Tracking speckle displacement by double Kalman filtering
Institute of Scientific and Technical Information of China (English)
Donghui Li; Li Guo
2006-01-01
@@ A tracking technique using two sequentially-connected Kalman filter for tracking laser speckle displacement is presented. One Kalman filter tracks temporal speckle displacement, while another Kalman filter tracks spatial speckle displacement. The temporal Kalman filter provides a prior for the spatial Kalman filter, and the spatial Kalman filter provides measurements for the temporal Kalman filter. The contribution of a prior to estimations of the spatial Kalman filter is analyzed. An optical analysis system was set up to verify the double-Kalman-filter tracker's ability of tracking laser speckle's constant displacement.
Kalman Filter Based Tracking in an Video Surveillance System
Directory of Open Access Journals (Sweden)
SULIMAN, C.
2010-05-01
Full Text Available In this paper we have developed a Matlab/Simulink based model for monitoring a contact in a video surveillance sequence. For the segmentation process and corect identification of a contact in a surveillance video, we have used the Horn-Schunk optical flow algorithm. The position and the behavior of the correctly detected contact were monitored with the help of the traditional Kalman filter. After that we have compared the results obtained from the optical flow method with the ones obtained from the Kalman filter, and we show the correct functionality of the Kalman filter based tracking. The tests were performed using video data taken with the help of a fix camera. The tested algorithm has shown promising results.
A new Recommender system based on target tracking: a Kalman Filter approach
Nowakowski, Samuel; Boyer, Anne
2010-01-01
In this paper, we propose a new approach for recommender systems based on target tracking by Kalman filtering. We assume that users and their seen resources are vectors in the multidimensional space of the categories of the resources. Knowing this space, we propose an algorithm based on a Kalman filter to track users and to predict the best prediction of their future position in the recommendation space.
Target tracking in the recommender space: Toward a new recommender system based on Kalman filtering
Nowakowski, Samuel; Boyer, Anne
2010-01-01
In this paper, we propose a new approach for recommender systems based on target tracking by Kalman filtering. We assume that users and their seen resources are vectors in the multidimensional space of the categories of the resources. Knowing this space, we propose an algorithm based on a Kalman filter to track users and to predict the best prediction of their future position in the recommendation space.
Souza, André L. G.; Ishihara, João Y.; Ferreira, Henrique C.; Borges, Renato A.; Borges, Geovany A.
2016-12-01
The present work proposes a new approach for an antenna pointing system for satellite tracking. Such a system uses the received signal to estimate the beam pointing deviation and then adjusts the antenna pointing. The present work has two contributions. First, the estimation is performed by a Kalman filter based conical scan technique. This technique uses the Kalman filter avoiding the batch estimator and applies a mathematical manipulation avoiding the linearization approximations. Secondly, a control technique based on the model predictive control together with an explicit state feedback solution are obtained in order to reduce the computational burden. Numerical examples illustrate the results.
Kalman Filter Based Tracking in an Video Surveillance System
SULIMAN, C.; CRUCERU, C.; Moldoveanu, F.
2010-01-01
In this paper we have developed a Matlab/Simulink based model for monitoring a contact in a video surveillance sequence. For the segmentation process and corect identification of a contact in a surveillance video, we have used the Horn-Schunk optical flow algorithm. The position and the behavior of the correctly detected contact were monitored with the help of the traditional Kalman filter. After that we have compared the results obtained from the optical flow method with the ones obtaine...
Object Tracking System Using Approximate Median Filter, Kalman Filter and Dynamic Template Matching
Directory of Open Access Journals (Sweden)
G. Mallikarjuna Rao
2014-04-01
Full Text Available In this work, we dealt with the tracking of single object in a sequence of frames either from a live camera or a previously saved video. A moving object is detected frame-by-frame with high accuracy and efficiency using Median approximation technique. As soon as the object has been detected, the same is tracked by kalman filter estimation technique along with a more accurate Template Matching algorithm. The templates are dynamically generated for this purpose. This guarantees any change in object pose which does not be hindered from tracking procedure. The system is capable of handling entry and exit of an object. Such a tracking scheme is cost effective and it can be used as an automated video conferencing system and also has application as a surveillance tool. Several trials of the tracking show that the approach is correct and extremely fast, and it's a more robust performance throughout the experiments.
Kalman Filter Tracking on Parallel Architectures
Cerati, Giuseppe; Elmer, Peter; Lantz, Steven; McDermott, Kevin; Riley, Dan; Tadel, Matevž; Wittich, Peter; Würthwein, Frank; Yagil, Avi
2015-12-01
Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Example technologies today include Intel's Xeon Phi and GPGPUs. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High Luminosity LHC, for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques including Cellular Automata or returning to Hough Transform. The most common track finding techniques in use today are however those based on the Kalman Filter [2]. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust and are exactly those being used today for the design of the tracking system for HL-LHC. Our previous investigations showed that, using optimized data structures, track fitting with Kalman Filter can achieve large speedup both with Intel Xeon and Xeon Phi. We report here our further progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a realistic simulation setup.
Kalman Filter Tracking on Parallel Architectures
Directory of Open Access Journals (Sweden)
Cerati Giuseppe
2016-01-01
Full Text Available Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. In order to achieve the theoretical performance gains of these processors, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High-Luminosity Large Hadron Collider (HL-LHC, for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques such as Cellular Automata or Hough Transforms. The most common track finding techniques in use today, however, are those based on a Kalman filter approach. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust, and are in use today at the LHC. Given the utility of the Kalman filter in track finding, we have begun to port these algorithms to parallel architectures, namely Intel Xeon and Xeon Phi. We report here on our progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a simplified experimental environment.
Kalman Filter Tracking on Parallel Architectures
Cerati, Giuseppe; Elmer, Peter; Krutelyov, Slava; Lantz, Steven; Lefebvre, Matthieu; McDermott, Kevin; Riley, Daniel; Tadel, Matevž; Wittich, Peter; Würthwein, Frank; Yagil, Avi
2016-11-01
Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. In order to achieve the theoretical performance gains of these processors, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High-Luminosity Large Hadron Collider (HL-LHC), for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques such as Cellular Automata or Hough Transforms. The most common track finding techniques in use today, however, are those based on a Kalman filter approach. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust, and are in use today at the LHC. Given the utility of the Kalman filter in track finding, we have begun to port these algorithms to parallel architectures, namely Intel Xeon and Xeon Phi. We report here on our progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a simplified experimental environment.
Vehicle Tracking Using Kalman Filter and Features
Directory of Open Access Journals (Sweden)
Amir Salarpour
2011-09-01
Full Text Available Vehicle tracking has a wide variety of applications. The image resolution of the video available from most traffic camera system is low. In many cases for tracking multi object, distinguishing them from another isn’t easy because of their similarity. In this paper we describe a method, for tracking multiple objects, where the objects are vehicles. The number of vehicles is unknown and varies. We detect all moving objects, and for tracking of vehicle we use the kalman filter and color feature and distance of it from one frame to the next. So the method can distinguish and tracking all vehicles individually. The proposed algorithm can be applied to multiple moving objects.
Robust Optical User Motion Tracking Using a Kalman Filter
Dorfmüller-Ulhaas, Klaus
2007-01-01
Optical tracking has a great future in applications of virtual and augmented reality. It will assist to enhance the acceptance of virtual reality user interfaces, since optical tracking allows wireless interaction and precise tracking. Existing commercial motion capture systems are neither working reliably in real-time. Additionally, only few optical trackers can smooth and predict motion and include a motion estimator supplying similar results to the presented approach. A Kalman filter formu...
Kalman Filter Tracking on Parallel Architectures
Cerati, Giuseppe; Krutelyov, Slava; Lantz, Steven; Lefebvre, Matthieu; McDermott, Kevin; Riley, Daniel; Tadel, Matevz; Wittich, Peter; Wuerthwein, Frank; Yagil, Avi
2016-01-01
Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. To stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High-Luminosity Large Hadron Collider (HL-LHC), for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques such as Cellular Automata or Hough Transforms. The most common track finding techniques in use today, however, are those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector sy...
Robust tracking with spatio-velocity snakes: Kalman filtering approach
Energy Technology Data Exchange (ETDEWEB)
Peterfreund, N.
1998-12-31
Using results from robust Kalman filtering, we present a new Kalman filter-based snake model for tracking of nonrigid objects in combined spatio-velocity space. The proposed model is the stochastic version of the velocity snake, an active contour model for combined tracking of position and velocity of nonrigid boundaries. The proposed model uses image gradient and optical flow measurements along the contour as system measurements. An optical-flow based measurement error is used to detect and reject image measurements which correspond to image clutter or to other objects. The method was applied to object tracking of both rigid and nonrigid objects, resulting in good tracking results and robustness to image clutter, occlusions and numerical noise. 19 refs., 3 figs.
Robust tracking with spatio-velocity snakes: Kalman filtering approach
Energy Technology Data Exchange (ETDEWEB)
Peterfreund, N.
1997-06-01
Using results from robust Kalman filtering, the author presents a new Kalman filter-based snake model for tracking of nonrigid objects in combined spatio-velocity space. The proposed model is the stochastic version of the velocity snake, an active contour model for combined tracking of position and velocity of nonrigid boundaries. The proposed model uses image gradient and optical flow measurements along the contour as system measurements. An optical-flow based measurement error is used to detect and reject image measurements which correspond to image clutter or to other objects. The method was applied to object tracking of both rigid and nonrigid objects, resulting in good tracking results and robustness to image clutter, occlusions and numerical noise.
Kalman Filter Tracking on Parallel Architectures
Cerati, Giuseppe; Lantz, Steven; McDermott, Kevin; Riley, Dan; Tadel, Matevž; Wittich, Peter; Würthwein, Frank; Yagil, Avi
2015-01-01
Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Example technologies today include Intel's Xeon Phi and GPGPUs. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High Luminosity LHC, for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques including Cellular Automata or returning to Hough Transform. The most common track finding techniques in use today are however those based on the Kalman Filter. Significant experience has...
Directory of Open Access Journals (Sweden)
Zhang Lin Huan
2015-03-01
Full Text Available The aim of this research was to develop a safe human-driven and autonomous leader-follower tracking system for an autonomous tractor. To enable the tracking system, a laser range finder (LRF-based landmark detection system was designed to observe the relative position between a leader and a follower used in agricultural operations. The virtual follower-based formation-tracking algorithm was developed to minimize tracking errors and ensure safety. An extended Kalman filter (EKF was implemented for fusing LRF and odometry position to ensure stability of tracking in noisy farmland conditions. Simulations were conducted for tracking the leader in small and large sinusoidal curved paths. Simulated results verified high accuracy of formation tracking, stable velocity, and regulated steering angle of the follower. The tracking method confirmed the follower could follow the leader with a required formation safely and steadily in noisy conditions. The EKF helped to improve observation accuracy, velocity, and steering angle stability of the follower. As a result of the improved accuracy of observation and motion action, the tracking performance for lateral, longitudinal, and heading were also improved after the EKF was implemented in the tracking system.
Optimized object tracking technique using Kalman filter
Directory of Open Access Journals (Sweden)
Liana Ellen Taylor
2016-07-01
Full Text Available This paper focused on the design of an optimized object tracking technique which would minimize the processing time required in the object detection process while maintaining accuracy in detecting the desired moving object in a cluttered scene. A Kalman filter based cropped image is used for the image detection process as the processing time is significantly less to detect the object when a search window is used that is smaller than the entire video frame. This technique was tested with various sizes of the window in the cropping process. MATLAB® was used to design and test the proposed method. This paper found that using a cropped image with 2.16 multiplied by the largest dimension of the object resulted in significantly faster processing time while still providing a high success rate of detection and a detected center of the object that was reasonably close to the actual center.
Directory of Open Access Journals (Sweden)
Xuefen Zhu
2015-09-01
Full Text Available In a global positioning system receiver, the tracking algorithm plays a dominant role since the code delay and Doppler frequency shift need to be accurately estimated as well as their variation over time need to be continuously updated. Combine unscented Kalman filter (UKF with CM/CL signal to improve the signal tracking precision is proposed. It allow weighting assignment between CM code and CL code incoming signal, masked by a mass of noise, and to describe a UKF tracking loop aiming at decreasing numerical errors. UKF here involves state and measuring equations which calculate absolute offsets to adjust initial code and carrier phase then dramatically decrease the tracking error. In particular, the algorithm is implemented in both open space and jammed environment to highlight the advantages of tracking approach, by comparing single code and combined code, UKF and EKF tracking loop. It proves that signal tracking based on UKF, with low energy dissipation as well as high precision, is particularly appealing for a software receiver implementation.
Directory of Open Access Journals (Sweden)
Yibo Feng
2015-05-01
Full Text Available We present an adaptive algorithm for a system integrated with micro-electro-mechanical systems (MEMS gyroscopes and a compass to eliminate the influence from the environment, compensate the temperature drift precisely, and improve the accuracy of the MEMS gyroscope. We use a simplified drift model and changing but appropriate model parameters to implement this algorithm. The model of MEMS gyroscope temperature drift is constructed mostly on the basis of the temperature sensitivity of the gyroscope. As the state variables of a strong tracking Kalman filter (STKF, the parameters of the temperature drift model can be calculated to adapt to the environment under the support of the compass. These parameters change intelligently with the environment to maintain the precision of the MEMS gyroscope in the changing temperature. The heading error is less than 0.6° in the static temperature experiment, and also is kept in the range from 5° to −2° in the dynamic outdoor experiment. This demonstrates that the proposed algorithm exhibits strong adaptability to a changing temperature, and performs significantly better than KF and MLR to compensate the temperature drift of a gyroscope and eliminate the influence of temperature variation.
Feng, Yibo; Li, Xisheng; Zhang, Xiaojuan
2015-05-13
We present an adaptive algorithm for a system integrated with micro-electro-mechanical systems (MEMS) gyroscopes and a compass to eliminate the influence from the environment, compensate the temperature drift precisely, and improve the accuracy of the MEMS gyroscope. We use a simplified drift model and changing but appropriate model parameters to implement this algorithm. The model of MEMS gyroscope temperature drift is constructed mostly on the basis of the temperature sensitivity of the gyroscope. As the state variables of a strong tracking Kalman filter (STKF), the parameters of the temperature drift model can be calculated to adapt to the environment under the support of the compass. These parameters change intelligently with the environment to maintain the precision of the MEMS gyroscope in the changing temperature. The heading error is less than 0.6° in the static temperature experiment, and also is kept in the range from 5° to -2° in the dynamic outdoor experiment. This demonstrates that the proposed algorithm exhibits strong adaptability to a changing temperature, and performs significantly better than KF and MLR to compensate the temperature drift of a gyroscope and eliminate the influence of temperature variation.
INFLUENCE OF STOCHASTIC NOISE STATISTICS ON KALMAN FILTER PERFORMANCE BASED ON VIDEO TARGET TRACKING
Institute of Scientific and Technical Information of China (English)
Chen Ken; Napolitano; Zhang Yun; Li Dong
2010-01-01
The system stochastic noises involved in Kalman filtering are preconditioned on being ideally white and Gaussian distributed. In this research,efforts are exerted on exploring the influence of the noise statistics on Kalman filtering from the perspective of video target tracking quality. The correlation of tracking precision to both the process and measurement noise covariance is investigated; the signal-to-noise power density ratio is defined; the contribution of predicted states and measured outputs to Kalman filter behavior is discussed; the tracking precision relative sensitivity is derived and applied in this study case. The findings are expected to pave the way for future study on how the actual noise statistics deviating from the assumed ones impacts on the Kalman filter optimality and degradation in the application of video tracking.
Modified Extended Kalman Filtering for Tracking with Insufficient and Intermittent Observations
Directory of Open Access Journals (Sweden)
Pengpeng Chen
2015-01-01
Full Text Available This paper is concerned with the Kalman filtering problem for tracking a single target on the fixed-topology wireless sensor networks (WSNs. Both the insufficient anchor coverage and the packet dropouts have been taken into consideration in the filter design. The resulting tracking system is modeled as a multichannel nonlinear system with multiplicative noise. Noting that the channels may be correlated with each other, we use a general matrix to express the multiplicative noise. Then, a modified extended Kalman filtering algorithm is presented based on the obtained model to achieve high tracking accuracy. In particular, we evaluate the effect of various parameters on the tracking performance through simulation studies.
Unscented Kalman filtering for articulated human tracking
DEFF Research Database (Denmark)
Boesen Lindbo Larsen, Anders; Hauberg, Søren; Pedersen, Kim Steenstrup
2011-01-01
We present an articulated tracking system working with data from a single narrow baseline stereo camera. The use of stereo data allows for some depth disambiguation, a common issue in articulated tracking, which in turn yields likelihoods that are practically unimodal. While current state...... with superior results. Tracking quality is measured by comparing with ground truth data from a marker-based motion capture system....
Kalman Filter Track Fits and Track Breakpoint Analysis
Astier, Pierre; Cousins, R D; Letessier-Selvon, A A; Popov, B A; Vinogradova, T G; Astier, Pierre; Cardini, Alessandro; Cousins, Robert D.; Letessier-Selvon, Antoine; Popov, Boris A.; Vinogradova, Tatiana
2000-01-01
We give an overview of track fitting using the Kalman filter method in the NOMAD detector at CERN, and emphasize how the wealth of by-product information can be used to analyze track breakpoints (discontinuities in track parameters caused by scattering, decay, etc.). After reviewing how this information has been previously exploited by others, we describe extensions which add power to breakpoint detection and characterization. We show how complete fits to the entire track, with breakpoint parameters added, can be easily obtained from the information from unbroken fits. Tests inspired by the Fisher F-test can then be used to judge breakpoints. Signed quantities (such as change in momentum at the breakpoint) can supplement unsigned quantities such as the various chisquares. We illustrate the method with electrons from real data, and with Monte Carlo simulations of pion decays.
Strong tracking adaptive Kalman filters for underwater vehicle dead reckoning
Institute of Scientific and Technical Information of China (English)
XIAO Kun; FANG Shao-ji; PANG Yong-jie
2007-01-01
To improve underwater vehicle dead reckoning, a developed strong tracking adaptive kalman filter is proposed. The filter is improved with an additional adaptive factor and an estimator of measurement noise covariance. Since the magnitude of fading factor is changed adaptively, the tracking ability of the filter is still enhanced in low velocity condition of underwater vehicles. The results of simulation tests prove the presented filter effective.
Face Tracking in Video by Using Kalman Filter
Directory of Open Access Journals (Sweden)
Saranya M
2014-06-01
Full Text Available Face Tracking has been one of the most studied topics in computer vision literature. Facial feature extraction has some problems which must be researched. Small variations of face size and orientation can affect the result of face tracking. Since the input image is captured from a surveillance camera, certain conditions have to be considered - like different levels of brightness, shadows and clearness - which are challenges for detection and tracking purpose. Most facial feature extraction methods are sensitive to various non-ideal such as variation in illumination, noise, orientation, time-consumption and color space used. So there is a need for a good feature extraction method that will enhance the quality and performance of face recognition system. First, segmentation of foreground and background object is the one by using histogram equalization. By this method we are able to segment face based on skin color. After segmenting, Kalman filter is used to track the faces under several conditions. This feature is helpful for the development of a real-time visual tracking control system.
Adaptive Federal Kalman Filtering for SINS/GPS Integrated System
Institute of Scientific and Technical Information of China (English)
杨勇; 缪玲娟
2003-01-01
A new adaptive federal Kalman filter for a strapdown integrated navigation system/global positioning system (SINS/GPS) is given. The developed federal Kalman filter is based on the trace operation of parameters estimation's error covariance matrix and the spectral radius of update measurement noise variance-covariance matrix for the proper choice of the filter weight and hence the filter gain factors. Theoretical analysis and results from simulation in which the SINS/GPS was compared to conventional Kalman filter are presented. Results show that the algorithm of this adaptive federal Kalman filter is simpler than that of the conventional one. Furthermore, it outperforms the conventional Kalman filter when the system is undertaken measurement malfunctions because of its possession of adaptive ability. This filter can be used in the vehicle integrated navigation system.
Three-dimensional motion tracking by Kalman filtering
Gao, Jean; Kosaka, Akio; Kak, Avinash C.
2000-10-01
In this paper, a 3D semantic object motion tracking method based on Kalman filtering is proposed. First, we use a specially designed Color Image Segmentation Editor (CISE) to devise shapes that more accurately describe the object to be tracked. CISE is an integration of edge and region detection, which is based on edge-linking, split-and-merge and the energy minimization for active contour detection. An ROI is further segmented into single motion blobs by considering the constancy of the motion parameters in each blob. Over short time intervals, each blob can be tracked separately and, over longer times, the blobs can be allowed to fragment and coalesce into new blobs as motion evolves. The tracking of each blob is based on a Kalman filter derived from linearization of a constraint equation satisfied by the pinhole model of a camera. The Kalman filter allows the tracker to project the uncertainties associated with a blob center (or with the coordinates of any other features) into the next frame. This projected uncertainty region can then be searched rot eh pixels belonging to the blob. Future work includes investigation of the effects of illumination changes and simultaneous tracking of multiple targets.
Kalman filter based data fusion for neutral axis tracking in wind turbine towers
DEFF Research Database (Denmark)
Soman, Rohan; Malinowski, Pawel; Ostachowicz, Wieslaw;
2015-01-01
downtime, hence increasing the availability of the system. The present work is based on the use of neutral axis (NA) for SHM of the structure. The NA is tracked by data fusion of measured yaw angle and strain through the use of Extended Kalman Filter (EKF). The EKF allows accurate tracking even...
Energy Technology Data Exchange (ETDEWEB)
Lemanski, W.J.
1989-03-01
The success of the Strategic Defense Initiative depends directly on significant advances in both computer hardware and software development technologies. Parallel architectures and the Ada programming language have advantages that make them candidates for use in SDI command and control computer systems. This thesis examines those advantages in the context of an SDI-type application: implementation of a Kalman-filter tracking system. This research consists of three parts. The first is a set of software engineering guidelines developed for use in creating parallel designs suitable for implementation in Ada. These guidelines cover the design process from initial problem analysis to final detailed design. Methods of problem decomposition are discussed, as are language partitioning strategies. Justification is provided for using the Ada task construct for process boundaries, and Ada multitasking design issues are reviewed. A parallel software design methodology is also described.
Subspace System Identification of the Kalman Filter
Directory of Open Access Journals (Sweden)
David Di Ruscio
2003-07-01
Full Text Available Some proofs concerning a subspace identification algorithm are presented. It is proved that the Kalman filter gain and the noise innovations process can be identified directly from known input and output data without explicitly solving the Riccati equation. Furthermore, it is in general and for colored inputs, proved that the subspace identification of the states only is possible if the deterministic part of the system is known or identified beforehand. However, if the inputs are white, then, it is proved that the states can be identified directly. Some alternative projection matrices which can be used to compute the extended observability matrix directly from the data are presented. Furthermore, an efficient method for computing the deterministic part of the system is presented. The closed loop subspace identification problem is also addressed and it is shown that this problem is solved and unbiased estimates are obtained by simply including a filter in the feedback. Furthermore, an algorithm for consistent closed loop subspace estimation is presented. This algorithm is using the controller parameters in order to overcome the bias problem.
3D hand tracking using Kalman filter in depth space
Park, Sangheon; Yu, Sunjin; Kim, Joongrock; Kim, Sungjin; Lee, Sangyoun
2012-12-01
Hand gestures are an important type of natural language used in many research areas such as human-computer interaction and computer vision. Hand gestures recognition requires the prior determination of the hand position through detection and tracking. One of the most efficient strategies for hand tracking is to use 2D visual information such as color and shape. However, visual-sensor-based hand tracking methods are very sensitive when tracking is performed under variable light conditions. Also, as hand movements are made in 3D space, the recognition performance of hand gestures using 2D information is inherently limited. In this article, we propose a novel real-time 3D hand tracking method in depth space using a 3D depth sensor and employing Kalman filter. We detect hand candidates using motion clusters and predefined wave motion, and track hand locations using Kalman filter. To verify the effectiveness of the proposed method, we compare the performance of the proposed method with the visual-based method. Experimental results show that the performance of the proposed method out performs visual-based method.
Unscented Kalman filters for polarization state tracking and phase noise mitigation.
Jignesh, Jokhakar; Corcoran, Bill; Zhu, Chen; Lowery, Arthur
2016-09-19
Simultaneous polarization and phase noise tracking and compensation is proposed based on an unscented Kalman filter (UKF). We experimentally demonstrate the tracking under noise-loading and after 800-km single-mode fiber transmission with 20-Gbaud QPSK and 16-QAM signals. These experiments show that the proposed UKF outperforms both conventional blind tracing algorithms and a previously proposed extended Kalman filter, at the cost of higher complexity. Additionally, we propose and test modified Kalman filter algorithms to reduce computational complexity.
Secure Tracking in Sensor Networks using Adaptive Extended Kalman Filter
Fard, Ali P
2012-01-01
Location information of sensor nodes has become an essential part of many applications in Wireless Sensor Networks (WSN). The importance of location estimation and object tracking has made them the target of many security attacks. Various methods have tried to provide location information with high accuracy, while lots of them have neglected the fact that WSNs may be deployed in hostile environments. In this paper, we address the problem of securely tracking a Mobile Node (MN) which has been noticed very little previously. A novel secure tracking algorithm is proposed based on Extended Kalman Filter (EKF) that is capable of tracking a Mobile Node (MN) with high resolution in the presence of compromised or colluding malicious beacon nodes. It filters out and identifies the malicious beacon data in the process of tracking. The proposed method considerably outperforms the previously proposed secure algorithms in terms of either detection rate or MSE. The experimental data based on different settings for the netw...
Alignment of the LHCb detector with Kalman filter fitted tracks
Amoraal, J M
2009-01-01
The LHCb detector, operating at the Large Hadron Collider at CERN, is a single arm spectrometer optimised for the detection of forward b and anti-b production for b physics studies. The reconstruction of vertices and tracks is done by silicon micro-strip and gaseous straw-tube based detectors. To obtain excellent momentum, mass and vertex resolutions, the detectors need to be aligned well within the hit resolution for a given detector. We present a general and easy to configure alignment framework which uses the closed from method of alignment with Kalman filter fitted tracks to determine the alignment parameters. This allows us to use the standard LHCb track model and fit, and correctly take complexities such as multiple scattering and energy loss corrections into account. With this framework it is possible to align any detector for any degree of freedom.
DEFF Research Database (Denmark)
Khazraj, Hesam; Silva, Filipe Miguel Faria da; Bak, Claus Leth
2016-01-01
Dynamic State Estimation (DSE) is a critical tool for analysis, monitoring and planning of a power system. The concept of DSE involves designing state estimation with Extended Kalman Filter (EKF) or Unscented Kalman Filter (UKF) methods, which can be used by wide area monitoring to improve...... the stability of power system. State estimation with EKF and UKF methods can be used for monitoring and estimating the dynamic state variables of multi-machine power systems, which are generator rotor speed and rotor angle. This paper uses Powerfactory to solve power flow analysis of simulations, then a non......-linear state estimator is developed in MatLab to solve states by applying the unscented Kalman filter (UKF) and Extended Kalman Filter (EKF) algorithm. Finally, a DSE model is built for a 14 bus power system network to evaluate the proposed algorithm for the networks.This article will focus on comparing...
RSSI based indoor tracking in sensor networks using Kalman filters
DEFF Research Database (Denmark)
Tøgersen, Frede Aakmann; Skjøth, Flemming; Munksgaard, Lene;
2010-01-01
We propose an algorithm for estimating positions of devices in a sensor network using Kalman filtering techniques. The specific area of application is monitoring the movements of cows in a barn. The algorithm consists of two filters. The first filter enhances the signal-to-noise ratio...... of the observed signal strengths and gives interpolated values at specific timestamps. Information from the first filter is transferred to the second filter which estimates the positions. Methods for estimating the parameters of the filters are given and these provide a straightforward calibration of the system...
Power system static state estimation using Kalman filter algorithm
Directory of Open Access Journals (Sweden)
Saikia Anupam
2016-01-01
Full Text Available State estimation of power system is an important tool for operation, analysis and forecasting of electric power system. In this paper, a Kalman filter algorithm is presented for static estimation of power system state variables. IEEE 14 bus system is employed to check the accuracy of this method. Newton Raphson load flow study is first carried out on our test system and a set of data from the output of load flow program is taken as measurement input. Measurement inputs are simulated by adding Gaussian noise of zero mean. The results of Kalman estimation are compared with traditional Weight Least Square (WLS method and it is observed that Kalman filter algorithm is numerically more efficient than traditional WLS method. Estimation accuracy is also tested for presence of parametric error in the system. In addition, numerical stability of Kalman filter algorithm is tested by considering inclusion of zero mean errors in the initial estimates.
Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Processors and GPUs
Cerati, Giuseppe; Elmer, Peter; Krutelyov, Slava; Lantz, Steven; Lefebvre, Matthieu; Masciovecchio, Mario; McDermott, Kevin; Riley, Daniel; Tadel, Matevž; Wittich, Peter; Würthwein, Frank; Yagil, Avi
2017-08-01
For over a decade now, physical and energy constraints have limited clock speed improvements in commodity microprocessors. Instead, chipmakers have been pushed into producing lower-power, multi-core processors such as Graphical Processing Units (GPU), ARM CPUs, and Intel MICs. Broad-based efforts from manufacturers and developers have been devoted to making these processors user-friendly enough to perform general computations. However, extracting performance from a larger number of cores, as well as specialized vector or SIMD units, requires special care in algorithm design and code optimization. One of the most computationally challenging problems in high-energy particle experiments is finding and fitting the charged-particle tracks during event reconstruction. This is expected to become by far the dominant problem at the High-Luminosity Large Hadron Collider (HL-LHC), for example. Today the most common track finding methods are those based on the Kalman filter. Experience with Kalman techniques on real tracking detector systems has shown that they are robust and provide high physics performance. This is why they are currently in use at the LHC, both in the trigger and offine. Previously we reported on the significant parallel speedups that resulted from our investigations to adapt Kalman filters to track fitting and track building on Intel Xeon and Xeon Phi. Here, we discuss our progresses toward the understanding of these processors and the new developments to port the Kalman filter to NVIDIA GPUs.
Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Processors and GPUs
Directory of Open Access Journals (Sweden)
Cerati Giuseppe
2017-01-01
Full Text Available For over a decade now, physical and energy constraints have limited clock speed improvements in commodity microprocessors. Instead, chipmakers have been pushed into producing lower-power, multi-core processors such as Graphical Processing Units (GPU, ARM CPUs, and Intel MICs. Broad-based efforts from manufacturers and developers have been devoted to making these processors user-friendly enough to perform general computations. However, extracting performance from a larger number of cores, as well as specialized vector or SIMD units, requires special care in algorithm design and code optimization. One of the most computationally challenging problems in high-energy particle experiments is finding and fitting the charged-particle tracks during event reconstruction. This is expected to become by far the dominant problem at the High-Luminosity Large Hadron Collider (HL-LHC, for example. Today the most common track finding methods are those based on the Kalman filter. Experience with Kalman techniques on real tracking detector systems has shown that they are robust and provide high physics performance. This is why they are currently in use at the LHC, both in the trigger and offine. Previously we reported on the significant parallel speedups that resulted from our investigations to adapt Kalman filters to track fitting and track building on Intel Xeon and Xeon Phi. Here, we discuss our progresses toward the understanding of these processors and the new developments to port the Kalman filter to NVIDIA GPUs.
Nonlinear dynamical system identification using unscented Kalman filter
Rehman, M. Javvad ur; Dass, Sarat Chandra; Asirvadam, Vijanth Sagayan
2016-11-01
Kalman Filter is the most suitable choice for linear state space and Gaussian error distribution from decades. In general practical systems are not linear and Gaussian so these assumptions give inconsistent results. System Identification for nonlinear dynamical systems is a difficult task to perform. Usually, Extended Kalman Filter (EKF) is used to deal with non-linearity in which Jacobian method is used for linearizing the system dynamics, But it has been observed that in highly non-linear environment performance of EKF is poor. Unscented Kalman Filter (UKF) is proposed here as a better option because instead of analytical linearization of state space, UKF performs statistical linearization by using sigma point calculated from deterministic samples. Formation of the posterior distribution is based on the propagation of mean and covariance through sigma points.
Tracking whole hand kinematics using extended Kalman filter.
Fu, Qiushi; Santello, Marco
2010-01-01
This paper describes the general procedure, model construction, and experimental results of tracking whole hand kinematics using extended Kalman filter (EKF) based on data recorded from active surface markers. We used a hand model with 29 degrees of freedom that consists of hand global posture, wrist, and digits. The marker protocol had 4 markers on the distal forearm and 20 markers on the dorsal surface of the joints of the digits. To reduce computational load, we divided the state space into four sub-spaces, each of which were estimated with an EKF in a specific order. We tested our framework and found reasonably accurate results (2-4 mm tip position error) when sampling tip to tip pinch at 120 Hz.
Adaptive system noise covariance for performance enhancement of Kalman filter-based algorithms
Lee, Vika; Chan, Keith C. C.; Leung, Henry
1996-06-01
Several designs of Kalman filters and the interacting multiple models algorithm were used in real tracking tasks involving high dynamic targets. The data were obtained through the joint effort of the defense departments of Canada and the US. Their performance, measured in terms of positional deviation and the number of track losses, are rather unsatisfactory even though they perform particularly well when using simulated data. To identify the reasons behind, we compared and analyzed the differences between the model assumptions behind the design of these Kalman filters and the model required for accurate tracking of these targets. In this paper, we discussed our findings. Moreover, based on the characteristics of real tracking data, we present an alternative methodology for measuring the effectiveness of various Kalman filter based trackers in stressful environmental. It can also be used to explain the well known characteristics of Kalman filter. A lower bound for the deviation, obtained from this equation, shows that deviation could be too large to manage if noise bandwidth is as high as the real data instead of a pre-assumed magnitude. Instead of having to redesign many existing Kalman filters to suit for stressful environment, we developed a design-independent module that can be added to different types of Kalman filters based trackers to enhance their performance in the tracking high dynamic targets. The module is called adaptive systems noise covariance estimation. It is not only safe (i.e. almost no negative effect) but it can sometimes even double the performance of trackers in stressful environment.
Li, Jing; Song, Ningfang; Yang, Gongliu; Jiang, Rui
2016-07-01
In the initial alignment process of strapdown inertial navigation system (SINS), large misalignment angles always bring nonlinear problem, which can usually be processed using the scaled unscented Kalman filter (SUKF). In this paper, the problem of large misalignment angles in SINS alignment is further investigated, and the strong tracking scaled unscented Kalman filter (STSUKF) is proposed with fixed parameters to improve convergence speed, while these parameters are artificially constructed and uncertain in real application. To further improve the alignment stability and reduce the parameters selection, this paper proposes a fuzzy adaptive strategy combined with STSUKF (FUZZY-STSUKF). As a result, initial alignment scheme of large misalignment angles based on FUZZY-STSUKF is designed and verified by simulations and turntable experiment. The results show that the scheme improves the accuracy and convergence speed of SINS initial alignment compared with those based on SUKF and STSUKF.
Li, Jing; Song, Ningfang; Yang, Gongliu; Jiang, Rui
2016-07-01
In the initial alignment process of strapdown inertial navigation system (SINS), large misalignment angles always bring nonlinear problem, which can usually be processed using the scaled unscented Kalman filter (SUKF). In this paper, the problem of large misalignment angles in SINS alignment is further investigated, and the strong tracking scaled unscented Kalman filter (STSUKF) is proposed with fixed parameters to improve convergence speed, while these parameters are artificially constructed and uncertain in real application. To further improve the alignment stability and reduce the parameters selection, this paper proposes a fuzzy adaptive strategy combined with STSUKF (FUZZY-STSUKF). As a result, initial alignment scheme of large misalignment angles based on FUZZY-STSUKF is designed and verified by simulations and turntable experiment. The results show that the scheme improves the accuracy and convergence speed of SINS initial alignment compared with those based on SUKF and STSUKF.
Chen, Xiyuan; Wang, Xiying; Xu, Yuan
2014-12-09
This paper deals with the problem of state estimation for the vector-tracking loop of a software-defined Global Positioning System (GPS) receiver. For a nonlinear system that has the model error and white Gaussian noise, a noise statistics estimator is used to estimate the model error, and based on this, a modified iterated extended Kalman filter (IEKF) named adaptive iterated Kalman filter (AIEKF) is proposed. A vector-tracking GPS receiver utilizing AIEKF is implemented to evaluate the performance of the proposed method. Through road tests, it is shown that the proposed method has an obvious accuracy advantage over the IEKF and Adaptive Extended Kalman filter (AEKF) in position determination. The results show that the proposed method is effective to reduce the root-mean-square error (RMSE) of position (including longitude, latitude and altitude). Comparing with EKF, the position RMSE values of AIEKF are reduced by about 45.1%, 40.9% and 54.6% in the east, north and up directions, respectively. Comparing with IEKF, the position RMSE values of AIEKF are reduced by about 25.7%, 19.3% and 35.7% in the east, north and up directions, respectively. Compared with AEKF, the position RMSE values of AIEKF are reduced by about 21.6%, 15.5% and 30.7% in the east, north and up directions, respectively.
Fuzzy Adaptive Cubature Kalman Filter for Integrated Navigation Systems
Directory of Open Access Journals (Sweden)
Chien-Hao Tseng
2016-07-01
Full Text Available This paper presents a sensor fusion method based on the combination of cubature Kalman filter (CKF and fuzzy logic adaptive system (FLAS for the integrated navigation systems, such as the GPS/INS (Global Positioning System/inertial navigation system integration. The third-degree spherical-radial cubature rule applied in the CKF has been employed to avoid the numerically instability in the system model. In processing navigation integration, the performance of nonlinear filter based estimation of the position and velocity states may severely degrade caused by modeling errors due to dynamics uncertainties of the vehicle. In order to resolve the shortcoming for selecting the process noise covariance through personal experience or numerical simulation, a scheme called the fuzzy adaptive cubature Kalman filter (FACKF is presented by introducing the FLAS to adjust the weighting factor of the process noise covariance matrix. The FLAS is incorporated into the CKF framework as a mechanism for timely implementing the tuning of process noise covariance matrix based on the information of degree of divergence (DOD parameter. The proposed FACKF algorithm shows promising accuracy improvement as compared to the extended Kalman filter (EKF, unscented Kalman filter (UKF, and CKF approaches.
Fuzzy Adaptive Cubature Kalman Filter for Integrated Navigation Systems.
Tseng, Chien-Hao; Lin, Sheng-Fuu; Jwo, Dah-Jing
2016-07-26
This paper presents a sensor fusion method based on the combination of cubature Kalman filter (CKF) and fuzzy logic adaptive system (FLAS) for the integrated navigation systems, such as the GPS/INS (Global Positioning System/inertial navigation system) integration. The third-degree spherical-radial cubature rule applied in the CKF has been employed to avoid the numerically instability in the system model. In processing navigation integration, the performance of nonlinear filter based estimation of the position and velocity states may severely degrade caused by modeling errors due to dynamics uncertainties of the vehicle. In order to resolve the shortcoming for selecting the process noise covariance through personal experience or numerical simulation, a scheme called the fuzzy adaptive cubature Kalman filter (FACKF) is presented by introducing the FLAS to adjust the weighting factor of the process noise covariance matrix. The FLAS is incorporated into the CKF framework as a mechanism for timely implementing the tuning of process noise covariance matrix based on the information of degree of divergence (DOD) parameter. The proposed FACKF algorithm shows promising accuracy improvement as compared to the extended Kalman filter (EKF), unscented Kalman filter (UKF), and CKF approaches.
Alternatives to an extended Kalman Filter for target image tracking
Leuthauser, P. R.
1981-12-01
Four alternative filters are compared to an extended Kalman filter (EKF) algorithm for tracking a distributed (elliptical) source target in a closed loop tracking problem, using outputs from a forward looking (FLIR) sensor as measurements. These were (1) an EKF with (second order) bias correction term, (2) a constant gain EKF, (3) a constant gain EKF with bias correction term, and (4) a statistically linearized filter. Estimates are made of both actual target motion and of apparent motion due to atmospheric jitter. These alternative designs are considered specifically to address some of the significant biases exhibited by an EKF due to initial acquisition difficulties, unmodelled maneuvering by the target, low signal-to-noise ratio, and real world conditions varying significantly from those assumed in the filter design (robustness). Filter performance was determined with a Monte Carlo study under both ideal and non ideal conditions for tracking targets on a constant velocity cross range path, and during constant acceleration turns of 5G, 10G, and 20G.
DEFF Research Database (Denmark)
Wang, Yunlong; Soltani, Mohsen; Hussain, Dil muhammed Akbar
2016-01-01
Satellite tracking is a challenging task for marine applications due to the disturbance from ocean waves. An Attitude Heading and Reference System (AHRS) for measuring ship attitude, based on Microelectromechanical Systems (MEMS) sensors, is a key part for satellite tracking. In this paper......, an adaptive Multiplicative Extended Kalman Filter (MEKF) for attitude estimation of Marine Satellite Tracking Antenna (MSTA) is presented with the measurement noise covariance matrix adjusted according to the norm of accelerometer measurements, which can significantly reduce the slamming influence from waves...
Kalman Filtering with Real-Time Applications
Chui, Charles K
2009-01-01
Kalman Filtering with Real-Time Applications presents a thorough discussion of the mathematical theory and computational schemes of Kalman filtering. The filtering algorithms are derived via different approaches, including a direct method consisting of a series of elementary steps, and an indirect method based on innovation projection. Other topics include Kalman filtering for systems with correlated noise or colored noise, limiting Kalman filtering for time-invariant systems, extended Kalman filtering for nonlinear systems, interval Kalman filtering for uncertain systems, and wavelet Kalman filtering for multiresolution analysis of random signals. Most filtering algorithms are illustrated by using simplified radar tracking examples. The style of the book is informal, and the mathematics is elementary but rigorous. The text is self-contained, suitable for self-study, and accessible to all readers with a minimum knowledge of linear algebra, probability theory, and system engineering.
Tracking and Data Relay Satellite (TDRS) Orbit Estimation Using an Extended Kalman Filter
Ward, Douglas T.; Dang, Ket D.; Slojkowski, Steve; Blizzard, Mike; Jenkins, Greg
2007-01-01
Alternatives to the Tracking and Data Relay Satellite (TDRS) orbit estimation procedure were studied to develop a technique that both produces more reliable results and is more amenable to automation than the prior procedure. The Earth Observing System (EOS) Terra mission has TDRS ephemeris prediction 3(sigma) requirements of 75 meters in position and 5.5 millimeters per second in velocity over a 1.5-day prediction span. Meeting these requirements sometimes required reruns of the prior orbit determination (OD) process, with manual editing of tracking data to get an acceptable solution. After a study of the available alternatives, the Flight Dynamics Facility (FDF) began using the Real-Time Orbit Determination (RTOD(Registered TradeMark)) Kalman filter program for operational support of TDRSs in February 2007. This extended Kalman filter (EKF) is used for daily support, including within hours after most thrusting, to estimate the spacecraft position, velocity, and solar radiation coefficient of reflectivity (C(sub R)). The tracking data used are from the Bilateration Ranging Transponder System (BRTS), selected TDRS System (TDRSS) User satellite tracking data, and Telemetry, Tracking, and Command (TT&C) data. Degraded filter results right after maneuvers and some momentum unloads provided incentive for a hybrid OD technique. The results of combining EKF strengths with the Goddard Trajectory Determination System (GTDS) Differential Correction (DC) program batch-least-squares solutions, as recommended in a 2005 paper on the chain-bias technique, are also presented.
Kalman filtering with real-time applications
Chui, Charles K
2017-01-01
This new edition presents a thorough discussion of the mathematical theory and computational schemes of Kalman filtering. The filtering algorithms are derived via different approaches, including a direct method consisting of a series of elementary steps, and an indirect method based on innovation projection. Other topics include Kalman filtering for systems with correlated noise or colored noise, limiting Kalman filtering for time-invariant systems, extended Kalman filtering for nonlinear systems, interval Kalman filtering for uncertain systems, and wavelet Kalman filtering for multiresolution analysis of random signals. Most filtering algorithms are illustrated by using simplified radar tracking examples. The style of the book is informal, and the mathematics is elementary but rigorous. The text is self-contained, suitable for self-study, and accessible to all readers with a minimum knowledge of linear algebra, probability theory, and system engineering. Over 100 exercises and problems with solutions help de...
LHCb: Alignment of the LHCb Detector with Kalman Filter Fitted Tracks
Amoraal, J; Hulsbergen, W; Needham, M; Nicolas, L; Pozzi, S; Raven, G; Vecchi, S
2009-01-01
We report on an implementation of a global chisquare algorithm for the simultaneous alignment of all tracking systems in the LHCb detector. Our algorithm uses hit residuals from the standard LHCb track fit which is based on a Kalman filter. The algorithm is implemented in the LHCb reconstruction framework and exploits the fact that all sensitive detector elements have the same geometry interface. A vertex constraint is implemented by fitting tracks to a common point and propagating the change in track parameters to the hit residuals. To remove unconstrained or poorly constrained degrees of freedom (so-called weak modes) the average movements of (subsets of) alignable detector elements can be fixed with Lagrange constraints. Alternatively, weak modes can be removed with a cutoff in the eigenvalue spectrum of the second derivative of the chisquare. As for all LHCb reconstruction and analysis software the configuration of the algorithm is done in python and gives detailed control over the selection of alignable ...
Kalman filtering for time-delayed linear systems
Institute of Scientific and Technical Information of China (English)
LU Xiao; WANG Wei
2006-01-01
This paper is to study the linear minimum variance estimation for discrete- time systems. A simple approach to the problem is presented by developing re-organized innovation analysis for the systems with instantaneous and double time-delayed measurements. It is shown that the derived estimator involves solving three different standard Kalman filtering with the same dimension as the original system. The obtained results form the basis for solving some complicated problems such as H∞ fixed-lag smoothing, preview control, H∞ filtering and control with time delays.
Wang, Xudong; Syrmos, Vassilis L.
2004-07-01
In this paper, an adaptive reconfigurable control system based on extended Kalman filter approach and eigenstructure assignments is proposed. System identification is carried out using an extended Kalman filter (EKF) approach. An eigenstructure assignment (EA) technique is applied for reconfigurable feedback control law design to recover the system dynamic performance. The reconfigurable feedforward controllers are designed to achieve the steady-state tracking using input weighting approach. The proposed scheme can identify not only actuator and sensor variations, but also changes in the system structures using the extended Kalman filtering method. The overall design is robust with respect to uncertainties in the state-space matrices of the reconfigured system. To illustrate the effectiveness of the proposed reconfigurable control system design technique, an aircraft longitudinal vertical takeoff and landing (VTOL) control system is used to demonstrate the reconfiguration procedure.
General formulation of process noise matrix for track fitting with Kalman filter
Bhattacharya, Kolahal; Mondal, Naba K
2015-01-01
In the context of track fitting problems by a Kalman filter, the general functional forms of the elements of the random noise matrix are derived for tracking through thick layers of materials and magnetic fields. This work generalizes the form of the random noise matrix obtained by Mankel[1].
Model Predictive Control Based on Kalman Filter for Constrained Hammerstein-Wiener Systems
Directory of Open Access Journals (Sweden)
Man Hong
2013-01-01
Full Text Available To precisely track the reactor temperature in the entire working condition, the constrained Hammerstein-Wiener model describing nonlinear chemical processes such as in the continuous stirred tank reactor (CSTR is proposed. A predictive control algorithm based on the Kalman filter for constrained Hammerstein-Wiener systems is designed. An output feedback control law regarding the linear subsystem is derived by state observation. The size of reaction heat produced and its influence on the output are evaluated by the Kalman filter. The observation and evaluation results are calculated by the multistep predictive approach. Actual control variables are computed while considering the constraints of the optimal control problem in a finite horizon through the receding horizon. The simulation example of the CSTR tester shows the effectiveness and feasibility of the proposed algorithm.
Kalman filter based data fusion for neutral axis tracking in wind turbine towers
DEFF Research Database (Denmark)
Soman, Rohan; Malinowski, Pawel; Ostachowicz, Wieslaw
2015-01-01
availability. Maintenance costs may be lowered and the high availability and low repair costs ensured through the use of condition monitoring (CM) and structural health monitoring (SHM). SHM allows early detection of damage and allows maintenance planning. Furthermore, it can allow us to avoid unnecessary...... downtime, hence increasing the availability of the system. The present work is based on the use of neutral axis (NA) for SHM of the structure. The NA is tracked by data fusion of measured yaw angle and strain through the use of Extended Kalman Filter (EKF). The EKF allows accurate tracking even...... in the presence of changing ambient conditions. NA is defined as the line or plane in the section of the beam which does not experience any tensile or compressive forces when loaded. The NA is the property of the cross section of the tower and is independent of the applied loads and ambient conditions. Any change...
COMPARATIVE STUDY OF DIFFERENT KALMAN FILTER IMPLEMENTATIONS IN POWER SYSTEM STABILITY
Directory of Open Access Journals (Sweden)
H. H. Goh
2014-01-01
Full Text Available Voltage stability and voltage collapse issues have in recent years begun to constitute an unpleasant warning to the operational security of power systems. Many techniques have been investigated in order to predict the point of voltage collapse. However, there are still several restrictions due to the insufficiency of current system state information. Accompanied by the commencement of the Phasor Measurement Units (PMUs evolving technology, it donates a solution to enhance the existing power system state estimation. In consequence, the significances to develop preferable methods that would provide a preliminary warning before the voltage collapse had grabbed the attention. This study covers the forming of real-time system monitoring methods that able to provide a timely warning in the power system. The algorithms used to estimate the points of collapse are according to the theory that voltage instability is approximately linked to the maximum load ability of a transmission network. As a result, the critical operating conditions (peak of maximum deliverable power come when the system Thevenin impedance is equal to the load impedance. This study focuses specifically on research about the motivation and the application of different Kalman filter implementations such as Discrete Kalman Filter (DKF, Extended Kalman Filter (EKF and Unscented Kalman Filter (UKF are used to track the Thevenin parameters. Therefore, the implications of this research paper are to determine the robustness and reliability of the proposed tracking methods. As compared to previous studies, the tracking process is just mainly focused on DKF method only, while the novelty throughout this study is to compare the performances and efficiencies of different Kalman filters in determining the maximum load ability on the 2 different types of test systems. Accompanying, the parameters are utilized in real-time voltage instability estimator to discover the current system’s condition
DEFF Research Database (Denmark)
Wang, Yunlong; Soltani, Mohsen; Hussain, Dil muhammed Akbar
2016-01-01
, an adaptive Multiplicative Extended Kalman Filter (MEKF) for attitude estimation of Marine Satellite Tracking Antenna (MSTA) is presented with the measurement noise covariance matrix adjusted according to the norm of accelerometer measurements, which can significantly reduce the slamming influence from waves...
Kalman Filter Based Data Fusion for Bi-Axial Neutral Axis Tracking in Wind Turbine Towers
DEFF Research Database (Denmark)
Soman, Rohan; Malinowski, Pawel; Schmidt Paulsen, Uwe
2015-01-01
Structural Health Monitoring (SHM) systems allow early detection of damage which allows maintenance planning and reduces the maintenance cost. So there is a lot of active research in the area for SHM of civil and mechanical structures. The SHM system uses a damage sensitive feature, and any change...... in the structure is reflected by a change in this feature. If this change is above a threshold the structure is said to be damaged. In most applications the determination of this threshold is based on engineering judgment and the previous experience of the operator. These practices are highly subjective...... demonstrates a methodology for the selection of threshold for damage detection based on qualitative data acquired from several damage scenarios of a 10 MW wind turbine. The damage indicator is the change of neutral axis (NA) which is tracked using Kalman Filter (KF). Based on the level of damage to be detected...
Penalized Ensemble Kalman Filters for High Dimensional Non-linear Systems
Hou, Elizabeth; Hero, Alfred O
2016-01-01
The ensemble Kalman filter (EnKF) is a data assimilation technique that uses an ensemble of models, updated with data, to track the time evolution of a non-linear system. It does so by using an empirical approximation to the well-known Kalman filter. Unfortunately, its performance suffers when the ensemble size is smaller than the state space, as is often the case for computationally burdensome models. This scenario means that the empirical estimate of the state covariance is not full rank and possibly quite noisy. To solve this problem in this high dimensional regime, a computationally fast and easy to implement algorithm called the penalized ensemble Kalman filter (PEnKF) is proposed. Under certain conditions, it can be proved that the PEnKF does not require more ensemble members than state dimensions in order to have good performance. Further, the proposed approach does not require special knowledge of the system such as is used by localization methods. These theoretical results are supported with superior...
Damping strapdown inertial navigation system based on a Kalman filter
Zhao, Lin; Li, Jiushun; Cheng, Jianhua; Hao, Yong
2016-11-01
A damping strapdown inertial navigation system (DSINS) can effectively suppress oscillation errors of strapdown inertial navigation systems (SINSs) and improve the navigation accuracy of SINSs. Aiming at overcoming the disadvantages of traditional damping methods, a DSINS, based on a Kalman filter (KF), is proposed in this paper. Using the measurement data of accelerometers and calculated navigation parameters during the navigation process, the expression of the observation equation is derived. The calculation process of the observation in both the internal damping state and the external damping state is presented. Finally, system oscillation errors are compensated by a KF. Simulation and test results show that, compared with traditional damping methods, the proposed method can reduce system overshoot errors and shorten the convergence time of oscillation errors effectively.
Improved Kalman Filter Method for Measurement Noise Reduction in Multi Sensor RFID Systems
Directory of Open Access Journals (Sweden)
Min Chul Kim
2011-10-01
Full Text Available Recently, the range of available Radio Frequency Identification (RFID tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less Mean Squared Error (MSE than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments.
Improved Kalman filter method for measurement noise reduction in multi sensor RFID systems.
Eom, Ki Hwan; Lee, Seung Joon; Kyung, Yeo Sun; Lee, Chang Won; Kim, Min Chul; Jung, Kyung Kwon
2011-01-01
Recently, the range of available radio frequency identification (RFID) tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less mean squared error (MSE) than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments.
Rigatos, Gerasimos
2016-07-01
The Derivative-free nonlinear Kalman Filter is used for developing a communication system that is based on a chaotic modulator such as the Duffing system. In the transmitter's side, the source of information undergoes modulation (encryption) in which a chaotic signal generated by the Duffing system is the carrier. The modulated signal is transmitted through a communication channel and at the receiver's side demodulation takes place, after exploiting the estimation provided about the state vector of the chaotic oscillator by the Derivative-free nonlinear Kalman Filter. Evaluation tests confirm that the proposed filtering method has improved performance over the Extended Kalman Filter and reduces significantly the rate of transmission errors. Moreover, it is shown that the proposed Derivative-free nonlinear Kalman Filter can work within a dual Kalman Filtering scheme, for performing simultaneously transmitter-receiver synchronisation and estimation of unknown coefficients of the communication channel.
A novel strong tracking finite-difference extended Kalman filter for nonlinear eye tracking
Institute of Scientific and Technical Information of China (English)
ZHANG ZuTao; ZHANG JiaShu
2009-01-01
Non-Intrusive methods for eye tracking are Important for many applications of vision-based human computer interaction. However, due to the high nonlinearity of eye motion, how to ensure the robust-ness of external interference and accuracy of eye tracking poses the primary obstacle to the integration of eye movements into today's interfaces. In this paper, we present a strong tracking finite-difference extended Kalman filter algorithm, aiming to overcome the difficulty In modeling nonlinear eye tracking. In filtering calculation, strong tracking factor is introduced to modify a priori covariance matrix and im-prove the accuracy of the filter. The filter uses finite-difference method to calculate partial derivatives of nonlinear functions for eye tracking. The latest experimental results show the validity of our method for eye tracking under realistic conditions.
River Flow Lane Detection and Kalman Filtering-Based B-Spline Lane Tracking
Directory of Open Access Journals (Sweden)
King Hann Lim
2012-01-01
Full Text Available A novel lane detection technique using adaptive line segment and river flow method is proposed in this paper to estimate driving lane edges. A Kalman filtering-based B-spline tracking model is also presented to quickly predict lane boundaries in consecutive frames. Firstly, sky region and road shadows are removed by applying a regional dividing method and road region analysis, respectively. Next, the change of lane orientation is monitored in order to define an adaptive line segment separating the region into near and far fields. In the near field, a 1D Hough transform is used to approximate a pair of lane boundaries. Subsequently, river flow method is applied to obtain lane curvature in the far field. Once the lane boundaries are detected, a B-spline mathematical model is updated using a Kalman filter to continuously track the road edges. Simulation results show that the proposed lane detection and tracking method has good performance with low complexity.
Directory of Open Access Journals (Sweden)
Wei Zhu
2016-06-01
Full Text Available In order to improve the tracking accuracy, model estimation accuracy and quick response of multiple model maneuvering target tracking, the interacting multiple models five degree cubature Kalman filter (IMM5CKF is proposed in this paper. In the proposed algorithm, the interacting multiple models (IMM algorithm processes all the models through a Markov Chain to simultaneously enhance the model tracking accuracy of target tracking. Then a five degree cubature Kalman filter (5CKF evaluates the surface integral by a higher but deterministic odd ordered spherical cubature rule to improve the tracking accuracy and the model switch sensitivity of the IMM algorithm. Finally, the simulation results demonstrate that the proposed algorithm exhibits quick and smooth switching when disposing different maneuver models, and it also performs better than the interacting multiple models cubature Kalman filter (IMMCKF, interacting multiple models unscented Kalman filter (IMMUKF, 5CKF and the optimal mode transition matrix IMM (OMTM-IMM.
Zhu, Wei; Wang, Wei; Yuan, Gannan
2016-06-01
In order to improve the tracking accuracy, model estimation accuracy and quick response of multiple model maneuvering target tracking, the interacting multiple models five degree cubature Kalman filter (IMM5CKF) is proposed in this paper. In the proposed algorithm, the interacting multiple models (IMM) algorithm processes all the models through a Markov Chain to simultaneously enhance the model tracking accuracy of target tracking. Then a five degree cubature Kalman filter (5CKF) evaluates the surface integral by a higher but deterministic odd ordered spherical cubature rule to improve the tracking accuracy and the model switch sensitivity of the IMM algorithm. Finally, the simulation results demonstrate that the proposed algorithm exhibits quick and smooth switching when disposing different maneuver models, and it also performs better than the interacting multiple models cubature Kalman filter (IMMCKF), interacting multiple models unscented Kalman filter (IMMUKF), 5CKF and the optimal mode transition matrix IMM (OMTM-IMM).
Noise adaptive fading Kalman filter for free-space laser communication beacon tracking.
Li, Lixing; Huang, Yongmei; Wang, Qiang; Yang, Fasheng
2016-10-20
We proposed a prediction algorithm for laser communication pointing, acquisition, and tracking (PAT) subsystems in order to further improve PAT accuracy and reduce the effect of processing delay. In terms of this prediction algorithm, a fading Kalman filter is employed, with the observation noise obtained by the gray value distribution of the laser images. Moreover, to better fit the dynamics of a laser target, the two-stage dynamic model has been chosen as the state transition model for Kalman filtering. In addition, the two-stage dynamic model has been modified by accommodating its form to a change of time lag, thereby compensating the effect of time delay. A series of horizontal path (17 km) experiments under different atmospheric conditions were conducted in the fields. According to the experimental results, the algorithm we proposed could effectively reduce the tracking error and improve pointing accuracy.
Using Kalman filters to reduce noise from RFID location system.
Abreu, Pedro Henriques; Xavier, José; Silva, Daniel Castro; Reis, Luís Paulo; Petry, Marcelo
2014-01-01
Nowadays, there are many technologies that support location systems involving intrusive and nonintrusive equipment and also varying in terms of precision, range, and cost. However, the developers some time neglect the noise introduced by these systems, which prevents these systems from reaching their full potential. Focused on this problem, in this research work a comparison study between three different filters was performed in order to reduce the noise introduced by a location system based on RFID UWB technology with an associated error of approximately 18 cm. To achieve this goal, a set of experiments was devised and executed using a miniature train moving at constant velocity in a scenario with two distinct shapes-linear and oval. Also, this train was equipped with a varying number of active tags. The obtained results proved that the Kalman Filter achieved better results when compared to the other two filters. Also, this filter increases the performance of the location system by 15% and 12% for the linear and oval paths respectively, when using one tag. For a multiple tags and oval shape similar results were obtained (11-13% of improvement).
Fast polarization-state tracking scheme based on radius-directed linear Kalman filter.
Yang, Yanfu; Cao, Guoliang; Zhong, Kangping; Zhou, Xian; Yao, Yong; Lau, Alan Pak Tao; Lu, Chao
2015-07-27
We propose and experimentally demonstrate a fast polarization tracking scheme based on radius-directed linear Kalman filter. It has the advantages of fast convergence and is inherently insensitive to phase noise and frequency offset effects. The scheme is experimentally compared to conventional polarization tracking methods on the polarization rotation angular frequency. The results show that better tracking capability with more than one order of magnitude improvement is obtained in the cases of polarization multiplexed QPSK and 16QAM signals. The influences of the filter tuning parameters on tracking performance are also investigated in detail.
Feedback Robust Cubature Kalman Filter for Target Tracking Using an Angle Sensor.
Wu, Hao; Chen, Shuxin; Yang, Binfeng; Chen, Kun
2016-05-09
The direction of arrival (DOA) tracking problem based on an angle sensor is an important topic in many fields. In this paper, a nonlinear filter named the feedback M-estimation based robust cubature Kalman filter (FMR-CKF) is proposed to deal with measurement outliers from the angle sensor. The filter designs a new equivalent weight function with the Mahalanobis distance to combine the cubature Kalman filter (CKF) with the M-estimation method. Moreover, by embedding a feedback strategy which consists of a splitting and merging procedure, the proper sub-filter (the standard CKF or the robust CKF) can be chosen in each time index. Hence, the probability of the outliers' misjudgment can be reduced. Numerical experiments show that the FMR-CKF performs better than the CKF and conventional robust filters in terms of accuracy and robustness with good computational efficiency. Additionally, the filter can be extended to the nonlinear applications using other types of sensors.
Fuzzy Logic Based Autonomous Parallel Parking System with Kalman Filtering
Panomruttanarug, Benjamas; Higuchi, Kohji
This paper presents an emulation of fuzzy logic control schemes for an autonomous parallel parking system in a backward maneuver. There are four infrared sensors sending the distance data to a microcontroller for generating an obstacle-free parking path. Two of them mounted on the front and rear wheels on the parking side are used as the inputs to the fuzzy rules to calculate a proper steering angle while backing. The other two attached to the front and rear ends serve for avoiding collision with other cars along the parking space. At the end of parking processes, the vehicle will be in line with other parked cars and positioned in the middle of the free space. Fuzzy rules are designed based upon a wall following process. Performance of the infrared sensors is improved using Kalman filtering. The design method needs extra information from ultrasonic sensors. Starting from modeling the ultrasonic sensor in 1-D state space forms, one makes use of the infrared sensor as a measurement to update the predicted values. Experimental results demonstrate the effectiveness of sensor improvement.
IAE-adaptive Kalman filter for INS/GPS integrated navigation system
Institute of Scientific and Technical Information of China (English)
Bian Hongwei; Jin Zhihua; Tian Weifeng
2006-01-01
A marine INS/GPS adaptive navigation system is presented in this paper. GPS with two antenna providing vessel's altitude is selected as the auxiliary system fusing with INS to improve the performance of the hybrid system. The Kalman filter is the most frequently used algorithm in the integrated navigation system, which is capable of estimating INS errors online based on the measured errors between INS and GPS. The standard Kalman filter (SKF) assumes that the statistics of the noise on each sensor are given. As long as the noise distributions do not change, the Kalman filter will give the optimal estimation. However GPS receiver will be disturbed easily and thus temporally changing measurement noise will join into the outputs of GPS, which will lead to performance degradation of the Kalman filter. Many researchers introduce fuzzy logic control method into innovation-based adaptive estimation adaptive Kalman filtering (IAE-AKF) algorithm, and accordingly propose various adaptive Kalman filters. However how to design the fuzzy logic controller is a very complicated problem still without a convincing solution. A novel IAE-AKF is proposed herein, which is based on the maximum likelihood criterion for the proper computation of the filter innovation covariance and hence of the filter gain. The approach is direct and simple without having to establish fuzzy inference rules. After having deduced the proposed IAE-AKF algorithm theoretically in detail, the approach is tested by the simulation based on the system error model of the developed INS/GPS integrated marine navigation system. Simulation results show that the adaptive Kalman filter outperforms the SKF with higher accuracy, robustness and less computation. It is demonstrated that this proposed approach is a valid solution for the unknown changing measurement noise exited in the Kalman filter.
Szczęsna, Agnieszka; Pruszowski, Przemysław
2016-01-01
Inertial orientation tracking is still an area of active research, especially in the context of out-door, real-time, human motion capture. Existing systems either propose loosely coupled tracking approaches where each segment is considered independently, taking the resulting drawbacks into account, or tightly coupled solutions that are limited to a fixed chain with few segments. Such solutions have no flexibility to change the skeleton structure, are dedicated to a specific set of joints, and have high computational complexity. This paper describes the proposal of a new model-based extended quaternion Kalman filter that allows for estimation of orientation based on outputs from the inertial measurements unit sensors. The filter considers interdependencies resulting from the construction of the kinematic chain so that the orientation estimation is more accurate. The proposed solution is a universal filter that does not predetermine the degree of freedom at the connections between segments of the model. To validation the motion of 3-segments single link pendulum captured by optical motion capture system is used. The next step in the research will be to use this method for inertial motion capture with a human skeleton model.
Estimation of noise parameters in dynamical system identification with Kalman filters.
Kwasniok, Frank
2012-09-01
A method is proposed for determining dynamical and observational noise parameters in state and parameter identification from time series using Kalman filters. The noise covariances are estimated in a secondary optimization by maximizing the predictive likelihood of the data. The approach is based on internal consistency; for the correct noise parameters, the uncertainty projected by the Kalman filter matches the actual predictive uncertainty. The method is able to disentangle dynamical and observational noise. The algorithm is demonstrated for the linear, extended, and unscented Kalman filters using an Ornstein-Uhlenbeck process, the noise-driven Lorenz system, and van der Pol oscillator as well as a paleoclimatic ice-core record as examples. The approach is also applicable to the ensemble Kalman filter and can be readily extended to non-Gaussian estimation frameworks such as Gaussian-sum filters and particle filters.
Islanding Detection for Microgrid Based on Frequency Tracking Using Extended Kalman Filter Algorithm
Directory of Open Access Journals (Sweden)
Bin Li
2014-01-01
Full Text Available Islanding detection is essential for secure and reliable operation of microgrids. Considering the relationship between the power generation and the load in microgrids, frequency may vary with time when islanding occurs. As a common approach, frequency measurement is widely used to detect islanding condition. In this paper, a novel frequency calculation algorithm based on extended Kalman filter was proposed to track dynamic frequency of the microgrid. Taylor series expansion was introduced to solve nonlinear state equations. In addition, a typical microgrid model was built using MATLAB/SIMULINK. Simulation results demonstrated that the proposed algorithm achieved great stability and strong robustness in of tracking dynamic frequency.
Indian Academy of Sciences (India)
A H Mazinan; M Sarikhani
2014-02-01
With a focus on new researches in the area of intelligent transportation systems (ITS), an efficient approach has been investigated here. Based on the present view point, analysis of traffic signs are first considered via intelligence based approach, which is carried out through three main stages including detection, tracking and recognition, respectively, in this research. The key role of detection is to identify traffic signs by classification of road sign shapes in accordance with their signatures. This classification consists of four different shapes of circle, semicircle, triangle and square, as well. The linear classification of traffic sign is also carried out via support vector machine (SVM) by using one against all (OAA), since the present SVMs classifiers realized via linear kernel. The next step is to track traffic sign. It should be noted that this technique is now developed to reduce the searching mode in case of the whole area to be optimized its computational processing, consequently. This research work is investigated by realizing Kalman filter approach, where, finally, in recognition step, a feature of the region of interest (ROI) has been extracted for SVM classification. Histogram of oriented gradient (HOG) is realized in organizing the approach, as long as Gaussian kernel is also developed for non-linear SVM classifier.
Kalman滤波在井下人员跟踪定位中的应用%Application of Kalman filter in underground personnel tracking and positioning
Institute of Scientific and Technical Information of China (English)
罗宇锋; 刘勇; 李芳
2013-01-01
In view of problem that RSSI location algorithm does not have continuity in positioning process,the paper proposed an underground personnel positioning method with continuity based on Kalman filter.The method adopts Kalman filter to filter processing position coordinates of underground personnel estimated by RSSI location algorithm,and established a Kalman filter model on the basis of this coordinate in order to real-timely track underground personnel.The experimental results show that the positioning method based on Kalman filter has accurate tracking effect,and can improve real-time performance and tracking accuracy of underground personnel tracking and positioning system.%针对基于RSSI定位算法在定位过程中不具备连续性问题,提出了一种基于Kalman滤波的连续性并下人员定位方法.采用Kalman滤波对基于RSSI定位算法估算出的井下人员位置坐标进行滤波处理,在此坐标的基础上,建立Kalman滤波模型,利用Kalman滤波实现对井下人员的实时跟踪.实验结果表明,基于Kalman滤波的定位方法对井下人员的跟踪效果较好,提高了系统的实时性和跟踪精度.
Generic Kalman Filter Software
Lisano, Michael E., II; Crues, Edwin Z.
2005-01-01
the basis of the aforementioned templates. The GKF software can be used to develop many different types of unfactorized Kalman filters. A developer can choose to implement either a linearized or an extended Kalman filter algorithm, without having to modify the GKF software. Control dynamics can be taken into account or neglected in the filter-dynamics model. Filter programs developed by use of the GKF software can be made to propagate equations of motion for linear or nonlinear dynamical systems that are deterministic or stochastic. In addition, filter programs can be made to operate in user-selectable "covariance analysis" and "propagation-only" modes that are useful in design and development stages.
An introduction to Kalman filtering with Matlab examples
Kovvali, Narayan; Spanias, Andreas
2013-01-01
The Kalman filter is the Bayesian optimum solution to the problem of sequentially estimating the states of a dynamical system in which the state evolution and measurement processes are both linear and Gaussian. Given the ubiquity of such systems, the Kalman filter finds use in a variety of applications, e.g., target tracking, guidance and navigation, and communications systems. The purpose of this book is to present a brief introduction to Kalman filtering. The theoretical framework of the Kalman filter is first presented, followed by examples showing its use in practical applications. Extensi
Directory of Open Access Journals (Sweden)
Chen Siyu
2017-01-01
Full Text Available Patrol UAV has poor aerial posture stability and is largely affected by anthropic factors, which lead to some shortages such as low power cable tracking precision, captured image loss and inconvenient temperature measurement, etc. In order to solve these disadvantages, this article puts forward a power cable intelligent patrol system. The core innovation of the system is a 360° platform. This collects the position information of power cables by using far infrared sensors and carries out real-time all-direction adjustment of UAV lifting platform through the adaptive Kalman filter fuzzy PID control algorithm, so that the precise tracking of power cables is achieved. An intelligent patrol system is established to detect the faults more accurately, so that a high intelligence degree of power cable patrol system is realized.
Parnian, Neda; Golnaraghi, Farid
2010-01-01
This paper describes the development of a modified Kalman filter to integrate a multi-camera vision system and strapdown inertial navigation system (SDINS) for tracking a hand-held moving device for slow or nearly static applications over extended periods of time. In this algorithm, the magnitude of the changes in position and velocity are estimated and then added to the previous estimation of the position and velocity, respectively. The experimental results of the hybrid vision/SDINS design show that the position error of the tool tip in all directions is about one millimeter RMS. The proposed Kalman filter removes the effect of the gravitational force in the state-space model. As a result, the resulting error is eliminated and the resulting position is smoother and ripple-free.
Chen, Jie; Li, Jiahong; Yang, Shuanghua; Deng, Fang
2016-07-21
The identification of the nonlinearity and coupling is crucial in nonlinear target tracking problem in collaborative sensor networks. According to the adaptive Kalman filtering (KF) method, the nonlinearity and coupling can be regarded as the model noise covariance, and estimated by minimizing the innovation or residual errors of the states. However, the method requires large time window of data to achieve reliable covariance measurement, making it impractical for nonlinear systems which are rapidly changing. To deal with the problem, a weighted optimization-based distributed KF algorithm (WODKF) is proposed in this paper. The algorithm enlarges the data size of each sensor by the received measurements and state estimates from its connected sensors instead of the time window. A new cost function is set as the weighted sum of the bias and oscillation of the state to estimate the "best" estimate of the model noise covariance. The bias and oscillation of the state of each sensor are estimated by polynomial fitting a time window of state estimates and measurements of the sensor and its neighbors weighted by the measurement noise covariance. The best estimate of the model noise covariance is computed by minimizing the weighted cost function using the exhaustive method. The sensor selection method is in addition to the algorithm to decrease the computation load of the filter and increase the scalability of the sensor network. The existence, suboptimality and stability analysis of the algorithm are given. The local probability data association method is used in the proposed algorithm for the multitarget tracking case. The algorithm is demonstrated in simulations on tracking examples for a random signal, one nonlinear target, and four nonlinear targets. Results show the feasibility and superiority of WODKF against other filtering algorithms for a large class of systems.
Ensemble Kalman filters for dynamical systems with unresolved turbulence
Energy Technology Data Exchange (ETDEWEB)
Grooms, Ian, E-mail: grooms@cims.nyu.edu [Center for Atmosphere Ocean Science, Courant Institute of Mathematical Sciences, New York University, 251 Mercer St., New York, NY 10012 (United States); Lee, Yoonsang [Center for Atmosphere Ocean Science, Courant Institute of Mathematical Sciences, New York University, 251 Mercer St., New York, NY 10012 (United States); Majda, Andrew J. [Center for Atmosphere Ocean Science, Courant Institute of Mathematical Sciences, New York University, 251 Mercer St., New York, NY 10012 (United States); Center for Prototype Climate Modelling, NYU Abu Dhabi, Abu Dhabi (United Arab Emirates)
2014-09-15
Ensemble Kalman filters are developed for turbulent dynamical systems where the forecast model does not resolve all the active scales of motion. Coarse-resolution models are intended to predict the large-scale part of the true dynamics, but observations invariably include contributions from both the resolved large scales and the unresolved small scales. The error due to the contribution of unresolved scales to the observations, called ‘representation’ or ‘representativeness’ error, is often included as part of the observation error, in addition to the raw measurement error, when estimating the large-scale part of the system. It is here shown how stochastic superparameterization (a multiscale method for subgridscale parameterization) can be used to provide estimates of the statistics of the unresolved scales. In addition, a new framework is developed wherein small-scale statistics can be used to estimate both the resolved and unresolved components of the solution. The one-dimensional test problem from dispersive wave turbulence used here is computationally tractable yet is particularly difficult for filtering because of the non-Gaussian extreme event statistics and substantial small scale turbulence: a shallow energy spectrum proportional to k{sup −5/6} (where k is the wavenumber) results in two-thirds of the climatological variance being carried by the unresolved small scales. Because the unresolved scales contain so much energy, filters that ignore the representation error fail utterly to provide meaningful estimates of the system state. Inclusion of a time-independent climatological estimate of the representation error in a standard framework leads to inaccurate estimates of the large-scale part of the signal; accurate estimates of the large scales are only achieved by using stochastic superparameterization to provide evolving, large-scale dependent predictions of the small-scale statistics. Again, because the unresolved scales contain so much energy
Design and Simulation of the Integrated Navigation System based on Extended Kalman Filter
Directory of Open Access Journals (Sweden)
Zhou Weidong
2017-04-01
Full Text Available The integrated navigation system is used to estimate the position, velocity, and attitude of a vehicle with the output of inertial sensors. This paper concentrates on the problem of the INS/GPS integrated navigation system design and simulation. The structure of the INS/GPS integrated navigation system is made up of four parts: 1 GPS receiver, 2 Inertial Navigation System, 3 Extended Kalman filter, and 4 Integrated navigation scheme. Afterwards, we illustrate how to simulate the integrated navigation system with the extended Kalman filter by measuring position, velocity and attitude. Particularly, the extended Kalman filter can estimate states of the nonlinear system in the noisy environment. In extended Kalman filter, the estimation of the state vector and the error covariance matrix are computed by steps: 1 time update and 2 measurement update. Finally, the simulation process is implemented by Matlab, and simulation results prove that the error rate of statement measuring is lower when applying the extended Kalman filter in the INS/GPS integrated navigation system.
Kalman-Filter-Based Particle Tracking on Parallel Architectures at Hadron Colliders
Cerati, Giuseppe; Lantz, Steven; McDermott, Kevin; Riley, Dan; Tadel, Matevž; Wittich, Peter; Würthwein, Frank; Yagil, Avi
2016-01-01
Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. To stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High-Luminosity Large Hadron Collider (HL-LHC), for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques such as Cellular Automata or Hough Transforms. The most common track finding techniques in use today, however, are those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector sy...
Decentralized neural identifier and control for nonlinear systems based on extended Kalman filter.
Castañeda, Carlos E; Esquivel, P
2012-07-01
A time-varying learning algorithm for recurrent high order neural network in order to identify and control nonlinear systems which integrates the use of a statistical framework is proposed. The learning algorithm is based in the extended Kalman filter, where the associated state and measurement noises covariance matrices are composed by the coupled variance between the plant states. The formulation allows identification of interactions associate between plant state and the neural convergence. Furthermore, a sliding window-based method for dynamical modeling of nonstationary systems is presented to improve the neural identification in the proposed methodology. The efficiency and accuracy of the proposed method is assessed to a five degree of freedom (DOF) robot manipulator where based on the time-varying neural identifier model, the decentralized discrete-time block control and sliding mode techniques are used to design independent controllers and develop the trajectory tracking for each DOF.
Control of underactuated robotic systems with the use of the derivative-free nonlinear Kalman filter
Rigatos, Gerasimos G.; Siano, Pierluigi
2013-10-01
The Derivative-free nonlinear Kalman Filter is used for developing a robust controller which can be applied to underactuated MIMO robotic systems. Using differential flatness theory it is shown that the model of a closed-chain 2-DOF robotic manipulator can be transformed to linear canonical form. For the linearized equivalent of the robotic system it is shown that a state feedback controller can be designed. Since certain elements of the state vector of the linearized system can not be measured directly, it is proposed to estimate them with the use of a novel filtering method, the so-called Derivative-free nonlinear Kalman Filter. Moreover, by redesigning the Kalman Filter as a disturbance observer, it is is shown that one can estimate simultaneously external disturbances terms that affect the robotic model or disturbance terms which are associated with parametric uncertainty.
Directory of Open Access Journals (Sweden)
Dongyan Chen
2015-01-01
Full Text Available This paper is concerned with the optimal Kalman filtering problem for a class of discrete stochastic systems with multiplicative noises and random two-step sensor delays. Three Bernoulli distributed random variables with known conditional probabilities are introduced to characterize the phenomena of the random two-step sensor delays which may happen during the data transmission. By using the state augmentation approach and innovation analysis technique, an optimal Kalman filter is constructed for the augmented system in the sense of the minimum mean square error (MMSE. Subsequently, the optimal Kalman filtering is derived for corresponding augmented system in initial instants. Finally, a simulation example is provided to demonstrate the feasibility and effectiveness of the proposed filtering method.
Kalman filter based fault diagnosis of networked control system with white noise
Institute of Scientific and Technical Information of China (English)
Yanwei WANG; Ying ZHENG
2005-01-01
The networked control system NCS is regarded as a sampled control system with output time-variant delay.White noise is considered in the model construction of NCS.By using the Kalman filter theory to compute the filter parameters,a Kalman filter is constructed for this NCS.By comparing the output of the filter and the practical system,a residual is generated to diagnose the sensor faults and the actuator faults.Finally,an example is given to show the feasibility of the approach.
Bhattacharya, Kolahal; Banerjee, Sudeshna; Mondal, Naba K.
2016-07-01
In the context of track fitting problems by a Kalman filter, the appropriate functional forms of the elements of the random process noise matrix are derived for tracking through thick layers of dense materials and magnetic field. This work complements the form of the process noise matrix obtained by Mankel [1].
Kalman Filter Based Feature Analysis for Tracking People from Airborne Images
Sirmacek, B.; Reinartz, P.
2011-09-01
Recently, analysis of man events in real-time using computer vision techniques became a very important research field. Especially, understanding motion of people can be helpful to prevent unpleasant conditions. Understanding behavioral dynamics of people can also help to estimate future states of underground passages, shopping center like public entrances, or streets. In order to bring an automated solution to this problem, we propose a novel approach using airborne image sequences. Although airborne image resolutions are not enough to see each person in detail, we can still notice a change of color components in the place where a person exists. Therefore, we propose a color feature detection based probabilistic framework in order to detect people automatically. Extracted local features behave as observations of the probability density function (pdf) of the people locations to be estimated. Using an adaptive kernel density estimation method, we estimate the corresponding pdf. First, we use estimated pdf to detect boundaries of dense crowds. After that, using background information of dense crowds and previously extracted local features, we detect other people in non-crowd regions automatically for each image in the sequence. We benefit from Kalman filtering to track motion of detected people. To test our algorithm, we use a stadium entrance image data set taken from airborne camera system. Our experimental results indicate possible usage of the algorithm in real-life man events. We believe that the proposed approach can also provide crucial information to police departments and crisis management teams to achieve more detailed observations of people in large open area events to prevent possible accidents or unpleasant conditions.
A novel extended Kalman filter for a class of nonlinear systems
Institute of Scientific and Technical Information of China (English)
DONG Zhe; YOU Zheng
2006-01-01
Estimation of the state variables of nonlinear systems is one of the fundamental and significant problems in control and signal processing. A new extended Kalman filtering approach for a class of nonlinear discrete-time systems in engineering is presented in this paper. In contrast to the celebrated extended Kalman filter (EKF), there is no linearization operation in the design procedure of the filter, and the parameters of the filter are obtained through minimizing a proper upper bound of the mean-square estimation error. Simulation results show that this filter can provide higher estimation precision than that provided by the EKF.
Speed Estimation of Induction Motor Using Model Reference Adaptive System with Kalman Filter
Directory of Open Access Journals (Sweden)
Pavel Brandstetter
2013-01-01
Full Text Available The paper deals with a speed estimation of the induction motor using observer with Model Reference Adaptive System and Kalman Filter. For simulation, Hardware in Loop Simulation method is used. The first part of the paper includes the mathematical description of the observer for the speed estimation of the induction motor. The second part describes Kalman filter. The third part describes Hardware in Loop Simulation method and its realization using multifunction card MF 624. In the last section of the paper, simulation results are shown for different changes of the induction motor speed which confirm high dynamic properties of the induction motor drive with sensorless control.
Tracking Road Centerlines from Remotely Sensed Imagery Using Mean Shift and Kalman Filtering
Directory of Open Access Journals (Sweden)
CAO Fanzhi
2016-02-01
Full Text Available Road tracking based on template matching is one class of practical methods of road extraction. However, the conventional methods of template matching mainly utilize correlation coefficient as the similarity measure. As a result, these algorithms are sensitive to occlusions caused by vehicles and trees and are unsuitable for road extraction from high-resolution remotely sensed imagery. To address this problem, this paper designs a road center matching algorithm based on mean shift utilizing a robust similarity measure, which overcomes the sensitivity of correlation coefficient matching to occlusions; then Kalman filter is utilized to track road centerlines from high-resolution remotely sensed imagery. Experimental results demonstrate that the proposed method can extract road centerlines from high-resolution remotely sensed imagery accurately and is robust to occlusions caused by vehicles and trees.
Institute of Scientific and Technical Information of China (English)
Chen Ken; Chul Gyu Jhun
2013-01-01
This paper introduces an approach for visual tracking of multi-target with occlusion occurrence.Based on the author's previous work in which the Overlap Coefficient (OC) is used to detect the occlusion,in this paper a method of combining Bhattacharyya Coefficient (BC) and Kalman filter innovation term is proposed as the criteria for jointly detecting the occlusion occurrence.Fragmentation of target is introduced in order to closely monitor the occlusion development.In the course of occlusion,the Kalman predictor is applied to determine the location of the occluded target,and the criterion for checking the re-appearance of the occluded target is also presented.The proposed approach is put to test on a standard video sequence,suggesting the satisfactory performance in multi-target tracking.
Institute of Scientific and Technical Information of China (English)
Changyun Liu; Penglang Shui; Gang Wei; Song Li
2014-01-01
To improve the low tracking precision caused by lagged filter gain or imprecise state noise when the target highly maneu-vers, a modified unscented Kalman filter algorithm based on the improved filter gain and adaptive scale factor of state noise is pre-sented. In every filter process, the estimated scale factor is used to update the state noise covariance Qk, and the improved filter gain is obtained in the filter process of unscented Kalman filter (UKF) via predicted variance Pk|k-1, which is similar to the standard Kalman filter. Simulation results show that the proposed algorithm provides better accuracy and ability to adapt to the highly maneu-vering target compared with the standard UKF.
Kalman Filter Based Data Fusion for Bi-Axial Neutral Axis Tracking in Wind Turbine Towers
DEFF Research Database (Denmark)
Soman, Rohan; Malinowski, Pawel; Schmidt Paulsen, Uwe
2015-01-01
demonstrates a methodology for the selection of threshold for damage detection based on qualitative data acquired from several damage scenarios of a 10 MW wind turbine. The damage indicator is the change of neutral axis (NA) which is tracked using Kalman Filter (KF). Based on the level of damage to be detected...... in the structure is reflected by a change in this feature. If this change is above a threshold the structure is said to be damaged. In most applications the determination of this threshold is based on engineering judgment and the previous experience of the operator. These practices are highly subjective...... and the probability of occurrence of false positive and false negative detections, a threshold value is selected. This threshold is then applied to strain data from the Nordtank NTK500/41 wind turbine for validation....
Methodology for adapting the parameters of a fuzzy system using the extended Kalman filter
2011-01-01
When we try to analyze and to control a system whose model was obtained only based on input/output data, accuracy is essential in the model. On the other hand, to make the procedure practical, the modeling stage must be computationally efficient. In this regard, this paper presents the application of extended Kalman filter for the parametric adaptation of a fuzzy model.
Efficient decoding with steady-state Kalman filter in neural interface systems.
Malik, Wasim Q; Truccolo, Wilson; Brown, Emery N; Hochberg, Leigh R
2011-02-01
The Kalman filter is commonly used in neural interface systems to decode neural activity and estimate the desired movement kinematics. We analyze a low-complexity Kalman filter implementation in which the filter gain is approximated by its steady-state form, computed offline before real-time decoding commences. We evaluate its performance using human motor cortical spike train data obtained from an intracortical recording array as part of an ongoing pilot clinical trial. We demonstrate that the standard Kalman filter gain converges to within 95% of the steady-state filter gain in 1.5±0.5 s (mean ±s.d.). The difference in the intended movement velocity decoded by the two filters vanishes within 5 s, with a correlation coefficient of 0.99 between the two decoded velocities over the session length. We also find that the steady-state Kalman filter reduces the computational load (algorithm execution time) for decoding the firing rates of 25±3 single units by a factor of 7.0±0.9. We expect that the gain in computational efficiency will be much higher in systems with larger neural ensembles. The steady-state filter can thus provide substantial runtime efficiency at little cost in terms of estimation accuracy. This far more efficient neural decoding approach will facilitate the practical implementation of future large-dimensional, multisignal neural interface systems.
Atrsaei, Arash; Salarieh, Hassan; Alasty, Aria
2016-09-01
Due to various applications of human motion capture techniques, developing low-cost methods that would be applicable in nonlaboratory environments is under consideration. MEMS inertial sensors and Kinect are two low-cost devices that can be utilized in home-based motion capture systems, e.g., home-based rehabilitation. In this work, an unscented Kalman filter approach was developed based on the complementary properties of Kinect and the inertial sensors to fuse the orientation data of these two devices for human arm motion tracking during both stationary shoulder joint position and human body movement. A new measurement model of the fusion algorithm was obtained that can compensate for the inertial sensors drift problem in high dynamic motions and also joints occlusion in Kinect. The efficiency of the proposed algorithm was evaluated by an optical motion tracker system. The errors were reduced by almost 50% compared to cases when either inertial sensor or Kinect measurements were utilized.
Adaptive Robust Tracking Control of Pressure Trajectory Based on Kalman Filter
Institute of Scientific and Technical Information of China (English)
CAO Jian; ZHU Xiaocong; TAO Guoliang; YAO Bin
2009-01-01
When adaptive robust control(ARC) strategy based on backstepping design is applied in pneumatic servo control, accurate pressure tracking in motion is especially necessary for both force and position trajectories tracking of rodless pneumatic cylinders, and therefore an adaptive robust pressure controller is developed in this paper to improve the tracking accuracy of pressure trajectory in the chamber when the pneumatic cylinder is moving. In the proposed adaptive robust pressure controller, off-line fitting of the orifice area and on-line parameter estimation of the flow coefficient are utilized to have improved model compensation, and meanwhile robust feedback and Kalman filter are used to have strong robustness against uncertain nonlinearities, parameter fluctuations and noise. Research results demonstrate that the adaptive robust pressure controller could not only track various pressure trajectories accurately even when the pneumatic cylinder is moving, but also obtain very smooth control input, which indicates the effectiveness of adaptive model compensation. Especially when a step pressure trajectory is tracked under the condition of the movement of a rodless pneumatic cylinder, maximum tracking error of ARC is 4.46 kPa and average tracking error is 0.99 kPa, and steady-state error of ARC could achieve 0.84 kPa, which is very close to the measurement accuracy of pressure transducer.
Directory of Open Access Journals (Sweden)
P. Kalyana Sundaram
2016-11-01
Full Text Available The paper presents a novel method for the assessment of the power quality disturbances in the distribution system using the Kalman filter and fuzzy expert system. In this method the various classes of disturbance signals are developed through the Matlab Simulink on the test system model. The characteristic features of the disturbance signals are extracted based on the Kalman filter technique. The obtained features such as amplitude and slope are given as the two inputs to the fuzzy expert system. It applied some rules on these inputs to assess the various PQ disturbances. Fuzzy classifier has been carried out and tested for various power quality disturbances. The results clearly demonstrate that the proposed method in the distribution system has the ability to detect and classify PQ events.
Tracking magma volume recovery at okmok volcano using GPS and an unscented kalman filter
Fournier, T.; Freymueller, Jeffrey T.; Cervelli, Peter
2009-01-01
Changes beneath a volcano can be observed through position changes in a GPS network, but distinguishing the source of site motion is not always straightforward. The records of continuous GPS sites provide a favorable data set for tracking magma migration. Dense campaign observations usually provide a better spatial picture of the overall deformation field, at the expense of an episodic temporal record. Combining these observations provides the best of both worlds. A Kalman filter provides a means for integrating discrete and continuous measurements and for interpreting subtle signals. The unscented Kalman filter (UKF) is a nonlinear method for time-dependent observations. We demonstrate the application of this technique to deformation data by applying it to GPS data collected at Okmok volcano. Seven years of GPS observations at Okmok are analyzed using a Mogi source model and the UKF. The deformation source at Okmok is relatively stable at 2.5 km depth below sea level, located beneath the center of the caldera, which means the surface deformation is caused by changes in the strength of the source. During the 7 years of GPS observations more than 0.5 m of uplift has occurred, a majority of that during the time period January 2003 to July 2004. The total volume recovery at Okmok since the last eruption in 1997 is ??60-80%. The UKF allows us to solve simultaneously for the time-dependence of the source strength and for the location without a priori information about the source. ?? 2009 by the American Geophysical Union.
Fusing inertial sensor data in an extended Kalman filter for 3D camera tracking.
Erdem, Arif Tanju; Ercan, Ali Özer
2015-02-01
In a setup where camera measurements are used to estimate 3D egomotion in an extended Kalman filter (EKF) framework, it is well-known that inertial sensors (i.e., accelerometers and gyroscopes) are especially useful when the camera undergoes fast motion. Inertial sensor data can be fused at the EKF with the camera measurements in either the correction stage (as measurement inputs) or the prediction stage (as control inputs). In general, only one type of inertial sensor is employed in the EKF in the literature, or when both are employed they are both fused in the same stage. In this paper, we provide an extensive performance comparison of every possible combination of fusing accelerometer and gyroscope data as control or measurement inputs using the same data set collected at different motion speeds. In particular, we compare the performances of different approaches based on 3D pose errors, in addition to camera reprojection errors commonly found in the literature, which provides further insight into the strengths and weaknesses of different approaches. We show using both simulated and real data that it is always better to fuse both sensors in the measurement stage and that in particular, accelerometer helps more with the 3D position tracking accuracy, whereas gyroscope helps more with the 3D orientation tracking accuracy. We also propose a simulated data generation method, which is beneficial for the design and validation of tracking algorithms involving both camera and inertial measurement unit measurements in general.
Neumann, M; Cuvillon, L; Breton, E; de Matheli, M
2013-01-01
Recently, a workflow for magnetic resonance (MR) image plane alignment based on tracking in real-time MR images was introduced. The workflow is based on a tracking device composed of 2 resonant micro-coils and a passive marker, and allows for tracking of the passive marker in clinical real-time images and automatic (re-)initialization using the microcoils. As the Kalman filter has proven its benefit as an estimator and predictor, it is well suited for use in tracking applications. In this paper, a Kalman filter is integrated in the previously developed workflow in order to predict position and orientation of the tracking device. Measurement noise covariances of the Kalman filter are dynamically changed in order to take into account that, according to the image plane orientation, only a subset of the 3D pose components is available. The improved tracking performance of the Kalman extended workflow could be quantified in simulation results. Also, a first experiment in the MRI scanner was performed but without quantitative results yet.
Multilevel Mixture Kalman Filter
Directory of Open Access Journals (Sweden)
Xiaodong Wang
2004-11-01
Full Text Available The mixture Kalman filter is a general sequential Monte Carlo technique for conditional linear dynamic systems. It generates samples of some indicator variables recursively based on sequential importance sampling (SIS and integrates out the linear and Gaussian state variables conditioned on these indicators. Due to the marginalization process, the complexity of the mixture Kalman filter is quite high if the dimension of the indicator sampling space is high. In this paper, we address this difficulty by developing a new Monte Carlo sampling scheme, namely, the multilevel mixture Kalman filter. The basic idea is to make use of the multilevel or hierarchical structure of the space from which the indicator variables take values. That is, we draw samples in a multilevel fashion, beginning with sampling from the highest-level sampling space and then draw samples from the associate subspace of the newly drawn samples in a lower-level sampling space, until reaching the desired sampling space. Such a multilevel sampling scheme can be used in conjunction with the delayed estimation method, such as the delayed-sample method, resulting in delayed multilevel mixture Kalman filter. Examples in wireless communication, specifically the coherent and noncoherent 16-QAM over flat-fading channels, are provided to demonstrate the performance of the proposed multilevel mixture Kalman filter.
Eldirdiri, Abubakr; Courivaud, Frédéric; Palomar, Rafael; Hol, Per Kristian; Elle, Ole Jakob
2014-03-01
This paper presents and evaluates stochastic computer algorithms used to automatically detect and track marked catheter tip during MR-guided catheterization. The algorithms developed employ extraction and matching of regional features of the catheter tip to perform the localization. To perform the tracking, a probability map that indicates the possible locations of the catheter tip in the MR images is first generated. This map is generated from the similarity to a given marker template. The method to assess the similarity between the marker template image and the different positions on each MR frame is based on speeded-up robust features extracted from the gradient image. The probability map is then used in two different stochastic localization frameworks mean shift (MS) localization and Kalman filter (KF) to track the position of the catheter using pairs of orthogonal projection of 2D MR images. The algorithm developed was tested on catheter tip marked with LC resonant circuit (of size 2 mm x 2 cm) tuned to the Larmor frequency of the MRI scanner and for different image resolutions (1, 3, 5 and 7 mm squared pixel). The tracking performance was very robust for the two algorithms MS and KF with image resolution as low as 3 mm where the localization error was about 1 mm for KF and 0.9 mm for MS. For the 5-mm resolution images, the error was 2.2 mm for both KF and MS, and for the 7-mm resolution images, the error was 3.6 and 3.7 mm for KF and MS, respectively. Both KF and MS gave comparable results when it comes to accuracy for the different image resolutions. The results showed that the two tracking algorithms tracked the catheter tip with high robustness for image resolution of 3 mm and with acceptable reliability for image resolution as poor as 5 mm with the resonant marker configuration used.
Stubberud, Allen R.
2017-01-01
When considering problems of linear sequential estimation, two versions of the Kalman filter, the continuous-time version and the discrete-time version, are often used. (A hybrid filter also exists.) In many applications in which the Kalman filter is used, the system to which the filter is applied is a linear continuous-time system, but the Kalman filter is implemented on a digital computer, a discrete-time device. The two general approaches for developing a discrete-time filter for implementation on a digital computer are: (1) approximate the continuous-time system by a discrete-time system (called discretization of the continuous-time system) and develop a filter for the discrete-time approximation; and (2) develop a continuous-time filter for the system and then discretize the continuous-time filter. Generally, the two discrete-time filters will be different, that is, it can be said that discretization and filter generation are not, in general, commutative operations. As a result, any relationship between the discrete-time and continuous-time versions of the filter for the same continuous-time system is often obfuscated. This is particularly true when an attempt is made to generate the continuous-time version of the Kalman filter through a simple limiting process (the sample period going to zero) applied to the discrete-time version. The correct result is, generally, not obtained. In a 1961 research report, Kalman showed that the continuous-time Kalman filter can be obtained from the discrete-time Kalman filter by taking limits as the sample period goes to zero if the white noise process for the continuous-time version is appropriately defined. Using this basic concept, a discrete-time Kalman filter can be developed for a continuous-time system as follows: (1) discretize the continuous-time system using Kalman's technique; and (2) develop a discrete-time Kalman filter for that discrete-time system. Kalman's results show that the discrete-time filter generated in
The role of model dynamics in ensemble Kalman filter performance for chaotic systems
Ng, G.-H.C.; McLaughlin, D.; Entekhabi, D.; Ahanin, A.
2011-01-01
The ensemble Kalman filter (EnKF) is susceptible to losing track of observations, or 'diverging', when applied to large chaotic systems such as atmospheric and ocean models. Past studies have demonstrated the adverse impact of sampling error during the filter's update step. We examine how system dynamics affect EnKF performance, and whether the absence of certain dynamic features in the ensemble may lead to divergence. The EnKF is applied to a simple chaotic model, and ensembles are checked against singular vectors of the tangent linear model, corresponding to short-term growth and Lyapunov vectors, corresponding to long-term growth. Results show that the ensemble strongly aligns itself with the subspace spanned by unstable Lyapunov vectors. Furthermore, the filter avoids divergence only if the full linearized long-term unstable subspace is spanned. However, short-term dynamics also become important as non-linearity in the system increases. Non-linear movement prevents errors in the long-term stable subspace from decaying indefinitely. If these errors then undergo linear intermittent growth, a small ensemble may fail to properly represent all important modes, causing filter divergence. A combination of long and short-term growth dynamics are thus critical to EnKF performance. These findings can help in developing practical robust filters based on model dynamics. ?? 2011 The Authors Tellus A ?? 2011 John Wiley & Sons A/S.
Target tracking by distributed autonomous vessels using the derivative-free nonlinear Kalman filter
Rigatos, Gerasimos; Siano, Pierluigi; Raffo, Guilerme
2015-12-01
In this paper a distributed control problem for unmanned surface vessels (USVs) is formulated as follows: there are N USVs which pursue another vessel (moving target). At each time instant each USV can obtain measurements of the target's cartesian coordinates. The objective is to make the USVs converge in a synchronized manner towards the target, while avoiding collisions between them and avoiding collisions with obstacles in their motion plane. A distributed control law is developed for the USVs which enables not only convergence of the USVs to the goal position, but also makes possible to maintain the cohesion of the USVs fleet. Moreover, distributed filtering is performed, so as to obtain an estimate of the target vessel's state vector. This provides the desirable state vector to be tracked by each one of the USVs. To this end, a new distributed nonlinear filtering method of improved accuracy and computation speed is introduced. This filtering approach, under the name Derivative-free distributed nonlinear Kalman Filter is based on differential flatness theory and on an exact linearization of the target vessel's dynamic/kinematic model.
Optical flow based Kalman filter for body joint prediction and tracking using HOG-LBP matching
Nair, Binu M.; Kendricks, Kimberley D.; Asari, Vijayan K.; Tuttle, Ronald F.
2014-03-01
phase or the correction phase of the corresponding Kalman filter is called. The Kalman filter for each joint is modeled and designed based on a linear approximation of the joint trajectory where its true form is mostly sinusoidal in fashion. The framework is tested on a private dataset provided by Air Force Institute of Technology. This dataset consists of a total of 21 video sequences, with each sequence containing an individual walking across the face of the building and climbing up / down a flight of stairs. The challenges associated in this dataset are the very low-resolution imagery along with some interlacing effects. The algorithm has being successfully tested on some sequences of this dataset and three joints mainly, the shoulder, the hip and the elbow are tracked successfully within a window of interest. Future work will involve using these three perfectly trackable joints to estimate positions of other joints which are difficult to track due to their small size and occlusions.
Real-time tracking for virtual environments using scaat kalman filtering and unsynchronised cameras
DEFF Research Database (Denmark)
Rasmussen, Niels Tjørnly; Störring, Morritz; Moeslund, Thomas B.;
2006-01-01
to achieve high update rates and to cope with the unsynchronised data a single-constraint-at-a-time (SCAAT) Extended Kalman Filtering approach is used that recursively integrates measurements as soon as they are available one-at-a-time. Tests show that this approach is more robust to occlusions and provides...
Canfield, Stephen
1999-01-01
This work will demonstrate the integration of sensor and system dynamic data and their appropriate models using an optimal filter to create a robust, adaptable, easily reconfigurable state (motion) estimation system. This state estimation system will clearly show the application of fundamental modeling and filtering techniques. These techniques are presented at a general, first principles level, that can easily be adapted to specific applications. An example of such an application is demonstrated through the development of an integrated GPS/INS navigation system. This system acquires both global position data and inertial body data, to provide optimal estimates of current position and attitude states. The optimal states are estimated using a Kalman filter. The state estimation system will include appropriate error models for the measurement hardware. The results of this work will lead to the development of a "black-box" state estimation system that supplies current motion information (position and attitude states) that can be used to carry out guidance and control strategies. This black-box state estimation system is developed independent of the vehicle dynamics and therefore is directly applicable to a variety of vehicles. Issues in system modeling and application of Kalman filtering techniques are investigated and presented. These issues include linearized models of equations of state, models of the measurement sensors, and appropriate application and parameter setting (tuning) of the Kalman filter. The general model and subsequent algorithm is developed in Matlab for numerical testing. The results of this system are demonstrated through application to data from the X-33 Michael's 9A8 mission and are presented in plots and simple animations.
Moment estimation for chemically reacting systems by extended Kalman filtering
Ruess, J; Milias-Argeitis, A; Summers, S; Lygeros, J
2011-01-01
In stochastic models of chemically reacting systems that contain bimolecular reactions, the dynamics of the moments of order up to n of the species populations do not form a closed system, in the sense that their time-derivatives depend on moments of order n + 1. To close the dynamics, the moments o
A Quantised State Systems Approach for Jacobian Free Extended Kalman Filtering
DEFF Research Database (Denmark)
Alminde, Lars; Bendtsen, Jan Dimon; Stoustrup, Jakob
2007-01-01
Model based methods for control of intelligent autonomous systems rely on a state estimate being available. One of the most common methods to obtain a state estimate for non-linear systems is the Extended Kalman Filter (EKF) algorithm. In order to apply the EKF an expression must be available...... for the Jacobian of the driving function; for complex systems this can be difficult to obtain. This paper presents an EKF variation that makes use of integrated quantised state simulation to propagate the state and obtain a backward difference estimate of the Jacobian at a small computational cost. A simulation...
Kalman Filter Integration of Modern Guidance and Navigation Systems
1989-07-04
TRAJECTOGRAPHIE PASSIVE PAR AZIMUT: AMELIORATION DE LA QUALITE D’ESTIMATION par P.Vacher, M.Gauivrit, G.Maynard De Lavalette et P.Mennecler 8 BIBLIOGRAPHY...airborne iystem configured with an Inertial system, a1 synlhetlc aperture radar , a doppler radar and other sensors that were .,uccessfully flight tested...for Precision Pointing Applications", NAECLN 1979 RECORD, pp. 1033-1039 2-13 RADA~R ON RADAR MODE FLIGHT PROFILE PICTURE FREEZE ...... .....- F~ue
Indirect Kalman Filter in Mobile Robot Application
Directory of Open Access Journals (Sweden)
Surachai Panich
2010-01-01
Full Text Available Problem statement: The most successful applications of Kalman filtering are to linearize about some nominal trajectory in state space that does not depend on the measurement data. The resulting filter is usually referred to as simply a linearized Kalman filter. Approach: This study introduced mainly indirect Kalman filter to estimate robots position. A developed differential encoder system integrated accelerometer is experimental tested in square shape. Results: Experimental results confirmed that indirect Kalman filter improves the accuracy and confidence of position estimation. Conclusion: In summary, we concluded that indirect Kalman filter has good potential to reduce error of measurement data.
Advanced Kalman Filter for Real-Time Responsiveness in Complex Systems
Energy Technology Data Exchange (ETDEWEB)
Welch, Gregory Francis [UNC-Chapel Hill/University of Central Florida; Zhang, Jinghe [UNC-Chapel Hill/Virginia Tech
2014-06-10
Complex engineering systems pose fundamental challenges in real-time operations and control because they are highly dynamic systems consisting of a large number of elements with severe nonlinearities and discontinuities. Today’s tools for real-time complex system operations are mostly based on steady state models, unable to capture the dynamic nature and too slow to prevent system failures. We developed advanced Kalman filtering techniques and the formulation of dynamic state estimation using Kalman filtering techniques to capture complex system dynamics in aiding real-time operations and control. In this work, we looked at complex system issues including severe nonlinearity of system equations, discontinuities caused by system controls and network switches, sparse measurements in space and time, and real-time requirements of power grid operations. We sought to bridge the disciplinary boundaries between Computer Science and Power Systems Engineering, by introducing methods that leverage both existing and new techniques. While our methods were developed in the context of electrical power systems, they should generalize to other large-scale scientific and engineering applications.
Institute of Scientific and Technical Information of China (English)
王秋平; 左玲; 康顺
2011-01-01
为解决非线性部分状态卡尔曼滤波算法中由于线性化误差所导致的滤波精度下降问题,提出采用UT变换方法计算系统状态误差方差,及基于新息自适应调整系统噪声方差,进而构成一种新的非线性自适应部分状态卡尔曼滤波算法,并总结出详细算法结构.同时,将此方法应用到非线性测量光电跟踪系统中,并与U卡尔曼滤波和非线性部分状态卡尔曼滤波进行性能对比.仿真实验结果证明,将UT变换和基于新息自适应调整系统噪声方差方法引入部分状态卡尔曼滤波是有效的,而且其性能明显优于U卡尔曼滤波和非线性部分状态卡尔曼滤波.%In order to solve the problem of accuracy decline caused by the linearization error in nonlinear reduced state Kalman filter, a new nonlinear adaptive reduced state Kalman filter algorithm is provided by using UT transformation to calculate the covariance of the system state error and modify adaptively the system noise covariance based on innovation,and the algorithm structure is summarized in detail. Then, the algorithm is applied in nonlinear measurement electro-optical tracking system and the performances of nonlinear adaptive reduced state Kalman filter were compared with unscented Kalman filter and nonlinear reduced state Kalman filter. The Matlab simulation results show that applying UT transformation and modifying adaptively the system noise covariance based on innovation in reduced state Kalman filter is valid, and the performance outperforms those of the unscented Kalman filter and nonlinear reduced state Kalman filter.
Neural Network Aided Kalman Filtering For Integrated GPS/INS Navigation System
Directory of Open Access Journals (Sweden)
Haidong GUO
2013-01-01
Full Text Available Kalman filter (KF uses measurement updates to correct system states error and to limit the errors in navigation solutions. However, only when the system dynamic and measurement models are correctly defined, and the noise statistics for the process are completely known, KF can optimally estimate a system’s states. Without measurement updates, Kalman filter’s prediction diverges; therefore the performance of an integrated GPS/INS navigation system may degrade rapidly when GPS signals are unavailable. This paper presents a neural network (NN aided Kalman filtering method to improve navigation solutions of integrated GPS/INS navigation system. In the proposed loosely coupled GPS/INS navigation system, extended KF (EKF estimates the INS measurement errors, plus position, velocity and attitude errors, and provides precise navigation solutions while GPS signals are available. At the same time, multi-layer NN is trained to map the vehicle manoeuvre with INS prediction errors during each GPS epoch, which is the input of the EKF. During GPS signal blockages, the NN can be used to predict the INS errors for EKF measurement updates, and in this way to improve navigation solutions. The principle of this hybrid method and the NN design are presented. Land vehicle based field test data are processed to evaluate the performance of the proposed method.
Institute of Scientific and Technical Information of China (English)
XIA Yuanqing; HAN Jingqing
2005-01-01
This paper concerns robust Kalman filtering for systems under norm bounded uncertainties in all the system matrices and error covariance constraints. Sufficient conditions are given for the existence of such filters in terms of Riccati equations. The solutions to the conditions can be used to design the filters. Finally, an illustrative example is given to demonstrate the effectiveness of the proposed design procedure.
DEFF Research Database (Denmark)
Mohd. Azam, Sazuan Nazrah
2017-01-01
In this paper, we used the modified quadruple tank system that represents a multi-input-multi-output (MIMO) system as an example to present the realization of a linear discrete-time state space model and to obtain the state estimation using Kalman filter in a methodical mannered. First, an existing...... dynamics of the system of stochastic differential equations is linearized to produce the deterministic-stochastic linear transfer function. Then the linear transfer function is discretized to produce a linear discrete-time state space model that has a deterministic and a stochastic component. The filtered...... part of the Kalman filter is used to estimates the current state, based on the model and the measurements. The static and dynamic Kalman filter is compared and all results is demonstrated through simulations....
Azam, Sazuan N. M.
2017-01-01
In this paper, we used the modified quadruple tank system that represents a multi-input-multi-output (MIMO) system as an example to present the realization of a linear discrete-time state space model and to obtain the state estimation using Kalman filter in a methodical mannered. First, an existing dynamics of the system of stochastic differential equations is linearized to produce the deterministic-stochastic linear transfer function. Then the linear transfer function is discretized to produce a linear discrete-time state space model that has a deterministic and a stochastic component. The filtered part of the Kalman filter is used to estimates the current state, based on the model and the measurements. The static and dynamic Kalman filter is compared and all results is demonstrated through simulations.
Pan, M.-Ch.; Chu, W.-Ch.; Le, Duc-Do
2016-12-01
The paper presents an alternative Vold-Kalman filter order tracking (VKF_OT) method, i.e. adaptive angular-velocity VKF_OT technique, to extract and characterize order components in an adaptive manner for the condition monitoring and fault diagnosis of rotary machinery. The order/spectral waveforms to be tracked can be recursively solved by using Kalman filter based on the one-step state prediction. The paper comprises theoretical derivation of computation scheme, numerical implementation, and parameter investigation. Comparisons of the adaptive VKF_OT scheme with two other ones are performed through processing synthetic signals of designated order components. Processing parameters such as the weighting factor and the correlation matrix of process noise, and data conditions like the sampling frequency, which influence tracking behavior, are explored. The merits such as adaptive processing nature and computation efficiency brought by the proposed scheme are addressed although the computation was performed in off-line conditions. The proposed scheme can simultaneously extract multiple spectral components, and effectively decouple close and crossing orders associated with multi-axial reference rotating speeds.
Directory of Open Access Journals (Sweden)
Shaoxing Hu
2015-11-01
Full Text Available Aiming at addressing the problem of high computational cost of the traditional Kalman filter in SINS/GPS, a practical optimization algorithm with offline-derivation and parallel processing methods based on the numerical characteristics of the system is presented in this paper. The algorithm exploits the sparseness and/or symmetry of matrices to simplify the computational procedure. Thus plenty of invalid operations can be avoided by offline derivation using a block matrix technique. For enhanced efficiency, a new parallel computational mechanism is established by subdividing and restructuring calculation processes after analyzing the extracted “useful” data. As a result, the algorithm saves about 90% of the CPU processing time and 66% of the memory usage needed in a classical Kalman filter. Meanwhile, the method as a numerical approach needs no precise-loss transformation/approximation of system modules and the accuracy suffers little in comparison with the filter before computational optimization. Furthermore, since no complicated matrix theories are needed, the algorithm can be easily transplanted into other modified filters as a secondary optimization method to achieve further efficiency.
Hu, Shaoxing; Xu, Shike; Wang, Duhu; Zhang, Aiwu
2015-11-11
Aiming at addressing the problem of high computational cost of the traditional Kalman filter in SINS/GPS, a practical optimization algorithm with offline-derivation and parallel processing methods based on the numerical characteristics of the system is presented in this paper. The algorithm exploits the sparseness and/or symmetry of matrices to simplify the computational procedure. Thus plenty of invalid operations can be avoided by offline derivation using a block matrix technique. For enhanced efficiency, a new parallel computational mechanism is established by subdividing and restructuring calculation processes after analyzing the extracted "useful" data. As a result, the algorithm saves about 90% of the CPU processing time and 66% of the memory usage needed in a classical Kalman filter. Meanwhile, the method as a numerical approach needs no precise-loss transformation/approximation of system modules and the accuracy suffers little in comparison with the filter before computational optimization. Furthermore, since no complicated matrix theories are needed, the algorithm can be easily transplanted into other modified filters as a secondary optimization method to achieve further efficiency.
Directory of Open Access Journals (Sweden)
M. Manimozhi
2014-05-01
Full Text Available Fault Detection and Isolation (FDI using Linear Kalman Filter (LKF is not sufficient for effective monitoring of nonlinear processes. Most of the chemical plants are nonlinear in nature while operating the plant in a wide range of process variables. In this study we present an approach for designing of Multi Model Adaptive Linear Kalman Filter (MMALKF for Fault Detection and Isolation (FDI of a nonlinear system. The uses a bank of adaptive Kalman filter, with each model based on different fault hypothesis. In this study the effectiveness of the MMALKF has been demonstrated on a spherical tank system. The proposed method is detecting and isolating the sensor and actuator soft faults which occur sequentially or simultaneously.
Directory of Open Access Journals (Sweden)
Gerasimos G. Rigatos
2011-12-01
Full Text Available The paper studies sensorless control for DC and induction motors, using Kalman Filtering techniques. First the case of a DC motor is considered and Kalman Filter-based control is implemented. Next the nonlinear model of a field-oriented induction motor is examined and the motor
一种新型自适应联邦滤波方法在战术导弹导航系统中的应用%Model noise Kalman filter algorithm for electro-optical tracking
Institute of Scientific and Technical Information of China (English)
刘英; 田蔚风; 赵健康; 鲍其莲; 朱士青
2012-01-01
In order to reduce the sensitivity of the filtering performance to the model noise in the target state space model, the method of updating the system noise covariance and measurement noise variance was proposed. By combining it with nonlinear Kalman filter, an adaptive nonlinear Kalman filter was constituted which is suitable for applying in electro-optical target tracking. Meanwhile it was applied in nonlinear measurement electro-optical tracking system, and compared with those of extended Kalman filter and anscented Kalman filter. The Matlab simulation results show that this method can adjust measurement noise covariance and system noise covariance in real time, and can effectively avoid the problem of filter performance degradation caused by the inaccurately statistical properties of the measurement noise and system noise, and the performance by the model noise Kalman filter significantly outperforms those of the extended Kalman filter and the unscented Kalman filter.%为满足复杂的环境下战术导弹导航系统的高可靠性导航的要求,对战术导弹的多传感器组合导航进行了研究.提出了一种基于新型自适应联邦卡尔曼滤波的巡航导弹SINS/GPS/EC组合导航方法,根据联邦滤波的分散滤波结构,分别建立了各滤波器的模型,进行了仿真试验验证.仿真结果表明,采用新型自适应联邦卡尔曼滤波算法的导航精度比采用集中卡尔曼滤波算法提高幅度不大,略高一些,但从自适应联邦卡尔曼滤波器的容错性比集中卡尔曼滤波器好得多,便于各导航子系统的故障检查和隔离.本文设计自适应联邦SINS/GPS/EC滤波器的在子系统较多的组合导航设计中具有高可靠性、低计算量、低成本和小体积等优势,具有工程应用价值.
Fang, Joyce
2016-01-01
Automation of alignment tasks can provide improved efficiency and greatly increase the flexibility of an optical system. Current optical systems with automated alignment capabilities are typically designed to include a dedicated wavefront sensor. Here, we demonstrate a self-aligning method for a reconfigurable system using only focal plane images. We define a two lens optical system with eight degrees of freedom. Images are simulated given misalignment parameters using ZEMAX software. We perform a principal component analysis (PCA) on the simulated dataset to obtain Karhunen-Lo\\`eve (KL) modes, which form the basis set whose weights are the system measurements. A model function which maps the state to the measurement is learned using nonlinear least squares fitting and serves as the measurement function for the nonlinear estimator (Extended and Unscented Kalman filters) used to calculate control inputs to align the system. We present and discuss both simulated and experimental results of the full system in op...
Fang, Joyce; Savransky, Dmitry
2016-08-01
Automation of alignment tasks can provide improved efficiency and greatly increase the flexibility of an optical system. Current optical systems with automated alignment capabilities are typically designed to include a dedicated wavefront sensor. Here, we demonstrate a self-aligning method for a reconfigurable system using only focal plane images. We define a two lens optical system with eight degrees of freedom. Images are simulated given misalignment parameters using ZEMAX software. We perform a principal component analysis (PCA) on the simulated dataset to obtain Karhunen-Lo\\`eve (KL) modes, which form the basis set whose weights are the system measurements. A model function which maps the state to the measurement is learned using nonlinear least squares fitting and serves as the measurement function for the nonlinear estimator (Extended and Unscented Kalman filters) used to calculate control inputs to align the system. We present and discuss both simulated and experimental results of the full system in operation.
Chaganti, Shikha; Nelson, Katrina; Mundy, Kevin; Luo, Yifu; Harrigan, Robert L; Damon, Steve; Fabbri, Daniel; Mawn, Louise; Landman, Bennett
2016-02-27
Pathologies of the optic nerve and orbit impact millions of Americans and quantitative assessment of the orbital structures on 3-D imaging would provide objective markers to enhance diagnostic accuracy, improve timely intervention and eventually preserve visual function. Recent studies have shown that the multi-atlas methodology is suitable for identifying orbital structures, but challenges arise in the identification of the individual extraocular rectus muscles that control eye movement. This is increasingly problematic in diseased eyes, where these muscles often appear to fuse at the back of the orbit (at the resolution of clinical computed tomography imaging) due to inflammation or crowding. We propose the use of Kalman filters to track the muscles in three-dimensions to refine multi-atlas segmentation and resolve ambiguity due to imaging resolution, noise, and artifacts. The purpose of our study is to investigate a method of automatically generating orbital metrics from CT imaging and demonstrate the utility of the approach by correlating structural metrics of the eye orbit with clinical data and visual function measures in subjects with thyroid eye disease. The pilot study demonstrates that automatically calculated orbital metrics are strongly correlated with several clinical characteristics. Moreover, the superior, inferior, medial and lateral rectus muscles obtained using Kalman filters are each correlated with different categories of functional deficit. These findings serve as foundation for further investigation in the use of CT imaging in the study, analysis and diagnosis of ocular diseases, specifically thyroid eye disease.
Chaganti, Shikha; Nelson, Katrina; Mundy, Kevin; Luo, Yifu; Harrigan, Robert L.; Damon, Steve; Fabbri, Daniel; Mawn, Louise; Landman, Bennett
2016-03-01
Pathologies of the optic nerve and orbit impact millions of Americans and quantitative assessment of the orbital structures on 3-D imaging would provide objective markers to enhance diagnostic accuracy, improve timely intervention, and eventually preserve visual function. Recent studies have shown that the multi-atlas methodology is suitable for identifying orbital structures, but challenges arise in the identification of the individual extraocular rectus muscles that control eye movement. This is increasingly problematic in diseased eyes, where these muscles often appear to fuse at the back of the orbit (at the resolution of clinical computed tomography imaging) due to inflammation or crowding. We propose the use of Kalman filters to track the muscles in three-dimensions to refine multi-atlas segmentation and resolve ambiguity due to imaging resolution, noise, and artifacts. The purpose of our study is to investigate a method of automatically generating orbital metrics from CT imaging and demonstrate the utility of the approach by correlating structural metrics of the eye orbit with clinical data and visual function measures in subjects with thyroid eye disease. The pilot study demonstrates that automatically calculated orbital metrics are strongly correlated with several clinical characteristics. Moreover, it is shown that the superior, inferior, medial and lateral rectus muscles obtained using Kalman filters are each correlated with different categories of functional deficit. These findings serve as foundation for further investigation in the use of CT imaging in the study, analysis and diagnosis of ocular diseases, specifically thyroid eye disease.
Comparison of robust H∞ filter and Kalman filter for initial alignment of inertial navigation system
Institute of Scientific and Technical Information of China (English)
HAO Yan-ling; CHEN Ming-hui; LI Liang-jun; XU Bo
2008-01-01
There are many filtering methods that can be used for the initial alignment of an integrated inertial navigation system.This paper discussed the use of GPS,but focused on two kinds of filters for the initial alignment of an integrated strapdown inertial navigation system (SINS).One method is based on the Kalman filter (KF),and the other is based on the robust filter.Simulation results showed that the filter provides a quick transient response and a little more accurate estimate than KF,given substantial process noise or unknown noise statistics.So the robust filter is an effective and useful method for initial alignment of SINS.This research should make the use of SINS more popular,and is also a step for further research.
A balanced Kalman filter ocean data assimilation system with application to the South Australian Sea
Li, Yi; Toumi, Ralf
2017-08-01
In this paper, an Ensemble Kalman Filter (EnKF) based regional ocean data assimilation system has been developed and applied to the South Australian Sea. This system consists of the data assimilation algorithm provided by the NCAR Data Assimilation Research Testbed (DART) and the Regional Ocean Modelling System (ROMS). We describe the first implementation of the physical balance operator (temperature-salinity, hydrostatic and geostrophic balance) to DART, to reduce the spurious waves which may be introduced during the data assimilation process. The effect of the balance operator is validated in both an idealised shallow water model and the ROMS model real case study. In the shallow water model, the geostrophic balance operator eliminates spurious ageostrophic waves and produces a better sea surface height (SSH) and velocity analysis and forecast. Its impact increases as the sea surface height and wind stress increase. In the real case, satellite-observed sea surface temperature (SST) and SSH are assimilated in the South Australian Sea with 50 ensembles using the Ensemble Adjustment Kalman Filter (EAKF). Assimilating SSH and SST enhances the estimation of SSH and SST in the entire domain, respectively. Assimilation with the balance operator produces a more realistic simulation of surface currents and subsurface temperature profile. The best improvement is obtained when only SSH is assimilated with the balance operator. A case study with a storm suggests that the benefit of the balance operator is of particular importance under high wind stress conditions. Implementing the balance operator could be a general benefit to ocean data assimilation systems.
DEFF Research Database (Denmark)
Wang, Yanbo; Tian, Yanjun; Wang, Xiongfei
2014-01-01
State monitoring and analysis of distribution systems has become an urgent issue, and state estimation serves as an important tool to deal with it. In this paper, a Kalman-Filter-based state estimation method for a multi-bus islanded microgrid is presented. First, an overall small signal model wi...
Directory of Open Access Journals (Sweden)
BYoung-Joo Jung
2012-01-01
Full Text Available During August and September 2008, The Observing System Research and Predictability Experiment (THORPEX – Pacific Asian Regional Campaign (T-PARC was conducted to investigate the formation, structure, targeted observation, extratropical transition (ET and downstream effects of tropical cyclones (TCs in the Western North Pacific (WNP region. This study investigates the effect of targeted dropsonde observations from T-PARC and the TC best track data on the track forecast of Typhoon Sinlaku (2008. A WRF-based ensemble Kalman filter (EnKF is used for a series of observation system experiments (OSEs. From the innovation statistics and rank histograms, the EnKF behaves well in terms of ensemble spread, despite some spread deficiency in low-tropospheric winds and warm and moist biases. Assimilation of targeted dropsonde observations leads to improved initial position and subsequent track forecast compared with experiments that only assimilate conventional observations. In the meantime, assimilation of TC position reduces the initial position error, whereas assimilation of minimum sea level pressure (SLP information is efficient to analyse the strong vortex structures of TC and reduces track forecast errors. Assimilation of TC position and minimum SLP information is particularly beneficial when dropsonde observations do not exist.
Low-cost attitude determination system using an extended Kalman filter (EKF) algorithm
Esteves, Fernando M.; Nehmetallah, Georges; Abot, Jandro L.
2016-05-01
Attitude determination is one of the most important subsystems in spacecraft, satellite, or scientific balloon mission s, since it can be combined with actuators to provide rate stabilization and pointing accuracy for payloads. In this paper, a low-cost attitude determination system with a precision in the order of arc-seconds that uses low-cost commercial sensors is presented including a set of uncorrelated MEMS gyroscopes, two clinometers, and a magnetometer in a hierarchical manner. The faster and less precise sensors are updated by the slower, but more precise ones through an Extended Kalman Filter (EKF)-based data fusion algorithm. A revision of the EKF algorithm fundamentals and its implementation to the current application, are presented along with an analysis of sensors noise. Finally, the results from the data fusion algorithm implementation are discussed in detail.
Extended Kalman filtering for joint mitigation of phase and amplitude noise in coherent QAM systems.
Pakala, Lalitha; Schmauss, Bernhard
2016-03-21
We numerically investigate our proposed carrier phase and amplitude noise estimation (CPANE) algorithm using extend Kalman filter (EKF) for joint mitigation of linear and non-linear phase noise as well as amplitude noise on 4, 16 and 64 polarization multiplexed (PM) quadrature amplitude modulation (QAM) 224 Gb/s systems. The results are compared to decision directed (DD) carrier phase estimation (CPE), DD phase locked loop (PLL) and universal CPE (U-CPE) algorithms. Besides eliminating the necessity of phase unwrapping function, EKF-CPANE shows improved performance for both back-to-back (BTB) and transmission scenarios compared to the aforementioned algorithms. We further propose a weighted innovation approach (WIA) of the EKF-CPANE which gives an improvement of 0.3 dB in the Q-factor, compared to the original algorithm.
Peyret, Nicolas; Dion, Jean-Luc; Chevallier, Gael
2016-10-01
This paper deals with the use of piezoelectric patches for nonlinear dynamic identification. The patches are glued on the structure to identify amplitude-dependent damping and natural frequency; their positions are defined in order to perform the excitation concentrated on the first bending mode. Their locations on the structure allow to perform "stop sines" tests, as, unlike electrodynamic shakers, piezos are embedded on structures and do not modify the studied structure after the excitation signal is switched off. Although, despite the piezo and the stop-sine, the signal is still modulated by other frequency components or polluted by random signals, a post processing with the extended Kalman Filter allows a very good determination of the modal damping and the natural frequency, especially when they depends on the free vibration amplitude.
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
Representing earthquake ground motion as time varying ARMA model, the instantaneous spectrum can only be determined by the time varying coefficients of the corresponding ARMA model. In this paper, unscented Kalman filter is applied to estimate the time varying coefficients. The comparison between the estimation results of unscented Kalman filter and Kalman filter methods shows that unscented Kalman filter can more precisely represent the distribution of the spectral peaks in time-frequency plane than Kalman filter, and its time and frequency resolution is finer which ensures its better ability to track the local properties of earthquake ground motions and to identify the systems with nonlinearity or abruptness. Moreover, the estimation results of ARMA models with different orders indicate that the theoretical frequency resolving power ofARMA model which was usually ignored in former studies has great effect on the estimation precision of instantaneous spectrum and it should be taken as one of the key factors in order selection of ARMA model.
Alignment of LHCb tracking stations with tracks fitted with a Kalman filter
Nicolas, L; Hicheur, A; Hulsbergen, W; Needham, M; Raven, G
2008-01-01
The LHCb detector, operating at the Large Hadron Collider at CERN, is a single arm spectrometer optimized for the detection of the forward b anti-b production for b physics studies. The reconstruction of vertices and tracks is done by silicon micro-strips and gaseous straw-tube based detectors. In order to achieve good mass resolution for resonances the tracking detectors should be aligned to a precision of the order of ten microns. A software framework has been developed to achieve these goals and has been tested in various configurations. After a description of the software, we present alignment results and show in particular for the first time that a global $\\chi^2$ solving for alignment using a locally parameterized track trajectory can be achieved.
Institute of Scientific and Technical Information of China (English)
Li Shu; Zhuo Jiashou; Ren Qingwen
2000-01-01
In this paper, an optimal criterion is presented for adaptive Kalman filter in a control sys tem with unknown variances of stochastic vibration by constructing a function of noise variances and minimizing the function. We solve the model and measure variances by using DFP optimal method to guarantee the results of Kalman filter to be optimized. Finally, the control of vibration can be implemented by LQG method.
A Tensor Network Kalman filter with an application in recursive MIMO Volterra system identification
Batselier, Kim; Chen, Zhongming; Wong, Ngai
2016-01-01
This article introduces a Tensor Network Kalman filter, which can estimate state vectors that are exponentially large without ever having to explicitly construct them. The Tensor Network Kalman filter also easily accommodates the case where several different state vectors need to be estimated simultaneously. The key lies in rewriting the standard Kalman equations as tensor equations and then implementing them using Tensor Networks, which effectively transforms the exponential storage cost and...
Kalman Filter Application to Symmetrical Fault Detection during Power Swing
DEFF Research Database (Denmark)
Khodaparast, Jalal; Silva, Filipe Miguel Faria da; Khederzadeh, M.;
2016-01-01
capability of Kalman Filter. The proposed index is calculated by assessing the difference between predicted and actual samples of impedance. The predicted impedance samples are obtained using Kalman filter and Taylor expansion, which is used in this paper to track the phasor precisely. Second order of Taylor...... expansion is used to decrease corrugation effect of impedance estimation and increase the reliability of proposed method. The instantaneous estimation and prediction capability of Kalman filter are two reasons for proposing utilizing Kalman filter....
Real-time tracking for virtual environments using scaat kalman filtering and unsynchronised cameras
DEFF Research Database (Denmark)
Rasmussen, Niels Tjørnly; Störring, Morritz; Moeslund, Thomas B.
2006-01-01
This paper presents a real-time outside-in camera-based tracking system for wireless 3D pose tracking of a user’s head and hand in a virtual environment. The system uses four unsynchronised cameras as sensors and passive retroreflective markers arranged in rigid bodies as targets. In order...
Low-cost adaptive square-root cubature Kalman filter for systems with process model uncer tainty
Institute of Scientific and Technical Information of China (English)
An Zhang; Shuida Bao; Wenhao Bi; Yuan Yuan
2016-01-01
A novel low-cost adaptive square-root cubature Kalman filter (LCASCKF) is proposed to enhance the robustness of pro-cess models while only increasing the computational load slightly. It is wel-known that the Kalman filter cannot handle uncertainties in a process model, such as initial state estimation errors, parameter mismatch and abrupt state changes. These uncertainties severely affect filter performance and may even provoke divergence. A strong tracking filter (STF), which utilizes a suboptimal fading fac-tor, is an adaptive approach that is commonly adopted to solve this problem. However, if the strong tracking SCKF (STSCKF) uses the same method as the extended Kalman filter (EKF) to introduce the suboptimal fading factor, it greatly increases the computational load. To avoid this problem, a low-cost introductory method is proposed and a hypothesis testing theory is applied to detect uncertainties. The computational load analysis is performed by counting the total number of floating-point operations and it is found that the computational load of LCASCKF is close to that of SCKF. Experimental results prove that the LCASCKF performs as wel as STSCKF, while the increase in computational load is much lower than STSCKF.
Lu, Gan; Bo, Xiong
2012-12-01
In this paper, a new method to break chaotic direct sequence spread spectrum (CD3S) communication systems is proposed. Here, the CD3S communication system transmitting different information symbols is considered as a combination of two subsystems which are driven by two different chaotic dynamic models, respectively. At every single time moment, the CD3S signal can be regarded as generated by the subsystem corresponding to the information symbol transmitted. Then, based on the multiple model form of CD3S signals, an interacting multiple model unscented Kalman filter with model switching detection mechanism is exploited to track the CD3S signals. The l(2)-norm of tracking errors is used to choose the model which best matches the intercepted signals. Thus, the information symbols are recovered indirectly. Compared with the existing methods, the proposed algorithm can: (1) reduce the influence of a low spreading factor; (2) calculate the spreading factor using the length of time intervals between model switching; and (3) be more effective under scenarios of low signal-to-noise ratio or multipath fading. Simulation results verify the superiority of the proposed method.
Kalman filtering implementation with Matlab
Kleinbauer, Rachel
2004-01-01
1960 und 1961 veröffentlichte Rudolf Emil Kalmen seine Arbeiten über einen rekursiven prädiktiven Filter, der auf dem Gebrauch von rekursiven Algorithmen basiert. Damit revolutionierte er das Feld der Schätzverfahren. Seitdem ist der sogenannte Kalman Filter Gegenstand ausführlicher Forschung und findet bis heute Anwendung in zahlreichen Gebieten. Der Kalman Filter schätzt den Zustand eines dynamischen Systems, auch wenn die exakte Form dieses Systems unbekannt ist. Der Filter ist sehr lei...
A New Adaptive Square-Root Unscented Kalman Filter for Nonlinear Systems with Additive Noise
Directory of Open Access Journals (Sweden)
Yong Zhou
2015-01-01
Full Text Available The Kalman filter (KF, extended KF, and unscented KF all lack a self-adaptive capacity to deal with system noise. This paper describes a new adaptive filtering approach for nonlinear systems with additive noise. Based on the square-root unscented KF (SRUKF, traditional Maybeck’s estimator is modified and extended to nonlinear systems. The square root of the process noise covariance matrix Q or that of the measurement noise covariance matrix R is estimated straightforwardly. Because positive semidefiniteness of Q or R is guaranteed, several shortcomings of traditional Maybeck’s algorithm are overcome. Thus, the stability and accuracy of the filter are greatly improved. In addition, based on three different nonlinear systems, a new adaptive filtering technique is described in detail. Specifically, simulation results are presented, where the new filter was applied to a highly nonlinear model (i.e., the univariate nonstationary growth model (UNGM. The UNGM is compared with the standard SRUKF to demonstrate its superior filtering performance. The adaptive SRUKF (ASRUKF algorithm can complete direct recursion and calculate the square roots of the variance matrixes of the system state and noise, which ensures the symmetry and nonnegative definiteness of the matrixes and greatly improves the accuracy, stability, and self-adaptability of the filter.
Directory of Open Access Journals (Sweden)
Haiyu Lan
2015-07-01
Full Text Available Numerous solutions/methods to solve the existing problems of pedestrian navigation/localization have been proposed in the last decade by both industrial and academic researchers. However, to date there are still major challenges for a single pedestrian navigation system (PNS to operate continuously, robustly, and seamlessly in all indoor and outdoor environments. In this paper, a novel method for pedestrian navigation approach to fuse the information from two separate PNSs is proposed. When both systems are used at the same time by a specific user, a nonlinear inequality constraint between the two systems’ navigation estimates always exists. Through exploring this constraint information, a novel filtering technique named Kalman filter with state constraint is used to diminish the positioning errors of both systems. The proposed method was tested by fusing the navigation information from two different PNSs, one is the foot-mounted inertial navigation system (INS mechanization-based system, the other PNS is a navigation device that is mounted on the user’s upper body, and adopting the pedestrian dead reckoning (PDR mechanization for navigation update. Monte Carlo simulations and real field experiments show that the proposed method for the integration of multiple PNSs could improve each PNS’ navigation performance.
Tracking the Kasatochi SO2 plume using the Ensemble Kalman Filter and OMI observations
Vira, Julius; Theys, Nicolas; Sofiev, Mikhail
2016-04-01
This paper discusses an application of the Ensemble Kalman Filter (EnKF) data assimilation method in improving prediction of volcanic plumes. Column retrievals of SO2 from the OMI instrument are assimilated into the SILAM chemistry transport model during 8 days following the 2008 eruption of Kasatochi. The analysis ensemble is shown to accurately capture the observed horizontal distribution of the plume, and moreover, comparison with backscatter profiles from the CALIOP instrument indicates that the analysis recovers the vertical distribution of SO2 realistically. The total SO2 burden following the eruption converges to about 2 Tg, which is within the range of previous estimates. The assimilation scheme uses an 80-member ensemble generated by perturbing the source term and the meteorological input data. The SO2 emission flux is sampled from a log-normal probability distribution resulting in large initial spread in the ensemble. A prescribed umbrella profile and a power law relation between the injection height and mass flux are assumed. However, despite the assumptions in the source term perturbations, the analysis ensemble is shown to be capable of reproducing complex, multi-layer SO2 profiles consistent with previous modeling studies on the Kasatochi eruption. The meteorological perturbations are introduced in the form of random time shifts in the input data, which ensures that the input data for each ensemble member remain physically consistent. Including the meteorological perturbations prevents the ensemble spread from decreasing unrealistically as the simulation proceeds, and consequently, the assimilation remains effective in correcting the predictions throughout the simulated period. In conclusion, EnKF is a promising approach for assimilating satellite observations in volcanic plume forecasts. An advantage of the ensemble approach is that model uncertainty, which is often difficult to handle in other schemes, can be included by perturbing the ensemble. A
Directory of Open Access Journals (Sweden)
Doo Yong Choi
2016-04-01
Full Text Available Rapid detection of bursts and leaks in water distribution systems (WDSs can reduce the social and economic costs incurred through direct loss of water into the ground, additional energy demand for water supply, and service interruptions. Many real-time burst detection models have been developed in accordance with the use of supervisory control and data acquisition (SCADA systems and the establishment of district meter areas (DMAs. Nonetheless, no consideration has been given to how frequently a flow meter measures and transmits data for predicting breaks and leaks in pipes. This paper analyzes the effect of sampling interval when an adaptive Kalman filter is used for detecting bursts in a WDS. A new sampling algorithm is presented that adjusts the sampling interval depending on the normalized residuals of flow after filtering. The proposed algorithm is applied to a virtual sinusoidal flow curve and real DMA flow data obtained from Jeongeup city in South Korea. The simulation results prove that the self-adjusting algorithm for determining the sampling interval is efficient and maintains reasonable accuracy in burst detection. The proposed sampling method has a significant potential for water utilities to build and operate real-time DMA monitoring systems combined with smart customer metering systems.
Directory of Open Access Journals (Sweden)
Y. Ding
2014-01-01
Full Text Available Both the structural parameter and external excitation have coupling influence on structural response. A new system identification method in time domain is proposed to simultaneously evaluate structural parameter and external excitation. The method can be used for linear and hysteresis nonlinear structural condition assessment based on incomplete structural responses. In this method, the structural excitation is decomposed by orthogonal approximation. With this approximation, the strongly time-variant excitation identification is transformed to gentle time-variant, even constant parameters identification. Then the extended Kalman filter is applied to simultaneously identify state vector including the structural parameters and excitation orthogonal parameters in state space based on incomplete measurements. The proposed method is validated numerically with the simulation of three-story linear and nonlinear structures subject to external force. The external force on the top floor and the structural parameters are simultaneously identified with the proposed system identification method. Results from both simulations indicate that the proposed method is capable of identifing the dynamic load and structural parameters fairly accurately with contaminated incomplete measurement for both of the linear and nonlinear structural systems.
A local ensemble transform Kalman filter data assimilation system for the NCEP global model
Szunyogh, Istvan; Kostelich, Eric J.; Gyarmati, Gyorgyi; Kalnay, Eugenia; Hunt, Brian R.; Ott, Edward; Satterfield, Elizabeth; Yorke, James A.
2008-01-01
The accuracy and computational efficiency of a parallel computer implementation of the Local Ensemble Transform Kalman Filter (LETKF) data assimilation scheme on the model component of the 2004 version of the Global Forecast System (GFS) of the National Centers for Environmental Prediction (NCEP) is investigated. Numerical experiments are carried out at model resolution T62L28. All atmospheric observations that were operationally assimilated by NCEP in 2004, except for satellite radiances, are assimilated with the LETKF. The accuracy of the LETKF analyses is evaluated by comparing it to that of the Spectral Statistical Interpolation (SSI), which was the operational global data assimilation scheme of NCEP in 2004. For the selected set of observations, the LETKF analyses are more accurate than the SSI analyses in the Southern Hemisphere extratropics and are comparably accurate in the Northern Hemisphere extratropics and in the Tropics. The computational wall-clock times achieved on a Beowulf cluster of 3.6 GHz Xeon processors make our implementation of the LETKF on the NCEP GFS a widely applicable analysis-forecast system, especially for research purposes. For instance, the generation of four daily analyses at the resolution of the NCAR-NCEP reanalysis (T62L28) for a full season (90 d), using 40 processors, takes less than 4 d of wall-clock time.
Directory of Open Access Journals (Sweden)
Malinowski Marcin
2015-02-01
Full Text Available In navigation practice, there are various navigational architecture and integration strategies of measuring instruments that affect the choice of the Kalman filtering algorithm. The analysis of different methods of Kalman filtration and associated smoothers applied in object tracing was made on the grounds of simulation tests of algorithms designed and presented in this paper. EKF (Extended Kalman Filter filter based on approximation with (jacobians partial derivations and derivative-free filters like UKF (Unscented Kalman Filter and CDKF (Central Difference Kalman Filter were implemented in comparison. For each method of filtration, appropriate smoothers EKS (Extended Kalman Smoother, UKS (Unscented Kalman Smoother and CDKS (Central Difference Kalman Smoother were presented as well. Algorithms performance is discussed on the theoretical base and simulation results of two cases are presented.
The Application of Federated Kalman Filtering in SINS/GPS/CNS Intergrated Navigation System
Directory of Open Access Journals (Sweden)
DENG Chun-lin
2012-04-01
Full Text Available Federated filter was an important method to estimate high-precision navigation parameters based on “SINS/GPS/CNS”. A no-feedback federated filter with UD_UKF algorithm was designed in the paper, a threetime amendment scheme to correct navigation parameters was designed at the same time and the mathematical model of SINS/GPS/CNS was established in launch inertial coordinate system too. The paper discussed the simulation conditions and a lot of simulations were carried out to compare 2 aspects: (1the performance between four navigation mode, which respectively is SINS, SINS/GPS, SINS/CNS, SINS/GPS/CNS;(2the estimate precision of federated filter and that of centralized Kalman filter. The results of simulation showed that the designed federated filter and amendment scheme based on SINS/GPS/CNS had high estimate precision and led to gain high hitting precision of ballistic missile, that is to say position errors were less than 20 meter and velocity errors were less than 0.1m/s in simulation.
Multilevel ensemble Kalman filter
Chernov, Alexey
2016-01-06
This work embeds a multilevel Monte Carlo (MLMC) sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF). In terms of computational cost vs. approximation error the asymptotic performance of the multilevel ensemble Kalman filter (MLEnKF) is superior to the EnKF s.
Sen, Subhamoy; Crinière, Antoine; Mevel, Laurent; Cerou, Frederic; Dumoulin, Jean
2017-04-01
Keywords: Parameter estimation; Kalman filter; Particle filter; Particle-Kalman filter; Correlated noise Although Kalman filter (KF) was originally proposed for system control i.e. steering a system as desired by monitoring the system states, its application for parameter estimation problems is widespread because of the excellent similarity between these two apparently different problem types in state space description. In standard Kalman filter, system dynamics is described through the dynamics of certain internal variable, termed as states, evolving over time as defined by an assumed process model, while a measurement model maps these states to measurements. In some parameter estimation problems, the system is replaced by a state space formulation of the dynamic model with parameters appended in the unobserved states and collectively observed through the response measurements. Filtering based parameter estimation problems are thus inherently nonlinear due to the required nonlinear mapping of parameters to the corresponding observations. Being a linear estimator, Kalman Filter (KF) cannot be employed for such nonlinear system estimation and alternative filtering algorithms (eg. Particle filter) are therefore generally used. However, being model based, these filters optimally estimate the parameters of a quasi-static model of the real dynamic system. Consequently, any time variation in the system dynamics may completely diverge the estimation yielding a false or infeasible solution. By decoupling the estimation of system states and parameters, and applying concurrent filtering strategy that attempts conditional estimation of states based on parameters and vice versa, time varying systems can be estimated. This article attempts to combine KF with Particle filter (PF) and apply them for estimation of states and system parameters respectively on a system with correlated noise in process and measurement. The idea is to nest a bank of linear KFs for state estimation
An Unscented Kalman Filter Approach to the Estimation of Nonlinear Dynamical Systems Models
Chow, Sy-Miin; Ferrer, Emilio; Nesselroade, John R.
2007-01-01
In the past several decades, methodologies used to estimate nonlinear relationships among latent variables have been developed almost exclusively to fit cross-sectional models. We present a relatively new estimation approach, the unscented Kalman filter (UKF), and illustrate its potential as a tool for fitting nonlinear dynamic models in two ways:…
Yue, Jian; Meng, Zhiyong; Yu, Cheng-Ku; Cheng, Lin-Wen
2017-01-01
This study explored the impact of coastal radar observability on the forecast of the track and rainfall of Typhoon Morakot (2009) using a WRF-based ensemble Kalman filter (EnKF) data assimilation (DA) system. The results showed that the performance of radar EnKF DA was quite sensitive to the number of radars being assimilated and the DA timing relative to the landfall of the tropical cyclone (TC). It was found that assimilating radial velocity (Vr) data from all the four operational radars during the 6 h immediately before TC landfall was quite important for the track and rainfall forecasts after the TC made landfall. The TC track forecast error could be decreased by about 43% and the 24-h rainfall forecast skill could be almost tripled. Assimilating Vr data from a single radar outperformed the experiment without DA, though with less improvement compared to the multiple-radar DA experiment. Different forecast performances were obtained by assimilating different radars, which was closely related to the first-time wind analysis increment, the location of moisture transport, the quasi-stationary rainband, and the local convergence line. However, only assimilating Vr data when the TC was farther away from making landfall might worsen TC track and rainfall forecasts. Besides, this work also demonstrated that Vr data from multiple radars, instead of a single radar, should be used for verification to obtain a more reliable assessment of the EnKF performance.
基于容积卡尔曼滤波的中段弹头跟踪方法%Tracking for midcourse warhead based on cubature Kalman filtering
Institute of Scientific and Technical Information of China (English)
熊智敏; 王党卫; 马晓岩
2016-01-01
针对弹道导弹中段跟踪精度要求高问题，采用了针对弹头非线性特征运动的滤波算法进行精确跟踪，提出了基于容积卡尔曼滤波的精确目标跟踪方法。仿真结果验证了所提方法的有效性。仿真结果表明，与被广泛应用的去偏转换卡尔曼滤波方法、扩展卡尔曼滤波方法、不敏卡尔曼滤波方法相比，所提方法具有更高的跟踪精度，在处理空间目标复杂非线性运动问题的过程中具有更好的稳定性。%Aiming at the problem of the high requirements for the precision of midcourse tracking of ballistic missile, this paper carrys on a accurate tracking by employing the filtering algorithm of targeting the warhead’s non-linear eigen-motion, and comes up with the method for accurate target tracking based on cubature Kalman filtering (CKF). Simulation results prove this proposed method to be of effectiveness. It is shown that this proposed method is of higher tracking accuracy and better stability in the process of processing the complex non-linear motion of space target, compared with those used widely, including the debiased converted measurement Kalman filtering, the extended Kalman filtering and the unscented Kalman filter.
Yan, Y.; Barth, A.; Beckers, J. M.; Brankart, J. M.; Brasseur, P.; Candille, G.
2017-07-01
In this paper, three incremental analysis update schemes (IAU 0, IAU 50 and IAU 100) are compared in the same assimilation experiments with a realistic eddy permitting primitive equation model of the North Atlantic Ocean using the Ensemble Kalman Filter. The difference between the three IAU schemes lies on the position of the increment update window. The relevance of each IAU scheme is evaluated through analyses on both thermohaline and dynamical variables. The validation of the assimilation results is performed according to both deterministic and probabilistic metrics against different sources of observations. For deterministic validation, the ensemble mean and the ensemble spread are compared to the observations. For probabilistic validation, the continuous ranked probability score (CRPS) is used to evaluate the ensemble forecast system according to reliability and resolution. The reliability is further decomposed into bias and dispersion by the reduced centred random variable (RCRV) score. The obtained results show that 1) the IAU 50 scheme has the same performance as the IAU 100 scheme 2) the IAU 50/100 schemes outperform the IAU 0 scheme in error covariance propagation for thermohaline variables in relatively stable region, while the IAU 0 scheme outperforms the IAU 50/100 schemes in dynamical variables estimation in dynamically active region 3) in case with sufficient number of observations and good error specification, the impact of IAU schemes is negligible. The differences between the IAU 0 scheme and the IAU 50/100 schemes are mainly due to different model integration time and different instability (density inversion, large vertical velocity, etc.) induced by the increment update. The longer model integration time with the IAU 50/100 schemes, especially the free model integration, on one hand, allows for better re-establishment of the equilibrium model state, on the other hand, smooths the strong gradients in dynamically active region.
Object Visual Tracking Using Window-Matching Techniques and Kalman Filtering
2010-01-01
This work presented an algorithm for tracking objects from a sequence of images. The algorithm is based on a window matching approach that uses as a similarity measurement the sum of the square differences (SSD). In order to improve the tracking performance under
Brad Baxter; Liam Graham; Stephen Wright
2007-01-01
We relax the assumption of full information that underlies most dynamic general equilibrium models, and instead assume agents optimally form estimates of the states from an incomplete information set. We derive a version of the Kalman filter that is endogenous to agents' optimising decisions, and state conditions for its convergence. We show the (restrictive) conditions under which the endogenous Kalman filter will at least asymptotically reveal the true states. In general we show that incomp...
Reduced-order Kalman filtering with incomplete observability
Yonezawa, K.
1980-01-01
Kalman filtering is considered with reference to linear stochastic dynamic systems without complete observability. It is shown that the canonical decomposition theorem can be extended to the stochastic case and the matrix Riccati equation of the Kalman filter is order-reducible if some states are not observable. The inclusion of unobservable states in Kalman filtering makes the unobservable states 'asymptotically' observable in the filter if these unobservable states are dynamically connected to observable states and asymptotically stable. The reduced-order Kalman filter saves computation time when compared to the conventional Kalman filter.
Directory of Open Access Journals (Sweden)
Guohu Feng
2012-06-01
Full Text Available A matrix Kalman filter (MKF has been implemented for an integrated navigation system using visual/inertial/magnetic sensors. The MKF rearranges the original nonlinear process model in a pseudo-linear process model. We employ the observability rank criterion based on Lie derivatives to verify the conditions under which the nonlinear system is observable. It has been proved that such observability conditions are: (a at least one degree of rotational freedom is excited, and (b at least two linearly independent horizontal lines and one vertical line are observed. Experimental results have validated the correctness of these observability conditions.
Evaluation of Local Ensemble Transform Kalman Filter System for the Global FSU Atmospheric Model
Cintra, R. S.; Cocke, S.
2014-12-01
This paper shows the results of a implementation of the data assimilation system to obtain the initial condition to the atmospheric general circulation model (AGCM) for the Florida State University/USA. The better quality of forecasts is given the more accurate the estimate of the initial conditions. The process of combining observations and short-range forecast to obtain an analysis is called data assimilation. The data assimilation system called "Local ensemble transform Kalman filter (LETKF) is implemented. A prediction estimates ensemble in state space represents the model errors in that scheme. The LETKF is tested with the AGCM Florida State University Global Spectral Model (FSUGSM). The model is a multilevel (27 vertical levels) spectral primitive equation model with a vertical σ-coordinate. All variables are expanded horizontally in a truncated series of spherical harmonic functions (at resolution T63) and a transform technique is applied to calculate the physical processes in real space. The LETKF data assimilation experiments are based in two types of the synthetic observations data (surface pressure, absolute temperature, zonal component wind, meridional component wind and humidity) to evaluate the LETKF system for FSUGSM. The data assimilation experiments are based on observational systems simulation experiments where the "nature" is assumed to be known, and adding random noise to the nature run. The first experiment, the "nature" fields are the FSUGSM forecasts without data assimilation, afterwards, we use the "National Centers for Environment Prediction" reanalysis to obtain the "nature" fields. The observations are localized at every other grid point of the model. The forecast ensemble size is 20 members. The numerical experiments have a one-month assimilation cycle, for the period 01/01/2001 to 31/01/2001 at (00, 06, 12 and 18 GMT) for each day. We compare the behavior of the model by comparing with its forecast, observations and nature fields. A
Tracking and convergence of multi-channel kalman filters for active noise control
Berkhoff, A.; Ophem, S. van
2013-01-01
The feed-forward broadband active noise control problem can be formulated as a state estimation problem to achieve a faster rate of convergence than the filtered reference least mean squares algorithm and possibly also a better tracking performance. A multiple input/multiple output Kalman algorithm
Tracking and convergence of multi-channel Kalman filters for active noise control
Berkhoff, A.P.; Ophem, S. van
2013-01-01
The feed-forward broadband active noise control problem can be formulated as a state estimation problem to achieve a faster rate of convergence than the filtered reference least mean squares algorithm and possibly also a better tracking performance. A multiple input/multiple output Kalman algorithm
Tracking of Two Dimensional Based On Kalman Filtering%基于Kalman滤波的图像雅克比矩阵在线估计
Institute of Scientific and Technical Information of China (English)
刘广瑞; 黄真; 韩莉莉; 毕竞锴
2013-01-01
视觉伺服机器人主要是通过系统的图像雅克比矩阵表述机器人系统的特征空间进行反馈控制.首先建立了SCARA型机器人系统,针对系统图像雅克比矩阵的物理意义,利用雅克比矩阵增量AJ建立系统状态方程,以Kalman滤波的方法对系统雅克比矩阵进行在线估计.在Matlab仿真的基础上对此方法进行分析,并将其运用于二维目标的跟踪,实验表明此方法的有效性.%The control of the visual-servo robot is feedback controlled through presenting the feature space of robot system by the graphic Jacobimatrix of the systerm. A SCARA robot system is established firstly. In view of the physical meaning of the system Jacobianmatrix, the system state equation would be built according to the incremental of Jacobionmatrix, then the Jacabian matrix would be estimated on-line through the Kalman filtering. This method is analyzed based on the MATLAB simulation and applied to the tracking of the two dimensional target, and the validity of this method was tested finally.
Particle Kalman Filtering: A Nonlinear Framework for Ensemble Kalman Filters
Hoteit, Ibrahim
2010-09-19
Optimal nonlinear filtering consists of sequentially determining the conditional probability distribution functions (pdf) of the system state, given the information of the dynamical and measurement processes and the previous measurements. Once the pdfs are obtained, one can determine different estimates, for instance, the minimum variance estimate, or the maximum a posteriori estimate, of the system state. It can be shown that, many filters, including the Kalman filter (KF) and the particle filter (PF), can be derived based on this sequential Bayesian estimation framework. In this contribution, we present a Gaussian mixture‐based framework, called the particle Kalman filter (PKF), and discuss how the different EnKF methods can be derived as simplified variants of the PKF. We also discuss approaches to reducing the computational burden of the PKF in order to make it suitable for complex geosciences applications. We use the strongly nonlinear Lorenz‐96 model to illustrate the performance of the PKF.
Low-Rank Kalman Filtering in Subsurface Contaminant Transport Models
El Gharamti, Mohamad
2010-12-01
Understanding the geology and the hydrology of the subsurface is important to model the fluid flow and the behavior of the contaminant. It is essential to have an accurate knowledge of the movement of the contaminants in the porous media in order to track them and later extract them from the aquifer. A two-dimensional flow model is studied and then applied on a linear contaminant transport model in the same porous medium. Because of possible different sources of uncertainties, the deterministic model by itself cannot give exact estimations for the future contaminant state. Incorporating observations in the model can guide it to the true state. This is usually done using the Kalman filter (KF) when the system is linear and the extended Kalman filter (EKF) when the system is nonlinear. To overcome the high computational cost required by the KF, we use the singular evolutive Kalman filter (SEKF) and the singular evolutive extended Kalman filter (SEEKF) approximations of the KF operating with low-rank covariance matrices. The SEKF can be implemented on large dimensional contaminant problems while the usage of the KF is not possible. Experimental results show that with perfect and imperfect models, the low rank filters can provide as much accurate estimates as the full KF but at much less computational cost. Localization can help the filter analysis as long as there are enough neighborhood data to the point being analyzed. Estimating the permeabilities of the aquifer is successfully tackled using both the EKF and the SEEKF.
Kalman filtering theory and practice with MATLAB
Grewal, M
2015-01-01
The definitive textbook and professional reference on Kalman Filtering fully updated, revised, and expanded This book contains the latest developments in the implementation and application of Kalman filtering. Authors Grewal and Andrews draw upon their decades of experience to offer an in-depth examination of the subtleties, common pitfalls, and limitations of estimation theory as it applies to real-world situations. They present many illustrative examples including adaptations for nonlinear filtering, global navigation satellite systems, the error modeling of gyros and accelerometers, inertial navigation systems, and freeway traffic control. Kalman Filtering: Theory and Practice Using MATLAB, Fourth Edition is an ideal textbook in advanced undergraduate and beginning graduate courses in stochastic processes and Kalman filtering. It is also appropriate for self-instruction or review by practicing engineers and scientists who want to learn more about this important topic.
Aguirre, Luis Antonio; Teixeira, Bruno Otávio S.; Tôrres, Leonardo Antônio B.
2005-08-01
This paper addresses the problem of state estimation for nonlinear systems by means of the unscented Kalman filter (UKF). Compared to the traditional extended Kalman filter, the UKF does not require the local linearization of the system equations used in the propagation stage. Important results using the UKF have been reported recently but in every case the system equations used by the filter were considered known. Not only that, such models are usually considered to be differential equations, which requires that numerical integration be performed during the propagation phase of the filter. In this paper the dynamical equations of the system are taken to be difference equations—thus avoiding numerical integration—and are built from data without prior knowledge. The identified models are subsequently implemented in the filter in order to accomplish state estimation. The paper discusses the impact of not knowing the exact equations and using data-driven models in the context of state and joint state-and-parameter estimation. The procedure is illustrated by means of examples that use simulated and measured data.
A mollified Ensemble Kalman filter
Bergemann, Kay
2010-01-01
It is well recognized that discontinuous analysis increments of sequential data assimilation systems, such as ensemble Kalman filters, might lead to spurious high frequency adjustment processes in the model dynamics. Various methods have been devised to continuously spread out the analysis increments over a fixed time interval centered about analysis time. Among these techniques are nudging and incremental analysis updates (IAU). Here we propose another alternative, which may be viewed as a hybrid of nudging and IAU and which arises naturally from a recently proposed continuous formulation of the ensemble Kalman analysis step. A new slow-fast extension of the popular Lorenz-96 model is introduced to demonstrate the properties of the proposed mollified ensemble Kalman filter.
Unscented Kalman filter for SINS alignment
Institute of Scientific and Technical Information of China (English)
Zhou Zhanxin; Gao Yanan; Chen Jiabin
2007-01-01
In order to improve the filter accuracy for the nonlinear error model of strapdown inertial navigation system (SINS) alignment, Unscented Kalman Filter (UKF) is presented for simulation with stationary base and moving base of SINS alignment.Simulation results show the superior performance of this approach when compared with classical suboptimal techniques such as extended Kalman filter in cases of large initial misalignment.The UKF has good performance in case of small initial misalignment.
Application of the Multimodel Ensemble Kalman Filter Method in Groundwater System
Directory of Open Access Journals (Sweden)
Liang Xue
2015-02-01
Full Text Available With the development of in-situ monitoring techniques, the ensemble Kalman filter (EnKF has become a popular data assimilation method due to its capability to jointly update model parameters and state variables in a sequential way, and to assess the uncertainty associated with estimation and prediction. To take the conceptual model uncertainty into account during the data assimilation process, a novel multimodel ensemble Kalman filter method has been proposed by incorporating the standard EnKF with Bayesian model averaging framework. In this paper, this method is applied to analyze the dataset obtained from the Hailiutu River Basin located in the northwest part of China. Multiple conceptual models are created by considering two important factors that control groundwater dynamics in semi-arid areas: the zonation pattern of the hydraulic conductivity field and the relationship between evapotranspiration and groundwater level. The results show that the posterior model weights of the postulated models can be dynamically adjusted according to the mismatch between the measurements and the ensemble predictions, and the multimodel ensemble estimation and the corresponding uncertainty can be quantified.
Kalman Filter Real Time Tracking Using Microprocessors and a New Language for Military Software.
1986-03-27
to re-compile at each run. Script files read much like English , so they are both easy to understand and create. Script Commands Available Each of the...Fortran Scientific Subroutine Library, John Wiley & Sons,Inc, 1984. 11. CIE Systems, Regulus Reference Manual, Bussiness Computer Operating Systems...Reference Series, Bussiness Computer Software Library, 6 DR8-0012-001, 68 DOC-3041, Second Revision. 242 INITIAL DISTRIBUTION LIST No. Copies 1. Defense
Autonomous underwater vehicle motion tracking using a Kalman filter for sensor fusion
CSIR Research Space (South Africa)
Holtzhausen, S
2008-11-01
Full Text Available to be discussed is the IMU. This sensor system consists of three accelerometers and three gyros. The accelerometers are positioned on the X, Y and Z axes and measure acceleration in their respective directions. 15th International conference on Mechatronics... of the vehicle. The accelerometer data can be used to determine linear motion by calculating the double integral of the accelerometer data over time. This will give the calculated movement of the vehicle in the given direction. The accelerometer data can also...
Directory of Open Access Journals (Sweden)
Hongjie Wu
2013-01-01
Full Text Available State of charge (SOC is a critical factor to guarantee that a battery system is operating in a safe and reliable manner. Many uncertainties and noises, such as fluctuating current, sensor measurement accuracy and bias, temperature effects, calibration errors or even sensor failure, etc. pose a challenge to the accurate estimation of SOC in real applications. This paper adds two contributions to the existing literature. First, the auto regressive exogenous (ARX model is proposed here to simulate the battery nonlinear dynamics. Due to its discrete form and ease of implemention, this straightforward approach could be more suitable for real applications. Second, its order selection principle and parameter identification method is illustrated in detail in this paper. The hybrid pulse power characterization (HPPC cycles are implemented on the 60AH LiFePO4 battery module for the model identification and validation. Based on the proposed ARX model, SOC estimation is pursued using the extended Kalman filter. Evaluation of the adaptability of the battery models and robustness of the SOC estimation algorithm are also verified. The results indicate that the SOC estimation method using the Kalman filter based on the ARX model shows great performance. It increases the model output voltage accuracy, thereby having the potential to be used in real applications, such as EVs and HEVs.
卡尔曼滤波抗积分饱和PDF控制系统研究%Research on Kalman Filtering Anti-integral Saturation PDF Control System
Institute of Scientific and Technical Information of China (English)
鄢华林; 祁圣民
2015-01-01
针对非接触式登船梯控制系统在实际工作中不可避免地受到干扰信号的影响这一问题，提出了卡尔曼滤波抗积分饱和PDF控制系统。该控制系统主要由PDF控制器、抗积分饱和控制器和卡尔曼滤波器三个部分组成。卡尔曼滤波抗积分饱和PDF控制系统具有优良的控制性能和动态品质。该控制系统能快速跟踪设定的参考信号且无超调与振荡出现，同时能抑制白噪声的污染。仿真结果表明，该控制系统提高了系统的自适应与鲁棒性。%In practical operation, the non-contact control system of boarding ladder is inevitably affected by interference signals, the design of Kalman filtering anti-integral saturation PDF control system is proposed. This control system mainly consists of three parts, i. e. , PDF controller, anti-integral saturation controller and Kalman filter. This control system possesses excellent control performance and dynamic quality, it can fast track the reference signal without overshoot or oscillation, and white noise pollution can be restrained. The result of simulation indicates that the control system improves the robustness and adaptation of the system.
Multilevel ensemble Kalman filtering
Hoel, Haakon
2016-01-08
The ensemble Kalman filter (EnKF) is a sequential filtering method that uses an ensemble of particle paths to estimate the means and covariances required by the Kalman filter by the use of sample moments, i.e., the Monte Carlo method. EnKF is often both robust and efficient, but its performance may suffer in settings where the computational cost of accurate simulations of particles is high. The multilevel Monte Carlo method (MLMC) is an extension of classical Monte Carlo methods which by sampling stochastic realizations on a hierarchy of resolutions may reduce the computational cost of moment approximations by orders of magnitude. In this work we have combined the ideas of MLMC and EnKF to construct the multilevel ensemble Kalman filter (MLEnKF) for the setting of finite dimensional state and observation spaces. The main ideas of this method is to compute particle paths on a hierarchy of resolutions and to apply multilevel estimators on the ensemble hierarchy of particles to compute Kalman filter means and covariances. Theoretical results and a numerical study of the performance gains of MLEnKF over EnKF will be presented. Some ideas on the extension of MLEnKF to settings with infinite dimensional state spaces will also be presented.
A class of quaternion Kalman filters.
Jahanchahi, Cyrus; Mandic, Danilo P
2014-03-01
The existing Kalman filters for quaternion-valued signals do not operate fully in the quaternion domain, and are combined with the real Kalman filter to enable the tracking in 3-D spaces. Using the recently introduced HR-calculus, we develop the fully quaternion-valued Kalman filter (QKF) and quaternion-extended Kalman filter (QEKF), allowing for the tracking of 3-D and 4-D signals directly in the quaternion domain. To consider the second-order noncircularity of signals, we employ the recently developed augmented quaternion statistics to derive the widely linear QKF (WL-QKF) and widely linear QEKF (WL-QEKF). To reduce computational requirements of the widely linear algorithms, their efficient implementation are proposed and it is shown that the quaternion widely linear model can be simplified when processing 3-D data, further reducing the computational requirements. Simulations using both synthetic and real-world circular and noncircular signals illustrate the advantages offered by widely linear over strictly linear quaternion Kalman filters.
Steady-State Performance of Kalman Filter for DPLL
Institute of Scientific and Technical Information of China (English)
QIAN Yi; CUI Xiaowei; LU Mingquan; FENG Zhenming
2009-01-01
For certain system models, the structure of the Kalman filter is equivalent to a second-order vari-able gain digital phase-locked loop (DPLL). To apply the knowledge of DPLLs to the design of Kalman filters, this paper studies the steady-state performance of Kalman filters for these system models. The results show that the steady-state Kalman gain has the same form as the DPLL gain. An approximate simple form for the steady-state Kalman gain is used to derive an expression for the equivalent loop bandwidth of the Kalman filter as a function of the process and observation noise variances. These results can be used to analyze the steady-state performance of a Kalman filter with DPLL theory or to design a Kalman filter model with the same steady-state performance as a given DPLL.
Phan, Anh Tuan; Ho, Duc Du; Hermann, Gilles; Wira, Patrice
2015-12-01
For power quality issues like reducing harmonic pollution, reactive power and load unbalance, the estimation of the fundamental frequency of a power lines in a fast and precise way is essential. This paper introduces a new state-space model to be used with an extended Kalman filter (EKF) for estimating the frequency of distorted power system signals in real-time. The proposed model takes into account all the characteristics of a general three-phase power system and mainly the unbalance. Therefore, the symmetrical components of the power system, i.e., their amplitude and phase angle values, can also be deduced at each iteration from the proposed state-space model. The effectiveness of the method has been evaluated. Results and comparisons of online frequency estimation and symmetrical components identification show the efficiency of the proposed method for disturbed and time-varying signals.
Fallahi, Kia; Raoufi, Reza; Khoshbin, Hossein
2008-07-01
In recent years chaotic secure communication and chaos synchronization have received ever increasing attention. In this paper a chaotic communication method using extended Kalman filter is presented. The chaotic synchronization is implemented by EKF design in the presence of channel additive noise and processing noise. Encoding chaotic communication is used to achieve a satisfactory, typical secure communication scheme. In the proposed system, a multi-shift cipher algorithm is also used to enhance the security and the key cipher is chosen as one of the chaos states. The key estimate is employed to recover the primary data. To illustrate the effectiveness of the proposed scheme, a numerical example based on Chen dynamical system is presented and the results are compared to two other chaotic systems.
Rigatos, Gerasimos G
2016-06-01
It is proven that the model of the p53-mdm2 protein synthesis loop is a differentially flat one and using a diffeomorphism (change of state variables) that is proposed by differential flatness theory it is shown that the protein synthesis model can be transformed into the canonical (Brunovsky) form. This enables the design of a feedback control law that maintains the concentration of the p53 protein at the desirable levels. To estimate the non-measurable elements of the state vector describing the p53-mdm2 system dynamics, the derivative-free non-linear Kalman filter is used. Moreover, to compensate for modelling uncertainties and external disturbances that affect the p53-mdm2 system, the derivative-free non-linear Kalman filter is re-designed as a disturbance observer. The derivative-free non-linear Kalman filter consists of the Kalman filter recursion applied on the linearised equivalent of the protein synthesis model together with an inverse transformation based on differential flatness theory that enables to retrieve estimates for the state variables of the initial non-linear model. The proposed non-linear feedback control and perturbations compensation method for the p53-mdm2 system can result in more efficient chemotherapy schemes where the infusion of medication will be better administered.
卡尔曼滤波在目标跟踪中的研究与应用%Study and application of Kalman filtering for target tracking
Institute of Scientific and Technical Information of China (English)
刘静; 姜恒; 石晓原
2011-01-01
The Kalman filtering algorithm is the most use in now stage in radar signal processing. According to the nonlinear sport and the linear sport in goal sport model the paper designs two models combining the actual condition of the air goal of radar tracking. And it realizes interaction multiple model algorithm using Markov state transfer matrix. And finally for interaction multiple model Kalman filtering it carries out emulation and interpretation of result.%卡尔曼滤波算法是现阶段雷达信号处理中最常用的跟踪算法,结合雷达跟踪的空中目标的实际情况,针对目标运动模型中的线性运动和非线性运动模型,分别设计了两种模型,并利用马尔可夫状态转移矩阵实现交互多模算法.最后对交互多模型卡尔曼滤波算法进行了Matlab仿真及结果分析.
基于卡尔曼滤波的运动人体跟踪算法研究%Research on Moving Human Tracking Algorithm Based on Kalman Filter
Institute of Scientific and Technical Information of China (English)
乔坤; 郭朝勇; 史进伟
2012-01-01
提出一种基于卡尔曼滤波的运动目标快速跟踪算法.利用卡尔曼滤波器的预测功能,预测运动人体目标在下一帧中的位置,在Matlab仿真环境下实现该跟踪算法,实验结果表明:该算法对人体目标的运动趋势能够做出正确的预测估计,跟踪效果和性能较为稳定和可靠.此外,该算法将图像全局搜索问题转换为局部搜索,使运算量减少,满足实时性跟踪要求,实现了对运动目标的快速跟踪.%A real-time moving object tracking algorithm based on Kalman filter is proposed The possible position of the moving human in the next frame is predicted by Kalman filter's predictive function. Based on the Matlab simulation environment to achieve the tracking algorithm and the experimental results show that the algorithm can correctly estimate the human's motion trend and the tracking results and performance is better. In addition, the global searching scope of an image is converted to local scope, thus reduce the computation and meet the requirements of real-time tracking, and the speedy tracking of moving human is realized.
Research on Kalman-filter based multisensor data fusion
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
Multisensor data fusion has played a significant role in diverse areas ranging from local robot guidance to global military theatre defense etc.Various multisensor data fusion methods have been extensively investigated by researchers,of which Klaman filtering is one of the most important.Kalman filtering is the best-known recursive least mean-square algorithm to optimally estimate the unknown.states of a dynamic system,which has found widespread application in many areas.The scope of the work is restricted to investigate the various data fusion and track fusion techniques based on the Kalman Filter methods.then a new method of state fusion is proposed.Finally the simulation results demonstrate the effectiveness of the introduced method.
Directory of Open Access Journals (Sweden)
Chih-Chien Tsai
2014-03-01
Full Text Available This study develops a Doppler radar data assimilation system, which couples the local ensemble transform Kalman filter with the Weather Research and Forecasting model. The benefits of this system to quantitative precipitation nowcasting (QPN are evaluated with observing system simulation experiments on Typhoon Morakot (2009, which brought record-breaking rainfall and extensive damage to central and southern Taiwan. The results indicate that the assimilation of radial velocity and reflectivity observations improves the three-dimensional winds and rain-mixing ratio most significantly because of the direct relations in the observation operator. The patterns of spiral rainbands become more consistent between different ensemble members after radar data assimilation. The rainfall intensity and distribution during the 6-hour deterministic nowcast are also improved, especially for the first 3 hours. The nowcasts with and without radar data assimilation have similar evolution trends driven by synoptic-scale conditions. Furthermore, we carry out a series of sensitivity experiments to develop proper assimilation strategies, in which a mixed localisation method is proposed for the first time and found to give further QPN improvement in this typhoon case.
Institute of Scientific and Technical Information of China (English)
肖进丽; 刘明俊; 刘克中
2012-01-01
在船舶交通服务系统(Vessel Traffic Services,VTS)利用多台雷达组成的雷达网中,如果雷达的系统误差未经配准就进行多雷达数据融合,则会使融合结果不可信而严重影响其航迹跟踪质量.平方根无味卡尔曼滤波 (Square-root Unscented Kalman Filter,SRUKF)是一种改进的无味卡尔曼滤波(Unscented Kalman Filter,UKF)算法,它借鉴了平方根卡尔曼滤波(Square-root Kalman Filter,SRKF)能克服滤波发散的思想来设计滤波器,不仅具备无味卡尔曼滤波的全部优点,而且克服了无味卡尔曼滤波由于滤波数值计算中舍入误差的积累而容易导致协方差矩阵失去非负定性的缺点,具有更好的数值稳定性.利用平方根无味卡尔曼滤波实现船舶交通服务系统中的雷达网系统误差配准,并通过Matlab仿真对该方法和无味卡尔曼滤波的滤波性能进行了比较,仿真结果验证了该方法的可行性和有效性.%In multi-radar network of VTS, to improve the reliability and quality of target tracking through multiple radar data fusion, it is necessary to register system errors of the radars. Since Square-root Unscented Kalman Filter ( SRUKF) , a modified filtering algorithm based on Unscented Kalman Filter (UKF) , has higher estimation precision and better filtering stability Compared with UKF, it is introduced for error registration of VTS radar networks. Matlab simulation results validated the algorithm.
基于眨眼修正卡尔曼滤波的人眼跟踪研究%Research on Eye Tracking Based on Blinking Correction Kalman Filter
Institute of Scientific and Technical Information of China (English)
张琳琳; 蒋敏; 唐晓微
2012-01-01
Eye movement is easily influenced by head posture change, external simulation interference and actual light conditions. The existing algorithms have low accuracy and robustness. An eye tracking algorithm based on blinking correction Kalman filter is proposed. Eye region of face image is detected using vertical and horizontal integral projection function. It uses the color entropy of eye region to eliminate uncorrelated factors, precisely locates the position of pupil. The eye region is tracked in real time by Kalman filter, and eye blink detection is combined to revise eye tracking. Experimental results show that the algorithm has high accuracy and good real-time.%眼睛运动容易受到头部姿势变化、外界仿真干扰、实际光照条件等影响,已有眼部跟踪算法的准确率、鲁棒性较低.为此,提出一种基于眨眼修正卡尔曼滤波的人眼跟踪算法.采用垂直积分投影函数和水平积分投影函数得到人脸图像的眼睛区域,运用眼睛区域的颜色熵消除不相关因素,定位出瞳孔的位置,用卡尔曼滤波进行实时眼部跟踪,结合眨眼检测实时修正跟踪结果.实验结果表明,该算法准确率较高,实时性较好.
Self-tuning decoupled fusion Kalman filter based on the Riccati equation
Institute of Scientific and Technical Information of China (English)
Xiaojun SUN; Peng ZHANG; Zili DENG
2008-01-01
An online noise variance estimator for multi-sensor systems with unknown noise variances is proposed by using the correlation method. Based on the Riccati equa-tion and optimal fusion rule "weighted by scalars for state components, a self-tuning component decoupled informa-tion fusion Kalman filter is presented. It is proved that the filter converges to the optimal fusion Kalman filter in a realization by dynamic error system analysis method, so that it has asymptotic optimality. Its effectiveness is demon-strated by simulation for a tracking system with 3 sensors.
基于Kalman预测和K-近邻的多目标跟踪%Tracking of Muti-objects Base on Algorithm of Kalman Filter and Knn
Institute of Scientific and Technical Information of China (English)
曹作宝; 包晓敏; 汪亚明; 周砚江
2011-01-01
In this paper, directing at the strong points and weak points of Kalman filter based on tracking method, a novel approach to tracking of muti-objects is studied. By using Kalman-filter, the researchers predict locations where objects most probably appear in a next-frame, determine the search radius and k, calculate the shortest Euclidean distance with the predicted target object in this radius by using k-nearest neighbor, and then determine the true target location. Based on the MATLAB simulation environment to achieve the tracking algorithm, experimental results show that tracking results and performance is better. In addition, selecting a reasonable k values, can reduce the computation and speed up the system processing speed.%针对Kalman预测跟踪和K-近邻数据关联算法的优缺点,研究一种基于Kalman预测和K-近邻的多目标跟踪方法.该方法首先利用Kalman滤波预测出运动目标在下一帧中最可能出现的位置,接着根据当前帧目标位置和预测目标位置的距离,确定搜索半径,利用K-近邻数据关联算法,在该半径范围内,计算与预测点欧式距离最短的目标,并将其确定为真实目标位置.在MATLAB仿真环境下实现该跟踪算法,实验结果表明,用该方法进行多目标跟踪时,跟踪效果和性能较为稳定和可靠.此外选择合理的K值,能减少运算量,加快系统处理速度.
Institute of Scientific and Technical Information of China (English)
刘亚雷; 颐晓辉
2011-01-01
为了研究运动声阵列对二维目标在复杂环境中的实时跟踪性问题,根据运动声阵列及二维目标的运动特点建立了状态方程与测量方程,并将其描述为块的形式.根据不同的状态块,利用小波变换把状态块分解到不同尺度上,分别在时域和频域上建立相应尺度上的状态与观测信息之间的关系；采取卡尔曼滤波器递推思想来实现运动声阵列的多尺度贯序式卡尔曼滤波算法,根据最小二乘误差估计理论推导了运动声阵列跟踪系统在球坐标系和直角坐标系下的误差,为提高系统跟踪精度奠定了理论基础,并为工程应用提供了实际方法.与传统的卡尔曼滤波算法相比,Matlab仿真结果表明了本文算法的有效性和优越性.%In order to study the motion acoustic array's real-time tracking to two-dimensional target in complex environment, the state equation and measurement equation based on the motion characteristics of dynamic acoustic array and two-dimensional target are established and converted into block form. Then, the state blocks are assigned onto different scales by wavelet transform. The relationship between the state and the measurement information in corresponding scale is established in time domain and frequency domain. After that, the multi-scale sequential Kalman filter algorithm is obtained based on the Kalman filter recursive theory, and the errors of motion acoustic array tracking system in spherical coordinates and rectangular coordinates are deduced by least square error estimation, which lays the theoretical foundation for improving the system tracking precision and provides a practical method for application. Compared with the traditional Kalman filter algorithm, the presented algorithm shows its validity and superiority in Matlab simulation.
DEFF Research Database (Denmark)
Drecourt, J.-P.; Madsen, H.; Rosbjerg, Dan
2006-01-01
. The colored noise filter formulation is extended to correct both time correlated and uncorrelated model error components. A more stable version of the separate filter without feedback is presented. The filters are implemented in an ensemble framework using Latin hypercube sampling. The techniques...... are illustrated on a simple one-dimensional groundwater problem. The results show that the presented filters outperform the standard Kalman filter and that the implementations with bias feedback work in more general conditions than the implementations without feedback. 2005 Elsevier Ltd. All rights reserved....
Multilevel ensemble Kalman filtering
Hoel, Hakon
2016-06-14
This work embeds a multilevel Monte Carlo sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF) in the setting of finite dimensional signal evolution and noisy discrete-time observations. The signal dynamics is assumed to be governed by a stochastic differential equation (SDE), and a hierarchy of time grids is introduced for multilevel numerical integration of that SDE. The resulting multilevel EnKF is proved to asymptotically outperform EnKF in terms of computational cost versus approximation accuracy. The theoretical results are illustrated numerically.
Robust Kriged Kalman Filtering
Energy Technology Data Exchange (ETDEWEB)
Baingana, Brian; Dall' Anese, Emiliano; Mateos, Gonzalo; Giannakis, Georgios B.
2015-11-11
Although the kriged Kalman filter (KKF) has well-documented merits for prediction of spatial-temporal processes, its performance degrades in the presence of outliers due to anomalous events, or measurement equipment failures. This paper proposes a robust KKF model that explicitly accounts for presence of measurement outliers. Exploiting outlier sparsity, a novel l1-regularized estimator that jointly predicts the spatial-temporal process at unmonitored locations, while identifying measurement outliers is put forth. Numerical tests are conducted on a synthetic Internet protocol (IP) network, and real transformer load data. Test results corroborate the effectiveness of the novel estimator in joint spatial prediction and outlier identification.
Institute of Scientific and Technical Information of China (English)
周君
2015-01-01
[Abstract]Kalman filter for radar surveillance technology in air traffic control systems were analyzed. Discuss the corresponding Kalman filtering techniques: Related adaptive Kalman filtering, multi-model adaptive Kalman filter, adaptive Kalman filter information based on neural network adaptive Kalman filtering, fuzzy logic adaptive Kalman filtering, and their main advantages and disadvantages of the problem.%对卡尔曼雷达滤波技术在空管监视系统中的应用进行了分析，讨论了相应的卡尔曼滤波技术：相关自适应卡尔曼滤波、多模型自适应卡尔曼滤波、基于信息的自适应卡尔曼滤波、神经网络自适应卡尔曼滤波、模糊逻辑自适应卡尔曼滤波，并对它们主要解决的问题及优缺点进行了分析。
Harmonic Detection at Initialization With Kalman Filter
DEFF Research Database (Denmark)
Hussain, Dil Muhammad Akbar; Imran, Raja Muhammad; Shoro, Ghulam Mustafa
2014-01-01
the affect of harmonics on the supply. For the detection of these harmonics various techniques are available and one of that technique is the Kalman filter. In this paper we investigate that what are the consequences when harmonic detection system based on Kalman Filtering is initialized......Most power electronic equipment these days generate harmonic disturbances, these devices hold nonlinear voltage/current characteristic. The harmonics generated can potentially be harmful to the consumer supply. Typically, filters are integrated at the power source or utility location to filter out...
Erna Apriliani; Dieky Adzkiya; Arief Baihaqi
2011-01-01
Kalman filter is an algorithm to estimate the state variable of dynamical stochastic system. The square root ensemble Kalman filter is an modification of Kalman filter. The square root ensemble Kalman filter is proposed to keep the computational stability and reduce the computational time. In this paper we study the efficiency of the reduced rank ensemble Kalman filter. We apply this algorithm to the non isothermal continue stirred tank reactor problem. We decompose the covariance of the ense...
Institute of Scientific and Technical Information of China (English)
周延延; 王柯; 高育鹏; 李小兵
2014-01-01
针对临近空间高超声速目标高度非线性、强耦合、高机动、时变参数、和独特气动特性等特点，综合运用军事运筹学理论与方法、系统建模技术、神经网络技术以及计算机仿真等，提出基于神经网络校正的扩展卡尔曼滤波(EKF)算法，并在高超声速目标跟踪中进行了应用研究。采取神经网络的学习能力来克服卡尔曼滤波发散问题，通过卡尔曼滤波后加一级误差处理环节使滤波收敛。仿真结果表明：该算法在目标发生较大机动时仍能保持较高的跟踪精度。%Aiming at the characteristics of nonlinearity,strong coupling and maneuvering,parameter varity and unique aerodynamics and so on in hypersonic vehicle,the method of neural network aided Kalman fil-tering for the near space hypersonic vehicle is proposed,and be applied to study of hypersonic target track-ing by synthetically applying military operational research theory and method,system modeling technique, neural network technique and computer simulation technique,etc.The basic thought is making use of study capability of BP neural network to overcome the divergence problem in extended Kalman filter.After the extended Kalman filter,adding an error processing section makes filter concentrated.The simulation study shows that the algorithm is better than ones by extended Kalman filter.The Algorithm will have certain reference in target interception of hypersonic vehicle in Near Space.
Directory of Open Access Journals (Sweden)
Xuebing Yuan
2015-05-01
Full Text Available Inertial navigation based on micro-electromechanical system (MEMS inertial measurement units (IMUs has attracted numerous researchers due to its high reliability and independence. The heading estimation, as one of the most important parts of inertial navigation, has been a research focus in this field. Heading estimation using magnetometers is perturbed by magnetic disturbances, such as indoor concrete structures and electronic equipment. The MEMS gyroscope is also used for heading estimation. However, the accuracy of gyroscope is unreliable with time. In this paper, a wearable multi-sensor system has been designed to obtain the high-accuracy indoor heading estimation, according to a quaternion-based unscented Kalman filter (UKF algorithm. The proposed multi-sensor system including one three-axis accelerometer, three single-axis gyroscopes, one three-axis magnetometer and one microprocessor minimizes the size and cost. The wearable multi-sensor system was fixed on waist of pedestrian and the quadrotor unmanned aerial vehicle (UAV for heading estimation experiments in our college building. The results show that the mean heading estimation errors are less 10° and 5° to multi-sensor system fixed on waist of pedestrian and the quadrotor UAV, respectively, compared to the reference path.
Directory of Open Access Journals (Sweden)
Xin Li
2016-02-01
Full Text Available Wireless signal strength is susceptible to the phenomena of interference, jumping, and instability, which often appear in the positioning results based on Wi-Fi field strength fingerprint database technology for indoor positioning. Therefore, a Wi-Fi and PDR (pedestrian dead reckoning real-time fusion scheme is proposed in this paper to perform fusing calculation by adaptively determining the dynamic noise of a filtering system according to pedestrian movement (straight or turning, which can effectively restrain the jumping or accumulation phenomena of wireless positioning and the PDR error accumulation problem. Wi-Fi fingerprint matching typically requires a quite high computational burden: To reduce the computational complexity of this step, the affinity propagation clustering algorithm is adopted to cluster the fingerprint database and integrate the information of the position domain and signal domain of respective points. An experiment performed in a fourth-floor corridor at the School of Environment and Spatial Informatics, China University of Mining and Technology, shows that the traverse points of the clustered positioning system decrease by 65%–80%, which greatly improves the time efficiency. In terms of positioning accuracy, the average error is 4.09 m through the Wi-Fi positioning method. However, the positioning error can be reduced to 2.32 m after integration of the PDR algorithm with the adaptive noise extended Kalman filter (EKF.
Directory of Open Access Journals (Sweden)
T. O. Ting
2014-01-01
Full Text Available In this work, a state-space battery model is derived mathematically to estimate the state-of-charge (SoC of a battery system. Subsequently, Kalman filter (KF is applied to predict the dynamical behavior of the battery model. Results show an accurate prediction as the accumulated error, in terms of root-mean-square (RMS, is a very small value. From this work, it is found that different sets of Q and R values (KF’s parameters can be applied for better performance and hence lower RMS error. This is the motivation for the application of a metaheuristic algorithm. Hence, the result is further improved by applying a genetic algorithm (GA to tune Q and R parameters of the KF. In an online application, a GA can be applied to obtain the optimal parameters of the KF before its application to a real plant (system. This simply means that the instantaneous response of the KF is not affected by the time consuming GA as this approach is applied only once to obtain the optimal parameters. The relevant workable MATLAB source codes are given in the appendix to ease future work and analysis in this area.
Ting, T O; Man, Ka Lok; Lim, Eng Gee; Leach, Mark
2014-01-01
In this work, a state-space battery model is derived mathematically to estimate the state-of-charge (SoC) of a battery system. Subsequently, Kalman filter (KF) is applied to predict the dynamical behavior of the battery model. Results show an accurate prediction as the accumulated error, in terms of root-mean-square (RMS), is a very small value. From this work, it is found that different sets of Q and R values (KF's parameters) can be applied for better performance and hence lower RMS error. This is the motivation for the application of a metaheuristic algorithm. Hence, the result is further improved by applying a genetic algorithm (GA) to tune Q and R parameters of the KF. In an online application, a GA can be applied to obtain the optimal parameters of the KF before its application to a real plant (system). This simply means that the instantaneous response of the KF is not affected by the time consuming GA as this approach is applied only once to obtain the optimal parameters. The relevant workable MATLAB source codes are given in the appendix to ease future work and analysis in this area.
Data assimilation in the early phase: Kalman filtering RIMPUFF
DEFF Research Database (Denmark)
Astrup, P.; Turcanu, C.; Puch, R.O.;
2004-01-01
of RODOS (Realtime Online DecisiOn Support system for nuclear emergencies) – has been developed. It is built on the Kalman filtering algorithm and it assimilates 10-minute averaged gamma dose rates measured atground level stations. Since the gamma rates are non-linear functions of the state vector...... variables, the applied Kalman filter is the so-called Extended Kalman filter. In more ways the implementation is non standard: 1) the number of state vectorvariables varies with time, and 2) the state vector variables are prediction updated with 1-minute time steps but only Kalman filtered every 10 minutes......, and this based on time averaged measurements. Given reasonable conditions, i.e. a spatially densedistribution of gamma monitors and a realistic wind field, the developed ADUM module is found to be able to enhance the prediction of the gamma dose field. Based on some of the Kalman filtering parameters, another...
Liquid Level Estimation in Dynamic Condition using Kalman Filter
Directory of Open Access Journals (Sweden)
Sagar Kapale
2016-08-01
Full Text Available The aim of this paper is to estimate true liquid level of tank from noisy measurements due to dynamic conditions using kalman filter algorithm. We proposed kalman filter based approach to reduce noise in liquid level measurement system due to effect like sloshing. The function of kalman filter is to reduce error in liquid level measurement that produced from sensor resulting from effect like sloshing in dynamic environment. A prototype model was constructed and placed in dynamic condition, level data was acquired using ultrasonic sensor to verify the effectiveness of kalman filter. The tabulated data are shown for comparison of accuracy and error analysis between both measurements with Kalman filter and statistical averaging filter. After several test with different liquid levels and analysis of the recorded data, the technique shows the usefulness in liquid level measurement application in dynamic condition.
Kalman filter based algorithms for PANDA rate at FAIR
Energy Technology Data Exchange (ETDEWEB)
Prencipe, Elisabetta; Ritman, James [IKP, Forschungszentrum Juelich (Germany); Rauch, Johannes [E18, Technische Universitaet Muenchen (Germany); Collaboration: PANDA-Collaboration
2015-07-01
PANDA at the future FAIR facility in Darmstadt is an experiment with a cooled antiproton beam in a range between 1.5 and 15 GeV/c, allowing a wide physics program in nuclear and particle physics. High average reaction rates up to 2.10{sup 7} interactions/s are expected. PANDA is the only experiment worldwide, which combines a solenoid field and a dipole field in an experiment with a fixed target topology. The tracking system must be able to reconstruct high momenta in the laboratory frame. The tracking system of PANDA involves the presence of a high performance silicon vertex detector, a GEM detector, a Straw-Tubes central tracker, a forward tracking system, and a luminosity monitor. The first three of those, are inserted in a solenoid homogeneous magnetic field (B=2 T), the latter two are inside a dipole magnetic field (B=2 Tm), The offline tracking algorithm is developed within the PandaRoot framework, which is a part of the FAIRRoot project. The algorithm is based on a tool containing the Kalman Filter equations and a deterministic annealing filter (GENFIT). The Kalman-Filter-based routines can perform extrapolations of track parameters and covariance matrices. In GENFIT2, the Runge-Kutta track representation is available. First results of an implementation of GENFIT2 in PandaRoot are presented. Resolutions and efficiencies for different beam momenta and different track hypotheses are shown.
Directory of Open Access Journals (Sweden)
Lili Lei
2012-05-01
Full Text Available A hybrid data assimilation approach combining nudging and the ensemble Kalman filter (EnKF for dynamic analysis and numerical weather prediction is explored here using the non-linear Lorenz three-variable model system with the goal of a smooth, continuous and accurate data assimilation. The hybrid nudging-EnKF (HNEnKF computes the hybrid nudging coefficients from the flow-dependent, time-varying error covariance matrix from the EnKF's ensemble forecasts. It extends the standard diagonal nudging terms to additional off-diagonal statistical correlation terms for greater inter-variable influence of the innovations in the model's predictive equations to assist in the data assimilation process. The HNEnKF promotes a better fit of an analysis to data compared to that achieved by either nudging or incremental analysis update (IAU. When model error is introduced, it produces similar or better root mean square errors compared to the EnKF while minimising the error spikes/discontinuities created by the intermittent EnKF. It provides a continuous data assimilation with better inter-variable consistency and improved temporal smoothness than that of the EnKF. Data assimilation experiments are also compared to the ensemble Kalman smoother (EnKS. The HNEnKF has similar or better temporal smoothness than that of the EnKS, and with much smaller central processing unit (CPU time and data storage requirements.
基于卡尔曼滤波的倒立摆系统角度信号处理研究%Research on Signal Processing Inverted Pendulum System Based on Kalman Filter
Institute of Scientific and Technical Information of China (English)
周辉权; 孙华; 冀渊; 丁伟
2013-01-01
倒立摆系统姿态状态是一个强耦合的多阶非线性系统。在使用传统的加速度传感器获取数据的基础上，使用卡尔曼滤波的方法，将加速度传感器数据和陀螺仪数据进行融合，以Freescale Cortex_M4内核单片机为核心的惯性测量单元进行试验。卡尔曼滤波器将姿态信息作为系统状态变量进行实时估算滤掉噪声。并且通过实验，观察倒立摆系统实际运行状态，证明了卡尔曼滤波具有良好的动态跟踪能力和抗噪声能力。%Inverted pendulum system is a typical fast, multivariable, nonlinear, unstable system. It uses the Kalman filter, the acceleration sensor data fusion and gyroscope data to the Freescale Cortex_M4 microcontroller core inertial measurement unit tests based on Traditional acceleration sensors to obtain data. Kalman filter attitude information as the system state variables in real-time estimate filter out noise. And by experiment, observation of the actual running state of the inverted pendulum system, the Kalman filter has a good dynamic tracking capa⁃bility and anti-noise ability.
Parallelized unscented Kalman filters for carrier recovery in coherent optical communication.
Jignesh, Jokhakar; Corcoran, Bill; Lowery, Arthur
2016-07-15
We show that unscented Kalman filters can be used to mitigate local oscillator phase noise and to compensate carrier frequency offset in coherent single-carrier optical communication systems. A parallel processing architecture implementing the unscented Kalman filter is proposed, improving upon a previous parallelized linear Kalman filter (LKF) implementation.
Maneuvering Target Tracking Algorithm Based on Adaptive Fading Kalman Filter%基于改进 Singer 模型的机动目标跟踪方法
Institute of Scientific and Technical Information of China (English)
张燕; 柳超; 李云鹏
2015-01-01
Considering the divergence and poor precision due to inaccurate modeling of the system or noise, an a-daptive fading kalman filter based on singer model (AKF - Singer)is proposed. It adopts a fading factor to restrain the memory length of kalman filter. Simulation shows that the proposed algorithm can effectively restrain the diver-gence of filtering, and is more steady and more precise compared to traditional singer model.%Singer 模型使用标准卡尔曼滤波器对机动目标进行跟踪，当系统模型不准确或噪声统计特性不确定时，容易引起滤波发散或跟踪精度下降等问题。针对这种情况，本文提出了一种采用自适应渐消卡尔曼滤波的 Singer 模型算法(AKF Singer)，通过引入渐消因子来抑制滤波器的记忆长度，自适应的调整新息权重和滤波器增益，从而避免发散。仿真结果表明，本文所提算法能够有效抑制滤波发散，相比于传统 Singer 模型，具有更好的跟踪稳定性和更高的跟踪精度。
Selection of noise parameters for Kalman filter
Institute of Scientific and Technical Information of China (English)
Ka-Veng Yuen; Ka-In Hoi; Kai-Meng Mok
2007-01-01
The Bayesian probabilistic approach is proposed to estimate the process noise and measurement noise parameters for a Kalman filter. With state vectors and covariance matrices estimated by the Kalman filter, the likehood of the measurements can be constructed as a function of the process noise and measurement noise parameters. By maximizing the likklihood function with respect to these noise parameters, the optimal values can be obtained. Furthermore, the Bayesian probabilistic approach allows the associated uncertainty to be quantified. Examples using a single-degree-of-freedom system and a ten-story building illustrate the proposed method. The effect on the performance of the Kalman filter due to the selection of the process noise and measurement noise parameters was demonstrated. The optimal values of the noise parameters were found to be close to the actual values in the sense that the actual parameters were in the region with significant probability density. Through these examples, the Bayesian approach was shown to have the capability to provide accurate estimates of the noise parameters of the Kalman filter, and hence for state estimation.
2008-03-01
21]. Table 2.1: Discrete Kalman filter time update equations x−k = Axk−1 + Buk (2.8) P−k = APk −1A T + Q (2.9) a posteriori error covariance [21...K*residual(:,k); Table 2.3: Comparison: Matlabr code and Kalman filter equations x−k = Axk−1 + Buk ⇐⇒ x(:, k) = phi ∗ x(:, k − 1) P−k = APk −1A T
Zhang, Shengzhi; Yu, Shuai; Liu, Chaojun; Yuan, Xuebing; Liu, Sheng
2016-02-20
To provide a long-time reliable orientation, sensor fusion technologies are widely used to integrate available inertial sensors for the low-cost orientation estimation. In this paper, a novel dual-linear Kalman filter was designed for a multi-sensor system integrating MEMS gyros, an accelerometer, and a magnetometer. The proposed filter precludes the impacts of magnetic disturbances on the pitch and roll which the heading is subjected to. The filter can achieve robust orientation estimation for different statistical models of the sensors. The root mean square errors (RMSE) of the estimated attitude angles are reduced by 30.6% under magnetic disturbances. Owing to the reduction of system complexity achieved by smaller matrix operations, the mean total time consumption is reduced by 23.8%. Meanwhile, the separated filter offers greater flexibility for the system configuration, as it is possible to switch on or off the second stage filter to include or exclude the magnetometer compensation for the heading. Online experiments were performed on the homemade miniature orientation determination system (MODS) with the turntable. The average RMSE of estimated orientation are less than 0.4° and 1° during the static and low-dynamic tests, respectively. More realistic tests on two-wheel self-balancing vehicle driving and indoor pedestrian walking were carried out to evaluate the performance of the designed MODS when high accelerations and angular rates were introduced. Test results demonstrate that the MODS is applicable for the orientation estimation under various dynamic conditions. This paper provides a feasible alternative for low-cost orientation determination.
Rochoux, M. C.; Emery, C.; Ricci, S.; Cuenot, B.; Trouve, A.
2015-08-01
This paper is the second part in a series of two articles, which aims at presenting a data-driven modeling strategy for forecasting wildfire spread scenarios based on the assimilation of the observed fire front location and on the sequential correction of model parameters or model state. This model relies on an estimation of the local rate of fire spread (ROS) as a function of environmental conditions based on Rothermel's semi-empirical formulation, in order to propagate the fire front with an Eulerian front-tracking simulator. In Part I, a data assimilation (DA) system based on an ensemble Kalman filter (EnKF) was implemented to provide a spatially uniform correction of biomass fuel and wind parameters and thereby, produce an improved forecast of the wildfire behavior (addressing uncertainties in the input parameters of the ROS model only). In Part II, the objective of the EnKF algorithm is to sequentially update the two-dimensional coordinates of the markers along the discretized fire front, in order to provide a spatially distributed correction of the fire front location and thereby, a more reliable initial condition for further model time-integration (addressing all sources of uncertainties in the ROS model). The resulting prototype data-driven wildfire spread simulator is first evaluated in a series of verification tests using synthetically generated observations; tests include representative cases with spatially varying biomass properties and temporally varying wind conditions. In order to properly account for uncertainties during the EnKF update step and to accurately represent error correlations along the fireline, it is shown that members of the EnKF ensemble must be generated through variations in estimates of the fire's initial location as well as through variations in the parameters of the ROS model. The performance of the prototype simulator based on state estimation (SE) or parameter estimation (PE) is then evaluated by comparison with data taken from
A Novel Robust Interval Kalman Filter Algorithm for GPS/INS Integrated Navigation
Directory of Open Access Journals (Sweden)
Chen Jiang
2016-01-01
Full Text Available Kalman filter is widely applied in data fusion of dynamic systems under the assumption that the system and measurement noises are Gaussian distributed. In literature, the interval Kalman filter was proposed aiming at controlling the influences of the system model uncertainties. The robust Kalman filter has also been proposed to control the effects of outliers. In this paper, a new interval Kalman filter algorithm is proposed by integrating the robust estimation and the interval Kalman filter in which the system noise and the observation noise terms are considered simultaneously. The noise data reduction and the robust estimation methods are both introduced into the proposed interval Kalman filter algorithm. The new algorithm is equal to the standard Kalman filter in terms of computation, but superior for managing with outliers. The advantage of the proposed algorithm is demonstrated experimentally using the integrated navigation of Global Positioning System (GPS and the Inertial Navigation System (INS.
Impact and point prediction using a neural extended Kalman filter with multiple sensors
Stubberud, Stephen C.; Kramer, Kathleen A.
2007-04-01
The neural extended Kalman filter is an adaptive estimation technique that has been shown to learn on-line the maneuver model of the trajectory of a target. This improved motion model can be used to better predict the location of a target at given point in time, especially when the target, such as a mortar shell, has limited maneuvering capabilities. In this paper, the neural extended Kalman filter is used to predict, with multiple-sensor-systems provided measurement reports, impact point and impact time of a ballistic-like projectile when the drag on the shell was not accurately modeled in the motion model. In previous work, the neural extended Kalman filter was shown to work well with a single sensor with a uniform sample rate. Multiple sensors can incorporate two major differences into the problem. The first difference is that of the multiple aspect angles and uncertainty that are used in the model adaptation. The second difference is that of a non-uniform update rate of the measurements to the tracking system. While most tracking systems can easily handle this difference, the adaptation of the neural network training parameters can be deleteriously affected by these variations. The first of these two differences, potential concerns to the neural extended Kalman filter's implementation, is investigated in this effort. In this effort, performance of this adaptive and predictive scheme with multiple sensors in a three dimensional space is shown to provide a quality impact estimate.
The use of the Kalman filter in the automated segmentation of EIT lung images.
Zifan, A; Liatsis, P; Chapman, B E
2013-06-01
In this paper, we present a new pipeline for the fast and accurate segmentation of impedance images of the lungs using electrical impedance tomography (EIT). EIT is an emerging, promising, non-invasive imaging modality that produces real-time, low spatial but high temporal resolution images of impedance inside a body. Recovering impedance itself constitutes a nonlinear ill-posed inverse problem, therefore the problem is usually linearized, which produces impedance-change images, rather than static impedance ones. Such images are highly blurry and fuzzy along object boundaries. We provide a mathematical reasoning behind the high suitability of the Kalman filter when it comes to segmenting and tracking conductivity changes in EIT lung images. Next, we use a two-fold approach to tackle the segmentation problem. First, we construct a global lung shape to restrict the search region of the Kalman filter. Next, we proceed with augmenting the Kalman filter by incorporating an adaptive foreground detection system to provide the boundary contours for the Kalman filter to carry out the tracking of the conductivity changes as the lungs undergo deformation in a respiratory cycle. The proposed method has been validated by using performance statistics such as misclassified area, and false positive rate, and compared to previous approaches. The results show that the proposed automated method can be a fast and reliable segmentation tool for EIT imaging.
State observers and Kalman filtering for high performance vibration isolation systems
Beker, M. G.; Bertolini, A.; van den Brand, J. F. J.; Bulten, H. J.; Hennes, E.; Rabeling, D. S.
2014-03-01
There is a strong scientific case for the study of gravitational waves at or below the lower end of current detection bands. To take advantage of this scientific benefit, future generations of ground based gravitational wave detectors will need to expand the limit of their detection bands towards lower frequencies. Seismic motion presents a major challenge at these frequencies and vibration isolation systems will play a crucial role in achieving the desired low-frequency sensitivity. A compact vibration isolation system designed to isolate in-vacuum optical benches for Advanced Virgo will be introduced and measurements on this system are used to present its performance. All high performance isolation systems employ an active feedback control system to reduce the residual motion of their suspended payloads. The development of novel control schemes is needed to improve the performance beyond what is currently feasible. Here, we present a multi-channel feedback approach that is novel to the field. It utilizes a linear quadratic regulator in combination with a Kalman state observer and is shown to provide effective suppression of residual motion of the suspended payload. The application of state observer based feedback control for vibration isolation will be demonstrated with measurement results from the Advanced Virgo optical bench suspension system.
State observers and Kalman filtering for high performance vibration isolation systems.
Beker, M G; Bertolini, A; van den Brand, J F J; Bulten, H J; Hennes, E; Rabeling, D S
2014-03-01
There is a strong scientific case for the study of gravitational waves at or below the lower end of current detection bands. To take advantage of this scientific benefit, future generations of ground based gravitational wave detectors will need to expand the limit of their detection bands towards lower frequencies. Seismic motion presents a major challenge at these frequencies and vibration isolation systems will play a crucial role in achieving the desired low-frequency sensitivity. A compact vibration isolation system designed to isolate in-vacuum optical benches for Advanced Virgo will be introduced and measurements on this system are used to present its performance. All high performance isolation systems employ an active feedback control system to reduce the residual motion of their suspended payloads. The development of novel control schemes is needed to improve the performance beyond what is currently feasible. Here, we present a multi-channel feedback approach that is novel to the field. It utilizes a linear quadratic regulator in combination with a Kalman state observer and is shown to provide effective suppression of residual motion of the suspended payload. The application of state observer based feedback control for vibration isolation will be demonstrated with measurement results from the Advanced Virgo optical bench suspension system.
Directory of Open Access Journals (Sweden)
Francois Counillon
2014-03-01
Full Text Available Here, we firstly demonstrate the potential of an advanced flow dependent data assimilation method for performing seasonal-to-decadal prediction and secondly, reassess the use of sea surface temperature (SST for initialisation of these forecasts. We use the Norwegian Climate Prediction Model (NorCPM, which is based on the Norwegian Earth System Model (NorESM and uses the deterministic ensemble Kalman filter to assimilate observations. NorESM is a fully coupled system based on the Community Earth System Model version 1, which includes an ocean, an atmosphere, a sea ice and a land model. A numerically efficient coarse resolution version of NorESM is used. We employ a twin experiment methodology to provide an upper estimate of predictability in our model framework (i.e. without considering model bias of NorCPM that assimilates synthetic monthly SST data (EnKF-SST. The accuracy of EnKF-SST is compared to an unconstrained ensemble run (FREE and ensemble predictions made with near perfect (i.e. microscopic SST perturbation initial conditions (PERFECT. We perform 10 cycles, each consisting of a 10-yr assimilation phase, followed by a 10-yr prediction. The results indicate that EnKF-SST improves sea level, ice concentration, 2 m atmospheric temperature, precipitation and 3-D hydrography compared to FREE. Improvements for the hydrography are largest near the surface and are retained for longer periods at depth. Benefits in salinity are retained for longer periods compared to temperature. Near-surface improvements are largest in the tropics, while improvements at intermediate depths are found in regions of large-scale currents, regions of deep convection, and at the Mediterranean Sea outflow. However, the benefits are often small compared to PERFECT, in particular, at depth suggesting that more observations should be assimilated in addition to SST. The EnKF-SST system is also tested for standard ocean circulation indices and demonstrates decadal
Underground mine navigation using an integrated IMU/TOF system with unscented Kalman filter
CSIR Research Space (South Africa)
Hlophe, K
2011-07-01
Full Text Available GPS. Our research interest is focused on using low-cost off-the-shelf IMU to improve the Active Beacon Positioning System (ABPS) developed here at the CSIR. This paper proposes a novel pose estimator, for underground mines, that fuses together data...
Closed and Open Loop Subspace System Identification of the Kalman Filter
Directory of Open Access Journals (Sweden)
David Di Ruscio
2009-04-01
Full Text Available Some methods for consistent closed loop subspace system identification presented in the literature are analyzed and compared to a recently published subspace algorithm for both open as well as for closed loop data, the DSR_e algorithm. Some new variants of this algorithm are presented and discussed. Simulation experiments are included in order to illustrate if the algorithms are variance efficient or not.
Institute of Scientific and Technical Information of China (English)
QI Wen-Juan; ZHANG Peng; DENG Zi-Li
2014-01-01
This paper deals with the problem of designing robust sequential covariance intersection (SCI) fusion Kalman filter for the clustering multi-agent sensor network system with measurement delays and uncertain noise variances. The sensor network is partitioned into clusters by the nearest neighbor rule. Using the minimax robust estimation principle, based on the worst-case conservative sensor network system with conservative upper bounds of noise variances, and applying the unbiased linear minimum variance (ULMV) optimal estimation rule, we present the two-layer SCI fusion robust steady-state Kalman filter which can reduce communication and computation burdens and save energy sources, and guarantee that the actual filtering error variances have a less-conservative upper-bound. A Lyapunov equation method for robustness analysis is proposed, by which the robustness of the local and fused Kalman filters is proved. The concept of the robust accuracy is presented and the robust accuracy relations of the local and fused robust Kalman filters are proved. It is proved that the robust accuracy of the global SCI fuser is higher than those of the local SCI fusers and the robust accuracies of all SCI fusers are higher than that of each local robust Kalman filter. A simulation example for a tracking system verifies the robustness and robust accuracy relations.
基于渐消卡尔曼滤波器的定位系统设计%Design of Localization System Based on Reducing Kalman Filter
Institute of Scientific and Technical Information of China (English)
杨柳庆; 肖前贵; 牛妍; 胡寿松
2012-01-01
针对无人机捷联式惯性导航系统(Strap-down inertial navigation system,SINS)定位精度低、全球卫星定位系统(Global position system,GPS)定位的非自主性,建立了一种无人机SINS/GPS定位信息融合系统.采用渐消Kalman滤波技术,有效防止了SINS/GPS组合导航系统的滤波发散.采用自适应运算法则,从理论上证明了渐消卡尔曼滤波器的稳定性,得到了滤波器稳定要求的新的务件,与以往研究比较,条件更为宽泛.分别进行了SINS/GPS常规卡尔曼滤波仿真和渐消卡尔曼滤波仿真,结果表明:采用渐消卡尔曼滤波技术在工程实践上可以有效提高无人机的导航定位精度,并且易于工程实现.%Aiming at the low precision of navigation and position in strap-down inertial navigation system (SINS) of unmaned aerial vehicle (UAV) and the dependence of global position system (GPS), the SINS/GPS localization information fusion system is designed. The reducing Kalman filter is introduced to prevent SINS from distorting filter. The stability of the reducing Kalman filter is analyzed by a standard adaptive algorithm to obtain new and low requirement conditions for stability. Through derivation and simulation of reducing factor, the filter effect on system of reducing Kalman filter is compared with that of general filter. The simulation results show that reducing Kalman filter can improve the accuracy of navigation localization for UAV and can meet the need of engineering realization.
Design of Kalman filters for mobile robots
DEFF Research Database (Denmark)
Larsen, Thomas Dall; Hansen, Karsten L.; Andersen, Nils Axel
1999-01-01
Kalman filters have for a long time been widely used on mobile robots as a location estimator. Many different Kalman filter designs have been proposed, using models of various complexity. In this paper, two different design methods are evaluated and compared. Focus is put on the common setup where...... the mobile robot is equipped with a dual encoder system supported by some additional absolute measurements. A common filter type for this setup is the odometric filter, where readings from the odometry system on the robot are used together with the geometry of the robot movement as a model of the robot....... If additional kinematic assumptions are made, for instance regarding the velocity of the robot, an augmented model can be used instead. This kinematic filter has some advantages when used intelligently, and it is shown how this type of filter can be used to suppress noise on encoder readings and velocity...
Nonlinear Kalman Filtering for acoustic emission source localization in anisotropic panels.
Dehghan Niri, E; Farhidzadeh, A; Salamone, S
2014-02-01
Nonlinear Kalman Filtering is an established field in applied probability and control systems, which plays an important role in many practical applications from target tracking to weather and climate prediction. However, its application for acoustic emission (AE) source localization has been very limited. In this paper, two well-known nonlinear Kalman Filtering algorithms are presented to estimate the location of AE sources in anisotropic panels: the Extended Kalman Filter (EKF) and Unscented Kalman Filter (UKF). These algorithms are applied to two cases: velocity profile known (CASE I) and velocity profile unknown (CASE II). The algorithms are compared with a more traditional nonlinear least squares method. Experimental tests are carried out on a carbon-fiber reinforced polymer (CFRP) composite panel instrumented with a sparse array of piezoelectric transducers to validate the proposed approaches. AE sources are simulated using an instrumented miniature impulse hammer. In order to evaluate the performance of the algorithms, two metrics are used: (1) accuracy of the AE source localization and (2) computational cost. Furthermore, it is shown that both EKF and UKF can provide a confidence interval of the estimated AE source location and can account for uncertainty in time of flight measurements.
Vehicle Sideslip Angle Estimation Based on Hybrid Kalman Filter
Directory of Open Access Journals (Sweden)
Jing Li
2016-01-01
Full Text Available Vehicle sideslip angle is essential for active safety control systems. This paper presents a new hybrid Kalman filter to estimate vehicle sideslip angle based on the 3-DoF nonlinear vehicle dynamic model combined with Magic Formula tire model. The hybrid Kalman filter is realized by combining square-root cubature Kalman filter (SCKF, which has quick convergence and numerical stability, with square-root cubature based receding horizon Kalman FIR filter (SCRHKF, which has robustness against model uncertainty and temporary noise. Moreover, SCKF and SCRHKF work in parallel, and the estimation outputs of two filters are merged by interacting multiple model (IMM approach. Experimental results show the accuracy and robustness of the hybrid Kalman filter.
Kalman filter data assimilation: targeting observations and parameter estimation.
Bellsky, Thomas; Kostelich, Eric J; Mahalov, Alex
2014-06-01
This paper studies the effect of targeted observations on state and parameter estimates determined with Kalman filter data assimilation (DA) techniques. We first provide an analytical result demonstrating that targeting observations within the Kalman filter for a linear model can significantly reduce state estimation error as opposed to fixed or randomly located observations. We next conduct observing system simulation experiments for a chaotic model of meteorological interest, where we demonstrate that the local ensemble transform Kalman filter (LETKF) with targeted observations based on largest ensemble variance is skillful in providing more accurate state estimates than the LETKF with randomly located observations. Additionally, we find that a hybrid ensemble Kalman filter parameter estimation method accurately updates model parameters within the targeted observation context to further improve state estimation.
Consensus+Innovations Distributed Kalman Filter With Optimized Gains
Das, Subhro; Moura, Jose M. F.
2017-01-01
In this paper, we address the distributed filtering and prediction of time-varying random fields represented by linear time-invariant (LTI) dynamical systems. The field is observed by a sparsely connected network of agents/sensors collaborating among themselves. We develop a Kalman filter type consensus+innovations distributed linear estimator of the dynamic field termed as Consensus+Innovations Kalman Filter. We analyze the convergence properties of this distributed estimator. We prove that the mean-squared error of the estimator asymptotically converges if the degree of instability of the field dynamics is within a pre-specified threshold defined as tracking capacity of the estimator. The tracking capacity is a function of the local observation models and the agent communication network. We design the optimal consensus and innovation gain matrices yielding distributed estimates with minimized mean-squared error. Through numerical evaluations, we show that, the distributed estimator with optimal gains converges faster and with approximately 3dB better mean-squared error performance than previous distributed estimators.
Hierarchical Bayes Ensemble Kalman Filtering
Tsyrulnikov, Michael
2015-01-01
Ensemble Kalman filtering (EnKF), when applied to high-dimensional systems, suffers from an inevitably small affordable ensemble size, which results in poor estimates of the background error covariance matrix ${\\bf B}$. The common remedy is a kind of regularization, usually an ad-hoc spatial covariance localization (tapering) combined with artificial covariance inflation. Instead of using an ad-hoc regularization, we adopt the idea by Myrseth and Omre (2010) and explicitly admit that the ${\\bf B}$ matrix is unknown and random and estimate it along with the state (${\\bf x}$) in an optimal hierarchical Bayes analysis scheme. We separate forecast errors into predictability errors (i.e. forecast errors due to uncertainties in the initial data) and model errors (forecast errors due to imperfections in the forecast model) and include the two respective components ${\\bf P}$ and ${\\bf Q}$ of the ${\\bf B}$ matrix into the extended control vector $({\\bf x},{\\bf P},{\\bf Q})$. Similarly, we break the traditional backgrou...
Directory of Open Access Journals (Sweden)
Xin Li
2016-06-01
Full Text Available The problem of heading drift error using only low cost Micro-Electro-Mechanical (MEMS Inertial-Measurement-Unit (IMU has not been well solved. In this paper, a heading estimation method with real-time compensation based on Kalman filter has been proposed, abbreviated as KHD. For the KHD method, a unified heading error model is established for various predictable errors in magnetic compass for pedestrian navigation, and an effective method for solving the model parameters is proposed in the indoor environment with regular structure. In addition, error model parameters are solved by Kalman filtering algorithm with building geometry information in order to achieve real-time heading compensation. The experimental results show that the KHD method can not only effectively correct the original heading information, but also effectively inhibit the accumulation effect of positioning errors. The performance observed in a field experiment performed on the fourth floor of the School of Environmental Science and Spatial Informatics (SESSI building on the China University of Mining and Technology (CUMT campus confirms that apply KHD method to PDR(Pedestrian Dead Reckoning algorithm can reliably achieve meter-level positioning using a low cost MEMS IMU only.
Kalman Filtering with Inequality Constraints for Turbofan Engine Health Estimation
Simon, Dan; Simon, Donald L.
2003-01-01
Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. This paper develops two analytic methods of incorporating state variable inequality constraints in the Kalman filter. The first method is a general technique of using hard constraints to enforce inequalities on the state variable estimates. The resultant filter is a combination of a standard Kalman filter and a quadratic programming problem. The second method uses soft constraints to estimate state variables that are known to vary slowly with time. (Soft constraints are constraints that are required to be approximately satisfied rather than exactly satisfied.) The incorporation of state variable constraints increases the computational effort of the filter but significantly improves its estimation accuracy. The improvement is proven theoretically and shown via simulation results. The use of the algorithm is demonstrated on a linearized simulation of a turbofan engine to estimate health parameters. The turbofan engine model contains 16 state variables, 12 measurements, and 8 component health parameters. It is shown that the new algorithms provide improved performance in this example over unconstrained Kalman filtering.
Directory of Open Access Journals (Sweden)
Amor Chowdhury
2016-09-01
Full Text Available The presented paper describes accurate distance measurement for a field-sensed magnetic suspension system. The proximity measurement is based on a Hall effect sensor. The proximity sensor is installed directly on the lower surface of the electro-magnet, which means that it is very sensitive to external magnetic influences and disturbances. External disturbances interfere with the information signal and reduce the usability and reliability of the proximity measurements and, consequently, the whole application operation. A sensor fusion algorithm is deployed for the aforementioned reasons. The sensor fusion algorithm is based on the Unscented Kalman Filter, where a nonlinear dynamic model was derived with the Finite Element Modelling approach. The advantage of such modelling is a more accurate dynamic model parameter estimation, especially in the case when the real structure, materials and dimensions of the real-time application are known. The novelty of the paper is the design of a compact electro-magnetic actuator with a built-in low cost proximity sensor for accurate proximity measurement of the magnetic object. The paper successively presents a modelling procedure with the finite element method, design and parameter settings of a sensor fusion algorithm with Unscented Kalman Filter and, finally, the implementation procedure and results of real-time operation.
Chowdhury, Amor; Sarjaš, Andrej
2016-09-15
The presented paper describes accurate distance measurement for a field-sensed magnetic suspension system. The proximity measurement is based on a Hall effect sensor. The proximity sensor is installed directly on the lower surface of the electro-magnet, which means that it is very sensitive to external magnetic influences and disturbances. External disturbances interfere with the information signal and reduce the usability and reliability of the proximity measurements and, consequently, the whole application operation. A sensor fusion algorithm is deployed for the aforementioned reasons. The sensor fusion algorithm is based on the Unscented Kalman Filter, where a nonlinear dynamic model was derived with the Finite Element Modelling approach. The advantage of such modelling is a more accurate dynamic model parameter estimation, especially in the case when the real structure, materials and dimensions of the real-time application are known. The novelty of the paper is the design of a compact electro-magnetic actuator with a built-in low cost proximity sensor for accurate proximity measurement of the magnetic object. The paper successively presents a modelling procedure with the finite element method, design and parameter settings of a sensor fusion algorithm with Unscented Kalman Filter and, finally, the implementation procedure and results of real-time operation.
Indian Academy of Sciences (India)
D Panigrahy; P K Sahu
2015-06-01
Fetal electrocardiogram (ECG) gives information about the health status of fetus and so, an early diagnosis of any cardiac defect before delivery increases the effectiveness of appropriate treatment. In this paper, authors investigate the use of adaptive neuro-fuzzy inference system (ANFIS) with extended Kalman filter for fetal ECG extraction from one ECG signal recorded at the abdominal areas of the mother’s skin. The abdominal ECG is considered to be composite as it contains both mother’s and fetus’ ECG signals. We use extended Kalman filter framework to estimate the maternal component from abdominal ECG. The maternal component in the abdominal ECG signal is a nonlinear transformed version of maternal ECG. ANFIS network has been used to identify this nonlinear relationship, and to align the estimated maternal ECG signal with the maternal component in the abdominal ECG signal. Thus, we extract the fetal ECG component by subtracting the aligned version of the estimated maternal ECG from the abdominal signal. Our results demonstrate the effectiveness of the proposed technique in extracting the fetal ECG component from abdominal signal at different noise levels. The proposed technique is also validated on the extraction of fetal ECG from both actual abdominal recordings and synthetic abdominal recording.
Suboptimal distributed Kalman filtering fusion with feedback
Institute of Scientific and Technical Information of China (English)
Zhao Minhua; Zhu Zhuanmin; Shi Meng; Peng Qinke; Huang Yongxuan
2005-01-01
In order to improve the accuracy of fusion algorithm, feedback is introduced into Kalman filtering fusion. Fusion center broadcasts its latest estimated states to the local sensors, which can improve the performance of local tracking error through reducing the covariance of each local error, and only needs calculating the trace of error variance matrices without calculating the inverse of error variance matrices. Simulation results show that it can reduce the computational complexity and the covariance of error, and it is convenient for engineering applications.
ERP Estimation using a Kalman Filter in VLBI
Karbon, M.; Soja, B.; Nilsson, T.; Heinkelmann, R.; Liu, L.; Lu, C.; Mora-Diaz, J. A.; Raposo-Pulido, V.; Xu, M.; Schuh, H.
2014-12-01
Geodetic Very Long Baseline Interferometry (VLBI) is one of the primary space geodetic techniques, providing the full set of Earth Orientation Parameters (EOP), and it is unique for observing long term Universal Time (UT1). For applications such as satellite-based navigation and positioning, accurate and continuous ERP obtained in near real-time are essential. They also allow the precise tracking of interplanetary spacecraft. One of the goals of VGOS (VLBI Global Observing System) is to provide such near real-time ERP. With the launch of this next generation VLBI system, the International VLBI Service for Geodesy and Astrometry (IVS) increased its efforts not only to reach 1 mm accuracy on a global scale but also to reduce the time span between the collection of VLBI observations and the availability of the final results substantially. Project VLBI-ART contributes to these objectives by implementing an elaborate Kalman filter, which represents a perfect tool for analyzing VLBI data in quasi real-time. The goal is to implement it in the GFZ version of the Vienna VLBI Software (VieVS) as a completely automated tool, i.e., with no need for human interaction. Here we present the methodology and first results of Kalman filtered EOP from VLBI data.
Multi-sensor Data Processing and Fusing Based on Kalman Filtering
Directory of Open Access Journals (Sweden)
Bian Guangrong
2013-01-01
Full Text Available The background of this paper is the warehouse target localization and tracking system which is composed of a number of wireless sensor nodes. Firstly this paper established a model of warehouse target localization and tracking system, then a model of multi-sensor data preprocessing and data fusion was established, and self-adaptive linear recursive method was used to eliminate outliers of the original measured data. Then least squares fitting filter was used to do filtering and denoising for the measured data. In the end, the data which were measured by multi-sensor can be fused by Kalman Filtering algorithm. Data simulation analysis shows that the use of kalman filtering algorithm for the fusion of the data measured by multi-sensor is to obtain more accurate warehouse target location data, so as to increase the positioning and tracking accuracy of the warehouse target localization and tracking system. Key Words:Wireless Sensor Network,Data Fusion,Kalman Filtering
Institute of Scientific and Technical Information of China (English)
孙书利; 马静
2006-01-01
Based on the optimal fusion algorithm weighted by matrices in the linear minimum variance (LMV) sense, a distributed full-order optimal fusion Kalman filter (DFFKF) is given for discrete-time stochastic singular systems with multiple sensors, which involves the inverse of a highdimension matrix to compute matrix weights. To reduce the computational burden, a distributed reduced-order fusion Kalman filter (DRFKF) is presented, which involves in parallel the inverses of two relatively low-dimension matrices to compute matrix weights. A simulation example shows the effectiveness.
Stochastic Optimal Estimation with Fuzzy Random Variables and Fuzzy Kalman Filtering
Institute of Scientific and Technical Information of China (English)
FENG Yu-hu
2005-01-01
By constructing a mean-square performance index in the case of fuzzy random variable, the optimal estimation theorem for unknown fuzzy state using the fuzzy observation data are given. The state and output of linear discrete-time dynamic fuzzy system with Gaussian noise are Gaussian fuzzy random variable sequences. An approach to fuzzy Kalman filtering is discussed. Fuzzy Kalman filtering contains two parts: a real-valued non-random recurrence equation and the standard Kalman filtering.
DEFF Research Database (Denmark)
Sørensen, Jacob Viborg Tornfeldt; Madsen, Henrik; Madsen, H.
2006-01-01
sensitivity study of three well known Kalman filter approaches for the assimilation of water levels in a three dimensional hydrodynamic modelling system. The filters considered are the ensemble Kalman filter (EnKF), the reduced rank square root Kalman filter (RRSQRT) and the steady Kalman filter...... is to be encouraged in this perspective. However, the predicted uncertainty of the assimilation results are sensitive to the parameters and hence must be applied with care. The sensitivity study further demonstrates the effectiveness of the steady Kalman filter in the given system as well as the great impact...
Global point tracking based panoramic image stabilization system
Institute of Scientific and Technical Information of China (English)
朱娟娟; 郭宝龙; 吴宪祥
2009-01-01
A novel image stabilization system is presented,which consists of a global feature point tracking based motion estimation,a Kalman filtering based motion smoothing and an image mosaic based panoramic compensation.The global motion is estimated using feature point matching and iteration with the least-square method.Then,the Kalman filter is applied to smooth the original motion vectors to effectively alleviate unwanted camera vibrations and follow the intentional camera scan.Lastly,the loss information of im...
Mixtures of skewed Kalman filters
Kim, Hyoungmoon
2014-01-01
Normal state-space models are prevalent, but to increase the applicability of the Kalman filter, we propose mixtures of skewed, and extended skewed, Kalman filters. To do so, the closed skew-normal distribution is extended to a scale mixture class of closed skew-normal distributions. Some basic properties are derived and a class of closed skew. t distributions is obtained. Our suggested family of distributions is skewed and has heavy tails too, so it is appropriate for robust analysis. Our proposed special sequential Monte Carlo methods use a random mixture of the closed skew-normal distributions to approximate a target distribution. Hence it is possible to handle skewed and heavy tailed data simultaneously. These methods are illustrated with numerical experiments. © 2013 Elsevier Inc.
Enhancement of Spanish Oesophageal Speech vowels using coherent subband modulator Kalman filtering.
Ishaq, Rizwan; Zapirain, Begoña García
2016-01-01
This paper proposes an Oesophageal Speech (OES) enhancement method, based on Kalman filtering. The Kalman filter is applied to modulators of OES frequency subbands instead of the fullband signal. The OES frequency subbands are decomposed into modulators and carriers components using coherent demodulation. In comparison with fullband Kalman filtering and pole stabilization, the proposed technique shows better results. The system performance is evaluated objectively and subjectively using the Harmonic to Noise Ratio (HNR) and Mean Opinion Score (MOS) respectively. Results have shown that Kalman filter in subband modulators processing is robust and efficient, improving the HNR by 4 to 5 dB for all Spanish vowels.
Simulation of Integrated SINS/GPS Navigation System with Kalman Filtering%SINS/GPS组合导航系统Kalman滤波仿真研究
Institute of Scientific and Technical Information of China (English)
员丽琼; 景占荣
2011-01-01
In order to enhance the accuracy and reliability of the strap-down inertial navigation system (SINS) and global positioning system (GPS), the principles of SINS and GPS are researched. The state equation of SINS/GPS and the measurement equation of the position velocity error are established; and the SINS/GPS integrated navigation is implemented by adopting Kalman filtering algorithm. The Matlab simulation result proves that this integrated navigation realized by Kalman filtering greatly enhances the accuracy. In addition, the integrated navigation system overcomes the disadvantage of SINS, i.e., hard to operate independently in long period; and solves the problems of GPS, i. e. , easily unlock,and poor real-time control performance; thus the high accuracy and reliability and real-time performance of the navigation system are guaranteed.%为提高捷联惯导系统SINS和全球定位系统GPS的精度和可靠性,研究了SINS和GPS的原理,建立了SINS/GPS系统的状态方程和位置速度误差量测方程;并采用卡尔曼滤波算法实现了SINS/GPS的组合导航.Matlab仿真结果证明,采用Kalman滤波实现SINS/GPS组合导航,其精度得到大大提高;且采用SINS/GPS组合导航系统,克服了SINS惯性导航难以长时间独立工作的缺点,解决了GPS易失锁、难以实时控制的不足,保证了导航系统的实时性及较高的精度和可靠性.
Institute of Scientific and Technical Information of China (English)
许光辉; 胡光锐
2005-01-01
A new Kalman filtering algorithm based on estimation of spread spectrum signal before suppression of narrowband interference (NBI) in spread spectrum systems, using the dependence of autoregressive (AR) interference, is presented compared with performance of the ACM nonlinear filtering algorithm, simulation results show that the proposed algorithm has preferable performance, there is about 5 dB SNR improvement in average.
A modified iterative ensemble Kalman filter data assimilation method
Xu, Baoxiong; Bai, Yulong; Wang, Yizhao; Li, Zhe; Ma, Boyang
2017-08-01
High nonlinearity is a typical characteristic associated with data assimilation systems. Additionally, iterative ensemble based methods have attracted a large amount of research attention, which has been focused on dealing with nonlinearity problems. To solve the local convergence problem of the iterative ensemble Kalman filter, a modified iterative ensemble Kalman filter algorithm was put forward, which was based on a global convergence strategy from the perspective of a Gauss-Newton iteration. Through self-adaption, the step factor was adjusted to enable every iteration to approach expected values during the process of the data assimilation. A sensitivity experiment was carried out in a low dimensional Lorenz-63 chaotic system, as well as a Lorenz-96 model. The new method was tested via ensemble size, observation variance, and inflation factor changes, along with other aspects. Meanwhile, comparative research was conducted with both a traditional ensemble Kalman filter and an iterative ensemble Kalman filter. The results showed that the modified iterative ensemble Kalman filter algorithm was a data assimilation method that was able to effectively estimate a strongly nonlinear system state.
Rahimi, Afshin; Kumar, Krishna Dev; Alighanbari, Hekmat
2017-05-01
Reaction wheels, as one of the most commonly used actuators in satellite attitude control systems, are prone to malfunction which could lead to catastrophic failures. Such malfunctions can be detected and addressed in time if proper analytical redundancy algorithms such as parameter estimation and control reconfiguration are employed. Major challenges in parameter estimation include speed and accuracy of the employed algorithm. This paper presents a new approach for improving parameter estimation with adaptive unscented Kalman filter. The enhancement in tracking speed of unscented Kalman filter is achieved by systematically adapting the covariance matrix to the faulty estimates using innovation and residual sequences combined with an adaptive fault annunciation scheme. The proposed approach provides the filter with the advantage of tracking sudden changes in the system non-measurable parameters accurately. Results showed successful detection of reaction wheel malfunctions without requiring a priori knowledge about system performance in the presence of abrupt, transient, intermittent, and incipient faults. Furthermore, the proposed approach resulted in superior filter performance with less mean squared errors for residuals compared to generic and adaptive unscented Kalman filters, and thus, it can be a promising method for the development of fail-safe satellites.
Institute of Scientific and Technical Information of China (English)
熊崴; 庄良杰; 翁海娜; 刘玉峰
2001-01-01
在INS/ESGM/Doppler组合导航系统集中Kalman滤波器的基础上，进一步建立了该组合导航系统的联合Kalman滤波器结构和滤波算法，并讨论了该滤波器的容错性及简化形式。数字仿真的结果表明，本文所设计的联合Kalman滤波器与集中Kalman滤波器相比，其滤波精度基本一致，而滤波器的解算速度更快，容错性能更好。%Based on the centralized Kalman filter of INS/ESGM/Dop perintegrated navigation system,this paper devises the structure and algorithm o f federated Kalman filter of the system,and discusses the performance of fault tolerance and the simplified form of this filter.Compared with centralize d Kalman filter,the results of digital simulation show that the federated Kalman filter designed in this paper has the same precision,more rapid computing speed and better faulttolerant performance.
Kalman Filter Constraint Tuning for Turbofan Engine Health Estimation
Simon, Dan; Simon, Donald L.
2005-01-01
Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints are often neglected because they do not fit easily into the structure of the Kalman filter. Recently published work has shown a new method for incorporating state variable inequality constraints in the Kalman filter, which has been shown to generally improve the filter s estimation accuracy. However, the incorporation of inequality constraints poses some risk to the estimation accuracy as the Kalman filter is theoretically optimal. This paper proposes a way to tune the filter constraints so that the state estimates follow the unconstrained (theoretically optimal) filter when the confidence in the unconstrained filter is high. When confidence in the unconstrained filter is not so high, then we use our heuristic knowledge to constrain the state estimates. The confidence measure is based on the agreement of measurement residuals with their theoretical values. The algorithm is demonstrated on a linearized simulation of a turbofan engine to estimate engine health.
El Gharamti, Mohamad
2012-04-01
Accurate knowledge of the movement of contaminants in porous media is essential to track their trajectory and later extract them from the aquifer. A two-dimensional flow model is implemented and then applied on a linear contaminant transport model in the same porous medium. Because of different sources of uncertainties, this coupled model might not be able to accurately track the contaminant state. Incorporating observations through the process of data assimilation can guide the model toward the true trajectory of the system. The Kalman filter (KF), or its nonlinear invariants, can be used to tackle this problem. To overcome the prohibitive computational cost of the KF, the singular evolutive Kalman filter (SEKF) and the singular fixed Kalman filter (SFKF) are used, which are variants of the KF operating with low-rank covariance matrices. Experimental results suggest that under perfect and imperfect model setups, the low-rank filters can provide estimates as accurate as the full KF but at much lower computational effort. Low-rank filters are demonstrated to significantly reduce the computational effort of the KF to almost 3%. © 2012 American Society of Civil Engineers.
Institute of Scientific and Technical Information of China (English)
文韬; 洪添胜; 李立君; 张南峰; 李震; 郭鑫
2014-01-01
Bactrocera Dorsalis (Hendel) are invasive pests which occur frequently and are seriously harmful to the growth of fruit trees, and they have been ranked an important quarantine object in many countries and regions. The regular manual survey used as the routine predicting method for Bactrocera Dorsalis (Hendel) has not accomplished the requirement of real-time and precise monitoring and warning by means of the adult trapping and monitoring device deployed in orchards. With the development of science and technologies, the method of the automatic machine monitoring for pests has been studied including detection of sound characteristics, radar monitoring and spectral monitoring. Considering the characteristic with randomness, migratory and hiding for Bactrocera Dorsalis (Hendel), there were some problems such as timing, processing and costs in monitoring pests with the aid of combining the above monitoring and the traditional method. In order to accomplish precise monitoring for Bactrocera Dorsalis (Hendel), machine vision technologies were used as an in-field automatic detecting method for the Hendel adults in this paper. Considering the problem with tracking Bactrocera Dorsalis (Hendel) object disappearance in multi-objects with more closer condition by means of the mean shift algorithm in color space according to previous machine vision technology research results, the fusion algorithm based on mean shift and Kalman filter theories for moving objects was proposed for optimizing multi-objects moving trace tracking by means of colorful analysis for moving objects and background in monitoring zones. The recurrence relation of the adults moving trace was obtained, and position coordinate, X-component and Y-component of speed in the 2D plane were extracted by image processing and matching technologies in this algorithm. By analyzing the state sequence linear minimum variance estimate theory of dynamic system and recurrence relation of the adults moving trace, the model
Implementation of Kalman Filter with Python Language
Laaraiedh, Mohamed
2012-01-01
In this paper, we investigate the implementation of a Python code for a Kalman Filter using the Numpy package. A Kalman Filtering is carried out in two steps: Prediction and Update. Each step is investigated and coded as a function with matrix input and output. These different functions are explained and an example of a Kalman Filter application for the localization of mobile in wireless networks is given.
Reduced-Order Kalman Filtering for Processing Relative Measurements
Bayard, David S.
2008-01-01
A study in Kalman-filter theory has led to a method of processing relative measurements to estimate the current state of a physical system, using less computation than has previously been thought necessary. As used here, relative measurements signifies measurements that yield information on the relationship between a later and an earlier state of the system. An important example of relative measurements arises in computer vision: Information on relative motion is extracted by comparing images taken at two different times. Relative measurements do not directly fit into standard Kalman filter theory, in which measurements are restricted to those indicative of only the current state of the system. One approach heretofore followed in utilizing relative measurements in Kalman filtering, denoted state augmentation, involves augmenting the state of the system at the earlier of two time instants and then propagating the state to the later time instant.While state augmentation is conceptually simple, it can also be computationally prohibitive because it doubles the number of states in the Kalman filter. When processing a relative measurement, if one were to follow the state-augmentation approach as practiced heretofore, one would find it necessary to propagate the full augmented state Kalman filter from the earlier time to the later time and then select out the reduced-order components. The main result of the study reported here is proof of a property called reduced-order equivalence (ROE). The main consequence of ROE is that it is not necessary to augment with the full state, but, rather, only the portion of the state that is explicitly used in the partial relative measurement. In other words, it suffices to select the reduced-order components first and then propagate the partial augmented state Kalman filter from the earlier time to the later time; the amount of computation needed to do this can be substantially less than that needed for propagating the full augmented
A Kalman Filtering Perspective for Multiatlas Segmentation.
Gao, Yi; Zhu, Liangjia; Cates, Joshua; MacLeod, Rob S; Bouix, Sylvain; Tannenbaum, Allen
In multiatlas segmentation, one typically registers several atlases to the novel image, and their respective segmented label images are transformed and fused to form the final segmentation. In this work, we provide a new dynamical system perspective for multiatlas segmentation, inspired by the following fact: The transformation that aligns the current atlas to the novel image can be not only computed by direct registration but also inferred from the transformation that aligns the previous atlas to the image together with the transformation between the two atlases. This process is similar to the global positioning system on a vehicle, which gets position by inquiring from the satellite and by employing the previous location and velocity-neither answer in isolation being perfect. To solve this problem, a dynamical system scheme is crucial to combine the two pieces of information; for example, a Kalman filtering scheme is used. Accordingly, in this work, a Kalman multiatlas segmentation is proposed to stabilize the global/affine registration step. The contributions of this work are twofold. First, it provides a new dynamical systematic perspective for standard independent multiatlas registrations, and it is solved by Kalman filtering. Second, with very little extra computation, it can be combined with most existing multiatlas segmentation schemes for better registration/segmentation accuracy.
Estimation of Kalman filter gain from output residuals
Juang, Jer-Nan; Chen, Chung-Wen; Phan, Minh
1993-01-01
This paper presents a procedure to estimate the Kalman filter gain from input-output measurement data with a given system model. The system model can be a finite element model or an experimental model from any identification method. The procedure consists of three basic steps. First, the stochastic portion related to the residuals of the response is computed. Second, the coefficients of a linear difference model for the stochastic portion are estimated by a least-squares solution that minimizes the filter residual. Third, the Kalman filter gain is computed from these model coefficients. Experimental results are presented to illustrate the usefulness of the developed procedure.
Miao, Zhiyong; Shi, Hongyang; Zhang, Yi; Xu, Fan
2017-10-01
In this paper, a new variational Bayesian adaptive cubature Kalman filter (VBACKF) is proposed for nonlinear state estimation. Although the conventional VBACKF performs better than cubature Kalman filtering (CKF) in solving nonlinear systems with time-varying measurement noise, its performance may degrade due to the uncertainty of the system model. To overcome this drawback, a multilayer feed-forward neural network (MFNN) is used to aid the conventional VBACKF, generalizing it to attain higher estimation accuracy and robustness. In the proposed neural-network-aided variational Bayesian adaptive cubature Kalman filter (NN-VBACKF), the MFNN is used to turn the state estimation of the VBACKF adaptively, and it is used for both state estimation and in the online training paradigm simultaneously. To evaluate the performance of the proposed method, it is compared with CKF and VBACKF via target tracking problems. The simulation results demonstrate that the estimation accuracy and robustness of the proposed method are better than those of the CKF and VBACKF.
Institute of Scientific and Technical Information of China (English)
盛峥
2011-01-01
Since the traditional statistical and physical algorithms in the inversion of refractivity from radar clutter （RFC） cannot track omni directions in real time,a new filter algorithm （extended Kalman filter and unscented Kalman filter） is proposed.The parameter equation of atmospheric duct,observation operator,state equation of filter arithmetic are derived separately.Finally,the implementation of the iterative inversion filter algorithm is derived.On the theoretical basis,two algorithms above are tested separately with or without considering the variation of refractivity with time.The experimental result indicates that unscented Kalman filter is suited to solve the nonlinear inversion problem,which has significance in theoretical foundation and technological support for practical applications for the future.%为了改善雷达回波反演大气波导（RFC）方面存在的单时次、单方位角反演的问题,提出利用扩展卡尔曼滤波和不敏卡尔曼滤波的反演算法对大气波导结构的多方位角实时跟踪反演.在卡尔曼滤波方法中分别给出大气波导结构的参数化方程、观测方程、滤波算法的状态转移方程,最后导出滤波反演算法的迭代求解流程.在大气波导结构不随时间变化和随时间变化的两种条件下,对扩展卡尔曼滤波和不敏卡尔曼滤波算法进行数值实验.实验结果表明,不敏卡尔曼滤波更适用于RFC这高度非线性反演问题,它可能今后为大气波导结构多方位角实时跟踪反演的业务化运行提供理论基础与技术保证.
VLBI TRF determination via Kalman filtering
Soja, Benedikt; Karbon, Maria; Nilsson, Tobias; Glaser, Susanne; Balidakis, Kyriakos; Heinkelmann, Robert; Schuh, Harald
2015-04-01
The determination of station positions is one of the primary tasks for space geodetic techniques. Station coordinate offsets are usually determined with respect to a linear coordinate model after removing elastic displacements caused by mass redistributions within the Earth's system. In operational VLBI analysis, the coordinate offsets are estimated in a least-squares adjustment as a constant over the duration of a 24-hour VLBI experiment. Terrestrial reference frames (TRF) are usually derived by adjusting the normal equations that contain the 24-hour constant offsets in order to estimate a linear model, possibly including breaks, for the station positions. We have created a VLBI TRF solution without the assumption of negligible subdaily motion and of linear behavior on longer time scales by applying a Kalman filter. As a preparation for the upcoming VLBI Global Observing System (VGOS), which aims for continuous observations that are available in real-time, a Kalman filter has been implemented into the VLBI software VieVS@GFZ. In addition to the real-time capability, the filter offers the possibility of stochastically modeling the parameters of interest. For station coordinates, changes in a subdaily time frame occur, for instance, from un- or mismodeled geophysical effects. The models for tidal and non-tidal ocean, atmosphere, and hydrology loading are known to have deficiencies and inconsistencies which propagate into the estimated station coordinates. The stochastic model of the Kalman filter can be adapted to take these subdaily effects into account. Comparing the resulting station coordinate time series with daily values from a least squares fit, we have investigated to what extent and in which regions the loading models currently have deficiencies. Due to the high correlation between station height and tropospheric delays, it is possible that errors in one group of parameters are partly absorbed by the other group. To detect problems with correlations and to
Kullback-Leibler Divergence Approach to Partitioned Update Kalman Filter
Raitoharju, Matti; García-Fernández, Ángel F.; Piché, Robert
2016-01-01
Kalman filtering is a widely used framework for Bayesian estimation. The partitioned update Kalman filter applies a Kalman filter update in parts so that the most linear parts of measurements are applied first. In this paper, we generalize partitioned update Kalman filter, which requires the use oft the second order extended Kalman filter, so that it can be used with any Kalman filter extension. To do so, we use a Kullback-Leibler divergence approach to measure the nonlinearity of the measure...
The path prediction of cyclones with Kalman filters
Taskin, Dogan
1990-01-01
Approved for public release; distribution unlimited. The Kalman filter is used to provide estimates of the position and velocity of a storm based upon observation of the storm's longitude and latitude. Nonstationary noise is shown to degrade the performance of the filter and cause tracking divergence. Time varying values for the noise covariance matricies R and Q, and the addition of an external forcing function to the filter, effectively compensated for this tracking error. Results for th...
Institute of Scientific and Technical Information of China (English)
郝钢; 叶秀芬
2011-01-01
For the multiaensor nonlinear systems which have the same measurement function, an adaptive unscented Kalman filter is presented based on the Sage-Husa estimator. This algorithm can estimate the measurement noise variances R（J） of the subsystems by the correlated functions matrix of these educed sequences, and its convergence is also proved. The algorithm avoids the disadvantage of classic Sage-Husa estimator when the Q and R are all unknown. To take full advantage of the information of multisensor systems and improve the filtering accuracy, the adaptive weighted measurement fusion unscented Kalman filter is obtained by using the weighted least squares ( WLS) method. A simulation example for a nonlinear system with 3 sensors shows its effectiveness.%对于带有相同观测方程和未知噪声统计的非线性多传感器系统,提出了一种基于Sage-Husa估计的自适应UKF滤波算法.该算法利用导出的平稳随机序列的相关函数估计系统观测噪声方差统计R(j),并证明了其收敛性.进而利用Sage-Husa估计算法得到自适应UKF滤波算法.该方法避免了传统Sage和Husa的自适应滤波算法不能处理Q和R均未知的系统的局限性.为了将多传感器信息加以充分利用,提高滤波精度,本文利用加权最小二乘法(WLS),实现了多传感器加权观测融合自适应UKF滤波器.一个带3传感器非线性系统的仿真例子说明了该算法的有效性.
Park, Junghun; Hong, Kicheon
2017-06-01
Due to the improvement of the picture quality of closed-circuit television (CCTV), the demand for CCTV has increased rapidly and its market size has also increased. The current system structure of CCTV transfers compressed images without analysis received from CCTV to a control center. The compressed images are suitable for the evidence required for a criminal arrest, but they cannot prevent crime in real time, which has been considered a limitation. Thus, the present paper proposes a system implementation that can prevent crimes by applying a situation awareness system at the back end of the CCTV cameras for image acquisition to prevent crimes efficiently. In the system implemented in the present paper, the region of interest (ROI) is set virtually within the image data when a barrier, such as fence, cannot be installed in actual sites and unauthorized intruders are tracked constantly through data analysis and recognized in the ROI via the developed algorithm. Additionally, a searchlight or alarm sound is activated to prevent crime in real time and the urgent information is transferred to the control center. The system was implemented in the Raspberry Pi 2 board to be run in real time. The experiment results showed that the recognition success rate was 85% or higher and the track accuracy was 90% or higher. By utilizing the system, crime prevention can be achieved by implementing a social safety network.
基于Kalman滤波器的车道保持辅助系统研究%ON LANE-KEEPING-ASSIST SYSTEM BASED ON KALMAN FILTER
Institute of Scientific and Technical Information of China (English)
孙涛; 张志伟
2014-01-01
以非线性车辆动力学模型作为系统被控对象，利用Matlab/Simulink软件设计一种基于Kalman滤波算法的车道保持驾驶辅助系统。运用Kalman算法估计车辆行驶状态信息，并利用“预瞄-跟随”驾驶员模型-车辆模型-控制器所组成的驾驶员模型在回路仿真的方式对所设计系统进行验证。结果显示所设计的车道保持辅助系统能有效提高车辆路径跟踪能力。%We take nonlinear vehicle dynamic model as the controlled object of the system,use Matlab/Simulink software to have designed a lane-keeping-assist system for driving which is based on Kalman filter algorithm.The Kalman algorithm is employed to evaluate the driving state information of the vehicle,and the driver model consisting of pre-targeting-following driver model,vehicle model and controller is utilised to verify the designed system in means of driver-in-the-loop simulation.Result demonstrates that the designed lane-keeping-assistance system can effectively improve the vehicle lane-following capability.
FUZZY OPTIMIZATION USING EXTENDED KALMAN FILTER
Directory of Open Access Journals (Sweden)
M.DIVYA
2013-01-01
Full Text Available Fuzzy Logic is based on the idea that in fuzzy sets each element in the set can assume a value from 0 to 1, not only 0 or 1, as in crisp set theory. The degree of membership function is defined as the gradation in the extent to which an element is belonging to the relevant sets. Optimizing the membership functions of a fuzzy system can be viewed as a system identification problem for nonlinear dynamic system. In this paper two input and one output fuzzy controller is designed for the dynamic process of aircraft. The addition of an EKF in the feedback loop improved the system response by blocking possible effects of measurement error based on Predictor-Corrector algorithm. An Extended Kalman Filter approach to optimize the membership functions of the inputs and outputs of the fuzzy controller. The performance of the fuzzy system before and after the optimization are compared, as well as the membership functions.
Spectral diagonal ensemble Kalman filters
Kasanický, Ivan; Vejmelka, Martin
2015-01-01
A new type of ensemble Kalman filter is developed, which is based on replacing the sample covariance in the analysis step by its diagonal in a spectral basis. It is proved that this technique improves the aproximation of the covariance when the covariance itself is diagonal in the spectral basis, as is the case, e.g., for a second-order stationary random field and the Fourier basis. The method is extended by wavelets to the case when the state variables are random fields, which are not spatially homogeneous. Efficient implementations by the fast Fourier transform (FFT) and discrete wavelet transform (DWT) are presented for several types of observations, including high-dimensional data given on a part of the domain, such as radar and satellite images. Computational experiments confirm that the method performs well on the Lorenz 96 problem and the shallow water equations with very small ensembles and over multiple analysis cycles.
Kalman filtering approach to blind equalization
Kutlu, Mehmet
1993-12-01
Digital communication systems suffer from the channel distortion problem which introduces errors due to intersymbol interference. The solution to this problem is provided by equalizers which use a training sequence to adapt to the channel. However in many cases in which a training sequence is unfeasible, the channel must be adapted blindly. Most of the blind equalization algorithms known so far have problems of convergence to local minima. Our intention is to offer an alternative approach by using extended Kalman filtering and hidden Markov models. They seem to yield more efficient algorithms which take the statistics of the transmitted sequence into consideration. The theoretical development of these new algorithms is discussed in this thesis. Also these algorithms have been simulated under different conditions. The results of simulations and comparisons with existing systems are provided. The models for simulations are presented as MATLAB codes.
Adaptive robust Kalman filtering for precise point positioning
Guo, Fei; Zhang, Xiaohong
2014-10-01
The optimality of precise point postioning (PPP) solution using a Kalman filter is closely connected to the quality of the a priori information about the process noise and the updated mesurement noise, which are sometimes difficult to obtain. Also, the estimation enviroment in the case of dynamic or kinematic applications is not always fixed but is subject to change. To overcome these problems, an adaptive robust Kalman filtering algorithm, the main feature of which introduces an equivalent covariance matrix to resist the unexpected outliers and an adaptive factor to balance the contribution of observational information and predicted information from the system dynamic model, is applied for PPP processing. The basic models of PPP including the observation model, dynamic model and stochastic model are provided first. Then an adaptive robust Kalmam filter is developed for PPP. Compared with the conventional robust estimator, only the observation with largest standardized residual will be operated by the IGG III function in each iteration to avoid reducing the contribution of the normal observations or even filter divergence. Finally, tests carried out in both static and kinematic modes have confirmed that the adaptive robust Kalman filter outperforms the classic Kalman filter by turning either the equivalent variance matrix or the adaptive factor or both of them. This becomes evident when analyzing the positioning errors in flight tests at the turns due to the target maneuvering and unknown process/measurement noises.
Reducing Support Vector Machine Classification Error by Implementing Kalman Filter
Directory of Open Access Journals (Sweden)
Muhsin Hassan
2013-08-01
Full Text Available The aim of this is to demonstrate the capability of Kalman Filter to reduce Support Vector Machine classification errors in classifying pipeline corrosion depth. In pipeline defect classification, it is important to increase the accuracy of the SVM classification so that one can avoid misclassification which can lead to greater problems in monitoring pipeline defect and prediction of pipeline leakage. In this paper, it is found that noisy data can greatly affect the performance of SVM. Hence, Kalman Filter + SVM hybrid technique has been proposed as a solution to reduce SVM classification errors. The datasets has been added with Additive White Gaussian Noise in several stages to study the effect of noise on SVM classification accuracy. Three techniques have been studied in this experiment, namely SVM, hybrid of Discrete Wavelet Transform + SVM and hybrid of Kalman Filter + SVM. Experiment results have been compared to find the most promising techniques among them. MATLAB simulations show Kalman Filter and Support Vector Machine combination in a single system produced higher accuracy compared to the other two techniques.
Ensemble Kalman filtering in presence of inequality constraints
van Leeuwen, P. J.
2009-04-01
Kalman filtering is presence of constraints is an active area of research. Based on the Gaussian assumption for the probability-density functions, it looks hard to bring in extra constraints in the formalism. On the other hand, in geophysical systems we often encounter constraints related to e.g. the underlying physics or chemistry, which are violated by the Gaussian assumption. For instance, concentrations are always non-negative, model layers have non-negative thickness, and sea-ice concentration is between 0 and 1. Several methods to bring inequality constraints into the Kalman-filter formalism have been proposed. One of them is probability density function (pdf) truncation, in which the Gaussian mass from the non-allowed part of the variables is just equally distributed over the pdf where the variables are alolwed, as proposed by Shimada et al. 1998. However, a problem with this method is that the probability that e.g. the sea-ice concentration is zero, is zero! The new method proposed here does not have this drawback. It assumes that the probability-density function is a truncated Gaussian, but the truncated mass is not distributed equally over all allowed values of the variables, but put into a delta distribution at the truncation point. This delta distribution can easily be handled with in Bayes theorem, leading to posterior probability density functions that are also truncated Gaussians with delta distributions at the truncation location. In this way a much better representation of the system is obtained, while still keeping most of the benefits of the Kalman-filter formalism. In the full Kalman filter the formalism is prohibitively expensive in large-scale systems, but efficient implementation is possible in ensemble variants of the kalman filter. Applications to low-dimensional systems and large-scale systems will be discussed.
Detection of Harmonic Occurring using Kalman Filtering
DEFF Research Database (Denmark)
Hussain, Dil Muhammad Akbar; Shoro, Ghulam Mustafa; Imran, Raja Muhammed
2014-01-01
As long as the load to a power system is linear which has been the case before 80's, typically no harmonics are produced. However, the modern power electronic equipment for controlled power consumption produces harmonic disturbances, these devices/equipment possess nonlinear voltage/current chara...... using Kalman filter. This may be very useful for example to quickly switching on certain filters based on the harmonic present. We are using a unique technique to detect the occurrence of harmonics......./current characteristic. These harmonics are not to be allowed to grow beyond a certain limit to avoid any grave consequence to the customer’s main supply. Filters can be implemented at the power source or utility location to eliminate these harmonics. In this paper we detect the instance at which these harmonics occur...
Adaptable Iterative and Recursive Kalman Filter Schemes
Zanetti, Renato
2014-01-01
Nonlinear filters are often very computationally expensive and usually not suitable for real-time applications. Real-time navigation algorithms are typically based on linear estimators, such as the extended Kalman filter (EKF) and, to a much lesser extent, the unscented Kalman filter. The Iterated Kalman filter (IKF) and the Recursive Update Filter (RUF) are two algorithms that reduce the consequences of the linearization assumption of the EKF by performing N updates for each new measurement, where N is the number of recursions, a tuning parameter. This paper introduces an adaptable RUF algorithm to calculate N on the go, a similar technique can be used for the IKF as well.
Inertial Head-Tracker Sensor Fusion by a Complementary Separate-Bias Kalman Filter
Foxlin, Eric
1996-01-01
Current virtual environment and teleoperator applications are hampered by the need for an accurate, quick-responding head-tracking system with a large working volume. Gyroscopic orientation sensors can overcome problems with jitter, latency, interference, line-of-sight obscurations, and limited range, but suffer from slow drift. Gravimetric inclinometers can detect attitude without drifting, but are slow and sensitive to transverse accelerations. This paper describes the design of a Kalman filter to integrate the data from these two types of sensors in order to achieve the excellent dynamic response of an inertial system without drift, and without the acceleration sensitivity of inclinometers.
DEFF Research Database (Denmark)
Jørgensen, John Bagterp; Thomsen, Per Grove; Madsen, Henrik;
2007-01-01
We present a novel numerically robust and computationally efficient extended Kalman filter for state estimation in nonlinear continuous-discrete stochastic systems. The resulting differential equations for the mean-covariance evolution of the nonlinear stochastic continuous-discrete time systems...... are solved efficiently using an ESDIRK integrator with sensitivity analysis capabilities. This ESDIRK integrator for the mean- covariance evolution is implemented as part of an extended Kalman filter and tested on a PDE system. For moderate to large sized systems, the ESDIRK based extended Kalman filter...
1991-12-01
depicts accelerometer and gyro initial thermal transients. The 6 thermal tran- sient states are first order Markov processes in the system and Kalman...1th and filter modIla (22). A one-run Monte Caz!o ai- sis,. a 2-hour flight trajectory of Stacey’s NRS using MSOFE on a 3 MIP VAX worl ’.i,ttiE’n
Xiao, D.; Shi, Y.; Li, L.
2015-12-01
Parameter estimation is generally required for land surface models (LSMs) and hydrologic models to reproduce observed water and energy fluxes in different watersheds. Using soil moisture observations for parameter estimation in addition to discharge and land surface temperature observations can improve the prediction of land surface and subsurface processes. Due to their representativity, point measurements cannot capture the watershed-scale soil moisture conditions and may lead to notable bias in watershed soil moisture predictions if used for model calibration. The intermediate-scale cosmic-ray soil moisture observing system (COSMOS) provides average soil water content measurement over a footprint of 0.34 m2 and depths up to 50 cm, and may provide better calibration data for low-order watersheds. In this study, we will test using COSMOS observations for Flux-PIHM parameter and state estimation via the ensemble Kalman filter (EnKF). Flux-PIHM is a physically-based land surface hydrologic model that couples the Penn State Integrated Hydrologic Model (PIHM) with the Noah land surface model. Synthetic data experiments will be performed at the Shale Hills watershed (area: 0.08 km2, smaller than COSMOS footprint) and the Garner Run watershed (1.34 km2, larger than COSMOS footprint) in the Shale Hills Susquehanna Critical Zone Observatory in central Pennsylvania. COSMOS observations will be assimilated into Flux-PIHM using the EnKF, in addition to discharge and land surface temperature (LST) observations. The accuracy of EnKF estimated parameters and water and energy flux predictions will be evaluated. In addition, the results will be compared with assimilating point soil moisture measurement (in addition to discharge and LST), to assess the effects of using different scales of soil moisture observations for parameter estimation. The results at Shale Hills and Garner Run will be compared to test whether performance of COSMOS data assimilation is affected by the size of
Mizzi, Arthur P.; Arellano, Avelino F., Jr.; Edwards, David P.; Anderson, Jeffrey L.; Pfister, Gabriele G.
2016-03-01
This paper introduces the Weather Research and Forecasting Model with chemistry/Data Assimilation Research Testbed (WRF-Chem/DART) chemical transport forecasting/data assimilation system together with the assimilation of compact phase space retrievals of satellite-derived atmospheric composition products. WRF-Chem is a state-of-the-art chemical transport model. DART is a flexible software environment for researching ensemble data assimilation with different assimilation and forecast model options. DART's primary assimilation tool is the ensemble adjustment Kalman filter. WRF-Chem/DART is applied to the assimilation of Terra/Measurement of Pollution in the Troposphere (MOPITT) carbon monoxide (CO) trace gas retrieval profiles. Those CO observations are first assimilated as quasi-optimal retrievals (QORs). Our results show that assimilation of the CO retrievals (i) reduced WRF-Chem's CO bias in retrieval and state space, and (ii) improved the CO forecast skill by reducing the Root Mean Square Error (RMSE) and increasing the Coefficient of Determination (R2). Those CO forecast improvements were significant at the 95 % level. Trace gas retrieval data sets contain (i) large amounts of data with limited information content per observation, (ii) error covariance cross-correlations, and (iii) contributions from the retrieval prior profile that should be removed before assimilation. Those characteristics present challenges to the assimilation of retrievals. This paper addresses those challenges by introducing the assimilation of compact phase space retrievals (CPSRs). CPSRs are obtained by preprocessing retrieval data sets with an algorithm that (i) compresses the retrieval data, (ii) diagonalizes the error covariance, and (iii) removes the retrieval prior profile contribution. Most modern ensemble assimilation algorithms can efficiently assimilate CPSRs. Our results show that assimilation of MOPITT CO CPSRs reduced the number of observations (and assimilation computation
2011-01-01
Modeling phase is fundamental both in the analysis process of a dynamic system and the design of a control system. If this phase is in-line is even more critical and the only information of the system comes from input/output data. Some adaptation algorithms for fuzzy system based on extended Kalman filter are presented in this paper, which allows obtaining accurate models without renounce the computational efficiency that characterizes the Kalman filter, and allows ...
Particle Kalman Filtering: A Nonlinear Bayesian Framework for Ensemble Kalman Filters
Hoteit, Ibrahim; Pham, Dinh-Tuan
2011-01-01
This paper investigates an approximation scheme of the optimal nonlinear Bayesian filter based on the Gaussian mixture representation of the state probability distribution function. The resulting filter is similar to the particle filter, but is different from it in that, the standard weight-type correction in the particle filter is complemented by the Kalman-type correction with the associated covariance matrices in the Gaussian mixture. We show that this filter is an algorithm in between the Kalman filter and the particle filter, and therefore is referred to as the particle Kalman filter (PKF). In the PKF, the solution of a nonlinear filtering problem is expressed as the weighted average of an "ensemble of Kalman filters" operating in parallel. Running an ensemble of Kalman filters is, however, computationally prohibitive for realistic atmospheric and oceanic data assimilation problems. For this reason, we consider the construction of the PKF through an "ensemble" of ensemble Kalman filters (EnKFs) instead, ...
Borodachev, S. M.
2016-06-01
The simple derivation of recursive least squares (RLS) method equations is given as special case of Kalman filter estimation of a constant system state under changing observation conditions. A numerical example illustrates application of RLS to multicollinearity problem.
Adaptive high-gain extended kalman filter and applications
Boizot, Nicolas Richard
2010-01-01
The work concerns the ``observability problem” --- the reconstruction of a dynamic process's full state from a partially measured state--- for nonlinear dynamic systems. The Extended Kalman Filter (EKF) is a widely-used observer for such nonlinear systems. However it suffers from a lack of theoretical justifications and displays poor performance when the estimated state is far from the real state, e.g. due to large perturbations, a poor initial state estimate, etc… We propose a solution to...
Adaptive Kalman Filter of Transfer Alignment with Un-modeled Wing Flexure of Aircraft
Institute of Scientific and Technical Information of China (English)
无
2008-01-01
The alignment accuracy of the strap-down inertial navigation system (SINS) of airborne weapon is greatly degraded by the dynamic wing flexure of the aircraft. An adaptive Kalman filter uses innovation sequences based on the maximum likelihood estimated criterion to adapt the system noise covariance matrix and the measurement noise covariance matrix on line, which is used to estimate the misalignment if the model of wing flexure of the aircraft is unknown. From a number of simulations, it is shown that the accuracy of the adaptive Kalman filter is better than the conventional Kalman filter, and the erroneous misalignment models of the wing flexure of aircraft will cause bad estimation results of Kalman filter using attitude match method.
Kelly, D. A.; Fermelia, A.; Lee, G. K. F.
1990-01-01
An adaptive Kalman filter design that utilizes recursive maximum likelihood parameter identification is discussed. At the center of this design is the Kalman filter itself, which has the responsibility for attitude determination. At the same time, the identification algorithm is continually identifying the system parameters. The approach is applicable to nonlinear, as well as linear systems. This adaptive Kalman filter design has much potential for real time implementation, especially considering the fast clock speeds, cache memory and internal RAM available today. The recursive maximum likelihood algorithm is discussed in detail, with special attention directed towards its unique matrix formulation. The procedure for using the algorithm is described along with comments on how this algorithm interacts with the Kalman filter.
DEFF Research Database (Denmark)
Hassan, Saima; Ahmadieh Khanesar, Mojtaba; Hajizadeh, Amin
2017-01-01
Learning of fuzzy parameters for system modeling using evolutionary algorithms is an interesting topic. In this paper, two optimal design and tuning of Interval type-2 fuzzy logic system are proposed using hybrid learning algorithms. The consequent parameters of the interval type-2 fuzzy logic....../D) in the second hybrid algorithm. Root mean square error and maximum absolute error as the two accuracy objective are utilized to find the Pareto-optimal solution with the MOPSO and MOEA/D respectively. The proposed hybrid multi-objective designs of the interval type-2 fuzzy logic system are utilized...
Dual extended Kalman filtering in recurrent neural networks(1).
Leung, Chi-Sing; Chan, Lai-Wan
2003-03-01
In the classical deterministic Elman model, the estimation of parameters must be very accurate. Otherwise, the system performance is very poor. To improve the system performance, we can use a Kalman filtering algorithm to guide the operation of a trained recurrent neural network (RNN). In this case, during training, we need to estimate the state of hidden layer, as well as the weights of the RNN. This paper discusses how to use the dual extended Kalman filtering (DEKF) for this dual estimation and how to use our proposing DEKF for removing some unimportant weights from a trained RNN. In our approach, one Kalman algorithm is used for estimating the state of the hidden layer, and one recursive least square (RLS) algorithm is used for estimating the weights. After training, we use the error covariance matrix of the RLS algorithm to remove unimportant weights. Simulation showed that our approach is an effective joint-learning-pruning method for RNNs under the online operation.
On Ensemble Nonlinear Kalman Filtering with Symmetric Analysis Ensembles
Luo, Xiaodong
2010-09-19
The ensemble square root filter (EnSRF) [1, 2, 3, 4] is a popular method for data assimilation in high dimensional systems (e.g., geophysics models). Essentially the EnSRF is a Monte Carlo implementation of the conventional Kalman filter (KF) [5, 6]. It is mainly different from the KF at the prediction steps, where it is some ensembles, rather then the means and covariance matrices, of the system state that are propagated forward. In doing this, the EnSRF is computationally more efficient than the KF, since propagating a covariance matrix forward in high dimensional systems is prohibitively expensive. In addition, the EnSRF is also very convenient in implementation. By propagating the ensembles of the system state, the EnSRF can be directly applied to nonlinear systems without any change in comparison to the assimilation procedures in linear systems. However, by adopting the Monte Carlo method, the EnSRF also incurs certain sampling errors. One way to alleviate this problem is to introduce certain symmetry to the ensembles, which can reduce the sampling errors and spurious modes in evaluation of the means and covariances of the ensembles [7]. In this contribution, we present two methods to produce symmetric ensembles. One is based on the unscented transform [8, 9], which leads to the unscented Kalman filter (UKF) [8, 9] and its variant, the ensemble unscented Kalman filter (EnUKF) [7]. The other is based on Stirling’s interpolation formula (SIF), which results in the divided difference filter (DDF) [10]. Here we propose a simplified divided difference filter (sDDF) in the context of ensemble filtering. The similarity and difference between the sDDF and the EnUKF will be discussed. Numerical experiments will also be conducted to investigate the performance of the sDDF and the EnUKF, and compare them to a well‐established EnSRF, the ensemble transform Kalman filter (ETKF) [2].
Filtering Meteoroid Flights Using Multiple Unscented Kalman Filters
Sansom, E. K.; Bland, P. A.; Rutten, M. G.; Paxman, J.; Towner, M. C.
2016-11-01
Estimator algorithms are immensely versatile and powerful tools that can be applied to any problem where a dynamic system can be modeled by a set of equations and where observations are available. A well designed estimator enables system states to be optimally predicted and errors to be rigorously quantified. Unscented Kalman filters (UKFs) and interactive multiple models can be found in methods from satellite tracking to self-driving cars. The luminous trajectory of the Bunburra Rockhole fireball was observed by the Desert Fireball Network in mid-2007. The recorded data set is used in this paper to examine the application of these two techniques as a viable approach to characterizing fireball dynamics. The nonlinear, single-body system of equations, used to model meteoroid entry through the atmosphere, is challenged by gross fragmentation events that may occur. The incorporation of the UKF within an interactive multiple model smoother provides a likely solution for when fragmentation events may occur as well as providing a statistical analysis of the state uncertainties. In addition to these benefits, another advantage of this approach is its automatability for use within an image processing pipeline to facilitate large fireball data analyses and meteorite recoveries.
Institute of Scientific and Technical Information of China (English)
常国宾; 柳明
2015-01-01
In inertial navigation system (INS) and global positioning system (GPS) integrated system, GPS antennas are usually not located at the same location as the inertial measurement unit (IMU) of the INS, so the lever arm effect exists, which makes the observation equation highly nonlinear. The INS/GPS integration with constant lever arm effect is studied. The position relation of IMU and GPS’s antenna is represented in the earth centered earth fixed frame, while the velocity relation of these two systems is represented in local horizontal frame. Due to the small integration time interval of INS, i.e. 0.1 s in this work, the nonlinearity in the INS error equation is trivial, so the linear INS error model is constructed and addressed by Kalman filter’s prediction step. On the other hand, the high nonlinearity in the observation equation due to lever arm effect is addressed by unscented Kalman filter’s update step to attain higher accuracy and better applicability. Simulation is designed and the performance of the hybrid filter is validated.
Hypersonic entry vehicle state estimation using nonlinearity-based adaptive cubature Kalman filters
Sun, Tao; Xin, Ming
2017-05-01
Guidance, navigation, and control of a hypersonic vehicle landing on the Mars rely on precise state feedback information, which is obtained from state estimation. The high uncertainty and nonlinearity of the entry dynamics make the estimation a very challenging problem. In this paper, a new adaptive cubature Kalman filter is proposed for state trajectory estimation of a hypersonic entry vehicle. This new adaptive estimation strategy is based on the measure of nonlinearity of the stochastic system. According to the severity of nonlinearity along the trajectory, the high degree cubature rule or the conventional third degree cubature rule is adaptively used in the cubature Kalman filter. This strategy has the benefit of attaining higher estimation accuracy only when necessary without causing excessive computation load. The simulation results demonstrate that the proposed adaptive filter exhibits better performance than the conventional third-degree cubature Kalman filter while maintaining the same performance as the uniform high degree cubature Kalman filter but with lower computation complexity.
Multiple Fading Factors Kalman Filter for SINS Static Alignment Application
Institute of Scientific and Technical Information of China (English)
GAO Weixi; MIAO Lingjuan; NI Maolin
2011-01-01
To solve the problem that the standard Kalman filter cannot give the optimal solution when the system model and stochastic information are unknown accurately,single fading factor Kalman filter is suitable for simple systems.But for complex systems with multi-variable,it may not be sufficient to use single fading factor as a multiplier for the covariance matrices.In this paper,a new multiple fading factors Kalman filtering algorithm is presented.By calculating the unbiased estimate of the innovation sequence covariance using fenestration,the fading factor matrix is obtained.Adjusting the covariance matrix of prediction error Pk|k-1 using fading factor matrix,the algorithm provides different rates of fading for different filter channels.The proposed algorithm is applied to strapdown inertial navigation system(SINS) initial alignment,and simulation and experimental results demonstrate that,the alignment accuracy can be upgraded dramatically when the actual system noise characteristics are different from the pre-set values.The new algorithm is less sensitive to uncertainty noise and has better estimation effect of the parameters.Therefore,it is of significant value in practical applications.
Multiplicative Quaternion Extended Kalman Filtering for Nonspinning Guided Projectiles
2013-07-01
micro- electromechanical system ( MEMS ) gyroscopes have been able to measure the spin-rates of fin- stabilized projectiles such as mortars, which...model, the statistics of the gyroscope and accelerometer noise are measureable, and can be easily incorporated into an extended Kalman filtering...tradeoff between affordability, durability, and performance. Automotive-grade MEMS components have been used in the harsh gun-launch environment for
基于CMAC神经网络和Kalman滤波器的三维视觉跟踪%3-D visual tracking based on CMAC neural network and Kalman filter
Institute of Scientific and Technical Information of China (English)
王化明; 罗翔; 朱剑英
2003-01-01
In this paper, the Kalman filter is used to predict image feature position aroun dwhich an image-processing window is then established to diminish feature-sea rching area and to heighten the image-processing speed. According to the fundam entals of image-based visual servoing (IBVS), the cerebellar model articulation controller (CMAC) neural network is inserted into the visual servo control loop to implement the nonlinear mapping from the error signal in the image space to the control signal in the input space instead of the iterative adjustment and co mplicated inverse solution of the image Jacobian. Simulation results show that the feature point can be predicted efficiently using the Kalman filter and on-line supervised learning can be realized using CMAC neural network; end-effector can track the target object very well.%采用Kalman滤波器来预测图像特征点的位置,然后在其周围建立图像处理窗口,以达到减小特征点搜索区域及提高图像处理速度的目的.根据基于图像的视觉伺服IBVS (image based visual servoing) 的原理,在视觉伺服控制环中加入CMAC (cerebellar model articulation controller) 神经网络来实现从图像空间的误差信号向输入空间的控制信号的非线性映射,从而避免了图像雅可比矩阵的不断调整及其复杂的求逆过程.模拟结果表明:采用Kalman滤波器能有效预测特征点的位置,同时采用CMAC神经网络能实现在线有导师学习,末端执行器能较好地对目标物体进行跟踪.
2007-03-01
1-22 systems theory to functional differential equations, as reported in [103]. Addition- ally, the semigroup theory has been steadily developed to...distributor operator, F(t), generates a semigroup of two-parameter state transition operators, Φ(t, s), a time-invariant state distribu- tor operator, F...generates a semigroup of one-parameter state transition operators, Φ(t − s) [38, 160, 39, 48, 115]. The single parameter is denoted by the “time” dif
Deconvolution Kalman filtering for force measurements of revolving wings
Vester, R.; Percin, M.; van Oudheusden, B.
2016-09-01
The applicability of a deconvolution Kalman filtering approach is assessed for the force measurements on a flat plate undergoing a revolving motion, as an alternative procedure to correct for test setup vibrations. The system identification process required for the correct implementation of the deconvolution Kalman filter is explained in detail. It is found that in the presence of a relatively complex forcing history, the DK filter is better suited to filter out structural test rig vibrations than conventional filtering techniques that are based on, for example, low-pass or moving-average filtering. The improvement is especially found in the characterization of the generated force peaks. Consequently, more reliable force data is obtained, which is vital to validate semi-empirical estimation models, but is also relevant to correlate identified flow phenomena to the force production.
Nonlinear Kalman filtering in the presence of additive noise
Kraszewski, Tomasz; Czopik, Grzegorz
2017-04-01
Each modern navigation or localization system designed for ground, water or air objects should provide information on the estimated parameters continuously and as accurately as possible. The implementation of such a process requires the application to operate on non-linear transformations. The defined expectations necessitate the use of nonlinear filtering elements with particular emphasis on the extended Kalman filter. The article presents the simulation research elements of this filter type in the aspect of the possibility of its practical implementation. In the initial phase of the study the conclusion was based on nonlinear one-dimensional model. The possibility of improving the precision of the output through the use of unscented Kalman filters was also analyzed.
Observation Quality Control with a Robust Ensemble Kalman Filter
Roh, Soojin
2013-12-01
Current ensemble-based Kalman filter (EnKF) algorithms are not robust to gross observation errors caused by technical or human errors during the data collection process. In this paper, the authors consider two types of gross observational errors, additive statistical outliers and innovation outliers, and introduce a method to make EnKF robust to gross observation errors. Using both a one-dimensional linear system of dynamics and a 40-variable Lorenz model, the performance of the proposed robust ensemble Kalman filter (REnKF) was tested and it was found that the new approach greatly improves the performance of the filter in the presence of gross observation errors and leads to only a modest loss of accuracy with clean, outlier-free, observations.
Kalman filtering techniques for reducing variance of digital speckle displacement measurement noise
Institute of Scientific and Technical Information of China (English)
Donghui Li; Li Guo
2006-01-01
@@ Target dynamics are assumed to be known in measuring digital speckle displacement. Use is made of a simple measurement equation, where measurement noise represents the effect of disturbances introduced in measurement process. From these assumptions, Kalman filter can be designed to reduce variance of measurement noise. An optical and analysis system was set up, by which object motion with constant displacement and constant velocity is experimented with to verify validity of Kalman filtering techniques for reduction of measurement noise variance.
Distributed Kalman Filter via Gaussian Belief Propagation
Bickson, Danny; Dolev, Danny
2008-01-01
Recent result shows how to compute distributively and efficiently the linear MMSE for the multiuser detection problem, using the Gaussian BP algorithm. In the current work, we extend this construction, and show that operating this algorithm twice on the matching inputs, has several interesting interpretations. First, we show equivalence to computing one iteration of the Kalman filter. Second, we show that the Kalman filter is a special case of the Gaussian information bottleneck algorithm, when the weight parameter $\\beta = 1$. Third, we discuss the relation to the Affine-scaling interior-point method and show it is a special case of Kalman filter. Besides of the theoretical interest of this linking estimation, compression/clustering and optimization, we allow a single distributed implementation of those algorithms, which is a highly practical and important task in sensor and mobile ad-hoc networks. Application to numerous problem domains includes collaborative signal processing and distributed allocation of ...
Software alignment of the BESⅢ main drift chamber using the Kalman Filter method
Institute of Scientific and Technical Information of China (English)
WANG Ji-Ke; MAO Ze-Pu; BIAN Jian-Ming; CAO Guo-Fu; CAO Xue-Xiang; CHEN Shen-Jian; DENG Zi-Yan; FU Cheng-Dong; GAO Yuan-Ning; HE Kang-Lin; HE Miao; HUA Chun-Fei; HUANG Bin; HUANG Xing-Tao; JI Xiao-Bin; LI Fei; LI Hai-Bo; LI Wei-Dong; LIANG Yu-Tie; LIU Chun-Xiu; LIU Huai-Min; LIU Suo; LIU Ying-Jie; MA Qiu-Mei; MA Xiang; MAO Ya-Jun; MO Xiao-Hu; PAN Ming-Hua; PANG Cai-Ying; PING Rong-Gang; QIN Ya-Hong; QIU Jin-Fa; SUN Sheng-Sen; SUN Yong-Zhao; WANG Liang-Liang; WEN Shuo-Pin; WU Ling-Hui; XIE Yu-Guang; XU Min; YAN Liang; YOU Zheng-Yun; YUAN Chang-Zheng; YUAN Ye; ZHANG Bing-Yun; ZHANG Chang-Chun; ZHANG Jian-Yong; ZHANG Xue-Yao; ZHANG Yao; ZHENG Yang-Heng; ZHU Ke-Jun; ZHU Yong-Sheng; ZHU Zhi-Li; ZOU Jia-Heng
2009-01-01
Software alignment is quite important for a tracking detector to reach its ultimate position accuracy and momentum resolution. We developed a new alignment algorithm for the BESⅢ Main Drift Chamber using the Kalman Filter method. Two different types of data which are helix tracks and straight tracks are used to test this algorithm, and the results show that the design and implementation is successful.
Dai, Haifeng; Zhu, Letao; Zhu, Jiangong; Wei, Xuezhe; Sun, Zechang
2015-10-01
The accurate monitoring of battery cell temperature is indispensible to the design of battery thermal management system. To obtain the internal temperature of a battery cell online, an adaptive temperature estimation method based on Kalman filtering and an equivalent time-variant electrical network thermal (EENT) model is proposed. The EENT model uses electrical components to simulate the battery thermodynamics, and the model parameters are obtained with a least square algorithm. With a discrete state-space description of the EENT model, a Kalman filtering (KF) based internal temperature estimator is developed. Moreover, considering the possible time-varying external heat exchange coefficient, a joint Kalman filtering (JKF) based estimator is designed to simultaneously estimate the internal temperature and the external thermal resistance. Several experiments using the hard-cased LiFePO4 cells with embedded temperature sensors have been conducted to validate the proposed method. Validation results show that, the EENT model expresses the battery thermodynamics well, the KF based temperature estimator tracks the real central temperature accurately even with a poor initialization, and the JKF based estimator can simultaneously estimate both central temperature and external thermal resistance precisely. The maximum estimation errors of the KF- and JKF-based estimators are less than 1.8 °C and 1 °C respectively.
Kalman Filter Residual Expert System.
1987-12-01
s letv We ii 01111), iatioiis of uIM%-;ttuiil sen’sos t Ihat Imss th1)rouigh I\\uunu ’It I. I. I 1.- [I( project, known ais the Adaptive Tactical...ional dat a. The norma llv hi hilviite ( PS tipd atv pl)Vldl’ "I’i II i tia11 t lon. 0( )ii %\\ 11 .11 Is S(111* lie lt 1i11’tl he ree e~i’V I i * j I
Restricted Kalman Filtering Theory, Methods, and Application
Pizzinga, Adrian
2012-01-01
In statistics, the Kalman filter is a mathematical method whose purpose is to use a series of measurements observed over time, containing random variations and other inaccuracies, and produce estimates that tend to be closer to the true unknown values than those that would be based on a single measurement alone. This Brief offers developments on Kalman filtering subject to general linear constraints. There are essentially three types of contributions: new proofs for results already established; new results within the subject; and applications in investment analysis and macroeconomics, where th
Kalman filter estimation model in flood forecasting
Husain, Tahir
Elementary precipitation and runoff estimation problems associated with hydrologic data collection networks are formulated in conjunction with the Kalman Filter Estimation Model. Examples involve the estimation of runoff using data from a single precipitation station and also from a number of precipitation stations. The formulations demonstrate the role of state-space, measurement, and estimation equations of the Kalman Filter Model in flood forecasting. To facilitate the formulation, the unit hydrograph concept and antecedent precipitation index is adopted in the estimation model. The methodology is then applied to estimate various flood events in the Carnation Creek of British Columbia.
Jesussek, Mathias; Ellermann, Katrin
2014-12-01
Reliability and dependability in complex mechanical systems can be improved by fault detection and isolation (FDI) methods. These techniques are key elements for maintenance on demand, which could decrease service cost and time significantly. This paper addresses FDI for a railway vehicle: the mechanical model is described as a multibody system, which is excited randomly due to track irregularities. Various parameters, like masses, spring- and damper-characteristics, influence the dynamics of the vehicle. Often, the exact values of the parameters are unknown and might even change over time. Some of these changes are considered critical with respect to the operation of the system and they require immediate maintenance. The aim of this work is to detect faults in the suspension system of the vehicle. A Kalman filter is used in order to estimate the states. To detect and isolate faults the detection error is minimised with multiple Kalman filters. A full-scale train model with nonlinear wheel/rail contact serves as an example for the described techniques. Numerical results for different test cases are presented. The analysis shows that for the given system it is possible not only to detect a failure of the suspension system from the system's dynamic response, but also to distinguish clearly between different possible causes for the changes in the dynamical behaviour.
Electronic image stabilization system based on global feature tracking
Institute of Scientific and Technical Information of China (English)
Zhu Juanjuan; Guo Baolong
2008-01-01
A new robust electronic image stabilization system is presented, which involves feature-point, tracking based global motion estimation and Kalman filtering based motion compensation. First, global motion is estimated from the local motions of selected feature points. Considering the local moving objects or the inevitable mismatch,the matching validation, based on the stable relative distance between the points set is proposed, thus maintaining high accuracy and robustness. Next, the global motion parameters are accumulated for correction by Kalman filter-ation. The experimental result illustrates that the proposed system is effective to stabilize translational, rotational,and zooming jitter and robust to local motions.
Hybrid Kalman Filter: A New Approach for Aircraft Engine In-Flight Diagnostics
Kobayashi, Takahisa; Simon, Donald L.
2006-01-01
In this paper, a uniquely structured Kalman filter is developed for its application to in-flight diagnostics of aircraft gas turbine engines. The Kalman filter is a hybrid of a nonlinear on-board engine model (OBEM) and piecewise linear models. The utilization of the nonlinear OBEM allows the reference health baseline of the in-flight diagnostic system to be updated to the degraded health condition of the engines through a relatively simple process. Through this health baseline update, the effectiveness of the in-flight diagnostic algorithm can be maintained as the health of the engine degrades over time. Another significant aspect of the hybrid Kalman filter methodology is its capability to take advantage of conventional linear and nonlinear Kalman filter approaches. Based on the hybrid Kalman filter, an in-flight fault detection system is developed, and its diagnostic capability is evaluated in a simulation environment. Through the evaluation, the suitability of the hybrid Kalman filter technique for aircraft engine in-flight diagnostics is demonstrated.
Directory of Open Access Journals (Sweden)
Erna Apriliani
2011-01-01
Full Text Available Kalman filter is an algorithm to estimate the state variable of dynamical stochastic system. The square root ensemble Kalman filter is an modification of Kalman filter. The square root ensemble Kalman filter is proposed to keep the computational stability and reduce the computational time. In this paper we study the efficiency of the reduced rank ensemble Kalman filter. We apply this algorithm to the non isothermal continue stirred tank reactor problem. We decompose the covariance of the ensemble estimation by using the singular value decomposition (the SVD, and then we reduced the rank of the diagonal matrix of those singular values. We make a simulation by using Matlab program. We took some the number of ensemble such as 100, 200 and 500. We compared the computational time and the accuracy between the square root ensemble Kalman filter and the ensemble Kalman filter. The reduced rank ensemble Kalman filter can’t be applied in this problem because the dimension of state variable is too less.
DEFF Research Database (Denmark)
Sørensen, Jacob Viborg Tornfeldt; Madsen, Henrik; Madsen, H.
2006-01-01
sensitivity study of three well known Kalman filter approaches for the assimilation of water levels in a three dimensional hydrodynamic modelling system. The filters considered are the ensemble Kalman filter (EnKF), the reduced rank square root Kalman filter (RRSQRT) and the steady Kalman filter....... A sensitivity analysis of key parameters in the schemes is undertaken for a setup in an idealised bay. The sensitivity of the resulting root mean square error (RMSE) is shown to be low to moderate. Hence the schemes are robust within an acceptable range and their application even with misspecified parameters...... is to be encouraged in this perspective. However, the predicted uncertainty of the assimilation results are sensitive to the parameters and hence must be applied with care. The sensitivity study further demonstrates the effectiveness of the steady Kalman filter in the given system as well as the great impact...
Streamflow Data Assimilation in SWAT Model Using Extended Kalman Filter
Sun, L.; Nistor, I.; Seidou, O.
2014-12-01
Although Extended Kalman Filter (EKF) is regarded as the de facto method for the application of Kalman Filter in non-linear system, it's application to complex distributed hydrological models faces a lot of challenges. Ensemble Kalman Filter (EnKF) is often preferred because it avoids the calculation of the linearization Jacobian Matrix and the propagation of estimation error covariance. EnKF is however difficult to apply to large models because of the huge computation demand needed for parallel propagation of ensemble members. This paper deals with the application of EKF in stream flow prediction using the SWAT model in the watershed of Senegal River, West Africa. In the Jacobian Matrix calculation, SWAT is regarded as a black box model and the derivatives are calculated in the form of differential equations. The state vector is the combination of runoff, soil, shallow aquifer and deep aquifer water contents. As an initial attempt, only stream flow observations are assimilated. Despite the fact that EKF is a sub-optimal filter, the coupling of EKF significantly improves the estimation of daily streamflow. The results of SWAT+EKF are also compared to those of a simpler quasi linear streamflow prediction model where both state and parameters are updated with the EKF.
Constrained Kalman Filtering Via Density Function Truncation for Turbofan Engine Health Estimation
Simon, Dan; Simon, Donald L.
2006-01-01
Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. This paper develops an analytic method of incorporating state variable inequality constraints in the Kalman filter. The resultant filter truncates the PDF (probability density function) of the Kalman filter estimate at the known constraints and then computes the constrained filter estimate as the mean of the truncated PDF. The incorporation of state variable constraints increases the computational effort of the filter but significantly improves its estimation accuracy. The improvement is demonstrated via simulation results obtained from a turbofan engine model. The turbofan engine model contains 3 state variables, 11 measurements, and 10 component health parameters. It is also shown that the truncated Kalman filter may be a more accurate way of incorporating inequality constraints than other constrained filters (e.g., the projection approach to constrained filtering).
A Tool for Kalman Filter Tuning
DEFF Research Database (Denmark)
Åkesson, Bernt Magnus; Jørgensen, John Bagterp; Poulsen, Niels Kjølstad
2007-01-01
The Kalman filter requires knowledge about the noise statistics. In practical applications, however, the noise covariances are generally not known. A method for estimating noise covariances from process data has been investigated. The method gives a least-squares estimate of the noise covariances...
Towards self-organizing Kalman filters
Sijs, J.; Papp, Z.
2012-01-01
Distributed Kalman filtering is an important signal processing method for state estimation in large-scale sensor networks. However, existing solutions do not account for unforeseen events that are likely to occur and thus dramatically changing the operational conditions (e.g. node failure, communica
Industrial applications of the Kalman filter
DEFF Research Database (Denmark)
Auger, François; Hilairet, Mickael; Guerrero, Josep M.
2013-01-01
The Kalman filter has received a huge interest from the industrial electronics community and has played a key role in many engineering fields since the 70s, ranging, without being exhaustive, trajectory estimation, state and parameter estimation for control or diagnosis, data merging, signal...
Deterministic Kalman filtering in a behavioral framework
Fagnani, F; Willems, JC
1997-01-01
The purpose of this paper is to obtain a deterministic version of the Kalman filtering equations. We will use a behavioral description of the plant, specifically, an image representation. The resulting algorithm requires a matrix spectral factorization. We also show that the filter can be implemente
Q-Method Extended Kalman Filter
Zanetti, Renato; Ainscough, Thomas; Christian, John; Spanos, Pol D.
2012-01-01
A new algorithm is proposed that smoothly integrates non-linear estimation of the attitude quaternion using Davenport s q-method and estimation of non-attitude states through an extended Kalman filter. The new method is compared to a similar existing algorithm showing its similarities and differences. The validity of the proposed approach is confirmed through numerical simulations.
A distributed Kalman filter with global covariance
Sijs, J.; Lazar, M.
2011-01-01
Most distributed Kalman filtering (DKF) algorithms for sensor networks calculate a local estimate of the global state-vector in each node. An important challenge within distributed estimation is that all sensors in the network contribute to the local estimate in each node. In this paper, a novel DKF
GPS Interference Mitigation Using Derivative-free Kalman Filter-based RNN
Directory of Open Access Journals (Sweden)
W. L. Mao
2016-09-01
Full Text Available The global positioning system (GPS with accurate positioning and timing properties has become integral part of all applications around the world. Radio frequency interference can significantly decrease the performance of GPS receivers or even completely prohibit the acquisition or tracking of satellites. The approaches of system performances that can be further enhanced by preprocessing to reject the jamming signal will be investigated. A recurrent neural network (RNN predictor for the GPS anti-jamming applications will be proposed. The adaptive RNN predictor is utilized to accurately predict the narrowband waveform based on an unscented Kalman filter (UKF-based algorithm. The UKF algorithm as a derivative-free alternative to the extended Kalman filter (EKF in the framework of state-estimation is adopted to achieve better performance in terms of convergence rate and quality of solution. The adaptive RNN filter can be successfully applied for the suppression of interference with a number of different narrowband formats, i.e. continuous wave interference (CWI, multi-tone CWI, swept CWI and pulsed CWI, to emulate realistic circumstances. Simulation results show that the proposed UKF-based scheme can offer the superior performances to suppress the interference over the conventional methods by computing mean squared prediction error (MSPE and signal-to-noise ratio (SNR improvements.
卡尔曼滤波器在装载机线控转向系统中的应用%Application of Kalman filter in steer-by-wire system for loaders
Institute of Scientific and Technical Information of China (English)
李明; 柴光远
2012-01-01
In view of poor stability of steer-by-wire system for loaders after interference, the paper carried out a simulation test in MATLAB environment by combining Kalman filter with ordinary PID control. The results showed that the steer-by-wire system based on Kalman filter was superior to the one based on ordinary PID control in control performance, and had good dynamic response characteristic as well.%针对装载机线控系统受干扰后稳定性差的问题，用卡尔曼滤波器与普通PID控制相结合的方法在MATLAB环境下对系统进行仿真试验。结果表明，基于卡尔曼滤波器的线控转向系统的控制性能优于常规PID控制的线控转向系统，同时具有良好的动态响应特性。
基于Kalman过滤器的实时拖拉机位置确定系统%Real-Time Tractor Position Estimation System Using a Kalman Filter
Institute of Scientific and Technical Information of China (English)
郭林松; 何勇; 张勤; 韩树丰
2002-01-01
该文提出了一个实时拖拉机位置确定系统,该系统由一个六轴惯性测量单元(IMU)和一个Garmin全球定位系统(GPS)组成.在系统中,设计了一个Kalman过滤器来综合两个传感器的信号,以滤去GPS信号中的噪音,融合冗余信息,最后得到一个有较高更新速度的输出信号.此外该系统还能够补偿IMU的偏移误差.通过使用该系统,低价的GPS可以替代高价的GPS,并且保持良好的精确性.试验和融合结果表明该系统确定的拖拉机位置误差比单一使用GPS的系统的误差要大大减小:当拖拉机速度约为1.34 m/s时,该系统东向轴的平均偏差为0.48 m,而GPS的平均偏差为1.28 m;北向轴的偏差从1.48 m降为0.32 m.系统的更新频率则从原有GPS的1Hz增加到9Hz.%A real-time tractor position estimation system, which consists of a six-axis inertial measurement unit (IMU) and a Garmin global positioning system (GPS) was developed. A Kalman filter was designed to integrate the signals from both sensors so that the noise in GPS signal was smoothed out, the redundant information fused and a high update rate of output signals obtained. The drift error of IMU was also compensated. By using this system, a low cost GPS can be used to replace expensive one with a high accuracy. Test and fusion results showed that the positioning error of the tractor estimated using this system was greatly reduced from a GPS-only system. At a tractor speed of about 1.34 m/s, the mean bias in easting axis of the system was 0.48 m, comparing to the GPS mean bias of 1.28 m, and the mean bias in northing axis was reduced from 1.48 m to 0.32 m. The update frequency of the GPS system was increased from 1 to 9 Hz.
Institute of Scientific and Technical Information of China (English)
刘永桂; 胥布工; 史步海
2013-01-01
An optimal linear filter is derived through transferring the original linear systems to stochastic parameter systems with consecutive packet losses and time delays.A numerical simulation example is performed with results showing that this linear filter has superior performance to other existing approaches.However,the proposed filter cannot be applied to nonlinear systems.From the practical perspective,an enhanced filter is proposed and is extended to nonlinear systems.This enhanced filter has been applied successfully to an unreliable wireless sensor network (WSNs) scenario to track a moving target.The proposed filters depend only on the measurement arrival probability at all time but do not require knowing whether a measurement is received at a specific time instant.Simulations show that the proposed enhanced filter not only improves the robustness for real-time target tracking in WSNs,but also provides more accurate estimations than the standard extended Kalman filter.%通过转换原线性系统到能容忍连续丢包和测量时延的随机参数系统,推导了一个最优线性滤波器.给出一个仿真例子,比较已存在的结果,仿真结果表明被提出的线性滤波器有优越的性能.然而,该滤波器不能应用于非线性系统.从应用角度,为非线性系统提出了一个增强型的滤波器.而且,该增强型的滤波器能成功地应用于不可靠的无线传感器网络场景来跟踪移动目标.这些滤波器只依靠测量值的达到概率,而不需要知道某一时刻测量是否接收.仿真说明了被提出的增强型滤波器不仅能改善实时目标跟踪的鲁棒性,而且比标准的扩展卡尔曼滤波器能够提供更精确的估计.
On the evaluation of uncertainties for state estimation with the Kalman filter
Eichstädt, S.; Makarava, N.; Elster, C.
2016-12-01
The Kalman filter is an established tool for the analysis of dynamic systems with normally distributed noise, and it has been successfully applied in numerous areas. It provides sequentially calculated estimates of the system states along with a corresponding covariance matrix. For nonlinear systems, the extended Kalman filter is often used. This is derived from the Kalman filter by linearization around the current estimate. A key issue in metrology is the evaluation of the uncertainty associated with the Kalman filter state estimates. The ‘Guide to the Expression of Uncertainty in Measurement’ (GUM) and its supplements serve as the de facto standard for uncertainty evaluation in metrology. We explore the relationship between the covariance matrix produced by the Kalman filter and a GUM-compliant uncertainty analysis. In addition, the results of a Bayesian analysis are considered. For the case of linear systems with known system matrices, we show that all three approaches are compatible. When the system matrices are not precisely known, however, or when the system is nonlinear, this equivalence breaks down and different results can then be reached. For precisely known nonlinear systems, though, the result of the extended Kalman filter still corresponds to the linearized uncertainty propagation of the GUM. The extended Kalman filter can suffer from linearization and convergence errors. These disadvantages can be avoided to some extent by applying Monte Carlo procedures, and we propose such a method which is GUM-compliant and can also be applied online during the estimation. We illustrate all procedures in terms of a 2D dynamic system and compare the results with those obtained by particle filtering, which has been proposed for the approximate calculation of a Bayesian solution. Finally, we give some recommendations based on our findings.
Estimation of FBMC/OQAM fading channels using dual Kalman filters.
Aldababseh, Mahmoud; Jamoos, Ali
2014-01-01
We address the problem of estimating time-varying fading channels in filter bank multicarrier (FBMC/OQAM) wireless systems based on pilot symbols. The standard solution to this problem is the least square (LS) estimator or the minimum mean square error (MMSE) estimator with possible adaptive implementation using recursive least square (RLS) algorithm or least mean square (LMS) algorithm. However, these adaptive filters cannot well-exploit fading channel statistics. To take advantage of fading channel statistics, the time evolution of the fading channel is modeled by an autoregressive process and tracked by Kalman filter. Nevertheless, this requires the autoregressive parameters which are usually unknown. Thus, we propose to jointly estimate the FBMC/OQAM fading channels and their autoregressive parameters based on dual optimal Kalman filters. Once the fading channel coefficients at pilot symbol positions are estimated by the proposed method, the fading channel coefficients at data symbol positions are then estimated by using some interpolation methods such as linear, spline, or low-pass interpolation. The comparative simulation study we carried out with existing techniques confirms the effectiveness of the proposed method.
Estimation of FBMC/OQAM Fading Channels Using Dual Kalman Filters
Directory of Open Access Journals (Sweden)
Mahmoud Aldababseh
2014-01-01
Full Text Available We address the problem of estimating time-varying fading channels in filter bank multicarrier (FBMC/OQAM wireless systems based on pilot symbols. The standard solution to this problem is the least square (LS estimator or the minimum mean square error (MMSE estimator with possible adaptive implementation using recursive least square (RLS algorithm or least mean square (LMS algorithm. However, these adaptive filters cannot well-exploit fading channel statistics. To take advantage of fading channel statistics, the time evolution of the fading channel is modeled by an autoregressive process and tracked by Kalman filter. Nevertheless, this requires the autoregressive parameters which are usually unknown. Thus, we propose to jointly estimate the FBMC/OQAM fading channels and their autoregressive parameters based on dual optimal Kalman filters. Once the fading channel coefficients at pilot symbol positions are estimated by the proposed method, the fading channel coefficients at data symbol positions are then estimated by using some interpolation methods such as linear, spline, or low-pass interpolation. The comparative simulation study we carried out with existing techniques confirms the effectiveness of the proposed method.
Extended Kalman filter based structural damage detection for MR damper controlled structures
Jin, Chenhao; Jang, Shinae; Sun, Xiaorong; Jiang, Zhaoshuo; Christenson, Richard
2016-04-01
The Magneto-rheological (MR) dampers have been widely used in many building and bridge structures against earthquake and wind loadings due to its advantages including mechanical simplicity, high dynamic range, low power requirements, large force capacity, and robustness. However, research about structural damage detection methods for MR damper controlled structures is limited. This paper aims to develop a real-time structural damage detection method for MR damper controlled structures. A novel state space model of MR damper controlled structure is first built by combining the structure's equation of motion and MR damper's hyperbolic tangent model. In this way, the state parameters of both the structure and MR damper are added in the state vector of the state space model. Extended Kalman filter is then used to provide prediction for state variables from measurement data. The two techniques are synergistically combined to identify parameters and track the changes of both structure and MR damper in real time. The proposed method is tested using response data of a three-floor MR damper controlled linear building structure under earthquake excitation. The testing results show that the adaptive extended Kalman filter based approach is capable to estimate not only structural parameters such as stiffness and damping of each floor, but also the parameters of MR damper, so that more insights and understanding of the damage can be obtained. The developed method also demonstrates high damage detection accuracy and light computation, as well as the potential to implement in a structural health monitoring system.
Nonlinear Kalman Filtering in Affine Term Structure Models
DEFF Research Database (Denmark)
Christoffersen, Peter; Dorion, Christian; Jacobs, Kris;
2014-01-01
The extended Kalman filter, which linearizes the relationship between security prices and state variables, is widely used in fixed-income applications. We investigate whether the unscented Kalman filter should be used to capture nonlinearities and compare the performance of the Kalman filter...... with that of the particle filter. We analyze the cross section of swap rates, which are mildly nonlinear in the states, and cap prices, which are highly nonlinear. When caps are used to filter the states, the unscented Kalman filter significantly outperforms its extended counterpart. The unscented Kalman filter also...
强跟踪滤波器在高动态G PS信号跟踪中的应用%Strong tracking Kalman filter loop applied for high dynamic GPS signals
Institute of Scientific and Technical Information of China (English)
王熙赢; 陈熙源
2014-01-01
A novel linear STKF(strong tracking Kalman filter)-based GPS (global positioning sys-tem)tracking-loop estimator is developed to resolve the losing lock problem of GPS IF (intermediate frequency)signal tracking loop in high dynamic environment.Code phase detector and Carrier wave phase detector are used as the observations of the STKF.The code phase errors,carrier phase errors, Doppler shift errors and the rate of change of Doppler shift errors are estimated with the STKF.The estimation results of the STKF are responded to the tracking-loop NCOs (numerically controlled os-cillator)to generate accurate local carrier and local code.The simulation results indicate that,in the case that the carrier-to-noise ratio is 45 dBHz,the STKF tracking loop works well even if the change rate of Doppler shift reaches 5 .0 kHz/s,but the traditional tracking loop based on PLL (phase lock loop)/DLL (delay locked loop)and loop filters may lose lock at 1 .8 kHz/s.%为解决在高动态环境下GPS接收机跟踪环路中频信号失锁的问题，提出了一种基于线性强跟踪卡尔曼滤波器（STKF）理论的GPS信号跟踪环路．此跟踪环路以码鉴相器和载波鉴相器输出作为观测量，利用线性强跟踪卡尔曼滤波器对高动态环境下的码相位误差、载波相位误差、多普勒频率误差以及多普勒频率变化率误差进行估计，并将估计结果反馈给跟踪环路的数控振荡器，从而产生准确的本地载波和本地码．仿真结果表明，在GPS信号载噪比为45 dB Hz时，线性强跟踪卡尔曼滤波器跟踪环路在多普勒频率变化率为5．0 kHz/s时仍能可靠跟踪，而传统的基于PLL/DLL和环路滤波器的跟踪环路在1．8 kHz/s时已经失锁．
Institute of Scientific and Technical Information of China (English)
李荣冰; 黄隽祎; 刘建业; 谢非
2014-01-01
Doppler shift and signal power attenuation in the complex environment both can make damage in the accuracy of carrier tracking. Therefore, the non-linear Kalman filter for carrier tracking is designed, which makes correlated observations in the EKF and UKF model based on the analysis of the structure of BeiDou B1 signal. By using measurements from the estimation of filtering in feedback control of the carrier tracking loop, higher and more stable performance can be given in high dynamic and weak signal environments. Finally, the test results show that the feedback control-based EKF and UKF model can perform precise carrier tracking, and make a good limitation of loop error, both of which lead to realization of high performance of signal tracking.%复杂环境下的多普勒频移变化及信号功率衰减均会对载波准确跟踪造成影响。在研究北斗卫星B1频点信号结构的基础上，建立以环路中相关积分值为观测量的非线性EKF模型和UKF模型，并提出利用滤波估计状态量进行状态反馈控制的方法，从而解决了载波跟踪环路在高动态及弱信号环境中难以高性能工作的问题。实验结果表明，状态反馈控制的EKF模型和UKF滤波模型能准确地跟踪弱信号及高动态下的信号变化，从而有效控制跟踪误差，为实现快速准确的载波跟踪奠定了基础。
VLBI real-time analysis by Kalman Filtering
Karbon, Maria; Soja, Benedikt; Nilson, Tobias; Heinkelmann, Robert; Liu, Li; Lu, Ciuxian; Xu, Minghui; Raposo-Pulido, Virginia; Mora-Diaz, Julian; Schuh, Harald
2014-05-01
Geodetic Very Long Baseline Interferometry (VLBI) is one of the primary space geodetic techniques. It provides the full set of Earth Orientation Parameter (EOP) and is unique for observing long term Universal Time (UT1) and precession/nutation. Currently the VLBI products are delivered with a delay of about two weeks from the moment of the observation. However, the need for near-real time estimates of the parameters is increasing, e.g. for satellite based navigation and positioning or for enabling precise tracking of interplanetary spacecraft. The goal is thus to reduce the time span between observation and the final result to less than one day. This can be archived by replacing the classical least squares method with an adaptive Kalman filter. We have developed a Kalman filter for VLBI data analysis. This method has the advantage that it is simultaneously possible to estimate stationary parameters, e.g. station positions, and to model the highly variable stochastic behavior of non-stationary parameters like clocks or atmospheric parameters. The filter is able to perform without any human interaction, making it a completely autonomous tool. In this work we describe the filter and discuss its application for EOP determination and prediction. We discuss the implementation of the stochastic models to statistically account for unpredictable changes in EOP. Furthermore, additional data like results from other techniques can be included to improve the performance. For example, atmospheric angular momentum calculated from numerical weather models can be introduced to supplement the short-term prediction of UT1 and polar motion. This Kalman filter will be extended and embedded in the newly developed Vienna VLBI Software (VieVS) as a completely autonomous tool enabling the VLBI analysis in near real-time and providing all the parameters of interest with the highest possible accuracy.
Switching Kalman filter for failure prognostic
Lim, Chi Keong Reuben; Mba, David
2015-02-01
The use of condition monitoring (CM) data to predict remaining useful life have been growing with increasing use of health and usage monitoring systems on aircraft. There are many data-driven methodologies available for the prediction and popular ones include artificial intelligence and statistical based approach. The drawback of such approaches is that they require a lot of failure data for training which can be scarce in practice. In lieu of this, methods using state-space and regression-based models that extract information from the data history itself have been explored. However, such methods have their own limitations as they utilize a single time-invariant model which does not represent changing degradation path well. This causes most degradation modeling studies to focus only on segments of their CM data that behaves close to the assumed model. In this paper, a state-space based method; the Switching Kalman Filter (SKF), is adopted for model estimation and life prediction. The SKF approach however, uses multiple models from which the most probable model is inferred from the CM data using Bayesian estimation before it is applied for prediction. At the same time, the inference of the degradation model itself can provide maintainers with more information for their planning. This SKF approach is demonstrated with a case study on gearbox bearings that were found defective from the Republic of Singapore Air Force AH64D helicopter. The use of in-service CM data allows the approach to be applied in a practical scenario and results showed that the developed SKF approach is a promising tool to support maintenance decision-making.
Dikpati, Mausumi; Mitra, Dhrubaditya
2014-01-01
Accurate knowledge of time-variation in meridional flow-speed and profile is crucial for estimating a solar cycle's features, which are ultimately responsible for causing space climate variations. However, no consensus has been reached yet about the Sun's meridional circulation pattern observations and theories. By implementing an Ensemble Kalman Filter (EnKF) data assimilation in a Babcock-Leighton solar dynamo model using Data Assimilation Research Testbed (DART) framework, we find that the best reconstruction of time-variation in meridional flow-speed can be obtained when ten or more observations are used with an updating time of 15 days and a $\\le 10\\%$ observational error. Increasing ensemble-size from 16 to 160 improves reconstruction. Comparison of reconstructed flow-speed with "true-state" reveals that EnKF data assimilation is very powerful for reconstructing meridional flow-speeds and suggests that it can be implemented for reconstructing spatio-temporal patterns of meridional circulation.
Study of Mobile-robot RFID Position System Based on Extended Kalman Filter%基于EKF的移动机器人RFID定位系统研究
Institute of Scientific and Technical Information of China (English)
郭建明; 周华; 刘清
2009-01-01
由于RFID读取器对标签的距离不可知, 基于RFID的定位会产生固有误差.为了减小RFID定位系统的固有误差, 研究了移动机器人融合RFID、超声波、电子罗盘和里程汁自定位的方法, 通过扩展卡尔曼滤波(extended Kalman filter, EKF)解决RFID定位在位姿更新之间的误差累积, 提高定位的性能.通过Matlab仿真, 试验结果表明该算法可行且有效.
Cuff-less blood pressure measurement using pulse arrival time and a Kalman filter
Zhang, Qiang; Chen, Xianxiang; Fang, Zhen; Xue, Yongjiao; Zhan, Qingyuan; Yang, Ting; Xia, Shanhong
2017-02-01
The present study designs an algorithm to increase the accuracy of continuous blood pressure (BP) estimation. Pulse arrival time (PAT) has been widely used for continuous BP estimation. However, because of motion artifact and physiological activities, PAT-based methods are often troubled with low BP estimation accuracy. This paper used a signal quality modified Kalman filter to track blood pressure changes. A Kalman filter guarantees that BP estimation value is optimal in the sense of minimizing the mean square error. We propose a joint signal quality indice to adjust the measurement noise covariance, pushing the Kalman filter to weigh more heavily on measurements from cleaner data. Twenty 2 h physiological data segments selected from the MIMIC II database were used to evaluate the performance. Compared with straightforward use of the PAT-based linear regression model, the proposed model achieved higher measurement accuracy. Due to low computation complexity, the proposed algorithm can be easily transplanted into wearable sensor devices.
Wellbore Surveying While Drilling Based on Kalman Filtering
Directory of Open Access Journals (Sweden)
Mahmoud ElGizawy
2010-01-01
by designing a reliable real-time low cost MWD surveying system based on MEMS inertial sensors miniaturized inside the RSS housing installed directly behind the drill bit. A continuous borehole surveying module based on MEMS inertial sensors integrated with other drilling measurements was developed using Kalman filtering.
RAPID TRANSFER ALIGNMENT USING FEDERATED KALMAN FILTER
Institute of Scientific and Technical Information of China (English)
GUDong-qing; QINYong-yuan; PENGRong; LIXin
2005-01-01
The dimension number of the centralized Kalman filter (CKF) for the rapid transfer alignment (TA) is as high as 21 if the aircraft wing flexure motion is considered in the rapid TA. The 21-dimensional CKF brings the calculation burden on the computer and the difficulty to meet a high filtering updating rate desired by rapid TA. The federated Kalman filter (FKF) for the rapid TA is proposed to solve the dilemma. The structure and the algorithm of the FKF, which can perform parallel computation and has less calculation burden, are designed.The wing flexure motion is modeled, and then the 12-order velocity matching local filter and the 15-order attitud ematching local filter are devised. Simulation results show that the proposed EKE for the rapid TA almost has the same performance as the CKF. Thus the calculation burden of the proposed FKF for the rapid TA is markedly decreased.
Vision-aided Navigation for Autonomous Aircraft Based on Unscented Kalman Filter
Directory of Open Access Journals (Sweden)
Junwei Yu
2013-02-01
Full Text Available A vision-aided navigation system for autonomous aircraft is described in this paper. The vision navigation of the aircraft to the known scence is performed with a camera fixed on the aircraft. The location and pose of the aircraft are estimated with the corresponding control points which can be detected in the images captured. The control points are selected according their saliency and are tracked in sequential images based on Fourier-Melline transform. The simulation model of the aircraft dynamics and vision-aided navigation system based on Matlab/Simulink is built.The unscented Kalman filter is used to fuse the aircraft state information provided by the vision system and the inertial navigation system. Simulation results show that the vision-based navigation system provides satisfactory results of both accuracy and reliability.
Optimal subband Kalman filter for normal and oesophageal speech enhancement.
Ishaq, Rizwan; García Zapirain, Begoña
2014-01-01
This paper presents the single channel speech enhancement system using subband Kalman filtering by estimating optimal Autoregressive (AR) coefficients and variance for speech and noise, using Weighted Linear Prediction (WLP) and Noise Weighting Function (NWF). The system is applied for normal and Oesophageal speech signals. The method is evaluated by Perceptual Evaluation of Speech Quality (PESQ) score and Signal to Noise Ratio (SNR) improvement for normal speech and Harmonic to Noise Ratio (HNR) for Oesophageal Speech (OES). Compared with previous systems, the normal speech indicates 30% increase in PESQ score, 4 dB SNR improvement and OES shows 3 dB HNR improvement.
A robust optical/inertial data fusion system for motion tracking of the robot manipulator
Institute of Scientific and Technical Information of China (English)
Jie CHEN; Can-jun YANG; Jens HOFSCHULTE; Wan-li JIANG; Cha ZHANG
2014-01-01
We present an optical/inertial data fusion system for motion tracking of the robot manipulator, which is proved to be more robust and accurate than a normal optical tracking system (OTS). By data fusion with an inertial measurement unit (IMU), both robustness and accuracy of OTS are improved. The Kalman filter is used in data fusion. The error distribution of OTS pro-vides an important reference on the estimation of measurement noise using the Kalman filter. With a proper setup of the system and an effective method of coordinate frame synchronization, the results of experiments show a significant improvement in terms of robustness and position accuracy.
A Recursive Kalman Filter Forecasting Approach
Douglas R. Kahl; Johannes Ledolter
1983-01-01
This paper examines the forecasting accuracy and the cost effectiveness of time series models with time-varying coefficients. A simulation study investigates the potential forecasting benefits of a proposed Kalman filter type adaptive estimation and forecasting approach. It is found that: (1) When appropriate, the time-varying coefficient approach leads to better forecasts than the constant coefficient procedures. (2) A simple decision rule, which indicates whether time-varying coefficient mo...
Reduced Kalman Filters for Clock Ensembles
Greenhall, Charles A.
2011-01-01
This paper summarizes the author's work ontimescales based on Kalman filters that act upon the clock comparisons. The natural Kalman timescale algorithm tends to optimize long-term timescale stability at the expense of short-term stability. By subjecting each post-measurement error covariance matrix to a non-transparent reduction operation, one obtains corrected clocks with improved short-term stability and little sacrifice of long-term stability.
Espinosa, Felipe; Santos, Carlos; Marrón-Romera, Marta; Pizarro, Daniel; Valdés, Fernando; Dongil, Javier
2011-01-01
This paper describes a relative localization system used to achieve the navigation of a convoy of robotic units in indoor environments. This positioning system is carried out fusing two sensorial sources: (a) an odometric system and (b) a laser scanner together with artificial landmarks located on top of the units. The laser source allows one to compensate the cumulative error inherent to dead-reckoning; whereas the odometry source provides less pose uncertainty in short trajectories. A discrete Extended Kalman Filter, customized for this application, is used in order to accomplish this aim under real time constraints. Different experimental results with a convoy of Pioneer P3-DX units tracking non-linear trajectories are shown. The paper shows that a simple setup based on low cost laser range systems and robot built-in odometry sensors is able to give a high degree of robustness and accuracy to the relative localization problem of convoy units for indoor applications.
Directory of Open Access Journals (Sweden)
Fernando Valdés
2011-08-01
Full Text Available This paper describes a relative localization system used to achieve the navigation of a convoy of robotic units in indoor environments. This positioning system is carried out fusing two sensorial sources: (a an odometric system and (b a laser scanner together with artificial landmarks located on top of the units. The laser source allows one to compensate the cumulative error inherent to dead-reckoning; whereas the odometry source provides less pose uncertainty in short trajectories. A discrete Extended Kalman Filter, customized for this application, is used in order to accomplish this aim under real time constraints. Different experimental results with a convoy of Pioneer P3-DX units tracking non-linear trajectories are shown. The paper shows that a simple setup based on low cost laser range systems and robot built-in odometry sensors is able to give a high degree of robustness and accuracy to the relative localization problem of convoy units for indoor applications.
Telescope Multi-Field Wavefront Control with a Kalman Filter
Lou, John Z.; Redding, David; Sigrist, Norbert; Basinger, Scott
2008-01-01
An effective multi-field wavefront control (WFC) approach is demonstrated for an actuated, segmented space telescope using wavefront measurements at the exit pupil, and the optical and computational implications of this approach are discussed. The integration of a Kalman Filter as an optical state estimator into the wavefront control process to further improve the robustness of the optical alignment of the telescope will also be discussed. Through a comparison of WFC performances between on-orbit and ground-test optical system configurations, the connection (and a possible disconnection) between WFC and optical system alignment under these circumstances are analyzed. Our MACOS-based computer simulation results will be presented and discussed.
Series load induction heating inverter state estimator using Kalman filter
Directory of Open Access Journals (Sweden)
Szelitzky T.
2011-12-01
Full Text Available LQR and H2 controllers require access to the states of the controlled system. The method based on description function with Fourier series results in a model with immeasurable states. For this reason, we proposed a Kalman filter based state estimator, which not only filters the input signals, but also computes the unobservable states of the system. The algorithm of the filter was implemented in LabVIEW v8.6 and tested on recorded data obtained from a 10-40 kHz series load frequency controlled induction heating inverter.
Institute of Scientific and Technical Information of China (English)
孙玉山; 李岳明; 万磊; 庞永杰
2013-01-01
针对自主水下机器人(AUV)的工作特点与执行水下作业任务时对导航的需求,构建了基于航位推算的AUV组合导航系统体系结构,建立了水下机器人运动方程与观测方程,采用自适应卡尔曼滤波对水下机器人传感器信息进行数据处理.针对自适应卡尔曼滤波方法的缺点,采取渐消记忆指数加权方法引入了遗忘因子,并采用预报残差的方法求解最佳遗忘因子,同时采取措施保证了系统噪声估计方差阵和测量噪声估计方差阵的半正定性和正定性,避免了滤波发散现象.海试实验结果表明,改进的自适应卡尔曼滤波具有良好的滤波效果,可以满足水下机器人执行各种作业任务的水下导航定位精度.%According to the working characteristics of autonomous underwater vehicles (AUVs) and their navigation requirements when performing underwater tasks, the architecture of integrated navigation systems for AUVs based on dead-reckoning was designed. The motion equation and the observation equation of underwater vehicles were constructed , and a self-adaptive Kalman filter was adopted for processing the data from underwater vehicles' sensors. To overcome the disadvantages of the self-adaptive Kalman filter, the forgetting factor was introduced based on the fading exponent method, and the residual prediction algorithm was used for computing the optimal forgetting factor. And some measures were taken to ensure the half positive of the matrix of system noisy estimation and the positive of the matrix of measure noisy estimation, which can avoid divergence. The sea experimental results show that the improved self-adaptive Kalman filter method is effective, and can meet the AUVs' demand in navigation and positioning when they carry out underwater missions.
Tractography from HARDI using an intrinsic unscented Kalman filter.
Cheng, Guang; Salehian, Hesamoddin; Forder, John R; Vemuri, Baba C
2015-01-01
A novel adaptation of the unscented Kalman filter (UKF) was recently introduced in literature for simultaneous multitensor estimation and fiber tractography from diffusion MRI. This technique has the advantage over other tractography methods in terms of computational efficiency, due to the fact that the UKF simultaneously estimates the diffusion tensors and propagates the most consistent direction to track along. This UKF and its variants reported later in literature however are not intrinsic to the space of diffusion tensors. Lack of this key property can possibly lead to inaccuracies in the multitensor estimation as well as in the tractography. In this paper, we propose a novel intrinsic unscented Kalman filter (IUKF) in the space of diffusion tensors which are symmetric positive definite matrices, that can be used for simultaneous recursive estimation of multitensors and propagation of directional information for use in fiber tractography from diffusion weighted MR data. In addition to being more accurate, IUKF retains all the advantages of UKF mentioned above. We demonstrate the accuracy and effectiveness of the proposed method via experiments publicly available phantom data from the fiber cup-challenge (MICCAI 2009) and diffusion weighted MR scans acquired from human brains and rat spinal cords.
Esteban, Segundo; Girón-Sierra, Jose M; Polo, Óscar R; Angulo, Manuel
2016-10-31
Most satellites use an on-board attitude estimation system, based on available sensors. In the case of low-cost satellites, which are of increasing interest, it is usual to use magnetometers and Sun sensors. A Kalman filter is commonly recommended for the estimation, to simultaneously exploit the information from sensors and from a mathematical model of the satellite motion. It would be also convenient to adhere to a quaternion representation. This article focuses on some problems linked to this context. The state of the system should be represented in observable form. Singularities due to alignment of measured vectors cause estimation problems. Accommodation of the Kalman filter originates convergence difficulties. The article includes a new proposal that solves these problems, not needing changes in the Kalman filter algorithm. In addition, the article includes assessment of different errors, initialization values for the Kalman filter; and considers the influence of the magnetic dipole moment perturbation, showing how to handle it as part of the Kalman filter framework.
Directory of Open Access Journals (Sweden)
Segundo Esteban
2016-10-01
Full Text Available Most satellites use an on-board attitude estimation system, based on available sensors. In the case of low-cost satellites, which are of increasing interest, it is usual to use magnetometers and Sun sensors. A Kalman filter is commonly recommended for the estimation, to simultaneously exploit the information from sensors and from a mathematical model of the satellite motion. It would be also convenient to adhere to a quaternion representation. This article focuses on some problems linked to this context. The state of the system should be represented in observable form. Singularities due to alignment of measured vectors cause estimation problems. Accommodation of the Kalman filter originates convergence difficulties. The article includes a new proposal that solves these problems, not needing changes in the Kalman filter algorithm. In addition, the article includes assessment of different errors, initialization values for the Kalman filter; and considers the influence of the magnetic dipole moment perturbation, showing how to handle it as part of the Kalman filter framework.
Institute of Scientific and Technical Information of China (English)
张传斌; 田蔚风; 金志华
2005-01-01
In a land vehicle navigation system, generally the Extended Kalman Filter (EKF) is as a state estimation method to improve the accuracy of navigation. However, as defects of the EKF in nonlinear estimation, there exists estimated error, which affects the accuracy of the navigation system, when it is adopted in nonlinear estimation of a navigation system. In order to yield the higher accuracy of navigation, a novel method-Unscented Kalman Filter (UKF) was employed in state estimation for a land vehicle navigation system. For a land vehicle DR/GPS navigation system, the EKF and UKF are compared through simulation. Simulation results show that the UKF is superior to the EKF in state estimation for a land vehicle navigation system.%在车载导航系统中,通常采用EKF作为状态估计方法提高导航的精度.由于EKF进行非线性估计存在一些缺陷,因此将其用于导航系统的非线性估计时,存在估计误差,从而影响导航系统的精度.为了获得更高的导航精度,将一种新的滤波方法-UKF方法用于车载导航系统的状态估计中.对一个车载DR/GPS组合系统,将EKF和UKF方法分别进行了滤波仿真.仿真结果表明:在车载导航状态估计中,UKF方法优于EKF方法.
4-D-Var or ensemble Kalman filter?
Kalnay, Eugenia; LI, HONG; Miyoshi, Takemasa; Yang, Shu-Chih; Ballabrera-Poy, Joaquim
2007-01-01
We consider the relative advantages of two advanced data assimilation systems, 4-D-Var and ensemble Kalman filter (EnKF), currently in use or under consideration for operational implementation. With the Lorenz model, we explore the impact of tuning assimilation parameters such as the assimilation window length and background error covariance in 4-D-Var, variance inflation in EnKF, and the effect of model errors and reduced observation coverage. For short assimilation windows EnKF gives more a...
Adaptive training of feedforward neural networks by Kalman filtering
Energy Technology Data Exchange (ETDEWEB)
Ciftcioglu, Oe. [Istanbul Technical Univ. (Turkey). Dept. of Electrical Engineering; Tuerkcan, E. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands)
1995-02-01
Adaptive training of feedforward neural networks by Kalman filtering is described. Adaptive training is particularly important in estimation by neural network in real-time environmental where the trained network is used for system estimation while the network is further trained by means of the information provided by the experienced/exercised ongoing operation. As result of this, neural network adapts itself to a changing environment to perform its mission without recourse to re-training. The performance of the training method is demonstrated by means of actual process signals from a nuclear power plant. (orig.).
Application of Unscented Kalman Filter in Satellite Orbit Simulation
Institute of Scientific and Technical Information of China (English)
ZHAO Dongming; CAI Zhiwu
2006-01-01
A new estimate method is proposed, which takes advantage of the unscented transform method, thus the true mean and covariance are approximated more accurately. The new method can be applied to non-linear systems without the linearization process necessary for the EKF, and it does not demand a Gaussian distribution of noise and what's more, its ease of implementation and more accurate estimation features enables it to demonstrate its good performance in the experiment of satellite orbit simulation. Numerical experiments show that the application of the unscented Kalman filter is more effective than the EKF.
Directory of Open Access Journals (Sweden)
Oh Hyunmin
2015-01-01
Full Text Available Tracking system is essential for Image Guided Surgery(IGS. The Optical Tracking Sensor(OTS has been widely used as tracking system for IGS due to its high accuracy and easy usage. However, OTS has a limit that tracking fails when occlusion of marker occurs. In this paper, sensor fusion with OTS and Inertial Measurement Unit(IMU is proposed to solve this problem. The proposed algorithm improves the accuracy of tracking system by eliminating scattering error of the sensor and supplements the disadvantages of OTS and IMU through sensor fusion based on Kalman filter. Also, coordinate axis calibration method that improves the accuracy is introduced. The performed experiment verifies the effectualness of the proposed algorithm.
弗德卡曼滤波阶比跟踪解耦新方法%New decoupling approach for Vold-Kalman-filtering order tracking
Institute of Scientific and Technical Information of China (English)
郭瑜; 迟毅林
2009-01-01
Vold-Kalman-fihering order tracking (VKF_OT) is famous due to its decoupling ability for crossing or close orders. However, the conventional decoupling approach for VKF_OT has two deficiencies in application. First, it is a time-consuming scheme; second, it becomes invalid when the instantaneous frequencies of coupled order disturbances are unknown. A new approach decoupling crossing orders with VKF_OT was proposed here. It utilized the independent component analysis (ICA) approach to separate the mixed observed data into the order components corresponding to inde- pendent components and order-coupled disturbances. Subsequently, VKF_OT was only applied to the separated order components corresponding to independent components. The deficiencies for the conventional decoupling method, such as, the intensive computations and requirement of the instantaneous frequency of disturbance signals were avoided. Following the brief instruction of VKF_OT and ICA, the scheme of the proposed approach was presented. Simulations and tests were also introduced to evaluate the validity of the proposed approach.%弗德卡曼(Void-Kalman)滤波阶比跟踪法是目前旋转机械阶比分析中能对阶比耦合干扰进行有效解耦操作的方法.但是传统的弗德卡曼升滤波懈耦方法存在计算效率低,在无法充分获得耦合阶比瞬时频率信息时不能使用等不足.本文提出了一种基于独立分量分析技术的弗德卡曼滤波阶比跟踪解耦方法.其先将混合观察信号分解为阶比分量、耦合干扰等不同的独立信号分量,再在此基础上对分离出的阶比分量信号对应独立信号分量进行弗德卡曼滤波阶比跟踪分析,有效解决了传统解耦方法计算效率低,解耦需要干扰信号瞬时频率的不足.文中对弗德卡曼滤波阶比跟踪和独立分量分析的基本原理进行了简要介绍,在此基础上提出了本方法的实现方案.通过仿真试验和实际测试对本方法的有效性进行了评价.
Directory of Open Access Journals (Sweden)
Arslan Hüseyin
2009-01-01
Full Text Available Long-Term Evolution (LTE systems will employ single carrier frequency division multiple access (SC-FDMA for the uplink. Similar to the Orthogonal frequency-division multiple access (OFDMA technology, SC-FDMA is sensitive to frequency offsets leading to intercarrier interference (ICI. In this paper, we propose a Kalman filter-based approach in order to mitigate ICI under high Doppler spread scenarios by tracking the variation of channel taps jointly in time domain for LTE uplink systems. Upon acquiring the estimates of channel taps from the Kalman tracker, we employ an interpolation algorithm based on polynomial fitting whose order is changed adaptively. The proposed method is evaluated under four different scenarios with different settings in order to reflect the impact of various critical parameters on the performance such as propagation environment, speed, and size of resource block (RB assignments. Results are given along with discussions.
Fuzzy adaptive Kalman filter for indoor mobile target positioning with INS/WSN integrated method
Institute of Scientific and Technical Information of China (English)
杨海; 李威; 罗成名
2015-01-01
Pure inertial navigation system (INS) has divergent localization errors after a long time. In order to compensate the disadvantage, wireless sensor network (WSN) associated with the INS was applied to estimate the mobile target positioning. Taking traditional Kalman filter (KF) as the framework, the system equation of KF was established by the INS and the observation equation of position errors was built by the WSN. Meanwhile, the observation equation of velocity errors was established by the velocity difference between the INS and WSN, then the covariance matrix of Kalman filter measurement noise was adjusted with fuzzy inference system (FIS), and the fuzzy adaptive Kalman filter (FAKF) based on the INS/WSN was proposed. The simulation results show that the FAKF method has better accuracy and robustness than KF and EKF methods and shows good adaptive capacity with time-varying system noise. Finally, experimental results further prove that FAKF has the fast convergence error, in comparison with KF and EKF methods.
Applying Kalman filtering to investigate tropospheric effects in VLBI
Soja, Benedikt; Nilsson, Tobias; Karbon, Maria; Heinkelmann, Robert; Liu, Li; Lu, Cuixian; Andres Mora-Diaz, Julian; Raposo-Pulido, Virginia; Xu, Minghui; Schuh, Harald
2014-05-01
Very Long Baseline Interferometry (VLBI) currently provides results, e.g., estimates of the tropospheric delays, with a delay of more than two weeks. In the future, with the coming VLBI2010 Global Observing System (VGOS) and increased usage of electronic data transfer, it is planned that the time between observations and results is decreased. This may, for instance, allow the integration of VLBI-derived tropospheric delays into numerical weather prediction models. Therefore, future VLBI analysis software packages need to be able to process the observational data autonomously in near real-time. For this purpose, we have extended the Vienna VLBI Software (VieVS) by a Kalman filter module. This presentation describes the filter and discusses its application for tropospheric studies. Instead of estimating zenith wet delays as piece-wise linear functions in a least-squares adjustment, the Kalman filter allows for more sophisticated stochastic modeling. We start with a random walk process to model the time-dependent behavior of the zenith wet delays. Other possible approaches include the stochastic model described by turbulence theory, e.g. the model by Treuhaft and Lanyi (1987). Different variance-covariance matrices of the prediction error, depending on the time of the year and the geographic latitude, have been tested. In winter and closer to the poles, lower variances and covariances are appropriate. The horizontal variations in tropospheric delays have been investigated by comparing three different strategies: assumption of a horizontally stratified troposphere, using north and south gradients modeled, e.g., as Gauss-Markov processes, and applying a turbulence model assuming correlations between observations in different azimuths. By conducting Monte-Carlo simulations of current standard VLBI networks and of future VGOS networks, the different tropospheric modeling strategies are investigated. For this purpose, we use the simulator module of VieVS which takes into
Autonomous Orbit Determination via Kalman Filtering of Gravity Gradients
Sun, Xiucong; Macabiau, Christophe; Han, Chao
2016-01-01
Spaceborne gravity gradients are proposed in this paper to provide autonomous orbit determination capabilities for near Earth satellites. The gravity gradients contain useful position information which can be extracted by matching the observations with a precise gravity model. The extended Kalman filter is investigated as the principal estimator. The stochastic model of orbital motion, the measurement equation and the model configuration are discussed for the filter design. An augmented state filter is also developed to deal with unknown significant measurement biases. Simulations are conducted to analyze the effects of initial errors, data-sampling periods, orbital heights, attitude and gradiometer noise levels, and measurement biases. Results show that the filter performs well with additive white noise observation errors. Degraded observability for the along-track position is found for the augmented state filter. Real flight data from the GOCE satellite are used to test the algorithm. Radial and cross-track...
Yoon, Paul K; Zihajehzadeh, Shaghayegh; Bong-Soo Kang; Park, Edward J
2015-08-01
This paper proposes a novel indoor localization method using the Bluetooth Low Energy (BLE) and an inertial measurement unit (IMU). The multipath and non-line-of-sight errors from low-power wireless localization systems commonly result in outliers, affecting the positioning accuracy. We address this problem by adaptively weighting the estimates from the IMU and BLE in our proposed cascaded Kalman filter (KF). The positioning accuracy is further improved with the Rauch-Tung-Striebel smoother. The performance of the proposed algorithm is compared against that of the standard KF experimentally. The results show that the proposed algorithm can maintain high accuracy for position tracking the sensor in the presence of the outliers.
Improve the Handover Decision Based on a Kalman Filter and Fuzzy
Directory of Open Access Journals (Sweden)
Rula Sami Khudhair
2017-07-01
Full Text Available The major aim of a Mobile network system is to provide premium Quality of Service (QoS to the user by an establishment of guaranteed seamless connection between the users. The radio signal strength has been regularly measured from mobile station and BTS in a cellular network. If the BTS detects a decrease in the radio signal, it initiates a handoff request. Many parameters have been effected by the handoff decision. In this paper, a proposed algorithm has been presented to track the mobile location, distance, and velocity by using Kalman filter, while, monitoring the mobile direction, and measure RSS. Then applying the Fuzzy Membership Function of RSS and distance to decide the handoff decision. From the results, it is cleared the advancement in the handoff performance.
Battery State-of-Charge and Parameter Estimation Algorithm Based on Kalman Filter
DEFF Research Database (Denmark)
Dragicevic, Tomislav; Sucic, Stjepan; Guerrero, Josep M.
2013-01-01
Electrochemical battery is the most widely used energy storage technology, finding its application in various devices ranging from low power consumer electronics to utility back-up power. All types of batteries show highly non-linear behaviour in terms of dependence of internal parameters...... on operating conditions, momentary replenishment and a number of past charge/discharge cycles. A good indicator for the quality of overall customer service in any battery based application is the availability and reliability of these informations, as they point out important runtime variables...... such as the actual state of charge (SOC) and state of health (SOH). Therefore, a modern battery management systems (BMSs) should incorporate functions that accommodate real time tracking of these nonlinearities. For that purpose, Kalman filter based algorithms emerged as a convenient solution due to their ability...
卡尔曼滤波在自平衡机器人系统中的应用%Application Research of Kalman filter in self-balancing robot system
Institute of Scientific and Technical Information of China (English)
李凡红; 庄秋月; 董春
2013-01-01
为了对自平衡机器人运行状态进行有效的识别，鉴于单一传感器较难独立完成，因此本文采用多传感器数据融合方法设计了相应的卡尔曼滤波器，由此得到快速、精确、可靠的机器人姿态和运动信息，以便微控制器决策；并通过MATLAB仿真和LEGO机器人的实验平台验证了该方法在两轮机器人的平衡运动方面有较理想的控制效果，能够对该系统进行实时控制以满足适应其复杂的环境。%In order to identify the real-time state of self-balancing robot effectively, a sensor such as accelerator or gyroscope, can not work well alone , so a multi-sensor data fusion method is adopted and the corresponding Kalman filter is designed as well. Through it, we can acquire fast, accurate and reliable robot posture and motion information and these data can be provided to MUC for control as well. Meanwhile, through relative MATLAB simulation and LEGO robot experimental platform, it is verified that the multi-sensor data fusion Kalman filter does well in performance in balance and motion of the robot. Thereof it achieves better real-time control of the system to meet the needs to adapt to its complex environment.
A Hybrid Extended Kalman Filter as an Observer for a Pot-Electro-Magnetic Actuator
Schmidt, Simon; Mercorelli, Paolo
2017-01-01
This paper deals with an application in which a hybrid extended Kalman Filter (HEKF) is used to estimate state variables in a U-shaped electro-magnetic actuator to be used in mechanical systems. In this context a hybrid Kalman Filter is the one which switches between different models. The paper proposes a hybrid model for an extended Kalman Filter to be used as an observer to estimate the state and to control the force of the actuator. Applications include position, velocity and force control in automotive, engine and manufacturing systems. This work is focused on the estimation of state variables of the actuator. Simulated results show the effectiveness of the proposed approach.
Convergence study in extended Kalman filter-based training of recurrent neural networks.
Wang, Xiaoyu; Huang, Yong
2011-04-01
Recurrent neural network (RNN) has emerged as a promising tool in modeling nonlinear dynamical systems, but the training convergence is still of concern. This paper aims to develop an effective extended Kalman filter-based RNN training approach with a controllable training convergence. The training convergence problem during extended Kalman filter-based RNN training has been proposed and studied by adapting two artificial training noise parameters: the covariance of measurement noise (R) and the covariance of process noise (Q) of Kalman filter. The R and Q adaption laws have been developed using the Lyapunov method and the maximum likelihood method, respectively. The effectiveness of the proposed adaption laws has been tested using a nonlinear dynamical benchmark system and further applied in cutting tool wear modeling. The results show that the R adaption law can effectively avoid the divergence problem and ensure the training convergence, whereas the Q adaption law helps improve the training convergence speed.
Multimodal Degradation Prognostics Based on Switching Kalman Filter Ensemble.
Lim, Pin; Goh, Chi Keong; Tan, Kay Chen; Dutta, Partha
2017-01-01
For accurate prognostics, users have to determine the current health of the system and predict future degradation pattern of the system. An increasingly popular approach toward tackling prognostic problems involves the use of switching models to represent various degradation phases, which the system undergoes. Such approaches have the advantage of determining the exact degradation phase of the system and being able to handle nonlinear degradation models through piecewise linear approximation. However, limitations of such existing methods include, limited applicability due to the discretization of predicted remaining useful life, insufficient robustness due to the use of single models and others. This paper circumvents these limitations by proposing a hybrid of ensemble methods with switching methods. The proposed method first implements a switching Kalman filter (SKF) to classify between various linear degradation phases, then predict the future propagation of fault dimension using appropriate Kalman filters for each phase. This proposed method achieves both continuous and discrete prediction values representing the remaining life and degradation phase of the system, respectively. The proposed framework is shown via a case study on benchmark simulated aeroengine data sets. The evaluation of the proposed framework shows that the proposed method achieves better accuracy and robustness against noise compared with other methods reported in the literature. The results also indicate the effectiveness of the SKF in detecting the switching point between various degradation modes.
Statistical Process Control of a Kalman Filter Model
Gamse, Sonja; Nobakht-Ersi, Fereydoun; Sharifi, Mohammad A.
2014-01-01
For the evaluation of measurement data, different functional and stochastic models can be used. In the case of time series, a Kalman filtering (KF) algorithm can be implemented. In this case, a very well-known stochastic model, which includes statistical tests in the domain of measurements and in the system state domain, is used. Because the output results depend strongly on input model parameters and the normal distribution of residuals is not always fulfilled, it is very important to perform all possible tests on output results. In this contribution, we give a detailed description of the evaluation of the Kalman filter model. We describe indicators of inner confidence, such as controllability and observability, the determinant of state transition matrix and observing the properties of the a posteriori system state covariance matrix and the properties of the Kalman gain matrix. The statistical tests include the convergence of standard deviations of the system state components and normal distribution beside standard tests. Especially, computing controllability and observability matrices and controlling the normal distribution of residuals are not the standard procedures in the implementation of KF. Practical implementation is done on geodetic kinematic observations. PMID:25264959
Statistical Process Control of a Kalman Filter Model
Directory of Open Access Journals (Sweden)
Sonja Gamse
2014-09-01
Full Text Available For the evaluation of measurement data, different functional and stochastic models can be used. In the case of time series, a Kalman filtering (KF algorithm can be implemented. In this case, a very well-known stochastic model, which includes statistical tests in the domain of measurements and in the system state domain, is used. Because the output results depend strongly on input model parameters and the normal distribution of residuals is not always fulfilled, it is very important to perform all possible tests on output results. In this contribution, we give a detailed description of the evaluation of the Kalman filter model. We describe indicators of inner confidence, such as controllability and observability, the determinant of state transition matrix and observing the properties of the a posteriori system state covariance matrix and the properties of the Kalman gain matrix. The statistical tests include the convergence of standard deviations of the system state components and normal distribution beside standard tests. Especially, computing controllability and observability matrices and controlling the normal distribution of residuals are not the standard procedures in the implementation of KF. Practical implementation is done on geodetic kinematic observations.
Statistical process control of a Kalman filter model.
Gamse, Sonja; Nobakht-Ersi, Fereydoun; Sharifi, Mohammad A
2014-09-26
For the evaluation of measurement data, different functional and stochastic models can be used. In the case of time series, a Kalman filtering (KF) algorithm can be implemented. In this case, a very well-known stochastic model, which includes statistical tests in the domain of measurements and in the system state domain, is used. Because the output results depend strongly on input model parameters and the normal distribution of residuals is not always fulfilled, it is very important to perform all possible tests on output results. In this contribution, we give a detailed description of the evaluation of the Kalman filter model. We describe indicators of inner confidence, such as controllability and observability, the determinant of state transition matrix and observing the properties of the a posteriori system state covariance matrix and the properties of the Kalman gain matrix. The statistical tests include the convergence of standard deviations of the system state components and normal distribution beside standard tests. Especially, computing controllability and observability matrices and controlling the normal distribution of residuals are not the standard procedures in the implementation of KF. Practical implementation is done on geodetic kinematic observations.
Application of Extended Kalman Filter to Tactical Ballistic Missile Re-entry Problem
Bhowmik, Subrata
2007-01-01
The objective is to investigate the advantages and performance of Extended Kalman Filter for the estimation of non-linear system where linearization takes place about a trajectory that was continually updated with the state estimates resulting from the measurement. Here tactile ballistic missile Re-entry problem is taken as a nonlinear system model and Extended Kalman Filter technique is used to estimate the positions and velocities at the X and Y direction at different values of ballistic coefficients. The result shows that the method gives better estimation with the increase of ballistic coefficient.
Particle Kalman Filtering: A Nonlinear Bayesian Framework for Ensemble Kalman Filters*
Hoteit, Ibrahim
2012-02-01
This paper investigates an approximation scheme of the optimal nonlinear Bayesian filter based on the Gaussian mixture representation of the state probability distribution function. The resulting filter is similar to the particle filter, but is different from it in that the standard weight-type correction in the particle filter is complemented by the Kalman-type correction with the associated covariance matrices in the Gaussian mixture. The authors show that this filter is an algorithm in between the Kalman filter and the particle filter, and therefore is referred to as the particle Kalman filter (PKF). In the PKF, the solution of a nonlinear filtering problem is expressed as the weighted average of an “ensemble of Kalman filters” operating in parallel. Running an ensemble of Kalman filters is, however, computationally prohibitive for realistic atmospheric and oceanic data assimilation problems. For this reason, the authors consider the construction of the PKF through an “ensemble” of ensemble Kalman filters (EnKFs) instead, and call the implementation the particle EnKF (PEnKF). It is shown that different types of the EnKFs can be considered as special cases of the PEnKF. Similar to the situation in the particle filter, the authors also introduce a resampling step to the PEnKF in order to reduce the risk of weights collapse and improve the performance of the filter. Numerical experiments with the strongly nonlinear Lorenz-96 model are presented and discussed.
Radio Channel State Prediction by Kalman Filter
Directory of Open Access Journals (Sweden)
Peter Ziacik
2005-01-01
Full Text Available In this article there is the description Kalman filter using as a radio channel state predictor. Simulator of prediction has been created in MATLAB environment and it is capable to simulate the prediction of radio signal envelope by Clark’s model of radio channel, which is implemented to the simulator. Simulations were realized for prediction range 0.41 ms and 6.24 ms and as comparing criterion we used the prediction error. It is clear from simulations, that with the duration of prediction the prediction error is enlarging, which may cause the erroneous decision of adaptation algorithms.
Skew redundant MEMS IMU calibration using a Kalman filter
Jafari, M.; Sahebjameyan, M.; Moshiri, B.; Najafabadi, T. A.
2015-10-01
In this paper, a novel calibration procedure for skew redundant inertial measurement units (SRIMUs) based on micro-electro mechanical systems (MEMS) is proposed. A general model of the SRIMU measurements is derived which contains the effects of bias, scale factor error and misalignments. For more accuracy, the effect of lever arms of the accelerometers to the center of the table are modeled and compensated in the calibration procedure. Two separate Kalman filters (KFs) are proposed to perform the estimation of error parameters for gyroscopes and accelerometers. The predictive error minimization (PEM) stochastic modeling method is used to simultaneously model the effect of bias instability and random walk noise on the calibration Kalman filters to diminish the biased estimations. The proposed procedure is simulated numerically and has expected experimental results. The calibration maneuvers are applied using a two-axis angle turntable in a way that the persistency of excitation (PE) condition for parameter estimation is met. For this purpose, a trapezoidal calibration profile is utilized to excite different deterministic error parameters of the accelerometers and a pulse profile is used for the gyroscopes. Furthermore, to evaluate the performance of the proposed KF calibration method, a conventional least squares (LS) calibration procedure is derived for the SRIMUs and the simulation and experimental results compare the functionality of the two proposed methods with each other.
Attitude Estimation Based on the Spherical Simplex Transformation Modified Unscented Kalman Filter
Directory of Open Access Journals (Sweden)
Jianwei Zhao
2014-01-01
Full Text Available An antenna attitude estimation algorithm is proposed to improve the antenna pointing accuracy for the satellite communication on-the-move. The extrapolated angular acceleration is adopted to improve the performance of the time response. The states of the system are modified according to the modification rules. The spherical simplex transformation unscented Kalman filter is used to improve the precision of the estimated attitude and decrease the calculation of the unscented Kalman filter. The experiment results show that the proposed algorithm can improve the instantaneity of the estimated attitude and the precision of the antenna pointing, which meets the requirement of the antenna pointing.
DEFF Research Database (Denmark)
Pierobon, Leonardo; Schlanbusch, Rune; Kandepu, Rambabu
2014-01-01
for this project. Considering the plant dynamics, it is of paramount importance to monitor the peak temperatures within the once-through boiler serving the bottoming unit to prevent the decomposition of the working fluid. This paper accordingly aims at applying the unscented Kalman filter to estimate...... the temperature distribution inside the primary heat exchanger by engaging a detailed and distributed model of the system and available measurements. Simulation results prove the robustness of the unscented Kalman filter with respect to process noise, measurement disturbances and initial conditions....
Penggunaan Extended Kalman Filter Sebagai Estimator Sikap pada Sistem Kendali Servo Visual Robot
Directory of Open Access Journals (Sweden)
Noor Cholis Basjaruddin
2012-03-01
Full Text Available Extended Kalman Filter (EKF is the non-linear version of Kalman filter and the said filter is usually used in nonlinear state estimation. In this study EKF is applied to process the image features of a single camera mounted on the end effector of a robot. Data generated by the EKF then is to be processed to obtain the motion parameters. Simulation of visual servo control system was built with the aim to examine the use of the EKF as a pose estimator. The simulation results using Matlab show that the EKF is able to well estimate the robot pose.
Penggunaan Extended Kalman Filter Sebagai Estimator Sikap pada Sistem Kendali Servo Visual Robot
Noor Cholis Basjaruddin
2012-01-01
Extended Kalman Filter (EKF) is the non-linear version of Kalman filter and the said filter is usually used in nonlinear state estimation. In this study EKF is applied to process the image features of a single camera mounted on the end effector of a robot. Data generated by the EKF then is to be processed to obtain the motion parameters. Simulation of visual servo control system was built with the aim to examine the use of the EKF as a pose estimator. The simulation results using Matlab show ...
An Extended Kalman Filter with a Computed Mean Square Error Bound
Hexner, Gyorgy; Weiss, Haim
2014-01-01
The paper proposes a new recursive filter for non-linear systems that inherently computes a valid bound on the mean square estimation error. The proposed filter, bound based extended Kalman, (BEKF) is in the form of an extended Kalman filter. The main difference of the proposed filter from the conventional extended Kalman filter is in the use of a computed mean square error bound matrix, to calculate the filter gain, and to serve as bound on the actual mean square error. The paper shows that ...
Institute of Scientific and Technical Information of China (English)
FENG Bo; MA Hong-Bin; FU Meng-Yin; WANG Shun-Ting
2013-01-01
Kalman filtering techniques have been widely used in many applications,however,standard Kalman filters for linear Gaussian systems usually cannot work well or even diverge in the presence of large model uncertainty.In practical applications,it is expensive to have large number of high-cost experiments or even impossible to obtain an exact system model.Motivated by our previous pioneering work on finite-model adaptive control,a framework of finite-model Kalman filtering is introduced in this paper.This framework presumes that large model uncertainty may be restricted by a finite set of known models which can be very different from each other.Moreover,the number of known models in the set can be flexibly chosen so that the uncertain model may always be approximated by one of the known models,in other words,the large model uncertainty is "covered" by the "convex hull" of the known models.Within the presented framework according to the idea of adaptive switching via the minimizing vector distance principle,a simple finite-model Kalman filter,MVDP-FMKF,is mathematically formulated and illustrated by extensive simulations.An experiment of MEMS gyroscope drift has verified the effectiveness of the proposed algorithm,indicating that the mechanism of finite-model Kalman filter is useful and efficient in practical applications of Kalman filters,especially in inertial navigation systems.
Deterministic Mean-Field Ensemble Kalman Filtering
Law, Kody J. H.
2016-05-03
The proof of convergence of the standard ensemble Kalman filter (EnKF) from Le Gland, Monbet, and Tran [Large sample asymptotics for the ensemble Kalman filter, in The Oxford Handbook of Nonlinear Filtering, Oxford University Press, Oxford, UK, 2011, pp. 598--631] is extended to non-Gaussian state-space models. A density-based deterministic approximation of the mean-field limit EnKF (DMFEnKF) is proposed, consisting of a PDE solver and a quadrature rule. Given a certain minimal order of convergence k between the two, this extends to the deterministic filter approximation, which is therefore asymptotically superior to standard EnKF for dimension d<2k. The fidelity of approximation of the true distribution is also established using an extension of the total variation metric to random measures. This is limited by a Gaussian bias term arising from nonlinearity/non-Gaussianity of the model, which arises in both deterministic and standard EnKF. Numerical results support and extend the theory.
Rucci, Michael; Hardie, Russell C; Barnard, Kenneth J
2014-05-01
In this paper, we present a computationally efficient video restoration algorithm to address both blur and noise for a Nyquist sampled imaging system. The proposed method utilizes a temporal Kalman filter followed by a correlation-model based spatial adaptive Wiener filter (AWF). The Kalman filter employs an affine background motion model and novel process-noise variance estimate. We also propose and demonstrate a new multidelay temporal Kalman filter designed to more robustly treat local motion. The AWF is a spatial operation that performs deconvolution and adapts to the spatially varying residual noise left in the Kalman filter stage. In image areas where the temporal Kalman filter is able to provide significant noise reduction, the AWF can be aggressive in its deconvolution. In other areas, where less noise reduction is achieved with the Kalman filter, the AWF balances the deconvolution with spatial noise reduction. In this way, the Kalman filter and AWF work together effectively, but without the computational burden of full joint spatiotemporal processing. We also propose a novel hybrid system that combines a temporal Kalman filter and BM3D processing. To illustrate the efficacy of the proposed methods, we test the algorithms on both simulated imagery and video collected with a visible camera.
An iterative ensemble Kalman filter for reservoir engineering applications
Krymskaya, M.V.; Hanea, R.G.; Verlaan, M.
2009-01-01
The study has been focused on examining the usage and the applicability of ensemble Kalman filtering techniques to the history matching procedures. The ensemble Kalman filter (EnKF) is often applied nowadays to solving such a problem. Meanwhile, traditional EnKF requires assumption of the
An iterative ensemble Kalman filter for reservoir engineering applications
Krymskaya, M.V.; Hanea, R.G.; Verlaan, M.
2009-01-01
The study has been focused on examining the usage and the applicability of ensemble Kalman filtering techniques to the history matching procedures. The ensemble Kalman filter (EnKF) is often applied nowadays to solving such a problem. Meanwhile, traditional EnKF requires assumption of the distributi
Ensemble-based Kalman Filters in Strongly Nonlinear Dynamics
Institute of Scientific and Technical Information of China (English)
Zhaoxia PU; Joshua HACKER
2009-01-01
This study examines the effectiveness of ensemble Kalman filters in data assimilation with the strongly nonlinear dynamics of the Lorenz-63 model, and in particular their use in predicting the regime transition that occurs when the model jumps from one basin of attraction to the other. Four configurations of the ensemble-based Kalman filtering data assimilation techniques, including the ensemble Kalman filter, ensemble adjustment Kalman filter, ensemble square root filter and ensemble transform Kalman filter, are evaluated with their ability in predicting the regime transition (also called phase transition) and also are compared in terms of their sensitivity to both observational and sampling errors. The sensitivity of each ensemble-based filter to the size of the ensemble is also examined.
DEFF Research Database (Denmark)
Larsen, Thomas Dall; Bak, Martin; Andersen, Nils Axel
1998-01-01
A Kalman filter using encoder readings as inputs and vision measurements as observations is designed as a location estimator for an autonomously guided vehicle (AGV). To reduce the effect of modelling errors an augmented filter that estimates the true system parameters is designed. The traditional...
Modeling of HVDC in Dynamic State Estimation Using Unscented Kalman Filter Method
DEFF Research Database (Denmark)
Khazraj, Hesam; Silva, Filipe Miguel Faria da; Bak, Claus Leth
2016-01-01
HVDC transmission is an integral part of various power system networks. This article presents an Unscented Kalman Filter dynamic state estimator algorithm that considers the presence of HVDC links. The AC - DC power flow analysis, which is implemented as power flow solver for Dynamic State...
Alternate approach for terrain-aided navigation using parallel extended Kalman filters
Energy Technology Data Exchange (ETDEWEB)
Sheives, T.C.; Andreas, R.D.
1979-12-01
A new approach for applying SITAN (Sandia Inertial Terrain Aided Navigation) to applications involving large initial position errors is described and analyzed. The approach uses parallel Kalman filters in combination with a selection algorithm to estimate the errors in the reference navigation system. Monte Carlo simulation and covariance analysis results are presented which demonstrate the feasibility and practicality of the approach.
Rigatos, Gerasimos G; Rigatou, Efthymia G; Djida, Jean Daniel
2015-10-01
A method for early diagnosis of parametric changes in intracellular protein synthesis models (e.g. the p53 protein - mdm2 inhibitor model) is developed with the use of a nonlinear Kalman Filtering approach (Derivative-free nonlinear Kalman Filter) and of statistical change detection methods. The intracellular protein synthesis dynamic model is described by a set of coupled nonlinear differential equations. It is shown that such a dynamical system satisfies differential flatness properties and this allows to transform it, through a change of variables (diffeomorphism), to the so-called linear canonical form. For the linearized equivalent of the dynamical system, state estimation can be performed using the Kalman Filter recursion. Moreover, by applying an inverse transformation based on the previous diffeomorphism it becomes also possible to obtain estimates of the state variables of the initial nonlinear model. By comparing the output of the Kalman Filter (which is assumed to correspond to the undistorted dynamical model) with measurements obtained from the monitored protein synthesis system, a sequence of differences (residuals) is obtained. The statistical processing of the residuals with the use of x2 change detection tests, can provide indication within specific confidence intervals about parametric changes in the considered biological system and consequently indications about the appearance of specific diseases (e.g. malignancies).
Institute of Scientific and Technical Information of China (English)
王其; 徐晓苏
2007-01-01
To improve the navigation accuracy of an autonomous underwater vehicle (AUV), a novel terrain passive integrated navigation system (TPINS) is presented. According to the characteristics of the underwater environment and AUV navigation requirements of low cost and high accuracy, a novel TPINS is designed with a configuration of the strapdown inertial navigation system (SINS), the terrain reference navigation system (TRNS), the Doppler velocity sonar (DVS), the magnetic compass and the navigation computer utilizing the unscented Kalman filter (UKF) to fuse the navigation information from various navigation sensors. Linear filter equations for the extended Kalman filter (EKF), nonlinear filter equations for the UKF and measurement equations of navigation sensors are addressed. It is indicated from the comparable simulation experiments of the EKF and the UKF that AUV navigation precision is improved substantially with the proposed sensors and the UKF when compared to the EKF. The TPINS designed with the proposed sensors and the UKF is effective in reducing AUV navigation position errors and improving the stability and precision of the AUV underwater integrated navigation.%为了提高自主水下航行器的导航精度,提出了一种新型地形无源组合导航系统.根据水下环境特点和航行器导航高精度和低成本的要求,采用捷联式惯性导航系统、地形辅助导航系统、多普勒速度声纳、电子磁罗经和利用UKF进行信息融合的导航计算机组成新型水下地形无源组合导航系统,并给出了EKF线性滤波方程、UKF非线性滤波方程和导航传感器量测方程.对比仿真实验表明,采用建议的传感器和UKF信息融合方式比采用EKF方式提高了水下航行器导航定位的精度.采用不同的导航传感器和UKF信息融合方法的地形无源组合导航系统可以有效地减小水下航行器导航位置误差,提高组合导航的稳定性和精度.
Target Centroid Position Estimation of Phase-Path Volume Kalman Filtering
Directory of Open Access Journals (Sweden)
Fengjun Hu
2016-01-01
Full Text Available For the problem of easily losing track target when obstacles appear in intelligent robot target tracking, this paper proposes a target tracking algorithm integrating reduced dimension optimal Kalman filtering algorithm based on phase-path volume integral with Camshift algorithm. After analyzing the defects of Camshift algorithm, compare the performance with the SIFT algorithm and Mean Shift algorithm, and Kalman filtering algorithm is used for fusion optimization aiming at the defects. Then aiming at the increasing amount of calculation in integrated algorithm, reduce dimension with the phase-path volume integral instead of the Gaussian integral in Kalman algorithm and reduce the number of sampling points in the filtering process without influencing the operational precision of the original algorithm. Finally set the target centroid position from the Camshift algorithm iteration as the observation value of the improved Kalman filtering algorithm to fix predictive value; thus to make optimal estimation of target centroid position and keep the target tracking so that the robot can understand the environmental scene and react in time correctly according to the changes. The experiments show that the improved algorithm proposed in this paper shows good performance in target tracking with obstructions and reduces the computational complexity of the algorithm through the dimension reduction.
Adaptive distributed Kalman filtering with wind estimation for astronomical adaptive optics.
Massioni, Paolo; Gilles, Luc; Ellerbroek, Brent
2015-12-01
In the framework of adaptive optics (AO) for astronomy, it is a common assumption to consider the atmospheric turbulent layers as "frozen flows" sliding according to the wind velocity profile. For this reason, having knowledge of such a velocity profile is beneficial in terms of AO control system performance. In this paper we show that it is possible to exploit the phase estimate from a Kalman filter running on an AO system in order to estimate wind velocity. This allows the update of the Kalman filter itself with such knowledge, making it adaptive. We have implemented such an adaptive controller based on the distributed version of the Kalman filter, for a realistic simulation of a multi-conjugate AO system with laser guide stars on a 30 m telescope. Simulation results show that this approach is effective and promising and the additional computational cost with respect to the distributed filter is negligible. Comparisons with a previously published slope detection and ranging wind profiler are made and the impact of turbulence profile quantization is assessed. One of the main findings of the paper is that all flavors of the adaptive distributed Kalman filter are impacted more significantly by turbulence profile quantization than the static minimum mean square estimator which does not incorporate wind profile information.
Institute of Scientific and Technical Information of China (English)
李佩娟; 徐晓苏; 张小飞
2011-01-01
为了避免现实环境的动态变化对水下航行器系统模型造成的随机干扰影响,保证水下航行器长时间导航精度的稳定性,提出了利用RBF神经网络辅助联邦Kalman滤波方法对SINS /TAN/ DVL/ MCP组合导航系统进行信息融合.给出了各子导航系统的误差模型,通过足够精度的样本对前向神经网络进行离线训练,建立神经网络控制模型.仿真结果表明,该方法可使水下航行器的系统状态在较短的时间内以较高的精度达到稳定.通过与联邦Kalman滤波结果对比表明,采用智能控制方法辅助的信息融合方式的导航定位精度提高了一倍,能有效提高常规联邦Kalman滤波器的自适应能力,达到减小误差,提高精度的目的.%In order to avoid the random effects of the underwater vehicle system model caused by the real dynamics of the environment, a RBF neural network aided federated Kalman filter is proposed to fuse the navigation information from various navigation sensors (such as SINS, TAN, DVL and MCP) to improve the navigation accuracy. Error models of navigation systems are proposed and a neural network model is set up via offline training with enough precise samples. Simulation experiments prove that the AUV navigation accuracy can attain high stability in a short period by the proposed method. By comparing the filtering results with the federated Kalman filter, it is shown that the proposed method can effectively improve the adaptivity, and the navigation precision is doubled.
基于 Kal man 滤波的人体心电跟踪监测系统设计%Design of human ECG monitoring system based on Kalman filter
Institute of Scientific and Technical Information of China (English)
刘俊杰; 柳桂国; 宋栓军
2016-01-01
Aimed at ECG health care for families ,and improving the accuracy of the low power monitoring ECG monitoring system ,an ECG monitoring system using Kalman filter is designed and implemented .The weak ECG signals are extracted by electrodes and ECG collecting line of three lead ,and then filtered and amplified through the analog front using AD8232 , then the STM32 processor is used for Kalman filter processing . At last , the actual ECG characteristics of biological electrical signals and heart rate are got in the LCD .Tested by the experimental prototype , under the condition of the human body being quiet ,the result in the LCD is clear and stable ,and can reflect the actual electrical characteristics of the human body .The results show that the design successfully completed the ECG signal filter processing ,can meet the needs of home ECG monitoring ,which means a certain reference value for family medical equipment .%针对家庭心电健康监护，以及提高低功耗心电监测系统监测的准确性，设计并实现了一种采用卡尔曼滤波的心电监测系统。该系统采用AD8232作为模拟前段对通过电极和三导联心电采集线提取的微弱心电信号进行滤波放大，再经STM32处理器进行卡尔曼滤波处理，最终在LCD得到清晰稳定的生物电信号及心率。经实验样机初步测试，在人体保持安静的情况下，LCD显示的心电信号清晰稳定，能够反映人体实际心电特征。结果表明该设计较好地完成了心电信号的滤波处理，能够满足家庭心电监测的需求，对于家庭医疗设备有一定参考价值。
Model Calibration of Exciter and PSS Using Extended Kalman Filter
Energy Technology Data Exchange (ETDEWEB)
Kalsi, Karanjit; Du, Pengwei; Huang, Zhenyu
2012-07-26
Power system modeling and controls continue to become more complex with the advent of smart grid technologies and large-scale deployment of renewable energy resources. As demonstrated in recent studies, inaccurate system models could lead to large-scale blackouts, thereby motivating the need for model calibration. Current methods of model calibration rely on manual tuning based on engineering experience, are time consuming and could yield inaccurate parameter estimates. In this paper, the Extended Kalman Filter (EKF) is used as a tool to calibrate exciter and Power System Stabilizer (PSS) models of a particular type of machine in the Western Electricity Coordinating Council (WECC). The EKF-based parameter estimation is a recursive prediction-correction process which uses the mismatch between simulation and measurement to adjust the model parameters at every time step. Numerical simulations using actual field test data demonstrate the effectiveness of the proposed approach in calibrating the parameters.
Two-level Robust Measurement Fusion Kalman Filter for Clustering Sensor Networks
Institute of Scientific and Technical Information of China (English)
ZHANG Peng; QI Wen-Juan; DENG Zi-Li
2014-01-01
This paper investigates the distributed fusion Kalman filtering over clustering sensor networks. The sensor network is partitioned as clusters by the nearest neighbor rule and each cluster consists of sensing nodes and cluster-head. Using the minimax robust estimation principle, based on the worst-case conservative system with the conservative upper bounds of noise variances, two-level robust measurement fusion Kalman filter is presented for the clustering sensor network systems with uncertain noise variances. It can significantly reduce the communication load and save energy when the number of sensors is very large. A Lyapunov equation approach for the robustness analysis is presented, by which the robustness of the local and fused Kalman filters is proved. The concept of the robust accuracy is presented, and the robust accuracy relations among the local and fused robust Kalman filters are proved. It is proved that the robust accuracy of the two-level weighted measurement fuser is equal to that of the global centralized robust fuser and is higher than those of each local robust filter and each local weighted measurement fuser. A simulation example shows the correctness and effectiveness of the proposed results.
GPS/UWB/MEMS-IMU tightly coupled navigation with improved robust Kalman filter
Li, Zengke; Chang, Guobin; Gao, Jingxiang; Wang, Jian; Hernandez, Alberto
2016-12-01
The integration of Global Positioning System (GPS) with Inertial Navigation System (INS) has been very intensively developed and widely applied in multiple areas. To further enhance the reliability and availability of GPS/INS integrated navigation in GPS challenging environment, range observation through ultra-wideband (UWB) is introduced in GPS/INS tightly coupled navigation. An improved robust Kalman filter is proposed and used to resist the influence of gross error from UWB observation in GPS/UWB/IMU tightly coupled navigation. The variance of the squared Mahalanobis distance in moving window is calculated, which brings as new judgement factor for gross errors in order to decrease the rate of false outlier identification. A simulation analysis shows that the improved robust Kalman filter is able to correctly identify gross errors and the rate of false judgment as zero. In order to validate the new robust filter, a real experiment is conducted. The results indicate that the improved robust Kalman filter used in GPS/UWB/INS tightly coupled navigation is able to remove the harmful effect of gross error in UWB observation. It clearly illustrates that the improved robust Kalman filter is very effective, and all the simulated small and large gross errors added to UWB distance observation are successfully identified.
Institute of Scientific and Technical Information of China (English)
王小旭; 梁彦; 潘泉; 赵春晖; 李汉舟
2012-01-01
Traditional unscented Kalman filter (UKF) calls for that noise should be Gaussian white one, and can not solve nonlinear filtering problem with colored noise. For this reason, a new UKF filtering algorithm with colored measurement noise is proposed. Firstly, optimal filtering framework for a class of nonlinear discrete-time systems with colored measurement noise is derived on the basis of augmented measurement information and minimum mean square error estimation. Secondly, filtering recursive formula of UKF with colored noise is proposed through applying unscented transformation (UT) to calculation the posterior mean and covariance of the nonlinear state in this optimal framework. The proposed UKF can effectively deal with the issue that traditional UKF is failure under the condition that measurement noise is colored. A numerical simulation example also shows its feasibility and effectiveness.%传统Unscented卡尔曼滤波器(Unscented Kalman filter,UKF)要求噪声必须为高斯白噪声,无法解决带有色噪声的非线性系统滤波问题.为此,本文提出了一种带有色量测噪声的UKF滤波新算法.首先,基于量测信息增广和最小方差估计,推导出一类带有色量测噪声的非线性离散系统状态的最优滤波框架,接着采用Unscented变换(Unscented transformation,UT)来计算最优框架中的非线性状态后验均值和协方差,进而得到有色量测噪声下UKF滤波递推公式.所设计的UKF新方法能有效地解决传统UKF在量测噪声有色情况下非线性滤波失效的问题,数值仿真实例验证了其可行性和有效性.
Kalman filtering to suppress spurious signals in Adaptive Optics control
Energy Technology Data Exchange (ETDEWEB)
Poyneer, L; Veran, J P
2010-03-29
In many scenarios, an Adaptive Optics (AO) control system operates in the presence of temporally non-white noise. We use a Kalman filter with a state space formulation that allows suppression of this colored noise, hence improving residual error over the case where the noise is assumed to be white. We demonstrate the effectiveness of this new filter in the case of the estimated Gemini Planet Imager tip-tilt environment, where there are both common-path and non-common path vibrations. We discuss how this same framework can also be used to suppress spatial aliasing during predictive wavefront control assuming frozen flow in a low-order AO system without a spatially filtered wavefront sensor, and present experimental measurements from Altair that clearly reveal these aliased components.
Kalman filtering to suppress spurious signals in Adaptive Optics control
Energy Technology Data Exchange (ETDEWEB)
Poyneer, L; Veran, J P
2010-03-29
In many scenarios, an Adaptive Optics (AO) control system operates in the presence of temporally non-white noise. We use a Kalman filter with a state space formulation that allows suppression of this colored noise, hence improving residual error over the case where the noise is assumed to be white. We demonstrate the effectiveness of this new filter in the case of the estimated Gemini Planet Imager tip-tilt environment, where there are both common-path and non-common path vibrations. We discuss how this same framework can also be used to suppress spatial aliasing during predictive wavefront control assuming frozen flow in a low-order AO system without a spatially filtered wavefront sensor, and present experimental measurements from Altair that clearly reveal these aliased components.
Energy Technology Data Exchange (ETDEWEB)
Lall, Pradeep; Wei, Junchao; Davis, J Lynn
2014-06-24
Abstract— Solid-state lighting (SSL) luminaires containing light emitting diodes (LEDs) have the potential of seeing excessive temperatures when being transported across country or being stored in non-climate controlled warehouses. They are also being used in outdoor applications in desert environments that see little or no humidity but will experience extremely high temperatures during the day. This makes it important to increase our understanding of what effects high temperature exposure for a prolonged period of time will have on the usability and survivability of these devices. Traditional light sources “burn out” at end-of-life. For an incandescent bulb, the lamp life is defined by B50 life. However, the LEDs have no filament to “burn”. The LEDs continually degrade and the light output decreases eventually below useful levels causing failure. Presently, the TM-21 test standard is used to predict the L70 life of LEDs from LM-80 test data. Several failure mechanisms may be active in a LED at a single time causing lumen depreciation. The underlying TM-21 Model may not capture the failure physics in presence of multiple failure mechanisms. Correlation of lumen maintenance with underlying physics of degradation at system-level is needed. In this paper, Kalman Filter (KF) and Extended Kalman Filters (EKF) have been used to develop a 70-percent Lumen Maintenance Life Prediction Model for LEDs used in SSL luminaires. Ten-thousand hour LM-80 test data for various LEDs have been used for model development. System state at each future time has been computed based on the state space at preceding time step, system dynamics matrix, control vector, control matrix, measurement matrix, measured vector, process noise and measurement noise. The future state of the lumen depreciation has been estimated based on a second order Kalman Filter model and a Bayesian Framework. Life prediction of L70 life for the LEDs used in SSL luminaires from KF and EKF based models have
Kalman filtering naturally accounts for visually guided and predictive smooth pursuit dynamics.
Orban de Xivry, Jean-Jacques; Coppe, Sébastien; Blohm, Gunnar; Lefèvre, Philippe
2013-10-30
The brain makes use of noisy sensory inputs to produce eye, head, or arm motion. In most instances, the brain combines this sensory information with predictions about future events. Here, we propose that Kalman filtering can account for the dynamics of both visually guided and predictive motor behaviors within one simple unifying mechanism. Our model relies on two Kalman filters: (1) one processing visual information about retinal input; and (2) one maintaining a dynamic internal memory of target motion. The outputs of both Kalman filters are then combined in a statistically optimal manner, i.e., weighted with respect to their reliability. The model was tested on data from several smooth pursuit experiments and reproduced all major characteristics of visually guided and predictive smooth pursuit. This contrasts with the common belief that anticipatory pursuit, pursuit maintenance during target blanking, and zero-lag pursuit of sinusoidally moving targets all result from different control systems. This is the first instance of a model integrating all aspects of pursuit dynamics within one coherent and simple model and without switching between different parallel mechanisms. Our model suggests that the brain circuitry generating a pursuit command might be simpler than previously believed and only implement the functional equivalents of two Kalman filters whose outputs are optimally combined. It provides a general framework of how the brain can combine continuous sensory information with a dynamic internal memory and transform it into motor commands.
Model-Based Engine Control Architecture with an Extended Kalman Filter
Csank, Jeffrey T.; Connolly, Joseph W.
2016-01-01
This paper discusses the design and implementation of an extended Kalman filter (EKF) for model-based engine control (MBEC). Previously proposed MBEC architectures feature an optimal tuner Kalman Filter (OTKF) to produce estimates of both unmeasured engine parameters and estimates for the health of the engine. The success of this approach relies on the accuracy of the linear model and the ability of the optimal tuner to update its tuner estimates based on only a few sensors. Advances in computer processing are making it possible to replace the piece-wise linear model, developed off-line, with an on-board nonlinear model running in real-time. This will reduce the estimation errors associated with the linearization process, and is typically referred to as an extended Kalman filter. The nonlinear extended Kalman filter approach is applied to the Commercial Modular Aero-Propulsion System Simulation 40,000 (C-MAPSS40k) and compared to the previously proposed MBEC architecture. The results show that the EKF reduces the estimation error, especially during transient operation.
Unscented Kalman Filter Applied to the Spacecraft Attitude Estimation with Euler Angles
Directory of Open Access Journals (Sweden)
Roberta Veloso Garcia
2012-01-01
Full Text Available The aim of this work is to test an algorithm to estimate, in real time, the attitude of an artificial satellite using real data supplied by attitude sensors that are on board of the CBERS-2 satellite (China Brazil Earth Resources Satellite. The real-time estimator used in this work for attitude determination is the Unscented Kalman Filter. This filter is a new alternative to the extended Kalman filter usually applied to the estimation and control problems of attitude and orbit. This algorithm is capable of carrying out estimation of the states of nonlinear systems, without the necessity of linearization of the nonlinear functions present in the model. This estimation is possible due to a transformation that generates a set of vectors that, suffering a nonlinear transformation, preserves the same mean and covariance of the random variables before the transformation. The performance will be evaluated and analyzed through the comparison between the Unscented Kalman filter and the extended Kalman filter results, by using real onboard data.
Unscented Kalman Filter-Trained Neural Networks for Slip Model Prediction.
Li, Zhencai; Wang, Yang; Liu, Zhen
2016-01-01
The purpose of this work is to investigate the accurate trajectory tracking control of a wheeled mobile robot (WMR) based on the slip model prediction. Generally, a nonholonomic WMR may increase the slippage risk, when traveling on outdoor unstructured terrain (such as longitudinal and lateral slippage of wheels). In order to control a WMR stably and accurately under the effect of slippage, an unscented Kalman filter and neural networks (NNs) are applied to estimate the slip model in real time. This method exploits the model approximating capabilities of nonlinear state-space NN, and the unscented Kalman filter is used to train NN's weights online. The slip parameters can be estimated and used to predict the time series of deviation velocity, which can be used to compensate control inputs of a WMR. The results of numerical simulation show that the desired trajectory tracking control can be performed by predicting the nonlinear slip model.
Application of Kalman Filtering Techniques for Microseismic Event Detection
Baziw, E.; Weir-Jones, I.
- Microseismic monitoring systems are generally installed in areas of induced seismicity caused by human activity. Induced seismicity results from changes in the state of stress which may occur as a result of excavation within the rock mass in mining (i.e., rockbursts), and changes in hydrostatic pressures and rock temperatures (e.g., during fluid injection or extraction) in oil exploitation, dam construction or fluid disposal. Microseismic monitoring systems determine event locations and important source parameters such as attenuation, seismic moment, source radius, static stress drop, peak particle velocity and seismic energy. An essential part of the operation of a microseismic monitoring system is the reliable detection of microseismic events. In the absence of reliable, automated picking techniques, operators rely upon manual picking. This is time-consuming, costly and, in the presence of background noise, very prone to error. The techniques described in this paper not only permit the reliable identification of events in cluttered signal environments they have also enabled the authors to develop reliable automated event picking procedures. This opens the way to use microseismic monitoring as a cost-effective production/operations procedure. It has been the experience of the authors that in certain noisy environments, the seismic monitoring system may trigger on and subsequently acquire substantial quantities of erroneous data, due to the high energy content of the ambient noise. Digital filtering techniques need to be applied on the microseismic data so that the ambient noise is removed and event detection simplified. The monitoring of seismic acoustic emissions is a continuous, real-time process and it is desirable to implement digital filters which can also be designed in the time domain and in real-time such as the Kalman Filter. This paper presents a real-time Kalman Filter which removes the statistically describable background noise from the recorded
Kalman Filter for Mass Property and Thrust Identification (MMS)
Queen, Steven
2015-01-01
The Magnetospheric Multiscale (MMS) mission consists of four identically instrumented, spin-stabilized observatories, elliptically orbiting the Earth in a tetrahedron formation. For the operational success of the mission, on-board systems must be able to deliver high-precision orbital adjustment maneuvers. On MMS, this is accomplished using feedback from on-board star sensors in tandem with accelerometers whose measurements are dynamically corrected for errors associated with a spinning platform. In order to determine the required corrections to the measured acceleration, precise estimates of attitude, rate, and mass-properties is necessary. To this end, both an on-board and ground-based Multiplicative Extended Kalman Filter (MEKF) were formulated and implemented in order to estimate the dynamic and quasi-static properties of the spacecraft.
Reservoir History Matching Using Ensemble Kalman Filters with Anamorphosis Transforms
Aman, Beshir M.
2012-12-01
This work aims to enhance the Ensemble Kalman Filter performance by transforming the non-Gaussian state variables into Gaussian variables to be a step closer to optimality. This is done by using univariate and multivariate Box-Cox transformation. Some History matching methods such as Kalman filter, particle filter and the ensemble Kalman filter are reviewed and applied to a test case in the reservoir application. The key idea is to apply the transformation before the update step and then transform back after applying the Kalman correction. In general, the results of the multivariate method was promising, despite the fact it over-estimated some variables.
A Comparative Analysis of Kalman Filters Using a Hypervelocity Missile Simulation.
1981-12-01
qoa.1.ity TIT " 5 1oth expehns[V, ,,! bulky. Y i 3.1.3 Obst , rv;dmility. For .n ;roposed model, ohservability was a .jkey IS,,. IO b, cuapl,.etily...Patterson AFB, 1980. 15. Wors]ey, William I., Comparison of Three Extended Kalman Filters for Air-to-Air Tracking. M.S. thesis. right-Patterson Air Force
Robust recovery of human motion from video using Kalman filters and virtual humans.
Cerveri, P; Pedotti, A; Ferrigno, G
2003-08-01
In sport science, as in clinical gait analysis, optoelectronic motion capture systems based on passive markers are widely used to recover human movement. By processing the corresponding image points, as recorded by multiple cameras, the human kinematics is resolved through multistage processing involving spatial reconstruction, trajectory tracking, joint angle determination, and derivative computation. Key problems with this approach are that marker data can be indistinct, occluded or missing from certain cameras, that phantom markers may be present, and that both 3D reconstruction and tracking may fail. In this paper, we present a novel technique, based on state space filters, that directly estimates the kinematical variables of a virtual mannequin (biomechanical model) from 2D measurements, that is, without requiring 3D reconstruction and tracking. Using Kalman filters, the configuration of the model in terms of joint angles, first and second order derivatives is automatically updated in order to minimize the distances, as measured on TV-cameras, between the 2D measured markers placed on the subject and the corresponding back-projected virtual markers located on the model. The Jacobian and Hessian matrices of the nonlinear observation function are computed through a multidimensional extension of Stirling's interpolation formula. Extensive experiments on simulated and real data confirmed the reliability of the developed system that is robust against false matching and severe marker occlusions. In addition, we show how the proposed technique can be extended to account for skin artifacts and model inaccuracy.
Star-sensor-based predictive Kalman filter for satelliteattitude estimation
Institute of Scientific and Technical Information of China (English)
林玉荣; 邓正隆
2002-01-01
A real-time attitude estimation algorithm, namely the predictive Kalman filter, is presented. This algorithm can accurately estimate the three-axis attitude of a satellite using only star sensor measurements. The implementation of the filter includes two steps: first, predicting the torque modeling error, and then estimating the attitude. Simulation results indicate that the predictive Kalman filter provides robust performance in the presence of both significant errors in the assumed model and in the initial conditions.
On sequential observation processing in localized ensemble Kalman filters
Nerger, Lars
2014-01-01
The different variants of current ensemble square-root Kalman filters assimilate either all observations at once or perform a sequence in which batches of observations or each single observation is assimilated. The sequential observation processing is used in filter algorithms like the ensemble adjustment Kalman filter (EAKF) and the ensemble square-root filter (EnSRF) and can result in computationally efficient algorithms because matrix inversions in the observation space are reduced to the ...
Takahashi, Kazuhiko; Naemura, Masahide
2005-12-01
This paper proposes a human body posture estimation method based on analysis of human silhouette and Kalman filter. The proposed method is based on both the heuristically extraction method of estimating the significant points of human body and the contour analysis of the human silhouette. The 2D coordinates of the human body's significant points, such as top of the head, and tips of feet, are located by applying the heuristically extraction method to the human silhouette, those of tips of hands are obtained by using the result of the contour analysis, and the joints of elbows and knees are estimated by introducing some heuristic rules to the contour image of the human silhouette. The estimated results are optimized and tracked by using Kalman filter. The proposed estimation method is implemented on a personal computer and runs in real-time. Experimental results show both the feasibility and the effectiveness of the proposed method for estimating human body postures.
Kinematic landslide monitoring with Kalman filtering
Directory of Open Access Journals (Sweden)
M. Acar
2008-03-01
Full Text Available Landslides are serious geologic disasters that threat human life and property in every country. In addition, landslides are one of the most important natural phenomena, which directly or indirectly affect countries' economy. Turkey is also the country that is under the threat of landslides. Landslides frequently occur in all of the Black Sea region as well as in many parts of Marmara, East Anatolia, and Mediterranean regions. Since these landslides resulted in destruction, they are ranked as the second important natural phenomenon that comes after earthquake in Turkey. In recent years several landslides happened after heavy rains and the resulting floods. This makes the landslide monitoring and mitigation techniques an important study subject for the related professional disciplines in Turkey. The investigations on surface deformations are conducted to define the boundaries of the landslide, size, level of activity and direction(s of the movement, and to determine individual moving blocks of the main slide.
This study focuses on the use of a kinematic deformation analysis based on Kalman Filtering at a landslide area near Istanbul. Kinematic deformation analysis has been applied in a landslide area, which is located to the north of Istanbul city. Positional data were collected using GPS technique. As part of the study, conventional static deformation analysis methodology has also been applied on the same data. The results and comparisons are discussed in this paper.
Multivariate localization methods for ensemble Kalman filtering
Roh, S.
2015-05-08
In ensemble Kalman filtering (EnKF), the small number of ensemble members that is feasible to use in a practical data assimilation application leads to sampling variability of the estimates of the background error covariances. The standard approach to reducing the effects of this sampling variability, which has also been found to be highly efficient in improving the performance of EnKF, is the localization of the estimates of the covariances. One family of localization techniques is based on taking the Schur (entry-wise) product of the ensemble-based sample covariance matrix and a correlation matrix whose entries are obtained by the discretization of a distance-dependent correlation function. While the proper definition of the localization function for a single state variable has been extensively investigated, a rigorous definition of the localization function for multiple state variables has been seldom considered. This paper introduces two strategies for the construction of localization functions for multiple state variables. The proposed localization functions are tested by assimilating simulated observations experiments into the bivariate Lorenz 95 model with their help.
Multivariate localization methods for ensemble Kalman filtering
Roh, S.
2015-12-03
In ensemble Kalman filtering (EnKF), the small number of ensemble members that is feasible to use in a practical data assimilation application leads to sampling variability of the estimates of the background error covariances. The standard approach to reducing the effects of this sampling variability, which has also been found to be highly efficient in improving the performance of EnKF, is the localization of the estimates of the covariances. One family of localization techniques is based on taking the Schur (element-wise) product of the ensemble-based sample covariance matrix and a correlation matrix whose entries are obtained by the discretization of a distance-dependent correlation function. While the proper definition of the localization function for a single state variable has been extensively investigated, a rigorous definition of the localization function for multiple state variables that exist at the same locations has been seldom considered. This paper introduces two strategies for the construction of localization functions for multiple state variables. The proposed localization functions are tested by assimilating simulated observations experiments into the bivariate Lorenz 95 model with their help.
Multivariate localization methods for ensemble Kalman filtering
Directory of Open Access Journals (Sweden)
S. Roh
2015-05-01
Full Text Available In ensemble Kalman filtering (EnKF, the small number of ensemble members that is feasible to use in a practical data assimilation application leads to sampling variability of the estimates of the background error covariances. The standard approach to reducing the effects of this sampling variability, which has also been found to be highly efficient in improving the performance of EnKF, is the localization of the estimates of the covariances. One family of localization techniques is based on taking the Schur (entry-wise product of the ensemble-based sample covariance matrix and a correlation matrix whose entries are obtained by the discretization of a distance-dependent correlation function. While the proper definition of the localization function for a single state variable has been extensively investigated, a rigorous definition of the localization function for multiple state variables has been seldom considered. This paper introduces two strategies for the construction of localization functions for multiple state variables. The proposed localization functions are tested by assimilating simulated observations experiments into the bivariate Lorenz 95 model with their help.
Kalman Filter for Spinning Spacecraft Attitude Estimation
Markley, F. Landis; Sedlak, Joseph E.
2008-01-01
This paper presents a Kalman filter using a seven-component attitude state vector comprising the angular momentum components in an inertial reference frame, the angular momentum components in the body frame, and a rotation angle. The relatively slow variation of these parameters makes this parameterization advantageous for spinning spacecraft attitude estimation. The filter accounts for the constraint that the magnitude of the angular momentum vector is the same in the inertial and body frames by employing a reduced six-component error state. Four variants of the filter, defined by different choices for the reduced error state, are tested against a quaternion-based filter using simulated data for the THEMIS mission. Three of these variants choose three of the components of the error state to be the infinitesimal attitude error angles, facilitating the computation of measurement sensitivity matrices and causing the usual 3x3 attitude covariance matrix to be a submatrix of the 6x6 covariance of the error state. These variants differ in their choice for the other three components of the error state. The variant employing the infinitesimal attitude error angles and the angular momentum components in an inertial reference frame as the error state shows the best combination of robustness and efficiency in the simulations. Attitude estimation results using THEMIS flight data are also presented.
Ensemble Kalman filtering with residual nudging
Luo, Xiaodong; 10.3402/tellusa.v64i0.17130
2012-01-01
Covariance inflation and localization are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF) by (in effect) adjusting the sample covariances of the estimates in the state space. In this work an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/o...
Multivariate localization methods for ensemble Kalman filtering
Roh, S.; Jun, M.; Szunyogh, I.; Genton, M. G.
2015-12-01
In ensemble Kalman filtering (EnKF), the small number of ensemble members that is feasible to use in a practical data assimilation application leads to sampling variability of the estimates of the background error covariances. The standard approach to reducing the effects of this sampling variability, which has also been found to be highly efficient in improving the performance of EnKF, is the localization of the estimates of the covariances. One family of localization techniques is based on taking the Schur (element-wise) product of the ensemble-based sample covariance matrix and a correlation matrix whose entries are obtained by the discretization of a distance-dependent correlation function. While the proper definition of the localization function for a single state variable has been extensively investigated, a rigorous definition of the localization function for multiple state variables that exist at the same locations has been seldom considered. This paper introduces two strategies for the construction of localization functions for multiple state variables. The proposed localization functions are tested by assimilating simulated observations experiments into the bivariate Lorenz 95 model with their help.
Ensemble Kalman filtering with residual nudging
Directory of Open Access Journals (Sweden)
Xiaodong Luo
2012-10-01
Full Text Available Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF by (in effect adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.
Ensemble Kalman filtering with residual nudging
Luo, X.
2012-10-03
Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF) by (in effect) adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.
Real-Time Diagnosis of Faults Using a Bank of Kalman Filters
Kobayashi, Takahisa; Simon, Donald L.
2006-01-01
A new robust method of automated real-time diagnosis of faults in an aircraft engine or a similar complex system involves the use of a bank of Kalman filters. In order to be highly reliable, a diagnostic system must be designed to account for the numerous failure conditions that an aircraft engine may encounter in operation. The method achieves this objective though the utilization of multiple Kalman filters, each of which is uniquely designed based on a specific failure hypothesis. A fault-detection-and-isolation (FDI) system, developed based on this method, is able to isolate faults in sensors and actuators while detecting component faults (abrupt degradation in engine component performance). By affording a capability for real-time identification of minor faults before they grow into major ones, the method promises to enhance safety and reduce operating costs. The robustness of this method is further enhanced by incorporating information regarding the aging condition of an engine. In general, real-time fault diagnostic methods use the nominal performance of a "healthy" new engine as a reference condition in the diagnostic process. Such an approach does not account for gradual changes in performance associated with aging of an otherwise healthy engine. By incorporating information on gradual, aging-related changes, the new method makes it possible to retain at least some of the sensitivity and accuracy needed to detect incipient faults while preventing false alarms that could result from erroneous interpretation of symptoms of aging as symptoms of failures. The figure schematically depicts an FDI system according to the new method. The FDI system is integrated with an engine, from which it accepts two sets of input signals: sensor readings and actuator commands. Two main parts of the FDI system are a bank of Kalman filters and a subsystem that implements FDI decision rules. Each Kalman filter is designed to detect a specific sensor or actuator fault. When a sensor
Institute of Scientific and Technical Information of China (English)
卢恒惠; 张盛; 汪浩; 林孝康
2011-01-01
Since the global positioning system (GPS) is unavailable in dense urban environments, tunnels, indoor parking lots, etc.and the Wi-Fi system suffers from low accuracy, this paper presents a Wi- Fi/GPS integrated positioning system based on the federate Kalman filter (FKF).The local optimal estimates of the Wi- Fi positioning and GPS are produced by two local filters operating in parallel and then inputted to a master filter to yield a globally optimal estimate.Simulation results show that the accuracy is remarkably improved by about 70％ compared with GPS positioning alone and 81％ compared with Wi-Fi alone.The scope of positioning is also effectively expanded.%针对全球卫星定位系统(GPS)在密集城市地带、隧道、室内停车场等环境下不可用及Wi-Fi定位精度不足的问题,提出了一种Wi-Fi/GPS组合定位系统.该系统基于联邦Kalman滤波器,先通过两个并行的局部滤波器获得Wi-Fi、GPS定位子系统的局部最优估计,再由主滤波器融合得到最优全局估计.仿真结果表明:较之单独使用GPS或Wi-Fi,组合定位系统的定位精度分别提高了近70%和81%,且有效扩大了应用范围.
A Method of Time-Varying Rayleigh Channel Tracking in MIMO Radio System
Institute of Scientific and Technical Information of China (English)
GONG Yan-fei; HE Zi-shu; HAN Chun-lin
2005-01-01
A method of MIMO channel tracking based on Kalman filter and MMSE-DFE is proposed. The Kalman filter tracks the time-varying channel by using the MMSE-DFE decision and the MMSE-DFE conducts the next decision by using the channel estimates produced by the Kalman filter. Polynomial fitting is used to bridge the gap between the channel estimates produced by the Kalman filter and those needed for the DFE decision. Computer simulation demonstrates that this method can track the MIMO time-varying channel effectively.
基于System Generator的卡尔曼滤波器实现%Implementation of Kalman FilterBased on System Generator
Institute of Scientific and Technical Information of China (English)
李立早
2013-01-01
卡尔曼滤波器具有收敛速度快和精度高的特点,在导航领域被广泛应用.文章对卡尔曼滤波器的原理进行分析,在此基础上采用赛林思(Xilinx)公司的系统工具系统发生器(System Generator for DSP)设计了卡尔曼滤波器模块,并通过仿真验证了该滤波器的优越性.
Motion estimation using point cluster method and Kalman filter.
Senesh, M; Wolf, A
2009-05-01
The most frequently used method in a three dimensional human gait analysis involves placing markers on the skin of the analyzed segment. This introduces a significant artifact, which strongly influences the bone position and orientation and joint kinematic estimates. In this study, we tested and evaluated the effect of adding a Kalman filter procedure to the previously reported point cluster technique (PCT) in the estimation of a rigid body motion. We demonstrated the procedures by motion analysis of a compound planar pendulum from indirect opto-electronic measurements of markers attached to an elastic appendage that is restrained to slide along the rigid body long axis. The elastic frequency is close to the pendulum frequency, as in the biomechanical problem, where the soft tissue frequency content is similar to the actual movement of the bones. Comparison of the real pendulum angle to that obtained by several estimation procedures--PCT, Kalman filter followed by PCT, and low pass filter followed by PCT--enables evaluation of the accuracy of the procedures. When comparing the maximal amplitude, no effect was noted by adding the Kalman filter; however, a closer look at the signal revealed that the estimated angle based only on the PCT method was very noisy with fluctuation, while the estimated angle based on the Kalman filter followed by the PCT was a smooth signal. It was also noted that the instantaneous frequencies obtained from the estimated angle based on the PCT method is more dispersed than those obtained from the estimated angle based on Kalman filter followed by the PCT method. Addition of a Kalman filter to the PCT method in the estimation procedure of rigid body motion results in a smoother signal that better represents the real motion, with less signal distortion than when using a digital low pass filter. Furthermore, it can be concluded that adding a Kalman filter to the PCT procedure substantially reduces the dispersion of the maximal and minimal
Evolutionary Dynamic Multiobjective Optimization Via Kalman Filter Prediction.
Muruganantham, Arrchana; Tan, Kay Chen; Vadakkepat, Prahlad
2016-12-01
Evolutionary algorithms are effective in solving static multiobjective optimization problems resulting in the emergence of a number of state-of-the-art multiobjective evolutionary algorithms (MOEAs). Nevertheless, the interest in applying them to solve dynamic multiobjective optimization problems has only been tepid. Benchmark problems, appropriate performance metrics, as well as efficient algorithms are required to further the research in this field. One or more objectives may change with time in dynamic optimization problems. The optimization algorithm must be able to track the moving optima efficiently. A prediction model can learn the patterns from past experience and predict future changes. In this paper, a new dynamic MOEA using Kalman filter (KF) predictions in decision space is proposed to solve the aforementioned problems. The predictions help to guide the search toward the changed optima, thereby accelerating convergence. A scoring scheme is devised to hybridize the KF prediction with a random reinitialization method. Experimental results and performance comparisons with other state-of-the-art algorithms demonstrate that the proposed algorithm is capable of significantly improving the dynamic optimization performance.
Interharmonics analysis of power signals with fundamental frequency deviation using Kalman filtering
Energy Technology Data Exchange (ETDEWEB)
Koese, Neslihan; Salor, Oezguel; Leblebicioglu, Kemal [TUBITAK UZAY, Power Electronics Group, TR 06531 Ankara (Turkey); METU, Electrical and Electronics Eng. Dept., TR 06531 Ankara (Turkey)
2010-09-15
In this paper a spectral decomposition-based method for interharmonic computation is proposed for power systems where the fundamental frequency fluctuates significantly. In the proposed method, the frequency domain components of the voltage waveform are obtained by Kalman filtering. Both the system fundamental frequency and the correct spectrum of the voltage waveform, and hence the exact interharmonics are obtained. The proposed method is tested with both simulated and field data obtained from different electric arc furnace (EAF) plants, where the system frequency deviates continuously due to the fluctuating load demands. Since the interharmonic frequencies are obtained by using Kalman filtering, no leakage effect of the DFT-based methods is involved in case of frequency deviations, which is an important advantage of the proposed method. (author)
A Discontinuous Extended Kalman Filter for non-smooth dynamic problems
Chatzis, M. N.; Chatzi, E. N.; Triantafyllou, S. P.
2017-08-01
Problems that result into locally non-differentiable and hence non-smooth state-space equations are often encountered in engineering. Examples include problems involving material laws pertaining to plasticity, impact and highly non-linear phenomena. Estimating the parameters of such systems poses a challenge, particularly since the majority of system identification algorithms are formulated on the basis of smooth systems under the assumption of observability, identifiability and time invariance. For a smooth system, an observable state remains observable throughout the system evolution with the exception of few selected realizations of the state vector. However, for a non-smooth system the observable set of states and parameters may vary during the evolution of the system throughout a dynamic analysis. This may cause standard identification (ID) methods, such as the Extended Kalman Filter, to temporarily diverge and ultimately fail in accurately identifying the parameters of the system. In this work, the influence of observability of non-smooth systems to the performance of the Extended and Unscented Kalman Filters is discussed and a novel algorithm particularly suited for this purpose, termed the Discontinuous Extended Kalman Filter (DEKF), is proposed.
DEFF Research Database (Denmark)
Drews, Martin; Lauritzen, Bent; Madsen, Henrik
2005-01-01
A Kalman filter method is discussed for on-line estimation of radioactive release and atmospheric dispersion from a time series of off-site radiation monitoring data. The method is based on a state space approach, where a stochastic system equation describes the dynamics of the plume model...... parameters, and the observables are linked to the state variables through a static measurement equation. The method is analysed for three simple state space models using experimental data obtained at a nuclear research reactor. Compared to direct measurements of the atmospheric dispersion, the Kalman filter...... estimates are found to agree well with the measured parameters, provided that the radiation measurements are spread out in the cross-wind direction. For less optimal detector placement it proves difficult to distinguish variations in the source term and plume height; yet the Kalman filter yields consistent...
Estimation of Sonobuoy Position Relative to an Aircraft Using Extended Kalman Filters
1979-09-01
SECURITY CLASS. (a# this swot ) Naval Postgraduate School Ucasfe Monterey, California 93940 UnDcl assi F AIeNDONRDG SCHEDULE 1B. DISTRIBUTION...22 C. TEE SIX-STATE SYSTEM-----------------23 I). TEE TWO-STATE SYSTEM- ---------------- IV. ANAYLSIS ---------------------------- Z A. THE...simplifing techniques used in Kalman filters include precomputed gains. Although forfeiting the optimal Kalman gains, this has the advantage of reducing
IASI Radiance Data Assimilation in Local Ensemble Transform Kalman Filter
Cho, K.; Hyoung-Wook, C.; Jo, Y.
2016-12-01
Korea institute of Atmospheric Prediction Systems (KIAPS) is developing NWP model with data assimilation systems. Local Ensemble Transform Kalman Filter (LETKF) system, one of the data assimilation systems, has been developed for KIAPS Integrated Model (KIM) based on cubed-sphere grid and has successfully assimilated real data. LETKF data assimilation system has been extended to 4D- LETKF which considers time-evolving error covariance within assimilation window and IASI radiance data assimilation using KPOP (KIAPS package for observation processing) with RTTOV (Radiative Transfer for TOVS). The LETKF system is implementing semi operational prediction including conventional (sonde, aircraft) observation and AMSU-A (Advanced Microwave Sounding Unit-A) radiance data from April. Recently, the semi operational prediction system updated radiance observations including GPS-RO, AMV, IASI (Infrared Atmospheric Sounding Interferometer) data at July. A set of simulation of KIM with ne30np4 and 50 vertical levels (of top 0.3hPa) were carried out for short range forecast (10days) within semi operation prediction LETKF system with ensemble forecast 50 members. In order to only IASI impact, our experiments used only conventional and IAIS radiance data to same semi operational prediction set. We carried out sensitivity test for IAIS thinning method (3D and 4D). IASI observation number was increased by temporal (4D) thinning and the improvement of IASI radiance data impact on the forecast skill of model will expect.
Comparison of Kalman filter and optimal smoother estimates of spacecraft attitude
Sedlak, J.
1994-01-01
Given a valid system model and adequate observability, a Kalman filter will converge toward the true system state with error statistics given by the estimated error covariance matrix. The errors generally do not continue to decrease. Rather, a balance is reached between the gain of information from new measurements and the loss of information during propagation. The errors can be further reduced, however, by a second pass through the data with an optimal smoother. This algorithm obtains the optimally weighted average of forward and backward propagating Kalman filters. It roughly halves the error covariance by including future as well as past measurements in each estimate. This paper investigates whether such benefits actually accrue in the application of an optimal smoother to spacecraft attitude determination. Tests are performed both with actual spacecraft data from the Extreme Ultraviolet Explorer (EUVE) and with simulated data for which the true state vector and noise statistics are exactly known.
Thermal Error Modeling of the CNC Machine Tool Based on Data Fusion Method of Kalman Filter
Directory of Open Access Journals (Sweden)
Haitong Wang
2017-01-01
Full Text Available This paper presents a modeling methodology for the thermal error of machine tool. The temperatures predicted by modified lumped-mass method and the temperatures measured by sensors are fused by the data fusion method of Kalman filter. The fused temperatures, instead of the measured temperatures used in traditional methods, are applied to predict the thermal error. The genetic algorithm is implemented to optimize the parameters in modified lumped-mass method and the covariances in Kalman filter. The simulations indicate that the proposed method performs much better compared with the traditional method of MRA, in terms of prediction accuracy and robustness under a variety of operating conditions. A compensation system is developed based on the controlling system of Siemens 840D. Validated by the compensation experiment, the thermal error after compensation has been reduced dramatically.
Bridging the ensemble Kalman filter and particle filters: the adaptive Gaussian mixture filter
Stordal, Andreas Størksen; Karlsen, Hans A.; Nævdal, Geir; Hans J. Skaug; Vallès, Brice
2010-01-01
The nonlinear filtering problem occurs in many scientific areas. Sequential Monte Carlo solutions with the correct asymptotic behavior such as particle filters exist, but they are computationally too expensive when working with high-dimensional systems. The ensemble Kalman filter (EnKF) is a more robust method that has shown promising results with a small sample size, but the samples are not guaranteed to come from the true posterior distribution. By approximating the model error with a Gauss...
Kalman Filter Chemical Data Assimilation: A Case Study in January 1992
Lary, D. J.; Khattatov, B.; Atlas, Robert; Mussa, H.
2002-01-01
This paper describes a Kalman filter chemical data assimilation system and its use for analysing a vertical atmospheric profile during January 1992. The vertical profile was at an equivalent PV latitude (phi(sub e)) of 55 deg S and consisted of 21 potential temperature (theta) levels spaced equally in log(theta) between 400 K and 2000 K. This equivalent latitude was chosen as it was well observed during January 1992 by instruments on board the Upper Atmosphere Research Satellite (UARS).
Hierarchical Bayes Ensemble Kalman Filter for geophysical data assimilation
Tsyrulnikov, Michael; Rakitko, Alexander
2016-04-01
In the Ensemble Kalman Filter (EnKF), the forecast error covariance matrix B is estimated from a sample (ensemble), which inevitably implies a degree of uncertainty. This uncertainty is especially large in high dimensions, where the affordable ensemble size is orders of magnitude less than the dimensionality of the system. Common remedies include ad-hoc devices like variance inflation and covariance localization. The goal of this study is to optimize the account for the inherent uncertainty of the B matrix in EnKF. Following the idea by Myrseth and Omre (2010), we explicitly admit that the B matrix is unknown and random and estimate it along with the state (x) in an optimal hierarchical Bayes analysis scheme. We separate forecast errors into predictability errors (i.e. forecast errors due to uncertainties in the initial data) and model errors (forecast errors due to imperfections in the forecast model) and include the two respective components P and Q of the B matrix into the extended control vector (x,P,Q). Similarly, we break the traditional forecast ensemble into the predictability-error related ensemble and model-error related ensemble. The reason for the separation of model errors from predictability errors is the fundamental difference between the two sources of error. Model error are external (i.e. do not depend on the filter's performance) whereas predictability errors are internal to a filter (i.e. are determined by the filter's behavior). At the analysis step, we specify Inverse Wishart based priors for the random matrices P and Q and conditionally Gaussian prior for the state x. Then, we update the prior distribution of (x,P,Q) using both observation and ensemble data, so that ensemble members are used as generalized observations and ordinary observations are allowed to influence the covariances. We show that for linear dynamics and linear observation operators, conditional Gaussianity of the state is preserved in the course of filtering. At the forecast
Rapid Transfer Alignment of MEMS SINS Based on Adaptive Incremental Kalman Filter
Directory of Open Access Journals (Sweden)
Hairong Chu
2017-01-01
Full Text Available In airborne MEMS SINS transfer alignment, the error of MEMS IMU is highly environment-dependent and the parameters of the system model are also uncertain, which may lead to large error and bad convergence of the Kalman filter. In order to solve this problem, an improved adaptive incremental Kalman filter (AIKF algorithm is proposed. First, the model of SINS transfer alignment is defined based on the “Velocity and Attitude” matching method. Then the detailed algorithm progress of AIKF and its recurrence formulas are presented. The performance and calculation amount of AKF and AIKF are also compared. Finally, a simulation test is designed to verify the accuracy and the rapidity of the AIKF algorithm by comparing it with KF and AKF. The results show that the AIKF algorithm has better estimation accuracy and shorter convergence time, especially for the bias of the gyroscope and the accelerometer, which can meet the accuracy and rapidity requirement of transfer alignment.
KALMAN FILTERING CORRECTION IN REAL-TIME FORECASTING WITH HYDRODYNAMIC MODEL
Institute of Scientific and Technical Information of China (English)
WU Xiao-ling; WANG Chuan-hai; CHEN Xi; XIANG Xiao-hua; ZHOU Quan
2008-01-01
Accurate and reliable flood forecast is crucial for efficient real-time river management, including flood control, flood warning, reservoir operation and river regulation. In order to improve the estimate of the initial state of the forecasting system and to reduce the errors in the forecast period a data assimilation procedure was often need. The Kalman filter was proven to be an efficient method to adjust real-time flood series and improve the initial conditions before the forecast. A new model integrating the hydraulic model with the Kalman filter for real-time correction of flood forecast was developed and applied in the Three Gorges interzone of the Yangtze River. The method was calibrated and verified against the observed flood stage and discharge during Three Gorges Dam construction periods (2004). The results demonstrate that the new model incorporates an accurate and fast updating technique can improve the reliability of the flood forecast.
On the Kalman Filter error covariance collapse into the unstable subspace
Trevisan, A.; Palatella, L.
2011-03-01
When the Extended Kalman Filter is applied to a chaotic system, the rank of the error covariance matrices, after a sufficiently large number of iterations, reduces to N+ + N0 where N+ and N0 are the number of positive and null Lyapunov exponents. This is due to the collapse into the unstable and neutral tangent subspace of the solution of the full Extended Kalman Filter. Therefore the solution is the same as the solution obtained by confining the assimilation to the space spanned by the Lyapunov vectors with non-negative Lyapunov exponents. Theoretical arguments and numerical verification are provided to show that the asymptotic state and covariance estimates of the full EKF and of its reduced form, with assimilation in the unstable and neutral subspace (EKF-AUS) are the same. The consequences of these findings on applications of Kalman type Filters to chaotic models are discussed.
Using Kalman Filter to Guarantee QoS Robustness of Web Server
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
The exponential growth of the Internet coupled with the increasing popularity of dynamically generated content on the World Wide Web, has created the need for more and faster Web servers capable of serving the over 100 million Internet users. To converge the control method has emerged as a promising technique to solve the Web QoS problem. In this paper, a model of adaptive session is presented and a session flow self-regulating algorism based on Kalman Filter are proposed towards Web Server. And a Web QoS self-regulating scheme is advanced. To attain the goal of on-line system identification, the optimized estimation of QoS parameters is fulfilled by utilizing Kalman Filter in full domain. The simulation results shows that the proposed scheme can guarantee the QoS with both robustness and stability .
Identification of parameters in nonlinear geotechnical models using extenden Kalman filter
Directory of Open Access Journals (Sweden)
Nestorović Tamara
2014-01-01
Full Text Available Direct measurement of relevant system parameters often represents a problem due to different limitations. In geomechanics, measurement of geotechnical material constants which constitute a material model is usually a very diffcult task even with modern test equipment. Back-analysis has proved to be a more effcient and more economic method for identifying material constants because it needs measurement data such as settlements, pore pressures, etc., which are directly measurable, as inputs. Among many model parameter identification methods, the Kalman filter method has been applied very effectively in recent years. In this paper, the extended Kalman filter – local iteration procedure incorporated with finite element analysis (FEA software has been implemented. In order to prove the effciency of the method, parameter identification has been performed for a nonlinear geotechnical model.
Accounting for model error due to unresolved scales within ensemble Kalman filtering
Mitchell, Lewis
2014-01-01
We propose a method to account for model error due to unresolved scales in the context of the ensemble transform Kalman filter (ETKF). The approach extends to this class of algorithms the deterministic model error formulation recently explored for variational schemes and extended Kalman filter. The model error statistic required in the analysis update is estimated using historical reanalysis increments and a suitable model error evolution law. Two different versions of the method are described; a time-constant model error treatment where the same model error statistical description is time-invariant, and a time-varying treatment where the assumed model error statistics is randomly sampled at each analysis step. We compare both methods with the standard method of dealing with model error through inflation and localization, and illustrate our results with numerical simulations on a low order nonlinear system exhibiting chaotic dynamics. The results show that the filter skill is significantly improved through th...
Soken, Halil Ersin; Hajiyev, Chingiz
2010-07-01
In the normal operation conditions of a pico satellite, a conventional Unscented Kalman Filter (UKF) gives sufficiently good estimation results. However, if the measurements are not reliable because of any kind of malfunction in the estimation system, UKF gives inaccurate results and diverges by time. This study introduces Robust Unscented Kalman Filter (RUKF) algorithms with the filter gain correction for the case of measurement malfunctions. By the use of defined variables named as measurement noise scale factor, the faulty measurements are taken into consideration with a small weight, and the estimations are corrected without affecting the characteristics of the accurate ones. Two different RUKF algorithms, one with single scale factor and one with multiple scale factors, are proposed and applied for the attitude estimation process of a pico satellite. The results of these algorithms are compared for different types of measurement faults in different estimation scenarios and recommendations about their applications are given.
A Two-stage Kalman Filter for Sensorless Direct Torque Controlled PM Synchronous Motor Drive
Directory of Open Access Journals (Sweden)
Boyu Yi
2013-01-01
Full Text Available This paper presents an optimal two-stage extended Kalman filter (OTSEKF for closed-loop flux, torque, and speed estimation of a permanent magnet synchronous motor (PMSM to achieve sensorless DTC-SVPWM operation of drive system. The novel observer is obtained by using the same transformation as in a linear Kalman observer, which is proposed by C.-S. Hsieh and F.-C. Chen in 1999. The OTSEKF is an effective implementation of the extended Kalman filter (EKF and provides a recursive optimum state estimation for PMSMs using terminal signals that may be polluted by noise. Compared to a conventional EKF, the OTSEKF reduces the number of arithmetic operations. Simulation and experimental results verify the effectiveness of the proposed OTSEKF observer for DTC of PMSMs.
A cognition-based method to ease the computational load for an extended Kalman filter.
Li, Yanpeng; Li, Xiang; Deng, Bin; Wang, Hongqiang; Qin, Yuliang
2014-12-03
The extended Kalman filter (EKF) is the nonlinear model of a Kalman filter (KF). It is a useful parameter estimation method when the observation model and/or the state transition model is not a linear function. However, the computational requirements in EKF are a difficulty for the system. With the help of cognition-based designation and the Taylor expansion method, a novel algorithm is proposed to ease the computational load for EKF in azimuth predicting and localizing under a nonlinear observation model. When there are nonlinear functions and inverse calculations for matrices, this method makes use of the major components (according to current performance and the performance requirements) in the Taylor expansion. As a result, the computational load is greatly lowered and the performance is ensured. Simulation results show that the proposed measure will deliver filtering output with a similar precision compared to the regular EKF. At the same time, the computational load is substantially lowered.
Incorporation of Time Delayed Measurements in a Discrete-time Kalman Filter
DEFF Research Database (Denmark)
Larsen, Thomas Dall; Andersen, Nils Axel; Ravn, Ole;
1998-01-01
In many practical systems there is a delay in some of the sensor devices, for instance vision measurements that may have a long processing time. How to fuse these measurements in a Kalman filter is not a trivial problem if the computational delay is critical. Depending on how much time...... using past and present estimates of the Kalman filter and calculating an optimal gain for this extrapolated measurement...... there is at hand, the designer has to make trade offs between optimality and computational burden of the filter. In this paper various methods in the literature along with a new method proposed by the authors will be presented and compared. The new method is based on “extrapolating” the measurement to present time...
Rapid Transfer Alignment of MEMS SINS Based on Adaptive Incremental Kalman Filter.
Chu, Hairong; Sun, Tingting; Zhang, Baiqiang; Zhang, Hongwei; Chen, Yang
2017-01-14
In airborne MEMS SINS transfer alignment, the error of MEMS IMU is highly environment-dependent and the parameters of the system model are also uncertain, which may lead to large error and bad convergence of the Kalman filter. In order to solve this problem, an improved adaptive incremental Kalman filter (AIKF) algorithm is proposed. First, the model of SINS transfer alignment is defined based on the "Velocity and Attitude" matching method. Then the detailed algorithm progress of AIKF and its recurrence formulas are presented. The performance and calculation amount of AKF and AIKF are also compared. Finally, a simulation test is designed to verify the accuracy and the rapidity of the AIKF algorithm by comparing it with KF and AKF. The results show that the AIKF algorithm has better estimation accuracy and shorter convergence time, especially for the bias of the gyroscope and the accelerometer, which can meet the accuracy and rapidity requirement of transfer alignment.
Zhang, Hao; Niu, Yanxiong; Lu, Jiazhen; Zhang, He
2016-11-20
Angular velocity information is a requisite for a spacecraft guidance, navigation, and control system. In this paper, an approach for angular velocity estimation based merely on star vector measurement with an improved current statistical model Kalman filter is proposed. High-precision angular velocity estimation can be achieved under dynamic conditions. The amount of calculation is also reduced compared to a Kalman filter. Different trajectories are simulated to test this approach, and experiments with real starry sky observation are implemented for further confirmation. The estimation accuracy is proved to be better than 10-4 rad/s under various conditions. Both the simulation and the experiment demonstrate that the described approach is effective and shows an excellent performance under both static and dynamic conditions.
Detection of Sensor Faults in Small Helicopter UAVs Using Observer/Kalman Filter Identification
Directory of Open Access Journals (Sweden)
Guillermo Heredia
2011-01-01
Full Text Available Reliability is a critical issue in navigation of unmanned aerial vehicles (UAVs since there is no human pilot that can react to any abnormal situation. Due to size and cost limitations, redundant sensor schemes and aeronautical-grade navigation sensors used in large aircrafts cannot be installed in small UAVs. Therefore, other approaches like analytical redundancy should be used to detect faults in navigation sensors and increase reliability. This paper presents a sensor fault detection and diagnosis system for small autonomous helicopters based on analytical redundancy. Fault detection is accomplished by evaluating any significant change in the behaviour of the vehicle with respect to the fault-free behaviour, which is estimated by using an observer. The observer is obtained from input-output experimental data with the Observer/Kalman Filter Identification (OKID method. The OKID method is able to identify the system and an observer with properties similar to a Kalman filter, directly from input-output experimental data. Results are similar to the Kalman filter, but, with the proposed method, there is no need to estimate neither system matrices nor sensor and process noise covariance matrices. The system has been tested with real helicopter flight data, and the results compared with other methods.
Recursive three-dimensional model reconstruction based on Kalman filtering.
Yu, Ying Kin; Wong, Kin Hong; Chang, Michael Ming Yuen
2005-06-01
A recursive two-step method to recover structure and motion from image sequences based on Kalman filtering is described in this paper. The algorithm consists of two major steps. The first step is an extended Kalman filter (EKF) for the estimation of the object's pose. The second step is a set of EKFs, one for each model point, for the refinement of the positions of the model features in the three-dimensional (3-D) space. These two steps alternate from frame to frame. The initial model converges to the final structure as the image sequence is scanned sequentially. The performance of the algorithm is demonstrated with both synthetic data and real-world objects. Analytical and empirical comparisons are made among our approach, the interleaved bundle adjustment method, and the Kalman filtering-based recursive algorithm by Azarbayejani and Pentland. Our approach outperformed the other two algorithms in terms of computation speed without loss in the quality of model reconstruction.
A numerical storm surge forecast model with Kalman filter
Institute of Scientific and Technical Information of China (English)
Yu Fujiang; Zhang Zhanhai; Lin Yihua
2001-01-01
Kalman filter data assimilation technique is incorporated into a standard two-dimensional linear storm surge model. Imperfect model equation and imperfect meteorological forcimg are accounted for by adding noise terms to the momentum equations. The deterministic model output is corrected by using the available tidal gauge station data. The stationary Kalman filter algorithm for the model domain is calculated by an iterative procedure using specified information on the inaccuracies in the momentum equations and specified error information for the observations. An application to a real storm surge that occurred in the summer of 1956 in the East China Sea is performed by means of this data assimilation technique. The result shows that Kalman filter is useful for storm surge forecast and hindcast.
Identifying Bearing Rotordynamic Coefficients using an Extended Kalman Filter
Miller, Bard A.; Howard, Samuel A.
2008-01-01
An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor-dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter s performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor-bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.
Identifying Bearing Rotodynamic Coefficients Using an Extended Kalman Filter
Miller, Brad A.; Howard, Samuel A.
2008-01-01
An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter's performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.
Gao, Xiangdong; Chen, Yuquan; You, Deyong; Xiao, Zhenlin; Chen, Xiaohui
2017-02-01
An approach for seam tracking of micro gap weld whose width is less than 0.1 mm based on magneto optical (MO) imaging technique during butt-joint laser welding of steel plates is investigated. Kalman filtering(KF) technology with radial basis function(RBF) neural network for weld detection by an MO sensor was applied to track the weld center position. Because the laser welding system process noises and the MO sensor measurement noises were colored noises, the estimation accuracy of traditional KF for seam tracking was degraded by the system model with extreme nonlinearities and could not be solved by the linear state-space model. Also, the statistics characteristics of noises could not be accurately obtained in actual welding. Thus, a RBF neural network was applied to the KF technique to compensate for the weld tracking errors. The neural network can restrain divergence filter and improve the system robustness. In comparison of traditional KF algorithm, the RBF with KF was not only more effectively in improving the weld tracking accuracy but also reduced noise disturbance. Experimental results showed that magneto optical imaging technique could be applied to detect micro gap weld accurately, which provides a novel approach for micro gap seam tracking.
Robust double gain unscented Kalman filter for small satellite attitude estimation
Cao, Lu; Yang, Weiwei; Li, Hengnian; Zhang, Zhidong; Shi, Jianjun
2017-08-01
Limited by the low precision of small satellite sensors, the estimation theories with high performance remains the most popular research topic for the attitude estimation. The Kalman filter (KF) and its extensions have been widely applied in the satellite attitude estimation and achieved plenty of achievements. However, most of the existing methods just take use of the current time-step's priori measurement residuals to complete the measurement update and state estimation, which always ignores the extraction and utilization of the previous time-step's posteriori measurement residuals. In addition, the uncertainty model errors always exist in the attitude dynamic system, which also put forward the higher performance requirements for the classical KF in attitude estimation problem. Therefore, the novel robust double gain unscented Kalman filter (RDG-UKF) is presented in this paper to satisfy the above requirements for the small satellite attitude estimation with the low precision sensors. It is assumed that the system state estimation errors can be exhibited in the measurement residual; therefore, the new method is to derive the second Kalman gain Kk2 for making full use of the previous time-step's measurement residual to improve the utilization efficiency of the measurement data. Moreover, the sequence orthogonal principle and unscented transform (UT) strategy are introduced to robust and enhance the performance of the novel Kalman Filter in order to reduce the influence of existing uncertainty model errors. Numerical simulations show that the proposed RDG-UKF is more effective and robustness in dealing with the model errors and low precision sensors for the attitude estimation of small satellite by comparing with the classical unscented Kalman Filter (UKF).
Attitude Determination for MAVs Using a Kalman Filter
Institute of Scientific and Technical Information of China (English)
LIU Cheng; ZHOU Zhaoying; FU Xu
2008-01-01
This paper presents a Kalman filter to effectively and economically determine the Euler angles for micro aerial vehicles(MAVs),whose size and payload are severely limited.The filter uses data from a series of micro-electro mechanical system sensors to determine the selected 3 vanables of the direction cosine matrix and the bias of the rata gyro sensors as state elements in a dynamic model,with the gravitational acceleration to build a measurement model.For high speed maneuvers,rigid motion equations are used to correct the measurements of the gravitational acceleration.The filter is designed to automatically tune its gain based on the dynamic system state.Simulations indicate that the Euler angles can be determined with standard deviations less than 3.The algorithm was successfully implemented in a miniature attitude measurement system suitable for MAVs.Aerobatic flights show that the attitude determination algorithm works effectively.The attitude determination algorithm is effective and economical,and can also be applied to bionic rebofishs and land vehicles,whose size and payload are also greatly limited.
Energy Technology Data Exchange (ETDEWEB)
Man, Jun; Li, Weixuan; Zeng, Lingzao; Wu, Laosheng
2016-06-01
The ensemble Kalman filter (EnKF) has gained popularity in hydrological data assimilation problems. As a Monte Carlo based method, a relatively large ensemble size is usually required to guarantee the accuracy. As an alternative approach, the probabilistic collocation based Kalman filter (PCKF) employs the polynomial chaos to approximate the original system. In this way, the sampling error can be reduced. However, PCKF suffers from the so-called "curse of dimensionality". When the system nonlinearity is strong and number of parameters is large, PCKF could be even more computationally expensive than EnKF. Motivated by most recent developments in uncertainty quantification, we propose a restart adaptive probabilistic collocation based Kalman filter (RAPCKF) for data assimilation in unsaturated flow problems. During the implementation of RAPCKF, the important parameters are identified and active PCE basis functions are adaptively selected. The "restart" technology is used to eliminate the inconsistency between model parameters and states. The performance of RAPCKF is tested with numerical cases of unsaturated flow models. It is shown that RAPCKF is more efficient than EnKF with the same computational cost. Compared with the traditional PCKF, the RAPCKF is more applicable in strongly nonlinear and high dimensional problems.
An Adaptive Kalman Filter Excisor for Suppressing Narrowband Interference
1993-11-01
interferences in- connues. Le filtre de Kalman doit alors "apprendre" ý ajuster un de ses param~tres pour effectuer le meilleur traitement. L’erreur est...4"L l B"• -- -- - - -.- ,_, . An~. A)7cQ 0 -QGOP II liii 111111 IIa( Naional 06fenso I ’ I Deence nitonals I "It AN ADAPTIVE KALMAN FILTER EXCISOR...Ottawa 0 A o~ oO Best Available COpy 4INational Defense Defence nationals AN ADAPTIVE KALMAN FILTER EXCISOR FOR SUPPRESSING NARROWBAND INTERFERENCE by
A THEORETICAL STUDY ON SIMPLIFIED KALMAN FILTER IN DATA ASSIMILATION
Institute of Scientific and Technical Information of China (English)
Ma Zhai-pu; Huang Da-ji; Zhang Ben-zhao
2003-01-01
In this paper, we put forward a new method to reduce the calculation amount of the gain matrix of Kalman filter in data assimilation. We rewrite the vector describing the total state variables with two vectors whose dimensions are small and thus obtain the main parts and the trivial parts of the state variables. On the basis of the rewrittten formula, we not only develop a reduced Kalman filter scheme, but also obtain the transition equations about truncation errors, with which the validity of the main parts acting for the total state variables can be evaluated quantitatively. The error transition equations thus offer an indirect testimony to the rationality of the main parts.
Adaptive error covariances estimation methods for ensemble Kalman filters
Energy Technology Data Exchange (ETDEWEB)
Zhen, Yicun, E-mail: zhen@math.psu.edu [Department of Mathematics, The Pennsylvania State University, University Park, PA 16802 (United States); Harlim, John, E-mail: jharlim@psu.edu [Department of Mathematics and Department of Meteorology, The Pennsylvania State University, University Park, PA 16802 (United States)
2015-08-01
This paper presents a computationally fast algorithm for estimating, both, the system and observation noise covariances of nonlinear dynamics, that can be used in an ensemble Kalman filtering framework. The new method is a modification of Belanger's recursive method, to avoid an expensive computational cost in inverting error covariance matrices of product of innovation processes of different lags when the number of observations becomes large. When we use only product of innovation processes up to one-lag, the computational cost is indeed comparable to a recently proposed method by Berry–Sauer's. However, our method is more flexible since it allows for using information from product of innovation processes of more than one-lag. Extensive numerical comparisons between the proposed method and both the original Belanger's and Berry–Sauer's schemes are shown in various examples, ranging from low-dimensional linear and nonlinear systems of SDEs and 40-dimensional stochastically forced Lorenz-96 model. Our numerical results suggest that the proposed scheme is as accurate as the original Belanger's scheme on low-dimensional problems and has a wider range of more accurate estimates compared to Berry–Sauer's method on L-96 example.
Institute of Scientific and Technical Information of China (English)
李宏林; 赵鹏兵
2012-01-01
According to the random disturbance and noise in disk drive servo system and the traditional PID control has the disadvantages of lag or overshoot, and the traditional sliding mode control has the faults that ask for system uncertainty factors to be known. Then, this paper proposes the exponential approach law sliding mode control method based on the Kalman filter. The method of designing a sliding mode controller based on the reaching condition of the exponential approach law can handle the uncertainty problems in disk drive servo system better, and it is not sensitive to the external disturbances. The simulation experiment of this algorithm is processed based on the MATLAB environment. The simulation results show that this algorithm can weaken the vibration and suppress the random disturbance. This method can be used in the disk drive servo system to significantly improve the dynamic performance as well as it can enhance the stability and control accuracy of the system.%针对磁盘驱动伺服系统中存在的诸多随机干扰和随机噪声等特点,常规的PID控制在该类系统中存在滞后或超调,以及传统的滑模控制要求系统不确定因素的边界为已知等缺点,本文提出了基于Kalman滤波算法的指数趋近律滑模变结构控制方法,以指数趋近律作为到达条件设计滑模变结构控制器.该方法能够较好地处理磁盘驱动伺服系统中的不确定性问题,而且对外界干扰不敏感.在MATLAB环境下对该算法进行了仿真试验研究,结果表明,该方法能够很好地削弱抖振和抑制伺服系统的随机干扰.将该方法应用于磁盘驱动伺服系统可以显著地改善系统的动态特性,并能使系统的稳定性和控制精度大大提高.
El Serafy, G.Y.H.; Mynett, A.E.
2008-01-01
Numerical models of a water system are always based on assumptions and simplifications that may result in errors in the model's predictions. Such errors can be reduced through the use of data assimilation and thus can significantly improve the success rate of the predictions and operational forecast
Blankenship, Clay B.; Crosson, William L.; Case, Jonathan L.; Hale, Robert
2010-01-01
Improve simulations of soil moisture/temperature, and consequently boundary layer states and processes, by assimilating AMSR-E soil moisture estimates into a coupled land surface-mesoscale model Provide a new land surface model as an option in the Land Information System (LIS)
Quaternion-Based Kalman Filter for AHRS Using an Adaptive-Step Gradient Descent Algorithm
Directory of Open Access Journals (Sweden)
Li Wang
2015-09-01
Full Text Available This paper presents a quaternion-based Kalman filter for real-time estimation of the orientation of a quadrotor. Quaternions are used to represent rotation relationship between navigation frame and body frame. Processing of a 3-axis accelerometer using Adaptive-Step Gradient Descent (ASGD produces a computed quaternion input to the Kalman filter. The step-size in GD is set in direct proportion to the physical orientation rate. Kalman filter combines 3-axis gyroscope and computed quaternion to determine pitch and roll angles. This combination overcomes linearization error of the measurement equations and reduces the calculation cost. 3-axis magnetometer is separated from ASGD to independently calculate yaw angle for Attitude Heading Reference System (AHRS. This AHRS algorithm is able to remove the magnetic distortion impact. Experiments are carried out in the small-size flight controller and the real world flying test shows the proposed AHRS algorithm is adequate for the real-time estimation of the orientation of a quadrotor.
Directory of Open Access Journals (Sweden)
Ming Liu
2015-01-01
Full Text Available This paper is concerned with the topic of gravity matching aided inertial navigation technology using Kalman filter. The dynamic state space model for Kalman filter is constructed as follows: the error equation of the inertial navigation system is employed as the process equation while the local gravity model based on 9-point surface interpolation is employed as the observation equation. The unscented Kalman filter is employed to address the nonlinearity of the observation equation. The filter is refined in two ways as follows. The marginalization technique is employed to explore the conditionally linear substructure to reduce the computational load; specifically, the number of the needed sigma points is reduced from 15 to 5 after this technique is used. A robust technique based on Chi-square test is employed to make the filter insensitive to the uncertainties in the above constructed observation model. Numerical simulation is carried out, and the efficacy of the proposed method is validated by the simulation results.
The Joint Adaptive Kalman Filter (JAKF) for Vehicle Motion State Estimation.
Gao, Siwei; Liu, Yanheng; Wang, Jian; Deng, Weiwen; Oh, Heekuck
2016-07-16
This paper proposes a multi-sensory Joint Adaptive Kalman Filter (JAKF) through extending innovation-based adaptive estimation (IAE) to estimate the motion state of the moving vehicles ahead. JAKF views Lidar and Radar data as the source of the local filters, which aims to adaptively adjust the measurement noise variance-covariance (V-C) matrix 'R' and the system noise V-C matrix 'Q'. Then, the global filter uses R to calculate the information allocation factor 'β' for data fusion. Finally, the global filter completes optimal data fusion and feeds back to the local filters to improve the measurement accuracy of the local filters. Extensive simulation and experimental results show that the JAKF has better adaptive ability and fault tolerance. JAKF enables one to bridge the gap of the accuracy difference of various sensors to improve the integral filtering effectivity. If any sensor breaks down, the filtered results of JAKF still can maintain a stable convergence rate. Moreover, the JAKF outperforms the conventional Kalman filter (CKF) and the innovation-based adaptive Kalman filter (IAKF) with respect to the accuracy of displacement, velocity, and acceleration, respectively.
Kalman Filter for Estimation of Sensor Acceleration Using Six - axis Inertial Sensor
Energy Technology Data Exchange (ETDEWEB)
Lee, Jung Keun [Hankyong National University, Anseong (Korea, Republic of)
2015-02-15
Although an accelerometer is a sensor that measures acceleration, it cannot be used by itself to measure the acceleration when the orientation of the sensor changes. This paper introduces a Kalman filter for the estimation of a sensor acceleration based on a six-axis inertial sensor (i.e., a three-axis accelerometer and three-axis gyroscope). The novelty of the proposed Kalman filter lies in the fact that its state vector includes not only the tilt angle variable but also the sensor acceleration. Thus, the filter can explicitly estimate the latter with a high accuracy. The accuracy of acceleration estimates were validated experimentally under three different dynamic conditions, using an optical motion capture system. It could be concluded that the performance of the proposed Kalman filter was comparable to that of the state-of-the-art estimation algorithm employed by the Xsens MTw. The proposed algorithm may be more suitable than inertial/magnetic sensor-based algorithms for various applications adopting six-axis inertial sensors.
Discrete Kalman Filter based Sensor Fusion for Robust Accessibility Interfaces
Ghersi, I.; Mariño, M.; Miralles, M. T.
2016-04-01
Human-machine interfaces have evolved, benefiting from the growing access to devices with superior, embedded signal-processing capabilities, as well as through new sensors that allow the estimation of movements and gestures, resulting in increasingly intuitive interfaces. In this context, sensor fusion for the estimation of the spatial orientation of body segments allows to achieve more robust solutions, overcoming specific disadvantages derived from the use of isolated sensors, such as the sensitivity of magnetic-field sensors to external influences, when used in uncontrolled environments. In this work, a method for the combination of image-processing data and angular-velocity registers from a 3D MEMS gyroscope, through a Discrete-time Kalman Filter, is proposed and deployed as an alternate user interface for mobile devices, in which an on-screen pointer is controlled with head movements. Results concerning general performance of the method are presented, as well as a comparative analysis, under a dedicated test application, with results from a previous version of this system, in which the relative-orientation information was acquired directly from MEMS sensors (3D magnetometer-accelerometer). These results show an improved response for this new version of the pointer, both in terms of precision and response time, while keeping many of the benefits that were highlighted for its predecessor, giving place to a complementary method for signal acquisition that can be used as an alternative-input device, as well as for accessibility solutions.
Software Would Largely Automate Design of Kalman Filter
Chuang, Jason C. H.; Negast, William J.
2005-01-01
Embedded Navigation Filter Automatic Designer (ENFAD) is a computer program being developed to automate the most difficult tasks in designing embedded software to implement a Kalman filter in a navigation system. The most difficult tasks are selection of error states of the filter and tuning of filter parameters, which are timeconsuming trial-and-error tasks that require expertise and rarely yield optimum results. An optimum selection of error states and filter parameters depends on navigation-sensor and vehicle characteristics, and on filter processing time. ENFAD would include a simulation module that would incorporate all possible error states with respect to a given set of vehicle and sensor characteristics. The first of two iterative optimization loops would vary the selection of error states until the best filter performance was achieved in Monte Carlo simulations. For a fixed selection of error states, the second loop would vary the filter parameter values until an optimal performance value was obtained. Design constraints would be satisfied in the optimization loops. Users would supply vehicle and sensor test data that would be used to refine digital models in ENFAD. Filter processing time and filter accuracy would be computed by ENFAD.
Paris law parameter identification based on the Extended Kalman Filter
Directory of Open Access Journals (Sweden)
Melgar M.
2016-01-01
Full Text Available Aircraft structures are commonly subjected to repeated loading cycles leading to fatigue damage. Fatigue data can be extrapolated by fatigue models which are adopted to describe the fatigue damage behaviour. Such models depend on their parameters for accurate prediction of the fatigue life. Therefore, several methods have been developed for estimating the model parameters for both linear and nonlinear systems. It is useful for a broad class of parameter identification problems when the dynamic model is not known. In this paper, the Paris law is used as fatigue-crack-length growth model on a metallic component under loading cycles. The Extended Kalman Filter (EKF is proposed as estimation method. Simulated crack length data is used to validate the estimation method. Based on experimental data obtained from fatigue experiment, the crack length and model parameters are estimated. Accurate model parameters allow a more realistic prediction of the fatigue life, consequently, the remaining useful life (RUL of component can be accurately computed. In this sense, maintenance performance could be improved.
Vehicle State Information Estimation with the Unscented Kalman Filter
Directory of Open Access Journals (Sweden)
Hongbin Ren
2014-01-01
Full Text Available The vehicle state information plays an important role in the vehicle active safety systems; this paper proposed a new concept to estimate the instantaneous vehicle speed, yaw rate, tire forces, and tire kinemics information in real time. The estimator is based on the 3DoF vehicle model combined with the piecewise linear tire model. The estimator is realized using the unscented Kalman filter (UKF, since it is based on the unscented transfer technique and considers high order terms during the measurement and update stage. The numerical simulations are carried out to further investigate the performance of the estimator under high friction and low friction road conditions in the MATLAB/Simulink combined with the Carsim environment. The simulation results are compared with the numerical results from Carsim software, which indicate that UKF can estimate the vehicle state information accurately and in real time; the proposed estimation will provide the necessary and reliable state information to the vehicle controller in the future.
On a nonlinear Kalman filter with simplified divided difference approximation
Luo, Xiaodong
2012-03-01
We present a new ensemble-based approach that handles nonlinearity based on a simplified divided difference approximation through Stirling\\'s interpolation formula, which is hence called the simplified divided difference filter (sDDF). The sDDF uses Stirling\\'s interpolation formula to evaluate the statistics of the background ensemble during the prediction step, while at the filtering step the sDDF employs the formulae in an ensemble square root filter (EnSRF) to update the background to the analysis. In this sense, the sDDF is a hybrid of Stirling\\'s interpolation formula and the EnSRF method, while the computational cost of the sDDF is less than that of the EnSRF. Numerical comparison between the sDDF and the EnSRF, with the ensemble transform Kalman filter (ETKF) as the representative, is conducted. The experiment results suggest that the sDDF outperforms the ETKF with a relatively large ensemble size, and thus is a good candidate for data assimilation in systems with moderate dimensions. © 2011 Elsevier B.V. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Park, Dong Sun; Lee, Joon Whan; Kim, Hyong Suk; Yoon, Sook; Lee, Jin Ho; Han, Jeong Soo; Baek, Seong Hyun; Choi, Gap Chu [Chonbuk National University, Chonju (Korea, Republic of)
1996-07-01
The utilization of remote-control robot system in atomic power plants or nuclear-related facilities grows rapidly, to protect workers from high radiation environments. Such applications require complete stability of the robot system, then precisely tracking the robot is essential for the whole system. This research is to accomplish the goal by developing appropriate algorithms for remote-control robot systems. The research consists of two different approaches: target-tracking systems using kalman filters and neural networks. The tracking system under study uses vision sensors to obtain features of targets. A kalman filter model using the moving-position estimation technique is designed, and tested for tracking an object with a circle movement. Attributions of the tracking object are investigated and best features are extracted from the input imagery for the kalman filter model. A neural network tracking system is designed and experimented to trace a robot endeffector. This model is aimed to utilize the excellent capabilities of neural networks; nonlinear mapping between inputs and outputs, learning capability, and generalization capability. The neural tracker consists of two networks for position detection and prediction. Tracking algorithms are developed and experimented for the two models. Results to the experiments show that both models are promising as real-time target-tracking systems for remote-control robot systems. 20 refs., 34 figs. (author)
Directory of Open Access Journals (Sweden)
Bing Luo
2012-07-01
Full Text Available COMPASS is an indigenously developed Chinese global navigation satellite system and will share many features in common with GPS (Global Positioning System. Since the ultra-tight GPS/INS (Inertial Navigation System integration shows its advantage over independent GPS receivers in many scenarios, the federated ultra-tight COMPASS/INS integration has been investigated in this paper, particularly, by proposing a simplified prefilter model. Compared with a traditional prefilter model, the state space of this simplified system contains only carrier phase, carrier frequency and carrier frequency rate tracking errors. A two-quadrant arctangent discriminator output is used as a measurement. Since the code tracking error related parameters were excluded from the state space of traditional prefilter models, the code/carrier divergence would destroy the carrier tracking process, and therefore an adaptive Kalman filter algorithm tuning process noise covariance matrix based on state correction sequence was incorporated to compensate for the divergence. The federated ultra-tight COMPASS/INS integration was implemented with a hardware COMPASS intermediate frequency (IF, and INS’s accelerometers and gyroscopes signal sampling system. Field and simulation test results showed almost similar tracking and navigation performances for both the traditional prefilter model and the proposed system; however, the latter largely decreased the computational load.
Luo, Yong; Wu, Wenqi; Babu, Ravindra; Tang, Kanghua; Luo, Bing
2012-01-01
COMPASS is an indigenously developed Chinese global navigation satellite system and will share many features in common with GPS (Global Positioning System). Since the ultra-tight GPS/INS (Inertial Navigation System) integration shows its advantage over independent GPS receivers in many scenarios, the federated ultra-tight COMPASS/INS integration has been investigated in this paper, particularly, by proposing a simplified prefilter model. Compared with a traditional prefilter model, the state space of this simplified system contains only carrier phase, carrier frequency and carrier frequency rate tracking errors. A two-quadrant arctangent discriminator output is used as a measurement. Since the code tracking error related parameters were excluded from the state space of traditional prefilter models, the code/carrier divergence would destroy the carrier tracking process, and therefore an adaptive Kalman filter algorithm tuning process noise covariance matrix based on state correction sequence was incorporated to compensate for the divergence. The federated ultra-tight COMPASS/INS integration was implemented with a hardware COMPASS intermediate frequency (IF), and INS's accelerometers and gyroscopes signal sampling system. Field and simulation test results showed almost similar tracking and navigation performances for both the traditional prefilter model and the proposed system; however, the latter largely decreased the computational load.
Kalman filtering and Standard Quantum Limits for broadband measurement
Mabuchi, H
1998-01-01
I utilize the Caves-Milburn model for continuous position measurements to formulate a broadband version of the Standard Quantum Limit (SQL) for monitoring the position of a free mass, and illustrate the use of Kalman filtering to recover the SQL for estimating a weak classical force that acts on a quantum-mechanical test particle under continuous observation.
Performance enhancement for GPS positioning using constrained Kalman filtering
Guo, Fei; Zhang, Xiaohong; Wang, Fuhong
2015-08-01
Over the past decades Kalman filtering (KF) algorithms have been extensively investigated and applied in the area of kinematic positioning. In the application of KF in kinematic precise point positioning (PPP), it is often the case where some known functional or theoretical relations exist among the unknown state parameters, which can be and should be made use of to enhance the performance of kinematic PPP, especially in an urban and forest environment. The central task of this paper is to effectively blend the commonly used GNSS data and internal/external additional constrained information to generate an optimal PPP solution. This paper first investigates the basic algorithm of constrained Kalman filtering. Then two types of PPP model with speed constraints and trajectory constraints, respectively, are proposed. Further validation tests based on a variety of situations show that the positioning performances (positioning accuracy, reliability and continuity) from the constrained Kalman filter are significantly superior to those from the conventional Kalman filter, particularly under extremely poor observation conditions.
Data assimilation in integrated hydrological modeling using ensemble Kalman filtering
DEFF Research Database (Denmark)
Rasmussen, Jørn; Madsen, H.; Jensen, Karsten Høgh
2015-01-01
Groundwater head and stream discharge is assimilated using the ensemble transform Kalman filter in an integrated hydrological model with the aim of studying the relationship between the filter performance and the ensemble size. In an attempt to reduce the required number of ensemble members...
A Comparison of Ensemble Kalman Filters for Storm Surge Assimilation
Altaf, Muhammad
2014-08-01
This study evaluates and compares the performances of several variants of the popular ensembleKalman filter for the assimilation of storm surge data with the advanced circulation (ADCIRC) model. Using meteorological data from Hurricane Ike to force the ADCIRC model on a domain including the Gulf ofMexico coastline, the authors implement and compare the standard stochastic ensembleKalman filter (EnKF) and three deterministic square root EnKFs: the singular evolutive interpolated Kalman (SEIK) filter, the ensemble transform Kalman filter (ETKF), and the ensemble adjustment Kalman filter (EAKF). Covariance inflation and localization are implemented in all of these filters. The results from twin experiments suggest that the square root ensemble filters could lead to very comparable performances with appropriate tuning of inflation and localization, suggesting that practical implementation details are at least as important as the choice of the square root ensemble filter itself. These filters also perform reasonably well with a relatively small ensemble size, whereas the stochastic EnKF requires larger ensemble sizes to provide similar accuracy for forecasts of storm surge.
Forecasting with the Standardized Self-Perturbed Kalman Filter
DEFF Research Database (Denmark)
Grassi, Stefano; Nonejad, Nima; Santucci de Magistris, Paolo
compared to other on-line, classical and Bayesian methods. The standardized self-perturbed Kalman filter is adopted to forecast the equity premium on the S&P500 index under several model specifications, and to investigate to what extent and how realized variance can be exploited to predict excess returns....
Longitudinal Factor Score Estimation Using the Kalman Filter.
Oud, Johan H.; And Others
1990-01-01
How longitudinal factor score estimation--the estimation of the evolution of factor scores for individual examinees over time--can profit from the Kalman filter technique is described. The Kalman estimates change more cautiously over time, have lower estimation error variances, and reproduce the LISREL program latent state correlations more…
Data assimilation in integrated hydrological modeling using ensemble Kalman filtering
DEFF Research Database (Denmark)
Rasmussen, Jørn; Madsen, H.; Jensen, Karsten Høgh;
2015-01-01
Groundwater head and stream discharge is assimilated using the ensemble transform Kalman filter in an integrated hydrological model with the aim of studying the relationship between the filter performance and the ensemble size. In an attempt to reduce the required number of ensemble members...
Iterated unscented Kalman filter for phase unwrapping of interferometric fringes.
Xie, Xianming
2016-08-22
A fresh phase unwrapping algorithm based on iterated unscented Kalman filter is proposed to estimate unambiguous unwrapped phase of interferometric fringes. This method is the result of combining an iterated unscented Kalman filter with a robust phase gradient estimator based on amended matrix pencil model, and an efficient quality-guided strategy based on heap sort. The iterated unscented Kalman filter that is one of the most robust methods under the Bayesian theorem frame in non-linear signal processing so far, is applied to perform simultaneously noise suppression and phase unwrapping of interferometric fringes for the first time, which can simplify the complexity and the difficulty of pre-filtering procedure followed by phase unwrapping procedure, and even can remove the pre-filtering procedure. The robust phase gradient estimator is used to efficiently and accurately obtain phase gradient information from interferometric fringes, which is needed for the iterated unscented Kalman filtering phase unwrapping model. The efficient quality-guided strategy is able to ensure that the proposed method fast unwraps wrapped pixels along the path from the high-quality area to the low-quality area of wrapped phase images, which can greatly improve the efficiency of phase unwrapping. Results obtained from synthetic data and real data show that the proposed method can obtain better solutions with an acceptable time consumption, with respect to some of the most used algorithms.
Kalman filter techniques for accelerated Cartesian dynamic cardiac imaging.
Feng, Xue; Salerno, Michael; Kramer, Christopher M; Meyer, Craig H
2013-05-01
In dynamic MRI, spatial and temporal parallel imaging can be exploited to reduce scan time. Real-time reconstruction enables immediate visualization during the scan. Commonly used view-sharing techniques suffer from limited temporal resolution, and many of the more advanced reconstruction methods are either retrospective, time-consuming, or both. A Kalman filter model capable of real-time reconstruction can be used to increase the spatial and temporal resolution in dynamic MRI reconstruction. The original study describing the use of the Kalman filter in dynamic MRI was limited to non-Cartesian trajectories because of a limitation intrinsic to the dynamic model used in that study. Here the limitation is overcome, and the model is applied to the more commonly used Cartesian trajectory with fast reconstruction. Furthermore, a combination of the Kalman filter model with Cartesian parallel imaging is presented to further increase the spatial and temporal resolution and signal-to-noise ratio. Simulations and experiments were conducted to demonstrate that the Kalman filter model can increase the temporal resolution of the image series compared with view-sharing techniques and decrease the spatial aliasing compared with TGRAPPA. The method requires relatively little computation, and thus is suitable for real-time reconstruction.
Directory of Open Access Journals (Sweden)
O. Jakubov
2013-09-01
Full Text Available Common techniques for position-velocity-time estimation in satellite navigation, iterative least squares and the extended Kalman filter, involve matrix operations. The matrix inversion and inclusion of a matrix library pose requirements on a computational power and operating platform of the navigation processor. In this paper, we introduce a novel distributed algorithm suitable for implementation in simple parallel processing units each for a tracked satellite. Such a unit performs only scalar sum, subtraction, multiplication, and division. The algorithm can be efficiently implemented in hardware logic. Given the fast position-velocity-time estimator, frequent estimates can foster dynamic performance of a vector tracking receiver. The algorithm has been designed from a factor graph representing the extended Kalman filter by splitting vector nodes into scalar ones resulting in a cyclic graph with few iterations needed. Monte Carlo simulations have been conducted to investigate convergence and accuracy. Simulation case studies for a vector tracking architecture and experimental measurements with a real-time software receiver developed at CTU in Prague were conducted. The algorithm offers compromises in stability, accuracy, and complexity depending on the number of iterations. In scenarios with a large number of tracked satellites, it can outperform the traditional methods at low complexity.
Optimal Tuner Selection for Kalman-Filter-Based Aircraft Engine Performance Estimation
Simon, Donald L.; Garg, Sanjay
2011-01-01
An emerging approach in the field of aircraft engine controls and system health management is the inclusion of real-time, onboard models for the inflight estimation of engine performance variations. This technology, typically based on Kalman-filter concepts, enables the estimation of unmeasured engine performance parameters that can be directly utilized by controls, prognostics, and health-management applications. A challenge that complicates this practice is the fact that an aircraft engine s performance is affected by its level of degradation, generally described in terms of unmeasurable health parameters such as efficiencies and flow capacities related to each major engine module. Through Kalman-filter-based estimation techniques, the level of engine performance degradation can be estimated, given that there are at least as many sensors as health parameters to be estimated. However, in an aircraft engine, the number of sensors available is typically less than the number of health parameters, presenting an under-determined estimation problem. A common approach to address this shortcoming is to estimate a subset of the health parameters, referred to as model tuning parameters. The problem/objective is to optimally select the model tuning parameters to minimize Kalman-filterbased estimation error. A tuner selection technique has been developed that specifically addresses the under-determined estimation problem, where there are more unknown parameters than available sensor measurements. A systematic approach is applied to produce a model tuning parameter vector of appropriate dimension to enable estimation by a Kalman filter, while minimizing the estimation error in the parameters of interest. Tuning parameter selection is performed using a multi-variable iterative search routine that seeks to minimize the theoretical mean-squared estimation error of the Kalman filter. This approach can significantly reduce the error in onboard aircraft engine parameter estimation
An optimal algorithm based on extended kalman filter and the data fusion for infrared touch overlay
Zhou, AiGuo; Cheng, ShuYi; Pan, Qiang Biao; Sun, Dong Yu
2016-01-01
Current infrared touch overlay has problems on the touch point recognition which bring some burrs on the touch trajectory. This paper uses the target tracking algorithm to improve the recognition and smoothness of infrared touch overlay. In order to deal with the nonlinear state estimate problem for touch point tracking, we use the extended Kalman filter in the target tracking algorithm. And we also use the data fusion algorithm to match the estimate value with the original target trajectory. The experimental results of the infrared touch overlay demonstrate that the proposed target tracking approach can improve the touch point recognition of the infrared touch overlay and achieve much smoother tracking trajectory than the existing tracking approach.
DEFF Research Database (Denmark)
Vedel-Larsen, Esben; Fuglø, Jacob; Channir, Fouad;
2010-01-01
, are variable and depend on cognitive function. This study compares the performance of a simplified Kalman filter with Sliding Window Averaging in tracking dynamical changes in single trial P300. The comparison is performed on simulated P300 data with added background noise consisting of both simulated and real...... background EEG in various input signal to noise ratios. While both methods can be applied to track dynamical changes, the simplified Kalman filter has an advantage over the Sliding Window Averaging, most notable in a better noise suppression when both are optimized for faster changing latency and amplitude...
Institute of Scientific and Technical Information of China (English)
李茜; 贾旭东; 马寅峰; 崔敏; 王高; 杨磊
2011-01-01
针对陀螺存在随时间累积漂移误差的特性造成卡尔曼滤波数据发散的问题,提出以陀螺与磁强计组合为测量手段,小波变换和卡尔曼滤波相结合的方法.该方法由卡尔曼滤波器获得较为准确的测量信息,对陀螺和磁强计的信息分别在尺度3下进行分解,比较每层的细节系数和近似部分的系数获得误差信号,结合BP神经网络建立误差模型.当测量数据发散时,选用模型的估计值修正卡尔曼滤波测量值.实验结果比传统卡尔曼滤波算法精度提高了2°,能有效提高姿态测量的精度.%To prevent data divergence of the gyro caused by drift error in Kalman filtering, a method was put forward which taking the gyro and magnetometer as measurement instruments by combining the Kalman filtering with wavelet transform. The relatively accurate measurement information was obtained through the Kalman filter, and the. Information of the gyro and the magnetometer was decomposed under the three dimensions. The error signal was obtained by comparing each level's coefficient in detail part and the approximate part, and the error model was built up based on BP neural network. When the data was diverging, the estimated value of the model was used to replace the measured value of the Kalman filter. The simulation result indicated that the measurement accuracy of the method is 2° higher than the traditional Kalman algorithm, and the attitude measurement precision can be improved effectively.
Passive Target Tracking in Non-cooperative Radar System Based on Particle Filtering
Institute of Scientific and Technical Information of China (English)
LI Shuo; TAO Ran
2006-01-01
We propose a target tracking method based on particle filtering(PF) to solve the nonlinear non-Gaussian target-tracking problem in the bistatic radar systems using external radiation sources. Traditional nonlinear state estimation method is extended Kalman filtering (EKF), which is to do the first level Taylor series extension. It will cause an inaccuracy or even a scatter estimation result on condition that there is either a highly nonlinear target or a large noise square-error. Besides, Kalman filtering is the optimal resolution under a Gaussian noise assumption, and is not suitable to the non-Gaussian condition. PF is a sort of statistic filtering based on Monte Carlo simulation that is using some random samples (particles) to simulate the posterior probability density of system random variables. This method can be used in any nonlinear random system. It can be concluded through simulation that PF can achieve higher accuracy than the traditional EKF.