WorldWideScience

Sample records for just in time production

  1. A Review of Just-In-Time Scheduling for Production and Logistics

    田村, 隆善

    1999-01-01

    The Just-In-Time (JIT) production has been developed as a subsystem of the "whole" Toyota production system (TPS). Currently JIT or JIT production means the TPS especially in foreign countries. It is recognized that JIT is a key concept for enterprises competing in the diversified-products market. The technologies used in JIT are comprehensive and include technologies to design, install and control a production system, which are classified into three categories : hardware, information and sof...

  2. Just-in-Time Teaching

    Novak, Gregor M.

    2011-01-01

    This chapter provides an overview and implementation guidelines of Just-in-Time Teaching (JiTT), an interactive engagement pedagogy used across disciplines and across the academy, now in its fourteenth year. The heart of JiTT pedagogy is Web-based pre-instruction assignments called warm-ups, with some colorful local variations, such as GeoBytes in…

  3. Quality of Just-in-Time Requirements : Just-Enough and Just-in-Time

    Heck, P.M.

    2016-01-01

    The goal of this thesis was to obtain a deeper understanding of the notion of quality for Just-in-Time (JIT) Requirements. JIT requirements are the opposite of up-front requirements. JIT requirements are not analyzed or defined until they are needed meaning that development is allowed to begin with

  4. Just-in-Time Support

    Rollins, Suzy Pepper

    2016-01-01

    Most students have gaps in their background knowledge and basic skills-gaps that can stand in the way of learning new concepts. For example, a student may be excited about studying probability--until he realizes that today's lesson on probability will require him to use fractions. As his brain searches frantically for his dim recollection of the…

  5. DOBAVA "JUST IN TIME" PROIZVAJALCU AVTOMOBILOV RENAULT

    Nemanič, Marjana

    2010-01-01

    Diplomsko delo je sestavljeno iz uvoda, teoretičnega in praktičnega dela. V uvodu je opredeljeno področje, ki je predmet raziskave, namen in cilji, osnovne trditve, predpostavke, omejitve raziskave in predvidene metode raziskovanja. Teoretični del opisuje logistične procese, dobavo »just in time«, elektronsko izmenjavo podatkov (EDI), logistične procese v SAP. V ožjem pomenu pomeni dobava »just in time« dobavo ravno ob pravem času. Širše pa pomeni obvladovanje poslovnih procesov v vsakem ...

  6. Just-in-time - Its Fingerprint on Structures in Production Systems

    Christiansen, Thomas Bøhm

    1998-01-01

    s saw JIT at Toyota. This description is hold up agains Hayes and Wheelwright’s ramework with eight decision categories, and by this it is seen where differences exist, and what the implications has been for present days production systems. This paper, though, is only the first half of a complete...

  7. Just-in-time elements and benefits

    García-Alcaraz, Jorge Luis

    2016-01-01

    This book reports the elements required for implementing Just in Time (JIT) technique in companies. The main reasons for low implementation processes and the main benefits from the successful implementation of them are highlighted in this book. Structural equation models are presented to help identify the essential elements in JIT.

  8. SURVEY - Multicriteria Models for Just-in-Time Scheduling

    T'Kindt , Vincent

    2010-01-01

    Abstract Just-in-Time manufacturing consists in organizing the production of elements in order to meet a certain number of objectives or requirements according to the so-called ?Just-in-Time philosophy?. Just-in-Time has been extensively studied in the literature for many years due to the high number of real-life situations where it can be applied. This paper aims at revisiting Just-in-Time principles and detailing how they can be applied to the scheduling stage of a manufacturi...

  9. BIM-Integrated Construction Operation Simulation for Just-In-Time Production Management

    WoonSeong Jeong

    2016-10-01

    Full Text Available Traditional construction planning, which depends on historical data and heuristic modification, prevents the integration of managerial details such as productivity dynamics. Specifically, the distance between planning and execution brings cost overruns and duration extensions. To minimize variations, this research presents a Building Information Modeling (BIM-integrated simulation framework for predicting productivity dynamics at the construction planning phase. To develop this framework, we examined critical factors affecting productivity at the operational level, and then forecast the productivity dynamics. The resulting plan includes specific commands for retrieving the required information from BIM and executing operation simulations. It consists of the following steps: (1 preparing a BIM model to produce input data; (2 composing a construction simulation at the operational level; and (3 obtaining productivity dynamics from the BIM-integrated simulation. To validate our framework, we applied it to a structural steel model; this was due to the significance of steel erections. By integrating BIM with construction operation simulations, we were able to create reliable construction plans that adapted to project changes. Our results show that the developed framework facilitates the reliable prediction of productivity dynamics, and can contribute to improved schedule reliability, optimized resource allocation, cost savings associated with buffers, and reduced material waste.

  10. Just in Time to Flip Your Classroom

    Lasry, Nathaniel; Dugdale, Michael; Charles, Elizabeth

    2013-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention. We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet, it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students for class. We set out to effectively move some of our course content outside of class and decided to tweak the Just-in-Time-Teaching approach (JiTT). To ...

  11. Just in Time to Flip Your Classroom

    Lasry, Nathaniel; Dugdale, Michael; Charles, Elizabeth

    2014-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention.2 We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students for class. We set out to effectively move some of our course content outside of class and decided to tweak the Just-in-Time Teaching approach (JiTT).3 To our surprise, this tweak—which we like to call the flip-JiTT—ended up completely flipping our classroom. What follows is narrative of our experience and a procedure that any teacher can use to extend JiTT to a flipped classroom.

  12. Penerapan Just in Time dalam Sistem Pembelian dan Sistem Produksi

    Heri Sukendar W.

    2011-05-01

    Full Text Available Just in Time is a management philosophy, techniques, or methods be comprehensive in order to buy raw materials and producing goods only when necessary and timely to be used at every stage we have available. Research was conducted by doing library research. Many problems faced by the industry, especially the existence of inefficiency in the system of purchasing and production. With the implementation of Just in Time, then the problem can be overcome and eventually going savings that will increase corporate profits. 

  13. The implementation of Just In Time manufacturing through team leaders

    Carr, P. D.

    1995-01-01

    This thesis examines the implementation of Just In Time manufacturing through team leaders. Western industry has failed to achieve the performance benefits experienced in Japan with the introduction of Just In Time, a manufacturing system based on the relentless elimination of waste. Criticism is emerging of the experience of employees of Just In Time. It is argued that stress levels are high and motivation is low. However, Just In Time relies on a new, more active, role for em...

  14. Towards Just-In-Time Partial Evaluation of Prolog

    Bolz, Carl Friedrich; Leuschel, Michael; Rigo, Armin

    We introduce a just-in-time specializer for Prolog. Just-in-time specialization attempts to unify of the concepts and benefits of partial evaluation (PE) and just-in-time (JIT) compilation. It is a variant of PE that occurs purely at runtime, which lazily generates residual code and is constantly driven by runtime feedback.

  15. IMPLEMENTASI JUST IN TIME DALAM MENINGKATKATKAN PRODUKTIVITAS EFISIENSI BIAYA PRODUKSI

    Luqman Hakim

    2016-02-01

    Full Text Available The purpose of Just In Time (JIT is to increase productivity and reduce production costs by eliminating dissipation that exist in the company through continuous improvement activities, and the purpose of this study was to determine the implementation of JIT in increasing productivity and cost efficiency of production in manufacturing companies. The research stages research are 1 identify problems 2 data used in this research are quantitative data and qualitative data, 3 the collection and processing of production and purchasing data, 4 the implementation of JIT system, 5 eliminate the dissipation and the available participation of employees, 6 reduce or eliminate defect products. The results of this research indicate that the implementation of JIT can improve company productivity and efficiency of the production costs.

  16. The transportation economy : just in time.

    2012-07-01

    The purpose of this project was to produce a short educational video, targeted at middle school and high school students, illustrating the critical role transportation plays in our modern economy. This report documents the production of a 6.5-minute ...

  17. PENGGUNAAN KANBAN DALAM METODE JUST IN TIME PADA PRODUKSI

    Hendra Achmadi

    2008-10-01

    Full Text Available Competition among textile companies is very heavy, especially when dealing with the WTC event in America. This caused a hard shock for the textile companies in Indonesia because many textile companies must divert their focus to local market. As we know, if most of textile companies divert their attention to domestic market, the next problem will happen is more companies entering to local or domestic market, so that more increasing the competition among textile companies. Competition occurs is price competition so that textile companies must continuously introspect themselves so they can compete, and the next is time. In an increasingly competitive world now caused it needs a new breakthrough, in time of samples creating and also textile production itself. The production amount resulted per day is large so that it must be absorbed by market. They can be marketed through a hypermarket or a traditional market. Therefore, the use of information technology is very useful for winning the competition among textile mill. Because the work of the textile industry also must obtain a new order that is done, it needs to make an existing production model of the new order (Just In Time; made to reduce the amount of stock that is stored, it will follow the Japanese style, which is called the Kanban system. In this system, the new company will produce if there is order.Keywords: kanban, textiles, just in time

  18. Just-in-time : on strategy annotations

    J.C. van de Pol (Jaco)

    2001-01-01

    textabstractA simple kind of strategy annotations is investigated, giving rise to a class of strategies, including leftmost-innermost. It is shown that under certain restrictions, an interpreter can be written which computes the normal form of a term in a bottom-up traversal. The main contribution

  19. Just in Time to Flip Your Classroom

    Lasry, Nathaniel; Dugdale, Michael; Charles, Elizabeth

    2014-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention. We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students…

  20. Interdisciplinary just-in-time teaching

    Christensen, Hans Peter

    2008-01-01

    An active learning methodology in engineering education has been developed based on general pedagogical principles adapted to a mixed student group including students from a population with little tradition for higher education. So far it has been successful with engaged students and teachers...

  1. Just in Time Teaching: A Strategy to Encourage Students’ Engagement

    Lorena Andrea López Cupita

    2016-01-01

    This qualitative research study was carried out with two groups of students at a beginner English level; the students were in the fourth semester of psychology at a Colombian university. The overall aim of this action research study was to analyze learners’ perceptions of the strategy Just in Time Teaching in a web 2.0. The data were collected through students’ artifacts, journals, and interviews. Results of this study indicate that students perceived the strategy of Just in Time Teaching as ...

  2. Selective, Embedded, Just-In-Time Specialization (SEJITS): Portable Parallel Performance from Sequential, Productive, Embedded Domain-Specific Languages

    2012-12-01

    approaches to speaker diarization become fast enough to obviate further research in offline approaches. (We have not yet investigated what components of the...Evans, Corinne Fredouille, G Friedland, and O Vinyals. Speaker diarization : A review of recent research. Accepted for publication in ”IEEE Transactions...implementation from [32]. (b) Diarizer application performance as a multiple of real time; “100×” means that 1 second of audio can be processed in 1/100

  3. Just in Time as a Logistical Supply Concept

    Gregor Veselko

    2006-07-01

    Full Text Available Recent developments have shown revolutionary progress inthe areas of information technology, logistical science andinternationalisation of business. These facts and the elementsinvolved strongly influence the methods of production and provisionof services thanks to an i"epressibly growing speed ofdata and information transfer and surmounting the culturaland geographical obstacles, which has given rise to new conceptsof business process optimisation in overcoming the distancein space and time. The result of that development weretwo concepts in the business world, the Just in Time (J!T conceptand its integral part "Quick Response': whose origins arein the Far East, in Japan, in the automotive industry. Thebreak-through of these concepts and their fast spreading toother spheres of the world economy can be attributed to theiroverwhelming efficiency. Both concepts aim to release the capitaltied in inventories, and to reduce them, avoiding thus anysurplus inventories.

  4. Just in Time Teaching: A Strategy to Encourage Students’ Engagement

    Lorena Andrea López Cupita

    2016-10-01

    Full Text Available This qualitative research study was carried out with two groups of students at a beginner English level; the students were in the fourth semester of psychology at a Colombian university. The overall aim of this action research study was to analyze learners’ perceptions of the strategy Just in Time Teaching in a web 2.0. The data were collected through students’ artifacts, journals, and interviews. Results of this study indicate that students perceived the strategy of Just in Time Teaching as a means to engage them in the designed activities; it was manifested by investing time to extend knowledge and promoting participation by reducing the affective filter.

  5. Just in Time Research: Data Breaches in Higher Education

    Grama, Joanna

    2014-01-01

    This "Just in Time" research is in response to recent discussions on the EDUCAUSE Higher Education Information Security Council (HEISC) discussion list about data breaches in higher education. Using data from the Privacy Rights Clearinghouse, this research analyzes data breaches attributed to higher education. The results from this…

  6. Just-In-Time Inventory: Proceed with caution exclamation point

    Katterhenry, W.E.

    1995-01-01

    Today's economic climate, the emerging of independent power producers, pending deregulation, and environmental restraints are forcing the utility industry to adopt cost cutting measures in an effort to be more competitive and survive in tomorrow's market place. The cost cutting measure addressed in this paper is ''Just-In-Time Inventory'' of coal for fossil fueled power plants

  7. Just-In-Time Inventory: Proceed with caution!

    Katterhenry, W.E. [Katterhenry and Associates, Inc., Naperville, IL (United States)

    1995-10-01

    Today`s economic climate, the emerging of independent power producers, pending deregulation, and environmental restraints are forcing the utility industry to adopt cost cutting measures in an effort to be more competitive and survive in tomorrow`s market place. The cost cutting measure addressed in this paper is ``Just-In-Time Inventory`` of coal for fossil fueled power plants.

  8. Radiologists' preferences for just-in-time learning.

    Kahn, Charles E; Ehlers, Kevin C; Wood, Beverly P

    2006-09-01

    Effective learning can occur at the point of care, when opportunities arise to acquire information and apply it to a clinical problem. To assess interest in point-of-care learning, we conducted a survey to explore radiologists' attitudes and preferences regarding the use of just-in-time learning (JITL) in radiology. Following Institutional Review Board approval, we invited 104 current radiology residents and 86 radiologists in practice to participate in a 12-item Internet-based survey to assess their attitudes toward just-in-time learning. Voluntary participation in the survey was solicited by e-mail; respondents completed the survey on a web-based form. Seventy-nine physicians completed the questionnaire, including 47 radiology residents and 32 radiologists in practice; the overall response rate was 42%. Respondents generally expressed a strong interest for JITL: 96% indicated a willingness to try such a system, and 38% indicated that they definitely would use a JITL system. They expressed a preference for learning interventions of 5-10 min in length. Current and recent radiology trainees have expressed a strong interest in just-in-time learning. The information from this survey should be useful in pursuing the design of learning interventions and systems for delivering just-in-time learning to radiologists.

  9. Just in Time Teaching: A Strategy to Encourage Students' Engagement

    López Cupita, Lorena Andrea

    2016-01-01

    This qualitative research study was carried out with two groups of students at a beginner English level; the students were in the fourth semester of psychology at a Colombian university. The overall aim of this action research study was to analyze learners' perceptions of the strategy "Just in Time Teaching" in a web 2.0. The data were…

  10. Refrigerator doors just-in-time; Kuehlschrank-Tueren just-in-time

    Salinas, F.R.

    1994-12-31

    Flexibility today is not only demanded with respect to any given different component types, but also for future model modifications and consecutive productions. Even the smallest batch sizes must be produced economically. These requirements are also made as to stamped product technology. (orig.) [Deutsch] Flexibilitaet wird heute nicht nur hinsichtlich vorgegebener unterschiedlicher Werkstueck-Typen gefordert, sondern auch fuer kuenftige Modellergaenzungen und nachfolgende Fertigungen. Dazu sollen moeglichst kleinste Losgroessen wirtschaftlich sein. Diese Forderungen werden auch an die Stanzereitechnik gestellt. (orig.)

  11. Just In-Time Maintenance of Nuclear Power Plants

    Parlos, Alexander G.

    2002-01-01

    The goal of this project has been to develop and demonstrate the feasibility of a new technology for maintenance engineering: a Just-In-Time Maintenance (JITM) system for rotating machines. The JITM system is based on several key developments at Texas A and M over the past ten years in emerging intelligent information technologies, which if integrated into a single system could provide a revolutionary approach in the way maintenance is performed. Rotating machines, such as induction motors, range from a few horse power (hp) to several thousand hp in size, and they are widely used in nuclear power plants and in other industries. Forced outages caused by induction motor failures are the reason for as much as 15% - 40% of production costs to be attributable to maintenance, whereas plant shutdowns caused by induction motor failures result in daily financial losses to the utility and process industries of $1 M or more. The basic components of the JITM system are the available machine sensors, that is electric current sensors and accelerometers, and the computational algorithms used in the analysis and interpretation of the occurring incipient failures. The JITM system can reduce the costs attributable to maintenance by about 40% and it can lower the maintenance budgets of power and process plants by about 35%, while requiring no additional sensor installation. As a result, the JITM system can improve the competitiveness of US nuclear utilities at minimal additional cost

  12. Just In-Time Maintenance of Nuclear Power Plants

    DR. Alexander G. Parlos

    2002-01-22

    The goal of this project has been to develop and demonstrate the feasibility of a new technology for maintenance engineering: a Just-In-Time Maintenance (JITM) system for rotating machines. The JITM system is based on several key developments at Texas A and M over the past ten years in emerging intelligent information technologies, which if integrated into a single system could provide a revolutionary approach in the way maintenance is performed. Rotating machines, such as induction motors, range from a few horse power (hp) to several thousand hp in size, and they are widely used in nuclear power plants and in other industries. Forced outages caused by induction motor failures are the reason for as much as 15% - 40% of production costs to be attributable to maintenance, whereas plant shutdowns caused by induction motor failures result in daily financial losses to the utility and process industries of $1 M or more. The basic components of the JITM system are the available machine sensors, that is electric current sensors and accelerometers, and the computational algorithms used in the analysis and interpretation of the occurring incipient failures. The JITM system can reduce the costs attributable to maintenance by about 40% and it can lower the maintenance budgets of power and process plants by about 35%, while requiring no additional sensor installation. As a result, the JITM system can improve the competitiveness of US nuclear utilities at minimal additional cost.

  13. Just-in-time Database-Driven Web Applications

    2003-01-01

    "Just-in-time" database-driven Web applications are inexpensive, quickly-developed software that can be put to many uses within a health care organization. Database-driven Web applications garnered 73873 hits on our system-wide intranet in 2002. They enabled collaboration and communication via user-friendly Web browser-based interfaces for both mission-critical and patient-care-critical functions. Nineteen database-driven Web applications were developed. The application categories that comprised 80% of the hits were results reporting (27%), graduate medical education (26%), research (20%), and bed availability (8%). The mean number of hits per application was 3888 (SD = 5598; range, 14-19879). A model is described for just-in-time database-driven Web application development and an example given with a popular HTML editor and database program. PMID:14517109

  14. Just-In-Time compilation of OCaml byte-code

    Meurer, Benedikt

    2010-01-01

    This paper presents various improvements that were applied to OCamlJIT2, a Just-In-Time compiler for the OCaml byte-code virtual machine. OCamlJIT2 currently runs on various Unix-like systems with x86 or x86-64 processors. The improvements, including the new x86 port, are described in detail, and performance measures are given, including a direct comparison of OCamlJIT2 to OCamlJIT.

  15. HOPE: Just-in-time Python compiler for astrophysical computations

    Akeret, Joel; Gamper, Lukas; Amara, Adam; Refregier, Alexandre

    2014-11-01

    HOPE is a specialized Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimization on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. By using HOPE, the user benefits from being able to write common numerical code in Python while getting the performance of compiled implementation.

  16. Just-in-time automated counseling for physical activity promotion.

    Bickmore, Timothy; Gruber, Amanda; Intille, Stephen

    2008-11-06

    Preliminary results from a field study into the efficacy of automated health behavior counseling delivered at the moment of user decision-making compared to the same counseling delivered at the end of the day are reported. The study uses an animated PDA-based advisor with an integrated accelerometer that can engage users in dialogues about their physical activity throughout the day. Preliminary results indicate health counseling is more effective when delivered just-in-time than when delivered retrospectively.

  17. An Internet of Things based framework to enhance just-in-time manufacturing

    Xu, Yuchun; Chen, Mu

    2017-01-01

    Just-in-time manufacturing is a main manufacturing strategy used to enhance manufacturers’ competitiveness through inventory and lead time reduction. Implementing just-in-time manufacturing has a number of challenges, for example, effective, frequent and real-time information sharing and communication between different functional departments, responsive action for adjusting the production plan against the continually changing manufacturing situation. Internet of Things technology has the pote...

  18. Contabilidade gerencial como apoio ao "just in time"

    Costa, Sérgio De Carvalho

    2010-01-01

    Descreve as técnicas da filosofia "Just in Time" e apresenta as modificações necessárias aos Sistemas Gerencias para que se tornem coerentes com a filosofia JIT, bem como meçam adequadamente a melhoria contínua da Empresa. Critica tanto o Custeio' Direto como o Custeio por Absorção, apresentando como alternativa o Custeio "ABC". Mostra como o JIT facilita o Custeio dos Produtos e destaca os aspectos estratégicos da Avaliação de Desempenho. Finalmente discorre sobre um estudo de...

  19. Just in Time in Space or Space Based JIT

    VanOrsdel, Kathleen G.

    1995-01-01

    Our satellite systems are mega-buck items. In today's cost conscious world, we need to reduce the overall costs of satellites if our space program is to survive. One way to accomplish this would be through on-orbit maintenance of parts on the orbiting craft. In order to accomplish maintenance at a low cost I advance the hypothesis of having parts and pieces (spares) waiting. Waiting in the sense of having something when you need it, or just-in-time. The JIT concept can actually be applied to space processes. Its definition has to be changed just enough to encompass the needs of space. Our space engineers tell us which parts and pieces the satellite systems might be needing once in orbit. These items are stored in space for the time of need and can be ready when they are needed -- or Space Based JIT. When a system has a problem, the repair facility is near by and through human or robotics intervention, it can be brought back into service. Through a JIT process, overall system costs could be reduced as standardization of parts is built into satellite systems to facilitate reduced numbers of parts being stored. Launch costs will be contained as fewer spare pieces need to be included in the launch vehicle and the space program will continue to thrive even in this era of reduced budgets. The concept of using an orbiting parts servicer and human or robotics maintenance/repair capabilities would extend satellite life-cycle and reduce system replacement launches. Reductions of this nature throughout the satellite program result in cost savings.

  20. Just-in-time connectivity for large spiking networks.

    Lytton, William W; Omurtag, Ahmet; Neymotin, Samuel A; Hines, Michael L

    2008-11-01

    The scale of large neuronal network simulations is memory limited due to the need to store connectivity information: connectivity storage grows as the square of neuron number up to anatomically relevant limits. Using the NEURON simulator as a discrete-event simulator (no integration), we explored the consequences of avoiding the space costs of connectivity through regenerating connectivity parameters when needed: just in time after a presynaptic cell fires. We explored various strategies for automated generation of one or more of the basic static connectivity parameters: delays, postsynaptic cell identities, and weights, as well as run-time connectivity state: the event queue. Comparison of the JitCon implementation to NEURON's standard NetCon connectivity method showed substantial space savings, with associated run-time penalty. Although JitCon saved space by eliminating connectivity parameters, larger simulations were still memory limited due to growth of the synaptic event queue. We therefore designed a JitEvent algorithm that added items to the queue only when required: instead of alerting multiple postsynaptic cells, a spiking presynaptic cell posted a callback event at the shortest synaptic delay time. At the time of the callback, this same presynaptic cell directly notified the first postsynaptic cell and generated another self-callback for the next delay time. The JitEvent implementation yielded substantial additional time and space savings. We conclude that just-in-time strategies are necessary for very large network simulations but that a variety of alternative strategies should be considered whose optimality will depend on the characteristics of the simulation to be run.

  1. Just-in-time classifiers for recurrent concepts.

    Alippi, Cesare; Boracchi, Giacomo; Roveri, Manuel

    2013-04-01

    Just-in-time (JIT) classifiers operate in evolving environments by classifying instances and reacting to concept drift. In stationary conditions, a JIT classifier improves its accuracy over time by exploiting additional supervised information coming from the field. In nonstationary conditions, however, the classifier reacts as soon as concept drift is detected; the current classification setup is discarded and a suitable one activated to keep the accuracy high. We present a novel generation of JIT classifiers able to deal with recurrent concept drift by means of a practical formalization of the concept representation and the definition of a set of operators working on such representations. The concept-drift detection activity, which is crucial in promptly reacting to changes exactly when needed, is advanced by considering change-detection tests monitoring both inputs and classes distributions.

  2. Just-in-Time Retail Distribution : A Systems Perspective on Cross-Docking

    Buijs, Paul; Danhof, Hans W.; Wortmann, J.(Hans) C.

    2016-01-01

    Cross-docking is a just-in-time strategy for distribution logistics. It is aimed at reducing inventory levels and distribution lead times by creating a seamless flow of products from suppliers to customers. Prior supply chain literature has argued that creating such a seamless product flows requires

  3. Improving education: just-in-time splinting video.

    Wang, Vincent; Cheng, Yu-Tsun; Liu, Deborah

    2016-06-01

    Just-in-time training (JITT) is an emerging concept in medical procedural education, but with few studies to support its routine use. Providing a brief educational intervention in the form of a digital video immediately prior to patient care may be an effective method to reteach knowledge for procedural techniques learned previously. Paediatric resident physicians were taught to perform a volar splint in a small workshop setting. Subsequently, they were asked to demonstrate their splinting proficiency by performing a splint on another doctor. Proficiency was scored on a five-point assessment tool. After 2-12 months, participants were asked to demonstrate their splinting proficiency on one of the investigators, and were divided into the control group (no further instruction) and the intervention group, which viewed a 3-minute JITT digital video demonstrating the splinting technique prior to performing the procedure. Thirty subjects were enrolled between August 2012 and July 2013, and 29 of 30 completed the study. The retest splinting time was not significantly different, but if the JITT group included watching the video, the total time difference was statistically significant: 3.86 minutes (control) versus 7.07 minutes (JITT) (95% confidence interval: 2.20-3.90 minutes). The average assessment score difference was 1.87 points higher for the JITT group, which was a statistically significant difference (95% confidence interval: 1.00-3.00). Just-in-time training is an emerging concept in medical procedural education JITT seems to be an effective tool in medical education for reinforcing previously learned skills. JITT may offer other possibilities for enhancing medical education. © 2015 John Wiley & Sons Ltd.

  4. Chinese disasters and just-in-time education.

    Yang, Yingyun; Chen, Yanwen; Chotani, Rashid A; Laporte, Ronald E; Ardalan, Ali; Shubnikov, Eugene; Linkov, Fania; Huang, Jesse

    2010-01-01

    Just-in-time ( JIT) Educational Strategy has been applied successfully to share scientific knowledge about disasters in several countries. This strategy was introduced to China in 2008 with the hopes to quickly disseminate accurate scientific data to the population, and it was applied during the Sichuan Earthquake and Influenza A (H1N1) outbreak. Implementation of this strategy likely educated between 10,000 and 20,000,000 people. The efforts demonstrated that an effective JIT strategy impacted millions of people in China after a disaster occurs as a disaster mitigation education method. This paper describes the Chinese JIT approach, and discusses methodologies for implementing JIT lectures in the context of China's medical and public health system.

  5. [Just-in-time initiation of optimal dialysis].

    Cornelis, Tom; Kooman, Jeroen P; van der Sande, Frank M

    2010-01-01

    The IDEAL trial shows that the decision to start renal replacement treatment should not depend on GFR alone, but should be taken on the basis of clinical parameters. Quality of Life (QoL) questionnaires and bio-impedance analysis are potential tools for detecting subtle changes in the predialysis clinic. Too early an initiation of dialysis may be deleterious for the patient and the healthcare system. We are convinced that ESRD patients should be informed about intensive haemodialysis (HD), especially nocturnal (home) HD, as the best available dialysis modality. There is substantial evidence which shows that intensive HD improves clinical, biochemical and biological parameters, and may even prolong survival. We believe that 'just-in-time delivery of intensive haemodialysis' may result in optimised QoL and reduced economic burden.

  6. Just in Time DSA the Hanford Nuclear Safety Basis Strategy

    JACKSON, M.W.

    2002-06-01

    The U.S. Department of Energy, Richland Operations Office (RL) is responsible for 30 hazard category 2 and 3 nuclear facilities that are operated by its prime contractors, Fluor Hanford, Incorporated (FHI), Bechtel Hanford, Incorporated (BHI) and Pacific Northwest National Laboratory (PNNL). The publication of Title 10, Code of Federal Regulations, Part 830, Subpart B, Safely Basis Requirements (the Rule) in January 2001 requires that the Documented Safety Analyses (DSA) for these facilities be reviewed against the requirements of the Rule. Those DSAs that do not meet the requirements must either be upgraded to satisfy the Rule, or an exemption must be obtained. RL and its prime contractors have developed a Nuclear Safety Strategy that provides a comprehensive approach for supporting RL's efforts to meet its long-term objectives for hazard category 2 and 3 facilities while also meeting the requirements of the Rule. This approach will result in a reduction of the total number of safety basis documents that must be developed and maintained to support the remaining mission and closure of the Hanford Site and ensure that the documentation that must be developed will support: Compliance with the Rule; A ''Just-In-Time'' approach to development of Rule-compliant safety bases supported by temporary exemptions; and Consolidation of safety basis documents that support multiple facilities with a common mission (e.g. decontamination, decommissioning and demolition [DD&D], waste management, surveillance and maintenance). This strategy provides a clear path to transition the safety bases for the various Hanford facilities from support of operation and stabilization missions through DD&D to accelerate closure. This ''Just-In-Time'' Strategy can also be tailored for other DOE Sites, creating the potential for large cost savings and schedule reductions throughout the DOE complex.

  7. Just in Time DSA the Hanford Nuclear Safety Basis Strategy

    JACKSON, M.W.

    2002-01-01

    The U.S. Department of Energy, Richland Operations Office (RL) is responsible for 30 hazard category 2 and 3 nuclear facilities that are operated by its prime contractors, Fluor Hanford, Incorporated (FHI), Bechtel Hanford, Incorporated (BHI) and Pacific Northwest National Laboratory (PNNL). The publication of Title 10, Code of Federal Regulations, Part 830, Subpart B, Safely Basis Requirements (the Rule) in January 2001 requires that the Documented Safety Analyses (DSA) for these facilities be reviewed against the requirements of the Rule. Those DSAs that do not meet the requirements must either be upgraded to satisfy the Rule, or an exemption must be obtained. RL and its prime contractors have developed a Nuclear Safety Strategy that provides a comprehensive approach for supporting RL's efforts to meet its long-term objectives for hazard category 2 and 3 facilities while also meeting the requirements of the Rule. This approach will result in a reduction of the total number of safety basis documents that must be developed and maintained to support the remaining mission and closure of the Hanford Site and ensure that the documentation that must be developed will support: Compliance with the Rule; A ''Just-In-Time'' approach to development of Rule-compliant safety bases supported by temporary exemptions; and Consolidation of safety basis documents that support multiple facilities with a common mission (e.g. decontamination, decommissioning and demolition [DD and D], waste management, surveillance and maintenance). This strategy provides a clear path to transition the safety bases for the various Hanford facilities from support of operation and stabilization missions through DD and D to accelerate closure. This ''Just-In-Time'' Strategy can also be tailored for other DOE Sites, creating the potential for large cost savings and schedule reductions throughout the DOE complex

  8. Aplicaciones del Just-In-Time en la Argentina

    Enrique Yacuzzi; Carolina Fajntich; María Pía Romeo

    2013-01-01

    Este trabajo presenta el concepto de JIT (Just-In-Time, o justo a tiempo) y ofrece aplicaciones en la Argentina. En la Parte I, pone el JIT en el contexto de la gestión japonesa (management japonés): destaca las características de esta gestión, y resume su evolución a lo largo de las últimas décadas. Hace hincapié en la gestión de la producción y analiza los desafíos, críticas y las teorías de la convergencia con los sistemas occidentales que se han examinado a lo largo de los últimos 20 años...

  9. Quality Control Circles: A Vehicle for Just-in-Time Implementation.

    Sepehri, Mehran

    1985-01-01

    Explains just-in-time (JIT) material flow and production, a method of production designed to eliminate waste. Discusses why quality control circles work so well with a JIT system, and describes how several companies have made JIT work for them. (CT)

  10. Teaching undergraduate biomechanics with Just-in-Time Teaching.

    Riskowski, Jody L

    2015-06-01

    Biomechanics education is a vital component of kinesiology, sports medicine, and physical education, as well as for many biomedical engineering and bioengineering undergraduate programmes. Little research exists regarding effective teaching strategies for biomechanics. However, prior work suggests that student learning in undergraduate physics courses has been aided by using the Just-in-Time Teaching (JiTT). As physics understanding plays a role in biomechanics understanding, the purpose of study was to evaluate the use of a JiTT framework in an undergraduate biomechanics course. This two-year action-based research study evaluated three JiTT frameworks: (1) no JiTT; (2) mathematics-based JiTT; and (3) concept-based JiTT. A pre- and post-course assessment of student learning used the biomechanics concept inventory and a biomechanics concept map. A general linear model assessed differences between the course assessments by JiTT framework in order to evaluate learning and teaching effectiveness. The results indicated significantly higher learning gains and better conceptual understanding in a concept-based JiTT course, relative to a mathematics-based JiTT or no JiTT course structure. These results suggest that a course structure involving concept-based questions using a JiTT strategy may be an effective method for engaging undergraduate students and promoting learning in biomechanics courses.

  11. Climate Data Provenance Tracking for Just-In-Time Computation

    Fries, S.; Nadeau, D.; Doutriaux, C.; Williams, D. N.

    2016-12-01

    The "Climate Data Management System" (CDMS) was created in 1996 as part of the Climate Data Analysis Tools suite of software. It provides a simple interface into a wide variety of climate data formats, and creates NetCDF CF-Compliant files. It leverages the NumPy framework for high performance computation, and is an all-in-one IO and computation package. CDMS has been extended to track manipulations of data, and trace that data all the way to the original raw data. This extension tracks provenance about data, and enables just-in-time (JIT) computation. The provenance for each variable is packaged as part of the variable's metadata, and can be used to validate data processing and computations (by repeating the analysis on the original data). It also allows for an alternate solution for sharing analyzed data; if the bandwidth for a transfer is prohibitively expensive, the provenance serialization can be passed in a much more compact format and the analysis rerun on the input data. Data provenance tracking in CDMS enables far-reaching and impactful functionalities, permitting implementation of many analytical paradigms.

  12. A practical application of just-in-time.

    Wormsley, J M

    1986-10-01

    During the 1950s, the Japanese recognized that they would have to upgrade their manufacturing operations significantly if they were going to make inroads into world markets. One of the targets they set for themselves was to eliminate waste, particularly, excess inventory. The Toyota Company originated a concept called kanban hoshiki, which, when translated, means "card system". The name refers to the use of tags (cards) to track the flow of work-in-progress inventory. On this side of the Pacific, the kanban hoshiki inventory management system has been renamed Just-in-Time. The basic premise of JIT is that inventory is an evil presence that drains company cash flow, contributes to wast and misuse of company assets, takes up valuable space, and undermines company profitability. The principal goal of JIT, then, is to get as close to zero inventory as possible. JIT has been applied with success in large manufacturing industries and recently has found a home in small business as well. A growing number of hospitals are also experimenting with the JIT concept, sometimes under the name of stockless purchasing.

  13. Embedded Librarians: Just-in-Time or Just-in-Case? A Research Study

    Heathcock, Kristin

    2015-01-01

    Embedded librarians in online courses provide a wealth of service and information to students. Though students indicate that these services are valuable, the librarians providing embedded services frequently note that these projects are very time consuming. This study examines the provision of a less time-intensive model of embedded librarianship…

  14. Managing product complexity: It`s just a matter of time

    Hinckley, C.M.

    1998-06-01

    It has long been the goal of designers to identify a robust measure of product complexity to guide product decisions. Using Design for Assembly evaluations from over 225 assemblies and subassemblies, alternative measures of product complexity are identified and compared. Time is shown to be the most consistently predicted, useful, and fungible measure. The distribution of assembly times for a product can be modeled by Pareto`s law. This leads to a new, more effective product design guideline and a predictive tool that enables rapid and accurate prediction of assembly times for redesigned products without having to repeat DFMA analysis.

  15. Just in TIME (Jit): Sebuah Panduan Menuju Keunggulan Kompetitif

    Johan S, Andi

    2008-01-01

    The most people think that JIT developing by Toyota Motor about 1970. This system integration product and assembly industry in Detroit by Henry Ford. Ford say that “Waste is the stock of materials in goods in excess of requirement that turns up in high prices and low wages” (Jhonson and Wood, 1996). In 1980, industries in USA and Eropa begin to use JIT and adoption from Jepang. One people say that “zero inventory system, lean production system, synchronous manufacturing, stockless production...

  16. Just-in-time characterization and certification of DOE-generated wastes

    Arrenholz, D.A.; Primozic, F.J.; Robinson, M.A.

    1995-01-01

    Transportation and disposal of wastes generated by Department of Energy (DOE) activities, including weapons production and decontamination and decommissioning (D ampersand D) of facilities, require that wastes be certified as complying with various regulations and requirements. These certification requirements are typically summarized by disposal sites in their specific waste acceptance criteria. Although a large volume of DOE wastes have been generated by past activities and are presently in storage awaiting disposal, a significant volume of DOE wastes, particularly from D ampersand D projects. have not yet been generated. To prepare DOE-generated wastes for disposal in an efficient manner. it is suggested that a program of just-in-time characterization and certification be adopted. The goal of just-in-time characterization and certification, which is based on the just-in-time manufacturing process, is to streamline the certification process by eliminating redundant layers of oversight and establishing pro-active waste management controls. Just-in-time characterization and certification would rely on a waste management system in which wastes are characterized at the point of generation, precertified as they are generated (i.e., without iterative inspections and tests subsequent to generation and storage), and certified at the point of shipment, ideally the loading dock of the building from which the wastes are generated. Waste storage would be limited to accumulating containers for cost-efficient transportation

  17. Just-in-time characterization and certification of DOE-generated wastes

    Arrenholz, D.A.; Primozic, F.J. [Benchmark Environmental Corp., Albuquerque, NM (United States); Robinson, M.A. [Los Alamos National Lab., NM (United States)

    1995-12-31

    Transportation and disposal of wastes generated by Department of Energy (DOE) activities, including weapons production and decontamination and decommissioning (D&D) of facilities, require that wastes be certified as complying with various regulations and requirements. These certification requirements are typically summarized by disposal sites in their specific waste acceptance criteria. Although a large volume of DOE wastes have been generated by past activities and are presently in storage awaiting disposal, a significant volume of DOE wastes, particularly from D&D projects. have not yet been generated. To prepare DOE-generated wastes for disposal in an efficient manner. it is suggested that a program of just-in-time characterization and certification be adopted. The goal of just-in-time characterization and certification, which is based on the just-in-time manufacturing process, is to streamline the certification process by eliminating redundant layers of oversight and establishing pro-active waste management controls. Just-in-time characterization and certification would rely on a waste management system in which wastes are characterized at the point of generation, precertified as they are generated (i.e., without iterative inspections and tests subsequent to generation and storage), and certified at the point of shipment, ideally the loading dock of the building from which the wastes are generated. Waste storage would be limited to accumulating containers for cost-efficient transportation.

  18. Just-in-time Time Data Analytics and Visualization of Climate Simulations using the Bellerophon Framework

    Anantharaj, V. G.; Venzke, J.; Lingerfelt, E.; Messer, B.

    2015-12-01

    Climate model simulations are used to understand the evolution and variability of earth's climate. Unfortunately, high-resolution multi-decadal climate simulations can take days to weeks to complete. Typically, the simulation results are not analyzed until the model runs have ended. During the course of the simulation, the output may be processed periodically to ensure that the model is preforming as expected. However, most of the data analytics and visualization are not performed until the simulation is finished. The lengthy time period needed for the completion of the simulation constrains the productivity of climate scientists. Our implementation of near real-time data visualization analytics capabilities allows scientists to monitor the progress of their simulations while the model is running. Our analytics software executes concurrently in a co-scheduling mode, monitoring data production. When new data are generated by the simulation, a co-scheduled data analytics job is submitted to render visualization artifacts of the latest results. These visualization output are automatically transferred to Bellerophon's data server located at ORNL's Compute and Data Environment for Science (CADES) where they are processed and archived into Bellerophon's database. During the course of the experiment, climate scientists can then use Bellerophon's graphical user interface to view animated plots and their associated metadata. The quick turnaround from the start of the simulation until the data are analyzed permits research decisions and projections to be made days or sometimes even weeks sooner than otherwise possible! The supercomputer resources used to run the simulation are unaffected by co-scheduling the data visualization jobs, so the model runs continuously while the data are visualized. Our just-in-time data visualization software looks to increase climate scientists' productivity as climate modeling moves into exascale era of computing.

  19. Just-In-Time predictive control for a two-wheeled robot

    Nakpong, Nuttapun; Yamamoto, Shigeru

    2012-01-01

    In this paper, we introduce the use of Just-In-Time predictive control to enhance the stability of a two-wheeled robot. Just-In-Time predictive control uses a database which includes a huge amounts of input-output data of the two-wheeled robot and predicts its future movements based on a Just-In-Time algorithm. © 2012 IEEE.

  20. Transforming a Business Statistics Course with Just-in-Time Teaching

    Bangs, Joann

    2012-01-01

    This paper describes changing the way a business statistics course is taught through the use of just-in-time teaching methods. Implementing this method allowed for more time in the class to be spent focused on problem solving, resulting in students being able to handle more difficult problems. Students' perceptions of the just-in-time assignments…

  1. 28 Days Later: Twitter Hashtags as "Just in Time" Teacher Professional Development

    Greenhalgh, Spencer P.; Koehler, Matthew J.

    2017-01-01

    Researchers have argued that Twitter has potential to support high-quality professional development (PD) that can respond to teachers' questions and concerns just in time and "on the spot." Yet, very little attention has been paid to instances where Twitter has made just-in-time learning possible. In this paper, we examine one instance…

  2. The School Librarian as Program Administrator: Just-in-Time Librarianship

    Yates, Steven D.

    2011-01-01

    By applying just-in-time philosophy to today's school libraries, librarians can fulfill the role of program administrator by continuing to provide the resources students and faculty deserve, exactly at their individual points of need. Just-in-time librarianship is a mindset that could prove unsettling for some school librarians. The main facets of…

  3. Just-in time system and climate change

    Caceres, J.; Richards, D.

    1999-10-01

    The recent trends in freight transportation and its relationship with production and distribution were analyzed. This was done in an effort to help policy makers develop strategies to reduce greenhouse gas emissions and to develop a freight transportation system and a route system that is environmentally, economically and socially sustainable. One of the ways to find a solution is to restructure the overall industry organization and its link to transportation and the economy. However, this method is met with a lot of resistance by policy makers. Another method would be to find a way to delay or avoid restructuring; for example, by using unlimited greenhouse gas emissions trading. By doing so, emissions reductions would be targeted where they are most economically efficient. 18 refs., 1 fig.

  4. Just-in-time: maximizing its success potential.

    Johnston, S K

    1990-08-01

    The effective implementation and use of JIT manufacturing practices depends largely on the education, training, and commitment of all levels of management to a fundamental quality-first policy. Management must transfer and demonstrate that commitment to every level and extension of the manufacturing endeavor. As a company establishes and reaches toward that goal, the move to JIT manufacturing practices becomes rational and justifiable. Failing to establish and commit to a quality directive greatly diminishes the potential benefits of JIT. If all levels of manufacturing participate in the JIT planning, implementing, and maintenance procedure, the realization of positive change and improvement drives the process. Total participation makes the task of JIT implementation not only possible, but practical. Enhanced mutual respect for all concerned is a likely consequence, advancing the productive environment.

  5. Just-in-Time Teaching in Statistics Classrooms

    McGee, Monnie; Stokes, Lynne; Nadolsky, Pavel

    2016-01-01

    Much has been made of the flipped classroom as an approach to teaching, and its effect on student learning. The volume of material showing that the flipped classroom technique helps students better learn and better retain material is increasing at a rapid pace. Coupled with this technique is active learning in the classroom. There are many ways of…

  6. THE APPLICATION OF THE JUST-IN-TIME PHILOSOPHY IN THE CHINESE CONSTRUCTION INDUSTRY

    Low Sui Pheng

    2011-10-01

    Full Text Available The Just-in-Time (JIT philosophy originated from the Toyota Production System (TPS and has been used in the manufacturing industry for many decades. It has helped to increase the productivity of the industry and has also increased the quality of its products. In recent years, numerous studies in developed countries have endeavoured to introduce JIT in the construction industry to reap similar benefits. This study focused on applying JIT to the Chinese construction industry with the goal of improving its performance and thus its competitiveness. This paper discusses the current state of the Chinese construction industry; presents the potential impediments to implementing JIT; and proposes a framework for JIT implementation in the areas of design, procurement, construction and inspection. The results of this study suggest that government and educational institutions should play a key role in spearheading the application of JIT in the construction industry in China.

  7. Improving Student Learning of Calculus Topics via Modified Just-in-Time Teaching Methods

    Natarajan, Rekha; Bennett, Andrew

    2014-01-01

    Although the use of traditional just-in-time teaching techniques has long been viewed positively by students and instructors in undergraduate calculus courses, past studies in this area have not addressed gains in student achievement with respect to specific calculus topics. This paper investigates the latter by administering modified just-in-time…

  8. On Time in Just War Theory:From Chronos to Kairos

    Thaler, Mathias

    2014-01-01

    This article examines the role of time in Just War theory. It maintains that contemporary Just War theory’s legalist focus on rules and principles, rather than judgment and interpretation, makes a serious engagement with timing appear quite irrelevant. To deal with this shortcoming, the article clarifies the dual nature of political time as both chronos and kairos, and argues that a cogent account of the justice of warfare needs to incorporate the two faces of political time. In addition, the...

  9. Impact of Just-in-Time and Just-in-Place Simulation on Intern Success With Infant Lumbar Puncture.

    Kessler, David; Pusic, Martin; Chang, Todd P; Fein, Daniel M; Grossman, Devin; Mehta, Renuka; White, Marjorie; Jang, Jaewon; Whitfill, Travis; Auerbach, Marc

    2015-05-01

    Simulation-based skill trainings are common; however, optimal instructional designs that improve outcomes are not well specified. We explored the impact of just-in-time and just-in-place training (JIPT) on interns' infant lumbar puncture (LP) success. This prospective study enrolled pediatric and emergency medicine interns from 2009 to 2012 at 34 centers. Two distinct instructional design strategies were compared. Cohort A (2009-2010) completed simulation-based training at commencement of internship, receiving individually coached practice on the LP simulator until achieving a predefined mastery performance standard. Cohort B (2010-2012) had the same training plus JIPT sessions immediately before their first clinical LP. Main outcome was LP success, defined as obtaining fluid with first needle insertion and <1000 red blood cells per high-power field. Process measures included use of analgesia, early stylet removal, and overall attempts. A total of 436 first infant LPs were analyzed. The LP success rate in cohort A was 35% (13/37), compared with 38% (152/399) in cohort B (95% confidence interval for difference [CI diff], -15% to +18%). Cohort B exhibited greater analgesia use (68% vs 19%; 95% CI diff, 33% to 59%), early stylet removal (69% vs 54%; 95% CI diff, 0% to 32%), and lower mean number of attempts (1.4 ± 0.6 vs 2.1 ± 1.6, P < .01) compared with cohort A. Across multiple institutions, intern success rates with infant LP are poor. Despite improving process measures, adding JIPT to training bundles did not improve success rate. More research is needed on optimal instructional design strategies for infant LP. Copyright © 2015 by the American Academy of Pediatrics.

  10. Just Research in Contentious Times: Widening the Methodological Imagination

    Fine, Michelle

    2017-01-01

    In this intensely powerful and personal new text, Michelle Fine widens the methodological imagination for students, educators, scholars, and researchers interested in crafting research with communities. Fine shares her struggles over the course of 30 years to translate research into policy and practice that can enhance the human condition and…

  11. Just-in-time Data Distribution for Analytical Query Processing

    M.G. Ivanova (Milena); M.L. Kersten (Martin); F.E. Groffen (Fabian)

    2012-01-01

    textabstract Distributed processing commonly requires data spread across machines using a priori static or hash-based data allocation. In this paper, we explore an alternative approach that starts from a master node in control of the complete database, and a variable number of worker nodes

  12. Just-in-Time Simulation Platform, Phase I

    National Aeronautics and Space Administration — Long-duration missions may one day present the most demanding situations ever encountered in manned spaceflight. Success will therefore depend on the knowledge and...

  13. Just in time: an update on continuum neurogenetics.

    Rost, Natalia S

    2011-04-01

    The field of neurogenetics has been revolutionized by the advances in genome-wide association testing. Recent gene discoveries for disorders of neurodegeneration, CNS demyelination, and neurodevelopmental and cerebrovascular syndromes begin to shape our understanding of the complexity of their underlying genetic architecture. In the future, this knowledge should advance risk prediction, prevention, diagnosis, and treatment strategies for patients with neurologic disorders and their families.

  14. JIST: Just-In-Time Scheduling Translation for Parallel Processors

    Giovanni Agosta

    2005-01-01

    Full Text Available The application fields of bytecode virtual machines and VLIW processors overlap in the area of embedded and mobile systems, where the two technologies offer different benefits, namely high code portability, low power consumption and reduced hardware cost. Dynamic compilation makes it possible to bridge the gap between the two technologies, but special attention must be paid to software instruction scheduling, a must for the VLIW architectures. We have implemented JIST, a Virtual Machine and JIT compiler for Java Bytecode targeted to a VLIW processor. We show the impact of various optimizations on the performance of code compiled with JIST through the experimental study on a set of benchmark programs. We report significant speedups, and increments in the number of instructions issued per cycle up to 50% with respect to the non-scheduling version of the JITcompiler. Further optimizations are discussed.

  15. Just-in-time, Schematic Supportive Information Presentation During Cognitive Skill Acquisition.

    Kester, Liesbeth; Lehnen, Chris; Van Gerven, Pascal; Kirschner, Paul A.

    2008-01-01

    Kester, L., Lehnen, C., Van Gerven, P.W. M., & Kirschner, P. A. (2006). Just-in-time, Schematic Supportive Information Presentation During Cognitive Skill Acquisition. Computers in Human Behavior, 22, 93-112 .

  16. Just-in-time information presentation and the acquisition of complex cognitive skills

    Kester, Liesbeth; Kirschner, Paul A.; Van Merriënboer, Jeroen; Bäumer, Anita

    2008-01-01

    Kester, L., Kirschner, P., van Merriënboer, J. J. G., & Bäumer, A. (2001). Just-in-time information presentation and the acquisition of complex cognitive skills. Computers in Human Behavior, 17, 373-391.

  17. ANALISIS PENERAPAN JUST IN TIME DALAM MENINGKATKAN EFISIENSI PRODUKSI PADA PT. CIPTA BETON SINAR PERKASA DI MAKASSAR

    MUSLIMIN, EDWIN

    2012-01-01

    Tujuan dari penelitian ini adalah untuk melihat bagaimana penerapan Just in Time dalam produksi campuran beton pada PT. Cipta Beton Sinar Perkasa di Makassardan untuk mengetahui throughput time yang diperoleh dengan penerapan Just in Time.

  18. Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants

    Shidid, Darpan; Leary, Martin; Choong, Peter; Brandt, Milan

    Recent advances in medical imaging and manufacturing science have enabled the design and production of complex, patient-specific orthopaedic implants. Additive Manufacture (AM) generates three-dimensional structures layer by layer, and is not subject to the constraints associated with traditional manufacturing methods. AM provides significant opportunities for the design of novel geometries and complex lattice structures with enhanced functional performance. However, the design and manufacture of patient-specific AM implant structures requires unique expertise in handling various optimization platforms. Furthermore, the design process for complex structures is computationally intensive. The primary aim of this research is to enable the just-in-time customisation of AM prosthesis; whereby AM implant design and manufacture be completed within the time constraints of a single surgical procedure, while minimising prosthesis mass and optimising the lattice structure to match the stiffness of the surrounding bone tissue. In this research, a design approach using raw CT scan data is applied to the AM manufacture of femoral prosthesis. Using the proposed just-in-time concept, the mass of the prosthesis was rapidly designed and manufactured while satisfying the associated structural requirements. Compressive testing of lattice structures manufactured using proposed method shows that the load carrying capacity of the resected composite bone can be recovered by up to 85% and the compressive stiffness of the AM prosthesis is statistically indistinguishable from the stiffness of the initial bone.

  19. A study on the applicability of just-in-time in manufacturing of ethanol

    Marcelo Giroto Rebelato

    2012-08-01

    Full Text Available The aim of this paper is to analyze the applicability of the Just-in-Time (JIT System in manufacturing of ethanol. For this, were selected from the specialized literature the requirements that make up the JIT System so that each requirement identified was confronted to the characteristics and peculiarities of the process and current technology of producing ethanol. We conclude that, although the most significant requirement of the JIT system, manufacturing in the rhythm of "customer pull" is not possible in the manufacture of ethanol given the peculiar characteristic of its main raw material, sugarcane, we conclude that JIT is applicable to the ethanol production system and can bring real benefits to companies that adopt it.

  20. Just-in-Time Technology to Encourage Incremental, Dietary Behavior Change

    Intille, Stephen S.; Kukla, Charles; Farzanfar, Ramesh; Bakr, Waseem

    2003-01-01

    Our multi-disciplinary team is developing mobile computing software that uses “just-in-time” presentation of information to motivate behavior change. Using a participatory design process, preliminary interviews have helped us to establish 10 design goals. We have employed some to create a prototype of a tool that encourages better dietary decision making through incremental, just-in-time motivation at the point of purchase.

  1. Just-in-Time Technology to Encourage Incremental, Dietary Behavior Change

    Intille, Stephen S.; Kukla, Charles; Farzanfar, Ramesh; Bakr, Waseem

    2003-01-01

    Our multi-disciplinary team is developing mobile computing software that uses “just-in-time” presentation of information to motivate behavior change. Using a participatory design process, preliminary interviews have helped us to establish 10 design goals. We have employed some to create a prototype of a tool that encourages better dietary decision making through incremental, just-in-time motivation at the point of purchase. PMID:14728379

  2. Development of a Just-in-Time Adaptive mHealth Intervention for Insomnia: Usability Study.

    Pulantara, I Wayan; Parmanto, Bambang; Germain, Anne

    2018-05-17

    Healthy sleep is a fundamental component of physical and brain health. Insomnia, however, is a prevalent sleep disorder that compromises functioning, productivity, and health. Therefore, developing efficient treatment delivery methods for insomnia can have significant societal and personal health impacts. Cognitive behavioral therapy for insomnia (CBTI) is the recommended first-line treatment of insomnia but access is currently limited for patients, since treatment must occur in specialty sleep clinics, which suffer from an insufficient number of trained clinicians. Smartphone-based interventions offer a promising means for improving the delivery of CBTI. Furthermore, novel features such as real-time monitoring and assessment, personalization, dynamic adaptations of the intervention, and context awareness can enhance treatment personalization and effectiveness, and reduce associated costs. Ultimately, this "Just in Time Adaptive Intervention" for insomnia-an intervention approach that is acceptable to patients and clinicians, and is based on mobile health (mHealth) platform and tools-can significantly improve patient access and clinician delivery of evidence-based insomnia treatments. This study aims to develop and assess the usability of a Just in Time Adaptive Intervention application platform called iREST ("interactive Resilience Enhancing Sleep Tactics") for use in behavioral insomnia interventions. iREST can be used by both patients and clinicians. The development of iREST was based on the Iterative and Incremental Development software development model. Requirement analysis was based on the case study's description, workflow and needs, clinician inputs, and a previously conducted BBTI military study/implementation of the Just in Time Adaptive Intervention architecture. To evaluate the usability of the iREST mHealth tool, a pilot usability study was conducted. Additionally, this study explores the feasibility of using an off-the-shelf wearable device to

  3. IMPLEMENTASI JUST-IN-TIME LAYANAN PENERBITAN NOMOR POKOK WAJIB PAJAK

    Ali Tafriji Biswan

    2017-08-01

    Full Text Available Abstract: Just-In-Time Implementation on The Issuance Of Taxpayer Identification Number. This study aims to analyze the implementation of Just-in-Time (JIT for the issuance of a Taxpayer Identification Number (NPWP through one stop integrated services at Investment Coordinating Board. The method of this research is a qualitative description with case study approach. The results showed that NPWP issuance services represent as an implementation of JIT concept with its characteristics of pull systems, cellular manufacturing, and time and resources reduction. In addition, the entire service process can be performed by one multiskilled officer in a counter.

  4. Active Learning and Just-in-Time Teaching in a Material and Energy Balances Course

    Liberatore, Matthew W.

    2013-01-01

    The delivery of a material and energy balances course is enhanced through a series of in-class and out-of-class exercises. An active learning classroom is achieved, even at class sizes over 150 students, using multiple instructors in a single classroom, problem solving in teams, problems based on YouTube videos, and just-in-time teaching. To avoid…

  5. Effectiveness of Just in Time Teaching on Student Achievement in an Introductory Thermodynamics Course

    Liberatore, Matthew W.; Morrish, Rachel M.; Vestal, Charles R.

    2017-01-01

    The utility of Just-In-Time-Teaching (JITT) is compared across course topics and groups of students not receiving JITT exercises in class. JITT feedback incorporated various active learning exercises based on students' performance on online homework problems from Sapling Learning. With over 200 students in two sections participating in the…

  6. Interpretive Structural Modeling Of Implementation Enablers For Just In Time In ICPI

    Nitin Upadhye

    2014-12-01

    Full Text Available Indian Corrugated Packaging Industries (ICPI have built up tough competition among the industries in terms of product cost, quality, product delivery, flexibility, and finally customer’s demand. As their customers, mostly OEMs are asking Just in Time deliveries, ICPI must implement JIT in their system. The term "JIT” as, it denotes a system that utilizes less, in terms of all inputs, to create the same outputs as those created by a traditional mass production system, while contributing increased varieties for the end customer. (Womack et al. 1990 "JIT" focuses on abolishing or reducing Muda (“Muda", the Japanese word for waste and on maximizing or fully utilizing activities that add value from the customer's perspective. There is lack of awareness in identifying the right enablers of JIT implementation. Therefore, this study has tried to find out the enablers from the literature review and expert’s opinions from corrugated packaging industries and developed the relationship matrix to see the driving power and dependence between them. In this study, modeling has been done in order to know the interrelationships between the enablers with the help of Interpretive Structural Modeling and Cross Impact Matrix Multiplication Applied to Classification (MICMAC analysis for the performance of Indian corrugated packaging industries.

  7. The Just in Time Approach To Effectively Use Business Software in College Business Courses.

    Hoyt, Brian R.

    The skills necessary to compete in a fast paced business environment--critical thinking, risk taking, team building, project management, and others--are not and cannot be addressed in the traditional delivery of an undergraduate business course. The Ohio University-Lancaster Management program uses a project based, just-in-time (JIT) approach to…

  8. Adopting Just-in-Time Teaching in the Context of an Elementary Science Education Methodology Course

    Osmond, Pamela; Goodnough, Karen

    2011-01-01

    In this self-study, Pamela, a new science teacher educator, adopted Just-in-Time Teaching (JiTT) in the context of an elementary science education methodology course. JiTT is a teaching and learning strategy involving interaction between web-based study assignments and face-to-face class sessions. Students respond electronically to web-based…

  9. Sequencing games with Just-in-Time arrival, and related games

    Lohmann, E.R.M.A.; Borm, P.E.M.; Slikker, M.

    2014-01-01

    In this paper sequencing situations with Just-in-Time (JiT) arrival are introduced. This new type of one-machine sequencing situations assumes that a job is available to be handled by the machine as soon as its predecessor is finished. A basic predecessor dependent set-up time is incorporated in the

  10. Just-in-Time Online Professional Development Activities for an Innovation in Small Rural Schools

    Hamel, Christine; Allaire, Stephane; Turcotte, Sandrine

    2012-01-01

    This article describes the just-in-time online professional development offered to teachers in the Remote Networked Schools (RNS), a systemic initiative funded by the Quebec Ministry of Education (Canada), which aims at enriching the learning environment of small rural schools with the use of information and communication technologies (ICTs). The…

  11. The AMIDA automatic content linking device: Just-in-time document retrieval in meetings

    Popescu-Belis, A.; Boertjes, E.M.; Kilgour, J.; Poller, P.; Castronovo, S.; Wilson, T.; Jaimes, A.; Carletta, J.

    2008-01-01

    The AMIDA Automatic Content Linking Device (ACLD) is a just-in-time document retrieval system for meeting environments. The ACLD listens to a meeting and displays information about the documents from the group's history that are most relevant to what is being said. Participants can view an outline

  12. Just-in-time information presentation and the acquisition of complex cognitive skills

    Kester, L.; Kirschner, P.A.; Merriënboer, J.J.G. van; Baumer, A.

    2001-01-01

    This paper describes a model for just-in-time (JIT) presentation of information. Learners receive the information needed to carry out a task precisely at the time it is needed. The model is twofold: supportive information is best presented before practising task clusters while

  13. Just-in-time information presentation and the acquisition of complex cognitive skills

    Kester, Liesbeth; Kirschner, Paul A.; van Merrienboer, Jeroen J.G.; Baumer, Anita

    This paper describes a model for just-in-time (JIT) presentation of information. Learners receive the information needed to carry out a task precisely at the time it is needed. The model is twofold: supportive information is best presented before practising task clusters while prerequisite

  14. Ubiquitous computing technology for just-in-time motivation of behavior change.

    Intille, Stephen S

    2004-01-01

    This paper describes a vision of health care where "just-in-time" user interfaces are used to transform people from passive to active consumers of health care. Systems that use computational pattern recognition to detect points of decision, behavior, or consequences automatically can present motivational messages to encourage healthy behavior at just the right time. Further, new ubiquitous computing and mobile computing devices permit information to be conveyed to users at just the right place. In combination, computer systems that present messages at the right time and place can be developed to motivate physical activity and healthy eating. Computational sensing technologies can also be used to measure the impact of the motivational technology on behavior.

  15. Just in time or Just in case: A Case study on the impact of context in ERP implementations

    Don V Kerr

    2010-01-01

    Full Text Available This paper looks at a case study of an Enterprise Resource Planning System (ERP implementation in a geographically dispersed utility company and the approach by middle management to several problem situations involving contextual issues and end-user developed (feral systems. The paper contends that despite the extremely effective databases and sophisticated modules for business analytic functions within most ERP’s, middle managers are still in the “just in case of an incident” mode of inventory management and data entered in their own feral systems may be significantly different to the inventory levels recorded in the main ERP. We contend that these problems point towards the failure of ERP systems to be context sensitive to organisations. It highlights problems in contemporary research which appears to lack understanding of different organisational contexts and how they could impact on ERP implementations. This paper argues that context and the ideals of ERP systems are often mismatched which leads to the development of feral systems, poor inventory practices and ERP systems implementation failure. The paper discusses the literature around ERP systems implementation and argues that context is an overlooked factor in the analysis of such systems. The paper uses case study evidence to demonstrate mismatched context and highlights the problems with assuming ERP systems are one size fits all. The paper concludes with a call to build more contextual research in the study of ERP implementations.

  16. The Hybrid Design: Integrating the Human and Technical Components of Just-In-Time Knowledge Management Systems

    Nabie Y. Conteh

    2011-06-01

    Full Text Available This paper explores the right balance of human and technical resources in the design of Just-in-Time knowledge delivery. It also examines and analyzes the case study: “Teltech: The business of Knowledge Management” by Davenport. It further attempts to depict the characteristics of the hybrid. The paper describes how the hybrid can be applied to Just-In-Time knowledge delivery. It also seeks to analyze and explore its interplay with knowledge splits with a view to designing Just-In- Time Knowledge Management. These include: “tacit versus explicit knowledge”, “in-process” versus “after action” documentation, “process-centered versus product-centered approach”, “knowledge versus information” and the “culture of sharing versus hoarding.”

  17. You Have to Judge on the Spot: Just-in-Time Community Art Education

    Sinner, Anita; Wicks, Jennifer; Zantingh, Petra

    2017-01-01

    This proposition concerning "just-in-time" teaching was initiated in the field where the practices of two student-teachers have inspired ongoing and continued study into community art education as a site of creative and innovative teaching and learning that contributes to forms of public pedagogy. Informed by the year-long practicum…

  18. Transforming Common-Sense Beliefs into Newtonian Thinking through Just-in-Time Teaching

    Formica, Sarah P.; Easley, Jessica L.; Spraker, Mark C.

    2010-01-01

    To determine whether teaching an introductory physics course with a traditional lecture style or with Just-in-Time teaching (a student-centered, interactive-engagement style) will help students to better understand Newtonian concepts, such as Newton's Third Law, 222 students in introductory physics courses taught by traditional lecture styles and…

  19. Registration concepts for the just-in-time artefact correction by means of virtual computed tomography

    Kasperl, St.; Franz, M. [Fraunhofer Development Center for X-ray Technology EZRT, a cooperative dept. of the Fraunhofer Institutes IZFP Saarbrucken and IIS Erlangen, Furth (Germany)

    2007-07-01

    This article deals with the enhancement of accuracy in CT by just-in-time correction of artefacts (beam hardening, scattered radiation) caused by the interaction of X-rays with matter. The so called EAR method needs for simulation a registration of the object. Therefore the article presents two different registration concepts. (authors)

  20. Registration concepts for the just-in-time artefact correction by means of virtual computed tomography

    Kasperl, St.; Franz, M.

    2007-01-01

    This article deals with the enhancement of accuracy in CT by just-in-time correction of artefacts (beam hardening, scattered radiation) caused by the interaction of X-rays with matter. The so called EAR method needs for simulation a registration of the object. Therefore the article presents two different registration concepts. (authors)

  1. Critical elements in implementations of just-in-time management: empirical study of cement industry in Pakistan

    Qureshi, Muhammad Imran; Iftikhar, Mehwish; Bhatti, Mansoor Nazir; Shams, Tauqeer; Zaman, Khalid

    2013-01-01

    In recent years, inventory management is continuous challenge for all organizations not only due to heavy cost associated with inventory holding, but also it has a great deal to do with the organizations production process. Cement industry is a growing sector of Pakistan?s economy which is now facing problems in capacity utilization of their plants. This study attempts to identify the key strategies for successful implementation of just-in-time (JIT) management philosophy on the cement indust...

  2. Surface contact stimulates the just-in-time deployment of bacterial adhesins.

    Li, Guanglai; Brown, Pamela J B; Tang, Jay X; Xu, Jing; Quardokus, Ellen M; Fuqua, Clay; Brun, Yves V

    2012-01-01

    The attachment of bacteria to surfaces provides advantages such as increasing nutrient access and resistance to environmental stress. Attachment begins with a reversible phase, often mediated by surface structures such as flagella and pili, followed by a transition to irreversible attachment, typically mediated by polysaccharides. Here we show that the interplay between pili and flagellum rotation stimulates the rapid transition between reversible and polysaccharide-mediated irreversible attachment. We found that reversible attachment of Caulobacter crescentus cells is mediated by motile cells bearing pili and that their contact with a surface results in the rapid pili-dependent arrest of flagellum rotation and concurrent stimulation of polar holdfast adhesive polysaccharide. Similar stimulation of polar adhesin production by surface contact occurs in Asticcacaulis biprosthecum and Agrobacterium tumefaciens. Therefore, single bacterial cells respond to their initial contact with surfaces by triggering just-in-time adhesin production. This mechanism restricts stable attachment to intimate surface interactions, thereby maximizing surface attachment, discouraging non-productive self-adherence, and preventing curing of the adhesive. © 2011 Blackwell Publishing Ltd.

  3. Just-in-Time Teaching Techniques through Web Technologies for Vocational Students' Reading and Writing Abilities

    Chantoem, Rewadee; Rattanavich, Saowalak

    2016-01-01

    This research compares the English language achievements of vocational students, their reading and writing abilities, and their attitudes towards learning English taught with just-in-time teaching techniques through web technologies and conventional methods. The experimental and control groups were formed, a randomized true control group…

  4. Blogs and Wikis as Instructional Tools: A Social Software Adaptation of Just-in-Time Teaching

    Higdon, Jude; Topaz, Chad

    2009-01-01

    Just-in-Time Teaching (JiTT) methodology uses Web-based tools to gather student responses to questions on preclass reading assignments. However, the technological requirements of JiTT and the content-specific nature of the questions may prevent some instructors from implementing it. Our own JiTT implementation uses publicly and freely available…

  5. Sistema Toyota de produção: mais do que simplesmente Just-in-Time

    Paulo Ghinato

    1995-12-01

    Full Text Available As interpretações acerca do Sistema Toyota de Produção (STP, apontando o Just-In-Time e o Kanban como sua essência, demostram um entendimento limitado de sua verdadeira abrangência e potencialidade. O STP está estruturado sobre a base da completa eliminação das perdas, tendo o JIT e a autonomação como seus dois pilares de sustentação. O Controle da Qualidade Zero Defeitos (CQZD aparece, também, como elemento essencial para a operacionalização da autonomação e funcionalidade de todo o sistema. Neste artigo, pretende-se apresentar um modelo que represente esta interpretação. Com este propósito, o modelo apresentado por Monden é adotado como ponto de partida, introduzindo-lhe, no entanto, significativas mudanças. Neste artigo, discute-se cada uma das relações mantidas pela autonomação e pelo CQZD com os diversos componentes do sistema.The interpretations of the Toyota Production System (TPS which point out to Just-In-Time (JIT and Kanban as its essence are evidence of restrictive understanding of its real reach and strength. The TPS has the "complete elimination of wastes " as its grounds and JIT and autonomation as its two pillars. Zero Defect Quality Control (ZDQC appears as essential support to the operation of autonomation and Systems working. In this paper it is proposed a model which may portray the above interpretation of TPS. On this purpose, the model proposed by Monden was taken up as a starting point. Nevertheless, it was necessary to introduce significant changes. It is also discussed the nature o@f links among autonomation, ZDCQ and all Systems components.

  6. Just-in-Time Video Laryngoscopy Versus Direct Laryngoscopy for Neonatal Intubation.

    Grgurich, Erin; Arnemann, Cynthia; Amon, Kim; Horton, Rose; Carlson, Jestin N

    As neonatal endotracheal intubation (ETI) is a low-frequency, high-consequence event, it is essential that providers have access to resources to aid in ETI. We sought to determine the impact of video laryngoscopy (VL) with just-in-time training on intubation outcomes over direct laryngoscopy (DL) when performed by neonatal nurses. We conducted a prospective, randomized, crossover study with neonatal nurses employed at a level 2 neonatal intensive care unit (NICU). Nurses performed both DL and VL on a neonatal mannequin using a CMAC (Karl Storz Corp, Tuttlingen, Germany) either with the assistance of the screen (VL) or without (DL). Before performing the intubation, providers were given a just-in-time, brief education presentation and allowed to practice with the device. Each ETI attempt was reviewed to obtain the percentage of glottic opening (POGO) score, time to intubation (TTI, time from insertion of the blade into the mouth until the first breath was delivered), and time from blade insertion until the best POGO score. We enrolled 19 participants, with a median (interquartile range) of 20 (9-26) years of experience and having a median of 2 (1-3) intubations within the past year. None had used VL in the NICU previously. Median TTI did not differ between DL and VL: 19.9 (15.3-41.5) vs 20.3 (17.9-24.4) (P = 1). POGO scores and the number of attempts also did not differ between DL and VL. In our simulated setting, just-in-time VL training provided similar intubation outcomes compared with DL in ETI performed by neonatal nurses. Just-in-time VL education may be an alternative to traditional DL for neonatal intubations.

  7. As relações entre estratégia de produção, TQM (Total Quality Management ou Gestão da Qualidade Total e JIT (Just-In-Time: estudos de caso em uma empresa do setor automobilístico e em dois de seus fornecedores The relationships between production strategy, TQM (Total Quality Management and JIT (Just-In-Time: a case study in a automobile company and in two of its suppliers

    Aline Lamon Cerra

    2000-12-01

    Full Text Available Este artigo tem como objetivo discutir as relações existentes entre as Estratégias de Produção e os programas TQM (Total Quality Management ou Gestão da Qualidade Total e JIT (Just-In-Time, destacando a importância da integração destes programas às Estratégias de Produção nas empresas. O estudo desta integração demonstrou que os programas TQM e JIT, embora possam trabalhar separadamente, são complementares e devem estar alinhados com as Estratégias de Produção a fim de promover melhorias na função produção. Além disso, será verificado de que modo a empresa automobilística condiciona a difusão das estratégias e programas adotados em sua cadeia de fornecedores. Serão apresentados os conceitos básicos e questões teóricas relacionados à Estratégia de Produção, ao TQM e ao JIT, e um estudo de caso nas três empresas.This paper has the objective to discuss the existent relationships between the Manufacturing Strategy and the programs TQM - Total Quality Management and JIT - Just-In-Time, highlighting the importance of the integration between the production strategy and the other strategies of the company. Besides, the relationships will be discussed among TQM and JIT, programs that came up with the objective of promoting In the function production; the study demonstrated that those programs, although they can work separately, are complemental and should be aligned with the production strategy. Then, we will present the basic concepts and theoretical subjects related to the Production Strategy, to TQM and JIT, and a case study in a automobile company and two of its suppliers. The three companies are multinational and placed inside São Paulo. Thus, in the automobile company we will also verify the conditions of diffusion of its strategies and its programs in its supply chain.

  8. Just In Time Value Chain Total Quality Management Part Of Technical Strategic Management Accounting

    Lesi Hertati

    2015-08-01

    Full Text Available This article aims to determine Just In Time Value Chain Total Quality Management tqm as a technique in management accounting stategis.Tujuan Just In Time value chain or value chain Total Quality Management TQM is strategic for customer satisfaction in the long term obtained from the information. Quality information is the way to continuous improvement in order to increase the companys financial performance in the long term to increase competitive advantage. Strategic Management Accounting process gather competitor information explore opportunities to reduce costs integrate accounting with emphasis on the strategic position of the competition is a great plan. An overall strategic plan interrelated and serves as the basis for achieving targets or goals ahead.

  9. Food and Mood: Just-in-Time Support for Emotional Eating

    Caroll, Erin; Czerwinski, Mary; Roseway, Asta; schraefel, m.c.

    2013-01-01

    Behavior modification in health is difficult, as habitual behaviors are extremely well-learned, by definition. This research is focused on building a persuasive system for behavior modification around emotional eating. In this paper, we make strides towards building a just-in-time support system for emotional eating in three user studies. The first two studies involved participants using a custom mobile phone application for tracking emotions, food, and receiving interventions. We found lots ...

  10. How far from Just-in-time are Portuguese firms? A survey of its progress and perception.

    Maria Rosário Moreira; Rui Alves

    2006-01-01

    As competition increases, Just-in-Time (JIT) manufacturing becomes an important issue in Portuguese industry. After a brief review of its history, elements, advantages and limitations, this paper presents the results of a postal questionnaire survey about JIT system sent to a sample of manufacturing firms in Portugal, with the aim of determining the degree of development, perception and status of JIT production in Portuguese industries. The findings suggest that the surveyed firms have a basi...

  11. Just-In-Time eTraining Applied To Emergency Medical Services

    Vico Vela, Francisco José; Sánchez Canteli, Vicente; Lobo Fernández, Daniel; Fernández Rodríguez, Jose David; Bandera, César; Rivas, Ramón; Rosen, M.; Schlegel, M.

    2013-01-01

    While the applications of just-in-time training are more and more spread, the ubiquitous mobile technology has not found practical uses of this training strategy. As an original example of services for healthcare, we present in this work an application of eTraining that makes use of mobile telephones to transmit medical and on-site information content to emergency medical personnel that attend and emergency. The state-of-the-art in related technologies, overall architectu...

  12. Just-in-Time Training: A Novel Approach to Quality Improvement Education.

    Knutson, Allison; Park, Nesha D; Smith, Denise; Tracy, Kelly; Reed, Danielle J W; Olsen, Steven L

    2015-01-01

    Just-in-time training (JITT) is accepted in medical education as a training method for newer concepts or seldom-performed procedures. Providing JITT to a large nursing staff may be an effective method to teach quality improvement (QI) initiatives. We sought to determine if JITT could increase knowledge of a specific nutrition QI initiative. Members of the nutrition QI team interviewed staff using the Frontline Contextual Inquiry to assess knowledge regarding the specific QI project. The inquiry was completed pre- and post-JITT. A JITT educational cart was created, which allowed trainers to bring the educational information to the bedside for a short, small group educational session. The results demonstrated a marked improvement in the knowledge of the frontline staff regarding our Vermont Oxford Network involvement and the specifics of the nutrition QI project. Just-in-time training can be a valuable and effective method to disseminate QI principles to a large audience of staff members.

  13. Just-in-Time Correntropy Soft Sensor with Noisy Data for Industrial Silicon Content Prediction.

    Chen, Kun; Liang, Yu; Gao, Zengliang; Liu, Yi

    2017-08-08

    Development of accurate data-driven quality prediction models for industrial blast furnaces encounters several challenges mainly because the collected data are nonlinear, non-Gaussian, and uneven distributed. A just-in-time correntropy-based local soft sensing approach is presented to predict the silicon content in this work. Without cumbersome efforts for outlier detection, a correntropy support vector regression (CSVR) modeling framework is proposed to deal with the soft sensor development and outlier detection simultaneously. Moreover, with a continuous updating database and a clustering strategy, a just-in-time CSVR (JCSVR) method is developed. Consequently, more accurate prediction and efficient implementations of JCSVR can be achieved. Better prediction performance of JCSVR is validated on the online silicon content prediction, compared with traditional soft sensors.

  14. {open_quotes}Just-in-time inventory{close_quotes} proceed with caution!

    Katterhenry, W.E.

    1995-08-01

    Just when the power generation industry was stabilizing along came mega government regulations and changing economic conditions that threw a monkey wrench into the works. Although improved inventory practices have helped solve some coal problems, other still remain. The Clean Air Act has resulted in fuel switching, blending, equipment changes, and other factors, all contributing to power plant personnel grey hair. Then along came Just-In-Time inventory practices. Not only is the plant required to make all these changes to meet regulatory requirements, but reduce the quantity of fuel in inventory to unheard of low levels. Why is it so difficult to precisely account for coal in inventory? After all, inventory is a simple matter of accurately measuring the coal coming in to the plant, measuring the coal used by the plant, and conducting an accurate physical inventory to measure the remaining coal. Add to this, a major coal inventory reduction policy, when base maps are not maintained or updated and are, therefore, not likely to be accurate. Some coal may have been stored below the prevailing water table, rendering the coal unusable. Weather conditions, such as major ice storms can render much of the coal unburnable. Unless accounted for, these things reduce the perceived amount of coal in inventory. This presentation will address these issues to assist in preventing potential unscheduled plant shut down and the need to purchase unscheduled blocks of emergency power. Just-In-Time Inventory isn`t as straightforward as first meets the eye.

  15. Just-in-time coding of the problem list in a clinical environment.

    Warren, J. J.; Collins, J.; Sorrentino, C.; Campbell, J. R.

    1998-01-01

    Clinically useful problem lists are essential to the CPR. Providing a terminology that is standardized and understood by all clinicians is a major challenge. UNMC has developed a lexicon to support their problem list. Using a just-in-time coding strategy, the lexicon is maintained and extended prospectively in a dynamic clinical environment. The terms in the lexicon are mapped to ICD-9-CM, NANDA, and SNOMED International classification schemes. Currently, the lexicon contains 12,000 terms. This process of development and maintenance of the lexicon is described. PMID:9929226

  16. Critical elements in implementations of just-in-time management: empirical study of cement industry in Pakistan.

    Qureshi, Muhammad Imran; Iftikhar, Mehwish; Bhatti, Mansoor Nazir; Shams, Tauqeer; Zaman, Khalid

    2013-01-01

    In recent years, inventory management is continuous challenge for all organizations not only due to heavy cost associated with inventory holding, but also it has a great deal to do with the organizations production process. Cement industry is a growing sector of Pakistan's economy which is now facing problems in capacity utilization of their plants. This study attempts to identify the key strategies for successful implementation of just-in-time (JIT) management philosophy on the cement industry of Pakistan. The study uses survey responses from four hundred operations' managers of cement industry in order to know about the advantages and benefits that cement industry have experienced by Just in time (JIT) adoption. The results show that implementing the quality, product design, inventory management, supply chain and production plans embodied through the JIT philosophy which infect enhances cement industry competitiveness in Pakistan. JIT implementation increases performance by lower level of inventory, reduced operations & inventory costs was reduced eliminates wastage from the processes and reduced unnecessary production which is a big challenge for the manufacturer who are trying to maintain the continuous flow processes. JIT implementation is a vital manufacturing strategy that reaches capacity utilization and minimizes the rate of defect in continuous flow processes. The study emphasize the need for top management commitment in order to incorporate the necessary changes that need to take place in cement industry so that JIT implementation can take place in an effective manner.

  17. Just-in-Time to Save Lives: A Pilot Study of Layperson Tourniquet Application.

    Goolsby, Craig; Branting, Andrew; Chen, Elizabeth; Mack, Erin; Olsen, Cara

    2015-09-01

    The objective was to determine whether just-in-time (JiT) instructions increase successful tourniquet application by laypersons. This was a randomized pilot study conducted in August 2014. The study occurred at the Uniformed Services University campus in Bethesda, Maryland. A total of 194 volunteers without prior military service or medical training completed the study. The participant stood in front of a waist-down mannequin that had an exposed leg. An observer read a scenario card aloud that described a mass casualty event. The observer then asked the participant to apply a Combat Application Tourniquet (C-A-T) to the mannequin. Test participants received a 4 × 6-inch card, with JiT instructions, in addition to their C-A-T; controls received no instructions. Participants were randomized in a 3:1 ratio of instructions to no instructions. The study's primary outcome was the proportion of successfully applied tourniquets by participants receiving JiT instructions compared to participants not receiving instructions. Secondary outcomes included the time for successful tourniquet placement, reasons for failed tourniquet application, and participants' self-reported willingness and comfort using tourniquets in real-life settings. Just-in-time instructions more than doubled successful tourniquet placement. Participants supplied with JiT instructions placed a tourniquet successfully 44.14% of the time, compared to 20.41% of the time for controls without instructions (risk ratio = 2.16; 95% confidence interval = 1.21 to 3.87; p = 0.003). Just-in-time instructions increase laypeople's successful application of C-A-T. This pilot study provides evidence that JiT instructions may assist the lay public in providing effective point-of-injury hemorrhage control. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  18. Formal description of the jumpstart just-in-time signaling protocol using EFSM

    Zaim, A. H.; Baldine, Ilia; Cassada, Mark; Rouskas, George N.; Perros, Harry G.; Stevenson, Daniel S.

    2002-07-01

    We present a formal protocol description for a Just-In-Time (JIT) signaling scheme running over a core dWDM network which utilizes Optical Burst Switches (OBS). We apply an eight-tuple extended finite state machine (EFSM) model to formally specify the protocol. Using the EFSM model, we define the communication between a source client node and a destination client node through an ingress and one or multiple intermediate switches. We worked on single burst connections that means setting up the connection just before sending a single burst and then closing the connection as soon as the burst is sent. The communication between the EFSMs is handled through message transfer between protocol entities.

  19. Exploring the Relationships Between Just-In-Time Technique and Manufacturing Performance: Empirical Evidence From Selected Nigerian Firms

    Ph. D. John Kolade Obamiro

    2009-01-01

    This study explores the relationship between just-in-time technique and manufacturing performance of some selected Nigerian companies. Just-in time was considered to be an overall organisational phenomenon. Data were obtained through a structured questionnaire from a sample size of 300 knowledgeable employees to test the developed model and formulated hypotheses that cover both just-intime and the supporting infrastructures. Bivariate correlation analysis was used to test the three hypotheses...

  20. A presentation system for just-in-time learning in radiology.

    Kahn, Charles E; Santos, Amadeu; Thao, Cheng; Rock, Jayson J; Nagy, Paul G; Ehlers, Kevin C

    2007-03-01

    There is growing interest in bringing medical educational materials to the point of care. We sought to develop a system for just-in-time learning in radiology. A database of 34 learning modules was derived from previously published journal articles. Learning objectives were specified for each module, and multiple-choice test items were created. A web-based system-called TEMPO-was developed to allow radiologists to select and view the learning modules. Web services were used to exchange clinical context information between TEMPO and the simulated radiology work station. Preliminary evaluation was conducted using the System Usability Scale (SUS) questionnaire. TEMPO identified learning modules that were relevant to the age, sex, imaging modality, and body part or organ system of the patient being viewed by the radiologist on the simulated clinical work station. Users expressed a high degree of satisfaction with the system's design and user interface. TEMPO enables just-in-time learning in radiology, and can be extended to create a fully functional learning management system for point-of-care learning in radiology.

  1. Poster - Thurs Eve-16: Just-in-time tomography (JiTT).

    Pang, G; Rowlands, J A

    2008-07-01

    Soft-tissue target motion is one of the main concerns in high-precision radiation therapy. Cone beam computed tomography (CBCT) has been developed recently to image soft-tissue targets in the treatment room for image-guided radiation therapy. However, due to its relatively long image acquisition time the CBCT approach cannot provide images of the target at the instant of the treatment and thus is not adequate for imaging targets with intrafraction motion. In this work, a new concept for image-guided radiation therapy- just-in-time tomography (JiTT) - is introduced. Differing from CBCT, JiTT takes much less time to generate the needed tomographical, beam's-eye-view images of the treatment target at the right moment to guide the radiation therapy treatment. A system to achieve JiTT is proposed and its feasibility is investigated. Research supported by Siemens. © 2008 American Association of Physicists in Medicine.

  2. JiTTree: A Just-in-Time Compiled Sparse GPU Volume Data Structure

    Labschutz, Matthias

    2015-08-12

    Sparse volume data structures enable the efficient representation of large but sparse volumes in GPU memory for computation and visualization. However, the choice of a specific data structure for a given data set depends on several factors, such as the memory budget, the sparsity of the data, and data access patterns. In general, there is no single optimal sparse data structure, but a set of several candidates with individual strengths and drawbacks. One solution to this problem are hybrid data structures which locally adapt themselves to the sparsity. However, they typically suffer from increased traversal overhead which limits their utility in many applications. This paper presents JiTTree, a novel sparse hybrid volume data structure that uses just-in-time compilation to overcome these problems. By combining multiple sparse data structures and reducing traversal overhead we leverage their individual advantages. We demonstrate that hybrid data structures adapt well to a large range of data sets. They are especially superior to other sparse data structures for data sets that locally vary in sparsity. Possible optimization criteria are memory, performance and a combination thereof. Through just-in-time (JIT) compilation, JiTTree reduces the traversal overhead of the resulting optimal data structure. As a result, our hybrid volume data structure enables efficient computations on the GPU, while being superior in terms of memory usage when compared to non-hybrid data structures.

  3. JiTTree: A Just-in-Time Compiled Sparse GPU Volume Data Structure

    Labschutz, Matthias; Bruckner, Stefan; Groller, M. Eduard; Hadwiger, Markus; Rautek, Peter

    2015-01-01

    Sparse volume data structures enable the efficient representation of large but sparse volumes in GPU memory for computation and visualization. However, the choice of a specific data structure for a given data set depends on several factors, such as the memory budget, the sparsity of the data, and data access patterns. In general, there is no single optimal sparse data structure, but a set of several candidates with individual strengths and drawbacks. One solution to this problem are hybrid data structures which locally adapt themselves to the sparsity. However, they typically suffer from increased traversal overhead which limits their utility in many applications. This paper presents JiTTree, a novel sparse hybrid volume data structure that uses just-in-time compilation to overcome these problems. By combining multiple sparse data structures and reducing traversal overhead we leverage their individual advantages. We demonstrate that hybrid data structures adapt well to a large range of data sets. They are especially superior to other sparse data structures for data sets that locally vary in sparsity. Possible optimization criteria are memory, performance and a combination thereof. Through just-in-time (JIT) compilation, JiTTree reduces the traversal overhead of the resulting optimal data structure. As a result, our hybrid volume data structure enables efficient computations on the GPU, while being superior in terms of memory usage when compared to non-hybrid data structures.

  4. JiTTree: A Just-in-Time Compiled Sparse GPU Volume Data Structure.

    Labschütz, Matthias; Bruckner, Stefan; Gröller, M Eduard; Hadwiger, Markus; Rautek, Peter

    2016-01-01

    Sparse volume data structures enable the efficient representation of large but sparse volumes in GPU memory for computation and visualization. However, the choice of a specific data structure for a given data set depends on several factors, such as the memory budget, the sparsity of the data, and data access patterns. In general, there is no single optimal sparse data structure, but a set of several candidates with individual strengths and drawbacks. One solution to this problem are hybrid data structures which locally adapt themselves to the sparsity. However, they typically suffer from increased traversal overhead which limits their utility in many applications. This paper presents JiTTree, a novel sparse hybrid volume data structure that uses just-in-time compilation to overcome these problems. By combining multiple sparse data structures and reducing traversal overhead we leverage their individual advantages. We demonstrate that hybrid data structures adapt well to a large range of data sets. They are especially superior to other sparse data structures for data sets that locally vary in sparsity. Possible optimization criteria are memory, performance and a combination thereof. Through just-in-time (JIT) compilation, JiTTree reduces the traversal overhead of the resulting optimal data structure. As a result, our hybrid volume data structure enables efficient computations on the GPU, while being superior in terms of memory usage when compared to non-hybrid data structures.

  5. Teaching Splinting Techniques Using a Just-in-Time Training Instructional Video.

    Cheng, Yu-Tsun; Liu, Deborah R; Wang, Vincent J

    2017-03-01

    Splinting is a multistep procedure that is seldom performed by primary care physicians. Just-in-time training (JITT) is an emerging teaching modality and can be an invaluable asset for infrequently performed procedures or in locations where teaching resources and trained professionals are limited. Our objective was to determine the utility of JITT for teaching medical students the short-arm (SA) volar splinting technique. This was a prospective randomized controlled pilot study. An instructional video on SA volar splinting was produced. Students viewed the video or had access to standard medical textbooks (control group) immediately before applying an SA volar splint. The students were assessed for the quality of the splint via a standard 6-point skills checklist. The times required for presplinting preparation and for completion of the splint were also measured. Just-in-time training group students scored higher on the splint checklist (mean [SD], 5.45 [1.06]; 95% confidence interval [CI], 4.99-5.92 vs mean [SD], 1.58 [1.12]; 95% CI, 1.04-2.12; P < 0.0001), had higher pass rates (73%; 95% CI, 53%-93% vs 0%; P < 0.0001), and required less time (minutes) for presplinting preparation (mean [SD], 7.86 [2.45]; 95% CI, 6.78-8.94 vs mean [SD], 9.89 [0.46]; 95% CI, 9.67-10.12; P < 0.0001) compared with the control group. No difference was seen in the time required to complete a splint, successful or not. In comparison with reading standard textbooks, watching a brief JITT instructional video before splinting yielded faster learning times combined with more successful procedural skills. The use of a JITT instructional video may have potential applications, including globally, as an alternative resource for teaching and disseminating procedural skills, such as SA volar splinting.

  6. Just-in-Time Compilation-Inspired Methodology for Parallelization of Compute Intensive Java Code

    GHULAM MUSTAFA

    2017-01-01

    Full Text Available Compute intensive programs generally consume significant fraction of execution time in a small amount of repetitive code. Such repetitive code is commonly known as hotspot code. We observed that compute intensive hotspots often possess exploitable loop level parallelism. A JIT (Just-in-Time compiler profiles a running program to identify its hotspots. Hotspots are then translated into native code, for efficient execution. Using similar approach, we propose a methodology to identify hotspots and exploit their parallelization potential on multicore systems. Proposed methodology selects and parallelizes each DOALL loop that is either contained in a hotspot method or calls a hotspot method. The methodology could be integrated in front-end of a JIT compiler to parallelize sequential code, just before native translation. However, compilation to native code is out of scope of this work. As a case study, we analyze eighteen JGF (Java Grande Forum benchmarks to determine parallelization potential of hotspots. Eight benchmarks demonstrate a speedup of up to 7.6x on an 8-core system

  7. Just-in-time compilation-inspired methodology for parallelization of compute intensive java code

    Mustafa, G.; Ghani, M.U.

    2017-01-01

    Compute intensive programs generally consume significant fraction of execution time in a small amount of repetitive code. Such repetitive code is commonly known as hotspot code. We observed that compute intensive hotspots often possess exploitable loop level parallelism. A JIT (Just-in-Time) compiler profiles a running program to identify its hotspots. Hotspots are then translated into native code, for efficient execution. Using similar approach, we propose a methodology to identify hotspots and exploit their parallelization potential on multicore systems. Proposed methodology selects and parallelizes each DOALL loop that is either contained in a hotspot method or calls a hotspot method. The methodology could be integrated in front-end of a JIT compiler to parallelize sequential code, just before native translation. However, compilation to native code is out of scope of this work. As a case study, we analyze eighteen JGF (Java Grande Forum) benchmarks to determine parallelization potential of hotspots. Eight benchmarks demonstrate a speedup of up to 7.6x on an 8-core system. (author)

  8. Just-in-Time Compound Pooling Increases Primary Screening Capacity without Compromising Screening Quality.

    Elkin, L L; Harden, D G; Saldanha, S; Ferguson, H; Cheney, D L; Pieniazek, S N; Maloney, D P; Zewinski, J; O'Connell, J; Banks, M

    2015-06-01

    Compound pooling, or multiplexing more than one compound per well during primary high-throughput screening (HTS), is a controversial approach with a long history of limited success. Many issues with this approach likely arise from long-term storage of library plates containing complex mixtures of compounds at high concentrations. Due to the historical difficulties with using multiplexed library plates, primary HTS often uses a one-compound-one-well approach. However, as compound collections grow, innovative strategies are required to increase the capacity of primary screening campaigns. Toward this goal, we have developed a novel compound pooling method that increases screening capacity without compromising data quality. This method circumvents issues related to the long-term storage of complex compound mixtures by using acoustic dispensing to enable "just-in-time" compound pooling directly in the assay well immediately prior to assay. Using this method, we can pool two compounds per well, effectively doubling the capacity of a primary screen. Here, we present data from pilot studies using just-in-time pooling, as well as data from a large >2-million-compound screen using this approach. These data suggest that, for many targets, this method can be used to vastly increase screening capacity without significant reduction in the ability to detect screening hits. © 2015 Society for Laboratory Automation and Screening.

  9. Time to Thrive, Not Just Survive: Accumulating Advantage for Women in Science

    Rolison, Debra

    2005-04-01

    Our departments of science, technology, mathematics, and engineering (STEM) need more women as faculty, and not only to show their undergraduates that a career in academia is a viable path. Their absence warns us that an unhealthy environment exists: unhealthy to those scientists who want fulfilling lives beyond academe and unhealthy to those women, who once they demonstrate productivity, scholarship, and mentorship, still reap less respect, space, salary, funding, and awards than their male colleagues. The recalcitrance of too many of our research universities toward diversifying their faculty is a national disgrace in that these universities covet a diversified student body, but do not reflect that pool of talent onto their faculty. Similar difficulties are apparent among the staff of National and Federal laboratories. Self-reform is not getting it done, and is especially frustrating in light of the historic opportunity to change the demographics as scientists and engineers hired in the 1960s retire. Is it time to apply the logic of Title IX--the loss of Federal funds--for the entrenched inability to increase the number of women represented on STEM faculties? Such a threat may be the impetus necessary for university administrators to create departmental environments that women are willing to call home. The July 2004 release of the GAO report on Women's Participation in the Sciences (which also surveyed DOE facilities) reminded those Federal agencies that fund scientific research that Title IX is the law and that these agencies must begin Title IX assessments of compliance in the STEM departments and institutions they fund. It is past time that women thrive, not just survive in their career homes. Using the mechanistic philosophy of Title IX--denial of resources to recalacitrant departments and laboratories--may be the start of a truly inclusive scientific enterprise in the United States. We must accept this opportunity to redirect the nature of the research

  10. Diagnostic instrumentation aboard ISS: just-in-time training for non-physician crewmembers

    Foale, C. Michael; Kaleri, Alexander Y.; Sargsyan, Ashot E.; Hamilton, Douglas R.; Melton, Shannon; Martin, David; Dulchavsky, Scott A.

    2005-01-01

    INTRODUCTION: The performance of complex tasks on the International Space Station (ISS) requires significant preflight crew training commitments and frequent skill and knowledge refreshment. This report documents a recently developed "just-in-time" training methodology, which integrates preflight hardware familiarization and procedure training with an on-orbit CD-ROM-based skill enhancement. This "just-in-time" concept was used to support real-time remote expert guidance to complete ultrasound examinations using the ISS Human Research Facility (HRF). METHODS: An American and Russian ISS crewmember received 2 h of "hands on" ultrasound training 8 mo prior to the on-orbit ultrasound exam. A CD-ROM-based Onboard Proficiency Enhancement (OPE) interactive multimedia program consisting of memory enhancing tutorials, and skill testing exercises, was completed by the crewmember 6 d prior to the on-orbit ultrasound exam. The crewmember was then remotely guided through a thoracic, vascular, and echocardiographic examination by ultrasound imaging experts. RESULTS: Results of the CD-ROM-based OPE session were used to modify the instructions during a complete 35-min real-time thoracic, cardiac, and carotid/jugular ultrasound study. Following commands from the ground-based expert, the crewmember acquired all target views and images without difficulty. The anatomical content and fidelity of ultrasound video were adequate for clinical decision making. CONCLUSIONS: Complex ultrasound experiments with expert guidance were performed with high accuracy following limited preflight training and multimedia based in-flight review, despite a 2-s communication latency. In-flight application of multimedia proficiency enhancement software, coupled with real-time remote expert guidance, facilitates the successful performance of ultrasound examinations on orbit and may have additional terrestrial and space applications.

  11. Exploring the Relationships Between Just-In-Time Technique and Manufacturing Performance: Empirical Evidence From Selected Nigerian Firms

    Ph. D. John Kolade Obamiro

    2009-12-01

    Full Text Available This study explores the relationship between just-in-time technique and manufacturing performance of some selected Nigerian companies. Just-in time was considered to be an overall organisational phenomenon. Data were obtained through a structured questionnaire from a sample size of 300 knowledgeable employees to test the developed model and formulated hypotheses that cover both just-intime and the supporting infrastructures. Bivariate correlation analysis was used to test the three hypotheses. The results showed that: (1 there was a significant relationship between total quality management (supporting infrastructure and just-in-time practices; (2 Human resources management (supporting infrastructure was positively related to just-in-time practices; (3 there was a positive significant relationship between Just-in-time practices and manufacturing performance. These results demonstrate that justin- time practices can be successfully implemented if certain supporting infrastructures are provided, and also support the notion that just-in-time should be practiced at all levels and departments of the organisation, rather than viewing it strictly for shop floor workers.

  12. Just a Matter of Time.

    Smith, Frank

    2001-01-01

    Struggling students are often victimized by time constraints--arbitrarily imposed timetables for mastering material and meeting standards. People learn best from experience, not by information acquisition, skill development, rote memorization, or assessment. Reading, writing, arithmetic, scientific understanding, and civics require student…

  13. ADMINISTRAÇÃO DA PRODUÇÃO FOCADA EM JUST IN TIME E MELHORIA CONTÍNUA

    Allan Elias Silva

    2014-08-01

    Full Text Available In this approach was presented the relevance and challenges of producing with excellence and effective controls production. The production chain involves many aspects that must be observed widely so that we can facilitate more and more manufacturing processes. The objective of this study is to analyze and understand production management processes, such as the best tools that can be used to optimize them, such as Just in Time system that lets you work with the elimination of all aspects that do not add value to manufacturing, such as waste and resupply of idleness. The Article also explores the continuous improvement methods (lean production which also govern procedures for the internal environment, have priority through mechanisms that make them more efficient. The research methodologies were applied and explanatory, where through the qualitative method provided details of the above content.

  14. Near-Optimal Heuristics for Just-In-Time Jobs Maximization in Flow Shop Scheduling

    Helio Yochihiro Fuchigami

    2018-04-01

    Full Text Available The number of just-in-time jobs maximization in a permutation flow shop scheduling problem is considered. A mixed integer linear programming model to represent the problem as well as solution approaches based on enumeration and constructive heuristics were proposed and computationally implemented. Instances with up to 10 jobs and five machines are solved by the mathematical model in an acceptable running time (3.3 min on average while the enumeration method consumes, on average, 1.5 s. The 10 constructive heuristics proposed show they are practical especially for large-scale instances (up to 100 jobs and 20 machines, with very good-quality results and efficient running times. The best two heuristics obtain near-optimal solutions, with only 0.6% and 0.8% average relative deviations. They prove to be better than adaptations of the NEH heuristic (well-known for providing very good solutions for makespan minimization in flow shop for the considered problem.

  15. Nucleic acid programmable protein array a just-in-time multiplexed protein expression and purification platform.

    Qiu, Ji; LaBaer, Joshua

    2011-01-01

    Systematic study of proteins requires the availability of thousands of proteins in functional format. However, traditional recombinant protein expression and purification methods have many drawbacks for such study at the proteome level. We have developed an innovative in situ protein expression and capture system, namely NAPPA (nucleic acid programmable protein array), where C-terminal tagged proteins are expressed using an in vitro expression system and efficiently captured/purified by antitag antibodies coprinted at each spot. The NAPPA technology presented in this chapter enable researchers to produce and display fresh proteins just in time in a multiplexed high-throughput fashion and utilize them for various downstream biochemical researches of interest. This platform could revolutionize the field of functional proteomics with it ability to produce thousands of spatially separated proteins in high density with narrow dynamic rand of protein concentrations, reproducibly and functionally. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Qualitative evaluation of just-in-time simulation-based learning: the learners' perspective.

    Kamdar, Gunjan; Kessler, David O; Tilt, Lindsey; Srivastava, Geetanjali; Khanna, Kajal; Chang, Todd P; Balmer, Dorene; Auerbach, Marc

    2013-02-01

    Just-in-time training (JITT) is an educational strategy where training occurs in close temporal proximity to a clinical encounter. A multicenter study evaluated the impact of simulation-based JITT on interns' infant lumbar puncture (LP) success rates. Concurrent with this multicenter study, we conducted a qualitative evaluation to describe learner perceptions of this modality of skills training. Eleven interns from a single institution participated in a face-to-face semistructured interview exploring their JITT experience. Interviews were audio-recorded and transcribed. Two investigators reviewed the transcripts, assigned codes to the data, and categorized the codes. Categories were modified by 4 emergency physicians. As a means of data triangulation, we performed focus groups at a second institution. Benefits of JITT included review of anatomic landmarks, procedural rehearsal, and an opportunity to ask questions. These perceived benefits improved confidence with infant LP. Deficits of the training included lack of mannequin fidelity and unrealistic context when compared with an actual LP. An unexpected category, which emerged from our analysis, was that of barriers to JITT performance. Barriers included lack of time in a busy clinical setting and various instructor factors. The focus group findings confirmed and elaborated the benefits and deficits of JITT and the barriers to JITT performance. Just-in-time training improved procedural confidence with infant LP, but work place busyness and instructor lack of support or unawareness were barriers to JITT performance. Optimal LP JITT would occur with improved contextual fidelity. More research is needed to determine optimal training strategies that are effective for the learner and maximize clinical outcomes for the patient.

  17. A Just-in-Time Learning based Monitoring and Classification Method for Hyper/Hypocalcemia Diagnosis.

    Peng, Xin; Tang, Yang; He, Wangli; Du, Wenli; Qian, Feng

    2017-01-20

    This study focuses on the classification and pathological status monitoring of hyper/hypo-calcemia in the calcium regulatory system. By utilizing the Independent Component Analysis (ICA) mixture model, samples from healthy patients are collected, diagnosed, and subsequently classified according to their underlying behaviors, characteristics, and mechanisms. Then, a Just-in-Time Learning (JITL) has been employed in order to estimate the diseased status dynamically. In terms of JITL, for the purpose of the construction of an appropriate similarity index to identify relevant datasets, a novel similarity index based on the ICA mixture model is proposed in this paper to improve online model quality. The validity and effectiveness of the proposed approach have been demonstrated by applying it to the calcium regulatory system under various hypocalcemic and hypercalcemic diseased conditions.

  18. Investigating the barriers of using just in time purchasing system for publically traded firms in Tehran stock exchange

    Ghodrat Allah Haidari nejad

    2012-04-01

    Full Text Available Just in time is one of the most important components of having efficient production plan. The primary objective of JIT is to reduce the amount of storage as much as possible to remove the cost of inventories and work-in-progress. However, the implementation of JIT is a tedious task especially in developing countries, where there are shortages for essential infrastructures and increase the risk of production in case of JIT adaptation. In this paper, we present a survey to detect important factors preventing JIT implementation in Iran. The proposed study designs a questionnaire for assessing important factors influencing JIT adaptation, which includes inflation, political sanction, unreliable suppliers, shortage of cash flow and weak organizational culture. The results of our survey confirm that shortage of cash flow is the most important factor, follows by economical sanction and inflation.

  19. Heuristic and Exact Algorithms for the Two-Machine Just in Time Job Shop Scheduling Problem

    Mohammed Al-Salem

    2016-01-01

    Full Text Available The problem addressed in this paper is the two-machine job shop scheduling problem when the objective is to minimize the total earliness and tardiness from a common due date (CDD for a set of jobs when their weights equal 1 (unweighted problem. This objective became very significant after the introduction of the Just in Time manufacturing approach. A procedure to determine whether the CDD is restricted or unrestricted is developed and a semirestricted CDD is defined. Algorithms are introduced to find the optimal solution when the CDD is unrestricted and semirestricted. When the CDD is restricted, which is a much harder problem, a heuristic algorithm is proposed to find approximate solutions. Through computational experiments, the heuristic algorithms’ performance is evaluated with problems up to 500 jobs.

  20. Visualization of Time-Series Sensor Data to Inform the Design of Just-In-Time Adaptive Stress Interventions.

    Sharmin, Moushumi; Raij, Andrew; Epstien, David; Nahum-Shani, Inbal; Beck, J Gayle; Vhaduri, Sudip; Preston, Kenzie; Kumar, Santosh

    2015-09-01

    We investigate needs, challenges, and opportunities in visualizing time-series sensor data on stress to inform the design of just-in-time adaptive interventions (JITAIs). We identify seven key challenges: massive volume and variety of data, complexity in identifying stressors, scalability of space, multifaceted relationship between stress and time, a need for representation at multiple granularities, interperson variability, and limited understanding of JITAI design requirements due to its novelty. We propose four new visualizations based on one million minutes of sensor data (n=70). We evaluate our visualizations with stress researchers (n=6) to gain first insights into its usability and usefulness in JITAI design. Our results indicate that spatio-temporal visualizations help identify and explain between- and within-person variability in stress patterns and contextual visualizations enable decisions regarding the timing, content, and modality of intervention. Interestingly, a granular representation is considered informative but noise-prone; an abstract representation is the preferred starting point for designing JITAIs.

  1. Just in Time DSA-The Hanford Nuclear Safety Basis Strategy

    Olinger, S. J.; Buhl, A. R.

    2002-01-01

    The U.S. Department of Energy, Richland Operations Office (RL) is responsible for 30 hazard category 2 and 3 nuclear facilities that are operated by its prime contractors, Fluor Hanford Incorporated (FHI), Bechtel Hanford, Incorporated (BHI) and Pacific Northwest National Laboratory (PNNL). The publication of Title 10, Code of Federal Regulations, Part 830, Subpart B, Safety Basis Requirements (the Rule) in January 2001 imposed the requirement that the Documented Safety Analyses (DSA) for these facilities be reviewed against the requirements of the Rule. Those DSA that do not meet the requirements must either be upgraded to satisfy the Rule, or an exemption must be obtained. RL and its prime contractors have developed a Nuclear Safety Strategy that provides a comprehensive approach for supporting RL's efforts to meet its long term objectives for hazard category 2 and 3 facilities while also meeting the requirements of the Rule. This approach will result in a reduction of the total number of safety basis documents that must be developed and maintained to support the remaining mission and closure of the Hanford Site and ensure that the documentation that must be developed will support: compliance with the Rule; a ''Just-In-Time'' approach to development of Rule-compliant safety bases supported by temporary exemptions; and consolidation of safety basis documents that support multiple facilities with a common mission (e.g. decontamination, decommissioning and demolition [DD and D], waste management, surveillance and maintenance). This strategy provides a clear path to transition the safety bases for the various Hanford facilities from support of operation and stabilization missions through DD and D to accelerate closure. This ''Just-In-Time'' Strategy can also be tailored for other DOE Sites, creating the potential for large cost savings and schedule reductions throughout the DOE complex

  2. Just in Time DSA-The Hanford Nuclear Safety Basis Strategy

    Olinger, S. J.; Buhl, A. R.

    2002-02-26

    The U.S. Department of Energy, Richland Operations Office (RL) is responsible for 30 hazard category 2 and 3 nuclear facilities that are operated by its prime contractors, Fluor Hanford Incorporated (FHI), Bechtel Hanford, Incorporated (BHI) and Pacific Northwest National Laboratory (PNNL). The publication of Title 10, Code of Federal Regulations, Part 830, Subpart B, Safety Basis Requirements (the Rule) in January 2001 imposed the requirement that the Documented Safety Analyses (DSA) for these facilities be reviewed against the requirements of the Rule. Those DSA that do not meet the requirements must either be upgraded to satisfy the Rule, or an exemption must be obtained. RL and its prime contractors have developed a Nuclear Safety Strategy that provides a comprehensive approach for supporting RL's efforts to meet its long term objectives for hazard category 2 and 3 facilities while also meeting the requirements of the Rule. This approach will result in a reduction of the total number of safety basis documents that must be developed and maintained to support the remaining mission and closure of the Hanford Site and ensure that the documentation that must be developed will support: compliance with the Rule; a ''Just-In-Time'' approach to development of Rule-compliant safety bases supported by temporary exemptions; and consolidation of safety basis documents that support multiple facilities with a common mission (e.g. decontamination, decommissioning and demolition [DD&D], waste management, surveillance and maintenance). This strategy provides a clear path to transition the safety bases for the various Hanford facilities from support of operation and stabilization missions through DD&D to accelerate closure. This ''Just-In-Time'' Strategy can also be tailored for other DOE Sites, creating the potential for large cost savings and schedule reductions throughout the DOE complex.

  3. Sistema Toyota de produção: mais do que simplesmente Just-in-Time

    Ghinato,Paulo

    1995-01-01

    As interpretações acerca do Sistema Toyota de Produção (STP), apontando o Just-In-Time e o Kanban como sua essência, demostram um entendimento limitado de sua verdadeira abrangência e potencialidade. O STP está estruturado sobre a base da completa eliminação das perdas, tendo o JIT e a autonomação como seus dois pilares de sustentação. O Controle da Qualidade Zero Defeitos (CQZD) aparece, também, como elemento essencial para a operacionalização da autonomação e funcionalidade de todo o sistem...

  4. Microrandomized trials: An experimental design for developing just-in-time adaptive interventions.

    Klasnja, Predrag; Hekler, Eric B; Shiffman, Saul; Boruvka, Audrey; Almirall, Daniel; Tewari, Ambuj; Murphy, Susan A

    2015-12-01

    This article presents an experimental design, the microrandomized trial, developed to support optimization of just-in-time adaptive interventions (JITAIs). JITAIs are mHealth technologies that aim to deliver the right intervention components at the right times and locations to optimally support individuals' health behaviors. Microrandomized trials offer a way to optimize such interventions by enabling modeling of causal effects and time-varying effect moderation for individual intervention components within a JITAI. The article describes the microrandomized trial design, enumerates research questions that this experimental design can help answer, and provides an overview of the data analyses that can be used to assess the causal effects of studied intervention components and investigate time-varying moderation of those effects. Microrandomized trials enable causal modeling of proximal effects of the randomized intervention components and assessment of time-varying moderation of those effects. Microrandomized trials can help researchers understand whether their interventions are having intended effects, when and for whom they are effective, and what factors moderate the interventions' effects, enabling creation of more effective JITAIs. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

  5. Micro-Randomized Trials: An Experimental Design for Developing Just-in-Time Adaptive Interventions

    Klasnja, Predrag; Hekler, Eric B.; Shiffman, Saul; Boruvka, Audrey; Almirall, Daniel; Tewari, Ambuj; Murphy, Susan A.

    2015-01-01

    Objective This paper presents an experimental design, the micro-randomized trial, developed to support optimization of just-in-time adaptive interventions (JITAIs). JITAIs are mHealth technologies that aim to deliver the right intervention components at the right times and locations to optimally support individuals’ health behaviors. Micro-randomized trials offer a way to optimize such interventions by enabling modeling of causal effects and time-varying effect moderation for individual intervention components within a JITAI. Methods The paper describes the micro-randomized trial design, enumerates research questions that this experimental design can help answer, and provides an overview of the data analyses that can be used to assess the causal effects of studied intervention components and investigate time-varying moderation of those effects. Results Micro-randomized trials enable causal modeling of proximal effects of the randomized intervention components and assessment of time-varying moderation of those effects. Conclusions Micro-randomized trials can help researchers understand whether their interventions are having intended effects, when and for whom they are effective, and what factors moderate the interventions’ effects, enabling creation of more effective JITAIs. PMID:26651463

  6. A Study on the Enhanced Best Performance Algorithm for the Just-in-Time Scheduling Problem

    Sivashan Chetty

    2015-01-01

    Full Text Available The Just-In-Time (JIT scheduling problem is an important subject of study. It essentially constitutes the problem of scheduling critical business resources in an attempt to optimize given business objectives. This problem is NP-Hard in nature, hence requiring efficient solution techniques. To solve the JIT scheduling problem presented in this study, a new local search metaheuristic algorithm, namely, the enhanced Best Performance Algorithm (eBPA, is introduced. This is part of the initial study of the algorithm for scheduling problems. The current problem setting is the allocation of a large number of jobs required to be scheduled on multiple and identical machines which run in parallel. The due date of a job is characterized by a window frame of time, rather than a specific point in time. The performance of the eBPA is compared against Tabu Search (TS and Simulated Annealing (SA. SA and TS are well-known local search metaheuristic algorithms. The results show the potential of the eBPA as a metaheuristic algorithm.

  7. Just-in-time training of dental responders in a simulated pandemic immunization response exercise.

    Colvard, Michael D; Hirst, Jeremy L; Vesper, Benjamin J; DeTella, George E; Tsagalis, Mila P; Roberg, Mary J; Peters, David E; Wallace, Jimmy D; James, James J

    2014-06-01

    The reauthorization of the Pandemic and All-Hazards Preparedness Act in 2013 incorporated the dental profession and dental professionals into the federal legislation governing public health response to pandemics and all-hazard situations. Work is now necessary to expand the processes needed to incorporate and train oral health care professionals into pandemic and all-hazard response events. A just-in-time (JIT) training exercise and immunization drill using an ex vivo porcine model system was conducted to demonstrate the rapidity to which dental professionals can respond to a pandemic influenza scenario. Medical history documentation, vaccination procedures, and patient throughput and error rates of 15 dental responders were evaluated by trained nursing staff and emergency response personnel. The average throughput (22.33/hr) and medical error rates (7 of 335; 2.08%) of the dental responders were similar to those found in analogous influenza mass vaccination clinics previously conducted using certified public health nurses. The dental responder immunization drill validated the capacity and capability of dental professionals to function as a valuable immunization resource. The ex vivo porcine model system used for JIT training can serve as a simple and inexpensive training tool to update pandemic responders' immunization techniques and procedures supporting inoculation protocols.

  8. Just-in-time information improved decision-making in primary care: a randomized controlled trial.

    Jessie McGowan

    Full Text Available BACKGROUND: The "Just-in-time Information" (JIT librarian consultation service was designed to provide rapid information to answer primary care clinical questions during patient hours. This study evaluated whether information provided by librarians to answer clinical questions positively impacted time, decision-making, cost savings and satisfaction. METHODS AND FINDING: A randomized controlled trial (RCT was conducted between October 2005 and April 2006. A total of 1,889 questions were sent to the service by 88 participants. The object of the randomization was a clinical question. Each participant had clinical questions randomly allocated to both intervention (librarian information and control (no librarian information groups. Participants were trained to send clinical questions via a hand-held device. The impact of the information provided by the service (or not provided by the service, additional resources and time required for both groups was assessed using a survey sent 24 hours after a question was submitted. The average time for JIT librarians to respond to all questions was 13.68 minutes/question (95% CI, 13.38 to 13.98. The average time for participants to respond their control questions was 20.29 minutes/question (95% CI, 18.72 to 21.86. Using an impact assessment scale rating cognitive impact, participants rated 62.9% of information provided to intervention group questions as having a highly positive cognitive impact. They rated 14.8% of their own answers to control question as having a highly positive cognitive impact, 44.9% has having a negative cognitive impact, and 24.8% with no cognitive impact at all. In an exit survey measuring satisfaction, 86% (62/72 responses of participants scored the service as having a positive impact on care and 72% (52/72 indicated that they would use the service frequently if it were continued. CONCLUSIONS: In this study, providing timely information to clinical questions had a highly positive impact on

  9. Just-in-time information improved decision-making in primary care: a randomized controlled trial.

    McGowan, Jessie; Hogg, William; Campbell, Craig; Rowan, Margo

    2008-01-01

    The "Just-in-time Information" (JIT) librarian consultation service was designed to provide rapid information to answer primary care clinical questions during patient hours. This study evaluated whether information provided by librarians to answer clinical questions positively impacted time, decision-making, cost savings and satisfaction. A randomized controlled trial (RCT) was conducted between October 2005 and April 2006. A total of 1,889 questions were sent to the service by 88 participants. The object of the randomization was a clinical question. Each participant had clinical questions randomly allocated to both intervention (librarian information) and control (no librarian information) groups. Participants were trained to send clinical questions via a hand-held device. The impact of the information provided by the service (or not provided by the service), additional resources and time required for both groups was assessed using a survey sent 24 hours after a question was submitted. The average time for JIT librarians to respond to all questions was 13.68 minutes/question (95% CI, 13.38 to 13.98). The average time for participants to respond their control questions was 20.29 minutes/question (95% CI, 18.72 to 21.86). Using an impact assessment scale rating cognitive impact, participants rated 62.9% of information provided to intervention group questions as having a highly positive cognitive impact. They rated 14.8% of their own answers to control question as having a highly positive cognitive impact, 44.9% has having a negative cognitive impact, and 24.8% with no cognitive impact at all. In an exit survey measuring satisfaction, 86% (62/72 responses) of participants scored the service as having a positive impact on care and 72% (52/72) indicated that they would use the service frequently if it were continued. In this study, providing timely information to clinical questions had a highly positive impact on decision-making and a high approval rating from

  10. Delivering "Just-In-Time" Smoking Cessation Support Via Mobile Phones: Current Knowledge and Future Directions.

    Naughton, Felix

    2016-05-28

    Smoking lapses early on during a quit attempt are highly predictive of failing to quit. A large proportion of these lapses are driven by cravings brought about by situational and environmental cues. Use of cognitive-behavioral lapse prevention strategies to combat cue-induced cravings is associated with a reduced risk of lapse, but evidence is lacking in how these strategies can be effectively promoted. Unlike most traditional methods of delivering behavioral support, mobile phones can in principle deliver automated support, including lapse prevention strategy recommendations, Just-In-Time (JIT) for when a smoker is most vulnerable, and prevent early lapse. JIT support can be activated by smokers themselves (user-triggered), by prespecified rules (server-triggered) or through sensors that dynamically monitor a smoker's context and trigger support when a high risk environment is sensed (context-triggered), also known as a Just-In-Time Adaptive Intervention (JITAI). However, research suggests that user-triggered JIT cessation support is seldom used and existing server-triggered JIT support is likely to lack sufficient accuracy to effectively target high-risk situations in real time. Evaluations of mobile phone cessation interventions that include user and/or server-triggered JIT support have yet to adequately assess whether this improves management of high risk situations. While context-triggered systems have the greatest potential to deliver JIT support, there are, as yet, no impact evaluations of such systems. Although it may soon be feasible to learn about and monitor a smoker's context unobtrusively using their smartphone without burdensome data entry, there are several potential advantages to involving the smoker in data collection. This commentary describes the current knowledge on the potential for mobile phones to deliver automated support to help smokers manage or cope with high risk environments or situations for smoking, known as JIT support. The article

  11. Reduction of energy intake using just-in-time feedback from a wearable sensor system.

    Farooq, Muhammad; McCrory, Megan A; Sazonov, Edward

    2017-04-01

    This work explored the potential use of a wearable sensor system for providing just-in-time (JIT) feedback on the progression of a meal and tested its ability to reduce the total food mass intake. Eighteen participants consumed three meals each in a lab while monitored by a wearable sensor system capable of accurately tracking chew counts. The baseline visit was used to establish the self-determined ingested mass and the associated chew counts. Real-time feedback on chew counts was provided in the next two visits, during which the target chew count was either the same as that at baseline or the baseline chew count reduced by 25% (in randomized order). The target was concealed from the participant and from the experimenter. Nonparametric repeated-measures ANOVAs were performed to compare mass of intake, meal duration, and ratings of hunger, appetite, and thirst across three meals. JIT feedback targeting a 25% reduction in chew counts resulted in a reduction in mass and energy intake without affecting perceived hunger or fullness. JIT feedback on chewing behavior may reduce intake within a meal. This system can be further used to help develop individualized strategies to provide JIT adaptive interventions for reducing energy intake. © 2017 The Obesity Society.

  12. Variable Neighbourhood Search and Mathematical Programming for Just-in-Time Job-Shop Scheduling Problem

    Sunxin Wang

    2014-01-01

    Full Text Available This paper presents a combination of variable neighbourhood search and mathematical programming to minimize the sum of earliness and tardiness penalty costs of all operations for just-in-time job-shop scheduling problem (JITJSSP. Unlike classical E/T scheduling problem with each job having its earliness or tardiness penalty cost, each operation in this paper has its earliness and tardiness penalties, which are paid if the operation is completed before or after its due date. Our hybrid algorithm combines (i a variable neighbourhood search procedure to explore the huge feasible solution spaces efficiently by alternating the swap and insertion neighbourhood structures and (ii a mathematical programming model to optimize the completion times of the operations for a given solution in each iteration procedure. Additionally, a threshold accepting mechanism is proposed to diversify the local search of variable neighbourhood search. Computational results on the 72 benchmark instances show that our algorithm can obtain the best known solution for 40 problems, and the best known solutions for 33 problems are updated.

  13. Public awareness and disaster risk reduction: just-in-time networks and learning.

    Ardalan, Ali; Linkov, Faina; Shubnikov, Eugene; LaPorte, Ronald E

    2008-01-01

    Improving public awareness through education has been recognized widely as a basis for reducing the risk of disasters. Some of the first disaster just-in-time (JIT) education modules were built within 3-6 days after the south Asia tsunami, Hurricane Katrina, and the Bam, Pakistan, and Indonesia earthquakes through a Supercourse. Web monitoring showed that visitors represented a wide spectrum of disciplines and educational levels from 120 developed and developing countries. Building disaster networks using an educational strategy seizes the opportunity of increased public interest to teach and find national and global expertise in hazard and risk information. To be effective, an expert network and a template for the delivery of JIT education must be prepared before an event occurs, focusing on developing core materials that could be customized rapidly, and then be based on the information received from a recent disaster. The recyclable process of the materials would help to improve the quality of the teaching, and decrease the time required for preparation. The core materials can be prepared for disasters resulting from events such as earthquakes, hurricanes, tsunamis, floods, and bioterrorism.

  14. Just-in-time adaptive classifiers-part II: designing the classifier.

    Alippi, Cesare; Roveri, Manuel

    2008-12-01

    Aging effects, environmental changes, thermal drifts, and soft and hard faults affect physical systems by changing their nature and behavior over time. To cope with a process evolution adaptive solutions must be envisaged to track its dynamics; in this direction, adaptive classifiers are generally designed by assuming the stationary hypothesis for the process generating the data with very few results addressing nonstationary environments. This paper proposes a methodology based on k-nearest neighbor (NN) classifiers for designing adaptive classification systems able to react to changing conditions just-in-time (JIT), i.e., exactly when it is needed. k-NN classifiers have been selected for their computational-free training phase, the possibility to easily estimate the model complexity k and keep under control the computational complexity of the classifier through suitable data reduction mechanisms. A JIT classifier requires a temporal detection of a (possible) process deviation (aspect tackled in a companion paper) followed by an adaptive management of the knowledge base (KB) of the classifier to cope with the process change. The novelty of the proposed approach resides in the general framework supporting the real-time update of the KB of the classification system in response to novel information coming from the process both in stationary conditions (accuracy improvement) and in nonstationary ones (process tracking) and in providing a suitable estimate of k. It is shown that the classification system grants consistency once the change targets the process generating the data in a new stationary state, as it is the case in many real applications.

  15. North American NGL exciting times are just ahead

    Gist, R.L.; Otto, K.W.

    1998-01-01

    Although it is a fairly conservative consulting company, Purvin and Gertz believes that exciting times are just ahead for the North American NGL industry. In the United States, NGL production will be rising rapidly, particularly in the Gulf of Mexico offshore from Louisiana. Demand will also be increasing in many sectors, with the largest increases as petrochemical feedstocks. Similarly, in Canada natural gas export pipelines will result in higher gas and NGL production. Petrochemicals will also play a large role in rapidly rising demand for NGL. Lastly, in Mexico quickly growing demand for natural gas to produce electrical power will push up NGL production

  16. Enhanced just-in-time plus protocol for optical burst switching networks

    Rodrigues, Joel J. P. C.; Gregório, José M. B.; Vasilakos, Athanasios V.

    2010-07-01

    We propose a new one-way resource reservation protocol for optical burst switching (OBS) networks, called Enhanced Just-in-Time Plus (E-JIT+). The protocol is described in detail, and its formal specification is presented, following an extended finite state machine approach. The performance evaluation of E-JIT+ is analyzed in comparison with other proposed OBS protocols (JIT+ and E-JIT) for the following network topologies: rings; degree-two, degree-three, and degree-four chordal rings; mesh-torus; NSFNET; ARPANET; FCCN-NET; and the European Optical Network. We evaluate and compare the performance of the different protocols in terms of burst loss probability, taking into account the most important OBS network parameters. It was shown that E-JIT+ performs better than available one-way resource reservation protocols for all the evaluated network topologies. Moreover, the scalability of E-JIT+ was observed, and when the network traffic increases, the burst loss probability also increases, leading to a worse network performance.

  17. Wireless just-in-time training of mobile skilled support personnel

    Bandera, Cesar; Marsico, Michael; Rosen, Mitchel; Schlegel, Barry

    2006-05-01

    Skilled Support Personnel (SSP) serve emergency response organizations during an emergency incident, and include laborers, operating engineers, carpenters, ironworkers, sanitation workers and utility workers. SSP called to an emergency incident rarely have recent detailed training on the chemical, biological, radiological, nuclear and/or explosives (CBRNE) agents or the personal protection equipment (PPE) relevant to the incident. This increases personal risk to the SSP and mission risk at the incident site. Training for SSP has been identified as a critical need by the National Institute for Environmental Health Sciences, Worker Education and Training Program. We present a system being developed to address this SSP training shortfall by exploiting a new training paradigm called just-in-time training (JITT) made possible by advances in distance learning and cellular telephony. In addition to the current conventional training at regularly scheduled instructional events, SSP called to an emergency incident will have secure access to short (technologies and wireless service providers, integration with the incident management system, and SCORM compliance.

  18. Effectiveness of three just-in-time training modalities for N-95 mask fit testing.

    Jones, David; Stoler, Genevieve; Suyama, Joe

    2013-01-01

    To compare and contrast three different training modalities for fit testing N-95 respirator face masks. Block randomized interventional study. Urban university. Two hundred eighty-nine medical students. Students were randomly assigned to video, lecture, or slide show to evaluate the effectiveness of the methods for fit testing large groups of people. Ease of fit and success of fit for each instructional technique. Mask 1 was a Kimberly-Clark duckbill N-95 respirator mask, and mask 2 was a 3M™ carpenters N-95 respirator mask. "Ease of fit" was defined as the ability to successfully don a mask in less than 30 seconds. "Success of fit" was defined as the ability to correctly don a mask in one try. There were no statistical differences by training modality for either mask regarding ease of fit or success of fit. There were no differences among video presentation, small group demonstration, and self-directed slide show just-in-time training modalities for ease of fit or success of fit N-95 respirator mask fitting. Further study is needed to explore more effective fit training modalities.

  19. Just-in-Time Teaching in undergraduate physics courses: Implementation, learning, and perceptions

    Dwyer, Jessica Hewitt

    Regardless of discipline, a decades-long battle has ensued within nearly every classroom in higher education: instructors getting students to come to class prepared to learn. In response to this clash between teacher expectations and frequent student neglect, a group of four physics education researchers developed a reformed instructional strategy called Just-in-Time Teaching (JiTT). This dissertation investigates the following three areas: 1) the fidelity with which undergraduate physics instructors implement JiTT, 2) whether student performance predicts student perception of their instructor's fidelity of JiTT implementation, and 3) whether student perception of their instructor's fidelity of JiTT implementation correlates with student views of their physics course. A blend of quantitative data (e.g., students grades, inventory scores, and questionnaire responses) are integrated with qualitative data (e.g., individual faculty interviews, student focus group discussions, and classroom observations). This study revealed no statistically significant relationship between instructors who spent time on a predefined JiTT critical component and their designation as a JiTT user or non-user. While JiTT users implemented the pedagogy in accordance with the creators' intended ideal vision, many also had trouble reconciling personal concerns about their role as a JiTT adopter and the anticipated demand of the innovation. I recommend that this population of faculty members can serve as a JiTT model for other courses, disciplines, and/or institutions. Student performance was not a predictor of student perception instructor fidelity of JiTT implementation. Additionally, the majority of students in this study reported they read their textbook prior to class and that JiTT assignments helped them prepare for in-class learning. I found evidence that exposure to the JiTT strategy may correlate with a more favorable student view of their physics course. Finally, according to students

  20. Exploring Just-in-Time Teaching 3D Development as a Tool for Enhancing Knowledge and Understanding

    Morag C.E. McFadyen

    2013-12-01

    Full Text Available The integumentary system (skin is the first line of defence in the body and part of the innate immune system. Within first year modules on Pharmaceutical Biology and Integrative Physiology in the Masters of Pharmacy degree at Robert Gordon University (RGU several software tools were used to support both lecture and coursework material for the immune and integumentary systems. However, students had difficulty visualizing the various layers of the skin and how they become affected by different skin lesions. As a response to these identified learning difficulties, a just-in-time teaching 3-Dimensional elearning object was developed using free-to-use 3D CAD packages alongside common elearning software. The outcome was a virtualised human arm equipped to illustrate and label primary or secondary skin lesions whilst allowing spatial manipulation of the arm. This allowed students to manipulate and identify the specific skin layers involved. Evaluation of student engagement and learning was favourable, with students reflecting that they had a better understanding of the topic. Initial findings from this study highlight the benefits of quick, low-cost 3D production processes as just-in-time teaching elearning tools that have a positive impact on students’ performance.

  1. Utilization of just-in-time training for nursing education using the LA Phonospirometry asthma tool.

    Pade, Kathryn H; Seik-Ismail, Sophia T; Chang, Todd P; Wang, Vincent J

    2017-08-28

    Just-in-time training (JITT) has been used to teach and re-teach known medical techniques, but has not been used to teach novel techniques. We aimed to assess the performance retention of JITT on a novel asthma exacerbation severity assessment technique known as Los Angeles (LA) Phonospirometry. This was a prospective cohort study using a convenience sample of pediatric emergency department registered nurses (RNs) who were asked to watch a brief instructional digital video on LA Phonospirometry, and then asked to practice the technique on a research assistant (RA). A checklist was used to evaluate proficiency with the primary outcome being the number correct on the checklist. The secondary outcome included whether or not they could identify a common error demonstrated by the RA. RNs were re-tested after 4-6 months to assess skill retention. Forty RNs were enrolled in the study and six were lost to follow-up. The mean time from the first to second testing was 5.4 months ± 0.5 months. The mean score of the first part of the checklist on the initial testing was 4.6 ± 0.7 and on second testing was 3.8 ± 1.5 (p = 0.008). This represented a drop in scores and thus minimal knowledge decay of 18% (from 91% to 73%). The mean values for number of errors picked up for the first test and second test were 1.3 and 1.5, respectively (p = 0.2). JITT demonstrated feasibility as a rapid instructional tool for RNs, with a limited decay in cognitive knowledge surrounding the LA Phonospirometry technique.

  2. Case Study Evaluating Just-In-Time Teaching and Peer Instruction Using Clickers in a Quantum Mechanics Course

    Sayer, Ryan; Marshman, Emily; Singh, Chandralekha

    2016-01-01

    Just-in-Time Teaching (JiTT) is an instructional strategy involving feedback from students on prelecture activities in order to design in-class activities to build on the continuing feedback from students. We investigate the effectiveness of a JiTT approach, which included in-class concept tests using clickers in an upper-division quantum…

  3. ConfChem Conference on Flipped Classroom: Just-in-Time Teaching in Chemistry Courses with Moodle

    Muzyka, Jennifer L.

    2015-01-01

    In the Just-in-Time Teaching approach, a faculty member assigns readings to students before every class. After the students have done the daily reading, they access a short reading quiz using a course management system (e.g., Moodle). The faculty member uses student responses to the quiz in the preparation of the day's class material and is able…

  4. Implementation and evaluation of a simulation curriculum for paediatric residency programs including just-in-time in situ mock codes.

    Sam, Jonathan; Pierse, Michael; Al-Qahtani, Abdullah; Cheng, Adam

    2012-02-01

    To develop, implement and evaluate a simulation-based acute care curriculum in a paediatric residency program using an integrated and longitudinal approach. Curriculum framework consisting of three modular, year-specific courses and longitudinal just-in-time, in situ mock codes. Paediatric residency program at BC Children's Hospital, Vancouver, British Columbia. The three year-specific courses focused on the critical first 5 min, complex medical management and crisis resource management, respectively. The just-in-time in situ mock codes simulated the acute deterioration of an existing ward patient, prepared the actual multidisciplinary code team, and primed the surrounding crisis support systems. Each curriculum component was evaluated with surveys using a five-point Likert scale. A total of 40 resident surveys were completed after each of the modular courses, and an additional 28 surveys were completed for the overall simulation curriculum. The highest Likert scores were for hands-on skill stations, immersive simulation environment and crisis resource management teaching. Survey results also suggested that just-in-time mock codes were realistic, reinforced learning, and prepared ward teams for patient deterioration. A simulation-based acute care curriculum was successfully integrated into a paediatric residency program. It provides a model for integrating simulation-based learning into other training programs, as well as a model for any hospital that wishes to improve paediatric resuscitation outcomes using just-in-time in situ mock codes.

  5. HOPE: A Python just-in-time compiler for astrophysical computations

    Akeret, J.; Gamper, L.; Amara, A.; Refregier, A.

    2015-04-01

    The Python programming language is becoming increasingly popular for scientific applications due to its simplicity, versatility, and the broad range of its libraries. A drawback of this dynamic language, however, is its low runtime performance which limits its applicability for large simulations and for the analysis of large data sets, as is common in astrophysics and cosmology. While various frameworks have been developed to address this limitation, most focus on covering the complete language set, and either force the user to alter the code or are not able to reach the full speed of an optimised native compiled language. In order to combine the ease of Python and the speed of C++, we developed HOPE, a specialised Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimisation on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. We assess the performance of HOPE by performing a series of benchmarks and compare its execution speed with that of plain Python, C++ and the other existing frameworks. We find that HOPE improves the performance compared to plain Python by a factor of 2 to 120, achieves speeds comparable to that of C++, and often exceeds the speed of the existing solutions. We discuss the differences between HOPE and the other frameworks, as well as future extensions of its capabilities. The fully documented HOPE package is available at http://hope.phys.ethz.ch and is published under the GPLv3 license on PyPI and GitHub.

  6. Using Just-in-Time Information to Support Scientific Discovery Learning in a Computer-Based Simulation

    Hulshof, Casper D.; de Jong, Ton

    2006-01-01

    Students encounter many obstacles during scientific discovery learning with computer-based simulations. It is hypothesized that an effective type of support, that does not interfere with the scientific discovery learning process, should be delivered on a "just-in-time" base. This study explores the effect of facilitating access to…

  7. Just-in-Time Feedback in Diet and Physical Activity Interventions: Systematic Review and Practical Design Framework.

    Schembre, Susan M; Liao, Yue; Robertson, Michael C; Dunton, Genevieve Fridlund; Kerr, Jacqueline; Haffey, Meghan E; Burnett, Taylor; Basen-Engquist, Karen; Hicklen, Rachel S

    2018-03-22

    The integration of body-worn sensors with mobile devices presents a tremendous opportunity to improve just-in-time behavioral interventions by enhancing bidirectional communication between investigators and their participants. This approach can be used to deliver supportive feedback at critical moments to optimize the attainment of health behavior goals. The goals of this systematic review were to summarize data on the content characteristics of feedback messaging used in diet and physical activity (PA) interventions and to develop a practical framework for designing just-in-time feedback for behavioral interventions. Interventions that included just-in-time feedback on PA, sedentary behavior, or dietary intake were eligible for inclusion. Feedback content and efficacy data were synthesized descriptively. The review included 31 studies (15/31, 48%, targeting PA or sedentary behavior only; 13/31, 42%, targeting diet and PA; and 3/31, 10%, targeting diet only). All studies used just-in-time feedback, 30 (97%, 30/31) used personalized feedback, and 24 (78%, 24/31) used goal-oriented feedback, but only 5 (16%, 5/31) used actionable feedback. Of the 9 studies that tested the efficacy of providing feedback to promote behavior change, 4 reported significant improvements in health behavior. In 3 of these 4 studies, feedback was continuously available, goal-oriented, or actionable. Feedback that was continuously available, personalized, and actionable relative to a known behavioral objective was prominent in intervention studies with significant behavior change outcomes. Future research should determine whether all or some of these characteristics are needed to optimize the effect of feedback in just-in-time interventions. ©Susan M Schembre, Yue Liao, Michael C Robertson, Genevieve Fridlund Dunton, Jacqueline Kerr, Meghan E Haffey, Taylor Burnett, Karen Basen-Engquist, Rachel S Hicklen. Originally published in the Journal of Medical Internet Research (http

  8. Application of just-in-time manufacturing techniques in radioactive source in well logging industry

    Atma Yudha Prawira

    2017-03-01

    Full Text Available Nuclear logging is one of major areas of logging development. This paper presents an empirical investigation to bring the drilling and completion of wells from an ill-defined art to a refined sci-ence by using radioactive source to “look and measure” such as formation type, formation dip, porosity, fluid type and numerous other important factors. The initial nuclear logging tools rec-ords the radiation emitted by formation as they were crossed by boreholes. Gamma radiation is used in well logging as it is powerful enough to penetrate the formation and steel casing. The ra-dioactive source is reusable so that after engineer finished the job the radioactive source is sent back to bunker. In this case inventory level of radioactive source is relatively high compared with monthly movement and the company must spend large amount of cost just for inventory. After calculating and averaging the monthly movement in 2014 and 2015, we detected a big pos-sibility to cut the inventory level to reduce the inventory cost.

  9. Just in time delivery as a product of logistics solution from a perspective of an ocean carrier / Ulrich Jasser = Система доставки товаров "Точно в срок" (Just in time) как продукт логистических

    Jasser, Ulrich

    2003-01-01

    Ettekanne 3.-4. detsembrini 2003 Tallinnas toimunud rahvusvahelisel konverents-näitusel "Logistics and transport in international trade" tutvustab ookeanivedudel kasutatavat logistikateenust "Just in time". Kaardid. Diagramm. Tabel

  10. On the role of the chaperonin CCT in the just-in-time assembly process of APC/CCdc20.

    Dekker, Carien

    2010-02-05

    The just-in-time hypothesis relates to the assembly of large multi-protein complexes and their regulation of activation in the cell. Here I postulate that chaperonins may contribute to the timely assembly and activation of such complexes. For the case of anaphase promoting complex/cyclosome(Cdc20) assembly by the eukaryotic chaperonin chaperonin containing Tcp1 it is shown that just-in-time synthesis and chaperone-assisted folding can synergise to generate a highly regulated assembly process of a protein complex that is vital for cell cycle progression. Once dependency has been established transcriptional regulation and chaperonin-dependency may have co-evolved to safeguard the timely activation of important multi-protein complexes. 2009 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

  11. Enhancing Student Engagement and Active Learning through Just-in-Time Teaching and the Use of Powerpoint

    Wanner, Thomas

    2015-01-01

    This instructional article is about an innovative teaching approach for enhancing student engagement and active learning in higher education through a combination of just-in-time teaching and the use of PowerPoint technology. The central component of this approach was students' pre-lecture preparation of a short PowerPoint presentation in which…

  12. The Effect of Inquiry Training Learning Model Based on Just in Time Teaching for Problem Solving Skill

    Turnip, Betty; Wahyuni, Ida; Tanjung, Yul Ifda

    2016-01-01

    One of the factors that can support successful learning activity is the use of learning models according to the objectives to be achieved. This study aimed to analyze the differences in problem-solving ability Physics student learning model Inquiry Training based on Just In Time Teaching [JITT] and conventional learning taught by cooperative model…

  13. Tech Select Decision Aide: A Mobile Application to Facilitate Just-in-Time Decision Support for Instructional Designers

    Dabbagh, Nada; Fake, Helen

    2017-01-01

    With the ubiquitous use of mobile technologies and the increasing demand for just-in-time training, there is a need to prepare and support instructional designers and educators to meet the pedagogical and technological development requirements of their target audience in the most effective and efficient way. This paper reviews the iterative…

  14. Nash and integrated solutions in a just-in-time seller-buyer supply chain with buyer's ordering cost reductions

    Lou, Kuo-Ren; Wang, Lu

    2016-05-01

    The seller frequently offers the buyer trade credit to settle the purchase amount. From the seller's prospective, granting trade credit increases not only the opportunity cost (i.e., the interest loss on the buyer's purchase amount during the credit period) but also the default risk (i.e., the rate that the buyer will be unable to pay off his/her debt obligations). On the other hand, granting trade credit increases sales volume and revenue. Consequently, trade credit is an important strategy to increase seller's profitability. In this paper, we assume that the seller uses trade credit and number of shipments in a production run as decision variables to maximise his/her profit, while the buyer determines his/her replenishment cycle time and capital investment as decision variables to reduce his/her ordering cost and achieve his/her maximum profit. We then derive non-cooperative Nash solution and cooperative integrated solution in a just-in-time inventory system, in which granting trade credit increases not only the demand but also the opportunity cost and default risk, and the relationship between the capital investment and the ordering cost reduction is logarithmic. Then, we use a software to solve and compare these two distinct solutions. Finally, we use sensitivity analysis to obtain some managerial insights.

  15. A framework for quality assessment of just-in-time requirements : The case of open source feature requests

    Heck, P.M.; Zaidman, A.E.

    2017-01-01

    Until now, quality assessment of requirements has focused on traditional up-front requirements. Contrasting these traditional requirements are just-in-time (JIT) requirements, which are by definition incomplete, not specific and might be ambiguous when initially specified, indicating a different

  16. PERBAIKAN KEBIJAKAN PENGENDALIAN PERSEDIAAN JUST IN TIME KOMPONEN PRODUK MAIN FLOOR SIDE LH PADA PT GAYA MOTOR

    Bella Suciana Istiqomah

    2015-06-01

    Full Text Available PT . Gaya Motor is a manufacturing company that is engaged in the assembly and production of automotive components incorporated in the group of PT Astra International.Perusahaan implement inventory control system Just In Time.Kanban’s supplier with safety stock of 0.5 days plus a safety stock of 0.5 extra days beyond the kanban. The study was conducted on the material supply products Main Floor Side LH SA - 001 , SA - 002 , SA - 003 , SA - 004 , SA - 005 , SA - 006 , SA - 007 , SA - 008 and SA - 009. Problems faced by the company are the high amount of inventory caused by inaccurate inventory systems and fault current in raw material procurement procedures. The purpose of this study was to evaluate the company's current inventory control system and propose improvements inventory control system that can minimize inventory costs compared to the cost of inventory at the company's current inventory system.Kanban inventory method supplier company currently has a total cost of inventory of Rp 318.861.462,00. Supplier kanban inventory control methods with safety stock kanban 0.1 days has a total cost of inventory of Rp 158.703.378,00. Inventory control methods Two - Bin Replenishment has a total inventory cost of Rp 98.497.214,00. From the results of these calculations, the minimum inventory cost obtained by using the method of inventory Two - Bin Replenishment, and made proposals related to changes in inventory control system.

  17. An Account for Implementing Just-in-time: A Case Study of the Automotive Industry in China

    Bo Hou

    2013-07-01

    Full Text Available Just-in-time (JIT has been a popular operation strategy partly because of its success in the japanese automobile industry. Various benefits such as inventory reduction, improved operations efficiency, and faster response, have been studied widely in previous studies. Therefore, successful implementation of JIT is vital to many companies. This research makes use of a case study to explore five key research themes, which are information system, production planning, inventory management, quality management, and suppliers management, and the success factors surrounding implementation of JIT for an automotive company. This case study also provides evidences for supporting the benefits of employing JIT. Semi-structured interviews were conducted to collect relevant data. The research finding indicates that JIT system is crucial for the success of automobile companies, and operates JIT system can lead to many advantages to the case company. The major contribution of this paper lies in the discussions of the successful factors as a practical guide to implement JIT systems.

  18. Automatic Generation of Just-in-Time Online Assessments from Software Design Models

    Zualkernan, Imran A.; El-Naaj, Salim Abou; Papadopoulos, Maria; Al-Amoudi, Budoor K.; Matthews, Charles E.

    2009-01-01

    Computer software is pervasive in today's society. The rate at which new versions of computer software products are released is phenomenal when compared to the release rate of new products in traditional industries such as aircraft building. This rapid rate of change can partially explain why most certifications in the software industry are…

  19. Speed of engagement with support generated by a smoking cessation smartphone Just In Time Adaptive Intervention (JITAI

    Felix Naughton

    2015-10-01

    Full Text Available Background: An advantage of the high portability and sensing capabilities of smartphones is the potential for health apps to deliver advice and support to individuals close in time to when it is deemed of greatest relevance and impact, often referred to as Just In Time Adaptive Interventions (JITAI. However, little research has been undertaken to explore the viability of JITAI in terms of how long it takes users to engage with support triggered by real time data input, compared to scheduled support, and whether context affects response. This paper is focused on Q Sense, a smoking cessation app developed to deliver both Just in Time and scheduled support messages (every morning during a smoker’s quit attempt. The Just in Time cessation support generated by Q Sense is triggered by and tailored to real time context using location sensing. Objectives: To assess: 1 the time to engage with the app after a Just in Time support notification is delivered and whether this is influenced by the context in which the notification was initially delivered, 2 whether the time to engage with the app differs between Just in Time support notifications and scheduled support message notifications and 3 whether findings from objectives 1 and 2 differ between smokers receiving or not receiving NHS smoking cessation support. Methods: Data are from two studies evaluating the use of Q Sense: a feasibility study using an opportunity sample of smokers initiating a quit attempt with Q Sense without NHS cessation support (N=15 and an ongoing acceptability study of smokers receiving NHS smoking cessation support alongside app use (target N=40, recruitment due to be completed end of November 2015. Time elapse between notification generation and the user opening the app will be calculated and compared between message types (Just in Time vs. scheduled messages, contexts (home, work, socialising, other and samples (receiving or not receiving NHS cessation support using t

  20. Combining Fungicides and Prospective NPR1-Based "Just-in-Time" Immunomodulating Chemistries for Crop Protection.

    Kuai, Xiahezi; Barraco, Charles; Després, Charles

    2017-01-01

    Each year, crop yield is lost to weeds competing for resources, insect herbivory and diseases caused by pathogens. To thwart these insults and preserve yield security and a high quality of traits, conventional agriculture makes use of improved cultivars combined with fertilizer and agrochemical applications. However, given that regulatory bodies and consumers are demanding environmentally safer agrochemicals, while at the same time resistance to agrochemicals is mounting, it is crucial to adopt a "holistic" approach to agriculture by not excluding any number of management tools at our disposal. One such tool includes chemicals that stimulate plant immunity. The development of this particular type of alternative crop protection strategy has been of great interest to us. We have approached this paradigm by studying plant immunity, specifically systemic acquired resistance (SAR). The deployment of SAR immunity requires the production by the crop plant of an endogenous small molecule metabolite called salicylic acid (SA). Furthermore, immunity can only be deployed if SA can bind to its receptor and activate the genes responsible for the SAR program. The key receptor for SAR is a transcription coactivator called NPR1. Since discovering this NPR1-SA receptor-ligand pair, we have embarked on a journey to develop novel chemistries capable of deploying SAR in the field. The journey begins with the development of a scalable assay to identify these novel chemistries. One such assay, presented here, is based on differential scanning fluorimetry technology and demonstrates that NPR1 is destabilized by binding to SA.

  1. Performance model for “Just-in-Time” problems in real-time multimedia applications

    R.D. van der Mei (Rob); F.J. Seinstra; G.M. Koole (Ger); R. Yang (Ran); D. Roubos; H. Bal

    2008-01-01

    htmlabstractOver the last few years, the use of large-scale multimedia data applications has been growing tremendously, and this growth is not likely to slow down in the near future. Many multimedia applications operate in a real-time environment (e.g., surveillance cameras, iris scans), which

  2. Aplikace logistických technologií Just-in-Time a Just-in-Sequence ve společnosti Robert Bosch spol. s r.o.

    ŠTEFKOVÁ, Iveta

    2009-01-01

    This work is mostly oriented to define theory and application of principle Just in Time ( JIT ), Just in Sequence (JIS ) and related methods in Robert Bosch Ltd.Part goals are define theoretical basis of JIT and JIS from knowledge of Czech and foreign literature and detailed analysis of particular methods. Each method is well evaluated with all its pros and cons. Further observations engaged method of Kanban, Heijunka, MRPI, MRPII, which are close related to JIT and JIS. This work precisely d...

  3. ?Just-in-Time? Battery Charge Depletion Control for PHEVs and E-REVs for Maximum Battery Life

    DeVault, Robert C [ORNL

    2009-01-01

    Conventional methods of vehicle operation for Plug-in Hybrid Vehicles first discharge the battery to a minimum State of Charge (SOC) before switching to charge sustaining operation. This is very demanding on the battery, maximizing the number of trips ending with a depleted battery and maximizing the distance driven on a depleted battery over the vehicle s life. Several methods have been proposed to reduce the number of trips ending with a deeply discharged battery and also eliminate the need for extended driving on a depleted battery. An optimum SOC can be maintained for long battery life before discharging the battery so that the vehicle reaches an electric plug-in destination just as the battery reaches the minimum operating SOC. These Just-in-Time methods provide maximum effective battery life while getting virtually the same electricity from the grid.

  4. Just-in-time preemptive single machine problem with costs of earliness/tardiness, interruption and work-in-process

    Mohammad Kazemi

    2012-04-01

    Full Text Available This paper considers preemption and idle time are allowed in a single machine scheduling problem with just-in-time (JIT approach. It incorporates Earliness/Tardiness (E/T penalties, interruption penalties and holding cost of jobs which are waiting to be processed as work-in-process (WIP. Generally in non-preemptive problems, E/T penalties are a function of the completion time of the jobs. Then, we introduce a non-linear preemptive scheduling model where the earliness penalty depends on the starting time of a job. The model is liberalized by an elaborately–designed procedure to reach the optimum solution. To validate and verify the performance of proposed model, computational results are presented by solving a number of numerical examples.

  5. Just in Time Strategy and Financial Performance of Small Scale Industry in Ogun State: A Study of ADO-ODO/OTA Local Government

    Patrick Amaechi Egbunike

    2017-10-01

    Full Text Available Many manufacturing firms have decided to implement just in time technique as a strategic cost management to survive and remain competitive in their business environment. The study examines how just in time technique has assisted in reducing inventory cost management and improve the firm profit level. The specific objective is to ascertain the influence of purchases and sales on return on equity of small scale manufacturing industry. Survey design was used for the study. Sample frame was purposively selected for convenience sake. Data was collected though secondary source. Regression analysis was employed to analyze the data. The study found positive relationship between just in time implementation and profit level of small scale business industry. We recommend other small scale businesses that have not started implementing just in time strategy to start the strategy. We encourage future researcher to examine the efficiency of just in time strategy among petty small scale trader in our urban centers.

  6. The Just-in-Time Operating Philosophy: Implications for Workers and Work Teams

    1990-01-01

    anyone at all conversant with business who has not heard or read about the startling improvements in productivity and quality of worklife to be gained by...need to yield to the new philosophy. The transition to JIT can also impact the balance of power and control between management and labor. Without buffer...internal substitutability weaken the power of the worker [31]. These factors intervene to create a delicate balance of power between management and the

  7. LO + EPSS = Just-in-Time Reuse of Content to Support Employee Performance

    Nguyen, Frank; Hanzel, Matthew

    2007-01-01

    Those involved in training know that creating instructional materials can become a tedious, repetitive process. They also know that business conditions often require training interventions to be delivered in ways that are not ideally structured or timed. This article examines the notion that learning objects can be reused and adapted for…

  8. Using just-in-time teaching and peer instruction in a residency program's core curriculum: enhancing satisfaction, engagement, and retention.

    Schuller, Mary C; DaRosa, Debra A; Crandall, Marie L

    2015-03-01

    To assess use of the combined just-in-time teaching (JiTT) and peer instruction (PI) instructional strategy in a residency program's core curriculum. In 2010-2011, JiTT/PI was piloted in 31 core curriculum sessions taught by 22 faculty in the Northwestern University Feinberg School of Medicine's general surgery residency program. JiTT/PI required preliminary and categorical residents (n=31) to complete Web-based study questions before weekly specialty topic sessions. Responses were examined by faculty members "just in time" to tailor session content to residents' learning needs. In the sessions, residents answered multiple-choice questions (MCQs) using clickers and engaged in PI. Participants completed surveys assessing their perceptions of JiTT/PI. Videos were coded to assess resident engagement time in JiTT/PI sessions versus prior lecture-based sessions. Responses to topic session MCQs repeated in review sessions were evaluated to study retention. More than 70% of resident survey respondents indicated that JiTT/PI aided in the learning of key points. At least 90% of faculty survey respondents reported positive perceptions of aspects of the JiTT/PI strategy. Resident engagement time for JiTT/PI sessions was significantly greater than for prior lecture-based sessions (z=-2.4, P=.016). Significantly more review session MCQ responses were correct for residents who had attended corresponding JiTT/PI sessions than for residents who had not (chi-square=13.7; df=1; P<.001). JiTT/PI increased learner participation, learner retention, and the amount of learner-centered time. JiTT/PI represents an effective approach for meaningful and active learning in core curriculum sessions.

  9. Preparing emergency personnel in dialysis: a just-in-time training program for additional staffing during disasters.

    Stoler, Genevieve B; Johnston, James R; Stevenson, Judy A; Suyama, Joe

    2013-06-01

    There are 341 000 patients in the United States who are dependent on routine dialysis for survival. Recent large-scale disasters have emphasized the importance of disaster preparedness, including supporting dialysis units, for people with chronic disease. Contingency plans for staffing are important for providing continuity of care for a technically challenging procedure such as dialysis. PReparing Emergency Personnel in Dialysis (PREP-D) is a just-in-time training program designed to train individuals having minimum familiarity with the basic steps of dialysis to support routine dialysis staff during a disaster. A 5-module educational program was developed through a collaborative, multidisciplinary effort. A pilot study testing the program was performed using 20 nontechnician dialysis facility employees and 20 clinical-year medical students as subjects. When comparing pretest and posttest scores, the entire study population showed a mean improvement of 28.9%, with dialysis facility employees and medical students showing improvements of 21.8% and 36.4%, respectively (P just-in-time training format. The knowledge gained by using the PREP-D program during a staffing shortage may allow for continuity of care for critical services such as dialysis during a disaster.

  10. Modeling Just-in-Time Communication On the Optimal Resource Utilization in Distributed Real-Time Multimedia Applications

    R. Yang (Ran); R.D. van der Mei (Rob); D. Roubos; F.J. Seinstra; H. Bal

    2012-01-01

    htmlabstractThe applications of multimedia content analysis (MMCA) operating in real-time environments must run under extremely strict time constraints. To meet these requirements, large-scale multimedia applications are typically executed on Grid systems consisting of large collections of

  11. Modeling Just-in-Time Communication On the Optimal Resource Utilization in Distributed Real-Time Multimedia Applications

    R. Yang (Ran); R.D. van der Mei (Rob); D. Roubos; F.J. Seinstra; H. Bal

    2011-01-01

    htmlabstractThe applications of multimedia content analysis (MMCA) operating in real-time environments must run under extremely strict time constraints. To meet these requirements, large-scale multimedia applications are typically executed on Grid systems consisting of large collections of

  12. Building health behavior models to guide the development of just-in-time adaptive interventions: A pragmatic framework.

    Nahum-Shani, Inbal; Hekler, Eric B; Spruijt-Metz, Donna

    2015-12-01

    Advances in wireless devices and mobile technology offer many opportunities for delivering just-in-time adaptive interventions (JITAIs)-suites of interventions that adapt over time to an individual's changing status and circumstances with the goal to address the individual's need for support, whenever this need arises. A major challenge confronting behavioral scientists aiming to develop a JITAI concerns the selection and integration of existing empirical, theoretical and practical evidence into a scientific model that can inform the construction of a JITAI and help identify scientific gaps. The purpose of this paper is to establish a pragmatic framework that can be used to organize existing evidence into a useful model for JITAI construction. This framework involves clarifying the conceptual purpose of a JITAI, namely, the provision of just-in-time support via adaptation, as well as describing the components of a JITAI and articulating a list of concrete questions to guide the establishment of a useful model for JITAI construction. The proposed framework includes an organizing scheme for translating the relatively static scientific models underlying many health behavior interventions into a more dynamic model that better incorporates the element of time. This framework will help to guide the next generation of empirical work to support the creation of effective JITAIs. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

  13. On the Feasibility and Limitations of Just-in-Time Instruction Set Extension for FPGA-Based Reconfigurable Processors

    Mariusz Grad

    2012-01-01

    Full Text Available Reconfigurable instruction set processors provide the possibility of tailor the instruction set of a CPU to a particular application. While this customization process could be performed during runtime in order to adapt the CPU to the currently executed workload, this use case has been hardly investigated. In this paper, we study the feasibility of moving the customization process to runtime and evaluate the relation of the expected speedups and the associated overheads. To this end, we present a tool flow that is tailored to the requirements of this just-in-time ASIP specialization scenario. We evaluate our methods by targeting our previously introduced Woolcano reconfigurable ASIP architecture for a set of applications from the SPEC2006, SPEC2000, MiBench, and SciMark2 benchmark suites. Our results show that just-in-time ASIP specialization is promising for embedded computing applications, where average speedups of 5x can be achieved by spending 50 minutes for custom instruction identification and hardware generation. These overheads will be compensated if the applications execute for more than 2 hours. For the scientific computing benchmarks, the achievable speedup is only 1.2x, which requires significant execution times in the order of days to amortize the overheads.

  14. Just-in-Time Training for High-Risk Low-Volume Therapies: An Approach to Ensure Patient Safety.

    Helman, Stephanie; Lisanti, Amy Jo; Adams, Ann; Field, Cynthia; Davis, Katherine Finn

    2016-01-01

    High-risk low-volume therapies are those therapies that are practiced infrequently and yet carry an increased risk to patients because of their complexity. Staff nurses are required to competently manage these therapies to treat patients' unique needs and optimize outcomes; however, maintaining competence is challenging. This article describes implementation of Just-in-Time Training, which requires validation of minimum competency of bedside nurses managing high-risk low-volume therapies through direct observation of a return-demonstration competency checklist.

  15. Forecast Method of Solar Irradiance with Just-In-Time Modeling

    Suzuki, Takanobu; Goto, Yusuke; Terazono, Takahiro; Wakao, Shinji; Oozeki, Takashi

    PV power output mainly depends on the solar irradiance which is affected by various meteorological factors. So, it is required to predict solar irradiance in the future for the efficient operation of PV systems. In this paper, we develop a novel approach for solar irradiance forecast, in which we introduce to combine the black-box model (JIT Modeling) with the physical model (GPV data). We investigate the predictive accuracy of solar irradiance over wide controlled-area of each electric power company by utilizing the measured data on the 44 observation points throughout Japan offered by JMA and the 64 points around Kanto by NEDO. Finally, we propose the application forecast method of solar irradiance to the point which is difficulty in compiling the database. And we consider the influence of different GPV default time on solar irradiance prediction.

  16. New LWD tools are just in time to probe for baby elephants

    Ghiselin, D.

    1997-04-01

    Development of sophisticated formation evaluation instrumentation for use while drilling has led to a stratification of while-drilling services. Measurements while drilling (MWD) comprises measurements of mechanical parameters like weight-on-bit, mud pressures, torque, vibration, hole angle and direction. Logging while drilling (LWD) describes resistivity, sonic, and radiation logging which rival wireline measurements in accuracy. A critical feature of LWD is the rate that data can be telemetered to the surface. Early tools could only transmit 3 bits per second one way. In the last decade, the data rate has more than tripled. Despite these improvements, LWD tools have the ability to make many more measurements than can be telemetered in real-time. The paper discusses the development of this technology and its applications.

  17. Just-in-Time Teaching: A Tool for Enhancing Student Engagement in Advanced Foreign Language Learning

    Abreu, Laurel; Knouse, Stephanie

    2014-01-01

    Scholars have indicated a need for further research on effective pedagogical strategies designed for advanced foreign language courses in the postsecondary setting, especially in light of decreased enrollments at this level and the elimination of foreign language programs altogether in some institutions (Paesani & Allen, 2012). This article…

  18. China's Coming of Age on Climate Change. Just in time for Paris?

    Faure-Schuyer, Aurelie; Seaman, John

    2015-05-01

    The upcoming Paris climate conference (COP21) is opening the door to a new post-2020 climate regime in which China and other large emitters will have to provide strong evidence of their domestic efforts in addressing global warming in the next century. China's domestic climate policy remains consistent in favoring robust action to reduce the country's projected emissions trajectory and its impact on climate change. An increased emphasis on environmental protection at the political level, the identification of clean energy technologies as new strategic industries for China and a push to restructure the country's economy towards less energy-intensive sectors, provide an outlook scenario for a peak in CO 2 emissions by 2030. This was ultimately the target offered by China in its landmark climate agreement with the US in November 2014, which also saw China agreeing to achieve 20% of its energy production from non-fossil fuel sources by 2030. Nevertheless, there are doubts regarding China's willingness to make commitments beyond what it has already announced in the November agreement and the role it will ultimately play in Paris this December. On the one hand, its remaining domestic challenges provide a hefty degree of uncertainty about whether it can achieve the commitments it has already made. A strong political will to combat pollution, for example, does not always translate into decreased emissions at the national level. Moreover, it remains uncertain whether China's vast anti-corruption campaign will ultimately facilitate strong reforms by reinforcing the central government's power, stall the country's bureaucratic machine and thus weaken momentum for reforms, or perhaps even lead to a longer-term political instability. Each of these scenarios will have a different affect on the country's ability to implement climate policy. China's position is also complicated by a unique international stance between an increasingly

  19. Explaining plant-soil diversity in Alpine ecosystems: more than just time since ecosystem succession started

    Lane, Stuart; Baetz, Nico; Borgeaud, Laure; Verrecchia, Eric; Vittoz, Pascal

    2014-05-01

    Ecosystem succession in Alpine environments has been a focus of research for many decades. Following from the classic ideas of Jenny (1941, 1961), following perturbation, an ecosystem (flora, fauna and soil) should evolve as a function of time at a rate conditioned by external variables (relief, climate, geology). More recently, biogeomorphologists have focused upon the notion of co-evolution of geomorphic processes with ecosystems over very short through to very long (evolutionary) time-scales. Alpine environments have been a particular focus of models of co-evolution, as a means of understanding the rate of plant colonization of previously glaciated terrain. However, work in this field has tended to adopt an over simplified view of the relationship between perturbation and succession, including: how the landform and ecosystem itself conditions the impact of a perturbation to create a complex spatial impact; and how perturbations are not simply ecosystem destroyers but can be a significant source of ecosystem resources. What this means is that at the within landform scale, there may well be a complex and dynamic topographic and sedimentological template that co-evolves with the development of soil, flora and fauna. In this paper, we present and test conceptual models for such co-evolution for an Alpine alluvial fan and an Alpine piedmont braided river. We combine detailed floristic inventory with soil inventory, survey of edaphic variables above and below ground (e.g. vertical and lateral sedimentological structure, using electrical resistance tomography) and the analysis of historical aerial imagery. The floristic inventory shows the existence of a suite of distinct plant communities within each landform. Time since last perturbation is not a useful explanatory variable of the spatial distribution of these communities because: (1) perturbation impacts are spatially variable, as conditioned by the extent distribution of topographic, edaphic and ecological

  20. The Combination of Just-in-Time Teaching and Wikispaces in Physics Classrooms

    Mohottala, Hashini E.

    2013-01-01

    The general student population enrolled in today's physics classrooms is diverse. They come from a variety of different educational backgrounds. Some demonstrate a good knowledge of natural laws of physics with a better understanding of mathematical concepts, while others show a fair knowledge in fundamentals of physics with a minimum knowledge in…

  1. Just-in-time tomography (JiTT): a new concept for image-guided radiation therapy

    Pang, G; Rowlands, J A [Toronto-Sunnybrook Regional Cancer Centre, 2075 Bayview Avenue, Toronto M4N 3M5 (Canada); Imaging Research, Sunnybrook and Women' s College Health Sciences Centre, Departments of Radiation Oncology and Medical Biophysics, University of Toronto, Toronto (Canada)

    2005-11-07

    Soft-tissue target motion is one of the main concerns in high-precision radiation therapy. Cone beam computed tomography (CBCT) has been developed recently to image soft-tissue targets in the treatment room and guide the radiation therapy treatment. However, due to its relatively long image acquisition time the CBCT approach cannot provide images of the target at the instant of the treatment and thus it is not adequate for imaging targets with intrafraction motion. In this note, a new approach for image-guided radiation therapy-just-in-time tomography (JiTT)-is proposed. Differing from CBCT, JiTT takes much less time to generate the needed tomographical, beam's-eye-view images of the treatment target at the right moment to guide the radiation therapy treatment. (note)

  2. Just-in-time tomography (JiTT): a new concept for image-guided radiation therapy

    Pang, G; Rowlands, J A

    2005-01-01

    Soft-tissue target motion is one of the main concerns in high-precision radiation therapy. Cone beam computed tomography (CBCT) has been developed recently to image soft-tissue targets in the treatment room and guide the radiation therapy treatment. However, due to its relatively long image acquisition time the CBCT approach cannot provide images of the target at the instant of the treatment and thus it is not adequate for imaging targets with intrafraction motion. In this note, a new approach for image-guided radiation therapy-just-in-time tomography (JiTT)-is proposed. Differing from CBCT, JiTT takes much less time to generate the needed tomographical, beam's-eye-view images of the treatment target at the right moment to guide the radiation therapy treatment. (note)

  3. Uncertainty in Damage Detection, Dynamic Propagation and Just-in-Time Networks

    2015-08-03

    EEG) problem, of finding optimal number and locations for sensors for source identification in a 3D unit sphere from data on its boundary. In this...Poag, E. Thorpe, K.B. Flores and H.T. Banks, Uncertainty quantification for a model of HIV -1 patient response to antiretroviral therapy interruptions...Raleigh, NC, November, 2013; J. Inverse and Ill-posed Problems, 23 (2014), 135–-171, ISSN (Online) 1569-3945, ISSN ( Print ) 0928-0219, DOI

  4. Just in time: technology to disseminate curriculum and manage educational requirements with mobile technology.

    Ferenchick, Gary; Fetters, Moses; Carse, A Mervyn

    2008-01-01

    Learning objectives intended to guide clinical education may be of limited usefulness if they are unavailable to students when interacting with patients. We developed, implemented, and evaluated a Web-based process to disseminate the Clerkship Directors of Internal Medicine curricular objectives to students via handheld computers and for students to upload patient logs to a central database. We delivered this program to all students in our geographically dispersed system, with minimal technological problems. The total number of "hits" on curricular objectives was 8,932 (averaging 149 per student or approximately 2.7 times daily). The average number of "hits" per problem was 470, ranging from 18 for smoking cessation to 1,784 for chest pain. The total number of patient problems logged by students was 9,579, and 91% of students met our prespecified criteria for numbers and types of patients. Dissemination and use of curricular learning objectives and related tools is enhanced with mobile technology.

  5. Early Detection of Plant Equipment Failures: A Case Study in Just-in-Time Maintenance

    Parlos, Alexander G.; Kim, Kyusung; Bharadwaj, Raj M.

    2001-01-01

    The development and testing of a model-based fault detection system for electric motors is briefly presented. The fault detection system was developed using only motor nameplate information. The fault detection results presented utilize only motor voltage and current sensor information, minimizing the need for expensive or intrusive sensors. Dynamic recurrent neural networks are used to predict the input-output response of a three-phase induction motor while using an estimate of the motor speed signal. Multiresolution (or wavelet) signal-processing techniques are used in combination with more traditional methods to estimate fault features for use in winding insulation and motor mechanical and electromechanical failure detection

  6. Early Detection of Plant Equipment Failures: A Case Study in Just-in-Time Maintenance

    Parlos, Alexander G.; Kim, Kyusung; Bharadwaj, Raj M.

    2001-06-17

    The development and testing of a model-based fault detection system for electric motors is briefly presented. The fault detection system was developed using only motor nameplate information. The fault detection results presented utilize only motor voltage and current sensor information, minimizing the need for expensive or intrusive sensors. Dynamic recurrent neural networks are used to predict the input-output response of a three-phase induction motor while using an estimate of the motor speed signal. Multiresolution (or wavelet) signal-processing techniques are used in combination with more traditional methods to estimate fault features for use in winding insulation and motor mechanical and electromechanical failure detection.

  7. Innovation in the Teaching-learning Processes: A Case Study Using Just-in-Time Teaching and Peer Instruction

    Ana Carolina Maldonado-Fuentes

    2016-05-01

    Full Text Available Learning quality constitutes one of the main challenges faced by Higher Education, thus a student centered teaching and the development of educational innovations that use active methodologies have been promoted. This article aims to evaluate the impact of using Just-in-Time Teaching and Peer Instruction on the results of teaching a subject, of disciplinary character, in 17 students of a career on an initial teacher training belonging to Chile’s Council of Rectors. A pre and postest model was applied between August and December 2012. The analysis used descriptive techniques that allowed the characterization of the admission profile and inferentials to explain, statistically, the observed differences in the performance of the subjects. In terms of perception, a positive assessment of the relationship between students and the teacher in the classroom was observed, this stood out above the improvement in the handling of disciplinary content.

  8. Assessing the Availability of Users to Engage in Just-in-Time Intervention in the Natural Environment.

    Sarker, Hillol; Sharmin, Moushumi; Ali, Amin Ahsan; Rahman, Md Mahbubur; Bari, Rummana; Hossain, Syed Monowar; Kumar, Santosh

    Wearable wireless sensors for health monitoring are enabling the design and delivery of just-in-time interventions (JITI). Critical to the success of JITI is to time its delivery so that the user is available to be engaged. We take a first step in modeling users' availability by analyzing 2,064 hours of physiological sensor data and 2,717 self-reports collected from 30 participants in a week-long field study. We use delay in responding to a prompt to objectively measure availability. We compute 99 features and identify 30 as most discriminating to train a machine learning model for predicting availability. We find that location, affect, activity type, stress, time, and day of the week, play significant roles in predicting availability. We find that users are least available at work and during driving, and most available when walking outside. Our model finally achieves an accuracy of 74.7% in 10-fold cross-validation and 77.9% with leave-one-subject-out.

  9. An effective implementation scheme of just-in-time protocol for optical burst switching networks

    Wu, Guiling; Li, Xinwan; Chen, Jian-Ping; Wang, Hui

    2005-02-01

    Optical burst switching (OBS) has been emerging as a promising technology that can effectively support the next generation IP-oriented transportation networks. JIT signaling protocol for OBS is relatively simple and easy to be implemented by hardware. This paper presented an effective scheme to implement the JIT protocol, which not only can effectively implement reservation and release of optical channels based on JIT, but also can process the failure of channel reservation and release due to loss of burst control packets. The scheme includes: (1) a BHP (burst head packet) path table is designed and built at each OBS node. It is used to guarantee the corresponding burst control packet, i.e. BHP, BEP (burst end packet) and BEP_ACK (BEP acknowledgement), to be transmitted in the same path. (2) The timed retransmission of BEP and the reversed deletion of the item in BHP path tables triggered by the corresponding BEP_ACK are combined to solve the problems caused by the loss of the signaling messages in channel reservation and release process. (3) Burst head packets and BEP_ACK are transmitted using "best-effort" method. Related signaling messages and their formats for the proposed scheme are also given.

  10. Just-in-time learning is effective in helping first responders manage weapons of mass destruction events.

    Motola, Ivette; Burns, William A; Brotons, Angel A; Withum, Kelly F; Rodriguez, Richard D; Hernandez, Salma; Rivera, Hector F; Issenberg, Saul Barry; Schulman, Carl I

    2015-10-01

    Chemical, biologic, radiologic, nuclear, and explosive (CBRNE) incidents require specialized training. The low frequency of these events leads to significant skill decay among first responders. To address skill decay and lack of experience with these high-impact events, educational modules were developed for mobile devices to provide just-in-time training to first responders en route to a CBRNE event. This study assessed the efficacy and usability of the mobile training. Ninety first responders were randomized to a control or an intervention group. All participants completed a pretest to measure knowledge of CBRNE topics. The intervention group then viewed personal protective equipment and weapons of mass destruction field management videos as an overview. Both groups were briefed on a disaster scenario (chemical nerve agent, radiologic, or explosives) requiring them to triage, assess, and manage a patient. Intervention group participants watched a mobile training video corresponding to the scenario. The control group did not receive prescenario video training. Observers rated participant performance in each scenario. After completing the scenarios, all participants answered a cognitive posttest. Those in the intervention group also answered a questionnaire on their impressions of the training. The intervention group outperformed the control group in the explosives and chemical nerve agent scenarios; the differences were statistically significant (explosives, mean of 26.32 for intervention and 22.85 for control, p just-in-time training improved first-responder knowledge of CBRNE events and is an effective tool in helping first responders manage simulated explosive and chemical agent scenarios. Therapeutic/care management study, level II.

  11. Keeping Just-in-Time from Being Way-Too-Late or Way-Too-Little.

    Hughes, Michael

    2003-01-01

    Describes a systematic approach for the design of training that supports large software implementation projects. Addresses the diverse combination of users, with different needs and time requirements, and outlines how a systematic design approach can be applied to the design and delivery of complex training solutions related to performance…

  12. Effect of just-in-time simulation training on tracheal intubation procedure safety in the pediatric intensive care unit.

    Nishisaki, Akira; Donoghue, Aaron J; Colborn, Shawn; Watson, Christine; Meyer, Andrew; Brown, Calvin A; Helfaer, Mark A; Walls, Ron M; Nadkarni, Vinay M

    2010-07-01

    Tracheal intubation-associated events (TIAEs) are common (20%) and life threatening (4%) in pediatric intensive care units. Physician trainees are required to learn tracheal intubation during intensive care unit rotations. The authors hypothesized that "just-in-time" simulation-based intubation refresher training would improve resident participation, success, and decrease TIAEs. For 14 months, one of two on-call residents, nurses, and respiratory therapists received 20-min multidisciplinary simulation-based tracheal intubation training and 10-min resident skill refresher training at the beginning of their on-call period in addition to routine residency education. The rate of first attempt and overall success between refresher-trained and concurrent non-refresher-trained residents (controls) during the intervention phase was compared. The incidence of TIAEs between preintervention and intervention phase was also compared. Four hundred one consecutive primary orotracheal intubations were evaluated: 220 preintervention and 181 intervention. During intervention phase, neither first-attempt success nor overall success rate differed between refresher-trained residents versus concurrent non-refresher-trained residents: 20 of 40 (50%) versus 15 of 24 (62.5%), P = 0.44 and 23 of 40 (57.5%) versus 18 of 24 (75.0%), P = 0.19, respectively. The resident's first attempt and overall success rate did not differ between preintervention and intervention phases. The incidence of TIAE during preintervention and intervention phases was similar: 22.0% preintervention versus 19.9% intervention, P = 0.62, whereas resident participation increased from 20.9% preintervention to 35.4% intervention, P = 0.002. Resident participation continued to be associated with TIAE even after adjusting for the phase and difficult airway condition: odds ratio 2.22 (95% CI 1.28-3.87, P = 0.005). Brief just-in-time multidisciplinary simulation-based intubation refresher training did not improve the resident

  13. Stop the hunting: using a wound care-specific EMR for 'just-in-time" supply ordering.

    Turner, Toni; Walker, David

    2007-01-01

    Ensuring adequate stocks of wound care supplies at wound care to be tied up, and too little can cause problems for patients. Most facilities maintain a "par" level for each item, which requires that supplies be ordered even if the "par" is numerically short by one item. In addition, due to the current just-in-time environment, if attention is not paid to the par level, unexpected shortages of supplies can develop. By using Inventory Trak software developed by Intellicure, facility managers will always know how much stock is presentfor each item, as individual item barcodes are registered in the system each time an item is used through software-linking scanners. The result is increased efficiency, reduced cost to the facility, and an assurance that the facility will not run out of critical items.

  14. Just in Time Strategy and Financial Performance of Small Scale Industry in Ogun State: A Study of ADO-ODO/OTA Local Government

    Patrick Amaechi Egbunike; Osazee Graham Imade

    2017-01-01

    Many manufacturing firms have decided to implement just in time technique as a strategic cost management to survive and remain competitive in their business environment. The study examines how just in time technique has assisted in reducing inventory cost management and improve the firm profit level. The specific objective is to ascertain the influence of purchases and sales on return on equity of small scale manufacturing industry. Survey design was used for the study. Sample frame was purpo...

  15. Just-in-time vaccines: Biomineralized calcium phosphate core-immunogen shell nanoparticles induce long-lasting CD8(+) T cell responses in mice.

    Zhou, Weibin; Moguche, Albanus O; Chiu, David; Murali-Krishna, Kaja; Baneyx, François

    2014-04-01

    Distributed and on-demand vaccine production could be game-changing for infectious disease treatment in the developing world by providing new therapeutic opportunities and breaking the refrigeration "cold chain". Here, we show that a fusion protein between a calcium phosphate binding domain and the model antigen ovalbumin can mineralize a biocompatible adjuvant in a single step. The resulting 50 nm calcium phosphate core-immunogen shell particles are comparable to soluble protein in inducing ovalbumin-specific antibody response and class switch recombination in mice. However, single dose vaccination with nanoparticles leads to higher expansion of ovalbumin-specific CD8(+) T cells upon challenge with an influenza virus bearing the ovalbumin-derived SIINFEKL peptide, and these cells produce high levels of IFN-γ. Furthermore, mice exhibit a robust antigen-specific CD8(+) T cell recall response when challenged with virus 8 months post-immunization. These results underscore the promise of immunogen-controlled adjuvant mineralization for just-in-time manufacturing of effective T cell vaccines. This paper reports that a fusion protein between a calcium phosphate binding domain and the model antigen ovalbumin can mineralize into a biocompatible adjuvant in a single step, enabling distributed and on-demand vaccine production and eliminating the need for refrigeration of vaccines. The findings highlight the possibility of immunogen-controlled adjuvant mineralization for just-in-time manufacturing of effective T cell vaccines. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. Just in Time and Future-Proofing? Policy, Challenges and Opportunities in the Professional Development of Part-Time Teachers

    Beaton, Fran

    2017-01-01

    Part-time teachers form a growing proportion of the global Higher Education (HE) workforce. Their backgrounds can vary from Graduate Teaching Assistants (GTAs) teaching for the first time, to practitioners bringing workplace experience into HE and sessional teachers, all with differing professional development needs. This paper builds on previous…

  17. Fault Detection for Nonlinear Process With Deterministic Disturbances: A Just-In-Time Learning Based Data Driven Method.

    Yin, Shen; Gao, Huijun; Qiu, Jianbin; Kaynak, Okyay

    2017-11-01

    Data-driven fault detection plays an important role in industrial systems due to its applicability in case of unknown physical models. In fault detection, disturbances must be taken into account as an inherent characteristic of processes. Nevertheless, fault detection for nonlinear processes with deterministic disturbances still receive little attention, especially in data-driven field. To solve this problem, a just-in-time learning-based data-driven (JITL-DD) fault detection method for nonlinear processes with deterministic disturbances is proposed in this paper. JITL-DD employs JITL scheme for process description with local model structures to cope with processes dynamics and nonlinearity. The proposed method provides a data-driven fault detection solution for nonlinear processes with deterministic disturbances, and owns inherent online adaptation and high accuracy of fault detection. Two nonlinear systems, i.e., a numerical example and a sewage treatment process benchmark, are employed to show the effectiveness of the proposed method.

  18. Just-in-Time Adaptive Interventions (JITAIs) in Mobile Health: Key Components and Design Principles for Ongoing Health Behavior Support.

    Nahum-Shani, Inbal; Smith, Shawna N; Spring, Bonnie J; Collins, Linda M; Witkiewitz, Katie; Tewari, Ambuj; Murphy, Susan A

    2018-05-18

    The just-in-time adaptive intervention (JITAI) is an intervention design aiming to provide the right type/amount of support, at the right time, by adapting to an individual's changing internal and contextual state. The availability of increasingly powerful mobile and sensing technologies underpins the use of JITAIs to support health behavior, as in such a setting an individual's state can change rapidly, unexpectedly, and in his/her natural environment. Despite the increasing use and appeal of JITAIs, a major gap exists between the growing technological capabilities for delivering JITAIs and research on the development and evaluation of these interventions. Many JITAIs have been developed with minimal use of empirical evidence, theory, or accepted treatment guidelines. Here, we take an essential first step towards bridging this gap. Building on health behavior theories and the extant literature on JITAIs, we clarify the scientific motivation for JITAIs, define their fundamental components, and highlight design principles related to these components. Examples of JITAIs from various domains of health behavior research are used for illustration. As we enter a new era of technological capacity for delivering JITAIs, it is critical that researchers develop sophisticated and nuanced health behavior theories capable of guiding the construction of such interventions. Particular attention has to be given to better understanding the implications of providing timely and ecologically sound support for intervention adherence and retention.

  19. Helping Educators Find Visualizations and Teaching Materials Just-in-Time

    McDaris, J.; Manduca, C. A.; MacDonald, R. H.

    2005-12-01

    Major events and natural disasters like hurricanes and tsunamis provide geoscience educators with powerful teachable moments to engage their students with class content. In order to take advantage of these opportunities, educators need quality topical resources related to current earth science events. The web has become an excellent vehicle for disseminating this type of resource. In response to the 2004 Indian Ocean Earthquake and to Hurricane Katrina's devastating impact on the US Gulf Coast, the On the Cutting Edge professional development program developed collections of visualizations for use in teaching. (serc.carleton.edu/NAGTWorkshops/visualization/collections/ tsunami.html,serc.carleton.edu/NAGTWorkshops/visualization/ collections/hurricanes.html). These sites are collections of links to visualizations and other materials that can support the efforts of faculty, teachers, and those engaged in public outreach. They bring together resources created by researchers, government agencies and respected media sources and organize them for easy use by educators. Links are selected to provide a variety of different types of visualizations (e.g photographic images, animations, satellite imagery) and to assist educators in teaching about the geologic event reported in the news, associated Earth science concepts, and related topics of high interest. The cited links are selected from quality sources and are reviewed by SERC staff before being included on the page. Geoscience educators are encouraged to recommend links and supporting materials and to comment on the available resources. In this way the collection becomes more complete and its quality is enhanced.. These sites have received substantial use (Tsunami - 77,000 visitors in the first 3 months, Hurricanes - 2500 visitors in the first week) indicating that in addition to use by educators, they are being used by the general public seeking information about the events. Thus they provide an effective mechanism for

  20. Improving residents' handovers through just-in-time training for structured communication.

    Rourke, Liam; Amin, Aditi; Boyington, Curtiss; Ao, Peter; Frolova, Natalia

    2016-01-01

    In a recent quality assurance project we learned that nearly half of the handovers we examined were characterized as unsatisfactory by our residents, who provided examples in which their anxiety had been piqued and patient care had been affected. These reports substantiated a growing body of literature on the relationship between the quality of handover and the quality of patient care, so we sought to improve the quality and consistency of the in-hosptial handovers undertaken by our internal medicine residents. Senior residents attended morning report for three consecutive month long blocks and evaluated the quality of the handovers using an observational protocol comprised of 16 aspects of effective handover. During the first block, the resident observed a median of eight of the 16 practices occurring across the 46 handovers, and a large amount of variability. At the beginning of the subsequent block we presented a concise introduction to a structured handover procedure (SBARR). The median quality of the subsequent 33 handovers rose to 11, and the variability decreased considerably. In the next block we refined the SBARR orientation to focus on the errors observed in the previous blocks, and the improvement in the quality and variability was sustained. The minor change, which requires few resources to sustain, had a favourable impact on the quality of our residents' in-hospital handovers.

  1. Digital algorithms to recognize shot circuits just in right time. Digitale Algorithmen zur fruehzeitigen Kurzschlusserkennung

    Lindmayer, M.; Stege, M. (Technische Univ. Braunschweig (Germany, F.R.). Inst. fuer Elektrische Energieanlagen)

    1991-07-01

    Algorithms for early detection and prevention of short circuits are presented. Data on current levels and steepness in the a.c. network to be protected are evaluated by microcomputers. In particular, a simplified low-voltage grid is considered whose load circuit is formed in normal conditions by a serial R-L circuit. An optimum short-circuit detection algorithm is proposed for this network, which forecasts a current value from the current and steepness signals and compares this value with a limiting value. (orig.).

  2. Electronic tracking of human resource skills and knowledge, just in time training, manageable due diligence

    Kolodziej, M.A. [Quick Test International Inc., (Canada). Canadian Technology Human Resource Board; Baker, O. [KeySpan Energy Canada, Calgary, AB (Canada)

    2001-06-01

    KeySpan Energy Canada is in the process of obtaining recognition of various occupational profiles including pipeline operators, inspectors, and field and plant operators from various certifying organizations. The process of allowing individuals to obtain certification is recognized by Canadian Technology Human Resources Board as a step towards national standards for technologists and technicians. Proven competency is a must for workers in todays oil industry in response to increasingly stringent government safety regulations, environmental concerns and high public scrutiny. Quick Test international Inc. has developed a management tool in collaboration with end users at KeySpan Energy Canada. It is an electronic, Internet based competency tool for tracking personal competencies and maintaining continued competency. Response to the tool has been favourable. 2 refs., 4 figs.

  3. The buyer-supplier interface under just-in-time relationships.

    Newman, R G

    1990-08-01

    In any contractural relationship, legally and ethically, all parties much benefit. Minor concessions to one party can be significant gains for the other. To establish the win/win environment, it is sometimes necessary to make reasonable concessions that preserve the overall objective of the JIT concept. It is good business sense to make those concessions that are inexpensive and guarantee greater control. The concessions discussed strengthen the buyer-seller relationship and aid in reaching the objectives of JIT.

  4. Portable Just-in-Time Specialization of Dynamically Typed Scripting Languages

    Williams, Kevin; McCandless, Jason; Gregg, David

    In this paper, we present a portable approach to JIT compilation for dynamically typed scripting languages. At runtime we generate ANSI C code and use the system's native C compiler to compile this code. The C compiler runs on a separate thread to the interpreter allowing program execution to continue during JIT compilation. Dynamic languages have variables which may change type at any point in execution. Our interpreter profiles variable types at both whole method and partial method granularity. When a frequently executed region of code is discovered, the compilation thread generates a specialized version of the region based on the profiled types. In this paper, we evaluate the level of instruction specialization achieved by our profiling scheme as well as the overall performance of our JIT.

  5. In a warming climate, just how predictable are temperature extremes at weather and seasonal time scales?

    Landman, WA

    2011-10-01

    Full Text Available stream_source_info Landman7_2011.pdf.txt stream_content_type text/plain stream_size 3538 Content-Encoding ISO-8859-1 stream_name Landman7_2011.pdf.txt Content-Type text/plain; charset=ISO-8859-1 In a warming climate... at UK Met Office N9 members SA Japan UKUSA USA Brazil* SA SASA * IBSA-Ocean In use Near future Far future VCM/UTCM ENSEMBLES Strong anthropogenically forced warming trends have been observed over southern Africa and are projected...

  6. Just-in-Time Training: The Lessons of Hurricane Katrina, 10 Years Later

    Boerner, Heather

    2016-01-01

    Hurricane Katrina reshaped college workforce development programs as thoroughly as it did the coastline--but in this case, the changes were for the good of students, employers and the community. This article discusses the effects and changes made by 4 community colleges who were effected by Hurricane Katrina: (1) Louisiana Community and Technical…

  7. Rich context information for just-in-time adaptive intervention promoting physical activity.

    Cruciani, F; Nugent, C; Cleland, I; McCullagh, P

    2017-07-01

    Sedentary lifestyle and inadequate levels of physical activity represent two serious health risk factors. Nevertheless, within developed countries, 60% of people aged over 60 are deemed to be sedentary. Consequently, interest in behavior change to promote physical activity is increasing. In particular, the role of emerging mobile apps to facilitate behavior change has shown promising results. Smart technologies can help in providing rich context information including an objective assessment of the level of physical activity and information on the emotional and physiological state of the person. Collectively, this can be used to develop innovative persuasive solutions for adaptive behavior change. Such solutions offer potential in reducing levels of sedentary behavior. This work presents a study exploring new ways of employing smart technologies to facilitate behavior change. It is achieved by means of (i) developing a knowledge base on sedentary behaviors and recommended physical activity guidelines, and (ii) a context model able to combine information on physical activity, location, and a user's diary to develop a context-aware virtual coach with the ability to select the most appropriate behavior change strategy on a case by case basis.

  8. Just-in-Time techniques as applied to hazardous materials management

    Spicer, John S.

    1996-01-01

    Approved for public release; distribution is unlimited This study investigates the feasibility of integrating JIT techniques in the context of hazardous materials management. This study provides a description of JIT, a description of environmental compliance issues and the outgrowth of related HAZMAT policies, and a broad perspective on strategies for applying JIT to HAZMAT management. http://archive.org/details/justintimetechn00spic Lieutenant Commander, United States Navy

  9. Multiple biomarkers biosensor with just-in-time functionalization: Application to prostate cancer detection.

    Parra-Cabrera, C; Samitier, J; Homs-Corbera, A

    2016-03-15

    We present a novel lab-on-a-chip (LOC) device for the simultaneous detection of multiple biomarkers using simple voltage measurements. The biosensor functionalization is performed in-situ, immediately before its use, facilitating reagents storage and massive devices fabrication. Sensitivity, limit of detection (LOD) and limit of quantification (LOQ) are tunable depending on the in-chip flown sample volumes. As a proof-of-concept, the system has been tested and adjusted to quantify two proteins found in blood that are susceptible to be used combined, as a screening tool, to diagnose prostate cancer (PCa): prostate-specific antigen (PSA) and spondin-2 (SPON2). This combination of biomarkers has been reported to be more specific for PCa diagnostics than the currently accepted but rather controversial PSA indicator. The range of detection for PSA and SPON2 could be adjusted to the clinically relevant range of 1 to 10 ng/ml. The system was tested for specificity to the evaluated biomarkers. This multiplex system can be modified and adapted to detect a larger quantity of biomarkers, or different ones, of relevance to other specific diseases. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. "Just-In-Time" Simulation Training Using 3-D Printed Cardiac Models After Congenital Cardiac Surgery.

    Olivieri, Laura J; Su, Lillian; Hynes, Conor F; Krieger, Axel; Alfares, Fahad A; Ramakrishnan, Karthik; Zurakowski, David; Marshall, M Blair; Kim, Peter C W; Jonas, Richard A; Nath, Dilip S

    2016-03-01

    High-fidelity simulation using patient-specific three-dimensional (3D) models may be effective in facilitating pediatric cardiac intensive care unit (PCICU) provider training for clinical management of congenital cardiac surgery patients. The 3D-printed heart models were rendered from preoperative cross-sectional cardiac imaging for 10 patients undergoing congenital cardiac surgery. Immediately following surgical repair, a congenital cardiac surgeon and an intensive care physician conducted a simulation training session regarding postoperative care utilizing the patient-specific 3D model for the PCICU team. After the simulation, Likert-type 0 to 10 scale questionnaire assessed participant perception of impact of the training session. Seventy clinicians participated in training sessions, including 22 physicians, 38 nurses, and 10 ancillary care providers. Average response to whether 3D models were more helpful than standard hand off was 8.4 of 10. Questions regarding enhancement of understanding and clinical ability received average responses of 9.0 or greater, and 90% of participants scored 8 of 10 or higher. Nurses scored significantly higher than other clinicians on self-reported familiarity with the surgery (7.1 vs. 5.8; P = .04), clinical management ability (8.6 vs. 7.7; P = .02), and ability enhancement (9.5 vs. 8.7; P = .02). Compared to physicians, nurses and ancillary providers were more likely to consider 3D models more helpful than standard hand off (8.7 vs. 7.7; P = .05). Higher case complexity predicted greater enhancement of understanding of surgery (P = .04). The 3D heart models can be used to enhance congenital cardiac critical care via simulation training of multidisciplinary intensive care teams. Benefit may be dependent on provider type and case complexity. © The Author(s) 2016.

  11. Optimizing python-based ROOT I/O with PyPy's tracing just-in-time compiler

    Tlp Lavrijsen, Wim

    2012-12-01

    The Python programming language allows objects and classes to respond dynamically to the execution environment. Most of this, however, is made possible through language hooks which by definition can not be optimized and thus tend to be slow. The PyPy implementation of Python includes a tracing just in time compiler (JIT), which allows similar dynamic responses but at the interpreter-, rather than the application-level. Therefore, it is possible to fully remove the hooks, leaving only the dynamic response, in the optimization stage for hot loops, if the types of interest are opened up to the JIT. A general opening up of types to the JIT, based on reflection information, has already been developed (cppyy). The work described in this paper takes it one step further by customizing access to ROOT I/O to the JIT, allowing for fully automatic optimizations.

  12. Optimizing python-based ROOT I/O with PyPy's tracing just-in-time compiler

    Lavrijsen, Wim TLP

    2012-01-01

    The Python programming language allows objects and classes to respond dynamically to the execution environment. Most of this, however, is made possible through language hooks which by definition can not be optimized and thus tend to be slow. The PyPy implementation of Python includes a tracing just in time compiler (JIT), which allows similar dynamic responses but at the interpreter-, rather than the application-level. Therefore, it is possible to fully remove the hooks, leaving only the dynamic response, in the optimization stage for hot loops, if the types of interest are opened up to the JIT. A general opening up of types to the JIT, based on reflection information, has already been developed (cppyy). The work described in this paper takes it one step further by customizing access to ROOT I/O to the JIT, allowing for fully automatic optimizations.

  13. The conceptualization of a Just-In-Time Adaptive Intervention (JITAI) for the reduction of sedentary behavior in older adults.

    Müller, Andre Matthias; Blandford, Ann; Yardley, Lucy

    2017-01-01

    Low physical activity and high sedentary behavior in older adults can be addressed with interventions that are delivered through modern technology. Just-In-Time Adaptive Interventions (JITAIs) are an emerging technology-driven behavior-change intervention type and capitalize on data that is collected via mobile sensing technology (e.g., smartphones) to trigger appropriate support in real-life. In this paper we integrated behavior change and aging theory and research as well as knowledge around older adult's technology use to conceptualize a JITAI targeting the reduction of sedentary behavior in older adults. The JITAIs ultimate goal is to encourage older adults to take regular activity breaks from prolonged sitting. As a proximal outcome, we suggest the number of daily activity breaks from sitting. Support provided to interrupt sitting time can be based on tailoring variables: (I) the current accumulated sitting time; (II) the location of the individual; (III) the time of the day; (IV) the frequency of daily support prompts; and (V) the response to previous support prompts. Data on these variables can be collected using sensors that are commonly inbuilt into smartphones (e.g., accelerometer, GPS). Support prompts might be best delivered via traditional text messages as older adults are usually familiar and comfortable with this function. The content of the prompts should encourage breaks from prolonged sitting by highlighting immediate benefits of sitting time interruptions. Additionally, light physical activities that could be done during the breaks should also be presented (e.g., walking into the kitchen to prepare a cup of tea). Although the conceptualized JITAI can be developed and implemented to test its efficacy, more work is required to identify ways to collect, aggregate, organize and immediately use dense data on the proposed and other potentially important tailoring variables. Machine learning and other computational modelling techniques commonly used by

  14. "Just-in-Time" Personal Preparedness: Downloads and Usage Patterns of the American Red Cross Hurricane Application During Hurricane Sandy.

    Kirsch, Thomas D; Circh, Ryan; Bissell, Richard A; Goldfeder, Matthew

    2016-10-01

    Personal preparedness is a core activity but has been found to be frequently inadequate. Smart phone applications have many uses for the public, including preparedness. In 2012 the American Red Cross began releasing "disaster" apps for family preparedness and recovery. The Hurricane App was widely used during Hurricane Sandy in 2012. Patterns of download of the application were analyzed by using a download tracking tool by the American Red Cross and Google Analytics. Specific variables included date, time, and location of individual downloads; number of page visits and views; and average time spent on pages. As Hurricane Sandy approached in late October, daily downloads peaked at 152,258 on the day of landfall and by mid-November reached 697,585. Total page views began increasing on October 25 with over 4,000,000 page views during landfall compared to 3.7 million the first 3 weeks of October with a 43,980% increase in views of the "Right Before" page and a 76,275% increase in views of the "During" page. The Hurricane App offered a new type of "just-in-time" training that reached tens of thousands of families in areas affected by Hurricane Sandy. The app allowed these families to access real-time information before and after the storm to help them prepare and recover. (Disaster Med Public Health Preparedness. 2016;page 1 of 6).

  15. Development of a Just-in-Time Adaptive Intervention for Smoking Cessation Among Korean American Emerging Adults.

    Cerrada, Christian Jules; Dzubur, Eldin; Blackman, Kacie C A; Mays, Vickie; Shoptaw, Steven; Huh, Jimi

    2017-10-01

    Cigarette smoking is a preventable risk factor that contributes to unnecessary lung cancer burden among Korean Americans and there is limited research on effective smoking cessation strategies for this population. Smartphone-based smoking cessation apps that leverage just-in-time adaptive interventions (JITAIs) hold promise for smokers attempting to quit. However, little is known about how to develop and tailor a smoking cessation JITAI for Korean American emerging adult (KAEA) smokers. This paper documents the development process of MyQuit USC according to design guidelines for JITAI. Our development process builds on findings from a prior ecological momentary assessment study by using qualitative research methods. Semi-structured interviews and a focus group were conducted to inform which intervention options to offer and the decision rules that dictate their delivery. Qualitative findings highlighted that (1) smoking episodes are highly context-driven and that (2) KAEA smokers believe they need personalized cessation strategies tailored to different contexts. Thus, MyQuit USC operates via decision rules that guide the delivery of personalized implementation intentions, which are contingent on dynamic factors, to be delivered "just in time" at user-scheduled, high-risk smoking situations. Through an iterative design process, informed by quantitative and qualitative formative research, we developed a smoking cessation JITAI tailored specifically for KAEA smokers. Further testing is under way to optimize future versions of the app with the most effective intervention strategies and decision rules. MyQuit USC has the potential to provide cessation support in real-world settings, when KAEAs need them the most.

  16. A data-driven soft sensor for needle deflection in heterogeneous tissue using just-in-time modelling.

    Rossa, Carlos; Lehmann, Thomas; Sloboda, Ronald; Usmani, Nawaid; Tavakoli, Mahdi

    2017-08-01

    Global modelling has traditionally been the approach taken to estimate needle deflection in soft tissue. In this paper, we propose a new method based on local data-driven modelling of needle deflection. External measurement of needle-tissue interactions is collected from several insertions in ex vivo tissue to form a cloud of data. Inputs to the system are the needle insertion depth, axial rotations, and the forces and torques measured at the needle base by a force sensor. When a new insertion is performed, the just-in-time learning method estimates the model outputs given the current inputs to the needle-tissue system and the historical database. The query is compared to every observation in the database and is given weights according to some similarity criteria. Only a subset of historical data that is most relevant to the query is selected and a local linear model is fit to the selected points to estimate the query output. The model outputs the 3D deflection of the needle tip and the needle insertion force. The proposed approach is validated in ex vivo multilayered biological tissue in different needle insertion scenarios. Experimental results in five different case studies indicate an accuracy in predicting needle deflection of 0.81 and 1.24 mm in the horizontal and vertical lanes, respectively, and an accuracy of 0.5 N in predicting the needle insertion force over 216 needle insertions.

  17. Operational evaluation of high-throughput community-based mass prophylaxis using Just-in-time training.

    Spitzer, James D; Hupert, Nathaniel; Duckart, Jonathan; Xiong, Wei

    2007-01-01

    Community-based mass prophylaxis is a core public health operational competency, but staffing needs may overwhelm the local trained health workforce. Just-in-time (JIT) training of emergency staff and computer modeling of workforce requirements represent two complementary approaches to address this logistical problem. Multnomah County, Oregon, conducted a high-throughput point of dispensing (POD) exercise to test JIT training and computer modeling to validate POD staffing estimates. The POD had 84% non-health-care worker staff and processed 500 patients per hour. Post-exercise modeling replicated observed staff utilization levels and queue formation, including development and amelioration of a large medical evaluation queue caused by lengthy processing times and understaffing in the first half-hour of the exercise. The exercise confirmed the feasibility of using JIT training for high-throughput antibiotic dispensing clinics staffed largely by nonmedical professionals. Patient processing times varied over the course of the exercise, with important implications for both staff reallocation and future POD modeling efforts. Overall underutilization of staff revealed the opportunity for greater efficiencies and even higher future throughputs.

  18. Perception of CPR quality: Influence of CPR feedback, Just-in-Time CPR training and provider role.

    Cheng, Adam; Overly, Frank; Kessler, David; Nadkarni, Vinay M; Lin, Yiqun; Doan, Quynh; Duff, Jonathan P; Tofil, Nancy M; Bhanji, Farhan; Adler, Mark; Charnovich, Alex; Hunt, Elizabeth A; Brown, Linda L

    2015-02-01

    Many healthcare providers rely on visual perception to guide cardiopulmonary resuscitation (CPR), but little is known about the accuracy of provider perceptions of CPR quality. We aimed to describe the difference between perceived versus measured CPR quality, and to determine the impact of provider role, real-time visual CPR feedback and Just-in-Time (JIT) CPR training on provider perceptions. We conducted secondary analyses of data collected from a prospective, multicenter, randomized trial of 324 healthcare providers who participated in a simulated cardiac arrest scenario between July 2012 and April 2014. Participants were randomized to one of four permutations of: JIT CPR training and real-time visual CPR feedback. We calculated the difference between perceived and measured quality of CPR and reported the proportion of subjects accurately estimating the quality of CPR within each study arm. Participants overestimated achieving adequate chest compression depth (mean difference range: 16.1-60.6%) and rate (range: 0.2-51%), and underestimated chest compression fraction (0.2-2.9%) across all arms. Compared to no intervention, the use of real-time feedback and JIT CPR training (alone or in combination) improved perception of depth (pCPR quality was poor for chest compression depth (0-13%), rate (5-46%) and chest compression fraction (60-63%). Perception of depth is more accurate in CPR providers versus team leaders (27.8% vs. 7.4%; p=0.043) when using real-time feedback. Healthcare providers' visual perception of CPR quality is poor. Perceptions of CPR depth are improved by using real-time visual feedback and with prior JIT CPR training. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  19. Effects of a just-in-time educational intervention placed on wound dressing packages: a multicenter randomized controlled trial.

    Kent, Dea J

    2010-01-01

    I compared the effects of a just-in-time educational intervention (educational materials for dressing application attached to the manufacturer's dressing package) to traditional wound care education on reported confidence and dressing application in a simulated model. Nurses from a variety of backgrounds were recruited for this study. The nurses possessed all levels of education ranging from licensed practical nurse to master of science in nursing. Both novice and seasoned nurses were included, with no stipulations regarding years of nursing experience. Exclusion criteria included nurses who spent less than 50% of their time in direct patient care and nurses with advanced wound care training and/or certification (CWOCN, CWON). Study settings included community-based acute care facilities, critical access hospitals, long-term care facilities, long-term acute care facilities, and home care agencies. No level 1 trauma centers were included in the study for geographical reasons. Participants were randomly allocated to control or intervention groups. Each participant completed the Kent Dressing Confidence Assessment tool. Subjects were then asked to apply the dressing to a wound model under the observation of either the principal investigator or a trained observer, who scored the accuracy of dressing application according to established criteria. None of the 139 nurses who received traditional dressing packaging were able to apply the dressing to a wound model correctly. In contrast, 88% of the nurses who received the package with the educational guide attached to it were able to apply the dressing to a wound model correctly (χ2 = 107.22, df = 1, P = .0001). Nurses who received the dressing package with the attached educational guide agreed that this feature gave them confidence to correctly apply the dressing (88%), while no nurse agreed that the traditional package gave him or her the confidence to apply the dressing correctly (χ2 = 147.47, df = 4, P just-in-time

  20. Not just minor wild edible forest products: consumption of pteridophytes in sub-Saharan Africa.

    Maroyi, Alfred

    2014-12-22

    Gathering of wild edible plant resources by people in sub-Saharan Africa is discussed with reference to pteridophytes, which is an ancient plant group. Pteridophytes are crucial to food diversity and security in sub-Saharan Africa, although they are notably neglected as a result of inadequate research and agricultural development. Current research and agricultural development agenda still appear to focus on the popular and commonly used food crops, vegetables and fruits; ignoring minor and underutilized plant species such as pteridophytes which have shown significant potential as sources of macro and micro nutrients required to improve the diet of children and other vulnerable groups in sub-Saharan Africa. Documentation of edible pteridophytes is needed to reveal the importance of this plant group in the region and the associated indigenous knowledge about them; so that this knowledge can be preserved and utilized species used to combat dietary deficiencies as well as improve food security in the region. The aim of this study is to present an overview of food value of pteridophytes in sub-Saharan Africa using available literature and to highlight their potential in addressing dietary deficiencies in impoverished communities in the region. This study is based on review of the literature published in scientific journals, books, reports from national, regional and international organizations, theses, conference papers and other grey materials obtained from libraries and electronic search of Google Scholar, ISI Web of Science and Scopus. A total of 24 taxa belonging to 14 genera and 11 families are used in sub-Saharan Africa as fodder and human food. Pteridium aquilinum (L.) Kuhn is the most common edible pteridophyte in sub-Saharan Africa, used as human food in Angola, Cameroon, DRC, Gabon, Madagascar, Nigeria and South Africa, followed by Ophioglossum reticulatum L. (South Africa, Swaziland and Zanzibar), Ceratopteris thalictroides (L.) Brongn. (Madagascar and

  1. Adaptive online monitoring for ICU patients by combining just-in-time learning and principal component analysis.

    Li, Xuejian; Wang, Youqing

    2016-12-01

    Offline general-type models are widely used for patients' monitoring in intensive care units (ICUs), which are developed by using past collected datasets consisting of thousands of patients. However, these models may fail to adapt to the changing states of ICU patients. Thus, to be more robust and effective, the monitoring models should be adaptable to individual patients. A novel combination of just-in-time learning (JITL) and principal component analysis (PCA), referred to learning-type PCA (L-PCA), was proposed for adaptive online monitoring of patients in ICUs. JITL was used to gather the most relevant data samples for adaptive modeling of complex physiological processes. PCA was used to build an online individual-type model and calculate monitoring statistics, and then to judge whether the patient's status is normal or not. The adaptability of L-PCA lies in the usage of individual data and the continuous updating of the training dataset. Twelve subjects were selected from the Physiobank's Multi-parameter Intelligent Monitoring for Intensive Care II (MIMIC II) database, and five vital signs of each subject were chosen. The proposed method was compared with the traditional PCA and fast moving-window PCA (Fast MWPCA). The experimental results demonstrated that the fault detection rates respectively increased by 20 % and 47 % compared with PCA and Fast MWPCA. L-PCA is first introduced into ICU patients monitoring and achieves the best monitoring performance in terms of adaptability to changes in patient status and sensitivity for abnormality detection.

  2. Evaluation of a "Just-in-Time" Nurse Consultation on Bone Health: A Pilot Randomized Controlled Trial.

    Roblin, Douglas W; Zelman, David; Plummer, Sally; Robinson, Brandi E; Lou, Yiyue; Edmonds, Stephanie W; Wolinsky, Fredric D; Saag, Kenneth G; Cram, Peter

    2017-01-01

    Evidence is inconclusive whether a nurse consultation can improve osteoporosis-related patient outcomes. To evaluate whether a nurse consultation immediately after dual-energy x-ray absorptiometry (DXA) produced better osteoporosis-related outcomes than a simple intervention to activate adults in good bone health practices or usual care. Pilot randomized controlled trial, conducted within the larger Patient Activation After DXA Result Notification (PAADRN) trial (NCT01507662). After DXA, consenting adults age 50 years or older were randomly assigned to 3 groups: nurse consultation, PAADRN intervention (mailed letter with individualized fracture risk and an educational brochure), or usual care (control). Nurse consultation included reviewing DXA results, counseling on bone health, and ordering needed follow-up tests or physician referrals. Change from baseline to 52 weeks in participant-reported osteoporosis-related pharmacotherapy, lifestyle, activation and self-efficacy, and osteoporosis care satisfaction. Nurse consultation participants (n = 104) reported 52-week improvements in strengthening and weight-bearing exercise (p = 0.09), calcium intake (p Just-in-time" nurse consultation yielded a few improvements over 52 weeks in osteoporosis-related outcomes; however, most changes were not different from those obtained through the lower-cost PAADRN intervention or usual care.

  3. Stabilization and treatment of dental avulsions and fractures by emergency physicians using just-in-time training.

    McIntosh, Mark S; Konzelmann, Jason; Smith, Jeffrey; Kalynych, Colleen J; Wears, Robert L; Schneider, Howard; Wylie, Todd; Kaminski, Anne; Matar-Joseph, Madeline

    2009-10-01

    The objective of this investigation is to use a dental simulation model to compare splinting and bandaging methods for managing tooth avulsions and fractures, as measured by dentist evaluators for quality and time to complete each stabilization procedure. This was a randomized crossover study comparing 3 splinting techniques for managing a traumatically avulsed tooth (periodontal pack, wire, and bondable reinforcement ribbon) and 2 bandage techniques for managing a fractured tooth (calcium hydroxide paste and light-cured composite). After viewing a Just-in-Time training video, a convenience sample of emergency physicians performed the 5 stabilization techniques on dental models containing extracted teeth embedded in clay to simulate a segment of the human dentition. Data collected included time to complete each procedure, the evaluation of dentists about whether the procedure was performed satisfactorily or unsatisfactorily, and the ranking of dentists' and participants' preferred technique. Twenty-five emergency physicians participated in the study: 17 residents, 2 pediatric emergency medicine fellows, and 6 attending physicians. Reported median time, as well as minimum and maximum times to complete each splinting technique for an avulsed tooth, was as follows: periodontal pack 4.4 minutes (2.5 to 6.5 minutes), wire 8.6 minutes (5.8 to 12.9 minutes), and bondable reinforcement ribbon 8.9 minutes (5.6 to 15 minutes). Median time (and minimum and maximum times) to complete each protective bandaging technique for a fractured tooth was calcium hydroxide paste 4.6 minutes (3 to 9.6 minutes) and light-cured composite 7.1 minutes (5.5 to 14.1 minutes). When asked to choose a preferred splinting and bandaging technique according to the performance of the physicians, the dentists chose the bondable reinforcement ribbon 96% (24/25) and the light-cured composite 100% (25/25) of the time. Study participants had no measurable or agreeable preference for a particular splinting

  4. Use of Just in Time Maintenance of Reinforced Concrete Bridge Structures based on Real Historical Data Deterioration Models

    Abu-Tair A.

    2016-01-01

    Full Text Available Concrete is the backbone of any developed economy. Concrete can suffer from a large number of deleterious effects including physical, chemical and biological causes. Large owning bridge structures organizations are facing very serious questions when asking for maintenance budgets. The questions range from needing to justify the need for the work, its urgency, to also have to predict or show the consequences of delayed rehabilitation of a particular structure. There is therefore a need for a probabilistic model that can estimate the range of service lives of bridge populations and also the likelihood of level of deteriorations it can reached for every incremental time interval. A model was developed for such estimation based on statistical data from actual inspection records of a large reinforced concrete bridge portfolio. The method used both deterministic and stochastic methods to predict the service life of a bridge, using these service lives in combination with the just in time (JIT principle of management would enable maintenance managers to justify the need for action and the budgets needed, to intervene at the optimum time in the life of the structure and that of the deterioration. The paper will report on the model which is based on a large database of deterioration records of concrete bridges covering a period of over 60 years and include data from over 400 bridge structures. The paper will also illustrate how the service life model was developed and how these service lives combined with the JIT can be used to effectively allocate resources and use them to keep a major infrastructure asset moving with little disruption to the transport system and its users.

  5. Training student pharmacists to administer emergency pediatric influenza vaccine: A comparison of traditional vs. just-in-time training.

    Terriff, Colleen M; McKeirnan, Kimberly

    2017-07-01

    This study compared traditional training (TT) and just-in-time training (JITT) of P3 student pharmacists regarding interest, confidence, and comfort pre- and post-training (primary objective); and assessment and administration competency (secondary objective) during a simulated influenza vaccination clinic. Student pharmacists were randomized 1:1 to receive either TT or JITT, completed pre- and post-training surveys assessing interest, confidence and comfort; and evaluated on performance during a simulated emergency infant vaccination. An infant manikin simulated a child <1 year of age, and an actor role-played the mother. All students received a briefing about the simulated mass vaccination prior to their performance assessment. Survey differences between groups were analyzed by ANOVA. The competency assessment was analyzed by a Chi-square or Fisher's exact test for individual steps and Student t-test for mean scores. Pre-training interest was high and maintained post-training. Pre-training confidence and comfort levels were low and improved in both groups. Mean competency scores were comparable between the TT and JITT groups. Comparing groups, TT students more commonly missed proper injection site selection and care; while JITT missed distracting the infant and administration documentation. JITT for student pharmacists to learn skills required to immunize infants elicits similar outcomes (interest, confidence, comfort, and administration competency) as TT for emergency pediatric influenza vaccination. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Abortion in a just society.

    Hunt, M E

    1993-01-01

    A female Catholic theologian imagines a just society that does not judge women who decide to undergo an abortion. The Church, practitioners, and the courts must trust that women do make person-enhancing choices about the quality of life. In the last 15 years most progress in securing a woman's right to abortion has been limited to white, well-educated, and middle or upper middle class women. A just society would consider reproductive options a human right. Abortion providers are examples of a move to a just society; they are committed to women's well-being. There are some facts that make one pessimistic about achieving abortion in a just society. The US Supreme Court plans to review important decisions establishing abortion as a civil right. Further, some men insist on suing women who want to make their own reproductive decisions--an anti-choice tactic to wear away women's right to reproductive choice. Bombings of abortion clinics and harassment campaigns by anti-choice groups are common. These behaviors strain pro-choice proponents emotionally, psychically, and spiritually. Their tactics often lead to theologians practicing self-censorship because they fear backlash. Abortion providers also do this. Further, the reaction to AIDS is that sex is bad. Anti-abortion groups use AIDS to further their campaigns, claiming that AIDS is a punishment for sex. Strategies working towards abortion in a just society should be education and persuasion of policymakers and citizens about women's right to choose, since they are the ones most affected by abortion. Moreover, only women can secure their rights to abortion. In a just society, every health maintenance organization, insurance company, and group practice would consider abortion a normal service. A just society provides for the survival needs of the most marginalized.

  7. Pengaruh Penerapan Filosofi Just In Time (JIT pada Organisasi yang Menggunakan Activity Based Costing (Abc dalam Perhitungan Harga Pokok Produk

    Ahim Abdurahim

    2015-12-01

    Full Text Available Artikel ini membahas pengaruh lingkungan terhadap praktik akuntansi manajemen pada industri maju. Persaingan yang semakin ketat mendorong manajemen untuk melakukan berbagai inovasi untuk menyesuaikan strategi-strategi lama dengan strategi baru yang lebih relevan. Demikian pula asumsi-asumsi yang sudah tidak relevan lagi perlu direvisi. Konsep acceptable quality level (AQL yang lebih toleran terhadap adanya produk rusak atau produk cacat, cenderung menghambat kemampuan perusahaan dalam memuaskan konsumen, sehingga perlu diperbaharui dengan konsep Total Quality Control (TQC, yang lebih menjamin kualitas produk dan kepuasan konsumen. Demikian pula dalam perhitungan biaya produk, dengan pendekatan tradisional yang mengasumsikan elemen yang paling dominan dalam biaya produksi adalah biaya bahan baku. Dengan berubahnya lingkungan industri manufaktur yang dominan menggunakan sistem komputer serta peralatan robotik, menimbulkan terjadinya pergeseran asumsi tersebut, yang menyebabkan pendekatan tradisional tidak relevan lagi digunakan di lingkungan industri maju dalam perhitungan harga pokok.Tujuan penulisan ini membahas pula penerapan filosofi just in time di lingkungan industri maju serta pengaruhnya terhadap penerapan perhitungan harga pokok dengan pendekatan activity based costing (ABC.

  8. USULAN IMPLEMENTASI SISTEM PRODUKSI JUST IN TIME DENGAN KARTU KANBAN DI LINE PRODUKSI CORE MAKING DISA TIPE MESIN VERTIKAL PT AT INDONESIA

    Fajar Riyadi

    2015-02-01

    Full Text Available PT AT-Indonesia adalah perusahaan manufaktur otomotif, produk yang dihasilkan adalah untuk spare part mobil. Masalah yang terjadi pada proses produksi core adalah pemborosan produksi. Pemborosan tersebut adalah produksi membuat produk yang lebih banyak dibandingkan apa yang dibutuhkan, sehingga terjadi overstock yang berdampak penumpukan stok pada area store pada saat itu. Barang overstock tersebut malah mengakibatkan perusahaan harus mengeluarkan biaya yang lebih besar. Padahal kebijakan perusahaan untuk tahun 2014 adalah mengurangi biaya akibat lost produksi. Dengan adanya masalah tersebut maka yang akan dilakukan adalah perbaikan pada system produksi di bagian Core Dept. Metode perbaikan yang digunakan adalah menggunakan sistem produksi just in time atau sistem produksi tarik, dimana produksi core akan membuat barang yang dibutuhkan oleh proses selanjutnya. Dalam proses sistem tarik, pengontrolan produksi akan dibantu oleh kartu kanban. Kartu kanban yang digunakan adalah kartu kanban production instruction (PI-Kanban yang akan memberikan perintah produksi core dan kartu kanban part withdrawal (PW-Kanban yang akan berfungsi sebagai kartu pengambilan produk core.Dengan adanya perbaikan pada sistem produksi core, maka akan dicapai efisiensi proses produksi. Dimana produksi core akan membuat barang yang dibutuhkan saja. Sehingga akan menghemat biaya produksi sebesar Rp 7.611.229.   Kata kunci : System just in time, Kartu kanban, Kaizen, Sistem Tarik dan Sistem Dorong

  9. ICD-11 Gaming Disorder: Needed and just in time or dangerous and much too early?

    van den Brink, Wim

    2017-01-01

    In their debate contribution, Aarseth et al. (2016) strongly argue against the proposal of WHO ICD-11 (International Classification of Diseases, 11th revision) to include Gaming Disorder as a new diagnostic category emphasizing the fact that no consensus exists on the definition and the risk that gaming will be demonized and gamers stigmatized resulting in a tsunami of false positive referrals to treatment. In this commentary, it is argued that gaming is indeed just another relatively innocen...

  10. EFFECTS OF COOPERATIVE LEARNING MODEL TYPE STAD JUST-IN TIME BASED ON THE RESULTS OF LEARNING TEACHING PHYSICS COURSE IN PHYSICS SCHOOL IN PHYSICS PROGRAM FACULTY UNIMED

    Teguh Febri Sudarma

    2013-06-01

    Full Text Available Research was aimed to determine: (1 Students’ learning outcomes that was taught with just in time teaching based STAD cooperative learning method and STAD cooperative learning method (2 Students’ outcomes on Physics subject that had high learning activity compared with low learning activity. The research sample was random by raffling four classes to get two classes. The first class taught with just in time teaching based STAD cooperative learning method, while the second class was taught with STAD cooperative learning method. The instrument used was conceptual understanding that had been validated with 7 essay questions. The average gain values of students learning results with just in time teaching based STAD cooperative learning method 0,47 higher than average gain values of students learning results with STAD cooperative learning method. The high learning activity and low learning activity gave different learning results. In this case the average gain values of students learning results with just in time teaching based STAD cooperative learning method 0,48 higher than average gain values of students learning results with STAD cooperative learning method. There was interaction between learning model and learning activity to the physics learning result test in students

  11. Just-in-time control of Spo0A synthesis in Bacillus subtilis by multiple regulatory mechanisms.

    Chastanet, Arnaud; Losick, Richard

    2011-11-01

    The response regulator Spo0A governs multiple developmental processes in Bacillus subtilis, including most conspicuously sporulation. Spo0A is activated by phosphorylation via a multicomponent phosphorelay. Previous work has shown that the Spo0A protein is not rate limiting for sporulation. Rather, Spo0A is present at high levels in growing cells, rapidly rising to yet higher levels under sporulation-inducing conditions, suggesting that synthesis of the response regulator is subject to a just-in-time control mechanism. Transcription of spo0A is governed by a promoter switching mechanism, involving a vegetative, σ(A)-recognized promoter, P(v), and a sporulation σ(H)-recognized promoter, P(s), that is under phosphorylated Spo0A (Spo0A∼P) control. The spo0A regulatory region also contains four (including one identified in the present work) conserved elements that conform to the consensus binding site for Spo0A∼P binding sites. These are herein designated O(1), O(2), O(3), and O(4) in reverse order of their proximity to the coding sequence. Here we report that O(1) is responsible for repressing P(v) during the transition to stationary phase, that O(2) is responsible for repressing P(s) during growth, that O(3) is responsible for activating P(s) at the start of sporulation, and that O(4) is dispensable for promoter switching. We also report that Spo0A synthesis is subject to a posttranscriptional control mechanism such that translation of mRNAs originating from P(v) is impeded due to RNA secondary structure whereas mRNAs originating from P(s) are fully competent for protein synthesis. We propose that the opposing actions of O(2) and O(3) and the enhanced translatability of mRNAs originating from P(s) create a highly sensitive, self-reinforcing switch that is responsible for producing a burst of Spo0A synthesis at the start of sporulation.

  12. Typical Toddlers' Participation in "Just-in-Time" Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study.

    Holyfield, Christine; Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

    2017-08-15

    Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary "just in time" on an AAC application with minimized demands. A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10-22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age.

  13. MJIT - Manutenção por Just in Time: manutenção otimizante realizada no tempo exato baseado em condições operacionais

    Michitoshi Oishi

    1997-06-01

    Full Text Available O presente artigo investigou como as fábricas japonesas desenvolvem sua manutenção para redução das paradas de produção. Isto aumenta a qualidade e produtividade, evitando atraso na entrega dos produtos e satisfazendo as necessidades dos clientes. Além do TPM-Total Productive Maintenance, existe outro sistema de manutenção baseado nas condições operacionais do equipamento, realizando a manutenção no momento necessário, que pode ser chamado de MJ1T-Manutenção Por Jus In Time. Este sistema evita a manutenção baseada na estimativa de vida útil do equipamento que pode realizar a manutenção antes do momento necessário, como depois da quebra. Uma pesquisa qualitativa realizada em fábricas brasileiras, identificou o alto potencial e necessidade de implantação de um sistema de manutenção similar ao MJIT.This article investigated how Japanese factorys develop their maintenance to reduce productions pauses. It increases productivity and quality, avoides products late delivery and satisfies customers needs. Besides TPM-Total Productive Maintenance, there is another maintenance system based on equipment operational conditions doing the maintenance in the exact moment of necessity that can be called MJIT-Maintenance by Just In Time. It avoids unnecessary maintenance based on the estimated life time that may conduct to realize maintenance before the real necessity or after broken. A qualitative research in brasilian factorys identified a high potential and need of a mainenance system similar to MJIT.

  14. Modelling of just-in-sequence supply of manufacturing processes

    Bányai Tamás

    2017-01-01

    Full Text Available The customer oriented production led to the growth of complexity of manufacturing and connected logistics processes. In many production companies one of the largest asset on balance sheet is inventory. To avoid inventory problems and to be the winners of today’s market situation manufacturing companies try to decrease heavy inventory levels through just-in-time based supply strategies. The aim of this research work is to analyse these supply strategies. The first part of the paper describes the just-in-time based supply and summarises the most important characteristics of them. The second part focuses on the modelling of just-in-sequence based in-plant supply. The models makes it possible to determine different in-plant supply strategies.

  15. Evaluating Teachers' Support Requests When Just-in-Time Instructional Support is Provided to Introduce a Primary Level Web-Based Reading Program

    Wood, Eileen; Anderson, Alissa; Piquette-Tomei, Noella; Savage, Robert; Mueller, Julie

    2011-01-01

    Support requests were documented for 10 teachers (4 kindergarten, 4 grade one, and 2 grade one/two teachers) who received just-in-time instructional support over a 2 1/2 month period while implementing a novel reading software program as part of their literacy instruction. In-class observations were made of each instructional session. Analysis of…

  16. Effect of mobile technology featuring visual scene displays and just-in-time programming on communication turns by preadolescent and adolescent beginning communicators.

    Holyfield, Christine; Caron, Jessica Gosnell; Drager, Kathryn; Light, Janice

    2018-03-05

    Visual scene displays (VSDs) and just-in-time programming supports are augmentative and alternative communication (AAC) technology features with theoretical benefits for beginning communicators of all ages. The goal of the current study was to evaluate the effects of a communication application (app) on mobile technology that supported the just-in-time programming of VSDs on the communication of preadolescents and adolescents who were beginning communicators. A single-subject multiple-baseline across participant design was employed to evaluate the effect of the AAC app with VSDs programmed just-in-time by the researcher on the communication turns expressed by five preadolescents and adolescents (9-18 years old) who were beginning communicators. All five participants demonstrated marked increases in the frequency of their communication turns after the onset intervention. Just-in-time programming support and VSDs are two features that may positively impact communication for beginning communicators in preadolescence and adolescence. Apps with these features allow partners to quickly and easily capture photos of meaningful and motivating events and provide them immediately as VSDs with relevant vocabulary to support communication in response to beginning communicators' interests.

  17. ICD-11 Gaming Disorder: Needed and just in time or dangerous and much too early?

    van den Brink, Wim

    2017-09-01

    In their debate contribution, Aarseth et al. (2016) strongly argue against the proposal of WHO ICD-11 (International Classification of Diseases, 11th revision) to include Gaming Disorder as a new diagnostic category emphasizing the fact that no consensus exists on the definition and the risk that gaming will be demonized and gamers stigmatized resulting in a tsunami of false positive referrals to treatment. In this commentary, it is argued that gaming is indeed just another relatively innocent recreational activity with only a small minority losing control resulting in gaming-related problems. It is also argued that - despite a lack of full consensus on the diagnostic criteria - there are clear indications that Gaming Disorder is a relevant clinical entity worldwide and that official recognition as a mental disorder is urgently needed to facilitate the further development, accessibility, and reimbursement of the treatment.

  18. Just-in-time vaccines: Biomineralized calcium phosphate core-immunogen shell nanoparticles induce long-lasting CD8+ T cell responses in mice

    Zhou, Weibin; Moguche, Albanus; Chiu, David; Murali-Krishna, Kaja; Baneyx, François

    2014-01-01

    Distributed and on-demand vaccine production could be game-changing for infectious disease treatment in the developing world by providing new therapeutic opportunities and breaking the refrigeration “cold chain”. Here, we show that a fusion protein between a calcium phosphate binding domain and the model antigen ovalbumin can mineralize a biocompatible adjuvant in a single step. The resulting 50 nm calcium phosphate core-immunogen shell particles are comparable to soluble protein in inducing ovalbumin-specific antibody response and class switch recombination in mice. However, single dose vaccination with nanoparticles leads to higher expansion of ovalbumin-specific CD8+ T cells upon challenge with an influenza virus bearing the ovalbumin-derived SIINFEKL peptide, and these cells produce high levels of IFN-γ. Furthermore, mice exhibit a robust antigen-specific CD8+ T cell recall response when challenged with virus 8 months post-immunization. These results underscore the promise of immunogen-controlled adjuvant mineralization for just-in-time manufacturing of effective T cell vaccines. PMID:24275478

  19. New combinations of ‘flipped classroom with just in time teaching’ and learning analytics of student responses

    Alfredo Prieto Martín

    2018-01-01

    Full Text Available The results obtained thanks to the flipped classroom with ‘justin time’ teaching method are reviewed. This method allowed to know what the students did not understand after trying to study the instructive materials assigned to them. To achieve that the students work before class methods of marketing and gamification were developed. Methods for the analysis of student responses were also developed. The JiTT method allowes the teacher know in advance those aspects that are most interesting or most dificult to understand for the students as well as their most urgent doubts. Finally, we have developed methods to use the urgent doubts of the students to generate formative feedback and activities to do in the classroom. In the method named “flipped learning forte” the teacher answer the urgent doubts of his students. In the method named ‘flip in colours’ the teacher classify the doubts by their posible utility in the classroom using a color code. With the combined application of these methods in university courses the failure rate of the students has decreased and the mean grade in the exams for the assessment of learning has increased in more than one standard deviation. The rate of students that attain the level of mastery has increased, as well as the student evaluations about the teachers of these courses. Finally, the reasons underlying the efficacy of the proposed flipped method are discussed.

  20. Hematopoietic progenitor cell mobilization with "just-in-time" plerixafor approach is a cost-effective alternative to routine plerixafor use.

    Veltri, Lauren; Cumpston, Aaron; Shillingburg, Alexandra; Wen, Sijin; Luo, Jin; Leadmon, Sonia; Watkins, Kathy; Craig, Michael; Hamadani, Mehdi; Kanate, Abraham S

    2015-12-01

    Hematopoietic cell mobilization with granulocyte-colony stimulating factor (G-CSF) and plerixafor results in superior CD34+ cell yield compared with G-CSF alone in patients with myeloma and lymphoma. However, plerixafor-based approaches may be associated with high costs. Several institutions use a "just-in-time" plerixafor approach, in which plerixafor is only administered to patients likely to fail mobilization with G-CSF alone. Whether such an approach is cost-effective is unknown. We evaluated 136 patients with myeloma or lymphoma who underwent mobilization with 2 approaches of plerixafor utilization. Between January 2010 and October 2012, 76 patients uniformly received mobilization with G-CSF and plerixafor. Between November 2012 and June 2014, 60 patients were mobilized with plerixafor administered only to those patients likely to fail mobilization with G-CSF alone. The routine plerixafor group had a higher median peak peripheral blood CD34+ cell count (62 versus 29 cells/μL, P just-in-time" group, 40% (n = 24) completed adequate collection without plerixafor. There was no difference in mobilization failure rates. The mean plerixafor doses used was lower with "just-in-time" approach (1.3 versus 2.1, P = 0.0002). The mean estimated cost in the routine plerixafor group was higher (USD 27,513 versus USD 23,597, P = 0.01). Our analysis demonstrates that mobilization with a just-in-time plerixafor approach is a safe, effective, and cost-efficient strategy for HPC collection. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  1. A chronicle of just-in-time information: The secret to building first year university student wellbeing and resilience based on a three year initiative.

    Donnalee Taylor

    2017-03-01

    Full Text Available To date, little has been published on the provision of student-driven just-in-time information to support first year students. This chronicle of just-in-time curricular and extra-curricular student support information was designed early in 2014 and successfully disseminated to first year biomedical science students over three years at James Cook University, Townsville, Queensland, Australia. In 2016, the information was redeveloped to make the support information electronically available to a much broader student audience. This article provides a dissemination template of what just-in-time curricular and extra-curricular information is required by first year university students. In addition, it outlines how students’ need for this information was determined and how information was successfully created and disseminated over these three years to assist the students in their transition to and through university. The intention of this article is to contribute to the growing body of knowledge on student resilience and wellbeing and to provide a guide for anyone interested in supporting their students in a similar manner.

  2. A chronicle of just-in-time information: The secret to building first year university student wellbeing and resilience based on a three year initiative

    Donnalee Taylor

    2016-10-01

    Full Text Available To date, little has been published on the provision of student-driven just-in-time information to support first year students. This chronicle of just-in-time curricular and extra-curricular student support information was designed early in 2014 and successfully disseminated to first year biomedical science students over three years at James Cook University, Townsville, Queensland, Australia. In 2016, the information was redeveloped to make the support information electronically available to a much broader student audience. This article provides a dissemination template of what just-in-time curricular and extra-curricular information is required by first year university students. In addition, it outlines how students’ need for this information was determined and how information was successfully created and disseminated over these three years to assist the students in their transition to and through university. The intention of this article is to contribute to the growing body of knowledge on student resilience and wellbeing and to provide a guide for anyone interested in supporting their students in a similar manner.

  3. The potential distribution of invading Helicoverpa armigera in North America: is it just a matter of time?

    Darren J Kriticos

    Full Text Available Helicoverpa armigera has recently invaded South and Central America, and appears to be spreading rapidly. We update a previously developed potential distribution model to highlight the global invasion threat, with emphasis on the risks to the United States. The continued range expansion of H. armigera in Central America is likely to change the invasion threat it poses to North America qualitatively, making natural dispersal from either the Caribbean islands or Mexico feasible. To characterise the threat posed by H. armigera, we collated the value of the major host crops in the United States growing within its modelled potential range, including that area where it could expand its range during favourable seasons. We found that the annual value of crops that would be exposed to H. armigera totalled approximately US$78 billion p.a., with US$843 million p.a. worth growing in climates that are optimal for the pest. Elsewhere, H. armigera has developed broad-spectrum pesticide resistance; meaning that if it invades the United States, protecting these crops from significant production impacts could be challenging. It may be cost-effective to undertake pre-emptive biosecurity activities such as slowing the spread of H. armigera throughout the Americas, improving the system for detecting H. armigera, and methods for rapid identification, especially distinguishing between H. armigera, H. zea and potential H. armigera x H. zea hybrids. Developing biological control programs, especially using inundative techniques with entomopathogens and parasitoids could slow the spread of H. armigera, and reduce selective pressure for pesticide resistance. The rapid spread of H. armigera through South America into Central America suggests that its spread into North America is a matter of time. The likely natural dispersal routes preclude aggressive incursion responses, emphasizing the value of preparatory communication with agricultural producers in areas suitable for

  4. Neuroblastoma in Children: Just Diagnosed Information

    ... Financial Reports Watchdog Ratings Feedback Contact Select Page Neuroblastoma in Children – Just Diagnosed Home > Cancer Resources > Types ... Diagnosed Just Diagnosed In Treatment After Treatment Diagnosing Neuroblastoma Depending on the location of the tumor and ...

  5. Just-in-time consent: The ethical case for an alternative to traditional informed consent in randomized trials comparing an experimental intervention with usual care.

    Vickers, Andrew J; Young-Afat, Danny A; Ehdaie, Behfar; Kim, Scott Yh

    2018-02-01

    Informed consent for randomized trials often causes significant and persistent anxiety, distress and confusion to patients. Where an experimental treatment is compared to a standard care control, much of this burden is potentially avoidable in the control group. We propose a "just-in-time" consent in which consent discussions take place in two stages: an initial consent to research from all participants and a later specific consent to randomized treatment only from those assigned to the experimental intervention. All patients are first approached and informed about research procedures, such as questionnaires or tests. They are also informed that they might be randomly selected to receive an experimental treatment and that, if selected, they can learn more about the treatment and decide whether or not to accept it at that time. After randomization, control patients undergo standard clinical consent whereas patients randomized to the experimental procedure undergo a second consent discussion. Analysis would be by intent-to-treat, which protects the trial from selection bias, although not from poor acceptance of experimental treatment. The advantages of just-in-time consent stem from the fact that only patients randomized to the experimental treatment are subject to a discussion of that intervention. We hypothesize that this will reduce much of the patient's burden associated with the consent process, such as decisional anxiety, confusion and information overload. We recommend well-controlled studies to compare just-in-time and traditional consent, with endpoints to include characteristics of participants, distress and anxiety and participants' understanding of research procedures.

  6. Cas d'estudi: "Just in time" a la fàbrica de SEAT a Martorell

    G-IDEA, Grup d'Innovació Docent en Eines d'Aprenentatge en Direcció d'Empreses; Guitart Tarrés, Laura; Achcaoucaou Iallouchen, Fariza; Bernardo Vilamitjana, Mercè; Castán Farrero, José Ma. (José María); López Parada, José; Miravitlles Matamoros, Paloma; Núñez Carballosa, Ana; Valls Pasola, Jaume

    2009-01-01

    La fàbrica de Seat a Martorell va ser inaugurada el 1993 i és un dels centres de producció més avançats d'Europa. El 2007 la producció de vehicles en aquesta factoria va ser de 398.704 unitats. El sistema de producció just a temps aplicat a aquesta planta aporta un constant increment de l'eficiència i la qualitat dels processos de fabricació. El visionat d'un fragment del Programa Gran Angular de Televisió Espanyola Catalunya, amb el títol de "produir, Produir" permet que els estudiants pu...

  7. An ecological momentary intervention for smoking cessation: The associations of just-in-time, tailored messages with lapse risk factors.

    Hébert, Emily T; Stevens, Elise M; Frank, Summer G; Kendzor, Darla E; Wetter, David W; Zvolensky, Michael J; Buckner, Julia D; Businelle, Michael S

    2018-03-01

    Smartphone apps can provide real-time, tailored interventions for smoking cessation. The current study examines the effectiveness of a smartphone-based smoking cessation application that assessed risk for imminent smoking lapse multiple times per day and provided messages tailored to current smoking lapse risk and specific lapse triggers. Participants (N=59) recruited from a safety-net hospital smoking cessation clinic completed phone-based ecological momentary assessments (EMAs) 5 times/day for 3 consecutive weeks (1week pre-quit, 2weeks post-quit). Risk for smoking lapse was estimated in real-time using a novel weighted lapse risk estimator. With each EMA, participants received messages tailored to current level of risk for imminent smoking lapse and self-reported presence of smoking urge, stress, cigarette availability, and motivation to quit. Generalized linear mixed model analyses determined whether messages tailored to specific lapse risk factors were associated with greater reductions in these triggers than messages not tailored to specific triggers. Overall, messages tailored to smoking urge, cigarette availability, or stress corresponded with greater reductions in those triggers than messages that were not tailored to specific triggers (p's=0.02 to <0.001). Although messages tailored to stress were associated with greater reductions in stress than messages not tailored to stress, the association was non-significant (p=0.892) when only moments of high stress were included in the analysis. Mobile technology can be used to conduct real-time smoking lapse risk assessment and provide tailored treatment content. Findings provide initial evidence that tailored content may impact users' urge to smoke, stress, and cigarette availability. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Just-in-time rescue plerixafor in combination with chemotherapy and granulocyte-colony stimulating factor for peripheral blood progenitor cell mobilization.

    Smith, Veronica R; Popat, Uday; Ciurea, Stefan; Nieto, Yago; Anderlini, Paolo; Rondon, Gabriela; Alousi, Amin; Qazilbash, Muzaffar; Kebriaei, Partow; Khouri, Issa; de Lima, Marcos; Champlin, Richard; Hosing, Chitra

    2013-09-01

    Plerixafor, a recently approved peripheral blood progenitor cell mobilizing agent, is often added to granulocyte-colony stimulating factor (G-CSF) to mobilize peripheral blood progenitor cells in patients with lymphoma or myeloma who cannot mobilize enough CD34+ cells with G-CSF alone to undergo autologous stem cell transplantation. However, data are lacking regarding the feasibility and efficacy of just-in-time plerixafor in combination with chemotherapy and G-CSF. We reviewed the peripheral blood stem cell collection data of 38 consecutive patients with lymphoma (Hodgkin's and non-Hodgkin's) and multiple myeloma who underwent chemomobilization and high-dose G-CSF and just-in-time plerixafor to evaluate the efficacy of this treatment combination. All patients with multiple myeloma and all but one patient with lymphoma collected the minimum required number of CD34+ cells to proceed with autologous stem cell transplantation (>2 × 10(6) /kg of body weight). The median CD34+ cell dose collected in patients with non-Hodgkin lymphoma was 4.93 × 10(6) /kg of body weight. The median CD34+ cell dose collected for patients with multiple myeloma was 8.81 × 10(6) /kg of body weight. Plerixafor was well tolerated; no grade 2 or higher non-hematologic toxic effects were observed. Copyright © 2013 Wiley Periodicals, Inc.

  9. Autonomous Diagnostic Imaging Performed by Untrained Operator Using Augmented Reality as a Form of "Just-in-Time" Training

    Martin, David S.; Wang, Lui; Laurie, Steven S.; Lee, Stuart M. C.; Stenger, Michael B.

    2017-01-01

    We will address the Human Factors and Performance Team, "Risk of performance errors due to training deficiencies" by improving the JIT training materials for ultrasound and OCT imaging by providing advanced guidance in a detailed, timely, and user-friendly manner. Specifically, we will (1) develop an audio-visual tutorial using AR that guides non-experts through an abdominal trauma ultrasound protocol; (2) develop an audio-visual tutorial using AR to guide an untrained operator through the acquisition of OCT images; (3) evaluate the quality of abdominal ultrasound and OCT images acquired by untrained operators using AR guidance compared to images acquired using traditional JIT techniques (laptop-based training conducted before image acquisition); and (4) compare the time required to complete imaging studies using AR tutorials with images acquired using current JIT practices to identify areas for time efficiency improvements. Two groups of subjects will be recruited to participate in this study. Operator-subjects, without previous experience in ultrasound or OCT, will be asked to perform both procedures using either the JIT training with AR technology or the traditional JIT training via laptop. Images acquired by inexperienced operator-subjects will be scored by experts in that imaging modality for diagnostic and research quality; experts will be blinded to the form of JIT used to acquire the images. Operator-subjects also will be asked to submit feedback to improve the training modules used during the scans to improve future training modules. Scanned-subjects will be a small group individuals from whom all images will be acquired.

  10. Autonomous Diagnostic Imaging Performed by Untrained Operators using Augmented Reality as a Form of "Just-in-Time" Training

    Martin, D. S.; Wang, L.; Laurie, S. S.; Lee, S. M. C.; Fleischer, A. C.; Gibson, C. R.; Stenger, M. B.

    2017-01-01

    We will address the Human Factors and Performance Team, "Risk of performance errors due to training deficiencies" by improving the JIT training materials for ultrasound and OCT imaging by providing advanced guidance in a detailed, timely, and user-friendly manner. Specifically, we will (1) develop an audio-visual tutorial using AR that guides non-experts through an abdominal trauma ultrasound protocol; (2) develop an audio-visual tutorial using AR to guide an untrained operator through the acquisition of OCT images; (3) evaluate the quality of abdominal ultrasound and OCT images acquired by untrained operators using AR guidance compared to images acquired using traditional JIT techniques (laptop-based training conducted before image acquisition); and (4) compare the time required to complete imaging studies using AR tutorials with images acquired using current JIT practices to identify areas for time efficiency improvements. Two groups of subjects will be recruited to participate in this study. Operator-subjects, without previous experience in ultrasound or OCT, will be asked to perform both procedures using either the JIT training with AR technology or the traditional JIT training via laptop. Images acquired by inexperienced operator-subjects will be scored by experts in that imaging modality for diagnostic and research quality; experts will be blinded to the form of JIT used to acquire the images. Operator-subjects also will be asked to submit feedback to improve the training modules used during the scans to improve future training modules. Scanned-subjects will be a small group individuals from whom all images will be acquired.

  11. Just-in-Time Research: A Call to Arms for Research into Mobile Technologies in Higher Education

    Byrne-Davis, Lucie; Dexter, Hilary; Hart, Jo; Cappelli, Tim; Byrne, Ged; Sampson, Ian; Mooney, Jane; Lumsden, Colin

    2015-01-01

    Mobile technologies are becoming commonplace in society and in education. In higher education, it is crucial to understand the impact of constant access to information on the development of the knowledge and competence of the learner. This study reports on a series of four surveys completed by UK-based medical students (n = 443) who received…

  12. Effectiveness and cost analysis of "just-in-time" salvage plerixafor administration in autologous transplant patients with poor stem cell mobilization kinetics.

    Li, Jie; Hamilton, Ellie; Vaughn, Louette; Graiser, Michael; Renfroe, Heather; Lechowicz, Mary Jo; Langston, Amelia; Prichard, Jefferson Mark; Anderson, Darlene; Gleason, Charise; Lonial, Sagar; Flowers, Christopher R; Kaufman, Jonathan L; Waller, Edmund K

    2011-10-01

    Plerixafor is a recently Food and Drug Administration (FDA)-approved CXCR4 antagonist, which is combined with granulocyte-colony-stimulating factor (G-CSF) to facilitate stem cell mobilization of lymphoma and myeloma patients. To evaluate the effectiveness and the related costs of a "just-in-time" strategy of plerixafor administration, we performed a retrospective cohort study comparing 148 consecutive lymphoma and myeloma patients in whom mobilization was attempted during 2008 before the Food and Drug Administration (FDA) approval of plerixafor with 188 consecutive patients mobilized during 2009 after FDA approval. Plerixafor was administered to 64 of 188 patients considered to be at risk for mobilization failure due to either their medical history ("high risk," n = 23) or the occurrence of peripheral blood CD34+ count of fewer than 15 × 10(6) cells/L with a white blood cell count of greater than 10 × 10(9) cells/L after at least 5 days of G-CSF administration (just-in-time, n = 41). The success rates of collecting a minimum transplant CD34+ cell dose (≥2 × 10(6) cells/kg) or target cell dose (≥5 × 10(6) lymphoma or ≥10 × 10(6) CD34+ cells/kg myeloma) in the just-in-time patients compared favorably with the 36 poor mobilizers collected with G-CSF alone: 93% versus 72% and 42% versus 22%, respectively. The use of plerixafor in selected high-risk patients and poor mobilizers did not increase the total charges associated with stem cell collection when compared with poor mobilizers treated with G-CSF alone. The targeted use of plerixafor increased the overall success rate of mobilizing a minimum number of CD34+ cells from 93% to 98% in patients with hematologic malignancies scheduled for autotransplant and increased the overall charges associated with stem cell collection in all patients by an average of 17%. © 2011 American Association of Blood Banks.

  13. Just-in-time research: a call to arms for research into mobile technologies in higher education

    Lucie Byrne-Davis

    2015-04-01

    Full Text Available Mobile technologies are becoming commonplace in society and in education. In higher education, it is crucial to understand the impact of constant access to information on the development of the knowledge and competence of the learner. This study reports on a series of four surveys completed by UK-based medical students (n=443 who received tablet computers (iPads from their medical school during their 4th year of study. Students were surveyed prior to receiving the iPads and again regarding their usage and experiences at 2, 6 and 12 months post receipt of tablets. Findings indicate that students differed in their use of iPads but that the majority felt that tablets had impacted on their learning and the majority were using them frequently (at least once a day during learning. Almost half of the students reported that clinical supervisors had raised the possibility of tablets changing patient care. These results, although only descriptive, raise important questions about the impact of mobile technologies on learning.

  14. Just in Time: How Evidence-on-Demand Services Support Decision Making in Ontario's Child and Youth Mental Health Sector

    Notarianni, Maryann; Sundar, Purnima; Carter, Charles

    2016-01-01

    Using the best available evidence to inform decision making is important for the design or delivery of effective health-related services and broader public policy. Several studies identify barriers and facilitators to evidence-informed decision making in Canadian health settings. This paper describes how the Ontario Centre of Excellence for Child…

  15. Just in Time - Expecting Failure: Do JIT Principles Run Counter to DoD’s Business Nature?

    2014-04-01

    Regiment. The last several years witnessed both commercial industry and the Department of Defense (DoD) logistics supply chains trending to-ward an...moving items through a production system only when needed. Equating inventory to an avoidable waste instead of adding value to a company directly...Louisiana plant for a week, Honda Motor Company to suspend orders for Japanese-built Honda and Acura models, and pro- ducers of Boeing’s 787 to run billions

  16. Laboratory preparation questionnaires as a tool for the implementation of the Just in Time Teaching in the Physics I laboratories: Research training

    Miranda, David A.; Sanchez, Melba J.; Forero, Oscar M.

    2017-06-01

    The implementation of the JiTT (Just in Time Teaching) strategy is presented to increase the previous preparation of students enrolled in the subject Physics Laboratory I offered at the Industrial University of Santander (UIS), Colombia. In this study, a laboratory preparation questionnaire (CPL) was applied as a tool for the implementation of JiTT combined with elements of mediated learning. It was found that the CPL allows to improve the students’ experience regarding the preparation of the laboratory and the development of the experimental session. These questionnaires were implemented in an academic manager (Moodle) and a web application (lab.ciencias.uis.edu.co) was used to publish the contents essential for the preparation of the student before each practical session. The most significant result was that the students performed the experimental session with the basic knowledge to improve their learning experience.

  17. Mobile phone sensors and supervised machine learning to identify alcohol use events in young adults: Implications for just-in-time adaptive interventions.

    Bae, Sangwon; Chung, Tammy; Ferreira, Denzil; Dey, Anind K; Suffoletto, Brian

    2017-11-27

    Real-time detection of drinking could improve timely delivery of interventions aimed at reducing alcohol consumption and alcohol-related injury, but existing detection methods are burdensome or impractical. To evaluate whether phone sensor data and machine learning models are useful to detect alcohol use events, and to discuss implications of these results for just-in-time mobile interventions. 38 non-treatment seeking young adult heavy drinkers downloaded AWARE app (which continuously collected mobile phone sensor data), and reported alcohol consumption (number of drinks, start/end time of prior day's drinking) for 28days. We tested various machine learning models using the 20 most informative sensor features to classify time periods as non-drinking, low-risk (1 to 3/4 drinks per occasion for women/men), and high-risk drinking (>4/5 drinks per occasion for women/men). Among 30 participants in the analyses, 207 non-drinking, 41 low-risk, and 45 high-risk drinking episodes were reported. A Random Forest model using 30-min windows with 1day of historical data performed best for detecting high-risk drinking, correctly classifying high-risk drinking windows 90.9% of the time. The most informative sensor features were related to time (i.e., day of week, time of day), movement (e.g., change in activities), device usage (e.g., screen duration), and communication (e.g., call duration, typing speed). Preliminary evidence suggests that sensor data captured from mobile phones of young adults is useful in building accurate models to detect periods of high-risk drinking. Interventions using mobile phone sensor features could trigger delivery of a range of interventions to potentially improve effectiveness. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. "Just Go Away and Do It and You Get Marks": The Degradation of Language Teaching in Neoliberal Times

    Block, David; Gray, John

    2016-01-01

    The marketization of education in countries like the UK may be seen as part and parcel of the rise of neoliberalism as the dominant shaper of policy and practice in many societies from the late twentieth century onwards. This paper explores how marketization has impacted on two initial teacher preparation programmes and focuses on the Cambridge…

  19. Efficacy of just-in-time plerixafor rescue for Hodgkin's lymphoma patients with poor peripheral blood stem cell mobilization.

    Yuan, Shan; Nademanee, Auayporn; Kaniewski, Mark; Palmer, Joycelynne; Shayani, Sepideh; Wang, Shirong

    2014-08-01

    Plerixafor is a Food and Drug Administration-approved agent for improving peripheral blood stem cell (PBSC) mobilization in filgrastim (granulocyte-colony-stimulating factor [G-CSF])-stimulated patients with multiple myeloma and non-Hodgkin's lymphoma. Limited information is available on its use in Hodgkin's lymphoma (HL) patients. We describe our experience with plerixafor as an immediate rescue agent in HL patients with poor PBSC mobilization. We retrospectively reviewed the collection data of 27 consecutive HL patients at our center in whom plerixafor was added to rescue a failing PBSC collection after G-CSF and chemotherapy (26) or G-CSF alone (1). Plerixafor was added in 11 patients due to peripheral blood (PB) CD34+ counts that persisted below the threshold (>10 × 10(6) /L) to initiate collection (median, 1.47 × 10(6) ; range 0 × 10(6) -6.28 × 10(6) /L) and in 16 patients due to low collection yields, who had a median yield of 0.33 × 10(6) (0.14 × 10(6) -0.65 × 10(6) ) CD34+ cells/kg on the last collection before plerixafor administration. After a median of 2 (range, 2-4) collections with plerixafor, the patients collected a median of 1.82 × 10(6) (0.52 × 10(6) -11.14 × 10(6) ) CD34+ cells/kg. The addition of plerixafor enabled 20 patients (74.1%) to reach the 2.0 × 10(6) CD34+ cells/kg minimum required for autologous stem cell transplantation (ASCT) during the same collection cycle. Subsequent remobilization in three patients with plerixafor enabled all three to reach this goal. Plerixafor can be used in HL patients with poor mobilization as a rescue agent and boosts mobilization sufficiently in most patients in the same collection attempt, thus not only permitting ASCT, but also avoiding remobilization and the associated costs, treatment delays, and patient inconvenience. © 2014 AABB.

  20. Just-in-Time Training of the Evidence-Based Public Health Framework, Oklahoma, 2016-2017.

    Douglas, Malinda R; Lowry, Jon P; Morgan, Latricia A

    2018-03-07

    Training of practitioners on evidence-based public health has shown to be beneficial, yet overwhelming. Chunking information and proximate practical application are effective techniques to increase retention in adult learning. Evidence-based public health training for practitioners from African American and Hispanic/Latino community agencies and tribes/tribal nations incorporated these 2 techniques. The community-level practitioners alternated attending training and implementing the steps of the evidence-based public health framework as they planned state-funded programs. One year later, survey results showed that participants reported increased confidence in skills that were reinforced by practical and practiced application as compared with posttraining survey results. In addition, at 1 year, reported confidence in skills that were not fortified by proximate application decreased when compared with posttraining confidence levels. All 7 community programs successfully created individualized evidence-based action plans that included evidence-based practices and policies across socioecological levels that fit with the unique culture and climate of their own community.

  1. EFFECTIVE SAVINGS IN PRODUCTION TIMES AND COST

    ES OBE

    lamination process itself [5,6,7]. The purpose of this work is to fully expose, by means of experimental data, the ... takes staff to laminate such work piece (in cases of handlay-up processes) and machines. (for resin injection .... The unfinished layer of mat being laminated usually result in laminate products with rough surfaces ...

  2. Buoyed by geophysics : geophysics, just-in-time procurement help save millions on Ekwan pipeline buoyancy control

    Roche, P.

    2005-09-01

    Large-diameter natural gas pipelines buried in wet muskeg have the potential to rise to the surface due to buoyancy. Until recently, the most reliable method to prevent this was to attach specially manufactured bolt-on concrete weights at closely spaced intervals. However, these weights significantly increase capital budgets by millions of dollars because each weight weighs 2,540 kg and costs $1,000. A less costly alternative for buoyancy control in shallow muskeg is for the contractor to simply dig a deeper ditch. Another option is to hold down the pipeline by polyester straps attached to screw anchors. The challenge of applying these less costly options is that heavy equipment cannot be brought to the site to determine ground conditions until after all procurement, assessment and design is completed. Engineers must therefore select a buoyancy control measure based only on air photos and possibly a few drill holes. However, air photos do not indicate the depth of muskeg. Although some muskeg areas may turn out to be thick enough to avoid buoyancy control altogether, once construction is underway, it is too late to opt for cheaper alternatives. EnCana Corporation's 24-inch Ekwan pipeline was recently constructed through a remote area of British Columbia to connect the Greater Sierra natural gas discovery to a tie-in point on Nova Gas Transmission's northwest mainline. Air photos indicated that half of the route was through muskeg. AMEC E and C Services Inc. was responsible for the engineering and management of the project. The company used a combination of geophysical techniques to learn about the ground conditions. Toboggan mounted portable equipment was hauled by snowmobiles along trails made earlier by the survey crews. Ground penetrating radar assessed the muskeg thickness. Fixed frequency electromagnetic surveys also enhanced the results of the ground penetrating radar. The number of bolt-on weights was reduced from 9,000 to 3,700, a savings of $3

  3. Just-in-Time Evidence-Based E-mail “Reminders” in Home Health Care: Impact on Nurse Practices

    Murtaugh, Christopher M; Pezzin, Liliana E; McDonald, Margaret V; Feldman, Penny H; Peng, Timothy R

    2005-01-01

    Objective To test the effectiveness of two interventions designed to improve the adoption of evidence-based practices by home health nurses caring for heart failure (HF) patients. Data Sources/Study Setting Information on nurse practices was abstracted from the clinical records of patients admitted between June 2000 and November 2001 to the care of 354 study nurses at a large, urban, nonprofit home care agency. Study Design The study employed a randomized design with nurses assigned to usual care or one of two intervention groups upon identification of an eligible patient. The basic intervention was a one-time e-mail reminder highlighting six HF-specific clinical recommendations. The augmented intervention consisted of the initial e-mail reminder supplemented by provider prompts, patient education material, and clinical nurse specialist outreach. Data Collection At each home health visit provided by a study nurse to an eligible HF patient during the 45-day follow-up period, a structured chart abstraction tool was used to collect information on whether the nurse provided the care practices highlighted in the e-mail reminder. Principal Findings Both the basic and the augmented interventions greatly increased the practice of evidence-based care, according to patient records, in the areas of patient assessment and instructions about HF disease management. While not all results were statistically significant at conventional levels, intervention effects were positive in virtually all cases and effect magnitudes frequently were large. Conclusions The results of this randomized trial strongly support the efficacy of just-in-time evidence-based reminders as a means of changing clinical practice among home health nurses who are geographically dispersed and spend much of their time in the field. PMID:15960694

  4. Behavioral response to a just-in-time adaptive intervention (JITAI) to reduce sedentary behavior in obese adults: Implications for JITAI optimization.

    Thomas, J Graham; Bond, Dale S

    2015-12-01

    Just-in-time adaptive interventions (JITAIs) use mobile computers, sensors, and software analytics to automatically detect behavior and deliver tailored treatment. However, little is known about how JITAIs influence patterns of behavior or how best to design JITAIs for maximum effect. This study examined prompts and behavioral response to the B-MOBILE JITAI for reducing sedentary behavior (SB) in overweight/obese individuals. Thirty participants (83% women; 67% White, mean ± SD body mass index = 36.2 kg/m2) tested 3 conditions presented in a randomized counterbalanced order involving smartphone-based prompts for walking breaks of (a) 3 min after 30 SB min, (b) 6 min after 60 SB min, and (c) 12 min after 120 SB min. Participants carried the smartphone an average of 6.90 days during each 7-day condition, for an average of 14.94 hr per day. The 3- and 6-min conditions resulted in the greatest number of prompts, walking breaks, the best adherence to prompts, the greatest amount of daily time spent in walking breaks, and fastest adherence to prompts (ps < .01). Small but statistically significant decreases in the number of daily walking breaks, adherence to prompts, and minutes per day spent in walking breaks were observed as a function of the number of days spent in a condition (ps < .05). The B-MOBILE JITAI was effective in prompting breaks in sedentary behavior when it was most clinically relevant. Frequent prompts for small change may be an optimal strategy for shaping sedentary behavior, although more research is needed to determine how best to promote long-term adherence. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

  5. Return of the JITAI: Applying a Just-in-Time Adaptive Intervention Framework to the Development of m-Health Solutions for Addictive Behaviors.

    Goldstein, Stephanie P; Evans, Brittney C; Flack, Daniel; Juarascio, Adrienne; Manasse, Stephanie; Zhang, Fengqing; Forman, Evan M

    2017-10-01

    Lapses are strong indicators of later relapse among individuals with addictive disorders, and thus are an important intervention target. However, lapse behavior has proven resistant to change due to the complex interplay of lapse triggers that are present in everyday life. It could be possible to prevent lapses before they occur by using m-Health solutions to deliver interventions in real-time. Just-in-time adaptive intervention (JITAI) is an intervention design framework that could be delivered via mobile app to facilitate in-the-moment monitoring of triggers for lapsing, and deliver personalized coping strategies to the user to prevent lapses from occurring. An organized framework is key for successful development of a JITAI. Nahum-Shani and colleagues (2014) set forth six core elements of a JITAI and guidelines for designing each: distal outcomes, proximal outcomes, tailoring variables, decision points, decision rules, and intervention options. The primary aim of this paper is to illustrate the use of this framework as it pertains to developing a JITAI that targets lapse behavior among individuals following a weight control diet. We will detail our approach to various decision points during the development phases, report on preliminary findings where applicable, identify problems that arose during development, and provide recommendations for researchers who are currently undertaking their own JITAI development efforts. Issues such as missing data, the rarity of lapses, advantages/disadvantages of machine learning, and user engagement are discussed.

  6. Perceptions on the Impact of a Just-in-Time Room on Trainees and Supervising Physicians in a Pediatric Emergency Department.

    Thomas, Anita A; Uspal, Neil G; Oron, Assaf P; Klein, Eileen J

    2016-12-01

    Just-in-time (JIT) training refers to education occurring immediately prior to clinical encounters. An in situ JIT room in a pediatric emergency department (ED) was created for procedural education. We examined trainee self-reported JIT room use, its impact on trainee self-perception of procedural competence/confidence, and the effect its usage has on the need for intervention by supervising physicians during procedures. Cross-sectional survey study of a convenience sample of residents rotating through the ED and supervising pediatric emergency medicine physicians. Outcomes included JIT room use, trainee procedural confidence, and frequency of supervisor intervention during procedures. Thirty-one of 32 supervising physicians (97%) and 122 of 186 residents (66%) completed the survey, with 71% of trainees reporting improved confidence, and 68% reporting improved procedural skills ( P  < .05, +1.4-point average skills improvement on a 5-point Likert scale). Trainees perceived no difference among supervising physicians intervening in procedures with or without JIT room use ( P  = .30, paired difference -0.0 points). Nearly all supervisors reported improved trainee procedural confidence, and 77% reported improved trainee procedural skills after JIT room use ( P  < .05, paired difference +1.8 points); 58% of supervisors stated they intervene in procedures without trainee JIT room use, compared with 42% with JIT room use ( P  < .05, paired difference -0.4 points). Use of the JIT room led to improved trainee confidence and supervisor reports of less procedural intervention. Although it carries financial and time costs, an in situ JIT room may be important for convenient JIT training.

  7. Evaluation of Dutch guideline for just-in-time addition of plerixafor to stem cell mobilization in patients who fail with granulocyte-colony-stimulating factor.

    Bilgin, Yavuz M; Visser, Otto; Beckers, Erik A M; te Boome, Liane C J; Huisman, Cynthia; Ypma, Paula F; Croockewit, Alexandra J; Netelenbos, Tanja; Kramer, Ellen P A; de Greef, Georgine E

    2015-05-01

    Plerixafor in combination with granulocyte-colony-stimulating factor (G-CSF) is approved for the use of stem cell collection in patients who fail to mobilize on G-CSF. In 2009 the Stem Cell Working Party of the Dutch-Belgian Cooperative Trial group for Hematology Oncology (HOVON) composed a guideline for the use of plerixafor. According to this guideline it is recommended to add plerixafor to G-CSF in patients with circulating CD34+ cell counts of fewer than 20 × 10(6) /L on 2 consecutive days accompanied by increasing white blood cells. In this analysis we evaluated retrospectively the outcome of the use of this guideline in the Netherlands. In total 111 patients received plerixafor with a median one administration (range, one to four administrations). Of these patients 55.8% had non-Hodgkin lymphoma, 31.5% multiple myeloma, 8.1% Hodgkin lymphoma, and 4.5% nonhematologic malignancies. In 63.9% patients sufficient numbers of CD34+ cells were collected. In patients with multiple myeloma more successful mobilizations with plerixafor were observed compared to patients with non-Hodgkin lymphoma (71.4% vs. 61.3%). In patients with circulating CD34+ cell counts of at least 2.0 × 10(6) /L before administration of plerixafor a successful mobilization was achieved in 76.5%, and in the patients with very low (0-1 × 10(6) /L) circulating CD34+ cell counts the success rate was 44.2%. Application of the HOVON guideline on the just-in-time administration of plerixafor is effective for mobilization of hematopoietic stem cells in the majority of patients. Stem cell yield in patients with non-Hodgkin lymphoma was lower compared to patients with multiple myeloma. Also patients with very low circulating CD34+ cells before addition of plerixafor might benefit from this approach. © 2014 AABB.

  8. A clinically integrated curriculum in Evidence-based Medicine for just-in-time learning through on-the-job training: The EU-EBM project

    Horvath Andrea R

    2007-11-01

    Full Text Available Abstract Background Over the last years key stake holders in the healthcare sector have increasingly recognised evidence based medicine (EBM as a means to improving the quality of healthcare. However, there is considerable uncertainty about the best way to disseminate basic knowledge of EBM. As a result, huge variation in EBM educational provision, setting, duration, intensity, content, and teaching methodology exists across Europe and worldwide. Most courses for health care professionals are delivered outside the work context ('stand alone' and lack adaptation to the specific needs for EBM at the learners' workplace. Courses with modern 'adaptive' EBM teaching that employ principles of effective continuing education might fill that gap. We aimed to develop a course for post-graduate education which is clinically integrated and allows maximum flexibility for teachers and learners. Methods A group of experienced EBM teachers, clinical epidemiologists, clinicians and educationalists from institutions from eight European countries participated. We used an established methodology of curriculum development to design a clinically integrated EBM course with substantial components of e-learning. An independent European steering committee provided input into the process. Results We defined explicit learning objectives about knowledge, skills, attitudes and behaviour for the five steps of EBM. A handbook guides facilitator and learner through five modules with clinical and e-learning components. Focussed activities and targeted assignments round off the learning process, after which each module is formally assessed. Conclusion The course is learner-centred, problem-based, integrated with activities in the workplace and flexible. When successfully implemented, the course is designed to provide just-in-time learning through on-the-job-training, with the potential for teaching and learning to directly impact on practice.

  9. A clinically integrated curriculum in evidence-based medicine for just-in-time learning through on-the-job training: the EU-EBM project.

    Coppus, Sjors F P J; Emparanza, Jose I; Hadley, Julie; Kulier, Regina; Weinbrenner, Susanne; Arvanitis, Theodoros N; Burls, Amanda; Cabello, Juan B; Decsi, Tamas; Horvath, Andrea R; Kaczor, Marcin; Zanrei, Gianni; Pierer, Karin; Stawiarz, Katarzyna; Kunz, Regina; Mol, Ben W J; Khan, Khalid S

    2007-11-27

    Over the last years key stake holders in the healthcare sector have increasingly recognised evidence based medicine (EBM) as a means to improving the quality of healthcare. However, there is considerable uncertainty about the best way to disseminate basic knowledge of EBM. As a result, huge variation in EBM educational provision, setting, duration, intensity, content, and teaching methodology exists across Europe and worldwide. Most courses for health care professionals are delivered outside the work context ('stand alone') and lack adaptation to the specific needs for EBM at the learners' workplace. Courses with modern 'adaptive' EBM teaching that employ principles of effective continuing education might fill that gap. We aimed to develop a course for post-graduate education which is clinically integrated and allows maximum flexibility for teachers and learners. A group of experienced EBM teachers, clinical epidemiologists, clinicians and educationalists from institutions from eight European countries participated. We used an established methodology of curriculum development to design a clinically integrated EBM course with substantial components of e-learning. An independent European steering committee provided input into the process. We defined explicit learning objectives about knowledge, skills, attitudes and behaviour for the five steps of EBM. A handbook guides facilitator and learner through five modules with clinical and e-learning components. Focussed activities and targeted assignments round off the learning process, after which each module is formally assessed. The course is learner-centred, problem-based, integrated with activities in the workplace and flexible. When successfully implemented, the course is designed to provide just-in-time learning through on-the-job-training, with the potential for teaching and learning to directly impact on practice.

  10. THE EFFECT OF PROBLEM SOLVING LEARNING MODEL BASED JUST IN TIME TEACHING (JiTT ON SCIENCE PROCESS SKILLS (SPS ON STRUCTURE AND FUNCTION OF PLANT TISSUE CONCEPT

    Resha Maulida

    2017-11-01

    Full Text Available The purpose of this study was to determine the effect of Problem Solving learning model based Just in Time Teaching (JiTT on students' science process skills (SPS on structure and function of plant tissue concept. This research was conducted at State Senior High School in South Tangerang .The research conducted using the quasi-experimental with Nonequivalent pretest-Postest Control Group Design. The samples of this study were 34 students for experimental group and 34 students for the control group. Data was obtained using a process skill test instrument (essai type that has been tested for its validity and reliability. Result of data analysis by ANACOVA, show that there were significant difference of postest between experiment and control group, by controlling the pretest score (F = 4.958; p <0.05. Thus, the problem-solving learning based on JiTT proved to improve students’ SPS. The contribution of this treatment in improving the students’ SPS was 7.2%. This shows that there was effect of problem solving model based JiTT on students’ SPS on the Structure and function of plant tissue concept.

  11. Randomised controlled trial to assess the effect of a Just-in-Time training on procedural performance: a proof-of-concept study to address procedural skill decay.

    Branzetti, Jeremy B; Adedipe, Adeyinka A; Gittinger, Matthew J; Rosenman, Elizabeth D; Brolliar, Sarah; Chipman, Anne K; Grand, James A; Fernandez, Rosemarie

    2017-11-01

    A subset of high-risk procedures present significant safety threats due to their (1) infrequent occurrence, (2) execution under time constraints and (3) immediate necessity for patient survival. A Just-in-Time (JIT) intervention could provide real-time bedside guidance to improve high-risk procedural performance and address procedural deficits associated with skill decay. To evaluate the impact of a novel JIT intervention on transvenous pacemaker (TVP) placement during a simulated patient event. This was a prospective, randomised controlled study to determine the effect of a JIT intervention on performance of TVP placement. Subjects included board-certified emergency medicine physicians from two hospitals. The JIT intervention consisted of a portable, bedside computer-based procedural adjunct. The primary outcome was performance during a simulated patient encounter requiring TVP placement, as assessed by trained raters using a technical skills checklist. Secondary outcomes included global performance ratings, time to TVP placement, number of critical omissions and System Usability Scale scores (intervention only). Groups were similar at baseline across all outcomes. Compared with the control group, the intervention group demonstrated statistically significant improvement in the technical checklist score (11.45 vs 23.44, p<0.001, Cohen's d effect size 4.64), the global rating scale (2.27 vs 4.54, p<0.001, Cohen's d effect size 3.76), and a statistically significant reduction in critical omissions (2.23 vs 0.68, p<0.001, Cohen's d effect size -1.86). The difference in time to procedural completion was not statistically significant between conditions (11.15 min vs 12.80 min, p=0.12, Cohen's d effect size 0.65). System Usability Scale scores demonstrated excellent usability. A JIT intervention improved procedure perfromance, suggesting a role for JIT interventions in rarely performed procedures. © Article author(s) (or their employer(s) unless otherwise stated in

  12. Just love in live organ donation.

    Zeiler, Kristin

    2009-08-01

    Emotionally-related live organ donation is different from almost all other medical treatments in that a family member or, in some countries, a friend contributes with an organ or parts of an organ to the recipient. Furthermore, there is a long-acknowledged but not well-understood gender-imbalance in emotionally-related live kidney donation. This article argues for the benefit of the concept of just love as an analytic tool in the analysis of emotionally-related live organ donation where the potential donor(s) and the recipient are engaged in a love relation. The concept of just love is helpful in the analysis of these live organ donations even if no statistical gender-imbalance prevails. It is particularly helpful, however, in the analysis of the gender-imbalance in live kidney donations if these donations are seen as a specific kind of care-work, if care-work is experienced as a labour one should perform out of love and if women still experience stronger pressures to engage in care-work than do men. The aim of the article is to present arguments for the need of just love as an analytic tool in the analysis of emotionally-related live organ donation where the potential donor(s) and the recipient are engaged in a love relation. The aim is also to elaborate two criteria that need to be met in order for love to qualify as just and to highlight certain clinical implications.

  13. Science for All: Strengthening Pathways for Scientists and Engineers to Bring Real-World Relevancy to STEM Concepts During Just-in-Time Learning

    Klug Boonstra, S.

    2017-12-01

    With the advent and widespread adoption of virtual connectivity, it is possible for scientists, engineers, and other STEM professionals to reach every place the youth of America learn! Arizona State University's School of Earth and Space Exploration, in planned collaboration with national STEM organizations, agencies, and education partners, are proposing a bold, collaborative, national model that will better enable STEM professionals of all disciplines to meet the needs of their audiences more effectively and efficiently. STEM subject matter experts (SMEs) can bring timely and authentic, real-world examples that engage and motivate learners in the conceptual learning journey presented through formal and informal curricula while also providing a personal face and story of their STEM journey and experience. With over 6.2 million scientists and engineers, 55.6 million PreK-12 students, and 6.3 million community college students in the US, the possible reach, long-term impact, and benefits of the virtual, just-in-time interactions between SMEs, teachers, and students has the potential to provide the missing links of relevancy and real-world application that will engage learners and enhance STEM understanding at a higher, deeper level while having the capacity to do this at a national scale. Providing professional development training for the SMEs will be an essential element in helping them to understand where their STEM work is relevant and appropriate within educational learning progressions. The vision for STEM Connect will be to prepare the STEM SMEs to share their expertise in a way that will show the dynamic and iterative nature of STEM research and design, helping them to bring their STEM expertise to formal and informal learners in a strategic and meaningful way. Discussions with possible STEM Connect collaborators (e.g., national STEM member-based organizations, technology providers, federal agencies, and professional educational organizations) are underway

  14. Production and Comprehension of Time Reference in Korean Nonfluent Aphasia

    Lee, Jiyeon; Kwon, Miseon; Na, Hae Ri; Bastiaanse, Roelien; Thompson, Cynthia K.

    2015-01-01

    Objectives Individuals with nonfluent agrammatic aphasia show impaired production and comprehension of time reference via verbal morphology. However, cross-linguistic findings to date suggest inconsistent evidence as to whether tense processing in general is impaired or time reference to the past is selectively difficult in this population. This study examined production and comprehension of time reference via verb morphology in Korean-speaking individuals with nonfluent aphasia. Methods A group of 9 healthy controls and 8 individuals with nonfluent aphasia (5 for the production task) participated in the study. Sentence priming production and auditory sentence to picture matching tasks were used, parallel with the previous cross-linguistic experiments in English, Chinese, Turkish, and others. Results The participants with nonfluent aphasia showed different patterns of impairment in production and comprehension. In production, they were impaired in all time references with errors being dominated by substitution of incorrect time references and other morpho-phonologically well-formed errors, indicating a largely intact morphological affixation process. In comprehension, they showed selective impairment of the past, consistent with the cross-linguistic evidence from English, Chinese, Turkish, and others. Conclusion The findings suggest that interpretation of past time reference poses particular difficulty in nonfluent aphasia irrespective of typological characteristics of languages; however, in production, language-specific morpho-semantic functions of verbal morphology may play a significant role in selective breakdowns of time reference. PMID:26290861

  15. Web-Based Just-in-Time Information and Feedback on Antibiotic Use for Village Doctors in Rural Anhui, China: Randomized Controlled Trial.

    Shen, XingRong; Lu, Manman; Feng, Rui; Cheng, Jing; Chai, Jing; Xie, Maomao; Dong, Xuemeng; Jiang, Tao; Wang, Debin

    2018-02-14

    Excessive use of antibiotics is very common worldwide, especially in rural China; various measures that have been used in curbing the problem have shown only marginal effects. The objective of this study was to test an innovative intervention that provided just-in-time information and feedback (JITIF) to village doctors on care of common infectious diseases. The information component of JITIF consisted of a set of theory or evidence-based ingredients, including operation guideline, public commitment, and takeaway information, whereas the feedback component tells each participating doctor about his or her performance scores and percentages of antibiotic prescriptions. These ingredients were incorporated together in a synergetic way via a Web-based aid. Evaluation of JITIF adopted a randomized controlled trial design involving 24 village clinics randomized into equal control and intervention arms. Measures used included changes between baseline and endpoint (1 year after baseline) in terms of: percentages of patients with symptomatic respiratory or gastrointestinal tract infections (RTIs or GTIs) being prescribed antibiotics, delivery of essential service procedures, and patients' beliefs and knowledge about antibiotics and infection prevention. Two researchers worked as a group in collecting the data at each site clinic. One performed nonparticipative observation of the service process, while the other performed structured exit interviews about patients' beliefs and knowledge. Data analysis comprised mainly of: (1) descriptive estimations of beliefs or knowledge, practice of indicative procedures, and use of antibiotics at baseline and endpoint for intervention and control groups and (2) chi-square tests for the differences between these groups. A total of 1048 patients completed the evaluation, including 532 at baseline (intervention=269, control=263) and 516 at endpoint (intervention=262, control=254). Patients diagnosed with RTIs and GTIs accounted for 76.5% (407

  16. Just Us, Just Discussing: Imagined Homogeneities in the Gender Studies Classroom

    Karlsson, Lena

    2015-01-01

    This article explores practices of othering through formations of normative sameness in discussion-based seminar classrooms. It takes literary scholar Stanley Fish's question, "Is there a text in this class, or is it just us?", back into the classroom to explore the formation of a "just us," an imagined homogeneous interpretive…

  17. Just-in-time og økonomistyringen - når økonomistyringen skal støtte et udvalg af parametre i produktionsforløbet

    Nielsen, Steen

    2004-01-01

    Just-in-time (JIT) er efterhånden blevet et almindeligt anerkendt princip i virksomhedens indkøb, produktion og salg. JIT er mere end blot et princip, det er i høj grad en virksomheds filosofi og et tankesæt, som skal gennemsyre hele virksomheden, hvis princippet skal virke. Stort set alle nyere...

  18. Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

    Ritprasertsri, Thitima; Chutima, Parames

    2017-06-01

    In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

  19. Mitochondria in cancer: not just innocent bystanders.

    Frezza, Christian; Gottlieb, Eyal

    2009-02-01

    The first half of the 20th century produced substantial breakthroughs in bioenergetics and mitochondria research. During that time, Otto Warburg observed abnormally high glycolysis and lactate production in oxygenated cancer cells, leading him to suggest that defects in mitochondrial functions are at the heart of malignant cell transformation. Warburg's hypothesis profoundly influenced the present perception of cancer metabolism, positioning what is termed aerobic glycolysis in the mainstream of clinical oncology. While some of his ideas stood the test of time, they also frequently generated misconceptions regarding the biochemical mechanisms of cell transformation. This review examines experimental evidence which supports or refutes the Warburg effect and discusses the possible advantages conferred on cancer cells by 'metabolic transformation'.

  20. A conventional chemical reaction for use in an unconventional assay: A colorimetric immunoassay for aflatoxin B1 by using enzyme-responsive just-in-time generation of a MnO2 based nanocatalyst.

    Lai, Wenqiang; Zeng, Qiao; Tang, Juan; Zhang, Maosheng; Tang, Dianping

    2018-01-10

    The authors describe a colorimetric immunoassay for the model nalyte aflatoxin B 1 (AFB 1 ). It is based on the just-in-time generation of an MnO 2 nanocatalyst. Unlike previously developed immunoassay, the chromogenic reaction relies on the just-in-time formation of an oxidase mimic without the aid of the substrate. Potassium permanganate (KMnO 4 ) is converted into manganese dioxide (MnO 2 ) which acts as an oxidase mimic that catalyzes the oxidation 3,3',5,5'-tetramethylbenzidine (TMB) by oxygen to give a blue colored product. In the presence of ascorbic acid (AA), KMnO 4 is reduced to Mn(II) ions. This results in a decrease in the amount of MnO 2 nanocatalyst. Hence, the oxidation of TMB does not take place. By adding ascorbate oxidase, AA is converted into dehydroascorbic acid which cannot reduce KMnO 4 . Based on these observations, a colorimetric competitive enzyme immunoassay was developed where ascorbate oxidase and gold nanoparticle-labeled antibody against AFB 1 and magnetic beads carrying bovine serum albumin conjugated to AFB 1 are used for the determination of AFB 1 . In presence of AFB 1 , it will compete with the BSA-conjugated AFB 1 (on the magnetic beads) for the labeled antibody against AFB 1 on the gold nanoparticles. This makes the amount of ascorbate oxidase/anti-AFB 1 antibody-labeled gold nanoparticles, which conjugated on magnetic beads, reduce, and resulted in an increase of ascorbic acid. Under optimal conditions, the absorbance (measured at 652 nm) decreases with increasing AFB 1 concentrations in the range from 0.1 to 100 ng mL -1 , with a 0.1 ng mL -1 detection limit (at the 3S blank level). The accuracy of the assay was validated by analyzing spiked peanut samples. The results matched well with those obtained with a commercial ELISA kit. Conceivably, the method is not limited to aflatoxins but has a wide scope in that it may be applied to many other analytes for which respective antibodies are available. Graphical abstract

  1. A stochastic surplus production model in continuous time

    Pedersen, Martin Wæver; Berg, Casper Willestofte

    2017-01-01

    surplus production model in continuous time (SPiCT), which in addition to stock dynamics also models the dynamics of the fisheries. This enables error in the catch process to be reflected in the uncertainty of estimated model parameters and management quantities. Benefits of the continuous-time state......Surplus production modelling has a long history as a method for managing data-limited fish stocks. Recent advancements have cast surplus production models as state-space models that separate random variability of stock dynamics from error in observed indices of biomass. We present a stochastic......-space model formulation include the ability to provide estimates of exploitable biomass and fishing mortality at any point in time from data sampled at arbitrary and possibly irregular intervals. We show in a simulation that the ability to analyse subannual data can increase the effective sample size...

  2. Goods-Time Elasticity of Substitution in Health Production.

    Du, Juan; Yagihashi, Takeshi

    2017-11-01

    We examine how inputs for health production, in particular, medical care and health-enhancing time, are combined to improve health. The estimated elasticity of substitution from a constant elasticity of substitution production function is significantly less than one for the working-age population, rejecting the unit elasticity of substitution used in previous studies. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  3. Energy UK 2011? Give us just a little more time

    Darkwa, K.; O`Callaghan, P.W. [Nottingham Trent University, Nottingham (United Kingdom). Faculty of Environmental Studies

    1995-04-01

    The article analyses the trends from `published proved` fossil reserves, consumption and lives, both in the UK and globally. Despite fears of global warming, and the 1988 Toronto Protocol, energy consumption rates globally have increased 25% over the past two decades. And although they fluctuate, UK rates have not declined significantly. In the absence of imports UK indigenous fossil fuels will be depleted in 2011. The UK has vast reserves of coal, shale oil and peat, but is currently unable to complete with cheap imported fuel. The authors urge continuous review of the economic, political and social factors. 1 fig., 1 tab.

  4. Timing of product introduction in network economies under heterogeneous demand

    Winther, Christian Dahl

    This paper studies the introduction of a new and incompatible technology in a spatial market with network externalities. In competition with an established network, the entrant chooses how long to do research and a level of product differentiation, which determine the adoption patterns of consumers...... level of product differentiation that should be chosen by the sponsor of the new technology in equilibrium. Third, the formal relationship between these variables are derived under compatibility.  Fourth, the entering firm's problem is solved by numerical methods to gain insight into the optimal linkage...... between research time and product design....

  5. Synthesis of most polyene natural product motifs using just 12 building blocks and one coupling reaction.

    Woerly, Eric M; Roy, Jahnabi; Burke, Martin D

    2014-06-01

    The inherent modularity of polypeptides, oligonucleotides and oligosaccharides has been harnessed to achieve generalized synthesis platforms. Importantly, like these other targets, most small-molecule natural products are biosynthesized via iterative coupling of bifunctional building blocks. This suggests that many small molecules also possess inherent modularity commensurate with systematic building block-based construction. Supporting this hypothesis, here we report that the polyene motifs found in >75% of all known polyene natural products can be synthesized using just 12 building blocks and one coupling reaction. Using the same general retrosynthetic algorithm and reaction conditions, this platform enabled both the synthesis of a wide range of polyene frameworks that covered all of this natural-product chemical space and the first total syntheses of the polyene natural products asnipyrone B, physarigin A and neurosporaxanthin b-D-glucopyranoside. Collectively, these results suggest the potential for a more generalized approach to making small molecules in the laboratory.

  6. Synthesis of most polyene natural product motifs using just twelve building blocks and one coupling reaction

    Woerly, Eric M.; Roy, Jahnabi; Burke, Martin D.

    2014-01-01

    The inherent modularity of polypeptides, oligonucleotides, and oligosaccharides has been harnessed to achieve generalized building block-based synthesis platforms. Importantly, like these other targets, most small molecule natural products are biosynthesized via iterative coupling of bifunctional building blocks. This suggests that many small molecules also possess inherent modularity commensurate with systematic building block-based construction. Supporting this hypothesis, here we report that the polyene motifs found in >75% of all known polyene natural products can be synthesized using just 12 building blocks and one coupling reaction. Using the same general retrosynthetic algorithm and reaction conditions, this platform enabled the synthesis of a wide range of polyene frameworks covering all of this natural product chemical space, and first total syntheses of the polyene natural products asnipyrone B, physarigin A, and neurosporaxanthin β-D-glucopyranoside. Collectively, these results suggest the potential for a more generalized approach for making small molecules in the laboratory. PMID:24848233

  7. Neural correlates of time versus money in product evaluation

    Sebastian eLehmann

    2012-10-01

    Full Text Available The common saying time is money reflects the widespread belief in many people’s everyday life that time is valuable like money. Psychologically and neurophysiologically, however, these concepts seem to be quite different. This research replicates prior behavioral investigations by showing that merely mentioning time (compared to merely mentioning money leads participants to evaluate a product more positively. Beyond this finding, the present functional magnetic resonance imaging (fMRI experiment provides novel insight into the neurophysiological underpinnings of this behavioral effect by showing that more positive product evaluations in the time primes (compared to money primes are preceded by increased activation in the insula. Our data, therefore, support the idea of a time mindset that is different from a money mindset. Studies on the functional neuroanatomy of the insula have implicated this brain area in distinct but related psychological phenomena such as urging, addiction, loss aversion, and love. These functions imply greater personal connection between the consumer and a target subject or object and, thus, help explain why time-primed consumers rate products more positively.

  8. The Cross Product of Two Vectors Is Not Just Another Vector--A Major Misconception Being Perpetuated in Calculus and Vector Analysis Textbooks.

    Elk, Seymour B.

    1997-01-01

    Suggests that the cross product of two vectors can be more easily and accurately explained by starting from the perspective of dyadics because then the concept of vector multiplication has a simple geometrical picture that encompasses both the dot and cross products in any number of dimensions in terms of orthogonal unit vector components. (AIM)

  9. Real time production optimization

    Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division

    2004-07-01

    Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)

  10. A Just Distribution of Health Care in the Case of Orphan Medicinal Products: Aligning the Interests of European Economic Integration and National Welfare Policy

    Faeh, Andrea

    2012-01-01

    resources is concerned. The EU is very proactive in fostering research and development of medicinal products aimed at treating patients who suffer from rare diseases. The European incentive scheme (Regulation (EC) No. 141/2000) has been a considerable success but, although products are developed......, they are not necessarily available to the patient. This is due to the fact that decisions about the price and the reimbursement of these (very expensive) products are made at the national level. This article draws up a framework for distributing limited health resources where medicinal products for rare diseases (orphan...... medicine) are concerned. The provision in the Patients’ Rights Directive (Dir. 2011/27/EU) on cooperation in health care among the Member States is discussed through the lens of ‘solidarity’ (understood as mutual cooperation) in order to align and remedy the deficits in the system and guarantee the patient...

  11. Belief in a just what? : Demystifying just world beliefs by distinguishing sources of justice

    Stroebe, Katherine; Postmes, Tom; Täuber, Susanne; Stegeman, Alwin; John, Melissa-Sue

    2015-01-01

    People’s Belief in a Just World (BJW) plays an important role in coping with misfortune and unfairness. This paper demonstrates that understanding of the BJW concept, and its consequences for behavior, is enhanced if we specify what (or who) the source of justice might be. We introduce a new scale,

  12. Nuclear wastes: end product or just the end

    Anon.

    1977-01-01

    Until the nuclear fuel cycle is closed, nuclear power plants will operate at an economic disadvantage relative to fossil-fuel plants. Although eight new reprocessing plants for spent fuel are needed by 1980 to deal with the wastes that are accumulating, public reaction to nuclear wastes and the threat of plutonium proliferation has halted this portion of the cycle and required expanded storage facilities. ERDA expects to have a way to package wastes by 1978, but is still looking for an acceptable place for permanent storage. Public concerns center on the fear that levels of radioactivity will affect present and future generations and the fear that some plutonium will be diverted for use in weapons. These fears are examined and not found to be warranted as long as zero radiation and total safeguards are not the required goal

  13. Interactive Highlighting for Just-in-Time Formative Assessment during Whole-Class Instruction: Effects on Vocabulary Learning and Reading Comprehension

    Ponce, Héctor R.; Mayer, Richard E.; Figueroa, Verónica A.; López, Mario J.

    2018-01-01

    This article examines the effectiveness of a software that supports formative assessment in real-time of learners' vocabulary knowledge through an interactive highlighting method. Students in a classroom are given a passage on their computer screen and asked to highlight the words they do not understand. This information is summarized on the…

  14. Time series analysis of gold production in Malaysia

    Muda, Nora; Hoon, Lee Yuen

    2012-05-01

    Gold is a soft, malleable, bright yellow metallic element and unaffected by air or most reagents. It is highly valued as an asset or investment commodity and is extensively used in jewellery, industrial application, dentistry and medical applications. In Malaysia, gold mining is limited in several areas such as Pahang, Kelantan, Terengganu, Johor and Sarawak. The main purpose of this case study is to obtain a suitable model for the production of gold in Malaysia. The model can also be used to predict the data of Malaysia's gold production in the future. Box-Jenkins time series method was used to perform time series analysis with the following steps: identification, estimation, diagnostic checking and forecasting. In addition, the accuracy of prediction is tested using mean absolute percentage error (MAPE). From the analysis, the ARIMA (3,1,1) model was found to be the best fitted model with MAPE equals to 3.704%, indicating the prediction is very accurate. Hence, this model can be used for forecasting. This study is expected to help the private and public sectors to understand the gold production scenario and later plan the gold mining activities in Malaysia.

  15. Managing the Ranger uranium mine in the Alligator Rivers Region -there is much more to this business enterprise than just production

    Leggate, J.

    1984-01-01

    Environmental protection is very closely and continuously regulated at the Ranger uranium mine. Since the commencement of operations at Ranger the company has operated within these regulations and demonstrated clearly that yellowcake can be produced efficiently, economically and safely. The company also recognises that in order to ensure continuity of production, it will have to continue to operate within these strictly supervised regulations

  16. Just-in-Time Employees: UPS and the Knowledge Supply Chain. Tomorrow's Workplace Today: Profiles of Excellence in Business Leadership, Volume 1, Number 1.

    Alden, John

    All businesses are grappling with knowledge networks--finding the right employees at the right time with the right knowledge and skills. The National Alliance of Business, MIT, and others have been working on an intriguing way to look at labor supply and demand issues called knowledge supply chain management. UPS (United Parcel Service) manages…

  17. Belief in a Just What? Demystifying Just World Beliefs by Distinguishing Sources of Justice

    Stroebe, Katherine; Postmes, Tom; Täuber, Susanne; Stegeman, Alwin; John, Melissa-Sue

    2015-01-01

    People’s Belief in a Just World (BJW) plays an important role in coping with misfortune and unfairness. This paper demonstrates that understanding of the BJW concept, and its consequences for behavior, is enhanced if we specify what (or who) the source of justice might be. We introduce a new scale, the 5-Dimensional Belief in a Just Treatment Scale (BJT5), which distinguishes five causal dimensions of BJW (God, Nature, Other People, Self, Chance). We confirm the 5-factor structure of the BJT5. We then address whether the BJW should be considered a uni- and/or multi-dimensional construct and find support for our multi-dimensional approach. Finally, we demonstrate convergent and discriminant validity with respect to important correlates of BJW as well as action in response to important negative life events and societal attitudes. This work illustrates the importance of distinguishing causal dimensions with regard to who distributes justice. PMID:25803025

  18. Real time information management for improving productivity in metallurgical complexes

    Bascur, O.A.; Kennedy, J.P.

    1999-01-01

    Applying the latest information technologies in industrial plants has become a serious challenge to management and technical teams. The availability of real time and historical operations information to identify the most critical part of the processing system from mechanical integrity is a must for global plant optimization. Expanded use of plant information on the desktop is a standard tool for revenue improvement, cost reduction, and adherence to production constraints. The industrial component desktop supports access to information for process troubleshooting, continuous improvement and innovation by plant and staff personnel. Collaboration between groups enables the implementation of an overall process effectiveness index based on losses due to equipment availability, production and product quality. The key to designing technology is to use the Internet based technologies created by Microsoft for its marketplace-office automation and the Web. Time derived variables are used for process analysis, troubleshooting and performance assessment. Connectivity between metallurgical complexes, research centers and their business system has become a reality. Two case studies of large integrated mining/metallurgical complexes are highlighted. (author)

  19. Effects of Just-in-Time Online Training on Knowledge and Application of the Sheltered Instruction Observation Protocol (SIOP®) Model among In-Service Teachers

    Bose, Devshikha

    2012-01-01

    The purpose of this study was to determine whether there was a difference in knowledge and application of the SIOP ® Model among in-service teachers who participated in an online professional development course on the SIOP® Model. Although these teachers all participated in the same course, information on the number of English Language Learners…

  20. A clinically integrated curriculum in evidence-based medicine for just-in-time learning through on-the-job training: the EU-EBM project

    Coppus, Sjors F. P. J.; Emparanza, Jose I.; Hadley, Julie; Kulier, Regina; Weinbrenner, Susanne; Arvanitis, Theodoros N.; Burls, Amanda; Cabello, Juan B.; Decsi, Tamas; Horvath, Andrea R.; Kaczor, Marcin; Zanrei, Gianni; Pierer, Karin; Stawiarz, Katarzyna; Kunz, Regina; Mol, Ben W. J.; Khan, Khalid S.

    2007-01-01

    BACKGROUND: Over the last years key stake holders in the healthcare sector have increasingly recognised evidence based medicine (EBM) as a means to improving the quality of healthcare. However, there is considerable uncertainty about the best way to disseminate basic knowledge of EBM. As a result,

  1. Assimilation of LAI time-series in crop production models

    Kooistra, Lammert; Rijk, Bert; Nannes, Louis

    2014-05-01

    Agriculture is worldwide a large consumer of freshwater, nutrients and land. Spatial explicit agricultural management activities (e.g., fertilization, irrigation) could significantly improve efficiency in resource use. In previous studies and operational applications, remote sensing has shown to be a powerful method for spatio-temporal monitoring of actual crop status. As a next step, yield forecasting by assimilating remote sensing based plant variables in crop production models would improve agricultural decision support both at the farm and field level. In this study we investigated the potential of remote sensing based Leaf Area Index (LAI) time-series assimilated in the crop production model LINTUL to improve yield forecasting at field level. The effect of assimilation method and amount of assimilated observations was evaluated. The LINTUL-3 crop production model was calibrated and validated for a potato crop on two experimental fields in the south of the Netherlands. A range of data sources (e.g., in-situ soil moisture and weather sensors, destructive crop measurements) was used for calibration of the model for the experimental field in 2010. LAI from cropscan field radiometer measurements and actual LAI measured with the LAI-2000 instrument were used as input for the LAI time-series. The LAI time-series were assimilated in the LINTUL model and validated for a second experimental field on which potatoes were grown in 2011. Yield in 2011 was simulated with an R2 of 0.82 when compared with field measured yield. Furthermore, we analysed the potential of assimilation of LAI into the LINTUL-3 model through the 'updating' assimilation technique. The deviation between measured and simulated yield decreased from 9371 kg/ha to 8729 kg/ha when assimilating weekly LAI measurements in the LINTUL model over the season of 2011. LINTUL-3 furthermore shows the main growth reducing factors, which are useful for farm decision support. The combination of crop models and sensor

  2. Just-in-time cost-effective off-the-shelf remote telementoring of paramedical personnel in bedside lung sonography-a technical case study.

    Biegler, Nancy; McBeth, Paul B; Tevez-Molina, Martha C; McMillan, Janelle; Crawford, Innes; Hamilton, Douglas R; Kirkpatrick, Andrew W

    2012-12-01

    Remote telementored ultrasound (RTMUS) is a new discipline that allows a remote expert to guide variably experienced clinical responders through focused ultrasound examinations. We used the examination of the pleural spaces after tube thoracostomy (TT) removal by a nurse with no prior ultrasound experience as an illustrative but highly accurate example of the technique using a simple cost-effective system. The image outputs of a handheld ultrasound machine and a head-mounted Web camera were input into a customized graphical user interface and streamed over a freely available voice over Internet protocol system that allowed two-way audio and visual communication between the novice examiner and the remote expert. The bedside nurse was then guided to examine the anterior chest of a patient who had recently had bilateral TTs removed. The team sought to determine the presence or absence of any recurrent pneumothoraces using the standard criteria for the ultrasound diagnosis of post-removal pneumothorax (PTXs). An upright chest radiograph (CXR) was obtained immediately after the RTMUS examination. The RTMUS system enabled the novice user to learn how to hold the ultrasound probe, where to place it on the chest, and thereafter to diagnose a subtle unilateral PTX characterized as "tiny" on the subsequent formal CXR report. As ultrasound has almost limitless clinical utility, using simple but advanced informatics and communication technologies has potential to improve worldwide healthcare delivery. RTMUS could be used both to enhance the information content as well as to digitally document important physiologic findings in any clinical encounter wherever a portable ultrasound and Internet connectivity are available.

  3. Productivity analysis to overcome the limited availability of production time in SME FBS

    Nurhasanah, N.; Jingga; Aribowo, B.; Gayatri, AM; Mardhika, DA; Tanjung, WN; Suri, QA; Safitri, R.; Supriyanto, A.

    2017-12-01

    Good industrial development should pay attention to the human factor as the main driver. Condition of work procedures, work area, and environment can affect the production result because if not optimal, the production will run slowly. If the work system is less than optimal, the productivity will do so, the operator will work uncomfortably and be easy to undergo work fatigue, even it can cause work accidents. Thus, the optimal and ergonomic arrangement of the the overall work system mechanism and work environment design is required for workers to work well, regularly, safely and comfortably with the aim of improving work productivity. This research measures the performance in textile SME (Small and Medium Enterprise) located in Sukabumi which is SME FBS which produces children’s clothing. This performance measurement is aimed at improving the competitiveness of the textile IKM so that it has the equal competitiveness with other SMEs or with textile industries that already have their name in market. Based on the method of hour standard time and TOC calculation at 2 FBS CMT (Cut-Make-Trim) in Sukabumi, which are the CMT Margaluyu Village and CMT Purabaya Village, the result is that the standard time of shirt work on CMT Margaluyu Village is less than that of CMT Desa Purabaya. It can be seen that more effective in SME FBS production is by process method.

  4. LI-FI Has Just Been Tested In The Real World And It Is 100 Times Faster Than WI-FI

    Praneethkumar

    2015-08-01

    Full Text Available Light Fidelity refers to Visible Light Communication systems using light-emitting diodes as a medium to high-speed communication in a similar manner as WI-FI. Now a days where internet has become a major demand people are in a search for WI-FI hotspots. LI-FI is New Life of data communication is a better alternative to WI-FI in wireless communication. This paper proposes a survey on LI-FI Technology and analyzes its performance with respect to existing technology. The concept of LI-FI is data communication on fast flickering of light which is not detected by human eye but it is focused on photo detector which converts the on-off state into binary digital data. It has gained a huge popularity in two years of its invention. Such technology has brought not only greener but safer and cheaper future of communication.

  5. How, not just if, condoms are used: the timing of condom application and removal during vaginal sex among young people in England.

    Hatherall, B; Ingham, R; Stone, N; McEachran, J

    2007-02-01

    To assess the prevalence of, and factors associated with, vaginal penetration before condom application and following condom removal among young people in education in England. A large cross sectional survey (n = 1373) was conducted in educational establishments in England and sexual event diaries were completed by a subsample of young people over a 6 month period. Of the 375 survey respondents who reported having used a condom on the most recent occasion of vaginal sex, 6% had applied the condom after penetration and 6% had continued penetration after condom removal. Of the 74 diary respondents, 31% applied a condom late and 9% removed a condom early at least once over a 6 month period. The odds of "imperfect" condom use were found to decrease with overall consistency of condom use, confidence in correct condom use, positive reported relationship with mother, non-use of other contraception, and desire to use a condom. Given that late application and early removal of condoms fail to maximise their effectiveness as a method of STI prevention, it is important to address "imperfect" condom use and the factors associated with such use in public health policies and programmes. It is essential that young people understand the importance of using condoms consistently and correctly, and are also equipped with the skills and knowledge to do so.

  6. Evaluating Online Tutorials for University Faculty, Staff, and Students: The Contribution of Just-in-Time Online Resources to Learning and Performance

    Brill, Jennifer; Park, Yeonjeong

    2011-01-01

    The effective integration of current technologies in teaching and research is a high priority for today's universities. To support the technology skills of university faculty, staff, and students, the subject university's office for faculty training and support, provides free, 24/7 access to a collection of online technology tutorials leased from…

  7. An energy source which has come just in the nick of time; Une source d'energie qui tombe pile

    Jacquemin, Ch.

    1999-12-01

    Fifty-six projects from industrialists and public research organisms have been proposed to the 'fuel cell' research and technological innovation network. Moreover, a project carried out by the French PSA/Renault car manufacturers and devoted to the development of vehicles equipped with fuel cells has been labelled by the network. This short paper summarizes the aim and organization of the fuel cell network in the French scientific and technical program. (J.S.)

  8. Just-in-Time og Lean Manufacturing

    Michelsen, Aage U.

    2004-01-01

    Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping.......Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping....

  9. Just in Time Research: Privacy Practices

    Grama, Joanna Lyn

    2014-01-01

    The January 2014 edition of the ECAR Update subscriber newsletter included an informal poll on information privacy practices. The poll was intended to collect a quick snapshot of the higher education community's thoughts on this important topic during Data Privacy Month. Results of the poll will be used to inform EDUCAUSE research, programs,…

  10. Uma análise da metodologia Just-In-Time e do sistema Kanban de produção sob o enfoque da ciência da informação

    Lúcia Filomena de Almeida Guimarães

    Full Text Available A Ciência da Informação estuda os diversos aspectos da informação, envolvendo produção, organização, recuperação e distribuição. Dentro de uma empresa, a metodologia Just In Time (JIT busca o atendimento das necessidades dos clientes, garantindo qualidade e trabalhando com o mínimo possível de estoque. Assim, uma análise da importância da informação neste ambiente é apresentada, mostrando que o foco e a base de todos os conceitos e ferramentas do JIT é a informação como pilar para o conhecimento estratégico efetivo.

  11. Neural cascade of conflict processing: not just time-on-task

    McKay, Cameron C.; van den Berg, Berry; Woldorff, Marty G.

    2017-01-01

    In visual conflict tasks (e.g., Stroop or flanker), response times (RTs) are generally longer on incongruent trials relative to congruent ones. Two event-related-potential (ERP) components classically associated with the processing of stimulus conflict are the fronto-central, incongruency-related negativity (Ninc) and the posterior late-positive complex (LPC), which are derived from the ERP difference waves for incongruent minus congruent trials. It has been questioned, however, whether these effects, or other neural measures of incongruency (e.g., fMRI responses in the anterior cingulate), reflect true conflict processing, or whether such effects derive mainly from differential time-on-task. To address this question, we leveraged high-temporal-resolution ERP measures of brain activity during two behavioral tasks. The first task, a modified Erikson flanker paradigm (with congruent and incongruent trials), was used to evoke the classic RT and ERP effects associated with conflict. In the second, a non-conflict comparison condition, participants visually discriminated a single stimulus (with easy and hard discrimination conditions). Behaviorally, the parameters were titrated to yield similar RT effects of conflict and difficulty (27 ms). Neurally, both within-task contrasts showed an initial fronto-central negative-polarity wave (N2-latency effect), but they then diverged. In the difficulty difference wave, the initial negativity led directly into the posterior LPC, whereas in the incongruency contrast the initial negativity was followed a by a second fronto-central negative peak (Ninc), which was then followed by a considerably longer-latency LPC. These results provide clear evidence that the longer processing for incongruent stimulus inputs do not just reflect time-on-task or difficulty, but include a true conflict-processing component. PMID:28017818

  12. More than just a game: the role of simulation in the teaching of product design and entrepreneurship to mechanical engineering students

    Costello, Gabriel J.

    2017-11-01

    The purpose of this work is to contribute to the debate on the best pedagogical approach to developing undergraduate mechanical engineering skills to meet the requirements of contemporary complex working environments. The paper provides an example of using student-entrepreneur collaboration in the teaching of modules to Mechanical Engineering final-year students. Problem-based learning (PBL) is one of the most significant recent innovations in the area of education for the professions. This work proposes to make an original contribution by simulating a real-life entrepreneur interaction for the students. The current literature largely confines simulation-based learning to computer applications such as games. However, this paper argues that role playing by students interfacing with technology start-ups can also be regarded as 'simulation' in a wider sense. Consequently, the paper proposes the concept of simulation-action learning as an enhancement of PBL and to distinguish it from computer simulation.

  13. More than Just a Game: The Role of Simulation in The Teaching of Product Design and Entrepreneurship to Mechanical Engineering Students

    Costello, Gabriel J.

    2017-01-01

    The purpose of this work is to contribute to the debate on the best pedagogical approach to developing undergraduate mechanical engineering skills to meet the requirements of contemporary complex working environments. The paper provides an example of using student-entrepreneur collaboration in the teaching of modules to Mechanical Engineering…

  14. Just like in an airport”

    Grubb, Ane

    This paper presents an excerpt from an analytical chapter that investigates the socialisation between young volunteers in a non-membership based, digitally coordinated organisation of virtual tutoring. To frame the analysis, I start by outlining the overall field of research that the PhD project...

  15. Spanish Moss: Not Just Hanging in There

    Suriel, Regina L.

    2010-01-01

    Transforming science curricula into multicultural science curricula requires the infusion of materials and perspectives often omitted from classroom textbooks. One strategy that may help the development of such lessons is to design lessons that incorporate the cultural history behind the concept being taught. Presented in this article is a…

  16. Considerações acerca do planejamento e controle da produção por meio do sistema just in time aplicado ao segmento de embalagens de madeira

    Daniel Eleti

    2014-10-01

    Full Text Available Cada vez mais as empresas se deparam com um mercado competitivo, onde têm que se adaptar rapidamente para conseguir atender suas demandas. O PCP é um dos setores mais importantes de uma empresa e que tem um papel fundamental para alcançar tal objetivo. Com base nesse fato, este artigo mostra as diversas funções exercidas pelo setor conhecido como Planejamento e Controle da Produção (PCP, o sistema produtivo Just in Time (JIT e suas principais barreiras de implantação. Foram feitas também análises de como elaborar o planejamento da produção em todas as suas etapas e as possibilidades de programação, com especial enfoque na produção puxada e na dinâmica de controle da produção. O artigo em questão mostra também a atuação do PCP na produção de embalagens de madeira para exportação da empresa estudada por meio de um estudo de caso.

  17. Trustworthy Critical Infrastructures via Physics-Aware Just-Ahead-Of-Time Verification

    CERN. Geneva

    2017-01-01

    Dr. Saman Zonouz, assistant professor at Rutgers University, NJ and the director of the 4N6 Cyber Security and Forensics Laboratory is visiting CERN for a collaboration meeting. His previous works and research interests include PLC program analysis, security of embedded systems, and malware analysis and reverse engineering. Before the collaboration meeting, Dr. Zonouz is giving a 30-minutes-long talk, titled 'Trustworthy Critical Infrastructures via Physics-Aware Just-Ahead-Of-Time Verification', followed by Q&A and discussions. You can find the abstract of the talk below. The presentation is open to anyone interested, but please register on Indico to know the size of the room needed. (Please note the new room: 31/3-004, IT Auditorium.) Abstract Critical cyber-physical infrastructures, such as the power grid, integrate networks of computational and physical processes to provide the people across the globe with essential functionalities and services. Protecting these critical infrastructu...

  18. Time to buy or just buying time? The market reaction to bank rescue packages

    Michael R King

    2009-01-01

    This paper reviews the market reaction to bank rescue packages announced in six countries between October 2008 and January 2009. The study distinguishes the impact on creditors as seen in the change of CDS spreads from the impact on shareholders as seen in the movement of bank stock prices. Government interventions benefited creditors at the expense of shareholders, with bank CDS spreads narrowing around the announcements in all cases. Despite a brief positive reaction, bank stock prices cont...

  19. Improving workplace productivity--it isn't just about reducing absence.

    Harte, Kathy; Mahieu, Kathleen; Mallett, David; Norville, Julie; VanderWerf, Sander

    2011-01-01

    Employers must get more aggressive in their health and productivity strategies. A comprehensive strategy includes data analytics across health and lost-time programs, absence policies that meet today's needs for both employer and employee, health and wellness programs targeting modifiable health behaviors, and absence program administration that is aligned to operational goals. This article targets key aspects of a comprehensive long-term health and productivity strategic vision. An organization can use these aspects independently to address immediate tactical issues while it develops its broader strategy. The target areas include a view from the perspective of data management, absence program design and management, employee health and wellness, and behavioral health.

  20. Implementace analýzy FMEA v rámci logistické technologie Just-in-Sequence

    FRANĚK, Václav

    2013-01-01

    The main objective of this master thesis is to design implementation of FMEA analysis in logistics technology Just-in-Sequence at company Robert Bosch in České Budějovice. The operational objective is to define process and product produced by technology Just-in-Sequence. Analyze newly developed technology Just-in-Sequence and compare its advantages over the original method.

  1. Just Imaginary: Delimiting Social Inclusion in Higher Education

    Gale, Trevor; Hodge, Steven

    2014-01-01

    This paper explores the notion of a "just imaginary" for social inclusion in higher education. It responds to the current strategy of OECD nations to expand higher education and increase graduate numbers, as a way of securing a competitive advantage in the global knowledge economy. The Australian higher education system provides the case…

  2. Holdup time measurement by radioactive tracers in pulp production

    Roetzer, H.; Donhoffer, D.

    1988-12-01

    A batch of pulp was to be labelled before passing two bleaching towers of a pulp plant. Activated glass fibres were used as a tracer, which contained 24-Na with a half-life of 15 hours. It was shown in laboratory tests, that the glass fibres were suitable for transport studies of wood pulp. For use in the tests the fibres were activated and suspended in water. Due to the small diameter of the fibres (2-5 micrometers) this suspension shows physical properties very similar to the pulp. For detection six scintillation probes were mounted at different positions outside the bleaching tower. Radiation protection during the test was very easy due to the low total activity of the tracer material. Residence time distributions for both towers were measured. The successful tracer experiments show, that the method of labelling is suited for investigations of material transport in the pulp and paper industry. 3 figs., 11 refs., 2 tabs. (Author)

  3. Information Architecture in JASIST: Just Where Did We Come From?

    Dillon, Andrew

    2002-01-01

    Traces information architecture (IA) to a historical summit, supported by American Society for Information Science and Technology (ASIS&T) in May 2000 at Boston, MA. where several hundred gathered to thrash out the questions of just what IA was and what this field might become. Outlines the six IA issues discussed. (JMK)

  4. System-theoretic analysis of due-time performance in production systems

    David Jacobs

    1995-01-01

    Full Text Available Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipment size. This performance index is analyzed for both lean and mass manufacturing environments. In particular, it is shown that, to achieve a high due-time performance in a lean environment, the production system should be scheduled for a sufficiently small fraction of its average production rate. In mass production, due-time performance arbitrarily close to one can be achieved for any scheduling practice, up to the average production rate.

  5. Just war and nuclear weapons : just war theory and its application to the Korean nuclear weapons issue in Korean Christianity

    Son, Changwan

    2009-01-01

    This thesis is primarily an application of the Christian tradition of Just War to the problems arising from the basing of US nuclear weapons in South Korea and the development of nuclear weapons by the regime in the North. The Christian theology of Just War has developed over the last two thousand years, adapting as first Christianity became the state religion of the Roman Empire, through the break down of any enforceable norms in Europe‘s 'Dark Ages‘, to the emergence of the concept of th...

  6. System-theoretic analysis of due-time performance in production systems

    Jacobs David; Meerkov Semyon M.

    1995-01-01

    Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipme...

  7. Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules

    Ramli, Rizauddin; Yamamoto, Hidehiko; Abu Qudeiri, Jaber

    This paper considers the part input problem of a production system where two Flexible Transfer Lines (FTLs) consisting of an up-stream production line and a down-stream production line while operating under Just In Time (JIT) production management. The up-stream production line processes the raw material after receiving them from suppliers, and after processing them, delivers the processed product to a down-stream production line via a conveyer. In this paper, we have proposed a novel idea for a part input real time control system, known as Algorithm for Real Time Control of Part Input Systems (ARTCOPS). The algorithm is useful when FTLs are in operation under a production order that is different from the pre-decided production schedule. Simulations of virtual production systems have been carried out to verify that ARTCOPS is useful in real time control, although the production orders are different from the pre-decided production scheduling.

  8. Prophecy and Doubt in Just Above My Head

    Christopher Z. Hobson

    2015-09-01

    Full Text Available Written in the aftermath of the civil rights era’s expansive hopes, James Baldwin’s last novel, Just Above My Head (1979, examines a fundamental issue, the choice between hope and skepticism, or prophecy and doubt. Baldwin approaches this issue by questioning two cornerstone ideas of his fiction, the need for prophetic art and this art’s focus on anticipating a renovated society, often pictured in terms adapted from apocalyptic biblical texts and Gospel music lyrics. Just Above My Head is Baldwin’s fullest presentation of this kind of art and its linkage to apocalyptic hopes. He dramatizes these ideas in the art of his Gospel singer protagonist, particularly in a climactic scene of artistic dedication whose Gospel lyric envisions “tearing down the kingdom of this world.” Yet Baldwin also unsparingly questions these same ideas through plot and the blues-inflected skeptical-tragic consciousness of his narrator. Responding to a 1970s moment when hopes for transcendent justice seemed passé, Just Above My Head’s unique contribution is not to try to resolve the ideas it counterposes, but to face both the possible falseness of prophetic hope and our continuing need for it, and to present the necessity for choice in a final dream that holds the key to the novel’s meaning. In presenting this issue through a sustained double-voiced narrative that reexamines its author’s artistic practice and raises fundamental choices in outlook and conduct, Just Above My Head evidences the continuing artistic vitality of Baldwin’s late fiction.

  9. Creating a Fair and Just Culture in Schools of Nursing.

    Barnsteiner, Jane; Disch, Joanne

    2017-11-01

    : In recent years, health care organizations have been moving away from a culture that responds to errors and near misses with "shame and blame" and toward a fair and just culture. Such a culture encourages and rewards people for speaking up about safety-related concerns, thus allowing the information to be used for system improvement. In part 1 of this series, we reported on findings from a study that examined how nursing schools handled student errors and near misses. We found that few nursing schools had a policy or a reporting tool concerning these events; and that when policies did exist, the majority did not reflect the principles of a fair and just culture. This article, part 2 of the series, describes several strategies that nursing schools can use for creating such a culture.

  10. Quality Improvement, Inventory Management, Lead Time Reduction and Production Scheduling in High-Mix Manufacturing Environments

    2017-01-13

    Quality Improvement , Inventory Management, Lead Time Reduction and Production Scheduling in High-mix Manufacturing Environments by Sean Daigle B.S...Mechanical Engineering Chairman, Department Committee on Graduate Theses 2 Quality Improvement , Inventory Management, Lead Time Reduction and... Production Scheduling in High-mix Manufacturing Environments by Sean Daigle Submitted to the Department of Mechanical Engineering on January 13, 2017, in

  11. Accelerated stress testing in a time-driven product development process

    Lu, Y.; Loh, H.T.; Brombacher, A.C.; Ouden, den P.H.

    2000-01-01

    In order to compete in the market, companies have to produce the right products with a shorter time to market and at lower costs than before. Shorter time to market requires the product development process (PDP) to change the way of working from the classical ‘wait and react’ to anticipating and

  12. Warped product space-times

    An, Xinliang; Wong, Willie Wai Yeung

    2018-01-01

    Many classical results in relativity theory concerning spherically symmetric space-times have easy generalizations to warped product space-times, with a two-dimensional Lorentzian base and arbitrary dimensional Riemannian fibers. We first give a systematic presentation of the main geometric constructions, with emphasis on the Kodama vector field and the Hawking energy; the construction is signature independent. This leads to proofs of general Birkhoff-type theorems for warped product manifolds; our theorems in particular apply to situations where the warped product manifold is not necessarily Einstein, and thus can be applied to solutions with matter content in general relativity. Next we specialize to the Lorentzian case and study the propagation of null expansions under the assumption of the dominant energy condition. We prove several non-existence results relating to the Yamabe class of the fibers, in the spirit of the black-hole topology theorem of Hawking–Galloway–Schoen. Finally we discuss the effect of the warped product ansatz on matter models. In particular we construct several cosmological solutions to the Einstein–Euler equations whose spatial geometry is generally not isotropic.

  13. Products cooked in preheated versus non-preheated ovens. Baking times, calculated energy consumption, and product quality compared.

    Odland, D; Davis, C

    1982-08-01

    Plain muffins, yellow cake, baked custard, apple pie, tuna casserole, frozen tuna casserole, cheese soufflé, and meat loaf were baked in preheated and non-preheated standard gas, continuous-clean gas, standard electric, and self-cleaning electric ovens. Products generally required 5 min. or less extra baking time when cooked in non-preheated rather than in preheated ovens. The variability in baking times often was less between preheated and non-preheated ovens than among oven types. Calculated energy consumption values showed that usually less energy was required to bake products in non-preheated than in preheated ovens; savings averaged about 10 percent. Few significant differences were found in physical measurements or eating quality either between preheated and non-preheated ovens or among oven types. Overall, for the products tested, findings confirmed that preheating the oven is not essential for good product quality and, therefore, is an unnecessary use of energy.

  14. Decision policy scenarios for just-in-sequence (JIS) deliveries

    Cedillo-Campos, Miguel Gaston; Ruelas, Dario Morones; Lizarraga-Lizarraga, Giovanni; Gonzalez-Feliu, Jesus; Garza-Reyes, Jose Arturo

    2017-01-01

    The Just-in-Sequence (JIS) approach is evidencing advantages in efficiently managing variety-driven costs, and reducing the risk of disruption in sourcing, manufacturing companies and third-party logistics. This has increased its implementation in the manufacturing industry, especially in highly customized manufacturing sectors such as the automotive industry. However, despite its growing interest by manufacturers, scholarly research focused on JIS still remains limited. In this context, little has been done to study the effect of JIS on the fluidity of supply chains and processes of logistics suppliers as well as providing them with a decision making tool to optimise the sequencing of their deliveries. Therefore, the aim of this paper is to propose a genetic algorithm to evaluate different decision policy scenarios to reduce risks of supply disruptions at the final assembly line. Consequently, an algorithm considering a periodic review of the inventory that assumes a steady demand and short response times is developed and applied. Design/methodology/approach: Based on a literature review and real-life information, an abductive reasoning was performed and a case study application of the proposed algorithm conducted in the auto-industry. Findings: The results obtained from the case study indicate that the proposed genetic algorithm offers a reliable solution when facing variability in safety stocks that operate under assumptions such as: i) fixed costs; ii) high inventory turnover; iii) scarce previous information available concerning material requirements; and iv) replenishment services as core business value. Although the results are based on an auto-industry case study, they are equally applicable to other global supply chains. Originality/value: This paper is of interest to practitioners and academics alike as it complements and supports the very limited scholarly research on JIS by providing manufacturers and 3PL suppliers competing in mass customized

  15. Decision policy scenarios for just-in-sequence (JIS deliveries

    Miguel Gaston Cedillo-Campos

    2017-10-01

    Full Text Available Purpose: The Just-in-Sequence (JIS approach is evidencing advantages in efficiently managing variety-driven costs, and reducing the risk of disruption in sourcing, manufacturing companies and third-party logistics. This has increased its implementation in the manufacturing industry, especially in highly customized manufacturing sectors such as the automotive industry. However, despite its growing interest by manufacturers, scholarly research focused on JIS still remains limited. In this context, little has been done to study the effect of JIS on the fluidity of supply chains and processes of logistics suppliers as well as providing them with a decision making tool to optimise the sequencing of their deliveries. Therefore, the aim of this paper is to propose a genetic algorithm to evaluate different decision policy scenarios to reduce risks of supply disruptions at the final assembly line. Consequently, an algorithm considering a periodic review of the inventory that assumes a steady demand and short response times is developed and applied. Design/methodology/approach: Based on a literature review and real-life information, an abductive reasoning was performed and a case study application of the proposed algorithm conducted in the auto-industry. Findings: The results obtained from the case study indicate that the proposed genetic algorithm offers a reliable solution when facing variability in safety stocks that operate under assumptions such as: i fixed costs; ii high inventory turnover; iii scarce previous information available concerning material requirements; and iv replenishment services as core business value. Although the results are based on an auto-industry case study, they are equally applicable to other global supply chains. Originality/value: This paper is of interest to practitioners and academics alike as it complements and supports the very limited scholarly research on JIS by providing manufacturers and 3PL suppliers competing in

  16. Decision policy scenarios for just-in-sequence (JIS) deliveries

    Cedillo-Campos, Miguel Gaston; Ruelas, Dario Morones; Lizarraga-Lizarraga, Giovanni; Gonzalez-Feliu, Jesus; Garza-Reyes, Jose Arturo

    2017-07-01

    The Just-in-Sequence (JIS) approach is evidencing advantages in efficiently managing variety-driven costs, and reducing the risk of disruption in sourcing, manufacturing companies and third-party logistics. This has increased its implementation in the manufacturing industry, especially in highly customized manufacturing sectors such as the automotive industry. However, despite its growing interest by manufacturers, scholarly research focused on JIS still remains limited. In this context, little has been done to study the effect of JIS on the fluidity of supply chains and processes of logistics suppliers as well as providing them with a decision making tool to optimise the sequencing of their deliveries. Therefore, the aim of this paper is to propose a genetic algorithm to evaluate different decision policy scenarios to reduce risks of supply disruptions at the final assembly line. Consequently, an algorithm considering a periodic review of the inventory that assumes a steady demand and short response times is developed and applied. Design/methodology/approach: Based on a literature review and real-life information, an abductive reasoning was performed and a case study application of the proposed algorithm conducted in the auto-industry. Findings: The results obtained from the case study indicate that the proposed genetic algorithm offers a reliable solution when facing variability in safety stocks that operate under assumptions such as: i) fixed costs; ii) high inventory turnover; iii) scarce previous information available concerning material requirements; and iv) replenishment services as core business value. Although the results are based on an auto-industry case study, they are equally applicable to other global supply chains. Originality/value: This paper is of interest to practitioners and academics alike as it complements and supports the very limited scholarly research on JIS by providing manufacturers and 3PL suppliers competing in mass customized

  17. Buyer-Supplier Collaboration in New Product Development - Reduction of Ramp-up time for high-tech products

    Nielsen, Halvor Eid

    2015-01-01

    Product development has always been a key activity to gain competitive advantage. Especially in technology based industry, such as the maritime subsea industry. Due to increasing globalization and high competition from low cost countries, companies need to streamline the supply chain and development in order to get new product out on the market fast and efficient. Involving suppliers in the development have shown great effect on reduced development time and cost while increasing quality of...

  18. Belief in a just world, social influence and illness attributions: evidence of a just world boomerang effect.

    Lucas, Todd; Alexander, Sheldon; Firestone, Ira; Lebreton, James M

    2009-03-01

    Characteristics of individuals and illnesses can both influence receptivity to preventative health messages. We examined whether receptivity to health messages depends on interactions between illness characteristics and dispositional concern for justice. Participants considered the preventability of six illnesses after exposure to a message that manipulated personal responsibility for illness. Paradoxically, participants with strong just world beliefs reported greater preventability for less preventable illnesses, such as brain cancer, when exposed to an unpreventable health message. In parallel, participants with low justice beliefs reported less preventability for lung cancer when exposed to a preventable message. This just world boomerang effect suggests that individual dispositions and illness characteristics can interact in ways that can produce either acquiescence or opposition to persuasive health messages.

  19. FOCUS PARTICLES (JUST, EVEN, AND, ETC. IN THE ADVERTISEMENTS

    Danguolė Valančė

    2015-10-01

    Full Text Available The article has been prepared by carrying out the analysis of focus particles: just, even, and, etc. It is important to note that particles play a very important role in linguistic pragmatics: they convey additional meanings called the conventional implicatures, and in that way they strengthen their effect on the consumers. First, the article discusses slogans which were advertised in January – March 2014; then, it discusses how focus particles are used in these slogans, besides the attention which is drawn to the visual advertising and invitation design. The research of advertisements and slogans has approved the prior statement just partially, and for this reason two corpora of advertisement articles (from the fields of education and medicine were formed. They were analysed separately and later on compared in order to find out whether the focus particles are used similarly in different discourse advertisements. The comparison of the data has disclosed that the focus particles are more commonly used in the original texts related to Lithuania’s education than in the medical advertisements, which are mostly translations used to inform about new medical tools or medical treatment innovations. The research has been carried out by applying the method of corpus linguistics.

  20. Exploring Mediating and Moderating Influences on the Links between Cycle Time, Proficiency in Entry Timing and New Product Profitability

    Langerak, F.; Hultink, E.J.; Griffin, A.

    2006-01-01

    Development cycle time is the elapsed time from the beginning of idea generation to the moment that the new product is ready for market introduction. Market entry timing is contingent upon the new product’s cycle time. Only when the product is completed can a firm decide whether and when to enter

  1. Density of kinks just after a quench in an underdamped system

    Dziarmaga, Jacek

    1998-01-01

    A quench in an underdamped one dimensional $\\phi^4$ model is studied by analytical methods. The density of kinks just after the transition is proportional to the square root of the rate of the quench for slow quenches. If the quench is shorter that the relaxation time, then the density scales like the third root of the rate.

  2. Relaxation of ion energy spectrum just after turbulent heating pulse in TRIAM-1 tokamak

    Nakamura, Kazuo; Hiraki, Naoji; Nakamura, Yukio; Itoh, Satoshi [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1982-07-01

    The temporal evolution and spatial profile of the ion energy spectrum just after the application of a toroidal current pulse for turbulent heating are investigated experimentally in the TRIAM-1 tokamak and also numerically using the Fokker-Planck equation. The two-component ion energy spectrum formed by turbulent heating relaxes to a single one within tausub(i) (the ion collision time).

  3. Pair production in an electric field in a time-dependent gauge

    Barut, A.O.; Duru, I.H.

    1989-07-01

    A new nonperturbative method of calculation of the pair production in a constant electric field is presented in which the propagator is evaluated entirely by path-integration in a time-dependent potential. This gauge and the path integration correctly define all the normalizations. As a by-product we get also the Unruh formula since the constant electric field provides an accelerated frame. (author). 11 refs

  4. Oscillatory activity in the human basal ganglia: more than just beta, more than just Parkinson's disease.

    Alegre, Manuel; Valencia, Miguel

    2013-10-01

    The implantation of deep brain stimulators in different structures of the basal ganglia to treat neurological and psychiatric diseases has allowed the recording of local field potential activity in these structures. The analysis of these signals has helped our understanding of basal ganglia physiology in health and disease. However, there remain some major challenges and questions for the future. In a recent work, Tan et al. (Tan, H., Pogosyan, A., Anam, A., Foltynie, T., Limousin, P., Zrinzo, L., et al. 2013. Frequency specific activity in subthalamic nucleus correlates with hand bradykinesia in Parkinson's disease. Exp. Neurol. 240,122-129) take profit of these recordings to study the changes in subthalamic oscillatory activity during the hold and release phases of a grasping paradigm, and correlate the changes in different frequency bands with performance parameters. They found that beta activity was related to the release phase, while force maintenance related most to theta and gamma/HFO activity. There was no significant effect of the motor state of the patient on this latter association. These findings suggest that the alterations in the oscillatory activity of the basal ganglia in Parkinson's disease are not limited to the beta band, and they involve aspects different from movement preparation and initiation. Additionally, these results highlight the usefulness of the combination of well-designed paradigms with recordings in off and on motor states (in Parkinson's disease), or in different pathologies, in order to understand not only the pathophysiology of the diseases affecting the patients, but also the normal physiology of the basal ganglia. Copyright © 2013 Elsevier Inc. All rights reserved.

  5. How just and just how? A systematic review of social equity in conservation research

    Friedman, Rachel S.; Law, Elizabeth A.; Bennett, Nathan J.; Ives, Christopher D.; Thorn, Jessica P. R.; Wilson, Kerrie A.

    2018-05-01

    Background: Conservation decisions not only impact wildlife, habitat, and environmental health, but also human wellbeing and social justice. The inclusion of safeguards and equity considerations in the conservation field has increasingly garnered attention in international policy processes and amongst conservation practitioners. Yet, what constitutes an ‘equitable’ solution can take many forms, and how the concept is treated within conservation research is not standardized. This review explores how social equity is conceptualized and assessed in conservation research. Methods/Design: Using a structured search and screening process, we identified 138 peer-reviewed studies that addressed equity in relation to conservation actions. The authors developed a coding framework to guide the review process, focusing on the current state of, definitions used for, and means of assessing social equity in empirical conservation research. Review Results: Results show that empirical research on social equity in conservation is rapidly growing, with the majority of studies on the topic published only since 2009. Equity within conservation research is skewed toward distributional concerns and to a lesser extent procedural issues, with recognition and contextual equity receiving little attention. Studies are primarily situated in forested biomes of the Global South. Conservation interventions mostly resulted in mixed or negative impacts on equity. Synthesis and Discussion: Our results demonstrate the current limitations of research on equity in conservation, and raise challenging questions about the social impacts of conservation and how to ameliorate equity concerns. Framing of equity within conservation research would benefit from greater transparency of study motivation, more explicit definition of how equity is used within the study context, and consideration for how best to assess it. We recommend that the empirical conservation literature more deeply engage with different

  6. Rethinking the Concept of Just Noticeable Difference in Online Marketing

    Viktor Vojtko

    2014-12-01

    Full Text Available The main goal of this study is to answer a question whether the just noticeable difference (JND related marketing practices could survive in the world with social media and as a part of online marketing. Although the findings are limited, they suggest that using of such practices might be much riskier than it used to be before and marketers should be aware of that and consider their using more thoroughly. It also shows that usage of the agent based modelling (ABM can be helpful in dealing with problems like this one and can provide further insight into dynamics of processes on consumer markets where the social media play crucial role in spreading of information.

  7. 78 FR 52231 - 2013 Temporary Closure of I-395 Just South of Conway Street in the City of Baltimore to Vehicular...

    2013-08-22

    ..., will remain open during the time period of the event. There are five additional I-95 interchanges, just... Temporary Closure of I-395 Just South of Conway Street in the City of Baltimore to Vehicular Traffic To... Transportation Authority (MDTA) to temporarily close a portion of I-395 (just south of Conway Street in Baltimore...

  8. Worker's perceptions of time, time-use-attitudes and productivity

    E. Ben-Baruch; C. P. H. Myburgh; E. C. Anderssen

    1991-01-01

    Decreasing productivity and increasing wage demands are singled out as being crucial problems facing the economy of South Africa. Changes in the time perceptions and time-use-attitudes of workers could play a decisive role in increasing productivity. The relationships between time perception, needs, motivation and productivity are analysed. Culture, tradition, economy, and environment lend a specific significance to these variables. Workers in a technological society should be guided to adapt...

  9. Estimating primary production from oxygen time series: A novel approach in the frequency domain

    Cox, T.J.S.; Maris, T.; Soetaert, K.; Kromkamp, J.C.; Meire, P.; Meysman, F.J.R.

    2015-01-01

    Based on an analysis in the frequency domain of the governing equation of oxygen dynamics in aquatic systems, we derive a new method for estimating gross primary production (GPP) from oxygen time series. The central result of this article is a relation between time averaged GPP and the amplitude of

  10. Re-calibration of the apparent 25,000 to 35,000 ybp sea level high stand: Just a moment in time some 55,000 to 70,000 years ago

    Dockal, J.A. (Univ. of North Carolina, Wilmington, NC (United States). Dept. of Earth Sciences)

    1993-03-01

    Occurrences of shallow marine and strand line sediments at or near the elevation of modern mean sea level with radiocarbon dates in the range of 25,000--35,000 ybp have been reported from the Delmarva Peninsula to the Florida Peninsula. Such dates are in conflict with established sea level curves and have consequently been written off as much older samples contaminated with small amounts of young carbon. An alternate hypothesis is that the assumed near constancy of the galactic cosmic ray (GCR) flux and consequently the C-14 production rate is not totally correct. Be-10 concentrations from ice cores suggests that possibly twice in the last 100,000 years the earth has been briefly subjected to greatly enhanced GCR fluxes. Modeling effects of the increased but brief GCR flux on the total C-14 concentrations in the ocean and biosphere suggests that apparent C-14 dates of 25K to 35K ybp on certain marine deposits may actually reflect deposition during a very brief period of time somewhere between 55K to 70K ybp. Deposits possibly effected include but are not restricted to: an unnamed beach/shore face deposit at Mockhorn Is. Virginia, Diamond City Clay at Cape Lookout NC, Cape Fear Coquina in southeastern NC, Silver Bluff at Sapelo Is. GA, and an unnamed coarse sand at St. George Is., FL. Such deposits are depositionally associated with strand line processes, either near shore, beach, or estuarine. Characteristics of the C-14 dates from such deposits include great variability in age ranges for spatially close samples including association with non-finite samples and apparent violation of the principle of superposition where older material overlies apparently younger. Interpretation of such deposits suggest deposition at or near sea level during a period of falling sea level. Correlation of such deposits north to south along the Atlantic coast suggest continued influence of the glacial forebulge and deposition topographically 5 to 10 meters below modern mean sea level.

  11. Productivity for librarians how to get more done in less time

    Hines, Samantha

    2010-01-01

    Productivity for Librarians provides tips and tools for organizing, prioritizing and managing time along with reducing stress. The book presents a resources guide for continued learning about and exploration of productivity in relation to individual circumstances featuring motivation, procrastination and time management guidelines. Addressing the unique challenges faced by librarians, the author supplies a balanced view of a variety of tools and techniques for dealing with overwork and stress.there are many books on productivity, but none specifically targeted at library workers. We face uniqu

  12. Use of dwell time concept in fission product inventory assessment for CANDU reactors

    Bae, C.J.; Choi, J.H.; Hwang, H.R.; Seo, J.T.

    2003-01-01

    A realistic approach in calculating the initial fission product inventory within the CANFLEX-NU fuel has been assessed for its applicability to the single channel event safety analysis for CANDU reactors. This approach is based on the dwell time concept in which the accident is assumed to occur at the dwell time when the summation of fission product inventory for all isotopes becomes largest. However, in the current conservative analysis, the maximum total inventory and the corresponding gap inventory for each isotope are used as the initial fission product inventories regardless of the accident initiation time. The fission product inventory analysis has been performed using ELESTRES code considering power histories and burnup of the fuel bundles in the limiting channel. The analysis results showed that the total fission product inventory is found to be largest at 20% dwell time. Therefore, the fission product inventory at 20% dwell time can be used as the initial condition for the single channel event for the CANDU 6 reactors. (author)

  13. Room for manoeuvre in time of the workforce in dairy production systems

    Joel Carneiro dos Santos Filho

    2012-12-01

    Full Text Available The objective of this study was to characterize and to analyze the room for manoeuvre in time in dairy production systems (DPS. Two interviews were conducted in twenty DPS in the Northern region of Paraná, Brazil, with the following objectives: to know the management and practices involving the herd, the land area and the commercialization; and to qualify and evaluate the work organization. In order to build the variables, the repertory grid method was used, and for the typology, the graphic methodology of Bertin adapted to small samples was used. The results showed that the room for manoeuvre in time of the DPS, quantified in hours available per year, varied between the farmers and was related to routine work and seasonal work durations, as well as the autonomy of farmers to perform both works. The routine work was related to the number of cows, but was also explained by the herd management, by the transport equipment for the feed and by the workforce composition. Four types of work organization were identified between sampled DPS, based on room for manoeuvre in time and how they were built. Knowing the room for manoeuvre time and its variables, it is possible to guide the farmers to adjust their dairy production system in order to have more time available for other activities or to develop the dairy production system.

  14. Re-orientating time in product design : a phenomenology-inspired perspective

    Stienstra, J.T.; Hengeveld, B.J.; Hummels, C.C.M.

    2015-01-01

    This paper presents a work in progress design case that is used to exemplify how a phenomenology-inspired perspective on time can impact the design of highly interactive systems and products. The design presents a calendar with a re-orientated layout that is based on a bodily relationship with time,

  15. Allocation and Productivity of Time in New Ventures of Female and Male Entrepreneurs

    I. Verheul (Ingrid); M.A. Carree (Martin); A.R. Thurik (Roy)

    2007-01-01

    textabstractThis paper investigates time allocation decisions in new ventures of female and male entrepreneurs using a model that distinguishes between effects of preferences and productivity on the number of working hours. Using data of 1,158 entrepreneurs we find that the preference for work time

  16. Allocation and productivity of time in new ventures of female and male entrepreneurs

    I. Verheul (Ingrid); M.A. Carree (Martin); A.R. Thurik (Roy)

    2009-01-01

    textabstractThis paper investigates time allocation decisions in new ventures of female and male entrepreneurs using a model that distinguishes between effects of preferences and productivity on the number of working hours. Using data of 1,158 entrepreneurs we find that the preference for work time

  17. Is the travel time of private roads too short, too long, or just right?

    van den Berg, V.A.C.; Verhoef, E.T.

    2012-01-01

    We consider price and service-quality setting in oligopolistic markets for congestible services, applied to the case of private roads. Previous studies show that parallel competitors set a volume/capacity ratio (and thereby a travel time or service quality) that is socially optimal if they take the

  18. Analysis of the Main Factors Influencing Food Production in China Based on Time Series Trend Chart

    Shuangjin; WANG; Jianying; LI

    2014-01-01

    Based on the annual sample data on food production in China since the reform and opening up,we select 8 main factors influencing the total food production( growing area,application rate of chemical fertilizer,effective irrigation area,the affected area,total machinery power,food production cost index,food production price index,financial funds for supporting agriculture,farmers and countryside),and put them into categories of material input,resources and environment,and policy factors. Using the factor analysis,we carry out the multi-angle analysis of these typical influencing factors one by one through the time series trend chart. It is found that application rate of chemical fertilizer,the growing area of food crops and drought-affected area become the key factors affecting food production. On this basis,we set forth the corresponding recommendations for improving the comprehensive food production capacity.

  19. Pair production of Dirac particles in a d + 1-dimensional noncommutative space-time

    Ousmane Samary, Dine [Perimeter Institute for Theoretical Physics, Waterloo, ON (Canada); University of Abomey-Calavi, International Chair in Mathematical Physics and Applications (ICMPA-UNESCO Chair), Cotonou (Benin); N' Dolo, Emanonfi Elias; Hounkonnou, Mahouton Norbert [University of Abomey-Calavi, International Chair in Mathematical Physics and Applications (ICMPA-UNESCO Chair), Cotonou (Benin)

    2014-11-15

    This work addresses the computation of the probability of fermionic particle pair production in d + 1-dimensional noncommutative Moyal space. Using Seiberg-Witten maps, which establish relations between noncommutative and commutative field variables, up to the first order in the noncommutative parameter θ, we derive the probability density of vacuum-vacuum pair production of Dirac particles. The cases of constant electromagnetic, alternating time-dependent, and space-dependent electric fields are considered and discussed. (orig.)

  20. Household production and consumption over the life cycle: National Time Transfer Accounts in 14 European countries

    Lili Vargha

    2017-03-01

    Full Text Available Background: While the importance of unpaid household labour is recognised in total economic output, little is known about the demographics of household production and consumption. Objective: Our goal is to give a comprehensive estimation on the value of household production and its consumption by age and gender and analyse nonmarket economic transfers in 14 European countries based on publicly available harmonised data. Methods: We introduce a novel imputation method of harmonised European time use (HETUS data to the European Union Statistics on Income and Living Conditions (EU-SILC in order to assign time spent on home production to consumers in households and estimate time transfers. Moreover, monetary values are attributed to household production activities using data on earnings from the Structure of Earnings Survey (SES. Results: We show that the nonmarket economic life cycle of men differs from that of women. The gender gap in household production is not evenly distributed over the life cycle. Women of working age contribute the most in net terms, while the main beneficiaries of household goods and services are children and to a lesser extent adult men. These patterns are similar across countries, with variations in the gender- and age-specific levels of home production and consumption. Conclusions: In Europe, in the national economy, intergenerational flows are important in sustaining both childhood and old age. In contrast, in the household economy, intergenerational transfers flow mostly towards children. Contribution: We add a new focus to the research on household production: While keeping the gender aspect, we demonstrate the importance of the life cycle component in household production.

  1. Real-Time Tropospheric Product Establishment and Accuracy Assessment in China

    Chen, M.; Guo, J.; Wu, J.; Song, W.; Zhang, D.

    2018-04-01

    Tropospheric delay has always been an important issue in Global Navigation Satellite System (GNSS) processing. Empirical tropospheric delay models are difficult to simulate complex and volatile atmospheric environments, resulting in poor accuracy of the empirical model and difficulty in meeting precise positioning demand. In recent years, some scholars proposed to establish real-time tropospheric product by using real-time or near-real-time GNSS observations in a small region, and achieved some good results. This paper uses real-time observing data of 210 Chinese national GNSS reference stations to estimate the tropospheric delay, and establishes ZWD grid model in the country wide. In order to analyze the influence of tropospheric grid product on wide-area real-time PPP, this paper compares the method of taking ZWD grid product as a constraint with the model correction method. The results show that the ZWD grid product estimated based on the national reference stations can improve PPP accuracy and convergence speed. The accuracy in the north (N), east (E) and up (U) direction increase by 31.8 %,15.6 % and 38.3 %, respectively. As with the convergence speed, the accuracy of U direction experiences the most improvement.

  2. Body size and the timing of egg production in parasitoid wasps.

    Ellers, J.; Jervis, M.

    2003-01-01

    In insects several key fitness-related variables are positively correlated with intraspecific variation in body size, but little is known about size-related variation in the timing of egg production within species. Female insects are known to vary in the degree to which they concentrate egg

  3. RD networks and regional knowledge production in Europe : Evidence from a space-time model

    Wanzenböck, Iris; Piribauer, Philipp

    2018-01-01

    In this study we estimate space-time impacts of the embeddedness in R&D networks on regional knowledge production using a dynamic spatial panel data model with non-linear effects for 229 European NUTS 2 regions in the period 1998–2010. Embeddedness refers to the positioning in networks where nodes

  4. Supporting new science teachers in pursuing socially just science education

    Ruggirello, Rachel; Flohr, Linda

    2017-10-01

    This forum explores contradictions that arose within the partnership between Teach for America (TFA) and a university teacher education program. TFA is an alternate route teacher preparation program that places individuals into K-12 classrooms in low-income school districts after participating in an intense summer training program and provides them with ongoing support. This forum is a conversation about the challenges we faced as new science teachers in the TFA program and in the Peace Corps program. We both entered the teaching field with science degrees and very little formal education in science education. In these programs we worked in a community very different from the one we had experienced as students. These experiences allow us to address many of the issues that were discussed in the original paper, namely teaching in an unfamiliar community amid challenges that many teachers face in the first few years of teaching. We consider how these challenges may be amplified for teachers who come to teaching through an alternate route and may not have as much pedagogical training as a more traditional teacher education program provides. The forum expands on the ideas presented in the original paper to consider the importance of perspectives on socially just science education. There is often a disconnect between what is taught in teacher education programs and what teachers actually experience in urban classrooms and this can be amplified when the training received through alternate route provides a different framework as well. This forum urges universities and alternate route programs to continue to find ways to authentically partner using practical strategies that bring together the philosophies and goals of all stakeholders in order to better prepare teachers to partner with their students to achieve their science learning goals.

  5. Relaxation of ion energy spectrum just after turbulent heating pulse in TRIAM-1 tokamak

    Nakamura, Kazuo; Hiraki, Naoji; Nakamura, Yukio; Itoh, Satoshi

    1982-01-01

    The temporal evolution and spatial profile of the ion energy spectrum just after the application of a toroidal current pulse for turbulent heating are investigated experimentally in the TRIAM-1 tokamak and also numerically using the Fokker-Planck equation. The two-component ion energy spectrum formed by turbulent heating relaxes to a single one within tausub(i) (the ion collision time). (author)

  6. Productivity improvement: Implementation and analysis of clustering technique in manufacturing of timing gearbox cover

    Satbir Singh

    2016-04-01

    Full Text Available Productivity is an indicator of efficiency with which resources, both human and material, are transformed into useful services and goods. The vital purpose of the prevailing work was to analyze the factors involved in the improvement of productivity in all its types such as material, capital, labor, machine and total productivity at the plant. This was obtained by decreasing the manufacturing cost per component by reducing its cycle time and increasing the monthly production rate. The experimentation revealed that using proposed processes and improved tooling, monthly production rate has increased by 16.2% due to reduced cycle time, the number of defected components i.e. rejection rate has reduced up to 2%. A reduction of 6.78% in manufacturing cost per component was recorded. Tooling cost has reduced by more than 12%. Saving up to 50% in inspection cost has been recorded due to close dimensional tolerances and high surface finish achieved on components. An increase of 4.84% was recorded in total productivity.

  7. Effects of pollination timing and distance on seed production in a dioecious weed Silene latifolia

    Anderson, Jay F.; Duddu, Hema S. N.; Shirtliffe, Steven J.; Benaragama, Dilshan; Syrovy, Lena D.; Stanley, Katherine A.; Haile, Teketel A.

    2015-11-01

    Silene latifolia Poir. (white cockle or white campion) is an important invasive weed in North American agriculture. It exhibits dioecy, therefore, both male and female plants are required in order for seed production to occur. However, dioecious species being invasive is not common because of their limitations in pollination and subsequent seed production. The objective of this study is to determine the effect of pollination timing and distance on seed production of Silene latifolia. A series of experiments including pollination exclusion, timing and pollination distance were conducted in 2009 and 2010 at or around Saskatoon, Saskatchewan. For pollination exclusion, exclosures were built around the natural female plants for exclosure, sham-exclosure, and male and female combined treatments. Pollination timing was studied by applying exclosure, non-exclosure, night-exclosure, and day-exclosure treatments to individual female plants. Female plants were transplanted along a linear interval at six different distances from the pollen source to study the effect of pollination distance. S. latifolia was exclusively insect-pollinated and pollination occurred both day and night; however, in one year, pollination occurred mainly at night. Female plants that were in the range of 0-4 m from a compatible pollen source experienced no limitation to pollination. However, when the distance was increased further up to 128 m, pollination levels and subsequent seed production were declined. Moreover, there were differences in seed production between years suggesting that pollination was affected by the environmental conditions during pollination and the crop that white cockle was grown in. These experiments indicate that seed production in S. latifolia is limited by insect-pollination. Although there was pollination limitation for seed production at greater distances from a pollen source, the high fecundity rate (3000-18000 seeds per plant) resulted in a large seed output. Thus, we

  8. Time and temperature dependence of cascade induced defect production in in situ experiments and computer simulation

    Ishino, Shiori

    1993-01-01

    Understanding of the defect production and annihilation processes in a cascade is important in modelling of radiation damage for establishing irradiation correlation. In situ observation of heavy ion radiation damage has a great prospect in this respect. Time and temperature dependence of formation and annihilation of vacancy clusters in a cascade with a time resolution of 30 ms has been studied with a facility which comprises a heavy ion accelerator and an electron microscope. Formation and annihilation rates of defect clusters have been separately measured by this technique. The observed processes have been analysed by simple kinetic equations, taking into account the sink effect of surface and the defect clusters themselves together with the annihilation process due to thermal emission of vacancies from the defect clusters. Another tool to study time and temperature dependence of defect production in a cascade is computer simulation. Recent results of molecular dynamics calculations on the temperature dependence of cascade evolution are presented, including directional and temperature dependence of the lengths of replacement collision sequences, temperature dependence of the process to reach thermal equilibrium and so on. These results are discussed under general time frame of radiation damage evolution covering from 10 -15 to 10 9 s, and several important issues for the general understanding have been identified. (orig.)

  9. 23 CFR 751.15 - Just compensation.

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Just compensation. 751.15 Section 751.15 Highways... AND ACQUISITION § 751.15 Just compensation. (a) Just compensation shall be paid the owner for the... nonconforming junkyard as provided in § 751.11 must pertain at the time of the taking or removal in order to...

  10. Production Cells in Construction: Considering Time, Space and Information Linkages to Seek Broader Implementations

    Renato Nunes Mariz

    2013-01-01

    Full Text Available The use of production cells in manufacturing has achieved many benefits, motivating researchers to apply them in the construction environment. The aim of this research is to identify time, space, and information linkages in construction’s production cells applications, seeking opportunities for broader implementations. We adopted a literature review approach focusing on cases in the Brazilian construction sector that addressed cell applications. Subsequently, comparative tables of these publications were prepared, analyzing the consideration of time, space, and information linkages, as well as identified results. The article pointed out that there is a gap in publications that address the application of a production cell in almost all construction flows, except the job site flow, reflecting the tendency of most companies of applying lean concepts firstly in physical flows. By analyzing these aspects (group of features that enhance the use of the cell, it was found that “material flow and pull systems” and “operators interaction” were the aspects most often considered, but mostly partially. Few cases reported the use of “flexibility” and “equipment maintenance”. No case reported comprehensive considerations of the three important linkages of time, space, and information. Space was the linkage better considered compared to time and information linkages. Lead time reduction, cost savings and increased productivity were among the greatest benefits reported from the applications of production cells. There is also a positive correlation between the linkages coverage and the number of benefits obtained. Further research is suggested in order to investigate the results of a more comprehensive application considering all linkages.

  11. Multiclausal Utterances Aren't Just for Big Kids: A Framework for Analysis of Complex Syntax Production in Spoken Language of Preschool- and Early School-Age Children

    Arndt, Karen Barako; Schuele, C. Melanie

    2013-01-01

    Complex syntax production emerges shortly after the emergence of two-word combinations in oral language and continues to develop through the school-age years. This article defines a framework for the analysis of complex syntax in the spontaneous language of preschool- and early school-age children. The purpose of this article is to provide…

  12. Relative planting times on the production components in sesame/cowpea bean intercropping in organic system

    Afrânio César de Araújo

    2013-12-01

    Full Text Available Aiming at better land use, small farmers usually plant sesame and cowpea bean intercropped with other crops. The aim of this work was to analyze and quantify the influence of four relative planting times of the cowpea bean in intercropping with sesame from the standpoint of their production components, plant productivity and the index of land equivalent ratio (LER. The field experiment was conducted in a randomized blocks with four treatments and four replicates. The treatments were the sesame and the cowpea bean in intercropping with the cowpea bean planted at the same time, 7, 14 and 21days after than the sesame. A greater part of the production components of both the sesame as well the cowpea bean was affected by the intercropping and significant differences were noted among the treatments in a larger part of the parameters. As the planting of the cowpea bean became more distant from that of the sesame, the yield of the Pedaliaceae increased and the yield of the Fabaceae decreased. The results for LER findings on the other hand suggest that in the sesame/cowpea bean intercropping, when the Fabaceae is planted seven days after the sesame, there is better use of the land and a largest possibility to the producer earning a profit.

  13. Effects of Variable Production Rate and Time-Dependent Holding Cost for Complementary Products in Supply Chain Model

    Mitali Sarkar

    2017-01-01

    Full Text Available Recently, a major trend is going to redesign a production system by controlling or making variable the production rate within some fixed interval to maintain the optimal level. This strategy is more effective when the holding cost is time-dependent as it is interrelated with holding duration of products and rate of production. An effort is made to make a supply chain model (SCM to show the joint effect of variable production rate and time-varying holding cost for specific type of complementary products, where those products are made by two different manufacturers and a common retailer makes them bundle and sells bundles to end customers. Demand of each product is specified by stochastic reservation prices with a known potential market size. Those players of the SCM are considered with unequal power. Stackelberg game approach is employed to obtain global optimum solution of the model. An illustrative numerical example, graphical representation, and managerial insights are given to illustrate the model. Results prove that variable production rate and time-dependent holding cost save more than existing literature.

  14. ANALYZING THE POSTPONEMENT OF TIME PRODUCTION SYSTEMS IN MAKE-TO-STOCK AND SEASONAL DEMAND

    Paulo Cesar Chagas Rodrigues

    2011-12-01

    Full Text Available The supply chain management, postponement and demand management functions are of strategic importance to the economic success of organizations because they influence the production process, when viewed in isolation and empirically may hinder understanding of their behavior. The aim of this paper is to analyze the influence of the postponement in an enterprise production system with make-to-stock and with seasonal demand. The research method used was a case study, the instruments of data collection were semi-structured interviews, documentary analysis and site visits. This research is restricted to analysis of the influence that different levels of delay and the company's position in the supply chain have on the practice of demand management in the productive segment graphic, product spiral notebook and also in relation to geographical focus (region of the state São Paulo, in which it will seek to interview the managers and directors. As a way to support the research on the analysis of case study and the final considerations will be discussed the following issues: supply chain management, postponement, demand management and production system make-to-stock. The demand management can be understood as a practice that allows you to manage and coordinate the supply chain in reverse, i.e. the consumer to the supplier, in which consumers trigger actions for the supply of products can make the process more efficient. The purpose of managing the supply chain is able to allow the addition of value, exceeding the expectations of consumers, it is necessary to develop a relationship with suppliers and customers win-win. The postponement strategy must fit the characteristics of the turbulent environment within the markets along with demands that require variety of customized products and services and reasonable costs, aiming to support decision making. The postponement of time can be a way to soften the increase in inventory of finished product in the company

  15. Time-explicit methods for joint economical and geological risk mitigation in production optimization

    Christiansen, Lasse Hjuler; Capolei, Andrea; Jørgensen, John Bagterp

    2016-01-01

    Real-life applications of production optimization face challenges of risks related to unpredictable fluctuations in oil prices and sparse geological data. Consequently, operating companies are reluctant to adopt model-based production optimization into their operations. Conventional production...... of mitigating economical and geological risks. As opposed to conventional strategies that focus on a single long-term objective, TE methods seek to reduce risks and promote returns over the entire reservoir life by optimization of a given ensemble-based geological risk measure over time. By explicit involvement...... of time, economical risks are implicitly addressed by balancing short-term and long-term objectives throughout the reservoir life. Open-loop simulations of a two-phase synthetic reservoir demonstrate that TE methods may significantly improve short-term risk measures such as expected return, standard...

  16. Role of Weed Emergence Time for the Relative Seed Production in Maize

    Stefano Benvenuti

    2007-03-01

    Full Text Available Trials were carried out in 2000 and 2001 to investigate the effect of weed emergence time on weed seed production in a maize field. Datura stramonium L., Solanum nigrum L. and Abutilon theophrasti Medicus were selected for their importance as summer weeds. Emergence time was found to be crucial since delay would involve an unfavourable light environment determined by crop canopy elongation and resulting shade production. Only the early emergence of D. stramonium and A. theophrasti showed the capacity to exposing their leaves over the crop canopy. Generally the weed seed production under shade conditions decreased for the reduction of the fruit per plant since the number of seed per plant showed only a light reduction. However, while D. stramonium and A. theophrasti compete with the crop by increasing height, Solanum nigrum tends to adjust to shade without excessive reduction in number of seeds produced. Thus in D. stramonium and A. theophrasti late emergence reduced seed production to only 15%, while S. nigrum maintained 25% of the seed production level generally observed with greater light exposure. This environmental adaptation was confirmed by the less marked decrease in S. nigrum harvest index. Agroecological involvements are discussed.

  17. Role of Weed Emergence Time for the Relative Seed Production in Maize

    Stefano Benvenuti

    Full Text Available Trials were carried out in 2000 and 2001 to investigate the effect of weed emergence time on weed seed production in a maize field. Datura stramonium L., Solanum nigrum L. and Abutilon theophrasti Medicus were selected for their importance as summer weeds. Emergence time was found to be crucial since delay would involve an unfavourable light environment determined by crop canopy elongation and resulting shade production. Only the early emergence of D. stramonium and A. theophrasti showed the capacity to exposing their leaves over the crop canopy. Generally the weed seed production under shade conditions decreased for the reduction of the fruit per plant since the number of seed per plant showed only a light reduction. However, while D. stramonium and A. theophrasti compete with the crop by increasing height, Solanum nigrum tends to adjust to shade without excessive reduction in number of seeds produced. Thus in D. stramonium and A. theophrasti late emergence reduced seed production to only 15%, while S. nigrum maintained 25% of the seed production level generally observed with greater light exposure. This environmental adaptation was confirmed by the less marked decrease in S. nigrum harvest index. Agroecological involvements are discussed.

  18. Just-in-Time Teaching, Just-in-Need Learning: Designing towards Optimized Pedagogical Outcomes

    Killi, Steinar; Morrison, Andrew

    2015-01-01

    Teaching methods are constantly being changed, new ones are developed and old methods have undergone a renaissance. Two main approaches to teaching prevail: a) lecture-based and project-based and b) an argumentative approach to known knowledge or learning by exploration. Today, there is a balance between these two approaches, and they are more…

  19. EFFECT OF AGING TIME TOWARD CRYSTALLINITY OF PRODUCTS IN SYNTHESIS OF MESOPOROUS SILICATES MCM-41

    Suyanta Suyanta

    2010-12-01

    Full Text Available Researches about the effects of aging time toward crystallinity of products in the synthesis of mesoporous silicates MCM-41 have been done. MCM-41 was synthesized by hydrothermal treatment to the mixture of sodium silicate, sodium hydroxide, cetyltrimetylammoniumbromide (CTMAB and aquadest in the molar ratio of 8Na2SiO3 : CTMAB : NaOH : 400H2O. Hydrothermal treatment was carried out at 110 °C in a teflon-lined stainless steel autoclave heated in the oven, with variation of aging time, i.e.: 4, 8, 12, 16, 24, 36, 48, and 72 h respectively. The solid phase were filtered, then washed with deionised water, and dried in the oven at 100 °C for 2 h. The surfactant CTMAB was removed by calcinations at 550 °C for 10 h with heating rate 2 °C/min. The as-synthesized and calcined powders were characterized by using FTIR spectroscopy and X-ray diffraction method. The relative crystallinity of products was evaluated based on the intensity of d100 peaks. The best product was characterized by using N2 physisorption method in order to determine the specific surface area, mean pore diameter, lattice parameter, and pore walls thickness. It was concluded that the relative crystallinity of the products was sensitively influenced by the aging time. The highest relative crystallinity was achieved when used 36 h of aging time in hydrothermal treatment. In this optimum condition the product has 946.607 m2g-1 of specific surface area, 3.357 nm of mean pore diameter, 4.533 nm of lattice parameter, and 1.176 nm of pore walls thickness.

  20. Molecular quantification of lactic acid bacteria in fermented milk products using real-time quantitative PCR.

    Furet, Jean-Pierre; Quénée, Pascal; Tailliez, Patrick

    2004-12-15

    Real-time quantitative PCR assays were developed for the absolute quantification of lactic acid bacteria (LAB) (Streptococcus thermophilus, Lactobacillus delbrueckii, L. casei, L. paracasei, L. rhamnosus, L. acidophilus and L. johnsonii) in fermented milk products. The results of molecular quantification and classic bacterial enumeration did not differ significantly with respect to S. thermophilus and the species of the L. casei group which were detected in the six commercial fermented products tested, thus showing that DNA extraction was efficient and that genomic DNA solutions were free of PCR inhibitors. For L. delbrueckii, the results of bacterial enumeration were generally lower by a factor 10 to 100 than those of PCR quantification, suggesting a loss of viability during storage of the dairy products at 1-8 degrees C for most of the strains in this species. Real-time quantitative assays enabled identification of the species of lactic acid bacterial strains initially present in commercial fermented milk products and their accurate quantification with a detection threshold of 10(3) cells per ml of product.

  1. Influence of capacity- and time-constrained intermediate storage in two-stage food production systems

    Akkerman, Renzo; van Donk, Dirk Pieter; Gaalman, Gerard

    2007-01-01

    In food processing, two-stage production systems with a batch processor in the first stage and packaging lines in the second stage are common and mostly separated by capacity- and time-constrained intermediate storage. This combination of constraints is common in practice, but the literature hardly...... of systems like this. Contrary to the common sense in operations management, the LPT rule is able to maximize the total production volume per day. Furthermore, we show that adding one tank has considerable effects. Finally, we conclude that the optimal setup frequency for batches in the first stage...... pays any attention to this. In this paper, we show how various capacity and time constraints influence the performance of a specific two-stage system. We study the effects of several basic scheduling and sequencing rules in the presence of these constraints in order to learn the characteristics...

  2. A queer anxiety: assimilation politics and cinematic hedonics in Relax . . . It's Just Sex.

    Bennett, Jeff

    2006-01-01

    This essay explores the commodification of queer identities in independent cinema, offering particular attention to P. J. Castellaneta's 1998 film, Relax . . . It's Just Sex. Like many contemporary queer independent productions, Relax is ensnared in a representational cinematic hedonics, aspiring to sustain a traditional gay and lesbian politics and simultaneously produce pleasure for multiple audiences. While Relax attempts to position itself as a queer film that resists normative conceptions of sexuality, the feature inadvertently appropriates more essentialized understandings of identity closely aligned to liberation rhetoric.

  3. Investigation of the Time Evolution and Species Production in a 2-Dimensional Packed Bed Reactor

    Engeling, Kenneth; Kruszelnicki, Juliusz; Kushner, Mark; Foster, John

    2016-09-01

    Plasma production in microporous media has potential to enable a number of technologies ranging from flameless combustion to environmental hazard mitigation addressing air borne pollutants. Packed bed reactors (PBRs) is one such technology that relies on plasma production in microporous media. The physics of plasma production and transport in such media however remains poorly understood. In order to better understand the plasma propagation and plasma driven chemical reaction within microporous media, absorption spectroscopy and time-resolved imaging diagnostics are being utilized. We report on plasma driven species formation and plasma discharge spatial structure and evolution characteristics found in the 2-dimensional representation of a PBR. Work supported by US DOE Office of Fusion Energy Science and the National Science Foundation.

  4. Delay times between harvesting or collection of food products and consumption for use in radiological assessments

    Jones, A L; Sherwood, J C

    2009-01-01

    From a radiological protection point of view, the inclusion of delay times when carrying out assessments of dose from consumption of foods should be considered. A review of delay times has been carried out to update a report published in 1983, to take account of changes and modernisations in industrial food processes, together with changes in diet and popularity of different foods in the United Kingdom. The new review considered more foods and data for existing foods have been reconsidered to check whether manufacturing processes or procedures have changed the shelf-life of any products. For some foods there have been changes made to the recommended delay times because of changes in manufacture or handling of the fresh foodstuff. A discussion is also included on the appropriate use of delay times in dose assessments.

  5. Secondary analysis of a marketing research database reveals patterns in dairy product purchases over time.

    Van Wave, Timothy W; Decker, Michael

    2003-04-01

    Development of a method using marketing research data to assess food purchase behavior and consequent nutrient availability for purposes of nutrition surveillance, evaluation of intervention effects, and epidemiologic studies of diet-health relationships. Data collected on household food purchases accrued over a 13-week period were selected by using Universal Product Code numbers and household characteristics from a marketing research database. Universal Product Code numbers for 39,408 dairy product purchases were linked to a standard reference for food composition to estimate the nutrient content of foods purchased over time. Two thousand one hundred sixty-one households located in Victoria, Texas, and surrounding communities who were active members of a frequent shopper program. Demographic characteristics of sample households and the nutrient content of their dairy product purchases were analyzed using frequency distribution, cross tabulation, analysis of variance, and t test procedures. A method for using marketing research data was successfully used to estimate household purchases of specific foods and their nutrient content from a marketing database containing hundreds of thousands of records. Distribution of dairy product purchases and their concomitant nutrients between Hispanic and non-Hispanic households were significant (P<.01, P<.001, respectively) and sustained over time. Purchase records from large, nationally representative panels of shoppers, such as those maintained by major market research companies, might be used to accomplish detailed longitudinal epidemiologic studies or surveillance of national food- and nutrient-purchasing patterns within and between countries and segments of their respective populations.

  6. Relating lab to life: Decrements in attention over time predict math productivity among children with ADHD.

    Fosco, Whitney D; Hawk, Larry W

    2017-02-01

    A child's ability to sustain attention over time (AOT) is critical in attention-deficit/hyperactivity disorder (ADHD), yet no prior work has examined the extent to which a child's decrement in AOT on laboratory tasks relates to clinically-relevant behavior. The goal of this study is to provide initial evidence for the criterion validity of laboratory assessments of AOT. A total of 20 children with ADHD (7-12 years of age) who were enrolled in a summer treatment program completed two lab attention tasks (a continuous performance task and a self-paced choice discrimination task) and math seatwork. Analyses focused on relations between attention task parameters and math productivity. Individual differences in overall attention (OA) measures (averaged across time) accounted for 23% of the variance in math productivity, supporting the criterion validity of lab measures of attention. The criterion validity was enhanced by consideration of changes in AOT. Performance on all laboratory attention measures deteriorated as time-on-task increased, and individual differences in the decrement in AOT accounted for 40% of the variance in math productivity. The only variable to uniquely predict math productivity was from the self-paced choice discrimination task. This study suggests that attention tasks in the lab do predict a clinically-relevant target behavior in children with ADHD, supporting their use as a means to study attention processes in a controlled environment. Furthermore, this prediction is improved when attention is examined as a function of time-on-task and when the attentional demands are consistent between lab and life contexts.

  7. Time series from hyperion to track productivity in pivot agriculture in saudi arabia

    Houborg, Rasmus

    2017-12-13

    The hyperspectral satellite sensing capacity is expected to increase substantially in the near future with the planned deployment of hyperspectral systems by both space agencies and commercial companies. These enhanced observational resources will offer new and improved ways to monitor the dynamics and characteristics of terrestrial ecosystems. This study investigates the utility of time series of hyperspectral imagery, acquired by Hyperion onboard EO-1, for quantifying variations in canopy chlorophyll (Chlc), plant productivity, and yield over an intensive farming area in the desert of Saudi Arabia. Chlc is estimated on the basis of predictive multi-variate empirical models established via a machine learning approach using a training dataset of in-situ measured target variables and explanatory hyperspectral indices. Resulting time series of Chlc are translated into Gross Primary Productivity (GPP) and Yield based on semi-empirical relationships, and evaluated against ground-based observations. Results indicate significant benefit in utilizing the full suite of hyperspectral indices over multi-spectral indices constructible from Landsat-8 and Sentinel-2.

  8. Time series from hyperion to track productivity in pivot agriculture in saudi arabia

    Houborg, Rasmus; McCabe, Matthew; Angel, Yoseline; Middleton, Elizabeth M.

    2017-01-01

    The hyperspectral satellite sensing capacity is expected to increase substantially in the near future with the planned deployment of hyperspectral systems by both space agencies and commercial companies. These enhanced observational resources will offer new and improved ways to monitor the dynamics and characteristics of terrestrial ecosystems. This study investigates the utility of time series of hyperspectral imagery, acquired by Hyperion onboard EO-1, for quantifying variations in canopy chlorophyll (Chlc), plant productivity, and yield over an intensive farming area in the desert of Saudi Arabia. Chlc is estimated on the basis of predictive multi-variate empirical models established via a machine learning approach using a training dataset of in-situ measured target variables and explanatory hyperspectral indices. Resulting time series of Chlc are translated into Gross Primary Productivity (GPP) and Yield based on semi-empirical relationships, and evaluated against ground-based observations. Results indicate significant benefit in utilizing the full suite of hyperspectral indices over multi-spectral indices constructible from Landsat-8 and Sentinel-2.

  9. Exact and Heuristic Solutions to Minimize Total Waiting Time in the Blood Products Distribution Problem

    Amir Salehipour

    2012-01-01

    Full Text Available This paper presents a novel application of operations research to support decision making in blood distribution management. The rapid and dynamic increasing demand, criticality of the product, storage, handling, and distribution requirements, and the different geographical locations of hospitals and medical centers have made blood distribution a complex and important problem. In this study, a real blood distribution problem containing 24 hospitals was tackled by the authors, and an exact approach was presented. The objective of the problem is to distribute blood and its products among hospitals and medical centers such that the total waiting time of those requiring the product is minimized. Following the exact solution, a hybrid heuristic algorithm is proposed. Computational experiments showed the optimal solutions could be obtained for medium size instances, while for larger instances the proposed hybrid heuristic is very competitive.

  10. Crowd science : it is not just a matter of time (or funding)

    Vasileiadou, E.

    2015-01-01

    Citizen science, or crowd science, or volunteer science, has increased in the last 4–5 years, with an accompanying increase in the literature. The main argument in such literature is that citizen science has many advantages, not only for scientists and the science that is produced, but also for the

  11. From Just War to Nuclear Pacifism: The Evolution of U.S. Christian Thinking about War in the Nuclear Age, 1946–1989

    Stephen R. Rock

    2018-05-01

    Full Text Available During the Cold War, two basic schools of thought emerged among U.S. Christian leaders and ethicists concerning the implications of the nuclear revolution for the use of force by the United States. The just war thinkers held that nuclear war could in fact be conducted within the bounds of traditional just war principles, particularly those of discrimination and proportionality. Since nuclear weapons could be used in war, it followed that they could and should be developed and produced for that purpose and for the purpose of deterrence. The nuclear pacifists held that nuclear war could not be conducted within the confines of traditional just war principles. Since by its nature nuclear war could not be moral, there was no reason for the development and production of nuclear weapons, except for the purpose of deterrence. And since nuclear deterrence required one to make threats of nuclear destruction that it would not be moral to carry out, and, moreover, carried unacceptable risks of miscalculation and inadvertent or accidental use of nuclear weapons, deterrence itself could not be justified, except perhaps as a temporary way station on the path to nuclear disarmament. Although the just war thinkers initially held sway, over time they became less dominant. By the middle of the 1980s, the U.S. Catholic Church and most of the largest Mainline Protestant denominations had formally adopted a nuclear pacifist position. This essay chronicles the victory of nuclear pacifism in these churches, explains it as a reaction to the nuclear weapons and doctrine advocated by the just war thinkers, and implemented by the U.S. government and military, as well as other events and trends in American society, and inquires as to whether or not the just war thinkers and nuclear pacifists influenced the course of U.S. policy.

  12. Monitoring Volatile Organic Compounds (VOCs) in real-time on oil and natural gas production sites

    Lupardus, R.; Franklin, S. B.

    2017-12-01

    Oil and Natural Gas (O&NG) development, production, infrastructure, and associated processing activities can be a substantial source of air pollution, yet relevant data and real-time quantification methods are lacking. In the current study, O&NG fugitive emissions of Volatile Organic Compounds (VOCs) were quantified in real-time and used to determine the spatial and temporal windows of exposure for proximate flora and fauna. Eleven O&NG sites on the Pawnee National Grassland in Northeastern Colorado were randomly selected and grouped according to production along with 13 control sites from three geographical locations. At each site, samples were collected 25 m from the wellhead in NE, SE, and W directions. In each direction, two samples were collected with a Gasmet DX4040 gas analyzer every hour from 8:00 am to 2:00 pm (6 hours total), July to October, 2016 (N=864). VOC concentrations generally increased during the 6 hr. day with the exception of N2O and were predominately the result of O&NG production and not vehicle exhaust. Thirteen of 24 VOCs had significantly different levels between production groups, frequently above reference standards and at biologically relevant levels for flora and fauna. The most biologically relevant VOCs, found at concentrations exceeding time weighted average permissible exposure limits (TWA PELs), were benzene and acrolein. Generalized Estimating Equations (GEEs) measured the relative quality of statistical models predicting benzene concentrations on sites. The data not only confirms that O&NG emissions are impacting the region, but also that this influence is present at all sites, including controls. Increased real-time VOC monitoring on O&NG sites is required to identify and contain fugitive emissions and to protect human and environmental health.

  13. Crowd science : it is not just a matter of time (or funding)

    Vasileiadou, E.

    2014-01-01

    The last years, citizen science, or crowd science, has increased tremendously, both in number of projects, and number of participants. Most literature on crowd science focuses on its advantages, for both scientists, and the participating citizens. The challenges of crowd science come mainly from

  14. Coproduct and star product in field theories on Lie-algebra noncommutative space-times

    Amelino-Camelia, Giovanni; Arzano, Michele

    2002-01-01

    We propose a new approach to field theory on κ-Minkowski noncommutative space-time, a popular example of Lie-algebra space-time. Our proposal is essentially based on the introduction of a star product, a technique which is proving to be very fruitful in analogous studies of canonical noncommutative space-times, such as the ones recently found to play a role in the description of certain string-theory backgrounds. We find to be incorrect the expectation, previously reported in the literature, that the lack of symmetry of the κ-Poincare coproduct should lead to interaction vertices that are not symmetric under exchanges of the momenta of identical particles entering the relevant processes. We show that in κ-Minkowski the coproduct and the star product must indeed treat momenta in a nonsymmetric way, but the overall structure of interaction vertices is symmetric under exchange of identical particles. We also show that in κ-Minkowski field theories it is convenient to introduce the concepts of 'planar' and 'nonplanar' Feynman loop diagrams, again in close analogy with the corresponding concepts previously introduced in the study of field theories in canonical noncommutative space-times

  15. Time-dependent radiolytic product concentrations in the water flow of a spinning wheel target

    Burns, W.G.; Goodall, J.A.B.

    1989-01-01

    Using the Harwell Facsimile computer simulation package, values of water radiolytic product concentrations, for both transient radicals and stable molecules were calculated for a single revolution of the cooling water at 75 0 C in a spallation neutron source target wheel irradiated with 1000 MeV protons and consequential secondary radiation. The radiation was pulsed except for part of the γ radiation, which was continuous. The stable product concentrations at first rose and eventually came to steady values before the end of the revolution. Comparison with results for steady radiation suggested that with the mixed radiation molecular products from the more densely ionizing radiation were largely destroyed by the radicals from the more lightly ionizing radiation. The distribution of the dose rate in time and space also tended to give a lower extent of radiolysis than calculated for uniform irradiation at the arithmetic mean dose rate. The effect of a second revolution on the diluted products showed a smaller increase in product concentrations than for the first revolution. The Authors consider that the extent of radiolysis should be manageable. (author)

  16. Anticoagulant Effect of Sugammadex: Just an In Vitro Artifact.

    Dirkmann, Daniel; Britten, Martin W; Pauling, Henning; Weidle, Juliane; Volbracht, Lothar; Görlinger, Klaus; Peters, Jürgen

    2016-06-01

    Sugammadex prolongs activated partial thromboplastin time (aPTT) and prothrombin time (PT) suggestive of anticoagulant effects. To pinpoint its presumed anticoagulant site of action, the authors assessed Sugammadex's impact on a panel of coagulation assays. Sugammadex, Rocuronium, Sugammadex and Rocuronium combined, or saline were added to blood samples from healthy volunteers and analyzed using plasmatic (i.e., aPTT, thrombin time, and fibrinogen concentration) (n = 8 each), PT (quick), activities of plasmatic coagulation factors, and whole blood (extrinsically and intrinsically activated thromboelastometry) assays (n = 18 each). Furthermore, dose-dependent effects of Sugammadex were also assessed (n = 18 each) in diluted Russel viper venom time (DRVVT) assays with low (DRVVT1) and high (DRVVT2) phospholipid concentrations and in a highly phospholipid-sensitive aPTT assay. Sugammadex increased PT (+9.1%; P Sugammadex dose-dependently prolonged both DRVVT1 and the highly phospholipid-sensitive aPTT assays, but additional phospholipids in the DRVVT2 assay almost abolished these prolongations. Thrombin time, a thromboelastometric thrombin generation assay, clot firmness, clot lysis, fibrinogen concentration, and activities of other coagulation factors were unaltered. Rocuronium, Sugammadex and Rocuronium combined, and saline exerted no effects. Sugammadex significantly affects various coagulation assays, but this is explainable by an apparent phospholipid-binding effect, suggesting that Sugammadex`s anticoagulant effects are likely an in vitro artifact.

  17. Time-invariant PT product and phase locking in PT -symmetric lattice models

    Joglekar, Yogesh N.; Onanga, Franck Assogba; Harter, Andrew K.

    2018-01-01

    Over the past decade, non-Hermitian, PT -symmetric Hamiltonians have been investigated as candidates for both a fundamental, unitary, quantum theory and open systems with a nonunitary time evolution. In this paper, we investigate the implications of the former approach in the context of the latter. Motivated by the invariance of the PT (inner) product under time evolution, we discuss the dynamics of wave-function phases in a wide range of PT -symmetric lattice models. In particular, we numerically show that, starting with a random initial state, a universal, gain-site location dependent locking between wave-function phases at adjacent sites occurs in the PT -symmetry-broken region. Our results pave the way towards understanding the physically observable implications of time invariants in the nonunitary dynamics produced by PT -symmetric Hamiltonians.

  18. Impaired temporal, not just spatial, resolution in amblyopia.

    Spang, Karoline; Fahle, Manfred

    2009-11-01

    In amblyopia, neuronal deficits deteriorate spatial vision including visual acuity, possibly because of a lack of use-dependent fine-tuning of afferents to the visual cortex during infancy; but temporal processing may deteriorate as well. Temporal, rather than spatial, resolution was investigated in patients with amblyopia by means of a task based on time-defined figure-ground segregation. Patients had to indicate the quadrant of the visual field where a purely time-defined square appeared. The results showed a clear decrease in temporal resolution of patients' amblyopic eyes compared with the dominant eyes in this task. The extent of this decrease in figure-ground segregation based on time of motion onset only loosely correlated with the decrease in spatial resolution and spanned a smaller range than did the spatial loss. Control experiments with artificially induced blur in normal observers confirmed that the decrease in temporal resolution was not simply due to the acuity loss. Amblyopia not only decreases spatial resolution, but also temporal factors such as time-based figure-ground segregation, even at high stimulus contrasts. This finding suggests that the realm of neuronal processes that may be disturbed in amblyopia is larger than originally thought.

  19. Does a Belief in a "Just World" Affect Health Care Providers' Reactions to Perinatal Illness?

    Clyman, Ronald I.; And Others

    1980-01-01

    A test was used to assess the degree to which pediatricians and nurses specializing in perinatal care believe in a just world in which good is rewarded and evil is punished. Results indicate that the cause of some perinatal problems are more likely to be attributed to parents by health providers with a greater belief in a just world. (JMD)

  20. Paralinguistic mechanisms of production in human "beatboxing": a real-time magnetic resonance imaging study.

    Proctor, Michael; Bresch, Erik; Byrd, Dani; Nayak, Krishna; Narayanan, Shrikanth

    2013-02-01

    Real-time magnetic resonance imaging (rtMRI) was used to examine mechanisms of sound production by an American male beatbox artist. rtMRI was found to be a useful modality with which to study this form of sound production, providing a global dynamic view of the midsagittal vocal tract at frame rates sufficient to observe the movement and coordination of critical articulators. The subject's repertoire included percussion elements generated using a wide range of articulatory and airstream mechanisms. Many of the same mechanisms observed in human speech production were exploited for musical effect, including patterns of articulation that do not occur in the phonologies of the artist's native languages: ejectives and clicks. The data offer insights into the paralinguistic use of phonetic primitives and the ways in which they are coordinated in this style of musical performance. A unified formalism for describing both musical and phonetic dimensions of human vocal percussion performance is proposed. Audio and video data illustrating production and orchestration of beatboxing sound effects are provided in a companion annotated corpus.

  1. The mevalonate pathway in neurons: It's not just about cholesterol.

    Moutinho, Miguel; Nunes, Maria João; Rodrigues, Elsa

    2017-11-01

    Cholesterol homeostasis greatly impacts neuronal function due to the essential role of this sterol in the brain. The mevalonate (MVA) pathway leads to the synthesis of cholesterol, but also supplies cells with many other intermediary molecules crucial for neuronal function. Compelling evidence point to a model in which neurons shutdown cholesterol synthesis, and rely on a shuttle derived from astrocytes to meet their cholesterol needs. Nevertheless, several reports suggest that neurons maintain the MVA pathway active, even with sustained cholesterol supply by astrocytes. Hence, in this review we focus not on cholesterol production, but rather on the role of the MVA pathway in the synthesis of particular intermediaries, namely isoprenoids, and on their role on neuronal function. Isoprenoids act as anchors for membrane association, after being covalently bound to proteins, such as most of the small guanosine triphosphate-binding proteins, which are critical to neuronal cell function. Based on literature, on our own results, and on the analysis of public transcriptomics databases, we raise the idea that in neurons there is a shift of the MVA pathway towards the non-sterol branch, responsible for isoprenoid synthesis, in detriment to post-squalene branch, and that this is ultimately essential for synaptic activity. Nevertheless new tools that facilitate imaging and the biochemical characterization and quantification of the prenylome in neurons and astrocytes are needed to understand the regulation of isoprenoid production and protein prenylation in the brain, and to analyze its differences on diverse physiological or pathological conditions, such as aging and neurodegenerative states. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. U.S. Department Of Energy's nuclear engineering education research: highlights of recent and current research-III. 4. Early Detection of Plant Equipment Failures: A Case Study in Just-In-Time Maintenance

    Parlos, Alexander G.; Kim, Kyusung; Bharadwaj, Raj M.

    2001-01-01

    Approximately 60% of all incipient electric motor failures is attributed to mechanical and electromechanical causes, whereas 33% of all motor failures is attributed to faults related to motor winding insulation. There has been much research reported on the detection and diagnosis of incipient motor failures. The most widely accepted approach for detection of mechanical failures is vibration monitoring, whereas motor current monitoring is used for electromechanical faults such as broken rotor bars and end-rings. In this paper, the development and testing of a model-based fault detection system for electric motors is briefly presented. In particular, the presented fault detection system has been developed using only motor nameplate information. Furthermore, the fault detection results presented utilize only motor voltage and current sensor information, minimizing the need for expensive or intrusive sensors. In this study, dynamic recurrent neural networks are used to predict the input-output response of a three-phase induction motor while using an estimate of the motor speed signal. Accurate state filtering of the motor speed using only electrical measurements is feasible, and it has been demonstrated in other recent publications. The developed input-output motor model requires no knowledge of the motor specifics; rather, only motor nameplate information is used. The resulting model appears very effective in accurately predicting the dynamic behavior of the nonlinear motor system to varying supply unbalance and load levels. The motor model is then used to generate the residuals needed in the fault diagnosis system. Following the residual generation step, fault detection must be pursued by appropriately processing the residuals. It is common to first extract features characteristic of the faults being investigated prior to attempting fault detection. In this study, multi-resolution (or wavelet) signal-processing techniques are used in combination with more traditional

  3. TIME MANAGEMENT AND ITS IMPLEMENTATION AT PRODUCTION COMPANIES

    Yurii Safonov

    2017-11-01

    Full Text Available The purpose and objectives. Time management is still not a very popular element in many enterprises, while its implementation significantly increases staff productivity and, ultimately, the effectiveness of the company. For this reason, the purpose of the article is to promote time management in a business environment by providing specific tools, principles, methods and systems, and to show its importance to the company and describe the influence of time management for the enterprise. Methods. The study used a generalization, systematization, empirical research, systematic and logical approach to the development of theoretical and methodological provisions for instrumental support management performance of the industrial enterprise. Results. Time management is one of the most important strategic tools of the modern manager. It can help both existing companies and companies that are just launched (the project. Practical implications. The current goal of time management as a mechanism to improve the efficiency of the company. Value/originality. To implement it, the company offered a popular time management system, allowing the company to increase the effectiveness of its activities.

  4. Farnesol signalling in Candida albicans - more than just communication.

    Polke, Melanie; Leonhardt, Ines; Kurzai, Oliver; Jacobsen, Ilse D

    2018-03-01

    Candida albicans is a successful colonizer of the human host, which can, under certain circumstances cause a range of clinically diverse infections. Important virulence-associated traits of the fungus, such as the dimorphic switch and biofilm formation, are controlled by the quorum sensing molecule farnesol. Given the potential of farnesol as a novel antifungal drug, there has been increasing research into the mechanism underlying farnesol sensing and action in C. albicans. However, despite the identification of various factors involved in farnesol signalling, its exact mode of action remains largely unclear. This review provides an overview of the currently known aspects of farnesol production, sensing and action within C. albicans. We also illustrate the characteristic of C. albicans to simultaneously produce and tolerate high farnesol concentrations that are lethal to other microbes. Furthermore, we summarize new literature on the role of farnesol in the interaction of C. albicans with the human host and highlight its action as a potent immunomodulatory molecule.

  5. "Everyone just ate good food": 'Good food' in Islamabad, Pakistan.

    Hasnain, Saher

    2018-08-01

    In recent years, consumption of alternatively produced foods has increased in popularity in response to the deleterious effects of rapidly globalising and industrialised food systems. Concerns over food safety in relation to these changes may result from elevated levels of risk and changing perceptions associated with food production practices. This paper explores how the middle class residents of Islamabad, Pakistan, use the concept of 'good food' to reconnect themselves with nature, changing food systems, and traditional values. The paper also demonstrates how these ideas relate to those of organic, local, and traditional food consumption as currently used in more economically developed states in the Global North. Through research based on participant observation and semi-structured interviews, this paper illustrates that besides price and convenience, purity, freshness, association with specific places, and 'Pakistani-ness' were considered as the basis for making decisions about 'good food'. The results show that while individuals are aware of and have some access to imported organic and local food, they prefer using holistic and culturally informed concepts of 'good food' instead that reconnect them with food systems. I argue that through conceptualisations of 'good food', the urban middle class in Islamabad is reducing their disconnection and dis-embeddedness from nature, the food systems, and their social identities. The paper contributes to literature on food anxieties, reconnections in food geography, and 'good food' perceptions, with a focus on Pakistan. Copyright © 2018. Published by Elsevier Ltd.

  6. Pollination increases ethylene production in Lilium hybrida cv. Brindisi flowers but does not affect the time to tepal senescence or tepal abscission.

    Pacifici, Silvia; Prisa, Domenico; Burchi, Gianluca; van Doorn, Wouter G

    2015-01-15

    In many species, pollination induces a rapid increase in ethylene production, which induces early petal senescence, petal abscission, or flower closure. Cross-pollination in Lilium hybrida cv. Brindisi resulted in a small increase in flower ethylene production. In intact plants and in isolated flowers, pollination had no effect on the time to tepal senescence or tepal abscission. When applied to closed buds of unpollinated flowers, exogenous ethylene slightly hastened the time to tepal senescence and abscission. However, exogenous ethylene had no effect when the flowers had just opened, i.e. at the time of pollination. Experiments with silver thiosulphate, which blocks the ethylene receptor, indicated that endogenous ethylene had a slight effect on the regulation of tepal senescence and tepal abscission, although only at the time the tepals were still inside buds and not in open flowers. Low ethylene-sensitivity after anthesis therefore explains why pollination had no effect on the processes studied. Copyright © 2014 Elsevier GmbH. All rights reserved.

  7. Animal DNA identification in food products and animal feed by real time polymerase chain reaction method

    Людмила Мар’янівна Іщенко

    2016-11-01

    Full Text Available Approbation of diagnostic tests for species identification of beef, pork and chicken by real time polymerase chain reaction method was done. Meat food, including heat treated and animal feed, was used for research. The fact of inconsistencies was revealed for product composition of some meat products that is marked by manufacturer 

  8. "Moral Realism" and Justness in War in Gregory of Tours'"Historia Francorum".

    Reynolds, Burnam W.

    1982-01-01

    Examines how the concept of justness influenced the conduct of wars in the early Middle Ages. The author offers a new interpretation of Gregory of Tours' perspective on war as found in his "Historia Francorum." (AM)

  9. Dental caries - not just holes in teeth! A perspective.

    Bowen, W H

    2016-06-01

    Cavitation in teeth results from a pathogenic process termed dental caries that has occurred on the tooth surface for weeks or even years. Accumulation of dental plaque (biofilm) on the tooth is usually the first manifestation of the disease. Although acid production is the immediate and proximal cause of dissolution of teeth; it is the milieu within which the acid is formed that should be of primary concern. Focusing on the 'critical pH' has detracted attention from the more biological aspects (biofilm formation) of dental caries. Dental caries is unique; it is a biological process occurring on essentially an inert surface. Investigation of the multitude of interactions occurring in plaque ranging from enamel interfaces to surfaces of bacteria and matrices poses challenges worthy of the best scientific minds. The mouth clearly offers unique opportunities to investigate the multi facets of biofilm formation in vivo, generating data that have relevance way beyond the mouth. Prevention of this ubiquitous disease, dental caries, continues to present serious challenges. The public health benefits of fluoride delivered in its various formats are well recognized. Nevertheless, additional preventive approaches are required. Overcoming the rapid clearance of agents from the mouth is particularly challenging. Building on the polymerizing capacity of glucosyltransferases it may be possible to incorporate a therapeutic agent into the matrix plaque, thereby delivering therapeutic agents precisely to where they are needed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  10. Effect of cycle time on polyhydroxybutyrate (PHB) production in aerobic mixed cultures.

    Ozdemir, Sebnem; Akman, Dilek; Cirik, Kevser; Cinar, Ozer

    2014-03-01

    The aim of this study was to investigate the effect of cycle time on polyhydroxybutyrate (PHB) production under aerobic dynamic feeding system. The acetate-fed feast and famine sequencing batch reactor was used to enrich PHB accumulating microorganism. Sequencing batch reactor (SBR) was operated in four different cycle times (12, 8, 4, and 2 h) fed with a synthetic wastewater. The system performance was determined by monitoring total dissolved organic carbon, dissolved oxygen, oxidation-reduction potential, and PHB concentration. In this study, under steady-state conditions, the feast period of the SBR was found to allow the PHB storage while a certain part of stored PHB was used for continued growth in famine period. The percentage PHB storages by aerobic microorganism were at 16, 18, 42, and 55% for the 12, 8, 4, and 2-h cycle times, respectively. The PHB storage was increased as the length of the cycle time was decreased, and the ratio of the feast compared to the total cycle length was increased from around 13 to 33% for the 12 and 2-h cycle times, respectively.

  11. The impact of product configurators on lead times in engineering-oriented companies

    Haug, Anders; Hvam, Lars; Mortensen, Niels Henrik

    2011-01-01

    This paper presents a study of how the use of product configurators affects business processes of engineering-oriented companies. A literature study shows that only a minor part of product configuration research deals with the effects of product configuration, and that the ones that do are mostly...... vague when reporting the effects of configurator projects. Only six cases were identified, which provide estimates of the actual size of lead time reduction achieved from product configurators. To broaden this knowledge, this paper presents the results of a study of 14 companies concerning the impact...

  12. THE JUST DRUG DISTRIBUTION IN THE PERSPECTIVE OF WELFARE STATE

    Aktieva Tri Tjitrawati

    2014-03-01

    Full Text Available States have obligations to improve equitability of welfare and prosperity of the community. Pharmaceutical is one of the important and strategic industries because of its vital role to support the development of health sector. Lack of regulation on pricing-products, and diversion of social aspects in the drugs trade, either by government or industry, are associated with the paradigm that underlies regulation of the distributions. Prospective policy analysis and functional approach of law are used to find a level of balance of various interest related to the subject, and to find concepts as a basis to construct new paradigm on drugs distribution. Negara berkewajiban untuk meningkatkan kesejahteraan dan kemakmuran masyarakat secara berkeadilan. Industri farmasi merupakan salah satu industri penting dan strategis karena perannya yang vital menunjang pembangunan bidang kesehatan.Terdapat kecenderungan kurangnya peran Pemerintah dalam pricing policy obat, serta diabaikannya aspek sosial dalam perdagangan produk farmasi, baik oleh Pemerintah maupun industri farmasi. Carut marut ini berkaitan dengan ketidakjelasan paradigma yang berujung pada ketidakjelasan kebijakan yang melandasi tatanan distribusi obat. Makalah ini menggunakan analisis kebijakan prospektif dan pendekatan fungsional hukum untuk mengkaji kebijakan distribusi obat yang bersifat multi disiplin dan menemukan konsep baru untuk menemukan titik keseimbangan dari berbagai kepentingan terkait.

  13. Evolution of a Corporate Knowledge Management and Knowledge Building Effort: A Case Study of Just-In-Time Training and Support of Laboratory Robotic Workstations Driven Through Online Community Portals

    Karen Kearns

    2005-10-01

    Full Text Available This is a case study of the evolution of how a successful knowledge management initiative was achieved in a corporate learning organization. The initiative was centered on providing training tools and documentation of automated laboratory workstations that are utilized by scientists in a drug discovery environment. The case study will address the software tools, processes for content building, and the organizational dynamics that either assisted or blocked the progression of the initiative. Over a four-year period three distinct efforts were implemented, each differed in the particular software tools and focus of the initiatives. This presentation will compare and contrast the elements that provided barriers to success in the first two initiatives and the mechanisms and focus used in the third initiative that proved successful, scalable, and sustainable.

  14. Time management strategies for research productivity.

    Chase, Jo-Ana D; Topp, Robert; Smith, Carol E; Cohen, Marlene Z; Fahrenwald, Nancy; Zerwic, Julie J; Benefield, Lazelle E; Anderson, Cindy M; Conn, Vicki S

    2013-02-01

    Researchers function in a complex environment and carry multiple role responsibilities. This environment is prone to various distractions that can derail productivity and decrease efficiency. Effective time management allows researchers to maintain focus on their work, contributing to research productivity. Thus, improving time management skills is essential to developing and sustaining a successful program of research. This article presents time management strategies addressing behaviors surrounding time assessment, planning, and monitoring. Herein, the Western Journal of Nursing Research editorial board recommends strategies to enhance time management, including setting realistic goals, prioritizing, and optimizing planning. Involving a team, problem-solving barriers, and early management of potential distractions can facilitate maintaining focus on a research program. Continually evaluating the effectiveness of time management strategies allows researchers to identify areas of improvement and recognize progress.

  15. Detecting subsurface fluid leaks in real-time using injection and production rates

    Singh, Harpreet; Huerta, Nicolas J.

    2017-12-01

    CO2 injection into geologic formations for either enhanced oil recovery or carbon storage introduces a risk for undesired fluid leakage into overlying groundwater or to the surface. Despite decades of subsurface CO2 production and injection, the technologies and methods for detecting CO2 leaks are still costly and prone to large uncertainties. This is especially true for pressure-based monitoring methods, which require the use of simplified geological and reservoir flow models to simulate the pressure behavior as well as background noise affecting pressure measurements. In this study, we propose a method to detect the time and volume of fluid leakage based on real-time measurements of well injection and production rates. The approach utilizes analogies between fluid flow and capacitance-resistance modeling. Unlike other leak detection methods (e.g. pressure-based), the proposed method does not require geological and reservoir flow models to simulate the behavior that often carry significant sources of uncertainty; therefore, with our approach the leak can be detected with greater certainty. The method can be applied to detect when a leak begins by tracking a departure in fluid production rate from the expected pattern. The method has been tuned to detect the effect of boundary conditions and fluid compressibility on leakage. To highlight the utility of this approach we use our method to detect leaks for two scenarios. The first scenario simulates a fluid leak from the storage formation into an above-zone monitoring interval. The second scenario simulates intra-reservoir migration between two compartments. We illustrate this method to detect fluid leakage in three different reservoirs with varying levels of geological and structural complexity. The proposed leakage detection method has three novelties: i) requires only readily-available data (injection and production rates), ii) accounts for fluid compressibility and boundary effects, and iii) in addition to

  16. Remote just-in-time telementored trauma ultrasound: a double-factorial randomized controlled trial examining fluid detection and remote knobology control through an ultrasound graphic user interface display.

    Kirkpatrick, Andrew W; McKee, Ian; McKee, Jessica L; Ma, Irene; McBeth, Paul B; Roberts, Derek J; Wurster, Charles L; Parfitt, Robbie; Ball, Chad G; Oberg, Scott; Sevcik, William; Hamilton, Douglas R

    2016-05-01

    Remote-telementored ultrasound involves novice examiners being remotely guided by experts using informatic-technologies. However, requiring a novice to perform ultrasound is a cognitively demanding task exacerbated by unfamiliarity with ultrasound-machine controls. We incorporated a randomized evaluation of using remote control of the ultrasound functionality (knobology) within a study in which the images generated by distant naive examiners were viewed on an ultrasound graphic user interface (GUI) display viewed on laptop computers by mentors in different cities. Fire-fighters in Edmonton (101) were remotely mentored from Calgary (n = 65), Nanaimo (n = 19), and Memphis (n = 17) to examine an ultrasound phantom randomized to contain free fluid or not. Remote mentors (2 surgeons, 1 internist, and 1 ED physician) were randomly assigned to use GUI knobology control during mentoring (GUIK+/GUIK-). Remote-telementored ultrasound was feasible in all cases. Overall accuracy for fluid detection was 97% (confidence interval = 91 to 99%) with 3 false negatives (FNs). Positive/negative likelihood ratios were infinity/0.0625. One FN occurred with the GUIK+ and 2 without (GUIK-). There were no statistical test performance differences in either group (GUIK+ and GUIK-). Ultrasound-naive 1st responders can be remotely mentored with high accuracy, although providing basic remote control of the knobology did not affect outcomes. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. ICD-11 Gaming Disorder: Needed and just in time or dangerous and much too early? Commentary on: Scholars' open debate paper on the World Health Organization ICD-11 Gaming Disorder proposal (Aarseth et al.)

    van den Brink, Wim

    2017-01-01

    In their debate contribution, Aarseth et al. (2016) strongly argue against the proposal of WHO ICD-11 (International Classification of Diseases, 11th revision) to include Gaming Disorder as a new diagnostic category emphasizing the fact that no consensus exists on the definition and the risk that

  18. Time Biases in laser ranging measurements; impacts on geodetic products (Reference Frame and Orbitography)

    Belli, A.; Exertier, P.; Lemoine, F. G.; Chinn, D. S.; Zelensky, N. P.

    2017-12-01

    The GGOS objectives are to maintain a geodetic network with an accuracy of 1 mm and a stability of 0.1 mm per year. For years, the laser ranging technique, which provide very accurate absolute distances to geodetic targets enable to determine the scale factor as well as coordinates of the geocenter. In order to achieve this goal, systematic errors appearing in the laser ranging measurements must be considered and solved. In addition to Range Bias (RB), which is the primary source of uncertainty of the technique, Time Bias (TB) has been recently detected by using the Time Transfer by Laser Link (T2L2) space instrument capability on-board the satellite Jason-2. Instead of determining TB through the precise orbit determination that is applied to commonly used geodetic targets like LAGEOS to estimate global geodetic products, we have developed, independently, a dedicated method to transfer time between remote satellite laser ranging stations. As a result, the evolving clock phase shift to UTC of around 30 stations has been determined under the form of time series of time bias per station from 2008 to 2016 with an accuracy of 3-4 ns. It demonstrated the difficulty, in terms of Time & Frequency used technologies, to locally maintain accuracy and long term stability at least in the range of 100 ns that is the current requirement for time measurements (UTC) for the laser ranging technique. Because some laser ranging stations oftently exceed this limit (from 100 ns to a few μs) we have been studying these effects first on the precision orbit determination itself, second on the station positioning. We discuss the impact of TB on LAGEOS and Jason-2 orbits, which appears to affect the along-track component essentially. We also investigate the role of TB in global geodetic parameters as the station coordinates. Finally, we propose to provide the community with time series of time bias of laser ranging stations, under the form of a data- handling-file in order to be included in

  19. Fast, Just-in-Time Queries on Heterogeneous Raw Data

    CERN. Geneva

    2017-01-01

    Today’s scientific and business processes heavily depend on fast and accurate data analysis. Data scientists are routinely overwhelmed by the effort needed to manage the volumes of data produced. As general-purpose data management software is often inefficient, hard to manage, or too generic to serve today's applications, businesses increasingly turn to specialised data management software, which can only handle one data format, and then resort to data integration solutions. With the exponential growth of dataset size and complexity, however, data format-specific solutions no longer scale for efficient analysis, thereby slowing down the cycle of analysing and understanding the data, and making decisions. I will illustrate the different nature of problems we face when managing heterogeneous datasets, and how these translate to fundamental challenges for the data management community. Then I will introduce new technologies inspired by these challenges, which overturn long-stangding assumptions, enable meaning...

  20. Just-in-time patents and the development of standards

    Kang, B.; Bekkers, R.

    2015-01-01

    Modern technical standards often include large numbers of patented technologies that are required to implement those standards. These “standard-essential patents” are very valuable assets, and firms that do not own such patents are prepared to spend billions of dollars purchasing them. Whereas large

  1. Analysis of phosphatidylcholine oxidation products in human plasma using quadrupole time-of flight mass spectrometry

    Adachi, Junko; Asano, Migiwa; Yoshioka, Naoki; Nushida, Hideyuki; Ueno, Yasuhiro

    2006-01-01

    We report here an application of the previous method for the analysis ofphosphatidylcholine (PC) and lysophosphatidylcholine (lysoPC) oxidation products inhuman plasma using quadrupole time of flight (Q-TOF) mass spectrometry withelectrospray ionization. We separated these products using an HPLC C8 column witha gradient of methanol and 10 mM aqueous ammonium acetate. Monohydroperoxides,epoxyhydroxy derivatives, oxo derivatives, and trihydroxides of palmitoyl-linoleoyl(C16:0/C18:2) PC and stea...

  2. Age-related slowing of response selection and production in a visual choice reaction time task

    David L Woods

    2015-04-01

    Full Text Available Aging is associated with delayed processing in choice reaction time (CRT tasks, but the processing stages most impacted by aging have not been clearly identified. Here, we analyzed CRT latencies in a computerized serial visual feature-conjunction task. Participants responded to a target letter (probability 40% by pressing one mouse button, and responded to distractor letters differing either in color, shape, or both features from the target (probabilities 20% each, by pressing the other mouse button. Stimuli were presented randomly to the left and right visual fields and stimulus onset asynchronies (SOAs were adaptively reduced following correct responses using a staircase procedure. In Experiment 1, we tested 1466 participants who ranged in age from 18 to 65 years. CRT latencies increased significantly with age (r = 0.47, 2.80 ms/year. Central processing time (CPT, isolated by subtracting simple reaction times (obtained in a companion experiment performed on the same day from CRT latencies, accounted for more than 80% of age-related CRT slowing, with most of the remaining increase in latency due to slowed motor responses. Participants were faster and more accurate when the stimulus location was spatially compatible with the mouse button used for responding, and this effect increased slightly with age. Participants took longer to respond to distractors with target color or shape than to distractors with no target features. However, the additional time needed to discriminate the more target-like distractors did not increase with age. In Experiment 2, we replicated the findings of Experiment 1 in a second population of 178 participants (ages 18-82 years. CRT latencies did not differ significantly in the two experiments, and similar effects of age, distractor similarity, and stimulus-response spatial compatibility were found. The results suggest that the age-related slowing in visual CRT latencies is largely due to delays in response selection and

  3. Ion energy spectrum just after the application of current pulse for turbulent heating in the TRIAM-1 tokamak

    Nakamura, Kazuo; Nakamura, Yukio; Hiraki, Naoji; Itoh, Satoshi

    1981-01-01

    Temporal evolution and spatial profile of ion energy spectrum just after the application of current pulse for turbulent heating are investigated experimentally in TRIAM-1 and numerically with a Fokker-Planck equation. Two-component ion energy spectrum formed by turbulent heating relaxes to single one within tau sub(i) (ion collision time). (author)

  4. Ion energy spectrum just after the application of current pulse for turbulent heating in the TRIAM-1 tokamak

    Nakamura, K; Nakamura, Y; Hiraki, N; Itoh, S [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1981-07-01

    Temporal evolution and spatial profile of ion energy spectrum just after the application of current pulse for turbulent heating are investigated experimentally in TRIAM-1 and numerically with a Fokker-Planck equation. Two-component ion energy spectrum formed by turbulent heating relaxes to single one within tau sub(i) (ion collision time).

  5. Operation JUST CAUSE: Foreshadowing Example of Joint Vision 2010 Concepts in Practice

    Haight, David

    1998-01-01

    .... While this is true, JUST CAUSE clearly provides us a unique window in which to view a likely, contemporary scenario for deliberate planning and execution of contingency operations in less developed nations...

  6. DAST in Flight just after Structural Failure of Right Wing

    1980-01-01

    conducting in-flight experiments from a remote ground site. DAST explored the technology required to build wing structures with less than normal stiffness. This was done because stiffness requires structural weight but ensures freedom from flutter-an uncontrolled, divergent oscillation of the structure, driven by aerodynamic forces and resulting in structural failure. The program used refined theoretical tools to predict at what speed flutter would occur. It then designed a high-response control system to counteract the motion and permit a much lighter wing structure. The wing had, in effect, 'electronic stiffness.' Flight research with this concept was extremely hazardous because an error in either the flutter prediction or control system implementation would result in wing structural failure and the loss of the vehicle. Because of this, flight demonstration of a sub-scale vehicle made sense from the standpoint of both safety and cost. The program anticipated structural failure during the course of the flight research. The Firebee II was a supersonic drone selected as the DAST testbed because its wing could be easily replaced, it used only tail-mounted control surfaces, and it was available as surplus from the U. S. Air Force. It was capable of 5-g turns (that is, turns producing acceleration equal to 5 times that of gravity). Langley outfitted a drone with an aeroelastic, supercritical research wing suitable for a Mach 0.98 cruise transport with a predicted flutter speed of Mach 0.95 at an altitude of 25,000 feet. Dryden and Langley, in conjunction with Boeing, designed and fabricated a digital flutter suppression system (FSS). Dryden developed an RPRV (remotely piloted research vehicle) flight control system; integrated the wing, FSS, and vehicle systems; and conducted the flight program. In addition to a digital flight control system and aeroelastic wings, each DAST drone had research equipment mounted in its nose and a mid-air retrieval system in its tail. The drones

  7. Worker's perceptions of time, time-use-attitudes and productivity

    E. Ben-Baruch

    1991-06-01

    Full Text Available Decreasing productivity and increasing wage demands are singled out as being crucial problems facing the economy of South Africa. Changes in the time perceptions and time-use-attitudes of workers could play a decisive role in increasing productivity. The relationships between time perception, needs, motivation and productivity are analysed. Culture, tradition, economy, and environment lend a specific significance to these variables. Workers in a technological society should be guided to adapt to and live by the value system needed to uphold productivity. Opsomming Voortdurende afnemende produktiwiteit teenoor looneise wat styg, is een van die kritieke probleme waarmee die Suid-Afrikaanse ekonomie gekonfronteer word. Die verandering van werkers se tydpersepsie en verandering van houdinge teenoor die benutting van tyd kan deurslaggewend in die verhoging van produktiwiteit wees. In die lig hiervan is die verwantskap tussen tydpersepsie, behoeftes, motivering en prodrktiwiteit ondersoek. In die ontleding word aandag geskenk aan die invloed wat kultuur, tradisie, ekonomie en die omgewing op hierdie veranderlikes het. Opieiding in 'n tegnologiese samelewmg behoort daarop gerig te wees om 'n waardesisteem by werkers te laat ontwikkel wat produktiwiteit kan bevorder.

  8. Innovation and construction management in Brazil: Challenges of companies in times of quality and productivity

    Barbosa, A. A. R.; Vilnītis, M.

    2017-10-01

    Considering the efforts to optimize productivity and quality in the construction through the potential existing in the respective companies, this study presents an approach for identification, management and priorities of improvements actions at construction sites focusing status on productivity, added value and innovation in the socioeconomic context and scenario of construction industry in Brazil. Technological advances in recent years have made the Brazilian construction industry gradually incorporate technologies and forms of management, despite its traditionally conservative character. In current days, the innovations are pursued with the quest for greater quality, productivity, safety and customer satisfaction, which have been increasingly competitive and global. Construction in Brazil occupies an important role in the economy, directly contributing to GDP and acting on an extensive productive chain of suppliers, commercialization services and maintenance. The Brazilian construction sector has undergone major changes in recent years, facilitated by factors such as the resumption of public investments, the creation of laws that facilitate real estate, investments and funding of external resources, and the efforts of the Brazilian Quality and Productivity Program - PBQP H. However, the sector faces problems of a lack of skilled labour to meet the growth needs of the sector. There are still problems and challenges of quality and productivity that prevent full sector development. The aspects of nonconformity, low quality, high tax burden, outsourcing and informality of the workforce have not been adequately addressed and resolved. Through the use of indicators of productivity and growth, the challenges of the Brazilian construction industry are discussed and the possible paths for the sector that allow its full development and to reduce the distance between the Brazilian construction industry and that of the developed countries.

  9. Relations between transit time, fermentation products, and hydrogen consuming flora in healthy humans.

    El Oufir, L; Flourié, B; Bruley des Varannes, S; Barry, J L; Cloarec, D; Bornet, F; Galmiche, J P

    1996-06-01

    To investigate whether transit time could influence H2 consuming flora and certain indices of colonic bacterial fermentation. Eight healthy volunteers (four methane excretors and four non-methane excretors) were studied for three, three week periods during which they received a controlled diet alone (control period), and then the same diet with cisapride or loperamide. At the end of each period, mean transit time (MTT) was estimated, an H2 lactulose breath test was performed, and stools were analysed. In the control period, transit time was inversely related to faecal weight, sulphate reducing bacteria counts, concentrations of total short chain fatty acids (SCFAs), propionic and butyric acids, and H2 excreted in breath after lactulose ingestion. Conversely, transit time was positively related to faecal pH and tended to be related to methanogen counts. Methanogenic bacteria counts were inversely related to those of sulphate reducing bacteria and methane excretors had slower MTT and lower sulphate reducing bacteria counts than non-methane excretors. Compared with the control period, MTT was significantly shortened (p < 0.05) by cisapride and prolonged (p < 0.05) by loperamide (73 (11) hours, 47 (5) hours and 147 (12) hours for control, cisapride, and loperamide, respectively, mean (SD)). Cisapride reduced transit time was associated with (a) a significant rise in faecal weight, sulphate reducing bacteria, concentrations of total SCFAs, and propionic and butyric acids and breath H2 as well as (b) a significant fall in faecal pH and breath CH4 excretion, and (c) a non-significant decrease in the counts of methanogenic bacteria. Reverse relations were roughly the same during the loperamide period including a significant rise in the counts of methanogenic bacteria and a significant fall in those of sulphate reducing bacteria. Transit time differences between healthy volunteers are associated with differences in H2 consuming flora and certain indices of colonic

  10. The space-time operator product expansion in string theory duals of field theories

    Aharony, Ofer; Komargodski, Zohar

    2008-01-01

    We study the operator product expansion (OPE) limit of correlation functions in field theories which possess string theory duals, from the point of view of the string worldsheet. We show how the interesting ('single-trace') terms in the OPE of the field theory arise in this limit from the OPE of the worldsheet theory of the string dual, using a dominant saddle point which appears in computations of worldsheet correlation functions in the space-time OPE limit. The worldsheet OPE generically contains only non-physical operators, but all the non-physical contributions are resummed by the saddle point to a contribution similar to that of a physical operator, which exactly matches the field theory expectations. We verify that the OPE limit of the worldsheet theory does not have any other contributions to the OPE limit of space-time correlation functions. Our discussion is completely general and applies to any local field theory (conformal at high energies) that has a weakly coupled string theory dual (with arbitrary curvature). As a first application, we compare our results to a proposal of R. Gopakumar for the string theory dual of free gauge theories

  11. Time Spent in Home Production Activities by Married Couples and Single Adults with Children.

    Douthitt, Robin A.

    1988-01-01

    A study found that, over time, married women employed full time have not decreased the time spent working in the home. Married men with young children have increased the time spent on home work. Single parents' time most closely resembled that of married women. (JOW)

  12. Time Series Analysis of Energy Production and Associated Landscape Fragmentation in the Eagle Ford Shale Play

    Pierre, Jon Paul; Young, Michael H.; Wolaver, Brad D.; Andrews, John R.; Breton, Caroline L.

    2017-11-01

    Spatio-temporal trends in infrastructure footprints, energy production, and landscape alteration were assessed for the Eagle Ford Shale of Texas. The period of analysis was over four 2-year periods (2006-2014). Analyses used high-resolution imagery, as well as pipeline data to map EF infrastructure. Landscape conditions from 2006 were used as baseline. Results indicate that infrastructure footprints varied from 94.5 km2 in 2008 to 225.0 km2 in 2014. By 2014, decreased land-use intensities (ratio of land alteration to energy production) were noted play-wide. Core-area alteration by period was highest (3331.6 km2) in 2008 at the onset of play development, and increased from 582.3 to 3913.9 km2 by 2014, though substantial revegetation of localized core areas was observed throughout the study (i.e., alteration improved in some areas and worsened in others). Land-use intensity in the eastern portion of the play was consistently lower than that in the western portion, while core alteration remained relatively constant east to west. Land alteration from pipeline construction was 65 km2 for all time periods, except in 2010 when alteration was recorded at 47 km2. Percent of total alteration from well-pad construction increased from 27.3% in 2008 to 71.5% in 2014. The average number of wells per pad across all 27 counties increased from 1.15 to 1.7. This study presents a framework for mapping landscape alteration from oil and gas infrastructure development. However, the framework could be applied to other energy development programs, such as wind or solar fields, or any other regional infrastructure development program.

  13. Economic feasibility of biogas production in swine farms using time series analysis

    Felipe Luis Rockenbach

    2016-07-01

    Full Text Available ABSTRACT: This study aimed to measure the economic feasibility and the time needed to return capital invested for the installation of a swine manure treatment system, these values originated the sale of carbon credits and/or of compensation of electric energy in swine farms, using the Box-Jenkins forecast models. It was found that the use of biogas is a viable option in a large scale with machines that operate daily for 10h or more, being the return period between 70 to 80 months. Time series analysis models are important to anticipate the series under study behavior, providing the swine breeder/investor means to reduce the financial investment risk as well as helping to decrease the production costs. Moreover, this process can be seen as another source of income and enable the breeder to be self-sufficient in the continuous supply of electric energy, which is very valuable nowadays considering that breeders are now increasingly using various technologies.

  14. Big data driven cycle time parallel prediction for production planning in wafer manufacturing

    Wang, Junliang; Yang, Jungang; Zhang, Jie; Wang, Xiaoxi; Zhang, Wenjun Chris

    2018-07-01

    Cycle time forecasting (CTF) is one of the most crucial issues for production planning to keep high delivery reliability in semiconductor wafer fabrication systems (SWFS). This paper proposes a novel data-intensive cycle time (CT) prediction system with parallel computing to rapidly forecast the CT of wafer lots with large datasets. First, a density peak based radial basis function network (DP-RBFN) is designed to forecast the CT with the diverse and agglomerative CT data. Second, the network learning method based on a clustering technique is proposed to determine the density peak. Third, a parallel computing approach for network training is proposed in order to speed up the training process with large scaled CT data. Finally, an experiment with respect to SWFS is presented, which demonstrates that the proposed CTF system can not only speed up the training process of the model but also outperform the radial basis function network, the back-propagation-network and multivariate regression methodology based CTF methods in terms of the mean absolute deviation and standard deviation.

  15. Applying the Lean principles of the Toyota Production System to reduce wait times in the emergency department.

    Ng, David; Vail, Gord; Thomas, Sophia; Schmidt, Nicki

    2010-01-01

    In recognition of patient wait times, and deteriorating patient and staff satisfaction, we set out to improve these measures in our emergency department (ED) without adding any new funding or beds. In 2005 all staff in the ED at Hôtel-Dieu Grace Hospital began a transformation, employing Toyota Lean manufacturing principles to improve ED wait times and quality of care. Lean techniques such as value-stream mapping, just-in-time delivery techniques, workplace organization, reduction of systemic wastes, use of the worker as the source of quality improvement and ongoing refinement of our process steps formed the basis of our project. Our ED has achieved major improvements in departmental flow without adding any additional ED or inpatient beds. The mean registration to physician time has decreased from 111 minutes to 78 minutes. The number of patients who left without being seen has decreased from 7.1% to 4.3%. The length of stay (LOS) for discharged patients has decreased from a mean of 3.6 to 2.8 hours, with the largest decrease seen in our patients triaged at levels 4 or 5 using the Canadian Emergency Department Triage and Acuity Scale. We noted an improvement in ED patient satisfaction scores following the implementation of Lean principles. Lean manufacturing principles can improve the flow of patients through the ED, resulting in greater patient satisfaction along with reduced time spent by the patient in the ED.

  16. Monitoring of industrial products, in the key market of security in modern times

    Martinez-Val, J. M.; Valcarcel, M.; Rodriguez Herrerias, J.

    2015-01-01

    The paper presents the European Union methodology for keeping a high level of safety standards of industrial products in the general market, while fostering the dynamics of such market. It includes the explanation of how this methodology is applied in Spain particularly through the campaigns of the Ministry of Industry with the assistance of Foundation F2I2. (Author)

  17. Just Spring

    Konda, Madhusudhan

    2011-01-01

    Get a concise introduction to Spring, the increasingly popular open source framework for building lightweight enterprise applications on the Java platform. This example-driven book for Java developers delves into the framework's basic features, as well as advanced concepts such as containers. You'll learn how Spring makes Java Messaging Service easier to work with, and how its support for Hibernate helps you work with data persistence and retrieval. Throughout Just Spring, you'll get your hands deep into sample code, beginning with a problem that illustrates dependency injection, Spring's co

  18. Not just pretty pictures: Geographical Information Systems in TB ...

    Geographical Information Systems (GIS) is becoming a useful tool in disease control by health planners. However little is known about its potential in tuberculosis (TB) control. In 2000 the National TB Programme (NTP) in Malawi assessed its usefulness. Routinely collected case-finding data from the 3 previous years (1997 ...

  19. Just a tool? : Implementing the Vulnerability Index in New Orleans

    Sanderijn Cels; Jorrit de Jong

    2011-01-01

    On an early morning in the beginning of 2008, outreach-workers woke up homeless people who were sleeping at a camp site in New Orleans. They asked them to participate in a medical assessment, called “The Vulnerability Index”.

  20. Just a fad? Gamification in health and fitness apps.

    Lister, Cameron; West, Joshua H; Cannon, Ben; Sax, Tyler; Brodegard, David

    2014-08-04

    Gamification has been a predominant focus of the health app industry in recent years. However, to our knowledge, there has yet to be a review of gamification elements in relation to health behavior constructs, or insight into the true proliferation of gamification in health apps. The objective of this study was to identify the extent to which gamification is used in health apps, and analyze gamification of health and fitness apps as a potential component of influence on a consumer's health behavior. An analysis of health and fitness apps related to physical activity and diet was conducted among apps in the Apple App Store in the winter of 2014. This analysis reviewed a sample of 132 apps for the 10 effective game elements, the 6 core components of health gamification, and 13 core health behavior constructs. A regression analysis was conducted in order to measure the correlation between health behavior constructs, gamification components, and effective game elements. This review of the most popular apps showed widespread use of gamification principles, but low adherence to any professional guidelines or industry standard. Regression analysis showed that game elements were associated with gamification (Pgamification (Pgamification was only associated with composite motivational behavior scores (Pgamification use in health and fitness apps, and the potential to impact health behavior. The results show that use of gamification in health and fitness apps has become immensely popular, as evidenced by the number of apps found in the Apple App Store containing at least some components of gamification. This shows a lack of integrating important elements of behavioral theory from the app industry, which can potentially impact the efficacy of gamification apps to change behavior. Apps represent a very promising, burgeoning market and landscape in which to disseminate health behavior change interventions. Initial results show an abundant use of gamification in health and

  1. Critical Disability Studies and Socially Just Change in Higher Education

    Liasidou, Anastasia

    2014-01-01

    Social justice is an ambiguous and contested term that is evoked in order to address issues of enhancing participation and eliminating discrimination across various markers of difference linked to race, social class, and so on. Historically, disability has been excluded from these analyses because it has been cast in the sphere of abnormality and…

  2. The "B" in EBD Is Not Just for Bullying

    Kauffman, James M.

    2015-01-01

    Problems in defining emotional and behavioural difficulties of all types, including bullying, are discussed. Interactions among seeing, naming and communicating about these phenomena are considered. School and community characteristics of students with emotional and behavioural difficulties are touched upon. Major problems in definition and…

  3. More than just fields: Reframing deagrarianisation in landscapes and livelihoods

    Hebinck, Paul; Mtati, Nosiseko; Shackleton, Charlie

    2018-01-01

    This paper discusses the emergent properties of deagrarianisation processes in two villages in the central Eastern Cape, South Africa. The claim of is that much of the deagrarianisation literature and debate does not acknowledge the importance of landscapes and the interaction between their

  4. The application of just administrative action in the South African ...

    This may inevitably infringe the right of the developer to, inter alia, administrative justice. It is argued in this article that the developer has certain constitutional rights which can be invoked when dealing with environmental authorities. Hence, the discussion in this article focuses on the relationship between administrative ...

  5. Digital Learning in California's K-12 Schools. Just the Facts

    Gao, Niu

    2015-01-01

    This fact page briefly discusses the following facts on digital learning in California's K-12: (1) As California implements new tests in its K-12 schools, technology infrastructure is a key concern; (2) Many districts are confident that they had enough bandwidth for online field tests; (3) Digital learning will require significantly greater…

  6. More than just T₄: diagnostic testing for hyperthyroidism in cats.

    Peterson, Mark E

    2013-09-01

    In older cats presenting with clinical features of hyperthyroidism, confirmation of a diagnosis of thyroid disease is usually straightforward. However, the potential for false-negative and false-positive results exists with all thyroid function tests (especially in the context of routine screening of asymptomatic cats) and leads to clinical dilemmas. For example, a high serum T₄ value may be found in a cat that lacks clinical signs of hyperthyroidism, or hyperthyroidism may be suspected in a cat with normal total T₄ concentrations. To avoid unnecessary treatment and potentially adverse effects in a euthyroid cat, thyroid function tests must always be interpreted in the light of the cat's history, clinical signs, physical examination findings and other laboratory findings. In this article the author reviews the use of commonly recommended thyroid function tests, focusing on clinical scenarios that present diagnostic difficulties. In doing so, he draws on the veterinary and comparative literature, his own clinical experience, and data, unpublished to date, obtained from a series of 100 hyperthyroid cats consecutively diagnosed at his clinic.

  7. Thriving, not just surviving, in emotionally demanding fields of practice.

    Wendt, Sarah; Tuckey, Michelle R; Prosser, Brenton

    2011-05-01

    Research within the disciplines of Social Work and Education has for sometime acknowledged the tragedy, trauma, conflict and misery that can be experienced by workers in their associated professions. More recently, there has been an aligned interest in the role of passion, emotion and energy in sustaining these professionals through such experiences. This paper contributes to the growing literature in this area by reporting on a study conducted with five social workers and six teachers who work in Australian lower socioeconomic, urban-fringe and communities. It also engages the concept of the 'personal domain' to explore how these social workers and teachers cannot only survive, but can actually thrive in demanding work contexts. The methodology adopted for the study was an appreciative enquiry approach, where these professionals, each with over a decade of experience in urban-fringe communities, were recruited via non-probability, purposive, snowballing techniques and interviewed about what sustained them in their work during November 2008-February 2009. Thematic analysis of the interviews found that participants not only identified specific survival strategies, but could also articulate how their life experiences, ideologies, beliefs, values and other life resources informed their work in ways that aided their flourishing as professionals. The paper concludes by calling for further research into the work of social work and teaching professionals from a 'personal domain' perspective and considering the potential implications of such research for these professions, particularly in terms of promoting professional trajectories characterised first by endurance, and then by development and triumph. © 2011 Blackwell Publishing Ltd.

  8. Just a Fad? Gamification in Health and Fitness Apps

    2014-01-01

    Background Gamification has been a predominant focus of the health app industry in recent years. However, to our knowledge, there has yet to be a review of gamification elements in relation to health behavior constructs, or insight into the true proliferation of gamification in health apps. Objective The objective of this study was to identify the extent to which gamification is used in health apps, and analyze gamification of health and fitness apps as a potential component of influence on a consumer’s health behavior. Methods An analysis of health and fitness apps related to physical activity and diet was conducted among apps in the Apple App Store in the winter of 2014. This analysis reviewed a sample of 132 apps for the 10 effective game elements, the 6 core components of health gamification, and 13 core health behavior constructs. A regression analysis was conducted in order to measure the correlation between health behavior constructs, gamification components, and effective game elements. Results This review of the most popular apps showed widespread use of gamification principles, but low adherence to any professional guidelines or industry standard. Regression analysis showed that game elements were associated with gamification (P<.001). Behavioral theory was associated with gamification (P<.05), but not game elements, and upon further analysis gamification was only associated with composite motivational behavior scores (P<.001), and not capacity or opportunity/trigger. Conclusions This research, to our knowledge, represents the first comprehensive review of gamification use in health and fitness apps, and the potential to impact health behavior. The results show that use of gamification in health and fitness apps has become immensely popular, as evidenced by the number of apps found in the Apple App Store containing at least some components of gamification. This shows a lack of integrating important elements of behavioral theory from the app industry

  9. [Saliva: more than just a factor in oral health].

    van Nieuw Ameronpn, A; Veerman, E C I; Brand, H S; Vissink, A

    2006-05-01

    Several salivary proteins are involved in the antimicrobial defence within the oral cavity, and are able to eliminate or inhibit a great number of microorganisms that enter the body via the oral cavity. Thus changes in the composition of saliva may not only affect people's oral health, but also have consequences for their general health. Based on salivary proteins, antimicrobial peptides have been synthesized. Potentially, these could be used as a new class of antibiotics. The antimicrobial peptides are hardly cytotoxic to human cells and do not evoke any or only very little resistence in microorganisms.

  10. Just follow your nose: homing by olfactory cues in ants.

    Steck, Kathrin

    2012-04-01

    How is an ant-equipped with a brain that barely exceeds the size of a pinhead-capable of achieving navigational marvels? Even though evidences suggest that navigation is a multimodal process, ants heavily depend on olfactory cues-of pheromonal and non-pheromonal nature-for foraging and orientation. Recent studies have directed their attention to the efficiency of pheromone trail networks. Advances in neurophysiological techniques make it possible to investigate trail pheromone processing in the ant's brain. In addition to relying on pheromone odours, ants also make use of volatiles emanating from the nest surroundings. Deposited in the vicinity of the nest, these home-range markings help the ants to home after a foraging run. Furthermore, olfactory landmarks associated with the nest enhance ants' homing abilities. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Sleep problems in bipolar disorders: more than just insomnia.

    Steinan, M K; Scott, J; Lagerberg, T V; Melle, I; Andreassen, O A; Vaaler, A E; Morken, G

    2016-05-01

    Sleep problems in bipolar disorder (BD) are common, but reported rates vary from 10% to 80%, depending on definitions, methodologies and management of potential confounding factors. This multicenter study seeks to address these issues and also compares BD cases with Hypersomnia as well as the more commonly investigated Insomnia and No Sleep Problem groups. A cross-sectional comparison of sleep profiles in 563 BD I and II individuals who participated in a structured assessment of demographic, clinical, illness history and treatment variables. Over 40% cases met criteria for Insomnia and 29% for Hypersomnia. In univariate analysis, Insomnia was associated with BD II depression whilst Hypersomnia was associated with BD I depression or euthymia. After controlling for confounders and covariates, it was demonstrated that Hypersomnia cases were significantly more likely to be younger, have BD I and be prescribed antidepressants whilst Insomnia cases had longer illness durations and were more likely to be prescribed benzodiazepines and hypnotics. Whilst Insomnia symptoms are common in BD, Hypersomnia is a significant, frequently underexplored problem. Detailed analyses of large representative clinical samples are critical to extending our knowledge of differences between subgroups defined by sleep profile. © 2015 The Authors. Acta Psychiatrica Scandinavica Published by John Wiley & Sons Ltd.

  12. Keeping education fresh-not just in microbiology.

    Fahnert, Beatrix

    2017-11-15

    Innovative practice from around the globe, addressing a range of recent educational themes and trends, was published in the FEMS Microbiology Letters virtual Thematic Issue 'Keeping Education Fresh' in October 2017. Its thought-provoking content is reviewed here to more directly facilitate reflections and discussions in the professional community. The focus is on best practice approaches when enhancing student engagement, how to adjust those to the diversity of learners, learning situations and infrastructures, and to a broad range of subjects. The need for authentic learning and to move away from didactic teaching is emphasized. The 'students as researchers' theme is featured e.g. in context of service learning. Creative approaches are presented such as using performing arts, popular culture and gamification. The development of interdisciplinary and intercultural competences, and the exploration of socioscientific themes and philosophical issues are considered. Revisions of curricula and programmes, reflective of educational advancements and sector drivers, are discussed from undergraduate to postgraduate and professional specialist level also in light of problem-based learning, interactive distance and on-campus learning, and even the legacy of Massive Open Online Courses. Such changes always require resources and skills, and carry risks. Yet, innovation is a risk worth taking to keep education fresh. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. "Everything just seems much more right in nature"

    Poulsen, Dorthe Varning; Stigsdotter, Ulrika K.; Djernis, Dorthe

    2016-01-01

    Available evidence shows that an increasing number of soldiers are seeking help for post-traumatic stress disorder. The post-traumatic stress disorder condition has big emotional and psychological consequences for the individual, his/her family and the society. Little research has been done...... to explore the impact of nature-based therapy for veterans with post-traumatic stress disorder although there is a growing amount of evidence pointing towards positive outcome. This qualitative study aims to achieve a deeper understanding of this relationship from the veteran’s perspective. Eight Danish...... veterans participated in a 10-week nature-based therapy. Qualitative interviews were conducted and analysed using the interpretative phenomenological method. The results indicated that the veterans have achieved tools to use in stressful situations and experienced an improvement in their post...

  14. Just Maps: The Geography Curriculum in English Schools

    Winter, Christine

    2007-01-01

    The wider context of this article is the assumption in the social sciences regarding the existence of a dichotomy between truth and objectivity on one hand and constructivism, subjectivism and relativism on the other. The school subject of geography serves as an appropriate focus for examining this assumption. There are three issues facing the…

  15. Epilepsy in School-Aged Children: More than Just Seizures?

    Reilly, Colin; Ballantine, Rebecca

    2011-01-01

    Epilepsy is the most common neurological disorder in childhood and can have a significant impact on a child's schooling. Children with epilepsy may have special educational needs due to having learning disability, specific learning difficulties, specific cognitive deficits or having symptoms associated with ASD, ADHD, depression or anxiety. These…

  16. Microcredit in Uganda: Fundamental Reform or Just another ...

    Microcredit is typically made available to women who would otherwise not have access to loans on reasonable terms. While some view microcredit as a revolutionary means of improving both the lives of women and the poor more generally, others argue it is a band aid approach to development, rooted in a neoliberal logic ...

  17. Dyslipidemia in systemic lupus erythematosus: just another comorbidity?

    Tselios, Konstantinos; Koumaras, Charalambos; Gladman, Dafna D; Urowitz, Murray B

    2016-04-01

    Among traditional atherosclerotic risk factors, dyslipidemia is believed to decisively affect the long-term prognosis of lupus patients, not only with regard to cardiovascular events but also by influencing other manifestations, such as lupus nephritis. The aim of this study was to review the epidemiology, pathogenesis, evidence for its impact on atherosclerosis manifestations and management of dyslipidemia in lupus patients. English-restricted MEDLINE database search (Medical Subject Headings: lupus or systemic lupus erythematosus and dyslipidemia or hyperlipidemia). The prevalence of dyslipidemia in systemic lupus erythematosus (SLE) ranges from 36% at diagnosis to 60% or even higher after 3 years, depending on definition. Multiple pathogenetic mechanisms are implicated, including antibodies against lipoprotein lipase and cytokines affecting the balance between pro- and anti-atherogenic lipoproteins. Dyslipidemia has a clear impact on clinical cardiovascular disease and surrogate markers for subclinical atherosclerosis. Moreover, it negatively affects end-organ damage (kidneys and brain). Treatment with statins yielded contradictory results as per minimizing cardiovascular risk. Dyslipidemia is a significant comorbidity of lupus patients with multiple negative effects in the long term. Its treatment represents a modifiable risk factor; prompt and adequate treatment can minimize unnecessary burden in lupus patients, thus reducing hospitalizations and their overall morbidity and mortality. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. Just Answer the Question: The Cryosphere in the Public Consciousness

    Beitler, J.; Serreze, M. C.; Meier, W.; Scambos, T.; Schaefer, K. M.

    2012-12-01

    The National Snow and Ice Data Center has helped tell the story of climate change as evidenced by dramatic changes in the cryosphere, notably the strong downward trend in summer Arctic sea ice cover. Today the state of the cryosphere is closely followed: in the media, by more than a million visitors annually to our Arctic Sea Ice News and Analysis, and through blogs and other sites that pick up and discuss our reports. The idea of sea ice decline as an indicator of climate change has entered the consciousness of the public. We engage a wide audience: journalists, meteorologists, skeptics, teachers, ordinary citizens, and scientists in other fields. Skeptic, neutral, or believer, they turn to us for information. While they do not always agree with our findings, we think they perceive us as honest brokers of scientific information—real progress from the days when scientists were perceived as a conspiracy of grant-chasers. NSIDC scientists have even been invited to do guest posts on skeptic blogs. What makes our communications work? What are the roles of old-fashioned communication strategies, recent climate communications research, social media, and solid scientific information? We track the shift in public perceptions of our data and research to present lessons learned over the last seven years, strategies that scientists can adopt now, and fodder for communications research.Arctic sea ice extent as of August 7, 2012, compared to the 1979-2000 median (orange line). Arctic sea ice extent as of August 7, 2012, along with daily ice extent data for the 2011 and for 2007, the record low year.

  19. Hv 1 Proton Channels in Dinoflagellates: Not Just for Bioluminescence?

    Kigundu, Gabriel; Cooper, Jennifer L; Smith, Susan M E

    2018-04-26

    Bioluminescence in dinoflagellates is controlled by H V 1 proton channels. Database searches of dinoflagellate transcriptomes and genomes yielded hits with sequence features diagnostic of all confirmed H V 1, and show that H V 1 is widely distributed in the dinoflagellate phylogeny including the basal species Oxyrrhis marina. Multiple sequence alignments followed by phylogenetic analysis revealed three major subfamilies of H V 1 that do not correlate with presence of theca, autotrophy, geographic location, or bioluminescence. These data suggest that most dinoflagellates express a H V 1 which has a function separate from bioluminescence. Sequence evidence also suggests that dinoflagellates can contain more than one H V 1 gene. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  20. Leadership in anesthesiology: not just a one man show

    Tjokorda GA Senapathi

    2017-05-01

    Full Text Available Anesthesiology had been one of highly skilled professional specialty with diversity of training but with a structured model of leadership culture. The culture which could be drawn back since medical training to become a medical doctor. School of medicine had already established a standard model of teaching and training. The tutoring method is implemented mostly based on classroom meetings in traditional basic lesson, bedside teaching for clerkship and internship and lately adopted method of case-based discussion

  1. Considering Time in Orthophotography Production: from a General Workflow to a Shortened Workflow for a Faster Disaster Response

    Lucas, G.

    2015-08-01

    This article overall deals with production time with orthophoto imagery with medium size digital frame camera. The workflow examination follows two main parts: data acquisition and post-processing. The objectives of the research are fourfold: 1/ gathering time references for the most important steps of orthophoto production (it turned out that literature is missing on this topic); these figures are used later for total production time estimation; 2/ identifying levers for reducing orthophoto production time; 3/ building a simplified production workflow for emergency response: less exigent with accuracy and faster; and compare it to a classical workflow; 4/ providing methodical elements for the estimation of production time with a custom project. In the data acquisition part a comprehensive review lists and describes all the factors that may affect the acquisition efficiency. Using a simulation with different variables (average line length, time of the turns, flight speed) their effect on acquisition efficiency is quantitatively examined. Regarding post-processing, the time references figures were collected from the processing of a 1000 frames case study with 15 cm GSD covering a rectangular area of 447 km2; the time required to achieve each step during the production is written down. When several technical options are possible, each one is tested and time documented so as all alternatives are available. Based on a technical choice with the workflow and using the compiled time reference of the elementary steps, a total time is calculated for the post-processing of the 1000 frames. Two scenarios are compared as regards to time and accuracy. The first one follows the "normal" practices, comprising triangulation, orthorectification and advanced mosaicking methods (feature detection, seam line editing and seam applicator); the second is simplified and make compromise over positional accuracy (using direct geo-referencing) and seamlines preparation in order to achieve

  2. Nanotechnology in periodontology – The future, or just another hype?

    Schlafer, Sebastian

    2014-01-01

    Nanotechnology allows manipulating matter at smaller and smaller level. Under appropriate conditions, molecules auto-assemble into nanometer-sized structures of higher order which exhibit chemical, physical and especially biological properties that differ from the bulk material. Custom-made nanom......Nanotechnology allows manipulating matter at smaller and smaller level. Under appropriate conditions, molecules auto-assemble into nanometer-sized structures of higher order which exhibit chemical, physical and especially biological properties that differ from the bulk material. Custom...... of nanotechnology and their application in a periodontal context, with a focus on biofilm control, site-specific drug release, and guided tissue regeneration....

  3. Aromatase in the brain: not just for reproduction anymore.

    Garcia-Segura, L M

    2008-06-01

    Aromatase, the enzyme that synthesises oestrogens from androgen precursors, is expressed in the brain, where it has been classically associated with the regulation of neuroendocrine events and behaviours linked with reproduction. Recent findings, however, have revealed new unexpected roles for brain aromatase, indicating that the enzyme regulates synaptic activity, synaptic plasticity, neurogenesis and the response of neural tissue to injury, and may contribute to control nonreproductive behaviours, mood and cognition. Therefore, the function of brain aromatase is not restricted to the regulation of reproduction as previously thought.

  4. Genetic enhancement in sport: just another form of doping?

    Mehlman, Maxwell J

    2012-12-01

    Patented genetic technologies such as the ACTN3 genetic test are adding a new dimension to the types of performance enhancement available to elite athletes. Organized sports organizations and governments are seeking to prevent athletes' use of biomedical enhancements. This paper discusses how these interdiction efforts will affect the use and availability of genetic technologies that can enhance athletic performance. The paper provides a working definition of enhancement, and in light of that definition and the concerns of the sports community, reviews genetic enhancement as a result of varied technologies, including, genetic testing to identify innate athletic ability, performance-enhancing drugs developed with genetic science and technology, pharmacogenetics, enhancement through reproductive technologies, somatic gene transfer, and germ line gene transfer.

  5. Just between us: Exclusive communications in online social networks.

    Carpenter, Jordan; Green, Melanie; Laflam, Jeff

    2018-01-01

    Social media websites such as Facebook are used for relationship development and maintenance often through self-disclosure and sharing of personal information. However, not all forms of social media communication may be equally suitable for this task. This paper explores users' norms about the appropriateness of using private vs. public Facebook messages to communicate different kinds of personal information, and the effectiveness of these types of communication in building relationships. Study 1, a survey, revealed that users endorse conflicting expectations about preferences for receiving information publicly or privately. Study 2, a field experiment testing the effects of private versus public Facebook communications on actual relationship development using participants' own Facebook pages, suggested that private messages lead to greater closeness.

  6. Inferior patellar pole fragmentation in children: just a normal variant?

    Kan, J.H.; Vogelius, Esben S.; Orth, Robert C.; Guillerman, R.P.; Jadhav, Siddharth P. [Texas Children' s Hospital, E.B. Singleton Pediatric Radiology, Houston, TX (United States)

    2015-06-15

    Fragmentary ossification of the inferior patella is often dismissed as a normal variant in children younger than 10 years of age. The purpose of this study was to determine whether fragmentary inferior patellar pole ossification is a normal variant or is associated with symptoms or signs of pathology using MRI and clinical exam findings as reference. A retrospective review was performed on 150 patients ages 5-10 years who underwent 164 knee radiography and MRI exams (45.1% male, mean age: 7.8 years). The presence or absence of inferior patellar pole fragmentation on radiography was correlated with the presence or absence of edema-like signal on MR images. Clinical notes were reviewed for the presence of symptoms or signs referable to the inferior patellar pole. These data were compared with a 1:1 age- and sex-matched control group without inferior pole fragmentation. Statistical analysis was performed using two-tailed t-tests. Forty of 164 (24.4%) knee radiographs showed fragmentary ossification of the inferior patella. Of these 40 knees, 62.5% (25/40) had edema-like signal of the inferior patellar bone marrow compared with 7.5% (3/40) of controls (P = 0.035). Patients with fragmentary ossification at the inferior patella had a significantly higher incidence of documented focal inferior patellar pain compared with controls (20% vs. 2.5%, P = 0.015). Inferior patellar pole fragmentation in children 5 to 10 years of age may be associated with localized symptoms and bone marrow edema-like signal and should not be routinely dismissed as a normal variant of ossification. (orig.)

  7. Indicators of dental anxiety in children just prior to treatment.

    Majstorovic, M; Morse, D E; Do, D; Lim, L l; Herman, N G; Moursi, A M

    2014-01-01

    We evaluated the relationship between child dental anxiety and selected child and parental characteristics. Children and their parents were interviewed at the New York University, College of Dentistry, Pediatric Dentistry Clinic. The Children's Fear Survey Schedule - Dental Subscale (CFSS-DS) evaluated child self-reported anxiety; the Modified Dental Anxiety Scale (MDAS) measured self-reported parental anxiety when the parent received dental treatment. Ninety-three children and their parents completed the questionnaires. Mean CFSS-DS scores were higher for girls than boys (32.5 vs. 26.3, p=0.003) and for children whose accompanying parents had MDAS scores of 11+ vs. ≥ 11 (32.8 vs. 26.6, p=0.001). There was little difference in mean CFSS-DS scores among those aged 6-10 yrs. vs. 11-14 yrs. (30.1 vs. 29.3). Significant correlations were found between CFSS-DS and both gender (Spearman's rho, rs=0.31) and MDAS scores (rs=0.33), but not between CFSS-DS and child age (rs=-0.05). Controlling simultaneously for gender, MDAS score and child age, a high CFSS-DS score (38+ vs. ≥ 38) was positively associated with girls (ORadj=3.76, 95% CI: 1.13-12.54) and an MDAS score of ≤ 15 vs. ≥ 11 (ORadj=2.50, 0.73-8.54), but weakly and inversely associated with age (ORadj=0.80, 0.25-2.52). Child gender and parental anxiety are indicators of child dental anxiety.

  8. Short time ahead wind power production forecast

    Sapronova, Alla; Meissner, Catherine; Mana, Matteo

    2016-01-01

    An accurate prediction of wind power output is crucial for efficient coordination of cooperative energy production from different sources. Long-time ahead prediction (from 6 to 24 hours) of wind power for onshore parks can be achieved by using a coupled model that would bridge the mesoscale weather prediction data and computational fluid dynamics. When a forecast for shorter time horizon (less than one hour ahead) is anticipated, an accuracy of a predictive model that utilizes hourly weather data is decreasing. That is because the higher frequency fluctuations of the wind speed are lost when data is averaged over an hour. Since the wind speed can vary up to 50% in magnitude over a period of 5 minutes, the higher frequency variations of wind speed and direction have to be taken into account for an accurate short-term ahead energy production forecast. In this work a new model for wind power production forecast 5- to 30-minutes ahead is presented. The model is based on machine learning techniques and categorization approach and using the historical park production time series and hourly numerical weather forecast. (paper)

  9. Short time ahead wind power production forecast

    Sapronova, Alla; Meissner, Catherine; Mana, Matteo

    2016-09-01

    An accurate prediction of wind power output is crucial for efficient coordination of cooperative energy production from different sources. Long-time ahead prediction (from 6 to 24 hours) of wind power for onshore parks can be achieved by using a coupled model that would bridge the mesoscale weather prediction data and computational fluid dynamics. When a forecast for shorter time horizon (less than one hour ahead) is anticipated, an accuracy of a predictive model that utilizes hourly weather data is decreasing. That is because the higher frequency fluctuations of the wind speed are lost when data is averaged over an hour. Since the wind speed can vary up to 50% in magnitude over a period of 5 minutes, the higher frequency variations of wind speed and direction have to be taken into account for an accurate short-term ahead energy production forecast. In this work a new model for wind power production forecast 5- to 30-minutes ahead is presented. The model is based on machine learning techniques and categorization approach and using the historical park production time series and hourly numerical weather forecast.

  10. Electric energy production and environmental licensing: citizenship in Brazil in time of ecological crisis

    Bettencourt, Marcia Pires da Luz

    2017-01-01

    The choices of energy sources gain relevance in the face of the ecological crisis which has a central questioning on the modes of production and consumption and that stems from a system which changes everything into merchandise. On one hand, brazilian electricity generation has the advantage of using clean energy in great part of its composition, at least in discourse. On the other hand, though, there are high social and environmental costs, especially for communities living near the regions where projects for the electricity sector are built. This research aimed to identify and analyse different modes society takes part in the process of choosing energy sources for electricity generation in Brazil. It discusses the links between the ecological crisis and the production of electrical energy; how the institutional mechanisms for social participation on issues related to the production of electric power in Brazil work; and, how civil society participates in environmental licensing in the National Environment Council (CONAMA). A set of related approaches to the nature of the ecological crisis and the forms of social participation was adopted in the theoretical framework and an analysis of the electric sector panorama in Brazil has been drawn up. In order to investigate the forms society participates in issues related to the composition of the brazilian electricity matrix, the methodology comprised a documentary analysis and a case study. They included three categories of actors: (1) CONAMA's councilors, (2) experts from the Field; and (3) actors involved in the diagnosis study, planning and management of the electricity sector. The research identified inconsistencies, ambiguities and other relevant issues about the participation of society in the production of electrical energy. Such issues are related to: deficiencies in the mechanisms for information access; lack of transparency and patterns in internal documents; lack of social participation in the elaboration of

  11. Influence of dispatching rules on average production lead time for multi-stage production systems.

    Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

    2013-08-01

    In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

  12. Characteristics and fates of soluble microbial products in ceramic membrane bioreactor at various sludge retention times.

    Shin, Hang-Sik; Kang, Seok-Tae

    2003-01-01

    The formation and fate of soluble microbial products (SMP) in membrane bioreactor (MBR) was investigated at various sludge retention times (SRT) for 170 days. The SMP concentration was estimated by feeding glucose, which could be completely degraded, and by measuring the dissolved organic carbon (DOC) of the effluent from MBR. Under the conditions of SRT of 20 days, influent DOC of 112 mg/l and HRT of 6 h, the produced SMP was 4.7 mg DOC/l of which 57% was removed or retained by the membrane. DOC of MBR supernatant increased during 100 days and then gradually decreased. Specific UV absorbance showed that the accumulated compounds had a portion of larger, more aromatic, more hydrophobic and double-bond-rich organics, which originated from the decayed biomass. Molecular weight distributions of SMP in MBR supernatant showed that the acclimated microorganisms in a long SRT could decompose high molecular weight organics, it caused the shift of molecular weight distributions of SMP to a lower range. During the operation period, enumeration of active cells in the MBR showed that microbial inhibitions by accumulated SMP was not observed.

  13. Fluence of Product Leaflets on Purchasing Behaviour in Times of Crisis

    Halina Starzyczná

    2015-01-01

    Full Text Available This paper presents partial results of primary research on consumer purchasing behaviour with regards to the utilization of product leaflets. It deals with the consumer reaction on the use of these leaflets. The main goal is to assess the impulse to purchase goods on the basis of promotional leaflets in mailboxes, depending on the personal characteristics of the consumer. Partial goals are a brief theoretical basis of the examined issues and selected results of secondary research on consumer behaviour based on available statistical data and information. Consumer behaviour changes drastically in times of crisis. Czech consumer is addressed daily by a specific communication media of store chains – the leaflets. These appear daily in mailboxes and are generally positively accepted. There are also negative opinions, both from consumers as well as the EU. Respondents were asked about their financial situation, to what extent they change their buying behaviour with respect to the income level of households. It turned out that the impulse to purchase goods on the basis of promotional leaflets in mailboxes does not depend on the age and sex of respondents, but depends on the income level and education. The largest proportion of respondents considers leaflets because of promotional discounts.

  14. [Structure identification of contaminants in a beverage product by liquid chromatography coupled with quadrupole time-of-flight mass spectrometry].

    Miyamoto, Yasuhisa; Washida, Kazuto; Uyama, Atsuo; Mochizuki, Naoki

    2014-01-01

    The contaminants in a beverage product that had been reported to have a strange taste were identified. By comparative analysis with the normal product using liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (LC-QTOF-MS), six unknown compounds were detected in the total ion current chromatograms of the product in question. Detailed analysis of the mass spectra and product ion spectra of these compounds strongly suggested that the compounds were capric acid diethanolamide, lauric acid diethanolamide, myristic acid diethanolamide, lauryl dimethylaminoacetic acid, lauryl sulfate, and lauric acid, all of which are surfactants commonly used as ingredients of household detergents and shampoos. We searched commercially available detergent products to check for the presence of these six surfactants, and identified products that might have been intentionally or unintentionally mixed into the beverage product after opening.

  15. Relationships among gas production, end products of rumen fermentation and microbial N produced in vitro at two incubation times

    Cattani, Mirko; Maccarana, Laura; Hansen, Hanne Helene

    2013-01-01

    at 48 h. At t½, the valerate content in rumen fl uid was negligible. However, relatively large amounts of valerate were measured after 48 h, probably the result of microbial lysis. Results suggest that relationships among end-products of rumen fermentation can be more accurately evaluated at a substrate...... for ammonia N (N-NH3), volatile fatty acids (VFA), residual NDF and N bound to residual NDF (N-NDF). Values of GP were also predicted from VFA. Microbial N (MN) was computed as the difference between N present at the beginning and at the end of incubation. At 48 h, the relationship between GP measured...

  16. Attitudes toward victim and victimization in the light of the just world theory

    Simeunović-Patić Biljana

    2017-01-01

    Full Text Available The present paper discusses current empirical status of the Just world theory introduced several decades ago by Melvin Lerner, the content and functions of a just world belief as its central construct, and particularly, the relation between a just world belief and victim blaming and victim derogation phenomena. In the light of existing research evidence, a just world belief and a need to re-establish a “justice” when this belief is threatened, is considered to be an adaptive mechanism that protect a belief that a world is secure and the future is predictable, as well as a confidence in the purposefulness of selfdiscipline, long-term personal investments and social rules respecting. As proposed By the just world theory, when a person faces injustice, i.e. others’ (innocent victims’ suffering, his/her belief in a just world is threatened. Possible reactions to that threat comprise various rational victim helping activities, but also specific cognitive defensive strategies, including cognitive distortion, rationalization and reinterpretation of an event in order to minimize injustice or deny injustice happened at all. In the course of reinterpretation of injustice, victims are often blamed for their former actions, or derogated for their character, in order to indicate them responsible for their own fate and suffering. The findings of research studies suggest that the likelihood of employing cognitive defensive strategies rises if formal responses to crime and victimization lack or fail. This further suggests that an efficient and effective formal social response in terms of both sanctioning of offenders and reparation of victims should be considered highly important in reducing the risk of stigmatization and rejection of victims. Finally, the paper discusses the role of victim’s just world beliefs in post-trauma adaptation and coping processes. In virtue of findings from the existing research literature it may be concluded that victim

  17. The search for possible time variations in Davis' measurements of the argon production rate in the solar neutrino experiment

    Haubold, H.J.; Gerth, E.

    1985-01-01

    With the gradual accumulation of experimental data in the solar neutrino experiment of Davis and collaborators (runs 18-74 for 1970-1982), the question, whether there are time variations of the solar neutrino flux, is of renewed interest. We discuss the mathematical-numerical methods applied to the statistical analysis of Davis' argon-37 production rate up till now known in the literature. These methods are characterized by the arbitrary arrangement of the Davis data in a time series. We perform a certain Fourier transformation for unequally-spaced time series of the measuring data of the argon-37 production rate, discuss the discovered periods and give significance criteria with respect to each period. We find that all periods discussed in the literature are contained in our series of periods. Pointing out the more mathematical character of the time series analysis we emphasize the predominant significance of the detected periods. (author)

  18. Production, staff, working time and financial planning

    Orlando Boiteux

    2009-07-01

    Full Text Available Aggregate planning can be a tool for coordinating the tactical decisions belonging to some functional areas of a company. This potential has been limited due to methodological and technical reasons, but nowadays it is possible to solve very sophisticated models integrating, with a high level of detail, a great number of decisions of several functional areas and that permit to include new management schemes. In this paper, a production, staff, working time and cash management model is introduced.

  19. Word Order and Voice Influence the Timing of Verb Planning in German Sentence Production

    Sebastian Sauppe

    2017-09-01

    Full Text Available Theories of incremental sentence production make different assumptions about when speakers encode information about described events and when verbs are selected, accordingly. An eye tracking experiment on German testing the predictions from linear and hierarchical incrementality about the timing of event encoding and verb planning is reported. In the experiment, participants described depictions of two-participant events with sentences that differed in voice and word order. Verb-medial active sentences and actives and passives with sentence-final verbs were compared. Linear incrementality predicts that sentences with verbs placed early differ from verb-final sentences because verbs are assumed to only be planned shortly before they are articulated. By contrast, hierarchical incrementality assumes that speakers start planning with relational encoding of the event. A weak version of hierarchical incrementality assumes that only the action is encoded at the outset of formulation and selection of lexical verbs only occurs shortly before they are articulated, leading to the prediction of different fixation patterns for verb-medial and verb-final sentences. A strong version of hierarchical incrementality predicts no differences between verb-medial and verb-final sentences because it assumes that verbs are always lexically selected early in the formulation process. Based on growth curve analyses of fixations to agent and patient characters in the described pictures, and the influence of character humanness and the lack of an influence of the visual salience of characters on speakers' choice of active or passive voice, the current results suggest that while verb planning does not necessarily occur early during formulation, speakers of German always create an event representation early.

  20. Word Order and Voice Influence the Timing of Verb Planning in German Sentence Production.

    Sauppe, Sebastian

    2017-01-01

    Theories of incremental sentence production make different assumptions about when speakers encode information about described events and when verbs are selected, accordingly. An eye tracking experiment on German testing the predictions from linear and hierarchical incrementality about the timing of event encoding and verb planning is reported. In the experiment, participants described depictions of two-participant events with sentences that differed in voice and word order. Verb-medial active sentences and actives and passives with sentence-final verbs were compared. Linear incrementality predicts that sentences with verbs placed early differ from verb-final sentences because verbs are assumed to only be planned shortly before they are articulated. By contrast, hierarchical incrementality assumes that speakers start planning with relational encoding of the event. A weak version of hierarchical incrementality assumes that only the action is encoded at the outset of formulation and selection of lexical verbs only occurs shortly before they are articulated, leading to the prediction of different fixation patterns for verb-medial and verb-final sentences. A strong version of hierarchical incrementality predicts no differences between verb-medial and verb-final sentences because it assumes that verbs are always lexically selected early in the formulation process. Based on growth curve analyses of fixations to agent and patient characters in the described pictures, and the influence of character humanness and the lack of an influence of the visual salience of characters on speakers' choice of active or passive voice, the current results suggest that while verb planning does not necessarily occur early during formulation, speakers of German always create an event representation early.