities performing design, development, improvement and fitting of welfare goods. The questionnaire survey selected 879 business entities involved in manufacture and sale of the welfare goods. The effective reply recovery rate was 19.3%. The questions had the data contents required by products classified into body dimensions, motion capability, sensory functions, and work capability, asking to state data contents required for each item, reasons for the needs, and data sources. The data source currently utilized reveals that most of the replied enterprises utilize data derived from the company's own measurements, developments and experiences. The contents thereof indicate that the data are too old, the data contents do not match the current situation, and no required data are available. In designing, developing and fitting the welfare goods, the required data may not necessarily be obtained, whereas improvement in the database is strongly desired. (NEDO)

Fiscal 1999 technological survey report. Part 2. Applied technology for measuring human sense (Human sense measuring manual - basic technology for sense evaluation); Ningen kankaku keisoku manual. 2. Kankaku hyoka kiban gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A method of measuring/evaluating a mental and physical state by means of physiological information developed by a project was compiled into a 'guide book', as was a method of evaluating adaptability to the environment or products; and, this manual was prepared for the purpose of improving the adaptability of human beings to products by making use of the guide book widely in the field of industrial manufacturing. The part 2 explains a hard measuring instrument, evaluation device, simulation system, method of data analysis, etc., as 'basic technology for sense evaluation'. The chapter 1 is a new measuring and evaluation device (device for measuring physiological signals on the surface of the body, device for measuring visual characteristics, measuring device of in vivo substance, measuring device of thermal response, and system for evaluating adaptability of practical form), the chapter 2 is a new simulator (model of human body temperature with clothes on, human comfort meter, perspiring thermal manikin, and autonomic nerve control model in cardiac blood vessel/respiratory system), and the chapter 3 is new experimental/analytical method (new data analysis method and subjective evaluation questionnaire for stress assessment). (NEDO)

Report on the achievements in the Sunshine Project in fiscal 1988. Surveys and studies on arranging the conditions for commercializing new energy technologies; 1988 nendo shin energy gijutsu no kigyoka joken seibi ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

The current fiscal year has surveyed and studied to have coal liquefying plants and the different existing industrial plants put into a complex. When structuring specifically the commercialization of the coal liquefaction process, some kind of complex formation is required from its business size and economic performance. From this viewpoint, the current fiscal year has performed discussions with economic performance as an additional item on forming a complex with (1) petroleum refining industry, (2) iron and steel making industry, (3) chemical industry, and (4) electric power generating industry. Investigations were also carried out on the feasibility of systems thereof and the technological problems therein. In the subject (1), if coal liquefied oil is introduced into a petroleum refining process, and both oils can be mixed, construction cost of the coal liquefaction plant and the oil cost per barrel may be decreased. In the subject (2), forming a complex of a converter integrated steel mill having a crude ore production scale of 600,000 tons a year with a coal liquefaction plant having a scale of 30,000 tons a day will present problems in the balance of facility size and quantity. In the subject (3), producing chemicals as by-products as a result of complex formation will enhance the economic performance of the coal liquefaction plant. In the subject (4), a complex formed plant is more advantageous in load variation than ordinary power plants. (NEDO)

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of thin-film solar cell manufacturing technology (Development of material/substrate manufacturing technology - Development of high-quality amorphous material/substrate manufacturing technology); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / zairyo kiban seizo gijutsu kaihatsu (kohinshitsu amorphous kei zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A microcrystalline Si thin film is used to form the i-layer of a narrow gap a-Si based thin film solar cell. Since a microcrystalline p-layer is to act as the seeding crystal layer for the microcrystalline i-layer, it has to be very high in crystallinity and therefore is produced under high hydrogen dilution conditions. In this process, a problem arises of the darkening of the underlying transparent SnO{sub 2} electrode. Since this is due to chemical reaction on the SnO{sub 2} surface layer, blackening is prevented by shortening the film fabrication time, and then an excellently microcrystalline p-layer is obtained. Furthermore, by inserting a microcrystalline i-film buffer layer of low fabrication rate into the p/i boundary, plasma damage on the microcrystalline p-layer is inhibited for the fabrication of a microcrystalline i-layer high in crystallinity at high film fabrication rates. A high Voc is then obtained even when the microcrystalline p-layer is very thin. If the hydrogen dilution rate is too low when the i-layer film fabrication rate is high, the initially fabricated layer turns out to be thick to the detriment of film performance. On the other hand, the p-layer or the buffer layer will be etched when the hydrogen dilution rate is too high. The problem is solved by continuously varying the hydrogen dilution rate from high to low during i-layer fabrication. (NEDO)

FY 1999 research and development of technologies for commercialization of photovoltaic power generation systems. Development of technologies for fabrication of thin-film solar cells/materials and substrates (Development of technologies for fabrication of high-quality amorphous materials and substrates); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / zairyo kiban seizo gijutsu kaihatsu (kohinshitsu amorphous kei zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The research and development project is implemented for the amorphous/microcrystalline solar cells with the thin microcrystalline silicon film as the i layer, and the FY 1999 results are reported. The fabrication technologies are investigated for the microcrystalline silicon solar cells of pin or nip structure by RF or VHF plasma CVD using SiH{sub 4} and H{sub 2} as the stock gases. The tests are conducted for evaluating characteristics of the thin microcrystalline silicon film, to investigate the effects of film-making pressure, power and hydrogen dilution rate on the characteristics at a constant film-making temperature of 180 degrees C. The researches on the fabrication technologies for the microcrystalline solar cell of pin structure confirm that use of VHF plasma CVD improves crystallinity, electrical and optical characteristics of the p-type thin microcrystalline silicon film. The researches on the fabrication technologies for the microcrystalline solar cell of nip structure covers transparent substrates, film-making speed of the p layer, power and substrates, and a conversion efficiency of 7.5% is realized by the solar cell formed on a texture substrate. (NEDO)

Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Research and development concerning relations between sintered body textural structure and material characteristics in fine ceramics); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (fine ceramics no shoketsutai soshiki kozo to zairyo tokusei tono kankei ni kansuru kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development was carried out involving fine ceramic sintered body textural structure evaluation methods for the development of process technologies for achieving higher quality and lower cost. Studies centered about a method for evaluating coarse pores and coarse grains in sintered bodies, relations between sintered body fracture strength and textural structure, and the standardization of evaluation methods. As the result, an evaluation method for observing pore structures in a sintered body flake specimen under an optical microscope and another for observing coarse grains under a polarization microscope were proposed. As for the effect of coarse defects on the fracture strength of ceramics, it was demonstrated experimentally and theoretically that coarse defects several tens of micrometers in size greatly affected the fracture strength. In the study of methods for sintered body grain size evaluation, findings were obtained about the processing of the specimen surface. (NEDO)

FY 1998 geothermal development promotion survey. Report on the environmental effect survey (No. A-4 Kunbetsu-dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsudake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-30

Of the FY 1998 geothermal development promotion survey, the primary environmental effect survey in the Kunbetsu-dake area was conducted, and the results were arranged. In the well drilling survey, etc., the survey was made aiming at extracting areas to be preserved from an environmental aspect. The results of the survey were summarized as follows: As to the mammalia, 12 families 46 species were confirmed in the area surveyed and the periphery by literature survey. Out of them, the noticeable species which are considered important from an academic viewpoint are 10 families 19 species. As to the aves, 55 families 340 species were confirmed, of which 29 families 79 species are noticeable species. About the amphibia/reptilia, 3 families 3 species in the amphibia and 4 families 6 species in the reptilia were confirmed by literature and hearing survey. The noticeable species is 1 family 1 species in the amphilia. Concerning the terrestrial insecta, 135 families 873 species were confirmed, and the noticeable species is 11 families 20 species. As to the flora, 115 families 1055 species were confirmed, and the noticeable species is 46 families 126 species. Relating to the living vegetation, the one higher than 9 in nature reserves shows a substantial rate, and the periphery of Kaibetsu-dake is designated as the specified flora colony. (NEDO)

Report on the surveys in fiscal 1999 on the summary of new energy proliferation and promotion policies in Germany; 1999 nendo Doitsu ni okeru shin energy fukyu sokushin seisaku no gaiyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the surveys in fiscal 1999 on the new energy promotion policies in Germany. Because of the cold climate condition, eighty percent of household energy consumption is for room heating. Regulations on room heating thermal consumption on new and modified buildings, which were begun in the end of 1979, have accomplished the intended effects. However, the achievements have been deadlocked because of industrial collapse in the East Germany area and the delay in modernizing the prefabricated residential buildings. Because of the current situation in which energy saving is difficult in the consumer department, the federal government has shifted the emphasis to rationalization in the industrial department, which has started voluntary regulation on CO2 discharge. However, no noticeable effects have been seen in the electric power, steel making and chemical industries as have been expected. The limitation in energy saving and the policy of abolishing nuclear power generation on the long term basis (because of safety) have expanded expectation on regenerative energies. The plan calls for bringing up the regenerative energy utilization to 50% ratio by 2050, whereas a utilization promoting program was launched in September 1999. Part of the environment tax (amounting to an annual revenue of 12.5 billion Marks) will be assigned to the financial source for the subsidy measures (1 billion Marks). Legislative amendments are discussed, including review on the electric power purchase law for wind power and photovoltaic power generation systems. (NEDO)

FY 1999 report on the geothermal development promotion survey data processing. No. B-7 Kuwanosawa area (secondary); 1999 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.B-7 Kuwanosawa chiiki (dai niji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

As a part of the FY 1999 geothermal development promotion survey - Kuwanosawa area, the following were conducted and the results were arranged: ground surface survey (electromagnetic survey, analysis of numerical map), N11-KN-1 structure test boring survey, geothermal water survey, environmental effect survey, supplementary survey related to data processing, and comprehensive analysis. As to the reservoir structure, it seems that the area is low in water permeability from the results that there was seen little lost circulation at the time of drilling N11-KN-1 and that transmission coefficients in the water poring test indicated smaller values than those of the production well. In the underground temperature distribution, the temperature at a depth of 1,800m was 164.5 degrees C, which is lower than that in the neighboring Wasabizawa area. The geothermal water of N11-KN-1 does not have many dissolved constituents, showing alkalescence, which belongs to the Na-HCO{sub 3} type. As to the geothermal water of N11-KN-1, it seems that the meteoric water went down along faults and fractures, was stored in basement rocks and heated by heat conduction to form the geothermal water. In the Kuwanosawa area, there are seen very few geothermal signs on the ground surface, and a possibility seems to be small that high temperature and dominated geothermal fluids are active on a large scale. (NEDO)

FY 1993 report on the survey of geothermal development promotion. Jetting/reduction test (No.36 - Amemasu-dake area); 1993 nendo chinetsu kaihatsu sokushin chosa. Funshutsu kangen shiken hokokusho (No.36 Amemasu dake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-10-01

As a part of the survey of geothermal development promotion, the jetting/reduction test using a structure drilling well N4-AM-4 was made in the Amemasu-dake area, Hokkaido, survey was conducted of the state of jetting of geothermal fluid, the state of borehole, analysis of geothermal fluid, etc. The induced jetting was carried out by the Swabbing method in the total number of times of 97 in 10 days. As to the jetting of geothermal fluid, jetting was recognized in a short time from 2 hours 49 minutes to 3 hours 51 minutes, but did not result in the continuous jetting. The mean jetting amount of geothermal fluid was totally 4.03 t/h (0.69 t/h in steam flow and 3.34 t/h in water flow). The temperature of geothermal water while jetting was 90 degrees C, pH was 8.6-8.9, chlorine ion concentration was 520-960 ppm, and electric conductivity was 2.41-3.57 ms/cm. The pressure at the feed point while stopping jetting was 5,800 MPa, and the pressure just before stopping jetting was 1,191 MPa. Chemical components in geothermal water belonged to the alkali C1 type. The geochemical temperature of geothermal water by Na-K temperature was 229 degrees C at maximum and 202 degrees C at minimum. (NEDO)

Report on geothermal development promotion survey data processing in fiscal 1997. Tsujinodake Area No. B-6 (first report); 1997 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. 1. Tsujinodake chiiki No.B-6

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

This paper reports the achievements in the geothermal development promotion survey data processing in fiscal 1997 for Tsujinodake Area. Geological, alteration band and fluid geochemical surveys, gravity and electromagnetic exploration, and environment influence survey were generalized to summarize the state of existence of geothermal resources. Sea water permeated into deep underground portion was mixed with meteoric water from Ikeda Lake and Unagi Pond; heated by deep hot water originated from magma pools as the source of volcanic activities after formation of the Ata caldera; the resultant neutral high salt concentration hot water has risen on the Takeyama-Tsujinodake structural line; and was reserved in deep portion of Mr. Tsujinodake. The sea water permeated into deep underground portion was heated by the same deep hot water originated from magma pools as described above, has risen along the Ata caldera wall, and been reserved in the deep portion of Kaimon Dake Spa. Around the Yamakawa geothermal power plant, the permeated sea water was heated by the same magma pools as described above and by the intrusive rocks originated therefrom as the heat source. The water has risen along the shattered belt developing around the intrusive rocks or the Takeyama-Tsujinodake structure line, and been reserved. Around the Unagi pond, mixed sea and meteoric water has risen along the Yamakawa-Matsugakubo structure line, and been reserved. (NEDO)

Report on the surveys in fiscal 1999 on the summary of new energy proliferation and promotion policies in France; 1999 nendo France ni okeru shin energy fukyu sokushin seisaku no gaiyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the surveys in fiscal 1999 on the new energy promotion policies in France. The basic stance taken for the policies is the maintenance of public service in energy fields, diversification of supply systems and valuing the environment, and the responsibilities to the future generations. This course increases the relative importance of regenerative energies. Energy conservation is the most important policy problem on the medium to long term basis. The international commitment of France in dealing with global environment issues is to suppress generation of greenhouse effect gases in 2008 through 2012 to the level in 1990. The amount of gases that will be discharged as anticipated from the current status requires reduction of 16 million tons as the carbon weight. The environment tax was elaborated based on 500 francs per discharge of one ton of carbon, whose introduction has been decided to be made starting 2001. The taxation is estimated to have effect of reducing 6.7 million tons. The reduction is short by 2.27 million tons even if the effects of reduction measures in each sector and of the environment tax introduction are counted. The environment taxation may be made harsher if required, upon ascertaining the people's behavior in energy consumption. Measures to make the discharge right transaction more flexible are not taken into considerations. (NEDO)

Fiscal 1999 geothermal energy development promotion survey. Report on survey of introduction of techniques for predicting impact on hot springs; 1999 nendo chinetsu kaihatsu sokushin chosa hokokusho. Onsen eikyo yosoku shuho donyu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-01

In an effort to find guidelines on how to proceed with geothermal energy development so that it may coexist with hot springs, investigations are conducted into cases of impacts on hot springs imposed by geothermal energy development activities. An impact is judged to exist when geothermal development results in a decrease or depletion of pumped or spontaneously welling hot spring water, change in the concentration of dissolved chemical ingredients, fall in water temperature, or in an increase in the amount of discharged steam. Keyword-aided retrieval of data from databases is performed, and geothermal magazines are referred to for information. There are articles reporting impacts imposed by geothermal development on hot springs in the Palinpinon area (Philippines) and 12 others and in the Corwin Springs area (U.S.) and 13 others. These articles carrying outlines and impacts of geothermal development are collected, put in order, and analyzed. Cases in which such impacts are found to exist are categorized into four groups and, in each group, episodes are differentiated from each other by the type of mechanism linking the aquifer and the reservoir which is the object of development. (NEDO)

Fiscal 1999 geothermal energy development promotion survey. Survey of Akinomiya area (Long-term spurt test report - 1/2); 1999 nendo chinetsu kaihatsu sokushin chosa Akinomiya chiiki chosa hokokusho. 1/2. Choki funshutsu shiken

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

A long-term survey was conducted on the spurting properties and fluid properties of geothermal fluids, when boreholes N9-AY-3 and N10-AY-8 were used as spurting wells and N8-AY-1, N10-AY-6, and N10-AY-7 as reinjection wells. Conducted or investigated were pH, electric conductivity, chlorine concentration determination, static temperature/pressure logging, PTS (pressure, temperature, spinner flowmeter) logging with wells spurting, buildup test, sampler logging with wells spurting, fluid property survey, tracer test, and borehole N10-AY-8 pulsation with fume spurting. It was then found that the maximum spurting capacity of borehole N9-AY-3 was 65.7t/h in steam and 90.8t/h in thermal water at a pit mouth pressure of 1.30MPaG. Some decrease was detected for approximately one month after the start of spurting, but it was concluded that there would be no further decrease thereafter. The maximum spurting capacity of borehole N10-AY-8 was 10.4t/h in steam and 8.9t/h in thermal water at a pit mouth pressure of 0.24MPaG. Some reduction was detected in the flow of steam and in fluid enthalpy after the start of spurting, and it was inferred that there would be still further reduction after continual spurting. (NEDO)

Report on the surveys in fiscal 1999 on the summary of new energy proliferation and promotion policies in Canada; 1999 nendo Canada ni okeru shin energy fukyu sokushin seisaku no gaiyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the surveys in fiscal 1999 on the new energy promotion policies in Canada. At the Kyoto Conference for Global Warming Prevention, Canada agreed to reduce gas discharge in 2008 through 2012 by 6% from that in 1990 as the reduction target considered realizable while maintaining the trade competitive power. The Ministry for Natural Resources encourages enhancement in energy efficiency and use of substitution energy resources, and pushes forward the promotion programs. The government imposes the world's most stringent energy efficiency criteria on electric products through the high-efficiency and substitution energy program. In the regenerative energy technologies, the government supports use of regenerative energies from the cost and environmental influence aspects. In the energy development programs, the government supports eleven ministries and agencies for energy related research and development activities. In the regenerative energy development plan, targets are set on promotion of air conditioning and hot water supply systems utilizing such regenerative energies as solar light, biomass, and underground heat. The importance is placed not only on development of new technologies, but also on marketing technologies. (NEDO)

Report on the surveys in fiscal 1999 on the summary of new energy proliferation and promotion policies in Britain; 1999 nendo Eikoku ni okeru shin energy fukyu sokushin seisaku no gaiyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the surveys in fiscal 1999 on the new energy promotion policies Britain. Britain has liberated completely the electric power market in June 1999 subsequently from that for the gas market. In order to share the target of reducing greenhouse effect gases during 2008 through 2012 as committed by the EU in the Kyoto Protocol, Britain has decided officially a 12.5% reduction in June 1998. The climate change tax was proposed in March 1999, and its implementation is scheduled for April 2001. This is a taxation upon commercial and industrial operators (whose carbon dioxide discharge is accounting for 40%), by which annual reduction of two million carbon tons is estimated in 2010. The government has set a target to take care of 10% of the electric power demand by regenerative energies by 2010. This policy is anticipated to be announced by the end of 2000. The EU has moved one step forward for complete opening of the electric power market in 1999, which will be followed by the gas market in August 2000. In addition, a take-off campaign was launched to promote participation and investments into the regenerative energy project. (NEDO)

Fiscal 1998 geothermal energy development promotion survey. Report on data processing (No. B-6 - Tsujinodake area - Phase 2); 1998 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. 2. No.B-6 Tsujinodake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-01

The result of the data processing (Phase 1) and the result of the 1998 survey carried out for the Tsujinodake area, Kagoshima Prefecture, were subjected to a comprehensive analysis, and the state of existence of geothermal resources in this area was compiled into a report. In fiscal 1998, structural boring (N10-TD-1), thermal water examination, seismic exploration, environmental impact assessment, fluid inclusion examination, and rock dating were conducted. Some findings obtained from the comprehensive analysis are mentioned below. In the vicinity of structural borehole N10-TD-1, fluids move along geological boundaries and in permeable layers in the horizontal direction, with an aquiclude serving as a border. At levels deeper than 980m, there flows a mixture of seawater heated to approximately 135 degrees C by thermal conduction and water originating in Lake Ikeda. Still deeper, water from Ikeda Lake flows in and lowers the temperature. It is suggested that there may be a sharp and abrupt rise in temperature at levels deeper than the cooling region near the bottom of structural borehole N10-TD-1. It is inferred that the magma reservoir that produced the Tsujinodake lava is small as a heat source or that it has not yet formed a high temperature geothermal system shallow in the ground. (NEDO)

Report on the surveys in fiscal 1999 on the summary of new energy proliferation and promotion policies in Canada; 1999 nendo Canada ni okeru shin energy fukyu sokushin seisaku no gaiyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the surveys in fiscal 1999 on the new energy promotion policies in Canada. At the Kyoto Conference for Global Warming Prevention, Canada agreed to reduce gas discharge in 2008 through 2012 by 6% from that in 1990 as the reduction target considered realizable while maintaining the trade competitive power. The Ministry for Natural Resources encourages enhancement in energy efficiency and use of substitution energy resources, and pushes forward the promotion programs. The government imposes the world's most stringent energy efficiency criteria on electric products through the high-efficiency and substitution energy program. In the regenerative energy technologies, the government supports use of regenerative energies from the cost and environmental influence aspects. In the energy development programs, the government supports eleven ministries and agencies for energy related research and development activities. In the regenerative energy development plan, targets are set on promotion of air conditioning and hot water supply systems utilizing such regenerative energies as solar light, biomass, and underground heat. The importance is placed not only on development of new technologies, but also on marketing technologies. (NEDO)

Fiscal 1999 geothermal development promotion survey report. Data processing (No. B-5 - Musadake region - Phase 3); 1999 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No. B-5 Musadake chiiki (Dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

A comprehensive analysis was conducted into the results of a survey on the state of existence of geothermal energy resources in the Musadake region, Shibetsu-gun, Hokkaido. The region was volcanically active in the period from the Neogene period into the quaternary, with some volcanos still active even today. The geological structure on the whole is characterized by the Musadake/Mt. Shitabanupuri fault which is the major structure running NNE-SSW and having a folding structure. It is inferred that Musadake is the heat source responsible for the underground temperature distribution in this region. The maximum temperature of 274 degrees C is recorded at borehole N11-MD-3 in the northeastern part of Musadake, and the temperature falls rapidly as the distance from the borehole increases. Ejection of geothermal fluids is observed at boreholes N11-MD-3 and N11-MD-4. It is inferred that the deep-seated geothermal water is of the neutral Cl type with Cl concentration estimated at approximately 12,000 mg/liter. Steam composition is characterized by a gas concentration level that is as high as 3-4 vol.%. The gas is composedly mainly of CO2 and contains some hydrocarbons. Fluids in this region are classified into water mixing into deep-seated geothermal water and groundwater originating in meteoric water. (NEDO)

Development of fundamental technigue of compressed air energy storage (CAES) gas turbine power generation and resistivity tomography. Asshuku kuki chozo (CAES) gas turbine hatsuden no kiban gijutsu no kaihatsu to hiteiko tomography

Energy Technology Data Exchange (ETDEWEB)

Hibino, S; Suzuki, K [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

1991-12-01

Compressed air energy storage (CAES) has been studied as a promising storage system which has a good possibility of being put to practical use. Construction of the storage facility is required for CAES. For an economical construction of a storage facility, it is necessary to construct a storage facility by excavating, from the ground surface, a cavity in the ground. There is no case in Japan where rock storage is adopted with several tens of atmospheric pressure which is necessary for CAES. If highly pressurized air can be stored by the water sealing method, it is a very economical method in the case with hard rocks. As the first stem to verify the effectivity of the water sealing system, a water sealing experiment is performed in a boring hole. It is confirmed that water sealing can be possible up to about 40 atmospheres, and it is found that the resistivity, open joint distribution and coefficient of permeability of rocks have correlation as an investigating method for potential cracks in rocks and that resistivity tomography is effective for the investigation of cracks in rocks. 9 ref., 23 figs., 6 tabs.

FY 1997 research and development of fusion domains. Part 3. Studies on next generation optical substrate technologies; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 3. Jisedai hikari kiban gijutsu no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

With an objective of realizing super large capacity recording technologies largely exceeding the current limits of optical recording and magnetic recording, studies were conducted on application of near-field optics. In the study on recording by using near-field light, it was verified that a mark with approximately the same size as an aperture diameter can be formed on a phase change recording film when a fiber probe with an aperture diameter of about 200 nm is used. However, it was found that the recording using this system takes excessive amount of time. When laser light collected on an objective lens was irradiated pulse-wise, a mark with a minimum width of about 20 nm was observed with high contrast. This will mean that a record with recording density of one terabit/in {sup 2} can be read out. Other studies performed include those on evaluation of effects of polarized light and surface shape on near-field read-out, simulation, mechanism of crystallization in a phase change recording film, recording and playback with ultra-high resolution by using a conformable near-field aperture, fabrication of a flat aperture type near-field light probe array, and the evaluation thereon. 22 refs., 27 figs.

Investigation under international cooperation on the mentality/intellect-based technology. Development of mind-based technology; Shinsei chisei kiban gijutsu kokusai kyodo kenkyu chosa. Mind-Based Technology no kaihatsu ni kakawaru kenkyu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The mind-based technology (MBT) was investigated to be developed, for materializing the world where the human race and machinery live together without sense of incompatibility. Based on the human mind, the MBT is a technology to support the personal expression which respects the value judgment, diversity and individuality in the human life. For it, it is important to technologically comprehend the human mind and physiological/psychological state, and particularly, control the human will. In order to structure the social system in which the human race and technology live together, it is also important to build a life system information processing model which simulates the formation process to integrate the feeling, knowledge and conscience, together with an action system to be established. As an image to which the MBT is applied, support will be extended to the life fulfillment, personal expression and hearty communication. Development is expected toward the social security technology with robots living in the human society. Pursuing the mental richness and worthwhile life, the high-grade mature society needs the technology to communicate with the machinery gentle to the human race on the mutual interface. 21 refs., 8 figs.

Fiscal 2000 survey report. Foundation building project for international energy use rationalization. Master plan preparation for rationalized energy use; 2000 nendo kokusai energy shiyo gorika kiso seibi jigyo chosa hokokusho. Goriteki energy shiyo no tame no master plan sakusei

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For energy conservation and environmental protection using technologies for effective consumption of energy and for preventing pollution due to energy consumption, master plans were studied and prepared on photovoltaic power generation, wind power generation, natural gas utilization, and so on, for the Xinjiang Uygur Zizhiqu, Gansu Province, and Guandong Province, respectively. Propositions addressing the Xinjiang Uygur Zizhiqu involved a decrease in dependence on coal, utilization of natural gas, introduction of coal-fired cogeneration systems, introduction of wind power up to the level equivalent to the supply reserve capability, energy conversion and new industry development using natural gas, promotion of electrification of local communities, and so on. Propositions addressing Gansu Province involved the hydroelectric power system as the core of power sources, decrease in dependence on coal, enhanced utilization of natural gas, energy conversion and new industry development utilizing natural gas, and so on. Propositions addressing Guangdong Province involved a decrease in dependence on coal and oil, enhanced utilization of natural gas, introduction of natural gas-fired combined cycle power generation into urban sectors, accelerated utilization of wind power generation on isolated islands, and so on. (NEDO)

FY 1994 report on the survey and research of introduction, promotion of proliferation and guidance on new energy introduction. Pt. 2; 1994 nendo shin energy donyu fukyu sokushin shido ni kansuru chosa kenkyu. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

Survey, collection and analysis were performed on different items of information required for new energy technologies. Studies were carried out to structure a system to support smooth execution of technical guidance and consultation. Among the project areas for field tests on photovoltaic power generation systems for public facilities, measurements were executed on hourly power demand in facilities in snowy and cold districts with little data available. In putting different items of information into a database, data were collected and put into order for the following items: statistics on average value for ten years of insolation time in 842 locations nationwide, calculation of insolation on slanted surface at the insolation measuring points (slanting angles and insolation on the slanted surface at which energy amount available for power generation is maximized in a year, as obtained by estimating the insolation on horizontal surface from the insolation duration), and expansion and addition of the introduction examples. Specifications for solar cell modules and inverters were classified and put into order, and so were on types, specifications, and product descriptions for photovoltaic power generation systems for individuals' houses. The aid system structured in the previous year was discussed for improvement, and new information was put into a database to improve the aid system. (NEDO)

FY 1999 report on the results of the research cooperative project on the research cooperation in promotion of reforming the structure of the Asian economy; 1999 nendo Asia keizai kozo kaikaku sokushin kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

This project aims at making the best possible of vitality of private companies in Asia, producing the technical results which directly connect to commercialization in a short term, and leading them to reinforcement of developmental ability of their own technologies in the country. In the first fiscal year, eight projects were carried out in five ASEAN countries, and the developmental results with high potential of commercialization were obtained. The names of project are as follows: 1) development of Thai material type seasoning (Thailand), 2) development of electronic ceramics sintering technology by the domestic production (Thailand), 3) study of small-/medium-scale activated coal production technology for depopulated areas in Indonesia (Indonesia), 4) development of a fiber material procurement supply chain management system connecting among Asian countries by Web, 5) development of large plastic formed products adopting gas injection blow molding method (The Philippines), 6) joint R and D on the increase in power transmission capacity using the existing overhead transmission line in Malaysia, 7) development of local site application type asbesto substituting construction materials (Vietnam), 8) low temperature storing technology for Japanese species rice produced in Vietnam (Vietnam). All the projects were proposed by Japanese companies. (NEDO)

Research report on promotion of geothermal energy exploitation for fiscal 1997. Fluid geochemical research (No.B-6 Tsujinodake district); 1997 nendo chinetsu kaihatsu sokushin chosa. Ryutai chikagaku chosa hokokusho (No.B-6 Tsujinodake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

The research covers the Tsujinodake district spreading over Yamakawa-cho and Ibusuki-shi, Kagoshima Prefecture. Hot spring water in the district is of the neutral Cl type, heated mainly by conduction and containing seawater. The thermal water layer of the highest geothermal potential exists in the vicinity of the Nishi district of Ibusuki-shi. It spreads widely in the westward part and may be linked with the Unagiike district. The temperature of the deep-seated thermal water layer is estimated at 220-230 degrees C, yet it may be higher. In addition to the layer in the vicinity of the Nishi and Unagiike districts, there is a shallow-seated hot spring aquifer in the Nagasakibana district, where the deep-seated thermal water is probably prevented from lifting in the presence of an aquiclude. In the Narikawa district, possibilities are low that the thermal water just beneath will come up. As for hot spring water in the Oyama and Okachogamizu districts, there are no signs of high-temperature thermal water infiltration. In these two districts, it appears that hot spring water is heated by conduction over a large area. For the disclosure of linkage of hot water systems and deep-seated geothermal structures which cannot be detected by geochemical investigations conducted into hot spring water, etc., it is necessary to resort to geological and geophysical researches, and to carry out test drilling. (NEDO)

FY 1998 annual report on the survey on development, introduction and promotion of urban type multipurpose geothermal utilization techniques; 1998 nendo toshigata tamokuteki chinetsu riyo gijutsu no kaihatsu, donyu, sokushin ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Introduction of geothermal heat pump systems, which depend on temperature differential, is investigated for urban areas, which have large energy demands. Results of the surveys on the current situations of geothermal heat pump (GHP) systems indicate that they have already numbered 300,000 units in USA and totaled more than 50,000 units in Switzerland and Northern European countries, and that they are increasing at an annual rate of higher than 10%. The results also indicate that introduction of these systems are well feasible in Japan, which generally has better topographical conditions than American and European countries, and the GHP system with vertical ground heat exchanger is investigated for its topographical and environmental considerations. These systems could annually abate approximately 52 million tons of CO2 (4.3% decrease), if disseminated to all households. They are also expected to help control the heat island phenomenon, and reduce peak power consumption. The technological problems to be solved before these systems are massively disseminated including development of small scale drilling rigs and preparation of drilling manuals. System standardization and introduction of subsidy systems are also needed to massively disseminate these systems. (NEDO)

FY 1994 report on the survey and research of introduction, promotion of proliferation and guidance on new energy introduction. Pt. 2; 1994 nendo shin energy donyu fukyu sokushin shido ni kansuru chosa kenkyu. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

Survey, collection and analysis were performed on different items of information required for new energy technologies. Studies were carried out to structure a system to support smooth execution of technical guidance and consultation. Among the project areas for field tests on photovoltaic power generation systems for public facilities, measurements were executed on hourly power demand in facilities in snowy and cold districts with little data available. In putting different items of information into a database, data were collected and put into order for the following items: statistics on average value for ten years of insolation time in 842 locations nationwide, calculation of insolation on slanted surface at the insolation measuring points (slanting angles and insolation on the slanted surface at which energy amount available for power generation is maximized in a year, as obtained by estimating the insolation on horizontal surface from the insolation duration), and expansion and addition of the introduction examples. Specifications for solar cell modules and inverters were classified and put into order, and so were on types, specifications, and product descriptions for photovoltaic power generation systems for individuals' houses. The aid system structured in the previous year was discussed for improvement, and new information was put into a database to improve the aid system. (NEDO)

FY 1990 report on the survey of geothermal development promotion. Survey of geothermal water (No.34 - Kaminoyu/Santai area); 1990 nendo chinetsu kaihatsu sokushin chosa. Nessui no chosa hokokusho (No.34 Kaminoyu Santai chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-01

For the contribution to elucidation of the structure of geothermal reservoir in the Kaminoyu/Santai area in the southwest part of Hokkaido, jetting test/sampling of geothermal fluid/analysis of properties were carried out in Structural Drilling Well N2-KS-2. The induced jetting of N2-KS-2 was conducted by the air lift method in consideration of the well temperature, state of lost circulation while drilling and results of the water pouring test. As a result, the mean jetting amount of geothermal water was 202.4L/min. The total pumping amount was 559kL, which is equal to approximately 119 times as much as the volume of well. The maximum temperature was 95.9 degrees C, resulting in no steam jetting. The pH of geothermal water was 7.41-8.44, electric conductivity was 9,620-10,450 {mu}s/cm, and the Cl ion concentration was 2,204-2,545 mg/L, which are almost stable. Properties of geothermal water is classified into an alkalescent CL-SO{sub 4} type. As a result of the study, the geothermal reservoir of N2-KS-2 is basically formed by a mechanism of a mixture of the surface water and the deep geothermal water that is similar in isotope to the geothermal water of Nigorikawa production well, which indicated a tight relation in the origin with the group of Kaminoyu hot spring. (NEDO)

FY 1993 report on the survey of geothermal development promotion. Survey of geothermal water (No.36 - Amemasu-dake area); 1993 nendo chinetsu kaihatsu sokushin chosa. Nessui no chosa hokokusho (No.36 Amemasu dake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-01

As a part of the survey of geothermal development promotion in FY 1993, survey of geothermal fluid was made using a precise structure drilling well N5-AM-5 as exploration well in the Amemasu-dake area, Hokkaido. The induced jetting of geothermal fluid was carried out by the Swabbing method in the total number of times of 185 in 11 days at 10-20 times/day, but did not result in the jetting of geothermal water. The sampling of geothermal water was conducted by guiding the geothermal water that overflowed the guide pipe to the tank. The temperature of geothermal water indicated approximately 20 degrees C in the 1st time and 40-60 degrees C in and after the 2nd time every day. The electric conductivity of geothermal water was 2.033 mS/cm, chlorine ion concentration was 420-500 ppm, and pH value was 7.17-7.72. As a result of the survey, it was presumed that the geothermal water of this well originated in the meteoric water around the area and formed slightly supported by emitted volcanic matters. As to the geochemical temperature, the silica temperature indicated about 120 degrees C and the alkali ratio temperature did about 180 degrees C. It was considered that there possibly existed geothermal reservoirs of approximately 180 degrees C in alkali ratio temperature around the well. (NEDO)

FY 1996 Report on the data processing for the geothermal development promotion investigation. No.B-3 Kumaishi Area (Phase 2); 1996 nendo chinetsu kaihatsu sokushin data shori hokokusho. 2 . No.B-3 Kumaishi chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

Described herein are the FY 1996 results of the No.B-3 Kumaishi Area investigation, conducted as part of the geothermal development promotion investigation project. The ground investigation project covers geological and altered band, geochemical, gravitational and electromagnetic investigations. The drilling investigation project covers the test drilling for the structural investigation, temperature logging, water injection and temperature recovery tests at the N7-KI-1, N7-KI-2, N8-KI-3 and N8-KI-4; core cutting investigation; hot water investigation at the N8-KI-1 and N8-KI-2; and environmental impact investigation. The following conclusions are derived from the findings. The geothermal hot water in the test area came from seawater (fossil seawater) locally captured by the highly water-permeable strata (e.g., interfaces in the strata, and fractured strata) and underground water from rain water, heated by the conducted heat to around 200 degrees C at the highest. It is estimated that the center of the conducted heat is located in the eastern part of the Yagumo Area. The geothermal hot water was not heated to an extent to form the widely distributed convection systems, but arise in the form of separate, small-scale systems. (NEDO)

Fiscal 1999 geothermal development promotion survey. Development potentiality survey - Strategic survey/nation-wide survey (Report on Hokkaido region); 1999 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa - senryakuteki chosa zenkoku chosa (Hokkaido chiiki hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-01

For the effective implementation of the survey, an analysis was conducted into areas expected to be successfully developed for geothermal energy, and promising areas and prioritized survey areas were selected. Data then in existence were collected at the Doto district 1, Doto district 2, Toyoha-Niseko district, and the Iburi district and subjected to reanalysis, and a wide area geothermal system conceptual model was built. Using the model, development-promising areas were extracted, the amount of resources was assessed, and an optimum survey program was prepared. One promising area was selected in the Doto district 1, four in the Doto district 2, two in the Toyoha-Niseko district, and one in the Iburi district. As prioritized survey areas, Musadake was selected in the Doto district 1; Yoichidake, Yunosawa, and Takinosawa in the Toyoha-Niseko district; and Raibadake in the Iburi district. A Monte Carlo analysis was conducted, and the result indicated that Musakake had 93-121MWe in resources of which 55MWe would be exploitable with a probability of not less than 90%. (NEDO)

Fiscal 1998 research report on promotion of geothermal development. Environment impact research report (No. A-4 Kunbetsu-Dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsu chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

For extracting the areas to be conserved from the viewpoint of environment for the research on geothermal well drilling, the environment impact research was made on the protection and regulation states of animals and plants in Kunbetsu-Dake area. 46 species in 12 families of mammals were confirmed in/around the area by document survey, and among them 19 species in 10 families of mammals were important academically. 340 species in 55 families of birds were confirmed, and among them 79 species in 29 families of birds were important academically. 3 species in 3 families of amphibians, and 6 species in 4 families of reptiles were confirmed, and among them 1 species of amphibian was important. 873 species in 135 families of land insects were confirmed, and among them 20 species in 11 families were important. 1055 species in 115 families of plants were confirmed, and among them 126 species in 46 families were important. Most of vegetation was 9 or more in degree of naturalness. The peripheral area of Kaibetsu-Dake is the plant colony area specified by the 2nd basic survey on natural environmental conservation (Environment Agency). (NEDO)

Research and development of basic technologies for the next generation industries, 'three-dimensional circuit elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'sanjigen kairo soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to three-dimensional circuit elements that integrate functions at ultra-high density. For the basic technology of lamination, the SOI technology suitable for the three-dimensional circuit elements was developed, and it has become possible to manufacture high-quality multi-layered crystalline structure by means of annealing that uses laser and electron beam. In addition, a lateral epitaxial technology for solid phase was developed, and the base to be applied to the three-dimensional circuit elements was established. Furthermore, the technology to put thin film circuits together would be useful for high-density integration in the future. The three-dimensional circuit makes parallel processing in each segment possible, whereas a possibility was shown that the processing can be performed at much higher speed than before. Actually a prototype three-dimensional circuit equipped with functions for parallel processing and judgment processing was fabricated. The image pre-processing which has been impossible on the real time basis in the conventional two-dimensional integrated circuit was realized in a speed as fast as milli-second order. These achievements lead to a belief that the targets for the present research and development have been achieved. (NEDO)

Fiscal 2000 research achievement report on the pioneering research and development involving next-generation liquid crystal process base technologies; 2000 nendo jisedai ekisho process kiban gijutsu ni kakawaru sendo kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the enhancement of energy conservation in the liquid crystal display manufacturing process, activities are conducted in the three fields of (1) low temperature thin film fabrication technology, (2) zone-selective thin film growth technology, and (3) next-generation liquid crystal process base technology and comprehensive surveys. Conducted in field (1) are pioneering studies of low temperature high quality Si film fabrication by electromagnetic annealing, low temperature high quality thin film fabrication by EPA (electron plasma annealing), and low temperature normal pressure film fabrication. Conducted in field (2) are pioneering studies of zone-selective fabrication of high quality Si crystal film, high precision control of reforming (doping), and free pattern low resistance wiring fabrication. Conducted in field (3) are tentative fabrication, evaluation, and analysis of ultimate performance TFTs (thin film transistors) produced by the state-of-the-art purification enhancement technology; next-generation liquid crystal process; and surveys of functional thin film to be a novel material for substrates. In the pioneering study of low temperature high quality Si film fabrication by means of electromagnetic annealing, microwave annealing is studied as an energy efficient process to replace the currently favored ELA (excimer laser annealing) method, and then it is proved that the microwave annealing method is much higher in energy efficiency than the ELA method. (NEDO)

Research and development of basic technologies for next generation industries, 'composite materials'. Evaluation on final research and development (interim report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (saishu kenkyu kaihatsu hyoka 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

Development was made on a technology to evaluate quality of composite materials. Few data are available for environmental resistance of composite materials, whereas identification of environmental deterioration behavior and establishment of a environmental resistance evaluating technology are a significant issue in utilizing these materials as new materials for space, aeronautics, and marine applications in the future. The present research was taken up with objectives to elucidate deterioration behavior of composite materials exposed to special environment in the atmosphere and space and to establish methods for acceleration tests and environmental performance evaluation by using simulated environments equivalent to the natural environment exposure. The former period (fiscal 1982 through 1984) has investigated environmental conditions in the atmosphere and space, prepared standard test specimens, performed design on environmental devices simulating the environmental elements, as well as tests on deterioration due to environmental elements, and systematized the deterioration characteristics to establish composite test conditions. The latter period (fiscal 1985 through 1988) has developed the composite environment testing device based on the result achieved in the former period, elucidated the deterioration behavior under the composite environmental conditions, and performed evaluation tests on the developed composite materials (FRP). (NEDO)

Research and development of basic technologies for the next generation industries, 'bio-elements'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihtsu 'bio soshi'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed in order to establish basic technologies to realize new information processing incorporating high-order functions of living organisms, and bio-elements equipped with high-order functions. In the field of developing technical means to measure directly the information processing function of living organisms, detailed analysis has become possible for the first time on spatial operation of nerve activities by using two-dimensional beam measurement operation on the nerve activities. In the field of aiming at modeling, a system to realize functions effective in terms of engineering was structured by incorporating into the model the functions specific to nervous systems of visual sense and motion. In the field of element technologies, a large progress was seen in the basic technology and evaluation technology such as design and fabrication of molecules added with different functions in the LB membrane. Membranes having simple but different functions such as light beam and scent detection were manufactured, whereas a possibility of having them manifest functions as elements was verified. Furthermore, possibilities were discovered in manufacturing functional membranes by using self-organizing capability as a result of using basic properties possessed by polymers, and in realizing functions simulating plasticity of nerves. These achievements would lead to a belief that the targets of the first term research and development have been achieved nearly completely. (NEDO)

Research and development of basic technologies for next generation industries, 'composite materials'. Evaluation on final research and development (final report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (saishu kenkyu kaihatsu hyoka 3)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

This paper carries the specifications for advanced composites in the investigation (SACOI), and lists the titles and organizations and persons in charge. The paper describes the specifications for test and measurement methods for each title. The titles are: testing methods of matrix resins for carbon fiber reinforced plastics, measurement method for thermogravimetry and glass transition temperature for the same plastics, measuring methods for specific gravity, fiber and void contents of carbon fiber reinforced plastics, testing methods for tensile properties, compression properties, apparent interlaminar shear strength, tension fatigue, interlaminar fracture toughness, crack propagation, high velocity impact, izod impact, and environmental resistance for the same plastics, evaluation methods for hot-press formability of prepreg, autoclave formability of prepreg for the same plastics, measuring methods for tex count, density, and fiber volume fraction of wire preform, testing methods for tensile strength at room temperature, tensile strength at elevated temperature of wire preform, measuring methods for thermal expansion coefficient, tension properties, compression properties, tensile shear strength, interlaminar shear strength, in-plane shear strength, tensile fatigue, high velocity impact and regular impact of wire preform. (NEDO)

Report on the achievements in the Sunshine Project in fiscal 1985. Surveys and studies on arranging commercializing conditions for new energy technologies (a summarized version); 1985 nendo shin energy gijutsu no kigyoka joken seibi ni kansuru chosa kenkyu seika hokokusho. Yoyakuhen

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-01

The purpose of the present surveys and studies is to discuss positioning of new energies for the case of forming the energy mix for Japan, and measures to arrange the conditions to have the positioning take roots in the society. One of the assignments in the discussion is to propose a system intended of improving the economic performance and of harmonizing with the existing energy systems, by establishing an adequate hybrid system composed of new energies and the existing energies. The current fiscal year will propose a hybrid system for manufacture or composite utilization of 'new synthesized fuels'. Another assignment is to discover a method to analyze quantitatively and evaluate how much the energy supply security in Japan will be improved, what the economic performance would be, and how the improvement effects will relate with cost of developing the new energies as a result introducing the new energies into the society. This fiscal year will analyze the importance of the evaluation factors themselves that make it possible to analyze such a dynamic change as oil crisis, and evaluate effects caused by fluctuation in crude oil price, effects on energy consumption and environment, and the energy mix. (NEDO)

Report on an investigational research on intensive arrangement of the resource recycling type/energy conservation type lifeline system which survives disaster; 1995 nendo shigen recycle gata shoshigengata no saigai ni tsuyoi life line no shuyaku seibi system no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the necessity of reducing waste construction materials and reutilizing as resource, the paper studied the issue on earthquake waste, in particular. Facilities of electric power/gas, water supply and sewerage system, roads, railroads, information, etc. are lifelines to support city life. Large earthquakes damage various lifelines and paralyze urban functions, and at the same time, produce a large quantity of waste due to the dismantlement of structures hit by earthquake, etc. It is important that the system is too tough to suffer damage, but more important that it is easily repaired. A large scale of underground multi-purpose duct has enough redundancy to absorb external force even if the duct itself is damaged. Such large-scaled and antiseismic ducts are so high-priced that they cannot be deliberately distributed all over the city. Therefore, the paper proposed simple ducts installed under the sidewalk. The duct is a U duct with a cover easy to remove, and is easily repaired. As duct materials, resin concrete using waste materials, etc. are considered. There still are a lot of problems to be solved such as expense sharing with the main body of business and legal restrictions. 25 figs., 36 tabs.

Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Development of thin-film solar cell manufacturing technology (Development of material/substrate manufacturing technology - Development of amorphous silicon-based high-quality material/substrate manufacturing technology); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (zairyo kiban seizo gijutsu kaihatsu - amorphous silicon kei kohinshitsu zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The project aims to enhance the stability of amorphous solar cells. For elevating TCO (transparent conductive oxide) substrate transmittance to an ultrahigh level and for obtaining amorphous layers less to suffer photodegradation, efforts were made to develop substrate materials stable upon exposure to plasma and low in defect density. In the study of TCO, a high-transmittance glass substrate was employed and TCO was made thinner, and the specimen achieved transmittance of 91.3% or 6.3% over that of the conventional type. In the study of low reflection films, it was found that their transmittance came to be stable and remain so after 150 days after a weatherproof test. In the study for stability enhancement, optimization was carried out for a plasma resisting Ga{sub 2}O{sub 3}-added ZnO film for the manufacture of a substrate material capable of properly behaving in a high-speed a-Si film fabrication process. Low-temperature film fabrication was studied to enable low-cost manufacturing, and it was learned that a 4 times 10{sup -4} ohm/cm low-resistance film was obtained by sputtering Ga{sub 2}O{sub 3}-added ZnO where magnetism was intensive at room temperature, that films excellent in crystallinity were obtained by the same method even at low temperatures, and so forth. (NEDO)

Report on fiscal 2000 geothermal development promotion survey. No. C-5 Appi district environmental impact survey (1st phase); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho - No.C-5. 1. Appi chiiki kankyo eikyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-08-01

For the survey of weather in the Appi district, Iwate Prefecture, observation data covering the last decade were collected at weather stations and the like, and characteristics of weather, climate, and natural earthquakes were learned. In the survey of fluctuation in the spa water level, studies were made about fluctuation in water temperature, spring water, and river water, and basic data were collected for the examination of the impact to be generated by geothermal exploration well boring and short-term discharge tests. In the survey of animal and vegetables, the habitation and distribution of animals and vegetables at sites planned for geothermal well boring were investigated, and data were collected for the evaluation of the impact to be imposed on them by well boring or the like. In the survey dealing with nature conservation and landscape, laws and regulations governing nature conservation were collected and put in an easy-to-use order, and seasonal changes in the natural landscape were photographed and recorded. In the survey of noise/vibration and ground fluctuation, the background values were measured prior to the implementation of geothermal well boring, discharge tests, and so forth. (NEDO)

FY 1998 geothermal development promotion survey. Report on the environmental effect survey (animals/plants, No. B-7 Kuwanosawa area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (doshokubutsu, No.B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This survey was conducted to estimate effects of drilling of geothermal exploration well on the environment, aiming at grasping the present state of environmental elements before the survey/development. As a result of the literature survey, the following distribution were confirmed in the fauna: 5 orders 10 families 19 species in the mammalia, 10 orders 25 families 73 species in the aves, 1 order 3 families 6 species in the reptilia, 2 orders 6 families 9 species in the amphibia, and 17 orders 179 families 719 species in the insecta. In the flora, a distribution of 132 families 670 species was confirmed. The results of studying the above indicated that in the fauna, there were 10 species such as antelope as valuable animal in the area surveyed and that it is necessary to pay much attention to the environmental preservation of the habitat for those animals in the well drilling associated with geothermal survey. In the flora, the 13 valuable animals selected as animal having a fear of extinction in the 'plant-version red list' were confirmed in the area surveyed and the periphery. Further, as to the plant colony, there are no important colonies in terms of preservation. In well drilling, important things are efforts exerted to restore to the original state of the area altered, prevention of the washed-away of mud water, etc., and efforts exerted to preserve the environment of vegetation. (NEDO)

Investigation of geothermal development and promotion for fiscal 1997. Investigation report on geological/alteration zone (No. B-5 Musadake area); 1997 nendo chinetsu kaihatsu sokushin chosa. Chishitsu henshitsutai chosa hokokusho (No.B-5 Musadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This investigation was intended to clarify the possibility of existence of geothermal reservoir layer by elucidating the underground structure and thermal source forming the geothermal system around Musadake, in the area extending over Nakashibetu-cho and Shibetu-cho, Shibetu district, Hokkaido, and further by grasping the distribution and properties of the geothermal alteration zone. The geothermal system of the subject area seems to be governed by Musadake - Mt. Shitabanupuri fault, its incidental bent zone, and the graben extending to the southeast side. The thermal source is presumably a magma reservoir that evolved Musa volcano. The depth hot water is presumed to exist in the underground depth around Mt. Imora; and it seems that the thermal conduction and volcanic ejecta are caused by a chain of volcano-related magma reservoirs around Musadake, the thermal source presumably. The depth hot water is estimated to be not less than 250 degrees C and a high Cl concentration. Within the graben, mudstones are distributed such as Kawakita layer and Yokoushigawa geological layer. Moreover, it is possible that an impermeable layer due to alteration is spread. (NEDO)

FY1997 report on test well drilling and well investigation for the Akinomiya area survey in the geothermal development promotion survey; 1997 nendo chinetsu sokushin chosa. Akinomiya chiiki chosa shisui kussaku koji oyobi kosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In order to extract promising areas with high geothermal feasibility, the Akinomiya area was surveyed by drilling test wells. In the N9-AY-3 excavating work, the first stage (depth from 15 to 33 m) used the water-free excavation to prevent adverse effects on the water sources. The second stage (depth from 33 to 409 m) reached the targeted depth with slanted excavation. The third stage drilled into depths from 409 to 1,006 m. The fourth stage was targeted to drill down to 1,802 m, but an entire lost returns have occurred at the depth of 1,598 m, whereas lost water drilling was performed by using fresh water, and the drilling was terminated at the targeted depth. The AY-4 excavation was also advanced with the first, second, third and fourth stage method, and when the entire lost returns have occurred at 1,196 m, the lost water drilling was carried out by using fresh water, and the drilling was terminated at the scheduled 1,505 m. The AY-5 excavation was also advanced with the first, second, third and fourth stage method. The first and second stages used water-free excavation (using air hammers) to avoid influence on the nearby spa areas. The third stage went down to 405 m performing coring, but the entire lost returns occurred at 298 m. The excavation rate was very high, and the core recovery rate reached 100%. The fourth stage presented the same coring condition as that for the third stage down to 1,002 m. (NEDO)

Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

FY 1995 Report on the data processing for the geothermal development promotion investigation. No.B-3 Kumaishi Area (Phase 1); 1995 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. 1. No.B-3 Kumaishi chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

Described herein are the FY 1995 results of the No.B-3 Kumaishi Area investigation, conducted as part of the geothermal development promotion investigation project. The project covers the geological structure, geochemical, gravitational, electromagnetic, environmental impact and supplementary investigations. The following findings are obtained by the comprehensive analysis of the data. The Kumaishi Area is based on the sedimentary rocks and granite formed in the Pre-Ternary, which are unconformably covered by the strata belonging to Upper Oligocene of Ternary to Lower Pleistocene of Quaternary. The presence of NW-SE to E-W to NE-SW systems is suggested as the main fracture systems. It is estimated by the K-Ar method that the intrusion was formed in the 2.06 to 2.28Ma. The geochemical temperature suggests the presence of the fluid of 200 degrees C or higher as the deep hot water temperature. The resistivity structure generally indicates the NW-SE direction. Each stratum is confirmed by the test drilling for the structural investigation. The fluid motion model suggests possibility of hot water of high salt content, similar to that confirmed deep in the Yagumo Area, distributed deep in the Kumaishi Area. (NEDO)

FY 2000 report on the geothermal development promotion survey - No.C-4 Shiro-mizukoshi area. Resource survey (Primary); 2000 nendo chinetsu kaihatsu sokushin chosa. No. C-4 Shiromizukoshi chiiki shigen chosa hokokusho (Dai 1 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

As a part of the FY 2000 geothermal development promotion survey, survey was conducted in the Shiro-mizukoshi area (about 10km{sup 2}), Kagoshima prefecture, the gradually-inclined area located at the southwest foot of Volcano Kirishima, and the results were summed up. In the survey, the following were carried out: surface survey such as geology/alteration zone/fracture system, high-density gravity exploration, electromagnetic exploration, geochemical fluid survey, core test by drilling three exploration boreholes, temperature log, temperature recovery test, water injection test, short-term jetting test, etc. N12-SZ-1 came across the reservoir associated with the ENE-WSW system fault at a depth of 1,085m. The result of the temperature log and the geochemical temperature indicated that the temperature of the reservoir was between 230 and 240 degrees C. However, the reservoir was regarded as the vapor heating reservoir heated by the high-temperature vapor which is thought to be the shallow ground water separated from the deep reservoir. N12-SZ-2 was a large lost circulation zone at a depth between 1,325 and 1,486m, which indicated that N12-SZ-2 came across the ENE-WSW system Shiro-mizukoshi fault. N12-SZ-3 seems to be the area into which ground water flows. (NEDO)

FY 1997 Report on the data processing for the geothermal development promotion investigation. No.B-3 Kumaishi Area (Phase 3); 1997 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. 3. No.B-3 Kumaishi chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-01-01

Described herein are the results of the comprehensive analysis of the No.B-3 Kumaishi Area, investigated in the FY 1995 to 1997 period as part of the geothermal development promotion investigation project. The ground investigation project covers geological and altered band, geochemical, gravitational and electromagnetic investigations. The drilling investigation project covers the test drilling for the structural investigation, temperature logging, water injection and temperature recovery tests at the N7-KI-1, N7-KI-2, N8-KI-3, N8-KI-4 and N9-KI-5; core cutting investigation; hot water investigation at the 4 wells; environmental impact investigation; and supplementary investigations for determination of ages of rocks and alteration, and analysis of the substances contained in the fluid. The following conclusions are derived from the findings by the comprehensive analysis. The geothermal hot water in the test area came from seawater (fossil seawater) locally captured by the highly water-permeable strata (e.g., interfaces in the strata, and fractured strata) and underground water from rain water, heated by the conducted heat to around 200 degrees C at the highest. It is estimated that the center of the conducted heat is located in the eastern part of the Yagumo Area. (NEDO)

Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

Research and development of basic technologies for next generation industries, 'high crystalline polymeric material'. Evaluation on second term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokesshosei kobunshi zairyo (dainiki kenkyu kaihatsu kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

This research and development is intended to establish a basic technology related to high crystalline polymeric material that has dynamic properties comparable to metallic materials by single polymeric material as a structural material. Thick and large high-elasticity molded forms were obtained by searching poly-arylate material, and by developing such processing technologies as high-pressure injection molding, composite injection molding, and elongation fluidity molding. High-elasticity molded forms with uniform internal orientation were obtained by heating and molding liquid crystal polymers under high magnetic field. Solution molding was performed on a molecular composite consisting of rigid chains and soft chains, which was laminated and bonded to have obtained an isotropic form with as high elasticity as 54 GPa. In addition, high pressure powder formation of cross-linked polymers of di-acetylene system provided an isotropic form with sound wave elasticity of 23 GPa.

Research and development of basic technologies for next generation industries, 'electrically conductive polymeric material'. Evaluation on second term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Dodensei kobunshi zairyo (dainiki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The research and development in the second term included development of raw materials, elucidation of electricity conduction mechanism, and development of methods to improve stability and a new processing method. Crystals of a large number of charge migrating complexes were grown to elucidate their electron properties and structures. A theoretical model was structured for the superconduction mechanism in the charge migrating complexes. Poly-p-phenylene vinylene-based polymers achieved {sigma}=1.1 times 10{sup 4}s/cm as a result of extension of soluble reaction intermediates. Poly-2, 5-phenylene vinylene doped with FeCl{sub 3} retained 10{sup 3}s/m for 165 days in nitrogen. Polypyrrole achieved 3.0 times 10{sup 3}s/cm in constant potential electrolytically oxidizing polymerization and extension at low temperatures. Polypyrrole doped with ClO{sub 4}{sup -} retained electric conductivity of 85% for 400 days in nitrogen. Electric conductivity of higher than 10{sup 5}s/cm was obtained by applying different kinds of doping into thin film and fiber formed graphite. The world's highest conductivity of 9 times 10{sup 5}s/cm was achieved particularly with discharge laminated and polymerized graphite doped with AsF{sub 5}. (NEDO)

Research and development of the industrial basic techniques of the next generation. Composite materials (Final research and development evaluation / Part 1); Jisedai dangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (Saishu kenkyu kaihatsu hyoka 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

This R and D project is aimed at development of highly functional materials for aerospace devices, bringing into focus research and development of resin-based composite materials (FRPs), metal-based composite materials (FRMs), and evaluation of their properties and their design techniques. The basic target properties are heat resistance temperature of 250 degrees C or higher and tensile strength of 240 kg/mm{sup 2} or more for the FRPs, and heat resistance temperature of 450 degrees C or higher and tensile strength of 150 kgf/mm{sup 2} or more for the FRMs. This R and D program has been implemented for 8 years for development of raw materials, molding/processing techniques, quality evaluation and designs through information exchange and discussions of the experts in each area under integrated, close cooperation from raw materials to molding/processing. Most of the data indicate that the target properties and objects are satisfied or exceeded. It is therefore concluded that this project for the composite materials, extending for 8 years in 3 phases, has sufficiently achieved the initial objects. The unique techniques are incorporated in the raw materials, molding/processing processes, quality evaluation and designs. These efforts have produced the FRPs and FRMs of the world highest qualities. (NEDO)

Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

Research and development of basic technologies for next generation industries, 'electrically conductive polymeric material'. Evaluation on first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Dodensei kobunshi zairyo (daiikki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The research and development in the first term has searched widely different kinds of raw materials, elucidated electricity conduction mechanism, discussed processing technologies and evaluation methods. It also included molecule designing to develop new raw materials. A method for growing good single crystals of charge migrating complexes was developed, and (BEDT-TTF){sub 2}I{sub 3} crystals were found to manifest superconductivity at 8K under pressure of 1.3 kbar. In addition, elucidation was made on conduction characteristics of (TMTSF){sub 2}ClO{sub 4} being an induction superconductor, and on its superconduction mechanism. Polyacetylene films oriented at a high level by epitaxial polymerization were synthesized, the carrier hopping mechanism of polyacetylene was proposed, and the direction of increasing the conductivity was shown. It was discovered that cyanoacetylene is thermally polymerized at a relatively low temperature, turning into polymer with good orientation and easily into graphite. Polymeric intermediates soluble to polyparaphenylene vinylene (PPV) were synthesized, whereas these intermediates were found to have shaping and stretching properties, and conductivity of 2.8 times 10{sup 3}s/cm was obtained in PPV doped after the stretching. (NEDO)

Fiscal 2000 pioneering research report on the basic technology for novel DNA drug creation using anti-gene engineering; 2000 nendo anti gene kogaku ni yoru shinki DNA drug soshutsu kiban gijutsu chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research is conducted concerning the possibility of anti-gene engineering basic to the application of DNA (deoxyribonucleic acid) drugs capable of serving as functional DNAs to the control of the expression of industrially useful substance producing genes or of anomalous genes and concerning the possibility of novel industry creation on the strength of the said engineering. The specific research items are described below. Technical seeds are investigated relating to the tissue- and cell-specific drug delivery system for the expression of the molecular device function of the DNA drug. Concerning molecular target technologies such as the anti-sense method, possibilities are studied of utilizing the currently available technical seeds for the eventual creation of novel industries. Concerning novel designing methods utilizing genome information such as SNPs (single nucleotide polymorphisms), investigations are conducted to determine if they would help novel technology development and novel material development. The domestic state is surveyed in relation to DNA drugs, and possibilities are investigated of novel substance production and novel medicine creation with the aid of anti-gene engineering. (NEDO)

Investigations in fiscal 1983 on promotion of geothermal development. Part 1. Report on investigation of fumarolic environmental effects in Oku-Aizu area; 1983 nendo chinetsu kaihatsu sokushin chosa. 1. Okuaizu chiiki funkichu kankyo eikyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-01

As part of the investigations on promotion of geothermal development, surveys have been carried out in the Oku-Aizu area to identify the existence and/or extent of effects of collecting geothermal fluids above the ground imposed on the environment, such as the natural ecological system. The investigated area is an area of 60 km{sup 2} covering Kawanuma County and Onuma County in Fukushima Prefecture, a mountainous area with undulations. The investigation result may be summarized as follows: the area shows the inland climate and has snow fall as much as 2 m in winter; according to the H2S diffusion prediction, the concentration thereof on the land in seasonal average is 0.7 ppm at maximum, which is a value presenting no problems. No fumarolic effects of SO2 were identified, and floating dust and Hg showed values that present no problems. With regard to water quality during and after the blowout test, no effects of blowout return were identified. The noise level was 41 to 45 phones at a place 100 m distant, and the vibration level has become the lower detection limit at a place 50 m distant. Leveling has discovered no ground movement. No variation in major constituents in thermal spring water was verified before and after the blowout test. (NEDO)

Fiscal 1999 geothermal development promotion survey. Development potentiality survey - Strategic survey/nation-wide survey (Report on districts in Fukushima Prefecture); 1999 nendo chinetsu kaihatsu sokushin chosa. Kaihatsu kanosei chosa - senryakuteki chosa zenkoku chosa (Fukushimaken chiiki hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-01

For the effective implementation of the survey, data in existence were reanalyzed for the Bandai-Azuma district and Minami-Aizu/Nasu district, and a wide area geothermal model was built. Using the model, exploitable resources were assessed and a prioritized survey introduction program was worked out for the promotion of geothermal development. In compliance with the strategic survey implementation manual, the Bandai-Azuma district was assessed, and the northeastern-eastern foot area of Azuma Volcano and the northern foot area of Adatara Volcano were extracted as areas promising geothermal energy development. The Monte Carlo method was applied to the prioritized survey area at the northeastern foot of Azuma Volcano, and then it was estimated that, with a probability of not less than 90%, the exploitable resources would be 6.4MWe in the case of data accuracy of 0.5 or more and 12.0MWe in the case of data accuracy of 0.4 or more. Selected as promising areas in the Minami-Aizu/Nasu district were the Yanaizu-Nishiyama area, the neighborhood of Nasudake-Chausudake, and the neighborhood of Shiobara-Fuji. (NEDO)

FY 1999 report on the data processing of the geothermal development promotion survey. No. B-6 Tsujinodake area (Tertiary); 1999 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.B-6 Tsujinodake chiiki (dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

For the purpose of confirming the existence of geothermal reservoirs, this survey was conducted as Survey B in the range of 30km{sup 2} east of Lake Ikeda at the south east end of Satsuma Peninsula, Kagoshima pref. from FY 1997 to FY 1999. By the geology/alteration zone survey, fluid geochemical survey, electromagnetic survey and gravity survey which were conducted in FY 1997 as surface survey, the following three were extracted as the areas which have great potentiality of geothermal resource existence: 1) area along the Yamakawa-Matsugakubo structure line on which calderas and explosion craters lie (north part); 2) area along the Takeyama-Tsujinodake structure line on which Ata central dome volcanic rocks lie (central part); 3) area around Kozukahama where the south wall of the Ata caldera extends in east-west direction (south part). In the survey after that, in north part, it was considered that aquicludes in clayey alteration zone were widely distributed around levels of 100m above - 200m below sea level and there existed geothermal reservoirs under the aquicludes. It was presumed that the mixed water of sea water and surface water was thermally conducted by heat sources of 300-490 degrees C and geothermal reservoirs of 260-270 degrees C were formed. (NEDO)

Fiscal 1999 geothermal energy development promotion survey. Report on survey of structural boring (No. B-7 Kuwanosawa area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kozo shisui chosa koji oyobi kaiseki hokokusho (No.B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

Borehole N11-KN-1 was digged and investigated for clarifying the geothermal structure of the Kuwanosawa area, with attention fully paid to the existing survey results. The hole is inclined, 1,802.30m deep in total, with a casing pipe installed down to the 1,101.76m level. Temperature was measured and electrical logging was performed at levels 410m, 1,110m, and 1,802.23m while the hole walls were still exposed bear. The maximum temperature of 161 degrees C was observed at the hole bottom, and the product of permeability - layer thickness transmission coefficient was described by 3.72 to 4.75 times 10{sup -1} darcy.m. The geothermal structures in presence in the south-western part of the survey area and along the Wasabizawa fault were made clear, and it was found that there exists no high-temperature water system in the vicinity of borehole N11-NK-1. As tasks for the future, it was proposed that a geothermal survey of the south-eastern part which includes borehole N57-YO-2 and a geochemical survey of fluids including hot spring water and surface be conducted. (NEDO)

FY 1998 report on the comprehensive analysis in the geothermal development promotion survey. Tertiary. No.C-3 Akinomiya area; 1998 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No.C-3 Akinomiya chiiki (Dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-01

The geothermal development promotion survey was conducted in the Akinomiya area, Ogachi county, Akita prefecture, and the FY 1998 results were summed up. In the surface survey, geology/electromagnetism/precision gravity survey was made as supplementary survey, and re-analysis of 3D models was made. In the well survey, three wells of N10-AY-6 to N10-AY-8 were drilled to conduct the core examination, temperature/pressure logging, sampler logging, short-term jetting test, etc. Also conducted were the reservoir evaluation, environmental effect survey, etc. by pressure monitoring and water level observation. The results of the comprehensive analysis predict the following. In the Akinomiya area, there exists heat source in deep parts around Mt. Yamabushi-dake and Mt. Takamatsu-dake; Being given heat from this heat source, rocks, ground water and volcanic gas react on each other to form geothermal fluids. It is presumed that high temperature geothermal reservoirs exist in the east of the area. Moreover, the pressure distribution indicates that the Akinomiya reservoir and Wasabizawa reservoir can be a chain hydraulically. On the other hand, the west of the area is the low temperature and heat conductive area, and therefore, there seem to be no high temperature fluids there. (NEDO)

FY 1999 report on the comprehensive analysis of the geothermal development promotion survey. Forth. No.C-3 Akinomiya area; 1999 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No. C-3 Akinomiya chiiki (Dai 4 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

As part of the geothermal development promotion survey, the comprehensive analysis was made on the survey of the existence amount of geothermal resource in the Akinomiya area, Ogachi town, Akita prefecture, which was conducted in FY 1999. In the evaluation of reservoirs, the following were carried out: comprehensive analysis of various data on the surface survey, well exploration, etc., which were stored in surveys from the primary to the forth, modification/construction of geothermal system models, numerical simulation using 3D models, etc. In the long-term jetting test, production/reduction tests were conducted using N9-AY-3 and N10-AY-8 as production wells and N8-AY-1 and N10-AY-6 as reduction wells. The results of the comprehensive analysis were outlined as follows. The distribution of high temperature zones promising as areas for geothermal development was grasped. The distribution of the main fracture structure underground was grasped. A total amount of 124t/h steam was confirmed by short/long term jetting tests. In the simulation of prediction of production, the result was obtained that there was potential power generation of 30MW in the Akinomiya area alone and 60MW both in the Akinomiya area and the Wasabizawa area. (NEDO)

Fiscal 1999 geothermal development promotion survey. Structural boring survey work and analysis report (No.B-6 - Tsujinodake area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kozo shisui chosa koji oyobi kaiseki hokokusho (No.B-6 Tsujinodake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

Cuttings from bores N11-TD-2 and N11-TD-3 drilled for the purpose of confirming the existence of geothermal resources in the Tsujinodake area were examined and tested, and the results of temperature logging, electrical logging, and water injection tests carried out during the structural boring work were analyzed. Activities were conducted in the four fields of (1) test boring work, (2) survey and measurement, (3) core cutting examination, and (4) comprehensive analysis. In bore N11-TD-2 positioned in the northern part of Tsujinodake, a sharp temperature rise was detected in the clay converted alteration zone between 200m above sea level and 200m below sea level. A high temperature of 215 degrees C was recorded at 200m below sea level, and it was found that high temperature geothermal water was in reserve at the bottom of the clay converted alteration zone between 100m above sea level and 200m below sea level. In bore N11-TD-3 in the southern wall of the Ata caldera, a convection type low temperature profile was observed at a shallow level and low temperature convection of underground water was detected there. (NEDO)

FY 1992 report on the survey of geothermal development promotion. Geochemical survey (No. A-1 - Haneyama area); 1992 nendo chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. Chikagaku chosa hokokusho (No. A-1 Haneyama chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

For the purpose of studying an expanse and characteristics of the geothermal system and a possibility of geothermal development in the Haneyama area, Oita Prefecture, geochemical survey was conducted. In the survey, various kinds of analyses were made for 13 specimens of hot spring water and 5 specimens of surface water in the area of about 280km{sup 2} at 402 measuring points of the concentration of Hg in soil gas. The results of the survey were as follows: In this survey area, it was thought that the HCO{sub 3} type geothermal water of a comparatively low temperature which was heated by the wide-spread conduction heat from the depths was widely distributed deeper than the depth of 500-700m, and it was presumed that a possibility was low of existence of a high geothermal potential which can be used for the geothermal power generation in the part deeper than the drilling depth of 700m. In the Noya area in the southwest part of the survey area, the high temperature deep geothermal reservoir was confirmed. In this area, the high temperature neutral-alkalescent Cl-SO{sub 4} type geothermal water was distributed in the depth of several 100 meters or deeper. The geothermal water seemed to flow from NE to SW along the structure in the NE-SW direction, and it was concluded that the area was the most promising one. (NEDO)

FY 1992 report on the survey of geothermal development promotion. Geochemical survey (Survey of geothermal water) (No.36 - Hongu area); 1992 nendo chinetsu kaihatsu sokushin chosa. Chikagaku chosa (Nessui no chosa) hokokusho (No.36 Hongu chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-07-01

The test on jetting of geothermal water by the induced jetting, sampling of geothermal water and analysis/survey were carried out in the structure drilling well of N4-HG-2 in the Hongu area, Wakayama Prefecture. The induced jetting of the well was conducted by the Swabbing method up to the total pumping amount of 459.9m{sup 3} that is equal to about 24 times as much as the inner quantity of the well, but it did not result in jetting. The maximum temperature of geothermal water was 65.6 degrees C, pH was 6.6-7.5, electric conductivity was 2,800-2,900 {mu}S/cm, and Cl concentration was 500-700ppm. The geothermal water was classified into the HCO{sub 3} type that is neutral, and the spring quality and liquidity were the same as those of existing hot springs in this area. In the Hongu area, the distribution of new volcanic rocks has not known. The K-Ar age of quartz porphyry intrusive rocks was made about 13Ma, and it was considered that a possibility was low of the rocks being heat sources of geothermal activities. It was also considered that the geothermal water/hot spring water in this area, which originate in the surface water, were heated in heat transfer by magma activities in the deep underground and were flowing forming a small scale of hydrothermal convection system. (NEDO)

Survey on acceleration of geothermal development in fiscal 1998. Report on survey for influence on environment (No. B-7, Kuwanosawa district); 1998 nendo chinetsu kaihatsu sokushin chosa.Kankyo eikyo chosa hokokusho (No. B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-01

A survey was performed on the current situation in the Kuwanosawa district in Akita Prefecture to identify influence on the surrounding environment due to drilling of geothermal structure testing wells. The survey on animals covered mammals of five divisions, 10 families and 19 species, Aves of ten divisions, 25 families and 73 species, reptiles of one division, 3 families and 6 species, Amphibia of two divisions, 6 families, 9 species, and Insects of 17 divisions, 179 families and 719 species. Precious animals of a several species including black salamander were identified. In the plant survey, 132 families and 670 species were identified, with several species listed as the precious plants. In the survey of hot springs, those at three locations were all high-temperature hot springs at as high as 53.8 to 96.9 degrees C. Amount of discharge, pH and electrical conductivity differ largely by the hot springs. The hot spring in Takamatsu did not show large variation throughout the survey period. The Ogura Inn at Doroyu Spa has small variation in pH and hot spring temperature, but large variation in the amount of discharge and Al{sup 3+} concentration. Correlation was recognized between hot spring temperature and amount of discharge, between hot spring temperature and anion, between amount of discharge and electric conductivity, and between amount of discharge and anion. (NEDO)

Fiscal 1998 geothermal development promotion research. Survey in Akinomiya area (N9-AY-3 short-term blowout test report); 1998 nendo chinetsu kaihatsu sokushin chosa. Akinomiya chiiki chosa (N9-AY-3 tanki funshutsu shiken hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

As a part of the fiscal 1998 geothermal development promotion survey in Akinomiya area, this test was carried out to obtain the fumarolic gas characteristics and fluid properties of N9-AY-3 test well by air reaction method. Blowout hot water was reinjected to N8-AY-1 test well drilled in fiscal 1996 to confirm its reinjection capacity. The fumarolic gas test result showed a steam volume of 35.0t/h and hot water volume of 160.8t/h (wellhead pressure equivalent) at a wellhead secondary valve opening of 33.7% and wellhead pressure of 15.3kg/cm{sup 2}G. The whole hot water volume of 30,214m{sup 3} is equivalent to nearly 320 times more than a well volume. Hot water showed pH7.7-8.6, an electric conductivity of 3,960-7,070{mu}S/cm, and chlorine ion concentration of 1,050 mg/l. Alkalescent Na-Cl system hot water showed a geochemical temperature of 283 degreesC. A steam gas concentration including CO{sub 2} as main component was 0.12-0.19vol%. Blowout hot water was continuously reinjected into N8-AY-1 well from a pit by pump to confirm its reinjection capacity. The reinjection capacity of hot water in fumarolic gas was 110t/h without any problem. (NEDO)

Fiscal 1999 geothermal development promotion survey report. Structural boring survey work and analysis (No. B-5 - Musadake region); 1999 nendo chinetsu kaihatsu sokushin chosa. Kozo shisui chosa koji oyobi kaiseki hokokusho - No. B-5 Musadake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

For geothermal development in the Musadake region, Shibetsu-gun, Hokkaido, structural boring was carried out and boreholes were inspected. In the structural boring survey, borehole N11-MD-3 was drilled as deep as 2,001.18 m, and borehole N11-MD-4 2001.44 m. Performed or tested for each of the two boreholes were temperature logging, electrical logging, temperature recovery, reinjection, core cutting examination, and so forth. The result of the temperature logging shows that temperature rise is slower at levels deeper than 1280 m in borehole N11-MD-3, with the maximum temperature marking 274 degrees C, and, in borehole N11-MD-4, the maximum temperature is 198 degrees C. No reinjection test is carried out because the ground pressure is too high to allow the replacement of the borehole content with fresh water. Analysis results lead to a conclusion that the hot fluid in this region originates in fossil seawater and in meteoric water, the latter arriving after a long-term permeation process, heated by thermal conduction to 270 degrees C or higher. It is inferred that the geothermal fluid flows in a fissure in the vicinity of the Musadake/Mt. Shitabanupuri fault and a fault orthogonally crossing the said fault for the formation of a high-temperature geothermal storage. (NEDO)

Report on the surveys in fiscal 1999 on the summary of new energy proliferation and promotion policies in the U.S.A.; 1999 nendo Beikoku ni okeru shin energy fukyu sokushin seisaku no gaiyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the surveys in fiscal 1999 on the summary of new energy promotion policies in the U.S.A. The ratio of regenerative energies to all energy in the U.S.A. is 10%. On the other hand, efforts are given on marine energy investigations, and to make hydrogen useful as one of the energy sources. The Matsunaga hydrogen research and development act was enacted in 1990, and so was the hydrogen's future act in 1996 to move positively forward the development thereof. The federal government has announced positive use of substitution fuel using automobiles in the presidential ordinance, whereas the ratio of the substitution fuel cars accounted for in those used by governmental organizations is planned to be 75% in fiscal 1999. At the Kyoto Conference for Global Warming-up Prevention, America was obligated to reduce by 2012 the greenhouse effect gas by 7% against the generation in 1990, but it rejected the proposition saying the country is unable to approve it without participation of developing countries. In 1998, America announced the collective national energy strategy, and recommended utilization of regenerative energies to prevent climate changes. In April 1999, President Clinton issued the plan for governmental greening, and ordered suppression of generation of air polluting substances. In August of the same year, a presidential ordinance was promulgated on developing and promoting use of the bio-energies. (NEDO)

FY 1999 report on the data processing of the geothermal development promotion survey. No. A-4 Kunbetsudake area (Secondary); 1999 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.A-4 Kunbetsudake chiiki (dai 2 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

This survey studies possibilities of geothermal resource existence by checking the presence of high temperature anomaly by a wide-area survey with the aim of extracting the area for Survey B and Survey C to be conducted. The area for survey is an area of approximately 300km{sup 2} including Shibetsu town, Shibetsu county, and Rausu town, Menashi county, which are located east of Hokkaido. Conceptual models of the geothermal system in this area which are thought of from the results of the survey are as follows. It is assumed that heat source exists deeply in Unabetsudake (Mt. Unabetsu). From the fact that the K-Ar method age of the ejecta is 0.5Ma and the TL method age of the rate. (NEDO)ch the position of drilling of the well for survey of heeffective as heat source. It is thought that the water of hot spring/mineral spring came to indicate various spring qualities by mixture of meteoric water and fossil seawater at various ratios. The fossil seawater and old meteoric water are being heated by thermal conduction. The mixture with the original water of Kawakita hot spa is recognized in Shibetsu Kanayama hot spa. It is assumed that the high temperature area exists mostly in Unabetsudake, but the spread does not reach the position of drilling of the well for survey of heat flow rate. (NEDO)

FY 1992 report on the survey of geothermal development promotion. Gravity prospecting (No. A-1 - Haneyama area); 1992 nendo chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. Juryoku tansa hokokusho (No. A-1 Haneyama chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

For the contribution to elucidation of the geothermal structure in the Haneyama area in Oita Prefecture, gravity prospecting was conducted. Survey was carried out in the area of about 280km{sup 2} at 205 measuring points, and analysis was made altogether with the existing 3,273 gravity measuring points. As a result, the following were made clear. The gravity basement forms the fault-state structure that sinks several 100 meters to the south side on the line from the south edge of the Higashi-shiiya ridge to Mt. Kurotake - Mt. Daigansen - Amagase hot spring in the SW direction. This fault was made correspondent to the Beppu north fault on the east side of Mt. Kurodake. Each of the following regions is the region where the fault-state structure that predicts the development of fracture and the area of distribution of alteration zone that can be cap rock overlap each other: NW edge of Shishimuta sedimentation zone - Machida alteration zone distribution area; N edge of the Shishimuta sedimentation zone - Ibushi alteration zone/Noya alteration zone distribution area; Vicinity of Mt. Kurodake - Hijiu alteration zone distribution area. It seems that the above-mentioned regions have high potentiality of geothermal exploration. The region where new igneous activities are seen, which is near the heat source, is important for exploration. The distribution area is seen near the west of the Mizuwake Pass ridge. (NEDO)

Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region (International Symposium `98); Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In Japan and Asian countries, the optimized treatment of industrial waste is the problem with the economic growth. Border-crossing movement of the waste for promotion of the renewable use is also a problem. Therefore, the International Symposium `98 on the industrial waste problem in the Asian region was held. China, Thailand, the Philippines and Korea were invited to Japan to give lectures. MITI of Japan reported on the present situation of Japan and the cooperation with Asian countries. The industrial circle reported on efforts for environmental protection measures to be taken, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention on recycling activities, Japan`s role in Asia, etc. In the panel discussion, promotion of cooperation for recycling technology and Japan`s support for formulating strategy on the industrial waste were requested to Japan, and the construction of an Asian area network was proposed. Concerning the cooperative system between governments and private companies, it was concluded that it was necessary to discuss it considering the actual state of each country. Importance of recycle and information exchange was realized again. 10 refs., 15 figs., 27 tabs.

Report on the finally obtained results of the study of the basement technology for environmentally friendly type metal base material regenerative utilization; Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu saishu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

For the purpose of contributing to the resource recycling and global environmental preservation, the R and D of metal base scrap regenerative utilization technology were conducted, and the report on the finally obtained results was summed up. As to the technology to remove impurities by the solid phase treatment, the Cu removal rate of more than 96% was made possible by the low temperature fracturing technology, and that of more than 90% by the hue difference discrimination separation system technology. From the results of the FS on the low temperature fracturing technology applied to car scraps, it was found out that the present price condition is not economically efficient in the present price condition, but a possibility of achieving the removal rate of 54% in the initial plan was obtained if applying the hue difference discrimination separation system to the pretreatment. Concerning the Sn removal, the Sn removal rate of more than 70% was obtained by the gaseous phase sulfuration method, and that of more than 50% was obtained in Sn removal/Cu removal/Zn removal by the oxidation reaction method. The targets were achieved. Relating to the treatment of impurities by melting (liquid phase), the Cu removal/Sn removal technology under reduced pressure was effective in vacuum melting furnace of 2-ton scale, but the needs for the development of large capacity plasma torch were recognized in that of 40-ton scale for practical use. (NEDO)

Research and development of basic technologies for next generation industries, 'composite materials'. Evaluation on final research and development (final report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (saishu kenkyu kaihatsu hyoka 3)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

This paper carries the specifications for advanced composites in the investigation (SACOI), and lists the titles and organizations and persons in charge. The paper describes the specifications for test and measurement methods for each title. The titles are: testing methods of matrix resins for carbon fiber reinforced plastics, measurement method for thermogravimetry and glass transition temperature for the same plastics, measuring methods for specific gravity, fiber and void contents of carbon fiber reinforced plastics, testing methods for tensile properties, compression properties, apparent interlaminar shear strength, tension fatigue, interlaminar fracture toughness, crack propagation, high velocity impact, izod impact, and environmental resistance for the same plastics, evaluation methods for hot-press formability of prepreg, autoclave formability of prepreg for the same plastics, measuring methods for tex count, density, and fiber volume fraction of wire preform, testing methods for tensile strength at room temperature, tensile strength at elevated temperature of wire preform, measuring methods for thermal expansion coefficient, tension properties, compression properties, tensile shear strength, interlaminar shear strength, in-plane shear strength, tensile fatigue, high velocity impact and regular impact of wire preform. (NEDO)

Report on the achievements in fiscal 1999 of research and development of fusion zones. Volume 1. Next generation light beam foundation technology; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 1. Jisedai hikari kiban gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to develop a high-speed high-density light beam recording technology by application of proximity field light, researches were performed on a flat opening type proximity field head, a recording and replaying system for the super lens, the materials thereof, proximity field optical elements, and the application to lithography. As a result of the researches, development was made on a promising light scattering super lens, whose noise level is low and the carrier is stable. Deterioration of the replay signals in association with repeated read-out is caused by instability of the recording film. It was verified, however, that more than 60,000 read-outs are possible by adding oxygen into the recording film material to raise the crystallization temperature. Application of the super lens to organic thin film recording utilizing thermo-chromism was verified to be effective. In discussing the application of the super lens to lithography, a possibility was confirmed to expose a resist film through the super lens structure. A simulation program for the proximity field light was developed, and new findings were acquired. (NEDO)

Research and development of basic technologies for next-generation industry. Ultimate evaluation report on research and development of highly crystalline polymeric material; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokesshosei kobunshi zairyo saishu kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-05-01

Basic technologies are developed involving highly crystalline polymeric materials comparable to metals in dynamic property even when used singly. The aim is to expand the application scope of polymeric materials including those designed as structural materials so that their light weight, high resistance to corrosion, and excellent machinability may be utilized in various fields. Target performance includes an elastic modulus under bending force of 100GPa or more in anisotropic materials and 50GPa or more in isotropic materials, a linear expansion coefficient of 5 times 10{sup -5}/degrees C or less, and a thermal deformation temperature of 180 degrees C or more. Tasks faced in relation to film or molded articles of anisotropic materials are the rigid molecular design, molding method including molecular orientation control, and molecular complex technology; and, in isotropic materials, the strengthening of interaction between molecules, establishment of molding methods, and equipping materials with high machinability. After a 10-year/3-phase development endeavors, the initially intended goals are sufficiently achieved. To be mentioned are achievements involving the generation of multidimensionally bound diacetylene polymeric crystals, higher elastic modulus and moldability provided to polyarylate materials, magnetic field orientation, ultrahigh-elasticity layered body, and organic-inorganic ionically bonded complex material, etc. (NEDO)

Research and development of basic technologies for the next generation industries, 'light-reactive materials'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'hikari hanno zairyo'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to light-reactive materials that control the structures and status of aggregation of molecules by using actions of light, and can be used for ultra-high density recording, high resolution indication and light switches. In elucidating the mechanism of light deterioration reaction of photochromic molecules, it was disclosed that 6-nitrospirobenzopyran has the light deterioration caused from the excitation triplet state. This disclosure presents a possibility of preventing the light deterioration. New derivatives that show photochromism were synthesized, and thin films were produced by using the LB process. This indicates a possibility of producing the photochromic materials as the high multiplex recording material. With regard to PHB materials, an evaluation technology having spectrum resolution of the world's highest level was established and measurements were performed. Hole formation was verified for the first time in the world at the temperature higher than the liquid nitrogen temperature by using a PHB material of ionic porphin/polyvinyl alcohol systems. This verification indicates a feasibility of practically usable PHB materials. (NEDO)

Research and development of basic technologies for the next generation industries, 'light-reactive materials'. Evaluation on the second term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'hikari hanno zairyo'. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research and evaluation was performed with an objective of establishing the basic technology related to light-reactive materials that control the structures and status of aggregation of molecules by using actions of light, and can be used for ultra-high density recording, high resolution indication and light switches. In elucidating the basic characteristics of photochromic materials, a non-destructively readable recording system was proposed and demonstrated, highly durable and high-functional photochromic compounds were developed, and a number of material design guidelines were accumulated to realize characteristics required in light-beam recording. With regard to development of the photochromic materials, realization of photochromic thin films that can record wavelengths in multiplex manner has become more realistic. For elucidating basic characteristics of PHB materials, a method for evaluation from a number of directions including the time method for photon echo was established in addition to the conventional frequency recording characteristics. Regarding the elucidation of the PHB phenomenon, demonstration was carried out on intermediate zone structure control in diversified material systems including living organism substances, where a large number of findings were accumulated. (NEDO)

Research and development of basic technologies for the next generation industries, 'ultra-grid elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'chokoshi soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to ultra-grid elements. With regard to the process technology to search materials suitable for the targets of ultra-grid elements and manufacture ultra-grid element structure, a technology has been completed, by which crystalline growth is performed while controlling AlAs and GaAs at atom layer levels by using the MBE process and MOCVD process. This has allowed the understanding to be progressed on behavior of electrons in hetero interface or very thin films. It has also become possible to acquire new crystals that have band gaps and grid constants matching the performance of the elements. Regarding ultra-grid functional elements, new functional elements with the HET and RHET structures were made by utilizing the characteristics of the ultra grids, and performances of normal temperature operation and high speed operation were investigated. The ultra-grid structured elements have made it possible to embed ultra fine electrode structure into crystals by means of double hetero growth, and a possibility of Si-based PBT was demonstrated. These achievements lead to a belief that the targets intended at the beginning of the present research have been achieved. (NEDO)

Achievement report for fiscal 1997. Technological development for practical application of a solar energy power generation system/development of technology to manufacture thin film solar cells (development of technology to manufacture materials and substrates (development of technology to manufacture high-quality amorphous materials and substrates)); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu, zairyo kiban seizo gijutsu kaihatsu (kohinshitsu amorphous kei zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

These technological developments are intended to develop technologies to manufacture with improved quality the silicon-based thin film solar cells. In order to analyze manufacturing conditions for micro crystal silicon thin films as the narrow-gap amorphous silicon-based films, films were manufactured in the vicinity of borders of amorphous/micro crystal silicon film manufacturing conditions. The present film manufacturing did not present effects of suppressing deterioration of hydrogen diluted light. In order to elucidate the light deterioration mechanism in hydrogenated amorphous silicon films and study the suppression thereof, discussions were given on impurities in the film, including oxygen. By using an ultra high vacuum plasma CVD having a thoroughgoing baking system, an oil-free exhaust mechanism, and a raw material gas refining mechanism, impurities were added to and removed from a reaction vessel, and an ultra-high purity Si:H film was manufactured, which has been removed of impurities from the raw material gas, resulting in reduction of O, C and N standing no comparison. According to the result of a light irradiation experiment on an ultra-high purity film obtained under an accelerated deteriorating condition by using a pulse laser, the model assuming the light induced defect and the pair of impure atoms has been denied. (NEDO)

Report for fiscal 1998 on industrial waste optimized treatment technologies dissemination and promotion business for asian region. Holding a symposium; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

An International Symposium on the Asian Industrial Waste Issue was held in Tokyo on 4 February 1999, where lectures were delivered by participants representing China, the Philippines, Thailand, Malaysia, and Japan. More 150 people attended the event, with questions and answered animatedly exchanged between the lecturers and the audience. The progress of urbanization is quite rapid in China, with the quantity of waste increasing every years to justify the anticipation that there will be a very sharp increase in refuse incineration in the near future. Raising a serious problem in China these days is the plastic waste. In the Philippines, there are no private-sector waste treatment/disposal facilities and corporations are not obliged to take care of their waste. Consequently, very little treatment or recycling is being undertaken. In Thailand, although waste treatment/disposal centers are in operation financed by the Government and private sectors, the cost is very high, and the Government policy is that private investment will be encouraged and supported in future. In Malaysia, privatization is in progress of the business of managing waste in the solidified form. A comprehensive waste treatment/disposal plant was completed in 1998 by the endeavors of a Denmark-Malaysia consortium, and is in operation since then. (NEDO)

FY 1999 geothermal development promotion study. Report on results of the elastic wave exploitation (reflection method) in No.B-5, Busadake area; 1998 nendo chinetsu kaihatsu sokushin chosa. Danseiha tansa (hanshaho) hokokusho No.B-5 Busadake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are results of the elastic wave exploitation (reflection method) conducted in the Busadake area in Hokkaido to elucidate the geological and geothermal structures. The elastic wave exploitation used large-size vibrators, an explosive and 4 courses of traverse (total length: 25.675 km, number of vibration-receiving points: 1,031, and number of vibration source points: 342). The data were processed by the standard procedure of the common reflection synthesis method. The acoustic velocity logging data, collected at the structural drillings N10-MD-1 and N10-MD-2, were synthesized to have the reflection seismic records. The existing surface geology, drilling geology and gravity data were compared with the recorded deep sections for the comprehensive discussion, to extract the reflection horizon corresponding to the geological boundary, and investigate the relationships of the discrete lines of deposit structures, unconformity relations and reflection with geological and default structures determined by the data analysis. The study results of the geothermal structures suggest possible formation of the geothermal reservoir deep in the west of the default found by Line-1, based on the observed temperature structures at the drilling N7-SB-1. (NEDO)

General evaluation survey report on fiscal 1998 investigation of geothermal development and promotion. No.C-3 Akinomiya area (Third); 1998 nendo chinetsu kaihatsu sokushin chosa sogo hyoka chosa hokokusho. No.C-3. Akinomiya chiiki (dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-01

With Akinomiya area (11.4 km{sup 2}) selected in Akita prefecture as the survey C area in fiscal 1996, the first survey was conducted. This paper is a summary of memorandum from an advisory standpoint on the evaluation survey concerning the fiscal 1998 investigation results. The contents of the survey are geological investigation, precision gravity exploration, soil gas investigation, electromagnetic exploration, fluid chemical investigation, well drilling and short-term eruption test. An alteration zone was recognized around the place where clay minerals used to be mined, with the center of the zone situated 500-600 m east of a fault. The alteration condition of Akinomiya area seems to be different from that of Doroyu Wasabisawa area. The supplementary gravity survey was carried out at total 58 points in fiscal 1998. It is desirable to set supplementary measuring points over a wide surrounding area for a depth structure analysis. Also performed was a study of mercury concentration in the soil gas. While CSAMT and TDEM methods were employed for the electromagnetic exploration, a suitable method should be carefully selected for a wide area high-density exploration. Consistency with adjacent areas is essential in preparing investigation items particularly for a geothermal model. (NEDO)

Corrosion resistance and protection mechanism of hot-dip Zn-Al-Mg alloy coated steel sheet under accelerated corrosion environment; Yoyu Zn-Al-Mg kei gokin mekki koban no sokushin fushoku kankyoka ni okeru taishokusei toi boshoku kiko

Energy Technology Data Exchange (ETDEWEB)

Komatsu, A.; Izutani, H.; Tsujimura, T.; Ando, A.; Kittaka, T. [NKK Corp., Tokyo (Japan)

2000-08-01

Corrosion behavior of hot-dip Zn-6%Al 0-3%Mg alloy coated steel sheets in cyclic corrosion test (CCT) has been investigated. The corrosion resistance was improved with increasing Mg content in the coating layer, and the highest corrosion resistance was observed at 3% Mg. In Zn-6%Al-3%Mg alloy coated steel sheet, the formations of zinc carbonate hydroxide and zinc oxide were suppressed for longer duration compared with Zn-0.2%Al and Zn-4.5%Al-0.l%Mg alloy coated steel sheets. As a result, zinc chloride hydroxide existed stable on the surface of the coating layer. From the polarization behaviors in 5% NaCl aqueous solution after CCT, it was found that the corrosion current density of Zn-6%At-3%Mg alloy coated steel sheet was much smaller than those of Zn-0.2%Al and Zn-4.5%Al-0.1%Mg alloy coated steel sheets. As zinc carbonate hydroxide and zinc oxide had poor adhesion to the coating layer and had porous structures, these corrosion products were considered to have little protective action for the coating layer. Therefore, it was concluded that Mg suppressed the formation of such nonprotective corrosion products. resulting in the remarkable improvement of corrosion resistance. (author)

Fiscal 1998 report on data processing for geothermal energy development enhancement. No. A-4 Mount Kumbetsu area (primary data processing); 1998 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.A-4. Kunbetsu chiiki (dai 1 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-01

This is part of the state-operated 'geothermal energy development enhancement' project, under which a comprehensive analysis is conducted into the results of a survey of geothermal resources in existence in the Mount Kumbetsu area. The local geothermal structure is examined, and the Kumbetsu hot spring area, the Uebetsu river middle reach area, and the Unabetsu hot spring area are extracted as promising high-temperature supply areas. The Kumbetsu hot spring area and the Uebetsu river middle reach area lie on a heave positioned west of the Mount Musa/Mount Shitabanupuri fault. There is a distinguished bending in the zone of discontinuous resistivity, and, when geology is considered, it is inferred that there exists a geothermal fluid field formed by the Mount Musa/Mount Shitabanupuri fault running NNW-SSW and a fracture zone that runs across the fault. The two areas are located at spots where gravity gradient is sharp. It is concluded that, with the alteration zone, temperature distribution, etc., also taken into account, the Kumbetsu hot spring area is the more promising as a source of geothermal energy. The water of the Kumbetsu hot spring is of the Cl-SO{sub 4} type, 64.5 degrees C hot and neutral, and arises from the depth where water of meteoric origin is heated by heat conduction. The heat source is supposedly the magma reservoir whose eruption once formed Mount Unabetsu etc. (NEDO)

FY 1990 report on the survey of geothermal development promotion. Survey of environmental effects before jetting (No.34 - Kaminoyu/Santai area); 1990 nendo chinetsu kaihatsu sokushin chosa. No.34 Kaminoyu Santai chiiki - Funki zen kankyo eikyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-01-01

For the evaluation of effects of geothermal development on the peripheral environment in the Kaminoyu/Santai area in the southwest part of Hokkaido, survey of the present situation of the environment was made. As a result of the survey, as to the climate of this area, the mean temperature, precipitation, etc. were almost the same as those of the nearest meteorological office of Hakodate, and the wind velocity was lower. Concerning the air, the mean concentration of H{sub 2}S was 0.8-3.6 ppb, SO2 was less than the detectable limiting value, Hg was 0.018-0.12 {mu}g/m{sup 3}N in average, and suspended particulate was 0.014-0.028 mg/m{sup 3}. Each of them satisfied the environmental criteria and the control level. The water quality satisfied the AA type criteria at every point of the river surveyed. The noise/vibration at the time of well drilling were 47-50dB at 10m measuring point and less than the lower limit of measuring at measuring points farther than 50m measuring point/100m measuring point. Every hot spring was drilled and spontaneously welling, and variations in spring temperature/welling amount were comparatively small. Micro earthquakes of 495 were observed in 47 days in total. Besides, survey was made of animals, plants, soils, scenery, etc. (NEDO)

Fiscal 1998 research report. Current state survey for promoting the field test project for introduction of advanced industrial furnaces; 1998 nendo koseino kogyoro donyu field test jigyo ni okeru jigyo sokushin no tame no jittai chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Survey was made on the current state of installation and operation of industrial furnaces mainly in manufacturers to predict the applicability of advanced industrial furnaces, and study was made on energy consumption trends, the energy saving effect of advanced industrial furnaces, and factor extraction for their applicability. In the survey, questionnaires were delivered to 4,597 offices extracted from domestic 50,780 offices with employees more than 30, and nearly 30% of them were recovered, covering nearly 2.6% of all the offices concerned with this survey. As the survey result, the total annual energy consumption of domestic manufacturers was estimated to be 740,949 x 10{sup 6}Mcal, and among it, 709,709 x 10{sup 6}Mcal for large industrial furnaces. Under the assumption that nearly 30% of large industrial furnaces in operation are replaced with advanced industrial furnaces, energy saving expectation is estimated to be 210,000 x 10{sup 6}Mcal. Opinions and demands for this project showed the difficulty in their application to industrial furnaces in operation and study on their effects. Further enlightenment activities are necessary. (NEDO)

Achievement report for fiscal 2000 on investigations and researches on promotion of utilization of waste energies that can deal with environmental load suppression; 2000 nendo kankyo fuka yokusei taio haikibutsu energy riyo sokushin chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This paper describes the achievements in fiscal 2000 in investigating generation mechanisms and suppression of dioxins from refuse incinerators, and in investigating non-bromine flame retardant materials (having a possibility of generating hazardous material such as bromine-based dioxin during combustion). To produce poly-chlorinated dibenzo-para-dioxins (PCDDs)/PC dibenzo furans (PCDFs) (dioxins, but not containing Co-PCB) in a small fluidized bed combustor for simulated refuse derived fuel (RDF), both of chlorine source and hydrocarbon are required. If the primary combustion furnace temperature is high and the air excess rate is low, the concentration of the dioxins increase. In addition, since oxygen shortage in temporal and spatial locals or excessive concentration zone of unburned hydrocarbons imposes great effect, promotion of turbulence mixing is important. In producing dioxins, vaporization from dust due to interference with the combustion gas, and copper and iron catalysts have great effect, whereas SOx in the combustion gas has suppression effect. Flame retardant materials can provide specific flame retardation effect to particular plastics in a temperature zone slightly lower than the combustion temperature. The paper also describes development of new flame retardant materials. (NEDO)

FY 1998 Geothermal development promotion study. Report on results of the elastic wave exploitation (reflection method) in No.B-6, Tsujinodake area; 1998 nendo chinetsu kaihatsu sokushin chosa. Danseiha tansa (hanshaho) hokokusho (No.B-6 Tsujinodake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-01

The elastic wave exploitation (reflection method) was conducted to elucidate the geothermal reservoirs, estimated to exist on the Ata caldera walls in the Tsujino area, Kagoshima Pref. The elastic wave exploitation used large-size vibrators as the vibration sources and 4 courses of traverse (total length: 6.56 km, number of vibration-receiving points: 332, and number of vibration source points: 102). The data were processed by the standard procedure of the common reflection synthesis method. The geological structures were analyzed by comparing the existing geological data with the data obtained at the drilling. The analysis results suggest that the Ata caldera walls considered to exist in the surveyed area possibly correspond to the vicinity of the default existing at the south-east boundary of the collapse structure. The analysis of the geothermal structures suggest that the sheet-shaped intruding rocks, considered to exist at a depth of around 1,000 m in the vicinity of the Kaimon hot spring resort, was possibly formed by the magma ascending along the default. The presence of the magma reservoirs deep below the area is strongly suggested to work as the heat source for the area. (NEDO)

FY 1997 report on the data processing of the geothermal development promotion survey. Primary. No.B-5 Mt. Musadake area; 1997 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No. B-5 Musadake chiiki (Dai 1 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

As part of the geothermal development promotion survey, the comprehensive analysis was made on the survey of the existence amount of geothermal resource in the Mt. Musadake area, Shibetsu county, Hokkaido, which was conducted in FY 1997. In the surface survey, the following were carried out: survey of geology/alteration zone, age determination of rocks, alteration age determination by thermoluminescence method, geochemical survey (hot spring gas, hot spring water), gravity exploration and electromagnetic exploration. In the survey of environmental effects, survey of flora/fauna and survey of hot spring variations were made. The results of the analysis were outlined as follows. The geothermal system in this area seems to be controlled by the Mt. Musadake - Mt. Shitabanupuri fault, folding zone along the fault and Graben-state structure extending southeast of the zone. At deep underground, the existence of the deep geothermal water forming geothermal reservoirs is presumed, and the deep geothermal water seems to be helped by the thermal conduction and volcanic effluences from the magma reservoir related to a series of volcanoes, centered on Mt. Musadake that is regarded as heat source. The geothermal water has a temperature of over 250 degrees C and a high Cl concentration. (NEDO)

FY 1998 report on the data processing of the geothermal development promotion survey. Secondary. No.B-5 Mt. Musadake area; 1998 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No. B-5 Musadake chiiki (Dai 2 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-01

As part of the geothermal development promotion survey, the comprehensive analysis was made on the survey of the existence amount of geothermal resource in the Mt. Musadake area, Shibetsu county, Hokkaido, which was conducted in FY 1997 and FY 1998. In the surface survey, the following were carried out: survey of geology/alteration zone, geochemical survey, gravity exploration, wide-area gravity/magnetic structure analysis, seismic exploration, etc. In the well exploration, structural boreholes N10-MD-1 and N10-MD-2 were drilled, and the following were conducted: temperature logging/temperature recovery test, electric logging, water injection test and survey of core cuttings. For borehole N10-MD-2, the survey of geothermal water was made. In the survey of environmental effects, survey of flora/fauna and survey of hot spring variations were conducted. The results of the analysis were outlined as follows. At deep underground, the existence of the deep geothermal water forming geothermal reservoirs is presumed, and the deep geothermal water seems to be helped by the thermal conduction from the magma reservoir related to a series of volcanoes, centered on Mt. Musadake that is regarded as heat source. The geothermal water has a temperature of over 250 degrees C and a high Cl concentration. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (fine ceramics)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fine ceramics'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-30

The results of the first phase research and development project for developing fine ceramics as the basic technologies of the next generation are evaluated. The R and D themes are selected to develop fine ceramics of high strength, corrosion resistance, precision and wear resistance, noting their excellent characteristics. Development of the basic techniques for these materials is of high significance, and highly rated. The efforts in the first-phase R and D project are aimed at development of silicon nitride and silicon carbide for synthesis of the stock materials; explosive forming/treating the stock powders; forming, sintering and processing/joining; evaluation of the characteristics; non-destructive testing methods; designs; and evaluation of the parts, among others, as the elementary techniques for production, evaluation and application of the fine ceramic materials. The technical targets of improving functions have been achieved, or bright prospects have been obtained therefor in development of the techniques for synthesis of the stock materials, forming/sintering and processing/joining. The silica reduction for stock synthesis, basic techniques for molding/sintering, and rheological considerations for the molding/sintering techniques represent the techniques of the next generation, because they break through the limitations of the conventional techniques. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (resin-based)'. Evaluation of the second phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (jushikei). Dainiki hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-31

The results of the second phase research and development project for developing the resin-based composite materials as the basic technologies of the next generation are evaluated. The second phase (FY 1983 to 1986) project is carried out to achieve the objectives, which are set up based on the objectives for the basic designs and the results of the first phase project. As a result, the concrete (promotion objectives), including those related to mechanical characteristics, have been almost achieved. For development of the highly functional FRP materials, the R and D efforts are directed to improvement of their moldability while satisfying the requirements of high functions, e.g., resistance to heat, leading to development of the basic techniques for epoxy resin-based intermediate materials. These results indicate possibility of commercialization of highly heat-resistant polyimde resin-based and novel resin-based intermediate materials. The results of the novel molding/processing methods, taken up in the second phase project as the ones which use no autoclave, are rated that they are developed to suggest possibility of the eventual commercialization, although the products they give are not always showing sufficient mechanical properties. (NEDO)

Research and development of basic technologies for the next generation industries, 'environment resistance strengthened elements'. Evaluation on the second term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'Taikankyo kyoka soshi'. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-31

In the research and development of the environment resistance strengthened elements with emphasis placed respectively on radiation resistance, heat resistance, and integration degree according to specific requirements in the using environments, the second term has developed an integration technology and its evaluation technology based on the achievements in the first term. In developing the heat resistant element technology, the technology to grow {beta}-SiC crystals was expanded to obtaining thin film crystals with high migratory performance by using higher temperatures. At the same time, development was performed on a technology to manufacture multiple number of transistors on one substrate, such as the doping technology and etching technology. Using this technology, schottky diodes and p-n junction elements being the basic structures of MES-FET and bipolar transistors were fabricated. In the evaluation and testing technology, the {gamma} dose measuring method using TLD was improved, the traceability of {gamma} ray irradiation amount was assured, the simplified irradiation testing method using X-ray was established, and the heat resistance testing technology for electronic parts was established. Furthermore, attempts were made on enhancing radiation resistance of the elements, such as in MOS silicon integrated circuit, bipolar silicon integrated circuit, and compound semiconductor integrated circuit. (NEDO)

Research and development of basic technologies for next-generation industry. Evaluation of 1st-phase research and development of 3-dimensional circuit devices; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Sanjigen kairo soshi daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The aim is to develop basic technologies relating to 3-dimensional circuit devices with an ultrahigh-density accumulation of functions therein for the embodiment of ultra-small high-performance data processing devices or artificial brain-like multiple-function data processing devices. To be developed are laminate-structure devices which have an ultrahigh-density accumulation of logic and memory functions or a complex accumulation of functions including signal and sensor functions. In the 1st phase, importance is attached to the development of a multilayer crystalline structure, which is the most elementary in the development of 3-dimensional circuit devices, and of processing technologies for them. Propositions are made and analyses are conducted relating to the enlargement of exposure region in synchrotron radiation lithography, development of a maskless beam process of a resolution of 0.1{mu}m, development of a focused ion beam device, etc. Recrystallization methods using a laser beam or a linear electron beam are developed for the growth of multilayer crystals, and are proved to be effective. The application feasibility of a flat deposition dry process etc. to laminate processing technologies is demonstrated. Concerning integration technologies, some laminated circuit devices are experimentally fabricated, and their behavior is determined. The goals of the 1st phase are found achieved. (NEDO)

Research and development of basic technologies for the next generation industries, 'environment resistance strengthened elements'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'taikankyo kyoka soshi'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-30

Research, development and evaluation were performed with an objective of developing environment resistance strengthened elements, with emphasis placed respectively on radiation resistance, heat resistance, and integration degree according to specific requirements in the using environments. The objective for the first term is to develop the basic technology on element structures required to raise the environment resistance, and the methods of testing them. With regard to heat resistant elements, {beta}-SiC single crystal thin films were formed, and a prospect was obtained on using them as the elements. Regarding MOS integrated circuit, bipolar integrated circuit, and GaAs element, points presenting the largest issue in radiation resistance were noticed according to respective elements. Thus, temperature for gate oxide film formation was lowered, element structures were improved, and gate lengths were decreased to enhance the radiation resistance. For the evaluation test technology, a provisional testing method was prepared for the radiation resistance, a prototype in-situ irradiation testing device was fabricated and so was a prototype high-temperature testing device usable up to 500 degrees C. These achievements lead to a belief that the targets for the first term have been achieved. (NEDO)

Research and development of basic technologies for next generation industries, 'electrically conductive polymeric material'. Evaluation on first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Dodensei kobunshi zairyo (daiikki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The research and development in the first term has searched widely different kinds of raw materials, elucidated electricity conduction mechanism, discussed processing technologies and evaluation methods. It also included molecule designing to develop new raw materials. A method for growing good single crystals of charge migrating complexes was developed, and (BEDT-TTF){sub 2}I{sub 3} crystals were found to manifest superconductivity at 8K under pressure of 1.3 kbar. In addition, elucidation was made on conduction characteristics of (TMTSF){sub 2}ClO{sub 4} being an induction superconductor, and on its superconduction mechanism. Polyacetylene films oriented at a high level by epitaxial polymerization were synthesized, the carrier hopping mechanism of polyacetylene was proposed, and the direction of increasing the conductivity was shown. It was discovered that cyanoacetylene is thermally polymerized at a relatively low temperature, turning into polymer with good orientation and easily into graphite. Polymeric intermediates soluble to polyparaphenylene vinylene (PPV) were synthesized, whereas these intermediates were found to have shaping and stretching properties, and conductivity of 2.8 times 10{sup 3}s/cm was obtained in PPV doped after the stretching. (NEDO)

Concerning problems of petroleum refining facilities. ; Promote international lateral work sharing, and strengthening of infrastructures in petroleum industry. Sekiyu seisei setsubi mondai ni tsuite. ; Kokusei suihei bungyo no suishin to sekiyu sangyo no kiban kyoka wo

Energy Technology Data Exchange (ETDEWEB)

1991-06-05

This paper discusses how to promote international lateral work sharing and how to strengthen infrastructures in the petroleum industry, as a problem prevailing over the petroleum refining facilities in Japan. Excess distillation facilities have been applied with the disposition policy. However, in view of the supply and demand situation in petroleum products for medium to long term span in the world with the pan-Pacific region as the main concern, that applicable to Japan, and that experienced during the Persian Gulf crisis, the excess facility disposition policy was revised, particularly on white kerosene, of which supply and demand tightness is concerned about, so that production capacities may be increased as required. Japan, a large presence in the international economics, is required to work more positively on petroleum refining facilities located in the oil producing countries and intermediate locations to promote the international lateral work sharing. On the one hand, in order to strengthen the infrastructures in the Japanese petroleum industry, it is necessary to promote rationalization and use at higher efficiency of the oil supply system, and convergence of the the petroleum industry, including joint investments for projects exceeding capabilities of individual enterprises. 3 tabs.

FY 1999 report on the geothermal development promotion survey - Akinomiya area survey. Temperature/pressure logging before the long-term jetting test; 1999 nendo chinetsu kaihatsu sokushin chosa Akinomiya chiiki chosa hokokusho. Choki funshutsu shikenmae no ondo atsuryoku kenso

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-06-01

As a part of the FY 1999 geothermal development promotion survey - Akinomiya area survey, the rising speed/vertical permeability of the fluid associated with the natural flow were calculated by grasping the temperature of geologic layers/reservoir pressure in the survey area and the temperature distribution for vertical depth. In the survey of boreholes in the Akinomiya area: N9-AY-3, N10-AY-6, N10-AY-7, N10-AY-8, temperature/pressure logging was conducted in the stationary state at the time when a lot of time passed after drilling, water-filling test and jetting test having been finished. In the temperature/pressure logging, the continued measurement was made using PTS logging device to simultaneously measure temperature/pressure/impeller revolution number and lowering measuring device. As a result of the survey, it was assumed that there is a possibility of occurrence of the borehole fluid flow around the depth of 980-1290m and 1320-1540m of N9-AY-3 and around the depth of 880-1090m of N10-AY-8. The rising speed and permeability of fluid from each well indicated the same order at three wells. (NEDO)

Investigation of geothermal development and promotion for fiscal 1997. Fluid geochemical investigation (hot-spring gas) report (No. B-5 Musadake area); 1997 nendo chinetsu kaihatus sokushin chosa. Ryutai chikagaku chosa (onsen gas) hokokusho (No.B-5 Musadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This investigation elucidated the possible existence of geothermal reservoir layer in the subject area by studying and analyzing the hot-spring gasses of Musadake. The Musadake area is the one extending over Shibetu-cho and Nakashibetu-cho, Shibetu district, Hokkaido. The sampling of the hot-spring gasses was carried out at three natural gusher sites and one hot spring well site. The gasses in the Kawakita hot spring is most affected by volcanic gasses. The origin of the volcanic gasses is a magmatic gas of andesite nature the {sup 3}He/{sup 4}He ratio of which is 8X10{sup -6} or about. As a result of the analysis, the hot-spring water is Na-Cl type, high salt concentrated, and 200 degrees C in temperature; from the result of a gas geochemical thermometer, it is estimated to be not less than 250 degrees C. In the tectonic viewpoint, the depth hot water is derived from the meteorite water that flows in through a bent zone incident to the Musadake-Shitabanupuri mountain fault and from the fossil sea water that exists in the underground depth; the depth hot water is formed by conduction heat from a magma reservoir that formed Musadake and by volcanic ejecta. This depth hot water rises along Kawakita south, Urappu River fault, etc., mixing with the meteorite water and forming the shallow reservoir layer. (NEDO)

FY 1994 report on the survey of geothermal development promotion. Complementary survey on the fracture system, etc. (Wasabizawa area); 1994 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho futai shiryo. Wasabizawa chiiki danretsu kei tou hokan chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

For the contribution to elucidation of the geothermal structure in the Wasabizawa area, Akita Prefecture, survey by the paleomagnetic measurement and fracture system measurement was conducted of the borehole cores and specimens of outcrop granite obtained from boreholes of N6-WZ-3 and N6-WZ-4. In the survey, the following were carried out: measurement of the core fracture system of N6-WZ-3 (102-1,505m) and N6-WZ-4 (507-1,556m), paleomagnetic measurement of 9 outcrop granite specimens and 16 core specimens, and k/Ar age determination of 3 outcrop granite specimens. As a result of the paleomagnetic measurement of outcrop granite, the magnetization azimuth of the schistose granodiorite distributed in Kuwanosawa was regarded as almost NS. The measured magnetization azimuth of the core specimen obtained from the same rock mass was also made NS-based, and measurement of the fracture in the neighborhood was made. As a result, it was found out that the NNW system was dominant in dikes and that there was the NE system in most of the small geothermal channels. The fracture system of well tended to develop around the boundary between granite and metamorphic rock, and it was thought that this part could be a reservoir if temperature conditions are prepared. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (metal-based)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (kinzokukei)'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-31

The results of the first phase research and development project for developing the metal-based composite materials as the basic technologies of the next generation are evaluated. For development of highly functional materials, the efforts are directed to understanding the basic characteristics regarding wettability and reactivity of PAN-based carbon fibers and PCS-based silicon carbide fibers with metals, in which aluminum-based matrices are considered; preliminary tests for various composting methods; and development of wire preforms as the intermediate materials. Bright prospects have been obtained for improving problems involved in each technique. For development of molding/processing techniques, basic researches have been conducted for hot pressing/rolling, extrusion/withdrawal, powder molding and melt molding, using various reinforcing fibers. Bright prospects have been also obtained for combinations of adequate molding processes for individual materials. For development of design techniques, the basic data regarding mechanical characteristics of FRMs, both domestic and foreign, are collected, and analyzed by the trace tests with specimens, to set up the targets for FRM function improvements, viewed from the designs. (NEDO)

Research and development of basic technologies for the next generation industries, 'bio-elements'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihtsu 'bio soshi'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed in order to establish basic technologies to realize new information processing incorporating high-order functions of living organisms, and bio-elements equipped with high-order functions. In the field of developing technical means to measure directly the information processing function of living organisms, detailed analysis has become possible for the first time on spatial operation of nerve activities by using two-dimensional beam measurement operation on the nerve activities. In the field of aiming at modeling, a system to realize functions effective in terms of engineering was structured by incorporating into the model the functions specific to nervous systems of visual sense and motion. In the field of element technologies, a large progress was seen in the basic technology and evaluation technology such as design and fabrication of molecules added with different functions in the LB membrane. Membranes having simple but different functions such as light beam and scent detection were manufactured, whereas a possibility of having them manifest functions as elements was verified. Furthermore, possibilities were discovered in manufacturing functional membranes by using self-organizing capability as a result of using basic properties possessed by polymers, and in realizing functions simulating plasticity of nerves. These achievements would lead to a belief that the targets of the first term research and development have been achieved nearly completely. (NEDO)

Report on surveys in fiscal 2000 on the survey on foundation to establish industrial technology strategy. Survey on lifetime education for mechanical engineers; 2000 nendo sangyo gijutsu senryaku sakusei kiban chosa hokokusho. Kikai gijutsusha shogai kyoiku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to set up a system for full-scale lifetime education, a feasibility study has been performed on preparing new educational materials and performing seminars. The continuing education program developed by the Japan Society of Mechanical Engineers is intended to assist engineers studied under the new engineer system to accumulate actual work experience after having acquired the qualification, and motivate ability maintenance and self-enlightenment after having acquired the engineer qualification, mainly through the training meetings and lecture meetings held by the Japan Society of Mechanical Engineers. The education items in the major field course include dynamics of materials and machines, energy and flow, information and control, and design and production. The items in the general common course include presentation and communication, kinetics learned from actual cases, engineer ethics, product liability and product safety. The seminar was held for two days for engineers graduated from undergraduate departments and experienced in actual works for two years or longer as the object. The actual status survey related to the continuing education by corporations revealed that 83% of the corporations has implemented intra-corporation training, and encouraged positive participation to outside seminars. (NEDO)

Research and development of basic technologies for the next generation industries, 'three-dimensional circuit elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'sanjigen kairo soshi'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-04-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to three-dimensional circuit elements that integrate functions at ultra-high density. For the basic technology of lamination, the SOI technology suitable for the three-dimensional circuit elements was developed, and it has become possible to manufacture high-quality multi-layered crystalline structure by means of annealing that uses laser and electron beam. In addition, a lateral epitaxial technology for solid phase was developed, and the base to be applied to the three-dimensional circuit elements was established. Furthermore, the technology to put thin film circuits together would be useful for high-density integration in the future. The three-dimensional circuit makes parallel processing in each segment possible, whereas a possibility was shown that the processing can be performed at much higher speed than before. Actually a prototype three-dimensional circuit equipped with functions for parallel processing and judgment processing was fabricated. The image pre-processing which has been impossible on the real time basis in the conventional two-dimensional integrated circuit was realized in a speed as fast as milli-second order. These achievements lead to a belief that the targets for the present research and development have been achieved. (NEDO)

Report on final evaluation of industrial science and technology research and development system. Comprehensive basic technologies for development of ocean resources. Manganese nodule exploitation system; Kaiyo shigen sogo kiban gijutsu (mangan dankai saiko system). Saishu hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

Described herein are the final evaluation results of the basic research and development of the system for exploiting manganese nodules as one of ocean resources. A 9-year project was started in the FY 1981 to establish the techniques to efficiently, economically exploit Mn nodules on a commercial basis, which are occurring on deep sea bottoms (4,000 to 6,000 m deep), in order to stably supply non-ferrous metallic resources, e.g., Ni, Cu, Co and Mn, which are essential for economic activities of Japan. Originally, the UN convention related to ocean laws raised development of unique exploitation techniques as the prerequisite condition for obtaining the right to develop Mn nodules. However, the situations around development of Mn nodules were changed since then, to devalue objects, significance and urgency of this project. The fourth amendment of the basic plans decided to suspend the comprehensive ocean tests in 1996, and to implement only the ocean/land tests in which part of the individual elementary techniques were combined. Therefore, the technological validation of the overall system could not be done sufficiently, and degree of achievement of the project is low, viewed from insufficient prospects of the commercial production. However, this project produced good results in individual elementary techniques, which are of significance for the resources policies. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (resin-based)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (jushikei)'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-30

The results of the first phase research and development project for developing the resin-based composite materials as the basic technologies of the next generation are evaluated. This project is aimed at development of the resin-based composite materials as light, high-strength and high-rigidity structural materials. Development of the basic techniques for these materials is of high significance, and highly rated. The first R and D phase efforts are directed to synthesis of new skeleton and terminal compounds, and their introduction into the matrices; application/combination of various fiber surface modification techniques; development of the basic techniques for intermediate materials for three-dimensional fabrics, triaxial fabrics and hybrid materials; improvement of the main techniques for a series of molding/processing steps; adoption of new methods; and development of design programs and elementary design techniques. The technical targets of improving functions of each item have been achieved, or bright prospects have been obtained therefor, each involving potentials of functional improvements by developing new functions. It is also considered that the parallel, competitive development and promotion of 7 routes in researches on the matrix resins have brought great effects. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (metal-based)'. Evaluation of the second phase research and development; Jisedai sdangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (kinzoukei)'. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-31

The results of the second phase research and development project for developing the metal-based composite materials as the basic technologies of the next generation are evaluated. For development of highly functional materials, the efforts are directed to modification of PAN-based high-strength carbon fibers for aluminum-based FRMs, and also to development of the methods for controlling interfacial reactions at high temperature by modification of the base materials for titanium-based FRMs. For development of carbon fiber-based intermediate materials, the techniques are developed for continuous production of wire preforms of aluminum. For development of molding/processing techniques, the press molding and powder HIP molding techniques are developed to give a planar product of the FRM of titanium alloy reinforced with evaporated filaments of silicon carbide, which shows an average tensile strength exceeding the target level. Also developed are the press and roll molding techniques for the wire preforms of aluminum reinforced with silicon carbide fibers, the planar product therefrom showing a tensile strength of at least 99% of the base material. It is concluded that the objectives of the second-phase project are almost achieved. (NEDO)

Achievement report for fiscal 1997 on development of practical application technology for photovoltaic power generation systems. Development of technologies to manufacture thin film solar cells (development of technologies to manufacture silicon crystal based high-quality materials and substrates / survey and research on analysis of practical application); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (zairyo kiban seizo gijutsu kaihatsu / silicon kesshokei kohinshitsu zairyo kiban no seizo gijutsu kaihatsu (jitsuyoka kaiseki ni kansuru chosa kenkyu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

As a plan to develop technologies to manufacture materials and substrates for thin film solar cells, it is intended to reduce defect density, enhance film forming speed, largely improve the photo-electric conversion efficiency and increase manufacturing productivity. These goals will be realized by establishing methods to control defect density, crystal particle diameters and crystallization rate in silicon crystal systems. A technology to form micro-crystal silicon-based thin films will be developed, that have superior photo-stability, and are capable of realizing low cost and mass production. Discussions will be given on a high-density plasma control technology, a fundamental property evaluation technology for micro crystal silicon thin films, and a device design simulation technology. A technology will be developed to form amorphous silicon layer on a stainless steel substrate by using the plasma CVD process. At the same time, discussions will be given on optical annealing and thermal annealing as reformation methods. Fiscal 1997 has surveyed component technologies to identify and analyze quickly and accurately the technical trends inside and outside the country, and to mass produce thin film solar cells. The Material and Substrate System Technology Subcommittee (silicon crystals) was held to deliberate the four-year development program and its progress. (NEDO)

FY 2000 report on the investigation of environmental effects in the geothermal development promotion survey. Tertiary. No.B-7 Kuwanosawa area; 2000 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho - No. B-7 Kuwanosawa chiiki (Dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

In the Kuwanosawa area, Yuzawa city, Akita prefecture, survey was conducted to grasp effects of drilling for structural boring in the geothermal survey on the peripheral environment. In the survey of animals, there were 5 orders/10 families/19 species of mammals and 10 orders/25 families/73 species of birds. Three kinds of precious animals were confirmed. There were 132 families/6,670 species in the flora. Three kinds of precious plants and three kinds of precious floras were confirmed. During the survey, drilling for structural boring was conducted. At three spas for survey, there were recognized some survey items of which there were great fluctuations. However, those are seasonal valuations or valuations related to the situation of the inside of hot springs. It is not recognized that the fluctuations were caused by the drilling work and pumping-up of geothermal water. The noise made during the well drilling was reduced around the well as theoretical values indicated. At a spot 200m away from the well, the noise was reduced from the environmental standard, and accordingly, it seems that there are few effects on the peripheral environment. The vibration was reduced around the well more than theoretical values indicated. That was below the control level at a spot 25m away from the well, and it seems that there are few effects on the peripheral environment. (NEDO)

NEDO Forum 2000. New energy and energy conservation introducing and proliferating project session (toward promotion of introducing new energies and energy conservation); Shin'ene shoene donyu fukyu jigyo session. Shin'ene shoene no donyu sokushin ni mukete

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

The following themes were presented at this session: (1) the history and roles of the NEDO's introduction and promotion projects, (2) expectation and prospects to introduction and promotion of new energy and energy conservation technologies, (3) energy innovation in houses and buildings actively using new energies and energy conservation means, (4) works on introducing new energies by using the private finance initiative (PFI), and (5) the last resort for energy conservation promoting measures in the industrial domain (high-performance industrial furnace technologies). In Item 3, design cases intended for sustainable buildings were introduced. In Item 4, the PFI is explained as a means to use as much fund and management know-how in private sectors as possible in improving the social capitals and providing high-quality public services. In Japan, the PFI promotion law was established in July 1999 (the law concerning promotion of improvements in public facilities by utilizing funds in private sectors). Introductions are given on the wide area wastes disposal project in Kimitsu Area, the PFI model project for power generation of everyday use at Kanamachi Water Purification Plant of the Tokyo Metropolitan Water Supply Bureau, and the Omuta RDF power generation project. In Item 5, descriptions are given on a new high-performance industrial furnace using the combustion mechanism of 'high-temperature air combustion' created from preheated air at temperatures higher than spontaneous combustion temperature. (NEDO)

FY 2000 report on the results of the data processing in the geothermal development promotion survey. Tertiary. No.B-7 Kuwanosawa area; 2000 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No. B-7 Kuwanosawa chiiki (Dai 3 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

The comprehensive analysis was conducted of various data obtained in the geothermal development promotion survey conducted in the Kuwanosawa area, Yuzawa city, Akita prefecture, from FY 1998 to FY 2000. The geology of the Kuwanosawa area consists of the Pretertiary system and Quarternary system, through which intrusive rocks are recognized. Basement rocks are composed of the Paleozoic-origin crystalline schist and the Cretaceous-period granites which intruded into the schist. In the Kuwanosawa area, there were recognized no clear geothermal signs such as the discharge of geothermal fluids like hot spring, fumarolic gas, etc., places of high temperature and new geothermal alteration zones. The geothermal water of borehole N11-KN-1 is a low temperature/low CL concentration geothermal water which was stored in basement rocks, which is supposed to be the one conductively heated in the process of the meteoric water penetrating deep-underground. The geothermal system heat source in the Kuwanosawa area and the periphery is regarded as the relic magma which spewed out the volcanic rocks of Mt. Takamatsu-dake in the Quaternary period. However, the geothermal fluid included no components originating in high temperature volcanic emissions, and therefore, it is considered that the geothermal fluid was formed by the meteoric water conductively heated by volcanic heat source. (NEDO)

FY 1994 report on the survey of geothermal development promotion. Investigative construction and analysis for structural boring (No. A-1 - Haneyama area); 1994 nendo chinetsu kaihatsu sokushin chosa. Kozo shitsui chosakoji oyobi kaiseki hokokusho (No. A-1 Haneyama chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

For the contribution to elucidation of the geothermal structure in the Haneyama area, Oita Prefecture, the paper carried out the drilling of structural boring exploration wells, N6-HN-1 (1,605m) and N6-HN-2 (1,402m), and the well exploration. In the well exploration, the following were conducted: measurement of earth temperature, temperature recovery test, electrical log, simple water injection test, core/cutting observation, core test, powder X-ray diffraction analysis, physical property test, measurement of homogenization temperature of fluid inclusion, etc. In the temperature log and temperature recovery test, the terminal temperature at a 1,600m depth of N6-HN-1 well and at a 1,400m depth of N6-HN-2 well was 139.6 degrees C and 26.2 degrees C, respectively. The homogenization temperature of fluid inclusion was relatively higher, +70 degrees C to +100 degrees C, than that in the results of the temperature log, but was on the side of lower temperature, -30 degrees C to -100 degrees C, in a comparison with the saturated boiling curve of the earth surface and ground water level. Namely, it was thought that around the N6-HN-1 well, there used to exist the high temperature fluid of 250 degrees C or higher at the peak period of geothermal activities, but there only existed the geothermal water of approximately 140 degrees C at the present time. (NEDO)

Fiscal 1995 survey of promotion of the geothermal development. Report on a usage feasibility test of a small scale geothermal binary cycle power generation system; 1995 nendo chinetsu kaihatsu sokushin chosa. Chusho chinetsu binary hatsuden system jissho shiken hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

In this survey, studies for popularization and practical utilization of small and medium size geothermal binary cycle power systems which assesses low and medium temperature geothermal resources were conducted, and studies for development of the system to be introduced for practical use and for promotion of the popularization were made. A study was carried out of preconditions and various conditions of a demonstrative test plant (100kW class, 500kW class) in view of the initial cost of the actual plant, and an analysis was made of the power generation cost. Acceptability of the demonstrative test plant (100kW class) was examined to analyze problems on the introduction. A thermodynamic analysis was made of the output of geothermal binary cycle power generation. Analysis/evaluation of the results of the 100kW demonstrative test plant were carried out in view of the operation results of the plant of the same kind, and checks/reviews were conducted of performance and reliability of the system, equipment simplification, etc. Inspection of the system was made in the stage of design/manufacture of the 500kW demonstrative test plant. Concerning the spread/expansion of the system, studied were multiple stage geothermal utilization and PR promotion method. 14 refs., 62 figs., 55 tabs.

Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system using animal waste; Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (chikusan haikibutsu riyo) jigyoka FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

To introduce the power generation system fueled by animal waste (excrements), one of the so-called industrial waste, its feasibility has been studied in Koyu and surrounding area located in Miyazaki Prefecture. This report includes the technical feasibility of available quantity of animal waste, chemical analysis of the waste, and basic design of the power generation system containing the furnace model and also its economical feasibility. The available quantity of animal waste in Koyu area is about 169,000 tons a year, which can generate 10.5 MW of electric power. That including the surrounding area is about 219,000 tons a year, which can generate 15.0 MW. The heating values of animal excrements in average and as received are 970 kcal/kg for pigs and 1,230 to 2,700 kcal/kg for broilers. In the case of combustion of mixed broiler and pig excrements, both of the stoker and fluidized-bed model furnaces become refractory furnace construction and provide with heat recovery boiler due to their high moisture content. In addition, the stoker furnace model requires an excrement dryer system as pre-treatment of fuel. For the fluidized-bed furnace of 15 MW grade power plant using the mixed fuel of 50% broiler excrements and 50% pig excrements, the power generation efficiency of 23% can be expected at generator end. The generating cost is around 10 yen/kWh. 27 refs., 61 tabs.

Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system using general RDF; Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (ippainado RDF riyo) jigyoka FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The refuse-derived fuel (RDF) has been holding public attention not only as the energy resource of stable high calorific value for local energy development, but also as the effective method for waste treatment. As one of the effective utilization methods for waste treatment, this investigation was conducted to industrialize and establish the RDF power generation system, in which power generation and ash treatment are integrated in Tochigi Prefecture which is located inland. The base supply type was adopted as a way of operation from the menu of the electricity wholesale project of Tokyo Electric Power Co. and its rate of operation is 80 percent a year. Then, the fluidized bed combustion method, a dry exhaust gas treatment method, and continuous electric melting furnaces were decided as the RDF power generation system. According to this system, it is possible to obtain 26 percent gross thermal efficiency by conventional generation facilities. It was estimated that the expenses reduction for 15 years will be 17.6 billion yen compared with the ordinary combustion system. Also, the following effects can be expected; the reduction of CO2 emission, improvement of energy efficiency, and the extension of life of landfills capacity. 36 figs., 51 tabs.

Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on first term final research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo (daiikki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The first term has performed research and development placing emphasis on that 'the basic study on membrane separation is to be performed systematically to elucidate governing factors in membrane separation'. With respect to water/ethanol separation by using the penetration gasifying method, it was indicated that excellent separation performance can be exhibited by using natural polymers having sugar chain skeleton as a raw material, and by controlling the membrane structure by means of membrane manufacturing methods. For enhancement of performance in water selective permeation type separation membrane, it was shown experimentally that it is important to select a membrane suitable for the object of separation and a separation method that uses the selected membrane. Regarding the water/ethanol separation, it was shown theoretically that the penetration gasifying method can save more energy than the conventional distillation method, where the development target was presented. It was recognized that impregnation type liquid membrane using crown ether can separate amino acid optical isomers. High separation performance was obtained in carbon monoxide/nitrogen separation by using fluid carrier that uses cuprous iodine/1-methyl imidazole. (NEDO)

Research and development of basic technologies for next generation industries, 'high-performance crystalline controlled alloy'. Evaluation on final research and development (final report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Koseino kessho seigyo gokin (saishu kenkyu kaihatsu hyoka 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

A proposal was given on a new processing process to use Ni-group super alloy, and elucidation was given on super plasticity phenomenon by using non-destructive tests. The Ni-group super heat-resistant alloy Mod. IN-100 subjected to different preforms by means of extrusion was given a super plasticity test at 1,050 degrees C to derive total elongation and 'm' value. As a result, it was disclosed that a material annealed for one hour at 1,070 degrees C after extrusion of 70% at 1,100 degrees C possesses the maximum 'm' value in the vicinity of 2.0 times 10{sup -2}s{sup -1}. The largest key to the new processing method is to improve the nature of the material, in which the plasticity manifestation velocity is accelerated by ten times to the order of 10{sup -2}s{sup -1} as described above. In addition, forging of IN-100 was made possible by using the ordinary forging equipment with the use of two-fold measures. The measures consist of maintaining temperature of IN-100 during casting by heating the die material to about 600 degrees C, rather than keeping it at a constant temperature, and then packing IN-100 in S35C steel material to accommodate the temperature decrease during casting inside the S35C pack. Thus, a processing method was made practical, eliminating need of the forging process to compress and solidify powder itself, that is the extrusion process. (NEDO)

Report for fiscal 2000 on surveys on foundation to establish industrial technology strategy. Surveys on foundation to assist activation of research and development; 2000 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kenkyu kaihatsu kasseika shien kiso chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In order to help discuss the measures to activate researches and developments in private corporations, surveys were made on barriers and factors related to industrial technology research and development by fields, and discussions were given on structuring research and development models. Factors impeding research and development processes relate to a case of each phase in the fundamental research, applied research, and product development, and a case of human resources, funds and information. A policy of structuring models was determined to make quantitative the effects of different aiding systems of the government for researches and developments in private corporations. Case analyses were conducted by using a pilot model. In the present research, a questionnaire survey was carried out to acquire such data as R and D time lag, and to identify the effects of the policies. Surveys were also performed on research and development programs in North America, by making interviews to concerned corporations. As a result of the surveys, such problems were extracted as research and development fund, freer flow of human resources, research and development systems, handling of results of researches performed by consortiums, accounting systems, and sale of the government owned patents. (NEDO)

Report on the surveys in fiscal 1999. Surveys on foundations for establishing industrial technology strategies (Strategies by fields - Bio technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (Bio technology bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In order to deal with strengthening of competitive power in the bio-technological field and social requirements thereon, it was intended to establish target setting, ways to achieve the objectives, and technological strategies including extraction of policy problems, by combining the wisdom possessed by industries, governmental organizations, and academic world. Section 1 describes the result of the surveys on establishing technological strategies by fields. America tackles importantly with matters related to life science. Japan is strong in fermentation technologies, bio-reactors, and enzyme engineering. Japan stands nearly equal, or is slightly inferior to America in clone livestocks and bio-sensors. Japan's competitiveness is very low in such advanced technology fields as gene therapies, gene combined agricultural products, bio-agricultural chemicals, gene exploration technologies, and gene diagnosis. Section 2 describes technological strategies in four fields. To explain, the improvement in foundations to raise efficiencies in research and development and industrialization processes, strategies to place importance on such industrial fields as realizing 'wishes of people for happiness of diversified nature', the improvement of the environment in which people and societies can enjoy benefits brought about by growth of the industries, and structuring of institutions to promote industrialization of bio-technologies for the nation as a whole. (NEDO)

Fiscal 1993 investigational report on the strengthening of the resource/energy industrial basis of CIS Central Asia (the Republic of Kazakhstan); 1993 nendo CIS Chuo Asia (Kazafusutan kyowakoku) no shigen energy sangyo kiban kyoka ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-05-01

The paper grasps the present situation of economy and industry in Kazakhstan and studies a policy for developing the industrial machine manufacturing industry of the country. Since the independence in 1992, the country is now at the great turning point in politics, economy, society and industry. The country is forced to convert from the industrial structure of one local area where much of its own discretion had not been given under the economy system of power centralization to the industrial structure which meets the international economic market system as an independent country. Making good use of agricultural and industrial property in the former U.S.S.R., the country needs to export energy resource like oil, natural gas and coal, and abundant ore resource like iron and non-ferrous metal, which were added with values. As the technical base for it, fostering and strengthening of the industrial machine manufacturing industry is important. At present, the situation is that because of the economic sluggishness, the country cannot manufacture domestically even basic mechanical parts and simply-manufactured parts which are required by the domestic energy industry, machine manufacturing industry, and other industries. The technical program to be proposed by Japan is planned to be worked out later based on the basic research made in fiscal 1993. 6 figs., 14 tabs.

Research and development of basic technologies for the next generation industries, 'recombinant DNA utilizing technology'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'kumikae DNA riyo gijutsu'. Kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research, development and evaluation were performed with an objective of establishing the basic technology related to the recombinant DNA utilizing technology to create new microorganisms for processes in the chemical industry. The major achievements of the present research and development include establishment of the P450 gene manifestation system attributed from microsomes and mitochondria, and the success of the world's first simultaneous manifestation of P450 and reduction enzyme. Furthermore, the fused enzyme combining P450 and the reduction enzyme genetically was successfully manufactured ahead of the other countries, opening the way to industrializing the recombinant enzymes for use in bio-processes in the chemical industry. In creating a high-efficiency secretion recombinant bacillus subtilis stock, a bacillus subtilis host whose protease activity has been noticeably decreased was created. As an achievement of the research on the 'basic recombinant DNA technology', high-efficiency manifestation vector of medium level thermophile was created, and its usefulness was demonstrated. In addition, a host and vector system for high level thermophile was developed for the first time in the world. These achievements have opened the way to industrial utilization of the thermophilic bacteria. (NEDO)

Research and development of basic technologies for next-generation industry. Ultimate evaluation report on research and development of highly efficient polymeric separation membrane material; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo saishu kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-05-01

For the enhancement of separation process efficiency and energy efficiency in the chemical industry, etc., basic technologies are developed involving high-performance separation membrane materials which are excellent in durability and usable in the field where separation by membranes has been impractical. The liquid mixtures subjected to separation are a neutral organic compound/water system, an acidic organic compound/water system, and a polar organic compound/water system; the gas mixtures subjected to separation are an oxygen/nitrogen system and a carbon monoxide/nitrogen system. After a 10-year/3-phase development endeavors, the initially intended goals are sufficiently achieved. Among those that have to be mentioned is the development of a nonaqueous separation membrane, a supported liquid membrane with amino acid optically active high performance separation capability, a high-precision evaluation unit for gas separation membrane characteristics, a selective permeation membrane with high-level oxygen and carbon monoxide carriers and reactivation technology, a high-performance ethanol separation membrane, a water/polar organic compound separation membrane, and a water/acetic acid separation membrane and stability providing technology. In particular, the water selective permeation membrane for a mixture of water and alcohol has already arrived at the stage of bench plant demonstration. (NEDO)

Research and development of basic technologies for next generation industries, 'high-performance crystalline controlled alloys'. Evaluation on final research and development (first report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Koseino kessho seigyo gokin (saishu kenkyu kaihatsu hyoka 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

The present research work has been performing research and development of the following alloys: (1) 'single crystalline alloy' , the entire alloy being composed of one crystal eliminating crystalline boundaries as an ultra heat resistant alloy with emphasis placed on improvement in particularly the creep properties, and 'particle dispersion strengthened alloy', in which ultrafine particles of oxides are dispersed uniformly; and (2) 'ultra heat resistant and tough alloy' targeted at high-temperature toughness by using Ni-group allowing ultra plasticity forging processing by micronizing crystal particles, as an ultra plastic and highly tough alloy having better processibility than conventional alloys, and 'light-weight highly tough alloy' aimed at achieving light weight and high toughness by using Ti-group. Achievements derived from the present research and development may be summarized as follows: in alloy development, alloys having performance of the world's highest level or equivalent have been developed; a manufacturing technology to make products with complex shapes has been established by using the alloy material manufacturing technology and the alloy materials developed therefrom, where prototype components of such shapes as turbine blades and turbine disks for jet engines were fabricated successfully; and the big fruit obtained was that a large number of technological experiences were acquired from this research and development. (NEDO)

Fiscal 2000 report on result of R and D of nonmetallic material recycling promotion technology (demonstration test and research, total system technology); 2000 nendo hitetsu kinzokukei sozai recycle sokushin gijutsu kenkyu kaihatsu seika hokokusho. Jissho shiken kenkyu, total system gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

R and D was conducted on advanced recycling technology for aluminum and base metal/rare metal based materials, with fiscal 2000 results compiled. In the research of aluminum recycling technology, on a continuous fractional crystallization process and a purification by zinc removal process, the existing facilities for each demonstrated that they could simulate an aluminum scrap melting process capacity of 1,000 t/month, with a series of initial conditions determined. In the research of total system technology, combined test facilities were completed in which a purification process and a melt cleaning process were integrated. In the research of the recycling technology for base metal/rare metal based materials, a test was carried out by demonstrative facilities, with the aim of establishing copper regeneration technology in which high grade copper is produced using metal/resin based scraps such as shredder dust of automobiles as the materials. In structuring the total system technology, a preliminary survey and environmental load measures were carried out toward the practicability of a comprehensive copper metal collection recycling system. (NEDO)

Report on survey on geothermal development promotion in fiscal 1999. Report on survey on environmental effects - noise and vibration (No. B-5, Busadake Area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa (soon shindo) hokokusho (No.B-5 Busadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Identification of noise and vibration levels and evaluation on environmental effects were performed in association with the excavation in the geothermal investigation well drilling point (well N11-MD-3) and the vicinity thereof in the Busadake area in Hokkaido. In the survey, noise and vibration were measured before and during the well excavation at the well drilling point and nearby four points (boundary of the drilling premises, 500-m point, Kawakita Spa and the entrance to the mountain stream of petroleum). In addition, a distance decay survey was carried out at five points in one direction from the well drilling point. The result of the noise measurement showed the value of about 30 to 50 dB before the well excavation at the drilling point and its vicinity, and about 40 to 60 dB during the excavation. The vibration was about 40 dB at the boundary of the premises during the excavation, whereas the places other than them showed the lower limit of measurement. In the distance decay of the noise, 75 dB at the 10-m point decayed to 50 dB or lower in the 200-m point, while the vibration level of 75 dB decayed to 30 dB or lower in the 100-m point. These facts lead to a conception that the noise and vibration in association with the well drilling would not give great influence on the neighboring environment. (NEDO)

Investigations in fiscal 1986 on promotion of geothermal development. Part 2. Report on precision structural test well drilling and investigation works in Otaki area; 1986 nendo chinetsu kaihatsu sokushin chosa hokokusho. 2. Otaki chiiki seimitsu kozo shisui oyobi chosa koji

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-09-01

With an objective of promotion of geothermal development in the Otaki area in Nagano Prefecture, precision structural test well drilling and investigation works have been carried out, and the result thereof reported. The investigated area is an inclined land with an area of 70 km{sup 2} at altitudes of 1,000 to 2,000 m in the southern foot of the Mitake volcano having Otaki River as the southern border. The investigation has performed during the period from March 2 to September 30, 1987 the drilling of the N61-OT-5 test well hole (depth of 502.0 m), temperature logging, temperature restoration test, water injection test, and core test. The result of the investigation may be summarized as follows: existence of the stratigraphic succession as predicted by ground surface investigation, and existence of the Mesozoic and Palaeozoic strata of the Mino belt were verified; the Mesozoic and Palaeozoic strata of the Mino belt being the base bed have only small cracks, and very little alteration can be identified; X-ray diffraction of powder from test drilled cores recognized very little minerals altered by hot water; and the temperature logging and temperature restoration test identified no temperature indication that clearly indicates existence of heat sources. As a conclusion, there is no alteration due to hot water down to 500 m below the surface in the vicinity of the investigation well, and the possibility of a geothermal reservoir to exist is extremely low. (NEDO)

FY 1992 report on the survey of geothermal development promotion. Supplementary survey on data processing (No.38 - West area of Mt. Aso); 1991 nendo chinetsu kaihatsu sokushin chosa. Data shori ni kakawaru hosoku chosa hokokusho (No.38 Asosan seibu chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-01

As a part of the survey of geothermal development promotion in FY 1992, chemical/isotopic analysis of fumarolic gas in the Yoshioka district was made to elucidate the underground geothermal structure in the west area of Mt. Aso in Kumamoto Prefecture. Items for analysis of fumarolic gas were 16 items including the temperature, concentration of non-condensable gas, CO2, H2O, CH{sub 4}, {delta}D(CH{sub 4}) and {delta}{sup 13}C(CO2). Items for analysis of condensed water were 9 items including pH, Na, NH{sub 4}, {delta}D(H2O) and {delta}{sup 18}O. As a result of the analysis, the main component of non-condensable gas of fumarolic gas was CO2, and the composition was similar to that of the fumarolic gas in the Yunoya/Tarutama district in the periphery. It was presumed that the origin and formation mechanism of fumarolic gas were also similar to those in the Yunoya/Tarutama district. It was presumed that the deep geothermal reservoir which is the source of vapor/gas generation was composed of the neutral or alkalescent geothermal water, and a possibility that the reservoir is connected with the deep geothermal reservoir in the Yunoya district was presumed from a viewpoint of geographical location. (NEDO)

FY 1992 report on the survey of geothermal development promotion. Electromagnetic exploration (TDEM method) (No. A-1 - Haneyama area); 1992 nendo chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. Denji tansa (TDEM ho) hokokusho (No. A-1 Haneyama chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

For the purpose of elucidating a possibility of existence of geothermal reservoirs in the Haneyama area, Oita Prefecture, Electromagnetic survey by the TDEM method was conducted. The survey was made for the area of 80km{sup 2} at 105 measuring points in the south of the Haneyama area, and the resistivity structure reaching the depth of 4,000m from the earth surface was made clear. The resistivity structure in this area is composed of 4 layers: upper medium resistivity layer, central medium resistivity layer, central low resistivity layer and lower high resistivity layer. The resistivity structure discontinuous line ranges between the uplift zone of basement and the sedimentation zone, and the greater part of the alteration zone is distributed and arranged concomitant with the position and direction of the line. As the region with high potential of geothermal existence, cited were the low resistivity zone distributed in the west of the resistivity structure discontinuous line that continues from Mt. Fukuman to the south, the low resistivity zone distributed in the north of the resistivity structure discontinuous line from Noya to the west, and the low resistivity zone distributed in the north of Hosenji and lying between resistivity structure discontinuous lines. (NEDO)

Research report for fiscal 1998 including researches into global environmental problems. Business report on the promotion of interaction of scientists over environmental problems in the Asia-Pacific region; 1998 nendo Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Global environmental problems are growing quite serious in developing countries, yet they are requested to properly deal with them without making light of sustainable development, for which international cooperation and diffusion of technologies for the development of environmental technologies are mandatory. Japan, utilizing what it learned from pollution within in the past and making the best use of its technologies and knowledge for environmental improvement in developing countries in Asia, has been hosting since fiscal 1997 a function of Environmental Technology Research Network in the Asia-Pacific Region function. In fiscal 1998, a fifth international symposium was convened at Science City Center at the foot of Mt. Suzuka on November 26 and 27. The central theme was the development of environmental technologies and international cooperation for developing nations, and the event attracted 180 participants from inside Japan and abroad. A number of concrete themes came out of working groups on water quality, air quality, and energy/waste, which concerned the drafting of propositions for international collaborative researches. As for researches abroad, four typical Malaysian institutes were visited. (NEDO)

Promotion of the formation of environmentally friendly energy community (FY 2000). Demonstration of the gas turbine repowering waste combined power generation technology; 2000 nendo kankyo chowagata energy community keisei sokushin seika hokokusho. Gas turbine repowering haikibutsu fukugo hatsuden gijutsu jissho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Demonstrative operation was conducted of the super waste power generation system in which the low temperature steam generated in waste incinerator is raised in temperature using the combustion exhaust gas emitted after the power generation using another gas turbine for conducting the steam turbine power generation with high efficiency. The FY 2000 results were summed up. In the demonstrative operation, operation and data acquisition/analysis were conducted following the previous fiscal year by 25MW class gas turbine repowering waste combined power generation facilities (Takahama power plant). Further, four years after the start of operation, the secular variation was studied by disassembly/inspection of equipment. As a result of the operation, the thermal efficiency was approximately 35%, much higher than the existing waste power generation. It was verified that the power system was maintained by the same maintenance as that of the ordinary power system. Moreover, the important point of this system is that no special corrosion resistant materials are used and that the high-efficiency waste power generation was demonstrated by combining the existing equipment. It can be said that the super waste power system has high qualities for forming energy community as a regionally dispersed stabilized power source. (NEDO)

Fiscal 1999 survey for promotion of geothermal energy development. Survey report of environmental impact survey - Hot spring fluctuation (No. B-5, Musadake district); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (onsen hendo) (No.B-5 Musadake chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

Research boreholes N11-MD-3 and -4 were drilled in Shibetsu-cho, Shibetsu-gun, Hokkaido, in the period July 1999 through December 1999, and thermal water was examined at the sites in July and November 1999. For the purpose of detecting the impact of the said work on the environment, local hot springs were examined for their status before, during, and after the drilling period. Measurements were conducted in the period August 5, 1998, through December 31, 2000. It was found that no fluctuation in water temperature or yield attributable to the drilling was detected. Hot springs were examined for nine items including water temperature and pH level at four spots which were Kaiyo-dai, River Tenyu, and Otoko-yu and Onna-yu of Kawakita Hot Spring, when 23-31 measurements were performed from each of the four. (NEDO)

Research and development of basic technologies for next-generation industries. Evaluation of 2nd phase research and development of technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu saibo tairyo baiyo gijutsu. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-30

The project aims to establish basic technologies for the mass culture of cells which will enable a large, stable supply of fine chemical products whose industrial production the conventional technique of synthesis has failed to realize. In the 1st phase, cell stains were selected, a serumless medium was developed, basic culturing conditions were established, and substances production rates were improved, and the 2nd phase stands succeeding these 1st phase achievements. Toward the ultimate goal of establishing basic technologies for serumless high-density cultures for industrial use and technologies for isolating and refining useful substances, a small-scale optimum culture technique and a serumless culture technique are developed. Serumless cultures are developed for strains of man's lymphoid cells, cells deriving from bone marrow, epithelial cells, and hybridomas of man and mouse, all these sampled during the 1st phase endeavors. Success is attained in growing each cell strain on a scale of 1-10L to increase to 10{sup 7} cells/ml or more in population density. It is found that each cell strain produces useful substances, such as man's monoclonal antibodies and elements involved in the multiplication or differentiation of new cells. (NEDO)

Research and development of basic technologies for next-generation industries. Evaluation of 2nd phase research and development of technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu saibo tairyo baiyo gijutsu. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-30

The project aims to establish basic technologies for the mass culture of cells which will enable a large, stable supply of fine chemical products whose industrial production the conventional technique of synthesis has failed to realize. In the 1st phase, cell stains were selected, a serumless medium was developed, basic culturing conditions were established, and substances production rates were improved, and the 2nd phase stands succeeding these 1st phase achievements. Toward the ultimate goal of establishing basic technologies for serumless high-density cultures for industrial use and technologies for isolating and refining useful substances, a small-scale optimum culture technique and a serumless culture technique are developed. Serumless cultures are developed for strains of man's lymphoid cells, cells deriving from bone marrow, epithelial cells, and hybridomas of man and mouse, all these sampled during the 1st phase endeavors. Success is attained in growing each cell strain on a scale of 1-10L to increase to 10{sup 7} cells/ml or more in population density. It is found that each cell strain produces useful substances, such as man's monoclonal antibodies and elements involved in the multiplication or differentiation of new cells. (NEDO)

Research and development of basic technologies for the next generation industries, 'light-reactive materials'. Evaluation on the second term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'hikari hanno zairyo'. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-03-01

Research and evaluation was performed with an objective of establishing the basic technology related to light-reactive materials that control the structures and status of aggregation of molecules by using actions of light, and can be used for ultra-high density recording, high resolution indication and light switches. In elucidating the basic characteristics of photochromic materials, a non-destructively readable recording system was proposed and demonstrated, highly durable and high-functional photochromic compounds were developed, and a number of material design guidelines were accumulated to realize characteristics required in light-beam recording. With regard to development of the photochromic materials, realization of photochromic thin films that can record wavelengths in multiplex manner has become more realistic. For elucidating basic characteristics of PHB materials, a method for evaluation from a number of directions including the time method for photon echo was established in addition to the conventional frequency recording characteristics. Regarding the elucidation of the PHB phenomenon, demonstration was carried out on intermediate zone structure control in diversified material systems including living organism substances, where a large number of findings were accumulated. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (quality evaluation techniques)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (hinshitsu hyoka gijutsu)'. Zenki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The results of the first phase research and development project for developing composite materials as the basic technologies of the next generation are evaluated, and the directions of the R and D evaluation for the second phase are set up. The efforts in the first-phase R and D project are aimed at development of methods for measuring carbon fiber surface structure elements; confirmation of the relationship between adhesive shear strength and active surface area; development of methods for determining fracture toughness by standard specimens; estimation of allowable void fraction for inter-layer shear strength; defect detection and quality evaluation by electromagnetic, ultrasonic, laser holography and AE methods; development of methods for detecting resin setting reactions during the molding processes; and understanding deteriorated mechanical characteristics of the resin-based composites by environmental factors, among others. The objectives of the first-phase project have been almost achieved. It is decided that the second-phase R and D project are directed to investigations on the relationship between surface properties of the fibers in the composites and fiber/matrix adhesion; researches on mechanical characteristics involved in fracture of the structural elements; evaluation of mechanical properties of the metal-based composites and investigations on detecting their defects; elucidation of the effects of environmental factors on their strength; and development of the techniques for integrating detection of molding-induced cracking and that of setting reactivity, among others. (NEDO)

Achievement report on research and development of the industrial basic technologies of the next generation in fiscal 1981. Research and development of composite materials; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Fukugo zairyo no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Described herein are the results of the FY 1981 research and development for composite materials, established by the R and D system for the basic technologies of the next generation. The R and D project for resin-based composite materials involves basic researches on the matrix resins, and surface modification of the reinforcing fibers. The investigations and basic tests are conducted for monolithic molding, other types of molding, and cutting and boring by, e.g., laser beams and water jet. The other related efforts include researches on analysis theories for optimization of strength and rigidity of the composite structures, and development of the optimization programs. For the R and D project for the metal-based composite materials, the efforts are directed to understanding wettability and reactivity of the reinforcing fibers with metals, and development of the techniques for producing various types of preforms and compositing methods. The basic researches are conducted for hot pressing/rolling molding, extrusion/withdrawal, powder molding and melt molding of the composite materials with aluminum alloys as the matrices. The other R and D items include investigations on methods for evaluating qualities for the steps form the stock preparation to production of the final products. (NEDO)

Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on first term final research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo (daiikki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The first term has performed research and development placing emphasis on that 'the basic study on membrane separation is to be performed systematically to elucidate governing factors in membrane separation'. With respect to water/ethanol separation by using the penetration gasifying method, it was indicated that excellent separation performance can be exhibited by using natural polymers having sugar chain skeleton as a raw material, and by controlling the membrane structure by means of membrane manufacturing methods. For enhancement of performance in water selective permeation type separation membrane, it was shown experimentally that it is important to select a membrane suitable for the object of separation and a separation method that uses the selected membrane. Regarding the water/ethanol separation, it was shown theoretically that the penetration gasifying method can save more energy than the conventional distillation method, where the development target was presented. It was recognized that impregnation type liquid membrane using crown ether can separate amino acid optical isomers. High separation performance was obtained in carbon monoxide/nitrogen separation by using fluid carrier that uses cuprous iodine/1-methyl imidazole. (NEDO)

Fiscal 2000 project for development of international standards for supporting novel industries. Standardization of production process system (Development of basic STEP standards); 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo. Seisan process system no hyojunka (STEP kiban kikaku no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts are under way to develop STEP (standard for the exchange of product model data) of ISO-10303 into specifications for expressing the total life cycle of products from designing, manufacturing, to disposition. Japan's study centers about product model expression involving 'thing-making for machine products.' In the study, the functions of the mechanical production process system ranging from designing to manufacturing were analyzed, and the results were built into an integrated application activity model (I-AAM). The I-AAM was analyzed, and an assembly model capable of expressing detailed relations between parts, such as mechanical linking and binding, was developed, and the model was accepted as a new work item at TC184/SC4 in February 2001. In relation to the parametric assembly of Part 108, moreover, the fruit of this research and development effort was adopted. In relation to manufacturing, problems were extracted involving important production designs between the processes of designing and manufacturing. They were raised at SC4, and a data model was proposed. (NEDO)

In situ observation of surface reactions with synchrotron radiation induced semiconductor processes by infrared reflection absorption spectroscopy using buried metal layer substrates; Umekomi kinzokuso kiban wo mochiita sekigai hansha kyushu supekutoruho ni yoru hoshako reiki handotai process hanno no sonoba kansatsu

Energy Technology Data Exchange (ETDEWEB)

Yoshigoe, A.; Hirano, S. [The Graduate University for Advanced Studies, Yokohama (Japan); Mase, K.; Urisu, T. [Institute for Molecular Science, Aichi (Japan)

1996-11-20

It is known that infrared reflection absorption spectroscopy (IRAS) on semiconductor or insulator surfaces becomes practicable by using buried metal layer (BML) substrates, in which the metal thin film is buried order semiconductor or insulator films. In this work, IRAS has been measured for Langmuir-Blodgett films deposited on the BML substrate with SiO2/Al/Si(100) structure and the observed spectrum intensity has been quantitatively compared with the calculation assuming the ideal multilayer structure for the BML substrate. The BML-IRAS using CoSi2 has been adopted to the detection of SiHn on the Si (100) substrate during synchrotron radiation (SR) stimulated Si2H6 gas source molecular beam epitaxy. It has been found that SiH2 and SiH3 on the Si (100) surface are easily decomposed by SR, but SiH can`t be decomposed. From these experiments, it has been concluded that the BML-IRAS is an useful in situ observation technique for the photo-stimulated surface reactions. 26 refs., 9 figs.

Report on surveys in fiscal 2000 on the surveys and researches on fundamental technology of polymeric materials in relation to materials nano-technology program; 2000 nendo zairyo nano technology program ni kansuru kobunshi zairyo kiban gijutsu ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-11-01

On the 'polymeric' technology field being the constitution elementary technology of the material neon-technology program, surveys and researches have been performed through holding workshops on the directionality of technological development to be proceeded in a medium term in the future, and the assignments to be worked on with emphasis. The 'Fundamental technology of polymeric materials workshop' was held together with the 49th polymer discussion meeting, in which 300 persons have attended showing high interest of researchers. With regard to the prospect and possibility of the polymeric technology, statements were given on the ways the polymeric technology development should be in the future, and expectations toward the polymeric technology. In the development assignments for the polymeric technology, discussions were given on the current status and problems in the primary structure control technology, tertiary structure control technology, and surface and interface structure control technology. Discussions were also given on the current status and problems in textiles as the high-order structure control technology, the current status and problems in the material forming technology, and the systematization of the polymeric technology and the knowledge thereof. The core of the polymeric technology is the nano-technology itself, whereas the expectations toward the 'Fundamental Polymeric Technology Research Center' were indicated. (NEDO)

Report on the FY 1999 medical/engineering joint research project. Developmental item: 'Fundamental research for minimally invasive/super selective localized diagnosis and treatment system'; Teishinshu kokando sentakuteki kyokusho shindan chiryo ichigenka system no kiban kenkyu 1999 nendo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

The fundamental research was started of a total system for the minimally invasive diagnosis/treatment to cope with the diseases of brain/heart blood vessel system and malignant tumor which are increasing in the aging society, and the development of application of the system was started. The results of the FY 1999 study were reported. In the R and D of the technology for an up-grade/multi-functional catheter, the following were carried out in the design of a micro-diameter catheter for carrying out the total diagnosis/treatment: study of infrared radiation measuring and fluorometric measuring methods, study of the specifications required for the catheter presumed of the gene introduction method by water jet system, study of 2 and 3 {mu}m synchronous oscillation fiber laser which is suitable for optical micro-operation, etc. The information/knowledge in design were obtained. Further, in the basic research on high-sensitivity texture property diagnosis using optical spectrometry, experimental studies were started on the early diagnosis technology by infrared spectroscopy and lymphonodus metastasis diagnosis technology. A study was also started of gene therapy technology by diseases which can be diagnosed/cured using catheter. (NEDO)

'Research and development of research information infrastructure'. Achievement report on development of parallel processing software technology for discrete value solving methods; Kenkyu joho kiban kenkyu kaihatsu seika hokokusho. Risanka suchi kaiho no tame no heiretsu shori software gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

Research and development has been performed on a general purpose parallel processing software that can be utilized for value solving methods, such as the finite element method, finite volume method and finite difference method. The achievements of the research and development may be summarized as follows: this parallel platform is parallelized in the concept of the domain division method for the elements (calculation cells), and is applicable to any of the finite element method, finite volume method and finite difference method; a researcher who has developed a program can easily perform the parallelization work to have the parallelizing performance displayed; the platform can be utilized in agreement with several parallel levels that are required by the user; with regard to the parallelization efficiency in large-size problems, it has become possible to execute at an efficiency of higher than 70% for the solver parts by using 32 processors of SR8000 at the computation center of the Agency of Industrial Science and Technology; the rigidity matrix preparing part shows an efficiency close to 100%W; and the developed parallel platform is under continued evaluation at the Machine Technology Research Institute and the Material Engineering Research Institute. (NEDO)

Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on second term final research and development (first report); Jisesdai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu bunshi bunrimaku zairyo (dainiki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

This study is intended to establish a basic technology for innovative high-efficiency separation membrane materials that can be used in areas in which application of membrane separation has been impossible. The water/ethanol separation membrane (for water selective permeation) and water/acetic acid separation membrane (for water selective permeation) achieved separation coefficient and permeation velocity of the world's highest level. The water/ethanol separation membrane (for ethanol selective permeation), although its separation coefficient is lower than the world's highest performance, has high permeation velocity, providing the performance of the worldwide level as seen from the comprehensive viewpoint. The carbon monoxide/nitrogen separation membrane achieved separation coefficient and permeation velocity of the world's highest level. The oxygen/nitrogen separation membrane requires further enhancement in the permeation velocity and stability. Establishment has been performed on separation technologies for membrane separation of non-water soluble aqueous solutions, optical division by using chiral crown ether, high-performance liquid separation by means of plasma surface treatment, and particle separation. Basic analysis has been advanced also on evaluation technologies for gaseous body separation membrane and liquid separation membrane, of which future progress is expected. (NEDO)

Research and development of basic technologies for next generation industries, 'high-performance crystalline controlled alloys'. Evaluation on final research and development (first report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Koseino kessho seigyo gokin (saishu kenkyu kaihatsu hyoka 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

The present research work has been performing research and development of the following alloys: (1) 'single crystalline alloy' , the entire alloy being composed of one crystal eliminating crystalline boundaries as an ultra heat resistant alloy with emphasis placed on improvement in particularly the creep properties, and 'particle dispersion strengthened alloy', in which ultrafine particles of oxides are dispersed uniformly; and (2) 'ultra heat resistant and tough alloy' targeted at high-temperature toughness by using Ni-group allowing ultra plasticity forging processing by micronizing crystal particles, as an ultra plastic and highly tough alloy having better processibility than conventional alloys, and 'light-weight highly tough alloy' aimed at achieving light weight and high toughness by using Ti-group. Achievements derived from the present research and development may be summarized as follows: in alloy development, alloys having performance of the world's highest level or equivalent have been developed; a manufacturing technology to make products with complex shapes has been established by using the alloy material manufacturing technology and the alloy materials developed therefrom, where prototype components of such shapes as turbine blades and turbine disks for jet engines were fabricated successfully; and the big fruit obtained was that a large number of technological experiences were acquired from this research and development. (NEDO)

Report on surveys in fiscal 2000 on the surveys and researches on fundamental technology of polymeric materials in relation to materials nano-technology program; 2000 nendo zairyo nano technology program ni kansuru kobunshi zairyo kiban gijutsu ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-11-01

On the 'polymeric' technology field being the constitution elementary technology of the material neon-technology program, surveys and researches have been performed through holding workshops on the directionality of technological development to be proceeded in a medium term in the future, and the assignments to be worked on with emphasis. The 'Fundamental technology of polymeric materials workshop' was held together with the 49th polymer discussion meeting, in which 300 persons have attended showing high interest of researchers. With regard to the prospect and possibility of the polymeric technology, statements were given on the ways the polymeric technology development should be in the future, and expectations toward the polymeric technology. In the development assignments for the polymeric technology, discussions were given on the current status and problems in the primary structure control technology, tertiary structure control technology, and surface and interface structure control technology. Discussions were also given on the current status and problems in textiles as the high-order structure control technology, the current status and problems in the material forming technology, and the systematization of the polymeric technology and the knowledge thereof. The core of the polymeric technology is the nano-technology itself, whereas the expectations toward the 'Fundamental Polymeric Technology Research Center' were indicated. (NEDO)

Fiscal 2000 research report on the study on new device material, measurement, and analysis technologies for data communication base improvement program; 2000 nendo joho tsushin kiban kodoka program ni kakawaru shin device zairyo keisoku kaiseki gijutsu ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

Concerning the 'new device material, measurement, and analysis technologies' which is one of the important technological constituent of the data communication base improvement program, investigations were conducted as to the future direction of middle-term technology development efforts and the important tasks to discharge. Workshops were organized to deal with the subjects named below, and the results of discussion were made into a report. It is proposed in the report that common recognition be fomented about future feasibility of the development of the new device material, measurement, and analysis technologies; that presentations be made as to how the development of the new device material, measurement, and analysis technologies should be carried out in what direction; that the tasks to discharge for the new device material, measurement, and analysis technologies be clearly defined; and the like. It is also decided that findings offered by experienced people of the industrial, academic, and government circles be fully utilized at deliberation conferences and that studies be conducted for the implementation in the future of the data communication base improvement program. Materials on the 1st-4th semiconductor program study meetings and EIAJ (Electronic Industries Association of Japan)/NEDO (New Energy and Industrial Technology Development Organization) workshops are collected in the report. (NEDO)

Research and development of basic technologies for next generation industries, 'high-performance crystalline controlled alloy'. Evaluation on final research and development (final report); Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Koseino kessho seigyo gokin (saishu kenkyu kaihatsu hyoka 2)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

A proposal was given on a new processing process to use Ni-group super alloy, and elucidation was given on super plasticity phenomenon by using non-destructive tests. The Ni-group super heat-resistant alloy Mod. IN-100 subjected to different preforms by means of extrusion was given a super plasticity test at 1,050 degrees C to derive total elongation and 'm' value. As a result, it was disclosed that a material annealed for one hour at 1,070 degrees C after extrusion of 70% at 1,100 degrees C possesses the maximum 'm' value in the vicinity of 2.0 times 10{sup -2}s{sup -1}. The largest key to the new processing method is to improve the nature of the material, in which the plasticity manifestation velocity is accelerated by ten times to the order of 10{sup -2}s{sup -1} as described above. In addition, forging of IN-100 was made possible by using the ordinary forging equipment with the use of two-fold measures. The measures consist of maintaining temperature of IN-100 during casting by heating the die material to about 600 degrees C, rather than keeping it at a constant temperature, and then packing IN-100 in S35C steel material to accommodate the temperature decrease during casting inside the S35C pack. Thus, a processing method was made practical, eliminating need of the forging process to compress and solidify powder itself, that is the extrusion process. (NEDO)

Research and development of the industrial basic technologies of the next generation, 'composite materials (highly functional, crystal-controlled alloys)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'koseino kessho seigyo gokin'. Zenki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The results of the first phase research and development project for developing highly functional, crystal-controlled alloys as the basic technologies of the next generation are evaluated. The R and D themes are selected to develop alloys superhighly resistant to heat, heat-resistant/high-rigidity and light/high-rigidity by controlling their crystals. Development of the basic techniques for these materials is of high significance, and highly rated. The efforts in the first-phase R and D project are aimed at designs of a total of 12 types of single-crystal alloys by the computer-aided alloy designing techniques, production of these alloys on a trial basis, and evaluation of their characteristics, for the alloys superhighly resistant to heat. Two of them are confirmed to be superior to the others, and selected as the alloys to be developed. This project has also established the single-crystal casting techniques, which allow crystal orientation almost completely. Various types of heat-resistant/high-rigidity and light/high-rigidity alloys are designed, produced on a trial basis, and evaluated for their characteristics. As a result, one alloy type is selected for each category. The other techniques developed by this project include those for adjusting powders for light/high-rigidity alloys whose average grain sizes are controlled and impurity contents are reduced. Bright prospects have been obtained for the techniques for superplastically forging the disk shapes. These efforts have almost achieved the development objectives of the first-phase R and D project. (NEDO)

Report on the surveys in fiscal 1999. Surveys on foundations for establishing industrial technology strategies (Strategies by fields - Bio technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (Bio technology bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In order to deal with strengthening of competitive power in the bio-technological field and social requirements thereon, it was intended to establish target setting, ways to achieve the objectives, and technological strategies including extraction of policy problems, by combining the wisdom possessed by industries, governmental organizations, and academic world. Section 1 describes the result of the surveys on establishing technological strategies by fields. America tackles importantly with matters related to life science. Japan is strong in fermentation technologies, bio-reactors, and enzyme engineering. Japan stands nearly equal, or is slightly inferior to America in clone livestocks and bio-sensors. Japan's competitiveness is very low in such advanced technology fields as gene therapies, gene combined agricultural products, bio-agricultural chemicals, gene exploration technologies, and gene diagnosis. Section 2 describes technological strategies in four fields. To explain, the improvement in foundations to raise efficiencies in research and development and industrialization processes, strategies to place importance on such industrial fields as realizing 'wishes of people for happiness of diversified nature', the improvement of the environment in which people and societies can enjoy benefits brought about by growth of the industries, and structuring of institutions to promote industrialization of bio-technologies for the nation as a whole. (NEDO)

Fiscal 2000 project for promoting international cooperation. Survey report on preparation of technological information in APEC region (Upstream area: preparation of video for training); 2000 nendo kokusai kyoryoku suishin jigyo chosa hokokusho. APEC iki nai ni okeru gijutsu joho seibi ni kakawaru chosa (Joryu bunya - kenshu you video sakusei)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the purpose of spreading and promoting clean coal technology (CCT) in coal producing countries in the APEC region, videos for training use were prepared so as to contribute to the reduction in environmental problems through the introduction of the coal cleaning and wastewater treatment technologies used in Japanese mines. In the video, comparison is made between the untreated wastewater and cleaned water flowing in and out of a present coal-cleaning plant, with the purification ratio determined, recognisably showing the effect by the cleaning facilities, and introducing the type of equipment required to satisfy the standard under the regulation. Also introduced is a technology for utilizing sludge collected in a sedimentation pond and fly ash scavenged in a private power plant. The videotape was prepared for 40 reels in English, 40 in Chinese, and 20 in Indonesian. The video title is 'Environmental safeguard of coal cleaning plant', and the contents are the importance of wastewater treatment and measures against water pollution, wastewater treatment technology in Taiheiyo coal mines, and wastewater treatment technology in Ikeshima coal mines. (NEDO)

FY 2000 report on the research cooperation project - Research cooperation in developmental support for oil producing countries. Joint project for the technology development for automobile maintenance in Saudi Arabia; 2000 nendo san'yukoku kaihatsu shien kenkyu kyoryoku jigyo seika hokokusho. Saujiarabia jidosha seibi gijutsu kaihatsu kyodo project

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

For the purpose of spreading the technology for automobile maintenance in Saudi Arabia, an investigational study was made of the actual state of the automobile utilization environment in Saudi Arabia. In Saudi Arabia, air pollution is becoming a serious problem with the rapid progress of motorization, and measures for automobile maintenance technology should be taken such as the use of lead-free gasoline, spread of catalyst car and introduction of new engine technology. However, the number of able car mechanics with Saudi Arabian nationality is low, and they rely on workers from other countries for it. Further, usually people continuously drive cars at high speed under the severe environment where there are high temperature, solar radiation, dust, etc. As a result of the study, the following were cited as the maintenance technology of which the R and D are expected: technology for lead-free gasoline, basic education for electronics, technology for use of trouble diagnosis unit, technology of preventive maintenance supposing high speed traveling, technology for recycle use of parts, standards for maintenance of rubber parts, establishment of standards of maintenance of Saudi Arabia's own, making of technical books/data to be needed for training of Saudi Arabian engineers. (NEDO)

Survey on geothermal development promotion in fiscal 1998. Electromagnetic exploration (simplified MT method) (Separate data (No. A-4 for the Mt. Kunbetsu area)); 1998 nendo chinetsu kaihatsu sokushin chosa. Denji tansa (MT kan'iho) bessatsu shiryo (No.A-4 Kunbetsu chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This paper summarizes the result of electromagnetic exploration in the No. A-4 Mt. Kunbetsu area as a separate data for the geothermal development promotion survey. The orders are as follows: in the apparent specific resistance and phase curves, TE mode, TM mode, invariant mode; in the MT parameters, tipper magnitude, tipper strike, impedance rotation, skewness, impedance polar diagram; in the one-dimensional analysis result (TE mode), specific resistance model, measurement/analysis {rho}a-F diagram; in the one-dimensional analysis result (TM mode), specific resistance model, measurement/analysis {rho}a-F diagram; inthe one-dimensional analysis result (invariant mode), specific resistance model, measurement/analysis {rho}a-F diagram; in the measurement value list, tipper magnitude, tipper phase, tipper strike, skewness; and in the value list for the one-dimensional analysis result, TE mode, TM mode, invariant mode and the value list for the two-dimensional analysis result. (NEDO)

Fiscal 1989 geothermal development promotion survey. Annex to on-the-ground survey report, geothermal development promotion survey (Geochemical survey report - No. 32: Hachijojima district); 1989 nendo chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo (Chikagaku chosa hokokusho - No.32 Hachijojima chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-11-01

A geochemical survey was conducted by examining soil gas and hot spa water temperature for contributing to the clarification of the subsurface geothermal structure in the Hachijojima district, Tokyo. Mercury concentration, carbon dioxide gas concentration, and 1 m-deep temperature were measured at 155 sites; and chemical and isotope analyses were conducted for 10 specimens of hot spa water and 6 specimens of surface water. After examination, 5 significant locations were isolated at the regions of Yaene-Ogago, Taredo, the northern foot of Mt. Nishi to Weather Station, the southern foot of Mt. Higashi, and the region to the south of Mt. Higashi with hot spa distributed therein. The significant locations are situated in the vicinity of a mar that produced deposit by magma-steam eruption, an alteration zone, and the parasitic volcano in Mt. Higashi, and in an area with hot spa distributed therein. It is therefore concluded that they are closely related with volcanic activities. It is inferred that geothermal signs in the Mt. Nishi area reflect a relatively deep-seated structure. As for the mercury and carbon dioxide gas concentration levels in the Mt. Higashi area, it is inferred that they again represent geothermal signs reflecting a relatively deep-seated structure. (NEDO)

Fiscal 2000 report on geothermal energy development promotion survey. Phase 1. Report on environmental impact survey in No. C-5 Appi district (Weather); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho. No.C-5. Appi chiiki - kankyo eikyo chosa (kisho) dai 1 ji

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

For grasping the characteristics of weather, climate, and natural earthquakes in and around the geothermal survey area in the Appi district, Iwate Prefecture, observation data of weather stations or the like in the neighborhood were collected and put in an easy-to-use order. Weather and earthquake data of the 1990-1999 decade were collected and subjected to statistical processing. Weather in the Appi District Survey C area is characterized in that it assumes the Japan Sea side pattern with much snow in winter and much rain in the rainy season. In the other seasons, however, it assumes the Pacific side inland pattern. Weather data in the Appi district and its vicinity are deemed to be similar to the values observed at the Hachimantai weather station. The area covered by the survey, however, is higher than the Hachimantai weather station by 400-900m, and therefore is that much colder and has more rain and snow. As for earthquakes, a total of 647 were recorded in the decade 1990-1999. In the Appi District Survey C area, which is approximately 20km times 20km large, suffered 31.1 events/month in 1998, which indicated a great rise in seismic occurrence. The rise is now attributed to the volcanic activity of Mt. Iwate which is deemed to be waning. (NEDO)

Report for fiscal 2000 on electronic patient record network discussion committee. Survey on promotion of medical information use utilizing electronic patient record network; 2000 nendo denshi karute network kento iinkai hokokusho. Denshi karute network wo katsuyoshita iryo johoka no sokushin ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Based on the movements in the most advanced IT technologies and in social system reformation in the medical and health preservation fields, discussions were given on the assignments and measures to be solved to realize the medical information network, and the secondary utilization method of the medical information and the assignments and measures in the utilization thereof. A patient record is originally a document stating the secrets of a patient for his or her medical information, and has a nature that doctors may be sued from the patient if they disclose or exchange the document. There is a large number of company owners, politicians or salaried people who would not want their diseases which they had in the past, the name of the existing disease and medical treatment to be made public. The electronic patient record network has a conflicting proposition to elevate its values by means of data re-utilization, secondary utilization and information exchange. Preparation of the database requires multilateral analyses and classifications, as well as sufficient discussions and realistic execution including the consistency with the personal information protection law, as to whether it is information that the patient wants the exchange or disclosure, or whether it is information to be exchanged or disclosed even if the patient refuses it, not speak of attention to 5W1H. (NEDO)

Fiscal 1998 investigation of geothermal development and promotion in Akinomiya area survey. Report on exploratory drilling/well survey and incidental work (1/2); 1998 nendo chinetsu kaihatsu sokushin chosa Akinomiya chiiki chosa hokokusho. 1/2. Shisui kussaku koji kosei chosa oyobi futai koji

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-01-01

Exploratory drilling and well survey were conducted, for the purpose of grasping underground geological structure, temperature and physical properties of Akinomiya area, Akita prefecture, as a part of fiscal 1998 investigation of geothermal development and promotion. The exploratory drilling well N10-AY-6 was excavated to the depth of 1,701 m. This well had a small lost circulation of about 4.2 kL/h at the end of drilling; hence, pressurized water injection was carried out for the purpose of enhancing the performance as a reducing well, resulting in an improvement to 21.6 kL/h. The well N10-AY-7 was in the bedrocks of the Old Tertiary system at the depth of 492 m or deeper, which revealed that the Old Tertiary bedrocks lay more shallowly than expected. At the depth of 1,900 m, the maximum temperature showed 223.3 degree C. In a temperature recovery test, it climbed to 277.2 degree C at the depth of 1,400 m. In the well N10-AY-8, the Old Tertiary bedrocks were found drilled at the depth of 87 m or deeper. Inside well temperatures at the time of temperature recovery test showed nearly the same degrees from the depth of 880 m to 1,090 m or about, thereafter rising until the depth of 1,330 m, further rising from 1,370 m until the bottom of the well, and showing the maximum temperature of 277.0 degree C at the depth of 1,450 m. (NEDO)

FY 1992 report on the survey of geothermal development promotion. Geological structure (geology/alteration zone) survey (No. A-1 - Haneyama area); 1992 nendo chinetsu kaihatsu sokushin chosa chijo chosa hokokusho futai shiryo. Chishitsu kozo (chishitsu henshitsutai) chosa hokokusho (No. A-1 Haneyama chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

For the purpose of elucidating a possibility of existence of geothermal reservoirs in the Haneyama area, Oita Prefecture, survey of the geological structure (geology/alteration zone) was conducted. The survey was made for the area of 280km{sup 2} lying from Kusu Town to Kokonoe Town, Oita Prefecture in terms of the route survey of 174km, fabrication/judgement of 52 rock slices, whole rock chemical analysis of 21 rocks, age determination, analysis of rock mineral, X-ray diffraction, literature collection, etc. As a result of the survey, the following conclusion was obtained. When considering a possibility of existence of heat source near this area, the area near the present volcanic front was regarded as promising. The fracture structure in the depths seen in the gravity structure (part of sharp dip of gravity) is more closely related to activity of geothermal water than the active structure of E-W system near the earth surface newly formed and is important when considering the existence of geothermal resource. The periphery of the Shishimuta sedimentation zone where Takigami, Oodake, Hacchobaru and Oguni are located was especially regarded as an area propmising of geothermal energy. In the survey area, the geothermal potential was the highest near Noya - Mizuwake Pass. (NEDO)

Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system using CSD and other wastes; Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (CSD nado haikibutsu riyo) jigyoka FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This report presents the feasibility of enterprise on power generation by thermal recycle and selling power together with volume reduction, de-harming (de-toxification) and stabilization of the shredder dust. Contents of the study include the investigation of generation amount of car shredder dust (CSD) and its properties, trial design of high efficiency power generation facilities, selection of boiler tube materials, incineration test with a melting kiln test plant, disposal and effective use of melted slag and fly ash, and environmental impact assessment. The capacity of waste disposal in the trial design contains 1,140 ton/day of shredder dust, 60 ton/day of waste plastics, sludge and waste paper, and 130 ton/day of waste oil. Melting kiln with secondary combustion chamber was adopted as the incineration type. The high temperature and high pressure waste heat boiler with an extraction condensing turbine was adopted as the waste heat recovery and power generation type. Stable combustion was confirmed from the results using a test plant. According to the consideration of cost and unit cost results for wholesale power supply, if it is postulated that income for waste disposal is 12,000 yen/ton, power generation costs in excess power selling and wholesales are 6.4 yen/kWh and 9.1 yen/kWh, respectively. 67 figs., 48 tabs.

Achievement report for fiscal 1997. Technological development for practical application of a solar energy power generation system /development of technology to manufacture solar cells/development of technology to manufacture thin film solar cells (development of technology to manufacture materials and substrates (development of technology to manufacture silicon crystal based high-quality materials and substrates)); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo denchi seizo gijutsu kaihatsu, usumaku taiyo denchi seizo gijutsu kaihatsu, zairyo kiban seizo gijutsu kaihatsu (silicon kesshokei kohinshitsu zairyo kiban no seizo gujutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

It is intended to develop thin film solar cells capable of mass production with high photo-stability and at low cost. Thus, the objective of the present research is to analyze the growth process of micro crystal silicon based thin films, the crystal being a high quality silicon crystal based material, and develop technology to manufacture high-quality micro crystal silicon thin films based on the findings therefrom. It was found that, when silicon source is available in cathode, pure hydrogen plasma forms micro crystal silicon films by using the plasma as a result of the chemical transportation effect from the silicon source. It was revealed that the crystal formation due to hydrogen plasma exposure is performed substantially by the crystals forming the films due to the chemical transportation effect, rather than crystallization in the vicinity of the surface. The crystal formation under this experiment was concluded that the formation takes place during film growth accompanied by diffusion of film forming precursors on the surface on which the film grows. According to the result obtained so far, the most important issue in the future is particularly the control of crystal growing azimuth by reducing the initially formed amorphous layer by controlling the stress in the initial phase for film formation, and by controlling the film forming precursors. (NEDO)

Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on second term final research and development (first report); Jisesdai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu bunshi bunrimaku zairyo (dainiki kenkyu kaihatsu hyoka)

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

This study is intended to establish a basic technology for innovative high-efficiency separation membrane materials that can be used in areas in which application of membrane separation has been impossible. The water/ethanol separation membrane (for water selective permeation) and water/acetic acid separation membrane (for water selective permeation) achieved separation coefficient and permeation velocity of the world's highest level. The water/ethanol separation membrane (for ethanol selective permeation), although its separation coefficient is lower than the world's highest performance, has high permeation velocity, providing the performance of the worldwide level as seen from the comprehensive viewpoint. The carbon monoxide/nitrogen separation membrane achieved separation coefficient and permeation velocity of the world's highest level. The oxygen/nitrogen separation membrane requires further enhancement in the permeation velocity and stability. Establishment has been performed on separation technologies for membrane separation of non-water soluble aqueous solutions, optical division by using chiral crown ether, high-performance liquid separation by means of plasma surface treatment, and particle separation. Basic analysis has been advanced also on evaluation technologies for gaseous body separation membrane and liquid separation membrane, of which future progress is expected. (NEDO)

Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Water related technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (mizu kanren gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the surveys to establish strategies in the water related technology field. The primary question relates to realizing a circulation type water utilization society. Establishment of technologies as the element technologies is demanded on treating trace amount harmful substances and pathogenically harmful micro-organisms such as environmental hormones. Technologies requiring early practical application include high-efficiency energy recovery from sludge by means of methane fermentation, accelerated oxidation and super critical sludge decomposition, and composting. Structuring a comprehensive water management information system is also important. Establishment is demanded on such technologies as high stability sensors to treat harmful chemical substances, ultra high sensitivity bio-sensors for risk control, and detection of pathogenic micro-organisms. Alga identification and quantification systems are also necessary. In developing a contaminated environmental water and waste water purification system, early practical application is desired on technologies to purify soil and large-quantity diluted environmental waters by utilizing such natural materials as soil and activated carbons, biotope and micro-organisms. Manufacture of high function water by utilizing electromagnetic waves and ultra-sonic waves, and high-efficiency low-cost desalting technologies by means of membrane separation and evaporation are also required to be developed as water resource utilizing and water making technologies. (NEDO)

Report on achievements in fiscal 1999 on the project for development of an energy use rationalizing technology. Development of a basic technology to design and fabricate an innovative light-weight structure; 1999 nendo kakushinteki keiryo kozo sekkei seizo kiban gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the achievements in fiscal 1999 on development of a basic technology to design and fabricate an innovative light-weight structure. Taking CFRP and aluminum alloy having excellent specific strength as the main object materials, weight reduction and reliability enhancement in aircraft structure are intended, while reducing largely the number of parts. In particular, the wings, the nose and the leading edge construction of civilian aircraft are of the structure assembled with a large number of parts, and are suitable as the research objects. A new conception will be introduced that structural members are fabricated by utilizing the characteristics of integrally formed CFRP, which will be assembled into a whole structure. Large structural metallic members currently used have such drawbacks as the use of great number of parts, complexity in manufacturing processes, low reliability, weight increase and corrosion due to rivet jointing. In order to solve these problems, development will be made on technologies for thin-wall large-size precision casting, and high-accuracy high-quality welding. To combine different kinds of members, and optimize strength, weight and economic performance of the entire structure, high-efficiency integration technologies will be discussed, and prototype full-size structure will be fabricated. The current fiscal year has started up the technology committee and its operation, analyzed technological problems in the entire structure, and established the action programs. An investigation was performed on the technological trends in overseas countries. (NEDO)

FY 2000 Medical/engineering cooperative research project. Basic research on high-sensitivity gene-aided diagnostic systems for cancers, based on free DNA in blood; 2000 nendo kecchu yuri DNA ni yoru gan no kokando idenshi shindan system ni kansuru kiban kenkyu jisseki hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The research and development project is conducted to develop new methods directly related to early discovery of potential cancer patients, and the FY 2000 results are reported. The FY 2000 efforts are directed to improvement of intra-Alu-PCR method as the superhigh-sensitivity quantitative method, almost established in the previous fiscal year, to have higher reliability and simplicity suitable for automatic diagnosis. It is concluded that (there is no difference of significance between normal persons and cancer patients in free DNA concentration in the blood, determined by the Boyle/intra-Alu-PCR method), but this method is confirmed to be useful for prognostic monitoring of the patients who have the marrow or peripheral vessel cell transplant. Detection of qualitative gene abnormality of DNA in the peripheral vessels is investigated using the K-ras, p53 gene. Certain results are obtained by the MSA method for the former, and by the newly introduced WAVE DNA fragment analysis system for the latter. However, there are still a number of problems to be solved before these methods are applicable to screening for general medical examinations. The research on the (analysis of gene abnormality of cancer itself) has made a notable progress. (NEDO)

Report on the results of the fiscal 1997 international research cooperation project. `Joint R and D industrial base technology` (development of functionally graded materials); 1997 nendo kokusai kyoryoku jigyo. `Sangyo kiban gijutsu kyodo kenkyu kaihatsu` keisha kinosei zairyo no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

For the purpose of developing functionally graded materials (FGM/LB) of thermal stress relaxation heat resistant large bulk state which are adoptable to high efficiency engine members, conducted in fiscal 1997 as intermediate target were the experiment for enlargement of the sintering process of FGM/LB with bore of up to 100mm, evaluation of physical properties, the basic development of the fabricating system facility for the commercialization. In the development of heat resistance use FGM/LB fabrication technology, to obtain ZrO2(3Y) stainless steel system FGM/LB, the following were fabricated in each bore size of 50-100mm by the research use large discharge plasma sintering machine: sintered bodies of ceramics/metal single substrate materials and mixed layer single substance materials, and FGM/LB sintered bodies without separation and crack which are composed of 9 intermediate graded layers. The survey was also made on the optimal composition and optimal sintering conditions toward the enlargement without unevenness. In the evaluation of physical properties, ZrO2(3Y)/stainless steel system was selected and test pieces were fabricated to obtain basic data on texture observation, distribution of hardness, fracture toughness, high temperature abrasion resistance, thermal expansion rates, etc. 27 refs., 108 figs., 43 tabs.

Report on research achievement in relation with developing fundamental combustion control technologies in fiscal 1998. Research and development of high-performance industrial furnaces; 1998 nendo nensho seigyo kiban gijutsu no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Development is intended to be made on fundamental combustion control technologies applicable to high-performance industrial furnaces that can reduce energy consumption and respond to environment preservation requirements. With an intention to achieve reduction in combustion exhaust gases such as carbon dioxide and nitrogen oxides, fundamental studies will be made on factors to decide flame shapes as represented by high-temperature combustion and flame shape control by utilizing microgravity environment, and researches will be made on combustion systems. Devices required for the experiments were fabricated to evaluate critical combustion characteristics of flames in furnaces including industrial furnaces, analyze and evaluate flame control parameters, and study low-pollution combustion technologies. Experimental methods acquired by 1997 were used for the experiments under the microgravity environment. Evaluation experiments were performed on flame shape control technologies and flame radiation characteristics, and basic experiments on the low-pollution combustion technologies. With these experiments, elucidation of the combustion mechanisms was launched by analyzing and evaluating the acquired data. A flame experimenting device for high-temperature preheated air completed by fiscal 1997 was used to acquire such combustion characteristics data as NOx discharge characteristics when the high-temperature preheated air is used. Based on the result thereof, verification was carried out on simulation models. (NEDO)

Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Human life engineering field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (ningen seikatsu kogaku bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the surveys in fiscal 1999 on establishing industrial technology strategies in the human life engineering field. The human life engineering is an engineering to identify scientifically humans and their living characteristics, and apply them to products, systems, and environment building. Market size for the human living related industries is more than two trillion yen, whose annual growth rate is 9%. Discussions were given on problems that hinder technological innovations in this field. What lacks is the comprehensive strategic conception, and insufficient is the structural approach by related organizations. Technological systems for designing have not been established, and technological foundations relative to human characteristics and living characteristics are not well arranged. Methods to evaluate research achievements have not been established, and the works on proposing international standards are weak. Insufficiency in human resource nurturing is also an issue. As the future prospect and strategies, such fields as psychology, recognition, and sensitivity are important for the seeds technologies, and so are the measurement of supportive technologies, and information processing. The human living engineering aims at supporting safety, freedom from care, and high-quality life, realizing industrial and technological competitiveness of the world top groups, and forming societies with activity and high quality. (NEDO)

FY2000 report of the research results on medical/engineering cooperative research project, fundamental research for minimally invasive/super-selective localized diagnosis and treatment; 2000 nendo igaku kogaku renkeigata kenkyu jigyo teishinshu kokando sentakuteki kyokusho shindan chiryo ichigenka system no kiban kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The research and development efforts are made for super-selective localized diagnosis and treatment and simultaneous observation of the treatment results at the catheter edge point, based on the molecular biology and gene engineering methods, and the FY 2000 results are reported. The program for investigating the catheter hardware designs include the diagrammatic evaluation of a multi-lumen multi-functional laparoscope and pancreatoscope for localized diagnosis and medical treatment. The program for development of diagnostic technology leads to development of double staining of cancer cells and macrophage, which allows the in vivo analysis of the cell-to-cell interactions. The program for studying the technology related to affective genes which can be diagnosed and treated by a catheter includes cloning of genes for therapy of chronic glomerular nephritis and adrenal neoplasm, and those for liver regeneration. The program for method of local delivery of genes includes studies on therapy of metastatic cancer of lymph node using liposome and adenovirus as a gene carrier, and on pulse laser delivery for local and efficient delivery of the genes. (NEDO)

Research report for fiscal 1995 on analysis and evaluation of demonstration tests for establishment of residential photovoltaic power generation load leveling technology (putting of related data into order); 1995 nendo kenkyu hokokusho. Jutaku you taiyoko hatsuden fuka heijunka gijutsu tou kakuritsu jissho shiken ni kansuru kaiseki hyoka (Kanren data no seibi)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research and development has been performed with the objectives to establish an evaluation technology for load leveling effect by using a small photovoltaic power generation system for residential use, to clarify the effectiveness of the system as a discrete power supply source through demonstration operation, and furthermore to achieve optimization of the small photovoltaic power generation system for residential use. This paper describes the actual state survey data related to grid connection systems for the small photovoltaic power generation system for residential use. The survey has been performed mainly on the system for individuals' use inside and outside Japan with regard to the small grid connection systems of 1-10 kW scale. The number of survey has reached 216 cases for 46 prefectures in Japan (1,004.02 kW in total), and 47 cases for 13 other countries (205.60 kW in total), or 263 cases in grand total (1,209.63 kW). These 263 cases were tabulated with items of owners (or the facility names and installation locations) as seen by territories (prefectures or countries), facility operators (or executing organizations), connection modes, and power generation scales. These data will serve for discussions on the load leveling effect and the optimized system forms. (NEDO)

Research report for fiscal 1995 on analysis and evaluation of demonstration tests for establishment of residential photovoltaic power generation load leveling technology (putting of related data into order); 1995 nendo kenkyu hokokusho. Jutaku you taiyoko hatsuden fuka heijunka gijutsu tou kakuritsu jissho shiken ni kansuru kaiseki hyoka (Kanren data no seibi)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research and development has been performed with the objectives to establish an evaluation technology for load leveling effect by using a small photovoltaic power generation system for residential use, to clarify the effectiveness of the system as a discrete power supply source through demonstration operation, and furthermore to achieve optimization of the small photovoltaic power generation system for residential use. This paper describes the actual state survey data related to grid connection systems for the small photovoltaic power generation system for residential use. The survey has been performed mainly on the system for individuals' use inside and outside Japan with regard to the small grid connection systems of 1-10 kW scale. The number of survey has reached 216 cases for 46 prefectures in Japan (1,004.02 kW in total), and 47 cases for 13 other countries (205.60 kW in total), or 263 cases in grand total (1,209.63 kW). These 263 cases were tabulated with items of owners (or the facility names and installation locations) as seen by territories (prefectures or countries), facility operators (or executing organizations), connection modes, and power generation scales. These data will serve for discussions on the load leveling effect and the optimized system forms. (NEDO)

Report on survey for high-performance industrial furnace introduction field test project in fiscal 1999. Activities to promote proliferation of the introduction to subject project related business entities; 1999 nendo koseino kogyoro donyu field test jigyo chosa hokokusho. Taisho jigyosha eno fukyu sokushin katsudo

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper reports the survey on high-performance industrial furnace introduction field test project in fiscal 1999. The development of a high-performance industrial furnace having been performed by NEDO since fiscal 1993 has completed the fundamental development research in fiscal 1998, and the planned achievements were verified (large energy saving, reduction of NOx emission, and down-sizing). Upon the result, the introduction field test project has started in fiscal 1998 for three years until fiscal 2000. The number of research items adopted in fiscal 1998 was 58, and those in fiscal 1999 was 51, which are progressing smoothly at the present. Reduction in CO2 emission of 50,000 tons was demonstrated as the achievement in fiscal 1998, and NOx emission realized the regulation value or lower in cities wherein each operator is executing the project. Several cases of down-sizing were also reported. In the proliferation promoting project in fiscal 1998, activities were made mainly to the subject project related business entities in relation with the development achievements and general technologies for the high-performance furnace. In fiscal 1999, communication transmission was continued by using information tools on introduction of the achievements and technologies. Attempts will be made on promoting the proliferation of the field test project in the future through a number of technology lecture meetings performed by specialists. (NEDO)

Effects of lactic acid bacteria in kimoto on sake brewing. Part 2. ; Promotion mechanism of enzymolysis in rice by teichoic acid. Kimotochu no nyusankin no seishu jozo ni oyobosu eikyo. 2. ; Kimotochu no nyusankin ni yuraisuru teikosan no. alpha. kamai yokai sokushin sayo kisaku

Energy Technology Data Exchange (ETDEWEB)

Mizoguchi, H.; Tsurumoto, M.; Furukawa, A.; Kawasaki, T. (Kikumasamune Sake Brewing Co. Ltd, Hyogo (Japan))

1991-07-25

In order to elucidate promotion mechanism of dissolution of {alpha}-rice (pregelatinized rice) by teichoic acid. adsorption of teichoic acid and {alpha}-amylase onto rice protein oryzenin was investigated by experiments. Teichoic acid was adsorbed well onto oryzenin and reduced adsorption of {alpha}-amylase. Adsorption of {alpha}-amylase onto rice powder was decreased logarithmically in proportion to the teichoic acid added. Both teichoic acid and {alpha}-amylase were adsorbed by histone, abundant in basic amino acids, and by anion-exchange resin. Adsorption of {alpha}-amylase onto them was reduced by coexistence with teichoic acid. As the results of experiments, it was inferred that teichoic acid became dissolvable through autolysis by lactic acid bacteria in kimoto, changed the state of electric charge on oryzenin surfaces through adsorption onto oryzenin by phosphoric group, decreasing adsorption of {alpha}-amylase onto oryzenin and increasing free {alpha}-amylase in the liquid phase, and thus increased the dissolution of {alpha}-rice. 9 refs., 6 figs., 3 tabs.

Report on geothermal development promotion survey in fiscal 1999. Survey on hot water (collection and analysis of hot water) in Tsujinodake Area No. B-6; 1999 nendo chinetsu kaihatsu sokushin chosa hokokusho. Nessui no chosa (nessui no saishu oyobi bunseki) No.B-6 Tsujinodake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-10-01

This paper reports the survey on hot water in the geothermal development promotion survey in fiscal 1999 in the Tsujinodake area. The hot water pumped up at the N11-TD-2 well is considered to have been originated from sea water mixed with the same amount of meteoric water including waters from Ikeda Lake and Unagi Pond, and been heated mainly by heat conduction. The hot water temperature near the well is 120 to 130 degrees C, but the upper stream of hot water flow is estimated to be 160 to 230 degrees C. The test samples collected and analyzed are those pumped up from depths greater than 1,500 m, having the same origin as the high temperature hot water of higher than 200 degrees C flowing sideways at the relatively shallow portions (depths of 400 to 800 m). The hot water is estimated to be rising from deep portions of mainly the north-east shore of Unagi Pond in which exhalation bands are located, and its temperature is considered to be 260 to 270 degrees C at deep sections. The high temperature geothermal reservoir spreading in relatively shallow sections of the N11-TD-2 well mainly around the vicinity of the north-east shore of Unagi Pond has a high possibility of being continued even to the vicinity of the west Ibusuki area in the north-east direction. However, the spread of the geothermal reservoir with high temperatures (200 degrees C or higher) is considered not too large in the direction of the Matsugakubo in the north-west and the Narikawa area direction in the south-east. (NEDO)

Research report on promotion of geothermal energy exploitation for fiscal 1997. Test drilling into the structure, construction work for research, and analysis (No.B-4 Kuenohira district); 1997 nendo chinetsu kaihatsu sokushin chosa. Kozo shisui chosa koji oyobi kaiseki hokokusho (No.B-4 Kuenohirayama chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

Cuttings from a test drilling in the Kuenohira district, Oita Prefecture, are subjected to analysis. The result of ground surface investigation suggested the presence of a magma reservoir to serve as heat source and a highly permeable zone along a fault to help the formation of a thermal water retention system. At the N9-KH-1 drilling site, however, no geothermal reservoir is found along the periphery of the subsidence in the western part of the research area. In this district, it is deemed, no geothermal reservoir has been formed due to shortage of heat supply from the heat source and insufficient geothermal water activity. It is also deemed that the district, in which fractures of the E-W system, NNW-SSE system, and NE-SW system are distributed, is a region at which meteoric water flows into larger convection systems. As for the westward stretch of the geothermal reservoir (where the N9-KH-1 site is situated) that has developed on the swell of the basement, detected to exist at N2-MW-2 and N3-MW-6 in the eastern part of the research area, it is found to be not so extensive. (NEDO)

Fiscal 2000 report on geothermal energy development promotion survey. Phase 1. Report on environmental impact survey in No. C-5 Appi district (Hot spa fluctuation); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho. No. C-5. Appi chiiki kankyo chosa (onsen hendo) dai 1 ji

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

For the assessment of the environmental impact to be produced by geothermal exploration well boring and short-term outburst tests, water in hot spas, fountains, and rivers in and around the Appi survey district was inspected for fluctuation. A survey was conducted of multiple components to help analysis of the geothermal reservoir structure. Distributed in the alteration zone in this district are the hot spas of Kusanoyu, Shin-Kusanoyu, Appi, and so forth, and, in the vicinity, numerous hot spas including Iwahatanoyu belonging to the Appi hot spa. In the multiple component survey, 12 hot spas, 1 fountain, 8 rivers, and 2 gas wells were subjected to measurement. In the fluctuation survey, 5 hot spas, 1 fountain, 5 rivers, and the amount of precipitation were subjected to measurement. In the survey of river bottom quality and river bed rocks, river bottom quality was checked at 18 spots and river bed rocks at 12 spots. It was found that fluctuation was great in the amount of welling water at Kusanoyu, Shin-kusanoyu, and Appi, with the coefficient of fluctuation recording 10 or more. A negative correlation was detected between the welling amount and water temperature. It is deemed that the hot water spurts out of natural fountains or shallow wells and that its temperature tends to grow lower with an increase in meteoric water by which it is diluted. (NEDO)

FY 1999 report on the comprehensive analysis of the geothermal development promotion survey. Forth. No.C-3 Akinomiya area (Separate volume 2: Collected data); 1999 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No. C-3 Akinomiya chiiki (Dai 4 ji) - Bessatsu 2 (shiryoshu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

As to the survey of the existence amount of geothermal resource in the Akinomiya area, Ogachi town, Akita prefecture, which was made in FY 1999, the comprehensive analysis was conducted, and the data were arranged. In relation to the surface survey, data on the following were described: geological survey, supplementary surface geological survey, soil gas survey, precision gravity survey, supplementary gravity survey and 3D model re-analysis, electromagnetic survey, etc. With relation to the well survey, data on the following: wells of N8-AY-1, N8-AY-2, N9-AY-3, N9-AY-4, N9-AY-5, N10-AY-6, N10-AY-7 and N10-AY-8, survey of cores of existing wells, temperature/pressure logging of wells remaining stationary after having been left long, sampler logging, etc. In relation to the jetting test, data on the short-term jetting test on wells of N8-AY-1, N8-AY-2, N9-AY-3, N9-AY-4, etc. With relation to the evaluation of reservoirs, data on the pressure monitoring, results of the reservoir simulation, etc. (NEDO)

Report on a survey for promotion of geothermal development and an overall analysis of areas in fiscal 1996. Report No.C-3 for the Akinomiya area (First analysis); 1996 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No.C-3 (Akinomiya chiiki dai 1 ji)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-01

This paper summarizes the result of a survey for promotion of geothermal development and an overall analysis of the Akinomiya area in fiscal 1996. The subject area is located in Katsuo Town in south of Akita Prefecture. The geothermal reservoirs are regulated by the irregular construction created by upheaval and subsidence of the pre-Tertiary basement rocks. The underground temperature construction shows the temperatures rising toward Mt. Yamabushi. The latest geothermal activities should have taken place after the eruption of Mt. Takamatsu. The geothermal activities near the Arayu area have been most active until recently, and is still predominant. Transformation activities were active in the former period of the Pleistocene era. The acidic transformation band has been active after sedimentation of andesites in Mt. Takamatsu thereafter, which should have been active not only in areas where it is now active on the ground surface, but also in greatly wider areas. Geothermal fluid flows being regulated by faults, whereas fractures with high permeability existing along the faults are suitable for developing steam collection. Hot spring waters were produced by the geothermal fluid having risen along the faults and been mixed with and diluted by ground surface water near the ground surface. Areas promising for geothermal development would spread over the areas with high permeability along structural lines such as faults which show the convection type temperature pattern and temperatures higher than 250 degrees C. (NEDO)

Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

FY 1999 report on the results of the study of the generative utilization basement technology of environmental friendly type metal base materials. Element/comprehensive process study; 1999 nendo kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu seika hokokusho. Yoso sogo process kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The R and D have been conducted since FY 1991 on the process in which scraps can be used with no reduction energy required in iron-making stage, and the results of FY 1999, the final fiscal year, were summarized. In the assessment study of the comprehensive system, a full scale of experiment was carried out of the experimental plant which was completed in March 1998. In this fiscal year, experiment was conducted on converter type and fixed bed type as preheating/melting method. As a result, the energy unit requirement, productivity, etc. which were targeted at first were obtained, and the experimental results expected at first were obtained on scrap preheating/melting technology/exhaust gas treatment. Moreover, the FS using the actual system was conducted, and the following conclusions were acquired: melting use primary energy decreased by more than 25% from that in the existing electric furnace; it is possible to arbitrarily select power loads at 80%-30% the same as those in the existing furnace; new melting method is more excellent in primary energy reduction than in advanced electric furnace as of FY 1999; it is possible to reduce primary energy by 25% also in the case of operating iron-melting in converter type and shaft type. (NEDO)

FY 1999 project on the development of new industry support type international standards. Standardization of a production process system (development of STEP standards); 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Seisan process system no hyojunka (STEP kiban kikaku no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The R and D were carried out of the standards of assembly models in design-production process and machining process data models for production preparation, and the FY 1999 results were summarized. Integrated AAM is a reference model to make relations with AP clear, and therefore, study was made with much higher accuracy. As to resource models to express product models which make change in design possible, studied were measures for changes in shape/dimension of parts, measures for changes related to connection in assembly, etc. As to resource models required to express the process of changes from design models to production models, arrangement was made of characteristics of the shape of design models and characteristics of production process models, and study was made of models to express the seamless work from design to processing. Study was also made of the method of conversion among design models and production preparation models. The results obtained were reported as N830 and N448 of ISOTC184/SC4/WG3. (NEDO)

Achievement report on research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a recombinant DNA utilizing technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research in fiscal 1981 on the 'research and development of a recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. For the method to create energy saving type bacteria stocks for processes centering around the escherichia coli, refinement was carried out on cytochrome P-450 and NADPH-cytochrome P-450 reduction enzyme respectively from hepatic microsome of rats administered with induction agents. Attempts were made to prepare antibodies working on them. For the method to create high-efficiency secreting bacteria stocks centering around bacillus subtilis, activity measurement and quantification were performed on enzymes external to the bacillus sutilis, and research was executed on introduction of neutral protease gene sensitive to bacillus subtilis temperatures into the NA20-S17 stock. For the method to create bacteria stocks to substitute raw materials used in the chemical industry, studies were performed on separation of enzymes and corresponding genes, and incorporation of the genes into the escherichia coli. In the comprehensive investigation and research on the recombinant DNA utilizing technology, information exchange and discussions meetings were held, and investigations were made on literatures and patents. (NEDO)

Achievement report on research and development of the industrial basic technologies of the next generation in fiscal 1985. Research and development of composite materials (Separate edition (1)); 1985 nendo jisedai sangyo kiban gijutsu itaku kenkyu seika hokokusho. Fukugo zairyo no kenkyu kaihatsu (bessatsu 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-01

Described herein are the results of the research and development project for developing composite materials as the basic technologies of the next generation, for patent/utility application situations, know-how techniques, processing procedures, computer code lists, and database/file lists. A total of 81 inventions are applied for patents and 3 inventions for utilities, of which 8 inventions are applied to the foreign countries. The know-how techniques developed by the project include basic testers for continuous molding of closed sections, systems for continuously withdrawing the molded articles, hot rolling molding processes which use no rolling jigs, and HIP processes for aluminum-based powders. A total of 10 processing procedures are drawn, including those for monolithic molding of panel structures, monolithic molding of planar and angled PGI/CF, production of carbon fiber/aluminum-based wire reforms, pressing, rolling, HIP molding, and melt/extrusion molding. The computer code lists include strength/rigidity/vibration optimization programs, buckling optimization programs, and impact analysis/two-dimensional of the composite materials. (NEDO)

Test and survey on a next generation coal liquefying catalyst. Coal molecule scientific test and survey as the base for commercializing the coal liquefying technology; Jisedai sekitan ekika shokubai shiken chosa. Sekitan ekika gijutsu shogyoka kiban to shite no sekitan bunshi kagaku shiken chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The test and survey on a next generation coal liquefying catalyst present a new proposal to raise catalytic activity in coal liquefaction, and perform demonstration experiments in a laboratory scale to search for possibility of developing a new coal liquefying catalyst from various viewpoints. To explain, discussions were given on the catalyst to perform the followings: liquefaction under extremely mild conditions by using ultra strong acids not limited only to metals; ion exchange method and swell carrying method to raise catalyst dispersion very highly, enhance the catalytic activity, and reduce the amount of catalyst to be used; mechanism of producing catalyst activating species to further enhance the activity of iron catalysts; and pursuit of morphological change in the activating species. The coal molecule scientific test and survey as the base for commercializing the coal liquefying technology performed the studies on the following items: pretreatment of coal that can realize reduction of coal liquefaction cost; configuration of the liquefaction reaction, liquefying catalysts, hydrocarbon gas generating mechanism, status of catalysts after liquefaction reaction, and reduction in gas purification cost by using gas separating membranes. Future possibilities were further searched through frank and constructive opinion exchanges among the committee members. (NEDO)

Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a voluminous cell incubation technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research and development in fiscal 1981 on the 'voluminous cell incubation technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. In the research of a method for producing industrial materials using cells originated from lymph-based trunk cells, researches were performed on selection and breeding of cells, development of serum-free media, and establishment of the optimal culture method with regard to the method for producing industrial materials using stocks producing virus induced interferon. Regarding the method for producing industrial materials using idio-interferon producing mutable stocks, research and development was made on selection and breeding of superior cell stocks and serum-free media. With regard to the method for producing industrial materials using marrow originated cells, such researches were carried out as technological investigations, collection of cells, establishment of the proliferating condition for myeloid leukemia cells, discussions on the assay method for differentiation inducing factors, and search for cells producing useful substances. Other activities include research of the method for producing industrial materials using cells originated from epithelium cells, information exchange on voluminous cell incubation technologies, and investigations on literatures and patents. (NEDO)

Fiscal 2000 achievement report on project for research and development of intelligent infrastructure creation and utilization technologies. Research and development of reference materials for polymers; 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu jigyo seika hokokusho. Kobunshi ni kansuru hyojun busshitsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As one of the efforts to establish national reference materials at an accelerated pace in a concentrated manner, a comprehensive survey was conducted on reference materials for polymers, and research and research was conducted for the development of such. In the comprehensive survey, investigations were made into the actual use of reference materials for polymers and their management at private-sector enterprises and public research institutes in Japan and at research bodies in the U.S. and Canada. In the development of reference materials for polymers, a procedure was contrived for synthesizing monodisperse oligostyrene specimens, polymerization was carried out using an improved synthetic method, and molecular weight distribution was analyzed. Using a homogeneous oligostyrene reference material for calibration, the mean molecular weight of an oligostyrene reference material was accurately evaluated by size-excluded chromatography. In the case of a specimen with its mean molecular weight not more than 1,000, the result exhibited excellent agreement with what supercritical fluid chromatography indicated. In the development of reference materials for characteristics evaluation, this in relation to methods for evaluating thermomechanical characteristics of plastics, efforts were made to develop reference materials for evaluating dynamic viscosity/elasticity of solid plastics. (NEDO)

Achievement report for fiscal 1987 on the entrusted research and development of basic technologies for next-generation industries. Research and development of technologies of mass culture of cells; 1987 nendo jisedai sangyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The aim is to add value to the chemical industry by establishing technologies for realizing a large and stable supply of fine chemical products whose industrial production is difficult when conventional techniques are applied, the products including various useful substances yielded by animal cells including those of man. To fulfill the aim, efforts are exerted to complete basic technologies involving the mass culture of cells through conducting researches into animal biofunctions. This report covers the endeavors made in fiscal 1987 under the above-named project created in fiscal 1981. All the subject matters are for the development of substance production methods for industrial use, and include the studies of use of optimal cultivation methods mainly for serumless cultures and cultivation engineering, studies centering on the high-density cultivation of cells and serumless cultures, studies using suspended and quasi-suspended cell lines, studies using cells deriving from bone marrow, and studies using epithelial cells. Furthermore, the results are outlined of the comprehensive researches conducted into technologies of mass cultivation of cells. (NEDO)

Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1981. Research and development of a voluminous cell incubation technology; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Saibo tairyo baiyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Achievements were compiled on the research and development in fiscal 1981 on the 'voluminous cell incubation technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. In the research of a method for producing industrial materials using cells originated from lymph-based trunk cells, researches were performed on selection and breeding of cells, development of serum-free media, and establishment of the optimal culture method with regard to the method for producing industrial materials using stocks producing virus induced interferon. Regarding the method for producing industrial materials using idio-interferon producing mutable stocks, research and development was made on selection and breeding of superior cell stocks and serum-free media. With regard to the method for producing industrial materials using marrow originated cells, such researches were carried out as technological investigations, collection of cells, establishment of the proliferating condition for myeloid leukemia cells, discussions on the assay method for differentiation inducing factors, and search for cells producing useful substances. Other activities include research of the method for producing industrial materials using cells originated from epithelium cells, information exchange on voluminous cell incubation technologies, and investigations on literatures and patents. (NEDO)

Technological development for super-high efficiency solar cells. Technological development of solar-high efficiency singlecrystalline silicon solar cells (high quality singlecrystalline silicon substrates); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Chokokoritsu tankessho silicon taiyo denchi no gijutsu kaihatsu (kohinshitsu tankessho silicon kiban no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on technological development for high quality efficiency singlecrystalline silicon substrates in fiscal 1994. (1) On electromagnetic casting/once FZ bath method, a Si single crystal of 600mm long was successfully obtained by improvement of power source frequency and furnace parts. High carbon content resulted in no single crystal including solids. In undoped electromagnetic casting ingots, resistivities over 1500ohm-cm were obtained because of effective preventive measures from contaminants. (2) On electromagnetic melting CZ method, since vibration and temperature control of melt surface by magnetic shield was insufficient for stable pulling of single crystals, its practical use was hopeless. (3) On electron beam melting CZ method, a Si single crystal of 25mm in diameter was obtained by preventive measures from evaporation of Si and influence of deposits, and improved uniform deposition distribution in a furnace. The oscillation circuit constant of power source, and water-cooling copper crucible structure were also analyzed for the optimum design of electromagnetic melting furnaces. 3 figs., 1 tab.

Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si substrates); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (usugata takessho kigan seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on manufacturing technologies for low-cost high-quality Si substrates in fiscal 1994. (1) On the 220mm square type electromagnetic casting technology, development of fast stable casting technology was studied using the previously installed 220mm square type electromagnetic casting furnace. As a result, continuous stable casting was achieved at high casting speed up to 3.0mm/min. Any degradation of crystalline quality due to high speed casting was not found. (2) On the 350mm square type electromagnetic casting furnace, oscillation circuit constants were analyzed for design of the power source for No.4 electromagnetic casting furnace. In graphite heating experiment using the 350mm square type water-cooling copper crucible heated by 1000kW high-frequency power source, sufficient heat quantity was obtained for initial melting of Si. Any problems in Si melting were not found through Al block melting test. 6 figs.

Research and development of the industrial basic technologies of the next generation, 'composite materials (highly functional, crystal-controlled alloys)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'koseino kessho seigyo gokin'. Zenki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The results of the first phase research and development project for developing highly functional, crystal-controlled alloys as the basic technologies of the next generation are evaluated. The R and D themes are selected to develop alloys superhighly resistant to heat, heat-resistant/high-rigidity and light/high-rigidity by controlling their crystals. Development of the basic techniques for these materials is of high significance, and highly rated. The efforts in the first-phase R and D project are aimed at designs of a total of 12 types of single-crystal alloys by the computer-aided alloy designing techniques, production of these alloys on a trial basis, and evaluation of their characteristics, for the alloys superhighly resistant to heat. Two of them are confirmed to be superior to the others, and selected as the alloys to be developed. This project has also established the single-crystal casting techniques, which allow crystal orientation almost completely. Various types of heat-resistant/high-rigidity and light/high-rigidity alloys are designed, produced on a trial basis, and evaluated for their characteristics. As a result, one alloy type is selected for each category. The other techniques developed by this project include those for adjusting powders for light/high-rigidity alloys whose average grain sizes are controlled and impurity contents are reduced. Bright prospects have been obtained for the techniques for superplastically forging the disk shapes. These efforts have almost achieved the development objectives of the first-phase R and D project. (NEDO)

Achievement Report for fiscal 1997 on developing a silicon manufacturing process with reduced energy consumption. Development of technology to manufacture high quality solar cell silicon substrates; 1997 nendo energy shiyo gorika silicon seizo process kaihatsu. Kohinshitsu taiyo denchiyo silicon kiban seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

It is intended to establish an energy saving type mass production technology to manufacture solar cell substrates by using the electromagnetic casting process. This paper describes the achievements in fiscal 1997. Preliminary experiments were performed for high-performance slicing processing and post-slicing rinsing to reduce the cost by enhancing productivity in the slicing process. Since there is a problem of mixing of contaminating raw materials due to diversification in raw materials, resistance and impurity concentration must be determined on each raw material as the materials for the Czochralski method. Then, the raw materials are sorted out referring to the determination results, and they can be used for the electromagnetic casting process upon optimizing them. As a result of having sliced an ingot of 15-cm square with a length of 40 cm by using a mass-production wire saw, an accuracy of 22.8 {mu}m was attained as intra-face variance when the required cutting time was 476 minutes and the substrate thickness is 348 {mu}, thus having obtained prospect for achieving the standard. Development was made on a water jetting rough cleaning machine to separate and remove slurries (oil and grinding particles) from the substrates after slicing, and an arm robot to accommodate substrates into cassettes, which provided processing velocity of 9 second per substrate. A problem of raising the speed remains to be solved. (NEDO)

Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1982. Research and development of a recombinant DNA utilizing technology; 1982 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-01

Achievements were compiled on the research and development in fiscal 1982 on the 'recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. With regard to refined cytochrome P-450 molecular species, a material was obtained that has further higher specific content than those having been discovered in fiscal 1981. Refinement was carried out on antibodies against P-450 and NADPH-cytochrome P-450 reduction enzyme to raise the antibody values. Identification was made on the refined cytochrome P-450 molecular species. The P-450 in the mRNA products prepared in fiscal 1981 was quantified successfully by means of the immuno sedimentation process using protein A-sepharose. In fabrication of cytochrome P-450cDNA, detailed discussions were given on the cDNA fabrication and reaction conditions, where double-chain cDNA was obtained. In refining the enzymatic cytochrome P-450, discussions on culture conditions of the enzyme discovered a condition in which the P-450 content increases. (NEDO)

Report on the FY 1999 medical/engineering joint research project. Basic research on a high-sensitivity gene diagnosis system for cancer by free DNA in blood; 1999 nendo kecchu yuri DNA ni yoru gan no kokando idenshi shindan system ni kansuru kiban kenkyu jisseki hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A 3-year (FY 1999-FY 2002) research plan titled 'The basic research on a high-sensitivity gene diagnosis system for cancer by free DNA in blood' was worked out and the study was started. The plan is as follows. It is confirmed that the quantitative study of peripheral blood free DNA becomes the information useful for early finding-out of cancer carriers, and the reliability and limits are made clear. By widely searching for gene anomaly of cancer itself, it is confirmed that it is possible to diagnose anomaly in quality of genes in peripheral blood free DNA. For those purposes, technology is developed for high-sensitively detecting/quantifying free DNA of peripheral blood, etc. and further detecting anomaly of the genes comprehensively, and the medical/engineering joint research is conducted to realize the early diagnosis of cancer. In FY 1999, the following studies were started using detection/analysis technology mainly by polymerase chain reaction (PCR): development of high-sensitivity detection technology of free DNA, development of high-sensitivity detection technology of gene anomaly, study of the cancer-origin gene anomaly, etc. (NEDO)

Achievement report on commissioned research and development of basic technologies for the next generation industries in fiscal 1982. Research and development of a recombinant DNA utilizing technology; 1982 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Kumikae DNA riyo gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-01

Achievements were compiled on the research and development in fiscal 1982 on the 'recombinant DNA utilizing technology', which has been performed according to the 'institution for research and development of basic technologies for the next generation industries'. With regard to refined cytochrome P-450 molecular species, a material was obtained that has further higher specific content than those having been discovered in fiscal 1981. Refinement was carried out on antibodies against P-450 and NADPH-cytochrome P-450 reduction enzyme to raise the antibody values. Identification was made on the refined cytochrome P-450 molecular species. The P-450 in the mRNA products prepared in fiscal 1981 was quantified successfully by means of the immuno sedimentation process using protein A-sepharose. In fabrication of cytochrome P-450cDNA, detailed discussions were given on the cDNA fabrication and reaction conditions, where double-chain cDNA was obtained. In refining the enzymatic cytochrome P-450, discussions on culture conditions of the enzyme discovered a condition in which the P-450 content increases. (NEDO)

Fiscal 2000 survey report on Asia/Pacific Regional Environment Problems Researcher Exchange Promotion Projects. Construction of Environmental Technology Research Network in the Asia/Pacific Region; 2000 nendo Asia Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho. Asia/Taiheiyo chiiki kankyo gijutsu kenkyu kaihatsu network kochiku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of developing and popularizing environment conservation technologies in the Asia/Pacific region, activities were conducted for Environmental Technology Research Network in the Asia/Pacific Area (ETERNET-APR). In this fiscal year, under the motto of Expansion of International Collaborative Researches on Environmental Technology, a 7th international workshop was held in Yokkaichi City, Mie Prefecture, with the attendance of approximately 60 people in Japan and from abroad. Researchers from overseas, in addition, attended a 10-day training program at the National Institute for Resources and Development and others in preparation for the embodiment of international collaborative research. A survey was conducted overseas for the promotion of database utilization and registration and for grasping the problems intrinsic to the respective research institutes and problems to occur at every stage of development. People's Republic of China was visited, where a miniscale workshop was held, study tours were made, and opinions were exchanged. It was actually felt, at the places that were visited, that ETERNET-APR was certainly in function in various fields. (NEDO)

Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system (industrial refuse derived fuel and gas turbine combined type); Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (sangyo RDF GT fukugogata) jigyoka FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

High efficiency power generation, which is useful for promoting the environment-friendly type energy and coordinated community, is investigated by combining a steam turbine power generation system using the PS-RDF (paper sludge-refuse derived fuel) and a gas turbine (GT) combined cycle. Industrialization plan for processing PS in low cost has been made to ensure the profitability by participating the wholesale power supply under the law of electric power industry. This combined system is similar to the so-called super power generation using municipal garbage, but the lower temperature of steam from GT waste heat boilers (WHB) is super-heated by the flue gas from RDF boiler, which is called advanced power generation system (A.S.S.). The total power generation capacity is 149,000 kW, which consists of three 35,000 kW units of GT and one 44,000 kW unit of steam turbine. When comparing the combined system (A.S.S.) and usual one with the independent installation of the RDF steam power generation system and a GT combined cycle, the A.S.S. provides the repowering efficiency of 7,600 kW output with exactly the same quantity of fuel input as usual one. 71 figs., 31 tabs.

Report on achievements in fiscal 1998. Research and development of a technology to promote non-ferrous metal based material recycling. (Research on component technologies and a total system); 1998 nendo hitetsu kinzokukei sozai recycle sokushin gijutsu seika hokokusho. Kenkyu kaihatsu yoso gijutsu kenkyu, total system kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project is intended to research and develop a high level aluminum recycling technology to realize the 'product to product' philosophy to return different aluminum scraps into the original materials, while attempting to develop and unify the aluminum recycling technologies and promote utilization of LNG. This fiscal year has studied the following methods as the component technology research: (1) an inclusion removing method, (2) a crystal sorting method, (3) a vacuum distillation method, and (4) a semi-melting method. The studies on (1), (2) and (3) were performed on identification of basic data and systematization to determine the life and facility specifications, with the full-swing demonstration tests being waited to start in fiscal 1999. The research and development on the item (4) was determined technologically feasible although additional discussions are required on the engineering aspect for practical application. The component technology study thereon will be finished with the current fiscal year. For the demonstration tests among the studies on total system technologies, the crystal sorting method and the vacuum distillation method had the achievements obtained in the research of the component technologies reflected directly to the facility design and fabrication. There has been no large-scale facility fabrication for the inclusion removing method and effective utilization of ash remaining in dross, and the researches were performed as scheduled. (NEDO)

FY 1999 report on the comprehensive analysis of the geothermal development promotion survey. Forth. No.C-3 Akinomiya area (Separate volume 1: Forth survey); 1999 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No. C-3 Akinomiya chiiki (Dai 4 ji) - Bessatsu 1 (Dai 4 ji chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

The paper reported the results of the long-term jetting test, etc. which were carried out as the forth survey of the geothermal development promotion survey in the Akinomiya area, Ogachi town, Akita prefecture. The jetting induction and the situation of production/reduction were described as follows. N9-AY-3 began to well spontaneously after being induced by sending air up to wellhead pressure of 4.8 MpaG. Damping was recognized for a month or so after the start of jetting. After that, however, no damping was recognized, nor was recognized the deterioration of the fluid enthalpy with age. The pH of geothermal water was definite, approximately 8, and the electric conductivity and Cl concentration were 8,500 {mu}S/cm and 2,600 mg/L, respectively. The maximum jetting capacity of N10-AY-8 was 10.4t/h in steam and 8.9t/h in geothermal water at wellhead pressure of 0.24 MPaG, and after that, it showed a tendency to lower. The flow rate of reduction of N8-AY-1 changed from 80-90t/h at the beginning to 60-70t/h. With the continued reduction, the lowering of reduction capacity was recognized. In the test, the following were carried out: temperature/pressure/spinner logging, test on pressure transition, survey of fluid properties, survey of jetting microseisms, etc. (NEDO)

Survey report for fiscal 1999 on advanced exploitation of coal overseas. Survey of coal exploitation enhancement overseas (Coal industry's measures for persistent low coal price); 1999 nendo kaigaitan kaihatsu kodoka nado chosa. Kaigaitan kaihatsu sokushin chosa (sekitan kakaku teimeika ni okeru sekitan sangyo no taiosaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Surveys were conducted of the trends of coal companies in the U.S. and Australia and of the lookout for new coal field development in Australia for the purpose of contributing to the stable supply of coal in the future. In the U.S., the coal industry has experienced serious changes in these ten years, and various corporations, such as Peabody, Arch Coal, CONSOL, and Kennecott have come to resort to drastic measures for their survival. In Australia, coal price is lower and contract terms are shorter with less demand for coal supply thanks to the economic crisis in Asia. As for demand for coal in Asia, on the other hand, it is deemed that in 2010 there will be a 41% increase over the 1995 level and that, therefore, coal field preservation and new field exploitation are necessary. Since production by strip mining in New South Wales State is to decrease in 2012 and after, it is expected that new projects will start only after 2012. Comprehensive development projects are going to be launched in the areas surrounding the Surat district, Queensland State, and therefore new projects will be easier to start in this region. Since the Surat coal is to be collected after a little stripping, it is expected that it will be able to compete with the Indonesian coal. (NEDO)

FY 1999 geothermal development promotion, development feasibility and commercialization technology studies. Report on the SWD method in No.B-5, Musadake area; 1999 nendo chinetsu kaihatsu sokushin chosa / kaihatsu kanosei chosa / jitsuyoka gijutsu chosa. SWD ho hokokusho (No.B-5 Busadake chiiki (N11-MD-3))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-02-01

Commercialization feasibility of the SWD method has been tested and studied. This method uses a bit as the vibration source while a drilling is excavated, to collect information of geological structures and the like in front of the bit. In this study, the reflected and direct waves propagating from the drill bit while the N11-MD-3 drilling was excavated at the Busadake area were extracted and analyzed by the receivers installed on the surface of the earth, to estimate the default shapes which determine the geothermal structures. Analysis of the direct waves has statistically determined that the defaults are inclined at 81.5 degrees, based on the reasonable assumption. No reflection of the waves by the default plane was observed. However, it was observed that the waves were reflected by the stratum planes, when drilling was excavated to 1,006 and 1,008 m, and the results were used to map the reflecting planes. No reflecting planes with a default in-between was obtained, because of, e.g., limited depth sections and large stratum inclination. As a result, no default shape could be estimated. It is however confirmed that the SWD method produces reflected waves by bit signals even in a geothermal area, suggesting applicability of the method to default detection. (NEDO)

Fiscal 1998 research achievement report. Project for developing key technologies for electronic devices (Projection X-ray exposure process technology and active reflective device structure technology); 1998 nendo denshi device kiban gijutsu kaihatsu jigyo seika hokokusho. Shukusho X sen roko process gijutsu to active hansha kozogata keisei gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

Studies were conducted for the development of technologies of the very advanced level relating to an ultrafine machining process and high-performance reflector type liquid crystal display structure formation. Studied in the research and development of projection X-ray exposure process technology were multi-layer film formation, absorbing body film formation, absorbing body machining, multi-layer film mask defect evaluation, and cleaning for defect reduction. As the result, multi-layer film formation by Helicon sputtering and formation and machining of film with Ta acting as absorbing body therein were carried out, and it was found by actual exposure experiments that there were excellent X-ray reflectivity and absorbing body contrast. Furthermore, a study was made of cleaning using dummy foreign matters, and 100% removal of dummy foreign matters was achieved across a range up to the 70nm level. Studied in the development of active reflective device structure technology were the addition of an electrical control function to the reflector, addition of an unreflected rays absorbing function, production of a bias stabilized device for the practical application of a memory function, and the development of materials for the fabrication of the said devices. (NEDO)

FY 2000 report on the results of the R and D of fundamental technologies of superconductivity applications. Development of technology to process low consumption power ultra high speed signals; 2000 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Teishohi denryoku chokosoku shingo shori gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

In relation to the project on the R and D of fundamental technologies of superconductivity applications, the FY 2000 results of the design/fabrication of superconducting circuits were summarized. As to the development of technology to design superconducting circuits, an increase in circuit scale was tried targeting AD converter use modulator and decimation filter. As a result, operation was confirmed in element circuits of flux quantum multiplier circuit, feed back driver, DC isolator, etc. Concerning the development of technology for standard junction and integration, RHEED observations on the thin film surface before/after etching and YBa{sub 2}Cu{sub 3}O{sub 7-x} re-deposition were tried to be made, and the potentiality as monitoring technology was indicated. With respect to the fabrication of small scale circuits for demonstration, the design/trial fabrication were made of the basic pattern of SFQ circuit elements such as DC-SFQ, T-FF and SQUID for inductance rating. In regard to the development of technology to measure characteristics of superconducting circuits, a system was fabricated for processing and measuring output signals from {sigma}-{delta} modulators by semiconductor circuits, and it made the evaluation of AD converter performance possible. (NEDO)

Research and development of basic technologies for the next generation industries. Summary of research achievements in fiscal 1992 (Research and development of superconductor materials and superconductor elements); Jisedai sangyo kiban gijutsu kenkyu kaihatsu 1992 nendo no kenkyu seika no gaiyo. Chodendo zairyo chodendo soshi no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

With an objective to establish basic technologies, research and development has been carried out to make it possible to utilize high-temperature superconductor materials in terms of engineering in the fields of electronics and electric power. In the research on superconductor materials in fiscal 1992, it was discovered from measurements of temperature change in polarization dependent EXAFS in thin YBCO film grown on an MgO substrate that relative displacement in copper atoms in CuO{sub 2} plane and peak oxygen, and relative displacement in copper atoms on a primary chain and peak oxygen show apparent increase at the critical superconduction temperature. It was verified that this phenomenon does not occur in materials that do not show superconduction. In the research and development of superconductor elements, full-swing research has begun toward establishing the following technologies: process technologies for a substrate that meets requirement of surface flatness required in electronic elements, a superconductor thin film that assures uniformity in interface composition and the laminated thin film tunnel junction that combines the superconductor thin film, an inter-layer insulation film, and ultra-fine processing to suppress deterioration, and a tunnel element technology as a technology to put the above technologies together. (NEDO)

Achievement report for fiscal 1998 on the research and development of a basic technology to apply superconduction. Development of a low power consuming and high-speed signal processing technology; 1998 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Teishohi denryoku chokosoku shingo shori gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

The development of a superconduction circuit designing and manufacturing technology has achieved the following results: with respect to designing a circuit for single flux quantum (SFQ), the 'high-speed high-accuracy AC converter for front end of software radio' was selected as the target for a prototype to demonstrate the performance of the SFQ circuit. In analyzing movements of different SFQ basic circuits, such circuit simulator software versions were introduced as Saber, WR-SPICE, Wins, and Microcap, different motion waveforms for basic theoretical circuits were derived to compare their performances, and the effectiveness was verified respectively. In trial fabrication of a small demonstration circuit, design parameters were acquired from SQUID. In developing the technology to measure superconduction circuit characteristics, the following results were obtained: with regard to the element measuring and evaluating technology, an in-plane distribution measuring device was started up; and with respect to the circuit characteristics measuring and evaluating technology, a measuring system with low noise and low magnetic field was introduced. Regarding the circuit high-speed characteristics evaluating technology, development was made on a micro-strip line and coplanar transmission route converter. (NEDO)

Fiscal 1999 research report. Research on the long-term energy technology strategy (Basic research on the industrial technology strategy (Material technology field)); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This research clarifies the future social issues and targets of industrial technology in a material field including metal, inorganic, organic, polymer and fiber materials, and proposes the strategy for achieving such targets, based on research on changes in science and technology trend (technical innovation), and analysis on present and future industrial and technical competition powers. The future basic technologies for enhancing such competition powers are as follows: (1) Resource/energy-saving production process, (2) Design/evaluation technology for fine textures or in an atomic level, (3) Divergence toward high-purity and composite materials, (4) Improvement of a functionality, (5) Improvement of surface treatment technologies, and (6) Development of new materials and production technologies by using computer. The following 5 strategies are proposed based on the common understanding that the Japanese material industry achieves the best material technology innovation in the world by 2010: (1) Material technology strategy, (2) Strong cooperation among the industry, university and government, (3) Preparation of an intellectual base and a standardization strategy, (4) Reform of intellectual property rights, and (5) Resource strategy. (NEDO)

Report on achievements in fiscal 1999 on research and development of an intellectual base creating and utilizing technology. Research and development of a high-efficiency human body measuring device; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu seika hokokusho. Kokoritsu jintai keisokuki no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the achievements in fiscal 1998 on developing a high-efficiency human body measuring device. Object building with high compatibility is requested in recent years, and a high-precision and high-efficiency measuring device for three-dimensional human body shape data is demanded. The ultimate target for the device is high-precision measurement of about 1 mm in about one second which is the time for human being capable of staying immovable. In association with proliferation of product designing by using a computer, the needs for data handling on computers are increasing sharply in industries. Proposals have been made by ISO and CEN on the standards for morphological characteristics of human being, inducing progress in international standardization of human body size and shape data. Structuring a database is also planned on three-dimensional shape data mainly in the U.S.A. The Human Life Engineering Research Center is studying development of a measuring device to measure human body types and sizes at high speed and accuracy. The device combines three-dimensional measurement by using an optical method with high-performance computerized image processing. The measuring device is supposed to be capable of outputting the measurement results as the size and three-dimensional shape data, so that the results can be applied to product designing quickly. (NEDO)

Achievement report for fiscal 1998 on the research and development of a basic technology to apply superconduction. Development of a low power consuming and high-speed signal processing technology; 1998 nendo chodendo oyo kiban gijutsu kenkyu kaihatsu seika hokokusho. Teishohi denryoku chokosoku shingo shori gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

The development of a superconduction circuit designing and manufacturing technology has achieved the following results: with respect to designing a circuit for single flux quantum (SFQ), the 'high-speed high-accuracy AC converter for front end of software radio' was selected as the target for a prototype to demonstrate the performance of the SFQ circuit. In analyzing movements of different SFQ basic circuits, such circuit simulator software versions were introduced as Saber, WR-SPICE, Wins, and Microcap, different motion waveforms for basic theoretical circuits were derived to compare their performances, and the effectiveness was verified respectively. In trial fabrication of a small demonstration circuit, design parameters were acquired from SQUID. In developing the technology to measure superconduction circuit characteristics, the following results were obtained: with regard to the element measuring and evaluating technology, an in-plane distribution measuring device was started up; and with respect to the circuit characteristics measuring and evaluating technology, a measuring system with low noise and low magnetic field was introduced. Regarding the circuit high-speed characteristics evaluating technology, development was made on a micro-strip line and coplanar transmission route converter. (NEDO)

Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Field of nurturing human resources in chemical technologies); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu senryaku (kagaku gijutsusha jinzai ikusei bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes nurturing of human resources in chemical technologies, as part of the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. In association with the progress in scientific technologies, convenience of living has been enhanced exceptionally. On the other hand, however, problems lie in a heap, such as in global environment, energy, resources and population. Safety of chemical substances is questioned. Industrial world is greeted with the times of bubble collapse, information orientation, internationalization, and great competition. Chemical industries are aiming at differentiation and power strengthening, but demanded of conversion into making more independent developments. A large number of problems difficult of solving must be overcome by progress of scientific technologies. The core of the progress is in innovation and creation of new chemical technologies. Since what shoulders the requirements is people, nurturing chemical engineers is the urgent and important issue. Chemical engineers are demanded of having knowledge and experience in environment and safety, and ethics to accomplish social responsibilities, not to speak of their specialty technologies. Human resource nurturing must be carried out effectively under collaboration and cooperation of universities and corporations, rather than they do it independently. This paper describes problems and solution ideas, such as institutions and programs, to achieve the goal. (NEDO)

Achievement report for fiscal 1999 on development of technology to promote reduction of discharge of dioxins. Development of technology to reduce discharge of dioxins in steel manufacturing processes; 1999 nendo dioxin rui haishutsu sakugen sokushin gijutsu kaihatsu seika hokokusho. Seiko kotei ni okeru dioxin rui haishutsu sakugen gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development has been performed on a scrap melting process to make dioxins emission concentration to 0.2 ng-TEQ/Nm{sup 3} or less in steel making electric furnaces. The testing facility is of semi-sealed structure, consisting of an arc dissolution furnace, an exhaust gas combustion section, an auxiliary combustion chamber, and a quenching chamber. In the arc dissolution chamber, oxygen and coke are blown in at the same time as turning the arc power supply on, and then secondary combustion air was blown in to burn carbon monoxide gas generated from steel melting. The temperature was raised to about 850 degrees C at which dioxins are decomposed in the auxiliary combustion chamber, and then quenched to 200 degrees C or lower in the quenching chamber to prevent recombination of dioxins. As a result of the test, the exhaust gas temperature after the combustion was estimated to have reached about 900 degrees C at which dioxins are decomposed. In addition, because it was possible to control the exhaust gas temperature at the outlet of the auxiliary combustion chamber to about 850 degrees C and the exhaust gas temperature at the outlet of the quenching chamber to 200 degrees C or lower, the dioxins concentration at the outlet of the quenching chamber was reduced successfully to the targeted value or lower. (NEDO)

FY 1999 report on the potential survey of the environmental friendly type coal utilization system. Survey on the spread/promotion of circulating fluidized bed boilers in China; 1999 nendo chosa hokoksho. Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku ni okeru junkan yukaboira no fukyu sokushin ni kakawaru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of contributing to the spread/promotion of Japanese-make circulating fluidized bed boilers with desulfurization function, survey was conducted of the state of utilization of circulating fluidized bed boilers, the needs, etc. in China. In the survey, field survey was made at two boiler manufacturers and four companies using boilers in Beijing city, Fujian province, Hubei province, etc. to grasp the state of utilization and study conditions for the spread/promotion of circulating fluidized bed boilers. The Chinese government is making efforts for the spread of circulating fluidized bed boilers. The number of the domestically existing circulating fluidized bed boilers is estimated at approximately 800, but almost none of them conducts furnace desulfurization. Further, the operating rate of boiler is not always high. The reasons are as follows: desulfurization costs high without connecting to the production; environmental regulation is still mild in China; reliability and maintenance technique are still at low levels. It is urgently desirable to spread highly reliable circulating fluidized bed boilers with desulfurization function, and accordingly, it is necessary to reduce the cost of Japanese-make boilers. (NEDO)

Report on survey in fiscal 1999 for promotion of geothermal development. Supplementary survey on data processing (fluid inclusion test) for Tsujinodake Area No. B-6; 1998 nendo chinetsu kaihatsu sokushin chosa hokokusho. Data shori ni kakawaru hosoku chosa (ryutai gan'yubutsu shiken nado) No.B-6 Tsujinodake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-10-01

This paper reports the fluid inclusion test in the Tsujinodake area in fiscal 1998 for the survey on promotion of geothermal development. The fluid inclusions were classified into three types: those with the maximum value or the average value of the homogenizing temperature agreeing nearly with the saturated boiling curve, those with the homogenizing temperature showing the interim temperature between the present well temperature and the saturated boiling curve, and those agreeing nearly with the present well temperature. It is presumed that the bed temperatures in depths of 1,125.30 m and 1,427.50 m have changed very little since after formation of the present circulating and flowing systems of geothermal waters until now. In contrast at the depth of 1,691.75 m, the bed temperature was estimated to have fallen slightly from that in the most active period of the geothermal water activities. As a result of the rock age measurement, it is estimated that, in the Nansatsu bed groups distributing around the N10-TD-1 well, the temperature has fallen gradually after having been subjected to hot water alteration actions at higher than 200 degrees C, and cooling has taken place down to 200 to 250 degrees C as the fission track date temperature of zircon in the relatively late period (about several hundred thousand years before). There should have been no thermal change that affects the age measurement up to now since then. (NEDO)

Report on joint research in fiscal 1999. Research and development of technology to promote recycling of non-ferrous metal materials (Report on achievement in researches of demonstration tests and total system technology); 1999 nendo hitetsu kinzokukei sozai recycle sokushin gijutsu seika hokokusho. Jissho shiken kenkyu, total system gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Development has been in progress on promotion of recycling the non-ferrous metal materials, particularly aluminum, base metals and rare metals (such as copper). For aluminum, researches were made on demonstration of the crystal separation process, vacuum deposition process, molten scrap cleaning technology, and residual dross utilizing technology. In the crystal separation process to remove Fe and Si, and the vacuum deposition process to remove Zn, trial operation and adjustments were performed on the demonstration and testing facilities, making simulation in the scale of 1000 tons a month possible. In the molten scrap cleaning technology, discussions were given on a method to install on the trough a filter permitting micro inclusions in the molten scrap, but no results as have been expected were obtained. The residual dross was used on a trial basis for applications such as road aggregate and refractory materials. In the exhaust treatment, it was recognized effective that activated carbon and slaked lime are used simultaneously to remove hydrochloric acid and dioxins. In developing a technology to regenerate high-grade copper from sludge dust, discussions were given on design, fabrication, and trial operation of the demonstration facilities, partly by using a demonstration plant, with regard to the five related technologies including a technology for high precision refining of scraps, and high-speed metal melting technology. (NEDO)

FY 1998 annual summary report on development of techniques for keeping water environments in good conditions by utilizing phenomena involving immobilization of microorganisms on soft structures of carbon fibers (abbreviated to carbon/water environment project); 1998 nendo tanso sen'i nansoshiki eno biseibutsu kochaku gensho wo riyoshita mizukankyo seibi gijutsu no kaihatsu seika hokokusho. Ryakusho tanso mizukankyo project

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project is aimed at creation of the new industry of keeping water environments in good conditions in wide amphitrichous areas by establishing the technical systems for applying the phenomena in which microorganisms are massively immobilized on a carbon fiber bundle suspended in water to, e.g., purification of sewage systems, rivers and ponds, and providing sites for algae to grow, and by commercializing these systems. The following 3 themes have been established. The first theme is to develop the techniques for braiding/weaving carbon fibers. The second theme is to analyze characteristics of the immobilized microorganism groups. The third theme is to establish the principles of utilization. The FY 1997 R&D efforts were directed to production of a total of 57 types of braided/woven carbon fibers, development of sizing agents, and analysis of microorganism groups. In FY 1998, the carbon fibers treated with new sizing agents have been developed, and the braided/woven carbon fibers are being tested in water purification systems and algae sites. It is found that the microorganism groups exhibit synergistic effects between the pumping function and carbon/gel materials. The simulation models are being developed for system designs. The systems which apparently show the effects of this method have been classified by analyzing the field test results. (NEDO)

FY 1998 annual report on the compilation of database of experts for development of welfare equipment. Surveys for collecting information of institutes supporting, e.g., welfare equipment research and development; 1998 nendo fukushi yogu no kaihatsu ni kakawaru senmonteki chiken wo yushita jinzai database no kochiku chosa hokokusho. Fukushi yogu kenkyu kaihatsu nado shien kikan joho seibi chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In order to promote supply of high-quality, inexpensive welfare equipment, the data about public testing and research institutes throughout Japan are collected for their organizations, research themes, expertized areas, relations with welfare equipment, future activity guidelines and the like, and expert employees, so that enterprises can have adequate advises from them, when they plan to start researches on and development of related equipment. Information was obtained by means of questionnaires returned back from a total of 127 institutes related to industrial testing and researches, and 61 institutes, e.g., rehabilitation centers, deeply related to welfare equipment. This reports compiles information on 48 institutes which are conducting researches or the like on welfare equipment. The compiled lists of the local institutes supporting welfare equipment research and development activities describe, e.g., their total expenses, numbers of technical experts, conditions of windows responsible for welfare equipment or the like, percentages of expenses related to welfare equipment on total expenses, percentages of numbers of technical experts responsible for welfare equipment on total numbers of technical experts, and major research themes on welfare equipment. (NEDO)

Report on the results of research and development under a consignment from NEDO on deca-nano quantum integrating transistor substrate technologies; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Deca-nano ryoshi shusekika soshi kiban gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Researches have been conducted on deca-nano quantum integrating transistor substrate technologies, and developments were made on a three-dimensional device simulator which can be used in deca-nano domains, and a circuit simulator to have quantifying function transistors coexist with silicon semiconductor integrated circuits. The researches were intended to develop a simulator capable of analyzing properties of very small silicon and compound semiconductor devices in deca-nano domains. The researches discussed the applicability of conventional simulators, calculated quantum levels in a three-dimensional hetero structure, and resulted in development of an electron wave propagation simulator in optional two-dimensional shapes, a quantum Monte Carlo simulator, and a three-dimensional semiconductor device simulator with quantum correction. On the other hand, in order to estimate characteristics of a hybrid circuit in which single electron transistors coexist with conventional transistors such as CMOS transistors, a single electron hybrid circuit simulator was developed. The development indicated that a CMOS-SET fused memory is promising as a future LSI memory. 22 refs., 116 figs., 3 tabs.

Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (technical development for production of high purity silicon); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (taiyo denchiyo silicon seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on development of manufacturing technologies of Si for solar cells in fiscal 1994. (1) P in Si could be successfully reduced to 0.1ppmw by EB melting method. The condition possible to reduce P in Si while continuously supplying metal Si was found. The 20kg class EB melting equipment was also designed and manufactured which can be connected with solidifying rough refining process. (2) Use of a water-cooling copper mold was studied using a small melting equipment for cost reduction in solidifying rough refining process. As a result, the prospect of crucible-free technology for removal of P and solidifying rough refining was obtained. (3) B in Si could be successfully reduced to the target of 0.1ppmw by vapor addition method using a plasma melting equipment. (4) The prototype SOG-Si achieved a conversion efficiency of 14.1% as solar cell. In addition, the advanced solar cell prepared by efficiency enhancement process achieved a conversion efficiency of 15.9%. 3 figs.

Fiscal 1991 research report. Research trend survey for next-generation industrial structure technology research and development project - Research and development of advanced materials for extreme environments; 1991 nendo jisedai sangyo kiban gijutsu kenkyu kaihatsu project ni kakawaru kenkyu doko chosa hokokusho. Chotaikankyosei senshin zairyo no kenkyu kaihatsu (sekitoku daiene)

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-01

Efforts were exerted to develop intermetallic compounds and C/C (carbon/carbon) composites to serve as advanced materials for extreme environments. In relation with advanced materials, especially with intermetallic compounds and fiber reinforced intermetallic compound composite materials, a technical research survey was conducted covering the three fields of (1) summarization of activities conducted up to fiscal 1991, (2) contents of associated aerospace projects, and (3) aeroengine components. In Field (1), the ground on which the project was created and the project's basic plans, goals, and systems, and its ripple effects are discussed, and the fruits produced so far are summarized. In Field (2), aeroengine component related projects of America, Britain, France, Germany, and Japan are investigated. In Field (3), aluminum alloys, titanium alloys, alloy steel, superalloys, intermetallic compounds, and intermetallic compound composite materials are discussed with attention paid to their current status and future trend, characteristics they are supposed to finally assume, and technical tasks to discharge for the development of technologies concerned. (NEDO)

Fiscal 1999 research report. Research on the long-term energy technology strategy (Basic research on the industrial technology strategy (Material technology field)); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This research clarifies the future social issues and targets of industrial technology in a material field including metal, inorganic, organic, polymer and fiber materials, and proposes the strategy for achieving such targets, based on research on changes in science and technology trend (technical innovation), and analysis on present and future industrial and technical competition powers. The future basic technologies for enhancing such competition powers are as follows: (1) Resource/energy-saving production process, (2) Design/evaluation technology for fine textures or in an atomic level, (3) Divergence toward high-purity and composite materials, (4) Improvement of a functionality, (5) Improvement of surface treatment technologies, and (6) Development of new materials and production technologies by using computer. The following 5 strategies are proposed based on the common understanding that the Japanese material industry achieves the best material technology innovation in the world by 2010: (1) Material technology strategy, (2) Strong cooperation among the industry, university and government, (3) Preparation of an intellectual base and a standardization strategy, (4) Reform of intellectual property rights, and (5) Resource strategy. (NEDO)

Fiscal 1991 research report. Research trend survey for next-generation industrial structure technology research and development project - Research and development of advanced materials for extreme environments; 1991 nendo jisedai sangyo kiban gijutsu kenkyu kaihatsu project ni kakawaru kenkyu doko chosa hokokusho. Chotaikankyosei senshin zairyo no kenkyu kaihatsu (sekitoku sekiyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-03-01

Efforts were exerted to develop intermetallic compounds and advanced C/C (carbon/carbon) composite materials usable under extreme environments such as high temperatures. In relation with advanced composite materials, especially with projects for developing composite materials using oil as raw material, a survey was conducted of the three fields of (1) summarization of activities conducted up to fiscal 1991, (2) contents of associated aerospace projects, and (3) oil based composite material technology. In Field (1), past achievements are summarized. In Field (2), aerospace projects under way across the world are broken down by airframe and engine, and are reviewed from the viewpoint of needs for materials. In Field (3), the present and future of heat resisting thermosetting composite materials, thermoplastic composite materials, and C/C composites are discussed. Characteristics such materials are supposed to finally assume and tasks to discharge for technical development are also taken up. (NEDO)

FY1999 report of the research results of medical/engineering cooperative research project, fundamental research on diagnosis/treatment systems by imaging higher order information of living systems; 1999 nendo igaku kogaku renkeigata jigyo koji seitai joho no gazoka ni yoru shindan chiryo system ni kansuru kiban kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The research and development efforts are made for the fundamental technology necessary for visualizing higher order information of the organs and tissues at high precision and non-invasively, and for supporting treatment of the malignant tumor and cerebrovascular diseases, while keeping the functions of the affected organs intact, and the FY 1999 results are reported. The program for the visualizing techniques includes designs of the pulse sequence for a 1H/13C-MRSI analyzer which observes proton and carbon by magnetic resonance spectrometric imaging (MRSI), and starts its programming. The program for the real-time analysis of tissue dynamics starts the designs of the coil for pelvis receiving the signals for monitoring dynamics of the abdominal organs at superhigh field. The program for systems for supporting treatment while keeping the functions of the affected organs intact starts development of the MR-matching heating system, for which the applications are designed, and measures against eddy current and resistance of the system as a whole to noise are studied. Development of the high-precision supersonic wave and far-infrared ray irradiation systems is started, in order to establish the treatment aided by radiant ray while keeping functions of the affected organs intact. (NEDO)

Report on the supplementary survey on the data processing in the FY 1997 survey of the promotion of geothermal development. Gravity filter analysis (No. B-6 Tsujino-dake area); 1997 nendo chinetsu kaihatsu sokushin chosa data shori ni kakawaru hosoku chosa (juryoku filter kaiseki) hokokusno. No.B-6 Tsujinodake chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-08-01

As a part of the FY 1997 survey of the promotion of geothermal development, the gravity filter analysis was made of the data processing in the Tsujino-dake area of Kagoshima prefecture, and the results were summarized. The geothermal fluid used in the Yamagawa geothermal power plant has the residual magma brought by activities of volcanic rocks of the Ata central shield volcano as heat source, and the fracture system and deep intrusive rocks are reservoirs. A small scale of gravity anomaly area is located, and it reflects high-density volcanic rock masses which are distributed on the earth surface or shallowly under the ground. The ridge stretching from Kiyomi-dake to the Narukawa tunnel and the ridge connecting Kuze-dake and Tsujino-dake are in the high-gravity area and reflect high-density rocks in the shallow part and deep part. There is a possibility of the existence of the fracture system in the high-density deep basement. Calderas continue close to the south of the high-gravity ridge stretching from the Kiyomi-dake to the Narukawa tunnel, and the fracture system which brings the eruption of volcanic rocks of the Ata central shield volcano and the fracture system forming caldera exist in parallel. From the aspect of the geothermal structure, a consideration was made of rock layers which possibly compose the rise of high-density basement in the deep part near the Tsujino-dake. (NEDO)

FY 2000 report on the survey of the project to promote and support the formation of the environmentally friendly energy community. Feasibility study on the waste utilization high efficiency power generation project; Kankyo chowagata energy community keisei sokushin jigyo chosa hokokusho. Haikibutsu riyo kokoritsu hatsuden jigyo ni kakawaru FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

An investigational study was conducted on energy recovery (power generation) in disposal of industrial waste. The capacity of power generation facilities in incineration processing of industrial waste reached approximately 200,000kW (50 facilities) in the total nationwide. The incineration-processed waste is mainly chips of wood, waste tire and bagasse. Almost all the electric power is for non-utility use, and there are no examples of selling it outside. In the metropolitan area, there is only one example of the industrial waste incineration power generation in Tochigi prefecture. This is because there are extremely very few enterprises which are sources producing the waste as target. However, if the industrial waste market is targeted, there is a future. The industrial waste has a lot of disadvantages as power generation use fuel because of its diversification, but the use of it as fuel is technically easier than the use of the general waste as RDF. Accordingly, it can be used for power generation with no need of special technology or facilities. When picking up facilities with a potentiality of high efficiency power generation from the existing incinerators in operation of persons in charge of industrial waste processing, approximately 125,000 kW can be obtained only from remodeling of the existing facilities. (NEDO)

Survey for development feasibility in fiscal 1999 investigation of geothermal development and promotion. Evaluation report on practicability technology survey SWD method (Evaluation report concerning verification test); 1999 nendo chinetsu kaihatsu sokushin chosa no uchi kaihatsu kanosei chosa. Jitsuyoka gijutsu chosa SWD ho hyoka hokokusho (jissho shiken ni kakawaru hyoka hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

An evaluation test was conducted on SWD (Seismic While Drilling) method as a part of the investigation of geothermal development and promotion. The test was implemented at the time of drilling of N11-MD-3 well in the northeast base area of Busadake, Hokkaido. The test items were such as verification of direct waves propagating from a bit to the surface, identification of signals passing through a fault zone using direct waves and reflected waves, estimation of distance between a fault and a bent zone, and grasping the direction of signal propagation at the time of inclined drilling. As a result of the experiments and studies, following conclusions were obtained. Reflected waves extracted are not necessarily limited to those from a reflection area from which the shape of a fault can be grasped; unless there is a clear reflection area that can be picked up on the surface near a fault, the application of this method is not effective. In an analysis using direct waves, it was possible to obtain an inclined angle of a fault plane from the estimation of velocity structure, propagation route, and assumption of the shape of the fault plane and, therefore, to grasp the shape of the fault. Obtaining reference data is essential for identifying bit signals. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy (Textile technology field)); 1999 nendo choki energy gijutsu senryku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sen'i gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a textile technology field. Social demand and constraint in the 21st century restrict human life and industrial activity, however, include huge business chances. This technology strategy aims at construction of textile business contributing to the society, and improvement of the international competitiveness of Japanese textile industry. Analysis was made on the current international competitiveness of the textile industry in comparison between Japanese and American productivity. As factors hindering technological innovation, the following were pointed out: poor cooperation among industry, academia and government, poor cooperation among different kinds of industries, poor preparation of basic technology, knowledge base and creation base, and poor deregulation. As the future target and strategy, 7 technology targets, 2 creation targets, and every target year were showed. 4 proposals were also showed as follows: preparation of a technology base, creation base, talent education and knowledge base, and protection of intellectual property rights. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Iron and steel technology field; 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) (tekko gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a steel technology field. Japanese steel industry should correspond to requirements of the international economic society as the top runner. Although it is now difficult to suppose a basic technology innovation, stable supply of basic materials is necessary for peripheral industries. The basic raw material technology is the basis of domestic and overseas socio- economic activities. The technology development support system to retain the world-wide leadership of Japanese industries is a strategic issue. Preparation of cooperative R and D bases of industry, academia and government along a national policy is important. Strong promotion of such national projects is also essential as global environment problem, positive use of advanced information tools, development of technologies and products of unexplored fields, and development of new products and demand creation according to social needs. Such measures along social requirements are also important as raw material development to double an energy efficiency, and the policy and system to construct a recycling society and living spaces. (NEDO)

FY2000 report of the research results of medical/engineering cooperative research project, fundamental research on diagnosis/treatment systems by imaging higher order information of living systems; 2000 nendo igaku kogaku renkeigata kenkyu jigyo koji seitai joho no gazoka ni yoru shindan chiryo system ni kansuru kiban kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The research and development efforts are made for the fundamental technology necessary for visualizing higher order information of the physiological functions of the organs and tissues at high precision and non-invasively, and for supporting treatment of the malignant tumor and cerebrovascular diseases, while keeping the functions of the affected organs intact, and the FY 2000 results are reported. The program for the visualizing techniques includes development of the pulse sequence for commercializing the proton and carbon magnetic resonance spectrometric imaging (MRSI), and development of the prototype 1H/13C-detecting circuit. The program for the real-time analysis of tissue dynamics includes production of cine-images of, e.g., the peristalsis of the uterus, to accumulate the basic data for monitoring dynamics of the abdominal organs. The program for systems for supporting treatment while keeping the functions of the affected organs intact includes the MR-aided temperature-sensing systems, and improvement of the techniques for correcting motion of the measured organs by extracting characteristic points in the images taken and of MR-aided temperature sensing accuracy. The program for radiotherapy and ultrasonic therapy of malignant tumors in the body stems includes development of high-accuracy irradiation system aided by real-time three-dimensional body motion monitoring system. (NEDO)

Report on achievements in fiscal 1999 on the project for research and development of an intellectual base creating and utilizing technology. Research and development of standard substances related to polymers; 1999 nendo chiteki kiban sosei riyo gijutsu kenkyu kaihatsu jigyo gyomu seika hokokusho. Kobunshi ni kansuru hyojun busshitsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the achievements in fiscal 1999 on researching and developing standard substances related to polymers. Investigations were performed on polystyrene with average molecular weights of 300 to 2,000 being the standard polymeric substance as the primary subject, and polycarbonate with molecular weight of about 300,000 as the secondary subject. Development was executed on the fundamental technologies related to chromatographic conditions for separation to acquire polymers without molecular weight distribution or with very little distribution (single dispersion), and sampling conditions for the sampling chromatography. Uniform polymers were used as the primary calibration standard substance to have developed the fundamental method and the fundamental conditions to value exactly the average molecular weight values such as in the single dispersion test. Polyvinyl chloride (PVC) was taken up as the valuing material as a polymeric material with less secular change being the indispensable element as the standard substance, and capable of being stably supplied. Round robin tests were performed by 16 testing organizations on the tensile elasticity specified in ISO10350 in accordance with the international standard guide 35 to have valued the standard substances. Variance in property values of PVC sheets was analyzed, and the standard deviation was verified. (NEDO)

FY 2000 report on the results of the infrastructure construction project for spreading high-efficiency fuel cell systems/development of test apparatuses for evaluation of fuel cell systems for automobiles; 2000 nendo kokoritsu nenryo denchi system kiban gijutsu kaihatsu / jidoshayo nenryo denchi system hyoka shiken sochi no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This project studies the testing/evaluation methods for spreading fuel cells for automobiles. Described herein are the FY 2000 results. The problems involved in evaluation of the single cell units are classified into those involved in the cell construction and methods of evaluating the operation performances of the single cell units. These problems are analyzed mainly by literature survey. The mode simulation tests will be greatly simplified, if the system can be tested on the bench without being actually boarded on the vehicle. Therefore, this project is aimed at development of a comprehensive mode simulator which can be automatically operated corresponding to the running modes of various countries, to test the performance of FCEV and to examine the effects of each component independently on the vehicle performance. The factors required to reproduce the actual driving states of an FCEV on the bench are analyzed, and the conceptual designs are drawn for the controlling algorithms. It is necessary to standardize the stack and reformer testing methods, in order to evaluate the fuel cell system components. For these objects, the prototype units are constructed to evaluate 10kW direct hydrogen type stacks and 5kW methanol reformers. The units are also constructed to evaluate the high-pressure (1MPa) reformer reactors and hydrogen separation membrane systems. (NEDO)

Exploration of underground basement structures in Kanto plain using the spatial autocorrelation method. 1. S-wave velocity structure along the line from Hatoyama, Saitama to Noda, Chiba; Kukan jiko sokanho ni yoru Kanto heiya no kiban kozo tansa. 1. Saitamaken Hatoyama machi - Chibaken Nodashi kan no S ha sokudo kozo

Energy Technology Data Exchange (ETDEWEB)

Matsuoka, T; Umezawa, N; Shiraishi, H [Saitama Institute of Environmental Pollution, Saitama (Japan)

1997-05-27

The Saitama prefectural government has been conducting basement structure exploration using the spatial autocorrelation method by dividing the entire plain area into meshes, for the purpose of improving the accuracy of estimating large-scale seismic damages. This paper reports the result of explorations on meshes in the east-west direction in the central part of Saitama Prefecture. The present exploration was intended on ten meshes in the east-west direction along the north latitude 36-degree line. The number of exploration points is 13 comprising three points on the hilly area bordering on the eastern edge of the Kanto mountainous area and ten points on the plain area. The arrangement constitutes a traverse line with a total distance of about 33 km from the west edge (Hatoyama-machi in Saitama Prefecture) to the east edge (Noda City in Chiba Prefecture). The phase velocities were estimated from the result of the array microtremor observations using the spatial autocorrelation method applied with the FET. The phase velocities were used to estimate underground structures by using an inverse analysis. As a result, detailed two-dimensional S-wave velocity structures were revealed on the traverse line. The velocity cross section expresses change in the basement structures with sufficient resolution, and at the same time the information is judged highly harmonious with existing deep boring data and the result of artificial earthquake exploration. 15 refs., 6 figs.

Applicability of the spatial autocorrection method for estimation of basement structure in Kanto plain. Array measurements of microtremors close to the Iwatsuki and Shimosa deep borehole observatory; Kanto heiya no kiban kozo suitei no tame no kukan jiko sokanho no tekiyosei. Iwatsuki Shimosa jiban katsudo kansokusei ni okeru array bido kansoku

Energy Technology Data Exchange (ETDEWEB)

Matsuoka, T; Umezawa, N; Shiraishi, H [Saitama Institute of Environmental Pollution, Saitama (Japan)

1996-10-01

To investigate applicability of the spatial autocorrection method which is a microtremors exploration method for the estimation of basement structure, array measurements of microtremors were performed using the Iwatsuki and Shimosa deep borehole observatory where detailed structures were clarified as well as the Fuchu and Koto deep borehole observatory. In this study, estimated velocity structures of S-wave were compared with the geological sequence and results of acoustic velocity logging. The phase velocity was estimated by the spatial autocorrection method using FFT. The phase velocity with a smooth normal dispersion was observed in the periodic range from 0.5 to 5 sec in Iwatsuki, and from 0.5 to 4 sec in Shimosa by the combination of four-point circular arrays with radii of 100, 300, and 600 m. The underground structures estimated from the phase velocities coincided well with the geological sequence, and results of acoustic velocity logging and velocity logging for each borehole. For the Iwatsuki borehole, the basement velocity was also estimated properly in the periodic range of observation. While, for the Shimosa borehole, measurements with the period around 6 sec were required to estimate the basement velocity more accurately. 13 refs., 11 figs., 1 tab.

Achievement report for fiscal 1981 on Sunshine Program research and development. Research and development of amorphous solar cells (Research and development of amorphous solar cells on flexible film substrates); 1981 nendo amorphous taiyo denchi no kenkyu kaihatsu seika hokokusho. Kadosei film wo kiban to suru amorphous taiyo denchi no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-31

Efforts will be made to reduce the cost, increase efficiency, and enlarge cell areas and, at the same time, to establish the foundation of a roll-up type solar cell manufacturing process which is required for the implementation of mass production. In an inverted pin/ITO (indium-tin oxide) hetero-face structure cell installed on a polymer film substrate, a conversion efficiency of 5.33% is achieved in the case of a solar cell whose n-layer is of the amorphous phase, and 6.36% in the case of a cell of the microcrystallized phase. A roll-up type glow discharge CVD (chemical vapor deposition) unit is designed and experimentally built, which is for the realization of large area cells. It is now duly expected that an undoped (i-type) a-Si:H film will be deposited to a thickness of approximately 5000A. As the result of a first-step screening conducted in search of amorphous solar cell sealing materials, some applicable plastic materials are selected. The future is bright of amorphous solar cells on polymer film substrates. (NEDO)

Report on results for fiscal 1997 on development of coal liquefaction technology . Development of liquefaction base technology (studies on development and internationalization of environmentally benign coal liquefaction technology); 1997 nendo sekitan ekika gijutsu seika hokokusho. Ekika kiban gijutsu no kaihatsu (kankyo chowagata sekitan ekika gijutsu no kaihatsu oyobi kokusaika kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The research objective is the development of environmentally benign coal liquefaction technology and the studies on internationalization of coal liquefaction technology. Implemented for the former are (1) research on improvement and rationalization of liquefaction process and (2) research on advancement of liquefaction base technology. In (1), studies were made on in-oil preprocessing technology and scale suppressing measures for the purpose of obtaining reform/high grade of coal, and on improvement of liquefied oil collecting ratio, sophistication of coal slurry and attainment of light oil/high grade from liquefied crude oil for the purpose of optimizing liquefaction reactive conditions and improving a solvent. In (2), in developing high activity/high dispersion type new catalysts, catalytic sufurization behavior and activity manifestation mechanism were explored, as were iron hydroxide based iron ore properties and liquefaction reactive characteristics. The initial reactive characteristics of liquefaction for example were investigated for the purpose of collecting basic data for expanding kinds of coal. In order to attain the latter objective of the research, a feasibility study of liquefaction location was conducted, as were the investigation including sampling of iron ore for catalytic material and the investigation of coal gasification technology. After the completion of the Australian brown coal liquefaction project, the development of the coal liquefaction technology commenced in fiscal 1994 produced a number of useful records and ended in 1997. (NEDO)

Report on fiscal 1998 investigation of geothermal development and promotion and on supplementary investigation concerning data processing (geology/decomposed zone investigation and gravitational probing). No. B-7 Kuwanosawa area; 1998 nendo chinetsu kaihatsu sokushin chosa. Data shori ni kakawaru hosoku chosa (chishitsu henshitsutai chosa oyobi juryoku tansa) hokokusho (No.B-7 Kuwanosawa chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-09-30

A geology/alteration zone investigation and gravitational probing were carried out, with the results summarized, for the purpose of elucidating the structure of geothermal reservoir structure in the Kuwanosawa area. The investigation was implemented in the southeast part of Akita prefecture including Yuzawa city and Ogachimachi during the period between June 9 and August 31, 1999. The results were as follows. The geology of the investigation area consists of granite, as the base rock, and the covering Doroyu layer, Minasegawa layer, Sanzugawa layer and intrusive rocks in the Neo Tertiary system as well as Kabutosan layer and volcanic rocks in the Quaternary system. No wide area alteration zone existed, while vein-like alterations and hydrothermal veins along cracks were recognized, with the fluid inclusion homogenizing temperature showing 240-260 degrees C, which presumably indicates the existence of local hydrothermal activity until comparatively recently. The geothermal structure of the subject area is very likely dependent on thermal conduction from a deep thermal source existing in the Wasabizawa district. In the underground depth, it is inferred that a hydrothermal system is formed in the NW fault structure, lower part of cracks accompanying NS hydrothermal vein, and in the NNW/NE structures inferable from the gravitational probing. (NEDO)

Survey of selecting the promising drilling points out of the ground survey of the FY 1992 geothermal development promotion survey. Soil gas survey (No.C-1 - Shirotori area); 1992 nendo chinetsu kaihatsu sokushin chosa. Chijo chosa no uchi yubo kussaku chiten sentei chosa (Dojo gas chosa) hokokusho (No. C-1 Shirotori chiiki)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

As a part of the survey of selecting promising drilling points, survey was made using soil gas to grasp the area of existence of geothermal fluid in the area for careful examination and the locational distribution of fractures controlling the behavior of fluid. In the survey, the concentration of Hg in soil gas/carbon isotopic ratio of CO2 were measured at 247 measuring points. Generally speaking, there existed the hydrothermal fluid along the structure controlling geothermal activities in the area where the concentration of Hg in soil gas is high, and the volcanic gas as a heating source of geothermal fluid was rising in the area where the carbon isotopic ratio is high. In the survey, areas where both the Hg concentration and the carbon isotopic ratio were high were extracted as promising areas where the high temperature geothermal fluid possibly exists. The promising areas extracted were the periphery of the Daiichi (No.1) Shirotori Hot Spring, periphery of KT-4, southern periphery of N4-ST-2, periphery of 54E-OBN-1 - 54E-OBN-2, and periphery of N4-ST-2. Besides, a possibility of existence of geothermal fluid was indicated in the northeast of N4-ST-1 and in the northeast of KT-9. (NEDO)

FY 1999 Project of information exchange by researchers on environmental problems in the Asia-Pacific region. Report on investigations for establishing Environmental Technology Research Network in the Asia-Pacific Region; 1999 nendo Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho. Asia/Taiheiyo chiiki kankyo gijutsu kenkyu kaihtsu network kochiku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Described herein are the results of the FY 1999 activities for the project of information exchange by researchers on environmental problems in the Asia-Pacific region. In 1999, the 6th International Workshop was held in City of Yokkaichi, Mie Pref., with the theme (Implementation of international collaborative researches on environmental technology) at International Center for Environmental Technology Transfer, with a total of more than 50 domestic and foreign attendees actively participating in the discussion. The keynote addresses were (Use of coal and environmental improvements) presented by Mr. Yoshisada Nitta, Director at Central Research Institute of Electric Power Industry, and (Potential of clean fuel from biomass) presented by Dr. Kyu-Wan Lee of Korea Research Institute of Chemical Technology. The overseas surveys were conducted to promote the use and registration of the databases, and to identify problems by the on-the-spot investigations in Vietnam, the Philippines and Republic of Korea. At the same time, the mini-workshops were held for information exchange with the research institutes. It is keenly felt that Environmental Technology Research Network in the Asia-Pacific Region (ENTERNET-APR) works certainly in various areas, with the attendees in the last workshops serving as the key persons. (NEDO)

Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium research and development in its 3rd year (Development of technology for treating aquatic environments using microorganisms fixed carbon fibers--Abbreviation: Carbon/aquatic environment project); 1999 nendo tanso sen'i nansoshiki eno biseibutsu kochaku gensho wo riyoshita mizukankyo seibi gijutsu no kaihatsu (ryakusho: tanso mizukankyo project) seika hokokusho. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A carbon fiber has been developed, which is easy to fabricate and allows microorganisms to anchor on. For its application to purify water, the fiber should be formed into an umbrella-type fringe and used in water featuring BOD (biological oxygen demand): 5-600ppm and chlorophyll-a: 80{mu}g/L or less and flowing at an appropriate speed. Communities of microbes speedily anchor themselves in large quantities on the carbon fiber fringe, and they are difficult to remove and highly active. Inside the anchored groups, there exist, in addition to aerobic microbial phases, anaerobic microbial phases occupying 40%. In an appropriate flow the microbial communities on the fringe perform a kind of pumping motion and exhibits a great mass transfer velocity. Carboniphilic bacteria exert a great influence during the initial stage of the anchoring process. Various woven carbon fiber products are used as artificial waterweeds and provide spawning grounds which are favored by fishes. The carbon fiber products may have some attractive trait which invites them. The characteristics of the anchored microbial communities are determined by synergism between the physical/chemical peculiarities of the carbon fiber and the nature of carbon favorable toward living organisms. Principles to follow in the use of carbon fiber products are mentioned. (NEDO)

Fiscal 1997 achievement report on international standard creation type research and development. Key technology for color image management (Research and development project on standard data for diversification of international information interchange); 1997 nendo color gazo management kiban gijutsu seika hokokusho. Kokusaiteki joho kokan no tayoka ni muketa hyojun data no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Activities were conducted for (1) proposing that some items in software comply with a standard format to be commonly used by plural personal computer programs in the field of the key technology of color image management and for (2) placing before ISO (International Organization for Standardization) a standardization proposal and a standard format proposal involving characters and character baselines in the field of research and development of standard data for diversification of international information interchange. Under Item (1), submission of a proposal was adjourned because the standard of color expression in Asian countries was insufficient and involved many problems requiring careful attention. The problems were whether the color names were suitable for the users, that the color names other than those specified by JIS (Japanese Industrial Standard) Z8102 were equivocal and needed proper notations, and whether color names to use with displays or the like were to be defined independently from JIS. Under Item (2), the problem of metric information standardization surfaced because it was supposed that mixing JIS fonts with other countries' fonts would give rise to problems. As for the character size, it is 10 points, more or less, in all the countries and therefore it does not make difficult the exchange of information under the Web environments. The results will be reported and explained to the departments concerned and to the Asian countries. (NEDO)

Achievement report for fiscal 1981 Sunshine Program on development of practical application technologies for photovoltaic power systems. Test production and verification of solar panels (Development of polycrystalline substrate process technologies); 1981 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo denchi panel jikken seisaku kensho (takessho kiban kotei no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Studies are conducted to enlarge the diameter of polycrystalline Si castings and to develop a low-loss slicing method using silicon nitride powder as mold releasing agent. The apparatus for Czochralski's pulling process is improved and tested using SEG (selective epitaxial growth) Si, and now the casting of a 150mm-diameter ingot is feasible. Also, test production of a 94mm-square wafer as specified by NEDO (New Energy and Industrial Technology Development Organization) is successfully carried out. Difficulties in separating the mold releasing agent from the crucible are solved by changing the Si{sub 3}N{sub 4} power solution from PVA (polyvinyl alcohol) to ethyl silicate. The design, manufacture, and installation of the important parts of the system for the mass production of castings are now complete. The crucible is designed to be movable relative to the heater section, and the molten Si is allowed to cool and solidify from the bottom upward. In relation with the development of low-cost wafer manufacturing technologies, low-loss slicing methods are studied. It is concluded that under the current circumstances a multi-blade saw is more promising than the multi-wire saw in view of the damaged slice rate, processing speed, operating cost, and maintainability. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Aerospace technology field (Aircraft technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (kokuki gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of an aircraft technology field. In an aircraft field, since the major theme is application of new technologies to new airframe development, with joining in international cooperative development of aircraft, Japanese initiative development of airframes based on the domestic market demands and profitability should be started as early as possible. Because there is no airframe development by only one country including U.S.A., Japan is profitable to unite with some overseas companies, and invest selectively in specific leading fields. Positive technical support to safety, reliability, comfort and environment harmony are also important. More important theme than establishment of elementary technologies is preparation of an integrated flight demonstration system to expand application chances of development results, and preparation of various test facilities for tests required during development activities. Application of information technologies to the whole aircraft industry, and organic cooperation between the private and public sectors are also important. (NEDO)

Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Research on actualities of Japanese industries' research and development potential); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (Nippon kigyo no kenkyu kaihatsuryoku no jittai ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For working out propositions on what the country should do and on what improvement industries should make for the strengthening of industries' competitive power on the market, analyses were conducted into the objects of research and development, organizations engaged in research and development activities, methods of evaluation, and the like. In concrete terms, studies were made on industries' roles in research and development activities and on the actualities of basic research and development potential, and then a survey was conducted through questionnaires and interviews about (1) tasks relating to corporation management and research and development potential, (2) development of research dedicated talent and its fluidity, and (3) problems feared to get worse in the future. Questionnaires were sent to 217 corporations or 577 people of whom 37.6% responded. Each item is described below. Under item (1), it is pointed out that basic research has shrunk as a whole, that pressure is on the increase urging that research directly increase profit, and that theme selection is made to match the business model. Under item (2), it is stated that post-doctorate researchers' knowledge is respected but that recruitment is another matter, and that fluidity of researchers between corporations will increase. Under item (3), it is pointed out that researchers are increasingly inferior in quality and that brain drain out of Japan is feared. (NEDO)

Report on the FY 1998 results of the New Sunshine Project (B version). Development of coal liquefaction technology (Development of base technology of liquefaction (Project on internationalization of coal liquefaction technology)); 1998 nendo sekitan ekika gijutsu kaihatsu seika hokokusho (B ban). Ekika kiban gijutsu no kaihatsu (sekitan ekika gijutsu no kokusaika jigyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In 1994, a memorandum on the research cooperation was agreed between NEDO and BPPT (The Agency for the Assessment and Application Technology) in Indonesia, based on the request for the coal liquefaction technology cooperation from BPPT. It includes the following items: conference for professionals to be held, invitation and training of Indonesian engineers, activity for joint field survey and potential survey of location of coal liquefaction commercial plant. Further in 1997, the secondary memorandum was concluded for the potential survey for securing the hydrogen required for coal liquefaction by coal gasification. The survey was summarized as the potential survey for location of coal liquefaction. In the testing study for improving economical efficiency of liquefaction process, it was made clear that the higher the Fe content of Banko coal is, the higher the reaction of liquefaction is, and that Fe compounds in coal show catalysis. In the Soroako area in Sulawesi island, there are the nickel mine run by PT. Inco. Soroako limonite is promising as catalyst material for commercial-scale coal liquefaction. In the gasification method, the plant construction cost increases, but the production amount of coal-derived liquid can be increased. That is more profitable than the production of hydrogen from natural gas. (NEDO)

Fiscal 1997 achievement report on international standard creation type research and development. Key technology for color image management (Research and development project on standard data for diversification of international information interchange); 1997 nendo color gazo management kiban gijutsu seika hokokusho. Kokusaiteki joho kokan no tayoka ni muketa hyojun data no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Activities were conducted for (1) proposing that some items in software comply with a standard format to be commonly used by plural personal computer programs in the field of the key technology of color image management and for (2) placing before ISO (International Organization for Standardization) a standardization proposal and a standard format proposal involving characters and character baselines in the field of research and development of standard data for diversification of international information interchange. Under Item (1), submission of a proposal was adjourned because the standard of color expression in Asian countries was insufficient and involved many problems requiring careful attention. The problems were whether the color names were suitable for the users, that the color names other than those specified by JIS (Japanese Industrial Standard) Z8102 were equivocal and needed proper notations, and whether color names to use with displays or the like were to be defined independently from JIS. Under Item (2), the problem of metric information standardization surfaced because it was supposed that mixing JIS fonts with other countries' fonts would give rise to problems. As for the character size, it is 10 points, more or less, in all the countries and therefore it does not make difficult the exchange of information under the Web environments. The results will be reported and explained to the departments concerned and to the Asian countries. (NEDO)

Fiscal 2000 achievement report. Development of energy use rationalization-oriented silicon manufacturing process (Development of silicon substrate manufacturing technology for high-quality solar cell); 2000 nendo shin energy sangyo gijutsu sogo kaihatsu kiko kyodo kenkyu gyomu seika hokokusho. Energy shiyo gorika silicon seizo process kaihatsu (Kohinshitsu taiyodenchiyou silicon kiban seizo gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted for enhancing productivity and energy conservation by rendering continuous and automatic the electromagnetic casting process for manufacturing polycrystalline silicon substrates for solar cells. In the manufacture of ingots for substrates by continuous electromagnetic casting, the chuck type system for feeding power to the melt plasma was replaced by a roller type system, and the power feeding position was moved to the high temperature region. Also, an on-line ingot slicing technique was established. In the manufacture of substrates at a slicing rate of 300 {mu}m/minute, productivity of 115,000 wafers/month, yield of 98%, and thickness tolerance of 30 {mu}m were achieved. A high-speed cleaning technique was developed using a jet stream, by which the cleaning time was reduced to 5 minutes and the slurry recovery rate was elevated to 95%. Based on these, substrate-related costs in the case of 100 MW/year production was calculated, which resulted in a cost of 98.8 yen/wafer (target: 103.3 yen/wafer) for manufacturing 15 cm square substrates from ingots and in a 15 cm square substrate slicing and cleaning cost of 135.1 yen/wafer (target: 135.4 yen/wafer). (NEDO)

Fiscal 2000 survey report. High-efficiency energy system introduction promotion project for houses and structures - Houses (Technical classification tables prepared by analysis of proposed systems, and comments on the same); 2000 nendo jutaku kenchikubutsu kokoritsu energy system donyu sokushin jigyo (jutaku ni kakawaru mono) teian system no bunseki ni yoru gijutsu bunruihyo oyobi dokaisetsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As an energy conservation promotion measure, a project is under development for introducing and subsidizing high-efficiency energy systems and for letting their effect known publicly and widely. The number of proposed energy systems has increased greatly and technical divisions to follow in classifying them have become vague, from which problems are now arising over the execution of follow-up checks and the maintenance of fair treatment. In the effort to solve this problem, 376 propositions are analyzed and classified, a technical classification method is proposed, and an instruction manual on the method is compiled. The classification involves (1) proposed classification, (2) variation, (3) energy reduction rate, and (4) tentatively calculated cost. Item (1) deals with the basic classification (air-conditioning, ventilation, and hot water supply, and, to be considered in combination with them, options which are cooking, illumination, and others) and, item (2) covers eight items such as new/old construction, structure, and structural frame. In Chapter 1 of the report, the 376 propositions are put in order according to common classification items and an original classification table is prepared. In Chapter 2, the goals are clarified and the classification principles are defined. In Chapter 3, the classification is checked for its validity and some realistic ways of grouping are described. In Chapter 4, a classification implementation flow chart is shown. (NEDO)

`Joint Research and Development of Industrial Technology,` an international research collaboration for fiscal 1997. Utilization of 3D-woven C/C composite materials to machine components; 1997 nendo kokusai kenkyu kyoryoku jigyo `sangyo kiban gijutsu kyodo kenkyu kaihatsu`. Sanjigen ori C/C composite zairyo no kikai buhin eno oyo ni kansuru kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A polygonal mirror in a printer and the main shaft of a high-speed milling machine are used as models for the development of technology for applying C/C (carbon/carbon) composite materials to machine components that are required to turn at high speeds. Various C/C composites are tested for flexural strength and thermal expansion for the designing and manufacturing of C/C composites for the polygonal mirror and main shaft. The first coating on the C/C composite is deposited by laser/plasma hybrid spraying, and is a Mo coating. A spraying robot is experimentally built for homogeneous coating. In the case of polygonal mirror, an Al coating is deposited further by the gas-deposition method. The polygonal mirror proves excellent in both dimension and reflectance, and attains the target speed of 45,000rpm. In the case of milling machine main shaft, however, it is not strong enough to withstand 40,000rpm although it is a success from a viewpoint of coating technology and manufacturing technology. 15 refs., 33 figs., 13 tabs.

FY 2000 report on the survey on the long-term energy technology strategy. Fundamental survey to work out industrial technology strategies (technology strategy by field - material technology field); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of constructing the material technology strategy, conducted were study of the trend of technical development, arrangement of material technology seeds, and survey of the R and D environment. Concretely, the paper carried out the grasp of the national projects related to materials in Europe and the U.S., patent registration (U.S.-Japan comparison)/application (Europe/Japan), transfer of technology trade, and survey of the trend of papers made public in scientific magazines. Further, in the survey of the R and D environment, conducted were how to treat researchers/engineers, how to handle intellectual ownership, system to promote the cooperation among industry/university/government, and comparison among countries in policies of technology such as patent strategy. The results of the survey were classified into the following 4 items: 1) trend of the technical development in the material technology field; 2) developmental environment in the material technology field; 3) competitive force in the material field and material user needs/seeds maps; 4) proposal for the material technology strategy. As to the competitive force of material technology in 3), the paper took up organic/polymer, iron/steel, aluminum, semiconductor, and ceramic materials. (NEDO)

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field (formed raw material field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sokeizai bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the formed raw material field in relation to the FY 1999 long-term energy technology strategy. In the advancing international specialization, efforts are being made for the secure basic base technology force and cost reduction required for competition, and at the same time the aim is not to retain/improve all the formed raw material technologies, but to discriminate the materials in the aspects except the cost. By promoting the reformation into the proposed type industry, it is necessary to work out the bold strategy including the review of the system/structure for promoting the strategic technology innovation by aiming at the important formed raw material technology which can be a life line for the assembly industry, in particular. Concretely, the comprehensive technology system which concentrated a variety of engineering knowledge/information was constructed. The system is shifted to the one that adopted information/communication technology. The conversion in the early time to the proposed type industry is attempted. Japan acquires capability for heightening the level of technology, by which Japan will continue leading the formed raw material technology to the world's top level. Japan realizes the network consisting of the industry, university and government. The environment is realized where new personnel will naturally enter the formed raw material industry and bottom up the total technology force. (NEDO)

Survey report for fiscal 1999 on foundation of strategy formation for industrial technologies. High-priority strategy (Construction of society of citizens giving full play to their ability, construction of society with safety and comfort); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Jutenka senryaku (kojin noryoku hakki no shakai kochiku anshin anzenna shakai kochiku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Concrete methods of technology-related strategy construction were studied, and a prototype was built. Proposed as a basic concept was a method to follow the steps of the grasping of people's needs, mapping of people's needs, translation of people's needs into technological tasks, and finally the matching of technological tasks and technological seeds. Questionnaires were conducted and it was learned that safety and comfort, computerization, environment, and energy were the needs, and then they were set as the major targets. In this study, a process was taken up in which safety and comfort and computerization develop into technological tasks. A study was made of people's needs on a needs matrix, and intermediate targets in the field of safety and comfort were established. They are the 'building of an environment in which everyone is independent and a participant in social activities,' the 'construction of a safe and comfortable life,' and the 'sustenance and enhancement of good health.' Intermediate targets set for the field of computerization are an 'efficient electric government and administration,' 'information disclosure and distribution on the global scale,' and the 'maintenance of peace and order in the cyberspace.' (NEDO)

Achievement report for fiscal 1999 on development of 'technology to promote reduction of discharge of dioxins and development of technology to suppress discharge of dioxins in aluminum product manufacturing processes'; 1999 nendo dioxine rui haishutsu sakugen sokushin gijutsu kaihatsu seika hokokusho. Aluminium seihin seizo kotei ni okeru dioxin rui no haishutsu yokusei seigyo no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development has been performed with an objective to reduce discharge of dioxins in aluminum product manufacturing processes. With regard to the quantity of chlorine used in aluminum molten metal refining process, the refining tests using 100% chlorine gas and the mixed gas (nitrogen gas mixed at 80%) revealed that either gas has approximately the same degassing performance, and the use of the mixed gas can reduce the amount of chlorine used. Dioxin concentrations in the gas discharged from the refining process were measured under the refining condition using less amount of chlorine. As a result, it was verified that, in the case of using 20% chlorine gas plus 80% nitrogen gas, the concentrations of dioxins decrease to about l/6, or 0.6 ng-TEQ/N{sup 3}. The studies on suppressing the discharge of dioxins from the facility to wash chlorine treatment exhaust gas discovered that dioxin concentration in the scrubber circulating solution can be suppressed to 1/10 or less by means of gravity precipitation and separation of the suspended liquid. It was also made clear that pH should preferably be controlled to 10.5 to separate suspended substances from the precipitated solution. (NEDO)

Report on a project to support promotion of forming an environmentally friendly energy community. Survey on an environmentally friendly community business by means of high-efficiency wastes power generation system in the Toyota-Kamo wide area; Kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokusho. Toyota Kamo koikiken kokoritsu haikibutsu hatsuden kankyo chowagata energy community jigyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Taking the Toyota-Kamo wide area as the object, wastes power generation is positioned over the society system as worked on by administrations and operators integrally to incinerate mixedly those incineratable materials such as plastics among general and industrial combustible wastes for high-efficiency generation of power, which is supplied to electric utility operators as surplus power. Discussions were given on the business feasibility and the effectiveness as a society system. In this area, the mixed model B plan (dealing with general wastes plus industrial wastes) was evaluated as an effective plan as the society system. This is because the plan has effect to incinerate, melt and generate power from industrial wastes which have been used for land-fill, effect of improving the power generation efficiency, and effectiveness of mixed treatment with general wastes. The plan A in which general wastes are made into RDF, then incinerated mixedly with industrial wastes for power generation was evaluated to have high reliability potential of power supply and to be an effective plan as a society system, if effect can be expected to reduce transportation energy as a result of making the system large enough and turning wastes into RDF. (NEDO)

FY 1999 Report on research and development of energy utilization rationalization superhigh-technological liquid crystal technologies. Superhigh-technological electronic technology development promotion project for new functional electronic material design, control and analysis technologies; 1999 nendo energy shiyo gorika chosentan ekisho gijutsu kaihatsu seika hokokusho. Chosentan denshi gijutsu kaihatsu sokushin jigyo shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-04-01

Described herein are the FY 1999 results of the liquid crystal technology development project. For the researches on multi-layer reflection, composite panels of flattened resins of different refractive index are developed to improve 2-layer monochromic contrast ratio. The guest/host liquid crystal compositions of high orientation order are investigated as the those useful for high contrast. Compounds are pursued for superanisotropic light absorption, and modification with a substituent is found to be effective. Molecular orientation controlling is also studied. For researches on memory-sustaining type liquid crystals, the studied items include formation of thin ferroelectric films on glass substrates, improvement of voltage-sustaining characteristics by composites (including compounds), and doping of trace quantities of ionic impurities. For development of image element colors, the studied items include multi-lattice-structured, oriented HPDLC devices, composites of high birefringence (high order light scattering), and light interference, high order light scattering type light control devices. The multi-dimensionally anisotropic structure of configuration divided into 3 parts of R, G and B is developed to create directive reflection which improves brightness of the reflection type color liquid crystal. A group of compounds are pursued to develop liquid crystal compositions of high refractive index anisotropy, and promising ones are found. The results of the comprehensive investigations are also described. (NEDO)

Fiscal 1999 technical survey report. Basic project on international cooperation on energy consumption improvement, etc. (Japan International Cooperation Center project on promotion of exchange of specialists); 1999 nendo kokusai energy shohi koritsuka nado kyoryoku kiso jigyo / kokusai energy shohi koritsuka chosa nado kyoryoku kiso jigyo chosa hokokusho. Kokusai kyoryoku center jigyo suishin senmonka koryu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

Specialist related to the governments of Thailand, Malaysia, and Indonesia where NEDO (New Energy and Industrial Technology Development Organization) implements its model projects were invited. They exchanged opinions with officials of the Japanese Government and affiliated organizations over measures for effective energy utilization. Opinions were also exchanged over the response of energy-consuming industries, development of technologies, and the status of their adoption. Activities of government-related participants are described below. Under a Model Project for Utilization of Waste Heat from Incineration of Industrial Waste at Industrial Estate, five Thai people with Industrial Estate of Thailand visited Ministry of International Trade and Industry, NEDO, NKK Corporation, Toyota Motor Corporation, and Keiyo Food Industrial Park. Under a model project on the recovery of waste heat from paper sludge incineration, four Malaysian people with Ministry of Energy, Communications and Multimedia or with Energy Center visited Ministry of International Trade and Industry, NEDO, NKK Corporation, Toyota Motor Corporation, and Japan Paperboard Industries Co., Ltd. Under a model project on the utilization of paper sludge and solid waste, four Indonesian people with Ministry of Industry and Trade or with Ministry of Mines and Energy visited Ministry of International Trade and Industry, NEDO, Babcock-Hitachi K.K., and Oji Paper Co., Ltd. (NEDO)

FY 2001 report on the survey of the formation promotion subsidy project on the environmentally friendly type energy community. Potential survey of the commercialization of cogeneration using ligneous biomass in Kochi Prefecture; 2001 nendo kankyo chowa gata energy komyuniti keisei sokushin hojo jigyo. Kochi ken mokushitsu kei baiomasu riyo netsuden heikyu jigyoka kanosei chosa itaku gyomu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

Survey/study were conducted of potentiality of the cogeneration business using ligneous biomass in Kami County and the periphery of Kochi Prefecture. In the survey, the following were studied: regional characteristics of the said area, levels of technology of direct combustion/thermochemical conversion, future technical trends, system candidate, grasp/analysis of the resource amount, characteristics of ligneous biomass resource in the said area, analysis of economical efficiency of the procurement of biomass resource, grasp of energy users, etc. As a result, a system was selected of a 1,000kW scale cogeneration of ligneous resource. At the present technology level and under scale conditions, it was found out that the fixed bed direct combustion system was the most profitable in securing the economical realization. As to the system mostly for power generation, however, it was found out that the heat low in unit price of energy production should widely be used because the installation cost of plant is comparatively high. Facilities such as Kochi Medical Center where heat is in great demand throughout the year can expect profit from selling heat, and therefore, those have high potentiality of the commercialization. (NEDO)

FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on technology innovation indices to be worked out; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (gijutsu kakushin shihyo no sakutei ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For technology innovation, it is indispensable to arrange the environment where the continuous and spontaneous technology innovations are generated. >From this point of view, the paper re-confirmed functions of enterprises, universities and national research institutes that are main bodies of technology innovation. For the use for working out measures for activation as the basic data, conducted were the making of indices for surveying the whole system of technology innovation in Japan, and the study of the data to be prepared as statistics and the survey method. In the 1st stage, about 450 figure/table data related to technology innovation were collected for making them database from official statistic data and publications of governments and international organizations in Japan and European countries. Further, using official statistic data, about 240 figure/tables were made which seem to be important as indices of technology innovation. In the 2nd stage, on the basis of this database, the details of the activities were analyzed, and from the indices, the actual situation/subjects were considered. At last, the paper explained the index system of 'Oslo Manual' which is a guideline of working out OECD's innovation indices. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Machine industry technology field (Machine tool); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijjtsu senryaku) kikai sangyo gijutsu bun'ya (kosaku kikai bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a machine tool field. Corresponding to construction of an environment-friendly recycling economic society and economic growth as estimated change in social and industrial structure during 2010-2025, major themes are reuse of machine tools, energy saving, environment design, chip treatment and resource recovery. With preparation of information infrastructures in an advanced information society, major issues are 3D-CAD, remote diagnosis, remote control and self-restoration. Because of decline of the birth rate, positive employment of aged persons and women is desirable. New machining technology for new materials, and fusion of various machining technologies are important. For micro-technology, study should be made on the concept and effect of micro-factory (energy saving, space saving, cost reduction, higher accuracy and higher speed). For higher-accuracy machine tool, static, dynamic, thermal and movement characteristics are the key for improving the proper technology. For faster machining. fine basic structural element, faster main spindle and faster feed are important. (NEDO)

Fiscal 2000 report on result of development project of marine resources utilization system for energy conservation. Development of marine resources utilization system for energy conservation (Model demonstrative research and basic study); 2000 nendo energy shiyo gorika kaiyo shigen katsuyo system kaihatsu jigyo seika hokokusho. Energy shiyo gorika kaiyo shigen katsuyo system kaihatsu (model jissho kenkyu oyobi kiban kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-05-01

This paper explains the development of marine resources utilization system for energy conservation. The conceptual system is designed to take a large amount of deep sea water of 100 thousand to 1 million tons a day, to utilize it from the viewpoint of energy conservation using its coldness and purity characteristics, to then discharge it to the area of the sea in minimizing the environmental effect as well as obtaining effect such as absorption of carbon dioxide gas through cultivation of phyto-plankton. In pump-up technology, a piping system attaching on sea bed or floating with one or multiple constraints is applicable at present to all sites of geographical and oceanographic conditions. In utilization technology, use of deep-sea water as cooling water at a steam power plant, for example, improves generation efficiency by one point or more. In discharge and environment-related technologies, the research revealed that the deep-sea water from 300 m below releases carbon dioxide gas at surface, while photosynthesis can absorb the gas in the process of using nutrition contained in the deep-sea water; therefore, comprehensive examination is necessary taking energy utilization effect into account. Candidate sites were selected in areas of 200 m depth and within 5 km off-shore, with the optimum system examined at each site. (NEDO)

Report on the FY 1998 results of the New Sunshine Project (B version). Data attached 2. Development of coal liquefaction technology (Development of base technology of liquefaction (Project on internationalization of coal liquefaction technology)); 1998 nendo sekitan ekika gijutsu kaihatsu seika hokokusho (B ban). Ekika kiban gijutsu no kaihatsu (sekitan ekika gijutsu no kokusaika jigyo (fuzoku shiryo 2))

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

As a part of the project for internationalization of coal liquefaction technology, this paper reported on the potential survey for location of Indonesian low grade coal liquefaction (study of applicability of the improved BCL process and survey of hydrogen production technology using coal gasification). The survey was conducted of a locational possibility of a coal liquefaction commercial plant to be located at mine site in South Sumatra for Banko coal raw material. The improved BCL process was applied in which the results of the study by NBCL Takasago Research Institute were reflected. Further, the hydrogen production was studied by gasification of Banko coal, and the comparison was made with the conventional natural gas reforming method. As a result of the study using information/knowledge obtained during the conceptual design of Australian brown coal, the construction cost of commercial scale liquefaction plant with the Banko coal processing amount of 30,000 tons/day became 549.8 billion yen in the case of using natural gas as raw material for hydrogen production. This construction cost is the lowest as compared with 601.7 billion yen in the demonstrative BCL process and with 577.1 billion yen in the advanced BCL process. This is a process making use of features of Banko coal. The process for hydrogen production by the steam reforming method using natural gas has an advantage of increasing the production amount of coal-derived liquid the most of the three other methods. (NEDO)

Fiscal 2000 achievement report on research and development of intelligent infrastructure creation and utilization technologies. Research and development of fluid and high-temperature melt thermophysical property standard data and measuring technology; 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu jigyo seika hokokusho. Ryutai oyobi koonyutai no netsu bussei hyojun data to keisoku gijutsu no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Thermophysical data relating to industrially important materials and substances were determined and collected for databasing. In the buildup of standard data for natural circulation substances and their water solution thermophysical characteristics, pure ammonia and aqueous ammonia, containing 51.95 mol% and 83.74 mol% of ammonia, were measured, and the excessive molar volume, isothermal compression rate, and the coefficient of volume expansion were acquired. In the buildup of standard data for polymeric thermophysical properties, blends of poly(PPO) and polystyrene were taken up, and the dependence of CO2 solubility on the composition was studied. In the buildup of standard data involving fluids mainly refrigerants, heat of evaporation, specific heat capacity of liquid refrigerant, and speed of sound in rarefied refrigerant gas were measured, and various apparatuses for measuring PVT (pressure, volume, temperature) were developed. In the buildup of standard data relating to the vapor-liquid equilibrium property of fluids, a tertiary system comprising water, alcohol, and a polymer of ethylene glycol at 298.15K was studied, and measured by use of a constant pressure flow type vapor-liquid equilibrium measuring apparatus. (NEDO)

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - material technology field (nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bunya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the nonferrous metal field relating to the FY 1999 long-term energy technology strategy. The needs for electronics products are increasing toward the 21st century. Domestically the competition with other countries in enlarging the market share has been intensifying. At the same time, the smaller the size of device becomes, the more the barriers in technology to be overcome increase. In the development of Si wafer to cope with such a situation, there are a lot of problems to be broken down in liaison with industry/government/university. Compound semiconductors are higher in speed than Si, and have a marked feature of producing light, but are difficult in crystal growth. It was in the past 20 years that the development of commercialization technology has rapidly advanced. Compound semiconductors are indispensable as a device in the energy problem which strongly influences the global environment. In the U.S., for the military use, a policy for upbringing national industries has been carried out since 1993. The role of compound semiconductor materials playing as the fundamental industry which supports the semiconductor industry and system industry as the nation's core industries is important even in Japan the same as in the U.S. (NEDO)

Report on the FY 1998 results of the New Sunshine Project (B version). Data attached 1. Development of coal liquefaction technology (Development of base technology of liquefaction (Project on internationalization of coal liquefaction technology)); 1998 nendo sekitan ekika gijutsu kaihatsu seika hokokusho (B ban). Ekika kiban gijutsu no kaihatsu (sekitan ekika gijutsu no kokusaika jigyo (fuzoku shiryo-1))

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

As a part of the project for internationalization of coal liquefaction technology, this paper reported on the potential survey for location of Indonesian low grade coal liquefaction (study of applicability of the improved BCL process and survey of hydrogen production technology using coal gasification). The survey was conducted of a locational possibility of a coal liquefaction commercial plant to be located at mine site in South Sumatra for Banko coal raw material. The improved BCL process was applied in which the results of the study by NBCL Takasago Research Institute were reflected. Further, the hydrogen production was studied by gasification of Banko coal, and the comparison was made with the conventional natural gas reforming method. As a result of the study using information/knowledge obtained during the conceptual design of Australian brown coal, the construction cost of commercial scale liquefaction plant with the Banko coal processing amount of 30,000 tons/day became 549.8 billion yen in the case of using natural gas as raw material for hydrogen production. This construction cost is the lowest as compared with 601.7 billion yen in the demonstrative BCL process and with 577.1 billion yen in the advanced BCL process. This is a process making use of features of Banko coal. The process for hydrogen production by the steam reforming method using natural gas has an advantage of increasing the production amount of coal-derived liquid the most of the three other methods. (NEDO)

FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on technology innovation indices to be worked out; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (gijutsu kakushin shihyo no sakutei ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For technology innovation, it is indispensable to arrange the environment where the continuous and spontaneous technology innovations are generated. >From this point of view, the paper re-confirmed functions of enterprises, universities and national research institutes that are main bodies of technology innovation. For the use for working out measures for activation as the basic data, conducted were the making of indices for surveying the whole system of technology innovation in Japan, and the study of the data to be prepared as statistics and the survey method. In the 1st stage, about 450 figure/table data related to technology innovation were collected for making them database from official statistic data and publications of governments and international organizations in Japan and European countries. Further, using official statistic data, about 240 figure/tables were made which seem to be important as indices of technology innovation. In the 2nd stage, on the basis of this database, the details of the activities were analyzed, and from the indices, the actual situation/subjects were considered. At last, the paper explained the index system of 'Oslo Manual' which is a guideline of working out OECD's innovation indices. (NEDO)

Fiscal 2000 achievement report on project for research and development of intelligent infrastructure creation and utilization technologies. Research and development project on high-speed deformation characteristics evaluation methods for metallic materials; 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu jigyo. Kinzoku zairyo no kosoku henkei tokusei hyoka hoho no kenkyu kaihatsu jigyo - Gyomu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts were made to develop methods for evaluating the characteristics of metallic materials experiencing high-speed deformation or impact deformation. The research was conducted by the research WG (working group) consisting of some participants of an international conference convened this fiscal year. The research result revealed that studies in Japan lopsidedly dealt with metallic materials at strain velocity of 10{sup 4}/second or less, such as steel, while many studies overseas dealt with materials other than metals at strain velocity over 10{sup 4}/second. The test and evaluation WG conducted high-speed tension tests for T6-treated aluminum alloys using the split Hopkinson bar method, hydraulic servo method, one bar method, and the sensing-plate method for measuring force, and the results were compared. It was then found that the one bar method produced disturbance more remarkably than the others and that the loading block structure and load rise time influenced the emergence of the peak load. The emergence of a peak load in the Hopkinson bar method or the one bar method had been predicted on the basis of the research conducted by the analysis group. (NEDO)

Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (Over-layered TCO on tempered glass for solar cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (kyoka class fukugo tomei doden kiban seizo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on the fabrication technology of over-layered TCO on tempered glass in fiscal 1994. (1) On the fabrication technology of heat-resistant over-layered TCO, thermal deformation of TCO substrates was studied by both experiment and numerical computation. The thermal deformation increased with carrier concentration. As the observation result on change in lattice strain of heated TCO films by high-temperature X-ray diffraction, lattice strain was largely affected by thermal expansion. (2) On development of the low-temperature heat treatment method of TCO films, a technological prospect was obtained for fabrication of low-resistance TCO films by heat treatment without strength deterioration of tempered TCO substrates. (3) On development of cost reduction technology, the large-area CVD equipment was devised on the basis of the inline tempering method which tempers substrate glass by air cooling after formation of SnO2 film as fabrication method of tempered TCO. The TCO substrate tempered by air cooling could endure the drop test of 227g and 1.5m. 5 figs., 1 tab.

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Machine industry technology field (Semiconductor equipment); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) kikai sangyo gijutsu bun'ya (handotai seizo sochi bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a semiconductor equipment field, viewing until 5-10 years after. For the future semiconductor industry, the favorable cycling of creation of new demands through performance improvement, and further technology innovation through market expansion is essential absolutely. Since technology development is followed by investment, not only the performance of each equipment but also the higher productivity and cost balance of the whole factory are essential. Self-intelligent function and networking are thus necessary for the equipment. As measures for environment preservation and energy saving, such innovative technologies are required as recycling, reuse, reaction process improvement and alternative technology. Because of diverse final products and a short life time of products, a large-scale collective investment is becoming difficult. A mini-line sequential investment production system according to demand scales is under investigation. Some issues such as micro-technology, realization of 300mm wafer, modularization, CIM, reliability and standardization are also described. (NEDO)

Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Survey of research management technique to contribute to formulation of long-term energy strategy); 2000 nendo choki energy gijutsu senryaku ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (choki energy senryaku sakutei nado ni kansuru kenkyu kanri shuho no chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of acquiring research management related basic materials necessary in the study of long-term energy strategy, a survey is conducted of the history, theory, and techniques of research management, the state of its utilization, and the products. The results of the survey are compiled into an introduction, itemized discussion, and materials. In the introduction, the purpose and basics of research management are discussed and confirmed. Taken up in the itemized discussion are an item (1) on research management relating to the selection of themes for research and development, which discusses the formulation of research and development strategy, selection of themes for research and development, formulation of plans for them, and a theme selection assisting system, an item (2) on research management relating to the management of research implementation, which discusses the management of implementation of research and development, interim assessment, and an implementation management assisting system, and an item (3) on the studies of key points for implementation and of research management for NEDO (New Energy and Industrial Technology Development Organization) to practice. As for the materials, they comprise commentaries on theories and techniques, an ex post facto assessment system and instances of assessment, list of persons related to research management, and commentaries on reference materials. (NEDO)

Report on the survey in fiscal 1998. A survey on long-term energy technology strategy (a survey related to arrangement of information groups and aiding means for establishing policies related to research and development of energy and environment technologies); 1998 nendo choki energy gijutsu senryaku chosa. Energy kankyo gijutsu kenkyu kaihatsu ni kakawaru seisaku kettei no tame no johogun no seibi narabi ni shien shuho ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This paper discusses aiding means for establishing the research and development strategy for maximizing greenhouse effect gas reduction for a short period (year 2010) and an ultra long period (year 2030 and on). First, the situation surrounding the existing energy and environment technologies and technological assignments (themes) were put into order. Rough calculations were made on the selected themes as to their effect of greenhouse effect gas reduction. Based on the result of these reduction amount calculations, provisionary introduction scenarios including analyses by groups and users were prepared according to each theme. On the other hand, data groups related to the energy and environment technologies were investigated and put into order. The data groups include literatures and achievements of the past researches, and are expected of utilization for estimating the introduction potential to calculate effects of future research and development. In addition, discussions were given on methods to analyze cost-effect relationship in the energy and environment technologies. Importance was placed on the case surveys inside and outside the country, and simple models suitable for themes in the New Sunshine Project were built for an attempt of case studies. (NEDO)

FY 1999 report on the survey of the basic cooperation project of enhancement of the international energy consumption efficiency. Project on promotion of exchanges with the persons concerned with government agencies, etc.; 1999 nendo kokusai energy shohi koritsuka nado kyoryoku kiso jigyo, kokusai energy shohi koritsuka chosa nado kyoryoku kiso jigyo chosa hokokusho. Seifu kikan nado kankeisha koryu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of promoting the understanding of effective energy utilization and constructing corporative relations between countries, the persons concerned with government agencies of India, China, Indonesia, Vietnam, Myanmar and Thailand were invited to Japan, and exchanges of opinions were made on policies, technical development, the state of the introduction, etc. The persons concerned with governments of India, China and Indonesia participate in NEDO Forum 2001 to give lectures on the energy policy of their own. The persons sent from the Vietnamese government paid visits for survey to NEDO, Obayashi Corp., Kawasaki Heavy Industries, Ltd., Mitsubishi Materials Corp. and Taiheiyo Cement Corp. as reference of the model project on cement sintering plant power reduction. The persons sent from the Myanmar government paid visits for survey to NEDO, ECCJ, Chiyoda Corp., Yokogawa Electric Corp. and Cosmo Oil Co. as reference of the model project on energy conservation at fertilizer plant. The persons concerned with the Thai government paid visits for survey to the plants concerned with the model project on residue combustion waste heat recovery facilities at paper mills and the model project on waste heat recovery at steel material heating furnace. (NEDO)

Fiscal 1997 report on the development of an energy use rationalization ultra-high tech liquid crystal technology. Project of development/promotion of ultra-high tech electronic technology / technology of design/control/analysis of new functional electronic materials; 1997 nendo kenkyu seika hokokusho energy shiyo gorika chosentan ekisho gijutsu kaihatsu. Chosentan denshi gijutsu kaihatsu sokushin jigyo / shinkino denshi zairyo sekkei seigyo bunseki gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

A research was conducted with the aim of developing an ultra-low power consuming type information display which supports the next next generation informatizing society. As to the function combined type fine structure formation technology, a formation technology of fine structure supporting multi-layer pixel by organic polymer materials was established to confirm a possibility of adopting it to high functional liquid crystal display. Concerning the high functional fine structure formation technology, a study was proceeded with on holographic PDLC which is an interference reflection coloring method. In relation to the low temperature film formation technology of ferroelectric thin films, a film formation device was introduced to obtain basic data, and at the same time a possibility was studied of improving film characteristics by laser annealing conducted after the film formation. Moreover, concerning the new functional material technology, studies were made of optical interference/high light-scattering control materials, light alignment elements, ultra-high purity/ultra-reliable optical materials, ultra-anisotropy optical materials, etc. About the light reflection characteristics control technology, studied were new liquid crystal molucular orientaion control technology, multi-dimensional anisotropy structure formation technology, etc. 100 refs., 273 figs., 58 tabs.

Project to support promotion of forming an environmentally friendly energy community. Survey report on 'a survey on introduction of an RDF electric power generation system utilizing general wastes in the Noto area'; Kankyo chowagata energy community keisei sokushin hojo jigyo. 'Noto chiiki ni okeru ippan haikibutsu riyo RDF hatsuden no donyu ni kansuru chosa' chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A business feasibility survey was performed on introduction of an RDF electric power generation system utilizing general wastes in the Noto area. Wastes quantity was estimated by accounting for large-sized wastes to be generated newly as a result of enforcement of the container package recycling law, and transfer of non-combustible wastes to incineration. The quantity was estimated to be 84,000 tons annually. Quantities of RDF and heat were calculated from this estimation to be 103 tons per day and 400 lkcal/kg respectively. According to the result of discussing the RDF transportation systems, time-based freight was found advantageous for short distance, and distance freight system for long distance in terms of cost. Discussions for RDF power systems were carried out on an RDF circulation fluid bed furnace plus ash melting furnace, a fluid bed gasification melting furnace, and shaft furnace type gasification melting furnace. In a comprehensive view, it is difficult to distinguish them in terms of merit and demerit. Molten slag was assumed to be re-utilized, but cost for the re-utilization should be considered. According to the result of discussing the business feasibility, it was found difficult to make it profitable by operating the RDF power generation business alone, and wastes incineration charge should be collected. (NEDO)

FY 1998 research result report. Ultra-high liquid crystal technology development for energy use rationalization (Technology of design/control/analysis of new functional electronic materials of the ultra-high electronic technology development promotion project); 1998 nendo kenkyu seika hokokusho. Energy shiyo gorika chosentan ekisho gijutsu kaihatsu (chosentan denshi gijutsu kaihatsu sokushin jigyo shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Element technology is studied to realize a reflective-type, full-color, and high-resolution liquid crystal display for super-low power consumption data display. As to the functional compound microstructure formation technology, a 4-inch panel was trially fabricated using two-layer guest-host liquid crystal technology to achieve the desired display performance by control of molecular orientation. Further, holographic PDLC elements were favorably test-fabricated. A ferroelectric PZT thin layer was formed by forming layer at low temperature at which a glass substrate can be used. Optical interference/optical dispersion type optical control materials were studied by liquid crystal/polymer composition. Also studied were super-pure/super-reliable liquid crystal compound/liquid crystal composite systems and super-anisotropic liquid crystal compound by modeling ionic impurities and liquid crystal molecular interaction. In relation to the control technology of optical reflection characteristics, effects of liquid crystal molecular structures (derivative effect and copolymer composition) on orientation were elucidated. As to the technology to form multi-dimensional anisotropic structures, efforts were made for the heightening of formation technology of simple RGB (red, green, blue) directional reflection layers using acrylate materials. The paper also outlined the comprehensive survey. (NEDO)

Fiscal 2000 research achievement report on the development of super-advanced liquid crystal technology for energy use rationalization. Development promotion project for super-advanced electronic technology - Design, control, analysis, etc., of electronic materials having novel functions; 2000 nendo energy shiyo gorika chosentan ekisho gijutsu kaihatsu seika hokokusho. Chosentan denshi gijutsu kaihatsu sokushin jigyo (shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-04-01

Efforts are focused on the verification of target devices under the respective subjects, and activities are conducted with the development system reinforced. Three newly proposed reflection type liquid crystal devices achieve the target specifications of a reflection factor of 60% or higher and a contrast ratio of 15:1 or higher. Studies are conducted involving the five fields of (1) multilayer reflection devices, (2) memory retention liquid crystal devices, (3) single pixel color devices, (4) directional reflection devices, and (5) joint research. Research and development in field (1) covers ultra-anisotropic optical materials, ultrahigh reliability host liquid crystal materials for guest-host liquid crystals - mixed system, low voltage driven/high load holding liquid crystal compound systems, and new liquid crystal molecule orientation control technology; in field (2), low temperature fabrication of ferroelectric thin film, and ultrahigh purity high reliability liquid crystal compounds; in field (3), materials capable of controlling optical interference and higher order light scattering, photoregulation devices, highly birefringent liquid crystal materials - mixed system, and ultrahigh efficiency light scattering liquid crystal compounds; and, in field (4), multi-dimensional anisotropic structure fabrication technology and ultra-anisotropic optical materials. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Pt. 2. Basic research on industrial technology strategy (Individual technology strategy.) Material technology field (Fine ceramics); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 2. Sangyo gijutsu senryaku sakutei kiban chosa (bun'ya betsu gijutsu senryaku) zairyo gijutsu bun'ya (fine ceramics gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the basic research result on industrial technology strategy for a glass field. Japan is facing such various economic problems as attack by developing countries, collapse of economic babble and yen's appreciation, and environment problems over a period of several years, and a glass industry is also under the influence of such problems. For continuous development of Japan and improvement of the international competitiveness of Japan, development of a glass industry is essential. Both co- possession of technical issues by cooperation of the members, and breakdown of conventional structures of the industry are necessary. Clarification of technical issues, and cooperation of industry, academia and government is essential. The current state, promise and issues of domestic and overseas glass technology and its R and D are described. The joint target of an industrial strategy for researchers and engineers of every sector, and the approach to such target are showed from the viewpoint of the issues for Japan and preparation of common basic technology. The role of each sector for environment preparation and policy is described to achieve the target. (NEDO)

FY 2000 report on the survey on the long-term energy technology strategy, etc. - Basement technology for implementation of industrial technology strategy. Survey on the extraction of preferential important technical subjects in FY 2002; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho - sangyo gijutsu senryaku sakutei kiban chosa. 2002 nendo yusenteki juyo gijutsu kadai no chushutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This survey is to investigate the consciousness of researchers and engineers of enterprises, universities, etc, of the importance of about 100 important technical subjects in 'the industrial technology strategy' prepared by the Ministry of Economy, Trade and Industry. In the questionnaire survey, the following were selected: 1)systematization of policy in consideration of the social needs and R and D of the technology to realize it; 2) R and D of the technology to advance the future frontier; 3) technical subjects that the government should promptly start to tackle in each classification in arrangement of the intellectual basis. Answers to the following items were obtained: 'selection reasons' for why it was considered important in each technical subject, 'lead time' toward the time of the industrialization, 'international positioning' of Japan against Western countries, 'possibility of heightening/maintaining the international competitive force,' and 'items that the government should participate in.' In 1), the following four big targets were arranged: 'security/safety,' 'informatization,' 'environment' and 'energy'. In 2), the following technical subjects were arranged: 'biotechnology,' 'information communication technology,' 'production technology,' 'materials/process technology,' 'energy/environment' and 'new blending/traversable/integrated technology.' In the results of the survey, analyzed were big targets, and trends and characteristics at technical field levels. (NEDO)

Report on the surveys in fiscal 1999 on the long term energy technology strategy investigations. Investigations on foundations to establish industrial technology strategies (Structuring of emphasizing strategies and the circulation type economic society harmonizing with environment); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (jutenka senryaku (kankyo to chowashita junkangata keizai shakai no kochiku))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper is a survey report for fiscal 1999 on structuring of the circulation type economic society harmonizing with environment. In order for Japan in the 21st century to solve various problems while maintaining sustainable development of the industries and economy, structuring the industrial technology strategies is indispensable. In order to establish targets to structure the circulation type society harmonizing with environment, small targets were broken down and specific technological examples were extracted as seen from categories based on flows of goods and the policy aspects. Then, from the viewpoints of extrication from wastes, reduction of risks caused by harmful substances, and growth under suppression of the global warming, case studies were performed on policy aspects toward the year 2010. Based on these studies, images of the emphasizing strategies were prepared, that are built on three pillars of 'R', the reduction, reuse and recycling. Specific technological examples were extracted comprehensively and specifically from research and development themes in research institutions inside and outside Japan to prepare a fundamental material for establishing the small targets. Furthermore, the examples were classified from the aspects of the three Rs. Areas of technological development seeds and areas with fewer seeds were made clear successfully. (NEDO)

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - material technology field (nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bunya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the nonferrous metal field relating to the FY 1999 long-term energy technology strategy. The needs for electronics products are increasing toward the 21st century. Domestically the competition with other countries in enlarging the market share has been intensifying. At the same time, the smaller the size of device becomes, the more the barriers in technology to be overcome increase. In the development of Si wafer to cope with such a situation, there are a lot of problems to be broken down in liaison with industry/government/university. Compound semiconductors are higher in speed than Si, and have a marked feature of producing light, but are difficult in crystal growth. It was in the past 20 years that the development of commercialization technology has rapidly advanced. Compound semiconductors are indispensable as a device in the energy problem which strongly influences the global environment. In the U.S., for the military use, a policy for upbringing national industries has been carried out since 1993. The role of compound semiconductor materials playing as the fundamental industry which supports the semiconductor industry and system industry as the nation's core industries is important even in Japan the same as in the U.S. (NEDO)

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Fiber technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sen'i gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the fiber industry technology field. For the fiber industry to meet the requests from the society in the 21st century and to develop as an industry, it is necessary to achieve the technology innovation by making use of technology and recreation. As important seeds for which the Japanese fiber industry should focus efforts, the following were cited: To double the strength of general-purpose polymer synthetic fiber; To add the environmental control function by gradient functionalization; To practically use the environmental harmony type nonaqueous working process; To develop the fiber environmentally friendly and fiber working process; To give sensor functions such as temperature-humidity sensitive function; To develop petroleum substituting fiber materials; To develop separation/decomposition technology and reproduction technology of composite materials; etc. Further, in the recreation field, the paper cited the arrangement of intellectual property protection/design property preservation, and the promotion of commercial base making and strengthening of life style proposals. (NEDO)

Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field / Development of technology to treat aquatic environment by using microorganisms fixed on carbon fabrics (abbreviation: carbon/aquatic environment project) (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / tanso sen`i nansoshiki eno biseibutsu kochaku gensho wo riyoshita mizukankyo seibi gijutsu no kaihatsu (ryakusho: tanso mizu kankyo project) daiichi nendo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Out of the development of technology to arrange the aquatic environment using phenomena of microorganism fixation on carbon fiber soft textures, the paper stated the fiscal 1997 result. On carbon fibers in a state of swaying in water, microorganisms in water fix in an amazingly large quantity. A catalog was compiled of 58 kinds of carbon fabrics trially woven and knitted. When carbon fiber is used as activated sludge carrier, activity of microorganism lasts more than one year. Only a little amount of surplus sludge is generated. The fixed microorganisms are more active in case of carbon fiber than in case of nylon and polyester fibers. Fiber texture models of carbon fiber fixing activated sludge groups were proposed. By pump operation, the water flow inside/outside microorganism groups is being accelerated. Several new strains of bacillus carboniphilus were isolated/identified from soil and marsh. To grasp relationships of characteristics among three elements such as the state of aquatic environment, fiber, and microorganism group, the experiment was prepared. Preliminary work is conducted to derive a simple equation for facility design, and experimental directions to obtain design conditions were proposed. 6 refs., 166 figs., 47 tabs.

FY 2001 report on the results of the survey of the formation promotion subsidy project on the environmentally friendly type energy community. Survey of the commercialization of high efficiency power generation using fuel of waste such as waste construction materials; 2001 nendo kankyo chowa gata energy komyuniti keisei sokushin hojo jigyo. Kensetsu haizai tou haikibutsu nenryo ni yoru kokoritsu hatsuden no jigyosei chosa chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

The paper studied a system for power generation and heat utilization using wood chips such as waste construction materials, used paper inappropriate for recycling and plastic refuse from neighboring local governments as fuel and assessed a potentiality of the commercialization. As to the system, the following were conducted: selection of the optimum combustor in the waste power generation, survey of the state of corrosion of boiler tube in the steam conditions and waste properties, selection of the optimum quality of boiler materials, etc. In the assessment of a potentiality of the commercialization, the commercialization was studied as in-house power generation/heat utilization business with a power generation scale of 9,950kW and a steam supply scale of 31.5t/h. As a result of the study, the energy conservation effect was found to be expected as follows: reduction of 33,000kL/y crude oil equivalent and reduction of 16,000t-CO2/y emission. As a result of studying the economical efficiency of business, the unit price of wood chip purchase and the unit price of waste plastic treatment which are required to recover the difference of the initial investment within 5 years were greatly different from the level as an aim. For the realization as business, a subsidy of 15% and more cost reduction were requested. (NEDO)

Fiscal 1996 report on the results of the study under a consignment from NEDO of environmental friendly type metal base-materials recycling utilization basic technology and element/overall process. For public; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko kyodo kenkyu itaku. Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu: yoso sogo process kenkyu seika hokokusho (kokaiyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A study of `the next generation new iron steel making process` was conducted in which impurity elements in scrap are removed and recycled into high quality steel making materials, and at the same time total emissions are reduced during the process from scrap melting to steel making. The paper reported the fiscal 1996 results. In the study of the scrap recycling process, conducted were a study of the total system to remove impurities in the high temperature preheating furnace, a large scale experiment of de-coaling combined type de-coppering/de-tinning under reduced pressure of iron melting, a study of recycling technology of dust to the scrap melting furnace, etc. In the study on preheating/melting technology, a study of the scrap melting furnace of high-productivity/low-energy vertical type, a study of the scrap preheating method using the packed bed type preheating furnace, a study on the flue gas control at the time of preheating/melting, a study of the fast assessment method for organic compounds in flue gas, etc. In the evaluation of the total system, a study of preheating/melting/environmental systems using experimental plants. 20 refs., 23 figs., 10 tabs.

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Part 1. Technology strategy by field - material technology field (fine ceramics technology field); 1999 nendo choki energy gijutsu senryaku ni kansuru chosa. 1. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (fine ceramics gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the fine ceramics technology field relating to the FY 1999 long-term energy technology strategy. The fine ceramics industry is a new industry for which the future development is expected. It has far-reaching effects on other industries. Japan has the advantage over other countries. As subjects to remarkably develop the industry, needed are the long-term basic preparation which promotes technology innovation such as the promotion of the fundamental/creative R and D, construction of an industry/university liaison system, and arrangement of the intellectual base. Preparation of the competitive environment and promotion of policies paying attention to the market are needed which make the development under the private control by creative study/corporate activities possible. Also important are the demonstration of leadership and secure international competitive force in the light of Japan's international position. For the private-control development, the role and course of various groups should be made clear from a long-term aspect. It is desirable that university/government will newly develop innovative technology, and industry will make the present technology force more developmental and competitive. Support from the nation is requested for researches large in scale. (NEDO)

Achievement report for fiscal 1981 on New Energy and Industrial Technology Development Organization-entrusted projects. Solar energy technology research and development; solar panel experiment, manufacture, and verification (Photovoltaic power system practical application technology; ribbon-type crystal substrate process technology); 1981 nendo taiyo energy gijutsu kenkyu kaihatsu seika hokokusho (taiyoko hatsuden system jitsuyoka gijutsu kaihatsu). Taiyo denchi panel jikken seisaku kensho (ribon kessho kiban kotei no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Carried over from the preceding fiscal year are the development of ribbon crystal pulling technology and the studies of ribbon crystal substrate quality and plant operation. In the development of ribbon crystal pulling process, a pulling drive is built and the limiter mechanism is strengthened for improvement on ribbon crystal flatness, technologies are established for high-speed pulling of broad ribbon crystals, pulling system prototype is built, after-annealing technique is improved for eliminating distortion, and technologies are developed for continuous feeding of raw materials. In the quality examination of ribbon crystal substrates, a method is tested and studied for bringing about a decrease in the number of SiC grains. The object of the plant operation study is a plant capable of producing 250kW-equivalent ribbon crystals a year, and the efforts involve the ribbon pulling system, rough cutter, real-size cutter, etching unit, shape checker, packing, devices for production lines such as warehouses for products, electric power, gas, water, peripheral equipment for waste water treatment etc., ribbon specifications check, quality related assistance equipment to deal with unacceptable products etc., pollution-preventing facilities for the preservation of production environments, and plant buildings. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Electronic information technology field (Human process ware field for computers); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chsao hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process wear bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a human process ware (HPW) field on electronic information. Although the current HPW industry is not yet complete, various technologies concerned are being stored, and the HPW industry is expected as new major industry for home and personal information equipment. As factors hindering technological innovation in Japan, the incomplete market, poor cooperation between industry and government, ambiguous role of university, and poor standardization were pointed out. Technology trends were analyzed to extract seed technology fields from 3 viewpoints of mobile HPW available at any time, at any place and to anybody, HPW system capable of customizing every personal use, and HPW supporting development of a creativity. As general strategy, the technology seed chart and map of technical development targets for every HPW were prepared to conceive a route to practical use, and develop element technologies required for practical use, based on the future trend of the market. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Human life, medical care and welfare field (Medical health care technology field); 1999 nendo choki energy gijujtsu senryaku ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) ningen seikatsu iryo fukushi bun'ya (medidal health care gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 research result on Japanese technology competitiveness, future trend, technology innovation and policy needs in a medical health care field. Future international growth of a medical health care equipment industry is promising because of an expected progress of medical care technology, change in medical care needs and creation of the new global market. The current highlighted technical trend is fusion of medical technology with network, system, biotechnology and micro-machine technologies, and such fusion is expected to contribute to daily use, less/no invasion and improvement of medical treatment. Industry-government cooperative measures for upgrading an international competitiveness are as follows: an approach as national policy by preparing Japanese BECOM, preparation of a system supporting venture businesses for developing medical health care equipment, and systematic establishment of a medical-engineering cooperative system. Preparation of a complementary relation with overseas countries is also desirable. (NEDO)

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - chemical/process field (chemical/process technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (kagaku process bun'ya (kagaku process gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As to long-term energy technology strategy, the paper described the results of the FY 1999 survey of chemical/process technology. The future chemical technology should be transformed from the material production technology in which priority used to be given to convenience to new chemical technology in which the functions needed are to be created. The shortage of the developmental period and minimization of the waste are also desired by the use of new methods. For it, the industry/government/university should gather wisdom together and fulfil the requests from other industries of the country under the circumstances of the society which is aging, is decreasing in birthrate, and is being highly information-oriented. At the same time, the technology should be contributional to constructing the circulating type society which has environmental harmony. If not, it cannot be the technology which is recognized by the society. Efforts should be made for the fundamental technology development, technology to create the materials needed in the society, and development of new process technology to be recognized in the society. Further, the development of technology to meet the needs/restraints from the society should be promoted as seen in the environmental hormone. At the same time, the intellectual base should be prepared such as arrangement of the technology database for advancing smooth technology development. (NEDO)

Achievement report of projects in fiscal 2000 for measures on technologies to fix and utilize effectively carbon dioxide. Development of program system technologies to fix and utilize effectively carbon dioxide - researches on key technologies (Developing technology to fix carbon dioxide electrochemically); 2000 nendo program hoshiki nisanka tanso koteika yuko riyo gijutsu kaihatsu (kiban gijutsu kenkyu) seika hokokusho (kokaiyo). Nisanka tanso no denki kagakuteki koteika gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to prevent global warming, research and development has been made on a carbon dioxide fixation technology using electrochemical means. This paper summarizes the achievements in fiscal 2000. In the research of a technology to return carbon dioxide to hydrocarbon such as methane electrochemically utilizing the high concentration carbon dioxide-methanol system, basic studies were performed on electrolytic reduction of CO2 using a methanol solvent system, and experimental studies were executed on high-speed reduction of carbon dioxide using gas diffusion electrodes. In the basic property experiment on diamond electrodes, high carbon dioxide reduction activity was obtained by having copper carried in the diamond electrode. In the CO2 electrolytic reduction experiment on three-phase interface using a copper net electrode, CO, ethylene, and methane were produced, while the electrode has retained the activity for an extended period of time, and the CO2 conversion rate reached about 66%. In structuring an electrochemical carbon dioxide fixation system, specifications for the CO2 electrolytic reduction equipment were determined, design, manufacturing, and electrode materials were selected, supporting electrolytes were discussed, and the entire system flow and liquid resistance were discussed. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Electronic information technology field (Human process ware field for computers); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chsao hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process wear bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a human process ware (HPW) field on electronic information. Although the current HPW industry is not yet complete, various technologies concerned are being stored, and the HPW industry is expected as new major industry for home and personal information equipment. As factors hindering technological innovation in Japan, the incomplete market, poor cooperation between industry and government, ambiguous role of university, and poor standardization were pointed out. Technology trends were analyzed to extract seed technology fields from 3 viewpoints of mobile HPW available at any time, at any place and to anybody, HPW system capable of customizing every personal use, and HPW supporting development of a creativity. As general strategy, the technology seed chart and map of technical development targets for every HPW were prepared to conceive a route to practical use, and develop element technologies required for practical use, based on the future trend of the market. (NEDO)

Report on achievements in fiscal 1999 on research and development of immediately effective and innovative energy environment technology. Part 1. Development of immediately effective and high-efficiency solar cells, and development of technology to slice and manufacture thin-type large-area polycrystalline substrates; 1999 nendo sokkoteki kakushinteki energy kankyo gijutsu kenkyu kaihatsu seika hokokusho. Sokkogata kokoritsu taiyo denchi gijutsu kaihatsu (usugata daimenseki takessho kiban slice seizo gijutsu kaihatsu 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective of decreasing silicon usage quantity for the purpose of reducing the solar cell production cost, development is being performed on an ingot cutting technology to cut a silicon ingot to Kerf loss of 150 {mu} m and thickness of 150 {mu} m, and in which the produced wafers can withstand the cell making. Investigations revealed that a wire saw is suitable as the cutting system, and the wire used must have a diameter of less than 120 {mu} m, and a strength of more than 3850 N/mm{sup 2}. A prototype wire was fabricated, whose diameter is 120 {mu} m, and in which the strength is distributed between 3870 and 4110 N/mm{sup 2}. It was found possible that a wire of 160 {mu} m can be used to slice an ingot having a cross section surface of 150 mm square and a length of 300 mm into a slice having a Kerf loss of 200 {mu} m and a thickness of 180 {mu} m. This wafer had the in-plane distribution of the substrate thickness at {+-} 12.5 {mu}, swell of 120 {mu} at maximum, and surface roughness of 5 {mu}. Making ten of these wafers into a cell resulted in a yield of 60%. Assignments are the clarification of the properties of the cutting wire, the preparation of a thin wire with homogeneous quality, and the establishment of a technology to cut Kerf loss of 150 {mu} and substrate thickness of 150 {mu}. (NEDO)

Fiscal 2000 achievement report on project for research and development of technologies for intelligent infrastructure creation and utilization. 'Development of high-efficiency protein expression system - 1 Development of system capable of high-efficiency expression of hyperthermophile-derived protein'; 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu gyomu seika hokokusho. Kokoritsu tanpakushitsu hatsugen system no kaihatsu -1 (Cho konetsukin yurai tanpakushitsu wo kokoritsu ni hatsugen suru system no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted aiming at the establishment of a system to enable the high-efficiency expression of the gene products of P. horikoshii OT3 and A. pernix K1. In an effort to develop a high-efficiency protein expression system with Escherichia coli acting as the host, studies were made about the expression of hyperthermophile protein by arginine rare codon elimination, and Ph FEN (flap endonuclease) was successfully overexpressed. In the development of Bacillus strains, screening was conducted for novel hosts, and a library was constructed for a screening task suitable for hyperthermophile-derived protein production. A system was also constructed capable of the high-throughput expression of various kinds of genes using Bacillus brevis. In the study of the expression of hyperthermophile-derived genes using T. thermophilus, promoter replacement resulted in an approximately 2-fold increase in representation at the maximum. Moreover, studies were made about the length at which foreign genes were efficiently incorporated into the T. thermophilus genome. (NEDO)

Fiscal 1997 report on the R and D project consignment from NEDO on industrial science and technology. R and D on total base technology for marine resources (Mn nodules mining system) (total system (experimental plan)); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (mangan dankai saiko system) seika hokokusho (total system (jikken keikaku) hen)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Study was made on the design of experiments for confirming the technological and economical feasibility of commercial production of Mn nodules. An experimental sea area was selected considering Mn nodule characteristics such as concentration, continuity of nodule distribution and nodule size, and sea bottom topographic features such as flatness and exposed bed rock disturbing traveling of nodule collectors. The experimental plan was decided on the basis of the survey and study on an experimental scale, various requirements, weather and sea weather features of the sea area, and sea bottom conditions. Based on the experimental plan, various verification tests and simulation analyses were carried out, and functions of various equipment were confirmed. The conceptual design of a mining system assumed both pump-lift and air-lift systems, and yearly production rates of 2 and 3 million tons by 2 mining barges, and summarized main points of every system. As the evaluation result, the future direction of commercial production of Mn nodules was clarified to a certain extent. 5 figs., 21 tabs.

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Material technology field - Nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as technical competitive force and the forecast in the material field, especially in the silicon wafer and compound semiconductor field. As to the silicon wafer technology, the following technologies were pointed out as those to be reinforced: future silicon crystals, mirror processing wafer, breakthrough technology needed for super LSI, heat-treated wafer, epitaxial wafer, SOI wafer, measuring/assessment technology, etc. In relation to the compound semiconductor technology, survey/study were made on the bulk crystal growth technology, epitaxial growth technology, crystal growth device technology, wafer processing technology, inspection/evaluation technology, device processing technology, etc. As the comprehensive strategy, the following were proposed: establishment of the place for industry/government/university cooperation, establishment of the center for evaluation of wafer materials/characteristics/process, and establishment of the compound semiconductor R and D center where men of practical business ability from industry/government/university get together and conduct the R and D of production technology and production facilities for compound semiconductor materials and devices. (NEDO)

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Aerospace technology field - Airplane technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (koku uchu gijutsu bun'ya (kokuki gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the airplane technology field. In future airplane industry, to meet the requests/restrictions from the society in the international airplane industry in the recent years, it is predicted that technology innovation will advance centering on the following four fields: next generation airplane technology to enable the innovative cost reduction in development/production, technology to realize the substantial reduction in flight cost of airline, technology to enhance reliability for the next generation flight which meets the multi-frequency flight/increasing demand for small plane, and airplane frontier technology. Moreover, regulations especially on noise, CO2 reduction and NOx reduction are becoming very strict internationally because of the increasing concern about global environmental problems. It is urgently needed to establish technology to cope with these trends. As the comprehensive strategy, the following are considered: development of airframe under the leadership of Japan and securing of the demand, efficient arrangement and operation of large-scale experimental facilities, IT adoption to the airplane industry, organic cooperation by industry/university/government, etc. (NEDO)

FY 2001 report on the survey of the formation promotion subsidy project on the environmentally friendly type energy community. Potential survey of the introduction of a processing/power generation system using ASR in the South region of Tochigi Prefecture; 2001 nendo kankyo chowa gata energy komyuniti keisei sokushin hojo jigyo. Tochigi ken nanbu chiiki ni okeru ASR (Shuredda dust) wo nenryo to shita shori hatsuden system no donyu kanosei chosa chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the consistent processing of waste automobile in Tochigi Prefecture and the neighboring area, survey/study were made of the thermal recycle using shredder dust, ASR (automobile shredder residue), as fuel as well as the material recycle. As to the amount of material recycle of waste automobile, the amount of potential recycle of iron, copper, plastic, etc. was estimated, and it was found out that the potential recycle of parts such as engine was 40-45%, that of iron scrap 35-40%, and that of ASR 20-25%. The amount of fuel (ASR amount) to be thrown into the gasification power generation system was set up at 150t. As the gasification power generation system, the pyrolysis gasifier and shaft kiln gasification melting furnace were selected. In the study of economical efficiency of the gasification power generation system, the following were considered: ASR processing price, plant cost, subsidy, running cost, char receiving price, power selling price, etc., but even in the case of the pyrolysis gasifier with highest valuation, both payback years and IRR did not reach the target. (NEDO)

Fiscal 2000 project of inviting proposals for international joint research - invitation for international proposal (Energy conservation No.2). Achievement report on international joint study on popularization promotion of geothermal heat pump-assisted environmentally compatible heating system for Changchun City, China; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (Shoe No.2). Chinetsu heat pump ni yoru Chugoku Changchun shi kankyo tekigogata danbo system no fukyu sokushin ni kansuru kokusai kyodo kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A geothermal heat pump-assisted heating system is introduced into Changchun City and a survey is conducted to determine if the system may be popularized in this extremely cold region located in the northeastern part of China. In concrete terms, the hot water that circulates through the office building of Changchun Ground Heat Development Co., Ltd., is switched to hot water prepared by a geothermal heat pump. The test continued from December 2000 to March 2001. It is then concluded that heating by geothermal heat pumps will be fully serviceable to Changchun City. Implemented are (1) the shift from the coal fired boiler system to a geothermal heat pump system comprising 16 subterranean heat exchangers for the heating of the office building which is approximately 1000 m{sup 2} large, (2) long-term monitoring of the operating conditions, (3) measurement of subterranean heat exchanger thermal conductivity and subterranean temperature, and (4) the study of pipe shapes for improved thermal efficiency, grouting materials, and the like. (NEDO)

Report on research results of the FY 2000 medical/engineering cooperative research project. Fundamental research on microelectrode-aided gene information measurement system (Research and development of gene diagnostic system using superhigh-sensitivity microelectrode DNA chip ECA - electrochemical array); 2000 nendo igaku kogaku renkeigata kenkyu jigyo kenkyu seika hokokusho. Bisho denkyoku riyo idenshi joho keisoku system ni kansuru kiban kenkyu (chokokandogata bisho denkyoku DNA chip ECA (denki kagaku allay) wo mochiita idenshi shindan system no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The fundamental research is conducted for developing the microelectrode on which a synthetic oligonucletide probe is immobilized, and for establishing the system capable of detecting the hybrid formation simply and quickly, in order to develop the advanced DNA chips for diagnosis. The project results include development of the prototype array electrode with 25 1mm-diameter gold electrodes uniformly arranged at intervals of 4.5mm; development of the electrochemical activity analyzer for multi-electrode systems, showing the performance almost on a level with that of the existing electrochemical analyzer for the single-electrode systems; establishment of the gene databases; development of the method which can produce a sufficient quantity of nucleic acid for DNA chip analysis by studying the method of preparing the nucleic acid from the blood serum, preparing RNA from a trace quantity of the living liver sample and amplifying the genes, wherein the nucleic acid is produced while its profile before the amplification is kept intact; and establishment of the method for detecting the hepatitis B virus by combining the electrochemical detection of DNA by a non-immobilized probe with the PCR method. (NEDO)

Fiscal 1998 achievement report on regional consortium research and development project. Research and development for developing basic technologies of composite laser-aided metal machining into highly advanced system (Technology of machining process systematization for furnishing titanium and titanium alloys with advanced functions - 2nd year); 1998 nendo fukugo laser nado ni yoru kinzoku kako kiban gijutsu no kodo system ka no kenkyu kaihatsu seika hokokusho. 2. Chitan oyobi chitan gokin eno kokino fuyo kako system ka gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the creation of new industries and for their expansion to the consumer market, efforts are made to develop laser-aided technology of bonding titanium with other metals and CAD/CAM (computer-aided design/computer-aided manufacture)-aided technology of high-precision multidimensional laser machining for titanium. In the development of technology for bonding titanium and other metals, combinations of titanium and stainless steel and titanium and copper are examined, and a dissimilar metal joint is successfully manufactured, free of cracks at a tension shear strength level of approximately 4200N/40mm and shear stress of 200MPa or higher. In the study of the mechanism of bonding, it is found that a sound weld metal is created with the formation of intermetallic compounds well inhibited by allowing titanium to be on the upper surface. In the study of laser-aided titanium cutting, a dross-free cutting process is realized by optimizing cutting conditions such as those involving laser excitation and assist gas application. Three-dimensional laser-aided cutting is carried out in compliance with a 3-dimensional laser cutting program incorporating metal pattern data, and the process is found to reduce the number of necessary dies to 1/4 to shorten and simplify the process. (NEDO)

FY 2000 report on the survey of the project to promote and support the formation of the environmentally friendly energy community. Study of the industrialization of the gasification power generation business by the pressurized two-stage gasification process using organic waste such as waste plastic as raw materials; 2000 nendo kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokusho. Kaatsu nidan gas ka process ni yoru hai plastic nado yuki haikibutsu wo genryo to suru gas ka hatsuden jigyo no jigyoka kento

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Viability was studied of the power generation business using plastic waste as fuel and the methanol production business. In the project, the container packing waste plastic which was sorted/collected is supplied by tender, and the organic waste such as shredder dust is mixed. And the electric power is supplied to the gasification power generation facilities by the pressurized two-stage gasification process, neighboring plants, etc. As an alternative, the methanol production was also studied. As a result of the study, if the total amount of the waste plastic needed at the supply price assumed at present can be supplied, the business can be viable economically even without subsidy, but if the supply risk in supposing tender is considered, a subsidy of approximately 10% of the equipment/plant investment is needed. As to the methanol production as an alternative, it was indicated that the economical efficiency is almost the same, but the profitability gets fast worse due to the waste plastic supply cost since there is not much income and expenses are high despite of the smaller investment size than that in the case of the power generation. (NEDO)

FY 2001 report on the results of the survey of the environmentally friendly type energy community project. Utilization of combustible waste as solid fuel in Shimizu City, Shizuoka Prefecture, and the wide spread sphere of municipalities (Facilities such as RDF+LNG combined use high efficiency waste power generation); 2001 nendo Shizuoka ken shimizu shi oyobi koiki shichoson ken ni okeru kanensei haikibutsu kokeika nenryo riyo kankyo chowa gata energy komyuniti keisei sokushin hojo jigyo chosa (RDF+LNG heiyo kokoritsu haikibutsu hatsuden tou shisetsu) chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

Survey/study were conducted of viability of an idea of the high efficiency power generation that combinedly use RDF from the refuse generated in Shizuoka/Yamanashi/Nagano prefectures and LNG from the LNG base in Shimizu City, Shizuoka Prefecture. In the survey of raw materials for RDF, the present amount that can be supplied to RDF power generation was estimated at 280 t/d in RDF and 4,300 Kcal/kg or more in heating value. As to the RDF/LNG combination power generation, combinations of RDF200t/d + 25MW (capacity of gas turbine power generation) or RDF200t/d + 70MW seem to be appropriate. And, 30% or more of RDF power generation efficiency is made possible. In the study of economical efficiency, expenses born by local governments were calculated supposing that the difference between the unit price of power selling and that of power generation in power generation is born by RDF suppliers. As a result, the share becomes approximately 8,600-12,000 yen/refuse t in 15-year operation, and was found lower than that in the existing small-/medium-scale refuse incineration treatment. The combustion flue gas associated with the power generation business becomes approximately 300,000 Nm{sup 3}/h. The gas turbine fuel is natural gas, and RDF is good in combustibility. Therefore, the effect on the environment is expected to be small. (NEDO)

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Electronic information technology field - Human process ware technology field of the computer relation field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process ware gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the human process ware industry technology field of the computer relation field. The human process ware is a system aimed at fermenting human power for thinking, problem solution and creation. Its main subjects are the following three: close society technology for will communication by automatically learning backgrounds of people joining the community; topics community technology for community formation for the appropriate people/organizations by grasping true topics/purposes from conversation; active interaction technology for supporting creative activities of users/community and making conversation with users. Further, in the region of the technology to meet the requests/restrictions from the society, the following are expected: energy/resource conservation; realization of the life with ease/safety and of high quality in the aged society; realization of the advanced information network society which becomes the basis of a new economic society. (NEDO)

Achievement report for fiscal 1995 on the research and development of comprehensive basic technologies on marine resources (manganese nodule mining system) in industrial and scientific technology research and development project. Trends and forecasts of the supply-demand for metal resources (Ni, Co, Cu, Fe, Mn) that are contained in manganese nodules; 1995 nendo kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (mangan dankai saiko system) seika hokokusho. Mangan dankai ni kakawaru kinzoku shigen (Ni, Co, Cu, Fe, Mn) no kyokyu ni kansuru shorai doko no suitei

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

Living standards improving in developing countries especially in China are the most influential factor to determine the demand for Cu. Consumption of Ni will depend on the trends of advanced technologies such as Ni-hydrogen battery, fuel cell, shape memory alloy, hydrogen absorbing alloy, in addition to increase in global population and developing countries' living standards improvement. Co is far more dependent on advanced technologies than Ni is. On the land, Ni ore is increasingly lower in quality and Co is being retrieved from by-products of Cu production, both meeting the problem of unstable supply. Consideration is made to apply new extraction methods to Cu production; there are some potential resources for Fe and Mn. The Mn nodule exists in great quantities and is a attractive source of supply, but a long time will be required before it is exploited. It is necessary to speed up the study to exploit the Mn nodule, but first of all the problem of its competition with land resources in terms of cost has to be solved. It needs to be found out at what stage of production the Mn nodule is competitive with land products. In any case, Japan should undertake the efforts of marine resources exploitation leading other countries of the world. (NEDO)

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO (book on the handling / gas lift system). Report on the results of the R and D of the overall base technology of ocean resources (R and D of submarine oil drilling technology, etc.); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shine Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (kaitei sekiyu kussaku gijutsu nado kenkyu kaihatsu) seika hokokusho (handling / gas lift system hen)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper conducted a R and D on the handling of drilling equipment in drilling/collecting of submarine oil and the gas lift of artificial oil extraction technology. As to each equipment of a barge style handling system, conducted were assembly/adjustment/trial run on land and pipe handling experiments on sea. In the experiment, confirmed were pipe transfer function, lifting function, fitting function, grasping function, etc. In the ocean experiment, studied were pipe bending stress, Karman vortex control effects, etc. Relating to the gas lift system, experiments were made on confirmation of fabrication/performance of air compressor. Moreover, a technique of air transportation to the blowing inlet of the gas lift pipe was established by developing an air blowing system and fabricating a long-distance flexible pipe. Concerning the gas/liquid/solid three-phase separator, a cyclone separator was developed, and improvement in lifting efficiency was confirmed. Helped by these, the problems of the gas lift system were almost solved, and a possibility of the commercial-base production system was obtained. 2 refs., 182 figs., 47 tabs.